Common: FLIR Vue Pro camera page fixup to settings

ArduPilot · Aug 18, 2023 · c657453 · c657453
1 parent 8102c4d
commit c657453
Showing 1 changed file with 4 additions and 2 deletions.
diff --git a/common/source/docs/common-flir-vue-pro.rst b/common/source/docs/common-flir-vue-pro.rst
@@ -40,9 +40,11 @@ Set the following parameters on the autopilot (assuming Telem2/Serial2 is used):
 
 To allow triggering the taking of pictures during a mission or from a transmitter's auxiliary switch connect the "P3" 3-pin servo connector to the one of the autopilot's servo outputs.  In this example AUX OUT 1 (aka SERVO9) is used.  Then set the following parameters (Assuming the Camera1 instance):
 
-- :ref:`SERVO9_FUNCTION <SERVO9_FUNCTION>` = 10 (Camera Trigger)
+
+- :ref:`CAM1_TYPE<CAM1_TYPE>` = 1 (Servo)
 - :ref:`CAM1_SERVO_ON<CAM1_SERVO_ON>` = 1900
-- `CH8_OPT`` or :ref:`RC8_OPTION <RC8_OPTION>` = 9 (Camera Trigger) to enable triggering from transmitter switch 8
+- :ref:`SERVO9_FUNCTION <SERVO9_FUNCTION>` = 10 (Camera Trigger)
+- :ref:`RC8_OPTION <RC8_OPTION>` = 9 (Camera Trigger) to enable triggering from transmitter switch 8
 
 Configure the Phone
 -------------------