diff --git a/libraries/AP_HAL_ChibiOS/hwdef/CarbonixCommon/scripts/cx_built_in_test.lua b/libraries/AP_HAL_ChibiOS/hwdef/CarbonixCommon/scripts/cx_built_in_test.lua index 1abb8d649a..dc74bbdfe6 100644 --- a/libraries/AP_HAL_ChibiOS/hwdef/CarbonixCommon/scripts/cx_built_in_test.lua +++ b/libraries/AP_HAL_ChibiOS/hwdef/CarbonixCommon/scripts/cx_built_in_test.lua @@ -1,243 +1,96 @@ ---[[ - File Name: cx_built_in_test.lua - Description: This script performs a continuous built-in test for various functionalities on Carbonix Aircrafts, focusing on ESC status check and fault detection. - Owner: [Carbonix - Software Team] -]] - --- ******************* Macros ******************* - -local SCRIPT_NAME = 'CX_BIT' -local SCRIPT_VERSION = 1.0 -- Script Version - - --------- MAVLINK/AUTOPILOT 'CONSTANTS' -------- --- MAVLink Severity Levels -local MAV_SEVERITY_CRITICAL = 2 -local MAV_SEVERITY_ERROR = 3 -local MAV_SEVERITY_WARNING = 4 -local MAV_SEVERITY_INFO = 6 - --- Engine Types -local HIRTH_EFI_TYPE = 8 - -local ESC_WARMUP_TIME = 3000 -local SERVO_OUT_THRESHOLD = 1010 -local ESC_RPM_THRESHOLD = 10 --- ******************* Variables ******************* - -local number_of_esc = 5 --default value for Volanti - --- Add a new table to store the warm-up end times for each ESC -local esc_warmup_end_time = {} - -local srv_number = { - [1] = {"Motor1", 33}, - [2] = {"Motor2", 34}, - [3] = {"Motor3", 35}, - [4] = {"Motor4", 36}, - [5] = {"Motor5", 70}, - [6] = {"Motor6", 38}, - [7] = {"Elevator", 19}, - [8] = {"Rudder", 21}, - [9] = {"GPIO", -1}, - [10] = {"Script1", 94}, - [11] = {"Aileron", 4} -} - -local srv_prv_telem_ms = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} -local srv_telem_in_err_status = {false, false, false, false, false, false, false, false, false, false, false, false, false, false, false, false} -local srv_rpm_in_err_status = {false, false, false, false, false, false, false, false, false, false, false, false, false, false, false, false} - --- ******************* Objects ******************* - -local auth_id = arming:get_aux_auth_id() -assert(auth_id, SCRIPT_NAME .. ": could not get a prearm check auth id") - -local params = { - EFI_TYPE = Parameter() -} - - --- ******************* Functions ******************* - --- wrapper for gcs:send_text() -local function gcs_msg(severity, txt) - if type(severity) == 'string' then - -- allow just a string to be passed for simple/routine messages - txt = severity - severity = MAV_SEVERITY_INFO - end - gcs:send_text(severity, string.format('%s: %s', SCRIPT_NAME, txt)) -end - -local function check_aircraft_type() - if params.EFI_TYPE:get() == HIRTH_EFI_TYPE then - number_of_esc = 4 - else - number_of_esc = 5 - end - return true -end - -local function init_param() - for param_name, param in pairs(params) do - if not param:init(param_name) then - return false - end - end - return true -end - -local function arming_check_init() - -- check param fetch - if not init_param() then - arming:set_aux_auth_failed(auth_id, "Parameter Init Failed") - gcs_msg(MAV_SEVERITY_WARNING, "Parameter Init Failed") - return false - end - -- check aircraft Type - if not check_aircraft_type() then - arming:set_aux_auth_failed(auth_id, "Aircraft Type Check Failed") - gcs_msg(MAV_SEVERITY_WARNING, "Aircraft Type Check Failed") - return false - end - gcs_msg(MAV_SEVERITY_INFO, "Script Version " .. SCRIPT_VERSION .. " Initialized") - arming:set_aux_auth_passed(auth_id) - return true -end - --- Call this function whenever a motor starts running -local function esc_is_started(i) - -- Set the warm-up end time for this ESC to 3 seconds from now - esc_warmup_end_time[i] = millis() + ESC_WARMUP_TIME -end - --- Call this function whenever a motor stops running -local function esc_is_stopped(i) - -- Clear the warm-up end time for this ESC - esc_warmup_end_time[i] = nil -end - --- Counters to debounce nil checks on esc rpm and servo output, this is a --- workaround to avoid giving the pilot a critical warning for an unexplained --- one-loop dropout we saw recently -local NIL_WARN_THRESHOLD = 3 -local esc_rpm_nil_counter = {0, 0, 0, 0, 0} -local servo_out_nil_counter = {0, 0, 0, 0, 0} - -local function esc_check_loop() - for i = 1, number_of_esc do - local esc_last_telem_data_ms = esc_telem:get_last_telem_data_ms(i-1):toint() - local esc_rpm = esc_telem:get_rpm(i-1) - local servo_out = SRV_Channels:get_output_pwm(srv_number[i][2]) - -- Telem data timestamp check - if not esc_last_telem_data_ms or esc_last_telem_data_ms == 0 or esc_last_telem_data_ms == srv_prv_telem_ms[i] then - if srv_telem_in_err_status[i] == false then - gcs_msg(MAV_SEVERITY_CRITICAL, "ESC " .. i .. " Telemetry Lost") - srv_telem_in_err_status[i] = true - end - -- Nil check for RPM reading - elseif not esc_rpm then - esc_rpm_nil_counter[i] = esc_rpm_nil_counter[i] + 1 - if esc_rpm_nil_counter[i] < NIL_WARN_THRESHOLD then - gcs_msg(MAV_SEVERITY_INFO, "ESC " .. i .. " RPM nil") - elseif srv_rpm_in_err_status[i] == false then - gcs_msg(MAV_SEVERITY_CRITICAL, "ESC " .. i .. " RPM nil") - srv_telem_in_err_status[i] = true - end - -- Nil check for servo output - elseif not servo_out then - servo_out_nil_counter[i] = servo_out_nil_counter[i] + 1 - if servo_out_nil_counter[i] < NIL_WARN_THRESHOLD then - gcs_msg(MAV_SEVERITY_INFO, "ESC " .. i .. " Servo Out nil") - elseif srv_rpm_in_err_status[i] == false then - gcs_msg(MAV_SEVERITY_CRITICAL, "ESC " .. i .. " Servo Out nil") - srv_telem_in_err_status[i] = true - end - -- Telemetry data is fresh and valid - else - if srv_telem_in_err_status[i] == true then - gcs_msg(MAV_SEVERITY_INFO, "ESC " .. i .. " Telemetry Recovered") - srv_telem_in_err_status[i] = false - servo_out_nil_counter[i] = 0 - esc_rpm_nil_counter[i] = 0 - end - -- If armed, check that the motor is actually turning when it is commanded to - if arming:is_armed() then - -- If the PWM is below the threshold, it is okay for the motor to be stopped - if servo_out < SERVO_OUT_THRESHOLD then - esc_is_stopped(i) - -- If the PWM has just gone above the threshold, start the warm-up timer - elseif servo_out > SERVO_OUT_THRESHOLD and not esc_warmup_end_time[i] then - esc_is_started(i) - -- If the motor is running, and the warmup timer has expired, check that the motor is spinning - elseif esc_warmup_end_time[i] and millis() > esc_warmup_end_time[i] then - if servo_out > SERVO_OUT_THRESHOLD and esc_rpm < ESC_RPM_THRESHOLD then - if srv_rpm_in_err_status[i] == false then - gcs_msg(MAV_SEVERITY_CRITICAL, "ESC " .. i .. " RPM Drop") - srv_rpm_in_err_status[i] = true - end - else - if srv_rpm_in_err_status[i] == true then - gcs_msg(MAV_SEVERITY_INFO, "ESC " .. i .. " RPM Recovered") - srv_rpm_in_err_status[i] = false - end - end - end - end - end - -- Update srv_prv_telem_ms[i] if it had valid data this loop - if esc_last_telem_data_ms and esc_last_telem_data_ms ~= 0 then - srv_prv_telem_ms[i] = esc_last_telem_data_ms - end - end -end - -local function arming_checks() - -- check for status in srv_telem_in_err_status and also CX_SERVO_ERROR bit status - local pre_arm_status = false-- check for status in srv_telem_in_err_status and also CX_SERVO_ERROR bit status - arming:set_aux_auth_passed(auth_id) - - for i, status in ipairs(srv_telem_in_err_status) do - if status == true then - arming:set_aux_auth_failed(auth_id, "Actuator ".. i .. " Telemetry Error") - return false - end - end - if pre_arm_status == false then - arming:set_aux_auth_passed(auth_id) - end - -end - -local function update() - esc_check_loop() - arming_checks() -end - --- wrapper around update(). This calls update() and if update faults --- then an error is displayed, but the script is not stopped -local function protected_wrapper() - local success, err = pcall(update) - if not success then - gcs_msg(MAV_SEVERITY_ERROR, "Internal Error: " .. err) - -- when we fault we run the update function again after 1s, slowing it - -- down a bit so we don't flood the console with errors - return protected_wrapper, 1000 - end - return protected_wrapper, 200 -end - -local function script_exit() - -- pre arm failure SCRIPT_NAME not Running - arming:set_aux_auth_failed(auth_id, SCRIPT_NAME .. " Not Running") - gcs_msg(MAV_SEVERITY_CRITICAL, "LUA SCRIPT EXIT ... Need Reboot to Reinitialize") -end - - --- ******************* Main ******************* -if arming_check_init() then - return protected_wrapper, 10000 -end - -script_exit() +local cx_msg = require("scripts.cx_utils.cx_msg") +local cx_esc = require("scripts.cx_modules.esc") + +-- Create instances of modules +cx_msg = cx_msg.new() + +-- Add modules that require Built-in-test (implemented in cx_modules) +-- Each module should have the following functions: +-- 1. new() - constructor +-- 2. init() - initialize the module +-- 3. update() - update the module +-- 4. check_for_errors() - returns pre-arm checks/errors in the module +-- - built in test errors are managed by each module +local modules = { + esc = cx_esc.new() +} + +-- ******************* Functions ******************* +-- initialize function +local function init() + -- initialize all modules + for _, module in pairs(modules) do + module:init() + end + + cx_msg:send(cx_msg.MAV_SEVERITY_INFO, "LUA script initialized") + return true +end + +-- Pre-arm status check before arming +local function check_prearm_status() + -- Track errors in modules + local modules_with_errors = {} + local total_errors = 0 + + for _, module in pairs(modules) do + local error_count = module:check_for_errors() + if error_count > 0 then + table.insert(modules_with_errors, { name = module.name, errors = error_count }) + total_errors = total_errors + error_count + end + end + + -- Handle error cases + if #modules_with_errors == 0 then + -- No modules have errors, clear error flag + cx_msg:clear_prearm_error() + elseif #modules_with_errors == 1 then + -- Only one module has errors + local module = modules_with_errors[1] + msg = module.name .. " (" .. module.errors .. " checks fail)" + cx_msg:set_prearm_error(msg) + else + -- More than one module has errors + msg = #modules_with_errors .. " modules (" .. total_errors .. " checks) failing. Check messages" + cx_msg:set_prearm_error(msg) + end +end + +-- update function +local function update() + -- update all modules + for _, module in pairs(modules) do + module:update() + end + + check_prearm_status() +end + +-- wrapper around update(). This calls update() and if update faults +-- then an error is displayed, but the script is not stopped +local function protected_wrapper() + local success, err = pcall(update) + if not success then + cx_msg:send(cx_msg.MAV_SEVERITY_ERROR, "Internal Error: " .. err) + -- when we fault we run the update function again after 1s, slowing it + -- down a bit so we don't flood the console with errors + return protected_wrapper, 1000 + end + return protected_wrapper, 200 +end + +-- exit function +local function script_exit() + -- pre arm failure SCRIPT_NAME not Running + arming:set_aux_auth_failed(auth_id, SCRIPT_NAME .. " Not Running") + cx_msg:send(cx_msg.MAV_SEVERITY_CRITICAL, "LUA SCRIPT EXIT ... Need Reboot to Reinitialize") +end + + +-- ******************* Main ******************* +if init() then + return protected_wrapper, 10000 +end + +script_exit() diff --git a/libraries/AP_HAL_ChibiOS/hwdef/CarbonixCommon/scripts/cx_modules/esc.lua b/libraries/AP_HAL_ChibiOS/hwdef/CarbonixCommon/scripts/cx_modules/esc.lua new file mode 100644 index 0000000000..447293bafb --- /dev/null +++ b/libraries/AP_HAL_ChibiOS/hwdef/CarbonixCommon/scripts/cx_modules/esc.lua @@ -0,0 +1,171 @@ +local cx_msg = require("scripts.cx_utils.cx_msg") +local cx_aircraft = require("scripts.cx_utils.cx_aircraft") + +local ESC = {} +ESC.__index = ESC + +-- Constructor +function ESC.new() + local self = setmetatable({}, ESC) + self.name = "ESC" + + self.number_of_esc = 5 + + -- CONSTANTS + self.ESC_WARMUP_TIME = 3000 + self.ESC_RPM_THRESHOLD = 10 + self.SERVO_OUT_THRESHOLD = 1010 + + -- Add a new table to store the warm-up end times for each ESC + self.esc_warmup_end_time = {} + + self.srv_prv_telem_ms = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} + self.srv_telem_in_err_status = {false, false, false, false, false, false, false, false, false, false, false, false, false, false, false, false} + self.srv_rpm_in_err_status = {false, false, false, false, false, false, false, false, false, false, false, false, false, false, false, false} + + + -- Counters to debounce nil checks on esc rpm and servo output, this is a + -- workaround to avoid giving the pilot a critical warning for an unexplained + -- one-loop dropout we saw recently + self.NIL_WARN_THRESHOLD = 3 + self.esc_rpm_nil_counter = {0, 0, 0, 0, 0} + self.servo_out_nil_counter = {0, 0, 0, 0, 0} + + self.srv_number = { + [1] = {"Motor1", 33}, + [2] = {"Motor2", 34}, + [3] = {"Motor3", 35}, + [4] = {"Motor4", 36}, + [5] = {"Motor5", 70}, + [6] = {"Motor6", 38}, + [7] = {"Elevator", 19}, + [8] = {"Rudder", 21}, + [9] = {"GPIO", -1}, + [10] = {"Script1", 94}, + [11] = {"Aileron", 4} + } + + return self +end + +-- Get the number of ESCs based on the aircraft type +function ESC:get_num_esc() + local aircraft_type = cx_aircraft.type + if aircraft_type == "Volanti" then + self.number_of_esc = 5 + elseif aircraft_type == "Ottano" then + self.number_of_esc = 4 + else + self.number_of_esc = 0 + end +end + +-- Initialize the ESC module +function ESC:init() + for i = 1, self.number_of_esc do + self.esc_warmup_end_time[i] = nil + self.srv_prv_telem_ms[i] = 0 + end + cx_msg:send(cx_msg.MAV_SEVERITY_INFO, "ESC init (" .. cx_aircraft.type .. ": " .. self.number_of_esc .. " ESCs)") +end + + +-- Call this function whenever a motor starts running +function ESC:esc_is_started(i) + -- Set the warm-up end time for this ESC to 3 seconds from now + self.esc_warmup_end_time[i] = millis() + self.ESC_WARMUP_TIME +end + +-- Call this function whenever a motor stops running +function ESC:esc_is_stopped(i) + -- Clear the warm-up end time for this ESC + self.esc_warmup_end_time[i] = nil +end + +function ESC:update() + for i = 1, self.number_of_esc do + local esc_last_telem_data_ms = esc_telem:get_last_telem_data_ms(i-1):toint() + local esc_rpm = esc_telem:get_rpm(i-1) + local servo_out = SRV_Channels:get_output_pwm(self.srv_number[i][2]) + -- Telem data timestamp check + if not esc_last_telem_data_ms or esc_last_telem_data_ms == 0 or esc_last_telem_data_ms == self.srv_prv_telem_ms[i] then + if self.srv_telem_in_err_status[i] == false then + cx_msg:send(cx_msg.MAV_SEVERITY_CRITICAL, "ESC " .. i .. " Telemetry Lost") + self.srv_telem_in_err_status[i] = true + end + -- Nil check for RPM reading + elseif not esc_rpm then + self.esc_rpm_nil_counter[i] = self.esc_rpm_nil_counter[i] + 1 + if self.esc_rpm_nil_counter[i] < self.NIL_WARN_THRESHOLD then + cx_msg:send(cx_msg.MAV_SEVERITY_INFO, "ESC " .. i .. " RPM nil") + elseif self.srv_rpm_in_err_status[i] == false then + cx_msg:send(cx_msg.MAV_SEVERITY_CRITICAL, "ESC " .. i .. " RPM nil") + self.srv_telem_in_err_status[i] = true + end + -- Nil check for servo output + elseif not servo_out then + self.servo_out_nil_counter[i] = self.servo_out_nil_counter[i] + 1 + if self.servo_out_nil_counter[i] < self.NIL_WARN_THRESHOLD then + cx_msg:send(cx_msg.MAV_SEVERITY_INFO, "ESC " .. i .. " Servo Out nil") + elseif self.srv_rpm_in_err_status[i] == false then + cx_msg:send(cx_msg.MAV_SEVERITY_CRITICAL, "ESC " .. i .. " Servo Out nil") + self.srv_telem_in_err_status[i] = true + end + -- Telemetry data is fresh and valid + else + if self.srv_telem_in_err_status[i] == true then + cx_msg:send(cx_msg.MAV_SEVERITY_INFO, "ESC " .. i .. " Telemetry Recovered") + self.srv_telem_in_err_status[i] = false + self.servo_out_nil_counter[i] = 0 + self.esc_rpm_nil_counter[i] = 0 + end + -- If armed, check that the motor is actually turning when it is commanded to + if arming:is_armed() then + -- If the PWM is below the threshold, it is okay for the motor to be stopped + if servo_out < self.SERVO_OUT_THRESHOLD then + self:esc_is_stopped(i) + -- If the PWM has just gone above the threshold, start the warm-up timer + elseif servo_out > self.SERVO_OUT_THRESHOLD and not self.esc_warmup_end_time[i] then + self:esc_is_started(i) + -- If the motor is running, and the warmup timer has expired, check that the motor is spinning + elseif self.esc_warmup_end_time[i] and millis() > self.esc_warmup_end_time[i] then + if servo_out > self.SERVO_OUT_THRESHOLD and esc_rpm < self.ESC_RPM_THRESHOLD then + if self.srv_rpm_in_err_status[i] == false then + cx_msg:send(cx_msg.MAV_SEVERITY_CRITICAL, "ESC " .. i .. " RPM Drop") + self.srv_rpm_in_err_status[i] = true + end + else + if self.srv_rpm_in_err_status[i] == true then + cx_msg:send(cx_msg.MAV_SEVERITY_INFO, "ESC " .. i .. " RPM Recovered") + self.srv_rpm_in_err_status[i] = false + end + end + end + end + end + -- Update srv_prv_telem_ms[i] if it had valid data this loop + if esc_last_telem_data_ms and esc_last_telem_data_ms ~= 0 then + self.srv_prv_telem_ms[i] = esc_last_telem_data_ms + end + end +end + +-- Return error code +function ESC:check_for_errors() + local error_count = 0 + for _, status in ipairs(self.srv_telem_in_err_status) do + if status then + error_count = error_count + 1 + end + end + for _, status in ipairs(self.srv_rpm_in_err_status) do + if status then + error_count = error_count + 1 + end + end + + -- No errors found + return error_count +end + +return ESC diff --git a/libraries/AP_HAL_ChibiOS/hwdef/CarbonixCommon/scripts/cx_utils/cx_aircraft.lua b/libraries/AP_HAL_ChibiOS/hwdef/CarbonixCommon/scripts/cx_utils/cx_aircraft.lua new file mode 100644 index 0000000000..b46339c7f8 --- /dev/null +++ b/libraries/AP_HAL_ChibiOS/hwdef/CarbonixCommon/scripts/cx_utils/cx_aircraft.lua @@ -0,0 +1,8 @@ +-- Define the Aircraft class +local cx_aircraft = {} +cx_aircraft.__index = cx_aircraft + +-- set the aircraft type +cx_aircraft.type = "Volanti" + +return cx_aircraft \ No newline at end of file diff --git a/libraries/AP_HAL_ChibiOS/hwdef/CarbonixCommon/scripts/cx_utils/cx_msg.lua b/libraries/AP_HAL_ChibiOS/hwdef/CarbonixCommon/scripts/cx_utils/cx_msg.lua new file mode 100644 index 0000000000..525cfcb478 --- /dev/null +++ b/libraries/AP_HAL_ChibiOS/hwdef/CarbonixCommon/scripts/cx_utils/cx_msg.lua @@ -0,0 +1,48 @@ +local cx_msg = {} +cx_msg.__index = cx_msg + +-- MACROS +SCRIPT_NAME = 'CX_BIT' + +-- MAVLink severity level definitions +cx_msg.MAV_SEVERITY_CRITICAL = 2 +cx_msg.MAV_SEVERITY_ERROR = 3 +cx_msg.MAV_SEVERITY_WARNING = 4 +cx_msg.MAV_SEVERITY_INFO = 6 + +-- auth id for prearm check +function cx_msg.new() + local self = setmetatable({}, cx_msg) + self.prearm_msg = nil + self.auth_id = arming:get_aux_auth_id() + assert(self.auth_id, SCRIPT_NAME .. ": could not get prearm check auth id") + return self +end + +function cx_msg:set_prearm_error(msg) + if self.prearm_msg == nil or self.prearm_msg ~= msg then + self.prearm_msg = msg + arming:set_aux_auth_failed(self.auth_id, msg) + self:send(self.MAV_SEVERITY_WARNING, msg) + end +end + +function cx_msg:clear_prearm_error() + if self.prearm_msg ~= nil then + self.prearm_msg = nil + arming:set_aux_auth_passed(self.auth_id) + self:send(self.MAV_SEVERITY_INFO, "Prearm check passed") + end +end + +-- wrapper for gcs:send_text(). Helps identify cx_bit messages +function cx_msg:send(severity, txt) + if type(severity) == 'string' then + -- allow just a string to be passed for simple/routine messages + txt = severity + severity = self.MAV_SEVERITY_INFO + end + gcs:send_text(severity, string.format('%s: %s', SCRIPT_NAME, txt)) +end + +return cx_msg diff --git a/libraries/AP_HAL_ChibiOS/hwdef/CubeOrange-Ottano/scripts/cx_modules/esc.lua b/libraries/AP_HAL_ChibiOS/hwdef/CubeOrange-Ottano/scripts/cx_modules/esc.lua new file mode 120000 index 0000000000..56e57c74a1 --- /dev/null +++ b/libraries/AP_HAL_ChibiOS/hwdef/CubeOrange-Ottano/scripts/cx_modules/esc.lua @@ -0,0 +1 @@ +../../../CarbonixCommon/scripts/cx_modules/esc.lua \ No newline at end of file diff --git a/libraries/AP_HAL_ChibiOS/hwdef/CubeOrange-Ottano/scripts/cx_utils/cx_aircraft.lua b/libraries/AP_HAL_ChibiOS/hwdef/CubeOrange-Ottano/scripts/cx_utils/cx_aircraft.lua new file mode 100644 index 0000000000..d1ae333c68 --- /dev/null +++ b/libraries/AP_HAL_ChibiOS/hwdef/CubeOrange-Ottano/scripts/cx_utils/cx_aircraft.lua @@ -0,0 +1,8 @@ +-- Define the Aircraft class +local cx_aircraft = {} +cx_aircraft.__index = cx_aircraft + +-- set the aircraft type +cx_aircraft.type = "Ottano" + +return cx_aircraft \ No newline at end of file diff --git a/libraries/AP_HAL_ChibiOS/hwdef/CubeOrange-Ottano/scripts/cx_utils/cx_msg.lua b/libraries/AP_HAL_ChibiOS/hwdef/CubeOrange-Ottano/scripts/cx_utils/cx_msg.lua new file mode 120000 index 0000000000..93be9da6bf --- /dev/null +++ b/libraries/AP_HAL_ChibiOS/hwdef/CubeOrange-Ottano/scripts/cx_utils/cx_msg.lua @@ -0,0 +1 @@ +../../../CarbonixCommon/scripts/cx_utils/cx_msg.lua \ No newline at end of file diff --git a/libraries/AP_HAL_ChibiOS/hwdef/CubeOrange-Volanti/scripts/cx_modules/esc.lua b/libraries/AP_HAL_ChibiOS/hwdef/CubeOrange-Volanti/scripts/cx_modules/esc.lua new file mode 120000 index 0000000000..56e57c74a1 --- /dev/null +++ b/libraries/AP_HAL_ChibiOS/hwdef/CubeOrange-Volanti/scripts/cx_modules/esc.lua @@ -0,0 +1 @@ +../../../CarbonixCommon/scripts/cx_modules/esc.lua \ No newline at end of file diff --git a/libraries/AP_HAL_ChibiOS/hwdef/CubeOrange-Volanti/scripts/cx_utils/cx_aircraft.lua b/libraries/AP_HAL_ChibiOS/hwdef/CubeOrange-Volanti/scripts/cx_utils/cx_aircraft.lua new file mode 100644 index 0000000000..b46339c7f8 --- /dev/null +++ b/libraries/AP_HAL_ChibiOS/hwdef/CubeOrange-Volanti/scripts/cx_utils/cx_aircraft.lua @@ -0,0 +1,8 @@ +-- Define the Aircraft class +local cx_aircraft = {} +cx_aircraft.__index = cx_aircraft + +-- set the aircraft type +cx_aircraft.type = "Volanti" + +return cx_aircraft \ No newline at end of file diff --git a/libraries/AP_HAL_ChibiOS/hwdef/CubeOrange-Volanti/scripts/cx_utils/cx_msg.lua b/libraries/AP_HAL_ChibiOS/hwdef/CubeOrange-Volanti/scripts/cx_utils/cx_msg.lua new file mode 120000 index 0000000000..93be9da6bf --- /dev/null +++ b/libraries/AP_HAL_ChibiOS/hwdef/CubeOrange-Volanti/scripts/cx_utils/cx_msg.lua @@ -0,0 +1 @@ +../../../CarbonixCommon/scripts/cx_utils/cx_msg.lua \ No newline at end of file diff --git a/libraries/AP_HAL_ChibiOS/hwdef/CubeOrangePlus-Ottano/scripts/cx_modules/esc.lua b/libraries/AP_HAL_ChibiOS/hwdef/CubeOrangePlus-Ottano/scripts/cx_modules/esc.lua new file mode 120000 index 0000000000..56e57c74a1 --- /dev/null +++ b/libraries/AP_HAL_ChibiOS/hwdef/CubeOrangePlus-Ottano/scripts/cx_modules/esc.lua @@ -0,0 +1 @@ +../../../CarbonixCommon/scripts/cx_modules/esc.lua \ No newline at end of file diff --git a/libraries/AP_HAL_ChibiOS/hwdef/CubeOrangePlus-Ottano/scripts/cx_utils/cx_aircraft.lua b/libraries/AP_HAL_ChibiOS/hwdef/CubeOrangePlus-Ottano/scripts/cx_utils/cx_aircraft.lua new file mode 100644 index 0000000000..d1ae333c68 --- /dev/null +++ b/libraries/AP_HAL_ChibiOS/hwdef/CubeOrangePlus-Ottano/scripts/cx_utils/cx_aircraft.lua @@ -0,0 +1,8 @@ +-- Define the Aircraft class +local cx_aircraft = {} +cx_aircraft.__index = cx_aircraft + +-- set the aircraft type +cx_aircraft.type = "Ottano" + +return cx_aircraft \ No newline at end of file diff --git a/libraries/AP_HAL_ChibiOS/hwdef/CubeOrangePlus-Ottano/scripts/cx_utils/cx_msg.lua b/libraries/AP_HAL_ChibiOS/hwdef/CubeOrangePlus-Ottano/scripts/cx_utils/cx_msg.lua new file mode 120000 index 0000000000..93be9da6bf --- /dev/null +++ b/libraries/AP_HAL_ChibiOS/hwdef/CubeOrangePlus-Ottano/scripts/cx_utils/cx_msg.lua @@ -0,0 +1 @@ +../../../CarbonixCommon/scripts/cx_utils/cx_msg.lua \ No newline at end of file diff --git a/libraries/AP_HAL_ChibiOS/hwdef/CubeOrangePlus-Volanti/scripts/cx_modules/esc.lua b/libraries/AP_HAL_ChibiOS/hwdef/CubeOrangePlus-Volanti/scripts/cx_modules/esc.lua new file mode 120000 index 0000000000..56e57c74a1 --- /dev/null +++ b/libraries/AP_HAL_ChibiOS/hwdef/CubeOrangePlus-Volanti/scripts/cx_modules/esc.lua @@ -0,0 +1 @@ +../../../CarbonixCommon/scripts/cx_modules/esc.lua \ No newline at end of file diff --git a/libraries/AP_HAL_ChibiOS/hwdef/CubeOrangePlus-Volanti/scripts/cx_utils/cx_aircraft.lua b/libraries/AP_HAL_ChibiOS/hwdef/CubeOrangePlus-Volanti/scripts/cx_utils/cx_aircraft.lua new file mode 100644 index 0000000000..b46339c7f8 --- /dev/null +++ b/libraries/AP_HAL_ChibiOS/hwdef/CubeOrangePlus-Volanti/scripts/cx_utils/cx_aircraft.lua @@ -0,0 +1,8 @@ +-- Define the Aircraft class +local cx_aircraft = {} +cx_aircraft.__index = cx_aircraft + +-- set the aircraft type +cx_aircraft.type = "Volanti" + +return cx_aircraft \ No newline at end of file diff --git a/libraries/AP_HAL_ChibiOS/hwdef/CubeOrangePlus-Volanti/scripts/cx_utils/cx_msg.lua b/libraries/AP_HAL_ChibiOS/hwdef/CubeOrangePlus-Volanti/scripts/cx_utils/cx_msg.lua new file mode 120000 index 0000000000..93be9da6bf --- /dev/null +++ b/libraries/AP_HAL_ChibiOS/hwdef/CubeOrangePlus-Volanti/scripts/cx_utils/cx_msg.lua @@ -0,0 +1 @@ +../../../CarbonixCommon/scripts/cx_utils/cx_msg.lua \ No newline at end of file