New Toolhead

[lraithel15133]

A new toolhead should be designed so that the X rail can be rotated 90 degrees into the ideal orientation; we can possibly shed some weight and have a 5015 part fan as well. Open to most hotend options at this time, revo and mosquito(fslice) are too pricey probably.

New toolhead should be designed for mgn12c, but hopefully also easily modified for mgn9.
Bowden is preferred for me personally, but I am open to direct drive if we can get some solid weight numbers comparing equivalent toolheads in terms of features.
We are speccing a klicky probe at this time. It must have 0 Y probe offset. Minimal X offset is preferred, and its better if its on the Z axis side of the hotend. Another option is directly under the nozzle (magnets to the carriage parts, centering switch under the nozzle with only z offset)

[CorvidBuilds]

Work in progress

[CorvidBuilds]

Not quite full-featured yet but the shapes are there.

The STEP has been uploaded.

[CorvidBuilds]

Thanks Derp

[CorvidBuilds]

Belt Clamping

[CorvidBuilds]

Hotends supported:

• Dragonfly BMO (rigid mount)
• Revo Micro
• Rapido (rigid mount)
• Dragon (rigid mount)

[CorvidBuilds]

Hotend Fan Testing

[CorvidBuilds]

[CorvidBuilds]