Anyone got a Pi 400 running?

[kapone3047]

Has anyone had luck getting this running on a Pi 400? It's all I have given Pi Zero's are impossible to purchase at the moment, and it is supposed to support USB gadget mode.

I've been able to install the toypad emulator (after a couple of hiccups) and have made sure dwc2 is enabled in config.txt and cmdline.txt for gadget mode. But when I connect the Pi to the PS5 nothing is detected.

I've tried using USB-C to USB-C (the PS5 provides 5A, more than enough), and a USB-A (from the Pi) to USB-C on the PS5, with no luck.

[cort1237]

I don't have a Pi4 so I can only give so much help, but I do know that it's the USB C port on the Pi you will have to use. That's the one that supports OTG connections.

It could be something wrong with the cables your using. USB C can be pretty difficult for knowing exactly what a cable is capable of. I'd fish around online for other Pi4 USB Gadgets and see what brand cables they recommend.

[kapone3047]

Thanks. I'll try some other cables around the house and see what suggestions I can find online.

[aussiehuddo]

Did you get this working? I am looking for a more easy to use guide on getting this up and running on a Pi4.
I have installed Pi OS Lite (64-bit) and added wpa_supplicant.conf to /boot and the parameters to config.txt and cmdline.txt but can not see the device when scanning for IP address

EDIT: got it working following this guide up to step 5 https://desertbot.io/blog/headless-raspberry-pi-4-ssh-wifi-setup

1. install Pi OS lite 32-bit
2. enable ssh
3. add wifi network with wpa_supplicant.conf
4. plug in and scan for IP then SSH in and run the commands as listed on https://github.com/Berny23/LD-ToyPad-Emulator

Tested working on PS4 and PS5 with USB-C (from Pi) to USB A (on console)

[kapone3047]

Couldn't get it working on a Pi 400, finally got my hands on a Zero instead. As for Pi 4, my understanding is that it's not capable of gadget mode so won't work.

…

On Sun, Feb 20, 2022 at 1:39 PM aussiehuddo ***@***.***> wrote: Did you get this working? I am looking for a more easy to use guide on getting this up and running on a Pi4. — Reply to this email directly, view it on GitHub <#29 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ALFQB7Q5G3IK6IYMXY5SDALU4BH6HANCNFSM5IQFEY5A> . Triage notifications on the go with GitHub Mobile for iOS <https://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675> or Android <https://play.google.com/store/apps/details?id=com.github.android&referrer=utm_campaign%3Dnotification-email%26utm_medium%3Demail%26utm_source%3Dgithub>. You are receiving this because you authored the thread.Message ID: ***@***.*** com>

[aussiehuddo]

As you can see from my edit in above comment it does work on Pi 4 and it is capable of gadget mode

[kapone3047]

Sorry, only saw your post through email, not on the website so couldn't see that. Good to know it is possible

…

On Wed, 9 Mar 2022, 2:16 pm aussiehuddo, ***@***.***> wrote: As you can see from my edit in above comment it does work on Pi 4 and it is capable of gadget mode — Reply to this email directly, view it on GitHub <#29 (reply in thread)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ALFQB7RUV7AQV2PRSPVCZXLU7AJXHANCNFSM5IQFEY5A> . Triage notifications on the go with GitHub Mobile for iOS <https://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675> or Android <https://play.google.com/store/apps/details?id=com.github.android&referrer=utm_campaign%3Dnotification-email%26utm_medium%3Demail%26utm_source%3Dgithub>. You are receiving this because you authored the thread.Message ID: ***@***.*** com>