Update and rename custom-cinepi.md to cinepi-v2.md

docs/cinepi-v2.md

@@ -0,0 +1,34 @@
+# CinePI V2: OpenSource Cinema Camera using Raspberry Pi
+![Banner](/hero-banner.jpg)
+ 
+
+# Introduction
+
+The CinePI V2 is an OpenSource Camera design utilzing off-the-shelf / DIY hardware & software from vendors including: Raspberry Pi, Pimoroni, Adafruit, Sparkfun, etc...
+
+The purpose of this repository and it's accomanying resocures is primarly to act as a template / starting point for your own design. CAD files are included for you to modify the enclosure to your needs, feel free to experiment with the parts used; use a different set of buttons, RTC, display, etc... the only components that cannot be changed are the Raspberry Pi 4B and the High Quality Camera Module. 
+
+> ## Notice 
+> 
+> This design makes a number of modifications to hardware, as such is not recommended for those not comfortable with a soldering iron.
+> 
+> Warranties may be void. I am not responsible for any damages that accompany hardware modifications. 
+
+# Features
+
+- Super8 Sized Sensor ( Sony IMX477 )
+- 12-bit CinemaDNG Recording
+- 4.0" High Res Touch Screen Interface
+- Internal High Capacity Battery 
+- Real time clock 
+- USB 3.0 External SSD Recording
+- 1/4" Mounting Points
+- 40mm Noctua Cooling System 
+
+# Guide
+
+Refer to the Wiki section for in-depth guide on hardware assembly and software installation. 
+
+# References
+
+CinePI Project Account | [Github Page](https://github.com/cinepi)