Skip to content

Latest commit

 

History

History
68 lines (61 loc) · 1.7 KB

vp-digi-config.md

File metadata and controls

68 lines (61 loc) · 1.7 KB
Raw

vp-digi-config.md

The vp-digi section of the project must be configured using its interface.

Important Notes

  • Run save after you set the config. Very important.

print Output from VP-Digi

Callsign: VA6XXX-0
Destination: APNV01
TXDelay (ms): 1000
TXTail (ms): 30
Quiet time (ms): 300
UART1 baudrate: 9600
UART2 baudrate: 9600
DAC type: PWM
Flat audio input: yes
Beacon 0: On, Iv: 100, Dl: 1, WIDE1-1, >HIJASPER
Beacon 1: Off, Iv: 0, Dl: 0, no path, 
Beacon 2: Off, Iv: 0, Dl: 0, no path, 
Beacon 3: Off, Iv: 0, Dl: 0, no path, 
Beacon 4: Off, Iv: 0, Dl: 0, no path, 
Beacon 5: Off, Iv: 0, Dl: 0, no path, 
Beacon 6: Off, Iv: 0, Dl: 0, no path, 
Beacon 7: Off, Iv: 0, Dl: 0, no path, 
Digipeater: On
Alias WIDE: On, max: 2, rep: 3, untraced, unfiltered
Alias : Off, max: 0, rep: 0, untraced, unfiltered
Alias : Off, max: 0, rep: 0, untraced, unfiltered
Alias : Off, max: 0, rep: 0, untraced, unfiltered
Alias -0: Off, untraced, unfiltered
Alias -0: Off, untraced, unfiltered
Alias -0: Off, untraced, unfiltered
Alias -0: Off, untraced, unfiltered
Anti-duplicate buffer hold time (s): 30
Callsign filter type: blacklist
Callsign filter list: 0 entries
Auto-reset every (h): disabled
KISS monitor: Off
Allow non-APRS frames: Off
  • Note that the beacon 0 text is overwritten with telemetry in the firmware.

Configuration Script

Run this config script in RealTerm or similar to set the configuration above.

Send each line one-by-one. Use LF line endings.

Use 224, 34, 56, 0, 0, 0, 0, 170, 237 to get out of mission boss mode.

config
call VA6XXX
dest APNV01
quiet 300
txdelay 1000
beacon 0 on
beacon 0 iv 1
beacon 0 dl 1
beacon 0 path WIDE1-1
beacon 0 data >HIJASPER
pwm on
flat on
save
monitor
beacon 0