plz add support for MX35LF4G24AD-Z4I

[li60240]

MX35LF4G24AD
MX35LF4G24AD-Z4I

[Droid-MAX]

Well done, feedback in time plz

[li60240]

thanks for your hard work.I have try flash the spinand with on die ecc,buy something wrong.
status code:Bad in the end.

[li60240]

thanks for your hard work.I have try flash the spinand with on die ecc,buy something wrong. status code:Bad in the end.

disable ecc flashing it also failed with code Bad.

[Droid-MAX]

Something's wrong. It only took 26 seconds to write？

[li60240]

Something's wrong. It only took 26 seconds to write？

是的，我只刷写了5.5M文件，开启ecc或者关闭ec，验证全部失败

[Droid-MAX]

你没先给擦除一下？

[li60240]

你没先给擦除一下？

刷写之前有使用 -e选项先擦除的。有尝试过刷写整个带oob数据的固件（544M）。
流程如下:1 先使用命令 snander -d -e 擦除芯片。
2. 使用命令 snander -d -v -w.544.bin 刷写。
3. 结果验证环节status code都显示BAD

现在整个情况就是，不管如何刷写，到最后验证都会验证失败。我有尝试忽略验证失败直接上机，结果也是未识别到芯片

[li60240]

你没先给擦除一下？

查看了下这芯片的datasheet，MX35LF2G(4G)24AD-Z4I版本是two-plane双层结构，必须开启ecc,并且需要Plane Select 位，这个可以

适配吗

[Droid-MAX]

now you can download latest release and try again.

[li60240]

now you can download latest release and try again.
I have downloaded the latest version and tried again. The same problem still exists with chip MX35LF4G24AD-Z4I and it cannot pass the verification process.Same error as the previous version.

[Droid-MAX]

Can test with disable internal ecc features?

[li60240]

Can test with disable internal ecc features?

i haved disable the ecc feature and flashing verification process failed as before.

I have already erased the chip with "-d" before starting to flash it.

[Droid-MAX]

@li60240 试过全片编程没？

[li60240]

@li60240 试过全片编程没？

尝试过，我上面给你的反馈截图就是全片512M+32M 禁用ecc特性，全片编程。