IfcMaterial ComplexProperties #45
Comments
diff -N -w -U10 tmp/a/psd/Pset_MaterialWoodBasedBeam.xml tmp/b/psd/Pset_MaterialWoodBasedBeam.xml
--- tmp/a/psd/Pset_MaterialWoodBasedBeam.xml 2022-02-06 16:41:35.229598200 +0100
+++ tmp/b/psd/Pset_MaterialWoodBasedBeam.xml 1970-01-01 01:00:00.000000000 +0100
@@ -1,503 +0,0 @@
-<?xml version="1.0" ?>
-<PropertySetDef xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" templatetype="PSET_TYPEDRIVENOVERRIDE" xsi:noNamespaceSchemaLocation="http://buildingSMART-tech.org/xml/psd/PSD_IFC4.xsd">
- <IfcVersion version="IFC4X3_DEV"/>
- <Name>Pset_MaterialWoodBasedBeam</Name>
- <Definition>This is a collection of mechanical properties applicable to wood-based materials for beam-like products, especially laminated materials like glulam and LVL.
-Anisotropy of such materials is taken into account by different properties according to grain direction and load types.
-
-All values shall be given for a standardized service condition, a standardized load duration and a standardized reference size of the member according to local design codes.
-
-NOTE: In cases where mechanical material properties are graduated for different given reference sizes, separate instances of IfcExtendedMaterialProperties and IfcMaterial have to be used for each required graduation. Mechanically differing versions of a material are treated as different materials.
-
-References to the orientation of grain or lay-up correspond to material orientation given by geometrical or topological representation of element objects or types, especially IfcMemberType and IfcStructuralMember.</Definition>
- <Applicability/>
- <ApplicableClasses>
- <ClassName>IfcMaterial</ClassName>
- </ApplicableClasses>
- <ApplicableTypeValue>IfcMaterial</ApplicableTypeValue>
- <PropertyDefs>
- <PropertyDef>
- <Name>ApplicableStructuralDesignMethod</Name>
- <Definition>Determines whether mechanical material properties are applicable to 'ASD' = allowable stress design (working stress design), 'LSD' = limit state design, or 'LRFD' = load and resistance factor design.</Definition>
- <PropertyType>
- <TypePropertySingleValue>
- <DataType type="IfcLabel"/>
- </TypePropertySingleValue>
- </PropertyType>
- </PropertyDef>
- <PropertyDef>
- <Name>InPlane</Name>
- <Definition/>
- <PropertyType>
- <TypeComplexProperty name="CP_MaterialMechanicalBeam">
- <PropertyDef>
- <Name>YoungModulus</Name>
- <Definition/>
- <PropertyType>
- <TypePropertySingleValue>
- <DataType type="IfcModulusOfElasticityMeasure"/>
- </TypePropertySingleValue>
- </PropertyType>
- </PropertyDef>
- <PropertyDef>
- <Name>YoungModulusMin</Name>
- <Definition/>
- <PropertyType>
- <TypePropertySingleValue>
- <DataType type="IfcModulusOfElasticityMeasure"/>
- </TypePropertySingleValue>
- </PropertyType>
- </PropertyDef>
- <PropertyDef>
- <Name>YoungModulusPerp</Name>
- <Definition/>
- <PropertyType>
- <TypePropertySingleValue>
- <DataType type="IfcModulusOfElasticityMeasure"/>
- </TypePropertySingleValue>
- </PropertyType>
- </PropertyDef>
- <PropertyDef>
- <Name>YoungModulusPerpMin</Name>
- <Definition/>
- <PropertyType>
- <TypePropertySingleValue>
- <DataType type="IfcModulusOfElasticityMeasure"/>
- </TypePropertySingleValue>
- </PropertyType>
- </PropertyDef>
- <PropertyDef>
- <Name>ShearModulus</Name>
- <Definition/>
- <PropertyType>
- <TypePropertySingleValue>
- <DataType type="IfcModulusOfElasticityMeasure"/>
- </TypePropertySingleValue>
- </PropertyType>
- </PropertyDef>
- <PropertyDef>
- <Name>ShearModulusMin</Name>
- <Definition/>
- <PropertyType>
- <TypePropertySingleValue>
- <DataType type="IfcModulusOfElasticityMeasure"/>
- </TypePropertySingleValue>
- </PropertyType>
- </PropertyDef>
- <PropertyDef>
- <Name>BendingStrength</Name>
- <Definition/>
- <PropertyType>
- <TypePropertySingleValue>
- <DataType type="IfcPressureMeasure"/>
- </TypePropertySingleValue>
- </PropertyType>
- </PropertyDef>
- <PropertyDef>
- <Name>TensileStrength</Name>
- <Definition/>
- <PropertyType>
- <TypePropertySingleValue>
- <DataType type="IfcPressureMeasure"/>
- </TypePropertySingleValue>
- </PropertyType>
- </PropertyDef>
- <PropertyDef>
- <Name>TensileStrengthPerp</Name>
- <Definition/>
- <PropertyType>
- <TypePropertySingleValue>
- <DataType type="IfcPressureMeasure"/>
- </TypePropertySingleValue>
- </PropertyType>
- </PropertyDef>
- <PropertyDef>
- <Name>CompStrength</Name>
- <Definition/>
- <PropertyType>
- <TypePropertySingleValue>
- <DataType type="IfcPressureMeasure"/>
- </TypePropertySingleValue>
- </PropertyType>
- </PropertyDef>
- <PropertyDef>
- <Name>CompStrengthPerp</Name>
- <Definition/>
- <PropertyType>
- <TypePropertySingleValue>
- <DataType type="IfcPressureMeasure"/>
- </TypePropertySingleValue>
- </PropertyType>
- </PropertyDef>
- <PropertyDef>
- <Name>RaisedCompStrengthPerp</Name>
- <Definition/>
- <PropertyType>
- <TypePropertySingleValue>
- <DataType type="IfcPressureMeasure"/>
- </TypePropertySingleValue>
- </PropertyType>
- </PropertyDef>
- <PropertyDef>
- <Name>ShearStrength</Name>
- <Definition/>
- <PropertyType>
- <TypePropertySingleValue>
- <DataType type="IfcPressureMeasure"/>
- </TypePropertySingleValue>
- </PropertyType>
- </PropertyDef>
- <PropertyDef>
- <Name>TorsionalStrength</Name>
- <Definition/>
- <PropertyType>
- <TypePropertySingleValue>
- <DataType type="IfcPressureMeasure"/>
- </TypePropertySingleValue>
- </PropertyType>
- </PropertyDef>
- <PropertyDef>
- <Name>ReferenceDepth</Name>
- <Definition/>
- <PropertyType>
- <TypePropertySingleValue>
- <DataType type="IfcPositiveLengthMeasure"/>
- </TypePropertySingleValue>
- </PropertyType>
- </PropertyDef>
- <PropertyDef>
- <Name>InstabilityFactors</Name>
- <Definition/>
- <PropertyType>
- <TypePropertyTableValue>
- <Expression/>
- <DefiningValue>
- <DataType type="IfcPositiveRatioMeasure"/>
- </DefiningValue>
- <DefinedValue>
- <DataType type="IfcPositiveRatioMeasure"/>
- </DefinedValue>
- </TypePropertyTableValue>
- </PropertyType>
- </PropertyDef>
- </TypeComplexProperty>
- </PropertyType>
- </PropertyDef>
- <PropertyDef>
- <Name>InPlaneNegative</Name>
- <Definition/>
- <PropertyType>
- <TypeComplexProperty name="CP_MaterialMechanicalBeam">
- <PropertyDef>
- <Name>YoungModulus</Name>
- <Definition/>
- <PropertyType>
- <TypePropertySingleValue>
- <DataType type="IfcModulusOfElasticityMeasure"/>
- </TypePropertySingleValue>
- </PropertyType>
- </PropertyDef>
- <PropertyDef>
- <Name>YoungModulusMin</Name>
- <Definition/>
- <PropertyType>
- <TypePropertySingleValue>
- <DataType type="IfcModulusOfElasticityMeasure"/>
- </TypePropertySingleValue>
- </PropertyType>
- </PropertyDef>
- <PropertyDef>
- <Name>YoungModulusPerp</Name>
- <Definition/>
- <PropertyType>
- <TypePropertySingleValue>
- <DataType type="IfcModulusOfElasticityMeasure"/>
- </TypePropertySingleValue>
- </PropertyType>
- </PropertyDef>
- <PropertyDef>
- <Name>YoungModulusPerpMin</Name>
- <Definition/>
- <PropertyType>
- <TypePropertySingleValue>
- <DataType type="IfcModulusOfElasticityMeasure"/>
- </TypePropertySingleValue>
- </PropertyType>
- </PropertyDef>
- <PropertyDef>
- <Name>ShearModulus</Name>
- <Definition/>
- <PropertyType>
- <TypePropertySingleValue>
- <DataType type="IfcModulusOfElasticityMeasure"/>
- </TypePropertySingleValue>
- </PropertyType>
- </PropertyDef>
- <PropertyDef>
- <Name>ShearModulusMin</Name>
- <Definition/>
- <PropertyType>
- <TypePropertySingleValue>
- <DataType type="IfcModulusOfElasticityMeasure"/>
- </TypePropertySingleValue>
- </PropertyType>
- </PropertyDef>
- <PropertyDef>
- <Name>BendingStrength</Name>
- <Definition/>
- <PropertyType>
- <TypePropertySingleValue>
- <DataType type="IfcPressureMeasure"/>
- </TypePropertySingleValue>
- </PropertyType>
- </PropertyDef>
- <PropertyDef>
- <Name>TensileStrength</Name>
- <Definition/>
- <PropertyType>
- <TypePropertySingleValue>
- <DataType type="IfcPressureMeasure"/>
- </TypePropertySingleValue>
- </PropertyType>
- </PropertyDef>
- <PropertyDef>
- <Name>TensileStrengthPerp</Name>
- <Definition/>
- <PropertyType>
- <TypePropertySingleValue>
- <DataType type="IfcPressureMeasure"/>
- </TypePropertySingleValue>
- </PropertyType>
- </PropertyDef>
- <PropertyDef>
- <Name>CompStrength</Name>
- <Definition/>
- <PropertyType>
- <TypePropertySingleValue>
- <DataType type="IfcPressureMeasure"/>
- </TypePropertySingleValue>
- </PropertyType>
- </PropertyDef>
- <PropertyDef>
- <Name>CompStrengthPerp</Name>
- <Definition/>
- <PropertyType>
- <TypePropertySingleValue>
- <DataType type="IfcPressureMeasure"/>
- </TypePropertySingleValue>
- </PropertyType>
- </PropertyDef>
- <PropertyDef>
- <Name>RaisedCompStrengthPerp</Name>
- <Definition/>
- <PropertyType>
- <TypePropertySingleValue>
- <DataType type="IfcPressureMeasure"/>
- </TypePropertySingleValue>
- </PropertyType>
- </PropertyDef>
- <PropertyDef>
- <Name>ShearStrength</Name>
- <Definition/>
- <PropertyType>
- <TypePropertySingleValue>
- <DataType type="IfcPressureMeasure"/>
- </TypePropertySingleValue>
- </PropertyType>
- </PropertyDef>
- <PropertyDef>
- <Name>TorsionalStrength</Name>
- <Definition/>
- <PropertyType>
- <TypePropertySingleValue>
- <DataType type="IfcPressureMeasure"/>
- </TypePropertySingleValue>
- </PropertyType>
- </PropertyDef>
- <PropertyDef>
- <Name>ReferenceDepth</Name>
- <Definition/>
- <PropertyType>
- <TypePropertySingleValue>
- <DataType type="IfcPositiveLengthMeasure"/>
- </TypePropertySingleValue>
- </PropertyType>
- </PropertyDef>
- <PropertyDef>
- <Name>InstabilityFactors</Name>
- <Definition/>
- <PropertyType>
- <TypePropertyTableValue>
- <Expression/>
- <DefiningValue>
- <DataType type="IfcPositiveRatioMeasure"/>
- </DefiningValue>
- <DefinedValue>
- <DataType type="IfcPositiveRatioMeasure"/>
- </DefinedValue>
- </TypePropertyTableValue>
- </PropertyType>
- </PropertyDef>
- </TypeComplexProperty>
- </PropertyType>
- </PropertyDef>
- <PropertyDef>
- <Name>OutOfPlane</Name>
- <Definition/>
- <PropertyType>
- <TypeComplexProperty name="CP_MaterialMechanicalBeam">
- <PropertyDef>
- <Name>YoungModulus</Name>
- <Definition/>
- <PropertyType>
- <TypePropertySingleValue>
- <DataType type="IfcModulusOfElasticityMeasure"/>
- </TypePropertySingleValue>
- </PropertyType>
- </PropertyDef>
- <PropertyDef>
- <Name>YoungModulusMin</Name>
- <Definition/>
- <PropertyType>
- <TypePropertySingleValue>
- <DataType type="IfcModulusOfElasticityMeasure"/>
- </TypePropertySingleValue>
- </PropertyType>
- </PropertyDef>
- <PropertyDef>
- <Name>YoungModulusPerp</Name>
- <Definition/>
- <PropertyType>
- <TypePropertySingleValue>
- <DataType type="IfcModulusOfElasticityMeasure"/>
- </TypePropertySingleValue>
- </PropertyType>
- </PropertyDef>
- <PropertyDef>
- <Name>YoungModulusPerpMin</Name>
- <Definition/>
- <PropertyType>
- <TypePropertySingleValue>
- <DataType type="IfcModulusOfElasticityMeasure"/>
- </TypePropertySingleValue>
- </PropertyType>
- </PropertyDef>
- <PropertyDef>
- <Name>ShearModulus</Name>
- <Definition/>
- <PropertyType>
- <TypePropertySingleValue>
- <DataType type="IfcModulusOfElasticityMeasure"/>
- </TypePropertySingleValue>
- </PropertyType>
- </PropertyDef>
- <PropertyDef>
- <Name>ShearModulusMin</Name>
- <Definition/>
- <PropertyType>
- <TypePropertySingleValue>
- <DataType type="IfcModulusOfElasticityMeasure"/>
- </TypePropertySingleValue>
- </PropertyType>
- </PropertyDef>
- <PropertyDef>
- <Name>BendingStrength</Name>
- <Definition/>
- <PropertyType>
- <TypePropertySingleValue>
- <DataType type="IfcPressureMeasure"/>
- </TypePropertySingleValue>
- </PropertyType>
- </PropertyDef>
- <PropertyDef>
- <Name>TensileStrength</Name>
- <Definition/>
- <PropertyType>
- <TypePropertySingleValue>
- <DataType type="IfcPressureMeasure"/>
- </TypePropertySingleValue>
- </PropertyType>
- </PropertyDef>
- <PropertyDef>
- <Name>TensileStrengthPerp</Name>
- <Definition/>
- <PropertyType>
- <TypePropertySingleValue>
- <DataType type="IfcPressureMeasure"/>
- </TypePropertySingleValue>
- </PropertyType>
- </PropertyDef>
- <PropertyDef>
- <Name>CompStrength</Name>
- <Definition/>
- <PropertyType>
- <TypePropertySingleValue>
- <DataType type="IfcPressureMeasure"/>
- </TypePropertySingleValue>
- </PropertyType>
- </PropertyDef>
- <PropertyDef>
- <Name>CompStrengthPerp</Name>
- <Definition/>
- <PropertyType>
- <TypePropertySingleValue>
- <DataType type="IfcPressureMeasure"/>
- </TypePropertySingleValue>
- </PropertyType>
- </PropertyDef>
- <PropertyDef>
- <Name>RaisedCompStrengthPerp</Name>
- <Definition/>
- <PropertyType>
- <TypePropertySingleValue>
- <DataType type="IfcPressureMeasure"/>
- </TypePropertySingleValue>
- </PropertyType>
- </PropertyDef>
- <PropertyDef>
- <Name>ShearStrength</Name>
- <Definition/>
- <PropertyType>
- <TypePropertySingleValue>
- <DataType type="IfcPressureMeasure"/>
- </TypePropertySingleValue>
- </PropertyType>
- </PropertyDef>
- <PropertyDef>
- <Name>TorsionalStrength</Name>
- <Definition/>
- <PropertyType>
- <TypePropertySingleValue>
- <DataType type="IfcPressureMeasure"/>
- </TypePropertySingleValue>
- </PropertyType>
- </PropertyDef>
- <PropertyDef>
- <Name>ReferenceDepth</Name>
- <Definition/>
- <PropertyType>
- <TypePropertySingleValue>
- <DataType type="IfcPositiveLengthMeasure"/>
- </TypePropertySingleValue>
- </PropertyType>
- </PropertyDef>
- <PropertyDef>
- <Name>InstabilityFactors</Name>
- <Definition/>
- <PropertyType>
- <TypePropertyTableValue>
- <Expression/>
- <DefiningValue>
- <DataType type="IfcPositiveRatioMeasure"/>
- </DefiningValue>
- <DefinedValue>
- <DataType type="IfcPositiveRatioMeasure"/>
- </DefinedValue>
- </TypePropertyTableValue>
- </PropertyType>
- </PropertyDef>
- </TypeComplexProperty>
- </PropertyType>
- </PropertyDef>
- </PropertyDefs>
-</PropertySetDef> |
diff -N -w -U10 tmp/a/psd/Pset_MaterialWoodBasedPanel.xml tmp/b/psd/Pset_MaterialWoodBasedPanel.xml
--- tmp/a/psd/Pset_MaterialWoodBasedPanel.xml 2022-02-06 16:41:35.287482500 +0100
+++ tmp/b/psd/Pset_MaterialWoodBasedPanel.xml 1970-01-01 01:00:00.000000000 +0100
@@ -1,469 +0,0 @@
-<?xml version="1.0" ?>
-<PropertySetDef xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" templatetype="PSET_TYPEDRIVENOVERRIDE" xsi:noNamespaceSchemaLocation="http://buildingSMART-tech.org/xml/psd/PSD_IFC4.xsd">
- <IfcVersion version="IFC4X3_DEV"/>
- <Name>Pset_MaterialWoodBasedPanel</Name>
- <Definition>This is a collection of mechanical properties related to wood-based materials for panel-like products like plywood or OSB. The propositions given above for wood-based beam materials with respect to anisotropy, strength graduation according to element sizes (especially panel thickness) apply accordingly.</Definition>
- <Applicability/>
- <ApplicableClasses>
- <ClassName>IfcMaterial</ClassName>
- </ApplicableClasses>
- <ApplicableTypeValue>IfcMaterial</ApplicableTypeValue>
- <PropertyDefs>
- <PropertyDef>
- <Name>ApplicableStructuralDesignMethod</Name>
- <Definition>Determines whether mechanical material properties are applicable to 'ASD' = allowable stress design (working stress design), 'LSD' = limit state design, or 'LRFD' = load and resistance factor design.</Definition>
- <PropertyType>
- <TypePropertySingleValue>
- <DataType type="IfcLabel"/>
- </TypePropertySingleValue>
- </PropertyType>
- </PropertyDef>
- <PropertyDef>
- <Name>InPlane</Name>
- <Definition/>
- <PropertyType>
- <TypeComplexProperty name="CP_MaterialMechanicalPanel">
- <PropertyDef>
- <Name>YoungModulusBending</Name>
- <Definition/>
- <PropertyType>
- <TypePropertyTableValue>
- <Expression/>
- <DefiningValue>
- <DataType type="IfcPositivePlaneAngleMeasure"/>
- </DefiningValue>
- <DefinedValue>
- <DataType type="IfcModulusOfElasticityMeasure"/>
- </DefinedValue>
- </TypePropertyTableValue>
- </PropertyType>
- </PropertyDef>
- <PropertyDef>
- <Name>YoungModulusTension</Name>
- <Definition/>
- <PropertyType>
- <TypePropertyTableValue>
- <Expression/>
- <DefiningValue>
- <DataType type="IfcPositivePlaneAngleMeasure"/>
- </DefiningValue>
- <DefinedValue>
- <DataType type="IfcModulusOfElasticityMeasure"/>
- </DefinedValue>
- </TypePropertyTableValue>
- </PropertyType>
- </PropertyDef>
- <PropertyDef>
- <Name>YoungModulusCompression</Name>
- <Definition/>
- <PropertyType>
- <TypePropertySingleValue>
- <DataType type="IfcModulusOfElasticityMeasure"/>
- </TypePropertySingleValue>
- </PropertyType>
- </PropertyDef>
- <PropertyDef>
- <Name>ShearModulus</Name>
- <Definition/>
- <PropertyType>
- <TypePropertySingleValue>
- <DataType type="IfcModulusOfElasticityMeasure"/>
- </TypePropertySingleValue>
- </PropertyType>
- </PropertyDef>
- <PropertyDef>
- <Name>BendingStrength</Name>
- <Definition/>
- <PropertyType>
- <TypePropertyTableValue>
- <Expression/>
- <DefiningValue>
- <DataType type="IfcPositivePlaneAngleMeasure"/>
- </DefiningValue>
- <DefinedValue>
- <DataType type="IfcPressureMeasure"/>
- </DefinedValue>
- </TypePropertyTableValue>
- </PropertyType>
- </PropertyDef>
- <PropertyDef>
- <Name>CompressiveStrength</Name>
- <Definition/>
- <PropertyType>
- <TypePropertyTableValue>
- <Expression/>
- <DefiningValue>
- <DataType type="IfcPositivePlaneAngleMeasure"/>
- </DefiningValue>
- <DefinedValue>
- <DataType type="IfcPressureMeasure"/>
- </DefinedValue>
- </TypePropertyTableValue>
- </PropertyType>
- </PropertyDef>
- <PropertyDef>
- <Name>TensileStrength</Name>
- <Definition/>
- <PropertyType>
- <TypePropertyTableValue>
- <Expression/>
- <DefiningValue>
- <DataType type="IfcPositivePlaneAngleMeasure"/>
- </DefiningValue>
- <DefinedValue>
- <DataType type="IfcPressureMeasure"/>
- </DefinedValue>
- </TypePropertyTableValue>
- </PropertyType>
- </PropertyDef>
- <PropertyDef>
- <Name>ShearStrength</Name>
- <Definition/>
- <PropertyType>
- <TypePropertyTableValue>
- <Expression/>
- <DefiningValue>
- <DataType type="IfcPositivePlaneAngleMeasure"/>
- </DefiningValue>
- <DefinedValue>
- <DataType type="IfcPressureMeasure"/>
- </DefinedValue>
- </TypePropertyTableValue>
- </PropertyType>
- </PropertyDef>
- <PropertyDef>
- <Name>BearingStrength</Name>
- <Definition/>
- <PropertyType>
- <TypePropertyTableValue>
- <Expression/>
- <DefiningValue>
- <DataType type="IfcPositivePlaneAngleMeasure"/>
- </DefiningValue>
- <DefinedValue>
- <DataType type="IfcPressureMeasure"/>
- </DefinedValue>
- </TypePropertyTableValue>
- </PropertyType>
- </PropertyDef>
- <PropertyDef>
- <Name>RaisedCompressiveStrength</Name>
- <Definition/>
- <PropertyType>
- <TypePropertySingleValue>
- <DataType type="IfcPressureMeasure"/>
- </TypePropertySingleValue>
- </PropertyType>
- </PropertyDef>
- <PropertyDef>
- <Name>ReferenceDepth</Name>
- <Definition/>
- <PropertyType>
- <TypePropertySingleValue>
- <DataType type="IfcPositiveLengthMeasure"/>
- </TypePropertySingleValue>
- </PropertyType>
- </PropertyDef>
- </TypeComplexProperty>
- </PropertyType>
- </PropertyDef>
- <PropertyDef>
- <Name>OutOfPlane</Name>
- <Definition/>
- <PropertyType>
- <TypeComplexProperty name="CP_MaterialMechanicalPanel">
- <PropertyDef>
- <Name>YoungModulusBending</Name>
- <Definition/>
- <PropertyType>
- <TypePropertyTableValue>
- <Expression/>
- <DefiningValue>
- <DataType type="IfcPositivePlaneAngleMeasure"/>
- </DefiningValue>
- <DefinedValue>
- <DataType type="IfcModulusOfElasticityMeasure"/>
- </DefinedValue>
- </TypePropertyTableValue>
- </PropertyType>
- </PropertyDef>
- <PropertyDef>
- <Name>YoungModulusTension</Name>
- <Definition/>
- <PropertyType>
- <TypePropertyTableValue>
- <Expression/>
- <DefiningValue>
- <DataType type="IfcPositivePlaneAngleMeasure"/>
- </DefiningValue>
- <DefinedValue>
- <DataType type="IfcModulusOfElasticityMeasure"/>
- </DefinedValue>
- </TypePropertyTableValue>
- </PropertyType>
- </PropertyDef>
- <PropertyDef>
- <Name>YoungModulusCompression</Name>
- <Definition/>
- <PropertyType>
- <TypePropertySingleValue>
- <DataType type="IfcModulusOfElasticityMeasure"/>
- </TypePropertySingleValue>
- </PropertyType>
- </PropertyDef>
- <PropertyDef>
- <Name>ShearModulus</Name>
- <Definition/>
- <PropertyType>
- <TypePropertySingleValue>
- <DataType type="IfcModulusOfElasticityMeasure"/>
- </TypePropertySingleValue>
- </PropertyType>
- </PropertyDef>
- <PropertyDef>
- <Name>BendingStrength</Name>
- <Definition/>
- <PropertyType>
- <TypePropertyTableValue>
- <Expression/>
- <DefiningValue>
- <DataType type="IfcPositivePlaneAngleMeasure"/>
- </DefiningValue>
- <DefinedValue>
- <DataType type="IfcPressureMeasure"/>
- </DefinedValue>
- </TypePropertyTableValue>
- </PropertyType>
- </PropertyDef>
- <PropertyDef>
- <Name>CompressiveStrength</Name>
- <Definition/>
- <PropertyType>
- <TypePropertyTableValue>
- <Expression/>
- <DefiningValue>
- <DataType type="IfcPositivePlaneAngleMeasure"/>
- </DefiningValue>
- <DefinedValue>
- <DataType type="IfcPressureMeasure"/>
- </DefinedValue>
- </TypePropertyTableValue>
- </PropertyType>
- </PropertyDef>
- <PropertyDef>
- <Name>TensileStrength</Name>
- <Definition/>
- <PropertyType>
- <TypePropertyTableValue>
- <Expression/>
- <DefiningValue>
- <DataType type="IfcPositivePlaneAngleMeasure"/>
- </DefiningValue>
- <DefinedValue>
- <DataType type="IfcPressureMeasure"/>
- </DefinedValue>
- </TypePropertyTableValue>
- </PropertyType>
- </PropertyDef>
- <PropertyDef>
- <Name>ShearStrength</Name>
- <Definition/>
- <PropertyType>
- <TypePropertyTableValue>
- <Expression/>
- <DefiningValue>
- <DataType type="IfcPositivePlaneAngleMeasure"/>
- </DefiningValue>
- <DefinedValue>
- <DataType type="IfcPressureMeasure"/>
- </DefinedValue>
- </TypePropertyTableValue>
- </PropertyType>
- </PropertyDef>
- <PropertyDef>
- <Name>BearingStrength</Name>
- <Definition/>
- <PropertyType>
- <TypePropertyTableValue>
- <Expression/>
- <DefiningValue>
- <DataType type="IfcPositivePlaneAngleMeasure"/>
- </DefiningValue>
- <DefinedValue>
- <DataType type="IfcPressureMeasure"/>
- </DefinedValue>
- </TypePropertyTableValue>
- </PropertyType>
- </PropertyDef>
- <PropertyDef>
- <Name>RaisedCompressiveStrength</Name>
- <Definition/>
- <PropertyType>
- <TypePropertySingleValue>
- <DataType type="IfcPressureMeasure"/>
- </TypePropertySingleValue>
- </PropertyType>
- </PropertyDef>
- <PropertyDef>
- <Name>ReferenceDepth</Name>
- <Definition/>
- <PropertyType>
- <TypePropertySingleValue>
- <DataType type="IfcPositiveLengthMeasure"/>
- </TypePropertySingleValue>
- </PropertyType>
- </PropertyDef>
- </TypeComplexProperty>
- </PropertyType>
- </PropertyDef>
- <PropertyDef>
- <Name>OutOfPlaneNegative</Name>
- <Definition/>
- <PropertyType>
- <TypeComplexProperty name="CP_MaterialMechanicalPanel">
- <PropertyDef>
- <Name>YoungModulusBending</Name>
- <Definition/>
- <PropertyType>
- <TypePropertyTableValue>
- <Expression/>
- <DefiningValue>
- <DataType type="IfcPositivePlaneAngleMeasure"/>
- </DefiningValue>
- <DefinedValue>
- <DataType type="IfcModulusOfElasticityMeasure"/>
- </DefinedValue>
- </TypePropertyTableValue>
- </PropertyType>
- </PropertyDef>
- <PropertyDef>
- <Name>YoungModulusTension</Name>
- <Definition/>
- <PropertyType>
- <TypePropertyTableValue>
- <Expression/>
- <DefiningValue>
- <DataType type="IfcPositivePlaneAngleMeasure"/>
- </DefiningValue>
- <DefinedValue>
- <DataType type="IfcModulusOfElasticityMeasure"/>
- </DefinedValue>
- </TypePropertyTableValue>
- </PropertyType>
- </PropertyDef>
- <PropertyDef>
- <Name>YoungModulusCompression</Name>
- <Definition/>
- <PropertyType>
- <TypePropertySingleValue>
- <DataType type="IfcModulusOfElasticityMeasure"/>
- </TypePropertySingleValue>
- </PropertyType>
- </PropertyDef>
- <PropertyDef>
- <Name>ShearModulus</Name>
- <Definition/>
- <PropertyType>
- <TypePropertySingleValue>
- <DataType type="IfcModulusOfElasticityMeasure"/>
- </TypePropertySingleValue>
- </PropertyType>
- </PropertyDef>
- <PropertyDef>
- <Name>BendingStrength</Name>
- <Definition/>
- <PropertyType>
- <TypePropertyTableValue>
- <Expression/>
- <DefiningValue>
- <DataType type="IfcPositivePlaneAngleMeasure"/>
- </DefiningValue>
- <DefinedValue>
- <DataType type="IfcPressureMeasure"/>
- </DefinedValue>
- </TypePropertyTableValue>
- </PropertyType>
- </PropertyDef>
- <PropertyDef>
- <Name>CompressiveStrength</Name>
- <Definition/>
- <PropertyType>
- <TypePropertyTableValue>
- <Expression/>
- <DefiningValue>
- <DataType type="IfcPositivePlaneAngleMeasure"/>
- </DefiningValue>
- <DefinedValue>
- <DataType type="IfcPressureMeasure"/>
- </DefinedValue>
- </TypePropertyTableValue>
- </PropertyType>
- </PropertyDef>
- <PropertyDef>
- <Name>TensileStrength</Name>
- <Definition/>
- <PropertyType>
- <TypePropertyTableValue>
- <Expression/>
- <DefiningValue>
- <DataType type="IfcPositivePlaneAngleMeasure"/>
- </DefiningValue>
- <DefinedValue>
- <DataType type="IfcPressureMeasure"/>
- </DefinedValue>
- </TypePropertyTableValue>
- </PropertyType>
- </PropertyDef>
- <PropertyDef>
- <Name>ShearStrength</Name>
- <Definition/>
- <PropertyType>
- <TypePropertyTableValue>
- <Expression/>
- <DefiningValue>
- <DataType type="IfcPositivePlaneAngleMeasure"/>
- </DefiningValue>
- <DefinedValue>
- <DataType type="IfcPressureMeasure"/>
- </DefinedValue>
- </TypePropertyTableValue>
- </PropertyType>
- </PropertyDef>
- <PropertyDef>
- <Name>BearingStrength</Name>
- <Definition/>
- <PropertyType>
- <TypePropertyTableValue>
- <Expression/>
- <DefiningValue>
- <DataType type="IfcPositivePlaneAngleMeasure"/>
- </DefiningValue>
- <DefinedValue>
- <DataType type="IfcPressureMeasure"/>
- </DefinedValue>
- </TypePropertyTableValue>
- </PropertyType>
- </PropertyDef>
- <PropertyDef>
- <Name>RaisedCompressiveStrength</Name>
- <Definition/>
- <PropertyType>
- <TypePropertySingleValue>
- <DataType type="IfcPressureMeasure"/>
- </TypePropertySingleValue>
- </PropertyType>
- </PropertyDef>
- <PropertyDef>
- <Name>ReferenceDepth</Name>
- <Definition/>
- <PropertyType>
- <TypePropertySingleValue>
- <DataType type="IfcPositiveLengthMeasure"/>
- </TypePropertySingleValue>
- </PropertyType>
- </PropertyDef>
- </TypeComplexProperty>
- </PropertyType>
- </PropertyDef>
- </PropertyDefs>
-</PropertySetDef> |
diff -N -w -U10 tmp/a/psd/Pset_MaterialWoodBasedStructure.xml tmp/b/psd/Pset_MaterialWoodBasedStructure.xml
--- tmp/a/psd/Pset_MaterialWoodBasedStructure.xml 1970-01-01 01:00:00.000000000 +0100
+++ tmp/b/psd/Pset_MaterialWoodBasedStructure.xml 2022-03-22 21:19:42.603801800 +0100
@@ -0,0 +1,22 @@
+<?xml version="1.0" ?>
+<PropertySetDef xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" templatetype="PSET_TYPEDRIVENOVERRIDE" xsi:noNamespaceSchemaLocation="http://buildingSMART-tech.org/xml/psd/PSD_IFC4.xsd">
+ <IfcVersion version="IFC4X3_DEV"/>
+ <Name>Pset_MaterialWoodBasedStructure</Name>
+ <Definition/>
+ <Applicability/>
+ <ApplicableClasses>
+ <ClassName>IfcMaterial</ClassName>
+ </ApplicableClasses>
+ <ApplicableTypeValue>IfcMaterial</ApplicableTypeValue>
+ <PropertyDefs>
+ <PropertyDef>
+ <Name>ApplicableStructuralDesignMethod</Name>
+ <Definition>Determines whether mechanical material properties are applicable to 'ASD' = allowable stress design (working stress design), 'LSD' = limit state design, or 'LRFD' = load and resistance factor design.</Definition>
+ <PropertyType>
+ <TypePropertySingleValue>
+ <DataType type="IfcLabel"/>
+ </TypePropertySingleValue>
+ </PropertyType>
+ </PropertyDef>
+ </PropertyDefs>
+</PropertySetDef>
diff -N -w -U10 tmp/a/psd/Pset_MechanicalBeamInPlane.xml tmp/b/psd/Pset_MechanicalBeamInPlane.xml
--- tmp/a/psd/Pset_MechanicalBeamInPlane.xml 1970-01-01 01:00:00.000000000 +0100
+++ tmp/b/psd/Pset_MechanicalBeamInPlane.xml 2022-03-22 21:19:42.631719400 +0100
@@ -0,0 +1,163 @@
+<?xml version="1.0" ?>
+<PropertySetDef xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" templatetype="PSET_TYPEDRIVENOVERRIDE" xsi:noNamespaceSchemaLocation="http://buildingSMART-tech.org/xml/psd/PSD_IFC4.xsd">
+ <IfcVersion version="IFC4X3_DEV"/>
+ <Name>Pset_MechanicalBeamInPlane</Name>
+ <Definition/>
+ <Applicability/>
+ <ApplicableClasses>
+ <ClassName>IfcMaterial</ClassName>
+ </ApplicableClasses>
+ <ApplicableTypeValue>IfcMaterial</ApplicableTypeValue>
+ <PropertyDefs>
+ <PropertyDef>
+ <Name>YoungModulus</Name>
+ <Definition>A measure of the Young's modulus of elasticity of the material.</Definition>
+ <PropertyType>
+ <TypePropertySingleValue>
+ <DataType type="IfcModulusOfElasticityMeasure"/>
+ </TypePropertySingleValue>
+ </PropertyType>
+ </PropertyDef>
+ <PropertyDef>
+ <Name>YoungModulusMin</Name>
+ <Definition>Elastic modulus, minimal value, α=0°.</Definition>
+ <PropertyType>
+ <TypePropertySingleValue>
+ <DataType type="IfcModulusOfElasticityMeasure"/>
+ </TypePropertySingleValue>
+ </PropertyType>
+ </PropertyDef>
+ <PropertyDef>
+ <Name>YoungModulusPerp</Name>
+ <Definition>Elastic modulus, mean value, α=90°.</Definition>
+ <PropertyType>
+ <TypePropertySingleValue>
+ <DataType type="IfcModulusOfElasticityMeasure"/>
+ </TypePropertySingleValue>
+ </PropertyType>
+ </PropertyDef>
+ <PropertyDef>
+ <Name>YoungModulusPerpMin</Name>
+ <Definition>Elastic modulus, minimal value, α=90°.</Definition>
+ <PropertyType>
+ <TypePropertySingleValue>
+ <DataType type="IfcModulusOfElasticityMeasure"/>
+ </TypePropertySingleValue>
+ </PropertyType>
+ </PropertyDef>
+ <PropertyDef>
+ <Name>ShearModulus</Name>
+ <Definition>A measure of the shear modulus of elasticity of the material.</Definition>
+ <PropertyType>
+ <TypePropertySingleValue>
+ <DataType type="IfcModulusOfElasticityMeasure"/>
+ </TypePropertySingleValue>
+ </PropertyType>
+ </PropertyDef>
+ <PropertyDef>
+ <Name>ShearModulusMin</Name>
+ <Definition>Shear modulus, minimal value.</Definition>
+ <PropertyType>
+ <TypePropertySingleValue>
+ <DataType type="IfcModulusOfElasticityMeasure"/>
+ </TypePropertySingleValue>
+ </PropertyType>
+ </PropertyDef>
+ <PropertyDef>
+ <Name>BendingStrength</Name>
+ <Definition>Defining values: α; defined values: bending strength.</Definition>
+ <PropertyType>
+ <TypePropertySingleValue>
+ <DataType type="IfcPressureMeasure"/>
+ </TypePropertySingleValue>
+ </PropertyType>
+ </PropertyDef>
+ <PropertyDef>
+ <Name>TensileStrength</Name>
+ <Definition>Defining values: α; defined values: tensile strength.</Definition>
+ <PropertyType>
+ <TypePropertySingleValue>
+ <DataType type="IfcPressureMeasure"/>
+ </TypePropertySingleValue>
+ </PropertyType>
+ </PropertyDef>
+ <PropertyDef>
+ <Name>TensileStrengthPerp</Name>
+ <Definition>Tensile strength, α=90°.</Definition>
+ <PropertyType>
+ <TypePropertySingleValue>
+ <DataType type="IfcPressureMeasure"/>
+ </TypePropertySingleValue>
+ </PropertyType>
+ </PropertyDef>
+ <PropertyDef>
+ <Name>CompStrength</Name>
+ <Definition>Compressive strength, α=0°.</Definition>
+ <PropertyType>
+ <TypePropertySingleValue>
+ <DataType type="IfcPressureMeasure"/>
+ </TypePropertySingleValue>
+ </PropertyType>
+ </PropertyDef>
+ <PropertyDef>
+ <Name>CompStrengthPerp</Name>
+ <Definition>Compressive strength, α=90°.</Definition>
+ <PropertyType>
+ <TypePropertySingleValue>
+ <DataType type="IfcPressureMeasure"/>
+ </TypePropertySingleValue>
+ </PropertyType>
+ </PropertyDef>
+ <PropertyDef>
+ <Name>RaisedCompStrengthPerp</Name>
+ <Definition>Alternative value for compressive strength, α=90°, which may be used under material and code dependent conditions (e.g. if deformation is tolerable, or far from ends of the member); conditions should be stated in SELF\IfcProperty.Description.</Definition>
+ <PropertyType>
+ <TypePropertySingleValue>
+ <DataType type="IfcPressureMeasure"/>
+ </TypePropertySingleValue>
+ </PropertyType>
+ </PropertyDef>
+ <PropertyDef>
+ <Name>ShearStrength</Name>
+ <Definition>Defining values: α; defined values: shear strength.</Definition>
+ <PropertyType>
+ <TypePropertySingleValue>
+ <DataType type="IfcPressureMeasure"/>
+ </TypePropertySingleValue>
+ </PropertyType>
+ </PropertyDef>
+ <PropertyDef>
+ <Name>TorsionalStrength</Name>
+ <Definition>Shear strength in torsion.</Definition>
+ <PropertyType>
+ <TypePropertySingleValue>
+ <DataType type="IfcPressureMeasure"/>
+ </TypePropertySingleValue>
+ </PropertyType>
+ </PropertyDef>
+ <PropertyDef>
+ <Name>ReferenceDepth</Name>
+ <Definition>Depth in bending for which the mechanical properties are valid; provided as a means to check the integrity of material assignment.</Definition>
+ <PropertyType>
+ <TypePropertySingleValue>
+ <DataType type="IfcPositiveLengthMeasure"/>
+ </TypePropertySingleValue>
+ </PropertyType>
+ </PropertyDef>
+ <PropertyDef>
+ <Name>InstabilityFactors</Name>
+ <Definition>Defining values: slenderness ratios; defined values: either factors or divisors of the strength, depending on the design method (if <1: factors, if >1: divisors).</Definition>
+ <PropertyType>
+ <TypePropertyTableValue>
+ <Expression/>
+ <DefiningValue>
+ <DataType type="IfcPositiveRatioMeasure"/>
+ </DefiningValue>
+ <DefinedValue>
+ <DataType type="IfcPositiveRatioMeasure"/>
+ </DefinedValue>
+ </TypePropertyTableValue>
+ </PropertyType>
+ </PropertyDef>
+ </PropertyDefs>
+</PropertySetDef>
diff -N -w -U10 tmp/a/psd/Pset_MechanicalBeamInPlaneNegative.xml tmp/b/psd/Pset_MechanicalBeamInPlaneNegative.xml
--- tmp/a/psd/Pset_MechanicalBeamInPlaneNegative.xml 1970-01-01 01:00:00.000000000 +0100
+++ tmp/b/psd/Pset_MechanicalBeamInPlaneNegative.xml 2022-03-22 21:19:42.660868700 +0100
@@ -0,0 +1,163 @@
+<?xml version="1.0" ?>
+<PropertySetDef xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" templatetype="PSET_TYPEDRIVENOVERRIDE" xsi:noNamespaceSchemaLocation="http://buildingSMART-tech.org/xml/psd/PSD_IFC4.xsd">
+ <IfcVersion version="IFC4X3_DEV"/>
+ <Name>Pset_MechanicalBeamInPlaneNegative</Name>
+ <Definition/>
+ <Applicability/>
+ <ApplicableClasses>
+ <ClassName>IfcMaterial</ClassName>
+ </ApplicableClasses>
+ <ApplicableTypeValue>IfcMaterial</ApplicableTypeValue>
+ <PropertyDefs>
+ <PropertyDef>
+ <Name>YoungModulus</Name>
+ <Definition>A measure of the Young's modulus of elasticity of the material.</Definition>
+ <PropertyType>
+ <TypePropertySingleValue>
+ <DataType type="IfcModulusOfElasticityMeasure"/>
+ </TypePropertySingleValue>
+ </PropertyType>
+ </PropertyDef>
+ <PropertyDef>
+ <Name>YoungModulusMin</Name>
+ <Definition>Elastic modulus, minimal value, α=0°.</Definition>
+ <PropertyType>
+ <TypePropertySingleValue>
+ <DataType type="IfcModulusOfElasticityMeasure"/>
+ </TypePropertySingleValue>
+ </PropertyType>
+ </PropertyDef>
+ <PropertyDef>
+ <Name>YoungModulusPerp</Name>
+ <Definition>Elastic modulus, mean value, α=90°.</Definition>
+ <PropertyType>
+ <TypePropertySingleValue>
+ <DataType type="IfcModulusOfElasticityMeasure"/>
+ </TypePropertySingleValue>
+ </PropertyType>
+ </PropertyDef>
+ <PropertyDef>
+ <Name>YoungModulusPerpMin</Name>
+ <Definition>Elastic modulus, minimal value, α=90°.</Definition>
+ <PropertyType>
+ <TypePropertySingleValue>
+ <DataType type="IfcModulusOfElasticityMeasure"/>
+ </TypePropertySingleValue>
+ </PropertyType>
+ </PropertyDef>
+ <PropertyDef>
+ <Name>ShearModulus</Name>
+ <Definition>A measure of the shear modulus of elasticity of the material.</Definition>
+ <PropertyType>
+ <TypePropertySingleValue>
+ <DataType type="IfcModulusOfElasticityMeasure"/>
+ </TypePropertySingleValue>
+ </PropertyType>
+ </PropertyDef>
+ <PropertyDef>
+ <Name>ShearModulusMin</Name>
+ <Definition>Shear modulus, minimal value.</Definition>
+ <PropertyType>
+ <TypePropertySingleValue>
+ <DataType type="IfcModulusOfElasticityMeasure"/>
+ </TypePropertySingleValue>
+ </PropertyType>
+ </PropertyDef>
+ <PropertyDef>
+ <Name>BendingStrength</Name>
+ <Definition>Defining values: α; defined values: bending strength.</Definition>
+ <PropertyType>
+ <TypePropertySingleValue>
+ <DataType type="IfcPressureMeasure"/>
+ </TypePropertySingleValue>
+ </PropertyType>
+ </PropertyDef>
+ <PropertyDef>
+ <Name>TensileStrength</Name>
+ <Definition>Defining values: α; defined values: tensile strength.</Definition>
+ <PropertyType>
+ <TypePropertySingleValue>
+ <DataType type="IfcPressureMeasure"/>
+ </TypePropertySingleValue>
+ </PropertyType>
+ </PropertyDef>
+ <PropertyDef>
+ <Name>TensileStrengthPerp</Name>
+ <Definition>Tensile strength, α=90°.</Definition>
+ <PropertyType>
+ <TypePropertySingleValue>
+ <DataType type="IfcPressureMeasure"/>
+ </TypePropertySingleValue>
+ </PropertyType>
+ </PropertyDef>
+ <PropertyDef>
+ <Name>CompStrength</Name>
+ <Definition>Compressive strength, α=0°.</Definition>
+ <PropertyType>
+ <TypePropertySingleValue>
+ <DataType type="IfcPressureMeasure"/>
+ </TypePropertySingleValue>
+ </PropertyType>
+ </PropertyDef>
+ <PropertyDef>
+ <Name>CompStrengthPerp</Name>
+ <Definition>Compressive strength, α=90°.</Definition>
+ <PropertyType>
+ <TypePropertySingleValue>
+ <DataType type="IfcPressureMeasure"/>
+ </TypePropertySingleValue>
+ </PropertyType>
+ </PropertyDef>
+ <PropertyDef>
+ <Name>RaisedCompStrengthPerp</Name>
+ <Definition>Alternative value for compressive strength, α=90°, which may be used under material and code dependent conditions (e.g. if deformation is tolerable, or far from ends of the member); conditions should be stated in SELF\IfcProperty.Description.</Definition>
+ <PropertyType>
+ <TypePropertySingleValue>
+ <DataType type="IfcPressureMeasure"/>
+ </TypePropertySingleValue>
+ </PropertyType>
+ </PropertyDef>
+ <PropertyDef>
+ <Name>ShearStrength</Name>
+ <Definition>Defining values: α; defined values: shear strength.</Definition>
+ <PropertyType>
+ <TypePropertySingleValue>
+ <DataType type="IfcPressureMeasure"/>
+ </TypePropertySingleValue>
+ </PropertyType>
+ </PropertyDef>
+ <PropertyDef>
+ <Name>TorsionalStrength</Name>
+ <Definition>Shear strength in torsion.</Definition>
+ <PropertyType>
+ <TypePropertySingleValue>
+ <DataType type="IfcPressureMeasure"/>
+ </TypePropertySingleValue>
+ </PropertyType>
+ </PropertyDef>
+ <PropertyDef>
+ <Name>ReferenceDepth</Name>
+ <Definition>Depth in bending for which the mechanical properties are valid; provided as a means to check the integrity of material assignment.</Definition>
+ <PropertyType>
+ <TypePropertySingleValue>
+ <DataType type="IfcPositiveLengthMeasure"/>
+ </TypePropertySingleValue>
+ </PropertyType>
+ </PropertyDef>
+ <PropertyDef>
+ <Name>InstabilityFactors</Name>
+ <Definition>Defining values: slenderness ratios; defined values: either factors or divisors of the strength, depending on the design method (if <1: factors, if >1: divisors).</Definition>
+ <PropertyType>
+ <TypePropertyTableValue>
+ <Expression/>
+ <DefiningValue>
+ <DataType type="IfcPositiveRatioMeasure"/>
+ </DefiningValue>
+ <DefinedValue>
+ <DataType type="IfcPositiveRatioMeasure"/>
+ </DefinedValue>
+ </TypePropertyTableValue>
+ </PropertyType>
+ </PropertyDef>
+ </PropertyDefs>
+</PropertySetDef> |
diff -N -w -U10 tmp/a/psd/Pset_MechanicalBeamOutOfPlane.xml tmp/b/psd/Pset_MechanicalBeamOutOfPlane.xml
--- tmp/a/psd/Pset_MechanicalBeamOutOfPlane.xml 1970-01-01 01:00:00.000000000 +0100
+++ tmp/b/psd/Pset_MechanicalBeamOutOfPlane.xml 2022-03-22 21:19:42.681740600 +0100
@@ -0,0 +1,163 @@
+<?xml version="1.0" ?>
+<PropertySetDef xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" templatetype="PSET_TYPEDRIVENOVERRIDE" xsi:noNamespaceSchemaLocation="http://buildingSMART-tech.org/xml/psd/PSD_IFC4.xsd">
+ <IfcVersion version="IFC4X3_DEV"/>
+ <Name>Pset_MechanicalBeamOutOfPlane</Name>
+ <Definition/>
+ <Applicability/>
+ <ApplicableClasses>
+ <ClassName>IfcMaterial</ClassName>
+ </ApplicableClasses>
+ <ApplicableTypeValue>IfcMaterial</ApplicableTypeValue>
+ <PropertyDefs>
+ <PropertyDef>
+ <Name>YoungModulus</Name>
+ <Definition>A measure of the Young's modulus of elasticity of the material.</Definition>
+ <PropertyType>
+ <TypePropertySingleValue>
+ <DataType type="IfcModulusOfElasticityMeasure"/>
+ </TypePropertySingleValue>
+ </PropertyType>
+ </PropertyDef>
+ <PropertyDef>
+ <Name>YoungModulusMin</Name>
+ <Definition>Elastic modulus, minimal value, α=0°.</Definition>
+ <PropertyType>
+ <TypePropertySingleValue>
+ <DataType type="IfcModulusOfElasticityMeasure"/>
+ </TypePropertySingleValue>
+ </PropertyType>
+ </PropertyDef>
+ <PropertyDef>
+ <Name>YoungModulusPerp</Name>
+ <Definition>Elastic modulus, mean value, α=90°.</Definition>
+ <PropertyType>
+ <TypePropertySingleValue>
+ <DataType type="IfcModulusOfElasticityMeasure"/>
+ </TypePropertySingleValue>
+ </PropertyType>
+ </PropertyDef>
+ <PropertyDef>
+ <Name>YoungModulusPerpMin</Name>
+ <Definition>Elastic modulus, minimal value, α=90°.</Definition>
+ <PropertyType>
+ <TypePropertySingleValue>
+ <DataType type="IfcModulusOfElasticityMeasure"/>
+ </TypePropertySingleValue>
+ </PropertyType>
+ </PropertyDef>
+ <PropertyDef>
+ <Name>ShearModulus</Name>
+ <Definition>A measure of the shear modulus of elasticity of the material.</Definition>
+ <PropertyType>
+ <TypePropertySingleValue>
+ <DataType type="IfcModulusOfElasticityMeasure"/>
+ </TypePropertySingleValue>
+ </PropertyType>
+ </PropertyDef>
+ <PropertyDef>
+ <Name>ShearModulusMin</Name>
+ <Definition>Shear modulus, minimal value.</Definition>
+ <PropertyType>
+ <TypePropertySingleValue>
+ <DataType type="IfcModulusOfElasticityMeasure"/>
+ </TypePropertySingleValue>
+ </PropertyType>
+ </PropertyDef>
+ <PropertyDef>
+ <Name>BendingStrength</Name>
+ <Definition>Defining values: α; defined values: bending strength.</Definition>
+ <PropertyType>
+ <TypePropertySingleValue>
+ <DataType type="IfcPressureMeasure"/>
+ </TypePropertySingleValue>
+ </PropertyType>
+ </PropertyDef>
+ <PropertyDef>
+ <Name>TensileStrength</Name>
+ <Definition>Defining values: α; defined values: tensile strength.</Definition>
+ <PropertyType>
+ <TypePropertySingleValue>
+ <DataType type="IfcPressureMeasure"/>
+ </TypePropertySingleValue>
+ </PropertyType>
+ </PropertyDef>
+ <PropertyDef>
+ <Name>TensileStrengthPerp</Name>
+ <Definition>Tensile strength, α=90°.</Definition>
+ <PropertyType>
+ <TypePropertySingleValue>
+ <DataType type="IfcPressureMeasure"/>
+ </TypePropertySingleValue>
+ </PropertyType>
+ </PropertyDef>
+ <PropertyDef>
+ <Name>CompStrength</Name>
+ <Definition>Compressive strength, α=0°.</Definition>
+ <PropertyType>
+ <TypePropertySingleValue>
+ <DataType type="IfcPressureMeasure"/>
+ </TypePropertySingleValue>
+ </PropertyType>
+ </PropertyDef>
+ <PropertyDef>
+ <Name>CompStrengthPerp</Name>
+ <Definition>Compressive strength, α=90°.</Definition>
+ <PropertyType>
+ <TypePropertySingleValue>
+ <DataType type="IfcPressureMeasure"/>
+ </TypePropertySingleValue>
+ </PropertyType>
+ </PropertyDef>
+ <PropertyDef>
+ <Name>RaisedCompStrengthPerp</Name>
+ <Definition>Alternative value for compressive strength, α=90°, which may be used under material and code dependent conditions (e.g. if deformation is tolerable, or far from ends of the member); conditions should be stated in SELF\IfcProperty.Description.</Definition>
+ <PropertyType>
+ <TypePropertySingleValue>
+ <DataType type="IfcPressureMeasure"/>
+ </TypePropertySingleValue>
+ </PropertyType>
+ </PropertyDef>
+ <PropertyDef>
+ <Name>ShearStrength</Name>
+ <Definition>Defining values: α; defined values: shear strength.</Definition>
+ <PropertyType>
+ <TypePropertySingleValue>
+ <DataType type="IfcPressureMeasure"/>
+ </TypePropertySingleValue>
+ </PropertyType>
+ </PropertyDef>
+ <PropertyDef>
+ <Name>TorsionalStrength</Name>
+ <Definition>Shear strength in torsion.</Definition>
+ <PropertyType>
+ <TypePropertySingleValue>
+ <DataType type="IfcPressureMeasure"/>
+ </TypePropertySingleValue>
+ </PropertyType>
+ </PropertyDef>
+ <PropertyDef>
+ <Name>ReferenceDepth</Name>
+ <Definition>Depth in bending for which the mechanical properties are valid; provided as a means to check the integrity of material assignment.</Definition>
+ <PropertyType>
+ <TypePropertySingleValue>
+ <DataType type="IfcPositiveLengthMeasure"/>
+ </TypePropertySingleValue>
+ </PropertyType>
+ </PropertyDef>
+ <PropertyDef>
+ <Name>InstabilityFactors</Name>
+ <Definition>Defining values: slenderness ratios; defined values: either factors or divisors of the strength, depending on the design method (if <1: factors, if >1: divisors).</Definition>
+ <PropertyType>
+ <TypePropertyTableValue>
+ <Expression/>
+ <DefiningValue>
+ <DataType type="IfcPositiveRatioMeasure"/>
+ </DefiningValue>
+ <DefinedValue>
+ <DataType type="IfcPositiveRatioMeasure"/>
+ </DefinedValue>
+ </TypePropertyTableValue>
+ </PropertyType>
+ </PropertyDef>
+ </PropertyDefs>
+</PropertySetDef>
diff -N -w -U10 tmp/a/psd/Pset_MechanicalPanelInPlane.xml tmp/b/psd/Pset_MechanicalPanelInPlane.xml
--- tmp/a/psd/Pset_MechanicalPanelInPlane.xml 1970-01-01 01:00:00.000000000 +0100
+++ tmp/b/psd/Pset_MechanicalPanelInPlane.xml 2022-03-22 21:19:42.700619600 +0100
@@ -0,0 +1,154 @@
+<?xml version="1.0" ?>
+<PropertySetDef xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" templatetype="PSET_TYPEDRIVENOVERRIDE" xsi:noNamespaceSchemaLocation="http://buildingSMART-tech.org/xml/psd/PSD_IFC4.xsd">
+ <IfcVersion version="IFC4X3_DEV"/>
+ <Name>Pset_MechanicalPanelInPlane</Name>
+ <Definition/>
+ <Applicability/>
+ <ApplicableClasses>
+ <ClassName>IfcMaterial</ClassName>
+ </ApplicableClasses>
+ <ApplicableTypeValue>IfcMaterial</ApplicableTypeValue>
+ <PropertyDefs>
+ <PropertyDef>
+ <Name>YoungModulusBending</Name>
+ <Definition>Defining values: α; defined values: elastic modulus in bending.</Definition>
+ <PropertyType>
+ <TypePropertyTableValue>
+ <Expression/>
+ <DefiningValue>
+ <DataType type="IfcPositivePlaneAngleMeasure"/>
+ </DefiningValue>
+ <DefinedValue>
+ <DataType type="IfcModulusOfElasticityMeasure"/>
+ </DefinedValue>
+ </TypePropertyTableValue>
+ </PropertyType>
+ </PropertyDef>
+ <PropertyDef>
+ <Name>YoungModulusTension</Name>
+ <Definition>Defining values: α; defined values: elastic modulus in tension.</Definition>
+ <PropertyType>
+ <TypePropertyTableValue>
+ <Expression/>
+ <DefiningValue>
+ <DataType type="IfcPositivePlaneAngleMeasure"/>
+ </DefiningValue>
+ <DefinedValue>
+ <DataType type="IfcModulusOfElasticityMeasure"/>
+ </DefinedValue>
+ </TypePropertyTableValue>
+ </PropertyType>
+ </PropertyDef>
+ <PropertyDef>
+ <Name>YoungModulusCompression</Name>
+ <Definition>Elastic modulus in compression.</Definition>
+ <PropertyType>
+ <TypePropertySingleValue>
+ <DataType type="IfcModulusOfElasticityMeasure"/>
+ </TypePropertySingleValue>
+ </PropertyType>
+ </PropertyDef>
+ <PropertyDef>
+ <Name>ShearModulus</Name>
+ <Definition>A measure of the shear modulus of elasticity of the material.</Definition>
+ <PropertyType>
+ <TypePropertySingleValue>
+ <DataType type="IfcModulusOfElasticityMeasure"/>
+ </TypePropertySingleValue>
+ </PropertyType>
+ </PropertyDef>
+ <PropertyDef>
+ <Name>BendingStrength</Name>
+ <Definition>Defining values: α; defined values: bending strength.</Definition>
+ <PropertyType>
+ <TypePropertyTableValue>
+ <Expression/>
+ <DefiningValue>
+ <DataType type="IfcPositivePlaneAngleMeasure"/>
+ </DefiningValue>
+ <DefinedValue>
+ <DataType type="IfcPressureMeasure"/>
+ </DefinedValue>
+ </TypePropertyTableValue>
+ </PropertyType>
+ </PropertyDef>
+ <PropertyDef>
+ <Name>CompressiveStrength</Name>
+ <Definition>Defining values: α; defined values: compressive strength.</Definition>
+ <PropertyType>
+ <TypePropertyTableValue>
+ <Expression/>
+ <DefiningValue>
+ <DataType type="IfcPositivePlaneAngleMeasure"/>
+ </DefiningValue>
+ <DefinedValue>
+ <DataType type="IfcPressureMeasure"/>
+ </DefinedValue>
+ </TypePropertyTableValue>
+ </PropertyType>
+ </PropertyDef>
+ <PropertyDef>
+ <Name>TensileStrength</Name>
+ <Definition>Defining values: α; defined values: tensile strength.</Definition>
+ <PropertyType>
+ <TypePropertyTableValue>
+ <Expression/>
+ <DefiningValue>
+ <DataType type="IfcPositivePlaneAngleMeasure"/>
+ </DefiningValue>
+ <DefinedValue>
+ <DataType type="IfcPressureMeasure"/>
+ </DefinedValue>
+ </TypePropertyTableValue>
+ </PropertyType>
+ </PropertyDef>
+ <PropertyDef>
+ <Name>ShearStrength</Name>
+ <Definition>Defining values: α; defined values: shear strength.</Definition>
+ <PropertyType>
+ <TypePropertyTableValue>
+ <Expression/>
+ <DefiningValue>
+ <DataType type="IfcPositivePlaneAngleMeasure"/>
+ </DefiningValue>
+ <DefinedValue>
+ <DataType type="IfcPressureMeasure"/>
+ </DefinedValue>
+ </TypePropertyTableValue>
+ </PropertyType>
+ </PropertyDef>
+ <PropertyDef>
+ <Name>BearingStrength</Name>
+ <Definition>Defining values: α; defined values: bearing strength of bolt holes, i.e. intrados pressure.</Definition>
+ <PropertyType>
+ <TypePropertyTableValue>
+ <Expression/>
+ <DefiningValue>
+ <DataType type="IfcPositivePlaneAngleMeasure"/>
+ </DefiningValue>
+ <DefinedValue>
+ <DataType type="IfcPressureMeasure"/>
+ </DefinedValue>
+ </TypePropertyTableValue>
+ </PropertyType>
+ </PropertyDef>
+ <PropertyDef>
+ <Name>RaisedCompressiveStrength</Name>
+ <Definition>Alternative value for compressive strength which may be used under material and code dependent conditions (e.g. if deformation is tolerable, or far from ends of the member); conditions should be stated in SELF\IfcProperty.Description.</Definition>
+ <PropertyType>
+ <TypePropertySingleValue>
+ <DataType type="IfcPressureMeasure"/>
+ </TypePropertySingleValue>
+ </PropertyType>
+ </PropertyDef>
+ <PropertyDef>
+ <Name>ReferenceDepth</Name>
+ <Definition>Depth in bending for which the mechanical properties are valid; provided as a means to check the integrity of material assignment.</Definition>
+ <PropertyType>
+ <TypePropertySingleValue>
+ <DataType type="IfcPositiveLengthMeasure"/>
+ </TypePropertySingleValue>
+ </PropertyType>
+ </PropertyDef>
+ </PropertyDefs>
+</PropertySetDef> |
diff -N -w -U10 tmp/a/psd/Pset_MechanicalPanelOutOfPlane.xml tmp/b/psd/Pset_MechanicalPanelOutOfPlane.xml
--- tmp/a/psd/Pset_MechanicalPanelOutOfPlane.xml 1970-01-01 01:00:00.000000000 +0100
+++ tmp/b/psd/Pset_MechanicalPanelOutOfPlane.xml 2022-03-22 21:19:42.722393500 +0100
@@ -0,0 +1,154 @@
+<?xml version="1.0" ?>
+<PropertySetDef xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" templatetype="PSET_TYPEDRIVENOVERRIDE" xsi:noNamespaceSchemaLocation="http://buildingSMART-tech.org/xml/psd/PSD_IFC4.xsd">
+ <IfcVersion version="IFC4X3_DEV"/>
+ <Name>Pset_MechanicalPanelOutOfPlane</Name>
+ <Definition/>
+ <Applicability/>
+ <ApplicableClasses>
+ <ClassName>IfcMaterial</ClassName>
+ </ApplicableClasses>
+ <ApplicableTypeValue>IfcMaterial</ApplicableTypeValue>
+ <PropertyDefs>
+ <PropertyDef>
+ <Name>YoungModulusBending</Name>
+ <Definition>Defining values: α; defined values: elastic modulus in bending.</Definition>
+ <PropertyType>
+ <TypePropertyTableValue>
+ <Expression/>
+ <DefiningValue>
+ <DataType type="IfcPositivePlaneAngleMeasure"/>
+ </DefiningValue>
+ <DefinedValue>
+ <DataType type="IfcModulusOfElasticityMeasure"/>
+ </DefinedValue>
+ </TypePropertyTableValue>
+ </PropertyType>
+ </PropertyDef>
+ <PropertyDef>
+ <Name>YoungModulusTension</Name>
+ <Definition>Defining values: α; defined values: elastic modulus in tension.</Definition>
+ <PropertyType>
+ <TypePropertyTableValue>
+ <Expression/>
+ <DefiningValue>
+ <DataType type="IfcPositivePlaneAngleMeasure"/>
+ </DefiningValue>
+ <DefinedValue>
+ <DataType type="IfcModulusOfElasticityMeasure"/>
+ </DefinedValue>
+ </TypePropertyTableValue>
+ </PropertyType>
+ </PropertyDef>
+ <PropertyDef>
+ <Name>YoungModulusCompression</Name>
+ <Definition>Elastic modulus in compression.</Definition>
+ <PropertyType>
+ <TypePropertySingleValue>
+ <DataType type="IfcModulusOfElasticityMeasure"/>
+ </TypePropertySingleValue>
+ </PropertyType>
+ </PropertyDef>
+ <PropertyDef>
+ <Name>ShearModulus</Name>
+ <Definition>A measure of the shear modulus of elasticity of the material.</Definition>
+ <PropertyType>
+ <TypePropertySingleValue>
+ <DataType type="IfcModulusOfElasticityMeasure"/>
+ </TypePropertySingleValue>
+ </PropertyType>
+ </PropertyDef>
+ <PropertyDef>
+ <Name>BendingStrength</Name>
+ <Definition>Defining values: α; defined values: bending strength.</Definition>
+ <PropertyType>
+ <TypePropertyTableValue>
+ <Expression/>
+ <DefiningValue>
+ <DataType type="IfcPositivePlaneAngleMeasure"/>
+ </DefiningValue>
+ <DefinedValue>
+ <DataType type="IfcPressureMeasure"/>
+ </DefinedValue>
+ </TypePropertyTableValue>
+ </PropertyType>
+ </PropertyDef>
+ <PropertyDef>
+ <Name>CompressiveStrength</Name>
+ <Definition>Defining values: α; defined values: compressive strength.</Definition>
+ <PropertyType>
+ <TypePropertyTableValue>
+ <Expression/>
+ <DefiningValue>
+ <DataType type="IfcPositivePlaneAngleMeasure"/>
+ </DefiningValue>
+ <DefinedValue>
+ <DataType type="IfcPressureMeasure"/>
+ </DefinedValue>
+ </TypePropertyTableValue>
+ </PropertyType>
+ </PropertyDef>
+ <PropertyDef>
+ <Name>TensileStrength</Name>
+ <Definition>Defining values: α; defined values: tensile strength.</Definition>
+ <PropertyType>
+ <TypePropertyTableValue>
+ <Expression/>
+ <DefiningValue>
+ <DataType type="IfcPositivePlaneAngleMeasure"/>
+ </DefiningValue>
+ <DefinedValue>
+ <DataType type="IfcPressureMeasure"/>
+ </DefinedValue>
+ </TypePropertyTableValue>
+ </PropertyType>
+ </PropertyDef>
+ <PropertyDef>
+ <Name>ShearStrength</Name>
+ <Definition>Defining values: α; defined values: shear strength.</Definition>
+ <PropertyType>
+ <TypePropertyTableValue>
+ <Expression/>
+ <DefiningValue>
+ <DataType type="IfcPositivePlaneAngleMeasure"/>
+ </DefiningValue>
+ <DefinedValue>
+ <DataType type="IfcPressureMeasure"/>
+ </DefinedValue>
+ </TypePropertyTableValue>
+ </PropertyType>
+ </PropertyDef>
+ <PropertyDef>
+ <Name>BearingStrength</Name>
+ <Definition>Defining values: α; defined values: bearing strength of bolt holes, i.e. intrados pressure.</Definition>
+ <PropertyType>
+ <TypePropertyTableValue>
+ <Expression/>
+ <DefiningValue>
+ <DataType type="IfcPositivePlaneAngleMeasure"/>
+ </DefiningValue>
+ <DefinedValue>
+ <DataType type="IfcPressureMeasure"/>
+ </DefinedValue>
+ </TypePropertyTableValue>
+ </PropertyType>
+ </PropertyDef>
+ <PropertyDef>
+ <Name>RaisedCompressiveStrength</Name>
+ <Definition>Alternative value for compressive strength which may be used under material and code dependent conditions (e.g. if deformation is tolerable, or far from ends of the member); conditions should be stated in SELF\IfcProperty.Description.</Definition>
+ <PropertyType>
+ <TypePropertySingleValue>
+ <DataType type="IfcPressureMeasure"/>
+ </TypePropertySingleValue>
+ </PropertyType>
+ </PropertyDef>
+ <PropertyDef>
+ <Name>ReferenceDepth</Name>
+ <Definition>Depth in bending for which the mechanical properties are valid; provided as a means to check the integrity of material assignment.</Definition>
+ <PropertyType>
+ <TypePropertySingleValue>
+ <DataType type="IfcPositiveLengthMeasure"/>
+ </TypePropertySingleValue>
+ </PropertyType>
+ </PropertyDef>
+ </PropertyDefs>
+</PropertySetDef>
diff -N -w -U10 tmp/a/psd/Pset_MechanicalPanelOutOfPlaneNegative.xml tmp/b/psd/Pset_MechanicalPanelOutOfPlaneNegative.xml
--- tmp/a/psd/Pset_MechanicalPanelOutOfPlaneNegative.xml 1970-01-01 01:00:00.000000000 +0100
+++ tmp/b/psd/Pset_MechanicalPanelOutOfPlaneNegative.xml 2022-03-22 21:19:42.742339900 +0100
@@ -0,0 +1,154 @@
+<?xml version="1.0" ?>
+<PropertySetDef xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" templatetype="PSET_TYPEDRIVENOVERRIDE" xsi:noNamespaceSchemaLocation="http://buildingSMART-tech.org/xml/psd/PSD_IFC4.xsd">
+ <IfcVersion version="IFC4X3_DEV"/>
+ <Name>Pset_MechanicalPanelOutOfPlaneNegative</Name>
+ <Definition/>
+ <Applicability/>
+ <ApplicableClasses>
+ <ClassName>IfcMaterial</ClassName>
+ </ApplicableClasses>
+ <ApplicableTypeValue>IfcMaterial</ApplicableTypeValue>
+ <PropertyDefs>
+ <PropertyDef>
+ <Name>YoungModulusBending</Name>
+ <Definition>Defining values: α; defined values: elastic modulus in bending.</Definition>
+ <PropertyType>
+ <TypePropertyTableValue>
+ <Expression/>
+ <DefiningValue>
+ <DataType type="IfcPositivePlaneAngleMeasure"/>
+ </DefiningValue>
+ <DefinedValue>
+ <DataType type="IfcModulusOfElasticityMeasure"/>
+ </DefinedValue>
+ </TypePropertyTableValue>
+ </PropertyType>
+ </PropertyDef>
+ <PropertyDef>
+ <Name>YoungModulusTension</Name>
+ <Definition>Defining values: α; defined values: elastic modulus in tension.</Definition>
+ <PropertyType>
+ <TypePropertyTableValue>
+ <Expression/>
+ <DefiningValue>
+ <DataType type="IfcPositivePlaneAngleMeasure"/>
+ </DefiningValue>
+ <DefinedValue>
+ <DataType type="IfcModulusOfElasticityMeasure"/>
+ </DefinedValue>
+ </TypePropertyTableValue>
+ </PropertyType>
+ </PropertyDef>
+ <PropertyDef>
+ <Name>YoungModulusCompression</Name>
+ <Definition>Elastic modulus in compression.</Definition>
+ <PropertyType>
+ <TypePropertySingleValue>
+ <DataType type="IfcModulusOfElasticityMeasure"/>
+ </TypePropertySingleValue>
+ </PropertyType>
+ </PropertyDef>
+ <PropertyDef>
+ <Name>ShearModulus</Name>
+ <Definition>A measure of the shear modulus of elasticity of the material.</Definition>
+ <PropertyType>
+ <TypePropertySingleValue>
+ <DataType type="IfcModulusOfElasticityMeasure"/>
+ </TypePropertySingleValue>
+ </PropertyType>
+ </PropertyDef>
+ <PropertyDef>
+ <Name>BendingStrength</Name>
+ <Definition>Defining values: α; defined values: bending strength.</Definition>
+ <PropertyType>
+ <TypePropertyTableValue>
+ <Expression/>
+ <DefiningValue>
+ <DataType type="IfcPositivePlaneAngleMeasure"/>
+ </DefiningValue>
+ <DefinedValue>
+ <DataType type="IfcPressureMeasure"/>
+ </DefinedValue>
+ </TypePropertyTableValue>
+ </PropertyType>
+ </PropertyDef>
+ <PropertyDef>
+ <Name>CompressiveStrength</Name>
+ <Definition>Defining values: α; defined values: compressive strength.</Definition>
+ <PropertyType>
+ <TypePropertyTableValue>
+ <Expression/>
+ <DefiningValue>
+ <DataType type="IfcPositivePlaneAngleMeasure"/>
+ </DefiningValue>
+ <DefinedValue>
+ <DataType type="IfcPressureMeasure"/>
+ </DefinedValue>
+ </TypePropertyTableValue>
+ </PropertyType>
+ </PropertyDef>
+ <PropertyDef>
+ <Name>TensileStrength</Name>
+ <Definition>Defining values: α; defined values: tensile strength.</Definition>
+ <PropertyType>
+ <TypePropertyTableValue>
+ <Expression/>
+ <DefiningValue>
+ <DataType type="IfcPositivePlaneAngleMeasure"/>
+ </DefiningValue>
+ <DefinedValue>
+ <DataType type="IfcPressureMeasure"/>
+ </DefinedValue>
+ </TypePropertyTableValue>
+ </PropertyType>
+ </PropertyDef>
+ <PropertyDef>
+ <Name>ShearStrength</Name>
+ <Definition>Defining values: α; defined values: shear strength.</Definition>
+ <PropertyType>
+ <TypePropertyTableValue>
+ <Expression/>
+ <DefiningValue>
+ <DataType type="IfcPositivePlaneAngleMeasure"/>
+ </DefiningValue>
+ <DefinedValue>
+ <DataType type="IfcPressureMeasure"/>
+ </DefinedValue>
+ </TypePropertyTableValue>
+ </PropertyType>
+ </PropertyDef>
+ <PropertyDef>
+ <Name>BearingStrength</Name>
+ <Definition>Defining values: α; defined values: bearing strength of bolt holes, i.e. intrados pressure.</Definition>
+ <PropertyType>
+ <TypePropertyTableValue>
+ <Expression/>
+ <DefiningValue>
+ <DataType type="IfcPositivePlaneAngleMeasure"/>
+ </DefiningValue>
+ <DefinedValue>
+ <DataType type="IfcPressureMeasure"/>
+ </DefinedValue>
+ </TypePropertyTableValue>
+ </PropertyType>
+ </PropertyDef>
+ <PropertyDef>
+ <Name>RaisedCompressiveStrength</Name>
+ <Definition>Alternative value for compressive strength which may be used under material and code dependent conditions (e.g. if deformation is tolerable, or far from ends of the member); conditions should be stated in SELF\IfcProperty.Description.</Definition>
+ <PropertyType>
+ <TypePropertySingleValue>
+ <DataType type="IfcPressureMeasure"/>
+ </TypePropertySingleValue>
+ </PropertyType>
+ </PropertyDef>
+ <PropertyDef>
+ <Name>ReferenceDepth</Name>
+ <Definition>Depth in bending for which the mechanical properties are valid; provided as a means to check the integrity of material assignment.</Definition>
+ <PropertyType>
+ <TypePropertySingleValue>
+ <DataType type="IfcPositiveLengthMeasure"/>
+ </TypePropertySingleValue>
+ </PropertyType>
+ </PropertyDef>
+ </PropertyDefs>
+</PropertySetDef> |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Remodel what is currently expressed as complex properties.
The text was updated successfully, but these errors were encountered: