3D prints:
All prints are version controlled in onshape. To generate STL files for Cura, onshape export to STL files using the following settings. Note the Millimeter Units:
Slice STL files with cura and print on lulzbot (lulzbot specific version of cura: https://www.lulzbot.com/cura)
| Part | Quantity | Picture | Notes |
|---|---|---|---|
Arms |
|||
Arm Fulcrum STL |
4 |
|
|
Arm Lock Lock STL |
4 |
||
ESC Mount STL |
4 |
|
|
Body |
|||
Arm / Leg lock STL |
6 |
|
|
Battery Tray |
|||
4 |
|
Mirror 2 in Cura |
|
Hanger side bottom Left STL |
1 |
|
|
Hanger side bottom Right STL |
1 |
|
|
Axil STL |
4 |
|
|
Hanger brace and bracket |
2 |
|
|
Crossbeam STL |
2 |
|
|
Flight Controller Mount STL |
|
||
Flight controller Bottom mount STL |
1 |
|
|
GPS Mount |
|||
Bottom |
1 |
|
|
Screw-down |
1 |
|
|
Arm bottom |
1 |
|
Arm bottom should be cut down to allow for GPS cable to each and be able to be folded |
Arm top |
1 |
|
|
Mast stiffener |
1 |
|
|
Other |
|||
Lidar mount STL |
1 |
|