diff --git a/libraries/AP_Scripting/examples/bvlos_rc_failsafe.lua b/libraries/AP_Scripting/examples/bvlos_rc_failsafe.lua
new file mode 100644
index 0000000000..68ab7c5628
--- /dev/null
+++ b/libraries/AP_Scripting/examples/bvlos_rc_failsafe.lua
@@ -0,0 +1,120 @@
+--[[
+    File Name: bvlos_rc_failsafe.lua
+    Description: This script provides relaxed handling of RC failsafe in BVLOS scenarios where the RC link is likely to have shorter range than the primary telemetry link, but at large distances, you are less likely to use the RC link.
+]]
+
+local MAV_SEVERITY_EMERGENCY = 0 -- System is unusable. This is a "panic" condition.
+local MAV_SEVERITY_WARNING = 4 -- Indicates about a possible future error if this is not resolved within a given timeframe.
+local MAV_SEVERITY_INFO = 6 -- Normal operational messages. Useful for logging. No action is required for these messages.
+
+local PARAM_TABLE_KEY = 98
+local PARAM_TABLE_PREFIX = "THR_FAIL_"
+
+local UPDATE_RATE_HZ = 2
+
+local auto_modes = {
+    10, -- Auto
+    12, -- Loiter
+    14, -- Avoid_ADSB
+    15, -- Guided
+    25, -- Loiter to QLand
+}
+
+-- bind a parameter to a variable
+local function bind_param(name)
+    local p = Parameter()
+    assert(p:init(name), string.format('could not find %s parameter', name))
+    return p
+end
+
+-- add a parameter and bind it to a variable
+local function bind_add_param(name, idx, default_value)
+    assert(param:add_param(PARAM_TABLE_KEY, idx, name, default_value), string.format('could not add param %s', name))
+    return bind_param(PARAM_TABLE_PREFIX .. name)
+end
+
+local function contains(table, element)
+    for _, value in pairs(table) do
+        if value == element then
+            return true
+        end
+    end
+    return false
+end
+
+-- get time in seconds since boot
+local function get_time()
+    return millis():tofloat() * 0.001
+end
+
+ -- setup quicktune specific parameters
+assert(param:add_table(PARAM_TABLE_KEY, PARAM_TABLE_PREFIX, 13), 'could not add param table')
+
+local THR_FAILSAFE = bind_param('THR_FAILSAFE')
+
+--[[
+  // @Param: THR_FAIL_RANGE
+  // @DisplayName: Throttle Failsafe Range
+  // @Description: Range, in meters, for which the throttle failsafe will be active
+  // @Units: m
+  // @Range: 0 100000
+  // @User: Standard
+--]]
+local RANGE  = bind_add_param('RANGE', 1, 5000)
+
+-- flag to track if failsafe should be enabled
+local failsafe_enabled = false
+
+-- timestamp of last mode warning
+local last_mode_warning = 0
+
+-- update function, called at UPDATE_RATE_HZ
+local function update()
+    local distance = 0
+    local home = ahrs:get_home()
+    local cur_loc = ahrs:get_location()
+
+    if home and cur_loc then
+        distance = home:get_distance(cur_loc)
+    end
+
+    local should_enable = true
+
+    -- If we are far away, disable RC failsafe
+    if distance > RANGE:get() then
+        should_enable = false
+        -- send a warning if we are far away and in a non-auto mode
+        if get_time() - last_mode_warning > 10 then
+            if not contains(auto_modes, vehicle:get_mode()) then
+                gcs:send_text(MAV_SEVERITY_WARNING, "Warning: beyond RC range")
+                last_mode_warning = get_time()
+            end
+        end
+    end
+
+    if should_enable and not failsafe_enabled then
+        -- enable failsafe
+        gcs:send_text(MAV_SEVERITY_INFO, "RC Failsafe Enabled")
+        failsafe_enabled = true
+        THR_FAILSAFE:set(1)
+    elseif not should_enable and failsafe_enabled then
+        -- disable failsafe
+        gcs:send_text(MAV_SEVERITY_INFO, "RC Failsafe Disabled")
+        failsafe_enabled = false
+        THR_FAILSAFE:set(2)
+    end
+end
+
+local function protected_wrapper()
+    local success, err = pcall(update)
+    if not success then
+        gcs:send_text(MAV_SEVERITY_EMERGENCY, "Internal Error: " .. err)
+        -- when we fault we run the update function again after 1s, slowing it
+        -- down a bit so we don't flood the console with errors
+        return protected_wrapper, 1000
+    end
+    return protected_wrapper, 1000/UPDATE_RATE_HZ
+end
+
+-- start running update loop
+return protected_wrapper()