dynamic templates not working (Honeyd V1.6d)

[bala150985]

The following is my configure file for honeyd, I cannot get honeyd reply with an icmp even when the source is from 192.168.1.2. I did check to see that interface on which honeyd is running is receiving ARP request for who has 192.168.1.160.

create default
set default default tcp action block
set default default udp action block
set default default icmp action block

create linux
set linux personality "Linux 2.6.20-1 (Fedora Core 5)"
set linux ethernet "cisco"
add linux tcp port 22 "/etc/honeyd/echo.sh"

dynamic magichost
add magichost use linux if source ip = 192.168.1.2
add magichost otherwise use default

bind 192.168.1.160 magichost

---

honeyd -d -f demo3 -p nmap-os-db -l log/honeyd.log -s log/service.log -i eth2 192.168.1.160
Honeyd V1.6d Copyright (c) 2002-2007 Niels Provos
honeyd[2456]: started with -d -f demo3 -p nmap-os-db -l log/honeyd.log -s log/service.log -i eth2 192.168.1.160
honeyd[2456]: listening promiscuously on eth2: (arp or ip proto 47 or (udp and src port 67 and dst port 68) or (ip and (host 192.168.1.160))) and not ether src 08:00:27:f8:f0:2e
honeyd[2456]: Demoting process privileges to uid 65534, gid 65534
^Choneyd[2456]: exiting on signal 2

[bala150985]

Alternatively the short-cut in the bind also did not work.

create default
set default default tcp action block
set default default udp action block
set default default icmp action block

create linux
set linux personality "Linux 2.6.20-1 (Fedora Core 5)"
set linux ethernet "cisco"
add linux tcp port 22 "/etc/honeyd/echo.sh"

#dynamic magichost
#add magichost use linux if source ip = 192.168.1.2
#add magichost otherwise use default

#bind 192.168.1.160 magichost

bind source ip = 192.168.1.3/32 192.168.1.160 linux
bind source ip = 192.168.1.2/32 192.168.1.160 default