diff --git a/edg/parts/Lcd_Er_Tft1_28_3.py b/edg/parts/Lcd_Er_Tft1_28_3.py
new file mode 100644
index 000000000..d0a758e19
--- /dev/null
+++ b/edg/parts/Lcd_Er_Tft1_28_3.py
@@ -0,0 +1,105 @@
+from edg.parts.PassiveConnector_Fpc import Fpc050BottomFlip
+from edg import *
+from edg.abstract_parts import *
+
+
+class Er_Tft_128_3_Outline(InternalSubcircuit, FootprintBlock):
+    """Footprint for TFT panel outline"""
+
+    def contents(self) -> None:
+        super().contents()
+        self.footprint('U', 'edg:Lcd_Er_Tft1_28_3_Outline', {},
+                       'EastRising', 'ER-TFT1.28-3',
+                       datasheet='https://www.buydisplay.com/download/manual/ER-TFT1.28-3_Datasheet.pdf')
+
+
+class Er_Tft_128_3_Device(InternalSubcircuit, Nonstrict3v3Compatible, Block):
+    """15-pin FPC connector for the ER-TFT1.28-3 device"""
+
+    def __init__(self) -> None:
+        super().__init__()
+
+        self.conn = self.Block(Fpc050BottomFlip(length=15))
+
+        # Power pins
+        self.vdd = self.Export(self.conn.pins.request('4').adapt_to(VoltageSink(
+            voltage_limits=self.nonstrict_3v3_compatible.then_else(
+                (2.5, 3.6) * Volt,  # abs max is 4.6v
+                (2.5, 3.3) * Volt),
+        )))
+        self.gnd = self.Export(self.conn.pins.request('1').adapt_to(Ground()))
+        # Backlight control
+        self.ledk = self.Export(self.conn.pins.request('2'))
+        self.leda = self.Export(self.conn.pins.request('3'))
+
+        dio_model = DigitalBidir.from_supply(
+            self.gnd, self.vdd,
+            voltage_limit_abs=(-0.3 * Volt, self.vdd.voltage_limits.upper()),
+            input_threshold_factor=(0.3, 0.7)
+        )
+
+        self.rs = self.Export(self.conn.pins.request('5').adapt_to(DigitalSink()))
+
+        # Control pins
+        self.spi = self.Port(SpiPeripheral.empty())
+        self.cs = self.Export(self.conn.pins.request('6').adapt_to(dio_model))
+        self.connect(self.spi.sck, self.conn.pins.request('7').adapt_to(dio_model))
+        self.connect(self.spi.mosi, self.conn.pins.request('8').adapt_to(dio_model))
+
+        self.miso_nc = self.Block(DigitalBidirNotConnected())
+        self.connect(self.spi.miso, self.miso_nc.port)
+
+        self.rst = self.Export(self.conn.pins.request('9').adapt_to(DigitalSink()))
+
+        # Capacitive Touch Panel (CTP)
+        self.ctp_i2c = self.Port(I2cTarget(DigitalBidir.empty(), addresses=[0x15]),)
+
+        self.ctp_vdd = self.Export(self.conn.pins.request('10').adapt_to(VoltageSink(
+            voltage_limits=(2.7, 3.6) * Volt,
+            current_draw=(5 * uAmp, 2.5 * mAmp)
+        )))
+
+        self.connect(self.gnd, self.conn.pins.request('11').adapt_to(Ground()))
+
+        self.ctp_rst = self.Export(self.conn.pins.request('12').adapt_to(dio_model))
+        self.ctp_int = self.Export(self.conn.pins.request('13').adapt_to(dio_model))
+        self.connect(self.ctp_i2c.sda, self.conn.pins.request('14').adapt_to(dio_model))
+        self.connect(self.ctp_i2c.scl, self.conn.pins.request('15').adapt_to(dio_model))
+
+
+class Er_Tft_128_3(Lcd, Resettable, Block):
+    """GC9A01-based 1.28" 240x240 TFT, with optional capacitive touch panel."""
+
+    def __init__(self) -> None:
+        super().__init__()
+        self.ic = self.Block(Er_Tft_128_3_Device())
+        self.gnd = self.Export(self.ic.gnd, [Common])
+        self.pwr = self.Export(self.ic.vdd, [Power])
+        self.spi = self.Export(self.ic.spi)
+        self.cs = self.Export(self.ic.cs)
+        self.dc = self.Export(self.ic.rs)
+        # touch interface
+        self.ctp_i2c = self.Export(self.ic.ctp_i2c, optional=True, doc='Touch panel interface i2c')
+        self.ctp_rst = self.Export(self.ic.ctp_rst, optional=True, doc='Touch panel interface')
+        self.ctp_int = self.Export(self.ic.ctp_int, optional=True, doc='Touch panel interface')
+
+    def contents(self):
+        super().contents()
+        self.connect(self.reset, self.ic.rst)
+        self.require(self.reset.is_connected())
+
+        # self.lcd = self.Block(Er_Tft_128_3_Outline())  # for ic outline
+
+        self.connect(self.ic.ledk.adapt_to(Ground()), self.gnd)
+        forward_current = (1, 30)*mAmp
+        self.led_res = self.Block(Resistor(
+            resistance=(self.pwr.link().voltage.upper() / forward_current.upper(),
+                        self.pwr.link().voltage.lower() / forward_current.lower())))
+        # self.led_res = self.Block(Resistor(50 * Ohm(tol=0.05))) # TODO:  a optional backlight dimming circuit (using a FET from a logic-level control signal).
+
+        self.connect(self.led_res.a.adapt_to(VoltageSink(current_draw=(1, 40) * mAmp)), self.pwr)
+        self.connect(self.led_res.b, self.ic.leda)
+        self.connect(self.pwr, self.ic.ctp_vdd)
+        self.require(self.ctp_i2c.is_connected() == self.ctp_rst.is_connected())
+        self.require(self.ctp_i2c.is_connected() == self.ctp_int.is_connected())
+
diff --git a/edg/parts/__init__.py b/edg/parts/__init__.py
index 5face1e82..96355798b 100644
--- a/edg/parts/__init__.py
+++ b/edg/parts/__init__.py
@@ -114,6 +114,7 @@
 from .Neopixel import Neopixel, Ws2812b, Sk6812Mini_E, Sk6805_Ec15, Sk6812_Side_A, NeopixelArray, NeopixelArrayCircular
 from .Lcd_Qt096t_if09 import Qt096t_if09
 from .Lcd_Ch280qv10_Ct import Ch280qv10_Ct
+from .Lcd_Er_Tft1_28_3 import Er_Tft_128_3
 from .Oled_Er_Oled_091_3 import Er_Oled_091_3
 from .Oled_Er_Oled_096_1_1 import Er_Oled_096_1_1
 from .Oled_Er_Oled_096_1c import Er_Oled_096_1c