From 94324cfdba35a919c80daea0a2f8b444962a4345 Mon Sep 17 00:00:00 2001 From: Olof Astrand Date: Sat, 10 Feb 2018 10:27:13 +0100 Subject: [PATCH] Added info --- README.md | 39 + STM32L151XBA_FLASH.ld | 166 + lib/Retarget_printf/src/printf.c | 571 ++ lib/crypto/aes.c | 936 ++ lib/crypto/aes.h | 160 + lib/crypto/cmac.c | 153 + lib/crypto/cmac.h | 63 + lib/radio/radio.h | 335 + lib/radio/sx1276/sx1276.c | 1816 ++++ lib/radio/sx1276/sx1276.h | 407 + lib/radio/sx1276/sx1276Regs-Fsk.h | 1134 +++ lib/radio/sx1276/sx1276Regs-LoRa.h | 565 ++ lib/readme.txt | 36 + lib/system_utils/adc.h | 50 + lib/system_utils/delay.h | 29 + lib/system_utils/eeprom.h | 56 + lib/system_utils/fifo.h | 80 + lib/system_utils/gpio.h | 168 + lib/system_utils/gps.h | 144 + lib/system_utils/i2c.h | 93 + lib/system_utils/serial.h | 18 + lib/system_utils/spi.h | 76 + lib/system_utils/src/adc.c | 49 + lib/system_utils/src/delay.c | 25 + lib/system_utils/src/eeprom.c | 37 + lib/system_utils/src/fifo.c | 58 + lib/system_utils/src/gpio.c | 117 + lib/system_utils/src/gps.c | 648 ++ lib/system_utils/src/i2c.c | 122 + lib/system_utils/src/timer.c | 405 + lib/system_utils/src/uart.c | 170 + lib/system_utils/timer.h | 110 + lib/system_utils/uart.h | 167 + platformio.ini | 20 + rak811.json | 32 + src/Commissioning.h | 77 + src/RAK811BreakBoard/adc-board.c | 94 + src/RAK811BreakBoard/adc-board.h | 39 + src/RAK811BreakBoard/board.c | 410 + src/RAK811BreakBoard/board.c~ | 410 + src/RAK811BreakBoard/board.h | 225 + src/RAK811BreakBoard/cmsis/mxconstants.h | 57 + src/RAK811BreakBoard/cmsis/stm32l151xb.h | 8080 +++++++++++++++++ src/RAK811BreakBoard/cmsis/stm32l151xba.h | 5225 +++++++++++ src/RAK811BreakBoard/cmsis/stm32l1xx.h | 264 + .../cmsis/stm32l1xx_hal_conf.h | 287 + src/RAK811BreakBoard/cmsis/system_stm32l1xx.c | 444 + src/RAK811BreakBoard/cmsis/system_stm32l1xx.h | 126 + src/RAK811BreakBoard/eeprom-board.c | 216 + src/RAK811BreakBoard/eeprom-board.h | 56 + src/RAK811BreakBoard/gpio-board.c | 330 + src/RAK811BreakBoard/gpio-board.h | 74 + src/RAK811BreakBoard/gps-board.c | 134 + src/RAK811BreakBoard/gps-board.h | 64 + src/RAK811BreakBoard/i2c-board.c | 148 + src/RAK811BreakBoard/i2c-board.h | 121 + src/RAK811BreakBoard/pinName-board.h | 30 + src/RAK811BreakBoard/pinName-ioe.h | 22 + src/RAK811BreakBoard/rtc-board.c | 720 ++ src/RAK811BreakBoard/rtc-board.h | 96 + src/RAK811BreakBoard/spi-board.c | 173 + src/RAK811BreakBoard/spi-board.h | 30 + src/RAK811BreakBoard/sx1276-board.c | 227 + src/RAK811BreakBoard/sx1276-board.h | 120 + src/RAK811BreakBoard/uart-board.c | 357 + src/RAK811BreakBoard/uart-board.h | 96 + src/RAK811BreakBoard/uart-usb-board.c | 112 + src/RAK811BreakBoard/uart-usb-board.h | 82 + .../cmsis/arm-gcc/STM32L151XBA_FLASH.ld | 166 + .../cmsis/arm-gcc/STM32L151XB_FLASH.ld | 166 + src/boards/mcu/stm32/RTE_Components.h | 14 + .../Inc/Legacy/stm32_hal_legacy.h | 3134 +++++++ .../Inc/stm32_assert_template.h | 75 + .../STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal.h | 964 ++ .../Inc/stm32l1xx_hal_adc.h | 1333 +++ .../Inc/stm32l1xx_hal_adc_ex.h | 590 ++ .../Inc/stm32l1xx_hal_comp.h | 614 ++ .../Inc/stm32l1xx_hal_comp_ex.h | 336 + .../Inc/stm32l1xx_hal_conf_template.h | 291 + .../Inc/stm32l1xx_hal_cortex.h | 486 + .../Inc/stm32l1xx_hal_crc.h | 192 + .../Inc/stm32l1xx_hal_cryp.h | 418 + .../Inc/stm32l1xx_hal_cryp_ex.h | 98 + .../Inc/stm32l1xx_hal_dac.h | 404 + .../Inc/stm32l1xx_hal_dac_ex.h | 190 + .../Inc/stm32l1xx_hal_def.h | 213 + .../Inc/stm32l1xx_hal_dma.h | 695 ++ .../Inc/stm32l1xx_hal_dma_ex.h | 244 + .../Inc/stm32l1xx_hal_flash.h | 429 + .../Inc/stm32l1xx_hal_flash_ex.h | 986 ++ .../Inc/stm32l1xx_hal_flash_ramfunc.h | 137 + .../Inc/stm32l1xx_hal_gpio.h | 338 + .../Inc/stm32l1xx_hal_gpio_ex.h | 223 + .../Inc/stm32l1xx_hal_i2c.h | 669 ++ .../Inc/stm32l1xx_hal_i2s.h | 450 + .../Inc/stm32l1xx_hal_irda.h | 579 ++ .../Inc/stm32l1xx_hal_iwdg.h | 239 + .../Inc/stm32l1xx_hal_lcd.h | 779 ++ .../Inc/stm32l1xx_hal_nor.h | 306 + .../Inc/stm32l1xx_hal_opamp.h | 539 ++ .../Inc/stm32l1xx_hal_opamp_ex.h | 274 + .../Inc/stm32l1xx_hal_pcd.h | 856 ++ .../Inc/stm32l1xx_hal_pcd_ex.h | 97 + .../Inc/stm32l1xx_hal_pwr.h | 504 + .../Inc/stm32l1xx_hal_pwr_ex.h | 136 + .../Inc/stm32l1xx_hal_rcc.h | 1918 ++++ .../Inc/stm32l1xx_hal_rcc_ex.h | 1050 +++ .../Inc/stm32l1xx_hal_rtc.h | 703 ++ .../Inc/stm32l1xx_hal_rtc_ex.h | 1293 +++ .../Inc/stm32l1xx_hal_sd.h | 796 ++ .../Inc/stm32l1xx_hal_smartcard.h | 698 ++ .../Inc/stm32l1xx_hal_spi.h | 571 ++ .../Inc/stm32l1xx_hal_spi_ex.h | 106 + .../Inc/stm32l1xx_hal_sram.h | 201 + .../Inc/stm32l1xx_hal_tim.h | 1606 ++++ .../Inc/stm32l1xx_hal_tim_ex.h | 194 + .../Inc/stm32l1xx_hal_uart.h | 767 ++ .../Inc/stm32l1xx_hal_usart.h | 630 ++ .../Inc/stm32l1xx_hal_wwdg.h | 287 + .../Inc/stm32l1xx_ll_adc.h | 5177 +++++++++++ .../Inc/stm32l1xx_ll_bus.h | 1121 +++ .../Inc/stm32l1xx_ll_comp.h | 865 ++ .../Inc/stm32l1xx_ll_cortex.h | 657 ++ .../Inc/stm32l1xx_ll_crc.h | 212 + .../Inc/stm32l1xx_ll_dac.h | 1313 +++ .../Inc/stm32l1xx_ll_dma.h | 2033 +++++ .../Inc/stm32l1xx_ll_exti.h | 1032 +++ .../Inc/stm32l1xx_ll_fsmc.h | 580 ++ .../Inc/stm32l1xx_ll_gpio.h | 1005 ++ .../Inc/stm32l1xx_ll_i2c.h | 1793 ++++ .../Inc/stm32l1xx_ll_iwdg.h | 329 + .../Inc/stm32l1xx_ll_opamp.h | 929 ++ .../Inc/stm32l1xx_ll_pwr.h | 740 ++ .../Inc/stm32l1xx_ll_rcc.h | 1831 ++++ .../Inc/stm32l1xx_ll_rtc.h | 3854 ++++++++ .../Inc/stm32l1xx_ll_sdmmc.h | 912 ++ .../Inc/stm32l1xx_ll_spi.h | 2007 ++++ .../Inc/stm32l1xx_ll_system.h | 1975 ++++ .../Inc/stm32l1xx_ll_tim.h | 3331 +++++++ .../Inc/stm32l1xx_ll_usart.h | 2539 ++++++ .../Inc/stm32l1xx_ll_utils.h | 287 + .../Inc/stm32l1xx_ll_wwdg.h | 342 + .../STM32L1xx_HAL_Driver/Src/stm32l1xx_hal.c | 454 + .../Src/stm32l1xx_hal_adc.c | 2090 +++++ .../Src/stm32l1xx_hal_adc_ex.c | 886 ++ .../Src/stm32l1xx_hal_comp.c | 827 ++ .../Src/stm32l1xx_hal_cortex.c | 494 + .../Src/stm32l1xx_hal_crc.c | 351 + .../Src/stm32l1xx_hal_cryp.c | 2181 +++++ .../Src/stm32l1xx_hal_cryp_ex.c | 121 + .../Src/stm32l1xx_hal_dac.c | 1001 ++ .../Src/stm32l1xx_hal_dac_ex.c | 394 + .../Src/stm32l1xx_hal_dma.c | 915 ++ .../Src/stm32l1xx_hal_flash.c | 723 ++ .../Src/stm32l1xx_hal_flash_ex.c | 1871 ++++ .../Src/stm32l1xx_hal_flash_ramfunc.c | 674 ++ .../Src/stm32l1xx_hal_gpio.c | 562 ++ .../Src/stm32l1xx_hal_i2c.c | 5343 +++++++++++ .../Src/stm32l1xx_hal_i2s.c | 1412 +++ .../Src/stm32l1xx_hal_irda.c | 1573 ++++ .../Src/stm32l1xx_hal_iwdg.c | 263 + .../Src/stm32l1xx_hal_lcd.c | 633 ++ .../Src/stm32l1xx_hal_msp_template.c | 111 + .../Src/stm32l1xx_hal_nor.c | 1060 +++ .../Src/stm32l1xx_hal_opamp.c | 1089 +++ .../Src/stm32l1xx_hal_opamp_ex.c | 824 ++ .../Src/stm32l1xx_hal_pcd.c | 1415 +++ .../Src/stm32l1xx_hal_pcd_ex.c | 154 + .../Src/stm32l1xx_hal_pwr.c | 668 ++ .../Src/stm32l1xx_hal_pwr_ex.c | 179 + .../Src/stm32l1xx_hal_rcc.c | 1344 +++ .../Src/stm32l1xx_hal_rcc_ex.c | 452 + .../Src/stm32l1xx_hal_rtc.c | 922 ++ .../Src/stm32l1xx_hal_rtc_ex.c | 2557 ++++++ .../Src/stm32l1xx_hal_sd.c | 3472 +++++++ .../Src/stm32l1xx_hal_smartcard.c | 1323 +++ .../Src/stm32l1xx_hal_spi.c | 2269 +++++ .../Src/stm32l1xx_hal_spi_ex.c | 156 + .../Src/stm32l1xx_hal_sram.c | 696 ++ .../Src/stm32l1xx_hal_tim.c | 5184 +++++++++++ .../Src/stm32l1xx_hal_tim_ex.c | 219 + .../Src/stm32l1xx_hal_uart.c | 1944 ++++ .../Src/stm32l1xx_hal_usart.c | 1901 ++++ .../Src/stm32l1xx_hal_wwdg.c | 322 + .../Src/stm32l1xx_ll_adc.c | 896 ++ .../Src/stm32l1xx_ll_comp.c | 348 + .../Src/stm32l1xx_ll_crc.c | 125 + .../Src/stm32l1xx_ll_dac.c | 273 + .../Src/stm32l1xx_ll_dma.c | 383 + .../Src/stm32l1xx_ll_exti.c | 232 + .../Src/stm32l1xx_ll_fsmc.c | 444 + .../Src/stm32l1xx_ll_gpio.c | 305 + .../Src/stm32l1xx_ll_i2c.c | 237 + .../Src/stm32l1xx_ll_opamp.c | 298 + .../Src/stm32l1xx_ll_pwr.c | 103 + .../Src/stm32l1xx_ll_rcc.c | 320 + .../Src/stm32l1xx_ll_rtc.c | 908 ++ .../Src/stm32l1xx_ll_sdmmc.c | 508 ++ .../Src/stm32l1xx_ll_spi.c | 553 ++ .../Src/stm32l1xx_ll_tim.c | 889 ++ .../Src/stm32l1xx_ll_usart.c | 429 + .../Src/stm32l1xx_ll_utils.c | 594 ++ .../Class/CDC/Inc/usbd_cdc.h | 179 + .../Class/CDC/Src/usbd_cdc.c | 925 ++ .../Class/DFU/Inc/usbd_dfu.h | 235 + .../Class/DFU/Src/usbd_dfu.c | 1109 +++ .../Core/Inc/usbd_core.h | 167 + .../Core/Inc/usbd_ctlreq.h | 113 + .../Core/Inc/usbd_def.h | 333 + .../Core/Inc/usbd_ioreq.h | 128 + .../Core/Src/usbd_core.c | 565 ++ .../Core/Src/usbd_ctlreq.c | 782 ++ .../Core/Src/usbd_ioreq.c | 236 + .../mcu/stm32/cmsis/arm_common_tables.h | 136 + .../mcu/stm32/cmsis/arm_const_structs.h | 79 + src/boards/mcu/stm32/cmsis/arm_math.h | 7154 +++++++++++++++ src/boards/mcu/stm32/cmsis/cmsis_armcc.h | 734 ++ src/boards/mcu/stm32/cmsis/cmsis_armcc_V6.h | 1800 ++++ src/boards/mcu/stm32/cmsis/cmsis_gcc.h | 1373 +++ src/boards/mcu/stm32/cmsis/core_cm0.h | 798 ++ src/boards/mcu/stm32/cmsis/core_cm0plus.h | 914 ++ src/boards/mcu/stm32/cmsis/core_cm3.h | 1763 ++++ src/boards/mcu/stm32/cmsis/core_cm4.h | 1937 ++++ src/boards/mcu/stm32/cmsis/core_cm7.h | 2512 +++++ src/boards/mcu/stm32/cmsis/core_cmFunc.h | 87 + src/boards/mcu/stm32/cmsis/core_cmInstr.h | 87 + src/boards/mcu/stm32/cmsis/core_cmSimd.h | 96 + src/boards/mcu/stm32/cmsis/core_sc000.h | 926 ++ src/boards/mcu/stm32/cmsis/core_sc300.h | 1745 ++++ src/boards/mcu/stm32/sysIrqHandlers.c | 145 + src/boards/mcu/stm32/utilities.c | 85 + src/boards/mcu/stm32/utilities.h | 99 + src/mac/LoRaMac.c | 3369 +++++++ src/mac/LoRaMac.h | 1961 ++++ src/mac/LoRaMacCrypto.c | 202 + src/mac/LoRaMacCrypto.h | 111 + src/mac/LoRaMacTest.h | 81 + src/mac/region/Region.c | 1037 +++ src/mac/region/Region.h | 1492 +++ src/mac/region/RegionAS923.c | 1102 +++ src/mac/region/RegionAS923.h | 503 + src/mac/region/RegionAU915.c | 857 ++ src/mac/region/RegionAU915.h | 455 + src/mac/region/RegionCN470.c | 807 ++ src/mac/region/RegionCN470.h | 441 + src/mac/region/RegionCN779.c | 1045 +++ src/mac/region/RegionCN779.h | 465 + src/mac/region/RegionCommon.c | 362 + src/mac/region/RegionCommon.h | 367 + src/mac/region/RegionEU433.c | 1045 +++ src/mac/region/RegionEU433.h | 466 + src/mac/region/RegionEU868.c | 1081 +++ src/mac/region/RegionEU868.h | 487 + src/mac/region/RegionIN865.c | 1045 +++ src/mac/region/RegionIN865.h | 468 + src/mac/region/RegionKR920.c | 1046 +++ src/mac/region/RegionKR920.h | 478 + src/mac/region/RegionUS915-Hybrid.c | 958 ++ src/mac/region/RegionUS915-Hybrid.h | 448 + src/mac/region/RegionUS915.c | 870 ++ src/mac/region/RegionUS915.h | 448 + src/main.c | 935 ++ src/peripherals/gpio-ioe.c | 277 + src/peripherals/gpio-ioe.h | 65 + src/peripherals/lis3dh.c | 1919 ++++ src/peripherals/lis3dh.h | 588 ++ src/peripherals/lis3dh.h~RF65283d0.TMP | 587 ++ src/peripherals/mag3110.c | 79 + src/peripherals/mag3110.h | 94 + src/peripherals/mma8451.c | 175 + src/peripherals/mma8451.h | 76 + src/peripherals/mpl3115.c | 405 + src/peripherals/mpl3115.h | 148 + src/peripherals/pam7q.c | 100 + src/peripherals/pam7q.h | 48 + src/peripherals/selector.c | 59 + src/peripherals/selector.h | 25 + src/peripherals/sx1509.c | 73 + src/peripherals/sx1509.h | 206 + src/peripherals/sx9500.c | 110 + src/peripherals/sx9500.h | 111 + src/stm32l0xx.h | 245 + src/stm32l0xx_hal_conf.h | 313 + src/usb/cdc/inc/usbd_cdc_if.h | 123 + src/usb/cdc/inc/usbd_conf.h | 174 + src/usb/cdc/inc/usbd_desc.h | 103 + src/usb/cdc/src/usbd_cdc_if.c | 349 + src/usb/cdc/src/usbd_conf.c | 508 ++ src/usb/cdc/src/usbd_desc.c | 297 + src/usb/dfu/inc/usbd_conf.h | 121 + src/usb/dfu/inc/usbd_desc.h | 68 + src/usb/dfu/inc/usbd_dfu_flash.h | 66 + src/usb/dfu/src/usbd_conf.c | 494 + src/usb/dfu/src/usbd_desc.c | 266 + src/usb/dfu/src/usbd_dfu_flash.c | 212 + stm32flash_src/AUTHORS | 27 + stm32flash_src/Android.mk | 20 + stm32flash_src/HOWTO | 35 + stm32flash_src/I2C.txt | 94 + stm32flash_src/INSTALL | 16 + stm32flash_src/Makefile | 40 + stm32flash_src/README.md | 19 + stm32flash_src/TODO | 4 + stm32flash_src/dev_table.c | 110 + stm32flash_src/file.flash | Bin 0 -> 131072 bytes stm32flash_src/firmware.bin | Bin 0 -> 14776 bytes stm32flash_src/gpl-2.0.txt | 339 + stm32flash_src/i2c.c | 209 + stm32flash_src/init.c | 272 + stm32flash_src/init.h | 31 + stm32flash_src/main.c | 885 ++ stm32flash_src/parsers/Android.mk | 6 + stm32flash_src/parsers/Makefile | 12 + stm32flash_src/parsers/binary.c | 140 + stm32flash_src/parsers/binary.h | 27 + stm32flash_src/parsers/hex.c | 229 + stm32flash_src/parsers/hex.h | 27 + stm32flash_src/parsers/parser.h | 56 + stm32flash_src/port.c | 59 + stm32flash_src/port.h | 75 + stm32flash_src/protocol.txt | 19 + stm32flash_src/serial.h | 91 + stm32flash_src/serial_common.c | 154 + stm32flash_src/serial_platform.c | 5 + stm32flash_src/serial_posix.c | 356 + stm32flash_src/serial_w32.c | 350 + stm32flash_src/stm32.c | 1125 +++ stm32flash_src/stm32.h | 94 + stm32flash_src/stm32flash.1 | 413 + stm32flash_src/utils.c | 45 + stm32flash_src/utils.h | 30 + 331 files changed, 216295 insertions(+) create mode 100644 README.md create mode 100755 STM32L151XBA_FLASH.ld create mode 100755 lib/Retarget_printf/src/printf.c create mode 100755 lib/crypto/aes.c create mode 100755 lib/crypto/aes.h create mode 100755 lib/crypto/cmac.c create mode 100755 lib/crypto/cmac.h create mode 100755 lib/radio/radio.h create mode 100755 lib/radio/sx1276/sx1276.c create mode 100755 lib/radio/sx1276/sx1276.h create mode 100755 lib/radio/sx1276/sx1276Regs-Fsk.h create mode 100755 lib/radio/sx1276/sx1276Regs-LoRa.h create mode 100644 lib/readme.txt create mode 100755 lib/system_utils/adc.h create mode 100755 lib/system_utils/delay.h create mode 100755 lib/system_utils/eeprom.h create mode 100755 lib/system_utils/fifo.h create mode 100755 lib/system_utils/gpio.h create mode 100755 lib/system_utils/gps.h create mode 100755 lib/system_utils/i2c.h create mode 100755 lib/system_utils/serial.h create mode 100755 lib/system_utils/spi.h create mode 100755 lib/system_utils/src/adc.c create mode 100755 lib/system_utils/src/delay.c create mode 100755 lib/system_utils/src/eeprom.c create mode 100755 lib/system_utils/src/fifo.c create mode 100755 lib/system_utils/src/gpio.c create mode 100755 lib/system_utils/src/gps.c create mode 100755 lib/system_utils/src/i2c.c create mode 100755 lib/system_utils/src/timer.c create mode 100755 lib/system_utils/src/uart.c create mode 100755 lib/system_utils/timer.h create mode 100755 lib/system_utils/uart.h create mode 100644 platformio.ini create mode 100644 rak811.json create mode 100755 src/Commissioning.h create mode 100755 src/RAK811BreakBoard/adc-board.c create mode 100755 src/RAK811BreakBoard/adc-board.h create mode 100755 src/RAK811BreakBoard/board.c create mode 100755 src/RAK811BreakBoard/board.c~ create mode 100755 src/RAK811BreakBoard/board.h create mode 100755 src/RAK811BreakBoard/cmsis/mxconstants.h create mode 100755 src/RAK811BreakBoard/cmsis/stm32l151xb.h create mode 100755 src/RAK811BreakBoard/cmsis/stm32l151xba.h create mode 100755 src/RAK811BreakBoard/cmsis/stm32l1xx.h create mode 100755 src/RAK811BreakBoard/cmsis/stm32l1xx_hal_conf.h create mode 100755 src/RAK811BreakBoard/cmsis/system_stm32l1xx.c create mode 100755 src/RAK811BreakBoard/cmsis/system_stm32l1xx.h create mode 100755 src/RAK811BreakBoard/eeprom-board.c create mode 100755 src/RAK811BreakBoard/eeprom-board.h create mode 100755 src/RAK811BreakBoard/gpio-board.c create mode 100755 src/RAK811BreakBoard/gpio-board.h create mode 100755 src/RAK811BreakBoard/gps-board.c create mode 100755 src/RAK811BreakBoard/gps-board.h create mode 100755 src/RAK811BreakBoard/i2c-board.c create mode 100755 src/RAK811BreakBoard/i2c-board.h create mode 100755 src/RAK811BreakBoard/pinName-board.h create mode 100755 src/RAK811BreakBoard/pinName-ioe.h create mode 100755 src/RAK811BreakBoard/rtc-board.c create mode 100755 src/RAK811BreakBoard/rtc-board.h create mode 100755 src/RAK811BreakBoard/spi-board.c create mode 100755 src/RAK811BreakBoard/spi-board.h create mode 100755 src/RAK811BreakBoard/sx1276-board.c create mode 100755 src/RAK811BreakBoard/sx1276-board.h create mode 100755 src/RAK811BreakBoard/uart-board.c create mode 100755 src/RAK811BreakBoard/uart-board.h create mode 100755 src/RAK811BreakBoard/uart-usb-board.c create mode 100755 src/RAK811BreakBoard/uart-usb-board.h create mode 100755 src/boards/RAK811BreakBoard/cmsis/arm-gcc/STM32L151XBA_FLASH.ld create mode 100755 src/boards/RAK811BreakBoard/cmsis/arm-gcc/STM32L151XB_FLASH.ld create mode 100755 src/boards/mcu/stm32/RTE_Components.h create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32_assert_template.h create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal.h create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_adc.h create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_adc_ex.h create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_comp.h create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_comp_ex.h create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_conf_template.h create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_cortex.h create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_crc.h create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_cryp.h create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_cryp_ex.h create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_dac.h create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_dac_ex.h create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_def.h create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_dma.h create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_dma_ex.h create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_flash.h create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_flash_ex.h create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_flash_ramfunc.h create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_gpio.h create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_gpio_ex.h create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_i2c.h create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_i2s.h create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_irda.h create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_iwdg.h create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_lcd.h create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_nor.h create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_opamp.h create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_opamp_ex.h create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_pcd.h create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_pcd_ex.h create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_pwr.h create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_pwr_ex.h create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_rcc.h create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_rcc_ex.h create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_rtc.h create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_rtc_ex.h create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_sd.h create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_smartcard.h create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_spi.h create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_spi_ex.h create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_sram.h create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_tim.h create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_tim_ex.h create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_uart.h create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_usart.h create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_wwdg.h create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_ll_adc.h create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_ll_bus.h create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_ll_comp.h create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_ll_cortex.h create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_ll_crc.h create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_ll_dac.h create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_ll_dma.h create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_ll_exti.h create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_ll_fsmc.h create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_ll_gpio.h create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_ll_i2c.h create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_ll_iwdg.h create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_ll_opamp.h create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_ll_pwr.h create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_ll_rcc.h create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_ll_rtc.h create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_ll_sdmmc.h create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_ll_spi.h create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_ll_system.h create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_ll_tim.h create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_ll_usart.h create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_ll_utils.h create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_ll_wwdg.h create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal.c create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_adc.c create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_adc_ex.c create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_comp.c create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_cortex.c create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_crc.c create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_cryp.c create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_cryp_ex.c create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_dac.c create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_dac_ex.c create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_dma.c create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_flash.c create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_flash_ex.c create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_flash_ramfunc.c create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_gpio.c create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_i2c.c create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_i2s.c create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_irda.c create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_iwdg.c create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_lcd.c create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_msp_template.c create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_nor.c create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_opamp.c create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_opamp_ex.c create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_pcd.c create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_pcd_ex.c create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_pwr.c create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_pwr_ex.c create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_rcc.c create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_rcc_ex.c create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_rtc.c create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_rtc_ex.c create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_sd.c create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_smartcard.c create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_spi.c create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_spi_ex.c create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_sram.c create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_tim.c create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_tim_ex.c create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_uart.c create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_usart.c create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_wwdg.c create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_ll_adc.c create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_ll_comp.c create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_ll_crc.c create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_ll_dac.c create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_ll_dma.c create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_ll_exti.c create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_ll_fsmc.c create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_ll_gpio.c create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_ll_i2c.c create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_ll_opamp.c create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_ll_pwr.c create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_ll_rcc.c create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_ll_rtc.c create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_ll_sdmmc.c create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_ll_spi.c create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_ll_tim.c create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_ll_usart.c create mode 100755 src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_ll_utils.c create mode 100755 src/boards/mcu/stm32/STM32_USB_Device_Library/Class/CDC/Inc/usbd_cdc.h create mode 100755 src/boards/mcu/stm32/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.c create mode 100755 src/boards/mcu/stm32/STM32_USB_Device_Library/Class/DFU/Inc/usbd_dfu.h create mode 100755 src/boards/mcu/stm32/STM32_USB_Device_Library/Class/DFU/Src/usbd_dfu.c create mode 100755 src/boards/mcu/stm32/STM32_USB_Device_Library/Core/Inc/usbd_core.h create mode 100755 src/boards/mcu/stm32/STM32_USB_Device_Library/Core/Inc/usbd_ctlreq.h create mode 100755 src/boards/mcu/stm32/STM32_USB_Device_Library/Core/Inc/usbd_def.h create mode 100755 src/boards/mcu/stm32/STM32_USB_Device_Library/Core/Inc/usbd_ioreq.h create mode 100755 src/boards/mcu/stm32/STM32_USB_Device_Library/Core/Src/usbd_core.c create mode 100755 src/boards/mcu/stm32/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.c create mode 100755 src/boards/mcu/stm32/STM32_USB_Device_Library/Core/Src/usbd_ioreq.c create mode 100755 src/boards/mcu/stm32/cmsis/arm_common_tables.h create mode 100755 src/boards/mcu/stm32/cmsis/arm_const_structs.h create mode 100755 src/boards/mcu/stm32/cmsis/arm_math.h create mode 100755 src/boards/mcu/stm32/cmsis/cmsis_armcc.h create mode 100755 src/boards/mcu/stm32/cmsis/cmsis_armcc_V6.h create mode 100755 src/boards/mcu/stm32/cmsis/cmsis_gcc.h create mode 100755 src/boards/mcu/stm32/cmsis/core_cm0.h create mode 100755 src/boards/mcu/stm32/cmsis/core_cm0plus.h create mode 100755 src/boards/mcu/stm32/cmsis/core_cm3.h create mode 100755 src/boards/mcu/stm32/cmsis/core_cm4.h create mode 100755 src/boards/mcu/stm32/cmsis/core_cm7.h create mode 100755 src/boards/mcu/stm32/cmsis/core_cmFunc.h create mode 100755 src/boards/mcu/stm32/cmsis/core_cmInstr.h create mode 100755 src/boards/mcu/stm32/cmsis/core_cmSimd.h create mode 100755 src/boards/mcu/stm32/cmsis/core_sc000.h create mode 100755 src/boards/mcu/stm32/cmsis/core_sc300.h create mode 100755 src/boards/mcu/stm32/sysIrqHandlers.c create mode 100755 src/boards/mcu/stm32/utilities.c create mode 100755 src/boards/mcu/stm32/utilities.h create mode 100755 src/mac/LoRaMac.c create mode 100755 src/mac/LoRaMac.h create mode 100755 src/mac/LoRaMacCrypto.c create mode 100755 src/mac/LoRaMacCrypto.h create mode 100755 src/mac/LoRaMacTest.h create mode 100755 src/mac/region/Region.c create mode 100755 src/mac/region/Region.h create mode 100755 src/mac/region/RegionAS923.c create mode 100755 src/mac/region/RegionAS923.h create mode 100755 src/mac/region/RegionAU915.c create mode 100755 src/mac/region/RegionAU915.h create mode 100755 src/mac/region/RegionCN470.c create mode 100755 src/mac/region/RegionCN470.h create mode 100755 src/mac/region/RegionCN779.c create mode 100755 src/mac/region/RegionCN779.h create mode 100755 src/mac/region/RegionCommon.c create mode 100755 src/mac/region/RegionCommon.h create mode 100755 src/mac/region/RegionEU433.c create mode 100755 src/mac/region/RegionEU433.h create mode 100755 src/mac/region/RegionEU868.c create mode 100755 src/mac/region/RegionEU868.h create mode 100755 src/mac/region/RegionIN865.c create mode 100755 src/mac/region/RegionIN865.h create mode 100755 src/mac/region/RegionKR920.c create mode 100755 src/mac/region/RegionKR920.h create mode 100755 src/mac/region/RegionUS915-Hybrid.c create mode 100755 src/mac/region/RegionUS915-Hybrid.h create mode 100755 src/mac/region/RegionUS915.c create mode 100755 src/mac/region/RegionUS915.h create mode 100755 src/main.c create mode 100755 src/peripherals/gpio-ioe.c create mode 100755 src/peripherals/gpio-ioe.h create mode 100755 src/peripherals/lis3dh.c create mode 100755 src/peripherals/lis3dh.h create mode 100755 src/peripherals/lis3dh.h~RF65283d0.TMP create mode 100755 src/peripherals/mag3110.c create mode 100755 src/peripherals/mag3110.h create mode 100755 src/peripherals/mma8451.c create mode 100755 src/peripherals/mma8451.h create mode 100755 src/peripherals/mpl3115.c create mode 100755 src/peripherals/mpl3115.h create mode 100755 src/peripherals/pam7q.c create mode 100755 src/peripherals/pam7q.h create mode 100755 src/peripherals/selector.c create mode 100755 src/peripherals/selector.h create mode 100755 src/peripherals/sx1509.c create mode 100755 src/peripherals/sx1509.h create mode 100755 src/peripherals/sx9500.c create mode 100755 src/peripherals/sx9500.h create mode 100755 src/stm32l0xx.h create mode 100755 src/stm32l0xx_hal_conf.h create mode 100755 src/usb/cdc/inc/usbd_cdc_if.h create mode 100755 src/usb/cdc/inc/usbd_conf.h create mode 100755 src/usb/cdc/inc/usbd_desc.h create mode 100755 src/usb/cdc/src/usbd_cdc_if.c create mode 100755 src/usb/cdc/src/usbd_conf.c create mode 100755 src/usb/cdc/src/usbd_desc.c create mode 100755 src/usb/dfu/inc/usbd_conf.h create mode 100755 src/usb/dfu/inc/usbd_desc.h create mode 100755 src/usb/dfu/inc/usbd_dfu_flash.h create mode 100755 src/usb/dfu/src/usbd_conf.c create mode 100755 src/usb/dfu/src/usbd_desc.c create mode 100755 src/usb/dfu/src/usbd_dfu_flash.c create mode 100644 stm32flash_src/AUTHORS create mode 100644 stm32flash_src/Android.mk create mode 100644 stm32flash_src/HOWTO create mode 100644 stm32flash_src/I2C.txt create mode 100644 stm32flash_src/INSTALL create mode 100644 stm32flash_src/Makefile create mode 100644 stm32flash_src/README.md create mode 100644 stm32flash_src/TODO create mode 100644 stm32flash_src/dev_table.c create mode 100644 stm32flash_src/file.flash create mode 100755 stm32flash_src/firmware.bin create mode 100644 stm32flash_src/gpl-2.0.txt create mode 100644 stm32flash_src/i2c.c create mode 100644 stm32flash_src/init.c create mode 100644 stm32flash_src/init.h create mode 100644 stm32flash_src/main.c create mode 100644 stm32flash_src/parsers/Android.mk create mode 100644 stm32flash_src/parsers/Makefile create mode 100644 stm32flash_src/parsers/binary.c create mode 100644 stm32flash_src/parsers/binary.h create mode 100644 stm32flash_src/parsers/hex.c create mode 100644 stm32flash_src/parsers/hex.h create mode 100644 stm32flash_src/parsers/parser.h create mode 100644 stm32flash_src/port.c create mode 100644 stm32flash_src/port.h create mode 100644 stm32flash_src/protocol.txt create mode 100644 stm32flash_src/serial.h create mode 100644 stm32flash_src/serial_common.c create mode 100644 stm32flash_src/serial_platform.c create mode 100644 stm32flash_src/serial_posix.c create mode 100644 stm32flash_src/serial_w32.c create mode 100644 stm32flash_src/stm32.c create mode 100644 stm32flash_src/stm32.h create mode 100644 stm32flash_src/stm32flash.1 create mode 100644 stm32flash_src/utils.c create mode 100644 stm32flash_src/utils.h diff --git a/README.md b/README.md new file mode 100644 index 0000000..663492b --- /dev/null +++ b/README.md @@ -0,0 +1,39 @@ +# RAK811 breakout board + +Code from here and tried to adapt to platformio +https://github.com/Ebiroll/RAK811_BreakBoard.git + +It compiles and flashes but when I got blinky to run +the speed was way to low, + +# Add new board definition +Edit rak811.json as the linker script is an absolute path. +cp rak811.json .platformio/platforms/ststm32/boards/rak811.json + + +# compile +pio run + + +# To flash firmware with stm32flash +In stm32flash_src there is code to flash the device + ./stm32flash -w .pioenvs/rak811/firmware.bin /dev/ttyUSB0 + +# Start +It does not apear to tun correctly. :-( +in src/main there is also a blinky main that can be used for debugging. +I was able to run it once, then I made some change that made it unusable + + +# Startup code +The startup code should have been these, +https://github.com/RAKWireless/RAK811_BreakBoard/tree/master/src/boards/RAK811BreakBoard/cmsis/arm-gcc + +boards/RAK811BreakBoard/cmsis/startup_stm32l151xb.s + +But instead +.platformio/packages/framework-cmsis/variants/stm32l1/stm32l151xba/startup_stm32l151xba.S +is used, + +Only difference is + /*bl __libc_init_array*/ /* PlatformIO note: Will work without -nostartfiles */ \ No newline at end of file diff --git a/STM32L151XBA_FLASH.ld b/STM32L151XBA_FLASH.ld new file mode 100755 index 0000000..dd3602b --- /dev/null +++ b/STM32L151XBA_FLASH.ld @@ -0,0 +1,166 @@ +/* +***************************************************************************** +** +** File : STM32L151XBA_FLASH.ld +** +** Abstract : Linker script for STM32L151XBA Device with +** 128KByte FLASH, 32KByte RAM +** +** Set heap size, stack size and stack location according +** to application requirements. +** +** Set memory bank area and size if external memory is used. +** +** Target : STMicroelectronics STM32 +** +** Environment : Atollic TrueSTUDIO(R) +** +** Distribution: The file is distributed “as is,” without any warranty +** of any kind. +** +** (c)Copyright Atollic AB. +** You may use this file as-is or modify it according to the needs of your +** project. This file may only be built (assembled or compiled and linked) +** using the Atollic TrueSTUDIO(R) product. The use of this file together +** with other tools than Atollic TrueSTUDIO(R) is not permitted. +** +***************************************************************************** +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = 0x20007FFF; /* end of RAM */ + +/* Generate a link error if heap and stack don't fit into RAM */ +_Min_Heap_Size = 0x200; /* required amount of heap */ +_Min_Stack_Size = 0x400; /* required amount of stack */ + +/* Specify the memory areas */ +MEMORY +{ +FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 128K +RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 32K +} + +/* Define output sections */ +SECTIONS +{ + /* The startup code goes first into FLASH */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >FLASH + + /* The program code and other data goes into FLASH */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + /* Constant data goes into FLASH */ + .rodata : + { + . = ALIGN(4); + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + . = ALIGN(4); + } >FLASH + + .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH + .ARM : { + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + } >FLASH + + .preinit_array : + { + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + } >FLASH + .init_array : + { + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + } >FLASH + .fini_array : + { + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + } >FLASH + + /* used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections goes into RAM, load LMA copy after code */ + .data : + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + } >RAM AT> FLASH + + + /* Uninitialized data section */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss secion */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + /* User_heap_stack section, used to check that there is enough RAM left */ + ._user_heap_stack : + { + . = ALIGN(4); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(4); + } >RAM + + + + /* Remove information from the standard libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} diff --git a/lib/Retarget_printf/src/printf.c b/lib/Retarget_printf/src/printf.c new file mode 100755 index 0000000..88d0504 --- /dev/null +++ b/lib/Retarget_printf/src/printf.c @@ -0,0 +1,571 @@ +/**************************************************************************//***** + * @file printf.c + * @brief Implementation of several stdio.h methods, such as printf(), + * sprintf() and so on. This reduces the memory footprint of the + * binary when using those methods, compared to the libc implementation. + ********************************************************************************/ +#include +#include +#include +/** @addtogroup RetargetPrintf + * @{ + */ + +/** @addtogroup printf + * @{ + */ + +/** + * @brief Transmit a char, if you want to use printf(), + * you need implement this function + * + * @param pStr Storage string. + * @param c Character to write. + */ +extern int e_printchar(char ch); +__attribute__ ((weak)) void PrintChar(char c) +{ + /* Send a char like: + while(Transfer not completed); + Transmit a char; + */ + e_printchar(c); +} + +/** Maximum string size allowed (in bytes). */ +#define MAX_STRING_SIZE 100 + + +/** Required for proper compilation. */ +struct _reent r = {0, (FILE *) 0, (FILE *) 1, (FILE *) 0}; +//struct _reent *_impure_ptr = &r; + +/** + * @brief Writes a character inside the given string. Returns 1. + * + * @param pStr Storage string. + * @param c Character to write. + */ +signed int PutChar(char *pStr, char c) +{ + *pStr = c; + return 1; +} + + +/** + * @brief Writes a string inside the given string. + * + * @param pStr Storage string. + * @param pSource Source string. + * @return The size of the written + */ +signed int PutString(char *pStr, const char *pSource) +{ + signed int num = 0; + + while (*pSource != 0) { + + *pStr++ = *pSource++; + num++; + } + + return num; +} + + +/** + * @brief Writes an unsigned int inside the given string, using the provided fill & + * width parameters. + * + * @param pStr Storage string. + * @param fill Fill character. + * @param width Minimum integer width. + * @param value Integer value. + */ +signed int PutUnsignedInt( + char *pStr, + char fill, + signed int width, + unsigned int value) +{ + signed int num = 0; + + /* Take current digit into account when calculating width */ + width--; + + /* Recursively write upper digits */ + if ((value / 10) > 0) { + + num = PutUnsignedInt(pStr, fill, width, value / 10); + pStr += num; + } + + /* Write filler characters */ + else { + + while (width > 0) { + + PutChar(pStr, fill); + pStr++; + num++; + width--; + } + } + + /* Write lower digit */ + num += PutChar(pStr, (value % 10) + '0'); + + return num; +} + + +/** + * @brief Writes a signed int inside the given string, using the provided fill & width + * parameters. + * + * @param pStr Storage string. + * @param fill Fill character. + * @param width Minimum integer width. + * @param value Signed integer value. + */ +signed int PutSignedInt( + char *pStr, + char fill, + signed int width, + signed int value) +{ + signed int num = 0; + unsigned int absolute; + + /* Compute absolute value */ + if (value < 0) { + + absolute = -value; + } + else { + + absolute = value; + } + + /* Take current digit into account when calculating width */ + width--; + + /* Recursively write upper digits */ + if ((absolute / 10) > 0) { + + if (value < 0) { + + num = PutSignedInt(pStr, fill, width, -(absolute / 10)); + } + else { + + num = PutSignedInt(pStr, fill, width, absolute / 10); + } + pStr += num; + } + else { + + /* Reserve space for sign */ + if (value < 0) { + + width--; + } + + /* Write filler characters */ + while (width > 0) { + + PutChar(pStr, fill); + pStr++; + num++; + width--; + } + + /* Write sign */ + if (value < 0) { + + num += PutChar(pStr, '-'); + pStr++; + } + } + + /* Write lower digit */ + num += PutChar(pStr, (absolute % 10) + '0'); + + return num; +} + + +/** + * @brief Writes an hexadecimal value into a string, using the given fill, width & + * capital parameters. + * + * @param pStr Storage string. + * @param fill Fill character. + * @param width Minimum integer width. + * @param maj Indicates if the letters must be printed in lower- or upper-case. + * @param value Hexadecimal value. + * + * @return The number of char written + */ +signed int PutHexa( + char *pStr, + char fill, + signed int width, + unsigned char maj, + unsigned int value) +{ + signed int num = 0; + + /* Decrement width */ + width--; + + /* Recursively output upper digits */ + if ((value >> 4) > 0) { + + num += PutHexa(pStr, fill, width, maj, value >> 4); + pStr += num; + } + /* Write filler chars */ + else { + + while (width > 0) { + + PutChar(pStr, fill); + pStr++; + num++; + width--; + } + } + + /* Write current digit */ + if ((value & 0xF) < 10) { + + PutChar(pStr, (value & 0xF) + '0'); + } + else if (maj) { + + PutChar(pStr, (value & 0xF) - 10 + 'A'); + } + else { + + PutChar(pStr, (value & 0xF) - 10 + 'a'); + } + num++; + + return num; +} + + + +/* Global Functions ----------------------------------------------------------- */ + + +/** + * @brief Stores the result of a formatted string into another string. Format + * arguments are given in a va_list instance. + * + * @param pStr Destination string. + * @param length Length of Destination string. + * @param pFormat Format string. + * @param ap Argument list. + * + * @return The number of characters written. + */ +signed int vsnprintf(char *pStr, size_t length, const char *pFormat, va_list ap) +{ + char fill; + unsigned char width; + signed int num = 0; + signed int size = 0; + + /* Clear the string */ + if (pStr) { + + *pStr = 0; + } + + /* Phase string */ + while (*pFormat != 0 && size < length) { + + /* Normal character */ + if (*pFormat != '%') { + + *pStr++ = *pFormat++; + size++; + } + /* Escaped '%' */ + else if (*(pFormat+1) == '%') { + + *pStr++ = '%'; + pFormat += 2; + size++; + } + /* Token delimiter */ + else { + + fill = ' '; + width = 0; + pFormat++; + + /* Parse filler */ + if (*pFormat == '0') { + + fill = '0'; + pFormat++; + } + + /* Parse width */ + while ((*pFormat >= '0') && (*pFormat <= '9')) { + + width = (width*10) + *pFormat-'0'; + pFormat++; + } + + /* Check if there is enough space */ + if (size + width > length) { + + width = length - size; + } + + /* Parse type */ + switch (*pFormat) { + case 'd': + case 'i': num = PutSignedInt(pStr, fill, width, va_arg(ap, signed int)); break; + case 'u': num = PutUnsignedInt(pStr, fill, width, va_arg(ap, unsigned int)); break; + case 'x': num = PutHexa(pStr, fill, width, 0, va_arg(ap, unsigned int)); break; + case 'X': num = PutHexa(pStr, fill, width, 1, va_arg(ap, unsigned int)); break; + case 's': num = PutString(pStr, va_arg(ap, char *)); break; + case 'c': num = PutChar(pStr, va_arg(ap, unsigned int)); break; + default: + return EOF; + } + + pFormat++; + pStr += num; + size += num; + } + } + + /* NULL-terminated (final \0 is not counted) */ + if (size < length) { + + *pStr = 0; + } + else { + + *(--pStr) = 0; + size--; + } + + return size; +} + + +/** + * @brief Stores the result of a formatted string into another string. Format + * arguments are given in a va_list instance. + * + * @param pStr Destination string. + * @param length Length of Destination string. + * @param pFormat Format string. + * @param ... Other arguments + * + * @return The number of characters written. + */ +signed int snprintf(char *pString, size_t length, const char *pFormat, ...) +{ + va_list ap; + signed int rc; + + va_start(ap, pFormat); + rc = vsnprintf(pString, length, pFormat, ap); + va_end(ap); + + return rc; +} + + +/** + * @brief Stores the result of a formatted string into another string. Format + * arguments are given in a va_list instance. + * + * @param pString Destination string. + * @param length Length of Destination string. + * @param pFormat Format string. + * @param ap Argument list. + * + * @return The number of characters written. + */ +signed int vsprintf(char *pString, const char *pFormat, va_list ap) +{ + return vsnprintf(pString, MAX_STRING_SIZE, pFormat, ap); +} + +/** + * @brief Outputs a formatted string on the given stream. Format arguments are given + * in a va_list instance. + * + * @param pStream Output stream. + * @param pFormat Format string + * @param ap Argument list. + */ +signed int vfprintf(FILE *pStream, const char *pFormat, va_list ap) +{ + char pStr[MAX_STRING_SIZE]; + char pError[] = "stdio.c: increase MAX_STRING_SIZE\n\r"; + + /* Write formatted string in buffer */ + if (vsprintf(pStr, pFormat, ap) >= MAX_STRING_SIZE) { + + fputs(pError, stderr); + while (1); /* Increase MAX_STRING_SIZE */ + } + + /* Display string */ + return fputs(pStr, pStream); +} + + +/** + * @brief Outputs a formatted string on the DBGU stream. Format arguments are given + * in a va_list instance. + * + * @param pFormat Format string. + * @param ap Argument list. + */ +signed int vprintf(const char *pFormat, va_list ap) +{ + return vfprintf(stdout, pFormat, ap); +} + + +/** + * @brief Outputs a formatted string on the given stream, using a variable + * number of arguments. + * + * @param pStream Output stream. + * @param pFormat Format string. + */ +signed int fprintf(FILE *pStream, const char *pFormat, ...) +{ + va_list ap; + signed int result; + + /* Forward call to vfprintf */ + va_start(ap, pFormat); + result = vfprintf(pStream, pFormat, ap); + va_end(ap); + + return result; +} + + +/** + * @brief Outputs a formatted string on the DBGU stream, using a variable number of + * arguments. + * + * @param pFormat Format string. + */ +signed int printf(const char *pFormat, ...) +{ + va_list ap; + signed int result; + + /* Forward call to vprintf */ + va_start(ap, pFormat); + result = vprintf(pFormat, ap); + va_end(ap); + + return result; +} + + +/** + * @brief Writes a formatted string inside another string. + * + * @param pStr torage string. + * @param pFormat Format string. + */ +signed int sprintf(char *pStr, const char *pFormat, ...) +{ + va_list ap; + signed int result; + + // Forward call to vsprintf + va_start(ap, pFormat); + result = vsprintf(pStr, pFormat, ap); + va_end(ap); + + return result; +} + + +/** + * @brief Outputs a string on stdout. + * + * @param pStr String to output. + */ +signed int puts(const char *pStr) +{ + return fputs(pStr, stdout); +} + + +/** + * @brief Implementation of fputc using the DBGU as the standard output. Required + * for printf(). + * + * @param c Character to write. + * @param pStream Output stream. + * @param The character written if successful, or -1 if the output stream is + * not stdout or stderr. + */ +signed int fputc(signed int c, FILE *pStream) +{ + if ((pStream == stdout) || (pStream == stderr)) { + + PrintChar(c); + + return c; + } + else { + + return EOF; + } +} + + +/** + * @brief Implementation of fputs using the DBGU as the standard output. Required + * for printf(). + * + * @param pStr String to write. + * @param pStream Output stream. + * + * @return Number of characters written if successful, or -1 if the output + * stream is not stdout or stderr. + */ +signed int fputs(const char *pStr, FILE *pStream) +{ + signed int num = 0; + + while (*pStr != 0) { + + if (fputc(*pStr, pStream) == -1) { + + return -1; + } + num++; + pStr++; + } + + return num; +} +/** + * @} + */ +/** + * @} + */ +/* --------------------------------- End Of File ------------------------------ */ diff --git a/lib/crypto/aes.c b/lib/crypto/aes.c new file mode 100755 index 0000000..eb0551f --- /dev/null +++ b/lib/crypto/aes.c @@ -0,0 +1,936 @@ +/* + --------------------------------------------------------------------------- + Copyright (c) 1998-2008, Brian Gladman, Worcester, UK. All rights reserved. + + LICENSE TERMS + + The redistribution and use of this software (with or without changes) + is allowed without the payment of fees or royalties provided that: + + 1. source code distributions include the above copyright notice, this + list of conditions and the following disclaimer; + + 2. binary distributions include the above copyright notice, this list + of conditions and the following disclaimer in their documentation; + + 3. the name of the copyright holder is not used to endorse products + built using this software without specific written permission. + + DISCLAIMER + + This software is provided 'as is' with no explicit or implied warranties + in respect of its properties, including, but not limited to, correctness + and/or fitness for purpose. + --------------------------------------------------------------------------- + Issue 09/09/2006 + + This is an AES implementation that uses only 8-bit byte operations on the + cipher state (there are options to use 32-bit types if available). + + The combination of mix columns and byte substitution used here is based on + that developed by Karl Malbrain. His contribution is acknowledged. + */ + +/* define if you have a fast memcpy function on your system */ +#if 0 +# define HAVE_MEMCPY +# include +# if defined( _MSC_VER ) +# include +# pragma intrinsic( memcpy ) +# endif +#endif + + +#include +#include + +/* define if you have fast 32-bit types on your system */ +#if ( __CORTEX_M != 0 ) // if Cortex is different from M0/M0+ +# define HAVE_UINT_32T +#endif + +/* define if you don't want any tables */ +#if 1 +# define USE_TABLES +#endif + +/* On Intel Core 2 duo VERSION_1 is faster */ + +/* alternative versions (test for performance on your system) */ +#if 1 +# define VERSION_1 +#endif + +#include "aes.h" + +//#if defined( HAVE_UINT_32T ) +// typedef unsigned long uint32_t; +//#endif + +/* functions for finite field multiplication in the AES Galois field */ + +#define WPOLY 0x011b +#define BPOLY 0x1b +#define DPOLY 0x008d + +#define f1(x) (x) +#define f2(x) ((x << 1) ^ (((x >> 7) & 1) * WPOLY)) +#define f4(x) ((x << 2) ^ (((x >> 6) & 1) * WPOLY) ^ (((x >> 6) & 2) * WPOLY)) +#define f8(x) ((x << 3) ^ (((x >> 5) & 1) * WPOLY) ^ (((x >> 5) & 2) * WPOLY) \ + ^ (((x >> 5) & 4) * WPOLY)) +#define d2(x) (((x) >> 1) ^ ((x) & 1 ? DPOLY : 0)) + +#define f3(x) (f2(x) ^ x) +#define f9(x) (f8(x) ^ x) +#define fb(x) (f8(x) ^ f2(x) ^ x) +#define fd(x) (f8(x) ^ f4(x) ^ x) +#define fe(x) (f8(x) ^ f4(x) ^ f2(x)) + +#if defined( USE_TABLES ) + +#define sb_data(w) { /* S Box data values */ \ + w(0x63), w(0x7c), w(0x77), w(0x7b), w(0xf2), w(0x6b), w(0x6f), w(0xc5),\ + w(0x30), w(0x01), w(0x67), w(0x2b), w(0xfe), w(0xd7), w(0xab), w(0x76),\ + w(0xca), w(0x82), w(0xc9), w(0x7d), w(0xfa), w(0x59), w(0x47), w(0xf0),\ + w(0xad), w(0xd4), w(0xa2), w(0xaf), w(0x9c), w(0xa4), w(0x72), w(0xc0),\ + w(0xb7), w(0xfd), w(0x93), w(0x26), w(0x36), w(0x3f), w(0xf7), w(0xcc),\ + w(0x34), w(0xa5), w(0xe5), w(0xf1), w(0x71), w(0xd8), w(0x31), w(0x15),\ + w(0x04), w(0xc7), w(0x23), w(0xc3), w(0x18), w(0x96), w(0x05), w(0x9a),\ + w(0x07), w(0x12), w(0x80), w(0xe2), w(0xeb), w(0x27), w(0xb2), w(0x75),\ + w(0x09), w(0x83), w(0x2c), w(0x1a), w(0x1b), w(0x6e), w(0x5a), w(0xa0),\ + w(0x52), w(0x3b), w(0xd6), w(0xb3), w(0x29), w(0xe3), w(0x2f), w(0x84),\ + w(0x53), w(0xd1), w(0x00), w(0xed), w(0x20), w(0xfc), w(0xb1), w(0x5b),\ + w(0x6a), w(0xcb), w(0xbe), w(0x39), w(0x4a), w(0x4c), w(0x58), w(0xcf),\ + w(0xd0), w(0xef), w(0xaa), w(0xfb), w(0x43), w(0x4d), w(0x33), w(0x85),\ + w(0x45), w(0xf9), w(0x02), w(0x7f), w(0x50), w(0x3c), w(0x9f), w(0xa8),\ + w(0x51), w(0xa3), w(0x40), w(0x8f), w(0x92), w(0x9d), w(0x38), w(0xf5),\ + w(0xbc), w(0xb6), w(0xda), w(0x21), w(0x10), w(0xff), w(0xf3), w(0xd2),\ + w(0xcd), w(0x0c), w(0x13), w(0xec), w(0x5f), w(0x97), w(0x44), w(0x17),\ + w(0xc4), w(0xa7), w(0x7e), w(0x3d), w(0x64), w(0x5d), w(0x19), w(0x73),\ + w(0x60), w(0x81), w(0x4f), w(0xdc), w(0x22), w(0x2a), w(0x90), w(0x88),\ + w(0x46), w(0xee), w(0xb8), w(0x14), w(0xde), w(0x5e), w(0x0b), w(0xdb),\ + w(0xe0), w(0x32), w(0x3a), w(0x0a), w(0x49), w(0x06), w(0x24), w(0x5c),\ + w(0xc2), w(0xd3), w(0xac), w(0x62), w(0x91), w(0x95), w(0xe4), w(0x79),\ + w(0xe7), w(0xc8), w(0x37), w(0x6d), w(0x8d), w(0xd5), w(0x4e), w(0xa9),\ + w(0x6c), w(0x56), w(0xf4), w(0xea), w(0x65), w(0x7a), w(0xae), w(0x08),\ + w(0xba), w(0x78), w(0x25), w(0x2e), w(0x1c), w(0xa6), w(0xb4), w(0xc6),\ + w(0xe8), w(0xdd), w(0x74), w(0x1f), w(0x4b), w(0xbd), w(0x8b), w(0x8a),\ + w(0x70), w(0x3e), w(0xb5), w(0x66), w(0x48), w(0x03), w(0xf6), w(0x0e),\ + w(0x61), w(0x35), w(0x57), w(0xb9), w(0x86), w(0xc1), w(0x1d), w(0x9e),\ + w(0xe1), w(0xf8), w(0x98), w(0x11), w(0x69), w(0xd9), w(0x8e), w(0x94),\ + w(0x9b), w(0x1e), w(0x87), w(0xe9), w(0xce), w(0x55), w(0x28), w(0xdf),\ + w(0x8c), w(0xa1), w(0x89), w(0x0d), w(0xbf), w(0xe6), w(0x42), w(0x68),\ + w(0x41), w(0x99), w(0x2d), w(0x0f), w(0xb0), w(0x54), w(0xbb), w(0x16) } + +#define isb_data(w) { /* inverse S Box data values */ \ + w(0x52), w(0x09), w(0x6a), w(0xd5), w(0x30), w(0x36), w(0xa5), w(0x38),\ + w(0xbf), w(0x40), w(0xa3), w(0x9e), w(0x81), w(0xf3), w(0xd7), w(0xfb),\ + w(0x7c), w(0xe3), w(0x39), w(0x82), w(0x9b), w(0x2f), w(0xff), w(0x87),\ + w(0x34), w(0x8e), w(0x43), w(0x44), w(0xc4), w(0xde), w(0xe9), w(0xcb),\ + w(0x54), w(0x7b), w(0x94), w(0x32), w(0xa6), w(0xc2), w(0x23), w(0x3d),\ + w(0xee), w(0x4c), w(0x95), w(0x0b), w(0x42), w(0xfa), w(0xc3), w(0x4e),\ + w(0x08), w(0x2e), w(0xa1), w(0x66), w(0x28), w(0xd9), w(0x24), w(0xb2),\ + w(0x76), w(0x5b), w(0xa2), w(0x49), w(0x6d), w(0x8b), w(0xd1), w(0x25),\ + w(0x72), w(0xf8), w(0xf6), w(0x64), w(0x86), w(0x68), w(0x98), w(0x16),\ + w(0xd4), w(0xa4), w(0x5c), w(0xcc), w(0x5d), w(0x65), w(0xb6), w(0x92),\ + w(0x6c), w(0x70), w(0x48), w(0x50), w(0xfd), w(0xed), w(0xb9), w(0xda),\ + w(0x5e), w(0x15), w(0x46), w(0x57), w(0xa7), w(0x8d), w(0x9d), w(0x84),\ + w(0x90), w(0xd8), w(0xab), w(0x00), w(0x8c), w(0xbc), w(0xd3), w(0x0a),\ + w(0xf7), w(0xe4), w(0x58), w(0x05), w(0xb8), w(0xb3), w(0x45), w(0x06),\ + w(0xd0), w(0x2c), w(0x1e), w(0x8f), w(0xca), w(0x3f), w(0x0f), w(0x02),\ + w(0xc1), w(0xaf), w(0xbd), w(0x03), w(0x01), w(0x13), w(0x8a), w(0x6b),\ + w(0x3a), w(0x91), w(0x11), w(0x41), w(0x4f), w(0x67), w(0xdc), w(0xea),\ + w(0x97), w(0xf2), w(0xcf), w(0xce), w(0xf0), w(0xb4), w(0xe6), w(0x73),\ + w(0x96), w(0xac), w(0x74), w(0x22), w(0xe7), w(0xad), w(0x35), w(0x85),\ + w(0xe2), w(0xf9), w(0x37), w(0xe8), w(0x1c), w(0x75), w(0xdf), w(0x6e),\ + w(0x47), w(0xf1), w(0x1a), w(0x71), w(0x1d), w(0x29), w(0xc5), w(0x89),\ + w(0x6f), w(0xb7), w(0x62), w(0x0e), w(0xaa), w(0x18), w(0xbe), w(0x1b),\ + w(0xfc), w(0x56), w(0x3e), w(0x4b), w(0xc6), w(0xd2), w(0x79), w(0x20),\ + w(0x9a), w(0xdb), w(0xc0), w(0xfe), w(0x78), w(0xcd), w(0x5a), w(0xf4),\ + w(0x1f), w(0xdd), w(0xa8), w(0x33), w(0x88), w(0x07), w(0xc7), w(0x31),\ + w(0xb1), w(0x12), w(0x10), w(0x59), w(0x27), w(0x80), w(0xec), w(0x5f),\ + w(0x60), w(0x51), w(0x7f), w(0xa9), w(0x19), w(0xb5), w(0x4a), w(0x0d),\ + w(0x2d), w(0xe5), w(0x7a), w(0x9f), w(0x93), w(0xc9), w(0x9c), w(0xef),\ + w(0xa0), w(0xe0), w(0x3b), w(0x4d), w(0xae), w(0x2a), w(0xf5), w(0xb0),\ + w(0xc8), w(0xeb), w(0xbb), w(0x3c), w(0x83), w(0x53), w(0x99), w(0x61),\ + w(0x17), w(0x2b), w(0x04), w(0x7e), w(0xba), w(0x77), w(0xd6), w(0x26),\ + w(0xe1), w(0x69), w(0x14), w(0x63), w(0x55), w(0x21), w(0x0c), w(0x7d) } + +#define mm_data(w) { /* basic data for forming finite field tables */ \ + w(0x00), w(0x01), w(0x02), w(0x03), w(0x04), w(0x05), w(0x06), w(0x07),\ + w(0x08), w(0x09), w(0x0a), w(0x0b), w(0x0c), w(0x0d), w(0x0e), w(0x0f),\ + w(0x10), w(0x11), w(0x12), w(0x13), w(0x14), w(0x15), w(0x16), w(0x17),\ + w(0x18), w(0x19), w(0x1a), w(0x1b), w(0x1c), w(0x1d), w(0x1e), w(0x1f),\ + w(0x20), w(0x21), w(0x22), w(0x23), w(0x24), w(0x25), w(0x26), w(0x27),\ + w(0x28), w(0x29), w(0x2a), w(0x2b), w(0x2c), w(0x2d), w(0x2e), w(0x2f),\ + w(0x30), w(0x31), w(0x32), w(0x33), w(0x34), w(0x35), w(0x36), w(0x37),\ + w(0x38), w(0x39), w(0x3a), w(0x3b), w(0x3c), w(0x3d), w(0x3e), w(0x3f),\ + w(0x40), w(0x41), w(0x42), w(0x43), w(0x44), w(0x45), w(0x46), w(0x47),\ + w(0x48), w(0x49), w(0x4a), w(0x4b), w(0x4c), w(0x4d), w(0x4e), w(0x4f),\ + w(0x50), w(0x51), w(0x52), w(0x53), w(0x54), w(0x55), w(0x56), w(0x57),\ + w(0x58), w(0x59), w(0x5a), w(0x5b), w(0x5c), w(0x5d), w(0x5e), w(0x5f),\ + w(0x60), w(0x61), w(0x62), w(0x63), w(0x64), w(0x65), w(0x66), w(0x67),\ + w(0x68), w(0x69), w(0x6a), w(0x6b), w(0x6c), w(0x6d), w(0x6e), w(0x6f),\ + w(0x70), w(0x71), w(0x72), w(0x73), w(0x74), w(0x75), w(0x76), w(0x77),\ + w(0x78), w(0x79), w(0x7a), w(0x7b), w(0x7c), w(0x7d), w(0x7e), w(0x7f),\ + w(0x80), w(0x81), w(0x82), w(0x83), w(0x84), w(0x85), w(0x86), w(0x87),\ + w(0x88), w(0x89), w(0x8a), w(0x8b), w(0x8c), w(0x8d), w(0x8e), w(0x8f),\ + w(0x90), w(0x91), w(0x92), w(0x93), w(0x94), w(0x95), w(0x96), w(0x97),\ + w(0x98), w(0x99), w(0x9a), w(0x9b), w(0x9c), w(0x9d), w(0x9e), w(0x9f),\ + w(0xa0), w(0xa1), w(0xa2), w(0xa3), w(0xa4), w(0xa5), w(0xa6), w(0xa7),\ + w(0xa8), w(0xa9), w(0xaa), w(0xab), w(0xac), w(0xad), w(0xae), w(0xaf),\ + w(0xb0), w(0xb1), w(0xb2), w(0xb3), w(0xb4), w(0xb5), w(0xb6), w(0xb7),\ + w(0xb8), w(0xb9), w(0xba), w(0xbb), w(0xbc), w(0xbd), w(0xbe), w(0xbf),\ + w(0xc0), w(0xc1), w(0xc2), w(0xc3), w(0xc4), w(0xc5), w(0xc6), w(0xc7),\ + w(0xc8), w(0xc9), w(0xca), w(0xcb), w(0xcc), w(0xcd), w(0xce), w(0xcf),\ + w(0xd0), w(0xd1), w(0xd2), w(0xd3), w(0xd4), w(0xd5), w(0xd6), w(0xd7),\ + w(0xd8), w(0xd9), w(0xda), w(0xdb), w(0xdc), w(0xdd), w(0xde), w(0xdf),\ + w(0xe0), w(0xe1), w(0xe2), w(0xe3), w(0xe4), w(0xe5), w(0xe6), w(0xe7),\ + w(0xe8), w(0xe9), w(0xea), w(0xeb), w(0xec), w(0xed), w(0xee), w(0xef),\ + w(0xf0), w(0xf1), w(0xf2), w(0xf3), w(0xf4), w(0xf5), w(0xf6), w(0xf7),\ + w(0xf8), w(0xf9), w(0xfa), w(0xfb), w(0xfc), w(0xfd), w(0xfe), w(0xff) } + +static const uint8_t sbox[256] = sb_data(f1); + +#if defined( AES_DEC_PREKEYED ) +static const uint8_t isbox[256] = isb_data(f1); +#endif + +static const uint8_t gfm2_sbox[256] = sb_data(f2); +static const uint8_t gfm3_sbox[256] = sb_data(f3); + +#if defined( AES_DEC_PREKEYED ) +static const uint8_t gfmul_9[256] = mm_data(f9); +static const uint8_t gfmul_b[256] = mm_data(fb); +static const uint8_t gfmul_d[256] = mm_data(fd); +static const uint8_t gfmul_e[256] = mm_data(fe); +#endif + +#define s_box(x) sbox[(x)] +#if defined( AES_DEC_PREKEYED ) +#define is_box(x) isbox[(x)] +#endif +#define gfm2_sb(x) gfm2_sbox[(x)] +#define gfm3_sb(x) gfm3_sbox[(x)] +#if defined( AES_DEC_PREKEYED ) +#define gfm_9(x) gfmul_9[(x)] +#define gfm_b(x) gfmul_b[(x)] +#define gfm_d(x) gfmul_d[(x)] +#define gfm_e(x) gfmul_e[(x)] +#endif +#else + +/* this is the high bit of x right shifted by 1 */ +/* position. Since the starting polynomial has */ +/* 9 bits (0x11b), this right shift keeps the */ +/* values of all top bits within a byte */ + +static uint8_t hibit(const uint8_t x) +{ uint8_t r = (uint8_t)((x >> 1) | (x >> 2)); + + r |= (r >> 2); + r |= (r >> 4); + return (r + 1) >> 1; +} + +/* return the inverse of the finite field element x */ + +static uint8_t gf_inv(const uint8_t x) +{ uint8_t p1 = x, p2 = BPOLY, n1 = hibit(x), n2 = 0x80, v1 = 1, v2 = 0; + + if(x < 2) + return x; + + for( ; ; ) + { + if(n1) + while(n2 >= n1) /* divide polynomial p2 by p1 */ + { + n2 /= n1; /* shift smaller polynomial left */ + p2 ^= (p1 * n2) & 0xff; /* and remove from larger one */ + v2 ^= (v1 * n2); /* shift accumulated value and */ + n2 = hibit(p2); /* add into result */ + } + else + return v1; + + if(n2) /* repeat with values swapped */ + while(n1 >= n2) + { + n1 /= n2; + p1 ^= p2 * n1; + v1 ^= v2 * n1; + n1 = hibit(p1); + } + else + return v2; + } +} + +/* The forward and inverse affine transformations used in the S-box */ +uint8_t fwd_affine(const uint8_t x) +{ +#if defined( HAVE_UINT_32T ) + uint32_t w = x; + w ^= (w << 1) ^ (w << 2) ^ (w << 3) ^ (w << 4); + return 0x63 ^ ((w ^ (w >> 8)) & 0xff); +#else + return 0x63 ^ x ^ (x << 1) ^ (x << 2) ^ (x << 3) ^ (x << 4) + ^ (x >> 7) ^ (x >> 6) ^ (x >> 5) ^ (x >> 4); +#endif +} + +uint8_t inv_affine(const uint8_t x) +{ +#if defined( HAVE_UINT_32T ) + uint32_t w = x; + w = (w << 1) ^ (w << 3) ^ (w << 6); + return 0x05 ^ ((w ^ (w >> 8)) & 0xff); +#else + return 0x05 ^ (x << 1) ^ (x << 3) ^ (x << 6) + ^ (x >> 7) ^ (x >> 5) ^ (x >> 2); +#endif +} + +#define s_box(x) fwd_affine(gf_inv(x)) +#define is_box(x) gf_inv(inv_affine(x)) +#define gfm2_sb(x) f2(s_box(x)) +#define gfm3_sb(x) f3(s_box(x)) +#define gfm_9(x) f9(x) +#define gfm_b(x) fb(x) +#define gfm_d(x) fd(x) +#define gfm_e(x) fe(x) + +#endif + +#if defined( HAVE_MEMCPY ) +# define block_copy_nn(d, s, l) memcpy(d, s, l) +# define block_copy(d, s) memcpy(d, s, N_BLOCK) +#else +# define block_copy_nn(d, s, l) copy_block_nn(d, s, l) +# define block_copy(d, s) copy_block(d, s) +#endif + +static void copy_block( void *d, const void *s ) +{ +#if defined( HAVE_UINT_32T ) + ((uint32_t*)d)[ 0] = ((uint32_t*)s)[ 0]; + ((uint32_t*)d)[ 1] = ((uint32_t*)s)[ 1]; + ((uint32_t*)d)[ 2] = ((uint32_t*)s)[ 2]; + ((uint32_t*)d)[ 3] = ((uint32_t*)s)[ 3]; +#else + ((uint8_t*)d)[ 0] = ((uint8_t*)s)[ 0]; + ((uint8_t*)d)[ 1] = ((uint8_t*)s)[ 1]; + ((uint8_t*)d)[ 2] = ((uint8_t*)s)[ 2]; + ((uint8_t*)d)[ 3] = ((uint8_t*)s)[ 3]; + ((uint8_t*)d)[ 4] = ((uint8_t*)s)[ 4]; + ((uint8_t*)d)[ 5] = ((uint8_t*)s)[ 5]; + ((uint8_t*)d)[ 6] = ((uint8_t*)s)[ 6]; + ((uint8_t*)d)[ 7] = ((uint8_t*)s)[ 7]; + ((uint8_t*)d)[ 8] = ((uint8_t*)s)[ 8]; + ((uint8_t*)d)[ 9] = ((uint8_t*)s)[ 9]; + ((uint8_t*)d)[10] = ((uint8_t*)s)[10]; + ((uint8_t*)d)[11] = ((uint8_t*)s)[11]; + ((uint8_t*)d)[12] = ((uint8_t*)s)[12]; + ((uint8_t*)d)[13] = ((uint8_t*)s)[13]; + ((uint8_t*)d)[14] = ((uint8_t*)s)[14]; + ((uint8_t*)d)[15] = ((uint8_t*)s)[15]; +#endif +} + +static void copy_block_nn( uint8_t * d, const uint8_t *s, uint8_t nn ) +{ + while( nn-- ) + //*((uint8_t*)d)++ = *((uint8_t*)s)++; + *d++ = *s++; +} + +static void xor_block( void *d, const void *s ) +{ +#if defined( HAVE_UINT_32T ) + ((uint32_t*)d)[ 0] ^= ((uint32_t*)s)[ 0]; + ((uint32_t*)d)[ 1] ^= ((uint32_t*)s)[ 1]; + ((uint32_t*)d)[ 2] ^= ((uint32_t*)s)[ 2]; + ((uint32_t*)d)[ 3] ^= ((uint32_t*)s)[ 3]; +#else + ((uint8_t*)d)[ 0] ^= ((uint8_t*)s)[ 0]; + ((uint8_t*)d)[ 1] ^= ((uint8_t*)s)[ 1]; + ((uint8_t*)d)[ 2] ^= ((uint8_t*)s)[ 2]; + ((uint8_t*)d)[ 3] ^= ((uint8_t*)s)[ 3]; + ((uint8_t*)d)[ 4] ^= ((uint8_t*)s)[ 4]; + ((uint8_t*)d)[ 5] ^= ((uint8_t*)s)[ 5]; + ((uint8_t*)d)[ 6] ^= ((uint8_t*)s)[ 6]; + ((uint8_t*)d)[ 7] ^= ((uint8_t*)s)[ 7]; + ((uint8_t*)d)[ 8] ^= ((uint8_t*)s)[ 8]; + ((uint8_t*)d)[ 9] ^= ((uint8_t*)s)[ 9]; + ((uint8_t*)d)[10] ^= ((uint8_t*)s)[10]; + ((uint8_t*)d)[11] ^= ((uint8_t*)s)[11]; + ((uint8_t*)d)[12] ^= ((uint8_t*)s)[12]; + ((uint8_t*)d)[13] ^= ((uint8_t*)s)[13]; + ((uint8_t*)d)[14] ^= ((uint8_t*)s)[14]; + ((uint8_t*)d)[15] ^= ((uint8_t*)s)[15]; +#endif +} + +static void copy_and_key( void *d, const void *s, const void *k ) +{ +#if defined( HAVE_UINT_32T ) + ((uint32_t*)d)[ 0] = ((uint32_t*)s)[ 0] ^ ((uint32_t*)k)[ 0]; + ((uint32_t*)d)[ 1] = ((uint32_t*)s)[ 1] ^ ((uint32_t*)k)[ 1]; + ((uint32_t*)d)[ 2] = ((uint32_t*)s)[ 2] ^ ((uint32_t*)k)[ 2]; + ((uint32_t*)d)[ 3] = ((uint32_t*)s)[ 3] ^ ((uint32_t*)k)[ 3]; +#elif 1 + ((uint8_t*)d)[ 0] = ((uint8_t*)s)[ 0] ^ ((uint8_t*)k)[ 0]; + ((uint8_t*)d)[ 1] = ((uint8_t*)s)[ 1] ^ ((uint8_t*)k)[ 1]; + ((uint8_t*)d)[ 2] = ((uint8_t*)s)[ 2] ^ ((uint8_t*)k)[ 2]; + ((uint8_t*)d)[ 3] = ((uint8_t*)s)[ 3] ^ ((uint8_t*)k)[ 3]; + ((uint8_t*)d)[ 4] = ((uint8_t*)s)[ 4] ^ ((uint8_t*)k)[ 4]; + ((uint8_t*)d)[ 5] = ((uint8_t*)s)[ 5] ^ ((uint8_t*)k)[ 5]; + ((uint8_t*)d)[ 6] = ((uint8_t*)s)[ 6] ^ ((uint8_t*)k)[ 6]; + ((uint8_t*)d)[ 7] = ((uint8_t*)s)[ 7] ^ ((uint8_t*)k)[ 7]; + ((uint8_t*)d)[ 8] = ((uint8_t*)s)[ 8] ^ ((uint8_t*)k)[ 8]; + ((uint8_t*)d)[ 9] = ((uint8_t*)s)[ 9] ^ ((uint8_t*)k)[ 9]; + ((uint8_t*)d)[10] = ((uint8_t*)s)[10] ^ ((uint8_t*)k)[10]; + ((uint8_t*)d)[11] = ((uint8_t*)s)[11] ^ ((uint8_t*)k)[11]; + ((uint8_t*)d)[12] = ((uint8_t*)s)[12] ^ ((uint8_t*)k)[12]; + ((uint8_t*)d)[13] = ((uint8_t*)s)[13] ^ ((uint8_t*)k)[13]; + ((uint8_t*)d)[14] = ((uint8_t*)s)[14] ^ ((uint8_t*)k)[14]; + ((uint8_t*)d)[15] = ((uint8_t*)s)[15] ^ ((uint8_t*)k)[15]; +#else + block_copy(d, s); + xor_block(d, k); +#endif +} + +static void add_round_key( uint8_t d[N_BLOCK], const uint8_t k[N_BLOCK] ) +{ + xor_block(d, k); +} + +static void shift_sub_rows( uint8_t st[N_BLOCK] ) +{ uint8_t tt; + + st[ 0] = s_box(st[ 0]); st[ 4] = s_box(st[ 4]); + st[ 8] = s_box(st[ 8]); st[12] = s_box(st[12]); + + tt = st[1]; st[ 1] = s_box(st[ 5]); st[ 5] = s_box(st[ 9]); + st[ 9] = s_box(st[13]); st[13] = s_box( tt ); + + tt = st[2]; st[ 2] = s_box(st[10]); st[10] = s_box( tt ); + tt = st[6]; st[ 6] = s_box(st[14]); st[14] = s_box( tt ); + + tt = st[15]; st[15] = s_box(st[11]); st[11] = s_box(st[ 7]); + st[ 7] = s_box(st[ 3]); st[ 3] = s_box( tt ); +} + +#if defined( AES_DEC_PREKEYED ) + +static void inv_shift_sub_rows( uint8_t st[N_BLOCK] ) +{ uint8_t tt; + + st[ 0] = is_box(st[ 0]); st[ 4] = is_box(st[ 4]); + st[ 8] = is_box(st[ 8]); st[12] = is_box(st[12]); + + tt = st[13]; st[13] = is_box(st[9]); st[ 9] = is_box(st[5]); + st[ 5] = is_box(st[1]); st[ 1] = is_box( tt ); + + tt = st[2]; st[ 2] = is_box(st[10]); st[10] = is_box( tt ); + tt = st[6]; st[ 6] = is_box(st[14]); st[14] = is_box( tt ); + + tt = st[3]; st[ 3] = is_box(st[ 7]); st[ 7] = is_box(st[11]); + st[11] = is_box(st[15]); st[15] = is_box( tt ); +} + +#endif + +#if defined( VERSION_1 ) + static void mix_sub_columns( uint8_t dt[N_BLOCK] ) + { uint8_t st[N_BLOCK]; + block_copy(st, dt); +#else + static void mix_sub_columns( uint8_t dt[N_BLOCK], uint8_t st[N_BLOCK] ) + { +#endif + dt[ 0] = gfm2_sb(st[0]) ^ gfm3_sb(st[5]) ^ s_box(st[10]) ^ s_box(st[15]); + dt[ 1] = s_box(st[0]) ^ gfm2_sb(st[5]) ^ gfm3_sb(st[10]) ^ s_box(st[15]); + dt[ 2] = s_box(st[0]) ^ s_box(st[5]) ^ gfm2_sb(st[10]) ^ gfm3_sb(st[15]); + dt[ 3] = gfm3_sb(st[0]) ^ s_box(st[5]) ^ s_box(st[10]) ^ gfm2_sb(st[15]); + + dt[ 4] = gfm2_sb(st[4]) ^ gfm3_sb(st[9]) ^ s_box(st[14]) ^ s_box(st[3]); + dt[ 5] = s_box(st[4]) ^ gfm2_sb(st[9]) ^ gfm3_sb(st[14]) ^ s_box(st[3]); + dt[ 6] = s_box(st[4]) ^ s_box(st[9]) ^ gfm2_sb(st[14]) ^ gfm3_sb(st[3]); + dt[ 7] = gfm3_sb(st[4]) ^ s_box(st[9]) ^ s_box(st[14]) ^ gfm2_sb(st[3]); + + dt[ 8] = gfm2_sb(st[8]) ^ gfm3_sb(st[13]) ^ s_box(st[2]) ^ s_box(st[7]); + dt[ 9] = s_box(st[8]) ^ gfm2_sb(st[13]) ^ gfm3_sb(st[2]) ^ s_box(st[7]); + dt[10] = s_box(st[8]) ^ s_box(st[13]) ^ gfm2_sb(st[2]) ^ gfm3_sb(st[7]); + dt[11] = gfm3_sb(st[8]) ^ s_box(st[13]) ^ s_box(st[2]) ^ gfm2_sb(st[7]); + + dt[12] = gfm2_sb(st[12]) ^ gfm3_sb(st[1]) ^ s_box(st[6]) ^ s_box(st[11]); + dt[13] = s_box(st[12]) ^ gfm2_sb(st[1]) ^ gfm3_sb(st[6]) ^ s_box(st[11]); + dt[14] = s_box(st[12]) ^ s_box(st[1]) ^ gfm2_sb(st[6]) ^ gfm3_sb(st[11]); + dt[15] = gfm3_sb(st[12]) ^ s_box(st[1]) ^ s_box(st[6]) ^ gfm2_sb(st[11]); + } + +#if defined( AES_DEC_PREKEYED ) + +#if defined( VERSION_1 ) + static void inv_mix_sub_columns( uint8_t dt[N_BLOCK] ) + { uint8_t st[N_BLOCK]; + block_copy(st, dt); +#else + static void inv_mix_sub_columns( uint8_t dt[N_BLOCK], uint8_t st[N_BLOCK] ) + { +#endif + dt[ 0] = is_box(gfm_e(st[ 0]) ^ gfm_b(st[ 1]) ^ gfm_d(st[ 2]) ^ gfm_9(st[ 3])); + dt[ 5] = is_box(gfm_9(st[ 0]) ^ gfm_e(st[ 1]) ^ gfm_b(st[ 2]) ^ gfm_d(st[ 3])); + dt[10] = is_box(gfm_d(st[ 0]) ^ gfm_9(st[ 1]) ^ gfm_e(st[ 2]) ^ gfm_b(st[ 3])); + dt[15] = is_box(gfm_b(st[ 0]) ^ gfm_d(st[ 1]) ^ gfm_9(st[ 2]) ^ gfm_e(st[ 3])); + + dt[ 4] = is_box(gfm_e(st[ 4]) ^ gfm_b(st[ 5]) ^ gfm_d(st[ 6]) ^ gfm_9(st[ 7])); + dt[ 9] = is_box(gfm_9(st[ 4]) ^ gfm_e(st[ 5]) ^ gfm_b(st[ 6]) ^ gfm_d(st[ 7])); + dt[14] = is_box(gfm_d(st[ 4]) ^ gfm_9(st[ 5]) ^ gfm_e(st[ 6]) ^ gfm_b(st[ 7])); + dt[ 3] = is_box(gfm_b(st[ 4]) ^ gfm_d(st[ 5]) ^ gfm_9(st[ 6]) ^ gfm_e(st[ 7])); + + dt[ 8] = is_box(gfm_e(st[ 8]) ^ gfm_b(st[ 9]) ^ gfm_d(st[10]) ^ gfm_9(st[11])); + dt[13] = is_box(gfm_9(st[ 8]) ^ gfm_e(st[ 9]) ^ gfm_b(st[10]) ^ gfm_d(st[11])); + dt[ 2] = is_box(gfm_d(st[ 8]) ^ gfm_9(st[ 9]) ^ gfm_e(st[10]) ^ gfm_b(st[11])); + dt[ 7] = is_box(gfm_b(st[ 8]) ^ gfm_d(st[ 9]) ^ gfm_9(st[10]) ^ gfm_e(st[11])); + + dt[12] = is_box(gfm_e(st[12]) ^ gfm_b(st[13]) ^ gfm_d(st[14]) ^ gfm_9(st[15])); + dt[ 1] = is_box(gfm_9(st[12]) ^ gfm_e(st[13]) ^ gfm_b(st[14]) ^ gfm_d(st[15])); + dt[ 6] = is_box(gfm_d(st[12]) ^ gfm_9(st[13]) ^ gfm_e(st[14]) ^ gfm_b(st[15])); + dt[11] = is_box(gfm_b(st[12]) ^ gfm_d(st[13]) ^ gfm_9(st[14]) ^ gfm_e(st[15])); + } + +#endif + +#if defined( AES_ENC_PREKEYED ) || defined( AES_DEC_PREKEYED ) + +/* Set the cipher key for the pre-keyed version */ + +return_type aes_set_key( const uint8_t key[], length_type keylen, aes_context ctx[1] ) +{ + uint8_t cc, rc, hi; + + switch( keylen ) + { + case 16: + case 24: + case 32: + break; + default: + ctx->rnd = 0; + return ( uint8_t )-1; + } + block_copy_nn(ctx->ksch, key, keylen); + hi = (keylen + 28) << 2; + ctx->rnd = (hi >> 4) - 1; + for( cc = keylen, rc = 1; cc < hi; cc += 4 ) + { uint8_t tt, t0, t1, t2, t3; + + t0 = ctx->ksch[cc - 4]; + t1 = ctx->ksch[cc - 3]; + t2 = ctx->ksch[cc - 2]; + t3 = ctx->ksch[cc - 1]; + if( cc % keylen == 0 ) + { + tt = t0; + t0 = s_box(t1) ^ rc; + t1 = s_box(t2); + t2 = s_box(t3); + t3 = s_box(tt); + rc = f2(rc); + } + else if( keylen > 24 && cc % keylen == 16 ) + { + t0 = s_box(t0); + t1 = s_box(t1); + t2 = s_box(t2); + t3 = s_box(t3); + } + tt = cc - keylen; + ctx->ksch[cc + 0] = ctx->ksch[tt + 0] ^ t0; + ctx->ksch[cc + 1] = ctx->ksch[tt + 1] ^ t1; + ctx->ksch[cc + 2] = ctx->ksch[tt + 2] ^ t2; + ctx->ksch[cc + 3] = ctx->ksch[tt + 3] ^ t3; + } + return 0; +} + +#endif + +#if defined( AES_ENC_PREKEYED ) + +/* Encrypt a single block of 16 bytes */ + +return_type aes_encrypt( const uint8_t in[N_BLOCK], uint8_t out[N_BLOCK], const aes_context ctx[1] ) +{ + if( ctx->rnd ) + { + uint8_t s1[N_BLOCK], r; + copy_and_key( s1, in, ctx->ksch ); + + for( r = 1 ; r < ctx->rnd ; ++r ) +#if defined( VERSION_1 ) + { + mix_sub_columns( s1 ); + add_round_key( s1, ctx->ksch + r * N_BLOCK); + } +#else + { uint8_t s2[N_BLOCK]; + mix_sub_columns( s2, s1 ); + copy_and_key( s1, s2, ctx->ksch + r * N_BLOCK); + } +#endif + shift_sub_rows( s1 ); + copy_and_key( out, s1, ctx->ksch + r * N_BLOCK ); + } + else + return ( uint8_t )-1; + return 0; +} + +/* CBC encrypt a number of blocks (input and return an IV) */ + +return_type aes_cbc_encrypt( const uint8_t *in, uint8_t *out, + int32_t n_block, uint8_t iv[N_BLOCK], const aes_context ctx[1] ) +{ + + while(n_block--) + { + xor_block(iv, in); + if(aes_encrypt(iv, iv, ctx) != EXIT_SUCCESS) + return EXIT_FAILURE; + //memcpy(out, iv, N_BLOCK); + block_copy(out, iv); + in += N_BLOCK; + out += N_BLOCK; + } + return EXIT_SUCCESS; +} + +#endif + +#if defined( AES_DEC_PREKEYED ) + +/* Decrypt a single block of 16 bytes */ + +return_type aes_decrypt( const uint8_t in[N_BLOCK], uint8_t out[N_BLOCK], const aes_context ctx[1] ) +{ + if( ctx->rnd ) + { + uint8_t s1[N_BLOCK], r; + copy_and_key( s1, in, ctx->ksch + ctx->rnd * N_BLOCK ); + inv_shift_sub_rows( s1 ); + + for( r = ctx->rnd ; --r ; ) +#if defined( VERSION_1 ) + { + add_round_key( s1, ctx->ksch + r * N_BLOCK ); + inv_mix_sub_columns( s1 ); + } +#else + { uint8_t s2[N_BLOCK]; + copy_and_key( s2, s1, ctx->ksch + r * N_BLOCK ); + inv_mix_sub_columns( s1, s2 ); + } +#endif + copy_and_key( out, s1, ctx->ksch ); + } + else + return -1; + return 0; +} + +/* CBC decrypt a number of blocks (input and return an IV) */ + +return_type aes_cbc_decrypt( const uint8_t *in, uint8_t *out, + int32_t n_block, uint8_t iv[N_BLOCK], const aes_context ctx[1] ) +{ + while(n_block--) + { uint8_t tmp[N_BLOCK]; + + //memcpy(tmp, in, N_BLOCK); + block_copy(tmp, in); + if(aes_decrypt(in, out, ctx) != EXIT_SUCCESS) + return EXIT_FAILURE; + xor_block(out, iv); + //memcpy(iv, tmp, N_BLOCK); + block_copy(iv, tmp); + in += N_BLOCK; + out += N_BLOCK; + } + return EXIT_SUCCESS; +} + +#endif + +#if defined( AES_ENC_128_OTFK ) + +/* The 'on the fly' encryption key update for for 128 bit keys */ + +static void update_encrypt_key_128( uint8_t k[N_BLOCK], uint8_t *rc ) +{ uint8_t cc; + + k[0] ^= s_box(k[13]) ^ *rc; + k[1] ^= s_box(k[14]); + k[2] ^= s_box(k[15]); + k[3] ^= s_box(k[12]); + *rc = f2( *rc ); + + for(cc = 4; cc < 16; cc += 4 ) + { + k[cc + 0] ^= k[cc - 4]; + k[cc + 1] ^= k[cc - 3]; + k[cc + 2] ^= k[cc - 2]; + k[cc + 3] ^= k[cc - 1]; + } +} + +/* Encrypt a single block of 16 bytes with 'on the fly' 128 bit keying */ + +void aes_encrypt_128( const uint8_t in[N_BLOCK], uint8_t out[N_BLOCK], + const uint8_t key[N_BLOCK], uint8_t o_key[N_BLOCK] ) +{ uint8_t s1[N_BLOCK], r, rc = 1; + + if(o_key != key) + block_copy( o_key, key ); + copy_and_key( s1, in, o_key ); + + for( r = 1 ; r < 10 ; ++r ) +#if defined( VERSION_1 ) + { + mix_sub_columns( s1 ); + update_encrypt_key_128( o_key, &rc ); + add_round_key( s1, o_key ); + } +#else + { uint8_t s2[N_BLOCK]; + mix_sub_columns( s2, s1 ); + update_encrypt_key_128( o_key, &rc ); + copy_and_key( s1, s2, o_key ); + } +#endif + + shift_sub_rows( s1 ); + update_encrypt_key_128( o_key, &rc ); + copy_and_key( out, s1, o_key ); +} + +#endif + +#if defined( AES_DEC_128_OTFK ) + +/* The 'on the fly' decryption key update for for 128 bit keys */ + +static void update_decrypt_key_128( uint8_t k[N_BLOCK], uint8_t *rc ) +{ uint8_t cc; + + for( cc = 12; cc > 0; cc -= 4 ) + { + k[cc + 0] ^= k[cc - 4]; + k[cc + 1] ^= k[cc - 3]; + k[cc + 2] ^= k[cc - 2]; + k[cc + 3] ^= k[cc - 1]; + } + *rc = d2(*rc); + k[0] ^= s_box(k[13]) ^ *rc; + k[1] ^= s_box(k[14]); + k[2] ^= s_box(k[15]); + k[3] ^= s_box(k[12]); +} + +/* Decrypt a single block of 16 bytes with 'on the fly' 128 bit keying */ + +void aes_decrypt_128( const uint8_t in[N_BLOCK], uint8_t out[N_BLOCK], + const uint8_t key[N_BLOCK], uint8_t o_key[N_BLOCK] ) +{ + uint8_t s1[N_BLOCK], r, rc = 0x6c; + if(o_key != key) + block_copy( o_key, key ); + + copy_and_key( s1, in, o_key ); + inv_shift_sub_rows( s1 ); + + for( r = 10 ; --r ; ) +#if defined( VERSION_1 ) + { + update_decrypt_key_128( o_key, &rc ); + add_round_key( s1, o_key ); + inv_mix_sub_columns( s1 ); + } +#else + { uint8_t s2[N_BLOCK]; + update_decrypt_key_128( o_key, &rc ); + copy_and_key( s2, s1, o_key ); + inv_mix_sub_columns( s1, s2 ); + } +#endif + update_decrypt_key_128( o_key, &rc ); + copy_and_key( out, s1, o_key ); +} + +#endif + +#if defined( AES_ENC_256_OTFK ) + +/* The 'on the fly' encryption key update for for 256 bit keys */ + +static void update_encrypt_key_256( uint8_t k[2 * N_BLOCK], uint8_t *rc ) +{ uint8_t cc; + + k[0] ^= s_box(k[29]) ^ *rc; + k[1] ^= s_box(k[30]); + k[2] ^= s_box(k[31]); + k[3] ^= s_box(k[28]); + *rc = f2( *rc ); + + for(cc = 4; cc < 16; cc += 4) + { + k[cc + 0] ^= k[cc - 4]; + k[cc + 1] ^= k[cc - 3]; + k[cc + 2] ^= k[cc - 2]; + k[cc + 3] ^= k[cc - 1]; + } + + k[16] ^= s_box(k[12]); + k[17] ^= s_box(k[13]); + k[18] ^= s_box(k[14]); + k[19] ^= s_box(k[15]); + + for( cc = 20; cc < 32; cc += 4 ) + { + k[cc + 0] ^= k[cc - 4]; + k[cc + 1] ^= k[cc - 3]; + k[cc + 2] ^= k[cc - 2]; + k[cc + 3] ^= k[cc - 1]; + } +} + +/* Encrypt a single block of 16 bytes with 'on the fly' 256 bit keying */ + +void aes_encrypt_256( const uint8_t in[N_BLOCK], uint8_t out[N_BLOCK], + const uint8_t key[2 * N_BLOCK], uint8_t o_key[2 * N_BLOCK] ) +{ + uint8_t s1[N_BLOCK], r, rc = 1; + if(o_key != key) + { + block_copy( o_key, key ); + block_copy( o_key + 16, key + 16 ); + } + copy_and_key( s1, in, o_key ); + + for( r = 1 ; r < 14 ; ++r ) +#if defined( VERSION_1 ) + { + mix_sub_columns(s1); + if( r & 1 ) + add_round_key( s1, o_key + 16 ); + else + { + update_encrypt_key_256( o_key, &rc ); + add_round_key( s1, o_key ); + } + } +#else + { uint8_t s2[N_BLOCK]; + mix_sub_columns( s2, s1 ); + if( r & 1 ) + copy_and_key( s1, s2, o_key + 16 ); + else + { + update_encrypt_key_256( o_key, &rc ); + copy_and_key( s1, s2, o_key ); + } + } +#endif + + shift_sub_rows( s1 ); + update_encrypt_key_256( o_key, &rc ); + copy_and_key( out, s1, o_key ); +} + +#endif + +#if defined( AES_DEC_256_OTFK ) + +/* The 'on the fly' encryption key update for for 256 bit keys */ + +static void update_decrypt_key_256( uint8_t k[2 * N_BLOCK], uint8_t *rc ) +{ uint8_t cc; + + for(cc = 28; cc > 16; cc -= 4) + { + k[cc + 0] ^= k[cc - 4]; + k[cc + 1] ^= k[cc - 3]; + k[cc + 2] ^= k[cc - 2]; + k[cc + 3] ^= k[cc - 1]; + } + + k[16] ^= s_box(k[12]); + k[17] ^= s_box(k[13]); + k[18] ^= s_box(k[14]); + k[19] ^= s_box(k[15]); + + for(cc = 12; cc > 0; cc -= 4) + { + k[cc + 0] ^= k[cc - 4]; + k[cc + 1] ^= k[cc - 3]; + k[cc + 2] ^= k[cc - 2]; + k[cc + 3] ^= k[cc - 1]; + } + + *rc = d2(*rc); + k[0] ^= s_box(k[29]) ^ *rc; + k[1] ^= s_box(k[30]); + k[2] ^= s_box(k[31]); + k[3] ^= s_box(k[28]); +} + +/* Decrypt a single block of 16 bytes with 'on the fly' + 256 bit keying +*/ +void aes_decrypt_256( const uint8_t in[N_BLOCK], uint8_t out[N_BLOCK], + const uint8_t key[2 * N_BLOCK], uint8_t o_key[2 * N_BLOCK] ) +{ + uint8_t s1[N_BLOCK], r, rc = 0x80; + + if(o_key != key) + { + block_copy( o_key, key ); + block_copy( o_key + 16, key + 16 ); + } + + copy_and_key( s1, in, o_key ); + inv_shift_sub_rows( s1 ); + + for( r = 14 ; --r ; ) +#if defined( VERSION_1 ) + { + if( ( r & 1 ) ) + { + update_decrypt_key_256( o_key, &rc ); + add_round_key( s1, o_key + 16 ); + } + else + add_round_key( s1, o_key ); + inv_mix_sub_columns( s1 ); + } +#else + { uint8_t s2[N_BLOCK]; + if( ( r & 1 ) ) + { + update_decrypt_key_256( o_key, &rc ); + copy_and_key( s2, s1, o_key + 16 ); + } + else + copy_and_key( s2, s1, o_key ); + inv_mix_sub_columns( s1, s2 ); + } +#endif + copy_and_key( out, s1, o_key ); +} + +#endif diff --git a/lib/crypto/aes.h b/lib/crypto/aes.h new file mode 100755 index 0000000..5fdc143 --- /dev/null +++ b/lib/crypto/aes.h @@ -0,0 +1,160 @@ +/* + --------------------------------------------------------------------------- + Copyright (c) 1998-2008, Brian Gladman, Worcester, UK. All rights reserved. + + LICENSE TERMS + + The redistribution and use of this software (with or without changes) + is allowed without the payment of fees or royalties provided that: + + 1. source code distributions include the above copyright notice, this + list of conditions and the following disclaimer; + + 2. binary distributions include the above copyright notice, this list + of conditions and the following disclaimer in their documentation; + + 3. the name of the copyright holder is not used to endorse products + built using this software without specific written permission. + + DISCLAIMER + + This software is provided 'as is' with no explicit or implied warranties + in respect of its properties, including, but not limited to, correctness + and/or fitness for purpose. + --------------------------------------------------------------------------- + Issue 09/09/2006 + + This is an AES implementation that uses only 8-bit byte operations on the + cipher state. + */ + +#ifndef AES_H +#define AES_H + +#if 1 +# define AES_ENC_PREKEYED /* AES encryption with a precomputed key schedule */ +#endif +#if 0 +# define AES_DEC_PREKEYED /* AES decryption with a precomputed key schedule */ +#endif +#if 0 +# define AES_ENC_128_OTFK /* AES encryption with 'on the fly' 128 bit keying */ +#endif +#if 0 +# define AES_DEC_128_OTFK /* AES decryption with 'on the fly' 128 bit keying */ +#endif +#if 0 +# define AES_ENC_256_OTFK /* AES encryption with 'on the fly' 256 bit keying */ +#endif +#if 0 +# define AES_DEC_256_OTFK /* AES decryption with 'on the fly' 256 bit keying */ +#endif + +#define N_ROW 4 +#define N_COL 4 +#define N_BLOCK (N_ROW * N_COL) +#define N_MAX_ROUNDS 14 + +typedef uint8_t return_type; + +/* Warning: The key length for 256 bit keys overflows a byte + (see comment below) +*/ + +typedef uint8_t length_type; + +typedef struct +{ uint8_t ksch[(N_MAX_ROUNDS + 1) * N_BLOCK]; + uint8_t rnd; +} aes_context; + +/* The following calls are for a precomputed key schedule + + NOTE: If the length_type used for the key length is an + unsigned 8-bit character, a key length of 256 bits must + be entered as a length in bytes (valid inputs are hence + 128, 192, 16, 24 and 32). +*/ + +#if defined( AES_ENC_PREKEYED ) || defined( AES_DEC_PREKEYED ) + +return_type aes_set_key( const uint8_t key[], + length_type keylen, + aes_context ctx[1] ); +#endif + +#if defined( AES_ENC_PREKEYED ) + +return_type aes_encrypt( const uint8_t in[N_BLOCK], + uint8_t out[N_BLOCK], + const aes_context ctx[1] ); + +return_type aes_cbc_encrypt( const uint8_t *in, + uint8_t *out, + int32_t n_block, + uint8_t iv[N_BLOCK], + const aes_context ctx[1] ); +#endif + +#if defined( AES_DEC_PREKEYED ) + +return_type aes_decrypt( const uint8_t in[N_BLOCK], + uint8_t out[N_BLOCK], + const aes_context ctx[1] ); + +return_type aes_cbc_decrypt( const uint8_t *in, + uint8_t *out, + int32_t n_block, + uint8_t iv[N_BLOCK], + const aes_context ctx[1] ); +#endif + +/* The following calls are for 'on the fly' keying. In this case the + encryption and decryption keys are different. + + The encryption subroutines take a key in an array of bytes in + key[L] where L is 16, 24 or 32 bytes for key lengths of 128, + 192, and 256 bits respectively. They then encrypts the input + data, in[] with this key and put the reult in the output array + out[]. In addition, the second key array, o_key[L], is used + to output the key that is needed by the decryption subroutine + to reverse the encryption operation. The two key arrays can + be the same array but in this case the original key will be + overwritten. + + In the same way, the decryption subroutines output keys that + can be used to reverse their effect when used for encryption. + + Only 128 and 256 bit keys are supported in these 'on the fly' + modes. +*/ + +#if defined( AES_ENC_128_OTFK ) +void aes_encrypt_128( const uint8_t in[N_BLOCK], + uint8_t out[N_BLOCK], + const uint8_t key[N_BLOCK], + uint8_t o_key[N_BLOCK] ); +#endif + +#if defined( AES_DEC_128_OTFK ) +void aes_decrypt_128( const uint8_t in[N_BLOCK], + uint8_t out[N_BLOCK], + const uint8_t key[N_BLOCK], + uint8_t o_key[N_BLOCK] ); +#endif + +#if defined( AES_ENC_256_OTFK ) +void aes_encrypt_256( const uint8_t in[N_BLOCK], + uint8_t out[N_BLOCK], + const uint8_t key[2 * N_BLOCK], + uint8_t o_key[2 * N_BLOCK] ); +#endif + +#if defined( AES_DEC_256_OTFK ) +void aes_decrypt_256( const uint8_t in[N_BLOCK], + uint8_t out[N_BLOCK], + const uint8_t key[2 * N_BLOCK], + uint8_t o_key[2 * N_BLOCK] ); +#endif + +#endif diff --git a/lib/crypto/cmac.c b/lib/crypto/cmac.c new file mode 100755 index 0000000..779b668 --- /dev/null +++ b/lib/crypto/cmac.c @@ -0,0 +1,153 @@ +/************************************************************************** +Copyright (C) 2009 Lander Casado, Philippas Tsigas + +All rights reserved. + +Permission is hereby granted, free of charge, to any person obtaining +a copy of this software and associated documentation files +(the "Software"), to deal with the Software without restriction, including +without limitation the rights to use, copy, modify, merge, publish, +distribute, sublicense, and/or sell copies of the Software, and to +permit persons to whom the Software is furnished to do so, subject to +the following conditions: + +Redistributions of source code must retain the above copyright notice, +this list of conditions and the following disclaimers. Redistributions in +binary form must reproduce the above copyright notice, this list of +conditions and the following disclaimers in the documentation and/or +other materials provided with the distribution. + +In no event shall the authors or copyright holders be liable for any special, +incidental, indirect or consequential damages of any kind, or any damages +whatsoever resulting from loss of use, data or profits, whether or not +advised of the possibility of damage, and on any theory of liability, +arising out of or in connection with the use or performance of this software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS +OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +CONTRIBUTORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING +FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER +DEALINGS WITH THE SOFTWARE + +*****************************************************************************/ +//#include +//#include +#include +#include "aes.h" +#include "cmac.h" +#include "utilities.h" + +#define LSHIFT(v, r) do { \ + int32_t i; \ + for (i = 0; i < 15; i++) \ + (r)[i] = (v)[i] << 1 | (v)[i + 1] >> 7; \ + (r)[15] = (v)[15] << 1; \ + } while (0) + +#define XOR(v, r) do { \ + int32_t i; \ + for (i = 0; i < 16; i++) \ + { \ + (r)[i] = (r)[i] ^ (v)[i]; \ + } \ + } while (0) \ + + +void AES_CMAC_Init(AES_CMAC_CTX *ctx) +{ + memset1(ctx->X, 0, sizeof ctx->X); + ctx->M_n = 0; + memset1(ctx->rijndael.ksch, '\0', 240); +} + +void AES_CMAC_SetKey(AES_CMAC_CTX *ctx, const uint8_t key[AES_CMAC_KEY_LENGTH]) +{ + //rijndael_set_key_enc_only(&ctx->rijndael, key, 128); + aes_set_key( key, AES_CMAC_KEY_LENGTH, &ctx->rijndael); +} + +void AES_CMAC_Update(AES_CMAC_CTX *ctx, const uint8_t *data, uint32_t len) +{ + uint32_t mlen; + uint8_t in[16]; + + if (ctx->M_n > 0) { + mlen = MIN(16 - ctx->M_n, len); + memcpy1(ctx->M_last + ctx->M_n, data, mlen); + ctx->M_n += mlen; + if (ctx->M_n < 16 || len == mlen) + return; + XOR(ctx->M_last, ctx->X); + //rijndael_encrypt(&ctx->rijndael, ctx->X, ctx->X); + aes_encrypt( ctx->X, ctx->X, &ctx->rijndael); + data += mlen; + len -= mlen; + } + while (len > 16) { /* not last block */ + + XOR(data, ctx->X); + //rijndael_encrypt(&ctx->rijndael, ctx->X, ctx->X); + + memcpy1(in, &ctx->X[0], 16); //Bestela ez du ondo iten + aes_encrypt( in, in, &ctx->rijndael); + memcpy1(&ctx->X[0], in, 16); + + data += 16; + len -= 16; + } + /* potential last block, save it */ + memcpy1(ctx->M_last, data, len); + ctx->M_n = len; +} + +void AES_CMAC_Final(uint8_t digest[AES_CMAC_DIGEST_LENGTH], AES_CMAC_CTX *ctx) +{ + uint8_t K[16]; + uint8_t in[16]; + /* generate subkey K1 */ + memset1(K, '\0', 16); + + //rijndael_encrypt(&ctx->rijndael, K, K); + + aes_encrypt( K, K, &ctx->rijndael); + + if (K[0] & 0x80) { + LSHIFT(K, K); + K[15] ^= 0x87; + } else + LSHIFT(K, K); + + + if (ctx->M_n == 16) { + /* last block was a complete block */ + XOR(K, ctx->M_last); + + } else { + /* generate subkey K2 */ + if (K[0] & 0x80) { + LSHIFT(K, K); + K[15] ^= 0x87; + } else + LSHIFT(K, K); + + /* padding(M_last) */ + ctx->M_last[ctx->M_n] = 0x80; + while (++ctx->M_n < 16) + ctx->M_last[ctx->M_n] = 0; + + XOR(K, ctx->M_last); + + + } + XOR(ctx->M_last, ctx->X); + + //rijndael_encrypt(&ctx->rijndael, ctx->X, digest); + + memcpy1(in, &ctx->X[0], 16); //Bestela ez du ondo iten + aes_encrypt(in, digest, &ctx->rijndael); + memset1(K, 0, sizeof K); + +} + diff --git a/lib/crypto/cmac.h b/lib/crypto/cmac.h new file mode 100755 index 0000000..c12e970 --- /dev/null +++ b/lib/crypto/cmac.h @@ -0,0 +1,63 @@ +/************************************************************************** +Copyright (C) 2009 Lander Casado, Philippas Tsigas + +All rights reserved. + +Permission is hereby granted, free of charge, to any person obtaining +a copy of this software and associated documentation files +(the "Software"), to deal with the Software without restriction, including +without limitation the rights to use, copy, modify, merge, publish, +distribute, sublicense, and/or sell copies of the Software, and to +permit persons to whom the Software is furnished to do so, subject to +the following conditions: + +Redistributions of source code must retain the above copyright notice, +this list of conditions and the following disclaimers. Redistributions in +binary form must reproduce the above copyright notice, this list of +conditions and the following disclaimers in the documentation and/or +other materials provided with the distribution. + +In no event shall the authors or copyright holders be liable for any special, +incidental, indirect or consequential damages of any kind, or any damages +whatsoever resulting from loss of use, data or profits, whether or not +advised of the possibility of damage, and on any theory of liability, +arising out of or in connection with the use or performance of this software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS +OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +CONTRIBUTORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING +FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER +DEALINGS WITH THE SOFTWARE + +*****************************************************************************/ + +#ifndef _CMAC_H_ +#define _CMAC_H_ + +#include "aes.h" + +#define AES_CMAC_KEY_LENGTH 16 +#define AES_CMAC_DIGEST_LENGTH 16 + +typedef struct _AES_CMAC_CTX { + aes_context rijndael; + uint8_t X[16]; + uint8_t M_last[16]; + uint32_t M_n; + } AES_CMAC_CTX; + +//#include + +//__BEGIN_DECLS +void AES_CMAC_Init(AES_CMAC_CTX * ctx); +void AES_CMAC_SetKey(AES_CMAC_CTX * ctx, const uint8_t key[AES_CMAC_KEY_LENGTH]); +void AES_CMAC_Update(AES_CMAC_CTX * ctx, const uint8_t * data, uint32_t len); + // __attribute__((__bounded__(__string__,2,3))); +void AES_CMAC_Final(uint8_t digest[AES_CMAC_DIGEST_LENGTH], AES_CMAC_CTX * ctx); + // __attribute__((__bounded__(__minbytes__,1,AES_CMAC_DIGEST_LENGTH))); +//__END_DECLS + +#endif /* _CMAC_H_ */ + diff --git a/lib/radio/radio.h b/lib/radio/radio.h new file mode 100755 index 0000000..58d18d0 --- /dev/null +++ b/lib/radio/radio.h @@ -0,0 +1,335 @@ +/* + / _____) _ | | +( (____ _____ ____ _| |_ _____ ____| |__ + \____ \| ___ | (_ _) ___ |/ ___) _ \ + _____) ) ____| | | || |_| ____( (___| | | | +(______/|_____)_|_|_| \__)_____)\____)_| |_| + (C)2013 Semtech + +Description: Generic radio driver definition + +License: Revised BSD License, see LICENSE.TXT file include in the project + +Maintainer: Miguel Luis and Gregory Cristian +*/ +#ifndef __RADIO_H__ +#define __RADIO_H__ + +/*! + * Radio driver supported modems + */ +typedef enum +{ + MODEM_FSK = 0, + MODEM_LORA, +}RadioModems_t; + +/*! + * Radio driver internal state machine states definition + */ +typedef enum +{ + RF_IDLE = 0, //!< The radio is idle + RF_RX_RUNNING, //!< The radio is in reception state + RF_TX_RUNNING, //!< The radio is in transmission state + RF_CAD, //!< The radio is doing channel activity detection +}RadioState_t; + +/*! + * \brief Radio driver callback functions + */ +typedef struct +{ + /*! + * \brief Tx Done callback prototype. + */ + void ( *TxDone )( void ); + /*! + * \brief Tx Timeout callback prototype. + */ + void ( *TxTimeout )( void ); + /*! + * \brief Rx Done callback prototype. + * + * \param [IN] payload Received buffer pointer + * \param [IN] size Received buffer size + * \param [IN] rssi RSSI value computed while receiving the frame [dBm] + * \param [IN] snr Raw SNR value given by the radio hardware + * FSK : N/A ( set to 0 ) + * LoRa: SNR value in dB + */ + void ( *RxDone )( uint8_t *payload, uint16_t size, int16_t rssi, int8_t snr ); + /*! + * \brief Rx Timeout callback prototype. + */ + void ( *RxTimeout )( void ); + /*! + * \brief Rx Error callback prototype. + */ + void ( *RxError )( void ); + /*! + * \brief FHSS Change Channel callback prototype. + * + * \param [IN] currentChannel Index number of the current channel + */ + void ( *FhssChangeChannel )( uint8_t currentChannel ); + + /*! + * \brief CAD Done callback prototype. + * + * \param [IN] channelDetected Channel Activity detected during the CAD + */ + void ( *CadDone ) ( bool channelActivityDetected ); +}RadioEvents_t; + +/*! + * \brief Radio driver definition + */ +struct Radio_s +{ + /*! + * \brief Initializes the radio + * + * \param [IN] events Structure containing the driver callback functions + */ + void ( *Init )( RadioEvents_t *events ); + /*! + * Return current radio status + * + * \param status Radio status.[RF_IDLE, RF_RX_RUNNING, RF_TX_RUNNING] + */ + RadioState_t ( *GetStatus )( void ); + /*! + * \brief Configures the radio with the given modem + * + * \param [IN] modem Modem to be used [0: FSK, 1: LoRa] + */ + void ( *SetModem )( RadioModems_t modem ); + /*! + * \brief Sets the channel frequency + * + * \param [IN] freq Channel RF frequency + */ + void ( *SetChannel )( uint32_t freq ); + /*! + * \brief Checks if the channel is free for the given time + * + * \param [IN] modem Radio modem to be used [0: FSK, 1: LoRa] + * \param [IN] freq Channel RF frequency + * \param [IN] rssiThresh RSSI threshold + * \param [IN] maxCarrierSenseTime Max time while the RSSI is measured + * + * \retval isFree [true: Channel is free, false: Channel is not free] + */ + bool ( *IsChannelFree )( RadioModems_t modem, uint32_t freq, int16_t rssiThresh, uint32_t maxCarrierSenseTime ); + /*! + * \brief Generates a 32 bits random value based on the RSSI readings + * + * \remark This function sets the radio in LoRa modem mode and disables + * all interrupts. + * After calling this function either Radio.SetRxConfig or + * Radio.SetTxConfig functions must be called. + * + * \retval randomValue 32 bits random value + */ + uint32_t ( *Random )( void ); + /*! + * \brief Sets the reception parameters + * + * \param [IN] modem Radio modem to be used [0: FSK, 1: LoRa] + * \param [IN] bandwidth Sets the bandwidth + * FSK : >= 2600 and <= 250000 Hz + * LoRa: [0: 125 kHz, 1: 250 kHz, + * 2: 500 kHz, 3: Reserved] + * \param [IN] datarate Sets the Datarate + * FSK : 600..300000 bits/s + * LoRa: [6: 64, 7: 128, 8: 256, 9: 512, + * 10: 1024, 11: 2048, 12: 4096 chips] + * \param [IN] coderate Sets the coding rate (LoRa only) + * FSK : N/A ( set to 0 ) + * LoRa: [1: 4/5, 2: 4/6, 3: 4/7, 4: 4/8] + * \param [IN] bandwidthAfc Sets the AFC Bandwidth (FSK only) + * FSK : >= 2600 and <= 250000 Hz + * LoRa: N/A ( set to 0 ) + * \param [IN] preambleLen Sets the Preamble length + * FSK : Number of bytes + * LoRa: Length in symbols (the hardware adds 4 more symbols) + * \param [IN] symbTimeout Sets the RxSingle timeout value + * FSK : timeout in number of bytes + * LoRa: timeout in symbols + * \param [IN] fixLen Fixed length packets [0: variable, 1: fixed] + * \param [IN] payloadLen Sets payload length when fixed length is used + * \param [IN] crcOn Enables/Disables the CRC [0: OFF, 1: ON] + * \param [IN] freqHopOn Enables disables the intra-packet frequency hopping + * FSK : N/A ( set to 0 ) + * LoRa: [0: OFF, 1: ON] + * \param [IN] hopPeriod Number of symbols between each hop + * FSK : N/A ( set to 0 ) + * LoRa: Number of symbols + * \param [IN] iqInverted Inverts IQ signals (LoRa only) + * FSK : N/A ( set to 0 ) + * LoRa: [0: not inverted, 1: inverted] + * \param [IN] rxContinuous Sets the reception in continuous mode + * [false: single mode, true: continuous mode] + */ + void ( *SetRxConfig )( RadioModems_t modem, uint32_t bandwidth, + uint32_t datarate, uint8_t coderate, + uint32_t bandwidthAfc, uint16_t preambleLen, + uint16_t symbTimeout, bool fixLen, + uint8_t payloadLen, + bool crcOn, bool freqHopOn, uint8_t hopPeriod, + bool iqInverted, bool rxContinuous ); + /*! + * \brief Sets the transmission parameters + * + * \param [IN] modem Radio modem to be used [0: FSK, 1: LoRa] + * \param [IN] power Sets the output power [dBm] + * \param [IN] fdev Sets the frequency deviation (FSK only) + * FSK : [Hz] + * LoRa: 0 + * \param [IN] bandwidth Sets the bandwidth (LoRa only) + * FSK : 0 + * LoRa: [0: 125 kHz, 1: 250 kHz, + * 2: 500 kHz, 3: Reserved] + * \param [IN] datarate Sets the Datarate + * FSK : 600..300000 bits/s + * LoRa: [6: 64, 7: 128, 8: 256, 9: 512, + * 10: 1024, 11: 2048, 12: 4096 chips] + * \param [IN] coderate Sets the coding rate (LoRa only) + * FSK : N/A ( set to 0 ) + * LoRa: [1: 4/5, 2: 4/6, 3: 4/7, 4: 4/8] + * \param [IN] preambleLen Sets the preamble length + * FSK : Number of bytes + * LoRa: Length in symbols (the hardware adds 4 more symbols) + * \param [IN] fixLen Fixed length packets [0: variable, 1: fixed] + * \param [IN] crcOn Enables disables the CRC [0: OFF, 1: ON] + * \param [IN] freqHopOn Enables disables the intra-packet frequency hopping + * FSK : N/A ( set to 0 ) + * LoRa: [0: OFF, 1: ON] + * \param [IN] hopPeriod Number of symbols between each hop + * FSK : N/A ( set to 0 ) + * LoRa: Number of symbols + * \param [IN] iqInverted Inverts IQ signals (LoRa only) + * FSK : N/A ( set to 0 ) + * LoRa: [0: not inverted, 1: inverted] + * \param [IN] timeout Transmission timeout [ms] + */ + void ( *SetTxConfig )( RadioModems_t modem, int8_t power, uint32_t fdev, + uint32_t bandwidth, uint32_t datarate, + uint8_t coderate, uint16_t preambleLen, + bool fixLen, bool crcOn, bool freqHopOn, + uint8_t hopPeriod, bool iqInverted, uint32_t timeout ); + /*! + * \brief Checks if the given RF frequency is supported by the hardware + * + * \param [IN] frequency RF frequency to be checked + * \retval isSupported [true: supported, false: unsupported] + */ + bool ( *CheckRfFrequency )( uint32_t frequency ); + /*! + * \brief Computes the packet time on air in ms for the given payload + * + * \Remark Can only be called once SetRxConfig or SetTxConfig have been called + * + * \param [IN] modem Radio modem to be used [0: FSK, 1: LoRa] + * \param [IN] pktLen Packet payload length + * + * \retval airTime Computed airTime (ms) for the given packet payload length + */ + uint32_t ( *TimeOnAir )( RadioModems_t modem, uint8_t pktLen ); + /*! + * \brief Sends the buffer of size. Prepares the packet to be sent and sets + * the radio in transmission + * + * \param [IN]: buffer Buffer pointer + * \param [IN]: size Buffer size + */ + void ( *Send )( uint8_t *buffer, uint8_t size ); + /*! + * \brief Sets the radio in sleep mode + */ + void ( *Sleep )( void ); + /*! + * \brief Sets the radio in standby mode + */ + void ( *Standby )( void ); + /*! + * \brief Sets the radio in reception mode for the given time + * \param [IN] timeout Reception timeout [ms] + * [0: continuous, others timeout] + */ + void ( *Rx )( uint32_t timeout ); + /*! + * \brief Start a Channel Activity Detection + */ + void ( *StartCad )( void ); + /*! + * \brief Sets the radio in continuous wave transmission mode + * + * \param [IN]: freq Channel RF frequency + * \param [IN]: power Sets the output power [dBm] + * \param [IN]: time Transmission mode timeout [s] + */ + void ( *SetTxContinuousWave )( uint32_t freq, int8_t power, uint16_t time ); + /*! + * \brief Reads the current RSSI value + * + * \retval rssiValue Current RSSI value in [dBm] + */ + int16_t ( *Rssi )( RadioModems_t modem ); + /*! + * \brief Writes the radio register at the specified address + * + * \param [IN]: addr Register address + * \param [IN]: data New register value + */ + void ( *Write )( uint8_t addr, uint8_t data ); + /*! + * \brief Reads the radio register at the specified address + * + * \param [IN]: addr Register address + * \retval data Register value + */ + uint8_t ( *Read )( uint8_t addr ); + /*! + * \brief Writes multiple radio registers starting at address + * + * \param [IN] addr First Radio register address + * \param [IN] buffer Buffer containing the new register's values + * \param [IN] size Number of registers to be written + */ + void ( *WriteBuffer )( uint8_t addr, uint8_t *buffer, uint8_t size ); + /*! + * \brief Reads multiple radio registers starting at address + * + * \param [IN] addr First Radio register address + * \param [OUT] buffer Buffer where to copy the registers data + * \param [IN] size Number of registers to be read + */ + void ( *ReadBuffer )( uint8_t addr, uint8_t *buffer, uint8_t size ); + /*! + * \brief Sets the maximum payload length. + * + * \param [IN] modem Radio modem to be used [0: FSK, 1: LoRa] + * \param [IN] max Maximum payload length in bytes + */ + void ( *SetMaxPayloadLength )( RadioModems_t modem, uint8_t max ); + /*! + * \brief Sets the network to public or private. Updates the sync byte. + * + * \remark Applies to LoRa modem only + * + * \param [IN] enable if true, it enables a public network + */ + void ( *SetPublicNetwork )( bool enable ); +}; + +/*! + * \brief Radio driver + * + * \remark This variable is defined and initialized in the specific radio + * board implementation + */ +extern const struct Radio_s Radio; + +#endif // __RADIO_H__ diff --git a/lib/radio/sx1276/sx1276.c b/lib/radio/sx1276/sx1276.c new file mode 100755 index 0000000..bb88129 --- /dev/null +++ b/lib/radio/sx1276/sx1276.c @@ -0,0 +1,1816 @@ +/* + / _____) _ | | +( (____ _____ ____ _| |_ _____ ____| |__ + \____ \| ___ | (_ _) ___ |/ ___) _ \ + _____) ) ____| | | || |_| ____( (___| | | | +(______/|_____)_|_|_| \__)_____)\____)_| |_| + (C)2013 Semtech + +Description: Generic SX1276 driver implementation + +License: Revised BSD License, see LICENSE.TXT file include in the project + +Maintainer: Miguel Luis, Gregory Cristian and Wael Guibene +*/ +#include +#include +#include "board.h" +#include "radio.h" +#include "sx1276.h" +#include "sx1276-board.h" + +/* + * Local types definition + */ + +/*! + * Radio registers definition + */ +typedef struct +{ + RadioModems_t Modem; + uint8_t Addr; + uint8_t Value; +}RadioRegisters_t; + +/*! + * FSK bandwidth definition + */ +typedef struct +{ + uint32_t bandwidth; + uint8_t RegValue; +}FskBandwidth_t; + + +/* + * Private functions prototypes + */ + +/*! + * Performs the Rx chain calibration for LF and HF bands + * \remark Must be called just after the reset so all registers are at their + * default values + */ +static void RxChainCalibration( void ); + +/*! + * \brief Resets the SX1276 + */ +void SX1276Reset( void ); + +/*! + * \brief Sets the SX1276 in transmission mode for the given time + * \param [IN] timeout Transmission timeout [ms] [0: continuous, others timeout] + */ +void SX1276SetTx( uint32_t timeout ); + +/*! + * \brief Writes the buffer contents to the SX1276 FIFO + * + * \param [IN] buffer Buffer containing data to be put on the FIFO. + * \param [IN] size Number of bytes to be written to the FIFO + */ +void SX1276WriteFifo( uint8_t *buffer, uint8_t size ); + +/*! + * \brief Reads the contents of the SX1276 FIFO + * + * \param [OUT] buffer Buffer where to copy the FIFO read data. + * \param [IN] size Number of bytes to be read from the FIFO + */ +void SX1276ReadFifo( uint8_t *buffer, uint8_t size ); + +/*! + * \brief Sets the SX1276 operating mode + * + * \param [IN] opMode New operating mode + */ +void SX1276SetOpMode( uint8_t opMode ); + +/* + * SX1276 DIO IRQ callback functions prototype + */ + +/*! + * \brief DIO 0 IRQ callback + */ +void SX1276OnDio0Irq( void ); + +/*! + * \brief DIO 1 IRQ callback + */ +void SX1276OnDio1Irq( void ); + +/*! + * \brief DIO 2 IRQ callback + */ +void SX1276OnDio2Irq( void ); + +/*! + * \brief DIO 3 IRQ callback + */ +void SX1276OnDio3Irq( void ); + +/*! + * \brief DIO 4 IRQ callback + */ +void SX1276OnDio4Irq( void ); + +/*! + * \brief DIO 5 IRQ callback + */ +void SX1276OnDio5Irq( void ); + +/*! + * \brief Tx & Rx timeout timer callback + */ +void SX1276OnTimeoutIrq( void ); + +/* + * Private global constants + */ + +/*! + * Radio hardware registers initialization + * + * \remark RADIO_INIT_REGISTERS_VALUE is defined in sx1276-board.h file + */ +const RadioRegisters_t RadioRegsInit[] = RADIO_INIT_REGISTERS_VALUE; + +/*! + * Constant values need to compute the RSSI value + */ +#define RSSI_OFFSET_LF -164 +#define RSSI_OFFSET_HF -157 + +/*! + * Precomputed FSK bandwidth registers values + */ +const FskBandwidth_t FskBandwidths[] = +{ + { 2600 , 0x17 }, + { 3100 , 0x0F }, + { 3900 , 0x07 }, + { 5200 , 0x16 }, + { 6300 , 0x0E }, + { 7800 , 0x06 }, + { 10400 , 0x15 }, + { 12500 , 0x0D }, + { 15600 , 0x05 }, + { 20800 , 0x14 }, + { 25000 , 0x0C }, + { 31300 , 0x04 }, + { 41700 , 0x13 }, + { 50000 , 0x0B }, + { 62500 , 0x03 }, + { 83333 , 0x12 }, + { 100000, 0x0A }, + { 125000, 0x02 }, + { 166700, 0x11 }, + { 200000, 0x09 }, + { 250000, 0x01 }, + { 300000, 0x00 }, // Invalid Bandwidth +}; + +/* + * Private global variables + */ + +/*! + * Radio callbacks variable + */ +static RadioEvents_t *RadioEvents; + +/*! + * Reception buffer + */ +static uint8_t RxTxBuffer[RX_BUFFER_SIZE]; + +/* + * Public global variables + */ + +/*! + * Radio hardware and global parameters + */ +SX1276_t SX1276; + +/*! + * Hardware DIO IRQ callback initialization + */ +DioIrqHandler *DioIrq[] = { SX1276OnDio0Irq, SX1276OnDio1Irq, + SX1276OnDio2Irq, SX1276OnDio3Irq, + SX1276OnDio4Irq, NULL }; + +/*! + * Tx and Rx timers + */ +TimerEvent_t TxTimeoutTimer; +TimerEvent_t RxTimeoutTimer; +TimerEvent_t RxTimeoutSyncWord; + +/* + * Radio driver functions implementation + */ + +void SX1276Init( RadioEvents_t *events ) +{ + uint8_t i; + + RadioEvents = events; + + // Initialize driver timeout timers + TimerInit( &TxTimeoutTimer, SX1276OnTimeoutIrq ); + TimerInit( &RxTimeoutTimer, SX1276OnTimeoutIrq ); + TimerInit( &RxTimeoutSyncWord, SX1276OnTimeoutIrq ); + + SX1276Reset( ); + + RxChainCalibration( ); + + SX1276SetOpMode( RF_OPMODE_SLEEP ); + + SX1276IoIrqInit( DioIrq ); + + for( i = 0; i < sizeof( RadioRegsInit ) / sizeof( RadioRegisters_t ); i++ ) + { + SX1276SetModem( RadioRegsInit[i].Modem ); + SX1276Write( RadioRegsInit[i].Addr, RadioRegsInit[i].Value ); + } + + SX1276SetModem( MODEM_FSK ); + + SX1276.Settings.State = RF_IDLE; +} + +RadioState_t SX1276GetStatus( void ) +{ + return SX1276.Settings.State; +} + +void SX1276SetChannel( uint32_t freq ) +{ + SX1276.Settings.Channel = freq; + freq = ( uint32_t )( ( double )freq / ( double )FREQ_STEP ); + SX1276Write( REG_FRFMSB, ( uint8_t )( ( freq >> 16 ) & 0xFF ) ); + SX1276Write( REG_FRFMID, ( uint8_t )( ( freq >> 8 ) & 0xFF ) ); + SX1276Write( REG_FRFLSB, ( uint8_t )( freq & 0xFF ) ); +#if 0 + printf("REG_FRFMSB =0x%02x \n", SX1276Read( REG_FRFMSB)); + printf("REG_FRFMID =0x%02x \n", SX1276Read( REG_FRFMID)); + printf("REG_FRFLSB =0x%02x \n", SX1276Read( REG_FRFLSB)); +#endif +} + +bool SX1276IsChannelFree( RadioModems_t modem, uint32_t freq, int16_t rssiThresh, uint32_t maxCarrierSenseTime ) +{ + bool status = true; + int16_t rssi = 0; + uint32_t carrierSenseTime = 0; + + SX1276SetModem( modem ); + + SX1276SetChannel( freq ); + + SX1276SetOpMode( RF_OPMODE_RECEIVER ); + + DelayMs( 1 ); + + carrierSenseTime = TimerGetCurrentTime( ); + + // Perform carrier sense for maxCarrierSenseTime + while( TimerGetElapsedTime( carrierSenseTime ) < maxCarrierSenseTime ) + { + rssi = SX1276ReadRssi( modem ); + + if( rssi > rssiThresh ) + { + status = false; + break; + } + } + SX1276SetSleep( ); + return status; +} + +uint32_t SX1276Random( void ) +{ + uint8_t i; + uint32_t rnd = 0; + + /* + * Radio setup for random number generation + */ + // Set LoRa modem ON + SX1276SetModem( MODEM_LORA ); + + // Disable LoRa modem interrupts + SX1276Write( REG_LR_IRQFLAGSMASK, RFLR_IRQFLAGS_RXTIMEOUT | + RFLR_IRQFLAGS_RXDONE | + RFLR_IRQFLAGS_PAYLOADCRCERROR | + RFLR_IRQFLAGS_VALIDHEADER | + RFLR_IRQFLAGS_TXDONE | + RFLR_IRQFLAGS_CADDONE | + RFLR_IRQFLAGS_FHSSCHANGEDCHANNEL | + RFLR_IRQFLAGS_CADDETECTED ); + + // Set radio in continuous reception + SX1276SetOpMode( RF_OPMODE_RECEIVER ); + + for( i = 0; i < 32; i++ ) + { + DelayMs( 1 ); + // Unfiltered RSSI value reading. Only takes the LSB value + rnd |= ( ( uint32_t )SX1276Read( REG_LR_RSSIWIDEBAND ) & 0x01 ) << i; + } + + SX1276SetSleep( ); + + return rnd; +} + +/*! + * Performs the Rx chain calibration for LF and HF bands + * \remark Must be called just after the reset so all registers are at their + * default values + */ +static void RxChainCalibration( void ) +{ + uint8_t regPaConfigInitVal; + uint32_t initialFreq; + + // Save context + regPaConfigInitVal = SX1276Read( REG_PACONFIG ); + initialFreq = ( double )( ( ( uint32_t )SX1276Read( REG_FRFMSB ) << 16 ) | + ( ( uint32_t )SX1276Read( REG_FRFMID ) << 8 ) | + ( ( uint32_t )SX1276Read( REG_FRFLSB ) ) ) * ( double )FREQ_STEP; + + // Cut the PA just in case, RFO output, power = -1 dBm + SX1276Write( REG_PACONFIG, 0x00 ); + + // Launch Rx chain calibration for LF band + SX1276Write( REG_IMAGECAL, ( SX1276Read( REG_IMAGECAL ) & RF_IMAGECAL_IMAGECAL_MASK ) | RF_IMAGECAL_IMAGECAL_START ); + while( ( SX1276Read( REG_IMAGECAL ) & RF_IMAGECAL_IMAGECAL_RUNNING ) == RF_IMAGECAL_IMAGECAL_RUNNING ) + { + } + + // Sets a Frequency in HF band + SX1276SetChannel( 868000000 ); + + // Launch Rx chain calibration for HF band + SX1276Write( REG_IMAGECAL, ( SX1276Read( REG_IMAGECAL ) & RF_IMAGECAL_IMAGECAL_MASK ) | RF_IMAGECAL_IMAGECAL_START ); + while( ( SX1276Read( REG_IMAGECAL ) & RF_IMAGECAL_IMAGECAL_RUNNING ) == RF_IMAGECAL_IMAGECAL_RUNNING ) + { + } + + // Restore context + SX1276Write( REG_PACONFIG, regPaConfigInitVal ); + SX1276SetChannel( initialFreq ); +} + +/*! + * Returns the known FSK bandwidth registers value + * + * \param [IN] bandwidth Bandwidth value in Hz + * \retval regValue Bandwidth register value. + */ +static uint8_t GetFskBandwidthRegValue( uint32_t bandwidth ) +{ + uint8_t i; + + for( i = 0; i < ( sizeof( FskBandwidths ) / sizeof( FskBandwidth_t ) ) - 1; i++ ) + { + if( ( bandwidth >= FskBandwidths[i].bandwidth ) && ( bandwidth < FskBandwidths[i + 1].bandwidth ) ) + { + return FskBandwidths[i].RegValue; + } + } + // ERROR: Value not found + while( 1 ); +} + +void SX1276SetRxConfig( RadioModems_t modem, uint32_t bandwidth, + uint32_t datarate, uint8_t coderate, + uint32_t bandwidthAfc, uint16_t preambleLen, + uint16_t symbTimeout, bool fixLen, + uint8_t payloadLen, + bool crcOn, bool freqHopOn, uint8_t hopPeriod, + bool iqInverted, bool rxContinuous ) +{ + SX1276SetModem( modem ); + + switch( modem ) + { + case MODEM_FSK: + { + SX1276.Settings.Fsk.Bandwidth = bandwidth; + SX1276.Settings.Fsk.Datarate = datarate; + SX1276.Settings.Fsk.BandwidthAfc = bandwidthAfc; + SX1276.Settings.Fsk.FixLen = fixLen; + SX1276.Settings.Fsk.PayloadLen = payloadLen; + SX1276.Settings.Fsk.CrcOn = crcOn; + SX1276.Settings.Fsk.IqInverted = iqInverted; + SX1276.Settings.Fsk.RxContinuous = rxContinuous; + SX1276.Settings.Fsk.PreambleLen = preambleLen; + SX1276.Settings.Fsk.RxSingleTimeout = ( uint32_t )( symbTimeout * ( ( 1.0 / ( double )datarate ) * 8.0 ) * 1000 ); + + datarate = ( uint16_t )( ( double )XTAL_FREQ / ( double )datarate ); + SX1276Write( REG_BITRATEMSB, ( uint8_t )( datarate >> 8 ) ); + SX1276Write( REG_BITRATELSB, ( uint8_t )( datarate & 0xFF ) ); + + SX1276Write( REG_RXBW, GetFskBandwidthRegValue( bandwidth ) ); + SX1276Write( REG_AFCBW, GetFskBandwidthRegValue( bandwidthAfc ) ); + + SX1276Write( REG_PREAMBLEMSB, ( uint8_t )( ( preambleLen >> 8 ) & 0xFF ) ); + SX1276Write( REG_PREAMBLELSB, ( uint8_t )( preambleLen & 0xFF ) ); + + if( fixLen == 1 ) + { + SX1276Write( REG_PAYLOADLENGTH, payloadLen ); + } + else + { + SX1276Write( REG_PAYLOADLENGTH, 0xFF ); // Set payload length to the maximum + } + + SX1276Write( REG_PACKETCONFIG1, + ( SX1276Read( REG_PACKETCONFIG1 ) & + RF_PACKETCONFIG1_CRC_MASK & + RF_PACKETCONFIG1_PACKETFORMAT_MASK ) | + ( ( fixLen == 1 ) ? RF_PACKETCONFIG1_PACKETFORMAT_FIXED : RF_PACKETCONFIG1_PACKETFORMAT_VARIABLE ) | + ( crcOn << 4 ) ); + SX1276Write( REG_PACKETCONFIG2, ( SX1276Read( REG_PACKETCONFIG2 ) | RF_PACKETCONFIG2_DATAMODE_PACKET ) ); + } + break; + case MODEM_LORA: + { + if( bandwidth > 2 ) + { + // Fatal error: When using LoRa modem only bandwidths 125, 250 and 500 kHz are supported + while( 1 ); + } + bandwidth += 7; + SX1276.Settings.LoRa.Bandwidth = bandwidth; + SX1276.Settings.LoRa.Datarate = datarate; + SX1276.Settings.LoRa.Coderate = coderate; + SX1276.Settings.LoRa.PreambleLen = preambleLen; + SX1276.Settings.LoRa.FixLen = fixLen; + SX1276.Settings.LoRa.PayloadLen = payloadLen; + SX1276.Settings.LoRa.CrcOn = crcOn; + SX1276.Settings.LoRa.FreqHopOn = freqHopOn; + SX1276.Settings.LoRa.HopPeriod = hopPeriod; + SX1276.Settings.LoRa.IqInverted = iqInverted; + SX1276.Settings.LoRa.RxContinuous = rxContinuous; + + if( datarate > 12 ) + { + datarate = 12; + } + else if( datarate < 6 ) + { + datarate = 6; + } + + if( ( ( bandwidth == 7 ) && ( ( datarate == 11 ) || ( datarate == 12 ) ) ) || + ( ( bandwidth == 8 ) && ( datarate == 12 ) ) ) + { + SX1276.Settings.LoRa.LowDatarateOptimize = 0x01; + } + else + { + SX1276.Settings.LoRa.LowDatarateOptimize = 0x00; + } + + SX1276Write( REG_LR_MODEMCONFIG1, + ( SX1276Read( REG_LR_MODEMCONFIG1 ) & + RFLR_MODEMCONFIG1_BW_MASK & + RFLR_MODEMCONFIG1_CODINGRATE_MASK & + RFLR_MODEMCONFIG1_IMPLICITHEADER_MASK ) | + ( bandwidth << 4 ) | ( coderate << 1 ) | + fixLen ); + + SX1276Write( REG_LR_MODEMCONFIG2, + ( SX1276Read( REG_LR_MODEMCONFIG2 ) & + RFLR_MODEMCONFIG2_SF_MASK & + RFLR_MODEMCONFIG2_RXPAYLOADCRC_MASK & + RFLR_MODEMCONFIG2_SYMBTIMEOUTMSB_MASK ) | + ( datarate << 4 ) | ( crcOn << 2 ) | + ( ( symbTimeout >> 8 ) & ~RFLR_MODEMCONFIG2_SYMBTIMEOUTMSB_MASK ) ); + + SX1276Write( REG_LR_MODEMCONFIG3, + ( SX1276Read( REG_LR_MODEMCONFIG3 ) & + RFLR_MODEMCONFIG3_LOWDATARATEOPTIMIZE_MASK ) | + ( SX1276.Settings.LoRa.LowDatarateOptimize << 3 ) ); + + SX1276Write( REG_LR_SYMBTIMEOUTLSB, ( uint8_t )( symbTimeout & 0xFF ) ); + + SX1276Write( REG_LR_PREAMBLEMSB, ( uint8_t )( ( preambleLen >> 8 ) & 0xFF ) ); + SX1276Write( REG_LR_PREAMBLELSB, ( uint8_t )( preambleLen & 0xFF ) ); + + if( fixLen == 1 ) + { + SX1276Write( REG_LR_PAYLOADLENGTH, payloadLen ); + } + + if( SX1276.Settings.LoRa.FreqHopOn == true ) + { + SX1276Write( REG_LR_PLLHOP, ( SX1276Read( REG_LR_PLLHOP ) & RFLR_PLLHOP_FASTHOP_MASK ) | RFLR_PLLHOP_FASTHOP_ON ); + SX1276Write( REG_LR_HOPPERIOD, SX1276.Settings.LoRa.HopPeriod ); + } + + if( ( bandwidth == 9 ) && ( SX1276.Settings.Channel > RF_MID_BAND_THRESH ) ) + { + // ERRATA 2.1 - Sensitivity Optimization with a 500 kHz Bandwidth + SX1276Write( REG_LR_TEST36, 0x02 ); + SX1276Write( REG_LR_TEST3A, 0x64 ); + } + else if( bandwidth == 9 ) + { + // ERRATA 2.1 - Sensitivity Optimization with a 500 kHz Bandwidth + SX1276Write( REG_LR_TEST36, 0x02 ); + SX1276Write( REG_LR_TEST3A, 0x7F ); + } + else + { + // ERRATA 2.1 - Sensitivity Optimization with a 500 kHz Bandwidth + SX1276Write( REG_LR_TEST36, 0x03 ); + } + + if( datarate == 6 ) + { + SX1276Write( REG_LR_DETECTOPTIMIZE, + ( SX1276Read( REG_LR_DETECTOPTIMIZE ) & + RFLR_DETECTIONOPTIMIZE_MASK ) | + RFLR_DETECTIONOPTIMIZE_SF6 ); + SX1276Write( REG_LR_DETECTIONTHRESHOLD, + RFLR_DETECTIONTHRESH_SF6 ); + } + else + { + SX1276Write( REG_LR_DETECTOPTIMIZE, + ( SX1276Read( REG_LR_DETECTOPTIMIZE ) & + RFLR_DETECTIONOPTIMIZE_MASK ) | + RFLR_DETECTIONOPTIMIZE_SF7_TO_SF12 ); + SX1276Write( REG_LR_DETECTIONTHRESHOLD, + RFLR_DETECTIONTHRESH_SF7_TO_SF12 ); + } + } + break; + } +} + +void SX1276SetTxConfig( RadioModems_t modem, int8_t power, uint32_t fdev, + uint32_t bandwidth, uint32_t datarate, + uint8_t coderate, uint16_t preambleLen, + bool fixLen, bool crcOn, bool freqHopOn, + uint8_t hopPeriod, bool iqInverted, uint32_t timeout ) +{ + SX1276SetModem( modem ); + + SX1276SetRfTxPower( power ); + + switch( modem ) + { + case MODEM_FSK: + { + SX1276.Settings.Fsk.Power = power; + SX1276.Settings.Fsk.Fdev = fdev; + SX1276.Settings.Fsk.Bandwidth = bandwidth; + SX1276.Settings.Fsk.Datarate = datarate; + SX1276.Settings.Fsk.PreambleLen = preambleLen; + SX1276.Settings.Fsk.FixLen = fixLen; + SX1276.Settings.Fsk.CrcOn = crcOn; + SX1276.Settings.Fsk.IqInverted = iqInverted; + SX1276.Settings.Fsk.TxTimeout = timeout; + + fdev = ( uint16_t )( ( double )fdev / ( double )FREQ_STEP ); + SX1276Write( REG_FDEVMSB, ( uint8_t )( fdev >> 8 ) ); + SX1276Write( REG_FDEVLSB, ( uint8_t )( fdev & 0xFF ) ); + + datarate = ( uint16_t )( ( double )XTAL_FREQ / ( double )datarate ); + SX1276Write( REG_BITRATEMSB, ( uint8_t )( datarate >> 8 ) ); + SX1276Write( REG_BITRATELSB, ( uint8_t )( datarate & 0xFF ) ); + + SX1276Write( REG_PREAMBLEMSB, ( preambleLen >> 8 ) & 0x00FF ); + SX1276Write( REG_PREAMBLELSB, preambleLen & 0xFF ); + + SX1276Write( REG_PACKETCONFIG1, + ( SX1276Read( REG_PACKETCONFIG1 ) & + RF_PACKETCONFIG1_CRC_MASK & + RF_PACKETCONFIG1_PACKETFORMAT_MASK ) | + ( ( fixLen == 1 ) ? RF_PACKETCONFIG1_PACKETFORMAT_FIXED : RF_PACKETCONFIG1_PACKETFORMAT_VARIABLE ) | + ( crcOn << 4 ) ); + SX1276Write( REG_PACKETCONFIG2, ( SX1276Read( REG_PACKETCONFIG2 ) | RF_PACKETCONFIG2_DATAMODE_PACKET ) ); + } + break; + case MODEM_LORA: + { + SX1276.Settings.LoRa.Power = power; + if( bandwidth > 2 ) + { + // Fatal error: When using LoRa modem only bandwidths 125, 250 and 500 kHz are supported + while( 1 ); + } + bandwidth += 7; + SX1276.Settings.LoRa.Bandwidth = bandwidth; + SX1276.Settings.LoRa.Datarate = datarate; + SX1276.Settings.LoRa.Coderate = coderate; + SX1276.Settings.LoRa.PreambleLen = preambleLen; + SX1276.Settings.LoRa.FixLen = fixLen; + SX1276.Settings.LoRa.FreqHopOn = freqHopOn; + SX1276.Settings.LoRa.HopPeriod = hopPeriod; + SX1276.Settings.LoRa.CrcOn = crcOn; + SX1276.Settings.LoRa.IqInverted = iqInverted; + SX1276.Settings.LoRa.TxTimeout = timeout; + + if( datarate > 12 ) + { + datarate = 12; + } + else if( datarate < 6 ) + { + datarate = 6; + } + if( ( ( bandwidth == 7 ) && ( ( datarate == 11 ) || ( datarate == 12 ) ) ) || + ( ( bandwidth == 8 ) && ( datarate == 12 ) ) ) + { + SX1276.Settings.LoRa.LowDatarateOptimize = 0x01; + } + else + { + SX1276.Settings.LoRa.LowDatarateOptimize = 0x00; + } + + if( SX1276.Settings.LoRa.FreqHopOn == true ) + { + SX1276Write( REG_LR_PLLHOP, ( SX1276Read( REG_LR_PLLHOP ) & RFLR_PLLHOP_FASTHOP_MASK ) | RFLR_PLLHOP_FASTHOP_ON ); + SX1276Write( REG_LR_HOPPERIOD, SX1276.Settings.LoRa.HopPeriod ); + } + + SX1276Write( REG_LR_MODEMCONFIG1, + ( SX1276Read( REG_LR_MODEMCONFIG1 ) & + RFLR_MODEMCONFIG1_BW_MASK & + RFLR_MODEMCONFIG1_CODINGRATE_MASK & + RFLR_MODEMCONFIG1_IMPLICITHEADER_MASK ) | + ( bandwidth << 4 ) | ( coderate << 1 ) | + fixLen ); + + SX1276Write( REG_LR_MODEMCONFIG2, + ( SX1276Read( REG_LR_MODEMCONFIG2 ) & + RFLR_MODEMCONFIG2_SF_MASK & + RFLR_MODEMCONFIG2_RXPAYLOADCRC_MASK ) | + ( datarate << 4 ) | ( crcOn << 2 ) ); + + SX1276Write( REG_LR_MODEMCONFIG3, + ( SX1276Read( REG_LR_MODEMCONFIG3 ) & + RFLR_MODEMCONFIG3_LOWDATARATEOPTIMIZE_MASK ) | + ( SX1276.Settings.LoRa.LowDatarateOptimize << 3 ) ); + + SX1276Write( REG_LR_PREAMBLEMSB, ( preambleLen >> 8 ) & 0x00FF ); + SX1276Write( REG_LR_PREAMBLELSB, preambleLen & 0xFF ); + + if( datarate == 6 ) + { + SX1276Write( REG_LR_DETECTOPTIMIZE, + ( SX1276Read( REG_LR_DETECTOPTIMIZE ) & + RFLR_DETECTIONOPTIMIZE_MASK ) | + RFLR_DETECTIONOPTIMIZE_SF6 ); + SX1276Write( REG_LR_DETECTIONTHRESHOLD, + RFLR_DETECTIONTHRESH_SF6 ); + } + else + { + SX1276Write( REG_LR_DETECTOPTIMIZE, + ( SX1276Read( REG_LR_DETECTOPTIMIZE ) & + RFLR_DETECTIONOPTIMIZE_MASK ) | + RFLR_DETECTIONOPTIMIZE_SF7_TO_SF12 ); + SX1276Write( REG_LR_DETECTIONTHRESHOLD, + RFLR_DETECTIONTHRESH_SF7_TO_SF12 ); + } + } + break; + } +} + +uint32_t SX1276GetTimeOnAir( RadioModems_t modem, uint8_t pktLen ) +{ + uint32_t airTime = 0; + + switch( modem ) + { + case MODEM_FSK: + { + airTime = round( ( 8 * ( SX1276.Settings.Fsk.PreambleLen + + ( ( SX1276Read( REG_SYNCCONFIG ) & ~RF_SYNCCONFIG_SYNCSIZE_MASK ) + 1 ) + + ( ( SX1276.Settings.Fsk.FixLen == 0x01 ) ? 0.0 : 1.0 ) + + ( ( ( SX1276Read( REG_PACKETCONFIG1 ) & ~RF_PACKETCONFIG1_ADDRSFILTERING_MASK ) != 0x00 ) ? 1.0 : 0 ) + + pktLen + + ( ( SX1276.Settings.Fsk.CrcOn == 0x01 ) ? 2.0 : 0 ) ) / + SX1276.Settings.Fsk.Datarate ) * 1000 ); + } + break; + case MODEM_LORA: + { + double bw = 0.0; + // REMARK: When using LoRa modem only bandwidths 125, 250 and 500 kHz are supported + switch( SX1276.Settings.LoRa.Bandwidth ) + { + //case 0: // 7.8 kHz + // bw = 7800; + // break; + //case 1: // 10.4 kHz + // bw = 10400; + // break; + //case 2: // 15.6 kHz + // bw = 15600; + // break; + //case 3: // 20.8 kHz + // bw = 20800; + // break; + //case 4: // 31.2 kHz + // bw = 31200; + // break; + //case 5: // 41.4 kHz + // bw = 41400; + // break; + //case 6: // 62.5 kHz + // bw = 62500; + // break; + case 7: // 125 kHz + bw = 125000; + break; + case 8: // 250 kHz + bw = 250000; + break; + case 9: // 500 kHz + bw = 500000; + break; + } + + // Symbol rate : time for one symbol (secs) + double rs = bw / ( 1 << SX1276.Settings.LoRa.Datarate ); + double ts = 1 / rs; + // time of preamble + double tPreamble = ( SX1276.Settings.LoRa.PreambleLen + 4.25 ) * ts; + // Symbol length of payload and time + double tmp = ceil( ( 8 * pktLen - 4 * SX1276.Settings.LoRa.Datarate + + 28 + 16 * SX1276.Settings.LoRa.CrcOn - + ( SX1276.Settings.LoRa.FixLen ? 20 : 0 ) ) / + ( double )( 4 * ( SX1276.Settings.LoRa.Datarate - + ( ( SX1276.Settings.LoRa.LowDatarateOptimize > 0 ) ? 2 : 0 ) ) ) ) * + ( SX1276.Settings.LoRa.Coderate + 4 ); + double nPayload = 8 + ( ( tmp > 0 ) ? tmp : 0 ); + double tPayload = nPayload * ts; + // Time on air + double tOnAir = tPreamble + tPayload; + // return ms secs + airTime = floor( tOnAir * 1000 + 0.999 ); + } + break; + } + return airTime; +} + +void SX1276Send( uint8_t *buffer, uint8_t size ) +{ + uint32_t txTimeout = 0; + + switch( SX1276.Settings.Modem ) + { + case MODEM_FSK: + { + SX1276.Settings.FskPacketHandler.NbBytes = 0; + SX1276.Settings.FskPacketHandler.Size = size; + + if( SX1276.Settings.Fsk.FixLen == false ) + { + SX1276WriteFifo( ( uint8_t* )&size, 1 ); + } + else + { + SX1276Write( REG_PAYLOADLENGTH, size ); + } + + if( ( size > 0 ) && ( size <= 64 ) ) + { + SX1276.Settings.FskPacketHandler.ChunkSize = size; + } + else + { + memcpy1( RxTxBuffer, buffer, size ); + SX1276.Settings.FskPacketHandler.ChunkSize = 32; + } + + // Write payload buffer + SX1276WriteFifo( buffer, SX1276.Settings.FskPacketHandler.ChunkSize ); + SX1276.Settings.FskPacketHandler.NbBytes += SX1276.Settings.FskPacketHandler.ChunkSize; + txTimeout = SX1276.Settings.Fsk.TxTimeout; + } + break; + case MODEM_LORA: + { + if( SX1276.Settings.LoRa.IqInverted == true ) + { + SX1276Write( REG_LR_INVERTIQ, ( ( SX1276Read( REG_LR_INVERTIQ ) & RFLR_INVERTIQ_TX_MASK & RFLR_INVERTIQ_RX_MASK ) | RFLR_INVERTIQ_RX_OFF | RFLR_INVERTIQ_TX_ON ) ); + SX1276Write( REG_LR_INVERTIQ2, RFLR_INVERTIQ2_ON ); + } + else + { + SX1276Write( REG_LR_INVERTIQ, ( ( SX1276Read( REG_LR_INVERTIQ ) & RFLR_INVERTIQ_TX_MASK & RFLR_INVERTIQ_RX_MASK ) | RFLR_INVERTIQ_RX_OFF | RFLR_INVERTIQ_TX_OFF ) ); + SX1276Write( REG_LR_INVERTIQ2, RFLR_INVERTIQ2_OFF ); + } + + SX1276.Settings.LoRaPacketHandler.Size = size; + + // Initializes the payload size + SX1276Write( REG_LR_PAYLOADLENGTH, size ); + + // Full buffer used for Tx + SX1276Write( REG_LR_FIFOTXBASEADDR, 0 ); + SX1276Write( REG_LR_FIFOADDRPTR, 0 ); + + // FIFO operations can not take place in Sleep mode + if( ( SX1276Read( REG_OPMODE ) & ~RF_OPMODE_MASK ) == RF_OPMODE_SLEEP ) + { + SX1276SetStby( ); + DelayMs( 1 ); + } + // Write payload buffer + SX1276WriteFifo( buffer, size ); + txTimeout = SX1276.Settings.LoRa.TxTimeout; + } + break; + } + + SX1276SetTx( txTimeout ); +} + +void SX1276SetSleep( void ) +{ + TimerStop( &RxTimeoutTimer ); + TimerStop( &TxTimeoutTimer ); + + SX1276SetOpMode( RF_OPMODE_SLEEP ); + SX1276.Settings.State = RF_IDLE; +} + +void SX1276SetStby( void ) +{ + TimerStop( &RxTimeoutTimer ); + TimerStop( &TxTimeoutTimer ); + + SX1276SetOpMode( RF_OPMODE_STANDBY ); + SX1276.Settings.State = RF_IDLE; +} + +void SX1276SetRx( uint32_t timeout ) +{ + bool rxContinuous = false; + + switch( SX1276.Settings.Modem ) + { + case MODEM_FSK: + { + rxContinuous = SX1276.Settings.Fsk.RxContinuous; + + // DIO0=PayloadReady + // DIO1=FifoLevel + // DIO2=SyncAddr + // DIO3=FifoEmpty + // DIO4=Preamble + // DIO5=ModeReady + SX1276Write( REG_DIOMAPPING1, ( SX1276Read( REG_DIOMAPPING1 ) & RF_DIOMAPPING1_DIO0_MASK & + RF_DIOMAPPING1_DIO1_MASK & + RF_DIOMAPPING1_DIO2_MASK ) | + RF_DIOMAPPING1_DIO0_00 | + RF_DIOMAPPING1_DIO1_00 | + RF_DIOMAPPING1_DIO2_11 ); + + SX1276Write( REG_DIOMAPPING2, ( SX1276Read( REG_DIOMAPPING2 ) & RF_DIOMAPPING2_DIO4_MASK & + RF_DIOMAPPING2_MAP_MASK ) | + RF_DIOMAPPING2_DIO4_11 | + RF_DIOMAPPING2_MAP_PREAMBLEDETECT ); + + SX1276.Settings.FskPacketHandler.FifoThresh = SX1276Read( REG_FIFOTHRESH ) & 0x3F; + + SX1276Write( REG_RXCONFIG, RF_RXCONFIG_AFCAUTO_ON | RF_RXCONFIG_AGCAUTO_ON | RF_RXCONFIG_RXTRIGER_PREAMBLEDETECT ); + + SX1276.Settings.FskPacketHandler.PreambleDetected = false; + SX1276.Settings.FskPacketHandler.SyncWordDetected = false; + SX1276.Settings.FskPacketHandler.NbBytes = 0; + SX1276.Settings.FskPacketHandler.Size = 0; + } + break; + case MODEM_LORA: + { + if( SX1276.Settings.LoRa.IqInverted == true ) + { + SX1276Write( REG_LR_INVERTIQ, ( ( SX1276Read( REG_LR_INVERTIQ ) & RFLR_INVERTIQ_TX_MASK & RFLR_INVERTIQ_RX_MASK ) | RFLR_INVERTIQ_RX_ON | RFLR_INVERTIQ_TX_OFF ) ); + SX1276Write( REG_LR_INVERTIQ2, RFLR_INVERTIQ2_ON ); + } + else + { + SX1276Write( REG_LR_INVERTIQ, ( ( SX1276Read( REG_LR_INVERTIQ ) & RFLR_INVERTIQ_TX_MASK & RFLR_INVERTIQ_RX_MASK ) | RFLR_INVERTIQ_RX_OFF | RFLR_INVERTIQ_TX_OFF ) ); + SX1276Write( REG_LR_INVERTIQ2, RFLR_INVERTIQ2_OFF ); + } + + // ERRATA 2.3 - Receiver Spurious Reception of a LoRa Signal + if( SX1276.Settings.LoRa.Bandwidth < 9 ) + { + SX1276Write( REG_LR_DETECTOPTIMIZE, SX1276Read( REG_LR_DETECTOPTIMIZE ) & 0x7F ); + SX1276Write( REG_LR_TEST30, 0x00 ); + switch( SX1276.Settings.LoRa.Bandwidth ) + { + case 0: // 7.8 kHz + SX1276Write( REG_LR_TEST2F, 0x48 ); + SX1276SetChannel(SX1276.Settings.Channel + 7810 ); + break; + case 1: // 10.4 kHz + SX1276Write( REG_LR_TEST2F, 0x44 ); + SX1276SetChannel(SX1276.Settings.Channel + 10420 ); + break; + case 2: // 15.6 kHz + SX1276Write( REG_LR_TEST2F, 0x44 ); + SX1276SetChannel(SX1276.Settings.Channel + 15620 ); + break; + case 3: // 20.8 kHz + SX1276Write( REG_LR_TEST2F, 0x44 ); + SX1276SetChannel(SX1276.Settings.Channel + 20830 ); + break; + case 4: // 31.2 kHz + SX1276Write( REG_LR_TEST2F, 0x44 ); + SX1276SetChannel(SX1276.Settings.Channel + 31250 ); + break; + case 5: // 41.4 kHz + SX1276Write( REG_LR_TEST2F, 0x44 ); + SX1276SetChannel(SX1276.Settings.Channel + 41670 ); + break; + case 6: // 62.5 kHz + SX1276Write( REG_LR_TEST2F, 0x40 ); + break; + case 7: // 125 kHz + SX1276Write( REG_LR_TEST2F, 0x40 ); + break; + case 8: // 250 kHz + SX1276Write( REG_LR_TEST2F, 0x40 ); + break; + } + } + else + { + SX1276Write( REG_LR_DETECTOPTIMIZE, SX1276Read( REG_LR_DETECTOPTIMIZE ) | 0x80 ); + } + + rxContinuous = SX1276.Settings.LoRa.RxContinuous; + + if( SX1276.Settings.LoRa.FreqHopOn == true ) + { + SX1276Write( REG_LR_IRQFLAGSMASK, //RFLR_IRQFLAGS_RXTIMEOUT | + //RFLR_IRQFLAGS_RXDONE | + //RFLR_IRQFLAGS_PAYLOADCRCERROR | + RFLR_IRQFLAGS_VALIDHEADER | + RFLR_IRQFLAGS_TXDONE | + RFLR_IRQFLAGS_CADDONE | + //RFLR_IRQFLAGS_FHSSCHANGEDCHANNEL | + RFLR_IRQFLAGS_CADDETECTED ); + + // DIO0=RxDone, DIO2=FhssChangeChannel + SX1276Write( REG_DIOMAPPING1, ( SX1276Read( REG_DIOMAPPING1 ) & RFLR_DIOMAPPING1_DIO0_MASK & RFLR_DIOMAPPING1_DIO2_MASK ) | RFLR_DIOMAPPING1_DIO0_00 | RFLR_DIOMAPPING1_DIO2_00 ); + } + else + { + SX1276Write( REG_LR_IRQFLAGSMASK, //RFLR_IRQFLAGS_RXTIMEOUT | + //RFLR_IRQFLAGS_RXDONE | + //RFLR_IRQFLAGS_PAYLOADCRCERROR | + RFLR_IRQFLAGS_VALIDHEADER | + RFLR_IRQFLAGS_TXDONE | + RFLR_IRQFLAGS_CADDONE | + RFLR_IRQFLAGS_FHSSCHANGEDCHANNEL | + RFLR_IRQFLAGS_CADDETECTED ); + + // DIO0=RxDone + SX1276Write( REG_DIOMAPPING1, ( SX1276Read( REG_DIOMAPPING1 ) & RFLR_DIOMAPPING1_DIO0_MASK ) | RFLR_DIOMAPPING1_DIO0_00 ); + } + SX1276Write( REG_LR_FIFORXBASEADDR, 0 ); + SX1276Write( REG_LR_FIFOADDRPTR, 0 ); + } + break; + } + + memset( RxTxBuffer, 0, ( size_t )RX_BUFFER_SIZE ); + + SX1276.Settings.State = RF_RX_RUNNING; + if( timeout != 0 ) + { + TimerSetValue( &RxTimeoutTimer, timeout ); + TimerStart( &RxTimeoutTimer ); + } + + if( SX1276.Settings.Modem == MODEM_FSK ) + { + SX1276SetOpMode( RF_OPMODE_RECEIVER ); + + if( rxContinuous == false ) + { + TimerSetValue( &RxTimeoutSyncWord, SX1276.Settings.Fsk.RxSingleTimeout ); + TimerStart( &RxTimeoutSyncWord ); + } + } + else + { + if( rxContinuous == true ) + { + SX1276SetOpMode( RFLR_OPMODE_RECEIVER ); + } + else + { + SX1276SetOpMode( RFLR_OPMODE_RECEIVER_SINGLE ); + } + } +} + +void SX1276SetTx( uint32_t timeout ) +{ + TimerSetValue( &TxTimeoutTimer, timeout ); + + switch( SX1276.Settings.Modem ) + { + case MODEM_FSK: + { + // DIO0=PacketSent + // DIO1=FifoEmpty + // DIO2=FifoFull + // DIO3=FifoEmpty + // DIO4=LowBat + // DIO5=ModeReady + SX1276Write( REG_DIOMAPPING1, ( SX1276Read( REG_DIOMAPPING1 ) & RF_DIOMAPPING1_DIO0_MASK & + RF_DIOMAPPING1_DIO1_MASK & + RF_DIOMAPPING1_DIO2_MASK ) | + RF_DIOMAPPING1_DIO1_01 ); + + SX1276Write( REG_DIOMAPPING2, ( SX1276Read( REG_DIOMAPPING2 ) & RF_DIOMAPPING2_DIO4_MASK & + RF_DIOMAPPING2_MAP_MASK ) ); + SX1276.Settings.FskPacketHandler.FifoThresh = SX1276Read( REG_FIFOTHRESH ) & 0x3F; + } + break; + case MODEM_LORA: + { + if( SX1276.Settings.LoRa.FreqHopOn == true ) + { + SX1276Write( REG_LR_IRQFLAGSMASK, RFLR_IRQFLAGS_RXTIMEOUT | + RFLR_IRQFLAGS_RXDONE | + RFLR_IRQFLAGS_PAYLOADCRCERROR | + RFLR_IRQFLAGS_VALIDHEADER | + //RFLR_IRQFLAGS_TXDONE | + RFLR_IRQFLAGS_CADDONE | + //RFLR_IRQFLAGS_FHSSCHANGEDCHANNEL | + RFLR_IRQFLAGS_CADDETECTED ); + + // DIO0=TxDone, DIO2=FhssChangeChannel + SX1276Write( REG_DIOMAPPING1, ( SX1276Read( REG_DIOMAPPING1 ) & RFLR_DIOMAPPING1_DIO0_MASK & RFLR_DIOMAPPING1_DIO2_MASK ) | RFLR_DIOMAPPING1_DIO0_01 | RFLR_DIOMAPPING1_DIO2_00 ); + } + else + { + SX1276Write( REG_LR_IRQFLAGSMASK, RFLR_IRQFLAGS_RXTIMEOUT | + RFLR_IRQFLAGS_RXDONE | + RFLR_IRQFLAGS_PAYLOADCRCERROR | + RFLR_IRQFLAGS_VALIDHEADER | + //RFLR_IRQFLAGS_TXDONE | + RFLR_IRQFLAGS_CADDONE | + RFLR_IRQFLAGS_FHSSCHANGEDCHANNEL | + RFLR_IRQFLAGS_CADDETECTED ); + + // DIO0=TxDone + SX1276Write( REG_DIOMAPPING1, ( SX1276Read( REG_DIOMAPPING1 ) & RFLR_DIOMAPPING1_DIO0_MASK ) | RFLR_DIOMAPPING1_DIO0_01 ); + } + } + break; + } + + SX1276.Settings.State = RF_TX_RUNNING; + TimerStart( &TxTimeoutTimer ); + SX1276SetOpMode( RF_OPMODE_TRANSMITTER ); +} + +void SX1276StartCad( void ) +{ + switch( SX1276.Settings.Modem ) + { + case MODEM_FSK: + { + + } + break; + case MODEM_LORA: + { + SX1276Write( REG_LR_IRQFLAGSMASK, RFLR_IRQFLAGS_RXTIMEOUT | + RFLR_IRQFLAGS_RXDONE | + RFLR_IRQFLAGS_PAYLOADCRCERROR | + RFLR_IRQFLAGS_VALIDHEADER | + RFLR_IRQFLAGS_TXDONE | + //RFLR_IRQFLAGS_CADDONE | + RFLR_IRQFLAGS_FHSSCHANGEDCHANNEL // | + //RFLR_IRQFLAGS_CADDETECTED + ); + + // DIO3=CADDone + SX1276Write( REG_DIOMAPPING1, ( SX1276Read( REG_DIOMAPPING1 ) & RFLR_DIOMAPPING1_DIO3_MASK ) | RFLR_DIOMAPPING1_DIO3_00 ); + + SX1276.Settings.State = RF_CAD; + SX1276SetOpMode( RFLR_OPMODE_CAD ); + } + break; + default: + break; + } +} + +void SX1276SetTxContinuousWave( uint32_t freq, int8_t power, uint16_t time ) +{ + uint32_t timeout = ( uint32_t )( time * 1000 ); + + SX1276SetChannel( freq ); + + SX1276SetTxConfig( MODEM_FSK, power, 0, 0, 4800, 0, 5, false, false, 0, 0, 0, timeout ); + + SX1276Write( REG_PACKETCONFIG2, ( SX1276Read( REG_PACKETCONFIG2 ) & RF_PACKETCONFIG2_DATAMODE_MASK ) ); + // Disable radio interrupts + SX1276Write( REG_DIOMAPPING1, RF_DIOMAPPING1_DIO0_11 | RF_DIOMAPPING1_DIO1_11 ); + SX1276Write( REG_DIOMAPPING2, RF_DIOMAPPING2_DIO4_10 | RF_DIOMAPPING2_DIO5_10 ); + + TimerSetValue( &TxTimeoutTimer, timeout ); + + SX1276.Settings.State = RF_TX_RUNNING; + TimerStart( &TxTimeoutTimer ); + SX1276SetOpMode( RF_OPMODE_TRANSMITTER ); +} + +int16_t SX1276ReadRssi( RadioModems_t modem ) +{ + int16_t rssi = 0; + + switch( modem ) + { + case MODEM_FSK: + rssi = -( SX1276Read( REG_RSSIVALUE ) >> 1 ); + break; + case MODEM_LORA: + if( SX1276.Settings.Channel > RF_MID_BAND_THRESH ) + { + rssi = RSSI_OFFSET_HF + SX1276Read( REG_LR_RSSIVALUE ); + } + else + { + rssi = RSSI_OFFSET_LF + SX1276Read( REG_LR_RSSIVALUE ); + } + break; + default: + rssi = -1; + break; + } + return rssi; +} + +void SX1276Reset( void ) +{ + // Set RESET pin to 0 + GpioInit( &SX1276.Reset, RADIO_RESET, PIN_OUTPUT, PIN_PUSH_PULL, PIN_NO_PULL, 0 ); + + // Wait 1 ms + DelayMs( 1 ); + + // Configure RESET as input + GpioInit( &SX1276.Reset, RADIO_RESET, PIN_INPUT, PIN_PUSH_PULL, PIN_NO_PULL, 1 ); + + // Wait 6 ms + DelayMs( 6 ); +} + +void SX1276SetOpMode( uint8_t opMode ) +{ + if( opMode == RF_OPMODE_SLEEP ) + { + SX1276SetAntSwLowPower( true ); + } + else + { + SX1276SetAntSwLowPower( false ); + SX1276SetAntSw( opMode ); + } + SX1276Write( REG_OPMODE, ( SX1276Read( REG_OPMODE ) & RF_OPMODE_MASK ) | opMode ); +} + +void SX1276SetModem( RadioModems_t modem ) +{ + if( ( SX1276Read( REG_OPMODE ) & RFLR_OPMODE_LONGRANGEMODE_ON ) != 0 ) + { + SX1276.Settings.Modem = MODEM_LORA; + } + else + { + SX1276.Settings.Modem = MODEM_FSK; + } + + if( SX1276.Settings.Modem == modem ) + { + return; + } + + SX1276.Settings.Modem = modem; + switch( SX1276.Settings.Modem ) + { + default: + case MODEM_FSK: + SX1276SetSleep( ); + SX1276Write( REG_OPMODE, ( SX1276Read( REG_OPMODE ) & RFLR_OPMODE_LONGRANGEMODE_MASK ) | RFLR_OPMODE_LONGRANGEMODE_OFF ); + + SX1276Write( REG_DIOMAPPING1, 0x00 ); + SX1276Write( REG_DIOMAPPING2, 0x30 ); // DIO5=ModeReady + break; + case MODEM_LORA: + SX1276SetSleep( ); + SX1276Write( REG_OPMODE, ( SX1276Read( REG_OPMODE ) & RFLR_OPMODE_LONGRANGEMODE_MASK ) | RFLR_OPMODE_LONGRANGEMODE_ON ); + + SX1276Write( REG_DIOMAPPING1, 0x00 ); + SX1276Write( REG_DIOMAPPING2, 0x00 ); + break; + } +} + +void SX1276Write( uint8_t addr, uint8_t data ) +{ + SX1276WriteBuffer( addr, &data, 1 ); +} + +uint8_t SX1276Read( uint8_t addr ) +{ + uint8_t data; + SX1276ReadBuffer( addr, &data, 1 ); + return data; +} + +void SX1276WriteBuffer( uint8_t addr, uint8_t *buffer, uint8_t size ) +{ + uint8_t i; + + //NSS = 0; + GpioWrite( &SX1276.Spi.Nss, 0 ); + + SpiInOut( &SX1276.Spi, addr | 0x80 ); + for( i = 0; i < size; i++ ) + { + SpiInOut( &SX1276.Spi, buffer[i] ); + } + + //NSS = 1; + GpioWrite( &SX1276.Spi.Nss, 1 ); +} + +void SX1276ReadBuffer( uint8_t addr, uint8_t *buffer, uint8_t size ) +{ + uint8_t i; + + //NSS = 0; + GpioWrite( &SX1276.Spi.Nss, 0 ); + + SpiInOut( &SX1276.Spi, addr & 0x7F ); + + for( i = 0; i < size; i++ ) + { + buffer[i] = SpiInOut( &SX1276.Spi, 0 ); + } + + //NSS = 1; + GpioWrite( &SX1276.Spi.Nss, 1 ); +} + +void SX1276WriteFifo( uint8_t *buffer, uint8_t size ) +{ + SX1276WriteBuffer( 0, buffer, size ); +} + +void SX1276ReadFifo( uint8_t *buffer, uint8_t size ) +{ + SX1276ReadBuffer( 0, buffer, size ); +} + +void SX1276SetMaxPayloadLength( RadioModems_t modem, uint8_t max ) +{ + SX1276SetModem( modem ); + + switch( modem ) + { + case MODEM_FSK: + if( SX1276.Settings.Fsk.FixLen == false ) + { + SX1276Write( REG_PAYLOADLENGTH, max ); + } + break; + case MODEM_LORA: + SX1276Write( REG_LR_PAYLOADMAXLENGTH, max ); + break; + } +} + +void SX1276SetPublicNetwork( bool enable ) +{ + SX1276SetModem( MODEM_LORA ); + SX1276.Settings.LoRa.PublicNetwork = enable; + if( enable == true ) + { + // Change LoRa modem SyncWord + SX1276Write( REG_LR_SYNCWORD, LORA_MAC_PUBLIC_SYNCWORD ); + } + else + { + // Change LoRa modem SyncWord + SX1276Write( REG_LR_SYNCWORD, LORA_MAC_PRIVATE_SYNCWORD ); + } +} + +void SX1276OnTimeoutIrq( void ) +{ + switch( SX1276.Settings.State ) + { + case RF_RX_RUNNING: + if( SX1276.Settings.Modem == MODEM_FSK ) + { + SX1276.Settings.FskPacketHandler.PreambleDetected = false; + SX1276.Settings.FskPacketHandler.SyncWordDetected = false; + SX1276.Settings.FskPacketHandler.NbBytes = 0; + SX1276.Settings.FskPacketHandler.Size = 0; + + // Clear Irqs + SX1276Write( REG_IRQFLAGS1, RF_IRQFLAGS1_RSSI | + RF_IRQFLAGS1_PREAMBLEDETECT | + RF_IRQFLAGS1_SYNCADDRESSMATCH ); + SX1276Write( REG_IRQFLAGS2, RF_IRQFLAGS2_FIFOOVERRUN ); + + if( SX1276.Settings.Fsk.RxContinuous == true ) + { + // Continuous mode restart Rx chain + SX1276Write( REG_RXCONFIG, SX1276Read( REG_RXCONFIG ) | RF_RXCONFIG_RESTARTRXWITHOUTPLLLOCK ); + TimerStart( &RxTimeoutSyncWord ); + } + else + { + SX1276.Settings.State = RF_IDLE; + TimerStop( &RxTimeoutSyncWord ); + } + } + if( ( RadioEvents != NULL ) && ( RadioEvents->RxTimeout != NULL ) ) + { + RadioEvents->RxTimeout( ); + } + break; + case RF_TX_RUNNING: + // Tx timeout shouldn't happen. + // But it has been observed that when it happens it is a result of a corrupted SPI transfer + // it depends on the platform design. + // + // The workaround is to put the radio in a known state. Thus, we re-initialize it. + + // BEGIN WORKAROUND + + // Reset the radio + SX1276Reset( ); + + // Calibrate Rx chain + RxChainCalibration( ); + + // Initialize radio default values + SX1276SetOpMode( RF_OPMODE_SLEEP ); + + for( uint8_t i = 0; i < sizeof( RadioRegsInit ) / sizeof( RadioRegisters_t ); i++ ) + { + SX1276SetModem( RadioRegsInit[i].Modem ); + SX1276Write( RadioRegsInit[i].Addr, RadioRegsInit[i].Value ); + } + SX1276SetModem( MODEM_FSK ); + + // Restore previous network type setting. + SX1276SetPublicNetwork( SX1276.Settings.LoRa.PublicNetwork ); + // END WORKAROUND + + SX1276.Settings.State = RF_IDLE; + if( ( RadioEvents != NULL ) && ( RadioEvents->TxTimeout != NULL ) ) + { + RadioEvents->TxTimeout( ); + } + break; + default: + break; + } +} + +void SX1276OnDio0Irq( void ) +{ + volatile uint8_t irqFlags = 0; + + switch( SX1276.Settings.State ) + { + case RF_RX_RUNNING: + //TimerStop( &RxTimeoutTimer ); + // RxDone interrupt + switch( SX1276.Settings.Modem ) + { + case MODEM_FSK: + if( SX1276.Settings.Fsk.CrcOn == true ) + { + irqFlags = SX1276Read( REG_IRQFLAGS2 ); + if( ( irqFlags & RF_IRQFLAGS2_CRCOK ) != RF_IRQFLAGS2_CRCOK ) + { + // Clear Irqs + SX1276Write( REG_IRQFLAGS1, RF_IRQFLAGS1_RSSI | + RF_IRQFLAGS1_PREAMBLEDETECT | + RF_IRQFLAGS1_SYNCADDRESSMATCH ); + SX1276Write( REG_IRQFLAGS2, RF_IRQFLAGS2_FIFOOVERRUN ); + + TimerStop( &RxTimeoutTimer ); + + if( SX1276.Settings.Fsk.RxContinuous == false ) + { + TimerStop( &RxTimeoutSyncWord ); + SX1276.Settings.State = RF_IDLE; + } + else + { + // Continuous mode restart Rx chain + SX1276Write( REG_RXCONFIG, SX1276Read( REG_RXCONFIG ) | RF_RXCONFIG_RESTARTRXWITHOUTPLLLOCK ); + TimerStart( &RxTimeoutSyncWord ); + } + + if( ( RadioEvents != NULL ) && ( RadioEvents->RxError != NULL ) ) + { + RadioEvents->RxError( ); + } + SX1276.Settings.FskPacketHandler.PreambleDetected = false; + SX1276.Settings.FskPacketHandler.SyncWordDetected = false; + SX1276.Settings.FskPacketHandler.NbBytes = 0; + SX1276.Settings.FskPacketHandler.Size = 0; + break; + } + } + + // Read received packet size + if( ( SX1276.Settings.FskPacketHandler.Size == 0 ) && ( SX1276.Settings.FskPacketHandler.NbBytes == 0 ) ) + { + if( SX1276.Settings.Fsk.FixLen == false ) + { + SX1276ReadFifo( ( uint8_t* )&SX1276.Settings.FskPacketHandler.Size, 1 ); + } + else + { + SX1276.Settings.FskPacketHandler.Size = SX1276Read( REG_PAYLOADLENGTH ); + } + SX1276ReadFifo( RxTxBuffer + SX1276.Settings.FskPacketHandler.NbBytes, SX1276.Settings.FskPacketHandler.Size - SX1276.Settings.FskPacketHandler.NbBytes ); + SX1276.Settings.FskPacketHandler.NbBytes += ( SX1276.Settings.FskPacketHandler.Size - SX1276.Settings.FskPacketHandler.NbBytes ); + } + else + { + SX1276ReadFifo( RxTxBuffer + SX1276.Settings.FskPacketHandler.NbBytes, SX1276.Settings.FskPacketHandler.Size - SX1276.Settings.FskPacketHandler.NbBytes ); + SX1276.Settings.FskPacketHandler.NbBytes += ( SX1276.Settings.FskPacketHandler.Size - SX1276.Settings.FskPacketHandler.NbBytes ); + } + + TimerStop( &RxTimeoutTimer ); + + if( SX1276.Settings.Fsk.RxContinuous == false ) + { + SX1276.Settings.State = RF_IDLE; + TimerStop( &RxTimeoutSyncWord ); + } + else + { + // Continuous mode restart Rx chain + SX1276Write( REG_RXCONFIG, SX1276Read( REG_RXCONFIG ) | RF_RXCONFIG_RESTARTRXWITHOUTPLLLOCK ); + TimerStart( &RxTimeoutSyncWord ); + } + + if( ( RadioEvents != NULL ) && ( RadioEvents->RxDone != NULL ) ) + { + RadioEvents->RxDone( RxTxBuffer, SX1276.Settings.FskPacketHandler.Size, SX1276.Settings.FskPacketHandler.RssiValue, 0 ); + } + SX1276.Settings.FskPacketHandler.PreambleDetected = false; + SX1276.Settings.FskPacketHandler.SyncWordDetected = false; + SX1276.Settings.FskPacketHandler.NbBytes = 0; + SX1276.Settings.FskPacketHandler.Size = 0; + break; + case MODEM_LORA: + { + int8_t snr = 0; + + // Clear Irq + SX1276Write( REG_LR_IRQFLAGS, RFLR_IRQFLAGS_RXDONE ); + + irqFlags = SX1276Read( REG_LR_IRQFLAGS ); + if( ( irqFlags & RFLR_IRQFLAGS_PAYLOADCRCERROR_MASK ) == RFLR_IRQFLAGS_PAYLOADCRCERROR ) + { + // Clear Irq + SX1276Write( REG_LR_IRQFLAGS, RFLR_IRQFLAGS_PAYLOADCRCERROR ); + + if( SX1276.Settings.LoRa.RxContinuous == false ) + { + SX1276.Settings.State = RF_IDLE; + } + TimerStop( &RxTimeoutTimer ); + + if( ( RadioEvents != NULL ) && ( RadioEvents->RxError != NULL ) ) + { + RadioEvents->RxError( ); + } + break; + } + + SX1276.Settings.LoRaPacketHandler.SnrValue = SX1276Read( REG_LR_PKTSNRVALUE ); + if( SX1276.Settings.LoRaPacketHandler.SnrValue & 0x80 ) // The SNR sign bit is 1 + { + // Invert and divide by 4 + snr = ( ( ~SX1276.Settings.LoRaPacketHandler.SnrValue + 1 ) & 0xFF ) >> 2; + snr = -snr; + } + else + { + // Divide by 4 + snr = ( SX1276.Settings.LoRaPacketHandler.SnrValue & 0xFF ) >> 2; + } + + int16_t rssi = SX1276Read( REG_LR_PKTRSSIVALUE ); + if( snr < 0 ) + { + if( SX1276.Settings.Channel > RF_MID_BAND_THRESH ) + { + SX1276.Settings.LoRaPacketHandler.RssiValue = RSSI_OFFSET_HF + rssi + ( rssi >> 4 ) + + snr; + } + else + { + SX1276.Settings.LoRaPacketHandler.RssiValue = RSSI_OFFSET_LF + rssi + ( rssi >> 4 ) + + snr; + } + } + else + { + if( SX1276.Settings.Channel > RF_MID_BAND_THRESH ) + { + SX1276.Settings.LoRaPacketHandler.RssiValue = RSSI_OFFSET_HF + rssi + ( rssi >> 4 ); + } + else + { + SX1276.Settings.LoRaPacketHandler.RssiValue = RSSI_OFFSET_LF + rssi + ( rssi >> 4 ); + } + } + + SX1276.Settings.LoRaPacketHandler.Size = SX1276Read( REG_LR_RXNBBYTES ); + SX1276Write( REG_LR_FIFOADDRPTR, SX1276Read( REG_LR_FIFORXCURRENTADDR ) ); + SX1276ReadFifo( RxTxBuffer, SX1276.Settings.LoRaPacketHandler.Size ); + + if( SX1276.Settings.LoRa.RxContinuous == false ) + { + SX1276.Settings.State = RF_IDLE; + } + TimerStop( &RxTimeoutTimer ); + + if( ( RadioEvents != NULL ) && ( RadioEvents->RxDone != NULL ) ) + { + RadioEvents->RxDone( RxTxBuffer, SX1276.Settings.LoRaPacketHandler.Size, SX1276.Settings.LoRaPacketHandler.RssiValue, SX1276.Settings.LoRaPacketHandler.SnrValue ); + } + } + break; + default: + break; + } + break; + case RF_TX_RUNNING: + TimerStop( &TxTimeoutTimer ); + // TxDone interrupt + switch( SX1276.Settings.Modem ) + { + case MODEM_LORA: + // Clear Irq + SX1276Write( REG_LR_IRQFLAGS, RFLR_IRQFLAGS_TXDONE ); + // Intentional fall through + case MODEM_FSK: + default: + SX1276.Settings.State = RF_IDLE; + if( ( RadioEvents != NULL ) && ( RadioEvents->TxDone != NULL ) ) + { + RadioEvents->TxDone( ); + } + break; + } + break; + default: + break; + } +} + +void SX1276OnDio1Irq( void ) +{ + switch( SX1276.Settings.State ) + { + case RF_RX_RUNNING: + switch( SX1276.Settings.Modem ) + { + case MODEM_FSK: + // FifoLevel interrupt + // Read received packet size + if( ( SX1276.Settings.FskPacketHandler.Size == 0 ) && ( SX1276.Settings.FskPacketHandler.NbBytes == 0 ) ) + { + if( SX1276.Settings.Fsk.FixLen == false ) + { + SX1276ReadFifo( ( uint8_t* )&SX1276.Settings.FskPacketHandler.Size, 1 ); + } + else + { + SX1276.Settings.FskPacketHandler.Size = SX1276Read( REG_PAYLOADLENGTH ); + } + } + + if( ( SX1276.Settings.FskPacketHandler.Size - SX1276.Settings.FskPacketHandler.NbBytes ) > SX1276.Settings.FskPacketHandler.FifoThresh ) + { + SX1276ReadFifo( ( RxTxBuffer + SX1276.Settings.FskPacketHandler.NbBytes ), SX1276.Settings.FskPacketHandler.FifoThresh ); + SX1276.Settings.FskPacketHandler.NbBytes += SX1276.Settings.FskPacketHandler.FifoThresh; + } + else + { + SX1276ReadFifo( ( RxTxBuffer + SX1276.Settings.FskPacketHandler.NbBytes ), SX1276.Settings.FskPacketHandler.Size - SX1276.Settings.FskPacketHandler.NbBytes ); + SX1276.Settings.FskPacketHandler.NbBytes += ( SX1276.Settings.FskPacketHandler.Size - SX1276.Settings.FskPacketHandler.NbBytes ); + } + break; + case MODEM_LORA: + // Sync time out + TimerStop( &RxTimeoutTimer ); + // Clear Irq + SX1276Write( REG_LR_IRQFLAGS, RFLR_IRQFLAGS_RXTIMEOUT ); + + SX1276.Settings.State = RF_IDLE; + if( ( RadioEvents != NULL ) && ( RadioEvents->RxTimeout != NULL ) ) + { + RadioEvents->RxTimeout( ); + } + break; + default: + break; + } + break; + case RF_TX_RUNNING: + switch( SX1276.Settings.Modem ) + { + case MODEM_FSK: + // FifoEmpty interrupt + if( ( SX1276.Settings.FskPacketHandler.Size - SX1276.Settings.FskPacketHandler.NbBytes ) > SX1276.Settings.FskPacketHandler.ChunkSize ) + { + SX1276WriteFifo( ( RxTxBuffer + SX1276.Settings.FskPacketHandler.NbBytes ), SX1276.Settings.FskPacketHandler.ChunkSize ); + SX1276.Settings.FskPacketHandler.NbBytes += SX1276.Settings.FskPacketHandler.ChunkSize; + } + else + { + // Write the last chunk of data + SX1276WriteFifo( RxTxBuffer + SX1276.Settings.FskPacketHandler.NbBytes, SX1276.Settings.FskPacketHandler.Size - SX1276.Settings.FskPacketHandler.NbBytes ); + SX1276.Settings.FskPacketHandler.NbBytes += SX1276.Settings.FskPacketHandler.Size - SX1276.Settings.FskPacketHandler.NbBytes; + } + break; + case MODEM_LORA: + break; + default: + break; + } + break; + default: + break; + } +} + +void SX1276OnDio2Irq( void ) +{ + switch( SX1276.Settings.State ) + { + case RF_RX_RUNNING: + switch( SX1276.Settings.Modem ) + { + case MODEM_FSK: + // Checks if DIO4 is connected. If it is not PreambleDetected is set to true. + if( SX1276.DIO4.port == NULL ) + { + SX1276.Settings.FskPacketHandler.PreambleDetected = true; + } + + if( ( SX1276.Settings.FskPacketHandler.PreambleDetected == true ) && ( SX1276.Settings.FskPacketHandler.SyncWordDetected == false ) ) + { + TimerStop( &RxTimeoutSyncWord ); + + SX1276.Settings.FskPacketHandler.SyncWordDetected = true; + + SX1276.Settings.FskPacketHandler.RssiValue = -( SX1276Read( REG_RSSIVALUE ) >> 1 ); + + SX1276.Settings.FskPacketHandler.AfcValue = ( int32_t )( double )( ( ( uint16_t )SX1276Read( REG_AFCMSB ) << 8 ) | + ( uint16_t )SX1276Read( REG_AFCLSB ) ) * + ( double )FREQ_STEP; + SX1276.Settings.FskPacketHandler.RxGain = ( SX1276Read( REG_LNA ) >> 5 ) & 0x07; + } + break; + case MODEM_LORA: + if( SX1276.Settings.LoRa.FreqHopOn == true ) + { + // Clear Irq + SX1276Write( REG_LR_IRQFLAGS, RFLR_IRQFLAGS_FHSSCHANGEDCHANNEL ); + + if( ( RadioEvents != NULL ) && ( RadioEvents->FhssChangeChannel != NULL ) ) + { + RadioEvents->FhssChangeChannel( ( SX1276Read( REG_LR_HOPCHANNEL ) & RFLR_HOPCHANNEL_CHANNEL_MASK ) ); + } + } + break; + default: + break; + } + break; + case RF_TX_RUNNING: + switch( SX1276.Settings.Modem ) + { + case MODEM_FSK: + break; + case MODEM_LORA: + if( SX1276.Settings.LoRa.FreqHopOn == true ) + { + // Clear Irq + SX1276Write( REG_LR_IRQFLAGS, RFLR_IRQFLAGS_FHSSCHANGEDCHANNEL ); + + if( ( RadioEvents != NULL ) && ( RadioEvents->FhssChangeChannel != NULL ) ) + { + RadioEvents->FhssChangeChannel( ( SX1276Read( REG_LR_HOPCHANNEL ) & RFLR_HOPCHANNEL_CHANNEL_MASK ) ); + } + } + break; + default: + break; + } + break; + default: + break; + } +} + +void SX1276OnDio3Irq( void ) +{ + switch( SX1276.Settings.Modem ) + { + case MODEM_FSK: + break; + case MODEM_LORA: + if( ( SX1276Read( REG_LR_IRQFLAGS ) & RFLR_IRQFLAGS_CADDETECTED ) == RFLR_IRQFLAGS_CADDETECTED ) + { + // Clear Irq + SX1276Write( REG_LR_IRQFLAGS, RFLR_IRQFLAGS_CADDETECTED | RFLR_IRQFLAGS_CADDONE ); + if( ( RadioEvents != NULL ) && ( RadioEvents->CadDone != NULL ) ) + { + RadioEvents->CadDone( true ); + } + } + else + { + // Clear Irq + SX1276Write( REG_LR_IRQFLAGS, RFLR_IRQFLAGS_CADDONE ); + if( ( RadioEvents != NULL ) && ( RadioEvents->CadDone != NULL ) ) + { + RadioEvents->CadDone( false ); + } + } + break; + default: + break; + } +} + +void SX1276OnDio4Irq( void ) +{ + switch( SX1276.Settings.Modem ) + { + case MODEM_FSK: + { + if( SX1276.Settings.FskPacketHandler.PreambleDetected == false ) + { + SX1276.Settings.FskPacketHandler.PreambleDetected = true; + } + } + break; + case MODEM_LORA: + break; + default: + break; + } +} + +void SX1276OnDio5Irq( void ) +{ + switch( SX1276.Settings.Modem ) + { + case MODEM_FSK: + break; + case MODEM_LORA: + break; + default: + break; + } +} diff --git a/lib/radio/sx1276/sx1276.h b/lib/radio/sx1276/sx1276.h new file mode 100755 index 0000000..a02762d --- /dev/null +++ b/lib/radio/sx1276/sx1276.h @@ -0,0 +1,407 @@ +/* + / _____) _ | | +( (____ _____ ____ _| |_ _____ ____| |__ + \____ \| ___ | (_ _) ___ |/ ___) _ \ + _____) ) ____| | | || |_| ____( (___| | | | +(______/|_____)_|_|_| \__)_____)\____)_| |_| + (C)2013 Semtech + +Description: Generic SX1276 driver implementation + +License: Revised BSD License, see LICENSE.TXT file include in the project + +Maintainer: Miguel Luis and Gregory Cristian +*/ +#ifndef __SX1276_H__ +#define __SX1276_H__ + +#include "sx1276Regs-Fsk.h" +#include "sx1276Regs-LoRa.h" + +/*! + * Radio wake-up time from sleep + */ +#define RADIO_WAKEUP_TIME 1 // [ms] + +/*! + * Sync word for Private LoRa networks + */ +#define LORA_MAC_PRIVATE_SYNCWORD 0x12 + +/*! + * Sync word for Public LoRa networks + */ +#define LORA_MAC_PUBLIC_SYNCWORD 0x34 + +/*! + * Radio FSK modem parameters + */ +typedef struct +{ + int8_t Power; + uint32_t Fdev; + uint32_t Bandwidth; + uint32_t BandwidthAfc; + uint32_t Datarate; + uint16_t PreambleLen; + bool FixLen; + uint8_t PayloadLen; + bool CrcOn; + bool IqInverted; + bool RxContinuous; + uint32_t TxTimeout; + uint32_t RxSingleTimeout; +}RadioFskSettings_t; + +/*! + * Radio FSK packet handler state + */ +typedef struct +{ + uint8_t PreambleDetected; + uint8_t SyncWordDetected; + int8_t RssiValue; + int32_t AfcValue; + uint8_t RxGain; + uint16_t Size; + uint16_t NbBytes; + uint8_t FifoThresh; + uint8_t ChunkSize; +}RadioFskPacketHandler_t; + +/*! + * Radio LoRa modem parameters + */ +typedef struct +{ + int8_t Power; + uint32_t Bandwidth; + uint32_t Datarate; + bool LowDatarateOptimize; + uint8_t Coderate; + uint16_t PreambleLen; + bool FixLen; + uint8_t PayloadLen; + bool CrcOn; + bool FreqHopOn; + uint8_t HopPeriod; + bool IqInverted; + bool RxContinuous; + uint32_t TxTimeout; + bool PublicNetwork; +}RadioLoRaSettings_t; + +/*! + * Radio LoRa packet handler state + */ +typedef struct +{ + int8_t SnrValue; + int16_t RssiValue; + uint8_t Size; +}RadioLoRaPacketHandler_t; + +/*! + * Radio Settings + */ +typedef struct +{ + RadioState_t State; + RadioModems_t Modem; + uint32_t Channel; + RadioFskSettings_t Fsk; + RadioFskPacketHandler_t FskPacketHandler; + RadioLoRaSettings_t LoRa; + RadioLoRaPacketHandler_t LoRaPacketHandler; +}RadioSettings_t; + +/*! + * Radio hardware and global parameters + */ +typedef struct SX1276_s +{ + Gpio_t Reset; + Gpio_t Xtal; + Gpio_t DIO0; + Gpio_t DIO1; + Gpio_t DIO2; + Gpio_t DIO3; + Gpio_t DIO4; + Gpio_t DIO5; + Spi_t Spi; + RadioSettings_t Settings; +}SX1276_t; + +/*! + * Hardware IO IRQ callback function definition + */ +typedef void ( DioIrqHandler )( void ); + +/*! + * SX1276 definitions + */ +#define XTAL_FREQ 32000000 +#define FREQ_STEP 61.03515625 + +#define RX_BUFFER_SIZE 256 + +/*! + * ============================================================================ + * Public functions prototypes + * ============================================================================ + */ + +/*! + * \brief Initializes the radio + * + * \param [IN] events Structure containing the driver callback functions + */ +void SX1276Init( RadioEvents_t *events ); + +/*! + * Return current radio status + * + * \param status Radio status.[RF_IDLE, RF_RX_RUNNING, RF_TX_RUNNING] + */ +RadioState_t SX1276GetStatus( void ); + +/*! + * \brief Configures the radio with the given modem + * + * \param [IN] modem Modem to be used [0: FSK, 1: LoRa] + */ +void SX1276SetModem( RadioModems_t modem ); + +/*! + * \brief Sets the channel configuration + * + * \param [IN] freq Channel RF frequency + */ +void SX1276SetChannel( uint32_t freq ); + +/*! + * \brief Checks if the channel is free for the given time + * + * \param [IN] modem Radio modem to be used [0: FSK, 1: LoRa] + * \param [IN] freq Channel RF frequency + * \param [IN] rssiThresh RSSI threshold + * \param [IN] maxCarrierSenseTime Max time while the RSSI is measured + * + * \retval isFree [true: Channel is free, false: Channel is not free] + */ +bool SX1276IsChannelFree( RadioModems_t modem, uint32_t freq, int16_t rssiThresh, uint32_t maxCarrierSenseTime ); + +/*! + * \brief Generates a 32 bits random value based on the RSSI readings + * + * \remark This function sets the radio in LoRa modem mode and disables + * all interrupts. + * After calling this function either SX1276SetRxConfig or + * SX1276SetTxConfig functions must be called. + * + * \retval randomValue 32 bits random value + */ +uint32_t SX1276Random( void ); + +/*! + * \brief Sets the reception parameters + * + * \remark When using LoRa modem only bandwidths 125, 250 and 500 kHz are supported + * + * \param [IN] modem Radio modem to be used [0: FSK, 1: LoRa] + * \param [IN] bandwidth Sets the bandwidth + * FSK : >= 2600 and <= 250000 Hz + * LoRa: [0: 125 kHz, 1: 250 kHz, + * 2: 500 kHz, 3: Reserved] + * \param [IN] datarate Sets the Datarate + * FSK : 600..300000 bits/s + * LoRa: [6: 64, 7: 128, 8: 256, 9: 512, + * 10: 1024, 11: 2048, 12: 4096 chips] + * \param [IN] coderate Sets the coding rate (LoRa only) + * FSK : N/A ( set to 0 ) + * LoRa: [1: 4/5, 2: 4/6, 3: 4/7, 4: 4/8] + * \param [IN] bandwidthAfc Sets the AFC Bandwidth (FSK only) + * FSK : >= 2600 and <= 250000 Hz + * LoRa: N/A ( set to 0 ) + * \param [IN] preambleLen Sets the Preamble length + * FSK : Number of bytes + * LoRa: Length in symbols (the hardware adds 4 more symbols) + * \param [IN] symbTimeout Sets the RxSingle timeout value + * FSK : timeout number of bytes + * LoRa: timeout in symbols + * \param [IN] fixLen Fixed length packets [0: variable, 1: fixed] + * \param [IN] payloadLen Sets payload length when fixed length is used + * \param [IN] crcOn Enables/Disables the CRC [0: OFF, 1: ON] + * \param [IN] freqHopOn Enables disables the intra-packet frequency hopping + * FSK : N/A ( set to 0 ) + * LoRa: [0: OFF, 1: ON] + * \param [IN] hopPeriod Number of symbols between each hop + * FSK : N/A ( set to 0 ) + * LoRa: Number of symbols + * \param [IN] iqInverted Inverts IQ signals (LoRa only) + * FSK : N/A ( set to 0 ) + * LoRa: [0: not inverted, 1: inverted] + * \param [IN] rxContinuous Sets the reception in continuous mode + * [false: single mode, true: continuous mode] + */ +void SX1276SetRxConfig( RadioModems_t modem, uint32_t bandwidth, + uint32_t datarate, uint8_t coderate, + uint32_t bandwidthAfc, uint16_t preambleLen, + uint16_t symbTimeout, bool fixLen, + uint8_t payloadLen, + bool crcOn, bool freqHopOn, uint8_t hopPeriod, + bool iqInverted, bool rxContinuous ); + +/*! + * \brief Sets the transmission parameters + * + * \remark When using LoRa modem only bandwidths 125, 250 and 500 kHz are supported + * + * \param [IN] modem Radio modem to be used [0: FSK, 1: LoRa] + * \param [IN] power Sets the output power [dBm] + * \param [IN] fdev Sets the frequency deviation (FSK only) + * FSK : [Hz] + * LoRa: 0 + * \param [IN] bandwidth Sets the bandwidth (LoRa only) + * FSK : 0 + * LoRa: [0: 125 kHz, 1: 250 kHz, + * 2: 500 kHz, 3: Reserved] + * \param [IN] datarate Sets the Datarate + * FSK : 600..300000 bits/s + * LoRa: [6: 64, 7: 128, 8: 256, 9: 512, + * 10: 1024, 11: 2048, 12: 4096 chips] + * \param [IN] coderate Sets the coding rate (LoRa only) + * FSK : N/A ( set to 0 ) + * LoRa: [1: 4/5, 2: 4/6, 3: 4/7, 4: 4/8] + * \param [IN] preambleLen Sets the preamble length + * FSK : Number of bytes + * LoRa: Length in symbols (the hardware adds 4 more symbols) + * \param [IN] fixLen Fixed length packets [0: variable, 1: fixed] + * \param [IN] crcOn Enables disables the CRC [0: OFF, 1: ON] + * \param [IN] freqHopOn Enables disables the intra-packet frequency hopping + * FSK : N/A ( set to 0 ) + * LoRa: [0: OFF, 1: ON] + * \param [IN] hopPeriod Number of symbols between each hop + * FSK : N/A ( set to 0 ) + * LoRa: Number of symbols + * \param [IN] iqInverted Inverts IQ signals (LoRa only) + * FSK : N/A ( set to 0 ) + * LoRa: [0: not inverted, 1: inverted] + * \param [IN] timeout Transmission timeout [ms] + */ +void SX1276SetTxConfig( RadioModems_t modem, int8_t power, uint32_t fdev, + uint32_t bandwidth, uint32_t datarate, + uint8_t coderate, uint16_t preambleLen, + bool fixLen, bool crcOn, bool freqHopOn, + uint8_t hopPeriod, bool iqInverted, uint32_t timeout ); + +/*! + * \brief Computes the packet time on air in ms for the given payload + * + * \Remark Can only be called once SetRxConfig or SetTxConfig have been called + * + * \param [IN] modem Radio modem to be used [0: FSK, 1: LoRa] + * \param [IN] pktLen Packet payload length + * + * \retval airTime Computed airTime (ms) for the given packet payload length + */ +uint32_t SX1276GetTimeOnAir( RadioModems_t modem, uint8_t pktLen ); + +/*! + * \brief Sends the buffer of size. Prepares the packet to be sent and sets + * the radio in transmission + * + * \param [IN]: buffer Buffer pointer + * \param [IN]: size Buffer size + */ +void SX1276Send( uint8_t *buffer, uint8_t size ); + +/*! + * \brief Sets the radio in sleep mode + */ +void SX1276SetSleep( void ); + +/*! + * \brief Sets the radio in standby mode + */ +void SX1276SetStby( void ); + +/*! + * \brief Sets the radio in reception mode for the given time + * \param [IN] timeout Reception timeout [ms] [0: continuous, others timeout] + */ +void SX1276SetRx( uint32_t timeout ); + +/*! + * \brief Start a Channel Activity Detection + */ +void SX1276StartCad( void ); + +/*! + * \brief Sets the radio in continuous wave transmission mode + * + * \param [IN]: freq Channel RF frequency + * \param [IN]: power Sets the output power [dBm] + * \param [IN]: time Transmission mode timeout [s] + */ +void SX1276SetTxContinuousWave( uint32_t freq, int8_t power, uint16_t time ); + +/*! + * \brief Reads the current RSSI value + * + * \retval rssiValue Current RSSI value in [dBm] + */ +int16_t SX1276ReadRssi( RadioModems_t modem ); + +/*! + * \brief Writes the radio register at the specified address + * + * \param [IN]: addr Register address + * \param [IN]: data New register value + */ +void SX1276Write( uint8_t addr, uint8_t data ); + +/*! + * \brief Reads the radio register at the specified address + * + * \param [IN]: addr Register address + * \retval data Register value + */ +uint8_t SX1276Read( uint8_t addr ); + +/*! + * \brief Writes multiple radio registers starting at address + * + * \param [IN] addr First Radio register address + * \param [IN] buffer Buffer containing the new register's values + * \param [IN] size Number of registers to be written + */ +void SX1276WriteBuffer( uint8_t addr, uint8_t *buffer, uint8_t size ); + +/*! + * \brief Reads multiple radio registers starting at address + * + * \param [IN] addr First Radio register address + * \param [OUT] buffer Buffer where to copy the registers data + * \param [IN] size Number of registers to be read + */ +void SX1276ReadBuffer( uint8_t addr, uint8_t *buffer, uint8_t size ); + +/*! + * \brief Sets the maximum payload length. + * + * \param [IN] modem Radio modem to be used [0: FSK, 1: LoRa] + * \param [IN] max Maximum payload length in bytes + */ +void SX1276SetMaxPayloadLength( RadioModems_t modem, uint8_t max ); + +/*! + * \brief Sets the network to public or private. Updates the sync byte. + * + * \remark Applies to LoRa modem only + * + * \param [IN] enable if true, it enables a public network + */ +void SX1276SetPublicNetwork( bool enable ); + +#endif // __SX1276_H__ diff --git a/lib/radio/sx1276/sx1276Regs-Fsk.h b/lib/radio/sx1276/sx1276Regs-Fsk.h new file mode 100755 index 0000000..5bdd895 --- /dev/null +++ b/lib/radio/sx1276/sx1276Regs-Fsk.h @@ -0,0 +1,1134 @@ +/* + / _____) _ | | +( (____ _____ ____ _| |_ _____ ____| |__ + \____ \| ___ | (_ _) ___ |/ ___) _ \ + _____) ) ____| | | || |_| ____( (___| | | | +(______/|_____)_|_|_| \__)_____)\____)_| |_| + (C)2013 Semtech + +Description: SX1276 FSK modem registers and bits definitions + +License: Revised BSD License, see LICENSE.TXT file include in the project + +Maintainer: Miguel Luis and Gregory Cristian +*/ +#ifndef __SX1276_REGS_FSK_H__ +#define __SX1276_REGS_FSK_H__ + +/*! + * ============================================================================ + * SX1276 Internal registers Address + * ============================================================================ + */ +#define REG_FIFO 0x00 +// Common settings +#define REG_OPMODE 0x01 +#define REG_BITRATEMSB 0x02 +#define REG_BITRATELSB 0x03 +#define REG_FDEVMSB 0x04 +#define REG_FDEVLSB 0x05 +#define REG_FRFMSB 0x06 +#define REG_FRFMID 0x07 +#define REG_FRFLSB 0x08 +// Tx settings +#define REG_PACONFIG 0x09 +#define REG_PARAMP 0x0A +#define REG_OCP 0x0B +// Rx settings +#define REG_LNA 0x0C +#define REG_RXCONFIG 0x0D +#define REG_RSSICONFIG 0x0E +#define REG_RSSICOLLISION 0x0F +#define REG_RSSITHRESH 0x10 +#define REG_RSSIVALUE 0x11 +#define REG_RXBW 0x12 +#define REG_AFCBW 0x13 +#define REG_OOKPEAK 0x14 +#define REG_OOKFIX 0x15 +#define REG_OOKAVG 0x16 +#define REG_RES17 0x17 +#define REG_RES18 0x18 +#define REG_RES19 0x19 +#define REG_AFCFEI 0x1A +#define REG_AFCMSB 0x1B +#define REG_AFCLSB 0x1C +#define REG_FEIMSB 0x1D +#define REG_FEILSB 0x1E +#define REG_PREAMBLEDETECT 0x1F +#define REG_RXTIMEOUT1 0x20 +#define REG_RXTIMEOUT2 0x21 +#define REG_RXTIMEOUT3 0x22 +#define REG_RXDELAY 0x23 +// Oscillator settings +#define REG_OSC 0x24 +// Packet handler settings +#define REG_PREAMBLEMSB 0x25 +#define REG_PREAMBLELSB 0x26 +#define REG_SYNCCONFIG 0x27 +#define REG_SYNCVALUE1 0x28 +#define REG_SYNCVALUE2 0x29 +#define REG_SYNCVALUE3 0x2A +#define REG_SYNCVALUE4 0x2B +#define REG_SYNCVALUE5 0x2C +#define REG_SYNCVALUE6 0x2D +#define REG_SYNCVALUE7 0x2E +#define REG_SYNCVALUE8 0x2F +#define REG_PACKETCONFIG1 0x30 +#define REG_PACKETCONFIG2 0x31 +#define REG_PAYLOADLENGTH 0x32 +#define REG_NODEADRS 0x33 +#define REG_BROADCASTADRS 0x34 +#define REG_FIFOTHRESH 0x35 +// SM settings +#define REG_SEQCONFIG1 0x36 +#define REG_SEQCONFIG2 0x37 +#define REG_TIMERRESOL 0x38 +#define REG_TIMER1COEF 0x39 +#define REG_TIMER2COEF 0x3A +// Service settings +#define REG_IMAGECAL 0x3B +#define REG_TEMP 0x3C +#define REG_LOWBAT 0x3D +// Status +#define REG_IRQFLAGS1 0x3E +#define REG_IRQFLAGS2 0x3F +// I/O settings +#define REG_DIOMAPPING1 0x40 +#define REG_DIOMAPPING2 0x41 +// Version +#define REG_VERSION 0x42 +// Additional settings +#define REG_PLLHOP 0x44 +#define REG_TCXO 0x4B +#define REG_PADAC 0x4D +#define REG_FORMERTEMP 0x5B +#define REG_BITRATEFRAC 0x5D +#define REG_AGCREF 0x61 +#define REG_AGCTHRESH1 0x62 +#define REG_AGCTHRESH2 0x63 +#define REG_AGCTHRESH3 0x64 +#define REG_PLL 0x70 + +/*! + * ============================================================================ + * SX1276 FSK bits control definition + * ============================================================================ + */ + +/*! + * RegFifo + */ + +/*! + * RegOpMode + */ +#define RF_OPMODE_LONGRANGEMODE_MASK 0x7F +#define RF_OPMODE_LONGRANGEMODE_OFF 0x00 +#define RF_OPMODE_LONGRANGEMODE_ON 0x80 + +#define RF_OPMODE_MODULATIONTYPE_MASK 0x9F +#define RF_OPMODE_MODULATIONTYPE_FSK 0x00 // Default +#define RF_OPMODE_MODULATIONTYPE_OOK 0x20 + +#define RF_OPMODE_MODULATIONSHAPING_MASK 0xE7 +#define RF_OPMODE_MODULATIONSHAPING_00 0x00 // Default +#define RF_OPMODE_MODULATIONSHAPING_01 0x08 +#define RF_OPMODE_MODULATIONSHAPING_10 0x10 +#define RF_OPMODE_MODULATIONSHAPING_11 0x18 + +#define RF_OPMODE_MASK 0xF8 +#define RF_OPMODE_SLEEP 0x00 +#define RF_OPMODE_STANDBY 0x01 // Default +#define RF_OPMODE_SYNTHESIZER_TX 0x02 +#define RF_OPMODE_TRANSMITTER 0x03 +#define RF_OPMODE_SYNTHESIZER_RX 0x04 +#define RF_OPMODE_RECEIVER 0x05 + +/*! + * RegBitRate (bits/sec) + */ +#define RF_BITRATEMSB_1200_BPS 0x68 +#define RF_BITRATELSB_1200_BPS 0x2B +#define RF_BITRATEMSB_2400_BPS 0x34 +#define RF_BITRATELSB_2400_BPS 0x15 +#define RF_BITRATEMSB_4800_BPS 0x1A // Default +#define RF_BITRATELSB_4800_BPS 0x0B // Default +#define RF_BITRATEMSB_9600_BPS 0x0D +#define RF_BITRATELSB_9600_BPS 0x05 +#define RF_BITRATEMSB_15000_BPS 0x08 +#define RF_BITRATELSB_15000_BPS 0x55 +#define RF_BITRATEMSB_19200_BPS 0x06 +#define RF_BITRATELSB_19200_BPS 0x83 +#define RF_BITRATEMSB_38400_BPS 0x03 +#define RF_BITRATELSB_38400_BPS 0x41 +#define RF_BITRATEMSB_76800_BPS 0x01 +#define RF_BITRATELSB_76800_BPS 0xA1 +#define RF_BITRATEMSB_153600_BPS 0x00 +#define RF_BITRATELSB_153600_BPS 0xD0 +#define RF_BITRATEMSB_57600_BPS 0x02 +#define RF_BITRATELSB_57600_BPS 0x2C +#define RF_BITRATEMSB_115200_BPS 0x01 +#define RF_BITRATELSB_115200_BPS 0x16 +#define RF_BITRATEMSB_12500_BPS 0x0A +#define RF_BITRATELSB_12500_BPS 0x00 +#define RF_BITRATEMSB_25000_BPS 0x05 +#define RF_BITRATELSB_25000_BPS 0x00 +#define RF_BITRATEMSB_50000_BPS 0x02 +#define RF_BITRATELSB_50000_BPS 0x80 +#define RF_BITRATEMSB_100000_BPS 0x01 +#define RF_BITRATELSB_100000_BPS 0x40 +#define RF_BITRATEMSB_150000_BPS 0x00 +#define RF_BITRATELSB_150000_BPS 0xD5 +#define RF_BITRATEMSB_200000_BPS 0x00 +#define RF_BITRATELSB_200000_BPS 0xA0 +#define RF_BITRATEMSB_250000_BPS 0x00 +#define RF_BITRATELSB_250000_BPS 0x80 +#define RF_BITRATEMSB_32768_BPS 0x03 +#define RF_BITRATELSB_32768_BPS 0xD1 + +/*! + * RegFdev (Hz) + */ +#define RF_FDEVMSB_2000_HZ 0x00 +#define RF_FDEVLSB_2000_HZ 0x21 +#define RF_FDEVMSB_5000_HZ 0x00 // Default +#define RF_FDEVLSB_5000_HZ 0x52 // Default +#define RF_FDEVMSB_10000_HZ 0x00 +#define RF_FDEVLSB_10000_HZ 0xA4 +#define RF_FDEVMSB_15000_HZ 0x00 +#define RF_FDEVLSB_15000_HZ 0xF6 +#define RF_FDEVMSB_20000_HZ 0x01 +#define RF_FDEVLSB_20000_HZ 0x48 +#define RF_FDEVMSB_25000_HZ 0x01 +#define RF_FDEVLSB_25000_HZ 0x9A +#define RF_FDEVMSB_30000_HZ 0x01 +#define RF_FDEVLSB_30000_HZ 0xEC +#define RF_FDEVMSB_35000_HZ 0x02 +#define RF_FDEVLSB_35000_HZ 0x3D +#define RF_FDEVMSB_40000_HZ 0x02 +#define RF_FDEVLSB_40000_HZ 0x8F +#define RF_FDEVMSB_45000_HZ 0x02 +#define RF_FDEVLSB_45000_HZ 0xE1 +#define RF_FDEVMSB_50000_HZ 0x03 +#define RF_FDEVLSB_50000_HZ 0x33 +#define RF_FDEVMSB_55000_HZ 0x03 +#define RF_FDEVLSB_55000_HZ 0x85 +#define RF_FDEVMSB_60000_HZ 0x03 +#define RF_FDEVLSB_60000_HZ 0xD7 +#define RF_FDEVMSB_65000_HZ 0x04 +#define RF_FDEVLSB_65000_HZ 0x29 +#define RF_FDEVMSB_70000_HZ 0x04 +#define RF_FDEVLSB_70000_HZ 0x7B +#define RF_FDEVMSB_75000_HZ 0x04 +#define RF_FDEVLSB_75000_HZ 0xCD +#define RF_FDEVMSB_80000_HZ 0x05 +#define RF_FDEVLSB_80000_HZ 0x1F +#define RF_FDEVMSB_85000_HZ 0x05 +#define RF_FDEVLSB_85000_HZ 0x71 +#define RF_FDEVMSB_90000_HZ 0x05 +#define RF_FDEVLSB_90000_HZ 0xC3 +#define RF_FDEVMSB_95000_HZ 0x06 +#define RF_FDEVLSB_95000_HZ 0x14 +#define RF_FDEVMSB_100000_HZ 0x06 +#define RF_FDEVLSB_100000_HZ 0x66 +#define RF_FDEVMSB_110000_HZ 0x07 +#define RF_FDEVLSB_110000_HZ 0x0A +#define RF_FDEVMSB_120000_HZ 0x07 +#define RF_FDEVLSB_120000_HZ 0xAE +#define RF_FDEVMSB_130000_HZ 0x08 +#define RF_FDEVLSB_130000_HZ 0x52 +#define RF_FDEVMSB_140000_HZ 0x08 +#define RF_FDEVLSB_140000_HZ 0xF6 +#define RF_FDEVMSB_150000_HZ 0x09 +#define RF_FDEVLSB_150000_HZ 0x9A +#define RF_FDEVMSB_160000_HZ 0x0A +#define RF_FDEVLSB_160000_HZ 0x3D +#define RF_FDEVMSB_170000_HZ 0x0A +#define RF_FDEVLSB_170000_HZ 0xE1 +#define RF_FDEVMSB_180000_HZ 0x0B +#define RF_FDEVLSB_180000_HZ 0x85 +#define RF_FDEVMSB_190000_HZ 0x0C +#define RF_FDEVLSB_190000_HZ 0x29 +#define RF_FDEVMSB_200000_HZ 0x0C +#define RF_FDEVLSB_200000_HZ 0xCD + +/*! + * RegFrf (MHz) + */ +#define RF_FRFMSB_863_MHZ 0xD7 +#define RF_FRFMID_863_MHZ 0xC0 +#define RF_FRFLSB_863_MHZ 0x00 +#define RF_FRFMSB_864_MHZ 0xD8 +#define RF_FRFMID_864_MHZ 0x00 +#define RF_FRFLSB_864_MHZ 0x00 +#define RF_FRFMSB_865_MHZ 0xD8 +#define RF_FRFMID_865_MHZ 0x40 +#define RF_FRFLSB_865_MHZ 0x00 +#define RF_FRFMSB_866_MHZ 0xD8 +#define RF_FRFMID_866_MHZ 0x80 +#define RF_FRFLSB_866_MHZ 0x00 +#define RF_FRFMSB_867_MHZ 0xD8 +#define RF_FRFMID_867_MHZ 0xC0 +#define RF_FRFLSB_867_MHZ 0x00 +#define RF_FRFMSB_868_MHZ 0xD9 +#define RF_FRFMID_868_MHZ 0x00 +#define RF_FRFLSB_868_MHZ 0x00 +#define RF_FRFMSB_869_MHZ 0xD9 +#define RF_FRFMID_869_MHZ 0x40 +#define RF_FRFLSB_869_MHZ 0x00 +#define RF_FRFMSB_870_MHZ 0xD9 +#define RF_FRFMID_870_MHZ 0x80 +#define RF_FRFLSB_870_MHZ 0x00 + +#define RF_FRFMSB_902_MHZ 0xE1 +#define RF_FRFMID_902_MHZ 0x80 +#define RF_FRFLSB_902_MHZ 0x00 +#define RF_FRFMSB_903_MHZ 0xE1 +#define RF_FRFMID_903_MHZ 0xC0 +#define RF_FRFLSB_903_MHZ 0x00 +#define RF_FRFMSB_904_MHZ 0xE2 +#define RF_FRFMID_904_MHZ 0x00 +#define RF_FRFLSB_904_MHZ 0x00 +#define RF_FRFMSB_905_MHZ 0xE2 +#define RF_FRFMID_905_MHZ 0x40 +#define RF_FRFLSB_905_MHZ 0x00 +#define RF_FRFMSB_906_MHZ 0xE2 +#define RF_FRFMID_906_MHZ 0x80 +#define RF_FRFLSB_906_MHZ 0x00 +#define RF_FRFMSB_907_MHZ 0xE2 +#define RF_FRFMID_907_MHZ 0xC0 +#define RF_FRFLSB_907_MHZ 0x00 +#define RF_FRFMSB_908_MHZ 0xE3 +#define RF_FRFMID_908_MHZ 0x00 +#define RF_FRFLSB_908_MHZ 0x00 +#define RF_FRFMSB_909_MHZ 0xE3 +#define RF_FRFMID_909_MHZ 0x40 +#define RF_FRFLSB_909_MHZ 0x00 +#define RF_FRFMSB_910_MHZ 0xE3 +#define RF_FRFMID_910_MHZ 0x80 +#define RF_FRFLSB_910_MHZ 0x00 +#define RF_FRFMSB_911_MHZ 0xE3 +#define RF_FRFMID_911_MHZ 0xC0 +#define RF_FRFLSB_911_MHZ 0x00 +#define RF_FRFMSB_912_MHZ 0xE4 +#define RF_FRFMID_912_MHZ 0x00 +#define RF_FRFLSB_912_MHZ 0x00 +#define RF_FRFMSB_913_MHZ 0xE4 +#define RF_FRFMID_913_MHZ 0x40 +#define RF_FRFLSB_913_MHZ 0x00 +#define RF_FRFMSB_914_MHZ 0xE4 +#define RF_FRFMID_914_MHZ 0x80 +#define RF_FRFLSB_914_MHZ 0x00 +#define RF_FRFMSB_915_MHZ 0xE4 // Default +#define RF_FRFMID_915_MHZ 0xC0 // Default +#define RF_FRFLSB_915_MHZ 0x00 // Default +#define RF_FRFMSB_916_MHZ 0xE5 +#define RF_FRFMID_916_MHZ 0x00 +#define RF_FRFLSB_916_MHZ 0x00 +#define RF_FRFMSB_917_MHZ 0xE5 +#define RF_FRFMID_917_MHZ 0x40 +#define RF_FRFLSB_917_MHZ 0x00 +#define RF_FRFMSB_918_MHZ 0xE5 +#define RF_FRFMID_918_MHZ 0x80 +#define RF_FRFLSB_918_MHZ 0x00 +#define RF_FRFMSB_919_MHZ 0xE5 +#define RF_FRFMID_919_MHZ 0xC0 +#define RF_FRFLSB_919_MHZ 0x00 +#define RF_FRFMSB_920_MHZ 0xE6 +#define RF_FRFMID_920_MHZ 0x00 +#define RF_FRFLSB_920_MHZ 0x00 +#define RF_FRFMSB_921_MHZ 0xE6 +#define RF_FRFMID_921_MHZ 0x40 +#define RF_FRFLSB_921_MHZ 0x00 +#define RF_FRFMSB_922_MHZ 0xE6 +#define RF_FRFMID_922_MHZ 0x80 +#define RF_FRFLSB_922_MHZ 0x00 +#define RF_FRFMSB_923_MHZ 0xE6 +#define RF_FRFMID_923_MHZ 0xC0 +#define RF_FRFLSB_923_MHZ 0x00 +#define RF_FRFMSB_924_MHZ 0xE7 +#define RF_FRFMID_924_MHZ 0x00 +#define RF_FRFLSB_924_MHZ 0x00 +#define RF_FRFMSB_925_MHZ 0xE7 +#define RF_FRFMID_925_MHZ 0x40 +#define RF_FRFLSB_925_MHZ 0x00 +#define RF_FRFMSB_926_MHZ 0xE7 +#define RF_FRFMID_926_MHZ 0x80 +#define RF_FRFLSB_926_MHZ 0x00 +#define RF_FRFMSB_927_MHZ 0xE7 +#define RF_FRFMID_927_MHZ 0xC0 +#define RF_FRFLSB_927_MHZ 0x00 +#define RF_FRFMSB_928_MHZ 0xE8 +#define RF_FRFMID_928_MHZ 0x00 +#define RF_FRFLSB_928_MHZ 0x00 + +/*! + * RegPaConfig + */ +#define RF_PACONFIG_PASELECT_MASK 0x7F +#define RF_PACONFIG_PASELECT_PABOOST 0x80 +#define RF_PACONFIG_PASELECT_RFO 0x00 // Default + +#define RF_PACONFIG_MAX_POWER_MASK 0x8F + +#define RF_PACONFIG_OUTPUTPOWER_MASK 0xF0 + +/*! + * RegPaRamp + */ +#define RF_PARAMP_MODULATIONSHAPING_MASK 0x9F +#define RF_PARAMP_MODULATIONSHAPING_00 0x00 // Default +#define RF_PARAMP_MODULATIONSHAPING_01 0x20 +#define RF_PARAMP_MODULATIONSHAPING_10 0x40 +#define RF_PARAMP_MODULATIONSHAPING_11 0x60 + +#define RF_PARAMP_LOWPNTXPLL_MASK 0xEF +#define RF_PARAMP_LOWPNTXPLL_OFF 0x10 +#define RF_PARAMP_LOWPNTXPLL_ON 0x00 // Default + +#define RF_PARAMP_MASK 0xF0 +#define RF_PARAMP_3400_US 0x00 +#define RF_PARAMP_2000_US 0x01 +#define RF_PARAMP_1000_US 0x02 +#define RF_PARAMP_0500_US 0x03 +#define RF_PARAMP_0250_US 0x04 +#define RF_PARAMP_0125_US 0x05 +#define RF_PARAMP_0100_US 0x06 +#define RF_PARAMP_0062_US 0x07 +#define RF_PARAMP_0050_US 0x08 +#define RF_PARAMP_0040_US 0x09 // Default +#define RF_PARAMP_0031_US 0x0A +#define RF_PARAMP_0025_US 0x0B +#define RF_PARAMP_0020_US 0x0C +#define RF_PARAMP_0015_US 0x0D +#define RF_PARAMP_0012_US 0x0E +#define RF_PARAMP_0010_US 0x0F + +/*! + * RegOcp + */ +#define RF_OCP_MASK 0xDF +#define RF_OCP_ON 0x20 // Default +#define RF_OCP_OFF 0x00 + +#define RF_OCP_TRIM_MASK 0xE0 +#define RF_OCP_TRIM_045_MA 0x00 +#define RF_OCP_TRIM_050_MA 0x01 +#define RF_OCP_TRIM_055_MA 0x02 +#define RF_OCP_TRIM_060_MA 0x03 +#define RF_OCP_TRIM_065_MA 0x04 +#define RF_OCP_TRIM_070_MA 0x05 +#define RF_OCP_TRIM_075_MA 0x06 +#define RF_OCP_TRIM_080_MA 0x07 +#define RF_OCP_TRIM_085_MA 0x08 +#define RF_OCP_TRIM_090_MA 0x09 +#define RF_OCP_TRIM_095_MA 0x0A +#define RF_OCP_TRIM_100_MA 0x0B // Default +#define RF_OCP_TRIM_105_MA 0x0C +#define RF_OCP_TRIM_110_MA 0x0D +#define RF_OCP_TRIM_115_MA 0x0E +#define RF_OCP_TRIM_120_MA 0x0F +#define RF_OCP_TRIM_130_MA 0x10 +#define RF_OCP_TRIM_140_MA 0x11 +#define RF_OCP_TRIM_150_MA 0x12 +#define RF_OCP_TRIM_160_MA 0x13 +#define RF_OCP_TRIM_170_MA 0x14 +#define RF_OCP_TRIM_180_MA 0x15 +#define RF_OCP_TRIM_190_MA 0x16 +#define RF_OCP_TRIM_200_MA 0x17 +#define RF_OCP_TRIM_210_MA 0x18 +#define RF_OCP_TRIM_220_MA 0x19 +#define RF_OCP_TRIM_230_MA 0x1A +#define RF_OCP_TRIM_240_MA 0x1B + +/*! + * RegLna + */ +#define RF_LNA_GAIN_MASK 0x1F +#define RF_LNA_GAIN_G1 0x20 // Default +#define RF_LNA_GAIN_G2 0x40 +#define RF_LNA_GAIN_G3 0x60 +#define RF_LNA_GAIN_G4 0x80 +#define RF_LNA_GAIN_G5 0xA0 +#define RF_LNA_GAIN_G6 0xC0 + +#define RF_LNA_BOOST_MASK 0xFC +#define RF_LNA_BOOST_OFF 0x00 // Default +#define RF_LNA_BOOST_ON 0x03 + +/*! + * RegRxConfig + */ +#define RF_RXCONFIG_RESTARTRXONCOLLISION_MASK 0x7F +#define RF_RXCONFIG_RESTARTRXONCOLLISION_ON 0x80 +#define RF_RXCONFIG_RESTARTRXONCOLLISION_OFF 0x00 // Default + +#define RF_RXCONFIG_RESTARTRXWITHOUTPLLLOCK 0x40 // Write only + +#define RF_RXCONFIG_RESTARTRXWITHPLLLOCK 0x20 // Write only + +#define RF_RXCONFIG_AFCAUTO_MASK 0xEF +#define RF_RXCONFIG_AFCAUTO_ON 0x10 +#define RF_RXCONFIG_AFCAUTO_OFF 0x00 // Default + +#define RF_RXCONFIG_AGCAUTO_MASK 0xF7 +#define RF_RXCONFIG_AGCAUTO_ON 0x08 // Default +#define RF_RXCONFIG_AGCAUTO_OFF 0x00 + +#define RF_RXCONFIG_RXTRIGER_MASK 0xF8 +#define RF_RXCONFIG_RXTRIGER_OFF 0x00 +#define RF_RXCONFIG_RXTRIGER_RSSI 0x01 +#define RF_RXCONFIG_RXTRIGER_PREAMBLEDETECT 0x06 // Default +#define RF_RXCONFIG_RXTRIGER_RSSI_PREAMBLEDETECT 0x07 + +/*! + * RegRssiConfig + */ +#define RF_RSSICONFIG_OFFSET_MASK 0x07 +#define RF_RSSICONFIG_OFFSET_P_00_DB 0x00 // Default +#define RF_RSSICONFIG_OFFSET_P_01_DB 0x08 +#define RF_RSSICONFIG_OFFSET_P_02_DB 0x10 +#define RF_RSSICONFIG_OFFSET_P_03_DB 0x18 +#define RF_RSSICONFIG_OFFSET_P_04_DB 0x20 +#define RF_RSSICONFIG_OFFSET_P_05_DB 0x28 +#define RF_RSSICONFIG_OFFSET_P_06_DB 0x30 +#define RF_RSSICONFIG_OFFSET_P_07_DB 0x38 +#define RF_RSSICONFIG_OFFSET_P_08_DB 0x40 +#define RF_RSSICONFIG_OFFSET_P_09_DB 0x48 +#define RF_RSSICONFIG_OFFSET_P_10_DB 0x50 +#define RF_RSSICONFIG_OFFSET_P_11_DB 0x58 +#define RF_RSSICONFIG_OFFSET_P_12_DB 0x60 +#define RF_RSSICONFIG_OFFSET_P_13_DB 0x68 +#define RF_RSSICONFIG_OFFSET_P_14_DB 0x70 +#define RF_RSSICONFIG_OFFSET_P_15_DB 0x78 +#define RF_RSSICONFIG_OFFSET_M_16_DB 0x80 +#define RF_RSSICONFIG_OFFSET_M_15_DB 0x88 +#define RF_RSSICONFIG_OFFSET_M_14_DB 0x90 +#define RF_RSSICONFIG_OFFSET_M_13_DB 0x98 +#define RF_RSSICONFIG_OFFSET_M_12_DB 0xA0 +#define RF_RSSICONFIG_OFFSET_M_11_DB 0xA8 +#define RF_RSSICONFIG_OFFSET_M_10_DB 0xB0 +#define RF_RSSICONFIG_OFFSET_M_09_DB 0xB8 +#define RF_RSSICONFIG_OFFSET_M_08_DB 0xC0 +#define RF_RSSICONFIG_OFFSET_M_07_DB 0xC8 +#define RF_RSSICONFIG_OFFSET_M_06_DB 0xD0 +#define RF_RSSICONFIG_OFFSET_M_05_DB 0xD8 +#define RF_RSSICONFIG_OFFSET_M_04_DB 0xE0 +#define RF_RSSICONFIG_OFFSET_M_03_DB 0xE8 +#define RF_RSSICONFIG_OFFSET_M_02_DB 0xF0 +#define RF_RSSICONFIG_OFFSET_M_01_DB 0xF8 + +#define RF_RSSICONFIG_SMOOTHING_MASK 0xF8 +#define RF_RSSICONFIG_SMOOTHING_2 0x00 +#define RF_RSSICONFIG_SMOOTHING_4 0x01 +#define RF_RSSICONFIG_SMOOTHING_8 0x02 // Default +#define RF_RSSICONFIG_SMOOTHING_16 0x03 +#define RF_RSSICONFIG_SMOOTHING_32 0x04 +#define RF_RSSICONFIG_SMOOTHING_64 0x05 +#define RF_RSSICONFIG_SMOOTHING_128 0x06 +#define RF_RSSICONFIG_SMOOTHING_256 0x07 + +/*! + * RegRssiCollision + */ +#define RF_RSSICOLISION_THRESHOLD 0x0A // Default + +/*! + * RegRssiThresh + */ +#define RF_RSSITHRESH_THRESHOLD 0xFF // Default + +/*! + * RegRssiValue (Read Only) + */ + +/*! + * RegRxBw + */ +#define RF_RXBW_MANT_MASK 0xE7 +#define RF_RXBW_MANT_16 0x00 +#define RF_RXBW_MANT_20 0x08 +#define RF_RXBW_MANT_24 0x10 // Default + +#define RF_RXBW_EXP_MASK 0xF8 +#define RF_RXBW_EXP_0 0x00 +#define RF_RXBW_EXP_1 0x01 +#define RF_RXBW_EXP_2 0x02 +#define RF_RXBW_EXP_3 0x03 +#define RF_RXBW_EXP_4 0x04 +#define RF_RXBW_EXP_5 0x05 // Default +#define RF_RXBW_EXP_6 0x06 +#define RF_RXBW_EXP_7 0x07 + +/*! + * RegAfcBw + */ +#define RF_AFCBW_MANTAFC_MASK 0xE7 +#define RF_AFCBW_MANTAFC_16 0x00 +#define RF_AFCBW_MANTAFC_20 0x08 // Default +#define RF_AFCBW_MANTAFC_24 0x10 + +#define RF_AFCBW_EXPAFC_MASK 0xF8 +#define RF_AFCBW_EXPAFC_0 0x00 +#define RF_AFCBW_EXPAFC_1 0x01 +#define RF_AFCBW_EXPAFC_2 0x02 +#define RF_AFCBW_EXPAFC_3 0x03 // Default +#define RF_AFCBW_EXPAFC_4 0x04 +#define RF_AFCBW_EXPAFC_5 0x05 +#define RF_AFCBW_EXPAFC_6 0x06 +#define RF_AFCBW_EXPAFC_7 0x07 + +/*! + * RegOokPeak + */ +#define RF_OOKPEAK_BITSYNC_MASK 0xDF // Default +#define RF_OOKPEAK_BITSYNC_ON 0x20 // Default +#define RF_OOKPEAK_BITSYNC_OFF 0x00 + +#define RF_OOKPEAK_OOKTHRESHTYPE_MASK 0xE7 +#define RF_OOKPEAK_OOKTHRESHTYPE_FIXED 0x00 +#define RF_OOKPEAK_OOKTHRESHTYPE_PEAK 0x08 // Default +#define RF_OOKPEAK_OOKTHRESHTYPE_AVERAGE 0x10 + +#define RF_OOKPEAK_OOKPEAKTHRESHSTEP_MASK 0xF8 +#define RF_OOKPEAK_OOKPEAKTHRESHSTEP_0_5_DB 0x00 // Default +#define RF_OOKPEAK_OOKPEAKTHRESHSTEP_1_0_DB 0x01 +#define RF_OOKPEAK_OOKPEAKTHRESHSTEP_1_5_DB 0x02 +#define RF_OOKPEAK_OOKPEAKTHRESHSTEP_2_0_DB 0x03 +#define RF_OOKPEAK_OOKPEAKTHRESHSTEP_3_0_DB 0x04 +#define RF_OOKPEAK_OOKPEAKTHRESHSTEP_4_0_DB 0x05 +#define RF_OOKPEAK_OOKPEAKTHRESHSTEP_5_0_DB 0x06 +#define RF_OOKPEAK_OOKPEAKTHRESHSTEP_6_0_DB 0x07 + +/*! + * RegOokFix + */ +#define RF_OOKFIX_OOKFIXEDTHRESHOLD 0x0C // Default + +/*! + * RegOokAvg + */ +#define RF_OOKAVG_OOKPEAKTHRESHDEC_MASK 0x1F +#define RF_OOKAVG_OOKPEAKTHRESHDEC_000 0x00 // Default +#define RF_OOKAVG_OOKPEAKTHRESHDEC_001 0x20 +#define RF_OOKAVG_OOKPEAKTHRESHDEC_010 0x40 +#define RF_OOKAVG_OOKPEAKTHRESHDEC_011 0x60 +#define RF_OOKAVG_OOKPEAKTHRESHDEC_100 0x80 +#define RF_OOKAVG_OOKPEAKTHRESHDEC_101 0xA0 +#define RF_OOKAVG_OOKPEAKTHRESHDEC_110 0xC0 +#define RF_OOKAVG_OOKPEAKTHRESHDEC_111 0xE0 + +#define RF_OOKAVG_AVERAGEOFFSET_MASK 0xF3 +#define RF_OOKAVG_AVERAGEOFFSET_0_DB 0x00 // Default +#define RF_OOKAVG_AVERAGEOFFSET_2_DB 0x04 +#define RF_OOKAVG_AVERAGEOFFSET_4_DB 0x08 +#define RF_OOKAVG_AVERAGEOFFSET_6_DB 0x0C + +#define RF_OOKAVG_OOKAVERAGETHRESHFILT_MASK 0xFC +#define RF_OOKAVG_OOKAVERAGETHRESHFILT_00 0x00 +#define RF_OOKAVG_OOKAVERAGETHRESHFILT_01 0x01 +#define RF_OOKAVG_OOKAVERAGETHRESHFILT_10 0x02 // Default +#define RF_OOKAVG_OOKAVERAGETHRESHFILT_11 0x03 + +/*! + * RegAfcFei + */ +#define RF_AFCFEI_AGCSTART 0x10 + +#define RF_AFCFEI_AFCCLEAR 0x02 + +#define RF_AFCFEI_AFCAUTOCLEAR_MASK 0xFE +#define RF_AFCFEI_AFCAUTOCLEAR_ON 0x01 +#define RF_AFCFEI_AFCAUTOCLEAR_OFF 0x00 // Default + +/*! + * RegAfcMsb (Read Only) + */ + +/*! + * RegAfcLsb (Read Only) + */ + +/*! + * RegFeiMsb (Read Only) + */ + +/*! + * RegFeiLsb (Read Only) + */ + +/*! + * RegPreambleDetect + */ +#define RF_PREAMBLEDETECT_DETECTOR_MASK 0x7F +#define RF_PREAMBLEDETECT_DETECTOR_ON 0x80 // Default +#define RF_PREAMBLEDETECT_DETECTOR_OFF 0x00 + +#define RF_PREAMBLEDETECT_DETECTORSIZE_MASK 0x9F +#define RF_PREAMBLEDETECT_DETECTORSIZE_1 0x00 +#define RF_PREAMBLEDETECT_DETECTORSIZE_2 0x20 // Default +#define RF_PREAMBLEDETECT_DETECTORSIZE_3 0x40 +#define RF_PREAMBLEDETECT_DETECTORSIZE_4 0x60 + +#define RF_PREAMBLEDETECT_DETECTORTOL_MASK 0xE0 +#define RF_PREAMBLEDETECT_DETECTORTOL_0 0x00 +#define RF_PREAMBLEDETECT_DETECTORTOL_1 0x01 +#define RF_PREAMBLEDETECT_DETECTORTOL_2 0x02 +#define RF_PREAMBLEDETECT_DETECTORTOL_3 0x03 +#define RF_PREAMBLEDETECT_DETECTORTOL_4 0x04 +#define RF_PREAMBLEDETECT_DETECTORTOL_5 0x05 +#define RF_PREAMBLEDETECT_DETECTORTOL_6 0x06 +#define RF_PREAMBLEDETECT_DETECTORTOL_7 0x07 +#define RF_PREAMBLEDETECT_DETECTORTOL_8 0x08 +#define RF_PREAMBLEDETECT_DETECTORTOL_9 0x09 +#define RF_PREAMBLEDETECT_DETECTORTOL_10 0x0A // Default +#define RF_PREAMBLEDETECT_DETECTORTOL_11 0x0B +#define RF_PREAMBLEDETECT_DETECTORTOL_12 0x0C +#define RF_PREAMBLEDETECT_DETECTORTOL_13 0x0D +#define RF_PREAMBLEDETECT_DETECTORTOL_14 0x0E +#define RF_PREAMBLEDETECT_DETECTORTOL_15 0x0F +#define RF_PREAMBLEDETECT_DETECTORTOL_16 0x10 +#define RF_PREAMBLEDETECT_DETECTORTOL_17 0x11 +#define RF_PREAMBLEDETECT_DETECTORTOL_18 0x12 +#define RF_PREAMBLEDETECT_DETECTORTOL_19 0x13 +#define RF_PREAMBLEDETECT_DETECTORTOL_20 0x14 +#define RF_PREAMBLEDETECT_DETECTORTOL_21 0x15 +#define RF_PREAMBLEDETECT_DETECTORTOL_22 0x16 +#define RF_PREAMBLEDETECT_DETECTORTOL_23 0x17 +#define RF_PREAMBLEDETECT_DETECTORTOL_24 0x18 +#define RF_PREAMBLEDETECT_DETECTORTOL_25 0x19 +#define RF_PREAMBLEDETECT_DETECTORTOL_26 0x1A +#define RF_PREAMBLEDETECT_DETECTORTOL_27 0x1B +#define RF_PREAMBLEDETECT_DETECTORTOL_28 0x1C +#define RF_PREAMBLEDETECT_DETECTORTOL_29 0x1D +#define RF_PREAMBLEDETECT_DETECTORTOL_30 0x1E +#define RF_PREAMBLEDETECT_DETECTORTOL_31 0x1F + +/*! + * RegRxTimeout1 + */ +#define RF_RXTIMEOUT1_TIMEOUTRXRSSI 0x00 // Default + +/*! + * RegRxTimeout2 + */ +#define RF_RXTIMEOUT2_TIMEOUTRXPREAMBLE 0x00 // Default + +/*! + * RegRxTimeout3 + */ +#define RF_RXTIMEOUT3_TIMEOUTSIGNALSYNC 0x00 // Default + +/*! + * RegRxDelay + */ +#define RF_RXDELAY_INTERPACKETRXDELAY 0x00 // Default + +/*! + * RegOsc + */ +#define RF_OSC_RCCALSTART 0x08 + +#define RF_OSC_CLKOUT_MASK 0xF8 +#define RF_OSC_CLKOUT_32_MHZ 0x00 +#define RF_OSC_CLKOUT_16_MHZ 0x01 +#define RF_OSC_CLKOUT_8_MHZ 0x02 +#define RF_OSC_CLKOUT_4_MHZ 0x03 +#define RF_OSC_CLKOUT_2_MHZ 0x04 +#define RF_OSC_CLKOUT_1_MHZ 0x05 // Default +#define RF_OSC_CLKOUT_RC 0x06 +#define RF_OSC_CLKOUT_OFF 0x07 + +/*! + * RegPreambleMsb/RegPreambleLsb + */ +#define RF_PREAMBLEMSB_SIZE 0x00 // Default +#define RF_PREAMBLELSB_SIZE 0x03 // Default + +/*! + * RegSyncConfig + */ +#define RF_SYNCCONFIG_AUTORESTARTRXMODE_MASK 0x3F +#define RF_SYNCCONFIG_AUTORESTARTRXMODE_WAITPLL_ON 0x80 // Default +#define RF_SYNCCONFIG_AUTORESTARTRXMODE_WAITPLL_OFF 0x40 +#define RF_SYNCCONFIG_AUTORESTARTRXMODE_OFF 0x00 + + +#define RF_SYNCCONFIG_PREAMBLEPOLARITY_MASK 0xDF +#define RF_SYNCCONFIG_PREAMBLEPOLARITY_55 0x20 +#define RF_SYNCCONFIG_PREAMBLEPOLARITY_AA 0x00 // Default + +#define RF_SYNCCONFIG_SYNC_MASK 0xEF +#define RF_SYNCCONFIG_SYNC_ON 0x10 // Default +#define RF_SYNCCONFIG_SYNC_OFF 0x00 + + +#define RF_SYNCCONFIG_SYNCSIZE_MASK 0xF8 +#define RF_SYNCCONFIG_SYNCSIZE_1 0x00 +#define RF_SYNCCONFIG_SYNCSIZE_2 0x01 +#define RF_SYNCCONFIG_SYNCSIZE_3 0x02 +#define RF_SYNCCONFIG_SYNCSIZE_4 0x03 // Default +#define RF_SYNCCONFIG_SYNCSIZE_5 0x04 +#define RF_SYNCCONFIG_SYNCSIZE_6 0x05 +#define RF_SYNCCONFIG_SYNCSIZE_7 0x06 +#define RF_SYNCCONFIG_SYNCSIZE_8 0x07 + +/*! + * RegSyncValue1-8 + */ +#define RF_SYNCVALUE1_SYNCVALUE 0x01 // Default +#define RF_SYNCVALUE2_SYNCVALUE 0x01 // Default +#define RF_SYNCVALUE3_SYNCVALUE 0x01 // Default +#define RF_SYNCVALUE4_SYNCVALUE 0x01 // Default +#define RF_SYNCVALUE5_SYNCVALUE 0x01 // Default +#define RF_SYNCVALUE6_SYNCVALUE 0x01 // Default +#define RF_SYNCVALUE7_SYNCVALUE 0x01 // Default +#define RF_SYNCVALUE8_SYNCVALUE 0x01 // Default + +/*! + * RegPacketConfig1 + */ +#define RF_PACKETCONFIG1_PACKETFORMAT_MASK 0x7F +#define RF_PACKETCONFIG1_PACKETFORMAT_FIXED 0x00 +#define RF_PACKETCONFIG1_PACKETFORMAT_VARIABLE 0x80 // Default + +#define RF_PACKETCONFIG1_DCFREE_MASK 0x9F +#define RF_PACKETCONFIG1_DCFREE_OFF 0x00 // Default +#define RF_PACKETCONFIG1_DCFREE_MANCHESTER 0x20 +#define RF_PACKETCONFIG1_DCFREE_WHITENING 0x40 + +#define RF_PACKETCONFIG1_CRC_MASK 0xEF +#define RF_PACKETCONFIG1_CRC_ON 0x10 // Default +#define RF_PACKETCONFIG1_CRC_OFF 0x00 + +#define RF_PACKETCONFIG1_CRCAUTOCLEAR_MASK 0xF7 +#define RF_PACKETCONFIG1_CRCAUTOCLEAR_ON 0x00 // Default +#define RF_PACKETCONFIG1_CRCAUTOCLEAR_OFF 0x08 + +#define RF_PACKETCONFIG1_ADDRSFILTERING_MASK 0xF9 +#define RF_PACKETCONFIG1_ADDRSFILTERING_OFF 0x00 // Default +#define RF_PACKETCONFIG1_ADDRSFILTERING_NODE 0x02 +#define RF_PACKETCONFIG1_ADDRSFILTERING_NODEBROADCAST 0x04 + +#define RF_PACKETCONFIG1_CRCWHITENINGTYPE_MASK 0xFE +#define RF_PACKETCONFIG1_CRCWHITENINGTYPE_CCITT 0x00 // Default +#define RF_PACKETCONFIG1_CRCWHITENINGTYPE_IBM 0x01 + +/*! + * RegPacketConfig2 + */ + +#define RF_PACKETCONFIG2_WMBUS_CRC_ENABLE_MASK 0x7F +#define RF_PACKETCONFIG2_WMBUS_CRC_ENABLE 0x80 +#define RF_PACKETCONFIG2_WMBUS_CRC_DISABLE 0x00 // Default + +#define RF_PACKETCONFIG2_DATAMODE_MASK 0xBF +#define RF_PACKETCONFIG2_DATAMODE_CONTINUOUS 0x00 +#define RF_PACKETCONFIG2_DATAMODE_PACKET 0x40 // Default + +#define RF_PACKETCONFIG2_IOHOME_MASK 0xDF +#define RF_PACKETCONFIG2_IOHOME_ON 0x20 +#define RF_PACKETCONFIG2_IOHOME_OFF 0x00 // Default + +#define RF_PACKETCONFIG2_BEACON_MASK 0xF7 +#define RF_PACKETCONFIG2_BEACON_ON 0x08 +#define RF_PACKETCONFIG2_BEACON_OFF 0x00 // Default + +#define RF_PACKETCONFIG2_PAYLOADLENGTH_MSB_MASK 0xF8 + +/*! + * RegPayloadLength + */ +#define RF_PAYLOADLENGTH_LENGTH 0x40 // Default + +/*! + * RegNodeAdrs + */ +#define RF_NODEADDRESS_ADDRESS 0x00 + +/*! + * RegBroadcastAdrs + */ +#define RF_BROADCASTADDRESS_ADDRESS 0x00 + +/*! + * RegFifoThresh + */ +#define RF_FIFOTHRESH_TXSTARTCONDITION_MASK 0x7F +#define RF_FIFOTHRESH_TXSTARTCONDITION_FIFOTHRESH 0x00 // Default +#define RF_FIFOTHRESH_TXSTARTCONDITION_FIFONOTEMPTY 0x80 + +#define RF_FIFOTHRESH_FIFOTHRESHOLD_MASK 0xC0 +#define RF_FIFOTHRESH_FIFOTHRESHOLD_THRESHOLD 0x0F // Default + +/*! + * RegSeqConfig1 + */ +#define RF_SEQCONFIG1_SEQUENCER_START 0x80 + +#define RF_SEQCONFIG1_SEQUENCER_STOP 0x40 + +#define RF_SEQCONFIG1_IDLEMODE_MASK 0xDF +#define RF_SEQCONFIG1_IDLEMODE_SLEEP 0x20 +#define RF_SEQCONFIG1_IDLEMODE_STANDBY 0x00 // Default + +#define RF_SEQCONFIG1_FROMSTART_MASK 0xE7 +#define RF_SEQCONFIG1_FROMSTART_TOLPS 0x00 // Default +#define RF_SEQCONFIG1_FROMSTART_TORX 0x08 +#define RF_SEQCONFIG1_FROMSTART_TOTX 0x10 +#define RF_SEQCONFIG1_FROMSTART_TOTX_ONFIFOLEVEL 0x18 + +#define RF_SEQCONFIG1_LPS_MASK 0xFB +#define RF_SEQCONFIG1_LPS_SEQUENCER_OFF 0x00 // Default +#define RF_SEQCONFIG1_LPS_IDLE 0x04 + +#define RF_SEQCONFIG1_FROMIDLE_MASK 0xFD +#define RF_SEQCONFIG1_FROMIDLE_TOTX 0x00 // Default +#define RF_SEQCONFIG1_FROMIDLE_TORX 0x02 + +#define RF_SEQCONFIG1_FROMTX_MASK 0xFE +#define RF_SEQCONFIG1_FROMTX_TOLPS 0x00 // Default +#define RF_SEQCONFIG1_FROMTX_TORX 0x01 + +/*! + * RegSeqConfig2 + */ +#define RF_SEQCONFIG2_FROMRX_MASK 0x1F +#define RF_SEQCONFIG2_FROMRX_TOUNUSED_000 0x00 // Default +#define RF_SEQCONFIG2_FROMRX_TORXPKT_ONPLDRDY 0x20 +#define RF_SEQCONFIG2_FROMRX_TOLPS_ONPLDRDY 0x40 +#define RF_SEQCONFIG2_FROMRX_TORXPKT_ONCRCOK 0x60 +#define RF_SEQCONFIG2_FROMRX_TOSEQUENCEROFF_ONRSSI 0x80 +#define RF_SEQCONFIG2_FROMRX_TOSEQUENCEROFF_ONSYNC 0xA0 +#define RF_SEQCONFIG2_FROMRX_TOSEQUENCEROFF_ONPREAMBLE 0xC0 +#define RF_SEQCONFIG2_FROMRX_TOUNUSED_111 0xE0 + +#define RF_SEQCONFIG2_FROMRXTIMEOUT_MASK 0xE7 +#define RF_SEQCONFIG2_FROMRXTIMEOUT_TORXRESTART 0x00 // Default +#define RF_SEQCONFIG2_FROMRXTIMEOUT_TOTX 0x08 +#define RF_SEQCONFIG2_FROMRXTIMEOUT_TOLPS 0x10 +#define RF_SEQCONFIG2_FROMRXTIMEOUT_TOSEQUENCEROFF 0x18 + +#define RF_SEQCONFIG2_FROMRXPKT_MASK 0xF8 +#define RF_SEQCONFIG2_FROMRXPKT_TOSEQUENCEROFF 0x00 // Default +#define RF_SEQCONFIG2_FROMRXPKT_TOTX_ONFIFOEMPTY 0x01 +#define RF_SEQCONFIG2_FROMRXPKT_TOLPS 0x02 +#define RF_SEQCONFIG2_FROMRXPKT_TOSYNTHESIZERRX 0x03 +#define RF_SEQCONFIG2_FROMRXPKT_TORX 0x04 + +/*! + * RegTimerResol + */ +#define RF_TIMERRESOL_TIMER1RESOL_MASK 0xF3 +#define RF_TIMERRESOL_TIMER1RESOL_OFF 0x00 // Default +#define RF_TIMERRESOL_TIMER1RESOL_000064_US 0x04 +#define RF_TIMERRESOL_TIMER1RESOL_004100_US 0x08 +#define RF_TIMERRESOL_TIMER1RESOL_262000_US 0x0C + +#define RF_TIMERRESOL_TIMER2RESOL_MASK 0xFC +#define RF_TIMERRESOL_TIMER2RESOL_OFF 0x00 // Default +#define RF_TIMERRESOL_TIMER2RESOL_000064_US 0x01 +#define RF_TIMERRESOL_TIMER2RESOL_004100_US 0x02 +#define RF_TIMERRESOL_TIMER2RESOL_262000_US 0x03 + +/*! + * RegTimer1Coef + */ +#define RF_TIMER1COEF_TIMER1COEFFICIENT 0xF5 // Default + +/*! + * RegTimer2Coef + */ +#define RF_TIMER2COEF_TIMER2COEFFICIENT 0x20 // Default + +/*! + * RegImageCal + */ +#define RF_IMAGECAL_AUTOIMAGECAL_MASK 0x7F +#define RF_IMAGECAL_AUTOIMAGECAL_ON 0x80 +#define RF_IMAGECAL_AUTOIMAGECAL_OFF 0x00 // Default + +#define RF_IMAGECAL_IMAGECAL_MASK 0xBF +#define RF_IMAGECAL_IMAGECAL_START 0x40 + +#define RF_IMAGECAL_IMAGECAL_RUNNING 0x20 +#define RF_IMAGECAL_IMAGECAL_DONE 0x00 // Default + +#define RF_IMAGECAL_TEMPCHANGE_HIGHER 0x08 +#define RF_IMAGECAL_TEMPCHANGE_LOWER 0x00 + +#define RF_IMAGECAL_TEMPTHRESHOLD_MASK 0xF9 +#define RF_IMAGECAL_TEMPTHRESHOLD_05 0x00 +#define RF_IMAGECAL_TEMPTHRESHOLD_10 0x02 // Default +#define RF_IMAGECAL_TEMPTHRESHOLD_15 0x04 +#define RF_IMAGECAL_TEMPTHRESHOLD_20 0x06 + +#define RF_IMAGECAL_TEMPMONITOR_MASK 0xFE +#define RF_IMAGECAL_TEMPMONITOR_ON 0x00 // Default +#define RF_IMAGECAL_TEMPMONITOR_OFF 0x01 + +/*! + * RegTemp (Read Only) + */ + +/*! + * RegLowBat + */ +#define RF_LOWBAT_MASK 0xF7 +#define RF_LOWBAT_ON 0x08 +#define RF_LOWBAT_OFF 0x00 // Default + +#define RF_LOWBAT_TRIM_MASK 0xF8 +#define RF_LOWBAT_TRIM_1695 0x00 +#define RF_LOWBAT_TRIM_1764 0x01 +#define RF_LOWBAT_TRIM_1835 0x02 // Default +#define RF_LOWBAT_TRIM_1905 0x03 +#define RF_LOWBAT_TRIM_1976 0x04 +#define RF_LOWBAT_TRIM_2045 0x05 +#define RF_LOWBAT_TRIM_2116 0x06 +#define RF_LOWBAT_TRIM_2185 0x07 + +/*! + * RegIrqFlags1 + */ +#define RF_IRQFLAGS1_MODEREADY 0x80 + +#define RF_IRQFLAGS1_RXREADY 0x40 + +#define RF_IRQFLAGS1_TXREADY 0x20 + +#define RF_IRQFLAGS1_PLLLOCK 0x10 + +#define RF_IRQFLAGS1_RSSI 0x08 + +#define RF_IRQFLAGS1_TIMEOUT 0x04 + +#define RF_IRQFLAGS1_PREAMBLEDETECT 0x02 + +#define RF_IRQFLAGS1_SYNCADDRESSMATCH 0x01 + +/*! + * RegIrqFlags2 + */ +#define RF_IRQFLAGS2_FIFOFULL 0x80 + +#define RF_IRQFLAGS2_FIFOEMPTY 0x40 + +#define RF_IRQFLAGS2_FIFOLEVEL 0x20 + +#define RF_IRQFLAGS2_FIFOOVERRUN 0x10 + +#define RF_IRQFLAGS2_PACKETSENT 0x08 + +#define RF_IRQFLAGS2_PAYLOADREADY 0x04 + +#define RF_IRQFLAGS2_CRCOK 0x02 + +#define RF_IRQFLAGS2_LOWBAT 0x01 + +/*! + * RegDioMapping1 + */ +#define RF_DIOMAPPING1_DIO0_MASK 0x3F +#define RF_DIOMAPPING1_DIO0_00 0x00 // Default +#define RF_DIOMAPPING1_DIO0_01 0x40 +#define RF_DIOMAPPING1_DIO0_10 0x80 +#define RF_DIOMAPPING1_DIO0_11 0xC0 + +#define RF_DIOMAPPING1_DIO1_MASK 0xCF +#define RF_DIOMAPPING1_DIO1_00 0x00 // Default +#define RF_DIOMAPPING1_DIO1_01 0x10 +#define RF_DIOMAPPING1_DIO1_10 0x20 +#define RF_DIOMAPPING1_DIO1_11 0x30 + +#define RF_DIOMAPPING1_DIO2_MASK 0xF3 +#define RF_DIOMAPPING1_DIO2_00 0x00 // Default +#define RF_DIOMAPPING1_DIO2_01 0x04 +#define RF_DIOMAPPING1_DIO2_10 0x08 +#define RF_DIOMAPPING1_DIO2_11 0x0C + +#define RF_DIOMAPPING1_DIO3_MASK 0xFC +#define RF_DIOMAPPING1_DIO3_00 0x00 // Default +#define RF_DIOMAPPING1_DIO3_01 0x01 +#define RF_DIOMAPPING1_DIO3_10 0x02 +#define RF_DIOMAPPING1_DIO3_11 0x03 + +/*! + * RegDioMapping2 + */ +#define RF_DIOMAPPING2_DIO4_MASK 0x3F +#define RF_DIOMAPPING2_DIO4_00 0x00 // Default +#define RF_DIOMAPPING2_DIO4_01 0x40 +#define RF_DIOMAPPING2_DIO4_10 0x80 +#define RF_DIOMAPPING2_DIO4_11 0xC0 + +#define RF_DIOMAPPING2_DIO5_MASK 0xCF +#define RF_DIOMAPPING2_DIO5_00 0x00 // Default +#define RF_DIOMAPPING2_DIO5_01 0x10 +#define RF_DIOMAPPING2_DIO5_10 0x20 +#define RF_DIOMAPPING2_DIO5_11 0x30 + +#define RF_DIOMAPPING2_MAP_MASK 0xFE +#define RF_DIOMAPPING2_MAP_PREAMBLEDETECT 0x01 +#define RF_DIOMAPPING2_MAP_RSSI 0x00 // Default + +/*! + * RegVersion (Read Only) + */ + +/*! + * RegPllHop + */ +#define RF_PLLHOP_FASTHOP_MASK 0x7F +#define RF_PLLHOP_FASTHOP_ON 0x80 +#define RF_PLLHOP_FASTHOP_OFF 0x00 // Default + +/*! + * RegTcxo + */ +#define RF_TCXO_TCXOINPUT_MASK 0xEF +#define RF_TCXO_TCXOINPUT_ON 0x10 +#define RF_TCXO_TCXOINPUT_OFF 0x00 // Default + +/*! + * RegPaDac + */ +#define RF_PADAC_20DBM_MASK 0xF8 +#define RF_PADAC_20DBM_ON 0x07 +#define RF_PADAC_20DBM_OFF 0x04 // Default + +/*! + * RegFormerTemp + */ + +/*! + * RegBitrateFrac + */ +#define RF_BITRATEFRAC_MASK 0xF0 + +/*! + * RegAgcRef + */ + +/*! + * RegAgcThresh1 + */ + +/*! + * RegAgcThresh2 + */ + +/*! + * RegAgcThresh3 + */ + +/*! + * RegPll + */ +#define RF_PLL_BANDWIDTH_MASK 0x3F +#define RF_PLL_BANDWIDTH_75 0x00 +#define RF_PLL_BANDWIDTH_150 0x40 +#define RF_PLL_BANDWIDTH_225 0x80 +#define RF_PLL_BANDWIDTH_300 0xC0 // Default + +#endif // __SX1276_REGS_FSK_H__ diff --git a/lib/radio/sx1276/sx1276Regs-LoRa.h b/lib/radio/sx1276/sx1276Regs-LoRa.h new file mode 100755 index 0000000..edce9f7 --- /dev/null +++ b/lib/radio/sx1276/sx1276Regs-LoRa.h @@ -0,0 +1,565 @@ +/* + / _____) _ | | +( (____ _____ ____ _| |_ _____ ____| |__ + \____ \| ___ | (_ _) ___ |/ ___) _ \ + _____) ) ____| | | || |_| ____( (___| | | | +(______/|_____)_|_|_| \__)_____)\____)_| |_| + (C)2013 Semtech + +Description: SX1276 LoRa modem registers and bits definitions + +License: Revised BSD License, see LICENSE.TXT file include in the project + +Maintainer: Miguel Luis and Gregory Cristian +*/ +#ifndef __SX1276_REGS_LORA_H__ +#define __SX1276_REGS_LORA_H__ + +/*! + * ============================================================================ + * SX1276 Internal registers Address + * ============================================================================ + */ +#define REG_LR_FIFO 0x00 +// Common settings +#define REG_LR_OPMODE 0x01 +#define REG_LR_FRFMSB 0x06 +#define REG_LR_FRFMID 0x07 +#define REG_LR_FRFLSB 0x08 +// Tx settings +#define REG_LR_PACONFIG 0x09 +#define REG_LR_PARAMP 0x0A +#define REG_LR_OCP 0x0B +// Rx settings +#define REG_LR_LNA 0x0C +// LoRa registers +#define REG_LR_FIFOADDRPTR 0x0D +#define REG_LR_FIFOTXBASEADDR 0x0E +#define REG_LR_FIFORXBASEADDR 0x0F +#define REG_LR_FIFORXCURRENTADDR 0x10 +#define REG_LR_IRQFLAGSMASK 0x11 +#define REG_LR_IRQFLAGS 0x12 +#define REG_LR_RXNBBYTES 0x13 +#define REG_LR_RXHEADERCNTVALUEMSB 0x14 +#define REG_LR_RXHEADERCNTVALUELSB 0x15 +#define REG_LR_RXPACKETCNTVALUEMSB 0x16 +#define REG_LR_RXPACKETCNTVALUELSB 0x17 +#define REG_LR_MODEMSTAT 0x18 +#define REG_LR_PKTSNRVALUE 0x19 +#define REG_LR_PKTRSSIVALUE 0x1A +#define REG_LR_RSSIVALUE 0x1B +#define REG_LR_HOPCHANNEL 0x1C +#define REG_LR_MODEMCONFIG1 0x1D +#define REG_LR_MODEMCONFIG2 0x1E +#define REG_LR_SYMBTIMEOUTLSB 0x1F +#define REG_LR_PREAMBLEMSB 0x20 +#define REG_LR_PREAMBLELSB 0x21 +#define REG_LR_PAYLOADLENGTH 0x22 +#define REG_LR_PAYLOADMAXLENGTH 0x23 +#define REG_LR_HOPPERIOD 0x24 +#define REG_LR_FIFORXBYTEADDR 0x25 +#define REG_LR_MODEMCONFIG3 0x26 +#define REG_LR_FEIMSB 0x28 +#define REG_LR_FEIMID 0x29 +#define REG_LR_FEILSB 0x2A +#define REG_LR_RSSIWIDEBAND 0x2C +#define REG_LR_TEST2F 0x2F +#define REG_LR_TEST30 0x30 +#define REG_LR_DETECTOPTIMIZE 0x31 +#define REG_LR_INVERTIQ 0x33 +#define REG_LR_TEST36 0x36 +#define REG_LR_DETECTIONTHRESHOLD 0x37 +#define REG_LR_SYNCWORD 0x39 +#define REG_LR_TEST3A 0x3A +#define REG_LR_INVERTIQ2 0x3B + +// end of documented register in datasheet +// I/O settings +#define REG_LR_DIOMAPPING1 0x40 +#define REG_LR_DIOMAPPING2 0x41 +// Version +#define REG_LR_VERSION 0x42 +// Additional settings +#define REG_LR_PLLHOP 0x44 +#define REG_LR_TCXO 0x4B +#define REG_LR_PADAC 0x4D +#define REG_LR_FORMERTEMP 0x5B +#define REG_LR_BITRATEFRAC 0x5D +#define REG_LR_AGCREF 0x61 +#define REG_LR_AGCTHRESH1 0x62 +#define REG_LR_AGCTHRESH2 0x63 +#define REG_LR_AGCTHRESH3 0x64 +#define REG_LR_PLL 0x70 + +/*! + * ============================================================================ + * SX1276 LoRa bits control definition + * ============================================================================ + */ + +/*! + * RegFifo + */ + +/*! + * RegOpMode + */ +#define RFLR_OPMODE_LONGRANGEMODE_MASK 0x7F +#define RFLR_OPMODE_LONGRANGEMODE_OFF 0x00 // Default +#define RFLR_OPMODE_LONGRANGEMODE_ON 0x80 + +#define RFLR_OPMODE_ACCESSSHAREDREG_MASK 0xBF +#define RFLR_OPMODE_ACCESSSHAREDREG_ENABLE 0x40 +#define RFLR_OPMODE_ACCESSSHAREDREG_DISABLE 0x00 // Default + +#define RFLR_OPMODE_FREQMODE_ACCESS_MASK 0xF7 +#define RFLR_OPMODE_FREQMODE_ACCESS_LF 0x08 // Default +#define RFLR_OPMODE_FREQMODE_ACCESS_HF 0x00 + +#define RFLR_OPMODE_MASK 0xF8 +#define RFLR_OPMODE_SLEEP 0x00 +#define RFLR_OPMODE_STANDBY 0x01 // Default +#define RFLR_OPMODE_SYNTHESIZER_TX 0x02 +#define RFLR_OPMODE_TRANSMITTER 0x03 +#define RFLR_OPMODE_SYNTHESIZER_RX 0x04 +#define RFLR_OPMODE_RECEIVER 0x05 +// LoRa specific modes +#define RFLR_OPMODE_RECEIVER_SINGLE 0x06 +#define RFLR_OPMODE_CAD 0x07 + +/*! + * RegFrf (MHz) + */ +#define RFLR_FRFMSB_434_MHZ 0x6C // Default +#define RFLR_FRFMID_434_MHZ 0x80 // Default +#define RFLR_FRFLSB_434_MHZ 0x00 // Default + +/*! + * RegPaConfig + */ +#define RFLR_PACONFIG_PASELECT_MASK 0x7F +#define RFLR_PACONFIG_PASELECT_PABOOST 0x80 +#define RFLR_PACONFIG_PASELECT_RFO 0x00 // Default + +#define RFLR_PACONFIG_MAX_POWER_MASK 0x8F + +#define RFLR_PACONFIG_OUTPUTPOWER_MASK 0xF0 + +/*! + * RegPaRamp + */ +#define RFLR_PARAMP_TXBANDFORCE_MASK 0xEF +#define RFLR_PARAMP_TXBANDFORCE_BAND_SEL 0x10 +#define RFLR_PARAMP_TXBANDFORCE_AUTO 0x00 // Default + +#define RFLR_PARAMP_MASK 0xF0 +#define RFLR_PARAMP_3400_US 0x00 +#define RFLR_PARAMP_2000_US 0x01 +#define RFLR_PARAMP_1000_US 0x02 +#define RFLR_PARAMP_0500_US 0x03 +#define RFLR_PARAMP_0250_US 0x04 +#define RFLR_PARAMP_0125_US 0x05 +#define RFLR_PARAMP_0100_US 0x06 +#define RFLR_PARAMP_0062_US 0x07 +#define RFLR_PARAMP_0050_US 0x08 +#define RFLR_PARAMP_0040_US 0x09 // Default +#define RFLR_PARAMP_0031_US 0x0A +#define RFLR_PARAMP_0025_US 0x0B +#define RFLR_PARAMP_0020_US 0x0C +#define RFLR_PARAMP_0015_US 0x0D +#define RFLR_PARAMP_0012_US 0x0E +#define RFLR_PARAMP_0010_US 0x0F + +/*! + * RegOcp + */ +#define RFLR_OCP_MASK 0xDF +#define RFLR_OCP_ON 0x20 // Default +#define RFLR_OCP_OFF 0x00 + +#define RFLR_OCP_TRIM_MASK 0xE0 +#define RFLR_OCP_TRIM_045_MA 0x00 +#define RFLR_OCP_TRIM_050_MA 0x01 +#define RFLR_OCP_TRIM_055_MA 0x02 +#define RFLR_OCP_TRIM_060_MA 0x03 +#define RFLR_OCP_TRIM_065_MA 0x04 +#define RFLR_OCP_TRIM_070_MA 0x05 +#define RFLR_OCP_TRIM_075_MA 0x06 +#define RFLR_OCP_TRIM_080_MA 0x07 +#define RFLR_OCP_TRIM_085_MA 0x08 +#define RFLR_OCP_TRIM_090_MA 0x09 +#define RFLR_OCP_TRIM_095_MA 0x0A +#define RFLR_OCP_TRIM_100_MA 0x0B // Default +#define RFLR_OCP_TRIM_105_MA 0x0C +#define RFLR_OCP_TRIM_110_MA 0x0D +#define RFLR_OCP_TRIM_115_MA 0x0E +#define RFLR_OCP_TRIM_120_MA 0x0F +#define RFLR_OCP_TRIM_130_MA 0x10 +#define RFLR_OCP_TRIM_140_MA 0x11 +#define RFLR_OCP_TRIM_150_MA 0x12 +#define RFLR_OCP_TRIM_160_MA 0x13 +#define RFLR_OCP_TRIM_170_MA 0x14 +#define RFLR_OCP_TRIM_180_MA 0x15 +#define RFLR_OCP_TRIM_190_MA 0x16 +#define RFLR_OCP_TRIM_200_MA 0x17 +#define RFLR_OCP_TRIM_210_MA 0x18 +#define RFLR_OCP_TRIM_220_MA 0x19 +#define RFLR_OCP_TRIM_230_MA 0x1A +#define RFLR_OCP_TRIM_240_MA 0x1B + +/*! + * RegLna + */ +#define RFLR_LNA_GAIN_MASK 0x1F +#define RFLR_LNA_GAIN_G1 0x20 // Default +#define RFLR_LNA_GAIN_G2 0x40 +#define RFLR_LNA_GAIN_G3 0x60 +#define RFLR_LNA_GAIN_G4 0x80 +#define RFLR_LNA_GAIN_G5 0xA0 +#define RFLR_LNA_GAIN_G6 0xC0 + +#define RFLR_LNA_BOOST_LF_MASK 0xE7 +#define RFLR_LNA_BOOST_LF_DEFAULT 0x00 // Default + +#define RFLR_LNA_BOOST_HF_MASK 0xFC +#define RFLR_LNA_BOOST_HF_OFF 0x00 // Default +#define RFLR_LNA_BOOST_HF_ON 0x03 + +/*! + * RegFifoAddrPtr + */ +#define RFLR_FIFOADDRPTR 0x00 // Default + +/*! + * RegFifoTxBaseAddr + */ +#define RFLR_FIFOTXBASEADDR 0x80 // Default + +/*! + * RegFifoTxBaseAddr + */ +#define RFLR_FIFORXBASEADDR 0x00 // Default + +/*! + * RegFifoRxCurrentAddr (Read Only) + */ + +/*! + * RegIrqFlagsMask + */ +#define RFLR_IRQFLAGS_RXTIMEOUT_MASK 0x80 +#define RFLR_IRQFLAGS_RXDONE_MASK 0x40 +#define RFLR_IRQFLAGS_PAYLOADCRCERROR_MASK 0x20 +#define RFLR_IRQFLAGS_VALIDHEADER_MASK 0x10 +#define RFLR_IRQFLAGS_TXDONE_MASK 0x08 +#define RFLR_IRQFLAGS_CADDONE_MASK 0x04 +#define RFLR_IRQFLAGS_FHSSCHANGEDCHANNEL_MASK 0x02 +#define RFLR_IRQFLAGS_CADDETECTED_MASK 0x01 + +/*! + * RegIrqFlags + */ +#define RFLR_IRQFLAGS_RXTIMEOUT 0x80 +#define RFLR_IRQFLAGS_RXDONE 0x40 +#define RFLR_IRQFLAGS_PAYLOADCRCERROR 0x20 +#define RFLR_IRQFLAGS_VALIDHEADER 0x10 +#define RFLR_IRQFLAGS_TXDONE 0x08 +#define RFLR_IRQFLAGS_CADDONE 0x04 +#define RFLR_IRQFLAGS_FHSSCHANGEDCHANNEL 0x02 +#define RFLR_IRQFLAGS_CADDETECTED 0x01 + +/*! + * RegFifoRxNbBytes (Read Only) + */ + +/*! + * RegRxHeaderCntValueMsb (Read Only) + */ + +/*! + * RegRxHeaderCntValueLsb (Read Only) + */ + +/*! + * RegRxPacketCntValueMsb (Read Only) + */ + +/*! + * RegRxPacketCntValueLsb (Read Only) + */ + +/*! + * RegModemStat (Read Only) + */ +#define RFLR_MODEMSTAT_RX_CR_MASK 0x1F +#define RFLR_MODEMSTAT_MODEM_STATUS_MASK 0xE0 + +/*! + * RegPktSnrValue (Read Only) + */ + +/*! + * RegPktRssiValue (Read Only) + */ + +/*! + * RegRssiValue (Read Only) + */ + +/*! + * RegHopChannel (Read Only) + */ +#define RFLR_HOPCHANNEL_PLL_LOCK_TIMEOUT_MASK 0x7F +#define RFLR_HOPCHANNEL_PLL_LOCK_FAIL 0x80 +#define RFLR_HOPCHANNEL_PLL_LOCK_SUCCEED 0x00 // Default + +#define RFLR_HOPCHANNEL_CRCONPAYLOAD_MASK 0xBF +#define RFLR_HOPCHANNEL_CRCONPAYLOAD_ON 0x40 +#define RFLR_HOPCHANNEL_CRCONPAYLOAD_OFF 0x00 // Default + +#define RFLR_HOPCHANNEL_CHANNEL_MASK 0x3F + +/*! + * RegModemConfig1 + */ +#define RFLR_MODEMCONFIG1_BW_MASK 0x0F +#define RFLR_MODEMCONFIG1_BW_7_81_KHZ 0x00 +#define RFLR_MODEMCONFIG1_BW_10_41_KHZ 0x10 +#define RFLR_MODEMCONFIG1_BW_15_62_KHZ 0x20 +#define RFLR_MODEMCONFIG1_BW_20_83_KHZ 0x30 +#define RFLR_MODEMCONFIG1_BW_31_25_KHZ 0x40 +#define RFLR_MODEMCONFIG1_BW_41_66_KHZ 0x50 +#define RFLR_MODEMCONFIG1_BW_62_50_KHZ 0x60 +#define RFLR_MODEMCONFIG1_BW_125_KHZ 0x70 // Default +#define RFLR_MODEMCONFIG1_BW_250_KHZ 0x80 +#define RFLR_MODEMCONFIG1_BW_500_KHZ 0x90 + +#define RFLR_MODEMCONFIG1_CODINGRATE_MASK 0xF1 +#define RFLR_MODEMCONFIG1_CODINGRATE_4_5 0x02 +#define RFLR_MODEMCONFIG1_CODINGRATE_4_6 0x04 // Default +#define RFLR_MODEMCONFIG1_CODINGRATE_4_7 0x06 +#define RFLR_MODEMCONFIG1_CODINGRATE_4_8 0x08 + +#define RFLR_MODEMCONFIG1_IMPLICITHEADER_MASK 0xFE +#define RFLR_MODEMCONFIG1_IMPLICITHEADER_ON 0x01 +#define RFLR_MODEMCONFIG1_IMPLICITHEADER_OFF 0x00 // Default + +/*! + * RegModemConfig2 + */ +#define RFLR_MODEMCONFIG2_SF_MASK 0x0F +#define RFLR_MODEMCONFIG2_SF_6 0x60 +#define RFLR_MODEMCONFIG2_SF_7 0x70 // Default +#define RFLR_MODEMCONFIG2_SF_8 0x80 +#define RFLR_MODEMCONFIG2_SF_9 0x90 +#define RFLR_MODEMCONFIG2_SF_10 0xA0 +#define RFLR_MODEMCONFIG2_SF_11 0xB0 +#define RFLR_MODEMCONFIG2_SF_12 0xC0 + +#define RFLR_MODEMCONFIG2_TXCONTINUOUSMODE_MASK 0xF7 +#define RFLR_MODEMCONFIG2_TXCONTINUOUSMODE_ON 0x08 +#define RFLR_MODEMCONFIG2_TXCONTINUOUSMODE_OFF 0x00 + +#define RFLR_MODEMCONFIG2_RXPAYLOADCRC_MASK 0xFB +#define RFLR_MODEMCONFIG2_RXPAYLOADCRC_ON 0x04 +#define RFLR_MODEMCONFIG2_RXPAYLOADCRC_OFF 0x00 // Default + +#define RFLR_MODEMCONFIG2_SYMBTIMEOUTMSB_MASK 0xFC +#define RFLR_MODEMCONFIG2_SYMBTIMEOUTMSB 0x00 // Default + +/*! + * RegSymbTimeoutLsb + */ +#define RFLR_SYMBTIMEOUTLSB_SYMBTIMEOUT 0x64 // Default + +/*! + * RegPreambleLengthMsb + */ +#define RFLR_PREAMBLELENGTHMSB 0x00 // Default + +/*! + * RegPreambleLengthLsb + */ +#define RFLR_PREAMBLELENGTHLSB 0x08 // Default + +/*! + * RegPayloadLength + */ +#define RFLR_PAYLOADLENGTH 0x0E // Default + +/*! + * RegPayloadMaxLength + */ +#define RFLR_PAYLOADMAXLENGTH 0xFF // Default + +/*! + * RegHopPeriod + */ +#define RFLR_HOPPERIOD_FREQFOPPINGPERIOD 0x00 // Default + +/*! + * RegFifoRxByteAddr (Read Only) + */ + +/*! + * RegModemConfig3 + */ +#define RFLR_MODEMCONFIG3_LOWDATARATEOPTIMIZE_MASK 0xF7 +#define RFLR_MODEMCONFIG3_LOWDATARATEOPTIMIZE_ON 0x08 +#define RFLR_MODEMCONFIG3_LOWDATARATEOPTIMIZE_OFF 0x00 // Default + +#define RFLR_MODEMCONFIG3_AGCAUTO_MASK 0xFB +#define RFLR_MODEMCONFIG3_AGCAUTO_ON 0x04 // Default +#define RFLR_MODEMCONFIG3_AGCAUTO_OFF 0x00 + +/*! + * RegFeiMsb (Read Only) + */ + +/*! + * RegFeiMid (Read Only) + */ + +/*! + * RegFeiLsb (Read Only) + */ + +/*! + * RegRssiWideband (Read Only) + */ + +/*! + * RegDetectOptimize + */ +#define RFLR_DETECTIONOPTIMIZE_MASK 0xF8 +#define RFLR_DETECTIONOPTIMIZE_SF7_TO_SF12 0x03 // Default +#define RFLR_DETECTIONOPTIMIZE_SF6 0x05 + +/*! + * RegInvertIQ + */ +#define RFLR_INVERTIQ_RX_MASK 0xBF +#define RFLR_INVERTIQ_RX_OFF 0x00 +#define RFLR_INVERTIQ_RX_ON 0x40 +#define RFLR_INVERTIQ_TX_MASK 0xFE +#define RFLR_INVERTIQ_TX_OFF 0x01 +#define RFLR_INVERTIQ_TX_ON 0x00 + +/*! + * RegDetectionThreshold + */ +#define RFLR_DETECTIONTHRESH_SF7_TO_SF12 0x0A // Default +#define RFLR_DETECTIONTHRESH_SF6 0x0C + +/*! + * RegInvertIQ2 + */ +#define RFLR_INVERTIQ2_ON 0x19 +#define RFLR_INVERTIQ2_OFF 0x1D + +/*! + * RegDioMapping1 + */ +#define RFLR_DIOMAPPING1_DIO0_MASK 0x3F +#define RFLR_DIOMAPPING1_DIO0_00 0x00 // Default +#define RFLR_DIOMAPPING1_DIO0_01 0x40 +#define RFLR_DIOMAPPING1_DIO0_10 0x80 +#define RFLR_DIOMAPPING1_DIO0_11 0xC0 + +#define RFLR_DIOMAPPING1_DIO1_MASK 0xCF +#define RFLR_DIOMAPPING1_DIO1_00 0x00 // Default +#define RFLR_DIOMAPPING1_DIO1_01 0x10 +#define RFLR_DIOMAPPING1_DIO1_10 0x20 +#define RFLR_DIOMAPPING1_DIO1_11 0x30 + +#define RFLR_DIOMAPPING1_DIO2_MASK 0xF3 +#define RFLR_DIOMAPPING1_DIO2_00 0x00 // Default +#define RFLR_DIOMAPPING1_DIO2_01 0x04 +#define RFLR_DIOMAPPING1_DIO2_10 0x08 +#define RFLR_DIOMAPPING1_DIO2_11 0x0C + +#define RFLR_DIOMAPPING1_DIO3_MASK 0xFC +#define RFLR_DIOMAPPING1_DIO3_00 0x00 // Default +#define RFLR_DIOMAPPING1_DIO3_01 0x01 +#define RFLR_DIOMAPPING1_DIO3_10 0x02 +#define RFLR_DIOMAPPING1_DIO3_11 0x03 + +/*! + * RegDioMapping2 + */ +#define RFLR_DIOMAPPING2_DIO4_MASK 0x3F +#define RFLR_DIOMAPPING2_DIO4_00 0x00 // Default +#define RFLR_DIOMAPPING2_DIO4_01 0x40 +#define RFLR_DIOMAPPING2_DIO4_10 0x80 +#define RFLR_DIOMAPPING2_DIO4_11 0xC0 + +#define RFLR_DIOMAPPING2_DIO5_MASK 0xCF +#define RFLR_DIOMAPPING2_DIO5_00 0x00 // Default +#define RFLR_DIOMAPPING2_DIO5_01 0x10 +#define RFLR_DIOMAPPING2_DIO5_10 0x20 +#define RFLR_DIOMAPPING2_DIO5_11 0x30 + +#define RFLR_DIOMAPPING2_MAP_MASK 0xFE +#define RFLR_DIOMAPPING2_MAP_PREAMBLEDETECT 0x01 +#define RFLR_DIOMAPPING2_MAP_RSSI 0x00 // Default + +/*! + * RegVersion (Read Only) + */ + +/*! + * RegPllHop + */ +#define RFLR_PLLHOP_FASTHOP_MASK 0x7F +#define RFLR_PLLHOP_FASTHOP_ON 0x80 +#define RFLR_PLLHOP_FASTHOP_OFF 0x00 // Default + +/*! + * RegTcxo + */ +#define RFLR_TCXO_TCXOINPUT_MASK 0xEF +#define RFLR_TCXO_TCXOINPUT_ON 0x10 +#define RFLR_TCXO_TCXOINPUT_OFF 0x00 // Default + +/*! + * RegPaDac + */ +#define RFLR_PADAC_20DBM_MASK 0xF8 +#define RFLR_PADAC_20DBM_ON 0x07 +#define RFLR_PADAC_20DBM_OFF 0x04 // Default + +/*! + * RegFormerTemp + */ + +/*! + * RegBitrateFrac + */ +#define RF_BITRATEFRAC_MASK 0xF0 + +/*! + * RegAgcRef + */ + +/*! + * RegAgcThresh1 + */ + +/*! + * RegAgcThresh2 + */ + +/*! + * RegAgcThresh3 + */ + +/*! + * RegPll + */ +#define RF_PLL_BANDWIDTH_MASK 0x3F +#define RF_PLL_BANDWIDTH_75 0x00 +#define RF_PLL_BANDWIDTH_150 0x40 +#define RF_PLL_BANDWIDTH_225 0x80 +#define RF_PLL_BANDWIDTH_300 0xC0 // Default + +#endif // __SX1276_REGS_LORA_H__ diff --git a/lib/readme.txt b/lib/readme.txt new file mode 100644 index 0000000..dbadc3d --- /dev/null +++ b/lib/readme.txt @@ -0,0 +1,36 @@ + +This directory is intended for the project specific (private) libraries. +PlatformIO will compile them to static libraries and link to executable file. + +The source code of each library should be placed in separate directory, like +"lib/private_lib/[here are source files]". + +For example, see how can be organized `Foo` and `Bar` libraries: + +|--lib +| |--Bar +| | |--docs +| | |--examples +| | |--src +| | |- Bar.c +| | |- Bar.h +| |--Foo +| | |- Foo.c +| | |- Foo.h +| |- readme.txt --> THIS FILE +|- platformio.ini +|--src + |- main.c + +Then in `src/main.c` you should use: + +#include +#include + +// rest H/C/CPP code + +PlatformIO will find your libraries automatically, configure preprocessor's +include paths and build them. + +More information about PlatformIO Library Dependency Finder +- http://docs.platformio.org/page/librarymanager/ldf.html diff --git a/lib/system_utils/adc.h b/lib/system_utils/adc.h new file mode 100755 index 0000000..e1ffdd4 --- /dev/null +++ b/lib/system_utils/adc.h @@ -0,0 +1,50 @@ +/* + / _____) _ | | +( (____ _____ ____ _| |_ _____ ____| |__ + \____ \| ___ | (_ _) ___ |/ ___) _ \ + _____) ) ____| | | || |_| ____( (___| | | | +(______/|_____)_|_|_| \__)_____)\____)_| |_| + (C)2013 Semtech + +Description: Implements a generic ADC driver + +License: Revised BSD License, see LICENSE.TXT file include in the project + +Maintainer: Miguel Luis and Gregory Cristian +*/ +#ifndef __ADC_H__ +#define __ADC_H__ + +/*! + * ADC object type definition + */ +typedef struct +{ + Gpio_t AdcInput; +}Adc_t; + +/*! + * \brief Initializes the ADC input + * + * \param [IN] obj ADC object + * \param [IN] scl ADC input pin name to be used + */ +void AdcInit( Adc_t *obj, PinNames adcInput ); + +/*! + * \brief DeInitializes the ADC + * + * \param [IN] obj ADC object + */ +void AdcDeInit( Adc_t *obj ); + +/*! + * \brief Read the analogue voltage value + * + * \param [IN] obj ADC object + * \param [IN] channel ADC channel + * \retval value Analogue pin value + */ +uint16_t AdcReadChannel( Adc_t *obj, uint32_t channel ); + +#endif // __ADC_H__ diff --git a/lib/system_utils/delay.h b/lib/system_utils/delay.h new file mode 100755 index 0000000..384b390 --- /dev/null +++ b/lib/system_utils/delay.h @@ -0,0 +1,29 @@ +/* + / _____) _ | | +( (____ _____ ____ _| |_ _____ ____| |__ + \____ \| ___ | (_ _) ___ |/ ___) _ \ + _____) ) ____| | | || |_| ____( (___| | | | +(______/|_____)_|_|_| \__)_____)\____)_| |_| + (C)2013 Semtech + +Description: Delay functions implementation + +License: Revised BSD License, see LICENSE.TXT file include in the project + +Maintainer: Miguel Luis and Gregory Cristian +*/ +#ifndef __DELAY_H__ +#define __DELAY_H__ + +/*! + * Blocking delay of "s" seconds + */ +void Delay( float s ); + +/*! + * Blocking delay of "ms" milliseconds + */ +void DelayMs( uint32_t ms ); + +#endif // __DELAY_H__ + diff --git a/lib/system_utils/eeprom.h b/lib/system_utils/eeprom.h new file mode 100755 index 0000000..0d48c13 --- /dev/null +++ b/lib/system_utils/eeprom.h @@ -0,0 +1,56 @@ +/* + / _____) _ | | +( (____ _____ ____ _| |_ _____ ____| |__ + \____ \| ___ | (_ _) ___ |/ ___) _ \ + _____) ) ____| | | || |_| ____( (___| | | | +(______/|_____)_|_|_| \__)_____)\____)_| |_| + (C)2013 Semtech + +Description: Timer objects and scheduling management + +License: Revised BSD License, see LICENSE.TXT file include in the project + +Maintainer: Miguel Luis and Gregory Cristian +*/ +#ifndef __EEPROM_H__ +#define __EEPROM_H__ + +/*! + * Writes the given buffer to the EEPROM at the specified address. + * + * \param[IN] addr EEPROM address to write to + * \param[IN] buffer Pointer to the buffer to be written. + * \param[IN] size Size of the buffer to be written. + * \retval status [SUCCESS, FAIL] + */ +uint8_t EepromWriteBuffer( uint16_t addr, uint8_t *buffer, uint16_t size ); + +/*! + * Reads the EEPROM at the specified address to the given buffer. + * + * \param[IN] addr EEPROM address to read from + * \param[OUT] buffer Pointer to the buffer to be written with read data. + * \param[IN] size Size of the buffer to be read. + * \retval status [SUCCESS, FAIL] + */ +uint8_t EepromReadBuffer( uint16_t addr, uint8_t *buffer, uint16_t size ); + +/*! + * Sets the device address. + * + * \remark Useful for I2C external EEPROMS + * + * \param[IN] addr External EEPROM address + */ +void EepromSetDeviceAddr( uint8_t addr ); + +/*! + * Gets the current device address. + * + * \remark Useful for I2C external EEPROMS + * + * \retval addr External EEPROM address + */ +uint8_t EepromGetDeviceAddr( void ); + +#endif // __EEPROM_H__ diff --git a/lib/system_utils/fifo.h b/lib/system_utils/fifo.h new file mode 100755 index 0000000..0fe30b9 --- /dev/null +++ b/lib/system_utils/fifo.h @@ -0,0 +1,80 @@ +/* + / _____) _ | | +( (____ _____ ____ _| |_ _____ ____| |__ + \____ \| ___ | (_ _) ___ |/ ___) _ \ + _____) ) ____| | | || |_| ____( (___| | | | +(______/|_____)_|_|_| \__)_____)\____)_| |_| + (C)2013 Semtech + +Description: Implements a FIFO buffer + +License: Revised BSD License, see LICENSE.TXT file include in the project + +Maintainer: Miguel Luis and Gregory Cristian +*/ +#ifndef __FIFO_H__ +#define __FIFO_H__ + +#include +#include + +/*! + * FIFO structure + */ +typedef struct Fifo_s +{ + uint16_t Begin; + uint16_t End; + uint8_t *Data; + uint16_t Size; +}Fifo_t; + +/*! + * Initializes the FIFO structure + * + * \param [IN] fifo Pointer to the FIFO object + * \param [IN] buffer Buffer to be used as FIFO + * \param [IN] size Size of the buffer + */ +void FifoInit( Fifo_t *fifo, uint8_t *buffer, uint16_t size ); + +/*! + * Pushes data to the FIFO + * + * \param [IN] fifo Pointer to the FIFO object + * \param [IN] data Data to be pushed into the FIFO + */ +void FifoPush( Fifo_t *fifo, uint8_t data ); + +/*! + * Pops data from the FIFO + * + * \param [IN] fifo Pointer to the FIFO object + * \retval data Data popped from the FIFO + */ +uint8_t FifoPop( Fifo_t *fifo ); + +/*! + * Flushes the FIFO + * + * \param [IN] fifo Pointer to the FIFO object + */ +void FifoFlush( Fifo_t *fifo ); + +/*! + * Checks if the FIFO is empty + * + * \param [IN] fifo Pointer to the FIFO object + * \retval isEmpty true: FIFO is empty, false FIFO is not empty + */ +bool IsFifoEmpty( Fifo_t *fifo ); + +/*! + * Checks if the FIFO is full + * + * \param [IN] fifo Pointer to the FIFO object + * \retval isFull true: FIFO is full, false FIFO is not full + */ +bool IsFifoFull( Fifo_t *fifo ); + +#endif // __FIFO_H__ diff --git a/lib/system_utils/gpio.h b/lib/system_utils/gpio.h new file mode 100755 index 0000000..d3332d4 --- /dev/null +++ b/lib/system_utils/gpio.h @@ -0,0 +1,168 @@ +/* + / _____) _ | | +( (____ _____ ____ _| |_ _____ ____| |__ + \____ \| ___ | (_ _) ___ |/ ___) _ \ + _____) ) ____| | | || |_| ____( (___| | | | +(______/|_____)_|_|_| \__)_____)\____)_| |_| + (C)2013 Semtech + +Description: Generic GPIO driver implementation + +Comment: Relies on the specific board GPIO implementation as well as on + IO expander driver implementation if one is available on the target + board. + +License: Revised BSD License, see LICENSE.TXT file include in the project + +Maintainer: Miguel Luis and Gregory Cristian +*/ +#ifndef __GPIO_H__ +#define __GPIO_H__ + +#include "pinName-board.h" +#include "pinName-ioe.h" + +/*! + * Board GPIO pin names + */ +typedef enum +{ + MCU_PINS, + IOE_PINS, + + // Not connected + NC = (int)0xFFFFFFFF +}PinNames; + +/*! + * Operation Mode for the GPIO + */ +typedef enum +{ + PIN_INPUT = 0, + PIN_OUTPUT, + PIN_ALTERNATE_FCT, + PIN_ANALOGIC +}PinModes; + +/*! + * Add a pull-up, a pull-down or nothing on the GPIO line + */ +typedef enum +{ + PIN_NO_PULL = 0, + PIN_PULL_UP, + PIN_PULL_DOWN +}PinTypes; + +/*! + * Define the GPIO as Push-pull type or Open Drain + */ +typedef enum +{ + PIN_PUSH_PULL = 0, + PIN_OPEN_DRAIN +}PinConfigs; + +/*! + * Define the GPIO IRQ on a rising, falling or both edges + */ +typedef enum +{ + NO_IRQ = 0, + IRQ_RISING_EDGE, + IRQ_FALLING_EDGE, + IRQ_RISING_FALLING_EDGE +}IrqModes; + +/*! + * Define the IRQ priority on the GPIO + */ +typedef enum +{ + IRQ_VERY_LOW_PRIORITY = 0, + IRQ_LOW_PRIORITY, + IRQ_MEDIUM_PRIORITY, + IRQ_HIGH_PRIORITY, + IRQ_VERY_HIGH_PRIORITY +}IrqPriorities; + +/*! + * Structure for the GPIO + */ +typedef struct +{ + PinNames pin; + uint16_t pinIndex; + void *port; + uint16_t portIndex; + PinTypes pull; +}Gpio_t; + +/*! + * GPIO IRQ handler function prototype + */ +typedef void( GpioIrqHandler )( void ); + +/*! + * GPIO Expander IRQ handler function prototype + */ +typedef void( GpioIoeIrqHandler )( void ); + +/*! + * \brief Initializes the given GPIO object + * + * \param [IN] obj Pointer to the GPIO object + * \param [IN] pin Pin name ( please look in pinName-board.h file ) + * \param [IN] mode Pin mode [PIN_INPUT, PIN_OUTPUT, + * PIN_ALTERNATE_FCT, PIN_ANALOGIC] + * \param [IN] config Pin config [PIN_PUSH_PULL, PIN_OPEN_DRAIN] + * \param [IN] type Pin type [PIN_NO_PULL, PIN_PULL_UP, PIN_PULL_DOWN] + * \param [IN] value Default output value at initialization + */ +void GpioInit( Gpio_t *obj, PinNames pin, PinModes mode, PinConfigs config, PinTypes type, uint32_t value ); + +/*! + * \brief GPIO IRQ Initialization + * + * \param [IN] obj Pointer to the GPIO object + * \param [IN] irqMode IRQ mode [NO_IRQ, IRQ_RISING_EDGE, + * IRQ_FALLING_EDGE, IRQ_RISING_FALLING_EDGE] + * \param [IN] irqPriority IRQ priority [IRQ_VERY_LOW_PRIORITY, IRQ_LOW_PRIORITY + * IRQ_MEDIUM_PRIORITY, IRQ_HIGH_PRIORITY + * IRQ_VERY_HIGH_PRIORITY] + * \param [IN] irqHandler Callback function pointer + */ +void GpioSetInterrupt( Gpio_t *obj, IrqModes irqMode, IrqPriorities irqPriority, GpioIrqHandler *irqHandler ); + +/*! + * \brief Removes the interrupt from the object + * + * \param [IN] obj Pointer to the GPIO object + */ +void GpioRemoveInterrupt( Gpio_t *obj ); + +/*! + * \brief Writes the given value to the GPIO output + * + * \param [IN] obj Pointer to the GPIO object + * \param [IN] value New GPIO output value + */ +void GpioWrite( Gpio_t *obj, uint32_t value ); + +/*! + * \brief Toggle the value to the GPIO output + * + * \param [IN] obj Pointer to the GPIO object + */ +void GpioToggle( Gpio_t *obj ); + +/*! + * \brief Reads the current GPIO input value + * + * \param [IN] obj Pointer to the GPIO object + * \retval value Current GPIO input value + */ +uint32_t GpioRead( Gpio_t *obj ); + +#endif // __GPIO_H__ diff --git a/lib/system_utils/gps.h b/lib/system_utils/gps.h new file mode 100755 index 0000000..4837f59 --- /dev/null +++ b/lib/system_utils/gps.h @@ -0,0 +1,144 @@ +/* + / _____) _ | | +( (____ _____ ____ _| |_ _____ ____| |__ + \____ \| ___ | (_ _) ___ |/ ___) _ \ + _____) ) ____| | | || |_| ____( (___| | | | +(______/|_____)_|_|_| \__)_____)\____)_| |_| + (C)2013 Semtech + +Description: Generic driver for the GPS receiver UP501 + +License: Revised BSD License, see LICENSE.TXT file include in the project + +Maintainer: Miguel Luis and Gregory Cristian +*/ +#ifndef __GPS_H__ +#define __GPS_H__ + +/* Structure to handle the GPS parsed data in ASCII */ +typedef struct +{ + char NmeaDataType[6]; + char NmeaUtcTime[11]; + char NmeaDataStatus[2]; + char NmeaLatitude[10]; + char NmeaLatitudePole[2]; + char NmeaLongitude[11]; + char NmeaLongitudePole[2]; + char NmeaFixQuality[2]; + char NmeaSatelliteTracked[3]; + char NmeaHorizontalDilution[6]; + char NmeaAltitude[8]; + char NmeaAltitudeUnit[2]; + char NmeaHeightGeoid[8]; + char NmeaHeightGeoidUnit[2]; + char NmeaSpeed[8]; + char NmeaDetectionAngle[8]; + char NmeaDate[8]; +}tNmeaGpsData; + +extern tNmeaGpsData NmeaGpsData; + +/*! + * \brief Initializes the handling of the GPS receiver + */ +void GpsInit( void ); + +/*! + * \brief Switch ON the GPS + */ +void GpsStart( void ); + +/*! + * \brief Switch OFF the GPS + */ +void GpsStop( void ); + +/*! + * Updates the GPS status + */ +void GpsProcess( void ); + +/*! + * \brief PPS signal handling function + */ +void GpsPpsHandler( bool *parseData ); + +/*! + * \brief PPS signal handling function + * + * \retval ppsDetected State of PPS signal. + */ +bool GpsGetPpsDetectedState( void ); + +/*! + * \brief Indicates if GPS has fix + * + * \retval hasFix + */ +bool GpsHasFix( void ); + +/*! + * \brief Converts the latest Position (latitude and longitude) into a binary + * number + */ +void GpsConvertPositionIntoBinary( void ); + +/*! + * \brief Converts the latest Position (latitude and Longitude) from ASCII into + * DMS numerical format + */ +void GpsConvertPositionFromStringToNumerical( void ); + +/*! + * \brief Gets the latest Position (latitude and Longitude) as two double values + * if available + * + * \param [OUT] lati Latitude value + * \param [OUT] longi Longitude value + * + * \retval status [SUCCESS, FAIL] + */ +uint8_t GpsGetLatestGpsPositionDouble ( double *lati, double *longi ); + +/*! + * \brief Gets the latest Position (latitude and Longitude) as two binary values + * if available + * + * \param [OUT] latiBin Latitude value + * \param [OUT] longiBin Longitude value + * + * \retval status [SUCCESS, FAIL] + */ +uint8_t GpsGetLatestGpsPositionBinary ( int32_t *latiBin, int32_t *longiBin ); + +/*! + * \brief Parses the NMEA sentence. + * + * \remark Only parses GPGGA and GPRMC sentences + * + * \param [IN] rxBuffer Data buffer to be parsed + * \param [IN] rxBufferSize Size of data buffer + * + * \retval status [SUCCESS, FAIL] + */ +uint8_t GpsParseGpsData( int8_t *rxBuffer, int32_t rxBufferSize ); + +/*! + * \brief Returns the latest altitude from the parsed NMEA sentence + * + * \retval altitude + */ +int16_t GpsGetLatestGpsAltitude( void ); + +/*! + * \brief Format GPS data into numeric and binary formats + */ +void GpsFormatGpsData( void ); + +/*! + * \brief Resets the GPS position variables + */ +void GpsResetPosition( void ); + +#endif // __GPS_H__ diff --git a/lib/system_utils/i2c.h b/lib/system_utils/i2c.h new file mode 100755 index 0000000..5d0f879 --- /dev/null +++ b/lib/system_utils/i2c.h @@ -0,0 +1,93 @@ +/* + / _____) _ | | +( (____ _____ ____ _| |_ _____ ____| |__ + \____ \| ___ | (_ _) ___ |/ ___) _ \ + _____) ) ____| | | || |_| ____( (___| | | | +(______/|_____)_|_|_| \__)_____)\____)_| |_| + (C)2013 Semtech + +Description: Implements the generic I2C driver + +License: Revised BSD License, see LICENSE.TXT file include in the project + +Maintainer: Miguel Luis and Gregory Cristian +*/ +#ifndef __I2C_H__ +#define __I2C_H__ + +/*! + * I2C object type definition + */ +typedef struct +{ + I2C_HandleTypeDef I2c; + Gpio_t Scl; + Gpio_t Sda; +}I2c_t; + +/*! + * \brief Initializes the I2C object and MCU peripheral + * + * \param [IN] obj I2C object + * \param [IN] scl I2C Scl pin name to be used + * \param [IN] sda I2C Sda pin name to be used + */ +void I2cInit( I2c_t *obj, PinNames scl, PinNames sda ); + +/*! + * \brief DeInitializes the I2C object and MCU peripheral + * + * \param [IN] obj I2C object + */ +void I2cDeInit( I2c_t *obj ); + +/*! + * \brief Reset the I2C object and MCU peripheral + * + * \param [IN] obj I2C object + */ +void I2cResetBus( I2c_t *obj ); + +/*! + * \brief Write data to the I2C device + * + * \param [IN] obj I2C object + * \param [IN] deviceAddr device address + * \param [IN] addr data address + * \param [IN] data data to write + */ +uint8_t I2cWrite( I2c_t *obj, uint8_t deviceAddr, uint16_t addr, uint8_t data ); + +/*! + * \brief Write several data to the I2C device + * + * \param [IN] obj I2C object + * \param [IN] deviceAddr device address + * \param [IN] addr data address + * \param [IN] buffer data buffer to write + * \param [IN] size number of bytes to write + */ +uint8_t I2cWriteBuffer( I2c_t *obj, uint8_t deviceAddr, uint16_t addr, uint8_t *buffer, uint16_t size ); + +/*! + * \brief Read data from the I2C device + * + * \param [IN] obj I2C object + * \param [IN] deviceAddr device address + * \param [IN] addr data address + * \param [OUT] data variable used to store the data read + */ +uint8_t I2cRead( I2c_t *obj, uint8_t deviceAddr, uint16_t addr, uint8_t *data ); + +/*! + * \brief Read several data byte from the I2C device + * + * \param [IN] obj I2C object + * \param [IN] deviceAddr device address + * \param [IN] addr data address + * \param [OUT] buffer data buffer used to store the data read + * \param [IN] size number of data byte to read + */ +uint8_t I2cReadBuffer( I2c_t *obj, uint8_t deviceAddr, uint16_t addr, uint8_t *buffer, uint16_t size ); + +#endif // __I2C_H__ diff --git a/lib/system_utils/serial.h b/lib/system_utils/serial.h new file mode 100755 index 0000000..c05c152 --- /dev/null +++ b/lib/system_utils/serial.h @@ -0,0 +1,18 @@ +/* + / _____) _ | | +( (____ _____ ____ _| |_ _____ ____| |__ + \____ \| ___ | (_ _) ___ |/ ___) _ \ + _____) ) ____| | | || |_| ____( (___| | | | +(______/|_____)_|_|_| \__)_____)\____)_| |_| + (C)2013 Semtech + +Description: Implements the generic UART driver + +License: Revised BSD License, see LICENSE.TXT file include in the project + +Maintainer: Miguel Luis and Gregory Cristian +*/ +#ifndef __SERIAL_H__ +#define __SERIAL_H__ + +#endif // __SERIAL_H__ diff --git a/lib/system_utils/spi.h b/lib/system_utils/spi.h new file mode 100755 index 0000000..502f6e8 --- /dev/null +++ b/lib/system_utils/spi.h @@ -0,0 +1,76 @@ +/* + / _____) _ | | +( (____ _____ ____ _| |_ _____ ____| |__ + \____ \| ___ | (_ _) ___ |/ ___) _ \ + _____) ) ____| | | || |_| ____( (___| | | | +(______/|_____)_|_|_| \__)_____)\____)_| |_| + (C)2013 Semtech + +Description: Implements the generic SPI driver + +License: Revised BSD License, see LICENSE.TXT file include in the project + +Maintainer: Miguel Luis and Gregory Cristian +*/ +#ifndef __SPI_H__ +#define __SPI_H__ + +#include "spi-board.h" + +/*! + * SPI object type definition + */ +typedef struct Spi_s Spi_t; + +/*! + * \brief Initializes the SPI object and MCU peripheral + * + * \remark When NSS pin is software controlled set the pin name to NC otherwise + * set the pin name to be used. + * + * \param [IN] obj SPI object + * \param [IN] mosi SPI MOSI pin name to be used + * \param [IN] miso SPI MISO pin name to be used + * \param [IN] sclk SPI SCLK pin name to be used + * \param [IN] nss SPI NSS pin name to be used + */ +void SpiInit( Spi_t *obj, PinNames mosi, PinNames miso, PinNames sclk, PinNames nss ); + +/*! + * \brief De-initializes the SPI object and MCU peripheral + * + * \param [IN] obj SPI object + */ +void SpiDeInit( Spi_t *obj ); + +/*! + * \brief Configures the SPI peripheral + * + * \remark Slave mode isn't currently handled + * + * \param [IN] obj SPI object + * \param [IN] bits Number of bits to be used. [8 or 16] + * \param [IN] cpol Clock polarity + * \param [IN] cpha Clock phase + * \param [IN] slave When set the peripheral acts in slave mode + */ +void SpiFormat( Spi_t *obj, int8_t bits, int8_t cpol, int8_t cpha, int8_t slave ); + +/*! + * \brief Sets the SPI speed + * + * \param [IN] obj SPI object + * \param [IN] hz SPI clock frequency in hz + */ +void SpiFrequency( Spi_t *obj, uint32_t hz ); + +/*! + * \brief Sends outData and receives inData + * + * \param [IN] obj SPI object + * \param [IN] outData Byte to be sent + * \retval inData Received byte. + */ +uint16_t SpiInOut( Spi_t *obj, uint16_t outData ); + +#endif // __SPI_H__ diff --git a/lib/system_utils/src/adc.c b/lib/system_utils/src/adc.c new file mode 100755 index 0000000..1eaee55 --- /dev/null +++ b/lib/system_utils/src/adc.c @@ -0,0 +1,49 @@ +/* + / _____) _ | | +( (____ _____ ____ _| |_ _____ ____| |__ + \____ \| ___ | (_ _) ___ |/ ___) _ \ + _____) ) ____| | | || |_| ____( (___| | | | +(______/|_____)_|_|_| \__)_____)\____)_| |_| + (C)2013 Semtech + +Description: Implements a generic ADC driver + +License: Revised BSD License, see LICENSE.TXT file include in the project + +Maintainer: Miguel Luis and Gregory Cristian +*/ +#include "board.h" +#include "adc-board.h" + +/*! + * Flag to indicates if the ADC is initialized + */ +static bool AdcInitialized = false; + +void AdcInit( Adc_t *obj, PinNames adcInput ) +{ + if( AdcInitialized == false ) + { + AdcInitialized = true; + + AdcMcuInit( obj, adcInput ); + AdcMcuConfig( ); + } +} + +void AdcDeInit( Adc_t *obj ) +{ + AdcInitialized = false; +} + +uint16_t AdcReadChannel( Adc_t *obj, uint32_t channel ) +{ + if( AdcInitialized == true ) + { + return AdcMcuReadChannel( obj, channel ); + } + else + { + return 0; + } +} diff --git a/lib/system_utils/src/delay.c b/lib/system_utils/src/delay.c new file mode 100755 index 0000000..72c6247 --- /dev/null +++ b/lib/system_utils/src/delay.c @@ -0,0 +1,25 @@ +/* + / _____) _ | | +( (____ _____ ____ _| |_ _____ ____| |__ + \____ \| ___ | (_ _) ___ |/ ___) _ \ + _____) ) ____| | | || |_| ____( (___| | | | +(______/|_____)_|_|_| \__)_____)\____)_| |_| + (C)2013 Semtech + +Description: Delay functions implementation + +License: Revised BSD License, see LICENSE.TXT file include in the project + +Maintainer: Miguel Luis and Gregory Cristian +*/ +#include "board.h" + +void Delay( float s ) +{ + DelayMs( s * 1000.0f ); +} + +void DelayMs( uint32_t ms ) +{ + HAL_Delay( ms ); +} diff --git a/lib/system_utils/src/eeprom.c b/lib/system_utils/src/eeprom.c new file mode 100755 index 0000000..99e5bd7 --- /dev/null +++ b/lib/system_utils/src/eeprom.c @@ -0,0 +1,37 @@ +/* + / _____) _ | | +( (____ _____ ____ _| |_ _____ ____| |__ + \____ \| ___ | (_ _) ___ |/ ___) _ \ + _____) ) ____| | | || |_| ____( (___| | | | +(______/|_____)_|_|_| \__)_____)\____)_| |_| + (C)2013 Semtech + +Description: Timer objects and scheduling management + +License: Revised BSD License, see LICENSE.TXT file include in the project + +Maintainer: Miguel Luis and Gregory Cristian +*/ +#include "board.h" + +#include "eeprom-board.h" + +uint8_t EepromWriteBuffer( uint16_t addr, uint8_t *buffer, uint16_t size ) +{ + return EepromMcuWriteBuffer( addr, buffer, size ); +} + +uint8_t EepromReadBuffer( uint16_t addr, uint8_t *buffer, uint16_t size ) +{ + return EepromMcuReadBuffer( addr, buffer, size ); +} + +void EepromSetDeviceAddr( uint8_t addr ) +{ + EepromMcuSetDeviceAddr( addr ); +} + +uint8_t EepromGetDeviceAddr( void ) +{ + return EepromMcuGetDeviceAddr( ); +} diff --git a/lib/system_utils/src/fifo.c b/lib/system_utils/src/fifo.c new file mode 100755 index 0000000..b32c817 --- /dev/null +++ b/lib/system_utils/src/fifo.c @@ -0,0 +1,58 @@ +/* + / _____) _ | | +( (____ _____ ____ _| |_ _____ ____| |__ + \____ \| ___ | (_ _) ___ |/ ___) _ \ + _____) ) ____| | | || |_| ____( (___| | | | +(______/|_____)_|_|_| \__)_____)\____)_| |_| + (C)2013 Semtech + +Description: Implements a FIFO buffer + +License: Revised BSD License, see LICENSE.TXT file include in the project + +Maintainer: Miguel Luis and Gregory Cristian +*/ +#include "fifo.h" + +static uint16_t FifoNext( Fifo_t *fifo, uint16_t index ) +{ + return ( index + 1 ) % fifo->Size; +} + +void FifoInit( Fifo_t *fifo, uint8_t *buffer, uint16_t size ) +{ + fifo->Begin = 0; + fifo->End = 0; + fifo->Data = buffer; + fifo->Size = size; +} + +void FifoPush( Fifo_t *fifo, uint8_t data ) +{ + fifo->End = FifoNext( fifo, fifo->End ); + fifo->Data[fifo->End] = data; +} + +uint8_t FifoPop( Fifo_t *fifo ) +{ + uint8_t data = fifo->Data[FifoNext( fifo, fifo->Begin )]; + + fifo->Begin = FifoNext( fifo, fifo->Begin ); + return data; +} + +void FifoFlush( Fifo_t *fifo ) +{ + fifo->Begin = 0; + fifo->End = 0; +} + +bool IsFifoEmpty( Fifo_t *fifo ) +{ + return ( fifo->Begin == fifo->End ); +} + +bool IsFifoFull( Fifo_t *fifo ) +{ + return ( FifoNext( fifo, fifo->End ) == fifo->Begin ); +} diff --git a/lib/system_utils/src/gpio.c b/lib/system_utils/src/gpio.c new file mode 100755 index 0000000..0592805 --- /dev/null +++ b/lib/system_utils/src/gpio.c @@ -0,0 +1,117 @@ +/* + / _____) _ | | +( (____ _____ ____ _| |_ _____ ____| |__ + \____ \| ___ | (_ _) ___ |/ ___) _ \ + _____) ) ____| | | || |_| ____( (___| | | | +(______/|_____)_|_|_| \__)_____)\____)_| |_| + (C)2013 Semtech + +Description: Generic GPIO driver implementation + +Comment: Relies on the specific board GPIO implementation as well as on + IO expander driver implementation if one is available on the target + board. + +License: Revised BSD License, see LICENSE.TXT file include in the project + +Maintainer: Miguel Luis and Gregory Cristian +*/ +#include "board.h" + +#include "gpio-board.h" + +#if defined( BOARD_IOE_EXT ) +#include "gpio-ioe.h" +#endif + +void GpioInit( Gpio_t *obj, PinNames pin, PinModes mode, PinConfigs config, PinTypes type, uint32_t value ) +{ + if( ( uint32_t )( pin >> 4 ) <= 6 ) + { + GpioMcuInit( obj, pin, mode, config, type, value ); + } + else + { +#if defined( BOARD_IOE_EXT ) + // IOExt Pin + GpioIoeInit( obj, pin, mode, config, type, value ); +#endif + } +} + +void GpioSetInterrupt( Gpio_t *obj, IrqModes irqMode, IrqPriorities irqPriority, GpioIrqHandler *irqHandler ) +{ + if( ( uint32_t )( obj->pin >> 4 ) <= 6 ) + { + GpioMcuSetInterrupt( obj, irqMode, irqPriority, irqHandler ); + } + else + { +#if defined( BOARD_IOE_EXT ) + // IOExt Pin + GpioIoeSetInterrupt( obj, irqMode, irqPriority, irqHandler ); +#endif + } +} + +void GpioRemoveInterrupt( Gpio_t *obj ) +{ + if( ( uint32_t )( obj->pin >> 4 ) <= 6 ) + { + //GpioMcuRemoveInterrupt( obj ); + } + else + { +#if defined( BOARD_IOE_EXT ) + // IOExt Pin + //GpioIoeRemoveInterrupt( obj ); +#endif + } +} + +void GpioWrite( Gpio_t *obj, uint32_t value ) +{ + if( ( uint32_t )( obj->pin >> 4 ) <= 6 ) + { + GpioMcuWrite( obj, value ); + } + else + { +#if defined( BOARD_IOE_EXT ) + // IOExt Pin + GpioIoeWrite( obj, value ); +#endif + } +} + +void GpioToggle( Gpio_t *obj ) +{ + if( ( uint32_t )( obj->pin >> 4 ) <= 6 ) + { + GpioMcuToggle( obj ); + } + else + { +#if defined( BOARD_IOE_EXT ) + // IOExt Pin + GpioIoeWrite( obj, GpioIoeRead( obj ) ^ 1 ); +#endif + } +} + +uint32_t GpioRead( Gpio_t *obj ) +{ + if( ( uint32_t )( obj->pin >> 4 ) <= 6 ) + { + return GpioMcuRead( obj ); + } + else + { +#if defined( BOARD_IOE_EXT ) + // IOExt Pin + return GpioIoeRead( obj ); +#else + return 0; +#endif + } +} diff --git a/lib/system_utils/src/gps.c b/lib/system_utils/src/gps.c new file mode 100755 index 0000000..eb82c2f --- /dev/null +++ b/lib/system_utils/src/gps.c @@ -0,0 +1,648 @@ +/* + / _____) _ | | +( (____ _____ ____ _| |_ _____ ____| |__ + \____ \| ___ | (_ _) ___ |/ ___) _ \ + _____) ) ____| | | || |_| ____( (___| | | | +(______/|_____)_|_|_| \__)_____)\____)_| |_| + (C)2013 Semtech + +Description: Generic driver for any GPS receiver + +License: Revised BSD License, see LICENSE.TXT file include in the project + +Maintainer: Miguel Luis and Gregory Cristian +*/ +#include +#include +#include +#include +#include +#include "board.h" +#include "gps.h" + +#define TRIGGER_GPS_CNT 10 + +/* Various type of NMEA data we can receive with the Gps */ +const char NmeaDataTypeGPGGA[] = "GPGGA"; +const char NmeaDataTypeGPGSA[] = "GPGSA"; +const char NmeaDataTypeGPGSV[] = "GPGSV"; +const char NmeaDataTypeGPRMC[] = "GPRMC"; + +/* Value used for the conversion of the position from DMS to decimal */ +const int32_t MaxNorthPosition = 8388607; // 2^23 - 1 +const int32_t MaxSouthPosition = 8388608; // -2^23 +const int32_t MaxEastPosition = 8388607; // 2^23 - 1 +const int32_t MaxWestPosition = 8388608; // -2^23 + +tNmeaGpsData NmeaGpsData; + +static double HasFix = false; +static double Latitude = 0; +static double Longitude = 0; + +static int32_t LatitudeBinary = 0; +static int32_t LongitudeBinary = 0; + +static int16_t Altitude = 0xFFFF; + +static uint32_t PpsCnt = 0; + +bool PpsDetected = false; + +void GpsPpsHandler( bool *parseData ) +{ + PpsDetected = true; + PpsCnt++; + *parseData = false; + + if( PpsCnt >= TRIGGER_GPS_CNT ) + { + PpsCnt = 0; + BlockLowPowerDuringTask ( true ); + *parseData = true; + } +} + +void GpsInit( void ) +{ + PpsDetected = false; + GpsMcuInit( ); +} + +void GpsStart( void ) +{ + GpsMcuStart( ); +} + +void GpsStop( void ) +{ + GpsMcuStop( ); +} + +void GpsProcess( void ) +{ + GpsMcuProcess( ); +} + +bool GpsGetPpsDetectedState( void ) +{ + bool state = false; + + BoardDisableIrq( ); + state = PpsDetected; + PpsDetected = false; + BoardEnableIrq( ); + return state; +} + +bool GpsHasFix( void ) +{ + return HasFix; +} + +void GpsConvertPositionIntoBinary( void ) +{ + long double temp; + + if( Latitude >= 0 ) // North + { + temp = Latitude * MaxNorthPosition; + LatitudeBinary = temp / 90; + } + else // South + { + temp = Latitude * MaxSouthPosition; + LatitudeBinary = temp / 90; + } + + if( Longitude >= 0 ) // East + { + temp = Longitude * MaxEastPosition; + LongitudeBinary = temp / 180; + } + else // West + { + temp = Longitude * MaxWestPosition; + LongitudeBinary = temp / 180; + } +} + +void GpsConvertPositionFromStringToNumerical( void ) +{ + int i; + + double valueTmp1; + double valueTmp2; + double valueTmp3; + double valueTmp4; + + // Convert the latitude from ASCII to uint8_t values + for( i = 0 ; i < 10 ; i++ ) + { + NmeaGpsData.NmeaLatitude[i] = NmeaGpsData.NmeaLatitude[i] & 0xF; + } + // Convert latitude from degree/minute/second (DMS) format into decimal + valueTmp1 = ( double )NmeaGpsData.NmeaLatitude[0] * 10.0 + ( double )NmeaGpsData.NmeaLatitude[1]; + valueTmp2 = ( double )NmeaGpsData.NmeaLatitude[2] * 10.0 + ( double )NmeaGpsData.NmeaLatitude[3]; + valueTmp3 = ( double )NmeaGpsData.NmeaLatitude[5] * 1000.0 + ( double )NmeaGpsData.NmeaLatitude[6] * 100.0 + + ( double )NmeaGpsData.NmeaLatitude[7] * 10.0 + ( double )NmeaGpsData.NmeaLatitude[8]; + + Latitude = valueTmp1 + ( ( valueTmp2 + ( valueTmp3 * 0.0001 ) ) / 60.0 ); + + if( NmeaGpsData.NmeaLatitudePole[0] == 'S' ) + { + Latitude *= -1; + } + + // Convert the longitude from ASCII to uint8_t values + for( i = 0 ; i < 10 ; i++ ) + { + NmeaGpsData.NmeaLongitude[i] = NmeaGpsData.NmeaLongitude[i] & 0xF; + } + // Convert longitude from degree/minute/second (DMS) format into decimal + valueTmp1 = ( double )NmeaGpsData.NmeaLongitude[0] * 100.0 + ( double )NmeaGpsData.NmeaLongitude[1] * 10.0 + ( double )NmeaGpsData.NmeaLongitude[2]; + valueTmp2 = ( double )NmeaGpsData.NmeaLongitude[3] * 10.0 + ( double )NmeaGpsData.NmeaLongitude[4]; + valueTmp3 = ( double )NmeaGpsData.NmeaLongitude[6] * 1000.0 + ( double )NmeaGpsData.NmeaLongitude[7] * 100; + valueTmp4 = ( double )NmeaGpsData.NmeaLongitude[8] * 10.0 + ( double )NmeaGpsData.NmeaLongitude[9]; + + Longitude = valueTmp1 + ( valueTmp2 / 60.0 ) + ( ( ( valueTmp3 + valueTmp4 ) * 0.0001 ) / 60.0 ); + + if( NmeaGpsData.NmeaLongitudePole[0] == 'W' ) + { + Longitude *= -1; + } +} + + +uint8_t GpsGetLatestGpsPositionDouble( double *lati, double *longi ) +{ + uint8_t status = FAIL; + if( HasFix == true ) + { + status = SUCCESS; + } + else + { + GpsResetPosition( ); + } + *lati = Latitude; + *longi = Longitude; + return status; +} + +uint8_t GpsGetLatestGpsPositionBinary( int32_t *latiBin, int32_t *longiBin ) +{ + uint8_t status = FAIL; + + BoardDisableIrq( ); + if( HasFix == true ) + { + status = SUCCESS; + } + else + { + GpsResetPosition( ); + } + *latiBin = LatitudeBinary; + *longiBin = LongitudeBinary; + BoardEnableIrq( ); + return status; +} + +int16_t GpsGetLatestGpsAltitude( void ) +{ + BoardDisableIrq( ); + if( HasFix == true ) + { + Altitude = atoi( NmeaGpsData.NmeaAltitude ); + } + else + { + Altitude = 0xFFFF; + } + BoardEnableIrq( ); + + return Altitude; +} + +/*! + * Calculates the checksum for a NMEA sentence + * + * Skip the first '$' if necessary and calculate checksum until '*' character is + * reached (or buffSize exceeded). + * + * \retval chkPosIdx Position of the checksum in the sentence + */ +int32_t GpsNmeaChecksum( int8_t *nmeaStr, int32_t nmeaStrSize, int8_t * checksum ) +{ + int i = 0; + uint8_t checkNum = 0; + + // Check input parameters + if( ( nmeaStr == NULL ) || ( checksum == NULL ) || ( nmeaStrSize <= 1 ) ) + { + return -1; + } + + // Skip the first '$' if necessary + if( nmeaStr[i] == '$' ) + { + i += 1; + } + + // XOR until '*' or max length is reached + while( nmeaStr[i] != '*' ) + { + checkNum ^= nmeaStr[i]; + i += 1; + if( i >= nmeaStrSize ) + { + return -1; + } + } + + // Convert checksum value to 2 hexadecimal characters + checksum[0] = Nibble2HexChar( checkNum / 16 ); // upper nibble + checksum[1] = Nibble2HexChar( checkNum % 16 ); // lower nibble + + return i + 1; +} + +/*! + * Calculate the checksum of a NMEA frame and compare it to the checksum that is + * present at the end of it. + * Return true if it matches + */ +static bool GpsNmeaValidateChecksum( int8_t *serialBuff, int32_t buffSize ) +{ + int32_t checksumIndex; + int8_t checksum[2]; // 2 characters to calculate NMEA checksum + + checksumIndex = GpsNmeaChecksum( serialBuff, buffSize, checksum ); + + // could we calculate a verification checksum ? + if( checksumIndex < 0 ) + { + return false; + } + + // check if there are enough char in the serial buffer to read checksum + if( checksumIndex >= ( buffSize - 2 ) ) + { + return false; + } + + // check the checksum + if( ( serialBuff[checksumIndex] == checksum[0] ) && ( serialBuff[checksumIndex + 1] == checksum[1] ) ) + { + return true; + } + else + { + return false; + } +} + +uint8_t GpsParseGpsData( int8_t *rxBuffer, int32_t rxBufferSize ) +{ + uint8_t i = 1; + uint8_t j = 0; + uint8_t fieldSize = 0; + + if( rxBuffer[0] != '$' ) + { + GpsMcuInvertPpsTrigger( ); + return FAIL; + } + + if( GpsNmeaValidateChecksum( rxBuffer, rxBufferSize ) == false ) + { + return FAIL; + } + + fieldSize = 0; + while( rxBuffer[i + fieldSize++] != ',' ) + { + if( fieldSize > 6 ) + { + return FAIL; + } + } + for( j = 0; j < fieldSize; j++, i++ ) + { + NmeaGpsData.NmeaDataType[j] = rxBuffer[i]; + } + // Parse the GPGGA data + if( strncmp( ( const char* )NmeaGpsData.NmeaDataType, ( const char* )NmeaDataTypeGPGGA, 5 ) == 0 ) + { + // NmeaUtcTime + fieldSize = 0; + while( rxBuffer[i + fieldSize++] != ',' ) + { + if( fieldSize > 11 ) + { + return FAIL; + } + } + for( j = 0; j < fieldSize; j++, i++ ) + { + NmeaGpsData.NmeaUtcTime[j] = rxBuffer[i]; + } + // NmeaLatitude + fieldSize = 0; + while( rxBuffer[i + fieldSize++] != ',' ) + { + if( fieldSize > 10 ) + { + return FAIL; + } + } + for( j = 0; j < fieldSize; j++, i++ ) + { + NmeaGpsData.NmeaLatitude[j] = rxBuffer[i]; + } + // NmeaLatitudePole + fieldSize = 0; + while( rxBuffer[i + fieldSize++] != ',' ) + { + if( fieldSize > 2 ) + { + return FAIL; + } + } + for( j = 0; j < fieldSize; j++, i++ ) + { + NmeaGpsData.NmeaLatitudePole[j] = rxBuffer[i]; + } + // NmeaLongitude + fieldSize = 0; + while( rxBuffer[i + fieldSize++] != ',' ) + { + if( fieldSize > 11 ) + { + return FAIL; + } + } + for( j = 0; j < fieldSize; j++, i++ ) + { + NmeaGpsData.NmeaLongitude[j] = rxBuffer[i]; + } + // NmeaLongitudePole + fieldSize = 0; + while( rxBuffer[i + fieldSize++] != ',' ) + { + if( fieldSize > 2 ) + { + return FAIL; + } + } + for( j = 0; j < fieldSize; j++, i++ ) + { + NmeaGpsData.NmeaLongitudePole[j] = rxBuffer[i]; + } + // NmeaFixQuality + fieldSize = 0; + while( rxBuffer[i + fieldSize++] != ',' ) + { + if( fieldSize > 2 ) + { + return FAIL; + } + } + for( j = 0; j < fieldSize; j++, i++ ) + { + NmeaGpsData.NmeaFixQuality[j] = rxBuffer[i]; + } + // NmeaSatelliteTracked + fieldSize = 0; + while( rxBuffer[i + fieldSize++] != ',' ) + { + if( fieldSize > 3 ) + { + return FAIL; + } + } + for( j = 0; j < fieldSize; j++, i++ ) + { + NmeaGpsData.NmeaSatelliteTracked[j] = rxBuffer[i]; + } + // NmeaHorizontalDilution + fieldSize = 0; + while( rxBuffer[i + fieldSize++] != ',' ) + { + if( fieldSize > 6 ) + { + return FAIL; + } + } + for( j = 0; j < fieldSize; j++, i++ ) + { + NmeaGpsData.NmeaHorizontalDilution[j] = rxBuffer[i]; + } + // NmeaAltitude + fieldSize = 0; + while( rxBuffer[i + fieldSize++] != ',' ) + { + if( fieldSize > 8 ) + { + return FAIL; + } + } + for( j = 0; j < fieldSize; j++, i++ ) + { + NmeaGpsData.NmeaAltitude[j] = rxBuffer[i]; + } + // NmeaAltitudeUnit + fieldSize = 0; + while( rxBuffer[i + fieldSize++] != ',' ) + { + if( fieldSize > 2 ) + { + return FAIL; + } + } + for( j = 0; j < fieldSize; j++, i++ ) + { + NmeaGpsData.NmeaAltitudeUnit[j] = rxBuffer[i]; + } + // NmeaHeightGeoid + fieldSize = 0; + while( rxBuffer[i + fieldSize++] != ',' ) + { + if( fieldSize > 8 ) + { + return FAIL; + } + } + for( j = 0; j < fieldSize; j++, i++ ) + { + NmeaGpsData.NmeaHeightGeoid[j] = rxBuffer[i]; + } + // NmeaHeightGeoidUnit + fieldSize = 0; + while( rxBuffer[i + fieldSize++] != ',' ) + { + if( fieldSize > 2 ) + { + return FAIL; + } + } + for( j = 0; j < fieldSize; j++, i++ ) + { + NmeaGpsData.NmeaHeightGeoidUnit[j] = rxBuffer[i]; + } + + GpsFormatGpsData( ); + return SUCCESS; + } + else if ( strncmp( ( const char* )NmeaGpsData.NmeaDataType, ( const char* )NmeaDataTypeGPRMC, 5 ) == 0 ) + { + // NmeaUtcTime + fieldSize = 0; + while( rxBuffer[i + fieldSize++] != ',' ) + { + if( fieldSize > 11 ) + { + return FAIL; + } + } + for( j = 0; j < fieldSize; j++, i++ ) + { + NmeaGpsData.NmeaUtcTime[j] = rxBuffer[i]; + } + // NmeaDataStatus + fieldSize = 0; + while( rxBuffer[i + fieldSize++] != ',' ) + { + if( fieldSize > 2 ) + { + return FAIL; + } + } + for( j = 0; j < fieldSize; j++, i++ ) + { + NmeaGpsData.NmeaDataStatus[j] = rxBuffer[i]; + } + // NmeaLatitude + fieldSize = 0; + while( rxBuffer[i + fieldSize++] != ',' ) + { + if( fieldSize > 10 ) + { + return FAIL; + } + } + for( j = 0; j < fieldSize; j++, i++ ) + { + NmeaGpsData.NmeaLatitude[j] = rxBuffer[i]; + } + // NmeaLatitudePole + fieldSize = 0; + while( rxBuffer[i + fieldSize++] != ',' ) + { + if( fieldSize > 2 ) + { + return FAIL; + } + } + for( j = 0; j < fieldSize; j++, i++ ) + { + NmeaGpsData.NmeaLatitudePole[j] = rxBuffer[i]; + } + // NmeaLongitude + fieldSize = 0; + while( rxBuffer[i + fieldSize++] != ',' ) + { + if( fieldSize > 11 ) + { + return FAIL; + } + } + for( j = 0; j < fieldSize; j++, i++ ) + { + NmeaGpsData.NmeaLongitude[j] = rxBuffer[i]; + } + // NmeaLongitudePole + fieldSize = 0; + while( rxBuffer[i + fieldSize++] != ',' ) + { + if( fieldSize > 2 ) + { + return FAIL; + } + } + for( j = 0; j < fieldSize; j++, i++ ) + { + NmeaGpsData.NmeaLongitudePole[j] = rxBuffer[i]; + } + // NmeaSpeed + fieldSize = 0; + while( rxBuffer[i + fieldSize++] != ',' ) + { + if( fieldSize > 8 ) + { + return FAIL; + } + } + for( j = 0; j < fieldSize; j++, i++ ) + { + NmeaGpsData.NmeaSpeed[j] = rxBuffer[i]; + } + // NmeaDetectionAngle + fieldSize = 0; + while( rxBuffer[i + fieldSize++] != ',' ) + { + if( fieldSize > 8 ) + { + return FAIL; + } + } + for( j = 0; j < fieldSize; j++, i++ ) + { + NmeaGpsData.NmeaDetectionAngle[j] = rxBuffer[i]; + } + // NmeaDate + fieldSize = 0; + while( rxBuffer[i + fieldSize++] != ',' ) + { + if( fieldSize > 8 ) + { + return FAIL; + } + } + for( j = 0; j < fieldSize; j++, i++ ) + { + NmeaGpsData.NmeaDate[j] = rxBuffer[i]; + } + + GpsFormatGpsData( ); + return SUCCESS; + } + else + { + return FAIL; + } +} + +void GpsFormatGpsData( void ) +{ + if( strncmp( ( const char* )NmeaGpsData.NmeaDataType, ( const char* )NmeaDataTypeGPGGA, 5 ) == 0 ) + { + HasFix = ( NmeaGpsData.NmeaFixQuality[0] > 0x30 ) ? true : false; + } + else if ( strncmp( ( const char* )NmeaGpsData.NmeaDataType, ( const char* )NmeaDataTypeGPRMC, 5 ) == 0 ) + { + HasFix = ( NmeaGpsData.NmeaDataStatus[0] == 0x41 ) ? true : false; + } + GpsConvertPositionFromStringToNumerical( ); + GpsConvertPositionIntoBinary( ); +} + +void GpsResetPosition( void ) +{ + Altitude = 0xFFFF; + Latitude = 0; + Longitude = 0; + LatitudeBinary = 0; + LongitudeBinary = 0; +} diff --git a/lib/system_utils/src/i2c.c b/lib/system_utils/src/i2c.c new file mode 100755 index 0000000..3397e70 --- /dev/null +++ b/lib/system_utils/src/i2c.c @@ -0,0 +1,122 @@ +/* + / _____) _ | | +( (____ _____ ____ _| |_ _____ ____| |__ + \____ \| ___ | (_ _) ___ |/ ___) _ \ + _____) ) ____| | | || |_| ____( (___| | | | +(______/|_____)_|_|_| \__)_____)\____)_| |_| + (C)2013 Semtech + +Description: Implements the generic I2C driver + +License: Revised BSD License, see LICENSE.TXT file include in the project + +Maintainer: Miguel Luis and Gregory Cristian +*/ +#include "board.h" +#include "i2c-board.h" + +/*! + * Flag to indicates if the I2C is initialized + */ +static bool I2cInitialized = false; + +void I2cInit( I2c_t *obj, PinNames scl, PinNames sda ) +{ + if( I2cInitialized == false ) + { + I2cInitialized = true; + + I2cMcuInit( obj, scl, sda ); + I2cMcuFormat( obj, MODE_I2C, I2C_DUTY_CYCLE_2, true, I2C_ACK_ADD_7_BIT, 400000 ); + } +} + +void I2cDeInit( I2c_t *obj ) +{ + I2cInitialized = false; + I2cMcuDeInit( obj ); +} + +void I2cResetBus( I2c_t *obj ) +{ + I2cInitialized = false; + I2cInit( obj, I2C_SCL, I2C_SDA ); +} + +uint8_t I2cWrite( I2c_t *obj, uint8_t deviceAddr, uint16_t addr, uint8_t data ) +{ + if( I2cInitialized == true ) + { + if( I2cMcuWriteBuffer( obj, deviceAddr, addr, &data, 1 ) == FAIL ) + { + // if first attempt fails due to an IRQ, try a second time + if( I2cMcuWriteBuffer( obj, deviceAddr, addr, &data, 1 ) == FAIL ) + { + return FAIL; + } + else + { + return SUCCESS; + } + } + else + { + return SUCCESS; + } + } + else + { + return FAIL; + } +} + +uint8_t I2cWriteBuffer( I2c_t *obj, uint8_t deviceAddr, uint16_t addr, uint8_t *buffer, uint16_t size ) +{ + if( I2cInitialized == true ) + { + if( I2cMcuWriteBuffer( obj, deviceAddr, addr, buffer, size ) == FAIL ) + { + // if first attempt fails due to an IRQ, try a second time + if( I2cMcuWriteBuffer( obj, deviceAddr, addr, buffer, size ) == FAIL ) + { + return FAIL; + } + else + { + return SUCCESS; + } + } + else + { + return SUCCESS; + } + } + else + { + return FAIL; + } +} + +uint8_t I2cRead( I2c_t *obj, uint8_t deviceAddr, uint16_t addr, uint8_t *data ) +{ + if( I2cInitialized == true ) + { + return( I2cMcuReadBuffer( obj, deviceAddr, addr, data, 1 ) ); + } + else + { + return FAIL; + } +} + +uint8_t I2cReadBuffer( I2c_t *obj, uint8_t deviceAddr, uint16_t addr, uint8_t *buffer, uint16_t size ) +{ + if( I2cInitialized == true ) + { + return( I2cMcuReadBuffer( obj, deviceAddr, addr, buffer, size ) ); + } + else + { + return FAIL; + } +} diff --git a/lib/system_utils/src/timer.c b/lib/system_utils/src/timer.c new file mode 100755 index 0000000..f875e47 --- /dev/null +++ b/lib/system_utils/src/timer.c @@ -0,0 +1,405 @@ +/* + / _____) _ | | +( (____ _____ ____ _| |_ _____ ____| |__ + \____ \| ___ | (_ _) ___ |/ ___) _ \ + _____) ) ____| | | || |_| ____( (___| | | | +(______/|_____)_|_|_| \__)_____)\____)_| |_| + (C)2013 Semtech + +Description: Timer objects and scheduling management + +License: Revised BSD License, see LICENSE.TXT file include in the project + +Maintainer: Miguel Luis and Gregory Cristian +*/ +#include "board.h" +#include "rtc-board.h" + + +/*! + * This flag is used to loop through the main several times in order to be sure + * that all pending events have been processed. + */ +volatile uint8_t HasLoopedThroughMain = 0; + +/*! + * Timers list head pointer + */ +static TimerEvent_t *TimerListHead = NULL; + +/*! + * \brief Adds or replace the head timer of the list. + * + * \remark The list is automatically sorted. The list head always contains the + * next timer to expire. + * + * \param [IN] obj Timer object to be become the new head + * \param [IN] remainingTime Remaining time of the previous head to be replaced + */ +static void TimerInsertNewHeadTimer( TimerEvent_t *obj, uint32_t remainingTime ); + +/*! + * \brief Adds a timer to the list. + * + * \remark The list is automatically sorted. The list head always contains the + * next timer to expire. + * + * \param [IN] obj Timer object to be added to the list + * \param [IN] remainingTime Remaining time of the running head after which the object may be added + */ +static void TimerInsertTimer( TimerEvent_t *obj, uint32_t remainingTime ); + +/*! + * \brief Sets a timeout with the duration "timestamp" + * + * \param [IN] timestamp Delay duration + */ +static void TimerSetTimeout( TimerEvent_t *obj ); + +/*! + * \brief Check if the Object to be added is not already in the list + * + * \param [IN] timestamp Delay duration + * \retval true (the object is already in the list) or false + */ +static bool TimerExists( TimerEvent_t *obj ); + +/*! + * \brief Read the timer value of the currently running timer + * + * \retval value current timer value + */ +TimerTime_t TimerGetValue( void ); + +void TimerInit( TimerEvent_t *obj, void ( *callback )( void ) ) +{ + obj->Timestamp = 0; + obj->ReloadValue = 0; + obj->IsRunning = false; + obj->Callback = callback; + obj->Next = NULL; +} + +void TimerStart( TimerEvent_t *obj ) +{ + uint32_t elapsedTime = 0; + uint32_t remainingTime = 0; + + BoardDisableIrq( ); + + if( ( obj == NULL ) || ( TimerExists( obj ) == true ) ) + { + BoardEnableIrq( ); + return; + } + + obj->Timestamp = obj->ReloadValue; + obj->IsRunning = false; + + if( TimerListHead == NULL ) + { + TimerInsertNewHeadTimer( obj, obj->Timestamp ); + } + else + { + if( TimerListHead->IsRunning == true ) + { + elapsedTime = TimerGetValue( ); + if( elapsedTime > TimerListHead->Timestamp ) + { + elapsedTime = TimerListHead->Timestamp; // security but should never occur + } + remainingTime = TimerListHead->Timestamp - elapsedTime; + } + else + { + remainingTime = TimerListHead->Timestamp; + } + + if( obj->Timestamp < remainingTime ) + { + TimerInsertNewHeadTimer( obj, remainingTime ); + } + else + { + TimerInsertTimer( obj, remainingTime ); + } + } + BoardEnableIrq( ); +} + +static void TimerInsertTimer( TimerEvent_t *obj, uint32_t remainingTime ) +{ + uint32_t aggregatedTimestamp = 0; // hold the sum of timestamps + uint32_t aggregatedTimestampNext = 0; // hold the sum of timestamps up to the next event + + TimerEvent_t* prev = TimerListHead; + TimerEvent_t* cur = TimerListHead->Next; + + if( cur == NULL ) + { // obj comes just after the head + obj->Timestamp -= remainingTime; + prev->Next = obj; + obj->Next = NULL; + } + else + { + aggregatedTimestamp = remainingTime; + aggregatedTimestampNext = remainingTime + cur->Timestamp; + + while( prev != NULL ) + { + if( aggregatedTimestampNext > obj->Timestamp ) + { + obj->Timestamp -= aggregatedTimestamp; + if( cur != NULL ) + { + cur->Timestamp -= obj->Timestamp; + } + prev->Next = obj; + obj->Next = cur; + break; + } + else + { + prev = cur; + cur = cur->Next; + if( cur == NULL ) + { // obj comes at the end of the list + aggregatedTimestamp = aggregatedTimestampNext; + obj->Timestamp -= aggregatedTimestamp; + prev->Next = obj; + obj->Next = NULL; + break; + } + else + { + aggregatedTimestamp = aggregatedTimestampNext; + aggregatedTimestampNext = aggregatedTimestampNext + cur->Timestamp; + } + } + } + } +} + +static void TimerInsertNewHeadTimer( TimerEvent_t *obj, uint32_t remainingTime ) +{ + TimerEvent_t* cur = TimerListHead; + + if( cur != NULL ) + { + cur->Timestamp = remainingTime - obj->Timestamp; + cur->IsRunning = false; + } + + obj->Next = cur; + obj->IsRunning = true; + TimerListHead = obj; + TimerSetTimeout( TimerListHead ); +} + +void TimerIrqHandler( void ) +{ + uint32_t elapsedTime = 0; + + // Early out when TimerListHead is null to prevent null pointer + if ( TimerListHead == NULL ) + { + return; + } + + elapsedTime = TimerGetValue( ); + + if( elapsedTime >= TimerListHead->Timestamp ) + { + TimerListHead->Timestamp = 0; + } + else + { + TimerListHead->Timestamp -= elapsedTime; + } + + TimerListHead->IsRunning = false; + + while( ( TimerListHead != NULL ) && ( TimerListHead->Timestamp == 0 ) ) + { + TimerEvent_t* elapsedTimer = TimerListHead; + TimerListHead = TimerListHead->Next; + + if( elapsedTimer->Callback != NULL ) + { + elapsedTimer->Callback( ); + } + } + + // start the next TimerListHead if it exists + if( TimerListHead != NULL ) + { + if( TimerListHead->IsRunning != true ) + { + TimerListHead->IsRunning = true; + TimerSetTimeout( TimerListHead ); + } + } +} + +void TimerStop( TimerEvent_t *obj ) +{ + BoardDisableIrq( ); + + uint32_t elapsedTime = 0; + uint32_t remainingTime = 0; + + TimerEvent_t* prev = TimerListHead; + TimerEvent_t* cur = TimerListHead; + + // List is empty or the Obj to stop does not exist + if( ( TimerListHead == NULL ) || ( obj == NULL ) ) + { + BoardEnableIrq( ); + return; + } + + if( TimerListHead == obj ) // Stop the Head + { + if( TimerListHead->IsRunning == true ) // The head is already running + { + elapsedTime = TimerGetValue( ); + if( elapsedTime > obj->Timestamp ) + { + elapsedTime = obj->Timestamp; + } + + remainingTime = obj->Timestamp - elapsedTime; + + if( TimerListHead->Next != NULL ) + { + TimerListHead->IsRunning = false; + TimerListHead = TimerListHead->Next; + TimerListHead->Timestamp += remainingTime; + TimerListHead->IsRunning = true; + TimerSetTimeout( TimerListHead ); + } + else + { + TimerListHead = NULL; + } + } + else // Stop the head before it is started + { + if( TimerListHead->Next != NULL ) + { + remainingTime = obj->Timestamp; + TimerListHead = TimerListHead->Next; + TimerListHead->Timestamp += remainingTime; + } + else + { + TimerListHead = NULL; + } + } + } + else // Stop an object within the list + { + remainingTime = obj->Timestamp; + + while( cur != NULL ) + { + if( cur == obj ) + { + if( cur->Next != NULL ) + { + cur = cur->Next; + prev->Next = cur; + cur->Timestamp += remainingTime; + } + else + { + cur = NULL; + prev->Next = cur; + } + break; + } + else + { + prev = cur; + cur = cur->Next; + } + } + } + BoardEnableIrq( ); +} + +static bool TimerExists( TimerEvent_t *obj ) +{ + TimerEvent_t* cur = TimerListHead; + + while( cur != NULL ) + { + if( cur == obj ) + { + return true; + } + cur = cur->Next; + } + return false; +} + +void TimerReset( TimerEvent_t *obj ) +{ + TimerStop( obj ); + TimerStart( obj ); +} + +void TimerSetValue( TimerEvent_t *obj, uint32_t value ) +{ + TimerStop( obj ); + obj->Timestamp = value; + obj->ReloadValue = value; +} + +TimerTime_t TimerGetValue( void ) +{ + return RtcGetElapsedAlarmTime( ); +} + +TimerTime_t TimerGetCurrentTime( void ) +{ + return RtcGetTimerValue( ); +} + +TimerTime_t TimerGetElapsedTime( TimerTime_t savedTime ) +{ + return RtcComputeElapsedTime( savedTime ); +} + +TimerTime_t TimerGetFutureTime( TimerTime_t eventInFuture ) +{ + return RtcComputeFutureEventTime( eventInFuture ); +} + +static void TimerSetTimeout( TimerEvent_t *obj ) +{ + HasLoopedThroughMain = 0; + obj->Timestamp = RtcGetAdjustedTimeoutValue( obj->Timestamp ); + RtcSetTimeout( obj->Timestamp ); +} + +void TimerLowPowerHandler( void ) +{ + if( ( TimerListHead != NULL ) && ( TimerListHead->IsRunning == true ) ) + { + if( HasLoopedThroughMain < 5 ) + { + HasLoopedThroughMain++; + } + else + { + HasLoopedThroughMain = 0; + if( GetBoardPowerSource( ) == BATTERY_POWER ) + { + RtcEnterLowPowerStopMode( ); + } + } + } +} diff --git a/lib/system_utils/src/uart.c b/lib/system_utils/src/uart.c new file mode 100755 index 0000000..542b6b5 --- /dev/null +++ b/lib/system_utils/src/uart.c @@ -0,0 +1,170 @@ +/* + / _____) _ | | +( (____ _____ ____ _| |_ _____ ____| |__ + \____ \| ___ | (_ _) ___ |/ ___) _ \ + _____) ) ____| | | || |_| ____( (___| | | | +(______/|_____)_|_|_| \__)_____)\____)_| |_| + (C)2013 Semtech + +Description: Implements the generic UART driver + +License: Revised BSD License, see LICENSE.TXT file include in the project + +Maintainer: Miguel Luis and Gregory Cristian +*/ +#include "board.h" +#include "uart-board.h" +#if defined( USE_USB_CDC ) +#include "uart-usb-board.h" +#endif + +#include "uart.h" + +/*! + * Number of times the UartPutBuffer will try to send the buffer before + * returning ERROR + */ +#define TX_BUFFER_RETRY_COUNT 10 + +void UartInit( Uart_t *obj, uint8_t uartId, PinNames tx, PinNames rx ) +{ + if( obj->IsInitialized == false ) + { + obj->IsInitialized = true; + + if( uartId == UART_USB_CDC ) + { +#if defined( USE_USB_CDC ) + UartUsbInit( obj, uartId, NC, NC ); +#endif + } + else + { + UartMcuInit( obj, uartId, tx, rx ); + } + } +} + +void UartConfig( Uart_t *obj, UartMode_t mode, uint32_t baudrate, WordLength_t wordLength, StopBits_t stopBits, Parity_t parity, FlowCtrl_t flowCtrl ) +{ + if( obj->IsInitialized == false ) + { + // UartInit function must be called first. + assert_param( FAIL ); + } + if( obj->UartId == UART_USB_CDC ) + { +#if defined( USE_USB_CDC ) + UartUsbConfig( obj, mode, baudrate, wordLength, stopBits, parity, flowCtrl ); +#endif + } + else + { + UartMcuConfig( obj, mode, baudrate, wordLength, stopBits, parity, flowCtrl ); + } +} + +void UartDeInit( Uart_t *obj ) +{ + obj->IsInitialized = false; + if( obj->UartId == UART_USB_CDC ) + { +#if defined( USE_USB_CDC ) + UartUsbDeInit( obj ); +#endif + } + else + { + UartMcuDeInit( obj ); + } +} + +uint8_t UartPutChar( Uart_t *obj, uint8_t data ) +{ + if( obj->UartId == UART_USB_CDC ) + { +#if defined( USE_USB_CDC ) + return UartUsbPutChar( obj, data ); +#else + return 255; // Not supported +#endif + } + else + { + return UartMcuPutChar( obj, data ); + } +} + +uint8_t UartGetChar( Uart_t *obj, uint8_t *data ) +{ + if( obj->UartId == UART_USB_CDC ) + { +#if defined( USE_USB_CDC ) + return UartUsbGetChar( obj, data ); +#else + return 255; // Not supported +#endif + } + else + { + return UartMcuGetChar( obj, data ); + } +} + +uint8_t UartPutBuffer( Uart_t *obj, uint8_t *buffer, uint16_t size ) +{ + if( obj->UartId == UART_USB_CDC ) + { +#if defined( USE_USB_CDC ) + return UartUsbPutBuffer( obj, buffer, size ); +#else + return 255; // Not supported +#endif + } + else + { + uint8_t retryCount; + uint16_t i; + + for( i = 0; i < size; i++ ) + { + retryCount = 0; + while( UartPutChar( obj, buffer[i] ) != 0 ) + { + retryCount++; + + // Exit if something goes terribly wrong + if( retryCount > TX_BUFFER_RETRY_COUNT ) + { + return 1; // Error + } + } + } + return 0; // OK + } +} + +uint8_t UartGetBuffer( Uart_t *obj, uint8_t *buffer, uint16_t size, uint16_t *nbReadBytes ) +{ + uint16_t localSize = 0; + + while( localSize < size ) + { + if( UartGetChar( obj, buffer + localSize ) == 0 ) + { + localSize++; + } + else + { + break; + } + } + + *nbReadBytes = localSize; + + if( localSize == 0 ) + { + return 1; // Empty + } + return 0; // OK +} diff --git a/lib/system_utils/timer.h b/lib/system_utils/timer.h new file mode 100755 index 0000000..0195a83 --- /dev/null +++ b/lib/system_utils/timer.h @@ -0,0 +1,110 @@ +/* + / _____) _ | | +( (____ _____ ____ _| |_ _____ ____| |__ + \____ \| ___ | (_ _) ___ |/ ___) _ \ + _____) ) ____| | | || |_| ____( (___| | | | +(______/|_____)_|_|_| \__)_____)\____)_| |_| + (C)2013 Semtech + +Description: Timer objects and scheduling management + +License: Revised BSD License, see LICENSE.TXT file include in the project + +Maintainer: Miguel Luis and Gregory Cristian +*/ +#ifndef __TIMER_H__ +#define __TIMER_H__ + +/*! + * \brief Timer object description + */ +typedef struct TimerEvent_s +{ + uint32_t Timestamp; //! Current timer value + uint32_t ReloadValue; //! Timer delay value + bool IsRunning; //! Is the timer currently running + void ( *Callback )( void ); //! Timer IRQ callback function + struct TimerEvent_s *Next; //! Pointer to the next Timer object. +}TimerEvent_t; + +/*! + * \brief Timer time variable definition + */ +#ifndef TimerTime_t +typedef uint32_t TimerTime_t; +#endif + +/*! + * \brief Initializes the timer object + * + * \remark TimerSetValue function must be called before starting the timer. + * this function initializes timestamp and reload value at 0. + * + * \param [IN] obj Structure containing the timer object parameters + * \param [IN] callback Function callback called at the end of the timeout + */ +void TimerInit( TimerEvent_t *obj, void ( *callback )( void ) ); + +/*! + * Timer IRQ event handler + */ +void TimerIrqHandler( void ); + +/*! + * \brief Starts and adds the timer object to the list of timer events + * + * \param [IN] obj Structure containing the timer object parameters + */ +void TimerStart( TimerEvent_t *obj ); + +/*! + * \brief Stops and removes the timer object from the list of timer events + * + * \param [IN] obj Structure containing the timer object parameters + */ +void TimerStop( TimerEvent_t *obj ); + +/*! + * \brief Resets the timer object + * + * \param [IN] obj Structure containing the timer object parameters + */ +void TimerReset( TimerEvent_t *obj ); + +/*! + * \brief Set timer new timeout value + * + * \param [IN] obj Structure containing the timer object parameters + * \param [IN] value New timer timeout value + */ +void TimerSetValue( TimerEvent_t *obj, uint32_t value ); + +/*! + * \brief Read the current time + * + * \retval time returns current time + */ +TimerTime_t TimerGetCurrentTime( void ); + +/*! + * \brief Return the Time elapsed since a fix moment in Time + * + * \param [IN] savedTime fix moment in Time + * \retval time returns elapsed time + */ +TimerTime_t TimerGetElapsedTime( TimerTime_t savedTime ); + +/*! + * \brief Return the Time elapsed since a fix moment in Time + * + * \param [IN] eventInFuture fix moment in the future + * \retval time returns difference between now and future event + */ +TimerTime_t TimerGetFutureTime( TimerTime_t eventInFuture ); + +/*! + * \brief Manages the entry into ARM cortex deep-sleep mode + */ +void TimerLowPowerHandler( void ); + +#endif // __TIMER_H__ diff --git a/lib/system_utils/uart.h b/lib/system_utils/uart.h new file mode 100755 index 0000000..50a2f02 --- /dev/null +++ b/lib/system_utils/uart.h @@ -0,0 +1,167 @@ +/* + / _____) _ | | +( (____ _____ ____ _| |_ _____ ____| |__ + \____ \| ___ | (_ _) ___ |/ ___) _ \ + _____) ) ____| | | || |_| ____( (___| | | | +(______/|_____)_|_|_| \__)_____)\____)_| |_| + (C)2013 Semtech + +Description: Implements the generic UART driver + +License: Revised BSD License, see LICENSE.TXT file include in the project + +Maintainer: Miguel Luis and Gregory Cristian +*/ +#ifndef __UART_H__ +#define __UART_H__ + +#include "fifo.h" + +/*! + * UART notification identifier + */ +typedef enum +{ + UART_NOTIFY_TX, + UART_NOTIFY_RX +}UartNotifyId_t; + +/*! + * UART object type definition + */ +typedef struct +{ + uint8_t UartId; + bool IsInitialized; + Gpio_t Tx; + Gpio_t Rx; + Fifo_t FifoTx; + Fifo_t FifoRx; + /*! + * IRQ user notification callback prototype. + */ + void ( *IrqNotify )( UartNotifyId_t id ); +}Uart_t; + +/*! + * Operation Mode for the UART + */ +typedef enum +{ + TX_ONLY = 0, + RX_ONLY, + RX_TX +}UartMode_t; + +/*! + * UART word length + */ +typedef enum +{ + UART_8_BIT = 0, + UART_9_BIT +}WordLength_t; + +/*! + * UART stop bits + */ +typedef enum +{ + UART_1_STOP_BIT = 0, + UART_0_5_STOP_BIT, + UART_2_STOP_BIT, + UART_1_5_STOP_BIT +}StopBits_t; + +/*! + * UART parity + */ +typedef enum +{ + NO_PARITY = 0, + EVEN_PARITY, + ODD_PARITY +}Parity_t; + +/*! + * UART flow control + */ +typedef enum +{ + NO_FLOW_CTRL = 0, + RTS_FLOW_CTRL, + CTS_FLOW_CTRL, + RTS_CTS_FLOW_CTRL +}FlowCtrl_t; + +/*! + * \brief Initializes the UART object and MCU peripheral + * + * \param [IN] obj UART object + * \param [IN] tx UART Tx pin name to be used + * \param [IN] rx UART Rx pin name to be used + */ +void UartInit( Uart_t *obj, uint8_t uartId, PinNames tx, PinNames rx ); + +/*! + * \brief Configures the UART object and MCU peripheral + * + * \remark UartInit function must be called first. + * + * \param [IN] obj UART object + * \param [IN] mode Mode of operation for the UART + * \param [IN] baudrate UART baudrate + * \param [IN] wordLength packet length + * \param [IN] stopBits stop bits setup + * \param [IN] parity packet parity + * \param [IN] flowCtrl UART flow control + */ +void UartConfig( Uart_t *obj, UartMode_t mode, uint32_t baudrate, WordLength_t wordLength, StopBits_t stopBits, Parity_t parity, FlowCtrl_t flowCtrl ); + +/*! + * \brief DeInitializes the UART object and MCU pin + * + * \param [IN] obj UART object + */ +void UartDeInit( Uart_t *obj ); + +/*! + * \brief Sends a character to the UART + * + * \param [IN] obj UART object + * \param [IN] data Character to be sent + * \retval status [0: OK, 1: Busy] + */ +uint8_t UartPutChar( Uart_t *obj, uint8_t data ); + +/*! + * \brief Gets a character from the UART + * + * \param [IN] obj UART object + * \param [IN] data Received character + * \retval status [0: OK, 1: Busy] + */ +uint8_t UartGetChar( Uart_t *obj, uint8_t *data ); + +/*! + * \brief Sends a buffer to the UART + * + * \param [IN] obj UART object + * \param [IN] buffer Buffer to be sent + * \param [IN] size Buffer size + * \retval status [0: OK, 1: Busy] + */ +uint8_t UartPutBuffer( Uart_t *obj, uint8_t *buffer, uint16_t size ); + +/*! + * \brief Gets a character from the UART + * + * \param [IN] obj UART object + * \param [IN] buffer Buffer to be sent + * \param [IN] size Buffer size + * \param [OUT] nbReadBytes Number of bytes really read + * \retval status [0: OK, 1: Busy] + */ +uint8_t UartGetBuffer( Uart_t *obj, uint8_t *buffer, uint16_t size, uint16_t *nbReadBytes ); + +#endif // __UART_H__ diff --git a/platformio.ini b/platformio.ini new file mode 100644 index 0000000..e50fe86 --- /dev/null +++ b/platformio.ini @@ -0,0 +1,20 @@ +; PlatformIO Project Configuration File +; +; Build options: build flags, source filter +; Upload options: custom upload port, speed and extra flags +; Library options: dependencies, extra library storages +; Advanced options: extra scripting +; +; Please visit documentation for the other options and examples +; http://docs.platformio.org/page/projectconf.html1 + + +[env:rak811] +lib_dir = lib +src_dir = src, src/RAK811BreakBoard/ +lib_extra_dirs = crypto , radio/sx1276 +lib_deps = system_utils, Retarget_printf +platform = ststm32 +board = rak811 +framework=cmsis +build_flags = -D USE_DEBUGGER -D STM32L151xB -D STM32L151CBU6 -D REGION_EU868 -std=gnu99 -I lib/crypto -I lib/radio -I lib/radio/sx1276 -I src/mac -I src/usb/dfu/inc -I src/mac/region -I lib/system_utils/crypto -I src/boards/mcu/stm32/STM32_USB_Device_Library/Class/DFU/Inc/ -I src/boards/mcu/stm32/STM32_USB_Device_Library/Class/CDC/Inc/ -I src/usb/cdc/inc -I src/boards/mcu/stm32/STM32_USB_Device_Library/Core/Inc/ -I src/boards/mcu/stm32/STM32L0xx_HAL_Driver/Inc/ -I src/peripherals/ -I src/boards/mcu/stm32/ -I src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc -I src/RAK811BreakBoard/cmsis/ -I src/RAK811BreakBoard/ -IRAK811_BreakBoard/src -I lib/system_utils -I RAK811_BreakBoard/src/boards/RAK811BreakBoard -I RAK811_BreakBoard/src/boards/RAK811BreakBoard/cmsis -I .piolibdeps/mbed-dev_ID2491/targets/TARGET_STM/TARGET_STM32L1/TARGET_MOTE_L152RC/device/ -I RAK811_BreakBoard/src/boards/mcu/stm32/cmsis/ -I RAK811_BreakBoard/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc -I RAK811_BreakBoard/src/boards/mcu/stm32 -I RAK811_BreakBoard/src/system/ -I RAK811_BreakBoard/src/radio -I RAK811_BreakBoard/src/peripherals/ -I RAK811_BreakBoard/src/mac -I RAK811_BreakBoard/src/mac/region/ diff --git a/rak811.json b/rak811.json new file mode 100644 index 0000000..4760b95 --- /dev/null +++ b/rak811.json @@ -0,0 +1,32 @@ +{ + "build": { + "core": "stm32", + "cpu": "cortex-m3", + "extra_flags": "-DSTM32L151xB -DSTM32L151CBU6", + "hwids": [ + [ + "0x0429", + "0x0003" + ], + [ + "0x0429", + "0x0004" + ] + ], + "f_cpu": "32768000L", + "mcu": "stm32l151cbu6", + "variant": "stm32l151xba", + "ldscript": "/home/olof/rak/STM32L151XBA_FLASH.ld" + }, + "frameworks": [ + "mbed", + "cmsis" + ], + "name": "Rak811", + "upload": { + "maximum_ram_size": 32768, + "maximum_size": 128000 + }, + "url": "http://www.rakwireless.com/en/download/RAK811/Hardware%20Design", + "vendor": "RAK" +} \ No newline at end of file diff --git a/src/Commissioning.h b/src/Commissioning.h new file mode 100755 index 0000000..cbc7b35 --- /dev/null +++ b/src/Commissioning.h @@ -0,0 +1,77 @@ +/* + / _____) _ | | +( (____ _____ ____ _| |_ _____ ____| |__ + \____ \| ___ | (_ _) ___ |/ ___) _ \ + _____) ) ____| | | || |_| ____( (___| | | | +(______/|_____)_|_|_| \__)_____)\____)_| |_| + (C)2015 Semtech + +Description: End device commissioning parameters + +License: Revised BSD License, see LICENSE.TXT file include in the project + +Maintainer: Miguel Luis and Gregory Cristian +*/ +#ifndef __LORA_COMMISSIONING_H__ +#define __LORA_COMMISSIONING_H__ + +/*! + * When set to 1 the application uses the Over-the-Air activation procedure + * When set to 0 the application uses the Personalization activation procedure + */ +#define OVER_THE_AIR_ACTIVATION 1 + +/*! + * Indicates if the end-device is to be connected to a private or public network + */ +#define LORAWAN_PUBLIC_NETWORK true + +/*! + * IEEE Organizationally Unique Identifier ( OUI ) (big endian) + * \remark This is unique to a company or organization + */ +#define IEEE_OUI 0x60, 0xC5, 0xA8 + +/*! + * Mote device IEEE EUI (big endian) + * + * \remark In this application the value is automatically generated by calling + * BoardGetUniqueId function + */ +#define LORAWAN_DEVICE_EUI { IEEE_OUI, 0xFF, 0xEE, 0x00, 0x00, 0x20 } + +/*! + * Application IEEE EUI (big endian) + */ +#define LORAWAN_APPLICATION_EUI { 0x70, 0xB3, 0xd5, 0x7E, 0xD0, 0x00, 0x86, 0xE2 } + //70b3d57ef00046a4 70B3D57E D0007DFA +/*! + * AES encryption/decryption cipher application key + */ +#define LORAWAN_APPLICATION_KEY { 0x19, 0xA1, 0xE6, 0xF6, 0x77, 0xC4, 0xBE, 0x5E, 0xAC, 0xDE, 0x57, 0x29, 0x1F, 0x86, 0x8C, 0x3B } + //a6b08140dae1d795ebfa5a6dee1f4dbd 09A503D6256F9EF612A15181F583880A +/*! + * Current network ID + */ +#define LORAWAN_NETWORK_ID ( uint32_t )0 + +/*! + * Device address on the network (big endian) + * + * \remark In this application the value is automatically generated using + * a pseudo random generator seeded with a value derived from + * BoardUniqueId value if LORAWAN_DEVICE_ADDRESS is set to 0 + */ +#define LORAWAN_DEVICE_ADDRESS ( uint32_t )0x00000000 + +/*! + * AES encryption/decryption cipher network session key + */ +#define LORAWAN_NWKSKEY { 0x2B, 0x7E, 0x15, 0x16, 0x28, 0xAE, 0xD2, 0xA6, 0xAB, 0xF7, 0x15, 0x88, 0x09, 0xCF, 0x4F, 0x3C } + +/*! + * AES encryption/decryption cipher application session key + */ +#define LORAWAN_APPSKEY { 0x2B, 0x7E, 0x15, 0x16, 0x28, 0xAE, 0xD2, 0xA6, 0xAB, 0xF7, 0x15, 0x88, 0x09, 0xCF, 0x4F, 0x3C } + +#endif // __LORA_COMMISSIONING_H__ diff --git a/src/RAK811BreakBoard/adc-board.c b/src/RAK811BreakBoard/adc-board.c new file mode 100755 index 0000000..e2530fc --- /dev/null +++ b/src/RAK811BreakBoard/adc-board.c @@ -0,0 +1,94 @@ +/* + / _____) _ | | +( (____ _____ ____ _| |_ _____ ____| |__ + \____ \| ___ | (_ _) ___ |/ ___) _ \ + _____) ) ____| | | || |_| ____( (___| | | | +(______/|_____)_|_|_| \__)_____)\____)_| |_| + (C)2016 Semtech + +Description: Board ADC driver implementation + +License: Revised BSD License, see LICENSE.TXT file include in the project + +Maintainer: Miguel Luis and Gregory Cristian +*/ +#include "board.h" +#include "adc-board.h" + +ADC_HandleTypeDef AdcHandle; + +void AdcMcuInit( Adc_t *obj, PinNames adcInput ) +{ + AdcHandle.Instance = ( ADC_TypeDef* )ADC1_BASE; + + __HAL_RCC_ADC1_CLK_ENABLE( ); + + HAL_ADC_DeInit( &AdcHandle ); + + if( adcInput != NC ) + { + GpioInit( &obj->AdcInput, adcInput, PIN_ANALOGIC, PIN_PUSH_PULL, PIN_NO_PULL, 0 ); + } +} + +void AdcMcuConfig( void ) +{ + // Configure ADC + AdcHandle.Init.Resolution = ADC_RESOLUTION_12B; + AdcHandle.Init.DataAlign = ADC_DATAALIGN_RIGHT; + AdcHandle.Init.ContinuousConvMode = DISABLE; + AdcHandle.Init.DiscontinuousConvMode = DISABLE; + AdcHandle.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_NONE; + AdcHandle.Init.ExternalTrigConv = ADC_EXTERNALTRIGCONV_T6_TRGO; + AdcHandle.Init.DMAContinuousRequests = DISABLE; + AdcHandle.Init.EOCSelection = ADC_EOC_SINGLE_CONV; + AdcHandle.Init.NbrOfConversion = 1; + AdcHandle.Init.LowPowerAutoWait = DISABLE; + AdcHandle.Init.LowPowerAutoPowerOff = DISABLE; + HAL_ADC_Init( &AdcHandle ); +} + +uint16_t AdcMcuReadChannel( Adc_t *obj, uint32_t channel ) +{ + ADC_ChannelConfTypeDef adcConf = { 0 }; + uint16_t adcData = 0; + + // Enable HSI + __HAL_RCC_HSI_ENABLE( ); + + // Wait till HSI is ready + while( __HAL_RCC_GET_FLAG( RCC_FLAG_HSIRDY ) == RESET ) + { + } + + __HAL_RCC_ADC1_CLK_ENABLE( ); + + adcConf.Channel = channel; + adcConf.Rank = ADC_REGULAR_RANK_1; + adcConf.SamplingTime = ADC_SAMPLETIME_192CYCLES; + + HAL_ADC_ConfigChannel( &AdcHandle, &adcConf ); + + // Enable ADC1 + __HAL_ADC_ENABLE( &AdcHandle ); + + // Start ADC Software Conversion + HAL_ADC_Start( &AdcHandle ); + + HAL_ADC_PollForConversion( &AdcHandle, HAL_MAX_DELAY ); + + adcData = HAL_ADC_GetValue( &AdcHandle ); + + __HAL_ADC_DISABLE( &AdcHandle ); + + if( ( adcConf.Channel == ADC_CHANNEL_TEMPSENSOR ) || ( adcConf.Channel == ADC_CHANNEL_VREFINT ) ) + { + HAL_ADC_DeInit( &AdcHandle ); + } + __HAL_RCC_ADC1_CLK_DISABLE( ); + + // Disable HSI + __HAL_RCC_HSI_DISABLE( ); + + return adcData; +} diff --git a/src/RAK811BreakBoard/adc-board.h b/src/RAK811BreakBoard/adc-board.h new file mode 100755 index 0000000..0bf268d --- /dev/null +++ b/src/RAK811BreakBoard/adc-board.h @@ -0,0 +1,39 @@ +/* + / _____) _ | | +( (____ _____ ____ _| |_ _____ ____| |__ + \____ \| ___ | (_ _) ___ |/ ___) _ \ + _____) ) ____| | | || |_| ____( (___| | | | +(______/|_____)_|_|_| \__)_____)\____)_| |_| + (C)2016 Semtech + +Description: Board ADC driver implementation + +License: Revised BSD License, see LICENSE.TXT file include in the project + +Maintainer: Miguel Luis and Gregory Cristian +*/ +#ifndef __ADC_MCU_H__ +#define __ADC_MCU_H__ + +/*! + * \brief Initializes the ADC object and MCU peripheral + * + * \param [IN] obj ADC object + * \param [IN] adcInput ADC input pin + */ +void AdcMcuInit( Adc_t *obj, PinNames adcInput ); + +/*! + * \brief Initializes the ADC internal parameters + */ +void AdcMcuConfig( void ); + +/*! + * \brief Reads the value of the given channel + * + * \param [IN] obj ADC object + * \param [IN] channel ADC input channel + */ +uint16_t AdcMcuReadChannel( Adc_t *obj, uint32_t channel ); + +#endif // __ADC_MCU_H__ diff --git a/src/RAK811BreakBoard/board.c b/src/RAK811BreakBoard/board.c new file mode 100755 index 0000000..6990ce0 --- /dev/null +++ b/src/RAK811BreakBoard/board.c @@ -0,0 +1,410 @@ +/* + / _____) _ | | +( (____ _____ ____ _| |_ _____ ____| |__ + \____ \| ___ | (_ _) ___ |/ ___) _ \ + _____) ) ____| | | || |_| ____( (___| | | | +(______/|_____)_|_|_| \__)_____)\____)_| |_| + (C)2013 Semtech + +Description: Target board general functions implementation + +License: Revised BSD License, see LICENSE.TXT file include in the project + +Maintainer: Miguel Luis and Gregory Cristian +*/ +#include "board.h" + +/*! + * Unique Devices IDs register set ( STM32L1xxx ) + */ +#define ID1 ( 0x1FF80050 ) +#define ID2 ( 0x1FF80054 ) +#define ID3 ( 0x1FF80064 ) + +/*! + * LED GPIO pins objects + */ +Gpio_t Led1; +Gpio_t Led2; + +/* + * MCU objects + */ +Adc_t Adc; +I2c_t I2c; +Uart_t Uart1; +Uart_t GpsUart; +#if defined( USE_USB_CDC ) +Uart_t UartUsb; +#endif + +/*! + * Initializes the unused GPIO to a know status + */ +static void BoardUnusedIoInit( void ); + +/*! + * System Clock Configuration + */ +static void SystemClockConfig( void ); + +/*! + * Used to measure and calibrate the system wake-up time from STOP mode + */ +static void CalibrateSystemWakeupTime( void ); + +/*! + * System Clock Re-Configuration when waking up from STOP mode + */ +static void SystemClockReConfig( void ); + +/*! + * Timer used at first boot to calibrate the SystemWakeupTime + */ +static TimerEvent_t CalibrateSystemWakeupTimeTimer; + +/*! + * Flag to indicate if the MCU is Initialized + */ +static bool McuInitialized = false; + +/*! + * Flag to indicate if the SystemWakeupTime is Calibrated + */ +static bool SystemWakeupTimeCalibrated = false; + +/*! + * Callback indicating the end of the system wake-up time calibration + */ +static void OnCalibrateSystemWakeupTimeTimerEvent( void ) +{ + SystemWakeupTimeCalibrated = true; +} + +/*! + * Nested interrupt counter. + * + * \remark Interrupt should only be fully disabled once the value is 0 + */ +static uint8_t IrqNestLevel = 0; + +void BoardDisableIrq( void ) +{ + __disable_irq( ); + IrqNestLevel++; +} + +void BoardEnableIrq( void ) +{ + IrqNestLevel--; + if( IrqNestLevel == 0 ) + { + __enable_irq( ); + } +} + +void BoardInitPeriph( void ) +{ + Gpio_t ioPin; + + // Init the GPIO pins + GpioInit( &ioPin, GPS_POWER_ON_PIN, PIN_OUTPUT, PIN_PUSH_PULL, PIN_NO_PULL, 0 ); + GpioInit( &Led1, LED_1, PIN_OUTPUT, PIN_PUSH_PULL, PIN_NO_PULL, 0 ); + GpioInit( &Led2, LED_2, PIN_OUTPUT, PIN_PUSH_PULL, PIN_NO_PULL, 0 ); + + //Init GPS + GpsInit( ); + + //Init LIS3DH + LIS3DH_Init( ); + + // Switch LED 1, 2 OFF + GpioWrite( &Led1, 1 ); + GpioWrite( &Led2, 1 ); +} + +void BoardInitMcu( void ) +{ + if( McuInitialized == false ) + { +#if defined( USE_BOOTLOADER ) + // Set the Vector Table base location at 0x3000 + SCB->VTOR = FLASH_BASE | 0x3000; +#endif + HAL_Init( ); + + SystemClockConfig( ); + + UartMcuInit(&Uart1, UART_1, UART_TX, UART_RX); + UartMcuConfig(&Uart1, RX_TX, 115200, + UART_8_BIT, + UART_1_STOP_BIT, + NO_PARITY, + NO_FLOW_CTRL); + RtcInit( ); + + BoardUnusedIoInit( ); + } + else + { + SystemClockReConfig( ); + } + + AdcInit( &Adc, BAT_LEVEL_PIN ); + + SpiInit( &SX1276.Spi, RADIO_MOSI, RADIO_MISO, RADIO_SCLK, NC ); + SX1276IoInit( ); + GpioInit( &SX1276.Xtal, RADIO_XTAL_EN, PIN_OUTPUT, PIN_PUSH_PULL, PIN_NO_PULL, 1 ); + + if( McuInitialized == false ) + { + McuInitialized = true; + if( GetBoardPowerSource( ) == BATTERY_POWER ) + { + CalibrateSystemWakeupTime( ); + } + } +} + +void BoardDeInitMcu( void ) +{ + //Gpio_t ioPin; + + AdcDeInit( &Adc ); + + SpiDeInit( &SX1276.Spi ); + SX1276IoDeInit( ); + + //GpioInit( &ioPin, OSC_LSE_IN, PIN_INPUT, PIN_PUSH_PULL, PIN_NO_PULL, 0 ); + //GpioInit( &ioPin, OSC_LSE_OUT, PIN_INPUT, PIN_PUSH_PULL, PIN_NO_PULL, 0 ); + + GpioWrite( &SX1276.Xtal, 0 ); +} + +uint32_t BoardGetRandomSeed( void ) +{ + return ( ( *( uint32_t* )ID1 ) ^ ( *( uint32_t* )ID2 ) ^ ( *( uint32_t* )ID3 ) ); +} + +void BoardGetUniqueId( uint8_t *id ) +{ + id[7] = ( ( *( uint32_t* )ID1 )+ ( *( uint32_t* )ID3 ) ) >> 24; + id[6] = ( ( *( uint32_t* )ID1 )+ ( *( uint32_t* )ID3 ) ) >> 16; + id[5] = ( ( *( uint32_t* )ID1 )+ ( *( uint32_t* )ID3 ) ) >> 8; + id[4] = ( ( *( uint32_t* )ID1 )+ ( *( uint32_t* )ID3 ) ); + id[3] = ( ( *( uint32_t* )ID2 ) ) >> 24; + id[2] = ( ( *( uint32_t* )ID2 ) ) >> 16; + id[1] = ( ( *( uint32_t* )ID2 ) ) >> 8; + id[0] = ( ( *( uint32_t* )ID2 ) ); +} + +/*! + * Factory power supply + */ +#define FACTORY_POWER_SUPPLY 3300 // mV + +/*! + * VREF calibration value + */ +#define VREFINT_CAL ( *( uint16_t* )0x1FF80078 ) + +/*! + * ADC maximum value + */ +#define ADC_MAX_VALUE 4095 + +/*! + * Battery thresholds + */ +#define BATTERY_MAX_LEVEL 4150 // mV +#define BATTERY_MIN_LEVEL 3200 // mV +#define BATTERY_SHUTDOWN_LEVEL 3100 // mV + +static uint16_t BatteryVoltage = BATTERY_MAX_LEVEL; + +uint16_t BoardBatteryMeasureVolage( void ) +{ + uint16_t vdd = 0; + uint16_t vref = VREFINT_CAL; + uint16_t vdiv = 0; + uint16_t batteryVoltage = 0; + + vdiv = AdcReadChannel( &Adc, BAT_LEVEL_CHANNEL ); + //vref = AdcReadChannel( &Adc, ADC_CHANNEL_VREFINT ); + + vdd = ( float )FACTORY_POWER_SUPPLY * ( float )VREFINT_CAL / ( float )vref; + batteryVoltage = vdd * ( ( float )vdiv / ( float )ADC_MAX_VALUE ); + + // vDiv + // Divider bridge VBAT <-> 100k -<--|-->- 150k <-> GND => vBat = (5 * vDiv )/3 + batteryVoltage = (5 * batteryVoltage )/3; + return batteryVoltage; +} + +uint32_t BoardGetBatteryVoltage( void ) +{ + return BatteryVoltage; +} + +uint8_t BoardGetBatteryLevel( void ) +{ + uint8_t batteryLevel = 0; + + BatteryVoltage = BoardBatteryMeasureVolage( ); + + if( GetBoardPowerSource( ) == USB_POWER ) + { + batteryLevel = 0; + } + else + { + if( BatteryVoltage >= BATTERY_MAX_LEVEL ) + { + batteryLevel = 254; + } + else if( ( BatteryVoltage > BATTERY_MIN_LEVEL ) && ( BatteryVoltage < BATTERY_MAX_LEVEL ) ) + { + batteryLevel = ( ( 253 * ( BatteryVoltage - BATTERY_MIN_LEVEL ) ) / ( BATTERY_MAX_LEVEL - BATTERY_MIN_LEVEL ) ) + 1; + } + else if( ( BatteryVoltage > BATTERY_SHUTDOWN_LEVEL ) && ( BatteryVoltage <= BATTERY_MIN_LEVEL ) ) + { + batteryLevel = 1; + } + else //if( BatteryVoltage <= BATTERY_SHUTDOWN_LEVEL ) + { + batteryLevel = 255; + //GpioInit( &DcDcEnable, DC_DC_EN, PIN_OUTPUT, PIN_PUSH_PULL, PIN_NO_PULL, 0 ); + //GpioInit( &BoardPowerDown, BOARD_POWER_DOWN, PIN_OUTPUT, PIN_PUSH_PULL, PIN_NO_PULL, 1 ); + } + } + return batteryLevel; +} + +static void BoardUnusedIoInit( void ) +{ + +#if defined( USE_DEBUGGER ) + HAL_DBGMCU_EnableDBGStopMode( ); + HAL_DBGMCU_EnableDBGSleepMode( ); + HAL_DBGMCU_EnableDBGStandbyMode( ); +#else + HAL_DBGMCU_DisableDBGSleepMode( ); + HAL_DBGMCU_DisableDBGStopMode( ); + HAL_DBGMCU_DisableDBGStandbyMode( ); + + GpioInit( &ioPin, SWDIO, PIN_ANALOGIC, PIN_PUSH_PULL, PIN_NO_PULL, 0 ); + GpioInit( &ioPin, SWCLK, PIN_ANALOGIC, PIN_PUSH_PULL, PIN_NO_PULL, 0 ); +#endif +} + +void SystemClockConfig( void ) +{ + RCC_OscInitTypeDef RCC_OscInitStruct; + RCC_ClkInitTypeDef RCC_ClkInitStruct; + RCC_PeriphCLKInitTypeDef PeriphClkInit; + + __HAL_RCC_PWR_CLK_ENABLE( ); + + __HAL_PWR_VOLTAGESCALING_CONFIG( PWR_REGULATOR_VOLTAGE_SCALE2 ); + + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI|RCC_OSCILLATORTYPE_LSE; + RCC_OscInitStruct.HSIState = RCC_HSI_ON; + RCC_OscInitStruct.LSEState = RCC_LSE_ON; + RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_OFF; +// RCC_OscInitStruct.MSIClockRange = RCC_MSIRANGE_6; +// RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI; +// RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL8; +// RCC_OscInitStruct.PLL.PLLDIV = RCC_PLL_DIV3; + HAL_RCC_OscConfig( &RCC_OscInitStruct ); + + RCC_ClkInitStruct.ClockType = ( RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2 ); + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_HSI; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; + HAL_RCC_ClockConfig( &RCC_ClkInitStruct, FLASH_LATENCY_1 ); + + PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_RTC; + PeriphClkInit.RTCClockSelection = RCC_RTCCLKSOURCE_LSE; + HAL_RCCEx_PeriphCLKConfig( &PeriphClkInit ); + + HAL_SYSTICK_Config( HAL_RCC_GetHCLKFreq( ) / 1000 ); + + HAL_SYSTICK_CLKSourceConfig( SYSTICK_CLKSOURCE_HCLK ); + + /* HAL_NVIC_GetPriorityGrouping*/ + HAL_NVIC_SetPriorityGrouping( NVIC_PRIORITYGROUP_4 ); + + /* SysTick_IRQn interrupt configuration */ + HAL_NVIC_SetPriority( SysTick_IRQn, 0, 0 ); +} + +void CalibrateSystemWakeupTime( void ) +{ + if( SystemWakeupTimeCalibrated == false ) + { + TimerInit( &CalibrateSystemWakeupTimeTimer, OnCalibrateSystemWakeupTimeTimerEvent ); + TimerSetValue( &CalibrateSystemWakeupTimeTimer, 1000 ); + TimerStart( &CalibrateSystemWakeupTimeTimer ); + while( SystemWakeupTimeCalibrated == false ) + { + TimerLowPowerHandler( ); + } + } +} + +void SystemClockReConfig( void ) +{ + __HAL_RCC_PWR_CLK_ENABLE( ); + __HAL_PWR_VOLTAGESCALING_CONFIG( PWR_REGULATOR_VOLTAGE_SCALE2 ); + + /* Enable HSI */ + __HAL_RCC_HSI_ENABLE(); + /* Wait till HSE is ready */ + while( __HAL_RCC_GET_FLAG( RCC_FLAG_HSIRDY ) == RESET ) + { + } + + /* Select HSI as system clock source */ + __HAL_RCC_SYSCLK_CONFIG ( RCC_SYSCLKSOURCE_HSI ); + + /* Wait till HSI is used as system clock source */ + while( __HAL_RCC_GET_SYSCLK_SOURCE( ) != RCC_SYSCLKSOURCE_STATUS_HSI ) + { + } +} + +void SysTick_Handler( void ) +{ + HAL_IncTick( ); + HAL_SYSTICK_IRQHandler( ); +} + +uint8_t GetBoardPowerSource( void ) +{ + return USB_POWER; // USB_POWER BATTERY_POWER +} + +#ifdef USE_FULL_ASSERT +/* + * Function Name : assert_failed + * Description : Reports the name of the source file and the source line number + * where the assert_param error has occurred. + * Input : - file: pointer to the source file name + * - line: assert_param error line source number + * Output : None + * Return : None + */ +void assert_failed( uint8_t* file, uint32_t line ) +{ + /* User can add his own implementation to report the file name and line number, + ex: printf("Wrong parameters value: file %s on line %u\r\n", file, line) */ + + printf( "Wrong parameters value: file %s on line %u\r\n", ( const char* )file, line ); + /* Infinite loop */ + while( 1 ) + { + } +} +#endif diff --git a/src/RAK811BreakBoard/board.c~ b/src/RAK811BreakBoard/board.c~ new file mode 100755 index 0000000..6990ce0 --- /dev/null +++ b/src/RAK811BreakBoard/board.c~ @@ -0,0 +1,410 @@ +/* + / _____) _ | | +( (____ _____ ____ _| |_ _____ ____| |__ + \____ \| ___ | (_ _) ___ |/ ___) _ \ + _____) ) ____| | | || |_| ____( (___| | | | +(______/|_____)_|_|_| \__)_____)\____)_| |_| + (C)2013 Semtech + +Description: Target board general functions implementation + +License: Revised BSD License, see LICENSE.TXT file include in the project + +Maintainer: Miguel Luis and Gregory Cristian +*/ +#include "board.h" + +/*! + * Unique Devices IDs register set ( STM32L1xxx ) + */ +#define ID1 ( 0x1FF80050 ) +#define ID2 ( 0x1FF80054 ) +#define ID3 ( 0x1FF80064 ) + +/*! + * LED GPIO pins objects + */ +Gpio_t Led1; +Gpio_t Led2; + +/* + * MCU objects + */ +Adc_t Adc; +I2c_t I2c; +Uart_t Uart1; +Uart_t GpsUart; +#if defined( USE_USB_CDC ) +Uart_t UartUsb; +#endif + +/*! + * Initializes the unused GPIO to a know status + */ +static void BoardUnusedIoInit( void ); + +/*! + * System Clock Configuration + */ +static void SystemClockConfig( void ); + +/*! + * Used to measure and calibrate the system wake-up time from STOP mode + */ +static void CalibrateSystemWakeupTime( void ); + +/*! + * System Clock Re-Configuration when waking up from STOP mode + */ +static void SystemClockReConfig( void ); + +/*! + * Timer used at first boot to calibrate the SystemWakeupTime + */ +static TimerEvent_t CalibrateSystemWakeupTimeTimer; + +/*! + * Flag to indicate if the MCU is Initialized + */ +static bool McuInitialized = false; + +/*! + * Flag to indicate if the SystemWakeupTime is Calibrated + */ +static bool SystemWakeupTimeCalibrated = false; + +/*! + * Callback indicating the end of the system wake-up time calibration + */ +static void OnCalibrateSystemWakeupTimeTimerEvent( void ) +{ + SystemWakeupTimeCalibrated = true; +} + +/*! + * Nested interrupt counter. + * + * \remark Interrupt should only be fully disabled once the value is 0 + */ +static uint8_t IrqNestLevel = 0; + +void BoardDisableIrq( void ) +{ + __disable_irq( ); + IrqNestLevel++; +} + +void BoardEnableIrq( void ) +{ + IrqNestLevel--; + if( IrqNestLevel == 0 ) + { + __enable_irq( ); + } +} + +void BoardInitPeriph( void ) +{ + Gpio_t ioPin; + + // Init the GPIO pins + GpioInit( &ioPin, GPS_POWER_ON_PIN, PIN_OUTPUT, PIN_PUSH_PULL, PIN_NO_PULL, 0 ); + GpioInit( &Led1, LED_1, PIN_OUTPUT, PIN_PUSH_PULL, PIN_NO_PULL, 0 ); + GpioInit( &Led2, LED_2, PIN_OUTPUT, PIN_PUSH_PULL, PIN_NO_PULL, 0 ); + + //Init GPS + GpsInit( ); + + //Init LIS3DH + LIS3DH_Init( ); + + // Switch LED 1, 2 OFF + GpioWrite( &Led1, 1 ); + GpioWrite( &Led2, 1 ); +} + +void BoardInitMcu( void ) +{ + if( McuInitialized == false ) + { +#if defined( USE_BOOTLOADER ) + // Set the Vector Table base location at 0x3000 + SCB->VTOR = FLASH_BASE | 0x3000; +#endif + HAL_Init( ); + + SystemClockConfig( ); + + UartMcuInit(&Uart1, UART_1, UART_TX, UART_RX); + UartMcuConfig(&Uart1, RX_TX, 115200, + UART_8_BIT, + UART_1_STOP_BIT, + NO_PARITY, + NO_FLOW_CTRL); + RtcInit( ); + + BoardUnusedIoInit( ); + } + else + { + SystemClockReConfig( ); + } + + AdcInit( &Adc, BAT_LEVEL_PIN ); + + SpiInit( &SX1276.Spi, RADIO_MOSI, RADIO_MISO, RADIO_SCLK, NC ); + SX1276IoInit( ); + GpioInit( &SX1276.Xtal, RADIO_XTAL_EN, PIN_OUTPUT, PIN_PUSH_PULL, PIN_NO_PULL, 1 ); + + if( McuInitialized == false ) + { + McuInitialized = true; + if( GetBoardPowerSource( ) == BATTERY_POWER ) + { + CalibrateSystemWakeupTime( ); + } + } +} + +void BoardDeInitMcu( void ) +{ + //Gpio_t ioPin; + + AdcDeInit( &Adc ); + + SpiDeInit( &SX1276.Spi ); + SX1276IoDeInit( ); + + //GpioInit( &ioPin, OSC_LSE_IN, PIN_INPUT, PIN_PUSH_PULL, PIN_NO_PULL, 0 ); + //GpioInit( &ioPin, OSC_LSE_OUT, PIN_INPUT, PIN_PUSH_PULL, PIN_NO_PULL, 0 ); + + GpioWrite( &SX1276.Xtal, 0 ); +} + +uint32_t BoardGetRandomSeed( void ) +{ + return ( ( *( uint32_t* )ID1 ) ^ ( *( uint32_t* )ID2 ) ^ ( *( uint32_t* )ID3 ) ); +} + +void BoardGetUniqueId( uint8_t *id ) +{ + id[7] = ( ( *( uint32_t* )ID1 )+ ( *( uint32_t* )ID3 ) ) >> 24; + id[6] = ( ( *( uint32_t* )ID1 )+ ( *( uint32_t* )ID3 ) ) >> 16; + id[5] = ( ( *( uint32_t* )ID1 )+ ( *( uint32_t* )ID3 ) ) >> 8; + id[4] = ( ( *( uint32_t* )ID1 )+ ( *( uint32_t* )ID3 ) ); + id[3] = ( ( *( uint32_t* )ID2 ) ) >> 24; + id[2] = ( ( *( uint32_t* )ID2 ) ) >> 16; + id[1] = ( ( *( uint32_t* )ID2 ) ) >> 8; + id[0] = ( ( *( uint32_t* )ID2 ) ); +} + +/*! + * Factory power supply + */ +#define FACTORY_POWER_SUPPLY 3300 // mV + +/*! + * VREF calibration value + */ +#define VREFINT_CAL ( *( uint16_t* )0x1FF80078 ) + +/*! + * ADC maximum value + */ +#define ADC_MAX_VALUE 4095 + +/*! + * Battery thresholds + */ +#define BATTERY_MAX_LEVEL 4150 // mV +#define BATTERY_MIN_LEVEL 3200 // mV +#define BATTERY_SHUTDOWN_LEVEL 3100 // mV + +static uint16_t BatteryVoltage = BATTERY_MAX_LEVEL; + +uint16_t BoardBatteryMeasureVolage( void ) +{ + uint16_t vdd = 0; + uint16_t vref = VREFINT_CAL; + uint16_t vdiv = 0; + uint16_t batteryVoltage = 0; + + vdiv = AdcReadChannel( &Adc, BAT_LEVEL_CHANNEL ); + //vref = AdcReadChannel( &Adc, ADC_CHANNEL_VREFINT ); + + vdd = ( float )FACTORY_POWER_SUPPLY * ( float )VREFINT_CAL / ( float )vref; + batteryVoltage = vdd * ( ( float )vdiv / ( float )ADC_MAX_VALUE ); + + // vDiv + // Divider bridge VBAT <-> 100k -<--|-->- 150k <-> GND => vBat = (5 * vDiv )/3 + batteryVoltage = (5 * batteryVoltage )/3; + return batteryVoltage; +} + +uint32_t BoardGetBatteryVoltage( void ) +{ + return BatteryVoltage; +} + +uint8_t BoardGetBatteryLevel( void ) +{ + uint8_t batteryLevel = 0; + + BatteryVoltage = BoardBatteryMeasureVolage( ); + + if( GetBoardPowerSource( ) == USB_POWER ) + { + batteryLevel = 0; + } + else + { + if( BatteryVoltage >= BATTERY_MAX_LEVEL ) + { + batteryLevel = 254; + } + else if( ( BatteryVoltage > BATTERY_MIN_LEVEL ) && ( BatteryVoltage < BATTERY_MAX_LEVEL ) ) + { + batteryLevel = ( ( 253 * ( BatteryVoltage - BATTERY_MIN_LEVEL ) ) / ( BATTERY_MAX_LEVEL - BATTERY_MIN_LEVEL ) ) + 1; + } + else if( ( BatteryVoltage > BATTERY_SHUTDOWN_LEVEL ) && ( BatteryVoltage <= BATTERY_MIN_LEVEL ) ) + { + batteryLevel = 1; + } + else //if( BatteryVoltage <= BATTERY_SHUTDOWN_LEVEL ) + { + batteryLevel = 255; + //GpioInit( &DcDcEnable, DC_DC_EN, PIN_OUTPUT, PIN_PUSH_PULL, PIN_NO_PULL, 0 ); + //GpioInit( &BoardPowerDown, BOARD_POWER_DOWN, PIN_OUTPUT, PIN_PUSH_PULL, PIN_NO_PULL, 1 ); + } + } + return batteryLevel; +} + +static void BoardUnusedIoInit( void ) +{ + +#if defined( USE_DEBUGGER ) + HAL_DBGMCU_EnableDBGStopMode( ); + HAL_DBGMCU_EnableDBGSleepMode( ); + HAL_DBGMCU_EnableDBGStandbyMode( ); +#else + HAL_DBGMCU_DisableDBGSleepMode( ); + HAL_DBGMCU_DisableDBGStopMode( ); + HAL_DBGMCU_DisableDBGStandbyMode( ); + + GpioInit( &ioPin, SWDIO, PIN_ANALOGIC, PIN_PUSH_PULL, PIN_NO_PULL, 0 ); + GpioInit( &ioPin, SWCLK, PIN_ANALOGIC, PIN_PUSH_PULL, PIN_NO_PULL, 0 ); +#endif +} + +void SystemClockConfig( void ) +{ + RCC_OscInitTypeDef RCC_OscInitStruct; + RCC_ClkInitTypeDef RCC_ClkInitStruct; + RCC_PeriphCLKInitTypeDef PeriphClkInit; + + __HAL_RCC_PWR_CLK_ENABLE( ); + + __HAL_PWR_VOLTAGESCALING_CONFIG( PWR_REGULATOR_VOLTAGE_SCALE2 ); + + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI|RCC_OSCILLATORTYPE_LSE; + RCC_OscInitStruct.HSIState = RCC_HSI_ON; + RCC_OscInitStruct.LSEState = RCC_LSE_ON; + RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_OFF; +// RCC_OscInitStruct.MSIClockRange = RCC_MSIRANGE_6; +// RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI; +// RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL8; +// RCC_OscInitStruct.PLL.PLLDIV = RCC_PLL_DIV3; + HAL_RCC_OscConfig( &RCC_OscInitStruct ); + + RCC_ClkInitStruct.ClockType = ( RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2 ); + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_HSI; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; + HAL_RCC_ClockConfig( &RCC_ClkInitStruct, FLASH_LATENCY_1 ); + + PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_RTC; + PeriphClkInit.RTCClockSelection = RCC_RTCCLKSOURCE_LSE; + HAL_RCCEx_PeriphCLKConfig( &PeriphClkInit ); + + HAL_SYSTICK_Config( HAL_RCC_GetHCLKFreq( ) / 1000 ); + + HAL_SYSTICK_CLKSourceConfig( SYSTICK_CLKSOURCE_HCLK ); + + /* HAL_NVIC_GetPriorityGrouping*/ + HAL_NVIC_SetPriorityGrouping( NVIC_PRIORITYGROUP_4 ); + + /* SysTick_IRQn interrupt configuration */ + HAL_NVIC_SetPriority( SysTick_IRQn, 0, 0 ); +} + +void CalibrateSystemWakeupTime( void ) +{ + if( SystemWakeupTimeCalibrated == false ) + { + TimerInit( &CalibrateSystemWakeupTimeTimer, OnCalibrateSystemWakeupTimeTimerEvent ); + TimerSetValue( &CalibrateSystemWakeupTimeTimer, 1000 ); + TimerStart( &CalibrateSystemWakeupTimeTimer ); + while( SystemWakeupTimeCalibrated == false ) + { + TimerLowPowerHandler( ); + } + } +} + +void SystemClockReConfig( void ) +{ + __HAL_RCC_PWR_CLK_ENABLE( ); + __HAL_PWR_VOLTAGESCALING_CONFIG( PWR_REGULATOR_VOLTAGE_SCALE2 ); + + /* Enable HSI */ + __HAL_RCC_HSI_ENABLE(); + /* Wait till HSE is ready */ + while( __HAL_RCC_GET_FLAG( RCC_FLAG_HSIRDY ) == RESET ) + { + } + + /* Select HSI as system clock source */ + __HAL_RCC_SYSCLK_CONFIG ( RCC_SYSCLKSOURCE_HSI ); + + /* Wait till HSI is used as system clock source */ + while( __HAL_RCC_GET_SYSCLK_SOURCE( ) != RCC_SYSCLKSOURCE_STATUS_HSI ) + { + } +} + +void SysTick_Handler( void ) +{ + HAL_IncTick( ); + HAL_SYSTICK_IRQHandler( ); +} + +uint8_t GetBoardPowerSource( void ) +{ + return USB_POWER; // USB_POWER BATTERY_POWER +} + +#ifdef USE_FULL_ASSERT +/* + * Function Name : assert_failed + * Description : Reports the name of the source file and the source line number + * where the assert_param error has occurred. + * Input : - file: pointer to the source file name + * - line: assert_param error line source number + * Output : None + * Return : None + */ +void assert_failed( uint8_t* file, uint32_t line ) +{ + /* User can add his own implementation to report the file name and line number, + ex: printf("Wrong parameters value: file %s on line %u\r\n", file, line) */ + + printf( "Wrong parameters value: file %s on line %u\r\n", ( const char* )file, line ); + /* Infinite loop */ + while( 1 ) + { + } +} +#endif diff --git a/src/RAK811BreakBoard/board.h b/src/RAK811BreakBoard/board.h new file mode 100755 index 0000000..19e96a1 --- /dev/null +++ b/src/RAK811BreakBoard/board.h @@ -0,0 +1,225 @@ +/* + / _____) _ | | +( (____ _____ ____ _| |_ _____ ____| |__ + \____ \| ___ | (_ _) ___ |/ ___) _ \ + _____) ) ____| | | || |_| ____( (___| | | | +(______/|_____)_|_|_| \__)_____)\____)_| |_| + (C)2013 Semtech + +Description: Target board general functions implementation + +License: Revised BSD License, see LICENSE.TXT file include in the project + +Maintainer: Miguel Luis and Gregory Cristian +*/ +#ifndef __BOARD_H__ +#define __BOARD_H__ + +#include +#include +#include +#include +#include +#include "stm32l1xx.h" +#include "stm32l1xx_hal.h" +#include "utilities.h" +#include "timer.h" +#include "delay.h" +#include "gpio.h" +#include "adc.h" +#include "spi.h" +#include "i2c.h" +#include "uart.h" +#include "radio.h" +#include "sx1276/sx1276.h" +#include "gps.h" +#include "lis3dh.h" +#include "gps-board.h" +#include "rtc-board.h" +#include "sx1276-board.h" +#include "uart-board.h" + +#if defined( USE_USB_CDC ) +#include "uart-usb-board.h" +#endif + +#ifdef LORAWAN_DEBUGGER + +#define DPRINTF(...) printf(__VA_ARGS__) +#else +#define DPRINTF(...) + +#endif + +/*! + * Define indicating if an external IO expander is to be used + */ +//#define BOARD_IOE_EXT + +/*! + * Generic definition + */ +#ifndef SUCCESS +#define SUCCESS 1 +#endif + +#ifndef FAIL +#define FAIL 0 +#endif + +/*! + * Board IO pins definitions + */ + +#define LED_1 PA_12 +#define LED_2 PB_4 + +/*! + * Board MCU pins definitions + */ + +#define RADIO_RESET PB_13 +#define RADIO_XTAL_EN PH_1 + +#define RADIO_MOSI PA_7 +#define RADIO_MISO PA_6 +#define RADIO_SCLK PA_5 +#define RADIO_NSS PB_0 + +#define RADIO_DIO_0 PA_11 +#define RADIO_DIO_1 PB_1 +#define RADIO_DIO_2 PA_3 +#define RADIO_DIO_3 PH_0 +#define RADIO_DIO_4 PC_13 + +#define RADIO_RF_CRX_RX PB_6 //CRF3 +#define RADIO_RF_CBT_HF PB_7 //CRF2 HF +#define RADIO_RF_CTX_PA PA_4 //CRF1 PA + +#define OSC_LSE_IN PC_14 +#define OSC_LSE_OUT PC_15 + +#define OSC_HSE_IN PH_0 +#define OSC_HSE_OUT PH_1 + +//#define USB_DM PA_11 +//#define USB_DP PA_12 + +#define I2C_SCL PB_8 +#define I2C_SDA PB_9 +#define LIS3DH_INT1_PIN PB_14 +#define LIS3DH_INT2_PIN PB_15 + +#define UART_TX PA_9 +#define UART_RX PA_10 + +#define GPS_UART UART_3 +#define GPS_POWER_ON_PIN PA_15 +#define GPS_UART_TX PB_10 +#define GPS_UART_RX PB_11 +#define GPS_PPS_PIN PA_0 + +#define BAT_LEVEL_PIN PA_2 +#define BAT_LEVEL_CHANNEL ADC_CHANNEL_2 + +#define SWDIO PA_13 +#define SWCLK PA_14 + + +/*! + * LED GPIO pins objects + */ +extern Gpio_t Led1; +extern Gpio_t Led2; + +/*! + * MCU objects + */ +extern Adc_t Adc; +extern I2c_t I2c; +extern Uart_t Uart1; +extern Uart_t GpsUart; +#if defined( USE_USB_CDC ) +extern Uart_t UartUsb; +#endif + +/*! + * Possible power sources + */ +enum BoardPowerSources +{ + USB_POWER = 0, + BATTERY_POWER, +}; + +/*! + * \brief Disable interrupts + * + * \remark IRQ nesting is managed + */ +void BoardDisableIrq( void ); + +/*! + * \brief Enable interrupts + * + * \remark IRQ nesting is managed + */ +void BoardEnableIrq( void ); + +/*! + * \brief Initializes the target board peripherals. + */ +void BoardInitMcu( void ); + +/*! + * \brief Initializes the boards peripherals. + */ +void BoardInitPeriph( void ); + +/*! + * \brief De-initializes the target board peripherals to decrease power + * consumption. + */ +void BoardDeInitMcu( void ); + +/*! + * \brief Measure the Battery voltage + * + * \retval value battery voltage in volts + */ +uint32_t BoardGetBatteryVoltage( void ); +uint16_t BoardBatteryMeasureVolage( void ); + +/*! + * \brief Get the current battery level + * + * \retval value battery level [ 0: USB, + * 1: Min level, + * x: level + * 254: fully charged, + * 255: Error] + */ +uint8_t BoardGetBatteryLevel( void ); + +/*! + * Returns a pseudo random seed generated using the MCU Unique ID + * + * \retval seed Generated pseudo random seed + */ +uint32_t BoardGetRandomSeed( void ); + +/*! + * \brief Gets the board 64 bits unique ID + * + * \param [IN] id Pointer to an array that will contain the Unique ID + */ +void BoardGetUniqueId( uint8_t *id ); + +/*! + * \brief Get the board power source + * + * \retval value power source [0: USB_POWER, 1: BATTERY_POWER] + */ +uint8_t GetBoardPowerSource( void ); + +#endif // __BOARD_H__ diff --git a/src/RAK811BreakBoard/cmsis/mxconstants.h b/src/RAK811BreakBoard/cmsis/mxconstants.h new file mode 100755 index 0000000..001f131 --- /dev/null +++ b/src/RAK811BreakBoard/cmsis/mxconstants.h @@ -0,0 +1,57 @@ +/** + ****************************************************************************** + * File Name : mxconstants.h + * Description : This file contains the common defines of the application + ****************************************************************************** + * + * COPYRIGHT(c) 2016 STMicroelectronics + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __MXCONSTANT_H +#define __MXCONSTANT_H + /* Includes ------------------------------------------------------------------*/ + +/* USER CODE BEGIN Includes */ + +/* USER CODE END Includes */ + +/* Private define ------------------------------------------------------------*/ + +/* USER CODE BEGIN Private defines */ + +/* USER CODE END Private defines */ + +/** + * @} + */ + +/** + * @} +*/ + +#endif /* __MXCONSTANT_H */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/RAK811BreakBoard/cmsis/stm32l151xb.h b/src/RAK811BreakBoard/cmsis/stm32l151xb.h new file mode 100755 index 0000000..bc20d2d --- /dev/null +++ b/src/RAK811BreakBoard/cmsis/stm32l151xb.h @@ -0,0 +1,8080 @@ +/** + ****************************************************************************** + * @file stm32l151xb.h + * @author MCD Application Team + * @version V2.2.0 + * @date 01-July-2016 + * @brief CMSIS Cortex-M3 Device Peripheral Access Layer Header File. + * This file contains all the peripheral register's definitions, bits + * definitions and memory mapping for STM32L1xx devices. + * + * This file contains: + * - Data structures and the address mapping for all peripherals + * - Peripheral's registers declarations and bits definition + * - Macros to access peripheral’s registers hardware + * + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32l151xb + * @{ + */ + +#ifndef __STM32L151xB_H +#define __STM32L151xB_H + +#ifdef __cplusplus + extern "C" { +#endif + + + /** @addtogroup Configuration_section_for_CMSIS + * @{ + */ +/** + * @brief Configuration of the Cortex-M3 Processor and Core Peripherals + */ +#define __CM3_REV 0x200U /*!< Cortex-M3 Revision r2p0 */ +#define __MPU_PRESENT 1U /*!< STM32L1xx provides MPU */ +#define __NVIC_PRIO_BITS 4U /*!< STM32L1xx uses 4 Bits for the Priority Levels */ +#define __Vendor_SysTickConfig 0U /*!< Set to 1 if different SysTick Config is used */ + +/** + * @} + */ + +/** @addtogroup Peripheral_interrupt_number_definition + * @{ + */ + +/** + * @brief STM32L1xx Interrupt Number Definition, according to the selected device + * in @ref Library_configuration_section + */ + + /*!< Interrupt Number Definition */ +typedef enum +{ +/****** Cortex-M3 Processor Exceptions Numbers ******************************************************/ + NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */ + HardFault_IRQn = -13, /*!< 3 Cortex-M3 Hard Fault Interrupt */ + MemoryManagement_IRQn = -12, /*!< 4 Cortex-M3 Memory Management Interrupt */ + BusFault_IRQn = -11, /*!< 5 Cortex-M3 Bus Fault Interrupt */ + UsageFault_IRQn = -10, /*!< 6 Cortex-M3 Usage Fault Interrupt */ + SVC_IRQn = -5, /*!< 11 Cortex-M3 SV Call Interrupt */ + DebugMonitor_IRQn = -4, /*!< 12 Cortex-M3 Debug Monitor Interrupt */ + PendSV_IRQn = -2, /*!< 14 Cortex-M3 Pend SV Interrupt */ + SysTick_IRQn = -1, /*!< 15 Cortex-M3 System Tick Interrupt */ + +/****** STM32L specific Interrupt Numbers ***********************************************************/ + WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */ + PVD_IRQn = 1, /*!< PVD through EXTI Line detection Interrupt */ + TAMPER_STAMP_IRQn = 2, /*!< Tamper and TimeStamp interrupts through the EXTI line */ + RTC_WKUP_IRQn = 3, /*!< RTC Wakeup Timer through EXTI Line Interrupt */ + FLASH_IRQn = 4, /*!< FLASH global Interrupt */ + RCC_IRQn = 5, /*!< RCC global Interrupt */ + EXTI0_IRQn = 6, /*!< EXTI Line0 Interrupt */ + EXTI1_IRQn = 7, /*!< EXTI Line1 Interrupt */ + EXTI2_IRQn = 8, /*!< EXTI Line2 Interrupt */ + EXTI3_IRQn = 9, /*!< EXTI Line3 Interrupt */ + EXTI4_IRQn = 10, /*!< EXTI Line4 Interrupt */ + DMA1_Channel1_IRQn = 11, /*!< DMA1 Channel 1 global Interrupt */ + DMA1_Channel2_IRQn = 12, /*!< DMA1 Channel 2 global Interrupt */ + DMA1_Channel3_IRQn = 13, /*!< DMA1 Channel 3 global Interrupt */ + DMA1_Channel4_IRQn = 14, /*!< DMA1 Channel 4 global Interrupt */ + DMA1_Channel5_IRQn = 15, /*!< DMA1 Channel 5 global Interrupt */ + DMA1_Channel6_IRQn = 16, /*!< DMA1 Channel 6 global Interrupt */ + DMA1_Channel7_IRQn = 17, /*!< DMA1 Channel 7 global Interrupt */ + ADC1_IRQn = 18, /*!< ADC1 global Interrupt */ + USB_HP_IRQn = 19, /*!< USB High Priority Interrupt */ + USB_LP_IRQn = 20, /*!< USB Low Priority Interrupt */ + DAC_IRQn = 21, /*!< DAC Interrupt */ + COMP_IRQn = 22, /*!< Comparator through EXTI Line Interrupt */ + EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ + TIM9_IRQn = 25, /*!< TIM9 global Interrupt */ + TIM10_IRQn = 26, /*!< TIM10 global Interrupt */ + TIM11_IRQn = 27, /*!< TIM11 global Interrupt */ + TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ + TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ + TIM4_IRQn = 30, /*!< TIM4 global Interrupt */ + I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ + I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ + I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */ + I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */ + SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ + SPI2_IRQn = 36, /*!< SPI2 global Interrupt */ + USART1_IRQn = 37, /*!< USART1 global Interrupt */ + USART2_IRQn = 38, /*!< USART2 global Interrupt */ + USART3_IRQn = 39, /*!< USART3 global Interrupt */ + EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ + RTC_Alarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */ + USB_FS_WKUP_IRQn = 42, /*!< USB FS WakeUp from suspend through EXTI Line Interrupt */ + TIM6_IRQn = 43, /*!< TIM6 global Interrupt */ + TIM7_IRQn = 44, /*!< TIM7 global Interrupt */ +} IRQn_Type; + +/** + * @} + */ + +#include "core_cm3.h" +#include "system_stm32l1xx.h" +#include + +/** @addtogroup Peripheral_registers_structures + * @{ + */ + +/** + * @brief Analog to Digital Converter + */ + +typedef struct +{ + __IO uint32_t SR; /*!< ADC status register, Address offset: 0x00 */ + __IO uint32_t CR1; /*!< ADC control register 1, Address offset: 0x04 */ + __IO uint32_t CR2; /*!< ADC control register 2, Address offset: 0x08 */ + __IO uint32_t SMPR1; /*!< ADC sample time register 1, Address offset: 0x0C */ + __IO uint32_t SMPR2; /*!< ADC sample time register 2, Address offset: 0x10 */ + __IO uint32_t SMPR3; /*!< ADC sample time register 3, Address offset: 0x14 */ + __IO uint32_t JOFR1; /*!< ADC injected channel data offset register 1, Address offset: 0x18 */ + __IO uint32_t JOFR2; /*!< ADC injected channel data offset register 2, Address offset: 0x1C */ + __IO uint32_t JOFR3; /*!< ADC injected channel data offset register 3, Address offset: 0x20 */ + __IO uint32_t JOFR4; /*!< ADC injected channel data offset register 4, Address offset: 0x24 */ + __IO uint32_t HTR; /*!< ADC watchdog higher threshold register, Address offset: 0x28 */ + __IO uint32_t LTR; /*!< ADC watchdog lower threshold register, Address offset: 0x2C */ + __IO uint32_t SQR1; /*!< ADC regular sequence register 1, Address offset: 0x30 */ + __IO uint32_t SQR2; /*!< ADC regular sequence register 2, Address offset: 0x34 */ + __IO uint32_t SQR3; /*!< ADC regular sequence register 3, Address offset: 0x38 */ + __IO uint32_t SQR4; /*!< ADC regular sequence register 4, Address offset: 0x3C */ + __IO uint32_t SQR5; /*!< ADC regular sequence register 5, Address offset: 0x40 */ + __IO uint32_t JSQR; /*!< ADC injected sequence register, Address offset: 0x44 */ + __IO uint32_t JDR1; /*!< ADC injected data register 1, Address offset: 0x48 */ + __IO uint32_t JDR2; /*!< ADC injected data register 2, Address offset: 0x4C */ + __IO uint32_t JDR3; /*!< ADC injected data register 3, Address offset: 0x50 */ + __IO uint32_t JDR4; /*!< ADC injected data register 4, Address offset: 0x54 */ + __IO uint32_t DR; /*!< ADC regular data register, Address offset: 0x58 */ + uint32_t RESERVED; /*!< Reserved, Address offset: 0x5C */ +} ADC_TypeDef; + +typedef struct +{ + __IO uint32_t CSR; /*!< ADC common status register, Address offset: ADC1 base address + 0x300 */ + __IO uint32_t CCR; /*!< ADC common control register, Address offset: ADC1 base address + 0x304 */ +} ADC_Common_TypeDef; + +/** + * @brief Comparator + */ + +typedef struct +{ + __IO uint32_t CSR; /*!< COMP control and status register, Address offset: 0x00 */ +} COMP_TypeDef; + +typedef struct +{ + __IO uint32_t CSR; /*!< COMP control and status register, used for bits common to several COMP instances, Address offset: 0x00 */ +} COMP_Common_TypeDef; + +/** + * @brief CRC calculation unit + */ + +typedef struct +{ + __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */ + __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */ + uint8_t RESERVED0; /*!< Reserved, Address offset: 0x05 */ + uint16_t RESERVED1; /*!< Reserved, Address offset: 0x06 */ + __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */ +} CRC_TypeDef; + +/** + * @brief Digital to Analog Converter + */ + +typedef struct +{ + __IO uint32_t CR; /*!< DAC control register, Address offset: 0x00 */ + __IO uint32_t SWTRIGR; /*!< DAC software trigger register, Address offset: 0x04 */ + __IO uint32_t DHR12R1; /*!< DAC channel1 12-bit right-aligned data holding register, Address offset: 0x08 */ + __IO uint32_t DHR12L1; /*!< DAC channel1 12-bit left aligned data holding register, Address offset: 0x0C */ + __IO uint32_t DHR8R1; /*!< DAC channel1 8-bit right aligned data holding register, Address offset: 0x10 */ + __IO uint32_t DHR12R2; /*!< DAC channel2 12-bit right aligned data holding register, Address offset: 0x14 */ + __IO uint32_t DHR12L2; /*!< DAC channel2 12-bit left aligned data holding register, Address offset: 0x18 */ + __IO uint32_t DHR8R2; /*!< DAC channel2 8-bit right-aligned data holding register, Address offset: 0x1C */ + __IO uint32_t DHR12RD; /*!< Dual DAC 12-bit right-aligned data holding register, Address offset: 0x20 */ + __IO uint32_t DHR12LD; /*!< DUAL DAC 12-bit left aligned data holding register, Address offset: 0x24 */ + __IO uint32_t DHR8RD; /*!< DUAL DAC 8-bit right aligned data holding register, Address offset: 0x28 */ + __IO uint32_t DOR1; /*!< DAC channel1 data output register, Address offset: 0x2C */ + __IO uint32_t DOR2; /*!< DAC channel2 data output register, Address offset: 0x30 */ + __IO uint32_t SR; /*!< DAC status register, Address offset: 0x34 */ +} DAC_TypeDef; + +/** + * @brief Debug MCU + */ + +typedef struct +{ + __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */ + __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */ + __IO uint32_t APB1FZ; /*!< Debug MCU APB1 freeze register, Address offset: 0x08 */ + __IO uint32_t APB2FZ; /*!< Debug MCU APB2 freeze register, Address offset: 0x0C */ +}DBGMCU_TypeDef; + +/** + * @brief DMA Controller + */ + +typedef struct +{ + __IO uint32_t CCR; /*!< DMA channel x configuration register */ + __IO uint32_t CNDTR; /*!< DMA channel x number of data register */ + __IO uint32_t CPAR; /*!< DMA channel x peripheral address register */ + __IO uint32_t CMAR; /*!< DMA channel x memory address register */ +} DMA_Channel_TypeDef; + +typedef struct +{ + __IO uint32_t ISR; /*!< DMA interrupt status register, Address offset: 0x00 */ + __IO uint32_t IFCR; /*!< DMA interrupt flag clear register, Address offset: 0x04 */ +} DMA_TypeDef; + +/** + * @brief External Interrupt/Event Controller + */ + +typedef struct +{ + __IO uint32_t IMR; /*!
© COPYRIGHT(c) 2015 STMicroelectronics
+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32l151xba + * @{ + */ + +#ifndef __STM32L151xBA_H +#define __STM32L151xBA_H + +#ifdef __cplusplus + extern "C" { +#endif + + + /** @addtogroup Configuration_section_for_CMSIS + * @{ + */ +/** + * @brief Configuration of the Cortex-M3 Processor and Core Peripherals + */ +#define __CM3_REV 0x200 /*!< Cortex-M3 Revision r2p0 */ +#define __MPU_PRESENT 1 /*!< STM32L1xx provides MPU */ +#define __NVIC_PRIO_BITS 4 /*!< STM32L1xx uses 4 Bits for the Priority Levels */ +#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */ + +/** + * @} + */ + +/** @addtogroup Peripheral_interrupt_number_definition + * @{ + */ + +/** + * @brief STM32L1xx Interrupt Number Definition, according to the selected device + * in @ref Library_configuration_section + */ + + /*!< Interrupt Number Definition */ +typedef enum +{ +/****** Cortex-M3 Processor Exceptions Numbers ******************************************************/ + NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */ + MemoryManagement_IRQn = -12, /*!< 4 Cortex-M3 Memory Management Interrupt */ + BusFault_IRQn = -11, /*!< 5 Cortex-M3 Bus Fault Interrupt */ + UsageFault_IRQn = -10, /*!< 6 Cortex-M3 Usage Fault Interrupt */ + SVC_IRQn = -5, /*!< 11 Cortex-M3 SV Call Interrupt */ + DebugMonitor_IRQn = -4, /*!< 12 Cortex-M3 Debug Monitor Interrupt */ + PendSV_IRQn = -2, /*!< 14 Cortex-M3 Pend SV Interrupt */ + SysTick_IRQn = -1, /*!< 15 Cortex-M3 System Tick Interrupt */ + +/****** STM32L specific Interrupt Numbers ***********************************************************/ + WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */ + PVD_IRQn = 1, /*!< PVD through EXTI Line detection Interrupt */ + TAMPER_STAMP_IRQn = 2, /*!< Tamper and TimeStamp interrupts through the EXTI line */ + RTC_WKUP_IRQn = 3, /*!< RTC Wakeup Timer through EXTI Line Interrupt */ + FLASH_IRQn = 4, /*!< FLASH global Interrupt */ + RCC_IRQn = 5, /*!< RCC global Interrupt */ + EXTI0_IRQn = 6, /*!< EXTI Line0 Interrupt */ + EXTI1_IRQn = 7, /*!< EXTI Line1 Interrupt */ + EXTI2_IRQn = 8, /*!< EXTI Line2 Interrupt */ + EXTI3_IRQn = 9, /*!< EXTI Line3 Interrupt */ + EXTI4_IRQn = 10, /*!< EXTI Line4 Interrupt */ + DMA1_Channel1_IRQn = 11, /*!< DMA1 Channel 1 global Interrupt */ + DMA1_Channel2_IRQn = 12, /*!< DMA1 Channel 2 global Interrupt */ + DMA1_Channel3_IRQn = 13, /*!< DMA1 Channel 3 global Interrupt */ + DMA1_Channel4_IRQn = 14, /*!< DMA1 Channel 4 global Interrupt */ + DMA1_Channel5_IRQn = 15, /*!< DMA1 Channel 5 global Interrupt */ + DMA1_Channel6_IRQn = 16, /*!< DMA1 Channel 6 global Interrupt */ + DMA1_Channel7_IRQn = 17, /*!< DMA1 Channel 7 global Interrupt */ + ADC1_IRQn = 18, /*!< ADC1 global Interrupt */ + USB_HP_IRQn = 19, /*!< USB High Priority Interrupt */ + USB_LP_IRQn = 20, /*!< USB Low Priority Interrupt */ + DAC_IRQn = 21, /*!< DAC Interrupt */ + COMP_IRQn = 22, /*!< Comparator through EXTI Line Interrupt */ + EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ + TIM9_IRQn = 25, /*!< TIM9 global Interrupt */ + TIM10_IRQn = 26, /*!< TIM10 global Interrupt */ + TIM11_IRQn = 27, /*!< TIM11 global Interrupt */ + TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ + TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ + TIM4_IRQn = 30, /*!< TIM4 global Interrupt */ + I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ + I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ + I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */ + I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */ + SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ + SPI2_IRQn = 36, /*!< SPI2 global Interrupt */ + USART1_IRQn = 37, /*!< USART1 global Interrupt */ + USART2_IRQn = 38, /*!< USART2 global Interrupt */ + USART3_IRQn = 39, /*!< USART3 global Interrupt */ + EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ + RTC_Alarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */ + USB_FS_WKUP_IRQn = 42, /*!< USB FS WakeUp from suspend through EXTI Line Interrupt */ + TIM6_IRQn = 43, /*!< TIM6 global Interrupt */ + TIM7_IRQn = 44, /*!< TIM7 global Interrupt */ +} IRQn_Type; + +/** + * @} + */ + +#include "core_cm3.h" +#include "system_stm32l1xx.h" +#include + +/** @addtogroup Peripheral_registers_structures + * @{ + */ + +/** + * @brief Analog to Digital Converter + */ + +typedef struct +{ + __IO uint32_t SR; /*!< ADC status register, Address offset: 0x00 */ + __IO uint32_t CR1; /*!< ADC control register 1, Address offset: 0x04 */ + __IO uint32_t CR2; /*!< ADC control register 2, Address offset: 0x08 */ + __IO uint32_t SMPR1; /*!< ADC sample time register 1, Address offset: 0x0C */ + __IO uint32_t SMPR2; /*!< ADC sample time register 2, Address offset: 0x10 */ + __IO uint32_t SMPR3; /*!< ADC sample time register 3, Address offset: 0x14 */ + __IO uint32_t JOFR1; /*!< ADC injected channel data offset register 1, Address offset: 0x18 */ + __IO uint32_t JOFR2; /*!< ADC injected channel data offset register 2, Address offset: 0x1C */ + __IO uint32_t JOFR3; /*!< ADC injected channel data offset register 3, Address offset: 0x20 */ + __IO uint32_t JOFR4; /*!< ADC injected channel data offset register 4, Address offset: 0x24 */ + __IO uint32_t HTR; /*!< ADC watchdog higher threshold register, Address offset: 0x28 */ + __IO uint32_t LTR; /*!< ADC watchdog lower threshold register, Address offset: 0x2C */ + __IO uint32_t SQR1; /*!< ADC regular sequence register 1, Address offset: 0x30 */ + __IO uint32_t SQR2; /*!< ADC regular sequence register 2, Address offset: 0x34 */ + __IO uint32_t SQR3; /*!< ADC regular sequence register 3, Address offset: 0x38 */ + __IO uint32_t SQR4; /*!< ADC regular sequence register 4, Address offset: 0x3C */ + __IO uint32_t SQR5; /*!< ADC regular sequence register 5, Address offset: 0x40 */ + __IO uint32_t JSQR; /*!< ADC injected sequence register, Address offset: 0x44 */ + __IO uint32_t JDR1; /*!< ADC injected data register 1, Address offset: 0x48 */ + __IO uint32_t JDR2; /*!< ADC injected data register 2, Address offset: 0x4C */ + __IO uint32_t JDR3; /*!< ADC injected data register 3, Address offset: 0x50 */ + __IO uint32_t JDR4; /*!< ADC injected data register 4, Address offset: 0x54 */ + __IO uint32_t DR; /*!< ADC regular data register, Address offset: 0x58 */ + uint32_t RESERVED; /*!< Reserved, Address offset: 0x5C */ +} ADC_TypeDef; + +typedef struct +{ + __IO uint32_t CSR; /*!< ADC common status register, Address offset: ADC1 base address + 0x300 */ + __IO uint32_t CCR; /*!< ADC common control register, Address offset: ADC1 base address + 0x304 */ +} ADC_Common_TypeDef; + +/** + * @brief Comparator + */ + +typedef struct +{ + __IO uint32_t CSR; /*!< COMP comparator control and status register, Address offset: 0x00 */ +} COMP_TypeDef; + +/** + * @brief CRC calculation unit + */ + +typedef struct +{ + __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */ + __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */ + uint8_t RESERVED0; /*!< Reserved, Address offset: 0x05 */ + uint16_t RESERVED1; /*!< Reserved, Address offset: 0x06 */ + __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */ +} CRC_TypeDef; + +/** + * @brief Digital to Analog Converter + */ + +typedef struct +{ + __IO uint32_t CR; /*!< DAC control register, Address offset: 0x00 */ + __IO uint32_t SWTRIGR; /*!< DAC software trigger register, Address offset: 0x04 */ + __IO uint32_t DHR12R1; /*!< DAC channel1 12-bit right-aligned data holding register, Address offset: 0x08 */ + __IO uint32_t DHR12L1; /*!< DAC channel1 12-bit left aligned data holding register, Address offset: 0x0C */ + __IO uint32_t DHR8R1; /*!< DAC channel1 8-bit right aligned data holding register, Address offset: 0x10 */ + __IO uint32_t DHR12R2; /*!< DAC channel2 12-bit right aligned data holding register, Address offset: 0x14 */ + __IO uint32_t DHR12L2; /*!< DAC channel2 12-bit left aligned data holding register, Address offset: 0x18 */ + __IO uint32_t DHR8R2; /*!< DAC channel2 8-bit right-aligned data holding register, Address offset: 0x1C */ + __IO uint32_t DHR12RD; /*!< Dual DAC 12-bit right-aligned data holding register, Address offset: 0x20 */ + __IO uint32_t DHR12LD; /*!< DUAL DAC 12-bit left aligned data holding register, Address offset: 0x24 */ + __IO uint32_t DHR8RD; /*!< DUAL DAC 8-bit right aligned data holding register, Address offset: 0x28 */ + __IO uint32_t DOR1; /*!< DAC channel1 data output register, Address offset: 0x2C */ + __IO uint32_t DOR2; /*!< DAC channel2 data output register, Address offset: 0x30 */ + __IO uint32_t SR; /*!< DAC status register, Address offset: 0x34 */ +} DAC_TypeDef; + +/** + * @brief Debug MCU + */ + +typedef struct +{ + __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */ + __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */ + __IO uint32_t APB1FZ; /*!< Debug MCU APB1 freeze register, Address offset: 0x08 */ + __IO uint32_t APB2FZ; /*!< Debug MCU APB2 freeze register, Address offset: 0x0C */ +}DBGMCU_TypeDef; + +/** + * @brief DMA Controller + */ + +typedef struct +{ + __IO uint32_t CCR; /*!< DMA channel x configuration register */ + __IO uint32_t CNDTR; /*!< DMA channel x number of data register */ + __IO uint32_t CPAR; /*!< DMA channel x peripheral address register */ + __IO uint32_t CMAR; /*!< DMA channel x memory address register */ +} DMA_Channel_TypeDef; + +typedef struct +{ + __IO uint32_t ISR; /*!< DMA interrupt status register, Address offset: 0x00 */ + __IO uint32_t IFCR; /*!< DMA interrupt flag clear register, Address offset: 0x04 */ +} DMA_TypeDef; + +/** + * @brief External Interrupt/Event Controller + */ + +typedef struct +{ + __IO uint32_t IMR; /*!
© COPYRIGHT(c) 2016 STMicroelectronics
+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32l1xx + * @{ + */ + +#ifndef __STM32L1XX_H +#define __STM32L1XX_H + +#ifdef __cplusplus + extern "C" { +#endif /* __cplusplus */ + +/** @addtogroup Library_configuration_section + * @{ + */ + +/** + * @brief STM32 Family + */ +#if !defined (STM32L1) +#define STM32L1 +#endif /* STM32L1 */ + + +/* Uncomment the line below according to the target STM32L device used in your + application + */ + +#if !defined (STM32L100xB) && !defined (STM32L100xBA) && !defined (STM32L100xC) && \ + !defined (STM32L151xB) && !defined (STM32L151xBA) && !defined (STM32L151xC) && !defined (STM32L151xCA) && !defined (STM32L151xD) && !defined (STM32L151xDX) && !defined (STM32L151xE) && \ + !defined (STM32L152xB) && !defined (STM32L152xBA) && !defined (STM32L152xC) && !defined (STM32L152xCA) && !defined (STM32L152xD) && !defined (STM32L152xDX) && !defined (STM32L152xE) && \ + !defined (STM32L162xC) && !defined (STM32L162xCA) && !defined (STM32L162xD) && !defined (STM32L162xDX) && !defined (STM32L162xE) + /* #define STM32L100xB */ /*!< STM32L100C6, STM32L100R and STM32L100RB Devices */ + /* #define STM32L100xBA */ /*!< STM32L100C6-A, STM32L100R8-A and STM32L100RB-A Devices */ + /* #define STM32L100xC */ /*!< STM32L100RC Devices */ + /* #define STM32L151xB */ /*!< STM32L151C6, STM32L151R6, STM32L151C8, STM32L151R8, STM32L151V8, STM32L151CB, STM32L151RB and STM32L151VB */ + /* #define STM32L151xBA */ /*!< STM32L151C6-A, STM32L151R6-A, STM32L151C8-A, STM32L151R8-A, STM32L151V8-A, STM32L151CB-A, STM32L151RB-A and STM32L151VB-A */ + /* #define STM32L151xC */ /*!< STM32L151CC, STM32L151UC, STM32L151RC and STM32L151VC */ + /* #define STM32L151xCA */ /*!< STM32L151RC-A, STM32L151VC-A, STM32L151QC and STM32L151ZC */ + /* #define STM32L151xD */ /*!< STM32L151QD, STM32L151RD, STM32L151VD & STM32L151ZD */ + /* #define STM32L151xDX */ /*!< STM32L151VD-X Devices */ + /* #define STM32L151xE */ /*!< STM32L151QE, STM32L151RE, STM32L151VE and STM32L151ZE */ + /* #define STM32L152xB */ /*!< STM32L152C6, STM32L152R6, STM32L152C8, STM32L152R8, STM32L152V8, STM32L152CB, STM32L152RB and STM32L152VB */ + /* #define STM32L152xBA */ /*!< STM32L152C6-A, STM32L152R6-A, STM32L152C8-A, STM32L152R8-A, STM32L152V8-A, STM32L152CB-A, STM32L152RB-A and STM32L152VB-A */ + /* #define STM32L152xC */ /*!< STM32L152CC, STM32L152UC, STM32L152RC and STM32L152VC */ + /* #define STM32L152xCA */ /*!< STM32L152RC-A, STM32L152VC-A, STM32L152QC and STM32L152ZC */ + /* #define STM32L152xD */ /*!< STM32L152QD, STM32L152RD, STM32L152VD and STM32L152ZD */ + /* #define STM32L152xDX */ /*!< STM32L152VD-X Devices */ + /* #define STM32L152xE */ /*!< STM32L152QE, STM32L152RE, STM32L152VE and STM32L152ZE */ + /* #define STM32L162xC */ /*!< STM32L162RC and STM32L162VC */ + /* #define STM32L162xCA */ /*!< STM32L162RC-A, STM32L162VC-A, STM32L162QC and STM32L162ZC */ + /* #define STM32L162xD */ /*!< STM32L162QD, STM32L162RD, STM32L162VD and STM32L162ZD */ + /* #define STM32L162xDX */ /*!< STM32L162VD-X Devices */ + /* #define STM32L162xE */ /*!< STM32L162RE, STM32L162VE and STM32L162ZE */ +#endif + +/* Tip: To avoid modifying this file each time you need to switch between these + devices, you can define the device in your toolchain compiler preprocessor. + */ + +#if !defined (USE_HAL_DRIVER) +/** + * @brief Comment the line below if you will not use the peripherals drivers. + In this case, these drivers will not be included and the application code will + be based on direct access to peripherals registers + */ + /*#define USE_HAL_DRIVER */ +#endif /* USE_HAL_DRIVER */ + +/** + * @brief CMSIS Device version number + */ +#define __STM32L1xx_CMSIS_VERSION_MAIN (0x02) /*!< [31:24] main version */ +#define __STM32L1xx_CMSIS_VERSION_SUB1 (0x02) /*!< [23:16] sub1 version */ +#define __STM32L1xx_CMSIS_VERSION_SUB2 (0x00) /*!< [15:8] sub2 version */ +#define __STM32L1xx_CMSIS_VERSION_RC (0x00) /*!< [7:0] release candidate */ +#define __STM32L1xx_CMSIS_VERSION ((__STM32L1xx_CMSIS_VERSION_MAIN << 24)\ + |(__STM32L1xx_CMSIS_VERSION_SUB1 << 16)\ + |(__STM32L1xx_CMSIS_VERSION_SUB2 << 8 )\ + |(__STM32L1xx_CMSIS_VERSION_RC)) + +/** + * @} + */ + +/** @addtogroup Device_Included + * @{ + */ + +#if defined(STM32L100xB) + #include "stm32l100xb.h" +#elif defined(STM32L100xBA) + #include "stm32l100xba.h" +#elif defined(STM32L100xC) + #include "stm32l100xc.h" +#elif defined(STM32L151xB) + #include "stm32l151xb.h" +#elif defined(STM32L151xBA) + #include "stm32l151xba.h" +#elif defined(STM32L151xC) + #include "stm32l151xc.h" +#elif defined(STM32L151xCA) + #include "stm32l151xca.h" +#elif defined(STM32L151xD) + #include "stm32l151xd.h" +#elif defined(STM32L151xDX) + #include "stm32l151xdx.h" +#elif defined(STM32L151xE) + #include "stm32l151xe.h" +#elif defined(STM32L152xB) + #include "stm32l152xb.h" +#elif defined(STM32L152xBA) + #include "stm32l152xba.h" +#elif defined(STM32L152xC) + #include "stm32l152xc.h" +#elif defined(STM32L152xCA) + #include "stm32l152xca.h" +#elif defined(STM32L152xD) + #include "stm32l152xd.h" +#elif defined(STM32L152xDX) + #include "stm32l152xdx.h" +#elif defined(STM32L152xE) + #include "stm32l152xe.h" +#elif defined(STM32L162xC) + #include "stm32l162xc.h" +#elif defined(STM32L162xCA) + #include "stm32l162xca.h" +#elif defined(STM32L162xD) + #include "stm32l162xd.h" +#elif defined(STM32L162xDX) + #include "stm32l162xdx.h" +#elif defined(STM32L162xE) + #include "stm32l162xe.h" +#else + #error "Please select first the target STM32L1xx device used in your application (in stm32l1xx.h file)" +#endif + +/** + * @} + */ + +/** @addtogroup Exported_types + * @{ + */ +typedef enum +{ + RESET = 0, + SET = !RESET +} FlagStatus, ITStatus; + +typedef enum +{ + DISABLE = 0, + ENABLE = !DISABLE +} FunctionalState; +#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE)) + +typedef enum +{ + ERROR = 0, + SUCCESS = !ERROR +} ErrorStatus; + +/** + * @} + */ + + +/** @addtogroup Exported_macros + * @{ + */ +#define SET_BIT(REG, BIT) ((REG) |= (BIT)) + +#define CLEAR_BIT(REG, BIT) ((REG) &= ~(BIT)) + +#define READ_BIT(REG, BIT) ((REG) & (BIT)) + +#define CLEAR_REG(REG) ((REG) = (0x0)) + +#define WRITE_REG(REG, VAL) ((REG) = (VAL)) + +#define READ_REG(REG) ((REG)) + +#define MODIFY_REG(REG, CLEARMASK, SETMASK) WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK))) + +#define POSITION_VAL(VAL) (__CLZ(__RBIT(VAL))) + + +/** + * @} + */ + +#if defined (USE_HAL_DRIVER) + #include "stm32l1xx_hal.h" +#endif /* USE_HAL_DRIVER */ + + +#ifdef __cplusplus +} +#endif /* __cplusplus */ + +#endif /* __STM32L1xx_H */ +/** + * @} + */ + +/** + * @} + */ + + + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/RAK811BreakBoard/cmsis/stm32l1xx_hal_conf.h b/src/RAK811BreakBoard/cmsis/stm32l1xx_hal_conf.h new file mode 100755 index 0000000..7759b60 --- /dev/null +++ b/src/RAK811BreakBoard/cmsis/stm32l1xx_hal_conf.h @@ -0,0 +1,287 @@ +/** + ****************************************************************************** + * @file stm32l1xx_hal_conf.h + * @brief HAL configuration file. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L1xx_HAL_CONF_H +#define __STM32L1xx_HAL_CONF_H + +#ifdef __cplusplus + extern "C" { +#endif + +#include "mxconstants.h" + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/* ########################## Module Selection ############################## */ +/** + * @brief This is the list of modules to be used in the HAL driver + */ + +#define HAL_MODULE_ENABLED +#define HAL_ADC_MODULE_ENABLED +//#define HAL_COMP_MODULE_ENABLED +//#define HAL_CRC_MODULE_ENABLED +//#define HAL_CRYP_MODULE_ENABLED +//#define HAL_DAC_MODULE_ENABLED +#define HAL_I2C_MODULE_ENABLED +//#define HAL_I2S_MODULE_ENABLED +//#define HAL_IRDA_MODULE_ENABLED +//#define HAL_IWDG_MODULE_ENABLED +//#define HAL_LCD_MODULE_ENABLED +//#define HAL_NOR_MODULE_ENABLED +//#define HAL_OPAMP_MODULE_ENABLED +#define HAL_PCD_MODULE_ENABLED +#define HAL_RTC_MODULE_ENABLED +//#define HAL_SD_MODULE_ENABLED +//#define HAL_SMARTCARD_MODULE_ENABLED +#define HAL_SPI_MODULE_ENABLED +//#define HAL_SRAM_MODULE_ENABLED +//#define HAL_TIM_MODULE_ENABLED +#define HAL_UART_MODULE_ENABLED +#define HAL_USART_MODULE_ENABLED +//#define HAL_WWDG_MODULE_ENABLED +#define HAL_GPIO_MODULE_ENABLED +#define HAL_DMA_MODULE_ENABLED +#define HAL_RCC_MODULE_ENABLED +#define HAL_FLASH_MODULE_ENABLED +#define HAL_PWR_MODULE_ENABLED +#define HAL_CORTEX_MODULE_ENABLED + +/* ########################## Oscillator Values adaptation ####################*/ +/** + * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSE is used as system clock source, directly or through the PLL). + */ +#if !defined (HSE_VALUE) + #define HSE_VALUE ((uint32_t)12000000) /*!< Value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (HSE_STARTUP_TIMEOUT) + #define HSE_STARTUP_TIMEOUT ((uint32_t)100) /*!< Time out for HSE start up, in ms */ +#endif /* HSE_STARTUP_TIMEOUT */ + +/** + * @brief Internal Multiple Speed oscillator (MSI) default value. + * This value is the default MSI range value after Reset. + */ +#if !defined (MSI_VALUE) + #define MSI_VALUE ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/ +#endif /* MSI_VALUE */ +/** + * @brief Internal High Speed oscillator (HSI) value. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSI is used as system clock source, directly or through the PLL). + */ +#if !defined (HSI_VALUE) + #define HSI_VALUE ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +/** + * @brief External Low Speed oscillator (LSE) value. + * This value is used by the UART, RTC HAL module to compute the system frequency + */ +#if !defined (LSE_VALUE) + #define LSE_VALUE ((uint32_t)32768) /*!< Value of the External oscillator in Hz*/ +#endif /* LSE_VALUE */ + +#if !defined (LSE_STARTUP_TIMEOUT) + #define LSE_STARTUP_TIMEOUT ((uint32_t)5000) /*!< Time out for LSE start up, in ms */ +#endif /* HSE_STARTUP_TIMEOUT */ + +/* Tip: To avoid modifying this file each time you need to use different HSE, + === you can define the HSE value in your toolchain compiler preprocessor. */ + +/* ########################### System Configuration ######################### */ +/** + * @brief This is the HAL system configuration section + */ + +#define VDD_VALUE ((uint32_t)3300) /*!< Value of VDD in mv */ +#define TICK_INT_PRIORITY ((uint32_t)0) /*!< tick interrupt priority */ +#define USE_RTOS 0 +#define PREFETCH_ENABLE 0 +#define INSTRUCTION_CACHE_ENABLE 1 +#define DATA_CACHE_ENABLE 1 + +/* ########################## Assert Selection ############################## */ +/** + * @brief Uncomment the line below to expanse the "assert_param" macro in the + * HAL drivers code + */ +/* #define USE_FULL_ASSERT 1 */ + +/* Includes ------------------------------------------------------------------*/ +/** + * @brief Include module's header file + */ + +#ifdef HAL_RCC_MODULE_ENABLED + #include "stm32l1xx_hal_rcc.h" +#endif /* HAL_RCC_MODULE_ENABLED */ + +#ifdef HAL_GPIO_MODULE_ENABLED + #include "stm32l1xx_hal_gpio.h" +#endif /* HAL_GPIO_MODULE_ENABLED */ + +#ifdef HAL_DMA_MODULE_ENABLED + #include "stm32l1xx_hal_dma.h" +#endif /* HAL_DMA_MODULE_ENABLED */ + +#ifdef HAL_CORTEX_MODULE_ENABLED + #include "stm32l1xx_hal_cortex.h" +#endif /* HAL_CORTEX_MODULE_ENABLED */ + +#ifdef HAL_ADC_MODULE_ENABLED + #include "stm32l1xx_hal_adc.h" +#endif /* HAL_ADC_MODULE_ENABLED */ + +#ifdef HAL_COMP_MODULE_ENABLED + #include "stm32l1xx_hal_comp.h" +#endif /* HAL_COMP_MODULE_ENABLED */ + +#ifdef HAL_CRC_MODULE_ENABLED + #include "stm32l1xx_hal_crc.h" +#endif /* HAL_CRC_MODULE_ENABLED */ + +#ifdef HAL_CRYP_MODULE_ENABLED + #include "stm32l1xx_hal_cryp.h" +#endif /* HAL_CRYP_MODULE_ENABLED */ + +#ifdef HAL_DAC_MODULE_ENABLED + #include "stm32l1xx_hal_dac.h" +#endif /* HAL_DAC_MODULE_ENABLED */ + +#ifdef HAL_FLASH_MODULE_ENABLED + #include "stm32l1xx_hal_flash.h" +#endif /* HAL_FLASH_MODULE_ENABLED */ + +#ifdef HAL_SRAM_MODULE_ENABLED + #include "stm32l1xx_hal_sram.h" +#endif /* HAL_SRAM_MODULE_ENABLED */ + +#ifdef HAL_NOR_MODULE_ENABLED + #include "stm32l1xx_hal_nor.h" +#endif /* HAL_NOR_MODULE_ENABLED */ + +#ifdef HAL_I2C_MODULE_ENABLED + #include "stm32l1xx_hal_i2c.h" +#endif /* HAL_I2C_MODULE_ENABLED */ + +#ifdef HAL_I2S_MODULE_ENABLED + #include "stm32l1xx_hal_i2s.h" +#endif /* HAL_I2S_MODULE_ENABLED */ + +#ifdef HAL_IWDG_MODULE_ENABLED + #include "stm32l1xx_hal_iwdg.h" +#endif /* HAL_IWDG_MODULE_ENABLED */ + +#ifdef HAL_LCD_MODULE_ENABLED + #include "stm32l1xx_hal_lcd.h" +#endif /* HAL_LCD_MODULE_ENABLED */ + +#ifdef HAL_OPAMP_MODULE_ENABLED + #include "stm32l1xx_hal_opamp.h" +#endif /* HAL_OPAMP_MODULE_ENABLED */ + +#ifdef HAL_PWR_MODULE_ENABLED + #include "stm32l1xx_hal_pwr.h" +#endif /* HAL_PWR_MODULE_ENABLED */ + +#ifdef HAL_RTC_MODULE_ENABLED + #include "stm32l1xx_hal_rtc.h" +#endif /* HAL_RTC_MODULE_ENABLED */ + +#ifdef HAL_SD_MODULE_ENABLED + #include "stm32l1xx_hal_sd.h" +#endif /* HAL_SD_MODULE_ENABLED */ + +#ifdef HAL_SPI_MODULE_ENABLED + #include "stm32l1xx_hal_spi.h" +#endif /* HAL_SPI_MODULE_ENABLED */ + +#ifdef HAL_TIM_MODULE_ENABLED + #include "stm32l1xx_hal_tim.h" +#endif /* HAL_TIM_MODULE_ENABLED */ + +#ifdef HAL_UART_MODULE_ENABLED + #include "stm32l1xx_hal_uart.h" +#endif /* HAL_UART_MODULE_ENABLED */ + +#ifdef HAL_USART_MODULE_ENABLED + #include "stm32l1xx_hal_usart.h" +#endif /* HAL_USART_MODULE_ENABLED */ + +#ifdef HAL_IRDA_MODULE_ENABLED + #include "stm32l1xx_hal_irda.h" +#endif /* HAL_IRDA_MODULE_ENABLED */ + +#ifdef HAL_SMARTCARD_MODULE_ENABLED + #include "stm32l1xx_hal_smartcard.h" +#endif /* HAL_SMARTCARD_MODULE_ENABLED */ + +#ifdef HAL_WWDG_MODULE_ENABLED + #include "stm32l1xx_hal_wwdg.h" +#endif /* HAL_WWDG_MODULE_ENABLED */ + +#ifdef HAL_PCD_MODULE_ENABLED + #include "stm32l1xx_hal_pcd.h" +#endif /* HAL_PCD_MODULE_ENABLED */ + +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT +/** + * @brief The assert_param macro is used for function's parameters check. + * @param expr: If expr is false, it calls assert_failed function + * which reports the name of the source file and the source + * line number of the call that failed. + * If expr is true, it returns no value. + * @retval None + */ + #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ + void assert_failed(uint8_t* file, uint32_t line); +#else + #define assert_param(expr) ((void)0) +#endif /* USE_FULL_ASSERT */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32L1xx_HAL_CONF_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/RAK811BreakBoard/cmsis/system_stm32l1xx.c b/src/RAK811BreakBoard/cmsis/system_stm32l1xx.c new file mode 100755 index 0000000..661dc6e --- /dev/null +++ b/src/RAK811BreakBoard/cmsis/system_stm32l1xx.c @@ -0,0 +1,444 @@ +/** + ****************************************************************************** + * @file system_stm32l1xx.c + * @author MCD Application Team + * @version V2.2.0 + * @date 01-July-2016 + * @brief CMSIS Cortex-M3 Device Peripheral Access Layer System Source File. + * + * This file provides two functions and one global variable to be called from + * user application: + * - SystemInit(): This function is called at startup just after reset and + * before branch to main program. This call is made inside + * the "startup_stm32l1xx.s" file. + * + * - SystemCoreClock variable: Contains the core clock (HCLK), it can be used + * by the user application to setup the SysTick + * timer or configure other parameters. + * + * - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must + * be called whenever the core clock is changed + * during program execution. + * + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32l1xx_system + * @{ + */ + +/** @addtogroup STM32L1xx_System_Private_Includes + * @{ + */ + +#include "stm32l1xx.h" + +/** + * @} + */ + +/** @addtogroup STM32L1xx_System_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32L1xx_System_Private_Defines + * @{ + */ +#if !defined (HSE_VALUE) + #define HSE_VALUE ((uint32_t)8000000) /*!< Default value of the External oscillator in Hz. + This value can be provided and adapted by the user application. */ +#endif /* HSE_VALUE */ + +#if !defined (HSI_VALUE) + #define HSI_VALUE ((uint32_t)8000000) /*!< Default value of the Internal oscillator in Hz. + This value can be provided and adapted by the user application. */ +#endif /* HSI_VALUE */ + +/*!< Uncomment the following line if you need to use external SRAM mounted + on STM32L152D_EVAL board as data memory */ +/* #define DATA_IN_ExtSRAM */ + +/*!< Uncomment the following line if you need to relocate your vector Table in + Internal SRAM. */ +/* #define VECT_TAB_SRAM */ +#define VECT_TAB_OFFSET 0x0 /*!< Vector Table base offset field. + This value must be a multiple of 0x200. */ +/** + * @} + */ + +/** @addtogroup STM32L1xx_System_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32L1xx_System_Private_Variables + * @{ + */ + /* This variable is updated in three ways: + 1) by calling CMSIS function SystemCoreClockUpdate() + 2) by calling HAL API function HAL_RCC_GetHCLKFreq() + 3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency + Note: If you use this function to configure the system clock; then there + is no need to call the 2 first functions listed above, since SystemCoreClock + variable is updated automatically. + */ +uint32_t SystemCoreClock = 32000000; +const uint8_t PLLMulTable[9] = {3, 4, 6, 8, 12, 16, 24, 32, 48}; +const uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9}; +const uint8_t APBPrescTable[8] = {0, 0, 0, 0, 1, 2, 3, 4}; + +/** + * @} + */ + +/** @addtogroup STM32L1xx_System_Private_FunctionPrototypes + * @{ + */ + +#if defined (STM32L151xD) || defined (STM32L152xD) || defined (STM32L162xD) +#ifdef DATA_IN_ExtSRAM + static void SystemInit_ExtMemCtl(void); +#endif /* DATA_IN_ExtSRAM */ +#endif /* STM32L151xD || STM32L152xD || STM32L162xD */ + +/** + * @} + */ + +/** @addtogroup STM32L1xx_System_Private_Functions + * @{ + */ + +/** + * @brief Setup the microcontroller system. + * Initialize the Embedded Flash Interface, the PLL and update the + * SystemCoreClock variable. + * @param None + * @retval None + */ +void SystemInit (void) +{ + /*!< Set MSION bit */ + RCC->CR |= (uint32_t)0x00000100; + + /*!< Reset SW[1:0], HPRE[3:0], PPRE1[2:0], PPRE2[2:0], MCOSEL[2:0] and MCOPRE[2:0] bits */ + RCC->CFGR &= (uint32_t)0x88FFC00C; + + /*!< Reset HSION, HSEON, CSSON and PLLON bits */ + RCC->CR &= (uint32_t)0xEEFEFFFE; + + /*!< Reset HSEBYP bit */ + RCC->CR &= (uint32_t)0xFFFBFFFF; + + /*!< Reset PLLSRC, PLLMUL[3:0] and PLLDIV[1:0] bits */ + RCC->CFGR &= (uint32_t)0xFF02FFFF; + + /*!< Disable all interrupts */ + RCC->CIR = 0x00000000; + +#ifdef DATA_IN_ExtSRAM + SystemInit_ExtMemCtl(); +#endif /* DATA_IN_ExtSRAM */ + +#ifdef VECT_TAB_SRAM + SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM. */ +#else + SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH. */ +#endif +} + +/** + * @brief Update SystemCoreClock according to Clock Register Values + * The SystemCoreClock variable contains the core clock (HCLK), it can + * be used by the user application to setup the SysTick timer or configure + * other parameters. + * + * @note Each time the core clock (HCLK) changes, this function must be called + * to update SystemCoreClock variable value. Otherwise, any configuration + * based on this variable will be incorrect. + * + * @note - The system frequency computed by this function is not the real + * frequency in the chip. It is calculated based on the predefined + * constant and the selected clock source: + * + * - If SYSCLK source is MSI, SystemCoreClock will contain the MSI + * value as defined by the MSI range. + * + * - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*) + * + * - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**) + * + * - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**) + * or HSI_VALUE(*) multiplied/divided by the PLL factors. + * + * (*) HSI_VALUE is a constant defined in stm32l1xx.h file (default value + * 16 MHz) but the real value may vary depending on the variations + * in voltage and temperature. + * + * (**) HSE_VALUE is a constant defined in stm32l1xx.h file (default value + * 8 MHz), user has to ensure that HSE_VALUE is same as the real + * frequency of the crystal used. Otherwise, this function may + * have wrong result. + * + * - The result of this function could be not correct when using fractional + * value for HSE crystal. + * @param None + * @retval None + */ +void SystemCoreClockUpdate (void) +{ + uint32_t tmp = 0, pllmul = 0, plldiv = 0, pllsource = 0, msirange = 0; + + /* Get SYSCLK source -------------------------------------------------------*/ + tmp = RCC->CFGR & RCC_CFGR_SWS; + + switch (tmp) + { + case 0x00: /* MSI used as system clock */ + msirange = (RCC->ICSCR & RCC_ICSCR_MSIRANGE) >> 13; + SystemCoreClock = (32768 * (1 << (msirange + 1))); + break; + case 0x04: /* HSI used as system clock */ + SystemCoreClock = HSI_VALUE; + break; + case 0x08: /* HSE used as system clock */ + SystemCoreClock = HSE_VALUE; + break; + case 0x0C: /* PLL used as system clock */ + /* Get PLL clock source and multiplication factor ----------------------*/ + pllmul = RCC->CFGR & RCC_CFGR_PLLMUL; + plldiv = RCC->CFGR & RCC_CFGR_PLLDIV; + pllmul = PLLMulTable[(pllmul >> 18)]; + plldiv = (plldiv >> 22) + 1; + + pllsource = RCC->CFGR & RCC_CFGR_PLLSRC; + + if (pllsource == 0x00) + { + /* HSI oscillator clock selected as PLL clock entry */ + SystemCoreClock = (((HSI_VALUE) * pllmul) / plldiv); + } + else + { + /* HSE selected as PLL clock entry */ + SystemCoreClock = (((HSE_VALUE) * pllmul) / plldiv); + } + break; + default: /* MSI used as system clock */ + msirange = (RCC->ICSCR & RCC_ICSCR_MSIRANGE) >> 13; + SystemCoreClock = (32768 * (1 << (msirange + 1))); + break; + } + /* Compute HCLK clock frequency --------------------------------------------*/ + /* Get HCLK prescaler */ + tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)]; + /* HCLK clock frequency */ + SystemCoreClock >>= tmp; +} + +#if defined (STM32L151xD) || defined (STM32L152xD) || defined (STM32L162xD) +#ifdef DATA_IN_ExtSRAM +/** + * @brief Setup the external memory controller. + * Called in SystemInit() function before jump to main. + * This function configures the external SRAM mounted on STM32L152D_EVAL board + * This SRAM will be used as program data memory (including heap and stack). + * @param None + * @retval None + */ +void SystemInit_ExtMemCtl(void) +{ + __IO uint32_t tmpreg = 0; + + /* Flash 1 wait state */ + FLASH->ACR |= FLASH_ACR_LATENCY; + + /* Power enable */ + RCC->APB1ENR |= RCC_APB1ENR_PWREN; + + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_PWREN); + + /* Select the Voltage Range 1 (1.8 V) */ + PWR->CR = PWR_CR_VOS_0; + + /* Wait Until the Voltage Regulator is ready */ + while((PWR->CSR & PWR_CSR_VOSF) != RESET) + { + } + +/*-- GPIOs Configuration -----------------------------------------------------*/ +/* + +-------------------+--------------------+------------------+------------------+ + + SRAM pins assignment + + +-------------------+--------------------+------------------+------------------+ + | PD0 <-> FSMC_D2 | PE0 <-> FSMC_NBL0 | PF0 <-> FSMC_A0 | PG0 <-> FSMC_A10 | + | PD1 <-> FSMC_D3 | PE1 <-> FSMC_NBL1 | PF1 <-> FSMC_A1 | PG1 <-> FSMC_A11 | + | PD4 <-> FSMC_NOE | PE7 <-> FSMC_D4 | PF2 <-> FSMC_A2 | PG2 <-> FSMC_A12 | + | PD5 <-> FSMC_NWE | PE8 <-> FSMC_D5 | PF3 <-> FSMC_A3 | PG3 <-> FSMC_A13 | + | PD8 <-> FSMC_D13 | PE9 <-> FSMC_D6 | PF4 <-> FSMC_A4 | PG4 <-> FSMC_A14 | + | PD9 <-> FSMC_D14 | PE10 <-> FSMC_D7 | PF5 <-> FSMC_A5 | PG5 <-> FSMC_A15 | + | PD10 <-> FSMC_D15 | PE11 <-> FSMC_D8 | PF12 <-> FSMC_A6 | PG10<-> FSMC_NE2 | + | PD11 <-> FSMC_A16 | PE12 <-> FSMC_D9 | PF13 <-> FSMC_A7 |------------------+ + | PD12 <-> FSMC_A17 | PE13 <-> FSMC_D10 | PF14 <-> FSMC_A8 | + | PD13 <-> FSMC_A18 | PE14 <-> FSMC_D11 | PF15 <-> FSMC_A9 | + | PD14 <-> FSMC_D0 | PE15 <-> FSMC_D12 |------------------+ + | PD15 <-> FSMC_D1 |--------------------+ + +-------------------+ +*/ + + /* Enable GPIOD, GPIOE, GPIOF and GPIOG interface clock */ + RCC->AHBENR = 0x000080D8; + + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_GPIODEN); + + /* Connect PDx pins to FSMC Alternate function */ + GPIOD->AFR[0] = 0x00CC00CC; + GPIOD->AFR[1] = 0xCCCCCCCC; + /* Configure PDx pins in Alternate function mode */ + GPIOD->MODER = 0xAAAA0A0A; + /* Configure PDx pins speed to 40 MHz */ + GPIOD->OSPEEDR = 0xFFFF0F0F; + /* Configure PDx pins Output type to push-pull */ + GPIOD->OTYPER = 0x00000000; + /* No pull-up, pull-down for PDx pins */ + GPIOD->PUPDR = 0x00000000; + + /* Connect PEx pins to FSMC Alternate function */ + GPIOE->AFR[0] = 0xC00000CC; + GPIOE->AFR[1] = 0xCCCCCCCC; + /* Configure PEx pins in Alternate function mode */ + GPIOE->MODER = 0xAAAA800A; + /* Configure PEx pins speed to 40 MHz */ + GPIOE->OSPEEDR = 0xFFFFC00F; + /* Configure PEx pins Output type to push-pull */ + GPIOE->OTYPER = 0x00000000; + /* No pull-up, pull-down for PEx pins */ + GPIOE->PUPDR = 0x00000000; + + /* Connect PFx pins to FSMC Alternate function */ + GPIOF->AFR[0] = 0x00CCCCCC; + GPIOF->AFR[1] = 0xCCCC0000; + /* Configure PFx pins in Alternate function mode */ + GPIOF->MODER = 0xAA000AAA; + /* Configure PFx pins speed to 40 MHz */ + GPIOF->OSPEEDR = 0xFF000FFF; + /* Configure PFx pins Output type to push-pull */ + GPIOF->OTYPER = 0x00000000; + /* No pull-up, pull-down for PFx pins */ + GPIOF->PUPDR = 0x00000000; + + /* Connect PGx pins to FSMC Alternate function */ + GPIOG->AFR[0] = 0x00CCCCCC; + GPIOG->AFR[1] = 0x00000C00; + /* Configure PGx pins in Alternate function mode */ + GPIOG->MODER = 0x00200AAA; + /* Configure PGx pins speed to 40 MHz */ + GPIOG->OSPEEDR = 0x00300FFF; + /* Configure PGx pins Output type to push-pull */ + GPIOG->OTYPER = 0x00000000; + /* No pull-up, pull-down for PGx pins */ + GPIOG->PUPDR = 0x00000000; + +/*-- FSMC Configuration ------------------------------------------------------*/ + /* Enable the FSMC interface clock */ + RCC->AHBENR = 0x400080D8; + + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_FSMCEN); + + (void)(tmpreg); + + /* Configure and enable Bank1_SRAM3 */ + FSMC_Bank1->BTCR[4] = 0x00001011; + FSMC_Bank1->BTCR[5] = 0x00000300; + FSMC_Bank1E->BWTR[4] = 0x0FFFFFFF; +/* + Bank1_SRAM3 is configured as follow: + + p.FSMC_AddressSetupTime = 0; + p.FSMC_AddressHoldTime = 0; + p.FSMC_DataSetupTime = 3; + p.FSMC_BusTurnAroundDuration = 0; + p.FSMC_CLKDivision = 0; + p.FSMC_DataLatency = 0; + p.FSMC_AccessMode = FSMC_AccessMode_A; + + FSMC_NORSRAMInitStructure.FSMC_Bank = FSMC_Bank1_NORSRAM3; + FSMC_NORSRAMInitStructure.FSMC_DataAddressMux = FSMC_DataAddressMux_Disable; + FSMC_NORSRAMInitStructure.FSMC_MemoryType = FSMC_MemoryType_SRAM; + FSMC_NORSRAMInitStructure.FSMC_MemoryDataWidth = FSMC_MemoryDataWidth_16b; + FSMC_NORSRAMInitStructure.FSMC_BurstAccessMode = FSMC_BurstAccessMode_Disable; + FSMC_NORSRAMInitStructure.FSMC_AsynchronousWait = FSMC_AsynchronousWait_Disable; + FSMC_NORSRAMInitStructure.FSMC_WaitSignalPolarity = FSMC_WaitSignalPolarity_Low; + FSMC_NORSRAMInitStructure.FSMC_WrapMode = FSMC_WrapMode_Disable; + FSMC_NORSRAMInitStructure.FSMC_WaitSignalActive = FSMC_WaitSignalActive_BeforeWaitState; + FSMC_NORSRAMInitStructure.FSMC_WriteOperation = FSMC_WriteOperation_Enable; + FSMC_NORSRAMInitStructure.FSMC_WaitSignal = FSMC_WaitSignal_Disable; + FSMC_NORSRAMInitStructure.FSMC_ExtendedMode = FSMC_ExtendedMode_Disable; + FSMC_NORSRAMInitStructure.FSMC_WriteBurst = FSMC_WriteBurst_Disable; + FSMC_NORSRAMInitStructure.FSMC_ReadWriteTimingStruct = &p; + FSMC_NORSRAMInitStructure.FSMC_WriteTimingStruct = &p; + + FSMC_NORSRAMInit(&FSMC_NORSRAMInitStructure); + + FSMC_NORSRAMCmd(FSMC_Bank1_NORSRAM3, ENABLE); +*/ + +} +#endif /* DATA_IN_ExtSRAM */ +#endif /* STM32L151xD || STM32L152xD || STM32L162xD */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/RAK811BreakBoard/cmsis/system_stm32l1xx.h b/src/RAK811BreakBoard/cmsis/system_stm32l1xx.h new file mode 100755 index 0000000..71a21d6 --- /dev/null +++ b/src/RAK811BreakBoard/cmsis/system_stm32l1xx.h @@ -0,0 +1,126 @@ +/** + ****************************************************************************** + * @file system_stm32l1xx.h + * @author MCD Application Team + * @version V2.2.0 + * @date 01-July-2016 + * @brief CMSIS Cortex-M3 Device System Source File for STM32L1xx devices. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32l1xx_system + * @{ + */ + +/** + * @brief Define to prevent recursive inclusion + */ +#ifndef __SYSTEM_STM32L1XX_H +#define __SYSTEM_STM32L1XX_H + +#ifdef __cplusplus + extern "C" { +#endif + +/** @addtogroup STM32L1xx_System_Includes + * @{ + */ + +/** + * @} + */ + + +/** @addtogroup STM32L1xx_System_Exported_types + * @{ + */ + /* This variable is updated in three ways: + 1) by calling CMSIS function SystemCoreClockUpdate() + 2) by calling HAL API function HAL_RCC_GetSysClockFreq() + 3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency + Note: If you use this function to configure the system clock; then there + is no need to call the 2 first functions listed above, since SystemCoreClock + variable is updated automatically. + */ +extern uint32_t SystemCoreClock; /*!< System Clock Frequency (Core Clock) */ +/* +*/ +extern const uint8_t AHBPrescTable[16]; /*!< AHB prescalers table values */ +extern const uint8_t APBPrescTable[8]; /*!< APB prescalers table values */ +extern const uint8_t PLLMulTable[9]; /*!< PLL multipiers table values */ + +/** + * @} + */ + +/** @addtogroup STM32L1xx_System_Exported_Constants + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32L1xx_System_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32L1xx_System_Exported_Functions + * @{ + */ + +extern void SystemInit(void); +extern void SystemCoreClockUpdate(void); +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /*__SYSTEM_STM32L1XX_H */ + +/** + * @} + */ + +/** + * @} + */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/RAK811BreakBoard/eeprom-board.c b/src/RAK811BreakBoard/eeprom-board.c new file mode 100755 index 0000000..3e8b7f9 --- /dev/null +++ b/src/RAK811BreakBoard/eeprom-board.c @@ -0,0 +1,216 @@ +/* + / _____) _ | | +( (____ _____ ____ _| |_ _____ ____| |__ + \____ \| ___ | (_ _) ___ |/ ___) _ \ + _____) ) ____| | | || |_| ____( (___| | | | +(______/|_____)_|_|_| \__)_____)\____)_| |_| + (C)2013 Semtech + +Description: Timer objects and scheduling management + +License: Revised BSD License, see LICENSE.TXT file include in the project + +Maintainer: Miguel Luis and Gregory Cristian +*/ +#include "board.h" + +#include "i2c-board.h" +#include "eeprom-board.h" + +#define DEVICE_I2C_ADDRESS 0xA8 + +static uint8_t I2cDeviceAddr = DEVICE_I2C_ADDRESS; + +#define EE_PAGE_SIZE 64 + +uint8_t EepromMcuWriteBuffer( uint16_t addr, uint8_t *buffer, uint16_t size ) +{ + uint8_t nbPage = 0; + uint8_t nbBytes = 0; + uint8_t nbBytesRemaining = 0; + uint16_t lAddr = 0; + + lAddr = addr % EE_PAGE_SIZE; + nbBytesRemaining = EE_PAGE_SIZE - lAddr; + nbPage = size / EE_PAGE_SIZE; + nbBytes = size % EE_PAGE_SIZE; + + I2cSetAddrSize( &I2c, I2C_ADDR_SIZE_16 ); + /*!< If lAddr is EE_PAGE_SIZE aligned */ + if( lAddr == 0 ) + { + /*!< If size < EE_PAGE_SIZE */ + if( nbPage == 0 ) + { + if( I2cWriteBuffer( &I2c, I2cDeviceAddr, addr, buffer, size ) == FAIL ) + { + I2cSetAddrSize( &I2c, I2C_ADDR_SIZE_8 ); + return FAIL; + } + if( I2cMcuWaitStandbyState( &I2c, I2cDeviceAddr ) == FAIL ) + { + I2cSetAddrSize( &I2c, I2C_ADDR_SIZE_8 ); + return FAIL; + } + } + /*!< If size > EE_PAGE_SIZE */ + else + { + while( nbPage-- ) + { + if( I2cWriteBuffer( &I2c, I2cDeviceAddr, addr, buffer, EE_PAGE_SIZE ) == FAIL ) + { + I2cSetAddrSize( &I2c, I2C_ADDR_SIZE_8 ); + return FAIL; + } + if( I2cMcuWaitStandbyState( &I2c, I2cDeviceAddr ) == FAIL ) + { + I2cSetAddrSize( &I2c, I2C_ADDR_SIZE_8 ); + return FAIL; + } + addr += EE_PAGE_SIZE; + buffer += EE_PAGE_SIZE; + } + + if( nbBytes != 0 ) + { + if( I2cWriteBuffer( &I2c, I2cDeviceAddr, addr, buffer, nbBytes ) == FAIL ) + { + I2cSetAddrSize( &I2c, I2C_ADDR_SIZE_8 ); + return FAIL; + } + if( I2cMcuWaitStandbyState( &I2c, I2cDeviceAddr ) == FAIL ) + { + I2cSetAddrSize( &I2c, I2C_ADDR_SIZE_8 ); + return FAIL; + } + } + } + } + /*!< If addr is not EE_PAGE_SIZE aligned */ + else + { + /*!< If size < EE_PAGE_SIZE */ + if( nbPage== 0 ) + { + /*!< If the number of data to be written is more than the remaining space + in the current page: */ + if ( size > nbBytesRemaining ) + { + if( I2cWriteBuffer( &I2c, I2cDeviceAddr, addr, buffer, nbBytesRemaining ) == FAIL ) + { + I2cSetAddrSize( &I2c, I2C_ADDR_SIZE_8 ); + return FAIL; + } + if( I2cMcuWaitStandbyState( &I2c, I2cDeviceAddr ) == FAIL ) + { + I2cSetAddrSize( &I2c, I2C_ADDR_SIZE_8 ); + return FAIL; + } + + if( I2cWriteBuffer( &I2c, I2cDeviceAddr, ( addr + nbBytesRemaining ), + ( uint8_t* )( buffer + nbBytesRemaining ), + ( size - nbBytesRemaining ) ) == FAIL ) + { + I2cSetAddrSize( &I2c, I2C_ADDR_SIZE_8 ); + return FAIL; + } + if( I2cMcuWaitStandbyState( &I2c, I2cDeviceAddr ) == FAIL ) + { + I2cSetAddrSize( &I2c, I2C_ADDR_SIZE_8 ); + return FAIL; + } + } + else + { + if( I2cWriteBuffer( &I2c, I2cDeviceAddr, addr, buffer, nbBytes ) == FAIL ) + { + I2cSetAddrSize( &I2c, I2C_ADDR_SIZE_8 ); + return FAIL; + } + if( I2cMcuWaitStandbyState( &I2c, I2cDeviceAddr ) == FAIL ) + { + I2cSetAddrSize( &I2c, I2C_ADDR_SIZE_8 ); + return FAIL; + } + } + } + /*!< If size > EE_PAGE_SIZE */ + else + { + size -= nbBytesRemaining; + nbPage = size / EE_PAGE_SIZE; + nbBytes = size % EE_PAGE_SIZE; + + if( nbBytesRemaining != 0 ) + { + if( I2cWriteBuffer( &I2c, I2cDeviceAddr, addr, buffer, nbBytesRemaining ) == FAIL ) + { + I2cSetAddrSize( &I2c, I2C_ADDR_SIZE_8 ); + return FAIL; + } + if( I2cMcuWaitStandbyState( &I2c, I2cDeviceAddr ) == FAIL ) + { + I2cSetAddrSize( &I2c, I2C_ADDR_SIZE_8 ); + return FAIL; + } + addr += nbBytesRemaining; + buffer += nbBytesRemaining; + } + + while( nbPage-- ) + { + if( I2cWriteBuffer( &I2c, I2cDeviceAddr, addr, buffer, EE_PAGE_SIZE ) == FAIL ) + { + I2cSetAddrSize( &I2c, I2C_ADDR_SIZE_8 ); + return FAIL; + } + if( I2cMcuWaitStandbyState( &I2c, I2cDeviceAddr ) == FAIL ) + { + I2cSetAddrSize( &I2c, I2C_ADDR_SIZE_8 ); + return FAIL; + } + addr += EE_PAGE_SIZE; + buffer += EE_PAGE_SIZE; + } + if( nbBytes != 0 ) + { + if( I2cWriteBuffer( &I2c, I2cDeviceAddr, addr, buffer, nbBytes ) == FAIL ) + { + I2cSetAddrSize( &I2c, I2C_ADDR_SIZE_8 ); + return FAIL; + } + if( I2cMcuWaitStandbyState( &I2c, I2cDeviceAddr ) == FAIL ) + { + I2cSetAddrSize( &I2c, I2C_ADDR_SIZE_8 ); + return FAIL; + } + } + } + } + I2cSetAddrSize( &I2c, I2C_ADDR_SIZE_8 ); + return SUCCESS; +} + +uint8_t EepromMcuReadBuffer( uint16_t addr, uint8_t *buffer, uint16_t size ) +{ + uint8_t status = FAIL; + + I2cSetAddrSize( &I2c, I2C_ADDR_SIZE_16 ); + + status = I2cReadBuffer( &I2c, I2cDeviceAddr, addr, buffer, size ); + + I2cSetAddrSize( &I2c, I2C_ADDR_SIZE_8 ); + + return status; +} + +void EepromMcuSetDeviceAddr( uint8_t addr ) +{ + I2cDeviceAddr = addr; +} + +uint8_t EepromMcuGetDeviceAddr( void ) +{ + return I2cDeviceAddr; +} diff --git a/src/RAK811BreakBoard/eeprom-board.h b/src/RAK811BreakBoard/eeprom-board.h new file mode 100755 index 0000000..fe18e6a --- /dev/null +++ b/src/RAK811BreakBoard/eeprom-board.h @@ -0,0 +1,56 @@ +/* + / _____) _ | | +( (____ _____ ____ _| |_ _____ ____| |__ + \____ \| ___ | (_ _) ___ |/ ___) _ \ + _____) ) ____| | | || |_| ____( (___| | | | +(______/|_____)_|_|_| \__)_____)\____)_| |_| + (C)2013 Semtech + +Description: Timer objects and scheduling management + +License: Revised BSD License, see LICENSE.TXT file include in the project + +Maintainer: Miguel Luis and Gregory Cristian +*/ +#ifndef __EEPROM_MCU_H__ +#define __EEPROM_MCU_H__ + +/*! + * Writes the given buffer to the EEPROM at the specified address. + * + * \param[IN] addr EEPROM address to write to + * \param[IN] buffer Pointer to the buffer to be written. + * \param[IN] size Size of the buffer to be written. + * \retval status [SUCCESS, FAIL] + */ +uint8_t EepromMcuWriteBuffer( uint16_t addr, uint8_t *buffer, uint16_t size ); + +/*! + * Reads the EEPROM at the specified address to the given buffer. + * + * \param[IN] addr EEPROM address to read from + * \param[OUT] buffer Pointer to the buffer to be written with read data. + * \param[IN] size Size of the buffer to be read. + * \retval status [SUCCESS, FAIL] + */ +uint8_t EepromMcuReadBuffer( uint16_t addr, uint8_t *buffer, uint16_t size ); + +/*! + * Sets the device address. + * + * \remark Useful for I2C external EEPROMS + * + * \param[IN] addr External EEPROM address + */ +void EepromMcuSetDeviceAddr( uint8_t addr ); + +/*! + * Gets the current device address. + * + * \remark Useful for I2C external EEPROMS + * + * \retval addr External EEPROM address + */ +uint8_t EepromMcuGetDeviceAddr( void ); + +#endif // __EEPROM_MCU_H__ diff --git a/src/RAK811BreakBoard/gpio-board.c b/src/RAK811BreakBoard/gpio-board.c new file mode 100755 index 0000000..c7429d9 --- /dev/null +++ b/src/RAK811BreakBoard/gpio-board.c @@ -0,0 +1,330 @@ +/* + / _____) _ | | +( (____ _____ ____ _| |_ _____ ____| |__ + \____ \| ___ | (_ _) ___ |/ ___) _ \ + _____) ) ____| | | || |_| ____( (___| | | | +(______/|_____)_|_|_| \__)_____)\____)_| |_| + (C)2013 Semtech + +Description: Bleeper board GPIO driver implementation + +License: Revised BSD License, see LICENSE.TXT file include in the project + +Maintainer: Miguel Luis and Gregory Cristian +*/ +#include "board.h" +#include "gpio-board.h" + +static GpioIrqHandler *GpioIrq[16]; + +void GpioMcuInit( Gpio_t *obj, PinNames pin, PinModes mode, PinConfigs config, PinTypes type, uint32_t value ) +{ + GPIO_InitTypeDef GPIO_InitStructure; + + obj->pin = pin; + + if( pin == NC ) + { + return; + } + + obj->pinIndex = ( 0x01 << ( obj->pin & 0x0F ) ); + + if( ( obj->pin & 0xF0 ) == 0x00 ) + { + obj->port = GPIOA; + __HAL_RCC_GPIOA_CLK_ENABLE( ); + } + else if( ( obj->pin & 0xF0 ) == 0x10 ) + { + obj->port = GPIOB; + __HAL_RCC_GPIOB_CLK_ENABLE( ); + } + else if( ( obj->pin & 0xF0 ) == 0x20 ) + { + obj->port = GPIOC; + __HAL_RCC_GPIOC_CLK_ENABLE( ); + } + else if( ( obj->pin & 0xF0 ) == 0x30 ) + { + obj->port = GPIOD; + __HAL_RCC_GPIOD_CLK_ENABLE( ); + } + else + { + obj->port = GPIOH; + __HAL_RCC_GPIOH_CLK_ENABLE( ); + } + + GPIO_InitStructure.Pin = obj->pinIndex ; + GPIO_InitStructure.Pull = obj->pull = type; + GPIO_InitStructure.Speed = GPIO_SPEED_FREQ_HIGH; + + if( mode == PIN_INPUT ) + { + GPIO_InitStructure.Mode = GPIO_MODE_INPUT; + } + else if( mode == PIN_ANALOGIC ) + { + GPIO_InitStructure.Mode = GPIO_MODE_ANALOG; + } + else if( mode == PIN_ALTERNATE_FCT ) + { + if( config == PIN_OPEN_DRAIN ) + { + GPIO_InitStructure.Mode = GPIO_MODE_AF_OD; + } + else + { + GPIO_InitStructure.Mode = GPIO_MODE_AF_PP; + } + GPIO_InitStructure.Alternate = value; + } + else // mode output + { + if( config == PIN_OPEN_DRAIN ) + { + GPIO_InitStructure.Mode = GPIO_MODE_OUTPUT_OD; + } + else + { + GPIO_InitStructure.Mode = GPIO_MODE_OUTPUT_PP; + } + } + + // Sets initial output value + if( mode == PIN_OUTPUT ) + { + GpioMcuWrite( obj, value ); + } + + HAL_GPIO_Init( obj->port, &GPIO_InitStructure ); +} + +void GpioMcuSetInterrupt( Gpio_t *obj, IrqModes irqMode, IrqPriorities irqPriority, GpioIrqHandler *irqHandler ) +{ + uint32_t priority = 0; + + IRQn_Type IRQnb = EXTI0_IRQn; + GPIO_InitTypeDef GPIO_InitStructure; + + if( irqHandler == NULL ) + { + return; + } + + GPIO_InitStructure.Pin = obj->pinIndex; + + if( irqMode == IRQ_RISING_EDGE ) + { + GPIO_InitStructure.Mode = GPIO_MODE_IT_RISING; + } + else if( irqMode == IRQ_FALLING_EDGE ) + { + GPIO_InitStructure.Mode = GPIO_MODE_IT_FALLING; + } + else + { + GPIO_InitStructure.Mode = GPIO_MODE_IT_RISING_FALLING; + } + + GPIO_InitStructure.Pull = obj->pull; + GPIO_InitStructure.Speed = GPIO_SPEED_FREQ_HIGH; + + HAL_GPIO_Init( obj->port, &GPIO_InitStructure ); + + switch( irqPriority ) + { + case IRQ_VERY_LOW_PRIORITY: + case IRQ_LOW_PRIORITY: + priority = 3; + break; + case IRQ_MEDIUM_PRIORITY: + priority = 2; + break; + case IRQ_HIGH_PRIORITY: + priority = 1; + break; + case IRQ_VERY_HIGH_PRIORITY: + default: + priority = 0; + break; + } + + switch( obj->pinIndex ) + { + case GPIO_PIN_0: + IRQnb = EXTI0_IRQn; + break; + case GPIO_PIN_1: + IRQnb = EXTI1_IRQn; + break; + case GPIO_PIN_2: + IRQnb = EXTI2_IRQn; + break; + case GPIO_PIN_3: + IRQnb = EXTI3_IRQn; + break; + case GPIO_PIN_4: + IRQnb = EXTI4_IRQn; + break; + case GPIO_PIN_5: + case GPIO_PIN_6: + case GPIO_PIN_7: + case GPIO_PIN_8: + case GPIO_PIN_9: + IRQnb = EXTI9_5_IRQn; + break; + case GPIO_PIN_10: + case GPIO_PIN_11: + case GPIO_PIN_12: + case GPIO_PIN_13: + case GPIO_PIN_14: + case GPIO_PIN_15: + IRQnb = EXTI15_10_IRQn; + break; + default: + break; + } + + GpioIrq[( obj->pin ) & 0x0F] = irqHandler; + + HAL_NVIC_SetPriority( IRQnb , priority, 0 ); + HAL_NVIC_EnableIRQ( IRQnb ); +} + +void GpioMcuRemoveInterrupt( Gpio_t *obj ) +{ + GPIO_InitTypeDef GPIO_InitStructure; + + GPIO_InitStructure.Pin = obj->pinIndex ; + GPIO_InitStructure.Mode = GPIO_MODE_ANALOG; + HAL_GPIO_Init( obj->port, &GPIO_InitStructure ); +} + +void GpioMcuWrite( Gpio_t *obj, uint32_t value ) +{ + if( ( obj == NULL ) || ( obj->port == NULL ) ) + { + assert_param( FAIL ); + } + // Check if pin is not connected + if( obj->pin == NC ) + { + return; + } + HAL_GPIO_WritePin( obj->port, obj->pinIndex , ( GPIO_PinState )value ); +} + +void GpioMcuToggle( Gpio_t *obj ) +{ + if( ( obj == NULL ) || ( obj->port == NULL ) ) + { + assert_param( FAIL ); + } + + // Check if pin is not connected + if( obj->pin == NC ) + { + return; + } + HAL_GPIO_TogglePin( obj->port, obj->pinIndex ); +} + +uint32_t GpioMcuRead( Gpio_t *obj ) +{ + if( obj == NULL ) + { + assert_param( FAIL ); + } + // Check if pin is not connected + if( obj->pin == NC ) + { + return 0; + } + return HAL_GPIO_ReadPin( obj->port, obj->pinIndex ); +} + +void EXTI0_IRQHandler( void ) +{ +#if !defined( USE_NO_TIMER ) + RtcRecoverMcuStatus( ); +#endif + HAL_GPIO_EXTI_IRQHandler( GPIO_PIN_0 ); +} + +void EXTI1_IRQHandler( void ) +{ +#if !defined( USE_NO_TIMER ) + RtcRecoverMcuStatus( ); +#endif + HAL_GPIO_EXTI_IRQHandler( GPIO_PIN_1 ); +} + +void EXTI2_IRQHandler( void ) +{ +#if !defined( USE_NO_TIMER ) + RtcRecoverMcuStatus( ); +#endif + HAL_GPIO_EXTI_IRQHandler( GPIO_PIN_2 ); +} + +void EXTI3_IRQHandler( void ) +{ +#if !defined( USE_NO_TIMER ) + RtcRecoverMcuStatus( ); +#endif + HAL_GPIO_EXTI_IRQHandler( GPIO_PIN_3 ); +} + +void EXTI4_IRQHandler( void ) +{ +#if !defined( USE_NO_TIMER ) + RtcRecoverMcuStatus( ); +#endif + HAL_GPIO_EXTI_IRQHandler( GPIO_PIN_4 ); +} + +void EXTI9_5_IRQHandler( void ) +{ +#if !defined( USE_NO_TIMER ) + RtcRecoverMcuStatus( ); +#endif + HAL_GPIO_EXTI_IRQHandler( GPIO_PIN_5 ); + HAL_GPIO_EXTI_IRQHandler( GPIO_PIN_6 ); + HAL_GPIO_EXTI_IRQHandler( GPIO_PIN_7 ); + HAL_GPIO_EXTI_IRQHandler( GPIO_PIN_8 ); + HAL_GPIO_EXTI_IRQHandler( GPIO_PIN_9 ); +} + +void EXTI15_10_IRQHandler( void ) +{ +#if !defined( USE_NO_TIMER ) + RtcRecoverMcuStatus( ); +#endif + HAL_GPIO_EXTI_IRQHandler( GPIO_PIN_10 ); + HAL_GPIO_EXTI_IRQHandler( GPIO_PIN_11 ); + HAL_GPIO_EXTI_IRQHandler( GPIO_PIN_12 ); + HAL_GPIO_EXTI_IRQHandler( GPIO_PIN_13 ); + HAL_GPIO_EXTI_IRQHandler( GPIO_PIN_14 ); + HAL_GPIO_EXTI_IRQHandler( GPIO_PIN_15 ); +} + +void HAL_GPIO_EXTI_Callback( uint16_t gpioPin ) +{ + uint8_t callbackIndex = 0; + + if( gpioPin > 0 ) + { + while( gpioPin != 0x01 ) + { + gpioPin = gpioPin >> 1; + callbackIndex++; + } + } + + if( GpioIrq[callbackIndex] != NULL ) + { + GpioIrq[callbackIndex]( ); + } +} diff --git a/src/RAK811BreakBoard/gpio-board.h b/src/RAK811BreakBoard/gpio-board.h new file mode 100755 index 0000000..7c41a6e --- /dev/null +++ b/src/RAK811BreakBoard/gpio-board.h @@ -0,0 +1,74 @@ +/* + / _____) _ | | +( (____ _____ ____ _| |_ _____ ____| |__ + \____ \| ___ | (_ _) ___ |/ ___) _ \ + _____) ) ____| | | || |_| ____( (___| | | | +(______/|_____)_|_|_| \__)_____)\____)_| |_| + (C)2013 Semtech + +Description: Bleeper board GPIO driver implementation + +License: Revised BSD License, see LICENSE.TXT file include in the project + +Maintainer: Miguel Luis and Gregory Cristian +*/ +#ifndef __GPIO_MCU_H__ +#define __GPIO_MCU_H__ + +/*! + * \brief Initializes the given GPIO object + * + * \param [IN] obj Pointer to the GPIO object to be initialized + * \param [IN] pin Pin name ( please look in pinName-board.h file ) + * \param [IN] mode Pin mode [PIN_INPUT, PIN_OUTPUT, + * PIN_ALTERNATE_FCT, PIN_ANALOGIC] + * \param [IN] config Pin config [PIN_PUSH_PULL, PIN_OPEN_DRAIN] + * \param [IN] type Pin type [PIN_NO_PULL, PIN_PULL_UP, PIN_PULL_DOWN] + * \param [IN] value Default output value at initialization + */ +void GpioMcuInit( Gpio_t *obj, PinNames pin, PinModes mode, PinConfigs config, PinTypes type, uint32_t value ); + +/*! + * \brief GPIO IRQ Initialization + * + * \param [IN] obj Pointer to the GPIO object to be initialized + * \param [IN] irqMode IRQ mode [NO_IRQ, IRQ_RISING_EDGE, + * IRQ_FALLING_EDGE, IRQ_RISING_FALLING_EDGE] + * \param [IN] irqPriority IRQ priority [IRQ_VERY_LOW_PRIORITY, IRQ_LOW_PRIORITY + * IRQ_MEDIUM_PRIORITY, IRQ_HIGH_PRIORITY + * IRQ_VERY_HIGH_PRIORITY] + * \param [IN] irqHandler Callback function pointer + */ +void GpioMcuSetInterrupt( Gpio_t *obj, IrqModes irqMode, IrqPriorities irqPriority, GpioIrqHandler *irqHandler ); + +/*! + * \brief GPIO IRQ DeInitialization + * + * \param [IN] obj Pointer to the GPIO object to be de-initialized + */ +void GpioMcuRemoveInterrupt( Gpio_t *obj ); + +/*! + * \brief Writes the given value to the GPIO output + * + * \param [IN] obj Pointer to the GPIO object + * \param [IN] value New GPIO output value + */ +void GpioMcuWrite( Gpio_t *obj, uint32_t value ); + +/*! + * \brief Toggle the value to the GPIO output + * + * \param [IN] obj Pointer to the GPIO object + */ +void GpioMcuToggle( Gpio_t *obj ); + +/*! + * \brief Reads the current GPIO input value + * + * \param [IN] obj Pointer to the GPIO object + * \retval value Current GPIO input value + */ +uint32_t GpioMcuRead( Gpio_t *obj ); + +#endif // __GPIO_MCU_H__ diff --git a/src/RAK811BreakBoard/gps-board.c b/src/RAK811BreakBoard/gps-board.c new file mode 100755 index 0000000..660d6e3 --- /dev/null +++ b/src/RAK811BreakBoard/gps-board.c @@ -0,0 +1,134 @@ +/* + / _____) _ | | +( (____ _____ ____ _| |_ _____ ____| |__ + \____ \| ___ | (_ _) ___ |/ ___) _ \ + _____) ) ____| | | || |_| ____( (___| | | | +(______/|_____)_|_|_| \__)_____)\____)_| |_| + (C)2013 Semtech + +Description: Generic low level driver for GPS receiver + +License: Revised BSD License, see LICENSE.TXT file include in the project + +Maintainer: Miguel Luis and Gregory Cristian +*/ +#include "board.h" + +/*! + * FIFO buffers size + */ +//#define FIFO_TX_SIZE 128 +//#define FIFO_RX_SIZE 128 + +//uint8_t TxBuffer[FIFO_TX_SIZE]; + + +/*! + * \brief Buffer holding the raw data received from the gps + */ +uint8_t NmeaString[128]; + +/*! + * \brief Maximum number of data byte that we will accept from the GPS + */ +uint8_t NmeaStringSize = 0; + +Gpio_t GpsPowerEn; +Gpio_t GpsPps; + +PpsTrigger_t PpsTrigger; + +void GpsMcuOnPpsSignal( void ) +{ +#ifdef GPS_PPS + bool parseData = false; + + GpsPpsHandler( &parseData ); + + if( parseData == true ) + { + UartMcuInit( &GpsUart, GPS_UART, GPS_UART_TX, GPS_UART_RX ); + UartMcuConfig( &GpsUart, RX_ONLY, 9600, UART_8_BIT, UART_1_STOP_BIT, NO_PARITY, NO_FLOW_CTRL ); + } +#endif +} + +void GpsMcuInvertPpsTrigger( void ) +{ +#if 1 + if( PpsTrigger == PpsTriggerIsRising ) + { + PpsTrigger = PpsTriggerIsFalling; + GpioSetInterrupt( &GpsPps, IRQ_FALLING_EDGE, IRQ_VERY_LOW_PRIORITY, &GpsMcuOnPpsSignal ); + } + else + { + PpsTrigger = PpsTriggerIsRising; + GpioSetInterrupt( &GpsPps, IRQ_RISING_EDGE, IRQ_VERY_LOW_PRIORITY, &GpsMcuOnPpsSignal ); + } +#endif +} + +void GpsMcuInit( void ) +{ + NmeaStringSize = 0; + PpsTrigger = PpsTriggerIsFalling; + + GpioInit( &GpsPowerEn, GPS_POWER_ON_PIN, PIN_OUTPUT, PIN_PUSH_PULL, PIN_NO_PULL, 0 ); + + GpioInit( &GpsPps, GPS_PPS_PIN, PIN_INPUT, PIN_PUSH_PULL, PIN_NO_PULL, 0 ); + GpioSetInterrupt( &GpsPps, IRQ_FALLING_EDGE, IRQ_VERY_LOW_PRIORITY, &GpsMcuOnPpsSignal ); + + //FifoInit( &GpsUart.FifoRx, RxBuffer, FIFO_RX_SIZE ); + GpsUart.IrqNotify = GpsMcuIrqNotify; + + GpsMcuStart( ); + +#ifndef GPS_PPS + UartMcuInit( &GpsUart, GPS_UART, GPS_UART_TX, GPS_UART_RX ); + UartMcuConfig( &GpsUart, RX_ONLY, 9600, UART_8_BIT, UART_1_STOP_BIT, NO_PARITY, NO_FLOW_CTRL ); +#endif +} + +void GpsMcuStart( void ) +{ + GpioWrite( &GpsPowerEn, 1 ); // power up the GPS +} + +void GpsMcuStop( void ) +{ + GpioWrite( &GpsPowerEn, 0 ); // power down the GPS +} + +void GpsMcuProcess( void ) +{ + +} + +void GpsMcuIrqNotify( UartNotifyId_t id ) +{ + uint8_t data; + if( id == UART_NOTIFY_RX ) + { + if( UartMcuGetChar( &GpsUart, &data ) == 0 ) + { + if( ( data == '$' ) || ( NmeaStringSize >= 127 ) ) + { + NmeaStringSize = 0; + } + + NmeaString[NmeaStringSize++] = ( int8_t )data; + + if( data == '\n' ) + { + NmeaString[NmeaStringSize++] = '\0'; + //printf("%d\n",NmeaStringSize); + GpsParseGpsData( ( int8_t* )NmeaString, NmeaStringSize ); +#ifdef GPS_PPS + UartMcuDeInit( &GpsUart ); +#endif + BlockLowPowerDuringTask ( false ); + } + } + } +} diff --git a/src/RAK811BreakBoard/gps-board.h b/src/RAK811BreakBoard/gps-board.h new file mode 100755 index 0000000..bacd8e8 --- /dev/null +++ b/src/RAK811BreakBoard/gps-board.h @@ -0,0 +1,64 @@ +/* + / _____) _ | | +( (____ _____ ____ _| |_ _____ ____| |__ + \____ \| ___ | (_ _) ___ |/ ___) _ \ + _____) ) ____| | | || |_| ____( (___| | | | +(______/|_____)_|_|_| \__)_____)\____)_| |_| + (C)2013 Semtech + +Description: Generic driver for GPS receiver + +License: Revised BSD License, see LICENSE.TXT file include in the project + +Maintainer: Miguel Luis and Gregory Cristian +*/ +#ifndef __GPS_BOARD_H__ +#define __GPS_BOARD_H__ + +/*! + * Select the edge of the PPS signal which is used to start the + * reception of data on the UART. Depending of the GPS, the PPS + * signal may go low or high to indicate the presence of data + */ +typedef enum PpsTrigger_s +{ + PpsTriggerIsRising = 0, + PpsTriggerIsFalling, +}PpsTrigger_t; + +/*! + * \brief Low level handling of the PPS signal from the GPS receiver + */ +void GpsMcuOnPpsSignal( void ); + +/*! + * \brief Invert the IRQ trigger edge on the PPS signal + */ +void GpsMcuInvertPpsTrigger( void ); + +/*! + * \brief Low level Initialisation of the UART and IRQ for the GPS + */ +void GpsMcuInit( void ); + +/*! + * \brief Switch ON the GPS + */ +void GpsMcuStart( void ); + +/*! + * \brief Switch OFF the GPS + */ +void GpsMcuStop( void ); + +/*! + * Updates the GPS status + */ +void GpsMcuProcess( void ); + +/*! + * \brief IRQ handler for the UART receiver + */ +void GpsMcuIrqNotify( UartNotifyId_t id ); + +#endif // __GPS_BOARD_H__ diff --git a/src/RAK811BreakBoard/i2c-board.c b/src/RAK811BreakBoard/i2c-board.c new file mode 100755 index 0000000..845ade9 --- /dev/null +++ b/src/RAK811BreakBoard/i2c-board.c @@ -0,0 +1,148 @@ +/* + / _____) _ | | +( (____ _____ ____ _| |_ _____ ____| |__ + \____ \| ___ | (_ _) ___ |/ ___) _ \ + _____) ) ____| | | || |_| ____( (___| | | | +(______/|_____)_|_|_| \__)_____)\____)_| |_| + (C)2013 Semtech + +Description: Bleeper board I2C driver implementation + +License: Revised BSD License, see LICENSE.TXT file include in the project + +Maintainer: Miguel Luis and Gregory Cristian +*/ +#include "board.h" +#include "i2c-board.h" + +/*! + * The value of the maximal timeout for I2C waiting loops + */ +#define TIMEOUT_MAX 0x8000 + +I2cAddrSize I2cInternalAddrSize = I2C_ADDR_SIZE_8; + +/*! + * MCU I2C peripherals enumeration + */ +typedef enum { + I2C_1 = ( uint32_t )I2C1_BASE, + I2C_2 = ( uint32_t )I2C2_BASE, +} I2cName; + +void I2cMcuInit( I2c_t *obj, PinNames scl, PinNames sda ) +{ + __HAL_RCC_I2C1_CLK_DISABLE( ); + __HAL_RCC_I2C1_CLK_ENABLE( ); + __HAL_RCC_I2C1_FORCE_RESET( ); + __HAL_RCC_I2C1_RELEASE_RESET( ); + + obj->I2c.Instance = ( I2C_TypeDef * )I2C1_BASE; + + GpioInit( &obj->Scl, scl, PIN_ALTERNATE_FCT, PIN_OPEN_DRAIN, PIN_NO_PULL, GPIO_AF4_I2C1 ); + GpioInit( &obj->Sda, sda, PIN_ALTERNATE_FCT, PIN_OPEN_DRAIN, PIN_NO_PULL, GPIO_AF4_I2C1 ); +} + +void I2cMcuFormat( I2c_t *obj, I2cMode mode, I2cDutyCycle dutyCycle, bool I2cAckEnable, I2cAckAddrMode AckAddrMode, uint32_t I2cFrequency ) +{ + I2C_HandleTypeDef *i2c; + + __HAL_RCC_I2C1_CLK_ENABLE( ); + obj->I2c.Init.ClockSpeed = I2cFrequency; + + if( dutyCycle == I2C_DUTY_CYCLE_2 ) + { + obj->I2c.Init.DutyCycle = I2C_DUTYCYCLE_2; + } + else + { + obj->I2c.Init.DutyCycle = I2C_DUTYCYCLE_16_9; + } + + obj->I2c.Init.OwnAddress1 = 0; + obj->I2c.Init.AddressingMode = I2C_ADDRESSINGMODE_7BIT; + obj->I2c.Init.DualAddressMode = I2C_DUALADDRESS_DISABLE; + obj->I2c.Init.OwnAddress2 = 0; + obj->I2c.Init.GeneralCallMode = I2C_GENERALCALL_DISABLED; + obj->I2c.Init.NoStretchMode = I2C_NOSTRETCH_DISABLED; + + i2c = &obj->I2c; + HAL_I2C_Init( i2c ); +} + +void I2cMcuDeInit( I2c_t *obj ) +{ + I2C_HandleTypeDef *i2c; + i2c = &obj->I2c; + + HAL_I2C_DeInit( i2c ); + + if( obj->I2c.Instance == ( I2C_TypeDef * ) I2C1_BASE ) + { + __HAL_RCC_I2C1_FORCE_RESET(); + __HAL_RCC_I2C1_RELEASE_RESET(); + __HAL_RCC_I2C1_CLK_DISABLE( ); + } + else + { + __HAL_RCC_I2C2_FORCE_RESET(); + __HAL_RCC_I2C2_RELEASE_RESET(); + __HAL_RCC_I2C2_CLK_DISABLE( ); + } + + GpioInit( &obj->Scl, obj->Scl.pin, PIN_ANALOGIC, PIN_PUSH_PULL, PIN_NO_PULL, 0 ); + GpioInit( &obj->Sda, obj->Sda.pin, PIN_ANALOGIC, PIN_PUSH_PULL, PIN_NO_PULL, 0 ); +} + +void I2cSetAddrSize( I2c_t *obj, I2cAddrSize addrSize ) +{ + I2cInternalAddrSize = addrSize; +} + +uint8_t I2cMcuWriteBuffer( I2c_t *obj, uint8_t deviceAddr, uint16_t addr, uint8_t *buffer, uint16_t size ) +{ + uint8_t status = FAIL; + uint16_t memAddSize = 0; + + I2C_HandleTypeDef *i2c; + i2c = &obj->I2c; + + if( I2cInternalAddrSize == I2C_ADDR_SIZE_8 ) + { + memAddSize = I2C_MEMADD_SIZE_8BIT; + } + else + { + memAddSize = I2C_MEMADD_SIZE_16BIT; + } + status = ( HAL_I2C_Mem_Write( i2c, deviceAddr, addr, memAddSize, buffer, size, 2000 ) == HAL_OK ) ? SUCCESS : FAIL; + return status; +} + +uint8_t I2cMcuReadBuffer( I2c_t *obj, uint8_t deviceAddr, uint16_t addr, uint8_t *buffer, uint16_t size ) +{ + uint8_t status = FAIL; + uint16_t memAddSize = 0; + + I2C_HandleTypeDef *i2c; + i2c = &obj->I2c; + if( I2cInternalAddrSize == I2C_ADDR_SIZE_8 ) + { + memAddSize = I2C_MEMADD_SIZE_8BIT; + } + else + { + memAddSize = I2C_MEMADD_SIZE_16BIT; + } + status = ( HAL_I2C_Mem_Read( i2c, deviceAddr, addr, memAddSize, buffer, size, 2000 ) == HAL_OK ) ? SUCCESS : FAIL; + return status; +} + +uint8_t I2cMcuWaitStandbyState( I2c_t *obj, uint8_t deviceAddr ) +{ + uint8_t status = FAIL; + I2C_HandleTypeDef *i2c; + i2c = &obj->I2c; + status = ( HAL_I2C_IsDeviceReady( i2c, deviceAddr, 300, 4096 ) == HAL_OK ) ? SUCCESS : FAIL;; + return status; +} diff --git a/src/RAK811BreakBoard/i2c-board.h b/src/RAK811BreakBoard/i2c-board.h new file mode 100755 index 0000000..5fb6b5e --- /dev/null +++ b/src/RAK811BreakBoard/i2c-board.h @@ -0,0 +1,121 @@ +/* + / _____) _ | | +( (____ _____ ____ _| |_ _____ ____| |__ + \____ \| ___ | (_ _) ___ |/ ___) _ \ + _____) ) ____| | | || |_| ____( (___| | | | +(______/|_____)_|_|_| \__)_____)\____)_| |_| + (C)2013 Semtech + +Description: Bleeper board I2C driver implementation + +License: Revised BSD License, see LICENSE.TXT file include in the project + +Maintainer: Miguel Luis and Gregory Cristian +*/ +#ifndef __I2C_MCU_H__ +#define __I2C_MCU_H__ + +/*! + * Operation Mode for the I2C + */ +typedef enum +{ + MODE_I2C = 0, + MODE_SMBUS_DEVICE, + MODE_SMBUS_HOST +}I2cMode; + +/*! + * I2C signal duty cycle + */ +typedef enum +{ + I2C_DUTY_CYCLE_2 = 0, + I2C_DUTY_CYCLE_16_9 +}I2cDutyCycle; + +/*! + * I2C select if the acknowledge in after the 7th or 10th bit + */ +typedef enum +{ + I2C_ACK_ADD_7_BIT = 0, + I2C_ACK_ADD_10_BIT +}I2cAckAddrMode; + +/*! + * Internal device address size + */ +typedef enum +{ + I2C_ADDR_SIZE_8 = 0, + I2C_ADDR_SIZE_16, +}I2cAddrSize; + +/*! + * \brief Initializes the I2C object and MCU peripheral + * + * \param [IN] obj I2C object + * \param [IN] scl I2C Scl pin name to be used + * \param [IN] sda I2C Sda pin name to be used + */ +void I2cMcuInit( I2c_t *obj, PinNames scl, PinNames sda ); + +/*! + * \brief Initializes the I2C object and MCU peripheral + * + * \param [IN] obj I2C object + * \param [IN] mode Mode of operation for the I2C Bus + * \param [IN] dutyCycle Signal duty cycle + * \param [IN] I2cAckEnable Enable or Disable to ack + * \param [IN] AckAddrMode 7bit or 10 bit addressing + * \param [IN] I2cFrequency I2C bus clock frequency + */ +void I2cMcuFormat( I2c_t *obj, I2cMode mode, I2cDutyCycle dutyCycle, bool I2cAckEnable, I2cAckAddrMode AckAddrMode, uint32_t I2cFrequency ); + +/*! + * \brief DeInitializes the I2C object and MCU peripheral + * + * \param [IN] obj I2C object + */ +void I2cMcuDeInit( I2c_t *obj ); + +/*! + * \brief Write several data to the I2C device + * + * \param [IN] obj I2C object + * \param [IN] deviceAddr device address + * \param [IN] addr register address + * \param [IN] buffer data buffer to write + * \param [IN] size number of data byte to write + */ +uint8_t I2cMcuWriteBuffer( I2c_t *obj, uint8_t deviceAddr, uint16_t addr, uint8_t *buffer, uint16_t size ); + +/*! + * \brief Read several data byte from the I2C device + * + * \param [IN] obj I2C object + * \param [IN] deviceAddr device address + * \param [IN] addr register address + * \param [IN] buffer data buffer used to store the data read + * \param [IN] size number of data byte to read + */ +uint8_t I2cMcuReadBuffer( I2c_t *obj, uint8_t deviceAddr, uint16_t addr, uint8_t *buffer, uint16_t size ); + +/*! + * \brief Waits until the given device is in standby mode + * + * \param [IN] obj I2C object + * \param [IN] deviceAddr device address + */ +uint8_t I2cMcuWaitStandbyState( I2c_t *obj, uint8_t deviceAddr ); + +/*! + * \brief Sets the internal device address size + * + * \param [IN] obj I2C object + * \param [IN] addrSize Internal address size + */ +void I2cSetAddrSize( I2c_t *obj, I2cAddrSize addrSize ); + +#endif // __I2C_MCU_H__ diff --git a/src/RAK811BreakBoard/pinName-board.h b/src/RAK811BreakBoard/pinName-board.h new file mode 100755 index 0000000..1747a8e --- /dev/null +++ b/src/RAK811BreakBoard/pinName-board.h @@ -0,0 +1,30 @@ +/* + / _____) _ | | +( (____ _____ ____ _| |_ _____ ____| |__ + \____ \| ___ | (_ _) ___ |/ ___) _ \ + _____) ) ____| | | || |_| ____( (___| | | | +(______/|_____)_|_|_| \__)_____)\____)_| |_| + (C)2013 Semtech + +Description: Bleeper STM32L151RD microcontroller pins definition + +License: Revised BSD License, see LICENSE.TXT file include in the project + +Maintainer: Miguel Luis and Gregory Cristian +*/ +#ifndef __PIN_NAME_MCU_H__ +#define __PIN_NAME_MCU_H__ + +/*! + * STM32 Pin Names + */ +#define MCU_PINS \ + PA_0 = 0, PA_1, PA_2, PA_3, PA_4, PA_5, PA_6, PA_7, PA_8, PA_9, PA_10, PA_11, PA_12, PA_13, PA_14, PA_15, \ + PB_0, PB_1, PB_2, PB_3, PB_4, PB_5, PB_6, PB_7, PB_8, PB_9, PB_10, PB_11, PB_12, PB_13, PB_14, PB_15, \ + PC_0, PC_1, PC_2, PC_3, PC_4, PC_5, PC_6, PC_7, PC_8, PC_9, PC_10, PC_11, PC_12, PC_13, PC_14, PC_15, \ + PD_0, PD_1, PD_2, PD_3, PD_4, PD_5, PD_6, PD_7, PD_8, PD_9, PD_10, PD_11, PD_12, PD_13, PD_14, PD_15, \ + PE_0, PE_1, PE_2, PE_3, PE_4, PE_5, PE_6, PE_7, PE_8, PE_9, PE_10, PE_11, PE_12, PE_13, PE_14, PE_15, \ + PF_0, PF_1, PF_2, PF_3, PF_4, PF_5, PF_6, PF_7, PF_8, PF_9, PF_10, PF_11, PF_12, PF_13, PF_14, PF_15, \ + PH_0, PH_1, PH_2, PH_3, PH_4, PH_5, PH_6, PH_7, PH_8, PH_9, PH_10, PH_11, PH_12, PH_13, PH_14, PH_15 + +#endif // __PIN_NAME_MCU_H__ diff --git a/src/RAK811BreakBoard/pinName-ioe.h b/src/RAK811BreakBoard/pinName-ioe.h new file mode 100755 index 0000000..4a5380e --- /dev/null +++ b/src/RAK811BreakBoard/pinName-ioe.h @@ -0,0 +1,22 @@ +/* + / _____) _ | | +( (____ _____ ____ _| |_ _____ ____| |__ + \____ \| ___ | (_ _) ___ |/ ___) _ \ + _____) ) ____| | | || |_| ____( (___| | | | +(______/|_____)_|_|_| \__)_____)\____)_| |_| + (C)2013 Semtech + +Description: Bleeper STM32L151RD microcontroller pins definition + +License: Revised BSD License, see LICENSE.TXT file include in the project + +Maintainer: Miguel Luis and Gregory Cristian +*/ +#ifndef __PIN_NAME_IOE_H__ +#define __PIN_NAME_IOE_H__ + +// SX1509 Pin Names +#define IOE_PINS \ + IOE_0, IOE_1, IOE_2, IOE_3, IOE_4, IOE_5, IOE_6, IOE_7, \ + IOE_8, IOE_9, IOE_10, IOE_11, IOE_12, IOE_13, IOE_14, IOE_15 +#endif // __PIN_NAME_IOE_H__ diff --git a/src/RAK811BreakBoard/rtc-board.c b/src/RAK811BreakBoard/rtc-board.c new file mode 100755 index 0000000..cba58d4 --- /dev/null +++ b/src/RAK811BreakBoard/rtc-board.c @@ -0,0 +1,720 @@ +/* + / _____) _ | | +( (____ _____ ____ _| |_ _____ ____| |__ + \____ \| ___ | (_ _) ___ |/ ___) _ \ + _____) ) ____| | | || |_| ____( (___| | | | +(______/|_____)_|_|_| \__)_____)\____)_| |_| + (C)2013 Semtech + +Description: MCU RTC timer and low power modes management + +License: Revised BSD License, see LICENSE.TXT file include in the project + +Maintainer: Miguel Luis and Gregory Cristian +*/ +#include +#include "board.h" +#include "rtc-board.h" + +/*! + * RTC Time base in ms + */ +#define RTC_ALARM_TICK_DURATION 0.48828125 // 1 tick every 488us +#define RTC_ALARM_TICK_PER_MS 2.048 // 1/2.048 = tick duration in ms + +/*! + * Maximum number of days that can be handled by the RTC alarm counter before overflow. + */ +#define RTC_ALARM_MAX_NUMBER_OF_DAYS 28 + +/*! + * Number of seconds in a minute + */ +static const uint8_t SecondsInMinute = 60; + +/*! + * Number of seconds in an hour + */ +static const uint16_t SecondsInHour = 3600; + +/*! + * Number of seconds in a day + */ +static const uint32_t SecondsInDay = 86400; + +/*! + * Number of hours in a day + */ +static const uint8_t HoursInDay = 24; + +/*! + * Number of seconds in a leap year + */ +static const uint32_t SecondsInLeapYear = 31622400; + +/*! + * Number of seconds in a year + */ +static const uint32_t SecondsInYear = 31536000; + +/*! + * Number of days in each month on a normal year + */ +static const uint8_t DaysInMonth[] = { 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 }; + +/*! + * Number of days in each month on a leap year + */ +static const uint8_t DaysInMonthLeapYear[] = { 31, 29, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 }; + +/*! + * Holds the current century for real time computation + */ +static uint16_t Century = 0; + +/*! + * Flag used to indicates a Calendar Roll Over is about to happen + */ +static bool CalendarRollOverReady = false; + +/*! + * Flag used to indicates a the MCU has waken-up from an external IRQ + */ +volatile bool NonScheduledWakeUp = false; + +/*! + * RTC timer context + */ +typedef struct RtcCalendar_s +{ + uint16_t CalendarCentury; //! Keep track of century value + RTC_DateTypeDef CalendarDate; //! Reference time in calendar format + RTC_TimeTypeDef CalendarTime; //! Reference date in calendar format +} RtcCalendar_t; + +/*! + * Current RTC timer context + */ +RtcCalendar_t RtcCalendarContext; + +/*! + * \brief Flag to indicate if the timestamps until the next event is long enough + * to set the MCU into low power mode + */ +static bool RtcTimerEventAllowsLowPower = false; + +/*! + * \brief Flag to disable the LowPower Mode even if the timestamps until the + * next event is long enough to allow Low Power mode + */ +static bool LowPowerDisableDuringTask = false; + +/*! + * \brief RTC Handler + */ +RTC_HandleTypeDef RtcHandle = { 0 }; + +/*! + * \brief Indicates if the RTC is already Initialized or not + */ +static bool RtcInitialized = false; + +/*! + * \brief Indicates if the RTC Wake Up Time is calibrated or not + */ +static bool WakeUpTimeInitialized = false; + +/*! + * \brief Hold the Wake-up time duration in ms + */ +volatile uint32_t McuWakeUpTime = 0; + +/*! + * \brief Hold the cumulated error in micro-second to compensate the timing errors + */ +static int32_t TimeoutValueError = 0; + +/*! + * \brief RTC wakeup time computation + */ +static void RtcComputeWakeUpTime( void ); + +/*! + * \brief Start the RTC Alarm (timeoutValue is in ms) + */ +static void RtcStartWakeUpAlarm( uint32_t timeoutValue ); + +/*! + * \brief Converts a TimerTime_t value into RtcCalendar_t value + * + * \param[IN] timeCounter Value to convert to RTC calendar + * \retval rtcCalendar New RTC calendar value + */ +// +// REMARK: Removed function static attribute in order to suppress +// "#177-D function was declared but never referenced" warning. +// static RtcCalendar_t RtcConvertTimerTimeToCalendarTick( TimerTime_t timeCounter ) +// +RtcCalendar_t RtcConvertTimerTimeToCalendarTick( TimerTime_t timeCounter ); + +/*! + * \brief Converts a RtcCalendar_t value into TimerTime_t value + * + * \param[IN/OUT] calendar Calendar value to be converted + * [NULL: compute from "now", + * Others: compute from given calendar value] + * \retval timerTime New TimerTime_t value + */ +static TimerTime_t RtcConvertCalendarTickToTimerTime( RtcCalendar_t *calendar ); + +/*! + * \brief Converts a TimerTime_t value into a value for the RTC Alarm + * + * \param[IN] timeCounter Value in ms to convert into a calendar alarm date + * \param[IN] now Current RTC calendar context + * \retval rtcCalendar Value for the RTC Alarm + */ +static RtcCalendar_t RtcComputeTimerTimeToAlarmTick( TimerTime_t timeCounter, RtcCalendar_t now ); + +/*! + * \brief Returns the internal RTC Calendar and check for RTC overflow + * + * \retval calendar RTC calendar + */ +static RtcCalendar_t RtcGetCalendar( void ); + +/*! + * \brief Check the status for the calendar year to increase the value of Century at the overflow of the RTC + * + * \param[IN] year Calendar current year + */ +static void RtcCheckCalendarRollOver( uint8_t year ); + +void RtcInit( void ) +{ + RtcCalendar_t rtcInit; + + if( RtcInitialized == false ) + { + __HAL_RCC_RTC_ENABLE( ); + + RtcHandle.Instance = RTC; + RtcHandle.Init.HourFormat = RTC_HOURFORMAT_24; + + RtcHandle.Init.AsynchPrediv = 3; + RtcHandle.Init.SynchPrediv = 3; + + RtcHandle.Init.OutPut = RTC_OUTPUT_DISABLE; + RtcHandle.Init.OutPutPolarity = RTC_OUTPUT_POLARITY_HIGH; + RtcHandle.Init.OutPutType = RTC_OUTPUT_TYPE_OPENDRAIN; + HAL_RTC_Init( &RtcHandle ); + + // Set Date: Friday 1st of January 2000 + rtcInit.CalendarDate.Year = 0; + rtcInit.CalendarDate.Month = 1; + rtcInit.CalendarDate.Date = 1; + rtcInit.CalendarDate.WeekDay = RTC_WEEKDAY_SATURDAY; + HAL_RTC_SetDate( &RtcHandle, &rtcInit.CalendarDate, RTC_FORMAT_BIN ); + + // Set Time: 00:00:00 + rtcInit.CalendarTime.Hours = 0; + rtcInit.CalendarTime.Minutes = 0; + rtcInit.CalendarTime.Seconds = 0; + rtcInit.CalendarTime.TimeFormat = RTC_HOURFORMAT12_AM; + rtcInit.CalendarTime.DayLightSaving = RTC_DAYLIGHTSAVING_NONE; + rtcInit.CalendarTime.StoreOperation = RTC_STOREOPERATION_RESET; + HAL_RTC_SetTime( &RtcHandle, &rtcInit.CalendarTime, RTC_FORMAT_BIN ); + + HAL_NVIC_SetPriority( RTC_Alarm_IRQn, 4, 0 ); + HAL_NVIC_EnableIRQ( RTC_Alarm_IRQn ); + RtcInitialized = true; + } +} + +void RtcSetTimeout( uint32_t timeout ) +{ + RtcStartWakeUpAlarm( timeout ); +} + +TimerTime_t RtcGetAdjustedTimeoutValue( uint32_t timeout ) +{ + if( timeout > McuWakeUpTime ) + { // we have waken up from a GPIO and we have lost "McuWakeUpTime" that we need to compensate on next event + if( NonScheduledWakeUp == true ) + { + NonScheduledWakeUp = false; + timeout -= McuWakeUpTime; + } + } + + if( timeout > McuWakeUpTime ) + { // we don't go in Low Power mode for delay below 50ms (needed for LEDs) + if( timeout < 50 ) // 50 ms + { + RtcTimerEventAllowsLowPower = false; + } + else + { + RtcTimerEventAllowsLowPower = true; + timeout -= McuWakeUpTime; + } + } + return timeout; +} + +TimerTime_t RtcGetTimerValue( void ) +{ + return( RtcConvertCalendarTickToTimerTime( NULL ) ); +} + +TimerTime_t RtcGetElapsedAlarmTime( void ) +{ + TimerTime_t currentTime = 0; + TimerTime_t contextTime = 0; + + currentTime = RtcConvertCalendarTickToTimerTime( NULL ); + contextTime = RtcConvertCalendarTickToTimerTime( &RtcCalendarContext ); + + if( currentTime < contextTime ) + { + return( currentTime + ( 0xFFFFFFFF - contextTime ) ); + } + else + { + return( currentTime - contextTime ); + } +} + +TimerTime_t RtcComputeFutureEventTime( TimerTime_t futureEventInTime ) +{ + return( RtcGetTimerValue( ) + futureEventInTime ); +} + +TimerTime_t RtcComputeElapsedTime( TimerTime_t eventInTime ) +{ + TimerTime_t elapsedTime = 0; + + // Needed at boot, cannot compute with 0 or elapsed time will be equal to current time + if( eventInTime == 0 ) + { + return 0; + } + + elapsedTime = RtcConvertCalendarTickToTimerTime( NULL ); + + if( elapsedTime < eventInTime ) + { // roll over of the counter + return( elapsedTime + ( 0xFFFFFFFF - eventInTime ) ); + } + else + { + return( elapsedTime - eventInTime ); + } +} + +void BlockLowPowerDuringTask ( bool status ) +{ + if( status == true ) + { + RtcRecoverMcuStatus( ); + } + LowPowerDisableDuringTask = status; +} + +void RtcEnterLowPowerStopMode( void ) +{ + if( ( LowPowerDisableDuringTask == false ) && ( RtcTimerEventAllowsLowPower == true ) ) + { + BoardDeInitMcu( ); + + // Disable the Power Voltage Detector + HAL_PWR_DisablePVD( ); + + SET_BIT( PWR->CR, PWR_CR_CWUF ); + + // Enable Ultra low power mode + HAL_PWREx_EnableUltraLowPower( ); + + // Enable the fast wake up from Ultra low power mode + HAL_PWREx_EnableFastWakeUp( ); + + // Enter Stop Mode + HAL_PWR_EnterSTOPMode( PWR_LOWPOWERREGULATOR_ON, PWR_STOPENTRY_WFI ); + } +} + +void RtcRecoverMcuStatus( void ) +{ + // PWR_FLAG_WU indicates the Alarm has waken-up the MCU + if( __HAL_PWR_GET_FLAG( PWR_FLAG_WU ) != RESET ) + { + __HAL_PWR_CLEAR_FLAG( PWR_FLAG_WU ); + } + else + { + NonScheduledWakeUp = true; + } + // check the clk source and set to full speed if we are coming from sleep mode + if( ( __HAL_RCC_GET_SYSCLK_SOURCE( ) == RCC_SYSCLKSOURCE_STATUS_HSI ) || + ( __HAL_RCC_GET_SYSCLK_SOURCE( ) == RCC_SYSCLKSOURCE_STATUS_MSI ) ) + { + BoardInitMcu( ); + } +} + +static void RtcComputeWakeUpTime( void ) +{ + uint32_t start = 0; + uint32_t stop = 0; + RTC_AlarmTypeDef alarmRtc; + RtcCalendar_t now; + + if( WakeUpTimeInitialized == false ) + { + now = RtcGetCalendar( ); + HAL_RTC_GetAlarm( &RtcHandle, &alarmRtc, RTC_ALARM_A, RTC_FORMAT_BIN ); + + start = alarmRtc.AlarmTime.Seconds + ( SecondsInMinute * alarmRtc.AlarmTime.Minutes ) + ( SecondsInHour * alarmRtc.AlarmTime.Hours ); + stop = now.CalendarTime.Seconds + ( SecondsInMinute * now.CalendarTime.Minutes ) + ( SecondsInHour * now.CalendarTime.Hours ); + + McuWakeUpTime = ceil ( ( stop - start ) * RTC_ALARM_TICK_DURATION ); + + WakeUpTimeInitialized = true; + } +} + +static void RtcStartWakeUpAlarm( uint32_t timeoutValue ) +{ + RtcCalendar_t now; + RtcCalendar_t alarmTimer; + RTC_AlarmTypeDef alarmStructure; + + HAL_RTC_DeactivateAlarm( &RtcHandle, RTC_ALARM_A ); + HAL_RTCEx_DeactivateWakeUpTimer( &RtcHandle ); + + // Load the RTC calendar + now = RtcGetCalendar( ); + + // Save the calendar into RtcCalendarContext to be able to calculate the elapsed time + RtcCalendarContext = now; + + // timeoutValue is in ms + alarmTimer = RtcComputeTimerTimeToAlarmTick( timeoutValue, now ); + + alarmStructure.Alarm = RTC_ALARM_A; + alarmStructure.AlarmDateWeekDaySel = RTC_ALARMDATEWEEKDAYSEL_DATE; + alarmStructure.AlarmMask = RTC_ALARMMASK_NONE; + alarmStructure.AlarmTime.TimeFormat = RTC_HOURFORMAT12_AM; + + alarmStructure.AlarmTime.Seconds = alarmTimer.CalendarTime.Seconds; + alarmStructure.AlarmTime.Minutes = alarmTimer.CalendarTime.Minutes; + alarmStructure.AlarmTime.Hours = alarmTimer.CalendarTime.Hours; + alarmStructure.AlarmDateWeekDay = alarmTimer.CalendarDate.Date; + + if( HAL_RTC_SetAlarm_IT( &RtcHandle, &alarmStructure, RTC_FORMAT_BIN ) != HAL_OK ) + { + assert_param( FAIL ); + } +} + +static RtcCalendar_t RtcComputeTimerTimeToAlarmTick( TimerTime_t timeCounter, RtcCalendar_t now ) +{ + RtcCalendar_t calendar = now; + + uint16_t seconds = now.CalendarTime.Seconds; + uint16_t minutes = now.CalendarTime.Minutes; + uint16_t hours = now.CalendarTime.Hours; + uint16_t days = now.CalendarDate.Date; + double timeoutValueTemp = 0.0; + double timeoutValue = 0.0; + double error = 0.0; + + timeCounter = MIN( timeCounter, ( TimerTime_t )( RTC_ALARM_MAX_NUMBER_OF_DAYS * SecondsInDay * RTC_ALARM_TICK_DURATION ) ); + + if( timeCounter < 1 ) + { + timeCounter = 1; + } + + // timeoutValue is used for complete computation + timeoutValue = round( timeCounter * RTC_ALARM_TICK_PER_MS ); + + // timeoutValueTemp is used to compensate the cumulating errors in timing far in the future + timeoutValueTemp = ( double )timeCounter * RTC_ALARM_TICK_PER_MS; + + // Compute timeoutValue error + error = timeoutValue - timeoutValueTemp; + + // Add new error value to the cumulated value in uS + TimeoutValueError += ( error * 1000 ); + + // Correct cumulated error if greater than ( RTC_ALARM_TICK_DURATION * 1000 ) + if( TimeoutValueError >= ( int32_t )( RTC_ALARM_TICK_DURATION * 1000 ) ) + { + TimeoutValueError = TimeoutValueError - ( uint32_t )( RTC_ALARM_TICK_DURATION * 1000 ); + timeoutValue = timeoutValue + 1; + } + + // Convert milliseconds to RTC format and add to now + while( timeoutValue >= SecondsInDay ) + { + timeoutValue -= SecondsInDay; + days++; + } + + // Calculate hours + while( timeoutValue >= SecondsInHour ) + { + timeoutValue -= SecondsInHour; + hours++; + } + + // Calculate minutes + while( timeoutValue >= SecondsInMinute ) + { + timeoutValue -= SecondsInMinute; + minutes++; + } + + // Calculate seconds + seconds += timeoutValue; + + // Correct for modulo + while( seconds >= 60 ) + { + seconds -= 60; + minutes++; + } + + while( minutes >= 60 ) + { + minutes -= 60; + hours++; + } + + while( hours >= HoursInDay ) + { + hours -= HoursInDay; + days++; + } + + if( ( now.CalendarDate.Year == 0 ) || ( ( now.CalendarDate.Year + Century ) % 4 ) == 0 ) + { + if( days > DaysInMonthLeapYear[now.CalendarDate.Month - 1] ) + { + days = days % DaysInMonthLeapYear[now.CalendarDate.Month - 1]; + } + } + else + { + if( days > DaysInMonth[now.CalendarDate.Month - 1] ) + { + days = days % DaysInMonth[now.CalendarDate.Month - 1]; + } + } + + calendar.CalendarTime.Seconds = seconds; + calendar.CalendarTime.Minutes = minutes; + calendar.CalendarTime.Hours = hours; + calendar.CalendarDate.Date = days; + + return calendar; +} + +// +// REMARK: Removed function static attribute in order to suppress +// "#177-D function was declared but never referenced" warning. +// static RtcCalendar_t RtcConvertTimerTimeToCalendarTick( TimerTime_t timeCounter ) +// +RtcCalendar_t RtcConvertTimerTimeToCalendarTick( TimerTime_t timeCounter ) +{ + RtcCalendar_t calendar = { 0 }; + + uint16_t seconds = 0; + uint16_t minutes = 0; + uint16_t hours = 0; + uint16_t days = 0; + uint8_t months = 1; // Start at 1, month 0 does not exist + uint16_t years = 0; + uint16_t century = 0; + double timeCounterTemp = 0.0; + + timeCounterTemp = ( double )timeCounter * RTC_ALARM_TICK_PER_MS; + + // Convert milliseconds to RTC format and add to now + while( timeCounterTemp >= SecondsInLeapYear ) + { + if( ( years == 0 ) || ( years % 4 ) == 0 ) + { + timeCounterTemp -= SecondsInLeapYear; + } + else + { + timeCounterTemp -= SecondsInYear; + } + years++; + if( years == 100 ) + { + century = century + 100; + years = 0; + } + } + + if( timeCounterTemp >= SecondsInYear ) + { + if( ( years == 0 ) || ( years % 4 ) == 0 ) + { + // Nothing to be done + } + else + { + timeCounterTemp -= SecondsInYear; + years++; + } + } + + if( ( years == 0 ) || ( years % 4 ) == 0 ) + { + while( timeCounterTemp >= ( DaysInMonthLeapYear[ months - 1 ] * SecondsInDay ) ) + { + timeCounterTemp -= DaysInMonthLeapYear[ months - 1 ] * SecondsInDay; + months++; + } + } + else + { + while( timeCounterTemp >= ( DaysInMonth[ months - 1 ] * SecondsInDay ) ) + { + timeCounterTemp -= DaysInMonth[ months - 1 ] * SecondsInDay; + months++; + } + } + + // Convert milliseconds to RTC format and add to now + while( timeCounterTemp >= SecondsInDay ) + { + timeCounterTemp -= SecondsInDay; + days++; + } + + // Calculate hours + while( timeCounterTemp >= SecondsInHour ) + { + timeCounterTemp -= SecondsInHour; + hours++; + } + + // Calculate minutes + while( timeCounterTemp >= SecondsInMinute ) + { + timeCounterTemp -= SecondsInMinute; + minutes++; + } + + // Calculate seconds + seconds = round( timeCounterTemp ); + + calendar.CalendarTime.Seconds = seconds; + calendar.CalendarTime.Minutes = minutes; + calendar.CalendarTime.Hours = hours; + calendar.CalendarDate.Date = days; + calendar.CalendarDate.Month = months; + calendar.CalendarDate.Year = years; + calendar.CalendarCentury = century; + + return calendar; +} + +static TimerTime_t RtcConvertCalendarTickToTimerTime( RtcCalendar_t *calendar ) +{ + TimerTime_t timeCounter = 0; + RtcCalendar_t now; + double timeCounterTemp = 0.0; + + // Passing a NULL pointer will compute from "now" else, + // compute from the given calendar value + if( calendar == NULL ) + { + now = RtcGetCalendar( ); + } + else + { + now = *calendar; + } + + // Years (calculation valid up to year 2099) + for( int16_t i = 0; i < ( now.CalendarDate.Year + now.CalendarCentury ); i++ ) + { + if( ( i == 0 ) || ( i % 4 ) == 0 ) + { + timeCounterTemp += ( double )SecondsInLeapYear; + } + else + { + timeCounterTemp += ( double )SecondsInYear; + } + } + + // Months (calculation valid up to year 2099)*/ + if( ( now.CalendarDate.Year == 0 ) || ( ( now.CalendarDate.Year + now.CalendarCentury ) % 4 ) == 0 ) + { + for( uint8_t i = 0; i < ( now.CalendarDate.Month - 1 ); i++ ) + { + timeCounterTemp += ( double )( DaysInMonthLeapYear[i] * SecondsInDay ); + } + } + else + { + for( uint8_t i = 0; i < ( now.CalendarDate.Month - 1 ); i++ ) + { + timeCounterTemp += ( double )( DaysInMonth[i] * SecondsInDay ); + } + } + + timeCounterTemp += ( double )( ( uint32_t )now.CalendarTime.Seconds + + ( ( uint32_t )now.CalendarTime.Minutes * SecondsInMinute ) + + ( ( uint32_t )now.CalendarTime.Hours * SecondsInHour ) + + ( ( uint32_t )( now.CalendarDate.Date * SecondsInDay ) ) ); + + timeCounterTemp = ( double )timeCounterTemp * RTC_ALARM_TICK_DURATION; + + timeCounter = round( timeCounterTemp ); + return ( timeCounter ); +} + +static void RtcCheckCalendarRollOver( uint8_t year ) +{ + if( year == 99 ) + { + CalendarRollOverReady = true; + } + + if( ( CalendarRollOverReady == true ) && ( ( year + Century ) == Century ) ) + { // Indicate a roll-over of the calendar + CalendarRollOverReady = false; + Century = Century + 100; + } +} + +static RtcCalendar_t RtcGetCalendar( void ) +{ + RtcCalendar_t calendar; + HAL_RTC_GetTime( &RtcHandle, &calendar.CalendarTime, RTC_FORMAT_BIN ); + HAL_RTC_GetDate( &RtcHandle, &calendar.CalendarDate, RTC_FORMAT_BIN ); + calendar.CalendarCentury = Century; + RtcCheckCalendarRollOver( calendar.CalendarDate.Year ); + return calendar; +} + +/*! + * \brief RTC IRQ Handler of the RTC Alarm + */ +void RTC_Alarm_IRQHandler( void ) +{ + HAL_RTC_AlarmIRQHandler( &RtcHandle ); + HAL_RTC_DeactivateAlarm( &RtcHandle, RTC_ALARM_A ); + RtcRecoverMcuStatus( ); + RtcComputeWakeUpTime( ); + BlockLowPowerDuringTask( false ); + TimerIrqHandler( ); +} diff --git a/src/RAK811BreakBoard/rtc-board.h b/src/RAK811BreakBoard/rtc-board.h new file mode 100755 index 0000000..8e8d966 --- /dev/null +++ b/src/RAK811BreakBoard/rtc-board.h @@ -0,0 +1,96 @@ +/* + / _____) _ | | +( (____ _____ ____ _| |_ _____ ____| |__ + \____ \| ___ | (_ _) ___ |/ ___) _ \ + _____) ) ____| | | || |_| ____( (___| | | | +(______/|_____)_|_|_| \__)_____)\____)_| |_| + (C)2013 Semtech + +Description: MCU RTC timer and low power modes management + +License: Revised BSD License, see LICENSE.TXT file include in the project + +Maintainer: Miguel Luis and Gregory Cristian +*/ +#ifndef __RTC_BOARD_H__ +#define __RTC_BOARD_H__ + +/*! + * \brief Timer time variable definition + */ +#ifndef TimerTime_t +typedef uint32_t TimerTime_t; +#endif + +/*! + * \brief Initializes the RTC timer + * + * \remark The timer is based on the RTC + */ +void RtcInit( void ); + +/*! + * \brief Start the RTC timer + * + * \remark The timer is based on the RTC Alarm running at 32.768KHz + * + * \param[IN] timeout Duration of the Timer + */ +void RtcSetTimeout( uint32_t timeout ); + +/*! + * \brief Adjust the value of the timeout to handle wakeup time from Alarm and GPIO irq + * + * \param[IN] timeout Duration of the Timer without compensation for wakeup time + * \retval new value for the Timeout with compensations + */ +TimerTime_t RtcGetAdjustedTimeoutValue( uint32_t timeout ); + +/*! + * \brief Get the RTC timer value + * + * \retval RTC Timer value + */ +TimerTime_t RtcGetTimerValue( void ); + +/*! + * \brief Get the RTC timer elapsed time since the last Alarm was set + * + * \retval RTC Elapsed time since the last alarm + */ +TimerTime_t RtcGetElapsedAlarmTime( void ); + +/*! + * \brief Compute the timeout time of a future event in time + * + * \param[IN] futureEventInTime Value in time + * \retval time Time between now and the futureEventInTime + */ +TimerTime_t RtcComputeFutureEventTime( TimerTime_t futureEventInTime ); + +/*! + * \brief Compute the elapsed time since a fix event in time + * + * \param[IN] eventInTime Value in time + * \retval elapsed Time since the eventInTime + */ +TimerTime_t RtcComputeElapsedTime( TimerTime_t eventInTime ); + +/*! + * \brief This function blocks the MCU from going into Low Power mode + * + * \param [IN] status [true: Enable, false: Disable + */ +void BlockLowPowerDuringTask ( bool status ); + +/*! + * \brief Sets the MCU into low power STOP mode + */ +void RtcEnterLowPowerStopMode( void ); + +/*! + * \brief Restore the MCU to its normal operation mode + */ +void RtcRecoverMcuStatus( void ); + +#endif // __RTC_BOARD_H__ diff --git a/src/RAK811BreakBoard/spi-board.c b/src/RAK811BreakBoard/spi-board.c new file mode 100755 index 0000000..c2de1d0 --- /dev/null +++ b/src/RAK811BreakBoard/spi-board.c @@ -0,0 +1,173 @@ +/* + / _____) _ | | +( (____ _____ ____ _| |_ _____ ____| |__ + \____ \| ___ | (_ _) ___ |/ ___) _ \ + _____) ) ____| | | || |_| ____( (___| | | | +(______/|_____)_|_|_| \__)_____)\____)_| |_| + (C)2013 Semtech + +Description: Bleeper board SPI driver implementation + +License: Revised BSD License, see LICENSE.TXT file include in the project + +Maintainer: Miguel Luis and Gregory Cristian +*/ +#include "board.h" +#include "spi-board.h" +#include "stm32l1xx_hal_spi.h" + +/*! + * MCU SPI peripherals enumeration + */ +typedef enum +{ + SPI_1 = ( uint32_t )SPI1_BASE, + SPI_2 = ( uint32_t )SPI2_BASE, +}SPIName; + +void SpiInit( Spi_t *obj, PinNames mosi, PinNames miso, PinNames sclk, PinNames nss ) +{ + BoardDisableIrq( ); + + // Choose SPI interface according to the given pins + if( mosi == PA_7 ) + { + __HAL_RCC_SPI1_FORCE_RESET( ); + __HAL_RCC_SPI1_RELEASE_RESET( ); + + __HAL_RCC_SPI1_CLK_ENABLE( ); + + obj->Spi.Instance = ( SPI_TypeDef* )SPI1_BASE; + + GpioInit( &obj->Mosi, mosi, PIN_ALTERNATE_FCT, PIN_PUSH_PULL, PIN_PULL_DOWN, GPIO_AF5_SPI1 ); + GpioInit( &obj->Miso, miso, PIN_ALTERNATE_FCT, PIN_PUSH_PULL, PIN_PULL_DOWN, GPIO_AF5_SPI1 ); + GpioInit( &obj->Sclk, sclk, PIN_ALTERNATE_FCT, PIN_PUSH_PULL, PIN_PULL_DOWN, GPIO_AF5_SPI1 ); + GpioInit( &obj->Nss, nss, PIN_ALTERNATE_FCT, PIN_PUSH_PULL, PIN_PULL_UP, GPIO_AF5_SPI1 ); + + if( nss == NC ) + { + obj->Spi.Init.NSS = SPI_NSS_SOFT; + SpiFormat( obj, SPI_DATASIZE_8BIT, SPI_POLARITY_LOW, SPI_PHASE_1EDGE, 0 ); + } + else + { + SpiFormat( obj, SPI_DATASIZE_8BIT, SPI_POLARITY_LOW, SPI_PHASE_1EDGE, 1 ); + } + } + else if( mosi == PB_15 ) + { + __HAL_RCC_SPI2_FORCE_RESET( ); + __HAL_RCC_SPI2_RELEASE_RESET( ); + + __HAL_RCC_SPI2_CLK_ENABLE( ); + + obj->Spi.Instance = ( SPI_TypeDef* )SPI2_BASE; + + GpioInit( &obj->Mosi, mosi, PIN_ALTERNATE_FCT, PIN_PUSH_PULL, PIN_PULL_DOWN, GPIO_AF5_SPI2 ); + GpioInit( &obj->Miso, miso, PIN_ALTERNATE_FCT, PIN_PUSH_PULL, PIN_PULL_DOWN, GPIO_AF5_SPI2 ); + GpioInit( &obj->Sclk, sclk, PIN_ALTERNATE_FCT, PIN_PUSH_PULL, PIN_PULL_DOWN, GPIO_AF5_SPI2 ); + GpioInit( &obj->Nss, nss, PIN_ALTERNATE_FCT, PIN_PUSH_PULL, PIN_PULL_UP, GPIO_AF5_SPI2 ); + + if( nss == NC ) + { + obj->Spi.Init.NSS = SPI_NSS_SOFT; + SpiFormat( obj, SPI_DATASIZE_8BIT, SPI_POLARITY_LOW, SPI_PHASE_1EDGE, 0 ); + } + else + { + SpiFormat( obj, SPI_DATASIZE_8BIT, SPI_POLARITY_LOW, SPI_PHASE_1EDGE, 1 ); + } + } + SpiFrequency( obj, 10000000 ); + + HAL_SPI_Init( &obj->Spi ); + + BoardEnableIrq( ); +} + +void SpiDeInit( Spi_t *obj ) +{ + HAL_SPI_DeInit( &obj->Spi ); + + GpioInit( &obj->Mosi, obj->Mosi.pin, PIN_OUTPUT, PIN_PUSH_PULL, PIN_NO_PULL, 0 ); + GpioInit( &obj->Miso, obj->Miso.pin, PIN_OUTPUT, PIN_PUSH_PULL, PIN_PULL_DOWN, 0 ); + GpioInit( &obj->Sclk, obj->Sclk.pin, PIN_OUTPUT, PIN_PUSH_PULL, PIN_NO_PULL, 0 ); + GpioInit( &obj->Nss, obj->Nss.pin, PIN_OUTPUT, PIN_PUSH_PULL, PIN_PULL_UP, 1 ); +} + +void SpiFormat( Spi_t *obj, int8_t bits, int8_t cpol, int8_t cpha, int8_t slave ) +{ + obj->Spi.Init.Direction = SPI_DIRECTION_2LINES; + if( bits == SPI_DATASIZE_8BIT ) + { + obj->Spi.Init.DataSize = SPI_DATASIZE_8BIT; + } + else + { + obj->Spi.Init.DataSize = SPI_DATASIZE_16BIT; + } + obj->Spi.Init.CLKPolarity = cpol; + obj->Spi.Init.CLKPhase = cpha; + obj->Spi.Init.FirstBit = SPI_FIRSTBIT_MSB; + obj->Spi.Init.TIMode = SPI_TIMODE_DISABLE; + obj->Spi.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE; + obj->Spi.Init.CRCPolynomial = 7; + + if( slave == 0 ) + { + obj->Spi.Init.Mode = SPI_MODE_MASTER; + } + else + { + obj->Spi.Init.Mode = SPI_MODE_SLAVE; + } +} + +void SpiFrequency( Spi_t *obj, uint32_t hz ) +{ + uint32_t divisor = 0; + uint32_t sysClkTmp = SystemCoreClock; + uint32_t baudRate; + + while( sysClkTmp > hz ) + { + divisor++; + sysClkTmp = ( sysClkTmp >> 1 ); + + if( divisor >= 7 ) + { + break; + } + } + + baudRate =( ( ( divisor & 0x4 ) == 0 ) ? 0x0 : SPI_CR1_BR_2 ) | + ( ( ( divisor & 0x2 ) == 0 ) ? 0x0 : SPI_CR1_BR_1 ) | + ( ( ( divisor & 0x1 ) == 0 ) ? 0x0 : SPI_CR1_BR_0 ); + + obj->Spi.Init.BaudRatePrescaler = baudRate; +} + +uint16_t SpiInOut( Spi_t *obj, uint16_t outData ) +{ + uint8_t rxData = 0; + + if( ( obj == NULL ) || ( obj->Spi.Instance ) == NULL ) + { + assert_param( FAIL ); + } + + __HAL_SPI_ENABLE( &obj->Spi ); + + BoardDisableIrq( ); + + while( __HAL_SPI_GET_FLAG( &obj->Spi, SPI_FLAG_TXE ) == RESET ); + obj->Spi.Instance->DR = ( uint16_t ) ( outData & 0xFF ); + + while( __HAL_SPI_GET_FLAG( &obj->Spi, SPI_FLAG_RXNE ) == RESET ); + rxData = ( uint16_t ) obj->Spi.Instance->DR; + + BoardEnableIrq( ); + + return( rxData ); +} + diff --git a/src/RAK811BreakBoard/spi-board.h b/src/RAK811BreakBoard/spi-board.h new file mode 100755 index 0000000..2bba256 --- /dev/null +++ b/src/RAK811BreakBoard/spi-board.h @@ -0,0 +1,30 @@ +/* + / _____) _ | | +( (____ _____ ____ _| |_ _____ ____| |__ + \____ \| ___ | (_ _) ___ |/ ___) _ \ + _____) ) ____| | | || |_| ____( (___| | | | +(______/|_____)_|_|_| \__)_____)\____)_| |_| + (C)2013 Semtech + +Description: Bleeper board SPI driver implementation + +License: Revised BSD License, see LICENSE.TXT file include in the project + +Maintainer: Miguel Luis and Gregory Cristian +*/ +#ifndef __SPI_MCU_H__ +#define __SPI_MCU_H__ + +/*! + * SPI driver structure definition + */ +struct Spi_s +{ + SPI_HandleTypeDef Spi; + Gpio_t Mosi; + Gpio_t Miso; + Gpio_t Sclk; + Gpio_t Nss; +}; + +#endif // __SPI_MCU_H__ diff --git a/src/RAK811BreakBoard/sx1276-board.c b/src/RAK811BreakBoard/sx1276-board.c new file mode 100755 index 0000000..9d7495c --- /dev/null +++ b/src/RAK811BreakBoard/sx1276-board.c @@ -0,0 +1,227 @@ +/* + / _____) _ | | +( (____ _____ ____ _| |_ _____ ____| |__ + \____ \| ___ | (_ _) ___ |/ ___) _ \ + _____) ) ____| | | || |_| ____( (___| | | | +(______/|_____)_|_|_| \__)_____)\____)_| |_| + (C)2013 Semtech + +Description: SX1276 driver specific target board functions implementation + +License: Revised BSD License, see LICENSE.TXT file include in the project + +Maintainer: Miguel Luis and Gregory Cristian +*/ +#include "board.h" +#include "radio.h" +#include "sx1276/sx1276.h" +#include "sx1276-board.h" + +/*! + * Flag used to set the RF switch control pins in low power mode when the radio is not active. + */ +static bool RadioIsActive = false; + +/*! + * Radio driver structure initialization + */ +const struct Radio_s Radio = +{ + SX1276Init, + SX1276GetStatus, + SX1276SetModem, + SX1276SetChannel, + SX1276IsChannelFree, + SX1276Random, + SX1276SetRxConfig, + SX1276SetTxConfig, + SX1276CheckRfFrequency, + SX1276GetTimeOnAir, + SX1276Send, + SX1276SetSleep, + SX1276SetStby, + SX1276SetRx, + SX1276StartCad, + SX1276SetTxContinuousWave, + SX1276ReadRssi, + SX1276Write, + SX1276Read, + SX1276WriteBuffer, + SX1276ReadBuffer, + SX1276SetMaxPayloadLength, + SX1276SetPublicNetwork +}; + +/*! + * Antenna switch GPIO pins objects + */ +Gpio_t AntCtxPa; +Gpio_t AntCbtHf; +Gpio_t AntCrxRx; + +void SX1276IoInit( void ) +{ + GpioInit( &SX1276.Spi.Nss, RADIO_NSS, PIN_OUTPUT, PIN_PUSH_PULL, PIN_PULL_UP, 1 ); + + GpioInit( &SX1276.DIO0, RADIO_DIO_0, PIN_INPUT, PIN_PUSH_PULL, PIN_PULL_UP, 0 ); + GpioInit( &SX1276.DIO1, RADIO_DIO_1, PIN_INPUT, PIN_PUSH_PULL, PIN_PULL_UP, 0 ); + GpioInit( &SX1276.DIO2, RADIO_DIO_2, PIN_INPUT, PIN_PUSH_PULL, PIN_PULL_UP, 0 ); + GpioInit( &SX1276.DIO3, RADIO_DIO_3, PIN_INPUT, PIN_PUSH_PULL, PIN_PULL_UP, 0 ); + GpioInit( &SX1276.DIO4, RADIO_DIO_4, PIN_INPUT, PIN_PUSH_PULL, PIN_PULL_UP, 0 ); +} + +void SX1276IoIrqInit( DioIrqHandler **irqHandlers ) +{ + GpioSetInterrupt( &SX1276.DIO0, IRQ_RISING_EDGE, IRQ_HIGH_PRIORITY, irqHandlers[0] ); + GpioSetInterrupt( &SX1276.DIO1, IRQ_RISING_EDGE, IRQ_HIGH_PRIORITY, irqHandlers[1] ); + GpioSetInterrupt( &SX1276.DIO2, IRQ_RISING_EDGE, IRQ_HIGH_PRIORITY, irqHandlers[2] ); + GpioSetInterrupt( &SX1276.DIO3, IRQ_RISING_EDGE, IRQ_HIGH_PRIORITY, irqHandlers[3] ); + GpioSetInterrupt( &SX1276.DIO4, IRQ_RISING_EDGE, IRQ_HIGH_PRIORITY, irqHandlers[4] ); + GpioSetInterrupt( &SX1276.DIO5, IRQ_RISING_EDGE, IRQ_HIGH_PRIORITY, irqHandlers[5] ); +} + +void SX1276IoDeInit( void ) +{ + GpioInit( &SX1276.Spi.Nss, RADIO_NSS, PIN_OUTPUT, PIN_PUSH_PULL, PIN_NO_PULL, 1 ); + + GpioInit( &SX1276.DIO0, RADIO_DIO_0, PIN_INPUT, PIN_PUSH_PULL, PIN_NO_PULL, 0 ); + GpioInit( &SX1276.DIO1, RADIO_DIO_1, PIN_INPUT, PIN_PUSH_PULL, PIN_NO_PULL, 0 ); + GpioInit( &SX1276.DIO2, RADIO_DIO_2, PIN_INPUT, PIN_PUSH_PULL, PIN_NO_PULL, 0 ); + GpioInit( &SX1276.DIO3, RADIO_DIO_3, PIN_INPUT, PIN_PUSH_PULL, PIN_NO_PULL, 0 ); + GpioInit( &SX1276.DIO4, RADIO_DIO_4, PIN_INPUT, PIN_PUSH_PULL, PIN_NO_PULL, 0 ); +} + +void SX1276SetRfTxPower( int8_t power ) +{ + uint8_t paConfig = 0; + uint8_t paDac = 0; + + paConfig = SX1276Read( REG_PACONFIG ); + paDac = SX1276Read( REG_PADAC ); + + paConfig = ( paConfig & RF_PACONFIG_PASELECT_MASK ) | SX1276GetPaSelect( SX1276.Settings.Channel ); + paConfig = ( paConfig & RF_PACONFIG_MAX_POWER_MASK ) | 0x70; + + if( ( paConfig & RF_PACONFIG_PASELECT_PABOOST ) == RF_PACONFIG_PASELECT_PABOOST ) + { + if( power > 17 ) + { + paDac = ( paDac & RF_PADAC_20DBM_MASK ) | RF_PADAC_20DBM_ON; + } + else + { + paDac = ( paDac & RF_PADAC_20DBM_MASK ) | RF_PADAC_20DBM_OFF; + } + if( ( paDac & RF_PADAC_20DBM_ON ) == RF_PADAC_20DBM_ON ) + { + if( power < 5 ) + { + power = 5; + } + if( power > 20 ) + { + power = 20; + } + paConfig = ( paConfig & RF_PACONFIG_OUTPUTPOWER_MASK ) | ( uint8_t )( ( uint16_t )( power - 5 ) & 0x0F ); + } + else + { + if( power < 2 ) + { + power = 2; + } + if( power > 17 ) + { + power = 17; + } + paConfig = ( paConfig & RF_PACONFIG_OUTPUTPOWER_MASK ) | ( uint8_t )( ( uint16_t )( power - 2 ) & 0x0F ); + } + } + else + { + if( power < -1 ) + { + power = -1; + } + if( power > 14 ) + { + power = 14; + } + paConfig = ( paConfig & RF_PACONFIG_OUTPUTPOWER_MASK ) | ( uint8_t )( ( uint16_t )( power + 1 ) & 0x0F ); + } + SX1276Write( REG_PACONFIG, paConfig ); + SX1276Write( REG_PADAC, paDac ); +} + +uint8_t SX1276GetPaSelect( uint32_t channel ) +{ +// if( channel < RF_MID_BAND_THRESH ) +// { +// return RF_PACONFIG_PASELECT_PABOOST; +// } +// else +// { +// return RF_PACONFIG_PASELECT_RFO; +// } + + return RF_PACONFIG_PASELECT_PABOOST; +} + +void SX1276SetAntSwLowPower( bool status ) +{ + if( RadioIsActive != status ) + { + RadioIsActive = status; + + if( status == false ) + { + SX1276AntSwInit( ); + } + else + { + SX1276AntSwDeInit( ); + } + } +} + +void SX1276AntSwInit( void ) +{ + GpioInit( &AntCtxPa, RADIO_RF_CTX_PA, PIN_OUTPUT, PIN_PUSH_PULL, PIN_PULL_UP, 0 ); + GpioInit( &AntCbtHf, RADIO_RF_CBT_HF, PIN_OUTPUT, PIN_PUSH_PULL, PIN_PULL_UP, 0 ); + GpioInit( &AntCrxRx, RADIO_RF_CRX_RX, PIN_OUTPUT, PIN_PUSH_PULL, PIN_PULL_UP, 0 ); +} + +void SX1276AntSwDeInit( void ) +{ + GpioInit( &AntCtxPa, RADIO_RF_CTX_PA, PIN_OUTPUT, PIN_OPEN_DRAIN, PIN_NO_PULL, 0 ); + GpioInit( &AntCbtHf, RADIO_RF_CBT_HF, PIN_OUTPUT, PIN_OPEN_DRAIN, PIN_NO_PULL, 0 ); + GpioInit( &AntCrxRx, RADIO_RF_CRX_RX, PIN_OUTPUT, PIN_OPEN_DRAIN, PIN_NO_PULL, 0 ); +} + +void SX1276SetAntSw( uint8_t opMode ) +{ + switch( opMode ) + { + case RFLR_OPMODE_TRANSMITTER: + GpioWrite( &AntCtxPa, 1 ); + GpioWrite( &AntCbtHf, 0 ); + GpioWrite( &AntCrxRx, 0 ); + //printf("-Tx-\r\n"); + break; + case RFLR_OPMODE_RECEIVER: + case RFLR_OPMODE_RECEIVER_SINGLE: + case RFLR_OPMODE_CAD: + default: + GpioWrite( &AntCtxPa, 0 ); + GpioWrite( &AntCbtHf, 0 ); + GpioWrite( &AntCrxRx, 1 ); + //printf("-Rx-\r\n"); + break; + } +} + +bool SX1276CheckRfFrequency( uint32_t frequency ) +{ + // Implement check. Currently all frequencies are supported + return true; +} diff --git a/src/RAK811BreakBoard/sx1276-board.h b/src/RAK811BreakBoard/sx1276-board.h new file mode 100755 index 0000000..e89ae0a --- /dev/null +++ b/src/RAK811BreakBoard/sx1276-board.h @@ -0,0 +1,120 @@ +/* + / _____) _ | | +( (____ _____ ____ _| |_ _____ ____| |__ + \____ \| ___ | (_ _) ___ |/ ___) _ \ + _____) ) ____| | | || |_| ____( (___| | | | +(______/|_____)_|_|_| \__)_____)\____)_| |_| + (C)2013 Semtech + +Description: SX1276 driver specific target board functions implementation + +License: Revised BSD License, see LICENSE.TXT file include in the project + +Maintainer: Miguel Luis and Gregory Cristian +*/ +#ifndef __SX1276_ARCH_H__ +#define __SX1276_ARCH_H__ + +/*! + * \brief Radio hardware registers initialization definition + * + * \remark Can be automatically generated by the SX1276 GUI (not yet implemented) + */ +#define RADIO_INIT_REGISTERS_VALUE \ +{ \ + { MODEM_FSK , REG_LNA , 0x23 },\ + { MODEM_FSK , REG_RXCONFIG , 0x1E },\ + { MODEM_FSK , REG_RSSICONFIG , 0xD2 },\ + { MODEM_FSK , REG_AFCFEI , 0x01 },\ + { MODEM_FSK , REG_PREAMBLEDETECT , 0xAA },\ + { MODEM_FSK , REG_OSC , 0x07 },\ + { MODEM_FSK , REG_SYNCCONFIG , 0x12 },\ + { MODEM_FSK , REG_SYNCVALUE1 , 0xC1 },\ + { MODEM_FSK , REG_SYNCVALUE2 , 0x94 },\ + { MODEM_FSK , REG_SYNCVALUE3 , 0xC1 },\ + { MODEM_FSK , REG_PACKETCONFIG1 , 0xD8 },\ + { MODEM_FSK , REG_FIFOTHRESH , 0x8F },\ + { MODEM_FSK , REG_IMAGECAL , 0x02 },\ + { MODEM_FSK , REG_DIOMAPPING1 , 0x00 },\ + { MODEM_FSK , REG_DIOMAPPING2 , 0x30 },\ + { MODEM_LORA, REG_LR_PAYLOADMAXLENGTH, 0x40 },\ +} \ + +#define RF_MID_BAND_THRESH 525000000 + +/*! + * \brief Initializes the radio I/Os pins interface + */ +void SX1276IoInit( void ); + +/*! + * \brief Initializes DIO IRQ handlers + * + * \param [IN] irqHandlers Array containing the IRQ callback functions + */ +void SX1276IoIrqInit( DioIrqHandler **irqHandlers ); + +/*! + * \brief De-initializes the radio I/Os pins interface. + * + * \remark Useful when going in MCU low power modes + */ +void SX1276IoDeInit( void ); + +/*! + * \brief Sets the radio output power. + * + * \param [IN] power Sets the RF output power + */ +void SX1276SetRfTxPower( int8_t power ); + +/*! + * \brief Gets the board PA selection configuration + * + * \param [IN] channel Channel frequency in Hz + * \retval PaSelect RegPaConfig PaSelect value + */ +uint8_t SX1276GetPaSelect( uint32_t channel ); + +/*! + * \brief Set the RF Switch I/Os pins in Low Power mode + * + * \param [IN] status enable or disable + */ +void SX1276SetAntSwLowPower( bool status ); + +/*! + * \brief Initializes the RF Switch I/Os pins interface + */ +void SX1276AntSwInit( void ); + +/*! + * \brief De-initializes the RF Switch I/Os pins interface + * + * \remark Needed to decrease the power consumption in MCU low power modes + */ +void SX1276AntSwDeInit( void ); + +/*! + * \brief Controls the antenna switch if necessary. + * + * \remark see errata note + * + * \param [IN] opMode Current radio operating mode + */ +void SX1276SetAntSw( uint8_t opMode ); + +/*! + * \brief Checks if the given RF frequency is supported by the hardware + * + * \param [IN] frequency RF frequency to be checked + * \retval isSupported [true: supported, false: unsupported] + */ +bool SX1276CheckRfFrequency( uint32_t frequency ); + +/*! + * Radio hardware and global parameters + */ +extern SX1276_t SX1276; + +#endif // __SX1276_ARCH_H__ diff --git a/src/RAK811BreakBoard/uart-board.c b/src/RAK811BreakBoard/uart-board.c new file mode 100755 index 0000000..c03f22e --- /dev/null +++ b/src/RAK811BreakBoard/uart-board.c @@ -0,0 +1,357 @@ +/* + / _____) _ | | +( (____ _____ ____ _| |_ _____ ____| |__ + \____ \| ___ | (_ _) ___ |/ ___) _ \ + _____) ) ____| | | || |_| ____( (___| | | | +(______/|_____)_|_|_| \__)_____)\____)_| |_| + (C)2016 Semtech + +Description: Board UART driver implementation + +License: Revised BSD License, see LICENSE.TXT file include in the project + +Maintainer: Miguel Luis and Gregory Cristian +*/ +#include +#include "board.h" + +#include "uart-board.h" + +//uint8_t RxData = 0; + +/*! + * FIFO buffers size + */ +#define FIFO_RX_SIZE 512 + +uint8_t UART_RxBuffer[FIFO_RX_SIZE]; +uint8_t GPS_RxBuffer[FIFO_RX_SIZE]; + +typedef struct +{ + UART_HandleTypeDef UartHandle; + uint8_t RxData; + uint8_t TxData; +} UartContext_t; + +UartContext_t UartContext[UART_COUNT]; + +void UartMcuInit( Uart_t *obj, uint8_t uartId, PinNames tx, PinNames rx ) +{ + obj->UartId = uartId; + + if ( obj->UartId == UART_1 ) + { + __HAL_RCC_USART1_FORCE_RESET( ); + __HAL_RCC_USART1_RELEASE_RESET( ); + __HAL_RCC_USART1_CLK_ENABLE( ); + + GpioInit( &obj->Tx, tx, PIN_ALTERNATE_FCT, PIN_PUSH_PULL, PIN_PULL_UP, GPIO_AF7_USART1 ); + GpioInit( &obj->Rx, rx, PIN_ALTERNATE_FCT, PIN_PUSH_PULL, PIN_PULL_UP, GPIO_AF7_USART1 ); + } + else if( obj->UartId == UART_3 ) + { + __HAL_RCC_USART3_FORCE_RESET( ); + __HAL_RCC_USART3_RELEASE_RESET( ); + __HAL_RCC_USART3_CLK_ENABLE( ); + + GpioInit( &obj->Tx, tx, PIN_ALTERNATE_FCT, PIN_PUSH_PULL, PIN_PULL_UP, GPIO_AF7_USART3 ); + GpioInit( &obj->Rx, rx, PIN_ALTERNATE_FCT, PIN_PUSH_PULL, PIN_PULL_UP, GPIO_AF7_USART3 ); + } +} + +void UartMcuConfig( Uart_t *obj, UartMode_t mode, uint32_t baudrate, WordLength_t wordLength, StopBits_t stopBits, Parity_t parity, FlowCtrl_t flowCtrl ) +{ + UART_HandleTypeDef * handle = &UartContext[obj->UartId].UartHandle; + IRQn_Type irq; + + //FifoInit( &obj->FifoTx, TxBuffer, FIFO_TX_SIZE ); + + if( obj->UartId == UART_1 ) + { + handle->Instance = USART1; + irq = USART1_IRQn; + FifoInit( &obj->FifoRx, UART_RxBuffer, FIFO_RX_SIZE ); + } + else if( obj->UartId == UART_3 ) + { + handle->Instance = USART3; + irq = USART3_IRQn; + FifoInit( &GpsUart.FifoRx, GPS_RxBuffer, FIFO_RX_SIZE ); + } + else + return; + + handle->Init.BaudRate = baudrate; + + if( mode == TX_ONLY ) + { + if( obj->FifoTx.Data == NULL ) + { + assert_param( FAIL ); + } + handle->Init.Mode = UART_MODE_TX; + } + else if( mode == RX_ONLY ) + { + if( obj->FifoRx.Data == NULL ) + { + assert_param( FAIL ); + } + handle->Init.Mode = UART_MODE_RX; + } + else if( mode == RX_TX ) + { + if( ( obj->FifoTx.Data == NULL ) || ( obj->FifoRx.Data == NULL ) ) + { + assert_param( FAIL ); + } + handle->Init.Mode = UART_MODE_TX_RX; + } + else + { + assert_param( FAIL ); + } + + if( wordLength == UART_8_BIT ) + { + handle->Init.WordLength = UART_WORDLENGTH_8B; + } + else if( wordLength == UART_9_BIT ) + { + handle->Init.WordLength = UART_WORDLENGTH_9B; + } + + switch( stopBits ) + { + case UART_2_STOP_BIT: + handle->Init.StopBits = UART_STOPBITS_2; + break; + case UART_1_STOP_BIT: + default: + handle->Init.StopBits = UART_STOPBITS_1; + break; + } + + if( parity == NO_PARITY ) + { + handle->Init.Parity = UART_PARITY_NONE; + } + else if( parity == EVEN_PARITY ) + { + handle->Init.Parity = UART_PARITY_EVEN; + } + else + { + handle->Init.Parity = UART_PARITY_ODD; + } + + if( flowCtrl == NO_FLOW_CTRL ) + { + handle->Init.HwFlowCtl = UART_HWCONTROL_NONE; + } + else if( flowCtrl == RTS_FLOW_CTRL ) + { + handle->Init.HwFlowCtl = UART_HWCONTROL_RTS; + } + else if( flowCtrl == CTS_FLOW_CTRL ) + { + handle->Init.HwFlowCtl = UART_HWCONTROL_CTS; + } + else if( flowCtrl == RTS_CTS_FLOW_CTRL ) + { + handle->Init.HwFlowCtl = UART_HWCONTROL_RTS_CTS; + } + + handle->Init.OverSampling = UART_OVERSAMPLING_16; + + if( HAL_UART_Init( handle ) != HAL_OK ) + { + while( 1 ); + } + + HAL_NVIC_SetPriority( irq, 8, 0 ); + HAL_NVIC_EnableIRQ( irq ); + + /* Enable the UART Data Register not empty Interrupt */ + HAL_UART_Receive_IT( handle, &UartContext[obj->UartId].RxData, 1 ); +} + +void UartMcuDeInit( Uart_t *obj ) +{ + if ( obj->UartId == UART_1 ) + { + __HAL_RCC_USART1_FORCE_RESET( ); + __HAL_RCC_USART1_RELEASE_RESET( ); + __HAL_RCC_USART1_CLK_DISABLE( ); + } + else if( obj->UartId == UART_3 ) + { + __HAL_RCC_USART3_FORCE_RESET( ); + __HAL_RCC_USART3_RELEASE_RESET( ); + __HAL_RCC_USART3_CLK_DISABLE( ); + } + + GpioInit( &obj->Tx, obj->Tx.pin, PIN_ANALOGIC, PIN_PUSH_PULL, PIN_NO_PULL, 0 ); + GpioInit( &obj->Rx, obj->Rx.pin, PIN_ANALOGIC, PIN_PUSH_PULL, PIN_NO_PULL, 0 ); +} + +uint8_t UartMcuPutChar( Uart_t *obj, uint8_t data ) +{ + if( IsFifoFull( &obj->FifoTx ) == false ) + { + BoardDisableIrq( ); + FifoPush( &obj->FifoTx, data ); + BoardEnableIrq( ); + // Trig UART Tx interrupt to start sending the FIFO contents. + __HAL_UART_ENABLE_IT( &UartContext[UART_1].UartHandle, USART_IT_TXE ); + return 0; // OK + } + + return 1; // Busy +} + +uint8_t UartMcuGetChar( Uart_t *obj, uint8_t *data ) +{ + BoardDisableIrq( ); + if( IsFifoEmpty( &obj->FifoRx ) == false ) + { + *data = FifoPop( &obj->FifoRx ); + BoardEnableIrq( ); + return 0; + } + + BoardEnableIrq( ); + return 1; +} + +void HAL_UART_TxCpltCallback( UART_HandleTypeDef *handle ) +{ + uint8_t data; + + if( IsFifoEmpty( &Uart1.FifoTx ) == false ) + { + data = FifoPop( &Uart1.FifoTx ); + // Write one byte to the transmit data register + HAL_UART_Transmit_IT( handle, &data, 1 ); + } + else + { + // Disable the USART Transmit interrupt + HAL_NVIC_DisableIRQ( USART1_IRQn ); + } + if( Uart1.IrqNotify != NULL ) + { + Uart1.IrqNotify( UART_NOTIFY_TX ); + } +} + +void HAL_UART_RxCpltCallback( UART_HandleTypeDef *handle ) +{ + Uart_t *uart = &Uart1; + UartId_t uartId = UART_1; + + if( handle == &UartContext[UART_1].UartHandle ) + { + uart = &Uart1; + uartId = UART_1; + } + else if( handle == &UartContext[UART_3].UartHandle ) + { + uart = &GpsUart; + uartId = UART_3; + } + else // Unknown UART peripheral skip processing + return; + + if( IsFifoFull( &uart->FifoRx ) == false ) { + // Read one byte from the receive data register + FifoPush( &uart->FifoRx, UartContext[uartId].RxData ); + } + + if( uart->IrqNotify != NULL ) + uart->IrqNotify( UART_NOTIFY_RX ); + + //__HAL_UART_FLUSH_DRREGISTER( handle ); + HAL_UART_Receive_IT( &UartContext[uartId].UartHandle, &UartContext[uartId].RxData, 1 ); +} + +void HAL_UART_ErrorCallback( UART_HandleTypeDef *handle ) +{ + UartId_t uartId = UART_1; + + if( handle == &UartContext[UART_1].UartHandle ) + uartId = UART_1; + else if( handle == &UartContext[UART_3].UartHandle ) + uartId = UART_3; + else // Unknown UART peripheral skip processing + return; + + HAL_UART_Receive_IT( &UartContext[uartId].UartHandle, &UartContext[uartId].RxData, 1 ); +} + +void USART1_IRQHandler( void ) +{ + HAL_UART_IRQHandler( &UartContext[UART_1].UartHandle ); +} + +void USART3_IRQHandler( void ) +{ + // [BEGIN] Workaround to solve an issue with the HAL drivers not managin the uart state correctly. + uint32_t tmpFlag = 0, tmpItSource = 0; + + tmpFlag = __HAL_UART_GET_FLAG( &UartContext[UART_3].UartHandle, UART_FLAG_TC ); + tmpItSource = __HAL_UART_GET_IT_SOURCE( &UartContext[UART_3].UartHandle, UART_IT_TC ); + // UART in mode Transmitter end + if( ( tmpFlag != RESET ) && ( tmpItSource != RESET ) ) + { + if( ( UartContext[UART_3].UartHandle.State == HAL_UART_STATE_BUSY_RX ) || UartContext[UART_3].UartHandle.State == HAL_UART_STATE_BUSY_TX_RX ) + { + UartContext[UART_3].UartHandle.State = HAL_UART_STATE_BUSY_TX_RX; + } + } + // [END] Workaround to solve an issue with the HAL drivers not managin the uart state correctly. + + HAL_UART_IRQHandler( &UartContext[UART_3].UartHandle ); +} + +#if defined ( __CC_ARM ) + #ifdef __GNUC__ + /* With GCC/RAISONANCE, small printf (option LD Linker->Libraries->Small printf + set to 'Yes') calls __io_putchar() */ + #define PUTCHAR_PROTOTYPE int __io_putchar(int ch) + #else + #define PUTCHAR_PROTOTYPE int fputc(int ch, FILE *f) + #endif /* __GNUC__ */ + /** + * @brief Retargets the C library printf function to the USART. + * @param None + * @retval None + */ + PUTCHAR_PROTOTYPE + { + /* Place your implementation of fputc here */ + /* e.g. write a character to the EVAL_COM1 and Loop until the end of transmission */ + HAL_UART_Transmit(&UartContext[UART_1].UartHandle, (uint8_t *)&ch, 1, 0xFFFF); + /* Loop until the end of transmission */ + return ch; + } +#endif + +int e_getchar(void) +{ + int c = -1; + uint8_t data; + + if (UartMcuGetChar(&Uart1, &data) == 0) { + c = data; + } + return c; +} + +int e_printchar(char ch) +{ + HAL_UART_Transmit(&UartContext[UART_1].UartHandle, (uint8_t *)&ch, 1, 0xFFFF); +} + + diff --git a/src/RAK811BreakBoard/uart-board.h b/src/RAK811BreakBoard/uart-board.h new file mode 100755 index 0000000..61536ec --- /dev/null +++ b/src/RAK811BreakBoard/uart-board.h @@ -0,0 +1,96 @@ +/* + / _____) _ | | +( (____ _____ ____ _| |_ _____ ____| |__ + \____ \| ___ | (_ _) ___ |/ ___) _ \ + _____) ) ____| | | || |_| ____( (___| | | | +(______/|_____)_|_|_| \__)_____)\____)_| |_| + (C)2016 Semtech + +Description: Board UART driver implementation + +License: Revised BSD License, see LICENSE.TXT file include in the project + +Maintainer: Miguel Luis and Gregory Cristian +*/ +#ifndef __UART_MCU_H__ +#define __UART_MCU_H__ + +/*! + * UART peripheral ID + */ +typedef enum +{ + UART_1, + UART_3, + UART_COUNT, + UART_USB_CDC = 255, +}UartId_t; + +/*! + * \brief Initializes the UART object and MCU peripheral + * + * \param [IN] obj UART object + * \param [IN] tx UART Tx pin name to be used + * \param [IN] rx UART Rx pin name to be used + */ +void UartMcuInit( Uart_t *obj, uint8_t uartId, PinNames tx, PinNames rx ); + +/*! + * \brief Initializes the UART object and MCU peripheral + * + * \param [IN] obj UART object + * \param [IN] mode Mode of operation for the UART + * \param [IN] baudrate UART baudrate + * \param [IN] wordLength packet length + * \param [IN] stopBits stop bits setup + * \param [IN] parity packet parity + * \param [IN] flowCtrl UART flow control + */ +void UartMcuConfig( Uart_t *obj, UartMode_t mode, uint32_t baudrate, WordLength_t wordLength, StopBits_t stopBits, Parity_t parity, FlowCtrl_t flowCtrl ); + +/*! + * \brief DeInitializes the UART object and MCU peripheral + * + * \param [IN] obj UART object + */ +void UartMcuDeInit( Uart_t *obj ); + +/*! + * \brief Sends a character to the UART + * + * \param [IN] obj UART object + * \param [IN] data Character to be sent + * \retval status [0: OK, 1: Busy] + */ +uint8_t UartMcuPutChar( Uart_t *obj, uint8_t data ); + +/*! + * \brief Sends a character to the UART + * + * \param [IN] obj UART object + * \param [IN] data Characters to be sent + * \param [IN] size number of characters to send + * \retval status [0: OK, 1: Busy] + */ +uint8_t UartMcuPutBuffer( Uart_t *obj, uint8_t *data, uint16_t size ); + +/*! + * \brief Gets a character from the UART + * + * \param [IN] obj UART object + * \param [IN] data Received character + * \retval status [0: OK, 1: Busy] + */ +uint8_t UartMcuGetChar( Uart_t *obj, uint8_t *data ); + +/*! + * \brief Gets a character from the UART (blocking mode) + * + * \param [IN] obj UART object + * \param [IN] data Received character + * \param [IN] size number of characters to be received + * \retval status [0: OK, 1: Busy] + */ +uint8_t UartMcuGetBuffer( Uart_t *obj, uint8_t *data, uint16_t size ); + +#endif // __UART_MCU_H__ diff --git a/src/RAK811BreakBoard/uart-usb-board.c b/src/RAK811BreakBoard/uart-usb-board.c new file mode 100755 index 0000000..36eacc1 --- /dev/null +++ b/src/RAK811BreakBoard/uart-usb-board.c @@ -0,0 +1,112 @@ +#if 0 +/* + / _____) _ | | +( (____ _____ ____ _| |_ _____ ____| |__ + \____ \| ___ | (_ _) ___ |/ ___) _ \ + _____) ) ____| | | || |_| ____( (___| | | | +(______/|_____)_|_|_| \__)_____)\____)_| |_| + (C)2013 Semtech + +Description: Bleeper board UART driver implementation + +License: Revised BSD License, see LICENSE.TXT file include in the project + +Maintainer: Miguel Luis and Gregory Cristian +*/ +#include "board.h" + +#include "usbd_core.h" +#include "usbd_desc.h" +#include "usbd_cdc.h" +#include "usbd_cdc_if.h" +#include "uart-usb-board.h" + +/* USB handler declaration */ +/* Handle for USB Full Speed IP */ +//USBD_HandleTypeDef *hUsbDevice_0; + +USBD_HandleTypeDef hUsbDeviceFS; +extern PCD_HandleTypeDef hpcd_USB_FS; + +void UartUsbInit( Uart_t *obj, uint8_t uartId, PinNames tx, PinNames rx ) +{ + obj->UartId = uartId; + + __HAL_RCC_COMP_CLK_ENABLE( ); + __HAL_RCC_SYSCFG_CLK_ENABLE( ); + + CDC_Set_Uart_Obj( obj ); + + /* Init Device Library, Add Supported Class and Start the library */ + USBD_Init( &hUsbDeviceFS, &FS_Desc, DEVICE_FS ); + + USBD_RegisterClass( &hUsbDeviceFS, &USBD_CDC ); + + USBD_CDC_RegisterInterface( &hUsbDeviceFS, &USBD_Interface_fops_FS ); + + USBD_Start( &hUsbDeviceFS ); +} + +void UartUsbConfig( Uart_t *obj, UartMode_t mode, uint32_t baudrate, WordLength_t wordLength, StopBits_t stopBits, Parity_t parity, FlowCtrl_t flowCtrl ) +{ + +} + +void UartUsbDeInit( Uart_t *obj ) +{ + +} + +uint8_t UartUsbIsUsbCableConnected( void ) +{ + if( hUsbDeviceFS.dev_address == 0 ) + { + // USB is low Power mode meaning USB cable is not connected + return 0; + } + else + { + // USB is in active mode meaning USB cable is connected + return 1; + } +} + +uint8_t UartUsbPutBuffer( Uart_t *obj, uint8_t *buffer, uint16_t size ) +{ + return CDC_Transmit_FS( buffer, size ); +} + +uint8_t UartUsbPutChar( Uart_t *obj, uint8_t data ) +{ + return UartUsbPutBuffer( obj, &data, 1 ); +} + +uint8_t UartUsbGetChar( Uart_t *obj, uint8_t *data ) +{ + if( IsFifoEmpty( &obj->FifoRx ) == false ) + { + BoardDisableIrq( ); + *data = FifoPop( &obj->FifoRx ); + BoardEnableIrq( ); + return 0; + } + return 1; +} + +void USB_LP_IRQHandler( void ) +{ + HAL_PCD_IRQHandler( &hpcd_USB_FS ); +} + +#ifdef __GNUC__ +/* With GCC/RAISONANCE, small printf (option LD Linker->Libraries->Small printf + set to 'Yes') calls __io_putchar() */ +int __io_putchar( int c ) +#else /* __GNUC__ */ +int fputc( int c, FILE *stream ) +#endif +{ + while( UartUsbPutChar( &UartUsb, c ) != 0 ); + return c; +} +#endif \ No newline at end of file diff --git a/src/RAK811BreakBoard/uart-usb-board.h b/src/RAK811BreakBoard/uart-usb-board.h new file mode 100755 index 0000000..6f7bc53 --- /dev/null +++ b/src/RAK811BreakBoard/uart-usb-board.h @@ -0,0 +1,82 @@ +/* + / _____) _ | | +( (____ _____ ____ _| |_ _____ ____| |__ + \____ \| ___ | (_ _) ___ |/ ___) _ \ + _____) ) ____| | | || |_| ____( (___| | | | +(______/|_____)_|_|_| \__)_____)\____)_| |_| + (C)2013 Semtech + +Description: Bleeper board UART driver implementation + +License: Revised BSD License, see LICENSE.TXT file include in the project + +Maintainer: Miguel Luis and Gregory Cristian +*/ +#ifndef __UART_USB_H__ +#define __UART_USB_H__ + +/*! + * \brief Initializes the UART object and MCU peripheral + * + * \param [IN] obj UART object + * \param [IN] tx UART Tx pin name to be used + * \param [IN] rx UART Rx pin name to be used + */ +void UartUsbInit( Uart_t *obj, uint8_t uartId, PinNames tx, PinNames rx ); + +/*! + * \brief Initializes the UART object and USB peripheral + * + * \param [IN] obj UART object + * \param [IN] mode Mode of operation for the UART + * \param [IN] baudrate UART baudrate + * \param [IN] wordLength packet length + * \param [IN] stopBits stop bits setup + * \param [IN] parity packet parity + * \param [IN] flowCtrl UART flow control + */ +void UartUsbConfig( Uart_t *obj, UartMode_t mode, uint32_t baudrate, WordLength_t wordLength, StopBits_t stopBits, Parity_t parity, FlowCtrl_t flowCtrl ); + +/*! + * \brief DeInitializes the UART object and USB peripheral + * + * \param [IN] obj UART object + */ +void UartUsbDeInit( Uart_t *obj ); + +/*! + * \brief Checks if the cable is connected or not + * + * \retval connected [0: Not connected, 1: Connected] + */ +uint8_t UartUsbIsUsbCableConnected( void ); + +/*! + * \brief Sends a buffer to the UART + * + * \param [IN] obj UART object + * \param [IN] buffer Buffer to be sent + * \param [IN] size Buffer size + * \retval status [0: OK, 1: Busy, 2: Fail] + */ +uint8_t UartUsbPutBuffer( Uart_t *obj, uint8_t *buffer, uint16_t size ); + +/*! + * \brief Sends a character to the UART + * + * \param [IN] obj UART object + * \param [IN] data Character to be sent + * \retval status [0: OK, 1: Busy, 2: Fail] + */ +uint8_t UartUsbPutChar( Uart_t *obj, uint8_t data ); + +/*! + * \brief Gets a character from the UART + * + * \param [IN] obj UART object + * \param [IN] data Received character + * \retval status [0: OK, 1: Busy, 2: Fail] + */ +uint8_t UartUsbGetChar( Uart_t *obj, uint8_t *data ); + +#endif // __UART_USB_H__ diff --git a/src/boards/RAK811BreakBoard/cmsis/arm-gcc/STM32L151XBA_FLASH.ld b/src/boards/RAK811BreakBoard/cmsis/arm-gcc/STM32L151XBA_FLASH.ld new file mode 100755 index 0000000..dd3602b --- /dev/null +++ b/src/boards/RAK811BreakBoard/cmsis/arm-gcc/STM32L151XBA_FLASH.ld @@ -0,0 +1,166 @@ +/* +***************************************************************************** +** +** File : STM32L151XBA_FLASH.ld +** +** Abstract : Linker script for STM32L151XBA Device with +** 128KByte FLASH, 32KByte RAM +** +** Set heap size, stack size and stack location according +** to application requirements. +** +** Set memory bank area and size if external memory is used. +** +** Target : STMicroelectronics STM32 +** +** Environment : Atollic TrueSTUDIO(R) +** +** Distribution: The file is distributed “as is,” without any warranty +** of any kind. +** +** (c)Copyright Atollic AB. +** You may use this file as-is or modify it according to the needs of your +** project. This file may only be built (assembled or compiled and linked) +** using the Atollic TrueSTUDIO(R) product. The use of this file together +** with other tools than Atollic TrueSTUDIO(R) is not permitted. +** +***************************************************************************** +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = 0x20007FFF; /* end of RAM */ + +/* Generate a link error if heap and stack don't fit into RAM */ +_Min_Heap_Size = 0x200; /* required amount of heap */ +_Min_Stack_Size = 0x400; /* required amount of stack */ + +/* Specify the memory areas */ +MEMORY +{ +FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 128K +RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 32K +} + +/* Define output sections */ +SECTIONS +{ + /* The startup code goes first into FLASH */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >FLASH + + /* The program code and other data goes into FLASH */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + /* Constant data goes into FLASH */ + .rodata : + { + . = ALIGN(4); + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + . = ALIGN(4); + } >FLASH + + .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH + .ARM : { + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + } >FLASH + + .preinit_array : + { + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + } >FLASH + .init_array : + { + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + } >FLASH + .fini_array : + { + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + } >FLASH + + /* used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections goes into RAM, load LMA copy after code */ + .data : + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + } >RAM AT> FLASH + + + /* Uninitialized data section */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss secion */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + /* User_heap_stack section, used to check that there is enough RAM left */ + ._user_heap_stack : + { + . = ALIGN(4); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(4); + } >RAM + + + + /* Remove information from the standard libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} diff --git a/src/boards/RAK811BreakBoard/cmsis/arm-gcc/STM32L151XB_FLASH.ld b/src/boards/RAK811BreakBoard/cmsis/arm-gcc/STM32L151XB_FLASH.ld new file mode 100755 index 0000000..dc237a3 --- /dev/null +++ b/src/boards/RAK811BreakBoard/cmsis/arm-gcc/STM32L151XB_FLASH.ld @@ -0,0 +1,166 @@ +/* +***************************************************************************** +** +** File : STM32L151XB_FLASH.ld +** +** Abstract : Linker script for STM32L151XB Device with +** 128KByte FLASH, 16KByte RAM +** +** Set heap size, stack size and stack location according +** to application requirements. +** +** Set memory bank area and size if external memory is used. +** +** Target : STMicroelectronics STM32 +** +** Environment : Atollic TrueSTUDIO(R) +** +** Distribution: The file is distributed “as is,” without any warranty +** of any kind. +** +** (c)Copyright Atollic AB. +** You may use this file as-is or modify it according to the needs of your +** project. This file may only be built (assembled or compiled and linked) +** using the Atollic TrueSTUDIO(R) product. The use of this file together +** with other tools than Atollic TrueSTUDIO(R) is not permitted. +** +***************************************************************************** +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = 0x20003FFF; /* end of RAM */ + +/* Generate a link error if heap and stack don't fit into RAM */ +_Min_Heap_Size = 0x200; /* required amount of heap */ +_Min_Stack_Size = 0x400; /* required amount of stack */ + +/* Specify the memory areas */ +MEMORY +{ +FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 128K +RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 16K +} + +/* Define output sections */ +SECTIONS +{ + /* The startup code goes first into FLASH */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >FLASH + + /* The program code and other data goes into FLASH */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + /* Constant data goes into FLASH */ + .rodata : + { + . = ALIGN(4); + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + . = ALIGN(4); + } >FLASH + + .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH + .ARM : { + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + } >FLASH + + .preinit_array : + { + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + } >FLASH + .init_array : + { + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + } >FLASH + .fini_array : + { + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + } >FLASH + + /* used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections goes into RAM, load LMA copy after code */ + .data : + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + } >RAM AT> FLASH + + + /* Uninitialized data section */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss secion */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + /* User_heap_stack section, used to check that there is enough RAM left */ + ._user_heap_stack : + { + . = ALIGN(4); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(4); + } >RAM + + + + /* Remove information from the standard libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} diff --git a/src/boards/mcu/stm32/RTE_Components.h b/src/boards/mcu/stm32/RTE_Components.h new file mode 100755 index 0000000..99d7358 --- /dev/null +++ b/src/boards/mcu/stm32/RTE_Components.h @@ -0,0 +1,14 @@ + +/* + * Auto generated Run-Time-Environment Component Configuration File + * *** Do not modify ! *** + * + * Project: 'LoRaWAN' + * Target: 'LoRaWAN Configuration' + */ + +#ifndef RTE_COMPONENTS_H +#define RTE_COMPONENTS_H + + +#endif /* RTE_COMPONENTS_H */ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h new file mode 100755 index 0000000..9261eca --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h @@ -0,0 +1,3134 @@ +/** + ****************************************************************************** + * @file stm32_hal_legacy.h + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief This file contains aliases definition for the STM32Cube HAL constants + * macros and functions maintained for legacy purpose. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32_HAL_LEGACY +#define __STM32_HAL_LEGACY + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup HAL_AES_Aliased_Defines HAL CRYP Aliased Defines maintained for legacy purpose + * @{ + */ +#define AES_FLAG_RDERR CRYP_FLAG_RDERR +#define AES_FLAG_WRERR CRYP_FLAG_WRERR +#define AES_CLEARFLAG_CCF CRYP_CLEARFLAG_CCF +#define AES_CLEARFLAG_RDERR CRYP_CLEARFLAG_RDERR +#define AES_CLEARFLAG_WRERR CRYP_CLEARFLAG_WRERR + +/** + * @} + */ + +/** @defgroup HAL_ADC_Aliased_Defines HAL ADC Aliased Defines maintained for legacy purpose + * @{ + */ +#define ADC_RESOLUTION12b ADC_RESOLUTION_12B +#define ADC_RESOLUTION10b ADC_RESOLUTION_10B +#define ADC_RESOLUTION8b ADC_RESOLUTION_8B +#define ADC_RESOLUTION6b ADC_RESOLUTION_6B +#define OVR_DATA_OVERWRITTEN ADC_OVR_DATA_OVERWRITTEN +#define OVR_DATA_PRESERVED ADC_OVR_DATA_PRESERVED +#define EOC_SINGLE_CONV ADC_EOC_SINGLE_CONV +#define EOC_SEQ_CONV ADC_EOC_SEQ_CONV +#define EOC_SINGLE_SEQ_CONV ADC_EOC_SINGLE_SEQ_CONV +#define REGULAR_GROUP ADC_REGULAR_GROUP +#define INJECTED_GROUP ADC_INJECTED_GROUP +#define REGULAR_INJECTED_GROUP ADC_REGULAR_INJECTED_GROUP +#define AWD_EVENT ADC_AWD_EVENT +#define AWD1_EVENT ADC_AWD1_EVENT +#define AWD2_EVENT ADC_AWD2_EVENT +#define AWD3_EVENT ADC_AWD3_EVENT +#define OVR_EVENT ADC_OVR_EVENT +#define JQOVF_EVENT ADC_JQOVF_EVENT +#define ALL_CHANNELS ADC_ALL_CHANNELS +#define REGULAR_CHANNELS ADC_REGULAR_CHANNELS +#define INJECTED_CHANNELS ADC_INJECTED_CHANNELS +#define SYSCFG_FLAG_SENSOR_ADC ADC_FLAG_SENSOR +#define SYSCFG_FLAG_VREF_ADC ADC_FLAG_VREFINT +#define ADC_CLOCKPRESCALER_PCLK_DIV1 ADC_CLOCK_SYNC_PCLK_DIV1 +#define ADC_CLOCKPRESCALER_PCLK_DIV2 ADC_CLOCK_SYNC_PCLK_DIV2 +#define ADC_CLOCKPRESCALER_PCLK_DIV4 ADC_CLOCK_SYNC_PCLK_DIV4 +#define ADC_CLOCKPRESCALER_PCLK_DIV6 ADC_CLOCK_SYNC_PCLK_DIV6 +#define ADC_CLOCKPRESCALER_PCLK_DIV8 ADC_CLOCK_SYNC_PCLK_DIV8 +#define ADC_EXTERNALTRIG0_T6_TRGO ADC_EXTERNALTRIGCONV_T6_TRGO +#define ADC_EXTERNALTRIG1_T21_CC2 ADC_EXTERNALTRIGCONV_T21_CC2 +#define ADC_EXTERNALTRIG2_T2_TRGO ADC_EXTERNALTRIGCONV_T2_TRGO +#define ADC_EXTERNALTRIG3_T2_CC4 ADC_EXTERNALTRIGCONV_T2_CC4 +#define ADC_EXTERNALTRIG4_T22_TRGO ADC_EXTERNALTRIGCONV_T22_TRGO +#define ADC_EXTERNALTRIG7_EXT_IT11 ADC_EXTERNALTRIGCONV_EXT_IT11 +#define ADC_CLOCK_ASYNC ADC_CLOCK_ASYNC_DIV1 +#define ADC_EXTERNALTRIG_EDGE_NONE ADC_EXTERNALTRIGCONVEDGE_NONE +#define ADC_EXTERNALTRIG_EDGE_RISING ADC_EXTERNALTRIGCONVEDGE_RISING +#define ADC_EXTERNALTRIG_EDGE_FALLING ADC_EXTERNALTRIGCONVEDGE_FALLING +#define ADC_EXTERNALTRIG_EDGE_RISINGFALLING ADC_EXTERNALTRIGCONVEDGE_RISINGFALLING +#define ADC_SAMPLETIME_2CYCLE_5 ADC_SAMPLETIME_2CYCLES_5 + +#define HAL_ADC_STATE_BUSY_REG HAL_ADC_STATE_REG_BUSY +#define HAL_ADC_STATE_BUSY_INJ HAL_ADC_STATE_INJ_BUSY +#define HAL_ADC_STATE_EOC_REG HAL_ADC_STATE_REG_EOC +#define HAL_ADC_STATE_EOC_INJ HAL_ADC_STATE_INJ_EOC +#define HAL_ADC_STATE_ERROR HAL_ADC_STATE_ERROR_INTERNAL +#define HAL_ADC_STATE_BUSY HAL_ADC_STATE_BUSY_INTERNAL +#define HAL_ADC_STATE_AWD HAL_ADC_STATE_AWD1 +/** + * @} + */ + +/** @defgroup HAL_CEC_Aliased_Defines HAL CEC Aliased Defines maintained for legacy purpose + * @{ + */ + +#define __HAL_CEC_GET_IT __HAL_CEC_GET_FLAG + +/** + * @} + */ + +/** @defgroup HAL_COMP_Aliased_Defines HAL COMP Aliased Defines maintained for legacy purpose + * @{ + */ +#define COMP_WINDOWMODE_DISABLED COMP_WINDOWMODE_DISABLE +#define COMP_WINDOWMODE_ENABLED COMP_WINDOWMODE_ENABLE +#define COMP_EXTI_LINE_COMP1_EVENT COMP_EXTI_LINE_COMP1 +#define COMP_EXTI_LINE_COMP2_EVENT COMP_EXTI_LINE_COMP2 +#define COMP_EXTI_LINE_COMP3_EVENT COMP_EXTI_LINE_COMP3 +#define COMP_EXTI_LINE_COMP4_EVENT COMP_EXTI_LINE_COMP4 +#define COMP_EXTI_LINE_COMP5_EVENT COMP_EXTI_LINE_COMP5 +#define COMP_EXTI_LINE_COMP6_EVENT COMP_EXTI_LINE_COMP6 +#define COMP_EXTI_LINE_COMP7_EVENT COMP_EXTI_LINE_COMP7 +#define COMP_OUTPUT_COMP6TIM2OCREFCLR COMP_OUTPUT_COMP6_TIM2OCREFCLR +#if defined(STM32F373xC) || defined(STM32F378xx) +#define COMP_OUTPUT_TIM3IC1 COMP_OUTPUT_COMP1_TIM3IC1 +#define COMP_OUTPUT_TIM3OCREFCLR COMP_OUTPUT_COMP1_TIM3OCREFCLR +#endif /* STM32F373xC || STM32F378xx */ + +#if defined(STM32L0) || defined(STM32L4) +#define COMP_WINDOWMODE_ENABLE COMP_WINDOWMODE_COMP1_INPUT_PLUS_COMMON + +#define COMP_NONINVERTINGINPUT_IO1 COMP_INPUT_PLUS_IO1 +#define COMP_NONINVERTINGINPUT_IO2 COMP_INPUT_PLUS_IO2 +#define COMP_NONINVERTINGINPUT_IO3 COMP_INPUT_PLUS_IO3 +#define COMP_NONINVERTINGINPUT_IO4 COMP_INPUT_PLUS_IO4 +#define COMP_NONINVERTINGINPUT_IO5 COMP_INPUT_PLUS_IO5 +#define COMP_NONINVERTINGINPUT_IO6 COMP_INPUT_PLUS_IO6 + +#define COMP_INVERTINGINPUT_1_4VREFINT COMP_INPUT_MINUS_1_4VREFINT +#define COMP_INVERTINGINPUT_1_2VREFINT COMP_INPUT_MINUS_1_2VREFINT +#define COMP_INVERTINGINPUT_3_4VREFINT COMP_INPUT_MINUS_3_4VREFINT +#define COMP_INVERTINGINPUT_VREFINT COMP_INPUT_MINUS_VREFINT +#define COMP_INVERTINGINPUT_DAC1_CH1 COMP_INPUT_MINUS_DAC1_CH1 +#define COMP_INVERTINGINPUT_DAC1_CH2 COMP_INPUT_MINUS_DAC1_CH2 +#define COMP_INVERTINGINPUT_DAC1 COMP_INPUT_MINUS_DAC1_CH1 +#define COMP_INVERTINGINPUT_DAC2 COMP_INPUT_MINUS_DAC1_CH2 +#define COMP_INVERTINGINPUT_IO1 COMP_INPUT_MINUS_IO1 +#if defined(STM32L0) +/* Issue fixed on STM32L0 COMP driver: only 2 dedicated IO (IO1 and IO2), */ +/* IO2 was wrongly assigned to IO shared with DAC and IO3 was corresponding */ +/* to the second dedicated IO (only for COMP2). */ +#define COMP_INVERTINGINPUT_IO2 COMP_INPUT_MINUS_DAC1_CH2 +#define COMP_INVERTINGINPUT_IO3 COMP_INPUT_MINUS_IO2 +#else +#define COMP_INVERTINGINPUT_IO2 COMP_INPUT_MINUS_IO2 +#define COMP_INVERTINGINPUT_IO3 COMP_INPUT_MINUS_IO3 +#endif +#define COMP_INVERTINGINPUT_IO4 COMP_INPUT_MINUS_IO4 +#define COMP_INVERTINGINPUT_IO5 COMP_INPUT_MINUS_IO5 + +#define COMP_OUTPUTLEVEL_LOW COMP_OUTPUT_LEVEL_LOW +#define COMP_OUTPUTLEVEL_HIGH COMP_OUTPUT_LEVEL_HIGH + +/* Note: Literal "COMP_FLAG_LOCK" kept for legacy purpose. */ +/* To check COMP lock state, use macro "__HAL_COMP_IS_LOCKED()". */ +#if defined(COMP_CSR_LOCK) +#define COMP_FLAG_LOCK COMP_CSR_LOCK +#elif defined(COMP_CSR_COMP1LOCK) +#define COMP_FLAG_LOCK COMP_CSR_COMP1LOCK +#elif defined(COMP_CSR_COMPxLOCK) +#define COMP_FLAG_LOCK COMP_CSR_COMPxLOCK +#endif + +#if defined(STM32L4) +#define COMP_BLANKINGSRCE_TIM1OC5 COMP_BLANKINGSRC_TIM1_OC5_COMP1 +#define COMP_BLANKINGSRCE_TIM2OC3 COMP_BLANKINGSRC_TIM2_OC3_COMP1 +#define COMP_BLANKINGSRCE_TIM3OC3 COMP_BLANKINGSRC_TIM3_OC3_COMP1 +#define COMP_BLANKINGSRCE_TIM3OC4 COMP_BLANKINGSRC_TIM3_OC4_COMP2 +#define COMP_BLANKINGSRCE_TIM8OC5 COMP_BLANKINGSRC_TIM8_OC5_COMP2 +#define COMP_BLANKINGSRCE_TIM15OC1 COMP_BLANKINGSRC_TIM15_OC1_COMP2 +#define COMP_BLANKINGSRCE_NONE COMP_BLANKINGSRC_NONE +#endif + +#if defined(STM32L0) +#define COMP_MODE_HIGHSPEED COMP_POWERMODE_MEDIUMSPEED +#define COMP_MODE_LOWSPEED COMP_POWERMODE_ULTRALOWPOWER +#else +#define COMP_MODE_HIGHSPEED COMP_POWERMODE_HIGHSPEED +#define COMP_MODE_MEDIUMSPEED COMP_POWERMODE_MEDIUMSPEED +#define COMP_MODE_LOWPOWER COMP_POWERMODE_LOWPOWER +#define COMP_MODE_ULTRALOWPOWER COMP_POWERMODE_ULTRALOWPOWER +#endif + +#endif +/** + * @} + */ + +/** @defgroup HAL_CORTEX_Aliased_Defines HAL CORTEX Aliased Defines maintained for legacy purpose + * @{ + */ +#define __HAL_CORTEX_SYSTICKCLK_CONFIG HAL_SYSTICK_CLKSourceConfig +/** + * @} + */ + +/** @defgroup HAL_CRC_Aliased_Defines HAL CRC Aliased Defines maintained for legacy purpose + * @{ + */ + +#define CRC_OUTPUTDATA_INVERSION_DISABLED CRC_OUTPUTDATA_INVERSION_DISABLE +#define CRC_OUTPUTDATA_INVERSION_ENABLED CRC_OUTPUTDATA_INVERSION_ENABLE + +/** + * @} + */ + +/** @defgroup HAL_DAC_Aliased_Defines HAL DAC Aliased Defines maintained for legacy purpose + * @{ + */ + +#define DAC1_CHANNEL_1 DAC_CHANNEL_1 +#define DAC1_CHANNEL_2 DAC_CHANNEL_2 +#define DAC2_CHANNEL_1 DAC_CHANNEL_1 +#define DAC_WAVE_NONE ((uint32_t)0x00000000U) +#define DAC_WAVE_NOISE ((uint32_t)DAC_CR_WAVE1_0) +#define DAC_WAVE_TRIANGLE ((uint32_t)DAC_CR_WAVE1_1) +#define DAC_WAVEGENERATION_NONE DAC_WAVE_NONE +#define DAC_WAVEGENERATION_NOISE DAC_WAVE_NOISE +#define DAC_WAVEGENERATION_TRIANGLE DAC_WAVE_TRIANGLE + +/** + * @} + */ + +/** @defgroup HAL_DMA_Aliased_Defines HAL DMA Aliased Defines maintained for legacy purpose + * @{ + */ +#define HAL_REMAPDMA_ADC_DMA_CH2 DMA_REMAP_ADC_DMA_CH2 +#define HAL_REMAPDMA_USART1_TX_DMA_CH4 DMA_REMAP_USART1_TX_DMA_CH4 +#define HAL_REMAPDMA_USART1_RX_DMA_CH5 DMA_REMAP_USART1_RX_DMA_CH5 +#define HAL_REMAPDMA_TIM16_DMA_CH4 DMA_REMAP_TIM16_DMA_CH4 +#define HAL_REMAPDMA_TIM17_DMA_CH2 DMA_REMAP_TIM17_DMA_CH2 +#define HAL_REMAPDMA_USART3_DMA_CH32 DMA_REMAP_USART3_DMA_CH32 +#define HAL_REMAPDMA_TIM16_DMA_CH6 DMA_REMAP_TIM16_DMA_CH6 +#define HAL_REMAPDMA_TIM17_DMA_CH7 DMA_REMAP_TIM17_DMA_CH7 +#define HAL_REMAPDMA_SPI2_DMA_CH67 DMA_REMAP_SPI2_DMA_CH67 +#define HAL_REMAPDMA_USART2_DMA_CH67 DMA_REMAP_USART2_DMA_CH67 +#define HAL_REMAPDMA_USART3_DMA_CH32 DMA_REMAP_USART3_DMA_CH32 +#define HAL_REMAPDMA_I2C1_DMA_CH76 DMA_REMAP_I2C1_DMA_CH76 +#define HAL_REMAPDMA_TIM1_DMA_CH6 DMA_REMAP_TIM1_DMA_CH6 +#define HAL_REMAPDMA_TIM2_DMA_CH7 DMA_REMAP_TIM2_DMA_CH7 +#define HAL_REMAPDMA_TIM3_DMA_CH6 DMA_REMAP_TIM3_DMA_CH6 + +#define IS_HAL_REMAPDMA IS_DMA_REMAP +#define __HAL_REMAPDMA_CHANNEL_ENABLE __HAL_DMA_REMAP_CHANNEL_ENABLE +#define __HAL_REMAPDMA_CHANNEL_DISABLE __HAL_DMA_REMAP_CHANNEL_DISABLE + + + +/** + * @} + */ + +/** @defgroup HAL_FLASH_Aliased_Defines HAL FLASH Aliased Defines maintained for legacy purpose + * @{ + */ + +#define TYPEPROGRAM_BYTE FLASH_TYPEPROGRAM_BYTE +#define TYPEPROGRAM_HALFWORD FLASH_TYPEPROGRAM_HALFWORD +#define TYPEPROGRAM_WORD FLASH_TYPEPROGRAM_WORD +#define TYPEPROGRAM_DOUBLEWORD FLASH_TYPEPROGRAM_DOUBLEWORD +#define TYPEERASE_SECTORS FLASH_TYPEERASE_SECTORS +#define TYPEERASE_PAGES FLASH_TYPEERASE_PAGES +#define TYPEERASE_PAGEERASE FLASH_TYPEERASE_PAGES +#define TYPEERASE_MASSERASE FLASH_TYPEERASE_MASSERASE +#define WRPSTATE_DISABLE OB_WRPSTATE_DISABLE +#define WRPSTATE_ENABLE OB_WRPSTATE_ENABLE +#define HAL_FLASH_TIMEOUT_VALUE FLASH_TIMEOUT_VALUE +#define OBEX_PCROP OPTIONBYTE_PCROP +#define OBEX_BOOTCONFIG OPTIONBYTE_BOOTCONFIG +#define PCROPSTATE_DISABLE OB_PCROP_STATE_DISABLE +#define PCROPSTATE_ENABLE OB_PCROP_STATE_ENABLE +#define TYPEERASEDATA_BYTE FLASH_TYPEERASEDATA_BYTE +#define TYPEERASEDATA_HALFWORD FLASH_TYPEERASEDATA_HALFWORD +#define TYPEERASEDATA_WORD FLASH_TYPEERASEDATA_WORD +#define TYPEPROGRAMDATA_BYTE FLASH_TYPEPROGRAMDATA_BYTE +#define TYPEPROGRAMDATA_HALFWORD FLASH_TYPEPROGRAMDATA_HALFWORD +#define TYPEPROGRAMDATA_WORD FLASH_TYPEPROGRAMDATA_WORD +#define TYPEPROGRAMDATA_FASTBYTE FLASH_TYPEPROGRAMDATA_FASTBYTE +#define TYPEPROGRAMDATA_FASTHALFWORD FLASH_TYPEPROGRAMDATA_FASTHALFWORD +#define TYPEPROGRAMDATA_FASTWORD FLASH_TYPEPROGRAMDATA_FASTWORD +#define PAGESIZE FLASH_PAGE_SIZE +#define TYPEPROGRAM_FASTBYTE FLASH_TYPEPROGRAM_BYTE +#define TYPEPROGRAM_FASTHALFWORD FLASH_TYPEPROGRAM_HALFWORD +#define TYPEPROGRAM_FASTWORD FLASH_TYPEPROGRAM_WORD +#define VOLTAGE_RANGE_1 FLASH_VOLTAGE_RANGE_1 +#define VOLTAGE_RANGE_2 FLASH_VOLTAGE_RANGE_2 +#define VOLTAGE_RANGE_3 FLASH_VOLTAGE_RANGE_3 +#define VOLTAGE_RANGE_4 FLASH_VOLTAGE_RANGE_4 +#define TYPEPROGRAM_FAST FLASH_TYPEPROGRAM_FAST +#define TYPEPROGRAM_FAST_AND_LAST FLASH_TYPEPROGRAM_FAST_AND_LAST +#define WRPAREA_BANK1_AREAA OB_WRPAREA_BANK1_AREAA +#define WRPAREA_BANK1_AREAB OB_WRPAREA_BANK1_AREAB +#define WRPAREA_BANK2_AREAA OB_WRPAREA_BANK2_AREAA +#define WRPAREA_BANK2_AREAB OB_WRPAREA_BANK2_AREAB +#define IWDG_STDBY_FREEZE OB_IWDG_STDBY_FREEZE +#define IWDG_STDBY_ACTIVE OB_IWDG_STDBY_RUN +#define IWDG_STOP_FREEZE OB_IWDG_STOP_FREEZE +#define IWDG_STOP_ACTIVE OB_IWDG_STOP_RUN +#define FLASH_ERROR_NONE HAL_FLASH_ERROR_NONE +#define FLASH_ERROR_RD HAL_FLASH_ERROR_RD +#define FLASH_ERROR_PG HAL_FLASH_ERROR_PROG +#define FLASH_ERROR_PGP HAL_FLASH_ERROR_PGS +#define FLASH_ERROR_WRP HAL_FLASH_ERROR_WRP +#define FLASH_ERROR_OPTV HAL_FLASH_ERROR_OPTV +#define FLASH_ERROR_OPTVUSR HAL_FLASH_ERROR_OPTVUSR +#define FLASH_ERROR_PROG HAL_FLASH_ERROR_PROG +#define FLASH_ERROR_OP HAL_FLASH_ERROR_OPERATION +#define FLASH_ERROR_PGA HAL_FLASH_ERROR_PGA +#define FLASH_ERROR_SIZE HAL_FLASH_ERROR_SIZE +#define FLASH_ERROR_SIZ HAL_FLASH_ERROR_SIZE +#define FLASH_ERROR_PGS HAL_FLASH_ERROR_PGS +#define FLASH_ERROR_MIS HAL_FLASH_ERROR_MIS +#define FLASH_ERROR_FAST HAL_FLASH_ERROR_FAST +#define FLASH_ERROR_FWWERR HAL_FLASH_ERROR_FWWERR +#define FLASH_ERROR_NOTZERO HAL_FLASH_ERROR_NOTZERO +#define FLASH_ERROR_OPERATION HAL_FLASH_ERROR_OPERATION +#define FLASH_ERROR_ERS HAL_FLASH_ERROR_ERS +#define OB_WDG_SW OB_IWDG_SW +#define OB_WDG_HW OB_IWDG_HW +#define OB_SDADC12_VDD_MONITOR_SET OB_SDACD_VDD_MONITOR_SET +#define OB_SDADC12_VDD_MONITOR_RESET OB_SDACD_VDD_MONITOR_RESET +#define OB_RAM_PARITY_CHECK_SET OB_SRAM_PARITY_SET +#define OB_RAM_PARITY_CHECK_RESET OB_SRAM_PARITY_RESET +#define IS_OB_SDADC12_VDD_MONITOR IS_OB_SDACD_VDD_MONITOR +#define OB_RDP_LEVEL0 OB_RDP_LEVEL_0 +#define OB_RDP_LEVEL1 OB_RDP_LEVEL_1 +#define OB_RDP_LEVEL2 OB_RDP_LEVEL_2 +/** + * @} + */ + +/** @defgroup HAL_SYSCFG_Aliased_Defines HAL SYSCFG Aliased Defines maintained for legacy purpose + * @{ + */ + +#define HAL_SYSCFG_FASTMODEPLUS_I2C_PA9 I2C_FASTMODEPLUS_PA9 +#define HAL_SYSCFG_FASTMODEPLUS_I2C_PA10 I2C_FASTMODEPLUS_PA10 +#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB6 I2C_FASTMODEPLUS_PB6 +#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB7 I2C_FASTMODEPLUS_PB7 +#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB8 I2C_FASTMODEPLUS_PB8 +#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB9 I2C_FASTMODEPLUS_PB9 +#define HAL_SYSCFG_FASTMODEPLUS_I2C1 I2C_FASTMODEPLUS_I2C1 +#define HAL_SYSCFG_FASTMODEPLUS_I2C2 I2C_FASTMODEPLUS_I2C2 +#define HAL_SYSCFG_FASTMODEPLUS_I2C3 I2C_FASTMODEPLUS_I2C3 +/** + * @} + */ + + +/** @defgroup LL_FMC_Aliased_Defines LL FMC Aliased Defines maintained for compatibility purpose + * @{ + */ +#if defined(STM32L4) || defined(STM32F7) +#define FMC_NAND_PCC_WAIT_FEATURE_DISABLE FMC_NAND_WAIT_FEATURE_DISABLE +#define FMC_NAND_PCC_WAIT_FEATURE_ENABLE FMC_NAND_WAIT_FEATURE_ENABLE +#define FMC_NAND_PCC_MEM_BUS_WIDTH_8 FMC_NAND_MEM_BUS_WIDTH_8 +#define FMC_NAND_PCC_MEM_BUS_WIDTH_16 FMC_NAND_MEM_BUS_WIDTH_16 +#else +#define FMC_NAND_WAIT_FEATURE_DISABLE FMC_NAND_PCC_WAIT_FEATURE_DISABLE +#define FMC_NAND_WAIT_FEATURE_ENABLE FMC_NAND_PCC_WAIT_FEATURE_ENABLE +#define FMC_NAND_MEM_BUS_WIDTH_8 FMC_NAND_PCC_MEM_BUS_WIDTH_8 +#define FMC_NAND_MEM_BUS_WIDTH_16 FMC_NAND_PCC_MEM_BUS_WIDTH_16 +#endif +/** + * @} + */ + +/** @defgroup LL_FSMC_Aliased_Defines LL FSMC Aliased Defines maintained for legacy purpose + * @{ + */ + +#define FSMC_NORSRAM_TYPEDEF FSMC_NORSRAM_TypeDef +#define FSMC_NORSRAM_EXTENDED_TYPEDEF FSMC_NORSRAM_EXTENDED_TypeDef +/** + * @} + */ + +/** @defgroup HAL_GPIO_Aliased_Macros HAL GPIO Aliased Macros maintained for legacy purpose + * @{ + */ +#define GET_GPIO_SOURCE GPIO_GET_INDEX +#define GET_GPIO_INDEX GPIO_GET_INDEX + +#if defined(STM32F4) +#define GPIO_AF12_SDMMC GPIO_AF12_SDIO +#define GPIO_AF12_SDMMC1 GPIO_AF12_SDIO +#endif + +#if defined(STM32F7) +#define GPIO_AF12_SDIO GPIO_AF12_SDMMC1 +#define GPIO_AF12_SDMMC GPIO_AF12_SDMMC1 +#endif + +#if defined(STM32L4) +#define GPIO_AF12_SDIO GPIO_AF12_SDMMC1 +#define GPIO_AF12_SDMMC GPIO_AF12_SDMMC1 +#endif + +#define GPIO_AF0_LPTIM GPIO_AF0_LPTIM1 +#define GPIO_AF1_LPTIM GPIO_AF1_LPTIM1 +#define GPIO_AF2_LPTIM GPIO_AF2_LPTIM1 + +#if defined(STM32L0) || defined(STM32L4) || defined(STM32F4) || defined(STM32F2) || defined(STM32F7) +#define GPIO_SPEED_LOW GPIO_SPEED_FREQ_LOW +#define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_MEDIUM +#define GPIO_SPEED_FAST GPIO_SPEED_FREQ_HIGH +#define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_VERY_HIGH +#endif /* STM32L0 || STM32L4 || STM32F4 || STM32F2 || STM32F7 */ + +#if defined(STM32L1) + #define GPIO_SPEED_VERY_LOW GPIO_SPEED_FREQ_LOW + #define GPIO_SPEED_LOW GPIO_SPEED_FREQ_MEDIUM + #define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_HIGH + #define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_VERY_HIGH +#endif /* STM32L1 */ + +#if defined(STM32F0) || defined(STM32F3) || defined(STM32F1) + #define GPIO_SPEED_LOW GPIO_SPEED_FREQ_LOW + #define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_MEDIUM + #define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_HIGH +#endif /* STM32F0 || STM32F3 || STM32F1 */ + +#define GPIO_AF6_DFSDM GPIO_AF6_DFSDM1 +/** + * @} + */ + +/** @defgroup HAL_HRTIM_Aliased_Macros HAL HRTIM Aliased Macros maintained for legacy purpose + * @{ + */ +#define HRTIM_TIMDELAYEDPROTECTION_DISABLED HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DISABLED +#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT1_EEV68 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT1_EEV6 +#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT2_EEV68 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT2_EEV6 +#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDBOTH_EEV68 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDBOTH_EEV6 +#define HRTIM_TIMDELAYEDPROTECTION_BALANCED_EEV68 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_BALANCED_EEV6 +#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT1_DEEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT1_DEEV7 +#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT2_DEEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT2_DEEV7 +#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDBOTH_EEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDBOTH_EEV7 +#define HRTIM_TIMDELAYEDPROTECTION_BALANCED_EEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_BALANCED_EEV7 + +#define __HAL_HRTIM_SetCounter __HAL_HRTIM_SETCOUNTER +#define __HAL_HRTIM_GetCounter __HAL_HRTIM_GETCOUNTER +#define __HAL_HRTIM_SetPeriod __HAL_HRTIM_SETPERIOD +#define __HAL_HRTIM_GetPeriod __HAL_HRTIM_GETPERIOD +#define __HAL_HRTIM_SetClockPrescaler __HAL_HRTIM_SETCLOCKPRESCALER +#define __HAL_HRTIM_GetClockPrescaler __HAL_HRTIM_GETCLOCKPRESCALER +#define __HAL_HRTIM_SetCompare __HAL_HRTIM_SETCOMPARE +#define __HAL_HRTIM_GetCompare __HAL_HRTIM_GETCOMPARE +/** + * @} + */ + +/** @defgroup HAL_I2C_Aliased_Defines HAL I2C Aliased Defines maintained for legacy purpose + * @{ + */ +#define I2C_DUALADDRESS_DISABLED I2C_DUALADDRESS_DISABLE +#define I2C_DUALADDRESS_ENABLED I2C_DUALADDRESS_ENABLE +#define I2C_GENERALCALL_DISABLED I2C_GENERALCALL_DISABLE +#define I2C_GENERALCALL_ENABLED I2C_GENERALCALL_ENABLE +#define I2C_NOSTRETCH_DISABLED I2C_NOSTRETCH_DISABLE +#define I2C_NOSTRETCH_ENABLED I2C_NOSTRETCH_ENABLE +#define I2C_ANALOGFILTER_ENABLED I2C_ANALOGFILTER_ENABLE +#define I2C_ANALOGFILTER_DISABLED I2C_ANALOGFILTER_DISABLE +#if defined(STM32F0) || defined(STM32F1) || defined(STM32F3) || defined(STM32G0) || defined(STM32L4) || defined(STM32L1) || defined(STM32F7) +#define HAL_I2C_STATE_MEM_BUSY_TX HAL_I2C_STATE_BUSY_TX +#define HAL_I2C_STATE_MEM_BUSY_RX HAL_I2C_STATE_BUSY_RX +#define HAL_I2C_STATE_MASTER_BUSY_TX HAL_I2C_STATE_BUSY_TX +#define HAL_I2C_STATE_MASTER_BUSY_RX HAL_I2C_STATE_BUSY_RX +#define HAL_I2C_STATE_SLAVE_BUSY_TX HAL_I2C_STATE_BUSY_TX +#define HAL_I2C_STATE_SLAVE_BUSY_RX HAL_I2C_STATE_BUSY_RX +#endif +/** + * @} + */ + +/** @defgroup HAL_IRDA_Aliased_Defines HAL IRDA Aliased Defines maintained for legacy purpose + * @{ + */ +#define IRDA_ONE_BIT_SAMPLE_DISABLED IRDA_ONE_BIT_SAMPLE_DISABLE +#define IRDA_ONE_BIT_SAMPLE_ENABLED IRDA_ONE_BIT_SAMPLE_ENABLE + +/** + * @} + */ + +/** @defgroup HAL_IWDG_Aliased_Defines HAL IWDG Aliased Defines maintained for legacy purpose + * @{ + */ +#define KR_KEY_RELOAD IWDG_KEY_RELOAD +#define KR_KEY_ENABLE IWDG_KEY_ENABLE +#define KR_KEY_EWA IWDG_KEY_WRITE_ACCESS_ENABLE +#define KR_KEY_DWA IWDG_KEY_WRITE_ACCESS_DISABLE +/** + * @} + */ + +/** @defgroup HAL_LPTIM_Aliased_Defines HAL LPTIM Aliased Defines maintained for legacy purpose + * @{ + */ + +#define LPTIM_CLOCKSAMPLETIME_DIRECTTRANSISTION LPTIM_CLOCKSAMPLETIME_DIRECTTRANSITION +#define LPTIM_CLOCKSAMPLETIME_2TRANSISTIONS LPTIM_CLOCKSAMPLETIME_2TRANSITIONS +#define LPTIM_CLOCKSAMPLETIME_4TRANSISTIONS LPTIM_CLOCKSAMPLETIME_4TRANSITIONS +#define LPTIM_CLOCKSAMPLETIME_8TRANSISTIONS LPTIM_CLOCKSAMPLETIME_8TRANSITIONS + +#define LPTIM_CLOCKPOLARITY_RISINGEDGE LPTIM_CLOCKPOLARITY_RISING +#define LPTIM_CLOCKPOLARITY_FALLINGEDGE LPTIM_CLOCKPOLARITY_FALLING +#define LPTIM_CLOCKPOLARITY_BOTHEDGES LPTIM_CLOCKPOLARITY_RISING_FALLING + +#define LPTIM_TRIGSAMPLETIME_DIRECTTRANSISTION LPTIM_TRIGSAMPLETIME_DIRECTTRANSITION +#define LPTIM_TRIGSAMPLETIME_2TRANSISTIONS LPTIM_TRIGSAMPLETIME_2TRANSITIONS +#define LPTIM_TRIGSAMPLETIME_4TRANSISTIONS LPTIM_TRIGSAMPLETIME_4TRANSITIONS +#define LPTIM_TRIGSAMPLETIME_8TRANSISTIONS LPTIM_TRIGSAMPLETIME_8TRANSITIONS + +/* The following 3 definition have also been present in a temporary version of lptim.h */ +/* They need to be renamed also to the right name, just in case */ +#define LPTIM_TRIGSAMPLETIME_2TRANSITION LPTIM_TRIGSAMPLETIME_2TRANSITIONS +#define LPTIM_TRIGSAMPLETIME_4TRANSITION LPTIM_TRIGSAMPLETIME_4TRANSITIONS +#define LPTIM_TRIGSAMPLETIME_8TRANSITION LPTIM_TRIGSAMPLETIME_8TRANSITIONS + +/** + * @} + */ + +/** @defgroup HAL_NAND_Aliased_Defines HAL NAND Aliased Defines maintained for legacy purpose + * @{ + */ +#define HAL_NAND_Read_Page HAL_NAND_Read_Page_8b +#define HAL_NAND_Write_Page HAL_NAND_Write_Page_8b +#define HAL_NAND_Read_SpareArea HAL_NAND_Read_SpareArea_8b +#define HAL_NAND_Write_SpareArea HAL_NAND_Write_SpareArea_8b + +#define NAND_AddressTypedef NAND_AddressTypeDef + +#define __ARRAY_ADDRESS ARRAY_ADDRESS +#define __ADDR_1st_CYCLE ADDR_1ST_CYCLE +#define __ADDR_2nd_CYCLE ADDR_2ND_CYCLE +#define __ADDR_3rd_CYCLE ADDR_3RD_CYCLE +#define __ADDR_4th_CYCLE ADDR_4TH_CYCLE +/** + * @} + */ + +/** @defgroup HAL_NOR_Aliased_Defines HAL NOR Aliased Defines maintained for legacy purpose + * @{ + */ +#define NOR_StatusTypedef HAL_NOR_StatusTypeDef +#define NOR_SUCCESS HAL_NOR_STATUS_SUCCESS +#define NOR_ONGOING HAL_NOR_STATUS_ONGOING +#define NOR_ERROR HAL_NOR_STATUS_ERROR +#define NOR_TIMEOUT HAL_NOR_STATUS_TIMEOUT + +#define __NOR_WRITE NOR_WRITE +#define __NOR_ADDR_SHIFT NOR_ADDR_SHIFT +/** + * @} + */ + +/** @defgroup HAL_OPAMP_Aliased_Defines HAL OPAMP Aliased Defines maintained for legacy purpose + * @{ + */ + +#define OPAMP_NONINVERTINGINPUT_VP0 OPAMP_NONINVERTINGINPUT_IO0 +#define OPAMP_NONINVERTINGINPUT_VP1 OPAMP_NONINVERTINGINPUT_IO1 +#define OPAMP_NONINVERTINGINPUT_VP2 OPAMP_NONINVERTINGINPUT_IO2 +#define OPAMP_NONINVERTINGINPUT_VP3 OPAMP_NONINVERTINGINPUT_IO3 + +#define OPAMP_SEC_NONINVERTINGINPUT_VP0 OPAMP_SEC_NONINVERTINGINPUT_IO0 +#define OPAMP_SEC_NONINVERTINGINPUT_VP1 OPAMP_SEC_NONINVERTINGINPUT_IO1 +#define OPAMP_SEC_NONINVERTINGINPUT_VP2 OPAMP_SEC_NONINVERTINGINPUT_IO2 +#define OPAMP_SEC_NONINVERTINGINPUT_VP3 OPAMP_SEC_NONINVERTINGINPUT_IO3 + +#define OPAMP_INVERTINGINPUT_VM0 OPAMP_INVERTINGINPUT_IO0 +#define OPAMP_INVERTINGINPUT_VM1 OPAMP_INVERTINGINPUT_IO1 + +#define IOPAMP_INVERTINGINPUT_VM0 OPAMP_INVERTINGINPUT_IO0 +#define IOPAMP_INVERTINGINPUT_VM1 OPAMP_INVERTINGINPUT_IO1 + +#define OPAMP_SEC_INVERTINGINPUT_VM0 OPAMP_SEC_INVERTINGINPUT_IO0 +#define OPAMP_SEC_INVERTINGINPUT_VM1 OPAMP_SEC_INVERTINGINPUT_IO1 + +#define OPAMP_INVERTINGINPUT_VINM OPAMP_SEC_INVERTINGINPUT_IO1 + +#define OPAMP_PGACONNECT_NO OPAMP_PGA_CONNECT_INVERTINGINPUT_NO +#define OPAMP_PGACONNECT_VM0 OPAMP_PGA_CONNECT_INVERTINGINPUT_IO0 +#define OPAMP_PGACONNECT_VM1 OPAMP_PGA_CONNECT_INVERTINGINPUT_IO1 + +/** + * @} + */ + +/** @defgroup HAL_I2S_Aliased_Defines HAL I2S Aliased Defines maintained for legacy purpose + * @{ + */ +#define I2S_STANDARD_PHILLIPS I2S_STANDARD_PHILIPS +#if defined(STM32F7) + #define I2S_CLOCK_SYSCLK I2S_CLOCK_PLL +#endif +/** + * @} + */ + +/** @defgroup HAL_PCCARD_Aliased_Defines HAL PCCARD Aliased Defines maintained for legacy purpose + * @{ + */ + +/* Compact Flash-ATA registers description */ +#define CF_DATA ATA_DATA +#define CF_SECTOR_COUNT ATA_SECTOR_COUNT +#define CF_SECTOR_NUMBER ATA_SECTOR_NUMBER +#define CF_CYLINDER_LOW ATA_CYLINDER_LOW +#define CF_CYLINDER_HIGH ATA_CYLINDER_HIGH +#define CF_CARD_HEAD ATA_CARD_HEAD +#define CF_STATUS_CMD ATA_STATUS_CMD +#define CF_STATUS_CMD_ALTERNATE ATA_STATUS_CMD_ALTERNATE +#define CF_COMMON_DATA_AREA ATA_COMMON_DATA_AREA + +/* Compact Flash-ATA commands */ +#define CF_READ_SECTOR_CMD ATA_READ_SECTOR_CMD +#define CF_WRITE_SECTOR_CMD ATA_WRITE_SECTOR_CMD +#define CF_ERASE_SECTOR_CMD ATA_ERASE_SECTOR_CMD +#define CF_IDENTIFY_CMD ATA_IDENTIFY_CMD + +#define PCCARD_StatusTypedef HAL_PCCARD_StatusTypeDef +#define PCCARD_SUCCESS HAL_PCCARD_STATUS_SUCCESS +#define PCCARD_ONGOING HAL_PCCARD_STATUS_ONGOING +#define PCCARD_ERROR HAL_PCCARD_STATUS_ERROR +#define PCCARD_TIMEOUT HAL_PCCARD_STATUS_TIMEOUT +/** + * @} + */ + +/** @defgroup HAL_RTC_Aliased_Defines HAL RTC Aliased Defines maintained for legacy purpose + * @{ + */ + +#define FORMAT_BIN RTC_FORMAT_BIN +#define FORMAT_BCD RTC_FORMAT_BCD + +#define RTC_ALARMSUBSECONDMASK_None RTC_ALARMSUBSECONDMASK_NONE +#define RTC_TAMPERERASEBACKUP_ENABLED RTC_TAMPER_ERASE_BACKUP_ENABLE +#define RTC_TAMPERERASEBACKUP_DISABLED RTC_TAMPER_ERASE_BACKUP_DISABLE +#define RTC_TAMPERMASK_FLAG_DISABLED RTC_TAMPERMASK_FLAG_DISABLE +#define RTC_TAMPERMASK_FLAG_ENABLED RTC_TAMPERMASK_FLAG_ENABLE + +#define RTC_MASKTAMPERFLAG_DISABLED RTC_TAMPERMASK_FLAG_DISABLE +#define RTC_MASKTAMPERFLAG_ENABLED RTC_TAMPERMASK_FLAG_ENABLE +#define RTC_TAMPERERASEBACKUP_ENABLED RTC_TAMPER_ERASE_BACKUP_ENABLE +#define RTC_TAMPERERASEBACKUP_DISABLED RTC_TAMPER_ERASE_BACKUP_DISABLE +#define RTC_MASKTAMPERFLAG_DISABLED RTC_TAMPERMASK_FLAG_DISABLE +#define RTC_MASKTAMPERFLAG_ENABLED RTC_TAMPERMASK_FLAG_ENABLE +#define RTC_TAMPER1_2_INTERRUPT RTC_ALL_TAMPER_INTERRUPT +#define RTC_TAMPER1_2_3_INTERRUPT RTC_ALL_TAMPER_INTERRUPT + +#define RTC_TIMESTAMPPIN_PC13 RTC_TIMESTAMPPIN_DEFAULT +#define RTC_TIMESTAMPPIN_PA0 RTC_TIMESTAMPPIN_POS1 +#define RTC_TIMESTAMPPIN_PI8 RTC_TIMESTAMPPIN_POS1 +#define RTC_TIMESTAMPPIN_PC1 RTC_TIMESTAMPPIN_POS2 + +#define RTC_OUTPUT_REMAP_PC13 RTC_OUTPUT_REMAP_NONE +#define RTC_OUTPUT_REMAP_PB14 RTC_OUTPUT_REMAP_POS1 +#define RTC_OUTPUT_REMAP_PB2 RTC_OUTPUT_REMAP_POS1 + +#define RTC_TAMPERPIN_PC13 RTC_TAMPERPIN_DEFAULT +#define RTC_TAMPERPIN_PA0 RTC_TAMPERPIN_POS1 +#define RTC_TAMPERPIN_PI8 RTC_TAMPERPIN_POS1 + +/** + * @} + */ + + +/** @defgroup HAL_SMARTCARD_Aliased_Defines HAL SMARTCARD Aliased Defines maintained for legacy purpose + * @{ + */ +#define SMARTCARD_NACK_ENABLED SMARTCARD_NACK_ENABLE +#define SMARTCARD_NACK_DISABLED SMARTCARD_NACK_DISABLE + +#define SMARTCARD_ONEBIT_SAMPLING_DISABLED SMARTCARD_ONE_BIT_SAMPLE_DISABLE +#define SMARTCARD_ONEBIT_SAMPLING_ENABLED SMARTCARD_ONE_BIT_SAMPLE_ENABLE +#define SMARTCARD_ONEBIT_SAMPLING_DISABLE SMARTCARD_ONE_BIT_SAMPLE_DISABLE +#define SMARTCARD_ONEBIT_SAMPLING_ENABLE SMARTCARD_ONE_BIT_SAMPLE_ENABLE + +#define SMARTCARD_TIMEOUT_DISABLED SMARTCARD_TIMEOUT_DISABLE +#define SMARTCARD_TIMEOUT_ENABLED SMARTCARD_TIMEOUT_ENABLE + +#define SMARTCARD_LASTBIT_DISABLED SMARTCARD_LASTBIT_DISABLE +#define SMARTCARD_LASTBIT_ENABLED SMARTCARD_LASTBIT_ENABLE +/** + * @} + */ + + +/** @defgroup HAL_SMBUS_Aliased_Defines HAL SMBUS Aliased Defines maintained for legacy purpose + * @{ + */ +#define SMBUS_DUALADDRESS_DISABLED SMBUS_DUALADDRESS_DISABLE +#define SMBUS_DUALADDRESS_ENABLED SMBUS_DUALADDRESS_ENABLE +#define SMBUS_GENERALCALL_DISABLED SMBUS_GENERALCALL_DISABLE +#define SMBUS_GENERALCALL_ENABLED SMBUS_GENERALCALL_ENABLE +#define SMBUS_NOSTRETCH_DISABLED SMBUS_NOSTRETCH_DISABLE +#define SMBUS_NOSTRETCH_ENABLED SMBUS_NOSTRETCH_ENABLE +#define SMBUS_ANALOGFILTER_ENABLED SMBUS_ANALOGFILTER_ENABLE +#define SMBUS_ANALOGFILTER_DISABLED SMBUS_ANALOGFILTER_DISABLE +#define SMBUS_PEC_DISABLED SMBUS_PEC_DISABLE +#define SMBUS_PEC_ENABLED SMBUS_PEC_ENABLE +#define HAL_SMBUS_STATE_SLAVE_LISTEN HAL_SMBUS_STATE_LISTEN +/** + * @} + */ + +/** @defgroup HAL_SPI_Aliased_Defines HAL SPI Aliased Defines maintained for legacy purpose + * @{ + */ +#define SPI_TIMODE_DISABLED SPI_TIMODE_DISABLE +#define SPI_TIMODE_ENABLED SPI_TIMODE_ENABLE + +#define SPI_CRCCALCULATION_DISABLED SPI_CRCCALCULATION_DISABLE +#define SPI_CRCCALCULATION_ENABLED SPI_CRCCALCULATION_ENABLE + +#define SPI_NSS_PULSE_DISABLED SPI_NSS_PULSE_DISABLE +#define SPI_NSS_PULSE_ENABLED SPI_NSS_PULSE_ENABLE + +/** + * @} + */ + +/** @defgroup HAL_TIM_Aliased_Defines HAL TIM Aliased Defines maintained for legacy purpose + * @{ + */ +#define CCER_CCxE_MASK TIM_CCER_CCxE_MASK +#define CCER_CCxNE_MASK TIM_CCER_CCxNE_MASK + +#define TIM_DMABase_CR1 TIM_DMABASE_CR1 +#define TIM_DMABase_CR2 TIM_DMABASE_CR2 +#define TIM_DMABase_SMCR TIM_DMABASE_SMCR +#define TIM_DMABase_DIER TIM_DMABASE_DIER +#define TIM_DMABase_SR TIM_DMABASE_SR +#define TIM_DMABase_EGR TIM_DMABASE_EGR +#define TIM_DMABase_CCMR1 TIM_DMABASE_CCMR1 +#define TIM_DMABase_CCMR2 TIM_DMABASE_CCMR2 +#define TIM_DMABase_CCER TIM_DMABASE_CCER +#define TIM_DMABase_CNT TIM_DMABASE_CNT +#define TIM_DMABase_PSC TIM_DMABASE_PSC +#define TIM_DMABase_ARR TIM_DMABASE_ARR +#define TIM_DMABase_RCR TIM_DMABASE_RCR +#define TIM_DMABase_CCR1 TIM_DMABASE_CCR1 +#define TIM_DMABase_CCR2 TIM_DMABASE_CCR2 +#define TIM_DMABase_CCR3 TIM_DMABASE_CCR3 +#define TIM_DMABase_CCR4 TIM_DMABASE_CCR4 +#define TIM_DMABase_BDTR TIM_DMABASE_BDTR +#define TIM_DMABase_DCR TIM_DMABASE_DCR +#define TIM_DMABase_DMAR TIM_DMABASE_DMAR +#define TIM_DMABase_OR1 TIM_DMABASE_OR1 +#define TIM_DMABase_CCMR3 TIM_DMABASE_CCMR3 +#define TIM_DMABase_CCR5 TIM_DMABASE_CCR5 +#define TIM_DMABase_CCR6 TIM_DMABASE_CCR6 +#define TIM_DMABase_OR2 TIM_DMABASE_OR2 +#define TIM_DMABase_OR3 TIM_DMABASE_OR3 +#define TIM_DMABase_OR TIM_DMABASE_OR + +#define TIM_EventSource_Update TIM_EVENTSOURCE_UPDATE +#define TIM_EventSource_CC1 TIM_EVENTSOURCE_CC1 +#define TIM_EventSource_CC2 TIM_EVENTSOURCE_CC2 +#define TIM_EventSource_CC3 TIM_EVENTSOURCE_CC3 +#define TIM_EventSource_CC4 TIM_EVENTSOURCE_CC4 +#define TIM_EventSource_COM TIM_EVENTSOURCE_COM +#define TIM_EventSource_Trigger TIM_EVENTSOURCE_TRIGGER +#define TIM_EventSource_Break TIM_EVENTSOURCE_BREAK +#define TIM_EventSource_Break2 TIM_EVENTSOURCE_BREAK2 + +#define TIM_DMABurstLength_1Transfer TIM_DMABURSTLENGTH_1TRANSFER +#define TIM_DMABurstLength_2Transfers TIM_DMABURSTLENGTH_2TRANSFERS +#define TIM_DMABurstLength_3Transfers TIM_DMABURSTLENGTH_3TRANSFERS +#define TIM_DMABurstLength_4Transfers TIM_DMABURSTLENGTH_4TRANSFERS +#define TIM_DMABurstLength_5Transfers TIM_DMABURSTLENGTH_5TRANSFERS +#define TIM_DMABurstLength_6Transfers TIM_DMABURSTLENGTH_6TRANSFERS +#define TIM_DMABurstLength_7Transfers TIM_DMABURSTLENGTH_7TRANSFERS +#define TIM_DMABurstLength_8Transfers TIM_DMABURSTLENGTH_8TRANSFERS +#define TIM_DMABurstLength_9Transfers TIM_DMABURSTLENGTH_9TRANSFERS +#define TIM_DMABurstLength_10Transfers TIM_DMABURSTLENGTH_10TRANSFERS +#define TIM_DMABurstLength_11Transfers TIM_DMABURSTLENGTH_11TRANSFERS +#define TIM_DMABurstLength_12Transfers TIM_DMABURSTLENGTH_12TRANSFERS +#define TIM_DMABurstLength_13Transfers TIM_DMABURSTLENGTH_13TRANSFERS +#define TIM_DMABurstLength_14Transfers TIM_DMABURSTLENGTH_14TRANSFERS +#define TIM_DMABurstLength_15Transfers TIM_DMABURSTLENGTH_15TRANSFERS +#define TIM_DMABurstLength_16Transfers TIM_DMABURSTLENGTH_16TRANSFERS +#define TIM_DMABurstLength_17Transfers TIM_DMABURSTLENGTH_17TRANSFERS +#define TIM_DMABurstLength_18Transfers TIM_DMABURSTLENGTH_18TRANSFERS + +/** + * @} + */ + +/** @defgroup HAL_TSC_Aliased_Defines HAL TSC Aliased Defines maintained for legacy purpose + * @{ + */ +#define TSC_SYNC_POL_FALL TSC_SYNC_POLARITY_FALLING +#define TSC_SYNC_POL_RISE_HIGH TSC_SYNC_POLARITY_RISING +/** + * @} + */ + +/** @defgroup HAL_UART_Aliased_Defines HAL UART Aliased Defines maintained for legacy purpose + * @{ + */ +#define UART_ONEBIT_SAMPLING_DISABLED UART_ONE_BIT_SAMPLE_DISABLE +#define UART_ONEBIT_SAMPLING_ENABLED UART_ONE_BIT_SAMPLE_ENABLE +#define UART_ONE_BIT_SAMPLE_DISABLED UART_ONE_BIT_SAMPLE_DISABLE +#define UART_ONE_BIT_SAMPLE_ENABLED UART_ONE_BIT_SAMPLE_ENABLE + +#define __HAL_UART_ONEBIT_ENABLE __HAL_UART_ONE_BIT_SAMPLE_ENABLE +#define __HAL_UART_ONEBIT_DISABLE __HAL_UART_ONE_BIT_SAMPLE_DISABLE + +#define __DIV_SAMPLING16 UART_DIV_SAMPLING16 +#define __DIVMANT_SAMPLING16 UART_DIVMANT_SAMPLING16 +#define __DIVFRAQ_SAMPLING16 UART_DIVFRAQ_SAMPLING16 +#define __UART_BRR_SAMPLING16 UART_BRR_SAMPLING16 + +#define __DIV_SAMPLING8 UART_DIV_SAMPLING8 +#define __DIVMANT_SAMPLING8 UART_DIVMANT_SAMPLING8 +#define __DIVFRAQ_SAMPLING8 UART_DIVFRAQ_SAMPLING8 +#define __UART_BRR_SAMPLING8 UART_BRR_SAMPLING8 + +#define UART_WAKEUPMETHODE_IDLELINE UART_WAKEUPMETHOD_IDLELINE +#define UART_WAKEUPMETHODE_ADDRESSMARK UART_WAKEUPMETHOD_ADDRESSMARK + +/** + * @} + */ + + +/** @defgroup HAL_USART_Aliased_Defines HAL USART Aliased Defines maintained for legacy purpose + * @{ + */ + +#define USART_CLOCK_DISABLED USART_CLOCK_DISABLE +#define USART_CLOCK_ENABLED USART_CLOCK_ENABLE + +#define USARTNACK_ENABLED USART_NACK_ENABLE +#define USARTNACK_DISABLED USART_NACK_DISABLE +/** + * @} + */ + +/** @defgroup HAL_WWDG_Aliased_Defines HAL WWDG Aliased Defines maintained for legacy purpose + * @{ + */ +#define CFR_BASE WWDG_CFR_BASE + +/** + * @} + */ + +/** @defgroup HAL_CAN_Aliased_Defines HAL CAN Aliased Defines maintained for legacy purpose + * @{ + */ +#define CAN_FilterFIFO0 CAN_FILTER_FIFO0 +#define CAN_FilterFIFO1 CAN_FILTER_FIFO1 +#define CAN_IT_RQCP0 CAN_IT_TME +#define CAN_IT_RQCP1 CAN_IT_TME +#define CAN_IT_RQCP2 CAN_IT_TME +#define INAK_TIMEOUT CAN_TIMEOUT_VALUE +#define SLAK_TIMEOUT CAN_TIMEOUT_VALUE +#define CAN_TXSTATUS_FAILED ((uint8_t)0x00U) +#define CAN_TXSTATUS_OK ((uint8_t)0x01U) +#define CAN_TXSTATUS_PENDING ((uint8_t)0x02U) + +/** + * @} + */ + +/** @defgroup HAL_ETH_Aliased_Defines HAL ETH Aliased Defines maintained for legacy purpose + * @{ + */ + +#define VLAN_TAG ETH_VLAN_TAG +#define MIN_ETH_PAYLOAD ETH_MIN_ETH_PAYLOAD +#define MAX_ETH_PAYLOAD ETH_MAX_ETH_PAYLOAD +#define JUMBO_FRAME_PAYLOAD ETH_JUMBO_FRAME_PAYLOAD +#define MACMIIAR_CR_MASK ETH_MACMIIAR_CR_MASK +#define MACCR_CLEAR_MASK ETH_MACCR_CLEAR_MASK +#define MACFCR_CLEAR_MASK ETH_MACFCR_CLEAR_MASK +#define DMAOMR_CLEAR_MASK ETH_DMAOMR_CLEAR_MASK + +#define ETH_MMCCR ((uint32_t)0x00000100U) +#define ETH_MMCRIR ((uint32_t)0x00000104U) +#define ETH_MMCTIR ((uint32_t)0x00000108U) +#define ETH_MMCRIMR ((uint32_t)0x0000010CU) +#define ETH_MMCTIMR ((uint32_t)0x00000110U) +#define ETH_MMCTGFSCCR ((uint32_t)0x0000014CU) +#define ETH_MMCTGFMSCCR ((uint32_t)0x00000150U) +#define ETH_MMCTGFCR ((uint32_t)0x00000168U) +#define ETH_MMCRFCECR ((uint32_t)0x00000194U) +#define ETH_MMCRFAECR ((uint32_t)0x00000198U) +#define ETH_MMCRGUFCR ((uint32_t)0x000001C4U) + +#define ETH_MAC_TXFIFO_FULL ((uint32_t)0x02000000) /* Tx FIFO full */ +#define ETH_MAC_TXFIFONOT_EMPTY ((uint32_t)0x01000000) /* Tx FIFO not empty */ +#define ETH_MAC_TXFIFO_WRITE_ACTIVE ((uint32_t)0x00400000) /* Tx FIFO write active */ +#define ETH_MAC_TXFIFO_IDLE ((uint32_t)0x00000000) /* Tx FIFO read status: Idle */ +#define ETH_MAC_TXFIFO_READ ((uint32_t)0x00100000) /* Tx FIFO read status: Read (transferring data to the MAC transmitter) */ +#define ETH_MAC_TXFIFO_WAITING ((uint32_t)0x00200000) /* Tx FIFO read status: Waiting for TxStatus from MAC transmitter */ +#define ETH_MAC_TXFIFO_WRITING ((uint32_t)0x00300000) /* Tx FIFO read status: Writing the received TxStatus or flushing the TxFIFO */ +#define ETH_MAC_TRANSMISSION_PAUSE ((uint32_t)0x00080000) /* MAC transmitter in pause */ +#define ETH_MAC_TRANSMITFRAMECONTROLLER_IDLE ((uint32_t)0x00000000) /* MAC transmit frame controller: Idle */ +#define ETH_MAC_TRANSMITFRAMECONTROLLER_WAITING ((uint32_t)0x00020000) /* MAC transmit frame controller: Waiting for Status of previous frame or IFG/backoff period to be over */ +#define ETH_MAC_TRANSMITFRAMECONTROLLER_GENRATING_PCF ((uint32_t)0x00040000) /* MAC transmit frame controller: Generating and transmitting a Pause control frame (in full duplex mode) */ +#define ETH_MAC_TRANSMITFRAMECONTROLLER_TRANSFERRING ((uint32_t)0x00060000) /* MAC transmit frame controller: Transferring input frame for transmission */ +#define ETH_MAC_MII_TRANSMIT_ACTIVE ((uint32_t)0x00010000) /* MAC MII transmit engine active */ +#define ETH_MAC_RXFIFO_EMPTY ((uint32_t)0x00000000) /* Rx FIFO fill level: empty */ +#define ETH_MAC_RXFIFO_BELOW_THRESHOLD ((uint32_t)0x00000100) /* Rx FIFO fill level: fill-level below flow-control de-activate threshold */ +#define ETH_MAC_RXFIFO_ABOVE_THRESHOLD ((uint32_t)0x00000200) /* Rx FIFO fill level: fill-level above flow-control activate threshold */ +#define ETH_MAC_RXFIFO_FULL ((uint32_t)0x00000300) /* Rx FIFO fill level: full */ +#if defined(STM32F1) +#else +#define ETH_MAC_READCONTROLLER_IDLE ((uint32_t)0x00000000) /* Rx FIFO read controller IDLE state */ +#define ETH_MAC_READCONTROLLER_READING_DATA ((uint32_t)0x00000020) /* Rx FIFO read controller Reading frame data */ +#define ETH_MAC_READCONTROLLER_READING_STATUS ((uint32_t)0x00000040) /* Rx FIFO read controller Reading frame status (or time-stamp) */ +#endif +#define ETH_MAC_READCONTROLLER_FLUSHING ((uint32_t)0x00000060) /* Rx FIFO read controller Flushing the frame data and status */ +#define ETH_MAC_RXFIFO_WRITE_ACTIVE ((uint32_t)0x00000010) /* Rx FIFO write controller active */ +#define ETH_MAC_SMALL_FIFO_NOTACTIVE ((uint32_t)0x00000000) /* MAC small FIFO read / write controllers not active */ +#define ETH_MAC_SMALL_FIFO_READ_ACTIVE ((uint32_t)0x00000002) /* MAC small FIFO read controller active */ +#define ETH_MAC_SMALL_FIFO_WRITE_ACTIVE ((uint32_t)0x00000004) /* MAC small FIFO write controller active */ +#define ETH_MAC_SMALL_FIFO_RW_ACTIVE ((uint32_t)0x00000006) /* MAC small FIFO read / write controllers active */ +#define ETH_MAC_MII_RECEIVE_PROTOCOL_ACTIVE ((uint32_t)0x00000001) /* MAC MII receive protocol engine active */ + +/** + * @} + */ + +/** @defgroup HAL_DCMI_Aliased_Defines HAL DCMI Aliased Defines maintained for legacy purpose + * @{ + */ +#define HAL_DCMI_ERROR_OVF HAL_DCMI_ERROR_OVR +#define DCMI_IT_OVF DCMI_IT_OVR +#define DCMI_FLAG_OVFRI DCMI_FLAG_OVRRI +#define DCMI_FLAG_OVFMI DCMI_FLAG_OVRMI + +#define HAL_DCMI_ConfigCROP HAL_DCMI_ConfigCrop +#define HAL_DCMI_EnableCROP HAL_DCMI_EnableCrop +#define HAL_DCMI_DisableCROP HAL_DCMI_DisableCrop + +/** + * @} + */ + +#if defined(STM32L4xx) || defined(STM32F7) || defined(STM32F427xx) || defined(STM32F437xx) ||\ + defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) +/** @defgroup HAL_DMA2D_Aliased_Defines HAL DMA2D Aliased Defines maintained for legacy purpose + * @{ + */ +#define DMA2D_ARGB8888 DMA2D_OUTPUT_ARGB8888 +#define DMA2D_RGB888 DMA2D_OUTPUT_RGB888 +#define DMA2D_RGB565 DMA2D_OUTPUT_RGB565 +#define DMA2D_ARGB1555 DMA2D_OUTPUT_ARGB1555 +#define DMA2D_ARGB4444 DMA2D_OUTPUT_ARGB4444 + +#define CM_ARGB8888 DMA2D_INPUT_ARGB8888 +#define CM_RGB888 DMA2D_INPUT_RGB888 +#define CM_RGB565 DMA2D_INPUT_RGB565 +#define CM_ARGB1555 DMA2D_INPUT_ARGB1555 +#define CM_ARGB4444 DMA2D_INPUT_ARGB4444 +#define CM_L8 DMA2D_INPUT_L8 +#define CM_AL44 DMA2D_INPUT_AL44 +#define CM_AL88 DMA2D_INPUT_AL88 +#define CM_L4 DMA2D_INPUT_L4 +#define CM_A8 DMA2D_INPUT_A8 +#define CM_A4 DMA2D_INPUT_A4 +/** + * @} + */ +#endif /* STM32L4xx || STM32F7*/ + +/** @defgroup HAL_PPP_Aliased_Defines HAL PPP Aliased Defines maintained for legacy purpose + * @{ + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup HAL_CRYP_Aliased_Functions HAL CRYP Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_CRYP_ComputationCpltCallback HAL_CRYPEx_ComputationCpltCallback +/** + * @} + */ + +/** @defgroup HAL_HASH_Aliased_Functions HAL HASH Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_HASH_STATETypeDef HAL_HASH_StateTypeDef +#define HAL_HASHPhaseTypeDef HAL_HASH_PhaseTypeDef +#define HAL_HMAC_MD5_Finish HAL_HASH_MD5_Finish +#define HAL_HMAC_SHA1_Finish HAL_HASH_SHA1_Finish +#define HAL_HMAC_SHA224_Finish HAL_HASH_SHA224_Finish +#define HAL_HMAC_SHA256_Finish HAL_HASH_SHA256_Finish + +/*HASH Algorithm Selection*/ + +#define HASH_AlgoSelection_SHA1 HASH_ALGOSELECTION_SHA1 +#define HASH_AlgoSelection_SHA224 HASH_ALGOSELECTION_SHA224 +#define HASH_AlgoSelection_SHA256 HASH_ALGOSELECTION_SHA256 +#define HASH_AlgoSelection_MD5 HASH_ALGOSELECTION_MD5 + +#define HASH_AlgoMode_HASH HASH_ALGOMODE_HASH +#define HASH_AlgoMode_HMAC HASH_ALGOMODE_HMAC + +#define HASH_HMACKeyType_ShortKey HASH_HMAC_KEYTYPE_SHORTKEY +#define HASH_HMACKeyType_LongKey HASH_HMAC_KEYTYPE_LONGKEY +/** + * @} + */ + +/** @defgroup HAL_Aliased_Functions HAL Generic Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_EnableDBGSleepMode HAL_DBGMCU_EnableDBGSleepMode +#define HAL_DisableDBGSleepMode HAL_DBGMCU_DisableDBGSleepMode +#define HAL_EnableDBGStopMode HAL_DBGMCU_EnableDBGStopMode +#define HAL_DisableDBGStopMode HAL_DBGMCU_DisableDBGStopMode +#define HAL_EnableDBGStandbyMode HAL_DBGMCU_EnableDBGStandbyMode +#define HAL_DisableDBGStandbyMode HAL_DBGMCU_DisableDBGStandbyMode +#define HAL_DBG_LowPowerConfig(Periph, cmd) (((cmd)==ENABLE)? HAL_DBGMCU_DBG_EnableLowPowerConfig(Periph) : HAL_DBGMCU_DBG_DisableLowPowerConfig(Periph)) +#define HAL_VREFINT_OutputSelect HAL_SYSCFG_VREFINT_OutputSelect +#define HAL_Lock_Cmd(cmd) (((cmd)==ENABLE) ? HAL_SYSCFG_Enable_Lock_VREFINT() : HAL_SYSCFG_Disable_Lock_VREFINT()) +#if defined(STM32L0) +#else +#define HAL_VREFINT_Cmd(cmd) (((cmd)==ENABLE)? HAL_SYSCFG_EnableVREFINT() : HAL_SYSCFG_DisableVREFINT()) +#endif +#define HAL_ADC_EnableBuffer_Cmd(cmd) (((cmd)==ENABLE) ? HAL_ADCEx_EnableVREFINT() : HAL_ADCEx_DisableVREFINT()) +#define HAL_ADC_EnableBufferSensor_Cmd(cmd) (((cmd)==ENABLE) ? HAL_ADCEx_EnableVREFINTTempSensor() : HAL_ADCEx_DisableVREFINTTempSensor()) +/** + * @} + */ + +/** @defgroup HAL_FLASH_Aliased_Functions HAL FLASH Aliased Functions maintained for legacy purpose + * @{ + */ +#define FLASH_HalfPageProgram HAL_FLASHEx_HalfPageProgram +#define FLASH_EnableRunPowerDown HAL_FLASHEx_EnableRunPowerDown +#define FLASH_DisableRunPowerDown HAL_FLASHEx_DisableRunPowerDown +#define HAL_DATA_EEPROMEx_Unlock HAL_FLASHEx_DATAEEPROM_Unlock +#define HAL_DATA_EEPROMEx_Lock HAL_FLASHEx_DATAEEPROM_Lock +#define HAL_DATA_EEPROMEx_Erase HAL_FLASHEx_DATAEEPROM_Erase +#define HAL_DATA_EEPROMEx_Program HAL_FLASHEx_DATAEEPROM_Program + + /** + * @} + */ + +/** @defgroup HAL_I2C_Aliased_Functions HAL I2C Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_I2CEx_AnalogFilter_Config HAL_I2CEx_ConfigAnalogFilter +#define HAL_I2CEx_DigitalFilter_Config HAL_I2CEx_ConfigDigitalFilter +#define HAL_FMPI2CEx_AnalogFilter_Config HAL_FMPI2CEx_ConfigAnalogFilter +#define HAL_FMPI2CEx_DigitalFilter_Config HAL_FMPI2CEx_ConfigDigitalFilter + +#define HAL_I2CFastModePlusConfig(SYSCFG_I2CFastModePlus, cmd) (((cmd)==ENABLE)? HAL_I2CEx_EnableFastModePlus(SYSCFG_I2CFastModePlus): HAL_I2CEx_DisableFastModePlus(SYSCFG_I2CFastModePlus)) + /** + * @} + */ + +/** @defgroup HAL_PWR_Aliased HAL PWR Aliased maintained for legacy purpose + * @{ + */ +#define HAL_PWR_PVDConfig HAL_PWR_ConfigPVD +#define HAL_PWR_DisableBkUpReg HAL_PWREx_DisableBkUpReg +#define HAL_PWR_DisableFlashPowerDown HAL_PWREx_DisableFlashPowerDown +#define HAL_PWR_DisableVddio2Monitor HAL_PWREx_DisableVddio2Monitor +#define HAL_PWR_EnableBkUpReg HAL_PWREx_EnableBkUpReg +#define HAL_PWR_EnableFlashPowerDown HAL_PWREx_EnableFlashPowerDown +#define HAL_PWR_EnableVddio2Monitor HAL_PWREx_EnableVddio2Monitor +#define HAL_PWR_PVD_PVM_IRQHandler HAL_PWREx_PVD_PVM_IRQHandler +#define HAL_PWR_PVDLevelConfig HAL_PWR_ConfigPVD +#define HAL_PWR_Vddio2Monitor_IRQHandler HAL_PWREx_Vddio2Monitor_IRQHandler +#define HAL_PWR_Vddio2MonitorCallback HAL_PWREx_Vddio2MonitorCallback +#define HAL_PWREx_ActivateOverDrive HAL_PWREx_EnableOverDrive +#define HAL_PWREx_DeactivateOverDrive HAL_PWREx_DisableOverDrive +#define HAL_PWREx_DisableSDADCAnalog HAL_PWREx_DisableSDADC +#define HAL_PWREx_EnableSDADCAnalog HAL_PWREx_EnableSDADC +#define HAL_PWREx_PVMConfig HAL_PWREx_ConfigPVM + +#define PWR_MODE_NORMAL PWR_PVD_MODE_NORMAL +#define PWR_MODE_IT_RISING PWR_PVD_MODE_IT_RISING +#define PWR_MODE_IT_FALLING PWR_PVD_MODE_IT_FALLING +#define PWR_MODE_IT_RISING_FALLING PWR_PVD_MODE_IT_RISING_FALLING +#define PWR_MODE_EVENT_RISING PWR_PVD_MODE_EVENT_RISING +#define PWR_MODE_EVENT_FALLING PWR_PVD_MODE_EVENT_FALLING +#define PWR_MODE_EVENT_RISING_FALLING PWR_PVD_MODE_EVENT_RISING_FALLING + +#define CR_OFFSET_BB PWR_CR_OFFSET_BB +#define CSR_OFFSET_BB PWR_CSR_OFFSET_BB + +#define DBP_BitNumber DBP_BIT_NUMBER +#define PVDE_BitNumber PVDE_BIT_NUMBER +#define PMODE_BitNumber PMODE_BIT_NUMBER +#define EWUP_BitNumber EWUP_BIT_NUMBER +#define FPDS_BitNumber FPDS_BIT_NUMBER +#define ODEN_BitNumber ODEN_BIT_NUMBER +#define ODSWEN_BitNumber ODSWEN_BIT_NUMBER +#define MRLVDS_BitNumber MRLVDS_BIT_NUMBER +#define LPLVDS_BitNumber LPLVDS_BIT_NUMBER +#define BRE_BitNumber BRE_BIT_NUMBER + +#define PWR_MODE_EVT PWR_PVD_MODE_NORMAL + + /** + * @} + */ + +/** @defgroup HAL_SMBUS_Aliased_Functions HAL SMBUS Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_SMBUS_Slave_Listen_IT HAL_SMBUS_EnableListen_IT +#define HAL_SMBUS_SlaveAddrCallback HAL_SMBUS_AddrCallback +#define HAL_SMBUS_SlaveListenCpltCallback HAL_SMBUS_ListenCpltCallback +/** + * @} + */ + +/** @defgroup HAL_SPI_Aliased_Functions HAL SPI Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_SPI_FlushRxFifo HAL_SPIEx_FlushRxFifo +/** + * @} + */ + +/** @defgroup HAL_TIM_Aliased_Functions HAL TIM Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_TIM_DMADelayPulseCplt TIM_DMADelayPulseCplt +#define HAL_TIM_DMAError TIM_DMAError +#define HAL_TIM_DMACaptureCplt TIM_DMACaptureCplt +#define HAL_TIMEx_DMACommutationCplt TIMEx_DMACommutationCplt +/** + * @} + */ + +/** @defgroup HAL_UART_Aliased_Functions HAL UART Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_UART_WakeupCallback HAL_UARTEx_WakeupCallback +/** + * @} + */ + +/** @defgroup HAL_LTDC_Aliased_Functions HAL LTDC Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_LTDC_LineEvenCallback HAL_LTDC_LineEventCallback +/** + * @} + */ + + +/** @defgroup HAL_PPP_Aliased_Functions HAL PPP Aliased Functions maintained for legacy purpose + * @{ + */ + +/** + * @} + */ + +/* Exported macros ------------------------------------------------------------*/ + +/** @defgroup HAL_AES_Aliased_Macros HAL CRYP Aliased Macros maintained for legacy purpose + * @{ + */ +#define AES_IT_CC CRYP_IT_CC +#define AES_IT_ERR CRYP_IT_ERR +#define AES_FLAG_CCF CRYP_FLAG_CCF +/** + * @} + */ + +/** @defgroup HAL_Aliased_Macros HAL Generic Aliased Macros maintained for legacy purpose + * @{ + */ +#define __HAL_GET_BOOT_MODE __HAL_SYSCFG_GET_BOOT_MODE +#define __HAL_REMAPMEMORY_FLASH __HAL_SYSCFG_REMAPMEMORY_FLASH +#define __HAL_REMAPMEMORY_SYSTEMFLASH __HAL_SYSCFG_REMAPMEMORY_SYSTEMFLASH +#define __HAL_REMAPMEMORY_SRAM __HAL_SYSCFG_REMAPMEMORY_SRAM +#define __HAL_REMAPMEMORY_FMC __HAL_SYSCFG_REMAPMEMORY_FMC +#define __HAL_REMAPMEMORY_FMC_SDRAM __HAL_SYSCFG_REMAPMEMORY_FMC_SDRAM +#define __HAL_REMAPMEMORY_FSMC __HAL_SYSCFG_REMAPMEMORY_FSMC +#define __HAL_REMAPMEMORY_QUADSPI __HAL_SYSCFG_REMAPMEMORY_QUADSPI +#define __HAL_FMC_BANK __HAL_SYSCFG_FMC_BANK +#define __HAL_GET_FLAG __HAL_SYSCFG_GET_FLAG +#define __HAL_CLEAR_FLAG __HAL_SYSCFG_CLEAR_FLAG +#define __HAL_VREFINT_OUT_ENABLE __HAL_SYSCFG_VREFINT_OUT_ENABLE +#define __HAL_VREFINT_OUT_DISABLE __HAL_SYSCFG_VREFINT_OUT_DISABLE + +#define SYSCFG_FLAG_VREF_READY SYSCFG_FLAG_VREFINT_READY +#define SYSCFG_FLAG_RC48 RCC_FLAG_HSI48 +#define IS_SYSCFG_FASTMODEPLUS_CONFIG IS_I2C_FASTMODEPLUS +#define UFB_MODE_BitNumber UFB_MODE_BIT_NUMBER +#define CMP_PD_BitNumber CMP_PD_BIT_NUMBER + +/** + * @} + */ + + +/** @defgroup HAL_ADC_Aliased_Macros HAL ADC Aliased Macros maintained for legacy purpose + * @{ + */ +#define __ADC_ENABLE __HAL_ADC_ENABLE +#define __ADC_DISABLE __HAL_ADC_DISABLE +#define __HAL_ADC_ENABLING_CONDITIONS ADC_ENABLING_CONDITIONS +#define __HAL_ADC_DISABLING_CONDITIONS ADC_DISABLING_CONDITIONS +#define __HAL_ADC_IS_ENABLED ADC_IS_ENABLE +#define __ADC_IS_ENABLED ADC_IS_ENABLE +#define __HAL_ADC_IS_SOFTWARE_START_REGULAR ADC_IS_SOFTWARE_START_REGULAR +#define __HAL_ADC_IS_SOFTWARE_START_INJECTED ADC_IS_SOFTWARE_START_INJECTED +#define __HAL_ADC_IS_CONVERSION_ONGOING_REGULAR_INJECTED ADC_IS_CONVERSION_ONGOING_REGULAR_INJECTED +#define __HAL_ADC_IS_CONVERSION_ONGOING_REGULAR ADC_IS_CONVERSION_ONGOING_REGULAR +#define __HAL_ADC_IS_CONVERSION_ONGOING_INJECTED ADC_IS_CONVERSION_ONGOING_INJECTED +#define __HAL_ADC_IS_CONVERSION_ONGOING ADC_IS_CONVERSION_ONGOING +#define __HAL_ADC_CLEAR_ERRORCODE ADC_CLEAR_ERRORCODE + +#define __HAL_ADC_GET_RESOLUTION ADC_GET_RESOLUTION +#define __HAL_ADC_JSQR_RK ADC_JSQR_RK +#define __HAL_ADC_CFGR_AWD1CH ADC_CFGR_AWD1CH_SHIFT +#define __HAL_ADC_CFGR_AWD23CR ADC_CFGR_AWD23CR +#define __HAL_ADC_CFGR_INJECT_AUTO_CONVERSION ADC_CFGR_INJECT_AUTO_CONVERSION +#define __HAL_ADC_CFGR_INJECT_CONTEXT_QUEUE ADC_CFGR_INJECT_CONTEXT_QUEUE +#define __HAL_ADC_CFGR_INJECT_DISCCONTINUOUS ADC_CFGR_INJECT_DISCCONTINUOUS +#define __HAL_ADC_CFGR_REG_DISCCONTINUOUS ADC_CFGR_REG_DISCCONTINUOUS +#define __HAL_ADC_CFGR_DISCONTINUOUS_NUM ADC_CFGR_DISCONTINUOUS_NUM +#define __HAL_ADC_CFGR_AUTOWAIT ADC_CFGR_AUTOWAIT +#define __HAL_ADC_CFGR_CONTINUOUS ADC_CFGR_CONTINUOUS +#define __HAL_ADC_CFGR_OVERRUN ADC_CFGR_OVERRUN +#define __HAL_ADC_CFGR_DMACONTREQ ADC_CFGR_DMACONTREQ +#define __HAL_ADC_CFGR_EXTSEL ADC_CFGR_EXTSEL_SET +#define __HAL_ADC_JSQR_JEXTSEL ADC_JSQR_JEXTSEL_SET +#define __HAL_ADC_OFR_CHANNEL ADC_OFR_CHANNEL +#define __HAL_ADC_DIFSEL_CHANNEL ADC_DIFSEL_CHANNEL +#define __HAL_ADC_CALFACT_DIFF_SET ADC_CALFACT_DIFF_SET +#define __HAL_ADC_CALFACT_DIFF_GET ADC_CALFACT_DIFF_GET +#define __HAL_ADC_TRX_HIGHTHRESHOLD ADC_TRX_HIGHTHRESHOLD + +#define __HAL_ADC_OFFSET_SHIFT_RESOLUTION ADC_OFFSET_SHIFT_RESOLUTION +#define __HAL_ADC_AWD1THRESHOLD_SHIFT_RESOLUTION ADC_AWD1THRESHOLD_SHIFT_RESOLUTION +#define __HAL_ADC_AWD23THRESHOLD_SHIFT_RESOLUTION ADC_AWD23THRESHOLD_SHIFT_RESOLUTION +#define __HAL_ADC_COMMON_REGISTER ADC_COMMON_REGISTER +#define __HAL_ADC_COMMON_CCR_MULTI ADC_COMMON_CCR_MULTI +#define __HAL_ADC_MULTIMODE_IS_ENABLED ADC_MULTIMODE_IS_ENABLE +#define __ADC_MULTIMODE_IS_ENABLED ADC_MULTIMODE_IS_ENABLE +#define __HAL_ADC_NONMULTIMODE_OR_MULTIMODEMASTER ADC_NONMULTIMODE_OR_MULTIMODEMASTER +#define __HAL_ADC_COMMON_ADC_OTHER ADC_COMMON_ADC_OTHER +#define __HAL_ADC_MULTI_SLAVE ADC_MULTI_SLAVE + +#define __HAL_ADC_SQR1_L ADC_SQR1_L_SHIFT +#define __HAL_ADC_JSQR_JL ADC_JSQR_JL_SHIFT +#define __HAL_ADC_JSQR_RK_JL ADC_JSQR_RK_JL +#define __HAL_ADC_CR1_DISCONTINUOUS_NUM ADC_CR1_DISCONTINUOUS_NUM +#define __HAL_ADC_CR1_SCAN ADC_CR1_SCAN_SET +#define __HAL_ADC_CONVCYCLES_MAX_RANGE ADC_CONVCYCLES_MAX_RANGE +#define __HAL_ADC_CLOCK_PRESCALER_RANGE ADC_CLOCK_PRESCALER_RANGE +#define __HAL_ADC_GET_CLOCK_PRESCALER ADC_GET_CLOCK_PRESCALER + +#define __HAL_ADC_SQR1 ADC_SQR1 +#define __HAL_ADC_SMPR1 ADC_SMPR1 +#define __HAL_ADC_SMPR2 ADC_SMPR2 +#define __HAL_ADC_SQR3_RK ADC_SQR3_RK +#define __HAL_ADC_SQR2_RK ADC_SQR2_RK +#define __HAL_ADC_SQR1_RK ADC_SQR1_RK +#define __HAL_ADC_CR2_CONTINUOUS ADC_CR2_CONTINUOUS +#define __HAL_ADC_CR1_DISCONTINUOUS ADC_CR1_DISCONTINUOUS +#define __HAL_ADC_CR1_SCANCONV ADC_CR1_SCANCONV +#define __HAL_ADC_CR2_EOCSelection ADC_CR2_EOCSelection +#define __HAL_ADC_CR2_DMAContReq ADC_CR2_DMAContReq +#define __HAL_ADC_GET_RESOLUTION ADC_GET_RESOLUTION +#define __HAL_ADC_JSQR ADC_JSQR + +#define __HAL_ADC_CHSELR_CHANNEL ADC_CHSELR_CHANNEL +#define __HAL_ADC_CFGR1_REG_DISCCONTINUOUS ADC_CFGR1_REG_DISCCONTINUOUS +#define __HAL_ADC_CFGR1_AUTOOFF ADC_CFGR1_AUTOOFF +#define __HAL_ADC_CFGR1_AUTOWAIT ADC_CFGR1_AUTOWAIT +#define __HAL_ADC_CFGR1_CONTINUOUS ADC_CFGR1_CONTINUOUS +#define __HAL_ADC_CFGR1_OVERRUN ADC_CFGR1_OVERRUN +#define __HAL_ADC_CFGR1_SCANDIR ADC_CFGR1_SCANDIR +#define __HAL_ADC_CFGR1_DMACONTREQ ADC_CFGR1_DMACONTREQ + +/** + * @} + */ + +/** @defgroup HAL_DAC_Aliased_Macros HAL DAC Aliased Macros maintained for legacy purpose + * @{ + */ +#define __HAL_DHR12R1_ALIGNEMENT DAC_DHR12R1_ALIGNMENT +#define __HAL_DHR12R2_ALIGNEMENT DAC_DHR12R2_ALIGNMENT +#define __HAL_DHR12RD_ALIGNEMENT DAC_DHR12RD_ALIGNMENT +#define IS_DAC_GENERATE_WAVE IS_DAC_WAVE + +/** + * @} + */ + +/** @defgroup HAL_DBGMCU_Aliased_Macros HAL DBGMCU Aliased Macros maintained for legacy purpose + * @{ + */ +#define __HAL_FREEZE_TIM1_DBGMCU __HAL_DBGMCU_FREEZE_TIM1 +#define __HAL_UNFREEZE_TIM1_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM1 +#define __HAL_FREEZE_TIM2_DBGMCU __HAL_DBGMCU_FREEZE_TIM2 +#define __HAL_UNFREEZE_TIM2_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM2 +#define __HAL_FREEZE_TIM3_DBGMCU __HAL_DBGMCU_FREEZE_TIM3 +#define __HAL_UNFREEZE_TIM3_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM3 +#define __HAL_FREEZE_TIM4_DBGMCU __HAL_DBGMCU_FREEZE_TIM4 +#define __HAL_UNFREEZE_TIM4_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM4 +#define __HAL_FREEZE_TIM5_DBGMCU __HAL_DBGMCU_FREEZE_TIM5 +#define __HAL_UNFREEZE_TIM5_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM5 +#define __HAL_FREEZE_TIM6_DBGMCU __HAL_DBGMCU_FREEZE_TIM6 +#define __HAL_UNFREEZE_TIM6_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM6 +#define __HAL_FREEZE_TIM7_DBGMCU __HAL_DBGMCU_FREEZE_TIM7 +#define __HAL_UNFREEZE_TIM7_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM7 +#define __HAL_FREEZE_TIM8_DBGMCU __HAL_DBGMCU_FREEZE_TIM8 +#define __HAL_UNFREEZE_TIM8_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM8 + +#define __HAL_FREEZE_TIM9_DBGMCU __HAL_DBGMCU_FREEZE_TIM9 +#define __HAL_UNFREEZE_TIM9_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM9 +#define __HAL_FREEZE_TIM10_DBGMCU __HAL_DBGMCU_FREEZE_TIM10 +#define __HAL_UNFREEZE_TIM10_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM10 +#define __HAL_FREEZE_TIM11_DBGMCU __HAL_DBGMCU_FREEZE_TIM11 +#define __HAL_UNFREEZE_TIM11_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM11 +#define __HAL_FREEZE_TIM12_DBGMCU __HAL_DBGMCU_FREEZE_TIM12 +#define __HAL_UNFREEZE_TIM12_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM12 +#define __HAL_FREEZE_TIM13_DBGMCU __HAL_DBGMCU_FREEZE_TIM13 +#define __HAL_UNFREEZE_TIM13_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM13 +#define __HAL_FREEZE_TIM14_DBGMCU __HAL_DBGMCU_FREEZE_TIM14 +#define __HAL_UNFREEZE_TIM14_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM14 +#define __HAL_FREEZE_CAN2_DBGMCU __HAL_DBGMCU_FREEZE_CAN2 +#define __HAL_UNFREEZE_CAN2_DBGMCU __HAL_DBGMCU_UNFREEZE_CAN2 + + +#define __HAL_FREEZE_TIM15_DBGMCU __HAL_DBGMCU_FREEZE_TIM15 +#define __HAL_UNFREEZE_TIM15_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM15 +#define __HAL_FREEZE_TIM16_DBGMCU __HAL_DBGMCU_FREEZE_TIM16 +#define __HAL_UNFREEZE_TIM16_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM16 +#define __HAL_FREEZE_TIM17_DBGMCU __HAL_DBGMCU_FREEZE_TIM17 +#define __HAL_UNFREEZE_TIM17_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM17 +#define __HAL_FREEZE_RTC_DBGMCU __HAL_DBGMCU_FREEZE_RTC +#define __HAL_UNFREEZE_RTC_DBGMCU __HAL_DBGMCU_UNFREEZE_RTC +#define __HAL_FREEZE_WWDG_DBGMCU __HAL_DBGMCU_FREEZE_WWDG +#define __HAL_UNFREEZE_WWDG_DBGMCU __HAL_DBGMCU_UNFREEZE_WWDG +#define __HAL_FREEZE_IWDG_DBGMCU __HAL_DBGMCU_FREEZE_IWDG +#define __HAL_UNFREEZE_IWDG_DBGMCU __HAL_DBGMCU_UNFREEZE_IWDG +#define __HAL_FREEZE_I2C1_TIMEOUT_DBGMCU __HAL_DBGMCU_FREEZE_I2C1_TIMEOUT +#define __HAL_UNFREEZE_I2C1_TIMEOUT_DBGMCU __HAL_DBGMCU_UNFREEZE_I2C1_TIMEOUT +#define __HAL_FREEZE_I2C2_TIMEOUT_DBGMCU __HAL_DBGMCU_FREEZE_I2C2_TIMEOUT +#define __HAL_UNFREEZE_I2C2_TIMEOUT_DBGMCU __HAL_DBGMCU_UNFREEZE_I2C2_TIMEOUT +#define __HAL_FREEZE_I2C3_TIMEOUT_DBGMCU __HAL_DBGMCU_FREEZE_I2C3_TIMEOUT +#define __HAL_UNFREEZE_I2C3_TIMEOUT_DBGMCU __HAL_DBGMCU_UNFREEZE_I2C3_TIMEOUT +#define __HAL_FREEZE_CAN1_DBGMCU __HAL_DBGMCU_FREEZE_CAN1 +#define __HAL_UNFREEZE_CAN1_DBGMCU __HAL_DBGMCU_UNFREEZE_CAN1 +#define __HAL_FREEZE_LPTIM1_DBGMCU __HAL_DBGMCU_FREEZE_LPTIM1 +#define __HAL_UNFREEZE_LPTIM1_DBGMCU __HAL_DBGMCU_UNFREEZE_LPTIM1 +#define __HAL_FREEZE_LPTIM2_DBGMCU __HAL_DBGMCU_FREEZE_LPTIM2 +#define __HAL_UNFREEZE_LPTIM2_DBGMCU __HAL_DBGMCU_UNFREEZE_LPTIM2 + +/** + * @} + */ + +/** @defgroup HAL_COMP_Aliased_Macros HAL COMP Aliased Macros maintained for legacy purpose + * @{ + */ +#if defined(STM32F3) +#define COMP_START __HAL_COMP_ENABLE +#define COMP_STOP __HAL_COMP_DISABLE +#define COMP_LOCK __HAL_COMP_LOCK + +#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) || defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx) +#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_RISING_EDGE() : \ + __HAL_COMP_COMP6_EXTI_ENABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_RISING_EDGE() : \ + __HAL_COMP_COMP6_EXTI_DISABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP6_EXTI_ENABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP6_EXTI_DISABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_IT() : \ + __HAL_COMP_COMP6_EXTI_ENABLE_IT()) +#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_IT() : \ + __HAL_COMP_COMP6_EXTI_DISABLE_IT()) +#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_GET_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_GET_FLAG() : \ + __HAL_COMP_COMP6_EXTI_GET_FLAG()) +#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_CLEAR_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_CLEAR_FLAG() : \ + __HAL_COMP_COMP6_EXTI_CLEAR_FLAG()) +# endif +# if defined(STM32F302xE) || defined(STM32F302xC) +#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_RISING_EDGE() : \ + __HAL_COMP_COMP6_EXTI_ENABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_RISING_EDGE() : \ + __HAL_COMP_COMP6_EXTI_DISABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP6_EXTI_ENABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP6_EXTI_DISABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_IT() : \ + __HAL_COMP_COMP6_EXTI_ENABLE_IT()) +#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_IT() : \ + __HAL_COMP_COMP6_EXTI_DISABLE_IT()) +#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_GET_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_GET_FLAG() : \ + __HAL_COMP_COMP6_EXTI_GET_FLAG()) +#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_CLEAR_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_CLEAR_FLAG() : \ + __HAL_COMP_COMP6_EXTI_CLEAR_FLAG()) +# endif +# if defined(STM32F303xE) || defined(STM32F398xx) || defined(STM32F303xC) || defined(STM32F358xx) +#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_ENABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_ENABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_ENABLE_RISING_EDGE() : \ + __HAL_COMP_COMP7_EXTI_ENABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_DISABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_DISABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_DISABLE_RISING_EDGE() : \ + __HAL_COMP_COMP7_EXTI_DISABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_ENABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_ENABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_ENABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP7_EXTI_ENABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_DISABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_DISABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_DISABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP7_EXTI_DISABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_ENABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_ENABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_ENABLE_IT() : \ + __HAL_COMP_COMP7_EXTI_ENABLE_IT()) +#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_DISABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_DISABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_DISABLE_IT() : \ + __HAL_COMP_COMP7_EXTI_DISABLE_IT()) +#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_GET_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_GET_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_GET_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_GET_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_GET_FLAG() : \ + __HAL_COMP_COMP7_EXTI_GET_FLAG()) +#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_CLEAR_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_CLEAR_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_CLEAR_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_CLEAR_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_CLEAR_FLAG() : \ + __HAL_COMP_COMP7_EXTI_CLEAR_FLAG()) +# endif +# if defined(STM32F373xC) ||defined(STM32F378xx) +#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \ + __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \ + __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \ + __HAL_COMP_COMP2_EXTI_ENABLE_IT()) +#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \ + __HAL_COMP_COMP2_EXTI_DISABLE_IT()) +#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \ + __HAL_COMP_COMP2_EXTI_GET_FLAG()) +#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \ + __HAL_COMP_COMP2_EXTI_CLEAR_FLAG()) +# endif +#else +#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \ + __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \ + __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \ + __HAL_COMP_COMP2_EXTI_ENABLE_IT()) +#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \ + __HAL_COMP_COMP2_EXTI_DISABLE_IT()) +#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \ + __HAL_COMP_COMP2_EXTI_GET_FLAG()) +#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \ + __HAL_COMP_COMP2_EXTI_CLEAR_FLAG()) +#endif + +#define __HAL_COMP_GET_EXTI_LINE COMP_GET_EXTI_LINE + +#if defined(STM32L0) || defined(STM32L4) +/* Note: On these STM32 families, the only argument of this macro */ +/* is COMP_FLAG_LOCK. */ +/* This macro is replaced by __HAL_COMP_IS_LOCKED with only HAL handle */ +/* argument. */ +#define __HAL_COMP_GET_FLAG(__HANDLE__, __FLAG__) (__HAL_COMP_IS_LOCKED(__HANDLE__)) +#endif +/** + * @} + */ + +#if defined(STM32L0) || defined(STM32L4) +/** @defgroup HAL_COMP_Aliased_Functions HAL COMP Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_COMP_Start_IT HAL_COMP_Start /* Function considered as legacy as EXTI event or IT configuration is done into HAL_COMP_Init() */ +#define HAL_COMP_Stop_IT HAL_COMP_Stop /* Function considered as legacy as EXTI event or IT configuration is done into HAL_COMP_Init() */ +/** + * @} + */ +#endif + +/** @defgroup HAL_DAC_Aliased_Macros HAL DAC Aliased Macros maintained for legacy purpose + * @{ + */ + +#define IS_DAC_WAVE(WAVE) (((WAVE) == DAC_WAVE_NONE) || \ + ((WAVE) == DAC_WAVE_NOISE)|| \ + ((WAVE) == DAC_WAVE_TRIANGLE)) + +/** + * @} + */ + +/** @defgroup HAL_FLASH_Aliased_Macros HAL FLASH Aliased Macros maintained for legacy purpose + * @{ + */ + +#define IS_WRPAREA IS_OB_WRPAREA +#define IS_TYPEPROGRAM IS_FLASH_TYPEPROGRAM +#define IS_TYPEPROGRAMFLASH IS_FLASH_TYPEPROGRAM +#define IS_TYPEERASE IS_FLASH_TYPEERASE +#define IS_NBSECTORS IS_FLASH_NBSECTORS +#define IS_OB_WDG_SOURCE IS_OB_IWDG_SOURCE + +/** + * @} + */ + +/** @defgroup HAL_I2C_Aliased_Macros HAL I2C Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __HAL_I2C_RESET_CR2 I2C_RESET_CR2 +#define __HAL_I2C_GENERATE_START I2C_GENERATE_START +#define __HAL_I2C_FREQ_RANGE I2C_FREQ_RANGE +#define __HAL_I2C_RISE_TIME I2C_RISE_TIME +#define __HAL_I2C_SPEED_STANDARD I2C_SPEED_STANDARD +#define __HAL_I2C_SPEED_FAST I2C_SPEED_FAST +#define __HAL_I2C_SPEED I2C_SPEED +#define __HAL_I2C_7BIT_ADD_WRITE I2C_7BIT_ADD_WRITE +#define __HAL_I2C_7BIT_ADD_READ I2C_7BIT_ADD_READ +#define __HAL_I2C_10BIT_ADDRESS I2C_10BIT_ADDRESS +#define __HAL_I2C_10BIT_HEADER_WRITE I2C_10BIT_HEADER_WRITE +#define __HAL_I2C_10BIT_HEADER_READ I2C_10BIT_HEADER_READ +#define __HAL_I2C_MEM_ADD_MSB I2C_MEM_ADD_MSB +#define __HAL_I2C_MEM_ADD_LSB I2C_MEM_ADD_LSB +#define __HAL_I2C_FREQRANGE I2C_FREQRANGE +/** + * @} + */ + +/** @defgroup HAL_I2S_Aliased_Macros HAL I2S Aliased Macros maintained for legacy purpose + * @{ + */ + +#define IS_I2S_INSTANCE IS_I2S_ALL_INSTANCE +#define IS_I2S_INSTANCE_EXT IS_I2S_ALL_INSTANCE_EXT + +/** + * @} + */ + +/** @defgroup HAL_IRDA_Aliased_Macros HAL IRDA Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __IRDA_DISABLE __HAL_IRDA_DISABLE +#define __IRDA_ENABLE __HAL_IRDA_ENABLE + +#define __HAL_IRDA_GETCLOCKSOURCE IRDA_GETCLOCKSOURCE +#define __HAL_IRDA_MASK_COMPUTATION IRDA_MASK_COMPUTATION +#define __IRDA_GETCLOCKSOURCE IRDA_GETCLOCKSOURCE +#define __IRDA_MASK_COMPUTATION IRDA_MASK_COMPUTATION + +#define IS_IRDA_ONEBIT_SAMPLE IS_IRDA_ONE_BIT_SAMPLE + + +/** + * @} + */ + + +/** @defgroup HAL_IWDG_Aliased_Macros HAL IWDG Aliased Macros maintained for legacy purpose + * @{ + */ +#define __HAL_IWDG_ENABLE_WRITE_ACCESS IWDG_ENABLE_WRITE_ACCESS +#define __HAL_IWDG_DISABLE_WRITE_ACCESS IWDG_DISABLE_WRITE_ACCESS +/** + * @} + */ + + +/** @defgroup HAL_LPTIM_Aliased_Macros HAL LPTIM Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __HAL_LPTIM_ENABLE_INTERRUPT __HAL_LPTIM_ENABLE_IT +#define __HAL_LPTIM_DISABLE_INTERRUPT __HAL_LPTIM_DISABLE_IT +#define __HAL_LPTIM_GET_ITSTATUS __HAL_LPTIM_GET_IT_SOURCE + +/** + * @} + */ + + +/** @defgroup HAL_OPAMP_Aliased_Macros HAL OPAMP Aliased Macros maintained for legacy purpose + * @{ + */ +#define __OPAMP_CSR_OPAXPD OPAMP_CSR_OPAXPD +#define __OPAMP_CSR_S3SELX OPAMP_CSR_S3SELX +#define __OPAMP_CSR_S4SELX OPAMP_CSR_S4SELX +#define __OPAMP_CSR_S5SELX OPAMP_CSR_S5SELX +#define __OPAMP_CSR_S6SELX OPAMP_CSR_S6SELX +#define __OPAMP_CSR_OPAXCAL_L OPAMP_CSR_OPAXCAL_L +#define __OPAMP_CSR_OPAXCAL_H OPAMP_CSR_OPAXCAL_H +#define __OPAMP_CSR_OPAXLPM OPAMP_CSR_OPAXLPM +#define __OPAMP_CSR_ALL_SWITCHES OPAMP_CSR_ALL_SWITCHES +#define __OPAMP_CSR_ANAWSELX OPAMP_CSR_ANAWSELX +#define __OPAMP_CSR_OPAXCALOUT OPAMP_CSR_OPAXCALOUT +#define __OPAMP_OFFSET_TRIM_BITSPOSITION OPAMP_OFFSET_TRIM_BITSPOSITION +#define __OPAMP_OFFSET_TRIM_SET OPAMP_OFFSET_TRIM_SET + +/** + * @} + */ + + +/** @defgroup HAL_PWR_Aliased_Macros HAL PWR Aliased Macros maintained for legacy purpose + * @{ + */ +#define __HAL_PVD_EVENT_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_EVENT +#define __HAL_PVD_EVENT_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_EVENT +#define __HAL_PVD_EXTI_FALLINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE +#define __HAL_PVD_EXTI_FALLINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE +#define __HAL_PVD_EXTI_RISINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE +#define __HAL_PVD_EXTI_RISINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE +#define __HAL_PVM_EVENT_DISABLE __HAL_PWR_PVM_EVENT_DISABLE +#define __HAL_PVM_EVENT_ENABLE __HAL_PWR_PVM_EVENT_ENABLE +#define __HAL_PVM_EXTI_FALLINGTRIGGER_DISABLE __HAL_PWR_PVM_EXTI_FALLINGTRIGGER_DISABLE +#define __HAL_PVM_EXTI_FALLINGTRIGGER_ENABLE __HAL_PWR_PVM_EXTI_FALLINGTRIGGER_ENABLE +#define __HAL_PVM_EXTI_RISINGTRIGGER_DISABLE __HAL_PWR_PVM_EXTI_RISINGTRIGGER_DISABLE +#define __HAL_PVM_EXTI_RISINGTRIGGER_ENABLE __HAL_PWR_PVM_EXTI_RISINGTRIGGER_ENABLE +#define __HAL_PWR_INTERNALWAKEUP_DISABLE HAL_PWREx_DisableInternalWakeUpLine +#define __HAL_PWR_INTERNALWAKEUP_ENABLE HAL_PWREx_EnableInternalWakeUpLine +#define __HAL_PWR_PULL_UP_DOWN_CONFIG_DISABLE HAL_PWREx_DisablePullUpPullDownConfig +#define __HAL_PWR_PULL_UP_DOWN_CONFIG_ENABLE HAL_PWREx_EnablePullUpPullDownConfig +#define __HAL_PWR_PVD_EXTI_CLEAR_EGDE_TRIGGER() do { __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE(); } while(0) +#define __HAL_PWR_PVD_EXTI_EVENT_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_EVENT +#define __HAL_PWR_PVD_EXTI_EVENT_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_EVENT +#define __HAL_PWR_PVD_EXTI_FALLINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE +#define __HAL_PWR_PVD_EXTI_FALLINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE +#define __HAL_PWR_PVD_EXTI_RISINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE +#define __HAL_PWR_PVD_EXTI_RISINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE +#define __HAL_PWR_PVD_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE +#define __HAL_PWR_PVD_EXTI_SET_RISING_EDGE_TRIGGER __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE +#define __HAL_PWR_PVM_DISABLE() do { HAL_PWREx_DisablePVM1();HAL_PWREx_DisablePVM2();HAL_PWREx_DisablePVM3();HAL_PWREx_DisablePVM4(); } while(0) +#define __HAL_PWR_PVM_ENABLE() do { HAL_PWREx_EnablePVM1();HAL_PWREx_EnablePVM2();HAL_PWREx_EnablePVM3();HAL_PWREx_EnablePVM4(); } while(0) +#define __HAL_PWR_SRAM2CONTENT_PRESERVE_DISABLE HAL_PWREx_DisableSRAM2ContentRetention +#define __HAL_PWR_SRAM2CONTENT_PRESERVE_ENABLE HAL_PWREx_EnableSRAM2ContentRetention +#define __HAL_PWR_VDDIO2_DISABLE HAL_PWREx_DisableVddIO2 +#define __HAL_PWR_VDDIO2_ENABLE HAL_PWREx_EnableVddIO2 +#define __HAL_PWR_VDDIO2_EXTI_CLEAR_EGDE_TRIGGER __HAL_PWR_VDDIO2_EXTI_DISABLE_FALLING_EDGE +#define __HAL_PWR_VDDIO2_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_PWR_VDDIO2_EXTI_ENABLE_FALLING_EDGE +#define __HAL_PWR_VDDUSB_DISABLE HAL_PWREx_DisableVddUSB +#define __HAL_PWR_VDDUSB_ENABLE HAL_PWREx_EnableVddUSB + +#if defined (STM32F4) +#define __HAL_PVD_EXTI_ENABLE_IT(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_ENABLE_IT() +#define __HAL_PVD_EXTI_DISABLE_IT(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_DISABLE_IT() +#define __HAL_PVD_EXTI_GET_FLAG(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_GET_FLAG() +#define __HAL_PVD_EXTI_CLEAR_FLAG(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_CLEAR_FLAG() +#define __HAL_PVD_EXTI_GENERATE_SWIT(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_GENERATE_SWIT() +#else +#define __HAL_PVD_EXTI_CLEAR_FLAG __HAL_PWR_PVD_EXTI_CLEAR_FLAG +#define __HAL_PVD_EXTI_DISABLE_IT __HAL_PWR_PVD_EXTI_DISABLE_IT +#define __HAL_PVD_EXTI_ENABLE_IT __HAL_PWR_PVD_EXTI_ENABLE_IT +#define __HAL_PVD_EXTI_GENERATE_SWIT __HAL_PWR_PVD_EXTI_GENERATE_SWIT +#define __HAL_PVD_EXTI_GET_FLAG __HAL_PWR_PVD_EXTI_GET_FLAG +#endif /* STM32F4 */ +/** + * @} + */ + + +/** @defgroup HAL_RCC_Aliased HAL RCC Aliased maintained for legacy purpose + * @{ + */ + +#define RCC_StopWakeUpClock_MSI RCC_STOP_WAKEUPCLOCK_MSI +#define RCC_StopWakeUpClock_HSI RCC_STOP_WAKEUPCLOCK_HSI + +#define HAL_RCC_CCSCallback HAL_RCC_CSSCallback +#define HAL_RC48_EnableBuffer_Cmd(cmd) (((cmd)==ENABLE) ? HAL_RCCEx_EnableHSI48_VREFINT() : HAL_RCCEx_DisableHSI48_VREFINT()) + +#define __ADC_CLK_DISABLE __HAL_RCC_ADC_CLK_DISABLE +#define __ADC_CLK_ENABLE __HAL_RCC_ADC_CLK_ENABLE +#define __ADC_CLK_SLEEP_DISABLE __HAL_RCC_ADC_CLK_SLEEP_DISABLE +#define __ADC_CLK_SLEEP_ENABLE __HAL_RCC_ADC_CLK_SLEEP_ENABLE +#define __ADC_FORCE_RESET __HAL_RCC_ADC_FORCE_RESET +#define __ADC_RELEASE_RESET __HAL_RCC_ADC_RELEASE_RESET +#define __ADC1_CLK_DISABLE __HAL_RCC_ADC1_CLK_DISABLE +#define __ADC1_CLK_ENABLE __HAL_RCC_ADC1_CLK_ENABLE +#define __ADC1_FORCE_RESET __HAL_RCC_ADC1_FORCE_RESET +#define __ADC1_RELEASE_RESET __HAL_RCC_ADC1_RELEASE_RESET +#define __ADC1_CLK_SLEEP_ENABLE __HAL_RCC_ADC1_CLK_SLEEP_ENABLE +#define __ADC1_CLK_SLEEP_DISABLE __HAL_RCC_ADC1_CLK_SLEEP_DISABLE +#define __ADC2_CLK_DISABLE __HAL_RCC_ADC2_CLK_DISABLE +#define __ADC2_CLK_ENABLE __HAL_RCC_ADC2_CLK_ENABLE +#define __ADC2_FORCE_RESET __HAL_RCC_ADC2_FORCE_RESET +#define __ADC2_RELEASE_RESET __HAL_RCC_ADC2_RELEASE_RESET +#define __ADC3_CLK_DISABLE __HAL_RCC_ADC3_CLK_DISABLE +#define __ADC3_CLK_ENABLE __HAL_RCC_ADC3_CLK_ENABLE +#define __ADC3_FORCE_RESET __HAL_RCC_ADC3_FORCE_RESET +#define __ADC3_RELEASE_RESET __HAL_RCC_ADC3_RELEASE_RESET +#define __AES_CLK_DISABLE __HAL_RCC_AES_CLK_DISABLE +#define __AES_CLK_ENABLE __HAL_RCC_AES_CLK_ENABLE +#define __AES_CLK_SLEEP_DISABLE __HAL_RCC_AES_CLK_SLEEP_DISABLE +#define __AES_CLK_SLEEP_ENABLE __HAL_RCC_AES_CLK_SLEEP_ENABLE +#define __AES_FORCE_RESET __HAL_RCC_AES_FORCE_RESET +#define __AES_RELEASE_RESET __HAL_RCC_AES_RELEASE_RESET +#define __CRYP_CLK_SLEEP_ENABLE __HAL_RCC_CRYP_CLK_SLEEP_ENABLE +#define __CRYP_CLK_SLEEP_DISABLE __HAL_RCC_CRYP_CLK_SLEEP_DISABLE +#define __CRYP_CLK_ENABLE __HAL_RCC_CRYP_CLK_ENABLE +#define __CRYP_CLK_DISABLE __HAL_RCC_CRYP_CLK_DISABLE +#define __CRYP_FORCE_RESET __HAL_RCC_CRYP_FORCE_RESET +#define __CRYP_RELEASE_RESET __HAL_RCC_CRYP_RELEASE_RESET +#define __AFIO_CLK_DISABLE __HAL_RCC_AFIO_CLK_DISABLE +#define __AFIO_CLK_ENABLE __HAL_RCC_AFIO_CLK_ENABLE +#define __AFIO_FORCE_RESET __HAL_RCC_AFIO_FORCE_RESET +#define __AFIO_RELEASE_RESET __HAL_RCC_AFIO_RELEASE_RESET +#define __AHB_FORCE_RESET __HAL_RCC_AHB_FORCE_RESET +#define __AHB_RELEASE_RESET __HAL_RCC_AHB_RELEASE_RESET +#define __AHB1_FORCE_RESET __HAL_RCC_AHB1_FORCE_RESET +#define __AHB1_RELEASE_RESET __HAL_RCC_AHB1_RELEASE_RESET +#define __AHB2_FORCE_RESET __HAL_RCC_AHB2_FORCE_RESET +#define __AHB2_RELEASE_RESET __HAL_RCC_AHB2_RELEASE_RESET +#define __AHB3_FORCE_RESET __HAL_RCC_AHB3_FORCE_RESET +#define __AHB3_RELEASE_RESET __HAL_RCC_AHB3_RELEASE_RESET +#define __APB1_FORCE_RESET __HAL_RCC_APB1_FORCE_RESET +#define __APB1_RELEASE_RESET __HAL_RCC_APB1_RELEASE_RESET +#define __APB2_FORCE_RESET __HAL_RCC_APB2_FORCE_RESET +#define __APB2_RELEASE_RESET __HAL_RCC_APB2_RELEASE_RESET +#define __BKP_CLK_DISABLE __HAL_RCC_BKP_CLK_DISABLE +#define __BKP_CLK_ENABLE __HAL_RCC_BKP_CLK_ENABLE +#define __BKP_FORCE_RESET __HAL_RCC_BKP_FORCE_RESET +#define __BKP_RELEASE_RESET __HAL_RCC_BKP_RELEASE_RESET +#define __CAN1_CLK_DISABLE __HAL_RCC_CAN1_CLK_DISABLE +#define __CAN1_CLK_ENABLE __HAL_RCC_CAN1_CLK_ENABLE +#define __CAN1_CLK_SLEEP_DISABLE __HAL_RCC_CAN1_CLK_SLEEP_DISABLE +#define __CAN1_CLK_SLEEP_ENABLE __HAL_RCC_CAN1_CLK_SLEEP_ENABLE +#define __CAN1_FORCE_RESET __HAL_RCC_CAN1_FORCE_RESET +#define __CAN1_RELEASE_RESET __HAL_RCC_CAN1_RELEASE_RESET +#define __CAN_CLK_DISABLE __HAL_RCC_CAN1_CLK_DISABLE +#define __CAN_CLK_ENABLE __HAL_RCC_CAN1_CLK_ENABLE +#define __CAN_FORCE_RESET __HAL_RCC_CAN1_FORCE_RESET +#define __CAN_RELEASE_RESET __HAL_RCC_CAN1_RELEASE_RESET +#define __CAN2_CLK_DISABLE __HAL_RCC_CAN2_CLK_DISABLE +#define __CAN2_CLK_ENABLE __HAL_RCC_CAN2_CLK_ENABLE +#define __CAN2_FORCE_RESET __HAL_RCC_CAN2_FORCE_RESET +#define __CAN2_RELEASE_RESET __HAL_RCC_CAN2_RELEASE_RESET +#define __CEC_CLK_DISABLE __HAL_RCC_CEC_CLK_DISABLE +#define __CEC_CLK_ENABLE __HAL_RCC_CEC_CLK_ENABLE +#define __COMP_CLK_DISABLE __HAL_RCC_COMP_CLK_DISABLE +#define __COMP_CLK_ENABLE __HAL_RCC_COMP_CLK_ENABLE +#define __COMP_FORCE_RESET __HAL_RCC_COMP_FORCE_RESET +#define __COMP_RELEASE_RESET __HAL_RCC_COMP_RELEASE_RESET +#define __COMP_CLK_SLEEP_ENABLE __HAL_RCC_COMP_CLK_SLEEP_ENABLE +#define __COMP_CLK_SLEEP_DISABLE __HAL_RCC_COMP_CLK_SLEEP_DISABLE +#define __CEC_FORCE_RESET __HAL_RCC_CEC_FORCE_RESET +#define __CEC_RELEASE_RESET __HAL_RCC_CEC_RELEASE_RESET +#define __CRC_CLK_DISABLE __HAL_RCC_CRC_CLK_DISABLE +#define __CRC_CLK_ENABLE __HAL_RCC_CRC_CLK_ENABLE +#define __CRC_CLK_SLEEP_DISABLE __HAL_RCC_CRC_CLK_SLEEP_DISABLE +#define __CRC_CLK_SLEEP_ENABLE __HAL_RCC_CRC_CLK_SLEEP_ENABLE +#define __CRC_FORCE_RESET __HAL_RCC_CRC_FORCE_RESET +#define __CRC_RELEASE_RESET __HAL_RCC_CRC_RELEASE_RESET +#define __DAC_CLK_DISABLE __HAL_RCC_DAC_CLK_DISABLE +#define __DAC_CLK_ENABLE __HAL_RCC_DAC_CLK_ENABLE +#define __DAC_FORCE_RESET __HAL_RCC_DAC_FORCE_RESET +#define __DAC_RELEASE_RESET __HAL_RCC_DAC_RELEASE_RESET +#define __DAC1_CLK_DISABLE __HAL_RCC_DAC1_CLK_DISABLE +#define __DAC1_CLK_ENABLE __HAL_RCC_DAC1_CLK_ENABLE +#define __DAC1_CLK_SLEEP_DISABLE __HAL_RCC_DAC1_CLK_SLEEP_DISABLE +#define __DAC1_CLK_SLEEP_ENABLE __HAL_RCC_DAC1_CLK_SLEEP_ENABLE +#define __DAC1_FORCE_RESET __HAL_RCC_DAC1_FORCE_RESET +#define __DAC1_RELEASE_RESET __HAL_RCC_DAC1_RELEASE_RESET +#define __DBGMCU_CLK_ENABLE __HAL_RCC_DBGMCU_CLK_ENABLE +#define __DBGMCU_CLK_DISABLE __HAL_RCC_DBGMCU_CLK_DISABLE +#define __DBGMCU_FORCE_RESET __HAL_RCC_DBGMCU_FORCE_RESET +#define __DBGMCU_RELEASE_RESET __HAL_RCC_DBGMCU_RELEASE_RESET +#define __DFSDM_CLK_DISABLE __HAL_RCC_DFSDM_CLK_DISABLE +#define __DFSDM_CLK_ENABLE __HAL_RCC_DFSDM_CLK_ENABLE +#define __DFSDM_CLK_SLEEP_DISABLE __HAL_RCC_DFSDM_CLK_SLEEP_DISABLE +#define __DFSDM_CLK_SLEEP_ENABLE __HAL_RCC_DFSDM_CLK_SLEEP_ENABLE +#define __DFSDM_FORCE_RESET __HAL_RCC_DFSDM_FORCE_RESET +#define __DFSDM_RELEASE_RESET __HAL_RCC_DFSDM_RELEASE_RESET +#define __DMA1_CLK_DISABLE __HAL_RCC_DMA1_CLK_DISABLE +#define __DMA1_CLK_ENABLE __HAL_RCC_DMA1_CLK_ENABLE +#define __DMA1_CLK_SLEEP_DISABLE __HAL_RCC_DMA1_CLK_SLEEP_DISABLE +#define __DMA1_CLK_SLEEP_ENABLE __HAL_RCC_DMA1_CLK_SLEEP_ENABLE +#define __DMA1_FORCE_RESET __HAL_RCC_DMA1_FORCE_RESET +#define __DMA1_RELEASE_RESET __HAL_RCC_DMA1_RELEASE_RESET +#define __DMA2_CLK_DISABLE __HAL_RCC_DMA2_CLK_DISABLE +#define __DMA2_CLK_ENABLE __HAL_RCC_DMA2_CLK_ENABLE +#define __DMA2_CLK_SLEEP_DISABLE __HAL_RCC_DMA2_CLK_SLEEP_DISABLE +#define __DMA2_CLK_SLEEP_ENABLE __HAL_RCC_DMA2_CLK_SLEEP_ENABLE +#define __DMA2_FORCE_RESET __HAL_RCC_DMA2_FORCE_RESET +#define __DMA2_RELEASE_RESET __HAL_RCC_DMA2_RELEASE_RESET +#define __ETHMAC_CLK_DISABLE __HAL_RCC_ETHMAC_CLK_DISABLE +#define __ETHMAC_CLK_ENABLE __HAL_RCC_ETHMAC_CLK_ENABLE +#define __ETHMAC_FORCE_RESET __HAL_RCC_ETHMAC_FORCE_RESET +#define __ETHMAC_RELEASE_RESET __HAL_RCC_ETHMAC_RELEASE_RESET +#define __ETHMACRX_CLK_DISABLE __HAL_RCC_ETHMACRX_CLK_DISABLE +#define __ETHMACRX_CLK_ENABLE __HAL_RCC_ETHMACRX_CLK_ENABLE +#define __ETHMACTX_CLK_DISABLE __HAL_RCC_ETHMACTX_CLK_DISABLE +#define __ETHMACTX_CLK_ENABLE __HAL_RCC_ETHMACTX_CLK_ENABLE +#define __FIREWALL_CLK_DISABLE __HAL_RCC_FIREWALL_CLK_DISABLE +#define __FIREWALL_CLK_ENABLE __HAL_RCC_FIREWALL_CLK_ENABLE +#define __FLASH_CLK_DISABLE __HAL_RCC_FLASH_CLK_DISABLE +#define __FLASH_CLK_ENABLE __HAL_RCC_FLASH_CLK_ENABLE +#define __FLASH_CLK_SLEEP_DISABLE __HAL_RCC_FLASH_CLK_SLEEP_DISABLE +#define __FLASH_CLK_SLEEP_ENABLE __HAL_RCC_FLASH_CLK_SLEEP_ENABLE +#define __FLASH_FORCE_RESET __HAL_RCC_FLASH_FORCE_RESET +#define __FLASH_RELEASE_RESET __HAL_RCC_FLASH_RELEASE_RESET +#define __FLITF_CLK_DISABLE __HAL_RCC_FLITF_CLK_DISABLE +#define __FLITF_CLK_ENABLE __HAL_RCC_FLITF_CLK_ENABLE +#define __FLITF_FORCE_RESET __HAL_RCC_FLITF_FORCE_RESET +#define __FLITF_RELEASE_RESET __HAL_RCC_FLITF_RELEASE_RESET +#define __FLITF_CLK_SLEEP_ENABLE __HAL_RCC_FLITF_CLK_SLEEP_ENABLE +#define __FLITF_CLK_SLEEP_DISABLE __HAL_RCC_FLITF_CLK_SLEEP_DISABLE +#define __FMC_CLK_DISABLE __HAL_RCC_FMC_CLK_DISABLE +#define __FMC_CLK_ENABLE __HAL_RCC_FMC_CLK_ENABLE +#define __FMC_CLK_SLEEP_DISABLE __HAL_RCC_FMC_CLK_SLEEP_DISABLE +#define __FMC_CLK_SLEEP_ENABLE __HAL_RCC_FMC_CLK_SLEEP_ENABLE +#define __FMC_FORCE_RESET __HAL_RCC_FMC_FORCE_RESET +#define __FMC_RELEASE_RESET __HAL_RCC_FMC_RELEASE_RESET +#define __FSMC_CLK_DISABLE __HAL_RCC_FSMC_CLK_DISABLE +#define __FSMC_CLK_ENABLE __HAL_RCC_FSMC_CLK_ENABLE +#define __GPIOA_CLK_DISABLE __HAL_RCC_GPIOA_CLK_DISABLE +#define __GPIOA_CLK_ENABLE __HAL_RCC_GPIOA_CLK_ENABLE +#define __GPIOA_CLK_SLEEP_DISABLE __HAL_RCC_GPIOA_CLK_SLEEP_DISABLE +#define __GPIOA_CLK_SLEEP_ENABLE __HAL_RCC_GPIOA_CLK_SLEEP_ENABLE +#define __GPIOA_FORCE_RESET __HAL_RCC_GPIOA_FORCE_RESET +#define __GPIOA_RELEASE_RESET __HAL_RCC_GPIOA_RELEASE_RESET +#define __GPIOB_CLK_DISABLE __HAL_RCC_GPIOB_CLK_DISABLE +#define __GPIOB_CLK_ENABLE __HAL_RCC_GPIOB_CLK_ENABLE +#define __GPIOB_CLK_SLEEP_DISABLE __HAL_RCC_GPIOB_CLK_SLEEP_DISABLE +#define __GPIOB_CLK_SLEEP_ENABLE __HAL_RCC_GPIOB_CLK_SLEEP_ENABLE +#define __GPIOB_FORCE_RESET __HAL_RCC_GPIOB_FORCE_RESET +#define __GPIOB_RELEASE_RESET __HAL_RCC_GPIOB_RELEASE_RESET +#define __GPIOC_CLK_DISABLE __HAL_RCC_GPIOC_CLK_DISABLE +#define __GPIOC_CLK_ENABLE __HAL_RCC_GPIOC_CLK_ENABLE +#define __GPIOC_CLK_SLEEP_DISABLE __HAL_RCC_GPIOC_CLK_SLEEP_DISABLE +#define __GPIOC_CLK_SLEEP_ENABLE __HAL_RCC_GPIOC_CLK_SLEEP_ENABLE +#define __GPIOC_FORCE_RESET __HAL_RCC_GPIOC_FORCE_RESET +#define __GPIOC_RELEASE_RESET __HAL_RCC_GPIOC_RELEASE_RESET +#define __GPIOD_CLK_DISABLE __HAL_RCC_GPIOD_CLK_DISABLE +#define __GPIOD_CLK_ENABLE __HAL_RCC_GPIOD_CLK_ENABLE +#define __GPIOD_CLK_SLEEP_DISABLE __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE +#define __GPIOD_CLK_SLEEP_ENABLE __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE +#define __GPIOD_FORCE_RESET __HAL_RCC_GPIOD_FORCE_RESET +#define __GPIOD_RELEASE_RESET __HAL_RCC_GPIOD_RELEASE_RESET +#define __GPIOE_CLK_DISABLE __HAL_RCC_GPIOE_CLK_DISABLE +#define __GPIOE_CLK_ENABLE __HAL_RCC_GPIOE_CLK_ENABLE +#define __GPIOE_CLK_SLEEP_DISABLE __HAL_RCC_GPIOE_CLK_SLEEP_DISABLE +#define __GPIOE_CLK_SLEEP_ENABLE __HAL_RCC_GPIOE_CLK_SLEEP_ENABLE +#define __GPIOE_FORCE_RESET __HAL_RCC_GPIOE_FORCE_RESET +#define __GPIOE_RELEASE_RESET __HAL_RCC_GPIOE_RELEASE_RESET +#define __GPIOF_CLK_DISABLE __HAL_RCC_GPIOF_CLK_DISABLE +#define __GPIOF_CLK_ENABLE __HAL_RCC_GPIOF_CLK_ENABLE +#define __GPIOF_CLK_SLEEP_DISABLE __HAL_RCC_GPIOF_CLK_SLEEP_DISABLE +#define __GPIOF_CLK_SLEEP_ENABLE __HAL_RCC_GPIOF_CLK_SLEEP_ENABLE +#define __GPIOF_FORCE_RESET __HAL_RCC_GPIOF_FORCE_RESET +#define __GPIOF_RELEASE_RESET __HAL_RCC_GPIOF_RELEASE_RESET +#define __GPIOG_CLK_DISABLE __HAL_RCC_GPIOG_CLK_DISABLE +#define __GPIOG_CLK_ENABLE __HAL_RCC_GPIOG_CLK_ENABLE +#define __GPIOG_CLK_SLEEP_DISABLE __HAL_RCC_GPIOG_CLK_SLEEP_DISABLE +#define __GPIOG_CLK_SLEEP_ENABLE __HAL_RCC_GPIOG_CLK_SLEEP_ENABLE +#define __GPIOG_FORCE_RESET __HAL_RCC_GPIOG_FORCE_RESET +#define __GPIOG_RELEASE_RESET __HAL_RCC_GPIOG_RELEASE_RESET +#define __GPIOH_CLK_DISABLE __HAL_RCC_GPIOH_CLK_DISABLE +#define __GPIOH_CLK_ENABLE __HAL_RCC_GPIOH_CLK_ENABLE +#define __GPIOH_CLK_SLEEP_DISABLE __HAL_RCC_GPIOH_CLK_SLEEP_DISABLE +#define __GPIOH_CLK_SLEEP_ENABLE __HAL_RCC_GPIOH_CLK_SLEEP_ENABLE +#define __GPIOH_FORCE_RESET __HAL_RCC_GPIOH_FORCE_RESET +#define __GPIOH_RELEASE_RESET __HAL_RCC_GPIOH_RELEASE_RESET +#define __I2C1_CLK_DISABLE __HAL_RCC_I2C1_CLK_DISABLE +#define __I2C1_CLK_ENABLE __HAL_RCC_I2C1_CLK_ENABLE +#define __I2C1_CLK_SLEEP_DISABLE __HAL_RCC_I2C1_CLK_SLEEP_DISABLE +#define __I2C1_CLK_SLEEP_ENABLE __HAL_RCC_I2C1_CLK_SLEEP_ENABLE +#define __I2C1_FORCE_RESET __HAL_RCC_I2C1_FORCE_RESET +#define __I2C1_RELEASE_RESET __HAL_RCC_I2C1_RELEASE_RESET +#define __I2C2_CLK_DISABLE __HAL_RCC_I2C2_CLK_DISABLE +#define __I2C2_CLK_ENABLE __HAL_RCC_I2C2_CLK_ENABLE +#define __I2C2_CLK_SLEEP_DISABLE __HAL_RCC_I2C2_CLK_SLEEP_DISABLE +#define __I2C2_CLK_SLEEP_ENABLE __HAL_RCC_I2C2_CLK_SLEEP_ENABLE +#define __I2C2_FORCE_RESET __HAL_RCC_I2C2_FORCE_RESET +#define __I2C2_RELEASE_RESET __HAL_RCC_I2C2_RELEASE_RESET +#define __I2C3_CLK_DISABLE __HAL_RCC_I2C3_CLK_DISABLE +#define __I2C3_CLK_ENABLE __HAL_RCC_I2C3_CLK_ENABLE +#define __I2C3_CLK_SLEEP_DISABLE __HAL_RCC_I2C3_CLK_SLEEP_DISABLE +#define __I2C3_CLK_SLEEP_ENABLE __HAL_RCC_I2C3_CLK_SLEEP_ENABLE +#define __I2C3_FORCE_RESET __HAL_RCC_I2C3_FORCE_RESET +#define __I2C3_RELEASE_RESET __HAL_RCC_I2C3_RELEASE_RESET +#define __LCD_CLK_DISABLE __HAL_RCC_LCD_CLK_DISABLE +#define __LCD_CLK_ENABLE __HAL_RCC_LCD_CLK_ENABLE +#define __LCD_CLK_SLEEP_DISABLE __HAL_RCC_LCD_CLK_SLEEP_DISABLE +#define __LCD_CLK_SLEEP_ENABLE __HAL_RCC_LCD_CLK_SLEEP_ENABLE +#define __LCD_FORCE_RESET __HAL_RCC_LCD_FORCE_RESET +#define __LCD_RELEASE_RESET __HAL_RCC_LCD_RELEASE_RESET +#define __LPTIM1_CLK_DISABLE __HAL_RCC_LPTIM1_CLK_DISABLE +#define __LPTIM1_CLK_ENABLE __HAL_RCC_LPTIM1_CLK_ENABLE +#define __LPTIM1_CLK_SLEEP_DISABLE __HAL_RCC_LPTIM1_CLK_SLEEP_DISABLE +#define __LPTIM1_CLK_SLEEP_ENABLE __HAL_RCC_LPTIM1_CLK_SLEEP_ENABLE +#define __LPTIM1_FORCE_RESET __HAL_RCC_LPTIM1_FORCE_RESET +#define __LPTIM1_RELEASE_RESET __HAL_RCC_LPTIM1_RELEASE_RESET +#define __LPTIM2_CLK_DISABLE __HAL_RCC_LPTIM2_CLK_DISABLE +#define __LPTIM2_CLK_ENABLE __HAL_RCC_LPTIM2_CLK_ENABLE +#define __LPTIM2_CLK_SLEEP_DISABLE __HAL_RCC_LPTIM2_CLK_SLEEP_DISABLE +#define __LPTIM2_CLK_SLEEP_ENABLE __HAL_RCC_LPTIM2_CLK_SLEEP_ENABLE +#define __LPTIM2_FORCE_RESET __HAL_RCC_LPTIM2_FORCE_RESET +#define __LPTIM2_RELEASE_RESET __HAL_RCC_LPTIM2_RELEASE_RESET +#define __LPUART1_CLK_DISABLE __HAL_RCC_LPUART1_CLK_DISABLE +#define __LPUART1_CLK_ENABLE __HAL_RCC_LPUART1_CLK_ENABLE +#define __LPUART1_CLK_SLEEP_DISABLE __HAL_RCC_LPUART1_CLK_SLEEP_DISABLE +#define __LPUART1_CLK_SLEEP_ENABLE __HAL_RCC_LPUART1_CLK_SLEEP_ENABLE +#define __LPUART1_FORCE_RESET __HAL_RCC_LPUART1_FORCE_RESET +#define __LPUART1_RELEASE_RESET __HAL_RCC_LPUART1_RELEASE_RESET +#define __OPAMP_CLK_DISABLE __HAL_RCC_OPAMP_CLK_DISABLE +#define __OPAMP_CLK_ENABLE __HAL_RCC_OPAMP_CLK_ENABLE +#define __OPAMP_CLK_SLEEP_DISABLE __HAL_RCC_OPAMP_CLK_SLEEP_DISABLE +#define __OPAMP_CLK_SLEEP_ENABLE __HAL_RCC_OPAMP_CLK_SLEEP_ENABLE +#define __OPAMP_FORCE_RESET __HAL_RCC_OPAMP_FORCE_RESET +#define __OPAMP_RELEASE_RESET __HAL_RCC_OPAMP_RELEASE_RESET +#define __OTGFS_CLK_DISABLE __HAL_RCC_OTGFS_CLK_DISABLE +#define __OTGFS_CLK_ENABLE __HAL_RCC_OTGFS_CLK_ENABLE +#define __OTGFS_CLK_SLEEP_DISABLE __HAL_RCC_OTGFS_CLK_SLEEP_DISABLE +#define __OTGFS_CLK_SLEEP_ENABLE __HAL_RCC_OTGFS_CLK_SLEEP_ENABLE +#define __OTGFS_FORCE_RESET __HAL_RCC_OTGFS_FORCE_RESET +#define __OTGFS_RELEASE_RESET __HAL_RCC_OTGFS_RELEASE_RESET +#define __PWR_CLK_DISABLE __HAL_RCC_PWR_CLK_DISABLE +#define __PWR_CLK_ENABLE __HAL_RCC_PWR_CLK_ENABLE +#define __PWR_CLK_SLEEP_DISABLE __HAL_RCC_PWR_CLK_SLEEP_DISABLE +#define __PWR_CLK_SLEEP_ENABLE __HAL_RCC_PWR_CLK_SLEEP_ENABLE +#define __PWR_FORCE_RESET __HAL_RCC_PWR_FORCE_RESET +#define __PWR_RELEASE_RESET __HAL_RCC_PWR_RELEASE_RESET +#define __QSPI_CLK_DISABLE __HAL_RCC_QSPI_CLK_DISABLE +#define __QSPI_CLK_ENABLE __HAL_RCC_QSPI_CLK_ENABLE +#define __QSPI_CLK_SLEEP_DISABLE __HAL_RCC_QSPI_CLK_SLEEP_DISABLE +#define __QSPI_CLK_SLEEP_ENABLE __HAL_RCC_QSPI_CLK_SLEEP_ENABLE +#define __QSPI_FORCE_RESET __HAL_RCC_QSPI_FORCE_RESET +#define __QSPI_RELEASE_RESET __HAL_RCC_QSPI_RELEASE_RESET +#define __RNG_CLK_DISABLE __HAL_RCC_RNG_CLK_DISABLE +#define __RNG_CLK_ENABLE __HAL_RCC_RNG_CLK_ENABLE +#define __RNG_CLK_SLEEP_DISABLE __HAL_RCC_RNG_CLK_SLEEP_DISABLE +#define __RNG_CLK_SLEEP_ENABLE __HAL_RCC_RNG_CLK_SLEEP_ENABLE +#define __RNG_FORCE_RESET __HAL_RCC_RNG_FORCE_RESET +#define __RNG_RELEASE_RESET __HAL_RCC_RNG_RELEASE_RESET +#define __SAI1_CLK_DISABLE __HAL_RCC_SAI1_CLK_DISABLE +#define __SAI1_CLK_ENABLE __HAL_RCC_SAI1_CLK_ENABLE +#define __SAI1_CLK_SLEEP_DISABLE __HAL_RCC_SAI1_CLK_SLEEP_DISABLE +#define __SAI1_CLK_SLEEP_ENABLE __HAL_RCC_SAI1_CLK_SLEEP_ENABLE +#define __SAI1_FORCE_RESET __HAL_RCC_SAI1_FORCE_RESET +#define __SAI1_RELEASE_RESET __HAL_RCC_SAI1_RELEASE_RESET +#define __SAI2_CLK_DISABLE __HAL_RCC_SAI2_CLK_DISABLE +#define __SAI2_CLK_ENABLE __HAL_RCC_SAI2_CLK_ENABLE +#define __SAI2_CLK_SLEEP_DISABLE __HAL_RCC_SAI2_CLK_SLEEP_DISABLE +#define __SAI2_CLK_SLEEP_ENABLE __HAL_RCC_SAI2_CLK_SLEEP_ENABLE +#define __SAI2_FORCE_RESET __HAL_RCC_SAI2_FORCE_RESET +#define __SAI2_RELEASE_RESET __HAL_RCC_SAI2_RELEASE_RESET +#define __SDIO_CLK_DISABLE __HAL_RCC_SDIO_CLK_DISABLE +#define __SDIO_CLK_ENABLE __HAL_RCC_SDIO_CLK_ENABLE +#define __SDMMC_CLK_DISABLE __HAL_RCC_SDMMC_CLK_DISABLE +#define __SDMMC_CLK_ENABLE __HAL_RCC_SDMMC_CLK_ENABLE +#define __SDMMC_CLK_SLEEP_DISABLE __HAL_RCC_SDMMC_CLK_SLEEP_DISABLE +#define __SDMMC_CLK_SLEEP_ENABLE __HAL_RCC_SDMMC_CLK_SLEEP_ENABLE +#define __SDMMC_FORCE_RESET __HAL_RCC_SDMMC_FORCE_RESET +#define __SDMMC_RELEASE_RESET __HAL_RCC_SDMMC_RELEASE_RESET +#define __SPI1_CLK_DISABLE __HAL_RCC_SPI1_CLK_DISABLE +#define __SPI1_CLK_ENABLE __HAL_RCC_SPI1_CLK_ENABLE +#define __SPI1_CLK_SLEEP_DISABLE __HAL_RCC_SPI1_CLK_SLEEP_DISABLE +#define __SPI1_CLK_SLEEP_ENABLE __HAL_RCC_SPI1_CLK_SLEEP_ENABLE +#define __SPI1_FORCE_RESET __HAL_RCC_SPI1_FORCE_RESET +#define __SPI1_RELEASE_RESET __HAL_RCC_SPI1_RELEASE_RESET +#define __SPI2_CLK_DISABLE __HAL_RCC_SPI2_CLK_DISABLE +#define __SPI2_CLK_ENABLE __HAL_RCC_SPI2_CLK_ENABLE +#define __SPI2_CLK_SLEEP_DISABLE __HAL_RCC_SPI2_CLK_SLEEP_DISABLE +#define __SPI2_CLK_SLEEP_ENABLE __HAL_RCC_SPI2_CLK_SLEEP_ENABLE +#define __SPI2_FORCE_RESET __HAL_RCC_SPI2_FORCE_RESET +#define __SPI2_RELEASE_RESET __HAL_RCC_SPI2_RELEASE_RESET +#define __SPI3_CLK_DISABLE __HAL_RCC_SPI3_CLK_DISABLE +#define __SPI3_CLK_ENABLE __HAL_RCC_SPI3_CLK_ENABLE +#define __SPI3_CLK_SLEEP_DISABLE __HAL_RCC_SPI3_CLK_SLEEP_DISABLE +#define __SPI3_CLK_SLEEP_ENABLE __HAL_RCC_SPI3_CLK_SLEEP_ENABLE +#define __SPI3_FORCE_RESET __HAL_RCC_SPI3_FORCE_RESET +#define __SPI3_RELEASE_RESET __HAL_RCC_SPI3_RELEASE_RESET +#define __SRAM_CLK_DISABLE __HAL_RCC_SRAM_CLK_DISABLE +#define __SRAM_CLK_ENABLE __HAL_RCC_SRAM_CLK_ENABLE +#define __SRAM1_CLK_SLEEP_DISABLE __HAL_RCC_SRAM1_CLK_SLEEP_DISABLE +#define __SRAM1_CLK_SLEEP_ENABLE __HAL_RCC_SRAM1_CLK_SLEEP_ENABLE +#define __SRAM2_CLK_SLEEP_DISABLE __HAL_RCC_SRAM2_CLK_SLEEP_DISABLE +#define __SRAM2_CLK_SLEEP_ENABLE __HAL_RCC_SRAM2_CLK_SLEEP_ENABLE +#define __SWPMI1_CLK_DISABLE __HAL_RCC_SWPMI1_CLK_DISABLE +#define __SWPMI1_CLK_ENABLE __HAL_RCC_SWPMI1_CLK_ENABLE +#define __SWPMI1_CLK_SLEEP_DISABLE __HAL_RCC_SWPMI1_CLK_SLEEP_DISABLE +#define __SWPMI1_CLK_SLEEP_ENABLE __HAL_RCC_SWPMI1_CLK_SLEEP_ENABLE +#define __SWPMI1_FORCE_RESET __HAL_RCC_SWPMI1_FORCE_RESET +#define __SWPMI1_RELEASE_RESET __HAL_RCC_SWPMI1_RELEASE_RESET +#define __SYSCFG_CLK_DISABLE __HAL_RCC_SYSCFG_CLK_DISABLE +#define __SYSCFG_CLK_ENABLE __HAL_RCC_SYSCFG_CLK_ENABLE +#define __SYSCFG_CLK_SLEEP_DISABLE __HAL_RCC_SYSCFG_CLK_SLEEP_DISABLE +#define __SYSCFG_CLK_SLEEP_ENABLE __HAL_RCC_SYSCFG_CLK_SLEEP_ENABLE +#define __SYSCFG_FORCE_RESET __HAL_RCC_SYSCFG_FORCE_RESET +#define __SYSCFG_RELEASE_RESET __HAL_RCC_SYSCFG_RELEASE_RESET +#define __TIM1_CLK_DISABLE __HAL_RCC_TIM1_CLK_DISABLE +#define __TIM1_CLK_ENABLE __HAL_RCC_TIM1_CLK_ENABLE +#define __TIM1_CLK_SLEEP_DISABLE __HAL_RCC_TIM1_CLK_SLEEP_DISABLE +#define __TIM1_CLK_SLEEP_ENABLE __HAL_RCC_TIM1_CLK_SLEEP_ENABLE +#define __TIM1_FORCE_RESET __HAL_RCC_TIM1_FORCE_RESET +#define __TIM1_RELEASE_RESET __HAL_RCC_TIM1_RELEASE_RESET +#define __TIM10_CLK_DISABLE __HAL_RCC_TIM10_CLK_DISABLE +#define __TIM10_CLK_ENABLE __HAL_RCC_TIM10_CLK_ENABLE +#define __TIM10_FORCE_RESET __HAL_RCC_TIM10_FORCE_RESET +#define __TIM10_RELEASE_RESET __HAL_RCC_TIM10_RELEASE_RESET +#define __TIM11_CLK_DISABLE __HAL_RCC_TIM11_CLK_DISABLE +#define __TIM11_CLK_ENABLE __HAL_RCC_TIM11_CLK_ENABLE +#define __TIM11_FORCE_RESET __HAL_RCC_TIM11_FORCE_RESET +#define __TIM11_RELEASE_RESET __HAL_RCC_TIM11_RELEASE_RESET +#define __TIM12_CLK_DISABLE __HAL_RCC_TIM12_CLK_DISABLE +#define __TIM12_CLK_ENABLE __HAL_RCC_TIM12_CLK_ENABLE +#define __TIM12_FORCE_RESET __HAL_RCC_TIM12_FORCE_RESET +#define __TIM12_RELEASE_RESET __HAL_RCC_TIM12_RELEASE_RESET +#define __TIM13_CLK_DISABLE __HAL_RCC_TIM13_CLK_DISABLE +#define __TIM13_CLK_ENABLE __HAL_RCC_TIM13_CLK_ENABLE +#define __TIM13_FORCE_RESET __HAL_RCC_TIM13_FORCE_RESET +#define __TIM13_RELEASE_RESET __HAL_RCC_TIM13_RELEASE_RESET +#define __TIM14_CLK_DISABLE __HAL_RCC_TIM14_CLK_DISABLE +#define __TIM14_CLK_ENABLE __HAL_RCC_TIM14_CLK_ENABLE +#define __TIM14_FORCE_RESET __HAL_RCC_TIM14_FORCE_RESET +#define __TIM14_RELEASE_RESET __HAL_RCC_TIM14_RELEASE_RESET +#define __TIM15_CLK_DISABLE __HAL_RCC_TIM15_CLK_DISABLE +#define __TIM15_CLK_ENABLE __HAL_RCC_TIM15_CLK_ENABLE +#define __TIM15_CLK_SLEEP_DISABLE __HAL_RCC_TIM15_CLK_SLEEP_DISABLE +#define __TIM15_CLK_SLEEP_ENABLE __HAL_RCC_TIM15_CLK_SLEEP_ENABLE +#define __TIM15_FORCE_RESET __HAL_RCC_TIM15_FORCE_RESET +#define __TIM15_RELEASE_RESET __HAL_RCC_TIM15_RELEASE_RESET +#define __TIM16_CLK_DISABLE __HAL_RCC_TIM16_CLK_DISABLE +#define __TIM16_CLK_ENABLE __HAL_RCC_TIM16_CLK_ENABLE +#define __TIM16_CLK_SLEEP_DISABLE __HAL_RCC_TIM16_CLK_SLEEP_DISABLE +#define __TIM16_CLK_SLEEP_ENABLE __HAL_RCC_TIM16_CLK_SLEEP_ENABLE +#define __TIM16_FORCE_RESET __HAL_RCC_TIM16_FORCE_RESET +#define __TIM16_RELEASE_RESET __HAL_RCC_TIM16_RELEASE_RESET +#define __TIM17_CLK_DISABLE __HAL_RCC_TIM17_CLK_DISABLE +#define __TIM17_CLK_ENABLE __HAL_RCC_TIM17_CLK_ENABLE +#define __TIM17_CLK_SLEEP_DISABLE __HAL_RCC_TIM17_CLK_SLEEP_DISABLE +#define __TIM17_CLK_SLEEP_ENABLE __HAL_RCC_TIM17_CLK_SLEEP_ENABLE +#define __TIM17_FORCE_RESET __HAL_RCC_TIM17_FORCE_RESET +#define __TIM17_RELEASE_RESET __HAL_RCC_TIM17_RELEASE_RESET +#define __TIM2_CLK_DISABLE __HAL_RCC_TIM2_CLK_DISABLE +#define __TIM2_CLK_ENABLE __HAL_RCC_TIM2_CLK_ENABLE +#define __TIM2_CLK_SLEEP_DISABLE __HAL_RCC_TIM2_CLK_SLEEP_DISABLE +#define __TIM2_CLK_SLEEP_ENABLE __HAL_RCC_TIM2_CLK_SLEEP_ENABLE +#define __TIM2_FORCE_RESET __HAL_RCC_TIM2_FORCE_RESET +#define __TIM2_RELEASE_RESET __HAL_RCC_TIM2_RELEASE_RESET +#define __TIM3_CLK_DISABLE __HAL_RCC_TIM3_CLK_DISABLE +#define __TIM3_CLK_ENABLE __HAL_RCC_TIM3_CLK_ENABLE +#define __TIM3_CLK_SLEEP_DISABLE __HAL_RCC_TIM3_CLK_SLEEP_DISABLE +#define __TIM3_CLK_SLEEP_ENABLE __HAL_RCC_TIM3_CLK_SLEEP_ENABLE +#define __TIM3_FORCE_RESET __HAL_RCC_TIM3_FORCE_RESET +#define __TIM3_RELEASE_RESET __HAL_RCC_TIM3_RELEASE_RESET +#define __TIM4_CLK_DISABLE __HAL_RCC_TIM4_CLK_DISABLE +#define __TIM4_CLK_ENABLE __HAL_RCC_TIM4_CLK_ENABLE +#define __TIM4_CLK_SLEEP_DISABLE __HAL_RCC_TIM4_CLK_SLEEP_DISABLE +#define __TIM4_CLK_SLEEP_ENABLE __HAL_RCC_TIM4_CLK_SLEEP_ENABLE +#define __TIM4_FORCE_RESET __HAL_RCC_TIM4_FORCE_RESET +#define __TIM4_RELEASE_RESET __HAL_RCC_TIM4_RELEASE_RESET +#define __TIM5_CLK_DISABLE __HAL_RCC_TIM5_CLK_DISABLE +#define __TIM5_CLK_ENABLE __HAL_RCC_TIM5_CLK_ENABLE +#define __TIM5_CLK_SLEEP_DISABLE __HAL_RCC_TIM5_CLK_SLEEP_DISABLE +#define __TIM5_CLK_SLEEP_ENABLE __HAL_RCC_TIM5_CLK_SLEEP_ENABLE +#define __TIM5_FORCE_RESET __HAL_RCC_TIM5_FORCE_RESET +#define __TIM5_RELEASE_RESET __HAL_RCC_TIM5_RELEASE_RESET +#define __TIM6_CLK_DISABLE __HAL_RCC_TIM6_CLK_DISABLE +#define __TIM6_CLK_ENABLE __HAL_RCC_TIM6_CLK_ENABLE +#define __TIM6_CLK_SLEEP_DISABLE __HAL_RCC_TIM6_CLK_SLEEP_DISABLE +#define __TIM6_CLK_SLEEP_ENABLE __HAL_RCC_TIM6_CLK_SLEEP_ENABLE +#define __TIM6_FORCE_RESET __HAL_RCC_TIM6_FORCE_RESET +#define __TIM6_RELEASE_RESET __HAL_RCC_TIM6_RELEASE_RESET +#define __TIM7_CLK_DISABLE __HAL_RCC_TIM7_CLK_DISABLE +#define __TIM7_CLK_ENABLE __HAL_RCC_TIM7_CLK_ENABLE +#define __TIM7_CLK_SLEEP_DISABLE __HAL_RCC_TIM7_CLK_SLEEP_DISABLE +#define __TIM7_CLK_SLEEP_ENABLE __HAL_RCC_TIM7_CLK_SLEEP_ENABLE +#define __TIM7_FORCE_RESET __HAL_RCC_TIM7_FORCE_RESET +#define __TIM7_RELEASE_RESET __HAL_RCC_TIM7_RELEASE_RESET +#define __TIM8_CLK_DISABLE __HAL_RCC_TIM8_CLK_DISABLE +#define __TIM8_CLK_ENABLE __HAL_RCC_TIM8_CLK_ENABLE +#define __TIM8_CLK_SLEEP_DISABLE __HAL_RCC_TIM8_CLK_SLEEP_DISABLE +#define __TIM8_CLK_SLEEP_ENABLE __HAL_RCC_TIM8_CLK_SLEEP_ENABLE +#define __TIM8_FORCE_RESET __HAL_RCC_TIM8_FORCE_RESET +#define __TIM8_RELEASE_RESET __HAL_RCC_TIM8_RELEASE_RESET +#define __TIM9_CLK_DISABLE __HAL_RCC_TIM9_CLK_DISABLE +#define __TIM9_CLK_ENABLE __HAL_RCC_TIM9_CLK_ENABLE +#define __TIM9_FORCE_RESET __HAL_RCC_TIM9_FORCE_RESET +#define __TIM9_RELEASE_RESET __HAL_RCC_TIM9_RELEASE_RESET +#define __TSC_CLK_DISABLE __HAL_RCC_TSC_CLK_DISABLE +#define __TSC_CLK_ENABLE __HAL_RCC_TSC_CLK_ENABLE +#define __TSC_CLK_SLEEP_DISABLE __HAL_RCC_TSC_CLK_SLEEP_DISABLE +#define __TSC_CLK_SLEEP_ENABLE __HAL_RCC_TSC_CLK_SLEEP_ENABLE +#define __TSC_FORCE_RESET __HAL_RCC_TSC_FORCE_RESET +#define __TSC_RELEASE_RESET __HAL_RCC_TSC_RELEASE_RESET +#define __UART4_CLK_DISABLE __HAL_RCC_UART4_CLK_DISABLE +#define __UART4_CLK_ENABLE __HAL_RCC_UART4_CLK_ENABLE +#define __UART4_CLK_SLEEP_DISABLE __HAL_RCC_UART4_CLK_SLEEP_DISABLE +#define __UART4_CLK_SLEEP_ENABLE __HAL_RCC_UART4_CLK_SLEEP_ENABLE +#define __UART4_FORCE_RESET __HAL_RCC_UART4_FORCE_RESET +#define __UART4_RELEASE_RESET __HAL_RCC_UART4_RELEASE_RESET +#define __UART5_CLK_DISABLE __HAL_RCC_UART5_CLK_DISABLE +#define __UART5_CLK_ENABLE __HAL_RCC_UART5_CLK_ENABLE +#define __UART5_CLK_SLEEP_DISABLE __HAL_RCC_UART5_CLK_SLEEP_DISABLE +#define __UART5_CLK_SLEEP_ENABLE __HAL_RCC_UART5_CLK_SLEEP_ENABLE +#define __UART5_FORCE_RESET __HAL_RCC_UART5_FORCE_RESET +#define __UART5_RELEASE_RESET __HAL_RCC_UART5_RELEASE_RESET +#define __USART1_CLK_DISABLE __HAL_RCC_USART1_CLK_DISABLE +#define __USART1_CLK_ENABLE __HAL_RCC_USART1_CLK_ENABLE +#define __USART1_CLK_SLEEP_DISABLE __HAL_RCC_USART1_CLK_SLEEP_DISABLE +#define __USART1_CLK_SLEEP_ENABLE __HAL_RCC_USART1_CLK_SLEEP_ENABLE +#define __USART1_FORCE_RESET __HAL_RCC_USART1_FORCE_RESET +#define __USART1_RELEASE_RESET __HAL_RCC_USART1_RELEASE_RESET +#define __USART2_CLK_DISABLE __HAL_RCC_USART2_CLK_DISABLE +#define __USART2_CLK_ENABLE __HAL_RCC_USART2_CLK_ENABLE +#define __USART2_CLK_SLEEP_DISABLE __HAL_RCC_USART2_CLK_SLEEP_DISABLE +#define __USART2_CLK_SLEEP_ENABLE __HAL_RCC_USART2_CLK_SLEEP_ENABLE +#define __USART2_FORCE_RESET __HAL_RCC_USART2_FORCE_RESET +#define __USART2_RELEASE_RESET __HAL_RCC_USART2_RELEASE_RESET +#define __USART3_CLK_DISABLE __HAL_RCC_USART3_CLK_DISABLE +#define __USART3_CLK_ENABLE __HAL_RCC_USART3_CLK_ENABLE +#define __USART3_CLK_SLEEP_DISABLE __HAL_RCC_USART3_CLK_SLEEP_DISABLE +#define __USART3_CLK_SLEEP_ENABLE __HAL_RCC_USART3_CLK_SLEEP_ENABLE +#define __USART3_FORCE_RESET __HAL_RCC_USART3_FORCE_RESET +#define __USART3_RELEASE_RESET __HAL_RCC_USART3_RELEASE_RESET +#define __USART4_CLK_DISABLE __HAL_RCC_USART4_CLK_DISABLE +#define __USART4_CLK_ENABLE __HAL_RCC_USART4_CLK_ENABLE +#define __USART4_CLK_SLEEP_ENABLE __HAL_RCC_USART4_CLK_SLEEP_ENABLE +#define __USART4_CLK_SLEEP_DISABLE __HAL_RCC_USART4_CLK_SLEEP_DISABLE +#define __USART4_FORCE_RESET __HAL_RCC_USART4_FORCE_RESET +#define __USART4_RELEASE_RESET __HAL_RCC_USART4_RELEASE_RESET +#define __USART5_CLK_DISABLE __HAL_RCC_USART5_CLK_DISABLE +#define __USART5_CLK_ENABLE __HAL_RCC_USART5_CLK_ENABLE +#define __USART5_CLK_SLEEP_ENABLE __HAL_RCC_USART5_CLK_SLEEP_ENABLE +#define __USART5_CLK_SLEEP_DISABLE __HAL_RCC_USART5_CLK_SLEEP_DISABLE +#define __USART5_FORCE_RESET __HAL_RCC_USART5_FORCE_RESET +#define __USART5_RELEASE_RESET __HAL_RCC_USART5_RELEASE_RESET +#define __USART7_CLK_DISABLE __HAL_RCC_USART7_CLK_DISABLE +#define __USART7_CLK_ENABLE __HAL_RCC_USART7_CLK_ENABLE +#define __USART7_FORCE_RESET __HAL_RCC_USART7_FORCE_RESET +#define __USART7_RELEASE_RESET __HAL_RCC_USART7_RELEASE_RESET +#define __USART8_CLK_DISABLE __HAL_RCC_USART8_CLK_DISABLE +#define __USART8_CLK_ENABLE __HAL_RCC_USART8_CLK_ENABLE +#define __USART8_FORCE_RESET __HAL_RCC_USART8_FORCE_RESET +#define __USART8_RELEASE_RESET __HAL_RCC_USART8_RELEASE_RESET +#define __USB_CLK_DISABLE __HAL_RCC_USB_CLK_DISABLE +#define __USB_CLK_ENABLE __HAL_RCC_USB_CLK_ENABLE +#define __USB_FORCE_RESET __HAL_RCC_USB_FORCE_RESET +#define __USB_CLK_SLEEP_ENABLE __HAL_RCC_USB_CLK_SLEEP_ENABLE +#define __USB_CLK_SLEEP_DISABLE __HAL_RCC_USB_CLK_SLEEP_DISABLE +#define __USB_OTG_FS_CLK_DISABLE __HAL_RCC_USB_OTG_FS_CLK_DISABLE +#define __USB_OTG_FS_CLK_ENABLE __HAL_RCC_USB_OTG_FS_CLK_ENABLE +#define __USB_RELEASE_RESET __HAL_RCC_USB_RELEASE_RESET +#define __WWDG_CLK_DISABLE __HAL_RCC_WWDG_CLK_DISABLE +#define __WWDG_CLK_ENABLE __HAL_RCC_WWDG_CLK_ENABLE +#define __WWDG_CLK_SLEEP_DISABLE __HAL_RCC_WWDG_CLK_SLEEP_DISABLE +#define __WWDG_CLK_SLEEP_ENABLE __HAL_RCC_WWDG_CLK_SLEEP_ENABLE +#define __WWDG_FORCE_RESET __HAL_RCC_WWDG_FORCE_RESET +#define __WWDG_RELEASE_RESET __HAL_RCC_WWDG_RELEASE_RESET +#define __TIM21_CLK_ENABLE __HAL_RCC_TIM21_CLK_ENABLE +#define __TIM21_CLK_DISABLE __HAL_RCC_TIM21_CLK_DISABLE +#define __TIM21_FORCE_RESET __HAL_RCC_TIM21_FORCE_RESET +#define __TIM21_RELEASE_RESET __HAL_RCC_TIM21_RELEASE_RESET +#define __TIM21_CLK_SLEEP_ENABLE __HAL_RCC_TIM21_CLK_SLEEP_ENABLE +#define __TIM21_CLK_SLEEP_DISABLE __HAL_RCC_TIM21_CLK_SLEEP_DISABLE +#define __TIM22_CLK_ENABLE __HAL_RCC_TIM22_CLK_ENABLE +#define __TIM22_CLK_DISABLE __HAL_RCC_TIM22_CLK_DISABLE +#define __TIM22_FORCE_RESET __HAL_RCC_TIM22_FORCE_RESET +#define __TIM22_RELEASE_RESET __HAL_RCC_TIM22_RELEASE_RESET +#define __TIM22_CLK_SLEEP_ENABLE __HAL_RCC_TIM22_CLK_SLEEP_ENABLE +#define __TIM22_CLK_SLEEP_DISABLE __HAL_RCC_TIM22_CLK_SLEEP_DISABLE +#define __CRS_CLK_DISABLE __HAL_RCC_CRS_CLK_DISABLE +#define __CRS_CLK_ENABLE __HAL_RCC_CRS_CLK_ENABLE +#define __CRS_CLK_SLEEP_DISABLE __HAL_RCC_CRS_CLK_SLEEP_DISABLE +#define __CRS_CLK_SLEEP_ENABLE __HAL_RCC_CRS_CLK_SLEEP_ENABLE +#define __CRS_FORCE_RESET __HAL_RCC_CRS_FORCE_RESET +#define __CRS_RELEASE_RESET __HAL_RCC_CRS_RELEASE_RESET +#define __RCC_BACKUPRESET_FORCE __HAL_RCC_BACKUPRESET_FORCE +#define __RCC_BACKUPRESET_RELEASE __HAL_RCC_BACKUPRESET_RELEASE + +#define __USB_OTG_FS_FORCE_RESET __HAL_RCC_USB_OTG_FS_FORCE_RESET +#define __USB_OTG_FS_RELEASE_RESET __HAL_RCC_USB_OTG_FS_RELEASE_RESET +#define __USB_OTG_FS_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE +#define __USB_OTG_FS_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE +#define __USB_OTG_HS_CLK_DISABLE __HAL_RCC_USB_OTG_HS_CLK_DISABLE +#define __USB_OTG_HS_CLK_ENABLE __HAL_RCC_USB_OTG_HS_CLK_ENABLE +#define __USB_OTG_HS_ULPI_CLK_ENABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE +#define __USB_OTG_HS_ULPI_CLK_DISABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_DISABLE +#define __TIM9_CLK_SLEEP_ENABLE __HAL_RCC_TIM9_CLK_SLEEP_ENABLE +#define __TIM9_CLK_SLEEP_DISABLE __HAL_RCC_TIM9_CLK_SLEEP_DISABLE +#define __TIM10_CLK_SLEEP_ENABLE __HAL_RCC_TIM10_CLK_SLEEP_ENABLE +#define __TIM10_CLK_SLEEP_DISABLE __HAL_RCC_TIM10_CLK_SLEEP_DISABLE +#define __TIM11_CLK_SLEEP_ENABLE __HAL_RCC_TIM11_CLK_SLEEP_ENABLE +#define __TIM11_CLK_SLEEP_DISABLE __HAL_RCC_TIM11_CLK_SLEEP_DISABLE +#define __ETHMACPTP_CLK_SLEEP_ENABLE __HAL_RCC_ETHMACPTP_CLK_SLEEP_ENABLE +#define __ETHMACPTP_CLK_SLEEP_DISABLE __HAL_RCC_ETHMACPTP_CLK_SLEEP_DISABLE +#define __ETHMACPTP_CLK_ENABLE __HAL_RCC_ETHMACPTP_CLK_ENABLE +#define __ETHMACPTP_CLK_DISABLE __HAL_RCC_ETHMACPTP_CLK_DISABLE +#define __HASH_CLK_ENABLE __HAL_RCC_HASH_CLK_ENABLE +#define __HASH_FORCE_RESET __HAL_RCC_HASH_FORCE_RESET +#define __HASH_RELEASE_RESET __HAL_RCC_HASH_RELEASE_RESET +#define __HASH_CLK_SLEEP_ENABLE __HAL_RCC_HASH_CLK_SLEEP_ENABLE +#define __HASH_CLK_SLEEP_DISABLE __HAL_RCC_HASH_CLK_SLEEP_DISABLE +#define __HASH_CLK_DISABLE __HAL_RCC_HASH_CLK_DISABLE +#define __SPI5_CLK_ENABLE __HAL_RCC_SPI5_CLK_ENABLE +#define __SPI5_CLK_DISABLE __HAL_RCC_SPI5_CLK_DISABLE +#define __SPI5_FORCE_RESET __HAL_RCC_SPI5_FORCE_RESET +#define __SPI5_RELEASE_RESET __HAL_RCC_SPI5_RELEASE_RESET +#define __SPI5_CLK_SLEEP_ENABLE __HAL_RCC_SPI5_CLK_SLEEP_ENABLE +#define __SPI5_CLK_SLEEP_DISABLE __HAL_RCC_SPI5_CLK_SLEEP_DISABLE +#define __SPI6_CLK_ENABLE __HAL_RCC_SPI6_CLK_ENABLE +#define __SPI6_CLK_DISABLE __HAL_RCC_SPI6_CLK_DISABLE +#define __SPI6_FORCE_RESET __HAL_RCC_SPI6_FORCE_RESET +#define __SPI6_RELEASE_RESET __HAL_RCC_SPI6_RELEASE_RESET +#define __SPI6_CLK_SLEEP_ENABLE __HAL_RCC_SPI6_CLK_SLEEP_ENABLE +#define __SPI6_CLK_SLEEP_DISABLE __HAL_RCC_SPI6_CLK_SLEEP_DISABLE +#define __LTDC_CLK_ENABLE __HAL_RCC_LTDC_CLK_ENABLE +#define __LTDC_CLK_DISABLE __HAL_RCC_LTDC_CLK_DISABLE +#define __LTDC_FORCE_RESET __HAL_RCC_LTDC_FORCE_RESET +#define __LTDC_RELEASE_RESET __HAL_RCC_LTDC_RELEASE_RESET +#define __LTDC_CLK_SLEEP_ENABLE __HAL_RCC_LTDC_CLK_SLEEP_ENABLE +#define __ETHMAC_CLK_SLEEP_ENABLE __HAL_RCC_ETHMAC_CLK_SLEEP_ENABLE +#define __ETHMAC_CLK_SLEEP_DISABLE __HAL_RCC_ETHMAC_CLK_SLEEP_DISABLE +#define __ETHMACTX_CLK_SLEEP_ENABLE __HAL_RCC_ETHMACTX_CLK_SLEEP_ENABLE +#define __ETHMACTX_CLK_SLEEP_DISABLE __HAL_RCC_ETHMACTX_CLK_SLEEP_DISABLE +#define __ETHMACRX_CLK_SLEEP_ENABLE __HAL_RCC_ETHMACRX_CLK_SLEEP_ENABLE +#define __ETHMACRX_CLK_SLEEP_DISABLE __HAL_RCC_ETHMACRX_CLK_SLEEP_DISABLE +#define __TIM12_CLK_SLEEP_ENABLE __HAL_RCC_TIM12_CLK_SLEEP_ENABLE +#define __TIM12_CLK_SLEEP_DISABLE __HAL_RCC_TIM12_CLK_SLEEP_DISABLE +#define __TIM13_CLK_SLEEP_ENABLE __HAL_RCC_TIM13_CLK_SLEEP_ENABLE +#define __TIM13_CLK_SLEEP_DISABLE __HAL_RCC_TIM13_CLK_SLEEP_DISABLE +#define __TIM14_CLK_SLEEP_ENABLE __HAL_RCC_TIM14_CLK_SLEEP_ENABLE +#define __TIM14_CLK_SLEEP_DISABLE __HAL_RCC_TIM14_CLK_SLEEP_DISABLE +#define __BKPSRAM_CLK_ENABLE __HAL_RCC_BKPSRAM_CLK_ENABLE +#define __BKPSRAM_CLK_DISABLE __HAL_RCC_BKPSRAM_CLK_DISABLE +#define __BKPSRAM_CLK_SLEEP_ENABLE __HAL_RCC_BKPSRAM_CLK_SLEEP_ENABLE +#define __BKPSRAM_CLK_SLEEP_DISABLE __HAL_RCC_BKPSRAM_CLK_SLEEP_DISABLE +#define __CCMDATARAMEN_CLK_ENABLE __HAL_RCC_CCMDATARAMEN_CLK_ENABLE +#define __CCMDATARAMEN_CLK_DISABLE __HAL_RCC_CCMDATARAMEN_CLK_DISABLE +#define __USART6_CLK_ENABLE __HAL_RCC_USART6_CLK_ENABLE +#define __USART6_CLK_DISABLE __HAL_RCC_USART6_CLK_DISABLE +#define __USART6_FORCE_RESET __HAL_RCC_USART6_FORCE_RESET +#define __USART6_RELEASE_RESET __HAL_RCC_USART6_RELEASE_RESET +#define __USART6_CLK_SLEEP_ENABLE __HAL_RCC_USART6_CLK_SLEEP_ENABLE +#define __USART6_CLK_SLEEP_DISABLE __HAL_RCC_USART6_CLK_SLEEP_DISABLE +#define __SPI4_CLK_ENABLE __HAL_RCC_SPI4_CLK_ENABLE +#define __SPI4_CLK_DISABLE __HAL_RCC_SPI4_CLK_DISABLE +#define __SPI4_FORCE_RESET __HAL_RCC_SPI4_FORCE_RESET +#define __SPI4_RELEASE_RESET __HAL_RCC_SPI4_RELEASE_RESET +#define __SPI4_CLK_SLEEP_ENABLE __HAL_RCC_SPI4_CLK_SLEEP_ENABLE +#define __SPI4_CLK_SLEEP_DISABLE __HAL_RCC_SPI4_CLK_SLEEP_DISABLE +#define __GPIOI_CLK_ENABLE __HAL_RCC_GPIOI_CLK_ENABLE +#define __GPIOI_CLK_DISABLE __HAL_RCC_GPIOI_CLK_DISABLE +#define __GPIOI_FORCE_RESET __HAL_RCC_GPIOI_FORCE_RESET +#define __GPIOI_RELEASE_RESET __HAL_RCC_GPIOI_RELEASE_RESET +#define __GPIOI_CLK_SLEEP_ENABLE __HAL_RCC_GPIOI_CLK_SLEEP_ENABLE +#define __GPIOI_CLK_SLEEP_DISABLE __HAL_RCC_GPIOI_CLK_SLEEP_DISABLE +#define __GPIOJ_CLK_ENABLE __HAL_RCC_GPIOJ_CLK_ENABLE +#define __GPIOJ_CLK_DISABLE __HAL_RCC_GPIOJ_CLK_DISABLE +#define __GPIOJ_FORCE_RESET __HAL_RCC_GPIOJ_FORCE_RESET +#define __GPIOJ_RELEASE_RESET __HAL_RCC_GPIOJ_RELEASE_RESET +#define __GPIOJ_CLK_SLEEP_ENABLE __HAL_RCC_GPIOJ_CLK_SLEEP_ENABLE +#define __GPIOJ_CLK_SLEEP_DISABLE __HAL_RCC_GPIOJ_CLK_SLEEP_DISABLE +#define __GPIOK_CLK_ENABLE __HAL_RCC_GPIOK_CLK_ENABLE +#define __GPIOK_CLK_DISABLE __HAL_RCC_GPIOK_CLK_DISABLE +#define __GPIOK_RELEASE_RESET __HAL_RCC_GPIOK_RELEASE_RESET +#define __GPIOK_CLK_SLEEP_ENABLE __HAL_RCC_GPIOK_CLK_SLEEP_ENABLE +#define __GPIOK_CLK_SLEEP_DISABLE __HAL_RCC_GPIOK_CLK_SLEEP_DISABLE +#define __ETH_CLK_ENABLE __HAL_RCC_ETH_CLK_ENABLE +#define __ETH_CLK_DISABLE __HAL_RCC_ETH_CLK_DISABLE +#define __DCMI_CLK_ENABLE __HAL_RCC_DCMI_CLK_ENABLE +#define __DCMI_CLK_DISABLE __HAL_RCC_DCMI_CLK_DISABLE +#define __DCMI_FORCE_RESET __HAL_RCC_DCMI_FORCE_RESET +#define __DCMI_RELEASE_RESET __HAL_RCC_DCMI_RELEASE_RESET +#define __DCMI_CLK_SLEEP_ENABLE __HAL_RCC_DCMI_CLK_SLEEP_ENABLE +#define __DCMI_CLK_SLEEP_DISABLE __HAL_RCC_DCMI_CLK_SLEEP_DISABLE +#define __UART7_CLK_ENABLE __HAL_RCC_UART7_CLK_ENABLE +#define __UART7_CLK_DISABLE __HAL_RCC_UART7_CLK_DISABLE +#define __UART7_RELEASE_RESET __HAL_RCC_UART7_RELEASE_RESET +#define __UART7_FORCE_RESET __HAL_RCC_UART7_FORCE_RESET +#define __UART7_CLK_SLEEP_ENABLE __HAL_RCC_UART7_CLK_SLEEP_ENABLE +#define __UART7_CLK_SLEEP_DISABLE __HAL_RCC_UART7_CLK_SLEEP_DISABLE +#define __UART8_CLK_ENABLE __HAL_RCC_UART8_CLK_ENABLE +#define __UART8_CLK_DISABLE __HAL_RCC_UART8_CLK_DISABLE +#define __UART8_FORCE_RESET __HAL_RCC_UART8_FORCE_RESET +#define __UART8_RELEASE_RESET __HAL_RCC_UART8_RELEASE_RESET +#define __UART8_CLK_SLEEP_ENABLE __HAL_RCC_UART8_CLK_SLEEP_ENABLE +#define __UART8_CLK_SLEEP_DISABLE __HAL_RCC_UART8_CLK_SLEEP_DISABLE +#define __OTGHS_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE +#define __OTGHS_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE +#define __OTGHS_FORCE_RESET __HAL_RCC_USB_OTG_HS_FORCE_RESET +#define __OTGHS_RELEASE_RESET __HAL_RCC_USB_OTG_HS_RELEASE_RESET +#define __OTGHSULPI_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE +#define __OTGHSULPI_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE +#define __HAL_RCC_OTGHS_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE +#define __HAL_RCC_OTGHS_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE +#define __HAL_RCC_OTGHS_IS_CLK_SLEEP_ENABLED __HAL_RCC_USB_OTG_HS_IS_CLK_SLEEP_ENABLED +#define __HAL_RCC_OTGHS_IS_CLK_SLEEP_DISABLED __HAL_RCC_USB_OTG_HS_IS_CLK_SLEEP_DISABLED +#define __HAL_RCC_OTGHS_FORCE_RESET __HAL_RCC_USB_OTG_HS_FORCE_RESET +#define __HAL_RCC_OTGHS_RELEASE_RESET __HAL_RCC_USB_OTG_HS_RELEASE_RESET +#define __HAL_RCC_OTGHSULPI_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE +#define __HAL_RCC_OTGHSULPI_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE +#define __HAL_RCC_OTGHSULPI_IS_CLK_SLEEP_ENABLED __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_SLEEP_ENABLED +#define __HAL_RCC_OTGHSULPI_IS_CLK_SLEEP_DISABLED __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_SLEEP_DISABLED +#define __CRYP_FORCE_RESET __HAL_RCC_CRYP_FORCE_RESET +#define __SRAM3_CLK_SLEEP_ENABLE __HAL_RCC_SRAM3_CLK_SLEEP_ENABLE +#define __CAN2_CLK_SLEEP_ENABLE __HAL_RCC_CAN2_CLK_SLEEP_ENABLE +#define __CAN2_CLK_SLEEP_DISABLE __HAL_RCC_CAN2_CLK_SLEEP_DISABLE +#define __DAC_CLK_SLEEP_ENABLE __HAL_RCC_DAC_CLK_SLEEP_ENABLE +#define __DAC_CLK_SLEEP_DISABLE __HAL_RCC_DAC_CLK_SLEEP_DISABLE +#define __ADC2_CLK_SLEEP_ENABLE __HAL_RCC_ADC2_CLK_SLEEP_ENABLE +#define __ADC2_CLK_SLEEP_DISABLE __HAL_RCC_ADC2_CLK_SLEEP_DISABLE +#define __ADC3_CLK_SLEEP_ENABLE __HAL_RCC_ADC3_CLK_SLEEP_ENABLE +#define __ADC3_CLK_SLEEP_DISABLE __HAL_RCC_ADC3_CLK_SLEEP_DISABLE +#define __FSMC_FORCE_RESET __HAL_RCC_FSMC_FORCE_RESET +#define __FSMC_RELEASE_RESET __HAL_RCC_FSMC_RELEASE_RESET +#define __FSMC_CLK_SLEEP_ENABLE __HAL_RCC_FSMC_CLK_SLEEP_ENABLE +#define __FSMC_CLK_SLEEP_DISABLE __HAL_RCC_FSMC_CLK_SLEEP_DISABLE +#define __SDIO_FORCE_RESET __HAL_RCC_SDIO_FORCE_RESET +#define __SDIO_RELEASE_RESET __HAL_RCC_SDIO_RELEASE_RESET +#define __SDIO_CLK_SLEEP_DISABLE __HAL_RCC_SDIO_CLK_SLEEP_DISABLE +#define __SDIO_CLK_SLEEP_ENABLE __HAL_RCC_SDIO_CLK_SLEEP_ENABLE +#define __DMA2D_CLK_ENABLE __HAL_RCC_DMA2D_CLK_ENABLE +#define __DMA2D_CLK_DISABLE __HAL_RCC_DMA2D_CLK_DISABLE +#define __DMA2D_FORCE_RESET __HAL_RCC_DMA2D_FORCE_RESET +#define __DMA2D_RELEASE_RESET __HAL_RCC_DMA2D_RELEASE_RESET +#define __DMA2D_CLK_SLEEP_ENABLE __HAL_RCC_DMA2D_CLK_SLEEP_ENABLE +#define __DMA2D_CLK_SLEEP_DISABLE __HAL_RCC_DMA2D_CLK_SLEEP_DISABLE + +/* alias define maintained for legacy */ +#define __HAL_RCC_OTGFS_FORCE_RESET __HAL_RCC_USB_OTG_FS_FORCE_RESET +#define __HAL_RCC_OTGFS_RELEASE_RESET __HAL_RCC_USB_OTG_FS_RELEASE_RESET + +#define __ADC12_CLK_ENABLE __HAL_RCC_ADC12_CLK_ENABLE +#define __ADC12_CLK_DISABLE __HAL_RCC_ADC12_CLK_DISABLE +#define __ADC34_CLK_ENABLE __HAL_RCC_ADC34_CLK_ENABLE +#define __ADC34_CLK_DISABLE __HAL_RCC_ADC34_CLK_DISABLE +#define __ADC12_CLK_ENABLE __HAL_RCC_ADC12_CLK_ENABLE +#define __ADC12_CLK_DISABLE __HAL_RCC_ADC12_CLK_DISABLE +#define __DAC2_CLK_ENABLE __HAL_RCC_DAC2_CLK_ENABLE +#define __DAC2_CLK_DISABLE __HAL_RCC_DAC2_CLK_DISABLE +#define __TIM18_CLK_ENABLE __HAL_RCC_TIM18_CLK_ENABLE +#define __TIM18_CLK_DISABLE __HAL_RCC_TIM18_CLK_DISABLE +#define __TIM19_CLK_ENABLE __HAL_RCC_TIM19_CLK_ENABLE +#define __TIM19_CLK_DISABLE __HAL_RCC_TIM19_CLK_DISABLE +#define __TIM20_CLK_ENABLE __HAL_RCC_TIM20_CLK_ENABLE +#define __TIM20_CLK_DISABLE __HAL_RCC_TIM20_CLK_DISABLE +#define __HRTIM1_CLK_ENABLE __HAL_RCC_HRTIM1_CLK_ENABLE +#define __HRTIM1_CLK_DISABLE __HAL_RCC_HRTIM1_CLK_DISABLE +#define __SDADC1_CLK_ENABLE __HAL_RCC_SDADC1_CLK_ENABLE +#define __SDADC2_CLK_ENABLE __HAL_RCC_SDADC2_CLK_ENABLE +#define __SDADC3_CLK_ENABLE __HAL_RCC_SDADC3_CLK_ENABLE +#define __SDADC1_CLK_DISABLE __HAL_RCC_SDADC1_CLK_DISABLE +#define __SDADC2_CLK_DISABLE __HAL_RCC_SDADC2_CLK_DISABLE +#define __SDADC3_CLK_DISABLE __HAL_RCC_SDADC3_CLK_DISABLE + +#define __ADC12_FORCE_RESET __HAL_RCC_ADC12_FORCE_RESET +#define __ADC12_RELEASE_RESET __HAL_RCC_ADC12_RELEASE_RESET +#define __ADC34_FORCE_RESET __HAL_RCC_ADC34_FORCE_RESET +#define __ADC34_RELEASE_RESET __HAL_RCC_ADC34_RELEASE_RESET +#define __ADC12_FORCE_RESET __HAL_RCC_ADC12_FORCE_RESET +#define __ADC12_RELEASE_RESET __HAL_RCC_ADC12_RELEASE_RESET +#define __DAC2_FORCE_RESET __HAL_RCC_DAC2_FORCE_RESET +#define __DAC2_RELEASE_RESET __HAL_RCC_DAC2_RELEASE_RESET +#define __TIM18_FORCE_RESET __HAL_RCC_TIM18_FORCE_RESET +#define __TIM18_RELEASE_RESET __HAL_RCC_TIM18_RELEASE_RESET +#define __TIM19_FORCE_RESET __HAL_RCC_TIM19_FORCE_RESET +#define __TIM19_RELEASE_RESET __HAL_RCC_TIM19_RELEASE_RESET +#define __TIM20_FORCE_RESET __HAL_RCC_TIM20_FORCE_RESET +#define __TIM20_RELEASE_RESET __HAL_RCC_TIM20_RELEASE_RESET +#define __HRTIM1_FORCE_RESET __HAL_RCC_HRTIM1_FORCE_RESET +#define __HRTIM1_RELEASE_RESET __HAL_RCC_HRTIM1_RELEASE_RESET +#define __SDADC1_FORCE_RESET __HAL_RCC_SDADC1_FORCE_RESET +#define __SDADC2_FORCE_RESET __HAL_RCC_SDADC2_FORCE_RESET +#define __SDADC3_FORCE_RESET __HAL_RCC_SDADC3_FORCE_RESET +#define __SDADC1_RELEASE_RESET __HAL_RCC_SDADC1_RELEASE_RESET +#define __SDADC2_RELEASE_RESET __HAL_RCC_SDADC2_RELEASE_RESET +#define __SDADC3_RELEASE_RESET __HAL_RCC_SDADC3_RELEASE_RESET + +#define __ADC1_IS_CLK_ENABLED __HAL_RCC_ADC1_IS_CLK_ENABLED +#define __ADC1_IS_CLK_DISABLED __HAL_RCC_ADC1_IS_CLK_DISABLED +#define __ADC12_IS_CLK_ENABLED __HAL_RCC_ADC12_IS_CLK_ENABLED +#define __ADC12_IS_CLK_DISABLED __HAL_RCC_ADC12_IS_CLK_DISABLED +#define __ADC34_IS_CLK_ENABLED __HAL_RCC_ADC34_IS_CLK_ENABLED +#define __ADC34_IS_CLK_DISABLED __HAL_RCC_ADC34_IS_CLK_DISABLED +#define __CEC_IS_CLK_ENABLED __HAL_RCC_CEC_IS_CLK_ENABLED +#define __CEC_IS_CLK_DISABLED __HAL_RCC_CEC_IS_CLK_DISABLED +#define __CRC_IS_CLK_ENABLED __HAL_RCC_CRC_IS_CLK_ENABLED +#define __CRC_IS_CLK_DISABLED __HAL_RCC_CRC_IS_CLK_DISABLED +#define __DAC1_IS_CLK_ENABLED __HAL_RCC_DAC1_IS_CLK_ENABLED +#define __DAC1_IS_CLK_DISABLED __HAL_RCC_DAC1_IS_CLK_DISABLED +#define __DAC2_IS_CLK_ENABLED __HAL_RCC_DAC2_IS_CLK_ENABLED +#define __DAC2_IS_CLK_DISABLED __HAL_RCC_DAC2_IS_CLK_DISABLED +#define __DMA1_IS_CLK_ENABLED __HAL_RCC_DMA1_IS_CLK_ENABLED +#define __DMA1_IS_CLK_DISABLED __HAL_RCC_DMA1_IS_CLK_DISABLED +#define __DMA2_IS_CLK_ENABLED __HAL_RCC_DMA2_IS_CLK_ENABLED +#define __DMA2_IS_CLK_DISABLED __HAL_RCC_DMA2_IS_CLK_DISABLED +#define __FLITF_IS_CLK_ENABLED __HAL_RCC_FLITF_IS_CLK_ENABLED +#define __FLITF_IS_CLK_DISABLED __HAL_RCC_FLITF_IS_CLK_DISABLED +#define __FMC_IS_CLK_ENABLED __HAL_RCC_FMC_IS_CLK_ENABLED +#define __FMC_IS_CLK_DISABLED __HAL_RCC_FMC_IS_CLK_DISABLED +#define __GPIOA_IS_CLK_ENABLED __HAL_RCC_GPIOA_IS_CLK_ENABLED +#define __GPIOA_IS_CLK_DISABLED __HAL_RCC_GPIOA_IS_CLK_DISABLED +#define __GPIOB_IS_CLK_ENABLED __HAL_RCC_GPIOB_IS_CLK_ENABLED +#define __GPIOB_IS_CLK_DISABLED __HAL_RCC_GPIOB_IS_CLK_DISABLED +#define __GPIOC_IS_CLK_ENABLED __HAL_RCC_GPIOC_IS_CLK_ENABLED +#define __GPIOC_IS_CLK_DISABLED __HAL_RCC_GPIOC_IS_CLK_DISABLED +#define __GPIOD_IS_CLK_ENABLED __HAL_RCC_GPIOD_IS_CLK_ENABLED +#define __GPIOD_IS_CLK_DISABLED __HAL_RCC_GPIOD_IS_CLK_DISABLED +#define __GPIOE_IS_CLK_ENABLED __HAL_RCC_GPIOE_IS_CLK_ENABLED +#define __GPIOE_IS_CLK_DISABLED __HAL_RCC_GPIOE_IS_CLK_DISABLED +#define __GPIOF_IS_CLK_ENABLED __HAL_RCC_GPIOF_IS_CLK_ENABLED +#define __GPIOF_IS_CLK_DISABLED __HAL_RCC_GPIOF_IS_CLK_DISABLED +#define __GPIOG_IS_CLK_ENABLED __HAL_RCC_GPIOG_IS_CLK_ENABLED +#define __GPIOG_IS_CLK_DISABLED __HAL_RCC_GPIOG_IS_CLK_DISABLED +#define __GPIOH_IS_CLK_ENABLED __HAL_RCC_GPIOH_IS_CLK_ENABLED +#define __GPIOH_IS_CLK_DISABLED __HAL_RCC_GPIOH_IS_CLK_DISABLED +#define __HRTIM1_IS_CLK_ENABLED __HAL_RCC_HRTIM1_IS_CLK_ENABLED +#define __HRTIM1_IS_CLK_DISABLED __HAL_RCC_HRTIM1_IS_CLK_DISABLED +#define __I2C1_IS_CLK_ENABLED __HAL_RCC_I2C1_IS_CLK_ENABLED +#define __I2C1_IS_CLK_DISABLED __HAL_RCC_I2C1_IS_CLK_DISABLED +#define __I2C2_IS_CLK_ENABLED __HAL_RCC_I2C2_IS_CLK_ENABLED +#define __I2C2_IS_CLK_DISABLED __HAL_RCC_I2C2_IS_CLK_DISABLED +#define __I2C3_IS_CLK_ENABLED __HAL_RCC_I2C3_IS_CLK_ENABLED +#define __I2C3_IS_CLK_DISABLED __HAL_RCC_I2C3_IS_CLK_DISABLED +#define __PWR_IS_CLK_ENABLED __HAL_RCC_PWR_IS_CLK_ENABLED +#define __PWR_IS_CLK_DISABLED __HAL_RCC_PWR_IS_CLK_DISABLED +#define __SYSCFG_IS_CLK_ENABLED __HAL_RCC_SYSCFG_IS_CLK_ENABLED +#define __SYSCFG_IS_CLK_DISABLED __HAL_RCC_SYSCFG_IS_CLK_DISABLED +#define __SPI1_IS_CLK_ENABLED __HAL_RCC_SPI1_IS_CLK_ENABLED +#define __SPI1_IS_CLK_DISABLED __HAL_RCC_SPI1_IS_CLK_DISABLED +#define __SPI2_IS_CLK_ENABLED __HAL_RCC_SPI2_IS_CLK_ENABLED +#define __SPI2_IS_CLK_DISABLED __HAL_RCC_SPI2_IS_CLK_DISABLED +#define __SPI3_IS_CLK_ENABLED __HAL_RCC_SPI3_IS_CLK_ENABLED +#define __SPI3_IS_CLK_DISABLED __HAL_RCC_SPI3_IS_CLK_DISABLED +#define __SPI4_IS_CLK_ENABLED __HAL_RCC_SPI4_IS_CLK_ENABLED +#define __SPI4_IS_CLK_DISABLED __HAL_RCC_SPI4_IS_CLK_DISABLED +#define __SDADC1_IS_CLK_ENABLED __HAL_RCC_SDADC1_IS_CLK_ENABLED +#define __SDADC1_IS_CLK_DISABLED __HAL_RCC_SDADC1_IS_CLK_DISABLED +#define __SDADC2_IS_CLK_ENABLED __HAL_RCC_SDADC2_IS_CLK_ENABLED +#define __SDADC2_IS_CLK_DISABLED __HAL_RCC_SDADC2_IS_CLK_DISABLED +#define __SDADC3_IS_CLK_ENABLED __HAL_RCC_SDADC3_IS_CLK_ENABLED +#define __SDADC3_IS_CLK_DISABLED __HAL_RCC_SDADC3_IS_CLK_DISABLED +#define __SRAM_IS_CLK_ENABLED __HAL_RCC_SRAM_IS_CLK_ENABLED +#define __SRAM_IS_CLK_DISABLED __HAL_RCC_SRAM_IS_CLK_DISABLED +#define __TIM1_IS_CLK_ENABLED __HAL_RCC_TIM1_IS_CLK_ENABLED +#define __TIM1_IS_CLK_DISABLED __HAL_RCC_TIM1_IS_CLK_DISABLED +#define __TIM2_IS_CLK_ENABLED __HAL_RCC_TIM2_IS_CLK_ENABLED +#define __TIM2_IS_CLK_DISABLED __HAL_RCC_TIM2_IS_CLK_DISABLED +#define __TIM3_IS_CLK_ENABLED __HAL_RCC_TIM3_IS_CLK_ENABLED +#define __TIM3_IS_CLK_DISABLED __HAL_RCC_TIM3_IS_CLK_DISABLED +#define __TIM4_IS_CLK_ENABLED __HAL_RCC_TIM4_IS_CLK_ENABLED +#define __TIM4_IS_CLK_DISABLED __HAL_RCC_TIM4_IS_CLK_DISABLED +#define __TIM5_IS_CLK_ENABLED __HAL_RCC_TIM5_IS_CLK_ENABLED +#define __TIM5_IS_CLK_DISABLED __HAL_RCC_TIM5_IS_CLK_DISABLED +#define __TIM6_IS_CLK_ENABLED __HAL_RCC_TIM6_IS_CLK_ENABLED +#define __TIM6_IS_CLK_DISABLED __HAL_RCC_TIM6_IS_CLK_DISABLED +#define __TIM7_IS_CLK_ENABLED __HAL_RCC_TIM7_IS_CLK_ENABLED +#define __TIM7_IS_CLK_DISABLED __HAL_RCC_TIM7_IS_CLK_DISABLED +#define __TIM8_IS_CLK_ENABLED __HAL_RCC_TIM8_IS_CLK_ENABLED +#define __TIM8_IS_CLK_DISABLED __HAL_RCC_TIM8_IS_CLK_DISABLED +#define __TIM12_IS_CLK_ENABLED __HAL_RCC_TIM12_IS_CLK_ENABLED +#define __TIM12_IS_CLK_DISABLED __HAL_RCC_TIM12_IS_CLK_DISABLED +#define __TIM13_IS_CLK_ENABLED __HAL_RCC_TIM13_IS_CLK_ENABLED +#define __TIM13_IS_CLK_DISABLED __HAL_RCC_TIM13_IS_CLK_DISABLED +#define __TIM14_IS_CLK_ENABLED __HAL_RCC_TIM14_IS_CLK_ENABLED +#define __TIM14_IS_CLK_DISABLED __HAL_RCC_TIM14_IS_CLK_DISABLED +#define __TIM15_IS_CLK_ENABLED __HAL_RCC_TIM15_IS_CLK_ENABLED +#define __TIM15_IS_CLK_DISABLED __HAL_RCC_TIM15_IS_CLK_DISABLED +#define __TIM16_IS_CLK_ENABLED __HAL_RCC_TIM16_IS_CLK_ENABLED +#define __TIM16_IS_CLK_DISABLED __HAL_RCC_TIM16_IS_CLK_DISABLED +#define __TIM17_IS_CLK_ENABLED __HAL_RCC_TIM17_IS_CLK_ENABLED +#define __TIM17_IS_CLK_DISABLED __HAL_RCC_TIM17_IS_CLK_DISABLED +#define __TIM18_IS_CLK_ENABLED __HAL_RCC_TIM18_IS_CLK_ENABLED +#define __TIM18_IS_CLK_DISABLED __HAL_RCC_TIM18_IS_CLK_DISABLED +#define __TIM19_IS_CLK_ENABLED __HAL_RCC_TIM19_IS_CLK_ENABLED +#define __TIM19_IS_CLK_DISABLED __HAL_RCC_TIM19_IS_CLK_DISABLED +#define __TIM20_IS_CLK_ENABLED __HAL_RCC_TIM20_IS_CLK_ENABLED +#define __TIM20_IS_CLK_DISABLED __HAL_RCC_TIM20_IS_CLK_DISABLED +#define __TSC_IS_CLK_ENABLED __HAL_RCC_TSC_IS_CLK_ENABLED +#define __TSC_IS_CLK_DISABLED __HAL_RCC_TSC_IS_CLK_DISABLED +#define __UART4_IS_CLK_ENABLED __HAL_RCC_UART4_IS_CLK_ENABLED +#define __UART4_IS_CLK_DISABLED __HAL_RCC_UART4_IS_CLK_DISABLED +#define __UART5_IS_CLK_ENABLED __HAL_RCC_UART5_IS_CLK_ENABLED +#define __UART5_IS_CLK_DISABLED __HAL_RCC_UART5_IS_CLK_DISABLED +#define __USART1_IS_CLK_ENABLED __HAL_RCC_USART1_IS_CLK_ENABLED +#define __USART1_IS_CLK_DISABLED __HAL_RCC_USART1_IS_CLK_DISABLED +#define __USART2_IS_CLK_ENABLED __HAL_RCC_USART2_IS_CLK_ENABLED +#define __USART2_IS_CLK_DISABLED __HAL_RCC_USART2_IS_CLK_DISABLED +#define __USART3_IS_CLK_ENABLED __HAL_RCC_USART3_IS_CLK_ENABLED +#define __USART3_IS_CLK_DISABLED __HAL_RCC_USART3_IS_CLK_DISABLED +#define __USB_IS_CLK_ENABLED __HAL_RCC_USB_IS_CLK_ENABLED +#define __USB_IS_CLK_DISABLED __HAL_RCC_USB_IS_CLK_DISABLED +#define __WWDG_IS_CLK_ENABLED __HAL_RCC_WWDG_IS_CLK_ENABLED +#define __WWDG_IS_CLK_DISABLED __HAL_RCC_WWDG_IS_CLK_DISABLED + +#if defined(STM32F4) +#define __HAL_RCC_SDMMC1_FORCE_RESET __HAL_RCC_SDIO_FORCE_RESET +#define __HAL_RCC_SDMMC1_RELEASE_RESET __HAL_RCC_SDIO_RELEASE_RESET +#define __HAL_RCC_SDMMC1_CLK_SLEEP_ENABLE __HAL_RCC_SDIO_CLK_SLEEP_ENABLE +#define __HAL_RCC_SDMMC1_CLK_SLEEP_DISABLE __HAL_RCC_SDIO_CLK_SLEEP_DISABLE +#define __HAL_RCC_SDMMC1_CLK_ENABLE __HAL_RCC_SDIO_CLK_ENABLE +#define __HAL_RCC_SDMMC1_CLK_DISABLE __HAL_RCC_SDIO_CLK_DISABLE +#define __HAL_RCC_SDMMC1_IS_CLK_ENABLED __HAL_RCC_SDIO_IS_CLK_ENABLED +#define __HAL_RCC_SDMMC1_IS_CLK_DISABLED __HAL_RCC_SDIO_IS_CLK_DISABLED +#define Sdmmc1ClockSelection SdioClockSelection +#define RCC_PERIPHCLK_SDMMC1 RCC_PERIPHCLK_SDIO +#define RCC_SDMMC1CLKSOURCE_CLK48 RCC_SDIOCLKSOURCE_CK48 +#define RCC_SDMMC1CLKSOURCE_SYSCLK RCC_SDIOCLKSOURCE_SYSCLK +#define __HAL_RCC_SDMMC1_CONFIG __HAL_RCC_SDIO_CONFIG +#define __HAL_RCC_GET_SDMMC1_SOURCE __HAL_RCC_GET_SDIO_SOURCE +#endif + +#if defined(STM32F7) || defined(STM32L4) +#define __HAL_RCC_SDIO_FORCE_RESET __HAL_RCC_SDMMC1_FORCE_RESET +#define __HAL_RCC_SDIO_RELEASE_RESET __HAL_RCC_SDMMC1_RELEASE_RESET +#define __HAL_RCC_SDIO_CLK_SLEEP_ENABLE __HAL_RCC_SDMMC1_CLK_SLEEP_ENABLE +#define __HAL_RCC_SDIO_CLK_SLEEP_DISABLE __HAL_RCC_SDMMC1_CLK_SLEEP_DISABLE +#define __HAL_RCC_SDIO_CLK_ENABLE __HAL_RCC_SDMMC1_CLK_ENABLE +#define __HAL_RCC_SDIO_CLK_DISABLE __HAL_RCC_SDMMC1_CLK_DISABLE +#define __HAL_RCC_SDIO_IS_CLK_ENABLED __HAL_RCC_SDMMC1_IS_CLK_ENABLED +#define __HAL_RCC_SDIO_IS_CLK_DISABLED __HAL_RCC_SDMMC1_IS_CLK_DISABLED +#define SdioClockSelection Sdmmc1ClockSelection +#define RCC_PERIPHCLK_SDIO RCC_PERIPHCLK_SDMMC1 +#define __HAL_RCC_SDIO_CONFIG __HAL_RCC_SDMMC1_CONFIG +#define __HAL_RCC_GET_SDIO_SOURCE __HAL_RCC_GET_SDMMC1_SOURCE +#endif + +#if defined(STM32F7) +#define RCC_SDIOCLKSOURCE_CLK48 RCC_SDMMC1CLKSOURCE_CLK48 +#define RCC_SDIOCLKSOURCE_SYSCLK RCC_SDMMC1CLKSOURCE_SYSCLK +#endif + +#define __HAL_RCC_I2SCLK __HAL_RCC_I2S_CONFIG +#define __HAL_RCC_I2SCLK_CONFIG __HAL_RCC_I2S_CONFIG + +#define __RCC_PLLSRC RCC_GET_PLL_OSCSOURCE + +#define IS_RCC_MSIRANGE IS_RCC_MSI_CLOCK_RANGE +#define IS_RCC_RTCCLK_SOURCE IS_RCC_RTCCLKSOURCE +#define IS_RCC_SYSCLK_DIV IS_RCC_HCLK +#define IS_RCC_HCLK_DIV IS_RCC_PCLK +#define IS_RCC_PERIPHCLK IS_RCC_PERIPHCLOCK + +#define RCC_IT_HSI14 RCC_IT_HSI14RDY + +#if defined(STM32L0) +#define RCC_IT_LSECSS RCC_IT_CSSLSE +#define RCC_IT_CSS RCC_IT_CSSHSE +#endif + +#define IS_RCC_MCOSOURCE IS_RCC_MCO1SOURCE +#define __HAL_RCC_MCO_CONFIG __HAL_RCC_MCO1_CONFIG +#define RCC_MCO_NODIV RCC_MCODIV_1 +#define RCC_MCO_DIV1 RCC_MCODIV_1 +#define RCC_MCO_DIV2 RCC_MCODIV_2 +#define RCC_MCO_DIV4 RCC_MCODIV_4 +#define RCC_MCO_DIV8 RCC_MCODIV_8 +#define RCC_MCO_DIV16 RCC_MCODIV_16 +#define RCC_MCO_DIV32 RCC_MCODIV_32 +#define RCC_MCO_DIV64 RCC_MCODIV_64 +#define RCC_MCO_DIV128 RCC_MCODIV_128 +#define RCC_MCOSOURCE_NONE RCC_MCO1SOURCE_NOCLOCK +#define RCC_MCOSOURCE_LSI RCC_MCO1SOURCE_LSI +#define RCC_MCOSOURCE_LSE RCC_MCO1SOURCE_LSE +#define RCC_MCOSOURCE_SYSCLK RCC_MCO1SOURCE_SYSCLK +#define RCC_MCOSOURCE_HSI RCC_MCO1SOURCE_HSI +#define RCC_MCOSOURCE_HSI14 RCC_MCO1SOURCE_HSI14 +#define RCC_MCOSOURCE_HSI48 RCC_MCO1SOURCE_HSI48 +#define RCC_MCOSOURCE_HSE RCC_MCO1SOURCE_HSE +#define RCC_MCOSOURCE_PLLCLK_DIV1 RCC_MCO1SOURCE_PLLCLK +#define RCC_MCOSOURCE_PLLCLK_NODIV RCC_MCO1SOURCE_PLLCLK +#define RCC_MCOSOURCE_PLLCLK_DIV2 RCC_MCO1SOURCE_PLLCLK_DIV2 + +#define RCC_RTCCLKSOURCE_NONE RCC_RTCCLKSOURCE_NO_CLK + +#define RCC_USBCLK_PLLSAI1 RCC_USBCLKSOURCE_PLLSAI1 +#define RCC_USBCLK_PLL RCC_USBCLKSOURCE_PLL +#define RCC_USBCLK_MSI RCC_USBCLKSOURCE_MSI +#define RCC_USBCLKSOURCE_PLLCLK RCC_USBCLKSOURCE_PLL +#define RCC_USBPLLCLK_DIV1 RCC_USBCLKSOURCE_PLL +#define RCC_USBPLLCLK_DIV1_5 RCC_USBCLKSOURCE_PLL_DIV1_5 +#define RCC_USBPLLCLK_DIV2 RCC_USBCLKSOURCE_PLL_DIV2 +#define RCC_USBPLLCLK_DIV3 RCC_USBCLKSOURCE_PLL_DIV3 + +#define HSION_BitNumber RCC_HSION_BIT_NUMBER +#define HSION_BITNUMBER RCC_HSION_BIT_NUMBER +#define HSEON_BitNumber RCC_HSEON_BIT_NUMBER +#define HSEON_BITNUMBER RCC_HSEON_BIT_NUMBER +#define MSION_BITNUMBER RCC_MSION_BIT_NUMBER +#define CSSON_BitNumber RCC_CSSON_BIT_NUMBER +#define CSSON_BITNUMBER RCC_CSSON_BIT_NUMBER +#define PLLON_BitNumber RCC_PLLON_BIT_NUMBER +#define PLLON_BITNUMBER RCC_PLLON_BIT_NUMBER +#define PLLI2SON_BitNumber RCC_PLLI2SON_BIT_NUMBER +#define I2SSRC_BitNumber RCC_I2SSRC_BIT_NUMBER +#define RTCEN_BitNumber RCC_RTCEN_BIT_NUMBER +#define RTCEN_BITNUMBER RCC_RTCEN_BIT_NUMBER +#define BDRST_BitNumber RCC_BDRST_BIT_NUMBER +#define BDRST_BITNUMBER RCC_BDRST_BIT_NUMBER +#define RTCRST_BITNUMBER RCC_RTCRST_BIT_NUMBER +#define LSION_BitNumber RCC_LSION_BIT_NUMBER +#define LSION_BITNUMBER RCC_LSION_BIT_NUMBER +#define LSEON_BitNumber RCC_LSEON_BIT_NUMBER +#define LSEON_BITNUMBER RCC_LSEON_BIT_NUMBER +#define LSEBYP_BITNUMBER RCC_LSEBYP_BIT_NUMBER +#define PLLSAION_BitNumber RCC_PLLSAION_BIT_NUMBER +#define TIMPRE_BitNumber RCC_TIMPRE_BIT_NUMBER +#define RMVF_BitNumber RCC_RMVF_BIT_NUMBER +#define RMVF_BITNUMBER RCC_RMVF_BIT_NUMBER +#define RCC_CR2_HSI14TRIM_BitNumber RCC_HSI14TRIM_BIT_NUMBER +#define CR_BYTE2_ADDRESS RCC_CR_BYTE2_ADDRESS +#define CIR_BYTE1_ADDRESS RCC_CIR_BYTE1_ADDRESS +#define CIR_BYTE2_ADDRESS RCC_CIR_BYTE2_ADDRESS +#define BDCR_BYTE0_ADDRESS RCC_BDCR_BYTE0_ADDRESS +#define DBP_TIMEOUT_VALUE RCC_DBP_TIMEOUT_VALUE +#define LSE_TIMEOUT_VALUE RCC_LSE_TIMEOUT_VALUE + +#define CR_HSION_BB RCC_CR_HSION_BB +#define CR_CSSON_BB RCC_CR_CSSON_BB +#define CR_PLLON_BB RCC_CR_PLLON_BB +#define CR_PLLI2SON_BB RCC_CR_PLLI2SON_BB +#define CR_MSION_BB RCC_CR_MSION_BB +#define CSR_LSION_BB RCC_CSR_LSION_BB +#define CSR_LSEON_BB RCC_CSR_LSEON_BB +#define CSR_LSEBYP_BB RCC_CSR_LSEBYP_BB +#define CSR_RTCEN_BB RCC_CSR_RTCEN_BB +#define CSR_RTCRST_BB RCC_CSR_RTCRST_BB +#define CFGR_I2SSRC_BB RCC_CFGR_I2SSRC_BB +#define BDCR_RTCEN_BB RCC_BDCR_RTCEN_BB +#define BDCR_BDRST_BB RCC_BDCR_BDRST_BB +#define CR_HSEON_BB RCC_CR_HSEON_BB +#define CSR_RMVF_BB RCC_CSR_RMVF_BB +#define CR_PLLSAION_BB RCC_CR_PLLSAION_BB +#define DCKCFGR_TIMPRE_BB RCC_DCKCFGR_TIMPRE_BB + +#define __HAL_RCC_CRS_ENABLE_FREQ_ERROR_COUNTER __HAL_RCC_CRS_FREQ_ERROR_COUNTER_ENABLE +#define __HAL_RCC_CRS_DISABLE_FREQ_ERROR_COUNTER __HAL_RCC_CRS_FREQ_ERROR_COUNTER_DISABLE +#define __HAL_RCC_CRS_ENABLE_AUTOMATIC_CALIB __HAL_RCC_CRS_AUTOMATIC_CALIB_ENABLE +#define __HAL_RCC_CRS_DISABLE_AUTOMATIC_CALIB __HAL_RCC_CRS_AUTOMATIC_CALIB_DISABLE +#define __HAL_RCC_CRS_CALCULATE_RELOADVALUE __HAL_RCC_CRS_RELOADVALUE_CALCULATE + +#define __HAL_RCC_GET_IT_SOURCE __HAL_RCC_GET_IT + +#define RCC_CRS_SYNCWARM RCC_CRS_SYNCWARN +#define RCC_CRS_TRIMOV RCC_CRS_TRIMOVF + +#define RCC_PERIPHCLK_CK48 RCC_PERIPHCLK_CLK48 +#define RCC_CK48CLKSOURCE_PLLQ RCC_CLK48CLKSOURCE_PLLQ +#define RCC_CK48CLKSOURCE_PLLSAIP RCC_CLK48CLKSOURCE_PLLSAIP +#define RCC_CK48CLKSOURCE_PLLI2SQ RCC_CLK48CLKSOURCE_PLLI2SQ +#define IS_RCC_CK48CLKSOURCE IS_RCC_CLK48CLKSOURCE +#define RCC_SDIOCLKSOURCE_CK48 RCC_SDIOCLKSOURCE_CLK48 + +#define __HAL_RCC_DFSDM_CLK_ENABLE __HAL_RCC_DFSDM1_CLK_ENABLE +#define __HAL_RCC_DFSDM_CLK_DISABLE __HAL_RCC_DFSDM1_CLK_DISABLE +#define __HAL_RCC_DFSDM_IS_CLK_ENABLED __HAL_RCC_DFSDM1_IS_CLK_ENABLED +#define __HAL_RCC_DFSDM_IS_CLK_DISABLED __HAL_RCC_DFSDM1_IS_CLK_DISABLED +#define __HAL_RCC_DFSDM_FORCE_RESET __HAL_RCC_DFSDM1_FORCE_RESET +#define __HAL_RCC_DFSDM_RELEASE_RESET __HAL_RCC_DFSDM1_RELEASE_RESET +#define __HAL_RCC_DFSDM_CLK_SLEEP_ENABLE __HAL_RCC_DFSDM1_CLK_SLEEP_ENABLE +#define __HAL_RCC_DFSDM_CLK_SLEEP_DISABLE __HAL_RCC_DFSDM1_CLK_SLEEP_DISABLE +#define __HAL_RCC_DFSDM_IS_CLK_SLEEP_ENABLED __HAL_RCC_DFSDM1_IS_CLK_SLEEP_ENABLED +#define __HAL_RCC_DFSDM_IS_CLK_SLEEP_DISABLED __HAL_RCC_DFSDM1_IS_CLK_SLEEP_DISABLED +#define DfsdmClockSelection Dfsdm1ClockSelection +#define RCC_PERIPHCLK_DFSDM RCC_PERIPHCLK_DFSDM1 +#define RCC_DFSDMCLKSOURCE_PCLK RCC_DFSDM1CLKSOURCE_PCLK +#define RCC_DFSDMCLKSOURCE_SYSCLK RCC_DFSDM1CLKSOURCE_SYSCLK +#define __HAL_RCC_DFSDM_CONFIG __HAL_RCC_DFSDM1_CONFIG +#define __HAL_RCC_GET_DFSDM_SOURCE __HAL_RCC_GET_DFSDM1_SOURCE + +/** + * @} + */ + +/** @defgroup HAL_RNG_Aliased_Macros HAL RNG Aliased Macros maintained for legacy purpose + * @{ + */ +#define HAL_RNG_ReadyCallback(__HANDLE__) HAL_RNG_ReadyDataCallback((__HANDLE__), uint32_t random32bit) + +/** + * @} + */ + +/** @defgroup HAL_RTC_Aliased_Macros HAL RTC Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __HAL_RTC_CLEAR_FLAG __HAL_RTC_EXTI_CLEAR_FLAG +#define __HAL_RTC_DISABLE_IT __HAL_RTC_EXTI_DISABLE_IT +#define __HAL_RTC_ENABLE_IT __HAL_RTC_EXTI_ENABLE_IT + +#if defined (STM32F1) +#define __HAL_RTC_EXTI_CLEAR_FLAG(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_CLEAR_FLAG() + +#define __HAL_RTC_EXTI_ENABLE_IT(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_ENABLE_IT() + +#define __HAL_RTC_EXTI_DISABLE_IT(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_DISABLE_IT() + +#define __HAL_RTC_EXTI_GET_FLAG(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_GET_FLAG() + +#define __HAL_RTC_EXTI_GENERATE_SWIT(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_GENERATE_SWIT() +#else +#define __HAL_RTC_EXTI_CLEAR_FLAG(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_CLEAR_FLAG() : \ + (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_CLEAR_FLAG() : \ + __HAL_RTC_TAMPER_TIMESTAMP_EXTI_CLEAR_FLAG())) +#define __HAL_RTC_EXTI_ENABLE_IT(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_ENABLE_IT() : \ + (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT() : \ + __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT())) +#define __HAL_RTC_EXTI_DISABLE_IT(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_DISABLE_IT() : \ + (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_IT() : \ + __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_IT())) +#define __HAL_RTC_EXTI_GET_FLAG(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_GET_FLAG() : \ + (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_GET_FLAG() : \ + __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GET_FLAG())) +#define __HAL_RTC_EXTI_GENERATE_SWIT(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_GENERATE_SWIT() : \ + (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_GENERATE_SWIT() : \ + __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GENERATE_SWIT())) +#endif /* STM32F1 */ + +#define IS_ALARM IS_RTC_ALARM +#define IS_ALARM_MASK IS_RTC_ALARM_MASK +#define IS_TAMPER IS_RTC_TAMPER +#define IS_TAMPER_ERASE_MODE IS_RTC_TAMPER_ERASE_MODE +#define IS_TAMPER_FILTER IS_RTC_TAMPER_FILTER +#define IS_TAMPER_INTERRUPT IS_RTC_TAMPER_INTERRUPT +#define IS_TAMPER_MASKFLAG_STATE IS_RTC_TAMPER_MASKFLAG_STATE +#define IS_TAMPER_PRECHARGE_DURATION IS_RTC_TAMPER_PRECHARGE_DURATION +#define IS_TAMPER_PULLUP_STATE IS_RTC_TAMPER_PULLUP_STATE +#define IS_TAMPER_SAMPLING_FREQ IS_RTC_TAMPER_SAMPLING_FREQ +#define IS_TAMPER_TIMESTAMPONTAMPER_DETECTION IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION +#define IS_TAMPER_TRIGGER IS_RTC_TAMPER_TRIGGER +#define IS_WAKEUP_CLOCK IS_RTC_WAKEUP_CLOCK +#define IS_WAKEUP_COUNTER IS_RTC_WAKEUP_COUNTER + +#define __RTC_WRITEPROTECTION_ENABLE __HAL_RTC_WRITEPROTECTION_ENABLE +#define __RTC_WRITEPROTECTION_DISABLE __HAL_RTC_WRITEPROTECTION_DISABLE + +/** + * @} + */ + +/** @defgroup HAL_SD_Aliased_Macros HAL SD Aliased Macros maintained for legacy purpose + * @{ + */ + +#define SD_OCR_CID_CSD_OVERWRIETE SD_OCR_CID_CSD_OVERWRITE +#define SD_CMD_SD_APP_STAUS SD_CMD_SD_APP_STATUS + +#if defined(STM32F4) +#define SD_SDMMC_DISABLED SD_SDIO_DISABLED +#define SD_SDMMC_FUNCTION_BUSY SD_SDIO_FUNCTION_BUSY +#define SD_SDMMC_FUNCTION_FAILED SD_SDIO_FUNCTION_FAILED +#define SD_SDMMC_UNKNOWN_FUNCTION SD_SDIO_UNKNOWN_FUNCTION +#define SD_CMD_SDMMC_SEN_OP_COND SD_CMD_SDIO_SEN_OP_COND +#define SD_CMD_SDMMC_RW_DIRECT SD_CMD_SDIO_RW_DIRECT +#define SD_CMD_SDMMC_RW_EXTENDED SD_CMD_SDIO_RW_EXTENDED +#define __HAL_SD_SDMMC_ENABLE __HAL_SD_SDIO_ENABLE +#define __HAL_SD_SDMMC_DISABLE __HAL_SD_SDIO_DISABLE +#define __HAL_SD_SDMMC_DMA_ENABLE __HAL_SD_SDIO_DMA_ENABLE +#define __HAL_SD_SDMMC_DMA_DISABLE __HAL_SD_SDIO_DMA_DISABL +#define __HAL_SD_SDMMC_ENABLE_IT __HAL_SD_SDIO_ENABLE_IT +#define __HAL_SD_SDMMC_DISABLE_IT __HAL_SD_SDIO_DISABLE_IT +#define __HAL_SD_SDMMC_GET_FLAG __HAL_SD_SDIO_GET_FLAG +#define __HAL_SD_SDMMC_CLEAR_FLAG __HAL_SD_SDIO_CLEAR_FLAG +#define __HAL_SD_SDMMC_GET_IT __HAL_SD_SDIO_GET_IT +#define __HAL_SD_SDMMC_CLEAR_IT __HAL_SD_SDIO_CLEAR_IT +#define SDMMC_STATIC_FLAGS SDIO_STATIC_FLAGS +#define SDMMC_CMD0TIMEOUT SDIO_CMD0TIMEOUT +#define SD_SDMMC_SEND_IF_COND SD_SDIO_SEND_IF_COND +/* alias CMSIS */ +#define SDMMC1_IRQn SDIO_IRQn +#define SDMMC1_IRQHandler SDIO_IRQHandler +#endif + +#if defined(STM32F7) || defined(STM32L4) +#define SD_SDIO_DISABLED SD_SDMMC_DISABLED +#define SD_SDIO_FUNCTION_BUSY SD_SDMMC_FUNCTION_BUSY +#define SD_SDIO_FUNCTION_FAILED SD_SDMMC_FUNCTION_FAILED +#define SD_SDIO_UNKNOWN_FUNCTION SD_SDMMC_UNKNOWN_FUNCTION +#define SD_CMD_SDIO_SEN_OP_COND SD_CMD_SDMMC_SEN_OP_COND +#define SD_CMD_SDIO_RW_DIRECT SD_CMD_SDMMC_RW_DIRECT +#define SD_CMD_SDIO_RW_EXTENDED SD_CMD_SDMMC_RW_EXTENDED +#define __HAL_SD_SDIO_ENABLE __HAL_SD_SDMMC_ENABLE +#define __HAL_SD_SDIO_DISABLE __HAL_SD_SDMMC_DISABLE +#define __HAL_SD_SDIO_DMA_ENABLE __HAL_SD_SDMMC_DMA_ENABLE +#define __HAL_SD_SDIO_DMA_DISABL __HAL_SD_SDMMC_DMA_DISABLE +#define __HAL_SD_SDIO_ENABLE_IT __HAL_SD_SDMMC_ENABLE_IT +#define __HAL_SD_SDIO_DISABLE_IT __HAL_SD_SDMMC_DISABLE_IT +#define __HAL_SD_SDIO_GET_FLAG __HAL_SD_SDMMC_GET_FLAG +#define __HAL_SD_SDIO_CLEAR_FLAG __HAL_SD_SDMMC_CLEAR_FLAG +#define __HAL_SD_SDIO_GET_IT __HAL_SD_SDMMC_GET_IT +#define __HAL_SD_SDIO_CLEAR_IT __HAL_SD_SDMMC_CLEAR_IT +#define SDIO_STATIC_FLAGS SDMMC_STATIC_FLAGS +#define SDIO_CMD0TIMEOUT SDMMC_CMD0TIMEOUT +#define SD_SDIO_SEND_IF_COND SD_SDMMC_SEND_IF_COND +/* alias CMSIS for compatibilities */ +#define SDIO_IRQn SDMMC1_IRQn +#define SDIO_IRQHandler SDMMC1_IRQHandler +#endif +/** + * @} + */ + +/** @defgroup HAL_SMARTCARD_Aliased_Macros HAL SMARTCARD Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __SMARTCARD_ENABLE_IT __HAL_SMARTCARD_ENABLE_IT +#define __SMARTCARD_DISABLE_IT __HAL_SMARTCARD_DISABLE_IT +#define __SMARTCARD_ENABLE __HAL_SMARTCARD_ENABLE +#define __SMARTCARD_DISABLE __HAL_SMARTCARD_DISABLE +#define __SMARTCARD_DMA_REQUEST_ENABLE __HAL_SMARTCARD_DMA_REQUEST_ENABLE +#define __SMARTCARD_DMA_REQUEST_DISABLE __HAL_SMARTCARD_DMA_REQUEST_DISABLE + +#define __HAL_SMARTCARD_GETCLOCKSOURCE SMARTCARD_GETCLOCKSOURCE +#define __SMARTCARD_GETCLOCKSOURCE SMARTCARD_GETCLOCKSOURCE + +#define IS_SMARTCARD_ONEBIT_SAMPLING IS_SMARTCARD_ONE_BIT_SAMPLE + +/** + * @} + */ + +/** @defgroup HAL_SMBUS_Aliased_Macros HAL SMBUS Aliased Macros maintained for legacy purpose + * @{ + */ +#define __HAL_SMBUS_RESET_CR1 SMBUS_RESET_CR1 +#define __HAL_SMBUS_RESET_CR2 SMBUS_RESET_CR2 +#define __HAL_SMBUS_GENERATE_START SMBUS_GENERATE_START +#define __HAL_SMBUS_GET_ADDR_MATCH SMBUS_GET_ADDR_MATCH +#define __HAL_SMBUS_GET_DIR SMBUS_GET_DIR +#define __HAL_SMBUS_GET_STOP_MODE SMBUS_GET_STOP_MODE +#define __HAL_SMBUS_GET_PEC_MODE SMBUS_GET_PEC_MODE +#define __HAL_SMBUS_GET_ALERT_ENABLED SMBUS_GET_ALERT_ENABLED +/** + * @} + */ + +/** @defgroup HAL_SPI_Aliased_Macros HAL SPI Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __HAL_SPI_1LINE_TX SPI_1LINE_TX +#define __HAL_SPI_1LINE_RX SPI_1LINE_RX +#define __HAL_SPI_RESET_CRC SPI_RESET_CRC + +/** + * @} + */ + +/** @defgroup HAL_UART_Aliased_Macros HAL UART Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __HAL_UART_GETCLOCKSOURCE UART_GETCLOCKSOURCE +#define __HAL_UART_MASK_COMPUTATION UART_MASK_COMPUTATION +#define __UART_GETCLOCKSOURCE UART_GETCLOCKSOURCE +#define __UART_MASK_COMPUTATION UART_MASK_COMPUTATION + +#define IS_UART_WAKEUPMETHODE IS_UART_WAKEUPMETHOD + +#define IS_UART_ONEBIT_SAMPLE IS_UART_ONE_BIT_SAMPLE +#define IS_UART_ONEBIT_SAMPLING IS_UART_ONE_BIT_SAMPLE + +/** + * @} + */ + + +/** @defgroup HAL_USART_Aliased_Macros HAL USART Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __USART_ENABLE_IT __HAL_USART_ENABLE_IT +#define __USART_DISABLE_IT __HAL_USART_DISABLE_IT +#define __USART_ENABLE __HAL_USART_ENABLE +#define __USART_DISABLE __HAL_USART_DISABLE + +#define __HAL_USART_GETCLOCKSOURCE USART_GETCLOCKSOURCE +#define __USART_GETCLOCKSOURCE USART_GETCLOCKSOURCE + +/** + * @} + */ + +/** @defgroup HAL_USB_Aliased_Macros HAL USB Aliased Macros maintained for legacy purpose + * @{ + */ +#define USB_EXTI_LINE_WAKEUP USB_WAKEUP_EXTI_LINE + +#define USB_FS_EXTI_TRIGGER_RISING_EDGE USB_OTG_FS_WAKEUP_EXTI_RISING_EDGE +#define USB_FS_EXTI_TRIGGER_FALLING_EDGE USB_OTG_FS_WAKEUP_EXTI_FALLING_EDGE +#define USB_FS_EXTI_TRIGGER_BOTH_EDGE USB_OTG_FS_WAKEUP_EXTI_RISING_FALLING_EDGE +#define USB_FS_EXTI_LINE_WAKEUP USB_OTG_FS_WAKEUP_EXTI_LINE + +#define USB_HS_EXTI_TRIGGER_RISING_EDGE USB_OTG_HS_WAKEUP_EXTI_RISING_EDGE +#define USB_HS_EXTI_TRIGGER_FALLING_EDGE USB_OTG_HS_WAKEUP_EXTI_FALLING_EDGE +#define USB_HS_EXTI_TRIGGER_BOTH_EDGE USB_OTG_HS_WAKEUP_EXTI_RISING_FALLING_EDGE +#define USB_HS_EXTI_LINE_WAKEUP USB_OTG_HS_WAKEUP_EXTI_LINE + +#define __HAL_USB_EXTI_ENABLE_IT __HAL_USB_WAKEUP_EXTI_ENABLE_IT +#define __HAL_USB_EXTI_DISABLE_IT __HAL_USB_WAKEUP_EXTI_DISABLE_IT +#define __HAL_USB_EXTI_GET_FLAG __HAL_USB_WAKEUP_EXTI_GET_FLAG +#define __HAL_USB_EXTI_CLEAR_FLAG __HAL_USB_WAKEUP_EXTI_CLEAR_FLAG +#define __HAL_USB_EXTI_SET_RISING_EDGE_TRIGGER __HAL_USB_WAKEUP_EXTI_ENABLE_RISING_EDGE +#define __HAL_USB_EXTI_SET_FALLING_EDGE_TRIGGER __HAL_USB_WAKEUP_EXTI_ENABLE_FALLING_EDGE +#define __HAL_USB_EXTI_SET_FALLINGRISING_TRIGGER __HAL_USB_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE + +#define __HAL_USB_FS_EXTI_ENABLE_IT __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_IT +#define __HAL_USB_FS_EXTI_DISABLE_IT __HAL_USB_OTG_FS_WAKEUP_EXTI_DISABLE_IT +#define __HAL_USB_FS_EXTI_GET_FLAG __HAL_USB_OTG_FS_WAKEUP_EXTI_GET_FLAG +#define __HAL_USB_FS_EXTI_CLEAR_FLAG __HAL_USB_OTG_FS_WAKEUP_EXTI_CLEAR_FLAG +#define __HAL_USB_FS_EXTI_SET_RISING_EGDE_TRIGGER __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_EDGE +#define __HAL_USB_FS_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_FALLING_EDGE +#define __HAL_USB_FS_EXTI_SET_FALLINGRISING_TRIGGER __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE +#define __HAL_USB_FS_EXTI_GENERATE_SWIT __HAL_USB_OTG_FS_WAKEUP_EXTI_GENERATE_SWIT + +#define __HAL_USB_HS_EXTI_ENABLE_IT __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_IT +#define __HAL_USB_HS_EXTI_DISABLE_IT __HAL_USB_OTG_HS_WAKEUP_EXTI_DISABLE_IT +#define __HAL_USB_HS_EXTI_GET_FLAG __HAL_USB_OTG_HS_WAKEUP_EXTI_GET_FLAG +#define __HAL_USB_HS_EXTI_CLEAR_FLAG __HAL_USB_OTG_HS_WAKEUP_EXTI_CLEAR_FLAG +#define __HAL_USB_HS_EXTI_SET_RISING_EGDE_TRIGGER __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_RISING_EDGE +#define __HAL_USB_HS_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_FALLING_EDGE +#define __HAL_USB_HS_EXTI_SET_FALLINGRISING_TRIGGER __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE +#define __HAL_USB_HS_EXTI_GENERATE_SWIT __HAL_USB_OTG_HS_WAKEUP_EXTI_GENERATE_SWIT + +#define HAL_PCD_ActiveRemoteWakeup HAL_PCD_ActivateRemoteWakeup +#define HAL_PCD_DeActiveRemoteWakeup HAL_PCD_DeActivateRemoteWakeup + +#define HAL_PCD_SetTxFiFo HAL_PCDEx_SetTxFiFo +#define HAL_PCD_SetRxFiFo HAL_PCDEx_SetRxFiFo +/** + * @} + */ + +/** @defgroup HAL_TIM_Aliased_Macros HAL TIM Aliased Macros maintained for legacy purpose + * @{ + */ +#define __HAL_TIM_SetICPrescalerValue TIM_SET_ICPRESCALERVALUE +#define __HAL_TIM_ResetICPrescalerValue TIM_RESET_ICPRESCALERVALUE + +#define TIM_GET_ITSTATUS __HAL_TIM_GET_IT_SOURCE +#define TIM_GET_CLEAR_IT __HAL_TIM_CLEAR_IT + +#define __HAL_TIM_GET_ITSTATUS __HAL_TIM_GET_IT_SOURCE + +#define __HAL_TIM_DIRECTION_STATUS __HAL_TIM_IS_TIM_COUNTING_DOWN +#define __HAL_TIM_PRESCALER __HAL_TIM_SET_PRESCALER +#define __HAL_TIM_SetCounter __HAL_TIM_SET_COUNTER +#define __HAL_TIM_GetCounter __HAL_TIM_GET_COUNTER +#define __HAL_TIM_SetAutoreload __HAL_TIM_SET_AUTORELOAD +#define __HAL_TIM_GetAutoreload __HAL_TIM_GET_AUTORELOAD +#define __HAL_TIM_SetClockDivision __HAL_TIM_SET_CLOCKDIVISION +#define __HAL_TIM_GetClockDivision __HAL_TIM_GET_CLOCKDIVISION +#define __HAL_TIM_SetICPrescaler __HAL_TIM_SET_ICPRESCALER +#define __HAL_TIM_GetICPrescaler __HAL_TIM_GET_ICPRESCALER +#define __HAL_TIM_SetCompare __HAL_TIM_SET_COMPARE +#define __HAL_TIM_GetCompare __HAL_TIM_GET_COMPARE + +#define TIM_BREAKINPUTSOURCE_DFSDM TIM_BREAKINPUTSOURCE_DFSDM1 +/** + * @} + */ + +/** @defgroup HAL_ETH_Aliased_Macros HAL ETH Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __HAL_ETH_EXTI_ENABLE_IT __HAL_ETH_WAKEUP_EXTI_ENABLE_IT +#define __HAL_ETH_EXTI_DISABLE_IT __HAL_ETH_WAKEUP_EXTI_DISABLE_IT +#define __HAL_ETH_EXTI_GET_FLAG __HAL_ETH_WAKEUP_EXTI_GET_FLAG +#define __HAL_ETH_EXTI_CLEAR_FLAG __HAL_ETH_WAKEUP_EXTI_CLEAR_FLAG +#define __HAL_ETH_EXTI_SET_RISING_EGDE_TRIGGER __HAL_ETH_WAKEUP_EXTI_ENABLE_RISING_EDGE_TRIGGER +#define __HAL_ETH_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_ETH_WAKEUP_EXTI_ENABLE_FALLING_EDGE_TRIGGER +#define __HAL_ETH_EXTI_SET_FALLINGRISING_TRIGGER __HAL_ETH_WAKEUP_EXTI_ENABLE_FALLINGRISING_TRIGGER + +#define ETH_PROMISCIOUSMODE_ENABLE ETH_PROMISCUOUS_MODE_ENABLE +#define ETH_PROMISCIOUSMODE_DISABLE ETH_PROMISCUOUS_MODE_DISABLE +#define IS_ETH_PROMISCIOUS_MODE IS_ETH_PROMISCUOUS_MODE +/** + * @} + */ + +/** @defgroup HAL_LTDC_Aliased_Macros HAL LTDC Aliased Macros maintained for legacy purpose + * @{ + */ +#define __HAL_LTDC_LAYER LTDC_LAYER +/** + * @} + */ + +/** @defgroup HAL_SAI_Aliased_Macros HAL SAI Aliased Macros maintained for legacy purpose + * @{ + */ +#define SAI_OUTPUTDRIVE_DISABLED SAI_OUTPUTDRIVE_DISABLE +#define SAI_OUTPUTDRIVE_ENABLED SAI_OUTPUTDRIVE_ENABLE +#define SAI_MASTERDIVIDER_ENABLED SAI_MASTERDIVIDER_ENABLE +#define SAI_MASTERDIVIDER_DISABLED SAI_MASTERDIVIDER_DISABLE +#define SAI_STREOMODE SAI_STEREOMODE +#define SAI_FIFOStatus_Empty SAI_FIFOSTATUS_EMPTY +#define SAI_FIFOStatus_Less1QuarterFull SAI_FIFOSTATUS_LESS1QUARTERFULL +#define SAI_FIFOStatus_1QuarterFull SAI_FIFOSTATUS_1QUARTERFULL +#define SAI_FIFOStatus_HalfFull SAI_FIFOSTATUS_HALFFULL +#define SAI_FIFOStatus_3QuartersFull SAI_FIFOSTATUS_3QUARTERFULL +#define SAI_FIFOStatus_Full SAI_FIFOSTATUS_FULL +#define IS_SAI_BLOCK_MONO_STREO_MODE IS_SAI_BLOCK_MONO_STEREO_MODE +#define SAI_SYNCHRONOUS_EXT SAI_SYNCHRONOUS_EXT_SAI1 +#define SAI_SYNCEXT_IN_ENABLE SAI_SYNCEXT_OUTBLOCKA_ENABLE +/** + * @} + */ + + +/** @defgroup HAL_PPP_Aliased_Macros HAL PPP Aliased Macros maintained for legacy purpose + * @{ + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* ___STM32_HAL_LEGACY */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32_assert_template.h b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32_assert_template.h new file mode 100755 index 0000000..b4ba6a4 --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32_assert_template.h @@ -0,0 +1,75 @@ +/** + ****************************************************************************** + * @file stm32_assert.h + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief STM32 assert template file. + * This file should be copied to the application folder and renamed + * to stm32_assert.h. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32_ASSERT_H +#define __STM32_ASSERT_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/* Includes ------------------------------------------------------------------*/ +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT +/** + * @brief The assert_param macro is used for function's parameters check. + * @param expr: If expr is false, it calls assert_failed function + * which reports the name of the source file and the source + * line number of the call that failed. + * If expr is true, it returns no value. + * @retval None + */ + #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ + void assert_failed(uint8_t* file, uint32_t line); +#else + #define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32_ASSERT_H */ + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal.h b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal.h new file mode 100755 index 0000000..f777979 --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal.h @@ -0,0 +1,964 @@ +/** + ****************************************************************************** + * @file stm32l1xx_hal.h + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief This file contains all the functions prototypes for the HAL + * module driver. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L1xx_HAL_H +#define __STM32L1xx_HAL_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_hal_conf.h" + +/** @addtogroup STM32L1xx_HAL_Driver + * @{ + */ + +/** @addtogroup HAL + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup HAL_Exported_Constants HAL Exported Constants + * @{ + */ + +/** @defgroup SYSCFG_Constants SYSCFG: SYStem ConFiG + * @{ + */ + +/** @defgroup SYSCFG_BootMode Boot Mode + * @{ + */ + +#define SYSCFG_BOOT_MAINFLASH (0x00000000U) +#define SYSCFG_BOOT_SYSTEMFLASH ((uint32_t)SYSCFG_MEMRMP_BOOT_MODE_0) +#if defined(FSMC_R_BASE) +#define SYSCFG_BOOT_FSMC ((uint32_t)SYSCFG_MEMRMP_BOOT_MODE_1) +#endif /* FSMC_R_BASE */ +#define SYSCFG_BOOT_SRAM ((uint32_t)SYSCFG_MEMRMP_BOOT_MODE) + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup RI_Constants RI: Routing Interface + * @{ + */ + +/** @defgroup RI_InputCapture Input Capture + * @{ + */ + +#define RI_INPUTCAPTURE_IC1 RI_ICR_IC1 /*!< Input Capture 1 */ +#define RI_INPUTCAPTURE_IC2 RI_ICR_IC2 /*!< Input Capture 2 */ +#define RI_INPUTCAPTURE_IC3 RI_ICR_IC3 /*!< Input Capture 3 */ +#define RI_INPUTCAPTURE_IC4 RI_ICR_IC4 /*!< Input Capture 4 */ + +/** + * @} + */ + +/** @defgroup TIM_Select TIM Select + * @{ + */ + +#define TIM_SELECT_NONE (0x00000000U) /*!< None selected */ +#define TIM_SELECT_TIM2 ((uint32_t)RI_ICR_TIM_0) /*!< Timer 2 selected */ +#define TIM_SELECT_TIM3 ((uint32_t)RI_ICR_TIM_1) /*!< Timer 3 selected */ +#define TIM_SELECT_TIM4 ((uint32_t)RI_ICR_TIM) /*!< Timer 4 selected */ + +#define IS_RI_TIM(__TIM__) (((__TIM__) == TIM_SELECT_NONE) || \ + ((__TIM__) == TIM_SELECT_TIM2) || \ + ((__TIM__) == TIM_SELECT_TIM3) || \ + ((__TIM__) == TIM_SELECT_TIM4)) + +/** + * @} + */ + +/** @defgroup RI_InputCaptureRouting Input Capture Routing + * @{ + */ + /* TIMx_IC1 TIMx_IC2 TIMx_IC3 TIMx_IC4 */ +#define RI_INPUTCAPTUREROUTING_0 (0x00000000U) /* PA0 PA1 PA2 PA3 */ +#define RI_INPUTCAPTUREROUTING_1 (0x00000001U) /* PA4 PA5 PA6 PA7 */ +#define RI_INPUTCAPTUREROUTING_2 (0x00000002U) /* PA8 PA9 PA10 PA11 */ +#define RI_INPUTCAPTUREROUTING_3 (0x00000003U) /* PA12 PA13 PA14 PA15 */ +#define RI_INPUTCAPTUREROUTING_4 (0x00000004U) /* PC0 PC1 PC2 PC3 */ +#define RI_INPUTCAPTUREROUTING_5 (0x00000005U) /* PC4 PC5 PC6 PC7 */ +#define RI_INPUTCAPTUREROUTING_6 (0x00000006U) /* PC8 PC9 PC10 PC11 */ +#define RI_INPUTCAPTUREROUTING_7 (0x00000007U) /* PC12 PC13 PC14 PC15 */ +#define RI_INPUTCAPTUREROUTING_8 (0x00000008U) /* PD0 PD1 PD2 PD3 */ +#define RI_INPUTCAPTUREROUTING_9 (0x00000009U) /* PD4 PD5 PD6 PD7 */ +#define RI_INPUTCAPTUREROUTING_10 (0x0000000AU) /* PD8 PD9 PD10 PD11 */ +#define RI_INPUTCAPTUREROUTING_11 (0x0000000BU) /* PD12 PD13 PD14 PD15 */ +#define RI_INPUTCAPTUREROUTING_12 (0x0000000CU) /* PE0 PE1 PE2 PE3 */ +#define RI_INPUTCAPTUREROUTING_13 (0x0000000DU) /* PE4 PE5 PE6 PE7 */ +#define RI_INPUTCAPTUREROUTING_14 (0x0000000EU) /* PE8 PE9 PE10 PE11 */ +#define RI_INPUTCAPTUREROUTING_15 (0x0000000FU) /* PE12 PE13 PE14 PE15 */ + +#define IS_RI_INPUTCAPTURE_ROUTING(__ROUTING__) (((__ROUTING__) == RI_INPUTCAPTUREROUTING_0) || \ + ((__ROUTING__) == RI_INPUTCAPTUREROUTING_1) || \ + ((__ROUTING__) == RI_INPUTCAPTUREROUTING_2) || \ + ((__ROUTING__) == RI_INPUTCAPTUREROUTING_3) || \ + ((__ROUTING__) == RI_INPUTCAPTUREROUTING_4) || \ + ((__ROUTING__) == RI_INPUTCAPTUREROUTING_5) || \ + ((__ROUTING__) == RI_INPUTCAPTUREROUTING_6) || \ + ((__ROUTING__) == RI_INPUTCAPTUREROUTING_7) || \ + ((__ROUTING__) == RI_INPUTCAPTUREROUTING_8) || \ + ((__ROUTING__) == RI_INPUTCAPTUREROUTING_9) || \ + ((__ROUTING__) == RI_INPUTCAPTUREROUTING_10) || \ + ((__ROUTING__) == RI_INPUTCAPTUREROUTING_11) || \ + ((__ROUTING__) == RI_INPUTCAPTUREROUTING_12) || \ + ((__ROUTING__) == RI_INPUTCAPTUREROUTING_13) || \ + ((__ROUTING__) == RI_INPUTCAPTUREROUTING_14) || \ + ((__ROUTING__) == RI_INPUTCAPTUREROUTING_15)) + +/** + * @} + */ + +/** @defgroup RI_IOSwitch IO Switch + * @{ + */ +#define RI_ASCR1_REGISTER (0x80000000U) +/* ASCR1 I/O switch: bit 31 is set to '1' to indicate that the mask is in ASCR1 register */ +#define RI_IOSWITCH_CH0 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_0) +#define RI_IOSWITCH_CH1 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_1) +#define RI_IOSWITCH_CH2 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_2) +#define RI_IOSWITCH_CH3 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_3) +#define RI_IOSWITCH_CH4 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_4) +#define RI_IOSWITCH_CH5 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_5) +#define RI_IOSWITCH_CH6 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_6) +#define RI_IOSWITCH_CH7 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_7) +#define RI_IOSWITCH_CH8 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_8) +#define RI_IOSWITCH_CH9 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_9) +#define RI_IOSWITCH_CH10 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_10) +#define RI_IOSWITCH_CH11 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_11) +#define RI_IOSWITCH_CH12 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_12) +#define RI_IOSWITCH_CH13 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_13) +#define RI_IOSWITCH_CH14 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_14) +#define RI_IOSWITCH_CH15 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_15) +#define RI_IOSWITCH_CH18 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_18) +#define RI_IOSWITCH_CH19 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_19) +#define RI_IOSWITCH_CH20 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_20) +#define RI_IOSWITCH_CH21 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_21) +#define RI_IOSWITCH_CH22 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_22) +#define RI_IOSWITCH_CH23 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_23) +#define RI_IOSWITCH_CH24 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_24) +#define RI_IOSWITCH_CH25 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_25) +#define RI_IOSWITCH_VCOMP ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_VCOMP) /* VCOMP (ADC channel 26) is an internal switch used to connect selected channel to COMP1 non inverting input */ +#if defined (RI_ASCR2_CH1b) /* STM32L1 devices category Cat.4 and Cat.5 */ +#define RI_IOSWITCH_CH27 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_27) +#define RI_IOSWITCH_CH28 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_28) +#define RI_IOSWITCH_CH29 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_29) +#define RI_IOSWITCH_CH30 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_30) +#define RI_IOSWITCH_CH31 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_31) +#endif /* RI_ASCR2_CH1b */ + +/* ASCR2 IO switch: bit 31 is set to '0' to indicate that the mask is in ASCR2 register */ +#define RI_IOSWITCH_GR10_1 ((uint32_t)RI_ASCR2_GR10_1) +#define RI_IOSWITCH_GR10_2 ((uint32_t)RI_ASCR2_GR10_2) +#define RI_IOSWITCH_GR10_3 ((uint32_t)RI_ASCR2_GR10_3) +#define RI_IOSWITCH_GR10_4 ((uint32_t)RI_ASCR2_GR10_4) +#define RI_IOSWITCH_GR6_1 ((uint32_t)RI_ASCR2_GR6_1) +#define RI_IOSWITCH_GR6_2 ((uint32_t)RI_ASCR2_GR6_2) +#define RI_IOSWITCH_GR5_1 ((uint32_t)RI_ASCR2_GR5_1) +#define RI_IOSWITCH_GR5_2 ((uint32_t)RI_ASCR2_GR5_2) +#define RI_IOSWITCH_GR5_3 ((uint32_t)RI_ASCR2_GR5_3) +#define RI_IOSWITCH_GR4_1 ((uint32_t)RI_ASCR2_GR4_1) +#define RI_IOSWITCH_GR4_2 ((uint32_t)RI_ASCR2_GR4_2) +#define RI_IOSWITCH_GR4_3 ((uint32_t)RI_ASCR2_GR4_3) +#if defined (RI_ASCR2_CH0b) /* STM32L1 devices category Cat.3, Cat.4 and Cat.5 */ +#define RI_IOSWITCH_CH0b ((uint32_t)RI_ASCR2_CH0b) +#if defined (RI_ASCR2_CH1b) /* STM32L1 devices category Cat.4 and Cat.5 */ +#define RI_IOSWITCH_CH1b ((uint32_t)RI_ASCR2_CH1b) +#define RI_IOSWITCH_CH2b ((uint32_t)RI_ASCR2_CH2b) +#define RI_IOSWITCH_CH3b ((uint32_t)RI_ASCR2_CH3b) +#define RI_IOSWITCH_CH6b ((uint32_t)RI_ASCR2_CH6b) +#define RI_IOSWITCH_CH7b ((uint32_t)RI_ASCR2_CH7b) +#define RI_IOSWITCH_CH8b ((uint32_t)RI_ASCR2_CH8b) +#define RI_IOSWITCH_CH9b ((uint32_t)RI_ASCR2_CH9b) +#define RI_IOSWITCH_CH10b ((uint32_t)RI_ASCR2_CH10b) +#define RI_IOSWITCH_CH11b ((uint32_t)RI_ASCR2_CH11b) +#define RI_IOSWITCH_CH12b ((uint32_t)RI_ASCR2_CH12b) +#endif /* RI_ASCR2_CH1b */ +#define RI_IOSWITCH_GR6_3 ((uint32_t)RI_ASCR2_GR6_3) +#define RI_IOSWITCH_GR6_4 ((uint32_t)RI_ASCR2_GR6_4) +#endif /* RI_ASCR2_CH0b */ + + +#if defined (RI_ASCR2_CH1b) /* STM32L1 devices category Cat.4 and Cat.5 */ + +#define IS_RI_IOSWITCH(__IOSWITCH__) (((__IOSWITCH__) == RI_IOSWITCH_CH0) || ((__IOSWITCH__) == RI_IOSWITCH_CH1) || \ + ((__IOSWITCH__) == RI_IOSWITCH_CH2) || ((__IOSWITCH__) == RI_IOSWITCH_CH3) || \ + ((__IOSWITCH__) == RI_IOSWITCH_CH4) || ((__IOSWITCH__) == RI_IOSWITCH_CH5) || \ + ((__IOSWITCH__) == RI_IOSWITCH_CH6) || ((__IOSWITCH__) == RI_IOSWITCH_CH7) || \ + ((__IOSWITCH__) == RI_IOSWITCH_CH8) || ((__IOSWITCH__) == RI_IOSWITCH_CH9) || \ + ((__IOSWITCH__) == RI_IOSWITCH_CH10) || ((__IOSWITCH__) == RI_IOSWITCH_CH11) || \ + ((__IOSWITCH__) == RI_IOSWITCH_CH12) || ((__IOSWITCH__) == RI_IOSWITCH_CH13) || \ + ((__IOSWITCH__) == RI_IOSWITCH_CH14) || ((__IOSWITCH__) == RI_IOSWITCH_CH15) || \ + ((__IOSWITCH__) == RI_IOSWITCH_CH18) || ((__IOSWITCH__) == RI_IOSWITCH_CH19) || \ + ((__IOSWITCH__) == RI_IOSWITCH_CH20) || ((__IOSWITCH__) == RI_IOSWITCH_CH21) || \ + ((__IOSWITCH__) == RI_IOSWITCH_CH22) || ((__IOSWITCH__) == RI_IOSWITCH_CH23) || \ + ((__IOSWITCH__) == RI_IOSWITCH_CH24) || ((__IOSWITCH__) == RI_IOSWITCH_CH25) || \ + ((__IOSWITCH__) == RI_IOSWITCH_VCOMP) || ((__IOSWITCH__) == RI_IOSWITCH_CH27) || \ + ((__IOSWITCH__) == RI_IOSWITCH_CH28) || ((__IOSWITCH__) == RI_IOSWITCH_CH29) || \ + ((__IOSWITCH__) == RI_IOSWITCH_CH30) || ((__IOSWITCH__) == RI_IOSWITCH_CH31) || \ + ((__IOSWITCH__) == RI_IOSWITCH_GR10_1) || ((__IOSWITCH__) == RI_IOSWITCH_GR10_2) || \ + ((__IOSWITCH__) == RI_IOSWITCH_GR10_3) || ((__IOSWITCH__) == RI_IOSWITCH_GR10_4) || \ + ((__IOSWITCH__) == RI_IOSWITCH_GR6_1) || ((__IOSWITCH__) == RI_IOSWITCH_GR6_2) || \ + ((__IOSWITCH__) == RI_IOSWITCH_GR6_3) || ((__IOSWITCH__) == RI_IOSWITCH_GR6_4) || \ + ((__IOSWITCH__) == RI_IOSWITCH_GR5_1) || ((__IOSWITCH__) == RI_IOSWITCH_GR5_2) || \ + ((__IOSWITCH__) == RI_IOSWITCH_GR5_3) || ((__IOSWITCH__) == RI_IOSWITCH_GR4_1) || \ + ((__IOSWITCH__) == RI_IOSWITCH_GR4_2) || ((__IOSWITCH__) == RI_IOSWITCH_GR4_3) || \ + ((__IOSWITCH__) == RI_IOSWITCH_CH0b) || ((__IOSWITCH__) == RI_IOSWITCH_CH1b) || \ + ((__IOSWITCH__) == RI_IOSWITCH_CH2b) || ((__IOSWITCH__) == RI_IOSWITCH_CH3b) || \ + ((__IOSWITCH__) == RI_IOSWITCH_CH6b) || ((__IOSWITCH__) == RI_IOSWITCH_CH7b) || \ + ((__IOSWITCH__) == RI_IOSWITCH_CH8b) || ((__IOSWITCH__) == RI_IOSWITCH_CH9b) || \ + ((__IOSWITCH__) == RI_IOSWITCH_CH10b) || ((__IOSWITCH__) == RI_IOSWITCH_CH11b) || \ + ((__IOSWITCH__) == RI_IOSWITCH_CH12b)) + +#else /* !RI_ASCR2_CH1b */ + +#if defined (RI_ASCR2_CH0b) /* STM32L1 devices category Cat.3 */ + +#define IS_RI_IOSWITCH(__IOSWITCH__) (((__IOSWITCH__) == RI_IOSWITCH_CH0) || ((__IOSWITCH__) == RI_IOSWITCH_CH1) || \ + ((__IOSWITCH__) == RI_IOSWITCH_CH2) || ((__IOSWITCH__) == RI_IOSWITCH_CH3) || \ + ((__IOSWITCH__) == RI_IOSWITCH_CH4) || ((__IOSWITCH__) == RI_IOSWITCH_CH5) || \ + ((__IOSWITCH__) == RI_IOSWITCH_CH6) || ((__IOSWITCH__) == RI_IOSWITCH_CH7) || \ + ((__IOSWITCH__) == RI_IOSWITCH_CH8) || ((__IOSWITCH__) == RI_IOSWITCH_CH9) || \ + ((__IOSWITCH__) == RI_IOSWITCH_CH10) || ((__IOSWITCH__) == RI_IOSWITCH_CH11) || \ + ((__IOSWITCH__) == RI_IOSWITCH_CH12) || ((__IOSWITCH__) == RI_IOSWITCH_CH13) || \ + ((__IOSWITCH__) == RI_IOSWITCH_CH14) || ((__IOSWITCH__) == RI_IOSWITCH_CH15) || \ + ((__IOSWITCH__) == RI_IOSWITCH_CH18) || ((__IOSWITCH__) == RI_IOSWITCH_CH19) || \ + ((__IOSWITCH__) == RI_IOSWITCH_CH20) || ((__IOSWITCH__) == RI_IOSWITCH_CH21) || \ + ((__IOSWITCH__) == RI_IOSWITCH_CH22) || ((__IOSWITCH__) == RI_IOSWITCH_CH23) || \ + ((__IOSWITCH__) == RI_IOSWITCH_CH24) || ((__IOSWITCH__) == RI_IOSWITCH_CH25) || \ + ((__IOSWITCH__) == RI_IOSWITCH_VCOMP) || ((__IOSWITCH__) == RI_IOSWITCH_GR10_1) || \ + ((__IOSWITCH__) == RI_IOSWITCH_GR10_2) || ((__IOSWITCH__) == RI_IOSWITCH_GR10_3) || \ + ((__IOSWITCH__) == RI_IOSWITCH_GR10_4) || ((__IOSWITCH__) == RI_IOSWITCH_GR6_1) || \ + ((__IOSWITCH__) == RI_IOSWITCH_GR6_2) || ((__IOSWITCH__) == RI_IOSWITCH_GR5_1) || \ + ((__IOSWITCH__) == RI_IOSWITCH_GR5_2) || ((__IOSWITCH__) == RI_IOSWITCH_GR5_3) || \ + ((__IOSWITCH__) == RI_IOSWITCH_GR4_1) || ((__IOSWITCH__) == RI_IOSWITCH_GR4_2) || \ + ((__IOSWITCH__) == RI_IOSWITCH_GR4_3) || ((__IOSWITCH__) == RI_IOSWITCH_CH0b)) + +#else /* !RI_ASCR2_CH0b */ /* STM32L1 devices category Cat.1 and Cat.2 */ + +#define IS_RI_IOSWITCH(__IOSWITCH__) (((__IOSWITCH__) == RI_IOSWITCH_CH0) || ((__IOSWITCH__) == RI_IOSWITCH_CH1) || \ + ((__IOSWITCH__) == RI_IOSWITCH_CH2) || ((__IOSWITCH__) == RI_IOSWITCH_CH3) || \ + ((__IOSWITCH__) == RI_IOSWITCH_CH4) || ((__IOSWITCH__) == RI_IOSWITCH_CH5) || \ + ((__IOSWITCH__) == RI_IOSWITCH_CH6) || ((__IOSWITCH__) == RI_IOSWITCH_CH7) || \ + ((__IOSWITCH__) == RI_IOSWITCH_CH8) || ((__IOSWITCH__) == RI_IOSWITCH_CH9) || \ + ((__IOSWITCH__) == RI_IOSWITCH_CH10) || ((__IOSWITCH__) == RI_IOSWITCH_CH11) || \ + ((__IOSWITCH__) == RI_IOSWITCH_CH12) || ((__IOSWITCH__) == RI_IOSWITCH_CH13) || \ + ((__IOSWITCH__) == RI_IOSWITCH_CH14) || ((__IOSWITCH__) == RI_IOSWITCH_CH15) || \ + ((__IOSWITCH__) == RI_IOSWITCH_CH18) || ((__IOSWITCH__) == RI_IOSWITCH_CH19) || \ + ((__IOSWITCH__) == RI_IOSWITCH_CH20) || ((__IOSWITCH__) == RI_IOSWITCH_CH21) || \ + ((__IOSWITCH__) == RI_IOSWITCH_CH22) || ((__IOSWITCH__) == RI_IOSWITCH_CH23) || \ + ((__IOSWITCH__) == RI_IOSWITCH_CH24) || ((__IOSWITCH__) == RI_IOSWITCH_CH25) || \ + ((__IOSWITCH__) == RI_IOSWITCH_VCOMP) || ((__IOSWITCH__) == RI_IOSWITCH_GR10_1) || \ + ((__IOSWITCH__) == RI_IOSWITCH_GR10_2) || ((__IOSWITCH__) == RI_IOSWITCH_GR10_3) || \ + ((__IOSWITCH__) == RI_IOSWITCH_GR10_4) || ((__IOSWITCH__) == RI_IOSWITCH_GR6_1) || \ + ((__IOSWITCH__) == RI_IOSWITCH_GR6_2) || ((__IOSWITCH__) == RI_IOSWITCH_GR5_1) || \ + ((__IOSWITCH__) == RI_IOSWITCH_GR5_2) || ((__IOSWITCH__) == RI_IOSWITCH_GR5_3) || \ + ((__IOSWITCH__) == RI_IOSWITCH_GR4_1) || ((__IOSWITCH__) == RI_IOSWITCH_GR4_2) || \ + ((__IOSWITCH__) == RI_IOSWITCH_GR4_3)) + +#endif /* RI_ASCR2_CH0b */ +#endif /* RI_ASCR2_CH1b */ + +/** + * @} + */ + +/** @defgroup RI_Pin PIN define + * @{ + */ +#define RI_PIN_0 ((uint16_t)0x0001) /*!< Pin 0 selected */ +#define RI_PIN_1 ((uint16_t)0x0002) /*!< Pin 1 selected */ +#define RI_PIN_2 ((uint16_t)0x0004) /*!< Pin 2 selected */ +#define RI_PIN_3 ((uint16_t)0x0008) /*!< Pin 3 selected */ +#define RI_PIN_4 ((uint16_t)0x0010) /*!< Pin 4 selected */ +#define RI_PIN_5 ((uint16_t)0x0020) /*!< Pin 5 selected */ +#define RI_PIN_6 ((uint16_t)0x0040) /*!< Pin 6 selected */ +#define RI_PIN_7 ((uint16_t)0x0080) /*!< Pin 7 selected */ +#define RI_PIN_8 ((uint16_t)0x0100) /*!< Pin 8 selected */ +#define RI_PIN_9 ((uint16_t)0x0200) /*!< Pin 9 selected */ +#define RI_PIN_10 ((uint16_t)0x0400) /*!< Pin 10 selected */ +#define RI_PIN_11 ((uint16_t)0x0800) /*!< Pin 11 selected */ +#define RI_PIN_12 ((uint16_t)0x1000) /*!< Pin 12 selected */ +#define RI_PIN_13 ((uint16_t)0x2000) /*!< Pin 13 selected */ +#define RI_PIN_14 ((uint16_t)0x4000) /*!< Pin 14 selected */ +#define RI_PIN_15 ((uint16_t)0x8000) /*!< Pin 15 selected */ +#define RI_PIN_ALL ((uint16_t)0xFFFF) /*!< All pins selected */ + +#define IS_RI_PIN(__PIN__) ((__PIN__) != (uint16_t)0x00) + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ + +/** @defgroup HAL_Exported_Macros HAL Exported Macros + * @{ + */ + +/** @defgroup DBGMCU_Macros DBGMCU: Debug MCU + * @{ + */ + +/** @defgroup DBGMCU_Freeze_Unfreeze Freeze Unfreeze Peripherals in Debug mode + * @brief Freeze/Unfreeze Peripherals in Debug mode + * @{ + */ + +/** + * @brief TIM2 Peripherals Debug mode + */ +#if defined (DBGMCU_APB1_FZ_DBG_TIM2_STOP) +#define __HAL_DBGMCU_FREEZE_TIM2() SET_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_TIM2_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM2() CLEAR_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_TIM2_STOP) +#endif + +/** + * @brief TIM3 Peripherals Debug mode + */ +#if defined (DBGMCU_APB1_FZ_DBG_TIM3_STOP) +#define __HAL_DBGMCU_FREEZE_TIM3() SET_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_TIM3_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM3() CLEAR_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_TIM3_STOP) +#endif + +/** + * @brief TIM4 Peripherals Debug mode + */ +#if defined (DBGMCU_APB1_FZ_DBG_TIM4_STOP) +#define __HAL_DBGMCU_FREEZE_TIM4() SET_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_TIM4_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM4() CLEAR_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_TIM4_STOP) +#endif + +/** + * @brief TIM5 Peripherals Debug mode + */ +#if defined (DBGMCU_APB1_FZ_DBG_TIM5_STOP) +#define __HAL_DBGMCU_FREEZE_TIM5() SET_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_TIM5_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM5() CLEAR_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_TIM5_STOP) +#endif + +/** + * @brief TIM6 Peripherals Debug mode + */ +#if defined (DBGMCU_APB1_FZ_DBG_TIM6_STOP) +#define __HAL_DBGMCU_FREEZE_TIM6() SET_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_TIM6_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM6() CLEAR_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_TIM6_STOP) +#endif + +/** + * @brief TIM7 Peripherals Debug mode + */ +#if defined (DBGMCU_APB1_FZ_DBG_TIM7_STOP) +#define __HAL_DBGMCU_FREEZE_TIM7() SET_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_TIM7_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM7() CLEAR_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_TIM7_STOP) +#endif + +/** + * @brief RTC Peripherals Debug mode + */ +#if defined (DBGMCU_APB1_FZ_DBG_RTC_STOP) +#define __HAL_DBGMCU_FREEZE_RTC() SET_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_RTC_STOP) +#define __HAL_DBGMCU_UNFREEZE_RTC() CLEAR_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_RTC_STOP) +#endif + +/** + * @brief WWDG Peripherals Debug mode + */ +#if defined (DBGMCU_APB1_FZ_DBG_WWDG_STOP) +#define __HAL_DBGMCU_FREEZE_WWDG() SET_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_WWDG_STOP) +#define __HAL_DBGMCU_UNFREEZE_WWDG() CLEAR_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_WWDG_STOP) +#endif + +/** + * @brief IWDG Peripherals Debug mode + */ +#if defined (DBGMCU_APB1_FZ_DBG_IWDG_STOP) +#define __HAL_DBGMCU_FREEZE_IWDG() SET_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_IWDG_STOP) +#define __HAL_DBGMCU_UNFREEZE_IWDG() CLEAR_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_IWDG_STOP) +#endif + +/** + * @brief I2C1 Peripherals Debug mode + */ +#if defined (DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT) +#define __HAL_DBGMCU_FREEZE_I2C1_TIMEOUT() SET_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT) +#define __HAL_DBGMCU_UNFREEZE_I2C1_TIMEOUT() CLEAR_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT) +#endif + +/** + * @brief I2C2 Peripherals Debug mode + */ +#if defined (DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT) +#define __HAL_DBGMCU_FREEZE_I2C2_TIMEOUT() SET_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT) +#define __HAL_DBGMCU_UNFREEZE_I2C2_TIMEOUT() CLEAR_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT) +#endif + +/** + * @brief TIM9 Peripherals Debug mode + */ +#if defined (DBGMCU_APB2_FZ_DBG_TIM9_STOP) +#define __HAL_DBGMCU_FREEZE_TIM9() SET_BIT(DBGMCU->APB2FZ, DBGMCU_APB2_FZ_DBG_TIM9_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM9() CLEAR_BIT(DBGMCU->APB2FZ, DBGMCU_APB2_FZ_DBG_TIM9_STOP) +#endif + +/** + * @brief TIM10 Peripherals Debug mode + */ +#if defined (DBGMCU_APB2_FZ_DBG_TIM10_STOP) +#define __HAL_DBGMCU_FREEZE_TIM10() SET_BIT(DBGMCU->APB2FZ, DBGMCU_APB2_FZ_DBG_TIM10_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM10() CLEAR_BIT(DBGMCU->APB2FZ, DBGMCU_APB2_FZ_DBG_TIM10_STOP) +#endif + +/** + * @brief TIM11 Peripherals Debug mode + */ +#if defined (DBGMCU_APB2_FZ_DBG_TIM11_STOP) +#define __HAL_DBGMCU_FREEZE_TIM11() SET_BIT(DBGMCU->APB2FZ, DBGMCU_APB2_FZ_DBG_TIM11_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM11() CLEAR_BIT(DBGMCU->APB2FZ, DBGMCU_APB2_FZ_DBG_TIM11_STOP) +#endif + + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup SYSCFG_Macros SYSCFG: SYStem ConFiG + * @{ + */ + +/** @defgroup SYSCFG_VrefInt VREFINT configuration + * @{ + */ + +/** + * @brief Enables or disables the output of internal reference voltage + * (VREFINT) on I/O pin. + * The VREFINT output can be routed to any I/O in group 3: + * - For Cat.1 and Cat.2 devices: CH8 (PB0) or CH9 (PB1). + * - For Cat.3 devices: CH8 (PB0), CH9 (PB1) or CH0b (PB2). + * - For Cat.4 and Cat.5 devices: CH8 (PB0), CH9 (PB1), CH0b (PB2), + * CH1b (PF11) or CH2b (PF12). + * Note: Comparator peripheral clock must be preliminarility enabled, + * either in COMP user function "HAL_COMP_MspInit()" (should be + * done if comparators are used) or by direct clock enable: + * Refer to macro "__HAL_RCC_COMP_CLK_ENABLE()". + * Note: In addition with this macro, Vrefint output buffer must be + * connected to the selected I/O pin. Refer to macro + * "__HAL_RI_IOSWITCH_CLOSE()". + * @note ENABLE: Internal reference voltage connected to I/O group 3 + * @note DISABLE: Internal reference voltage disconnected from I/O group 3 + * @retval None + */ +#define __HAL_SYSCFG_VREFINT_OUT_ENABLE() SET_BIT(COMP->CSR, COMP_CSR_VREFOUTEN) +#define __HAL_SYSCFG_VREFINT_OUT_DISABLE() CLEAR_BIT(COMP->CSR, COMP_CSR_VREFOUTEN) + +/** + * @} + */ + +/** @defgroup SYSCFG_BootModeConfig Boot Mode Configuration + * @{ + */ + +/** + * @brief Main Flash memory mapped at 0x00000000 + */ +#define __HAL_SYSCFG_REMAPMEMORY_FLASH() CLEAR_BIT(SYSCFG->MEMRMP, SYSCFG_MEMRMP_MEM_MODE) + +/** @brief System Flash memory mapped at 0x00000000 + */ +#define __HAL_SYSCFG_REMAPMEMORY_SYSTEMFLASH() MODIFY_REG(SYSCFG->MEMRMP, SYSCFG_MEMRMP_MEM_MODE, SYSCFG_MEMRMP_MEM_MODE_0) + +/** @brief Embedded SRAM mapped at 0x00000000 + */ +#define __HAL_SYSCFG_REMAPMEMORY_SRAM() MODIFY_REG(SYSCFG->MEMRMP, SYSCFG_MEMRMP_MEM_MODE, SYSCFG_MEMRMP_MEM_MODE_0 | SYSCFG_MEMRMP_MEM_MODE_1) + +#if defined(FSMC_R_BASE) +/** @brief FSMC Bank1 (NOR/PSRAM 1 and 2) mapped at 0x00000000 + */ +#define __HAL_SYSCFG_REMAPMEMORY_FSMC() MODIFY_REG(SYSCFG->MEMRMP, SYSCFG_MEMRMP_MEM_MODE, SYSCFG_MEMRMP_MEM_MODE_1) + +#endif /* FSMC_R_BASE */ + +/** + * @brief Returns the boot mode as configured by user. + * @retval The boot mode as configured by user. The returned value can be one + * of the following values: + * @arg SYSCFG_BOOT_MAINFLASH + * @arg SYSCFG_BOOT_SYSTEMFLASH + * @arg SYSCFG_BOOT_FSMC (available only for STM32L151xD, STM32L152xD & STM32L162xD) + * @arg SYSCFG_BOOT_SRAM + */ +#define __HAL_SYSCFG_GET_BOOT_MODE() READ_BIT(SYSCFG->MEMRMP, SYSCFG_MEMRMP_BOOT_MODE) + +/** + * @} + */ + +/** @defgroup SYSCFG_USBConfig USB DP line Configuration + * @{ + */ + +/** + * @brief Control the internal pull-up on USB DP line. + */ +#define __HAL_SYSCFG_USBPULLUP_ENABLE() SET_BIT(SYSCFG->PMC, SYSCFG_PMC_USB_PU) + +#define __HAL_SYSCFG_USBPULLUP_DISABLE() CLEAR_BIT(SYSCFG->PMC, SYSCFG_PMC_USB_PU) + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup RI_Macris RI: Routing Interface + * @{ + */ + +/** @defgroup RI_InputCaputureConfig Input Capture configuration + * @{ + */ + +/** + * @brief Configures the routing interface to map Input Capture 1 of TIMx to a selected I/O pin. + * @param __TIMSELECT__: Timer select. + * This parameter can be one of the following values: + * @arg TIM_SELECT_NONE: No timer selected and default Timer mapping is enabled. + * @arg TIM_SELECT_TIM2: Timer 2 Input Captures to be routed. + * @arg TIM_SELECT_TIM3: Timer 3 Input Captures to be routed. + * @arg TIM_SELECT_TIM4: Timer 4 Input Captures to be routed. + * @param __INPUT__: selects which pin to be routed to Input Capture. + * This parameter must be a value of @ref RI_InputCaptureRouting + * e.g. + * __HAL_RI_REMAP_INPUTCAPTURE1(TIM_SELECT_TIM2, RI_INPUTCAPTUREROUTING_1) + * allows routing of Input capture IC1 of TIM2 to PA4. + * For details about correspondence between RI_INPUTCAPTUREROUTING_x + * and I/O pins refer to the parameters' description in the header file + * or refer to the product reference manual. + * @note Input capture selection bits are not reset by this function. + * To reset input capture selection bits, use SYSCFG_RIDeInit() function. + * @note The I/O should be configured in alternate function mode (AF14) using + * GPIO_PinAFConfig() function. + * @retval None. + */ +#define __HAL_RI_REMAP_INPUTCAPTURE1(__TIMSELECT__, __INPUT__) \ + do {assert_param(IS_RI_TIM(__TIMSELECT__)); \ + assert_param(IS_RI_INPUTCAPTURE_ROUTING(__INPUT__)); \ + MODIFY_REG(RI->ICR, RI_ICR_TIM, (__TIMSELECT__)); \ + SET_BIT(RI->ICR, RI_INPUTCAPTURE_IC1); \ + MODIFY_REG(RI->ICR, RI_ICR_IC1OS, (__INPUT__) << POSITION_VAL(RI_ICR_IC1OS)); \ + }while(0) + +/** + * @brief Configures the routing interface to map Input Capture 2 of TIMx to a selected I/O pin. + * @param __TIMSELECT__: Timer select. + * This parameter can be one of the following values: + * @arg TIM_SELECT_NONE: No timer selected and default Timer mapping is enabled. + * @arg TIM_SELECT_TIM2: Timer 2 Input Captures to be routed. + * @arg TIM_SELECT_TIM3: Timer 3 Input Captures to be routed. + * @arg TIM_SELECT_TIM4: Timer 4 Input Captures to be routed. + * @param __INPUT__: selects which pin to be routed to Input Capture. + * This parameter must be a value of @ref RI_InputCaptureRouting + * @retval None. + */ +#define __HAL_RI_REMAP_INPUTCAPTURE2(__TIMSELECT__, __INPUT__) \ + do {assert_param(IS_RI_TIM(__TIMSELECT__)); \ + assert_param(IS_RI_INPUTCAPTURE_ROUTING(__INPUT__)); \ + MODIFY_REG(RI->ICR, RI_ICR_TIM, (__TIMSELECT__)); \ + SET_BIT(RI->ICR, RI_INPUTCAPTURE_IC2); \ + MODIFY_REG(RI->ICR, RI_ICR_IC2OS, (__INPUT__) << POSITION_VAL(RI_ICR_IC2OS)); \ + }while(0) + +/** + * @brief Configures the routing interface to map Input Capture 3 of TIMx to a selected I/O pin. + * @param __TIMSELECT__: Timer select. + * This parameter can be one of the following values: + * @arg TIM_SELECT_NONE: No timer selected and default Timer mapping is enabled. + * @arg TIM_SELECT_TIM2: Timer 2 Input Captures to be routed. + * @arg TIM_SELECT_TIM3: Timer 3 Input Captures to be routed. + * @arg TIM_SELECT_TIM4: Timer 4 Input Captures to be routed. + * @param __INPUT__: selects which pin to be routed to Input Capture. + * This parameter must be a value of @ref RI_InputCaptureRouting + * @retval None. + */ +#define __HAL_RI_REMAP_INPUTCAPTURE3(__TIMSELECT__, __INPUT__) \ + do {assert_param(IS_RI_TIM(__TIMSELECT__)); \ + assert_param(IS_RI_INPUTCAPTURE_ROUTING(__INPUT__)); \ + MODIFY_REG(RI->ICR, RI_ICR_TIM, (__TIMSELECT__)); \ + SET_BIT(RI->ICR, RI_INPUTCAPTURE_IC3); \ + MODIFY_REG(RI->ICR, RI_ICR_IC3OS, (__INPUT__) << POSITION_VAL(RI_ICR_IC3OS)); \ + }while(0) + +/** + * @brief Configures the routing interface to map Input Capture 4 of TIMx to a selected I/O pin. + * @param __TIMSELECT__: Timer select. + * This parameter can be one of the following values: + * @arg TIM_SELECT_NONE: No timer selected and default Timer mapping is enabled. + * @arg TIM_SELECT_TIM2: Timer 2 Input Captures to be routed. + * @arg TIM_SELECT_TIM3: Timer 3 Input Captures to be routed. + * @arg TIM_SELECT_TIM4: Timer 4 Input Captures to be routed. + * @param __INPUT__: selects which pin to be routed to Input Capture. + * This parameter must be a value of @ref RI_InputCaptureRouting + * @retval None. + */ +#define __HAL_RI_REMAP_INPUTCAPTURE4(__TIMSELECT__, __INPUT__) \ + do {assert_param(IS_RI_TIM(__TIMSELECT__)); \ + assert_param(IS_RI_INPUTCAPTURE_ROUTING(__INPUT__)); \ + MODIFY_REG(RI->ICR, RI_ICR_TIM, (__TIMSELECT__)); \ + SET_BIT(RI->ICR, RI_INPUTCAPTURE_IC4); \ + MODIFY_REG(RI->ICR, RI_ICR_IC4OS, (__INPUT__) << POSITION_VAL(RI_ICR_IC4OS)); \ + }while(0) + +/** + * @} + */ + +/** @defgroup RI_SwitchControlConfig Switch Control configuration + * @{ + */ + +/** + * @brief Enable or disable the switch control mode. + * @note ENABLE: ADC analog switches closed if the corresponding + * I/O switch is also closed. + * When using COMP1, switch control mode must be enabled. + * @note DISABLE: ADC analog switches open or controlled by the ADC interface. + * When using the ADC for acquisition, switch control mode + * must be disabled. + * @note COMP1 comparator and ADC cannot be used at the same time since + * they share the ADC switch matrix. + * @retval None + */ +#define __HAL_RI_SWITCHCONTROLMODE_ENABLE() SET_BIT(RI->ASCR1, RI_ASCR1_SCM) + +#define __HAL_RI_SWITCHCONTROLMODE_DISABLE() CLEAR_BIT(RI->ASCR1, RI_ASCR1_SCM) + +/* + * @brief Close or Open the routing interface Input Output switches. + * @param __IOSWITCH__: selects the I/O analog switch number. + * This parameter must be a value of @ref RI_IOSwitch + * @retval None + */ +#define __HAL_RI_IOSWITCH_CLOSE(__IOSWITCH__) do { assert_param(IS_RI_IOSWITCH(__IOSWITCH__)); \ + if ((__IOSWITCH__) >> 31 != 0 ) \ + { \ + SET_BIT(RI->ASCR1, (__IOSWITCH__) & 0x7FFFFFFF); \ + } \ + else \ + { \ + SET_BIT(RI->ASCR2, (__IOSWITCH__)); \ + } \ + }while(0) + +#define __HAL_RI_IOSWITCH_OPEN(__IOSWITCH__) do { assert_param(IS_RI_IOSWITCH(__IOSWITCH__)); \ + if ((__IOSWITCH__) >> 31 != 0 ) \ + { \ + CLEAR_BIT(RI->ASCR1, (__IOSWITCH__) & 0x7FFFFFFF); \ + } \ + else \ + { \ + CLEAR_BIT(RI->ASCR2, (__IOSWITCH__)); \ + } \ + }while(0) + +#if defined (COMP_CSR_SW1) +/** + * @brief Close or open the internal switch COMP1_SW1. + * This switch connects I/O pin PC3 (can be used as ADC channel 13) + * and OPAMP3 ouput to ADC switch matrix (ADC channel VCOMP, channel + * 26) and COMP1 non-inverting input. + * Pin PC3 connection depends on another switch setting, refer to + * macro "__HAL_ADC_CHANNEL_SPEED_FAST()". + * @retval None. + */ +#define __HAL_RI_SWITCH_COMP1_SW1_CLOSE() SET_BIT(COMP->CSR, COMP_CSR_SW1) + +#define __HAL_RI_SWITCH_COMP1_SW1_OPEN() CLEAR_BIT(COMP->CSR, COMP_CSR_SW1) +#endif /* COMP_CSR_SW1 */ + +/** + * @} + */ + +/** @defgroup RI_HystConfig Hysteresis Activation and Deactivation + * @{ + */ + +/** + * @brief Enable or disable Hysteresis of the input schmitt triger of Ports A + * When the I/Os are programmed in input mode by standard I/O port + * registers, the Schmitt trigger and the hysteresis are enabled by default. + * When hysteresis is disabled, it is possible to read the + * corresponding port with a trigger level of VDDIO/2. + * @param __IOPIN__ : Selects the pin(s) on which to enable or disable hysteresis. + * This parameter must be a value of @ref RI_Pin + * @retval None + */ +#define __HAL_RI_HYSTERIS_PORTA_ON(__IOPIN__) do {assert_param(IS_RI_PIN(__IOPIN__)); \ + CLEAR_BIT(RI->HYSCR1, (__IOPIN__)); \ + } while(0) + +#define __HAL_RI_HYSTERIS_PORTA_OFF(__IOPIN__) do {assert_param(IS_RI_PIN(__IOPIN__)); \ + SET_BIT(RI->HYSCR1, (__IOPIN__)); \ + } while(0) + +/** + * @brief Enable or disable Hysteresis of the input schmitt triger of Ports B + * When the I/Os are programmed in input mode by standard I/O port + * registers, the Schmitt trigger and the hysteresis are enabled by default. + * When hysteresis is disabled, it is possible to read the + * corresponding port with a trigger level of VDDIO/2. + * @param __IOPIN__ : Selects the pin(s) on which to enable or disable hysteresis. + * This parameter must be a value of @ref RI_Pin + * @retval None + */ +#define __HAL_RI_HYSTERIS_PORTB_ON(__IOPIN__) do {assert_param(IS_RI_PIN(__IOPIN__)); \ + CLEAR_BIT(RI->HYSCR1, (__IOPIN__) << 16 ); \ + } while(0) + +#define __HAL_RI_HYSTERIS_PORTB_OFF(__IOPIN__) do {assert_param(IS_RI_PIN(__IOPIN__)); \ + SET_BIT(RI->HYSCR1, (__IOPIN__) << 16 ); \ + } while(0) + +/** + * @brief Enable or disable Hysteresis of the input schmitt triger of Ports C + * When the I/Os are programmed in input mode by standard I/O port + * registers, the Schmitt trigger and the hysteresis are enabled by default. + * When hysteresis is disabled, it is possible to read the + * corresponding port with a trigger level of VDDIO/2. + * @param __IOPIN__ : Selects the pin(s) on which to enable or disable hysteresis. + * This parameter must be a value of @ref RI_Pin + * @retval None + */ +#define __HAL_RI_HYSTERIS_PORTC_ON(__IOPIN__) do {assert_param(IS_RI_PIN(__IOPIN__)); \ + CLEAR_BIT(RI->HYSCR2, (__IOPIN__)); \ + } while(0) + +#define __HAL_RI_HYSTERIS_PORTC_OFF(__IOPIN__) do {assert_param(IS_RI_PIN(__IOPIN__)); \ + SET_BIT(RI->HYSCR2, (__IOPIN__)); \ + } while(0) + +/** + * @brief Enable or disable Hysteresis of the input schmitt triger of Ports D + * When the I/Os are programmed in input mode by standard I/O port + * registers, the Schmitt trigger and the hysteresis are enabled by default. + * When hysteresis is disabled, it is possible to read the + * corresponding port with a trigger level of VDDIO/2. + * @param __IOPIN__ : Selects the pin(s) on which to enable or disable hysteresis. + * This parameter must be a value of @ref RI_Pin + * @retval None + */ +#define __HAL_RI_HYSTERIS_PORTD_ON(__IOPIN__) do {assert_param(IS_RI_PIN(__IOPIN__)); \ + CLEAR_BIT(RI->HYSCR2, (__IOPIN__) << 16 ); \ + } while(0) + +#define __HAL_RI_HYSTERIS_PORTD_OFF(__IOPIN__) do {assert_param(IS_RI_PIN(__IOPIN__)); \ + SET_BIT(RI->HYSCR2, (__IOPIN__) << 16 ); \ + } while(0) + +#if defined (GPIOE_BASE) + +/** + * @brief Enable or disable Hysteresis of the input schmitt triger of Ports E + * When the I/Os are programmed in input mode by standard I/O port + * registers, the Schmitt trigger and the hysteresis are enabled by default. + * When hysteresis is disabled, it is possible to read the + * corresponding port with a trigger level of VDDIO/2. + * @param __IOPIN__ : Selects the pin(s) on which to enable or disable hysteresis. + * This parameter must be a value of @ref RI_Pin + * @retval None + */ +#define __HAL_RI_HYSTERIS_PORTE_ON(__IOPIN__) do {assert_param(IS_RI_PIN(__IOPIN__)); \ + CLEAR_BIT(RI->HYSCR3, (__IOPIN__)); \ + } while(0) + +#define __HAL_RI_HYSTERIS_PORTE_OFF(__IOPIN__) do {assert_param(IS_RI_PIN(__IOPIN__)); \ + SET_BIT(RI->HYSCR3, (__IOPIN__)); \ + } while(0) + +#endif /* GPIOE_BASE */ + +#if defined(GPIOF_BASE) || defined(GPIOG_BASE) + +/** + * @brief Enable or disable Hysteresis of the input schmitt triger of Ports F + * When the I/Os are programmed in input mode by standard I/O port + * registers, the Schmitt trigger and the hysteresis are enabled by default. + * When hysteresis is disabled, it is possible to read the + * corresponding port with a trigger level of VDDIO/2. + * @param __IOPIN__ : Selects the pin(s) on which to enable or disable hysteresis. + * This parameter must be a value of @ref RI_Pin + * @retval None + */ +#define __HAL_RI_HYSTERIS_PORTF_ON(__IOPIN__) do {assert_param(IS_RI_PIN(__IOPIN__)); \ + CLEAR_BIT(RI->HYSCR3, (__IOPIN__) << 16 ); \ + } while(0) + +#define __HAL_RI_HYSTERIS_PORTF_OFF(__IOPIN__) do {assert_param(IS_RI_PIN(__IOPIN__)); \ + SET_BIT(RI->HYSCR3, (__IOPIN__) << 16 ); \ + } while(0) + +/** + * @brief Enable or disable Hysteresis of the input schmitt triger of Ports G + * When the I/Os are programmed in input mode by standard I/O port + * registers, the Schmitt trigger and the hysteresis are enabled by default. + * When hysteresis is disabled, it is possible to read the + * corresponding port with a trigger level of VDDIO/2. + * @param __IOPIN__ : Selects the pin(s) on which to enable or disable hysteresis. + * This parameter must be a value of @ref RI_Pin + * @retval None + */ +#define __HAL_RI_HYSTERIS_PORTG_ON(__IOPIN__) do {assert_param(IS_RI_PIN(__IOPIN__)); \ + CLEAR_BIT(RI->HYSCR4, (__IOPIN__)); \ + } while(0) + +#define __HAL_RI_HYSTERIS_PORTG_OFF(__IOPIN__) do {assert_param(IS_RI_PIN(__IOPIN__)); \ + SET_BIT(RI->HYSCR4, (__IOPIN__)); \ + } while(0) + +#endif /* GPIOF_BASE || GPIOG_BASE */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup HAL_Exported_Functions + * @{ + */ + +/** @addtogroup HAL_Exported_Functions_Group1 + * @{ + */ + +/* Initialization and de-initialization functions ******************************/ +HAL_StatusTypeDef HAL_Init(void); +HAL_StatusTypeDef HAL_DeInit(void); +void HAL_MspInit(void); +void HAL_MspDeInit(void); +HAL_StatusTypeDef HAL_InitTick (uint32_t TickPriority); + +/** + * @} + */ + +/** @addtogroup HAL_Exported_Functions_Group2 + * @{ + */ + +/* Peripheral Control functions ************************************************/ +void HAL_IncTick(void); +void HAL_Delay(__IO uint32_t Delay); +uint32_t HAL_GetTick(void); +void HAL_SuspendTick(void); +void HAL_ResumeTick(void); +uint32_t HAL_GetHalVersion(void); +uint32_t HAL_GetREVID(void); +uint32_t HAL_GetDEVID(void); +void HAL_DBGMCU_EnableDBGSleepMode(void); +void HAL_DBGMCU_DisableDBGSleepMode(void); +void HAL_DBGMCU_EnableDBGStopMode(void); +void HAL_DBGMCU_DisableDBGStopMode(void); +void HAL_DBGMCU_EnableDBGStandbyMode(void); +void HAL_DBGMCU_DisableDBGStandbyMode(void); + +/** + * @} + */ + +/** + * @} + */ + + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32L1xx_HAL_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_adc.h b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_adc.h new file mode 100755 index 0000000..3f0007b --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_adc.h @@ -0,0 +1,1333 @@ +/** + ****************************************************************************** + * @file stm32l1xx_hal_adc.h + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief Header file containing functions prototypes of ADC HAL library. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L1xx_HAL_ADC_H +#define __STM32L1xx_HAL_ADC_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_hal_def.h" + +/** @addtogroup STM32L1xx_HAL_Driver + * @{ + */ + +/** @addtogroup ADC + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup ADC_Exported_Types ADC Exported Types + * @{ + */ + +/** + * @brief Structure definition of ADC and regular group initialization + * @note Parameters of this structure are shared within 2 scopes: + * - Scope entire ADC (affects regular and injected groups): ClockPrescaler, Resolution, ScanConvMode, DataAlign, ScanConvMode, EOCSelection, LowPowerAutoWait, LowPowerAutoPowerOff, ChannelsBank. + * - Scope regular group: ContinuousConvMode, NbrOfConversion, DiscontinuousConvMode, NbrOfDiscConversion, ExternalTrigConvEdge, ExternalTrigConv. + * @note The setting of these parameters with function HAL_ADC_Init() is conditioned to ADC state. + * ADC state can be either: + * - For all parameters: ADC disabled + * - For all parameters except 'Resolution', 'ScanConvMode', 'LowPowerAutoWait', 'LowPowerAutoPowerOff', 'DiscontinuousConvMode', 'NbrOfDiscConversion' : ADC enabled without conversion on going on regular group. + * - For parameters 'ExternalTrigConv' and 'ExternalTrigConvEdge': ADC enabled, even with conversion on going. + * If ADC is not in the appropriate state to modify some parameters, these parameters setting is bypassed + * without error reporting (as it can be the expected behaviour in case of intended action to update another parameter (which fullfills the ADC state condition) on the fly). + */ +typedef struct +{ + uint32_t ClockPrescaler; /*!< Select ADC clock source (asynchronous clock derived from HSI RC oscillator) and clock prescaler. + This parameter can be a value of @ref ADC_ClockPrescaler + Note: In case of usage of channels on injected group, ADC frequency should be lower than AHB clock frequency /4 for resolution 12 or 10 bits, + AHB clock frequency /3 for resolution 8 bits, AHB clock frequency /2 for resolution 6 bits. + Note: HSI RC oscillator must be preliminarily enabled at RCC top level. */ + uint32_t Resolution; /*!< Configures the ADC resolution. + This parameter can be a value of @ref ADC_Resolution */ + uint32_t DataAlign; /*!< Specifies ADC data alignment to right (MSB on register bit 11 and LSB on register bit 0) (default setting) + or to left (if regular group: MSB on register bit 15 and LSB on register bit 4, if injected group (MSB kept as signed value due to potential negative value after offset application): MSB on register bit 14 and LSB on register bit 3). + This parameter can be a value of @ref ADC_Data_align */ + uint32_t ScanConvMode; /*!< Configures the sequencer of regular and injected groups. + This parameter can be associated to parameter 'DiscontinuousConvMode' to have main sequence subdivided in successive parts. + If disabled: Conversion is performed in single mode (one channel converted, the one defined in rank 1). + Parameters 'NbrOfConversion' and 'InjectedNbrOfConversion' are discarded (equivalent to set to 1). + If enabled: Conversions are performed in sequence mode (multiple ranks defined by 'NbrOfConversion'/'InjectedNbrOfConversion' and each channel rank). + Scan direction is upward: from rank1 to rank 'n'. + This parameter can be a value of @ref ADC_Scan_mode */ + uint32_t EOCSelection; /*!< Specifies what EOC (End Of Conversion) flag is used for conversion by polling and interruption: end of conversion of each rank or complete sequence. + This parameter can be a value of @ref ADC_EOCSelection. + Note: For injected group, end of conversion (flag&IT) is raised only at the end of the sequence. + Therefore, if end of conversion is set to end of each conversion, injected group should not be used with interruption (HAL_ADCEx_InjectedStart_IT) + or polling (HAL_ADCEx_InjectedStart and HAL_ADCEx_InjectedPollForConversion). By the way, polling is still possible since driver will use an estimated timing for end of injected conversion. + Note: If overrun feature is intended to be used, use ADC in mode 'interruption' (function HAL_ADC_Start_IT() ) with parameter EOCSelection set to end of each conversion or in mode 'transfer by DMA' (function HAL_ADC_Start_DMA()). + If overrun feature is intended to be bypassed, use ADC in mode 'polling' or 'interruption' with parameter EOCSelection must be set to end of sequence */ + uint32_t LowPowerAutoWait; /*!< Selects the dynamic low power Auto Delay: new conversion start only when the previous + conversion (for regular group) or previous sequence (for injected group) has been treated by user software, using function HAL_ADC_GetValue() or HAL_ADCEx_InjectedGetValue(). + This feature automatically adapts the speed of ADC to the speed of the system that reads the data. Moreover, this avoids risk of overrun for low frequency applications. + This parameter can be a value of @ref ADC_LowPowerAutoWait. + Note: Do not use with interruption or DMA (HAL_ADC_Start_IT(), HAL_ADC_Start_DMA()) since they have to clear immediately the EOC flag to free the IRQ vector sequencer. + Do use with polling: 1. Start conversion with HAL_ADC_Start(), 2. Later on, when conversion data is needed: use HAL_ADC_PollForConversion() to ensure that conversion is completed + and use HAL_ADC_GetValue() to retrieve conversion result and trig another conversion (in case of usage of injected group, use the equivalent functions HAL_ADCExInjected_Start(), HAL_ADCEx_InjectedGetValue(), ...). + Note: ADC clock latency and some timing constraints depending on clock prescaler have to be taken into account: refer to reference manual (register ADC_CR2 bit DELS description). */ + uint32_t LowPowerAutoPowerOff; /*!< Selects the auto-off mode: the ADC automatically powers-off after a conversion and automatically wakes-up when a new conversion is triggered (with startup time between trigger and start of sampling). + This feature can be combined with automatic wait mode (parameter 'LowPowerAutoWait'). + This parameter can be a value of @ref ADC_LowPowerAutoPowerOff. */ + uint32_t ChannelsBank; /*!< Selects the ADC channels bank. + This parameter can be a value of @ref ADC_ChannelsBank. + Note: Banks availability depends on devices categories. + Note: To change bank selection on the fly, without going through execution of 'HAL_ADC_Init()', macro '__HAL_ADC_CHANNELS_BANK()' can be used directly. */ + uint32_t ContinuousConvMode; /*!< Specifies whether the conversion is performed in single mode (one conversion) or continuous mode for regular group, + after the selected trigger occurred (software start or external trigger). + This parameter can be set to ENABLE or DISABLE. */ +#if defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) + uint32_t NbrOfConversion; /*!< Specifies the number of ranks that will be converted within the regular group sequencer. + To use regular group sequencer and convert several ranks, parameter 'ScanConvMode' must be enabled. + This parameter must be a number between Min_Data = 1 and Max_Data = 28. */ +#else + uint32_t NbrOfConversion; /*!< Specifies the number of ranks that will be converted within the regular group sequencer. + To use regular group sequencer and convert several ranks, parameter 'ScanConvMode' must be enabled. + This parameter must be a number between Min_Data = 1 and Max_Data = 27. */ +#endif /* STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ + uint32_t DiscontinuousConvMode; /*!< Specifies whether the conversions sequence of regular group is performed in Complete-sequence/Discontinuous-sequence (main sequence subdivided in successive parts). + Discontinuous mode is used only if sequencer is enabled (parameter 'ScanConvMode'). If sequencer is disabled, this parameter is discarded. + Discontinuous mode can be enabled only if continuous mode is disabled. If continuous mode is enabled, this parameter setting is discarded. + This parameter can be set to ENABLE or DISABLE. */ + uint32_t NbrOfDiscConversion; /*!< Specifies the number of discontinuous conversions in which the main sequence of regular group (parameter NbrOfConversion) will be subdivided. + If parameter 'DiscontinuousConvMode' is disabled, this parameter is discarded. + This parameter must be a number between Min_Data = 1 and Max_Data = 8. */ + uint32_t ExternalTrigConv; /*!< Selects the external event used to trigger the conversion start of regular group. + If set to ADC_SOFTWARE_START, external triggers are disabled. + If set to external trigger source, triggering is on event rising edge by default. + This parameter can be a value of @ref ADC_External_trigger_source_Regular */ + uint32_t ExternalTrigConvEdge; /*!< Selects the external trigger edge of regular group. + If trigger is set to ADC_SOFTWARE_START, this parameter is discarded. + This parameter can be a value of @ref ADC_External_trigger_edge_Regular */ + uint32_t DMAContinuousRequests; /*!< Specifies whether the DMA requests are performed in one shot mode (DMA transfer stop when number of conversions is reached) + or in Continuous mode (DMA transfer unlimited, whatever number of conversions). + Note: In continuous mode, DMA must be configured in circular mode. Otherwise an overrun will be triggered when DMA buffer maximum pointer is reached. + Note: This parameter must be modified when no conversion is on going on both regular and injected groups (ADC disabled, or ADC enabled without continuous mode or external trigger that could launch a conversion). + This parameter can be set to ENABLE or DISABLE. */ +}ADC_InitTypeDef; + +/** + * @brief Structure definition of ADC channel for regular group + * @note The setting of these parameters with function HAL_ADC_ConfigChannel() is conditioned to ADC state. + * ADC can be either disabled or enabled without conversion on going on regular group. + */ +typedef struct +{ + uint32_t Channel; /*!< Specifies the channel to configure into ADC regular group. + This parameter can be a value of @ref ADC_channels + Note: Depending on devices, some channels may not be available on package pins. Refer to device datasheet for channels availability. + Maximum number of channels by device category (without taking in account each device package constraints): + STM32L1 category 1, 2: 24 channels on external pins + 3 channels on internal measurement paths (VrefInt, Temp sensor, Vcomp): Channel 0 to channel 26. + STM32L1 category 3: 25 channels on external pins + 3 channels on internal measurement paths (VrefInt, Temp sensor, Vcomp): Channel 0 to channel 26, 1 additional channel in bank B. Note: OPAMP1 and OPAMP2 are connected internally but not increasing internal channels number: they are sharing ADC input with external channels ADC_IN3 and ADC_IN8. + STM32L1 category 4, 5: 40 channels on external pins + 3 channels on internal measurement paths (VrefInt, Temp sensor, Vcomp): Channel 0 to channel 31, 11 additional channels in bank B. Note: OPAMP1 and OPAMP2 are connected internally but not increasing internal channels number: they are sharing ADC input with external channels ADC_IN3 and ADC_IN8. + Note: In case of peripherals OPAMPx not used: 3 channels (3, 8, 13) can be configured as direct channels (fast channels). Refer to macro ' __HAL_ADC_CHANNEL_SPEED_FAST() '. + Note: In case of peripheral OPAMP3 and ADC channel OPAMP3 used (OPAMP3 available on STM32L1 devices Cat.4 only): the analog switch COMP1_SW1 must be closed. Refer to macro: ' __HAL_OPAMP_OPAMP3OUT_CONNECT_ADC_COMP1() '. */ + uint32_t Rank; /*!< Specifies the rank in the regular group sequencer. + This parameter can be a value of @ref ADC_regular_rank + Note: In case of need to disable a channel or change order of conversion sequencer, rank containing a previous channel setting can be overwritten by the new channel setting (or parameter number of conversions can be adjusted) */ + uint32_t SamplingTime; /*!< Sampling time value to be set for the selected channel. + Unit: ADC clock cycles + Conversion time is the addition of sampling time and processing time (12 ADC clock cycles at ADC resolution 12 bits, 11 cycles at 10 bits, 9 cycles at 8 bits, 7 cycles at 6 bits). + This parameter can be a value of @ref ADC_sampling_times + Caution: This parameter updates the parameter property of the channel, that can be used into regular and/or injected groups. + If this same channel has been previously configured in the other group (regular/injected), it will be updated to last setting. + Note: In case of usage of internal measurement channels (VrefInt/Vbat/TempSensor), + sampling time constraints must be respected (sampling time can be adjusted in function of ADC clock frequency and sampling time setting) + Refer to device datasheet for timings values, parameters TS_vrefint, TS_temp (values rough order: 4us min). */ +}ADC_ChannelConfTypeDef; + +/** + * @brief ADC Configuration analog watchdog definition + * @note The setting of these parameters with function is conditioned to ADC state. + * ADC state can be either disabled or enabled without conversion on going on regular and injected groups. + */ +typedef struct +{ + uint32_t WatchdogMode; /*!< Configures the ADC analog watchdog mode: single/all channels, regular/injected group. + This parameter can be a value of @ref ADC_analog_watchdog_mode. */ + uint32_t Channel; /*!< Selects which ADC channel to monitor by analog watchdog. + This parameter has an effect only if watchdog mode is configured on single channel (parameter WatchdogMode) + This parameter can be a value of @ref ADC_channels. */ + uint32_t ITMode; /*!< Specifies whether the analog watchdog is configured in interrupt or polling mode. + This parameter can be set to ENABLE or DISABLE */ + uint32_t HighThreshold; /*!< Configures the ADC analog watchdog High threshold value. + This parameter must be a number between Min_Data = 0x000 and Max_Data = 0xFFF. */ + uint32_t LowThreshold; /*!< Configures the ADC analog watchdog High threshold value. + This parameter must be a number between Min_Data = 0x000 and Max_Data = 0xFFF. */ + uint32_t WatchdogNumber; /*!< Reserved for future use, can be set to 0 */ +}ADC_AnalogWDGConfTypeDef; + +/** + * @brief HAL ADC state machine: ADC states definition (bitfields) + */ +/* States of ADC global scope */ +#define HAL_ADC_STATE_RESET ((uint32_t)0x00000000) /*!< ADC not yet initialized or disabled */ +#define HAL_ADC_STATE_READY ((uint32_t)0x00000001) /*!< ADC peripheral ready for use */ +#define HAL_ADC_STATE_BUSY_INTERNAL ((uint32_t)0x00000002) /*!< ADC is busy to internal process (initialization, calibration) */ +#define HAL_ADC_STATE_TIMEOUT ((uint32_t)0x00000004) /*!< TimeOut occurrence */ + +/* States of ADC errors */ +#define HAL_ADC_STATE_ERROR_INTERNAL ((uint32_t)0x00000010) /*!< Internal error occurrence */ +#define HAL_ADC_STATE_ERROR_CONFIG ((uint32_t)0x00000020) /*!< Configuration error occurrence */ +#define HAL_ADC_STATE_ERROR_DMA ((uint32_t)0x00000040) /*!< DMA error occurrence */ + +/* States of ADC group regular */ +#define HAL_ADC_STATE_REG_BUSY ((uint32_t)0x00000100) /*!< A conversion on group regular is ongoing or can occur (either by continuous mode, + external trigger, low power auto power-on (if feature available), multimode ADC master control (if feature available)) */ +#define HAL_ADC_STATE_REG_EOC ((uint32_t)0x00000200) /*!< Conversion data available on group regular */ +#define HAL_ADC_STATE_REG_OVR ((uint32_t)0x00000400) /*!< Overrun occurrence */ +#define HAL_ADC_STATE_REG_EOSMP ((uint32_t)0x00000800) /*!< Not available on STM32L1 device: End Of Sampling flag raised */ + +/* States of ADC group injected */ +#define HAL_ADC_STATE_INJ_BUSY ((uint32_t)0x00001000) /*!< A conversion on group injected is ongoing or can occur (either by auto-injection mode, + external trigger, low power auto power-on (if feature available), multimode ADC master control (if feature available)) */ +#define HAL_ADC_STATE_INJ_EOC ((uint32_t)0x00002000) /*!< Conversion data available on group injected */ +#define HAL_ADC_STATE_INJ_JQOVF ((uint32_t)0x00004000) /*!< Not available on STM32L1 device: Injected queue overflow occurrence */ + +/* States of ADC analog watchdogs */ +#define HAL_ADC_STATE_AWD1 ((uint32_t)0x00010000) /*!< Out-of-window occurrence of analog watchdog 1 */ +#define HAL_ADC_STATE_AWD2 ((uint32_t)0x00020000) /*!< Not available on STM32L1 device: Out-of-window occurrence of analog watchdog 2 */ +#define HAL_ADC_STATE_AWD3 ((uint32_t)0x00040000) /*!< Not available on STM32L1 device: Out-of-window occurrence of analog watchdog 3 */ + +/* States of ADC multi-mode */ +#define HAL_ADC_STATE_MULTIMODE_SLAVE ((uint32_t)0x00100000) /*!< Not available on STM32L1 device: ADC in multimode slave state, controlled by another ADC master ( */ + + +/** + * @brief ADC handle Structure definition + */ +typedef struct +{ + ADC_TypeDef *Instance; /*!< Register base address */ + + ADC_InitTypeDef Init; /*!< ADC required parameters */ + + __IO uint32_t NbrOfConversionRank ; /*!< ADC conversion rank counter */ + + DMA_HandleTypeDef *DMA_Handle; /*!< Pointer DMA Handler */ + + HAL_LockTypeDef Lock; /*!< ADC locking object */ + + __IO uint32_t State; /*!< ADC communication state (bitmap of ADC states) */ + + __IO uint32_t ErrorCode; /*!< ADC Error code */ +}ADC_HandleTypeDef; +/** + * @} + */ + + + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup ADC_Exported_Constants ADC Exported Constants + * @{ + */ + +/** @defgroup ADC_Error_Code ADC Error Code + * @{ + */ +#define HAL_ADC_ERROR_NONE ((uint32_t)0x00) /*!< No error */ +#define HAL_ADC_ERROR_INTERNAL ((uint32_t)0x01) /*!< ADC IP internal error: if problem of clocking, + enable/disable, erroneous state */ +#define HAL_ADC_ERROR_OVR ((uint32_t)0x02) /*!< Overrun error */ +#define HAL_ADC_ERROR_DMA ((uint32_t)0x04) /*!< DMA transfer error */ +/** + * @} + */ + +/** @defgroup ADC_ClockPrescaler ADC ClockPrescaler + * @{ + */ +#define ADC_CLOCK_ASYNC_DIV1 ((uint32_t)0x00000000) /*!< ADC asynchronous clock derived from ADC dedicated HSI without prescaler */ +#define ADC_CLOCK_ASYNC_DIV2 ((uint32_t)ADC_CCR_ADCPRE_0) /*!< ADC asynchronous clock derived from ADC dedicated HSI divided by a prescaler of 2 */ +#define ADC_CLOCK_ASYNC_DIV4 ((uint32_t)ADC_CCR_ADCPRE_1) /*!< ADC asynchronous clock derived from ADC dedicated HSI divided by a prescaler of 4 */ +/** + * @} + */ + +/** @defgroup ADC_Resolution ADC Resolution + * @{ + */ +#define ADC_RESOLUTION_12B ((uint32_t)0x00000000) /*!< ADC 12-bit resolution */ +#define ADC_RESOLUTION_10B ((uint32_t)ADC_CR1_RES_0) /*!< ADC 10-bit resolution */ +#define ADC_RESOLUTION_8B ((uint32_t)ADC_CR1_RES_1) /*!< ADC 8-bit resolution */ +#define ADC_RESOLUTION_6B ((uint32_t)ADC_CR1_RES) /*!< ADC 6-bit resolution */ +/** + * @} + */ + +/** @defgroup ADC_Data_align ADC Data_align + * @{ + */ +#define ADC_DATAALIGN_RIGHT ((uint32_t)0x00000000) +#define ADC_DATAALIGN_LEFT ((uint32_t)ADC_CR2_ALIGN) +/** + * @} + */ + +/** @defgroup ADC_Scan_mode ADC Scan mode + * @{ + */ +#define ADC_SCAN_DISABLE ((uint32_t)0x00000000) +#define ADC_SCAN_ENABLE ((uint32_t)ADC_CR1_SCAN) +/** + * @} + */ + +/** @defgroup ADC_External_trigger_edge_Regular ADC external trigger enable for regular group + * @{ + */ +#define ADC_EXTERNALTRIGCONVEDGE_NONE ((uint32_t)0x00000000) +#define ADC_EXTERNALTRIGCONVEDGE_RISING ((uint32_t)ADC_CR2_EXTEN_0) +#define ADC_EXTERNALTRIGCONVEDGE_FALLING ((uint32_t)ADC_CR2_EXTEN_1) +#define ADC_EXTERNALTRIGCONVEDGE_RISINGFALLING ((uint32_t)ADC_CR2_EXTEN) +/** + * @} + */ + +/** @defgroup ADC_External_trigger_source_Regular ADC External trigger source Regular + * @{ + */ +/* List of external triggers with generic trigger name, sorted by trigger */ +/* name: */ + +/* External triggers of regular group for ADC1 */ +#define ADC_EXTERNALTRIGCONV_T2_CC3 ADC_EXTERNALTRIG_T2_CC3 +#define ADC_EXTERNALTRIGCONV_T2_CC2 ADC_EXTERNALTRIG_T2_CC2 +#define ADC_EXTERNALTRIGCONV_T2_TRGO ADC_EXTERNALTRIG_T2_TRGO +#define ADC_EXTERNALTRIGCONV_T3_CC1 ADC_EXTERNALTRIG_T3_CC1 +#define ADC_EXTERNALTRIGCONV_T3_CC3 ADC_EXTERNALTRIG_T3_CC3 +#define ADC_EXTERNALTRIGCONV_T3_TRGO ADC_EXTERNALTRIG_T3_TRGO +#define ADC_EXTERNALTRIGCONV_T4_CC4 ADC_EXTERNALTRIG_T4_CC4 +#define ADC_EXTERNALTRIGCONV_T4_TRGO ADC_EXTERNALTRIG_T4_TRGO +#define ADC_EXTERNALTRIGCONV_T6_TRGO ADC_EXTERNALTRIG_T6_TRGO +#define ADC_EXTERNALTRIGCONV_T9_CC2 ADC_EXTERNALTRIG_T9_CC2 +#define ADC_EXTERNALTRIGCONV_T9_TRGO ADC_EXTERNALTRIG_T9_TRGO +#define ADC_EXTERNALTRIGCONV_EXT_IT11 ADC_EXTERNALTRIG_EXT_IT11 +#define ADC_SOFTWARE_START ((uint32_t)0x00000010) +/** + * @} + */ + +/** @defgroup ADC_EOCSelection ADC EOCSelection + * @{ + */ +#define ADC_EOC_SEQ_CONV ((uint32_t)0x00000000) +#define ADC_EOC_SINGLE_CONV ((uint32_t)ADC_CR2_EOCS) +/** + * @} + */ + +/** @defgroup ADC_LowPowerAutoWait ADC LowPowerAutoWait + * @{ + */ +/*!< Note : For compatibility with other STM32 devices with ADC autowait */ +/* feature limited to enable or disable settings: */ +/* Setting "ADC_AUTOWAIT_UNTIL_DATA_READ" is equivalent to "ENABLE". */ + +#define ADC_AUTOWAIT_DISABLE ((uint32_t)0x00000000) +#define ADC_AUTOWAIT_UNTIL_DATA_READ ((uint32_t)( ADC_CR2_DELS_0)) /*!< Insert a delay between ADC conversions: infinite delay, until the result of previous conversion is read */ +#define ADC_AUTOWAIT_7_APBCLOCKCYCLES ((uint32_t)( ADC_CR2_DELS_1 )) /*!< Insert a delay between ADC conversions: 7 APB clock cycles */ +#define ADC_AUTOWAIT_15_APBCLOCKCYCLES ((uint32_t)( ADC_CR2_DELS_1 | ADC_CR2_DELS_0)) /*!< Insert a delay between ADC conversions: 15 APB clock cycles */ +#define ADC_AUTOWAIT_31_APBCLOCKCYCLES ((uint32_t)(ADC_CR2_DELS_2 )) /*!< Insert a delay between ADC conversions: 31 APB clock cycles */ +#define ADC_AUTOWAIT_63_APBCLOCKCYCLES ((uint32_t)(ADC_CR2_DELS_2 | ADC_CR2_DELS_0)) /*!< Insert a delay between ADC conversions: 63 APB clock cycles */ +#define ADC_AUTOWAIT_127_APBCLOCKCYCLES ((uint32_t)(ADC_CR2_DELS_2 | ADC_CR2_DELS_1 )) /*!< Insert a delay between ADC conversions: 127 APB clock cycles */ +#define ADC_AUTOWAIT_255_APBCLOCKCYCLES ((uint32_t)(ADC_CR2_DELS_2 | ADC_CR2_DELS_1 | ADC_CR2_DELS_0)) /*!< Insert a delay between ADC conversions: 255 APB clock cycles */ + +/** + * @} + */ + +/** @defgroup ADC_LowPowerAutoPowerOff ADC LowPowerAutoPowerOff + * @{ + */ +#define ADC_AUTOPOWEROFF_DISABLE ((uint32_t)0x00000000) +#define ADC_AUTOPOWEROFF_IDLE_PHASE ((uint32_t)ADC_CR1_PDI) /*!< ADC power off when ADC is not converting (idle phase) */ +#define ADC_AUTOPOWEROFF_DELAY_PHASE ((uint32_t)ADC_CR1_PDD) /*!< ADC power off when a delay is inserted between conversions (see parameter ADC_LowPowerAutoWait) */ +#define ADC_AUTOPOWEROFF_IDLE_DELAY_PHASES ((uint32_t)(ADC_CR1_PDI | ADC_CR1_PDD)) /*!< ADC power off when ADC is not converting (idle phase) and when a delay is inserted between conversions */ +/** + * @} + */ + + +/** @defgroup ADC_ChannelsBank ADC ChannelsBank + * @{ + */ +#if defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) +#define ADC_CHANNELS_BANK_A ((uint32_t)0x00000000) +#define ADC_CHANNELS_BANK_B ((uint32_t)ADC_CR2_CFG) + +#define IS_ADC_CHANNELSBANK(BANK) (((BANK) == ADC_CHANNELS_BANK_A) || \ + ((BANK) == ADC_CHANNELS_BANK_B) ) +#else +#define ADC_CHANNELS_BANK_A ((uint32_t)0x00000000) + +#define IS_ADC_CHANNELSBANK(BANK) (((BANK) == ADC_CHANNELS_BANK_A)) +#endif /* STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ +/** + * @} + */ + +/** @defgroup ADC_channels ADC channels + * @{ + */ +/* Note: Depending on devices, some channels may not be available on package */ +/* pins. Refer to device datasheet for channels availability. */ +#define ADC_CHANNEL_0 ((uint32_t)0x00000000) /* Channel different in bank A and bank B */ +#define ADC_CHANNEL_1 ((uint32_t)( ADC_SQR5_SQ1_0)) /* Channel different in bank A and bank B */ +#define ADC_CHANNEL_2 ((uint32_t)( ADC_SQR5_SQ1_1 )) /* Channel different in bank A and bank B */ +#define ADC_CHANNEL_3 ((uint32_t)( ADC_SQR5_SQ1_1 | ADC_SQR5_SQ1_0)) /* Channel different in bank A and bank B */ +#define ADC_CHANNEL_4 ((uint32_t)( ADC_SQR5_SQ1_2 )) /* Direct (fast) channel */ +#define ADC_CHANNEL_5 ((uint32_t)( ADC_SQR5_SQ1_2 | ADC_SQR5_SQ1_0)) /* Direct (fast) channel */ +#define ADC_CHANNEL_6 ((uint32_t)( ADC_SQR5_SQ1_2 | ADC_SQR5_SQ1_1 )) /* Channel different in bank A and bank B */ +#define ADC_CHANNEL_7 ((uint32_t)( ADC_SQR5_SQ1_2 | ADC_SQR5_SQ1_1 | ADC_SQR5_SQ1_0)) /* Channel different in bank A and bank B */ +#define ADC_CHANNEL_8 ((uint32_t)( ADC_SQR5_SQ1_3 )) /* Channel different in bank A and bank B */ +#define ADC_CHANNEL_9 ((uint32_t)( ADC_SQR5_SQ1_3 | ADC_SQR5_SQ1_0)) /* Channel different in bank A and bank B */ +#define ADC_CHANNEL_10 ((uint32_t)( ADC_SQR5_SQ1_3 | ADC_SQR5_SQ1_1 )) /* Channel different in bank A and bank B */ +#define ADC_CHANNEL_11 ((uint32_t)( ADC_SQR5_SQ1_3 | ADC_SQR5_SQ1_1 | ADC_SQR5_SQ1_0)) /* Channel different in bank A and bank B */ +#define ADC_CHANNEL_12 ((uint32_t)( ADC_SQR5_SQ1_3 | ADC_SQR5_SQ1_2 )) /* Channel different in bank A and bank B */ +#define ADC_CHANNEL_13 ((uint32_t)( ADC_SQR5_SQ1_3 | ADC_SQR5_SQ1_2 | ADC_SQR5_SQ1_0)) /* Channel common to both bank A and bank B */ +#define ADC_CHANNEL_14 ((uint32_t)( ADC_SQR5_SQ1_3 | ADC_SQR5_SQ1_2 | ADC_SQR5_SQ1_1 )) /* Channel common to both bank A and bank B */ +#define ADC_CHANNEL_15 ((uint32_t)( ADC_SQR5_SQ1_3 | ADC_SQR5_SQ1_2 | ADC_SQR5_SQ1_1 | ADC_SQR5_SQ1_0)) /* Channel common to both bank A and bank B */ +#define ADC_CHANNEL_16 ((uint32_t)(ADC_SQR5_SQ1_4 )) /* Channel common to both bank A and bank B */ +#define ADC_CHANNEL_17 ((uint32_t)(ADC_SQR5_SQ1_4 | ADC_SQR5_SQ1_0)) /* Channel common to both bank A and bank B */ +#define ADC_CHANNEL_18 ((uint32_t)(ADC_SQR5_SQ1_4 | ADC_SQR5_SQ1_1 )) /* Channel common to both bank A and bank B */ +#define ADC_CHANNEL_19 ((uint32_t)(ADC_SQR5_SQ1_4 | ADC_SQR5_SQ1_1 | ADC_SQR5_SQ1_0)) /* Channel common to both bank A and bank B */ +#define ADC_CHANNEL_20 ((uint32_t)(ADC_SQR5_SQ1_4 | ADC_SQR5_SQ1_2 )) /* Channel common to both bank A and bank B */ +#define ADC_CHANNEL_21 ((uint32_t)(ADC_SQR5_SQ1_4 | ADC_SQR5_SQ1_2 | ADC_SQR5_SQ1_0)) /* Channel common to both bank A and bank B */ +#define ADC_CHANNEL_22 ((uint32_t)(ADC_SQR5_SQ1_4 | ADC_SQR5_SQ1_2 | ADC_SQR5_SQ1_1 )) /* Direct (fast) channel */ +#define ADC_CHANNEL_23 ((uint32_t)(ADC_SQR5_SQ1_4 | ADC_SQR5_SQ1_2 | ADC_SQR5_SQ1_1 | ADC_SQR5_SQ1_0)) /* Direct (fast) channel */ +#define ADC_CHANNEL_24 ((uint32_t)(ADC_SQR5_SQ1_4 | ADC_SQR5_SQ1_3 )) /* Direct (fast) channel */ +#define ADC_CHANNEL_25 ((uint32_t)(ADC_SQR5_SQ1_4 | ADC_SQR5_SQ1_3 | ADC_SQR5_SQ1_0)) /* Direct (fast) channel */ +#define ADC_CHANNEL_26 ((uint32_t)(ADC_SQR5_SQ1_4 | ADC_SQR5_SQ1_3 | ADC_SQR5_SQ1_1 )) /* Channel common to both bank A and bank B */ +#if defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) +#define ADC_CHANNEL_27 ((uint32_t)(ADC_SQR5_SQ1_4 | ADC_SQR5_SQ1_3 | ADC_SQR5_SQ1_1 | ADC_SQR5_SQ1_0)) /* Channel common to both bank A and bank B */ +#define ADC_CHANNEL_28 ((uint32_t)(ADC_SQR5_SQ1_4 | ADC_SQR5_SQ1_3 | ADC_SQR5_SQ1_2 )) /* Channel common to both bank A and bank B */ +#define ADC_CHANNEL_29 ((uint32_t)(ADC_SQR5_SQ1_4 | ADC_SQR5_SQ1_3 | ADC_SQR5_SQ1_2 | ADC_SQR5_SQ1_0)) /* Channel common to both bank A and bank B */ +#define ADC_CHANNEL_30 ((uint32_t)(ADC_SQR5_SQ1_4 | ADC_SQR5_SQ1_3 | ADC_SQR5_SQ1_2 | ADC_SQR5_SQ1_1 )) /* Channel common to both bank A and bank B */ +#define ADC_CHANNEL_31 ((uint32_t)(ADC_SQR5_SQ1_4 | ADC_SQR5_SQ1_3 | ADC_SQR5_SQ1_2 | ADC_SQR5_SQ1_1 | ADC_SQR5_SQ1_0)) /* Channel common to both bank A and bank B */ +#endif /* STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ + +#define ADC_CHANNEL_TEMPSENSOR ADC_CHANNEL_16 /* ADC internal channel (no connection on device pin). Channel common to both bank A and bank B. */ +#define ADC_CHANNEL_VREFINT ADC_CHANNEL_17 /* ADC internal channel (no connection on device pin). Channel common to both bank A and bank B. */ +#define ADC_CHANNEL_VCOMP ADC_CHANNEL_26 /* ADC internal channel (no connection on device pin). Channel common to both bank A and bank B. */ + +#if defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) +#define ADC_CHANNEL_VOPAMP1 ADC_CHANNEL_3 /* Internal connection from OPAMP1 output to ADC switch matrix */ +#define ADC_CHANNEL_VOPAMP2 ADC_CHANNEL_8 /* Internal connection from OPAMP2 output to ADC switch matrix */ +#if defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) +#define ADC_CHANNEL_VOPAMP3 ADC_CHANNEL_13 /* Internal connection from OPAMP3 output to ADC switch matrix */ +#endif /* STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD */ +#endif /* STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ +/** + * @} + */ + +/** @defgroup ADC_sampling_times ADC sampling times + * @{ + */ +#define ADC_SAMPLETIME_4CYCLES ((uint32_t)0x00000000) /*!< Sampling time 4 ADC clock cycles */ +#define ADC_SAMPLETIME_9CYCLES ((uint32_t) ADC_SMPR3_SMP0_0) /*!< Sampling time 9 ADC clock cycles */ +#define ADC_SAMPLETIME_16CYCLES ((uint32_t) ADC_SMPR3_SMP0_1) /*!< Sampling time 16 ADC clock cycles */ +#define ADC_SAMPLETIME_24CYCLES ((uint32_t)(ADC_SMPR3_SMP0_1 | ADC_SMPR3_SMP0_0)) /*!< Sampling time 24 ADC clock cycles */ +#define ADC_SAMPLETIME_48CYCLES ((uint32_t) ADC_SMPR3_SMP0_2) /*!< Sampling time 48 ADC clock cycles */ +#define ADC_SAMPLETIME_96CYCLES ((uint32_t)(ADC_SMPR3_SMP0_2 | ADC_SMPR3_SMP0_0)) /*!< Sampling time 96 ADC clock cycles */ +#define ADC_SAMPLETIME_192CYCLES ((uint32_t)(ADC_SMPR3_SMP0_2 | ADC_SMPR3_SMP0_1)) /*!< Sampling time 192 ADC clock cycles */ +#define ADC_SAMPLETIME_384CYCLES ((uint32_t) ADC_SMPR3_SMP0) /*!< Sampling time 384 ADC clock cycles */ +/** + * @} + */ + +/** @defgroup ADC_sampling_times_all_channels ADC sampling times all channels + * @{ + */ +#define ADC_SAMPLETIME_ALLCHANNELS_SMPR3BIT2 \ + (ADC_SMPR3_SMP9_2 | ADC_SMPR3_SMP8_2 | ADC_SMPR3_SMP7_2 | ADC_SMPR3_SMP6_2 | \ + ADC_SMPR3_SMP5_2 | ADC_SMPR3_SMP4_2 | ADC_SMPR3_SMP3_2 | ADC_SMPR3_SMP2_2 | \ + ADC_SMPR3_SMP1_2 | ADC_SMPR3_SMP0_2) +#define ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT2 \ + (ADC_SMPR2_SMP19_2 | ADC_SMPR2_SMP18_2 | ADC_SMPR2_SMP17_2 | ADC_SMPR2_SMP16_2 | \ + ADC_SMPR2_SMP15_2 | ADC_SMPR2_SMP14_2 | ADC_SMPR2_SMP13_2 | ADC_SMPR2_SMP12_2 | \ + ADC_SMPR2_SMP11_2 | ADC_SMPR2_SMP10_2) +#if defined(STM32L100xB) || defined (STM32L151xB) || defined (STM32L152xB) || defined(STM32L100xBA) || defined (STM32L151xBA) || defined (STM32L152xBA) || defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) +#define ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT2 \ + (ADC_SMPR1_SMP26_2 | ADC_SMPR1_SMP25_2 | ADC_SMPR1_SMP24_2 | ADC_SMPR1_SMP23_2 | \ + ADC_SMPR1_SMP22_2 | ADC_SMPR1_SMP21_2 | ADC_SMPR1_SMP20_2) +#endif /* STM32L100xB || STM32L151xB || STM32L152xB || STM32L100xBA || STM32L151xBA || STM32L152xBA || STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC */ +#if defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) +#define ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT2 \ + (ADC_SMPR1_SMP29_2 | ADC_SMPR1_SMP28_2 | ADC_SMPR1_SMP27_2 | ADC_SMPR1_SMP26_2 | \ + ADC_SMPR1_SMP25_2 | ADC_SMPR1_SMP24_2 | ADC_SMPR1_SMP23_2 | ADC_SMPR1_SMP22_2 | \ + ADC_SMPR1_SMP21_2 | ADC_SMPR1_SMP20_2) +#define ADC_SAMPLETIME_ALLCHANNELS_SMPR0BIT2 \ + (ADC_SMPR0_SMP31_2 | ADC_SMPR0_SMP30_2 ) +#endif /* STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ + +#define ADC_SAMPLETIME_ALLCHANNELS_SMPR3BIT1 \ + (ADC_SMPR3_SMP9_1 | ADC_SMPR3_SMP8_1 | ADC_SMPR3_SMP7_1 | ADC_SMPR3_SMP6_1 | \ + ADC_SMPR3_SMP5_1 | ADC_SMPR3_SMP4_1 | ADC_SMPR3_SMP3_1 | ADC_SMPR3_SMP2_1 | \ + ADC_SMPR3_SMP1_1 | ADC_SMPR3_SMP0_1) +#define ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT1 \ + (ADC_SMPR2_SMP19_1 | ADC_SMPR2_SMP18_1 | ADC_SMPR2_SMP17_1 | ADC_SMPR2_SMP16_1 | \ + ADC_SMPR2_SMP15_1 | ADC_SMPR2_SMP14_1 | ADC_SMPR2_SMP13_1 | ADC_SMPR2_SMP12_1 | \ + ADC_SMPR2_SMP11_1 | ADC_SMPR2_SMP10_1) +#if defined(STM32L100xB) || defined (STM32L151xB) || defined (STM32L152xB) || defined(STM32L100xBA) || defined (STM32L151xBA) || defined (STM32L152xBA) || defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) +#define ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT1 \ + (ADC_SMPR1_SMP26_1 | ADC_SMPR1_SMP25_1 | ADC_SMPR1_SMP24_1 | ADC_SMPR1_SMP23_1 | \ + ADC_SMPR1_SMP22_1 | ADC_SMPR1_SMP21_1 | ADC_SMPR1_SMP20_1) +#endif /* STM32L100xB || STM32L151xB || STM32L152xB || STM32L100xBA || STM32L151xBA || STM32L152xBA || STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC */ +#if defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) +#define ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT1 \ + (ADC_SMPR1_SMP29_1 | ADC_SMPR1_SMP28_1 | ADC_SMPR1_SMP27_1 | ADC_SMPR1_SMP26_1 | \ + ADC_SMPR1_SMP25_1 | ADC_SMPR1_SMP24_1 | ADC_SMPR1_SMP23_1 | ADC_SMPR1_SMP22_1 | \ + ADC_SMPR1_SMP21_1 | ADC_SMPR1_SMP20_1) +#define ADC_SAMPLETIME_ALLCHANNELS_SMPR0BIT1 \ + (ADC_SMPR0_SMP31_1 | ADC_SMPR0_SMP30_1 ) +#endif /* STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ + +#define ADC_SAMPLETIME_ALLCHANNELS_SMPR3BIT0 \ + (ADC_SMPR3_SMP9_0 | ADC_SMPR3_SMP8_0 | ADC_SMPR3_SMP7_0 | ADC_SMPR3_SMP6_0 | \ + ADC_SMPR3_SMP5_0 | ADC_SMPR3_SMP4_0 | ADC_SMPR3_SMP3_0 | ADC_SMPR3_SMP2_0 | \ + ADC_SMPR3_SMP1_0 | ADC_SMPR3_SMP0_0) +#define ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT0 \ + (ADC_SMPR2_SMP19_0 | ADC_SMPR2_SMP18_0 | ADC_SMPR2_SMP17_0 | ADC_SMPR2_SMP16_0 | \ + ADC_SMPR2_SMP15_0 | ADC_SMPR2_SMP14_0 | ADC_SMPR2_SMP13_0 | ADC_SMPR2_SMP12_0 | \ + ADC_SMPR2_SMP11_0 | ADC_SMPR2_SMP10_0) +#if defined(STM32L100xB) || defined (STM32L151xB) || defined (STM32L152xB) || defined(STM32L100xBA) || defined (STM32L151xBA) || defined (STM32L152xBA) || defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) +#define ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT0 \ + (ADC_SMPR1_SMP26_0 | ADC_SMPR1_SMP25_0 | ADC_SMPR1_SMP24_0 | ADC_SMPR1_SMP23_0 | \ + ADC_SMPR1_SMP22_0 | ADC_SMPR1_SMP21_0 | ADC_SMPR1_SMP20_0) +#endif /* STM32L100xB || STM32L151xB || STM32L152xB || STM32L100xBA || STM32L151xBA || STM32L152xBA || STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC */ +#if defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) +#define ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT0 \ + (ADC_SMPR1_SMP29_0 | ADC_SMPR1_SMP28_0 | ADC_SMPR1_SMP27_0 | ADC_SMPR1_SMP26_0 | \ + ADC_SMPR1_SMP25_0 | ADC_SMPR1_SMP24_0 | ADC_SMPR1_SMP23_0 | ADC_SMPR1_SMP22_0 | \ + ADC_SMPR1_SMP21_0 | ADC_SMPR1_SMP20_0) +#define ADC_SAMPLETIME_ALLCHANNELS_SMPR0BIT0 \ + (ADC_SMPR0_SMP31_0 | ADC_SMPR0_SMP30_0 ) +#endif /* STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ +/** + * @} + */ + +/** @defgroup ADC_regular_rank ADC rank into regular group + * @{ + */ +#define ADC_REGULAR_RANK_1 ((uint32_t)0x00000001) +#define ADC_REGULAR_RANK_2 ((uint32_t)0x00000002) +#define ADC_REGULAR_RANK_3 ((uint32_t)0x00000003) +#define ADC_REGULAR_RANK_4 ((uint32_t)0x00000004) +#define ADC_REGULAR_RANK_5 ((uint32_t)0x00000005) +#define ADC_REGULAR_RANK_6 ((uint32_t)0x00000006) +#define ADC_REGULAR_RANK_7 ((uint32_t)0x00000007) +#define ADC_REGULAR_RANK_8 ((uint32_t)0x00000008) +#define ADC_REGULAR_RANK_9 ((uint32_t)0x00000009) +#define ADC_REGULAR_RANK_10 ((uint32_t)0x0000000A) +#define ADC_REGULAR_RANK_11 ((uint32_t)0x0000000B) +#define ADC_REGULAR_RANK_12 ((uint32_t)0x0000000C) +#define ADC_REGULAR_RANK_13 ((uint32_t)0x0000000D) +#define ADC_REGULAR_RANK_14 ((uint32_t)0x0000000E) +#define ADC_REGULAR_RANK_15 ((uint32_t)0x0000000F) +#define ADC_REGULAR_RANK_16 ((uint32_t)0x00000010) +#define ADC_REGULAR_RANK_17 ((uint32_t)0x00000011) +#define ADC_REGULAR_RANK_18 ((uint32_t)0x00000012) +#define ADC_REGULAR_RANK_19 ((uint32_t)0x00000013) +#define ADC_REGULAR_RANK_20 ((uint32_t)0x00000014) +#define ADC_REGULAR_RANK_21 ((uint32_t)0x00000015) +#define ADC_REGULAR_RANK_22 ((uint32_t)0x00000016) +#define ADC_REGULAR_RANK_23 ((uint32_t)0x00000017) +#define ADC_REGULAR_RANK_24 ((uint32_t)0x00000018) +#define ADC_REGULAR_RANK_25 ((uint32_t)0x00000019) +#define ADC_REGULAR_RANK_26 ((uint32_t)0x0000001A) +#define ADC_REGULAR_RANK_27 ((uint32_t)0x0000001B) +#if defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) +#define ADC_REGULAR_RANK_28 ((uint32_t)0x0000001C) +#endif /* STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ +/** + * @} + */ + +/** @defgroup ADC_analog_watchdog_mode ADC analog watchdog mode + * @{ + */ +#define ADC_ANALOGWATCHDOG_NONE ((uint32_t)0x00000000) +#define ADC_ANALOGWATCHDOG_SINGLE_REG ((uint32_t)(ADC_CR1_AWDSGL | ADC_CR1_AWDEN)) +#define ADC_ANALOGWATCHDOG_SINGLE_INJEC ((uint32_t)(ADC_CR1_AWDSGL | ADC_CR1_JAWDEN)) +#define ADC_ANALOGWATCHDOG_SINGLE_REGINJEC ((uint32_t)(ADC_CR1_AWDSGL | ADC_CR1_AWDEN | ADC_CR1_JAWDEN)) +#define ADC_ANALOGWATCHDOG_ALL_REG ((uint32_t) ADC_CR1_AWDEN) +#define ADC_ANALOGWATCHDOG_ALL_INJEC ((uint32_t) ADC_CR1_JAWDEN) +#define ADC_ANALOGWATCHDOG_ALL_REGINJEC ((uint32_t)(ADC_CR1_AWDEN | ADC_CR1_JAWDEN)) +/** + * @} + */ + +/** @defgroup ADC_conversion_group ADC conversion group + * @{ + */ +#define ADC_REGULAR_GROUP ((uint32_t)(ADC_FLAG_EOC)) +#define ADC_INJECTED_GROUP ((uint32_t)(ADC_FLAG_JEOC)) +#define ADC_REGULAR_INJECTED_GROUP ((uint32_t)(ADC_FLAG_EOC | ADC_FLAG_JEOC)) +/** + * @} + */ + +/** @defgroup ADC_Event_type ADC Event type + * @{ + */ +#define ADC_AWD_EVENT ((uint32_t)ADC_FLAG_AWD) /*!< ADC Analog watchdog event */ +#define ADC_OVR_EVENT ((uint32_t)ADC_FLAG_OVR) /*!< ADC overrun event */ +/** + * @} + */ + +/** @defgroup ADC_interrupts_definition ADC interrupts definition + * @{ + */ +#define ADC_IT_EOC ADC_CR1_EOCIE /*!< ADC End of Regular Conversion interrupt source */ +#define ADC_IT_JEOC ADC_CR1_JEOCIE /*!< ADC End of Injected Conversion interrupt source */ +#define ADC_IT_AWD ADC_CR1_AWDIE /*!< ADC Analog watchdog interrupt source */ +#define ADC_IT_OVR ADC_CR1_OVRIE /*!< ADC overrun interrupt source */ +/** + * @} + */ + +/** @defgroup ADC_flags_definition ADC flags definition + * @{ + */ +#define ADC_FLAG_AWD ADC_SR_AWD /*!< ADC Analog watchdog flag */ +#define ADC_FLAG_EOC ADC_SR_EOC /*!< ADC End of Regular conversion flag */ +#define ADC_FLAG_JEOC ADC_SR_JEOC /*!< ADC End of Injected conversion flag */ +#define ADC_FLAG_JSTRT ADC_SR_JSTRT /*!< ADC Injected group start flag */ +#define ADC_FLAG_STRT ADC_SR_STRT /*!< ADC Regular group start flag */ +#define ADC_FLAG_OVR ADC_SR_OVR /*!< ADC overrun flag */ +#define ADC_FLAG_ADONS ADC_SR_ADONS /*!< ADC ready status flag */ +#define ADC_FLAG_RCNR ADC_SR_RCNR /*!< ADC Regular group ready status flag */ +#define ADC_FLAG_JCNR ADC_SR_JCNR /*!< ADC Injected group ready status flag */ +/** + * @} + */ + +/** + * @} + */ + + +/* Private constants ---------------------------------------------------------*/ + +/** @addtogroup ADC_Private_Constants ADC Private Constants + * @{ + */ + +/* List of external triggers of regular group for ADC1: */ +/* (used internally by HAL driver. To not use into HAL structure parameters) */ + +/* External triggers of regular group for ADC1 */ +#define ADC_EXTERNALTRIG_T9_CC2 ((uint32_t) 0x00000000) +#define ADC_EXTERNALTRIG_T9_TRGO ((uint32_t)( ADC_CR2_EXTSEL_0)) +#define ADC_EXTERNALTRIG_T2_CC3 ((uint32_t)( ADC_CR2_EXTSEL_1 )) +#define ADC_EXTERNALTRIG_T2_CC2 ((uint32_t)( ADC_CR2_EXTSEL_1 | ADC_CR2_EXTSEL_0)) +#define ADC_EXTERNALTRIG_T3_TRGO ((uint32_t)( ADC_CR2_EXTSEL_2 )) +#define ADC_EXTERNALTRIG_T4_CC4 ((uint32_t)( ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_0)) +#define ADC_EXTERNALTRIG_T2_TRGO ((uint32_t)( ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_1 )) +#define ADC_EXTERNALTRIG_T3_CC1 ((uint32_t)( ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_1 | ADC_CR2_EXTSEL_0)) +#define ADC_EXTERNALTRIG_T3_CC3 ((uint32_t)(ADC_CR2_EXTSEL_3 )) +#define ADC_EXTERNALTRIG_T4_TRGO ((uint32_t)(ADC_CR2_EXTSEL_3 | ADC_CR2_EXTSEL_0)) +#define ADC_EXTERNALTRIG_T6_TRGO ((uint32_t)(ADC_CR2_EXTSEL_3 | ADC_CR2_EXTSEL_1 )) +#define ADC_EXTERNALTRIG_EXT_IT11 ((uint32_t)(ADC_CR2_EXTSEL_3 | ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_1 | ADC_CR2_EXTSEL_0)) + +/* Combination of all post-conversion flags bits: EOC/EOS, JEOC/JEOS, OVR, AWDx */ +#define ADC_FLAG_POSTCONV_ALL (ADC_FLAG_EOC | ADC_FLAG_JEOC | ADC_FLAG_AWD | \ + ADC_FLAG_OVR) + +/** + * @} + */ + + +/* Exported macro ------------------------------------------------------------*/ + +/** @defgroup ADC_Exported_Macros ADC Exported Macros + * @{ + */ +/* Macro for internal HAL driver usage, and possibly can be used into code of */ +/* final user. */ + +/** + * @brief Enable the ADC peripheral + * @param __HANDLE__: ADC handle + * @retval None + */ +#define __HAL_ADC_ENABLE(__HANDLE__) \ + (__HANDLE__)->Instance->CR2 |= ADC_CR2_ADON + +/** + * @brief Disable the ADC peripheral + * @param __HANDLE__: ADC handle + * @retval None + */ +#define __HAL_ADC_DISABLE(__HANDLE__) \ + (__HANDLE__)->Instance->CR2 &= ~ADC_CR2_ADON + +/** + * @brief Enable the ADC end of conversion interrupt. + * @param __HANDLE__: ADC handle + * @param __INTERRUPT__: ADC Interrupt + * This parameter can be any combination of the following values: + * @arg ADC_IT_EOC: ADC End of Regular Conversion interrupt source + * @arg ADC_IT_JEOC: ADC End of Injected Conversion interrupt source + * @arg ADC_IT_AWD: ADC Analog watchdog interrupt source + * @arg ADC_IT_OVR: ADC overrun interrupt source + * @retval None + */ +#define __HAL_ADC_ENABLE_IT(__HANDLE__, __INTERRUPT__) \ + (SET_BIT((__HANDLE__)->Instance->CR1, (__INTERRUPT__))) + +/** + * @brief Disable the ADC end of conversion interrupt. + * @param __HANDLE__: ADC handle + * @param __INTERRUPT__: ADC Interrupt + * This parameter can be any combination of the following values: + * @arg ADC_IT_EOC: ADC End of Regular Conversion interrupt source + * @arg ADC_IT_JEOC: ADC End of Injected Conversion interrupt source + * @arg ADC_IT_AWD: ADC Analog watchdog interrupt source + * @arg ADC_IT_OVR: ADC overrun interrupt source + * @retval None + */ +#define __HAL_ADC_DISABLE_IT(__HANDLE__, __INTERRUPT__) \ + (CLEAR_BIT((__HANDLE__)->Instance->CR1, (__INTERRUPT__))) + +/** @brief Checks if the specified ADC interrupt source is enabled or disabled. + * @param __HANDLE__: ADC handle + * @param __INTERRUPT__: ADC interrupt source to check + * This parameter can be any combination of the following values: + * @arg ADC_IT_EOC: ADC End of Regular Conversion interrupt source + * @arg ADC_IT_JEOC: ADC End of Injected Conversion interrupt source + * @arg ADC_IT_AWD: ADC Analog watchdog interrupt source + * @arg ADC_IT_OVR: ADC overrun interrupt source + * @retval State of interruption (SET or RESET) + */ +#define __HAL_ADC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) \ + (((__HANDLE__)->Instance->CR1 & (__INTERRUPT__)) == (__INTERRUPT__)) + +/** + * @brief Get the selected ADC's flag status. + * @param __HANDLE__: ADC handle + * @param __FLAG__: ADC flag + * This parameter can be any combination of the following values: + * @arg ADC_FLAG_STRT: ADC Regular group start flag + * @arg ADC_FLAG_JSTRT: ADC Injected group start flag + * @arg ADC_FLAG_EOC: ADC End of Regular conversion flag + * @arg ADC_FLAG_JEOC: ADC End of Injected conversion flag + * @arg ADC_FLAG_AWD: ADC Analog watchdog flag + * @arg ADC_FLAG_OVR: ADC overrun flag + * @arg ADC_FLAG_ADONS: ADC ready status flag + * @arg ADC_FLAG_RCNR: ADC Regular group ready status flag + * @arg ADC_FLAG_JCNR: ADC Injected group ready status flag + * @retval None + */ +#define __HAL_ADC_GET_FLAG(__HANDLE__, __FLAG__) \ + ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__)) + +/** + * @brief Clear the ADC's pending flags + * @param __HANDLE__: ADC handle + * @param __FLAG__: ADC flag + * @arg ADC_FLAG_STRT: ADC Regular group start flag + * @arg ADC_FLAG_JSTRT: ADC Injected group start flag + * @arg ADC_FLAG_EOC: ADC End of Regular conversion flag + * @arg ADC_FLAG_JEOC: ADC End of Injected conversion flag + * @arg ADC_FLAG_AWD: ADC Analog watchdog flag + * @arg ADC_FLAG_OVR: ADC overrun flag + * @arg ADC_FLAG_ADONS: ADC ready status flag + * @arg ADC_FLAG_RCNR: ADC Regular group ready status flag + * @arg ADC_FLAG_JCNR: ADC Injected group ready status flag + * @retval None + */ +#define __HAL_ADC_CLEAR_FLAG(__HANDLE__, __FLAG__) \ + (((__HANDLE__)->Instance->SR) = ~(__FLAG__)) + +/** @brief Reset ADC handle state + * @param __HANDLE__: ADC handle + * @retval None + */ +#define __HAL_ADC_RESET_HANDLE_STATE(__HANDLE__) \ + ((__HANDLE__)->State = HAL_ADC_STATE_RESET) + +/** + * @} + */ + +/* Private macro ------------------------------------------------------------*/ + +/** @defgroup ADC_Private_Macros ADC Private Macros + * @{ + */ +/* Macro reserved for internal HAL driver usage, not intended to be used in */ +/* code of final user. */ + +/** + * @brief Verification of ADC state: enabled or disabled + * @param __HANDLE__: ADC handle + * @retval SET (ADC enabled) or RESET (ADC disabled) + */ +#define ADC_IS_ENABLE(__HANDLE__) \ + ((( ((__HANDLE__)->Instance->SR & ADC_SR_ADONS) == ADC_SR_ADONS ) \ + ) ? SET : RESET) + +/** + * @brief Test if conversion trigger of regular group is software start + * or external trigger. + * @param __HANDLE__: ADC handle + * @retval SET (software start) or RESET (external trigger) + */ +#define ADC_IS_SOFTWARE_START_REGULAR(__HANDLE__) \ + (((__HANDLE__)->Instance->CR2 & ADC_CR2_EXTEN) == RESET) + +/** + * @brief Test if conversion trigger of injected group is software start + * or external trigger. + * @param __HANDLE__: ADC handle + * @retval SET (software start) or RESET (external trigger) + */ +#define ADC_IS_SOFTWARE_START_INJECTED(__HANDLE__) \ + (((__HANDLE__)->Instance->CR2 & ADC_CR2_JEXTEN) == RESET) + +/** + * @brief Simultaneously clears and sets specific bits of the handle State + * @note: ADC_STATE_CLR_SET() macro is merely aliased to generic macro MODIFY_REG(), + * the first parameter is the ADC handle State, the second parameter is the + * bit field to clear, the third and last parameter is the bit field to set. + * @retval None + */ +#define ADC_STATE_CLR_SET MODIFY_REG + +/** + * @brief Clear ADC error code (set it to error code: "no error") + * @param __HANDLE__: ADC handle + * @retval None + */ +#define ADC_CLEAR_ERRORCODE(__HANDLE__) \ + ((__HANDLE__)->ErrorCode = HAL_ADC_ERROR_NONE) + +/** + * @brief Set ADC number of ranks into regular channel sequence length. + * @param _NbrOfConversion_: Regular channel sequence length + * @retval None + */ +#define ADC_SQR1_L_SHIFT(_NbrOfConversion_) \ + (((_NbrOfConversion_) - (uint8_t)1) << POSITION_VAL(ADC_SQR1_L)) + +/** + * @brief Set the ADC's sample time for channel numbers between 10 and 18. + * @param _SAMPLETIME_: Sample time parameter. + * @param _CHANNELNB_: Channel number. + * @retval None + */ +#define ADC_SMPR2(_SAMPLETIME_, _CHANNELNB_) \ + ((_SAMPLETIME_) << (3 * ((_CHANNELNB_) - 10))) + +/** + * @brief Set the ADC's sample time for channel numbers between 0 and 9. + * @param _SAMPLETIME_: Sample time parameter. + * @param _CHANNELNB_: Channel number. + * @retval None + */ +#define ADC_SMPR3(_SAMPLETIME_, _CHANNELNB_) \ + ((_SAMPLETIME_) << (3 * (_CHANNELNB_))) + +/** + * @brief Set the selected regular channel rank for rank between 1 and 6. + * @param _CHANNELNB_: Channel number. + * @param _RANKNB_: Rank number. + * @retval None + */ +#define ADC_SQR5_RK(_CHANNELNB_, _RANKNB_) \ + ((_CHANNELNB_) << (5 * ((_RANKNB_) - 1))) + +/** + * @brief Set the selected regular channel rank for rank between 7 and 12. + * @param _CHANNELNB_: Channel number. + * @param _RANKNB_: Rank number. + * @retval None + */ +#define ADC_SQR4_RK(_CHANNELNB_, _RANKNB_) \ + ((_CHANNELNB_) << (5 * ((_RANKNB_) - 7))) + +/** + * @brief Set the selected regular channel rank for rank between 13 and 18. + * @param _CHANNELNB_: Channel number. + * @param _RANKNB_: Rank number. + * @retval None + */ +#define ADC_SQR3_RK(_CHANNELNB_, _RANKNB_) \ + ((_CHANNELNB_) << (5 * ((_RANKNB_) - 13))) + +/** + * @brief Set the selected regular channel rank for rank between 19 and 24. + * @param _CHANNELNB_: Channel number. + * @param _RANKNB_: Rank number. + * @retval None + */ +#define ADC_SQR2_RK(_CHANNELNB_, _RANKNB_) \ + ((_CHANNELNB_) << (5 * ((_RANKNB_) - 19))) + +/** + * @brief Set the selected regular channel rank for rank between 25 and 28. + * @param _CHANNELNB_: Channel number. + * @param _RANKNB_: Rank number. + * @retval None + */ +#define ADC_SQR1_RK(_CHANNELNB_, _RANKNB_) \ + ((_CHANNELNB_) << (5 * ((_RANKNB_) - 25))) + +/** + * @brief Set the injected sequence length. + * @param _JSQR_JL_: Sequence length. + * @retval None + */ +#define ADC_JSQR_JL_SHIFT(_JSQR_JL_) (((_JSQR_JL_) -1) << 20) + +/** + * @brief Set the selected injected channel rank + * Note: on STM32L1 devices, channel rank position in JSQR register + * is depending on total number of ranks selected into + * injected sequencer (ranks sequence starting from 4-JL) + * @param _CHANNELNB_: Channel number. + * @param _RANKNB_: Rank number. + * @param _JSQR_JL_: Sequence length. + * @retval None + */ +#define ADC_JSQR_RK_JL(_CHANNELNB_, _RANKNB_, _JSQR_JL_) \ + ((_CHANNELNB_) << (5 * ((4 - ((_JSQR_JL_) - (_RANKNB_))) - 1))) + +/** + * @brief Enable the ADC DMA continuous request. + * @param _DMACONTREQ_MODE_: DMA continuous request mode. + * @retval None + */ +#define ADC_CR2_DMACONTREQ(_DMACONTREQ_MODE_) \ + ((_DMACONTREQ_MODE_) << POSITION_VAL(ADC_CR2_DDS)) + +/** + * @brief Enable ADC continuous conversion mode. + * @param _CONTINUOUS_MODE_: Continuous mode. + * @retval None + */ +#define ADC_CR2_CONTINUOUS(_CONTINUOUS_MODE_) \ + ((_CONTINUOUS_MODE_) << POSITION_VAL(ADC_CR2_CONT)) + +/** + * @brief Configures the number of discontinuous conversions for the regular group channels. + * @param _NBR_DISCONTINUOUS_CONV_: Number of discontinuous conversions. + * @retval None + */ +#define ADC_CR1_DISCONTINUOUS_NUM(_NBR_DISCONTINUOUS_CONV_) \ + (((_NBR_DISCONTINUOUS_CONV_) - 1) << POSITION_VAL(ADC_CR1_DISCNUM)) + +/** + * @brief Enable ADC scan mode to convert multiple ranks with sequencer. + * @param _SCAN_MODE_: Scan conversion mode. + * @retval None + */ +/* Note: Scan mode is compared to ENABLE for legacy purpose, this parameter */ +/* is equivalent to ADC_SCAN_ENABLE. */ +#define ADC_CR1_SCAN_SET(_SCAN_MODE_) \ + (( ((_SCAN_MODE_) == ADC_SCAN_ENABLE) || ((_SCAN_MODE_) == ENABLE) \ + )? (ADC_SCAN_ENABLE) : (ADC_SCAN_DISABLE) \ + ) + + +#define IS_ADC_CLOCKPRESCALER(ADC_CLOCK) (((ADC_CLOCK) == ADC_CLOCK_ASYNC_DIV1) || \ + ((ADC_CLOCK) == ADC_CLOCK_ASYNC_DIV2) || \ + ((ADC_CLOCK) == ADC_CLOCK_ASYNC_DIV4) ) + +#define IS_ADC_RESOLUTION(RESOLUTION) (((RESOLUTION) == ADC_RESOLUTION_12B) || \ + ((RESOLUTION) == ADC_RESOLUTION_10B) || \ + ((RESOLUTION) == ADC_RESOLUTION_8B) || \ + ((RESOLUTION) == ADC_RESOLUTION_6B) ) + +#define IS_ADC_RESOLUTION_8_6_BITS(RESOLUTION) (((RESOLUTION) == ADC_RESOLUTION_8B) || \ + ((RESOLUTION) == ADC_RESOLUTION_6B) ) + +#define IS_ADC_DATA_ALIGN(ALIGN) (((ALIGN) == ADC_DATAALIGN_RIGHT) || \ + ((ALIGN) == ADC_DATAALIGN_LEFT) ) + +#define IS_ADC_SCAN_MODE(SCAN_MODE) (((SCAN_MODE) == ADC_SCAN_DISABLE) || \ + ((SCAN_MODE) == ADC_SCAN_ENABLE) ) + +#define IS_ADC_EXTTRIG_EDGE(EDGE) (((EDGE) == ADC_EXTERNALTRIGCONVEDGE_NONE) || \ + ((EDGE) == ADC_EXTERNALTRIGCONVEDGE_RISING) || \ + ((EDGE) == ADC_EXTERNALTRIGCONVEDGE_FALLING) || \ + ((EDGE) == ADC_EXTERNALTRIGCONVEDGE_RISINGFALLING) ) + +#define IS_ADC_EXTTRIG(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_CC3) || \ + ((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_CC2) || \ + ((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_TRGO) || \ + ((REGTRIG) == ADC_EXTERNALTRIGCONV_T3_CC1) || \ + ((REGTRIG) == ADC_EXTERNALTRIGCONV_T3_CC3) || \ + ((REGTRIG) == ADC_EXTERNALTRIGCONV_T3_TRGO) || \ + ((REGTRIG) == ADC_EXTERNALTRIGCONV_T4_CC4) || \ + ((REGTRIG) == ADC_EXTERNALTRIGCONV_T4_TRGO) || \ + ((REGTRIG) == ADC_EXTERNALTRIGCONV_T6_TRGO) || \ + ((REGTRIG) == ADC_EXTERNALTRIGCONV_T9_CC2) || \ + ((REGTRIG) == ADC_EXTERNALTRIGCONV_T9_TRGO) || \ + ((REGTRIG) == ADC_EXTERNALTRIGCONV_EXT_IT11) || \ + ((REGTRIG) == ADC_SOFTWARE_START) ) + +#define IS_ADC_EOC_SELECTION(EOC_SELECTION) (((EOC_SELECTION) == ADC_EOC_SINGLE_CONV) || \ + ((EOC_SELECTION) == ADC_EOC_SEQ_CONV) ) + +#define IS_ADC_AUTOWAIT(AUTOWAIT) (((AUTOWAIT) == ADC_AUTOWAIT_DISABLE) || \ + ((AUTOWAIT) == ADC_AUTOWAIT_UNTIL_DATA_READ) || \ + ((AUTOWAIT) == ADC_AUTOWAIT_7_APBCLOCKCYCLES) || \ + ((AUTOWAIT) == ADC_AUTOWAIT_15_APBCLOCKCYCLES) || \ + ((AUTOWAIT) == ADC_AUTOWAIT_31_APBCLOCKCYCLES) || \ + ((AUTOWAIT) == ADC_AUTOWAIT_63_APBCLOCKCYCLES) || \ + ((AUTOWAIT) == ADC_AUTOWAIT_127_APBCLOCKCYCLES) || \ + ((AUTOWAIT) == ADC_AUTOWAIT_255_APBCLOCKCYCLES) ) + +#define IS_ADC_AUTOPOWEROFF(AUTOPOWEROFF) (((AUTOPOWEROFF) == ADC_AUTOPOWEROFF_DISABLE) || \ + ((AUTOPOWEROFF) == ADC_AUTOPOWEROFF_IDLE_PHASE) || \ + ((AUTOPOWEROFF) == ADC_AUTOPOWEROFF_DELAY_PHASE) || \ + ((AUTOPOWEROFF) == ADC_AUTOPOWEROFF_IDLE_DELAY_PHASES) ) + +#if defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) + +#define IS_ADC_CHANNELSBANK(BANK) (((BANK) == ADC_CHANNELS_BANK_A) || \ + ((BANK) == ADC_CHANNELS_BANK_B) ) +#else + +#define IS_ADC_CHANNELSBANK(BANK) (((BANK) == ADC_CHANNELS_BANK_A)) +#endif /* STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ + +#if defined(STM32L100xB) || defined (STM32L151xB) || defined (STM32L152xB) || defined(STM32L100xBA) || defined (STM32L151xBA) || defined (STM32L152xBA) || defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) +#define IS_ADC_CHANNEL(CHANNEL) (((CHANNEL) == ADC_CHANNEL_0) || \ + ((CHANNEL) == ADC_CHANNEL_1) || \ + ((CHANNEL) == ADC_CHANNEL_2) || \ + ((CHANNEL) == ADC_CHANNEL_3) || \ + ((CHANNEL) == ADC_CHANNEL_4) || \ + ((CHANNEL) == ADC_CHANNEL_5) || \ + ((CHANNEL) == ADC_CHANNEL_6) || \ + ((CHANNEL) == ADC_CHANNEL_7) || \ + ((CHANNEL) == ADC_CHANNEL_8) || \ + ((CHANNEL) == ADC_CHANNEL_9) || \ + ((CHANNEL) == ADC_CHANNEL_10) || \ + ((CHANNEL) == ADC_CHANNEL_11) || \ + ((CHANNEL) == ADC_CHANNEL_12) || \ + ((CHANNEL) == ADC_CHANNEL_13) || \ + ((CHANNEL) == ADC_CHANNEL_14) || \ + ((CHANNEL) == ADC_CHANNEL_15) || \ + ((CHANNEL) == ADC_CHANNEL_16) || \ + ((CHANNEL) == ADC_CHANNEL_17) || \ + ((CHANNEL) == ADC_CHANNEL_18) || \ + ((CHANNEL) == ADC_CHANNEL_19) || \ + ((CHANNEL) == ADC_CHANNEL_20) || \ + ((CHANNEL) == ADC_CHANNEL_21) || \ + ((CHANNEL) == ADC_CHANNEL_22) || \ + ((CHANNEL) == ADC_CHANNEL_23) || \ + ((CHANNEL) == ADC_CHANNEL_24) || \ + ((CHANNEL) == ADC_CHANNEL_25) || \ + ((CHANNEL) == ADC_CHANNEL_26) ) +#endif /* STM32L100xB || STM32L151xB || STM32L152xB || STM32L100xBA || STM32L151xBA || STM32L152xBA || STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC */ +#if defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) +#define IS_ADC_CHANNEL(CHANNEL) (((CHANNEL) == ADC_CHANNEL_0) || \ + ((CHANNEL) == ADC_CHANNEL_1) || \ + ((CHANNEL) == ADC_CHANNEL_2) || \ + ((CHANNEL) == ADC_CHANNEL_3) || \ + ((CHANNEL) == ADC_CHANNEL_4) || \ + ((CHANNEL) == ADC_CHANNEL_5) || \ + ((CHANNEL) == ADC_CHANNEL_6) || \ + ((CHANNEL) == ADC_CHANNEL_7) || \ + ((CHANNEL) == ADC_CHANNEL_8) || \ + ((CHANNEL) == ADC_CHANNEL_9) || \ + ((CHANNEL) == ADC_CHANNEL_10) || \ + ((CHANNEL) == ADC_CHANNEL_11) || \ + ((CHANNEL) == ADC_CHANNEL_12) || \ + ((CHANNEL) == ADC_CHANNEL_13) || \ + ((CHANNEL) == ADC_CHANNEL_14) || \ + ((CHANNEL) == ADC_CHANNEL_15) || \ + ((CHANNEL) == ADC_CHANNEL_16) || \ + ((CHANNEL) == ADC_CHANNEL_17) || \ + ((CHANNEL) == ADC_CHANNEL_18) || \ + ((CHANNEL) == ADC_CHANNEL_19) || \ + ((CHANNEL) == ADC_CHANNEL_20) || \ + ((CHANNEL) == ADC_CHANNEL_21) || \ + ((CHANNEL) == ADC_CHANNEL_22) || \ + ((CHANNEL) == ADC_CHANNEL_23) || \ + ((CHANNEL) == ADC_CHANNEL_24) || \ + ((CHANNEL) == ADC_CHANNEL_25) || \ + ((CHANNEL) == ADC_CHANNEL_26) || \ + ((CHANNEL) == ADC_CHANNEL_27) || \ + ((CHANNEL) == ADC_CHANNEL_28) || \ + ((CHANNEL) == ADC_CHANNEL_29) || \ + ((CHANNEL) == ADC_CHANNEL_30) || \ + ((CHANNEL) == ADC_CHANNEL_31) ) +#endif /* STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ + +#define IS_ADC_SAMPLE_TIME(TIME) (((TIME) == ADC_SAMPLETIME_4CYCLES) || \ + ((TIME) == ADC_SAMPLETIME_9CYCLES) || \ + ((TIME) == ADC_SAMPLETIME_16CYCLES) || \ + ((TIME) == ADC_SAMPLETIME_24CYCLES) || \ + ((TIME) == ADC_SAMPLETIME_48CYCLES) || \ + ((TIME) == ADC_SAMPLETIME_96CYCLES) || \ + ((TIME) == ADC_SAMPLETIME_192CYCLES) || \ + ((TIME) == ADC_SAMPLETIME_384CYCLES) ) + +#if defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) + +#define IS_ADC_REGULAR_RANK(CHANNEL) (((CHANNEL) == ADC_REGULAR_RANK_1 ) || \ + ((CHANNEL) == ADC_REGULAR_RANK_2 ) || \ + ((CHANNEL) == ADC_REGULAR_RANK_3 ) || \ + ((CHANNEL) == ADC_REGULAR_RANK_4 ) || \ + ((CHANNEL) == ADC_REGULAR_RANK_5 ) || \ + ((CHANNEL) == ADC_REGULAR_RANK_6 ) || \ + ((CHANNEL) == ADC_REGULAR_RANK_7 ) || \ + ((CHANNEL) == ADC_REGULAR_RANK_8 ) || \ + ((CHANNEL) == ADC_REGULAR_RANK_9 ) || \ + ((CHANNEL) == ADC_REGULAR_RANK_10) || \ + ((CHANNEL) == ADC_REGULAR_RANK_11) || \ + ((CHANNEL) == ADC_REGULAR_RANK_12) || \ + ((CHANNEL) == ADC_REGULAR_RANK_13) || \ + ((CHANNEL) == ADC_REGULAR_RANK_14) || \ + ((CHANNEL) == ADC_REGULAR_RANK_15) || \ + ((CHANNEL) == ADC_REGULAR_RANK_16) || \ + ((CHANNEL) == ADC_REGULAR_RANK_17) || \ + ((CHANNEL) == ADC_REGULAR_RANK_18) || \ + ((CHANNEL) == ADC_REGULAR_RANK_19) || \ + ((CHANNEL) == ADC_REGULAR_RANK_20) || \ + ((CHANNEL) == ADC_REGULAR_RANK_21) || \ + ((CHANNEL) == ADC_REGULAR_RANK_22) || \ + ((CHANNEL) == ADC_REGULAR_RANK_23) || \ + ((CHANNEL) == ADC_REGULAR_RANK_24) || \ + ((CHANNEL) == ADC_REGULAR_RANK_25) || \ + ((CHANNEL) == ADC_REGULAR_RANK_26) || \ + ((CHANNEL) == ADC_REGULAR_RANK_27) || \ + ((CHANNEL) == ADC_REGULAR_RANK_28) ) +#else + +#define IS_ADC_REGULAR_RANK(CHANNEL) (((CHANNEL) == ADC_REGULAR_RANK_1 ) || \ + ((CHANNEL) == ADC_REGULAR_RANK_2 ) || \ + ((CHANNEL) == ADC_REGULAR_RANK_3 ) || \ + ((CHANNEL) == ADC_REGULAR_RANK_4 ) || \ + ((CHANNEL) == ADC_REGULAR_RANK_5 ) || \ + ((CHANNEL) == ADC_REGULAR_RANK_6 ) || \ + ((CHANNEL) == ADC_REGULAR_RANK_7 ) || \ + ((CHANNEL) == ADC_REGULAR_RANK_8 ) || \ + ((CHANNEL) == ADC_REGULAR_RANK_9 ) || \ + ((CHANNEL) == ADC_REGULAR_RANK_10) || \ + ((CHANNEL) == ADC_REGULAR_RANK_11) || \ + ((CHANNEL) == ADC_REGULAR_RANK_12) || \ + ((CHANNEL) == ADC_REGULAR_RANK_13) || \ + ((CHANNEL) == ADC_REGULAR_RANK_14) || \ + ((CHANNEL) == ADC_REGULAR_RANK_15) || \ + ((CHANNEL) == ADC_REGULAR_RANK_16) || \ + ((CHANNEL) == ADC_REGULAR_RANK_17) || \ + ((CHANNEL) == ADC_REGULAR_RANK_18) || \ + ((CHANNEL) == ADC_REGULAR_RANK_19) || \ + ((CHANNEL) == ADC_REGULAR_RANK_20) || \ + ((CHANNEL) == ADC_REGULAR_RANK_21) || \ + ((CHANNEL) == ADC_REGULAR_RANK_22) || \ + ((CHANNEL) == ADC_REGULAR_RANK_23) || \ + ((CHANNEL) == ADC_REGULAR_RANK_24) || \ + ((CHANNEL) == ADC_REGULAR_RANK_25) || \ + ((CHANNEL) == ADC_REGULAR_RANK_26) || \ + ((CHANNEL) == ADC_REGULAR_RANK_27) ) +#endif /* STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ + +#define IS_ADC_ANALOG_WATCHDOG_MODE(WATCHDOG) (((WATCHDOG) == ADC_ANALOGWATCHDOG_NONE) || \ + ((WATCHDOG) == ADC_ANALOGWATCHDOG_SINGLE_REG) || \ + ((WATCHDOG) == ADC_ANALOGWATCHDOG_SINGLE_INJEC) || \ + ((WATCHDOG) == ADC_ANALOGWATCHDOG_SINGLE_REGINJEC) || \ + ((WATCHDOG) == ADC_ANALOGWATCHDOG_ALL_REG) || \ + ((WATCHDOG) == ADC_ANALOGWATCHDOG_ALL_INJEC) || \ + ((WATCHDOG) == ADC_ANALOGWATCHDOG_ALL_REGINJEC) ) + +#define IS_ADC_CONVERSION_GROUP(CONVERSION) (((CONVERSION) == ADC_REGULAR_GROUP) || \ + ((CONVERSION) == ADC_INJECTED_GROUP) || \ + ((CONVERSION) == ADC_REGULAR_INJECTED_GROUP) ) + +#define IS_ADC_EVENT_TYPE(EVENT) (((EVENT) == ADC_AWD_EVENT) || \ + ((EVENT) == ADC_FLAG_OVR) ) + +/** + * @brief Verify that a ADC data is within range corresponding to + * ADC resolution. + * @param __RESOLUTION__: ADC resolution (12, 10, 8 or 6 bits). + * @param __ADC_DATA__: value checked against the resolution. + * @retval SET: ADC data is within range corresponding to ADC resolution + * RESET: ADC data is not within range corresponding to ADC resolution + * + */ +#define IS_ADC_RANGE(__RESOLUTION__, __ADC_DATA__) \ + ((((__RESOLUTION__) == ADC_RESOLUTION_12B) && ((__ADC_DATA__) <= ((uint32_t)0x0FFF))) || \ + (((__RESOLUTION__) == ADC_RESOLUTION_10B) && ((__ADC_DATA__) <= ((uint32_t)0x03FF))) || \ + (((__RESOLUTION__) == ADC_RESOLUTION_8B) && ((__ADC_DATA__) <= ((uint32_t)0x00FF))) || \ + (((__RESOLUTION__) == ADC_RESOLUTION_6B) && ((__ADC_DATA__) <= ((uint32_t)0x003F))) ) + + +#if defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) +#define IS_ADC_REGULAR_NB_CONV(LENGTH) (((LENGTH) >= ((uint32_t)1)) && ((LENGTH) <= ((uint32_t)28))) +#else +#define IS_ADC_REGULAR_NB_CONV(LENGTH) (((LENGTH) >= ((uint32_t)1)) && ((LENGTH) <= ((uint32_t)27))) +#endif + +#define IS_ADC_REGULAR_DISCONT_NUMBER(NUMBER) (((NUMBER) >= ((uint32_t)1)) && ((NUMBER) <= ((uint32_t)8))) + +/** + * @} + */ + + +/* Include ADC HAL Extension module */ +#include "stm32l1xx_hal_adc_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup ADC_Exported_Functions + * @{ + */ + +/** @addtogroup ADC_Exported_Functions_Group1 + * @{ + */ + + +/* Initialization and de-initialization functions **********************************/ +HAL_StatusTypeDef HAL_ADC_Init(ADC_HandleTypeDef* hadc); +HAL_StatusTypeDef HAL_ADC_DeInit(ADC_HandleTypeDef *hadc); +void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc); +void HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc); +/** + * @} + */ + +/* IO operation functions *****************************************************/ + +/** @addtogroup ADC_Exported_Functions_Group2 + * @{ + */ + + +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_ADC_Start(ADC_HandleTypeDef* hadc); +HAL_StatusTypeDef HAL_ADC_Stop(ADC_HandleTypeDef* hadc); +HAL_StatusTypeDef HAL_ADC_PollForConversion(ADC_HandleTypeDef* hadc, uint32_t Timeout); +HAL_StatusTypeDef HAL_ADC_PollForEvent(ADC_HandleTypeDef* hadc, uint32_t EventType, uint32_t Timeout); + +/* Non-blocking mode: Interruption */ +HAL_StatusTypeDef HAL_ADC_Start_IT(ADC_HandleTypeDef* hadc); +HAL_StatusTypeDef HAL_ADC_Stop_IT(ADC_HandleTypeDef* hadc); + +/* Non-blocking mode: DMA */ +HAL_StatusTypeDef HAL_ADC_Start_DMA(ADC_HandleTypeDef* hadc, uint32_t* pData, uint32_t Length); +HAL_StatusTypeDef HAL_ADC_Stop_DMA(ADC_HandleTypeDef* hadc); + +/* ADC retrieve conversion value intended to be used with polling or interruption */ +uint32_t HAL_ADC_GetValue(ADC_HandleTypeDef* hadc); + +/* ADC IRQHandler and Callbacks used in non-blocking modes (Interruption and DMA) */ +void HAL_ADC_IRQHandler(ADC_HandleTypeDef* hadc); +void HAL_ADC_ConvCpltCallback(ADC_HandleTypeDef* hadc); +void HAL_ADC_ConvHalfCpltCallback(ADC_HandleTypeDef* hadc); +void HAL_ADC_LevelOutOfWindowCallback(ADC_HandleTypeDef* hadc); +void HAL_ADC_ErrorCallback(ADC_HandleTypeDef *hadc); +/** + * @} + */ + + +/* Peripheral Control functions ***********************************************/ +/** @addtogroup ADC_Exported_Functions_Group3 + * @{ + */ +HAL_StatusTypeDef HAL_ADC_ConfigChannel(ADC_HandleTypeDef* hadc, ADC_ChannelConfTypeDef* sConfig); +HAL_StatusTypeDef HAL_ADC_AnalogWDGConfig(ADC_HandleTypeDef* hadc, ADC_AnalogWDGConfTypeDef* AnalogWDGConfig); +/** + * @} + */ + + +/* Peripheral State functions *************************************************/ +/** @addtogroup ADC_Exported_Functions_Group4 + * @{ + */ +uint32_t HAL_ADC_GetState(ADC_HandleTypeDef* hadc); +uint32_t HAL_ADC_GetError(ADC_HandleTypeDef *hadc); +/** + * @} + */ + + +/** + * @} + */ + + +/* Internal HAL driver functions **********************************************/ +/** @addtogroup ADC_Private_Functions + * @{ + */ + +HAL_StatusTypeDef ADC_Enable(ADC_HandleTypeDef* hadc); +HAL_StatusTypeDef ADC_ConversionStop_Disable(ADC_HandleTypeDef* hadc); +/** + * @} + */ + + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + + +#endif /* __STM32L1xx_HAL_ADC_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_adc_ex.h b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_adc_ex.h new file mode 100755 index 0000000..b8ea87b --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_adc_ex.h @@ -0,0 +1,590 @@ +/** + ****************************************************************************** + * @file stm32l1xx_hal_adc_ex.h + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief Header file of ADC HAL Extension module. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L1xx_HAL_ADC_EX_H +#define __STM32L1xx_HAL_ADC_EX_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_hal_def.h" + +/** @addtogroup STM32L1xx_HAL_Driver + * @{ + */ + +/** @addtogroup ADCEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup ADCEx_Exported_Types ADCEx Exported Types + * @{ + */ + +/** + * @brief ADC Configuration injected Channel structure definition + * @note Parameters of this structure are shared within 2 scopes: + * - Scope channel: InjectedChannel, InjectedRank, InjectedSamplingTime, InjectedOffset + * - Scope injected group (affects all channels of injected group): InjectedNbrOfConversion, InjectedDiscontinuousConvMode, + * AutoInjectedConv, ExternalTrigInjecConvEdge, ExternalTrigInjecConv. + * @note The setting of these parameters with function HAL_ADCEx_InjectedConfigChannel() is conditioned to ADC state. + * ADC state can be either: + * - For all parameters: ADC disabled + * - For all except parameters 'InjectedDiscontinuousConvMode' and 'AutoInjectedConv': ADC enabled without conversion on going on injected group. + * - For parameters 'ExternalTrigInjecConv' and 'ExternalTrigInjecConvEdge': ADC enabled, even with conversion on going on injected group. + */ +typedef struct +{ + uint32_t InjectedChannel; /*!< Selection of ADC channel to configure + This parameter can be a value of @ref ADC_channels + Note: Depending on devices, some channels may not be available on package pins. Refer to device datasheet for channels availability. */ + uint32_t InjectedRank; /*!< Rank in the injected group sequencer + This parameter must be a value of @ref ADCEx_injected_rank + Note: In case of need to disable a channel or change order of conversion sequencer, rank containing a previous channel setting can be overwritten by the new channel setting (or parameter number of conversions can be adjusted) */ + uint32_t InjectedSamplingTime; /*!< Sampling time value to be set for the selected channel. + Unit: ADC clock cycles + Conversion time is the addition of sampling time and processing time (12 ADC clock cycles at ADC resolution 12 bits, 11 cycles at 10 bits, 9 cycles at 8 bits, 7 cycles at 6 bits). + This parameter can be a value of @ref ADC_sampling_times + Caution: This parameter updates the parameter property of the channel, that can be used into regular and/or injected groups. + If this same channel has been previously configured in the other group (regular/injected), it will be updated to last setting. + Note: In case of usage of internal measurement channels (VrefInt/Vbat/TempSensor), + sampling time constraints must be respected (sampling time can be adjusted in function of ADC clock frequency and sampling time setting) + Refer to device datasheet for timings values, parameters TS_vrefint, TS_temp (values rough order: 4us min). */ + uint32_t InjectedOffset; /*!< Defines the offset to be subtracted from the raw converted data (for channels set on injected group only). + Offset value must be a positive number. + Depending of ADC resolution selected (12, 10, 8 or 6 bits), + this parameter must be a number between Min_Data = 0x000 and Max_Data = 0xFFF, 0x3FF, 0xFF or 0x3F respectively. */ + uint32_t InjectedNbrOfConversion; /*!< Specifies the number of ranks that will be converted within the injected group sequencer. + To use the injected group sequencer and convert several ranks, parameter 'ScanConvMode' must be enabled. + This parameter must be a number between Min_Data = 1 and Max_Data = 4. + Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to + configure a channel on injected group can impact the configuration of other channels previously set. */ + uint32_t InjectedDiscontinuousConvMode; /*!< Specifies whether the conversions sequence of injected group is performed in Complete-sequence/Discontinuous-sequence (main sequence subdivided in successive parts). + Discontinuous mode is used only if sequencer is enabled (parameter 'ScanConvMode'). If sequencer is disabled, this parameter is discarded. + Discontinuous mode can be enabled only if continuous mode is disabled. If continuous mode is enabled, this parameter setting is discarded. + This parameter can be set to ENABLE or DISABLE. + Note: For injected group, number of discontinuous ranks increment is fixed to one-by-one. + Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to + configure a channel on injected group can impact the configuration of other channels previously set. */ + uint32_t AutoInjectedConv; /*!< Enables or disables the selected ADC automatic injected group conversion after regular one + This parameter can be set to ENABLE or DISABLE. + Note: To use Automatic injected conversion, discontinuous mode must be disabled ('DiscontinuousConvMode' and 'InjectedDiscontinuousConvMode' set to DISABLE) + Note: To use Automatic injected conversion, injected group external triggers must be disabled ('ExternalTrigInjecConv' set to ADC_SOFTWARE_START) + Note: In case of DMA used with regular group: if DMA configured in normal mode (single shot) JAUTO will be stopped upon DMA transfer complete. + To maintain JAUTO always enabled, DMA must be configured in circular mode. + Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to + configure a channel on injected group can impact the configuration of other channels previously set. */ + uint32_t ExternalTrigInjecConv; /*!< Selects the external event used to trigger the conversion start of injected group. + If set to ADC_INJECTED_SOFTWARE_START, external triggers are disabled. + If set to external trigger source, triggering is on event rising edge. + This parameter can be a value of @ref ADCEx_External_trigger_source_Injected + Note: This parameter must be modified when ADC is disabled (before ADC start conversion or after ADC stop conversion). + If ADC is enabled, this parameter setting is bypassed without error reporting (as it can be the expected behaviour in case of another parameter update on the fly) + Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to + configure a channel on injected group can impact the configuration of other channels previously set. */ + uint32_t ExternalTrigInjecConvEdge; /*!< Selects the external trigger edge of injected group. + This parameter can be a value of @ref ADCEx_External_trigger_edge_Injected. + If trigger is set to ADC_INJECTED_SOFTWARE_START, this parameter is discarded. + Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to + configure a channel on injected group can impact the configuration of other channels previously set. */ +}ADC_InjectionConfTypeDef; +/** + * @} + */ + + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup ADCEx_Exported_Constants ADCEx Exported Constants + * @{ + */ + +/** @defgroup ADCEx_injected_rank ADCEx rank into injected group + * @{ + */ +#define ADC_INJECTED_RANK_1 ((uint32_t)0x00000001) +#define ADC_INJECTED_RANK_2 ((uint32_t)0x00000002) +#define ADC_INJECTED_RANK_3 ((uint32_t)0x00000003) +#define ADC_INJECTED_RANK_4 ((uint32_t)0x00000004) +/** + * @} + */ + +/** @defgroup ADCEx_External_trigger_edge_Injected ADCEx external trigger enable for injected group + * @{ + */ +#define ADC_EXTERNALTRIGINJECCONV_EDGE_NONE ((uint32_t)0x00000000) +#define ADC_EXTERNALTRIGINJECCONV_EDGE_RISING ((uint32_t)ADC_CR2_JEXTEN_0) +#define ADC_EXTERNALTRIGINJECCONV_EDGE_FALLING ((uint32_t)ADC_CR2_JEXTEN_1) +#define ADC_EXTERNALTRIGINJECCONV_EDGE_RISINGFALLING ((uint32_t)ADC_CR2_JEXTEN) +/** + * @} + */ + +/** @defgroup ADCEx_External_trigger_source_Injected ADCEx External trigger source Injected + * @{ + */ +/* External triggers for injected groups of ADC1 */ +#define ADC_EXTERNALTRIGINJECCONV_T2_CC1 ADC_EXTERNALTRIGINJEC_T2_CC1 +#define ADC_EXTERNALTRIGINJECCONV_T2_TRGO ADC_EXTERNALTRIGINJEC_T2_TRGO +#define ADC_EXTERNALTRIGINJECCONV_T3_CC4 ADC_EXTERNALTRIGINJEC_T3_CC4 +#define ADC_EXTERNALTRIGINJECCONV_T4_TRGO ADC_EXTERNALTRIGINJEC_T4_TRGO +#define ADC_EXTERNALTRIGINJECCONV_T4_CC1 ADC_EXTERNALTRIGINJEC_T4_CC1 +#define ADC_EXTERNALTRIGINJECCONV_T4_CC2 ADC_EXTERNALTRIGINJEC_T4_CC2 +#define ADC_EXTERNALTRIGINJECCONV_T4_CC3 ADC_EXTERNALTRIGINJEC_T4_CC3 +#define ADC_EXTERNALTRIGINJECCONV_T7_TRGO ADC_EXTERNALTRIGINJEC_T7_TRGO +#define ADC_EXTERNALTRIGINJECCONV_T9_CC1 ADC_EXTERNALTRIGINJEC_T9_CC1 +#define ADC_EXTERNALTRIGINJECCONV_T9_TRGO ADC_EXTERNALTRIGINJEC_T9_TRGO +#define ADC_EXTERNALTRIGINJECCONV_T10_CC1 ADC_EXTERNALTRIGINJEC_T10_CC1 +#define ADC_EXTERNALTRIGINJECCONV_EXT_IT15 ADC_EXTERNALTRIGINJEC_EXT_IT15 +#define ADC_INJECTED_SOFTWARE_START ((uint32_t)0x00000010) +/** + * @} + */ + +/** + * @} + */ + + +/* Private constants ---------------------------------------------------------*/ + +/** @addtogroup ADCEx_Private_Constants ADCEx Private Constants + * @{ + */ + +/** @defgroup ADCEx_Internal_HAL_driver_Ext_trig_src_Injected ADCEx Internal HAL driver Ext trig src Injected + * @{ + */ + +/* List of external triggers of injected group for ADC1: */ +/* (used internally by HAL driver. To not use into HAL structure parameters) */ +#define ADC_EXTERNALTRIGINJEC_T9_CC1 ((uint32_t) 0x00000000) +#define ADC_EXTERNALTRIGINJEC_T9_TRGO ((uint32_t)( ADC_CR2_JEXTSEL_0)) +#define ADC_EXTERNALTRIGINJEC_T2_TRGO ((uint32_t)( ADC_CR2_JEXTSEL_1 )) +#define ADC_EXTERNALTRIGINJEC_T2_CC1 ((uint32_t)( ADC_CR2_JEXTSEL_1 | ADC_CR2_JEXTSEL_0)) +#define ADC_EXTERNALTRIGINJEC_T3_CC4 ((uint32_t)( ADC_CR2_JEXTSEL_2 )) +#define ADC_EXTERNALTRIGINJEC_T4_TRGO ((uint32_t)( ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_0)) +#define ADC_EXTERNALTRIGINJEC_T4_CC1 ((uint32_t)( ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_1 )) +#define ADC_EXTERNALTRIGINJEC_T4_CC2 ((uint32_t)( ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_1 | ADC_CR2_JEXTSEL_0)) +#define ADC_EXTERNALTRIGINJEC_T4_CC3 ((uint32_t)(ADC_CR2_JEXTSEL_3 )) +#define ADC_EXTERNALTRIGINJEC_T10_CC1 ((uint32_t)(ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_0)) +#define ADC_EXTERNALTRIGINJEC_T7_TRGO ((uint32_t)(ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_1 )) +#define ADC_EXTERNALTRIGINJEC_EXT_IT15 ((uint32_t)(ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_1 | ADC_CR2_JEXTSEL_0)) +/** + * @} + */ + +/** + * @} + */ + + +/* Exported macro ------------------------------------------------------------*/ + +/** @defgroup ADCEx_Exported_Macros ADCEx Exported Macros + * @{ + */ +/* Macro for internal HAL driver usage, and possibly can be used into code of */ +/* final user. */ + +/** + * @brief Selection of channels bank. + * Note: Banks availability depends on devices categories. + * This macro is intended to change bank selection quickly on the fly, + * without going through ADC init structure update and execution of function + * 'HAL_ADC_Init()'. + * @param __HANDLE__: ADC handle + * @param __BANK__: Bank selection. This parameter can be a value of @ref ADC_ChannelsBank. + * @retval None + */ +#define __HAL_ADC_CHANNELS_BANK(__HANDLE__, __BANK__) \ + MODIFY_REG((__HANDLE__)->Instance->CR2, ADC_CR2_CFG, (__BANK__)) + +#if defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) +/** + * @brief Configures the ADC channels speed. + * Limited to channels 3, 8, 13 and to devices category Cat.3, Cat.4, Cat.5. + * - For ADC_CHANNEL_3: Used as ADC direct channel (fast channel) if OPAMP1 is + * in power down mode. + * - For ADC_CHANNEL_8: Used as ADC direct channel (fast channel) if OPAMP2 is + * in power down mode. + * - For ADC_CHANNEL_13: Used as ADC re-routed channel if OPAMP3 is in + * power down mode. Otherwise, channel 13 is connected to OPAMP3 output and + * routed through switches COMP1_SW1 and VCOMP to ADC switch matrix. + * (Note: OPAMP3 is available on STM32L1 Cat.4 only). + * @param __CHANNEL__: ADC channel + * This parameter can be one of the following values: + * @arg ADC_CHANNEL_3: Channel 3 is selected. + * @arg ADC_CHANNEL_8: Channel 8 is selected. + * @arg ADC_CHANNEL_13: Channel 13 is selected. + * @retval None + */ +#define __HAL_ADC_CHANNEL_SPEED_FAST(__CHANNEL__) \ + ( ( ((__CHANNEL__) == ADC_CHANNEL_3) \ + )? \ + (SET_BIT(COMP->CSR, COMP_CSR_FCH3)) \ + : \ + ( ( ((__CHANNEL__) == ADC_CHANNEL_8) \ + )? \ + (SET_BIT(COMP->CSR, COMP_CSR_FCH8)) \ + : \ + ( ( ((__CHANNEL__) == ADC_CHANNEL_13) \ + )? \ + (SET_BIT(COMP->CSR, COMP_CSR_RCH13)) \ + : \ + (SET_BIT(COMP->CSR, 0x00000000)) \ + ) \ + ) \ + ) + +#define __HAL_ADC_CHANNEL_SPEED_SLOW(__CHANNEL__) \ + ( ( ((__CHANNEL__) == ADC_CHANNEL_3) \ + )? \ + (CLEAR_BIT(COMP->CSR, COMP_CSR_FCH3)) \ + : \ + ( ( ((__CHANNEL__) == ADC_CHANNEL_8) \ + )? \ + (CLEAR_BIT(COMP->CSR, COMP_CSR_FCH8)) \ + : \ + ( ( ((__CHANNEL__) == ADC_CHANNEL_13) \ + )? \ + (CLEAR_BIT(COMP->CSR, COMP_CSR_RCH13)) \ + : \ + (SET_BIT(COMP->CSR, 0x00000000)) \ + ) \ + ) \ + ) +#endif /* STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ + +/** + * @} + */ + +/* Private macro ------------------------------------------------------------*/ + +/** @defgroup ADCEx_Private_Macro ADCEx Private Macro + * @{ + */ +/* Macro reserved for internal HAL driver usage, not intended to be used in */ +/* code of final user. */ + +/** + * @brief Set ADC ranks available in register SQR1. + * Register SQR1 bits availability depends on device category. + * @param _NbrOfConversion_: Regular channel sequence length + * @retval None + */ +#if defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) +#define __ADC_SQR1_SQXX (ADC_SQR1_SQ28 | ADC_SQR1_SQ27 | ADC_SQR1_SQ26 | ADC_SQR1_SQ25) +#else +#define __ADC_SQR1_SQXX (ADC_SQR1_SQ27 | ADC_SQR1_SQ26 | ADC_SQR1_SQ25) +#endif /* STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ + +/** + * @brief Set the ADC's sample time for channel numbers between 30 and 31. + * Register SMPR0 availability depends on device category. If register is not + * available on the current device, this macro does nothing. + * @retval None + * @param _SAMPLETIME_: Sample time parameter. + * @param _CHANNELNB_: Channel number. + * @retval None + */ +#if defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) +#define ADC_SMPR0(_SAMPLETIME_, _CHANNELNB_) \ + ((_SAMPLETIME_) << (3 * ((_CHANNELNB_) - 30))) +#else +#define ADC_SMPR0(_SAMPLETIME_, _CHANNELNB_) \ + ((uint32_t)0x00000000) +#endif /* STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ + +#if defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) +/** + * @brief Set the ADC's sample time for channel numbers between 20 and 29. + * @param _SAMPLETIME_: Sample time parameter. + * @param _CHANNELNB_: Channel number. + * @retval None + */ +#define ADC_SMPR1(_SAMPLETIME_, _CHANNELNB_) \ + ((_SAMPLETIME_) << (3 * ((_CHANNELNB_) - 20))) +#else +/** + * @brief Set the ADC's sample time for channel numbers between 20 and 26. + * @param _SAMPLETIME_: Sample time parameter. + * @param _CHANNELNB_: Channel number. + * @retval None + */ +#define ADC_SMPR1(_SAMPLETIME_, _CHANNELNB_) \ + ((_SAMPLETIME_) << (3 * ((_CHANNELNB_) - 20))) +#endif /* STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ + +/** + * @brief Defines the highest channel available in register SMPR1. Channels + * availability depends on device category: + * Highest channel in register SMPR1 is channel 26 for devices Cat.1, Cat.2, Cat.3 + * Highest channel in register SMPR1 is channel 29 for devices Cat.4, Cat.5 + * @param None + * @retval None + */ +#if defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) +#define ADC_SMPR1_CHANNEL_MAX ADC_CHANNEL_29 +#else +#define ADC_SMPR1_CHANNEL_MAX ADC_CHANNEL_26 +#endif /* STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ + + +/** + * @brief Define mask of configuration bits of ADC and regular group in + * register CR2 (bits of ADC enable, conversion start and injected group are + * excluded of this mask). + * @retval None + */ +#if defined (STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined (STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined (STM32L151xE) || defined (STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) +#define ADC_CR2_MASK_ADCINIT() \ + (ADC_CR2_EXTEN | ADC_CR2_EXTSEL | ADC_CR2_ALIGN | ADC_CR2_EOCS | ADC_CR2_DDS | ADC_CR2_DELS | ADC_CR2_CFG | ADC_CR2_CONT) +#else +#define ADC_CR2_MASK_ADCINIT() \ + (ADC_CR2_EXTEN | ADC_CR2_EXTSEL | ADC_CR2_ALIGN | ADC_CR2_EOCS | ADC_CR2_DDS | ADC_CR2_DELS | ADC_CR2_CONT) +#endif + + +/** + * @brief Get the maximum ADC conversion cycles on all channels. + * Returns the selected sampling time + conversion time (12.5 ADC clock cycles) + * Approximation of sampling time within 2 ranges, returns the highest value: + * below 24 cycles {4 cycles; 9 cycles; 16 cycles; 24 cycles} + * between 48 cycles and 384 cycles {48 cycles; 96 cycles; 192 cycles; 384 cycles} + * Unit: ADC clock cycles + * @param __HANDLE__: ADC handle + * @retval ADC conversion cycles on all channels + */ +#if defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) +#define ADC_CONVCYCLES_MAX_RANGE(__HANDLE__) \ + (( (((__HANDLE__)->Instance->SMPR3 & ADC_SAMPLETIME_ALLCHANNELS_SMPR3BIT2) == RESET) && \ + (((__HANDLE__)->Instance->SMPR2 & ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT2) == RESET) && \ + (((__HANDLE__)->Instance->SMPR1 & ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT2) == RESET) && \ + (((__HANDLE__)->Instance->SMPR0 & ADC_SAMPLETIME_ALLCHANNELS_SMPR0BIT2) == RESET) ) ? \ + \ + ADC_CONVERSIONCLOCKCYCLES_SAMPLETIME_24CYCLES : ADC_CONVERSIONCLOCKCYCLES_SAMPLETIME_384CYCLES \ + ) +#else +#define ADC_CONVCYCLES_MAX_RANGE(__HANDLE__) \ + (( (((__HANDLE__)->Instance->SMPR3 & ADC_SAMPLETIME_ALLCHANNELS_SMPR3BIT2) == RESET) && \ + (((__HANDLE__)->Instance->SMPR2 & ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT2) == RESET) && \ + (((__HANDLE__)->Instance->SMPR1 & ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT2) == RESET) ) ? \ + \ + ADC_CONVERSIONCLOCKCYCLES_SAMPLETIME_24CYCLES : ADC_CONVERSIONCLOCKCYCLES_SAMPLETIME_384CYCLES \ + ) +#endif /* STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ + +/** + * @brief Get the ADC clock prescaler from ADC common control register + * and convert it to its decimal number setting (refer to reference manual) + * @retval None + */ +#define ADC_GET_CLOCK_PRESCALER_DECIMAL(__HANDLE__) \ + ((0x01) << ((ADC->CCR & ADC_CCR_ADCPRE) >> POSITION_VAL(ADC_CCR_ADCPRE))) + +/** + * @brief Clear register SMPR0. + * Register SMPR0 availability depends on device category. If register is not + * available on the current device, this macro performs no action. + * @param __HANDLE__: ADC handle + * @retval None + */ +#if defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) +#define ADC_SMPR1_CLEAR(__HANDLE__) \ + CLEAR_BIT((__HANDLE__)->Instance->SMPR1, (ADC_SMPR1_SMP29 | ADC_SMPR1_SMP28 | ADC_SMPR1_SMP27 | \ + ADC_SMPR1_SMP26 | ADC_SMPR1_SMP25 | ADC_SMPR1_SMP24 | \ + ADC_SMPR1_SMP23 | ADC_SMPR1_SMP22 | ADC_SMPR1_SMP21 | \ + ADC_SMPR1_SMP20 )) + +#define ADC_SMPR0_CLEAR(__HANDLE__) \ + (CLEAR_BIT((__HANDLE__)->Instance->SMPR0, (ADC_SMPR0_SMP31 | ADC_SMPR0_SMP30))) +#else +#define ADC_SMPR1_CLEAR(__HANDLE__) \ + CLEAR_BIT((__HANDLE__)->Instance->SMPR1, (ADC_SMPR1_SMP26 | ADC_SMPR1_SMP25 | ADC_SMPR1_SMP24 | \ + ADC_SMPR1_SMP23 | ADC_SMPR1_SMP22 | ADC_SMPR1_SMP21 | \ + ADC_SMPR1_SMP20 )) + +#define ADC_SMPR0_CLEAR(__HANDLE__) __NOP() +#endif /* STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ + +/** + * @brief Clear register CR2. + * @param __HANDLE__: ADC handle + * @retval None + */ +#if defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) +#define ADC_CR2_CLEAR(__HANDLE__) \ + (CLEAR_BIT((__HANDLE__)->Instance->CR2, (ADC_CR2_SWSTART | ADC_CR2_EXTEN | ADC_CR2_EXTSEL | \ + ADC_CR2_JSWSTART | ADC_CR2_JEXTEN | ADC_CR2_JEXTSEL | \ + ADC_CR2_ALIGN | ADC_CR2_EOCS | ADC_CR2_DDS | \ + ADC_CR2_DMA | ADC_CR2_DELS | ADC_CR2_CFG | \ + ADC_CR2_CONT | ADC_CR2_ADON )) \ + ) +#else +#define ADC_CR2_CLEAR(__HANDLE__) \ + (CLEAR_BIT((__HANDLE__)->Instance->CR2, (ADC_CR2_SWSTART | ADC_CR2_EXTEN | ADC_CR2_EXTSEL | \ + ADC_CR2_JSWSTART | ADC_CR2_JEXTEN | ADC_CR2_JEXTSEL | \ + ADC_CR2_ALIGN | ADC_CR2_EOCS | ADC_CR2_DDS | \ + ADC_CR2_DMA | ADC_CR2_DELS | \ + ADC_CR2_CONT | ADC_CR2_ADON )) \ + ) +#endif /* STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ + +/** + * @brief Set the sampling time of selected channel on register SMPR0 + * Register SMPR0 availability depends on device category. If register is not + * available on the current device, this macro performs no action. + * @param __HANDLE__: ADC handle + * @param _SAMPLETIME_: Sample time parameter. + * @param __CHANNEL__: Channel number. + * @retval None + */ +#if defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) +#define ADC_SMPR0_CHANNEL_SET(__HANDLE__, _SAMPLETIME_, __CHANNEL__) \ + MODIFY_REG((__HANDLE__)->Instance->SMPR0, \ + ADC_SMPR0(ADC_SMPR0_SMP30, (__CHANNEL__)), \ + ADC_SMPR0((_SAMPLETIME_), (__CHANNEL__)) ) +#else +#define ADC_SMPR0_CHANNEL_SET(__HANDLE__, _SAMPLETIME_, __CHANNEL__) __NOP() +#endif /* STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ + + +#define IS_ADC_INJECTED_RANK(CHANNEL) (((CHANNEL) == ADC_INJECTED_RANK_1) || \ + ((CHANNEL) == ADC_INJECTED_RANK_2) || \ + ((CHANNEL) == ADC_INJECTED_RANK_3) || \ + ((CHANNEL) == ADC_INJECTED_RANK_4) ) + +#define IS_ADC_EXTTRIGINJEC_EDGE(EDGE) (((EDGE) == ADC_EXTERNALTRIGINJECCONV_EDGE_NONE) || \ + ((EDGE) == ADC_EXTERNALTRIGINJECCONV_EDGE_RISING) || \ + ((EDGE) == ADC_EXTERNALTRIGINJECCONV_EDGE_FALLING) || \ + ((EDGE) == ADC_EXTERNALTRIGINJECCONV_EDGE_RISINGFALLING) ) + +#define IS_ADC_EXTTRIGINJEC(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_CC1) || \ + ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_TRGO) || \ + ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T3_CC4) || \ + ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_TRGO) || \ + ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_CC1) || \ + ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_CC2) || \ + ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_CC3) || \ + ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T7_TRGO) || \ + ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T9_CC1) || \ + ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T9_TRGO) || \ + ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T10_CC1) || \ + ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_EXT_IT15) || \ + ((REGTRIG) == ADC_SOFTWARE_START) ) + +/** @defgroup ADCEx_injected_nb_conv_verification ADCEx injected nb conv verification + * @{ + */ +#define IS_ADC_INJECTED_NB_CONV(LENGTH) (((LENGTH) >= ((uint32_t)1)) && ((LENGTH) <= ((uint32_t)4))) +/** + * @} + */ + +/** + * @} + */ + + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup ADCEx_Exported_Functions + * @{ + */ + +/* IO operation functions *****************************************************/ +/** @addtogroup ADCEx_Exported_Functions_Group1 + * @{ + */ + +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_ADCEx_InjectedStart(ADC_HandleTypeDef* hadc); +HAL_StatusTypeDef HAL_ADCEx_InjectedStop(ADC_HandleTypeDef* hadc); +HAL_StatusTypeDef HAL_ADCEx_InjectedPollForConversion(ADC_HandleTypeDef* hadc, uint32_t Timeout); + +/* Non-blocking mode: Interruption */ +HAL_StatusTypeDef HAL_ADCEx_InjectedStart_IT(ADC_HandleTypeDef* hadc); +HAL_StatusTypeDef HAL_ADCEx_InjectedStop_IT(ADC_HandleTypeDef* hadc); + +/* ADC retrieve conversion value intended to be used with polling or interruption */ +uint32_t HAL_ADCEx_InjectedGetValue(ADC_HandleTypeDef* hadc, uint32_t InjectedRank); + +/* ADC IRQHandler and Callbacks used in non-blocking modes (Interruption) */ +void HAL_ADCEx_InjectedConvCpltCallback(ADC_HandleTypeDef* hadc); +/** + * @} + */ + + +/* Peripheral Control functions ***********************************************/ +/** @addtogroup ADCEx_Exported_Functions_Group2 + * @{ + */ + +HAL_StatusTypeDef HAL_ADCEx_InjectedConfigChannel(ADC_HandleTypeDef* hadc,ADC_InjectionConfTypeDef* sConfigInjected); +/** + * @} + */ + + +/** + * @} + */ + + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32L1xx_HAL_ADC_EX_H */ + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_comp.h b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_comp.h new file mode 100755 index 0000000..6e42459 --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_comp.h @@ -0,0 +1,614 @@ +/** + ****************************************************************************** + * @file stm32l1xx_hal_comp.h + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief Header file of COMP HAL module. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L1xx_HAL_COMP_H +#define __STM32L1xx_HAL_COMP_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_hal_def.h" + +/** @addtogroup STM32L1xx_HAL_Driver + * @{ + */ + +/** @addtogroup COMP + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup COMP_Exported_Types COMP Exported Types + * @{ + */ + +/** + * @brief COMP Init structure definition + */ +typedef struct +{ + + uint32_t InvertingInput; /*!< Selects the inverting input of the comparator. + This parameter can be a value of @ref COMP_InvertingInput + Note: Inverting input can be changed on the fly, while comparator is running. + Note: This feature is available on COMP2 only. If COMP1 is selected, this parameter is discarded (On COMP1, inverting input is fixed to Vrefint). */ + + uint32_t NonInvertingInput; /*!< Selects the non inverting input of the comparator. + This parameter can be a value of @ref COMPEx_NonInvertingInput */ + + uint32_t Output; /*!< Selects the output redirection of the comparator. + This parameter can be a value of @ref COMP_Output + Note: This feature is available on COMP2 only. If COMP1 is selected, this parameter is discarded. */ + + uint32_t Mode; /*!< Selects the operating consumption mode of the comparator + to adjust the speed/consumption. + This parameter can be a value of @ref COMP_Mode + Note: This feature is available on COMP2 only. If COMP1 is selected, this parameter is discarded. */ + + uint32_t WindowMode; /*!< Selects the window mode of the 2 comparators. + If enabled, non-inverting inputs of the 2 comparators are connected together and are using inputs of COMP2 only (COMP1 non-inverting input is no more accessible, even from ADC channel VCOMP). + This parameter can be a value of @ref COMP_WindowMode + Note: This feature must be enabled from COMP2 instance. If COMP1 is selected, this parameter is discarded. */ + + uint32_t TriggerMode; /*!< Selects the trigger mode of the comparator when using interruption on EXTI line (interrupt mode). + This parameter can be a value of @ref COMP_TriggerMode + Note: This feature is used with function "HAL_COMP_Start_IT()". In all other functions, this parameter is discarded. */ + + uint32_t NonInvertingInputPull; /*!< Selects the internal pulling resistor connected on non inverting input. + This parameter can be a value of @ref COMP_NonInvertingInputPull + Note: To avoid extra power consumption, only one resistor should be enabled at a time. + Note: This feature is available on COMP1 only. If COMP2 is selected, this parameter is discarded. */ + +}COMP_InitTypeDef; + +/** + * @brief HAL State structures definition + */ +typedef enum +{ + HAL_COMP_STATE_RESET = 0x00, /*!< COMP not yet initialized or disabled */ + HAL_COMP_STATE_READY = 0x01, /*!< COMP initialized and ready for use */ + HAL_COMP_STATE_READY_LOCKED = 0x11, /*!< COMP initialized but the configuration is locked */ + HAL_COMP_STATE_BUSY = 0x02, /*!< COMP is running */ + HAL_COMP_STATE_BUSY_LOCKED = 0x12 /*!< COMP is running and the configuration is locked */ +}HAL_COMP_StateTypeDef; + +/** + * @brief COMP Handle Structure definition + */ +typedef struct +{ + COMP_TypeDef *Instance; /*!< Register base address */ + COMP_InitTypeDef Init; /*!< COMP required parameters */ + HAL_LockTypeDef Lock; /*!< Locking object */ + __IO HAL_COMP_StateTypeDef State; /*!< COMP communication state */ +} COMP_HandleTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup COMP_Exported_Constants COMP Exported Constants + * @{ + */ + +/** @defgroup COMP_Output COMP Output + * @{ + */ +#define COMP_OUTPUT_TIM2IC4 (0x00000000U) /*!< COMP2 output connected to TIM2 Input Capture 4 */ +#define COMP_OUTPUT_TIM2OCREFCLR ( COMP_CSR_OUTSEL_0) /*!< COMP2 output connected to TIM2 OCREF Clear */ +#define COMP_OUTPUT_TIM3IC4 ( COMP_CSR_OUTSEL_1 ) /*!< COMP2 output connected to TIM3 Input Capture 4 */ +#define COMP_OUTPUT_TIM3OCREFCLR ( COMP_CSR_OUTSEL_1 | COMP_CSR_OUTSEL_0) /*!< COMP2 output connected to TIM3 OCREF Clear */ +#define COMP_OUTPUT_TIM4IC4 (COMP_CSR_OUTSEL_2 ) /*!< COMP2 output connected to TIM4 Input Capture 4 */ +#define COMP_OUTPUT_TIM4OCREFCLR (COMP_CSR_OUTSEL_2 | COMP_CSR_OUTSEL_0) /*!< COMP2 output connected to TIM4 OCREF Clear */ +#define COMP_OUTPUT_TIM10IC1 (COMP_CSR_OUTSEL_2 | COMP_CSR_OUTSEL_1 ) /*!< COMP2 output connected to TIM10 Input Capture 1 */ +#define COMP_OUTPUT_NONE (COMP_CSR_OUTSEL_2 | COMP_CSR_OUTSEL_1 | COMP_CSR_OUTSEL_0) /*!< COMP2 output is not connected to other peripherals */ + +#define IS_COMP_OUTPUT(OUTPUT) (((OUTPUT) == COMP_OUTPUT_TIM2IC4) || \ + ((OUTPUT) == COMP_OUTPUT_TIM2OCREFCLR) || \ + ((OUTPUT) == COMP_OUTPUT_TIM3IC4) || \ + ((OUTPUT) == COMP_OUTPUT_TIM3OCREFCLR) || \ + ((OUTPUT) == COMP_OUTPUT_TIM4IC4) || \ + ((OUTPUT) == COMP_OUTPUT_TIM4OCREFCLR) || \ + ((OUTPUT) == COMP_OUTPUT_TIM10IC1) || \ + ((OUTPUT) == COMP_OUTPUT_NONE) ) +/** + * @} + */ + +/** @defgroup COMP_InvertingInput COMP InvertingInput + * @{ + */ +/* Inverting Input specific to COMP2 */ +#define COMP_INVERTINGINPUT_IO ( COMP_CSR_INSEL_0) /*!< External I/O (COMP2_INM connected to pin PB3) connected to comparator 2 inverting input */ +#define COMP_INVERTINGINPUT_VREFINT ( COMP_CSR_INSEL_1 ) /*!< VREFINT connected to comparator 2 inverting input */ +#define COMP_INVERTINGINPUT_3_4VREFINT ( COMP_CSR_INSEL_1 | COMP_CSR_INSEL_0) /*!< 3/4 VREFINT connected to comparator 2 inverting input */ +#define COMP_INVERTINGINPUT_1_2VREFINT (COMP_CSR_INSEL_2 ) /*!< 1/2 VREFINT connected to comparator 2 inverting input */ +#define COMP_INVERTINGINPUT_1_4VREFINT (COMP_CSR_INSEL_2 | COMP_CSR_INSEL_0) /*!< 1/4 VREFINT connected to comparator 2 inverting input */ +#define COMP_INVERTINGINPUT_DAC1 (COMP_CSR_INSEL_2 | COMP_CSR_INSEL_1 ) /*!< DAC_OUT1 (PA4) connected to comparator 2 inverting input */ +#define COMP_INVERTINGINPUT_DAC2 (COMP_CSR_INSEL_2 | COMP_CSR_INSEL_1 | COMP_CSR_INSEL_0) /*!< DAC2_OUT (PA5) connected to comparator 2 inverting input */ + +#define IS_COMP_INVERTINGINPUT(INPUT) (((INPUT) == COMP_INVERTINGINPUT_IO) || \ + ((INPUT) == COMP_INVERTINGINPUT_VREFINT) || \ + ((INPUT) == COMP_INVERTINGINPUT_3_4VREFINT) || \ + ((INPUT) == COMP_INVERTINGINPUT_1_2VREFINT) || \ + ((INPUT) == COMP_INVERTINGINPUT_1_4VREFINT) || \ + ((INPUT) == COMP_INVERTINGINPUT_DAC1) || \ + ((INPUT) == COMP_INVERTINGINPUT_DAC2) ) +/** + * @} + */ + +/** @defgroup COMP_Mode COMP Mode + * @{ + */ +/* Please refer to the electrical characteristics in the device datasheet for + the power consumption values */ +#define COMP_MODE_LOWSPEED (0x00000000U) /*!< Low Speed */ +#define COMP_MODE_HIGHSPEED COMP_CSR_SPEED /*!< High Speed */ + +#define IS_COMP_MODE(SPEED) (((SPEED) == COMP_MODE_LOWSPEED) || \ + ((SPEED) == COMP_MODE_HIGHSPEED)) +/** + * @} + */ + +/** @defgroup COMP_WindowMode COMP WindowMode + * @{ + */ +#define COMP_WINDOWMODE_DISABLE (0x00000000U) /*!< Window mode disabled: COMP1 non-inverting input is independant */ +#define COMP_WINDOWMODE_ENABLE COMP_CSR_WNDWE /*!< Window mode enabled: COMP1 non-inverting input is no more accessible, even from ADC channel VCOMP) (connected to COMP2 non-inverting input) */ + +#define IS_COMP_WINDOWMODE(WINDOWMODE) (((WINDOWMODE) == COMP_WINDOWMODE_DISABLE) || \ + ((WINDOWMODE) == COMP_WINDOWMODE_ENABLE)) +/** + * @} + */ + +/** @defgroup COMP_OutputLevel COMP OutputLevel + * @{ + */ +/* Comparator output is low when the non-inverting input is at a lower */ +/* voltage than the inverting input. */ +#define COMP_OUTPUTLEVEL_LOW (0x00000000U) + +/* Comparator output is high when the non-inverting input is at a higher */ +/* voltage than the inverting input. */ +#define COMP_OUTPUTLEVEL_HIGH (0x00000001U) +/** + * @} + */ + +/** @defgroup COMP_TriggerMode COMP TriggerMode + * @{ + */ +#define COMP_TRIGGERMODE_NONE (0x00000000U) /*!< No External Interrupt trigger detection */ +#define COMP_TRIGGERMODE_IT_RISING (0x00000001U) /*!< External Interrupt Mode with Rising edge trigger detection */ +#define COMP_TRIGGERMODE_IT_FALLING (0x00000002U) /*!< External Interrupt Mode with Falling edge trigger detection */ +#define COMP_TRIGGERMODE_IT_RISING_FALLING (0x00000003U) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */ + +#define IS_COMP_TRIGGERMODE(MODE) (((MODE) == COMP_TRIGGERMODE_NONE) || \ + ((MODE) == COMP_TRIGGERMODE_IT_RISING) || \ + ((MODE) == COMP_TRIGGERMODE_IT_FALLING) || \ + ((MODE) == COMP_TRIGGERMODE_IT_RISING_FALLING) ) +/** + * @} + */ + +/** @defgroup COMP_ExtiLineEvent COMP ExtiLineEvent + * @{ + */ +#define COMP_EXTI_LINE_COMP1 EXTI_RTSR_TR21 /*!< External interrupt line 21 Connected to COMP1 */ +#define COMP_EXTI_LINE_COMP2 EXTI_RTSR_TR22 /*!< External interrupt line 22 Connected to COMP2 */ + +/** + * @} + */ + +/** @defgroup COMP_NonInvertingInputPull COMP NonInvertingInputPull + * @{ + */ +#define COMP_NONINVERTINGINPUT_NOPULL (0x00000000U) /*!< No internal pull-up or pull-down resistor connected to comparator non inverting input */ +#define COMP_NONINVERTINGINPUT_10KPU COMP_CSR_10KPU /*!< Internal 10kOhm pull-up resistor connected to comparator non inverting input */ +#define COMP_NONINVERTINGINPUT_10KPD COMP_CSR_10KPD /*!< Internal 10kOhm pull-down resistor connected to comparator non inverting input */ +#define COMP_NONINVERTINGINPUT_400KPU COMP_CSR_400KPU /*!< Internal 400kOhm pull-up resistor connected to comparator non inverting input */ +#define COMP_NONINVERTINGINPUT_400KPD COMP_CSR_400KPD /*!< Internal 400kOhm pull-down resistor connected to comparator non inverting input */ + +#define IS_COMP_NONINVERTINGINPUTPULL(INPUT) (((INPUT) == COMP_NONINVERTINGINPUT_NOPULL) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_10KPU) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_10KPD) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_400KPU) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_400KPD) ) +/** + * @} + */ + +/** + * @} + */ + + +/* Exported macro ------------------------------------------------------------*/ + +/** @defgroup COMP_Exported_Macro COMP Exported Macro + * @{ + */ + +/** @brief Reset COMP handle state + * @param __HANDLE__: COMP handle. + * @retval None + */ +#define __HAL_COMP_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_COMP_STATE_RESET) + +/** + * @brief Enables the specified comparator + * @param __HANDLE__: COMP handle. + * @retval None. + */ +#define __HAL_COMP_ENABLE(__HANDLE__) \ + ( ( ((__HANDLE__)->Instance == COMP1) \ + )? \ + SET_BIT(COMP->CSR, COMP_CSR_CMP1EN) \ + : \ + MODIFY_REG(COMP->CSR, COMP_CSR_INSEL, (__HANDLE__)->Init.InvertingInput ) \ + ) + +/** + * @brief Disables the specified comparator + * @param __HANDLE__: COMP handle. + * @retval None. + */ +#define __HAL_COMP_DISABLE(__HANDLE__) \ + ( ( ((__HANDLE__)->Instance == COMP1) \ + )? \ + CLEAR_BIT(COMP->CSR, COMP_CSR_CMP1EN) \ + : \ + CLEAR_BIT(COMP->CSR, COMP_CSR_INSEL) \ + ) + +/** @brief Checks whether the specified COMP flag is set or not. + * @param __HANDLE__: specifies the COMP Handle. + * @param __FLAG__: specifies the flag to check. + * This parameter can be one of the following values: + * @arg COMP_FLAG_LOCK: lock flag + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_COMP_GET_FLAG(__HANDLE__, __FLAG__) (READ_BIT((__HANDLE__)->Instance->CSR, (__FLAG__)) == (__FLAG__)) + +/** + * @brief Enable the COMP1 EXTI line rising edge trigger. + * @retval None + */ +#define __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR, COMP_EXTI_LINE_COMP1) + +/** + * @brief Disable the COMP1 EXTI line rising edge trigger. + * @retval None + */ +#define __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR, COMP_EXTI_LINE_COMP1) + +/** + * @brief Enable the COMP1 EXTI line falling edge trigger. + * @retval None + */ +#define __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR, COMP_EXTI_LINE_COMP1) + +/** + * @brief Disable the COMP1 EXTI line falling edge trigger. + * @retval None + */ +#define __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR, COMP_EXTI_LINE_COMP1) + +/** + * @brief Enable the COMP1 EXTI line rising & falling edge trigger. + * @retval None + */ +#define __HAL_COMP_COMP1_EXTI_ENABLE_RISING_FALLING_EDGE() do { \ + __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE(); \ + __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE(); \ + } while(0) + +/** + * @brief Disable the COMP1 EXTI line rising & falling edge trigger. + * @retval None + */ +#define __HAL_COMP_COMP1_EXTI_DISABLE_RISING_FALLING_EDGE() do { \ + __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE(); \ + __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE(); \ + } while(0) + +/** + * @brief Enable the COMP1 EXTI line in interrupt mode. + * @retval None + */ +#define __HAL_COMP_COMP1_EXTI_ENABLE_IT() SET_BIT(EXTI->IMR, COMP_EXTI_LINE_COMP1) + +/** + * @brief Disable the COMP1 EXTI line in interrupt mode. + * @retval None + */ +#define __HAL_COMP_COMP1_EXTI_DISABLE_IT() CLEAR_BIT(EXTI->IMR, COMP_EXTI_LINE_COMP1) + +/** + * @brief Enable the COMP1 EXTI Line in event mode. + * @retval None + */ +#define __HAL_COMP_COMP1_EXTI_ENABLE_EVENT() SET_BIT(EXTI->EMR, COMP_EXTI_LINE_COMP1) + +/** + * @brief Disable the COMP1 EXTI Line in event mode. + * @retval None + */ +#define __HAL_COMP_COMP1_EXTI_DISABLE_EVENT() CLEAR_BIT(EXTI->EMR, COMP_EXTI_LINE_COMP1) + +/** + * @brief Check whether the COMP1 EXTI line flag is set or not. + * @retval RESET or SET + */ +#define __HAL_COMP_COMP1_EXTI_GET_FLAG() READ_BIT(EXTI->PR, COMP_EXTI_LINE_COMP1) + +/** + * @brief Clear the the COMP1 EXTI flag. + * @retval None + */ +#define __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() WRITE_REG(EXTI->PR, COMP_EXTI_LINE_COMP1) + +/** + * @brief Generates a Software interrupt on COMP1 EXTI Line. + * @retval None + */ +#define __HAL_COMP_COMP1_EXTI_GENERATE_SWIT() SET_BIT(EXTI->SWIER, COMP_EXTI_LINE_COMP1) + +/** + * @brief Enable the COMP2 EXTI line rising edge trigger. + * @retval None + */ +#define __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR, COMP_EXTI_LINE_COMP2) + +/** + * @brief Disable the COMP2 EXTI line rising edge trigger. + * @retval None + */ +#define __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR, COMP_EXTI_LINE_COMP2) + +/** + * @brief Enable the COMP2 EXTI line falling edge trigger. + * @retval None + */ +#define __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR, COMP_EXTI_LINE_COMP2) + +/** + * @brief Disable the COMP2 EXTI line falling edge trigger. + * @retval None + */ +#define __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR, COMP_EXTI_LINE_COMP2) + +/** + * @brief Enable the COMP2 EXTI line rising & falling edge trigger. + * @retval None + */ +#define __HAL_COMP_COMP2_EXTI_ENABLE_RISING_FALLING_EDGE() do { \ + __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE(); \ + __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE(); \ + } while(0) + +/** + * @brief Disable the COMP2 EXTI line rising & falling edge trigger. + * @retval None + */ +#define __HAL_COMP_COMP2_EXTI_DISABLE_RISING_FALLING_EDGE() do { \ + __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE(); \ + __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE(); \ + } while(0) + +/** + * @brief Enable the COMP2 EXTI line. + * @retval None + */ +#define __HAL_COMP_COMP2_EXTI_ENABLE_IT() SET_BIT(EXTI->IMR, COMP_EXTI_LINE_COMP2) + +/** + * @brief Disable the COMP2 EXTI line. + * @retval None + */ +#define __HAL_COMP_COMP2_EXTI_DISABLE_IT() CLEAR_BIT(EXTI->IMR, COMP_EXTI_LINE_COMP2) + +/** + * @brief Enable the COMP2 EXTI Line in event mode. + * @retval None + */ +#define __HAL_COMP_COMP2_EXTI_ENABLE_EVENT() SET_BIT(EXTI->EMR, COMP_EXTI_LINE_COMP2) + +/** + * @brief Disable the COMP2 EXTI Line in event mode. + * @retval None + */ +#define __HAL_COMP_COMP2_EXTI_DISABLE_EVENT() CLEAR_BIT(EXTI->EMR, COMP_EXTI_LINE_COMP2) + +/** + * @brief Check whether the COMP2 EXTI line flag is set or not. + * @retval RESET or SET + */ +#define __HAL_COMP_COMP2_EXTI_GET_FLAG() READ_BIT(EXTI->PR, COMP_EXTI_LINE_COMP2) + +/** + * @brief Clear the the COMP2 EXTI flag. + * @retval None + */ +#define __HAL_COMP_COMP2_EXTI_CLEAR_FLAG() WRITE_REG(EXTI->PR, COMP_EXTI_LINE_COMP2) + +/** + * @brief Generates a Software interrupt on COMP1 EXTI Line. + * @retval None + */ +#define __HAL_COMP_COMP2_EXTI_GENERATE_SWIT() SET_BIT(EXTI->SWIER, COMP_EXTI_LINE_COMP2) + +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ + +/** @defgroup COMP_Private_Macro COMP Private Macro + * @{ + */ + +/** + * @brief Get the specified EXTI line for a comparator instance + * @param __INSTANCE__: specifies the COMP instance. + * @retval value of @ref COMP_ExtiLineEvent + */ +#define COMP_GET_EXTI_LINE(__INSTANCE__) \ + ( ( ((__INSTANCE__) == COMP1) \ + )? \ + (COMP_EXTI_LINE_COMP1) \ + : \ + (COMP_EXTI_LINE_COMP2) \ + ) + +/** + * @brief Select the COMP register CSR bit CMPxOUT corresponding to the + * selected COMP instance. + * @param __HANDLE__: COMP handle + * @retval Comparator register CSR bit COMP_CSR_CMP1OUT or COMP_CSR_CMP2OUT + */ +#define __COMP_CSR_CMPXOUT(__HANDLE__) \ + ( ( ((__HANDLE__)->Instance == COMP1) \ + )? \ + (COMP_CSR_CMP1OUT) \ + : \ + (COMP_CSR_CMP2OUT) \ + ) + +/** + * @brief Verification of COMP state: enabled or disabled + * @param __HANDLE__: COMP handle + * @retval SET (COMP enabled) or RESET (COMP disabled) + */ +#define __COMP_IS_ENABLED(__HANDLE__) \ + ( ( ((__HANDLE__)->Instance == COMP1) \ + )? \ + (((READ_BIT(COMP->CSR , COMP_CSR_CMP1EN) == COMP_CSR_CMP1EN) \ + ) ? SET : RESET) \ + : \ + (((READ_BIT(COMP->CSR , COMP_CSR_INSEL) != RESET) \ + ) ? SET : RESET) \ + ) + +/** + * @} + */ + + +/* Include COMP HAL Extension module */ +#include "stm32l1xx_hal_comp_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup COMP_Exported_Functions + * @{ + */ + +/* Initialization and de-initialization functions ******************************/ +/** @addtogroup COMP_Exported_Functions_Group1 + * @{ + */ +HAL_StatusTypeDef HAL_COMP_Init(COMP_HandleTypeDef *hcomp); +HAL_StatusTypeDef HAL_COMP_DeInit (COMP_HandleTypeDef *hcomp); +void HAL_COMP_MspInit(COMP_HandleTypeDef *hcomp); +void HAL_COMP_MspDeInit(COMP_HandleTypeDef *hcomp); +/** + * @} + */ + +/* I/O operation functions *****************************************************/ +/** @addtogroup COMP_Exported_Functions_Group2 + * @{ + */ +HAL_StatusTypeDef HAL_COMP_Start(COMP_HandleTypeDef *hcomp); +HAL_StatusTypeDef HAL_COMP_Stop(COMP_HandleTypeDef *hcomp); +HAL_StatusTypeDef HAL_COMP_Start_IT(COMP_HandleTypeDef *hcomp); +HAL_StatusTypeDef HAL_COMP_Stop_IT(COMP_HandleTypeDef *hcomp); +void HAL_COMP_IRQHandler(COMP_HandleTypeDef *hcomp); +/** + * @} + */ + +/* Peripheral Control functions ************************************************/ +/** @addtogroup COMP_Exported_Functions_Group3 + * @{ + */ +HAL_StatusTypeDef HAL_COMP_Lock(COMP_HandleTypeDef *hcomp); +uint32_t HAL_COMP_GetOutputLevel(COMP_HandleTypeDef *hcomp); + +/* Callback in Interrupt mode */ +void HAL_COMP_TriggerCallback(COMP_HandleTypeDef *hcomp); +/** + * @} + */ + +/* Peripheral State functions **************************************************/ +/** @addtogroup COMP_Exported_Functions_Group4 + * @{ + */ +HAL_COMP_StateTypeDef HAL_COMP_GetState(COMP_HandleTypeDef *hcomp); +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32L1xx_HAL_COMP_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_comp_ex.h b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_comp_ex.h new file mode 100755 index 0000000..d395eb8 --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_comp_ex.h @@ -0,0 +1,336 @@ +/** + ****************************************************************************** + * @file stm32l1xx_hal_comp_ex.h + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief Header file of COMP HAL Extension module. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L1xx_HAL_COMP_EX_H +#define __STM32L1xx_HAL_COMP_EX_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_hal_def.h" + +/** @addtogroup STM32L1xx_HAL_Driver + * @{ + */ + +/** @defgroup COMPEx COMPEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup COMPEx_Exported_Constants COMPEx Exported Constants + * @{ + */ + +/** @defgroup COMPEx_NonInvertingInput COMPEx NonInvertingInput + * @{ + */ +#if defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) +/* Non-inverting inputs specific to COMP2 */ +#define COMP_NONINVERTINGINPUT_PB4 RI_IOSWITCH_GR6_1 /*!< I/O pin PB4 connection to COMP2 non-inverting input */ +#define COMP_NONINVERTINGINPUT_PB5 RI_IOSWITCH_GR6_2 /*!< I/O pin PB5 connection to COMP2 non-inverting input */ +#define COMP_NONINVERTINGINPUT_PB6 RI_IOSWITCH_GR6_3 /*!< I/O pin PB6 connection to COMP2 non-inverting input */ +#define COMP_NONINVERTINGINPUT_PB7 RI_IOSWITCH_GR6_4 /*!< I/O pin PB7 connection to COMP2 non-inverting input */ + +/* Non-inverting inputs specific to COMP1 */ +#define COMP_NONINVERTINGINPUT_NONE (0x00000000U) /*!< In case of window mode: No I/O pin connection to COMP1 non-inverting input. Instead, connection to COMP2 non-inverting input. */ +#define COMP_NONINVERTINGINPUT_PA0 RI_IOSWITCH_CH0 /*!< I/O pin PA0 connection to COMP1 non-inverting input */ +#define COMP_NONINVERTINGINPUT_PA1 RI_IOSWITCH_CH1 /*!< I/O pin PA1 connection to COMP1 non-inverting input */ +#define COMP_NONINVERTINGINPUT_PA2 RI_IOSWITCH_CH2 /*!< I/O pin PA2 connection to COMP1 non-inverting input */ +#define COMP_NONINVERTINGINPUT_PA3 RI_IOSWITCH_CH3 /*!< I/O pin PA3 connection to COMP1 non-inverting input */ +#define COMP_NONINVERTINGINPUT_PA4 RI_IOSWITCH_CH4 /*!< I/O pin PA4 connection to COMP1 non-inverting input */ +#define COMP_NONINVERTINGINPUT_PA5 RI_IOSWITCH_CH5 /*!< I/O pin PA5 connection to COMP1 non-inverting input */ +#define COMP_NONINVERTINGINPUT_PA6 RI_IOSWITCH_CH5 /*!< I/O pin PA5 connection to COMP1 non-inverting input */ +#define COMP_NONINVERTINGINPUT_PA7 RI_IOSWITCH_CH7 /*!< I/O pin PA7 connection to COMP1 non-inverting input */ +#define COMP_NONINVERTINGINPUT_PB0 RI_IOSWITCH_CH8 /*!< I/O pin PB0 connection to COMP1 non-inverting input */ +#define COMP_NONINVERTINGINPUT_PB1 RI_IOSWITCH_CH9 /*!< I/O pin PB1 connection to COMP1 non-inverting input */ +#define COMP_NONINVERTINGINPUT_PC0 RI_IOSWITCH_CH10 /*!< I/O pin PC0 connection to COMP1 non-inverting input */ +#define COMP_NONINVERTINGINPUT_PC1 RI_IOSWITCH_CH11 /*!< I/O pin PC1 connection to COMP1 non-inverting input */ +#define COMP_NONINVERTINGINPUT_PC2 RI_IOSWITCH_CH12 /*!< I/O pin PC2 connection to COMP1 non-inverting input */ +#define COMP_NONINVERTINGINPUT_PC3 RI_IOSWITCH_CH13 /*!< I/O pin PC3 connection to COMP1 non-inverting input */ +#define COMP_NONINVERTINGINPUT_PC4 RI_IOSWITCH_CH14 /*!< I/O pin PC4 connection to COMP1 non-inverting input */ +#define COMP_NONINVERTINGINPUT_PC5 RI_IOSWITCH_CH15 /*!< I/O pin PC5 connection to COMP1 non-inverting input */ +#define COMP_NONINVERTINGINPUT_PB12 RI_IOSWITCH_CH18 /*!< I/O pin PB12 connection to COMP1 non-inverting input */ +#define COMP_NONINVERTINGINPUT_PB13 RI_IOSWITCH_CH19 /*!< I/O pin PB13 connection to COMP1 non-inverting input */ +#define COMP_NONINVERTINGINPUT_PB14 RI_IOSWITCH_CH20 /*!< I/O pin PB14 connection to COMP1 non-inverting input */ +#define COMP_NONINVERTINGINPUT_PB15 RI_IOSWITCH_CH21 /*!< I/O pin PB15 connection to COMP1 non-inverting input */ +#define COMP_NONINVERTINGINPUT_PE7 RI_IOSWITCH_CH22 /*!< I/O pin PE7 connection to COMP1 non-inverting input */ +#define COMP_NONINVERTINGINPUT_PE8 RI_IOSWITCH_CH23 /*!< I/O pin PE8 connection to COMP1 non-inverting input */ +#define COMP_NONINVERTINGINPUT_PE9 RI_IOSWITCH_CH24 /*!< I/O pin PE9 connection to COMP1 non-inverting input */ +#define COMP_NONINVERTINGINPUT_PE10 RI_IOSWITCH_CH25 /*!< I/O pin PE10 connection to COMP1 non-inverting input */ +#define COMP_NONINVERTINGINPUT_PF6 RI_IOSWITCH_CH27 /*!< I/O pin PF6 connection to COMP1 non-inverting input */ +#define COMP_NONINVERTINGINPUT_PF7 RI_IOSWITCH_CH28 /*!< I/O pin PF7 connection to COMP1 non-inverting input */ +#define COMP_NONINVERTINGINPUT_PF8 RI_IOSWITCH_CH29 /*!< I/O pin PF8 connection to COMP1 non-inverting input */ +#define COMP_NONINVERTINGINPUT_PF9 RI_IOSWITCH_CH30 /*!< I/O pin PF9 connection to COMP1 non-inverting input */ +#define COMP_NONINVERTINGINPUT_PF10 RI_IOSWITCH_CH31 /*!< I/O pin PF10 connection to COMP1 non-inverting input */ + +#define COMP_NONINVERTINGINPUT_OPAMP1 COMP_NONINVERTINGINPUT_PA3 /*!< OPAMP1 output connection to COMP1 non-inverting input */ +#define COMP_NONINVERTINGINPUT_OPAMP2 COMP_NONINVERTINGINPUT_PB0 /*!< OPAMP2 output connection to COMP1 non-inverting input */ +#if defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) +#define COMP_NONINVERTINGINPUT_OPAMP3 COMP_NONINVERTINGINPUT_PC3 /*!< OPAMP3 output connection to COMP1 non-inverting input */ +#endif /* STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD */ +#endif /* STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ + +#if defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) +/* Non-inverting inputs specific to COMP2 */ +#define COMP_NONINVERTINGINPUT_PB4 RI_IOSWITCH_GR6_1 /*!< I/O pin PB4 connection to COMP2 non-inverting input */ +#define COMP_NONINVERTINGINPUT_PB5 RI_IOSWITCH_GR6_2 /*!< I/O pin PB5 connection to COMP2 non-inverting input */ +#define COMP_NONINVERTINGINPUT_PB6 RI_IOSWITCH_GR6_3 /*!< I/O pin PB6 connection to COMP2 non-inverting input */ +#define COMP_NONINVERTINGINPUT_PB7 RI_IOSWITCH_GR6_4 /*!< I/O pin PB7 connection to COMP2 non-inverting input */ + +/* Non-inverting inputs specific to COMP1 */ +#define COMP_NONINVERTINGINPUT_NONE (0x00000000U) /*!< In case of window mode: No I/O pin connection to COMP1 non-inverting input. Instead, connection to COMP2 non-inverting input. */ +#define COMP_NONINVERTINGINPUT_PA0 RI_IOSWITCH_CH0 /*!< I/O pin PA0 connection to COMP1 non-inverting input */ +#define COMP_NONINVERTINGINPUT_PA1 RI_IOSWITCH_CH1 /*!< I/O pin PA1 connection to COMP1 non-inverting input */ +#define COMP_NONINVERTINGINPUT_PA2 RI_IOSWITCH_CH2 /*!< I/O pin PA2 connection to COMP1 non-inverting input */ +#define COMP_NONINVERTINGINPUT_PA3 RI_IOSWITCH_CH3 /*!< I/O pin PA3 connection to COMP1 non-inverting input */ +#define COMP_NONINVERTINGINPUT_PA4 RI_IOSWITCH_CH4 /*!< I/O pin PA4 connection to COMP1 non-inverting input */ +#define COMP_NONINVERTINGINPUT_PA5 RI_IOSWITCH_CH5 /*!< I/O pin PA5 connection to COMP1 non-inverting input */ +#define COMP_NONINVERTINGINPUT_PA6 RI_IOSWITCH_CH5 /*!< I/O pin PA5 connection to COMP1 non-inverting input */ +#define COMP_NONINVERTINGINPUT_PA7 RI_IOSWITCH_CH7 /*!< I/O pin PA7 connection to COMP1 non-inverting input */ +#define COMP_NONINVERTINGINPUT_PB0 RI_IOSWITCH_CH8 /*!< I/O pin PB0 connection to COMP1 non-inverting input */ +#define COMP_NONINVERTINGINPUT_PB1 RI_IOSWITCH_CH9 /*!< I/O pin PB1 connection to COMP1 non-inverting input */ +#define COMP_NONINVERTINGINPUT_PC0 RI_IOSWITCH_CH10 /*!< I/O pin PC0 connection to COMP1 non-inverting input */ +#define COMP_NONINVERTINGINPUT_PC1 RI_IOSWITCH_CH11 /*!< I/O pin PC1 connection to COMP1 non-inverting input */ +#define COMP_NONINVERTINGINPUT_PC2 RI_IOSWITCH_CH12 /*!< I/O pin PC2 connection to COMP1 non-inverting input */ +#define COMP_NONINVERTINGINPUT_PC3 RI_IOSWITCH_CH13 /*!< I/O pin PC3 connection to COMP1 non-inverting input */ +#define COMP_NONINVERTINGINPUT_PC4 RI_IOSWITCH_CH14 /*!< I/O pin PC4 connection to COMP1 non-inverting input */ +#define COMP_NONINVERTINGINPUT_PC5 RI_IOSWITCH_CH15 /*!< I/O pin PC5 connection to COMP1 non-inverting input */ +#define COMP_NONINVERTINGINPUT_PB12 RI_IOSWITCH_CH18 /*!< I/O pin PB12 connection to COMP1 non-inverting input */ +#define COMP_NONINVERTINGINPUT_PB13 RI_IOSWITCH_CH19 /*!< I/O pin PB13 connection to COMP1 non-inverting input */ +#define COMP_NONINVERTINGINPUT_PB14 RI_IOSWITCH_CH20 /*!< I/O pin PB14 connection to COMP1 non-inverting input */ +#define COMP_NONINVERTINGINPUT_PB15 RI_IOSWITCH_CH21 /*!< I/O pin PB15 connection to COMP1 non-inverting input */ +#define COMP_NONINVERTINGINPUT_PE7 RI_IOSWITCH_CH22 /*!< I/O pin PE7 connection to COMP1 non-inverting input */ +#define COMP_NONINVERTINGINPUT_PE8 RI_IOSWITCH_CH23 /*!< I/O pin PE8 connection to COMP1 non-inverting input */ +#define COMP_NONINVERTINGINPUT_PE9 RI_IOSWITCH_CH24 /*!< I/O pin PE9 connection to COMP1 non-inverting input */ +#define COMP_NONINVERTINGINPUT_PE10 RI_IOSWITCH_CH25 /*!< I/O pin PE10 connection to COMP1 non-inverting input */ + +#define COMP_NONINVERTINGINPUT_OPAMP1 COMP_NONINVERTINGINPUT_PA3 /*!< OPAMP1 output connection to COMP1 non-inverting input */ +#define COMP_NONINVERTINGINPUT_OPAMP2 COMP_NONINVERTINGINPUT_PB0 /*!< OPAMP2 output connection to COMP1 non-inverting input */ +#endif /* STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC */ + +#if defined(STM32L100xB) || defined (STM32L151xB) || defined (STM32L152xB) || defined(STM32L100xBA) || defined (STM32L151xBA) || defined (STM32L152xBA) +/* Non-inverting inputs specific to COMP2 */ +#define COMP_NONINVERTINGINPUT_PB4 RI_IOSWITCH_GR6_1 /*!< I/O pin PB4 connection to COMP2 non-inverting input */ +#define COMP_NONINVERTINGINPUT_PB5 RI_IOSWITCH_GR6_2 /*!< I/O pin PB5 connection to COMP2 non-inverting input */ + +/* Non-inverting inputs specific to COMP1 */ +#define COMP_NONINVERTINGINPUT_NONE (0x00000000U) /*!< In case of window mode: No I/O pin connection to COMP1 non-inverting input. Instead, connection to COMP2 non-inverting input. */ +#define COMP_NONINVERTINGINPUT_PA0 RI_IOSWITCH_CH0 /*!< I/O pin PA0 connection to COMP1 non-inverting input */ +#define COMP_NONINVERTINGINPUT_PA1 RI_IOSWITCH_CH1 /*!< I/O pin PA1 connection to COMP1 non-inverting input */ +#define COMP_NONINVERTINGINPUT_PA2 RI_IOSWITCH_CH2 /*!< I/O pin PA2 connection to COMP1 non-inverting input */ +#define COMP_NONINVERTINGINPUT_PA3 RI_IOSWITCH_CH3 /*!< I/O pin PA3 connection to COMP1 non-inverting input */ +#define COMP_NONINVERTINGINPUT_PA4 RI_IOSWITCH_CH4 /*!< I/O pin PA4 connection to COMP1 non-inverting input */ +#define COMP_NONINVERTINGINPUT_PA5 RI_IOSWITCH_CH5 /*!< I/O pin PA5 connection to COMP1 non-inverting input */ +#define COMP_NONINVERTINGINPUT_PA6 RI_IOSWITCH_CH5 /*!< I/O pin PA5 connection to COMP1 non-inverting input */ +#define COMP_NONINVERTINGINPUT_PA7 RI_IOSWITCH_CH7 /*!< I/O pin PA7 connection to COMP1 non-inverting input */ +#define COMP_NONINVERTINGINPUT_PB0 RI_IOSWITCH_CH8 /*!< I/O pin PB0 connection to COMP1 non-inverting input */ +#define COMP_NONINVERTINGINPUT_PB1 RI_IOSWITCH_CH9 /*!< I/O pin PB1 connection to COMP1 non-inverting input */ +#define COMP_NONINVERTINGINPUT_PC0 RI_IOSWITCH_CH10 /*!< I/O pin PC0 connection to COMP1 non-inverting input */ +#define COMP_NONINVERTINGINPUT_PC1 RI_IOSWITCH_CH11 /*!< I/O pin PC1 connection to COMP1 non-inverting input */ +#define COMP_NONINVERTINGINPUT_PC2 RI_IOSWITCH_CH12 /*!< I/O pin PC2 connection to COMP1 non-inverting input */ +#define COMP_NONINVERTINGINPUT_PC3 RI_IOSWITCH_CH13 /*!< I/O pin PC3 connection to COMP1 non-inverting input */ +#define COMP_NONINVERTINGINPUT_PC4 RI_IOSWITCH_CH14 /*!< I/O pin PC4 connection to COMP1 non-inverting input */ +#define COMP_NONINVERTINGINPUT_PC5 RI_IOSWITCH_CH15 /*!< I/O pin PC5 connection to COMP1 non-inverting input */ +#define COMP_NONINVERTINGINPUT_PB12 RI_IOSWITCH_CH18 /*!< I/O pin PB12 connection to COMP1 non-inverting input */ +#define COMP_NONINVERTINGINPUT_PB13 RI_IOSWITCH_CH19 /*!< I/O pin PB13 connection to COMP1 non-inverting input */ +#define COMP_NONINVERTINGINPUT_PB14 RI_IOSWITCH_CH20 /*!< I/O pin PB14 connection to COMP1 non-inverting input */ +#define COMP_NONINVERTINGINPUT_PB15 RI_IOSWITCH_CH21 /*!< I/O pin PB15 connection to COMP1 non-inverting input */ +#define COMP_NONINVERTINGINPUT_PE7 RI_IOSWITCH_CH22 /*!< I/O pin PE7 connection to COMP1 non-inverting input */ +#define COMP_NONINVERTINGINPUT_PE8 RI_IOSWITCH_CH23 /*!< I/O pin PE8 connection to COMP1 non-inverting input */ +#define COMP_NONINVERTINGINPUT_PE9 RI_IOSWITCH_CH24 /*!< I/O pin PE9 connection to COMP1 non-inverting input */ +#define COMP_NONINVERTINGINPUT_PE10 RI_IOSWITCH_CH25 /*!< I/O pin PE10 connection to COMP1 non-inverting input */ + +#endif /* STM32L100xB || STM32L151xB || STM32L152xB || STM32L100xBA || STM32L151xBA || STM32L152xBA */ + +#if defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) +#define IS_COMP_NONINVERTINGINPUT(INPUT) (((INPUT) == COMP_NONINVERTINGINPUT_PB4) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_PB5) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_PB6) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_PB7) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_NONE) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_PA0) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_PA1) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_PA2) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_PA3) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_PA4) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_PA5) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_PA6) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_PA7) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_PB0) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_PB1) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_PC0) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_PC1) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_PC2) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_PC3) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_PC4) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_PC5) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_PB12) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_PB13) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_PB14) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_PB15) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_PE7) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_PE8) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_PE9) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_PE10) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_PF6) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_PF7) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_PF8) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_PF9) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_PF10) ) +#endif /* STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ + +#if defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) +#define IS_COMP_NONINVERTINGINPUT(INPUT) (((INPUT) == COMP_NONINVERTINGINPUT_PB4) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_PB5) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_PB6) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_PB7) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_NONE) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_PA0) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_PA1) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_PA2) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_PA3) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_PA4) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_PA5) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_PA6) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_PA7) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_PB0) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_PB1) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_PC0) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_PC1) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_PC2) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_PC3) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_PC4) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_PC5) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_PB12) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_PB13) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_PB14) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_PB15) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_PE7) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_PE8) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_PE9) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_PE10) ) +#endif /* STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC */ + +#if defined(STM32L100xB) || defined (STM32L151xB) || defined (STM32L152xB) || defined(STM32L100xBA) || defined (STM32L151xBA) || defined (STM32L152xBA) +#define IS_COMP_NONINVERTINGINPUT(INPUT) (((INPUT) == COMP_NONINVERTINGINPUT_PB4) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_PB5) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_NONE) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_PA0) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_PA1) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_PA2) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_PA3) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_PA4) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_PA5) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_PA6) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_PA7) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_PB0) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_PB1) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_PC0) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_PC1) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_PC2) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_PC3) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_PC4) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_PC5) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_PB12) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_PB13) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_PB14) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_PB15) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_PE7) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_PE8) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_PE9) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_PE10) ) +#endif /* STM32L100xB || STM32L151xB || STM32L152xB || STM32L100xBA || STM32L151xBA || STM32L152xBA */ + +/** + * @} + */ + +/** + * @} + */ + + +/* Exported macro ------------------------------------------------------------*/ + +/** @defgroup COMPEx_Private_Macro COMP Private Macro + * @{ + */ + +/** + * @brief Specifies whether Routing Interface (RI) needs to be configured for + * switches of comparator non-inverting input. + * @param __HANDLE__: COMP handle. + * @retval None. + */ +#if defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) +#define __COMP_ROUTING_INTERFACE_TOBECONFIGURED(__HANDLE__) \ + (((__HANDLE__)->Init.NonInvertingInput != COMP_NONINVERTINGINPUT_NONE) && \ + (READ_BIT(COMP->CSR, COMP_CSR_SW1) == RESET) ) +#else +#define __COMP_ROUTING_INTERFACE_TOBECONFIGURED(__HANDLE__) \ + ((__HANDLE__)->Init.NonInvertingInput != COMP_NONINVERTINGINPUT_NONE) +#endif /* STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ + +/** + * @} + */ + + + +/* Exported functions --------------------------------------------------------*/ + + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32L1xx_HAL_COMP_EX_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_conf_template.h b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_conf_template.h new file mode 100755 index 0000000..a8f7d1d --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_conf_template.h @@ -0,0 +1,291 @@ +/** + ****************************************************************************** + * @file stm32l1xx_hal_conf.h + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief HAL configuration template file. + * This file should be copied to the application folder and renamed + * to stm32l1xx_hal_conf.h. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L1xx_HAL_CONF_H +#define __STM32L1xx_HAL_CONF_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/* ########################## Module Selection ############################## */ +/** + * @brief This is the list of modules to be used in the HAL driver + */ +#define HAL_MODULE_ENABLED +#define HAL_ADC_MODULE_ENABLED +#define HAL_COMP_MODULE_ENABLED +#define HAL_CORTEX_MODULE_ENABLED +#define HAL_CRC_MODULE_ENABLED +#define HAL_CRYP_MODULE_ENABLED +#define HAL_DAC_MODULE_ENABLED +#define HAL_DMA_MODULE_ENABLED +#define HAL_FLASH_MODULE_ENABLED +#define HAL_GPIO_MODULE_ENABLED +#define HAL_I2C_MODULE_ENABLED +#define HAL_I2S_MODULE_ENABLED +#define HAL_IRDA_MODULE_ENABLED +#define HAL_IWDG_MODULE_ENABLED +#define HAL_LCD_MODULE_ENABLED +#define HAL_NOR_MODULE_ENABLED +#define HAL_OPAMP_MODULE_ENABLED +#define HAL_PCD_MODULE_ENABLED +#define HAL_PWR_MODULE_ENABLED +#define HAL_RCC_MODULE_ENABLED +#define HAL_RTC_MODULE_ENABLED +#define HAL_SD_MODULE_ENABLED +#define HAL_SMARTCARD_MODULE_ENABLED +#define HAL_SPI_MODULE_ENABLED +#define HAL_SRAM_MODULE_ENABLED +#define HAL_TIM_MODULE_ENABLED +#define HAL_UART_MODULE_ENABLED +#define HAL_USART_MODULE_ENABLED +#define HAL_WWDG_MODULE_ENABLED + +/* ########################## Oscillator Values adaptation ####################*/ +/** + * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSE is used as system clock source, directly or through the PLL). + */ +#if !defined (HSE_VALUE) + #define HSE_VALUE ((uint32_t)8000000) /*!< Value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (HSE_STARTUP_TIMEOUT) + #define HSE_STARTUP_TIMEOUT ((uint32_t)100) /*!< Time out for HSE start up, in ms */ +#endif /* HSE_STARTUP_TIMEOUT */ + +/** + * @brief Internal Multiple Speed oscillator (MSI) default value. + * This value is the default MSI range value after Reset. + */ +#if !defined (MSI_VALUE) + #define MSI_VALUE ((uint32_t)2097000) /*!< Value of the Internal oscillator in Hz*/ +#endif /* MSI_VALUE */ +/** + * @brief Internal High Speed oscillator (HSI) value. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSI is used as system clock source, directly or through the PLL). + */ +#if !defined (HSI_VALUE) + #define HSI_VALUE ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +/** + * @brief External Low Speed oscillator (LSE) value. + * This value is used by the UART, RTC HAL module to compute the system frequency + */ +#if !defined (LSE_VALUE) + #define LSE_VALUE ((uint32_t)32768) /*!< Value of the External oscillator in Hz*/ +#endif /* LSE_VALUE */ + + +#if !defined (LSE_STARTUP_TIMEOUT) + #define LSE_STARTUP_TIMEOUT ((uint32_t)5000) /*!< Time out for LSE start up, in ms */ +#endif /* HSE_STARTUP_TIMEOUT */ + + +/* Tip: To avoid modifying this file each time you need to use different HSE, + === you can define the HSE value in your toolchain compiler preprocessor. */ + +/* ########################### System Configuration ######################### */ +/** + * @brief This is the HAL system configuration section + */ +#define VDD_VALUE ((uint32_t)3300) /*!< Value of VDD in mv */ +#define TICK_INT_PRIORITY ((uint32_t)0x000F) /*!< tick interrupt priority */ +#define USE_RTOS 0 +#define PREFETCH_ENABLE 1 +#define INSTRUCTION_CACHE_ENABLE 0 +#define DATA_CACHE_ENABLE 0 + +/* ########################## Assert Selection ############################## */ +/** + * @brief Uncomment the line below to expanse the "assert_param" macro in the + * HAL drivers code + */ +/*#define USE_FULL_ASSERT 1*/ + +/* Includes ------------------------------------------------------------------*/ +/** + * @brief Include module's header file + */ + +#ifdef HAL_RCC_MODULE_ENABLED + #include "stm32l1xx_hal_rcc.h" +#endif /* HAL_RCC_MODULE_ENABLED */ + +#ifdef HAL_GPIO_MODULE_ENABLED + #include "stm32l1xx_hal_gpio.h" +#endif /* HAL_GPIO_MODULE_ENABLED */ + +#ifdef HAL_DMA_MODULE_ENABLED + #include "stm32l1xx_hal_dma.h" +#endif /* HAL_DMA_MODULE_ENABLED */ + +#ifdef HAL_CORTEX_MODULE_ENABLED + #include "stm32l1xx_hal_cortex.h" +#endif /* HAL_CORTEX_MODULE_ENABLED */ + +#ifdef HAL_ADC_MODULE_ENABLED + #include "stm32l1xx_hal_adc.h" +#endif /* HAL_ADC_MODULE_ENABLED */ + +#ifdef HAL_COMP_MODULE_ENABLED + #include "stm32l1xx_hal_comp.h" +#endif /* HAL_COMP_MODULE_ENABLED */ + +#ifdef HAL_CRC_MODULE_ENABLED + #include "stm32l1xx_hal_crc.h" +#endif /* HAL_CRC_MODULE_ENABLED */ + +#ifdef HAL_CRYP_MODULE_ENABLED + #include "stm32l1xx_hal_cryp.h" +#endif /* HAL_CRYP_MODULE_ENABLED */ + +#ifdef HAL_DAC_MODULE_ENABLED + #include "stm32l1xx_hal_dac.h" +#endif /* HAL_DAC_MODULE_ENABLED */ + +#ifdef HAL_FLASH_MODULE_ENABLED + #include "stm32l1xx_hal_flash.h" +#endif /* HAL_FLASH_MODULE_ENABLED */ + +#ifdef HAL_SRAM_MODULE_ENABLED + #include "stm32l1xx_hal_sram.h" +#endif /* HAL_SRAM_MODULE_ENABLED */ + +#ifdef HAL_NOR_MODULE_ENABLED + #include "stm32l1xx_hal_nor.h" +#endif /* HAL_NOR_MODULE_ENABLED */ + +#ifdef HAL_I2C_MODULE_ENABLED + #include "stm32l1xx_hal_i2c.h" +#endif /* HAL_I2C_MODULE_ENABLED */ + +#ifdef HAL_I2S_MODULE_ENABLED + #include "stm32l1xx_hal_i2s.h" +#endif /* HAL_I2S_MODULE_ENABLED */ + +#ifdef HAL_IWDG_MODULE_ENABLED + #include "stm32l1xx_hal_iwdg.h" +#endif /* HAL_IWDG_MODULE_ENABLED */ + +#ifdef HAL_LCD_MODULE_ENABLED + #include "stm32l1xx_hal_lcd.h" +#endif /* HAL_LCD_MODULE_ENABLED */ + +#ifdef HAL_OPAMP_MODULE_ENABLED + #include "stm32l1xx_hal_opamp.h" +#endif /* HAL_OPAMP_MODULE_ENABLED */ + +#ifdef HAL_PWR_MODULE_ENABLED + #include "stm32l1xx_hal_pwr.h" +#endif /* HAL_PWR_MODULE_ENABLED */ + +#ifdef HAL_RTC_MODULE_ENABLED + #include "stm32l1xx_hal_rtc.h" +#endif /* HAL_RTC_MODULE_ENABLED */ + +#ifdef HAL_SD_MODULE_ENABLED + #include "stm32l1xx_hal_sd.h" +#endif /* HAL_SD_MODULE_ENABLED */ + +#ifdef HAL_SPI_MODULE_ENABLED + #include "stm32l1xx_hal_spi.h" +#endif /* HAL_SPI_MODULE_ENABLED */ + +#ifdef HAL_TIM_MODULE_ENABLED + #include "stm32l1xx_hal_tim.h" +#endif /* HAL_TIM_MODULE_ENABLED */ + +#ifdef HAL_UART_MODULE_ENABLED + #include "stm32l1xx_hal_uart.h" +#endif /* HAL_UART_MODULE_ENABLED */ + +#ifdef HAL_USART_MODULE_ENABLED + #include "stm32l1xx_hal_usart.h" +#endif /* HAL_USART_MODULE_ENABLED */ + +#ifdef HAL_IRDA_MODULE_ENABLED + #include "stm32l1xx_hal_irda.h" +#endif /* HAL_IRDA_MODULE_ENABLED */ + +#ifdef HAL_SMARTCARD_MODULE_ENABLED + #include "stm32l1xx_hal_smartcard.h" +#endif /* HAL_SMARTCARD_MODULE_ENABLED */ + +#ifdef HAL_WWDG_MODULE_ENABLED + #include "stm32l1xx_hal_wwdg.h" +#endif /* HAL_WWDG_MODULE_ENABLED */ + +#ifdef HAL_PCD_MODULE_ENABLED + #include "stm32l1xx_hal_pcd.h" +#endif /* HAL_PCD_MODULE_ENABLED */ + +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT +/** + * @brief The assert_param macro is used for function's parameters check. + * @param expr: If expr is false, it calls assert_failed function + * which reports the name of the source file and the source + * line number of the call that failed. + * If expr is true, it returns no value. + * @retval None + */ + #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ + void assert_failed(uint8_t* file, uint32_t line); +#else + #define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32L1xx_HAL_CONF_H */ + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_cortex.h b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_cortex.h new file mode 100755 index 0000000..5ee0645 --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_cortex.h @@ -0,0 +1,486 @@ +/** + ****************************************************************************** + * @file stm32l1xx_hal_cortex.h + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief Header file of CORTEX HAL module. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L1xx_HAL_CORTEX_H +#define __STM32L1xx_HAL_CORTEX_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_hal_def.h" + +/** @addtogroup STM32L1xx_HAL_Driver + * @{ + */ + +/** @addtogroup CORTEX + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup CORTEX_Exported_Types Cortex Exported Types + * @{ + */ + +#if (__MPU_PRESENT == 1) +/** @defgroup CORTEX_MPU_Region_Initialization_Structure_definition MPU Region Initialization Structure Definition + * @brief MPU Region initialization structure + * @{ + */ +typedef struct +{ + uint8_t Enable; /*!< Specifies the status of the region. + This parameter can be a value of @ref CORTEX_MPU_Region_Enable */ + uint8_t Number; /*!< Specifies the number of the region to protect. + This parameter can be a value of @ref CORTEX_MPU_Region_Number */ + uint32_t BaseAddress; /*!< Specifies the base address of the region to protect. */ + uint8_t Size; /*!< Specifies the size of the region to protect. + This parameter can be a value of @ref CORTEX_MPU_Region_Size */ + uint8_t SubRegionDisable; /*!< Specifies the number of the subregion protection to disable. + This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF */ + uint8_t TypeExtField; /*!< Specifies the TEX field level. + This parameter can be a value of @ref CORTEX_MPU_TEX_Levels */ + uint8_t AccessPermission; /*!< Specifies the region access permission type. + This parameter can be a value of @ref CORTEX_MPU_Region_Permission_Attributes */ + uint8_t DisableExec; /*!< Specifies the instruction access status. + This parameter can be a value of @ref CORTEX_MPU_Instruction_Access */ + uint8_t IsShareable; /*!< Specifies the shareability status of the protected region. + This parameter can be a value of @ref CORTEX_MPU_Access_Shareable */ + uint8_t IsCacheable; /*!< Specifies the cacheable status of the region protected. + This parameter can be a value of @ref CORTEX_MPU_Access_Cacheable */ + uint8_t IsBufferable; /*!< Specifies the bufferable status of the protected region. + This parameter can be a value of @ref CORTEX_MPU_Access_Bufferable */ +}MPU_Region_InitTypeDef; +/** + * @} + */ +#endif /* __MPU_PRESENT */ + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup CORTEX_Exported_Constants CORTEX Exported Constants + * @{ + */ + + +/** @defgroup CORTEX_Preemption_Priority_Group CORTEX Preemption Priority Group + * @{ + */ + +#define NVIC_PRIORITYGROUP_0 ((uint32_t)0x00000007) /*!< 0 bits for pre-emption priority + 4 bits for subpriority */ +#define NVIC_PRIORITYGROUP_1 ((uint32_t)0x00000006) /*!< 1 bits for pre-emption priority + 3 bits for subpriority */ +#define NVIC_PRIORITYGROUP_2 ((uint32_t)0x00000005) /*!< 2 bits for pre-emption priority + 2 bits for subpriority */ +#define NVIC_PRIORITYGROUP_3 ((uint32_t)0x00000004) /*!< 3 bits for pre-emption priority + 1 bits for subpriority */ +#define NVIC_PRIORITYGROUP_4 ((uint32_t)0x00000003) /*!< 4 bits for pre-emption priority + 0 bits for subpriority */ +/** + * @} + */ + +/** @defgroup CORTEX_SysTick_clock_source CORTEX SysTick clock source + * @{ + */ +#define SYSTICK_CLKSOURCE_HCLK_DIV8 ((uint32_t)0x00000000) +#define SYSTICK_CLKSOURCE_HCLK ((uint32_t)0x00000004) + +/** + * @} + */ + +#if (__MPU_PRESENT == 1) +/** @defgroup CORTEX_MPU_HFNMI_PRIVDEF_Control MPU HFNMI and PRIVILEGED Access control + * @{ + */ +#define MPU_HFNMI_PRIVDEF_NONE ((uint32_t)0x00000000) +#define MPU_HARDFAULT_NMI ((uint32_t)0x00000002) +#define MPU_PRIVILEGED_DEFAULT ((uint32_t)0x00000004) +#define MPU_HFNMI_PRIVDEF ((uint32_t)0x00000006) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Region_Enable CORTEX MPU Region Enable + * @{ + */ +#define MPU_REGION_ENABLE ((uint8_t)0x01) +#define MPU_REGION_DISABLE ((uint8_t)0x00) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Instruction_Access CORTEX MPU Instruction Access + * @{ + */ +#define MPU_INSTRUCTION_ACCESS_ENABLE ((uint8_t)0x00) +#define MPU_INSTRUCTION_ACCESS_DISABLE ((uint8_t)0x01) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Access_Shareable CORTEX MPU Instruction Access Shareable + * @{ + */ +#define MPU_ACCESS_SHAREABLE ((uint8_t)0x01) +#define MPU_ACCESS_NOT_SHAREABLE ((uint8_t)0x00) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Access_Cacheable CORTEX MPU Instruction Access Cacheable + * @{ + */ +#define MPU_ACCESS_CACHEABLE ((uint8_t)0x01) +#define MPU_ACCESS_NOT_CACHEABLE ((uint8_t)0x00) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Access_Bufferable CORTEX MPU Instruction Access Bufferable + * @{ + */ +#define MPU_ACCESS_BUFFERABLE ((uint8_t)0x01) +#define MPU_ACCESS_NOT_BUFFERABLE ((uint8_t)0x00) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_TEX_Levels MPU TEX Levels + * @{ + */ +#define MPU_TEX_LEVEL0 ((uint8_t)0x00) +#define MPU_TEX_LEVEL1 ((uint8_t)0x01) +#define MPU_TEX_LEVEL2 ((uint8_t)0x02) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Region_Size CORTEX MPU Region Size + * @{ + */ +#define MPU_REGION_SIZE_32B ((uint8_t)0x04) +#define MPU_REGION_SIZE_64B ((uint8_t)0x05) +#define MPU_REGION_SIZE_128B ((uint8_t)0x06) +#define MPU_REGION_SIZE_256B ((uint8_t)0x07) +#define MPU_REGION_SIZE_512B ((uint8_t)0x08) +#define MPU_REGION_SIZE_1KB ((uint8_t)0x09) +#define MPU_REGION_SIZE_2KB ((uint8_t)0x0A) +#define MPU_REGION_SIZE_4KB ((uint8_t)0x0B) +#define MPU_REGION_SIZE_8KB ((uint8_t)0x0C) +#define MPU_REGION_SIZE_16KB ((uint8_t)0x0D) +#define MPU_REGION_SIZE_32KB ((uint8_t)0x0E) +#define MPU_REGION_SIZE_64KB ((uint8_t)0x0F) +#define MPU_REGION_SIZE_128KB ((uint8_t)0x10) +#define MPU_REGION_SIZE_256KB ((uint8_t)0x11) +#define MPU_REGION_SIZE_512KB ((uint8_t)0x12) +#define MPU_REGION_SIZE_1MB ((uint8_t)0x13) +#define MPU_REGION_SIZE_2MB ((uint8_t)0x14) +#define MPU_REGION_SIZE_4MB ((uint8_t)0x15) +#define MPU_REGION_SIZE_8MB ((uint8_t)0x16) +#define MPU_REGION_SIZE_16MB ((uint8_t)0x17) +#define MPU_REGION_SIZE_32MB ((uint8_t)0x18) +#define MPU_REGION_SIZE_64MB ((uint8_t)0x19) +#define MPU_REGION_SIZE_128MB ((uint8_t)0x1A) +#define MPU_REGION_SIZE_256MB ((uint8_t)0x1B) +#define MPU_REGION_SIZE_512MB ((uint8_t)0x1C) +#define MPU_REGION_SIZE_1GB ((uint8_t)0x1D) +#define MPU_REGION_SIZE_2GB ((uint8_t)0x1E) +#define MPU_REGION_SIZE_4GB ((uint8_t)0x1F) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Region_Permission_Attributes CORTEX MPU Region Permission Attributes + * @{ + */ +#define MPU_REGION_NO_ACCESS ((uint8_t)0x00) +#define MPU_REGION_PRIV_RW ((uint8_t)0x01) +#define MPU_REGION_PRIV_RW_URO ((uint8_t)0x02) +#define MPU_REGION_FULL_ACCESS ((uint8_t)0x03) +#define MPU_REGION_PRIV_RO ((uint8_t)0x05) +#define MPU_REGION_PRIV_RO_URO ((uint8_t)0x06) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Region_Number CORTEX MPU Region Number + * @{ + */ +#define MPU_REGION_NUMBER0 ((uint8_t)0x00) +#define MPU_REGION_NUMBER1 ((uint8_t)0x01) +#define MPU_REGION_NUMBER2 ((uint8_t)0x02) +#define MPU_REGION_NUMBER3 ((uint8_t)0x03) +#define MPU_REGION_NUMBER4 ((uint8_t)0x04) +#define MPU_REGION_NUMBER5 ((uint8_t)0x05) +#define MPU_REGION_NUMBER6 ((uint8_t)0x06) +#define MPU_REGION_NUMBER7 ((uint8_t)0x07) +/** + * @} + */ +#endif /* __MPU_PRESENT */ +/** + * @} + */ + +/* Exported Macros -----------------------------------------------------------*/ +/** @defgroup CORTEX_Exported_Macros CORTEX Exported Macros + * @{ + */ + +/** @defgroup CORTEX_Preemption_Priority_Group_Macro CORTEX Preemption Priority Group + * @{ + */ +#define IS_NVIC_PRIORITY_GROUP(GROUP) (((GROUP) == NVIC_PRIORITYGROUP_0) || \ + ((GROUP) == NVIC_PRIORITYGROUP_1) || \ + ((GROUP) == NVIC_PRIORITYGROUP_2) || \ + ((GROUP) == NVIC_PRIORITYGROUP_3) || \ + ((GROUP) == NVIC_PRIORITYGROUP_4)) + +#define IS_NVIC_PREEMPTION_PRIORITY(PRIORITY) ((PRIORITY) < 0x10) + +#define IS_NVIC_SUB_PRIORITY(PRIORITY) ((PRIORITY) < 0x10) + +#define IS_NVIC_DEVICE_IRQ(IRQ) ((IRQ) >= 0x00) + +/** + * @} + */ + +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/** @defgroup CORTEX_Private_Macros CORTEX Private Macros + * @{ + */ + +/** @defgroup CORTEX_SysTick_clock_source_Macro_Private CORTEX SysTick clock source + * @{ + */ +#define IS_SYSTICK_CLK_SOURCE(SOURCE) (((SOURCE) == SYSTICK_CLKSOURCE_HCLK) || \ + ((SOURCE) == SYSTICK_CLKSOURCE_HCLK_DIV8)) +/** + * @} + */ + +#if (__MPU_PRESENT == 1) +#define IS_MPU_REGION_ENABLE(STATE) (((STATE) == MPU_REGION_ENABLE) || \ + ((STATE) == MPU_REGION_DISABLE)) + +#define IS_MPU_INSTRUCTION_ACCESS(STATE) (((STATE) == MPU_INSTRUCTION_ACCESS_ENABLE) || \ + ((STATE) == MPU_INSTRUCTION_ACCESS_DISABLE)) + +#define IS_MPU_ACCESS_SHAREABLE(STATE) (((STATE) == MPU_ACCESS_SHAREABLE) || \ + ((STATE) == MPU_ACCESS_NOT_SHAREABLE)) + +#define IS_MPU_ACCESS_CACHEABLE(STATE) (((STATE) == MPU_ACCESS_CACHEABLE) || \ + ((STATE) == MPU_ACCESS_NOT_CACHEABLE)) + +#define IS_MPU_ACCESS_BUFFERABLE(STATE) (((STATE) == MPU_ACCESS_BUFFERABLE) || \ + ((STATE) == MPU_ACCESS_NOT_BUFFERABLE)) + +#define IS_MPU_TEX_LEVEL(TYPE) (((TYPE) == MPU_TEX_LEVEL0) || \ + ((TYPE) == MPU_TEX_LEVEL1) || \ + ((TYPE) == MPU_TEX_LEVEL2)) + +#define IS_MPU_REGION_PERMISSION_ATTRIBUTE(TYPE) (((TYPE) == MPU_REGION_NO_ACCESS) || \ + ((TYPE) == MPU_REGION_PRIV_RW) || \ + ((TYPE) == MPU_REGION_PRIV_RW_URO) || \ + ((TYPE) == MPU_REGION_FULL_ACCESS) || \ + ((TYPE) == MPU_REGION_PRIV_RO) || \ + ((TYPE) == MPU_REGION_PRIV_RO_URO)) + +#define IS_MPU_REGION_NUMBER(NUMBER) (((NUMBER) == MPU_REGION_NUMBER0) || \ + ((NUMBER) == MPU_REGION_NUMBER1) || \ + ((NUMBER) == MPU_REGION_NUMBER2) || \ + ((NUMBER) == MPU_REGION_NUMBER3) || \ + ((NUMBER) == MPU_REGION_NUMBER4) || \ + ((NUMBER) == MPU_REGION_NUMBER5) || \ + ((NUMBER) == MPU_REGION_NUMBER6) || \ + ((NUMBER) == MPU_REGION_NUMBER7)) + +#define IS_MPU_REGION_SIZE(SIZE) (((SIZE) == MPU_REGION_SIZE_32B) || \ + ((SIZE) == MPU_REGION_SIZE_64B) || \ + ((SIZE) == MPU_REGION_SIZE_128B) || \ + ((SIZE) == MPU_REGION_SIZE_256B) || \ + ((SIZE) == MPU_REGION_SIZE_512B) || \ + ((SIZE) == MPU_REGION_SIZE_1KB) || \ + ((SIZE) == MPU_REGION_SIZE_2KB) || \ + ((SIZE) == MPU_REGION_SIZE_4KB) || \ + ((SIZE) == MPU_REGION_SIZE_8KB) || \ + ((SIZE) == MPU_REGION_SIZE_16KB) || \ + ((SIZE) == MPU_REGION_SIZE_32KB) || \ + ((SIZE) == MPU_REGION_SIZE_64KB) || \ + ((SIZE) == MPU_REGION_SIZE_128KB) || \ + ((SIZE) == MPU_REGION_SIZE_256KB) || \ + ((SIZE) == MPU_REGION_SIZE_512KB) || \ + ((SIZE) == MPU_REGION_SIZE_1MB) || \ + ((SIZE) == MPU_REGION_SIZE_2MB) || \ + ((SIZE) == MPU_REGION_SIZE_4MB) || \ + ((SIZE) == MPU_REGION_SIZE_8MB) || \ + ((SIZE) == MPU_REGION_SIZE_16MB) || \ + ((SIZE) == MPU_REGION_SIZE_32MB) || \ + ((SIZE) == MPU_REGION_SIZE_64MB) || \ + ((SIZE) == MPU_REGION_SIZE_128MB) || \ + ((SIZE) == MPU_REGION_SIZE_256MB) || \ + ((SIZE) == MPU_REGION_SIZE_512MB) || \ + ((SIZE) == MPU_REGION_SIZE_1GB) || \ + ((SIZE) == MPU_REGION_SIZE_2GB) || \ + ((SIZE) == MPU_REGION_SIZE_4GB)) + +#define IS_MPU_SUB_REGION_DISABLE(SUBREGION) ((SUBREGION) < (uint16_t)0x00FF) +#endif /* __MPU_PRESENT */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @defgroup CORTEX_Private_Functions CORTEX Private Functions + * @brief CORTEX private functions + * @{ + */ + +#if (__MPU_PRESENT == 1) +/** + * @brief Disables the MPU + * @retval None + */ +__STATIC_INLINE void HAL_MPU_Disable(void) +{ + /* Disable fault exceptions */ + SCB->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk; + + /* Disable the MPU */ + MPU->CTRL &= ~MPU_CTRL_ENABLE_Msk; +} + +/** + * @brief Enables the MPU + * @param MPU_Control: Specifies the control mode of the MPU during hard fault, + * NMI, FAULTMASK and privileged accessto the default memory + * This parameter can be one of the following values: + * @arg MPU_HFNMI_PRIVDEF_NONE + * @arg MPU_HARDFAULT_NMI + * @arg MPU_PRIVILEGED_DEFAULT + * @arg MPU_HFNMI_PRIVDEF + * @retval None + */ +__STATIC_INLINE void HAL_MPU_Enable(uint32_t MPU_Control) +{ + /* Enable the MPU */ + MPU->CTRL = MPU_Control | MPU_CTRL_ENABLE_Msk; + + /* Enable fault exceptions */ + SCB->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk; +} +#endif /* __MPU_PRESENT */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup CORTEX_Exported_Functions + * @{ + */ + +/** @addtogroup CORTEX_Exported_Functions_Group1 + * @{ + */ +/* Initialization and de-initialization functions *****************************/ +void HAL_NVIC_SetPriorityGrouping(uint32_t PriorityGroup); +void HAL_NVIC_SetPriority(IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t SubPriority); +void HAL_NVIC_EnableIRQ(IRQn_Type IRQn); +void HAL_NVIC_DisableIRQ(IRQn_Type IRQn); +void HAL_NVIC_SystemReset(void); +uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb); +/** + * @} + */ + +/** @addtogroup CORTEX_Exported_Functions_Group2 + * @{ + */ +/* Peripheral Control functions ***********************************************/ +#if (__MPU_PRESENT == 1) +void HAL_MPU_ConfigRegion(MPU_Region_InitTypeDef *MPU_Init); +#endif /* __MPU_PRESENT */ +uint32_t HAL_NVIC_GetPriorityGrouping(void); +void HAL_NVIC_GetPriority(IRQn_Type IRQn, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority); +uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn); +void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn); +void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn); +uint32_t HAL_NVIC_GetActive(IRQn_Type IRQn); +void HAL_SYSTICK_CLKSourceConfig(uint32_t CLKSource); +void HAL_SYSTICK_IRQHandler(void); +void HAL_SYSTICK_Callback(void); +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32L1xx_HAL_CORTEX_H */ + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_crc.h b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_crc.h new file mode 100755 index 0000000..a154146 --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_crc.h @@ -0,0 +1,192 @@ +/** + ****************************************************************************** + * @file stm32l1xx_hal_crc.h + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief Header file of CRC HAL module. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L1xx_HAL_CRC_H +#define __STM32L1xx_HAL_CRC_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_hal_def.h" + +/** @addtogroup STM32L1xx_HAL_Driver + * @{ + */ + +/** @addtogroup CRC + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup CRC_Exported_Types CRC Exported Types + * @{ + */ + +/** + * @brief CRC HAL State Structure definition + */ +typedef enum +{ + HAL_CRC_STATE_RESET = 0x00, /*!< CRC not yet initialized or disabled */ + HAL_CRC_STATE_READY = 0x01, /*!< CRC initialized and ready for use */ + HAL_CRC_STATE_BUSY = 0x02, /*!< CRC internal process is ongoing */ + HAL_CRC_STATE_TIMEOUT = 0x03, /*!< CRC timeout state */ + HAL_CRC_STATE_ERROR = 0x04 /*!< CRC error state */ + +}HAL_CRC_StateTypeDef; + +/** + * @brief CRC handle Structure definition + */ +typedef struct +{ + CRC_TypeDef *Instance; /*!< Register base address */ + + HAL_LockTypeDef Lock; /*!< CRC locking object */ + + __IO HAL_CRC_StateTypeDef State; /*!< CRC communication state */ + +}CRC_HandleTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/* Exported macro ------------------------------------------------------------*/ + +/** @defgroup CRC_Exported_Macros CRC Exported Macros + * @{ + */ + +/** @brief Reset CRC handle state + * @param __HANDLE__: CRC handle + * @retval None + */ +#define __HAL_CRC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_CRC_STATE_RESET) + +/** + * @brief Resets CRC Data Register. + * @param __HANDLE__: CRC handle + * @retval None + */ +#define __HAL_CRC_DR_RESET(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR,CRC_CR_RESET)) + +/** + * @brief Stores a 8-bit data in the Independent Data(ID) register. + * @param __HANDLE__: CRC handle + * @param __VALUE__: 8-bit value to be stored in the ID register + * @retval None + */ +#define __HAL_CRC_SET_IDR(__HANDLE__, __VALUE__) (WRITE_REG((__HANDLE__)->Instance->IDR, (__VALUE__))) + +/** + * @brief Returns the 8-bit data stored in the Independent Data(ID) register. + * @param __HANDLE__: CRC handle + * @retval 8-bit value of the ID register + */ +#define __HAL_CRC_GET_IDR(__HANDLE__) (((__HANDLE__)->Instance->IDR) & CRC_IDR_IDR) + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup CRC_Exported_Functions + * @{ + */ + +/** @addtogroup CRC_Exported_Functions_Group1 + * @{ + */ + +/* Initialization/de-initialization functions **********************************/ +HAL_StatusTypeDef HAL_CRC_Init(CRC_HandleTypeDef *hcrc); +HAL_StatusTypeDef HAL_CRC_DeInit (CRC_HandleTypeDef *hcrc); +void HAL_CRC_MspInit(CRC_HandleTypeDef *hcrc); +void HAL_CRC_MspDeInit(CRC_HandleTypeDef *hcrc); + +/** + * @} + */ + +/** @addtogroup CRC_Exported_Functions_Group2 + * @{ + */ + +/** @addtogroup CRC_Exported_Functions_Group3 + ** @{ + */ +/* Peripheral Control functions ************************************************/ +uint32_t HAL_CRC_Accumulate(CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength); +uint32_t HAL_CRC_Calculate(CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength); + +/* Peripheral State functions **************************************************/ +HAL_CRC_StateTypeDef HAL_CRC_GetState(CRC_HandleTypeDef *hcrc); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32L1xx_HAL_CRC_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_cryp.h b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_cryp.h new file mode 100755 index 0000000..8c09586 --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_cryp.h @@ -0,0 +1,418 @@ +/** + ****************************************************************************** + * @file stm32l1xx_hal_cryp.h + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief Header file of CRYP HAL module. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L1xx_HAL_CRYP_H +#define __STM32L1xx_HAL_CRYP_H + +#ifdef __cplusplus + extern "C" { +#endif + +#if defined(STM32L162xC) || defined(STM32L162xCA) || defined(STM32L162xD) || defined(STM32L162xE) || defined(STM32L162xDX) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_hal_def.h" + +/** @addtogroup STM32L1xx_HAL_Driver + * @{ + */ + +/** @addtogroup CRYP + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup CRYP_Exported_Types CRYP Exported Types + * @{ + */ + +/** + * @brief CRYP Configuration Structure definition + */ +typedef struct +{ + uint32_t DataType; /*!< 32-bit data, 16-bit data, 8-bit data or 1-bit string. + This parameter can be a value of @ref CRYP_Data_Type */ + + uint8_t* pKey; /*!< The key used for encryption/decryption */ + + uint8_t* pInitVect; /*!< The initialization vector used also as initialization + counter in CTR mode */ + +}CRYP_InitTypeDef; + +/** + * @brief HAL CRYP State structures definition + */ +typedef enum +{ + HAL_CRYP_STATE_RESET = 0x00, /*!< CRYP not yet initialized or disabled */ + HAL_CRYP_STATE_READY = 0x01, /*!< CRYP initialized and ready for use */ + HAL_CRYP_STATE_BUSY = 0x02, /*!< CRYP internal processing is ongoing */ + HAL_CRYP_STATE_TIMEOUT = 0x03, /*!< CRYP timeout state */ + HAL_CRYP_STATE_ERROR = 0x04 /*!< CRYP error state */ + +}HAL_CRYP_STATETypeDef; + +/** + * @brief HAL CRYP phase structures definition + */ +typedef enum +{ + HAL_CRYP_PHASE_READY = 0x01, /*!< CRYP peripheral is ready for initialization. */ + HAL_CRYP_PHASE_PROCESS = 0x02, /*!< CRYP peripheral is in processing phase */ +}HAL_PhaseTypeDef; + +/** + * @brief CRYP handle Structure definition + */ +typedef struct +{ + AES_TypeDef *Instance; /*!< Register base address */ + + CRYP_InitTypeDef Init; /*!< CRYP required parameters */ + + uint8_t *pCrypInBuffPtr; /*!< Pointer to CRYP processing (encryption, decryption,...) buffer */ + + uint8_t *pCrypOutBuffPtr; /*!< Pointer to CRYP processing (encryption, decryption,...) buffer */ + + __IO uint16_t CrypInCount; /*!< Counter of inputed data */ + + __IO uint16_t CrypOutCount; /*!< Counter of outputed data */ + + HAL_StatusTypeDef Status; /*!< CRYP peripheral status */ + + HAL_PhaseTypeDef Phase; /*!< CRYP peripheral phase */ + + DMA_HandleTypeDef *hdmain; /*!< CRYP In DMA handle parameters */ + + DMA_HandleTypeDef *hdmaout; /*!< CRYP Out DMA handle parameters */ + + HAL_LockTypeDef Lock; /*!< CRYP locking object */ + + __IO HAL_CRYP_STATETypeDef State; /*!< CRYP peripheral state */ + +}CRYP_HandleTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup CRYP_Exported_Constants CRYP Exported Constants + * @{ + */ + +/** @defgroup CRYP_Data_Type CRYP Data Type + * @{ + */ +#define CRYP_DATATYPE_32B ((uint32_t)0x00000000) +#define CRYP_DATATYPE_16B AES_CR_DATATYPE_0 +#define CRYP_DATATYPE_8B AES_CR_DATATYPE_1 +#define CRYP_DATATYPE_1B AES_CR_DATATYPE + +#define IS_CRYP_DATATYPE(DATATYPE) (((DATATYPE) == CRYP_DATATYPE_32B) || \ + ((DATATYPE) == CRYP_DATATYPE_16B) || \ + ((DATATYPE) == CRYP_DATATYPE_8B) || \ + ((DATATYPE) == CRYP_DATATYPE_1B)) +/** + * @} + */ + +/** @defgroup CRYP_AlgoModeDirection CRYP Algo Mode Direction + * @{ + */ +#define CRYP_CR_ALGOMODE_DIRECTION (uint32_t)(AES_CR_MODE|AES_CR_CHMOD) + +#define CRYP_CR_ALGOMODE_AES_ECB_ENCRYPT ((uint32_t)0x00000000) +#define CRYP_CR_ALGOMODE_AES_ECB_KEYDERDECRYPT (AES_CR_MODE) +#define CRYP_CR_ALGOMODE_AES_CBC_ENCRYPT (AES_CR_CHMOD_0) +#define CRYP_CR_ALGOMODE_AES_CBC_KEYDERDECRYPT ((uint32_t)(AES_CR_CHMOD_0|AES_CR_MODE)) +#define CRYP_CR_ALGOMODE_AES_CTR_ENCRYPT (AES_CR_CHMOD_1) +#define CRYP_CR_ALGOMODE_AES_CTR_DECRYPT ((uint32_t)(AES_CR_CHMOD_1 | AES_CR_MODE_1)) +/** + * @} + */ + +/** @defgroup CRYP_AES_Interrupts AES Interrupts + * @{ + */ +#define CRYP_IT_CC AES_CR_CCIE /*!< Computation Complete interrupt */ +#define CRYP_IT_ERR AES_CR_ERRIE /*!< Error interrupt */ + +/** + * @} + */ + + +/** @defgroup CRYP_AES_Flags AES Flags + * @{ + */ +#define CRYP_FLAG_CCF AES_SR_CCF /*!< Computation Complete Flag */ +#define CRYP_FLAG_RDERR AES_SR_RDERR /*!< Read Error Flag */ +#define CRYP_FLAG_WRERR AES_SR_WRERR /*!< Write Error Flag */ + +/** + * @} + */ + +/** @defgroup CRYP_AES_Clear_Flags AES Clear Flags + * @{ + */ +#define CRYP_CLEARFLAG_CCF AES_CR_CCFC /*!< Computation Complete Flag Clear */ +#define CRYP_CLEARFLAG_RDERR AES_CR_ERRC /*!< Read Error Clear */ +#define CRYP_CLEARFLAG_WRERR AES_CR_ERRC /*!< Write Error Clear */ + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ + +/** @defgroup CRYP_Exported_Macros CRYP Exported Macros + * @{ + */ + +/** @brief Reset CRYP handle state + * @param __HANDLE__: specifies the CRYP handle. + * @retval None + */ +#define __HAL_CRYP_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_CRYP_STATE_RESET) + +/** + * @brief Enable/Disable the CRYP peripheral. + * @param __HANDLE__: specifies the CRYP handle. + * @retval None + */ +#define __HAL_CRYP_ENABLE(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CR, AES_CR_EN) +#define __HAL_CRYP_DISABLE(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CR, AES_CR_EN) + +/** + * @brief Set the algorithm mode: AES-ECB, AES-CBC, AES-CTR, DES-ECB, DES-CBC,... + * @param __HANDLE__: specifies the CRYP handle. + * @param __MODE__: The algorithm mode. + * @retval None + */ +#define __HAL_CRYP_SET_MODE(__HANDLE__,__MODE__) SET_BIT((__HANDLE__)->Instance->CR, (__MODE__)) + + +/** @brief Check whether the specified CRYP flag is set or not. + * @param __HANDLE__: specifies the CRYP handle. + * @param __FLAG__: specifies the flag to check. + * This parameter can be one of the following values: + * @arg CRYP_FLAG_CCF : Computation Complete Flag + * @arg CRYP_FLAG_RDERR : Read Error Flag + * @arg CRYP_FLAG_WRERR : Write Error Flag + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_CRYP_GET_FLAG(__HANDLE__,__FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__)) + +/** @brief Clear the CRYP pending flag. + * @param __HANDLE__: specifies the CRYP handle. + * @param __FLAG__: specifies the flag to clear. + * This parameter can be one of the following values: + * @arg CRYP_CLEARFLAG_CCF : Computation Complete Clear Flag + * @arg CRYP_CLEARFLAG_RDERR : Read Error Clear + * @arg CRYP_CLEARFLAG_WRERR : Write Error Clear + * @retval None + */ +#define __HAL_CRYP_CLEAR_FLAG(__HANDLE__, __FLAG__) SET_BIT((__HANDLE__)->Instance->CR, (__FLAG__)) + +/** + * @brief Enable the CRYP interrupt. + * @param __HANDLE__: specifies the CRYP handle. + * @param __INTERRUPT__: CRYP Interrupt. + * @retval None + */ +#define __HAL_CRYP_ENABLE_IT(__HANDLE__,__INTERRUPT__) SET_BIT((__HANDLE__)->Instance->CR, (__INTERRUPT__)) + +/** + * @brief Disable the CRYP interrupt. + * @param __HANDLE__: specifies the CRYP handle. + * @param __INTERRUPT__: CRYP interrupt. + * @retval None + */ +#define __HAL_CRYP_DISABLE_IT(__HANDLE__,__INTERRUPT__) CLEAR_BIT((__HANDLE__)->Instance->CR, (__INTERRUPT__)) + +/** @brief Checks if the specified CRYP interrupt source is enabled or disabled. + * @param __HANDLE__: specifies the CRYP handle. + * @param __INTERRUPT__: CRYP interrupt source to check + * This parameter can be one of the following values: + * @arg CRYP_IT_CC : Computation Complete interrupt + * @arg CRYP_IT_ERR : Error interrupt (used for RDERR and WRERR) + * @retval State of interruption (SET or RESET) + */ +#define __HAL_CRYP_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) \ + (( ((__HANDLE__)->Instance->CR & (__INTERRUPT__)) == (__INTERRUPT__) \ + )? SET : RESET \ + ) + +/** @brief Clear the CRYP pending IT. + * @param __HANDLE__: specifies the CRYP handle. + * @param __IT__: specifies the IT to clear. + * This parameter can be one of the following values: + * @arg CRYP_CLEARFLAG_CCF : Computation Complete Clear Flag + * @arg CRYP_CLEARFLAG_RDERR : Read Error Clear + * @arg CRYP_CLEARFLAG_WRERR : Write Error Clear + * @retval None + */ +#define __HAL_CRYP_CLEAR_IT(__HANDLE__, __IT__) SET_BIT((__HANDLE__)->Instance->CR, (__IT__)) + +/** + * @} + */ + +/* Include CRYP HAL Extension module */ +#include "stm32l1xx_hal_cryp_ex.h" + +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup CRYP_Exported_Functions + * @{ + */ + +/** @addtogroup CRYP_Exported_Functions_Group1 + * @{ + */ + +/* Initialization/de-initialization functions *********************************/ +HAL_StatusTypeDef HAL_CRYP_Init(CRYP_HandleTypeDef *hcryp); +HAL_StatusTypeDef HAL_CRYP_DeInit(CRYP_HandleTypeDef *hcryp); + +/* MSP functions *************************************************************/ +void HAL_CRYP_MspInit(CRYP_HandleTypeDef *hcryp); +void HAL_CRYP_MspDeInit(CRYP_HandleTypeDef *hcryp); + +/** + * @} + */ + +/** @addtogroup CRYP_Exported_Functions_Group2 + * @{ + */ + +/* AES encryption/decryption using polling ***********************************/ +HAL_StatusTypeDef HAL_CRYP_AESECB_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout); +HAL_StatusTypeDef HAL_CRYP_AESECB_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout); +HAL_StatusTypeDef HAL_CRYP_AESCBC_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout); +HAL_StatusTypeDef HAL_CRYP_AESCBC_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout); +HAL_StatusTypeDef HAL_CRYP_AESCTR_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout); +HAL_StatusTypeDef HAL_CRYP_AESCTR_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout); + +/* AES encryption/decryption using interrupt *********************************/ +HAL_StatusTypeDef HAL_CRYP_AESECB_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData); +HAL_StatusTypeDef HAL_CRYP_AESCBC_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData); +HAL_StatusTypeDef HAL_CRYP_AESCTR_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData); +HAL_StatusTypeDef HAL_CRYP_AESECB_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData); +HAL_StatusTypeDef HAL_CRYP_AESCTR_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData); +HAL_StatusTypeDef HAL_CRYP_AESCBC_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData); + +/* AES encryption/decryption using DMA ***************************************/ +HAL_StatusTypeDef HAL_CRYP_AESECB_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData); +HAL_StatusTypeDef HAL_CRYP_AESECB_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData); +HAL_StatusTypeDef HAL_CRYP_AESCBC_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData); +HAL_StatusTypeDef HAL_CRYP_AESCBC_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData); +HAL_StatusTypeDef HAL_CRYP_AESCTR_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData); +HAL_StatusTypeDef HAL_CRYP_AESCTR_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData); + +/** + * @} + */ + +/** @addtogroup CRYP_Exported_Functions_Group3 + * @{ + */ + +/* CallBack functions ********************************************************/ +void HAL_CRYP_InCpltCallback(CRYP_HandleTypeDef *hcryp); +void HAL_CRYP_OutCpltCallback(CRYP_HandleTypeDef *hcryp); +void HAL_CRYP_ErrorCallback(CRYP_HandleTypeDef *hcryp); + +/** + * @} + */ + +/** @addtogroup CRYP_Exported_Functions_Group4 + * @{ + */ + +/* Processing functions ********************************************************/ +void HAL_CRYP_IRQHandler(CRYP_HandleTypeDef *hcryp); + +/** + * @} + */ + +/** @addtogroup CRYP_Exported_Functions_Group5 + * @{ + */ + +/* Peripheral State functions **************************************************/ +HAL_CRYP_STATETypeDef HAL_CRYP_GetState(CRYP_HandleTypeDef *hcryp); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* STM32L162xC || STM32L162xCA || STM32L162xD || STM32L162xE || STM32L162xDX*/ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32L1xx_HAL_CRYP_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_cryp_ex.h b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_cryp_ex.h new file mode 100755 index 0000000..d6fdefa --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_cryp_ex.h @@ -0,0 +1,98 @@ +/** + ****************************************************************************** + * @file stm32l1xx_hal_cryp_ex.h + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief Header file of CRYPEx HAL module. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L1xx_HAL_CRYP_EX_H +#define __STM32L1xx_HAL_CRYP_EX_H + +#ifdef __cplusplus + extern "C" { +#endif + +#if defined(STM32L162xC) || defined(STM32L162xCA) || defined(STM32L162xD) || defined(STM32L162xE) || defined(STM32L162xDX) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_hal_def.h" + +/** @addtogroup STM32L1xx_HAL_Driver + * @{ + */ + +/** @addtogroup CRYPEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup CRYPEx_Exported_Functions + * @{ + */ + +/** @addtogroup CRYPEx_Exported_Functions_Group1 + * @{ + */ + +/* CallBack functions ********************************************************/ +void HAL_CRYPEx_ComputationCpltCallback(CRYP_HandleTypeDef *hcryp); + +/** + * @} + */ + +/** + * @} + */ + +#endif /* STM32L162xC || STM32L162xCA || STM32L162xD || STM32L162xE || STM32L162xDX*/ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32L1xx_HAL_CRYP_EX_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_dac.h b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_dac.h new file mode 100755 index 0000000..309c6f7 --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_dac.h @@ -0,0 +1,404 @@ +/** + ****************************************************************************** + * @file stm32l1xx_hal_dac.h + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief Header file of DAC HAL module. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L1xx_HAL_DAC_H +#define __STM32L1xx_HAL_DAC_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_hal_def.h" + +/** @addtogroup STM32L1xx_HAL_Driver + * @{ + */ + +/** @addtogroup DAC + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup DAC_Exported_Types DAC Exported Types + * @{ + */ + +/** + * @brief HAL State structures definition + */ +typedef enum +{ + HAL_DAC_STATE_RESET = 0x00, /*!< DAC not yet initialized or disabled */ + HAL_DAC_STATE_READY = 0x01, /*!< DAC initialized and ready for use */ + HAL_DAC_STATE_BUSY = 0x02, /*!< DAC internal processing is ongoing */ + HAL_DAC_STATE_TIMEOUT = 0x03, /*!< DAC timeout state */ + HAL_DAC_STATE_ERROR = 0x04 /*!< DAC error state */ + +}HAL_DAC_StateTypeDef; + +/** + * @brief DAC handle Structure definition + */ +typedef struct +{ + DAC_TypeDef *Instance; /*!< Register base address */ + + __IO HAL_DAC_StateTypeDef State; /*!< DAC communication state */ + + HAL_LockTypeDef Lock; /*!< DAC locking object */ + + DMA_HandleTypeDef *DMA_Handle1; /*!< Pointer DMA handler for channel 1 */ + + DMA_HandleTypeDef *DMA_Handle2; /*!< Pointer DMA handler for channel 2 */ + + __IO uint32_t ErrorCode; /*!< DAC Error code */ + +}DAC_HandleTypeDef; + +/** + * @brief DAC Configuration regular Channel structure definition + */ +typedef struct +{ + uint32_t DAC_Trigger; /*!< Specifies the external trigger for the selected DAC channel. + This parameter can be a value of @ref DAC_trigger_selection */ + + uint32_t DAC_OutputBuffer; /*!< Specifies whether the DAC channel output buffer is enabled or disabled. + This parameter can be a value of @ref DAC_output_buffer */ + +}DAC_ChannelConfTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup DAC_Exported_Constants DAC Exported Constants + * @{ + */ + +/** @defgroup DAC_Error_Code DAC Error Code + * @{ + */ +#define HAL_DAC_ERROR_NONE 0x00 /*!< No error */ +#define HAL_DAC_ERROR_DMAUNDERRUNCH1 0x01 /*!< DAC channel1 DMA underrun error */ +#define HAL_DAC_ERROR_DMAUNDERRUNCH2 0x02 /*!< DAC channel2 DMA underrun error */ +#define HAL_DAC_ERROR_DMA 0x04 /*!< DMA error */ +/** + * @} + */ + +/** @defgroup DAC_trigger_selection DAC trigger selection + * @{ + */ +#define DAC_TRIGGER_NONE ((uint32_t)0x00000000) /*!< Conversion is automatic once the DAC1_DHRxxxx register + has been loaded, and not by external trigger */ +#define DAC_TRIGGER_T6_TRGO ((uint32_t) DAC_CR_TEN1) /*!< TIM6 TRGO selected as external conversion trigger for DAC channel */ +#define DAC_TRIGGER_T7_TRGO ((uint32_t)( DAC_CR_TSEL1_1 | DAC_CR_TEN1)) /*!< TIM7 TRGO selected as external conversion trigger for DAC channel */ +#define DAC_TRIGGER_T9_TRGO ((uint32_t)( DAC_CR_TSEL1_1 | DAC_CR_TSEL1_0 | DAC_CR_TEN1)) /*!< TIM9 TRGO selected as external conversion trigger for DAC channel */ +#define DAC_TRIGGER_T2_TRGO ((uint32_t)(DAC_CR_TSEL1_2 | DAC_CR_TEN1)) /*!< TIM2 TRGO selected as external conversion trigger for DAC channel */ +#define DAC_TRIGGER_T4_TRGO ((uint32_t)(DAC_CR_TSEL1_2 | DAC_CR_TSEL1_0 | DAC_CR_TEN1)) /*!< TIM4 TRGO selected as external conversion trigger for DAC channel */ +#define DAC_TRIGGER_EXT_IT9 ((uint32_t)(DAC_CR_TSEL1_2 | DAC_CR_TSEL1_1 | DAC_CR_TEN1)) /*!< EXTI Line9 event selected as external conversion trigger for DAC channel */ +#define DAC_TRIGGER_SOFTWARE ((uint32_t)(DAC_CR_TSEL1 | DAC_CR_TEN1)) /*!< Conversion started by software trigger for DAC channel */ + +/** + * @} + */ + +/** @defgroup DAC_output_buffer DAC output buffer + * @{ + */ +#define DAC_OUTPUTBUFFER_ENABLE ((uint32_t)0x00000000) +#define DAC_OUTPUTBUFFER_DISABLE ((uint32_t)DAC_CR_BOFF1) + +/** + * @} + */ + +/** @defgroup DAC_Channel_selection DAC Channel selection + * @{ + */ +#define DAC_CHANNEL_1 ((uint32_t)0x00000000) +#define DAC_CHANNEL_2 ((uint32_t)0x00000010) + +/** + * @} + */ + +/** @defgroup DAC_data_alignement DAC data alignement + * @{ + */ +#define DAC_ALIGN_12B_R ((uint32_t)0x00000000) +#define DAC_ALIGN_12B_L ((uint32_t)0x00000004) +#define DAC_ALIGN_8B_R ((uint32_t)0x00000008) + +/** + * @} + */ + +/** @defgroup DAC_flags_definition DAC flags definition + * @{ + */ +#define DAC_FLAG_DMAUDR1 ((uint32_t)DAC_SR_DMAUDR1) +#define DAC_FLAG_DMAUDR2 ((uint32_t)DAC_SR_DMAUDR2) + +/** + * @} + */ + +/** @defgroup DAC_IT_definition DAC IT definition + * @{ + */ +#define DAC_IT_DMAUDR1 ((uint32_t)DAC_SR_DMAUDR1) +#define DAC_IT_DMAUDR2 ((uint32_t)DAC_SR_DMAUDR2) + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ + +/** @defgroup DAC_Exported_Macros DAC Exported Macros + * @{ + */ + +/** @brief Reset DAC handle state + * @param __HANDLE__: specifies the DAC handle. + * @retval None + */ +#define __HAL_DAC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DAC_STATE_RESET) + +/** @brief Enable the DAC channel + * @param __HANDLE__: specifies the DAC handle. + * @param __DAC_Channel__: specifies the DAC channel + * @retval None + */ +#define __HAL_DAC_ENABLE(__HANDLE__, __DAC_Channel__) \ +((__HANDLE__)->Instance->CR |= (DAC_CR_EN1 << (__DAC_Channel__))) + +/** @brief Disable the DAC channel + * @param __HANDLE__: specifies the DAC handle + * @param __DAC_Channel__: specifies the DAC channel. + * @retval None + */ +#define __HAL_DAC_DISABLE(__HANDLE__, __DAC_Channel__) \ +((__HANDLE__)->Instance->CR &= ~(DAC_CR_EN1 << (__DAC_Channel__))) + + +/** @brief Enable the DAC interrupt + * @param __HANDLE__: specifies the DAC handle + * @param __INTERRUPT__: specifies the DAC interrupt. + * This parameter can be any combination of the following values: + * @arg DAC_IT_DMAUDR1: DAC channel 1 DMA underrun interrupt + * @arg DAC_IT_DMAUDR2: DAC channel 2 DMA underrun interrupt + * @retval None + */ +#define __HAL_DAC_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR) |= (__INTERRUPT__)) + +/** @brief Disable the DAC interrupt + * @param __HANDLE__: specifies the DAC handle + * @param __INTERRUPT__: specifies the DAC interrupt. + * This parameter can be any combination of the following values: + * @arg DAC_IT_DMAUDR1: DAC channel 1 DMA underrun interrupt + * @arg DAC_IT_DMAUDR2: DAC channel 2 DMA underrun interrupt + * @retval None + */ +#define __HAL_DAC_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR) &= ~(__INTERRUPT__)) + +/** @brief Checks if the specified DAC interrupt source is enabled or disabled. + * @param __HANDLE__: DAC handle + * @param __INTERRUPT__: DAC interrupt source to check + * This parameter can be any combination of the following values: + * @arg DAC_IT_DMAUDR1: DAC channel 1 DMA underrun interrupt + * @arg DAC_IT_DMAUDR2: DAC channel 2 DMA underrun interrupt + * @retval State of interruption (SET or RESET) + */ +#define __HAL_DAC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR & (__INTERRUPT__)) == (__INTERRUPT__)) + +/** @brief Get the selected DAC's flag status. + * @param __HANDLE__: specifies the DAC handle. + * @param __FLAG__: specifies the DAC flag to get. + * This parameter can be any combination of the following values: + * @arg DAC_FLAG_DMAUDR1: DAC channel 1 DMA underrun flag + * @arg DAC_FLAG_DMAUDR2: DAC channel 2 DMA underrun flag + * @retval None + */ +#define __HAL_DAC_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__)) + +/** @brief Clear the DAC's flag. + * @param __HANDLE__: specifies the DAC handle. + * @param __FLAG__: specifies the DAC flag to clear. + * This parameter can be any combination of the following values: + * @arg DAC_FLAG_DMAUDR1: DAC channel 1 DMA underrun flag + * @arg DAC_FLAG_DMAUDR2: DAC channel 2 DMA underrun flag + * @retval None + */ +#define __HAL_DAC_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR) = (__FLAG__)) + +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ + +/** @defgroup DAC_Private_Macros DAC Private Macros + * @{ + */ +#define IS_DAC_TRIGGER(TRIGGER) (((TRIGGER) == DAC_TRIGGER_NONE) || \ + ((TRIGGER) == DAC_TRIGGER_T6_TRGO) || \ + ((TRIGGER) == DAC_TRIGGER_T7_TRGO) || \ + ((TRIGGER) == DAC_TRIGGER_T9_TRGO) || \ + ((TRIGGER) == DAC_TRIGGER_T2_TRGO) || \ + ((TRIGGER) == DAC_TRIGGER_T4_TRGO) || \ + ((TRIGGER) == DAC_TRIGGER_EXT_IT9) || \ + ((TRIGGER) == DAC_TRIGGER_SOFTWARE)) + +#define IS_DAC_OUTPUT_BUFFER_STATE(STATE) (((STATE) == DAC_OUTPUTBUFFER_ENABLE) || \ + ((STATE) == DAC_OUTPUTBUFFER_DISABLE)) + +#define IS_DAC_CHANNEL(CHANNEL) (((CHANNEL) == DAC_CHANNEL_1) || \ + ((CHANNEL) == DAC_CHANNEL_2)) + +#define IS_DAC_ALIGN(ALIGN) (((ALIGN) == DAC_ALIGN_12B_R) || \ + ((ALIGN) == DAC_ALIGN_12B_L) || \ + ((ALIGN) == DAC_ALIGN_8B_R)) + +#define IS_DAC_DATA(DATA) ((DATA) <= 0xFFF0) + +#define DAC_DHR12R1_ALIGNMENT(__ALIGNMENT__) (((uint32_t)0x00000008) + (__ALIGNMENT__)) + +#define DAC_DHR12R2_ALIGNMENT(__ALIGNMENT__) (((uint32_t)0x00000014) + (__ALIGNMENT__)) + +#define DAC_DHR12RD_ALIGNMENT(__ALIGNMENT__) (((uint32_t)0x00000020) + (__ALIGNMENT__)) + +/** + * @} + */ + + +/* Include DAC HAL Extension module */ +#include "stm32l1xx_hal_dac_ex.h" + +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup DAC_Exported_Functions + * @{ + */ + +/** @addtogroup DAC_Exported_Functions_Group1 + * @{ + */ +/* Initialization and de-initialization functions *****************************/ +HAL_StatusTypeDef HAL_DAC_Init(DAC_HandleTypeDef* hdac); +HAL_StatusTypeDef HAL_DAC_DeInit(DAC_HandleTypeDef* hdac); +void HAL_DAC_MspInit(DAC_HandleTypeDef* hdac); +void HAL_DAC_MspDeInit(DAC_HandleTypeDef* hdac); + +/** + * @} + */ + +/** @addtogroup DAC_Exported_Functions_Group2 + * @{ + */ +/* IO operation functions *****************************************************/ +HAL_StatusTypeDef HAL_DAC_Start(DAC_HandleTypeDef* hdac, uint32_t Channel); +HAL_StatusTypeDef HAL_DAC_Stop(DAC_HandleTypeDef* hdac, uint32_t Channel); +HAL_StatusTypeDef HAL_DAC_Start_DMA(DAC_HandleTypeDef* hdac, uint32_t Channel, uint32_t* pData, uint32_t Length, uint32_t Alignment); +HAL_StatusTypeDef HAL_DAC_Stop_DMA(DAC_HandleTypeDef* hdac, uint32_t Channel); +HAL_StatusTypeDef HAL_DAC_SetValue(DAC_HandleTypeDef* hdac, uint32_t Channel, uint32_t Alignment, uint32_t Data); +uint32_t HAL_DAC_GetValue(DAC_HandleTypeDef* hdac, uint32_t Channel); + +/** + * @} + */ + +/** @addtogroup DAC_Exported_Functions_Group2 + * @{ + */ +/* Peripheral Control functions ***********************************************/ +HAL_StatusTypeDef HAL_DAC_ConfigChannel(DAC_HandleTypeDef* hdac, DAC_ChannelConfTypeDef* sConfig, uint32_t Channel); + +/** + * @} + */ + +/** @addtogroup DAC_Exported_Functions_Group2 + * @{ + */ +/* Peripheral State functions *************************************************/ +HAL_DAC_StateTypeDef HAL_DAC_GetState(DAC_HandleTypeDef* hdac); +void HAL_DAC_IRQHandler(DAC_HandleTypeDef* hdac); +uint32_t HAL_DAC_GetError(DAC_HandleTypeDef *hdac); + +void HAL_DAC_ConvCpltCallbackCh1(DAC_HandleTypeDef* hdac); +void HAL_DAC_ConvHalfCpltCallbackCh1(DAC_HandleTypeDef* hdac); +void HAL_DAC_ErrorCallbackCh1(DAC_HandleTypeDef *hdac); +void HAL_DAC_DMAUnderrunCallbackCh1(DAC_HandleTypeDef *hdac); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /*__STM32L1xx_HAL_DAC_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_dac_ex.h b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_dac_ex.h new file mode 100755 index 0000000..a73bb3a --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_dac_ex.h @@ -0,0 +1,190 @@ +/** + ****************************************************************************** + * @file stm32l1xx_hal_dac_ex.h + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief Header file of DAC HAL Extension module. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L1xx_HAL_DAC_EX_H +#define __STM32L1xx_HAL_DAC_EX_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_hal_def.h" + +/** @addtogroup STM32L1xx_HAL_Driver + * @{ + */ + +/** @addtogroup DACEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup DACEx_Exported_Constants DACEx Exported Constants + * @{ + */ + +/** @defgroup DACEx_lfsrunmask_triangleamplitude DACEx lfsrunmask triangleamplitude + * @{ + */ +#define DAC_LFSRUNMASK_BIT0 ((uint32_t)0x00000000) /*!< Unmask DAC channel LFSR bit0 for noise wave generation */ +#define DAC_LFSRUNMASK_BITS1_0 ((uint32_t)DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[1:0] for noise wave generation */ +#define DAC_LFSRUNMASK_BITS2_0 ((uint32_t)DAC_CR_MAMP1_1) /*!< Unmask DAC channel LFSR bit[2:0] for noise wave generation */ +#define DAC_LFSRUNMASK_BITS3_0 ((uint32_t)DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0)/*!< Unmask DAC channel LFSR bit[3:0] for noise wave generation */ +#define DAC_LFSRUNMASK_BITS4_0 ((uint32_t)DAC_CR_MAMP1_2) /*!< Unmask DAC channel LFSR bit[4:0] for noise wave generation */ +#define DAC_LFSRUNMASK_BITS5_0 ((uint32_t)DAC_CR_MAMP1_2 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[5:0] for noise wave generation */ +#define DAC_LFSRUNMASK_BITS6_0 ((uint32_t)DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1) /*!< Unmask DAC channel LFSR bit[6:0] for noise wave generation */ +#define DAC_LFSRUNMASK_BITS7_0 ((uint32_t)DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[7:0] for noise wave generation */ +#define DAC_LFSRUNMASK_BITS8_0 ((uint32_t)DAC_CR_MAMP1_3) /*!< Unmask DAC channel LFSR bit[8:0] for noise wave generation */ +#define DAC_LFSRUNMASK_BITS9_0 ((uint32_t)DAC_CR_MAMP1_3 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[9:0] for noise wave generation */ +#define DAC_LFSRUNMASK_BITS10_0 ((uint32_t)DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1) /*!< Unmask DAC channel LFSR bit[10:0] for noise wave generation */ +#define DAC_LFSRUNMASK_BITS11_0 ((uint32_t)DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[11:0] for noise wave generation */ +#define DAC_TRIANGLEAMPLITUDE_1 ((uint32_t)0x00000000) /*!< Select max triangle amplitude of 1 */ +#define DAC_TRIANGLEAMPLITUDE_3 ((uint32_t)DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 3 */ +#define DAC_TRIANGLEAMPLITUDE_7 ((uint32_t)DAC_CR_MAMP1_1) /*!< Select max triangle amplitude of 7 */ +#define DAC_TRIANGLEAMPLITUDE_15 ((uint32_t)DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 15 */ +#define DAC_TRIANGLEAMPLITUDE_31 ((uint32_t)DAC_CR_MAMP1_2) /*!< Select max triangle amplitude of 31 */ +#define DAC_TRIANGLEAMPLITUDE_63 ((uint32_t)DAC_CR_MAMP1_2 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 63 */ +#define DAC_TRIANGLEAMPLITUDE_127 ((uint32_t)DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1) /*!< Select max triangle amplitude of 127 */ +#define DAC_TRIANGLEAMPLITUDE_255 ((uint32_t)DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 255 */ +#define DAC_TRIANGLEAMPLITUDE_511 ((uint32_t)DAC_CR_MAMP1_3) /*!< Select max triangle amplitude of 511 */ +#define DAC_TRIANGLEAMPLITUDE_1023 ((uint32_t)DAC_CR_MAMP1_3 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 1023 */ +#define DAC_TRIANGLEAMPLITUDE_2047 ((uint32_t)DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1) /*!< Select max triangle amplitude of 2047 */ +#define DAC_TRIANGLEAMPLITUDE_4095 ((uint32_t)DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 4095 */ + +#define IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(VALUE) (((VALUE) == DAC_LFSRUNMASK_BIT0) || \ + ((VALUE) == DAC_LFSRUNMASK_BITS1_0) || \ + ((VALUE) == DAC_LFSRUNMASK_BITS2_0) || \ + ((VALUE) == DAC_LFSRUNMASK_BITS3_0) || \ + ((VALUE) == DAC_LFSRUNMASK_BITS4_0) || \ + ((VALUE) == DAC_LFSRUNMASK_BITS5_0) || \ + ((VALUE) == DAC_LFSRUNMASK_BITS6_0) || \ + ((VALUE) == DAC_LFSRUNMASK_BITS7_0) || \ + ((VALUE) == DAC_LFSRUNMASK_BITS8_0) || \ + ((VALUE) == DAC_LFSRUNMASK_BITS9_0) || \ + ((VALUE) == DAC_LFSRUNMASK_BITS10_0) || \ + ((VALUE) == DAC_LFSRUNMASK_BITS11_0) || \ + ((VALUE) == DAC_TRIANGLEAMPLITUDE_1) || \ + ((VALUE) == DAC_TRIANGLEAMPLITUDE_3) || \ + ((VALUE) == DAC_TRIANGLEAMPLITUDE_7) || \ + ((VALUE) == DAC_TRIANGLEAMPLITUDE_15) || \ + ((VALUE) == DAC_TRIANGLEAMPLITUDE_31) || \ + ((VALUE) == DAC_TRIANGLEAMPLITUDE_63) || \ + ((VALUE) == DAC_TRIANGLEAMPLITUDE_127) || \ + ((VALUE) == DAC_TRIANGLEAMPLITUDE_255) || \ + ((VALUE) == DAC_TRIANGLEAMPLITUDE_511) || \ + ((VALUE) == DAC_TRIANGLEAMPLITUDE_1023) || \ + ((VALUE) == DAC_TRIANGLEAMPLITUDE_2047) || \ + ((VALUE) == DAC_TRIANGLEAMPLITUDE_4095)) +/** + * @} + */ + +/** @defgroup DACEx_wave_generation DACEx wave generation + * @{ + */ +#define DAC_WAVE_NOISE ((uint32_t)DAC_CR_WAVE1_0) +#define DAC_WAVE_TRIANGLE ((uint32_t)DAC_CR_WAVE1_1) + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup DACEx_Exported_Functions + * @{ + */ + +/** @addtogroup DACEx_Exported_Functions_Group1 + * @{ + */ +/* Extension features functions ***********************************************/ +uint32_t HAL_DACEx_DualGetValue(DAC_HandleTypeDef* hdac); +HAL_StatusTypeDef HAL_DACEx_TriangleWaveGenerate(DAC_HandleTypeDef* hdac, uint32_t Channel, uint32_t Amplitude); +HAL_StatusTypeDef HAL_DACEx_NoiseWaveGenerate(DAC_HandleTypeDef* hdac, uint32_t Channel, uint32_t Amplitude); +HAL_StatusTypeDef HAL_DACEx_DualSetValue(DAC_HandleTypeDef* hdac, uint32_t Alignment, uint32_t Data1, uint32_t Data2); + +void HAL_DACEx_ConvCpltCallbackCh2(DAC_HandleTypeDef* hdac); +void HAL_DACEx_ConvHalfCpltCallbackCh2(DAC_HandleTypeDef* hdac); +void HAL_DACEx_ErrorCallbackCh2(DAC_HandleTypeDef* hdac); +void HAL_DACEx_DMAUnderrunCallbackCh2(DAC_HandleTypeDef* hdac); + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup DACEx_Private_Functions + * @{ + */ +void DAC_DMAConvCpltCh2(DMA_HandleTypeDef *hdma); +void DAC_DMAHalfConvCpltCh2(DMA_HandleTypeDef *hdma); +void DAC_DMAErrorCh2(DMA_HandleTypeDef *hdma); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /*__STM32L1xx_HAL_DAC_EX_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_def.h b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_def.h new file mode 100755 index 0000000..7852173 --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_def.h @@ -0,0 +1,213 @@ +/** + ****************************************************************************** + * @file stm32l1xx_hal_def.h + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief This file contains HAL common defines, enumeration, macros and + * structures definitions. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L1xx_HAL_DEF +#define __STM32L1xx_HAL_DEF + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx.h" +#include "Legacy/stm32_hal_legacy.h" +#include + +/* Exported types ------------------------------------------------------------*/ + +/** + * @brief HAL Status structures definition + */ +typedef enum +{ + HAL_OK = 0x00, + HAL_ERROR = 0x01, + HAL_BUSY = 0x02, + HAL_TIMEOUT = 0x03 +} HAL_StatusTypeDef; + +/** + * @brief HAL Lock structures definition + */ +typedef enum +{ + HAL_UNLOCKED = 0x00, + HAL_LOCKED = 0x01 +} HAL_LockTypeDef; + +/* Exported macro ------------------------------------------------------------*/ + +#define HAL_MAX_DELAY 0xFFFFFFFFU + +#define HAL_IS_BIT_SET(REG, BIT) (((REG) & (BIT)) != RESET) +#define HAL_IS_BIT_CLR(REG, BIT) (((REG) & (BIT)) == RESET) + +#define __HAL_LINKDMA(__HANDLE__, __PPP_DMA_FIELD_, __DMA_HANDLE_) \ + do{ \ + (__HANDLE__)->__PPP_DMA_FIELD_ = &(__DMA_HANDLE_); \ + (__DMA_HANDLE_).Parent = (__HANDLE__); \ + } while(0) + +#define UNUSED(x) ((void)(x)) + +/** @brief Reset the Handle's State field. + * @param __HANDLE__: specifies the Peripheral Handle. + * @note This macro can be used for the following purpose: + * - When the Handle is declared as local variable; before passing it as parameter + * to HAL_PPP_Init() for the first time, it is mandatory to use this macro + * to set to 0 the Handle's "State" field. + * Otherwise, "State" field may have any random value and the first time the function + * HAL_PPP_Init() is called, the low level hardware initialization will be missed + * (i.e. HAL_PPP_MspInit() will not be executed). + * - When there is a need to reconfigure the low level hardware: instead of calling + * HAL_PPP_DeInit() then HAL_PPP_Init(), user can make a call to this macro then HAL_PPP_Init(). + * In this later function, when the Handle's "State" field is set to 0, it will execute the function + * HAL_PPP_MspInit() which will reconfigure the low level hardware. + * @retval None + */ +#define __HAL_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = 0) + +#if (USE_RTOS == 1) + #error " USE_RTOS should be 0 in the current HAL release " +#else + #define __HAL_LOCK(__HANDLE__) \ + do{ \ + if((__HANDLE__)->Lock == HAL_LOCKED) \ + { \ + return HAL_BUSY; \ + } \ + else \ + { \ + (__HANDLE__)->Lock = HAL_LOCKED; \ + } \ + }while (0) + + #define __HAL_UNLOCK(__HANDLE__) \ + do{ \ + (__HANDLE__)->Lock = HAL_UNLOCKED; \ + }while (0) +#endif /* USE_RTOS */ + +#if defined ( __GNUC__ ) + #ifndef __weak + #define __weak __attribute__((weak)) + #endif /* __weak */ + #ifndef __packed + #define __packed __attribute__((__packed__)) + #endif /* __packed */ +#endif /* __GNUC__ */ + + +/* Macro to get variable aligned on 4-bytes, for __ICCARM__ the directive "#pragma data_alignment=4" must be used instead */ +#if defined (__GNUC__) /* GNU Compiler */ + #ifndef __ALIGN_END + #define __ALIGN_END __attribute__ ((aligned (4))) + #endif /* __ALIGN_END */ + #ifndef __ALIGN_BEGIN + #define __ALIGN_BEGIN + #endif /* __ALIGN_BEGIN */ +#else + #ifndef __ALIGN_END + #define __ALIGN_END + #endif /* __ALIGN_END */ + #ifndef __ALIGN_BEGIN + #if defined (__CC_ARM) /* ARM Compiler */ + #define __ALIGN_BEGIN __align(4) + #elif defined (__ICCARM__) /* IAR Compiler */ + #define __ALIGN_BEGIN + #endif /* __CC_ARM */ + #endif /* __ALIGN_BEGIN */ +#endif /* __GNUC__ */ + +/** + * @brief __RAM_FUNC definition + */ +#if defined ( __CC_ARM ) +/* ARM Compiler + ------------ + RAM functions are defined using the toolchain options. + Functions that are executed in RAM should reside in a separate source module. + Using the 'Options for File' dialog you can simply change the 'Code / Const' + area of a module to a memory space in physical RAM. + Available memory areas are declared in the 'Target' tab of the 'Options for Target' + dialog. +*/ +#define __RAM_FUNC HAL_StatusTypeDef + +#elif defined ( __ICCARM__ ) +/* ICCARM Compiler + --------------- + RAM functions are defined using a specific toolchain keyword "__ramfunc". +*/ +#define __RAM_FUNC __ramfunc HAL_StatusTypeDef + +#elif defined ( __GNUC__ ) +/* GNU Compiler + ------------ + RAM functions are defined using a specific toolchain attribute + "__attribute__((section(".RamFunc")))". +*/ +#define __RAM_FUNC HAL_StatusTypeDef __attribute__((section(".RamFunc"))) + +#endif + +/** + * @brief __NOINLINE definition + */ +#if defined ( __CC_ARM ) || defined ( __GNUC__ ) +/* ARM & GNUCompiler + ---------------- +*/ +#define __NOINLINE __attribute__ ( (noinline) ) + +#elif defined ( __ICCARM__ ) +/* ICCARM Compiler + --------------- +*/ +#define __NOINLINE _Pragma("optimize = no_inline") + +#endif + +#ifdef __cplusplus +} +#endif + +#endif /* ___STM32L1xx_HAL_DEF */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_dma.h b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_dma.h new file mode 100755 index 0000000..7c51928 --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_dma.h @@ -0,0 +1,695 @@ +/** + ****************************************************************************** + * @file stm32l1xx_hal_dma.h + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief Header file of DMA HAL module. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L1xx_HAL_DMA_H +#define __STM32L1xx_HAL_DMA_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_hal_def.h" + +/** @addtogroup STM32L1xx_HAL_Driver + * @{ + */ + +/** @addtogroup DMA + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup DMA_Exported_Types DMA Exported Types + * @{ + */ + +/** + * @brief DMA Configuration Structure definition + */ +typedef struct +{ + uint32_t Direction; /*!< Specifies if the data will be transferred from memory to peripheral, + from memory to memory or from peripheral to memory. + This parameter can be a value of @ref DMA_Data_transfer_direction */ + + uint32_t PeriphInc; /*!< Specifies whether the Peripheral address register should be incremented or not. + This parameter can be a value of @ref DMA_Peripheral_incremented_mode */ + + uint32_t MemInc; /*!< Specifies whether the memory address register should be incremented or not. + This parameter can be a value of @ref DMA_Memory_incremented_mode */ + + uint32_t PeriphDataAlignment; /*!< Specifies the Peripheral data width. + This parameter can be a value of @ref DMA_Peripheral_data_size */ + + uint32_t MemDataAlignment; /*!< Specifies the Memory data width. + This parameter can be a value of @ref DMA_Memory_data_size */ + + uint32_t Mode; /*!< Specifies the operation mode of the DMAy Channelx. + This parameter can be a value of @ref DMA_mode + @note The circular buffer mode cannot be used if the memory-to-memory + data transfer is configured on the selected Channel */ + + uint32_t Priority; /*!< Specifies the software priority for the DMAy Channelx. + This parameter can be a value of @ref DMA_Priority_level */ +} DMA_InitTypeDef; + +/** + * @brief HAL DMA State structures definition + */ +typedef enum +{ + HAL_DMA_STATE_RESET = 0x00, /*!< DMA not yet initialized or disabled */ + HAL_DMA_STATE_READY = 0x01, /*!< DMA initialized and ready for use */ + HAL_DMA_STATE_BUSY = 0x02, /*!< DMA process is ongoing */ + HAL_DMA_STATE_TIMEOUT = 0x03, /*!< DMA timeout state */ +}HAL_DMA_StateTypeDef; + +/** + * @brief HAL DMA Error Code structure definition + */ +typedef enum +{ + HAL_DMA_FULL_TRANSFER = 0x00, /*!< Full transfer */ + HAL_DMA_HALF_TRANSFER = 0x01 /*!< Half Transfer */ +}HAL_DMA_LevelCompleteTypeDef; + + +/** + * @brief HAL DMA Callback ID structure definition + */ +typedef enum +{ + HAL_DMA_XFER_CPLT_CB_ID = 0x00, /*!< Full transfer */ + HAL_DMA_XFER_HALFCPLT_CB_ID = 0x01, /*!< Half transfer */ + HAL_DMA_XFER_ERROR_CB_ID = 0x02, /*!< Error */ + HAL_DMA_XFER_ABORT_CB_ID = 0x03, /*!< Abort */ + HAL_DMA_XFER_ALL_CB_ID = 0x04 /*!< All */ + +}HAL_DMA_CallbackIDTypeDef; + +/** + * @brief DMA handle Structure definition + */ +typedef struct __DMA_HandleTypeDef +{ + DMA_Channel_TypeDef *Instance; /*!< Register base address */ + + DMA_InitTypeDef Init; /*!< DMA communication parameters */ + + HAL_LockTypeDef Lock; /*!< DMA locking object */ + + __IO HAL_DMA_StateTypeDef State; /*!< DMA transfer state */ + + void *Parent; /*!< Parent object state */ + + void (* XferCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer complete callback */ + + void (* XferHalfCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA Half transfer complete callback */ + + void (* XferErrorCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer error callback */ + + void (* XferAbortCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer abort callback */ + + __IO uint32_t ErrorCode; /*!< DMA Error code */ + + DMA_TypeDef *DmaBaseAddress; /*!< DMA Channel Base Address */ + + uint32_t ChannelIndex; /*!< DMA Channel Index */ + +} DMA_HandleTypeDef; +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup DMA_Exported_Constants DMA Exported Constants + * @{ + */ + +/** @defgroup DMA_Error_Code DMA Error Code + * @{ + */ +#define HAL_DMA_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */ +#define HAL_DMA_ERROR_TE ((uint32_t)0x00000001) /*!< Transfer error */ +#define HAL_DMA_ERROR_NO_XFER ((uint32_t)0x00000004) /*!< no ongoing transfer */ +#define HAL_DMA_ERROR_TIMEOUT ((uint32_t)0x00000020) /*!< Timeout error */ +#define HAL_DMA_ERROR_NOT_SUPPORTED ((uint32_t)0x00000100) /*!< Not supported mode */ +/** + * @} + */ + +/** @defgroup DMA_request DMA request + * @{ + */ +#define DMA_REQUEST_0 ((uint32_t)0x00000000) +#define DMA_REQUEST_1 ((uint32_t)0x00000001) +#define DMA_REQUEST_2 ((uint32_t)0x00000002) +#define DMA_REQUEST_3 ((uint32_t)0x00000003) +#define DMA_REQUEST_4 ((uint32_t)0x00000004) +#define DMA_REQUEST_5 ((uint32_t)0x00000005) +#define DMA_REQUEST_6 ((uint32_t)0x00000006) +#define DMA_REQUEST_7 ((uint32_t)0x00000007) + +/** + * @} + */ + +/** @defgroup DMA_Data_transfer_direction DMA Data transfer direction + * @{ + */ +#define DMA_PERIPH_TO_MEMORY ((uint32_t)0x00000000) /*!< Peripheral to memory direction */ +#define DMA_MEMORY_TO_PERIPH ((uint32_t)DMA_CCR_DIR) /*!< Memory to peripheral direction */ +#define DMA_MEMORY_TO_MEMORY ((uint32_t)DMA_CCR_MEM2MEM) /*!< Memory to memory direction */ + +/** + * @} + */ + +/** @defgroup DMA_Peripheral_incremented_mode DMA Peripheral incremented mode + * @{ + */ +#define DMA_PINC_ENABLE ((uint32_t)DMA_CCR_PINC) /*!< Peripheral increment mode Enable */ +#define DMA_PINC_DISABLE ((uint32_t)0x00000000) /*!< Peripheral increment mode Disable */ +/** + * @} + */ + +/** @defgroup DMA_Memory_incremented_mode DMA Memory incremented mode + * @{ + */ +#define DMA_MINC_ENABLE ((uint32_t)DMA_CCR_MINC) /*!< Memory increment mode Enable */ +#define DMA_MINC_DISABLE ((uint32_t)0x00000000) /*!< Memory increment mode Disable */ +/** + * @} + */ + +/** @defgroup DMA_Peripheral_data_size DMA Peripheral data size + * @{ + */ +#define DMA_PDATAALIGN_BYTE ((uint32_t)0x00000000) /*!< Peripheral data alignment: Byte */ +#define DMA_PDATAALIGN_HALFWORD ((uint32_t)DMA_CCR_PSIZE_0) /*!< Peripheral data alignment: HalfWord */ +#define DMA_PDATAALIGN_WORD ((uint32_t)DMA_CCR_PSIZE_1) /*!< Peripheral data alignment: Word */ +/** + * @} + */ + +/** @defgroup DMA_Memory_data_size DMA Memory data size + * @{ + */ +#define DMA_MDATAALIGN_BYTE ((uint32_t)0x00000000) /*!< Memory data alignment: Byte */ +#define DMA_MDATAALIGN_HALFWORD ((uint32_t)DMA_CCR_MSIZE_0) /*!< Memory data alignment: HalfWord */ +#define DMA_MDATAALIGN_WORD ((uint32_t)DMA_CCR_MSIZE_1) /*!< Memory data alignment: Word */ +/** + * @} + */ + +/** @defgroup DMA_mode DMA mode + * @{ + */ +#define DMA_NORMAL ((uint32_t)0x00000000) /*!< Normal mode */ +#define DMA_CIRCULAR ((uint32_t)DMA_CCR_CIRC) /*!< Circular mode */ +/** + * @} + */ + +/** @defgroup DMA_Priority_level DMA Priority level + * @{ + */ +#define DMA_PRIORITY_LOW ((uint32_t)0x00000000) /*!< Priority level : Low */ +#define DMA_PRIORITY_MEDIUM ((uint32_t)DMA_CCR_PL_0) /*!< Priority level : Medium */ +#define DMA_PRIORITY_HIGH ((uint32_t)DMA_CCR_PL_1) /*!< Priority level : High */ +#define DMA_PRIORITY_VERY_HIGH ((uint32_t)DMA_CCR_PL) /*!< Priority level : Very_High */ +/** + * @} + */ + + +/** @defgroup DMA_interrupt_enable_definitions DMA interrupt enable definitions + * @{ + */ +#define DMA_IT_TC ((uint32_t)DMA_CCR_TCIE) +#define DMA_IT_HT ((uint32_t)DMA_CCR_HTIE) +#define DMA_IT_TE ((uint32_t)DMA_CCR_TEIE) +/** + * @} + */ + +/** @defgroup DMA_flag_definitions DMA flag definitions + * @{ + */ +#define DMA_FLAG_GL1 ((uint32_t)0x00000001) +#define DMA_FLAG_TC1 ((uint32_t)0x00000002) +#define DMA_FLAG_HT1 ((uint32_t)0x00000004) +#define DMA_FLAG_TE1 ((uint32_t)0x00000008) +#define DMA_FLAG_GL2 ((uint32_t)0x00000010) +#define DMA_FLAG_TC2 ((uint32_t)0x00000020) +#define DMA_FLAG_HT2 ((uint32_t)0x00000040) +#define DMA_FLAG_TE2 ((uint32_t)0x00000080) +#define DMA_FLAG_GL3 ((uint32_t)0x00000100) +#define DMA_FLAG_TC3 ((uint32_t)0x00000200) +#define DMA_FLAG_HT3 ((uint32_t)0x00000400) +#define DMA_FLAG_TE3 ((uint32_t)0x00000800) +#define DMA_FLAG_GL4 ((uint32_t)0x00001000) +#define DMA_FLAG_TC4 ((uint32_t)0x00002000) +#define DMA_FLAG_HT4 ((uint32_t)0x00004000) +#define DMA_FLAG_TE4 ((uint32_t)0x00008000) +#define DMA_FLAG_GL5 ((uint32_t)0x00010000) +#define DMA_FLAG_TC5 ((uint32_t)0x00020000) +#define DMA_FLAG_HT5 ((uint32_t)0x00040000) +#define DMA_FLAG_TE5 ((uint32_t)0x00080000) +#define DMA_FLAG_GL6 ((uint32_t)0x00100000) +#define DMA_FLAG_TC6 ((uint32_t)0x00200000) +#define DMA_FLAG_HT6 ((uint32_t)0x00400000) +#define DMA_FLAG_TE6 ((uint32_t)0x00800000) +#define DMA_FLAG_GL7 ((uint32_t)0x01000000) +#define DMA_FLAG_TC7 ((uint32_t)0x02000000) +#define DMA_FLAG_HT7 ((uint32_t)0x04000000) +#define DMA_FLAG_TE7 ((uint32_t)0x08000000) +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup DMA_Exported_Macros DMA Exported Macros + * @{ + */ + +/** @brief Reset DMA handle state + * @param __HANDLE__: DMA handle + * @retval None + */ +#define __HAL_DMA_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DMA_STATE_RESET) + +/** + * @brief Enable the specified DMA Channel. + * @param __HANDLE__: DMA handle + * @retval None + */ +#define __HAL_DMA_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CCR |= DMA_CCR_EN) + +/** + * @brief Disable the specified DMA Channel. + * @param __HANDLE__: DMA handle + * @retval None + */ +#define __HAL_DMA_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CCR &= ~DMA_CCR_EN) + + +/* Interrupt & Flag management */ +#if defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || \ + defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || \ + defined(STM32L151xE) || defined(STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) + +/** + * @brief Return the current DMA Channel transfer complete flag. + * @param __HANDLE__: DMA handle + * @retval The specified transfer complete flag index. + */ + +#define __HAL_DMA_GET_TC_FLAG_INDEX(__HANDLE__) \ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TC1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_FLAG_TC1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TC2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_FLAG_TC2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TC3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_FLAG_TC3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TC4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_FLAG_TC4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TC5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel5))? DMA_FLAG_TC5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TC6 :\ + DMA_FLAG_TC7) + +/** + * @brief Return the current DMA Channel half transfer complete flag. + * @param __HANDLE__: DMA handle + * @retval The specified half transfer complete flag index. + */ +#define __HAL_DMA_GET_HT_FLAG_INDEX(__HANDLE__)\ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_HT1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_FLAG_HT1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_HT2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_FLAG_HT2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_HT3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_FLAG_HT3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_HT4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_FLAG_HT4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_HT5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel5))? DMA_FLAG_HT5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_HT6 :\ + DMA_FLAG_HT7) + +/** + * @brief Return the current DMA Channel transfer error flag. + * @param __HANDLE__: DMA handle + * @retval The specified transfer error flag index. + */ +#define __HAL_DMA_GET_TE_FLAG_INDEX(__HANDLE__)\ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TE1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_FLAG_TE1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TE2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_FLAG_TE2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TE3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_FLAG_TE3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TE4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_FLAG_TE4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TE5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel5))? DMA_FLAG_TE5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TE6 :\ + DMA_FLAG_TE7) + +/** + * @brief Return the current DMA Channel Global interrupt flag. + * @param __HANDLE__: DMA handle + * @retval The specified transfer error flag index. + */ +#define __HAL_DMA_GET_GI_FLAG_INDEX(__HANDLE__)\ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_ISR_GIF1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_ISR_GIF1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_ISR_GIF2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_ISR_GIF2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_ISR_GIF3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_ISR_GIF3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_ISR_GIF4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_ISR_GIF4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_ISR_GIF5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel5))? DMA_ISR_GIF5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_ISR_GIF6 :\ + DMA_ISR_GIF7) + +/** + * @brief Get the DMA Channel pending flags. + * @param __HANDLE__: DMA handle + * @param __FLAG__: Get the specified flag. + * This parameter can be any combination of the following values: + * @arg DMA_FLAG_TCx: Transfer complete flag + * @arg DMA_FLAG_HTx: Half transfer complete flag + * @arg DMA_FLAG_TEx: Transfer error flag + * @arg DMA_FLAG_GLx: Global interrupt flag + * Where x can be from 1 to 7 to select the DMA Channel x flag. + * @retval The state of FLAG (SET or RESET). + */ +#define __HAL_DMA_GET_FLAG(__HANDLE__, __FLAG__) (((uint32_t)((__HANDLE__)->Instance) > ((uint32_t)DMA1_Channel7))? \ + (DMA2->ISR & (__FLAG__)) : (DMA1->ISR & (__FLAG__))) + +/** + * @brief Clear the DMA Channel pending flags. + * @param __HANDLE__: DMA handle + * @param __FLAG__: specifies the flag to clear. + * This parameter can be any combination of the following values: + * @arg DMA_FLAG_TCx: Transfer complete flag + * @arg DMA_FLAG_HTx: Half transfer complete flag + * @arg DMA_FLAG_TEx: Transfer error flag + * @arg DMA_FLAG_GLx: Global interrupt flag + * Where x can be from 1 to 7 to select the DMA Channel x flag. + * @retval None + */ +#define __HAL_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) (((uint32_t)((__HANDLE__)->Instance) > ((uint32_t)DMA1_Channel7))? \ +(DMA2->IFCR = (__FLAG__)) : (DMA1->IFCR = (__FLAG__))) + +#else +/** + * @brief Return the current DMA Channel transfer complete flag. + * @param __HANDLE__: DMA handle + * @retval The specified transfer complete flag index. + */ + +#define __HAL_DMA_GET_TC_FLAG_INDEX(__HANDLE__) \ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TC1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TC2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TC3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TC4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TC5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TC6 :\ + DMA_FLAG_TC7) + +/** + * @brief Return the current DMA Channel half transfer complete flag. + * @param __HANDLE__: DMA handle + * @retval The specified half transfer complete flag index. + */ +#define __HAL_DMA_GET_HT_FLAG_INDEX(__HANDLE__)\ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_HT1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_HT2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_HT3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_HT4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_HT5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_HT6 :\ + DMA_FLAG_HT7) + +/** + * @brief Return the current DMA Channel transfer error flag. + * @param __HANDLE__: DMA handle + * @retval The specified transfer error flag index. + */ +#define __HAL_DMA_GET_TE_FLAG_INDEX(__HANDLE__)\ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TE1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TE2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TE3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TE4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TE5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TE6 :\ + DMA_FLAG_TE7) + +/** + * @brief Return the current DMA Channel Global interrupt flag. + * @param __HANDLE__: DMA handle + * @retval The specified transfer error flag index. + */ +#define __HAL_DMA_GET_GI_FLAG_INDEX(__HANDLE__)\ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_ISR_GIF1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_ISR_GIF2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_ISR_GIF3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_ISR_GIF4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_ISR_GIF5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_ISR_GIF6 :\ + DMA_ISR_GIF7) + +/** + * @brief Get the DMA Channel pending flags. + * @param __HANDLE__: DMA handle + * @param __FLAG__: Get the specified flag. + * This parameter can be any combination of the following values: + * @arg DMA_FLAG_TCx: Transfer complete flag + * @arg DMA_FLAG_HTx: Half transfer complete flag + * @arg DMA_FLAG_TEx: Transfer error flag + * @arg DMA_FLAG_GLx: Global interrupt flag + * Where x can be from 1 to 7 to select the DMA Channel x flag. + * @retval The state of FLAG (SET or RESET). + */ +#define __HAL_DMA_GET_FLAG(__HANDLE__, __FLAG__) (DMA1->ISR & (__FLAG__)) + +/** + * @brief Clear the DMA Channel pending flags. + * @param __HANDLE__: DMA handle + * @param __FLAG__: specifies the flag to clear. + * This parameter can be any combination of the following values: + * @arg DMA_FLAG_TCx: Transfer complete flag + * @arg DMA_FLAG_HTx: Half transfer complete flag + * @arg DMA_FLAG_TEx: Transfer error flag + * @arg DMA_FLAG_GLx: Global interrupt flag + * Where x can be from 1 to 7 to select the DMA Channel x flag. + * @retval None + */ +#define __HAL_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) (DMA1->IFCR = (__FLAG__)) + +#endif /* STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ + +/** + * @brief Enable the specified DMA Channel interrupts. + * @param __HANDLE__: DMA handle + * @param __INTERRUPT__: specifies the DMA interrupt sources to be enabled or disabled. + * This parameter can be any combination of the following values: + * @arg DMA_IT_TC: Transfer complete interrupt mask + * @arg DMA_IT_HT: Half transfer complete interrupt mask + * @arg DMA_IT_TE: Transfer error interrupt mask + * @retval None + */ +#define __HAL_DMA_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CCR |= (__INTERRUPT__)) + +/** + * @brief Disable the specified DMA Channel interrupts. + * @param __HANDLE__: DMA handle + * @param __INTERRUPT__: specifies the DMA interrupt sources to be enabled or disabled. + * This parameter can be any combination of the following values: + * @arg DMA_IT_TC: Transfer complete interrupt mask + * @arg DMA_IT_HT: Half transfer complete interrupt mask + * @arg DMA_IT_TE: Transfer error interrupt mask + * @retval None + */ +#define __HAL_DMA_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CCR &= ~(__INTERRUPT__)) + +/** + * @brief Check whether the specified DMA Channel interrupt is enabled or not. + * @param __HANDLE__: DMA handle + * @param __INTERRUPT__: specifies the DMA interrupt source to check. + * This parameter can be one of the following values: + * @arg DMA_IT_TC: Transfer complete interrupt mask + * @arg DMA_IT_HT: Half transfer complete interrupt mask + * @arg DMA_IT_TE: Transfer error interrupt mask + * @retval The state of DMA_IT (SET or RESET). + */ +#define __HAL_DMA_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CCR & (__INTERRUPT__))) + +/** + * @brief Return the number of remaining data units in the current DMA Channel transfer. + * @param __HANDLE__: DMA handle + * @retval The number of remaining data units in the current DMA Channel transfer. + */ +#define __HAL_DMA_GET_COUNTER(__HANDLE__) ((__HANDLE__)->Instance->CNDTR) + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup DMA_Exported_Functions + * @{ + */ + +/** @addtogroup DMA_Exported_Functions_Group1 + * @{ + */ +/* Initialization and de-initialization functions *****************************/ +HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma); +HAL_StatusTypeDef HAL_DMA_DeInit (DMA_HandleTypeDef *hdma); +/** + * @} + */ + +/** @addtogroup DMA_Exported_Functions_Group2 + * @{ + */ +/* IO operation functions *****************************************************/ +HAL_StatusTypeDef HAL_DMA_Start (DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength); +HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength); +HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma); +HAL_StatusTypeDef HAL_DMA_Abort_IT(DMA_HandleTypeDef *hdma); +HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, uint32_t CompleteLevel, uint32_t Timeout); +void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma); +HAL_StatusTypeDef HAL_DMA_RegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID, void (* pCallback)( DMA_HandleTypeDef * _hdma)); +HAL_StatusTypeDef HAL_DMA_UnRegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID); + +/** + * @} + */ + +/** @addtogroup DMA_Exported_Functions_Group3 + * @{ + */ +/* Peripheral State and Error functions ***************************************/ +HAL_DMA_StateTypeDef HAL_DMA_GetState(DMA_HandleTypeDef *hdma); +uint32_t HAL_DMA_GetError(DMA_HandleTypeDef *hdma); +/** + * @} + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup DMA_Private_Macros DMA Private Macros + * @{ + */ + +#define IS_DMA_DIRECTION(DIRECTION) (((DIRECTION) == DMA_PERIPH_TO_MEMORY ) || \ + ((DIRECTION) == DMA_MEMORY_TO_PERIPH) || \ + ((DIRECTION) == DMA_MEMORY_TO_MEMORY)) + +#define IS_DMA_BUFFER_SIZE(SIZE) (((SIZE) >= 0x1) && ((SIZE) < 0x10000)) + +#define IS_DMA_PERIPHERAL_INC_STATE(STATE) (((STATE) == DMA_PINC_ENABLE) || \ + ((STATE) == DMA_PINC_DISABLE)) + +#define IS_DMA_MEMORY_INC_STATE(STATE) (((STATE) == DMA_MINC_ENABLE) || \ + ((STATE) == DMA_MINC_DISABLE)) + +#define IS_DMA_ALL_REQUEST(REQUEST) (((REQUEST) == DMA_REQUEST_0) || \ + ((REQUEST) == DMA_REQUEST_1) || \ + ((REQUEST) == DMA_REQUEST_2) || \ + ((REQUEST) == DMA_REQUEST_3) || \ + ((REQUEST) == DMA_REQUEST_4) || \ + ((REQUEST) == DMA_REQUEST_5) || \ + ((REQUEST) == DMA_REQUEST_6) || \ + ((REQUEST) == DMA_REQUEST_7)) +#define IS_DMA_PERIPHERAL_DATA_SIZE(SIZE) (((SIZE) == DMA_PDATAALIGN_BYTE) || \ + ((SIZE) == DMA_PDATAALIGN_HALFWORD) || \ + ((SIZE) == DMA_PDATAALIGN_WORD)) + +#define IS_DMA_MEMORY_DATA_SIZE(SIZE) (((SIZE) == DMA_MDATAALIGN_BYTE) || \ + ((SIZE) == DMA_MDATAALIGN_HALFWORD) || \ + ((SIZE) == DMA_MDATAALIGN_WORD )) + +#define IS_DMA_MODE(MODE) (((MODE) == DMA_NORMAL ) || \ + ((MODE) == DMA_CIRCULAR)) + +#define IS_DMA_PRIORITY(PRIORITY) (((PRIORITY) == DMA_PRIORITY_LOW ) || \ + ((PRIORITY) == DMA_PRIORITY_MEDIUM) || \ + ((PRIORITY) == DMA_PRIORITY_HIGH) || \ + ((PRIORITY) == DMA_PRIORITY_VERY_HIGH)) + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32L1xx_HAL_DMA_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_dma_ex.h b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_dma_ex.h new file mode 100755 index 0000000..9b1fa7f --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_dma_ex.h @@ -0,0 +1,244 @@ +/** + ****************************************************************************** + * @file stm32l1xx_hal_dma_ex.h + * @author MCD Application Team + * @version V1.1.3 + * @date 04-March-2016 + * @brief Header file of DMA HAL extension module. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L1xx_HAL_DMA_EX_H +#define __STM32L1xx_HAL_DMA_EX_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_hal_def.h" + +/** @addtogroup STM32L1xx_HAL_Driver + * @{ + */ + +/** @defgroup DMAEx DMAEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup DMAEx_Exported_Macros DMA Extended Exported Macros + * @{ + */ +/* Interrupt & Flag management */ +#if defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || \ + defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || \ + defined(STM32L151xE) || defined(STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) +/** + * @brief Returns the current DMA Channel transfer complete flag. + * @param __HANDLE__: DMA handle + * @retval The specified transfer complete flag index. + */ +#define __HAL_DMA_GET_TC_FLAG_INDEX(__HANDLE__) \ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TC1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TC2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TC3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TC4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TC5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TC6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel7))? DMA_FLAG_TC7 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_FLAG_TC1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_FLAG_TC2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_FLAG_TC3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_FLAG_TC4 :\ + DMA_FLAG_TC5) + +/** + * @brief Returns the current DMA Channel half transfer complete flag. + * @param __HANDLE__: DMA handle + * @retval The specified half transfer complete flag index. + */ +#define __HAL_DMA_GET_HT_FLAG_INDEX(__HANDLE__)\ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_HT1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_HT2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_HT3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_HT4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_HT5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_HT6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel7))? DMA_FLAG_HT7 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_FLAG_HT1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_FLAG_HT2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_FLAG_HT3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_FLAG_HT4 :\ + DMA_FLAG_HT5) + +/** + * @brief Returns the current DMA Channel transfer error flag. + * @param __HANDLE__: DMA handle + * @retval The specified transfer error flag index. + */ +#define __HAL_DMA_GET_TE_FLAG_INDEX(__HANDLE__)\ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TE1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TE2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TE3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TE4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TE5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TE6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel7))? DMA_FLAG_TE7 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_FLAG_TE1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_FLAG_TE2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_FLAG_TE3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_FLAG_TE4 :\ + DMA_FLAG_TE5) + +/** + * @brief Get the DMA Channel pending flags. + * @param __HANDLE__: DMA handle + * @param __FLAG__: Get the specified flag. + * This parameter can be any combination of the following values: + * @arg DMA_FLAG_TCx: Transfer complete flag + * @arg DMA_FLAG_HTx: Half transfer complete flag + * @arg DMA_FLAG_TEx: Transfer error flag + * Where x can be 1_7 or 1_5 to select the DMA Channel flag. + * @retval The state of FLAG (SET or RESET). + */ +#define __HAL_DMA_GET_FLAG(__HANDLE__, __FLAG__)\ +(((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Channel7)? (DMA2->ISR & (__FLAG__)) :\ + (DMA1->ISR & (__FLAG__))) + +/** + * @brief Clears the DMA Channel pending flags. + * @param __HANDLE__: DMA handle + * @param __FLAG__: specifies the flag to clear. + * This parameter can be any combination of the following values: + * @arg DMA_FLAG_TCx: Transfer complete flag + * @arg DMA_FLAG_HTx: Half transfer complete flag + * @arg DMA_FLAG_TEx: Transfer error flag + * Where x can be 1_7 or 1_5 to select the DMA Channel flag. + * @retval None + */ +#define __HAL_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) \ +(((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Channel7)? (DMA2->IFCR = (__FLAG__)) :\ + (DMA1->IFCR = (__FLAG__))) + +#else +/** + * @brief Returns the current DMA Channel transfer complete flag. + * @param __HANDLE__: DMA handle + * @retval The specified transfer complete flag index. + */ +#define __HAL_DMA_GET_TC_FLAG_INDEX(__HANDLE__) \ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TC1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TC2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TC3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TC4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TC5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TC6 :\ + DMA_FLAG_TC7) + +/** + * @brief Returns the current DMA Channel half transfer complete flag. + * @param __HANDLE__: DMA handle + * @retval The specified half transfer complete flag index. + */ +#define __HAL_DMA_GET_HT_FLAG_INDEX(__HANDLE__)\ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_HT1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_HT2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_HT3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_HT4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_HT5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_HT6 :\ + DMA_FLAG_HT7) + +/** + * @brief Returns the current DMA Channel transfer error flag. + * @param __HANDLE__: DMA handle + * @retval The specified transfer error flag index. + */ +#define __HAL_DMA_GET_TE_FLAG_INDEX(__HANDLE__)\ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TE1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TE2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TE3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TE4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TE5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TE6 :\ + DMA_FLAG_TE7) + +/** + * @brief Get the DMA Channel pending flags. + * @param __HANDLE__: DMA handle + * @param __FLAG__: Get the specified flag. + * This parameter can be any combination of the following values: + * @arg DMA_FLAG_TCx: Transfer complete flag + * @arg DMA_FLAG_HTx: Half transfer complete flag + * @arg DMA_FLAG_TEx: Transfer error flag + * Where x can be 1_7 to select the DMA Channel flag. + * @retval The state of FLAG (SET or RESET). + */ + +#define __HAL_DMA_GET_FLAG(__HANDLE__, __FLAG__) (DMA1->ISR & (__FLAG__)) + +/** + * @brief Clears the DMA Channel pending flags. + * @param __HANDLE__: DMA handle + * @param __FLAG__: specifies the flag to clear. + * This parameter can be any combination of the following values: + * @arg DMA_FLAG_TCx: Transfer complete flag + * @arg DMA_FLAG_HTx: Half transfer complete flag + * @arg DMA_FLAG_TEx: Transfer error flag + * Where x can be 1_7 to select the DMA Channel flag. + * @retval None + */ +#define __HAL_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) (DMA1->IFCR = (__FLAG__)) + +#endif /* STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ +/** + * @} + */ + + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32L1xx_HAL_DMA_EX_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_flash.h b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_flash.h new file mode 100755 index 0000000..81ff536 --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_flash.h @@ -0,0 +1,429 @@ +/** + ****************************************************************************** + * @file stm32l1xx_hal_flash.h + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief Header file of Flash HAL module. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L1xx_HAL_FLASH_H +#define __STM32L1xx_HAL_FLASH_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_hal_def.h" + +/** @addtogroup STM32L1xx_HAL_Driver + * @{ + */ + +/** @addtogroup FLASH + * @{ + */ + +/** @addtogroup FLASH_Private_Constants + * @{ + */ +#define FLASH_TIMEOUT_VALUE ((uint32_t)50000U) /* 50 s */ +/** + * @} + */ + +/** @addtogroup FLASH_Private_Macros + * @{ + */ + +#define IS_FLASH_TYPEPROGRAM(_VALUE_) (((_VALUE_) == FLASH_TYPEPROGRAM_WORD)) + +#define IS_FLASH_LATENCY(__LATENCY__) (((__LATENCY__) == FLASH_LATENCY_0) || \ + ((__LATENCY__) == FLASH_LATENCY_1)) + +/** + * @} + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup FLASH_Exported_Types FLASH Exported Types + * @{ + */ + +/** + * @brief FLASH Procedure structure definition + */ +typedef enum +{ + FLASH_PROC_NONE = 0, + FLASH_PROC_PAGEERASE = 1, + FLASH_PROC_PROGRAM = 2, +} FLASH_ProcedureTypeDef; + +/** + * @brief FLASH handle Structure definition + */ +typedef struct +{ + __IO FLASH_ProcedureTypeDef ProcedureOnGoing; /*!< Internal variable to indicate which procedure is ongoing or not in IT context */ + + __IO uint32_t NbPagesToErase; /*!< Internal variable to save the remaining sectors to erase in IT context*/ + + __IO uint32_t Address; /*!< Internal variable to save address selected for program or erase */ + + __IO uint32_t Page; /*!< Internal variable to define the current page which is erasing */ + + HAL_LockTypeDef Lock; /*!< FLASH locking object */ + + __IO uint32_t ErrorCode; /*!< FLASH error code + This parameter can be a value of @ref FLASH_Error_Codes */ +} FLASH_ProcessTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup FLASH_Exported_Constants FLASH Exported Constants + * @{ + */ + +/** @defgroup FLASH_Error_Codes FLASH Error Codes + * @{ + */ + +#define HAL_FLASH_ERROR_NONE 0x00U /*!< No error */ +#define HAL_FLASH_ERROR_PGA 0x01U /*!< Programming alignment error */ +#define HAL_FLASH_ERROR_WRP 0x02U /*!< Write protection error */ +#define HAL_FLASH_ERROR_OPTV 0x04U /*!< Option validity error */ +#define HAL_FLASH_ERROR_SIZE 0x08U /*!< */ +#define HAL_FLASH_ERROR_RD 0x10U /*!< Read protected error */ +#define HAL_FLASH_ERROR_OPTVUSR 0x20U /*!< Option UserValidity Error. */ +#define HAL_FLASH_ERROR_OPERATION 0x40U /*!< Not used */ + +/** + * @} + */ + +/** @defgroup FLASH_Page_Size FLASH size information + * @{ + */ + +#define FLASH_SIZE (uint32_t)(*((uint16_t *)FLASHSIZE_BASE) * 1024U) +#define FLASH_PAGE_SIZE ((uint32_t)256U) /*!< FLASH Page Size in bytes */ + +/** + * @} + */ + +/** @defgroup FLASH_Type_Program FLASH Type Program + * @{ + */ +#define FLASH_TYPEPROGRAM_WORD ((uint32_t)0x02U) /*!PECR), (__INTERRUPT__)) + +/** + * @brief Disable the specified FLASH interrupt. + * @param __INTERRUPT__ FLASH interrupt + * This parameter can be any combination of the following values: + * @arg @ref FLASH_IT_EOP End of FLASH Operation Interrupt + * @arg @ref FLASH_IT_ERR Error Interrupt + * @retval none + */ +#define __HAL_FLASH_DISABLE_IT(__INTERRUPT__) CLEAR_BIT((FLASH->PECR), (uint32_t)(__INTERRUPT__)) + +/** + * @brief Get the specified FLASH flag status. + * @param __FLAG__ specifies the FLASH flag to check. + * This parameter can be one of the following values: + * @arg @ref FLASH_FLAG_BSY FLASH Busy flag + * @arg @ref FLASH_FLAG_EOP FLASH End of Operation flag + * @arg @ref FLASH_FLAG_ENDHV FLASH End of High Voltage flag + * @arg @ref FLASH_FLAG_READY FLASH Ready flag after low power mode + * @arg @ref FLASH_FLAG_PGAERR FLASH Programming Alignment error flag + * @arg @ref FLASH_FLAG_SIZERR FLASH Size error flag + * @arg @ref FLASH_FLAG_OPTVERR FLASH Option validity error error flag +@if STM32L100xB +@elif STM32L100xBA + * @arg @ref FLASH_FLAG_RDERR FLASH Read Protection error flag (PCROP) +@elif STM32L151xB +@elif STM32L151xBA + * @arg @ref FLASH_FLAG_RDERR FLASH Read Protection error flag (PCROP) +@elif STM32L152xB +@elif STM32L152xBA + * @arg @ref FLASH_FLAG_RDERR FLASH Read Protection error flag (PCROP) +@elif STM32L100xC + * @arg @ref FLASH_FLAG_RDERR FLASH Read Protection error flag (PCROP) + * @arg @ref FLASH_FLAG_OPTVERRUSR FLASH Option User validity error +@elif STM32L151xC + * @arg @ref FLASH_FLAG_RDERR FLASH Read Protection error flag (PCROP) + * @arg @ref FLASH_FLAG_OPTVERRUSR FLASH Option User validity error +@elif STM32L152xC + * @arg @ref FLASH_FLAG_RDERR FLASH Read Protection error flag (PCROP) + * @arg @ref FLASH_FLAG_OPTVERRUSR FLASH Option User validity error +@elif STM32L162xC + * @arg @ref FLASH_FLAG_RDERR FLASH Read Protection error flag (PCROP) + * @arg @ref FLASH_FLAG_OPTVERRUSR FLASH Option User validity error +@else + * @arg @ref FLASH_FLAG_OPTVERRUSR FLASH Option User validity error +@endif + * @arg @ref FLASH_FLAG_WRPERR FLASH Write protected error flag + * @retval The new state of __FLAG__ (SET or RESET). + */ +#define __HAL_FLASH_GET_FLAG(__FLAG__) (((FLASH->SR) & (__FLAG__)) == (__FLAG__)) + +/** + * @brief Clear the specified FLASH flag. + * @param __FLAG__ specifies the FLASH flags to clear. + * This parameter can be any combination of the following values: + * @arg @ref FLASH_FLAG_EOP FLASH End of Operation flag + * @arg @ref FLASH_FLAG_ENDHV FLASH End of High Voltage flag + * @arg @ref FLASH_FLAG_READY FLASH Ready flag after low power mode + * @arg @ref FLASH_FLAG_PGAERR FLASH Programming Alignment error flag + * @arg @ref FLASH_FLAG_SIZERR FLASH Size error flag + * @arg @ref FLASH_FLAG_OPTVERR FLASH Option validity error error flag +@if STM32L100xB +@elif STM32L100xBA + * @arg @ref FLASH_FLAG_RDERR FLASH Read Protection error flag (PCROP) +@elif STM32L151xB +@elif STM32L151xBA + * @arg @ref FLASH_FLAG_RDERR FLASH Read Protection error flag (PCROP) +@elif STM32L152xB +@elif STM32L152xBA + * @arg @ref FLASH_FLAG_RDERR FLASH Read Protection error flag (PCROP) +@elif STM32L100xC + * @arg @ref FLASH_FLAG_RDERR FLASH Read Protection error flag (PCROP) + * @arg @ref FLASH_FLAG_OPTVERRUSR FLASH Option User validity error +@elif STM32L151xC + * @arg @ref FLASH_FLAG_RDERR FLASH Read Protection error flag (PCROP) + * @arg @ref FLASH_FLAG_OPTVERRUSR FLASH Option User validity error +@elif STM32L152xC + * @arg @ref FLASH_FLAG_RDERR FLASH Read Protection error flag (PCROP) + * @arg @ref FLASH_FLAG_OPTVERRUSR FLASH Option User validity error +@elif STM32L162xC + * @arg @ref FLASH_FLAG_RDERR FLASH Read Protection error flag (PCROP) + * @arg @ref FLASH_FLAG_OPTVERRUSR FLASH Option User validity error +@else + * @arg @ref FLASH_FLAG_OPTVERRUSR FLASH Option User validity error +@endif + * @arg @ref FLASH_FLAG_WRPERR FLASH Write protected error flag + * @retval none + */ +#define __HAL_FLASH_CLEAR_FLAG(__FLAG__) ((FLASH->SR) = (__FLAG__)) + +/** + * @} + */ + +/** + * @} + */ + +/* Include FLASH HAL Extended module */ +#include "stm32l1xx_hal_flash_ex.h" +#include "stm32l1xx_hal_flash_ramfunc.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup FLASH_Exported_Functions + * @{ + */ + +/** @addtogroup FLASH_Exported_Functions_Group1 + * @{ + */ +/* IO operation functions *****************************************************/ +HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint32_t Data); +HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint32_t Data); + +/* FLASH IRQ handler function */ +void HAL_FLASH_IRQHandler(void); +/* Callbacks in non blocking modes */ +void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue); +void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue); + +/** + * @} + */ + +/** @addtogroup FLASH_Exported_Functions_Group2 + * @{ + */ +/* Peripheral Control functions ***********************************************/ +HAL_StatusTypeDef HAL_FLASH_Unlock(void); +HAL_StatusTypeDef HAL_FLASH_Lock(void); +HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void); +HAL_StatusTypeDef HAL_FLASH_OB_Lock(void); +HAL_StatusTypeDef HAL_FLASH_OB_Launch(void); + +/** + * @} + */ + +/** @addtogroup FLASH_Exported_Functions_Group3 + * @{ + */ +/* Peripheral State and Error functions ***************************************/ +uint32_t HAL_FLASH_GetError(void); + +/** + * @} + */ + +/** + * @} + */ + +/* Private function -------------------------------------------------*/ +/** @addtogroup FLASH_Private_Functions + * @{ + */ +HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32L1xx_HAL_FLASH_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_flash_ex.h b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_flash_ex.h new file mode 100755 index 0000000..59470e9 --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_flash_ex.h @@ -0,0 +1,986 @@ +/** + ****************************************************************************** + * @file stm32l1xx_hal_flash.h + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief Header file of Flash HAL module. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L1xx_HAL_FLASH_EX_H +#define __STM32L1xx_HAL_FLASH_EX_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_hal_def.h" + +/** @addtogroup STM32L1xx_HAL_Driver + * @{ + */ + +/** @addtogroup FLASHEx + * @{ + */ + +/** @addtogroup FLASHEx_Private_Constants + * @{ + */ +#if defined(FLASH_SR_RDERR) && defined(FLASH_SR_OPTVERRUSR) + +#define FLASH_FLAG_MASK ( FLASH_FLAG_EOP | FLASH_FLAG_ENDHV | FLASH_FLAG_WRPERR | \ + FLASH_FLAG_OPTVERR | FLASH_FLAG_PGAERR | FLASH_FLAG_SIZERR | \ + FLASH_FLAG_OPTVERRUSR | FLASH_FLAG_RDERR) + +#elif defined(FLASH_SR_RDERR) + +#define FLASH_FLAG_MASK ( FLASH_FLAG_EOP | FLASH_FLAG_ENDHV | FLASH_FLAG_WRPERR | \ + FLASH_FLAG_OPTVERR | FLASH_FLAG_PGAERR | FLASH_FLAG_SIZERR | \ + FLASH_FLAG_RDERR) + +#elif defined(FLASH_SR_OPTVERRUSR) + +#define FLASH_FLAG_MASK ( FLASH_FLAG_EOP | FLASH_FLAG_ENDHV | FLASH_FLAG_WRPERR | \ + FLASH_FLAG_OPTVERR | FLASH_FLAG_PGAERR | FLASH_FLAG_SIZERR | \ + FLASH_FLAG_OPTVERRUSR) + +#else + +#define FLASH_FLAG_MASK ( FLASH_FLAG_EOP | FLASH_FLAG_ENDHV | FLASH_FLAG_WRPERR | \ + FLASH_FLAG_OPTVERR | FLASH_FLAG_PGAERR | FLASH_FLAG_SIZERR) + +#endif /* FLASH_SR_RDERR & FLASH_SR_OPTVERRUSR */ + +#if defined(STM32L100xB) || defined(STM32L151xB) || defined(STM32L152xB) || defined(STM32L100xBA) \ + || defined(STM32L151xBA) || defined(STM32L152xBA) + +/******* Devices with FLASH 128K *******/ +#define FLASH_NBPAGES_MAX 512 /* 512 pages from page 0 to page 511 */ + +#elif defined(STM32L100xC) || defined(STM32L151xC) || defined(STM32L152xC) || defined(STM32L162xC) \ + || defined(STM32L151xCA) || defined(STM32L152xCA) || defined(STM32L162xCA) + +/******* Devices with FLASH 256K *******/ +#define FLASH_NBPAGES_MAX 1025 /* 1025 pages from page 0 to page 1024 */ + +#elif defined(STM32L151xD) || defined(STM32L151xDX) || defined(STM32L152xD) || defined(STM32L152xDX) \ + || defined(STM32L162xD) || defined(STM32L162xDX) + +/******* Devices with FLASH 384K *******/ +#define FLASH_NBPAGES_MAX 1536 /* 1536 pages from page 0 to page 1535 */ + +#elif defined(STM32L151xE) || defined(STM32L152xE) || defined(STM32L162xE) + +/******* Devices with FLASH 512K *******/ +#define FLASH_NBPAGES_MAX 2048 /* 2048 pages from page 0 to page 2047 */ + +#endif /* STM32L100xB || STM32L151xB || STM32L152xB || STM32L100xBA || STM32L151xBA || STM32L152xBA */ + +#define WRP_MASK_LOW ((uint32_t)0x0000FFFFU) +#define WRP_MASK_HIGH ((uint32_t)0xFFFF0000U) + +/** + * @} + */ + +/** @addtogroup FLASHEx_Private_Macros + * @{ + */ + +#define IS_FLASH_TYPEERASE(__VALUE__) (((__VALUE__) == FLASH_TYPEERASE_PAGES)) + +#define IS_OPTIONBYTE(__VALUE__) (((__VALUE__) <= (OPTIONBYTE_WRP|OPTIONBYTE_RDP|OPTIONBYTE_USER|OPTIONBYTE_BOR))) + +#define IS_WRPSTATE(__VALUE__) (((__VALUE__) == OB_WRPSTATE_DISABLE) || \ + ((__VALUE__) == OB_WRPSTATE_ENABLE)) + +#define IS_OB_WRP(__PAGE__) (((__PAGE__) != 0x0000000U)) + +#define IS_OB_RDP(__LEVEL__) (((__LEVEL__) == OB_RDP_LEVEL_0) ||\ + ((__LEVEL__) == OB_RDP_LEVEL_1) ||\ + ((__LEVEL__) == OB_RDP_LEVEL_2)) + +#define IS_OB_BOR_LEVEL(__LEVEL__) (((__LEVEL__) == OB_BOR_OFF) || \ + ((__LEVEL__) == OB_BOR_LEVEL1) || \ + ((__LEVEL__) == OB_BOR_LEVEL2) || \ + ((__LEVEL__) == OB_BOR_LEVEL3) || \ + ((__LEVEL__) == OB_BOR_LEVEL4) || \ + ((__LEVEL__) == OB_BOR_LEVEL5)) + +#define IS_OB_IWDG_SOURCE(__SOURCE__) (((__SOURCE__) == OB_IWDG_SW) || ((__SOURCE__) == OB_IWDG_HW)) + +#define IS_OB_STOP_SOURCE(__SOURCE__) (((__SOURCE__) == OB_STOP_NORST) || ((__SOURCE__) == OB_STOP_RST)) + +#define IS_OB_STDBY_SOURCE(__SOURCE__) (((__SOURCE__) == OB_STDBY_NORST) || ((__SOURCE__) == OB_STDBY_RST)) + +#if defined(FLASH_OBR_SPRMOD) && defined(FLASH_OBR_nRST_BFB2) + +#define IS_OBEX(__VALUE__) (((__VALUE__) == OPTIONBYTE_PCROP) || ((__VALUE__) == OPTIONBYTE_BOOTCONFIG)) + +#elif defined(FLASH_OBR_SPRMOD) && !defined(FLASH_OBR_nRST_BFB2) + +#define IS_OBEX(__VALUE__) ((__VALUE__) == OPTIONBYTE_PCROP) + +#elif !defined(FLASH_OBR_SPRMOD) && defined(FLASH_OBR_nRST_BFB2) + +#define IS_OBEX(__VALUE__) ((__VALUE__) == OPTIONBYTE_BOOTCONFIG) + +#endif /* FLASH_OBR_SPRMOD && FLASH_OBR_nRST_BFB2 */ + +#if defined(FLASH_OBR_SPRMOD) + +#define IS_PCROPSTATE(__VALUE__) (((__VALUE__) == OB_PCROP_STATE_DISABLE) || \ + ((__VALUE__) == OB_PCROP_STATE_ENABLE)) + +#define IS_OB_PCROP(__PAGE__) (((__PAGE__) != 0x0000000U)) +#endif /* FLASH_OBR_SPRMOD */ + +#if defined(FLASH_OBR_nRST_BFB2) + +#define IS_OB_BOOT_BANK(__BANK__) (((__BANK__) == OB_BOOT_BANK2) || ((__BANK__) == OB_BOOT_BANK1)) + +#endif /* FLASH_OBR_nRST_BFB2 */ + +#define IS_TYPEERASEDATA(__VALUE__) (((__VALUE__) == FLASH_TYPEERASEDATA_BYTE) || \ + ((__VALUE__) == FLASH_TYPEERASEDATA_HALFWORD) || \ + ((__VALUE__) == FLASH_TYPEERASEDATA_WORD)) + +#define IS_TYPEPROGRAMDATA(__VALUE__) (((__VALUE__) == FLASH_TYPEPROGRAMDATA_BYTE) || \ + ((__VALUE__) == FLASH_TYPEPROGRAMDATA_HALFWORD) || \ + ((__VALUE__) == FLASH_TYPEPROGRAMDATA_WORD) || \ + ((__VALUE__) == FLASH_TYPEPROGRAMDATA_FASTBYTE) || \ + ((__VALUE__) == FLASH_TYPEPROGRAMDATA_FASTHALFWORD) || \ + ((__VALUE__) == FLASH_TYPEPROGRAMDATA_FASTWORD)) + +/** @defgroup FLASHEx_Address FLASHEx Address + * @{ + */ + +#define IS_FLASH_DATA_ADDRESS(__ADDRESS__) (((__ADDRESS__) >= FLASH_EEPROM_BASE) && ((__ADDRESS__) <= FLASH_EEPROM_END)) + +#if defined(STM32L100xB) || defined(STM32L151xB) || defined(STM32L152xB) || defined(STM32L100xBA) \ + || defined(STM32L151xBA) || defined(STM32L152xBA) || defined(STM32L100xC) || defined(STM32L151xC) \ + || defined(STM32L152xC) || defined(STM32L162xC) || defined(STM32L151xCA) || defined(STM32L152xCA) \ + || defined(STM32L162xCA) + +#define IS_FLASH_PROGRAM_ADDRESS(__ADDRESS__) (((__ADDRESS__) >= FLASH_BASE) && ((__ADDRESS__) <= FLASH_END)) + +#else /*STM32L151xD || STM32L152xD || STM32L162xD || STM32L151xE || STM32L152xE || STM32L162xE */ + +#define IS_FLASH_PROGRAM_ADDRESS(__ADDRESS__) (((__ADDRESS__) >= FLASH_BASE) && ((__ADDRESS__) <= FLASH_BANK2_END)) +#define IS_FLASH_PROGRAM_BANK1_ADDRESS(__ADDRESS__) (((__ADDRESS__) >= FLASH_BASE) && ((__ADDRESS__) <= FLASH_BANK1_END)) +#define IS_FLASH_PROGRAM_BANK2_ADDRESS(__ADDRESS__) (((__ADDRESS__) >= FLASH_BANK2_BASE) && ((__ADDRESS__) <= FLASH_BANK2_END)) + +#endif /* STM32L100xB || STM32L151xB || STM32L152xB || (...) || STM32L151xCA || STM32L152xCA || STM32L162xCA */ + +#define IS_NBPAGES(__PAGES__) (((__PAGES__) >= 1) && ((__PAGES__) <= FLASH_NBPAGES_MAX)) + +/** + * @} + */ + +/** + * @} + */ +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup FLASHEx_Exported_Types FLASHEx Exported Types + * @{ + */ + +/** + * @brief FLASH Erase structure definition + */ +typedef struct +{ + uint32_t TypeErase; /*!< TypeErase: Page Erase only. + This parameter can be a value of @ref FLASHEx_Type_Erase */ + + uint32_t PageAddress; /*!< PageAddress: Initial FLASH address to be erased + This parameter must be a value belonging to FLASH Programm address (depending on the devices) */ + + uint32_t NbPages; /*!< NbPages: Number of pages to be erased. + This parameter must be a value between 1 and (max number of pages - value of Initial page)*/ + +} FLASH_EraseInitTypeDef; + +/** + * @brief FLASH Option Bytes PROGRAM structure definition + */ +typedef struct +{ + uint32_t OptionType; /*!< OptionType: Option byte to be configured. + This parameter can be a value of @ref FLASHEx_Option_Type */ + + uint32_t WRPState; /*!< WRPState: Write protection activation or deactivation. + This parameter can be a value of @ref FLASHEx_WRP_State */ + + uint32_t WRPSector0To31; /*!< WRPSector0To31: specifies the sector(s) which are write protected between Sector 0 to 31 + This parameter can be a combination of @ref FLASHEx_Option_Bytes_Write_Protection1 */ + +#if defined(STM32L100xC) || defined(STM32L151xC) || defined(STM32L152xC) || defined(STM32L162xC) \ + || defined(STM32L151xCA) || defined(STM32L151xD) || defined(STM32L151xDX) || defined(STM32L152xCA) \ + || defined(STM32L152xD) || defined(STM32L152xDX) || defined(STM32L162xCA) || defined(STM32L162xD) \ + || defined(STM32L162xDX) || defined(STM32L151xE) || defined(STM32L152xE) || defined(STM32L162xE) + uint32_t WRPSector32To63; /*!< WRPSector32To63: specifies the sector(s) which are write protected between Sector 32 to 63 + This parameter can be a combination of @ref FLASHEx_Option_Bytes_Write_Protection2 */ +#endif /* STM32L100xC || STM32L151xC || STM32L152xC || (...) || STM32L151xE || STM32L152xE || STM32L162xE */ + +#if defined(STM32L151xD) || defined(STM32L151xDX) || defined(STM32L152xD) || defined(STM32L152xDX) \ + || defined(STM32L162xD) || defined(STM32L162xDX) || defined(STM32L151xE) || defined(STM32L152xE) \ + || defined(STM32L162xE) + uint32_t WRPSector64To95; /*!< WRPSector64to95: specifies the sector(s) which are write protected between Sector 64 to 95 + This parameter can be a combination of @ref FLASHEx_Option_Bytes_Write_Protection3 */ +#endif /* STM32L151xD || STM32L152xD || STM32L162xD || STM32L151xE || STM32L152xE || STM32L162xE */ + +#if defined(STM32L151xE) || defined(STM32L152xE) || defined(STM32L162xE) || defined(STM32L151xDX) \ + || defined(STM32L152xDX) || defined(STM32L162xDX) + uint32_t WRPSector96To127; /*!< WRPSector96To127: specifies the sector(s) which are write protected between Sector 96 to 127 or + Sectors 96 to 111 for STM32L1xxxDX devices. + This parameter can be a combination of @ref FLASHEx_Option_Bytes_Write_Protection4 */ +#endif /* STM32L151xE || STM32L152xE || STM32L162xE || STM32L151xDX || ... */ + + uint8_t RDPLevel; /*!< RDPLevel: Set the read protection level. + This parameter can be a value of @ref FLASHEx_Option_Bytes_Read_Protection */ + + uint8_t BORLevel; /*!< BORLevel: Set the BOR Level. + This parameter can be a value of @ref FLASHEx_Option_Bytes_BOR_Level */ + + uint8_t USERConfig; /*!< USERConfig: Program the FLASH User Option Byte: IWDG_SW / RST_STOP / RST_STDBY. + This parameter can be a combination of @ref FLASHEx_Option_Bytes_IWatchdog, + @ref FLASHEx_Option_Bytes_nRST_STOP and @ref FLASHEx_Option_Bytes_nRST_STDBY*/ +} FLASH_OBProgramInitTypeDef; + +#if defined(FLASH_OBR_SPRMOD) || defined(FLASH_OBR_nRST_BFB2) +/** + * @brief FLASH Advanced Option Bytes Program structure definition + */ +typedef struct +{ + uint32_t OptionType; /*!< OptionType: Option byte to be configured for extension . + This parameter can be a value of @ref FLASHEx_OptionAdv_Type */ + +#if defined(FLASH_OBR_SPRMOD) + uint32_t PCROPState; /*!< PCROPState: PCROP activation or deactivation. + This parameter can be a value of @ref FLASHEx_PCROP_State */ + + uint32_t PCROPSector0To31; /*!< PCROPSector0To31: specifies the sector(s) set for PCROP + This parameter can be a value of @ref FLASHEx_Option_Bytes_PC_ReadWrite_Protection1 */ + +#if defined(STM32L151xC) || defined(STM32L152xC) || defined(STM32L162xC) + uint32_t PCROPSector32To63; /*!< PCROPSector32To63: specifies the sector(s) set for PCROP + This parameter can be a value of @ref FLASHEx_Option_Bytes_PC_ReadWrite_Protection2 */ +#endif /* STM32L151xC || STM32L152xC || STM32L162xC */ +#endif /* FLASH_OBR_SPRMOD */ + +#if defined(FLASH_OBR_nRST_BFB2) + uint16_t BootConfig; /*!< BootConfig: specifies Option bytes for boot config + This parameter can be a value of @ref FLASHEx_Option_Bytes_BOOT */ +#endif /* FLASH_OBR_nRST_BFB2*/ +} FLASH_AdvOBProgramInitTypeDef; + +/** + * @} + */ +#endif /* FLASH_OBR_SPRMOD || FLASH_OBR_nRST_BFB2 */ + +/* Exported constants --------------------------------------------------------*/ + + +/** @defgroup FLASHEx_Exported_Constants FLASHEx Exported Constants + * @{ + */ + +/** @defgroup FLASHEx_Type_Erase FLASHEx_Type_Erase + * @{ + */ +#define FLASH_TYPEERASE_PAGES ((uint32_t)0x00U) /*!= 256KB*/ +#define OB_WRP3_PAGES1024TO1039 ((uint32_t)0x00000001) /* Write protection of Sector64 */ +#define OB_WRP3_PAGES1040TO1055 ((uint32_t)0x00000002) /* Write protection of Sector65 */ +#define OB_WRP3_PAGES1056TO1071 ((uint32_t)0x00000004) /* Write protection of Sector66 */ +#define OB_WRP3_PAGES1072TO1087 ((uint32_t)0x00000008) /* Write protection of Sector67 */ +#define OB_WRP3_PAGES1088TO1103 ((uint32_t)0x00000010) /* Write protection of Sector68 */ +#define OB_WRP3_PAGES1104TO1119 ((uint32_t)0x00000020) /* Write protection of Sector69 */ +#define OB_WRP3_PAGES1120TO1135 ((uint32_t)0x00000040) /* Write protection of Sector70 */ +#define OB_WRP3_PAGES1136TO1151 ((uint32_t)0x00000080) /* Write protection of Sector71 */ +#define OB_WRP3_PAGES1152TO1167 ((uint32_t)0x00000100) /* Write protection of Sector72 */ +#define OB_WRP3_PAGES1168TO1183 ((uint32_t)0x00000200) /* Write protection of Sector73 */ +#define OB_WRP3_PAGES1184TO1199 ((uint32_t)0x00000400) /* Write protection of Sector74 */ +#define OB_WRP3_PAGES1200TO1215 ((uint32_t)0x00000800) /* Write protection of Sector75 */ +#define OB_WRP3_PAGES1216TO1231 ((uint32_t)0x00001000) /* Write protection of Sector76 */ +#define OB_WRP3_PAGES1232TO1247 ((uint32_t)0x00002000) /* Write protection of Sector77 */ +#define OB_WRP3_PAGES1248TO1263 ((uint32_t)0x00004000) /* Write protection of Sector78 */ +#define OB_WRP3_PAGES1264TO1279 ((uint32_t)0x00008000) /* Write protection of Sector79 */ +#define OB_WRP3_PAGES1280TO1295 ((uint32_t)0x00010000) /* Write protection of Sector80 */ +#define OB_WRP3_PAGES1296TO1311 ((uint32_t)0x00020000) /* Write protection of Sector81 */ +#define OB_WRP3_PAGES1312TO1327 ((uint32_t)0x00040000) /* Write protection of Sector82 */ +#define OB_WRP3_PAGES1328TO1343 ((uint32_t)0x00080000) /* Write protection of Sector83 */ +#define OB_WRP3_PAGES1344TO1359 ((uint32_t)0x00100000) /* Write protection of Sector84 */ +#define OB_WRP3_PAGES1360TO1375 ((uint32_t)0x00200000) /* Write protection of Sector85 */ +#define OB_WRP3_PAGES1376TO1391 ((uint32_t)0x00400000) /* Write protection of Sector86 */ +#define OB_WRP3_PAGES1392TO1407 ((uint32_t)0x00800000) /* Write protection of Sector87 */ +#define OB_WRP3_PAGES1408TO1423 ((uint32_t)0x01000000) /* Write protection of Sector88 */ +#define OB_WRP3_PAGES1424TO1439 ((uint32_t)0x02000000) /* Write protection of Sector89 */ +#define OB_WRP3_PAGES1440TO1455 ((uint32_t)0x04000000) /* Write protection of Sector90 */ +#define OB_WRP3_PAGES1456TO1471 ((uint32_t)0x08000000) /* Write protection of Sector91 */ +#define OB_WRP3_PAGES1472TO1487 ((uint32_t)0x10000000) /* Write protection of Sector92 */ +#define OB_WRP3_PAGES1488TO1503 ((uint32_t)0x20000000) /* Write protection of Sector93 */ +#define OB_WRP3_PAGES1504TO1519 ((uint32_t)0x40000000) /* Write protection of Sector94 */ +#define OB_WRP3_PAGES1520TO1535 ((uint32_t)0x80000000U) /* Write protection of Sector95 */ + +#define OB_WRP3_ALLPAGES ((uint32_t)FLASH_WRPR3_WRP) /*!< Write protection of all Sectors */ + +/** + * @} + */ + +#endif /* STM32L151xD || STM32L152xD || STM32L162xD || STM32L151xE || STM32L152xE || STM32L162xE*/ + +#if defined(STM32L151xE) || defined(STM32L152xE) || defined(STM32L162xE) || defined(STM32L151xDX) \ + || defined(STM32L152xDX) || defined(STM32L162xDX) + +/** @defgroup FLASHEx_Option_Bytes_Write_Protection4 FLASHEx Option Bytes Write Protection4 + * @{ + */ + +/* Pages for Cat5 devices*/ +#define OB_WRP4_PAGES1536TO1551 ((uint32_t)0x00000001)/* Write protection of Sector96*/ +#define OB_WRP4_PAGES1552TO1567 ((uint32_t)0x00000002)/* Write protection of Sector97*/ +#define OB_WRP4_PAGES1568TO1583 ((uint32_t)0x00000004)/* Write protection of Sector98*/ +#define OB_WRP4_PAGES1584TO1599 ((uint32_t)0x00000008)/* Write protection of Sector99*/ +#define OB_WRP4_PAGES1600TO1615 ((uint32_t)0x00000010) /* Write protection of Sector100*/ +#define OB_WRP4_PAGES1616TO1631 ((uint32_t)0x00000020) /* Write protection of Sector101*/ +#define OB_WRP4_PAGES1632TO1647 ((uint32_t)0x00000040) /* Write protection of Sector102*/ +#define OB_WRP4_PAGES1648TO1663 ((uint32_t)0x00000080) /* Write protection of Sector103*/ +#define OB_WRP4_PAGES1664TO1679 ((uint32_t)0x00000100) /* Write protection of Sector104*/ +#define OB_WRP4_PAGES1680TO1695 ((uint32_t)0x00000200) /* Write protection of Sector105*/ +#define OB_WRP4_PAGES1696TO1711 ((uint32_t)0x00000400) /* Write protection of Sector106*/ +#define OB_WRP4_PAGES1712TO1727 ((uint32_t)0x00000800) /* Write protection of Sector107*/ +#define OB_WRP4_PAGES1728TO1743 ((uint32_t)0x00001000) /* Write protection of Sector108*/ +#define OB_WRP4_PAGES1744TO1759 ((uint32_t)0x00002000) /* Write protection of Sector109*/ +#define OB_WRP4_PAGES1760TO1775 ((uint32_t)0x00004000) /* Write protection of Sector110*/ +#define OB_WRP4_PAGES1776TO1791 ((uint32_t)0x00008000) /* Write protection of Sector111*/ + +#if defined(STM32L151xE) || defined(STM32L152xE) || defined(STM32L162xE) + +#define OB_WRP4_PAGES1792TO1807 ((uint32_t)0x00010000) /* Write protection of Sector112*/ +#define OB_WRP4_PAGES1808TO1823 ((uint32_t)0x00020000) /* Write protection of Sector113*/ +#define OB_WRP4_PAGES1824TO1839 ((uint32_t)0x00040000) /* Write protection of Sector114*/ +#define OB_WRP4_PAGES1840TO1855 ((uint32_t)0x00080000) /* Write protection of Sector115*/ +#define OB_WRP4_PAGES1856TO1871 ((uint32_t)0x00100000) /* Write protection of Sector116*/ +#define OB_WRP4_PAGES1872TO1887 ((uint32_t)0x00200000) /* Write protection of Sector117*/ +#define OB_WRP4_PAGES1888TO1903 ((uint32_t)0x00400000) /* Write protection of Sector118*/ +#define OB_WRP4_PAGES1904TO1919 ((uint32_t)0x00800000) /* Write protection of Sector119*/ +#define OB_WRP4_PAGES1920TO1935 ((uint32_t)0x01000000) /* Write protection of Sector120*/ +#define OB_WRP4_PAGES1936TO1951 ((uint32_t)0x02000000) /* Write protection of Sector121*/ +#define OB_WRP4_PAGES1952TO1967 ((uint32_t)0x04000000) /* Write protection of Sector122*/ +#define OB_WRP4_PAGES1968TO1983 ((uint32_t)0x08000000) /* Write protection of Sector123*/ +#define OB_WRP4_PAGES1984TO1999 ((uint32_t)0x10000000) /* Write protection of Sector124*/ +#define OB_WRP4_PAGES2000TO2015 ((uint32_t)0x20000000) /* Write protection of Sector125*/ +#define OB_WRP4_PAGES2016TO2031 ((uint32_t)0x40000000) /* Write protection of Sector126*/ +#define OB_WRP4_PAGES2032TO2047 ((uint32_t)0x80000000U) /* Write protection of Sector127*/ + +#endif /* STM32L151xE || STM32L152xE || STM32L162xE */ + +#define OB_WRP4_ALLPAGES ((uint32_t)FLASH_WRPR4_WRP) /*!< Write protection of all Sectors */ + +/** + * @} + */ + +#endif /* STM32L151xE || STM32L152xE || STM32L162xE || STM32L151xDX || ... */ + +/** @defgroup FLASHEx_Option_Bytes_Read_Protection FLASHEx Option Bytes Read Protection + * @{ + */ +#define OB_RDP_LEVEL_0 ((uint8_t)0xAAU) +#define OB_RDP_LEVEL_1 ((uint8_t)0xBBU) +#define OB_RDP_LEVEL_2 ((uint8_t)0xCCU) /* Warning: When enabling read protection level 2 + it is no more possible to go back to level 1 or 0 */ + +/** + * @} + */ + +/** @defgroup FLASHEx_Option_Bytes_BOR_Level FLASHEx Option Bytes BOR Level + * @{ + */ + +#define OB_BOR_OFF ((uint8_t)0x00U) /*!< BOR is disabled at power down, the reset is asserted when the VDD + power supply reaches the PDR(Power Down Reset) threshold (1.5V) */ +#define OB_BOR_LEVEL1 ((uint8_t)0x08U) /*!< BOR Reset threshold levels for 1.7V - 1.8V VDD power supply */ +#define OB_BOR_LEVEL2 ((uint8_t)0x09U) /*!< BOR Reset threshold levels for 1.9V - 2.0V VDD power supply */ +#define OB_BOR_LEVEL3 ((uint8_t)0x0AU) /*!< BOR Reset threshold levels for 2.3V - 2.4V VDD power supply */ +#define OB_BOR_LEVEL4 ((uint8_t)0x0BU) /*!< BOR Reset threshold levels for 2.55V - 2.65V VDD power supply */ +#define OB_BOR_LEVEL5 ((uint8_t)0x0CU) /*!< BOR Reset threshold levels for 2.8V - 2.9V VDD power supply */ + +/** + * @} + */ + +/** @defgroup FLASHEx_Option_Bytes_IWatchdog FLASHEx Option Bytes IWatchdog + * @{ + */ + +#define OB_IWDG_SW ((uint8_t)0x10U) /*!< Software WDG selected */ +#define OB_IWDG_HW ((uint8_t)0x00U) /*!< Hardware WDG selected */ + +/** + * @} + */ + +/** @defgroup FLASHEx_Option_Bytes_nRST_STOP FLASHEx Option Bytes nRST_STOP + * @{ + */ + +#define OB_STOP_NORST ((uint8_t)0x20U) /*!< No reset generated when entering in STOP */ +#define OB_STOP_RST ((uint8_t)0x00U) /*!< Reset generated when entering in STOP */ +/** + * @} + */ + +/** @defgroup FLASHEx_Option_Bytes_nRST_STDBY FLASHEx Option Bytes nRST_STDBY + * @{ + */ + +#define OB_STDBY_NORST ((uint8_t)0x40U) /*!< No reset generated when entering in STANDBY */ +#define OB_STDBY_RST ((uint8_t)0x00U) /*!< Reset generated when entering in STANDBY */ + +/** + * @} + */ + +#if defined(FLASH_OBR_SPRMOD) + +/** @defgroup FLASHEx_OptionAdv_Type FLASHEx Option Advanced Type + * @{ + */ + +#define OPTIONBYTE_PCROP ((uint32_t)0x01U) /*!> 16)) /*!< At startup, if boot pins are set in boot from user Flash position + and this parameter is selected the device will boot from Bank1(Default) */ + +/** + * @} + */ +#endif /* FLASH_OBR_nRST_BFB2 */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ + +/** @defgroup FLASHEx_Exported_Macros FLASHEx Exported Macros + * @{ + */ + +/** + * @brief Set the FLASH Latency. + * @param __LATENCY__ FLASH Latency + * This parameter can be one of the following values: + * @arg @ref FLASH_LATENCY_0 FLASH Zero Latency cycle + * @arg @ref FLASH_LATENCY_1 FLASH One Latency cycle + * @retval none + */ +#define __HAL_FLASH_SET_LATENCY(__LATENCY__) do { \ + if ((__LATENCY__) == FLASH_LATENCY_1) {__HAL_FLASH_ACC64_ENABLE();} \ + MODIFY_REG((FLASH->ACR), FLASH_ACR_LATENCY, (__LATENCY__)); \ + } while(0) + +/** + * @brief Get the FLASH Latency. + * @retval FLASH Latency + * This parameter can be one of the following values: + * @arg @ref FLASH_LATENCY_0 FLASH Zero Latency cycle + * @arg @ref FLASH_LATENCY_1 FLASH One Latency cycle + */ +#define __HAL_FLASH_GET_LATENCY() (READ_BIT((FLASH->ACR), FLASH_ACR_LATENCY)) + +/** + * @brief Enable the FLASH 64-bit access. + * @note Read access 64 bit is used. + * @note This bit cannot be written at the same time as the LATENCY and + * PRFTEN bits. + * @retval none + */ +#define __HAL_FLASH_ACC64_ENABLE() (SET_BIT((FLASH->ACR), FLASH_ACR_ACC64)) + + /** + * @brief Disable the FLASH 64-bit access. + * @note Read access 32 bit is used + * @note To reset this bit, the LATENCY should be zero wait state and the + * prefetch off. + * @retval none + */ +#define __HAL_FLASH_ACC64_DISABLE() (CLEAR_BIT((FLASH->ACR), FLASH_ACR_ACC64)) + +/** + * @brief Enable the FLASH prefetch buffer. + * @retval none + */ +#define __HAL_FLASH_PREFETCH_BUFFER_ENABLE() do { __HAL_FLASH_ACC64_ENABLE(); \ + SET_BIT((FLASH->ACR), FLASH_ACR_PRFTEN); \ + } while(0) + +/** + * @brief Disable the FLASH prefetch buffer. + * @retval none + */ +#define __HAL_FLASH_PREFETCH_BUFFER_DISABLE() CLEAR_BIT((FLASH->ACR), FLASH_ACR_PRFTEN) + +/** + * @brief Enable the FLASH power down during Sleep mode + * @retval none + */ +#define __HAL_FLASH_SLEEP_POWERDOWN_ENABLE() SET_BIT(FLASH->ACR, FLASH_ACR_SLEEP_PD) + +/** + * @brief Disable the FLASH power down during Sleep mode + * @retval none + */ +#define __HAL_FLASH_SLEEP_POWERDOWN_DISABLE() CLEAR_BIT(FLASH->ACR, FLASH_ACR_SLEEP_PD) + +/** + * @brief Enable the Flash Run power down mode. + * @note Writing this bit to 0 this bit, automatically the keys are + * loss and a new unlock sequence is necessary to re-write it to 1. + */ +#define __HAL_FLASH_POWER_DOWN_ENABLE() do { FLASH->PDKEYR = FLASH_PDKEY1; \ + FLASH->PDKEYR = FLASH_PDKEY2; \ + SET_BIT((FLASH->ACR), FLASH_ACR_RUN_PD); \ + } while (0) + +/** + * @brief Disable the Flash Run power down mode. + * @note Writing this bit to 0 this bit, automatically the keys are + * loss and a new unlock sequence is necessary to re-write it to 1. + */ +#define __HAL_FLASH_POWER_DOWN_DISABLE() do { FLASH->PDKEYR = FLASH_PDKEY1; \ + FLASH->PDKEYR = FLASH_PDKEY2; \ + CLEAR_BIT((FLASH->ACR), FLASH_ACR_RUN_PD); \ + } while (0) + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup FLASHEx_Exported_Functions + * @{ + */ + +/** @addtogroup FLASHEx_Exported_Functions_Group1 + * @{ + */ + +HAL_StatusTypeDef HAL_FLASHEx_Erase(FLASH_EraseInitTypeDef *pEraseInit, uint32_t *PageError); +HAL_StatusTypeDef HAL_FLASHEx_Erase_IT(FLASH_EraseInitTypeDef *pEraseInit); + +/** + * @} + */ + +/** @addtogroup FLASHEx_Exported_Functions_Group2 + * @{ + */ + +HAL_StatusTypeDef HAL_FLASHEx_OBProgram(FLASH_OBProgramInitTypeDef *pOBInit); +void HAL_FLASHEx_OBGetConfig(FLASH_OBProgramInitTypeDef *pOBInit); + +#if defined(FLASH_OBR_SPRMOD) || defined(FLASH_OBR_nRST_BFB2) + +HAL_StatusTypeDef HAL_FLASHEx_AdvOBProgram (FLASH_AdvOBProgramInitTypeDef *pAdvOBInit); +void HAL_FLASHEx_AdvOBGetConfig(FLASH_AdvOBProgramInitTypeDef *pAdvOBInit); + +#endif /* FLASH_OBR_SPRMOD || FLASH_OBR_nRST_BFB2 */ + +#if defined(FLASH_OBR_SPRMOD) + +HAL_StatusTypeDef HAL_FLASHEx_OB_SelectPCROP(void); +HAL_StatusTypeDef HAL_FLASHEx_OB_DeSelectPCROP(void); + +#endif /* FLASH_OBR_SPRMOD */ + +/** + * @} + */ + +/** @addtogroup FLASHEx_Exported_Functions_Group3 + * @{ + */ + +HAL_StatusTypeDef HAL_FLASHEx_DATAEEPROM_Unlock(void); +HAL_StatusTypeDef HAL_FLASHEx_DATAEEPROM_Lock(void); + +HAL_StatusTypeDef HAL_FLASHEx_DATAEEPROM_Erase(uint32_t TypeErase, uint32_t Address); +HAL_StatusTypeDef HAL_FLASHEx_DATAEEPROM_Program(uint32_t TypeProgram, uint32_t Address, uint32_t Data); +void HAL_FLASHEx_DATAEEPROM_EnableFixedTimeProgram(void); +void HAL_FLASHEx_DATAEEPROM_DisableFixedTimeProgram(void); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32L1xx_HAL_FLASH_EX_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_flash_ramfunc.h b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_flash_ramfunc.h new file mode 100755 index 0000000..88a4ac2 --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_flash_ramfunc.h @@ -0,0 +1,137 @@ +/** + ****************************************************************************** + * @file stm32l1xx_hal_flash_ramfunc.h + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief Header file of FLASH RAMFUNC driver. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L1xx_FLASH_RAMFUNC_H +#define __STM32L1xx_FLASH_RAMFUNC_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_hal_def.h" + +/** @addtogroup STM32L1xx_HAL_Driver + * @{ + */ + +/** @addtogroup FLASH_RAMFUNC + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + + +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup FLASH_RAMFUNC_Exported_Functions + * @{ + */ + +/* + * @brief FLASH memory functions that should be executed from internal SRAM. + * These functions are defined inside the "stm32l1xx_hal_flash_ramfunc.c" + * file. + */ + +/** @addtogroup FLASH_RAMFUNC_Exported_Functions_Group1 + * @{ + */ + +__RAM_FUNC HAL_FLASHEx_EnableRunPowerDown(void); +__RAM_FUNC HAL_FLASHEx_DisableRunPowerDown(void); + +/** + * @} + */ + +/** @addtogroup FLASH_RAMFUNC_Exported_Functions_Group2 + * @{ + */ + +#if defined(FLASH_PECR_PARALLBANK) + +__RAM_FUNC HAL_FLASHEx_EraseParallelPage(uint32_t Page_Address1, uint32_t Page_Address2); +__RAM_FUNC HAL_FLASHEx_ProgramParallelHalfPage(uint32_t Address1, uint32_t* pBuffer1, uint32_t Address2, uint32_t* pBuffer2); + +#endif /* FLASH_PECR_PARALLBANK */ + +__RAM_FUNC HAL_FLASHEx_HalfPageProgram(uint32_t Address, uint32_t* pBuffer); + +/** + * @} + */ + +/** @addtogroup FLASH_RAMFUNC_Exported_Functions_Group3 + * @{ + */ +__RAM_FUNC HAL_FLASHEx_GetError(uint32_t *Error); +/** + * @} + */ + +/** @addtogroup FLASH_RAMFUNC_Exported_Functions_Group4 + * @{ + */ + +__RAM_FUNC HAL_FLASHEx_DATAEEPROM_EraseDoubleWord(uint32_t Address); +__RAM_FUNC HAL_FLASHEx_DATAEEPROM_ProgramDoubleWord(uint32_t Address, uint64_t Data); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32L1xx_FLASH_RAMFUNC_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_gpio.h b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_gpio.h new file mode 100755 index 0000000..8cffd01 --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_gpio.h @@ -0,0 +1,338 @@ +/** + ****************************************************************************** + * @file stm32l1xx_hal_gpio.h + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief Header file of GPIO HAL module. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L1xx_HAL_GPIO_H +#define __STM32L1xx_HAL_GPIO_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_hal_def.h" + +/** @addtogroup STM32L1xx_HAL_Driver + * @{ + */ + +/** @defgroup GPIO GPIO + * @brief GPIO HAL module driver + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup GPIO_Exported_Types GPIO Exported Types + * @{ + */ +/** + * @brief GPIO Init structure definition + */ +typedef struct +{ + uint32_t Pin; /*!< Specifies the GPIO pins to be configured. + This parameter can be any value of @ref GPIO_pins */ + + uint32_t Mode; /*!< Specifies the operating mode for the selected pins. + This parameter can be a value of @ref GPIO_mode */ + + uint32_t Pull; /*!< Specifies the Pull-up or Pull-Down activation for the selected pins. + This parameter can be a value of @ref GPIO_pull */ + + uint32_t Speed; /*!< Specifies the speed for the selected pins. + This parameter can be a value of @ref GPIO_speed */ + + uint32_t Alternate; /*!< Peripheral to be connected to the selected pins + This parameter can be a value of @ref GPIOEx_Alternate_function_selection */ +}GPIO_InitTypeDef; + +/** + * @brief GPIO Bit SET and Bit RESET enumeration + */ +typedef enum +{ + GPIO_PIN_RESET = 0, + GPIO_PIN_SET +}GPIO_PinState; +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup GPIO_Exported_Constants GPIO Exported Constants + * @{ + */ + + +/** @defgroup GPIO_pins GPIO pins + * @{ + */ +#define GPIO_PIN_0 ((uint16_t)0x0001) /* Pin 0 selected */ +#define GPIO_PIN_1 ((uint16_t)0x0002) /* Pin 1 selected */ +#define GPIO_PIN_2 ((uint16_t)0x0004) /* Pin 2 selected */ +#define GPIO_PIN_3 ((uint16_t)0x0008) /* Pin 3 selected */ +#define GPIO_PIN_4 ((uint16_t)0x0010) /* Pin 4 selected */ +#define GPIO_PIN_5 ((uint16_t)0x0020) /* Pin 5 selected */ +#define GPIO_PIN_6 ((uint16_t)0x0040) /* Pin 6 selected */ +#define GPIO_PIN_7 ((uint16_t)0x0080) /* Pin 7 selected */ +#define GPIO_PIN_8 ((uint16_t)0x0100) /* Pin 8 selected */ +#define GPIO_PIN_9 ((uint16_t)0x0200) /* Pin 9 selected */ +#define GPIO_PIN_10 ((uint16_t)0x0400) /* Pin 10 selected */ +#define GPIO_PIN_11 ((uint16_t)0x0800) /* Pin 11 selected */ +#define GPIO_PIN_12 ((uint16_t)0x1000) /* Pin 12 selected */ +#define GPIO_PIN_13 ((uint16_t)0x2000) /* Pin 13 selected */ +#define GPIO_PIN_14 ((uint16_t)0x4000) /* Pin 14 selected */ +#define GPIO_PIN_15 ((uint16_t)0x8000) /* Pin 15 selected */ +#define GPIO_PIN_All ((uint16_t)0xFFFF) /* All pins selected */ + +#define GPIO_PIN_MASK ((uint32_t)0x0000FFFF) /* PIN mask for assert test */ +/** + * @} + */ + +/** @defgroup GPIO_mode GPIO mode + * @brief GPIO Configuration Mode + * Elements values convention: 0xX0yz00YZ + * - X : GPIO mode or EXTI Mode + * - y : External IT or Event trigger detection + * - z : IO configuration on External IT or Event + * - Y : Output type (Push Pull or Open Drain) + * - Z : IO Direction mode (Input, Output, Alternate or Analog) + * @{ + */ +#define GPIO_MODE_INPUT ((uint32_t)0x00000000) /*!< Input Floating Mode */ +#define GPIO_MODE_OUTPUT_PP ((uint32_t)0x00000001) /*!< Output Push Pull Mode */ +#define GPIO_MODE_OUTPUT_OD ((uint32_t)0x00000011) /*!< Output Open Drain Mode */ +#define GPIO_MODE_AF_PP ((uint32_t)0x00000002) /*!< Alternate Function Push Pull Mode */ +#define GPIO_MODE_AF_OD ((uint32_t)0x00000012) /*!< Alternate Function Open Drain Mode */ + +#define GPIO_MODE_ANALOG ((uint32_t)0x00000003) /*!< Analog Mode */ + +#define GPIO_MODE_IT_RISING ((uint32_t)0x10110000) /*!< External Interrupt Mode with Rising edge trigger detection */ +#define GPIO_MODE_IT_FALLING ((uint32_t)0x10210000) /*!< External Interrupt Mode with Falling edge trigger detection */ +#define GPIO_MODE_IT_RISING_FALLING ((uint32_t)0x10310000) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */ + +#define GPIO_MODE_EVT_RISING ((uint32_t)0x10120000) /*!< External Event Mode with Rising edge trigger detection */ +#define GPIO_MODE_EVT_FALLING ((uint32_t)0x10220000) /*!< External Event Mode with Falling edge trigger detection */ +#define GPIO_MODE_EVT_RISING_FALLING ((uint32_t)0x10320000) /*!< External Event Mode with Rising/Falling edge trigger detection */ + +/** + * @} + */ + +/** @defgroup GPIO_speed GPIO speed + * @brief GPIO Output Maximum frequency + * @{ + */ +#define GPIO_SPEED_FREQ_LOW ((uint32_t)0x00000000) /*!< max: 400 KHz, please refer to the product datasheet */ +#define GPIO_SPEED_FREQ_MEDIUM ((uint32_t)0x00000001) /*!< max: 1 MHz to 2 MHz, please refer to the product datasheet */ +#define GPIO_SPEED_FREQ_HIGH ((uint32_t)0x00000002) /*!< max: 2 MHz to 10 MHz, please refer to the product datasheet */ +#define GPIO_SPEED_FREQ_VERY_HIGH ((uint32_t)0x00000003) /*!< max: 8 MHz to 50 MHz, please refer to the product datasheet */ + +/** + * @} + */ + + /** @defgroup GPIO_pull GPIO pull + * @brief GPIO Pull-Up or Pull-Down Activation + * @{ + */ +#define GPIO_NOPULL ((uint32_t)0x00000000) /*!< No Pull-up or Pull-down activation */ +#define GPIO_PULLUP ((uint32_t)0x00000001) /*!< Pull-up activation */ +#define GPIO_PULLDOWN ((uint32_t)0x00000002) /*!< Pull-down activation */ + +/** + * @} + */ + +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup GPIO_Private_Constants GPIO Private Constants + * @{ + */ + +/** + * @} + */ + +/* Private macros --------------------------------------------------------*/ +/** @defgroup GPIO_Private_Macros GPIO Private Macros + * @{ + */ + +#define IS_GPIO_PIN_ACTION(ACTION) (((ACTION) == GPIO_PIN_RESET) || ((ACTION) == GPIO_PIN_SET)) + +#define IS_GPIO_PIN(__PIN__) ((((__PIN__) & GPIO_PIN_MASK) != (uint32_t)0x00) &&\ + (((__PIN__) & ~GPIO_PIN_MASK) == (uint32_t)0x00)) + +#define IS_GPIO_PULL(PULL) (((PULL) == GPIO_NOPULL) || ((PULL) == GPIO_PULLUP) || \ + ((PULL) == GPIO_PULLDOWN)) + +#define IS_GPIO_SPEED(SPEED) (((SPEED) == GPIO_SPEED_FREQ_LOW) || ((SPEED) == GPIO_SPEED_FREQ_MEDIUM) || \ + ((SPEED) == GPIO_SPEED_FREQ_HIGH) || ((SPEED) == GPIO_SPEED_FREQ_VERY_HIGH)) + +#define IS_GPIO_MODE(MODE) (((MODE) == GPIO_MODE_INPUT) ||\ + ((MODE) == GPIO_MODE_OUTPUT_PP) ||\ + ((MODE) == GPIO_MODE_OUTPUT_OD) ||\ + ((MODE) == GPIO_MODE_AF_PP) ||\ + ((MODE) == GPIO_MODE_AF_OD) ||\ + ((MODE) == GPIO_MODE_IT_RISING) ||\ + ((MODE) == GPIO_MODE_IT_FALLING) ||\ + ((MODE) == GPIO_MODE_IT_RISING_FALLING) ||\ + ((MODE) == GPIO_MODE_EVT_RISING) ||\ + ((MODE) == GPIO_MODE_EVT_FALLING) ||\ + ((MODE) == GPIO_MODE_EVT_RISING_FALLING) ||\ + ((MODE) == GPIO_MODE_ANALOG)) + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ + +/** @defgroup GPIO_Exported_Macros GPIO Exported Macros + * @{ + */ + +/** + * @brief Checks whether the specified EXTI line flag is set or not. + * @param __EXTI_LINE__: specifies the EXTI line flag to check. + * This parameter can be GPIO_PIN_x where x can be(0..15) + * @retval The new state of __EXTI_LINE__ (SET or RESET). + */ +#define __HAL_GPIO_EXTI_GET_FLAG(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__)) + +/** + * @brief Clears the EXTI's line pending flags. + * @param __EXTI_LINE__: specifies the EXTI lines flags to clear. + * This parameter can be any combination of GPIO_PIN_x where x can be (0..15) + * @retval None + */ +#define __HAL_GPIO_EXTI_CLEAR_FLAG(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__)) + +/** + * @brief Checks whether the specified EXTI line is asserted or not. + * @param __EXTI_LINE__: specifies the EXTI line to check. + * This parameter can be GPIO_PIN_x where x can be(0..15) + * @retval The new state of __EXTI_LINE__ (SET or RESET). + */ +#define __HAL_GPIO_EXTI_GET_IT(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__)) + +/** + * @brief Clears the EXTI's line pending bits. + * @param __EXTI_LINE__: specifies the EXTI lines to clear. + * This parameter can be any combination of GPIO_PIN_x where x can be (0..15) + * @retval None + */ +#define __HAL_GPIO_EXTI_CLEAR_IT(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__)) + +/** + * @brief Generates a Software interrupt on selected EXTI line. + * @param __EXTI_LINE__: specifies the EXTI line to check. + * This parameter can be GPIO_PIN_x where x can be(0..15) + * @retval None + */ +#define __HAL_GPIO_EXTI_GENERATE_SWIT(__EXTI_LINE__) (EXTI->SWIER |= (__EXTI_LINE__)) + +/** + * @} + */ + +/* Include GPIO HAL Extension module */ +#include "stm32l1xx_hal_gpio_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup GPIO_Exported_Functions GPIO Exported Functions + * @brief GPIO Exported Functions + * @{ + */ + +/** @defgroup GPIO_Exported_Functions_Group1 Initialization and Configuration functions + * @brief Initialization and Configuration functions + * @{ + */ + +/* Initialization and de-initialization functions *****************************/ +void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init); +void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin); + +/** + * @} + */ + +/** @defgroup GPIO_Exported_Functions_Group2 IO operation functions + * @brief IO operation functions + * @{ + */ + +/* IO operation functions *****************************************************/ +GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); +void HAL_GPIO_WritePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState); +void HAL_GPIO_TogglePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); +HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); +void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin); +void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32L1xx_HAL_GPIO_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_gpio_ex.h b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_gpio_ex.h new file mode 100755 index 0000000..0daedcd --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_gpio_ex.h @@ -0,0 +1,223 @@ +/** + ****************************************************************************** + * @file stm32l1xx_hal_gpio_ex.h + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief Header file of GPIO HAL Extension module. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L1xx_HAL_GPIO_EX_H +#define __STM32L1xx_HAL_GPIO_EX_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_hal_def.h" + +/** @addtogroup STM32L1xx_HAL_Driver + * @{ + */ + +/** @defgroup GPIOEx GPIOEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup GPIOEx_Exported_Constants GPIOEx Exported Constants + * @{ + */ + +/** @defgroup GPIOEx_Alternate_function_selection GPIOEx Alternate function selection + * @{ + */ + +/* AF 0 selection */ +#define GPIO_AF0_MCO ((uint8_t)0x00) /*!< MCO Alternate Function mapping */ +#define GPIO_AF0_TAMPER ((uint8_t)0x00) /*!< TAMPER Alternate Function mapping */ +#define GPIO_AF0_SWJ ((uint8_t)0x00) /*!< SWJ (SWD and JTAG) Alternate Function mapping */ +#define GPIO_AF0_TRACE ((uint8_t)0x00) /*!< TRACE Alternate Function mapping */ +#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /*!< RTC_OUT Alternate Function mapping */ + +/* AF 1 selection */ +#define GPIO_AF1_TIM2 ((uint8_t)0x01) /*!< TIM2 Alternate Function mapping */ + +/* AF 2 selection */ +#define GPIO_AF2_TIM3 ((uint8_t)0x02) /*!< TIM3 Alternate Function mapping */ +#define GPIO_AF2_TIM4 ((uint8_t)0x02) /*!< TIM4 Alternate Function mapping */ +#if defined (STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined (STM32L151xE) || defined (STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) || defined (STM32L162xC) || defined (STM32L152xC) || defined (STM32L151xC) +#define GPIO_AF2_TIM5 ((uint8_t)0x02) /*!< TIM5 Alternate Function mapping */ + +#endif /* STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD ...STM32L151xC */ + +/* AF 3 selection */ +#define GPIO_AF3_TIM9 ((uint8_t)0x03) /*!< TIM9 Alternate Function mapping */ +#define GPIO_AF3_TIM10 ((uint8_t)0x03) /*!< TIM10 Alternate Function mapping */ +#define GPIO_AF3_TIM11 ((uint8_t)0x03) /*!< TIM11 Alternate Function mapping */ + + +/* AF 4 selection */ +#define GPIO_AF4_I2C1 ((uint8_t)0x04) /*!< I2C1 Alternate Function mapping */ +#define GPIO_AF4_I2C2 ((uint8_t)0x04) /*!< I2C2 Alternate Function mapping */ + +/* AF 5 selection */ +#define GPIO_AF5_SPI1 ((uint8_t)0x05) /*!< SPI1/I2S1 Alternate Function mapping */ +#define GPIO_AF5_SPI2 ((uint8_t)0x05) /*!< SPI2/I2S2 Alternate Function mapping */ + +/* AF 6 selection */ +#if defined (STM32L100xC) || defined (STM32L151xC) || defined (STM32L151xCA) || defined (STM32L151xD) || defined (STM32L151xE) || defined (STM32L151xDX) ||\ + defined (STM32L152xC) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L152xE) || defined (STM32L152xDX) ||\ + defined (STM32L162xC) || defined (STM32L162xCA) || defined (STM32L162xD) || defined (STM32L162xE) || defined (STM32L162xDX) + +#define GPIO_AF6_SPI3 ((uint8_t)0x06) /*!< SPI3/I2S3 Alternate Function mapping */ + +#endif /* STM32L100xC || STM32L151xC || (...) || STM32L162xD || STM32L162xE || STM32L162xDX */ + + +/* AF 7 selection */ +#define GPIO_AF7_USART1 ((uint8_t)0x07) /*!< USART1 Alternate Function mapping */ +#define GPIO_AF7_USART2 ((uint8_t)0x07) /*!< USART2 Alternate Function mapping */ +#define GPIO_AF7_USART3 ((uint8_t)0x07) /*!< USART3 Alternate Function mapping */ + +/* AF 8 selection */ +#if defined (STM32L151xD) || defined (STM32L151xE) || defined (STM32L151xDX) ||\ + defined (STM32L152xD) || defined (STM32L152xE) || defined (STM32L152xDX) ||\ + defined (STM32L162xD) || defined (STM32L162xE) || defined (STM32L162xDX) + +#define GPIO_AF8_UART4 ((uint8_t)0x08) /*!< UART4 Alternate Function mapping */ +#define GPIO_AF8_UART5 ((uint8_t)0x08) /*!< UART5 Alternate Function mapping */ + +#endif /* STM32L151xD || STM32L151xE || STM32L151xDX || STM32L152xD || STM32L 152xE || STM32L162xD || STM32L162xE || STM32L162xDX */ + + +/* AF 9 selection */ + +/* AF 10 selection */ + +/* AF 11 selection */ +#if defined (STM32L100xB) || defined (STM32L100xBA) || defined (STM32L100xC) ||\ + defined (STM32L152xB) || defined (STM32L152xBA) || defined (STM32L152xC) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L152xE) || defined (STM32L152xDX) ||\ + defined (STM32L162xC) || defined (STM32L162xCA) || defined (STM32L162xD) || defined (STM32L162xE) || defined (STM32L162xDX) + +#define GPIO_AF11_LCD ((uint8_t)0x0B) /*!< LCD Alternate Function mapping */ + +#endif /* STM32L100xB || STM32L100xBA || STM32L100xC || (...) || STM32L162xCA || STM32L162xD || STM32L162xE || STM32L162xDX */ + +/* AF 12 selection */ +#if defined (STM32L151xD) || defined (STM32L152xD) || defined (STM32L162xD) + +#define GPIO_AF12_FSMC ((uint8_t)0x0C) /*!< FSMC Alternate Function mapping */ +#define GPIO_AF12_SDIO ((uint8_t)0x0C) /*!< SDIO Alternate Function mapping */ + +#endif /* STM32L151xD || STM32L152xD || STM32L162xD */ +/* AF 13 selection */ + +/* AF 14 selection */ +#define GPIO_AF14_TIM_IC1 ((uint8_t)0x0E) /*!< TIMER INPUT CAPTURE Alternate Function mapping */ +#define GPIO_AF14_TIM_IC2 ((uint8_t)0x0E) /*!< TIMER INPUT CAPTURE Alternate Function mapping */ +#define GPIO_AF14_TIM_IC3 ((uint8_t)0x0E) /*!< TIMER INPUT CAPTURE Alternate Function mapping */ +#define GPIO_AF14_TIM_IC4 ((uint8_t)0x0E) /*!< TIMER INPUT CAPTURE Alternate Function mapping */ + +/* AF 15 selection */ +#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /*!< EVENTOUT Alternate Function mapping */ + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup GPIOEx_Private_Macros GPIOEx Private Macros + * @{ + */ + + +#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x0F) + + +#if defined (STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined (STM32L151xE) || defined (STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) +#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0U :\ + ((__GPIOx__) == (GPIOB))? 1U :\ + ((__GPIOx__) == (GPIOC))? 2U :\ + ((__GPIOx__) == (GPIOD))? 3U :\ + ((__GPIOx__) == (GPIOE))? 4U :\ + ((__GPIOx__) == (GPIOH))? 5U :\ + ((__GPIOx__) == (GPIOF))? 6U : 7U) +#endif + +#if defined (STM32L151xB) || defined (STM32L151xBA) || defined (STM32L151xC) || defined (STM32L152xB) || defined (STM32L152xBA) || defined (STM32L152xC) || defined (STM32L162xC) +#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0U :\ + ((__GPIOx__) == (GPIOB))? 1U :\ + ((__GPIOx__) == (GPIOC))? 2U :\ + ((__GPIOx__) == (GPIOD))? 3U :\ + ((__GPIOx__) == (GPIOE))? 4U : 5U) +#endif + +#if defined (STM32L100xB) || defined (STM32L100xBA) || defined (STM32L100xC) +#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0U :\ + ((__GPIOx__) == (GPIOB))? 1U :\ + ((__GPIOx__) == (GPIOC))? 2U :\ + ((__GPIOx__) == (GPIOD))? 3U : 5U) +#endif + + + +/** + * @} + */ + + + +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32L1xx_HAL_GPIO_EX_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_i2c.h b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_i2c.h new file mode 100755 index 0000000..bd69a40 --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_i2c.h @@ -0,0 +1,669 @@ +/** + ****************************************************************************** + * @file stm32l1xx_hal_i2c.h + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief Header file of I2C HAL module. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L1xx_HAL_I2C_H +#define __STM32L1xx_HAL_I2C_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_hal_def.h" + +/** @addtogroup STM32L1xx_HAL_Driver + * @{ + */ + +/** @addtogroup I2C + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup I2C_Exported_Types I2C Exported Types + * @{ + */ + +/** @defgroup I2C_Configuration_Structure_definition I2C Configuration Structure definition + * @brief I2C Configuration Structure definition + * @{ + */ +typedef struct +{ + uint32_t ClockSpeed; /*!< Specifies the clock frequency. + This parameter must be set to a value lower than 400kHz */ + + uint32_t DutyCycle; /*!< Specifies the I2C fast mode duty cycle. + This parameter can be a value of @ref I2C_duty_cycle_in_fast_mode */ + + uint32_t OwnAddress1; /*!< Specifies the first device own address. + This parameter can be a 7-bit or 10-bit address. */ + + uint32_t AddressingMode; /*!< Specifies if 7-bit or 10-bit addressing mode is selected. + This parameter can be a value of @ref I2C_addressing_mode */ + + uint32_t DualAddressMode; /*!< Specifies if dual addressing mode is selected. + This parameter can be a value of @ref I2C_dual_addressing_mode */ + + uint32_t OwnAddress2; /*!< Specifies the second device own address if dual addressing mode is selected + This parameter can be a 7-bit address. */ + + uint32_t GeneralCallMode; /*!< Specifies if general call mode is selected. + This parameter can be a value of @ref I2C_general_call_addressing_mode */ + + uint32_t NoStretchMode; /*!< Specifies if nostretch mode is selected. + This parameter can be a value of @ref I2C_nostretch_mode */ + +}I2C_InitTypeDef; + +/** + * @} + */ + +/** @defgroup HAL_state_structure_definition HAL state structure definition + * @brief HAL State structure definition + * @note HAL I2C State value coding follow below described bitmap : + * b7-b6 Error information + * 00 : No Error + * 01 : Abort (Abort user request on going) + * 10 : Timeout + * 11 : Error + * b5 IP initilisation status + * 0 : Reset (IP not initialized) + * 1 : Init done (IP initialized and ready to use. HAL I2C Init function called) + * b4 (not used) + * x : Should be set to 0 + * b3 + * 0 : Ready or Busy (No Listen mode ongoing) + * 1 : Listen (IP in Address Listen Mode) + * b2 Intrinsic process state + * 0 : Ready + * 1 : Busy (IP busy with some configuration or internal operations) + * b1 Rx state + * 0 : Ready (no Rx operation ongoing) + * 1 : Busy (Rx operation ongoing) + * b0 Tx state + * 0 : Ready (no Tx operation ongoing) + * 1 : Busy (Tx operation ongoing) + * @{ + */ +typedef enum +{ + HAL_I2C_STATE_RESET = 0x00U, /*!< Peripheral is not yet Initialized */ + HAL_I2C_STATE_READY = 0x20U, /*!< Peripheral Initialized and ready for use */ + HAL_I2C_STATE_BUSY = 0x24U, /*!< An internal process is ongoing */ + HAL_I2C_STATE_BUSY_TX = 0x21U, /*!< Data Transmission process is ongoing */ + HAL_I2C_STATE_BUSY_RX = 0x22U, /*!< Data Reception process is ongoing */ + HAL_I2C_STATE_LISTEN = 0x28U, /*!< Address Listen Mode is ongoing */ + HAL_I2C_STATE_BUSY_TX_LISTEN = 0x29U, /*!< Address Listen Mode and Data Transmission + process is ongoing */ + HAL_I2C_STATE_BUSY_RX_LISTEN = 0x2AU, /*!< Address Listen Mode and Data Reception + process is ongoing */ + HAL_I2C_STATE_ABORT = 0x60U, /*!< Abort user request ongoing */ + HAL_I2C_STATE_TIMEOUT = 0xA0U, /*!< Timeout state */ + HAL_I2C_STATE_ERROR = 0xE0U /*!< Error */ + +}HAL_I2C_StateTypeDef; + +/** + * @} + */ + +/** @defgroup HAL_mode_structure_definition HAL mode structure definition + * @brief HAL Mode structure definition + * @note HAL I2C Mode value coding follow below described bitmap : + * b7 (not used) + * x : Should be set to 0 + * b6 + * 0 : None + * 1 : Memory (HAL I2C communication is in Memory Mode) + * b5 + * 0 : None + * 1 : Slave (HAL I2C communication is in Slave Mode) + * b4 + * 0 : None + * 1 : Master (HAL I2C communication is in Master Mode) + * b3-b2-b1-b0 (not used) + * xxxx : Should be set to 0000 + * @{ + */ +typedef enum +{ + HAL_I2C_MODE_NONE = 0x00U, /*!< No I2C communication on going */ + HAL_I2C_MODE_MASTER = 0x10U, /*!< I2C communication is in Master Mode */ + HAL_I2C_MODE_SLAVE = 0x20U, /*!< I2C communication is in Slave Mode */ + HAL_I2C_MODE_MEM = 0x40U /*!< I2C communication is in Memory Mode */ + +}HAL_I2C_ModeTypeDef; + +/** + * @} + */ + +/** @defgroup I2C_Error_Code_definition I2C Error Code definition + * @brief I2C Error Code definition + * @{ + */ +#define HAL_I2C_ERROR_NONE ((uint32_t)0x00000000U) /*!< No error */ +#define HAL_I2C_ERROR_BERR ((uint32_t)0x00000001U) /*!< BERR error */ +#define HAL_I2C_ERROR_ARLO ((uint32_t)0x00000002U) /*!< ARLO error */ +#define HAL_I2C_ERROR_AF ((uint32_t)0x00000004U) /*!< AF error */ +#define HAL_I2C_ERROR_OVR ((uint32_t)0x00000008U) /*!< OVR error */ +#define HAL_I2C_ERROR_DMA ((uint32_t)0x00000010U) /*!< DMA transfer error */ +#define HAL_I2C_ERROR_TIMEOUT ((uint32_t)0x00000020U) /*!< Timeout Error */ +/** + * @} + */ + +/** @defgroup I2C_handle_Structure_definition I2C handle Structure definition + * @brief I2C handle Structure definition + * @{ + */ +typedef struct +{ + I2C_TypeDef *Instance; /*!< I2C registers base address */ + + I2C_InitTypeDef Init; /*!< I2C communication parameters */ + + uint8_t *pBuffPtr; /*!< Pointer to I2C transfer buffer */ + + uint16_t XferSize; /*!< I2C transfer size */ + + __IO uint16_t XferCount; /*!< I2C transfer counter */ + + __IO uint32_t XferOptions; /*!< I2C transfer options */ + + __IO uint32_t PreviousState; /*!< I2C communication Previous state and mode + context for internal usage */ + + DMA_HandleTypeDef *hdmatx; /*!< I2C Tx DMA handle parameters */ + + DMA_HandleTypeDef *hdmarx; /*!< I2C Rx DMA handle parameters */ + + HAL_LockTypeDef Lock; /*!< I2C locking object */ + + __IO HAL_I2C_StateTypeDef State; /*!< I2C communication state */ + + __IO HAL_I2C_ModeTypeDef Mode; /*!< I2C communication mode */ + + __IO uint32_t ErrorCode; /*!< I2C Error code */ + + __IO uint32_t Devaddress; /*!< I2C Target device address */ + + __IO uint32_t Memaddress; /*!< I2C Target memory address */ + + __IO uint32_t MemaddSize; /*!< I2C Target memory address size */ + + __IO uint32_t EventCount; /*!< I2C Event counter */ + +}I2C_HandleTypeDef; + +/** + * @} + */ + +/** + * @} + */ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup I2C_Exported_Constants I2C Exported Constants + * @{ + */ + +/** @defgroup I2C_duty_cycle_in_fast_mode I2C duty cycle in fast mode + * @{ + */ +#define I2C_DUTYCYCLE_2 ((uint32_t)0x00000000U) +#define I2C_DUTYCYCLE_16_9 I2C_CCR_DUTY +/** + * @} + */ + +/** @defgroup I2C_addressing_mode I2C addressing mode + * @{ + */ +#define I2C_ADDRESSINGMODE_7BIT ((uint32_t)0x00004000U) +#define I2C_ADDRESSINGMODE_10BIT (I2C_OAR1_ADDMODE | ((uint32_t)0x00004000U)) +/** + * @} + */ + +/** @defgroup I2C_dual_addressing_mode I2C dual addressing mode + * @{ + */ +#define I2C_DUALADDRESS_DISABLE ((uint32_t)0x00000000U) +#define I2C_DUALADDRESS_ENABLE I2C_OAR2_ENDUAL +/** + * @} + */ + +/** @defgroup I2C_general_call_addressing_mode I2C general call addressing mode + * @{ + */ +#define I2C_GENERALCALL_DISABLE ((uint32_t)0x00000000U) +#define I2C_GENERALCALL_ENABLE I2C_CR1_ENGC +/** + * @} + */ + +/** @defgroup I2C_nostretch_mode I2C nostretch mode + * @{ + */ +#define I2C_NOSTRETCH_DISABLE ((uint32_t)0x00000000U) +#define I2C_NOSTRETCH_ENABLE I2C_CR1_NOSTRETCH +/** + * @} + */ + +/** @defgroup I2C_Memory_Address_Size I2C Memory Address Size + * @{ + */ +#define I2C_MEMADD_SIZE_8BIT ((uint32_t)0x00000001U) +#define I2C_MEMADD_SIZE_16BIT ((uint32_t)0x00000010U) +/** + * @} + */ + +/** @defgroup I2C_XferDirection_definition I2C XferDirection definition Master Point of View + * @{ + */ +#define I2C_DIRECTION_RECEIVE ((uint32_t)0x00000000U) +#define I2C_DIRECTION_TRANSMIT ((uint32_t)0x00000001U) +/** + * @} + */ + +/** @defgroup I2C_XferOptions_definition I2C XferOptions definition + * @{ + */ +#define I2C_FIRST_FRAME ((uint32_t)0x00000001U) +#define I2C_NEXT_FRAME ((uint32_t)0x00000002U) +#define I2C_FIRST_AND_LAST_FRAME ((uint32_t)0x00000004U) +#define I2C_LAST_FRAME ((uint32_t)0x00000008U) +/** + * @} + */ + +/** @defgroup I2C_Interrupt_configuration_definition I2C Interrupt configuration definition + * @brief I2C Interrupt definition + * Elements values convention: 0xXXXXXXXX + * - XXXXXXXX : Interrupt control mask + * @{ + */ +#define I2C_IT_BUF I2C_CR2_ITBUFEN +#define I2C_IT_EVT I2C_CR2_ITEVTEN +#define I2C_IT_ERR I2C_CR2_ITERREN +/** + * @} + */ + +/** @defgroup I2C_Flag_definition I2C Flag definition + * @{ + */ +#define I2C_FLAG_OVR ((uint32_t)(1U << 16U | I2C_SR1_OVR)) +#define I2C_FLAG_AF ((uint32_t)(1U << 16U | I2C_SR1_AF)) +#define I2C_FLAG_ARLO ((uint32_t)(1U << 16U | I2C_SR1_ARLO)) +#define I2C_FLAG_BERR ((uint32_t)(1U << 16U | I2C_SR1_BERR)) +#define I2C_FLAG_TXE ((uint32_t)(1U << 16U | I2C_SR1_TXE)) +#define I2C_FLAG_RXNE ((uint32_t)(1U << 16U | I2C_SR1_RXNE)) +#define I2C_FLAG_STOPF ((uint32_t)(1U << 16U | I2C_SR1_STOPF)) +#define I2C_FLAG_ADD10 ((uint32_t)(1U << 16U | I2C_SR1_ADD10)) +#define I2C_FLAG_BTF ((uint32_t)(1U << 16U | I2C_SR1_BTF)) +#define I2C_FLAG_ADDR ((uint32_t)(1U << 16U | I2C_SR1_ADDR)) +#define I2C_FLAG_SB ((uint32_t)(1U << 16U | I2C_SR1_SB)) +#define I2C_FLAG_DUALF ((uint32_t)(2U << 16U | I2C_SR2_DUALF)) +#define I2C_FLAG_GENCALL ((uint32_t)(2U << 16U | I2C_SR2_GENCALL)) +#define I2C_FLAG_TRA ((uint32_t)(2U << 16U | I2C_SR2_TRA)) +#define I2C_FLAG_BUSY ((uint32_t)(2U << 16U | I2C_SR2_BUSY)) +#define I2C_FLAG_MSL ((uint32_t)(2U << 16U | I2C_SR2_MSL)) +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup I2C_Exported_Macros I2C Exported Macros + * @{ + */ + +/** @brief Reset I2C handle state. + * @param __HANDLE__ specifies the I2C Handle. + * @retval None + */ +#define __HAL_I2C_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_I2C_STATE_RESET) + +/** @brief Enable the specified I2C interrupt. + * @param __HANDLE__ specifies the I2C Handle. + * @param __INTERRUPT__: specifies the interrupt source to enable. + * This parameter can be one of the following values: + * @arg I2C_IT_BUF: Buffer interrupt enable + * @arg I2C_IT_EVT: Event interrupt enable + * @arg I2C_IT_ERR: Error interrupt enable + * @retval None + */ +#define __HAL_I2C_ENABLE_IT(__HANDLE__, __INTERRUPT__) SET_BIT((__HANDLE__)->Instance->CR2,(__INTERRUPT__)) + +/** @brief Disable the specified I2C interrupt. + * @param __HANDLE__ specifies the I2C Handle. + * @param __INTERRUPT__: specifies the interrupt source to disable. + * This parameter can be one of the following values: + * @arg I2C_IT_BUF: Buffer interrupt enable + * @arg I2C_IT_EVT: Event interrupt enable + * @arg I2C_IT_ERR: Error interrupt enable + * + * @retval None + */ +#define __HAL_I2C_DISABLE_IT(__HANDLE__, __INTERRUPT__) CLEAR_BIT((__HANDLE__)->Instance->CR2, (__INTERRUPT__)) + +/** @brief Check whether the specified I2C interrupt source is enabled or not. + * @param __HANDLE__ specifies the I2C Handle. + * @param __INTERRUPT__: specifies the I2C interrupt source to check. + * This parameter can be one of the following values: + * @arg I2C_IT_BUF: Buffer interrupt enable + * @arg I2C_IT_EVT: Event interrupt enable + * @arg I2C_IT_ERR: Error interrupt enable + * @retval The new state of __INTERRUPT__ (TRUE or FALSE). + */ +#define __HAL_I2C_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR2 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) + +/** @brief Check whether the specified I2C flag is set or not. + * @param __HANDLE__ specifies the I2C Handle. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg I2C_FLAG_OVR: Overrun/Underrun flag + * @arg I2C_FLAG_AF: Acknowledge failure flag + * @arg I2C_FLAG_ARLO: Arbitration lost flag + * @arg I2C_FLAG_BERR: Bus error flag + * @arg I2C_FLAG_TXE: Data register empty flag + * @arg I2C_FLAG_RXNE: Data register not empty flag + * @arg I2C_FLAG_STOPF: Stop detection flag + * @arg I2C_FLAG_ADD10: 10-bit header sent flag + * @arg I2C_FLAG_BTF: Byte transfer finished flag + * @arg I2C_FLAG_ADDR: Address sent flag + * Address matched flag + * @arg I2C_FLAG_SB: Start bit flag + * @arg I2C_FLAG_DUALF: Dual flag + * @arg I2C_FLAG_GENCALL: General call header flag + * @arg I2C_FLAG_TRA: Transmitter/Receiver flag + * @arg I2C_FLAG_BUSY: Bus busy flag + * @arg I2C_FLAG_MSL: Master/Slave flag + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_I2C_GET_FLAG(__HANDLE__, __FLAG__) ((((uint8_t)((__FLAG__) >> 16U)) == 0x01U)?(((((__HANDLE__)->Instance->SR1) & ((__FLAG__) & I2C_FLAG_MASK)) == ((__FLAG__) & I2C_FLAG_MASK)) ? SET : RESET): \ + (((((__HANDLE__)->Instance->SR2) & ((__FLAG__) & I2C_FLAG_MASK)) == ((__FLAG__) & I2C_FLAG_MASK)) ? SET : RESET)) + +/** @brief Clear the I2C pending flags which are cleared by writing 0 in a specific bit. + * @param __HANDLE__ specifies the I2C Handle. + * @param __FLAG__ specifies the flag to clear. + * This parameter can be any combination of the following values: + * @arg I2C_FLAG_OVR: Overrun/Underrun flag (Slave mode) + * @arg I2C_FLAG_AF: Acknowledge failure flag + * @arg I2C_FLAG_ARLO: Arbitration lost flag (Master mode) + * @arg I2C_FLAG_BERR: Bus error flag + * @retval None + */ +#define __HAL_I2C_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR1 = ~((__FLAG__) & I2C_FLAG_MASK)) + +/** @brief Clears the I2C ADDR pending flag. + * @param __HANDLE__: specifies the I2C Handle. + * @retval None + */ +#define __HAL_I2C_CLEAR_ADDRFLAG(__HANDLE__) \ + do{ \ + __IO uint32_t tmpreg = 0x00U; \ + tmpreg = (__HANDLE__)->Instance->SR1; \ + tmpreg = (__HANDLE__)->Instance->SR2; \ + UNUSED(tmpreg); \ + }while(0) + +/** @brief Clears the I2C STOPF pending flag. + * @param __HANDLE__: specifies the I2C Handle. + * @retval None + */ +#define __HAL_I2C_CLEAR_STOPFLAG(__HANDLE__) \ + do{ \ + __IO uint32_t tmpreg = 0x00U; \ + tmpreg = (__HANDLE__)->Instance->SR1; \ + SET_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE); \ + UNUSED(tmpreg); \ + }while(0) + +/** @brief Enable the I2C peripheral. + * @param __HANDLE__: specifies the I2C Handle. + * This parameter can be I2Cx where x: 1 or 2 to select the I2C peripheral. + * @retval None + */ +#define __HAL_I2C_ENABLE(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE) + +/** @brief Disable the I2C peripheral. + * @param __HANDLE__: specifies the I2C Handle. + * This parameter can be I2Cx where x: 1 or 2 to select the I2C peripheral. + * @retval None + */ +#define __HAL_I2C_DISABLE(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE) + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup I2C_Exported_Functions + * @{ + */ + +/** @addtogroup I2C_Exported_Functions_Group1 + * @{ + */ +/* Initialization and de-initialization functions******************************/ +HAL_StatusTypeDef HAL_I2C_Init(I2C_HandleTypeDef *hi2c); +HAL_StatusTypeDef HAL_I2C_DeInit (I2C_HandleTypeDef *hi2c); +void HAL_I2C_MspInit(I2C_HandleTypeDef *hi2c); +void HAL_I2C_MspDeInit(I2C_HandleTypeDef *hi2c); + +/** + * @} + */ + +/** @addtogroup I2C_Exported_Functions_Group2 + * @{ + */ +/* IO operation functions ****************************************************/ +/******* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_I2C_Master_Transmit(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_I2C_Slave_Transmit(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_I2C_Slave_Receive(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_I2C_Mem_Write(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_I2C_IsDeviceReady(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Trials, uint32_t Timeout); + +/******* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_I2C_Master_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Master_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Slave_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Slave_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Mem_Write_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Mem_Read_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size); + +HAL_StatusTypeDef HAL_I2C_Master_Sequential_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions); +HAL_StatusTypeDef HAL_I2C_Master_Sequential_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions); +HAL_StatusTypeDef HAL_I2C_Slave_Sequential_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions); +HAL_StatusTypeDef HAL_I2C_Slave_Sequential_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions); +HAL_StatusTypeDef HAL_I2C_Master_Abort_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress); +HAL_StatusTypeDef HAL_I2C_EnableListen_IT(I2C_HandleTypeDef *hi2c); +HAL_StatusTypeDef HAL_I2C_DisableListen_IT(I2C_HandleTypeDef *hi2c); + +/******* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_I2C_Master_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Master_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Slave_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Slave_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Mem_Write_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Mem_Read_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size); +/** + * @} + */ + +/** @addtogroup I2C_IRQ_Handler_and_Callbacks IRQ Handler and Callbacks + * @{ + */ +/******* I2C IRQHandler and Callbacks used in non blocking modes (Interrupt and DMA) */ +void HAL_I2C_EV_IRQHandler(I2C_HandleTypeDef *hi2c); +void HAL_I2C_ER_IRQHandler(I2C_HandleTypeDef *hi2c); +void HAL_I2C_MasterTxCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_MasterRxCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_SlaveTxCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_SlaveRxCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_AddrCallback(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode); +void HAL_I2C_ListenCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_MemTxCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_MemRxCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_ErrorCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_AbortCpltCallback(I2C_HandleTypeDef *hi2c); +/** + * @} + */ + +/** @addtogroup I2C_Exported_Functions_Group3 + * @{ + */ +/* Peripheral State, Mode and Error functions *********************************/ +HAL_I2C_StateTypeDef HAL_I2C_GetState(I2C_HandleTypeDef *hi2c); +HAL_I2C_ModeTypeDef HAL_I2C_GetMode(I2C_HandleTypeDef *hi2c); +uint32_t HAL_I2C_GetError(I2C_HandleTypeDef *hi2c); + +/** + * @} + */ +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup I2C_Private_Constants I2C Private Constants + * @{ + */ +#define I2C_FLAG_MASK ((uint32_t)0x0000FFFFU) +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup I2C_Private_Macro I2C Private Macros + * @{ + */ + +#define IS_I2C_ADDRESSING_MODE(MODE) (((MODE) == I2C_ADDRESSINGMODE_7BIT) || \ + ((MODE) == I2C_ADDRESSINGMODE_10BIT)) + + +#define IS_I2C_DUAL_ADDRESS(ADDRESS) (((ADDRESS) == I2C_DUALADDRESS_DISABLE) || \ + ((ADDRESS) == I2C_DUALADDRESS_ENABLE)) + +#define IS_I2C_DUTY_CYCLE(CYCLE) (((CYCLE) == I2C_DUTYCYCLE_2) || \ + ((CYCLE) == I2C_DUTYCYCLE_16_9)) +#define IS_I2C_OWN_ADDRESS2(ADDRESS2) (((ADDRESS2) & (0xFFFFFF01U)) == 0U) +#define IS_I2C_OWN_ADDRESS1(ADDRESS1) (((ADDRESS1) & (0xFFFFFC00U)) == 0U) +#define IS_I2C_GENERAL_CALL(CALL) (((CALL) == I2C_GENERALCALL_DISABLE) || \ + ((CALL) == I2C_GENERALCALL_ENABLE)) + +#define IS_I2C_NO_STRETCH(STRETCH) (((STRETCH) == I2C_NOSTRETCH_DISABLE) || \ + ((STRETCH) == I2C_NOSTRETCH_ENABLE)) + +#define IS_I2C_MEMADD_SIZE(SIZE) (((SIZE) == I2C_MEMADD_SIZE_8BIT) || \ + ((SIZE) == I2C_MEMADD_SIZE_16BIT)) + +#define IS_I2C_CLOCK_SPEED(SPEED) (((SPEED) > 0U) && ((SPEED) <= 400000U)) + + +#define I2C_MEM_ADD_MSB(__ADDRESS__) ((uint8_t)((uint16_t)(((uint16_t)((__ADDRESS__) & (uint16_t)(0xFF00U))) >> 8U))) +#define I2C_MEM_ADD_LSB(__ADDRESS__) ((uint8_t)((uint16_t)((__ADDRESS__) & (uint16_t)(0x00FFU)))) + + +#define I2C_FREQ_RANGE(__PCLK__) ((__PCLK__)/1000000U) +#define I2C_RISE_TIME(__FREQRANGE__, __SPEED__) (((__SPEED__) <= 100000U) ? ((__FREQRANGE__) + 1U) : ((((__FREQRANGE__) * 300U) / 1000U) + 1U)) +#define I2C_SPEED_STANDARD(__PCLK__, __SPEED__) (((((__PCLK__)/((__SPEED__) << 1U)) & I2C_CCR_CCR) < 4U)? 4U:((__PCLK__) / ((__SPEED__) << 1U))) +#define I2C_SPEED_FAST(__PCLK__, __SPEED__, __DUTYCYCLE__) (((__DUTYCYCLE__) == I2C_DUTYCYCLE_2)? ((__PCLK__) / ((__SPEED__) * 3U)) : (((__PCLK__) / ((__SPEED__) * 25U)) | I2C_DUTYCYCLE_16_9)) +#define I2C_SPEED(__PCLK__, __SPEED__, __DUTYCYCLE__) (((__SPEED__) <= 100000U)? (I2C_SPEED_STANDARD((__PCLK__), (__SPEED__))) : \ + ((I2C_SPEED_FAST((__PCLK__), (__SPEED__), (__DUTYCYCLE__)) & I2C_CCR_CCR) == 0U)? 1U : \ + ((I2C_SPEED_FAST((__PCLK__), (__SPEED__), (__DUTYCYCLE__))) | I2C_CCR_FS)) + +#define I2C_7BIT_ADD_WRITE(__ADDRESS__) ((uint8_t)((__ADDRESS__) & (~I2C_OAR1_ADD0))) +#define I2C_7BIT_ADD_READ(__ADDRESS__) ((uint8_t)((__ADDRESS__) | I2C_OAR1_ADD0)) + +#define I2C_10BIT_ADDRESS(__ADDRESS__) ((uint8_t)((uint16_t)((__ADDRESS__) & (uint16_t)(0x00FFU)))) +#define I2C_10BIT_HEADER_WRITE(__ADDRESS__) ((uint8_t)((uint16_t)((uint16_t)(((uint16_t)((__ADDRESS__) & (uint16_t)(0x0300U))) >> 7U) | (uint16_t)(0xF0U)))) +#define I2C_10BIT_HEADER_READ(__ADDRESS__) ((uint8_t)((uint16_t)((uint16_t)(((uint16_t)((__ADDRESS__) & (uint16_t)(0x0300U))) >> 7U) | (uint16_t)(0xF1U)))) + +#define IS_I2C_TRANSFER_OPTIONS_REQUEST(REQUEST) (((REQUEST) == I2C_FIRST_FRAME) || \ + ((REQUEST) == I2C_NEXT_FRAME) || \ + ((REQUEST) == I2C_FIRST_AND_LAST_FRAME) || \ + ((REQUEST) == I2C_LAST_FRAME)) +/** + * @} + */ + +/* Private Functions ---------------------------------------------------------*/ +/** @defgroup I2C_Private_Functions I2C Private Functions + * @{ + */ +/* Private functions are defined in stm32f0xx_hal_i2c.c file */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + + +#endif /* __STM32L1xx_HAL_I2C_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_i2s.h b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_i2s.h new file mode 100755 index 0000000..ee7af8e --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_i2s.h @@ -0,0 +1,450 @@ +/** + ****************************************************************************** + * @file stm32l1xx_hal_i2s.h + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief Header file of I2S HAL module. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L1xx_HAL_I2S_H +#define __STM32L1xx_HAL_I2S_H + +#ifdef __cplusplus + extern "C" { +#endif + +#if defined(STM32L100xC) || \ + defined(STM32L151xC) || defined(STM32L151xCA) || defined(STM32L151xD) || defined(STM32L151xE) || defined(STM32L151xDX) || \ + defined(STM32L152xC) || defined(STM32L152xCA) || defined(STM32L152xD) || defined(STM32L152xE) || defined(STM32L152xDX) || defined(STM32L151xE) || defined(STM32L151xDX) || \ + defined(STM32L162xC) || defined(STM32L162xCA) || defined(STM32L162xD) || defined(STM32L162xE) || defined(STM32L162xDX) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_hal_def.h" + +/** @addtogroup STM32L1xx_HAL_Driver + * @{ + */ + +/** @addtogroup I2S + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup I2S_Exported_Types I2S Exported Types + * @{ + */ + +/** + * @brief I2S Init structure definition + */ +typedef struct +{ + uint32_t Mode; /*!< Specifies the I2S operating mode. + This parameter can be a value of @ref I2S_Mode */ + + uint32_t Standard; /*!< Specifies the standard used for the I2S communication. + This parameter can be a value of @ref I2S_Standard */ + + uint32_t DataFormat; /*!< Specifies the data format for the I2S communication. + This parameter can be a value of @ref I2S_Data_Format */ + + uint32_t MCLKOutput; /*!< Specifies whether the I2S MCLK output is enabled or not. + This parameter can be a value of @ref I2S_MCLK_Output */ + + uint32_t AudioFreq; /*!< Specifies the frequency selected for the I2S communication. + This parameter can be a value of @ref I2S_Audio_Frequency */ + + uint32_t CPOL; /*!< Specifies the idle state of the I2S clock. + This parameter can be a value of @ref I2S_Clock_Polarity */ + +}I2S_InitTypeDef; + +/** + * @brief HAL State structures definition + */ +typedef enum +{ + HAL_I2S_STATE_RESET = 0x00, /*!< I2S not yet initialized or disabled */ + HAL_I2S_STATE_READY = 0x01, /*!< I2S initialized and ready for use */ + HAL_I2S_STATE_BUSY = 0x02, /*!< I2S internal process is ongoing */ + HAL_I2S_STATE_BUSY_TX = 0x12, /*!< Data Transmission process is ongoing */ + HAL_I2S_STATE_BUSY_RX = 0x22, /*!< Data Reception process is ongoing */ + HAL_I2S_STATE_TIMEOUT = 0x03, /*!< I2S pause state: used in case of DMA */ + HAL_I2S_STATE_ERROR = 0x04 /*!< I2S error state */ +}HAL_I2S_StateTypeDef; + +/** + * @brief I2S handle Structure definition + */ +typedef struct +{ + SPI_TypeDef *Instance; /* I2S registers base address */ + + I2S_InitTypeDef Init; /* I2S communication parameters */ + + uint16_t *pTxBuffPtr; /* Pointer to I2S Tx transfer buffer */ + + __IO uint16_t TxXferSize; /* I2S Tx transfer size */ + + __IO uint16_t TxXferCount; /* I2S Tx transfer Counter */ + + uint16_t *pRxBuffPtr; /* Pointer to I2S Rx transfer buffer */ + + __IO uint16_t RxXferSize; /* I2S Rx transfer size */ + + __IO uint16_t RxXferCount; /* I2S Rx transfer counter + (This field is initialized at the + same value as transfer size at the + beginning of the transfer and + decremented when a sample is received. + NbSamplesReceived = RxBufferSize-RxBufferCount) */ + + DMA_HandleTypeDef *hdmatx; /* I2S Tx DMA handle parameters */ + + DMA_HandleTypeDef *hdmarx; /* I2S Rx DMA handle parameters */ + + __IO HAL_LockTypeDef Lock; /* I2S locking object */ + + __IO HAL_I2S_StateTypeDef State; /* I2S communication state */ + + __IO uint32_t ErrorCode; /* I2S Error code */ + +}I2S_HandleTypeDef; +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup I2S_Exported_Constants I2S Exported Constants + * @{ + */ + +/** @defgroup I2S_Error_Codes I2S Error Codes + * @{ + */ + +#define HAL_I2S_ERROR_NONE ((uint32_t)0x00) /*!< No error */ +#define HAL_I2S_ERROR_UDR ((uint32_t)0x01) /*!< I2S Underrun error */ +#define HAL_I2S_ERROR_OVR ((uint32_t)0x02) /*!< I2S Overrun error */ +#define HAL_I2S_ERROR_FRE ((uint32_t)0x04) /*!< I2S Frame format error */ +#define HAL_I2S_ERROR_DMA ((uint32_t)0x08) /*!< DMA transfer error */ + +/** + * @} + */ + +/** @defgroup I2S_Mode I2S Mode + * @{ + */ +#define I2S_MODE_SLAVE_TX ((uint32_t)0x00000000) +#define I2S_MODE_SLAVE_RX ((uint32_t)0x00000100) +#define I2S_MODE_MASTER_TX ((uint32_t)0x00000200) +#define I2S_MODE_MASTER_RX ((uint32_t)0x00000300) + +#define IS_I2S_MODE(MODE) (((MODE) == I2S_MODE_SLAVE_TX) || \ + ((MODE) == I2S_MODE_SLAVE_RX) || \ + ((MODE) == I2S_MODE_MASTER_TX) || \ + ((MODE) == I2S_MODE_MASTER_RX)) +/** + * @} + */ + +/** @defgroup I2S_Standard I2S Standard + * @{ + */ +#define I2S_STANDARD_PHILIPS ((uint32_t)0x00000000) +#define I2S_STANDARD_MSB ((uint32_t) SPI_I2SCFGR_I2SSTD_0) +#define I2S_STANDARD_LSB ((uint32_t) SPI_I2SCFGR_I2SSTD_1) +#define I2S_STANDARD_PCM_SHORT ((uint32_t)(SPI_I2SCFGR_I2SSTD_0 |\ + SPI_I2SCFGR_I2SSTD_1)) +#define I2S_STANDARD_PCM_LONG ((uint32_t)(SPI_I2SCFGR_I2SSTD_0 |\ + SPI_I2SCFGR_I2SSTD_1 |\ + SPI_I2SCFGR_PCMSYNC)) + +#define IS_I2S_STANDARD(STANDARD) (((STANDARD) == I2S_STANDARD_PHILIPS) || \ + ((STANDARD) == I2S_STANDARD_MSB) || \ + ((STANDARD) == I2S_STANDARD_LSB) || \ + ((STANDARD) == I2S_STANDARD_PCM_SHORT) || \ + ((STANDARD) == I2S_STANDARD_PCM_LONG)) + +/** + * @} + */ + +/** @defgroup I2S_Data_Format I2S Data Format + * @{ + */ +#define I2S_DATAFORMAT_16B ((uint32_t)0x00000000) +#define I2S_DATAFORMAT_16B_EXTENDED ((uint32_t) SPI_I2SCFGR_CHLEN) +#define I2S_DATAFORMAT_24B ((uint32_t)(SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN_0)) +#define I2S_DATAFORMAT_32B ((uint32_t)(SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN_1)) + +#define IS_I2S_DATA_FORMAT(FORMAT) (((FORMAT) == I2S_DATAFORMAT_16B) || \ + ((FORMAT) == I2S_DATAFORMAT_16B_EXTENDED) || \ + ((FORMAT) == I2S_DATAFORMAT_24B) || \ + ((FORMAT) == I2S_DATAFORMAT_32B)) +/** + * @} + */ + +/** @defgroup I2S_MCLK_Output I2S MCLK Output + * @{ + */ +#define I2S_MCLKOUTPUT_ENABLE ((uint32_t)SPI_I2SPR_MCKOE) +#define I2S_MCLKOUTPUT_DISABLE ((uint32_t)0x00000000) + +#define IS_I2S_MCLK_OUTPUT(OUTPUT) (((OUTPUT) == I2S_MCLKOUTPUT_ENABLE) || \ + ((OUTPUT) == I2S_MCLKOUTPUT_DISABLE)) +/** + * @} + */ + +/** @defgroup I2S_Audio_Frequency I2S Audio Frequency + * @{ + */ +#define I2S_AUDIOFREQ_192K ((uint32_t)192000) +#define I2S_AUDIOFREQ_96K ((uint32_t)96000) +#define I2S_AUDIOFREQ_48K ((uint32_t)48000) +#define I2S_AUDIOFREQ_44K ((uint32_t)44100) +#define I2S_AUDIOFREQ_32K ((uint32_t)32000) +#define I2S_AUDIOFREQ_22K ((uint32_t)22050) +#define I2S_AUDIOFREQ_16K ((uint32_t)16000) +#define I2S_AUDIOFREQ_11K ((uint32_t)11025) +#define I2S_AUDIOFREQ_8K ((uint32_t)8000) +#define I2S_AUDIOFREQ_DEFAULT ((uint32_t)2) + +#define IS_I2S_AUDIO_FREQ(FREQ) ((((FREQ) >= I2S_AUDIOFREQ_8K) && \ + ((FREQ) <= I2S_AUDIOFREQ_192K)) || \ + ((FREQ) == I2S_AUDIOFREQ_DEFAULT)) +/** + * @} + */ + +/** @defgroup I2S_Clock_Polarity I2S Clock Polarity + * @{ + */ +#define I2S_CPOL_LOW ((uint32_t)0x00000000) +#define I2S_CPOL_HIGH ((uint32_t)SPI_I2SCFGR_CKPOL) + +#define IS_I2S_CPOL(CPOL) (((CPOL) == I2S_CPOL_LOW) || \ + ((CPOL) == I2S_CPOL_HIGH)) +/** + * @} + */ + +/** @defgroup I2S_Interrupt_configuration_definition I2S Interrupt configuration definition + * @{ + */ +#define I2S_IT_TXE SPI_CR2_TXEIE +#define I2S_IT_RXNE SPI_CR2_RXNEIE +#define I2S_IT_ERR SPI_CR2_ERRIE +/** + * @} + */ + +/** @defgroup I2S_Flag_definition I2S Flag definition + * @{ + */ +#define I2S_FLAG_TXE SPI_SR_TXE +#define I2S_FLAG_RXNE SPI_SR_RXNE + +#define I2S_FLAG_UDR SPI_SR_UDR +#define I2S_FLAG_OVR SPI_SR_OVR +#define I2S_FLAG_FRE SPI_SR_FRE + +#define I2S_FLAG_CHSIDE SPI_SR_CHSIDE +#define I2S_FLAG_BSY SPI_SR_BSY +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup I2S_Exported_macros I2S Exported Macros + * @{ + */ + +/** @brief Reset I2S handle state + * @param __HANDLE__: specifies the I2S Handle. + * @retval None + */ +#define __HAL_I2S_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_I2S_STATE_RESET) + +/** @brief Enable or disable the specified SPI peripheral (in I2S mode). + * @param __HANDLE__: specifies the I2S Handle. + * @retval None + */ +#define __HAL_I2S_ENABLE(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->I2SCFGR, SPI_I2SCFGR_I2SE)) +#define __HAL_I2S_DISABLE(__HANDLE__) (CLEAR_BIT((__HANDLE__)->Instance->I2SCFGR, SPI_I2SCFGR_I2SE)) + +/** @brief Enable or disable the specified I2S interrupts. + * @param __HANDLE__: specifies the I2S Handle. + * @param __INTERRUPT__: specifies the interrupt source to enable or disable. + * This parameter can be one of the following values: + * @arg I2S_IT_TXE: Tx buffer empty interrupt enable + * @arg I2S_IT_RXNE: RX buffer not empty interrupt enable + * @arg I2S_IT_ERR: Error interrupt enable + * @retval None + */ +#define __HAL_I2S_ENABLE_IT(__HANDLE__, __INTERRUPT__) (SET_BIT((__HANDLE__)->Instance->CR2,(__INTERRUPT__))) +#define __HAL_I2S_DISABLE_IT(__HANDLE__, __INTERRUPT__) (CLEAR_BIT((__HANDLE__)->Instance->CR2,(__INTERRUPT__))) + +/** @brief Checks if the specified I2S interrupt source is enabled or disabled. + * @param __HANDLE__: specifies the I2S Handle. + * This parameter can be I2S where x: 1, 2, or 3 to select the I2S peripheral. + * @param __INTERRUPT__: specifies the I2S interrupt source to check. + * This parameter can be one of the following values: + * @arg I2S_IT_TXE: Tx buffer empty interrupt enable + * @arg I2S_IT_RXNE: RX buffer not empty interrupt enable + * @arg I2S_IT_ERR: Error interrupt enable + * @retval The new state of __IT__ (TRUE or FALSE). + */ +#define __HAL_I2S_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR2 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) + +/** @brief Checks whether the specified I2S flag is set or not. + * @param __HANDLE__: specifies the I2S Handle. + * @param __FLAG__: specifies the flag to check. + * This parameter can be one of the following values: + * @arg I2S_FLAG_RXNE: Receive buffer not empty flag + * @arg I2S_FLAG_TXE: Transmit buffer empty flag + * @arg I2S_FLAG_UDR: Underrun flag + * @arg I2S_FLAG_OVR: Overrun flag + * @arg I2S_FLAG_FRE: Frame error flag + * @arg I2S_FLAG_CHSIDE: Channel Side flag + * @arg I2S_FLAG_BSY: Busy flag + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_I2S_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__)) + +/** @brief Clears the I2S OVR pending flag. + * @param __HANDLE__: specifies the I2S Handle. + * @retval None + */ +#define __HAL_I2S_CLEAR_OVRFLAG(__HANDLE__) do{__IO uint32_t tmpreg = (__HANDLE__)->Instance->DR;\ + tmpreg = (__HANDLE__)->Instance->SR;\ + UNUSED(tmpreg); \ + }while(0) +/** @brief Clears the I2S UDR pending flag. + * @param __HANDLE__: specifies the I2S Handle. + * @retval None + */ +#define __HAL_I2S_CLEAR_UDRFLAG(__HANDLE__)((__HANDLE__)->Instance->SR) +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup I2S_Exported_Functions + * @{ + */ + +/** @addtogroup I2S_Exported_Functions_Group1 + * @{ + */ +/* Initialization/de-initialization functions ********************************/ +HAL_StatusTypeDef HAL_I2S_Init(I2S_HandleTypeDef *hi2s); +HAL_StatusTypeDef HAL_I2S_DeInit (I2S_HandleTypeDef *hi2s); +void HAL_I2S_MspInit(I2S_HandleTypeDef *hi2s); +void HAL_I2S_MspDeInit(I2S_HandleTypeDef *hi2s); +/** + * @} + */ + +/** @addtogroup I2S_Exported_Functions_Group2 + * @{ + */ +/* I/O operation functions ***************************************************/ + /* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_I2S_Transmit(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_I2S_Receive(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout); + + /* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_I2S_Transmit_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2S_Receive_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size); +void HAL_I2S_IRQHandler(I2S_HandleTypeDef *hi2s); + +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_I2S_Transmit_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2S_Receive_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size); + +HAL_StatusTypeDef HAL_I2S_DMAPause(I2S_HandleTypeDef *hi2s); +HAL_StatusTypeDef HAL_I2S_DMAResume(I2S_HandleTypeDef *hi2s); +HAL_StatusTypeDef HAL_I2S_DMAStop(I2S_HandleTypeDef *hi2s); + +/* Callbacks used in non blocking modes (Interrupt and DMA) *******************/ +void HAL_I2S_TxHalfCpltCallback(I2S_HandleTypeDef *hi2s); +void HAL_I2S_TxCpltCallback(I2S_HandleTypeDef *hi2s); +void HAL_I2S_RxHalfCpltCallback(I2S_HandleTypeDef *hi2s); +void HAL_I2S_RxCpltCallback(I2S_HandleTypeDef *hi2s); +void HAL_I2S_ErrorCallback(I2S_HandleTypeDef *hi2s); +/** + * @} + */ + +/** @addtogroup I2S_Exported_Functions_Group3 + * @{ + */ +/* Peripheral Control and State functions ************************************/ +HAL_I2S_StateTypeDef HAL_I2S_GetState(I2S_HandleTypeDef *hi2s); +uint32_t HAL_I2S_GetError(I2S_HandleTypeDef *hi2s); +/** + * @} + */ + +/** + * @} + */ + + +/** + * @} + */ + +/** + * @} + */ +#endif /* STM32L100xC || + STM32L151xC || STM32L151xCA || STM32L151xD || STM32L151xE || STM32L151xDX ||\\ + STM32L152xC || STM32L152xCA || STM32L152xD || STM32L152xE || STM32L152xDX || STM32L151xE || STM32L151xDX ||\\ + STM32L162xC || STM32L162xCA || STM32L162xD || STM32L162xE || STM32L162xDX */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32L1xx_HAL_I2S_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_irda.h b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_irda.h new file mode 100755 index 0000000..9ad091b --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_irda.h @@ -0,0 +1,579 @@ +/** + ****************************************************************************** + * @file stm32l1xx_hal_irda.h + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief This file contains all the functions prototypes for the IRDA + * firmware library. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L1xx_HAL_IRDA_H +#define __STM32L1xx_HAL_IRDA_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_hal_def.h" + +/** @addtogroup STM32L1xx_HAL_Driver + * @{ + */ + +/** @addtogroup IRDA + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup IRDA_Exported_Types IRDA Exported Types + * @{ + */ + +/** + * @brief IRDA Init Structure definition + */ +typedef struct +{ + uint32_t BaudRate; /*!< This member configures the IRDA communication baud rate. + The baud rate is computed using the following formula: + - IntegerDivider = ((PCLKx) / (16 * (hirda->Init.BaudRate))) + - FractionalDivider = ((IntegerDivider - ((uint32_t) IntegerDivider)) * 16) + 0.5 */ + + uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame. + This parameter can be a value of @ref IRDA_Word_Length */ + + + uint32_t Parity; /*!< Specifies the parity mode. + This parameter can be a value of @ref IRDA_Parity + @note When parity is enabled, the computed parity is inserted + at the MSB position of the transmitted data (9th bit when + the word length is set to 9 data bits; 8th bit when the + word length is set to 8 data bits). */ + + uint32_t Mode; /*!< Specifies wether the Receive or Transmit mode is enabled or disabled. + This parameter can be a value of @ref IRDA_Transfer_Mode */ + + uint8_t Prescaler; /*!< Specifies the Prescaler value prescaler value to be programmed + in the IrDA low-power Baud Register, for defining pulse width on which + burst acceptance/rejection will be decided. This value is used as divisor + of system clock to achieve required pulse width. */ + + uint32_t IrDAMode; /*!< Specifies the IrDA mode + This parameter can be a value of @ref IRDA_Low_Power */ +}IRDA_InitTypeDef; + +/** + * @brief HAL IRDA State structures definition + */ +typedef enum +{ + HAL_IRDA_STATE_RESET = 0x00, /*!< Peripheral is not initialized */ + HAL_IRDA_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */ + HAL_IRDA_STATE_BUSY = 0x02, /*!< an internal process is ongoing */ + HAL_IRDA_STATE_BUSY_TX = 0x12, /*!< Data Transmission process is ongoing */ + HAL_IRDA_STATE_BUSY_RX = 0x22, /*!< Data Reception process is ongoing */ + HAL_IRDA_STATE_BUSY_TX_RX = 0x32, /*!< Data Transmission and Reception process is ongoing */ + HAL_IRDA_STATE_TIMEOUT = 0x03, /*!< Timeout state */ + HAL_IRDA_STATE_ERROR = 0x04 /*!< Error */ +}HAL_IRDA_StateTypeDef; + + +/** + * @brief IRDA handle Structure definition + */ +typedef struct +{ + USART_TypeDef *Instance; /*!< USART registers base address */ + + IRDA_InitTypeDef Init; /*!< IRDA communication parameters */ + + uint8_t *pTxBuffPtr; /*!< Pointer to IRDA Tx transfer Buffer */ + + uint16_t TxXferSize; /*!< IRDA Tx Transfer size */ + + uint16_t TxXferCount; /*!< IRDA Tx Transfer Counter */ + + uint8_t *pRxBuffPtr; /*!< Pointer to IRDA Rx transfer Buffer */ + + uint16_t RxXferSize; /*!< IRDA Rx Transfer size */ + + uint16_t RxXferCount; /*!< IRDA Rx Transfer Counter */ + + DMA_HandleTypeDef *hdmatx; /*!< IRDA Tx DMA Handle parameters */ + + DMA_HandleTypeDef *hdmarx; /*!< IRDA Rx DMA Handle parameters */ + + HAL_LockTypeDef Lock; /*!< Locking object */ + + __IO HAL_IRDA_StateTypeDef State; /*!< IRDA communication state */ + + __IO uint32_t ErrorCode; /*!< IRDA Error code */ + +}IRDA_HandleTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup IRDA_Exported_Constants IRDA Exported constants + * @{ + */ + +/** @defgroup IRDA_Error_Codes IRDA Error Codes + * @{ + */ +#define HAL_IRDA_ERROR_NONE ((uint32_t)0x00) /*!< No error */ +#define HAL_IRDA_ERROR_PE ((uint32_t)0x01) /*!< Parity error */ +#define HAL_IRDA_ERROR_NE ((uint32_t)0x02) /*!< Noise error */ +#define HAL_IRDA_ERROR_FE ((uint32_t)0x04) /*!< frame error */ +#define HAL_IRDA_ERROR_ORE ((uint32_t)0x08) /*!< Overrun error */ +#define HAL_IRDA_ERROR_DMA ((uint32_t)0x10) /*!< DMA transfer error */ + +/** + * @} + */ + + +/** @defgroup IRDA_Word_Length IRDA Word Length + * @{ + */ +#define IRDA_WORDLENGTH_8B ((uint32_t)0x00000000) +#define IRDA_WORDLENGTH_9B ((uint32_t)USART_CR1_M) +/** + * @} + */ + +/** @defgroup IRDA_Parity IRDA Parity + * @{ + */ +#define IRDA_PARITY_NONE ((uint32_t)0x00000000) +#define IRDA_PARITY_EVEN ((uint32_t)USART_CR1_PCE) +#define IRDA_PARITY_ODD ((uint32_t)(USART_CR1_PCE | USART_CR1_PS)) +/** + * @} + */ + +/** @defgroup IRDA_Transfer_Mode IRDA Transfer Mode + * @{ + */ +#define IRDA_MODE_RX ((uint32_t)USART_CR1_RE) +#define IRDA_MODE_TX ((uint32_t)USART_CR1_TE) +#define IRDA_MODE_TX_RX ((uint32_t)(USART_CR1_TE |USART_CR1_RE)) +/** + * @} + */ + +/** @defgroup IRDA_Low_Power IRDA Low Power + * @{ + */ +#define IRDA_POWERMODE_LOWPOWER ((uint32_t)USART_CR3_IRLP) +#define IRDA_POWERMODE_NORMAL ((uint32_t)0x00000000) +/** + * @} + */ + +/** @defgroup IRDA_One_Bit IRDA One Bit Sampling + * @{ + */ +#define IRDA_ONE_BIT_SAMPLE_DISABLE ((uint32_t)0x00000000) +#define IRDA_ONE_BIT_SAMPLE_ENABLE ((uint32_t)USART_CR3_ONEBIT) +/** + * @} + */ + +/** @defgroup IRDA_Flags IRDA Flags + * Elements values convention: 0xXXXX + * - 0xXXXX : Flag mask in the SR register + * @{ + */ +#define IRDA_FLAG_TXE ((uint32_t)USART_SR_TXE) +#define IRDA_FLAG_TC ((uint32_t)USART_SR_TC) +#define IRDA_FLAG_RXNE ((uint32_t)USART_SR_RXNE) +#define IRDA_FLAG_IDLE ((uint32_t)USART_SR_IDLE) +#define IRDA_FLAG_ORE ((uint32_t)USART_SR_ORE) +#define IRDA_FLAG_NE ((uint32_t)USART_SR_NE) +#define IRDA_FLAG_FE ((uint32_t)USART_SR_FE) +#define IRDA_FLAG_PE ((uint32_t)USART_SR_PE) +/** + * @} + */ + +/** @defgroup IRDA_Interrupt_definition IRDA Interrupt Definitions + * Elements values convention: 0xY000XXXX + * - XXXX : Interrupt mask (16 bits) in the Y register + * - Y : Interrupt source register (4 bits) + * - 0001: CR1 register + * - 0010: CR2 register + * - 0011: CR3 register + * + * @{ + */ + +#define IRDA_IT_PE ((uint32_t)(IRDA_CR1_REG_INDEX << 28 | USART_CR1_PEIE)) +#define IRDA_IT_TXE ((uint32_t)(IRDA_CR1_REG_INDEX << 28 | USART_CR1_TXEIE)) +#define IRDA_IT_TC ((uint32_t)(IRDA_CR1_REG_INDEX << 28 | USART_CR1_TCIE)) +#define IRDA_IT_RXNE ((uint32_t)(IRDA_CR1_REG_INDEX << 28 | USART_CR1_RXNEIE)) +#define IRDA_IT_IDLE ((uint32_t)(IRDA_CR1_REG_INDEX << 28 | USART_CR1_IDLEIE)) + +#define IRDA_IT_LBD ((uint32_t)(IRDA_CR2_REG_INDEX << 28 | USART_CR2_LBDIE)) + +#define IRDA_IT_CTS ((uint32_t)(IRDA_CR3_REG_INDEX << 28 | USART_CR3_CTSIE)) +#define IRDA_IT_ERR ((uint32_t)(IRDA_CR3_REG_INDEX << 28 | USART_CR3_EIE)) + +/** + * @} + */ + +/** + * @} + */ + + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup IRDA_Exported_Macros IRDA Exported Macros + * @{ + */ + +/** @brief Reset IRDA handle state + * @param __HANDLE__: specifies the IRDA Handle. + * IRDA Handle selects the USARTx or UARTy peripheral + * (USART,UART availability and x,y values depending on device). + * @retval None + */ +#define __HAL_IRDA_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_IRDA_STATE_RESET) + +/** @brief Flush the IRDA DR register + * @param __HANDLE__: specifies the USART Handle. + * IRDA Handle selects the USARTx or UARTy peripheral + * (USART,UART availability and x,y values depending on device). + */ +#define __HAL_IRDA_FLUSH_DRREGISTER(__HANDLE__) ((__HANDLE__)->Instance->DR) + +/** @brief Check whether the specified IRDA flag is set or not. + * @param __HANDLE__: specifies the IRDA Handle. + * IRDA Handle selects the USARTx or UARTy peripheral + * (USART,UART availability and x,y values depending on device). + * @param __FLAG__: specifies the flag to check. + * This parameter can be one of the following values: + * @arg IRDA_FLAG_TXE: Transmit data register empty flag + * @arg IRDA_FLAG_TC: Transmission Complete flag + * @arg IRDA_FLAG_RXNE: Receive data register not empty flag + * @arg IRDA_FLAG_IDLE: Idle Line detection flag + * @arg IRDA_FLAG_ORE: OverRun Error flag + * @arg IRDA_FLAG_NE: Noise Error flag + * @arg IRDA_FLAG_FE: Framing Error flag + * @arg IRDA_FLAG_PE: Parity Error flag + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_IRDA_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__)) + +/** @brief Clear the specified IRDA pending flag. + * @param __HANDLE__: specifies the IRDA Handle. + * IRDA Handle selects the USARTx or UARTy peripheral + * (USART,UART availability and x,y values depending on device). + * @param __FLAG__: specifies the flag to check. + * This parameter can be any combination of the following values: + * @arg IRDA_FLAG_TC: Transmission Complete flag. + * @arg IRDA_FLAG_RXNE: Receive data register not empty flag. + * + * @note PE (Parity error), FE (Framing error), NE (Noise error), ORE (OverRun + * error) and IDLE (Idle line detected) flags are cleared by software + * sequence: a read operation to USART_SR register followed by a read + * operation to USART_DR register. + * @note RXNE flag can be also cleared by a read to the USART_DR register. + * @note TC flag can be also cleared by software sequence: a read operation to + * USART_SR register followed by a write operation to USART_DR register. + * @note TXE flag is cleared only by a write to the USART_DR register. + * + * @retval None + */ +#define __HAL_IRDA_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__)) + +/** @brief Clear the IRDA PE pending flag. + * @param __HANDLE__: specifies the IRDA Handle. + * IRDA Handle selects the USARTx or UARTy peripheral + * (USART,UART availability and x,y values depending on device). + * @retval None + */ +#define __HAL_IRDA_CLEAR_PEFLAG(__HANDLE__) \ +do{ \ + __IO uint32_t tmpreg; \ + tmpreg = (__HANDLE__)->Instance->SR; \ + tmpreg = (__HANDLE__)->Instance->DR; \ + UNUSED(tmpreg); \ + }while(0) \ + +/** @brief Clear the IRDA FE pending flag. + * @param __HANDLE__: specifies the IRDA Handle. + * IRDA Handle selects the USARTx or UARTy peripheral + * (USART,UART availability and x,y values depending on device). + * @retval None + */ +#define __HAL_IRDA_CLEAR_FEFLAG(__HANDLE__) __HAL_IRDA_CLEAR_PEFLAG(__HANDLE__) + +/** @brief Clear the IRDA NE pending flag. + * @param __HANDLE__: specifies the IRDA Handle. + * IRDA Handle selects the USARTx or UARTy peripheral + * (USART,UART availability and x,y values depending on device). + * @retval None + */ +#define __HAL_IRDA_CLEAR_NEFLAG(__HANDLE__) __HAL_IRDA_CLEAR_PEFLAG(__HANDLE__) + +/** @brief Clear the IRDA ORE pending flag. + * @param __HANDLE__: specifies the IRDA Handle. + * IRDA Handle selects the USARTx or UARTy peripheral + * (USART,UART availability and x,y values depending on device). + * @retval None + */ +#define __HAL_IRDA_CLEAR_OREFLAG(__HANDLE__) __HAL_IRDA_CLEAR_PEFLAG(__HANDLE__) + +/** @brief Clear the IRDA IDLE pending flag. + * @param __HANDLE__: specifies the IRDA Handle. + * IRDA Handle selects the USARTx or UARTy peripheral + * (USART,UART availability and x,y values depending on device). + * @retval None + */ +#define __HAL_IRDA_CLEAR_IDLEFLAG(__HANDLE__) __HAL_IRDA_CLEAR_PEFLAG(__HANDLE__) + +/** @brief Enable the specified IRDA interrupt. + * @param __HANDLE__: specifies the IRDA Handle. + * IRDA Handle selects the USARTx or UARTy peripheral + * (USART,UART availability and x,y values depending on device). + * @param __INTERRUPT__: specifies the IRDA interrupt source to enable. + * This parameter can be one of the following values: + * @arg IRDA_IT_TXE: Transmit Data Register empty interrupt + * @arg IRDA_IT_TC: Transmission complete interrupt + * @arg IRDA_IT_RXNE: Receive Data register not empty interrupt + * @arg IRDA_IT_IDLE: Idle line detection interrupt + * @arg IRDA_IT_PE: Parity Error interrupt + * @arg IRDA_IT_ERR: Error interrupt(Frame error, noise error, overrun error) + * @retval None + */ +#define __HAL_IRDA_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28) == IRDA_CR1_REG_INDEX)? ((__HANDLE__)->Instance->CR1 |= ((__INTERRUPT__) & IRDA_IT_MASK)): \ + (((__INTERRUPT__) >> 28) == IRDA_CR2_REG_INDEX)? ((__HANDLE__)->Instance->CR2 |= ((__INTERRUPT__) & IRDA_IT_MASK)): \ + ((__HANDLE__)->Instance->CR3 |= ((__INTERRUPT__) & IRDA_IT_MASK))) + +/** @brief Disable the specified IRDA interrupt. + * @param __HANDLE__: specifies the IRDA Handle. + * IRDA Handle selects the USARTx or UARTy peripheral + * (USART,UART availability and x,y values depending on device). + * @param __INTERRUPT__: specifies the IRDA interrupt source to disable. + * This parameter can be one of the following values: + * @arg IRDA_IT_TXE: Transmit Data Register empty interrupt + * @arg IRDA_IT_TC: Transmission complete interrupt + * @arg IRDA_IT_RXNE: Receive Data register not empty interrupt + * @arg IRDA_IT_IDLE: Idle line detection interrupt + * @arg IRDA_IT_PE: Parity Error interrupt + * @arg IRDA_IT_ERR: Error interrupt(Frame error, noise error, overrun error) + * @retval None + */ +#define __HAL_IRDA_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28) == IRDA_CR1_REG_INDEX)? ((__HANDLE__)->Instance->CR1 &= ~((__INTERRUPT__) & IRDA_IT_MASK)): \ + (((__INTERRUPT__) >> 28) == IRDA_CR2_REG_INDEX)? ((__HANDLE__)->Instance->CR2 &= ~((__INTERRUPT__) & IRDA_IT_MASK)): \ + ((__HANDLE__)->Instance->CR3 &= ~ ((__INTERRUPT__) & IRDA_IT_MASK))) + +/** @brief Check whether the specified IRDA interrupt has occurred or not. + * @param __HANDLE__: specifies the IRDA Handle. + * IRDA Handle selects the USARTx or UARTy peripheral + * (USART,UART availability and x,y values depending on device). + * @param __IT__: specifies the IRDA interrupt source to check. + * This parameter can be one of the following values: + * @arg IRDA_IT_TXE: Transmit Data Register empty interrupt + * @arg IRDA_IT_TC: Transmission complete interrupt + * @arg IRDA_IT_RXNE: Receive Data register not empty interrupt + * @arg IRDA_IT_IDLE: Idle line detection interrupt + * @arg IRDA_IT_ERR: Error interrupt + * @arg IRDA_IT_PE: Parity Error interrupt + * @retval The new state of __IT__ (TRUE or FALSE). + */ +#define __HAL_IRDA_GET_IT_SOURCE(__HANDLE__, __IT__) (((((__IT__) >> 28) == IRDA_CR1_REG_INDEX)? (__HANDLE__)->Instance->CR1:((((__IT__) >> 28) == IRDA_CR2_REG_INDEX)? \ + (__HANDLE__)->Instance->CR2 : (__HANDLE__)->Instance->CR3)) & (((uint32_t)(__IT__)) & IRDA_IT_MASK)) + +/** @brief Enables the IRDA one bit sample method + * @param __HANDLE__: specifies the IRDA Handle. + * @retval None + */ +#define __HAL_IRDA_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR3, (USART_CR3_ONEBIT))) + +/** @brief Disables the IRDA one bit sample method + * @param __HANDLE__: specifies the IRDA Handle. + * @retval None + */ +#define __HAL_IRDA_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) (CLEAR_BIT((__HANDLE__)->Instance->CR3, (USART_CR3_ONEBIT))) + +/** @brief Enable UART/USART associated to IRDA Handle + * @param __HANDLE__: specifies the IRDA Handle. + * IRDA Handle selects the USARTx or UARTy peripheral + * (USART,UART availability and x,y values depending on device). + * @retval None + */ +#define __HAL_IRDA_ENABLE(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR1, USART_CR1_UE)) + +/** @brief Disable UART/USART associated to IRDA Handle + * @param __HANDLE__: specifies the IRDA Handle. + * IRDA Handle selects the USARTx or UARTy peripheral + * (USART,UART availability and x,y values depending on device). + * @retval None + */ +#define __HAL_IRDA_DISABLE(__HANDLE__) (CLEAR_BIT((__HANDLE__)->Instance->CR1, USART_CR1_UE)) + +/** + * @} + */ + +/* Private macros --------------------------------------------------------*/ +/** @defgroup IRDA_Private_Macros IRDA Private Macros + * @{ + */ + +#define IRDA_CR1_REG_INDEX 1 +#define IRDA_CR2_REG_INDEX 2 +#define IRDA_CR3_REG_INDEX 3 + +#define IRDA_DIV(__PCLK__, __BAUD__) (((__PCLK__)*25)/(4*(__BAUD__))) +#define IRDA_DIVMANT(__PCLK__, __BAUD__) (IRDA_DIV((__PCLK__), (__BAUD__))/100) +#define IRDA_DIVFRAQ(__PCLK__, __BAUD__) (((IRDA_DIV((__PCLK__), (__BAUD__)) - (IRDA_DIVMANT((__PCLK__), (__BAUD__)) * 100)) * 16 + 50) / 100) +/* UART BRR = mantissa + overflow + fraction + = (UART DIVMANT << 4) + (UART DIVFRAQ & 0xF0) + (UART DIVFRAQ & 0x0F) */ +#define IRDA_BRR(_PCLK_, _BAUD_) (((IRDA_DIVMANT((_PCLK_), (_BAUD_)) << 4) + \ + (IRDA_DIVFRAQ((_PCLK_), (_BAUD_)) & 0xF0)) + \ + (IRDA_DIVFRAQ((_PCLK_), (_BAUD_)) & 0x0F)) + +/** Ensure that IRDA Baud rate is less or equal to maximum value + * __BAUDRATE__: specifies the IRDA Baudrate set by the user. + * The maximum Baud Rate is 115200bps + * Returns : True or False + */ +#define IS_IRDA_BAUDRATE(__BAUDRATE__) ((__BAUDRATE__) < 115201) + +#define IS_IRDA_WORD_LENGTH(LENGTH) (((LENGTH) == IRDA_WORDLENGTH_8B) || \ + ((LENGTH) == IRDA_WORDLENGTH_9B)) + +#define IS_IRDA_PARITY(PARITY) (((PARITY) == IRDA_PARITY_NONE) || \ + ((PARITY) == IRDA_PARITY_EVEN) || \ + ((PARITY) == IRDA_PARITY_ODD)) + +#define IS_IRDA_MODE(MODE) ((((MODE) & (~((uint32_t)IRDA_MODE_TX_RX))) == 0x00) && \ + ((MODE) != (uint32_t)0x00000000)) + +#define IS_IRDA_POWERMODE(MODE) (((MODE) == IRDA_POWERMODE_LOWPOWER) || \ + ((MODE) == IRDA_POWERMODE_NORMAL)) + +/** IRDA interruptions flag mask + * + */ +#define IRDA_IT_MASK ((uint32_t) USART_CR1_PEIE | USART_CR1_TXEIE | USART_CR1_TCIE | USART_CR1_RXNEIE | \ + USART_CR1_IDLEIE | USART_CR2_LBDIE | USART_CR3_CTSIE | USART_CR3_EIE ) + +/** + * @} + */ + + +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup IRDA_Exported_Functions IRDA Exported Functions + * @{ + */ + +/** @addtogroup IRDA_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ + +/* Initialization and de-initialization functions ****************************/ +HAL_StatusTypeDef HAL_IRDA_Init(IRDA_HandleTypeDef *hirda); +HAL_StatusTypeDef HAL_IRDA_DeInit(IRDA_HandleTypeDef *hirda); +void HAL_IRDA_MspInit(IRDA_HandleTypeDef *hirda); +void HAL_IRDA_MspDeInit(IRDA_HandleTypeDef *hirda); + +/** + * @} + */ + +/** @addtogroup IRDA_Exported_Functions_Group2 IO operation functions + * @{ + */ + +/* IO operation functions *****************************************************/ +HAL_StatusTypeDef HAL_IRDA_Transmit(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_IRDA_Receive(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_IRDA_Transmit_IT(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_IRDA_Receive_IT(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_IRDA_Transmit_DMA(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_IRDA_Receive_DMA(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_IRDA_DMAPause(IRDA_HandleTypeDef *hirda); +HAL_StatusTypeDef HAL_IRDA_DMAResume(IRDA_HandleTypeDef *hirda); +HAL_StatusTypeDef HAL_IRDA_DMAStop(IRDA_HandleTypeDef *hirda); +void HAL_IRDA_IRQHandler(IRDA_HandleTypeDef *hirda); +void HAL_IRDA_TxCpltCallback(IRDA_HandleTypeDef *hirda); +void HAL_IRDA_RxCpltCallback(IRDA_HandleTypeDef *hirda); +void HAL_IRDA_TxHalfCpltCallback(IRDA_HandleTypeDef *hirda); +void HAL_IRDA_RxHalfCpltCallback(IRDA_HandleTypeDef *hirda); +void HAL_IRDA_ErrorCallback(IRDA_HandleTypeDef *hirda); + +/** + * @} + */ + +/** @addtogroup IRDA_Exported_Functions_Group3 Peripheral State and Errors functions + * @{ + */ + +/* Peripheral State and Error functions ***************************************/ +HAL_IRDA_StateTypeDef HAL_IRDA_GetState(IRDA_HandleTypeDef *hirda); +uint32_t HAL_IRDA_GetError(IRDA_HandleTypeDef *hirda); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32L1xx_HAL_IRDA_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_iwdg.h b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_iwdg.h new file mode 100755 index 0000000..d16fede --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_iwdg.h @@ -0,0 +1,239 @@ +/** + ****************************************************************************** + * @file stm32l1xx_hal_iwdg.h + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief Header file of IWDG HAL module. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L1xx_HAL_IWDG_H +#define __STM32L1xx_HAL_IWDG_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_hal_def.h" + +/** @addtogroup STM32L1xx_HAL_Driver + * @{ + */ + +/** @defgroup IWDG IWDG + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup IWDG_Exported_Types IWDG Exported Types + * @{ + */ + +/** + * @brief IWDG Init structure definition + */ +typedef struct +{ + uint32_t Prescaler; /*!< Select the prescaler of the IWDG. + This parameter can be a value of @ref IWDG_Prescaler */ + + uint32_t Reload; /*!< Specifies the IWDG down-counter reload value. + This parameter must be a number between Min_Data = 0 and Max_Data = 0x0FFF */ + +}IWDG_InitTypeDef; + +/** + * @brief IWDG Handle Structure definition + */ +typedef struct +{ + IWDG_TypeDef *Instance; /*!< Register base address */ + + IWDG_InitTypeDef Init; /*!< IWDG required parameters */ + +}IWDG_HandleTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup IWDG_Exported_Constants IWDG Exported Constants + * @{ + */ + +/** @defgroup IWDG_Prescaler IWDG Prescaler + * @{ + */ +#define IWDG_PRESCALER_4 0x00000000u /*!< IWDG prescaler set to 4 */ +#define IWDG_PRESCALER_8 IWDG_PR_PR_0 /*!< IWDG prescaler set to 8 */ +#define IWDG_PRESCALER_16 IWDG_PR_PR_1 /*!< IWDG prescaler set to 16 */ +#define IWDG_PRESCALER_32 (IWDG_PR_PR_1 | IWDG_PR_PR_0) /*!< IWDG prescaler set to 32 */ +#define IWDG_PRESCALER_64 IWDG_PR_PR_2 /*!< IWDG prescaler set to 64 */ +#define IWDG_PRESCALER_128 (IWDG_PR_PR_2 | IWDG_PR_PR_0) /*!< IWDG prescaler set to 128 */ +#define IWDG_PRESCALER_256 (IWDG_PR_PR_2 | IWDG_PR_PR_1) /*!< IWDG prescaler set to 256 */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup IWDG_Exported_Macros IWDG Exported Macros + * @{ + */ + +/** + * @brief Enable the IWDG peripheral. + * @param __HANDLE__ IWDG handle + * @retval None + */ +#define __HAL_IWDG_START(__HANDLE__) WRITE_REG((__HANDLE__)->Instance->KR, IWDG_KEY_ENABLE) + +/** + * @brief Reload IWDG counter with value defined in the reload register + * (write access to IWDG_PR, IWDG_RLR & IWDG_WINR registers disabled). + * @param __HANDLE__ IWDG handle + * @retval None + */ +#define __HAL_IWDG_RELOAD_COUNTER(__HANDLE__) WRITE_REG((__HANDLE__)->Instance->KR, IWDG_KEY_RELOAD) + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup IWDG_Exported_Functions IWDG Exported Functions + * @{ + */ + +/** @defgroup IWDG_Exported_Functions_Group1 Initialization and Start functions + * @{ + */ +/* Initialization/Start functions ********************************************/ +HAL_StatusTypeDef HAL_IWDG_Init(IWDG_HandleTypeDef *hiwdg); +/** + * @} + */ + +/** @defgroup IWDG_Exported_Functions_Group2 IO operation functions + * @{ + */ +/* I/O operation functions ****************************************************/ +HAL_StatusTypeDef HAL_IWDG_Refresh(IWDG_HandleTypeDef *hiwdg); +/** + * @} + */ + +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup IWDG_Private_Constants IWDG Private Constants + * @{ + */ + +/** + * @brief IWDG Key Register BitMask + */ +#define IWDG_KEY_RELOAD 0x0000AAAAu /*!< IWDG Reload Counter Enable */ +#define IWDG_KEY_ENABLE 0x0000CCCCu /*!< IWDG Peripheral Enable */ +#define IWDG_KEY_WRITE_ACCESS_ENABLE 0x00005555u /*!< IWDG KR Write Access Enable */ +#define IWDG_KEY_WRITE_ACCESS_DISABLE 0x00000000u /*!< IWDG KR Write Access Disable */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup IWDG_Private_Macros IWDG Private Macros + * @{ + */ + +/** + * @brief Enable write access to IWDG_PR, IWDG_RLR and IWDG_WINR registers. + * @param __HANDLE__ IWDG handle + * @retval None + */ +#define IWDG_ENABLE_WRITE_ACCESS(__HANDLE__) WRITE_REG((__HANDLE__)->Instance->KR, IWDG_KEY_WRITE_ACCESS_ENABLE) + +/** + * @brief Disable write access to IWDG_PR, IWDG_RLR and IWDG_WINR registers. + * @param __HANDLE__ IWDG handle + * @retval None + */ +#define IWDG_DISABLE_WRITE_ACCESS(__HANDLE__) WRITE_REG((__HANDLE__)->Instance->KR, IWDG_KEY_WRITE_ACCESS_DISABLE) + +/** + * @brief Check IWDG prescaler value. + * @param __PRESCALER__ IWDG prescaler value + * @retval None + */ +#define IS_IWDG_PRESCALER(__PRESCALER__) (((__PRESCALER__) == IWDG_PRESCALER_4) || \ + ((__PRESCALER__) == IWDG_PRESCALER_8) || \ + ((__PRESCALER__) == IWDG_PRESCALER_16) || \ + ((__PRESCALER__) == IWDG_PRESCALER_32) || \ + ((__PRESCALER__) == IWDG_PRESCALER_64) || \ + ((__PRESCALER__) == IWDG_PRESCALER_128)|| \ + ((__PRESCALER__) == IWDG_PRESCALER_256)) + +/** + * @brief Check IWDG reload value. + * @param __RELOAD__ IWDG reload value + * @retval None + */ +#define IS_IWDG_RELOAD(__RELOAD__) ((__RELOAD__) <= IWDG_RLR_RL) + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32L1xx_HAL_IWDG_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_lcd.h b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_lcd.h new file mode 100755 index 0000000..1e5c6dc --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_lcd.h @@ -0,0 +1,779 @@ +/** + ****************************************************************************** + * @file stm32l1xx_hal_lcd.h + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief Header file of LCD Controller HAL module. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L1xx_HAL_LCD_H +#define __STM32L1xx_HAL_LCD_H + +#ifdef __cplusplus + extern "C" { +#endif + +/** @addtogroup STM32L1xx_HAL_Driver + * @{ + */ + +#if defined (STM32L100xB) || defined (STM32L100xBA) || defined (STM32L100xC) ||\ + defined (STM32L152xB) || defined (STM32L152xBA) || defined (STM32L152xC) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L152xE) || defined (STM32L152xDX) ||\ + defined (STM32L162xC) || defined (STM32L162xCA) || defined (STM32L162xD) || defined (STM32L162xE) || defined (STM32L162xDX) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_hal_def.h" + +/** @addtogroup LCD + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup LCD_Exported_Types LCD Exported Types + * @{ + */ + +/** + * @brief LCD Init structure definition + */ + +typedef struct +{ + uint32_t Prescaler; /*!< Configures the LCD Prescaler. + This parameter can be one value of @ref LCD_Prescaler */ + uint32_t Divider; /*!< Configures the LCD Divider. + This parameter can be one value of @ref LCD_Divider */ + uint32_t Duty; /*!< Configures the LCD Duty. + This parameter can be one value of @ref LCD_Duty */ + uint32_t Bias; /*!< Configures the LCD Bias. + This parameter can be one value of @ref LCD_Bias */ + uint32_t VoltageSource; /*!< Selects the LCD Voltage source. + This parameter can be one value of @ref LCD_Voltage_Source */ + uint32_t Contrast; /*!< Configures the LCD Contrast. + This parameter can be one value of @ref LCD_Contrast */ + uint32_t DeadTime; /*!< Configures the LCD Dead Time. + This parameter can be one value of @ref LCD_DeadTime */ + uint32_t PulseOnDuration; /*!< Configures the LCD Pulse On Duration. + This parameter can be one value of @ref LCD_PulseOnDuration */ + uint32_t HighDrive; /*!< Configures the LCD High Drive. + This parameter can be one value of @ref LCD_HighDrive */ + uint32_t BlinkMode; /*!< Configures the LCD Blink Mode. + This parameter can be one value of @ref LCD_BlinkMode */ + uint32_t BlinkFrequency; /*!< Configures the LCD Blink frequency. + This parameter can be one value of @ref LCD_BlinkFrequency */ + uint32_t MuxSegment; /*!< Enable or disable mux segment. + This parameter can be set to ENABLE or DISABLE. */ +}LCD_InitTypeDef; + +/** + * @brief HAL LCD State structures definition + */ +typedef enum +{ + HAL_LCD_STATE_RESET = 0x00, /*!< Peripheral is not yet Initialized */ + HAL_LCD_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */ + HAL_LCD_STATE_BUSY = 0x02, /*!< an internal process is ongoing */ + HAL_LCD_STATE_TIMEOUT = 0x03, /*!< Timeout state */ + HAL_LCD_STATE_ERROR = 0x04 /*!< Error */ +}HAL_LCD_StateTypeDef; + +/** + * @brief UART handle Structure definition + */ +typedef struct +{ + LCD_TypeDef *Instance; /* LCD registers base address */ + + LCD_InitTypeDef Init; /* LCD communication parameters */ + + HAL_LockTypeDef Lock; /* Locking object */ + + __IO HAL_LCD_StateTypeDef State; /* LCD communication state */ + + __IO uint32_t ErrorCode; /* LCD Error code */ + +}LCD_HandleTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup LCD_Exported_Constants LCD Exported Constants + * @{ + */ + +/** @defgroup LCD_Error_Codes LCD Error Codes + * @{ + */ + +#define HAL_LCD_ERROR_NONE ((uint32_t)0x00) /*!< No error */ +#define HAL_LCD_ERROR_FCRSF ((uint32_t)0x01) /*!< Synchro flag timeout error */ +#define HAL_LCD_ERROR_UDR ((uint32_t)0x02) /*!< Update display request flag timeout error */ +#define HAL_LCD_ERROR_UDD ((uint32_t)0x04) /*!< Update display done flag timeout error */ +#define HAL_LCD_ERROR_ENS ((uint32_t)0x08) /*!< LCD enabled status flag timeout error */ +#define HAL_LCD_ERROR_RDY ((uint32_t)0x10) /*!< LCD Booster ready timeout error */ + +/** + * @} + */ + +/** @defgroup LCD_Prescaler LCD Prescaler + * @{ + */ + +#define LCD_PRESCALER_1 ((uint32_t)0x00000000) /*!< CLKPS = LCDCLK */ +#define LCD_PRESCALER_2 ((uint32_t)0x00400000) /*!< CLKPS = LCDCLK/2 */ +#define LCD_PRESCALER_4 ((uint32_t)0x00800000) /*!< CLKPS = LCDCLK/4 */ +#define LCD_PRESCALER_8 ((uint32_t)0x00C00000) /*!< CLKPS = LCDCLK/8 */ +#define LCD_PRESCALER_16 ((uint32_t)0x01000000) /*!< CLKPS = LCDCLK/16 */ +#define LCD_PRESCALER_32 ((uint32_t)0x01400000) /*!< CLKPS = LCDCLK/32 */ +#define LCD_PRESCALER_64 ((uint32_t)0x01800000) /*!< CLKPS = LCDCLK/64 */ +#define LCD_PRESCALER_128 ((uint32_t)0x01C00000) /*!< CLKPS = LCDCLK/128 */ +#define LCD_PRESCALER_256 ((uint32_t)0x02000000) /*!< CLKPS = LCDCLK/256 */ +#define LCD_PRESCALER_512 ((uint32_t)0x02400000) /*!< CLKPS = LCDCLK/512 */ +#define LCD_PRESCALER_1024 ((uint32_t)0x02800000) /*!< CLKPS = LCDCLK/1024 */ +#define LCD_PRESCALER_2048 ((uint32_t)0x02C00000) /*!< CLKPS = LCDCLK/2048 */ +#define LCD_PRESCALER_4096 ((uint32_t)0x03000000) /*!< CLKPS = LCDCLK/4096 */ +#define LCD_PRESCALER_8192 ((uint32_t)0x03400000) /*!< CLKPS = LCDCLK/8192 */ +#define LCD_PRESCALER_16384 ((uint32_t)0x03800000) /*!< CLKPS = LCDCLK/16384 */ +#define LCD_PRESCALER_32768 ((uint32_t)LCD_FCR_PS) /*!< CLKPS = LCDCLK/32768 */ + +#define IS_LCD_PRESCALER(__PRESCALER__) (((__PRESCALER__) == LCD_PRESCALER_1) || \ + ((__PRESCALER__) == LCD_PRESCALER_2) || \ + ((__PRESCALER__) == LCD_PRESCALER_4) || \ + ((__PRESCALER__) == LCD_PRESCALER_8) || \ + ((__PRESCALER__) == LCD_PRESCALER_16) || \ + ((__PRESCALER__) == LCD_PRESCALER_32) || \ + ((__PRESCALER__) == LCD_PRESCALER_64) || \ + ((__PRESCALER__) == LCD_PRESCALER_128) || \ + ((__PRESCALER__) == LCD_PRESCALER_256) || \ + ((__PRESCALER__) == LCD_PRESCALER_512) || \ + ((__PRESCALER__) == LCD_PRESCALER_1024) || \ + ((__PRESCALER__) == LCD_PRESCALER_2048) || \ + ((__PRESCALER__) == LCD_PRESCALER_4096) || \ + ((__PRESCALER__) == LCD_PRESCALER_8192) || \ + ((__PRESCALER__) == LCD_PRESCALER_16384) || \ + ((__PRESCALER__) == LCD_PRESCALER_32768)) + +/** + * @} + */ + +/** @defgroup LCD_Divider LCD Divider + * @{ + */ + +#define LCD_DIVIDER_16 ((uint32_t)0x00000000) /*!< LCD frequency = CLKPS/16 */ +#define LCD_DIVIDER_17 ((uint32_t)0x00040000) /*!< LCD frequency = CLKPS/17 */ +#define LCD_DIVIDER_18 ((uint32_t)0x00080000) /*!< LCD frequency = CLKPS/18 */ +#define LCD_DIVIDER_19 ((uint32_t)0x000C0000) /*!< LCD frequency = CLKPS/19 */ +#define LCD_DIVIDER_20 ((uint32_t)0x00100000) /*!< LCD frequency = CLKPS/20 */ +#define LCD_DIVIDER_21 ((uint32_t)0x00140000) /*!< LCD frequency = CLKPS/21 */ +#define LCD_DIVIDER_22 ((uint32_t)0x00180000) /*!< LCD frequency = CLKPS/22 */ +#define LCD_DIVIDER_23 ((uint32_t)0x001C0000) /*!< LCD frequency = CLKPS/23 */ +#define LCD_DIVIDER_24 ((uint32_t)0x00200000) /*!< LCD frequency = CLKPS/24 */ +#define LCD_DIVIDER_25 ((uint32_t)0x00240000) /*!< LCD frequency = CLKPS/25 */ +#define LCD_DIVIDER_26 ((uint32_t)0x00280000) /*!< LCD frequency = CLKPS/26 */ +#define LCD_DIVIDER_27 ((uint32_t)0x002C0000) /*!< LCD frequency = CLKPS/27 */ +#define LCD_DIVIDER_28 ((uint32_t)0x00300000) /*!< LCD frequency = CLKPS/28 */ +#define LCD_DIVIDER_29 ((uint32_t)0x00340000) /*!< LCD frequency = CLKPS/29 */ +#define LCD_DIVIDER_30 ((uint32_t)0x00380000) /*!< LCD frequency = CLKPS/30 */ +#define LCD_DIVIDER_31 ((uint32_t)LCD_FCR_DIV) /*!< LCD frequency = CLKPS/31 */ + +#define IS_LCD_DIVIDER(__DIVIDER__) (((__DIVIDER__) == LCD_DIVIDER_16) || \ + ((__DIVIDER__) == LCD_DIVIDER_17) || \ + ((__DIVIDER__) == LCD_DIVIDER_18) || \ + ((__DIVIDER__) == LCD_DIVIDER_19) || \ + ((__DIVIDER__) == LCD_DIVIDER_20) || \ + ((__DIVIDER__) == LCD_DIVIDER_21) || \ + ((__DIVIDER__) == LCD_DIVIDER_22) || \ + ((__DIVIDER__) == LCD_DIVIDER_23) || \ + ((__DIVIDER__) == LCD_DIVIDER_24) || \ + ((__DIVIDER__) == LCD_DIVIDER_25) || \ + ((__DIVIDER__) == LCD_DIVIDER_26) || \ + ((__DIVIDER__) == LCD_DIVIDER_27) || \ + ((__DIVIDER__) == LCD_DIVIDER_28) || \ + ((__DIVIDER__) == LCD_DIVIDER_29) || \ + ((__DIVIDER__) == LCD_DIVIDER_30) || \ + ((__DIVIDER__) == LCD_DIVIDER_31)) + +/** + * @} + */ + + +/** @defgroup LCD_Duty LCD Duty + * @{ + */ + +#define LCD_DUTY_STATIC ((uint32_t)0x00000000) /*!< Static duty */ +#define LCD_DUTY_1_2 (LCD_CR_DUTY_0) /*!< 1/2 duty */ +#define LCD_DUTY_1_3 (LCD_CR_DUTY_1) /*!< 1/3 duty */ +#define LCD_DUTY_1_4 ((LCD_CR_DUTY_1 | LCD_CR_DUTY_0)) /*!< 1/4 duty */ +#define LCD_DUTY_1_8 (LCD_CR_DUTY_2) /*!< 1/8 duty */ + +#define IS_LCD_DUTY(__DUTY__) (((__DUTY__) == LCD_DUTY_STATIC) || \ + ((__DUTY__) == LCD_DUTY_1_2) || \ + ((__DUTY__) == LCD_DUTY_1_3) || \ + ((__DUTY__) == LCD_DUTY_1_4) || \ + ((__DUTY__) == LCD_DUTY_1_8)) + +/** + * @} + */ + + +/** @defgroup LCD_Bias LCD Bias + * @{ + */ + +#define LCD_BIAS_1_4 ((uint32_t)0x00000000) /*!< 1/4 Bias */ +#define LCD_BIAS_1_2 LCD_CR_BIAS_0 /*!< 1/2 Bias */ +#define LCD_BIAS_1_3 LCD_CR_BIAS_1 /*!< 1/3 Bias */ + +#define IS_LCD_BIAS(__BIAS__) (((__BIAS__) == LCD_BIAS_1_4) || \ + ((__BIAS__) == LCD_BIAS_1_2) || \ + ((__BIAS__) == LCD_BIAS_1_3)) +/** + * @} + */ + +/** @defgroup LCD_Voltage_Source LCD Voltage Source + * @{ + */ + +#define LCD_VOLTAGESOURCE_INTERNAL ((uint32_t)0x00000000) /*!< Internal voltage source for the LCD */ +#define LCD_VOLTAGESOURCE_EXTERNAL LCD_CR_VSEL /*!< External voltage source for the LCD */ + +#define IS_LCD_VOLTAGE_SOURCE(SOURCE) (((SOURCE) == LCD_VOLTAGESOURCE_INTERNAL) || \ + ((SOURCE) == LCD_VOLTAGESOURCE_EXTERNAL)) + +/** + * @} + */ + +/** @defgroup LCD_Interrupts LCD Interrupts + * @{ + */ +#define LCD_IT_SOF LCD_FCR_SOFIE +#define LCD_IT_UDD LCD_FCR_UDDIE + +/** + * @} + */ + +/** @defgroup LCD_PulseOnDuration LCD Pulse On Duration + * @{ + */ + +#define LCD_PULSEONDURATION_0 ((uint32_t)0x00000000) /*!< Pulse ON duration = 0 pulse */ +#define LCD_PULSEONDURATION_1 (LCD_FCR_PON_0) /*!< Pulse ON duration = 1/CK_PS */ +#define LCD_PULSEONDURATION_2 (LCD_FCR_PON_1) /*!< Pulse ON duration = 2/CK_PS */ +#define LCD_PULSEONDURATION_3 (LCD_FCR_PON_1 | LCD_FCR_PON_0) /*!< Pulse ON duration = 3/CK_PS */ +#define LCD_PULSEONDURATION_4 (LCD_FCR_PON_2) /*!< Pulse ON duration = 4/CK_PS */ +#define LCD_PULSEONDURATION_5 (LCD_FCR_PON_2 | LCD_FCR_PON_0) /*!< Pulse ON duration = 5/CK_PS */ +#define LCD_PULSEONDURATION_6 (LCD_FCR_PON_2 | LCD_FCR_PON_1) /*!< Pulse ON duration = 6/CK_PS */ +#define LCD_PULSEONDURATION_7 (LCD_FCR_PON) /*!< Pulse ON duration = 7/CK_PS */ + +#define IS_LCD_PULSE_ON_DURATION(__DURATION__) (((__DURATION__) == LCD_PULSEONDURATION_0) || \ + ((__DURATION__) == LCD_PULSEONDURATION_1) || \ + ((__DURATION__) == LCD_PULSEONDURATION_2) || \ + ((__DURATION__) == LCD_PULSEONDURATION_3) || \ + ((__DURATION__) == LCD_PULSEONDURATION_4) || \ + ((__DURATION__) == LCD_PULSEONDURATION_5) || \ + ((__DURATION__) == LCD_PULSEONDURATION_6) || \ + ((__DURATION__) == LCD_PULSEONDURATION_7)) +/** + * @} + */ + +/** @defgroup LCD_HighDrive LCD HighDrive + * @{ + */ + +#define LCD_HIGHDRIVE_0 ((uint32_t)0x00000000) /*!< Low resistance Drive */ +#define LCD_HIGHDRIVE_1 (LCD_FCR_HD) /*!< High resistance Drive */ + +#define IS_LCD_HIGHDRIVE(__HIGHDRIVE__) (((__HIGHDRIVE__) == LCD_HIGHDRIVE_0) || \ + ((__HIGHDRIVE__) == LCD_HIGHDRIVE_1)) +/** + * @} + */ + +/** @defgroup LCD_DeadTime LCD Dead Time + * @{ + */ + +#define LCD_DEADTIME_0 ((uint32_t)0x00000000) /*!< No dead Time */ +#define LCD_DEADTIME_1 (LCD_FCR_DEAD_0) /*!< One Phase between different couple of Frame */ +#define LCD_DEADTIME_2 (LCD_FCR_DEAD_1) /*!< Two Phase between different couple of Frame */ +#define LCD_DEADTIME_3 (LCD_FCR_DEAD_1 | LCD_FCR_DEAD_0) /*!< Three Phase between different couple of Frame */ +#define LCD_DEADTIME_4 (LCD_FCR_DEAD_2) /*!< Four Phase between different couple of Frame */ +#define LCD_DEADTIME_5 (LCD_FCR_DEAD_2 | LCD_FCR_DEAD_0) /*!< Five Phase between different couple of Frame */ +#define LCD_DEADTIME_6 (LCD_FCR_DEAD_2 | LCD_FCR_DEAD_1) /*!< Six Phase between different couple of Frame */ +#define LCD_DEADTIME_7 (LCD_FCR_DEAD) /*!< Seven Phase between different couple of Frame */ + +#define IS_LCD_DEAD_TIME(__TIME__) (((__TIME__) == LCD_DEADTIME_0) || \ + ((__TIME__) == LCD_DEADTIME_1) || \ + ((__TIME__) == LCD_DEADTIME_2) || \ + ((__TIME__) == LCD_DEADTIME_3) || \ + ((__TIME__) == LCD_DEADTIME_4) || \ + ((__TIME__) == LCD_DEADTIME_5) || \ + ((__TIME__) == LCD_DEADTIME_6) || \ + ((__TIME__) == LCD_DEADTIME_7)) +/** + * @} + */ + +/** @defgroup LCD_BlinkMode LCD Blink Mode + * @{ + */ + +#define LCD_BLINKMODE_OFF ((uint32_t)0x00000000) /*!< Blink disabled */ +#define LCD_BLINKMODE_SEG0_COM0 (LCD_FCR_BLINK_0) /*!< Blink enabled on SEG[0], COM[0] (1 pixel) */ +#define LCD_BLINKMODE_SEG0_ALLCOM (LCD_FCR_BLINK_1) /*!< Blink enabled on SEG[0], all COM (up to + 8 pixels according to the programmed duty) */ +#define LCD_BLINKMODE_ALLSEG_ALLCOM (LCD_FCR_BLINK) /*!< Blink enabled on all SEG and all COM (all pixels) */ + +#define IS_LCD_BLINK_MODE(__MODE__) (((__MODE__) == LCD_BLINKMODE_OFF) || \ + ((__MODE__) == LCD_BLINKMODE_SEG0_COM0) || \ + ((__MODE__) == LCD_BLINKMODE_SEG0_ALLCOM) || \ + ((__MODE__) == LCD_BLINKMODE_ALLSEG_ALLCOM)) +/** + * @} + */ + +/** @defgroup LCD_BlinkFrequency LCD Blink Frequency + * @{ + */ + +#define LCD_BLINKFREQUENCY_DIV8 ((uint32_t)0x00000000) /*!< The Blink frequency = fLCD/8 */ +#define LCD_BLINKFREQUENCY_DIV16 (LCD_FCR_BLINKF_0) /*!< The Blink frequency = fLCD/16 */ +#define LCD_BLINKFREQUENCY_DIV32 (LCD_FCR_BLINKF_1) /*!< The Blink frequency = fLCD/32 */ +#define LCD_BLINKFREQUENCY_DIV64 (LCD_FCR_BLINKF_1 | LCD_FCR_BLINKF_0) /*!< The Blink frequency = fLCD/64 */ +#define LCD_BLINKFREQUENCY_DIV128 (LCD_FCR_BLINKF_2) /*!< The Blink frequency = fLCD/128 */ +#define LCD_BLINKFREQUENCY_DIV256 (LCD_FCR_BLINKF_2 |LCD_FCR_BLINKF_0) /*!< The Blink frequency = fLCD/256 */ +#define LCD_BLINKFREQUENCY_DIV512 (LCD_FCR_BLINKF_2 |LCD_FCR_BLINKF_1) /*!< The Blink frequency = fLCD/512 */ +#define LCD_BLINKFREQUENCY_DIV1024 (LCD_FCR_BLINKF) /*!< The Blink frequency = fLCD/1024 */ + +#define IS_LCD_BLINK_FREQUENCY(__FREQUENCY__) (((__FREQUENCY__) == LCD_BLINKFREQUENCY_DIV8) || \ + ((__FREQUENCY__) == LCD_BLINKFREQUENCY_DIV16) || \ + ((__FREQUENCY__) == LCD_BLINKFREQUENCY_DIV32) || \ + ((__FREQUENCY__) == LCD_BLINKFREQUENCY_DIV64) || \ + ((__FREQUENCY__) == LCD_BLINKFREQUENCY_DIV128) || \ + ((__FREQUENCY__) == LCD_BLINKFREQUENCY_DIV256) || \ + ((__FREQUENCY__) == LCD_BLINKFREQUENCY_DIV512) || \ + ((__FREQUENCY__) == LCD_BLINKFREQUENCY_DIV1024)) +/** + * @} + */ + +/** @defgroup LCD_Contrast LCD Contrast + * @{ + */ + +#define LCD_CONTRASTLEVEL_0 ((uint32_t)0x00000000) /*!< Maximum Voltage = 2.60V */ +#define LCD_CONTRASTLEVEL_1 (LCD_FCR_CC_0) /*!< Maximum Voltage = 2.73V */ +#define LCD_CONTRASTLEVEL_2 (LCD_FCR_CC_1) /*!< Maximum Voltage = 2.86V */ +#define LCD_CONTRASTLEVEL_3 (LCD_FCR_CC_1 | LCD_FCR_CC_0) /*!< Maximum Voltage = 2.99V */ +#define LCD_CONTRASTLEVEL_4 (LCD_FCR_CC_2) /*!< Maximum Voltage = 3.12V */ +#define LCD_CONTRASTLEVEL_5 (LCD_FCR_CC_2 | LCD_FCR_CC_0) /*!< Maximum Voltage = 3.25V */ +#define LCD_CONTRASTLEVEL_6 (LCD_FCR_CC_2 | LCD_FCR_CC_1) /*!< Maximum Voltage = 3.38V */ +#define LCD_CONTRASTLEVEL_7 (LCD_FCR_CC) /*!< Maximum Voltage = 3.51V */ + +#define IS_LCD_CONTRAST(__CONTRAST__) (((__CONTRAST__) == LCD_CONTRASTLEVEL_0) || \ + ((__CONTRAST__) == LCD_CONTRASTLEVEL_1) || \ + ((__CONTRAST__) == LCD_CONTRASTLEVEL_2) || \ + ((__CONTRAST__) == LCD_CONTRASTLEVEL_3) || \ + ((__CONTRAST__) == LCD_CONTRASTLEVEL_4) || \ + ((__CONTRAST__) == LCD_CONTRASTLEVEL_5) || \ + ((__CONTRAST__) == LCD_CONTRASTLEVEL_6) || \ + ((__CONTRAST__) == LCD_CONTRASTLEVEL_7)) +/** + * @} + */ + +/** @defgroup LCD_MuxSegment LCD Mux Segment + * @{ + */ + +#define LCD_MUXSEGMENT_DISABLE ((uint32_t)0x00000000) /*!< SEG pin multiplexing disabled */ +#define LCD_MUXSEGMENT_ENABLE (LCD_CR_MUX_SEG) /*!< SEG[31:28] are multiplexed with SEG[43:40] */ + +#define IS_LCD_MUXSEGMENT(__VALUE__) (((__VALUE__) == LCD_MUXSEGMENT_ENABLE) || \ + ((__VALUE__) == LCD_MUXSEGMENT_DISABLE)) +/** + * @} + */ + +/** @defgroup LCD_Flag LCD Flag + * @{ + */ + +#define LCD_FLAG_ENS LCD_SR_ENS +#define LCD_FLAG_SOF LCD_SR_SOF +#define LCD_FLAG_UDR LCD_SR_UDR +#define LCD_FLAG_UDD LCD_SR_UDD +#define LCD_FLAG_RDY LCD_SR_RDY +#define LCD_FLAG_FCRSF LCD_SR_FCRSR + +/** + * @} + */ + +/** @defgroup LCD_RAMRegister LCD RAMRegister + * @{ + */ + +#define LCD_RAM_REGISTER0 ((uint32_t)0x00000000) /*!< LCD RAM Register 0 */ +#define LCD_RAM_REGISTER1 ((uint32_t)0x00000001) /*!< LCD RAM Register 1 */ +#define LCD_RAM_REGISTER2 ((uint32_t)0x00000002) /*!< LCD RAM Register 2 */ +#define LCD_RAM_REGISTER3 ((uint32_t)0x00000003) /*!< LCD RAM Register 3 */ +#define LCD_RAM_REGISTER4 ((uint32_t)0x00000004) /*!< LCD RAM Register 4 */ +#define LCD_RAM_REGISTER5 ((uint32_t)0x00000005) /*!< LCD RAM Register 5 */ +#define LCD_RAM_REGISTER6 ((uint32_t)0x00000006) /*!< LCD RAM Register 6 */ +#define LCD_RAM_REGISTER7 ((uint32_t)0x00000007) /*!< LCD RAM Register 7 */ +#define LCD_RAM_REGISTER8 ((uint32_t)0x00000008) /*!< LCD RAM Register 8 */ +#define LCD_RAM_REGISTER9 ((uint32_t)0x00000009) /*!< LCD RAM Register 9 */ +#define LCD_RAM_REGISTER10 ((uint32_t)0x0000000A) /*!< LCD RAM Register 10 */ +#define LCD_RAM_REGISTER11 ((uint32_t)0x0000000B) /*!< LCD RAM Register 11 */ +#define LCD_RAM_REGISTER12 ((uint32_t)0x0000000C) /*!< LCD RAM Register 12 */ +#define LCD_RAM_REGISTER13 ((uint32_t)0x0000000D) /*!< LCD RAM Register 13 */ +#define LCD_RAM_REGISTER14 ((uint32_t)0x0000000E) /*!< LCD RAM Register 14 */ +#define LCD_RAM_REGISTER15 ((uint32_t)0x0000000F) /*!< LCD RAM Register 15 */ + +#define IS_LCD_RAM_REGISTER(__REGISTER__) (((__REGISTER__) == LCD_RAM_REGISTER0) || \ + ((__REGISTER__) == LCD_RAM_REGISTER1) || \ + ((__REGISTER__) == LCD_RAM_REGISTER2) || \ + ((__REGISTER__) == LCD_RAM_REGISTER3) || \ + ((__REGISTER__) == LCD_RAM_REGISTER4) || \ + ((__REGISTER__) == LCD_RAM_REGISTER5) || \ + ((__REGISTER__) == LCD_RAM_REGISTER6) || \ + ((__REGISTER__) == LCD_RAM_REGISTER7) || \ + ((__REGISTER__) == LCD_RAM_REGISTER8) || \ + ((__REGISTER__) == LCD_RAM_REGISTER9) || \ + ((__REGISTER__) == LCD_RAM_REGISTER10) || \ + ((__REGISTER__) == LCD_RAM_REGISTER11) || \ + ((__REGISTER__) == LCD_RAM_REGISTER12) || \ + ((__REGISTER__) == LCD_RAM_REGISTER13) || \ + ((__REGISTER__) == LCD_RAM_REGISTER14) || \ + ((__REGISTER__) == LCD_RAM_REGISTER15)) + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ + +/** @defgroup LCD_Exported_Macros LCD Exported Macros + * @{ + */ + +/** @brief Reset LCD handle state + * @param __HANDLE__: specifies the LCD Handle. + * @retval None + */ +#define __HAL_LCD_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_LCD_STATE_RESET) + +/** @brief macros to enables or disables the LCD + * @param __HANDLE__: specifies the LCD Handle. + * @retval None + */ +#define __HAL_LCD_ENABLE(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR, LCD_CR_LCDEN)) +#define __HAL_LCD_DISABLE(__HANDLE__) (CLEAR_BIT((__HANDLE__)->Instance->CR, LCD_CR_LCDEN)) + +/** @brief Macros to enable or disable the low resistance divider. Displays with high + * internal resistance may need a longer drive time to achieve + * satisfactory contrast. This function is useful in this case if some + * additional power consumption can be tolerated. + * @param __HANDLE__: specifies the LCD Handle. + * @note When this mode is enabled, the PulseOn Duration (PON) have to be + * programmed to 1/CK_PS (LCD_PULSEONDURATION_1). + * @retval None + */ +#define __HAL_LCD_HIGHDRIVER_ENABLE(__HANDLE__) \ + do{ \ + SET_BIT((__HANDLE__)->Instance->FCR, LCD_FCR_HD); \ + LCD_WaitForSynchro(__HANDLE__); \ + }while(0) + +#define __HAL_LCD_HIGHDRIVER_DISABLE(__HANDLE__) \ + do{ \ + CLEAR_BIT((__HANDLE__)->Instance->FCR, LCD_FCR_HD); \ + LCD_WaitForSynchro(__HANDLE__); \ + }while(0) + +/** + * @brief Macro to configure the LCD pulses on duration. + * @param __HANDLE__: specifies the LCD Handle. + * @param __DURATION__: specifies the LCD pulse on duration in terms of + * CK_PS (prescaled LCD clock period) pulses. + * This parameter can be one of the following values: + * @arg LCD_PULSEONDURATION_0: 0 pulse + * @arg LCD_PULSEONDURATION_1: Pulse ON duration = 1/CK_PS + * @arg LCD_PULSEONDURATION_2: Pulse ON duration = 2/CK_PS + * @arg LCD_PULSEONDURATION_3: Pulse ON duration = 3/CK_PS + * @arg LCD_PULSEONDURATION_4: Pulse ON duration = 4/CK_PS + * @arg LCD_PULSEONDURATION_5: Pulse ON duration = 5/CK_PS + * @arg LCD_PULSEONDURATION_6: Pulse ON duration = 6/CK_PS + * @arg LCD_PULSEONDURATION_7: Pulse ON duration = 7/CK_PS + * @retval None + */ +#define __HAL_LCD_PULSEONDURATION_CONFIG(__HANDLE__, __DURATION__) \ + do{ \ + MODIFY_REG((__HANDLE__)->Instance->FCR, LCD_FCR_PON, (__DURATION__)); \ + LCD_WaitForSynchro(__HANDLE__); \ + }while(0) + +/** + * @brief Macro to configure the LCD dead time. + * @param __HANDLE__: specifies the LCD Handle. + * @param __DEADTIME__: specifies the LCD dead time. + * This parameter can be one of the following values: + * @arg LCD_DEADTIME_0: No dead Time + * @arg LCD_DEADTIME_1: One Phase between different couple of Frame + * @arg LCD_DEADTIME_2: Two Phase between different couple of Frame + * @arg LCD_DEADTIME_3: Three Phase between different couple of Frame + * @arg LCD_DEADTIME_4: Four Phase between different couple of Frame + * @arg LCD_DEADTIME_5: Five Phase between different couple of Frame + * @arg LCD_DEADTIME_6: Six Phase between different couple of Frame + * @arg LCD_DEADTIME_7: Seven Phase between different couple of Frame + * @retval None + */ +#define __HAL_LCD_DEADTIME_CONFIG(__HANDLE__, __DEADTIME__) \ + do{ \ + MODIFY_REG((__HANDLE__)->Instance->FCR, LCD_FCR_DEAD, (__DEADTIME__)); \ + LCD_WaitForSynchro(__HANDLE__); \ + }while(0) + +/** + * @brief Macro to configure the LCD Contrast. + * @param __HANDLE__: specifies the LCD Handle. + * @param __CONTRAST__: specifies the LCD Contrast. + * This parameter can be one of the following values: + * @arg LCD_CONTRASTLEVEL_0: Maximum Voltage = 2.60V + * @arg LCD_CONTRASTLEVEL_1: Maximum Voltage = 2.73V + * @arg LCD_CONTRASTLEVEL_2: Maximum Voltage = 2.86V + * @arg LCD_CONTRASTLEVEL_3: Maximum Voltage = 2.99V + * @arg LCD_CONTRASTLEVEL_4: Maximum Voltage = 3.12V + * @arg LCD_CONTRASTLEVEL_5: Maximum Voltage = 3.25V + * @arg LCD_CONTRASTLEVEL_6: Maximum Voltage = 3.38V + * @arg LCD_CONTRASTLEVEL_7: Maximum Voltage = 3.51V + * @retval None + */ +#define __HAL_LCD_CONTRAST_CONFIG(__HANDLE__, __CONTRAST__) \ + do{ \ + MODIFY_REG((__HANDLE__)->Instance->FCR, LCD_FCR_CC, (__CONTRAST__)); \ + LCD_WaitForSynchro(__HANDLE__); \ + } while(0) + +/** + * @brief Macro to configure the LCD Blink mode and Blink frequency. + * @param __HANDLE__: specifies the LCD Handle. + * @param __BLINKMODE__: specifies the LCD blink mode. + * This parameter can be one of the following values: + * @arg LCD_BLINKMODE_OFF: Blink disabled + * @arg LCD_BLINKMODE_SEG0_COM0: Blink enabled on SEG[0], COM[0] (1 pixel) + * @arg LCD_BLINKMODE_SEG0_ALLCOM: Blink enabled on SEG[0], all COM (up to 8 + * pixels according to the programmed duty) + * @arg LCD_BLINKMODE_ALLSEG_ALLCOM: Blink enabled on all SEG and all COM + * (all pixels) + * @param __BLINKFREQUENCY__: specifies the LCD blink frequency. + * @arg LCD_BLINKFREQUENCY_DIV8: The Blink frequency = fLcd/8 + * @arg LCD_BLINKFREQUENCY_DIV16: The Blink frequency = fLcd/16 + * @arg LCD_BLINKFREQUENCY_DIV32: The Blink frequency = fLcd/32 + * @arg LCD_BLINKFREQUENCY_DIV64: The Blink frequency = fLcd/64 + * @arg LCD_BLINKFREQUENCY_DIV128: The Blink frequency = fLcd/128 + * @arg LCD_BLINKFREQUENCY_DIV256: The Blink frequency = fLcd/256 + * @arg LCD_BLINKFREQUENCY_DIV512: The Blink frequency = fLcd/512 + * @arg LCD_BLINKFREQUENCY_DIV1024: The Blink frequency = fLcd/1024 + * @retval None + */ +#define __HAL_LCD_BLINK_CONFIG(__HANDLE__, __BLINKMODE__, __BLINKFREQUENCY__) \ + do{ \ + MODIFY_REG((__HANDLE__)->Instance->FCR, (LCD_FCR_BLINKF | LCD_FCR_BLINK), ((__BLINKMODE__) | (__BLINKFREQUENCY__))); \ + LCD_WaitForSynchro(__HANDLE__); \ + }while(0) + +/** @brief Enables or disables the specified LCD interrupt. + * @param __HANDLE__: specifies the LCD Handle. + * @param __INTERRUPT__: specifies the LCD interrupt source to be enabled or disabled. + * This parameter can be one of the following values: + * @arg LCD_IT_SOF: Start of Frame Interrupt + * @arg LCD_IT_UDD: Update Display Done Interrupt + * @retval None + */ +#define __HAL_LCD_ENABLE_IT(__HANDLE__, __INTERRUPT__) \ + do{ \ + SET_BIT((__HANDLE__)->Instance->FCR, (__INTERRUPT__)); \ + LCD_WaitForSynchro(__HANDLE__); \ + }while(0) +#define __HAL_LCD_DISABLE_IT(__HANDLE__, __INTERRUPT__) \ + do{ \ + CLEAR_BIT((__HANDLE__)->Instance->FCR, (__INTERRUPT__)); \ + LCD_WaitForSynchro(__HANDLE__); \ + }while(0) + +/** @brief Checks whether the specified LCD interrupt is enabled or not. + * @param __HANDLE__: specifies the LCD Handle. + * @param __IT__: specifies the LCD interrupt source to check. + * This parameter can be one of the following values: + * @arg LCD_IT_SOF: Start of Frame Interrupt + * @arg LCD_IT_UDD: Update Display Done Interrupt. + * @note If the device is in STOP mode (PCLK not provided) UDD will not + * generate an interrupt even if UDDIE = 1. + * If the display is not enabled the UDD interrupt will never occur. + * @retval The state of __IT__ (TRUE or FALSE). + */ +#define __HAL_LCD_GET_IT_SOURCE(__HANDLE__, __IT__) (((__HANDLE__)->Instance->FCR) & (__IT__)) + +/** @brief Checks whether the specified LCD flag is set or not. + * @param __HANDLE__: specifies the LCD Handle. + * @param __FLAG__: specifies the flag to check. + * This parameter can be one of the following values: + * @arg LCD_FLAG_ENS: LCD Enabled flag. It indicates the LCD controller status. + * @note The ENS bit is set immediately when the LCDEN bit in the LCD_CR + * goes from 0 to 1. On deactivation it reflects the real status of + * LCD so it becomes 0 at the end of the last displayed frame. + * @arg LCD_FLAG_SOF: Start of Frame flag. This flag is set by hardware at + * the beginning of a new frame, at the same time as the display data is + * updated. + * @arg LCD_FLAG_UDR: Update Display Request flag. + * @arg LCD_FLAG_UDD: Update Display Done flag. + * @arg LCD_FLAG_RDY: Step_up converter Ready flag. It indicates the status + * of the step-up converter. + * @arg LCD_FLAG_FCRSF: LCD Frame Control Register Synchronization Flag. + * This flag is set by hardware each time the LCD_FCR register is updated + * in the LCDCLK domain. + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_LCD_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__)) + +/** @brief Clears the specified LCD pending flag. + * @param __HANDLE__: specifies the LCD Handle. + * @param __FLAG__: specifies the flag to clear. + * This parameter can be any combination of the following values: + * @arg LCD_FLAG_SOF: Start of Frame Interrupt + * @arg LCD_FLAG_UDD: Update Display Done Interrupt + * @retval None + */ +#define __HAL_LCD_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->CLR = (__FLAG__)) + +/** + * @} + */ + +/* Exported functions ------------------------------------------------------- */ + +/** @addtogroup LCD_Exported_Functions + * @{ + */ + +/** @addtogroup LCD_Exported_Functions_Group1 + * @{ + */ + +/* Initialization/de-initialization methods **********************************/ +HAL_StatusTypeDef HAL_LCD_DeInit(LCD_HandleTypeDef *hlcd); +HAL_StatusTypeDef HAL_LCD_Init(LCD_HandleTypeDef *hlcd); +void HAL_LCD_MspInit(LCD_HandleTypeDef *hlcd); +void HAL_LCD_MspDeInit(LCD_HandleTypeDef *hlcd); + +/** + * @} + */ + +/** @addtogroup LCD_Exported_Functions_Group2 + * @{ + */ + +/* IO operation methods *******************************************************/ +HAL_StatusTypeDef HAL_LCD_Write(LCD_HandleTypeDef *hlcd, uint32_t RAMRegisterIndex, uint32_t RAMRegisterMask, uint32_t Data); +HAL_StatusTypeDef HAL_LCD_Clear(LCD_HandleTypeDef *hlcd); +HAL_StatusTypeDef HAL_LCD_UpdateDisplayRequest(LCD_HandleTypeDef *hlcd); + +/** + * @} + */ + +/** @addtogroup LCD_Exported_Functions_Group3 + * @{ + */ + +/* Peripheral State methods **************************************************/ +HAL_LCD_StateTypeDef HAL_LCD_GetState(LCD_HandleTypeDef *hlcd); +uint32_t HAL_LCD_GetError(LCD_HandleTypeDef *hlcd); + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup LCD_Private_Functions + * @{ + */ + +/* Private functions ---------------------------------------------------------*/ +HAL_StatusTypeDef LCD_WaitForSynchro(LCD_HandleTypeDef *hlcd); + +/** + * @} + */ + +/** + * @} + */ + +#endif /* STM32L100xB || STM32L100xBA || STM32L100xC ||... || STM32L162xD || STM32L162xE || STM32L162xDX */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32L1xx_HAL_LCD_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_nor.h b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_nor.h new file mode 100755 index 0000000..5fa5ca9 --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_nor.h @@ -0,0 +1,306 @@ +/** + ****************************************************************************** + * @file stm32l1xx_hal_nor.h + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief Header file of NOR HAL module. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L1xx_HAL_NOR_H +#define __STM32L1xx_HAL_NOR_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_ll_fsmc.h" + +/** @addtogroup STM32L1xx_HAL_Driver + * @{ + */ + +#if defined (STM32L151xD) || defined (STM32L152xD) || defined (STM32L162xD) +/** @addtogroup NOR + * @{ + */ + +/** @addtogroup NOR_Private_Constants + * @{ + */ + +/* NOR device IDs addresses */ +#define MC_ADDRESS ((uint16_t)0x0000) +#define DEVICE_CODE1_ADDR ((uint16_t)0x0001) +#define DEVICE_CODE2_ADDR ((uint16_t)0x000E) +#define DEVICE_CODE3_ADDR ((uint16_t)0x000F) + +/* NOR CFI IDs addresses */ +#define CFI1_ADDRESS ((uint16_t)0x10) +#define CFI2_ADDRESS ((uint16_t)0x11) +#define CFI3_ADDRESS ((uint16_t)0x12) +#define CFI4_ADDRESS ((uint16_t)0x13) + +/* NOR operation wait timeout */ +#define NOR_TMEOUT ((uint16_t)0xFFFF) + +/* NOR memory data width */ +#define NOR_MEMORY_8B ((uint8_t)0x0) +#define NOR_MEMORY_16B ((uint8_t)0x1) + +/* NOR memory device read/write start address */ +#define NOR_MEMORY_ADRESS1 FSMC_BANK1_1 +#define NOR_MEMORY_ADRESS2 FSMC_BANK1_2 +#define NOR_MEMORY_ADRESS3 FSMC_BANK1_3 +#define NOR_MEMORY_ADRESS4 FSMC_BANK1_4 + +/** + * @} + */ + +/** @addtogroup NOR_Private_Macros + * @{ + */ + +/** + * @brief NOR memory address shifting. + * @param __NOR_ADDRESS: NOR base address + * @param __NOR_MEMORY_WIDTH_: NOR memory width + * @param __ADDRESS__: NOR memory address + * @retval NOR shifted address value + */ +#define NOR_ADDR_SHIFT(__NOR_ADDRESS, __NOR_MEMORY_WIDTH_, __ADDRESS__) \ + ((uint32_t)(((__NOR_MEMORY_WIDTH_) == NOR_MEMORY_16B)? \ + ((uint32_t)((__NOR_ADDRESS) + (2 * (__ADDRESS__)))): \ + ((uint32_t)((__NOR_ADDRESS) + (__ADDRESS__))))) + +/** + * @brief NOR memory write data to specified address. + * @param __ADDRESS__: NOR memory address + * @param __DATA__: Data to write + * @retval None + */ +#define NOR_WRITE(__ADDRESS__, __DATA__) (*(__IO uint16_t *)((uint32_t)(__ADDRESS__)) = (__DATA__)) + +/** + * @} + */ + +/* Exported typedef ----------------------------------------------------------*/ +/** @defgroup NOR_Exported_Types NOR Exported Types + * @{ + */ + +/** + * @brief HAL SRAM State structures definition + */ +typedef enum +{ + HAL_NOR_STATE_RESET = 0x00, /*!< NOR not yet initialized or disabled */ + HAL_NOR_STATE_READY = 0x01, /*!< NOR initialized and ready for use */ + HAL_NOR_STATE_BUSY = 0x02, /*!< NOR internal processing is ongoing */ + HAL_NOR_STATE_ERROR = 0x03, /*!< NOR error state */ + HAL_NOR_STATE_PROTECTED = 0x04 /*!< NOR NORSRAM device write protected */ +}HAL_NOR_StateTypeDef; + +/** + * @brief FSMC NOR Status typedef + */ +typedef enum +{ + HAL_NOR_STATUS_SUCCESS = 0, + HAL_NOR_STATUS_ONGOING, + HAL_NOR_STATUS_ERROR, + HAL_NOR_STATUS_TIMEOUT +}HAL_NOR_StatusTypeDef; + +/** + * @brief FSMC NOR ID typedef + */ +typedef struct +{ + uint16_t Manufacturer_Code; /*!< Defines the device's manufacturer code used to identify the memory */ + + uint16_t Device_Code1; + + uint16_t Device_Code2; + + uint16_t Device_Code3; /*!< Defines the device's codes used to identify the memory. + These codes can be accessed by performing read operations with specific + control signals and addresses set.They can also be accessed by issuing + an Auto Select command */ +}NOR_IDTypeDef; + +/** + * @brief FSMC NOR CFI typedef + */ +typedef struct +{ + /*!< Defines the information stored in the memory's Common flash interface + which contains a description of various electrical and timing parameters, + density information and functions supported by the memory */ + + uint16_t CFI_1; + + uint16_t CFI_2; + + uint16_t CFI_3; + + uint16_t CFI_4; +}NOR_CFITypeDef; + +/** + * @brief NOR handle Structure definition + */ +typedef struct +{ + FSMC_NORSRAM_TypeDef *Instance; /*!< Register base address */ + + FSMC_NORSRAM_EXTENDED_TypeDef *Extended; /*!< Extended mode register base address */ + + FSMC_NORSRAM_InitTypeDef Init; /*!< NOR device control configuration parameters */ + + HAL_LockTypeDef Lock; /*!< NOR locking object */ + + __IO HAL_NOR_StateTypeDef State; /*!< NOR device access state */ + +}NOR_HandleTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/* Exported macro ------------------------------------------------------------*/ + +/** @defgroup NOR_Exported_macro NOR Exported Macros + * @{ + */ + +/** @brief Reset NOR handle state + * @param __HANDLE__: NOR handle + * @retval None + */ +#define __HAL_NOR_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_NOR_STATE_RESET) + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup NOR_Exported_Functions NOR Exported Functions + * @{ + */ + +/** @addtogroup NOR_Exported_Functions_Group1 + * @{ + */ + +/* Initialization/de-initialization functions **********************************/ +HAL_StatusTypeDef HAL_NOR_Init(NOR_HandleTypeDef *hnor, FSMC_NORSRAM_TimingTypeDef *Timing, FSMC_NORSRAM_TimingTypeDef *ExtTiming); +HAL_StatusTypeDef HAL_NOR_DeInit(NOR_HandleTypeDef *hnor); +void HAL_NOR_MspInit(NOR_HandleTypeDef *hnor); +void HAL_NOR_MspDeInit(NOR_HandleTypeDef *hnor); +void HAL_NOR_MspWait(NOR_HandleTypeDef *hnor, uint32_t Timeout); + +/** + * @} + */ + +/** @addtogroup NOR_Exported_Functions_Group2 + * @{ + */ + +/* I/O operation functions ***************************************************/ +HAL_StatusTypeDef HAL_NOR_Read_ID(NOR_HandleTypeDef *hnor, NOR_IDTypeDef *pNOR_ID); +HAL_StatusTypeDef HAL_NOR_ReturnToReadMode(NOR_HandleTypeDef *hnor); +HAL_StatusTypeDef HAL_NOR_Read(NOR_HandleTypeDef *hnor, uint32_t *pAddress, uint16_t *pData); +HAL_StatusTypeDef HAL_NOR_Program(NOR_HandleTypeDef *hnor, uint32_t *pAddress, uint16_t *pData); + +HAL_StatusTypeDef HAL_NOR_ReadBuffer(NOR_HandleTypeDef *hnor, uint32_t uwAddress, uint16_t *pData, uint32_t uwBufferSize); +HAL_StatusTypeDef HAL_NOR_ProgramBuffer(NOR_HandleTypeDef *hnor, uint32_t uwAddress, uint16_t *pData, uint32_t uwBufferSize); + +HAL_StatusTypeDef HAL_NOR_Erase_Block(NOR_HandleTypeDef *hnor, uint32_t BlockAddress, uint32_t Address); +HAL_StatusTypeDef HAL_NOR_Erase_Chip(NOR_HandleTypeDef *hnor, uint32_t Address); +HAL_StatusTypeDef HAL_NOR_Read_CFI(NOR_HandleTypeDef *hnor, NOR_CFITypeDef *pNOR_CFI); + +/** + * @} + */ + +/** @addtogroup NOR_Exported_Functions_Group3 + * @{ + */ + +/* NOR Control functions *****************************************************/ +HAL_StatusTypeDef HAL_NOR_WriteOperation_Enable(NOR_HandleTypeDef *hnor); +HAL_StatusTypeDef HAL_NOR_WriteOperation_Disable(NOR_HandleTypeDef *hnor); + +/** + * @} + */ + +/** @addtogroup NOR_Exported_Functions_Group4 + * @{ + */ + +/* NOR State functions ********************************************************/ +HAL_NOR_StateTypeDef HAL_NOR_GetState(NOR_HandleTypeDef *hnor); +HAL_NOR_StatusTypeDef HAL_NOR_GetStatus(NOR_HandleTypeDef *hnor, uint32_t Address, uint32_t Timeout); + +/** + * @} + */ + +/** + * @} + */ + + +/** + * @} + */ + +#endif /* STM32L151xD || STM32L152xD || STM32L162xD */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32L1xx_HAL_NOR_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_opamp.h b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_opamp.h new file mode 100755 index 0000000..eb3fa7b --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_opamp.h @@ -0,0 +1,539 @@ +/** + ****************************************************************************** + * @file stm32l1xx_hal_opamp.h + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief Header file of OPAMP HAL module. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L1xx_HAL_OPAMP_H +#define __STM32L1xx_HAL_OPAMP_H + +#ifdef __cplusplus + extern "C" { +#endif + +#if defined (STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined (STM32L151xE) || defined (STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) || defined (STM32L162xC) || defined (STM32L152xC) || defined (STM32L151xC) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_hal_def.h" + +/** @addtogroup STM32L1xx_HAL_Driver + * @{ + */ + +/** @addtogroup OPAMP + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup OPAMP_Exported_Types OPAMP Exported Types + * @{ + */ + +/** + * @brief OPAMP Init structure definition + */ + +typedef struct +{ + uint32_t PowerSupplyRange; /*!< Specifies the power supply range: above or under 2.4V. + This parameter must be a value of @ref OPAMP_PowerSupplyRange + Caution: This parameter is common to all OPAMP instances: a modification of this parameter for the selected OPAMP impacts the other OPAMP instances. */ + + uint32_t PowerMode; /*!< Specifies the power mode Normal or Low-Power. + This parameter must be a value of @ref OPAMP_PowerMode */ + + uint32_t Mode; /*!< Specifies the OPAMP mode + This parameter must be a value of @ref OPAMP_Mode + mode is either Standalone or Follower */ + + uint32_t InvertingInput; /*!< Specifies the inverting input in Standalone mode + - In Standalone mode: i.e when mode is OPAMP_STANDALONE_MODE + This parameter must be a value of @ref OPAMP_InvertingInput + InvertingInput is either VM0 or VM1 + - In Follower mode: i.e when mode is OPAMP_FOLLOWER_MODE + This parameter is Not Applicable */ + + uint32_t NonInvertingInput; /*!< Specifies the non inverting input of the opamp: + This parameter must be a value of @ref OPAMP_NonInvertingInput + Note: Non-inverting input availability depends on OPAMP instance: + OPAMP1: Non-inverting input is either IO0, DAC_Channel1 + OPAMP2: Non-inverting input is either IO0, DAC_Channel1, DAC_Channel2 + OPAMP3: Non-inverting input is either IO0, DAC_Channel2 (OPAMP3 availability depends on STM32L1 devices) */ + + uint32_t UserTrimming; /*!< Specifies the trimming mode + This parameter must be a value of @ref OPAMP_UserTrimming + UserTrimming is either factory or user trimming. + Caution: This parameter is common to all OPAMP instances: a modification of this parameter for the selected OPAMP impacts the other OPAMP instances. */ + + uint32_t TrimmingValueP; /*!< Specifies the offset trimming value (PMOS) + i.e. when UserTrimming is OPAMP_TRIMMING_USER. + This parameter must be a number between Min_Data = 0 and Max_Data = 30 (Trimming value 31 is forbidden) + 16 is typical default value */ + + uint32_t TrimmingValueN; /*!< Specifies the offset trimming value (NMOS) + i.e. when UserTrimming is OPAMP_TRIMMING_USER. + This parameter must be a number between Min_Data = 0 and Max_Data = 30 (Trimming value 31 is forbidden) + 16 is typical default value */ + + uint32_t TrimmingValuePLowPower; /*!< Specifies the offset trimming value (PMOS) + i.e. when UserTrimming is OPAMP_TRIMMING_USER. + This parameter must be a number between Min_Data = 0 and Max_Data = 30 (Trimming value 31 is forbidden) + 16 is typical default value */ + + uint32_t TrimmingValueNLowPower; /*!< Specifies the offset trimming value (NMOS) + i.e. when UserTrimming is OPAMP_TRIMMING_USER. + This parameter must be a number between Min_Data = 0 and Max_Data = 30 (Trimming value 31 is forbidden) + 16 is typical default value */ + +}OPAMP_InitTypeDef; + +/** + * @brief HAL State structures definition + */ + +typedef enum +{ + HAL_OPAMP_STATE_RESET = 0x00000000, /*!< OPMAP is not yet Initialized */ + + HAL_OPAMP_STATE_READY = 0x00000001, /*!< OPAMP is initialized and ready for use */ + HAL_OPAMP_STATE_CALIBBUSY = 0x00000002, /*!< OPAMP is enabled in auto calibration mode */ + + HAL_OPAMP_STATE_BUSY = 0x00000004, /*!< OPAMP is enabled and running in normal mode */ + HAL_OPAMP_STATE_BUSYLOCKED = 0x00000005, /*!< OPAMP is locked + only system reset allows reconfiguring the opamp. */ + +}HAL_OPAMP_StateTypeDef; + +/** + * @brief OPAMP Handle Structure definition + */ +typedef struct +{ + OPAMP_TypeDef *Instance; /*!< OPAMP instance's registers base address */ + OPAMP_InitTypeDef Init; /*!< OPAMP required parameters */ + HAL_StatusTypeDef Status; /*!< OPAMP peripheral status */ + HAL_LockTypeDef Lock; /*!< Locking object */ + __IO HAL_OPAMP_StateTypeDef State; /*!< OPAMP communication state */ + +} OPAMP_HandleTypeDef; + +/** + * @brief HAl_OPAMP_TrimmingValueTypeDef definition + */ + +typedef uint32_t HAL_OPAMP_TrimmingValueTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup OPAMP_Exported_Constants OPAMP Exported Constants + * @{ + */ + +/** + * OTR register Mask + */ +#define OPAMP_TRIM_VALUE_MASK OPAMP_OTR_AO1_OPT_OFFSET_TRIM_LOW + +/** + * CSR register Mask + */ +#define OPAMP_CSR_INSTANCE_OFFSET ((uint32_t) 8) /* Offset of each OPAMP instance into register CSR */ +#define OPAMP_OTR_INSTANCE_OFFSET ((uint32_t) 10) /* Offset of each OPAMP instance into register OTR */ + + +/** @defgroup OPAMP_Mode OPAMP Mode + * @{ + */ +#define OPAMP_STANDALONE_MODE ((uint32_t)0x00000000) /*!< OPAMP standalone mode */ +#define OPAMP_FOLLOWER_MODE ((uint32_t)0x00000001) /*!< OPAMP follower mode */ + +/** + * @} + */ + +/** @defgroup OPAMP_NonInvertingInput OPAMP NonInvertingInput + * @{ + */ +#define OPAMP_NONINVERTINGINPUT_IO0 ((uint32_t)0x00000000) /*!< Comparator non-inverting input connected to dedicated IO pin low-leakage */ +#define OPAMP_NONINVERTINGINPUT_DAC_CH1 ((uint32_t)0x00000001) /*!< Comparator non-inverting input connected internally to DAC channel 1. Available only on OPAMP1 and OPAMP2. */ +#define OPAMP_NONINVERTINGINPUT_DAC_CH2 ((uint32_t)0x00000002) /*!< Comparator non-inverting input connected internally to DAC channel 2. Available only on OPAMP2 and OPAMP3 (OPAMP3 availability depends on STM32L1 devices). */ + +/** + * @} + */ + +/** @defgroup OPAMP_InvertingInput OPAMP InvertingInput + * @{ + */ +/* Note: Literal "OPAMP_SEC_INVERTINGINPUT_IO1" is a legacy naming of "OPAMP_INVERTINGINPUT_IO1". It is equivalent and must be replaced by "OPAMP_INVERTINGINPUT_IO1". */ +#define OPAMP_INVERTINGINPUT_IO0 ((uint32_t)0x00000000) /*!< Comparator inverting input connected to dedicated IO pin low-leakage */ +#define OPAMP_INVERTINGINPUT_IO1 ((uint32_t)0x00000001) /*!< Comparator inverting input connected to alternative IO pin available on some device packages */ + +/** + * @} + */ + +/** @defgroup OPAMP_PowerMode OPAMP PowerMode + * @{ + */ +#define OPAMP_POWERMODE_NORMAL ((uint32_t)0x00000000) +#define OPAMP_POWERMODE_LOWPOWER ((uint32_t)0x00000001) + +/** + * @} + */ + +/** @defgroup OPAMP_PowerSupplyRange OPAMP PowerSupplyRange + * @{ + */ +#define OPAMP_POWERSUPPLY_LOW ((uint32_t)0x00000000) /*!< Power supply range low (VDDA lower than 2.4V) */ +#define OPAMP_POWERSUPPLY_HIGH OPAMP_CSR_AOP_RANGE /*!< Power supply range high (VDDA higher than 2.4V) */ + +/** + * @} + */ + +/** @defgroup OPAMP_UserTrimming OPAMP User Trimming + * @{ + */ +#define OPAMP_TRIMMING_FACTORY ((uint32_t)0x00000000) /*!< Factory trimming */ +#define OPAMP_TRIMMING_USER OPAMP_OTR_OT_USER /*!< User trimming */ + +/** + * @} + */ + +/** @defgroup OPAMP_FactoryTrimming OPAMP FactoryTrimming + * @{ + */ +#define OPAMP_FACTORYTRIMMING_DUMMY ((uint32_t)0xFFFFFFFF) /*!< Dummy value if trimming value could not be retrieved */ + +#define OPAMP_FACTORYTRIMMING_P ((uint32_t)0x00000000) /*!< Offset trimming P */ +#define OPAMP_FACTORYTRIMMING_N POSITION_VAL(OPAMP_OTR_AO1_OPT_OFFSET_TRIM_HIGH) /*!< Offset trimming N */ + +/** + * @} + */ + +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup OPAMP_Private_Constants OPAMP Private Constants + * @{ + */ + +/* Offset trimming time: during calibration, minimum time needed between two */ +/* steps to have 1 mV accuracy. */ +/* Refer to datasheet, electrical characteristics: parameter tOFFTRIM Typ=1ms.*/ +/* Unit: ms. */ +#define OPAMP_TRIMMING_DELAY ((uint32_t) 1) + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ + +/** @defgroup OPAMP_Private_Macro OPAMP Private Macro + * @{ + */ + +/** @brief Reset OPAMP handle state + * @param __HANDLE__: OPAMP handle. + * @retval None + */ +#define __HAL_OPAMP_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_OPAMP_STATE_RESET) + +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ + +/** @defgroup OPAMP_Private_Macro OPAMP Private Macro + * @{ + */ + +/** + * @brief Select the OPAMP bit OPAxPD (power-down) corresponding to the + * selected OPAMP instance. + * @param __HANDLE__: OPAMP handle + * @retval None + */ +#define OPAMP_CSR_OPAXPD(__HANDLE__) \ + (OPAMP_CSR_OPA1PD << (OPAMP_INSTANCE_DECIMAL(__HANDLE__) * OPAMP_CSR_INSTANCE_OFFSET)) + +/** + * @brief Select the OPAMP bit S3SELx (switch 3) corresponding to the + * selected OPAMP instance. + * @param __HANDLE__: OPAMP handle + * @retval None + */ +#define OPAMP_CSR_S3SELX(__HANDLE__) \ + (OPAMP_CSR_S3SEL1 << (OPAMP_INSTANCE_DECIMAL(__HANDLE__) * OPAMP_CSR_INSTANCE_OFFSET)) + +/** + * @brief Select the OPAMP bit S4SELx (switch 4) corresponding to the + * selected OPAMP instance. + * @param __HANDLE__: OPAMP handle + * @retval None + */ +#define OPAMP_CSR_S4SELX(__HANDLE__) \ + (OPAMP_CSR_S4SEL1 << (OPAMP_INSTANCE_DECIMAL(__HANDLE__) * OPAMP_CSR_INSTANCE_OFFSET)) + +/** + * @brief Select the OPAMP bit S5SELx (switch 5) corresponding to the + * selected OPAMP instance. + * @param __HANDLE__: OPAMP handle + * @retval None + */ +#define OPAMP_CSR_S5SELX(__HANDLE__) \ + (OPAMP_CSR_S5SEL1 << (OPAMP_INSTANCE_DECIMAL(__HANDLE__) * OPAMP_CSR_INSTANCE_OFFSET)) + +/** + * @brief Select the OPAMP bit S3SELx (switch 6) corresponding to the + * selected OPAMP instance. + * @param __HANDLE__: OPAMP handle + * @retval None + */ +#define OPAMP_CSR_S6SELX(__HANDLE__) \ + (OPAMP_CSR_S6SEL1 << (OPAMP_INSTANCE_DECIMAL(__HANDLE__) * OPAMP_CSR_INSTANCE_OFFSET)) + +/** + * @brief Select the OPAMP bit OPAxCAL_L (offset calibration for differential + * pair P) corresponding to the selected OPAMP instance. + * @param __HANDLE__: OPAMP handle + * @retval None + */ +#define OPAMP_CSR_OPAXCAL_L(__HANDLE__) \ + (OPAMP_CSR_OPA1CAL_L << (OPAMP_INSTANCE_DECIMAL(__HANDLE__) * OPAMP_CSR_INSTANCE_OFFSET)) + +/** + * @brief Select the OPAMP bit OPAxCAL_H (offset calibration for differential + * pair N) corresponding to the selected OPAMP instance. + * @param __HANDLE__: OPAMP handle + * @retval None + */ +#define OPAMP_CSR_OPAXCAL_H(__HANDLE__) \ + (OPAMP_CSR_OPA1CAL_H << (OPAMP_INSTANCE_DECIMAL(__HANDLE__) * OPAMP_CSR_INSTANCE_OFFSET)) + +/** + * @brief Select the OPAMP bit OPAxLPM (low power mode) corresponding to the + * selected OPAMP instance. + * @param __HANDLE__: OPAMP handle + * @retval None + */ +#define OPAMP_CSR_OPAXLPM(__HANDLE__) \ + (OPAMP_CSR_OPA1LPM << (OPAMP_INSTANCE_DECIMAL(__HANDLE__) * OPAMP_CSR_INSTANCE_OFFSET)) + +/** + * @brief Select the OPAMP bits of all switches corresponding to the + * selected OPAMP instance. + * @param __HANDLE__: OPAMP handle + * @retval None + */ +#define OPAMP_CSR_ALL_SWITCHES(__HANDLE__) \ + ( ( ((__HANDLE__)->Instance != OPAMP2) \ + )? \ + ( \ + ((OPAMP_CSR_S3SEL1 | OPAMP_CSR_S4SEL1 | OPAMP_CSR_S5SEL1 | OPAMP_CSR_S6SEL1) << (OPAMP_INSTANCE_DECIMAL(__HANDLE__) * OPAMP_CSR_INSTANCE_OFFSET)) \ + | \ + (OPAMP_CSR_ANAWSEL1 << (OPAMP_INSTANCE_DECIMAL(__HANDLE__))) \ + ) \ + : \ + ( \ + ((OPAMP_CSR_S3SEL1 | OPAMP_CSR_S4SEL1 | OPAMP_CSR_S5SEL1 | OPAMP_CSR_S6SEL1) << (OPAMP_INSTANCE_DECIMAL(__HANDLE__) * OPAMP_CSR_INSTANCE_OFFSET)) \ + | \ + (OPAMP_CSR_ANAWSEL1 << (OPAMP_INSTANCE_DECIMAL(__HANDLE__))) \ + | \ + (OPAMP_CSR_S7SEL2) \ + ) \ + ) + +/** + * @brief Select the OPAMP bit ANAWSELx (switch SanA) corresponding to the + * selected OPAMP instance. + * @param __HANDLE__: OPAMP handle + * @retval None + */ +#define OPAMP_CSR_ANAWSELX(__HANDLE__) \ + (OPAMP_CSR_ANAWSEL1 << (OPAMP_INSTANCE_DECIMAL(__HANDLE__))) + +/** + * @brief Select the OPAMP bit OPAxCALOUT in function of the selected + * OPAMP instance. + * @param __HANDLE__: OPAMP handle + * @retval None + */ +#define OPAMP_CSR_OPAXCALOUT(__HANDLE__) \ + (OPAMP_CSR_OPA1CALOUT << (OPAMP_INSTANCE_DECIMAL(__HANDLE__))) + +/** + * @brief Select the OPAMP trimming bits position value (position of LSB) + * in register OPAMP_OTR or register OPAMP_LPOTR in function of the selected + * OPAMP instance and the transistors differential pair high (PMOS) or + * low (NMOS). + * @param __HANDLE__: OPAMP handle + * @param __TRIM_HIGH_LOW__: transistors differential pair high or low. + * Must be a value of @ref OPAMP_FactoryTrimming. + * @retval None + */ +#define OPAMP_OFFSET_TRIM_BITSPOSITION(__HANDLE__, __TRIM_HIGH_LOW__) \ + ((OPAMP_INSTANCE_DECIMAL((__HANDLE__)) * OPAMP_OTR_INSTANCE_OFFSET) + (__TRIM_HIGH_LOW__)) + +/** + * @brief Shift the OPAMP trimming bits to register OPAMP_OTR or register + * OPAMP_LPOTR in function of the selected OPAMP instance and the transistors + * differential pair high (PMOS) or low (NMOS). + * @param __HANDLE__: OPAMP handle + * @param __TRIM_HIGH_LOW__: transistors differential pair high or low. + * Must be a value of @ref OPAMP_FactoryTrimming. + * @param __TRIMMING_VALUE__: Trimming value + * @retval None + */ +#define OPAMP_OFFSET_TRIM_SET(__HANDLE__, __TRIM_HIGH_LOW__, __TRIMMING_VALUE__) \ + ((__TRIMMING_VALUE__) << (OPAMP_OFFSET_TRIM_BITSPOSITION((__HANDLE__), (__TRIM_HIGH_LOW__)))) + +/** + * @brief Check that trimming value is within correct range + * @param TRIMMINGVALUE: OPAMP trimming value + * @retval None + */ +#define IS_OPAMP_TRIMMINGVALUE(TRIMMINGVALUE) ((TRIMMINGVALUE) <= 0x1E) + +#define IS_OPAMP_FUNCTIONAL_NORMALMODE(INPUT) (((INPUT) == OPAMP_STANDALONE_MODE) || \ + ((INPUT) == OPAMP_FOLLOWER_MODE)) + +#define IS_OPAMP_INVERTING_INPUT(INPUT) (((INPUT) == OPAMP_INVERTINGINPUT_IO0) || \ + ((INPUT) == OPAMP_INVERTINGINPUT_IO1) ) + +#define IS_OPAMP_POWERMODE(TRIMMING) (((TRIMMING) == OPAMP_POWERMODE_NORMAL) || \ + ((TRIMMING) == OPAMP_POWERMODE_LOWPOWER) ) + +#define IS_OPAMP_POWER_SUPPLY_RANGE(RANGE) (((RANGE) == OPAMP_POWERSUPPLY_LOW) || \ + ((RANGE) == OPAMP_POWERSUPPLY_HIGH) ) + +#define IS_OPAMP_TRIMMING(TRIMMING) (((TRIMMING) == OPAMP_TRIMMING_FACTORY) || \ + ((TRIMMING) == OPAMP_TRIMMING_USER)) + +#define IS_OPAMP_FACTORYTRIMMING(TRIMMING) (((TRIMMING) == OPAMP_FACTORYTRIMMING_N) || \ + ((TRIMMING) == OPAMP_FACTORYTRIMMING_P) ) + +/** + * @} + */ + + +/* Include OPAMP HAL Extension module */ +#include "stm32l1xx_hal_opamp_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup OPAMP_Exported_Functions + * @{ + */ + +/** @addtogroup OPAMP_Exported_Functions_Group1 + * @{ + */ +/* Initialization/de-initialization functions **********************************/ +HAL_StatusTypeDef HAL_OPAMP_Init(OPAMP_HandleTypeDef *hopamp); +HAL_StatusTypeDef HAL_OPAMP_DeInit (OPAMP_HandleTypeDef *hopamp); +void HAL_OPAMP_MspInit(OPAMP_HandleTypeDef *hopamp); +void HAL_OPAMP_MspDeInit(OPAMP_HandleTypeDef *hopamp); +/** + * @} + */ + +/** @addtogroup OPAMP_Exported_Functions_Group2 + * @{ + */ + +/* I/O operation functions *****************************************************/ +HAL_StatusTypeDef HAL_OPAMP_Start(OPAMP_HandleTypeDef *hopamp); +HAL_StatusTypeDef HAL_OPAMP_Stop(OPAMP_HandleTypeDef *hopamp); +HAL_StatusTypeDef HAL_OPAMP_SelfCalibrate(OPAMP_HandleTypeDef *hopamp); +/** + * @} + */ + +/** @addtogroup OPAMP_Exported_Functions_Group3 + * @{ + */ + +/* Peripheral Control functions ************************************************/ +HAL_StatusTypeDef HAL_OPAMP_Lock(OPAMP_HandleTypeDef *hopamp); +HAL_OPAMP_TrimmingValueTypeDef HAL_OPAMP_GetTrimOffset (OPAMP_HandleTypeDef *hopamp, uint32_t trimmingoffset); +/** + * @} + */ + +/** @addtogroup OPAMP_Exported_Functions_Group4 + * @{ + */ + +/* Peripheral State functions **************************************************/ +HAL_OPAMP_StateTypeDef HAL_OPAMP_GetState(OPAMP_HandleTypeDef *hopamp); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX || STM32L162xC || STM32L152xC || STM32L151xC */ +#ifdef __cplusplus +} +#endif + +#endif /* __STM32L1xx_HAL_OPAMP_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_opamp_ex.h b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_opamp_ex.h new file mode 100755 index 0000000..60db9f4 --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_opamp_ex.h @@ -0,0 +1,274 @@ +/** + ****************************************************************************** + * @file stm32l1xx_hal_opamp_ex.h + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief Header file of OPAMP HAL Extension module. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L1xx_HAL_OPAMP_EX_H +#define __STM32L1xx_HAL_OPAMP_EX_H + +#ifdef __cplusplus + extern "C" { +#endif + +#if defined (STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined (STM32L151xE) || defined (STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) || defined (STM32L162xC) || defined (STM32L152xC) || defined (STM32L151xC) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_hal_def.h" + +/** @addtogroup STM32L1xx_HAL_Driver + * @{ + */ + +/** @addtogroup OPAMPEx + * @{ + */ +/* Exported types ------------------------------------------------------------*/ +/* Exported constants ---------------------------------------------------------*/ +/** @defgroup OPAMPEx_Exported_Constants OPAMPEx Exported Constants + * @{ + */ +#if defined (STM32L151xD) || defined (STM32L152xD) || defined (STM32L162xD) +#define OPAMP_CSR_OPAXPD_ALL \ + (OPAMP_CSR_OPA1PD | OPAMP_CSR_OPA2PD | OPAMP_CSR_OPA3PD) + +#define OPAMP_CSR_OPAXCAL_L_ALL \ + (OPAMP_CSR_OPA1CAL_L | OPAMP_CSR_OPA2CAL_L | OPAMP_CSR_OPA3CAL_L) + +#define OPAMP_CSR_OPAXCAL_H_ALL \ + (OPAMP_CSR_OPA1CAL_H | OPAMP_CSR_OPA2CAL_H | OPAMP_CSR_OPA3CAL_H) + +#define OPAMP_CSR_ALL_SWITCHES_ALL_OPAMPS \ + (OPAMP_CSR_S3SEL1 | OPAMP_CSR_S4SEL1 | OPAMP_CSR_S5SEL1 | OPAMP_CSR_S6SEL1 | \ + OPAMP_CSR_ANAWSEL1 | \ + OPAMP_CSR_S3SEL2 | OPAMP_CSR_S4SEL2 | OPAMP_CSR_S5SEL2 | OPAMP_CSR_S6SEL2 | \ + OPAMP_CSR_ANAWSEL2 | OPAMP_CSR_S7SEL2 | \ + OPAMP_CSR_S3SEL3 | OPAMP_CSR_S4SEL3 | OPAMP_CSR_S5SEL3 | OPAMP_CSR_S6SEL3 | \ + OPAMP_CSR_ANAWSEL3 ) +#else +#define OPAMP_CSR_OPAXPD_ALL \ + (OPAMP_CSR_OPA1PD | OPAMP_CSR_OPA2PD) + +#define OPAMP_CSR_OPAXCAL_L_ALL \ + (OPAMP_CSR_OPA1CAL_L | OPAMP_CSR_OPA2CAL_L) + +#define OPAMP_CSR_OPAXCAL_H_ALL \ + (OPAMP_CSR_OPA1CAL_H | OPAMP_CSR_OPA2CAL_H) + +#define OPAMP_CSR_ALL_SWITCHES_ALL_OPAMPS \ + (OPAMP_CSR_S3SEL1 | OPAMP_CSR_S4SEL1 | OPAMP_CSR_S5SEL1 | OPAMP_CSR_S6SEL1 | \ + OPAMP_CSR_ANAWSEL1 | \ + OPAMP_CSR_S3SEL2 | OPAMP_CSR_S4SEL2 | OPAMP_CSR_S5SEL2 | OPAMP_CSR_S6SEL2 | \ + OPAMP_CSR_ANAWSEL2 | OPAMP_CSR_S7SEL2 ) +#endif /* STM32L151xD || STM32L152xD || STM32L162xD */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ + +/** @defgroup OPAMPEx_Exported_Macro OPAMPEx Exported Macro + * @{ + */ + +#if defined (STM32L151xD) || defined (STM32L152xD) || defined (STM32L162xD) +/** + * @brief Enable internal analog switch SW1 to connect OPAMP3 ouput to ADC + * switch matrix (ADC channel VCOMP, channel 26) and COMP1 non-inverting input + * (OPAMP3 available on STM32L1 devices Cat.4 only). + * @retval None + */ +#define __HAL_OPAMP_OPAMP3OUT_CONNECT_ADC_COMP1() __HAL_RI_SWITCH_COMP1_SW1_CLOSE() + +/** + * @brief Disable internal analog switch SW1 to disconnect OPAMP3 ouput from + * ADC switch matrix (ADC channel VCOMP, channel 26) and COMP1 non-inverting + * input. + * @retval None + */ +#define __HAL_OPAMP_OPAMP3OUT_DISCONNECT_ADC_COMP1() __HAL_RI_SWITCH_COMP1_SW1_OPEN() +#endif /* STM32L151xD || STM32L152xD || STM32L162xD */ + +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ + +/** @defgroup OPAMPEx_Private_Macro OPAMPEx Private Macro + * @{ + */ + +#if defined (STM32L151xD) || defined (STM32L152xD) || defined (STM32L162xD) +/** + * @brief Get the OPAMP instance in decimal number for further + * processing needs by HAL OPAMP driver functions. + * @param __HANDLE__: OPAMP handle + * @retval "0" for OPAMP1, "1" for OPAMP2, "2" for OPAMP3 + */ +#define OPAMP_INSTANCE_DECIMAL(__HANDLE__) \ + ( ( ((__HANDLE__)->Instance == OPAMP1) \ + )? \ + ((uint32_t)0) \ + : \ + ( ( ((__HANDLE__)->Instance == OPAMP2) \ + )? \ + ((uint32_t)1) \ + : \ + ((uint32_t)2) \ + ) \ + ) +#else +/** + * @brief Get the OPAMP instance in decimal number for further + * processing needs by HAL OPAMP driver functions. + * @param __HANDLE__: OPAMP handle + * @retval "0" for OPAMP1, "1" for OPAMP2 + */ +#define OPAMP_INSTANCE_DECIMAL(__HANDLE__) \ + ( ( ((__HANDLE__)->Instance == OPAMP1) \ + )? \ + ((uint32_t)0) \ + : \ + ((uint32_t)1) \ + ) +#endif /* STM32L151xD || STM32L152xD || STM32L162xD */ + +#if defined (STM32L151xD) || defined (STM32L152xD) || defined (STM32L162xD) + +/** + * @brief Check OPAMP non-inverting input in function of OPAMPx instance + * @param __HANDLE__: OPAMP handle + * @param INPUT: OPAMP non-inverting input + * @retval None + */ +#define IS_OPAMP_NONINVERTING_INPUT_CHECK_INSTANCE(__HANDLE__, INPUT) \ + ( ( ((__HANDLE__)->Instance == OPAMP1) \ + )? \ + ( \ + ((INPUT) == OPAMP_NONINVERTINGINPUT_IO0) || \ + ((INPUT) == OPAMP_NONINVERTINGINPUT_DAC_CH1) \ + ) \ + : \ + ( ( ((__HANDLE__)->Instance == OPAMP2) \ + )? \ + ( \ + ((INPUT) == OPAMP_NONINVERTINGINPUT_IO0) || \ + ((INPUT) == OPAMP_NONINVERTINGINPUT_DAC_CH1) || \ + ((INPUT) == OPAMP_NONINVERTINGINPUT_DAC_CH2) \ + ) \ + : \ + ( \ + ((INPUT) == OPAMP_NONINVERTINGINPUT_IO0) || \ + ((INPUT) == OPAMP_NONINVERTINGINPUT_DAC_CH2) \ + ) \ + ) \ + ) +#else +/** + * @brief Check OPAMP non-inverting input in function of OPAMPx instance + * @param __HANDLE__: OPAMP handle + * @param INPUT: OPAMP non-inverting input + * @retval None + */ +#define IS_OPAMP_NONINVERTING_INPUT_CHECK_INSTANCE(__HANDLE__, INPUT) \ + ( ( ((__HANDLE__)->Instance == OPAMP1) \ + )? \ + ( \ + ((INPUT) == OPAMP_NONINVERTINGINPUT_IO0) || \ + ((INPUT) == OPAMP_NONINVERTINGINPUT_DAC_CH1) \ + ) \ + : \ + ( \ + ((INPUT) == OPAMP_NONINVERTINGINPUT_IO0) || \ + ((INPUT) == OPAMP_NONINVERTINGINPUT_DAC_CH1) || \ + ((INPUT) == OPAMP_NONINVERTINGINPUT_DAC_CH2) \ + ) \ + ) +#endif /* STM32L151xD || STM32L152xD || STM32L162xD */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup OPAMPEx_Exported_Functions + * @{ + */ + +/* I/O operation functions *****************************************************/ +/** @defgroup OPAMPEx_Exported_Functions_Group1 Extended Input and Output operation functions + * @{ + */ +#if defined (STM32L151xD) || defined (STM32L152xD) || defined (STM32L162xD) +HAL_StatusTypeDef HAL_OPAMPEx_SelfCalibrateAll(OPAMP_HandleTypeDef *hopamp1, OPAMP_HandleTypeDef *hopamp2, OPAMP_HandleTypeDef *hopamp3); +#else +HAL_StatusTypeDef HAL_OPAMPEx_SelfCalibrateAll(OPAMP_HandleTypeDef *hopamp1, OPAMP_HandleTypeDef *hopamp2); +#endif /* STM32L151xD || STM32L152xD || STM32L162xD */ +/** + * @} + */ +/* Peripheral Control functions ************************************************/ +/** @addtogroup OPAMPEx_Exported_Functions_Group2 + * @{ + */ +HAL_StatusTypeDef HAL_OPAMPEx_Unlock(OPAMP_HandleTypeDef *hopamp); +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX || STM32L162xC || STM32L152xC || STM32L151xC */ + +#ifdef __cplusplus +} +#endif + + +#endif /* __STM32L1xx_HAL_OPAMP_EX_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_pcd.h b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_pcd.h new file mode 100755 index 0000000..feb5549 --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_pcd.h @@ -0,0 +1,856 @@ +/** + ****************************************************************************** + * @file stm32l1xx_hal_pcd.h + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief Header file of PCD HAL module. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L1xx_HAL_PCD_H +#define __STM32L1xx_HAL_PCD_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_hal_def.h" + +/** @addtogroup STM32L1xx_HAL_Driver + * @{ + */ + +/** @addtogroup PCD + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup PCD_Exported_Types PCD Exported Types + * @{ + */ + + /** + * @brief PCD State structure definition + */ +typedef enum +{ + HAL_PCD_STATE_RESET = 0x00, + HAL_PCD_STATE_READY = 0x01, + HAL_PCD_STATE_ERROR = 0x02, + HAL_PCD_STATE_BUSY = 0x03, + HAL_PCD_STATE_TIMEOUT = 0x04 +} PCD_StateTypeDef; + +/** + * @brief PCD double buffered endpoint direction + */ +typedef enum +{ + PCD_EP_DBUF_OUT, + PCD_EP_DBUF_IN, + PCD_EP_DBUF_ERR, +}PCD_EP_DBUF_DIR; + +/** + * @brief PCD endpoint buffer number + */ +typedef enum +{ + PCD_EP_NOBUF, + PCD_EP_BUF0, + PCD_EP_BUF1 +}PCD_EP_BUF_NUM; + +/** + * @brief PCD Initialization Structure definition + */ +typedef struct +{ + uint32_t dev_endpoints; /*!< Device Endpoints number. + This parameter depends on the used USB core. + This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ + + uint32_t speed; /*!< USB Core speed. + This parameter can be any value of @ref PCD_Core_Speed */ + + uint32_t ep0_mps; /*!< Set the Endpoint 0 Max Packet size. + This parameter can be any value of @ref PCD_EP0_MPS */ + + uint32_t phy_itface; /*!< Select the used PHY interface. + This parameter can be any value of @ref PCD_Core_PHY */ + + uint32_t Sof_enable; /*!< Enable or disable the output of the SOF signal. + This parameter can be set to ENABLE or DISABLE */ + + uint32_t low_power_enable; /*!< Enable or disable Low Power mode + This parameter can be set to ENABLE or DISABLE */ + + uint32_t lpm_enable; /*!< Enable or disable the Link Power Management . + This parameter can be set to ENABLE or DISABLE */ + + uint32_t battery_charging_enable; /*!< Enable or disable Battery charging. + This parameter can be set to ENABLE or DISABLE */ + +}PCD_InitTypeDef; + +typedef struct +{ + uint8_t num; /*!< Endpoint number + This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ + + uint8_t is_in; /*!< Endpoint direction + This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ + + uint8_t is_stall; /*!< Endpoint stall condition + This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ + + uint8_t type; /*!< Endpoint type + This parameter can be any value of @ref PCD_EP_Type */ + + uint16_t pmaadress; /*!< PMA Address + This parameter can be any value between Min_addr = 0 and Max_addr = 1K */ + + + uint16_t pmaaddr0; /*!< PMA Address0 + This parameter can be any value between Min_addr = 0 and Max_addr = 1K */ + + + uint16_t pmaaddr1; /*!< PMA Address1 + This parameter can be any value between Min_addr = 0 and Max_addr = 1K */ + + + uint8_t doublebuffer; /*!< Double buffer enable + This parameter can be 0 or 1 */ + + uint32_t maxpacket; /*!< Endpoint Max packet size + This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */ + + uint8_t *xfer_buff; /*!< Pointer to transfer buffer */ + + + uint32_t xfer_len; /*!< Current transfer length */ + + uint32_t xfer_count; /*!< Partial transfer length in case of multi packet transfer */ + +}PCD_EPTypeDef; + +typedef USB_TypeDef PCD_TypeDef; + +/** + * @brief PCD Handle Structure definition + */ +typedef struct +{ + PCD_TypeDef *Instance; /*!< Register base address */ + PCD_InitTypeDef Init; /*!< PCD required parameters */ + __IO uint8_t USB_Address; /*!< USB Address */ + PCD_EPTypeDef IN_ep[8]; /*!< IN endpoint parameters */ + PCD_EPTypeDef OUT_ep[8]; /*!< OUT endpoint parameters */ + HAL_LockTypeDef Lock; /*!< PCD peripheral status */ + __IO PCD_StateTypeDef State; /*!< PCD communication state */ + uint32_t Setup[12]; /*!< Setup packet buffer */ + void *pData; /*!< Pointer to upper stack Handler */ + +} PCD_HandleTypeDef; + +/** + * @} + */ + +/* Include PCD HAL Extension module */ +#include "stm32l1xx_hal_pcd_ex.h" +/* Exported constants --------------------------------------------------------*/ +/** @defgroup PCD_Exported_Constants PCD Exported Constants + * @{ + */ + +/** @defgroup PCD_Exti_Line_Wakeup PCD_Exti_Line_Wakeup + * @{ + */ + +#define USB_WAKEUP_EXTI_LINE ((uint32_t)0x00040000) /*!< External interrupt line 18 Connected to the USB FS EXTI Line */ +/** + * @} + */ + + +/** @defgroup PCD_Core_Speed PCD Core Speed + * @{ + */ +#define PCD_SPEED_HIGH 0 /* Not Supported */ +#define PCD_SPEED_FULL 2 +/** + * @} + */ + + /** @defgroup PCD_Core_PHY PCD Core PHY + * @{ + */ +#define PCD_PHY_EMBEDDED 2 +/** + * @} + */ + +/** @defgroup PCD_EP0_MPS PCD EP0 MPS + * @{ + */ +#define DEP0CTL_MPS_64 0 +#define DEP0CTL_MPS_32 1 +#define DEP0CTL_MPS_16 2 +#define DEP0CTL_MPS_8 3 + +#define PCD_EP0MPS_64 DEP0CTL_MPS_64 +#define PCD_EP0MPS_32 DEP0CTL_MPS_32 +#define PCD_EP0MPS_16 DEP0CTL_MPS_16 +#define PCD_EP0MPS_08 DEP0CTL_MPS_8 +/** + * @} + */ + +/** @defgroup PCD_EP_Type PCD EP Type + * @{ + */ +#define PCD_EP_TYPE_CTRL 0 +#define PCD_EP_TYPE_ISOC 1 +#define PCD_EP_TYPE_BULK 2 +#define PCD_EP_TYPE_INTR 3 +/** + * @} + */ + +/** @defgroup PCD_ENDP PCD ENDP + * @{ + */ + +#define PCD_ENDP0 ((uint8_t)0) +#define PCD_ENDP1 ((uint8_t)1) +#define PCD_ENDP2 ((uint8_t)2) +#define PCD_ENDP3 ((uint8_t)3) +#define PCD_ENDP4 ((uint8_t)4) +#define PCD_ENDP5 ((uint8_t)5) +#define PCD_ENDP6 ((uint8_t)6) +#define PCD_ENDP7 ((uint8_t)7) + +#define IS_PCD_ALL_INSTANCE IS_USB_ALL_INSTANCE + +/** + * @} + */ + +/** @defgroup PCD_ENDP_Kind PCD Endpoint Kind + * @{ + */ +#define PCD_SNG_BUF 0 +#define PCD_DBL_BUF 1 +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ + +/** @defgroup PCD_Exported_Macros PCD Exported Macros + * @brief macros to handle interrupts and specific clock configurations + * @{ + */ +#define __HAL_PCD_GET_FLAG(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->ISTR) & (__INTERRUPT__)) == (__INTERRUPT__)) +#define __HAL_PCD_CLEAR_FLAG(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->ISTR) &= ~(__INTERRUPT__)) + +#define __HAL_USB_WAKEUP_EXTI_ENABLE_IT() EXTI->IMR |= USB_WAKEUP_EXTI_LINE +#define __HAL_USB_WAKEUP_EXTI_DISABLE_IT() EXTI->IMR &= ~(USB_WAKEUP_EXTI_LINE) +#define __HAL_USB_WAKEUP_EXTI_GET_FLAG() EXTI->PR & (USB_WAKEUP_EXTI_LINE) +#define __HAL_USB_WAKEUP_EXTI_CLEAR_FLAG() EXTI->PR = USB_WAKEUP_EXTI_LINE + +#define __HAL_USB_WAKEUP_EXTI_ENABLE_RISING_EDGE() \ + do{ \ + EXTI->FTSR &= ~(USB_WAKEUP_EXTI_LINE); \ + EXTI->RTSR |= USB_WAKEUP_EXTI_LINE; \ + } while(0) + + +#define __HAL_USB_WAKEUP_EXTI_ENABLE_FALLING_EDGE() \ + do{ \ + EXTI->FTSR |= (USB_WAKEUP_EXTI_LINE); \ + EXTI->RTSR &= ~(USB_WAKEUP_EXTI_LINE); \ + } while(0) + + +#define __HAL_USB_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE() \ + do{ \ + EXTI->RTSR &= ~(USB_WAKEUP_EXTI_LINE); \ + EXTI->FTSR &= ~(USB_WAKEUP_EXTI_LINE); \ + EXTI->RTSR |= USB_WAKEUP_EXTI_LINE; \ + EXTI->FTSR |= USB_WAKEUP_EXTI_LINE; \ + } while(0) + +/** + * @} + */ + +/* Internal macros -----------------------------------------------------------*/ + +/** @defgroup PCD_Private_Macros PCD Private Macros + * @brief macros to handle interrupts and specific clock configurations + * @{ + */ + +/* SetENDPOINT */ +#define PCD_SET_ENDPOINT(USBx, bEpNum,wRegValue) (*(&(USBx)->EP0R + (bEpNum) * 2)= (uint16_t)(wRegValue)) + +/* GetENDPOINT */ +#define PCD_GET_ENDPOINT(USBx, bEpNum) (*(&(USBx)->EP0R + (bEpNum) * 2)) + + + +/** + * @brief sets the type in the endpoint register(bits EP_TYPE[1:0]) + * @param USBx: USB peripheral instance register address. + * @param bEpNum: Endpoint Number. + * @param wType: Endpoint Type. + * @retval None + */ +#define PCD_SET_EPTYPE(USBx, bEpNum,wType) (PCD_SET_ENDPOINT((USBx), (bEpNum),\ + ((PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EP_T_MASK) | (wType) ))) + +/** + * @brief gets the type in the endpoint register(bits EP_TYPE[1:0]) + * @param USBx: USB peripheral instance register address. + * @param bEpNum: Endpoint Number. + * @retval Endpoint Type + */ +#define PCD_GET_EPTYPE(USBx, bEpNum) (PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EP_T_FIELD) + + +/** + * @brief free buffer used from the application realizing it to the line + toggles bit SW_BUF in the double buffered endpoint register + * @param USBx: USB peripheral instance register address. + * @param bEpNum: Endpoint Number. + * @param bDir: Direction + * @retval None + */ +#define PCD_FreeUserBuffer(USBx, bEpNum, bDir)\ +{\ + if ((bDir) == PCD_EP_DBUF_OUT)\ + { /* OUT double buffered endpoint */\ + PCD_TX_DTOG((USBx), (bEpNum));\ + }\ + else if ((bDir) == PCD_EP_DBUF_IN)\ + { /* IN double buffered endpoint */\ + PCD_RX_DTOG((USBx), (bEpNum));\ + }\ +} + +/** + * @brief gets direction of the double buffered endpoint + * @param USBx: USB peripheral instance register address. + * @param bEpNum: Endpoint Number. + * @retval EP_DBUF_OUT, EP_DBUF_IN, + * EP_DBUF_ERR if the endpoint counter not yet programmed. + */ +#define PCD_GET_DB_DIR(USBx, bEpNum)\ +{\ + if ((uint16_t)(*PCD_EP_RX_CNT((USBx), (bEpNum)) & 0xFC00) != 0)\ + return(PCD_EP_DBUF_OUT);\ + else if (((uint16_t)(*PCD_EP_TX_CNT((USBx), (bEpNum))) & 0x03FF) != 0)\ + return(PCD_EP_DBUF_IN);\ + else\ + return(PCD_EP_DBUF_ERR);\ +} + +/** + * @brief sets the status for tx transfer (bits STAT_TX[1:0]). + * @param USBx: USB peripheral instance register address. + * @param bEpNum: Endpoint Number. + * @param wState: new state + * @retval None + */ +#define PCD_SET_EP_TX_STATUS(USBx, bEpNum, wState) { register uint16_t _wRegVal;\ + \ + _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPTX_DTOGMASK;\ + /* toggle first bit ? */ \ + if((USB_EPTX_DTOG1 & (wState))!= 0) \ + { \ + _wRegVal ^= USB_EPTX_DTOG1; \ + } \ + /* toggle second bit ? */ \ + if((USB_EPTX_DTOG2 & (wState))!= 0) \ + { \ + _wRegVal ^= USB_EPTX_DTOG2; \ + } \ + PCD_SET_ENDPOINT((USBx), (bEpNum), (_wRegVal | USB_EP_CTR_RX|USB_EP_CTR_TX)); \ + } /* PCD_SET_EP_TX_STATUS */ + +/** + * @brief sets the status for rx transfer (bits STAT_TX[1:0]) + * @param USBx: USB peripheral instance register address. + * @param bEpNum: Endpoint Number. + * @param wState: new state + * @retval None + */ +#define PCD_SET_EP_RX_STATUS(USBx, bEpNum,wState) {\ + register uint16_t _wRegVal; \ + \ + _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPRX_DTOGMASK;\ + /* toggle first bit ? */ \ + if((USB_EPRX_DTOG1 & (wState))!= 0) \ + { \ + _wRegVal ^= USB_EPRX_DTOG1; \ + } \ + /* toggle second bit ? */ \ + if((USB_EPRX_DTOG2 & (wState))!= 0) \ + { \ + _wRegVal ^= USB_EPRX_DTOG2; \ + } \ + PCD_SET_ENDPOINT((USBx), (bEpNum), (_wRegVal | USB_EP_CTR_RX|USB_EP_CTR_TX)); \ + } /* PCD_SET_EP_RX_STATUS */ + +/** + * @brief sets the status for rx & tx (bits STAT_TX[1:0] & STAT_RX[1:0]) + * @param USBx: USB peripheral instance register address. + * @param bEpNum: Endpoint Number. + * @param wStaterx: new state. + * @param wStatetx: new state. + * @retval None + */ +#define PCD_SET_EP_TXRX_STATUS(USBx,bEpNum,wStaterx,wStatetx) {\ + register uint32_t _wRegVal; \ + \ + _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & (USB_EPRX_DTOGMASK |USB_EPTX_STAT) ;\ + /* toggle first bit ? */ \ + if((USB_EPRX_DTOG1 & ((wStaterx)))!= 0) \ + { \ + _wRegVal ^= USB_EPRX_DTOG1; \ + } \ + /* toggle second bit ? */ \ + if((USB_EPRX_DTOG2 & (wStaterx))!= 0) \ + { \ + _wRegVal ^= USB_EPRX_DTOG2; \ + } \ + /* toggle first bit ? */ \ + if((USB_EPTX_DTOG1 & (wStatetx))!= 0) \ + { \ + _wRegVal ^= USB_EPTX_DTOG1; \ + } \ + /* toggle second bit ? */ \ + if((USB_EPTX_DTOG2 & (wStatetx))!= 0) \ + { \ + _wRegVal ^= USB_EPTX_DTOG2; \ + } \ + PCD_SET_ENDPOINT((USBx), (bEpNum), _wRegVal | USB_EP_CTR_RX|USB_EP_CTR_TX); \ + } /* PCD_SET_EP_TXRX_STATUS */ + +/** + * @brief gets the status for tx/rx transfer (bits STAT_TX[1:0] + * /STAT_RX[1:0]) + * @param USBx: USB peripheral instance register address. + * @param bEpNum: Endpoint Number. + * @retval status + */ +#define PCD_GET_EP_TX_STATUS(USBx, bEpNum) ((uint16_t)PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPTX_STAT) + +#define PCD_GET_EP_RX_STATUS(USBx, bEpNum) ((uint16_t)PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPRX_STAT) + +/** + * @brief sets directly the VALID tx/rx-status into the endpoint register + * @param USBx: USB peripheral instance register address. + * @param bEpNum: Endpoint Number. + * @retval None + */ +#define PCD_SET_EP_TX_VALID(USBx, bEpNum) (PCD_SET_EP_TX_STATUS((USBx), (bEpNum), USB_EP_TX_VALID)) + +#define PCD_SET_EP_RX_VALID(USBx, bEpNum) (PCD_SET_EP_RX_STATUS((USBx), (bEpNum), USB_EP_RX_VALID)) + +/** + * @brief checks stall condition in an endpoint. + * @param USBx: USB peripheral instance register address. + * @param bEpNum: Endpoint Number. + * @retval TRUE = endpoint in stall condition. + */ +#define PCD_GET_EP_TX_STALL_STATUS(USBx, bEpNum) (PCD_GET_EP_TX_STATUS((USBx), (bEpNum)) \ + == USB_EP_TX_STALL) +#define PCD_GET_EP_RX_STALL_STATUS(USBx, bEpNum) (PCD_GET_EP_RX_STATUS((USBx), (bEpNum)) \ + == USB_EP_RX_STALL) + +/** + * @brief set & clear EP_KIND bit. + * @param USBx: USB peripheral instance register address. + * @param bEpNum: Endpoint Number. + * @retval None + */ +#define PCD_SET_EP_KIND(USBx, bEpNum) (PCD_SET_ENDPOINT((USBx), (bEpNum), \ + (USB_EP_CTR_RX|USB_EP_CTR_TX|((PCD_GET_ENDPOINT((USBx), (bEpNum)) | USB_EP_KIND) & USB_EPREG_MASK)))) +#define PCD_CLEAR_EP_KIND(USBx, bEpNum) (PCD_SET_ENDPOINT((USBx), (bEpNum), \ + (USB_EP_CTR_RX|USB_EP_CTR_TX|(PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPKIND_MASK)))) + +/** + * @brief Sets/clears directly STATUS_OUT bit in the endpoint register. + * @param USBx: USB peripheral instance register address. + * @param bEpNum: Endpoint Number. + * @retval None + */ +#define PCD_SET_OUT_STATUS(USBx, bEpNum) PCD_SET_EP_KIND((USBx), (bEpNum)) +#define PCD_CLEAR_OUT_STATUS(USBx, bEpNum) PCD_CLEAR_EP_KIND((USBx), (bEpNum)) + +/** + * @brief Sets/clears directly EP_KIND bit in the endpoint register. + * @param USBx: USB peripheral instance register address. + * @param bEpNum: Endpoint Number. + * @retval None + */ +#define PCD_SET_EP_DBUF(USBx, bEpNum) PCD_SET_EP_KIND((USBx), (bEpNum)) +#define PCD_CLEAR_EP_DBUF(USBx, bEpNum) PCD_CLEAR_EP_KIND((USBx), (bEpNum)) + +/** + * @brief Clears bit CTR_RX / CTR_TX in the endpoint register. + * @param USBx: USB peripheral instance register address. + * @param bEpNum: Endpoint Number. + * @retval None + */ +#define PCD_CLEAR_RX_EP_CTR(USBx, bEpNum) (PCD_SET_ENDPOINT((USBx), (bEpNum),\ + PCD_GET_ENDPOINT((USBx), (bEpNum)) & 0x7FFF & USB_EPREG_MASK)) +#define PCD_CLEAR_TX_EP_CTR(USBx, bEpNum) (PCD_SET_ENDPOINT((USBx), (bEpNum),\ + PCD_GET_ENDPOINT((USBx), (bEpNum)) & 0xFF7F & USB_EPREG_MASK)) + +/** + * @brief Toggles DTOG_RX / DTOG_TX bit in the endpoint register. + * @param USBx: USB peripheral instance register address. + * @param bEpNum: Endpoint Number. + * @retval None + */ +#define PCD_RX_DTOG(USBx, bEpNum) (PCD_SET_ENDPOINT((USBx), (bEpNum), \ + USB_EP_CTR_RX|USB_EP_CTR_TX|USB_EP_DTOG_RX | (PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPREG_MASK))) +#define PCD_TX_DTOG(USBx, bEpNum) (PCD_SET_ENDPOINT((USBx), (bEpNum), \ + USB_EP_CTR_RX|USB_EP_CTR_TX|USB_EP_DTOG_TX | (PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPREG_MASK))) + +/** + * @brief Clears DTOG_RX / DTOG_TX bit in the endpoint register. + * @param USBx: USB peripheral instance register address. + * @param bEpNum: Endpoint Number. + * @retval None + */ +#define PCD_CLEAR_RX_DTOG(USBx, bEpNum) if((PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EP_DTOG_RX) != 0)\ + { \ + PCD_RX_DTOG((USBx), (bEpNum)); \ + } +#define PCD_CLEAR_TX_DTOG(USBx, bEpNum) if((PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EP_DTOG_TX) != 0)\ + { \ + PCD_TX_DTOG((USBx), (bEpNum)); \ + } + +/** + * @brief Sets address in an endpoint register. + * @param USBx: USB peripheral instance register address. + * @param bEpNum: Endpoint Number. + * @param bAddr: Address. + * @retval None + */ +#define PCD_SET_EP_ADDRESS(USBx, bEpNum,bAddr) PCD_SET_ENDPOINT((USBx), (bEpNum),\ + USB_EP_CTR_RX|USB_EP_CTR_TX|(PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPREG_MASK) | (bAddr)) + +#define PCD_GET_EP_ADDRESS(USBx, bEpNum) ((uint8_t)(PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPADDR_FIELD)) + +#define PCD_EP_TX_ADDRESS(USBx, bEpNum) ((uint32_t *)(((USBx)->BTABLE+(bEpNum)*8)*2+ ((uint32_t)(USBx) + 0x400))) +#define PCD_EP_TX_CNT(USBx, bEpNum) ((uint32_t *)(((USBx)->BTABLE+(bEpNum)*8+2)*2+ ((uint32_t)(USBx) + 0x400))) +#define PCD_EP_RX_ADDRESS(USBx, bEpNum) ((uint32_t *)(((USBx)->BTABLE+(bEpNum)*8+4)*2+ ((uint32_t)(USBx) + 0x400))) +#define PCD_EP_RX_CNT(USBx, bEpNum) ((uint32_t *)(((USBx)->BTABLE+(bEpNum)*8+6)*2+ ((uint32_t)(USBx) + 0x400))) + +#define PCD_SET_EP_RX_CNT(USBx, bEpNum,wCount) {\ + uint32_t *pdwReg = PCD_EP_RX_CNT((USBx), (bEpNum)); \ + PCD_SET_EP_CNT_RX_REG(pdwReg, (wCount));\ + } + +/** + * @brief sets address of the tx/rx buffer. + * @param USBx: USB peripheral instance register address. + * @param bEpNum: Endpoint Number. + * @param wAddr: address to be set (must be word aligned). + * @retval None + */ +#define PCD_SET_EP_TX_ADDRESS(USBx, bEpNum,wAddr) (*PCD_EP_TX_ADDRESS((USBx), (bEpNum)) = (((wAddr) >> 1) << 1)) +#define PCD_SET_EP_RX_ADDRESS(USBx, bEpNum,wAddr) (*PCD_EP_RX_ADDRESS((USBx), (bEpNum)) = (((wAddr) >> 1) << 1)) + +/** + * @brief Gets address of the tx/rx buffer. + * @param USBx: USB peripheral instance register address. + * @param bEpNum: Endpoint Number. + * @retval address of the buffer. + */ +#define PCD_GET_EP_TX_ADDRESS(USBx, bEpNum) ((uint16_t)*PCD_EP_TX_ADDRESS((USBx), (bEpNum))) +#define PCD_GET_EP_RX_ADDRESS(USBx, bEpNum) ((uint16_t)*PCD_EP_RX_ADDRESS((USBx), (bEpNum))) + +/** + * @brief Sets counter of rx buffer with no. of blocks. + * @param dwReg: Register + * @param wCount: Counter. + * @param wNBlocks: no. of Blocks. + * @retval None + */ +#define PCD_CALC_BLK32(dwReg,wCount,wNBlocks) {\ + (wNBlocks) = (wCount) >> 5;\ + if(((wCount) & 0x1f) == 0)\ + { \ + (wNBlocks)--;\ + } \ + *pdwReg = (uint16_t)((uint16_t)((wNBlocks) << 10) | 0x8000); \ + }/* PCD_CALC_BLK32 */ + +#define PCD_CALC_BLK2(dwReg,wCount,wNBlocks) {\ + (wNBlocks) = (wCount) >> 1;\ + if(((wCount) & 0x1) != 0)\ + { \ + (wNBlocks)++;\ + } \ + *pdwReg = (uint16_t)((wNBlocks) << 10);\ + }/* PCD_CALC_BLK2 */ + +#define PCD_SET_EP_CNT_RX_REG(dwReg,wCount) {\ + uint16_t wNBlocks;\ + if((wCount) > 62) \ + { \ + PCD_CALC_BLK32((dwReg),(wCount),wNBlocks); \ + } \ + else \ + { \ + PCD_CALC_BLK2((dwReg),(wCount),wNBlocks); \ + } \ + }/* PCD_SET_EP_CNT_RX_REG */ + +#define PCD_SET_EP_RX_DBUF0_CNT(USBx, bEpNum,wCount) {\ + uint32_t *pdwReg = PCD_EP_TX_CNT((USBx), (bEpNum)); \ + PCD_SET_EP_CNT_RX_REG(pdwReg, (wCount));\ + } +/** + * @brief sets counter for the tx/rx buffer. + * @param USBx: USB peripheral instance register address. + * @param bEpNum: Endpoint Number. + * @param wCount: Counter value. + * @retval None + */ +#define PCD_SET_EP_TX_CNT(USBx, bEpNum,wCount) (*PCD_EP_TX_CNT((USBx), (bEpNum)) = (wCount)) + + +/** + * @brief gets counter of the tx buffer. + * @param USBx: USB peripheral instance register address. + * @param bEpNum: Endpoint Number. + * @retval Counter value + */ +#define PCD_GET_EP_TX_CNT(USBx, bEpNum)((uint16_t)(*PCD_EP_TX_CNT((USBx), (bEpNum))) & 0x3ff) +#define PCD_GET_EP_RX_CNT(USBx, bEpNum)((uint16_t)(*PCD_EP_RX_CNT((USBx), (bEpNum))) & 0x3ff) + +/** + * @brief Sets buffer 0/1 address in a double buffer endpoint. + * @param USBx: USB peripheral instance register address. + * @param bEpNum: Endpoint Number. + * @param wBuf0Addr: buffer 0 address. + * @retval Counter value + */ +#define PCD_SET_EP_DBUF0_ADDR(USBx, bEpNum,wBuf0Addr) {PCD_SET_EP_TX_ADDRESS((USBx), (bEpNum), (wBuf0Addr));} +#define PCD_SET_EP_DBUF1_ADDR(USBx, bEpNum,wBuf1Addr) {PCD_SET_EP_RX_ADDRESS((USBx), (bEpNum), (wBuf1Addr));} + +/** + * @brief Sets addresses in a double buffer endpoint. + * @param USBx: USB peripheral instance register address. + * @param bEpNum: Endpoint Number. + * @param wBuf0Addr: buffer 0 address. + * @param wBuf1Addr = buffer 1 address. + * @retval None + */ +#define PCD_SET_EP_DBUF_ADDR(USBx, bEpNum,wBuf0Addr,wBuf1Addr) { \ + PCD_SET_EP_DBUF0_ADDR((USBx), (bEpNum), (wBuf0Addr));\ + PCD_SET_EP_DBUF1_ADDR((USBx), (bEpNum), (wBuf1Addr));\ + } /* PCD_SET_EP_DBUF_ADDR */ + +/** + * @brief Gets buffer 0/1 address of a double buffer endpoint. + * @param USBx: USB peripheral instance register address. + * @param bEpNum: Endpoint Number. + * @retval None + */ +#define PCD_GET_EP_DBUF0_ADDR(USBx, bEpNum) (PCD_GET_EP_TX_ADDRESS((USBx), (bEpNum))) +#define PCD_GET_EP_DBUF1_ADDR(USBx, bEpNum) (PCD_GET_EP_RX_ADDRESS((USBx), (bEpNum))) + +/** + * @brief Gets buffer 0/1 address of a double buffer endpoint. + * @param USBx: USB peripheral instance register address. + * @param bEpNum: Endpoint Number. + * @param bDir: endpoint dir EP_DBUF_OUT = OUT + * EP_DBUF_IN = IN + * @param wCount: Counter value + * @retval None + */ +#define PCD_SET_EP_DBUF0_CNT(USBx, bEpNum, bDir, wCount) { \ + if((bDir) == PCD_EP_DBUF_OUT)\ + /* OUT endpoint */ \ + {PCD_SET_EP_RX_DBUF0_CNT((USBx), (bEpNum),(wCount));} \ + else if((bDir) == PCD_EP_DBUF_IN)\ + /* IN endpoint */ \ + *PCD_EP_TX_CNT((USBx), (bEpNum)) = (uint32_t)(wCount); \ + } /* SetEPDblBuf0Count*/ + +#define PCD_SET_EP_DBUF1_CNT(USBx, bEpNum, bDir, wCount) { \ + if((bDir) == PCD_EP_DBUF_OUT)\ + {/* OUT endpoint */ \ + PCD_SET_EP_RX_CNT((USBx), (bEpNum),(wCount)); \ + } \ + else if((bDir) == PCD_EP_DBUF_IN)\ + {/* IN endpoint */ \ + *PCD_EP_TX_CNT((USBx), (bEpNum)) = (uint32_t)(wCount); \ + } \ + } /* SetEPDblBuf1Count */ + +#define PCD_SET_EP_DBUF_CNT(USBx, bEpNum, bDir, wCount) {\ + PCD_SET_EP_DBUF0_CNT((USBx), (bEpNum), (bDir), (wCount)); \ + PCD_SET_EP_DBUF1_CNT((USBx), (bEpNum), (bDir), (wCount)); \ + } /* PCD_SET_EP_DBUF_CNT */ + +/** + * @brief Gets buffer 0/1 rx/tx counter for double buffering. + * @param USBx: USB peripheral instance register address. + * @param bEpNum: Endpoint Number. + * @retval None + */ +#define PCD_GET_EP_DBUF0_CNT(USBx, bEpNum) (PCD_GET_EP_TX_CNT((USBx), (bEpNum))) +#define PCD_GET_EP_DBUF1_CNT(USBx, bEpNum) (PCD_GET_EP_RX_CNT((USBx), (bEpNum))) + + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup PCD_Exported_Functions + * @{ + */ + +/* Initialization/de-initialization functions **********************************/ + + +/** @addtogroup PCD_Exported_Functions_Group1 + * @{ + */ + +HAL_StatusTypeDef HAL_PCD_Init(PCD_HandleTypeDef *hpcd); +HAL_StatusTypeDef HAL_PCD_DeInit (PCD_HandleTypeDef *hpcd); +void HAL_PCD_MspInit(PCD_HandleTypeDef *hpcd); +void HAL_PCD_MspDeInit(PCD_HandleTypeDef *hpcd); + +/** + * @} + */ + +/* I/O operation functions *****************************************************/ +/* Non-Blocking mode: Interrupt */ +/** @addtogroup PCD_Exported_Functions_Group2 + * @{ + */ + +HAL_StatusTypeDef HAL_PCD_Start(PCD_HandleTypeDef *hpcd); +HAL_StatusTypeDef HAL_PCD_Stop(PCD_HandleTypeDef *hpcd); +void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd); + +void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum); +void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum); +void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd); +void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd); +void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd); +void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd); +void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd); +void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum); +void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum); +void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd); +void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd); + +/** + * @} + */ + +/* Peripheral Control functions ************************************************/ +/** @addtogroup PCD_Exported_Functions_Group3 + * @{ + */ +HAL_StatusTypeDef HAL_PCD_DevConnect(PCD_HandleTypeDef *hpcd); +HAL_StatusTypeDef HAL_PCD_DevDisconnect(PCD_HandleTypeDef *hpcd); +HAL_StatusTypeDef HAL_PCD_SetAddress(PCD_HandleTypeDef *hpcd, uint8_t address); +HAL_StatusTypeDef HAL_PCD_EP_Open(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint16_t ep_mps, uint8_t ep_type); +HAL_StatusTypeDef HAL_PCD_EP_Close(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); +HAL_StatusTypeDef HAL_PCD_EP_Receive(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len); +HAL_StatusTypeDef HAL_PCD_EP_Transmit(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len); +uint16_t HAL_PCD_EP_GetRxCount(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); +HAL_StatusTypeDef HAL_PCD_EP_SetStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); +HAL_StatusTypeDef HAL_PCD_EP_ClrStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); +HAL_StatusTypeDef HAL_PCD_EP_Flush(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); +HAL_StatusTypeDef HAL_PCD_ActivateRemoteWakeup(PCD_HandleTypeDef *hpcd); +HAL_StatusTypeDef HAL_PCD_DeActivateRemoteWakeup(PCD_HandleTypeDef *hpcd); +/** + * @} + */ + + +/* Peripheral State functions **************************************************/ +/** @addtogroup PCD_Exported_Functions_Group4 + * @{ + */ +PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd); +void HAL_PCDEx_SetConnectionState(PCD_HandleTypeDef *hpcd, uint8_t state); +/** + * @} + */ + + +/** + * @} + */ + + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + + +#endif /* __STM32L1xx_HAL_PCD_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_pcd_ex.h b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_pcd_ex.h new file mode 100755 index 0000000..5d435a7 --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_pcd_ex.h @@ -0,0 +1,97 @@ +/** + ****************************************************************************** + * @file stm32l1xx_hal_pcd_ex.h + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief Header file of PCD HAL module. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L1xx_HAL_PCD_EX_H +#define __STM32L1xx_HAL_PCD_EX_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_hal_def.h" + +/** @addtogroup STM32L1xx_HAL_Driver + * @{ + */ + +/** @addtogroup PCDEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/* Exported macros -----------------------------------------------------------*/ +/* Internal macros -----------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup PCDEx_Exported_Functions + * @{ + */ + +/** @addtogroup PCDEx_Exported_Functions_Group2 + * @{ + */ + +HAL_StatusTypeDef HAL_PCDEx_PMAConfig(PCD_HandleTypeDef *hpcd, + uint16_t ep_addr, + uint16_t ep_kind, + uint32_t pmaadress); +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + + +#endif /* __STM32L1xx_HAL_PCD_EX_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_pwr.h b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_pwr.h new file mode 100755 index 0000000..318cfd7 --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_pwr.h @@ -0,0 +1,504 @@ +/** + ****************************************************************************** + * @file stm32l1xx_hal_pwr.h + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief Header file of PWR HAL module. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L1xx_HAL_PWR_H +#define __STM32L1xx_HAL_PWR_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_hal_def.h" + +/** @addtogroup STM32L1xx_HAL_Driver + * @{ + */ + +/** @addtogroup PWR + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup PWR_Exported_Types PWR Exported Types + * @{ + */ + +/** + * @brief PWR PVD configuration structure definition + */ +typedef struct +{ + uint32_t PVDLevel; /*!< PVDLevel: Specifies the PVD detection level. + This parameter can be a value of @ref PWR_PVD_detection_level */ + + uint32_t Mode; /*!< Mode: Specifies the operating mode for the selected pins. + This parameter can be a value of @ref PWR_PVD_Mode */ +}PWR_PVDTypeDef; + +/** + * @} + */ + +/* Internal constants --------------------------------------------------------*/ + +/** @addtogroup PWR_Private_Constants + * @{ + */ +#define PWR_EXTI_LINE_PVD ((uint32_t)0x00010000) /*!< External interrupt line 16 Connected to the PVD EXTI Line */ + +/** + * @} + */ + + + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup PWR_Exported_Constants PWR Exported Constants + * @{ + */ + +/** @defgroup PWR_register_alias_address PWR Register alias address + * @{ + */ +/* ------------- PWR registers bit address in the alias region ---------------*/ +#define PWR_OFFSET (PWR_BASE - PERIPH_BASE) +#define PWR_CR_OFFSET 0x00 +#define PWR_CSR_OFFSET 0x04 +#define PWR_CR_OFFSET_BB (PWR_OFFSET + PWR_CR_OFFSET) +#define PWR_CSR_OFFSET_BB (PWR_OFFSET + PWR_CSR_OFFSET) +/** + * @} + */ + +/** @defgroup PWR_CR_register_alias PWR CR Register alias address + * @{ + */ +/* --- CR Register ---*/ +/* Alias word address of LPSDSR bit */ +#define LPSDSR_BIT_NUMBER POSITION_VAL(PWR_CR_LPSDSR) +#define CR_LPSDSR_BB ((uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32) + (LPSDSR_BIT_NUMBER * 4))) + +/* Alias word address of DBP bit */ +#define DBP_BIT_NUMBER POSITION_VAL(PWR_CR_DBP) +#define CR_DBP_BB ((uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32) + (DBP_BIT_NUMBER * 4))) + +/* Alias word address of LPRUN bit */ +#define LPRUN_BIT_NUMBER POSITION_VAL(PWR_CR_LPRUN) +#define CR_LPRUN_BB ((uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32) + (LPRUN_BIT_NUMBER * 4))) + +/* Alias word address of PVDE bit */ +#define PVDE_BIT_NUMBER POSITION_VAL(PWR_CR_PVDE) +#define CR_PVDE_BB ((uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32) + (PVDE_BIT_NUMBER * 4))) + +/* Alias word address of FWU bit */ +#define FWU_BIT_NUMBER POSITION_VAL(PWR_CR_FWU) +#define CR_FWU_BB ((uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32) + (FWU_BIT_NUMBER * 4))) + +/* Alias word address of ULP bit */ +#define ULP_BIT_NUMBER POSITION_VAL(PWR_CR_ULP) +#define CR_ULP_BB ((uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32) + (ULP_BIT_NUMBER * 4))) +/** + * @} + */ + +/** @defgroup PWR_CSR_register_alias PWR CSR Register alias address + * @{ + */ + +/* --- CSR Register ---*/ +/* Alias word address of EWUP1, EWUP2 and EWUP3 bits */ +#define CSR_EWUP_BB(VAL) ((uint32_t)(PERIPH_BB_BASE + (PWR_CSR_OFFSET_BB * 32) + (POSITION_VAL(VAL) * 4))) +/** + * @} + */ + +/** @defgroup PWR_PVD_detection_level PWR PVD detection level + * @{ + */ +#define PWR_PVDLEVEL_0 PWR_CR_PLS_LEV0 +#define PWR_PVDLEVEL_1 PWR_CR_PLS_LEV1 +#define PWR_PVDLEVEL_2 PWR_CR_PLS_LEV2 +#define PWR_PVDLEVEL_3 PWR_CR_PLS_LEV3 +#define PWR_PVDLEVEL_4 PWR_CR_PLS_LEV4 +#define PWR_PVDLEVEL_5 PWR_CR_PLS_LEV5 +#define PWR_PVDLEVEL_6 PWR_CR_PLS_LEV6 +#define PWR_PVDLEVEL_7 PWR_CR_PLS_LEV7 /* External input analog voltage + (Compare internally to VREFINT) */ + +/** + * @} + */ + +/** @defgroup PWR_PVD_Mode PWR PVD Mode + * @{ + */ +#define PWR_PVD_MODE_NORMAL ((uint32_t)0x00000000) /*!< basic mode is used */ +#define PWR_PVD_MODE_IT_RISING ((uint32_t)0x00010001) /*!< External Interrupt Mode with Rising edge trigger detection */ +#define PWR_PVD_MODE_IT_FALLING ((uint32_t)0x00010002) /*!< External Interrupt Mode with Falling edge trigger detection */ +#define PWR_PVD_MODE_IT_RISING_FALLING ((uint32_t)0x00010003) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */ +#define PWR_PVD_MODE_EVENT_RISING ((uint32_t)0x00020001) /*!< Event Mode with Rising edge trigger detection */ +#define PWR_PVD_MODE_EVENT_FALLING ((uint32_t)0x00020002) /*!< Event Mode with Falling edge trigger detection */ +#define PWR_PVD_MODE_EVENT_RISING_FALLING ((uint32_t)0x00020003) /*!< Event Mode with Rising/Falling edge trigger detection */ + + /** + * @} + */ + +/** @defgroup PWR_Regulator_state_in_SLEEP_STOP_mode PWR Regulator state in SLEEP/STOP mode + * @{ + */ +#define PWR_MAINREGULATOR_ON ((uint32_t)0x00000000) +#define PWR_LOWPOWERREGULATOR_ON PWR_CR_LPSDSR + +/** + * @} + */ + +/** @defgroup PWR_SLEEP_mode_entry PWR SLEEP mode entry + * @{ + */ +#define PWR_SLEEPENTRY_WFI ((uint8_t)0x01) +#define PWR_SLEEPENTRY_WFE ((uint8_t)0x02) + +/** + * @} + */ + +/** @defgroup PWR_STOP_mode_entry PWR STOP mode entry + * @{ + */ +#define PWR_STOPENTRY_WFI ((uint8_t)0x01) +#define PWR_STOPENTRY_WFE ((uint8_t)0x02) + +/** + * @} + */ + +/** @defgroup PWR_Regulator_Voltage_Scale PWR Regulator Voltage Scale + * @{ + */ + +#define PWR_REGULATOR_VOLTAGE_SCALE1 PWR_CR_VOS_0 +#define PWR_REGULATOR_VOLTAGE_SCALE2 PWR_CR_VOS_1 +#define PWR_REGULATOR_VOLTAGE_SCALE3 PWR_CR_VOS + + +/** + * @} + */ + +/** @defgroup PWR_Flag PWR Flag + * @{ + */ +#define PWR_FLAG_WU PWR_CSR_WUF +#define PWR_FLAG_SB PWR_CSR_SBF +#define PWR_FLAG_PVDO PWR_CSR_PVDO +#define PWR_FLAG_VREFINTRDY PWR_CSR_VREFINTRDYF +#define PWR_FLAG_VOS PWR_CSR_VOSF +#define PWR_FLAG_REGLP PWR_CSR_REGLPF + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup PWR_Exported_Macros PWR Exported Macros + * @{ + */ + +/** @brief macros configure the main internal regulator output voltage. + * @param __REGULATOR__: specifies the regulator output voltage to achieve + * a tradeoff between performance and power consumption when the device does + * not operate at the maximum frequency (refer to the datasheets for more details). + * This parameter can be one of the following values: + * @arg PWR_REGULATOR_VOLTAGE_SCALE1: Regulator voltage output Scale 1 mode, + * System frequency up to 32 MHz. + * @arg PWR_REGULATOR_VOLTAGE_SCALE2: Regulator voltage output Scale 2 mode, + * System frequency up to 16 MHz. + * @arg PWR_REGULATOR_VOLTAGE_SCALE3: Regulator voltage output Scale 3 mode, + * System frequency up to 4.2 MHz + * @retval None + */ +#define __HAL_PWR_VOLTAGESCALING_CONFIG(__REGULATOR__) (MODIFY_REG(PWR->CR, PWR_CR_VOS, (__REGULATOR__))) + +/** @brief Check PWR flag is set or not. + * @param __FLAG__: specifies the flag to check. + * This parameter can be one of the following values: + * @arg PWR_FLAG_WU: Wake Up flag. This flag indicates that a wakeup event + * was received from the WKUP pin or from the RTC alarm (Alarm B), + * RTC Tamper event, RTC TimeStamp event or RTC Wakeup. + * An additional wakeup event is detected if the WKUP pin is enabled + * (by setting the EWUP bit) when the WKUP pin level is already high. + * @arg PWR_FLAG_SB: StandBy flag. This flag indicates that the system was + * resumed from StandBy mode. + * @arg PWR_FLAG_PVDO: PVD Output. This flag is valid only if PVD is enabled + * by the HAL_PWR_EnablePVD() function. The PVD is stopped by Standby mode + * For this reason, this bit is equal to 0 after Standby or reset + * until the PVDE bit is set. + * @arg PWR_FLAG_VREFINTRDY: Internal voltage reference (VREFINT) ready flag. + * This bit indicates the state of the internal voltage reference, VREFINT. + * @arg PWR_FLAG_VOS: Voltage Scaling select flag. A delay is required for + * the internal regulator to be ready after the voltage range is changed. + * The VOSF bit indicates that the regulator has reached the voltage level + * defined with bits VOS of PWR_CR register. + * @arg PWR_FLAG_REGLP: Regulator LP flag. When the MCU exits from Low power run + * mode, this bit stays at 1 until the regulator is ready in main mode. + * A polling on this bit is recommended to wait for the regulator main mode. + * This bit is reset by hardware when the regulator is ready. + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_PWR_GET_FLAG(__FLAG__) ((PWR->CSR & (__FLAG__)) == (__FLAG__)) + +/** @brief Clear the PWR's pending flags. + * @param __FLAG__: specifies the flag to clear. + * This parameter can be one of the following values: + * @arg PWR_FLAG_WU: Wake Up flag + * @arg PWR_FLAG_SB: StandBy flag + */ +#define __HAL_PWR_CLEAR_FLAG(__FLAG__) SET_BIT(PWR->CR, ((__FLAG__) << 2)) + +/** + * @brief Enable interrupt on PVD Exti Line 16. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_ENABLE_IT() SET_BIT(EXTI->IMR, PWR_EXTI_LINE_PVD) + +/** + * @brief Disable interrupt on PVD Exti Line 16. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_DISABLE_IT() CLEAR_BIT(EXTI->IMR, PWR_EXTI_LINE_PVD) + +/** + * @brief Enable event on PVD Exti Line 16. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_ENABLE_EVENT() SET_BIT(EXTI->EMR, PWR_EXTI_LINE_PVD) + +/** + * @brief Disable event on PVD Exti Line 16. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_DISABLE_EVENT() CLEAR_BIT(EXTI->EMR, PWR_EXTI_LINE_PVD) + + +/** + * @brief PVD EXTI line configuration: set falling edge trigger. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR, PWR_EXTI_LINE_PVD) + + +/** + * @brief Disable the PVD Extended Interrupt Falling Trigger. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR, PWR_EXTI_LINE_PVD) + + +/** + * @brief PVD EXTI line configuration: set rising edge trigger. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR, PWR_EXTI_LINE_PVD) + +/** + * @brief Disable the PVD Extended Interrupt Rising Trigger. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR, PWR_EXTI_LINE_PVD) + +/** + * @brief PVD EXTI line configuration: set rising & falling edge trigger. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_FALLING_EDGE() \ + do { \ + __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE(); \ + __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE(); \ + } while(0) + +/** + * @brief Disable the PVD Extended Interrupt Rising & Falling Trigger. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_FALLING_EDGE() \ + do { \ + __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE(); \ + __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE(); \ + } while(0) + + + +/** + * @brief Check whether the specified PVD EXTI interrupt flag is set or not. + * @retval EXTI PVD Line Status. + */ +#define __HAL_PWR_PVD_EXTI_GET_FLAG() (EXTI->PR & (PWR_EXTI_LINE_PVD)) + +/** + * @brief Clear the PVD EXTI flag. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_CLEAR_FLAG() (EXTI->PR = (PWR_EXTI_LINE_PVD)) + +/** + * @brief Generate a Software interrupt on selected EXTI line. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_GENERATE_SWIT() SET_BIT(EXTI->SWIER, PWR_EXTI_LINE_PVD) + +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/** @defgroup PWR_Private_Macros PWR Private Macros + * @{ + */ + +#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLEVEL_0) || ((LEVEL) == PWR_PVDLEVEL_1)|| \ + ((LEVEL) == PWR_PVDLEVEL_2) || ((LEVEL) == PWR_PVDLEVEL_3)|| \ + ((LEVEL) == PWR_PVDLEVEL_4) || ((LEVEL) == PWR_PVDLEVEL_5)|| \ + ((LEVEL) == PWR_PVDLEVEL_6) || ((LEVEL) == PWR_PVDLEVEL_7)) + + +#define IS_PWR_PVD_MODE(MODE) (((MODE) == PWR_PVD_MODE_IT_RISING)|| ((MODE) == PWR_PVD_MODE_IT_FALLING) || \ + ((MODE) == PWR_PVD_MODE_IT_RISING_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING) || \ + ((MODE) == PWR_PVD_MODE_EVENT_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING_FALLING) || \ + ((MODE) == PWR_PVD_MODE_NORMAL)) + +#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_ON) || \ + ((REGULATOR) == PWR_LOWPOWERREGULATOR_ON)) + + +#define IS_PWR_SLEEP_ENTRY(ENTRY) (((ENTRY) == PWR_SLEEPENTRY_WFI) || ((ENTRY) == PWR_SLEEPENTRY_WFE)) + +#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPENTRY_WFI) || ((ENTRY) == PWR_STOPENTRY_WFE) ) + +#define IS_PWR_VOLTAGE_SCALING_RANGE(RANGE) (((RANGE) == PWR_REGULATOR_VOLTAGE_SCALE1) || \ + ((RANGE) == PWR_REGULATOR_VOLTAGE_SCALE2) || \ + ((RANGE) == PWR_REGULATOR_VOLTAGE_SCALE3)) + + +/** + * @} + */ + + + +/* Include PWR HAL Extension module */ +#include "stm32l1xx_hal_pwr_ex.h" + +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup PWR_Exported_Functions PWR Exported Functions + * @{ + */ + +/** @addtogroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ + +/* Initialization and de-initialization functions *******************************/ +void HAL_PWR_DeInit(void); +void HAL_PWR_EnableBkUpAccess(void); +void HAL_PWR_DisableBkUpAccess(void); + +/** + * @} + */ + +/** @addtogroup PWR_Exported_Functions_Group2 Peripheral Control functions + * @{ + */ + +/* Peripheral Control functions ************************************************/ +void HAL_PWR_ConfigPVD(PWR_PVDTypeDef *sConfigPVD); +void HAL_PWR_EnablePVD(void); +void HAL_PWR_DisablePVD(void); + +/* WakeUp pins configuration functions ****************************************/ +void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinx); +void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx); + +/* Low Power modes configuration functions ************************************/ +void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry); +void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry); +void HAL_PWR_EnterSTANDBYMode(void); + +void HAL_PWR_EnableSleepOnExit(void); +void HAL_PWR_DisableSleepOnExit(void); +void HAL_PWR_EnableSEVOnPend(void); +void HAL_PWR_DisableSEVOnPend(void); + + + +void HAL_PWR_PVD_IRQHandler(void); +void HAL_PWR_PVDCallback(void); +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + + +#endif /* __STM32L1xx_HAL_PWR_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_pwr_ex.h b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_pwr_ex.h new file mode 100755 index 0000000..fd34763 --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_pwr_ex.h @@ -0,0 +1,136 @@ +/** + ****************************************************************************** + * @file stm32l1xx_hal_pwr_ex.h + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief Header file of PWR HAL Extension module. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L1xx_HAL_PWR_EX_H +#define __STM32L1xx_HAL_PWR_EX_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_hal_def.h" + +/** @addtogroup STM32L1xx_HAL_Driver + * @{ + */ + +/** @addtogroup PWREx + * @{ + */ + + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup PWREx_Exported_Constants PWREx Exported Constants + * @{ + */ + + +/** @defgroup PWREx_WakeUp_Pins PWREx Wakeup Pins + * @{ + */ + +#if defined (STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined (STM32L151xE) || defined (STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) || defined (STM32L151xB) || defined (STM32L151xBA) || defined (STM32L151xC) || defined (STM32L152xB) || defined (STM32L152xBA) || defined (STM32L152xC) || defined (STM32L162xC) + +#define PWR_WAKEUP_PIN1 PWR_CSR_EWUP1 +#define PWR_WAKEUP_PIN2 PWR_CSR_EWUP2 +#define PWR_WAKEUP_PIN3 PWR_CSR_EWUP3 +#define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1) || \ + ((PIN) == PWR_WAKEUP_PIN2) || \ + ((PIN) == PWR_WAKEUP_PIN3)) +#else +#define PWR_WAKEUP_PIN1 PWR_CSR_EWUP1 +#define PWR_WAKEUP_PIN2 PWR_CSR_EWUP2 +#define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1) || \ + ((PIN) == PWR_WAKEUP_PIN2)) +#endif + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup PWREx_Exported_Functions PWREx Exported Functions + * @{ + */ + +/** @addtogroup PWREx_Exported_Functions_Group1 + * @{ + */ + +/* Peripheral Control methods ************************************************/ +uint32_t HAL_PWREx_GetVoltageRange(void); +void HAL_PWREx_EnableFastWakeUp(void); +void HAL_PWREx_DisableFastWakeUp(void); +void HAL_PWREx_EnableUltraLowPower(void); +void HAL_PWREx_DisableUltraLowPower(void); +void HAL_PWREx_EnableLowPowerRunMode(void); +HAL_StatusTypeDef HAL_PWREx_DisableLowPowerRunMode(void); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + + +#endif /* __STM32L1xx_HAL_PWR_EX_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_rcc.h b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_rcc.h new file mode 100755 index 0000000..03baac3 --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_rcc.h @@ -0,0 +1,1918 @@ +/** + ****************************************************************************** + * @file stm32l1xx_hal_rcc.h + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief Header file of RCC HAL module. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L1xx_HAL_RCC_H +#define __STM32L1xx_HAL_RCC_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_hal_def.h" + +/** @addtogroup STM32L1xx_HAL_Driver + * @{ + */ + +/** @addtogroup RCC + * @{ + */ + +/** @addtogroup RCC_Private_Constants + * @{ + */ + +/** @defgroup RCC_Timeout RCC Timeout + * @{ + */ + +/* Disable Backup domain write protection state change timeout */ +#define RCC_DBP_TIMEOUT_VALUE (100U) /* 100 ms */ +/* LSE state change timeout */ +#define RCC_LSE_TIMEOUT_VALUE LSE_STARTUP_TIMEOUT +#define CLOCKSWITCH_TIMEOUT_VALUE (5000U) /* 5 s */ +#define HSE_TIMEOUT_VALUE HSE_STARTUP_TIMEOUT +#define MSI_TIMEOUT_VALUE (2U) /* 2 ms (minimum Tick + 1) */ +#define HSI_TIMEOUT_VALUE (2U) /* 2 ms (minimum Tick + 1) */ +#define LSI_TIMEOUT_VALUE (2U) /* 2 ms (minimum Tick + 1) */ +#define PLL_TIMEOUT_VALUE (2U) /* 2 ms (minimum Tick + 1) */ +/** + * @} + */ + +/** @defgroup RCC_Register_Offset Register offsets + * @{ + */ +#define RCC_OFFSET (RCC_BASE - PERIPH_BASE) +#define RCC_CR_OFFSET 0x00 +#define RCC_CFGR_OFFSET 0x08 +#define RCC_CIR_OFFSET 0x0C +#define RCC_CSR_OFFSET 0x34 +/** + * @} + */ + +/** @defgroup RCC_BitAddress_AliasRegion BitAddress AliasRegion + * @brief RCC registers bit address in the alias region + * @{ + */ +#define RCC_CR_OFFSET_BB (RCC_OFFSET + RCC_CR_OFFSET) +#define RCC_CFGR_OFFSET_BB (RCC_OFFSET + RCC_CFGR_OFFSET) +#define RCC_CIR_OFFSET_BB (RCC_OFFSET + RCC_CIR_OFFSET) +#define RCC_CSR_OFFSET_BB (RCC_OFFSET + RCC_CSR_OFFSET) + +/* --- CR Register ---*/ +/* Alias word address of HSION bit */ +#define RCC_HSION_BIT_NUMBER POSITION_VAL(RCC_CR_HSION) +#define RCC_CR_HSION_BB ((uint32_t)(PERIPH_BB_BASE + (RCC_CR_OFFSET_BB * 32) + (RCC_HSION_BIT_NUMBER * 4))) +/* Alias word address of MSION bit */ +#define RCC_MSION_BIT_NUMBER POSITION_VAL(RCC_CR_MSION) +#define RCC_CR_MSION_BB ((uint32_t)(PERIPH_BB_BASE + (RCC_CR_OFFSET_BB * 32) + (RCC_MSION_BIT_NUMBER * 4))) +/* Alias word address of HSEON bit */ +#define RCC_HSEON_BIT_NUMBER POSITION_VAL(RCC_CR_HSEON) +#define RCC_CR_HSEON_BB ((uint32_t)(PERIPH_BB_BASE + (RCC_CR_OFFSET_BB * 32) + (RCC_HSEON_BIT_NUMBER * 4))) +/* Alias word address of CSSON bit */ +#define RCC_CSSON_BIT_NUMBER POSITION_VAL(RCC_CR_CSSON) +#define RCC_CR_CSSON_BB ((uint32_t)(PERIPH_BB_BASE + (RCC_CR_OFFSET_BB * 32) + (RCC_CSSON_BIT_NUMBER * 4))) +/* Alias word address of PLLON bit */ +#define RCC_PLLON_BIT_NUMBER POSITION_VAL(RCC_CR_PLLON) +#define RCC_CR_PLLON_BB ((uint32_t)(PERIPH_BB_BASE + (RCC_CR_OFFSET_BB * 32) + (RCC_PLLON_BIT_NUMBER * 4))) + +/* --- CSR Register ---*/ +/* Alias word address of LSION bit */ +#define RCC_LSION_BIT_NUMBER POSITION_VAL(RCC_CSR_LSION) +#define RCC_CSR_LSION_BB ((uint32_t)(PERIPH_BB_BASE + (RCC_CSR_OFFSET_BB * 32) + (RCC_LSION_BIT_NUMBER * 4))) + +/* Alias word address of RMVF bit */ +#define RCC_RMVF_BIT_NUMBER POSITION_VAL(RCC_CSR_RMVF) +#define RCC_CSR_RMVF_BB ((uint32_t)(PERIPH_BB_BASE + (RCC_CSR_OFFSET_BB * 32) + (RCC_RMVF_BIT_NUMBER * 4))) + +/* Alias word address of LSEON bit */ +#define RCC_LSEON_BIT_NUMBER POSITION_VAL(RCC_CSR_LSEON) +#define RCC_CSR_LSEON_BB ((uint32_t)(PERIPH_BB_BASE + (RCC_CSR_OFFSET_BB * 32) + (RCC_LSEON_BIT_NUMBER * 4))) + +/* Alias word address of LSEON bit */ +#define RCC_LSEBYP_BIT_NUMBER POSITION_VAL(RCC_CSR_LSEBYP) +#define RCC_CSR_LSEBYP_BB ((uint32_t)(PERIPH_BB_BASE + (RCC_CSR_OFFSET_BB * 32) + (RCC_LSEBYP_BIT_NUMBER * 4))) + +/* Alias word address of RTCEN bit */ +#define RCC_RTCEN_BIT_NUMBER POSITION_VAL(RCC_CSR_RTCEN) +#define RCC_CSR_RTCEN_BB ((uint32_t)(PERIPH_BB_BASE + (RCC_CSR_OFFSET_BB * 32) + (RCC_RTCEN_BIT_NUMBER * 4))) + +/* Alias word address of RTCRST bit */ +#define RCC_RTCRST_BIT_NUMBER POSITION_VAL(RCC_CSR_RTCRST) +#define RCC_CSR_RTCRST_BB ((uint32_t)(PERIPH_BB_BASE + (RCC_CSR_OFFSET_BB * 32) + (RCC_RTCRST_BIT_NUMBER * 4))) + +/** + * @} + */ + +/* CR register byte 2 (Bits[23:16]) base address */ +#define RCC_CR_BYTE2_ADDRESS ((uint32_t)(RCC_BASE + RCC_CR_OFFSET + 0x02)) + +/* CIR register byte 1 (Bits[15:8]) base address */ +#define RCC_CIR_BYTE1_ADDRESS ((uint32_t)(RCC_BASE + RCC_CIR_OFFSET + 0x01)) + +/* CIR register byte 2 (Bits[23:16]) base address */ +#define RCC_CIR_BYTE2_ADDRESS ((uint32_t)(RCC_BASE + RCC_CIR_OFFSET + 0x02)) + +/* Defines used for Flags */ +#define CR_REG_INDEX ((uint8_t)1) +#define CSR_REG_INDEX ((uint8_t)2) + +#define RCC_FLAG_MASK ((uint8_t)0x1F) + +/** + * @} + */ + +/** @addtogroup RCC_Private_Macros + * @{ + */ +#define IS_RCC_PLLSOURCE(__SOURCE__) (((__SOURCE__) == RCC_PLLSOURCE_HSI) || \ + ((__SOURCE__) == RCC_PLLSOURCE_HSE)) +#define IS_RCC_OSCILLATORTYPE(__OSCILLATOR__) (((__OSCILLATOR__) == RCC_OSCILLATORTYPE_NONE) || \ + (((__OSCILLATOR__) & RCC_OSCILLATORTYPE_HSE) == RCC_OSCILLATORTYPE_HSE) || \ + (((__OSCILLATOR__) & RCC_OSCILLATORTYPE_HSI) == RCC_OSCILLATORTYPE_HSI) || \ + (((__OSCILLATOR__) & RCC_OSCILLATORTYPE_LSI) == RCC_OSCILLATORTYPE_LSI) || \ + (((__OSCILLATOR__) & RCC_OSCILLATORTYPE_LSE) == RCC_OSCILLATORTYPE_LSE) || \ + (((__OSCILLATOR__) & RCC_OSCILLATORTYPE_MSI) == RCC_OSCILLATORTYPE_MSI)) +#define IS_RCC_HSE(__HSE__) (((__HSE__) == RCC_HSE_OFF) || ((__HSE__) == RCC_HSE_ON) || \ + ((__HSE__) == RCC_HSE_BYPASS)) +#define IS_RCC_LSE(__LSE__) (((__LSE__) == RCC_LSE_OFF) || ((__LSE__) == RCC_LSE_ON) || \ + ((__LSE__) == RCC_LSE_BYPASS)) +#define IS_RCC_HSI(__HSI__) (((__HSI__) == RCC_HSI_OFF) || ((__HSI__) == RCC_HSI_ON)) +#define IS_RCC_CALIBRATION_VALUE(__VALUE__) ((__VALUE__) <= 0x1F) +#define IS_RCC_MSICALIBRATION_VALUE(__VALUE__) ((__VALUE__) <= 0xFF) +#define IS_RCC_MSI_CLOCK_RANGE(__RANGE__) (((__RANGE__) == RCC_MSIRANGE_0) || \ + ((__RANGE__) == RCC_MSIRANGE_1) || \ + ((__RANGE__) == RCC_MSIRANGE_2) || \ + ((__RANGE__) == RCC_MSIRANGE_3) || \ + ((__RANGE__) == RCC_MSIRANGE_4) || \ + ((__RANGE__) == RCC_MSIRANGE_5) || \ + ((__RANGE__) == RCC_MSIRANGE_6)) +#define IS_RCC_LSI(__LSI__) (((__LSI__) == RCC_LSI_OFF) || ((__LSI__) == RCC_LSI_ON)) +#define IS_RCC_MSI(__MSI__) (((__MSI__) == RCC_MSI_OFF) || ((__MSI__) == RCC_MSI_ON)) + +#define IS_RCC_PLL(__PLL__) (((__PLL__) == RCC_PLL_NONE) || ((__PLL__) == RCC_PLL_OFF) || \ + ((__PLL__) == RCC_PLL_ON)) +#define IS_RCC_PLL_DIV(__DIV__) (((__DIV__) == RCC_PLL_DIV2) || \ + ((__DIV__) == RCC_PLL_DIV3) || ((__DIV__) == RCC_PLL_DIV4)) + +#define IS_RCC_PLL_MUL(__MUL__) (((__MUL__) == RCC_PLL_MUL3) || ((__MUL__) == RCC_PLL_MUL4) || \ + ((__MUL__) == RCC_PLL_MUL6) || ((__MUL__) == RCC_PLL_MUL8) || \ + ((__MUL__) == RCC_PLL_MUL12) || ((__MUL__) == RCC_PLL_MUL16) || \ + ((__MUL__) == RCC_PLL_MUL24) || ((__MUL__) == RCC_PLL_MUL32) || \ + ((__MUL__) == RCC_PLL_MUL48)) +#define IS_RCC_CLOCKTYPE(CLK) ((((CLK) & RCC_CLOCKTYPE_SYSCLK) == RCC_CLOCKTYPE_SYSCLK) || \ + (((CLK) & RCC_CLOCKTYPE_HCLK) == RCC_CLOCKTYPE_HCLK) || \ + (((CLK) & RCC_CLOCKTYPE_PCLK1) == RCC_CLOCKTYPE_PCLK1) || \ + (((CLK) & RCC_CLOCKTYPE_PCLK2) == RCC_CLOCKTYPE_PCLK2)) +#define IS_RCC_SYSCLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_SYSCLKSOURCE_MSI) || \ + ((__SOURCE__) == RCC_SYSCLKSOURCE_HSI) || \ + ((__SOURCE__) == RCC_SYSCLKSOURCE_HSE) || \ + ((__SOURCE__) == RCC_SYSCLKSOURCE_PLLCLK)) +#define IS_RCC_SYSCLKSOURCE_STATUS(__SOURCE__) (((__SOURCE__) == RCC_SYSCLKSOURCE_STATUS_MSI) || \ + ((__SOURCE__) == RCC_SYSCLKSOURCE_STATUS_HSI) || \ + ((__SOURCE__) == RCC_SYSCLKSOURCE_STATUS_HSE) || \ + ((__SOURCE__) == RCC_SYSCLKSOURCE_STATUS_PLLCLK)) +#define IS_RCC_HCLK(__HCLK__) (((__HCLK__) == RCC_SYSCLK_DIV1) || ((__HCLK__) == RCC_SYSCLK_DIV2) || \ + ((__HCLK__) == RCC_SYSCLK_DIV4) || ((__HCLK__) == RCC_SYSCLK_DIV8) || \ + ((__HCLK__) == RCC_SYSCLK_DIV16) || ((__HCLK__) == RCC_SYSCLK_DIV64) || \ + ((__HCLK__) == RCC_SYSCLK_DIV128) || ((__HCLK__) == RCC_SYSCLK_DIV256) || \ + ((__HCLK__) == RCC_SYSCLK_DIV512)) +#define IS_RCC_PCLK(__PCLK__) (((__PCLK__) == RCC_HCLK_DIV1) || ((__PCLK__) == RCC_HCLK_DIV2) || \ + ((__PCLK__) == RCC_HCLK_DIV4) || ((__PCLK__) == RCC_HCLK_DIV8) || \ + ((__PCLK__) == RCC_HCLK_DIV16)) +#define IS_RCC_MCO(__MCO__) ((__MCO__) == RCC_MCO) +#define IS_RCC_MCODIV(__DIV__) (((__DIV__) == RCC_MCODIV_1) || ((__DIV__) == RCC_MCODIV_2) || \ + ((__DIV__) == RCC_MCODIV_4) || ((__DIV__) == RCC_MCODIV_8) || \ + ((__DIV__) == RCC_MCODIV_16)) +#define IS_RCC_MCO1SOURCE(__SOURCE__) (((__SOURCE__) == RCC_MCO1SOURCE_SYSCLK) || ((__SOURCE__) == RCC_MCO1SOURCE_MSI) \ + || ((__SOURCE__) == RCC_MCO1SOURCE_HSI) || ((__SOURCE__) == RCC_MCO1SOURCE_LSE) \ + || ((__SOURCE__) == RCC_MCO1SOURCE_LSI) || ((__SOURCE__) == RCC_MCO1SOURCE_HSE) \ + || ((__SOURCE__) == RCC_MCO1SOURCE_PLLCLK) || ((__SOURCE__) == RCC_MCO1SOURCE_NOCLOCK)) +#define IS_RCC_RTCCLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_RTCCLKSOURCE_NO_CLK) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_LSE) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_LSI) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV2) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV4) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV8) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV16)) + +/** + * @} + */ + +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup RCC_Exported_Types RCC Exported Types + * @{ + */ + +/** + * @brief RCC PLL configuration structure definition + */ +typedef struct +{ + uint32_t PLLState; /*!< PLLState: The new state of the PLL. + This parameter can be a value of @ref RCC_PLL_Config */ + + uint32_t PLLSource; /*!< PLLSource: PLL entry clock source. + This parameter must be a value of @ref RCC_PLL_Clock_Source */ + + uint32_t PLLMUL; /*!< PLLMUL: Multiplication factor for PLL VCO input clock + This parameter must be a value of @ref RCC_PLL_Multiplication_Factor*/ + + uint32_t PLLDIV; /*!< PLLDIV: Division factor for PLL VCO input clock + This parameter must be a value of @ref RCC_PLL_Division_Factor*/ +} RCC_PLLInitTypeDef; + +/** + * @brief RCC Internal/External Oscillator (HSE, HSI, LSE and LSI) configuration structure definition + */ +typedef struct +{ + uint32_t OscillatorType; /*!< The oscillators to be configured. + This parameter can be a value of @ref RCC_Oscillator_Type */ + + uint32_t HSEState; /*!< The new state of the HSE. + This parameter can be a value of @ref RCC_HSE_Config */ + + uint32_t LSEState; /*!< The new state of the LSE. + This parameter can be a value of @ref RCC_LSE_Config */ + + uint32_t HSIState; /*!< The new state of the HSI. + This parameter can be a value of @ref RCC_HSI_Config */ + + uint32_t HSICalibrationValue; /*!< The HSI calibration trimming value (default is RCC_HSICALIBRATION_DEFAULT). + This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1F */ + + uint32_t LSIState; /*!< The new state of the LSI. + This parameter can be a value of @ref RCC_LSI_Config */ + + uint32_t MSIState; /*!< The new state of the MSI. + This parameter can be a value of @ref RCC_MSI_Config */ + + uint32_t MSICalibrationValue; /*!< The MSI calibration trimming value. (default is RCC_MSICALIBRATION_DEFAULT). + This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF */ + + uint32_t MSIClockRange; /*!< The MSI frequency range. + This parameter can be a value of @ref RCC_MSI_Clock_Range */ + + RCC_PLLInitTypeDef PLL; /*!< PLL structure parameters */ + +} RCC_OscInitTypeDef; + +/** + * @brief RCC System, AHB and APB busses clock configuration structure definition + */ +typedef struct +{ + uint32_t ClockType; /*!< The clock to be configured. + This parameter can be a value of @ref RCC_System_Clock_Type */ + + uint32_t SYSCLKSource; /*!< The clock source (SYSCLKS) used as system clock. + This parameter can be a value of @ref RCC_System_Clock_Source */ + + uint32_t AHBCLKDivider; /*!< The AHB clock (HCLK) divider. This clock is derived from the system clock (SYSCLK). + This parameter can be a value of @ref RCC_AHB_Clock_Source */ + + uint32_t APB1CLKDivider; /*!< The APB1 clock (PCLK1) divider. This clock is derived from the AHB clock (HCLK). + This parameter can be a value of @ref RCC_APB1_APB2_Clock_Source */ + + uint32_t APB2CLKDivider; /*!< The APB2 clock (PCLK2) divider. This clock is derived from the AHB clock (HCLK). + This parameter can be a value of @ref RCC_APB1_APB2_Clock_Source */ +} RCC_ClkInitTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup RCC_Exported_Constants RCC Exported Constants + * @{ + */ + +/** @defgroup RCC_PLL_Clock_Source PLL Clock Source + * @{ + */ + +#define RCC_PLLSOURCE_HSI RCC_CFGR_PLLSRC_HSI /*!< HSI clock selected as PLL entry clock source */ +#define RCC_PLLSOURCE_HSE RCC_CFGR_PLLSRC_HSE /*!< HSE clock selected as PLL entry clock source */ + +/** + * @} + */ + +/** @defgroup RCC_Oscillator_Type Oscillator Type + * @{ + */ +#define RCC_OSCILLATORTYPE_NONE ((uint32_t)0x00000000) +#define RCC_OSCILLATORTYPE_HSE ((uint32_t)0x00000001) +#define RCC_OSCILLATORTYPE_HSI ((uint32_t)0x00000002) +#define RCC_OSCILLATORTYPE_LSE ((uint32_t)0x00000004) +#define RCC_OSCILLATORTYPE_LSI ((uint32_t)0x00000008) +#define RCC_OSCILLATORTYPE_MSI ((uint32_t)0x00000010) +/** + * @} + */ + +/** @defgroup RCC_HSE_Config HSE Config + * @{ + */ +#define RCC_HSE_OFF ((uint32_t)0x00000000) /*!< HSE clock deactivation */ +#define RCC_HSE_ON ((uint32_t)0x00000001) /*!< HSE clock activation */ +#define RCC_HSE_BYPASS ((uint32_t)0x00000005) /*!< External clock source for HSE clock */ +/** + * @} + */ + +/** @defgroup RCC_LSE_Config LSE Config + * @{ + */ +#define RCC_LSE_OFF ((uint32_t)0x00000000) /*!< LSE clock deactivation */ +#define RCC_LSE_ON ((uint32_t)0x00000001) /*!< LSE clock activation */ +#define RCC_LSE_BYPASS ((uint32_t)0x00000005) /*!< External clock source for LSE clock */ + +/** + * @} + */ + +/** @defgroup RCC_HSI_Config HSI Config + * @{ + */ +#define RCC_HSI_OFF ((uint32_t)0x00000000) /*!< HSI clock deactivation */ +#define RCC_HSI_ON RCC_CR_HSION /*!< HSI clock activation */ + +#define RCC_HSICALIBRATION_DEFAULT ((uint32_t)0x10) /* Default HSI calibration trimming value */ + +/** + * @} + */ + +/** @defgroup RCC_MSI_Clock_Range MSI Clock Range + * @{ + */ + +#define RCC_MSIRANGE_0 RCC_ICSCR_MSIRANGE_0 /*!< MSI = 65.536 KHz */ +#define RCC_MSIRANGE_1 RCC_ICSCR_MSIRANGE_1 /*!< MSI = 131.072 KHz */ +#define RCC_MSIRANGE_2 RCC_ICSCR_MSIRANGE_2 /*!< MSI = 262.144 KHz */ +#define RCC_MSIRANGE_3 RCC_ICSCR_MSIRANGE_3 /*!< MSI = 524.288 KHz */ +#define RCC_MSIRANGE_4 RCC_ICSCR_MSIRANGE_4 /*!< MSI = 1.048 MHz */ +#define RCC_MSIRANGE_5 RCC_ICSCR_MSIRANGE_5 /*!< MSI = 2.097 MHz */ +#define RCC_MSIRANGE_6 RCC_ICSCR_MSIRANGE_6 /*!< MSI = 4.194 MHz */ + +/** + * @} + */ + +/** @defgroup RCC_LSI_Config LSI Config + * @{ + */ +#define RCC_LSI_OFF ((uint32_t)0x00000000) /*!< LSI clock deactivation */ +#define RCC_LSI_ON RCC_CSR_LSION /*!< LSI clock activation */ + +/** + * @} + */ + +/** @defgroup RCC_MSI_Config MSI Config + * @{ + */ +#define RCC_MSI_OFF ((uint32_t)0x00000000) +#define RCC_MSI_ON ((uint32_t)0x00000001) + +#define RCC_MSICALIBRATION_DEFAULT ((uint32_t)0x00000000U) /* Default MSI calibration trimming value */ + +/** + * @} + */ + +/** @defgroup RCC_PLL_Config PLL Config + * @{ + */ +#define RCC_PLL_NONE ((uint32_t)0x00000000) /*!< PLL is not configured */ +#define RCC_PLL_OFF ((uint32_t)0x00000001) /*!< PLL deactivation */ +#define RCC_PLL_ON ((uint32_t)0x00000002) /*!< PLL activation */ + +/** + * @} + */ + +/** @defgroup RCC_System_Clock_Type System Clock Type + * @{ + */ +#define RCC_CLOCKTYPE_SYSCLK ((uint32_t)0x00000001) /*!< SYSCLK to configure */ +#define RCC_CLOCKTYPE_HCLK ((uint32_t)0x00000002) /*!< HCLK to configure */ +#define RCC_CLOCKTYPE_PCLK1 ((uint32_t)0x00000004) /*!< PCLK1 to configure */ +#define RCC_CLOCKTYPE_PCLK2 ((uint32_t)0x00000008) /*!< PCLK2 to configure */ + +/** + * @} + */ + +/** @defgroup RCC_System_Clock_Source System Clock Source + * @{ + */ +#define RCC_SYSCLKSOURCE_MSI RCC_CFGR_SW_MSI /*!< MSI selected as system clock */ +#define RCC_SYSCLKSOURCE_HSI RCC_CFGR_SW_HSI /*!< HSI selected as system clock */ +#define RCC_SYSCLKSOURCE_HSE RCC_CFGR_SW_HSE /*!< HSE selected as system clock */ +#define RCC_SYSCLKSOURCE_PLLCLK RCC_CFGR_SW_PLL /*!< PLL selected as system clock */ + +/** + * @} + */ + +/** @defgroup RCC_System_Clock_Source_Status System Clock Source Status + * @{ + */ +#define RCC_SYSCLKSOURCE_STATUS_MSI RCC_CFGR_SWS_MSI /*!< MSI used as system clock */ +#define RCC_SYSCLKSOURCE_STATUS_HSI RCC_CFGR_SWS_HSI /*!< HSI used as system clock */ +#define RCC_SYSCLKSOURCE_STATUS_HSE RCC_CFGR_SWS_HSE /*!< HSE used as system clock */ +#define RCC_SYSCLKSOURCE_STATUS_PLLCLK RCC_CFGR_SWS_PLL /*!< PLL used as system clock */ + +/** + * @} + */ + +/** @defgroup RCC_AHB_Clock_Source AHB Clock Source + * @{ + */ +#define RCC_SYSCLK_DIV1 RCC_CFGR_HPRE_DIV1 /*!< SYSCLK not divided */ +#define RCC_SYSCLK_DIV2 RCC_CFGR_HPRE_DIV2 /*!< SYSCLK divided by 2 */ +#define RCC_SYSCLK_DIV4 RCC_CFGR_HPRE_DIV4 /*!< SYSCLK divided by 4 */ +#define RCC_SYSCLK_DIV8 RCC_CFGR_HPRE_DIV8 /*!< SYSCLK divided by 8 */ +#define RCC_SYSCLK_DIV16 RCC_CFGR_HPRE_DIV16 /*!< SYSCLK divided by 16 */ +#define RCC_SYSCLK_DIV64 RCC_CFGR_HPRE_DIV64 /*!< SYSCLK divided by 64 */ +#define RCC_SYSCLK_DIV128 RCC_CFGR_HPRE_DIV128 /*!< SYSCLK divided by 128 */ +#define RCC_SYSCLK_DIV256 RCC_CFGR_HPRE_DIV256 /*!< SYSCLK divided by 256 */ +#define RCC_SYSCLK_DIV512 RCC_CFGR_HPRE_DIV512 /*!< SYSCLK divided by 512 */ + +/** + * @} + */ + +/** @defgroup RCC_APB1_APB2_Clock_Source APB1 APB2 Clock Source + * @{ + */ +#define RCC_HCLK_DIV1 RCC_CFGR_PPRE1_DIV1 /*!< HCLK not divided */ +#define RCC_HCLK_DIV2 RCC_CFGR_PPRE1_DIV2 /*!< HCLK divided by 2 */ +#define RCC_HCLK_DIV4 RCC_CFGR_PPRE1_DIV4 /*!< HCLK divided by 4 */ +#define RCC_HCLK_DIV8 RCC_CFGR_PPRE1_DIV8 /*!< HCLK divided by 8 */ +#define RCC_HCLK_DIV16 RCC_CFGR_PPRE1_DIV16 /*!< HCLK divided by 16 */ + +/** + * @} + */ + +/** @defgroup RCC_HAL_EC_RTC_HSE_DIV RTC HSE Prescaler + * @{ + */ +#define RCC_RTC_HSE_DIV_2 (uint32_t)0x00000000U /*!< HSE is divided by 2 for RTC clock */ +#define RCC_RTC_HSE_DIV_4 RCC_CR_RTCPRE_0 /*!< HSE is divided by 4 for RTC clock */ +#define RCC_RTC_HSE_DIV_8 RCC_CR_RTCPRE_1 /*!< HSE is divided by 8 for RTC clock */ +#define RCC_RTC_HSE_DIV_16 RCC_CR_RTCPRE /*!< HSE is divided by 16 for RTC clock */ +/** + * @} + */ + +/** @defgroup RCC_RTC_LCD_Clock_Source RTC LCD Clock Source + * @{ + */ +#define RCC_RTCCLKSOURCE_NO_CLK ((uint32_t)0x00000000) /*!< No clock */ +#define RCC_RTCCLKSOURCE_LSE RCC_CSR_RTCSEL_LSE /*!< LSE oscillator clock used as RTC clock */ +#define RCC_RTCCLKSOURCE_LSI RCC_CSR_RTCSEL_LSI /*!< LSI oscillator clock used as RTC clock */ +#define RCC_RTCCLKSOURCE_HSE_DIVX RCC_CSR_RTCSEL_HSE /*!< HSE oscillator clock divided by X used as RTC clock */ +#define RCC_RTCCLKSOURCE_HSE_DIV2 (RCC_RTC_HSE_DIV_2 | RCC_CSR_RTCSEL_HSE) /*!< HSE oscillator clock divided by 2 used as RTC clock */ +#define RCC_RTCCLKSOURCE_HSE_DIV4 (RCC_RTC_HSE_DIV_4 | RCC_CSR_RTCSEL_HSE) /*!< HSE oscillator clock divided by 4 used as RTC clock */ +#define RCC_RTCCLKSOURCE_HSE_DIV8 (RCC_RTC_HSE_DIV_8 | RCC_CSR_RTCSEL_HSE) /*!< HSE oscillator clock divided by 8 used as RTC clock */ +#define RCC_RTCCLKSOURCE_HSE_DIV16 (RCC_RTC_HSE_DIV_16 | RCC_CSR_RTCSEL_HSE) /*!< HSE oscillator clock divided by 16 used as RTC clock */ +/** + * @} + */ + +/** @defgroup RCC_PLL_Division_Factor PLL Division Factor + * @{ + */ + +#define RCC_PLL_DIV2 RCC_CFGR_PLLDIV2 +#define RCC_PLL_DIV3 RCC_CFGR_PLLDIV3 +#define RCC_PLL_DIV4 RCC_CFGR_PLLDIV4 + +/** + * @} + */ + +/** @defgroup RCC_PLL_Multiplication_Factor PLL Multiplication Factor + * @{ + */ + +#define RCC_PLL_MUL3 RCC_CFGR_PLLMUL3 +#define RCC_PLL_MUL4 RCC_CFGR_PLLMUL4 +#define RCC_PLL_MUL6 RCC_CFGR_PLLMUL6 +#define RCC_PLL_MUL8 RCC_CFGR_PLLMUL8 +#define RCC_PLL_MUL12 RCC_CFGR_PLLMUL12 +#define RCC_PLL_MUL16 RCC_CFGR_PLLMUL16 +#define RCC_PLL_MUL24 RCC_CFGR_PLLMUL24 +#define RCC_PLL_MUL32 RCC_CFGR_PLLMUL32 +#define RCC_PLL_MUL48 RCC_CFGR_PLLMUL48 + +/** + * @} + */ + +/** @defgroup RCC_MCO_Index MCO Index + * @{ + */ +#define RCC_MCO1 ((uint32_t)0x00000000) +#define RCC_MCO RCC_MCO1 /*!< MCO1 to be compliant with other families with 2 MCOs*/ + +/** + * @} + */ + +/** @defgroup RCC_MCOx_Clock_Prescaler MCO Clock Prescaler + * @{ + */ +#define RCC_MCODIV_1 ((uint32_t)RCC_CFGR_MCO_DIV1) +#define RCC_MCODIV_2 ((uint32_t)RCC_CFGR_MCO_DIV2) +#define RCC_MCODIV_4 ((uint32_t)RCC_CFGR_MCO_DIV4) +#define RCC_MCODIV_8 ((uint32_t)RCC_CFGR_MCO_DIV8) +#define RCC_MCODIV_16 ((uint32_t)RCC_CFGR_MCO_DIV16) + +/** + * @} + */ + +/** @defgroup RCC_MCO1_Clock_Source MCO1 Clock Source + * @{ + */ +#define RCC_MCO1SOURCE_NOCLOCK RCC_CFGR_MCO_NOCLOCK +#define RCC_MCO1SOURCE_SYSCLK RCC_CFGR_MCO_SYSCLK +#define RCC_MCO1SOURCE_MSI RCC_CFGR_MCO_MSI +#define RCC_MCO1SOURCE_HSI RCC_CFGR_MCO_HSI +#define RCC_MCO1SOURCE_LSE RCC_CFGR_MCO_LSE +#define RCC_MCO1SOURCE_LSI RCC_CFGR_MCO_LSI +#define RCC_MCO1SOURCE_HSE RCC_CFGR_MCO_HSE +#define RCC_MCO1SOURCE_PLLCLK RCC_CFGR_MCO_PLL + +/** + * @} + */ +/** @defgroup RCC_Interrupt Interrupts + * @{ + */ +#define RCC_IT_LSIRDY ((uint8_t)RCC_CIR_LSIRDYF) /*!< LSI Ready Interrupt flag */ +#define RCC_IT_LSERDY ((uint8_t)RCC_CIR_LSERDYF) /*!< LSE Ready Interrupt flag */ +#define RCC_IT_HSIRDY ((uint8_t)RCC_CIR_HSIRDYF) /*!< HSI Ready Interrupt flag */ +#define RCC_IT_HSERDY ((uint8_t)RCC_CIR_HSERDYF) /*!< HSE Ready Interrupt flag */ +#define RCC_IT_PLLRDY ((uint8_t)RCC_CIR_PLLRDYF) /*!< PLL Ready Interrupt flag */ +#define RCC_IT_MSIRDY ((uint8_t)RCC_CIR_MSIRDYF) /*!< MSI Ready Interrupt flag */ +#define RCC_IT_LSECSS ((uint8_t)RCC_CIR_LSECSSF) /*!< LSE Clock Security System Interrupt flag */ +#define RCC_IT_CSS ((uint8_t)RCC_CIR_CSSF) /*!< Clock Security System Interrupt flag */ +/** + * @} + */ + +/** @defgroup RCC_Flag Flags + * Elements values convention: XXXYYYYYb + * - YYYYY : Flag position in the register + * - XXX : Register index + * - 001: CR register + * - 010: CSR register + * @{ + */ +/* Flags in the CR register */ +#define RCC_FLAG_HSIRDY ((uint8_t)((CR_REG_INDEX << 5) | POSITION_VAL(RCC_CR_HSIRDY))) /*!< Internal High Speed clock ready flag */ +#define RCC_FLAG_MSIRDY ((uint8_t)((CR_REG_INDEX << 5) | POSITION_VAL(RCC_CR_MSIRDY))) /*!< MSI clock ready flag */ +#define RCC_FLAG_HSERDY ((uint8_t)((CR_REG_INDEX << 5) | POSITION_VAL(RCC_CR_HSERDY))) /*!< External High Speed clock ready flag */ +#define RCC_FLAG_PLLRDY ((uint8_t)((CR_REG_INDEX << 5) | POSITION_VAL(RCC_CR_PLLRDY))) /*!< PLL clock ready flag */ + +/* Flags in the CSR register */ +#define RCC_FLAG_LSIRDY ((uint8_t)((CSR_REG_INDEX << 5) | POSITION_VAL(RCC_CSR_LSIRDY))) /*!< Internal Low Speed oscillator Ready */ +#define RCC_FLAG_LSECSS ((uint8_t)((CSR_REG_INDEX << 5) | POSITION_VAL(RCC_CSR_LSECSSD))) /*!< CSS on LSE failure Detection */ +#define RCC_FLAG_OBLRST ((uint8_t)((CSR_REG_INDEX << 5) | POSITION_VAL(RCC_CSR_OBLRSTF))) /*!< Options bytes loading reset flag */ +#define RCC_FLAG_PINRST ((uint8_t)((CSR_REG_INDEX << 5) | POSITION_VAL(RCC_CSR_PINRSTF))) /*!< PIN reset flag */ +#define RCC_FLAG_PORRST ((uint8_t)((CSR_REG_INDEX << 5) | POSITION_VAL(RCC_CSR_PORRSTF))) /*!< POR/PDR reset flag */ +#define RCC_FLAG_SFTRST ((uint8_t)((CSR_REG_INDEX << 5) | POSITION_VAL(RCC_CSR_SFTRSTF))) /*!< Software Reset flag */ +#define RCC_FLAG_IWDGRST ((uint8_t)((CSR_REG_INDEX << 5) | POSITION_VAL(RCC_CSR_IWDGRSTF))) /*!< Independent Watchdog reset flag */ +#define RCC_FLAG_WWDGRST ((uint8_t)((CSR_REG_INDEX << 5) | POSITION_VAL(RCC_CSR_WWDGRSTF))) /*!< Window watchdog reset flag */ +#define RCC_FLAG_LPWRRST ((uint8_t)((CSR_REG_INDEX << 5) | POSITION_VAL(RCC_CSR_LPWRRSTF))) /*!< Low-Power reset flag */ +#define RCC_FLAG_LSERDY ((uint8_t)((CSR_REG_INDEX << 5) | POSITION_VAL(RCC_CSR_LSERDY))) /*!< External Low Speed oscillator Ready */ + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ + +/** @defgroup RCC_Exported_Macros RCC Exported Macros + * @{ + */ + +/** @defgroup RCC_Peripheral_Clock_Enable_Disable Peripheral Clock Enable Disable + * @brief Enable or disable the AHB1 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#define __HAL_RCC_GPIOA_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHBENR, RCC_AHBENR_GPIOAEN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_GPIOAEN);\ + UNUSED(tmpreg); \ + } while(0) +#define __HAL_RCC_GPIOB_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHBENR, RCC_AHBENR_GPIOBEN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_GPIOBEN);\ + UNUSED(tmpreg); \ + } while(0) +#define __HAL_RCC_GPIOC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHBENR, RCC_AHBENR_GPIOCEN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_GPIOCEN);\ + UNUSED(tmpreg); \ + } while(0) +#define __HAL_RCC_GPIOD_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHBENR, RCC_AHBENR_GPIODEN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_GPIODEN);\ + UNUSED(tmpreg); \ + } while(0) +#define __HAL_RCC_GPIOH_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHBENR, RCC_AHBENR_GPIOHEN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_GPIOHEN);\ + UNUSED(tmpreg); \ + } while(0) +#define __HAL_RCC_CRC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHBENR, RCC_AHBENR_CRCEN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_CRCEN);\ + UNUSED(tmpreg); \ + } while(0) +#define __HAL_RCC_FLITF_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHBENR, RCC_AHBENR_FLITFEN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_FLITFEN);\ + UNUSED(tmpreg); \ + } while(0) +#define __HAL_RCC_DMA1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHBENR, RCC_AHBENR_DMA1EN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_DMA1EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_GPIOA_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIOAEN)) +#define __HAL_RCC_GPIOB_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIOBEN)) +#define __HAL_RCC_GPIOC_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIOCEN)) +#define __HAL_RCC_GPIOD_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIODEN)) +#define __HAL_RCC_GPIOH_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIOHEN)) + +#define __HAL_RCC_CRC_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_CRCEN)) +#define __HAL_RCC_FLITF_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_FLITFEN)) +#define __HAL_RCC_DMA1_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_DMA1EN)) + +/** + * @} + */ + +/** @defgroup RCC_APB1_Clock_Enable_Disable APB1 Clock Enable Disable + * @brief Enable or disable the Low Speed APB (APB1) peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#define __HAL_RCC_TIM2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\ + UNUSED(tmpreg); \ + } while(0) +#define __HAL_RCC_TIM3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\ + UNUSED(tmpreg); \ + } while(0) +#define __HAL_RCC_TIM4_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\ + UNUSED(tmpreg); \ + } while(0) +#define __HAL_RCC_TIM6_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\ + UNUSED(tmpreg); \ + } while(0) +#define __HAL_RCC_TIM7_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\ + UNUSED(tmpreg); \ + } while(0) +#define __HAL_RCC_WWDG_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_WWDGEN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_WWDGEN);\ + UNUSED(tmpreg); \ + } while(0) +#define __HAL_RCC_SPI2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI2EN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI2EN);\ + UNUSED(tmpreg); \ + } while(0) +#define __HAL_RCC_USART2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USART2EN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART2EN);\ + UNUSED(tmpreg); \ + } while(0) +#define __HAL_RCC_USART3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\ + UNUSED(tmpreg); \ + } while(0) +#define __HAL_RCC_I2C1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C1EN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C1EN);\ + UNUSED(tmpreg); \ + } while(0) +#define __HAL_RCC_I2C2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C2EN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C2EN);\ + UNUSED(tmpreg); \ + } while(0) +#define __HAL_RCC_USB_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USBEN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USBEN);\ + UNUSED(tmpreg); \ + } while(0) +#define __HAL_RCC_PWR_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_PWREN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_PWREN);\ + UNUSED(tmpreg); \ + } while(0) +#define __HAL_RCC_DAC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\ + UNUSED(tmpreg); \ + } while(0) +#define __HAL_RCC_COMP_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_COMPEN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_COMPEN);\ + UNUSED(tmpreg); \ + } while(0) + + +#define __HAL_RCC_TIM2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM2EN)) +#define __HAL_RCC_TIM3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM3EN)) +#define __HAL_RCC_TIM4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM4EN)) +#define __HAL_RCC_TIM6_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM6EN)) +#define __HAL_RCC_TIM7_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM7EN)) +#define __HAL_RCC_WWDG_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_WWDGEN)) +#define __HAL_RCC_SPI2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI2EN)) +#define __HAL_RCC_USART2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART2EN)) +#define __HAL_RCC_USART3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART3EN)) +#define __HAL_RCC_I2C1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C1EN)) +#define __HAL_RCC_I2C2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C2EN)) +#define __HAL_RCC_USB_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USBEN)) +#define __HAL_RCC_PWR_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_PWREN)) +#define __HAL_RCC_DAC_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_DACEN)) +#define __HAL_RCC_COMP_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_COMPEN)) + +/** + * @} + */ + +/** @defgroup RCC_APB2_Clock_Enable_Disable APB2 Clock Enable Disable + * @brief Enable or disable the High Speed APB (APB2) peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#define __HAL_RCC_SYSCFG_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SYSCFGEN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SYSCFGEN);\ + UNUSED(tmpreg); \ + } while(0) +#define __HAL_RCC_TIM9_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM9EN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM9EN);\ + UNUSED(tmpreg); \ + } while(0) +#define __HAL_RCC_TIM10_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\ + UNUSED(tmpreg); \ + } while(0) +#define __HAL_RCC_TIM11_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM11EN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM11EN);\ + UNUSED(tmpreg); \ + } while(0) +#define __HAL_RCC_ADC1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC1EN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC1EN);\ + UNUSED(tmpreg); \ + } while(0) +#define __HAL_RCC_SPI1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI1EN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI1EN);\ + UNUSED(tmpreg); \ + } while(0) +#define __HAL_RCC_USART1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_USART1EN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_USART1EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_SYSCFG_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SYSCFGEN)) +#define __HAL_RCC_TIM9_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM9EN)) +#define __HAL_RCC_TIM10_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM10EN)) +#define __HAL_RCC_TIM11_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM11EN)) +#define __HAL_RCC_ADC1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC1EN)) +#define __HAL_RCC_SPI1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI1EN)) +#define __HAL_RCC_USART1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_USART1EN)) + +/** + * @} + */ + +/** @defgroup RCC_Peripheral_Clock_Force_Release RCC Peripheral Clock Force Release + * @brief Force or release AHB peripheral reset. + * @{ + */ +#define __HAL_RCC_AHB_FORCE_RESET() (RCC->AHBRSTR = 0xFFFFFFFFU) +#define __HAL_RCC_GPIOA_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIOARST)) +#define __HAL_RCC_GPIOB_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIOBRST)) +#define __HAL_RCC_GPIOC_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIOCRST)) +#define __HAL_RCC_GPIOD_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIODRST)) +#define __HAL_RCC_GPIOH_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIOHRST)) + +#define __HAL_RCC_CRC_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_CRCRST)) +#define __HAL_RCC_FLITF_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_FLITFRST)) +#define __HAL_RCC_DMA1_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_DMA1RST)) + +#define __HAL_RCC_AHB_RELEASE_RESET() (RCC->AHBRSTR = 0x00000000U) +#define __HAL_RCC_GPIOA_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIOARST)) +#define __HAL_RCC_GPIOB_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIOBRST)) +#define __HAL_RCC_GPIOC_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIOCRST)) +#define __HAL_RCC_GPIOD_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIODRST)) +#define __HAL_RCC_GPIOH_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIOHRST)) + +#define __HAL_RCC_CRC_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_CRCRST)) +#define __HAL_RCC_FLITF_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_FLITFRST)) +#define __HAL_RCC_DMA1_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_DMA1RST)) + +/** + * @} + */ + +/** @defgroup RCC_APB1_Force_Release_Reset APB1 Force Release Reset + * @brief Force or release APB1 peripheral reset. + * @{ + */ +#define __HAL_RCC_APB1_FORCE_RESET() (RCC->APB1RSTR = 0xFFFFFFFFU) +#define __HAL_RCC_TIM2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM2RST)) +#define __HAL_RCC_TIM3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM3RST)) +#define __HAL_RCC_TIM4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM4RST)) +#define __HAL_RCC_TIM6_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM6RST)) +#define __HAL_RCC_TIM7_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM7RST)) +#define __HAL_RCC_WWDG_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_WWDGRST)) +#define __HAL_RCC_SPI2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI2RST)) +#define __HAL_RCC_USART2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART2RST)) +#define __HAL_RCC_USART3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART3RST)) +#define __HAL_RCC_I2C1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C1RST)) +#define __HAL_RCC_I2C2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C2RST)) +#define __HAL_RCC_USB_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USBRST)) +#define __HAL_RCC_PWR_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_PWRRST)) +#define __HAL_RCC_DAC_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_DACRST)) +#define __HAL_RCC_COMP_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_COMPRST)) + +#define __HAL_RCC_APB1_RELEASE_RESET() (RCC->APB1RSTR = 0x00000000U) +#define __HAL_RCC_TIM2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM2RST)) +#define __HAL_RCC_TIM3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM3RST)) +#define __HAL_RCC_TIM4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM4RST)) +#define __HAL_RCC_TIM6_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM6RST)) +#define __HAL_RCC_TIM7_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM7RST)) +#define __HAL_RCC_WWDG_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_WWDGRST)) +#define __HAL_RCC_SPI2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI2RST)) +#define __HAL_RCC_USART2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART2RST)) +#define __HAL_RCC_USART3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART3RST)) +#define __HAL_RCC_I2C1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C1RST)) +#define __HAL_RCC_I2C2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C2RST)) +#define __HAL_RCC_USB_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USBRST)) +#define __HAL_RCC_PWR_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_PWRRST)) +#define __HAL_RCC_DAC_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_DACRST)) +#define __HAL_RCC_COMP_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_COMPRST)) + +/** + * @} + */ + +/** @defgroup RCC_APB2_Force_Release_Reset APB2 Force Release Reset + * @brief Force or release APB1 peripheral reset. + * @{ + */ +#define __HAL_RCC_APB2_FORCE_RESET() (RCC->APB2RSTR = 0xFFFFFFFFU) +#define __HAL_RCC_SYSCFG_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SYSCFGRST)) +#define __HAL_RCC_TIM9_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM9RST)) +#define __HAL_RCC_TIM10_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM10RST)) +#define __HAL_RCC_TIM11_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM11RST)) +#define __HAL_RCC_ADC1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_ADC1RST)) +#define __HAL_RCC_SPI1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI1RST)) +#define __HAL_RCC_USART1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_USART1RST)) + +#define __HAL_RCC_APB2_RELEASE_RESET() (RCC->APB2RSTR = 0x00000000U) +#define __HAL_RCC_SYSCFG_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SYSCFGRST)) +#define __HAL_RCC_TIM9_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM9RST)) +#define __HAL_RCC_TIM10_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM10RST)) +#define __HAL_RCC_TIM11_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM11RST)) +#define __HAL_RCC_ADC1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_ADC1RST)) +#define __HAL_RCC_SPI1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI1RST)) +#define __HAL_RCC_USART1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_USART1RST)) + +/** + * @} + */ + +/** @defgroup RCC_Peripheral_Clock_Sleep_Enable_Disable RCC Peripheral Clock Sleep Enable Disable + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ +#define __HAL_RCC_GPIOA_CLK_SLEEP_ENABLE() (RCC->AHBLPENR |= (RCC_AHBLPENR_GPIOALPEN)) +#define __HAL_RCC_GPIOB_CLK_SLEEP_ENABLE() (RCC->AHBLPENR |= (RCC_AHBLPENR_GPIOBLPEN)) +#define __HAL_RCC_GPIOC_CLK_SLEEP_ENABLE() (RCC->AHBLPENR |= (RCC_AHBLPENR_GPIOCLPEN)) +#define __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE() (RCC->AHBLPENR |= (RCC_AHBLPENR_GPIODLPEN)) +#define __HAL_RCC_GPIOH_CLK_SLEEP_ENABLE() (RCC->AHBLPENR |= (RCC_AHBLPENR_GPIOHLPEN)) + +#define __HAL_RCC_CRC_CLK_SLEEP_ENABLE() (RCC->AHBLPENR |= (RCC_AHBLPENR_CRCLPEN)) +#define __HAL_RCC_FLITF_CLK_SLEEP_ENABLE() (RCC->AHBLPENR |= (RCC_AHBLPENR_FLITFLPEN)) +#define __HAL_RCC_DMA1_CLK_SLEEP_ENABLE() (RCC->AHBLPENR |= (RCC_AHBLPENR_DMA1LPEN)) + +#define __HAL_RCC_GPIOA_CLK_SLEEP_DISABLE() (RCC->AHBLPENR &= ~(RCC_AHBLPENR_GPIOALPEN)) +#define __HAL_RCC_GPIOB_CLK_SLEEP_DISABLE() (RCC->AHBLPENR &= ~(RCC_AHBLPENR_GPIOBLPEN)) +#define __HAL_RCC_GPIOC_CLK_SLEEP_DISABLE() (RCC->AHBLPENR &= ~(RCC_AHBLPENR_GPIOCLPEN)) +#define __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE() (RCC->AHBLPENR &= ~(RCC_AHBLPENR_GPIODLPEN)) +#define __HAL_RCC_GPIOH_CLK_SLEEP_DISABLE() (RCC->AHBLPENR &= ~(RCC_AHBLPENR_GPIOHLPEN)) + +#define __HAL_RCC_CRC_CLK_SLEEP_DISABLE() (RCC->AHBLPENR &= ~(RCC_AHBLPENR_CRCLPEN)) +#define __HAL_RCC_FLITF_CLK_SLEEP_DISABLE() (RCC->AHBLPENR &= ~(RCC_AHBLPENR_FLITFLPEN)) +#define __HAL_RCC_DMA1_CLK_SLEEP_DISABLE() (RCC->AHBLPENR &= ~(RCC_AHBLPENR_DMA1LPEN)) + +/** @brief Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + */ +#define __HAL_RCC_TIM2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM2LPEN)) +#define __HAL_RCC_TIM3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM3LPEN)) +#define __HAL_RCC_TIM4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM4LPEN)) +#define __HAL_RCC_TIM6_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM6LPEN)) +#define __HAL_RCC_TIM7_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM7LPEN)) +#define __HAL_RCC_WWDG_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_WWDGLPEN)) +#define __HAL_RCC_SPI2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_SPI2LPEN)) +#define __HAL_RCC_USART2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_USART2LPEN)) +#define __HAL_RCC_USART3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_USART3LPEN)) +#define __HAL_RCC_I2C1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_I2C1LPEN)) +#define __HAL_RCC_I2C2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_I2C2LPEN)) +#define __HAL_RCC_USB_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_USBLPEN)) +#define __HAL_RCC_PWR_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_PWRLPEN)) +#define __HAL_RCC_DAC_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_DACLPEN)) +#define __HAL_RCC_COMP_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_COMPLPEN)) + +#define __HAL_RCC_TIM2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM2LPEN)) +#define __HAL_RCC_TIM3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM3LPEN)) +#define __HAL_RCC_TIM4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM4LPEN)) +#define __HAL_RCC_TIM6_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM6LPEN)) +#define __HAL_RCC_TIM7_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM7LPEN)) +#define __HAL_RCC_WWDG_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_WWDGLPEN)) +#define __HAL_RCC_SPI2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_SPI2LPEN)) +#define __HAL_RCC_USART2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_USART2LPEN)) +#define __HAL_RCC_USART3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_USART3LPEN)) +#define __HAL_RCC_I2C1_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_I2C1LPEN)) +#define __HAL_RCC_I2C2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_I2C2LPEN)) +#define __HAL_RCC_USB_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_USBLPEN)) +#define __HAL_RCC_PWR_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_PWRLPEN)) +#define __HAL_RCC_DAC_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_DACLPEN)) +#define __HAL_RCC_COMP_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_COMPLPEN)) + +/** @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + */ +#define __HAL_RCC_SYSCFG_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SYSCFGLPEN)) +#define __HAL_RCC_TIM9_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM9LPEN)) +#define __HAL_RCC_TIM10_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM10LPEN)) +#define __HAL_RCC_TIM11_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM11LPEN)) +#define __HAL_RCC_ADC1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC1LPEN)) +#define __HAL_RCC_SPI1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI1LPEN)) +#define __HAL_RCC_USART1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_USART1LPEN)) + +#define __HAL_RCC_SYSCFG_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SYSCFGLPEN)) +#define __HAL_RCC_TIM9_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM9LPEN)) +#define __HAL_RCC_TIM10_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM10LPEN)) +#define __HAL_RCC_TIM11_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM11LPEN)) +#define __HAL_RCC_ADC1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC1LPEN)) +#define __HAL_RCC_SPI1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI1LPEN)) +#define __HAL_RCC_USART1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_USART1LPEN)) + +/** + * @} + */ + +/** @defgroup RCC_AHB_Peripheral_Clock_Enable_Disable_Status AHB Peripheral Clock Enable Disable Status + * @brief Get the enable or disable status of the AHB peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#define __HAL_RCC_GPIOA_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIOAEN)) != RESET) +#define __HAL_RCC_GPIOB_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIOBEN)) != RESET) +#define __HAL_RCC_GPIOC_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIOCEN)) != RESET) +#define __HAL_RCC_GPIOD_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIODEN)) != RESET) +#define __HAL_RCC_GPIOH_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIOHEN)) != RESET) +#define __HAL_RCC_CRC_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_CRCEN)) != RESET) +#define __HAL_RCC_FLITF_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_FLITFEN)) != RESET) +#define __HAL_RCC_DMA1_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_DMA1EN)) != RESET) +#define __HAL_RCC_GPIOA_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIOAEN)) == RESET) +#define __HAL_RCC_GPIOB_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIOBEN)) == RESET) +#define __HAL_RCC_GPIOC_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIOCEN)) == RESET) +#define __HAL_RCC_GPIOD_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIODEN)) == RESET) +#define __HAL_RCC_GPIOH_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIOHEN)) == RESET) +#define __HAL_RCC_CRC_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_CRCEN)) == RESET) +#define __HAL_RCC_FLITF_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_FLITFEN)) == RESET) +#define __HAL_RCC_DMA1_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_DMA1EN)) == RESET) + +/** + * @} + */ + +/** @defgroup RCC_APB1_Peripheral_Clock_Enable_Disable_Status APB1 Peripheral Clock Enable Disable Status + * @brief Get the enable or disable status of the APB1 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#define __HAL_RCC_TIM2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) != RESET) +#define __HAL_RCC_TIM3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) != RESET) +#define __HAL_RCC_TIM4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) != RESET) +#define __HAL_RCC_TIM6_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) != RESET) +#define __HAL_RCC_TIM7_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) != RESET) +#define __HAL_RCC_WWDG_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_WWDGEN)) != RESET) +#define __HAL_RCC_SPI2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI2EN)) != RESET) +#define __HAL_RCC_USART2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART2EN)) != RESET) +#define __HAL_RCC_USART3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART3EN)) != RESET) +#define __HAL_RCC_I2C1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C1EN)) != RESET) +#define __HAL_RCC_I2C2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C2EN)) != RESET) +#define __HAL_RCC_USB_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USBEN)) != RESET) +#define __HAL_RCC_PWR_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_PWREN)) != RESET) +#define __HAL_RCC_DAC_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DACEN)) != RESET) +#define __HAL_RCC_COMP_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_COMPEN)) != RESET) +#define __HAL_RCC_TIM2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) == RESET) +#define __HAL_RCC_TIM3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) == RESET) +#define __HAL_RCC_TIM4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) == RESET) +#define __HAL_RCC_TIM6_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) == RESET) +#define __HAL_RCC_TIM7_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) == RESET) +#define __HAL_RCC_WWDG_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_WWDGEN)) == RESET) +#define __HAL_RCC_SPI2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI2EN)) == RESET) +#define __HAL_RCC_USART2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART2EN)) == RESET) +#define __HAL_RCC_USART3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART3EN)) == RESET) +#define __HAL_RCC_I2C1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C1EN)) == RESET) +#define __HAL_RCC_I2C2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C2EN)) == RESET) +#define __HAL_RCC_USB_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USBEN)) == RESET) +#define __HAL_RCC_PWR_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_PWREN)) == RESET) +#define __HAL_RCC_DAC_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DACEN)) == RESET) +#define __HAL_RCC_COMP_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_COMPEN)) == RESET) + +/** + * @} + */ + +/** @defgroup RCC_APB2_Peripheral_Clock_Enable_Disable_Status APB2 Peripheral Clock Enable Disable Status + * @brief Get the enable or disable status of the APB2 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#define __HAL_RCC_SYSCFG_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SYSCFGEN)) != RESET) +#define __HAL_RCC_TIM9_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM9EN)) != RESET) +#define __HAL_RCC_TIM10_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN)) != RESET) +#define __HAL_RCC_TIM11_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM11EN)) != RESET) +#define __HAL_RCC_ADC1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC1EN)) != RESET) +#define __HAL_RCC_SPI1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI1EN)) != RESET) +#define __HAL_RCC_USART1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART1EN)) != RESET) +#define __HAL_RCC_SYSCFG_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SYSCFGEN)) == RESET) +#define __HAL_RCC_TIM9_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM9EN)) == RESET) +#define __HAL_RCC_TIM10_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN)) == RESET) +#define __HAL_RCC_TIM11_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM11EN)) == RESET) +#define __HAL_RCC_ADC1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC1EN)) == RESET) +#define __HAL_RCC_SPI1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI1EN)) == RESET) +#define __HAL_RCC_USART1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART1EN)) == RESET) + +/** + * @} + */ + +/** @defgroup RCC_AHB_Clock_Sleep_Enable_Disable_Status AHB Peripheral Clock Sleep Enable Disable Status + * @brief Get the enable or disable status of the AHB peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ + +#define __HAL_RCC_GPIOA_IS_CLK_SLEEP_ENABLED() ((RCC->AHBLPENR & (RCC_AHBLPENR_GPIOALPEN)) != RESET) +#define __HAL_RCC_GPIOB_IS_CLK_SLEEP_ENABLED() ((RCC->AHBLPENR & (RCC_AHBLPENR_GPIOBLPEN)) != RESET) +#define __HAL_RCC_GPIOC_IS_CLK_SLEEP_ENABLED() ((RCC->AHBLPENR & (RCC_AHBLPENR_GPIOCLPEN)) != RESET) +#define __HAL_RCC_GPIOD_IS_CLK_SLEEP_ENABLED() ((RCC->AHBLPENR & (RCC_AHBLPENR_GPIODLPEN)) != RESET) +#define __HAL_RCC_GPIOH_IS_CLK_SLEEP_ENABLED() ((RCC->AHBLPENR & (RCC_AHBLPENR_GPIOHLPEN)) != RESET) +#define __HAL_RCC_CRC_IS_CLK_SLEEP_ENABLED() ((RCC->AHBLPENR & (RCC_AHBLPENR_CRCLPEN)) != RESET) +#define __HAL_RCC_FLITF_IS_CLK_SLEEP_ENABLED() ((RCC->AHBLPENR & (RCC_AHBLPENR_FLITFLPEN)) != RESET) +#define __HAL_RCC_DMA1_IS_CLK_SLEEP_ENABLED() ((RCC->AHBLPENR & (RCC_AHBLPENR_DMA1LPEN)) != RESET) +#define __HAL_RCC_GPIOA_IS_CLK_SLEEP_DISABLED() ((RCC->AHBLPENR & (RCC_AHBLPENR_GPIOALPEN)) == RESET) +#define __HAL_RCC_GPIOB_IS_CLK_SLEEP_DISABLED() ((RCC->AHBLPENR & (RCC_AHBLPENR_GPIOBLPEN)) == RESET) +#define __HAL_RCC_GPIOC_IS_CLK_SLEEP_DISABLED() ((RCC->AHBLPENR & (RCC_AHBLPENR_GPIOCLPEN)) == RESET) +#define __HAL_RCC_GPIOD_IS_CLK_SLEEP_DISABLED() ((RCC->AHBLPENR & (RCC_AHBLPENR_GPIODLPEN)) == RESET) +#define __HAL_RCC_GPIOH_IS_CLK_SLEEP_DISABLED() ((RCC->AHBLPENR & (RCC_AHBLPENR_GPIOHLPEN)) == RESET) +#define __HAL_RCC_CRC_IS_CLK_SLEEP_DISABLED() ((RCC->AHBLPENR & (RCC_AHBLPENR_CRCLPEN)) == RESET) +#define __HAL_RCC_FLITF_IS_CLK_SLEEP_DISABLED() ((RCC->AHBLPENR & (RCC_AHBLPENR_FLITFLPEN)) == RESET) +#define __HAL_RCC_DMA1_IS_CLK_SLEEP_DISABLED() ((RCC->AHBLPENR & (RCC_AHBLPENR_DMA1LPEN)) == RESET) + +/** + * @} + */ + +/** @defgroup RCC_APB1_Clock_Sleep_Enable_Disable_Status APB1 Peripheral Clock Sleep Enable Disable Status + * @brief Get the enable or disable status of the APB1 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ + +#define __HAL_RCC_TIM2_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM2LPEN)) != RESET) +#define __HAL_RCC_TIM3_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM3LPEN)) != RESET) +#define __HAL_RCC_TIM4_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM4LPEN)) != RESET) +#define __HAL_RCC_TIM6_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM6LPEN)) != RESET) +#define __HAL_RCC_TIM7_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM7LPEN)) != RESET) +#define __HAL_RCC_WWDG_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_WWDGLPEN)) != RESET) +#define __HAL_RCC_SPI2_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_SPI2LPEN)) != RESET) +#define __HAL_RCC_USART2_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_USART2LPEN)) != RESET) +#define __HAL_RCC_USART3_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_USART3LPEN)) != RESET) +#define __HAL_RCC_I2C1_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_I2C1LPEN)) != RESET) +#define __HAL_RCC_I2C2_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_I2C2LPEN)) != RESET) +#define __HAL_RCC_USB_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_USBLPEN)) != RESET) +#define __HAL_RCC_PWR_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_PWRLPEN)) != RESET) +#define __HAL_RCC_DAC_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_DACLPEN)) != RESET) +#define __HAL_RCC_COMP_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_COMPLPEN)) != RESET) +#define __HAL_RCC_TIM2_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM2LPEN)) == RESET) +#define __HAL_RCC_TIM3_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM3LPEN)) == RESET) +#define __HAL_RCC_TIM4_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM4LPEN)) == RESET) +#define __HAL_RCC_TIM6_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM6LPEN)) == RESET) +#define __HAL_RCC_TIM7_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM7LPEN)) == RESET) +#define __HAL_RCC_WWDG_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_WWDGLPEN)) == RESET) +#define __HAL_RCC_SPI2_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_SPI2LPEN)) == RESET) +#define __HAL_RCC_USART2_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_USART2LPEN)) == RESET) +#define __HAL_RCC_USART3_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_USART3LPEN)) == RESET) +#define __HAL_RCC_I2C1_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_I2C1LPEN)) == RESET) +#define __HAL_RCC_I2C2_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_I2C2LPEN)) == RESET) +#define __HAL_RCC_USB_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_USBLPEN)) == RESET) +#define __HAL_RCC_PWR_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_PWRLPEN)) == RESET) +#define __HAL_RCC_DAC_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_DACLPEN)) == RESET) +#define __HAL_RCC_COMP_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_COMPLPEN)) == RESET) + +/** + * @} + */ + +/** @defgroup RCC_APB2_Clock_Sleep_Enable_Disable_Status APB2 Peripheral Clock Sleep Enable Disable Status + * @brief Get the enable or disable status of the APB2 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ + +#define __HAL_RCC_SYSCFG_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SYSCFGLPEN)) != RESET) +#define __HAL_RCC_TIM9_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_TIM9LPEN)) != RESET) +#define __HAL_RCC_TIM10_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_TIM10LPEN)) != RESET) +#define __HAL_RCC_TIM11_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_TIM11LPEN)) != RESET) +#define __HAL_RCC_ADC1_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_ADC1LPEN)) != RESET) +#define __HAL_RCC_SPI1_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SPI1LPEN)) != RESET) +#define __HAL_RCC_USART1_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_USART1LPEN)) != RESET) +#define __HAL_RCC_SYSCFG_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SYSCFGLPEN)) == RESET) +#define __HAL_RCC_TIM9_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_TIM9LPEN)) == RESET) +#define __HAL_RCC_TIM10_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_TIM10LPEN)) == RESET) +#define __HAL_RCC_TIM11_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_TIM11LPEN)) == RESET) +#define __HAL_RCC_ADC1_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_ADC1LPEN)) == RESET) +#define __HAL_RCC_SPI1_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SPI1LPEN)) == RESET) +#define __HAL_RCC_USART1_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_USART1LPEN)) == RESET) + +/** + * @} + */ + +/** @defgroup RCC_HSI_Configuration HSI Configuration + * @{ + */ + +/** @brief Macros to enable or disable the Internal High Speed oscillator (HSI). + * @note The HSI is stopped by hardware when entering STOP and STANDBY modes. + * @note HSI can not be stopped if it is used as system clock source. In this case, + * you have to select another source of the system clock then stop the HSI. + * @note After enabling the HSI, the application software should wait on HSIRDY + * flag to be set indicating that HSI clock is stable and can be used as + * system clock source. + * @note When the HSI is stopped, HSIRDY flag goes low after 6 HSI oscillator + * clock cycles. + */ +#define __HAL_RCC_HSI_ENABLE() (*(__IO uint32_t *) RCC_CR_HSION_BB = ENABLE) +#define __HAL_RCC_HSI_DISABLE() (*(__IO uint32_t *) RCC_CR_HSION_BB = DISABLE) + +/** @brief Macro to adjust the Internal High Speed oscillator (HSI) calibration value. + * @note The calibration is used to compensate for the variations in voltage + * and temperature that influence the frequency of the internal HSI RC. + * @param _HSICALIBRATIONVALUE_ specifies the calibration trimming value. + * (default is RCC_HSICALIBRATION_DEFAULT). + * This parameter must be a number between 0 and 0x1F. + */ +#define __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(_HSICALIBRATIONVALUE_) \ + (MODIFY_REG(RCC->ICSCR, RCC_ICSCR_HSITRIM, (uint32_t)(_HSICALIBRATIONVALUE_) << POSITION_VAL(RCC_ICSCR_HSITRIM))) + +/** + * @} + */ + +/** @defgroup RCC_LSI_Configuration LSI Configuration + * @{ + */ + +/** @brief Macro to enable the Internal Low Speed oscillator (LSI). + * @note After enabling the LSI, the application software should wait on + * LSIRDY flag to be set indicating that LSI clock is stable and can + * be used to clock the IWDG and/or the RTC. + */ +#define __HAL_RCC_LSI_ENABLE() (*(__IO uint32_t *) RCC_CSR_LSION_BB = ENABLE) + +/** @brief Macro to disable the Internal Low Speed oscillator (LSI). + * @note LSI can not be disabled if the IWDG is running. + * @note When the LSI is stopped, LSIRDY flag goes low after 6 LSI oscillator + * clock cycles. + */ +#define __HAL_RCC_LSI_DISABLE() (*(__IO uint32_t *) RCC_CSR_LSION_BB = DISABLE) + +/** + * @} + */ + +/** @defgroup RCC_HSE_Configuration HSE Configuration + * @{ + */ + +/** + * @brief Macro to configure the External High Speed oscillator (HSE). + * @note Transition HSE Bypass to HSE On and HSE On to HSE Bypass are not + * supported by this macro. User should request a transition to HSE Off + * first and then HSE On or HSE Bypass. + * @note After enabling the HSE (RCC_HSE_ON or RCC_HSE_Bypass), the application + * software should wait on HSERDY flag to be set indicating that HSE clock + * is stable and can be used to clock the PLL and/or system clock. + * @note HSE state can not be changed if it is used directly or through the + * PLL as system clock. In this case, you have to select another source + * of the system clock then change the HSE state (ex. disable it). + * @note The HSE is stopped by hardware when entering STOP and STANDBY modes. + * @note This function reset the CSSON bit, so if the clock security system(CSS) + * was previously enabled you have to enable it again after calling this + * function. + * @param __STATE__ specifies the new state of the HSE. + * This parameter can be one of the following values: + * @arg @ref RCC_HSE_OFF turn OFF the HSE oscillator, HSERDY flag goes low after + * 6 HSE oscillator clock cycles. + * @arg @ref RCC_HSE_ON turn ON the HSE oscillator + * @arg @ref RCC_HSE_BYPASS HSE oscillator bypassed with external clock + */ +#define __HAL_RCC_HSE_CONFIG(__STATE__) \ + do{ \ + if ((__STATE__) == RCC_HSE_ON) \ + { \ + SET_BIT(RCC->CR, RCC_CR_HSEON); \ + } \ + else if ((__STATE__) == RCC_HSE_OFF) \ + { \ + CLEAR_BIT(RCC->CR, RCC_CR_HSEON); \ + CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP); \ + } \ + else if ((__STATE__) == RCC_HSE_BYPASS) \ + { \ + SET_BIT(RCC->CR, RCC_CR_HSEBYP); \ + SET_BIT(RCC->CR, RCC_CR_HSEON); \ + } \ + else \ + { \ + CLEAR_BIT(RCC->CR, RCC_CR_HSEON); \ + CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP); \ + } \ + }while(0) + +/** + * @} + */ + +/** @defgroup RCC_LSE_Configuration LSE Configuration + * @{ + */ + +/** + * @brief Macro to configure the External Low Speed oscillator (LSE). + * @note Transitions LSE Bypass to LSE On and LSE On to LSE Bypass are not supported by this macro. + * @note As the LSE is in the Backup domain and write access is denied to + * this domain after reset, you have to enable write access using + * @ref HAL_PWR_EnableBkUpAccess() function before to configure the LSE + * (to be done once after reset). + * @note After enabling the LSE (RCC_LSE_ON or RCC_LSE_BYPASS), the application + * software should wait on LSERDY flag to be set indicating that LSE clock + * is stable and can be used to clock the RTC. + * @param __STATE__ specifies the new state of the LSE. + * This parameter can be one of the following values: + * @arg @ref RCC_LSE_OFF turn OFF the LSE oscillator, LSERDY flag goes low after + * 6 LSE oscillator clock cycles. + * @arg @ref RCC_LSE_ON turn ON the LSE oscillator. + * @arg @ref RCC_LSE_BYPASS LSE oscillator bypassed with external clock. + */ +#define __HAL_RCC_LSE_CONFIG(__STATE__) \ + do{ \ + if ((__STATE__) == RCC_LSE_ON) \ + { \ + SET_BIT(RCC->CSR, RCC_CSR_LSEON); \ + } \ + else if ((__STATE__) == RCC_LSE_OFF) \ + { \ + CLEAR_BIT(RCC->CSR, RCC_CSR_LSEON); \ + CLEAR_BIT(RCC->CSR, RCC_CSR_LSEBYP); \ + } \ + else if ((__STATE__) == RCC_LSE_BYPASS) \ + { \ + SET_BIT(RCC->CSR, RCC_CSR_LSEBYP); \ + SET_BIT(RCC->CSR, RCC_CSR_LSEON); \ + } \ + else \ + { \ + CLEAR_BIT(RCC->CSR, RCC_CSR_LSEON); \ + CLEAR_BIT(RCC->CSR, RCC_CSR_LSEBYP); \ + } \ + }while(0) + +/** + * @} + */ + +/** @defgroup RCC_MSI_Configuration MSI Configuration + * @{ + */ + +/** @brief Macro to enable Internal Multi Speed oscillator (MSI). + * @note After enabling the MSI, the application software should wait on MSIRDY + * flag to be set indicating that MSI clock is stable and can be used as + * system clock source. + */ +#define __HAL_RCC_MSI_ENABLE() (*(__IO uint32_t *) RCC_CR_MSION_BB = ENABLE) + +/** @brief Macro to disable the Internal Multi Speed oscillator (MSI). + * @note The MSI is stopped by hardware when entering STOP and STANDBY modes. + * It is used (enabled by hardware) as system clock source after startup + * from Reset, wakeup from STOP and STANDBY mode, or in case of failure + * of the HSE used directly or indirectly as system clock (if the Clock + * Security System CSS is enabled). + * @note MSI can not be stopped if it is used as system clock source. In this case, + * you have to select another source of the system clock then stop the MSI. + * @note When the MSI is stopped, MSIRDY flag goes low after 6 MSI oscillator + * clock cycles. + */ +#define __HAL_RCC_MSI_DISABLE() (*(__IO uint32_t *) RCC_CR_MSION_BB = DISABLE) + +/** @brief Macro adjusts Internal Multi Speed oscillator (MSI) calibration value. + * @note The calibration is used to compensate for the variations in voltage + * and temperature that influence the frequency of the internal MSI RC. + * @param _MSICALIBRATIONVALUE_ specifies the calibration trimming value. + * (default is RCC_MSICALIBRATION_DEFAULT). + * This parameter must be a number between 0 and 0xFF. + */ +#define __HAL_RCC_MSI_CALIBRATIONVALUE_ADJUST(_MSICALIBRATIONVALUE_) \ + (MODIFY_REG(RCC->ICSCR, RCC_ICSCR_MSITRIM, (uint32_t)(_MSICALIBRATIONVALUE_) << POSITION_VAL(RCC_ICSCR_MSITRIM))) + +/* @brief Macro to configures the Internal Multi Speed oscillator (MSI) clock range. + * @note After restart from Reset or wakeup from STANDBY, the MSI clock is + * around 2.097 MHz. The MSI clock does not change after wake-up from + * STOP mode. + * @note The MSI clock range can be modified on the fly. + * @param _MSIRANGEVALUE_ specifies the MSI Clock range. + * This parameter must be one of the following values: + * @arg @ref RCC_MSIRANGE_0 MSI clock is around 65.536 KHz + * @arg @ref RCC_MSIRANGE_1 MSI clock is around 131.072 KHz + * @arg @ref RCC_MSIRANGE_2 MSI clock is around 262.144 KHz + * @arg @ref RCC_MSIRANGE_3 MSI clock is around 524.288 KHz + * @arg @ref RCC_MSIRANGE_4 MSI clock is around 1.048 MHz + * @arg @ref RCC_MSIRANGE_5 MSI clock is around 2.097 MHz (default after Reset or wake-up from STANDBY) + * @arg @ref RCC_MSIRANGE_6 MSI clock is around 4.194 MHz + */ +#define __HAL_RCC_MSI_RANGE_CONFIG(_MSIRANGEVALUE_) (MODIFY_REG(RCC->ICSCR, \ + RCC_ICSCR_MSIRANGE, (uint32_t)(_MSIRANGEVALUE_))) + +/** @brief Macro to get the Internal Multi Speed oscillator (MSI) clock range in run mode + * @retval MSI clock range. + * This parameter must be one of the following values: + * @arg @ref RCC_MSIRANGE_0 MSI clock is around 65.536 KHz + * @arg @ref RCC_MSIRANGE_1 MSI clock is around 131.072 KHz + * @arg @ref RCC_MSIRANGE_2 MSI clock is around 262.144 KHz + * @arg @ref RCC_MSIRANGE_3 MSI clock is around 524.288 KHz + * @arg @ref RCC_MSIRANGE_4 MSI clock is around 1.048 MHz + * @arg @ref RCC_MSIRANGE_5 MSI clock is around 2.097 MHz (default after Reset or wake-up from STANDBY) + * @arg @ref RCC_MSIRANGE_6 MSI clock is around 4.194 MHz + */ +#define __HAL_RCC_GET_MSI_RANGE() (uint32_t)(READ_BIT(RCC->ICSCR, RCC_ICSCR_MSIRANGE)) + +/** + * @} + */ + +/** @defgroup RCC_PLL_Configuration PLL Configuration + * @{ + */ + +/** @brief Macro to enable the main PLL. + * @note After enabling the main PLL, the application software should wait on + * PLLRDY flag to be set indicating that PLL clock is stable and can + * be used as system clock source. + * @note The main PLL is disabled by hardware when entering STOP and STANDBY modes. + */ +#define __HAL_RCC_PLL_ENABLE() (*(__IO uint32_t *) RCC_CR_PLLON_BB = ENABLE) + +/** @brief Macro to disable the main PLL. + * @note The main PLL can not be disabled if it is used as system clock source + */ +#define __HAL_RCC_PLL_DISABLE() (*(__IO uint32_t *) RCC_CR_PLLON_BB = DISABLE) + +/** @brief Macro to configure the main PLL clock source, multiplication and division factors. + * @note This function must be used only when the main PLL is disabled. + * + * @param __RCC_PLLSOURCE__ specifies the PLL entry clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_PLLSOURCE_HSI HSI oscillator clock selected as PLL clock entry + * @arg @ref RCC_PLLSOURCE_HSE HSE oscillator clock selected as PLL clock entry + * @param __PLLMUL__ specifies the multiplication factor for PLL VCO output clock + * This parameter can be one of the following values: + * @arg @ref RCC_PLL_MUL3 PLLVCO = PLL clock entry x 3 + * @arg @ref RCC_PLL_MUL4 PLLVCO = PLL clock entry x 4 + * @arg @ref RCC_PLL_MUL6 PLLVCO = PLL clock entry x 6 + * @arg @ref RCC_PLL_MUL8 PLLVCO = PLL clock entry x 8 + * @arg @ref RCC_PLL_MUL12 PLLVCO = PLL clock entry x 12 + * @arg @ref RCC_PLL_MUL16 PLLVCO = PLL clock entry x 16 + * @arg @ref RCC_PLL_MUL24 PLLVCO = PLL clock entry x 24 + * @arg @ref RCC_PLL_MUL32 PLLVCO = PLL clock entry x 32 + * @arg @ref RCC_PLL_MUL48 PLLVCO = PLL clock entry x 48 + * @note The PLL VCO clock frequency must not exceed 96 MHz when the product is in + * Range 1, 48 MHz when the product is in Range 2 and 24 MHz when the product is + * in Range 3. + * + * @param __PLLDIV__ specifies the division factor for PLL VCO input clock + * This parameter can be one of the following values: + * @arg @ref RCC_PLL_DIV2 PLL clock output = PLLVCO / 2 + * @arg @ref RCC_PLL_DIV3 PLL clock output = PLLVCO / 3 + * @arg @ref RCC_PLL_DIV4 PLL clock output = PLLVCO / 4 + * + */ +#define __HAL_RCC_PLL_CONFIG(__RCC_PLLSOURCE__, __PLLMUL__, __PLLDIV__)\ + MODIFY_REG(RCC->CFGR, (RCC_CFGR_PLLSRC|RCC_CFGR_PLLMUL|RCC_CFGR_PLLDIV),((__RCC_PLLSOURCE__) | (__PLLMUL__) | (__PLLDIV__))) + +/** @brief Get oscillator clock selected as PLL input clock + * @retval The clock source used for PLL entry. The returned value can be one + * of the following: + * @arg @ref RCC_PLLSOURCE_HSI HSI oscillator clock selected as PLL input clock + * @arg @ref RCC_PLLSOURCE_HSE HSE oscillator clock selected as PLL input clock + */ +#define __HAL_RCC_GET_PLL_OSCSOURCE() ((uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_PLLSRC))) + +/** + * @} + */ + +/** @defgroup RCC_Get_Clock_source Get Clock source + * @{ + */ + +/** + * @brief Macro to configure the system clock source. + * @param __SYSCLKSOURCE__ specifies the system clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_SYSCLKSOURCE_MSI MSI oscillator is used as system clock source. + * @arg @ref RCC_SYSCLKSOURCE_HSI HSI oscillator is used as system clock source. + * @arg @ref RCC_SYSCLKSOURCE_HSE HSE oscillator is used as system clock source. + * @arg @ref RCC_SYSCLKSOURCE_PLLCLK PLL output is used as system clock source. + */ +#define __HAL_RCC_SYSCLK_CONFIG(__SYSCLKSOURCE__) \ + MODIFY_REG(RCC->CFGR, RCC_CFGR_SW, (__SYSCLKSOURCE__)) + +/** @brief Macro to get the clock source used as system clock. + * @retval The clock source used as system clock. The returned value can be one + * of the following: + * @arg @ref RCC_SYSCLKSOURCE_STATUS_MSI MSI used as system clock + * @arg @ref RCC_SYSCLKSOURCE_STATUS_HSI HSI used as system clock + * @arg @ref RCC_SYSCLKSOURCE_STATUS_HSE HSE used as system clock + * @arg @ref RCC_SYSCLKSOURCE_STATUS_PLLCLK PLL used as system clock + */ +#define __HAL_RCC_GET_SYSCLK_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR,RCC_CFGR_SWS))) + +/** + * @} + */ + +/** @defgroup RCCEx_MCOx_Clock_Config RCC Extended MCOx Clock Config + * @{ + */ + +/** @brief Macro to configure the MCO clock. + * @param __MCOCLKSOURCE__ specifies the MCO clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_MCO1SOURCE_NOCLOCK No clock selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_SYSCLK System Clock selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_HSI HSI oscillator clock selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_MSI MSI oscillator clock selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_HSE HSE oscillator clock selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_PLLCLK PLL clock selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_LSI LSI clock selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_LSE LSE clock selected as MCO clock + * @param __MCODIV__ specifies the MCO clock prescaler. + * This parameter can be one of the following values: + * @arg @ref RCC_MCODIV_1 MCO clock source is divided by 1 + * @arg @ref RCC_MCODIV_2 MCO clock source is divided by 2 + * @arg @ref RCC_MCODIV_4 MCO clock source is divided by 4 + * @arg @ref RCC_MCODIV_8 MCO clock source is divided by 8 + * @arg @ref RCC_MCODIV_16 MCO clock source is divided by 16 + */ +#define __HAL_RCC_MCO1_CONFIG(__MCOCLKSOURCE__, __MCODIV__) \ + MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCOSEL | RCC_CFGR_MCOPRE), ((__MCOCLKSOURCE__) | (__MCODIV__))) + +/** + * @} + */ + + /** @defgroup RCC_RTC_Clock_Configuration RCC RTC Clock Configuration + * @{ + */ + +/** @brief Macro to configure the RTC clock (RTCCLK). + * @note As the RTC clock configuration bits are in the Backup domain and write + * access is denied to this domain after reset, you have to enable write + * access using the Power Backup Access macro before to configure + * the RTC clock source (to be done once after reset). + * @note Once the RTC clock is configured it cannot be changed unless the + * Backup domain is reset using @ref __HAL_RCC_BACKUPRESET_FORCE() macro, or by + * a Power On Reset (POR). + * @note RTC prescaler cannot be modified if HSE is enabled (HSEON = 1). + * + * @param __RTC_CLKSOURCE__ specifies the RTC clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_RTCCLKSOURCE_NO_CLK No clock selected as RTC clock + * @arg @ref RCC_RTCCLKSOURCE_LSE LSE selected as RTC clock + * @arg @ref RCC_RTCCLKSOURCE_LSI LSI selected as RTC clock + * @arg @ref RCC_RTCCLKSOURCE_HSE_DIV2 HSE divided by 2 selected as RTC clock + * @arg @ref RCC_RTCCLKSOURCE_HSE_DIV4 HSE divided by 4 selected as RTC clock + * @arg @ref RCC_RTCCLKSOURCE_HSE_DIV8 HSE divided by 8 selected as RTC clock + * @arg @ref RCC_RTCCLKSOURCE_HSE_DIV16 HSE divided by 16 selected as RTC clock + * @note If the LSE or LSI is used as RTC clock source, the RTC continues to + * work in STOP and STANDBY modes, and can be used as wakeup source. + * However, when the HSE clock is used as RTC clock source, the RTC + * cannot be used in STOP and STANDBY modes. + * @note The maximum input clock frequency for RTC is 1MHz (when using HSE as + * RTC clock source). + */ +#define __HAL_RCC_RTC_CLKPRESCALER(__RTC_CLKSOURCE__) do { \ + if(((__RTC_CLKSOURCE__) & RCC_CSR_RTCSEL_HSE) == RCC_CSR_RTCSEL_HSE) \ + { \ + MODIFY_REG(RCC->CR, RCC_CR_RTCPRE, ((__RTC_CLKSOURCE__) & RCC_CR_RTCPRE)); \ + } \ + } while (0) + +#define __HAL_RCC_RTC_CONFIG(__RTC_CLKSOURCE__) do { \ + __HAL_RCC_RTC_CLKPRESCALER(__RTC_CLKSOURCE__); \ + RCC->CSR |= ((__RTC_CLKSOURCE__) & RCC_CSR_RTCSEL); \ + } while (0) + +/** @brief Macro to get the RTC clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_RTCCLKSOURCE_NO_CLK No clock selected as RTC clock + * @arg @ref RCC_RTCCLKSOURCE_LSE LSE selected as RTC clock + * @arg @ref RCC_RTCCLKSOURCE_LSI LSI selected as RTC clock + * @arg @ref RCC_RTCCLKSOURCE_HSE_DIVX HSE divided by X selected as RTC clock (X can be retrieved thanks to @ref __HAL_RCC_GET_RTC_HSE_PRESCALER() + */ +#define __HAL_RCC_GET_RTC_SOURCE() (READ_BIT(RCC->CSR, RCC_CSR_RTCSEL)) + +/** + * @brief Get the RTC and LCD HSE clock divider (RTCCLK / LCDCLK). + * + * @retval Returned value can be one of the following values: + * @arg @ref RCC_RTC_HSE_DIV_2 HSE divided by 2 selected as RTC clock + * @arg @ref RCC_RTC_HSE_DIV_4 HSE divided by 4 selected as RTC clock + * @arg @ref RCC_RTC_HSE_DIV_8 HSE divided by 8 selected as RTC clock + * @arg @ref RCC_RTC_HSE_DIV_16 HSE divided by 16 selected as RTC clock + * + */ +#define __HAL_RCC_GET_RTC_HSE_PRESCALER() ((uint32_t)(READ_BIT(RCC->CR, RCC_CR_RTCPRE))) + +/** @brief Macro to enable the the RTC clock. + * @note These macros must be used only after the RTC clock source was selected. + */ +#define __HAL_RCC_RTC_ENABLE() (*(__IO uint32_t *) RCC_CSR_RTCEN_BB = ENABLE) + +/** @brief Macro to disable the the RTC clock. + * @note These macros must be used only after the RTC clock source was selected. + */ +#define __HAL_RCC_RTC_DISABLE() (*(__IO uint32_t *) RCC_CSR_RTCEN_BB = DISABLE) + +/** @brief Macro to force the Backup domain reset. + * @note This function resets the RTC peripheral (including the backup registers) + * and the RTC clock source selection in RCC_CSR register. + * @note The BKPSRAM is not affected by this reset. + */ +#define __HAL_RCC_BACKUPRESET_FORCE() (*(__IO uint32_t *) RCC_CSR_RTCRST_BB = ENABLE) + +/** @brief Macros to release the Backup domain reset. + */ +#define __HAL_RCC_BACKUPRESET_RELEASE() (*(__IO uint32_t *) RCC_CSR_RTCRST_BB = DISABLE) + +/** + * @} + */ + +/** @defgroup RCC_Flags_Interrupts_Management Flags Interrupts Management + * @brief macros to manage the specified RCC Flags and interrupts. + * @{ + */ + +/** @brief Enable RCC interrupt. + * @param __INTERRUPT__ specifies the RCC interrupt sources to be enabled. + * This parameter can be any combination of the following values: + * @arg @ref RCC_IT_LSIRDY LSI ready interrupt + * @arg @ref RCC_IT_LSERDY LSE ready interrupt + * @arg @ref RCC_IT_HSIRDY HSI ready interrupt + * @arg @ref RCC_IT_HSERDY HSE ready interrupt + * @arg @ref RCC_IT_PLLRDY main PLL ready interrupt + * @arg @ref RCC_IT_MSIRDY MSI ready interrupt + * @arg @ref RCC_IT_LSECSS LSE CSS interrupt (not available for STM32L100xB || STM32L151xB || STM32L152xB devices) + */ +#define __HAL_RCC_ENABLE_IT(__INTERRUPT__) (*(__IO uint8_t *) RCC_CIR_BYTE1_ADDRESS |= (__INTERRUPT__)) + +/** @brief Disable RCC interrupt. + * @param __INTERRUPT__ specifies the RCC interrupt sources to be disabled. + * This parameter can be any combination of the following values: + * @arg @ref RCC_IT_LSIRDY LSI ready interrupt + * @arg @ref RCC_IT_LSERDY LSE ready interrupt + * @arg @ref RCC_IT_HSIRDY HSI ready interrupt + * @arg @ref RCC_IT_HSERDY HSE ready interrupt + * @arg @ref RCC_IT_PLLRDY main PLL ready interrupt + * @arg @ref RCC_IT_MSIRDY MSI ready interrupt + * @arg @ref RCC_IT_LSECSS LSE CSS interrupt (not available for STM32L100xB || STM32L151xB || STM32L152xB devices) + */ +#define __HAL_RCC_DISABLE_IT(__INTERRUPT__) (*(__IO uint8_t *) RCC_CIR_BYTE1_ADDRESS &= (uint8_t)(~(__INTERRUPT__))) + +/** @brief Clear the RCC's interrupt pending bits. + * @param __INTERRUPT__ specifies the interrupt pending bit to clear. + * This parameter can be any combination of the following values: + * @arg @ref RCC_IT_LSIRDY LSI ready interrupt. + * @arg @ref RCC_IT_LSERDY LSE ready interrupt. + * @arg @ref RCC_IT_HSIRDY HSI ready interrupt. + * @arg @ref RCC_IT_HSERDY HSE ready interrupt. + * @arg @ref RCC_IT_PLLRDY Main PLL ready interrupt. + * @arg @ref RCC_IT_MSIRDY MSI ready interrupt + * @arg @ref RCC_IT_LSECSS LSE CSS interrupt (not available for STM32L100xB || STM32L151xB || STM32L152xB devices) + * @arg @ref RCC_IT_CSS Clock Security System interrupt + */ +#define __HAL_RCC_CLEAR_IT(__INTERRUPT__) (*(__IO uint8_t *) RCC_CIR_BYTE2_ADDRESS = (__INTERRUPT__)) + +/** @brief Check the RCC's interrupt has occurred or not. + * @param __INTERRUPT__ specifies the RCC interrupt source to check. + * This parameter can be one of the following values: + * @arg @ref RCC_IT_LSIRDY LSI ready interrupt. + * @arg @ref RCC_IT_LSERDY LSE ready interrupt. + * @arg @ref RCC_IT_HSIRDY HSI ready interrupt. + * @arg @ref RCC_IT_HSERDY HSE ready interrupt. + * @arg @ref RCC_IT_PLLRDY Main PLL ready interrupt. + * @arg @ref RCC_IT_MSIRDY MSI ready interrupt + * @arg @ref RCC_IT_LSECSS LSE CSS interrupt (not available for STM32L100xB || STM32L151xB || STM32L152xB devices) + * @arg @ref RCC_IT_CSS Clock Security System interrupt + * @retval The new state of __INTERRUPT__ (TRUE or FALSE). + */ +#define __HAL_RCC_GET_IT(__INTERRUPT__) ((RCC->CIR & (__INTERRUPT__)) == (__INTERRUPT__)) + +/** @brief Set RMVF bit to clear the reset flags. + * The reset flags are RCC_FLAG_PINRST, RCC_FLAG_PORRST, RCC_FLAG_SFTRST, + * RCC_FLAG_IWDGRST, RCC_FLAG_WWDGRST, RCC_FLAG_LPWRRST + */ +#define __HAL_RCC_CLEAR_RESET_FLAGS() (RCC->CSR |= RCC_CSR_RMVF) + +/** @brief Check RCC flag is set or not. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg @ref RCC_FLAG_HSIRDY HSI oscillator clock ready. + * @arg @ref RCC_FLAG_MSIRDY MSI oscillator clock ready. + * @arg @ref RCC_FLAG_HSERDY HSE oscillator clock ready. + * @arg @ref RCC_FLAG_PLLRDY Main PLL clock ready. + * @arg @ref RCC_FLAG_LSERDY LSE oscillator clock ready. + * @arg @ref RCC_FLAG_LSECSS CSS on LSE failure Detection (*) + * @arg @ref RCC_FLAG_LSIRDY LSI oscillator clock ready. + * @arg @ref RCC_FLAG_OBLRST Option Byte Load reset + * @arg @ref RCC_FLAG_PINRST Pin reset. + * @arg @ref RCC_FLAG_PORRST POR/PDR reset. + * @arg @ref RCC_FLAG_SFTRST Software reset. + * @arg @ref RCC_FLAG_IWDGRST Independent Watchdog reset. + * @arg @ref RCC_FLAG_WWDGRST Window Watchdog reset. + * @arg @ref RCC_FLAG_LPWRRST Low Power reset. + * @note (*) This bit is available in high and medium+ density devices only. + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_RCC_GET_FLAG(__FLAG__) (((((__FLAG__) >> 5) == CR_REG_INDEX)? RCC->CR :RCC->CSR) & ((uint32_t)1 << ((__FLAG__) & RCC_FLAG_MASK))) + +/** + * @} + */ + +/** + * @} + */ + +/* Include RCC HAL Extension module */ +#include "stm32l1xx_hal_rcc_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup RCC_Exported_Functions + * @{ + */ + +/** @addtogroup RCC_Exported_Functions_Group1 + * @{ + */ + +/* Initialization and de-initialization functions ******************************/ +void HAL_RCC_DeInit(void); +HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct); +HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t FLatency); + +/** + * @} + */ + +/** @addtogroup RCC_Exported_Functions_Group2 + * @{ + */ + +/* Peripheral Control functions ************************************************/ +void HAL_RCC_MCOConfig(uint32_t RCC_MCOx, uint32_t RCC_MCOSource, uint32_t RCC_MCODiv); +void HAL_RCC_EnableCSS(void); +void HAL_RCC_DisableCSS(void); +uint32_t HAL_RCC_GetSysClockFreq(void); +uint32_t HAL_RCC_GetHCLKFreq(void); +uint32_t HAL_RCC_GetPCLK1Freq(void); +uint32_t HAL_RCC_GetPCLK2Freq(void); +void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct); +void HAL_RCC_GetClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t *pFLatency); + +/* CSS NMI IRQ handler */ +void HAL_RCC_NMI_IRQHandler(void); + +/* User Callbacks in non blocking mode (IT mode) */ +void HAL_RCC_CSSCallback(void); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32L1xx_HAL_RCC_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_rcc_ex.h b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_rcc_ex.h new file mode 100755 index 0000000..f8762c8 --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_rcc_ex.h @@ -0,0 +1,1050 @@ +/** + ****************************************************************************** + * @file stm32l1xx_hal_rcc_ex.h + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief Header file of RCC HAL Extension module. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L1xx_HAL_RCC_EX_H +#define __STM32L1xx_HAL_RCC_EX_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_hal_def.h" + +/** @addtogroup STM32L1xx_HAL_Driver + * @{ + */ + +/** @addtogroup RCCEx + * @{ + */ + +/** @addtogroup RCCEx_Private_Constants + * @{ + */ + +#define LSI_VALUE ((uint32_t)37000) /* ~37kHz */ + +#if defined(STM32L100xBA) || defined(STM32L151xBA) || defined(STM32L152xBA)\ + || defined(STM32L100xC) || defined(STM32L151xC) || defined(STM32L152xC)\ + || defined(STM32L162xC) || defined(STM32L151xCA) || defined(STM32L151xD)\ + || defined(STM32L152xCA) || defined(STM32L152xD) || defined(STM32L162xCA)\ + || defined(STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX)\ + || defined(STM32L152xE) || defined(STM32L152xDX) || defined(STM32L162xE) || defined(STM32L162xDX) + +/* Alias word address of LSECSSON bit */ +#define LSECSSON_BITNUMBER POSITION_VAL(RCC_CSR_LSECSSON) +#define CSR_LSECSSON_BB ((uint32_t)(PERIPH_BB_BASE + (RCC_CSR_OFFSET_BB * 32) + (LSECSSON_BITNUMBER * 4))) + +#endif /* STM32L100xBA || STM32L151xBA || STM32L152xBA || STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX*/ + +/** + * @} + */ + +/** @addtogroup RCCEx_Private_Macros + * @{ + */ +#if defined(LCD) + +#define IS_RCC_PERIPHCLOCK(__CLK__) ((RCC_PERIPHCLK_RTC <= (__CLK__)) && ((__CLK__) <= RCC_PERIPHCLK_LCD)) + +#else /* Not LCD LINE */ + +#define IS_RCC_PERIPHCLOCK(__CLK__) ((__CLK__) == RCC_PERIPHCLK_RTC) + +#endif /* LCD */ + +/** + * @} + */ + +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup RCCEx_Exported_Types RCCEx Exported Types + * @{ + */ + +/** + * @brief RCC extended clocks structure definition + */ +typedef struct +{ + uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured. + This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */ + + uint32_t RTCClockSelection; /*!< specifies the RTC clock source. + This parameter can be a value of @ref RCC_RTC_LCD_Clock_Source */ + +#if defined(LCD) + + uint32_t LCDClockSelection; /*!< specifies the LCD clock source. + This parameter can be a value of @ref RCC_RTC_LCD_Clock_Source */ + +#endif /* LCD */ +} RCC_PeriphCLKInitTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup RCCEx_Exported_Constants RCCEx Exported Constants + * @{ + */ + +/** @defgroup RCCEx_Periph_Clock_Selection RCCEx Periph Clock Selection + * @{ + */ +#define RCC_PERIPHCLK_RTC ((uint32_t)0x00000001) + +#if defined(LCD) + +#define RCC_PERIPHCLK_LCD ((uint32_t)0x00000002) + +#endif /* LCD */ + +/** + * @} + */ + +#if defined(RCC_LSECSS_SUPPORT) +/** @defgroup RCCEx_EXTI_LINE_LSECSS RCC LSE CSS external interrupt line + * @{ + */ +#define RCC_EXTI_LINE_LSECSS (EXTI_IMR_IM19) /*!< External interrupt line 19 connected to the LSE CSS EXTI Line */ +/** + * @} + */ +#endif /* RCC_LSECSS_SUPPORT */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup RCCEx_Exported_Macros RCCEx Exported Macros + * @{ + */ + +/** @defgroup RCCEx_Peripheral_Clock_Enable_Disable RCCEx_Peripheral_Clock_Enable_Disable + * @brief Enables or disables the AHB1 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#if defined(STM32L151xB) || defined(STM32L152xB) || defined(STM32L151xBA)\ + || defined(STM32L152xBA) || defined(STM32L151xC) || defined(STM32L152xC)\ + || defined(STM32L162xC) || defined(STM32L151xCA) || defined(STM32L151xD)\ + || defined(STM32L152xCA) || defined(STM32L152xD) || defined(STM32L162xCA)\ + || defined(STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined(STM32L152xE) || defined(STM32L152xDX)\ + || defined(STM32L162xE) || defined(STM32L162xDX) + +#define __HAL_RCC_GPIOE_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHBENR, RCC_AHBENR_GPIOEEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_GPIOEEN);\ + UNUSED(tmpreg); \ + } while(0) +#define __HAL_RCC_GPIOE_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIOEEN)) + +#endif /* STM32L151xB || STM32L152xB || ... || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ + +#if defined(STM32L151xCA) || defined(STM32L151xD) || defined(STM32L152xCA)\ + || defined(STM32L152xD) || defined(STM32L162xCA) || defined(STM32L162xD)\ + || defined(STM32L151xE) || defined(STM32L151xDX) || defined(STM32L152xE) || defined(STM32L152xDX) || defined(STM32L162xE) || defined(STM32L162xDX) + +#define __HAL_RCC_GPIOF_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHBENR, RCC_AHBENR_GPIOFEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_GPIOFEN);\ + UNUSED(tmpreg); \ + } while(0) +#define __HAL_RCC_GPIOG_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHBENR, RCC_AHBENR_GPIOGEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_GPIOGEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_GPIOF_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIOFEN)) +#define __HAL_RCC_GPIOG_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIOGEN)) + +#endif /* STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ + +#if defined(STM32L100xC) || defined(STM32L151xC) || defined(STM32L152xC)\ + || defined(STM32L162xC) || defined(STM32L151xCA) || defined(STM32L151xD)\ + || defined(STM32L152xCA) || defined(STM32L152xD) || defined(STM32L162xCA)\ + || defined(STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined(STM32L152xE) || defined(STM32L152xDX)\ + || defined(STM32L162xE) || defined(STM32L162xDX) + +#define __HAL_RCC_DMA2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHBENR, RCC_AHBENR_DMA2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_DMA2EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_DMA2_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_DMA2EN)) + +#endif /* STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ + +#if defined(STM32L162xC) || defined(STM32L162xCA) || defined(STM32L162xD)\ + || defined(STM32L162xE) || defined(STM32L162xDX) + +#define __HAL_RCC_CRYP_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHBENR, RCC_AHBENR_AESEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_AESEN);\ + UNUSED(tmpreg); \ + } while(0) +#define __HAL_RCC_CRYP_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_AESEN)) + +#endif /* STM32L162xC || STM32L162xCA || STM32L162xD || STM32L162xE || STM32L162xDX */ + +#if defined(STM32L151xD) || defined(STM32L152xD) || defined(STM32L162xD) + +#define __HAL_RCC_FSMC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHBENR, RCC_AHBENR_FSMCEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_FSMCEN);\ + UNUSED(tmpreg); \ + } while(0) +#define __HAL_RCC_FSMC_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_FSMCEN)) + +#endif /* STM32L151xD || STM32L152xD || STM32L162xD */ + +#if defined(STM32L100xB) || defined(STM32L100xBA) || defined(STM32L100xC)\ + || defined(STM32L152xB) || defined(STM32L152xBA) || defined(STM32L152xC)\ + || defined(STM32L162xC) || defined(STM32L152xCA) || defined(STM32L152xD)\ + || defined(STM32L162xCA) || defined(STM32L162xD) || defined(STM32L152xE) || defined(STM32L152xDX)\ + || defined(STM32L162xE) || defined(STM32L162xDX) + +#define __HAL_RCC_LCD_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_LCDEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_LCDEN);\ + UNUSED(tmpreg); \ + } while(0) +#define __HAL_RCC_LCD_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_LCDEN)) + +#endif /* STM32L100xB || STM32L152xBA || ... || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ + +/** @brief Enables or disables the Low Speed APB (APB1) peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + */ +#if defined(STM32L151xC) || defined(STM32L152xC) || defined(STM32L162xC)\ + || defined(STM32L151xCA) || defined(STM32L151xD) || defined(STM32L152xCA)\ + || defined(STM32L152xD) || defined(STM32L162xCA) || defined(STM32L162xD)\ + || defined(STM32L151xE) || defined(STM32L151xDX) || defined(STM32L152xE) || defined(STM32L152xDX) || defined(STM32L162xE) || defined(STM32L162xDX) + +#define __HAL_RCC_TIM5_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM5EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM5EN);\ + UNUSED(tmpreg); \ + } while(0) +#define __HAL_RCC_TIM5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM5EN)) + +#endif /* STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ + +#if defined(STM32L100xC) || defined(STM32L151xC) || defined(STM32L152xC)\ + || defined(STM32L162xC) || defined(STM32L151xCA) || defined(STM32L151xD)\ + || defined(STM32L152xCA) || defined(STM32L152xD) || defined(STM32L162xCA)\ + || defined(STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined(STM32L152xE) || defined(STM32L152xDX)\ + || defined(STM32L162xE) || defined(STM32L162xDX) + +#define __HAL_RCC_SPI3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\ + UNUSED(tmpreg); \ + } while(0) +#define __HAL_RCC_SPI3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI3EN)) + +#endif /* STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ + +#if defined(STM32L151xD) || defined(STM32L152xD) || defined(STM32L162xD)\ + || defined(STM32L151xE) || defined(STM32L151xDX) || defined(STM32L152xE) || defined(STM32L152xDX) || defined(STM32L162xE) || defined(STM32L162xDX) + +#define __HAL_RCC_UART4_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\ + UNUSED(tmpreg); \ + } while(0) +#define __HAL_RCC_UART5_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_UART4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART4EN)) +#define __HAL_RCC_UART5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART5EN)) + +#endif /* STM32L151xD || STM32L152xD || STM32L162xD || (...) || STM32L152xDX || STM32L162xE || STM32L162xDX */ + +#if defined(STM32L151xCA) || defined(STM32L151xD) || defined(STM32L152xCA)\ + || defined(STM32L152xD) || defined(STM32L162xCA) || defined(STM32L162xD)\ + || defined(STM32L151xE) || defined(STM32L151xDX) || defined(STM32L152xE)\ + || defined(STM32L152xDX) || defined(STM32L162xE) || defined(STM32L162xDX)\ + || defined(STM32L162xC) || defined(STM32L152xC) || defined(STM32L151xC) + +#define __HAL_RCC_OPAMP_CLK_ENABLE() __HAL_RCC_COMP_CLK_ENABLE() /* Peripherals COMP and OPAMP share the same clock domain */ +#define __HAL_RCC_OPAMP_CLK_DISABLE() __HAL_RCC_COMP_CLK_DISABLE() /* Peripherals COMP and OPAMP share the same clock domain */ + +#endif /* STM32L151xCA || STM32L151xD || STM32L152xCA || (...) || STM32L162xC || STM32L152xC || STM32L151xC */ + +/** @brief Enables or disables the High Speed APB (APB2) peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + */ +#if defined(STM32L151xD) || defined(STM32L152xD) || defined(STM32L162xD) + +#define __HAL_RCC_SDIO_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SDIOEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SDIOEN);\ + UNUSED(tmpreg); \ + } while(0) +#define __HAL_RCC_SDIO_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SDIOEN)) + +#endif /* STM32L151xD || STM32L152xD || STM32L162xD */ + +/** + * @} + */ + + +/** @defgroup RCCEx_Force_Release_Peripheral_Reset RCCEx Force Release Peripheral Reset + * @brief Forces or releases AHB peripheral reset. + * @{ + */ +#if defined(STM32L151xB) || defined(STM32L152xB) || defined(STM32L151xBA)\ + || defined(STM32L152xBA) || defined(STM32L151xC) || defined(STM32L152xC)\ + || defined(STM32L162xC) || defined(STM32L151xCA) || defined(STM32L151xD)\ + || defined(STM32L152xCA) || defined(STM32L152xD) || defined(STM32L162xCA)\ + || defined(STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined(STM32L152xE) || defined(STM32L152xDX)\ + || defined(STM32L162xE) || defined(STM32L162xDX) + +#define __HAL_RCC_GPIOE_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIOERST)) +#define __HAL_RCC_GPIOE_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIOERST)) + +#endif /* STM32L151xB || STM32L152xB || ... || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ + +#if defined(STM32L151xCA) || defined(STM32L151xD) || defined(STM32L152xCA)\ + || defined(STM32L152xD) || defined(STM32L162xCA) || defined(STM32L162xD)\ + || defined(STM32L151xE) || defined(STM32L151xDX) || defined(STM32L152xE) || defined(STM32L152xDX) || defined(STM32L162xE) || defined(STM32L162xDX) + +#define __HAL_RCC_GPIOF_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIOFRST)) +#define __HAL_RCC_GPIOG_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIOGRST)) + +#define __HAL_RCC_GPIOF_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIOFRST)) +#define __HAL_RCC_GPIOG_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIOGRST)) + +#endif /* STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ + +#if defined(STM32L100xC) || defined(STM32L151xC) || defined(STM32L152xC)\ + || defined(STM32L162xC) || defined(STM32L151xCA) || defined(STM32L151xD)\ + || defined(STM32L152xCA) || defined(STM32L152xD) || defined(STM32L162xCA)\ + || defined(STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined(STM32L152xE) || defined(STM32L152xDX)\ + || defined(STM32L162xE) || defined(STM32L162xDX) + +#define __HAL_RCC_DMA2_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_DMA2RST)) +#define __HAL_RCC_DMA2_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_DMA2RST)) + +#endif /* STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ + +#if defined(STM32L162xC) || defined(STM32L162xCA) || defined(STM32L162xD)\ + || defined(STM32L162xE) || defined(STM32L162xDX) + +#define __HAL_RCC_CRYP_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_AESRST)) +#define __HAL_RCC_CRYP_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_AESRST)) + +#endif /* STM32L162xC || STM32L162xCA || STM32L162xD || STM32L162xE || STM32L162xDX */ + +#if defined(STM32L151xD) || defined(STM32L152xD) || defined(STM32L162xD) + +#define __HAL_RCC_FSMC_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_FSMCRST)) +#define __HAL_RCC_FSMC_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_FSMCRST)) + +#endif /* STM32L151xD || STM32L152xD || STM32L162xD */ + +#if defined(STM32L100xB) || defined(STM32L100xBA) || defined(STM32L100xC)\ + || defined(STM32L152xB) || defined(STM32L152xBA) || defined(STM32L152xC)\ + || defined(STM32L162xC) || defined(STM32L152xCA) || defined(STM32L152xD)\ + || defined(STM32L162xCA) || defined(STM32L162xD) || defined(STM32L152xE) || defined(STM32L152xDX)\ + || defined(STM32L162xE) || defined(STM32L162xDX) + +#define __HAL_RCC_LCD_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_LCDRST)) +#define __HAL_RCC_LCD_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_LCDRST)) + +#endif /* STM32L100xB || STM32L152xBA || ... || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ + +/** @brief Forces or releases APB1 peripheral reset. + */ +#if defined(STM32L151xC) || defined(STM32L152xC) || defined(STM32L162xC)\ + || defined(STM32L151xCA) || defined(STM32L151xD) || defined(STM32L152xCA)\ + || defined(STM32L152xD) || defined(STM32L162xCA) || defined(STM32L162xD)\ + || defined(STM32L151xE) || defined(STM32L151xDX) || defined(STM32L152xE) || defined(STM32L152xDX) || defined(STM32L162xE) || defined(STM32L162xDX) + +#define __HAL_RCC_TIM5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM5RST)) +#define __HAL_RCC_TIM5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM5RST)) + +#endif /* STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ + +#if defined(STM32L100xC) || defined(STM32L151xC) || defined(STM32L152xC)\ + || defined(STM32L162xC) || defined(STM32L151xCA) || defined(STM32L151xD)\ + || defined(STM32L152xCA) || defined(STM32L152xD) || defined(STM32L162xCA)\ + || defined(STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined(STM32L152xE) || defined(STM32L152xDX)\ + || defined(STM32L162xE) || defined(STM32L162xDX) + +#define __HAL_RCC_SPI3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI3RST)) +#define __HAL_RCC_SPI3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI3RST)) + +#endif /* STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ + +#if defined(STM32L151xD) || defined(STM32L152xD) || defined(STM32L162xD)\ + || defined(STM32L151xE) || defined(STM32L151xDX) || defined(STM32L152xE) || defined(STM32L152xDX) || defined(STM32L162xE) || defined(STM32L162xDX) + +#define __HAL_RCC_UART4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART4RST)) +#define __HAL_RCC_UART5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART5RST)) + +#define __HAL_RCC_UART4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART4RST)) +#define __HAL_RCC_UART5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART5RST)) + +#endif /* STM32L151xD || STM32L152xD || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ + +#if defined(STM32L151xCA) || defined(STM32L151xD) || defined(STM32L152xCA)\ + || defined(STM32L152xD) || defined(STM32L162xCA) || defined(STM32L162xD)\ + || defined(STM32L151xE) || defined(STM32L151xDX) || defined(STM32L152xE) || defined(STM32L152xDX) || defined(STM32L162xE) || defined(STM32L162xDX)\ + || defined(STM32L162xC) || defined(STM32L152xC) || defined(STM32L151xC) + +#define __HAL_RCC_OPAMP_FORCE_RESET() __HAL_RCC_COMP_FORCE_RESET() /* Peripherals COMP and OPAMP share the same clock domain */ +#define __HAL_RCC_OPAMP_RELEASE_RESET() __HAL_RCC_COMP_RELEASE_RESET() /* Peripherals COMP and OPAMP share the same clock domain */ + +#endif /* STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xC || STM32L152xC || STM32L151xC */ + +/** @brief Forces or releases APB2 peripheral reset. + */ +#if defined(STM32L151xD) || defined(STM32L152xD) || defined(STM32L162xD) + +#define __HAL_RCC_SDIO_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SDIORST)) +#define __HAL_RCC_SDIO_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SDIORST)) + +#endif /* STM32L151xD || STM32L152xD || STM32L162xD */ + +/** + * @} + */ + +/** @defgroup RCCEx_Peripheral_Clock_Sleep_Enable_Disable RCCEx Peripheral Clock Sleep Enable Disable + * @brief Enables or disables the AHB1 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ +#if defined(STM32L151xB) || defined(STM32L152xB) || defined(STM32L151xBA)\ + || defined(STM32L152xBA) || defined(STM32L151xC) || defined(STM32L152xC)\ + || defined(STM32L162xC) || defined(STM32L151xCA) || defined(STM32L151xD)\ + || defined(STM32L152xCA) || defined(STM32L152xD) || defined(STM32L162xCA)\ + || defined(STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined(STM32L152xE) || defined(STM32L152xDX)\ + || defined(STM32L162xE) || defined(STM32L162xDX) + +#define __HAL_RCC_GPIOE_CLK_SLEEP_ENABLE() (RCC->AHBLPENR |= (RCC_AHBLPENR_GPIOELPEN)) +#define __HAL_RCC_GPIOE_CLK_SLEEP_DISABLE() (RCC->AHBLPENR &= ~(RCC_AHBLPENR_GPIOELPEN)) + +#endif /* STM32L151xB || STM32L152xB || ... || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ + +#if defined(STM32L151xCA) || defined(STM32L151xD) || defined(STM32L152xCA)\ + || defined(STM32L152xD) || defined(STM32L162xCA) || defined(STM32L162xD)\ + || defined(STM32L151xE) || defined(STM32L151xDX) || defined(STM32L152xE) || defined(STM32L152xDX) || defined(STM32L162xE) || defined(STM32L162xDX) + +#define __HAL_RCC_GPIOF_CLK_SLEEP_ENABLE() (RCC->AHBLPENR |= (RCC_AHBLPENR_GPIOFLPEN)) +#define __HAL_RCC_GPIOG_CLK_SLEEP_ENABLE() (RCC->AHBLPENR |= (RCC_AHBLPENR_GPIOGLPEN)) + +#define __HAL_RCC_GPIOF_CLK_SLEEP_DISABLE() (RCC->AHBLPENR &= ~(RCC_AHBLPENR_GPIOFLPEN)) +#define __HAL_RCC_GPIOG_CLK_SLEEP_DISABLE() (RCC->AHBLPENR &= ~(RCC_AHBLPENR_GPIOGLPEN)) + +#endif /* STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ + +#if defined(STM32L100xC) || defined(STM32L151xC) || defined(STM32L152xC)\ + || defined(STM32L162xC) || defined(STM32L151xCA) || defined(STM32L151xD)\ + || defined(STM32L152xCA) || defined(STM32L152xD) || defined(STM32L162xCA)\ + || defined(STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined(STM32L152xE) || defined(STM32L152xDX)\ + || defined(STM32L162xE) || defined(STM32L162xDX) + +#define __HAL_RCC_DMA2_CLK_SLEEP_ENABLE() (RCC->AHBLPENR |= (RCC_AHBLPENR_DMA2LPEN)) +#define __HAL_RCC_DMA2_CLK_SLEEP_DISABLE() (RCC->AHBLPENR &= ~(RCC_AHBLPENR_DMA2LPEN)) + +#endif /* STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ + +#if defined(STM32L162xC) || defined(STM32L162xCA) || defined(STM32L162xD) || defined(STM32L162xE) || defined(STM32L162xDX) + +#define __HAL_RCC_CRYP_CLK_SLEEP_ENABLE() (RCC->AHBLPENR |= (RCC_AHBLPENR_AESLPEN)) +#define __HAL_RCC_CRYP_CLK_SLEEP_DISABLE() (RCC->AHBLPENR &= ~(RCC_AHBLPENR_AESLPEN)) + +#endif /* STM32L162xC || STM32L162xCA || STM32L162xD || STM32L162xE || STM32L162xDX */ + +#if defined(STM32L151xD) || defined(STM32L152xD) || defined(STM32L162xD) + +#define __HAL_RCC_FSMC_CLK_SLEEP_ENABLE() (RCC->AHBLPENR |= (RCC_AHBLPENR_FSMCLPEN)) +#define __HAL_RCC_FSMC_CLK_SLEEP_DISABLE() (RCC->AHBLPENR &= ~(RCC_AHBLPENR_FSMCLPEN)) + +#endif /* STM32L151xD || STM32L152xD || STM32L162xD */ + +#if defined(STM32L100xB) || defined(STM32L100xBA) || defined(STM32L100xC)\ + || defined(STM32L152xB) || defined(STM32L152xBA) || defined(STM32L152xC)\ + || defined(STM32L162xC) || defined(STM32L152xCA) || defined(STM32L152xD)\ + || defined(STM32L162xCA) || defined(STM32L162xD) || defined(STM32L152xE) || defined(STM32L152xDX)\ + || defined(STM32L162xE) || defined(STM32L162xDX) + +#define __HAL_RCC_LCD_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_LCDLPEN)) +#define __HAL_RCC_LCD_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_LCDLPEN)) + +#endif /* STM32L100xB || STM32L152xBA || ... || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ + +/** @brief Enables or disables the APB1 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + */ +#if defined(STM32L151xC) || defined(STM32L152xC) || defined(STM32L162xC)\ + || defined(STM32L151xCA) || defined(STM32L151xD) || defined(STM32L152xCA)\ + || defined(STM32L152xD) || defined(STM32L162xCA) || defined(STM32L162xD)\ + || defined(STM32L151xE) || defined(STM32L151xDX) || defined(STM32L152xE) || defined(STM32L152xDX) || defined(STM32L162xE) || defined(STM32L162xDX) + +#define __HAL_RCC_TIM5_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM5LPEN)) +#define __HAL_RCC_TIM5_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM5LPEN)) + +#endif /* STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ + +#if defined(STM32L100xC) || defined(STM32L151xC) || defined(STM32L152xC)\ + || defined(STM32L162xC) || defined(STM32L151xCA) || defined(STM32L151xD)\ + || defined(STM32L152xCA) || defined(STM32L152xD) || defined(STM32L162xCA)\ + || defined(STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined(STM32L152xE) || defined(STM32L152xDX)\ + || defined(STM32L162xE) || defined(STM32L162xDX) + +#define __HAL_RCC_SPI3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_SPI3LPEN)) +#define __HAL_RCC_SPI3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_SPI3LPEN)) + +#endif /* STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ + +#if defined(STM32L151xD) || defined(STM32L152xD) || defined(STM32L162xD)\ + || defined(STM32L151xE) || defined(STM32L151xDX) || defined(STM32L152xE) || defined(STM32L152xDX) || defined(STM32L162xE) || defined(STM32L162xDX) + +#define __HAL_RCC_UART4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART4LPEN)) +#define __HAL_RCC_UART5_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART5LPEN)) + +#define __HAL_RCC_UART4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART4LPEN)) +#define __HAL_RCC_UART5_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART5LPEN)) + +#endif /* STM32L151xD || STM32L152xD || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ + +#if defined(STM32L151xCA) || defined(STM32L151xD) || defined(STM32L152xCA)\ + || defined(STM32L152xD) || defined(STM32L162xCA) || defined(STM32L162xD)\ + || defined(STM32L151xE) || defined(STM32L151xDX) || defined(STM32L152xE) || defined(STM32L152xDX) || defined(STM32L162xE) || defined(STM32L162xDX)\ + || defined(STM32L162xC) || defined(STM32L152xC) || defined(STM32L151xC) + +#define __HAL_RCC_OPAMP_CLK_SLEEP_ENABLE() __HAL_RCC_COMP_CLK_SLEEP_ENABLE() /* Peripherals COMP and OPAMP share the same clock domain */ +#define __HAL_RCC_OPAMP_CLK_SLEEP_DISABLE() __HAL_RCC_COMP_CLK_SLEEP_DISABLE() /* Peripherals COMP and OPAMP share the same clock domain */ + +#endif /* STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xC || STM32L152xC || STM32L151xC */ + +/** @brief Enables or disables the APB2 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + */ +#if defined(STM32L151xD) || defined(STM32L152xD) || defined(STM32L162xD) + +#define __HAL_RCC_SDIO_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SDIOLPEN)) +#define __HAL_RCC_SDIO_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SDIOLPEN)) + +#endif /* STM32L151xD || STM32L152xD || STM32L162xD */ + +/** + * @} + */ + +/** @defgroup RCCEx_Peripheral_Clock_Enable_Disable_Status Peripheral Clock Enable Disable Status + * @brief Get the enable or disable status of peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#if defined(STM32L151xB) || defined(STM32L152xB) || defined(STM32L151xBA)\ + || defined(STM32L152xBA) || defined(STM32L151xC) || defined(STM32L152xC)\ + || defined(STM32L162xC) || defined(STM32L151xCA) || defined(STM32L151xD)\ + || defined(STM32L152xCA) || defined(STM32L152xD) || defined(STM32L162xCA)\ + || defined(STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined(STM32L152xE) || defined(STM32L152xDX)\ + || defined(STM32L162xE) || defined(STM32L162xDX) + +#define __HAL_RCC_GPIOE_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIOEEN)) != RESET) +#define __HAL_RCC_GPIOE_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIOEEN)) == RESET) + +#endif /* STM32L151xB || STM32L152xB || ... || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ + +#if defined(STM32L151xCA) || defined(STM32L151xD) || defined(STM32L152xCA)\ + || defined(STM32L152xD) || defined(STM32L162xCA) || defined(STM32L162xD)\ + || defined(STM32L151xE) || defined(STM32L151xDX) || defined(STM32L152xE) || defined(STM32L152xDX) || defined(STM32L162xE) || defined(STM32L162xDX) + +#define __HAL_RCC_GPIOF_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIOFEN)) != RESET) +#define __HAL_RCC_GPIOG_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIOGEN)) != RESET) +#define __HAL_RCC_GPIOF_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIOFEN)) == RESET) +#define __HAL_RCC_GPIOG_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIOGEN)) == RESET) + +#endif /* STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ + +#if defined(STM32L100xC) || defined(STM32L151xC) || defined(STM32L152xC)\ + || defined(STM32L162xC) || defined(STM32L151xCA) || defined(STM32L151xD)\ + || defined(STM32L152xCA) || defined(STM32L152xD) || defined(STM32L162xCA)\ + || defined(STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined(STM32L152xE) || defined(STM32L152xDX)\ + || defined(STM32L162xE) || defined(STM32L162xDX) + +#define __HAL_RCC_DMA2_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_DMA2EN)) != RESET) +#define __HAL_RCC_DMA2_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_DMA2EN)) == RESET) + +#endif /* STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ + +#if defined(STM32L162xC) || defined(STM32L162xCA) || defined(STM32L162xD)\ + || defined(STM32L162xE) || defined(STM32L162xDX) + +#define __HAL_RCC_CRYP_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_AESEN)) != RESET) +#define __HAL_RCC_CRYP_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_AESEN)) == RESET) + +#endif /* STM32L162xC || STM32L162xCA || STM32L162xD || STM32L162xE || STM32L162xDX */ + +#if defined(STM32L151xD) || defined(STM32L152xD) || defined(STM32L162xD) + +#define __HAL_RCC_FSMC_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_FSMCEN)) != RESET) +#define __HAL_RCC_FSMC_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_FSMCEN)) == RESET) + +#endif /* STM32L151xD || STM32L152xD || STM32L162xD */ + +#if defined(STM32L100xB) || defined(STM32L100xBA) || defined(STM32L100xC)\ + || defined(STM32L152xB) || defined(STM32L152xBA) || defined(STM32L152xC)\ + || defined(STM32L162xC) || defined(STM32L152xCA) || defined(STM32L152xD)\ + || defined(STM32L162xCA) || defined(STM32L162xD) || defined(STM32L152xE) || defined(STM32L152xDX)\ + || defined(STM32L162xE) || defined(STM32L162xDX) + +#define __HAL_RCC_LCD_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_LCDEN)) != RESET) +#define __HAL_RCC_LCD_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_LCDEN)) == RESET) + +#endif /* STM32L100xB || STM32L152xBA || ... || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ + +#if defined(STM32L151xC) || defined(STM32L152xC) || defined(STM32L162xC)\ + || defined(STM32L151xCA) || defined(STM32L151xD) || defined(STM32L152xCA)\ + || defined(STM32L152xD) || defined(STM32L162xCA) || defined(STM32L162xD)\ + || defined(STM32L151xE) || defined(STM32L151xDX) || defined(STM32L152xE) || defined(STM32L152xDX) || defined(STM32L162xE) || defined(STM32L162xDX) + +#define __HAL_RCC_TIM5_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM5EN)) != RESET) +#define __HAL_RCC_TIM5_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM5EN)) == RESET) + +#endif /* STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ + +#if defined(STM32L100xC) || defined(STM32L151xC) || defined(STM32L152xC)\ + || defined(STM32L162xC) || defined(STM32L151xCA) || defined(STM32L151xD)\ + || defined(STM32L152xCA) || defined(STM32L152xD) || defined(STM32L162xCA)\ + || defined(STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined(STM32L152xE) || defined(STM32L152xDX)\ + || defined(STM32L162xE) || defined(STM32L162xDX) + +#define __HAL_RCC_SPI3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) != RESET) +#define __HAL_RCC_SPI3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) == RESET) + +#endif /* STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ + +#if defined(STM32L151xD) || defined(STM32L152xD) || defined(STM32L162xD)\ + || defined(STM32L151xE) || defined(STM32L151xDX) || defined(STM32L152xE) || defined(STM32L152xDX) || defined(STM32L162xE) || defined(STM32L162xDX) + +#define __HAL_RCC_UART4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART4EN)) != RESET) +#define __HAL_RCC_UART5_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART5EN)) != RESET) +#define __HAL_RCC_UART4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART4EN)) == RESET) +#define __HAL_RCC_UART5_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART5EN)) == RESET) + +#endif /* STM32L151xD || STM32L152xD || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ + +#if defined(STM32L151xCA) || defined(STM32L151xD) || defined(STM32L152xCA)\ + || defined(STM32L152xD) || defined(STM32L162xCA) || defined(STM32L162xD)\ + || defined(STM32L151xE) || defined(STM32L151xDX) || defined(STM32L152xE) || defined(STM32L152xDX) || defined(STM32L162xE) || defined(STM32L162xDX)\ + || defined(STM32L162xC) || defined(STM32L152xC) || defined(STM32L151xC) + +#define __HAL_RCC_OPAMP_IS_CLK_ENABLED() __HAL_RCC_COMP_IS_CLK_ENABLED() +#define __HAL_RCC_OPAMP_IS_CLK_DISABLED() __HAL_RCC_COMP_IS_CLK_DISABLED() + +#endif /* STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xC || STM32L152xC || STM32L151xC */ + +#if defined(STM32L151xD) || defined(STM32L152xD) || defined(STM32L162xD) + +#define __HAL_RCC_SDIO_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDIOEN)) != RESET) +#define __HAL_RCC_SDIO_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDIOEN)) == RESET) + +#endif /* STM32L151xD || STM32L152xD || STM32L162xD */ + +/** + * @} + */ + +/** @defgroup RCCEx_Peripheral_Clock_Sleep_Enable_Disable_Status Peripheral Clock Sleep Enable Disable Status + * @brief Get the enable or disable status of peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ + +#if defined(STM32L151xB) || defined(STM32L152xB) || defined(STM32L151xBA)\ + || defined(STM32L152xBA) || defined(STM32L151xC) || defined(STM32L152xC)\ + || defined(STM32L162xC) || defined(STM32L151xCA) || defined(STM32L151xD)\ + || defined(STM32L152xCA) || defined(STM32L152xD) || defined(STM32L162xCA)\ + || defined(STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined(STM32L152xE) || defined(STM32L152xDX)\ + || defined(STM32L162xE) || defined(STM32L162xDX) + +#define __HAL_RCC_GPIOE_IS_CLK_SLEEP_ENABLED() ((RCC->AHBLPENR & (RCC_AHBLPENR_GPIOELPEN)) != RESET) +#define __HAL_RCC_GPIOE_IS_CLK_SLEEP_DISABLED() ((RCC->AHBLPENR & (RCC_AHBLPENR_GPIOELPEN)) == RESET) + +#endif /* STM32L151xB || STM32L152xB || ... || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ + +#if defined(STM32L151xCA) || defined(STM32L151xD) || defined(STM32L152xCA)\ + || defined(STM32L152xD) || defined(STM32L162xCA) || defined(STM32L162xD)\ + || defined(STM32L151xE) || defined(STM32L151xDX) || defined(STM32L152xE) || defined(STM32L152xDX) || defined(STM32L162xE) || defined(STM32L162xDX) + +#define __HAL_RCC_GPIOF_IS_CLK_SLEEP_ENABLED() ((RCC->AHBLPENR & (RCC_AHBLPENR_GPIOFLPEN)) != RESET) +#define __HAL_RCC_GPIOG_IS_CLK_SLEEP_ENABLED() ((RCC->AHBLPENR & (RCC_AHBLPENR_GPIOGLPEN)) != RESET) +#define __HAL_RCC_GPIOF_IS_CLK_SLEEP_DISABLED() ((RCC->AHBLPENR & (RCC_AHBLPENR_GPIOFLPEN)) == RESET) +#define __HAL_RCC_GPIOG_IS_CLK_SLEEP_DISABLED() ((RCC->AHBLPENR & (RCC_AHBLPENR_GPIOGLPEN)) == RESET) + +#endif /* STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ + +#if defined(STM32L100xC) || defined(STM32L151xC) || defined(STM32L152xC)\ + || defined(STM32L162xC) || defined(STM32L151xCA) || defined(STM32L151xD)\ + || defined(STM32L152xCA) || defined(STM32L152xD) || defined(STM32L162xCA)\ + || defined(STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined(STM32L152xE) || defined(STM32L152xDX)\ + || defined(STM32L162xE) || defined(STM32L162xDX) + +#define __HAL_RCC_DMA2_IS_CLK_SLEEP_ENABLED() ((RCC->AHBLPENR & (RCC_AHBLPENR_DMA2LPEN)) != RESET) +#define __HAL_RCC_DMA2_IS_CLK_SLEEP_DISABLED() ((RCC->AHBLPENR & (RCC_AHBLPENR_DMA2LPEN)) == RESET) + +#endif /* STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ + +#if defined(STM32L162xC) || defined(STM32L162xCA) || defined(STM32L162xD)\ + || defined(STM32L162xE) || defined(STM32L162xDX) + +#define __HAL_RCC_CRYP_IS_CLK_SLEEP_ENABLED() ((RCC->AHBLPENR & (RCC_AHBLPENR_AESLPEN)) != RESET) +#define __HAL_RCC_CRYP_IS_CLK_SLEEP_DISABLED() ((RCC->AHBLPENR & (RCC_AHBLPENR_AESLPEN)) == RESET) + +#endif /* STM32L162xC || STM32L162xCA || STM32L162xD || STM32L162xE || STM32L162xDX */ + +#if defined(STM32L151xD) || defined(STM32L152xD) || defined(STM32L162xD) + +#define __HAL_RCC_FSMC_IS_CLK_SLEEP_ENABLED() ((RCC->AHBLPENR & (RCC_AHBLPENR_FSMCLPEN)) != RESET) +#define __HAL_RCC_FSMC_IS_CLK_SLEEP_DISABLED() ((RCC->AHBLPENR & (RCC_AHBLPENR_FSMCLPEN)) == RESET) + +#endif /* STM32L151xD || STM32L152xD || STM32L162xD */ + +#if defined(STM32L100xB) || defined(STM32L100xBA) || defined(STM32L100xC)\ + || defined(STM32L152xB) || defined(STM32L152xBA) || defined(STM32L152xC)\ + || defined(STM32L162xC) || defined(STM32L152xCA) || defined(STM32L152xD)\ + || defined(STM32L162xCA) || defined(STM32L162xD) || defined(STM32L152xE) || defined(STM32L152xDX)\ + || defined(STM32L162xE) || defined(STM32L162xDX) + +#define __HAL_RCC_LCD_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_LCDLPEN)) != RESET) +#define __HAL_RCC_LCD_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_LCDLPEN)) == RESET) + +#endif /* STM32L100xB || STM32L152xBA || ... || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ + +#if defined(STM32L151xC) || defined(STM32L152xC) || defined(STM32L162xC)\ + || defined(STM32L151xCA) || defined(STM32L151xD) || defined(STM32L152xCA)\ + || defined(STM32L152xD) || defined(STM32L162xCA) || defined(STM32L162xD)\ + || defined(STM32L151xE) || defined(STM32L151xDX) || defined(STM32L152xE) || defined(STM32L152xDX) || defined(STM32L162xE) || defined(STM32L162xDX) + +#define __HAL_RCC_TIM5_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM5LPEN)) != RESET) +#define __HAL_RCC_TIM5_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM5LPEN)) == RESET) + +#endif /* STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ + +#if defined(STM32L100xC) || defined(STM32L151xC) || defined(STM32L152xC)\ + || defined(STM32L162xC) || defined(STM32L151xCA) || defined(STM32L151xD)\ + || defined(STM32L152xCA) || defined(STM32L152xD) || defined(STM32L162xCA)\ + || defined(STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined(STM32L152xE) || defined(STM32L152xDX)\ + || defined(STM32L162xE) || defined(STM32L162xDX) + +#define __HAL_RCC_SPI3_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_SPI3LPEN)) != RESET) +#define __HAL_RCC_SPI3_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_SPI3LPEN)) == RESET) + +#endif /* STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ + +#if defined(STM32L151xD) || defined(STM32L152xD) || defined(STM32L162xD)\ + || defined(STM32L151xE) || defined(STM32L151xDX) || defined(STM32L152xE) || defined(STM32L152xDX) || defined(STM32L162xE) || defined(STM32L162xDX) + +#define __HAL_RCC_UART4_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_UART4LPEN)) != RESET) +#define __HAL_RCC_UART5_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_UART5LPEN)) != RESET) +#define __HAL_RCC_UART4_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_UART4LPEN)) == RESET) +#define __HAL_RCC_UART5_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_UART5LPEN)) == RESET) + +#endif /* STM32L151xD || STM32L152xD || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ + +#if defined(STM32L151xCA) || defined(STM32L151xD) || defined(STM32L152xCA)\ + || defined(STM32L152xD) || defined(STM32L162xCA) || defined(STM32L162xD)\ + || defined(STM32L151xE) || defined(STM32L151xDX) || defined(STM32L152xE) || defined(STM32L152xDX) || defined(STM32L162xE) || defined(STM32L162xDX)\ + || defined(STM32L162xC) || defined(STM32L152xC) || defined(STM32L151xC) + +#define __HAL_RCC_OPAMP_IS_CLK_SLEEP_ENABLED() __HAL_RCC_COMP_IS_CLK_SLEEP_ENABLED() +#define __HAL_RCC_OPAMP_IS_CLK_SLEEP_DISABLED() __HAL_RCC_COMP_IS_CLK_SLEEP_DISABLED() + +#endif /* STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xC || STM32L152xC || STM32L151xC */ + +#if defined(STM32L151xD) || defined(STM32L152xD) || defined(STM32L162xD) + +#define __HAL_RCC_SDIO_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SDIOLPEN)) != RESET) +#define __HAL_RCC_SDIO_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SDIOLPEN)) == RESET) + +#endif /* STM32L151xD || STM32L152xD || STM32L162xD */ + +/** + * @} + */ + + +#if defined(RCC_LSECSS_SUPPORT) + +/** + * @brief Enable interrupt on RCC LSE CSS EXTI Line 19. + * @retval None + */ +#define __HAL_RCC_LSECSS_EXTI_ENABLE_IT() SET_BIT(EXTI->IMR, RCC_EXTI_LINE_LSECSS) + +/** + * @brief Disable interrupt on RCC LSE CSS EXTI Line 19. + * @retval None + */ +#define __HAL_RCC_LSECSS_EXTI_DISABLE_IT() CLEAR_BIT(EXTI->IMR, RCC_EXTI_LINE_LSECSS) + +/** + * @brief Enable event on RCC LSE CSS EXTI Line 19. + * @retval None. + */ +#define __HAL_RCC_LSECSS_EXTI_ENABLE_EVENT() SET_BIT(EXTI->EMR, RCC_EXTI_LINE_LSECSS) + +/** + * @brief Disable event on RCC LSE CSS EXTI Line 19. + * @retval None. + */ +#define __HAL_RCC_LSECSS_EXTI_DISABLE_EVENT() CLEAR_BIT(EXTI->EMR, RCC_EXTI_LINE_LSECSS) + + +/** + * @brief RCC LSE CSS EXTI line configuration: set falling edge trigger. + * @retval None. + */ +#define __HAL_RCC_LSECSS_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR, RCC_EXTI_LINE_LSECSS) + + +/** + * @brief Disable the RCC LSE CSS Extended Interrupt Falling Trigger. + * @retval None. + */ +#define __HAL_RCC_LSECSS_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR, RCC_EXTI_LINE_LSECSS) + + +/** + * @brief RCC LSE CSS EXTI line configuration: set rising edge trigger. + * @retval None. + */ +#define __HAL_RCC_LSECSS_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR, RCC_EXTI_LINE_LSECSS) + +/** + * @brief Disable the RCC LSE CSS Extended Interrupt Rising Trigger. + * @retval None. + */ +#define __HAL_RCC_LSECSS_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR, RCC_EXTI_LINE_LSECSS) + +/** + * @brief RCC LSE CSS EXTI line configuration: set rising & falling edge trigger. + * @retval None. + */ +#define __HAL_RCC_LSECSS_EXTI_ENABLE_RISING_FALLING_EDGE() \ + do { \ + __HAL_RCC_LSECSS_EXTI_ENABLE_RISING_EDGE(); \ + __HAL_RCC_LSECSS_EXTI_ENABLE_FALLING_EDGE(); \ + } while(0) + +/** + * @brief Disable the RCC LSE CSS Extended Interrupt Rising & Falling Trigger. + * @retval None. + */ +#define __HAL_RCC_LSECSS_EXTI_DISABLE_RISING_FALLING_EDGE() \ + do { \ + __HAL_RCC_LSECSS_EXTI_DISABLE_RISING_EDGE(); \ + __HAL_RCC_LSECSS_EXTI_DISABLE_FALLING_EDGE(); \ + } while(0) + +/** + * @brief Check whether the specified RCC LSE CSS EXTI interrupt flag is set or not. + * @retval EXTI RCC LSE CSS Line Status. + */ +#define __HAL_RCC_LSECSS_EXTI_GET_FLAG() (EXTI->PR & (RCC_EXTI_LINE_LSECSS)) + +/** + * @brief Clear the RCC LSE CSS EXTI flag. + * @retval None. + */ +#define __HAL_RCC_LSECSS_EXTI_CLEAR_FLAG() (EXTI->PR = (RCC_EXTI_LINE_LSECSS)) + +/** + * @brief Generate a Software interrupt on selected EXTI line. + * @retval None. + */ +#define __HAL_RCC_LSECSS_EXTI_GENERATE_SWIT() SET_BIT(EXTI->SWIER, RCC_EXTI_LINE_LSECSS) + +#endif /* RCC_LSECSS_SUPPORT */ + +#if defined(LCD) + +/** @defgroup RCCEx_LCD_Configuration LCD Configuration + * @brief Macros to configure clock source of LCD peripherals. + * @{ + */ + +/** @brief Macro to configures LCD clock (LCDCLK). + * @note LCD and RTC use the same configuration + * @note LCD can however be used in the Stop low power mode if the LSE or LSI is used as the + * LCD clock source. + * + * @param __LCD_CLKSOURCE__ specifies the LCD clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_RTCCLKSOURCE_LSE LSE selected as LCD clock + * @arg @ref RCC_RTCCLKSOURCE_LSI LSI selected as LCD clock + * @arg @ref RCC_RTCCLKSOURCE_HSE_DIV2 HSE divided by 2 selected as LCD clock + * @arg @ref RCC_RTCCLKSOURCE_HSE_DIV4 HSE divided by 4 selected as LCD clock + * @arg @ref RCC_RTCCLKSOURCE_HSE_DIV8 HSE divided by 8 selected as LCD clock + * @arg @ref RCC_RTCCLKSOURCE_HSE_DIV16 HSE divided by 16 selected as LCD clock + */ +#define __HAL_RCC_LCD_CONFIG(__LCD_CLKSOURCE__) __HAL_RCC_RTC_CONFIG(__LCD_CLKSOURCE__) + +/** @brief Macro to get the LCD clock source. + */ +#define __HAL_RCC_GET_LCD_SOURCE() __HAL_RCC_GET_RTC_SOURCE() + +/** @brief Macro to get the LCD clock pre-scaler. + */ +#define __HAL_RCC_GET_LCD_HSE_PRESCALER() __HAL_RCC_GET_RTC_HSE_PRESCALER() + +/** + * @} + */ + +#endif /* LCD */ + + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup RCCEx_Exported_Functions + * @{ + */ + +/** @addtogroup RCCEx_Exported_Functions_Group1 + * @{ + */ + +HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit); +void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit); +uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk); + +#if defined(RCC_LSECSS_SUPPORT) + +void HAL_RCCEx_EnableLSECSS(void); +void HAL_RCCEx_DisableLSECSS(void); +void HAL_RCCEx_EnableLSECSS_IT(void); +void HAL_RCCEx_LSECSS_IRQHandler(void); +void HAL_RCCEx_LSECSS_Callback(void); + +#endif /* RCC_LSECSS_SUPPORT */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32L1xx_HAL_RCC_EX_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_rtc.h b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_rtc.h new file mode 100755 index 0000000..9eacd27 --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_rtc.h @@ -0,0 +1,703 @@ +/** + ****************************************************************************** + * @file stm32l1xx_hal_rtc.h + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief Header file of RTC HAL module. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L1xx_HAL_RTC_H +#define __STM32L1xx_HAL_RTC_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_hal_def.h" + +/** @addtogroup STM32L1xx_HAL_Driver + * @{ + */ + +/** @addtogroup RTC + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup RTC_Exported_Types RTC Exported Types + * @{ + */ + +/** + * @brief HAL State structures definition + */ +typedef enum +{ + HAL_RTC_STATE_RESET = 0x00, /*!< RTC not yet initialized or disabled */ + HAL_RTC_STATE_READY = 0x01, /*!< RTC initialized and ready for use */ + HAL_RTC_STATE_BUSY = 0x02, /*!< RTC process is ongoing */ + HAL_RTC_STATE_TIMEOUT = 0x03, /*!< RTC timeout state */ + HAL_RTC_STATE_ERROR = 0x04 /*!< RTC error state */ + +}HAL_RTCStateTypeDef; + +/** + * @brief RTC Configuration Structure definition + */ +typedef struct +{ + uint32_t HourFormat; /*!< Specifies the RTC Hour Format. + This parameter can be a value of @ref RTC_Hour_Formats */ + + uint32_t AsynchPrediv; /*!< Specifies the RTC Asynchronous Predivider value. + This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x7F */ + + uint32_t SynchPrediv; /*!< Specifies the RTC Synchronous Predivider value. + This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x7FFF */ + + uint32_t OutPut; /*!< Specifies which signal will be routed to the RTC output. + This parameter can be a value of @ref RTCEx_Output_selection_Definitions */ + + uint32_t OutPutPolarity; /*!< Specifies the polarity of the output signal. + This parameter can be a value of @ref RTC_Output_Polarity_Definitions */ + + uint32_t OutPutType; /*!< Specifies the RTC Output Pin mode. + This parameter can be a value of @ref RTC_Output_Type_ALARM_OUT */ +}RTC_InitTypeDef; + +/** + * @brief RTC Date structure definition + */ +typedef struct +{ + uint8_t WeekDay; /*!< Specifies the RTC Date WeekDay. + This parameter can be a value of @ref RTC_WeekDay_Definitions */ + + uint8_t Month; /*!< Specifies the RTC Date Month (in BCD format). + This parameter can be a value of @ref RTC_Month_Date_Definitions */ + + uint8_t Date; /*!< Specifies the RTC Date. + This parameter must be a number between Min_Data = 1 and Max_Data = 31 */ + + uint8_t Year; /*!< Specifies the RTC Date Year. + This parameter must be a number between Min_Data = 0 and Max_Data = 99 */ + +}RTC_DateTypeDef; + +/** + * @brief Time Handle Structure definition + */ +typedef struct +{ + RTC_TypeDef *Instance; /*!< Register base address */ + + RTC_InitTypeDef Init; /*!< RTC required parameters */ + + HAL_LockTypeDef Lock; /*!< RTC locking object */ + + __IO HAL_RTCStateTypeDef State; /*!< Time communication state */ + +}RTC_HandleTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup RTC_Exported_Constants RTC Exported Constants + * @{ + */ + +/** @defgroup RTC_Timeout_Value Default Timeout Value + * @{ + */ +#define RTC_TIMEOUT_VALUE 1000 +/** + * @} + */ + +/** @defgroup RTC_Hour_Formats Hour Formats + * @{ + */ +#define RTC_HOURFORMAT_24 (0x00000000U) +#define RTC_HOURFORMAT_12 (0x00000040U) + +#define IS_RTC_HOUR_FORMAT(FORMAT) (((FORMAT) == RTC_HOURFORMAT_12) || \ + ((FORMAT) == RTC_HOURFORMAT_24)) +/** + * @} + */ + +/** @defgroup RTC_Output_Polarity_Definitions Outpout Polarity + * @{ + */ +#define RTC_OUTPUT_POLARITY_HIGH (0x00000000U) +#define RTC_OUTPUT_POLARITY_LOW (0x00100000U) + +#define IS_RTC_OUTPUT_POL(POL) (((POL) == RTC_OUTPUT_POLARITY_HIGH) || \ + ((POL) == RTC_OUTPUT_POLARITY_LOW)) +/** + * @} + */ + +/** @defgroup RTC_Output_Type_ALARM_OUT Alarm Output Type + * @{ + */ +#define RTC_OUTPUT_TYPE_OPENDRAIN (0x00000000U) +#define RTC_OUTPUT_TYPE_PUSHPULL (0x00040000U) + +#define IS_RTC_OUTPUT_TYPE(TYPE) (((TYPE) == RTC_OUTPUT_TYPE_OPENDRAIN) || \ + ((TYPE) == RTC_OUTPUT_TYPE_PUSHPULL)) + +/** + * @} + */ + +/** @defgroup RTC_Asynchronous_Predivider Asynchronous Predivider + * @{ + */ +#define IS_RTC_ASYNCH_PREDIV(PREDIV) ((PREDIV) <= (uint32_t)0x7F) +/** + * @} + */ + +/** @defgroup RTC_Time_Definitions Time Definitions + * @{ + */ +#define IS_RTC_HOUR12(HOUR) (((HOUR) > (uint32_t)0) && ((HOUR) <= (uint32_t)12)) +#define IS_RTC_HOUR24(HOUR) ((HOUR) <= (uint32_t)23) +#define IS_RTC_MINUTES(MINUTES) ((MINUTES) <= (uint32_t)59) +#define IS_RTC_SECONDS(SECONDS) ((SECONDS) <= (uint32_t)59) +/** + * @} + */ + +/** @defgroup RTC_AM_PM_Definitions AM PM Definitions + * @{ + */ +#define RTC_HOURFORMAT12_AM ((uint8_t)0x00) +#define RTC_HOURFORMAT12_PM ((uint8_t)0x40) + +#define IS_RTC_HOURFORMAT12(PM) (((PM) == RTC_HOURFORMAT12_AM) || ((PM) == RTC_HOURFORMAT12_PM)) +/** + * @} + */ + +/** @defgroup RTC_DayLightSaving_Definitions DayLightSaving + * @{ + */ +#define RTC_DAYLIGHTSAVING_SUB1H (0x00020000U) +#define RTC_DAYLIGHTSAVING_ADD1H (0x00010000U) +#define RTC_DAYLIGHTSAVING_NONE (0x00000000U) + +#define IS_RTC_DAYLIGHT_SAVING(SAVE) (((SAVE) == RTC_DAYLIGHTSAVING_SUB1H) || \ + ((SAVE) == RTC_DAYLIGHTSAVING_ADD1H) || \ + ((SAVE) == RTC_DAYLIGHTSAVING_NONE)) +/** + * @} + */ + +/** @defgroup RTC_StoreOperation_Definitions StoreOperation + * @{ + */ +#define RTC_STOREOPERATION_RESET (0x00000000U) +#define RTC_STOREOPERATION_SET (0x00040000U) + +#define IS_RTC_STORE_OPERATION(OPERATION) (((OPERATION) == RTC_STOREOPERATION_RESET) || \ + ((OPERATION) == RTC_STOREOPERATION_SET)) +/** + * @} + */ + +/** @defgroup RTC_Input_parameter_format_definitions Input Parameter Format + * @{ + */ +#define RTC_FORMAT_BIN (0x000000000U) +#define RTC_FORMAT_BCD (0x000000001U) + +#define IS_RTC_FORMAT(FORMAT) (((FORMAT) == RTC_FORMAT_BIN) || ((FORMAT) == RTC_FORMAT_BCD)) +/** + * @} + */ + +/** @defgroup RTC_Year_Date_Definitions Year Definitions + * @{ + */ +#define IS_RTC_YEAR(YEAR) ((YEAR) <= (uint32_t)99) +/** + * @} + */ + +/** @defgroup RTC_Month_Date_Definitions Month Definitions + * @{ + */ + +/* Coded in BCD format */ +#define RTC_MONTH_JANUARY ((uint8_t)0x01) +#define RTC_MONTH_FEBRUARY ((uint8_t)0x02) +#define RTC_MONTH_MARCH ((uint8_t)0x03) +#define RTC_MONTH_APRIL ((uint8_t)0x04) +#define RTC_MONTH_MAY ((uint8_t)0x05) +#define RTC_MONTH_JUNE ((uint8_t)0x06) +#define RTC_MONTH_JULY ((uint8_t)0x07) +#define RTC_MONTH_AUGUST ((uint8_t)0x08) +#define RTC_MONTH_SEPTEMBER ((uint8_t)0x09) +#define RTC_MONTH_OCTOBER ((uint8_t)0x10) +#define RTC_MONTH_NOVEMBER ((uint8_t)0x11) +#define RTC_MONTH_DECEMBER ((uint8_t)0x12) + +#define IS_RTC_MONTH(MONTH) (((MONTH) >= (uint32_t)1) && ((MONTH) <= (uint32_t)12)) +#define IS_RTC_DATE(DATE) (((DATE) >= (uint32_t)1) && ((DATE) <= (uint32_t)31)) +/** + * @} + */ + +/** @defgroup RTC_WeekDay_Definitions WeekDay Definitions + * @{ + */ +#define RTC_WEEKDAY_MONDAY ((uint8_t)0x01) +#define RTC_WEEKDAY_TUESDAY ((uint8_t)0x02) +#define RTC_WEEKDAY_WEDNESDAY ((uint8_t)0x03) +#define RTC_WEEKDAY_THURSDAY ((uint8_t)0x04) +#define RTC_WEEKDAY_FRIDAY ((uint8_t)0x05) +#define RTC_WEEKDAY_SATURDAY ((uint8_t)0x06) +#define RTC_WEEKDAY_SUNDAY ((uint8_t)0x07) + +#define IS_RTC_WEEKDAY(WEEKDAY) (((WEEKDAY) == RTC_WEEKDAY_MONDAY) || \ + ((WEEKDAY) == RTC_WEEKDAY_TUESDAY) || \ + ((WEEKDAY) == RTC_WEEKDAY_WEDNESDAY) || \ + ((WEEKDAY) == RTC_WEEKDAY_THURSDAY) || \ + ((WEEKDAY) == RTC_WEEKDAY_FRIDAY) || \ + ((WEEKDAY) == RTC_WEEKDAY_SATURDAY) || \ + ((WEEKDAY) == RTC_WEEKDAY_SUNDAY)) +/** + * @} + */ + +/** @defgroup RTC_Alarm_Definitions Alarm Definitions + * @{ + */ +#define IS_RTC_ALARM_DATE_WEEKDAY_DATE(DATE) (((DATE) >(uint32_t) 0) && ((DATE) <= (uint32_t)31)) +#define IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(WEEKDAY) (((WEEKDAY) == RTC_WEEKDAY_MONDAY) || \ + ((WEEKDAY) == RTC_WEEKDAY_TUESDAY) || \ + ((WEEKDAY) == RTC_WEEKDAY_WEDNESDAY) || \ + ((WEEKDAY) == RTC_WEEKDAY_THURSDAY) || \ + ((WEEKDAY) == RTC_WEEKDAY_FRIDAY) || \ + ((WEEKDAY) == RTC_WEEKDAY_SATURDAY) || \ + ((WEEKDAY) == RTC_WEEKDAY_SUNDAY)) +/** + * @} + */ + + +/** @defgroup RTC_AlarmDateWeekDay_Definitions AlarmDateWeekDay Definitions + * @{ + */ +#define RTC_ALARMDATEWEEKDAYSEL_DATE (0x00000000U) +#define RTC_ALARMDATEWEEKDAYSEL_WEEKDAY (0x40000000U) + +#define IS_RTC_ALARM_DATE_WEEKDAY_SEL(SEL) (((SEL) == RTC_ALARMDATEWEEKDAYSEL_DATE) || \ + ((SEL) == RTC_ALARMDATEWEEKDAYSEL_WEEKDAY)) +/** + * @} + */ + + +/** @defgroup RTC_AlarmMask_Definitions Alarm Mask Definitions + * @{ + */ +#define RTC_ALARMMASK_NONE (0x00000000U) +#define RTC_ALARMMASK_DATEWEEKDAY RTC_ALRMAR_MSK4 +#define RTC_ALARMMASK_HOURS RTC_ALRMAR_MSK3 +#define RTC_ALARMMASK_MINUTES RTC_ALRMAR_MSK2 +#define RTC_ALARMMASK_SECONDS RTC_ALRMAR_MSK1 +#define RTC_ALARMMASK_ALL (0x80808080U) + +#define IS_RTC_ALARM_MASK(MASK) (((MASK) & 0x7F7F7F7F) == (uint32_t)RESET) +/** + * @} + */ + +/** @defgroup RTC_Alarms_Definitions Alarms Definitions + * @{ + */ +#define RTC_ALARM_A RTC_CR_ALRAE +#define RTC_ALARM_B RTC_CR_ALRBE + +#define IS_RTC_ALARM(ALARM) (((ALARM) == RTC_ALARM_A) || ((ALARM) == RTC_ALARM_B)) +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup RTC_Exported_macros RTC Exported Macros + * @{ + */ + +/** @brief Reset RTC handle state + * @param __HANDLE__: RTC handle. + * @retval None + */ +#define __HAL_RTC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_RTC_STATE_RESET) + +/** + * @brief Disable the write protection for RTC registers. + * @param __HANDLE__: specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_WRITEPROTECTION_DISABLE(__HANDLE__) \ + do{ \ + (__HANDLE__)->Instance->WPR = 0xCA; \ + (__HANDLE__)->Instance->WPR = 0x53; \ + } while(0) + +/** + * @brief Enable the write protection for RTC registers. + * @param __HANDLE__: specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_WRITEPROTECTION_ENABLE(__HANDLE__) \ + do{ \ + (__HANDLE__)->Instance->WPR = 0xFF; \ + } while(0) + + +/** + * @brief Enable the RTC ALARMA peripheral. + * @param __HANDLE__: specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_ALARMA_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_ALRAE)) + +/** + * @brief Disable the RTC ALARMA peripheral. + * @param __HANDLE__: specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_ALARMA_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_ALRAE)) + +/** + * @brief Enable the RTC ALARMB peripheral. + * @param __HANDLE__: specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_ALARMB_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_ALRBE)) + +/** + * @brief Disable the RTC ALARMB peripheral. + * @param __HANDLE__: specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_ALARMB_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_ALRBE)) + +/** + * @brief Enable the RTC Alarm interrupt. + * @param __HANDLE__: specifies the RTC handle. + * @param __INTERRUPT__: specifies the RTC Alarm interrupt sources to be enabled or disabled. + * This parameter can be any combination of the following values: + * @arg RTC_IT_ALRA: Alarm A interrupt + * @arg RTC_IT_ALRB: Alarm B interrupt + * @retval None + */ +#define __HAL_RTC_ALARM_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__)) + +/** + * @brief Disable the RTC Alarm interrupt. + * @param __HANDLE__: specifies the RTC handle. + * @param __INTERRUPT__: specifies the RTC Alarm interrupt sources to be enabled or disabled. + * This parameter can be any combination of the following values: + * @arg RTC_IT_ALRA: Alarm A interrupt + * @arg RTC_IT_ALRB: Alarm B interrupt + * @retval None + */ +#define __HAL_RTC_ALARM_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__)) + +/** + * @brief Check whether the specified RTC Alarm interrupt has occurred or not. + * @param __HANDLE__: specifies the RTC handle. + * @param __INTERRUPT__: specifies the RTC Alarm interrupt sources to check. + * This parameter can be: + * @arg RTC_IT_ALRA: Alarm A interrupt + * @arg RTC_IT_ALRB: Alarm B interrupt + * @retval None + */ +#define __HAL_RTC_ALARM_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->ISR)& ((__INTERRUPT__)>> 4)) != RESET)? SET : RESET) + +/** + * @brief Check whether the specified RTC Alarm interrupt has been enabled or not. + * @param __HANDLE__: specifies the RTC handle. + * @param __INTERRUPT__: specifies the RTC Alarm interrupt sources to check. + * This parameter can be: + * @arg RTC_IT_ALRA: Alarm A interrupt + * @arg RTC_IT_ALRB: Alarm B interrupt + * @retval None + */ +#define __HAL_RTC_ALARM_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->CR) & (__INTERRUPT__)) != RESET) ? SET : RESET) + +/** + * @brief Get the selected RTC Alarm's flag status. + * @param __HANDLE__: specifies the RTC handle. + * @param __FLAG__: specifies the RTC Alarm Flag sources to check. + * This parameter can be: + * @arg RTC_FLAG_ALRAF + * @arg RTC_FLAG_ALRBF + * @arg RTC_FLAG_ALRAWF + * @arg RTC_FLAG_ALRBWF + * @retval None + */ +#define __HAL_RTC_ALARM_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET) + +/** + * @brief Clear the RTC Alarm's pending flags. + * @param __HANDLE__: specifies the RTC handle. + * @param __FLAG__: specifies the RTC Alarm Flag sources to clear. + * This parameter can be: + * @arg RTC_FLAG_ALRAF + * @arg RTC_FLAG_ALRBF + * @retval None + */ +#define __HAL_RTC_ALARM_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT) | ((__HANDLE__)->Instance->ISR & RTC_ISR_INIT)) + +/** + * @brief Enable interrupt on the RTC Alarm associated Exti line. + * @retval None + */ +#define __HAL_RTC_ALARM_EXTI_ENABLE_IT() (EXTI->IMR |= RTC_EXTI_LINE_ALARM_EVENT) + +/** + * @brief Disable interrupt on the RTC Alarm associated Exti line. + * @retval None + */ +#define __HAL_RTC_ALARM_EXTI_DISABLE_IT() (EXTI->IMR &= ~(RTC_EXTI_LINE_ALARM_EVENT)) + +/** + * @brief Enable event on the RTC Alarm associated Exti line. + * @retval None. + */ +#define __HAL_RTC_ALARM_EXTI_ENABLE_EVENT() (EXTI->EMR |= RTC_EXTI_LINE_ALARM_EVENT) + +/** + * @brief Disable event on the RTC Alarm associated Exti line. + * @retval None. + */ +#define __HAL_RTC_ALARM_EXTI_DISABLE_EVENT() (EXTI->EMR &= ~(RTC_EXTI_LINE_ALARM_EVENT)) + +/** + * @brief Enable falling edge trigger on the RTC Alarm associated Exti line. + * @retval None. + */ +#define __HAL_RTC_ALARM_EXTI_ENABLE_FALLING_EDGE() (EXTI->FTSR |= RTC_EXTI_LINE_ALARM_EVENT) + +/** + * @brief Disable falling edge trigger on the RTC Alarm associated Exti line. + * @retval None. + */ +#define __HAL_RTC_ALARM_EXTI_DISABLE_FALLING_EDGE() (EXTI->FTSR &= ~(RTC_EXTI_LINE_ALARM_EVENT)) + +/** + * @brief Enable rising edge trigger on the RTC Alarm associated Exti line. + * @retval None. + */ +#define __HAL_RTC_ALARM_EXTI_ENABLE_RISING_EDGE() (EXTI->RTSR |= RTC_EXTI_LINE_ALARM_EVENT) + +/** + * @brief Disable rising edge trigger on the RTC Alarm associated Exti line. + * @retval None. + */ +#define __HAL_RTC_ALARM_EXTI_DISABLE_RISING_EDGE() (EXTI->RTSR &= ~(RTC_EXTI_LINE_ALARM_EVENT)) + +/** + * @brief Enable rising & falling edge trigger on the RTC Alarm associated Exti line. + * @retval None. + */ +#define __HAL_RTC_ALARM_EXTI_ENABLE_RISING_FALLING_EDGE() do { __HAL_RTC_ALARM_EXTI_ENABLE_RISING_EDGE();__HAL_RTC_ALARM_EXTI_ENABLE_FALLING_EDGE(); } while(0); + +/** + * @brief Disable rising & falling edge trigger on the RTC Alarm associated Exti line. + * @retval None. + */ +#define __HAL_RTC_ALARM_EXTI_DISABLE_RISING_FALLING_EDGE() do { __HAL_RTC_ALARM_EXTI_DISABLE_RISING_EDGE();__HAL_RTC_ALARM_EXTI_DISABLE_FALLING_EDGE(); } while(0); + +/** + * @brief Check whether the RTC Alarm associated Exti line interrupt flag is set or not. + * @retval Line Status. + */ +#define __HAL_RTC_ALARM_EXTI_GET_FLAG() (EXTI->PR & RTC_EXTI_LINE_ALARM_EVENT) + +/** + * @brief Clear the RTC Alarm associated Exti line flag. + * @retval None. + */ +#define __HAL_RTC_ALARM_EXTI_CLEAR_FLAG() (EXTI->PR = RTC_EXTI_LINE_ALARM_EVENT) + +/** + * @brief Generate a Software interrupt on RTC Alarm associated Exti line. + * @retval None. + */ +#define __HAL_RTC_ALARM_EXTI_GENERATE_SWIT() (EXTI->SWIER |= RTC_EXTI_LINE_ALARM_EVENT) + +/** + * @} + */ + +/* Include RTC HAL Extension module */ +#include "stm32l1xx_hal_rtc_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup RTC_Exported_Functions + * @{ + */ + + +/* Initialization and de-initialization functions ****************************/ +/** @addtogroup RTC_Exported_Functions_Group1 + * @{ + */ +HAL_StatusTypeDef HAL_RTC_Init(RTC_HandleTypeDef *hrtc); +HAL_StatusTypeDef HAL_RTC_DeInit(RTC_HandleTypeDef *hrtc); +void HAL_RTC_MspInit(RTC_HandleTypeDef *hrtc); +void HAL_RTC_MspDeInit(RTC_HandleTypeDef *hrtc); +/** + * @} + */ + +/* RTC Time and Date functions ************************************************/ +/** @addtogroup RTC_Exported_Functions_Group1 + * @{ + */ +HAL_StatusTypeDef HAL_RTC_SetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format); +HAL_StatusTypeDef HAL_RTC_GetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format); +HAL_StatusTypeDef HAL_RTC_SetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format); +HAL_StatusTypeDef HAL_RTC_GetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format); +/** + * @} + */ + +/* RTC Alarm functions ********************************************************/ +/** @addtogroup RTC_Exported_Functions_Group2 + * @{ + */ +HAL_StatusTypeDef HAL_RTC_SetAlarm(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Format); +HAL_StatusTypeDef HAL_RTC_SetAlarm_IT(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Format); +HAL_StatusTypeDef HAL_RTC_DeactivateAlarm(RTC_HandleTypeDef *hrtc, uint32_t Alarm); +HAL_StatusTypeDef HAL_RTC_GetAlarm(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Alarm, uint32_t Format); +void HAL_RTC_AlarmIRQHandler(RTC_HandleTypeDef *hrtc); +HAL_StatusTypeDef HAL_RTC_PollForAlarmAEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout); +void HAL_RTC_AlarmAEventCallback(RTC_HandleTypeDef *hrtc); +/** + * @} + */ + +/* Peripheral Control functions ***********************************************/ +/** @addtogroup RTC_Exported_Functions_Group3 + * @{ + */ +HAL_StatusTypeDef HAL_RTC_WaitForSynchro(RTC_HandleTypeDef* hrtc); +/** + * @} + */ + +/* Peripheral State functions *************************************************/ +/** @addtogroup RTC_Exported_Functions_Group5 + * @{ + */ +HAL_RTCStateTypeDef HAL_RTC_GetState(RTC_HandleTypeDef *hrtc); +/** + * @} + */ + +/** + * @} + */ +/* Private functions **********************************************************/ +/** @addtogroup RTC_Internal_Functions + * @{ + */ +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @defgroup RTC_Private_Constants RTC Private Constants + * @{ + */ + +#define RTC_EXTI_LINE_ALARM_EVENT ((uint32_t)EXTI_IMR_MR17) /*!< External interrupt line 17 Connected to the RTC Alarm event */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup RTC_Private_Macros RTC Private Macros + * @{ + */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @defgroup RTC_Private_Functions RTC Private Functions + * @{ + */ +HAL_StatusTypeDef RTC_EnterInitMode(RTC_HandleTypeDef* hrtc); +uint8_t RTC_ByteToBcd2(uint8_t Value); +uint8_t RTC_Bcd2ToByte(uint8_t Value); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32L1xx_HAL_RTC_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_rtc_ex.h b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_rtc_ex.h new file mode 100755 index 0000000..13e66fa --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_rtc_ex.h @@ -0,0 +1,1293 @@ +/** + ****************************************************************************** + * @file stm32l1xx_hal_rtc_ex.h + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief Header file of RTC HAL Extension module. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L1xx_HAL_RTC_EX_H +#define __STM32L1xx_HAL_RTC_EX_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_hal_def.h" + +/** @addtogroup STM32L1xx_HAL_Driver + * @{ + */ + +/** @addtogroup RTCEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup RTCEx_Exported_Types RTCEx Exported Types + * @{ + */ + +/** + * @brief RTC Tamper structure definition + */ +typedef struct +{ + uint32_t Tamper; /*!< Specifies the Tamper Pin. + This parameter can be a value of @ref RTCEx_Tamper_Pins_Definitions */ + + uint32_t Trigger; /*!< Specifies the Tamper Trigger. + This parameter can be a value of @ref RTCEx_Tamper_Trigger_Definitions */ + +#if defined(STM32L100xBA) || defined (STM32L151xBA) || defined (STM32L152xBA) || defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) + uint32_t Filter; /*!< Specifies the RTC Filter Tamper. + This parameter can be a value of @ref RTCEx_Tamper_Filter_Definitions */ + + uint32_t SamplingFrequency; /*!< Specifies the sampling frequency. + This parameter can be a value of @ref RTCEx_Tamper_Sampling_Frequencies_Definitions */ + + uint32_t PrechargeDuration; /*!< Specifies the Precharge Duration . + This parameter can be a value of @ref RTCEx_Tamper_Pin_Precharge_Duration_Definitions */ + + uint32_t TamperPullUp; /*!< Specifies the Tamper PullUp . + This parameter can be a value of @ref RTCEx_Tamper_Pull_Up_Definitions */ + + uint32_t TimeStampOnTamperDetection; /*!< Specifies the TimeStampOnTamperDetection. + This parameter can be a value of @ref RTCEx_Tamper_TimeStampOnTamperDetection_Definitions */ +#endif /* STM32L100xBA || STM32L151xBA || STM32L152xBA || STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ +}RTC_TamperTypeDef; + +/** + * @brief RTC Time structure definition + */ +typedef struct +{ + uint8_t Hours; /*!< Specifies the RTC Time Hour. + This parameter must be a number between Min_Data = 0 and Max_Data = 12 if the RTC_HourFormat_12 is selected + This parameter must be a number between Min_Data = 0 and Max_Data = 23 if the RTC_HourFormat_24 is selected */ + + uint8_t Minutes; /*!< Specifies the RTC Time Minutes. + This parameter must be a number between Min_Data = 0 and Max_Data = 59 */ + + uint8_t Seconds; /*!< Specifies the RTC Time Seconds. + This parameter must be a number between Min_Data = 0 and Max_Data = 59 */ + + uint8_t TimeFormat; /*!< Specifies the RTC AM/PM Time. + This parameter can be a value of @ref RTC_AM_PM_Definitions */ + +#if defined(STM32L100xBA) || defined (STM32L151xBA) || defined (STM32L152xBA) || defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) + uint32_t SubSeconds; /*!< Specifies the RTC_SSR RTC Sub Second register content. + This parameter corresponds to a time unit range between [0-1] Second + with [1 Sec / SecondFraction +1] granularity */ + + uint32_t SecondFraction; /*!< Specifies the range or granularity of Sub Second register content + corresponding to Synchronous pre-scaler factor value (PREDIV_S) + This parameter corresponds to a time unit range between [0-1] Second + with [1 Sec / SecondFraction +1] granularity. + This field will be used only by HAL_RTC_GetTime function */ +#endif /* STM32L100xBA || STM32L151xBA || STM32L152xBA || STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ + + uint32_t DayLightSaving; /*!< Specifies RTC_DayLightSaveOperation: the value of hour adjustment. + This parameter can be a value of @ref RTC_DayLightSaving_Definitions */ + + uint32_t StoreOperation; /*!< Specifies RTC_StoreOperation value to be written in the BCK bit + in CR register to store the operation. + This parameter can be a value of @ref RTC_StoreOperation_Definitions */ +}RTC_TimeTypeDef; + +/** + * @brief RTC Alarm structure definition + */ +typedef struct +{ + RTC_TimeTypeDef AlarmTime; /*!< Specifies the RTC Alarm Time members */ + + uint32_t AlarmMask; /*!< Specifies the RTC Alarm Masks. + This parameter can be a value of @ref RTC_AlarmMask_Definitions */ + +#if defined(STM32L100xBA) || defined (STM32L151xBA) || defined (STM32L152xBA) || defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) + uint32_t AlarmSubSecondMask; /*!< Specifies the RTC Alarm SubSeconds Masks. + This parameter can be a value of @ref RTC_Alarm_Sub_Seconds_Masks_Definitions */ +#endif /* STM32L100xBA || STM32L151xBA || STM32L152xBA || STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ + + uint32_t AlarmDateWeekDaySel; /*!< Specifies the RTC Alarm is on Date or WeekDay. + This parameter can be a value of @ref RTC_AlarmDateWeekDay_Definitions */ + + uint8_t AlarmDateWeekDay; /*!< Specifies the RTC Alarm Date/WeekDay. + If the Alarm Date is selected, this parameter must be set to a value in the 1-31 range. + If the Alarm WeekDay is selected, this parameter can be a value of @ref RTC_WeekDay_Definitions */ + + uint32_t Alarm; /*!< Specifies the alarm . + This parameter can be a value of @ref RTC_Alarms_Definitions */ +}RTC_AlarmTypeDef; +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup RTCEx_Exported_Constants RTCEx Exported Constants + * @{ + */ + +/** @defgroup RTC_Masks_Definitions Masks Definitions + * @{ + */ +#define RTC_TR_RESERVED_MASK (0x007F7F7FU) +#define RTC_DR_RESERVED_MASK (0x00FFFF3FU) +#define RTC_INIT_MASK ((uint32_t)0xFFFFFFFFU) +#define RTC_RSF_MASK ((uint32_t)0xFFFFFF5FU) + +#if defined(STM32L100xBA) || defined (STM32L151xBA) || defined (STM32L152xBA) || defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) +#define RTC_FLAGS_MASK ((uint32_t)(RTC_FLAG_ALRAWF | RTC_FLAG_ALRBWF | RTC_FLAG_WUTWF | \ + RTC_FLAG_SHPF | RTC_FLAG_INITS | RTC_FLAG_RSF | \ + RTC_FLAG_INITF | RTC_FLAG_ALRAF | RTC_FLAG_ALRBF | \ + RTC_FLAG_WUTF | RTC_FLAG_TSF | RTC_FLAG_TSOVF | \ + RTC_FLAG_TAMP1F | RTC_FLAG_TAMP2F | RTC_FLAG_TAMP3F | \ + RTC_FLAG_RECALPF)) +#else +#define RTC_FLAGS_MASK ((uint32_t)(RTC_FLAG_ALRAWF | RTC_FLAG_ALRBWF | RTC_FLAG_WUTWF | \ + RTC_FLAG_SHPF | RTC_FLAG_INITS | RTC_FLAG_RSF | \ + RTC_FLAG_INITF | RTC_FLAG_ALRAF | RTC_FLAG_ALRBF | \ + RTC_FLAG_WUTF | RTC_FLAG_TSF | RTC_FLAG_TSOVF | \ + RTC_FLAG_TAMP1F | \ + RTC_FLAG_RECALPF)) + +#endif /* STM32L100xBA || STM32L151xBA || STM32L152xBA || STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ +/** + * @} + */ + +/** @defgroup RTC_Synchronous_Predivider Synchronous Predivider + * @{ + */ +#if defined(STM32L100xBA) || defined (STM32L151xBA) || defined (STM32L152xBA) || defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) +#define IS_RTC_SYNCH_PREDIV(PREDIV) ((PREDIV) <= (uint32_t)0x7FFF) +#elif defined(STM32L100xB) || defined (STM32L151xB) || defined (STM32L152xB) +#define IS_RTC_SYNCH_PREDIV(PREDIV) ((PREDIV) <= (uint32_t)0x1FFF) +#endif /* STM32L100xBA || STM32L151xBA || STM32L152xBA || STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ +/** + * @} + */ + +/** @defgroup RTC_Interrupts_Definitions Interrupts Definitions + * @{ + */ +#define RTC_IT_TS ((uint32_t)RTC_CR_TSIE) +#define RTC_IT_WUT ((uint32_t)RTC_CR_WUTIE) +#define RTC_IT_ALRB ((uint32_t)RTC_CR_ALRBIE) +#define RTC_IT_ALRA ((uint32_t)RTC_CR_ALRAIE) +#define RTC_IT_TAMP1 ((uint32_t)(RTC_TAFCR_TAMPIE | RTC_TAFCR_TAMP1E)) +#if defined(STM32L100xBA) || defined (STM32L151xBA) || defined (STM32L152xBA) || defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) +#define RTC_IT_TAMP2 ((uint32_t)(RTC_TAFCR_TAMPIE | RTC_TAFCR_TAMP2E)) +#define RTC_IT_TAMP3 ((uint32_t)(RTC_TAFCR_TAMPIE | RTC_TAFCR_TAMP3E)) +#endif /* STM32L100xBA || STM32L151xBA || STM32L152xBA || STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ +/** + * @} + */ + +/** @defgroup RTC_Flags_Definitions Flags Definitions + * @{ + */ +#define RTC_FLAG_RECALPF ((uint32_t)RTC_ISR_RECALPF) +#if defined(STM32L100xBA) || defined (STM32L151xBA) || defined (STM32L152xBA) || defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) +#define RTC_FLAG_TAMP3F ((uint32_t)RTC_ISR_TAMP3F) +#define RTC_FLAG_TAMP2F ((uint32_t)RTC_ISR_TAMP2F) +#endif /* STM32L100xBA || STM32L151xBA || STM32L152xBA || STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ +#define RTC_FLAG_TAMP1F ((uint32_t)RTC_ISR_TAMP1F) +#define RTC_FLAG_TSOVF ((uint32_t)RTC_ISR_TSOVF) +#define RTC_FLAG_TSF ((uint32_t)RTC_ISR_TSF) +#define RTC_FLAG_WUTF ((uint32_t)RTC_ISR_WUTF) +#define RTC_FLAG_ALRBF ((uint32_t)RTC_ISR_ALRBF) +#define RTC_FLAG_ALRAF ((uint32_t)RTC_ISR_ALRAF) +#define RTC_FLAG_INITF ((uint32_t)RTC_ISR_INITF) +#define RTC_FLAG_RSF ((uint32_t)RTC_ISR_RSF) +#define RTC_FLAG_INITS ((uint32_t)RTC_ISR_INITS) +#if defined(STM32L100xBA) || defined (STM32L151xBA) || defined (STM32L152xBA) || defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) +#define RTC_FLAG_SHPF ((uint32_t)RTC_ISR_SHPF) +#endif /* STM32L100xBA || STM32L151xBA || STM32L152xBA || STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ +#define RTC_FLAG_WUTWF ((uint32_t)RTC_ISR_WUTWF) +#define RTC_FLAG_ALRBWF ((uint32_t)RTC_ISR_ALRBWF) +#define RTC_FLAG_ALRAWF ((uint32_t)RTC_ISR_ALRAWF) +/** + * @} + */ + +/** @defgroup RTCEx_Output_selection_Definitions Output selection Definitions + * @{ + */ +#define RTC_OUTPUT_DISABLE (0x00000000U) +#define RTC_OUTPUT_ALARMA (0x00200000U) +#define RTC_OUTPUT_ALARMB (0x00400000U) +#define RTC_OUTPUT_WAKEUP (0x00600000U) + +#define IS_RTC_OUTPUT(OUTPUT) (((OUTPUT) == RTC_OUTPUT_DISABLE) || \ + ((OUTPUT) == RTC_OUTPUT_ALARMA) || \ + ((OUTPUT) == RTC_OUTPUT_ALARMB) || \ + ((OUTPUT) == RTC_OUTPUT_WAKEUP)) +/** + * @} + */ + +/** @defgroup RTCEx_Backup_Registers_Definitions Backup Registers Definitions + * @{ + */ +#if RTC_BKP_NUMBER > 0 +#define RTC_BKP_DR0 (0x00000000U) +#define RTC_BKP_DR1 (0x00000001U) +#define RTC_BKP_DR2 (0x00000002U) +#define RTC_BKP_DR3 (0x00000003U) +#define RTC_BKP_DR4 (0x00000004U) +#endif /* RTC_BKP_NUMBER > 0 */ + +#if RTC_BKP_NUMBER > 5 +#define RTC_BKP_DR5 (0x00000005U) +#define RTC_BKP_DR6 (0x00000006U) +#define RTC_BKP_DR7 (0x00000007U) +#define RTC_BKP_DR8 (0x00000008U) +#define RTC_BKP_DR9 (0x00000009U) +#define RTC_BKP_DR10 (0x0000000AU) +#define RTC_BKP_DR11 (0x0000000BU) +#define RTC_BKP_DR12 (0x0000000CU) +#define RTC_BKP_DR13 (0x0000000DU) +#define RTC_BKP_DR14 (0x0000000EU) +#define RTC_BKP_DR15 (0x0000000FU) +#define RTC_BKP_DR16 (0x00000010U) +#define RTC_BKP_DR17 (0x00000011U) +#define RTC_BKP_DR18 (0x00000012U) +#define RTC_BKP_DR19 (0x00000013U) +#endif /* RTC_BKP_NUMBER > 5 */ + +#if RTC_BKP_NUMBER > 20 +#define RTC_BKP_DR20 (0x00000014U) +#define RTC_BKP_DR21 (0x00000015U) +#define RTC_BKP_DR22 (0x00000016U) +#define RTC_BKP_DR23 (0x00000017U) +#define RTC_BKP_DR24 (0x00000018U) +#define RTC_BKP_DR25 (0x00000019U) +#define RTC_BKP_DR26 (0x0000001AU) +#define RTC_BKP_DR27 (0x0000001BU) +#define RTC_BKP_DR28 (0x0000001CU) +#define RTC_BKP_DR29 (0x0000001DU) +#define RTC_BKP_DR30 (0x0000001EU) +#define RTC_BKP_DR31 (0x0000001FU) +#endif /* RTC_BKP_NUMBER > 20 */ + +#define IS_RTC_BKP(BKP) ((BKP) < (uint32_t) RTC_BKP_NUMBER) +/** + * @} + */ + +/** @defgroup RTCEx_Time_Stamp_Edges_Definitions Time Stamp Edges Definitions + * @{ + */ +#define RTC_TIMESTAMPEDGE_RISING (0x00000000U) +#define RTC_TIMESTAMPEDGE_FALLING (0x00000008U) + +#define IS_TIMESTAMP_EDGE(EDGE) (((EDGE) == RTC_TIMESTAMPEDGE_RISING) || \ + ((EDGE) == RTC_TIMESTAMPEDGE_FALLING)) +/** + * @} + */ + +/** @defgroup RTCEx_Tamper_Pins_Definitions Tamper Pins Definitions + * @{ + */ +#define RTC_TAMPER_1 RTC_TAFCR_TAMP1E +#if defined(STM32L100xBA) || defined (STM32L151xBA) || defined (STM32L152xBA) || defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) +#define RTC_TAMPER_2 RTC_TAFCR_TAMP2E +#define RTC_TAMPER_3 RTC_TAFCR_TAMP3E +#endif /* STM32L100xBA || STM32L151xBA || STM32L152xBA || STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ + +#if defined(STM32L100xBA) || defined (STM32L151xBA) || defined (STM32L152xBA) || defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) +#define IS_RTC_TAMPER(TAMPER) (((~(RTC_TAMPER_1|RTC_TAMPER_2|RTC_TAMPER_3) & (TAMPER)) == (uint32_t)RESET) && ((TAMPER) != (uint32_t)RESET)) +#else +#define IS_RTC_TAMPER(TAMPER) ((TAMPER) == RTC_TAMPER_1) +#endif /* STM32L100xBA || STM32L151xBA || STM32L152xBA || STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ +/** + * @} + */ + +/** @defgroup RTCEx_Tamper_Trigger_Definitions Tamper Trigger Definitions + * @{ + */ +#define RTC_TAMPERTRIGGER_RISINGEDGE (0x00000000U) +#define RTC_TAMPERTRIGGER_FALLINGEDGE (0x00000002U) +#if defined(STM32L100xBA) || defined (STM32L151xBA) || defined (STM32L152xBA) || defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) +#define RTC_TAMPERTRIGGER_LOWLEVEL RTC_TAMPERTRIGGER_RISINGEDGE +#define RTC_TAMPERTRIGGER_HIGHLEVEL RTC_TAMPERTRIGGER_FALLINGEDGE +#endif /* STM32L100xBA || STM32L151xBA || STM32L152xBA || STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ + +#if defined(STM32L100xBA) || defined (STM32L151xBA) || defined (STM32L152xBA) || defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) +#define IS_RTC_TAMPER_TRIGGER(TRIGGER) (((TRIGGER) == RTC_TAMPERTRIGGER_RISINGEDGE) || \ + ((TRIGGER) == RTC_TAMPERTRIGGER_FALLINGEDGE) || \ + ((TRIGGER) == RTC_TAMPERTRIGGER_LOWLEVEL) || \ + ((TRIGGER) == RTC_TAMPERTRIGGER_HIGHLEVEL)) +#elif defined(STM32L100xB) || defined (STM32L151xB) || defined (STM32L152xB) +#define IS_RTC_TAMPER_TRIGGER(TRIGGER) (((TRIGGER) == RTC_TAMPERTRIGGER_RISINGEDGE) || \ + ((TRIGGER) == RTC_TAMPERTRIGGER_FALLINGEDGE)) +#endif /* STM32L100xBA || STM32L151xBA || STM32L152xBA || STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ +/** + * @} + */ + +#if defined(STM32L100xBA) || defined (STM32L151xBA) || defined (STM32L152xBA) || defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) +/** @defgroup RTCEx_Tamper_Filter_Definitions Tamper Filter Definitions + * @{ + */ +#define RTC_TAMPERFILTER_DISABLE (0x00000000U) /*!< Tamper filter is disabled */ + +#define RTC_TAMPERFILTER_2SAMPLE (0x00000800U) /*!< Tamper is activated after 2 + consecutive samples at the active level */ +#define RTC_TAMPERFILTER_4SAMPLE (0x00001000U) /*!< Tamper is activated after 4 + consecutive samples at the active level */ +#define RTC_TAMPERFILTER_8SAMPLE (0x00001800U) /*!< Tamper is activated after 8 + consecutive samples at the active level. */ + +#define IS_RTC_TAMPER_FILTER(FILTER) (((FILTER) == RTC_TAMPERFILTER_DISABLE) || \ + ((FILTER) == RTC_TAMPERFILTER_2SAMPLE) || \ + ((FILTER) == RTC_TAMPERFILTER_4SAMPLE) || \ + ((FILTER) == RTC_TAMPERFILTER_8SAMPLE)) +/** + * @} + */ + +/** @defgroup RTCEx_Tamper_Sampling_Frequencies_Definitions Tamper Sampling Frequencies + * @{ + */ +#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV32768 (0x00000000U) /*!< Each of the tamper inputs are sampled + with a frequency = RTCCLK / 32768 */ +#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV16384 (0x00000100U) /*!< Each of the tamper inputs are sampled + with a frequency = RTCCLK / 16384 */ +#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV8192 (0x00000200U) /*!< Each of the tamper inputs are sampled + with a frequency = RTCCLK / 8192 */ +#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV4096 (0x00000300U) /*!< Each of the tamper inputs are sampled + with a frequency = RTCCLK / 4096 */ +#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV2048 (0x00000400U) /*!< Each of the tamper inputs are sampled + with a frequency = RTCCLK / 2048 */ +#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV1024 (0x00000500U) /*!< Each of the tamper inputs are sampled + with a frequency = RTCCLK / 1024 */ +#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV512 (0x00000600U) /*!< Each of the tamper inputs are sampled + with a frequency = RTCCLK / 512 */ +#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV256 (0x00000700U) /*!< Each of the tamper inputs are sampled + with a frequency = RTCCLK / 256 */ + +#define IS_RTC_TAMPER_SAMPLING_FREQ(FREQ) (((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV32768)|| \ + ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV16384)|| \ + ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV8192) || \ + ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV4096) || \ + ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV2048) || \ + ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV1024) || \ + ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV512) || \ + ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV256)) +/** + * @} + */ + +/** @defgroup RTCEx_Tamper_Pin_Precharge_Duration_Definitions Tamper Pin Precharge Duration + * @{ + */ +#define RTC_TAMPERPRECHARGEDURATION_1RTCCLK (0x00000000U) /*!< Tamper pins are pre-charged before + sampling during 1 RTCCLK cycle */ +#define RTC_TAMPERPRECHARGEDURATION_2RTCCLK (0x00002000U) /*!< Tamper pins are pre-charged before + sampling during 2 RTCCLK cycles */ +#define RTC_TAMPERPRECHARGEDURATION_4RTCCLK (0x00004000U) /*!< Tamper pins are pre-charged before + sampling during 4 RTCCLK cycles */ +#define RTC_TAMPERPRECHARGEDURATION_8RTCCLK (0x00006000U) /*!< Tamper pins are pre-charged before + sampling during 8 RTCCLK cycles */ + +#define IS_RTC_TAMPER_PRECHARGE_DURATION(DURATION) (((DURATION) == RTC_TAMPERPRECHARGEDURATION_1RTCCLK) || \ + ((DURATION) == RTC_TAMPERPRECHARGEDURATION_2RTCCLK) || \ + ((DURATION) == RTC_TAMPERPRECHARGEDURATION_4RTCCLK) || \ + ((DURATION) == RTC_TAMPERPRECHARGEDURATION_8RTCCLK)) +/** + * @} + */ + +/** @defgroup RTCEx_Tamper_TimeStampOnTamperDetection_Definitions TimeStampOnTamperDetection Definitions + * @{ + */ +#define RTC_TIMESTAMPONTAMPERDETECTION_ENABLE ((uint32_t)RTC_TAFCR_TAMPTS) /*!< TimeStamp on Tamper Detection event saved */ +#define RTC_TIMESTAMPONTAMPERDETECTION_DISABLE (0x00000000U) /*!< TimeStamp on Tamper Detection event is not saved */ + +#define IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION(DETECTION) (((DETECTION) == RTC_TIMESTAMPONTAMPERDETECTION_ENABLE) || \ + ((DETECTION) == RTC_TIMESTAMPONTAMPERDETECTION_DISABLE)) +/** + * @} + */ + +/** @defgroup RTCEx_Tamper_Pull_Up_Definitions Tamper Pull-Up Definitions + * @{ + */ +#define RTC_TAMPER_PULLUP_ENABLE (0x00000000U) /*!< TimeStamp on Tamper Detection event saved */ +#define RTC_TAMPER_PULLUP_DISABLE (RTC_TAFCR_TAMPPUDIS) /*!< TimeStamp on Tamper Detection event is not saved */ + +#define IS_RTC_TAMPER_PULLUP_STATE(STATE) (((STATE) == RTC_TAMPER_PULLUP_ENABLE) || \ + ((STATE) == RTC_TAMPER_PULLUP_DISABLE)) +/** + * @} + */ +#endif /* STM32L100xBA || STM32L151xBA || STM32L152xBA || STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ + +/** @defgroup RTCEx_Wakeup_Timer_Definitions Wakeup Timer Definitions + * @{ + */ +#define RTC_WAKEUPCLOCK_RTCCLK_DIV16 (0x00000000U) +#define RTC_WAKEUPCLOCK_RTCCLK_DIV8 (0x00000001U) +#define RTC_WAKEUPCLOCK_RTCCLK_DIV4 (0x00000002U) +#define RTC_WAKEUPCLOCK_RTCCLK_DIV2 (0x00000003U) +#define RTC_WAKEUPCLOCK_CK_SPRE_16BITS (0x00000004U) +#define RTC_WAKEUPCLOCK_CK_SPRE_17BITS (0x00000006U) + +#define IS_RTC_WAKEUP_CLOCK(CLOCK) (((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV16) || \ + ((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV8) || \ + ((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV4) || \ + ((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV2) || \ + ((CLOCK) == RTC_WAKEUPCLOCK_CK_SPRE_16BITS) || \ + ((CLOCK) == RTC_WAKEUPCLOCK_CK_SPRE_17BITS)) + +#define IS_RTC_WAKEUP_COUNTER(COUNTER) ((COUNTER) <= 0xFFFF) +/** + * @} + */ + +/** @defgroup RTCEx_Digital_Calibration_Definitions Digital Calibration Definitions + * @{ + */ +#define RTC_CALIBSIGN_POSITIVE (0x00000000U) +#define RTC_CALIBSIGN_NEGATIVE (0x00000080U) + +#define IS_RTC_CALIB_SIGN(SIGN) (((SIGN) == RTC_CALIBSIGN_POSITIVE) || \ + ((SIGN) == RTC_CALIBSIGN_NEGATIVE)) + +#define IS_RTC_CALIB_VALUE(VALUE) ((VALUE) < 0x20) +/** + * @} + */ + +/** @defgroup RTCEx_Smooth_Calib_Period_Definitions Smooth Calib Period Definitions + * @{ + */ +#define RTC_SMOOTHCALIB_PERIOD_32SEC (0x00000000U) /*!< If RTCCLK = 32768 Hz, Smooth calibation + period is 32s, else 2exp20 RTCCLK seconds */ +#define RTC_SMOOTHCALIB_PERIOD_16SEC (0x00002000U) /*!< If RTCCLK = 32768 Hz, Smooth calibation + period is 16s, else 2exp19 RTCCLK seconds */ +#define RTC_SMOOTHCALIB_PERIOD_8SEC (0x00004000U) /*!< If RTCCLK = 32768 Hz, Smooth calibation + period is 8s, else 2exp18 RTCCLK seconds */ + +#define IS_RTC_SMOOTH_CALIB_PERIOD(PERIOD) (((PERIOD) == RTC_SMOOTHCALIB_PERIOD_32SEC) || \ + ((PERIOD) == RTC_SMOOTHCALIB_PERIOD_16SEC) || \ + ((PERIOD) == RTC_SMOOTHCALIB_PERIOD_8SEC)) +/** + * @} + */ + +/** @defgroup RTCEx_Smooth_Calib_Plus_Pulses_Definitions Smooth Calib Plus Pulses Definitions + * @{ + */ +#define RTC_SMOOTHCALIB_PLUSPULSES_SET (0x00008000U) /*!< The number of RTCCLK pulses added + during a X -second window = Y - CALM[8:0] + with Y = 512, 256, 128 when X = 32, 16, 8 */ +#define RTC_SMOOTHCALIB_PLUSPULSES_RESET (0x00000000U) /*!< The number of RTCCLK pulses subbstited + during a 32-second window = CALM[8:0] */ + +#define IS_RTC_SMOOTH_CALIB_PLUS(PLUS) (((PLUS) == RTC_SMOOTHCALIB_PLUSPULSES_SET) || \ + ((PLUS) == RTC_SMOOTHCALIB_PLUSPULSES_RESET)) +/** + * @} + */ + +/** @defgroup RTCEx_Smooth_Calib_Minus_Pulses_Definitions Smooth Calib Minus Pulses Definitions + * @{ + */ +#define IS_RTC_SMOOTH_CALIB_MINUS(VALUE) ((VALUE) <= 0x000001FFU) +/** + * @} + */ + +/** @defgroup RTCEx_Add_1_Second_Parameter_Definitions Add 1 Second Parameter Definitions + * @{ + */ +#define RTC_SHIFTADD1S_RESET (0x00000000U) +#define RTC_SHIFTADD1S_SET (0x80000000U) + +#define IS_RTC_SHIFT_ADD1S(SEL) (((SEL) == RTC_SHIFTADD1S_RESET) || \ + ((SEL) == RTC_SHIFTADD1S_SET)) +/** + * @} + */ + +/** @defgroup RTCEx_Substract_Fraction_Of_Second_Value Substract Fraction Of Second Value + * @{ + */ +#define IS_RTC_SHIFT_SUBFS(FS) ((FS) <= 0x00007FFFU) +/** + * @} + */ + +/** @defgroup RTCEx_Calib_Output_Selection_Definitions Calib Output Selection Definitions + * @{ + */ +#define RTC_CALIBOUTPUT_512HZ (0x00000000U) +#define RTC_CALIBOUTPUT_1HZ (0x00080000U) + +#define IS_RTC_CALIB_OUTPUT(OUTPUT) (((OUTPUT) == RTC_CALIBOUTPUT_512HZ) || \ + ((OUTPUT) == RTC_CALIBOUTPUT_1HZ)) +/** + * @} + */ + +#if defined(STM32L100xBA) || defined (STM32L151xBA) || defined (STM32L152xBA) || defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) +/** @defgroup RTC_Alarm_Sub_Seconds_Value Alarm Sub Seconds Value + * @{ + */ +#define IS_RTC_ALARM_SUB_SECOND_VALUE(VALUE) ((VALUE) <= 0x00007FFFU) +/** + * @} + */ + +/** @defgroup RTC_Alarm_Sub_Seconds_Masks_Definitions Alarm Sub Seconds Masks Definitions + * @{ + */ +#define RTC_ALARMSUBSECONDMASK_ALL (0x00000000U) /*!< All Alarm SS fields are masked. + There is no comparison on sub seconds + for Alarm */ +#define RTC_ALARMSUBSECONDMASK_SS14_1 (0x01000000U) /*!< SS[14:1] are don't care in Alarm + comparison. Only SS[0] is compared. */ +#define RTC_ALARMSUBSECONDMASK_SS14_2 (0x02000000U) /*!< SS[14:2] are don't care in Alarm + comparison. Only SS[1:0] are compared */ +#define RTC_ALARMSUBSECONDMASK_SS14_3 (0x03000000U) /*!< SS[14:3] are don't care in Alarm + comparison. Only SS[2:0] are compared */ +#define RTC_ALARMSUBSECONDMASK_SS14_4 (0x04000000U) /*!< SS[14:4] are don't care in Alarm + comparison. Only SS[3:0] are compared */ +#define RTC_ALARMSUBSECONDMASK_SS14_5 (0x05000000U) /*!< SS[14:5] are don't care in Alarm + comparison. Only SS[4:0] are compared */ +#define RTC_ALARMSUBSECONDMASK_SS14_6 (0x06000000U) /*!< SS[14:6] are don't care in Alarm + comparison. Only SS[5:0] are compared */ +#define RTC_ALARMSUBSECONDMASK_SS14_7 (0x07000000U) /*!< SS[14:7] are don't care in Alarm + comparison. Only SS[6:0] are compared */ +#define RTC_ALARMSUBSECONDMASK_SS14_8 (0x08000000U) /*!< SS[14:8] are don't care in Alarm + comparison. Only SS[7:0] are compared */ +#define RTC_ALARMSUBSECONDMASK_SS14_9 (0x09000000U) /*!< SS[14:9] are don't care in Alarm + comparison. Only SS[8:0] are compared */ +#define RTC_ALARMSUBSECONDMASK_SS14_10 (0x0A000000U) /*!< SS[14:10] are don't care in Alarm + comparison. Only SS[9:0] are compared */ +#define RTC_ALARMSUBSECONDMASK_SS14_11 (0x0B000000U) /*!< SS[14:11] are don't care in Alarm + comparison. Only SS[10:0] are compared */ +#define RTC_ALARMSUBSECONDMASK_SS14_12 (0x0C000000U) /*!< SS[14:12] are don't care in Alarm + comparison.Only SS[11:0] are compared */ +#define RTC_ALARMSUBSECONDMASK_SS14_13 (0x0D000000U) /*!< SS[14:13] are don't care in Alarm + comparison. Only SS[12:0] are compared */ +#define RTC_ALARMSUBSECONDMASK_SS14 (0x0E000000U) /*!< SS[14] is don't care in Alarm + comparison.Only SS[13:0] are compared */ +#define RTC_ALARMSUBSECONDMASK_NONE (0x0F000000U) /*!< SS[14:0] are compared and must match + to activate alarm. */ + +#define IS_RTC_ALARM_SUB_SECOND_MASK(MASK) (((MASK) == RTC_ALARMSUBSECONDMASK_ALL) || \ + ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_1) || \ + ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_2) || \ + ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_3) || \ + ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_4) || \ + ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_5) || \ + ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_6) || \ + ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_7) || \ + ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_8) || \ + ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_9) || \ + ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_10) || \ + ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_11) || \ + ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_12) || \ + ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_13) || \ + ((MASK) == RTC_ALARMSUBSECONDMASK_SS14) || \ + ((MASK) == RTC_ALARMSUBSECONDMASK_NONE)) +/** + * @} + */ +#endif /* STM32L100xBA || STM32L151xBA || STM32L152xBA || STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup RTCEx_Exported_Macros RTCEx Exported Macros + * @{ + */ + +/** + * @brief Enable the RTC WakeUp Timer peripheral. + * @param __HANDLE__: specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_WAKEUPTIMER_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_WUTE)) + +/** + * @brief Enable the RTC TimeStamp peripheral. + * @param __HANDLE__: specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_TIMESTAMP_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_TSE)) + +/** + * @brief Disable the RTC WakeUp Timer peripheral. + * @param __HANDLE__: specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_WAKEUPTIMER_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_WUTE)) + +/** + * @brief Disable the RTC TimeStamp peripheral. + * @param __HANDLE__: specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_TIMESTAMP_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_TSE)) + +/** + * @brief Enable the Coarse calibration process. + * @param __HANDLE__: specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_COARSE_CALIB_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_DCE)) + +/** + * @brief Disable the Coarse calibration process. + * @param __HANDLE__: specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_COARSE_CALIB_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_DCE)) + +/** + * @brief Enable the RTC calibration output. + * @param __HANDLE__: specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_CALIBRATION_OUTPUT_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_COE)) + +/** + * @brief Disable the calibration output. + * @param __HANDLE__: specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_CALIBRATION_OUTPUT_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_COE)) + +/** + * @brief Enable the clock reference detection. + * @param __HANDLE__: specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_CLOCKREF_DETECTION_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_REFCKON)) + +/** + * @brief Disable the clock reference detection. + * @param __HANDLE__: specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_CLOCKREF_DETECTION_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_REFCKON)) + +/** + * @brief Enable the RTC TimeStamp interrupt. + * @param __HANDLE__: specifies the RTC handle. + * @param __INTERRUPT__: specifies the RTC TimeStamp interrupt sources to be enabled or disabled. + * This parameter can be: + * @arg RTC_IT_TS: TimeStamp interrupt + * @retval None + */ +#define __HAL_RTC_TIMESTAMP_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__)) + +/** + * @brief Enable the RTC WakeUpTimer interrupt. + * @param __HANDLE__: specifies the RTC handle. + * @param __INTERRUPT__: specifies the RTC WakeUpTimer interrupt sources to be enabled or disabled. + * This parameter can be: + * @arg RTC_IT_WUT: WakeUpTimer A interrupt + * @retval None + */ +#define __HAL_RTC_WAKEUPTIMER_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__)) + +/** + * @brief Disable the RTC TimeStamp interrupt. + * @param __HANDLE__: specifies the RTC handle. + * @param __INTERRUPT__: specifies the RTC TimeStamp interrupt sources to be enabled or disabled. + * This parameter can be: + * @arg RTC_IT_TS: TimeStamp interrupt + * @retval None + */ +#define __HAL_RTC_TIMESTAMP_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__)) + +/** + * @brief Disable the RTC WakeUpTimer interrupt. + * @param __HANDLE__: specifies the RTC handle. + * @param __INTERRUPT__: specifies the RTC WakeUpTimer interrupt sources to be enabled or disabled. + * This parameter can be: + * @arg RTC_IT_WUT: WakeUpTimer A interrupt + * @retval None + */ +#define __HAL_RTC_WAKEUPTIMER_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__)) + +/** + * @brief Enable the RTC Tamper1 input detection. + * @param __HANDLE__: specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_TAMPER1_ENABLE(__HANDLE__) SET_BIT((__HANDLE__)->Instance->TAFCR, RTC_TAFCR_TAMP1E) + +/** + * @brief Disable the RTC Tamper1 input detection. + * @param __HANDLE__: specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_TAMPER1_DISABLE(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->TAFCR, RTC_TAFCR_TAMP1E) + +#if defined(STM32L100xBA) || defined (STM32L151xBA) || defined (STM32L152xBA) || defined(STM32L100xC)\ + || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined(STM32L151xCA)\ + || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA)\ + || defined (STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) +/** + * @brief Enable the RTC Tamper2 input detection. + * @param __HANDLE__: specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_TAMPER2_ENABLE(__HANDLE__) SET_BIT((__HANDLE__)->Instance->TAFCR, RTC_TAFCR_TAMP2E) + +/** + * @brief Disable the RTC Tamper2 input detection. + * @param __HANDLE__: specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_TAMPER2_DISABLE(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->TAFCR, RTC_TAFCR_TAMP2E) + +/** + * @brief Enable the RTC Tamper3 input detection. + * @param __HANDLE__: specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_TAMPER3_ENABLE(__HANDLE__) SET_BIT((__HANDLE__)->Instance->TAFCR, RTC_TAFCR_TAMP3E) + +/** + * @brief Disable the RTC Tamper3 input detection. + * @param __HANDLE__: specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_TAMPER3_DISABLE(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->TAFCR, RTC_TAFCR_TAMP3E) + + +/** + * @brief Check whether the specified RTC Tamper interrupt has occurred or not. + * @param __HANDLE__: specifies the RTC handle. + * @param __INTERRUPT__: specifies the RTC Tamper interrupt to check. + * This parameter can be: + * @arg RTC_IT_TAMP1: Tamper1 interrupt + * @arg RTC_IT_TAMP2: Tamper2 interrupt + * @arg RTC_IT_TAMP3: Tamper3 interrupt + * @retval None + */ +#define __HAL_RTC_TAMPER_GET_IT(__HANDLE__, __INTERRUPT__) (((__INTERRUPT__) == RTC_IT_TAMP1) ? (((((__HANDLE__)->Instance->ISR) & RTC_ISR_TAMP1F) != RESET) ? SET : RESET) : \ + ((__INTERRUPT__) == RTC_IT_TAMP2) ? (((((__HANDLE__)->Instance->ISR) & RTC_ISR_TAMP2F) != RESET) ? SET : RESET) : \ + (((((__HANDLE__)->Instance->ISR) & RTC_ISR_TAMP3F) != RESET) ? SET : RESET)) +#else +/** + * @brief Check whether the specified RTC Tamper interrupt has occurred or not. + * @param __HANDLE__: specifies the RTC handle. + * @param __INTERRUPT__: specifies the RTC Tamper interrupt to check. + * This parameter can be: + * @arg RTC_IT_TAMP1: Tamper1 interrupt + * @retval None + */ +#define __HAL_RTC_TAMPER_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->ISR) & RTC_ISR_TAMP1F) != RESET) ? SET : RESET) + +#endif + +/** + * @brief Enable the RTC Tamper interrupt. + * @param __HANDLE__: specifies the RTC handle. + * @param __INTERRUPT__: specifies the RTC Tamper interrupt sources to be enabled + * This parameter can be any combination of the following values: + * @arg RTC_IT_TAMP1: Tamper1 interrupt + * @arg RTC_IT_TAMP2: Tamper2 interrupt (*) + * @arg RTC_IT_TAMP3: Tamper3 interrupt (*) + * @note (*) Available only on devices STM32L100xBA, STM32L151xBA, STM32L152xBA, STM32L100xC, + * STM32L151xC, STM32L152xC, STM32L162xC, STM32L151xCA, STM32L151xD, STM32L152xCA, + * STM32L152xD, STM32L162xCA, STM32L162xD, STM32L151xE, STM32L152xE, STM32L162xE + * STM32L151xDX, STM32L152xDX, STM32L162xDX + * @retval None + */ +#define __HAL_RTC_TAMPER_ENABLE_IT(__HANDLE__, __INTERRUPT__) SET_BIT(((__HANDLE__)->Instance->TAFCR), RTC_TAFCR_TAMPIE) + +/** + * @brief Disable the RTC Tamper interrupt. + * @param __HANDLE__: specifies the RTC handle. + * @param __INTERRUPT__: specifies the RTC Tamper interrupt sources to be disabled. + * This parameter can be any combination of the following values: + * @arg RTC_IT_TAMP1: Tamper1 interrupt + * @arg RTC_IT_TAMP2: Tamper2 interrupt (*) + * @arg RTC_IT_TAMP3: Tamper3 interrupt (*) + * @note (*) Available only on devices STM32L100xBA, STM32L151xBA, STM32L152xBA, STM32L100xC, + * STM32L151xC, STM32L152xC, STM32L162xC, STM32L151xCA, STM32L151xD, STM32L152xCA, + * STM32L152xD, STM32L162xCA, STM32L162xD, STM32L151xE, STM32L152xE, STM32L162xE + * STM32L151xDX, STM32L152xDX, STM32L162xDX + * @retval None + */ +#define __HAL_RTC_TAMPER_DISABLE_IT(__HANDLE__, __INTERRUPT__) CLEAR_BIT(((__HANDLE__)->Instance->TAFCR), RTC_TAFCR_TAMPIE) + +/** + * @brief Check whether the specified RTC Tamper interrupt has been enabled or not. + * @param __HANDLE__: specifies the RTC handle. + * @param __INTERRUPT__: specifies the RTC Tamper interrupt source to check. + * This parameter can be: + * @arg RTC_IT_TAMP1: Tamper1 interrupt + * @arg RTC_IT_TAMP2: Tamper2 interrupt (*) + * @arg RTC_IT_TAMP3: Tamper3 interrupt (*) + * @note (*) Available only on devices STM32L100xBA, STM32L151xBA, STM32L152xBA, STM32L100xC, + * STM32L151xC, STM32L152xC, STM32L162xC, STM32L151xCA, STM32L151xD, STM32L152xCA, + * STM32L152xD, STM32L162xCA, STM32L162xD, STM32L151xE, STM32L152xE, STM32L162xE + * STM32L151xDX, STM32L152xDX, STM32L162xDX + * @retval None + */ +#define __HAL_RTC_TAMPER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->TAFCR) & RTC_TAFCR_TAMPIE) != RESET) ? SET : RESET) + +/** + * @brief Check whether the specified RTC WakeUpTimer interrupt has occurred or not. + * @param __HANDLE__: specifies the RTC handle. + * @param __FLAG__: specifies the RTC WakeUpTimer interrupt sources to be enabled or disabled. + * This parameter can be: + * @arg RTC_IT_WUT: WakeUpTimer A interrupt + * @retval None + */ +#define __HAL_RTC_WAKEUPTIMER_GET_IT(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & ((__FLAG__)>> 4)) != RESET)? SET : RESET) + +/** + * @brief Check whether the specified RTC Wake Up timer interrupt has been enabled or not. + * @param __HANDLE__: specifies the RTC handle. + * @param __INTERRUPT__: specifies the RTC Wake Up timer interrupt sources to check. + * This parameter can be: + * @arg RTC_IT_WUT: WakeUpTimer interrupt + * @retval None + */ +#define __HAL_RTC_WAKEUPTIMER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->CR) & (__INTERRUPT__)) != RESET) ? SET : RESET) + +/** + * @brief Check whether the specified RTC TimeStamp interrupt has occurred or not. + * @param __HANDLE__: specifies the RTC handle. + * @param __INTERRUPT__: specifies the RTC TimeStamp interrupt sources to be enabled or disabled. + * This parameter can be: + * @arg RTC_IT_TS: TimeStamp interrupt + * @retval None + */ +#define __HAL_RTC_TIMESTAMP_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 4)) != RESET)? SET : RESET) + +/** + * @brief Check whether the specified RTC Time Stamp interrupt has been enabled or not. + * @param __HANDLE__: specifies the RTC handle. + * @param __INTERRUPT__: specifies the RTC Time Stamp interrupt source to check. + * This parameter can be: + * @arg RTC_IT_TS: TimeStamp interrupt + * @retval None + */ +#define __HAL_RTC_TIMESTAMP_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->CR) & (__INTERRUPT__)) != RESET) ? SET : RESET) + +/** + * @brief Get the selected RTC TimeStamp's flag status. + * @param __HANDLE__: specifies the RTC handle. + * @param __FLAG__: specifies the RTC TimeStamp Flag sources to be enabled or disabled. + * This parameter can be: + * @arg RTC_FLAG_TSF + * @arg RTC_FLAG_TSOVF + * @retval None + */ +#define __HAL_RTC_TIMESTAMP_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET) + +/** + * @brief Get the selected RTC WakeUpTimer's flag status. + * @param __HANDLE__: specifies the RTC handle. + * @param __FLAG__: specifies the RTC WakeUpTimer Flag sources to be enabled or disabled. + * This parameter can be: + * @arg RTC_FLAG_WUTF + * @arg RTC_FLAG_WUTWF + * @retval None + */ +#define __HAL_RTC_WAKEUPTIMER_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET) + +/** + * @brief Get the selected RTC Tamper's flag status. + * @param __HANDLE__: specifies the RTC handle. + * @param __FLAG__: specifies the RTC Tamper Flag sources to be enabled or disabled. + * This parameter can be: + * @arg RTC_FLAG_TAMP1F + * @arg RTC_FLAG_TAMP2F (*) + * @arg RTC_FLAG_TAMP3F (*) + * @note (*) Available only on devices STM32L100xBA, STM32L151xBA, STM32L152xBA, STM32L100xC, + * STM32L151xC, STM32L152xC, STM32L162xC, STM32L151xCA, STM32L151xD, STM32L152xCA, + * STM32L152xD, STM32L162xCA, STM32L162xD, STM32L151xE, STM32L152xE, STM32L162xE + * STM32L151xDX, STM32L152xDX, STM32L162xDX + * @retval None + */ +#define __HAL_RTC_TAMPER_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET) + +#if defined(STM32L100xBA) || defined (STM32L151xBA) || defined (STM32L152xBA) || defined(STM32L100xC)\ + || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined(STM32L151xCA)\ + || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA)\ + || defined (STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) +/** + * @brief Get the selected RTC shift operation's flag status. + * @param __HANDLE__: specifies the RTC handle. + * @param __FLAG__: specifies the RTC shift operation Flag is pending or not. + * This parameter can be: + * @arg RTC_FLAG_SHPF + * @retval None + */ +#define __HAL_RTC_SHIFT_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET) +#endif /* STM32L100xBA || STM32L151xBA || STM32L152xBA || STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ + +/** + * @brief Clear the RTC Time Stamp's pending flags. + * @param __HANDLE__: specifies the RTC handle. + * @param __FLAG__: specifies the RTC Alarm Flag sources to be enabled or disabled. + * This parameter can be: + * @arg RTC_FLAG_TSF + * @retval None + */ +#define __HAL_RTC_TIMESTAMP_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT)) + +/** + * @brief Clear the RTC Tamper's pending flags. + * @param __HANDLE__: specifies the RTC handle. + * @param __FLAG__: specifies the RTC Tamper Flag sources to be enabled or disabled. + * This parameter can be: + * @arg RTC_FLAG_TAMP1F + * @arg RTC_FLAG_TAMP2F (*) + * @arg RTC_FLAG_TAMP3F (*) + * @note (*) Available only on devices STM32L100xBA, STM32L151xBA, STM32L152xBA, STM32L100xC, + * STM32L151xC, STM32L152xC, STM32L162xC, STM32L151xCA, STM32L151xD, STM32L152xCA, + * STM32L152xD, STM32L162xCA, STM32L162xD, STM32L151xE, STM32L152xE, STM32L162xE + * STM32L151xDX, STM32L152xDX, STM32L162xDX + * @retval None + */ +#define __HAL_RTC_TAMPER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT)) + +/** + * @brief Clear the RTC Wake Up timer's pending flags. + * @param __HANDLE__: specifies the RTC handle. + * @param __FLAG__: specifies the RTC WakeUpTimer Flag to clear. + * This parameter can be: + * @arg RTC_FLAG_WUTF + * @retval None + */ +#define __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT)) + +/** + * @brief Enable interrupt on the RTC WakeUp Timer associated Exti line. + * @retval None + */ +#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT() (EXTI->IMR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT) + +/** + * @brief Disable interrupt on the RTC WakeUp Timer associated Exti line. + * @retval None + */ +#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_IT() (EXTI->IMR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT)) + +/** + * @brief Enable event on the RTC WakeUp Timer associated Exti line. + * @retval None. + */ +#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_EVENT() (EXTI->EMR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT) + +/** + * @brief Disable event on the RTC WakeUp Timer associated Exti line. + * @retval None. + */ +#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_EVENT() (EXTI->EMR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT)) + +/** + * @brief Enable falling edge trigger on the RTC WakeUp Timer associated Exti line. + * @retval None. + */ +#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_FALLING_EDGE() (EXTI->FTSR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT) + +/** + * @brief Disable falling edge trigger on the RTC WakeUp Timer associated Exti line. + * @retval None. + */ +#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_FALLING_EDGE() (EXTI->FTSR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT)) + +/** + * @brief Enable rising edge trigger on the RTC WakeUp Timer associated Exti line. + * @retval None. + */ +#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE() (EXTI->RTSR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT) + +/** + * @brief Disable rising edge trigger on the RTC WakeUp Timer associated Exti line. + * @retval None. + */ +#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_EDGE() (EXTI->RTSR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT)) + +/** + * @brief Enable rising & falling edge trigger on the RTC WakeUp Timer associated Exti line. + * @retval None. + */ +#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_FALLING_EDGE() do { __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE();__HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_FALLING_EDGE(); } while(0); + +/** + * @brief Disable rising & falling edge trigger on the RTC WakeUp Timer associated Exti line. + * This parameter can be: + * @retval None. + */ +#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_FALLING_EDGE() do { __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_EDGE();__HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_FALLING_EDGE(); } while(0); + +/** + * @brief Check whether the RTC WakeUp Timer associated Exti line interrupt flag is set or not. + * @retval Line Status. + */ +#define __HAL_RTC_WAKEUPTIMER_EXTI_GET_FLAG() (EXTI->PR & RTC_EXTI_LINE_WAKEUPTIMER_EVENT) + +/** + * @brief Clear the RTC WakeUp Timer associated Exti line flag. + * @retval None. + */ +#define __HAL_RTC_WAKEUPTIMER_EXTI_CLEAR_FLAG() (EXTI->PR = RTC_EXTI_LINE_WAKEUPTIMER_EVENT) + +/** + * @brief Generate a Software interrupt on the RTC WakeUp Timer associated Exti line. + * @retval None. + */ +#define __HAL_RTC_WAKEUPTIMER_EXTI_GENERATE_SWIT() (EXTI->SWIER |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT) + +/** + * @brief Enable interrupt on the RTC Tamper and Timestamp associated Exti line. + * @retval None + */ +#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT() (EXTI->IMR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT) + +/** + * @brief Disable interrupt on the RTC Tamper and Timestamp associated Exti line. + * @retval None + */ +#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_IT() (EXTI->IMR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)) + +/** + * @brief Enable event on the RTC Tamper and Timestamp associated Exti line. + * @retval None. + */ +#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_EVENT() (EXTI->EMR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT) + +/** + * @brief Disable event on the RTC Tamper and Timestamp associated Exti line. + * @retval None. + */ +#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_EVENT() (EXTI->EMR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)) + +/** + * @brief Enable falling edge trigger on the RTC Tamper and Timestamp associated Exti line. + * @retval None. + */ +#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_FALLING_EDGE() (EXTI->FTSR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT) + +/** + * @brief Disable falling edge trigger on the RTC Tamper and Timestamp associated Exti line. + * @retval None. + */ +#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_FALLING_EDGE() (EXTI->FTSR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)) + +/** + * @brief Enable rising edge trigger on the RTC Tamper and Timestamp associated Exti line. + * @retval None. + */ +#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_EDGE() (EXTI->RTSR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT) + +/** + * @brief Disable rising edge trigger on the RTC Tamper and Timestamp associated Exti line. + * @retval None. + */ +#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_EDGE() (EXTI->RTSR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)) + +/** + * @brief Enable rising & falling edge trigger on the RTC Tamper and Timestamp associated Exti line. + * @retval None. + */ +#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_FALLING_EDGE() do { __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_EDGE();__HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_FALLING_EDGE(); } while(0); + +/** + * @brief Disable rising & falling edge trigger on the RTC Tamper and Timestamp associated Exti line. + * This parameter can be: + * @retval None. + */ +#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_FALLING_EDGE() do { __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_EDGE();__HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_FALLING_EDGE(); } while(0); + +/** + * @brief Check whether the RTC Tamper and Timestamp associated Exti line interrupt flag is set or not. + * @retval Line Status. + */ +#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GET_FLAG() (EXTI->PR & RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT) + +/** + * @brief Clear the RTC Tamper and Timestamp associated Exti line flag. + * @retval None. + */ +#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_CLEAR_FLAG() (EXTI->PR = RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT) + +/** + * @brief Generate a Software interrupt on the RTC Tamper and Timestamp associated Exti line + * @retval None. + */ +#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GENERATE_SWIT() (EXTI->SWIER |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT) + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup RTCEx_Exported_Functions + * @{ + */ + +/* RTC TimeStamp and Tamper functions *****************************************/ +/** @addtogroup RTCEx_Exported_Functions_Group4 + * @{ + */ +HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge); +HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp_IT(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge); +HAL_StatusTypeDef HAL_RTCEx_DeactivateTimeStamp(RTC_HandleTypeDef *hrtc); +HAL_StatusTypeDef HAL_RTCEx_GetTimeStamp(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTimeStamp, RTC_DateTypeDef *sTimeStampDate, uint32_t Format); + +HAL_StatusTypeDef HAL_RTCEx_SetTamper(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef* sTamper); +HAL_StatusTypeDef HAL_RTCEx_SetTamper_IT(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef* sTamper); +HAL_StatusTypeDef HAL_RTCEx_DeactivateTamper(RTC_HandleTypeDef *hrtc, uint32_t Tamper); +void HAL_RTCEx_TamperTimeStampIRQHandler(RTC_HandleTypeDef *hrtc); + +void HAL_RTCEx_Tamper1EventCallback(RTC_HandleTypeDef *hrtc); +#if defined(STM32L100xBA) || defined (STM32L151xBA) || defined (STM32L152xBA) || defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) +void HAL_RTCEx_Tamper2EventCallback(RTC_HandleTypeDef *hrtc); +void HAL_RTCEx_Tamper3EventCallback(RTC_HandleTypeDef *hrtc); +#endif /* STM32L100xBA || STM32L151xBA || STM32L152xBA || STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ +void HAL_RTCEx_TimeStampEventCallback(RTC_HandleTypeDef *hrtc); +HAL_StatusTypeDef HAL_RTCEx_PollForTimeStampEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout); +HAL_StatusTypeDef HAL_RTCEx_PollForTamper1Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout); +#if defined(STM32L100xBA) || defined (STM32L151xBA) || defined (STM32L152xBA) || defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) +HAL_StatusTypeDef HAL_RTCEx_PollForTamper2Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout); +HAL_StatusTypeDef HAL_RTCEx_PollForTamper3Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout); +#endif /* STM32L100xBA || STM32L151xBA || STM32L152xBA || STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ +/** + * @} + */ + +/* RTC Wake-up functions ******************************************************/ +/** @addtogroup RTCEx_Exported_Functions_Group5 + * @{ + */ +HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock); +HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer_IT(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock); +uint32_t HAL_RTCEx_DeactivateWakeUpTimer(RTC_HandleTypeDef *hrtc); +uint32_t HAL_RTCEx_GetWakeUpTimer(RTC_HandleTypeDef *hrtc); +void HAL_RTCEx_WakeUpTimerIRQHandler(RTC_HandleTypeDef *hrtc); +void HAL_RTCEx_WakeUpTimerEventCallback(RTC_HandleTypeDef *hrtc); +HAL_StatusTypeDef HAL_RTCEx_PollForWakeUpTimerEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout); +/** + * @} + */ + +/* Extension Control functions ************************************************/ +/** @addtogroup RTCEx_Exported_Functions_Group7 + * @{ + */ +void HAL_RTCEx_BKUPWrite(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister, uint32_t Data); +uint32_t HAL_RTCEx_BKUPRead(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister); + +HAL_StatusTypeDef HAL_RTCEx_SetCoarseCalib(RTC_HandleTypeDef *hrtc, uint32_t CalibSign, uint32_t Value); +HAL_StatusTypeDef HAL_RTCEx_DeactivateCoarseCalib(RTC_HandleTypeDef *hrtc); +#if defined(STM32L100xBA) || defined (STM32L151xBA) || defined (STM32L152xBA) || defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) +HAL_StatusTypeDef HAL_RTCEx_SetSmoothCalib(RTC_HandleTypeDef *hrtc, uint32_t SmoothCalibPeriod, uint32_t SmoothCalibPlusPulses, uint32_t SmoothCalibMinusPulsesValue); +HAL_StatusTypeDef HAL_RTCEx_SetSynchroShift(RTC_HandleTypeDef *hrtc, uint32_t ShiftAdd1S, uint32_t ShiftSubFS); +HAL_StatusTypeDef HAL_RTCEx_SetCalibrationOutPut(RTC_HandleTypeDef *hrtc, uint32_t CalibOutput); +#else +HAL_StatusTypeDef HAL_RTCEx_SetCalibrationOutPut(RTC_HandleTypeDef *hrtc); +#endif /* STM32L100xBA || STM32L151xBA || STM32L152xBA || STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ +HAL_StatusTypeDef HAL_RTCEx_DeactivateCalibrationOutPut(RTC_HandleTypeDef *hrtc); +HAL_StatusTypeDef HAL_RTCEx_SetRefClock(RTC_HandleTypeDef *hrtc); +HAL_StatusTypeDef HAL_RTCEx_DeactivateRefClock(RTC_HandleTypeDef *hrtc); +HAL_StatusTypeDef HAL_RTCEx_EnableBypassShadow(RTC_HandleTypeDef *hrtc); +HAL_StatusTypeDef HAL_RTCEx_DisableBypassShadow(RTC_HandleTypeDef *hrtc); +/** + * @} + */ + +/* Extension RTC features functions *******************************************/ +/** @addtogroup RTCEx_Exported_Functions_Group8 + * @{ + */ +void HAL_RTCEx_AlarmBEventCallback(RTC_HandleTypeDef *hrtc); +HAL_StatusTypeDef HAL_RTCEx_PollForAlarmBEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout); +/** + * @} + */ + +/** + * @} + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @defgroup RTCEx_Private_Constants RTCEx Private Constants + * @{ + */ +#define RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT (0x00080000U) /*!< External interrupt line 19 Connected to the RTC Tamper and Time Stamp events */ +#define RTC_EXTI_LINE_WAKEUPTIMER_EVENT (0x00100000U) /*!< External interrupt line 20 Connected to the RTC Wakeup event */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup RTCEx_Private_Macros RTCEx Private Macros + * @{ + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32L1xx_HAL_RTC_EX_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_sd.h b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_sd.h new file mode 100755 index 0000000..bf7d7ab --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_sd.h @@ -0,0 +1,796 @@ +/** + ****************************************************************************** + * @file stm32l1xx_hal_sd.h + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief Header file of SD HAL module. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L1xx_HAL_SD_H +#define __STM32L1xx_HAL_SD_H + +#if defined(STM32L151xD) || defined(STM32L152xD) || defined(STM32L162xD) + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_ll_sdmmc.h" + +/** @addtogroup STM32L1xx_HAL_Driver + * @{ + */ + +/** @defgroup SD SD + * @brief SD HAL module driver + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup SD_Exported_Types SD Exported Types + * @{ + */ + +/** @defgroup SD_Exported_Types_Group1 SD Handle Structure definition + * @{ + */ +#define SD_InitTypeDef SDIO_InitTypeDef +#define SD_TypeDef SDIO_TypeDef + +/** + * @brief SDIO Handle Structure definition + */ +typedef struct +{ + SD_TypeDef *Instance; /*!< SDIO register base address */ + + SD_InitTypeDef Init; /*!< SD required parameters */ + + HAL_LockTypeDef Lock; /*!< SD locking object */ + + uint32_t CardType; /*!< SD card type */ + + uint32_t RCA; /*!< SD relative card address */ + + uint32_t CSD[4]; /*!< SD card specific data table */ + + uint32_t CID[4]; /*!< SD card identification number table */ + + __IO uint32_t SdTransferCplt; /*!< SD transfer complete flag in non blocking mode */ + + __IO uint32_t SdTransferErr; /*!< SD transfer error flag in non blocking mode */ + + __IO uint32_t DmaTransferCplt; /*!< SD DMA transfer complete flag */ + + __IO uint32_t SdOperation; /*!< SD transfer operation (read/write) */ + + DMA_HandleTypeDef *hdmarx; /*!< SD Rx DMA handle parameters */ + + DMA_HandleTypeDef *hdmatx; /*!< SD Tx DMA handle parameters */ + +}SD_HandleTypeDef; +/** + * @} + */ + +/** @defgroup SD_Exported_Types_Group2 Card Specific Data: CSD Register + * @{ + */ +typedef struct +{ + __IO uint8_t CSDStruct; /*!< CSD structure */ + __IO uint8_t SysSpecVersion; /*!< System specification version */ + __IO uint8_t Reserved1; /*!< Reserved */ + __IO uint8_t TAAC; /*!< Data read access time 1 */ + __IO uint8_t NSAC; /*!< Data read access time 2 in CLK cycles */ + __IO uint8_t MaxBusClkFrec; /*!< Max. bus clock frequency */ + __IO uint16_t CardComdClasses; /*!< Card command classes */ + __IO uint8_t RdBlockLen; /*!< Max. read data block length */ + __IO uint8_t PartBlockRead; /*!< Partial blocks for read allowed */ + __IO uint8_t WrBlockMisalign; /*!< Write block misalignment */ + __IO uint8_t RdBlockMisalign; /*!< Read block misalignment */ + __IO uint8_t DSRImpl; /*!< DSR implemented */ + __IO uint8_t Reserved2; /*!< Reserved */ + __IO uint32_t DeviceSize; /*!< Device Size */ + __IO uint8_t MaxRdCurrentVDDMin; /*!< Max. read current @ VDD min */ + __IO uint8_t MaxRdCurrentVDDMax; /*!< Max. read current @ VDD max */ + __IO uint8_t MaxWrCurrentVDDMin; /*!< Max. write current @ VDD min */ + __IO uint8_t MaxWrCurrentVDDMax; /*!< Max. write current @ VDD max */ + __IO uint8_t DeviceSizeMul; /*!< Device size multiplier */ + __IO uint8_t EraseGrSize; /*!< Erase group size */ + __IO uint8_t EraseGrMul; /*!< Erase group size multiplier */ + __IO uint8_t WrProtectGrSize; /*!< Write protect group size */ + __IO uint8_t WrProtectGrEnable; /*!< Write protect group enable */ + __IO uint8_t ManDeflECC; /*!< Manufacturer default ECC */ + __IO uint8_t WrSpeedFact; /*!< Write speed factor */ + __IO uint8_t MaxWrBlockLen; /*!< Max. write data block length */ + __IO uint8_t WriteBlockPaPartial; /*!< Partial blocks for write allowed */ + __IO uint8_t Reserved3; /*!< Reserved */ + __IO uint8_t ContentProtectAppli; /*!< Content protection application */ + __IO uint8_t FileFormatGrouop; /*!< File format group */ + __IO uint8_t CopyFlag; /*!< Copy flag (OTP) */ + __IO uint8_t PermWrProtect; /*!< Permanent write protection */ + __IO uint8_t TempWrProtect; /*!< Temporary write protection */ + __IO uint8_t FileFormat; /*!< File format */ + __IO uint8_t ECC; /*!< ECC code */ + __IO uint8_t CSD_CRC; /*!< CSD CRC */ + __IO uint8_t Reserved4; /*!< Always 1 */ + +}HAL_SD_CSDTypedef; +/** + * @} + */ + +/** @defgroup SD_Exported_Types_Group3 Card Identification Data: CID Register + * @{ + */ +typedef struct +{ + __IO uint8_t ManufacturerID; /*!< Manufacturer ID */ + __IO uint16_t OEM_AppliID; /*!< OEM/Application ID */ + __IO uint32_t ProdName1; /*!< Product Name part1 */ + __IO uint8_t ProdName2; /*!< Product Name part2 */ + __IO uint8_t ProdRev; /*!< Product Revision */ + __IO uint32_t ProdSN; /*!< Product Serial Number */ + __IO uint8_t Reserved1; /*!< Reserved1 */ + __IO uint16_t ManufactDate; /*!< Manufacturing Date */ + __IO uint8_t CID_CRC; /*!< CID CRC */ + __IO uint8_t Reserved2; /*!< Always 1 */ + +}HAL_SD_CIDTypedef; +/** + * @} + */ + +/** @defgroup SD_Exported_Types_Group4 SD Card Status returned by ACMD13 + * @{ + */ +typedef struct +{ + __IO uint8_t DAT_BUS_WIDTH; /*!< Shows the currently defined data bus width */ + __IO uint8_t SECURED_MODE; /*!< Card is in secured mode of operation */ + __IO uint16_t SD_CARD_TYPE; /*!< Carries information about card type */ + __IO uint32_t SIZE_OF_PROTECTED_AREA; /*!< Carries information about the capacity of protected area */ + __IO uint8_t SPEED_CLASS; /*!< Carries information about the speed class of the card */ + __IO uint8_t PERFORMANCE_MOVE; /*!< Carries information about the card's performance move */ + __IO uint8_t AU_SIZE; /*!< Carries information about the card's allocation unit size */ + __IO uint16_t ERASE_SIZE; /*!< Determines the number of AUs to be erased in one operation */ + __IO uint8_t ERASE_TIMEOUT; /*!< Determines the timeout for any number of AU erase */ + __IO uint8_t ERASE_OFFSET; /*!< Carries information about the erase offset */ + +}HAL_SD_CardStatusTypedef; +/** + * @} + */ + +/** @defgroup SD_Exported_Types_Group5 SD Card information structure + * @{ + */ +typedef struct +{ + HAL_SD_CSDTypedef SD_csd; /*!< SD card specific data register */ + HAL_SD_CIDTypedef SD_cid; /*!< SD card identification number register */ + uint64_t CardCapacity; /*!< Card capacity */ + uint32_t CardBlockSize; /*!< Card block size */ + uint16_t RCA; /*!< SD relative card address */ + uint8_t CardType; /*!< SD card type */ + +}HAL_SD_CardInfoTypedef; +/** + * @} + */ + +/** @defgroup SD_Exported_Types_Group6 SD Error status enumeration Structure definition + * @{ + */ +typedef enum +{ +/** + * @brief SD specific error defines + */ + SD_CMD_CRC_FAIL = (1), /*!< Command response received (but CRC check failed) */ + SD_DATA_CRC_FAIL = (2), /*!< Data block sent/received (CRC check failed) */ + SD_CMD_RSP_TIMEOUT = (3), /*!< Command response timeout */ + SD_DATA_TIMEOUT = (4), /*!< Data timeout */ + SD_TX_UNDERRUN = (5), /*!< Transmit FIFO underrun */ + SD_RX_OVERRUN = (6), /*!< Receive FIFO overrun */ + SD_START_BIT_ERR = (7), /*!< Start bit not detected on all data signals in wide bus mode */ + SD_CMD_OUT_OF_RANGE = (8), /*!< Command's argument was out of range. */ + SD_ADDR_MISALIGNED = (9), /*!< Misaligned address */ + SD_BLOCK_LEN_ERR = (10), /*!< Transferred block length is not allowed for the card or the number of transferred bytes does not match the block length */ + SD_ERASE_SEQ_ERR = (11), /*!< An error in the sequence of erase command occurs. */ + SD_BAD_ERASE_PARAM = (12), /*!< An invalid selection for erase groups */ + SD_WRITE_PROT_VIOLATION = (13), /*!< Attempt to program a write protect block */ + SD_LOCK_UNLOCK_FAILED = (14), /*!< Sequence or password error has been detected in unlock command or if there was an attempt to access a locked card */ + SD_COM_CRC_FAILED = (15), /*!< CRC check of the previous command failed */ + SD_ILLEGAL_CMD = (16), /*!< Command is not legal for the card state */ + SD_CARD_ECC_FAILED = (17), /*!< Card internal ECC was applied but failed to correct the data */ + SD_CC_ERROR = (18), /*!< Internal card controller error */ + SD_GENERAL_UNKNOWN_ERROR = (19), /*!< General or unknown error */ + SD_STREAM_READ_UNDERRUN = (20), /*!< The card could not sustain data transfer in stream read operation. */ + SD_STREAM_WRITE_OVERRUN = (21), /*!< The card could not sustain data programming in stream mode */ + SD_CID_CSD_OVERWRITE = (22), /*!< CID/CSD overwrite error */ + SD_WP_ERASE_SKIP = (23), /*!< Only partial address space was erased */ + SD_CARD_ECC_DISABLED = (24), /*!< Command has been executed without using internal ECC */ + SD_ERASE_RESET = (25), /*!< Erase sequence was cleared before executing because an out of erase sequence command was received */ + SD_AKE_SEQ_ERROR = (26), /*!< Error in sequence of authentication. */ + SD_INVALID_VOLTRANGE = (27), + SD_ADDR_OUT_OF_RANGE = (28), + SD_SWITCH_ERROR = (29), + SD_SDIO_DISABLED = (30), + SD_SDIO_FUNCTION_BUSY = (31), + SD_SDIO_FUNCTION_FAILED = (32), + SD_SDIO_UNKNOWN_FUNCTION = (33), + +/** + * @brief Standard error defines + */ + SD_INTERNAL_ERROR = (34), + SD_NOT_CONFIGURED = (35), + SD_REQUEST_PENDING = (36), + SD_REQUEST_NOT_APPLICABLE = (37), + SD_INVALID_PARAMETER = (38), + SD_UNSUPPORTED_FEATURE = (39), + SD_UNSUPPORTED_HW = (40), + SD_ERROR = (41), + SD_OK = (0) + +}HAL_SD_ErrorTypedef; +/** + * @} + */ + +/** @defgroup SD_Exported_Types_Group7 SD Transfer state enumeration structure + * @{ + */ +typedef enum +{ + SD_TRANSFER_OK = 0, /*!< Transfer success */ + SD_TRANSFER_BUSY = 1, /*!< Transfer is occurring */ + SD_TRANSFER_ERROR = 2 /*!< Transfer failed */ + +}HAL_SD_TransferStateTypedef; +/** + * @} + */ + +/** @defgroup SD_Exported_Types_Group8 SD Card State enumeration structure + * @{ + */ +typedef enum +{ + SD_CARD_READY = ((uint32_t)0x00000001), /*!< Card state is ready */ + SD_CARD_IDENTIFICATION = ((uint32_t)0x00000002), /*!< Card is in identification state */ + SD_CARD_STANDBY = ((uint32_t)0x00000003), /*!< Card is in standby state */ + SD_CARD_TRANSFER = ((uint32_t)0x00000004), /*!< Card is in transfer state */ + SD_CARD_SENDING = ((uint32_t)0x00000005), /*!< Card is sending an operation */ + SD_CARD_RECEIVING = ((uint32_t)0x00000006), /*!< Card is receiving operation information */ + SD_CARD_PROGRAMMING = ((uint32_t)0x00000007), /*!< Card is in programming state */ + SD_CARD_DISCONNECTED = ((uint32_t)0x00000008), /*!< Card is disconnected */ + SD_CARD_ERROR = ((uint32_t)0x000000FF) /*!< Card is in error state */ + +}HAL_SD_CardStateTypedef; +/** + * @} + */ + +/** @defgroup SD_Exported_Types_Group9 SD Operation enumeration structure + * @{ + */ +typedef enum +{ + SD_READ_SINGLE_BLOCK = 0, /*!< Read single block operation */ + SD_READ_MULTIPLE_BLOCK = 1, /*!< Read multiple blocks operation */ + SD_WRITE_SINGLE_BLOCK = 2, /*!< Write single block operation */ + SD_WRITE_MULTIPLE_BLOCK = 3 /*!< Write multiple blocks operation */ + +}HAL_SD_OperationTypedef; +/** + * @} + */ + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup SD_Exported_Constants SD Exported Constants + * @{ + */ + +/** + * @brief SD Commands Index + */ +#define SD_CMD_GO_IDLE_STATE ((uint8_t)0) /*!< Resets the SD memory card. */ +#define SD_CMD_SEND_OP_COND ((uint8_t)1) /*!< Sends host capacity support information and activates the card's initialization process. */ +#define SD_CMD_ALL_SEND_CID ((uint8_t)2) /*!< Asks any card connected to the host to send the CID numbers on the CMD line. */ +#define SD_CMD_SET_REL_ADDR ((uint8_t)3) /*!< Asks the card to publish a new relative address (RCA). */ +#define SD_CMD_SET_DSR ((uint8_t)4) /*!< Programs the DSR of all cards. */ +#define SD_CMD_SDIO_SEN_OP_COND ((uint8_t)5) /*!< Sends host capacity support information (HCS) and asks the accessed card to send its + operating condition register (OCR) content in the response on the CMD line. */ +#define SD_CMD_HS_SWITCH ((uint8_t)6) /*!< Checks switchable function (mode 0) and switch card function (mode 1). */ +#define SD_CMD_SEL_DESEL_CARD ((uint8_t)7) /*!< Selects the card by its own relative address and gets deselected by any other address */ +#define SD_CMD_HS_SEND_EXT_CSD ((uint8_t)8) /*!< Sends SD Memory Card interface condition, which includes host supply voltage information + and asks the card whether card supports voltage. */ +#define SD_CMD_SEND_CSD ((uint8_t)9) /*!< Addressed card sends its card specific data (CSD) on the CMD line. */ +#define SD_CMD_SEND_CID ((uint8_t)10) /*!< Addressed card sends its card identification (CID) on the CMD line. */ +#define SD_CMD_READ_DAT_UNTIL_STOP ((uint8_t)11) /*!< SD card doesn't support it. */ +#define SD_CMD_STOP_TRANSMISSION ((uint8_t)12) /*!< Forces the card to stop transmission. */ +#define SD_CMD_SEND_STATUS ((uint8_t)13) /*!< Addressed card sends its status register. */ +#define SD_CMD_HS_BUSTEST_READ ((uint8_t)14) +#define SD_CMD_GO_INACTIVE_STATE ((uint8_t)15) /*!< Sends an addressed card into the inactive state. */ +#define SD_CMD_SET_BLOCKLEN ((uint8_t)16) /*!< Sets the block length (in bytes for SDSC) for all following block commands + (read, write, lock). Default block length is fixed to 512 Bytes. Not effective + for SDHS and SDXC. */ +#define SD_CMD_READ_SINGLE_BLOCK ((uint8_t)17) /*!< Reads single block of size selected by SET_BLOCKLEN in case of SDSC, and a block of + fixed 512 bytes in case of SDHC and SDXC. */ +#define SD_CMD_READ_MULT_BLOCK ((uint8_t)18) /*!< Continuously transfers data blocks from card to host until interrupted by + STOP_TRANSMISSION command. */ +#define SD_CMD_HS_BUSTEST_WRITE ((uint8_t)19) /*!< 64 bytes tuning pattern is sent for SDR50 and SDR104. */ +#define SD_CMD_WRITE_DAT_UNTIL_STOP ((uint8_t)20) /*!< Speed class control command. */ +#define SD_CMD_SET_BLOCK_COUNT ((uint8_t)23) /*!< Specify block count for CMD18 and CMD25. */ +#define SD_CMD_WRITE_SINGLE_BLOCK ((uint8_t)24) /*!< Writes single block of size selected by SET_BLOCKLEN in case of SDSC, and a block of + fixed 512 bytes in case of SDHC and SDXC. */ +#define SD_CMD_WRITE_MULT_BLOCK ((uint8_t)25) /*!< Continuously writes blocks of data until a STOP_TRANSMISSION follows. */ +#define SD_CMD_PROG_CID ((uint8_t)26) /*!< Reserved for manufacturers. */ +#define SD_CMD_PROG_CSD ((uint8_t)27) /*!< Programming of the programmable bits of the CSD. */ +#define SD_CMD_SET_WRITE_PROT ((uint8_t)28) /*!< Sets the write protection bit of the addressed group. */ +#define SD_CMD_CLR_WRITE_PROT ((uint8_t)29) /*!< Clears the write protection bit of the addressed group. */ +#define SD_CMD_SEND_WRITE_PROT ((uint8_t)30) /*!< Asks the card to send the status of the write protection bits. */ +#define SD_CMD_SD_ERASE_GRP_START ((uint8_t)32) /*!< Sets the address of the first write block to be erased. (For SD card only). */ +#define SD_CMD_SD_ERASE_GRP_END ((uint8_t)33) /*!< Sets the address of the last write block of the continuous range to be erased. */ +#define SD_CMD_ERASE_GRP_START ((uint8_t)35) /*!< Sets the address of the first write block to be erased. Reserved for each command + system set by switch function command (CMD6). */ +#define SD_CMD_ERASE_GRP_END ((uint8_t)36) /*!< Sets the address of the last write block of the continuous range to be erased. + Reserved for each command system set by switch function command (CMD6). */ +#define SD_CMD_ERASE ((uint8_t)38) /*!< Reserved for SD security applications. */ +#define SD_CMD_FAST_IO ((uint8_t)39) /*!< SD card doesn't support it (Reserved). */ +#define SD_CMD_GO_IRQ_STATE ((uint8_t)40) /*!< SD card doesn't support it (Reserved). */ +#define SD_CMD_LOCK_UNLOCK ((uint8_t)42) /*!< Sets/resets the password or lock/unlock the card. The size of the data block is set by + the SET_BLOCK_LEN command. */ +#define SD_CMD_APP_CMD ((uint8_t)55) /*!< Indicates to the card that the next command is an application specific command rather + than a standard command. */ +#define SD_CMD_GEN_CMD ((uint8_t)56) /*!< Used either to transfer a data block to the card or to get a data block from the card + for general purpose/application specific commands. */ +#define SD_CMD_NO_CMD ((uint8_t)64) + +/** + * @brief Following commands are SD Card Specific commands. + * SDIO_APP_CMD should be sent before sending these commands. + */ +#define SD_CMD_APP_SD_SET_BUSWIDTH ((uint8_t)6) /*!< (ACMD6) Defines the data bus width to be used for data transfer. The allowed data bus + widths are given in SCR register. */ +#define SD_CMD_SD_APP_STATUS ((uint8_t)13) /*!< (ACMD13) Sends the SD status. */ +#define SD_CMD_SD_APP_SEND_NUM_WRITE_BLOCKS ((uint8_t)22) /*!< (ACMD22) Sends the number of the written (without errors) write blocks. Responds with + 32bit+CRC data block. */ +#define SD_CMD_SD_APP_OP_COND ((uint8_t)41) /*!< (ACMD41) Sends host capacity support information (HCS) and asks the accessed card to + send its operating condition register (OCR) content in the response on the CMD line. */ +#define SD_CMD_SD_APP_SET_CLR_CARD_DETECT ((uint8_t)42) /*!< (ACMD42) Connects/Disconnects the 50 KOhm pull-up resistor on CD/DAT3 (pin 1) of the card. */ +#define SD_CMD_SD_APP_SEND_SCR ((uint8_t)51) /*!< Reads the SD Configuration Register (SCR). */ +#define SD_CMD_SDIO_RW_DIRECT ((uint8_t)52) /*!< For SD I/O card only, reserved for security specification. */ +#define SD_CMD_SDIO_RW_EXTENDED ((uint8_t)53) /*!< For SD I/O card only, reserved for security specification. */ + +/** + * @brief Following commands are SD Card Specific security commands. + * SD_CMD_APP_CMD should be sent before sending these commands. + */ +#define SD_CMD_SD_APP_GET_MKB ((uint8_t)43) /*!< For SD card only */ +#define SD_CMD_SD_APP_GET_MID ((uint8_t)44) /*!< For SD card only */ +#define SD_CMD_SD_APP_SET_CER_RN1 ((uint8_t)45) /*!< For SD card only */ +#define SD_CMD_SD_APP_GET_CER_RN2 ((uint8_t)46) /*!< For SD card only */ +#define SD_CMD_SD_APP_SET_CER_RES2 ((uint8_t)47) /*!< For SD card only */ +#define SD_CMD_SD_APP_GET_CER_RES1 ((uint8_t)48) /*!< For SD card only */ +#define SD_CMD_SD_APP_SECURE_READ_MULTIPLE_BLOCK ((uint8_t)18) /*!< For SD card only */ +#define SD_CMD_SD_APP_SECURE_WRITE_MULTIPLE_BLOCK ((uint8_t)25) /*!< For SD card only */ +#define SD_CMD_SD_APP_SECURE_ERASE ((uint8_t)38) /*!< For SD card only */ +#define SD_CMD_SD_APP_CHANGE_SECURE_AREA ((uint8_t)49) /*!< For SD card only */ +#define SD_CMD_SD_APP_SECURE_WRITE_MKB ((uint8_t)48) /*!< For SD card only */ + +/** + * @brief Supported SD Memory Cards + */ +#define STD_CAPACITY_SD_CARD_V1_1 ((uint32_t)0x00000000) +#define STD_CAPACITY_SD_CARD_V2_0 ((uint32_t)0x00000001) +#define HIGH_CAPACITY_SD_CARD ((uint32_t)0x00000002) +#define MULTIMEDIA_CARD ((uint32_t)0x00000003) +#define SECURE_DIGITAL_IO_CARD ((uint32_t)0x00000004) +#define HIGH_SPEED_MULTIMEDIA_CARD ((uint32_t)0x00000005) +#define SECURE_DIGITAL_IO_COMBO_CARD ((uint32_t)0x00000006) +#define HIGH_CAPACITY_MMC_CARD ((uint32_t)0x00000007) +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup SD_Exported_macros SD Exported Macros + * @brief macros to handle interrupts and specific clock configurations + * @{ + */ + +/** + * @brief Enable the SD device. + * @retval None + */ +#define __HAL_SD_SDIO_ENABLE() __SDIO_ENABLE() + +/** + * @brief Disable the SD device. + * @retval None + */ +#define __HAL_SD_SDIO_DISABLE() __SDIO_DISABLE() + +/** + * @brief Enable the SDIO DMA transfer. + * @retval None + */ +#define __HAL_SD_SDIO_DMA_ENABLE() __SDIO_DMA_ENABLE() + +/** + * @brief Disable the SDIO DMA transfer. + * @retval None + */ +#define __HAL_SD_SDIO_DMA_DISABLE() __SDIO_DMA_DISABLE() + +/** + * @brief Enable the SD device interrupt. + * @param __HANDLE__: SD Handle + * @param __INTERRUPT__: specifies the SDIO interrupt sources to be enabled. + * This parameter can be one or a combination of the following values: + * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt + * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt + * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt + * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt + * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt + * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt + * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt + * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt + * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt + * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide + * bus mode interrupt + * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt + * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt + * @arg SDIO_IT_TXACT: Data transmit in progress interrupt + * @arg SDIO_IT_RXACT: Data receive in progress interrupt + * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt + * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt + * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt + * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt + * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt + * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt + * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt + * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt + * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt + * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 interrupt + * @retval None + */ +#define __HAL_SD_SDIO_ENABLE_IT(__HANDLE__, __INTERRUPT__) __SDIO_ENABLE_IT((__HANDLE__)->Instance, (__INTERRUPT__)) + +/** + * @brief Disable the SD device interrupt. + * @param __HANDLE__: SD Handle + * @param __INTERRUPT__: specifies the SDIO interrupt sources to be disabled. + * This parameter can be one or a combination of the following values: + * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt + * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt + * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt + * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt + * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt + * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt + * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt + * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt + * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt + * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide + * bus mode interrupt + * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt + * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt + * @arg SDIO_IT_TXACT: Data transmit in progress interrupt + * @arg SDIO_IT_RXACT: Data receive in progress interrupt + * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt + * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt + * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt + * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt + * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt + * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt + * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt + * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt + * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt + * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 interrupt + * @retval None + */ +#define __HAL_SD_SDIO_DISABLE_IT(__HANDLE__, __INTERRUPT__) __SDIO_DISABLE_IT((__HANDLE__)->Instance, (__INTERRUPT__)) + +/** + * @brief Check whether the specified SD flag is set or not. + * @param __HANDLE__: SD Handle + * @param __FLAG__: specifies the flag to check. + * This parameter can be one of the following values: + * @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed) + * @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed) + * @arg SDIO_FLAG_CTIMEOUT: Command response timeout + * @arg SDIO_FLAG_DTIMEOUT: Data timeout + * @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error + * @arg SDIO_FLAG_RXOVERR: Received FIFO overrun error + * @arg SDIO_FLAG_CMDREND: Command response received (CRC check passed) + * @arg SDIO_FLAG_CMDSENT: Command sent (no response required) + * @arg SDIO_FLAG_DATAEND: Data end (data counter, SDIDCOUNT, is zero) + * @arg SDIO_FLAG_STBITERR: Start bit not detected on all data signals in wide bus mode. + * @arg SDIO_FLAG_DBCKEND: Data block sent/received (CRC check passed) + * @arg SDIO_FLAG_CMDACT: Command transfer in progress + * @arg SDIO_FLAG_TXACT: Data transmit in progress + * @arg SDIO_FLAG_RXACT: Data receive in progress + * @arg SDIO_FLAG_TXFIFOHE: Transmit FIFO Half Empty + * @arg SDIO_FLAG_RXFIFOHF: Receive FIFO Half Full + * @arg SDIO_FLAG_TXFIFOF: Transmit FIFO full + * @arg SDIO_FLAG_RXFIFOF: Receive FIFO full + * @arg SDIO_FLAG_TXFIFOE: Transmit FIFO empty + * @arg SDIO_FLAG_RXFIFOE: Receive FIFO empty + * @arg SDIO_FLAG_TXDAVL: Data available in transmit FIFO + * @arg SDIO_FLAG_RXDAVL: Data available in receive FIFO + * @arg SDIO_FLAG_SDIOIT: SD I/O interrupt received + * @arg SDIO_FLAG_CEATAEND: CE-ATA command completion signal received for CMD61 + * @retval The new state of SD FLAG (SET or RESET). + */ +#define __HAL_SD_SDIO_GET_FLAG(__HANDLE__, __FLAG__) __SDIO_GET_FLAG((__HANDLE__)->Instance, (__FLAG__)) + +/** + * @brief Clear the SD's pending flags. + * @param __HANDLE__: SD Handle + * @param __FLAG__: specifies the flag to clear. + * This parameter can be one or a combination of the following values: + * @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed) + * @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed) + * @arg SDIO_FLAG_CTIMEOUT: Command response timeout + * @arg SDIO_FLAG_DTIMEOUT: Data timeout + * @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error + * @arg SDIO_FLAG_RXOVERR: Received FIFO overrun error + * @arg SDIO_FLAG_CMDREND: Command response received (CRC check passed) + * @arg SDIO_FLAG_CMDSENT: Command sent (no response required) + * @arg SDIO_FLAG_DATAEND: Data end (data counter, SDIDCOUNT, is zero) + * @arg SDIO_FLAG_STBITERR: Start bit not detected on all data signals in wide bus mode + * @arg SDIO_FLAG_DBCKEND: Data block sent/received (CRC check passed) + * @arg SDIO_FLAG_SDIOIT: SD I/O interrupt received + * @arg SDIO_FLAG_CEATAEND: CE-ATA command completion signal received for CMD61 + * @retval None + */ +#define __HAL_SD_SDIO_CLEAR_FLAG(__HANDLE__, __FLAG__) __SDIO_CLEAR_FLAG((__HANDLE__)->Instance, (__FLAG__)) + +/** + * @brief Check whether the specified SD interrupt has occurred or not. + * @param __HANDLE__: SD Handle + * @param __INTERRUPT__: specifies the SDIO interrupt source to check. + * This parameter can be one of the following values: + * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt + * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt + * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt + * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt + * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt + * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt + * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt + * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt + * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt + * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide + * bus mode interrupt + * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt + * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt + * @arg SDIO_IT_TXACT: Data transmit in progress interrupt + * @arg SDIO_IT_RXACT: Data receive in progress interrupt + * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt + * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt + * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt + * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt + * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt + * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt + * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt + * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt + * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt + * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 interrupt + * @retval The new state of SD IT (SET or RESET). + */ +#define __HAL_SD_SDIO_GET_IT (__HANDLE__, __INTERRUPT__) __SDIO_GET_IT ((__HANDLE__)->Instance, __INTERRUPT__) + +/** + * @brief Clear the SD's interrupt pending bits. + * @param __HANDLE__ : SD Handle + * @param __INTERRUPT__: specifies the interrupt pending bit to clear. + * This parameter can be one or a combination of the following values: + * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt + * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt + * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt + * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt + * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt + * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt + * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt + * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt + * @arg SDIO_IT_DATAEND: Data end (data counter, SDIO_DCOUNT, is zero) interrupt + * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide + * bus mode interrupt + * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt + * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 + * @retval None + */ +#define __HAL_SD_SDIO_CLEAR_IT(__HANDLE__, __INTERRUPT__) __SDIO_CLEAR_IT((__HANDLE__)->Instance, (__INTERRUPT__)) +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup SD_Exported_Functions SD Exported Functions + * @{ + */ + +/** @defgroup SD_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ +HAL_SD_ErrorTypedef HAL_SD_Init(SD_HandleTypeDef *hsd, HAL_SD_CardInfoTypedef *SDCardInfo); +HAL_StatusTypeDef HAL_SD_DeInit (SD_HandleTypeDef *hsd); +void HAL_SD_MspInit(SD_HandleTypeDef *hsd); +void HAL_SD_MspDeInit(SD_HandleTypeDef *hsd); +/** + * @} + */ + +/** @defgroup SD_Exported_Functions_Group2 I/O operation functions + * @{ + */ +/* Blocking mode: Polling */ +HAL_SD_ErrorTypedef HAL_SD_ReadBlocks(SD_HandleTypeDef *hsd, uint32_t *pReadBuffer, uint64_t ReadAddr, uint32_t BlockSize, uint32_t NumberOfBlocks); +HAL_SD_ErrorTypedef HAL_SD_WriteBlocks(SD_HandleTypeDef *hsd, uint32_t *pWriteBuffer, uint64_t WriteAddr, uint32_t BlockSize, uint32_t NumberOfBlocks); +HAL_SD_ErrorTypedef HAL_SD_Erase(SD_HandleTypeDef *hsd, uint64_t startaddr, uint64_t endaddr); + +/* Non-Blocking mode: Interrupt */ +void HAL_SD_IRQHandler(SD_HandleTypeDef *hsd); + +/* Callback in non blocking modes (DMA) */ +void HAL_SD_DMA_RxCpltCallback(DMA_HandleTypeDef *hdma); +void HAL_SD_DMA_RxErrorCallback(DMA_HandleTypeDef *hdma); +void HAL_SD_DMA_TxCpltCallback(DMA_HandleTypeDef *hdma); +void HAL_SD_DMA_TxErrorCallback(DMA_HandleTypeDef *hdma); +void HAL_SD_XferCpltCallback(SD_HandleTypeDef *hsd); +void HAL_SD_XferErrorCallback(SD_HandleTypeDef *hsd); + +/* Non-Blocking mode: DMA */ +HAL_SD_ErrorTypedef HAL_SD_ReadBlocks_DMA(SD_HandleTypeDef *hsd, uint32_t *pReadBuffer, uint64_t ReadAddr, uint32_t BlockSize, uint32_t NumberOfBlocks); +HAL_SD_ErrorTypedef HAL_SD_WriteBlocks_DMA(SD_HandleTypeDef *hsd, uint32_t *pWriteBuffer, uint64_t WriteAddr, uint32_t BlockSize, uint32_t NumberOfBlocks); +HAL_SD_ErrorTypedef HAL_SD_CheckWriteOperation(SD_HandleTypeDef *hsd, uint32_t Timeout); +HAL_SD_ErrorTypedef HAL_SD_CheckReadOperation(SD_HandleTypeDef *hsd, uint32_t Timeout); +/** + * @} + */ + +/** @defgroup SD_Exported_Functions_Group3 Peripheral Control functions + * @{ + */ +HAL_SD_ErrorTypedef HAL_SD_Get_CardInfo(SD_HandleTypeDef *hsd, HAL_SD_CardInfoTypedef *pCardInfo); +HAL_SD_ErrorTypedef HAL_SD_WideBusOperation_Config(SD_HandleTypeDef *hsd, uint32_t WideMode); +HAL_SD_ErrorTypedef HAL_SD_StopTransfer(SD_HandleTypeDef *hsd); +HAL_SD_ErrorTypedef HAL_SD_HighSpeed (SD_HandleTypeDef *hsd); +/** + * @} + */ + +/* Peripheral State functions ************************************************/ +/** @defgroup SD_Exported_Functions_Group4 Peripheral State functions + * @{ + */ +HAL_SD_ErrorTypedef HAL_SD_SendSDStatus(SD_HandleTypeDef *hsd, uint32_t *pSDstatus); +HAL_SD_ErrorTypedef HAL_SD_GetCardStatus(SD_HandleTypeDef *hsd, HAL_SD_CardStatusTypedef *pCardStatus); +HAL_SD_TransferStateTypedef HAL_SD_GetStatus(SD_HandleTypeDef *hsd); +/** + * @} + */ + +/** + * @} + */ + +/* Private types -------------------------------------------------------------*/ +/** @defgroup SD_Private_Types SD Private Types + * @{ + */ + +/** + * @} + */ + +/* Private defines -----------------------------------------------------------*/ +/** @defgroup SD_Private_Defines SD Private Defines + * @{ + */ + +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +/** @defgroup SD_Private_Variables SD Private Variables + * @{ + */ + +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup SD_Private_Constants SD Private Constants + * @{ + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup SD_Private_Macros SD Private Macros + * @{ + */ + +/** + * @} + */ + +/* Private functions prototypes ----------------------------------------------*/ +/** @defgroup SD_Private_Functions_Prototypes SD Private Functions Prototypes + * @{ + */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @defgroup SD_Private_Functions SD Private Functions + * @{ + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32L151xD || STM32L152xD || STM32L162xD */ + +#endif /* __STM32L1xx_HAL_SD_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_smartcard.h b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_smartcard.h new file mode 100755 index 0000000..505f260 --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_smartcard.h @@ -0,0 +1,698 @@ +/** + ****************************************************************************** + * @file stm32l1xx_hal_smartcard.h + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief This file contains all the functions prototypes for the SMARTCARD + * firmware library. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L1xx_HAL_SMARTCARD_H +#define __STM32L1xx_HAL_SMARTCARD_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_hal_def.h" + +/** @addtogroup STM32L1xx_HAL_Driver + * @{ + */ + +/** @addtogroup SMARTCARD + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup SMARTCARD_Exported_Types SMARTCARD Exported Types + * @{ + */ + + +/** + * @brief SMARTCARD Init Structure definition + */ +typedef struct +{ + uint32_t BaudRate; /*!< This member configures the SmartCard communication baud rate. + The baud rate is computed using the following formula: + - IntegerDivider = ((PCLKx) / (16 * (hsmartcard->Init.BaudRate))) + - FractionalDivider = ((IntegerDivider - ((uint32_t) IntegerDivider)) * 16) + 0.5 */ + + uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame. + This parameter can be a value of @ref SMARTCARD_Word_Length */ + + uint32_t StopBits; /*!< Specifies the number of stop bits transmitted. + This parameter can be a value of @ref SMARTCARD_Stop_Bits */ + + uint32_t Parity; /*!< Specifies the parity mode. + This parameter can be a value of @ref SMARTCARD_Parity + @note When parity is enabled, the computed parity is inserted + at the MSB position of the transmitted data (9th bit when + the word length is set to 9 data bits; 8th bit when the + word length is set to 8 data bits).*/ + + uint32_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled. + This parameter can be a value of @ref SMARTCARD_Mode */ + + uint32_t CLKPolarity; /*!< Specifies the steady state of the serial clock. + This parameter can be a value of @ref SMARTCARD_Clock_Polarity */ + + uint32_t CLKPhase; /*!< Specifies the clock transition on which the bit capture is made. + This parameter can be a value of @ref SMARTCARD_Clock_Phase */ + + uint32_t CLKLastBit; /*!< Specifies whether the clock pulse corresponding to the last transmitted + data bit (MSB) has to be output on the SCLK pin in synchronous mode. + This parameter can be a value of @ref SMARTCARD_Last_Bit */ + + uint32_t Prescaler; /*!< Specifies the SmartCard Prescaler value used for dividing the system clock + to provide the smartcard clock. The value given in the register + (5 significant bits) is multiplied by 2 to give the division factor of + the source clock frequency; + This parameter can be a value of @ref SMARTCARD_Prescaler */ + + uint32_t GuardTime; /*!< Specifies the SmartCard Guard Time value in terms of number + of baud clocks */ + + uint32_t NACKState; /*!< Specifies the SmartCard NACK Transmission state + This parameter can be a value of @ref SMARTCARD_NACK_State */ +}SMARTCARD_InitTypeDef; + +/** + * @brief HAL State structures definition + */ +typedef enum +{ + HAL_SMARTCARD_STATE_RESET = 0x00, /*!< Peripheral is not yet Initialized */ + HAL_SMARTCARD_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */ + HAL_SMARTCARD_STATE_BUSY = 0x02, /*!< an internal process is ongoing */ + HAL_SMARTCARD_STATE_BUSY_TX = 0x12, /*!< Data Transmission process is ongoing */ + HAL_SMARTCARD_STATE_BUSY_RX = 0x22, /*!< Data Reception process is ongoing */ + HAL_SMARTCARD_STATE_BUSY_TX_RX = 0x32, /*!< Data Transmission and Reception process is ongoing */ + HAL_SMARTCARD_STATE_TIMEOUT = 0x03, /*!< Timeout state */ + HAL_SMARTCARD_STATE_ERROR = 0x04 /*!< Error */ +}HAL_SMARTCARD_StateTypeDef; + + +/** + * @brief SMARTCARD handle Structure definition + */ +typedef struct +{ + USART_TypeDef *Instance; /*!< USART registers base address */ + + SMARTCARD_InitTypeDef Init; /*!< SmartCard communication parameters */ + + uint8_t *pTxBuffPtr; /*!< Pointer to SmartCard Tx transfer Buffer */ + + uint16_t TxXferSize; /*!< SmartCard Tx Transfer size */ + + uint16_t TxXferCount; /*!< SmartCard Tx Transfer Counter */ + + uint8_t *pRxBuffPtr; /*!< Pointer to SmartCard Rx transfer Buffer */ + + uint16_t RxXferSize; /*!< SmartCard Rx Transfer size */ + + uint16_t RxXferCount; /*!< SmartCard Rx Transfer Counter */ + + DMA_HandleTypeDef *hdmatx; /*!< SmartCard Tx DMA Handle parameters */ + + DMA_HandleTypeDef *hdmarx; /*!< SmartCard Rx DMA Handle parameters */ + + HAL_LockTypeDef Lock; /*!< Locking object */ + + __IO HAL_SMARTCARD_StateTypeDef State; /*!< SmartCard communication state */ + + __IO uint32_t ErrorCode; /*!< SmartCard Error code */ +}SMARTCARD_HandleTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup SMARTCARD_Exported_Constants SMARTCARD Exported constants + * @{ + */ + +/** @defgroup SMARTCARD_Error_Codes SMARTCARD Error Codes + * @{ + */ +#define HAL_SMARTCARD_ERROR_NONE ((uint32_t)0x00) /*!< No error */ +#define HAL_SMARTCARD_ERROR_PE ((uint32_t)0x01) /*!< Parity error */ +#define HAL_SMARTCARD_ERROR_NE ((uint32_t)0x02) /*!< Noise error */ +#define HAL_SMARTCARD_ERROR_FE ((uint32_t)0x04) /*!< frame error */ +#define HAL_SMARTCARD_ERROR_ORE ((uint32_t)0x08) /*!< Overrun error */ +#define HAL_SMARTCARD_ERROR_DMA ((uint32_t)0x10) /*!< DMA transfer error */ + +/** + * @} + */ + + +/** @defgroup SMARTCARD_Word_Length SMARTCARD Word Length + * @{ + */ +#define SMARTCARD_WORDLENGTH_9B ((uint32_t)USART_CR1_M) + +/** + * @} + */ + +/** @defgroup SMARTCARD_Stop_Bits SMARTCARD Number of Stop Bits + * @{ + */ +#define SMARTCARD_STOPBITS_0_5 ((uint32_t)USART_CR2_STOP_0) +#define SMARTCARD_STOPBITS_1_5 ((uint32_t)(USART_CR2_STOP_0 | USART_CR2_STOP_1)) +/** + * @} + */ + +/** @defgroup SMARTCARD_Parity SMARTCARD Parity + * @{ + */ +#define SMARTCARD_PARITY_EVEN ((uint32_t)USART_CR1_PCE) +#define SMARTCARD_PARITY_ODD ((uint32_t)(USART_CR1_PCE | USART_CR1_PS)) +/** + * @} + */ + +/** @defgroup SMARTCARD_Mode SMARTCARD Mode + * @{ + */ +#define SMARTCARD_MODE_RX ((uint32_t)USART_CR1_RE) +#define SMARTCARD_MODE_TX ((uint32_t)USART_CR1_TE) +#define SMARTCARD_MODE_TX_RX ((uint32_t)(USART_CR1_TE |USART_CR1_RE)) +/** + * @} + */ + +/** @defgroup SMARTCARD_Clock_Polarity SMARTCARD Clock Polarity + * @{ + */ +#define SMARTCARD_POLARITY_LOW ((uint32_t)0x00000000) +#define SMARTCARD_POLARITY_HIGH ((uint32_t)USART_CR2_CPOL) +/** + * @} + */ + +/** @defgroup SMARTCARD_Clock_Phase SMARTCARD Clock Phase + * @{ + */ +#define SMARTCARD_PHASE_1EDGE ((uint32_t)0x00000000) +#define SMARTCARD_PHASE_2EDGE ((uint32_t)USART_CR2_CPHA) +/** + * @} + */ + +/** @defgroup SMARTCARD_Last_Bit SMARTCARD Last Bit + * @{ + */ +#define SMARTCARD_LASTBIT_DISABLE ((uint32_t)0x00000000) +#define SMARTCARD_LASTBIT_ENABLE ((uint32_t)USART_CR2_LBCL) +/** + * @} + */ + +/** @defgroup SMARTCARD_OneBit_Sampling SMARTCARD One Bit Sampling Method + * @{ + */ +#define SMARTCARD_ONE_BIT_SAMPLE_DISABLE ((uint32_t)0x00000000) +#define SMARTCARD_ONE_BIT_SAMPLE_ENABLE ((uint32_t)USART_CR3_ONEBIT) +/** + * @} + */ + +/** @defgroup SMARTCARD_NACK_State SMARTCARD NACK State + * @{ + */ +#define SMARTCARD_NACK_ENABLE ((uint32_t)USART_CR3_NACK) +#define SMARTCARD_NACK_DISABLE ((uint32_t)0x00000000) +/** + * @} + */ + +/** @defgroup SMARTCARD_DMA_Requests SMARTCARD DMA requests + * @{ + */ + +#define SMARTCARD_DMAREQ_TX ((uint32_t)USART_CR3_DMAT) +#define SMARTCARD_DMAREQ_RX ((uint32_t)USART_CR3_DMAR) + +/** + * @} + */ + +/** @defgroup SMARTCARD_Prescaler SMARTCARD Prescaler + * @{ + */ +#define SMARTCARD_PRESCALER_SYSCLK_DIV2 ((uint32_t)0x00000001) /*!< SYSCLK divided by 2 */ +#define SMARTCARD_PRESCALER_SYSCLK_DIV4 ((uint32_t)0x00000002) /*!< SYSCLK divided by 4 */ +#define SMARTCARD_PRESCALER_SYSCLK_DIV6 ((uint32_t)0x00000003) /*!< SYSCLK divided by 6 */ +#define SMARTCARD_PRESCALER_SYSCLK_DIV8 ((uint32_t)0x00000004) /*!< SYSCLK divided by 8 */ +#define SMARTCARD_PRESCALER_SYSCLK_DIV10 ((uint32_t)0x00000005) /*!< SYSCLK divided by 10 */ +#define SMARTCARD_PRESCALER_SYSCLK_DIV12 ((uint32_t)0x00000006) /*!< SYSCLK divided by 12 */ +#define SMARTCARD_PRESCALER_SYSCLK_DIV14 ((uint32_t)0x00000007) /*!< SYSCLK divided by 14 */ +#define SMARTCARD_PRESCALER_SYSCLK_DIV16 ((uint32_t)0x00000008) /*!< SYSCLK divided by 16 */ +#define SMARTCARD_PRESCALER_SYSCLK_DIV18 ((uint32_t)0x00000009) /*!< SYSCLK divided by 18 */ +#define SMARTCARD_PRESCALER_SYSCLK_DIV20 ((uint32_t)0x0000000A) /*!< SYSCLK divided by 20 */ +#define SMARTCARD_PRESCALER_SYSCLK_DIV22 ((uint32_t)0x0000000B) /*!< SYSCLK divided by 22 */ +#define SMARTCARD_PRESCALER_SYSCLK_DIV24 ((uint32_t)0x0000000C) /*!< SYSCLK divided by 24 */ +#define SMARTCARD_PRESCALER_SYSCLK_DIV26 ((uint32_t)0x0000000D) /*!< SYSCLK divided by 26 */ +#define SMARTCARD_PRESCALER_SYSCLK_DIV28 ((uint32_t)0x0000000E) /*!< SYSCLK divided by 28 */ +#define SMARTCARD_PRESCALER_SYSCLK_DIV30 ((uint32_t)0x0000000F) /*!< SYSCLK divided by 30 */ +#define SMARTCARD_PRESCALER_SYSCLK_DIV32 ((uint32_t)0x00000010) /*!< SYSCLK divided by 32 */ +#define SMARTCARD_PRESCALER_SYSCLK_DIV34 ((uint32_t)0x00000011) /*!< SYSCLK divided by 34 */ +#define SMARTCARD_PRESCALER_SYSCLK_DIV36 ((uint32_t)0x00000012) /*!< SYSCLK divided by 36 */ +#define SMARTCARD_PRESCALER_SYSCLK_DIV38 ((uint32_t)0x00000013) /*!< SYSCLK divided by 38 */ +#define SMARTCARD_PRESCALER_SYSCLK_DIV40 ((uint32_t)0x00000014) /*!< SYSCLK divided by 40 */ +#define SMARTCARD_PRESCALER_SYSCLK_DIV42 ((uint32_t)0x00000015) /*!< SYSCLK divided by 42 */ +#define SMARTCARD_PRESCALER_SYSCLK_DIV44 ((uint32_t)0x00000016) /*!< SYSCLK divided by 44 */ +#define SMARTCARD_PRESCALER_SYSCLK_DIV46 ((uint32_t)0x00000017) /*!< SYSCLK divided by 46 */ +#define SMARTCARD_PRESCALER_SYSCLK_DIV48 ((uint32_t)0x00000018) /*!< SYSCLK divided by 48 */ +#define SMARTCARD_PRESCALER_SYSCLK_DIV50 ((uint32_t)0x00000019) /*!< SYSCLK divided by 50 */ +#define SMARTCARD_PRESCALER_SYSCLK_DIV52 ((uint32_t)0x0000001A) /*!< SYSCLK divided by 52 */ +#define SMARTCARD_PRESCALER_SYSCLK_DIV54 ((uint32_t)0x0000001B) /*!< SYSCLK divided by 54 */ +#define SMARTCARD_PRESCALER_SYSCLK_DIV56 ((uint32_t)0x0000001C) /*!< SYSCLK divided by 56 */ +#define SMARTCARD_PRESCALER_SYSCLK_DIV58 ((uint32_t)0x0000001D) /*!< SYSCLK divided by 58 */ +#define SMARTCARD_PRESCALER_SYSCLK_DIV60 ((uint32_t)0x0000001E) /*!< SYSCLK divided by 60 */ +#define SMARTCARD_PRESCALER_SYSCLK_DIV62 ((uint32_t)0x0000001F) /*!< SYSCLK divided by 62 */ +/** + * @} + */ + + + +/** @defgroup SMARTCARD_Flags SMARTCARD Flags + * Elements values convention: 0xXXXX + * - 0xXXXX : Flag mask in the SR register + * @{ + */ + +#define SMARTCARD_FLAG_TXE ((uint32_t)USART_SR_TXE) +#define SMARTCARD_FLAG_TC ((uint32_t)USART_SR_TC) +#define SMARTCARD_FLAG_RXNE ((uint32_t)USART_SR_RXNE) +#define SMARTCARD_FLAG_IDLE ((uint32_t)USART_SR_IDLE) +#define SMARTCARD_FLAG_ORE ((uint32_t)USART_SR_ORE) +#define SMARTCARD_FLAG_NE ((uint32_t)USART_SR_NE) +#define SMARTCARD_FLAG_FE ((uint32_t)USART_SR_FE) +#define SMARTCARD_FLAG_PE ((uint32_t)USART_SR_PE) +/** + * @} + */ + +/** @defgroup SMARTCARD_Interrupt_definition SMARTCARD Interrupts Definition + * Elements values convention: 0xY000XXXX + * - XXXX : Interrupt mask (16 bits) in the Y register + * - Y : Interrupt source register (4 bits) + * - 0001: CR1 register + * - 0010: CR3 register + + * + * @{ + */ + +#define SMARTCARD_IT_PE ((uint32_t)(SMARTCARD_CR1_REG_INDEX << 28 | USART_CR1_PEIE)) +#define SMARTCARD_IT_TXE ((uint32_t)(SMARTCARD_CR1_REG_INDEX << 28 | USART_CR1_TXEIE)) +#define SMARTCARD_IT_TC ((uint32_t)(SMARTCARD_CR1_REG_INDEX << 28 | USART_CR1_TCIE)) +#define SMARTCARD_IT_RXNE ((uint32_t)(SMARTCARD_CR1_REG_INDEX << 28 | USART_CR1_RXNEIE)) +#define SMARTCARD_IT_IDLE ((uint32_t)(SMARTCARD_CR1_REG_INDEX << 28 | USART_CR1_IDLEIE)) +#define SMARTCARD_IT_ERR ((uint32_t)(SMARTCARD_CR3_REG_INDEX << 28 | USART_CR3_EIE)) + +/** + * @} + */ + +/** + * @} + */ + + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup SMARTCARD_Exported_Macros SMARTCARD Exported Macros + * @{ + */ + + +/** @brief Reset SMARTCARD handle state + * @param __HANDLE__: specifies the SMARTCARD Handle. + * SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device). + * @retval None + */ +#define __HAL_SMARTCARD_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SMARTCARD_STATE_RESET) + +/** @brief Flush the Smartcard DR register + * @param __HANDLE__: specifies the SMARTCARD Handle. + * SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device). + * @retval None + */ +#define __HAL_SMARTCARD_FLUSH_DRREGISTER(__HANDLE__) ((__HANDLE__)->Instance->DR) + +/** @brief Check whether the specified Smartcard flag is set or not. + * @param __HANDLE__: specifies the SMARTCARD Handle. + * SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device). + * @param __FLAG__: specifies the flag to check. + * This parameter can be one of the following values: + * @arg SMARTCARD_FLAG_TXE: Transmit data register empty flag + * @arg SMARTCARD_FLAG_TC: Transmission Complete flag + * @arg SMARTCARD_FLAG_RXNE: Receive data register not empty flag + * @arg SMARTCARD_FLAG_IDLE: Idle Line detection flag + * @arg SMARTCARD_FLAG_ORE: OverRun Error flag + * @arg SMARTCARD_FLAG_NE: Noise Error flag + * @arg SMARTCARD_FLAG_FE: Framing Error flag + * @arg SMARTCARD_FLAG_PE: Parity Error flag + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_SMARTCARD_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__)) + +/** @brief Clear the specified Smartcard pending flags. + * @param __HANDLE__: specifies the SMARTCARD Handle. + * SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device). + * @param __FLAG__: specifies the flag to check. + * This parameter can be any combination of the following values: + * @arg SMARTCARD_FLAG_TC: Transmission Complete flag. + * @arg SMARTCARD_FLAG_RXNE: Receive data register not empty flag. + * @retval None + * + * @note PE (Parity error), FE (Framing error), NE (Noise error) and ORE (OverRun + * error) flags are cleared by software sequence: a read operation to + * USART_SR register followed by a read operation to USART_DR register. + * @note RXNE flag can be also cleared by a read to the USART_DR register. + * @note TC flag can be also cleared by software sequence: a read operation to + * USART_SR register followed by a write operation to USART_DR register. + * @note TXE flag is cleared only by a write to the USART_DR register. + * + * @retval None + */ +#define __HAL_SMARTCARD_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__)) + +/** @brief Clear the SMARTCARD PE pending flag. + * @param __HANDLE__: specifies the USART Handle. + * SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device). + * @retval None + */ +#define __HAL_SMARTCARD_CLEAR_PEFLAG(__HANDLE__) \ +do{ \ + __IO uint32_t tmpreg; \ + tmpreg = (__HANDLE__)->Instance->SR; \ + tmpreg = (__HANDLE__)->Instance->DR; \ + UNUSED(tmpreg); \ +}while(0) + + + +/** @brief Clear the SMARTCARD FE pending flag. + * @param __HANDLE__: specifies the USART Handle. + * SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device). + * @retval None + */ +#define __HAL_SMARTCARD_CLEAR_FEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_PEFLAG(__HANDLE__) + +/** @brief Clear the SMARTCARD NE pending flag. + * @param __HANDLE__: specifies the USART Handle. + * SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device). + * @retval None + */ +#define __HAL_SMARTCARD_CLEAR_NEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_PEFLAG(__HANDLE__) + +/** @brief Clear the SMARTCARD ORE pending flag. + * @param __HANDLE__: specifies the USART Handle. + * SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device). + * @retval None + */ +#define __HAL_SMARTCARD_CLEAR_OREFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_PEFLAG(__HANDLE__) + +/** @brief Clear the SMARTCARD IDLE pending flag. + * @param __HANDLE__: specifies the USART Handle. + * SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device). + * @retval None + */ +#define __HAL_SMARTCARD_CLEAR_IDLEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_PEFLAG(__HANDLE__) + +/** @brief Enable the specified SmartCard interrupt. + * @param __HANDLE__: specifies the SMARTCARD Handle. + * SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device). + * @param __INTERRUPT__: specifies the SMARTCARD interrupt to enable. + * This parameter can be one of the following values: + * @arg SMARTCARD_IT_TXE: Transmit Data Register empty interrupt + * @arg SMARTCARD_IT_TC: Transmission complete interrupt + * @arg SMARTCARD_IT_RXNE: Receive Data register not empty interrupt + * @arg SMARTCARD_IT_IDLE: Idle line detection interrupt + * @arg SMARTCARD_IT_PE: Parity Error interrupt + * @arg SMARTCARD_IT_ERR: Error interrupt(Frame error, noise error, overrun error) + * @retval None + */ +#define __HAL_SMARTCARD_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28) == SMARTCARD_CR1_REG_INDEX)? ((__HANDLE__)->Instance->CR1 |= ((__INTERRUPT__) & SMARTCARD_IT_MASK)): \ + ((__HANDLE__)->Instance->CR3 |= ((__INTERRUPT__) & SMARTCARD_IT_MASK))) + +/** @brief Disable the specified SmartCard interrupts. + * @param __HANDLE__: specifies the SMARTCARD Handle. + * SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device). + * @param __INTERRUPT__: specifies the SMARTCARD interrupt to disable. + * This parameter can be one of the following values: + * @arg SMARTCARD_IT_TXE: Transmit Data Register empty interrupt + * @arg SMARTCARD_IT_TC: Transmission complete interrupt + * @arg SMARTCARD_IT_RXNE: Receive Data register not empty interrupt + * @arg SMARTCARD_IT_IDLE: Idle line detection interrupt + * @arg SMARTCARD_IT_PE: Parity Error interrupt + * @arg SMARTCARD_IT_ERR: Error interrupt(Frame error, noise error, overrun error) + */ +#define __HAL_SMARTCARD_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28) == SMARTCARD_CR1_REG_INDEX)? ((__HANDLE__)->Instance->CR1 &= ~((__INTERRUPT__) & SMARTCARD_IT_MASK)): \ + ((__HANDLE__)->Instance->CR3 &= ~ ((__INTERRUPT__) & SMARTCARD_IT_MASK))) + +/** @brief Check whether the specified SmartCard interrupt has occurred or not. + * @param __HANDLE__: specifies the SMARTCARD Handle. + * SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device). + * @param __IT__: specifies the SMARTCARD interrupt source to check. + * This parameter can be one of the following values: + * @arg SMARTCARD_IT_TXE: Transmit Data Register empty interrupt + * @arg SMARTCARD_IT_TC: Transmission complete interrupt + * @arg SMARTCARD_IT_RXNE: Receive Data register not empty interrupt + * @arg SMARTCARD_IT_IDLE: Idle line detection interrupt + * @arg SMARTCARD_IT_ERR: Error interrupt + * @arg SMARTCARD_IT_PE: Parity Error interrupt + * @retval The new state of __IT__ (TRUE or FALSE). + */ +#define __HAL_SMARTCARD_GET_IT_SOURCE(__HANDLE__, __IT__) (((((__IT__) >> 28) == SMARTCARD_CR1_REG_INDEX)? (__HANDLE__)->Instance->CR1: (__HANDLE__)->Instance->CR3) & (((uint32_t)(__IT__)) & SMARTCARD_IT_MASK)) + +/** @brief Enables the SMARTCARD one bit sample method + * @param __HANDLE__: specifies the SMARTCARD Handle. + * @retval None + */ +#define __HAL_SMARTCARD_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR3, (USART_CR3_ONEBIT))) + +/** @brief Disables the SMARTCARD one bit sample method + * @param __HANDLE__: specifies the SMARTCARD Handle. + * @retval None + */ +#define __HAL_SMARTCARD_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) (CLEAR_BIT((__HANDLE__)->Instance->CR3, (USART_CR3_ONEBIT))) + +/** @brief Enable the USART associated to the SMARTCARD Handle + * @param __HANDLE__: specifies the SMARTCARD Handle. + * SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device). + * @retval None + */ +#define __HAL_SMARTCARD_ENABLE(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR1, USART_CR1_UE)) + +/** @brief Disable the USART associated to the SMARTCARD Handle + * @param __HANDLE__: specifies the SMARTCARD Handle. + * SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device). + * @retval None + */ +#define __HAL_SMARTCARD_DISABLE(__HANDLE__) (CLEAR_BIT((__HANDLE__)->Instance->CR1, USART_CR1_UE)) + +/** @brief Enable the SmartCard DMA request. + * @param __HANDLE__: specifies the SmartCard Handle. + * SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device). + * @param __REQUEST__: specifies the SmartCard DMA request. + * This parameter can be one of the following values: + * @arg SMARTCARD_DMAREQ_TX: SmartCard DMA transmit request + * @arg SMARTCARD_DMAREQ_RX: SmartCard DMA receive request + * @retval None + */ +#define __HAL_SMARTCARD_DMA_REQUEST_ENABLE(__HANDLE__, __REQUEST__) (SET_BIT((__HANDLE__)->Instance->CR3, (__REQUEST__))) + +/** @brief Disable the SmartCard DMA request. + * @param __HANDLE__: specifies the SmartCard Handle. + * SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device). + * @param __REQUEST__: specifies the SmartCard DMA request. + * This parameter can be one of the following values: + * @arg SMARTCARD_DMAREQ_TX: SmartCard DMA transmit request + * @arg SMARTCARD_DMAREQ_RX: SmartCard DMA receive request + * @retval None + */ +#define __HAL_SMARTCARD_DMA_REQUEST_DISABLE(__HANDLE__, __REQUEST__) (CLEAR_BIT((__HANDLE__)->Instance->CR3, (__REQUEST__))) + + +/** + * @} + */ + + +/* Private macros --------------------------------------------------------*/ +/** @defgroup SMARTCARD_Private_Macros SMARTCARD Private Macros + * @{ + */ + +#define SMARTCARD_CR1_REG_INDEX 1 +#define SMARTCARD_CR3_REG_INDEX 3 + +#define SMARTCARD_DIV(__PCLK__, __BAUD__) (((__PCLK__)*25)/(4*(__BAUD__))) +#define SMARTCARD_DIVMANT(__PCLK__, __BAUD__) (SMARTCARD_DIV((__PCLK__), (__BAUD__))/100) +#define SMARTCARD_DIVFRAQ(__PCLK__, __BAUD__) (((SMARTCARD_DIV((__PCLK__), (__BAUD__)) - (SMARTCARD_DIVMANT((__PCLK__), (__BAUD__)) * 100)) * 16 + 50) / 100) +/* UART BRR = mantissa + overflow + fraction + = (UART DIVMANT << 4) + (UART DIVFRAQ & 0xF0) + (UART DIVFRAQ & 0x0F) */ +#define SMARTCARD_BRR(_PCLK_, _BAUD_) (((SMARTCARD_DIVMANT((_PCLK_), (_BAUD_)) << 4) + \ + (SMARTCARD_DIVFRAQ((_PCLK_), (_BAUD_)) & 0xF0)) + \ + (SMARTCARD_DIVFRAQ((_PCLK_), (_BAUD_)) & 0x0F)) + +/** Check the Baud rate range. + * The maximum Baud Rate is derived from the maximum clock on APB (i.e. 32 MHz) + * divided by the smallest oversampling used on the USART (i.e. 16) + * __BAUDRATE__: Baud rate set by the configuration function. + * Return : TRUE or FALSE + */ +#define IS_SMARTCARD_BAUDRATE(__BAUDRATE__) ((__BAUDRATE__) < 2000001) + +#define IS_SMARTCARD_WORD_LENGTH(LENGTH) ((LENGTH) == SMARTCARD_WORDLENGTH_9B) + +#define IS_SMARTCARD_STOPBITS(STOPBITS) (((STOPBITS) == SMARTCARD_STOPBITS_0_5) || \ + ((STOPBITS) == SMARTCARD_STOPBITS_1_5)) + +#define IS_SMARTCARD_PARITY(PARITY) (((PARITY) == SMARTCARD_PARITY_EVEN) || \ + ((PARITY) == SMARTCARD_PARITY_ODD)) + +#define IS_SMARTCARD_MODE(MODE) ((((MODE) & (~((uint32_t)SMARTCARD_MODE_TX_RX))) == 0x00) && \ + ((MODE) != (uint32_t)0x00000000)) + +#define IS_SMARTCARD_POLARITY(CPOL) (((CPOL) == SMARTCARD_POLARITY_LOW) || ((CPOL) == SMARTCARD_POLARITY_HIGH)) + +#define IS_SMARTCARD_PHASE(CPHA) (((CPHA) == SMARTCARD_PHASE_1EDGE) || ((CPHA) == SMARTCARD_PHASE_2EDGE)) + +#define IS_SMARTCARD_LASTBIT(LASTBIT) (((LASTBIT) == SMARTCARD_LASTBIT_DISABLE) || \ + ((LASTBIT) == SMARTCARD_LASTBIT_ENABLE)) + +#define IS_SMARTCARD_ONE_BIT_SAMPLE(ONEBIT) (((ONEBIT) == SMARTCARD_ONE_BIT_SAMPLE_DISABLE) || \ + ((ONEBIT) == SMARTCARD_ONE_BIT_SAMPLE_ENABLE)) + +#define IS_SMARTCARD_NACK_STATE(NACK) (((NACK) == SMARTCARD_NACK_ENABLE) || \ + ((NACK) == SMARTCARD_NACK_DISABLE)) + +#define IS_SMARTCARD_PRESCALER(PRESCALER) (((PRESCALER) >= SMARTCARD_PRESCALER_SYSCLK_DIV2) && \ + ((PRESCALER) <= SMARTCARD_PRESCALER_SYSCLK_DIV62) ) + +/** SMARTCARD interruptions flag mask + * + */ +#define SMARTCARD_IT_MASK ((uint32_t) USART_CR1_PEIE | USART_CR1_TXEIE | USART_CR1_TCIE | USART_CR1_RXNEIE | \ + USART_CR1_IDLEIE | USART_CR3_EIE ) + + +/** + * @} + */ + + +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup SMARTCARD_Exported_Functions SMARTCARD Exported Functions + * @{ + */ + +/** @addtogroup SMARTCARD_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ + +/* Initialization/de-initialization functions **********************************/ +HAL_StatusTypeDef HAL_SMARTCARD_Init(SMARTCARD_HandleTypeDef *hsc); +HAL_StatusTypeDef HAL_SMARTCARD_DeInit(SMARTCARD_HandleTypeDef *hsc); +void HAL_SMARTCARD_MspInit(SMARTCARD_HandleTypeDef *hsc); +void HAL_SMARTCARD_MspDeInit(SMARTCARD_HandleTypeDef *hsc); + +/** + * @} + */ + +/** @addtogroup SMARTCARD_Exported_Functions_Group2 IO operation functions + * @{ + */ + +/* IO operation functions *******************************************************/ +HAL_StatusTypeDef HAL_SMARTCARD_Transmit(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_SMARTCARD_Receive(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_SMARTCARD_Transmit_IT(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_SMARTCARD_Receive_IT(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_SMARTCARD_Transmit_DMA(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_SMARTCARD_Receive_DMA(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size); +void HAL_SMARTCARD_IRQHandler(SMARTCARD_HandleTypeDef *hsc); +void HAL_SMARTCARD_TxCpltCallback(SMARTCARD_HandleTypeDef *hsc); +void HAL_SMARTCARD_RxCpltCallback(SMARTCARD_HandleTypeDef *hsc); +void HAL_SMARTCARD_ErrorCallback(SMARTCARD_HandleTypeDef *hsc); + +/** + * @} + */ + +/** @addtogroup SMARTCARD_Exported_Functions_Group3 Peripheral State and Errors functions + * @{ + */ + +/* Peripheral State and Errors functions functions *****************************/ +HAL_SMARTCARD_StateTypeDef HAL_SMARTCARD_GetState(SMARTCARD_HandleTypeDef *hsc); +uint32_t HAL_SMARTCARD_GetError(SMARTCARD_HandleTypeDef *hsc); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32L1xx_HAL_SMARTCARD_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_spi.h b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_spi.h new file mode 100755 index 0000000..9b19854 --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_spi.h @@ -0,0 +1,571 @@ +/** + ****************************************************************************** + * @file stm32l1xx_hal_spi.h + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief Header file of SPI HAL module. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L1xx_HAL_SPI_H +#define __STM32L1xx_HAL_SPI_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_hal_def.h" + +/** @addtogroup STM32L1xx_HAL_Driver + * @{ + */ + +/** @addtogroup SPI + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup SPI_Exported_Types SPI Exported Types + * @{ + */ + +/** + * @brief SPI Configuration Structure definition + */ +typedef struct +{ + uint32_t Mode; /*!< Specifies the SPI operating mode. + This parameter can be a value of @ref SPI_mode */ + + uint32_t Direction; /*!< Specifies the SPI Directional mode state. + This parameter can be a value of @ref SPI_Direction_mode */ + + uint32_t DataSize; /*!< Specifies the SPI data size. + This parameter can be a value of @ref SPI_data_size */ + + uint32_t CLKPolarity; /*!< Specifies the serial clock steady state. + This parameter can be a value of @ref SPI_Clock_Polarity */ + + uint32_t CLKPhase; /*!< Specifies the clock active edge for the bit capture. + This parameter can be a value of @ref SPI_Clock_Phase */ + + uint32_t NSS; /*!< Specifies whether the NSS signal is managed by + hardware (NSS pin) or by software using the SSI bit. + This parameter can be a value of @ref SPI_Slave_Select_management */ + + uint32_t BaudRatePrescaler; /*!< Specifies the Baud Rate prescaler value which will be + used to configure the transmit and receive SCK clock. + This parameter can be a value of @ref SPI_BaudRate_Prescaler + @note The communication clock is derived from the master + clock. The slave clock does not need to be set */ + + uint32_t FirstBit; /*!< Specifies whether data transfers start from MSB or LSB bit. + This parameter can be a value of @ref SPI_MSB_LSB_transmission */ + + uint32_t TIMode; /*!< Specifies if the TI mode is enabled or not. + This parameter can be a value of @ref SPI_TI_mode */ + + uint32_t CRCCalculation; /*!< Specifies if the CRC calculation is enabled or not. + This parameter can be a value of @ref SPI_CRC_Calculation */ + + uint32_t CRCPolynomial; /*!< Specifies the polynomial used for the CRC calculation. + This parameter must be a number between Min_Data = 0 and Max_Data = 65535 */ + +}SPI_InitTypeDef; + +/** + * @brief HAL SPI State structure definition + */ +typedef enum +{ + HAL_SPI_STATE_RESET = 0x00, /*!< SPI not yet initialized or disabled */ + HAL_SPI_STATE_READY = 0x01, /*!< SPI initialized and ready for use */ + HAL_SPI_STATE_BUSY = 0x02, /*!< SPI process is ongoing */ + HAL_SPI_STATE_BUSY_TX = 0x12, /*!< Data Transmission process is ongoing */ + HAL_SPI_STATE_BUSY_RX = 0x22, /*!< Data Reception process is ongoing */ + HAL_SPI_STATE_BUSY_TX_RX = 0x32, /*!< Data Transmission and Reception process is ongoing */ + HAL_SPI_STATE_ERROR = 0x03 /*!< SPI error state */ + +}HAL_SPI_StateTypeDef; + +/** + * @brief SPI handle Structure definition + */ +typedef struct __SPI_HandleTypeDef +{ + SPI_TypeDef *Instance; /* SPI registers base address */ + + SPI_InitTypeDef Init; /* SPI communication parameters */ + + uint8_t *pTxBuffPtr; /* Pointer to SPI Tx transfer Buffer */ + + uint16_t TxXferSize; /* SPI Tx transfer size */ + + __IO uint16_t TxXferCount; /* SPI Tx Transfer Counter */ + + uint8_t *pRxBuffPtr; /* Pointer to SPI Rx transfer Buffer */ + + uint16_t RxXferSize; /* SPI Rx transfer size */ + + __IO uint16_t RxXferCount; /* SPI Rx Transfer Counter */ + + DMA_HandleTypeDef *hdmatx; /* SPI Tx DMA handle parameters */ + + DMA_HandleTypeDef *hdmarx; /* SPI Rx DMA handle parameters */ + + void (*RxISR)(struct __SPI_HandleTypeDef * hspi); /* function pointer on Rx ISR */ + + void (*TxISR)(struct __SPI_HandleTypeDef * hspi); /* function pointer on Tx ISR */ + + HAL_LockTypeDef Lock; /* SPI locking object */ + + __IO HAL_SPI_StateTypeDef State; /* SPI communication state */ + + __IO uint32_t ErrorCode; /* SPI Error code */ + +}SPI_HandleTypeDef; +/** + * @} + */ + + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup SPI_Exported_Constants SPI Exported Constants + * @{ + */ + +/** @defgroup SPI_Error_Codes SPI Error Codes + * @{ + */ +#define HAL_SPI_ERROR_NONE ((uint32_t)0x00) /*!< No error */ +#define HAL_SPI_ERROR_MODF ((uint32_t)0x01) /*!< MODF error */ +#define HAL_SPI_ERROR_CRC ((uint32_t)0x02) /*!< CRC error */ +#define HAL_SPI_ERROR_OVR ((uint32_t)0x04) /*!< OVR error */ +#define HAL_SPI_ERROR_FRE ((uint32_t)0x08) /*!< FRE error */ +#define HAL_SPI_ERROR_DMA ((uint32_t)0x10) /*!< DMA transfer error */ +#define HAL_SPI_ERROR_FLAG ((uint32_t)0x20) /*!< Flag: RXNE,TXE, BSY */ + +/** + * @} + */ + +/** @defgroup SPI_mode SPI mode + * @{ + */ +#define SPI_MODE_SLAVE ((uint32_t)0x00000000) +#define SPI_MODE_MASTER (SPI_CR1_MSTR | SPI_CR1_SSI) + +#define IS_SPI_MODE(MODE) (((MODE) == SPI_MODE_SLAVE) || \ + ((MODE) == SPI_MODE_MASTER)) +/** + * @} + */ + +/** @defgroup SPI_Direction_mode SPI Direction mode + * @{ + */ +#define SPI_DIRECTION_2LINES ((uint32_t)0x00000000) +#define SPI_DIRECTION_2LINES_RXONLY SPI_CR1_RXONLY +#define SPI_DIRECTION_1LINE SPI_CR1_BIDIMODE + +#define IS_SPI_DIRECTION_MODE(MODE) (((MODE) == SPI_DIRECTION_2LINES) || \ + ((MODE) == SPI_DIRECTION_2LINES_RXONLY) || \ + ((MODE) == SPI_DIRECTION_1LINE)) + +#define IS_SPI_DIRECTION_2LINES_OR_1LINE(MODE) (((MODE) == SPI_DIRECTION_2LINES) || \ + ((MODE) == SPI_DIRECTION_1LINE)) + +#define IS_SPI_DIRECTION_2LINES(MODE) ((MODE) == SPI_DIRECTION_2LINES) + +/** + * @} + */ + +/** @defgroup SPI_data_size SPI data size + * @{ + */ +#define SPI_DATASIZE_8BIT ((uint32_t)0x00000000) +#define SPI_DATASIZE_16BIT SPI_CR1_DFF + +#define IS_SPI_DATASIZE(DATASIZE) (((DATASIZE) == SPI_DATASIZE_16BIT) || \ + ((DATASIZE) == SPI_DATASIZE_8BIT)) +/** + * @} + */ + +/** @defgroup SPI_Clock_Polarity SPI Clock Polarity + * @{ + */ +#define SPI_POLARITY_LOW ((uint32_t)0x00000000) +#define SPI_POLARITY_HIGH SPI_CR1_CPOL + +#define IS_SPI_CPOL(CPOL) (((CPOL) == SPI_POLARITY_LOW) || \ + ((CPOL) == SPI_POLARITY_HIGH)) +/** + * @} + */ + +/** @defgroup SPI_Clock_Phase SPI Clock Phase + * @{ + */ +#define SPI_PHASE_1EDGE ((uint32_t)0x00000000) +#define SPI_PHASE_2EDGE SPI_CR1_CPHA + +#define IS_SPI_CPHA(CPHA) (((CPHA) == SPI_PHASE_1EDGE) || \ + ((CPHA) == SPI_PHASE_2EDGE)) +/** + * @} + */ + +/** @defgroup SPI_Slave_Select_management SPI Slave Select management + * @{ + */ +#define SPI_NSS_SOFT SPI_CR1_SSM +#define SPI_NSS_HARD_INPUT ((uint32_t)0x00000000) +#define SPI_NSS_HARD_OUTPUT ((uint32_t)(SPI_CR2_SSOE << 16)) + +#define IS_SPI_NSS(NSS) (((NSS) == SPI_NSS_SOFT) || \ + ((NSS) == SPI_NSS_HARD_INPUT) || \ + ((NSS) == SPI_NSS_HARD_OUTPUT)) +/** + * @} + */ + +/** @defgroup SPI_BaudRate_Prescaler SPI BaudRate Prescaler + * @{ + */ +#define SPI_BAUDRATEPRESCALER_2 ((uint32_t)0x00000000) +#define SPI_BAUDRATEPRESCALER_4 ((uint32_t)SPI_CR1_BR_0) +#define SPI_BAUDRATEPRESCALER_8 ((uint32_t)SPI_CR1_BR_1) +#define SPI_BAUDRATEPRESCALER_16 ((uint32_t)SPI_CR1_BR_1 | SPI_CR1_BR_0) +#define SPI_BAUDRATEPRESCALER_32 ((uint32_t)SPI_CR1_BR_2) +#define SPI_BAUDRATEPRESCALER_64 ((uint32_t)SPI_CR1_BR_2 | SPI_CR1_BR_0) +#define SPI_BAUDRATEPRESCALER_128 ((uint32_t)SPI_CR1_BR_2 | SPI_CR1_BR_1) +#define SPI_BAUDRATEPRESCALER_256 ((uint32_t)SPI_CR1_BR_2 | SPI_CR1_BR_1 | SPI_CR1_BR_0) + +#define IS_SPI_BAUDRATE_PRESCALER(PRESCALER) (((PRESCALER) == SPI_BAUDRATEPRESCALER_2) || \ + ((PRESCALER) == SPI_BAUDRATEPRESCALER_4) || \ + ((PRESCALER) == SPI_BAUDRATEPRESCALER_8) || \ + ((PRESCALER) == SPI_BAUDRATEPRESCALER_16) || \ + ((PRESCALER) == SPI_BAUDRATEPRESCALER_32) || \ + ((PRESCALER) == SPI_BAUDRATEPRESCALER_64) || \ + ((PRESCALER) == SPI_BAUDRATEPRESCALER_128) || \ + ((PRESCALER) == SPI_BAUDRATEPRESCALER_256)) +/** + * @} + */ + +/** @defgroup SPI_MSB_LSB_transmission SPI MSB LSB transmission + * @{ + */ +#define SPI_FIRSTBIT_MSB ((uint32_t)0x00000000) +#define SPI_FIRSTBIT_LSB SPI_CR1_LSBFIRST + +#define IS_SPI_FIRST_BIT(BIT) (((BIT) == SPI_FIRSTBIT_MSB) || \ + ((BIT) == SPI_FIRSTBIT_LSB)) +/** + * @} + */ + +/** @defgroup SPI_CRC_Calculation SPI CRC Calculation + * @{ + */ +#define SPI_CRCCALCULATION_DISABLE ((uint32_t)0x00000000) +#define SPI_CRCCALCULATION_ENABLE SPI_CR1_CRCEN + +#define IS_SPI_CRC_CALCULATION(CALCULATION) (((CALCULATION) == SPI_CRCCALCULATION_DISABLE) || \ + ((CALCULATION) == SPI_CRCCALCULATION_ENABLE)) + +#define IS_SPI_CRC_POLYNOMIAL(POLYNOMIAL) (((POLYNOMIAL) >= 0x1) && ((POLYNOMIAL) <= 0xFFFF)) +/** + * @} + */ + +/** @defgroup SPI_Interrupt_configuration_definition SPI Interrupt configuration definition + * @{ + */ +#define SPI_IT_TXE SPI_CR2_TXEIE +#define SPI_IT_RXNE SPI_CR2_RXNEIE +#define SPI_IT_ERR SPI_CR2_ERRIE +/** + * @} + */ + +/** @defgroup SPI_Flag_definition SPI Flag definition + * @{ + */ +#define SPI_FLAG_RXNE SPI_SR_RXNE +#define SPI_FLAG_TXE SPI_SR_TXE +#define SPI_FLAG_CRCERR SPI_SR_CRCERR +#define SPI_FLAG_MODF SPI_SR_MODF +#define SPI_FLAG_OVR SPI_SR_OVR +#define SPI_FLAG_BSY SPI_SR_BSY +#define SPI_FLAG_FRE SPI_SR_FRE + +/** + * @} + */ + +/** + * @} + */ + + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup SPI_Exported_Macros SPI Exported Macros + * @{ + */ + +/** @brief Reset SPI handle state + * @param __HANDLE__: specifies the SPI handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @retval None + */ +#define __HAL_SPI_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SPI_STATE_RESET) + +/** @brief Enable or disable the specified SPI interrupts. + * @param __HANDLE__: specifies the SPI handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @param __INTERRUPT__: specifies the interrupt source to enable or disable. + * This parameter can be one of the following values: + * @arg SPI_IT_TXE: Tx buffer empty interrupt enable + * @arg SPI_IT_RXNE: RX buffer not empty interrupt enable + * @arg SPI_IT_ERR: Error interrupt enable + * @retval None + */ +#define __HAL_SPI_ENABLE_IT(__HANDLE__, __INTERRUPT__) SET_BIT((__HANDLE__)->Instance->CR2, (__INTERRUPT__)) +#define __HAL_SPI_DISABLE_IT(__HANDLE__, __INTERRUPT__) CLEAR_BIT((__HANDLE__)->Instance->CR2, (__INTERRUPT__)) + +/** @brief Check if the specified SPI interrupt source is enabled or disabled. + * @param __HANDLE__: specifies the SPI handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @param __INTERRUPT__: specifies the SPI interrupt source to check. + * This parameter can be one of the following values: + * @arg SPI_IT_TXE: Tx buffer empty interrupt enable + * @arg SPI_IT_RXNE: RX buffer not empty interrupt enable + * @arg SPI_IT_ERR: Error interrupt enable + * @retval The new state of __IT__ (TRUE or FALSE). + */ +#define __HAL_SPI_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR2 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) + +/** @brief Check whether the specified SPI flag is set or not. + * @param __HANDLE__: specifies the SPI handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @param __FLAG__: specifies the flag to check. + * This parameter can be one of the following values: + * @arg SPI_FLAG_RXNE: Receive buffer not empty flag + * @arg SPI_FLAG_TXE: Transmit buffer empty flag + * @arg SPI_FLAG_CRCERR: CRC error flag + * @arg SPI_FLAG_MODF: Mode fault flag + * @arg SPI_FLAG_OVR: Overrun flag + * @arg SPI_FLAG_BSY: Busy flag + * @arg SPI_FLAG_FRE: Frame format error flag + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_SPI_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__)) + +/** @brief Clear the SPI CRCERR pending flag. + * @param __HANDLE__: specifies the SPI handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @retval None + */ +#define __HAL_SPI_CLEAR_CRCERRFLAG(__HANDLE__) ((__HANDLE__)->Instance->SR = ~(SPI_FLAG_CRCERR)) + +/** @brief Clear the SPI MODF pending flag. + * @param __HANDLE__: specifies the SPI handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @retval None + */ +#define __HAL_SPI_CLEAR_MODFFLAG(__HANDLE__) \ + do{ \ + __IO uint32_t tmpreg_modf; \ + tmpreg_modf = (__HANDLE__)->Instance->SR; \ + CLEAR_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_SPE); \ + UNUSED(tmpreg_modf); \ + }while(0) + +/** @brief Clear the SPI OVR pending flag. + * @param __HANDLE__: specifies the SPI handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @retval None + */ +#define __HAL_SPI_CLEAR_OVRFLAG(__HANDLE__) \ + do{ \ + __IO uint32_t tmpreg_ovr; \ + tmpreg_ovr = (__HANDLE__)->Instance->DR; \ + tmpreg_ovr = (__HANDLE__)->Instance->SR; \ + UNUSED(tmpreg_ovr); \ + }while(0) + +/** @brief Clear the SPI FRE pending flag. + * @param __HANDLE__: specifies the SPI handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @retval None + */ +#define __HAL_SPI_CLEAR_FREFLAG(__HANDLE__) \ + do{ \ + __IO uint32_t tmpreg_fre; \ + tmpreg_fre = (__HANDLE__)->Instance->SR; \ + UNUSED(tmpreg_fre); \ + }while(0) + +/** @brief Enables the SPI. + * @param __HANDLE__: specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @retval None + */ +#define __HAL_SPI_ENABLE(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_SPE) + +/** @brief Disables the SPI. + * @param __HANDLE__: specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @retval None + */ +#define __HAL_SPI_DISABLE(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_SPE) +/** + * @} + */ + + +/* Private macro ------------------------------------------------------------*/ +/** @defgroup SPI_Private_Macros SPI Private Macros + * @{ + */ + +/** @brief Sets the SPI transmit-only mode. + * @param __HANDLE__: specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @retval None + */ +#define SPI_1LINE_TX(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_BIDIOE) + +/** @brief Sets the SPI receive-only mode. + * @param __HANDLE__: specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @retval None + */ +#define SPI_1LINE_RX(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_BIDIOE) + +/** @brief Resets the CRC calculation of the SPI. + * @param __HANDLE__: specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @retval None + */ +#define SPI_RESET_CRC(__HANDLE__) do{CLEAR_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_CRCEN);\ + SET_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_CRCEN);}while(0) +/** + * @} + */ + +/* Include SPI HAL Extension module */ +#include "stm32l1xx_hal_spi_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup SPI_Exported_Functions + * @{ + */ + +/* Initialization/de-initialization functions **********************************/ +/** @addtogroup SPI_Exported_Functions_Group1 + * @{ + */ +HAL_StatusTypeDef HAL_SPI_Init(SPI_HandleTypeDef *hspi); +HAL_StatusTypeDef HAL_SPI_DeInit (SPI_HandleTypeDef *hspi); +void HAL_SPI_MspInit(SPI_HandleTypeDef *hspi); +void HAL_SPI_MspDeInit(SPI_HandleTypeDef *hspi); +/** + * @} + */ + +/* I/O operation functions *****************************************************/ +/** @addtogroup SPI_Exported_Functions_Group2 + * @{ + */ +HAL_StatusTypeDef HAL_SPI_Transmit(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_SPI_Receive(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_SPI_TransmitReceive(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_SPI_Transmit_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_SPI_Receive_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_SPI_TransmitReceive_IT(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size); +HAL_StatusTypeDef HAL_SPI_Transmit_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_SPI_Receive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_SPI_TransmitReceive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size); +HAL_StatusTypeDef HAL_SPI_DMAPause(SPI_HandleTypeDef *hspi); +HAL_StatusTypeDef HAL_SPI_DMAResume(SPI_HandleTypeDef *hspi); +HAL_StatusTypeDef HAL_SPI_DMAStop(SPI_HandleTypeDef *hspi); + +void HAL_SPI_IRQHandler(SPI_HandleTypeDef *hspi); +void HAL_SPI_TxCpltCallback(SPI_HandleTypeDef *hspi); +void HAL_SPI_RxCpltCallback(SPI_HandleTypeDef *hspi); +void HAL_SPI_TxRxCpltCallback(SPI_HandleTypeDef *hspi); +void HAL_SPI_ErrorCallback(SPI_HandleTypeDef *hspi); +void HAL_SPI_TxHalfCpltCallback(SPI_HandleTypeDef *hspi); +void HAL_SPI_RxHalfCpltCallback(SPI_HandleTypeDef *hspi); +void HAL_SPI_TxRxHalfCpltCallback(SPI_HandleTypeDef *hspi); +/** + * @} + */ + + +/* Peripheral State and Control functions **************************************/ +/** @addtogroup SPI_Exported_Functions_Group3 + * @{ + */ +HAL_SPI_StateTypeDef HAL_SPI_GetState(SPI_HandleTypeDef *hspi); +uint32_t HAL_SPI_GetError(SPI_HandleTypeDef *hspi); + +/** + * @} + */ + +/** + * @} + */ + + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32L1xx_HAL_SPI_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_spi_ex.h b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_spi_ex.h new file mode 100755 index 0000000..1dde579 --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_spi_ex.h @@ -0,0 +1,106 @@ +/** + ****************************************************************************** + * @file stm32l1xx_hal_spi_ex.h + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief Header file of SPI HAL module. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L1xx_HAL_SPI_EX_H +#define __STM32L1xx_HAL_SPI_EX_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_hal_def.h" + +/** @addtogroup STM32L1xx_HAL_Driver + * @{ + */ + +/** @addtogroup SPI + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup SPI_Exported_Constants SPI Exported Constants + * @{ + */ +#if defined (STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined (STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined (STM32L151xE) || defined (STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) +/** @defgroup SPI_TI_mode SPI TI mode + * @{ + */ +#define SPI_TIMODE_DISABLE ((uint32_t)0x00000000) +#define SPI_TIMODE_ENABLE SPI_CR2_FRF + +#define IS_SPI_TIMODE(MODE) (((MODE) == SPI_TIMODE_DISABLE) || \ + ((MODE) == SPI_TIMODE_ENABLE)) +#else +/** @defgroup SPI_TI_mode SPI TI mode disable + * @brief SPI TI Mode not supported for Category 1 and 2 + * @{ + */ +#define SPI_TIMODE_DISABLE ((uint32_t)0x00000000) + +#define IS_SPI_TIMODE(MODE) ((MODE) == SPI_TIMODE_DISABLE) + +#endif +/** + * @} + */ + +/** + * @} + */ + + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32L1xx_HAL_SPI_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_sram.h b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_sram.h new file mode 100755 index 0000000..2d2337a --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_sram.h @@ -0,0 +1,201 @@ +/** + ****************************************************************************** + * @file stm32l1xx_hal_sram.h + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief Header file of SRAM HAL module. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L1xx_HAL_SRAM_H +#define __STM32L1xx_HAL_SRAM_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_ll_fsmc.h" + +/** @addtogroup STM32L1xx_HAL_Driver + * @{ + */ + +#if defined (STM32L151xD) || defined (STM32L152xD) || defined (STM32L162xD) + +/** @addtogroup SRAM + * @{ + */ + +/* Exported typedef ----------------------------------------------------------*/ + +/** @defgroup SRAM_Exported_Types SRAM Exported Types + * @{ + */ +/** + * @brief HAL SRAM State structures definition + */ +typedef enum +{ + HAL_SRAM_STATE_RESET = 0x00, /*!< SRAM not yet initialized or disabled */ + HAL_SRAM_STATE_READY = 0x01, /*!< SRAM initialized and ready for use */ + HAL_SRAM_STATE_BUSY = 0x02, /*!< SRAM internal process is ongoing */ + HAL_SRAM_STATE_ERROR = 0x03, /*!< SRAM error state */ + HAL_SRAM_STATE_PROTECTED = 0x04 /*!< SRAM peripheral NORSRAM device write protected */ + +}HAL_SRAM_StateTypeDef; + +/** + * @brief SRAM handle Structure definition + */ +typedef struct +{ + FSMC_NORSRAM_TypeDef *Instance; /*!< Register base address */ + + FSMC_NORSRAM_EXTENDED_TypeDef *Extended; /*!< Extended mode register base address */ + + FSMC_NORSRAM_InitTypeDef Init; /*!< SRAM device control configuration parameters */ + + HAL_LockTypeDef Lock; /*!< SRAM locking object */ + + __IO HAL_SRAM_StateTypeDef State; /*!< SRAM device access state */ + + DMA_HandleTypeDef *hdma; /*!< Pointer DMA handler */ + +}SRAM_HandleTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/* Exported macro ------------------------------------------------------------*/ + +/** @defgroup SRAM_Exported_Macros SRAM Exported Macros + * @{ + */ + +/** @brief Reset SRAM handle state + * @param __HANDLE__: SRAM handle + * @retval None + */ +#define __HAL_SRAM_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SRAM_STATE_RESET) + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup SRAM_Exported_Functions + * @{ + */ + +/** @addtogroup SRAM_Exported_Functions_Group1 + * @{ + */ + +/* Initialization/de-initialization functions **********************************/ +HAL_StatusTypeDef HAL_SRAM_Init(SRAM_HandleTypeDef *hsram, FSMC_NORSRAM_TimingTypeDef *Timing, FSMC_NORSRAM_TimingTypeDef *ExtTiming); +HAL_StatusTypeDef HAL_SRAM_DeInit(SRAM_HandleTypeDef *hsram); +void HAL_SRAM_MspInit(SRAM_HandleTypeDef *hsram); +void HAL_SRAM_MspDeInit(SRAM_HandleTypeDef *hsram); + +void HAL_SRAM_DMA_XferCpltCallback(DMA_HandleTypeDef *hdma); +void HAL_SRAM_DMA_XferErrorCallback(DMA_HandleTypeDef *hdma); + +/** + * @} + */ + +/** @addtogroup SRAM_Exported_Functions_Group2 + * @{ + */ + +/* I/O operation functions *****************************************************/ +HAL_StatusTypeDef HAL_SRAM_Read_8b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint8_t *pDstBuffer, uint32_t BufferSize); +HAL_StatusTypeDef HAL_SRAM_Write_8b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint8_t *pSrcBuffer, uint32_t BufferSize); +HAL_StatusTypeDef HAL_SRAM_Read_16b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint16_t *pDstBuffer, uint32_t BufferSize); +HAL_StatusTypeDef HAL_SRAM_Write_16b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint16_t *pSrcBuffer, uint32_t BufferSize); +HAL_StatusTypeDef HAL_SRAM_Read_32b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pDstBuffer, uint32_t BufferSize); +HAL_StatusTypeDef HAL_SRAM_Write_32b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pSrcBuffer, uint32_t BufferSize); +HAL_StatusTypeDef HAL_SRAM_Read_DMA(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pDstBuffer, uint32_t BufferSize); +HAL_StatusTypeDef HAL_SRAM_Write_DMA(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pSrcBuffer, uint32_t BufferSize); + +/** + * @} + */ + +/** @addtogroup SRAM_Exported_Functions_Group3 + * @{ + */ + +/* SRAM Control functions ******************************************************/ +HAL_StatusTypeDef HAL_SRAM_WriteOperation_Enable(SRAM_HandleTypeDef *hsram); +HAL_StatusTypeDef HAL_SRAM_WriteOperation_Disable(SRAM_HandleTypeDef *hsram); + +/** + * @} + */ + +/** @addtogroup SRAM_Exported_Functions_Group4 + * @{ + */ + +/* SRAM State functions *********************************************************/ +HAL_SRAM_StateTypeDef HAL_SRAM_GetState(SRAM_HandleTypeDef *hsram); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* STM32L151xD || STM32L152xD || STM32L162xD */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32L1xx_HAL_SRAM_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_tim.h b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_tim.h new file mode 100755 index 0000000..5f0d983 --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_tim.h @@ -0,0 +1,1606 @@ +/** + ****************************************************************************** + * @file stm32l1xx_hal_tim.h + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief Header file of TIM HAL module. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L1xx_HAL_TIM_H +#define __STM32L1xx_HAL_TIM_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_hal_def.h" + +/** @addtogroup STM32L1xx_HAL_Driver + * @{ + */ + +/** @addtogroup TIM + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup TIM_Exported_Types TIM Exported Types + * @{ + */ +/** + * @brief TIM Time base Configuration Structure definition + */ +typedef struct +{ + uint32_t Prescaler; /*!< Specifies the prescaler value used to divide the TIM clock. + This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */ + + uint32_t CounterMode; /*!< Specifies the counter mode. + This parameter can be a value of @ref TIM_Counter_Mode */ + + uint32_t Period; /*!< Specifies the period value to be loaded into the active + Auto-Reload Register at the next update event. + This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */ + + uint32_t ClockDivision; /*!< Specifies the clock division. + This parameter can be a value of @ref TIM_ClockDivision */ + +} TIM_Base_InitTypeDef; + +/** + * @brief TIM Output Compare Configuration Structure definition + */ +typedef struct +{ + uint32_t OCMode; /*!< Specifies the TIM mode. + This parameter can be a value of @ref TIM_Output_Compare_and_PWM_modes */ + + uint32_t Pulse; /*!< Specifies the pulse value to be loaded into the Capture Compare Register. + This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */ + + uint32_t OCPolarity; /*!< Specifies the output polarity. + This parameter can be a value of @ref TIM_Output_Compare_Polarity */ + + uint32_t OCFastMode; /*!< Specifies the Fast mode state. + This parameter can be a value of @ref TIM_Output_Fast_State + @note This parameter is valid only in PWM1 and PWM2 mode. */ + + uint32_t OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. + This parameter can be a value of @ref TIM_Output_Compare_Idle_State. */ +} TIM_OC_InitTypeDef; + +/** + * @brief TIM One Pulse Mode Configuration Structure definition + */ +typedef struct +{ + uint32_t OCMode; /*!< Specifies the TIM mode. + This parameter can be a value of @ref TIM_Output_Compare_and_PWM_modes */ + + uint32_t Pulse; /*!< Specifies the pulse value to be loaded into the Capture Compare Register. + This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */ + + uint32_t OCPolarity; /*!< Specifies the output polarity. + This parameter can be a value of @ref TIM_Output_Compare_Polarity */ + + uint32_t OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. + This parameter can be a value of @ref TIM_Output_Compare_Idle_State. */ + + uint32_t ICPolarity; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_Input_Capture_Polarity */ + + uint32_t ICSelection; /*!< Specifies the input. + This parameter can be a value of @ref TIM_Input_Capture_Selection */ + + uint32_t ICFilter; /*!< Specifies the input capture filter. + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ +} TIM_OnePulse_InitTypeDef; + + +/** + * @brief TIM Input Capture Configuration Structure definition + */ +typedef struct +{ + uint32_t ICPolarity; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_Input_Capture_Polarity */ + + uint32_t ICSelection; /*!< Specifies the input. + This parameter can be a value of @ref TIM_Input_Capture_Selection */ + + uint32_t ICPrescaler; /*!< Specifies the Input Capture Prescaler. + This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ + + uint32_t ICFilter; /*!< Specifies the input capture filter. + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ +} TIM_IC_InitTypeDef; + +/** + * @brief TIM Encoder Configuration Structure definition + */ +typedef struct +{ + uint32_t EncoderMode; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_Encoder_Mode */ + + uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_Input_Capture_Polarity */ + + uint32_t IC1Selection; /*!< Specifies the input. + This parameter can be a value of @ref TIM_Input_Capture_Selection */ + + uint32_t IC1Prescaler; /*!< Specifies the Input Capture Prescaler. + This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ + + uint32_t IC1Filter; /*!< Specifies the input capture filter. + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ + + uint32_t IC2Polarity; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_Input_Capture_Polarity */ + + uint32_t IC2Selection; /*!< Specifies the input. + This parameter can be a value of @ref TIM_Input_Capture_Selection */ + + uint32_t IC2Prescaler; /*!< Specifies the Input Capture Prescaler. + This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ + + uint32_t IC2Filter; /*!< Specifies the input capture filter. + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ +} TIM_Encoder_InitTypeDef; + + +/** + * @brief TIM Clock Configuration Handle Structure definition + */ +typedef struct +{ + uint32_t ClockSource; /*!< TIM clock sources + This parameter can be a value of @ref TIM_Clock_Source */ + uint32_t ClockPolarity; /*!< TIM clock polarity + This parameter can be a value of @ref TIM_Clock_Polarity */ + uint32_t ClockPrescaler; /*!< TIM clock prescaler + This parameter can be a value of @ref TIM_Clock_Prescaler */ + uint32_t ClockFilter; /*!< TIM clock filter + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ +}TIM_ClockConfigTypeDef; + +/** + * @brief TIM Clear Input Configuration Handle Structure definition + */ +typedef struct +{ + uint32_t ClearInputState; /*!< TIM clear Input state + This parameter can be ENABLE or DISABLE */ + uint32_t ClearInputSource; /*!< TIM clear Input sources + This parameter can be a value of @ref TIM_ClearInput_Source */ + uint32_t ClearInputPolarity; /*!< TIM Clear Input polarity + This parameter can be a value of @ref TIM_ClearInput_Polarity */ + uint32_t ClearInputPrescaler; /*!< TIM Clear Input prescaler + This parameter can be a value of @ref TIM_ClearInput_Prescaler */ + uint32_t ClearInputFilter; /*!< TIM Clear Input filter + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ +}TIM_ClearInputConfigTypeDef; + +/** + * @brief TIM Slave configuration Structure definition + */ +typedef struct { + uint32_t SlaveMode; /*!< Slave mode selection + This parameter can be a value of @ref TIM_Slave_Mode */ + uint32_t InputTrigger; /*!< Input Trigger source + This parameter can be a value of @ref TIM_Trigger_Selection */ + uint32_t TriggerPolarity; /*!< Input Trigger polarity + This parameter can be a value of @ref TIM_Trigger_Polarity */ + uint32_t TriggerPrescaler; /*!< Input trigger prescaler + This parameter can be a value of @ref TIM_Trigger_Prescaler */ + uint32_t TriggerFilter; /*!< Input trigger filter + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ + +}TIM_SlaveConfigTypeDef; + +/** + * @brief HAL State structures definition + */ +typedef enum +{ + HAL_TIM_STATE_RESET = 0x00, /*!< Peripheral not yet initialized or disabled */ + HAL_TIM_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */ + HAL_TIM_STATE_BUSY = 0x02, /*!< An internal process is ongoing */ + HAL_TIM_STATE_TIMEOUT = 0x03, /*!< Timeout state */ + HAL_TIM_STATE_ERROR = 0x04 /*!< Reception process is ongoing */ +}HAL_TIM_StateTypeDef; + +/** + * @brief HAL Active channel structures definition + */ +typedef enum +{ + HAL_TIM_ACTIVE_CHANNEL_1 = 0x01, /*!< The active channel is 1 */ + HAL_TIM_ACTIVE_CHANNEL_2 = 0x02, /*!< The active channel is 2 */ + HAL_TIM_ACTIVE_CHANNEL_3 = 0x04, /*!< The active channel is 3 */ + HAL_TIM_ACTIVE_CHANNEL_4 = 0x08, /*!< The active channel is 4 */ + HAL_TIM_ACTIVE_CHANNEL_CLEARED = 0x00 /*!< All active channels cleared */ +}HAL_TIM_ActiveChannel; + +/** + * @brief TIM Time Base Handle Structure definition + */ +typedef struct +{ + TIM_TypeDef *Instance; /*!< Register base address */ + TIM_Base_InitTypeDef Init; /*!< TIM Time Base required parameters */ + HAL_TIM_ActiveChannel Channel; /*!< Active channel */ + DMA_HandleTypeDef *hdma[7]; /*!< DMA Handlers array + This array is accessed by a @ref TIM_DMA_Handle_index */ + HAL_LockTypeDef Lock; /*!< Locking object */ + __IO HAL_TIM_StateTypeDef State; /*!< TIM operation state */ +}TIM_HandleTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup TIM_Exported_Constants TIM Exported Constants + * @{ + */ + +/** @defgroup TIM_Input_Channel_Polarity TIM Input Channel Polarity + * @{ + */ +#define TIM_INPUTCHANNELPOLARITY_RISING ((uint32_t)0x00000000) /*!< Polarity for TIx source */ +#define TIM_INPUTCHANNELPOLARITY_FALLING (TIM_CCER_CC1P) /*!< Polarity for TIx source */ +#define TIM_INPUTCHANNELPOLARITY_BOTHEDGE (TIM_CCER_CC1P | TIM_CCER_CC1NP) /*!< Polarity for TIx source */ +/** + * @} + */ + +/** @defgroup TIM_ETR_Polarity TIM ETR Polarity + * @{ + */ +#define TIM_ETRPOLARITY_INVERTED (TIM_SMCR_ETP) /*!< Polarity for ETR source */ +#define TIM_ETRPOLARITY_NONINVERTED ((uint32_t)0x0000) /*!< Polarity for ETR source */ +/** + * @} + */ + +/** @defgroup TIM_ETR_Prescaler TIM ETR Prescaler + * @{ + */ +#define TIM_ETRPRESCALER_DIV1 ((uint32_t)0x0000) /*!< No prescaler is used */ +#define TIM_ETRPRESCALER_DIV2 (TIM_SMCR_ETPS_0) /*!< ETR input source is divided by 2 */ +#define TIM_ETRPRESCALER_DIV4 (TIM_SMCR_ETPS_1) /*!< ETR input source is divided by 4 */ +#define TIM_ETRPRESCALER_DIV8 (TIM_SMCR_ETPS) /*!< ETR input source is divided by 8 */ +/** + * @} + */ + +/** @defgroup TIM_Counter_Mode TIM Counter Mode + * @{ + */ +#define TIM_COUNTERMODE_UP ((uint32_t)0x0000) +#define TIM_COUNTERMODE_DOWN TIM_CR1_DIR +#define TIM_COUNTERMODE_CENTERALIGNED1 TIM_CR1_CMS_0 +#define TIM_COUNTERMODE_CENTERALIGNED2 TIM_CR1_CMS_1 +#define TIM_COUNTERMODE_CENTERALIGNED3 TIM_CR1_CMS +/** + * @} + */ + +/** @defgroup TIM_ClockDivision TIM ClockDivision + * @{ + */ +#define TIM_CLOCKDIVISION_DIV1 ((uint32_t)0x0000) +#define TIM_CLOCKDIVISION_DIV2 (TIM_CR1_CKD_0) +#define TIM_CLOCKDIVISION_DIV4 (TIM_CR1_CKD_1) +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_and_PWM_modes TIM Output Compare and PWM modes + * @{ + */ +#define TIM_OCMODE_TIMING ((uint32_t)0x0000) +#define TIM_OCMODE_ACTIVE (TIM_CCMR1_OC1M_0) +#define TIM_OCMODE_INACTIVE (TIM_CCMR1_OC1M_1) +#define TIM_OCMODE_TOGGLE (TIM_CCMR1_OC1M_0 | TIM_CCMR1_OC1M_1) +#define TIM_OCMODE_PWM1 (TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_2) +#define TIM_OCMODE_PWM2 (TIM_CCMR1_OC1M) +#define TIM_OCMODE_FORCED_ACTIVE (TIM_CCMR1_OC1M_0 | TIM_CCMR1_OC1M_2) +#define TIM_OCMODE_FORCED_INACTIVE (TIM_CCMR1_OC1M_2) +/** + * @} + */ + +/** @defgroup TIM_Output_Fast_State TIM Output Fast State + * @{ + */ +#define TIM_OCFAST_DISABLE ((uint32_t)0x0000) +#define TIM_OCFAST_ENABLE (TIM_CCMR1_OC1FE) +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_Polarity TIM Output Compare Polarity + * @{ + */ +#define TIM_OCPOLARITY_HIGH ((uint32_t)0x0000) +#define TIM_OCPOLARITY_LOW (TIM_CCER_CC1P) +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_Idle_State TIM Output Compare Idle State + * @{ + */ +#define TIM_OCIDLESTATE_SET (TIM_CR2_OIS1) +#define TIM_OCIDLESTATE_RESET ((uint32_t)0x0000) +/** + * @} + */ + +/** @defgroup TIM_Channel TIM Channel + * @{ + */ +#define TIM_CHANNEL_1 ((uint32_t)0x0000) +#define TIM_CHANNEL_2 ((uint32_t)0x0004) +#define TIM_CHANNEL_3 ((uint32_t)0x0008) +#define TIM_CHANNEL_4 ((uint32_t)0x000C) +#define TIM_CHANNEL_ALL ((uint32_t)0x0018) +/** + * @} + */ + +/** @defgroup TIM_Input_Capture_Polarity TIM Input Capture Polarity + * @{ + */ +#define TIM_ICPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING +#define TIM_ICPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING +#define TIM_ICPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE +/** + * @} + */ + +/** @defgroup TIM_Input_Capture_Selection TIM Input Capture Selection + * @{ + */ +#define TIM_ICSELECTION_DIRECTTI (TIM_CCMR1_CC1S_0) /*!< TIM Input 1, 2, 3 or 4 is selected to be + connected to IC1, IC2, IC3 or IC4, respectively */ +#define TIM_ICSELECTION_INDIRECTTI (TIM_CCMR1_CC1S_1) /*!< TIM Input 1, 2, 3 or 4 is selected to be + connected to IC2, IC1, IC4 or IC3, respectively */ +#define TIM_ICSELECTION_TRC (TIM_CCMR1_CC1S) /*!< TIM Input 1, 2, 3 or 4 is selected to be connected to TRC */ +/** + * @} + */ + +/** @defgroup TIM_Input_Capture_Prescaler TIM Input Capture Prescaler + * @{ + */ +#define TIM_ICPSC_DIV1 ((uint32_t)0x0000) /*!< Capture performed each time an edge is detected on the capture input */ +#define TIM_ICPSC_DIV2 (TIM_CCMR1_IC1PSC_0) /*!< Capture performed once every 2 events */ +#define TIM_ICPSC_DIV4 (TIM_CCMR1_IC1PSC_1) /*!< Capture performed once every 4 events */ +#define TIM_ICPSC_DIV8 (TIM_CCMR1_IC1PSC) /*!< Capture performed once every 8 events */ +/** + * @} + */ + +/** @defgroup TIM_One_Pulse_Mode TIM One Pulse Mode + * @{ + */ +#define TIM_OPMODE_SINGLE (TIM_CR1_OPM) +#define TIM_OPMODE_REPETITIVE ((uint32_t)0x0000) +/** + * @} + */ + +/** @defgroup TIM_Encoder_Mode TIM Encoder Mode + * @{ + */ +#define TIM_ENCODERMODE_TI1 (TIM_SMCR_SMS_0) +#define TIM_ENCODERMODE_TI2 (TIM_SMCR_SMS_1) +#define TIM_ENCODERMODE_TI12 (TIM_SMCR_SMS_1 | TIM_SMCR_SMS_0) +/** + * @} + */ + +/** @defgroup TIM_Interrupt_definition TIM Interrupt Definition + * @{ + */ +#define TIM_IT_UPDATE (TIM_DIER_UIE) +#define TIM_IT_CC1 (TIM_DIER_CC1IE) +#define TIM_IT_CC2 (TIM_DIER_CC2IE) +#define TIM_IT_CC3 (TIM_DIER_CC3IE) +#define TIM_IT_CC4 (TIM_DIER_CC4IE) +#define TIM_IT_TRIGGER (TIM_DIER_TIE) +/** + * @} + */ + +/** @defgroup TIM_DMA_sources TIM DMA Sources + * @{ + */ +#define TIM_DMA_UPDATE (TIM_DIER_UDE) +#define TIM_DMA_CC1 (TIM_DIER_CC1DE) +#define TIM_DMA_CC2 (TIM_DIER_CC2DE) +#define TIM_DMA_CC3 (TIM_DIER_CC3DE) +#define TIM_DMA_CC4 (TIM_DIER_CC4DE) +#define TIM_DMA_TRIGGER (TIM_DIER_TDE) +/** + * @} + */ + +/** @defgroup TIM_Event_Source TIM Event Source + * @{ + */ +#define TIM_EVENTSOURCE_UPDATE TIM_EGR_UG +#define TIM_EVENTSOURCE_CC1 TIM_EGR_CC1G +#define TIM_EVENTSOURCE_CC2 TIM_EGR_CC2G +#define TIM_EVENTSOURCE_CC3 TIM_EGR_CC3G +#define TIM_EVENTSOURCE_CC4 TIM_EGR_CC4G +#define TIM_EVENTSOURCE_TRIGGER TIM_EGR_TG +/** + * @} + */ + +/** @defgroup TIM_Flag_definition TIM Flag Definition + * @{ + */ +#define TIM_FLAG_UPDATE (TIM_SR_UIF) +#define TIM_FLAG_CC1 (TIM_SR_CC1IF) +#define TIM_FLAG_CC2 (TIM_SR_CC2IF) +#define TIM_FLAG_CC3 (TIM_SR_CC3IF) +#define TIM_FLAG_CC4 (TIM_SR_CC4IF) +#define TIM_FLAG_TRIGGER (TIM_SR_TIF) +#define TIM_FLAG_CC1OF (TIM_SR_CC1OF) +#define TIM_FLAG_CC2OF (TIM_SR_CC2OF) +#define TIM_FLAG_CC3OF (TIM_SR_CC3OF) +#define TIM_FLAG_CC4OF (TIM_SR_CC4OF) +/** + * @} + */ + +/** @defgroup TIM_Clock_Source TIM Clock Source + * @{ + */ +#define TIM_CLOCKSOURCE_ETRMODE2 (TIM_SMCR_ETPS_1) +#define TIM_CLOCKSOURCE_INTERNAL (TIM_SMCR_ETPS_0) +#define TIM_CLOCKSOURCE_ITR0 ((uint32_t)0x0000) +#define TIM_CLOCKSOURCE_ITR1 (TIM_SMCR_TS_0) +#define TIM_CLOCKSOURCE_ITR2 (TIM_SMCR_TS_1) +#define TIM_CLOCKSOURCE_ITR3 (TIM_SMCR_TS_0 | TIM_SMCR_TS_1) +#define TIM_CLOCKSOURCE_TI1ED (TIM_SMCR_TS_2) +#define TIM_CLOCKSOURCE_TI1 (TIM_SMCR_TS_0 | TIM_SMCR_TS_2) +#define TIM_CLOCKSOURCE_TI2 (TIM_SMCR_TS_1 | TIM_SMCR_TS_2) +#define TIM_CLOCKSOURCE_ETRMODE1 (TIM_SMCR_TS) +/** + * @} + */ + +/** @defgroup TIM_Clock_Polarity TIM Clock Polarity + * @{ + */ +#define TIM_CLOCKPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx clock sources */ +#define TIM_CLOCKPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx clock sources */ +#define TIM_CLOCKPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Polarity for TIx clock sources */ +#define TIM_CLOCKPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Polarity for TIx clock sources */ +#define TIM_CLOCKPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Polarity for TIx clock sources */ +/** + * @} + */ + +/** @defgroup TIM_Clock_Prescaler TIM Clock Prescaler + * @{ + */ +#define TIM_CLOCKPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */ +#define TIM_CLOCKPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR Clock: Capture performed once every 2 events. */ +#define TIM_CLOCKPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR Clock: Capture performed once every 4 events. */ +#define TIM_CLOCKPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR Clock: Capture performed once every 8 events. */ +/** + * @} + */ + +/** @defgroup TIM_ClearInput_Source TIM ClearInput Source + * @{ + */ +#define TIM_CLEARINPUTSOURCE_ETR ((uint32_t)0x0001) +#define TIM_CLEARINPUTSOURCE_OCREFCLR ((uint32_t)0x0002) +#define TIM_CLEARINPUTSOURCE_NONE ((uint32_t)0x0000) +/** + * @} + */ + +/** @defgroup TIM_ClearInput_Polarity TIM ClearInput Polarity + * @{ + */ +#define TIM_CLEARINPUTPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx pin */ +#define TIM_CLEARINPUTPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx pin */ +/** + * @} + */ + +/** @defgroup TIM_ClearInput_Prescaler TIM ClearInput Prescaler + * @{ + */ +#define TIM_CLEARINPUTPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */ +#define TIM_CLEARINPUTPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR pin: Capture performed once every 2 events. */ +#define TIM_CLEARINPUTPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR pin: Capture performed once every 4 events. */ +#define TIM_CLEARINPUTPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR pin: Capture performed once every 8 events. */ +/** + * @} + */ + +/** @defgroup TIM_OSSR_Off_State_Selection_for_Run_mode_state TIM OSSR Off State Selection for Run mode state + * @{ + */ +#define TIM_OSSR_ENABLE (TIM_BDTR_OSSR) +#define TIM_OSSR_DISABLE ((uint32_t)0x0000) +/** + * @} + */ + +/** @defgroup TIM_OSSI_Off_State_Selection_for_Idle_mode_state TIM OSSI Off State Selection for Idle mode state + * @{ + */ +#define TIM_OSSI_ENABLE (TIM_BDTR_OSSI) +#define TIM_OSSI_DISABLE ((uint32_t)0x0000) +/** + * @} + */ + +/** @defgroup TIM_Lock_level TIM Lock level + * @{ + */ +#define TIM_LOCKLEVEL_OFF ((uint32_t)0x0000) +#define TIM_LOCKLEVEL_1 (TIM_BDTR_LOCK_0) +#define TIM_LOCKLEVEL_2 (TIM_BDTR_LOCK_1) +#define TIM_LOCKLEVEL_3 (TIM_BDTR_LOCK) +/** + * @} + */ + +/** @defgroup TIM_AOE_Bit_Set_Reset TIM Automatic Output Enable + * @{ + */ +#define TIM_AUTOMATICOUTPUT_ENABLE (TIM_BDTR_AOE) +#define TIM_AUTOMATICOUTPUT_DISABLE ((uint32_t)0x0000) +/** + * @} + */ + +/** @defgroup TIM_Master_Mode_Selection TIM Master Mode Selection + * @{ + */ +#define TIM_TRGO_RESET ((uint32_t)0x0000) +#define TIM_TRGO_ENABLE (TIM_CR2_MMS_0) +#define TIM_TRGO_UPDATE (TIM_CR2_MMS_1) +#define TIM_TRGO_OC1 ((TIM_CR2_MMS_1 | TIM_CR2_MMS_0)) +#define TIM_TRGO_OC1REF (TIM_CR2_MMS_2) +#define TIM_TRGO_OC2REF ((TIM_CR2_MMS_2 | TIM_CR2_MMS_0)) +#define TIM_TRGO_OC3REF ((TIM_CR2_MMS_2 | TIM_CR2_MMS_1)) +#define TIM_TRGO_OC4REF ((TIM_CR2_MMS_2 | TIM_CR2_MMS_1 | TIM_CR2_MMS_0)) +/** + * @} + */ + +/** @defgroup TIM_Slave_Mode TIM Slave Mode + * @{ + */ +#define TIM_SLAVEMODE_DISABLE ((uint32_t)0x0000) +#define TIM_SLAVEMODE_RESET ((uint32_t)0x0004) +#define TIM_SLAVEMODE_GATED ((uint32_t)0x0005) +#define TIM_SLAVEMODE_TRIGGER ((uint32_t)0x0006) +#define TIM_SLAVEMODE_EXTERNAL1 ((uint32_t)0x0007) +/** + * @} + */ + +/** @defgroup TIM_Master_Slave_Mode TIM Master Slave Mode + * @{ + */ +#define TIM_MASTERSLAVEMODE_ENABLE ((uint32_t)0x0080) +#define TIM_MASTERSLAVEMODE_DISABLE ((uint32_t)0x0000) +/** + * @} + */ + +/** @defgroup TIM_Trigger_Selection TIM Trigger Selection + * @{ + */ +#define TIM_TS_ITR0 ((uint32_t)0x0000) +#define TIM_TS_ITR1 ((uint32_t)0x0010) +#define TIM_TS_ITR2 ((uint32_t)0x0020) +#define TIM_TS_ITR3 ((uint32_t)0x0030) +#define TIM_TS_TI1F_ED ((uint32_t)0x0040) +#define TIM_TS_TI1FP1 ((uint32_t)0x0050) +#define TIM_TS_TI2FP2 ((uint32_t)0x0060) +#define TIM_TS_ETRF ((uint32_t)0x0070) +#define TIM_TS_NONE ((uint32_t)0xFFFF) +/** + * @} + */ + +/** @defgroup TIM_Trigger_Polarity TIM Trigger Polarity + * @{ + */ +#define TIM_TRIGGERPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx trigger sources */ +#define TIM_TRIGGERPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx trigger sources */ +#define TIM_TRIGGERPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Polarity for TIxFPx or TI1_ED trigger sources */ +#define TIM_TRIGGERPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Polarity for TIxFPx or TI1_ED trigger sources */ +#define TIM_TRIGGERPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Polarity for TIxFPx or TI1_ED trigger sources */ +/** + * @} + */ + +/** @defgroup TIM_Trigger_Prescaler TIM Trigger Prescaler + * @{ + */ +#define TIM_TRIGGERPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */ +#define TIM_TRIGGERPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR Trigger: Capture performed once every 2 events. */ +#define TIM_TRIGGERPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR Trigger: Capture performed once every 4 events. */ +#define TIM_TRIGGERPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR Trigger: Capture performed once every 8 events. */ +/** + * @} + */ + +/** @defgroup TIM_TI1_Selection TIM TI1 Input Selection + * @{ + */ +#define TIM_TI1SELECTION_CH1 ((uint32_t)0x0000) +#define TIM_TI1SELECTION_XORCOMBINATION (TIM_CR2_TI1S) +/** + * @} + */ + +/** @defgroup TIM_DMA_Base_address TIM DMA Base Address + * @{ + */ +#define TIM_DMABASE_CR1 (0x00000000) +#define TIM_DMABASE_CR2 (0x00000001) +#define TIM_DMABASE_SMCR (0x00000002) +#define TIM_DMABASE_DIER (0x00000003) +#define TIM_DMABASE_SR (0x00000004) +#define TIM_DMABASE_EGR (0x00000005) +#define TIM_DMABASE_CCMR1 (0x00000006) +#define TIM_DMABASE_CCMR2 (0x00000007) +#define TIM_DMABASE_CCER (0x00000008) +#define TIM_DMABASE_CNT (0x00000009) +#define TIM_DMABASE_PSC (0x0000000A) +#define TIM_DMABASE_ARR (0x0000000B) +#define TIM_DMABASE_CCR1 (0x0000000D) +#define TIM_DMABASE_CCR2 (0x0000000E) +#define TIM_DMABASE_CCR3 (0x0000000F) +#define TIM_DMABASE_CCR4 (0x00000010) +#define TIM_DMABASE_DCR (0x00000012) +#define TIM_DMABASE_OR (0x00000013) +/** + * @} + */ + +/** @defgroup TIM_DMA_Burst_Length TIM DMA Burst Length + * @{ + */ +#define TIM_DMABURSTLENGTH_1TRANSFER (0x00000000) +#define TIM_DMABURSTLENGTH_2TRANSFERS (0x00000100) +#define TIM_DMABURSTLENGTH_3TRANSFERS (0x00000200) +#define TIM_DMABURSTLENGTH_4TRANSFERS (0x00000300) +#define TIM_DMABURSTLENGTH_5TRANSFERS (0x00000400) +#define TIM_DMABURSTLENGTH_6TRANSFERS (0x00000500) +#define TIM_DMABURSTLENGTH_7TRANSFERS (0x00000600) +#define TIM_DMABURSTLENGTH_8TRANSFERS (0x00000700) +#define TIM_DMABURSTLENGTH_9TRANSFERS (0x00000800) +#define TIM_DMABURSTLENGTH_10TRANSFERS (0x00000900) +#define TIM_DMABURSTLENGTH_11TRANSFERS (0x00000A00) +#define TIM_DMABURSTLENGTH_12TRANSFERS (0x00000B00) +#define TIM_DMABURSTLENGTH_13TRANSFERS (0x00000C00) +#define TIM_DMABURSTLENGTH_14TRANSFERS (0x00000D00) +#define TIM_DMABURSTLENGTH_15TRANSFERS (0x00000E00) +#define TIM_DMABURSTLENGTH_16TRANSFERS (0x00000F00) +#define TIM_DMABURSTLENGTH_17TRANSFERS (0x00001000) +#define TIM_DMABURSTLENGTH_18TRANSFERS (0x00001100) +/** + * @} + */ + +/** @defgroup TIM_DMA_Handle_index TIM DMA Handle Index + * @{ + */ +#define TIM_DMA_ID_UPDATE ((uint16_t) 0x0) /*!< Index of the DMA handle used for Update DMA requests */ +#define TIM_DMA_ID_CC1 ((uint16_t) 0x1) /*!< Index of the DMA handle used for Capture/Compare 1 DMA requests */ +#define TIM_DMA_ID_CC2 ((uint16_t) 0x2) /*!< Index of the DMA handle used for Capture/Compare 2 DMA requests */ +#define TIM_DMA_ID_CC3 ((uint16_t) 0x3) /*!< Index of the DMA handle used for Capture/Compare 3 DMA requests */ +#define TIM_DMA_ID_CC4 ((uint16_t) 0x4) /*!< Index of the DMA handle used for Capture/Compare 4 DMA requests */ +#define TIM_DMA_ID_TRIGGER ((uint16_t) 0x6) /*!< Index of the DMA handle used for Trigger DMA requests */ +/** + * @} + */ + +/** @defgroup TIM_Channel_CC_State TIM Capture/Compare Channel State + * @{ + */ +#define TIM_CCx_ENABLE ((uint32_t)0x0001) +#define TIM_CCx_DISABLE ((uint32_t)0x0000) +/** + * @} + */ + +/** + * @} + */ + +/* Private Constants -----------------------------------------------------------*/ +/** @defgroup TIM_Private_Constants TIM Private Constants + * @{ + */ + +/* The counter of a timer instance is disabled only if all the CCx + channels have been disabled */ +#define TIM_CCER_CCxE_MASK ((uint32_t)(TIM_CCER_CC1E | TIM_CCER_CC2E | TIM_CCER_CC3E | TIM_CCER_CC4E)) +/** + * @} + */ + +/* Private Macros -----------------------------------------------------------*/ +/** @defgroup TIM_Private_Macros TIM Private Macros + * @{ + */ + +#define IS_TIM_COUNTER_MODE(MODE) (((MODE) == TIM_COUNTERMODE_UP) || \ + ((MODE) == TIM_COUNTERMODE_DOWN) || \ + ((MODE) == TIM_COUNTERMODE_CENTERALIGNED1) || \ + ((MODE) == TIM_COUNTERMODE_CENTERALIGNED2) || \ + ((MODE) == TIM_COUNTERMODE_CENTERALIGNED3)) + +#define IS_TIM_CLOCKDIVISION_DIV(DIV) (((DIV) == TIM_CLOCKDIVISION_DIV1) || \ + ((DIV) == TIM_CLOCKDIVISION_DIV2) || \ + ((DIV) == TIM_CLOCKDIVISION_DIV4)) + +#define IS_TIM_PWM_MODE(MODE) (((MODE) == TIM_OCMODE_PWM1) || \ + ((MODE) == TIM_OCMODE_PWM2)) + +#define IS_TIM_OC_MODE(MODE) (((MODE) == TIM_OCMODE_TIMING) || \ + ((MODE) == TIM_OCMODE_ACTIVE) || \ + ((MODE) == TIM_OCMODE_INACTIVE) || \ + ((MODE) == TIM_OCMODE_TOGGLE) || \ + ((MODE) == TIM_OCMODE_FORCED_ACTIVE) || \ + ((MODE) == TIM_OCMODE_FORCED_INACTIVE)) + +#define IS_TIM_FAST_STATE(STATE) (((STATE) == TIM_OCFAST_DISABLE) || \ + ((STATE) == TIM_OCFAST_ENABLE)) + +#define IS_TIM_OC_POLARITY(POLARITY) (((POLARITY) == TIM_OCPOLARITY_HIGH) || \ + ((POLARITY) == TIM_OCPOLARITY_LOW)) + +#define IS_TIM_OCIDLE_STATE(STATE) (((STATE) == TIM_OCIDLESTATE_SET) || \ + ((STATE) == TIM_OCIDLESTATE_RESET)) + +#define IS_TIM_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \ + ((CHANNEL) == TIM_CHANNEL_2) || \ + ((CHANNEL) == TIM_CHANNEL_3) || \ + ((CHANNEL) == TIM_CHANNEL_4) || \ + ((CHANNEL) == TIM_CHANNEL_ALL)) + +#define IS_TIM_OPM_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \ + ((CHANNEL) == TIM_CHANNEL_2)) + +#define IS_TIM_IC_POLARITY(POLARITY) (((POLARITY) == TIM_ICPOLARITY_RISING) || \ + ((POLARITY) == TIM_ICPOLARITY_FALLING) || \ + ((POLARITY) == TIM_ICPOLARITY_BOTHEDGE)) + +#define IS_TIM_IC_SELECTION(SELECTION) (((SELECTION) == TIM_ICSELECTION_DIRECTTI) || \ + ((SELECTION) == TIM_ICSELECTION_INDIRECTTI) || \ + ((SELECTION) == TIM_ICSELECTION_TRC)) + +#define IS_TIM_IC_PRESCALER(PRESCALER) (((PRESCALER) == TIM_ICPSC_DIV1) || \ + ((PRESCALER) == TIM_ICPSC_DIV2) || \ + ((PRESCALER) == TIM_ICPSC_DIV4) || \ + ((PRESCALER) == TIM_ICPSC_DIV8)) + +#define IS_TIM_OPM_MODE(MODE) (((MODE) == TIM_OPMODE_SINGLE) || \ + ((MODE) == TIM_OPMODE_REPETITIVE)) + +#define IS_TIM_ENCODER_MODE(MODE) (((MODE) == TIM_ENCODERMODE_TI1) || \ + ((MODE) == TIM_ENCODERMODE_TI2) || \ + ((MODE) == TIM_ENCODERMODE_TI12)) + +#define IS_TIM_DMA_SOURCE(SOURCE) ((((SOURCE) & 0xFFFF80FFU) == 0x00000000U) && ((SOURCE) != 0x00000000U)) + +#define IS_TIM_EVENT_SOURCE(SOURCE) ((((SOURCE) & 0xFFFFFF00U) == 0x00000000U) && ((SOURCE) != 0x00000000U)) + +#define IS_TIM_CLOCKSOURCE(CLOCK) (((CLOCK) == TIM_CLOCKSOURCE_INTERNAL) || \ + ((CLOCK) == TIM_CLOCKSOURCE_ETRMODE2) || \ + ((CLOCK) == TIM_CLOCKSOURCE_ITR0) || \ + ((CLOCK) == TIM_CLOCKSOURCE_ITR1) || \ + ((CLOCK) == TIM_CLOCKSOURCE_ITR2) || \ + ((CLOCK) == TIM_CLOCKSOURCE_ITR3) || \ + ((CLOCK) == TIM_CLOCKSOURCE_TI1ED) || \ + ((CLOCK) == TIM_CLOCKSOURCE_TI1) || \ + ((CLOCK) == TIM_CLOCKSOURCE_TI2) || \ + ((CLOCK) == TIM_CLOCKSOURCE_ETRMODE1)) + +#define IS_TIM_CLOCKPOLARITY(POLARITY) (((POLARITY) == TIM_CLOCKPOLARITY_INVERTED) || \ + ((POLARITY) == TIM_CLOCKPOLARITY_NONINVERTED) || \ + ((POLARITY) == TIM_CLOCKPOLARITY_RISING) || \ + ((POLARITY) == TIM_CLOCKPOLARITY_FALLING) || \ + ((POLARITY) == TIM_CLOCKPOLARITY_BOTHEDGE)) + +#define IS_TIM_CLOCKPRESCALER(PRESCALER) (((PRESCALER) == TIM_CLOCKPRESCALER_DIV1) || \ + ((PRESCALER) == TIM_CLOCKPRESCALER_DIV2) || \ + ((PRESCALER) == TIM_CLOCKPRESCALER_DIV4) || \ + ((PRESCALER) == TIM_CLOCKPRESCALER_DIV8)) + +#define IS_TIM_CLOCKFILTER(ICFILTER) ((ICFILTER) <= 0xF) + +#define IS_TIM_CLEARINPUT_SOURCE(SOURCE) (((SOURCE) == TIM_CLEARINPUTSOURCE_ETR) || \ + ((SOURCE) == TIM_CLEARINPUTSOURCE_OCREFCLR) || \ + ((SOURCE) == TIM_CLEARINPUTSOURCE_NONE)) + +#define IS_TIM_CLEARINPUT_POLARITY(POLARITY) (((POLARITY) == TIM_CLEARINPUTPOLARITY_INVERTED) || \ + ((POLARITY) == TIM_CLEARINPUTPOLARITY_NONINVERTED)) + +#define IS_TIM_CLEARINPUT_PRESCALER(PRESCALER) (((PRESCALER) == TIM_CLEARINPUTPRESCALER_DIV1) || \ + ((PRESCALER) == TIM_CLEARINPUTPRESCALER_DIV2) || \ + ((PRESCALER) == TIM_CLEARINPUTPRESCALER_DIV4) || \ + ((PRESCALER) == TIM_CLEARINPUTPRESCALER_DIV8)) + +#define IS_TIM_CLEARINPUT_FILTER(ICFILTER) ((ICFILTER) <= 0xF) + +#define IS_TIM_OSSR_STATE(STATE) (((STATE) == TIM_OSSR_ENABLE) || \ + ((STATE) == TIM_OSSR_DISABLE)) + +#define IS_TIM_OSSI_STATE(STATE) (((STATE) == TIM_OSSI_ENABLE) || \ + ((STATE) == TIM_OSSI_DISABLE)) + +#define IS_TIM_LOCK_LEVEL(LEVEL) (((LEVEL) == TIM_LOCKLEVEL_OFF) || \ + ((LEVEL) == TIM_LOCKLEVEL_1) || \ + ((LEVEL) == TIM_LOCKLEVEL_2) || \ + ((LEVEL) == TIM_LOCKLEVEL_3)) + +#define IS_TIM_AUTOMATIC_OUTPUT_STATE(STATE) (((STATE) == TIM_AUTOMATICOUTPUT_ENABLE) || \ + ((STATE) == TIM_AUTOMATICOUTPUT_DISABLE)) + +#define IS_TIM_TRGO_SOURCE(SOURCE) (((SOURCE) == TIM_TRGO_RESET) || \ + ((SOURCE) == TIM_TRGO_ENABLE) || \ + ((SOURCE) == TIM_TRGO_UPDATE) || \ + ((SOURCE) == TIM_TRGO_OC1) || \ + ((SOURCE) == TIM_TRGO_OC1REF) || \ + ((SOURCE) == TIM_TRGO_OC2REF) || \ + ((SOURCE) == TIM_TRGO_OC3REF) || \ + ((SOURCE) == TIM_TRGO_OC4REF)) + +#define IS_TIM_SLAVE_MODE(MODE) (((MODE) == TIM_SLAVEMODE_DISABLE) || \ + ((MODE) == TIM_SLAVEMODE_GATED) || \ + ((MODE) == TIM_SLAVEMODE_RESET) || \ + ((MODE) == TIM_SLAVEMODE_TRIGGER) || \ + ((MODE) == TIM_SLAVEMODE_EXTERNAL1)) + +#define IS_TIM_MSM_STATE(STATE) (((STATE) == TIM_MASTERSLAVEMODE_ENABLE) || \ + ((STATE) == TIM_MASTERSLAVEMODE_DISABLE)) + +#define IS_TIM_TRIGGER_SELECTION(SELECTION) (((SELECTION) == TIM_TS_ITR0) || \ + ((SELECTION) == TIM_TS_ITR1) || \ + ((SELECTION) == TIM_TS_ITR2) || \ + ((SELECTION) == TIM_TS_ITR3) || \ + ((SELECTION) == TIM_TS_TI1F_ED) || \ + ((SELECTION) == TIM_TS_TI1FP1) || \ + ((SELECTION) == TIM_TS_TI2FP2) || \ + ((SELECTION) == TIM_TS_ETRF)) + +#define IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(SELECTION) (((SELECTION) == TIM_TS_ITR0) || \ + ((SELECTION) == TIM_TS_ITR1) || \ + ((SELECTION) == TIM_TS_ITR2) || \ + ((SELECTION) == TIM_TS_ITR3) || \ + ((SELECTION) == TIM_TS_NONE)) + +#define IS_TIM_TRIGGERPOLARITY(POLARITY) (((POLARITY) == TIM_TRIGGERPOLARITY_INVERTED ) || \ + ((POLARITY) == TIM_TRIGGERPOLARITY_NONINVERTED) || \ + ((POLARITY) == TIM_TRIGGERPOLARITY_RISING ) || \ + ((POLARITY) == TIM_TRIGGERPOLARITY_FALLING ) || \ + ((POLARITY) == TIM_TRIGGERPOLARITY_BOTHEDGE )) + +#define IS_TIM_TRIGGERPRESCALER(PRESCALER) (((PRESCALER) == TIM_TRIGGERPRESCALER_DIV1) || \ + ((PRESCALER) == TIM_TRIGGERPRESCALER_DIV2) || \ + ((PRESCALER) == TIM_TRIGGERPRESCALER_DIV4) || \ + ((PRESCALER) == TIM_TRIGGERPRESCALER_DIV8)) + +#define IS_TIM_TRIGGERFILTER(ICFILTER) ((ICFILTER) <= 0xF) + +#define IS_TIM_TI1SELECTION(TI1SELECTION) (((TI1SELECTION) == TIM_TI1SELECTION_CH1) || \ + ((TI1SELECTION) == TIM_TI1SELECTION_XORCOMBINATION)) + +#define IS_TIM_DMA_BASE(BASE) (((BASE) == TIM_DMABASE_CR1) || \ + ((BASE) == TIM_DMABASE_CR2) || \ + ((BASE) == TIM_DMABASE_SMCR) || \ + ((BASE) == TIM_DMABASE_DIER) || \ + ((BASE) == TIM_DMABASE_SR) || \ + ((BASE) == TIM_DMABASE_EGR) || \ + ((BASE) == TIM_DMABASE_CCMR1) || \ + ((BASE) == TIM_DMABASE_CCMR2) || \ + ((BASE) == TIM_DMABASE_CCER) || \ + ((BASE) == TIM_DMABASE_CNT) || \ + ((BASE) == TIM_DMABASE_PSC) || \ + ((BASE) == TIM_DMABASE_ARR) || \ + ((BASE) == TIM_DMABASE_CCR1) || \ + ((BASE) == TIM_DMABASE_CCR2) || \ + ((BASE) == TIM_DMABASE_CCR3) || \ + ((BASE) == TIM_DMABASE_CCR4) || \ + ((BASE) == TIM_DMABASE_DCR) || \ + ((BASE) == TIM_DMABASE_OR)) + +#define IS_TIM_DMA_LENGTH(LENGTH) (((LENGTH) == TIM_DMABURSTLENGTH_1TRANSFER) || \ + ((LENGTH) == TIM_DMABURSTLENGTH_2TRANSFERS) || \ + ((LENGTH) == TIM_DMABURSTLENGTH_3TRANSFERS) || \ + ((LENGTH) == TIM_DMABURSTLENGTH_4TRANSFERS) || \ + ((LENGTH) == TIM_DMABURSTLENGTH_5TRANSFERS) || \ + ((LENGTH) == TIM_DMABURSTLENGTH_6TRANSFERS) || \ + ((LENGTH) == TIM_DMABURSTLENGTH_7TRANSFERS) || \ + ((LENGTH) == TIM_DMABURSTLENGTH_8TRANSFERS) || \ + ((LENGTH) == TIM_DMABURSTLENGTH_9TRANSFERS) || \ + ((LENGTH) == TIM_DMABURSTLENGTH_10TRANSFERS) || \ + ((LENGTH) == TIM_DMABURSTLENGTH_11TRANSFERS) || \ + ((LENGTH) == TIM_DMABURSTLENGTH_12TRANSFERS) || \ + ((LENGTH) == TIM_DMABURSTLENGTH_13TRANSFERS) || \ + ((LENGTH) == TIM_DMABURSTLENGTH_14TRANSFERS) || \ + ((LENGTH) == TIM_DMABURSTLENGTH_15TRANSFERS) || \ + ((LENGTH) == TIM_DMABURSTLENGTH_16TRANSFERS) || \ + ((LENGTH) == TIM_DMABURSTLENGTH_17TRANSFERS) || \ + ((LENGTH) == TIM_DMABURSTLENGTH_18TRANSFERS)) + +#define IS_TIM_IC_FILTER(ICFILTER) ((ICFILTER) <= 0xF) + +/** @brief Set TIM IC prescaler + * @param __HANDLE__: TIM handle + * @param __CHANNEL__: specifies TIM Channel + * @param __ICPSC__: specifies the prescaler value. + * @retval None + */ +#define TIM_SET_ICPRESCALERVALUE(__HANDLE__, __CHANNEL__, __ICPSC__) \ +(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= (__ICPSC__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= ((__ICPSC__) << 8)) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= (__ICPSC__)) :\ + ((__HANDLE__)->Instance->CCMR2 |= ((__ICPSC__) << 8))) + +/** @brief Reset TIM IC prescaler + * @param __HANDLE__: TIM handle + * @param __CHANNEL__: specifies TIM Channel + * @retval None + */ +#define TIM_RESET_ICPRESCALERVALUE(__HANDLE__, __CHANNEL__) \ +(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_IC3PSC) :\ + ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_IC4PSC)) + + +/** @brief Set TIM IC polarity + * @param __HANDLE__: TIM handle + * @param __CHANNEL__: specifies TIM Channel + * @param __POLARITY__: specifies TIM Channel Polarity + * @retval None + */ +#define TIM_SET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__, __POLARITY__) \ +(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCER |= (__POLARITY__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCER |= ((__POLARITY__) << 4)) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCER |= ((__POLARITY__) << 8)) :\ + ((__HANDLE__)->Instance->CCER |= (((__POLARITY__) << 12) & TIM_CCER_CC4P))) + +/** @brief Reset TIM IC polarity + * @param __HANDLE__: TIM handle + * @param __CHANNEL__: specifies TIM Channel + * @retval None + */ +#define TIM_RESET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__) \ +(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCER &= (uint16_t)~(TIM_CCER_CC1P | TIM_CCER_CC1NP)) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCER &= (uint16_t)~(TIM_CCER_CC2P | TIM_CCER_CC2NP)) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCER &= (uint16_t)~(TIM_CCER_CC3P | TIM_CCER_CC3NP)) :\ + ((__HANDLE__)->Instance->CCER &= (uint16_t)~TIM_CCER_CC4P)) + +/** + * @} + */ + +/* Private Functions --------------------------------------------------------*/ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup TIM_Exported_Macros TIM Exported Macros + * @{ + */ + +/** @brief Reset TIM handle state + * @param __HANDLE__: TIM handle. + * @retval None + */ +#define __HAL_TIM_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_TIM_STATE_RESET) + +/** + * @brief Enable the TIM peripheral. + * @param __HANDLE__: TIM handle + * @retval None + */ +#define __HAL_TIM_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1|=(TIM_CR1_CEN)) + +/** + * @brief Disable the TIM peripheral. + * @param __HANDLE__: TIM handle + * @retval None + */ +#define __HAL_TIM_DISABLE(__HANDLE__) \ + do { \ + if (((__HANDLE__)->Instance->CCER & TIM_CCER_CCxE_MASK) == 0) \ + { \ + (__HANDLE__)->Instance->CR1 &= ~(TIM_CR1_CEN); \ + } \ + } while(0) + +/** + * @brief Enables the specified TIM interrupt. + * @param __HANDLE__: specifies the TIM Handle. + * @param __INTERRUPT__: specifies the TIM interrupt source to enable. + * This parameter can be one of the following values: + * @arg TIM_IT_UPDATE: Update interrupt + * @arg TIM_IT_CC1: Capture/Compare 1 interrupt + * @arg TIM_IT_CC2: Capture/Compare 2 interrupt + * @arg TIM_IT_CC3: Capture/Compare 3 interrupt + * @arg TIM_IT_CC4: Capture/Compare 4 interrupt + * @arg TIM_IT_COM: Commutation interrupt + * @arg TIM_IT_TRIGGER: Trigger interrupt + * @retval None + */ +#define __HAL_TIM_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DIER |= (__INTERRUPT__)) + +/** + * @brief Disables the specified TIM interrupt. + * @param __HANDLE__: specifies the TIM Handle. + * @param __INTERRUPT__: specifies the TIM interrupt source to disable. + * This parameter can be one of the following values: + * @arg TIM_IT_UPDATE: Update interrupt + * @arg TIM_IT_CC1: Capture/Compare 1 interrupt + * @arg TIM_IT_CC2: Capture/Compare 2 interrupt + * @arg TIM_IT_CC3: Capture/Compare 3 interrupt + * @arg TIM_IT_CC4: Capture/Compare 4 interrupt + * @arg TIM_IT_COM: Commutation interrupt + * @arg TIM_IT_TRIGGER: Trigger interrupt + * @retval None + */ +#define __HAL_TIM_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DIER &= ~(__INTERRUPT__)) + +/** + * @brief Enables the specified DMA request. + * @param __HANDLE__: specifies the TIM Handle. + * @param __DMA__: specifies the TIM DMA request to enable. + * This parameter can be one of the following values: + * @arg TIM_DMA_UPDATE: Update DMA request + * @arg TIM_DMA_CC1: Capture/Compare 1 DMA request + * @arg TIM_DMA_CC2: Capture/Compare 2 DMA request + * @arg TIM_DMA_CC3: Capture/Compare 3 DMA request + * @arg TIM_DMA_CC4: Capture/Compare 4 DMA request + * @arg TIM_DMA_COM: Commutation DMA request + * @arg TIM_DMA_TRIGGER: Trigger DMA request + * @retval None + */ +#define __HAL_TIM_ENABLE_DMA(__HANDLE__, __DMA__) ((__HANDLE__)->Instance->DIER |= (__DMA__)) + +/** + * @brief Disables the specified DMA request. + * @param __HANDLE__: specifies the TIM Handle. + * @param __DMA__: specifies the TIM DMA request to disable. + * This parameter can be one of the following values: + * @arg TIM_DMA_UPDATE: Update DMA request + * @arg TIM_DMA_CC1: Capture/Compare 1 DMA request + * @arg TIM_DMA_CC2: Capture/Compare 2 DMA request + * @arg TIM_DMA_CC3: Capture/Compare 3 DMA request + * @arg TIM_DMA_CC4: Capture/Compare 4 DMA request + * @arg TIM_DMA_COM: Commutation DMA request + * @arg TIM_DMA_TRIGGER: Trigger DMA request + * @retval None + */ +#define __HAL_TIM_DISABLE_DMA(__HANDLE__, __DMA__) ((__HANDLE__)->Instance->DIER &= ~(__DMA__)) + +/** + * @brief Checks whether the specified TIM interrupt flag is set or not. + * @param __HANDLE__: specifies the TIM Handle. + * @param __FLAG__: specifies the TIM interrupt flag to check. + * This parameter can be one of the following values: + * @arg TIM_FLAG_UPDATE: Update interrupt flag + * @arg TIM_FLAG_CC1: Capture/Compare 1 interrupt flag + * @arg TIM_FLAG_CC2: Capture/Compare 2 interrupt flag + * @arg TIM_FLAG_CC3: Capture/Compare 3 interrupt flag + * @arg TIM_FLAG_CC4: Capture/Compare 4 interrupt flag + * @arg TIM_FLAG_COM: Commutation interrupt flag + * @arg TIM_FLAG_TRIGGER: Trigger interrupt flag + * @arg TIM_FLAG_CC1OF: Capture/Compare 1 overcapture flag + * @arg TIM_FLAG_CC2OF: Capture/Compare 2 overcapture flag + * @arg TIM_FLAG_CC3OF: Capture/Compare 3 overcapture flag + * @arg TIM_FLAG_CC4OF: Capture/Compare 4 overcapture flag + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_TIM_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR &(__FLAG__)) == (__FLAG__)) + +/** + * @brief Clears the specified TIM interrupt flag. + * @param __HANDLE__: specifies the TIM Handle. + * @param __FLAG__: specifies the TIM interrupt flag to clear. + * This parameter can be one of the following values: + * @arg TIM_FLAG_UPDATE: Update interrupt flag + * @arg TIM_FLAG_CC1: Capture/Compare 1 interrupt flag + * @arg TIM_FLAG_CC2: Capture/Compare 2 interrupt flag + * @arg TIM_FLAG_CC3: Capture/Compare 3 interrupt flag + * @arg TIM_FLAG_CC4: Capture/Compare 4 interrupt flag + * @arg TIM_FLAG_COM: Commutation interrupt flag + * @arg TIM_FLAG_TRIGGER: Trigger interrupt flag + * @arg TIM_FLAG_CC1OF: Capture/Compare 1 overcapture flag + * @arg TIM_FLAG_CC2OF: Capture/Compare 2 overcapture flag + * @arg TIM_FLAG_CC3OF: Capture/Compare 3 overcapture flag + * @arg TIM_FLAG_CC4OF: Capture/Compare 4 overcapture flag + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_TIM_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__)) + +/** + * @brief Checks whether the specified TIM interrupt has occurred or not. + * @param __HANDLE__: TIM handle + * @param __INTERRUPT__: specifies the TIM interrupt source to check. + * @retval The state of TIM_IT (SET or RESET). + */ +#define __HAL_TIM_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->DIER & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) + +/** + * @brief Clear the TIM interrupt pending bits + * @param __HANDLE__: TIM handle + * @param __INTERRUPT__: specifies the interrupt pending bit to clear. + * @retval None + */ +#define __HAL_TIM_CLEAR_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->SR = ~(__INTERRUPT__)) + +/** + * @brief Indicates whether or not the TIM Counter is used as downcounter + * @param __HANDLE__: TIM handle. + * @retval False (Counter used as upcounter) or True (Counter used as downcounter) + * @note This macro is particularly usefull to get the counting mode when the timer operates in Center-aligned mode or Encoder +mode. + */ +#define __HAL_TIM_IS_TIM_COUNTING_DOWN(__HANDLE__) (((__HANDLE__)->Instance->CR1 & (TIM_CR1_DIR)) == (TIM_CR1_DIR)) + +/** + * @brief Sets the TIM active prescaler register value on update event. + * @param __HANDLE__: TIM handle. + * @param __PRESC__: specifies the active prescaler register new value. + * @retval None + */ +#define __HAL_TIM_SET_PRESCALER(__HANDLE__, __PRESC__) ((__HANDLE__)->Instance->PSC = (__PRESC__)) + +/** + * @brief Sets the TIM Capture Compare Register value on runtime without + * calling another time ConfigChannel function. + * @param __HANDLE__: TIM handle. + * @param __CHANNEL__ : TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @param __COMPARE__: specifies the Capture Compare register new value. + * @retval None + */ +#define __HAL_TIM_SET_COMPARE(__HANDLE__, __CHANNEL__, __COMPARE__) \ +(*(__IO uint32_t *)(&((__HANDLE__)->Instance->CCR1) + ((__CHANNEL__) >> 2)) = (__COMPARE__)) + +/** + * @brief Gets the TIM Capture Compare Register value on runtime + * @param __HANDLE__: TIM handle. + * @param __CHANNEL__ : TIM Channel associated with the capture compare register + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: get capture/compare 1 register value + * @arg TIM_CHANNEL_2: get capture/compare 2 register value + * @arg TIM_CHANNEL_3: get capture/compare 3 register value + * @arg TIM_CHANNEL_4: get capture/compare 4 register value + * @retval None + */ +#define __HAL_TIM_GET_COMPARE(__HANDLE__, __CHANNEL__) \ + (*(__IO uint32_t *)(&((__HANDLE__)->Instance->CCR1) + ((__CHANNEL__) >> 2))) + +/** + * @brief Sets the TIM Counter Register value on runtime. + * @param __HANDLE__: TIM handle. + * @param __COUNTER__: specifies the Counter register new value. + * @retval None + */ +#define __HAL_TIM_SET_COUNTER(__HANDLE__, __COUNTER__) ((__HANDLE__)->Instance->CNT = (__COUNTER__)) + +/** + * @brief Gets the TIM Counter Register value on runtime. + * @param __HANDLE__: TIM handle. + * @retval None + */ +#define __HAL_TIM_GET_COUNTER(__HANDLE__) \ + ((__HANDLE__)->Instance->CNT) + +/** + * @brief Sets the TIM Autoreload Register value on runtime without calling + * another time any Init function. + * @param __HANDLE__: TIM handle. + * @param __AUTORELOAD__: specifies the Counter register new value. + * @retval None + */ +#define __HAL_TIM_SET_AUTORELOAD(__HANDLE__, __AUTORELOAD__) \ + do{ \ + (__HANDLE__)->Instance->ARR = (__AUTORELOAD__); \ + (__HANDLE__)->Init.Period = (__AUTORELOAD__); \ + } while(0) + +/** + * @brief Gets the TIM Autoreload Register value on runtime + * @param __HANDLE__: TIM handle. + * @retval None + */ +#define __HAL_TIM_GET_AUTORELOAD(__HANDLE__) \ + ((__HANDLE__)->Instance->ARR) + +/** + * @brief Sets the TIM Clock Division value on runtime without calling + * another time any Init function. + * @param __HANDLE__: TIM handle. + * @param __CKD__: specifies the clock division value. + * This parameter can be one of the following value: + * @arg TIM_CLOCKDIVISION_DIV1 + * @arg TIM_CLOCKDIVISION_DIV2 + * @arg TIM_CLOCKDIVISION_DIV4 + * @retval None + */ +#define __HAL_TIM_SET_CLOCKDIVISION(__HANDLE__, __CKD__) \ + do{ \ + (__HANDLE__)->Instance->CR1 &= (uint16_t)(~TIM_CR1_CKD); \ + (__HANDLE__)->Instance->CR1 |= (__CKD__); \ + (__HANDLE__)->Init.ClockDivision = (__CKD__); \ + } while(0) + +/** + * @brief Gets the TIM Clock Division value on runtime + * @param __HANDLE__: TIM handle. + * @retval None + */ +#define __HAL_TIM_GET_CLOCKDIVISION(__HANDLE__) \ + ((__HANDLE__)->Instance->CR1 & TIM_CR1_CKD) + +/** + * @brief Sets the TIM Input Capture prescaler on runtime without calling + * another time HAL_TIM_IC_ConfigChannel() function. + * @param __HANDLE__: TIM handle. + * @param __CHANNEL__ : TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @param __ICPSC__: specifies the Input Capture4 prescaler new value. + * This parameter can be one of the following values: + * @arg TIM_ICPSC_DIV1: no prescaler + * @arg TIM_ICPSC_DIV2: capture is done once every 2 events + * @arg TIM_ICPSC_DIV4: capture is done once every 4 events + * @arg TIM_ICPSC_DIV8: capture is done once every 8 events + * @retval None + */ +#define __HAL_TIM_SET_ICPRESCALER(__HANDLE__, __CHANNEL__, __ICPSC__) \ + do{ \ + TIM_RESET_ICPRESCALERVALUE((__HANDLE__), (__CHANNEL__)); \ + TIM_SET_ICPRESCALERVALUE((__HANDLE__), (__CHANNEL__), (__ICPSC__)); \ + } while(0) + +/** + * @brief Gets the TIM Input Capture prescaler on runtime + * @param __HANDLE__: TIM handle. + * @param __CHANNEL__ : TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: get input capture 1 prescaler value + * @arg TIM_CHANNEL_2: get input capture 2 prescaler value + * @arg TIM_CHANNEL_3: get input capture 3 prescaler value + * @arg TIM_CHANNEL_4: get input capture 4 prescaler value + * @retval None + */ +#define __HAL_TIM_GET_ICPRESCALER(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 & TIM_CCMR1_IC1PSC) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? (((__HANDLE__)->Instance->CCMR1 & TIM_CCMR1_IC2PSC) >> 8) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 & TIM_CCMR2_IC3PSC) :\ + (((__HANDLE__)->Instance->CCMR2 & TIM_CCMR2_IC4PSC)) >> 8) + +/** + * @brief Set the Update Request Source (URS) bit of the TIMx_CR1 register + * @param __HANDLE__: TIM handle. + * @note When the USR bit of the TIMx_CR1 register is set, only counter + * overflow/underflow generates an update interrupt or DMA request (if + * enabled) + * @retval None + */ +#define __HAL_TIM_URS_ENABLE(__HANDLE__) \ + ((__HANDLE__)->Instance->CR1|= (TIM_CR1_URS)) + +/** + * @brief Reset the Update Request Source (URS) bit of the TIMx_CR1 register + * @param __HANDLE__: TIM handle. + * @note When the USR bit of the TIMx_CR1 register is reset, any of the + * following events generate an update interrupt or DMA request (if + * enabled): + * (+) Counter overflow/underflow + * (+) Setting the UG bit + * (+) Update generation through the slave mode controller + * @retval None + */ +#define __HAL_TIM_URS_DISABLE(__HANDLE__) \ + ((__HANDLE__)->Instance->CR1&=~(TIM_CR1_URS)) + +/** + * @brief Sets the TIM Capture x input polarity on runtime. + * @param __HANDLE__: TIM handle. + * @param __CHANNEL__: TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @param __POLARITY__: Polarity for TIx source + * @arg TIM_INPUTCHANNELPOLARITY_RISING: Rising Edge + * @arg TIM_INPUTCHANNELPOLARITY_FALLING: Falling Edge + * @arg TIM_INPUTCHANNELPOLARITY_BOTHEDGE: Rising and Falling Edge + * @note The polarity TIM_INPUTCHANNELPOLARITY_BOTHEDGE is not authorized for TIM Channel 4. + * @retval None + */ +#define __HAL_TIM_SET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__, __POLARITY__) \ + do{ \ + TIM_RESET_CAPTUREPOLARITY((__HANDLE__), (__CHANNEL__)); \ + TIM_SET_CAPTUREPOLARITY((__HANDLE__), (__CHANNEL__), (__POLARITY__)); \ + }while(0) + +/** + * @} + */ + +/* Include TIM HAL Extension module */ +#include "stm32l1xx_hal_tim_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup TIM_Exported_Functions + * @{ + */ + +/** @addtogroup TIM_Exported_Functions_Group1 + * @{ + */ +/* Time Base functions ********************************************************/ +HAL_StatusTypeDef HAL_TIM_Base_Init(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIM_Base_DeInit(TIM_HandleTypeDef *htim); +void HAL_TIM_Base_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef *htim); +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIM_Base_Start(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIM_Base_Stop(TIM_HandleTypeDef *htim); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIM_Base_Start_IT(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIM_Base_Stop_IT(TIM_HandleTypeDef *htim); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIM_Base_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length); +HAL_StatusTypeDef HAL_TIM_Base_Stop_DMA(TIM_HandleTypeDef *htim); +/** + * @} + */ + +/** @addtogroup TIM_Exported_Functions_Group2 + * @{ + */ +/* Timer Output Compare functions **********************************************/ +HAL_StatusTypeDef HAL_TIM_OC_Init(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIM_OC_DeInit(TIM_HandleTypeDef *htim); +void HAL_TIM_OC_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIM_OC_MspDeInit(TIM_HandleTypeDef *htim); +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIM_OC_Start(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_OC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIM_OC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_OC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length); +HAL_StatusTypeDef HAL_TIM_OC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); + +/** + * @} + */ + +/** @addtogroup TIM_Exported_Functions_Group3 + * @{ + */ +/* Timer PWM functions *********************************************************/ +HAL_StatusTypeDef HAL_TIM_PWM_Init(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIM_PWM_DeInit(TIM_HandleTypeDef *htim); +void HAL_TIM_PWM_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIM_PWM_MspDeInit(TIM_HandleTypeDef *htim); +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIM_PWM_Start(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_PWM_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIM_PWM_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_PWM_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length); +HAL_StatusTypeDef HAL_TIM_PWM_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); +/** + * @} + */ + +/** @addtogroup TIM_Exported_Functions_Group4 + * @{ + */ +/* Timer Input Capture functions ***********************************************/ +HAL_StatusTypeDef HAL_TIM_IC_Init(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIM_IC_DeInit(TIM_HandleTypeDef *htim); +void HAL_TIM_IC_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIM_IC_MspDeInit(TIM_HandleTypeDef *htim); +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIM_IC_Start(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_IC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIM_IC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_IC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length); +HAL_StatusTypeDef HAL_TIM_IC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); +/** + * @} + */ + +/** @addtogroup TIM_Exported_Functions_Group5 + * @{ + */ +/* Timer One Pulse functions ***************************************************/ +HAL_StatusTypeDef HAL_TIM_OnePulse_Init(TIM_HandleTypeDef *htim, uint32_t OnePulseMode); +HAL_StatusTypeDef HAL_TIM_OnePulse_DeInit(TIM_HandleTypeDef *htim); +void HAL_TIM_OnePulse_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIM_OnePulse_MspDeInit(TIM_HandleTypeDef *htim); +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIM_OnePulse_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +HAL_StatusTypeDef HAL_TIM_OnePulse_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIM_OnePulse_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +HAL_StatusTypeDef HAL_TIM_OnePulse_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +/** + * @} + */ + +/** @addtogroup TIM_Exported_Functions_Group6 + * @{ + */ +/* Timer Encoder functions *****************************************************/ +HAL_StatusTypeDef HAL_TIM_Encoder_Init(TIM_HandleTypeDef *htim, TIM_Encoder_InitTypeDef* sConfig); +HAL_StatusTypeDef HAL_TIM_Encoder_DeInit(TIM_HandleTypeDef *htim); +void HAL_TIM_Encoder_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIM_Encoder_MspDeInit(TIM_HandleTypeDef *htim); + /* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIM_Encoder_Start(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_Encoder_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIM_Encoder_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_Encoder_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData1, uint32_t *pData2, uint16_t Length); +HAL_StatusTypeDef HAL_TIM_Encoder_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); + +/** + * @} + */ + +/** @addtogroup TIM_Exported_Functions_Group7 + * @{ + */ +/* Interrupt Handler functions **********************************************/ +void HAL_TIM_IRQHandler(TIM_HandleTypeDef *htim); +/** + * @} + */ + +/** @addtogroup TIM_Exported_Functions_Group8 + * @{ + */ +/* Control functions *********************************************************/ +HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef* sConfig, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef* sConfig, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_IC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_IC_InitTypeDef* sConfig, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OnePulse_InitTypeDef* sConfig, uint32_t OutputChannel, uint32_t InputChannel); +HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef *htim, TIM_ClearInputConfigTypeDef * sClearInputConfig, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_ConfigClockSource(TIM_HandleTypeDef *htim, TIM_ClockConfigTypeDef * sClockSourceConfig); +HAL_StatusTypeDef HAL_TIM_ConfigTI1Input(TIM_HandleTypeDef *htim, uint32_t TI1_Selection); +HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchronization(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef * sSlaveConfig); +HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchronization_IT(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef * sSlaveConfig); +HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc, \ + uint32_t *BurstBuffer, uint32_t BurstLength); +HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc); +HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc, \ + uint32_t *BurstBuffer, uint32_t BurstLength); +HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc); +HAL_StatusTypeDef HAL_TIM_GenerateEvent(TIM_HandleTypeDef *htim, uint32_t EventSource); +uint32_t HAL_TIM_ReadCapturedValue(TIM_HandleTypeDef *htim, uint32_t Channel); + +/** + * @} + */ + +/** @addtogroup TIM_Exported_Functions_Group9 + * @{ + */ +/* Callback in non blocking modes (Interrupt and DMA) *************************/ +void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_OC_DelayElapsedCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_IC_CaptureCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_PWM_PulseFinishedCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_TriggerCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_ErrorCallback(TIM_HandleTypeDef *htim); +/** + * @} + */ + +/** @addtogroup TIM_Exported_Functions_Group10 + * @{ + */ +/* Peripheral State functions **************************************************/ +HAL_TIM_StateTypeDef HAL_TIM_Base_GetState(TIM_HandleTypeDef *htim); +HAL_TIM_StateTypeDef HAL_TIM_OC_GetState(TIM_HandleTypeDef *htim); +HAL_TIM_StateTypeDef HAL_TIM_PWM_GetState(TIM_HandleTypeDef *htim); +HAL_TIM_StateTypeDef HAL_TIM_IC_GetState(TIM_HandleTypeDef *htim); +HAL_TIM_StateTypeDef HAL_TIM_OnePulse_GetState(TIM_HandleTypeDef *htim); +HAL_TIM_StateTypeDef HAL_TIM_Encoder_GetState(TIM_HandleTypeDef *htim); + +void TIM_DMADelayPulseCplt(DMA_HandleTypeDef *hdma); +void TIM_DMAError(DMA_HandleTypeDef *hdma); +void TIM_DMACaptureCplt(DMA_HandleTypeDef *hdma); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32L1xx_HAL_TIM_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_tim_ex.h b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_tim_ex.h new file mode 100755 index 0000000..0bc7f11 --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_tim_ex.h @@ -0,0 +1,194 @@ +/** + ****************************************************************************** + * @file stm32l1xx_hal_tim_ex.h + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief Header file of TIM HAL Extension module. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L1xx_HAL_TIM_EX_H +#define __STM32L1xx_HAL_TIM_EX_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_hal_def.h" + +/** @addtogroup STM32L1xx_HAL_Driver + * @{ + */ + +/** @addtogroup TIMEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup TIMEx_Exported_Types TIMEx Exported Types + * @{ + */ + +/** + * @brief TIM Master configuration Structure definition + */ +typedef struct { + uint32_t MasterOutputTrigger; /*!< Trigger output (TRGO) selection + This parameter can be a value of @ref TIM_Master_Mode_Selection */ + uint32_t MasterSlaveMode; /*!< Master/slave mode selection + This parameter can be a value of @ref TIM_Master_Slave_Mode */ +}TIM_MasterConfigTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup TIMEx_Exported_Constants TIMEx Exported Constants + * @{ + */ + +/** @defgroup TIMEx_Remap TIMEx Remap + * @{ + */ + +#if defined (STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined (STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined (STM32L151xE) || defined (STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) +#define TIM_TIM2_ITR1_TIM10_OC (0x00000000) /*!< TIM2 ITR1 input is connected to TIM10 OC */ +#define TIM_TIM2_ITR1_TIM5_TGO TIM2_OR_ITR1_RMP /*!< TIM2 ITR1 input is connected to TIM5 TGO */ +#endif /* defined (STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined (STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined (STM32L151xE) || defined (STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) */ + +#if defined (STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined (STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined (STM32L151xE) || defined (STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) +#define TIM_TIM3_ITR2_TIM11_OC (0x00000000) /*!< TIM3 ITR2 input is connected to TIM11 OC */ +#define TIM_TIM3_ITR2_TIM5_TGO TIM2_OR_ITR1_RMP /*!< TIM3 ITR2 input is connected to TIM5 TGO */ +#endif /* defined (STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined (STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined (STM32L151xE) || defined (STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) */ + +#if defined (STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined (STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined (STM32L151xE) || defined (STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) +#define TIM_TIM9_ITR1_TIM3_TGO (0x00000000) /*!< TIM9 ITR1 input is connected to TIM3 TGO */ +#define TIM_TIM9_ITR1_TS TIM9_OR_ITR1_RMP /*!< TIM9 ITR1 input is connected to touch sensing I/O */ +#endif /* defined (STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined (STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined (STM32L151xE) || defined (STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) */ +#define TIM_TIM9_GPIO (0x00000000) /*!< TIM9 Channel1 is connected to GPIO */ +#define TIM_TIM9_LSE TIM_OR_TI1RMP_0 /*!< TIM9 Channel1 is connected to LSE internal clock */ +#define TIM_TIM9_GPIO1 TIM_OR_TI1RMP_1 /*!< TIM9 Channel1 is connected to GPIO */ +#define TIM_TIM9_GPIO2 TIM_OR_TI1RMP /*!< TIM9 Channel1 is connected to GPIO */ + + +#if defined (STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined (STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined (STM32L151xE) || defined (STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) +#define TIM_TIM10_TI1RMP (0x00000000) /*!< TIM10 Channel 1 depends on TI1_RMP */ +#define TIM_TIM10_RI TIM_OR_TI1_RMP_RI /*!< TIM10 Channel 1 is connected to RI */ +#define TIM_TIM10_ETR_LSE (0x00000000) /*!< TIM10 ETR input is connected to LSE clock */ +#define TIM_TIM10_ETR_TIM9_TGO TIM_OR_ETR_RMP /*!< TIM10 ETR input is connected to TIM9 TGO */ +#endif /* defined (STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined (STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined (STM32L151xE) || defined (STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) */ +#define TIM_TIM10_GPIO (0x00000000) /*!< TIM10 Channel1 is connected to GPIO */ +#define TIM_TIM10_LSI TIM_OR_TI1RMP_0 /*!< TIM10 Channel1 is connected to LSI internal clock */ +#define TIM_TIM10_LSE TIM_OR_TI1RMP_1 /*!< TIM10 Channel1 is connected to LSE internal clock */ +#define TIM_TIM10_RTC TIM_OR_TI1RMP /*!< TIM10 Channel1 is connected to RTC wakeup interrupt */ + +#if defined (STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined (STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined (STM32L151xE) || defined (STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) +#define TIM_TIM11_TI1RMP (0x00000000) /*!< TIM11 Channel 1 depends on TI1_RMP */ +#define TIM_TIM11_RI TIM_OR_TI1_RMP_RI /*!< TIM11 Channel 1 is connected to RI */ +#define TIM_TIM11_ETR_LSE (0x00000000) /*!< TIM11 ETR input is connected to LSE clock */ +#define TIM_TIM11_ETR_TIM9_TGO TIM_OR_ETR_RMP /*!< TIM11 ETR input is connected to TIM9 TGO */ +#endif /* defined (STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined (STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined (STM32L151xE) || defined (STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) */ +#define TIM_TIM11_GPIO (0x00000000) /*!< TIM11 Channel1 is connected to GPIO */ +#define TIM_TIM11_MSI TIM_OR_TI1RMP_0 /*!< TIM11 Channel1 is connected to MSI internal clock */ +#define TIM_TIM11_HSE_RTC TIM_OR_TI1RMP_1 /*!< TIM11 Channel1 is connected to HSE_RTC clock */ +#define TIM_TIM11_GPIO1 TIM_OR_TI1RMP /*!< TIM11 Channel1 is connected to GPIO */ + + +#if defined (STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined (STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined (STM32L151xE) || defined (STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) +#define IS_TIM_REMAP(INSTANCE, TIM_REMAP) \ + ( (((INSTANCE) == TIM2) && (((TIM_REMAP) == TIM_TIM2_ITR1_TIM10_OC) || ((TIM_REMAP) == TIM_TIM2_ITR1_TIM5_TGO))) || \ + (((INSTANCE) == TIM3) && (((TIM_REMAP) == TIM_TIM3_ITR2_TIM11_OC) || ((TIM_REMAP) == TIM_TIM3_ITR2_TIM5_TGO))) || \ + (((INSTANCE) == TIM9) && ((TIM_REMAP) <= (TIM_TIM9_ITR1_TS | TIM_TIM9_GPIO2))) || \ + (((INSTANCE) == TIM10) && ((TIM_REMAP) <= (TIM_TIM10_RI | TIM_TIM10_ETR_TIM9_TGO | TIM_TIM10_RTC))) || \ + (((INSTANCE) == TIM11) && ((TIM_REMAP) <= (TIM_TIM11_RI | TIM_TIM11_ETR_TIM9_TGO | TIM_TIM11_GPIO1))) \ + ) +#else /* defined (STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined (STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined (STM32L151xE) || defined (STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) */ +#define IS_TIM_REMAP(INSTANCE, TIM_REMAP) \ + ( (((INSTANCE) == TIM9) && (((TIM_REMAP) == TIM_TIM9_GPIO) || ((TIM_REMAP) == TIM_TIM9_LSE) || ((TIM_REMAP) == TIM_TIM9_GPIO1) || ((TIM_REMAP) == TIM_TIM9_GPIO2))) || \ + (((INSTANCE) == TIM10) && (((TIM_REMAP) == TIM_TIM10_GPIO) || ((TIM_REMAP) == TIM_TIM10_LSI) || ((TIM_REMAP) == TIM_TIM10_LSE) || ((TIM_REMAP) == TIM_TIM10_RTC))) || \ + (((INSTANCE) == TIM11) && (((TIM_REMAP) == TIM_TIM11_GPIO) || ((TIM_REMAP) == TIM_TIM11_MSI) || ((TIM_REMAP) == TIM_TIM11_HSE_RTC) || ((TIM_REMAP) == TIM_TIM11_GPIO1))) \ + ) +#endif + + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup TIMEx_Exported_Functions + * @{ + */ + +/** @addtogroup TIMEx_Exported_Functions_Group1 + * @{ + */ +/* Extension Control functions ************************************************/ +HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim, TIM_MasterConfigTypeDef * sMasterConfig); +HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap); +/** + * @} + */ + +/* Extension Peripheral State functions **************************************/ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + + +#endif /* __STM32L1xx_HAL_TIM_EX_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_uart.h b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_uart.h new file mode 100755 index 0000000..2c7cf9f --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_uart.h @@ -0,0 +1,767 @@ +/** + ****************************************************************************** + * @file stm32l1xx_hal_uart.h + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief This file contains all the functions prototypes for the UART + * firmware library. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L1xx_HAL_UART_H +#define __STM32L1xx_HAL_UART_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_hal_def.h" + +/** @addtogroup STM32L1xx_HAL_Driver + * @{ + */ + +/** @addtogroup UART + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup UART_Exported_Types UART Exported Types + * @{ + */ + + +/** + * @brief UART Init Structure definition + */ +typedef struct +{ + uint32_t BaudRate; /*!< This member configures the UART communication baud rate. + The baud rate is computed using the following formula: + - IntegerDivider = ((PCLKx) / (8 * (OVR8+1) * (huart->Init.BaudRate))) + - FractionalDivider = ((IntegerDivider - ((uint32_t) IntegerDivider)) * 8 * (OVR8+1)) + 0.5 + Where OVR8 is the "oversampling by 8 mode" configuration bit in the CR1 register. */ + + uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame. + This parameter can be a value of @ref UART_Word_Length */ + + uint32_t StopBits; /*!< Specifies the number of stop bits transmitted. + This parameter can be a value of @ref UART_Stop_Bits */ + + uint32_t Parity; /*!< Specifies the parity mode. + This parameter can be a value of @ref UART_Parity + @note When parity is enabled, the computed parity is inserted + at the MSB position of the transmitted data (9th bit when + the word length is set to 9 data bits; 8th bit when the + word length is set to 8 data bits). */ + + uint32_t Mode; /*!< Specifies wether the Receive or Transmit mode is enabled or disabled. + This parameter can be a value of @ref UART_Mode */ + + uint32_t HwFlowCtl; /*!< Specifies wether the hardware flow control mode is enabled + or disabled. + This parameter can be a value of @ref UART_Hardware_Flow_Control */ + + uint32_t OverSampling; /*!< Specifies wether the Over sampling 8 is enabled or disabled, to achieve higher speed (up to fPCLK/8). + This parameter can be a value of @ref UART_Over_Sampling */ +}UART_InitTypeDef; + +/** + * @brief HAL UART State structures definition + */ +typedef enum +{ + HAL_UART_STATE_RESET = 0x00, /*!< Peripheral is not initialized */ + HAL_UART_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */ + HAL_UART_STATE_BUSY = 0x02, /*!< an internal process is ongoing */ + HAL_UART_STATE_BUSY_TX = 0x12, /*!< Data Transmission process is ongoing */ + HAL_UART_STATE_BUSY_RX = 0x22, /*!< Data Reception process is ongoing */ + HAL_UART_STATE_BUSY_TX_RX = 0x32, /*!< Data Transmission and Reception process is ongoing */ + HAL_UART_STATE_TIMEOUT = 0x03, /*!< Timeout state */ + HAL_UART_STATE_ERROR = 0x04 /*!< Error */ +}HAL_UART_StateTypeDef; + +/** + * @brief UART handle Structure definition + */ +typedef struct +{ + USART_TypeDef *Instance; /*!< UART registers base address */ + + UART_InitTypeDef Init; /*!< UART communication parameters */ + + uint8_t *pTxBuffPtr; /*!< Pointer to UART Tx transfer Buffer */ + + uint16_t TxXferSize; /*!< UART Tx Transfer size */ + + uint16_t TxXferCount; /*!< UART Tx Transfer Counter */ + + uint8_t *pRxBuffPtr; /*!< Pointer to UART Rx transfer Buffer */ + + uint16_t RxXferSize; /*!< UART Rx Transfer size */ + + uint16_t RxXferCount; /*!< UART Rx Transfer Counter */ + + DMA_HandleTypeDef *hdmatx; /*!< UART Tx DMA Handle parameters */ + + DMA_HandleTypeDef *hdmarx; /*!< UART Rx DMA Handle parameters */ + + HAL_LockTypeDef Lock; /*!< Locking object */ + + __IO HAL_UART_StateTypeDef State; /*!< UART communication state */ + + __IO uint32_t ErrorCode; /*!< UART Error code */ + +}UART_HandleTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup UART_Exported_Constants UART Exported constants + * @{ + */ + +/** @defgroup UART_Error_Codes UART Error Codes + * @{ + */ + +#define HAL_UART_ERROR_NONE ((uint32_t)0x00) /*!< No error */ +#define HAL_UART_ERROR_PE ((uint32_t)0x01) /*!< Parity error */ +#define HAL_UART_ERROR_NE ((uint32_t)0x02) /*!< Noise error */ +#define HAL_UART_ERROR_FE ((uint32_t)0x04) /*!< frame error */ +#define HAL_UART_ERROR_ORE ((uint32_t)0x08) /*!< Overrun error */ +#define HAL_UART_ERROR_DMA ((uint32_t)0x10) /*!< DMA transfer error */ + +/** + * @} + */ + +/** @defgroup UART_Word_Length UART Word Length + * @{ + */ +#define UART_WORDLENGTH_8B ((uint32_t)0x00000000) +#define UART_WORDLENGTH_9B ((uint32_t)USART_CR1_M) +/** + * @} + */ + +/** @defgroup UART_Stop_Bits UART Number of Stop Bits + * @{ + */ +#define UART_STOPBITS_1 ((uint32_t)0x00000000) +#define UART_STOPBITS_2 ((uint32_t)USART_CR2_STOP_1) +/** + * @} + */ + +/** @defgroup UART_Parity UART Parity + * @{ + */ +#define UART_PARITY_NONE ((uint32_t)0x00000000) +#define UART_PARITY_EVEN ((uint32_t)USART_CR1_PCE) +#define UART_PARITY_ODD ((uint32_t)(USART_CR1_PCE | USART_CR1_PS)) +/** + * @} + */ + +/** @defgroup UART_Hardware_Flow_Control UART Hardware Flow Control + * @{ + */ +#define UART_HWCONTROL_NONE ((uint32_t)0x00000000) +#define UART_HWCONTROL_RTS ((uint32_t)USART_CR3_RTSE) +#define UART_HWCONTROL_CTS ((uint32_t)USART_CR3_CTSE) +#define UART_HWCONTROL_RTS_CTS ((uint32_t)(USART_CR3_RTSE | USART_CR3_CTSE)) +/** + * @} + */ + +/** @defgroup UART_Mode UART Transfer Mode + * @{ + */ +#define UART_MODE_RX ((uint32_t)USART_CR1_RE) +#define UART_MODE_TX ((uint32_t)USART_CR1_TE) +#define UART_MODE_TX_RX ((uint32_t)(USART_CR1_TE |USART_CR1_RE)) + +/** + * @} + */ + + /** @defgroup UART_State UART State + * @{ + */ +#define UART_STATE_DISABLE ((uint32_t)0x00000000) +#define UART_STATE_ENABLE ((uint32_t)USART_CR1_UE) +/** + * @} + */ + +/** @defgroup UART_Over_Sampling UART Over Sampling + * @{ + */ +#define UART_OVERSAMPLING_16 ((uint32_t)0x00000000) +#define UART_OVERSAMPLING_8 ((uint32_t)USART_CR1_OVER8) +/** + * @} + */ + +/** @defgroup UART_LIN_Break_Detection_Length UART LIN Break Detection Length + * @{ + */ +#define UART_LINBREAKDETECTLENGTH_10B ((uint32_t)0x00000000) +#define UART_LINBREAKDETECTLENGTH_11B ((uint32_t)USART_CR2_LBDL) +/** + * @} + */ + +/** @defgroup UART_WakeUp_functions UART Wakeup Functions + * @{ + */ +#define UART_WAKEUPMETHOD_IDLELINE ((uint32_t)0x00000000) +#define UART_WAKEUPMETHOD_ADDRESSMARK ((uint32_t)USART_CR1_WAKE) +/** + * @} + */ + +/** @defgroup UART_Flags UART FLags + * Elements values convention: 0xXXXX + * - 0xXXXX : Flag mask in the SR register + * @{ + */ +#define UART_FLAG_CTS ((uint32_t)USART_SR_CTS) +#define UART_FLAG_LBD ((uint32_t)USART_SR_LBD) +#define UART_FLAG_TXE ((uint32_t)USART_SR_TXE) +#define UART_FLAG_TC ((uint32_t)USART_SR_TC) +#define UART_FLAG_RXNE ((uint32_t)USART_SR_RXNE) +#define UART_FLAG_IDLE ((uint32_t)USART_SR_IDLE) +#define UART_FLAG_ORE ((uint32_t)USART_SR_ORE) +#define UART_FLAG_NE ((uint32_t)USART_SR_NE) +#define UART_FLAG_FE ((uint32_t)USART_SR_FE) +#define UART_FLAG_PE ((uint32_t)USART_SR_PE) +/** + * @} + */ + +/** @defgroup UART_Interrupt_definition UART Interrupt Definitions + * Elements values convention: 0xY000XXXX + * - XXXX : Interrupt mask (16 bits) in the Y register + * - Y : Interrupt source register (2bits) + * - 0001: CR1 register + * - 0010: CR2 register + * - 0011: CR3 register + * + * @{ + */ + +#define UART_IT_PE ((uint32_t)(UART_CR1_REG_INDEX << 28 | USART_CR1_PEIE)) +#define UART_IT_TXE ((uint32_t)(UART_CR1_REG_INDEX << 28 | USART_CR1_TXEIE)) +#define UART_IT_TC ((uint32_t)(UART_CR1_REG_INDEX << 28 | USART_CR1_TCIE)) +#define UART_IT_RXNE ((uint32_t)(UART_CR1_REG_INDEX << 28 | USART_CR1_RXNEIE)) +#define UART_IT_IDLE ((uint32_t)(UART_CR1_REG_INDEX << 28 | USART_CR1_IDLEIE)) + +#define UART_IT_LBD ((uint32_t)(UART_CR2_REG_INDEX << 28 | USART_CR2_LBDIE)) + +#define UART_IT_CTS ((uint32_t)(UART_CR3_REG_INDEX << 28 | USART_CR3_CTSIE)) +#define UART_IT_ERR ((uint32_t)(UART_CR3_REG_INDEX << 28 | USART_CR3_EIE)) + +/** + * @} + */ + +/** + * @} + */ + + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup UART_Exported_Macros UART Exported Macros + * @{ + */ + + +/** @brief Reset UART handle state + * @param __HANDLE__: specifies the UART Handle. + * UART Handle selects the USARTx or UARTy peripheral + * (USART,UART availability and x,y values depending on device). + * @retval None + */ +#define __HAL_UART_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_UART_STATE_RESET) + +/** @brief Flush the UART DR register + * @param __HANDLE__: specifies the UART Handle. + * UART Handle selects the USARTx or UARTy peripheral + * (USART,UART availability and x,y values depending on device). + */ +#define __HAL_UART_FLUSH_DRREGISTER(__HANDLE__) ((__HANDLE__)->Instance->DR) + +/** @brief Check whether the specified UART flag is set or not. + * @param __HANDLE__: specifies the UART Handle. + * UART Handle selects the USARTx or UARTy peripheral + * (USART,UART availability and x,y values depending on device). + * @param __FLAG__: specifies the flag to check. + * This parameter can be one of the following values: + * @arg UART_FLAG_CTS: CTS Change flag (not available for UART4 and UART5) + * @arg UART_FLAG_LBD: LIN Break detection flag + * @arg UART_FLAG_TXE: Transmit data register empty flag + * @arg UART_FLAG_TC: Transmission Complete flag + * @arg UART_FLAG_RXNE: Receive data register not empty flag + * @arg UART_FLAG_IDLE: Idle Line detection flag + * @arg UART_FLAG_ORE: OverRun Error flag + * @arg UART_FLAG_NE: Noise Error flag + * @arg UART_FLAG_FE: Framing Error flag + * @arg UART_FLAG_PE: Parity Error flag + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_UART_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__)) + +/** @brief Clear the specified UART pending flag. + * @param __HANDLE__: specifies the UART Handle. + * UART Handle selects the USARTx or UARTy peripheral + * (USART,UART availability and x,y values depending on device). + * @param __FLAG__: specifies the flag to check. + * This parameter can be any combination of the following values: + * @arg UART_FLAG_CTS: CTS Change flag (not available for UART4 and UART5). + * @arg UART_FLAG_LBD: LIN Break detection flag. + * @arg UART_FLAG_TC: Transmission Complete flag. + * @arg UART_FLAG_RXNE: Receive data register not empty flag. + * + * @note PE (Parity error), FE (Framing error), NE (Noise error), ORE (OverRun + * error) and IDLE (Idle line detected) flags are cleared by software + * sequence: a read operation to USART_SR register followed by a read + * operation to USART_DR register. + * @note RXNE flag can be also cleared by a read to the USART_DR register. + * @note TC flag can be also cleared by software sequence: a read operation to + * USART_SR register followed by a write operation to USART_DR register. + * @note TXE flag is cleared only by a write to the USART_DR register. + * + * @retval None + */ +#define __HAL_UART_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__)) + +/** @brief Clear the UART PE pending flag. + * @param __HANDLE__: specifies the UART Handle. + * UART Handle selects the USARTx or UARTy peripheral + * (USART,UART availability and x,y values depending on device). + * @retval None + */ +#define __HAL_UART_CLEAR_PEFLAG(__HANDLE__) \ +do{ \ + __IO uint32_t tmpreg; \ + tmpreg = (__HANDLE__)->Instance->SR; \ + tmpreg = (__HANDLE__)->Instance->DR; \ + UNUSED(tmpreg); \ +}while(0) + + + +/** @brief Clear the UART FE pending flag. + * @param __HANDLE__: specifies the UART Handle. + * UART Handle selects the USARTx or UARTy peripheral + * (USART,UART availability and x,y values depending on device). + * @retval None + */ +#define __HAL_UART_CLEAR_FEFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__) + +/** @brief Clear the UART NE pending flag. + * @param __HANDLE__: specifies the UART Handle. + * UART Handle selects the USARTx or UARTy peripheral + * (USART,UART availability and x,y values depending on device). + * @retval None + */ +#define __HAL_UART_CLEAR_NEFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__) + +/** @brief Clear the UART ORE pending flag. + * @param __HANDLE__: specifies the UART Handle. + * UART Handle selects the USARTx or UARTy peripheral + * (USART,UART availability and x,y values depending on device). + * @retval None + */ +#define __HAL_UART_CLEAR_OREFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__) + +/** @brief Clear the UART IDLE pending flag. + * @param __HANDLE__: specifies the UART Handle. + * UART Handle selects the USARTx or UARTy peripheral + * (USART,UART availability and x,y values depending on device). + * @retval None + */ +#define __HAL_UART_CLEAR_IDLEFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__) + +/** @brief Enable the specified UART interrupt. + * @param __HANDLE__: specifies the UART Handle. + * UART Handle selects the USARTx or UARTy peripheral + * (USART,UART availability and x,y values depending on device). + * @param __INTERRUPT__: specifies the UART interrupt source to enable. + * This parameter can be one of the following values: + * @arg UART_IT_CTS: CTS change interrupt + * @arg UART_IT_LBD: LIN Break detection interrupt + * @arg UART_IT_TXE: Transmit Data Register empty interrupt + * @arg UART_IT_TC: Transmission complete interrupt + * @arg UART_IT_RXNE: Receive Data register not empty interrupt + * @arg UART_IT_IDLE: Idle line detection interrupt + * @arg UART_IT_PE: Parity Error interrupt + * @arg UART_IT_ERR: Error interrupt(Frame error, noise error, overrun error) + * @retval None + */ +#define __HAL_UART_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28) == UART_CR1_REG_INDEX)? ((__HANDLE__)->Instance->CR1 |= ((__INTERRUPT__) & UART_IT_MASK)): \ + (((__INTERRUPT__) >> 28) == UART_CR2_REG_INDEX)? ((__HANDLE__)->Instance->CR2 |= ((__INTERRUPT__) & UART_IT_MASK)): \ + ((__HANDLE__)->Instance->CR3 |= ((__INTERRUPT__) & UART_IT_MASK))) + + +/** @brief Disable the specified UART interrupt. + * @param __HANDLE__: specifies the UART Handle. + * UART Handle selects the USARTx or UARTy peripheral + * (USART,UART availability and x,y values depending on device). + * @param __INTERRUPT__: specifies the UART interrupt source to disable. + * This parameter can be one of the following values: + * @arg UART_IT_CTS: CTS change interrupt + * @arg UART_IT_LBD: LIN Break detection interrupt + * @arg UART_IT_TXE: Transmit Data Register empty interrupt + * @arg UART_IT_TC: Transmission complete interrupt + * @arg UART_IT_RXNE: Receive Data register not empty interrupt + * @arg UART_IT_IDLE: Idle line detection interrupt + * @arg UART_IT_PE: Parity Error interrupt + * @arg UART_IT_ERR: Error interrupt(Frame error, noise error, overrun error) + * @retval None + */ +#define __HAL_UART_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28) == UART_CR1_REG_INDEX)? ((__HANDLE__)->Instance->CR1 &= ~((__INTERRUPT__) & UART_IT_MASK)): \ + (((__INTERRUPT__) >> 28) == UART_CR2_REG_INDEX)? ((__HANDLE__)->Instance->CR2 &= ~((__INTERRUPT__) & UART_IT_MASK)): \ + ((__HANDLE__)->Instance->CR3 &= ~ ((__INTERRUPT__) & UART_IT_MASK))) + +/** @brief Check whether the specified UART interrupt has occurred or not. + * @param __HANDLE__: specifies the UART Handle. + * UART Handle selects the USARTx or UARTy peripheral + * (USART,UART availability and x,y values depending on device). + * @param __IT__: specifies the UART interrupt source to check. + * This parameter can be one of the following values: + * @arg UART_IT_CTS: CTS change interrupt (not available for UART4 and UART5) + * @arg UART_IT_LBD: LIN Break detection interrupt + * @arg UART_IT_TXE: Transmit Data Register empty interrupt + * @arg UART_IT_TC: Transmission complete interrupt + * @arg UART_IT_RXNE: Receive Data register not empty interrupt + * @arg UART_IT_IDLE: Idle line detection interrupt + * @arg UART_IT_ERR: Error interrupt + * @retval The new state of __IT__ (TRUE or FALSE). + */ +#define __HAL_UART_GET_IT_SOURCE(__HANDLE__, __IT__) (((((__IT__) >> 28) == UART_CR1_REG_INDEX)? (__HANDLE__)->Instance->CR1:(((((uint32_t)(__IT__)) >> 28) == UART_CR2_REG_INDEX)? \ + (__HANDLE__)->Instance->CR2 : (__HANDLE__)->Instance->CR3)) & (((uint32_t)(__IT__)) & UART_IT_MASK)) + +/** @brief macros to enables or disables the UART's one bit sampling method + * @param __HANDLE__: specifies the UART Handle. + * This parameter can be USARTx with x: 1, 2 or 3, or UARTy with y:4 or 5 to select the USART or + * UART peripheral (availability depending on device for UARTy). + * @retval None + */ +#define __HAL_UART_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3|= USART_CR3_ONEBIT) +#define __HAL_UART_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3 &= (uint16_t)~((uint16_t)USART_CR3_ONEBIT)) + +/** @brief Enable CTS flow control + * This macro allows to enable CTS hardware flow control for a given UART instance, + * without need to call HAL_UART_Init() function. + * As involving direct access to UART registers, usage of this macro should be fully endorsed by user. + * @note As macro is expected to be used for modifying CTS Hw flow control feature activation, without need + * for USART instance Deinit/Init, following conditions for macro call should be fulfilled : + * - UART instance should have already been initialised (through call of HAL_UART_Init() ) + * - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__)) + * and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)). + * @param __HANDLE__: specifies the UART Handle. + * This parameter can be any USARTx (supporting the HW Flow control feature). + * It is used to select the USART peripheral (USART availability and x value depending on device). + * @retval None + */ +#define __HAL_UART_HWCONTROL_CTS_ENABLE(__HANDLE__) \ + do{ \ + SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \ + (__HANDLE__)->Init.HwFlowCtl |= USART_CR3_CTSE; \ + } while(0) + +/** @brief Disable CTS flow control + * This macro allows to disable CTS hardware flow control for a given UART instance, + * without need to call HAL_UART_Init() function. + * As involving direct access to UART registers, usage of this macro should be fully endorsed by user. + * @note As macro is expected to be used for modifying CTS Hw flow control feature activation, without need + * for USART instance Deinit/Init, following conditions for macro call should be fulfilled : + * - UART instance should have already been initialised (through call of HAL_UART_Init() ) + * - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__)) + * and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)). + * @param __HANDLE__: specifies the UART Handle. + * This parameter can be any USARTx (supporting the HW Flow control feature). + * It is used to select the USART peripheral (USART availability and x value depending on device). + * @retval None + */ +#define __HAL_UART_HWCONTROL_CTS_DISABLE(__HANDLE__) \ + do{ \ + CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \ + (__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_CTSE); \ + } while(0) + +/** @brief Enable RTS flow control + * This macro allows to enable RTS hardware flow control for a given UART instance, + * without need to call HAL_UART_Init() function. + * As involving direct access to UART registers, usage of this macro should be fully endorsed by user. + * @note As macro is expected to be used for modifying RTS Hw flow control feature activation, without need + * for USART instance Deinit/Init, following conditions for macro call should be fulfilled : + * - UART instance should have already been initialised (through call of HAL_UART_Init() ) + * - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__)) + * and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)). + * @param __HANDLE__: specifies the UART Handle. + * This parameter can be any USARTx (supporting the HW Flow control feature). + * It is used to select the USART peripheral (USART availability and x value depending on device). + * @retval None + */ +#define __HAL_UART_HWCONTROL_RTS_ENABLE(__HANDLE__) \ + do{ \ + SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE); \ + (__HANDLE__)->Init.HwFlowCtl |= USART_CR3_RTSE; \ + } while(0) + +/** @brief Disable RTS flow control + * This macro allows to disable RTS hardware flow control for a given UART instance, + * without need to call HAL_UART_Init() function. + * As involving direct access to UART registers, usage of this macro should be fully endorsed by user. + * @note As macro is expected to be used for modifying RTS Hw flow control feature activation, without need + * for USART instance Deinit/Init, following conditions for macro call should be fulfilled : + * - UART instance should have already been initialised (through call of HAL_UART_Init() ) + * - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__)) + * and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)). + * @param __HANDLE__: specifies the UART Handle. + * This parameter can be any USARTx (supporting the HW Flow control feature). + * It is used to select the USART peripheral (USART availability and x value depending on device). + * @retval None + */ +#define __HAL_UART_HWCONTROL_RTS_DISABLE(__HANDLE__) \ + do{ \ + CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE);\ + (__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_RTSE); \ + } while(0) + + +/** @brief Enable UART + * @param __HANDLE__: specifies the UART Handle. + * UART Handle selects the USARTx or UARTy peripheral + * (USART,UART availability and x,y values depending on device). + * @retval None + */ +#define __HAL_UART_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE) + +/** @brief Disable UART + * UART Handle selects the USARTx or UARTy peripheral + * (USART,UART availability and x,y values depending on device). + * @retval None + */ +#define __HAL_UART_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE) + +/** + * @} + */ + + +/* Private macros --------------------------------------------------------*/ +/** @defgroup UART_Private_Macros UART Private Macros + * @{ + */ + +#define UART_CR1_REG_INDEX 1 +#define UART_CR2_REG_INDEX 2 +#define UART_CR3_REG_INDEX 3 + +#define UART_DIV_SAMPLING16(_PCLK_, _BAUD_) (((_PCLK_)*25)/(4*(_BAUD_))) +#define UART_DIVMANT_SAMPLING16(_PCLK_, _BAUD_) (UART_DIV_SAMPLING16((_PCLK_), (_BAUD_))/100) +#define UART_DIVFRAQ_SAMPLING16(_PCLK_, _BAUD_) (((UART_DIV_SAMPLING16((_PCLK_), (_BAUD_)) - (UART_DIVMANT_SAMPLING16((_PCLK_), (_BAUD_)) * 100)) * 16 + 50) / 100) +/* UART BRR = mantissa + overflow + fraction + = (UART DIVMANT << 4) + (UART DIVFRAQ & 0xF0) + (UART DIVFRAQ & 0x0F) */ +#define UART_BRR_SAMPLING16(_PCLK_, _BAUD_) (((UART_DIVMANT_SAMPLING16((_PCLK_), (_BAUD_)) << 4) + \ + (UART_DIVFRAQ_SAMPLING16((_PCLK_), (_BAUD_)) & 0xF0)) + \ + (UART_DIVFRAQ_SAMPLING16((_PCLK_), (_BAUD_)) & 0x0F)) +#define UART_DIV_SAMPLING8(_PCLK_, _BAUD_) (((_PCLK_)*25)/(2*(_BAUD_))) +#define UART_DIVMANT_SAMPLING8(_PCLK_, _BAUD_) (UART_DIV_SAMPLING8((_PCLK_), (_BAUD_))/100) +#define UART_DIVFRAQ_SAMPLING8(_PCLK_, _BAUD_) (((UART_DIV_SAMPLING8((_PCLK_), (_BAUD_)) - (UART_DIVMANT_SAMPLING8((_PCLK_), (_BAUD_)) * 100)) * 8 + 50) / 100) +/* UART BRR = mantissa + overflow + fraction + = (UART DIVMANT << 4) + ((UART DIVFRAQ & 0xF8) << 1) + (UART DIVFRAQ & 0x07) */ +#define UART_BRR_SAMPLING8(_PCLK_, _BAUD_) (((UART_DIVMANT_SAMPLING8((_PCLK_), (_BAUD_)) << 4) + \ + ((UART_DIVFRAQ_SAMPLING8((_PCLK_), (_BAUD_)) & 0xF8) << 1)) + \ + (UART_DIVFRAQ_SAMPLING8((_PCLK_), (_BAUD_)) & 0x07)) +#define IS_UART_WORD_LENGTH(LENGTH) (((LENGTH) == UART_WORDLENGTH_8B) || \ + ((LENGTH) == UART_WORDLENGTH_9B)) +#define IS_UART_LIN_WORD_LENGTH(LENGTH) ((LENGTH) == UART_WORDLENGTH_8B) + +#define IS_UART_STOPBITS(STOPBITS) (((STOPBITS) == UART_STOPBITS_1) || \ + ((STOPBITS) == UART_STOPBITS_2)) + +#define IS_UART_PARITY(PARITY) (((PARITY) == UART_PARITY_NONE) || \ + ((PARITY) == UART_PARITY_EVEN) || \ + ((PARITY) == UART_PARITY_ODD)) + +#define IS_UART_HARDWARE_FLOW_CONTROL(CONTROL)\ + (((CONTROL) == UART_HWCONTROL_NONE) || \ + ((CONTROL) == UART_HWCONTROL_RTS) || \ + ((CONTROL) == UART_HWCONTROL_CTS) || \ + ((CONTROL) == UART_HWCONTROL_RTS_CTS)) + +#define IS_UART_MODE(MODE) ((((MODE) & (~((uint32_t)UART_MODE_TX_RX))) == 0x00) && \ + ((MODE) != (uint32_t)0x00000000)) + +#define IS_UART_STATE(STATE) (((STATE) == UART_STATE_DISABLE) || \ + ((STATE) == UART_STATE_ENABLE)) + +#define IS_UART_OVERSAMPLING(SAMPLING) (((SAMPLING) == UART_OVERSAMPLING_16) || \ + ((SAMPLING) == UART_OVERSAMPLING_8)) +#define IS_UART_LIN_OVERSAMPLING(SAMPLING) ((SAMPLING) == UART_OVERSAMPLING_16) + +#define IS_UART_LIN_BREAK_DETECT_LENGTH(LENGTH) (((LENGTH) == UART_LINBREAKDETECTLENGTH_10B) || \ + ((LENGTH) == UART_LINBREAKDETECTLENGTH_11B)) + +#define IS_UART_WAKEUPMETHOD(WAKEUP) (((WAKEUP) == UART_WAKEUPMETHOD_IDLELINE) || \ + ((WAKEUP) == UART_WAKEUPMETHOD_ADDRESSMARK)) + + +/** Check UART Baud rate + * __BAUDRATE__: Baudrate specified by the user + * The maximum Baud Rate is derived from the maximum clock on APB (i.e. 32 MHz) + * divided by the smallest oversampling used on the USART (i.e. 8) + * Return : TRUE or FALSE + */ +#define IS_UART_BAUDRATE(__BAUDRATE__) ((__BAUDRATE__) < 4000001) + +/** Check UART Node Address + * __ADDRESS__: UART Node address specified by the user + * UART Node address is used in Multi processor communication for wakeup + * with address mark detection. + * This parameter must be a number between Min_Data = 0 and Max_Data = 15 + * Return : TRUE or FALSE + */ +#define IS_UART_ADDRESS(__ADDRESS__) ((__ADDRESS__) <= 0xF) + +/** UART interruptions flag mask + */ +#define UART_IT_MASK ((uint32_t) USART_CR1_PEIE | USART_CR1_TXEIE | USART_CR1_TCIE | USART_CR1_RXNEIE | \ + USART_CR1_IDLEIE | USART_CR2_LBDIE | USART_CR3_CTSIE | USART_CR3_EIE ) + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup UART_Exported_Functions UART Exported Functions + * @{ + */ + +/** @addtogroup UART_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ + +/* Initialization and de-initialization functions ****************************/ +HAL_StatusTypeDef HAL_UART_Init(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_HalfDuplex_Init(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLength); +HAL_StatusTypeDef HAL_MultiProcessor_Init(UART_HandleTypeDef *huart, uint8_t Address, uint32_t WakeUpMethod); +HAL_StatusTypeDef HAL_UART_DeInit (UART_HandleTypeDef *huart); +void HAL_UART_MspInit(UART_HandleTypeDef *huart); +void HAL_UART_MspDeInit(UART_HandleTypeDef *huart); + +/** + * @} + */ + +/** @addtogroup UART_Exported_Functions_Group2 IO operation functions + * @{ + */ + +/* IO operation functions *****************************************************/ +HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_UART_Receive(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_UART_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_UART_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_UART_DMAPause(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_DMAResume(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_DMAStop(UART_HandleTypeDef *huart); +void HAL_UART_IRQHandler(UART_HandleTypeDef *huart); +void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart); +void HAL_UART_TxHalfCpltCallback(UART_HandleTypeDef *huart); +void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart); +void HAL_UART_RxHalfCpltCallback(UART_HandleTypeDef *huart); +void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart); + +/** + * @} + */ + +/** @addtogroup UART_Exported_Functions_Group3 Peripheral Control functions + * @{ + */ + +/* Peripheral Control functions ************************************************/ +HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_MultiProcessor_EnterMuteMode(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_MultiProcessor_ExitMuteMode(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_HalfDuplex_EnableTransmitter(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_HalfDuplex_EnableReceiver(UART_HandleTypeDef *huart); + +/** + * @} + */ + +/** @addtogroup UART_Exported_Functions_Group4 Peripheral State and Errors functions + * @{ + */ + +/* Peripheral State and Errors functions **************************************************/ +HAL_UART_StateTypeDef HAL_UART_GetState(UART_HandleTypeDef *huart); +uint32_t HAL_UART_GetError(UART_HandleTypeDef *huart); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32L1xx_HAL_UART_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_usart.h b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_usart.h new file mode 100755 index 0000000..44fef10 --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_usart.h @@ -0,0 +1,630 @@ +/** + ****************************************************************************** + * @file stm32l1xx_hal_usart.h + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief This file contains all the functions prototypes for the USART + * firmware library. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L1xx_HAL_USART_H +#define __STM32L1xx_HAL_USART_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_hal_def.h" + +/** @addtogroup STM32L1xx_HAL_Driver + * @{ + */ + +/** @addtogroup USART + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup USART_Exported_Types USART Exported Types + * @{ + */ + + +/** + * @brief USART Init Structure definition + */ +typedef struct +{ + uint32_t BaudRate; /*!< This member configures the Usart communication baud rate. + The baud rate is computed using the following formula: + - IntegerDivider = ((PCLKx) / (8 * (husart->Init.BaudRate))) + - FractionalDivider = ((IntegerDivider - ((uint32_t) IntegerDivider)) * 8) + 0.5 */ + + uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame. + This parameter can be a value of @ref USART_Word_Length */ + + uint32_t StopBits; /*!< Specifies the number of stop bits transmitted. + This parameter can be a value of @ref USART_Stop_Bits */ + + uint32_t Parity; /*!< Specifies the parity mode. + This parameter can be a value of @ref USART_Parity + @note When parity is enabled, the computed parity is inserted + at the MSB position of the transmitted data (9th bit when + the word length is set to 9 data bits; 8th bit when the + word length is set to 8 data bits). */ + + uint32_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled. + This parameter can be a value of @ref USART_Mode */ + + uint32_t CLKPolarity; /*!< Specifies the steady state of the serial clock. + This parameter can be a value of @ref USART_Clock_Polarity */ + + uint32_t CLKPhase; /*!< Specifies the clock transition on which the bit capture is made. + This parameter can be a value of @ref USART_Clock_Phase */ + + uint32_t CLKLastBit; /*!< Specifies whether the clock pulse corresponding to the last transmitted + data bit (MSB) has to be output on the SCLK pin in synchronous mode. + This parameter can be a value of @ref USART_Last_Bit */ +}USART_InitTypeDef; + +/** + * @brief HAL State structures definition + */ +typedef enum +{ + HAL_USART_STATE_RESET = 0x00, /*!< Peripheral is not initialized */ + HAL_USART_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */ + HAL_USART_STATE_BUSY = 0x02, /*!< an internal process is ongoing */ + HAL_USART_STATE_BUSY_TX = 0x12, /*!< Data Transmission process is ongoing */ + HAL_USART_STATE_BUSY_RX = 0x22, /*!< Data Reception process is ongoing */ + HAL_USART_STATE_BUSY_TX_RX = 0x32, /*!< Data Transmission Reception process is ongoing */ + HAL_USART_STATE_TIMEOUT = 0x03, /*!< Timeout state */ + HAL_USART_STATE_ERROR = 0x04 /*!< Error */ +}HAL_USART_StateTypeDef; + + +/** + * @brief USART handle Structure definition + */ +typedef struct +{ + USART_TypeDef *Instance; /*!< USART registers base address */ + + USART_InitTypeDef Init; /*!< Usart communication parameters */ + + uint8_t *pTxBuffPtr; /*!< Pointer to Usart Tx transfer Buffer */ + + uint16_t TxXferSize; /*!< Usart Tx Transfer size */ + + __IO uint16_t TxXferCount; /*!< Usart Tx Transfer Counter */ + + uint8_t *pRxBuffPtr; /*!< Pointer to Usart Rx transfer Buffer */ + + uint16_t RxXferSize; /*!< Usart Rx Transfer size */ + + __IO uint16_t RxXferCount; /*!< Usart Rx Transfer Counter */ + + DMA_HandleTypeDef *hdmatx; /*!< Usart Tx DMA Handle parameters */ + + DMA_HandleTypeDef *hdmarx; /*!< Usart Rx DMA Handle parameters */ + + HAL_LockTypeDef Lock; /*!< Locking object */ + + __IO HAL_USART_StateTypeDef State; /*!< Usart communication state */ + + __IO uint32_t ErrorCode; /*!< USART Error code */ + +}USART_HandleTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup USART_Exported_Constants USART Exported constants + * @{ + */ + +/** @defgroup USART_Error_Codes USART Error Codes + * @{ + */ +#define HAL_USART_ERROR_NONE ((uint32_t)0x00) /*!< No error */ +#define HAL_USART_ERROR_PE ((uint32_t)0x01) /*!< Parity error */ +#define HAL_USART_ERROR_NE ((uint32_t)0x02) /*!< Noise error */ +#define HAL_USART_ERROR_FE ((uint32_t)0x04) /*!< frame error */ +#define HAL_USART_ERROR_ORE ((uint32_t)0x08) /*!< Overrun error */ +#define HAL_USART_ERROR_DMA ((uint32_t)0x10) /*!< DMA transfer error */ +/** + * @} + */ + +/** @defgroup USART_Word_Length USART Word Length + * @{ + */ +#define USART_WORDLENGTH_8B ((uint32_t)0x00000000) +#define USART_WORDLENGTH_9B ((uint32_t)USART_CR1_M) +/** + * @} + */ + +/** @defgroup USART_Stop_Bits USART Number of Stop Bits + * @{ + */ +#define USART_STOPBITS_1 ((uint32_t)0x00000000) +#define USART_STOPBITS_0_5 ((uint32_t)USART_CR2_STOP_0) +#define USART_STOPBITS_2 ((uint32_t)USART_CR2_STOP_1) +#define USART_STOPBITS_1_5 ((uint32_t)(USART_CR2_STOP_0 | USART_CR2_STOP_1)) +/** + * @} + */ + +/** @defgroup USART_Parity USART Parity + * @{ + */ +#define USART_PARITY_NONE ((uint32_t)0x00000000) +#define USART_PARITY_EVEN ((uint32_t)USART_CR1_PCE) +#define USART_PARITY_ODD ((uint32_t)(USART_CR1_PCE | USART_CR1_PS)) +/** + * @} + */ + +/** @defgroup USART_Mode USART Mode + * @{ + */ +#define USART_MODE_RX ((uint32_t)USART_CR1_RE) +#define USART_MODE_TX ((uint32_t)USART_CR1_TE) +#define USART_MODE_TX_RX ((uint32_t)(USART_CR1_TE |USART_CR1_RE)) + +/** + * @} + */ + +/** @defgroup USART_Clock USART Clock + * @{ + */ +#define USART_CLOCK_DISABLE ((uint32_t)0x00000000) +#define USART_CLOCK_ENABLE ((uint32_t)USART_CR2_CLKEN) +/** + * @} + */ + +/** @defgroup USART_Clock_Polarity USART Clock Polarity + * @{ + */ +#define USART_POLARITY_LOW ((uint32_t)0x00000000) +#define USART_POLARITY_HIGH ((uint32_t)USART_CR2_CPOL) +/** + * @} + */ + +/** @defgroup USART_Clock_Phase USART Clock Phase + * @{ + */ +#define USART_PHASE_1EDGE ((uint32_t)0x00000000) +#define USART_PHASE_2EDGE ((uint32_t)USART_CR2_CPHA) +/** + * @} + */ + +/** @defgroup USART_Last_Bit USART Last Bit + * @{ + */ +#define USART_LASTBIT_DISABLE ((uint32_t)0x00000000) +#define USART_LASTBIT_ENABLE ((uint32_t)USART_CR2_LBCL) +/** + * @} + */ + +/** @defgroup USART_NACK_State USART NACK State + * @{ + */ +#define USART_NACK_ENABLE ((uint32_t)USART_CR3_NACK) +#define USART_NACK_DISABLE ((uint32_t)0x00000000) +/** + * @} + */ + +/** @defgroup USART_Flags USART Flags + * Elements values convention: 0xXXXX + * - 0xXXXX : Flag mask in the SR register + * @{ + */ + +#define USART_FLAG_CTS ((uint32_t)USART_SR_CTS) +#define USART_FLAG_LBD ((uint32_t)USART_SR_LBD) +#define USART_FLAG_TXE ((uint32_t)USART_SR_TXE) +#define USART_FLAG_TC ((uint32_t)USART_SR_TC) +#define USART_FLAG_RXNE ((uint32_t)USART_SR_RXNE) +#define USART_FLAG_IDLE ((uint32_t)USART_SR_IDLE) +#define USART_FLAG_ORE ((uint32_t)USART_SR_ORE) +#define USART_FLAG_NE ((uint32_t)USART_SR_NE) +#define USART_FLAG_FE ((uint32_t)USART_SR_FE) +#define USART_FLAG_PE ((uint32_t)USART_SR_PE) +/** + * @} + */ + +/** @defgroup USART_Interrupt_definition USART Interrupts Definition + * Elements values convention: 0xY000XXXX + * - XXXX : Interrupt mask (16 bits) in the Y register + * - Y : Interrupt source register (4bits) + * - 0001: CR1 register + * - 0010: CR2 register + * - 0011: CR3 register + * + * @{ + */ + +#define USART_IT_PE ((uint32_t)(USART_CR1_REG_INDEX << 28 | USART_CR1_PEIE)) +#define USART_IT_TXE ((uint32_t)(USART_CR1_REG_INDEX << 28 | USART_CR1_TXEIE)) +#define USART_IT_TC ((uint32_t)(USART_CR1_REG_INDEX << 28 | USART_CR1_TCIE)) +#define USART_IT_RXNE ((uint32_t)(USART_CR1_REG_INDEX << 28 | USART_CR1_RXNEIE)) +#define USART_IT_IDLE ((uint32_t)(USART_CR1_REG_INDEX << 28 | USART_CR1_IDLEIE)) + +#define USART_IT_LBD ((uint32_t)(USART_CR2_REG_INDEX << 28 | USART_CR2_LBDIE)) + +#define USART_IT_CTS ((uint32_t)(USART_CR3_REG_INDEX << 28 | USART_CR3_CTSIE)) +#define USART_IT_ERR ((uint32_t)(USART_CR3_REG_INDEX << 28 | USART_CR3_EIE)) + + +/** + * @} + */ + +/** + * @} + */ + + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup USART_Exported_Macros USART Exported Macros + * @{ + */ + + +/** @brief Reset USART handle state + * @param __HANDLE__: specifies the USART Handle. + * USART Handle selects the USARTx peripheral (USART availability and x value depending on device). + * @retval None + */ +#define __HAL_USART_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_USART_STATE_RESET) + +/** @brief Check whether the specified USART flag is set or not. + * @param __HANDLE__: specifies the USART Handle. + * USART Handle selects the USARTx peripheral (USART availability and x value depending on device). + * @param __FLAG__: specifies the flag to check. + * This parameter can be one of the following values: + * @arg USART_FLAG_TXE: Transmit data register empty flag + * @arg USART_FLAG_TC: Transmission Complete flag + * @arg USART_FLAG_RXNE: Receive data register not empty flag + * @arg USART_FLAG_IDLE: Idle Line detection flag + * @arg USART_FLAG_ORE: OverRun Error flag + * @arg USART_FLAG_NE: Noise Error flag + * @arg USART_FLAG_FE: Framing Error flag + * @arg USART_FLAG_PE: Parity Error flag + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ + +#define __HAL_USART_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__)) + +/** @brief Clear the specified USART pending flags. + * @param __HANDLE__: specifies the USART Handle. + * USART Handle selects the USARTx peripheral (USART availability and x value depending on device). + * @param __FLAG__: specifies the flag to check. + * This parameter can be any combination of the following values: + * @arg USART_FLAG_TC: Transmission Complete flag. + * @arg USART_FLAG_RXNE: Receive data register not empty flag. + * + * @note PE (Parity error), FE (Framing error), NE (Noise error), ORE (OverRun + * error) and IDLE (Idle line detected) flags are cleared by software + * sequence: a read operation to USART_SR register followed by a read + * operation to USART_DR register. + * @note RXNE flag can be also cleared by a read to the USART_DR register. + * @note TC flag can be also cleared by software sequence: a read operation to + * USART_SR register followed by a write operation to USART_DR register. + * @note TXE flag is cleared only by a write to the USART_DR register. + * + * @retval None + */ +#define __HAL_USART_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__)) + +/** @brief Clear the USART PE pending flag. + * @param __HANDLE__: specifies the USART Handle. + * USART Handle selects the USARTx peripheral (USART availability and x value depending on device). + * @retval None + */ +#define __HAL_USART_CLEAR_PEFLAG(__HANDLE__) \ +do{ \ + __IO uint32_t tmpreg; \ + tmpreg = (__HANDLE__)->Instance->SR; \ + tmpreg = (__HANDLE__)->Instance->DR; \ + UNUSED(tmpreg); \ +}while(0) + + +/** @brief Clear the USART FE pending flag. + * @param __HANDLE__: specifies the USART Handle. + * USART Handle selects the USARTx peripheral (USART availability and x value depending on device). + * @retval None + */ +#define __HAL_USART_CLEAR_FEFLAG(__HANDLE__) __HAL_USART_CLEAR_PEFLAG(__HANDLE__) + +/** @brief Clear the USART NE pending flag. + * @param __HANDLE__: specifies the USART Handle. + * USART Handle selects the USARTx peripheral (USART availability and x value depending on device). + * @retval None + */ +#define __HAL_USART_CLEAR_NEFLAG(__HANDLE__) __HAL_USART_CLEAR_PEFLAG(__HANDLE__) + +/** @brief Clear the USART ORE pending flag. + * @param __HANDLE__: specifies the USART Handle. + * USART Handle selects the USARTx peripheral (USART availability and x value depending on device). + * @retval None + */ +#define __HAL_USART_CLEAR_OREFLAG(__HANDLE__) __HAL_USART_CLEAR_PEFLAG(__HANDLE__) + +/** @brief Clear the USART IDLE pending flag. + * @param __HANDLE__: specifies the USART Handle. + * USART Handle selects the USARTx peripheral (USART availability and x value depending on device). + * @retval None + */ +#define __HAL_USART_CLEAR_IDLEFLAG(__HANDLE__) __HAL_USART_CLEAR_PEFLAG(__HANDLE__) + +/** @brief Enable the specified Usart interrupts. + * @param __HANDLE__: specifies the USART Handle. + * USART Handle selects the USARTx peripheral (USART availability and x value depending on device). + * @param __INTERRUPT__: specifies the USART interrupt source to enable. + * This parameter can be one of the following values: + * @arg USART_IT_TXE: Transmit Data Register empty interrupt + * @arg USART_IT_TC: Transmission complete interrupt + * @arg USART_IT_RXNE: Receive Data register not empty interrupt + * @arg USART_IT_IDLE: Idle line detection interrupt + * @arg USART_IT_PE: Parity Error interrupt + * @arg USART_IT_ERR: Error interrupt(Frame error, noise error, overrun error) + * @retval None + */ +#define __HAL_USART_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28) == USART_CR1_REG_INDEX)? ((__HANDLE__)->Instance->CR1 |= ((__INTERRUPT__) & USART_IT_MASK)): \ + (((__INTERRUPT__) >> 28) == USART_CR2_REG_INDEX)? ((__HANDLE__)->Instance->CR2 |= ((__INTERRUPT__) & USART_IT_MASK)): \ + ((__HANDLE__)->Instance->CR3 |= ((__INTERRUPT__) & USART_IT_MASK))) + + +/** @brief Disable the specified Usart interrupts. + * @param __HANDLE__: specifies the USART Handle. + * USART Handle selects the USARTx peripheral (USART availability and x value depending on device). + * @param __INTERRUPT__: specifies the USART interrupt source to disable. + * This parameter can be one of the following values: + * @arg USART_IT_TXE: Transmit Data Register empty interrupt + * @arg USART_IT_TC: Transmission complete interrupt + * @arg USART_IT_RXNE: Receive Data register not empty interrupt + * @arg USART_IT_IDLE: Idle line detection interrupt + * @arg USART_IT_PE: Parity Error interrupt + * @arg USART_IT_ERR: Error interrupt(Frame error, noise error, overrun error) + * @retval None + */ +#define __HAL_USART_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28) == USART_CR1_REG_INDEX)? ((__HANDLE__)->Instance->CR1 &= ~((__INTERRUPT__) & USART_IT_MASK)): \ + (((__INTERRUPT__) >> 28) == USART_CR2_REG_INDEX)? ((__HANDLE__)->Instance->CR2 &= ~((__INTERRUPT__) & USART_IT_MASK)): \ + ((__HANDLE__)->Instance->CR3 &= ~ ((__INTERRUPT__) & USART_IT_MASK))) + + + +/** @brief Check whether the specified Usart interrupt has occurred or not. + * @param __HANDLE__: specifies the USART Handle. + * USART Handle selects the USARTx peripheral (USART availability and x value depending on device). + * @param __IT__: specifies the USART interrupt source to check. + * This parameter can be one of the following values: + * @arg USART_IT_TXE: Transmit Data Register empty interrupt + * @arg USART_IT_TC: Transmission complete interrupt + * @arg USART_IT_RXNE: Receive Data register not empty interrupt + * @arg USART_IT_IDLE: Idle line detection interrupt + * @arg USART_IT_ERR: Error interrupt + * @arg USART_IT_PE: Parity Error interrupt + * @retval The new state of __IT__ (TRUE or FALSE). + */ +#define __HAL_USART_GET_IT_SOURCE(__HANDLE__, __IT__) (((((__IT__) >> 28) == USART_CR1_REG_INDEX)? (__HANDLE__)->Instance->CR1:(((((uint32_t)(__IT__)) >> 28) == USART_CR2_REG_INDEX)? \ + (__HANDLE__)->Instance->CR2 : (__HANDLE__)->Instance->CR3)) & (((uint32_t)(__IT__)) & USART_IT_MASK)) + +/** @brief Enables the USART one bit sample method + * @param __HANDLE__: specifies the USART Handle. + * @retval None + */ +#define __HAL_USART_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CR3, (USART_CR3_ONEBIT)) + +/** @brief Disables the UART one bit sample method + * @param __HANDLE__: specifies the UART Handle. + * @retval None + */ +#define __HAL_USART_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CR3,(USART_CR3_ONEBIT)) + +/** @brief Enable USART + * @param __HANDLE__: specifies the USART Handle. + * USART Handle selects the USARTx peripheral (USART availability and x value depending on device). + * @retval None + */ +#define __HAL_USART_ENABLE(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CR1,(USART_CR1_UE)) + +/** @brief Disable USART + * @param __HANDLE__: specifies the USART Handle. + * USART Handle selects the USARTx peripheral (USART availability and x value depending on device). + * @retval None + */ +#define __HAL_USART_DISABLE(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CR1,(USART_CR1_UE)) + + +/** + * @} + */ + + +/* Private macros --------------------------------------------------------*/ +/** @defgroup USART_Private_Macros USART Private Macros + * @{ + */ + +#define USART_CR1_REG_INDEX 1 +#define USART_CR2_REG_INDEX 2 +#define USART_CR3_REG_INDEX 3 + +#define USART_DIV(__PCLK__, __BAUD__) (((__PCLK__)*25)/(2*(__BAUD__))) +#define USART_DIVMANT(__PCLK__, __BAUD__) (USART_DIV((__PCLK__), (__BAUD__))/100) +#define USART_DIVFRAQ(__PCLK__, __BAUD__) (((USART_DIV((__PCLK__), (__BAUD__)) - (USART_DIVMANT((__PCLK__), (__BAUD__)) * 100)) * 16 + 50) / 100) +#define USART_BRR(__PCLK__, __BAUD__) ((USART_DIVMANT((__PCLK__), (__BAUD__)) << 4)|(USART_DIVFRAQ((__PCLK__), (__BAUD__)) & 0x07)) + +/** Check USART Baud rate + * __BAUDRATE__: Baudrate specified by the user + * The maximum Baud Rate is derived from the maximum clock on APB (i.e. 32 MHz) + * divided by the smallest oversampling used on the USART (i.e. 8) + * return : TRUE or FALSE + */ +#define IS_USART_BAUDRATE(__BAUDRATE__) ((__BAUDRATE__) < 4000001) + +#define IS_USART_WORD_LENGTH(LENGTH) (((LENGTH) == USART_WORDLENGTH_8B) || \ + ((LENGTH) == USART_WORDLENGTH_9B)) + +#define IS_USART_STOPBITS(STOPBITS) (((STOPBITS) == USART_STOPBITS_1) || \ + ((STOPBITS) == USART_STOPBITS_0_5) || \ + ((STOPBITS) == USART_STOPBITS_1_5) || \ + ((STOPBITS) == USART_STOPBITS_2)) + +#define IS_USART_PARITY(PARITY) (((PARITY) == USART_PARITY_NONE) || \ + ((PARITY) == USART_PARITY_EVEN) || \ + ((PARITY) == USART_PARITY_ODD)) + +#define IS_USART_MODE(MODE) ((((MODE) & (~((uint32_t)USART_MODE_TX_RX))) == 0x00) && ((MODE) != (uint32_t)0x00000000)) + +#define IS_USART_CLOCK(CLOCK) (((CLOCK) == USART_CLOCK_DISABLE) || \ + ((CLOCK) == USART_CLOCK_ENABLE)) + +#define IS_USART_POLARITY(CPOL) (((CPOL) == USART_POLARITY_LOW) || ((CPOL) == USART_POLARITY_HIGH)) + +#define IS_USART_PHASE(CPHA) (((CPHA) == USART_PHASE_1EDGE) || ((CPHA) == USART_PHASE_2EDGE)) + +#define IS_USART_LASTBIT(LASTBIT) (((LASTBIT) == USART_LASTBIT_DISABLE) || \ + ((LASTBIT) == USART_LASTBIT_ENABLE)) + +#define IS_USART_NACK_STATE(NACK) (((NACK) == USART_NACK_ENABLE) || \ + ((NACK) == USART_NACK_DISABLE)) + +/** USART interruptions flag mask + * + */ +#define USART_IT_MASK ((uint32_t) USART_CR1_PEIE | USART_CR1_TXEIE | USART_CR1_TCIE | USART_CR1_RXNEIE | \ + USART_CR1_IDLEIE | USART_CR2_LBDIE | USART_CR3_CTSIE | USART_CR3_EIE ) + +/** + * @} + */ + + +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup USART_Exported_Functions USART Exported Functions + * @{ + */ + +/** @addtogroup USART_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ + +/* Initialization and de-initialization functions ******************************/ +HAL_StatusTypeDef HAL_USART_Init(USART_HandleTypeDef *husart); +HAL_StatusTypeDef HAL_USART_DeInit(USART_HandleTypeDef *husart); +void HAL_USART_MspInit(USART_HandleTypeDef *husart); +void HAL_USART_MspDeInit(USART_HandleTypeDef *husart); + +/** + * @} + */ + +/** @addtogroup USART_Exported_Functions_Group2 IO operation functions + * @{ + */ + +/* IO operation functions *******************************************************/ +HAL_StatusTypeDef HAL_USART_Transmit(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_USART_Receive(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_USART_TransmitReceive(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_USART_Transmit_IT(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size); +HAL_StatusTypeDef HAL_USART_Receive_IT(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size); +HAL_StatusTypeDef HAL_USART_TransmitReceive_IT(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size); +HAL_StatusTypeDef HAL_USART_Transmit_DMA(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size); +HAL_StatusTypeDef HAL_USART_Receive_DMA(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size); +HAL_StatusTypeDef HAL_USART_TransmitReceive_DMA(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size); +HAL_StatusTypeDef HAL_USART_DMAPause(USART_HandleTypeDef *husart); +HAL_StatusTypeDef HAL_USART_DMAResume(USART_HandleTypeDef *husart); +HAL_StatusTypeDef HAL_USART_DMAStop(USART_HandleTypeDef *husart); +void HAL_USART_IRQHandler(USART_HandleTypeDef *husart); +void HAL_USART_TxCpltCallback(USART_HandleTypeDef *husart); +void HAL_USART_TxHalfCpltCallback(USART_HandleTypeDef *husart); +void HAL_USART_RxCpltCallback(USART_HandleTypeDef *husart); +void HAL_USART_RxHalfCpltCallback(USART_HandleTypeDef *husart); +void HAL_USART_TxRxCpltCallback(USART_HandleTypeDef *husart); +void HAL_USART_ErrorCallback(USART_HandleTypeDef *husart); + +/** + * @} + */ + +/* Peripheral Control functions ***********************************************/ + +/** @addtogroup USART_Exported_Functions_Group3 Peripheral State and Errors functions + * @{ + */ + +/* Peripheral State and Error functions ***************************************/ +HAL_USART_StateTypeDef HAL_USART_GetState(USART_HandleTypeDef *husart); +uint32_t HAL_USART_GetError(USART_HandleTypeDef *husart); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32L1xx_HAL_USART_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_wwdg.h b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_wwdg.h new file mode 100755 index 0000000..b2fe1c8 --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_hal_wwdg.h @@ -0,0 +1,287 @@ +/** + ****************************************************************************** + * @file stm32l1xx_hal_wwdg.h + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief Header file of WWDG HAL module. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L1xx_HAL_WWDG_H +#define __STM32L1xx_HAL_WWDG_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_hal_def.h" + +/** @addtogroup STM32L1xx_HAL_Driver + * @{ + */ + +/** @addtogroup WWDG + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup WWDG_Exported_Types WWDG Exported Types + * @{ + */ + +/** + * @brief WWDG Init structure definition + */ +typedef struct +{ + uint32_t Prescaler; /*!< Specifies the prescaler value of the WWDG. + This parameter can be a value of @ref WWDG_Prescaler */ + + uint32_t Window; /*!< Specifies the WWDG window value to be compared to the downcounter. + This parameter must be a number Min_Data = 0x40 and Max_Data = 0x7F */ + + uint32_t Counter; /*!< Specifies the WWDG free-running downcounter value. + This parameter must be a number between Min_Data = 0x40 and Max_Data = 0x7F */ + + uint32_t EWIMode ; /*!< Specifies if WWDG Early Wakeup Interupt is enable or not. + This parameter can be a value of @ref WWDG_EWI_Mode */ + +}WWDG_InitTypeDef; + +/** + * @brief WWDG handle Structure definition + */ +typedef struct +{ + WWDG_TypeDef *Instance; /*!< Register base address */ + + WWDG_InitTypeDef Init; /*!< WWDG required parameters */ + +}WWDG_HandleTypeDef; +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup WWDG_Exported_Constants WWDG Exported Constants + * @{ + */ + +/** @defgroup WWDG_Interrupt_definition WWDG Interrupt definition + * @{ + */ +#define WWDG_IT_EWI WWDG_CFR_EWI /*!< Early wakeup interrupt */ + +/** + * @} + */ + +/** @defgroup WWDG_Flag_definition WWDG Flag definition + * @brief WWDG Flag definition + * @{ + */ +#define WWDG_FLAG_EWIF WWDG_SR_EWIF /*!< Early wakeup interrupt flag */ + +/** + * @} + */ + +/** @defgroup WWDG_Prescaler WWDG Prescaler + * @{ + */ +#define WWDG_PRESCALER_1 0x00000000u /*!< WWDG counter clock = (PCLK1/4096)/1 */ +#define WWDG_PRESCALER_2 WWDG_CFR_WDGTB_0 /*!< WWDG counter clock = (PCLK1/4096)/2 */ +#define WWDG_PRESCALER_4 WWDG_CFR_WDGTB_1 /*!< WWDG counter clock = (PCLK1/4096)/4 */ +#define WWDG_PRESCALER_8 WWDG_CFR_WDGTB /*!< WWDG counter clock = (PCLK1/4096)/8 */ +/** + * @} + */ + +/** @defgroup WWDG_EWI_Mode WWDG Early Wakeup Interrupt Mode + * @{ + */ +#define WWDG_EWI_DISABLE 0x00000000u /*!< EWI Disable */ +#define WWDG_EWI_ENABLE WWDG_CFR_EWI /*!< EWI Enable */ +/** + * @} + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ + +/** @defgroup WWDG_Private_Macros WWDG Private Macros + * @{ + */ +#define IS_WWDG_PRESCALER(__PRESCALER__) (((__PRESCALER__) == WWDG_PRESCALER_1) || \ + ((__PRESCALER__) == WWDG_PRESCALER_2) || \ + ((__PRESCALER__) == WWDG_PRESCALER_4) || \ + ((__PRESCALER__) == WWDG_PRESCALER_8)) + +#define IS_WWDG_WINDOW(__WINDOW__) (((__WINDOW__) >= WWDG_CFR_W_6) && ((__WINDOW__) <= WWDG_CFR_W)) + +#define IS_WWDG_COUNTER(__COUNTER__) (((__COUNTER__) >= WWDG_CR_T_6) && ((__COUNTER__) <= WWDG_CR_T)) + +#define IS_WWDG_EWI_MODE(__MODE__) (((__MODE__) == WWDG_EWI_ENABLE) || \ + ((__MODE__) == WWDG_EWI_DISABLE)) +/** + * @} + */ + + +/* Exported macros ------------------------------------------------------------*/ + +/** @defgroup WWDG_Exported_Macros WWDG Exported Macros + * @{ + */ + +/** + * @brief Enable the WWDG peripheral. + * @param __HANDLE__ WWDG handle + * @retval None + */ +#define __HAL_WWDG_ENABLE(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CR, WWDG_CR_WDGA) + +/** + * @brief Enable the WWDG early wakeup interrupt. + * @param __HANDLE__: WWDG handle + * @param __INTERRUPT__ specifies the interrupt to enable. + * This parameter can be one of the following values: + * @arg WWDG_IT_EWI: Early wakeup interrupt + * @note Once enabled this interrupt cannot be disabled except by a system reset. + * @retval None + */ +#define __HAL_WWDG_ENABLE_IT(__HANDLE__, __INTERRUPT__) SET_BIT((__HANDLE__)->Instance->CFR, (__INTERRUPT__)) + +/** + * @brief Check whether the selected WWDG interrupt has occurred or not. + * @param __HANDLE__ WWDG handle + * @param __INTERRUPT__ specifies the it to check. + * This parameter can be one of the following values: + * @arg WWDG_FLAG_EWIF: Early wakeup interrupt IT + * @retval The new state of WWDG_FLAG (SET or RESET). + */ +#define __HAL_WWDG_GET_IT(__HANDLE__, __INTERRUPT__) __HAL_WWDG_GET_FLAG((__HANDLE__),(__INTERRUPT__)) + +/** @brief Clear the WWDG interrupt pending bits. + * bits to clear the selected interrupt pending bits. + * @param __HANDLE__ WWDG handle + * @param __INTERRUPT__ specifies the interrupt pending bit to clear. + * This parameter can be one of the following values: + * @arg WWDG_FLAG_EWIF: Early wakeup interrupt flag + */ +#define __HAL_WWDG_CLEAR_IT(__HANDLE__, __INTERRUPT__) __HAL_WWDG_CLEAR_FLAG((__HANDLE__), (__INTERRUPT__)) + +/** + * @brief Check whether the specified WWDG flag is set or not. + * @param __HANDLE__ WWDG handle + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg WWDG_FLAG_EWIF: Early wakeup interrupt flag + * @retval The new state of WWDG_FLAG (SET or RESET). + */ +#define __HAL_WWDG_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__)) + +/** + * @brief Clear the WWDG's pending flags. + * @param __HANDLE__ WWDG handle + * @param __FLAG__ specifies the flag to clear. + * This parameter can be one of the following values: + * @arg WWDG_FLAG_EWIF: Early wakeup interrupt flag + * @retval None + */ +#define __HAL_WWDG_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__)) + +/** @brief Check whether the specified WWDG interrupt source is enabled or not. + * @param __HANDLE__ WWDG Handle. + * @param __INTERRUPT__ specifies the WWDG interrupt source to check. + * This parameter can be one of the following values: + * @arg WWDG_IT_EWI: Early Wakeup Interrupt + * @retval state of __INTERRUPT__ (TRUE or FALSE). + */ +#define __HAL_WWDG_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CFR & (__INTERRUPT__)) == (__INTERRUPT__)) + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup WWDG_Exported_Functions + * @{ + */ + +/** @addtogroup WWDG_Exported_Functions_Group1 + * @{ + */ +/* Initialization/de-initialization functions **********************************/ +HAL_StatusTypeDef HAL_WWDG_Init(WWDG_HandleTypeDef *hwwdg); +void HAL_WWDG_MspInit(WWDG_HandleTypeDef *hwwdg); +/** + * @} + */ + +/** @addtogroup WWDG_Exported_Functions_Group2 + * @{ + */ +/* I/O operation functions ******************************************************/ +HAL_StatusTypeDef HAL_WWDG_Refresh(WWDG_HandleTypeDef *hwwdg); +void HAL_WWDG_IRQHandler(WWDG_HandleTypeDef *hwwdg); +void HAL_WWDG_EarlyWakeupCallback(WWDG_HandleTypeDef* hwwdg); +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32L1xx_HAL_WWDG_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_ll_adc.h b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_ll_adc.h new file mode 100755 index 0000000..10afe05 --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_ll_adc.h @@ -0,0 +1,5177 @@ +/** + ****************************************************************************** + * @file stm32l1xx_ll_adc.h + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief Header file of ADC LL module. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L1xx_LL_ADC_H +#define __STM32L1xx_LL_ADC_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx.h" + +/** @addtogroup STM32L1xx_LL_Driver + * @{ + */ + +#if defined (ADC1) + +/** @defgroup ADC_LL ADC + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup ADC_LL_Private_Constants ADC Private Constants + * @{ + */ + +/* Internal mask for ADC group regular sequencer: */ +/* To select into literal LL_ADC_REG_RANK_x the relevant bits for: */ +/* - sequencer register offset */ +/* - sequencer rank bits position into the selected register */ + +/* Internal register offset for ADC group regular sequencer configuration */ +/* (offset placed into a spare area of literal definition) */ +#define ADC_SQR1_REGOFFSET ((uint32_t)0x00000000U) +#define ADC_SQR2_REGOFFSET ((uint32_t)0x00000100U) +#define ADC_SQR3_REGOFFSET ((uint32_t)0x00000200U) +#define ADC_SQR4_REGOFFSET ((uint32_t)0x00000300U) +#define ADC_SQR5_REGOFFSET ((uint32_t)0x00000400U) + +#define ADC_REG_SQRX_REGOFFSET_MASK (ADC_SQR1_REGOFFSET | ADC_SQR2_REGOFFSET | ADC_SQR3_REGOFFSET | ADC_SQR4_REGOFFSET | ADC_SQR5_REGOFFSET) +#define ADC_REG_RANK_ID_SQRX_MASK (ADC_CHANNEL_ID_NUMBER_MASK_POSBIT0) + +/* Definition of ADC group regular sequencer bits information to be inserted */ +/* into ADC group regular sequencer ranks literals definition. */ +#define ADC_REG_RANK_1_SQRX_BITOFFSET_POS ((uint32_t) 0U) /* Value equivalent to POSITION_VAL(ADC_SQR5_SQ1) */ +#define ADC_REG_RANK_2_SQRX_BITOFFSET_POS ((uint32_t) 5U) /* Value equivalent to POSITION_VAL(ADC_SQR5_SQ2) */ +#define ADC_REG_RANK_3_SQRX_BITOFFSET_POS ((uint32_t)10U) /* Value equivalent to POSITION_VAL(ADC_SQR5_SQ3) */ +#define ADC_REG_RANK_4_SQRX_BITOFFSET_POS ((uint32_t)15U) /* Value equivalent to POSITION_VAL(ADC_SQR5_SQ4) */ +#define ADC_REG_RANK_5_SQRX_BITOFFSET_POS ((uint32_t)20U) /* Value equivalent to POSITION_VAL(ADC_SQR5_SQ5) */ +#define ADC_REG_RANK_6_SQRX_BITOFFSET_POS ((uint32_t)25U) /* Value equivalent to POSITION_VAL(ADC_SQR5_SQ6) */ +#define ADC_REG_RANK_7_SQRX_BITOFFSET_POS ((uint32_t) 0U) /* Value equivalent to POSITION_VAL(ADC_SQR4_SQ7) */ +#define ADC_REG_RANK_8_SQRX_BITOFFSET_POS ((uint32_t) 5U) /* Value equivalent to POSITION_VAL(ADC_SQR4_SQ8) */ +#define ADC_REG_RANK_9_SQRX_BITOFFSET_POS ((uint32_t)10U) /* Value equivalent to POSITION_VAL(ADC_SQR4_SQ9) */ +#define ADC_REG_RANK_10_SQRX_BITOFFSET_POS ((uint32_t)15U) /* Value equivalent to POSITION_VAL(ADC_SQR4_SQ10) */ +#define ADC_REG_RANK_11_SQRX_BITOFFSET_POS ((uint32_t)20U) /* Value equivalent to POSITION_VAL(ADC_SQR4_SQ11) */ +#define ADC_REG_RANK_12_SQRX_BITOFFSET_POS ((uint32_t)25U) /* Value equivalent to POSITION_VAL(ADC_SQR4_SQ12) */ +#define ADC_REG_RANK_13_SQRX_BITOFFSET_POS ((uint32_t) 0U) /* Value equivalent to POSITION_VAL(ADC_SQR3_SQ13) */ +#define ADC_REG_RANK_14_SQRX_BITOFFSET_POS ((uint32_t) 5U) /* Value equivalent to POSITION_VAL(ADC_SQR3_SQ14) */ +#define ADC_REG_RANK_15_SQRX_BITOFFSET_POS ((uint32_t)10U) /* Value equivalent to POSITION_VAL(ADC_SQR3_SQ15) */ +#define ADC_REG_RANK_16_SQRX_BITOFFSET_POS ((uint32_t)15U) /* Value equivalent to POSITION_VAL(ADC_SQR3_SQ16) */ +#define ADC_REG_RANK_17_SQRX_BITOFFSET_POS ((uint32_t)20U) /* Value equivalent to POSITION_VAL(ADC_SQR3_SQ17) */ +#define ADC_REG_RANK_18_SQRX_BITOFFSET_POS ((uint32_t)25U) /* Value equivalent to POSITION_VAL(ADC_SQR3_SQ18) */ +#define ADC_REG_RANK_19_SQRX_BITOFFSET_POS ((uint32_t) 0U) /* Value equivalent to POSITION_VAL(ADC_SQR2_SQ29) */ +#define ADC_REG_RANK_20_SQRX_BITOFFSET_POS ((uint32_t) 5U) /* Value equivalent to POSITION_VAL(ADC_SQR2_SQ20) */ +#define ADC_REG_RANK_21_SQRX_BITOFFSET_POS ((uint32_t)10U) /* Value equivalent to POSITION_VAL(ADC_SQR2_SQ21) */ +#define ADC_REG_RANK_22_SQRX_BITOFFSET_POS ((uint32_t)15U) /* Value equivalent to POSITION_VAL(ADC_SQR2_SQ22) */ +#define ADC_REG_RANK_23_SQRX_BITOFFSET_POS ((uint32_t)20U) /* Value equivalent to POSITION_VAL(ADC_SQR2_SQ23) */ +#define ADC_REG_RANK_24_SQRX_BITOFFSET_POS ((uint32_t)25U) /* Value equivalent to POSITION_VAL(ADC_SQR2_SQ24) */ +#define ADC_REG_RANK_25_SQRX_BITOFFSET_POS ((uint32_t) 0U) /* Value equivalent to POSITION_VAL(ADC_SQR1_SQ25) */ +#define ADC_REG_RANK_26_SQRX_BITOFFSET_POS ((uint32_t) 5U) /* Value equivalent to POSITION_VAL(ADC_SQR1_SQ26) */ +#define ADC_REG_RANK_27_SQRX_BITOFFSET_POS ((uint32_t)10U) /* Value equivalent to POSITION_VAL(ADC_SQR1_SQ27) */ +#if defined(ADC_SQR1_SQ28) +#define ADC_REG_RANK_28_SQRX_BITOFFSET_POS ((uint32_t)15U) /* Value equivalent to POSITION_VAL(ADC_SQR1_SQ28) */ +#endif + + + +/* Internal mask for ADC group injected sequencer: */ +/* To select into literal LL_ADC_INJ_RANK_x the relevant bits for: */ +/* - data register offset */ +/* - offset register offset */ +/* - sequencer rank bits position into the selected register */ + +/* Internal register offset for ADC group injected data register */ +/* (offset placed into a spare area of literal definition) */ +#define ADC_JDR1_REGOFFSET ((uint32_t)0x00000000U) +#define ADC_JDR2_REGOFFSET ((uint32_t)0x00000100U) +#define ADC_JDR3_REGOFFSET ((uint32_t)0x00000200U) +#define ADC_JDR4_REGOFFSET ((uint32_t)0x00000300U) + +/* Internal register offset for ADC group injected offset configuration */ +/* (offset placed into a spare area of literal definition) */ +#define ADC_JOFR1_REGOFFSET ((uint32_t)0x00000000U) +#define ADC_JOFR2_REGOFFSET ((uint32_t)0x00001000U) +#define ADC_JOFR3_REGOFFSET ((uint32_t)0x00002000U) +#define ADC_JOFR4_REGOFFSET ((uint32_t)0x00003000U) + +#define ADC_INJ_JDRX_REGOFFSET_MASK (ADC_JDR1_REGOFFSET | ADC_JDR2_REGOFFSET | ADC_JDR3_REGOFFSET | ADC_JDR4_REGOFFSET) +#define ADC_INJ_JOFRX_REGOFFSET_MASK (ADC_JOFR1_REGOFFSET | ADC_JOFR2_REGOFFSET | ADC_JOFR3_REGOFFSET | ADC_JOFR4_REGOFFSET) +#define ADC_INJ_RANK_ID_JSQR_MASK (ADC_CHANNEL_ID_NUMBER_MASK_POSBIT0) + +/* Definition of ADC group injected sequencer bits information to be inserted */ +/* into ADC group injected sequencer ranks literals definition. */ +#define ADC_INJ_RANK_1_JSQR_BITOFFSET_POS ((uint32_t) 0U) /* Value equivalent to POSITION_VAL(ADC_JSQR_JSQ1) */ +#define ADC_INJ_RANK_2_JSQR_BITOFFSET_POS ((uint32_t) 5U) /* Value equivalent to POSITION_VAL(ADC_JSQR_JSQ2) */ +#define ADC_INJ_RANK_3_JSQR_BITOFFSET_POS ((uint32_t)10U) /* Value equivalent to POSITION_VAL(ADC_JSQR_JSQ3) */ +#define ADC_INJ_RANK_4_JSQR_BITOFFSET_POS ((uint32_t)15U) /* Value equivalent to POSITION_VAL(ADC_JSQR_JSQ4) */ + + + +/* Internal mask for ADC group regular trigger: */ +/* To select into literal LL_ADC_REG_TRIG_x the relevant bits for: */ +/* - regular trigger source */ +/* - regular trigger edge */ +#define ADC_REG_TRIG_EXT_EDGE_DEFAULT (ADC_CR2_EXTEN_0) /* Trigger edge set to rising edge (default setting for compatibility with some ADC on other STM32 families having this setting set by HW default value) */ + +/* Mask containing trigger source masks for each of possible */ +/* trigger edge selection duplicated with shifts [0; 4; 8; 12] */ +/* corresponding to {SW start; ext trigger; ext trigger; ext trigger}. */ +#define ADC_REG_TRIG_SOURCE_MASK (((LL_ADC_REG_TRIG_SOFTWARE & ADC_CR2_EXTSEL) >> (4U * 0U)) | \ + ((ADC_CR2_EXTSEL) >> (4U * 1U)) | \ + ((ADC_CR2_EXTSEL) >> (4U * 2U)) | \ + ((ADC_CR2_EXTSEL) >> (4U * 3U)) ) + +/* Mask containing trigger edge masks for each of possible */ +/* trigger edge selection duplicated with shifts [0; 4; 8; 12] */ +/* corresponding to {SW start; ext trigger; ext trigger; ext trigger}. */ +#define ADC_REG_TRIG_EDGE_MASK (((LL_ADC_REG_TRIG_SOFTWARE & ADC_CR2_EXTEN) >> (4U * 0U)) | \ + ((ADC_REG_TRIG_EXT_EDGE_DEFAULT) >> (4U * 1U)) | \ + ((ADC_REG_TRIG_EXT_EDGE_DEFAULT) >> (4U * 2U)) | \ + ((ADC_REG_TRIG_EXT_EDGE_DEFAULT) >> (4U * 3U)) ) + +/* Definition of ADC group regular trigger bits information. */ +#define ADC_REG_TRIG_EXTSEL_BITOFFSET_POS ((uint32_t)24U) /* Value equivalent to POSITION_VAL(ADC_CR2_EXTSEL) */ +#define ADC_REG_TRIG_EXTEN_BITOFFSET_POS ((uint32_t)28U) /* Value equivalent to POSITION_VAL(ADC_CR2_EXTEN) */ + + + +/* Internal mask for ADC group injected trigger: */ +/* To select into literal LL_ADC_INJ_TRIG_x the relevant bits for: */ +/* - injected trigger source */ +/* - injected trigger edge */ +#define ADC_INJ_TRIG_EXT_EDGE_DEFAULT (ADC_CR2_JEXTEN_0) /* Trigger edge set to rising edge (default setting for compatibility with some ADC on other STM32 families having this setting set by HW default value) */ + +/* Mask containing trigger source masks for each of possible */ +/* trigger edge selection duplicated with shifts [0; 4; 8; 12] */ +/* corresponding to {SW start; ext trigger; ext trigger; ext trigger}. */ +#define ADC_INJ_TRIG_SOURCE_MASK (((LL_ADC_REG_TRIG_SOFTWARE & ADC_CR2_JEXTSEL) >> (4U * 0U)) | \ + ((ADC_CR2_JEXTSEL) >> (4U * 1U)) | \ + ((ADC_CR2_JEXTSEL) >> (4U * 2U)) | \ + ((ADC_CR2_JEXTSEL) >> (4U * 3U)) ) + +/* Mask containing trigger edge masks for each of possible */ +/* trigger edge selection duplicated with shifts [0; 4; 8; 12] */ +/* corresponding to {SW start; ext trigger; ext trigger; ext trigger}. */ +#define ADC_INJ_TRIG_EDGE_MASK (((LL_ADC_INJ_TRIG_SOFTWARE & ADC_CR2_JEXTEN) >> (4U * 0U)) | \ + ((ADC_INJ_TRIG_EXT_EDGE_DEFAULT) >> (4U * 1U)) | \ + ((ADC_INJ_TRIG_EXT_EDGE_DEFAULT) >> (4U * 2U)) | \ + ((ADC_INJ_TRIG_EXT_EDGE_DEFAULT) >> (4U * 3U)) ) + +/* Definition of ADC group injected trigger bits information. */ +#define ADC_INJ_TRIG_EXTSEL_BITOFFSET_POS ((uint32_t)16U) /* Value equivalent to POSITION_VAL(ADC_CR2_JEXTSEL) */ +#define ADC_INJ_TRIG_EXTEN_BITOFFSET_POS ((uint32_t)20U) /* Value equivalent to POSITION_VAL(ADC_CR2_JEXTEN) */ + + + + + + +/* Internal mask for ADC channel: */ +/* To select into literal LL_ADC_CHANNEL_x the relevant bits for: */ +/* - channel identifier defined by number */ +/* - channel differentiation between external channels (connected to */ +/* GPIO pins) and internal channels (connected to internal paths) */ +/* - channel sampling time defined by SMPRx register offset */ +/* and SMPx bits positions into SMPRx register */ +#define ADC_CHANNEL_ID_NUMBER_MASK (ADC_CR1_AWDCH) +#define ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS ((uint32_t) 0U)/* Value equivalent to POSITION_VAL(ADC_CHANNEL_ID_NUMBER_MASK) */ +#define ADC_CHANNEL_ID_MASK (ADC_CHANNEL_ID_NUMBER_MASK | ADC_CHANNEL_ID_INTERNAL_CH_MASK) +/* Equivalent mask of ADC_CHANNEL_NUMBER_MASK aligned on register LSB (bit 0) */ +#define ADC_CHANNEL_ID_NUMBER_MASK_POSBIT0 ((uint32_t)0x0000001FU) /* Equivalent to shift: (ADC_CHANNEL_NUMBER_MASK >> POSITION_VAL(ADC_CHANNEL_NUMBER_MASK)) */ + +/* Channel differentiation between external and internal channels */ +#define ADC_CHANNEL_ID_INTERNAL_CH ((uint32_t)0x80000000U) /* Marker of internal channel */ +#define ADC_CHANNEL_ID_INTERNAL_CH_MASK (ADC_CHANNEL_ID_INTERNAL_CH) + +/* Internal register offset for ADC channel sampling time configuration */ +/* (offset placed into a spare area of literal definition) */ +#define ADC_SMPR1_REGOFFSET ((uint32_t)0x00000000U) +#define ADC_SMPR2_REGOFFSET ((uint32_t)0x02000000U) +#define ADC_SMPR3_REGOFFSET ((uint32_t)0x04000000U) +#if defined(ADC_SMPR0_SMP31) +#define ADC_SMPR0_REGOFFSET ((uint32_t)0x28000000U) /* SMPR0 register offset from SMPR1 is 20 registers. On STM32L1, parameter not available on all devices: only on STM32L1 Cat.4 and Cat.5. */ +#define ADC_CHANNEL_SMPRX_REGOFFSET_MASK (ADC_SMPR1_REGOFFSET | ADC_SMPR2_REGOFFSET | ADC_SMPR3_REGOFFSET | ADC_SMPR0_REGOFFSET) +#else +#define ADC_CHANNEL_SMPRX_REGOFFSET_MASK (ADC_SMPR1_REGOFFSET | ADC_SMPR2_REGOFFSET | ADC_SMPR3_REGOFFSET) +#endif /* ADC_SMPR0_SMP31 */ + +#define ADC_CHANNEL_SMPx_BITOFFSET_MASK ((uint32_t)0x01F00000U) +#define ADC_CHANNEL_SMPx_BITOFFSET_POS ((uint32_t)20U) /* Value equivalent to POSITION_VAL(ADC_CHANNEL_SMPx_BITOFFSET_MASK) */ + +/* Definition of channels ID number information to be inserted into */ +/* channels literals definition. */ +#define ADC_CHANNEL_0_NUMBER ((uint32_t)0x00000000U) +#define ADC_CHANNEL_1_NUMBER ( ADC_CR1_AWDCH_0) +#define ADC_CHANNEL_2_NUMBER ( ADC_CR1_AWDCH_1 ) +#define ADC_CHANNEL_3_NUMBER ( ADC_CR1_AWDCH_1 | ADC_CR1_AWDCH_0) +#define ADC_CHANNEL_4_NUMBER ( ADC_CR1_AWDCH_2 ) +#define ADC_CHANNEL_5_NUMBER ( ADC_CR1_AWDCH_2 | ADC_CR1_AWDCH_0) +#define ADC_CHANNEL_6_NUMBER ( ADC_CR1_AWDCH_2 | ADC_CR1_AWDCH_1 ) +#define ADC_CHANNEL_7_NUMBER ( ADC_CR1_AWDCH_2 | ADC_CR1_AWDCH_1 | ADC_CR1_AWDCH_0) +#define ADC_CHANNEL_8_NUMBER ( ADC_CR1_AWDCH_3 ) +#define ADC_CHANNEL_9_NUMBER ( ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_0) +#define ADC_CHANNEL_10_NUMBER ( ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_1 ) +#define ADC_CHANNEL_11_NUMBER ( ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_1 | ADC_CR1_AWDCH_0) +#define ADC_CHANNEL_12_NUMBER ( ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_2 ) +#define ADC_CHANNEL_13_NUMBER ( ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_2 | ADC_CR1_AWDCH_0) +#define ADC_CHANNEL_14_NUMBER ( ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_2 | ADC_CR1_AWDCH_1 ) +#define ADC_CHANNEL_15_NUMBER ( ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_2 | ADC_CR1_AWDCH_1 | ADC_CR1_AWDCH_0) +#define ADC_CHANNEL_16_NUMBER (ADC_CR1_AWDCH_4 ) +#define ADC_CHANNEL_17_NUMBER (ADC_CR1_AWDCH_4 | ADC_CR1_AWDCH_0) +#define ADC_CHANNEL_18_NUMBER (ADC_CR1_AWDCH_4 | ADC_CR1_AWDCH_1 ) +#define ADC_CHANNEL_19_NUMBER (ADC_CR1_AWDCH_4 | ADC_CR1_AWDCH_1 | ADC_CR1_AWDCH_0) +#define ADC_CHANNEL_20_NUMBER (ADC_CR1_AWDCH_4 | ADC_CR1_AWDCH_2 ) +#define ADC_CHANNEL_21_NUMBER (ADC_CR1_AWDCH_4 | ADC_CR1_AWDCH_2 | ADC_CR1_AWDCH_0) +#define ADC_CHANNEL_22_NUMBER (ADC_CR1_AWDCH_4 | ADC_CR1_AWDCH_2 | ADC_CR1_AWDCH_1 ) +#define ADC_CHANNEL_23_NUMBER (ADC_CR1_AWDCH_4 | ADC_CR1_AWDCH_2 | ADC_CR1_AWDCH_1 | ADC_CR1_AWDCH_0) +#define ADC_CHANNEL_24_NUMBER (ADC_CR1_AWDCH_4 | ADC_CR1_AWDCH_3 ) +#define ADC_CHANNEL_25_NUMBER (ADC_CR1_AWDCH_4 | ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_0) +#define ADC_CHANNEL_26_NUMBER (ADC_CR1_AWDCH_4 | ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_1 ) +#if defined(ADC_SMPR0_SMP31) +#define ADC_CHANNEL_27_NUMBER (ADC_CR1_AWDCH_4 | ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_1 | ADC_CR1_AWDCH_0) +#define ADC_CHANNEL_28_NUMBER (ADC_CR1_AWDCH_4 | ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_2 ) +#define ADC_CHANNEL_29_NUMBER (ADC_CR1_AWDCH_4 | ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_2 | ADC_CR1_AWDCH_0) +#define ADC_CHANNEL_30_NUMBER (ADC_CR1_AWDCH_4 | ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_2 | ADC_CR1_AWDCH_1 ) +#define ADC_CHANNEL_31_NUMBER (ADC_CR1_AWDCH_4 | ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_2 | ADC_CR1_AWDCH_1 | ADC_CR1_AWDCH_0) +#endif /* ADC_SMPR0_SMP31 */ + +/* Definition of channels sampling time information to be inserted into */ +/* channels literals definition. */ +#define ADC_CHANNEL_0_SMP (ADC_SMPR3_REGOFFSET | (((uint32_t) 0U) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to POSITION_VAL(ADC_SMPR3_SMP0) */ +#define ADC_CHANNEL_1_SMP (ADC_SMPR3_REGOFFSET | (((uint32_t) 3U) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to POSITION_VAL(ADC_SMPR3_SMP1) */ +#define ADC_CHANNEL_2_SMP (ADC_SMPR3_REGOFFSET | (((uint32_t) 6U) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to POSITION_VAL(ADC_SMPR3_SMP2) */ +#define ADC_CHANNEL_3_SMP (ADC_SMPR3_REGOFFSET | (((uint32_t) 9U) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to POSITION_VAL(ADC_SMPR3_SMP3) */ +#define ADC_CHANNEL_4_SMP (ADC_SMPR3_REGOFFSET | (((uint32_t)12U) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to POSITION_VAL(ADC_SMPR3_SMP4) */ +#define ADC_CHANNEL_5_SMP (ADC_SMPR3_REGOFFSET | (((uint32_t)15U) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to POSITION_VAL(ADC_SMPR3_SMP5) */ +#define ADC_CHANNEL_6_SMP (ADC_SMPR3_REGOFFSET | (((uint32_t)18U) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to POSITION_VAL(ADC_SMPR3_SMP6) */ +#define ADC_CHANNEL_7_SMP (ADC_SMPR3_REGOFFSET | (((uint32_t)21U) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to POSITION_VAL(ADC_SMPR3_SMP7) */ +#define ADC_CHANNEL_8_SMP (ADC_SMPR3_REGOFFSET | (((uint32_t)24U) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to POSITION_VAL(ADC_SMPR3_SMP8) */ +#define ADC_CHANNEL_9_SMP (ADC_SMPR3_REGOFFSET | (((uint32_t)27U) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to POSITION_VAL(ADC_SMPR3_SMP9) */ +#define ADC_CHANNEL_10_SMP (ADC_SMPR2_REGOFFSET | (((uint32_t) 0U) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to POSITION_VAL(ADC_SMPR2_SMP10) */ +#define ADC_CHANNEL_11_SMP (ADC_SMPR2_REGOFFSET | (((uint32_t) 3U) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to POSITION_VAL(ADC_SMPR2_SMP11) */ +#define ADC_CHANNEL_12_SMP (ADC_SMPR2_REGOFFSET | (((uint32_t) 6U) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to POSITION_VAL(ADC_SMPR2_SMP12) */ +#define ADC_CHANNEL_13_SMP (ADC_SMPR2_REGOFFSET | (((uint32_t) 9U) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to POSITION_VAL(ADC_SMPR2_SMP13) */ +#define ADC_CHANNEL_14_SMP (ADC_SMPR2_REGOFFSET | (((uint32_t)12U) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to POSITION_VAL(ADC_SMPR2_SMP14) */ +#define ADC_CHANNEL_15_SMP (ADC_SMPR2_REGOFFSET | (((uint32_t)15U) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to POSITION_VAL(ADC_SMPR2_SMP15) */ +#define ADC_CHANNEL_16_SMP (ADC_SMPR2_REGOFFSET | (((uint32_t)18U) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to POSITION_VAL(ADC_SMPR2_SMP16) */ +#define ADC_CHANNEL_17_SMP (ADC_SMPR2_REGOFFSET | (((uint32_t)21U) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to POSITION_VAL(ADC_SMPR2_SMP17) */ +#define ADC_CHANNEL_18_SMP (ADC_SMPR2_REGOFFSET | (((uint32_t)24U) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to POSITION_VAL(ADC_SMPR2_SMP18) */ +#define ADC_CHANNEL_19_SMP (ADC_SMPR2_REGOFFSET | (((uint32_t)27U) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to POSITION_VAL(ADC_SMPR2_SMP19) */ +#define ADC_CHANNEL_20_SMP (ADC_SMPR1_REGOFFSET | (((uint32_t) 0U) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to POSITION_VAL(ADC_SMPR1_SMP20) */ +#define ADC_CHANNEL_21_SMP (ADC_SMPR1_REGOFFSET | (((uint32_t) 3U) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to POSITION_VAL(ADC_SMPR1_SMP21) */ +#define ADC_CHANNEL_22_SMP (ADC_SMPR1_REGOFFSET | (((uint32_t) 6U) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to POSITION_VAL(ADC_SMPR1_SMP22) */ +#define ADC_CHANNEL_23_SMP (ADC_SMPR1_REGOFFSET | (((uint32_t) 9U) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to POSITION_VAL(ADC_SMPR1_SMP23) */ +#define ADC_CHANNEL_24_SMP (ADC_SMPR1_REGOFFSET | (((uint32_t)12U) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to POSITION_VAL(ADC_SMPR1_SMP24) */ +#define ADC_CHANNEL_25_SMP (ADC_SMPR1_REGOFFSET | (((uint32_t)15U) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to POSITION_VAL(ADC_SMPR1_SMP25) */ +#define ADC_CHANNEL_26_SMP (ADC_SMPR1_REGOFFSET | (((uint32_t)18U) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to POSITION_VAL(ADC_SMPR1_SMP26) */ +#if defined(ADC_SMPR0_SMP31) +#define ADC_CHANNEL_27_SMP (ADC_SMPR1_REGOFFSET | (((uint32_t)21U) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to POSITION_VAL(ADC_SMPR1_SMP27) */ +#define ADC_CHANNEL_28_SMP (ADC_SMPR1_REGOFFSET | (((uint32_t)24U) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to POSITION_VAL(ADC_SMPR1_SMP28) */ +#define ADC_CHANNEL_29_SMP (ADC_SMPR1_REGOFFSET | (((uint32_t)27U) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to POSITION_VAL(ADC_SMPR1_SMP19) */ +#define ADC_CHANNEL_30_SMP (ADC_SMPR0_REGOFFSET | (((uint32_t) 0U) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to POSITION_VAL(ADC_SMPR0_SMP30) */ +#define ADC_CHANNEL_31_SMP (ADC_SMPR0_REGOFFSET | (((uint32_t) 3U) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to POSITION_VAL(ADC_SMPR0_SMP31) */ +#endif /* ADC_SMPR0_SMP31 */ + + +/* Internal mask for ADC analog watchdog: */ +/* To select into literals LL_ADC_AWD_CHANNELx_xxx the relevant bits for: */ +/* (concatenation of multiple bits used in different analog watchdogs, */ +/* (feature of several watchdogs not available on all STM32 families)). */ +/* - analog watchdog 1: monitored channel defined by number, */ +/* selection of ADC group (ADC groups regular and-or injected). */ + +/* Internal register offset for ADC analog watchdog channel configuration */ +#define ADC_AWD_CR1_REGOFFSET ((uint32_t)0x00000000U) + +#define ADC_AWD_CRX_REGOFFSET_MASK (ADC_AWD_CR1_REGOFFSET) + +#define ADC_AWD_CR1_CHANNEL_MASK (ADC_CR1_AWDCH | ADC_CR1_JAWDEN | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) +#define ADC_AWD_CR_ALL_CHANNEL_MASK (ADC_AWD_CR1_CHANNEL_MASK) + +/* Internal register offset for ADC analog watchdog threshold configuration */ +#define ADC_AWD_TR1_HIGH_REGOFFSET ((uint32_t)0x00000000U) +#define ADC_AWD_TR1_LOW_REGOFFSET ((uint32_t)0x00000001U) +#define ADC_AWD_TRX_REGOFFSET_MASK (ADC_AWD_TR1_HIGH_REGOFFSET | ADC_AWD_TR1_LOW_REGOFFSET) + + +/* ADC registers bits positions */ +#define ADC_CR1_RES_BITOFFSET_POS ((uint32_t)24U) /* Value equivalent to POSITION_VAL(ADC_CR1_RES) */ +#define ADC_TR_HT_BITOFFSET_POS ((uint32_t)16U) /* Value equivalent to POSITION_VAL(ADC_TR_HT) */ + + +/* ADC internal channels related definitions */ +/* Internal voltage reference VrefInt */ +#define VREFINT_CAL_ADDR ((uint16_t*) ((uint32_t)0x1FF800F8U)) /* Internal voltage reference, address of parameter VREFINT_CAL: VrefInt ADC raw data acquired at temperature 30 DegC (tolerance: +-5 DegC), Vref+ = 3.0 V (tolerance: +-10 mV). */ +#define VREFINT_CAL_VREF ((uint32_t) 3000U) /* Analog voltage reference (Vref+) value with which temperature sensor has been calibrated in production (tolerance: +-10 mV) (unit: mV). */ +/* Temperature sensor */ +#define TEMPSENSOR_CAL1_ADDR ((uint16_t*) ((uint32_t)0x1FF800FAU)) /* Internal temperature sensor, address of parameter TS_CAL1: On STM32L1, temperature sensor ADC raw data acquired at temperature 30 DegC (tolerance: +-5 DegC), Vref+ = 3.0 V (tolerance: +-10 mV). */ +#define TEMPSENSOR_CAL2_ADDR ((uint16_t*) ((uint32_t)0x1FF800FEU)) /* Internal temperature sensor, address of parameter TS_CAL2: On STM32L1, temperature sensor ADC raw data acquired at temperature 110 DegC (tolerance: +-5 DegC), Vref+ = 3.0 V (tolerance: +-10 mV). */ +#define TEMPSENSOR_CAL1_TEMP (( int32_t) 30) /* Internal temperature sensor, temperature at which temperature sensor has been calibrated in production for data into TEMPSENSOR_CAL1_ADDR (tolerance: +-5 DegC) (unit: DegC). */ +#define TEMPSENSOR_CAL2_TEMP (( int32_t) 110) /* Internal temperature sensor, temperature at which temperature sensor has been calibrated in production for data into TEMPSENSOR_CAL2_ADDR (tolerance: +-5 DegC) (unit: DegC). */ +#define TEMPSENSOR_CAL_VREFANALOG ((uint32_t) 3000U) /* Analog voltage reference (Vref+) voltage with which temperature sensor has been calibrated in production (+-10 mV) (unit: mV). */ + + +/** + * @} + */ + + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup ADC_LL_Private_Macros ADC Private Macros + * @{ + */ + +/** + * @brief Driver macro reserved for internal use: isolate bits with the + * selected mask and shift them to the register LSB + * (shift mask on register position bit 0). + * @param __BITS__ Bits in register 32 bits + * @param __MASK__ Mask in register 32 bits + * @retval Bits in register 32 bits + */ +#define __ADC_MASK_SHIFT(__BITS__, __MASK__) \ + (((__BITS__) & (__MASK__)) >> POSITION_VAL((__MASK__))) + +/** + * @brief Driver macro reserved for internal use: set a pointer to + * a register from a register basis from which an offset + * is applied. + * @param __REG__ Register basis from which the offset is applied. + * @param __REG_OFFFSET__ Offset to be applied (unit: number of registers). + * @retval Pointer to register address + */ +#define __ADC_PTR_REG_OFFSET(__REG__, __REG_OFFFSET__) \ + ((uint32_t *)((uint32_t) ((uint32_t)(&(__REG__)) + ((__REG_OFFFSET__) << 2U)))) + +/** + * @} + */ + + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup ADC_LL_ES_INIT ADC Exported Init structure + * @{ + */ + +/** + * @brief Structure definition of some features of ADC common parameters + * and multimode + * (all ADC instances belonging to the same ADC common instance). + * @note The setting of these parameters by function @ref LL_ADC_CommonInit() + * is conditioned to ADC instances state (all ADC instances + * sharing the same ADC common instance): + * All ADC instances sharing the same ADC common instance must be + * disabled. + */ +typedef struct +{ + uint32_t CommonClock; /*!< Set parameter common to several ADC: Clock source and prescaler. + This parameter can be a value of @ref ADC_LL_EC_COMMON_CLOCK_SOURCE + @note On this STM32 serie, HSI RC oscillator is the only clock source for ADC. + Therefore, HSI RC oscillator must be preliminarily enabled at RCC top level. + @note On this STM32 serie, some clock ratio constraints between ADC clock and APB clock + must be respected: + - In all cases: if APB clock frequency is too low compared ADC clock frequency, a delay between conversions must be inserted. + - If ADC group injected is used: ADC clock frequency should be lower than APB clock frequency /4 for resolution 12 or 10 bits, APB clock frequency /3 for resolution 8 bits, APB clock frequency /2 for resolution 6 bits. + Refer to reference manual. + + This feature can be modified afterwards using unitary function @ref LL_ADC_SetCommonClock(). */ + +} LL_ADC_CommonInitTypeDef; + +/** + * @brief Structure definition of some features of ADC instance. + * @note These parameters have an impact on ADC scope: ADC instance. + * Affects both group regular and group injected (availability + * of ADC group injected depends on STM32 families). + * Refer to corresponding unitary functions into + * @ref ADC_LL_EF_Configuration_ADC_Instance . + * @note The setting of these parameters by function @ref LL_ADC_Init() + * is conditioned to ADC state: + * ADC instance must be disabled. + * This condition is applied to all ADC features, for efficiency + * and compatibility over all STM32 families. However, the different + * features can be set under different ADC state conditions + * (setting possible with ADC enabled without conversion on going, + * ADC enabled with conversion on going, ...) + * Each feature can be updated afterwards with a unitary function + * and potentially with ADC in a different state than disabled, + * refer to description of each function for setting + * conditioned to ADC state. + */ +typedef struct +{ + uint32_t Resolution; /*!< Set ADC resolution. + This parameter can be a value of @ref ADC_LL_EC_RESOLUTION + + This feature can be modified afterwards using unitary function @ref LL_ADC_SetResolution(). */ + + uint32_t DataAlignment; /*!< Set ADC conversion data alignment. + This parameter can be a value of @ref ADC_LL_EC_DATA_ALIGN + + This feature can be modified afterwards using unitary function @ref LL_ADC_SetDataAlignment(). */ + + uint32_t LowPowerMode; /*!< Set ADC low power mode. + This parameter can be a concatenation of a value of @ref ADC_LL_EC_LP_MODE_AUTOWAIT and a value of @ref ADC_LL_EC_LP_MODE_AUTOPOWEROFF + + This feature can be modified afterwards using unitary function @ref LL_ADC_SetLowPowerModeAutoWait() and @ref LL_ADC_SetLowPowerModeAutoPowerOff(). */ + + uint32_t SequencersScanMode; /*!< Set ADC scan selection. + This parameter can be a value of @ref ADC_LL_EC_SCAN_SELECTION + + This feature can be modified afterwards using unitary function @ref LL_ADC_SetSequencersScanMode(). */ + +} LL_ADC_InitTypeDef; + +/** + * @brief Structure definition of some features of ADC group regular. + * @note These parameters have an impact on ADC scope: ADC group regular. + * Refer to corresponding unitary functions into + * @ref ADC_LL_EF_Configuration_ADC_Group_Regular + * (functions with prefix "REG"). + * @note The setting of these parameters by function @ref LL_ADC_REG_Init() + * is conditioned to ADC state: + * ADC instance must be disabled. + * This condition is applied to all ADC features, for efficiency + * and compatibility over all STM32 families. However, the different + * features can be set under different ADC state conditions + * (setting possible with ADC enabled without conversion on going, + * ADC enabled with conversion on going, ...) + * Each feature can be updated afterwards with a unitary function + * and potentially with ADC in a different state than disabled, + * refer to description of each function for setting + * conditioned to ADC state. + */ +typedef struct +{ + uint32_t TriggerSource; /*!< Set ADC group regular conversion trigger source: internal (SW start) or from external IP (timer event, external interrupt line). + This parameter can be a value of @ref ADC_LL_EC_REG_TRIGGER_SOURCE + @note On this STM32 serie, setting of external trigger edge is performed + using function @ref LL_ADC_REG_StartConversionExtTrig(). + + This feature can be modified afterwards using unitary function @ref LL_ADC_REG_SetTriggerSource(). */ + + uint32_t SequencerLength; /*!< Set ADC group regular sequencer length. + This parameter can be a value of @ref ADC_LL_EC_REG_SEQ_SCAN_LENGTH + @note This parameter is discarded if scan mode is disabled (refer to parameter 'ADC_SequencersScanMode'). + + This feature can be modified afterwards using unitary function @ref LL_ADC_REG_SetSequencerLength(). */ + + uint32_t SequencerDiscont; /*!< Set ADC group regular sequencer discontinuous mode: sequence subdivided and scan conversions interrupted every selected number of ranks. + This parameter can be a value of @ref ADC_LL_EC_REG_SEQ_DISCONT_MODE + @note This parameter has an effect only if group regular sequencer is enabled + (scan length of 2 ranks or more). + + This feature can be modified afterwards using unitary function @ref LL_ADC_REG_SetSequencerDiscont(). */ + + uint32_t ContinuousMode; /*!< Set ADC continuous conversion mode on ADC group regular, whether ADC conversions are performed in single mode (one conversion per trigger) or in continuous mode (after the first trigger, following conversions launched successively automatically). + This parameter can be a value of @ref ADC_LL_EC_REG_CONTINUOUS_MODE + Note: It is not possible to enable both ADC group regular continuous mode and discontinuous mode. + + This feature can be modified afterwards using unitary function @ref LL_ADC_REG_SetContinuousMode(). */ + + uint32_t DMATransfer; /*!< Set ADC group regular conversion data transfer: no transfer or transfer by DMA, and DMA requests mode. + This parameter can be a value of @ref ADC_LL_EC_REG_DMA_TRANSFER + + This feature can be modified afterwards using unitary function @ref LL_ADC_REG_SetDMATransfer(). */ + +} LL_ADC_REG_InitTypeDef; + +/** + * @brief Structure definition of some features of ADC group injected. + * @note These parameters have an impact on ADC scope: ADC group injected. + * Refer to corresponding unitary functions into + * @ref ADC_LL_EF_Configuration_ADC_Group_Regular + * (functions with prefix "INJ"). + * @note The setting of these parameters by function @ref LL_ADC_INJ_Init() + * is conditioned to ADC state: + * ADC instance must be disabled. + * This condition is applied to all ADC features, for efficiency + * and compatibility over all STM32 families. However, the different + * features can be set under different ADC state conditions + * (setting possible with ADC enabled without conversion on going, + * ADC enabled with conversion on going, ...) + * Each feature can be updated afterwards with a unitary function + * and potentially with ADC in a different state than disabled, + * refer to description of each function for setting + * conditioned to ADC state. + */ +typedef struct +{ + uint32_t TriggerSource; /*!< Set ADC group injected conversion trigger source: internal (SW start) or from external IP (timer event, external interrupt line). + This parameter can be a value of @ref ADC_LL_EC_INJ_TRIGGER_SOURCE + @note On this STM32 serie, setting of external trigger edge is performed + using function @ref LL_ADC_INJ_StartConversionExtTrig(). + + This feature can be modified afterwards using unitary function @ref LL_ADC_INJ_SetTriggerSource(). */ + + uint32_t SequencerLength; /*!< Set ADC group injected sequencer length. + This parameter can be a value of @ref ADC_LL_EC_INJ_SEQ_SCAN_LENGTH + @note This parameter is discarded if scan mode is disabled (refer to parameter 'ADC_SequencersScanMode'). + + This feature can be modified afterwards using unitary function @ref LL_ADC_INJ_SetSequencerLength(). */ + + uint32_t SequencerDiscont; /*!< Set ADC group injected sequencer discontinuous mode: sequence subdivided and scan conversions interrupted every selected number of ranks. + This parameter can be a value of @ref ADC_LL_EC_INJ_SEQ_DISCONT_MODE + @note This parameter has an effect only if group injected sequencer is enabled + (scan length of 2 ranks or more). + + This feature can be modified afterwards using unitary function @ref LL_ADC_INJ_SetSequencerDiscont(). */ + + uint32_t TrigAuto; /*!< Set ADC group injected conversion trigger: independent or from ADC group regular. + This parameter can be a value of @ref ADC_LL_EC_INJ_TRIG_AUTO + Note: This parameter must be set to set to independent trigger if injected trigger source is set to an external trigger. + + This feature can be modified afterwards using unitary function @ref LL_ADC_INJ_SetTrigAuto(). */ + +} LL_ADC_INJ_InitTypeDef; + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup ADC_LL_Exported_Constants ADC Exported Constants + * @{ + */ + +/** @defgroup ADC_LL_EC_FLAG ADC flags + * @brief Flags defines which can be used with LL_ADC_ReadReg function + * @{ + */ +#define LL_ADC_FLAG_ADRDY ADC_SR_ADONS /*!< ADC flag ADC instance ready */ +#define LL_ADC_FLAG_STRT ADC_SR_STRT /*!< ADC flag ADC group regular conversion start */ +#define LL_ADC_FLAG_EOCS ADC_SR_EOC /*!< ADC flag ADC group regular end of unitary conversion or sequence conversions (to configure flag of end of conversion, use function @ref LL_ADC_REG_SetFlagEndOfConversion() ) */ +#define LL_ADC_FLAG_OVR ADC_SR_OVR /*!< ADC flag ADC group regular overrun */ +#define LL_ADC_FLAG_JSTRT ADC_SR_JSTRT /*!< ADC flag ADC group injected conversion start */ +#define LL_ADC_FLAG_JEOS ADC_SR_JEOC /*!< ADC flag ADC group injected end of sequence conversions (Note: on this STM32 serie, there is no flag ADC group injected end of unitary conversion. Flag noted as "JEOC" is corresponding to flag "JEOS" in other STM32 families) */ +#define LL_ADC_FLAG_AWD1 ADC_SR_AWD /*!< ADC flag ADC analog watchdog 1 */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_IT ADC interruptions for configuration (interruption enable or disable) + * @brief IT defines which can be used with LL_ADC_ReadReg and LL_ADC_WriteReg functions + * @{ + */ +#define LL_ADC_IT_EOCS ADC_CR1_EOCIE /*!< ADC interruption ADC group regular end of unitary conversion or sequence conversions (to configure flag of end of conversion, use function @ref LL_ADC_REG_SetFlagEndOfConversion() ) */ +#define LL_ADC_IT_OVR ADC_CR1_OVRIE /*!< ADC interruption ADC group regular overrun */ +#define LL_ADC_IT_JEOS ADC_CR1_JEOCIE /*!< ADC interruption ADC group injected end of sequence conversions (Note: on this STM32 serie, there is no flag ADC group injected end of unitary conversion. Flag noted as "JEOC" is corresponding to flag "JEOS" in other STM32 families) */ +#define LL_ADC_IT_AWD1 ADC_CR1_AWDIE /*!< ADC interruption ADC analog watchdog 1 */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_REGISTERS ADC registers compliant with specific purpose + * @{ + */ +/* List of ADC registers intended to be used (most commonly) with */ +/* DMA transfer. */ +/* Refer to function @ref LL_ADC_DMA_GetRegAddr(). */ +#define LL_ADC_DMA_REG_REGULAR_DATA ((uint32_t)0x00000000U) /* ADC group regular conversion data register (corresponding to register DR) to be used with ADC configured in independent mode. Without DMA transfer, register accessed by LL function @ref LL_ADC_REG_ReadConversionData32() and other functions @ref LL_ADC_REG_ReadConversionDatax() */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_COMMON_CLOCK_SOURCE ADC common - Clock source + * @{ + */ +#define LL_ADC_CLOCK_ASYNC_DIV1 ((uint32_t)0x00000000U) /*!< ADC asynchronous clock without prescaler */ +#define LL_ADC_CLOCK_ASYNC_DIV2 (ADC_CCR_ADCPRE_0) /*!< ADC asynchronous clock with prescaler division by 2 */ +#define LL_ADC_CLOCK_ASYNC_DIV4 (ADC_CCR_ADCPRE_1) /*!< ADC asynchronous clock with prescaler division by 4 */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_COMMON_PATH_INTERNAL ADC common - Measurement path to internal channels + * @{ + */ +/* Note: Other measurement paths to internal channels may be available */ +/* (connections to other peripherals). */ +/* If they are not listed below, they do not require any specific */ +/* path enable. In this case, Access to measurement path is done */ +/* only by selecting the corresponding ADC internal channel. */ +#define LL_ADC_PATH_INTERNAL_NONE ((uint32_t)0x00000000U)/*!< ADC measurement pathes all disabled */ +#define LL_ADC_PATH_INTERNAL_VREFINT (ADC_CCR_TSVREFE) /*!< ADC measurement path to internal channel VrefInt */ +#define LL_ADC_PATH_INTERNAL_TEMPSENSOR (ADC_CCR_TSVREFE) /*!< ADC measurement path to internal channel temperature sensor */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_RESOLUTION ADC instance - Resolution + * @{ + */ +#define LL_ADC_RESOLUTION_12B ((uint32_t)0x00000000U) /*!< ADC resolution 12 bits */ +#define LL_ADC_RESOLUTION_10B ( ADC_CR1_RES_0) /*!< ADC resolution 10 bits */ +#define LL_ADC_RESOLUTION_8B (ADC_CR1_RES_1 ) /*!< ADC resolution 8 bits */ +#define LL_ADC_RESOLUTION_6B (ADC_CR1_RES_1 | ADC_CR1_RES_0) /*!< ADC resolution 6 bits */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_DATA_ALIGN ADC instance - Data alignment + * @{ + */ +#define LL_ADC_DATA_ALIGN_RIGHT ((uint32_t)0x00000000U)/*!< ADC conversion data alignment: right aligned (alignment on data register LSB bit 0)*/ +#define LL_ADC_DATA_ALIGN_LEFT (ADC_CR2_ALIGN) /*!< ADC conversion data alignment: left aligned (aligment on data register MSB bit 15)*/ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_LP_MODE_AUTOWAIT ADC instance - Low power mode auto wait (auto delay) + * @{ + */ +#define LL_ADC_LP_AUTOWAIT_NONE ((uint32_t)0x00000000U) /*!< ADC low power mode auto wait not activated */ +#define LL_ADC_LP_AUTOWAIT ( ADC_CR2_DELS_0) /*!< ADC low power mode auto wait: Dynamic low power mode, ADC conversions are performed only when necessary (when previous ADC conversion data is read). See description with function @ref LL_ADC_SetLowPowerModeAutoWait(). */ +#define LL_ADC_LP_AUTOWAIT_7_APBCLOCKCYCLES ( ADC_CR2_DELS_1 ) /*!< ADC low power mode auto wait: Insert a delay between ADC conversions: 7 APB clock cycles */ +#define LL_ADC_LP_AUTOWAIT_15_APBCLOCKCYCLES ( ADC_CR2_DELS_1 | ADC_CR2_DELS_0) /*!< ADC low power mode auto wait: Insert a delay between ADC conversions: 15 APB clock cycles */ +#define LL_ADC_LP_AUTOWAIT_31_APBCLOCKCYCLES (ADC_CR2_DELS_2 ) /*!< ADC low power mode auto wait: Insert a delay between ADC conversions: 31 APB clock cycles */ +#define LL_ADC_LP_AUTOWAIT_63_APBCLOCKCYCLES (ADC_CR2_DELS_2 | ADC_CR2_DELS_0) /*!< ADC low power mode auto wait: Insert a delay between ADC conversions: 63 APB clock cycles */ +#define LL_ADC_LP_AUTOWAIT_127_APBCLOCKCYCLES (ADC_CR2_DELS_2 | ADC_CR2_DELS_1 ) /*!< ADC low power mode auto wait: Insert a delay between ADC conversions: 127 APB clock cycles */ +#define LL_ADC_LP_AUTOWAIT_255_APBCLOCKCYCLES (ADC_CR2_DELS_2 | ADC_CR2_DELS_1 | ADC_CR2_DELS_0) /*!< ADC low power mode auto wait: Insert a delay between ADC conversions: 255 APB clock cycles */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_LP_MODE_AUTOPOWEROFF ADC instance - Low power mode auto power-off + * @{ + */ +#define LL_ADC_LP_AUTOPOWEROFF_NONE ((uint32_t)0x00000000U) /*!< ADC low power mode auto power-off not activated */ +#define LL_ADC_LP_AUTOPOWEROFF_IDLE_PHASE (ADC_CR1_PDI) /*!< ADC low power mode auto power-off: ADC power off when ADC is not converting (idle phase) */ +#define LL_ADC_LP_AUTOPOWEROFF_AUTOWAIT_PHASE (ADC_CR1_PDD) /*!< ADC low power mode auto power-off: ADC power off when a delay is inserted between conversions (refer to function @ref LL_ADC_SetLowPowerModeAutoWait() ) */ +#define LL_ADC_LP_AUTOPOWEROFF_IDLE_AUTOWAIT_PHASES (ADC_CR1_PDI | ADC_CR1_PDD) /*!< ADC low power mode auto power-off: ADC power off when ADC is not converting (idle phase) and when a delay is inserted between conversions (refer to function @ref LL_ADC_SetLowPowerModeAutoWait() ) */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_SCAN_SELECTION ADC instance - Scan selection + * @{ + */ +#define LL_ADC_SEQ_SCAN_DISABLE ((uint32_t)0x00000000U) /*!< ADC conversion is performed in unitary conversion mode (one channel converted, that defined in rank 1). Configuration of both groups regular and injected sequencers (sequence length, ...) is discarded: equivalent to length of 1 rank.*/ +#define LL_ADC_SEQ_SCAN_ENABLE ((uint32_t)ADC_CR1_SCAN) /*!< ADC conversions are performed in sequence conversions mode, according to configuration of both groups regular and injected sequencers (sequence length, ...). */ +/** + * @} + */ + +#if defined(ADC_CR2_CFG) +/** @defgroup ADC_LL_EC_CHANNELS_BANK ADC instance - Channels bank + * @{ + */ +#define LL_ADC_CHANNELS_BANK_A ((uint32_t)0x00000000U) /*!< ADC channels bank A */ +#define LL_ADC_CHANNELS_BANK_B ((uint32_t)ADC_CR2_CFG) /*!< ADC channels bank B, available in devices categories 3, 4, 5. */ +/** + * @} + */ +#endif + +/** @defgroup ADC_LL_EC_GROUPS ADC instance - Groups + * @{ + */ +#define LL_ADC_GROUP_REGULAR ((uint32_t)0x00000001U) /*!< ADC group regular (available on all STM32 devices) */ +#define LL_ADC_GROUP_INJECTED ((uint32_t)0x00000002U) /*!< ADC group injected (not available on all STM32 devices)*/ +#define LL_ADC_GROUP_REGULAR_INJECTED ((uint32_t)0x00000003U) /*!< ADC both groups regular and injected */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_CHANNEL ADC instance - Channel number + * @{ + */ +#define LL_ADC_CHANNEL_0 (ADC_CHANNEL_0_NUMBER | ADC_CHANNEL_0_SMP) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN0 . Channel different in bank A and bank B. */ +#define LL_ADC_CHANNEL_1 (ADC_CHANNEL_1_NUMBER | ADC_CHANNEL_1_SMP) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN1 . Channel different in bank A and bank B. */ +#define LL_ADC_CHANNEL_2 (ADC_CHANNEL_2_NUMBER | ADC_CHANNEL_2_SMP) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN2 . Channel different in bank A and bank B. */ +#define LL_ADC_CHANNEL_3 (ADC_CHANNEL_3_NUMBER | ADC_CHANNEL_3_SMP) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN3 . Channel different in bank A and bank B. */ +#define LL_ADC_CHANNEL_4 (ADC_CHANNEL_4_NUMBER | ADC_CHANNEL_4_SMP) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN4 . Direct (fast) channel. */ +#define LL_ADC_CHANNEL_5 (ADC_CHANNEL_5_NUMBER | ADC_CHANNEL_5_SMP) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN5 . Direct (fast) channel. */ +#define LL_ADC_CHANNEL_6 (ADC_CHANNEL_6_NUMBER | ADC_CHANNEL_6_SMP) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN6 . Channel different in bank A and bank B. */ +#define LL_ADC_CHANNEL_7 (ADC_CHANNEL_7_NUMBER | ADC_CHANNEL_7_SMP) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN7 . Channel different in bank A and bank B. */ +#define LL_ADC_CHANNEL_8 (ADC_CHANNEL_8_NUMBER | ADC_CHANNEL_8_SMP) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN8 . Channel different in bank A and bank B. */ +#define LL_ADC_CHANNEL_9 (ADC_CHANNEL_9_NUMBER | ADC_CHANNEL_9_SMP) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN9 . Channel different in bank A and bank B. */ +#define LL_ADC_CHANNEL_10 (ADC_CHANNEL_10_NUMBER | ADC_CHANNEL_10_SMP) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN10. Channel different in bank A and bank B. */ +#define LL_ADC_CHANNEL_11 (ADC_CHANNEL_11_NUMBER | ADC_CHANNEL_11_SMP) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN11. Channel different in bank A and bank B. */ +#define LL_ADC_CHANNEL_12 (ADC_CHANNEL_12_NUMBER | ADC_CHANNEL_12_SMP) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN12. Channel different in bank A and bank B. */ +#define LL_ADC_CHANNEL_13 (ADC_CHANNEL_13_NUMBER | ADC_CHANNEL_13_SMP) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN13. Channel common to both bank A and bank B. */ +#define LL_ADC_CHANNEL_14 (ADC_CHANNEL_14_NUMBER | ADC_CHANNEL_14_SMP) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN14. Channel common to both bank A and bank B. */ +#define LL_ADC_CHANNEL_15 (ADC_CHANNEL_15_NUMBER | ADC_CHANNEL_15_SMP) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN15. Channel common to both bank A and bank B. */ +#define LL_ADC_CHANNEL_16 (ADC_CHANNEL_16_NUMBER | ADC_CHANNEL_16_SMP) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN16. Channel common to both bank A and bank B. */ +#define LL_ADC_CHANNEL_17 (ADC_CHANNEL_17_NUMBER | ADC_CHANNEL_17_SMP) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN17. Channel common to both bank A and bank B. */ +#define LL_ADC_CHANNEL_18 (ADC_CHANNEL_18_NUMBER | ADC_CHANNEL_18_SMP) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN18. Channel common to both bank A and bank B. */ +#define LL_ADC_CHANNEL_19 (ADC_CHANNEL_19_NUMBER | ADC_CHANNEL_19_SMP) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN19. Channel common to both bank A and bank B. */ +#define LL_ADC_CHANNEL_20 (ADC_CHANNEL_20_NUMBER | ADC_CHANNEL_20_SMP) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN20. Channel common to both bank A and bank B. */ +#define LL_ADC_CHANNEL_21 (ADC_CHANNEL_21_NUMBER | ADC_CHANNEL_21_SMP) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN21. Channel common to both bank A and bank B. */ +#define LL_ADC_CHANNEL_22 (ADC_CHANNEL_22_NUMBER | ADC_CHANNEL_22_SMP) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN22. Direct (fast) channel. */ +#define LL_ADC_CHANNEL_23 (ADC_CHANNEL_23_NUMBER | ADC_CHANNEL_23_SMP) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN23. Direct (fast) channel. */ +#define LL_ADC_CHANNEL_24 (ADC_CHANNEL_24_NUMBER | ADC_CHANNEL_24_SMP) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN24. Direct (fast) channel. */ +#define LL_ADC_CHANNEL_25 (ADC_CHANNEL_25_NUMBER | ADC_CHANNEL_25_SMP) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN25. Direct (fast) channel. */ +#define LL_ADC_CHANNEL_26 (ADC_CHANNEL_26_NUMBER | ADC_CHANNEL_26_SMP) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN26. Direct (fast) channel. */ +#if defined(ADC_SMPR0_SMP31) +#define LL_ADC_CHANNEL_27 (ADC_CHANNEL_27_NUMBER | ADC_CHANNEL_27_SMP) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN27. Channel common to both bank A and bank B. On STM32L1, parameter not available on all devices: only on STM32L1 Cat.4 and Cat.5. */ +#define LL_ADC_CHANNEL_28 (ADC_CHANNEL_28_NUMBER | ADC_CHANNEL_28_SMP) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN28. Channel common to both bank A and bank B. On STM32L1, parameter not available on all devices: only on STM32L1 Cat.4 and Cat.5. */ +#define LL_ADC_CHANNEL_29 (ADC_CHANNEL_29_NUMBER | ADC_CHANNEL_29_SMP) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN29. Channel common to both bank A and bank B. On STM32L1, parameter not available on all devices: only on STM32L1 Cat.4 and Cat.5. */ +#define LL_ADC_CHANNEL_30 (ADC_CHANNEL_30_NUMBER | ADC_CHANNEL_30_SMP) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN30. Channel common to both bank A and bank B. On STM32L1, parameter not available on all devices: only on STM32L1 Cat.4 and Cat.5. */ +#define LL_ADC_CHANNEL_31 (ADC_CHANNEL_31_NUMBER | ADC_CHANNEL_31_SMP) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN31. Channel common to both bank A and bank B. On STM32L1, parameter not available on all devices: only on STM32L1 Cat.4 and Cat.5. */ +#endif /* ADC_SMPR0_SMP31 */ +#define LL_ADC_CHANNEL_VREFINT (LL_ADC_CHANNEL_17 | ADC_CHANNEL_ID_INTERNAL_CH) /*!< ADC internal channel connected to VrefInt: Internal voltage reference. Channel common to both bank A and bank B. */ +#define LL_ADC_CHANNEL_TEMPSENSOR (LL_ADC_CHANNEL_16 | ADC_CHANNEL_ID_INTERNAL_CH) /*!< ADC internal channel connected to Temperature sensor. Channel common to both bank A and bank B. */ +#define LL_ADC_CHANNEL_VCOMP (LL_ADC_CHANNEL_26 | ADC_CHANNEL_ID_INTERNAL_CH) /*!< ADC internal channel connected to comparator COMP1 positive input via ADC switch matrix. Channel common to both bank A and bank B. */ +#if defined(OPAMP_CSR_OPA1PD) || defined (OPAMP_CSR_OPA2PD) || defined (OPAMP_CSR_OPA3PD) +#define LL_ADC_CHANNEL_VOPAMP1 (LL_ADC_CHANNEL_3 | ADC_CHANNEL_ID_INTERNAL_CH) /*!< ADC internal channel connected to OPAMP1 output via ADC switch matrix. Channel common to both bank A and bank B. */ +#define LL_ADC_CHANNEL_VOPAMP2 (LL_ADC_CHANNEL_8 | ADC_CHANNEL_ID_INTERNAL_CH) /*!< ADC internal channel connected to OPAMP2 output via ADC switch matrix. Channel common to both bank A and bank B. */ +#if defined(OPAMP_CSR_OPA3PD) +#define LL_ADC_CHANNEL_VOPAMP3 (LL_ADC_CHANNEL_13 | ADC_CHANNEL_ID_INTERNAL_CH) /*!< ADC internal channel connected to OPAMP3 output via ADC switch matrix. Channel common to both bank A and bank B. */ +#endif /* OPAMP_CSR_OPA3PD */ +#endif /* OPAMP_CSR_OPA1PD || OPAMP_CSR_OPA2PD || OPAMP_CSR_OPA3PD */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_REG_TRIGGER_SOURCE ADC group regular - Trigger source + * @{ + */ +#define LL_ADC_REG_TRIG_SOFTWARE ((uint32_t)0x00000000U) /*!< ADC group regular conversion trigger internal: SW start. */ +#define LL_ADC_REG_TRIG_EXT_TIM2_TRGO (ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_1 | ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular conversion trigger from external IP: TIM2 TRGO. Trigger edge set to rising edge (default setting). */ +#define LL_ADC_REG_TRIG_EXT_TIM2_CH3 (ADC_CR2_EXTSEL_1 | ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular conversion trigger from external IP: TIM2 channel 3 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */ +#define LL_ADC_REG_TRIG_EXT_TIM3_TRGO (ADC_CR2_EXTSEL_2 | ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular conversion trigger from external IP: TIM3 TRGO. Trigger edge set to rising edge (default setting). */ +#define LL_ADC_REG_TRIG_EXT_TIM2_CH2 (ADC_CR2_EXTSEL_1 | ADC_CR2_EXTSEL_0 | ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular conversion trigger from external IP: TIM2 channel 2 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */ +#define LL_ADC_REG_TRIG_EXT_TIM3_CH1 (ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_1 | ADC_CR2_EXTSEL_0 | ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular conversion trigger from external IP: TIM3 channel 1 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */ +#define LL_ADC_REG_TRIG_EXT_TIM3_CH3 (ADC_CR2_EXTSEL_3 | ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular conversion trigger from external IP: TIM3 channel 3 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */ +#define LL_ADC_REG_TRIG_EXT_TIM4_TRGO (ADC_CR2_EXTSEL_3 | ADC_CR2_EXTSEL_0 | ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular conversion trigger from external IP: TIM4 TRGO. Trigger edge set to rising edge (default setting). */ +#define LL_ADC_REG_TRIG_EXT_TIM4_CH4 (ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_0 | ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular conversion trigger from external IP: TIM4 channel 4 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */ +#define LL_ADC_REG_TRIG_EXT_TIM6_TRGO (ADC_CR2_EXTSEL_3 | ADC_CR2_EXTSEL_1 | ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular conversion trigger from external IP: TIM6 TRGO. Trigger edge set to rising edge (default setting). */ +#define LL_ADC_REG_TRIG_EXT_TIM9_CH2 (ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular conversion trigger from external IP: TIM9 channel 2 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */ +#define LL_ADC_REG_TRIG_EXT_TIM9_TRGO (ADC_CR2_EXTSEL_0 | ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular conversion trigger from external IP: TIM9 TRGO. Trigger edge set to rising edge (default setting). */ +#define LL_ADC_REG_TRIG_EXT_EXTI_LINE11 (ADC_CR2_EXTSEL_3 | ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_1 | ADC_CR2_EXTSEL_0 | ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular conversion trigger external interrupt line 11. Trigger edge set to rising edge (default setting). */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_REG_TRIGGER_EDGE ADC group regular - Trigger edge + * @{ + */ +#define LL_ADC_REG_TRIG_EXT_RISING ( ADC_CR2_EXTEN_0) /*!< ADC group regular conversion trigger polarity set to rising edge */ +#define LL_ADC_REG_TRIG_EXT_FALLING (ADC_CR2_EXTEN_1 ) /*!< ADC group regular conversion trigger polarity set to falling edge */ +#define LL_ADC_REG_TRIG_EXT_RISINGFALLING (ADC_CR2_EXTEN_1 | ADC_CR2_EXTEN_0) /*!< ADC group regular conversion trigger polarity set to both rising and falling edges */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_REG_CONTINUOUS_MODE ADC group regular - Continuous mode +* @{ +*/ +#define LL_ADC_REG_CONV_SINGLE ((uint32_t)0x00000000U) /*!< ADC conversions are performed in single mode: one conversion per trigger */ +#define LL_ADC_REG_CONV_CONTINUOUS (ADC_CR2_CONT) /*!< ADC conversions are performed in continuous mode: after the first trigger, following conversions launched successively automatically */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_REG_DMA_TRANSFER ADC group regular - DMA transfer of ADC conversion data + * @{ + */ +#define LL_ADC_REG_DMA_TRANSFER_NONE ((uint32_t)0x00000000U) /*!< ADC conversions are not transferred by DMA */ +#define LL_ADC_REG_DMA_TRANSFER_LIMITED ( ADC_CR2_DMA) /*!< ADC conversion data are transferred by DMA, in limited mode (one shot mode): DMA transfer requests are stopped when number of DMA data transfers (number of ADC conversions) is reached. This ADC mode is intended to be used with DMA mode non-circular. */ +#define LL_ADC_REG_DMA_TRANSFER_UNLIMITED (ADC_CR2_DDS | ADC_CR2_DMA) /*!< ADC conversion data are transferred by DMA, in unlimited mode: DMA transfer requests are unlimited, whatever number of DMA data transferred (number of ADC conversions). This ADC mode is intended to be used with DMA mode circular. */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_REG_FLAG_EOC_SELECTION ADC group regular - Flag EOC selection (unitary or sequence conversions) + * @{ + */ +#define LL_ADC_REG_FLAG_EOC_SEQUENCE_CONV ((uint32_t)0x00000000U) /*!< ADC flag EOC (end of unitary conversion) selected */ +#define LL_ADC_REG_FLAG_EOC_UNITARY_CONV ((uint32_t)ADC_CR2_EOCS) /*!< ADC flag EOS (end of sequence conversions) selected */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_REG_SEQ_SCAN_LENGTH ADC group regular - Sequencer scan length + * @{ + */ +#define LL_ADC_REG_SEQ_SCAN_DISABLE ((uint32_t)0x00000000U) /*!< ADC group regular sequencer disable (equivalent to sequencer of 1 rank: ADC conversion on only 1 channel) */ +#define LL_ADC_REG_SEQ_SCAN_ENABLE_2RANKS ( ADC_SQR1_L_0) /*!< ADC group regular sequencer enable with 2 ranks in the sequence */ +#define LL_ADC_REG_SEQ_SCAN_ENABLE_3RANKS ( ADC_SQR1_L_1 ) /*!< ADC group regular sequencer enable with 3 ranks in the sequence */ +#define LL_ADC_REG_SEQ_SCAN_ENABLE_4RANKS ( ADC_SQR1_L_1 | ADC_SQR1_L_0) /*!< ADC group regular sequencer enable with 4 ranks in the sequence */ +#define LL_ADC_REG_SEQ_SCAN_ENABLE_5RANKS ( ADC_SQR1_L_2 ) /*!< ADC group regular sequencer enable with 5 ranks in the sequence */ +#define LL_ADC_REG_SEQ_SCAN_ENABLE_6RANKS ( ADC_SQR1_L_2 | ADC_SQR1_L_0) /*!< ADC group regular sequencer enable with 6 ranks in the sequence */ +#define LL_ADC_REG_SEQ_SCAN_ENABLE_7RANKS ( ADC_SQR1_L_2 | ADC_SQR1_L_1 ) /*!< ADC group regular sequencer enable with 7 ranks in the sequence */ +#define LL_ADC_REG_SEQ_SCAN_ENABLE_8RANKS ( ADC_SQR1_L_2 | ADC_SQR1_L_1 | ADC_SQR1_L_0) /*!< ADC group regular sequencer enable with 8 ranks in the sequence */ +#define LL_ADC_REG_SEQ_SCAN_ENABLE_9RANKS (ADC_SQR1_L_3 ) /*!< ADC group regular sequencer enable with 9 ranks in the sequence */ +#define LL_ADC_REG_SEQ_SCAN_ENABLE_10RANKS (ADC_SQR1_L_3 | ADC_SQR1_L_0) /*!< ADC group regular sequencer enable with 10 ranks in the sequence */ +#define LL_ADC_REG_SEQ_SCAN_ENABLE_11RANKS (ADC_SQR1_L_3 | ADC_SQR1_L_1 ) /*!< ADC group regular sequencer enable with 11 ranks in the sequence */ +#define LL_ADC_REG_SEQ_SCAN_ENABLE_12RANKS (ADC_SQR1_L_3 | ADC_SQR1_L_1 | ADC_SQR1_L_0) /*!< ADC group regular sequencer enable with 12 ranks in the sequence */ +#define LL_ADC_REG_SEQ_SCAN_ENABLE_13RANKS (ADC_SQR1_L_3 | ADC_SQR1_L_2 ) /*!< ADC group regular sequencer enable with 13 ranks in the sequence */ +#define LL_ADC_REG_SEQ_SCAN_ENABLE_14RANKS (ADC_SQR1_L_3 | ADC_SQR1_L_2 | ADC_SQR1_L_0) /*!< ADC group regular sequencer enable with 14 ranks in the sequence */ +#define LL_ADC_REG_SEQ_SCAN_ENABLE_15RANKS (ADC_SQR1_L_3 | ADC_SQR1_L_2 | ADC_SQR1_L_1 ) /*!< ADC group regular sequencer enable with 15 ranks in the sequence */ +#define LL_ADC_REG_SEQ_SCAN_ENABLE_16RANKS (ADC_SQR1_L_3 | ADC_SQR1_L_2 | ADC_SQR1_L_1 | ADC_SQR1_L_0) /*!< ADC group regular sequencer enable with 16 ranks in the sequence */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_REG_SEQ_DISCONT_MODE ADC group regular - Sequencer discontinuous mode + * @{ + */ +#define LL_ADC_REG_SEQ_DISCONT_DISABLE ((uint32_t)0x00000000U) /*!< ADC group regular sequencer discontinuous mode disable */ +#define LL_ADC_REG_SEQ_DISCONT_1RANK ( ADC_CR1_DISCEN) /*!< ADC group regular sequencer discontinuous mode enable with sequence interruption every rank */ +#define LL_ADC_REG_SEQ_DISCONT_2RANKS ( ADC_CR1_DISCNUM_0 | ADC_CR1_DISCEN) /*!< ADC group regular sequencer discontinuous mode enabled with sequence interruption every 2 ranks */ +#define LL_ADC_REG_SEQ_DISCONT_3RANKS ( ADC_CR1_DISCNUM_1 | ADC_CR1_DISCEN) /*!< ADC group regular sequencer discontinuous mode enable with sequence interruption every 3 ranks */ +#define LL_ADC_REG_SEQ_DISCONT_4RANKS ( ADC_CR1_DISCNUM_1 | ADC_CR1_DISCNUM_0 | ADC_CR1_DISCEN) /*!< ADC group regular sequencer discontinuous mode enable with sequence interruption every 4 ranks */ +#define LL_ADC_REG_SEQ_DISCONT_5RANKS (ADC_CR1_DISCNUM_2 | ADC_CR1_DISCEN) /*!< ADC group regular sequencer discontinuous mode enable with sequence interruption every 5 ranks */ +#define LL_ADC_REG_SEQ_DISCONT_6RANKS (ADC_CR1_DISCNUM_2 | ADC_CR1_DISCNUM_0 | ADC_CR1_DISCEN) /*!< ADC group regular sequencer discontinuous mode enable with sequence interruption every 6 ranks */ +#define LL_ADC_REG_SEQ_DISCONT_7RANKS (ADC_CR1_DISCNUM_2 | ADC_CR1_DISCNUM_1 | ADC_CR1_DISCEN) /*!< ADC group regular sequencer discontinuous mode enable with sequence interruption every 7 ranks */ +#define LL_ADC_REG_SEQ_DISCONT_8RANKS (ADC_CR1_DISCNUM_2 | ADC_CR1_DISCNUM_1 | ADC_CR1_DISCNUM_0 | ADC_CR1_DISCEN) /*!< ADC group regular sequencer discontinuous mode enable with sequence interruption every 8 ranks */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_REG_SEQ_RANKS ADC group regular - Sequencer ranks + * @{ + */ +#define LL_ADC_REG_RANK_1 (ADC_SQR5_REGOFFSET | ADC_REG_RANK_1_SQRX_BITOFFSET_POS) /*!< ADC group regular sequencer rank 1 */ +#define LL_ADC_REG_RANK_2 (ADC_SQR5_REGOFFSET | ADC_REG_RANK_2_SQRX_BITOFFSET_POS) /*!< ADC group regular sequencer rank 2 */ +#define LL_ADC_REG_RANK_3 (ADC_SQR5_REGOFFSET | ADC_REG_RANK_3_SQRX_BITOFFSET_POS) /*!< ADC group regular sequencer rank 3 */ +#define LL_ADC_REG_RANK_4 (ADC_SQR5_REGOFFSET | ADC_REG_RANK_4_SQRX_BITOFFSET_POS) /*!< ADC group regular sequencer rank 4 */ +#define LL_ADC_REG_RANK_5 (ADC_SQR5_REGOFFSET | ADC_REG_RANK_5_SQRX_BITOFFSET_POS) /*!< ADC group regular sequencer rank 5 */ +#define LL_ADC_REG_RANK_6 (ADC_SQR5_REGOFFSET | ADC_REG_RANK_6_SQRX_BITOFFSET_POS) /*!< ADC group regular sequencer rank 6 */ +#define LL_ADC_REG_RANK_7 (ADC_SQR4_REGOFFSET | ADC_REG_RANK_7_SQRX_BITOFFSET_POS) /*!< ADC group regular sequencer rank 7 */ +#define LL_ADC_REG_RANK_8 (ADC_SQR4_REGOFFSET | ADC_REG_RANK_8_SQRX_BITOFFSET_POS) /*!< ADC group regular sequencer rank 8 */ +#define LL_ADC_REG_RANK_9 (ADC_SQR4_REGOFFSET | ADC_REG_RANK_9_SQRX_BITOFFSET_POS) /*!< ADC group regular sequencer rank 9 */ +#define LL_ADC_REG_RANK_10 (ADC_SQR4_REGOFFSET | ADC_REG_RANK_10_SQRX_BITOFFSET_POS) /*!< ADC group regular sequencer rank 10 */ +#define LL_ADC_REG_RANK_11 (ADC_SQR4_REGOFFSET | ADC_REG_RANK_11_SQRX_BITOFFSET_POS) /*!< ADC group regular sequencer rank 11 */ +#define LL_ADC_REG_RANK_12 (ADC_SQR4_REGOFFSET | ADC_REG_RANK_12_SQRX_BITOFFSET_POS) /*!< ADC group regular sequencer rank 12 */ +#define LL_ADC_REG_RANK_13 (ADC_SQR3_REGOFFSET | ADC_REG_RANK_13_SQRX_BITOFFSET_POS) /*!< ADC group regular sequencer rank 13 */ +#define LL_ADC_REG_RANK_14 (ADC_SQR3_REGOFFSET | ADC_REG_RANK_14_SQRX_BITOFFSET_POS) /*!< ADC group regular sequencer rank 14 */ +#define LL_ADC_REG_RANK_15 (ADC_SQR3_REGOFFSET | ADC_REG_RANK_15_SQRX_BITOFFSET_POS) /*!< ADC group regular sequencer rank 15 */ +#define LL_ADC_REG_RANK_16 (ADC_SQR3_REGOFFSET | ADC_REG_RANK_16_SQRX_BITOFFSET_POS) /*!< ADC group regular sequencer rank 16 */ +#define LL_ADC_REG_RANK_17 (ADC_SQR3_REGOFFSET | ADC_REG_RANK_17_SQRX_BITOFFSET_POS) /*!< ADC group regular sequencer rank 17 */ +#define LL_ADC_REG_RANK_18 (ADC_SQR3_REGOFFSET | ADC_REG_RANK_18_SQRX_BITOFFSET_POS) /*!< ADC group regular sequencer rank 18 */ +#define LL_ADC_REG_RANK_19 (ADC_SQR2_REGOFFSET | ADC_REG_RANK_19_SQRX_BITOFFSET_POS) /*!< ADC group regular sequencer rank 19 */ +#define LL_ADC_REG_RANK_20 (ADC_SQR2_REGOFFSET | ADC_REG_RANK_20_SQRX_BITOFFSET_POS) /*!< ADC group regular sequencer rank 20 */ +#define LL_ADC_REG_RANK_21 (ADC_SQR2_REGOFFSET | ADC_REG_RANK_21_SQRX_BITOFFSET_POS) /*!< ADC group regular sequencer rank 21 */ +#define LL_ADC_REG_RANK_22 (ADC_SQR2_REGOFFSET | ADC_REG_RANK_22_SQRX_BITOFFSET_POS) /*!< ADC group regular sequencer rank 22 */ +#define LL_ADC_REG_RANK_23 (ADC_SQR2_REGOFFSET | ADC_REG_RANK_23_SQRX_BITOFFSET_POS) /*!< ADC group regular sequencer rank 23 */ +#define LL_ADC_REG_RANK_24 (ADC_SQR2_REGOFFSET | ADC_REG_RANK_24_SQRX_BITOFFSET_POS) /*!< ADC group regular sequencer rank 24 */ +#define LL_ADC_REG_RANK_25 (ADC_SQR1_REGOFFSET | ADC_REG_RANK_25_SQRX_BITOFFSET_POS) /*!< ADC group regular sequencer rank 25 */ +#define LL_ADC_REG_RANK_26 (ADC_SQR1_REGOFFSET | ADC_REG_RANK_26_SQRX_BITOFFSET_POS) /*!< ADC group regular sequencer rank 26 */ +#define LL_ADC_REG_RANK_27 (ADC_SQR1_REGOFFSET | ADC_REG_RANK_27_SQRX_BITOFFSET_POS) /*!< ADC group regular sequencer rank 27 */ +#if defined(ADC_SQR1_SQ28) +#define LL_ADC_REG_RANK_28 (ADC_SQR1_REGOFFSET | ADC_REG_RANK_28_SQRX_BITOFFSET_POS) /*!< ADC group regular sequencer rank 28 */ +#endif +/** + * @} + */ + +/** @defgroup ADC_LL_EC_INJ_TRIGGER_SOURCE ADC group injected - Trigger source + * @{ + */ +#define LL_ADC_INJ_TRIG_SOFTWARE ((uint32_t)0x00000000U) /*!< ADC group injected conversion trigger internal: SW start. */ +#define LL_ADC_INJ_TRIG_EXT_TIM9_CH1 (ADC_INJ_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group injected conversion trigger from external IP: TIM9 channel 1 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */ +#define LL_ADC_INJ_TRIG_EXT_TIM9_TRGO (ADC_CR2_JEXTSEL_0 | ADC_INJ_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group injected conversion trigger from external IP: TIM9 TRGO. Trigger edge set to rising edge (default setting). */ +#define LL_ADC_INJ_TRIG_EXT_TIM2_TRGO (ADC_CR2_JEXTSEL_1 | ADC_INJ_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group injected conversion trigger from external IP: TIM2 TRGO. Trigger edge set to rising edge (default setting). */ +#define LL_ADC_INJ_TRIG_EXT_TIM2_CH1 (ADC_CR2_JEXTSEL_1 | ADC_CR2_JEXTSEL_0 | ADC_INJ_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group injected conversion trigger from external IP: TIM2 channel 1 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */ +#define LL_ADC_INJ_TRIG_EXT_TIM3_CH4 (ADC_CR2_JEXTSEL_2 | ADC_INJ_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group injected conversion trigger from external IP: TIM3 channel 4 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */ +#define LL_ADC_INJ_TRIG_EXT_TIM4_TRGO (ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_0 | ADC_INJ_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group injected conversion trigger from external IP: TIM4 TRGO. Trigger edge set to rising edge (default setting). */ +#define LL_ADC_INJ_TRIG_EXT_TIM4_CH1 (ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_1 | ADC_INJ_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group injected conversion trigger from external IP: TIM4 channel 1 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */ +#define LL_ADC_INJ_TRIG_EXT_TIM4_CH2 (ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_1 | ADC_CR2_JEXTSEL_0 | ADC_INJ_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group injected conversion trigger from external IP: TIM4 channel 2 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */ +#define LL_ADC_INJ_TRIG_EXT_TIM4_CH3 (ADC_CR2_JEXTSEL_3 | ADC_INJ_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group injected conversion trigger from external IP: TIM4 channel 3 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */ +#define LL_ADC_INJ_TRIG_EXT_TIM10_CH1 (ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_0 | ADC_INJ_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group injected conversion trigger from external IP: TIM10 channel 1 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */ +#define LL_ADC_INJ_TRIG_EXT_TIM7_TRGO (ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_1 | ADC_INJ_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group injected conversion trigger from external IP: TIM7 TRGO. Trigger edge set to rising edge (default setting). */ +#define LL_ADC_INJ_TRIG_EXT_EXTI_LINE15 (ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_1 | ADC_CR2_JEXTSEL_0 | ADC_INJ_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group injected conversion trigger external interrupt line 15. Trigger edge set to rising edge (default setting). */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_INJ_TRIGGER_EDGE ADC group injected - Trigger edge + * @{ + */ +#define LL_ADC_INJ_TRIG_EXT_RISING ( ADC_CR2_JEXTEN_0) /*!< ADC group injected conversion trigger polarity set to rising edge */ +#define LL_ADC_INJ_TRIG_EXT_FALLING (ADC_CR2_JEXTEN_1 ) /*!< ADC group injected conversion trigger polarity set to falling edge */ +#define LL_ADC_INJ_TRIG_EXT_RISINGFALLING (ADC_CR2_JEXTEN_1 | ADC_CR2_JEXTEN_0) /*!< ADC group injected conversion trigger polarity set to both rising and falling edges */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_INJ_TRIG_AUTO ADC group injected - Automatic trigger mode +* @{ +*/ +#define LL_ADC_INJ_TRIG_INDEPENDENT ((uint32_t)0x00000000U)/*!< ADC group injected conversion trigger independent. Setting mandatory if ADC group injected injected trigger source is set to an external trigger. */ +#define LL_ADC_INJ_TRIG_FROM_GRP_REGULAR (ADC_CR1_JAUTO) /*!< ADC group injected conversion trigger from ADC group regular. Setting compliant only with group injected trigger source set to SW start, without any further action on ADC group injected conversion start or stop: in this case, ADC group injected is controlled only from ADC group regular. */ +/** + * @} + */ + + +/** @defgroup ADC_LL_EC_INJ_SEQ_SCAN_LENGTH ADC group injected - Sequencer scan length + * @{ + */ +#define LL_ADC_INJ_SEQ_SCAN_DISABLE ((uint32_t)0x00000000U) /*!< ADC group injected sequencer disable (equivalent to sequencer of 1 rank: ADC conversion on only 1 channel) */ +#define LL_ADC_INJ_SEQ_SCAN_ENABLE_2RANKS ( ADC_JSQR_JL_0) /*!< ADC group injected sequencer enable with 2 ranks in the sequence */ +#define LL_ADC_INJ_SEQ_SCAN_ENABLE_3RANKS (ADC_JSQR_JL_1 ) /*!< ADC group injected sequencer enable with 3 ranks in the sequence */ +#define LL_ADC_INJ_SEQ_SCAN_ENABLE_4RANKS (ADC_JSQR_JL_1 | ADC_JSQR_JL_0) /*!< ADC group injected sequencer enable with 4 ranks in the sequence */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_INJ_SEQ_DISCONT_MODE ADC group injected - Sequencer discontinuous mode + * @{ + */ +#define LL_ADC_INJ_SEQ_DISCONT_DISABLE ((uint32_t)0x00000000U)/*!< ADC group injected sequencer discontinuous mode disable */ +#define LL_ADC_INJ_SEQ_DISCONT_1RANK (ADC_CR1_JDISCEN) /*!< ADC group injected sequencer discontinuous mode enable with sequence interruption every rank */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_INJ_SEQ_RANKS ADC group injected - Sequencer ranks + * @{ + */ +#define LL_ADC_INJ_RANK_1 (ADC_JDR1_REGOFFSET | ADC_JOFR1_REGOFFSET | ADC_INJ_RANK_1_JSQR_BITOFFSET_POS) /*!< ADC group injected sequencer rank 1 */ +#define LL_ADC_INJ_RANK_2 (ADC_JDR2_REGOFFSET | ADC_JOFR2_REGOFFSET | ADC_INJ_RANK_2_JSQR_BITOFFSET_POS) /*!< ADC group injected sequencer rank 2 */ +#define LL_ADC_INJ_RANK_3 (ADC_JDR3_REGOFFSET | ADC_JOFR3_REGOFFSET | ADC_INJ_RANK_3_JSQR_BITOFFSET_POS) /*!< ADC group injected sequencer rank 3 */ +#define LL_ADC_INJ_RANK_4 (ADC_JDR4_REGOFFSET | ADC_JOFR4_REGOFFSET | ADC_INJ_RANK_4_JSQR_BITOFFSET_POS) /*!< ADC group injected sequencer rank 4 */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_CHANNEL_SAMPLINGTIME Channel - Sampling time + * @{ + */ +#define LL_ADC_SAMPLINGTIME_4CYCLES ((uint32_t)0x00000000U) /*!< Sampling time 4 ADC clock cycles */ +#define LL_ADC_SAMPLINGTIME_9CYCLES (ADC_SMPR3_SMP0_0) /*!< Sampling time 9 ADC clock cycles */ +#define LL_ADC_SAMPLINGTIME_16CYCLES (ADC_SMPR3_SMP0_1) /*!< Sampling time 16 ADC clock cycles */ +#define LL_ADC_SAMPLINGTIME_24CYCLES (ADC_SMPR3_SMP0_1 | ADC_SMPR3_SMP0_0) /*!< Sampling time 24 ADC clock cycles */ +#define LL_ADC_SAMPLINGTIME_48CYCLES (ADC_SMPR3_SMP0_2) /*!< Sampling time 48 ADC clock cycles */ +#define LL_ADC_SAMPLINGTIME_96CYCLES (ADC_SMPR3_SMP0_2 | ADC_SMPR3_SMP0_0) /*!< Sampling time 96 ADC clock cycles */ +#define LL_ADC_SAMPLINGTIME_192CYCLES (ADC_SMPR3_SMP0_2 | ADC_SMPR3_SMP0_1) /*!< Sampling time 192 ADC clock cycles */ +#define LL_ADC_SAMPLINGTIME_384CYCLES (ADC_SMPR3_SMP0_2 | ADC_SMPR3_SMP0_1 | ADC_SMPR3_SMP0_0) /*!< Sampling time 384 ADC clock cycles */ +/** + * @} + */ + +#if defined(COMP_CSR_FCH3) +/** @defgroup ADC_LL_EC_CHANNEL_ROUTING_LIST Channel - Routing channels list + * @{ + */ +#define LL_ADC_CHANNEL_3_ROUTING (COMP_CSR_FCH3) /*!< ADC channel 3 routing. Used as ADC direct channel (fast channel) if OPAMP1 is in power down mode. */ +#define LL_ADC_CHANNEL_8_ROUTING (COMP_CSR_FCH8) /*!< ADC channel 8 routing. Used as ADC direct channel (fast channel) if OPAMP2 is in power down mode. */ +#define LL_ADC_CHANNEL_13_ROUTING (COMP_CSR_RCH13) /*!< ADC channel 13 routing. Used as ADC re-routed channel if OPAMP3 is in power down mode. Otherwise, channel 13 is connected to OPAMP3 output and routed through switches COMP1_SW1 and VCOMP to ADC switch matrix. (Note: OPAMP3 is available on STM32L1 Cat.4 only). */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_CHANNEL_ROUTING_SELECTION Channel - Routing selection + * @{ + */ +#define LL_ADC_CHANNEL_ROUTING_DEFAULT ((uint32_t)0x00000000U) /*!< ADC channel routing default: slow channel */ +#define LL_ADC_CHANNEL_ROUTING_DIRECT ((uint32_t)0x00000001U) /*!< ADC channel routing direct: fast channel. */ +/** + * @} + */ +#endif + +/** @defgroup ADC_LL_EC_AWD_NUMBER Analog watchdog - Analog watchdog number + * @{ + */ +#define LL_ADC_AWD1 (ADC_AWD_CR1_CHANNEL_MASK | ADC_AWD_CR1_REGOFFSET) /*!< ADC analog watchdog number 1 */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_AWD_CHANNELS Analog watchdog - Monitored channels + * @{ + */ +#define LL_ADC_AWD_DISABLE ((uint32_t)0x00000000U) /*!< ADC analog watchdog monitoring disabled */ +#define LL_ADC_AWD_ALL_CHANNELS_REG ( ADC_CR1_AWDEN ) /*!< ADC analog watchdog monitoring of all channels, converted by group regular only */ +#define LL_ADC_AWD_ALL_CHANNELS_INJ ( ADC_CR1_JAWDEN ) /*!< ADC analog watchdog monitoring of all channels, converted by group injected only */ +#define LL_ADC_AWD_ALL_CHANNELS_REG_INJ ( ADC_CR1_JAWDEN | ADC_CR1_AWDEN ) /*!< ADC analog watchdog monitoring of all channels, converted by either group regular or injected */ +#define LL_ADC_AWD_CHANNEL_0_REG ((LL_ADC_CHANNEL_0 & ADC_CHANNEL_ID_MASK) | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN0, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_0_INJ ((LL_ADC_CHANNEL_0 & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN0, converted by group injected only */ +#define LL_ADC_AWD_CHANNEL_0_REG_INJ ((LL_ADC_CHANNEL_0 & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN0, converted by either group regular or injected */ +#define LL_ADC_AWD_CHANNEL_1_REG ((LL_ADC_CHANNEL_1 & ADC_CHANNEL_ID_MASK) | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN1, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_1_INJ ((LL_ADC_CHANNEL_1 & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN1, converted by group injected only */ +#define LL_ADC_AWD_CHANNEL_1_REG_INJ ((LL_ADC_CHANNEL_1 & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN1, converted by either group regular or injected */ +#define LL_ADC_AWD_CHANNEL_2_REG ((LL_ADC_CHANNEL_2 & ADC_CHANNEL_ID_MASK) | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN2, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_2_INJ ((LL_ADC_CHANNEL_2 & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN2, converted by group injected only */ +#define LL_ADC_AWD_CHANNEL_2_REG_INJ ((LL_ADC_CHANNEL_2 & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN2, converted by either group regular or injected */ +#define LL_ADC_AWD_CHANNEL_3_REG ((LL_ADC_CHANNEL_3 & ADC_CHANNEL_ID_MASK) | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN3, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_3_INJ ((LL_ADC_CHANNEL_3 & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN3, converted by group injected only */ +#define LL_ADC_AWD_CHANNEL_3_REG_INJ ((LL_ADC_CHANNEL_3 & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN3, converted by either group regular or injected */ +#define LL_ADC_AWD_CHANNEL_4_REG ((LL_ADC_CHANNEL_4 & ADC_CHANNEL_ID_MASK) | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN4, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_4_INJ ((LL_ADC_CHANNEL_4 & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN4, converted by group injected only */ +#define LL_ADC_AWD_CHANNEL_4_REG_INJ ((LL_ADC_CHANNEL_4 & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN4, converted by either group regular or injected */ +#define LL_ADC_AWD_CHANNEL_5_REG ((LL_ADC_CHANNEL_5 & ADC_CHANNEL_ID_MASK) | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN5, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_5_INJ ((LL_ADC_CHANNEL_5 & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN5, converted by group injected only */ +#define LL_ADC_AWD_CHANNEL_5_REG_INJ ((LL_ADC_CHANNEL_5 & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN5, converted by either group regular or injected */ +#define LL_ADC_AWD_CHANNEL_6_REG ((LL_ADC_CHANNEL_6 & ADC_CHANNEL_ID_MASK) | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN6, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_6_INJ ((LL_ADC_CHANNEL_6 & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN6, converted by group injected only */ +#define LL_ADC_AWD_CHANNEL_6_REG_INJ ((LL_ADC_CHANNEL_6 & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN6, converted by either group regular or injected */ +#define LL_ADC_AWD_CHANNEL_7_REG ((LL_ADC_CHANNEL_7 & ADC_CHANNEL_ID_MASK) | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN7, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_7_INJ ((LL_ADC_CHANNEL_7 & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN7, converted by group injected only */ +#define LL_ADC_AWD_CHANNEL_7_REG_INJ ((LL_ADC_CHANNEL_7 & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN7, converted by either group regular or injected */ +#define LL_ADC_AWD_CHANNEL_8_REG ((LL_ADC_CHANNEL_8 & ADC_CHANNEL_ID_MASK) | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN8, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_8_INJ ((LL_ADC_CHANNEL_8 & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN8, converted by group injected only */ +#define LL_ADC_AWD_CHANNEL_8_REG_INJ ((LL_ADC_CHANNEL_8 & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN8, converted by either group regular or injected */ +#define LL_ADC_AWD_CHANNEL_9_REG ((LL_ADC_CHANNEL_9 & ADC_CHANNEL_ID_MASK) | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN9, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_9_INJ ((LL_ADC_CHANNEL_9 & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN9, converted by group injected only */ +#define LL_ADC_AWD_CHANNEL_9_REG_INJ ((LL_ADC_CHANNEL_9 & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN9, converted by either group regular or injected */ +#define LL_ADC_AWD_CHANNEL_10_REG ((LL_ADC_CHANNEL_10 & ADC_CHANNEL_ID_MASK) | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN10, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_10_INJ ((LL_ADC_CHANNEL_10 & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN10, converted by group injected only */ +#define LL_ADC_AWD_CHANNEL_10_REG_INJ ((LL_ADC_CHANNEL_10 & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN10, converted by either group regular or injected */ +#define LL_ADC_AWD_CHANNEL_11_REG ((LL_ADC_CHANNEL_11 & ADC_CHANNEL_ID_MASK) | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN11, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_11_INJ ((LL_ADC_CHANNEL_11 & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN11, converted by group injected only */ +#define LL_ADC_AWD_CHANNEL_11_REG_INJ ((LL_ADC_CHANNEL_11 & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN11, converted by either group regular or injected */ +#define LL_ADC_AWD_CHANNEL_12_REG ((LL_ADC_CHANNEL_12 & ADC_CHANNEL_ID_MASK) | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN12, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_12_INJ ((LL_ADC_CHANNEL_12 & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN12, converted by group injected only */ +#define LL_ADC_AWD_CHANNEL_12_REG_INJ ((LL_ADC_CHANNEL_12 & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN12, converted by either group regular or injected */ +#define LL_ADC_AWD_CHANNEL_13_REG ((LL_ADC_CHANNEL_13 & ADC_CHANNEL_ID_MASK) | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN13, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_13_INJ ((LL_ADC_CHANNEL_13 & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN13, converted by group injected only */ +#define LL_ADC_AWD_CHANNEL_13_REG_INJ ((LL_ADC_CHANNEL_13 & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN13, converted by either group regular or injected */ +#define LL_ADC_AWD_CHANNEL_14_REG ((LL_ADC_CHANNEL_14 & ADC_CHANNEL_ID_MASK) | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN14, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_14_INJ ((LL_ADC_CHANNEL_14 & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN14, converted by group injected only */ +#define LL_ADC_AWD_CHANNEL_14_REG_INJ ((LL_ADC_CHANNEL_14 & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN14, converted by either group regular or injected */ +#define LL_ADC_AWD_CHANNEL_15_REG ((LL_ADC_CHANNEL_15 & ADC_CHANNEL_ID_MASK) | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN15, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_15_INJ ((LL_ADC_CHANNEL_15 & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN15, converted by group injected only */ +#define LL_ADC_AWD_CHANNEL_15_REG_INJ ((LL_ADC_CHANNEL_15 & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN15, converted by either group regular or injected */ +#define LL_ADC_AWD_CHANNEL_16_REG ((LL_ADC_CHANNEL_16 & ADC_CHANNEL_ID_MASK) | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN16, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_16_INJ ((LL_ADC_CHANNEL_16 & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN16, converted by group injected only */ +#define LL_ADC_AWD_CHANNEL_16_REG_INJ ((LL_ADC_CHANNEL_16 & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN16, converted by either group regular or injected */ +#define LL_ADC_AWD_CHANNEL_17_REG ((LL_ADC_CHANNEL_17 & ADC_CHANNEL_ID_MASK) | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN17, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_17_INJ ((LL_ADC_CHANNEL_17 & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN17, converted by group injected only */ +#define LL_ADC_AWD_CHANNEL_17_REG_INJ ((LL_ADC_CHANNEL_17 & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN17, converted by either group regular or injected */ +#define LL_ADC_AWD_CHANNEL_18_REG ((LL_ADC_CHANNEL_18 & ADC_CHANNEL_ID_MASK) | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN18, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_18_INJ ((LL_ADC_CHANNEL_18 & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN18, converted by group injected only */ +#define LL_ADC_AWD_CHANNEL_18_REG_INJ ((LL_ADC_CHANNEL_18 & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN18, converted by either group regular or injected */ +#define LL_ADC_AWD_CHANNEL_19_REG ((LL_ADC_CHANNEL_19 & ADC_CHANNEL_ID_MASK) | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN19, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_19_INJ ((LL_ADC_CHANNEL_19 & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN19, converted by group injected only */ +#define LL_ADC_AWD_CHANNEL_19_REG_INJ ((LL_ADC_CHANNEL_19 & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN19, converted by either group regular or injected */ +#define LL_ADC_AWD_CHANNEL_20_REG ((LL_ADC_CHANNEL_20 & ADC_CHANNEL_ID_MASK) | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN20, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_20_INJ ((LL_ADC_CHANNEL_20 & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN20, converted by group injected only */ +#define LL_ADC_AWD_CHANNEL_20_REG_INJ ((LL_ADC_CHANNEL_20 & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN20, converted by either group regular or injected */ +#define LL_ADC_AWD_CHANNEL_21_REG ((LL_ADC_CHANNEL_21 & ADC_CHANNEL_ID_MASK) | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN21, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_21_INJ ((LL_ADC_CHANNEL_21 & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN21, converted by group injected only */ +#define LL_ADC_AWD_CHANNEL_21_REG_INJ ((LL_ADC_CHANNEL_21 & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN21, converted by either group regular or injected */ +#define LL_ADC_AWD_CHANNEL_22_REG ((LL_ADC_CHANNEL_22 & ADC_CHANNEL_ID_MASK) | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN22, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_22_INJ ((LL_ADC_CHANNEL_22 & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN22, converted by group injected only */ +#define LL_ADC_AWD_CHANNEL_22_REG_INJ ((LL_ADC_CHANNEL_22 & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN22, converted by either group regular or injected */ +#define LL_ADC_AWD_CHANNEL_23_REG ((LL_ADC_CHANNEL_23 & ADC_CHANNEL_ID_MASK) | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN23, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_23_INJ ((LL_ADC_CHANNEL_23 & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN23, converted by group injected only */ +#define LL_ADC_AWD_CHANNEL_23_REG_INJ ((LL_ADC_CHANNEL_23 & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN23, converted by either group regular or injected */ +#define LL_ADC_AWD_CHANNEL_24_REG ((LL_ADC_CHANNEL_24 & ADC_CHANNEL_ID_MASK) | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN24, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_24_INJ ((LL_ADC_CHANNEL_24 & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN24, converted by group injected only */ +#define LL_ADC_AWD_CHANNEL_24_REG_INJ ((LL_ADC_CHANNEL_24 & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN24, converted by either group regular or injected */ +#define LL_ADC_AWD_CHANNEL_25_REG ((LL_ADC_CHANNEL_25 & ADC_CHANNEL_ID_MASK) | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN25, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_25_INJ ((LL_ADC_CHANNEL_25 & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN25, converted by group injected only */ +#define LL_ADC_AWD_CHANNEL_25_REG_INJ ((LL_ADC_CHANNEL_25 & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN25, converted by either group regular or injected */ +#define LL_ADC_AWD_CHANNEL_26_REG ((LL_ADC_CHANNEL_26 & ADC_CHANNEL_ID_MASK) | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN26, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_26_INJ ((LL_ADC_CHANNEL_26 & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN26, converted by group injected only */ +#define LL_ADC_AWD_CHANNEL_26_REG_INJ ((LL_ADC_CHANNEL_26 & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN26, converted by either group regular or injected */ +#if defined(ADC_SMPR0_SMP31) +#define LL_ADC_AWD_CHANNEL_27_REG ((LL_ADC_CHANNEL_27 & ADC_CHANNEL_ID_MASK) | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN27, converted by group regular only. On STM32L1, parameter not available on all devices: only on STM32L1 Cat.4 and Cat.5. */ +#define LL_ADC_AWD_CHANNEL_27_INJ ((LL_ADC_CHANNEL_27 & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN27, converted by group injected only. On STM32L1, parameter not available on all devices: only on STM32L1 Cat.4 and Cat.5. */ +#define LL_ADC_AWD_CHANNEL_27_REG_INJ ((LL_ADC_CHANNEL_27 & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN27, converted by either group regular or injected. On STM32L1, parameter not available on all devices: only on STM32L1 Cat.4 and Cat.5. */ +#define LL_ADC_AWD_CHANNEL_28_REG ((LL_ADC_CHANNEL_28 & ADC_CHANNEL_ID_MASK) | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN28, converted by group regular only. On STM32L1, parameter not available on all devices: only on STM32L1 Cat.4 and Cat.5. */ +#define LL_ADC_AWD_CHANNEL_28_INJ ((LL_ADC_CHANNEL_28 & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN28, converted by group injected only. On STM32L1, parameter not available on all devices: only on STM32L1 Cat.4 and Cat.5. */ +#define LL_ADC_AWD_CHANNEL_28_REG_INJ ((LL_ADC_CHANNEL_28 & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN28, converted by either group regular or injected. On STM32L1, parameter not available on all devices: only on STM32L1 Cat.4 and Cat.5. */ +#define LL_ADC_AWD_CHANNEL_29_REG ((LL_ADC_CHANNEL_29 & ADC_CHANNEL_ID_MASK) | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN29, converted by group regular only. On STM32L1, parameter not available on all devices: only on STM32L1 Cat.4 and Cat.5. */ +#define LL_ADC_AWD_CHANNEL_29_INJ ((LL_ADC_CHANNEL_29 & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN29, converted by group injected only. On STM32L1, parameter not available on all devices: only on STM32L1 Cat.4 and Cat.5. */ +#define LL_ADC_AWD_CHANNEL_29_REG_INJ ((LL_ADC_CHANNEL_29 & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN29, converted by either group regular or injected. On STM32L1, parameter not available on all devices: only on STM32L1 Cat.4 and Cat.5. */ +#define LL_ADC_AWD_CHANNEL_30_REG ((LL_ADC_CHANNEL_30 & ADC_CHANNEL_ID_MASK) | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN30, converted by group regular only. On STM32L1, parameter not available on all devices: only on STM32L1 Cat.4 and Cat.5. */ +#define LL_ADC_AWD_CHANNEL_30_INJ ((LL_ADC_CHANNEL_30 & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN30, converted by group injected only. On STM32L1, parameter not available on all devices: only on STM32L1 Cat.4 and Cat.5. */ +#define LL_ADC_AWD_CHANNEL_30_REG_INJ ((LL_ADC_CHANNEL_30 & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN30, converted by either group regular or injected. On STM32L1, parameter not available on all devices: only on STM32L1 Cat.4 and Cat.5. */ +#define LL_ADC_AWD_CHANNEL_31_REG ((LL_ADC_CHANNEL_31 & ADC_CHANNEL_ID_MASK) | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN31, converted by group regular only. On STM32L1, parameter not available on all devices: only on STM32L1 Cat.4 and Cat.5. */ +#define LL_ADC_AWD_CHANNEL_31_INJ ((LL_ADC_CHANNEL_31 & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN31, converted by group injected only. On STM32L1, parameter not available on all devices: only on STM32L1 Cat.4 and Cat.5. */ +#define LL_ADC_AWD_CHANNEL_31_REG_INJ ((LL_ADC_CHANNEL_31 & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN31, converted by either group regular or injected. On STM32L1, parameter not available on all devices: only on STM32L1 Cat.4 and Cat.5. */ +#endif /* ADC_SMPR0_SMP31 */ +#define LL_ADC_AWD_CH_VREFINT_REG ((LL_ADC_CHANNEL_VREFINT & ADC_CHANNEL_ID_MASK) | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC internal channel connected to VrefInt: Internal voltage reference, converted by group regular only. Channel common to both bank A and bank B. */ +#define LL_ADC_AWD_CH_VREFINT_INJ ((LL_ADC_CHANNEL_VREFINT & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC internal channel connected to VrefInt: Internal voltage reference, converted by group injected only. Channel common to both bank A and bank B. */ +#define LL_ADC_AWD_CH_VREFINT_REG_INJ ((LL_ADC_CHANNEL_VREFINT & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC internal channel connected to VrefInt: Internal voltage reference, converted by either group regular or injected. Channel common to both bank A and bank B. */ +#define LL_ADC_AWD_CH_TEMPSENSOR_REG ((LL_ADC_CHANNEL_TEMPSENSOR & ADC_CHANNEL_ID_MASK) | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC internal channel connected to Temperature sensor, converted by group regular only. Channel common to both bank A and bank B. */ +#define LL_ADC_AWD_CH_TEMPSENSOR_INJ ((LL_ADC_CHANNEL_TEMPSENSOR & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC internal channel connected to Temperature sensor, converted by group injected only. Channel common to both bank A and bank B. */ +#define LL_ADC_AWD_CH_TEMPSENSOR_REG_INJ ((LL_ADC_CHANNEL_TEMPSENSOR & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC internal channel connected to Temperature sensor, converted by either group regular or injected. Channel common to both bank A and bank B. */ +#define LL_ADC_AWD_CH_VCOMP_REG ((LL_ADC_CHANNEL_VCOMP & ADC_CHANNEL_ID_MASK) | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC internal channel connected to comparator COMP1 positive input via ADC switch matrix. Channel common to both bank A and bank B. */ +#define LL_ADC_AWD_CH_VCOMP_INJ ((LL_ADC_CHANNEL_VCOMP & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC internal channel connected to comparator COMP1 positive input via ADC switch matrix. Channel common to both bank A and bank B. */ +#define LL_ADC_AWD_CH_VCOMP_REG_INJ ((LL_ADC_CHANNEL_VCOMP & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC internal channel connected to comparator COMP1 positive input via ADC switch matrix. Channel common to both bank A and bank B. */ +#if defined(OPAMP_CSR_OPA1PD) || defined (OPAMP_CSR_OPA2PD) || defined (OPAMP_CSR_OPA3PD) +#define LL_ADC_AWD_CH_VOPAMP1_REG ((LL_ADC_CHANNEL_VOPAMP1 & ADC_CHANNEL_ID_MASK) | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC internal channel connected to OPAMP1 output via ADC switch matrix. Channel common to both bank A and bank B. */ +#define LL_ADC_AWD_CH_VOPAMP1_INJ ((LL_ADC_CHANNEL_VOPAMP1 & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC internal channel connected to OPAMP1 output via ADC switch matrix. Channel common to both bank A and bank B. */ +#define LL_ADC_AWD_CH_VOPAMP1_REG_INJ ((LL_ADC_CHANNEL_VOPAMP1 & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC internal channel connected to OPAMP1 output via ADC switch matrix. Channel common to both bank A and bank B. */ +#define LL_ADC_AWD_CH_VOPAMP2_REG ((LL_ADC_CHANNEL_VOPAMP2 & ADC_CHANNEL_ID_MASK) | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC internal channel connected to OPAMP2 output via ADC switch matrix. Channel common to both bank A and bank B. */ +#define LL_ADC_AWD_CH_VOPAMP2_INJ ((LL_ADC_CHANNEL_VOPAMP2 & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC internal channel connected to OPAMP2 output via ADC switch matrix. Channel common to both bank A and bank B. */ +#define LL_ADC_AWD_CH_VOPAMP2_REG_INJ ((LL_ADC_CHANNEL_VOPAMP2 & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC internal channel connected to OPAMP2 output via ADC switch matrix. Channel common to both bank A and bank B. */ +#if defined(OPAMP_CSR_OPA3PD) +#define LL_ADC_AWD_CH_VOPAMP3_REG ((LL_ADC_CHANNEL_VOPAMP3 & ADC_CHANNEL_ID_MASK) | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC internal channel connected to OPAMP3 output via ADC switch matrix. Channel common to both bank A and bank B. */ +#define LL_ADC_AWD_CH_VOPAMP3_INJ ((LL_ADC_CHANNEL_VOPAMP3 & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC internal channel connected to OPAMP3 output via ADC switch matrix. Channel common to both bank A and bank B. */ +#define LL_ADC_AWD_CH_VOPAMP3_REG_INJ ((LL_ADC_CHANNEL_VOPAMP3 & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC internal channel connected to OPAMP3 output via ADC switch matrix. Channel common to both bank A and bank B. */ +#endif /* OPAMP_CSR_OPA3PD */ +#endif /* OPAMP_CSR_OPA1PD || OPAMP_CSR_OPA2PD || OPAMP_CSR_OPA3PD */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_AWD_THRESHOLDS Analog watchdog - Thresholds + * @{ + */ +#define LL_ADC_AWD_THRESHOLD_HIGH (ADC_AWD_TR1_HIGH_REGOFFSET) /*!< ADC analog watchdog threshold high */ +#define LL_ADC_AWD_THRESHOLD_LOW (ADC_AWD_TR1_LOW_REGOFFSET) /*!< ADC analog watchdog threshold low */ +/** + * @} + */ + + +/** @defgroup ADC_LL_EC_HW_DELAYS Definitions of ADC hardware constraints delays + * @note Only ADC IP HW delays are defined in ADC LL driver driver, + * not timeout values. + * For details on delays values, refer to descriptions in source code + * above each literal definition. + * @{ + */ + +/* Note: Only ADC IP HW delays are defined in ADC LL driver driver, */ +/* not timeout values. */ +/* Timeout values for ADC operations are dependent to device clock */ +/* configuration (system clock versus ADC clock), */ +/* and therefore must be defined in user application. */ +/* Indications for estimation of ADC timeout delays, for this */ +/* STM32 serie: */ +/* - ADC enable time: maximum delay is 3.5us */ +/* (refer to device datasheet, parameter "tSTAB") */ +/* - ADC conversion time: duration depending on ADC clock and ADC */ +/* configuration. */ +/* (refer to device reference manual, section "Timing") */ + +/* Delay for internal voltage reference stabilization time. */ +/* Delay set to maximum value (refer to device datasheet, */ +/* parameter "TADC_BUF"). */ +/* Unit: us */ +#define LL_ADC_DELAY_VREFINT_STAB_US ((uint32_t) 10U) /*!< Delay for internal voltage reference stabilization time */ + +/* Delay for temperature sensor stabilization time. */ +/* Literal set to maximum value (refer to device datasheet, */ +/* parameter "tSTART"). */ +/* Unit: us */ +#define LL_ADC_DELAY_TEMPSENSOR_STAB_US ((uint32_t) 10U) /*!< Delay for internal voltage reference stabilization time */ + +/** + * @} + */ + +/** + * @} + */ + + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup ADC_LL_Exported_Macros ADC Exported Macros + * @{ + */ + +/** @defgroup ADC_LL_EM_WRITE_READ Common write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in ADC register + * @param __INSTANCE__ ADC Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_ADC_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in ADC register + * @param __INSTANCE__ ADC Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_ADC_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** @defgroup ADC_LL_EM_HELPER_MACRO ADC helper macro + * @{ + */ + +/** + * @brief Helper macro to get ADC channel number in decimal format + * from literals LL_ADC_CHANNEL_x. + * @note Example: + * __LL_ADC_CHANNEL_TO_DECIMAL_NB(LL_ADC_CHANNEL_4) + * will return decimal number "4". + * @note The input can be a value from functions where a channel + * number is returned, either defined with number + * or with bitfield (only one bit must be set). + * @param __CHANNEL__ This parameter can be one of the following values: + * @arg @ref LL_ADC_CHANNEL_0 (2) + * @arg @ref LL_ADC_CHANNEL_1 (2) + * @arg @ref LL_ADC_CHANNEL_2 (2) + * @arg @ref LL_ADC_CHANNEL_3 (2) + * @arg @ref LL_ADC_CHANNEL_4 (1) + * @arg @ref LL_ADC_CHANNEL_5 (1) + * @arg @ref LL_ADC_CHANNEL_6 (2) + * @arg @ref LL_ADC_CHANNEL_7 (2) + * @arg @ref LL_ADC_CHANNEL_8 (2) + * @arg @ref LL_ADC_CHANNEL_9 (2) + * @arg @ref LL_ADC_CHANNEL_10 (2) + * @arg @ref LL_ADC_CHANNEL_11 (2) + * @arg @ref LL_ADC_CHANNEL_12 (2) + * @arg @ref LL_ADC_CHANNEL_13 (3) + * @arg @ref LL_ADC_CHANNEL_14 (3) + * @arg @ref LL_ADC_CHANNEL_15 (3) + * @arg @ref LL_ADC_CHANNEL_16 (3) + * @arg @ref LL_ADC_CHANNEL_17 (3) + * @arg @ref LL_ADC_CHANNEL_18 (3) + * @arg @ref LL_ADC_CHANNEL_19 (3) + * @arg @ref LL_ADC_CHANNEL_20 (3) + * @arg @ref LL_ADC_CHANNEL_21 (3) + * @arg @ref LL_ADC_CHANNEL_22 (1) + * @arg @ref LL_ADC_CHANNEL_23 (1) + * @arg @ref LL_ADC_CHANNEL_24 (1) + * @arg @ref LL_ADC_CHANNEL_25 (1) + * @arg @ref LL_ADC_CHANNEL_26 (3) + * @arg @ref LL_ADC_CHANNEL_27 (3)(4) + * @arg @ref LL_ADC_CHANNEL_28 (3)(4) + * @arg @ref LL_ADC_CHANNEL_29 (3)(4) + * @arg @ref LL_ADC_CHANNEL_30 (3)(4) + * @arg @ref LL_ADC_CHANNEL_31 (3)(4) + * @arg @ref LL_ADC_CHANNEL_VREFINT (3) + * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR (3) + * @arg @ref LL_ADC_CHANNEL_VCOMP (3) + * @arg @ref LL_ADC_CHANNEL_VOPAMP1 (3)(5) + * @arg @ref LL_ADC_CHANNEL_VOPAMP2 (3)(5) + * @arg @ref LL_ADC_CHANNEL_VOPAMP3 (3)(5) + * + * (1) On STM32L1, connection via routing interface (RI) specificity: fast channel (channel routed directly to ADC switch matrix).\n + * (2) On STM32L1, for devices with feature 'channels banks' available: Channel different in bank A and bank B.\n + * (3) On STM32L1, for devices with feature 'channels banks' available: Channel common to both bank A and bank B.\n + * (4) On STM32L1, parameter not available on all devices: only on STM32L1 Cat.4 and Cat.5.\n + * (5) On STM32L1, parameter not available on all devices: OPAMP1 and OPAMP2 available only on STM32L1 Cat.3, Cat.4 and Cat.5, OPAMP3 available only on STM32L1 Cat.4 and Cat.5 + * @retval Value between Min_Data=0 and Max_Data=18 + */ +#define __LL_ADC_CHANNEL_TO_DECIMAL_NB(__CHANNEL__) \ + (((__CHANNEL__) & ADC_CHANNEL_ID_NUMBER_MASK) >> ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS) + +/** + * @brief Helper macro to get ADC channel in literal format LL_ADC_CHANNEL_x + * from number in decimal format. + * @note Example: + * __LL_ADC_DECIMAL_NB_TO_CHANNEL(4) + * will return a data equivalent to "LL_ADC_CHANNEL_4". + * @param __DECIMAL_NB__: Value between Min_Data=0 and Max_Data=18 + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_CHANNEL_0 (2) + * @arg @ref LL_ADC_CHANNEL_1 (2) + * @arg @ref LL_ADC_CHANNEL_2 (2) + * @arg @ref LL_ADC_CHANNEL_3 (2) + * @arg @ref LL_ADC_CHANNEL_4 (1) + * @arg @ref LL_ADC_CHANNEL_5 (1) + * @arg @ref LL_ADC_CHANNEL_6 (2) + * @arg @ref LL_ADC_CHANNEL_7 (2) + * @arg @ref LL_ADC_CHANNEL_8 (2) + * @arg @ref LL_ADC_CHANNEL_9 (2) + * @arg @ref LL_ADC_CHANNEL_10 (2) + * @arg @ref LL_ADC_CHANNEL_11 (2) + * @arg @ref LL_ADC_CHANNEL_12 (2) + * @arg @ref LL_ADC_CHANNEL_13 (3) + * @arg @ref LL_ADC_CHANNEL_14 (3) + * @arg @ref LL_ADC_CHANNEL_15 (3) + * @arg @ref LL_ADC_CHANNEL_16 (3) + * @arg @ref LL_ADC_CHANNEL_17 (3) + * @arg @ref LL_ADC_CHANNEL_18 (3) + * @arg @ref LL_ADC_CHANNEL_19 (3) + * @arg @ref LL_ADC_CHANNEL_20 (3) + * @arg @ref LL_ADC_CHANNEL_21 (3) + * @arg @ref LL_ADC_CHANNEL_22 (1) + * @arg @ref LL_ADC_CHANNEL_23 (1) + * @arg @ref LL_ADC_CHANNEL_24 (1) + * @arg @ref LL_ADC_CHANNEL_25 (1) + * @arg @ref LL_ADC_CHANNEL_26 (3) + * @arg @ref LL_ADC_CHANNEL_27 (3)(4) + * @arg @ref LL_ADC_CHANNEL_28 (3)(4) + * @arg @ref LL_ADC_CHANNEL_29 (3)(4) + * @arg @ref LL_ADC_CHANNEL_30 (3)(4) + * @arg @ref LL_ADC_CHANNEL_31 (3)(4) + * @arg @ref LL_ADC_CHANNEL_VREFINT (3)(6) + * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR (3)(6) + * @arg @ref LL_ADC_CHANNEL_VCOMP (3)(6) + * @arg @ref LL_ADC_CHANNEL_VOPAMP1 (3)(5) + * @arg @ref LL_ADC_CHANNEL_VOPAMP2 (3)(5) + * @arg @ref LL_ADC_CHANNEL_VOPAMP3 (3)(5) + * + * (1) On STM32L1, connection via routing interface (RI) specificity: fast channel (channel routed directly to ADC switch matrix).\n + * (2) On STM32L1, for devices with feature 'channels banks' available: Channel different in bank A and bank B.\n + * (3) On STM32L1, for devices with feature 'channels banks' available: Channel common to both bank A and bank B.\n + * (4) On STM32L1, parameter not available on all devices: only on STM32L1 Cat.4 and Cat.5.\n + * (5) On STM32L1, parameter not available on all devices: OPAMP1 and OPAMP2 available only on STM32L1 Cat.3, Cat.4 and Cat.5, OPAMP3 available only on STM32L1 Cat.4 and Cat.5.\n + * (6) For ADC channel read back from ADC register, + * comparison with internal channel parameter to be done + * using helper macro @ref __LL_ADC_CHANNEL_INTERNAL_TO_EXTERNAL(). + */ +#if defined(ADC_SMPR0_SMP31) +#define __LL_ADC_DECIMAL_NB_TO_CHANNEL(__DECIMAL_NB__) \ + (((__DECIMAL_NB__) <= 9U) \ + ? ( \ + ((__DECIMAL_NB__) << ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS) | \ + (ADC_SMPR3_REGOFFSET | (((uint32_t) (3U * (__DECIMAL_NB__))) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) \ + ) \ + : \ + (((__DECIMAL_NB__) <= 19U) \ + ? ( \ + ((__DECIMAL_NB__) << ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS) | \ + (ADC_SMPR2_REGOFFSET | (((uint32_t) (3U * ((__DECIMAL_NB__) -10U))) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) \ + ) \ + : \ + (((__DECIMAL_NB__) <= 28U) \ + ? ( \ + ((__DECIMAL_NB__) << ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS) | \ + (ADC_SMPR1_REGOFFSET | (((uint32_t) (3U * ((__DECIMAL_NB__) -20U))) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) \ + ) \ + : \ + ( \ + ((__DECIMAL_NB__) << ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS) | \ + (ADC_SMPR0_REGOFFSET | (((uint32_t) (3U * ((__DECIMAL_NB__) - 30U))) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) \ + ) \ + ) \ + ) \ + ) +#else +#define __LL_ADC_DECIMAL_NB_TO_CHANNEL(__DECIMAL_NB__) \ + (((__DECIMAL_NB__) <= 9U) \ + ? ( \ + ((__DECIMAL_NB__) << ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS) | \ + (ADC_SMPR3_REGOFFSET | (((uint32_t) (3U * (__DECIMAL_NB__))) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) \ + ) \ + : \ + (((__DECIMAL_NB__) <= 19U) \ + ? ( \ + ((__DECIMAL_NB__) << ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS) | \ + (ADC_SMPR2_REGOFFSET | (((uint32_t) (3U * ((__DECIMAL_NB__) -10U))) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) \ + ) \ + : \ + ( \ + ((__DECIMAL_NB__) << ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS) | \ + (ADC_SMPR1_REGOFFSET | (((uint32_t) (3U * ((__DECIMAL_NB__) -20U))) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) \ + ) \ + ) \ + ) +#endif /* ADC_SMPR0_SMP31 */ + +/** + * @brief Helper macro to determine whether the selected channel + * corresponds to literal definitions of driver. + * @note The different literal definitions of ADC channels are: + * - ADC internal channel: + * LL_ADC_CHANNEL_VREFINT, LL_ADC_CHANNEL_TEMPSENSOR, ... + * - ADC external channel (channel connected to a GPIO pin): + * LL_ADC_CHANNEL_1, LL_ADC_CHANNEL_2, ... + * @note The channel parameter must be a value defined from literal + * definition of a ADC internal channel (LL_ADC_CHANNEL_VREFINT, + * LL_ADC_CHANNEL_TEMPSENSOR, ...), + * ADC external channel (LL_ADC_CHANNEL_1, LL_ADC_CHANNEL_2, ...), + * must not be a value from functions where a channel number is + * returned from ADC registers, + * because internal and external channels share the same channel + * number in ADC registers. The differentiation is made only with + * parameters definitions of driver. + * @param __CHANNEL__ This parameter can be one of the following values: + * @arg @ref LL_ADC_CHANNEL_0 (2) + * @arg @ref LL_ADC_CHANNEL_1 (2) + * @arg @ref LL_ADC_CHANNEL_2 (2) + * @arg @ref LL_ADC_CHANNEL_3 (2) + * @arg @ref LL_ADC_CHANNEL_4 (1) + * @arg @ref LL_ADC_CHANNEL_5 (1) + * @arg @ref LL_ADC_CHANNEL_6 (2) + * @arg @ref LL_ADC_CHANNEL_7 (2) + * @arg @ref LL_ADC_CHANNEL_8 (2) + * @arg @ref LL_ADC_CHANNEL_9 (2) + * @arg @ref LL_ADC_CHANNEL_10 (2) + * @arg @ref LL_ADC_CHANNEL_11 (2) + * @arg @ref LL_ADC_CHANNEL_12 (2) + * @arg @ref LL_ADC_CHANNEL_13 (3) + * @arg @ref LL_ADC_CHANNEL_14 (3) + * @arg @ref LL_ADC_CHANNEL_15 (3) + * @arg @ref LL_ADC_CHANNEL_16 (3) + * @arg @ref LL_ADC_CHANNEL_17 (3) + * @arg @ref LL_ADC_CHANNEL_18 (3) + * @arg @ref LL_ADC_CHANNEL_19 (3) + * @arg @ref LL_ADC_CHANNEL_20 (3) + * @arg @ref LL_ADC_CHANNEL_21 (3) + * @arg @ref LL_ADC_CHANNEL_22 (1) + * @arg @ref LL_ADC_CHANNEL_23 (1) + * @arg @ref LL_ADC_CHANNEL_24 (1) + * @arg @ref LL_ADC_CHANNEL_25 (1) + * @arg @ref LL_ADC_CHANNEL_26 (3) + * @arg @ref LL_ADC_CHANNEL_27 (3)(4) + * @arg @ref LL_ADC_CHANNEL_28 (3)(4) + * @arg @ref LL_ADC_CHANNEL_29 (3)(4) + * @arg @ref LL_ADC_CHANNEL_30 (3)(4) + * @arg @ref LL_ADC_CHANNEL_31 (3)(4) + * @arg @ref LL_ADC_CHANNEL_VREFINT (3) + * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR (3) + * @arg @ref LL_ADC_CHANNEL_VCOMP (3) + * @arg @ref LL_ADC_CHANNEL_VOPAMP1 (3)(5) + * @arg @ref LL_ADC_CHANNEL_VOPAMP2 (3)(5) + * @arg @ref LL_ADC_CHANNEL_VOPAMP3 (3)(5) + * + * (1) On STM32L1, connection via routing interface (RI) specificity: fast channel (channel routed directly to ADC switch matrix).\n + * (2) On STM32L1, for devices with feature 'channels banks' available: Channel different in bank A and bank B.\n + * (3) On STM32L1, for devices with feature 'channels banks' available: Channel common to both bank A and bank B.\n + * (4) On STM32L1, parameter not available on all devices: only on STM32L1 Cat.4 and Cat.5.\n + * (5) On STM32L1, parameter not available on all devices: OPAMP1 and OPAMP2 available only on STM32L1 Cat.3, Cat.4 and Cat.5, OPAMP3 available only on STM32L1 Cat.4 and Cat.5 + * @retval Value "0" if the channel corresponds to a parameter definition of a ADC external channel (channel connected to a GPIO pin). + * Value "1" if the channel corresponds to a parameter definition of a ADC internal channel. + */ +#define __LL_ADC_IS_CHANNEL_INTERNAL(__CHANNEL__) \ + (((__CHANNEL__) & ADC_CHANNEL_ID_INTERNAL_CH_MASK) != 0U) + +/** + * @brief Helper macro to convert a channel defined from parameter + * definition of a ADC internal channel (LL_ADC_CHANNEL_VREFINT, + * LL_ADC_CHANNEL_TEMPSENSOR, ...), + * to its equivalent parameter definition of a ADC external channel + * (LL_ADC_CHANNEL_1, LL_ADC_CHANNEL_2, ...). + * @note The channel parameter can be, additionally to a value + * defined from parameter definition of a ADC internal channel + * (LL_ADC_CHANNEL_VREFINT, LL_ADC_CHANNEL_TEMPSENSOR, ...), + * a value defined from parameter definition of + * ADC external channel (LL_ADC_CHANNEL_1, LL_ADC_CHANNEL_2, ...) + * or a value from functions where a channel number is returned + * from ADC registers. + * @param __CHANNEL__ This parameter can be one of the following values: + * @arg @ref LL_ADC_CHANNEL_0 (2) + * @arg @ref LL_ADC_CHANNEL_1 (2) + * @arg @ref LL_ADC_CHANNEL_2 (2) + * @arg @ref LL_ADC_CHANNEL_3 (2) + * @arg @ref LL_ADC_CHANNEL_4 (1) + * @arg @ref LL_ADC_CHANNEL_5 (1) + * @arg @ref LL_ADC_CHANNEL_6 (2) + * @arg @ref LL_ADC_CHANNEL_7 (2) + * @arg @ref LL_ADC_CHANNEL_8 (2) + * @arg @ref LL_ADC_CHANNEL_9 (2) + * @arg @ref LL_ADC_CHANNEL_10 (2) + * @arg @ref LL_ADC_CHANNEL_11 (2) + * @arg @ref LL_ADC_CHANNEL_12 (2) + * @arg @ref LL_ADC_CHANNEL_13 (3) + * @arg @ref LL_ADC_CHANNEL_14 (3) + * @arg @ref LL_ADC_CHANNEL_15 (3) + * @arg @ref LL_ADC_CHANNEL_16 (3) + * @arg @ref LL_ADC_CHANNEL_17 (3) + * @arg @ref LL_ADC_CHANNEL_18 (3) + * @arg @ref LL_ADC_CHANNEL_19 (3) + * @arg @ref LL_ADC_CHANNEL_20 (3) + * @arg @ref LL_ADC_CHANNEL_21 (3) + * @arg @ref LL_ADC_CHANNEL_22 (1) + * @arg @ref LL_ADC_CHANNEL_23 (1) + * @arg @ref LL_ADC_CHANNEL_24 (1) + * @arg @ref LL_ADC_CHANNEL_25 (1) + * @arg @ref LL_ADC_CHANNEL_26 (3) + * @arg @ref LL_ADC_CHANNEL_27 (3)(4) + * @arg @ref LL_ADC_CHANNEL_28 (3)(4) + * @arg @ref LL_ADC_CHANNEL_29 (3)(4) + * @arg @ref LL_ADC_CHANNEL_30 (3)(4) + * @arg @ref LL_ADC_CHANNEL_31 (3)(4) + * @arg @ref LL_ADC_CHANNEL_VREFINT (3) + * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR (3) + * @arg @ref LL_ADC_CHANNEL_VCOMP (3) + * @arg @ref LL_ADC_CHANNEL_VOPAMP1 (3)(5) + * @arg @ref LL_ADC_CHANNEL_VOPAMP2 (3)(5) + * @arg @ref LL_ADC_CHANNEL_VOPAMP3 (3)(5) + * + * (1) On STM32L1, connection via routing interface (RI) specificity: fast channel (channel routed directly to ADC switch matrix).\n + * (2) On STM32L1, for devices with feature 'channels banks' available: Channel different in bank A and bank B.\n + * (3) On STM32L1, for devices with feature 'channels banks' available: Channel common to both bank A and bank B.\n + * (4) On STM32L1, parameter not available on all devices: only on STM32L1 Cat.4 and Cat.5.\n + * (5) On STM32L1, parameter not available on all devices: OPAMP1 and OPAMP2 available only on STM32L1 Cat.3, Cat.4 and Cat.5, OPAMP3 available only on STM32L1 Cat.4 and Cat.5 + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_CHANNEL_0 + * @arg @ref LL_ADC_CHANNEL_1 + * @arg @ref LL_ADC_CHANNEL_2 + * @arg @ref LL_ADC_CHANNEL_3 + * @arg @ref LL_ADC_CHANNEL_4 + * @arg @ref LL_ADC_CHANNEL_5 + * @arg @ref LL_ADC_CHANNEL_6 + * @arg @ref LL_ADC_CHANNEL_7 + * @arg @ref LL_ADC_CHANNEL_8 + * @arg @ref LL_ADC_CHANNEL_9 + * @arg @ref LL_ADC_CHANNEL_10 + * @arg @ref LL_ADC_CHANNEL_11 + * @arg @ref LL_ADC_CHANNEL_12 + * @arg @ref LL_ADC_CHANNEL_13 + * @arg @ref LL_ADC_CHANNEL_14 + * @arg @ref LL_ADC_CHANNEL_15 + * @arg @ref LL_ADC_CHANNEL_16 + * @arg @ref LL_ADC_CHANNEL_17 + * @arg @ref LL_ADC_CHANNEL_18 + */ +#define __LL_ADC_CHANNEL_INTERNAL_TO_EXTERNAL(__CHANNEL__) \ + ((__CHANNEL__) & ~ADC_CHANNEL_ID_INTERNAL_CH_MASK) + +/** + * @brief Helper macro to determine whether the internal channel + * selected is available on the ADC instance selected. + * @note The channel parameter must be a value defined from parameter + * definition of a ADC internal channel (LL_ADC_CHANNEL_VREFINT, + * LL_ADC_CHANNEL_TEMPSENSOR, ...), + * must not be a value defined from parameter definition of + * ADC external channel (LL_ADC_CHANNEL_1, LL_ADC_CHANNEL_2, ...) + * or a value from functions where a channel number is + * returned from ADC registers, + * because internal and external channels share the same channel + * number in ADC registers. The differentiation is made only with + * parameters definitions of driver. + * @param __ADC_INSTANCE__ ADC instance + * @param __CHANNEL__ This parameter can be one of the following values: + * @arg @ref LL_ADC_CHANNEL_VREFINT (3) + * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR (3) + * @arg @ref LL_ADC_CHANNEL_VCOMP (3) + * @arg @ref LL_ADC_CHANNEL_VOPAMP1 (3)(5) + * @arg @ref LL_ADC_CHANNEL_VOPAMP2 (3)(5) + * @arg @ref LL_ADC_CHANNEL_VOPAMP3 (3)(5) + * + * (1) On STM32L1, connection via routing interface (RI) specificity: fast channel (channel routed directly to ADC switch matrix).\n + * (2) On STM32L1, for devices with feature 'channels banks' available: Channel different in bank A and bank B.\n + * (3) On STM32L1, for devices with feature 'channels banks' available: Channel common to both bank A and bank B.\n + * (4) On STM32L1, parameter not available on all devices: only on STM32L1 Cat.4 and Cat.5.\n + * (5) On STM32L1, parameter not available on all devices: OPAMP1 and OPAMP2 available only on STM32L1 Cat.3, Cat.4 and Cat.5, OPAMP3 available only on STM32L1 Cat.4 and Cat.5 + * @retval Value "0" if the internal channel selected is not available on the ADC instance selected. + * Value "1" if the internal channel selected is available on the ADC instance selected. + */ +#if defined (OPAMP_CSR_OPA3PD) +#define __LL_ADC_IS_CHANNEL_INTERNAL_AVAILABLE(__ADC_INSTANCE__, __CHANNEL__) \ + ( \ + ((__CHANNEL__) == LL_ADC_CHANNEL_VREFINT) || \ + ((__CHANNEL__) == LL_ADC_CHANNEL_TEMPSENSOR) || \ + ((__CHANNEL__) == LL_ADC_CHANNEL_VCOMP) || \ + ((__CHANNEL__) == LL_ADC_CHANNEL_VOPAMP1) || \ + ((__CHANNEL__) == LL_ADC_CHANNEL_VOPAMP2) || \ + ((__CHANNEL__) == LL_ADC_CHANNEL_VOPAMP3) \ + ) +#elif defined(OPAMP_CSR_OPA1PD) || defined (OPAMP_CSR_OPA2PD) +#define __LL_ADC_IS_CHANNEL_INTERNAL_AVAILABLE(__ADC_INSTANCE__, __CHANNEL__) \ + ( \ + ((__CHANNEL__) == LL_ADC_CHANNEL_VREFINT) || \ + ((__CHANNEL__) == LL_ADC_CHANNEL_TEMPSENSOR) || \ + ((__CHANNEL__) == LL_ADC_CHANNEL_VCOMP) || \ + ((__CHANNEL__) == LL_ADC_CHANNEL_VOPAMP1) || \ + ((__CHANNEL__) == LL_ADC_CHANNEL_VOPAMP2) \ + ) +#else +#define __LL_ADC_IS_CHANNEL_INTERNAL_AVAILABLE(__ADC_INSTANCE__, __CHANNEL__) \ + ( \ + ((__CHANNEL__) == LL_ADC_CHANNEL_VREFINT) || \ + ((__CHANNEL__) == LL_ADC_CHANNEL_TEMPSENSOR) || \ + ((__CHANNEL__) == LL_ADC_CHANNEL_VCOMP) \ + ) +#endif + +/** + * @brief Helper macro to define ADC analog watchdog parameter: + * define a single channel to monitor with analog watchdog + * from sequencer channel and groups definition. + * @note To be used with function @ref LL_ADC_SetAnalogWDMonitChannels(). + * Example: + * LL_ADC_SetAnalogWDMonitChannels( + * ADC1, LL_ADC_AWD1, + * __LL_ADC_ANALOGWD_CHANNEL_GROUP(LL_ADC_CHANNEL4, LL_ADC_GROUP_REGULAR)) + * @param __CHANNEL__ This parameter can be one of the following values: + * @arg @ref LL_ADC_CHANNEL_0 (2) + * @arg @ref LL_ADC_CHANNEL_1 (2) + * @arg @ref LL_ADC_CHANNEL_2 (2) + * @arg @ref LL_ADC_CHANNEL_3 (2) + * @arg @ref LL_ADC_CHANNEL_4 (1) + * @arg @ref LL_ADC_CHANNEL_5 (1) + * @arg @ref LL_ADC_CHANNEL_6 (2) + * @arg @ref LL_ADC_CHANNEL_7 (2) + * @arg @ref LL_ADC_CHANNEL_8 (2) + * @arg @ref LL_ADC_CHANNEL_9 (2) + * @arg @ref LL_ADC_CHANNEL_10 (2) + * @arg @ref LL_ADC_CHANNEL_11 (2) + * @arg @ref LL_ADC_CHANNEL_12 (2) + * @arg @ref LL_ADC_CHANNEL_13 (3) + * @arg @ref LL_ADC_CHANNEL_14 (3) + * @arg @ref LL_ADC_CHANNEL_15 (3) + * @arg @ref LL_ADC_CHANNEL_16 (3) + * @arg @ref LL_ADC_CHANNEL_17 (3) + * @arg @ref LL_ADC_CHANNEL_18 (3) + * @arg @ref LL_ADC_CHANNEL_19 (3) + * @arg @ref LL_ADC_CHANNEL_20 (3) + * @arg @ref LL_ADC_CHANNEL_21 (3) + * @arg @ref LL_ADC_CHANNEL_22 (1) + * @arg @ref LL_ADC_CHANNEL_23 (1) + * @arg @ref LL_ADC_CHANNEL_24 (1) + * @arg @ref LL_ADC_CHANNEL_25 (1) + * @arg @ref LL_ADC_CHANNEL_26 (3) + * @arg @ref LL_ADC_CHANNEL_27 (3)(4) + * @arg @ref LL_ADC_CHANNEL_28 (3)(4) + * @arg @ref LL_ADC_CHANNEL_29 (3)(4) + * @arg @ref LL_ADC_CHANNEL_30 (3)(4) + * @arg @ref LL_ADC_CHANNEL_31 (3)(4) + * @arg @ref LL_ADC_CHANNEL_VREFINT (3)(6) + * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR (3)(6) + * @arg @ref LL_ADC_CHANNEL_VCOMP (3)(6) + * @arg @ref LL_ADC_CHANNEL_VOPAMP1 (3)(5) + * @arg @ref LL_ADC_CHANNEL_VOPAMP2 (3)(5) + * @arg @ref LL_ADC_CHANNEL_VOPAMP3 (3)(5) + * + * (1) On STM32L1, connection via routing interface (RI) specificity: fast channel (channel routed directly to ADC switch matrix).\n + * (2) On STM32L1, for devices with feature 'channels banks' available: Channel different in bank A and bank B.\n + * (3) On STM32L1, for devices with feature 'channels banks' available: Channel common to both bank A and bank B.\n + * (4) On STM32L1, parameter not available on all devices: only on STM32L1 Cat.4 and Cat.5.\n + * (5) On STM32L1, parameter not available on all devices: OPAMP1 and OPAMP2 available only on STM32L1 Cat.3, Cat.4 and Cat.5, OPAMP3 available only on STM32L1 Cat.4 and Cat.5.\n + * (6) For ADC channel read back from ADC register, + * comparison with internal channel parameter to be done + * using helper macro @ref __LL_ADC_CHANNEL_INTERNAL_TO_EXTERNAL(). + * @param __GROUP__ This parameter can be one of the following values: + * @arg @ref LL_ADC_GROUP_REGULAR + * @arg @ref LL_ADC_GROUP_INJECTED + * @arg @ref LL_ADC_GROUP_REGULAR_INJECTED + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_AWD_DISABLE + * @arg @ref LL_ADC_AWD_ALL_CHANNELS_REG + * @arg @ref LL_ADC_AWD_ALL_CHANNELS_INJ + * @arg @ref LL_ADC_AWD_ALL_CHANNELS_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_0_REG (2) + * @arg @ref LL_ADC_AWD_CHANNEL_0_INJ (2) + * @arg @ref LL_ADC_AWD_CHANNEL_0_REG_INJ (2) + * @arg @ref LL_ADC_AWD_CHANNEL_1_REG (2) + * @arg @ref LL_ADC_AWD_CHANNEL_1_INJ (2) + * @arg @ref LL_ADC_AWD_CHANNEL_1_REG_INJ (2) + * @arg @ref LL_ADC_AWD_CHANNEL_2_REG (2) + * @arg @ref LL_ADC_AWD_CHANNEL_2_INJ (2) + * @arg @ref LL_ADC_AWD_CHANNEL_2_REG_INJ (2) + * @arg @ref LL_ADC_AWD_CHANNEL_3_REG (2) + * @arg @ref LL_ADC_AWD_CHANNEL_3_INJ (2) + * @arg @ref LL_ADC_AWD_CHANNEL_3_REG_INJ (2) + * @arg @ref LL_ADC_AWD_CHANNEL_4_REG (1) + * @arg @ref LL_ADC_AWD_CHANNEL_4_INJ (1) + * @arg @ref LL_ADC_AWD_CHANNEL_4_REG_INJ (1) + * @arg @ref LL_ADC_AWD_CHANNEL_5_REG (1) + * @arg @ref LL_ADC_AWD_CHANNEL_5_INJ (1) + * @arg @ref LL_ADC_AWD_CHANNEL_5_REG_INJ (1) + * @arg @ref LL_ADC_AWD_CHANNEL_6_REG (2) + * @arg @ref LL_ADC_AWD_CHANNEL_6_INJ (2) + * @arg @ref LL_ADC_AWD_CHANNEL_6_REG_INJ (2) + * @arg @ref LL_ADC_AWD_CHANNEL_7_REG (2) + * @arg @ref LL_ADC_AWD_CHANNEL_7_INJ (2) + * @arg @ref LL_ADC_AWD_CHANNEL_7_REG_INJ (2) + * @arg @ref LL_ADC_AWD_CHANNEL_8_REG (2) + * @arg @ref LL_ADC_AWD_CHANNEL_8_INJ (2) + * @arg @ref LL_ADC_AWD_CHANNEL_8_REG_INJ (2) + * @arg @ref LL_ADC_AWD_CHANNEL_9_REG (2) + * @arg @ref LL_ADC_AWD_CHANNEL_9_INJ (2) + * @arg @ref LL_ADC_AWD_CHANNEL_9_REG_INJ (2) + * @arg @ref LL_ADC_AWD_CHANNEL_10_REG (2) + * @arg @ref LL_ADC_AWD_CHANNEL_10_INJ (2) + * @arg @ref LL_ADC_AWD_CHANNEL_10_REG_INJ (2) + * @arg @ref LL_ADC_AWD_CHANNEL_11_REG (2) + * @arg @ref LL_ADC_AWD_CHANNEL_11_INJ (2) + * @arg @ref LL_ADC_AWD_CHANNEL_11_REG_INJ (2) + * @arg @ref LL_ADC_AWD_CHANNEL_12_REG (2) + * @arg @ref LL_ADC_AWD_CHANNEL_12_INJ (2) + * @arg @ref LL_ADC_AWD_CHANNEL_12_REG_INJ (2) + * @arg @ref LL_ADC_AWD_CHANNEL_13_REG (3) + * @arg @ref LL_ADC_AWD_CHANNEL_13_INJ (3) + * @arg @ref LL_ADC_AWD_CHANNEL_13_REG_INJ (3) + * @arg @ref LL_ADC_AWD_CHANNEL_14_REG (3) + * @arg @ref LL_ADC_AWD_CHANNEL_14_INJ (3) + * @arg @ref LL_ADC_AWD_CHANNEL_14_REG_INJ (3) + * @arg @ref LL_ADC_AWD_CHANNEL_15_REG (3) + * @arg @ref LL_ADC_AWD_CHANNEL_15_INJ (3) + * @arg @ref LL_ADC_AWD_CHANNEL_15_REG_INJ (3) + * @arg @ref LL_ADC_AWD_CHANNEL_16_REG (3) + * @arg @ref LL_ADC_AWD_CHANNEL_16_INJ (3) + * @arg @ref LL_ADC_AWD_CHANNEL_16_REG_INJ (3) + * @arg @ref LL_ADC_AWD_CHANNEL_17_REG (3) + * @arg @ref LL_ADC_AWD_CHANNEL_17_INJ (3) + * @arg @ref LL_ADC_AWD_CHANNEL_17_REG_INJ (3) + * @arg @ref LL_ADC_AWD_CHANNEL_18_REG (3) + * @arg @ref LL_ADC_AWD_CHANNEL_18_INJ (3) + * @arg @ref LL_ADC_AWD_CHANNEL_18_REG_INJ (3) + * @arg @ref LL_ADC_AWD_CHANNEL_19_REG (3) + * @arg @ref LL_ADC_AWD_CHANNEL_19_INJ (3) + * @arg @ref LL_ADC_AWD_CHANNEL_19_REG_INJ (3) + * @arg @ref LL_ADC_AWD_CHANNEL_20_REG (3) + * @arg @ref LL_ADC_AWD_CHANNEL_20_INJ (3) + * @arg @ref LL_ADC_AWD_CHANNEL_20_REG_INJ (3) + * @arg @ref LL_ADC_AWD_CHANNEL_21_REG (3) + * @arg @ref LL_ADC_AWD_CHANNEL_21_INJ (3) + * @arg @ref LL_ADC_AWD_CHANNEL_21_REG_INJ (3) + * @arg @ref LL_ADC_AWD_CHANNEL_22_REG (1) + * @arg @ref LL_ADC_AWD_CHANNEL_22_INJ (1) + * @arg @ref LL_ADC_AWD_CHANNEL_22_REG_INJ (1) + * @arg @ref LL_ADC_AWD_CHANNEL_23_REG (1) + * @arg @ref LL_ADC_AWD_CHANNEL_23_INJ (1) + * @arg @ref LL_ADC_AWD_CHANNEL_23_REG_INJ (1) + * @arg @ref LL_ADC_AWD_CHANNEL_24_REG (1) + * @arg @ref LL_ADC_AWD_CHANNEL_24_INJ (1) + * @arg @ref LL_ADC_AWD_CHANNEL_24_REG_INJ (1) + * @arg @ref LL_ADC_AWD_CHANNEL_25_REG (1) + * @arg @ref LL_ADC_AWD_CHANNEL_25_INJ (1) + * @arg @ref LL_ADC_AWD_CHANNEL_25_REG_INJ (1) + * @arg @ref LL_ADC_AWD_CHANNEL_26_REG (3) + * @arg @ref LL_ADC_AWD_CHANNEL_26_INJ (3) + * @arg @ref LL_ADC_AWD_CHANNEL_26_REG_INJ (3) + * @arg @ref LL_ADC_AWD_CHANNEL_27_REG (3)(4) + * @arg @ref LL_ADC_AWD_CHANNEL_27_INJ (3)(4) + * @arg @ref LL_ADC_AWD_CHANNEL_27_REG_INJ (3)(4) + * @arg @ref LL_ADC_AWD_CHANNEL_28_REG (3)(4) + * @arg @ref LL_ADC_AWD_CHANNEL_28_INJ (3)(4) + * @arg @ref LL_ADC_AWD_CHANNEL_28_REG_INJ (3)(4) + * @arg @ref LL_ADC_AWD_CHANNEL_29_REG (3)(4) + * @arg @ref LL_ADC_AWD_CHANNEL_29_INJ (3)(4) + * @arg @ref LL_ADC_AWD_CHANNEL_29_REG_INJ (3)(4) + * @arg @ref LL_ADC_AWD_CHANNEL_30_REG (3)(4) + * @arg @ref LL_ADC_AWD_CHANNEL_30_INJ (3)(4) + * @arg @ref LL_ADC_AWD_CHANNEL_30_REG_INJ (3)(4) + * @arg @ref LL_ADC_AWD_CHANNEL_31_REG (3)(4) + * @arg @ref LL_ADC_AWD_CHANNEL_31_INJ (3)(4) + * @arg @ref LL_ADC_AWD_CHANNEL_31_REG_INJ (3)(4) + * @arg @ref LL_ADC_AWD_CH_VREFINT_REG (3) + * @arg @ref LL_ADC_AWD_CH_VREFINT_INJ (3) + * @arg @ref LL_ADC_AWD_CH_VREFINT_REG_INJ (3) + * @arg @ref LL_ADC_AWD_CH_TEMPSENSOR_REG (3) + * @arg @ref LL_ADC_AWD_CH_TEMPSENSOR_INJ (3) + * @arg @ref LL_ADC_AWD_CH_TEMPSENSOR_REG_INJ (3) + * @arg @ref LL_ADC_AWD_CH_VCOMP_REG (3) + * @arg @ref LL_ADC_AWD_CH_VCOMP_INJ (3) + * @arg @ref LL_ADC_AWD_CH_VCOMP_REG_INJ (3) + * @arg @ref LL_ADC_AWD_CH_VOPAMP1_REG (3)(5) + * @arg @ref LL_ADC_AWD_CH_VOPAMP1_INJ (3)(5) + * @arg @ref LL_ADC_AWD_CH_VOPAMP1_REG_INJ (3)(5) + * @arg @ref LL_ADC_AWD_CH_VOPAMP2_REG (3)(5) + * @arg @ref LL_ADC_AWD_CH_VOPAMP2_INJ (3)(5) + * @arg @ref LL_ADC_AWD_CH_VOPAMP2_REG_INJ (3)(5) + * @arg @ref LL_ADC_AWD_CH_VOPAMP3_REG (3)(5) + * @arg @ref LL_ADC_AWD_CH_VOPAMP3_INJ (3)(5) + * @arg @ref LL_ADC_AWD_CH_VOPAMP3_REG_INJ (3)(5) + * + * (1) On STM32L1, connection via routing interface (RI) specificity: fast channel (channel routed directly to ADC switch matrix).\n + * (2) On STM32L1, for devices with feature 'channels banks' available: Channel different in bank A and bank B.\n + * (3) On STM32L1, for devices with feature 'channels banks' available: Channel common to both bank A and bank B.\n + * (4) On STM32L1, parameter not available on all devices: only on STM32L1 Cat.4 and Cat.5.\n + * (5) On STM32L1, parameter not available on all devices: OPAMP1 and OPAMP2 available only on STM32L1 Cat.3, Cat.4 and Cat.5, OPAMP3 available only on STM32L1 Cat.4 and Cat.5 + */ +#define __LL_ADC_ANALOGWD_CHANNEL_GROUP(__CHANNEL__, __GROUP__) \ + (((__GROUP__) == LL_ADC_GROUP_REGULAR) \ + ? (((__CHANNEL__) & ADC_CHANNEL_ID_MASK) | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) \ + : \ + ((__GROUP__) == LL_ADC_GROUP_INJECTED) \ + ? (((__CHANNEL__) & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDSGL) \ + : \ + (((__CHANNEL__) & ADC_CHANNEL_ID_MASK) | ADC_CR1_JAWDEN | ADC_CR1_AWDEN | ADC_CR1_AWDSGL) \ + ) + +/** + * @brief Helper macro to set the value of ADC analog watchdog threshold high + * or low in function of ADC resolution, when ADC resolution is + * different of 12 bits. + * @note To be used with function @ref LL_ADC_SetAnalogWDThresholds(). + * Example, with a ADC resolution of 8 bits, to set the value of + * analog watchdog threshold high (on 8 bits): + * LL_ADC_SetAnalogWDThresholds + * (< ADCx param >, + * __LL_ADC_ANALOGWD_SET_THRESHOLD_RESOLUTION(LL_ADC_RESOLUTION_8B, ) + * ); + * @param __ADC_RESOLUTION__ This parameter can be one of the following values: + * @arg @ref LL_ADC_RESOLUTION_12B + * @arg @ref LL_ADC_RESOLUTION_10B + * @arg @ref LL_ADC_RESOLUTION_8B + * @arg @ref LL_ADC_RESOLUTION_6B + * @param __AWD_THRESHOLD__ Value between Min_Data=0x000 and Max_Data=0xFFF + * @retval Value between Min_Data=0x000 and Max_Data=0xFFF + */ +#define __LL_ADC_ANALOGWD_SET_THRESHOLD_RESOLUTION(__ADC_RESOLUTION__, __AWD_THRESHOLD__) \ + ((__AWD_THRESHOLD__) << ((__ADC_RESOLUTION__) >> (ADC_CR1_RES_BITOFFSET_POS - 1U ))) + +/** + * @brief Helper macro to get the value of ADC analog watchdog threshold high + * or low in function of ADC resolution, when ADC resolution is + * different of 12 bits. + * @note To be used with function @ref LL_ADC_GetAnalogWDThresholds(). + * Example, with a ADC resolution of 8 bits, to get the value of + * analog watchdog threshold high (on 8 bits): + * < threshold_value_6_bits > = __LL_ADC_ANALOGWD_GET_THRESHOLD_RESOLUTION + * (LL_ADC_RESOLUTION_8B, + * LL_ADC_GetAnalogWDThresholds(, LL_ADC_AWD_THRESHOLD_HIGH) + * ); + * @param __ADC_RESOLUTION__ This parameter can be one of the following values: + * @arg @ref LL_ADC_RESOLUTION_12B + * @arg @ref LL_ADC_RESOLUTION_10B + * @arg @ref LL_ADC_RESOLUTION_8B + * @arg @ref LL_ADC_RESOLUTION_6B + * @param __AWD_THRESHOLD_12_BITS__ Value between Min_Data=0x000 and Max_Data=0xFFF + * @retval Value between Min_Data=0x000 and Max_Data=0xFFF + */ +#define __LL_ADC_ANALOGWD_GET_THRESHOLD_RESOLUTION(__ADC_RESOLUTION__, __AWD_THRESHOLD_12_BITS__) \ + ((__AWD_THRESHOLD_12_BITS__) >> ((__ADC_RESOLUTION__) >> (ADC_CR1_RES_BITOFFSET_POS - 1U ))) + +/** + * @brief Helper macro to select the ADC common instance + * to which is belonging the selected ADC instance. + * @note ADC common register instance can be used for: + * - Set parameters common to several ADC instances + * - Multimode (for devices with several ADC instances) + * Refer to functions having argument "ADCxy_COMMON" as parameter. + * @param __ADCx__ ADC instance + * @retval ADC common register instance + */ +#define __LL_ADC_COMMON_INSTANCE(__ADCx__) \ + (ADC1_COMMON) + +/** + * @brief Helper macro to check if all ADC instances sharing the same + * ADC common instance are disabled. + * @note This check is required by functions with setting conditioned to + * ADC state: + * All ADC instances of the ADC common group must be disabled. + * Refer to functions having argument "ADCxy_COMMON" as parameter. + * @note On devices with only 1 ADC common instance, parameter of this macro + * is useless and can be ignored (parameter kept for compatibility + * with devices featuring several ADC common instances). + * @param __ADCXY_COMMON__ ADC common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) + * @retval Value "0" if all ADC instances sharing the same ADC common instance + * are disabled. + * Value "1" if at least one ADC instance sharing the same ADC common instance + * is enabled. + */ +#define __LL_ADC_IS_ENABLED_ALL_COMMON_INSTANCE(__ADCXY_COMMON__) \ + LL_ADC_IsEnabled(ADC1) + +/** + * @brief Helper macro to define the ADC conversion data full-scale digital + * value corresponding to the selected ADC resolution. + * @note ADC conversion data full-scale corresponds to voltage range + * determined by analog voltage references Vref+ and Vref- + * (refer to reference manual). + * @param __ADC_RESOLUTION__ This parameter can be one of the following values: + * @arg @ref LL_ADC_RESOLUTION_12B + * @arg @ref LL_ADC_RESOLUTION_10B + * @arg @ref LL_ADC_RESOLUTION_8B + * @arg @ref LL_ADC_RESOLUTION_6B + * @retval ADC conversion data equivalent voltage value (unit: mVolt) + */ +#define __LL_ADC_DIGITAL_SCALE(__ADC_RESOLUTION__) \ + (((uint32_t)0xFFFU) >> ((__ADC_RESOLUTION__) >> (ADC_CR1_RES_BITOFFSET_POS - 1U))) + +/** + * @brief Helper macro to convert the ADC conversion data from + * a resolution to another resolution. + * @param __DATA__ ADC conversion data to be converted + * @param __ADC_RESOLUTION_CURRENT__ Resolution of to the data to be converted + * This parameter can be one of the following values: + * @arg @ref LL_ADC_RESOLUTION_12B + * @arg @ref LL_ADC_RESOLUTION_10B + * @arg @ref LL_ADC_RESOLUTION_8B + * @arg @ref LL_ADC_RESOLUTION_6B + * @param __ADC_RESOLUTION_TARGET__ Resolution of the data after conversion + * This parameter can be one of the following values: + * @arg @ref LL_ADC_RESOLUTION_12B + * @arg @ref LL_ADC_RESOLUTION_10B + * @arg @ref LL_ADC_RESOLUTION_8B + * @arg @ref LL_ADC_RESOLUTION_6B + * @retval ADC conversion data to the requested resolution + */ +#define __LL_ADC_CONVERT_DATA_RESOLUTION(__DATA__, __ADC_RESOLUTION_CURRENT__, __ADC_RESOLUTION_TARGET__) \ + (((__DATA__) \ + << ((__ADC_RESOLUTION_CURRENT__) >> (ADC_CR1_RES_BITOFFSET_POS - 1U))) \ + >> ((__ADC_RESOLUTION_TARGET__) >> (ADC_CR1_RES_BITOFFSET_POS - 1U)) \ + ) + +/** + * @brief Helper macro to calculate the voltage (unit: mVolt) + * corresponding to a ADC conversion data (unit: digital value). + * @note Analog reference voltage (Vref+) must be either known from + * user board environment or can be calculated using ADC measurement + * and ADC helper macro @ref __LL_ADC_CALC_VREFANALOG_VOLTAGE(). + * @param __VREFANALOG_VOLTAGE__ Analog reference voltage (unit: mV) + * @param __ADC_DATA__ ADC conversion data (resolution 12 bits) + * (unit: digital value). + * @param __ADC_RESOLUTION__ This parameter can be one of the following values: + * @arg @ref LL_ADC_RESOLUTION_12B + * @arg @ref LL_ADC_RESOLUTION_10B + * @arg @ref LL_ADC_RESOLUTION_8B + * @arg @ref LL_ADC_RESOLUTION_6B + * @retval ADC conversion data equivalent voltage value (unit: mVolt) + */ +#define __LL_ADC_CALC_DATA_TO_VOLTAGE(__VREFANALOG_VOLTAGE__,\ + __ADC_DATA__,\ + __ADC_RESOLUTION__) \ + ((__ADC_DATA__) * (__VREFANALOG_VOLTAGE__) \ + / __LL_ADC_DIGITAL_SCALE(__ADC_RESOLUTION__) \ + ) + +/** + * @brief Helper macro to calculate analog reference voltage (Vref+) + * (unit: mVolt) from ADC conversion data of internal voltage + * reference VrefInt. + * @note Computation is using VrefInt calibration value + * stored in system memory for each device during production. + * @note This voltage depends on user board environment: voltage level + * connected to pin Vref+. + * On devices with small package, the pin Vref+ is not present + * and internally bonded to pin Vdda. + * @note On this STM32 serie, calibration data of internal voltage reference + * VrefInt corresponds to a resolution of 12 bits, + * this is the recommended ADC resolution to convert voltage of + * internal voltage reference VrefInt. + * Otherwise, this macro performs the processing to scale + * ADC conversion data to 12 bits. + * @param __VREFINT_ADC_DATA__: ADC conversion data (resolution 12 bits) + * of internal voltage reference VrefInt (unit: digital value). + * @param __ADC_RESOLUTION__ This parameter can be one of the following values: + * @arg @ref LL_ADC_RESOLUTION_12B + * @arg @ref LL_ADC_RESOLUTION_10B + * @arg @ref LL_ADC_RESOLUTION_8B + * @arg @ref LL_ADC_RESOLUTION_6B + * @retval Analog reference voltage (unit: mV) + */ +#define __LL_ADC_CALC_VREFANALOG_VOLTAGE(__VREFINT_ADC_DATA__,\ + __ADC_RESOLUTION__) \ + (((uint32_t)(*VREFINT_CAL_ADDR) * VREFINT_CAL_VREF) \ + / __LL_ADC_CONVERT_DATA_RESOLUTION((__VREFINT_ADC_DATA__), \ + (__ADC_RESOLUTION__), \ + LL_ADC_RESOLUTION_12B) \ + ) + +/** + * @brief Helper macro to calculate the temperature (unit: degree Celsius) + * from ADC conversion data of internal temperature sensor. + * @note Computation is using temperature sensor calibration values + * stored in system memory for each device during production. + * @note Calculation formula: + * Temperature = ((TS_ADC_DATA - TS_CAL1) + * * (TS_CAL2_TEMP - TS_CAL1_TEMP)) + * / (TS_CAL2 - TS_CAL1) + TS_CAL1_TEMP + * with TS_ADC_DATA = temperature sensor raw data measured by ADC + * Avg_Slope = (TS_CAL2 - TS_CAL1) + * / (TS_CAL2_TEMP - TS_CAL1_TEMP) + * TS_CAL1 = equivalent TS_ADC_DATA at temperature + * TEMP_DEGC_CAL1 (calibrated in factory) + * TS_CAL2 = equivalent TS_ADC_DATA at temperature + * TEMP_DEGC_CAL2 (calibrated in factory) + * Caution: Calculation relevancy under reserve that calibration + * parameters are correct (address and data). + * To calculate temperature using temperature sensor + * datasheet typical values (generic values less, therefore + * less accurate than calibrated values), + * use helper macro @ref __LL_ADC_CALC_TEMPERATURE_TYP_PARAMS(). + * @note As calculation input, the analog reference voltage (Vref+) must be + * defined as it impacts the ADC LSB equivalent voltage. + * @note Analog reference voltage (Vref+) must be either known from + * user board environment or can be calculated using ADC measurement + * and ADC helper macro @ref __LL_ADC_CALC_VREFANALOG_VOLTAGE(). + * @note On this STM32 serie, calibration data of temperature sensor + * corresponds to a resolution of 12 bits, + * this is the recommended ADC resolution to convert voltage of + * temperature sensor. + * Otherwise, this macro performs the processing to scale + * ADC conversion data to 12 bits. + * @param __VREFANALOG_VOLTAGE__ Analog reference voltage (unit: mV) + * @param __TEMPSENSOR_ADC_DATA__ ADC conversion data of internal + * temperature sensor (unit: digital value). + * @param __ADC_RESOLUTION__ ADC resolution at which internal temperature + * sensor voltage has been measured. + * This parameter can be one of the following values: + * @arg @ref LL_ADC_RESOLUTION_12B + * @arg @ref LL_ADC_RESOLUTION_10B + * @arg @ref LL_ADC_RESOLUTION_8B + * @arg @ref LL_ADC_RESOLUTION_6B + * @retval Temperature (unit: degree Celsius) + */ +#define __LL_ADC_CALC_TEMPERATURE(__VREFANALOG_VOLTAGE__,\ + __TEMPSENSOR_ADC_DATA__,\ + __ADC_RESOLUTION__) \ + (((( ((int32_t)((__LL_ADC_CONVERT_DATA_RESOLUTION((__TEMPSENSOR_ADC_DATA__), \ + (__ADC_RESOLUTION__), \ + LL_ADC_RESOLUTION_12B) \ + * (__VREFANALOG_VOLTAGE__)) \ + / TEMPSENSOR_CAL_VREFANALOG) \ + - (int32_t) *TEMPSENSOR_CAL1_ADDR) \ + ) * (int32_t)(TEMPSENSOR_CAL2_TEMP - TEMPSENSOR_CAL1_TEMP) \ + ) / (int32_t)((int32_t)*TEMPSENSOR_CAL2_ADDR - (int32_t)*TEMPSENSOR_CAL1_ADDR) \ + ) + TEMPSENSOR_CAL1_TEMP \ + ) + +/** + * @brief Helper macro to calculate the temperature (unit: degree Celsius) + * from ADC conversion data of internal temperature sensor. + * @note Computation is using temperature sensor typical values + * (refer to device datasheet). + * @note Calculation formula: + * Temperature = (TS_TYP_CALx_VOLT(uV) - TS_ADC_DATA * Conversion_uV) + * / Avg_Slope + CALx_TEMP + * with TS_ADC_DATA = temperature sensor raw data measured by ADC + * (unit: digital value) + * Avg_Slope = temperature sensor slope + * (unit: uV/Degree Celsius) + * TS_TYP_CALx_VOLT = temperature sensor digital value at + * temperature CALx_TEMP (unit: mV) + * Caution: Calculation relevancy under reserve the temperature sensor + * of the current device has characteristics in line with + * datasheet typical values. + * If temperature sensor calibration values are available on + * on this device (presence of macro __LL_ADC_CALC_TEMPERATURE()), + * temperature calculation will be more accurate using + * helper macro @ref __LL_ADC_CALC_TEMPERATURE(). + * @note As calculation input, the analog reference voltage (Vref+) must be + * defined as it impacts the ADC LSB equivalent voltage. + * @note Analog reference voltage (Vref+) must be either known from + * user board environment or can be calculated using ADC measurement + * and ADC helper macro @ref __LL_ADC_CALC_VREFANALOG_VOLTAGE(). + * @note ADC measurement data must correspond to a resolution of 12bits + * (full scale digital value 4095). If not the case, the data must be + * preliminarily rescaled to an equivalent resolution of 12 bits. + * @param __TEMPSENSOR_TYP_AVGSLOPE__ Device datasheet data: Temperature sensor slope typical value (unit: uV/DegCelsius). + * On STM32L1, refer to device datasheet parameter "Avg_Slope". + * @param __TEMPSENSOR_TYP_CALX_V__ Device datasheet data: Temperature sensor voltage typical value (at temperature and Vref+ defined in parameters below) (unit: mV). + * On STM32L1, refer to device datasheet parameter "V110" (corresponding to TS_CAL2). + * @param __TEMPSENSOR_CALX_TEMP__ Device datasheet data: Temperature at which temperature sensor voltage (see parameter above) is corresponding (unit: mV) + * @param __VREFANALOG_VOLTAGE__ Analog voltage reference (Vref+) voltage (unit: mV) + * @param __TEMPSENSOR_ADC_DATA__ ADC conversion data of internal temperature sensor (unit: digital value). + * @param __ADC_RESOLUTION__ ADC resolution at which internal temperature sensor voltage has been measured. + * This parameter can be one of the following values: + * @arg @ref LL_ADC_RESOLUTION_12B + * @arg @ref LL_ADC_RESOLUTION_10B + * @arg @ref LL_ADC_RESOLUTION_8B + * @arg @ref LL_ADC_RESOLUTION_6B + * @retval Temperature (unit: degree Celsius) + */ +#define __LL_ADC_CALC_TEMPERATURE_TYP_PARAMS(__TEMPSENSOR_TYP_AVGSLOPE__,\ + __TEMPSENSOR_TYP_CALX_V__,\ + __TEMPSENSOR_CALX_TEMP__,\ + __VREFANALOG_VOLTAGE__,\ + __TEMPSENSOR_ADC_DATA__,\ + __ADC_RESOLUTION__) \ + ((( ( \ + (int32_t)((((__TEMPSENSOR_ADC_DATA__) * (__VREFANALOG_VOLTAGE__)) \ + / __LL_ADC_DIGITAL_SCALE(__ADC_RESOLUTION__)) \ + * 1000) \ + - \ + (int32_t)(((__TEMPSENSOR_TYP_CALX_V__)) \ + * 1000) \ + ) \ + ) / (__TEMPSENSOR_TYP_AVGSLOPE__) \ + ) + (__TEMPSENSOR_CALX_TEMP__) \ + ) + +/** + * @} + */ + +/** + * @} + */ + + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup ADC_LL_Exported_Functions ADC Exported Functions + * @{ + */ + +/** @defgroup ADC_LL_EF_DMA_Management ADC DMA management + * @{ + */ +/* Note: LL ADC functions to set DMA transfer are located into sections of */ +/* configuration of ADC instance, groups and multimode (if available): */ +/* @ref LL_ADC_REG_SetDMATransfer(), ... */ + +/** + * @brief Function to help to configure DMA transfer from ADC: retrieve the + * ADC register address from ADC instance and a list of ADC registers + * intended to be used (most commonly) with DMA transfer. + * @note These ADC registers are data registers: + * when ADC conversion data is available in ADC data registers, + * ADC generates a DMA transfer request. + * @note This macro is intended to be used with LL DMA driver, refer to + * function "LL_DMA_ConfigAddresses()". + * Example: + * LL_DMA_ConfigAddresses(DMA1, + * LL_DMA_CHANNEL_1, + * LL_ADC_DMA_GetRegAddr(ADC1, LL_ADC_DMA_REG_REGULAR_DATA), + * (uint32_t)&< array or variable >, + * LL_DMA_DIRECTION_PERIPH_TO_MEMORY); + * @note For devices with several ADC: in multimode, some devices + * use a different data register outside of ADC instance scope + * (common data register). This macro manages this register difference, + * only ADC instance has to be set as parameter. + * @rmtoll DR DATA LL_ADC_DMA_GetRegAddr + * @param ADCx ADC instance + * @param Register This parameter can be one of the following values: + * @arg @ref LL_ADC_DMA_REG_REGULAR_DATA + * @retval ADC register address + */ +__STATIC_INLINE uint32_t LL_ADC_DMA_GetRegAddr(ADC_TypeDef *ADCx, uint32_t Register) +{ + /* Retrieve address of register DR */ + return (uint32_t)&(ADCx->DR); +} + +/** + * @} + */ + +/** @defgroup ADC_LL_EF_Configuration_ADC_Common Configuration of ADC hierarchical scope: common to several ADC instances + * @{ + */ + +/** + * @brief Set parameter common to several ADC: Clock source and prescaler. + * @note On this STM32 serie, HSI RC oscillator is the only clock source for ADC. + * Therefore, HSI RC oscillator must be preliminarily enabled at RCC top level. + * @note On this STM32 serie, some clock ratio constraints between ADC clock and APB clock + * must be respected: + * - In all cases: if APB clock frequency is too low compared ADC clock frequency, a delay between conversions must be inserted. + * - If ADC group injected is used: ADC clock frequency should be lower than APB clock frequency /4 for resolution 12 or 10 bits, APB clock frequency /3 for resolution 8 bits, APB clock frequency /2 for resolution 6 bits. + * Refer to reference manual. + * @rmtoll CCR ADCPRE LL_ADC_SetCommonClock + * @param ADCxy_COMMON ADC common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) + * @param CommonClock This parameter can be one of the following values: + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV1 + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV2 + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV4 + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetCommonClock(ADC_Common_TypeDef *ADCxy_COMMON, uint32_t CommonClock) +{ + MODIFY_REG(ADCxy_COMMON->CCR, ADC_CCR_ADCPRE, CommonClock); +} + +/** + * @brief Get parameter common to several ADC: Clock source and prescaler. + * @rmtoll CCR ADCPRE LL_ADC_GetCommonClock + * @param ADCxy_COMMON ADC common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV1 + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV2 + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV4 + */ +__STATIC_INLINE uint32_t LL_ADC_GetCommonClock(ADC_Common_TypeDef *ADCxy_COMMON) +{ + return (uint32_t)(READ_BIT(ADCxy_COMMON->CCR, ADC_CCR_ADCPRE)); +} + +/** + * @brief Set parameter common to several ADC: measurement path to internal + * channels (VrefInt, temperature sensor, ...). + * @note One or several values can be selected. + * Example: (LL_ADC_PATH_INTERNAL_VREFINT | + * LL_ADC_PATH_INTERNAL_TEMPSENSOR) + * @note Stabilization time of measurement path to internal channel: + * After enabling internal paths, before starting ADC conversion, + * a delay is required for internal voltage reference and + * temperature sensor stabilization time. + * Refer to device datasheet. + * Refer to literal @ref LL_ADC_DELAY_VREFINT_STAB_US. + * Refer to literal @ref LL_ADC_DELAY_TEMPSENSOR_STAB_US. + * @note ADC internal channel sampling time constraint: + * For ADC conversion of internal channels, + * a sampling time minimum value is required. + * Refer to device datasheet. + * @rmtoll CCR TSVREFE LL_ADC_SetCommonPathInternalCh + * @param ADCxy_COMMON ADC common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) + * @param PathInternal This parameter can be a combination of the following values: + * @arg @ref LL_ADC_PATH_INTERNAL_NONE + * @arg @ref LL_ADC_PATH_INTERNAL_VREFINT + * @arg @ref LL_ADC_PATH_INTERNAL_TEMPSENSOR + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetCommonPathInternalCh(ADC_Common_TypeDef *ADCxy_COMMON, uint32_t PathInternal) +{ + MODIFY_REG(ADCxy_COMMON->CCR, ADC_CCR_TSVREFE, PathInternal); +} + +/** + * @brief Get parameter common to several ADC: measurement path to internal + * channels (VrefInt, temperature sensor, ...). + * @note One or several values can be selected. + * Example: (LL_ADC_PATH_INTERNAL_VREFINT | + * LL_ADC_PATH_INTERNAL_TEMPSENSOR) + * @rmtoll CCR TSVREFE LL_ADC_GetCommonPathInternalCh + * @param ADCxy_COMMON ADC common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) + * @retval Returned value can be a combination of the following values: + * @arg @ref LL_ADC_PATH_INTERNAL_NONE + * @arg @ref LL_ADC_PATH_INTERNAL_VREFINT + * @arg @ref LL_ADC_PATH_INTERNAL_TEMPSENSOR + */ +__STATIC_INLINE uint32_t LL_ADC_GetCommonPathInternalCh(ADC_Common_TypeDef *ADCxy_COMMON) +{ + return (uint32_t)(READ_BIT(ADCxy_COMMON->CCR, ADC_CCR_TSVREFE)); +} + +/** + * @} + */ + +/** @defgroup ADC_LL_EF_Configuration_ADC_Instance Configuration of ADC hierarchical scope: ADC instance + * @{ + */ + +/** + * @brief Set ADC resolution. + * Refer to reference manual for alignments formats + * dependencies to ADC resolutions. + * @rmtoll CR1 RES LL_ADC_SetResolution + * @param ADCx ADC instance + * @param Resolution This parameter can be one of the following values: + * @arg @ref LL_ADC_RESOLUTION_12B + * @arg @ref LL_ADC_RESOLUTION_10B + * @arg @ref LL_ADC_RESOLUTION_8B + * @arg @ref LL_ADC_RESOLUTION_6B + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetResolution(ADC_TypeDef *ADCx, uint32_t Resolution) +{ + MODIFY_REG(ADCx->CR1, ADC_CR1_RES, Resolution); +} + +/** + * @brief Get ADC resolution. + * Refer to reference manual for alignments formats + * dependencies to ADC resolutions. + * @rmtoll CR1 RES LL_ADC_GetResolution + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_RESOLUTION_12B + * @arg @ref LL_ADC_RESOLUTION_10B + * @arg @ref LL_ADC_RESOLUTION_8B + * @arg @ref LL_ADC_RESOLUTION_6B + */ +__STATIC_INLINE uint32_t LL_ADC_GetResolution(ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CR1, ADC_CR1_RES)); +} + +/** + * @brief Set ADC conversion data alignment. + * @note Refer to reference manual for alignments formats + * dependencies to ADC resolutions. + * @rmtoll CR2 ALIGN LL_ADC_SetDataAlignment + * @param ADCx ADC instance + * @param DataAlignment This parameter can be one of the following values: + * @arg @ref LL_ADC_DATA_ALIGN_RIGHT + * @arg @ref LL_ADC_DATA_ALIGN_LEFT + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetDataAlignment(ADC_TypeDef *ADCx, uint32_t DataAlignment) +{ + MODIFY_REG(ADCx->CR2, ADC_CR2_ALIGN, DataAlignment); +} + +/** + * @brief Get ADC conversion data alignment. + * @note Refer to reference manual for alignments formats + * dependencies to ADC resolutions. + * @rmtoll CR2 ALIGN LL_ADC_SetDataAlignment + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_DATA_ALIGN_RIGHT + * @arg @ref LL_ADC_DATA_ALIGN_LEFT + */ +__STATIC_INLINE uint32_t LL_ADC_GetDataAlignment(ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CR2, ADC_CR2_ALIGN)); +} + +/** + * @brief Set ADC low power mode auto wait. + * @note Description of ADC low power modes: + * - ADC low power mode "auto wait": Dynamic low power mode, + * ADC conversions occurrences are limited to the minimum necessary + * in order to reduce power consumption. + * New ADC conversion starts only when the previous + * unitary conversion data (for ADC group regular) + * or previous sequence conversions data (for ADC group injected) + * has been retrieved by user software. + * In the meantime, ADC remains idle: does not performs any + * other conversion. + * This mode allows to automatically adapt the ADC conversions + * triggers to the speed of the software that reads the data. + * Moreover, this avoids risk of overrun for low frequency + * applications. + * How to use this low power mode: + * - Do not use with interruption or DMA since these modes + * have to clear immediately the EOC flag to free the + * IRQ vector sequencer. + * - Do use with polling: 1. Start conversion, + * 2. Later on, when conversion data is needed: poll for end of + * conversion to ensure that conversion is completed and + * retrieve ADC conversion data. This will trig another + * ADC conversion start. + * - ADC low power mode "auto power-off": + * refer to function @ref LL_ADC_SetLowPowerModeAutoPowerOff(). + * @note With ADC low power mode "auto wait", the ADC conversion data read + * is corresponding to previous ADC conversion start, independently + * of delay during which ADC was idle. + * Therefore, the ADC conversion data may be outdated: does not + * correspond to the current voltage level on the selected + * ADC channel. + * @rmtoll CR2 DELS LL_ADC_SetLowPowerModeAutoWait + * @param ADCx ADC instance + * @param LowPowerModeAutoWait This parameter can be one of the following values: + * @arg @ref LL_ADC_LP_AUTOWAIT_NONE + * @arg @ref LL_ADC_LP_AUTOWAIT + * @arg @ref LL_ADC_LP_AUTOWAIT_7_APBCLOCKCYCLES + * @arg @ref LL_ADC_LP_AUTOWAIT_15_APBCLOCKCYCLES + * @arg @ref LL_ADC_LP_AUTOWAIT_31_APBCLOCKCYCLES + * @arg @ref LL_ADC_LP_AUTOWAIT_63_APBCLOCKCYCLES + * @arg @ref LL_ADC_LP_AUTOWAIT_127_APBCLOCKCYCLES + * @arg @ref LL_ADC_LP_AUTOWAIT_255_APBCLOCKCYCLES + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetLowPowerModeAutoWait(ADC_TypeDef *ADCx, uint32_t LowPowerModeAutoWait) +{ + MODIFY_REG(ADCx->CR2, ADC_CR2_DELS, LowPowerModeAutoWait); +} + +/** + * @brief Get ADC low power mode auto wait. + * @note Description of ADC low power modes: + * - ADC low power mode "auto wait": Dynamic low power mode, + * ADC conversions occurrences are limited to the minimum necessary + * in order to reduce power consumption. + * New ADC conversion starts only when the previous + * unitary conversion data (for ADC group regular) + * or previous sequence conversions data (for ADC group injected) + * has been retrieved by user software. + * In the meantime, ADC remains idle: does not performs any + * other conversion. + * This mode allows to automatically adapt the ADC conversions + * triggers to the speed of the software that reads the data. + * Moreover, this avoids risk of overrun for low frequency + * applications. + * How to use this low power mode: + * - Do not use with interruption or DMA since these modes + * have to clear immediately the EOC flag to free the + * IRQ vector sequencer. + * - Do use with polling: 1. Start conversion, + * 2. Later on, when conversion data is needed: poll for end of + * conversion to ensure that conversion is completed and + * retrieve ADC conversion data. This will trig another + * ADC conversion start. + * - ADC low power mode "auto power-off": + * refer to function @ref LL_ADC_SetLowPowerModeAutoPowerOff(). + * @note With ADC low power mode "auto wait", the ADC conversion data read + * is corresponding to previous ADC conversion start, independently + * of delay during which ADC was idle. + * Therefore, the ADC conversion data may be outdated: does not + * correspond to the current voltage level on the selected + * ADC channel. + * @rmtoll CR2 DELS LL_ADC_GetLowPowerModeAutoWait + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_LP_AUTOWAIT_NONE + * @arg @ref LL_ADC_LP_AUTOWAIT + * @arg @ref LL_ADC_LP_AUTOWAIT_7_APBCLOCKCYCLES + * @arg @ref LL_ADC_LP_AUTOWAIT_15_APBCLOCKCYCLES + * @arg @ref LL_ADC_LP_AUTOWAIT_31_APBCLOCKCYCLES + * @arg @ref LL_ADC_LP_AUTOWAIT_63_APBCLOCKCYCLES + * @arg @ref LL_ADC_LP_AUTOWAIT_127_APBCLOCKCYCLES + * @arg @ref LL_ADC_LP_AUTOWAIT_255_APBCLOCKCYCLES + */ +__STATIC_INLINE uint32_t LL_ADC_GetLowPowerModeAutoWait(ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CR2, ADC_CR2_DELS)); +} + +/** + * @brief Set ADC low power mode auto power-off. + * @note Description of ADC low power modes: + * - ADC low power mode "auto wait": + * refer to function @ref LL_ADC_SetLowPowerModeAutoWait(). + * - ADC low power mode "auto power-off": + * the ADC automatically powers-off after a conversion and + * automatically wakes up when a new conversion is triggered + * (with startup time between trigger and start of sampling). + * This feature can be combined with low power mode "auto wait". + * @rmtoll CR1 PDI LL_ADC_GetLowPowerModeAutoPowerOff\n + * CR1 PDD LL_ADC_GetLowPowerModeAutoPowerOff + * @param ADCx ADC instance + * @param LowPowerModeAutoPowerOff This parameter can be one of the following values: + * @arg @ref LL_ADC_LP_AUTOPOWEROFF_NONE + * @arg @ref LL_ADC_LP_AUTOPOWEROFF_IDLE_PHASE + * @arg @ref LL_ADC_LP_AUTOPOWEROFF_AUTOWAIT_PHASE + * @arg @ref LL_ADC_LP_AUTOPOWEROFF_IDLE_AUTOWAIT_PHASES + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetLowPowerModeAutoPowerOff(ADC_TypeDef *ADCx, uint32_t LowPowerModeAutoPowerOff) +{ + MODIFY_REG(ADCx->CR1, (ADC_CR1_PDI | ADC_CR1_PDD), LowPowerModeAutoPowerOff); +} + +/** + * @brief Get ADC low power mode auto power-off. + * @note Description of ADC low power modes: + * - ADC low power mode "auto wait": + * refer to function @ref LL_ADC_SetLowPowerModeAutoWait(). + * - ADC low power mode "auto power-off": + * the ADC automatically powers-off after a conversion and + * automatically wakes up when a new conversion is triggered + * (with startup time between trigger and start of sampling). + * This feature can be combined with low power mode "auto wait". + * @rmtoll CR1 PDI LL_ADC_GetLowPowerModeAutoPowerOff\n + * CR1 PDD LL_ADC_GetLowPowerModeAutoPowerOff + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_LP_AUTOPOWEROFF_NONE + * @arg @ref LL_ADC_LP_AUTOPOWEROFF_IDLE_PHASE + * @arg @ref LL_ADC_LP_AUTOPOWEROFF_AUTOWAIT_PHASE + * @arg @ref LL_ADC_LP_AUTOPOWEROFF_IDLE_AUTOWAIT_PHASES + */ +__STATIC_INLINE uint32_t LL_ADC_GetLowPowerModeAutoPowerOff(ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CR1, (ADC_CR1_PDI | ADC_CR1_PDD))); +} + +/** + * @brief Set ADC sequencers scan mode, for all ADC groups + * (group regular, group injected). + * @note According to sequencers scan mode : + * - If disabled: ADC conversion is performed in unitary conversion + * mode (one channel converted, that defined in rank 1). + * Configuration of sequencers of all ADC groups + * (sequencer scan length, ...) is discarded: equivalent to + * scan length of 1 rank. + * - If enabled: ADC conversions are performed in sequence conversions + * mode, according to configuration of sequencers of + * each ADC group (sequencer scan length, ...). + * Refer to function @ref LL_ADC_REG_SetSequencerLength() + * and to function @ref LL_ADC_INJ_SetSequencerLength(). + * @note On this STM32 serie, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on either groups regular or injected. + * @rmtoll CR1 SCAN LL_ADC_SetSequencersScanMode + * @param ADCx ADC instance + * @param ScanMode This parameter can be one of the following values: + * @arg @ref LL_ADC_SEQ_SCAN_DISABLE + * @arg @ref LL_ADC_SEQ_SCAN_ENABLE + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetSequencersScanMode(ADC_TypeDef *ADCx, uint32_t ScanMode) +{ + MODIFY_REG(ADCx->CR1, ADC_CR1_SCAN, ScanMode); +} + +/** + * @brief Get ADC sequencers scan mode, for all ADC groups + * (group regular, group injected). + * @note According to sequencers scan mode : + * - If disabled: ADC conversion is performed in unitary conversion + * mode (one channel converted, that defined in rank 1). + * Configuration of sequencers of all ADC groups + * (sequencer scan length, ...) is discarded: equivalent to + * scan length of 1 rank. + * - If enabled: ADC conversions are performed in sequence conversions + * mode, according to configuration of sequencers of + * each ADC group (sequencer scan length, ...). + * Refer to function @ref LL_ADC_REG_SetSequencerLength() + * and to function @ref LL_ADC_INJ_SetSequencerLength(). + * @rmtoll CR1 SCAN LL_ADC_GetSequencersScanMode + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_SEQ_SCAN_DISABLE + * @arg @ref LL_ADC_SEQ_SCAN_ENABLE + */ +__STATIC_INLINE uint32_t LL_ADC_GetSequencersScanMode(ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CR1, ADC_CR1_SCAN)); +} + +#if defined(ADC_CR2_CFG) +/** + * @brief Set ADC channels bank. + * @note Bank selected applies to ADC scope, on all channels + * (independently of channel mapped on ADC group regular + * or group injected). + * @note Banks availability depends on devices categories. + * @note On this STM32 serie, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on either groups regular or injected. + * @rmtoll CR2 ADC_CFG LL_ADC_SetChannelsBank + * @param ADCx ADC instance + * @param ChannelsBank This parameter can be one of the following values: + * @arg @ref LL_ADC_CHANNELS_BANK_A + * @arg @ref LL_ADC_CHANNELS_BANK_B + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetChannelsBank(ADC_TypeDef *ADCx, uint32_t ChannelsBank) +{ + MODIFY_REG(ADCx->CR2, ADC_CR2_CFG, ChannelsBank); +} + +/** + * @brief Get ADC channels bank. + * @note Bank selected applies to ADC scope, on all channels + * (independently of channel mapped on ADC group regular + * or group injected). + * @note Banks availability depends on devices categories. + * @rmtoll CR2 ADC_CFG LL_ADC_GetChannelsBank + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_CHANNELS_BANK_A + * @arg @ref LL_ADC_CHANNELS_BANK_B + */ +__STATIC_INLINE uint32_t LL_ADC_GetChannelsBank(ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CR2, ADC_CR2_CFG)); +} +#endif + +/** + * @} + */ + +/** @defgroup ADC_LL_EF_Configuration_ADC_Group_Regular Configuration of ADC hierarchical scope: group regular + * @{ + */ + +/** + * @brief Set ADC group regular conversion trigger source: + * internal (SW start) or from external IP (timer event, + * external interrupt line). + * @note On this STM32 serie, setting of external trigger edge is performed + * using function @ref LL_ADC_REG_StartConversionExtTrig(). + * @note Availability of parameters of trigger sources from timer + * depends on timers availability on the selected device. + * @rmtoll CR2 EXTSEL LL_ADC_REG_SetTriggerSource\n + * CR2 EXTEN LL_ADC_REG_SetTriggerSource + * @param ADCx ADC instance + * @param TriggerSource This parameter can be one of the following values: + * @arg @ref LL_ADC_REG_TRIG_SOFTWARE + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM2_TRGO + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM2_CH3 + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM3_TRGO + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM2_CH2 + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM3_CH1 + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM3_CH3 + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM4_TRGO + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM4_CH4 + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM6_TRGO + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM9_CH2 + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM9_TRGO + * @arg @ref LL_ADC_REG_TRIG_EXT_EXTI_LINE11 + * @retval None + */ +__STATIC_INLINE void LL_ADC_REG_SetTriggerSource(ADC_TypeDef *ADCx, uint32_t TriggerSource) +{ +/* Note: On this STM32 serie, ADC group regular external trigger edge */ +/* is used to perform a ADC conversion start. */ +/* This function does not set external trigger edge. */ +/* This feature is set using function */ +/* @ref LL_ADC_REG_StartConversionExtTrig(). */ + MODIFY_REG(ADCx->CR2, ADC_CR2_EXTSEL, (TriggerSource & ADC_CR2_EXTSEL)); +} + +/** + * @brief Get ADC group regular conversion trigger source: + * internal (SW start) or from external IP (timer event, + * external interrupt line). + * @note To determine whether group regular trigger source is + * internal (SW start) or external, without detail + * of which peripheral is selected as external trigger, + * (equivalent to + * "if(LL_ADC_REG_GetTriggerSource(ADC1) == LL_ADC_REG_TRIG_SOFTWARE)") + * use function @ref LL_ADC_REG_IsTriggerSourceSWStart. + * @note Availability of parameters of trigger sources from timer + * depends on timers availability on the selected device. + * @rmtoll CR2 EXTSEL LL_ADC_REG_GetTriggerSource\n + * CR2 EXTEN LL_ADC_REG_GetTriggerSource + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_REG_TRIG_SOFTWARE + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM2_TRGO + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM2_CH3 + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM3_TRGO + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM2_CH2 + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM3_CH1 + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM3_CH3 + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM4_TRGO + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM4_CH4 + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM6_TRGO + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM9_CH2 + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM9_TRGO + * @arg @ref LL_ADC_REG_TRIG_EXT_EXTI_LINE11 + */ +__STATIC_INLINE uint32_t LL_ADC_REG_GetTriggerSource(ADC_TypeDef *ADCx) +{ + register uint32_t TriggerSource = READ_BIT(ADCx->CR2, ADC_CR2_EXTSEL | ADC_CR2_EXTEN); + + /* Value for shift of {0; 4; 8; 12} depending on value of bitfield */ + /* corresponding to ADC_CR2_EXTEN {0; 1; 2; 3}. */ + register uint32_t ShiftExten = ((TriggerSource & ADC_CR2_EXTEN) >> (ADC_REG_TRIG_EXTEN_BITOFFSET_POS - 2U)); + + /* Set bitfield corresponding to ADC_CR2_EXTEN and ADC_CR2_EXTSEL */ + /* to match with triggers literals definition. */ + return ((TriggerSource + & (ADC_REG_TRIG_SOURCE_MASK << ShiftExten) & ADC_CR2_EXTSEL) + | ((ADC_REG_TRIG_EDGE_MASK << ShiftExten) & ADC_CR2_EXTEN) + ); +} + +/** + * @brief Get ADC group regular conversion trigger source internal (SW start) + or external. + * @note In case of group regular trigger source set to external trigger, + * to determine which peripheral is selected as external trigger, + * use function @ref LL_ADC_REG_GetTriggerSource(). + * @rmtoll CR2 EXTEN LL_ADC_REG_IsTriggerSourceSWStart + * @param ADCx ADC instance + * @retval Value "0" if trigger source external trigger + * Value "1" if trigger source SW start. + */ +__STATIC_INLINE uint32_t LL_ADC_REG_IsTriggerSourceSWStart(ADC_TypeDef *ADCx) +{ + return (READ_BIT(ADCx->CR2, ADC_CR2_EXTEN) == (LL_ADC_REG_TRIG_SOFTWARE & ADC_CR2_EXTEN)); +} + +/** + * @brief Get ADC group regular conversion trigger polarity. + * @note Applicable only for trigger source set to external trigger. + * @note On this STM32 serie, setting of external trigger edge is performed + * using function @ref LL_ADC_REG_StartConversionExtTrig(). + * @rmtoll CR2 EXTEN LL_ADC_REG_GetTriggerEdge + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_REG_TRIG_EXT_RISING + * @arg @ref LL_ADC_REG_TRIG_EXT_FALLING + * @arg @ref LL_ADC_REG_TRIG_EXT_RISINGFALLING + */ +__STATIC_INLINE uint32_t LL_ADC_REG_GetTriggerEdge(ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CR2, ADC_CR2_EXTEN)); +} + + +/** + * @brief Set ADC group regular sequencer length and scan direction. + * @note Description of ADC group regular sequencer features: + * - For devices with sequencer fully configurable + * (function "LL_ADC_REG_SetSequencerRanks()" available): + * sequencer length and each rank affectation to a channel + * are configurable. + * This function performs configuration of: + * - Sequence length: Number of ranks in the scan sequence. + * - Sequence direction: Unless specified in parameters, sequencer + * scan direction is forward (from rank 1 to rank n). + * Sequencer ranks are selected using + * function "LL_ADC_REG_SetSequencerRanks()". + * - For devices with sequencer not fully configurable + * (function "LL_ADC_REG_SetSequencerChannels()" available): + * sequencer length and each rank affectation to a channel + * are defined by channel number. + * This function performs configuration of: + * - Sequence length: Number of ranks in the scan sequence is + * defined by number of channels set in the sequence, + * rank of each channel is fixed by channel HW number. + * (channel 0 fixed on rank 0, channel 1 fixed on rank1, ...). + * - Sequence direction: Unless specified in parameters, sequencer + * scan direction is forward (from lowest channel number to + * highest channel number). + * Sequencer ranks are selected using + * function "LL_ADC_REG_SetSequencerChannels()". + * @note On this STM32 serie, group regular sequencer configuration + * is conditioned to ADC instance sequencer mode. + * If ADC instance sequencer mode is disabled, sequencers of + * all groups (group regular, group injected) can be configured + * but their execution is disabled (limited to rank 1). + * Refer to function @ref LL_ADC_SetSequencersScanMode(). + * @note Sequencer disabled is equivalent to sequencer of 1 rank: + * ADC conversion on only 1 channel. + * @rmtoll SQR1 L LL_ADC_REG_SetSequencerLength + * @param ADCx ADC instance + * @param SequencerNbRanks This parameter can be one of the following values: + * @arg @ref LL_ADC_REG_SEQ_SCAN_DISABLE + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_2RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_3RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_4RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_5RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_6RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_7RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_8RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_9RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_10RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_11RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_12RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_13RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_14RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_15RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_16RANKS + * @retval None + */ +__STATIC_INLINE void LL_ADC_REG_SetSequencerLength(ADC_TypeDef *ADCx, uint32_t SequencerNbRanks) +{ + MODIFY_REG(ADCx->SQR1, ADC_SQR1_L, SequencerNbRanks); +} + +/** + * @brief Get ADC group regular sequencer length and scan direction. + * @note Description of ADC group regular sequencer features: + * - For devices with sequencer fully configurable + * (function "LL_ADC_REG_SetSequencerRanks()" available): + * sequencer length and each rank affectation to a channel + * are configurable. + * This function retrieves: + * - Sequence length: Number of ranks in the scan sequence. + * - Sequence direction: Unless specified in parameters, sequencer + * scan direction is forward (from rank 1 to rank n). + * Sequencer ranks are selected using + * function "LL_ADC_REG_SetSequencerRanks()". + * - For devices with sequencer not fully configurable + * (function "LL_ADC_REG_SetSequencerChannels()" available): + * sequencer length and each rank affectation to a channel + * are defined by channel number. + * This function retrieves: + * - Sequence length: Number of ranks in the scan sequence is + * defined by number of channels set in the sequence, + * rank of each channel is fixed by channel HW number. + * (channel 0 fixed on rank 0, channel 1 fixed on rank1, ...). + * - Sequence direction: Unless specified in parameters, sequencer + * scan direction is forward (from lowest channel number to + * highest channel number). + * Sequencer ranks are selected using + * function "LL_ADC_REG_SetSequencerChannels()". + * @note On this STM32 serie, group regular sequencer configuration + * is conditioned to ADC instance sequencer mode. + * If ADC instance sequencer mode is disabled, sequencers of + * all groups (group regular, group injected) can be configured + * but their execution is disabled (limited to rank 1). + * Refer to function @ref LL_ADC_SetSequencersScanMode(). + * @note Sequencer disabled is equivalent to sequencer of 1 rank: + * ADC conversion on only 1 channel. + * @rmtoll SQR1 L LL_ADC_REG_SetSequencerLength + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_REG_SEQ_SCAN_DISABLE + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_2RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_3RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_4RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_5RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_6RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_7RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_8RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_9RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_10RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_11RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_12RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_13RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_14RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_15RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_16RANKS + */ +__STATIC_INLINE uint32_t LL_ADC_REG_GetSequencerLength(ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->SQR1, ADC_SQR1_L)); +} + +/** + * @brief Set ADC group regular sequencer discontinuous mode: + * sequence subdivided and scan conversions interrupted every selected + * number of ranks. + * @note It is not possible to enable both ADC group regular + * continuous mode and sequencer discontinuous mode. + * @note It is not possible to enable both ADC auto-injected mode + * and ADC group regular sequencer discontinuous mode. + * @rmtoll CR1 DISCEN LL_ADC_REG_SetSequencerDiscont\n + * CR1 DISCNUM LL_ADC_REG_SetSequencerDiscont + * @param ADCx ADC instance + * @param SeqDiscont This parameter can be one of the following values: + * @arg @ref LL_ADC_REG_SEQ_DISCONT_DISABLE + * @arg @ref LL_ADC_REG_SEQ_DISCONT_1RANK + * @arg @ref LL_ADC_REG_SEQ_DISCONT_2RANKS + * @arg @ref LL_ADC_REG_SEQ_DISCONT_3RANKS + * @arg @ref LL_ADC_REG_SEQ_DISCONT_4RANKS + * @arg @ref LL_ADC_REG_SEQ_DISCONT_5RANKS + * @arg @ref LL_ADC_REG_SEQ_DISCONT_6RANKS + * @arg @ref LL_ADC_REG_SEQ_DISCONT_7RANKS + * @arg @ref LL_ADC_REG_SEQ_DISCONT_8RANKS + * @retval None + */ +__STATIC_INLINE void LL_ADC_REG_SetSequencerDiscont(ADC_TypeDef *ADCx, uint32_t SeqDiscont) +{ + MODIFY_REG(ADCx->CR1, ADC_CR1_DISCEN | ADC_CR1_DISCNUM, SeqDiscont); +} + +/** + * @brief Get ADC group regular sequencer discontinuous mode: + * sequence subdivided and scan conversions interrupted every selected + * number of ranks. + * @rmtoll CR1 DISCEN LL_ADC_REG_GetSequencerDiscont\n + * CR1 DISCNUM LL_ADC_REG_GetSequencerDiscont + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_REG_SEQ_DISCONT_DISABLE + * @arg @ref LL_ADC_REG_SEQ_DISCONT_1RANK + * @arg @ref LL_ADC_REG_SEQ_DISCONT_2RANKS + * @arg @ref LL_ADC_REG_SEQ_DISCONT_3RANKS + * @arg @ref LL_ADC_REG_SEQ_DISCONT_4RANKS + * @arg @ref LL_ADC_REG_SEQ_DISCONT_5RANKS + * @arg @ref LL_ADC_REG_SEQ_DISCONT_6RANKS + * @arg @ref LL_ADC_REG_SEQ_DISCONT_7RANKS + * @arg @ref LL_ADC_REG_SEQ_DISCONT_8RANKS + */ +__STATIC_INLINE uint32_t LL_ADC_REG_GetSequencerDiscont(ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CR1, ADC_CR1_DISCEN | ADC_CR1_DISCNUM)); +} + +/** + * @brief Set ADC group regular sequence: channel on the selected + * scan sequence rank. + * @note This function performs configuration of: + * - Channels ordering into each rank of scan sequence: + * whatever channel can be placed into whatever rank. + * @note On this STM32 serie, ADC group regular sequencer is + * fully configurable: sequencer length and each rank + * affectation to a channel are configurable. + * Refer to description of function @ref LL_ADC_REG_SetSequencerLength(). + * @note Depending on devices and packages, some channels may not be available. + * Refer to device datasheet for channels availability. + * @note On this STM32 serie, to measure internal channels (VrefInt, + * TempSensor, ...), measurement paths to internal channels must be + * enabled separately. + * This can be done using function @ref LL_ADC_SetCommonPathInternalCh(). + * @rmtoll SQR5 SQ1 LL_ADC_REG_SetSequencerRanks\n + * SQR5 SQ2 LL_ADC_REG_SetSequencerRanks\n + * SQR5 SQ3 LL_ADC_REG_SetSequencerRanks\n + * SQR5 SQ4 LL_ADC_REG_SetSequencerRanks\n + * SQR5 SQ5 LL_ADC_REG_SetSequencerRanks\n + * SQR5 SQ6 LL_ADC_REG_SetSequencerRanks\n + * SQR4 SQ7 LL_ADC_REG_SetSequencerRanks\n + * SQR4 SQ8 LL_ADC_REG_SetSequencerRanks\n + * SQR4 SQ9 LL_ADC_REG_SetSequencerRanks\n + * SQR4 SQ10 LL_ADC_REG_SetSequencerRanks\n + * SQR4 SQ11 LL_ADC_REG_SetSequencerRanks\n + * SQR4 SQ12 LL_ADC_REG_SetSequencerRanks\n + * SQR3 SQ13 LL_ADC_REG_SetSequencerRanks\n + * SQR3 SQ14 LL_ADC_REG_SetSequencerRanks\n + * SQR3 SQ15 LL_ADC_REG_SetSequencerRanks\n + * SQR3 SQ16 LL_ADC_REG_SetSequencerRanks\n + * SQR3 SQ17 LL_ADC_REG_SetSequencerRanks\n + * SQR3 SQ18 LL_ADC_REG_SetSequencerRanks\n + * SQR2 SQ19 LL_ADC_REG_SetSequencerRanks\n + * SQR2 SQ20 LL_ADC_REG_SetSequencerRanks\n + * SQR2 SQ21 LL_ADC_REG_SetSequencerRanks\n + * SQR2 SQ22 LL_ADC_REG_SetSequencerRanks\n + * SQR2 SQ23 LL_ADC_REG_SetSequencerRanks\n + * SQR2 SQ24 LL_ADC_REG_SetSequencerRanks\n + * SQR1 SQ25 LL_ADC_REG_SetSequencerRanks\n + * SQR1 SQ26 LL_ADC_REG_SetSequencerRanks\n + * SQR1 SQ27 LL_ADC_REG_SetSequencerRanks\n + * SQR1 SQ28 LL_ADC_REG_SetSequencerRanks + * @param ADCx ADC instance + * @param Rank This parameter can be one of the following values: + * @arg @ref LL_ADC_REG_RANK_1 + * @arg @ref LL_ADC_REG_RANK_2 + * @arg @ref LL_ADC_REG_RANK_3 + * @arg @ref LL_ADC_REG_RANK_4 + * @arg @ref LL_ADC_REG_RANK_5 + * @arg @ref LL_ADC_REG_RANK_6 + * @arg @ref LL_ADC_REG_RANK_7 + * @arg @ref LL_ADC_REG_RANK_8 + * @arg @ref LL_ADC_REG_RANK_9 + * @arg @ref LL_ADC_REG_RANK_10 + * @arg @ref LL_ADC_REG_RANK_11 + * @arg @ref LL_ADC_REG_RANK_12 + * @arg @ref LL_ADC_REG_RANK_13 + * @arg @ref LL_ADC_REG_RANK_14 + * @arg @ref LL_ADC_REG_RANK_15 + * @arg @ref LL_ADC_REG_RANK_16 + * @arg @ref LL_ADC_REG_RANK_17 + * @arg @ref LL_ADC_REG_RANK_18 + * @arg @ref LL_ADC_REG_RANK_19 + * @arg @ref LL_ADC_REG_RANK_20 + * @arg @ref LL_ADC_REG_RANK_21 + * @arg @ref LL_ADC_REG_RANK_22 + * @arg @ref LL_ADC_REG_RANK_23 + * @arg @ref LL_ADC_REG_RANK_24 + * @arg @ref LL_ADC_REG_RANK_25 + * @arg @ref LL_ADC_REG_RANK_26 + * @arg @ref LL_ADC_REG_RANK_27 + * @arg @ref LL_ADC_REG_RANK_28 (1) + * + * (1) On STM32L1, parameter not available on all devices: only on STM32L1 Cat.3, Cat.4 and Cat.5. + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_ADC_CHANNEL_0 (2) + * @arg @ref LL_ADC_CHANNEL_1 (2) + * @arg @ref LL_ADC_CHANNEL_2 (2) + * @arg @ref LL_ADC_CHANNEL_3 (2) + * @arg @ref LL_ADC_CHANNEL_4 (1) + * @arg @ref LL_ADC_CHANNEL_5 (1) + * @arg @ref LL_ADC_CHANNEL_6 (2) + * @arg @ref LL_ADC_CHANNEL_7 (2) + * @arg @ref LL_ADC_CHANNEL_8 (2) + * @arg @ref LL_ADC_CHANNEL_9 (2) + * @arg @ref LL_ADC_CHANNEL_10 (2) + * @arg @ref LL_ADC_CHANNEL_11 (2) + * @arg @ref LL_ADC_CHANNEL_12 (2) + * @arg @ref LL_ADC_CHANNEL_13 (3) + * @arg @ref LL_ADC_CHANNEL_14 (3) + * @arg @ref LL_ADC_CHANNEL_15 (3) + * @arg @ref LL_ADC_CHANNEL_16 (3) + * @arg @ref LL_ADC_CHANNEL_17 (3) + * @arg @ref LL_ADC_CHANNEL_18 (3) + * @arg @ref LL_ADC_CHANNEL_19 (3) + * @arg @ref LL_ADC_CHANNEL_20 (3) + * @arg @ref LL_ADC_CHANNEL_21 (3) + * @arg @ref LL_ADC_CHANNEL_22 (1) + * @arg @ref LL_ADC_CHANNEL_23 (1) + * @arg @ref LL_ADC_CHANNEL_24 (1) + * @arg @ref LL_ADC_CHANNEL_25 (1) + * @arg @ref LL_ADC_CHANNEL_26 (3) + * @arg @ref LL_ADC_CHANNEL_27 (3)(4) + * @arg @ref LL_ADC_CHANNEL_28 (3)(4) + * @arg @ref LL_ADC_CHANNEL_29 (3)(4) + * @arg @ref LL_ADC_CHANNEL_30 (3)(4) + * @arg @ref LL_ADC_CHANNEL_31 (3)(4) + * @arg @ref LL_ADC_CHANNEL_VREFINT (3) + * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR (3) + * @arg @ref LL_ADC_CHANNEL_VCOMP (3) + * @arg @ref LL_ADC_CHANNEL_VOPAMP1 (3)(5) + * @arg @ref LL_ADC_CHANNEL_VOPAMP2 (3)(5) + * @arg @ref LL_ADC_CHANNEL_VOPAMP3 (3)(5) + * + * (1) On STM32L1, connection via routing interface (RI) specificity: fast channel (channel routed directly to ADC switch matrix).\n + * (2) On STM32L1, for devices with feature 'channels banks' available: Channel different in bank A and bank B.\n + * (3) On STM32L1, for devices with feature 'channels banks' available: Channel common to both bank A and bank B.\n + * (4) On STM32L1, parameter not available on all devices: only on STM32L1 Cat.4 and Cat.5.\n + * (5) On STM32L1, parameter not available on all devices: OPAMP1 and OPAMP2 available only on STM32L1 Cat.3, Cat.4 and Cat.5, OPAMP3 available only on STM32L1 Cat.4 and Cat.5 + * @retval None + */ +__STATIC_INLINE void LL_ADC_REG_SetSequencerRanks(ADC_TypeDef *ADCx, uint32_t Rank, uint32_t Channel) +{ + /* Set bits with content of parameter "Channel" with bits position */ + /* in register and register position depending on parameter "Rank". */ + /* Parameters "Rank" and "Channel" are used with masks because containing */ + /* other bits reserved for other purpose. */ + register uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->SQR1, __ADC_MASK_SHIFT(Rank, ADC_REG_SQRX_REGOFFSET_MASK)); + + MODIFY_REG(*preg, + ADC_CHANNEL_ID_NUMBER_MASK << (Rank & ADC_REG_RANK_ID_SQRX_MASK), + (Channel & ADC_CHANNEL_ID_NUMBER_MASK) << (Rank & ADC_REG_RANK_ID_SQRX_MASK)); +} + +/** + * @brief Get ADC group regular sequence: channel on the selected + * scan sequence rank. + * @note On this STM32 serie, ADC group regular sequencer is + * fully configurable: sequencer length and each rank + * affectation to a channel are configurable. + * Refer to description of function @ref LL_ADC_REG_SetSequencerLength(). + * @note Depending on devices and packages, some channels may not be available. + * Refer to device datasheet for channels availability. + * @note Usage of the returned channel number: + * - To reinject this channel into another function LL_ADC_xxx: + * the returned channel number is only partly formatted on definition + * of literals LL_ADC_CHANNEL_x. Therefore, it has to be compared + * with parts of literals LL_ADC_CHANNEL_x or using + * helper macro @ref __LL_ADC_CHANNEL_TO_DECIMAL_NB(). + * Then the selected literal LL_ADC_CHANNEL_x can be used + * as parameter for another function. + * - To get the channel number in decimal format: + * process the returned value with the helper macro + * @ref __LL_ADC_CHANNEL_TO_DECIMAL_NB(). + * @rmtoll SQR5 SQ1 LL_ADC_REG_GetSequencerRanks\n + * SQR5 SQ2 LL_ADC_REG_GetSequencerRanks\n + * SQR5 SQ3 LL_ADC_REG_GetSequencerRanks\n + * SQR5 SQ4 LL_ADC_REG_GetSequencerRanks\n + * SQR5 SQ5 LL_ADC_REG_GetSequencerRanks\n + * SQR5 SQ6 LL_ADC_REG_GetSequencerRanks\n + * SQR4 SQ7 LL_ADC_REG_GetSequencerRanks\n + * SQR4 SQ8 LL_ADC_REG_GetSequencerRanks\n + * SQR4 SQ9 LL_ADC_REG_GetSequencerRanks\n + * SQR4 SQ10 LL_ADC_REG_GetSequencerRanks\n + * SQR4 SQ11 LL_ADC_REG_GetSequencerRanks\n + * SQR4 SQ12 LL_ADC_REG_GetSequencerRanks\n + * SQR3 SQ13 LL_ADC_REG_GetSequencerRanks\n + * SQR3 SQ14 LL_ADC_REG_GetSequencerRanks\n + * SQR3 SQ15 LL_ADC_REG_GetSequencerRanks\n + * SQR3 SQ16 LL_ADC_REG_GetSequencerRanks\n + * SQR3 SQ17 LL_ADC_REG_GetSequencerRanks\n + * SQR3 SQ18 LL_ADC_REG_GetSequencerRanks\n + * SQR2 SQ19 LL_ADC_REG_GetSequencerRanks\n + * SQR2 SQ20 LL_ADC_REG_GetSequencerRanks\n + * SQR2 SQ21 LL_ADC_REG_GetSequencerRanks\n + * SQR2 SQ22 LL_ADC_REG_GetSequencerRanks\n + * SQR2 SQ23 LL_ADC_REG_GetSequencerRanks\n + * SQR2 SQ24 LL_ADC_REG_GetSequencerRanks\n + * SQR1 SQ25 LL_ADC_REG_GetSequencerRanks\n + * SQR1 SQ26 LL_ADC_REG_GetSequencerRanks\n + * SQR1 SQ27 LL_ADC_REG_GetSequencerRanks\n + * SQR1 SQ28 LL_ADC_REG_GetSequencerRanks + * @param ADCx ADC instance + * @param Rank This parameter can be one of the following values: + * @arg @ref LL_ADC_REG_RANK_1 + * @arg @ref LL_ADC_REG_RANK_2 + * @arg @ref LL_ADC_REG_RANK_3 + * @arg @ref LL_ADC_REG_RANK_4 + * @arg @ref LL_ADC_REG_RANK_5 + * @arg @ref LL_ADC_REG_RANK_6 + * @arg @ref LL_ADC_REG_RANK_7 + * @arg @ref LL_ADC_REG_RANK_8 + * @arg @ref LL_ADC_REG_RANK_9 + * @arg @ref LL_ADC_REG_RANK_10 + * @arg @ref LL_ADC_REG_RANK_11 + * @arg @ref LL_ADC_REG_RANK_12 + * @arg @ref LL_ADC_REG_RANK_13 + * @arg @ref LL_ADC_REG_RANK_14 + * @arg @ref LL_ADC_REG_RANK_15 + * @arg @ref LL_ADC_REG_RANK_16 + * @arg @ref LL_ADC_REG_RANK_17 + * @arg @ref LL_ADC_REG_RANK_18 + * @arg @ref LL_ADC_REG_RANK_19 + * @arg @ref LL_ADC_REG_RANK_20 + * @arg @ref LL_ADC_REG_RANK_21 + * @arg @ref LL_ADC_REG_RANK_22 + * @arg @ref LL_ADC_REG_RANK_23 + * @arg @ref LL_ADC_REG_RANK_24 + * @arg @ref LL_ADC_REG_RANK_25 + * @arg @ref LL_ADC_REG_RANK_26 + * @arg @ref LL_ADC_REG_RANK_27 + * @arg @ref LL_ADC_REG_RANK_28 (1) + * + * (1) On STM32L1, parameter not available on all devices: only on STM32L1 Cat.3, Cat.4 and Cat.5. + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_CHANNEL_0 (2) + * @arg @ref LL_ADC_CHANNEL_1 (2) + * @arg @ref LL_ADC_CHANNEL_2 (2) + * @arg @ref LL_ADC_CHANNEL_3 (2) + * @arg @ref LL_ADC_CHANNEL_4 (1) + * @arg @ref LL_ADC_CHANNEL_5 (1) + * @arg @ref LL_ADC_CHANNEL_6 (2) + * @arg @ref LL_ADC_CHANNEL_7 (2) + * @arg @ref LL_ADC_CHANNEL_8 (2) + * @arg @ref LL_ADC_CHANNEL_9 (2) + * @arg @ref LL_ADC_CHANNEL_10 (2) + * @arg @ref LL_ADC_CHANNEL_11 (2) + * @arg @ref LL_ADC_CHANNEL_12 (2) + * @arg @ref LL_ADC_CHANNEL_13 (3) + * @arg @ref LL_ADC_CHANNEL_14 (3) + * @arg @ref LL_ADC_CHANNEL_15 (3) + * @arg @ref LL_ADC_CHANNEL_16 (3) + * @arg @ref LL_ADC_CHANNEL_17 (3) + * @arg @ref LL_ADC_CHANNEL_18 (3) + * @arg @ref LL_ADC_CHANNEL_19 (3) + * @arg @ref LL_ADC_CHANNEL_20 (3) + * @arg @ref LL_ADC_CHANNEL_21 (3) + * @arg @ref LL_ADC_CHANNEL_22 (1) + * @arg @ref LL_ADC_CHANNEL_23 (1) + * @arg @ref LL_ADC_CHANNEL_24 (1) + * @arg @ref LL_ADC_CHANNEL_25 (1) + * @arg @ref LL_ADC_CHANNEL_26 (3) + * @arg @ref LL_ADC_CHANNEL_27 (3)(4) + * @arg @ref LL_ADC_CHANNEL_28 (3)(4) + * @arg @ref LL_ADC_CHANNEL_29 (3)(4) + * @arg @ref LL_ADC_CHANNEL_30 (3)(4) + * @arg @ref LL_ADC_CHANNEL_31 (3)(4) + * @arg @ref LL_ADC_CHANNEL_VREFINT (3)(6) + * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR (3)(6) + * @arg @ref LL_ADC_CHANNEL_VCOMP (3)(6) + * @arg @ref LL_ADC_CHANNEL_VOPAMP1 (3)(5) + * @arg @ref LL_ADC_CHANNEL_VOPAMP2 (3)(5) + * @arg @ref LL_ADC_CHANNEL_VOPAMP3 (3)(5) + * + * (1) On STM32L1, connection via routing interface (RI) specificity: fast channel (channel routed directly to ADC switch matrix).\n + * (2) On STM32L1, for devices with feature 'channels banks' available: Channel different in bank A and bank B.\n + * (3) On STM32L1, for devices with feature 'channels banks' available: Channel common to both bank A and bank B.\n + * (4) On STM32L1, parameter not available on all devices: only on STM32L1 Cat.4 and Cat.5.\n + * (5) On STM32L1, parameter not available on all devices: OPAMP1 and OPAMP2 available only on STM32L1 Cat.3, Cat.4 and Cat.5, OPAMP3 available only on STM32L1 Cat.4 and Cat.5.\n + * (6) For ADC channel read back from ADC register, + * comparison with internal channel parameter to be done + * using helper macro @ref __LL_ADC_CHANNEL_INTERNAL_TO_EXTERNAL(). + */ +__STATIC_INLINE uint32_t LL_ADC_REG_GetSequencerRanks(ADC_TypeDef *ADCx, uint32_t Rank) +{ + register uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->SQR1, __ADC_MASK_SHIFT(Rank, ADC_REG_SQRX_REGOFFSET_MASK)); + + return (uint32_t) (READ_BIT(*preg, + ADC_CHANNEL_ID_NUMBER_MASK << (Rank & ADC_REG_RANK_ID_SQRX_MASK)) + >> (Rank & ADC_REG_RANK_ID_SQRX_MASK) + ); +} + +/** + * @brief Set ADC continuous conversion mode on ADC group regular. + * @note Description of ADC continuous conversion mode: + * - single mode: one conversion per trigger + * - continuous mode: after the first trigger, following + * conversions launched successively automatically. + * @note It is not possible to enable both ADC group regular + * continuous mode and sequencer discontinuous mode. + * @rmtoll CR2 CONT LL_ADC_REG_SetContinuousMode + * @param ADCx ADC instance + * @param Continuous This parameter can be one of the following values: + * @arg @ref LL_ADC_REG_CONV_SINGLE + * @arg @ref LL_ADC_REG_CONV_CONTINUOUS + * @retval None + */ +__STATIC_INLINE void LL_ADC_REG_SetContinuousMode(ADC_TypeDef *ADCx, uint32_t Continuous) +{ + MODIFY_REG(ADCx->CR2, ADC_CR2_CONT, Continuous); +} + +/** + * @brief Get ADC continuous conversion mode on ADC group regular. + * @note Description of ADC continuous conversion mode: + * - single mode: one conversion per trigger + * - continuous mode: after the first trigger, following + * conversions launched successively automatically. + * @rmtoll CR2 CONT LL_ADC_REG_GetContinuousMode + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_REG_CONV_SINGLE + * @arg @ref LL_ADC_REG_CONV_CONTINUOUS + */ +__STATIC_INLINE uint32_t LL_ADC_REG_GetContinuousMode(ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CR2, ADC_CR2_CONT)); +} + +/** + * @brief Set ADC group regular conversion data transfer: no transfer or + * transfer by DMA, and DMA requests mode. + * @note If transfer by DMA selected, specifies the DMA requests + * mode: + * - Limited mode (One shot mode): DMA transfer requests are stopped + * when number of DMA data transfers (number of + * ADC conversions) is reached. + * This ADC mode is intended to be used with DMA mode non-circular. + * - Unlimited mode: DMA transfer requests are unlimited, + * whatever number of DMA data transfers (number of + * ADC conversions). + * This ADC mode is intended to be used with DMA mode circular. + * @note If ADC DMA requests mode is set to unlimited and DMA is set to + * mode non-circular: + * when DMA transfers size will be reached, DMA will stop transfers of + * ADC conversions data ADC will raise an overrun error + * (overrun flag and interruption if enabled). + * @note To configure DMA source address (peripheral address), + * use function @ref LL_ADC_DMA_GetRegAddr(). + * @rmtoll CR2 DMA LL_ADC_REG_SetDMATransfer\n + * CR2 DDS LL_ADC_REG_SetDMATransfer + * @param ADCx ADC instance + * @param DMATransfer This parameter can be one of the following values: + * @arg @ref LL_ADC_REG_DMA_TRANSFER_NONE + * @arg @ref LL_ADC_REG_DMA_TRANSFER_LIMITED + * @arg @ref LL_ADC_REG_DMA_TRANSFER_UNLIMITED + * @retval None + */ +__STATIC_INLINE void LL_ADC_REG_SetDMATransfer(ADC_TypeDef *ADCx, uint32_t DMATransfer) +{ + MODIFY_REG(ADCx->CR2, ADC_CR2_DMA | ADC_CR2_DDS, DMATransfer); +} + +/** + * @brief Get ADC group regular conversion data transfer: no transfer or + * transfer by DMA, and DMA requests mode. + * @note If transfer by DMA selected, specifies the DMA requests + * mode: + * - Limited mode (One shot mode): DMA transfer requests are stopped + * when number of DMA data transfers (number of + * ADC conversions) is reached. + * This ADC mode is intended to be used with DMA mode non-circular. + * - Unlimited mode: DMA transfer requests are unlimited, + * whatever number of DMA data transfers (number of + * ADC conversions). + * This ADC mode is intended to be used with DMA mode circular. + * @note If ADC DMA requests mode is set to unlimited and DMA is set to + * mode non-circular: + * when DMA transfers size will be reached, DMA will stop transfers of + * ADC conversions data ADC will raise an overrun error + * (overrun flag and interruption if enabled). + * @note To configure DMA source address (peripheral address), + * use function @ref LL_ADC_DMA_GetRegAddr(). + * @rmtoll CR2 DMA LL_ADC_REG_GetDMATransfer\n + * CR2 DDS LL_ADC_REG_GetDMATransfer + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_REG_DMA_TRANSFER_NONE + * @arg @ref LL_ADC_REG_DMA_TRANSFER_LIMITED + * @arg @ref LL_ADC_REG_DMA_TRANSFER_UNLIMITED + */ +__STATIC_INLINE uint32_t LL_ADC_REG_GetDMATransfer(ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CR2, ADC_CR2_DMA | ADC_CR2_DDS)); +} + +/** + * @brief Specify which ADC flag between EOC (end of unitary conversion) + * or EOS (end of sequence conversions) is used to indicate + * the end of conversion. + * @note This feature is aimed to be set when using ADC with + * programming model by polling or interruption + * (programming model by DMA usually uses DMA interruptions + * to indicate end of conversion and data transfer). + * @note For ADC group injected, end of conversion (flag&IT) is raised + * only at the end of the sequence. + * @rmtoll CR2 EOCS LL_ADC_REG_SetFlagEndOfConversion + * @param ADCx ADC instance + * @param EocSelection This parameter can be one of the following values: + * @arg @ref LL_ADC_REG_FLAG_EOC_SEQUENCE_CONV + * @arg @ref LL_ADC_REG_FLAG_EOC_UNITARY_CONV + * @retval None + */ +__STATIC_INLINE void LL_ADC_REG_SetFlagEndOfConversion(ADC_TypeDef *ADCx, uint32_t EocSelection) +{ + MODIFY_REG(ADCx->CR2, ADC_CR2_EOCS, EocSelection); +} + +/** + * @brief Get which ADC flag between EOC (end of unitary conversion) + * or EOS (end of sequence conversions) is used to indicate + * the end of conversion. + * @rmtoll CR2 EOCS LL_ADC_REG_GetFlagEndOfConversion + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_REG_FLAG_EOC_SEQUENCE_CONV + * @arg @ref LL_ADC_REG_FLAG_EOC_UNITARY_CONV + */ +__STATIC_INLINE uint32_t LL_ADC_REG_GetFlagEndOfConversion(ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CR2, ADC_CR2_EOCS)); +} + +/** + * @} + */ + +/** @defgroup ADC_LL_EF_Configuration_ADC_Group_Injected Configuration of ADC hierarchical scope: group injected + * @{ + */ + +/** + * @brief Set ADC group injected conversion trigger source: + * internal (SW start) or from external IP (timer event, + * external interrupt line). + * @note On this STM32 serie, setting of external trigger edge is performed + * using function @ref LL_ADC_INJ_StartConversionExtTrig(). + * @note Availability of parameters of trigger sources from timer + * depends on timers availability on the selected device. + * @rmtoll CR2 JEXTSEL LL_ADC_INJ_SetTriggerSource\n + * CR2 JEXTEN LL_ADC_INJ_SetTriggerSource + * @param ADCx ADC instance + * @param TriggerSource This parameter can be one of the following values: + * @arg @ref LL_ADC_INJ_TRIG_SOFTWARE + * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM9_CH1 + * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM9_TRGO + * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM2_TRGO + * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM2_CH1 + * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM3_CH4 + * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM4_TRGO + * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM4_CH1 + * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM4_CH2 + * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM4_CH3 + * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM10_CH1 + * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM7_TRGO + * @arg @ref LL_ADC_INJ_TRIG_EXT_EXTI_LINE15 + * @retval None + */ +__STATIC_INLINE void LL_ADC_INJ_SetTriggerSource(ADC_TypeDef *ADCx, uint32_t TriggerSource) +{ +/* Note: On this STM32 serie, ADC group injected external trigger edge */ +/* is used to perform a ADC conversion start. */ +/* This function does not set external trigger edge. */ +/* This feature is set using function */ +/* @ref LL_ADC_INJ_StartConversionExtTrig(). */ + MODIFY_REG(ADCx->CR2, ADC_CR2_JEXTSEL, (TriggerSource & ADC_CR2_JEXTSEL)); +} + +/** + * @brief Get ADC group injected conversion trigger source: + * internal (SW start) or from external IP (timer event, + * external interrupt line). + * @note To determine whether group injected trigger source is + * internal (SW start) or external, without detail + * of which peripheral is selected as external trigger, + * (equivalent to + * "if(LL_ADC_INJ_GetTriggerSource(ADC1) == LL_ADC_INJ_TRIG_SOFTWARE)") + * use function @ref LL_ADC_INJ_IsTriggerSourceSWStart. + * @note Availability of parameters of trigger sources from timer + * depends on timers availability on the selected device. + * @rmtoll CR2 JEXTSEL LL_ADC_INJ_GetTriggerSource\n + * CR2 JEXTEN LL_ADC_INJ_GetTriggerSource + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_INJ_TRIG_SOFTWARE + * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM9_CH1 + * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM9_TRGO + * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM2_TRGO + * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM2_CH1 + * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM3_CH4 + * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM4_TRGO + * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM4_CH1 + * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM4_CH2 + * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM4_CH3 + * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM10_CH1 + * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM7_TRGO + * @arg @ref LL_ADC_INJ_TRIG_EXT_EXTI_LINE15 + */ +__STATIC_INLINE uint32_t LL_ADC_INJ_GetTriggerSource(ADC_TypeDef *ADCx) +{ + register uint32_t TriggerSource = READ_BIT(ADCx->CR2, ADC_CR2_JEXTSEL | ADC_CR2_JEXTEN); + + /* Value for shift of {0; 4; 8; 12} depending on value of bitfield */ + /* corresponding to ADC_CR2_JEXTEN {0; 1; 2; 3}. */ + register uint32_t ShiftExten = ((TriggerSource & ADC_CR2_JEXTEN) >> (ADC_INJ_TRIG_EXTEN_BITOFFSET_POS - 2U)); + + /* Set bitfield corresponding to ADC_CR2_JEXTEN and ADC_CR2_JEXTSEL */ + /* to match with triggers literals definition. */ + return ((TriggerSource + & (ADC_INJ_TRIG_SOURCE_MASK << ShiftExten) & ADC_CR2_JEXTSEL) + | ((ADC_INJ_TRIG_EDGE_MASK << ShiftExten) & ADC_CR2_JEXTEN) + ); +} + +/** + * @brief Get ADC group injected conversion trigger source internal (SW start) + or external + * @note In case of group injected trigger source set to external trigger, + * to determine which peripheral is selected as external trigger, + * use function @ref LL_ADC_INJ_GetTriggerSource. + * @rmtoll CR2 JEXTEN LL_ADC_INJ_IsTriggerSourceSWStart + * @param ADCx ADC instance + * @retval Value "0" if trigger source external trigger + * Value "1" if trigger source SW start. + */ +__STATIC_INLINE uint32_t LL_ADC_INJ_IsTriggerSourceSWStart(ADC_TypeDef *ADCx) +{ + return (READ_BIT(ADCx->CR2, ADC_CR2_JEXTEN) == (LL_ADC_INJ_TRIG_SOFTWARE & ADC_CR2_JEXTEN)); +} + +/** + * @brief Get ADC group injected conversion trigger polarity. + * Applicable only for trigger source set to external trigger. + * @rmtoll CR2 JEXTEN LL_ADC_INJ_GetTriggerEdge + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_INJ_TRIG_EXT_RISING + * @arg @ref LL_ADC_INJ_TRIG_EXT_FALLING + * @arg @ref LL_ADC_INJ_TRIG_EXT_RISINGFALLING + */ +__STATIC_INLINE uint32_t LL_ADC_INJ_GetTriggerEdge(ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CR2, ADC_CR2_JEXTEN)); +} + +/** + * @brief Set ADC group injected sequencer length and scan direction. + * @note This function performs configuration of: + * - Sequence length: Number of ranks in the scan sequence. + * - Sequence direction: Unless specified in parameters, sequencer + * scan direction is forward (from rank 1 to rank n). + * @note On this STM32 serie, group injected sequencer configuration + * is conditioned to ADC instance sequencer mode. + * If ADC instance sequencer mode is disabled, sequencers of + * all groups (group regular, group injected) can be configured + * but their execution is disabled (limited to rank 1). + * Refer to function @ref LL_ADC_SetSequencersScanMode(). + * @note Sequencer disabled is equivalent to sequencer of 1 rank: + * ADC conversion on only 1 channel. + * @rmtoll JSQR JL LL_ADC_INJ_SetSequencerLength + * @param ADCx ADC instance + * @param SequencerNbRanks This parameter can be one of the following values: + * @arg @ref LL_ADC_INJ_SEQ_SCAN_DISABLE + * @arg @ref LL_ADC_INJ_SEQ_SCAN_ENABLE_2RANKS + * @arg @ref LL_ADC_INJ_SEQ_SCAN_ENABLE_3RANKS + * @arg @ref LL_ADC_INJ_SEQ_SCAN_ENABLE_4RANKS + * @retval None + */ +__STATIC_INLINE void LL_ADC_INJ_SetSequencerLength(ADC_TypeDef *ADCx, uint32_t SequencerNbRanks) +{ + MODIFY_REG(ADCx->JSQR, ADC_JSQR_JL, SequencerNbRanks); +} + +/** + * @brief Get ADC group injected sequencer length and scan direction. + * @note This function retrieves: + * - Sequence length: Number of ranks in the scan sequence. + * - Sequence direction: Unless specified in parameters, sequencer + * scan direction is forward (from rank 1 to rank n). + * @note On this STM32 serie, group injected sequencer configuration + * is conditioned to ADC instance sequencer mode. + * If ADC instance sequencer mode is disabled, sequencers of + * all groups (group regular, group injected) can be configured + * but their execution is disabled (limited to rank 1). + * Refer to function @ref LL_ADC_SetSequencersScanMode(). + * @note Sequencer disabled is equivalent to sequencer of 1 rank: + * ADC conversion on only 1 channel. + * @rmtoll JSQR JL LL_ADC_INJ_GetSequencerLength + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_INJ_SEQ_SCAN_DISABLE + * @arg @ref LL_ADC_INJ_SEQ_SCAN_ENABLE_2RANKS + * @arg @ref LL_ADC_INJ_SEQ_SCAN_ENABLE_3RANKS + * @arg @ref LL_ADC_INJ_SEQ_SCAN_ENABLE_4RANKS + */ +__STATIC_INLINE uint32_t LL_ADC_INJ_GetSequencerLength(ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->JSQR, ADC_JSQR_JL)); +} + +/** + * @brief Set ADC group injected sequencer discontinuous mode: + * sequence subdivided and scan conversions interrupted every selected + * number of ranks. + * @note It is not possible to enable both ADC group injected + * auto-injected mode and sequencer discontinuous mode. + * @rmtoll CR1 DISCEN LL_ADC_INJ_SetSequencerDiscont + * @param ADCx ADC instance + * @param SeqDiscont This parameter can be one of the following values: + * @arg @ref LL_ADC_INJ_SEQ_DISCONT_DISABLE + * @arg @ref LL_ADC_INJ_SEQ_DISCONT_1RANK + * @retval None + */ +__STATIC_INLINE void LL_ADC_INJ_SetSequencerDiscont(ADC_TypeDef *ADCx, uint32_t SeqDiscont) +{ + MODIFY_REG(ADCx->CR1, ADC_CR1_JDISCEN, SeqDiscont); +} + +/** + * @brief Get ADC group injected sequencer discontinuous mode: + * sequence subdivided and scan conversions interrupted every selected + * number of ranks. + * @rmtoll CR1 DISCEN LL_ADC_REG_GetSequencerDiscont + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_INJ_SEQ_DISCONT_DISABLE + * @arg @ref LL_ADC_INJ_SEQ_DISCONT_1RANK + */ +__STATIC_INLINE uint32_t LL_ADC_INJ_GetSequencerDiscont(ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CR1, ADC_CR1_JDISCEN)); +} + +/** + * @brief Set ADC group injected sequence: channel on the selected + * sequence rank. + * @note Depending on devices and packages, some channels may not be available. + * Refer to device datasheet for channels availability. + * @note On this STM32 serie, to measure internal channels (VrefInt, + * TempSensor, ...), measurement paths to internal channels must be + * enabled separately. + * This can be done using function @ref LL_ADC_SetCommonPathInternalCh(). + * @rmtoll JSQR JSQ1 LL_ADC_INJ_SetSequencerRanks\n + * JSQR JSQ2 LL_ADC_INJ_SetSequencerRanks\n + * JSQR JSQ3 LL_ADC_INJ_SetSequencerRanks\n + * JSQR JSQ4 LL_ADC_INJ_SetSequencerRanks + * @param ADCx ADC instance + * @param Rank This parameter can be one of the following values: + * @arg @ref LL_ADC_INJ_RANK_1 + * @arg @ref LL_ADC_INJ_RANK_2 + * @arg @ref LL_ADC_INJ_RANK_3 + * @arg @ref LL_ADC_INJ_RANK_4 + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_ADC_CHANNEL_0 (2) + * @arg @ref LL_ADC_CHANNEL_1 (2) + * @arg @ref LL_ADC_CHANNEL_2 (2) + * @arg @ref LL_ADC_CHANNEL_3 (2) + * @arg @ref LL_ADC_CHANNEL_4 (1) + * @arg @ref LL_ADC_CHANNEL_5 (1) + * @arg @ref LL_ADC_CHANNEL_6 (2) + * @arg @ref LL_ADC_CHANNEL_7 (2) + * @arg @ref LL_ADC_CHANNEL_8 (2) + * @arg @ref LL_ADC_CHANNEL_9 (2) + * @arg @ref LL_ADC_CHANNEL_10 (2) + * @arg @ref LL_ADC_CHANNEL_11 (2) + * @arg @ref LL_ADC_CHANNEL_12 (2) + * @arg @ref LL_ADC_CHANNEL_13 (3) + * @arg @ref LL_ADC_CHANNEL_14 (3) + * @arg @ref LL_ADC_CHANNEL_15 (3) + * @arg @ref LL_ADC_CHANNEL_16 (3) + * @arg @ref LL_ADC_CHANNEL_17 (3) + * @arg @ref LL_ADC_CHANNEL_18 (3) + * @arg @ref LL_ADC_CHANNEL_19 (3) + * @arg @ref LL_ADC_CHANNEL_20 (3) + * @arg @ref LL_ADC_CHANNEL_21 (3) + * @arg @ref LL_ADC_CHANNEL_22 (1) + * @arg @ref LL_ADC_CHANNEL_23 (1) + * @arg @ref LL_ADC_CHANNEL_24 (1) + * @arg @ref LL_ADC_CHANNEL_25 (1) + * @arg @ref LL_ADC_CHANNEL_26 (3) + * @arg @ref LL_ADC_CHANNEL_27 (3)(4) + * @arg @ref LL_ADC_CHANNEL_28 (3)(4) + * @arg @ref LL_ADC_CHANNEL_29 (3)(4) + * @arg @ref LL_ADC_CHANNEL_30 (3)(4) + * @arg @ref LL_ADC_CHANNEL_31 (3)(4) + * @arg @ref LL_ADC_CHANNEL_VREFINT (3) + * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR (3) + * @arg @ref LL_ADC_CHANNEL_VCOMP (3) + * @arg @ref LL_ADC_CHANNEL_VOPAMP1 (3)(5) + * @arg @ref LL_ADC_CHANNEL_VOPAMP2 (3)(5) + * @arg @ref LL_ADC_CHANNEL_VOPAMP3 (3)(5) + * + * (1) On STM32L1, connection via routing interface (RI) specificity: fast channel (channel routed directly to ADC switch matrix).\n + * (2) On STM32L1, for devices with feature 'channels banks' available: Channel different in bank A and bank B.\n + * (3) On STM32L1, for devices with feature 'channels banks' available: Channel common to both bank A and bank B.\n + * (4) On STM32L1, parameter not available on all devices: only on STM32L1 Cat.4 and Cat.5.\n + * (5) On STM32L1, parameter not available on all devices: OPAMP1 and OPAMP2 available only on STM32L1 Cat.3, Cat.4 and Cat.5, OPAMP3 available only on STM32L1 Cat.4 and Cat.5 + * @retval None + */ +__STATIC_INLINE void LL_ADC_INJ_SetSequencerRanks(ADC_TypeDef *ADCx, uint32_t Rank, uint32_t Channel) +{ + /* Set bits with content of parameter "Channel" with bits position */ + /* in register depending on parameter "Rank". */ + /* Parameters "Rank" and "Channel" are used with masks because containing */ + /* other bits reserved for other purpose. */ + MODIFY_REG(ADCx->JSQR, + ADC_CHANNEL_ID_NUMBER_MASK << (Rank & ADC_INJ_RANK_ID_JSQR_MASK), + (Channel & ADC_CHANNEL_ID_NUMBER_MASK) << (Rank & ADC_INJ_RANK_ID_JSQR_MASK)); +} + +/** + * @brief Get ADC group injected sequence: channel on the selected + * sequence rank. + * @note Depending on devices and packages, some channels may not be available. + * Refer to device datasheet for channels availability. + * @note Usage of the returned channel number: + * - To reinject this channel into another function LL_ADC_xxx: + * the returned channel number is only partly formatted on definition + * of literals LL_ADC_CHANNEL_x. Therefore, it has to be compared + * with parts of literals LL_ADC_CHANNEL_x or using + * helper macro @ref __LL_ADC_CHANNEL_TO_DECIMAL_NB(). + * Then the selected literal LL_ADC_CHANNEL_x can be used + * as parameter for another function. + * - To get the channel number in decimal format: + * process the returned value with the helper macro + * @ref __LL_ADC_CHANNEL_TO_DECIMAL_NB(). + * @rmtoll JSQR JSQ1 LL_ADC_INJ_SetSequencerRanks\n + * JSQR JSQ2 LL_ADC_INJ_SetSequencerRanks\n + * JSQR JSQ3 LL_ADC_INJ_SetSequencerRanks\n + * JSQR JSQ4 LL_ADC_INJ_SetSequencerRanks + * @param ADCx ADC instance + * @param Rank This parameter can be one of the following values: + * @arg @ref LL_ADC_INJ_RANK_1 + * @arg @ref LL_ADC_INJ_RANK_2 + * @arg @ref LL_ADC_INJ_RANK_3 + * @arg @ref LL_ADC_INJ_RANK_4 + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_CHANNEL_0 (2) + * @arg @ref LL_ADC_CHANNEL_1 (2) + * @arg @ref LL_ADC_CHANNEL_2 (2) + * @arg @ref LL_ADC_CHANNEL_3 (2) + * @arg @ref LL_ADC_CHANNEL_4 (1) + * @arg @ref LL_ADC_CHANNEL_5 (1) + * @arg @ref LL_ADC_CHANNEL_6 (2) + * @arg @ref LL_ADC_CHANNEL_7 (2) + * @arg @ref LL_ADC_CHANNEL_8 (2) + * @arg @ref LL_ADC_CHANNEL_9 (2) + * @arg @ref LL_ADC_CHANNEL_10 (2) + * @arg @ref LL_ADC_CHANNEL_11 (2) + * @arg @ref LL_ADC_CHANNEL_12 (2) + * @arg @ref LL_ADC_CHANNEL_13 (3) + * @arg @ref LL_ADC_CHANNEL_14 (3) + * @arg @ref LL_ADC_CHANNEL_15 (3) + * @arg @ref LL_ADC_CHANNEL_16 (3) + * @arg @ref LL_ADC_CHANNEL_17 (3) + * @arg @ref LL_ADC_CHANNEL_18 (3) + * @arg @ref LL_ADC_CHANNEL_19 (3) + * @arg @ref LL_ADC_CHANNEL_20 (3) + * @arg @ref LL_ADC_CHANNEL_21 (3) + * @arg @ref LL_ADC_CHANNEL_22 (1) + * @arg @ref LL_ADC_CHANNEL_23 (1) + * @arg @ref LL_ADC_CHANNEL_24 (1) + * @arg @ref LL_ADC_CHANNEL_25 (1) + * @arg @ref LL_ADC_CHANNEL_26 (3) + * @arg @ref LL_ADC_CHANNEL_27 (3)(4) + * @arg @ref LL_ADC_CHANNEL_28 (3)(4) + * @arg @ref LL_ADC_CHANNEL_29 (3)(4) + * @arg @ref LL_ADC_CHANNEL_30 (3)(4) + * @arg @ref LL_ADC_CHANNEL_31 (3)(4) + * @arg @ref LL_ADC_CHANNEL_VREFINT (3)(6) + * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR (3)(6) + * @arg @ref LL_ADC_CHANNEL_VCOMP (3)(6) + * @arg @ref LL_ADC_CHANNEL_VOPAMP1 (3)(5) + * @arg @ref LL_ADC_CHANNEL_VOPAMP2 (3)(5) + * @arg @ref LL_ADC_CHANNEL_VOPAMP3 (3)(5) + * + * (1) On STM32L1, connection via routing interface (RI) specificity: fast channel (channel routed directly to ADC switch matrix).\n + * (2) On STM32L1, for devices with feature 'channels banks' available: Channel different in bank A and bank B.\n + * (3) On STM32L1, for devices with feature 'channels banks' available: Channel common to both bank A and bank B.\n + * (4) On STM32L1, parameter not available on all devices: only on STM32L1 Cat.4 and Cat.5.\n + * (5) On STM32L1, parameter not available on all devices: OPAMP1 and OPAMP2 available only on STM32L1 Cat.3, Cat.4 and Cat.5, OPAMP3 available only on STM32L1 Cat.4 and Cat.5.\n + * (6) For ADC channel read back from ADC register, + * comparison with internal channel parameter to be done + * using helper macro @ref __LL_ADC_CHANNEL_INTERNAL_TO_EXTERNAL(). + */ +__STATIC_INLINE uint32_t LL_ADC_INJ_GetSequencerRanks(ADC_TypeDef *ADCx, uint32_t Rank) +{ + return (uint32_t)(READ_BIT(ADCx->JSQR, + ADC_CHANNEL_ID_NUMBER_MASK << (Rank & ADC_INJ_RANK_ID_JSQR_MASK)) + >> (Rank & ADC_INJ_RANK_ID_JSQR_MASK) + ); +} + +/** + * @brief Set ADC group injected conversion trigger: + * independent or from ADC group regular. + * @note This mode can be used to extend number of data registers + * updated after one ADC conversion trigger and with data + * permanently kept (not erased by successive conversions of scan of + * ADC sequencer ranks), up to 5 data registers: + * 1 data register on ADC group regular, 4 data registers + * on ADC group injected. + * @note If ADC group injected injected trigger source is set to an + * external trigger, this feature must be must be set to + * independent trigger. + * ADC group injected automatic trigger is compliant only with + * group injected trigger source set to SW start, without any + * further action on ADC group injected conversion start or stop: + * in this case, ADC group injected is controlled only + * from ADC group regular. + * @note It is not possible to enable both ADC group injected + * auto-injected mode and sequencer discontinuous mode. + * @rmtoll CR1 JAUTO LL_ADC_INJ_SetTrigAuto + * @param ADCx ADC instance + * @param TrigAuto This parameter can be one of the following values: + * @arg @ref LL_ADC_INJ_TRIG_INDEPENDENT + * @arg @ref LL_ADC_INJ_TRIG_FROM_GRP_REGULAR + * @retval None + */ +__STATIC_INLINE void LL_ADC_INJ_SetTrigAuto(ADC_TypeDef *ADCx, uint32_t TrigAuto) +{ + MODIFY_REG(ADCx->CR1, ADC_CR1_JAUTO, TrigAuto); +} + +/** + * @brief Get ADC group injected conversion trigger: + * independent or from ADC group regular. + * @rmtoll CR1 JAUTO LL_ADC_INJ_GetTrigAuto + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_INJ_TRIG_INDEPENDENT + * @arg @ref LL_ADC_INJ_TRIG_FROM_GRP_REGULAR + */ +__STATIC_INLINE uint32_t LL_ADC_INJ_GetTrigAuto(ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CR1, ADC_CR1_JAUTO)); +} + +/** + * @brief Set ADC group injected offset. + * @note It sets: + * - ADC group injected rank to which the offset programmed + * will be applied + * - Offset level (offset to be subtracted from the raw + * converted data). + * Caution: Offset format is dependent to ADC resolution: + * offset has to be left-aligned on bit 11, the LSB (right bits) + * are set to 0. + * @note Offset cannot be enabled or disabled. + * To emulate offset disabled, set an offset value equal to 0. + * @rmtoll JOFR1 JOFFSET1 LL_ADC_INJ_SetOffset\n + * JOFR2 JOFFSET2 LL_ADC_INJ_SetOffset\n + * JOFR3 JOFFSET3 LL_ADC_INJ_SetOffset\n + * JOFR4 JOFFSET4 LL_ADC_INJ_SetOffset + * @param ADCx ADC instance + * @param Rank This parameter can be one of the following values: + * @arg @ref LL_ADC_INJ_RANK_1 + * @arg @ref LL_ADC_INJ_RANK_2 + * @arg @ref LL_ADC_INJ_RANK_3 + * @arg @ref LL_ADC_INJ_RANK_4 + * @param OffsetLevel Value between Min_Data=0x000 and Max_Data=0xFFF + * @retval None + */ +__STATIC_INLINE void LL_ADC_INJ_SetOffset(ADC_TypeDef *ADCx, uint32_t Rank, uint32_t OffsetLevel) +{ + register uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->JOFR1, __ADC_MASK_SHIFT(Rank, ADC_INJ_JOFRX_REGOFFSET_MASK)); + + MODIFY_REG(*preg, + ADC_JOFR1_JOFFSET1, + OffsetLevel); +} + +/** + * @brief Get ADC group injected offset. + * @note It gives offset level (offset to be subtracted from the raw converted data). + * Caution: Offset format is dependent to ADC resolution: + * offset has to be left-aligned on bit 11, the LSB (right bits) + * are set to 0. + * @rmtoll JOFR1 JOFFSET1 LL_ADC_INJ_GetOffset\n + * JOFR2 JOFFSET2 LL_ADC_INJ_GetOffset\n + * JOFR3 JOFFSET3 LL_ADC_INJ_GetOffset\n + * JOFR4 JOFFSET4 LL_ADC_INJ_GetOffset + * @param ADCx ADC instance + * @param Rank This parameter can be one of the following values: + * @arg @ref LL_ADC_INJ_RANK_1 + * @arg @ref LL_ADC_INJ_RANK_2 + * @arg @ref LL_ADC_INJ_RANK_3 + * @arg @ref LL_ADC_INJ_RANK_4 + * @retval Value between Min_Data=0x000 and Max_Data=0xFFF + */ +__STATIC_INLINE uint32_t LL_ADC_INJ_GetOffset(ADC_TypeDef *ADCx, uint32_t Rank) +{ + register uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->JOFR1, __ADC_MASK_SHIFT(Rank, ADC_INJ_JOFRX_REGOFFSET_MASK)); + + return (uint32_t)(READ_BIT(*preg, + ADC_JOFR1_JOFFSET1) + ); +} + +/** + * @} + */ + +/** @defgroup ADC_LL_EF_Configuration_Channels Configuration of ADC hierarchical scope: channels + * @{ + */ + +/** + * @brief Set sampling time of the selected ADC channel + * Unit: ADC clock cycles. + * @note On this device, sampling time is on channel scope: independently + * of channel mapped on ADC group regular or injected. + * @note In case of internal channel (VrefInt, TempSensor, ...) to be + * converted: + * sampling time constraints must be respected (sampling time can be + * adjusted in function of ADC clock frequency and sampling time + * setting). + * Refer to device datasheet for timings values (parameters TS_vrefint, + * TS_temp, ...). + * @note Conversion time is the addition of sampling time and processing time. + * Refer to reference manual for ADC processing time of + * this STM32 serie. + * @note In case of ADC conversion of internal channel (VrefInt, + * temperature sensor, ...), a sampling time minimum value + * is required. + * Refer to device datasheet. + * @rmtoll SMPR0 SMP31 LL_ADC_SetChannelSamplingTime\n + * SMPR0 SMP30 LL_ADC_SetChannelSamplingTime\n + * SMPR1 SMP29 LL_ADC_SetChannelSamplingTime\n + * SMPR1 SMP28 LL_ADC_SetChannelSamplingTime\n + * SMPR1 SMP27 LL_ADC_SetChannelSamplingTime\n + * SMPR1 SMP26 LL_ADC_SetChannelSamplingTime\n + * SMPR1 SMP25 LL_ADC_SetChannelSamplingTime\n + * SMPR1 SMP24 LL_ADC_SetChannelSamplingTime\n + * SMPR1 SMP23 LL_ADC_SetChannelSamplingTime\n + * SMPR1 SMP22 LL_ADC_SetChannelSamplingTime\n + * SMPR1 SMP21 LL_ADC_SetChannelSamplingTime\n + * SMPR1 SMP20 LL_ADC_SetChannelSamplingTime\n + * SMPR2 SMP19 LL_ADC_SetChannelSamplingTime\n + * SMPR2 SMP18 LL_ADC_SetChannelSamplingTime\n + * SMPR2 SMP17 LL_ADC_SetChannelSamplingTime\n + * SMPR2 SMP16 LL_ADC_SetChannelSamplingTime\n + * SMPR2 SMP15 LL_ADC_SetChannelSamplingTime\n + * SMPR2 SMP14 LL_ADC_SetChannelSamplingTime\n + * SMPR2 SMP13 LL_ADC_SetChannelSamplingTime\n + * SMPR2 SMP12 LL_ADC_SetChannelSamplingTime\n + * SMPR2 SMP11 LL_ADC_SetChannelSamplingTime\n + * SMPR2 SMP10 LL_ADC_SetChannelSamplingTime\n + * SMPR3 SMP9 LL_ADC_SetChannelSamplingTime\n + * SMPR3 SMP8 LL_ADC_SetChannelSamplingTime\n + * SMPR3 SMP7 LL_ADC_SetChannelSamplingTime\n + * SMPR3 SMP6 LL_ADC_SetChannelSamplingTime\n + * SMPR3 SMP5 LL_ADC_SetChannelSamplingTime\n + * SMPR3 SMP4 LL_ADC_SetChannelSamplingTime\n + * SMPR3 SMP3 LL_ADC_SetChannelSamplingTime\n + * SMPR3 SMP2 LL_ADC_SetChannelSamplingTime\n + * SMPR3 SMP1 LL_ADC_SetChannelSamplingTime\n + * SMPR3 SMP0 LL_ADC_SetChannelSamplingTime + * @param ADCx ADC instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_ADC_CHANNEL_0 (2) + * @arg @ref LL_ADC_CHANNEL_1 (2) + * @arg @ref LL_ADC_CHANNEL_2 (2) + * @arg @ref LL_ADC_CHANNEL_3 (2) + * @arg @ref LL_ADC_CHANNEL_4 (1) + * @arg @ref LL_ADC_CHANNEL_5 (1) + * @arg @ref LL_ADC_CHANNEL_6 (2) + * @arg @ref LL_ADC_CHANNEL_7 (2) + * @arg @ref LL_ADC_CHANNEL_8 (2) + * @arg @ref LL_ADC_CHANNEL_9 (2) + * @arg @ref LL_ADC_CHANNEL_10 (2) + * @arg @ref LL_ADC_CHANNEL_11 (2) + * @arg @ref LL_ADC_CHANNEL_12 (2) + * @arg @ref LL_ADC_CHANNEL_13 (3) + * @arg @ref LL_ADC_CHANNEL_14 (3) + * @arg @ref LL_ADC_CHANNEL_15 (3) + * @arg @ref LL_ADC_CHANNEL_16 (3) + * @arg @ref LL_ADC_CHANNEL_17 (3) + * @arg @ref LL_ADC_CHANNEL_18 (3) + * @arg @ref LL_ADC_CHANNEL_19 (3) + * @arg @ref LL_ADC_CHANNEL_20 (3) + * @arg @ref LL_ADC_CHANNEL_21 (3) + * @arg @ref LL_ADC_CHANNEL_22 (1) + * @arg @ref LL_ADC_CHANNEL_23 (1) + * @arg @ref LL_ADC_CHANNEL_24 (1) + * @arg @ref LL_ADC_CHANNEL_25 (1) + * @arg @ref LL_ADC_CHANNEL_26 (3) + * @arg @ref LL_ADC_CHANNEL_27 (3)(4) + * @arg @ref LL_ADC_CHANNEL_28 (3)(4) + * @arg @ref LL_ADC_CHANNEL_29 (3)(4) + * @arg @ref LL_ADC_CHANNEL_30 (3)(4) + * @arg @ref LL_ADC_CHANNEL_31 (3)(4) + * @arg @ref LL_ADC_CHANNEL_VREFINT (3) + * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR (3) + * @arg @ref LL_ADC_CHANNEL_VCOMP (3) + * @arg @ref LL_ADC_CHANNEL_VOPAMP1 (3)(5) + * @arg @ref LL_ADC_CHANNEL_VOPAMP2 (3)(5) + * @arg @ref LL_ADC_CHANNEL_VOPAMP3 (3)(5) + * + * (1) On STM32L1, connection via routing interface (RI) specificity: fast channel (channel routed directly to ADC switch matrix).\n + * (2) On STM32L1, for devices with feature 'channels banks' available: Channel different in bank A and bank B.\n + * (3) On STM32L1, for devices with feature 'channels banks' available: Channel common to both bank A and bank B.\n + * (4) On STM32L1, parameter not available on all devices: only on STM32L1 Cat.4 and Cat.5.\n + * (5) On STM32L1, parameter not available on all devices: OPAMP1 and OPAMP2 available only on STM32L1 Cat.3, Cat.4 and Cat.5, OPAMP3 available only on STM32L1 Cat.4 and Cat.5 + * @param SamplingTime This parameter can be one of the following values: + * @arg @ref LL_ADC_SAMPLINGTIME_4CYCLES + * @arg @ref LL_ADC_SAMPLINGTIME_9CYCLES + * @arg @ref LL_ADC_SAMPLINGTIME_16CYCLES + * @arg @ref LL_ADC_SAMPLINGTIME_24CYCLES + * @arg @ref LL_ADC_SAMPLINGTIME_48CYCLES + * @arg @ref LL_ADC_SAMPLINGTIME_96CYCLES + * @arg @ref LL_ADC_SAMPLINGTIME_192CYCLES + * @arg @ref LL_ADC_SAMPLINGTIME_384CYCLES + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetChannelSamplingTime(ADC_TypeDef *ADCx, uint32_t Channel, uint32_t SamplingTime) +{ + /* Set bits with content of parameter "SamplingTime" with bits position */ + /* in register and register position depending on parameter "Channel". */ + /* Parameter "Channel" is used with masks because containing */ + /* other bits reserved for other purpose. */ + register uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->SMPR1, __ADC_MASK_SHIFT(Channel, ADC_CHANNEL_SMPRX_REGOFFSET_MASK)); + + MODIFY_REG(*preg, + ADC_SMPR3_SMP0 << __ADC_MASK_SHIFT(Channel, ADC_CHANNEL_SMPx_BITOFFSET_MASK), + SamplingTime << __ADC_MASK_SHIFT(Channel, ADC_CHANNEL_SMPx_BITOFFSET_MASK)); +} + +/** + * @brief Get sampling time of the selected ADC channel + * Unit: ADC clock cycles. + * @note On this device, sampling time is on channel scope: independently + * of channel mapped on ADC group regular or injected. + * @note Conversion time is the addition of sampling time and processing time. + * Refer to reference manual for ADC processing time of + * this STM32 serie. + * @rmtoll SMPR0 SMP31 LL_ADC_GetChannelSamplingTime\n + * SMPR0 SMP30 LL_ADC_GetChannelSamplingTime\n + * SMPR1 SMP29 LL_ADC_GetChannelSamplingTime\n + * SMPR1 SMP28 LL_ADC_GetChannelSamplingTime\n + * SMPR1 SMP27 LL_ADC_GetChannelSamplingTime\n + * SMPR1 SMP26 LL_ADC_GetChannelSamplingTime\n + * SMPR1 SMP25 LL_ADC_GetChannelSamplingTime\n + * SMPR1 SMP24 LL_ADC_GetChannelSamplingTime\n + * SMPR1 SMP23 LL_ADC_GetChannelSamplingTime\n + * SMPR1 SMP22 LL_ADC_GetChannelSamplingTime\n + * SMPR1 SMP21 LL_ADC_GetChannelSamplingTime\n + * SMPR1 SMP20 LL_ADC_GetChannelSamplingTime\n + * SMPR2 SMP19 LL_ADC_GetChannelSamplingTime\n + * SMPR2 SMP18 LL_ADC_GetChannelSamplingTime\n + * SMPR2 SMP17 LL_ADC_GetChannelSamplingTime\n + * SMPR2 SMP16 LL_ADC_GetChannelSamplingTime\n + * SMPR2 SMP15 LL_ADC_GetChannelSamplingTime\n + * SMPR2 SMP14 LL_ADC_GetChannelSamplingTime\n + * SMPR2 SMP13 LL_ADC_GetChannelSamplingTime\n + * SMPR2 SMP12 LL_ADC_GetChannelSamplingTime\n + * SMPR2 SMP11 LL_ADC_GetChannelSamplingTime\n + * SMPR2 SMP10 LL_ADC_GetChannelSamplingTime\n + * SMPR3 SMP9 LL_ADC_GetChannelSamplingTime\n + * SMPR3 SMP8 LL_ADC_GetChannelSamplingTime\n + * SMPR3 SMP7 LL_ADC_GetChannelSamplingTime\n + * SMPR3 SMP6 LL_ADC_GetChannelSamplingTime\n + * SMPR3 SMP5 LL_ADC_GetChannelSamplingTime\n + * SMPR3 SMP4 LL_ADC_GetChannelSamplingTime\n + * SMPR3 SMP3 LL_ADC_GetChannelSamplingTime\n + * SMPR3 SMP2 LL_ADC_GetChannelSamplingTime\n + * SMPR3 SMP1 LL_ADC_GetChannelSamplingTime\n + * SMPR3 SMP0 LL_ADC_GetChannelSamplingTime + * @param ADCx ADC instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_ADC_CHANNEL_0 (2) + * @arg @ref LL_ADC_CHANNEL_1 (2) + * @arg @ref LL_ADC_CHANNEL_2 (2) + * @arg @ref LL_ADC_CHANNEL_3 (2) + * @arg @ref LL_ADC_CHANNEL_4 (1) + * @arg @ref LL_ADC_CHANNEL_5 (1) + * @arg @ref LL_ADC_CHANNEL_6 (2) + * @arg @ref LL_ADC_CHANNEL_7 (2) + * @arg @ref LL_ADC_CHANNEL_8 (2) + * @arg @ref LL_ADC_CHANNEL_9 (2) + * @arg @ref LL_ADC_CHANNEL_10 (2) + * @arg @ref LL_ADC_CHANNEL_11 (2) + * @arg @ref LL_ADC_CHANNEL_12 (2) + * @arg @ref LL_ADC_CHANNEL_13 (3) + * @arg @ref LL_ADC_CHANNEL_14 (3) + * @arg @ref LL_ADC_CHANNEL_15 (3) + * @arg @ref LL_ADC_CHANNEL_16 (3) + * @arg @ref LL_ADC_CHANNEL_17 (3) + * @arg @ref LL_ADC_CHANNEL_18 (3) + * @arg @ref LL_ADC_CHANNEL_19 (3) + * @arg @ref LL_ADC_CHANNEL_20 (3) + * @arg @ref LL_ADC_CHANNEL_21 (3) + * @arg @ref LL_ADC_CHANNEL_22 (1) + * @arg @ref LL_ADC_CHANNEL_23 (1) + * @arg @ref LL_ADC_CHANNEL_24 (1) + * @arg @ref LL_ADC_CHANNEL_25 (1) + * @arg @ref LL_ADC_CHANNEL_26 (3) + * @arg @ref LL_ADC_CHANNEL_27 (3)(4) + * @arg @ref LL_ADC_CHANNEL_28 (3)(4) + * @arg @ref LL_ADC_CHANNEL_29 (3)(4) + * @arg @ref LL_ADC_CHANNEL_30 (3)(4) + * @arg @ref LL_ADC_CHANNEL_31 (3)(4) + * @arg @ref LL_ADC_CHANNEL_VREFINT (3) + * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR (3) + * @arg @ref LL_ADC_CHANNEL_VCOMP (3) + * @arg @ref LL_ADC_CHANNEL_VOPAMP1 (3)(5) + * @arg @ref LL_ADC_CHANNEL_VOPAMP2 (3)(5) + * @arg @ref LL_ADC_CHANNEL_VOPAMP3 (3)(5) + * + * (1) On STM32L1, connection via routing interface (RI) specificity: fast channel (channel routed directly to ADC switch matrix).\n + * (2) On STM32L1, for devices with feature 'channels banks' available: Channel different in bank A and bank B.\n + * (3) On STM32L1, for devices with feature 'channels banks' available: Channel common to both bank A and bank B.\n + * (4) On STM32L1, parameter not available on all devices: only on STM32L1 Cat.4 and Cat.5.\n + * (5) On STM32L1, parameter not available on all devices: OPAMP1 and OPAMP2 available only on STM32L1 Cat.3, Cat.4 and Cat.5, OPAMP3 available only on STM32L1 Cat.4 and Cat.5 + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_SAMPLINGTIME_4CYCLES + * @arg @ref LL_ADC_SAMPLINGTIME_9CYCLES + * @arg @ref LL_ADC_SAMPLINGTIME_16CYCLES + * @arg @ref LL_ADC_SAMPLINGTIME_24CYCLES + * @arg @ref LL_ADC_SAMPLINGTIME_48CYCLES + * @arg @ref LL_ADC_SAMPLINGTIME_96CYCLES + * @arg @ref LL_ADC_SAMPLINGTIME_192CYCLES + * @arg @ref LL_ADC_SAMPLINGTIME_384CYCLES + */ +__STATIC_INLINE uint32_t LL_ADC_GetChannelSamplingTime(ADC_TypeDef *ADCx, uint32_t Channel) +{ + register uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->SMPR1, __ADC_MASK_SHIFT(Channel, ADC_CHANNEL_SMPRX_REGOFFSET_MASK)); + + return (uint32_t)(READ_BIT(*preg, + ADC_SMPR3_SMP0 << __ADC_MASK_SHIFT(Channel, ADC_CHANNEL_SMPx_BITOFFSET_MASK)) + >> __ADC_MASK_SHIFT(Channel, ADC_CHANNEL_SMPx_BITOFFSET_MASK) + ); +} + +#if defined(COMP_CSR_FCH3) +/** + * @brief Set ADC channels routing. + * @note Channel routing set configuration between ADC IP and GPIO pads, + * it is used to increase ADC channels speed (setting of + * direct channel). + * @note This feature is specific to STM32L1, on devices + * category Cat.3, Cat.4, Cat.5. + * To use this function, COMP RCC clock domain must be enabled. + * Refer to @ref LL_APB1_GRP1_PERIPH_COMP. + * @rmtoll CSR FCH3 LL_ADC_SetChannelRouting + * @rmtoll CSR FCH8 LL_ADC_SetChannelRouting + * @rmtoll CSR RCH13 LL_ADC_SetChannelRouting + * @param ADCx ADC instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_ADC_CHANNEL_3_ROUTING (1) + * @arg @ref LL_ADC_CHANNEL_8_ROUTING (2) + * @arg @ref LL_ADC_CHANNEL_13_ROUTING (3) + * + * (1) Used as ADC direct channel (fast channel) if OPAMP1 is + * in power down mode.\n + * (2) Used as ADC direct channel (fast channel) if OPAMP2 is + * in power down mode.\n + * (3) Used as ADC re-routed channel if OPAMP3 is + * in power down mode. + * Otherwise, channel 13 is connected to OPAMP3 output and routed + * through switches COMP1_SW1 and VCOMP to ADC switch matrix. + * (Note: OPAMP3 is available on STM32L1 Cat.4 only). + * @param Routing This parameter can be one of the following values: + * @arg @ref LL_ADC_CHANNEL_ROUTING_DEFAULT + * @arg @ref LL_ADC_CHANNEL_ROUTING_DIRECT + */ +__STATIC_INLINE void LL_ADC_SetChannelRouting(ADC_TypeDef *ADCx, uint32_t Channel, uint32_t Routing) +{ + /* Note: Bit is located in comparator IP, but dedicated to ADC */ + MODIFY_REG(COMP->CSR, Channel, (Routing << POSITION_VAL(Channel))); +} + +/** + * @brief Get ADC channels speed. + * @note Channel routing set configuration between ADC IP and GPIO pads, + * it is used to increase ADC channels speed (setting of + * direct channel). + * @note This feature is specific to STM32L1, on devices + * category Cat.3, Cat.4, Cat.5. + * To use this function, COMP RCC clock domain must be enabled. + * Refer to @ref LL_APB1_GRP1_PERIPH_COMP. + * @rmtoll CSR FCH3 LL_ADC_GetChannelRouting + * @rmtoll CSR FCH8 LL_ADC_GetChannelRouting + * @rmtoll CSR RCH13 LL_ADC_GetChannelRouting + * @param ADCx ADC instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_ADC_CHANNEL_3_ROUTING (1) + * @arg @ref LL_ADC_CHANNEL_8_ROUTING (2) + * @arg @ref LL_ADC_CHANNEL_13_ROUTING (3) + * + * (1) Used as ADC direct channel (fast channel) if OPAMP1 is + * in power down mode.\n + * (2) Used as ADC direct channel (fast channel) if OPAMP2 is + * in power down mode.\n + * (3) Used as ADC re-routed channel if OPAMP3 is + * in power down mode. + * Otherwise, channel 13 is connected to OPAMP3 output and routed + * through switches COMP1_SW1 and VCOMP to ADC switch matrix. + * (Note: OPAMP3 is available on STM32L1 Cat.4 only). + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_CHANNEL_ROUTING_DEFAULT + * @arg @ref LL_ADC_CHANNEL_ROUTING_DIRECT + */ +__STATIC_INLINE uint32_t LL_ADC_GetChannelRouting(ADC_TypeDef *ADCx, uint32_t Channel) +{ + /* Note: Bit is located in comparator IP, but dedicated to ADC */ + return (uint32_t)(READ_BIT(COMP->CSR, Channel) >> POSITION_VAL(Channel)); +} +#endif + +/** + * @} + */ + +/** @defgroup ADC_LL_EF_Configuration_ADC_AnalogWatchdog Configuration of ADC transversal scope: analog watchdog + * @{ + */ + +/** + * @brief Set ADC analog watchdog monitored channels: + * a single channel or all channels, + * on ADC groups regular and-or injected. + * @note Once monitored channels are selected, analog watchdog + * is enabled. + * @note In case of need to define a single channel to monitor + * with analog watchdog from sequencer channel definition, + * use helper macro @ref __LL_ADC_ANALOGWD_CHANNEL_GROUP(). + * @note On this STM32 serie, there is only 1 kind of analog watchdog + * instance: + * - AWD standard (instance AWD1): + * - channels monitored: can monitor 1 channel or all channels. + * - groups monitored: ADC groups regular and-or injected. + * - resolution: resolution is not limited (corresponds to + * ADC resolution configured). + * @rmtoll CR1 AWD1CH LL_ADC_SetAnalogWDMonitChannels\n + * CR1 AWD1SGL LL_ADC_SetAnalogWDMonitChannels\n + * CR1 AWD1EN LL_ADC_SetAnalogWDMonitChannels + * @param ADCx ADC instance + * @param AWDChannelGroup This parameter can be one of the following values: + * @arg @ref LL_ADC_AWD_DISABLE + * @arg @ref LL_ADC_AWD_ALL_CHANNELS_REG + * @arg @ref LL_ADC_AWD_ALL_CHANNELS_INJ + * @arg @ref LL_ADC_AWD_ALL_CHANNELS_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_0_REG (2) + * @arg @ref LL_ADC_AWD_CHANNEL_0_INJ (2) + * @arg @ref LL_ADC_AWD_CHANNEL_0_REG_INJ (2) + * @arg @ref LL_ADC_AWD_CHANNEL_1_REG (2) + * @arg @ref LL_ADC_AWD_CHANNEL_1_INJ (2) + * @arg @ref LL_ADC_AWD_CHANNEL_1_REG_INJ (2) + * @arg @ref LL_ADC_AWD_CHANNEL_2_REG (2) + * @arg @ref LL_ADC_AWD_CHANNEL_2_INJ (2) + * @arg @ref LL_ADC_AWD_CHANNEL_2_REG_INJ (2) + * @arg @ref LL_ADC_AWD_CHANNEL_3_REG (2) + * @arg @ref LL_ADC_AWD_CHANNEL_3_INJ (2) + * @arg @ref LL_ADC_AWD_CHANNEL_3_REG_INJ (2) + * @arg @ref LL_ADC_AWD_CHANNEL_4_REG (1) + * @arg @ref LL_ADC_AWD_CHANNEL_4_INJ (1) + * @arg @ref LL_ADC_AWD_CHANNEL_4_REG_INJ (1) + * @arg @ref LL_ADC_AWD_CHANNEL_5_REG (1) + * @arg @ref LL_ADC_AWD_CHANNEL_5_INJ (1) + * @arg @ref LL_ADC_AWD_CHANNEL_5_REG_INJ (1) + * @arg @ref LL_ADC_AWD_CHANNEL_6_REG (2) + * @arg @ref LL_ADC_AWD_CHANNEL_6_INJ (2) + * @arg @ref LL_ADC_AWD_CHANNEL_6_REG_INJ (2) + * @arg @ref LL_ADC_AWD_CHANNEL_7_REG (2) + * @arg @ref LL_ADC_AWD_CHANNEL_7_INJ (2) + * @arg @ref LL_ADC_AWD_CHANNEL_7_REG_INJ (2) + * @arg @ref LL_ADC_AWD_CHANNEL_8_REG (2) + * @arg @ref LL_ADC_AWD_CHANNEL_8_INJ (2) + * @arg @ref LL_ADC_AWD_CHANNEL_8_REG_INJ (2) + * @arg @ref LL_ADC_AWD_CHANNEL_9_REG (2) + * @arg @ref LL_ADC_AWD_CHANNEL_9_INJ (2) + * @arg @ref LL_ADC_AWD_CHANNEL_9_REG_INJ (2) + * @arg @ref LL_ADC_AWD_CHANNEL_10_REG (2) + * @arg @ref LL_ADC_AWD_CHANNEL_10_INJ (2) + * @arg @ref LL_ADC_AWD_CHANNEL_10_REG_INJ (2) + * @arg @ref LL_ADC_AWD_CHANNEL_11_REG (2) + * @arg @ref LL_ADC_AWD_CHANNEL_11_INJ (2) + * @arg @ref LL_ADC_AWD_CHANNEL_11_REG_INJ (2) + * @arg @ref LL_ADC_AWD_CHANNEL_12_REG (2) + * @arg @ref LL_ADC_AWD_CHANNEL_12_INJ (2) + * @arg @ref LL_ADC_AWD_CHANNEL_12_REG_INJ (2) + * @arg @ref LL_ADC_AWD_CHANNEL_13_REG (3) + * @arg @ref LL_ADC_AWD_CHANNEL_13_INJ (3) + * @arg @ref LL_ADC_AWD_CHANNEL_13_REG_INJ (3) + * @arg @ref LL_ADC_AWD_CHANNEL_14_REG (3) + * @arg @ref LL_ADC_AWD_CHANNEL_14_INJ (3) + * @arg @ref LL_ADC_AWD_CHANNEL_14_REG_INJ (3) + * @arg @ref LL_ADC_AWD_CHANNEL_15_REG (3) + * @arg @ref LL_ADC_AWD_CHANNEL_15_INJ (3) + * @arg @ref LL_ADC_AWD_CHANNEL_15_REG_INJ (3) + * @arg @ref LL_ADC_AWD_CHANNEL_16_REG (3) + * @arg @ref LL_ADC_AWD_CHANNEL_16_INJ (3) + * @arg @ref LL_ADC_AWD_CHANNEL_16_REG_INJ (3) + * @arg @ref LL_ADC_AWD_CHANNEL_17_REG (3) + * @arg @ref LL_ADC_AWD_CHANNEL_17_INJ (3) + * @arg @ref LL_ADC_AWD_CHANNEL_17_REG_INJ (3) + * @arg @ref LL_ADC_AWD_CHANNEL_18_REG (3) + * @arg @ref LL_ADC_AWD_CHANNEL_18_INJ (3) + * @arg @ref LL_ADC_AWD_CHANNEL_18_REG_INJ (3) + * @arg @ref LL_ADC_AWD_CHANNEL_19_REG (3) + * @arg @ref LL_ADC_AWD_CHANNEL_19_INJ (3) + * @arg @ref LL_ADC_AWD_CHANNEL_19_REG_INJ (3) + * @arg @ref LL_ADC_AWD_CHANNEL_20_REG (3) + * @arg @ref LL_ADC_AWD_CHANNEL_20_INJ (3) + * @arg @ref LL_ADC_AWD_CHANNEL_20_REG_INJ (3) + * @arg @ref LL_ADC_AWD_CHANNEL_21_REG (3) + * @arg @ref LL_ADC_AWD_CHANNEL_21_INJ (3) + * @arg @ref LL_ADC_AWD_CHANNEL_21_REG_INJ (3) + * @arg @ref LL_ADC_AWD_CHANNEL_22_REG (1) + * @arg @ref LL_ADC_AWD_CHANNEL_22_INJ (1) + * @arg @ref LL_ADC_AWD_CHANNEL_22_REG_INJ (1) + * @arg @ref LL_ADC_AWD_CHANNEL_23_REG (1) + * @arg @ref LL_ADC_AWD_CHANNEL_23_INJ (1) + * @arg @ref LL_ADC_AWD_CHANNEL_23_REG_INJ (1) + * @arg @ref LL_ADC_AWD_CHANNEL_24_REG (1) + * @arg @ref LL_ADC_AWD_CHANNEL_24_INJ (1) + * @arg @ref LL_ADC_AWD_CHANNEL_24_REG_INJ (1) + * @arg @ref LL_ADC_AWD_CHANNEL_25_REG (1) + * @arg @ref LL_ADC_AWD_CHANNEL_25_INJ (1) + * @arg @ref LL_ADC_AWD_CHANNEL_25_REG_INJ (1) + * @arg @ref LL_ADC_AWD_CHANNEL_26_REG (3) + * @arg @ref LL_ADC_AWD_CHANNEL_26_INJ (3) + * @arg @ref LL_ADC_AWD_CHANNEL_26_REG_INJ (3) + * @arg @ref LL_ADC_AWD_CHANNEL_27_REG (3)(4) + * @arg @ref LL_ADC_AWD_CHANNEL_27_INJ (3)(4) + * @arg @ref LL_ADC_AWD_CHANNEL_27_REG_INJ (3)(4) + * @arg @ref LL_ADC_AWD_CHANNEL_28_REG (3)(4) + * @arg @ref LL_ADC_AWD_CHANNEL_28_INJ (3)(4) + * @arg @ref LL_ADC_AWD_CHANNEL_28_REG_INJ (3)(4) + * @arg @ref LL_ADC_AWD_CHANNEL_29_REG (3)(4) + * @arg @ref LL_ADC_AWD_CHANNEL_29_INJ (3)(4) + * @arg @ref LL_ADC_AWD_CHANNEL_29_REG_INJ (3)(4) + * @arg @ref LL_ADC_AWD_CHANNEL_30_REG (3)(4) + * @arg @ref LL_ADC_AWD_CHANNEL_30_INJ (3)(4) + * @arg @ref LL_ADC_AWD_CHANNEL_30_REG_INJ (3)(4) + * @arg @ref LL_ADC_AWD_CHANNEL_31_REG (3)(4) + * @arg @ref LL_ADC_AWD_CHANNEL_31_INJ (3)(4) + * @arg @ref LL_ADC_AWD_CHANNEL_31_REG_INJ (3)(4) + * @arg @ref LL_ADC_AWD_CH_VREFINT_REG (3) + * @arg @ref LL_ADC_AWD_CH_VREFINT_INJ (3) + * @arg @ref LL_ADC_AWD_CH_VREFINT_REG_INJ (3) + * @arg @ref LL_ADC_AWD_CH_TEMPSENSOR_REG (3) + * @arg @ref LL_ADC_AWD_CH_TEMPSENSOR_INJ (3) + * @arg @ref LL_ADC_AWD_CH_TEMPSENSOR_REG_INJ (3) + * @arg @ref LL_ADC_AWD_CH_VCOMP_REG (3) + * @arg @ref LL_ADC_AWD_CH_VCOMP_INJ (3) + * @arg @ref LL_ADC_AWD_CH_VCOMP_REG_INJ (3) + * @arg @ref LL_ADC_AWD_CH_VOPAMP1_REG (3)(5) + * @arg @ref LL_ADC_AWD_CH_VOPAMP1_INJ (3)(5) + * @arg @ref LL_ADC_AWD_CH_VOPAMP1_REG_INJ (3)(5) + * @arg @ref LL_ADC_AWD_CH_VOPAMP2_REG (3)(5) + * @arg @ref LL_ADC_AWD_CH_VOPAMP2_INJ (3)(5) + * @arg @ref LL_ADC_AWD_CH_VOPAMP2_REG_INJ (3)(5) + * @arg @ref LL_ADC_AWD_CH_VOPAMP3_REG (3)(5) + * @arg @ref LL_ADC_AWD_CH_VOPAMP3_INJ (3)(5) + * @arg @ref LL_ADC_AWD_CH_VOPAMP3_REG_INJ (3)(5) + * + * (1) On STM32L1, connection via routing interface (RI) specificity: fast channel (channel routed directly to ADC switch matrix).\n + * (2) On STM32L1, for devices with feature 'channels banks' available: Channel different in bank A and bank B.\n + * (3) On STM32L1, for devices with feature 'channels banks' available: Channel common to both bank A and bank B.\n + * (4) On STM32L1, parameter not available on all devices: only on STM32L1 Cat.4 and Cat.5.\n + * (5) On STM32L1, parameter not available on all devices: OPAMP1 and OPAMP2 available only on STM32L1 Cat.3, Cat.4 and Cat.5, OPAMP3 available only on STM32L1 Cat.4 and Cat.5 + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetAnalogWDMonitChannels(ADC_TypeDef *ADCx, uint32_t AWDChannelGroup) +{ + MODIFY_REG(ADCx->CR1, + (ADC_CR1_AWDEN | ADC_CR1_JAWDEN | ADC_CR1_AWDSGL | ADC_CR1_AWDCH), + AWDChannelGroup); +} + +/** + * @brief Get ADC analog watchdog monitored channel. + * @note Usage of the returned channel number: + * - To reinject this channel into another function LL_ADC_xxx: + * the returned channel number is only partly formatted on definition + * of literals LL_ADC_CHANNEL_x. Therefore, it has to be compared + * with parts of literals LL_ADC_CHANNEL_x or using + * helper macro @ref __LL_ADC_CHANNEL_TO_DECIMAL_NB(). + * Then the selected literal LL_ADC_CHANNEL_x can be used + * as parameter for another function. + * - To get the channel number in decimal format: + * process the returned value with the helper macro + * @ref __LL_ADC_CHANNEL_TO_DECIMAL_NB(). + * Applicable only when the analog watchdog is set to monitor + * one channel. + * @note On this STM32 serie, there is only 1 kind of analog watchdog + * instance: + * - AWD standard (instance AWD1): + * - channels monitored: can monitor 1 channel or all channels. + * - groups monitored: ADC groups regular and-or injected. + * - resolution: resolution is not limited (corresponds to + * ADC resolution configured). + * @rmtoll CR1 AWD1CH LL_ADC_GetAnalogWDMonitChannels\n + * CR1 AWD1SGL LL_ADC_GetAnalogWDMonitChannels\n + * CR1 AWD1EN LL_ADC_GetAnalogWDMonitChannels + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_AWD_DISABLE + * @arg @ref LL_ADC_AWD_ALL_CHANNELS_REG + * @arg @ref LL_ADC_AWD_ALL_CHANNELS_INJ + * @arg @ref LL_ADC_AWD_ALL_CHANNELS_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_0_REG (2) + * @arg @ref LL_ADC_AWD_CHANNEL_0_INJ (2) + * @arg @ref LL_ADC_AWD_CHANNEL_0_REG_INJ (2) + * @arg @ref LL_ADC_AWD_CHANNEL_1_REG (2) + * @arg @ref LL_ADC_AWD_CHANNEL_1_INJ (2) + * @arg @ref LL_ADC_AWD_CHANNEL_1_REG_INJ (2) + * @arg @ref LL_ADC_AWD_CHANNEL_2_REG (2) + * @arg @ref LL_ADC_AWD_CHANNEL_2_INJ (2) + * @arg @ref LL_ADC_AWD_CHANNEL_2_REG_INJ (2) + * @arg @ref LL_ADC_AWD_CHANNEL_3_REG (2) + * @arg @ref LL_ADC_AWD_CHANNEL_3_INJ (2) + * @arg @ref LL_ADC_AWD_CHANNEL_3_REG_INJ (2) + * @arg @ref LL_ADC_AWD_CHANNEL_4_REG (1) + * @arg @ref LL_ADC_AWD_CHANNEL_4_INJ (1) + * @arg @ref LL_ADC_AWD_CHANNEL_4_REG_INJ (1) + * @arg @ref LL_ADC_AWD_CHANNEL_5_REG (1) + * @arg @ref LL_ADC_AWD_CHANNEL_5_INJ (1) + * @arg @ref LL_ADC_AWD_CHANNEL_5_REG_INJ (1) + * @arg @ref LL_ADC_AWD_CHANNEL_6_REG (2) + * @arg @ref LL_ADC_AWD_CHANNEL_6_INJ (2) + * @arg @ref LL_ADC_AWD_CHANNEL_6_REG_INJ (2) + * @arg @ref LL_ADC_AWD_CHANNEL_7_REG (2) + * @arg @ref LL_ADC_AWD_CHANNEL_7_INJ (2) + * @arg @ref LL_ADC_AWD_CHANNEL_7_REG_INJ (2) + * @arg @ref LL_ADC_AWD_CHANNEL_8_REG (2) + * @arg @ref LL_ADC_AWD_CHANNEL_8_INJ (2) + * @arg @ref LL_ADC_AWD_CHANNEL_8_REG_INJ (2) + * @arg @ref LL_ADC_AWD_CHANNEL_9_REG (2) + * @arg @ref LL_ADC_AWD_CHANNEL_9_INJ (2) + * @arg @ref LL_ADC_AWD_CHANNEL_9_REG_INJ (2) + * @arg @ref LL_ADC_AWD_CHANNEL_10_REG (2) + * @arg @ref LL_ADC_AWD_CHANNEL_10_INJ (2) + * @arg @ref LL_ADC_AWD_CHANNEL_10_REG_INJ (2) + * @arg @ref LL_ADC_AWD_CHANNEL_11_REG (2) + * @arg @ref LL_ADC_AWD_CHANNEL_11_INJ (2) + * @arg @ref LL_ADC_AWD_CHANNEL_11_REG_INJ (2) + * @arg @ref LL_ADC_AWD_CHANNEL_12_REG (2) + * @arg @ref LL_ADC_AWD_CHANNEL_12_INJ (2) + * @arg @ref LL_ADC_AWD_CHANNEL_12_REG_INJ (2) + * @arg @ref LL_ADC_AWD_CHANNEL_13_REG (3) + * @arg @ref LL_ADC_AWD_CHANNEL_13_INJ (3) + * @arg @ref LL_ADC_AWD_CHANNEL_13_REG_INJ (3) + * @arg @ref LL_ADC_AWD_CHANNEL_14_REG (3) + * @arg @ref LL_ADC_AWD_CHANNEL_14_INJ (3) + * @arg @ref LL_ADC_AWD_CHANNEL_14_REG_INJ (3) + * @arg @ref LL_ADC_AWD_CHANNEL_15_REG (3) + * @arg @ref LL_ADC_AWD_CHANNEL_15_INJ (3) + * @arg @ref LL_ADC_AWD_CHANNEL_15_REG_INJ (3) + * @arg @ref LL_ADC_AWD_CHANNEL_16_REG (3) + * @arg @ref LL_ADC_AWD_CHANNEL_16_INJ (3) + * @arg @ref LL_ADC_AWD_CHANNEL_16_REG_INJ (3) + * @arg @ref LL_ADC_AWD_CHANNEL_17_REG (3) + * @arg @ref LL_ADC_AWD_CHANNEL_17_INJ (3) + * @arg @ref LL_ADC_AWD_CHANNEL_17_REG_INJ (3) + * @arg @ref LL_ADC_AWD_CHANNEL_18_REG (3) + * @arg @ref LL_ADC_AWD_CHANNEL_18_INJ (3) + * @arg @ref LL_ADC_AWD_CHANNEL_18_REG_INJ (3) + * @arg @ref LL_ADC_AWD_CHANNEL_19_REG (3) + * @arg @ref LL_ADC_AWD_CHANNEL_19_INJ (3) + * @arg @ref LL_ADC_AWD_CHANNEL_19_REG_INJ (3) + * @arg @ref LL_ADC_AWD_CHANNEL_20_REG (3) + * @arg @ref LL_ADC_AWD_CHANNEL_20_INJ (3) + * @arg @ref LL_ADC_AWD_CHANNEL_20_REG_INJ (3) + * @arg @ref LL_ADC_AWD_CHANNEL_21_REG (3) + * @arg @ref LL_ADC_AWD_CHANNEL_21_INJ (3) + * @arg @ref LL_ADC_AWD_CHANNEL_21_REG_INJ (3) + * @arg @ref LL_ADC_AWD_CHANNEL_22_REG (1) + * @arg @ref LL_ADC_AWD_CHANNEL_22_INJ (1) + * @arg @ref LL_ADC_AWD_CHANNEL_22_REG_INJ (1) + * @arg @ref LL_ADC_AWD_CHANNEL_23_REG (1) + * @arg @ref LL_ADC_AWD_CHANNEL_23_INJ (1) + * @arg @ref LL_ADC_AWD_CHANNEL_23_REG_INJ (1) + * @arg @ref LL_ADC_AWD_CHANNEL_24_REG (1) + * @arg @ref LL_ADC_AWD_CHANNEL_24_INJ (1) + * @arg @ref LL_ADC_AWD_CHANNEL_24_REG_INJ (1) + * @arg @ref LL_ADC_AWD_CHANNEL_25_REG (1) + * @arg @ref LL_ADC_AWD_CHANNEL_25_INJ (1) + * @arg @ref LL_ADC_AWD_CHANNEL_25_REG_INJ (1) + * @arg @ref LL_ADC_AWD_CHANNEL_26_REG (3) + * @arg @ref LL_ADC_AWD_CHANNEL_26_INJ (3) + * @arg @ref LL_ADC_AWD_CHANNEL_26_REG_INJ (3) + * @arg @ref LL_ADC_AWD_CHANNEL_27_REG (3)(4) + * @arg @ref LL_ADC_AWD_CHANNEL_27_INJ (3)(4) + * @arg @ref LL_ADC_AWD_CHANNEL_27_REG_INJ (3)(4) + * @arg @ref LL_ADC_AWD_CHANNEL_28_REG (3)(4) + * @arg @ref LL_ADC_AWD_CHANNEL_28_INJ (3)(4) + * @arg @ref LL_ADC_AWD_CHANNEL_28_REG_INJ (3)(4) + * @arg @ref LL_ADC_AWD_CHANNEL_29_REG (3)(4) + * @arg @ref LL_ADC_AWD_CHANNEL_29_INJ (3)(4) + * @arg @ref LL_ADC_AWD_CHANNEL_29_REG_INJ (3)(4) + * @arg @ref LL_ADC_AWD_CHANNEL_30_REG (3)(4) + * @arg @ref LL_ADC_AWD_CHANNEL_30_INJ (3)(4) + * @arg @ref LL_ADC_AWD_CHANNEL_30_REG_INJ (3)(4) + * @arg @ref LL_ADC_AWD_CHANNEL_31_REG (3)(4) + * @arg @ref LL_ADC_AWD_CHANNEL_31_INJ (3)(4) + * @arg @ref LL_ADC_AWD_CHANNEL_31_REG_INJ (3)(4) + * + * (1) On STM32L1, connection via routing interface (RI) specificity: fast channel (channel routed directly to ADC switch matrix).\n + * (2) On STM32L1, for devices with feature 'channels banks' available: Channel different in bank A and bank B.\n + * (3) On STM32L1, for devices with feature 'channels banks' available: Channel common to both bank A and bank B.\n + * (4) On STM32L1, parameter not available on all devices: only on STM32L1 Cat.4 and Cat.5. + */ +__STATIC_INLINE uint32_t LL_ADC_GetAnalogWDMonitChannels(ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CR1, (ADC_CR1_AWDEN | ADC_CR1_JAWDEN | ADC_CR1_AWDSGL | ADC_CR1_AWDCH))); +} + +/** + * @brief Set ADC analog watchdog threshold value of threshold + * high or low. + * @note In case of ADC resolution different of 12 bits, + * analog watchdog thresholds data require a specific shift. + * Use helper macro @ref __LL_ADC_ANALOGWD_SET_THRESHOLD_RESOLUTION(). + * @note On this STM32 serie, there is only 1 kind of analog watchdog + * instance: + * - AWD standard (instance AWD1): + * - channels monitored: can monitor 1 channel or all channels. + * - groups monitored: ADC groups regular and-or injected. + * - resolution: resolution is not limited (corresponds to + * ADC resolution configured). + * @rmtoll HTR HT LL_ADC_SetAnalogWDThresholds\n + * LTR LT LL_ADC_SetAnalogWDThresholds + * @param ADCx ADC instance + * @param AWDThresholdsHighLow This parameter can be one of the following values: + * @arg @ref LL_ADC_AWD_THRESHOLD_HIGH + * @arg @ref LL_ADC_AWD_THRESHOLD_LOW + * @param AWDThresholdValue: Value between Min_Data=0x000 and Max_Data=0xFFF + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetAnalogWDThresholds(ADC_TypeDef *ADCx, uint32_t AWDThresholdsHighLow, uint32_t AWDThresholdValue) +{ + register uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->HTR, AWDThresholdsHighLow); + + MODIFY_REG(*preg, + ADC_HTR_HT, + AWDThresholdValue); +} + +/** + * @brief Get ADC analog watchdog threshold value of threshold high or + * threshold low. + * @note In case of ADC resolution different of 12 bits, + * analog watchdog thresholds data require a specific shift. + * Use helper macro @ref __LL_ADC_ANALOGWD_GET_THRESHOLD_RESOLUTION(). + * @rmtoll HTR HT LL_ADC_GetAnalogWDThresholds\n + * LTR LT LL_ADC_GetAnalogWDThresholds + * @param ADCx ADC instance + * @param AWDThresholdsHighLow This parameter can be one of the following values: + * @arg @ref LL_ADC_AWD_THRESHOLD_HIGH + * @arg @ref LL_ADC_AWD_THRESHOLD_LOW + * @retval Value between Min_Data=0x000 and Max_Data=0xFFF +*/ +__STATIC_INLINE uint32_t LL_ADC_GetAnalogWDThresholds(ADC_TypeDef *ADCx, uint32_t AWDThresholdsHighLow) +{ + register uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->HTR, AWDThresholdsHighLow); + + return (uint32_t)(READ_BIT(*preg, ADC_HTR_HT)); +} + +/** + * @} + */ + +/** @defgroup ADC_LL_EF_Operation_ADC_Instance Operation on ADC hierarchical scope: ADC instance + * @{ + */ + +/** + * @brief Enable the selected ADC instance. + * @note On this STM32 serie, after ADC enable, a delay for + * ADC internal analog stabilization is required before performing a + * ADC conversion start. + * Refer to device datasheet, parameter tSTAB. + * @note Due to the latency introduced by the synchronization between + * two clock domains (ADC clock source asynchronous), + * some hardware constraints must be respected: + * - ADC must be enabled (@ref LL_ADC_Enable() ) only + * when ADC is not ready to convert. + * - ADC must be disabled (@ref LL_ADC_Disable() ) only + * when ADC is ready to convert. + * Status of ADC ready to convert can be checked using function + * @ref LL_ADC_IsActiveFlag_ADRDY(). + * @rmtoll CR2 ADON LL_ADC_Enable + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_Enable(ADC_TypeDef *ADCx) +{ + SET_BIT(ADCx->CR2, ADC_CR2_ADON); +} + +/** + * @brief Disable the selected ADC instance. + * @note Due to the latency introduced by the synchronization between + * two clock domains (ADC clock source asynchronous), + * some hardware constraints must be respected: + * - ADC must be enabled (@ref LL_ADC_Enable() ) only + * when ADC is not ready to convert. + * - ADC must be disabled (@ref LL_ADC_Disable() ) only + * when ADC is ready to convert. + * Status of ADC ready to convert can be checked using function + * @ref LL_ADC_IsActiveFlag_ADRDY(). + * @rmtoll CR2 ADON LL_ADC_Disable + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_Disable(ADC_TypeDef *ADCx) +{ + CLEAR_BIT(ADCx->CR2, ADC_CR2_ADON); +} + +/** + * @brief Get the selected ADC instance enable state. + * @rmtoll CR2 ADON LL_ADC_IsEnabled + * @param ADCx ADC instance + * @retval 0: ADC is disabled, 1: ADC is enabled. + */ +__STATIC_INLINE uint32_t LL_ADC_IsEnabled(ADC_TypeDef *ADCx) +{ + return (READ_BIT(ADCx->CR2, ADC_CR2_ADON) == (ADC_CR2_ADON)); +} + +/** + * @} + */ + +/** @defgroup ADC_LL_EF_Operation_ADC_Group_Regular Operation on ADC hierarchical scope: group regular + * @{ + */ + +/** + * @brief Start ADC group regular conversion. + * @note On this STM32 serie, this function is relevant only for + * internal trigger (SW start), not for external trigger: + * - If ADC trigger has been set to software start, ADC conversion + * starts immediately. + * - If ADC trigger has been set to external trigger, ADC conversion + * start must be performed using function + * @ref LL_ADC_REG_StartConversionExtTrig(). + * (if external trigger edge would have been set during ADC other + * settings, ADC conversion would start at trigger event + * as soon as ADC is enabled). + * @rmtoll CR2 SWSTART LL_ADC_REG_StartConversionSWStart + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_REG_StartConversionSWStart(ADC_TypeDef *ADCx) +{ + SET_BIT(ADCx->CR2, ADC_CR2_SWSTART); +} + +/** + * @brief Start ADC group regular conversion from external trigger. + * @note ADC conversion will start at next trigger event (on the selected + * trigger edge) following the ADC start conversion command. + * @note On this STM32 serie, this function is relevant for + * ADC conversion start from external trigger. + * If internal trigger (SW start) is needed, perform ADC conversion + * start using function @ref LL_ADC_REG_StartConversionSWStart(). + * @rmtoll CR2 EXTEN LL_ADC_REG_StartConversionExtTrig + * @param ExternalTriggerEdge This parameter can be one of the following values: + * @arg @ref LL_ADC_REG_TRIG_EXT_RISING + * @arg @ref LL_ADC_REG_TRIG_EXT_FALLING + * @arg @ref LL_ADC_REG_TRIG_EXT_RISINGFALLING + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_REG_StartConversionExtTrig(ADC_TypeDef *ADCx, uint32_t ExternalTriggerEdge) +{ + SET_BIT(ADCx->CR2, ExternalTriggerEdge); +} + +/** + * @brief Stop ADC group regular conversion from external trigger. + * @note No more ADC conversion will start at next trigger event + * following the ADC stop conversion command. + * If a conversion is on-going, it will be completed. + * @note On this STM32 serie, there is no specific command + * to stop a conversion on-going or to stop ADC converting + * in continuous mode. These actions can be performed + * using function @ref LL_ADC_Disable(). + * @rmtoll CR2 EXTEN LL_ADC_REG_StopConversionExtTrig + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_REG_StopConversionExtTrig(ADC_TypeDef *ADCx) +{ + CLEAR_BIT(ADCx->CR2, ADC_CR2_EXTEN); +} + +/** + * @brief Get ADC group regular conversion data, range fit for + * all ADC configurations: all ADC resolutions and + * all oversampling increased data width (for devices + * with feature oversampling). + * @rmtoll DR RDATA LL_ADC_REG_ReadConversionData32 + * @param ADCx ADC instance + * @retval Value between Min_Data=0x00000000 and Max_Data=0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_ADC_REG_ReadConversionData32(ADC_TypeDef *ADCx) +{ + return (uint16_t)(READ_BIT(ADCx->DR, ADC_DR_DATA)); +} + +/** + * @brief Get ADC group regular conversion data, range fit for + * ADC resolution 12 bits. + * @note For devices with feature oversampling: Oversampling + * can increase data width, function for extended range + * may be needed: @ref LL_ADC_REG_ReadConversionData32. + * @rmtoll DR RDATA LL_ADC_REG_ReadConversionData12 + * @param ADCx ADC instance + * @retval Value between Min_Data=0x000 and Max_Data=0xFFF + */ +__STATIC_INLINE uint16_t LL_ADC_REG_ReadConversionData12(ADC_TypeDef *ADCx) +{ + return (uint16_t)(READ_BIT(ADCx->DR, ADC_DR_DATA)); +} + +/** + * @brief Get ADC group regular conversion data, range fit for + * ADC resolution 10 bits. + * @note For devices with feature oversampling: Oversampling + * can increase data width, function for extended range + * may be needed: @ref LL_ADC_REG_ReadConversionData32. + * @rmtoll DR RDATA LL_ADC_REG_ReadConversionData10 + * @param ADCx ADC instance + * @retval Value between Min_Data=0x000 and Max_Data=0x3FF + */ +__STATIC_INLINE uint16_t LL_ADC_REG_ReadConversionData10(ADC_TypeDef *ADCx) +{ + return (uint16_t)(READ_BIT(ADCx->DR, ADC_DR_DATA)); +} + +/** + * @brief Get ADC group regular conversion data, range fit for + * ADC resolution 8 bits. + * @note For devices with feature oversampling: Oversampling + * can increase data width, function for extended range + * may be needed: @ref LL_ADC_REG_ReadConversionData32. + * @rmtoll DR RDATA LL_ADC_REG_ReadConversionData8 + * @param ADCx ADC instance + * @retval Value between Min_Data=0x00 and Max_Data=0xFF + */ +__STATIC_INLINE uint8_t LL_ADC_REG_ReadConversionData8(ADC_TypeDef *ADCx) +{ + return (uint16_t)(READ_BIT(ADCx->DR, ADC_DR_DATA)); +} + +/** + * @brief Get ADC group regular conversion data, range fit for + * ADC resolution 6 bits. + * @note For devices with feature oversampling: Oversampling + * can increase data width, function for extended range + * may be needed: @ref LL_ADC_REG_ReadConversionData32. + * @rmtoll DR RDATA LL_ADC_REG_ReadConversionData6 + * @param ADCx ADC instance + * @retval Value between Min_Data=0x00 and Max_Data=0x3F + */ +__STATIC_INLINE uint8_t LL_ADC_REG_ReadConversionData6(ADC_TypeDef *ADCx) +{ + return (uint16_t)(READ_BIT(ADCx->DR, ADC_DR_DATA)); +} + +/** + * @} + */ + +/** @defgroup ADC_LL_EF_Operation_ADC_Group_Injected Operation on ADC hierarchical scope: group injected + * @{ + */ + +/** + * @brief Start ADC group injected conversion. + * @note On this STM32 serie, this function is relevant only for + * internal trigger (SW start), not for external trigger: + * - If ADC trigger has been set to software start, ADC conversion + * starts immediately. + * - If ADC trigger has been set to external trigger, ADC conversion + * start must be performed using function + * @ref LL_ADC_INJ_StartConversionExtTrig(). + * (if external trigger edge would have been set during ADC other + * settings, ADC conversion would start at trigger event + * as soon as ADC is enabled). + * @rmtoll CR2 JSWSTART LL_ADC_INJ_StartConversionSWStart + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_INJ_StartConversionSWStart(ADC_TypeDef *ADCx) +{ + SET_BIT(ADCx->CR2, ADC_CR2_JSWSTART); +} + +/** + * @brief Start ADC group injected conversion from external trigger. + * @note ADC conversion will start at next trigger event (on the selected + * trigger edge) following the ADC start conversion command. + * @note On this STM32 serie, this function is relevant for + * ADC conversion start from external trigger. + * If internal trigger (SW start) is needed, perform ADC conversion + * start using function @ref LL_ADC_INJ_StartConversionSWStart(). + * @rmtoll CR2 JEXTEN LL_ADC_INJ_StartConversionExtTrig + * @param ExternalTriggerEdge This parameter can be one of the following values: + * @arg @ref LL_ADC_INJ_TRIG_EXT_RISING + * @arg @ref LL_ADC_INJ_TRIG_EXT_FALLING + * @arg @ref LL_ADC_INJ_TRIG_EXT_RISINGFALLING + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_INJ_StartConversionExtTrig(ADC_TypeDef *ADCx, uint32_t ExternalTriggerEdge) +{ + SET_BIT(ADCx->CR2, ExternalTriggerEdge); +} + +/** + * @brief Stop ADC group injected conversion from external trigger. + * @note No more ADC conversion will start at next trigger event + * following the ADC stop conversion command. + * If a conversion is on-going, it will be completed. + * @note On this STM32 serie, there is no specific command + * to stop a conversion on-going or to stop ADC converting + * in continuous mode. These actions can be performed + * using function @ref LL_ADC_Disable(). + * @rmtoll CR2 JEXTEN LL_ADC_INJ_StopConversionExtTrig + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_INJ_StopConversionExtTrig(ADC_TypeDef *ADCx) +{ + CLEAR_BIT(ADCx->CR2, ADC_CR2_JEXTEN); +} + +/** + * @brief Get ADC group regular conversion data, range fit for + * all ADC configurations: all ADC resolutions and + * all oversampling increased data width (for devices + * with feature oversampling). + * @rmtoll JDR1 JDATA LL_ADC_INJ_ReadConversionData32\n + * JDR2 JDATA LL_ADC_INJ_ReadConversionData32\n + * JDR3 JDATA LL_ADC_INJ_ReadConversionData32\n + * JDR4 JDATA LL_ADC_INJ_ReadConversionData32 + * @param ADCx ADC instance + * @param Rank This parameter can be one of the following values: + * @arg @ref LL_ADC_INJ_RANK_1 + * @arg @ref LL_ADC_INJ_RANK_2 + * @arg @ref LL_ADC_INJ_RANK_3 + * @arg @ref LL_ADC_INJ_RANK_4 + * @retval Value between Min_Data=0x00000000 and Max_Data=0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_ADC_INJ_ReadConversionData32(ADC_TypeDef *ADCx, uint32_t Rank) +{ + register uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->JDR1, __ADC_MASK_SHIFT(Rank, ADC_INJ_JDRX_REGOFFSET_MASK)); + + return (uint32_t)(READ_BIT(*preg, + ADC_JDR1_JDATA) + ); +} + +/** + * @brief Get ADC group injected conversion data, range fit for + * ADC resolution 12 bits. + * @note For devices with feature oversampling: Oversampling + * can increase data width, function for extended range + * may be needed: @ref LL_ADC_INJ_ReadConversionData32. + * @rmtoll JDR1 JDATA LL_ADC_INJ_ReadConversionData12\n + * JDR2 JDATA LL_ADC_INJ_ReadConversionData12\n + * JDR3 JDATA LL_ADC_INJ_ReadConversionData12\n + * JDR4 JDATA LL_ADC_INJ_ReadConversionData12 + * @param ADCx ADC instance + * @param Rank This parameter can be one of the following values: + * @arg @ref LL_ADC_INJ_RANK_1 + * @arg @ref LL_ADC_INJ_RANK_2 + * @arg @ref LL_ADC_INJ_RANK_3 + * @arg @ref LL_ADC_INJ_RANK_4 + * @retval Value between Min_Data=0x000 and Max_Data=0xFFF + */ +__STATIC_INLINE uint16_t LL_ADC_INJ_ReadConversionData12(ADC_TypeDef *ADCx, uint32_t Rank) +{ + register uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->JDR1, __ADC_MASK_SHIFT(Rank, ADC_INJ_JDRX_REGOFFSET_MASK)); + + return (uint16_t)(READ_BIT(*preg, + ADC_JDR1_JDATA) + ); +} + +/** + * @brief Get ADC group injected conversion data, range fit for + * ADC resolution 10 bits. + * @note For devices with feature oversampling: Oversampling + * can increase data width, function for extended range + * may be needed: @ref LL_ADC_INJ_ReadConversionData32. + * @rmtoll JDR1 JDATA LL_ADC_INJ_ReadConversionData10\n + * JDR2 JDATA LL_ADC_INJ_ReadConversionData10\n + * JDR3 JDATA LL_ADC_INJ_ReadConversionData10\n + * JDR4 JDATA LL_ADC_INJ_ReadConversionData10 + * @param ADCx ADC instance + * @param Rank This parameter can be one of the following values: + * @arg @ref LL_ADC_INJ_RANK_1 + * @arg @ref LL_ADC_INJ_RANK_2 + * @arg @ref LL_ADC_INJ_RANK_3 + * @arg @ref LL_ADC_INJ_RANK_4 + * @retval Value between Min_Data=0x000 and Max_Data=0x3FF + */ +__STATIC_INLINE uint16_t LL_ADC_INJ_ReadConversionData10(ADC_TypeDef *ADCx, uint32_t Rank) +{ + register uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->JDR1, __ADC_MASK_SHIFT(Rank, ADC_INJ_JDRX_REGOFFSET_MASK)); + + return (uint16_t)(READ_BIT(*preg, + ADC_JDR1_JDATA) + ); +} + +/** + * @brief Get ADC group injected conversion data, range fit for + * ADC resolution 8 bits. + * @note For devices with feature oversampling: Oversampling + * can increase data width, function for extended range + * may be needed: @ref LL_ADC_INJ_ReadConversionData32. + * @rmtoll JDR1 JDATA LL_ADC_INJ_ReadConversionData8\n + * JDR2 JDATA LL_ADC_INJ_ReadConversionData8\n + * JDR3 JDATA LL_ADC_INJ_ReadConversionData8\n + * JDR4 JDATA LL_ADC_INJ_ReadConversionData8 + * @param ADCx ADC instance + * @param Rank This parameter can be one of the following values: + * @arg @ref LL_ADC_INJ_RANK_1 + * @arg @ref LL_ADC_INJ_RANK_2 + * @arg @ref LL_ADC_INJ_RANK_3 + * @arg @ref LL_ADC_INJ_RANK_4 + * @retval Value between Min_Data=0x00 and Max_Data=0xFF + */ +__STATIC_INLINE uint8_t LL_ADC_INJ_ReadConversionData8(ADC_TypeDef *ADCx, uint32_t Rank) +{ + register uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->JDR1, __ADC_MASK_SHIFT(Rank, ADC_INJ_JDRX_REGOFFSET_MASK)); + + return (uint8_t)(READ_BIT(*preg, + ADC_JDR1_JDATA) + ); +} + +/** + * @brief Get ADC group injected conversion data, range fit for + * ADC resolution 6 bits. + * @note For devices with feature oversampling: Oversampling + * can increase data width, function for extended range + * may be needed: @ref LL_ADC_INJ_ReadConversionData32. + * @rmtoll JDR1 JDATA LL_ADC_INJ_ReadConversionData6\n + * JDR2 JDATA LL_ADC_INJ_ReadConversionData6\n + * JDR3 JDATA LL_ADC_INJ_ReadConversionData6\n + * JDR4 JDATA LL_ADC_INJ_ReadConversionData6 + * @param ADCx ADC instance + * @param Rank This parameter can be one of the following values: + * @arg @ref LL_ADC_INJ_RANK_1 + * @arg @ref LL_ADC_INJ_RANK_2 + * @arg @ref LL_ADC_INJ_RANK_3 + * @arg @ref LL_ADC_INJ_RANK_4 + * @retval Value between Min_Data=0x00 and Max_Data=0x3F + */ +__STATIC_INLINE uint8_t LL_ADC_INJ_ReadConversionData6(ADC_TypeDef *ADCx, uint32_t Rank) +{ + register uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->JDR1, __ADC_MASK_SHIFT(Rank, ADC_INJ_JDRX_REGOFFSET_MASK)); + + return (uint8_t)(READ_BIT(*preg, + ADC_JDR1_JDATA) + ); +} + +/** + * @} + */ + +/** @defgroup ADC_LL_EF_FLAG_Management ADC flag management + * @{ + */ + +/** + * @brief Get flag ADC ready. + * @rmtoll SR ADONS LL_ADC_IsActiveFlag_ADRDY + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_ADRDY(ADC_TypeDef *ADCx) +{ + return (READ_BIT(ADCx->SR, LL_ADC_FLAG_ADRDY) == (LL_ADC_FLAG_ADRDY)); +} + +/** + * @brief Get flag ADC group regular end of unitary conversion + * or end of sequence conversions, depending on + * ADC configuration. + * @note To configure flag of end of conversion, + * use function @ref LL_ADC_REG_SetFlagEndOfConversion(). + * @rmtoll SR EOC LL_ADC_IsActiveFlag_EOCS + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_EOCS(ADC_TypeDef *ADCx) +{ + return (READ_BIT(ADCx->SR, LL_ADC_FLAG_EOCS) == (LL_ADC_FLAG_EOCS)); +} + +/** + * @brief Get flag ADC group regular overrun. + * @rmtoll SR OVR LL_ADC_IsActiveFlag_OVR + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_OVR(ADC_TypeDef *ADCx) +{ + return (READ_BIT(ADCx->SR, LL_ADC_FLAG_OVR) == (LL_ADC_FLAG_OVR)); +} + + +/** + * @brief Get flag ADC group injected end of sequence conversions. + * @rmtoll SR JEOC LL_ADC_IsActiveFlag_JEOS + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_JEOS(ADC_TypeDef *ADCx) +{ + /* Note: on this STM32 serie, there is no flag ADC group injected */ + /* end of unitary conversion. */ + /* Flag noted as "JEOC" is corresponding to flag "JEOS" */ + /* in other STM32 families). */ + return (READ_BIT(ADCx->SR, LL_ADC_FLAG_JEOS) == (LL_ADC_FLAG_JEOS)); +} + +/** + * @brief Get flag ADC analog watchdog 1 flag + * @rmtoll SR AWD LL_ADC_IsActiveFlag_AWD1 + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_AWD1(ADC_TypeDef *ADCx) +{ + return (READ_BIT(ADCx->SR, LL_ADC_FLAG_AWD1) == (LL_ADC_FLAG_AWD1)); +} + +/** + * @brief Clear flag ADC group regular end of unitary conversion + * or end of sequence conversions, depending on + * ADC configuration. + * @note To configure flag of end of conversion, + * use function @ref LL_ADC_REG_SetFlagEndOfConversion(). + * @rmtoll SR EOC LL_ADC_ClearFlag_EOCS + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_ClearFlag_EOCS(ADC_TypeDef *ADCx) +{ + WRITE_REG(ADCx->SR, ~LL_ADC_FLAG_EOCS); +} + +/** + * @brief Clear flag ADC group regular overrun. + * @rmtoll SR OVR LL_ADC_ClearFlag_OVR + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_ClearFlag_OVR(ADC_TypeDef *ADCx) +{ + WRITE_REG(ADCx->SR, ~LL_ADC_FLAG_OVR); +} + + +/** + * @brief Clear flag ADC group injected end of sequence conversions. + * @rmtoll SR JEOC LL_ADC_ClearFlag_JEOS + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_ClearFlag_JEOS(ADC_TypeDef *ADCx) +{ + /* Note: on this STM32 serie, there is no flag ADC group injected */ + /* end of unitary conversion. */ + /* Flag noted as "JEOC" is corresponding to flag "JEOS" */ + /* in other STM32 families). */ + WRITE_REG(ADCx->SR, ~LL_ADC_FLAG_JEOS); +} + +/** + * @brief Clear flag ADC analog watchdog 1. + * @rmtoll SR AWD LL_ADC_ClearFlag_AWD1 + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_ClearFlag_AWD1(ADC_TypeDef *ADCx) +{ + WRITE_REG(ADCx->SR, ~LL_ADC_FLAG_AWD1); +} + +/** + * @} + */ + +/** @defgroup ADC_LL_EF_IT_Management ADC IT management + * @{ + */ + +/** + * @brief Enable interruption ADC group regular end of unitary conversion + * or end of sequence conversions, depending on + * ADC configuration. + * @note To configure flag of end of conversion, + * use function @ref LL_ADC_REG_SetFlagEndOfConversion(). + * @rmtoll CR1 EOCIE LL_ADC_EnableIT_EOCS + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_EnableIT_EOCS(ADC_TypeDef *ADCx) +{ + SET_BIT(ADCx->CR1, LL_ADC_IT_EOCS); +} + +/** + * @brief Enable ADC group regular interruption overrun. + * @rmtoll CR1 OVRIE LL_ADC_EnableIT_OVR + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_EnableIT_OVR(ADC_TypeDef *ADCx) +{ + SET_BIT(ADCx->CR1, LL_ADC_IT_OVR); +} + + +/** + * @brief Enable interruption ADC group injected end of sequence conversions. + * @rmtoll CR1 JEOCIE LL_ADC_EnableIT_JEOS + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_EnableIT_JEOS(ADC_TypeDef *ADCx) +{ + /* Note: on this STM32 serie, there is no flag ADC group injected */ + /* end of unitary conversion. */ + /* Flag noted as "JEOC" is corresponding to flag "JEOS" */ + /* in other STM32 families). */ + SET_BIT(ADCx->CR1, LL_ADC_IT_JEOS); +} + +/** + * @brief Enable interruption ADC analog watchdog 1. + * @rmtoll CR1 AWDIE LL_ADC_EnableIT_AWD1 + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_EnableIT_AWD1(ADC_TypeDef *ADCx) +{ + SET_BIT(ADCx->CR1, LL_ADC_IT_AWD1); +} + +/** + * @brief Disable interruption ADC group regular end of unitary conversion + * or end of sequence conversions, depending on + * ADC configuration. + * @note To configure flag of end of conversion, + * use function @ref LL_ADC_REG_SetFlagEndOfConversion(). + * @rmtoll CR1 EOCIE LL_ADC_DisableIT_EOCS + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_DisableIT_EOCS(ADC_TypeDef *ADCx) +{ + CLEAR_BIT(ADCx->CR1, LL_ADC_IT_EOCS); +} + +/** + * @brief Disable interruption ADC group regular overrun. + * @rmtoll CR1 OVRIE LL_ADC_DisableIT_OVR + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_DisableIT_OVR(ADC_TypeDef *ADCx) +{ + CLEAR_BIT(ADCx->CR1, LL_ADC_IT_OVR); +} + + +/** + * @brief Disable interruption ADC group injected end of sequence conversions. + * @rmtoll CR1 JEOCIE LL_ADC_EnableIT_JEOS + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_DisableIT_JEOS(ADC_TypeDef *ADCx) +{ + /* Note: on this STM32 serie, there is no flag ADC group injected */ + /* end of unitary conversion. */ + /* Flag noted as "JEOC" is corresponding to flag "JEOS" */ + /* in other STM32 families). */ + CLEAR_BIT(ADCx->CR1, LL_ADC_IT_JEOS); +} + +/** + * @brief Disable interruption ADC analog watchdog 1. + * @rmtoll CR1 AWDIE LL_ADC_EnableIT_AWD1 + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_DisableIT_AWD1(ADC_TypeDef *ADCx) +{ + CLEAR_BIT(ADCx->CR1, LL_ADC_IT_AWD1); +} + +/** + * @brief Get state of interruption ADC group regular end of unitary conversion + * or end of sequence conversions, depending on + * ADC configuration. + * @note To configure flag of end of conversion, + * use function @ref LL_ADC_REG_SetFlagEndOfConversion(). + * (0: interrupt disabled, 1: interrupt enabled) + * @rmtoll CR1 EOCIE LL_ADC_IsEnabledIT_EOCS + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_EOCS(ADC_TypeDef *ADCx) +{ + return (READ_BIT(ADCx->CR1, LL_ADC_IT_EOCS) == (LL_ADC_IT_EOCS)); +} + +/** + * @brief Get state of interruption ADC group regular overrun + * (0: interrupt disabled, 1: interrupt enabled). + * @rmtoll CR1 OVRIE LL_ADC_IsEnabledIT_OVR + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_OVR(ADC_TypeDef *ADCx) +{ + return (READ_BIT(ADCx->CR1, LL_ADC_IT_OVR) == (LL_ADC_IT_OVR)); +} + + +/** + * @brief Get state of interruption ADC group injected end of sequence conversions + * (0: interrupt disabled, 1: interrupt enabled). + * @rmtoll CR1 JEOCIE LL_ADC_EnableIT_JEOS + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_JEOS(ADC_TypeDef *ADCx) +{ + /* Note: on this STM32 serie, there is no flag ADC group injected */ + /* end of unitary conversion. */ + /* Flag noted as "JEOC" is corresponding to flag "JEOS" */ + /* in other STM32 families). */ + return (READ_BIT(ADCx->CR1, LL_ADC_IT_JEOS) == (LL_ADC_IT_JEOS)); +} + +/** + * @brief Get state of interruption ADC analog watchdog 1 + * (0: interrupt disabled, 1: interrupt enabled). + * @rmtoll CR1 AWDIE LL_ADC_EnableIT_AWD1 + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_AWD1(ADC_TypeDef *ADCx) +{ + return (READ_BIT(ADCx->CR1, LL_ADC_IT_AWD1) == (LL_ADC_IT_AWD1)); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup ADC_LL_EF_Init Initialization and de-initialization functions + * @{ + */ + +/* Initialization of some features of ADC common parameters and multimode */ +ErrorStatus LL_ADC_CommonDeInit(ADC_Common_TypeDef *ADCxy_COMMON); +ErrorStatus LL_ADC_CommonInit(ADC_Common_TypeDef *ADCxy_COMMON, LL_ADC_CommonInitTypeDef *ADC_CommonInitStruct); +void LL_ADC_CommonStructInit(LL_ADC_CommonInitTypeDef *ADC_CommonInitStruct); + +/* De-initialization of ADC instance, ADC group regular and ADC group injected */ +/* (availability of ADC group injected depends on STM32 families) */ +ErrorStatus LL_ADC_DeInit(ADC_TypeDef *ADCx); + +/* Initialization of some features of ADC instance */ +ErrorStatus LL_ADC_Init(ADC_TypeDef *ADCx, LL_ADC_InitTypeDef *ADC_InitStruct); +void LL_ADC_StructInit(LL_ADC_InitTypeDef *ADC_InitStruct); + +/* Initialization of some features of ADC instance and ADC group regular */ +ErrorStatus LL_ADC_REG_Init(ADC_TypeDef *ADCx, LL_ADC_REG_InitTypeDef *ADC_REG_InitStruct); +void LL_ADC_REG_StructInit(LL_ADC_REG_InitTypeDef *ADC_REG_InitStruct); + +/* Initialization of some features of ADC instance and ADC group injected */ +ErrorStatus LL_ADC_INJ_Init(ADC_TypeDef *ADCx, LL_ADC_INJ_InitTypeDef *ADC_INJ_InitStruct); +void LL_ADC_INJ_StructInit(LL_ADC_INJ_InitTypeDef *ADC_INJ_InitStruct); + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* ADC1 */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32L1xx_LL_ADC_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_ll_bus.h b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_ll_bus.h new file mode 100755 index 0000000..0e534f4 --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_ll_bus.h @@ -0,0 +1,1121 @@ +/** + ****************************************************************************** + * @file stm32l1xx_ll_bus.h + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief Header file of BUS LL module. + + @verbatim + ##### RCC Limitations ##### + ============================================================================== + [..] + A delay between an RCC peripheral clock enable and the effective peripheral + enabling should be taken into account in order to manage the peripheral read/write + from/to registers. + (+) This delay depends on the peripheral mapping. + (++) AHB & APB peripherals, 1 dummy read is necessary + + [..] + Workarounds: + (#) For AHB & APB peripherals, a dummy read to the peripheral register has been + inserted in each LL_{BUS}_GRP{x}_EnableClock() function. + + @endverbatim + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L1xx_LL_BUS_H +#define __STM32L1xx_LL_BUS_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx.h" + +/** @addtogroup STM32L1xx_LL_Driver + * @{ + */ + +#if defined(RCC) + +/** @defgroup BUS_LL BUS + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ + +/* Private macros ------------------------------------------------------------*/ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup BUS_LL_Exported_Constants BUS Exported Constants + * @{ + */ + +/** @defgroup BUS_LL_EC_AHB1_GRP1_PERIPH AHB1 GRP1 PERIPH + * @{ + */ +#define LL_AHB1_GRP1_PERIPH_ALL (uint32_t)0xFFFFFFFFU +#define LL_AHB1_GRP1_PERIPH_GPIOA RCC_AHBENR_GPIOAEN +#define LL_AHB1_GRP1_PERIPH_GPIOB RCC_AHBENR_GPIOBEN +#define LL_AHB1_GRP1_PERIPH_GPIOC RCC_AHBENR_GPIOCEN +#define LL_AHB1_GRP1_PERIPH_GPIOD RCC_AHBENR_GPIODEN +#if defined(GPIOE) +#define LL_AHB1_GRP1_PERIPH_GPIOE RCC_AHBENR_GPIOEEN +#endif/*GPIOE*/ +#define LL_AHB1_GRP1_PERIPH_GPIOH RCC_AHBENR_GPIOHEN +#if defined(GPIOF) +#define LL_AHB1_GRP1_PERIPH_GPIOF RCC_AHBENR_GPIOFEN +#endif/*GPIOF*/ +#if defined(GPIOG) +#define LL_AHB1_GRP1_PERIPH_GPIOG RCC_AHBENR_GPIOGEN +#endif/*GPIOG*/ +#define LL_AHB1_GRP1_PERIPH_SRAM RCC_AHBLPENR_SRAMLPEN +#define LL_AHB1_GRP1_PERIPH_CRC RCC_AHBENR_CRCEN +#define LL_AHB1_GRP1_PERIPH_FLASH RCC_AHBENR_FLITFEN +#define LL_AHB1_GRP1_PERIPH_DMA1 RCC_AHBENR_DMA1EN +#if defined(DMA2) +#define LL_AHB1_GRP1_PERIPH_DMA2 RCC_AHBENR_DMA2EN +#endif/*DMA2*/ +#if defined(AES) +#define LL_AHB1_GRP1_PERIPH_CRYP RCC_AHBENR_AESEN +#endif/*AES*/ +#if defined(FSMC_Bank1) +#define LL_AHB1_GRP1_PERIPH_FSMC RCC_AHBENR_FSMCEN +#endif/*FSMC_Bank1*/ +/** + * @} + */ + +/** @defgroup BUS_LL_EC_APB1_GRP1_PERIPH APB1 GRP1 PERIPH + * @{ + */ +#define LL_APB1_GRP1_PERIPH_ALL (uint32_t)0xFFFFFFFFU +#define LL_APB1_GRP1_PERIPH_TIM2 RCC_APB1ENR_TIM2EN +#define LL_APB1_GRP1_PERIPH_TIM3 RCC_APB1ENR_TIM3EN +#define LL_APB1_GRP1_PERIPH_TIM4 RCC_APB1ENR_TIM4EN +#if defined(TIM5) +#define LL_APB1_GRP1_PERIPH_TIM5 RCC_APB1ENR_TIM5EN +#endif /*TIM5*/ +#define LL_APB1_GRP1_PERIPH_TIM6 RCC_APB1ENR_TIM6EN +#define LL_APB1_GRP1_PERIPH_TIM7 RCC_APB1ENR_TIM7EN +#if defined(LCD) +#define LL_APB1_GRP1_PERIPH_LCD RCC_APB1ENR_LCDEN +#endif /*LCD*/ +#define LL_APB1_GRP1_PERIPH_WWDG RCC_APB1ENR_WWDGEN +#define LL_APB1_GRP1_PERIPH_SPI2 RCC_APB1ENR_SPI2EN +#if defined(SPI3) +#define LL_APB1_GRP1_PERIPH_SPI3 RCC_APB1ENR_SPI3EN +#endif /*SPI3*/ +#define LL_APB1_GRP1_PERIPH_USART2 RCC_APB1ENR_USART2EN +#define LL_APB1_GRP1_PERIPH_USART3 RCC_APB1ENR_USART3EN +#if defined(UART4) +#define LL_APB1_GRP1_PERIPH_UART4 RCC_APB1ENR_UART4EN +#endif /*UART4*/ +#if defined(UART5) +#define LL_APB1_GRP1_PERIPH_UART5 RCC_APB1ENR_UART5EN +#endif /*UART5*/ +#define LL_APB1_GRP1_PERIPH_I2C1 RCC_APB1ENR_I2C1EN +#define LL_APB1_GRP1_PERIPH_I2C2 RCC_APB1ENR_I2C2EN +#define LL_APB1_GRP1_PERIPH_USB RCC_APB1ENR_USBEN +#define LL_APB1_GRP1_PERIPH_PWR RCC_APB1ENR_PWREN +#define LL_APB1_GRP1_PERIPH_DAC1 RCC_APB1ENR_DACEN +#define LL_APB1_GRP1_PERIPH_COMP RCC_APB1ENR_COMPEN +#if defined(OPAMP) +/* Note: Peripherals COMP and OPAMP share the same clock domain */ +#define LL_APB1_GRP1_PERIPH_OPAMP LL_APB1_GRP1_PERIPH_COMP +#endif +/** + * @} + */ + +/** @defgroup BUS_LL_EC_APB2_GRP1_PERIPH APB2 GRP1 PERIPH + * @{ + */ +#define LL_APB2_GRP1_PERIPH_ALL (uint32_t)0xFFFFFFFFU +#define LL_APB2_GRP1_PERIPH_SYSCFG RCC_APB2ENR_SYSCFGEN +#define LL_APB2_GRP1_PERIPH_TIM9 RCC_APB2ENR_TIM9EN +#define LL_APB2_GRP1_PERIPH_TIM10 RCC_APB2ENR_TIM10EN +#define LL_APB2_GRP1_PERIPH_TIM11 RCC_APB2ENR_TIM11EN +#define LL_APB2_GRP1_PERIPH_ADC1 RCC_APB2ENR_ADC1EN +#if defined(SDIO) +#define LL_APB2_GRP1_PERIPH_SDIO RCC_APB2ENR_SDIOEN +#endif /*SDIO*/ +#define LL_APB2_GRP1_PERIPH_SPI1 RCC_APB2ENR_SPI1EN +#define LL_APB2_GRP1_PERIPH_USART1 RCC_APB2ENR_USART1EN +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup BUS_LL_Exported_Functions BUS Exported Functions + * @{ + */ + +/** @defgroup BUS_LL_EF_AHB1 AHB1 + * @{ + */ + +/** + * @brief Enable AHB1 peripherals clock. + * @rmtoll AHBENR GPIOAEN LL_AHB1_GRP1_EnableClock\n + * AHBENR GPIOBEN LL_AHB1_GRP1_EnableClock\n + * AHBENR GPIOCEN LL_AHB1_GRP1_EnableClock\n + * AHBENR GPIODEN LL_AHB1_GRP1_EnableClock\n + * AHBENR GPIOEEN LL_AHB1_GRP1_EnableClock\n + * AHBENR GPIOHEN LL_AHB1_GRP1_EnableClock\n + * AHBENR GPIOFEN LL_AHB1_GRP1_EnableClock\n + * AHBENR GPIOGEN LL_AHB1_GRP1_EnableClock\n + * AHBENR CRCEN LL_AHB1_GRP1_EnableClock\n + * AHBENR FLITFEN LL_AHB1_GRP1_EnableClock\n + * AHBENR DMA1EN LL_AHB1_GRP1_EnableClock\n + * AHBENR DMA2EN LL_AHB1_GRP1_EnableClock\n + * AHBENR AESEN LL_AHB1_GRP1_EnableClock\n + * AHBENR FSMCEN LL_AHB1_GRP1_EnableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOH + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOG (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_CRC + * @arg @ref LL_AHB1_GRP1_PERIPH_FLASH + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_CRYP (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_FSMC (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_AHB1_GRP1_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->AHBENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->AHBENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if AHB1 peripheral clock is enabled or not + * @rmtoll AHBENR GPIOAEN LL_AHB1_GRP1_IsEnabledClock\n + * AHBENR GPIOBEN LL_AHB1_GRP1_IsEnabledClock\n + * AHBENR GPIOCEN LL_AHB1_GRP1_IsEnabledClock\n + * AHBENR GPIODEN LL_AHB1_GRP1_IsEnabledClock\n + * AHBENR GPIOEEN LL_AHB1_GRP1_IsEnabledClock\n + * AHBENR GPIOHEN LL_AHB1_GRP1_IsEnabledClock\n + * AHBENR GPIOFEN LL_AHB1_GRP1_IsEnabledClock\n + * AHBENR GPIOGEN LL_AHB1_GRP1_IsEnabledClock\n + * AHBENR CRCEN LL_AHB1_GRP1_IsEnabledClock\n + * AHBENR FLITFEN LL_AHB1_GRP1_IsEnabledClock\n + * AHBENR DMA1EN LL_AHB1_GRP1_IsEnabledClock\n + * AHBENR DMA2EN LL_AHB1_GRP1_IsEnabledClock\n + * AHBENR AESEN LL_AHB1_GRP1_IsEnabledClock\n + * AHBENR FSMCEN LL_AHB1_GRP1_IsEnabledClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOH + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOG (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_CRC + * @arg @ref LL_AHB1_GRP1_PERIPH_FLASH + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_CRYP (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_FSMC (*) + * + * (*) value not defined in all devices. + * @retval State of Periphs (1 or 0). +*/ +__STATIC_INLINE uint32_t LL_AHB1_GRP1_IsEnabledClock(uint32_t Periphs) +{ + return (READ_BIT(RCC->AHBENR, Periphs) == Periphs); +} + +/** + * @brief Disable AHB1 peripherals clock. + * @rmtoll AHBENR GPIOAEN LL_AHB1_GRP1_DisableClock\n + * AHBENR GPIOBEN LL_AHB1_GRP1_DisableClock\n + * AHBENR GPIOCEN LL_AHB1_GRP1_DisableClock\n + * AHBENR GPIODEN LL_AHB1_GRP1_DisableClock\n + * AHBENR GPIOEEN LL_AHB1_GRP1_DisableClock\n + * AHBENR GPIOHEN LL_AHB1_GRP1_DisableClock\n + * AHBENR GPIOFEN LL_AHB1_GRP1_DisableClock\n + * AHBENR GPIOGEN LL_AHB1_GRP1_DisableClock\n + * AHBENR CRCEN LL_AHB1_GRP1_DisableClock\n + * AHBENR FLITFEN LL_AHB1_GRP1_DisableClock\n + * AHBENR DMA1EN LL_AHB1_GRP1_DisableClock\n + * AHBENR DMA2EN LL_AHB1_GRP1_DisableClock\n + * AHBENR AESEN LL_AHB1_GRP1_DisableClock\n + * AHBENR FSMCEN LL_AHB1_GRP1_DisableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOH + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOG (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_CRC + * @arg @ref LL_AHB1_GRP1_PERIPH_FLASH + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_CRYP (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_FSMC (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_AHB1_GRP1_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC->AHBENR, Periphs); +} + +/** + * @brief Force AHB1 peripherals reset. + * @rmtoll AHBRSTR GPIOARST LL_AHB1_GRP1_ForceReset\n + * AHBRSTR GPIOBRST LL_AHB1_GRP1_ForceReset\n + * AHBRSTR GPIOCRST LL_AHB1_GRP1_ForceReset\n + * AHBRSTR GPIODRST LL_AHB1_GRP1_ForceReset\n + * AHBRSTR GPIOERST LL_AHB1_GRP1_ForceReset\n + * AHBRSTR GPIOHRST LL_AHB1_GRP1_ForceReset\n + * AHBRSTR GPIOFRST LL_AHB1_GRP1_ForceReset\n + * AHBRSTR GPIOGRST LL_AHB1_GRP1_ForceReset\n + * AHBRSTR CRCRST LL_AHB1_GRP1_ForceReset\n + * AHBRSTR FLITFRST LL_AHB1_GRP1_ForceReset\n + * AHBRSTR DMA1RST LL_AHB1_GRP1_ForceReset\n + * AHBRSTR DMA2RST LL_AHB1_GRP1_ForceReset\n + * AHBRSTR AESRST LL_AHB1_GRP1_ForceReset\n + * AHBRSTR FSMCRST LL_AHB1_GRP1_ForceReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB1_GRP1_PERIPH_ALL + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOH + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOG (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_CRC + * @arg @ref LL_AHB1_GRP1_PERIPH_FLASH + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_CRYP (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_FSMC (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_AHB1_GRP1_ForceReset(uint32_t Periphs) +{ + SET_BIT(RCC->AHBRSTR, Periphs); +} + +/** + * @brief Release AHB1 peripherals reset. + * @rmtoll AHBRSTR GPIOARST LL_AHB1_GRP1_ReleaseReset\n + * AHBRSTR GPIOBRST LL_AHB1_GRP1_ReleaseReset\n + * AHBRSTR GPIOCRST LL_AHB1_GRP1_ReleaseReset\n + * AHBRSTR GPIODRST LL_AHB1_GRP1_ReleaseReset\n + * AHBRSTR GPIOERST LL_AHB1_GRP1_ReleaseReset\n + * AHBRSTR GPIOHRST LL_AHB1_GRP1_ReleaseReset\n + * AHBRSTR GPIOFRST LL_AHB1_GRP1_ReleaseReset\n + * AHBRSTR GPIOGRST LL_AHB1_GRP1_ReleaseReset\n + * AHBRSTR CRCRST LL_AHB1_GRP1_ReleaseReset\n + * AHBRSTR FLITFRST LL_AHB1_GRP1_ReleaseReset\n + * AHBRSTR DMA1RST LL_AHB1_GRP1_ReleaseReset\n + * AHBRSTR DMA2RST LL_AHB1_GRP1_ReleaseReset\n + * AHBRSTR AESRST LL_AHB1_GRP1_ReleaseReset\n + * AHBRSTR FSMCRST LL_AHB1_GRP1_ReleaseReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB1_GRP1_PERIPH_ALL + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOH + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOG (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_CRC + * @arg @ref LL_AHB1_GRP1_PERIPH_FLASH + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_CRYP (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_FSMC (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_AHB1_GRP1_ReleaseReset(uint32_t Periphs) +{ + CLEAR_BIT(RCC->AHBRSTR, Periphs); +} + +/** + * @brief Enable AHB1 peripherals clock during Low Power (Sleep) mode. + * @rmtoll AHBLPENR GPIOALPEN LL_AHB1_GRP1_EnableClockSleep\n + * AHBLPENR GPIOBLPEN LL_AHB1_GRP1_EnableClockSleep\n + * AHBLPENR GPIOCLPEN LL_AHB1_GRP1_EnableClockSleep\n + * AHBLPENR GPIODLPEN LL_AHB1_GRP1_EnableClockSleep\n + * AHBLPENR GPIOELPEN LL_AHB1_GRP1_EnableClockSleep\n + * AHBLPENR GPIOHLPEN LL_AHB1_GRP1_EnableClockSleep\n + * AHBLPENR GPIOFLPEN LL_AHB1_GRP1_EnableClockSleep\n + * AHBLPENR GPIOGLPEN LL_AHB1_GRP1_EnableClockSleep\n + * AHBLPENR CRCLPEN LL_AHB1_GRP1_EnableClockSleep\n + * AHBLPENR FLITFLPEN LL_AHB1_GRP1_EnableClockSleep\n + * AHBLPENR SRAMLPEN LL_AHB1_GRP1_EnableClockSleep\n + * AHBLPENR DMA1LPEN LL_AHB1_GRP1_EnableClockSleep\n + * AHBLPENR DMA2LPEN LL_AHB1_GRP1_EnableClockSleep\n + * AHBLPENR AESLPEN LL_AHB1_GRP1_EnableClockSleep\n + * AHBLPENR FSMCLPEN LL_AHB1_GRP1_EnableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOH + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOG (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_CRC + * @arg @ref LL_AHB1_GRP1_PERIPH_FLASH + * @arg @ref LL_AHB1_GRP1_PERIPH_SRAM + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_CRYP (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_FSMC (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_AHB1_GRP1_EnableClockSleep(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->AHBLPENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->AHBLPENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Disable AHB1 peripherals clock during Low Power (Sleep) mode. + * @rmtoll AHBLPENR GPIOALPEN LL_AHB1_GRP1_DisableClockSleep\n + * AHBLPENR GPIOBLPEN LL_AHB1_GRP1_DisableClockSleep\n + * AHBLPENR GPIOCLPEN LL_AHB1_GRP1_DisableClockSleep\n + * AHBLPENR GPIODLPEN LL_AHB1_GRP1_DisableClockSleep\n + * AHBLPENR GPIOELPEN LL_AHB1_GRP1_DisableClockSleep\n + * AHBLPENR GPIOHLPEN LL_AHB1_GRP1_DisableClockSleep\n + * AHBLPENR GPIOFLPEN LL_AHB1_GRP1_DisableClockSleep\n + * AHBLPENR GPIOGLPEN LL_AHB1_GRP1_DisableClockSleep\n + * AHBLPENR CRCLPEN LL_AHB1_GRP1_DisableClockSleep\n + * AHBLPENR FLITFLPEN LL_AHB1_GRP1_DisableClockSleep\n + * AHBLPENR SRAMLPEN LL_AHB1_GRP1_DisableClockSleep\n + * AHBLPENR DMA1LPEN LL_AHB1_GRP1_DisableClockSleep\n + * AHBLPENR DMA2LPEN LL_AHB1_GRP1_DisableClockSleep\n + * AHBLPENR AESLPEN LL_AHB1_GRP1_DisableClockSleep\n + * AHBLPENR FSMCLPEN LL_AHB1_GRP1_DisableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOH + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOG (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_CRC + * @arg @ref LL_AHB1_GRP1_PERIPH_FLASH + * @arg @ref LL_AHB1_GRP1_PERIPH_SRAM + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_CRYP (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_FSMC (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_AHB1_GRP1_DisableClockSleep(uint32_t Periphs) +{ + CLEAR_BIT(RCC->AHBLPENR, Periphs); +} + +/** + * @} + */ + +/** @defgroup BUS_LL_EF_APB1 APB1 + * @{ + */ + +/** + * @brief Enable APB1 peripherals clock. + * @rmtoll APB1ENR TIM2EN LL_APB1_GRP1_EnableClock\n + * APB1ENR TIM3EN LL_APB1_GRP1_EnableClock\n + * APB1ENR TIM4EN LL_APB1_GRP1_EnableClock\n + * APB1ENR TIM5EN LL_APB1_GRP1_EnableClock\n + * APB1ENR TIM6EN LL_APB1_GRP1_EnableClock\n + * APB1ENR TIM7EN LL_APB1_GRP1_EnableClock\n + * APB1ENR LCDEN LL_APB1_GRP1_EnableClock\n + * APB1ENR WWDGEN LL_APB1_GRP1_EnableClock\n + * APB1ENR SPI2EN LL_APB1_GRP1_EnableClock\n + * APB1ENR SPI3EN LL_APB1_GRP1_EnableClock\n + * APB1ENR USART2EN LL_APB1_GRP1_EnableClock\n + * APB1ENR USART3EN LL_APB1_GRP1_EnableClock\n + * APB1ENR UART4EN LL_APB1_GRP1_EnableClock\n + * APB1ENR UART5EN LL_APB1_GRP1_EnableClock\n + * APB1ENR I2C1EN LL_APB1_GRP1_EnableClock\n + * APB1ENR I2C2EN LL_APB1_GRP1_EnableClock\n + * APB1ENR USBEN LL_APB1_GRP1_EnableClock\n + * APB1ENR PWREN LL_APB1_GRP1_EnableClock\n + * APB1ENR DACEN LL_APB1_GRP1_EnableClock\n + * APB1ENR COMPEN LL_APB1_GRP1_EnableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 + * @arg @ref LL_APB1_GRP1_PERIPH_LCD (*) + * @arg @ref LL_APB1_GRP1_PERIPH_WWDG + * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 + * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_USART2 + * @arg @ref LL_APB1_GRP1_PERIPH_USART3 + * @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 + * @arg @ref LL_APB1_GRP1_PERIPH_USB + * @arg @ref LL_APB1_GRP1_PERIPH_PWR + * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 + * @arg @ref LL_APB1_GRP1_PERIPH_COMP + * @arg @ref LL_APB1_GRP1_PERIPH_OPAMP (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB1_GRP1_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->APB1ENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->APB1ENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if APB1 peripheral clock is enabled or not + * @rmtoll APB1ENR TIM2EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR TIM3EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR TIM4EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR TIM5EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR TIM6EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR TIM7EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR LCDEN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR WWDGEN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR SPI2EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR SPI3EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR USART2EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR USART3EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR UART4EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR UART5EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR I2C1EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR I2C2EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR USBEN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR PWREN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR DACEN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR COMPEN LL_APB1_GRP1_IsEnabledClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 + * @arg @ref LL_APB1_GRP1_PERIPH_LCD (*) + * @arg @ref LL_APB1_GRP1_PERIPH_WWDG + * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 + * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_USART2 + * @arg @ref LL_APB1_GRP1_PERIPH_USART3 + * @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 + * @arg @ref LL_APB1_GRP1_PERIPH_USB + * @arg @ref LL_APB1_GRP1_PERIPH_PWR + * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 + * @arg @ref LL_APB1_GRP1_PERIPH_COMP + * @arg @ref LL_APB1_GRP1_PERIPH_OPAMP (*) + * + * (*) value not defined in all devices. + * @retval State of Periphs (1 or 0). +*/ +__STATIC_INLINE uint32_t LL_APB1_GRP1_IsEnabledClock(uint32_t Periphs) +{ + return (READ_BIT(RCC->APB1ENR, Periphs) == Periphs); +} + +/** + * @brief Disable APB1 peripherals clock. + * @rmtoll APB1ENR TIM2EN LL_APB1_GRP1_DisableClock\n + * APB1ENR TIM3EN LL_APB1_GRP1_DisableClock\n + * APB1ENR TIM4EN LL_APB1_GRP1_DisableClock\n + * APB1ENR TIM5EN LL_APB1_GRP1_DisableClock\n + * APB1ENR TIM6EN LL_APB1_GRP1_DisableClock\n + * APB1ENR TIM7EN LL_APB1_GRP1_DisableClock\n + * APB1ENR LCDEN LL_APB1_GRP1_DisableClock\n + * APB1ENR WWDGEN LL_APB1_GRP1_DisableClock\n + * APB1ENR SPI2EN LL_APB1_GRP1_DisableClock\n + * APB1ENR SPI3EN LL_APB1_GRP1_DisableClock\n + * APB1ENR USART2EN LL_APB1_GRP1_DisableClock\n + * APB1ENR USART3EN LL_APB1_GRP1_DisableClock\n + * APB1ENR UART4EN LL_APB1_GRP1_DisableClock\n + * APB1ENR UART5EN LL_APB1_GRP1_DisableClock\n + * APB1ENR I2C1EN LL_APB1_GRP1_DisableClock\n + * APB1ENR I2C2EN LL_APB1_GRP1_DisableClock\n + * APB1ENR USBEN LL_APB1_GRP1_DisableClock\n + * APB1ENR PWREN LL_APB1_GRP1_DisableClock\n + * APB1ENR DACEN LL_APB1_GRP1_DisableClock\n + * APB1ENR COMPEN LL_APB1_GRP1_DisableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 + * @arg @ref LL_APB1_GRP1_PERIPH_LCD (*) + * @arg @ref LL_APB1_GRP1_PERIPH_WWDG + * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 + * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_USART2 + * @arg @ref LL_APB1_GRP1_PERIPH_USART3 + * @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 + * @arg @ref LL_APB1_GRP1_PERIPH_USB + * @arg @ref LL_APB1_GRP1_PERIPH_PWR + * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 + * @arg @ref LL_APB1_GRP1_PERIPH_COMP + * @arg @ref LL_APB1_GRP1_PERIPH_OPAMP (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB1_GRP1_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APB1ENR, Periphs); +} + +/** + * @brief Force APB1 peripherals reset. + * @rmtoll APB1RSTR TIM2RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR TIM3RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR TIM4RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR TIM5RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR TIM6RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR TIM7RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR LCDRST LL_APB1_GRP1_ForceReset\n + * APB1RSTR WWDGRST LL_APB1_GRP1_ForceReset\n + * APB1RSTR SPI2RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR SPI3RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR USART2RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR USART3RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR UART4RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR UART5RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR I2C1RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR I2C2RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR USBRST LL_APB1_GRP1_ForceReset\n + * APB1RSTR PWRRST LL_APB1_GRP1_ForceReset\n + * APB1RSTR DACRST LL_APB1_GRP1_ForceReset\n + * APB1RSTR COMPRST LL_APB1_GRP1_ForceReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP1_PERIPH_ALL + * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 + * @arg @ref LL_APB1_GRP1_PERIPH_LCD (*) + * @arg @ref LL_APB1_GRP1_PERIPH_WWDG + * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 + * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_USART2 + * @arg @ref LL_APB1_GRP1_PERIPH_USART3 + * @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 + * @arg @ref LL_APB1_GRP1_PERIPH_USB + * @arg @ref LL_APB1_GRP1_PERIPH_PWR + * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 + * @arg @ref LL_APB1_GRP1_PERIPH_COMP + * @arg @ref LL_APB1_GRP1_PERIPH_OPAMP (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB1_GRP1_ForceReset(uint32_t Periphs) +{ + SET_BIT(RCC->APB1RSTR, Periphs); +} + +/** + * @brief Release APB1 peripherals reset. + * @rmtoll APB1RSTR TIM2RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR TIM3RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR TIM4RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR TIM5RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR TIM6RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR TIM7RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR LCDRST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR WWDGRST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR SPI2RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR SPI3RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR USART2RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR USART3RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR UART4RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR UART5RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR I2C1RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR I2C2RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR USBRST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR PWRRST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR DACRST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR COMPRST LL_APB1_GRP1_ReleaseReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP1_PERIPH_ALL + * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 + * @arg @ref LL_APB1_GRP1_PERIPH_LCD (*) + * @arg @ref LL_APB1_GRP1_PERIPH_WWDG + * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 + * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_USART2 + * @arg @ref LL_APB1_GRP1_PERIPH_USART3 + * @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 + * @arg @ref LL_APB1_GRP1_PERIPH_USB + * @arg @ref LL_APB1_GRP1_PERIPH_PWR + * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 + * @arg @ref LL_APB1_GRP1_PERIPH_COMP + * @arg @ref LL_APB1_GRP1_PERIPH_OPAMP (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB1_GRP1_ReleaseReset(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APB1RSTR, Periphs); +} + +/** + * @brief Enable APB1 peripherals clock during Low Power (Sleep) mode. + * @rmtoll APB1LPENR TIM2LPEN LL_APB1_GRP1_EnableClockSleep\n + * APB1LPENR TIM3LPEN LL_APB1_GRP1_EnableClockSleep\n + * APB1LPENR TIM4LPEN LL_APB1_GRP1_EnableClockSleep\n + * APB1LPENR TIM5LPEN LL_APB1_GRP1_EnableClockSleep\n + * APB1LPENR TIM6LPEN LL_APB1_GRP1_EnableClockSleep\n + * APB1LPENR TIM7LPEN LL_APB1_GRP1_EnableClockSleep\n + * APB1LPENR LCDLPEN LL_APB1_GRP1_EnableClockSleep\n + * APB1LPENR WWDGLPEN LL_APB1_GRP1_EnableClockSleep\n + * APB1LPENR SPI2LPEN LL_APB1_GRP1_EnableClockSleep\n + * APB1LPENR SPI3LPEN LL_APB1_GRP1_EnableClockSleep\n + * APB1LPENR USART2LPEN LL_APB1_GRP1_EnableClockSleep\n + * APB1LPENR USART3LPEN LL_APB1_GRP1_EnableClockSleep\n + * APB1LPENR UART4LPEN LL_APB1_GRP1_EnableClockSleep\n + * APB1LPENR UART5LPEN LL_APB1_GRP1_EnableClockSleep\n + * APB1LPENR I2C1LPEN LL_APB1_GRP1_EnableClockSleep\n + * APB1LPENR I2C2LPEN LL_APB1_GRP1_EnableClockSleep\n + * APB1LPENR USBLPEN LL_APB1_GRP1_EnableClockSleep\n + * APB1LPENR PWRLPEN LL_APB1_GRP1_EnableClockSleep\n + * APB1LPENR DACLPEN LL_APB1_GRP1_EnableClockSleep\n + * APB1LPENR COMPLPEN LL_APB1_GRP1_EnableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 + * @arg @ref LL_APB1_GRP1_PERIPH_LCD (*) + * @arg @ref LL_APB1_GRP1_PERIPH_WWDG + * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 + * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_USART2 + * @arg @ref LL_APB1_GRP1_PERIPH_USART3 + * @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 + * @arg @ref LL_APB1_GRP1_PERIPH_USB + * @arg @ref LL_APB1_GRP1_PERIPH_PWR + * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 + * @arg @ref LL_APB1_GRP1_PERIPH_COMP + * @arg @ref LL_APB1_GRP1_PERIPH_OPAMP (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB1_GRP1_EnableClockSleep(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->APB1LPENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->APB1LPENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Disable APB1 peripherals clock during Low Power (Sleep) mode. + * @rmtoll APB1LPENR TIM2LPEN LL_APB1_GRP1_DisableClockSleep\n + * APB1LPENR TIM3LPEN LL_APB1_GRP1_DisableClockSleep\n + * APB1LPENR TIM4LPEN LL_APB1_GRP1_DisableClockSleep\n + * APB1LPENR TIM5LPEN LL_APB1_GRP1_DisableClockSleep\n + * APB1LPENR TIM6LPEN LL_APB1_GRP1_DisableClockSleep\n + * APB1LPENR TIM7LPEN LL_APB1_GRP1_DisableClockSleep\n + * APB1LPENR LCDLPEN LL_APB1_GRP1_DisableClockSleep\n + * APB1LPENR WWDGLPEN LL_APB1_GRP1_DisableClockSleep\n + * APB1LPENR SPI2LPEN LL_APB1_GRP1_DisableClockSleep\n + * APB1LPENR SPI3LPEN LL_APB1_GRP1_DisableClockSleep\n + * APB1LPENR USART2LPEN LL_APB1_GRP1_DisableClockSleep\n + * APB1LPENR USART3LPEN LL_APB1_GRP1_DisableClockSleep\n + * APB1LPENR UART4LPEN LL_APB1_GRP1_DisableClockSleep\n + * APB1LPENR UART5LPEN LL_APB1_GRP1_DisableClockSleep\n + * APB1LPENR I2C1LPEN LL_APB1_GRP1_DisableClockSleep\n + * APB1LPENR I2C2LPEN LL_APB1_GRP1_DisableClockSleep\n + * APB1LPENR USBLPEN LL_APB1_GRP1_DisableClockSleep\n + * APB1LPENR PWRLPEN LL_APB1_GRP1_DisableClockSleep\n + * APB1LPENR DACLPEN LL_APB1_GRP1_DisableClockSleep\n + * APB1LPENR COMPLPEN LL_APB1_GRP1_DisableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 + * @arg @ref LL_APB1_GRP1_PERIPH_LCD (*) + * @arg @ref LL_APB1_GRP1_PERIPH_WWDG + * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 + * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_USART2 + * @arg @ref LL_APB1_GRP1_PERIPH_USART3 + * @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 + * @arg @ref LL_APB1_GRP1_PERIPH_USB + * @arg @ref LL_APB1_GRP1_PERIPH_PWR + * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 + * @arg @ref LL_APB1_GRP1_PERIPH_COMP + * @arg @ref LL_APB1_GRP1_PERIPH_OPAMP (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB1_GRP1_DisableClockSleep(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APB1LPENR, Periphs); +} + +/** + * @} + */ + +/** @defgroup BUS_LL_EF_APB2 APB2 + * @{ + */ + +/** + * @brief Enable APB2 peripherals clock. + * @rmtoll APB2ENR SYSCFGEN LL_APB2_GRP1_EnableClock\n + * APB2ENR TIM9EN LL_APB2_GRP1_EnableClock\n + * APB2ENR TIM10EN LL_APB2_GRP1_EnableClock\n + * APB2ENR TIM11EN LL_APB2_GRP1_EnableClock\n + * APB2ENR ADC1EN LL_APB2_GRP1_EnableClock\n + * APB2ENR SDIOEN LL_APB2_GRP1_EnableClock\n + * APB2ENR SPI1EN LL_APB2_GRP1_EnableClock\n + * APB2ENR USART1EN LL_APB2_GRP1_EnableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG + * @arg @ref LL_APB2_GRP1_PERIPH_TIM9 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM10 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM11 + * @arg @ref LL_APB2_GRP1_PERIPH_ADC1 + * @arg @ref LL_APB2_GRP1_PERIPH_SDIO (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 + * @arg @ref LL_APB2_GRP1_PERIPH_USART1 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB2_GRP1_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->APB2ENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->APB2ENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if APB2 peripheral clock is enabled or not + * @rmtoll APB2ENR SYSCFGEN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR TIM9EN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR TIM10EN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR TIM11EN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR ADC1EN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR SDIOEN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR SPI1EN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR USART1EN LL_APB2_GRP1_IsEnabledClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG + * @arg @ref LL_APB2_GRP1_PERIPH_TIM9 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM10 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM11 + * @arg @ref LL_APB2_GRP1_PERIPH_ADC1 + * @arg @ref LL_APB2_GRP1_PERIPH_SDIO (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 + * @arg @ref LL_APB2_GRP1_PERIPH_USART1 + * + * (*) value not defined in all devices. + * @retval State of Periphs (1 or 0). +*/ +__STATIC_INLINE uint32_t LL_APB2_GRP1_IsEnabledClock(uint32_t Periphs) +{ + return (READ_BIT(RCC->APB2ENR, Periphs) == Periphs); +} + +/** + * @brief Disable APB2 peripherals clock. + * @rmtoll APB2ENR SYSCFGEN LL_APB2_GRP1_DisableClock\n + * APB2ENR TIM9EN LL_APB2_GRP1_DisableClock\n + * APB2ENR TIM10EN LL_APB2_GRP1_DisableClock\n + * APB2ENR TIM11EN LL_APB2_GRP1_DisableClock\n + * APB2ENR ADC1EN LL_APB2_GRP1_DisableClock\n + * APB2ENR SDIOEN LL_APB2_GRP1_DisableClock\n + * APB2ENR SPI1EN LL_APB2_GRP1_DisableClock\n + * APB2ENR USART1EN LL_APB2_GRP1_DisableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG + * @arg @ref LL_APB2_GRP1_PERIPH_TIM9 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM10 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM11 + * @arg @ref LL_APB2_GRP1_PERIPH_ADC1 + * @arg @ref LL_APB2_GRP1_PERIPH_SDIO (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 + * @arg @ref LL_APB2_GRP1_PERIPH_USART1 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB2_GRP1_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APB2ENR, Periphs); +} + +/** + * @brief Force APB2 peripherals reset. + * @rmtoll APB2RSTR SYSCFGRST LL_APB2_GRP1_ForceReset\n + * APB2RSTR TIM9RST LL_APB2_GRP1_ForceReset\n + * APB2RSTR TIM10RST LL_APB2_GRP1_ForceReset\n + * APB2RSTR TIM11RST LL_APB2_GRP1_ForceReset\n + * APB2RSTR ADC1RST LL_APB2_GRP1_ForceReset\n + * APB2RSTR SDIORST LL_APB2_GRP1_ForceReset\n + * APB2RSTR SPI1RST LL_APB2_GRP1_ForceReset\n + * APB2RSTR USART1RST LL_APB2_GRP1_ForceReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB2_GRP1_PERIPH_ALL + * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG + * @arg @ref LL_APB2_GRP1_PERIPH_TIM9 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM10 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM11 + * @arg @ref LL_APB2_GRP1_PERIPH_ADC1 + * @arg @ref LL_APB2_GRP1_PERIPH_SDIO (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 + * @arg @ref LL_APB2_GRP1_PERIPH_USART1 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB2_GRP1_ForceReset(uint32_t Periphs) +{ + SET_BIT(RCC->APB2RSTR, Periphs); +} + +/** + * @brief Release APB2 peripherals reset. + * @rmtoll APB2RSTR SYSCFGRST LL_APB2_GRP1_ReleaseReset\n + * APB2RSTR TIM9RST LL_APB2_GRP1_ReleaseReset\n + * APB2RSTR TIM10RST LL_APB2_GRP1_ReleaseReset\n + * APB2RSTR TIM11RST LL_APB2_GRP1_ReleaseReset\n + * APB2RSTR ADC1RST LL_APB2_GRP1_ReleaseReset\n + * APB2RSTR SDIORST LL_APB2_GRP1_ReleaseReset\n + * APB2RSTR SPI1RST LL_APB2_GRP1_ReleaseReset\n + * APB2RSTR USART1RST LL_APB2_GRP1_ReleaseReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB2_GRP1_PERIPH_ALL + * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG + * @arg @ref LL_APB2_GRP1_PERIPH_TIM9 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM10 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM11 + * @arg @ref LL_APB2_GRP1_PERIPH_ADC1 + * @arg @ref LL_APB2_GRP1_PERIPH_SDIO (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 + * @arg @ref LL_APB2_GRP1_PERIPH_USART1 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB2_GRP1_ReleaseReset(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APB2RSTR, Periphs); +} + +/** + * @brief Enable APB2 peripherals clock during Low Power (Sleep) mode. + * @rmtoll APB2LPENR SYSCFGLPEN LL_APB2_GRP1_EnableClockSleep\n + * APB2LPENR TIM9LPEN LL_APB2_GRP1_EnableClockSleep\n + * APB2LPENR TIM10LPEN LL_APB2_GRP1_EnableClockSleep\n + * APB2LPENR TIM11LPEN LL_APB2_GRP1_EnableClockSleep\n + * APB2LPENR ADC1LPEN LL_APB2_GRP1_EnableClockSleep\n + * APB2LPENR SDIOLPEN LL_APB2_GRP1_EnableClockSleep\n + * APB2LPENR SPI1LPEN LL_APB2_GRP1_EnableClockSleep\n + * APB2LPENR USART1LPEN LL_APB2_GRP1_EnableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG + * @arg @ref LL_APB2_GRP1_PERIPH_TIM9 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM10 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM11 + * @arg @ref LL_APB2_GRP1_PERIPH_ADC1 + * @arg @ref LL_APB2_GRP1_PERIPH_SDIO (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 + * @arg @ref LL_APB2_GRP1_PERIPH_USART1 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB2_GRP1_EnableClockSleep(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->APB2LPENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->APB2LPENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Disable APB2 peripherals clock during Low Power (Sleep) mode. + * @rmtoll APB2LPENR SYSCFGLPEN LL_APB2_GRP1_DisableClockSleep\n + * APB2LPENR TIM9LPEN LL_APB2_GRP1_DisableClockSleep\n + * APB2LPENR TIM10LPEN LL_APB2_GRP1_DisableClockSleep\n + * APB2LPENR TIM11LPEN LL_APB2_GRP1_DisableClockSleep\n + * APB2LPENR ADC1LPEN LL_APB2_GRP1_DisableClockSleep\n + * APB2LPENR SDIOLPEN LL_APB2_GRP1_DisableClockSleep\n + * APB2LPENR SPI1LPEN LL_APB2_GRP1_DisableClockSleep\n + * APB2LPENR USART1LPEN LL_APB2_GRP1_DisableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG + * @arg @ref LL_APB2_GRP1_PERIPH_TIM9 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM10 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM11 + * @arg @ref LL_APB2_GRP1_PERIPH_ADC1 + * @arg @ref LL_APB2_GRP1_PERIPH_SDIO (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 + * @arg @ref LL_APB2_GRP1_PERIPH_USART1 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB2_GRP1_DisableClockSleep(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APB2LPENR, Periphs); +} + +/** + * @} + */ + + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined(RCC) */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32L1xx_LL_BUS_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_ll_comp.h b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_ll_comp.h new file mode 100755 index 0000000..95b1c31 --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_ll_comp.h @@ -0,0 +1,865 @@ +/** + ****************************************************************************** + * @file stm32l1xx_ll_comp.h + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief Header file of COMP LL module. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L1xx_LL_COMP_H +#define __STM32L1xx_LL_COMP_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx.h" + +/** @addtogroup STM32L1xx_LL_Driver + * @{ + */ + +#if defined (COMP1) || defined (COMP2) + +/** @defgroup COMP_LL COMP + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @defgroup COMP_LL_Private_Constants COMP Private Constants + * @{ + */ + +/* COMP registers bits positions */ +#define LL_COMP_OUTPUT_LEVEL_COMP1_BITOFFSET_POS ((uint32_t) 7U) /* Value equivalent to POSITION_VAL(COMP_CSR_CMP1OUT) */ +#define LL_COMP_OUTPUT_LEVEL_COMP2_BITOFFSET_POS ((uint32_t)13U) /* Value equivalent to POSITION_VAL(COMP_CSR_CMP2OUT) */ +#define LL_COMP_ENABLE_COMP1_BITOFFSET_POS ((uint32_t) 4U) /* Value equivalent to POSITION_VAL(COMP_CSR_CMP1EN) */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup COMP_LL_Private_Macros COMP Private Macros + * @{ + */ + +/** + * @brief Driver macro reserved for internal use: if COMP instance selected + * is odd (COMP1, COMP3, ...), return value '1', else return '0'. + * @param __COMP_INSTANCE__ COMP instance + * @retval If COMP instance is odd, value '1'. Else, value '0'. +*/ +#define __COMP_IS_INSTANCE_ODD(__COMP_INSTANCE__) \ + ((~((uint32_t)(__COMP_INSTANCE__) - COMP_BASE)) & 0x00000001) + +/** + * @brief Driver macro reserved for internal use: if COMP instance selected + * is even (COMP2, COMP4, ...), return value '1', else return '0'. + * @param __COMP_INSTANCE__ COMP instance + * @retval If COMP instance is even, value '1'. Else, value '0'. +*/ +#define __COMP_IS_INSTANCE_EVEN(__COMP_INSTANCE__) \ + ((uint32_t)(__COMP_INSTANCE__) - COMP_BASE) + +/** + * @} + */ + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup COMP_LL_ES_INIT COMP Exported Init structure + * @{ + */ + +/** + * @brief Structure definition of some features of COMP instance. + */ +typedef struct +{ + uint32_t PowerMode; /*!< Set comparator operating mode to adjust power and speed. + This parameter can be a value of @ref COMP_LL_EC_POWERMODE + + This feature can be modified afterwards using unitary function @ref LL_COMP_SetPowerMode(). */ + + uint32_t InputPlus; /*!< Set comparator input plus (non-inverting input). + This parameter can be a value of @ref COMP_LL_EC_INPUT_PLUS + + This feature can be modified afterwards using unitary function @ref LL_COMP_SetInputPlus(). */ + + uint32_t InputMinus; /*!< Set comparator input minus (inverting input). + This parameter can be a value of @ref COMP_LL_EC_INPUT_MINUS + + This feature can be modified afterwards using unitary function @ref LL_COMP_SetInputMinus(). */ + + uint32_t OutputSelection; /*!< Set comparator output selection. + This parameter can be a value of @ref COMP_LL_EC_OUTPUT_SELECTION + + This feature can be modified afterwards using unitary function @ref LL_COMP_SetOutputSelection(). */ + +} LL_COMP_InitTypeDef; + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup COMP_LL_Exported_Constants COMP Exported Constants + * @{ + */ + +/** @defgroup COMP_LL_EC_COMMON_WINDOWMODE Comparator common modes - Window mode + * @{ + */ +#define LL_COMP_WINDOWMODE_DISABLE ((uint32_t)0x00000000U) /*!< Window mode disable: Comparators 1 and 2 are independent */ +#define LL_COMP_WINDOWMODE_COMP2_INPUT_PLUS_COMMON (COMP_CSR_WNDWE) /*!< Window mode enable: Comparators instances pair COMP1 and COMP2 have their input plus connected together. The common input is COMP2 input plus (COMP1 input plus is no more accessible, either from GPIO and from ADC channel VCOMP). */ +/** + * @} + */ + +/** @defgroup COMP_LL_EC_POWERMODE Comparator modes - Power mode + * @{ + */ +#define LL_COMP_POWERMODE_ULTRALOWPOWER ((uint32_t)0x00000000U) /*!< COMP power mode to low speed (specific to COMP instance: COMP2) */ +#define LL_COMP_POWERMODE_MEDIUMSPEED (COMP_CSR_SPEED) /*!< COMP power mode to fast speed (specific to COMP instance: COMP2) */ +/** + * @} + */ + +/** @defgroup COMP_LL_EC_INPUT_PLUS Comparator inputs - Input plus (input non-inverting) selection + * @{ + */ +#define LL_COMP_INPUT_PLUS_NONE ((uint32_t)0x00000000U) /*!< Comparator input plus connected not connected */ +#define LL_COMP_INPUT_PLUS_IO1 (RI_ASCR2_GR6_1) /*!< Comparator input plus connected to IO1 (pin PB4 for COMP2) (specific to COMP instance: COMP2) */ +#define LL_COMP_INPUT_PLUS_IO2 (RI_ASCR2_GR6_2) /*!< Comparator input plus connected to IO1 (pin PB5 for COMP2) (specific to COMP instance: COMP2) */ +#if defined(RI_ASCR1_CH_31) +#define LL_COMP_INPUT_PLUS_IO3 (RI_ASCR2_GR6_3) /*!< Comparator input plus connected to IO1 (pin PB6 for COMP2) (specific to COMP instance: COMP2) */ +#define LL_COMP_INPUT_PLUS_IO4 (RI_ASCR2_GR6_4) /*!< Comparator input plus connected to IO1 (pin PB7 for COMP2) (specific to COMP instance: COMP2) */ +#endif +#define LL_COMP_INPUT_PLUS_IO5 (RI_ASCR1_CH_0) /*!< Comparator input plus connected to IO5 (pin PA0 for COMP1) (specific to COMP instance: COMP1) */ +#define LL_COMP_INPUT_PLUS_IO6 (RI_ASCR1_CH_1) /*!< Comparator input plus connected to IO6 (pin PA1 for COMP1) (specific to COMP instance: COMP1) */ +#define LL_COMP_INPUT_PLUS_IO7 (RI_ASCR1_CH_2) /*!< Comparator input plus connected to IO7 (pin PA2 for COMP1) (specific to COMP instance: COMP1) */ +#define LL_COMP_INPUT_PLUS_IO8 (RI_ASCR1_CH_3) /*!< Comparator input plus connected to IO8 (pin PA3 for COMP1) (specific to COMP instance: COMP1) */ +#define LL_COMP_INPUT_PLUS_IO9 (RI_ASCR1_CH_4) /*!< Comparator input plus connected to IO9 (pin PA4 for COMP1) (specific to COMP instance: COMP1) */ +#define LL_COMP_INPUT_PLUS_IO10 (RI_ASCR1_CH_5) /*!< Comparator input plus connected to IO10 (pin PA5 for COMP1) (specific to COMP instance: COMP1) */ +#define LL_COMP_INPUT_PLUS_IO11 (RI_ASCR1_CH_5) /*!< Comparator input plus connected to IO11 (pin PA5 for COMP1) (specific to COMP instance: COMP1) */ +#define LL_COMP_INPUT_PLUS_IO12 (RI_ASCR1_CH_7) /*!< Comparator input plus connected to IO12 (pin PA7 for COMP1) (specific to COMP instance: COMP1) */ +#define LL_COMP_INPUT_PLUS_IO13 (RI_ASCR1_CH_8) /*!< Comparator input plus connected to IO13 (pin PB0 for COMP1) (specific to COMP instance: COMP1) */ +#define LL_COMP_INPUT_PLUS_IO14 (RI_ASCR1_CH_9) /*!< Comparator input plus connected to IO14 (pin PB1 for COMP1) (specific to COMP instance: COMP1) */ +#define LL_COMP_INPUT_PLUS_IO15 (RI_ASCR1_CH_10) /*!< Comparator input plus connected to IO15 (pin PC0 for COMP1) (specific to COMP instance: COMP1) */ +#define LL_COMP_INPUT_PLUS_IO16 (RI_ASCR1_CH_11) /*!< Comparator input plus connected to IO16 (pin PC1 for COMP1) (specific to COMP instance: COMP1) */ +#define LL_COMP_INPUT_PLUS_IO17 (RI_ASCR1_CH_12) /*!< Comparator input plus connected to IO17 (pin PC2 for COMP1) (specific to COMP instance: COMP1) */ +#define LL_COMP_INPUT_PLUS_IO18 (RI_ASCR1_CH_13) /*!< Comparator input plus connected to IO18 (pin PC3 for COMP1) (specific to COMP instance: COMP1) */ +#define LL_COMP_INPUT_PLUS_IO19 (RI_ASCR1_CH_14) /*!< Comparator input plus connected to IO19 (pin PC4 for COMP1) (specific to COMP instance: COMP1) */ +#define LL_COMP_INPUT_PLUS_IO20 (RI_ASCR1_CH_15) /*!< Comparator input plus connected to IO20 (pin PC5 for COMP1) (specific to COMP instance: COMP1) */ +#define LL_COMP_INPUT_PLUS_IO21 (RI_ASCR1_CH_18) /*!< Comparator input plus connected to IO21 (pin PB12 for COMP1) (specific to COMP instance: COMP1) */ +#define LL_COMP_INPUT_PLUS_IO22 (RI_ASCR1_CH_19) /*!< Comparator input plus connected to IO22 (pin PB13 for COMP1) (specific to COMP instance: COMP1) */ +#define LL_COMP_INPUT_PLUS_IO23 (RI_ASCR1_CH_20) /*!< Comparator input plus connected to IO23 (pin PB14 for COMP1) (specific to COMP instance: COMP1) */ +#define LL_COMP_INPUT_PLUS_IO24 (RI_ASCR1_CH_21) /*!< Comparator input plus connected to IO24 (pin PB15 for COMP1) (specific to COMP instance: COMP1) */ +#define LL_COMP_INPUT_PLUS_IO25 (RI_ASCR1_CH_22) /*!< Comparator input plus connected to IO25 (pin PE7 for COMP1) (specific to COMP instance: COMP1) */ +#define LL_COMP_INPUT_PLUS_IO26 (RI_ASCR1_CH_23) /*!< Comparator input plus connected to IO26 (pin PE8 for COMP1) (specific to COMP instance: COMP1) */ +#define LL_COMP_INPUT_PLUS_IO27 (RI_ASCR1_CH_24) /*!< Comparator input plus connected to IO27 (pin PE9 for COMP1) (specific to COMP instance: COMP1) */ +#define LL_COMP_INPUT_PLUS_IO28 (RI_ASCR1_CH_25) /*!< Comparator input plus connected to IO28 (pin PE10 for COMP1) (specific to COMP instance: COMP1) */ +#if defined(RI_ASCR1_CH_31) +#define LL_COMP_INPUT_PLUS_IO29 (RI_ASCR1_CH_27) /*!< Comparator input plus connected to IO29 (pin PF6 for COMP1) (specific to COMP instance: COMP1) */ +#define LL_COMP_INPUT_PLUS_IO30 (RI_ASCR1_CH_28) /*!< Comparator input plus connected to IO30 (pin PF7 for COMP1) (specific to COMP instance: COMP1) */ +#define LL_COMP_INPUT_PLUS_IO31 (RI_ASCR1_CH_29) /*!< Comparator input plus connected to IO31 (pin PF8 for COMP1) (specific to COMP instance: COMP1) */ +#define LL_COMP_INPUT_PLUS_IO32 (RI_ASCR1_CH_30) /*!< Comparator input plus connected to IO32 (pin PF9 for COMP1) (specific to COMP instance: COMP1) */ +#define LL_COMP_INPUT_PLUS_IO33 (RI_ASCR1_CH_31) /*!< Comparator input plus connected to IO33 (pin PF10 for COMP1) (specific to COMP instance: COMP1) */ +#endif +#if defined(OPAMP1) +#define LL_COMP_INPUT_PLUS_OPAMP1 (RI_ASCR1_CH_3) /*!< Comparator input plus connected to OPAMP1 output (specific to COMP instance: COMP1) */ +#define LL_COMP_INPUT_PLUS_OPAMP2 (RI_ASCR1_CH_8) /*!< Comparator input plus connected to OPAMP2 output (specific to COMP instance: COMP1) */ +#endif +#if defined(OPAMP3) +#define LL_COMP_INPUT_PLUS_OPAMP3 (RI_ASCR1_CH_13) /*!< Comparator input plus connected to OPAMP3 output (specific to COMP instance: COMP1) */ +#endif +/** + * @} + */ + +/** @defgroup COMP_LL_EC_INPUT_MINUS Comparator inputs - Input minus (input inverting) selection + * @{ + */ +#define LL_COMP_INPUT_MINUS_1_4VREFINT (COMP_CSR_INSEL_2 | COMP_CSR_INSEL_0) /*!< Comparator input minus connected to 1/4 VrefInt (specific to COMP instance: COMP2) */ +#define LL_COMP_INPUT_MINUS_1_2VREFINT (COMP_CSR_INSEL_2 ) /*!< Comparator input minus connected to 1/2 VrefInt (specific to COMP instance: COMP2) */ +#define LL_COMP_INPUT_MINUS_3_4VREFINT ( COMP_CSR_INSEL_1 | COMP_CSR_INSEL_0) /*!< Comparator input minus connected to 3/4 VrefInt (specific to COMP instance: COMP2) */ +#define LL_COMP_INPUT_MINUS_VREFINT ( COMP_CSR_INSEL_1 ) /*!< Comparator input minus connected to VrefInt */ +#define LL_COMP_INPUT_MINUS_DAC1_CH1 (COMP_CSR_INSEL_2 | COMP_CSR_INSEL_1 ) /*!< Comparator input minus connected to DAC1 channel 1 (DAC_OUT1) (specific to COMP instance: COMP2) */ +#define LL_COMP_INPUT_MINUS_DAC1_CH2 (COMP_CSR_INSEL_2 | COMP_CSR_INSEL_1 | COMP_CSR_INSEL_0) /*!< Comparator input minus connected to DAC1 channel 2 (DAC_OUT2) (specific to COMP instance: COMP2) */ +#define LL_COMP_INPUT_MINUS_IO1 ( COMP_CSR_INSEL_0) /*!< Comparator input minus connected to IO1 (pin PB3 for COMP2) (specific to COMP instance: COMP2) */ +/** + * @} + */ + +/** @defgroup COMP_LL_EC_INPUT_PULLING_RESISTOR Comparator input - Pulling resistor + * @{ + */ +#define LL_COMP_INPUT_MINUS_PULL_NO ((uint32_t)0x00000000U) /*!< Comparator input minus not connected to any pulling resistor */ +#define LL_COMP_INPUT_MINUS_PULL_UP_10K (COMP_CSR_10KPU) /*!< Comparator input minus connected to pull-up resistor of 10kOhm (specific to COMP instance: COMP1) */ +#define LL_COMP_INPUT_MINUS_PULL_UP_400K (COMP_CSR_400KPU) /*!< Comparator input minus connected to pull-up resistor of 400kOhm (specific to COMP instance: COMP1) */ +#define LL_COMP_INPUT_MINUS_PULL_DOWN_10K (COMP_CSR_10KPD) /*!< Comparator input minus connected to pull-down resistor of 10kOhm (specific to COMP instance: COMP1) */ +#define LL_COMP_INPUT_MINUS_PULL_DOWN_400K (COMP_CSR_400KPD) /*!< Comparator input minus connected to pull-down resistor of 400kOhm (specific to COMP instance: COMP1) */ + +/** + * @} + */ + +/** @defgroup COMP_LL_EC_OUTPUT_SELECTION Comparator output - Output selection + * @{ + */ +#define LL_COMP_OUTPUT_NONE (COMP_CSR_OUTSEL_2 | COMP_CSR_OUTSEL_1 | COMP_CSR_OUTSEL_0) /*!< COMP output is not connected to other peripherals (except GPIO and EXTI that are always connected to COMP output) (specific to COMP instance: COMP2) */ +#define LL_COMP_OUTPUT_TIM2_IC4 ((uint32_t)0x00000000) /*!< COMP output connected to TIM2 input capture 4 (specific to COMP instance: COMP2) */ +#define LL_COMP_OUTPUT_TIM2_OCREFCLR ( COMP_CSR_OUTSEL_0) /*!< COMP output connected to TIM2 OCREF clear (specific to COMP instance: COMP2) */ +#define LL_COMP_OUTPUT_TIM3_IC4 ( COMP_CSR_OUTSEL_1 ) /*!< COMP output connected to TIM3 input capture 4 (specific to COMP instance: COMP2) */ +#define LL_COMP_OUTPUT_TIM3_OCREFCLR ( COMP_CSR_OUTSEL_1 | COMP_CSR_OUTSEL_0) /*!< COMP output connected to TIM3 OCREF clear (specific to COMP instance: COMP2) */ +#define LL_COMP_OUTPUT_TIM4_IC4 (COMP_CSR_OUTSEL_2 ) /*!< COMP output connected to TIM4 input capture 4 (specific to COMP instance: COMP2) */ +#define LL_COMP_OUTPUT_TIM4_OCREFCLR (COMP_CSR_OUTSEL_2 | COMP_CSR_OUTSEL_0) /*!< COMP output connected to TIM4 OCREF clear (specific to COMP instance: COMP2) */ +#define LL_COMP_OUTPUT_TIM10_IC1 (COMP_CSR_OUTSEL_2 | COMP_CSR_OUTSEL_1 ) /*!< COMP output connected to TIM10 input capture 1 (specific to COMP instance: COMP2) */ +/** + * @} + */ + +/** @defgroup COMP_LL_EC_OUTPUT_LEVEL Comparator output - Output level + * @{ + */ +#define LL_COMP_OUTPUT_LEVEL_LOW ((uint32_t)0x00000000U) /*!< Comparator output level low (if the polarity is not inverted, otherwise to be complemented) */ +#define LL_COMP_OUTPUT_LEVEL_HIGH ((uint32_t)0x00000001U) /*!< Comparator output level high (if the polarity is not inverted, otherwise to be complemented) */ +/** + * @} + */ + +/** @defgroup COMP_LL_EC_HW_DELAYS Definitions of COMP hardware constraints delays + * @note Only COMP IP HW delays are defined in COMP LL driver driver, + * not timeout values. + * For details on delays values, refer to descriptions in source code + * above each literal definition. + * @{ + */ + +/* Delay for comparator startup time. */ +/* Note: Delay required to reach propagation delay specification. */ +/* Literal set to maximum value (refer to device datasheet, */ +/* parameter "tSTART"). */ +/* Unit: us */ +#define LL_COMP_DELAY_STARTUP_US ((uint32_t) 25U) /*!< Delay for COMP startup time */ + + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup COMP_LL_Exported_Macros COMP Exported Macros + * @{ + */ +/** @defgroup COMP_LL_EM_WRITE_READ Common write and read registers macro + * @{ + */ + +/** + * @brief Write a value in COMP register + * @param __INSTANCE__ comparator instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_COMP_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in COMP register + * @param __INSTANCE__ comparator instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_COMP_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** @defgroup COMP_LL_EM_HELPER_MACRO COMP helper macro + * @{ + */ + +/** + * @brief Helper macro to select the COMP common instance + * to which is belonging the selected COMP instance. + * @note COMP common register instance can be used to + * set parameters common to several COMP instances. + * Refer to functions having argument "COMPxy_COMMON" as parameter. + * @param __COMPx__ COMP instance + * @retval COMP common instance or value "0" if there is no COMP common instance. + */ +#define __LL_COMP_COMMON_INSTANCE(__COMPx__) \ + (COMP12_COMMON) + +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup COMP_LL_Exported_Functions COMP Exported Functions + * @{ + */ + +/** @defgroup COMP_LL_EF_Configuration_comparator_common Configuration of COMP hierarchical scope: common to several COMP instances + * @{ + */ + +/** + * @brief Set window mode of a pair of comparators instances + * (2 consecutive COMP instances odd and even COMP and COMP). + * @rmtoll CSR WNDWE LL_COMP_SetCommonWindowMode + * @param COMPxy_COMMON Comparator common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_COMP_COMMON_INSTANCE() ) + * @param WindowMode This parameter can be one of the following values: + * @arg @ref LL_COMP_WINDOWMODE_DISABLE + * @arg @ref LL_COMP_WINDOWMODE_COMP2_INPUT_PLUS_COMMON + * @retval None + */ +__STATIC_INLINE void LL_COMP_SetCommonWindowMode(COMP_Common_TypeDef *COMPxy_COMMON, uint32_t WindowMode) +{ + MODIFY_REG(COMPxy_COMMON->CSR, COMP_CSR_WNDWE, WindowMode); +} + +/** + * @brief Get window mode of a pair of comparators instances + * (2 consecutive COMP instances odd and even COMP and COMP). + * @rmtoll CSR WNDWE LL_COMP_GetCommonWindowMode + * @param COMPxy_COMMON Comparator common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_COMP_COMMON_INSTANCE() ) + * @retval Returned value can be one of the following values: + * @arg @ref LL_COMP_WINDOWMODE_DISABLE + * @arg @ref LL_COMP_WINDOWMODE_COMP2_INPUT_PLUS_COMMON + */ +__STATIC_INLINE uint32_t LL_COMP_GetCommonWindowMode(COMP_Common_TypeDef *COMPxy_COMMON) +{ + return (uint32_t)(READ_BIT(COMPxy_COMMON->CSR, COMP_CSR_WNDWE)); +} + +/** + * @} + */ + +/** @defgroup COMP_LL_EF_Configuration_comparator_modes Configuration of comparator modes + * @{ + */ + +/** + * @brief Set comparator instance operating mode to adjust power and speed. + * @rmtoll COMP2_CSR SPEED LL_COMP_SetPowerMode + * @param COMPx Comparator instance + * @param PowerMode This parameter can be one of the following values: + * @arg @ref LL_COMP_POWERMODE_MEDIUMSPEED (1) + * @arg @ref LL_COMP_POWERMODE_ULTRALOWPOWER (1) + * + * (1) Available only on COMP instance: COMP2. + * @retval None + */ +__STATIC_INLINE void LL_COMP_SetPowerMode(COMP_TypeDef *COMPx, uint32_t PowerMode) +{ + MODIFY_REG(COMP->CSR, COMP_CSR_SPEED, PowerMode); +} + +/** + * @brief Get comparator instance operating mode to adjust power and speed. + * @rmtoll COMP2_CSR SPEED LL_COMP_GetPowerMode + * @param COMPx Comparator instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_COMP_POWERMODE_MEDIUMSPEED (1) + * @arg @ref LL_COMP_POWERMODE_ULTRALOWPOWER (1) + * + * (1) Available only on COMP instance: COMP2. + */ +__STATIC_INLINE uint32_t LL_COMP_GetPowerMode(COMP_TypeDef *COMPx) +{ + return (uint32_t)(READ_BIT(COMP->CSR, COMP_CSR_SPEED)); +} + +/** + * @} + */ + +/** @defgroup COMP_LL_EF_Configuration_comparator_inputs Configuration of comparator inputs + * @{ + */ + +/** + * @brief Set comparator input plus (non-inverting). + * @note In case of comparator input selected to be connected to IO: + * GPIO pins are specific to each comparator instance. + * Refer to description of parameters or to reference manual. + * @rmtoll RI RI_ASCR1_CH LL_COMP_SetInputPlus\n + * RI RI_ASCR2_GR6 LL_COMP_SetInputPlus + * @param COMPx Comparator instance + * @param InputPlus This parameter can be one of the following values: + * @arg @ref LL_COMP_INPUT_PLUS_NONE + * @arg @ref LL_COMP_INPUT_PLUS_IO1 (2) + * @arg @ref LL_COMP_INPUT_PLUS_IO2 (2) + * @arg @ref LL_COMP_INPUT_PLUS_IO3 (2)(5) + * @arg @ref LL_COMP_INPUT_PLUS_IO4 (2)(5) + * @arg @ref LL_COMP_INPUT_PLUS_IO5 (1) + * @arg @ref LL_COMP_INPUT_PLUS_IO6 (1) + * @arg @ref LL_COMP_INPUT_PLUS_IO7 (1) + * @arg @ref LL_COMP_INPUT_PLUS_IO8 (1) + * @arg @ref LL_COMP_INPUT_PLUS_IO9 (1) + * @arg @ref LL_COMP_INPUT_PLUS_IO10 (1) + * @arg @ref LL_COMP_INPUT_PLUS_IO11 (1) + * @arg @ref LL_COMP_INPUT_PLUS_IO12 (1) + * @arg @ref LL_COMP_INPUT_PLUS_IO13 (1) + * @arg @ref LL_COMP_INPUT_PLUS_IO14 (1) + * @arg @ref LL_COMP_INPUT_PLUS_IO15 (1) + * @arg @ref LL_COMP_INPUT_PLUS_IO16 (1) + * @arg @ref LL_COMP_INPUT_PLUS_IO17 (1) + * @arg @ref LL_COMP_INPUT_PLUS_IO18 (1) + * @arg @ref LL_COMP_INPUT_PLUS_IO19 (1) + * @arg @ref LL_COMP_INPUT_PLUS_IO20 (1) + * @arg @ref LL_COMP_INPUT_PLUS_IO21 (1) + * @arg @ref LL_COMP_INPUT_PLUS_IO22 (1) + * @arg @ref LL_COMP_INPUT_PLUS_IO23 (1) + * @arg @ref LL_COMP_INPUT_PLUS_IO24 (1) + * @arg @ref LL_COMP_INPUT_PLUS_IO25 (1) + * @arg @ref LL_COMP_INPUT_PLUS_IO26 (1) + * @arg @ref LL_COMP_INPUT_PLUS_IO27 (1) + * @arg @ref LL_COMP_INPUT_PLUS_IO28 (1) + * @arg @ref LL_COMP_INPUT_PLUS_IO29 (1)(4) + * @arg @ref LL_COMP_INPUT_PLUS_IO30 (1)(4) + * @arg @ref LL_COMP_INPUT_PLUS_IO31 (1)(4) + * @arg @ref LL_COMP_INPUT_PLUS_IO32 (1)(4) + * @arg @ref LL_COMP_INPUT_PLUS_IO33 (1)(4) + * @arg @ref LL_COMP_INPUT_PLUS_OPAMP1 (1)(3) + * @arg @ref LL_COMP_INPUT_PLUS_OPAMP2 (1)(3) + * @arg @ref LL_COMP_INPUT_PLUS_OPAMP3 (1)(4) + * + * (1) Available only on COMP instance: COMP1. \n + * (2) Available only on COMP instance: COMP2. \n + * (3) Available on devices: STM32L100xB, STM32L151xB, STM32L152xB, STM32L100xBA, STM32L151xBA, STM32L152xBA, STM32L151xCA, STM32L151xD, STM32L152xCA, STM32L152xD, STM32L162xCA, STM32L162xD \n + * (4) Available on devices: STM32L151xCA, STM32L151xD, STM32L152xCA, STM32L152xD, STM32L162xCA, STM32L162xD \n + * (5) Available on devices: STM32L100xC, STM32L151xC, STM32L152xC, STM32L162xC, STM32L151xCA, STM32L151xD, STM32L152xCA, STM32L152xD, STM32L162xCA, STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX, STM32L152xE, STM32L152xDX, STM32L162xE, STM32L162xDX + * @retval None + */ +__STATIC_INLINE void LL_COMP_SetInputPlus(COMP_TypeDef *COMPx, uint32_t InputPlus) +{ + /* Set switch in routing interface (RI) register ASCR1 or ASCR2 */ + /* Note: If COMP instance COMP1 is selected, this function performs */ + /* necessary actions on routing interface: */ + /* - close switch netween comparator 1 and switch matrix */ + /* (RI_ASCR1_VCOMP) */ + /* - enable IO switch control mode (RI_ASCR1_SCM) */ + /* If ADC needs to be used afterwards, disable IO switch control */ + /* mode using function @ref LL_RI_DisableSwitchControlMode(). */ + register uint32_t *preg = ((uint32_t *)((uint32_t) ((uint32_t)(&(RI->ASCR1)) + ((__COMP_IS_INSTANCE_EVEN(COMPx)) << 2U)))); + + MODIFY_REG(*preg, + (RI_ASCR1_CH * __COMP_IS_INSTANCE_ODD(COMPx)) | (RI_ASCR2_GR6 * __COMP_IS_INSTANCE_EVEN(COMPx)), + InputPlus | ((RI_ASCR1_VCOMP | RI_ASCR1_SCM) * __COMP_IS_INSTANCE_ODD(COMPx))); +} + +/** + * @brief Get comparator input plus (non-inverting). + * @note In case of comparator input selected to be connected to IO: + * GPIO pins are specific to each comparator instance. + * Refer to description of parameters or to reference manual. + * @rmtoll RI RI_ASCR1_CH LL_COMP_GetInputPlus\n + * RI RI_ASCR2_GR6 LL_COMP_GetInputPlus + * @param COMPx Comparator instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_COMP_INPUT_PLUS_NONE + * @arg @ref LL_COMP_INPUT_PLUS_IO1 (2) + * @arg @ref LL_COMP_INPUT_PLUS_IO2 (2) + * @arg @ref LL_COMP_INPUT_PLUS_IO3 (2)(5) + * @arg @ref LL_COMP_INPUT_PLUS_IO4 (2)(5) + * @arg @ref LL_COMP_INPUT_PLUS_IO5 (1) + * @arg @ref LL_COMP_INPUT_PLUS_IO6 (1) + * @arg @ref LL_COMP_INPUT_PLUS_IO7 (1) + * @arg @ref LL_COMP_INPUT_PLUS_IO8 (1) + * @arg @ref LL_COMP_INPUT_PLUS_IO9 (1) + * @arg @ref LL_COMP_INPUT_PLUS_IO10 (1) + * @arg @ref LL_COMP_INPUT_PLUS_IO11 (1) + * @arg @ref LL_COMP_INPUT_PLUS_IO12 (1) + * @arg @ref LL_COMP_INPUT_PLUS_IO13 (1) + * @arg @ref LL_COMP_INPUT_PLUS_IO14 (1) + * @arg @ref LL_COMP_INPUT_PLUS_IO15 (1) + * @arg @ref LL_COMP_INPUT_PLUS_IO16 (1) + * @arg @ref LL_COMP_INPUT_PLUS_IO17 (1) + * @arg @ref LL_COMP_INPUT_PLUS_IO18 (1) + * @arg @ref LL_COMP_INPUT_PLUS_IO19 (1) + * @arg @ref LL_COMP_INPUT_PLUS_IO20 (1) + * @arg @ref LL_COMP_INPUT_PLUS_IO21 (1) + * @arg @ref LL_COMP_INPUT_PLUS_IO22 (1) + * @arg @ref LL_COMP_INPUT_PLUS_IO23 (1) + * @arg @ref LL_COMP_INPUT_PLUS_IO24 (1) + * @arg @ref LL_COMP_INPUT_PLUS_IO25 (1) + * @arg @ref LL_COMP_INPUT_PLUS_IO26 (1) + * @arg @ref LL_COMP_INPUT_PLUS_IO27 (1) + * @arg @ref LL_COMP_INPUT_PLUS_IO28 (1) + * @arg @ref LL_COMP_INPUT_PLUS_IO29 (1)(4) + * @arg @ref LL_COMP_INPUT_PLUS_IO30 (1)(4) + * @arg @ref LL_COMP_INPUT_PLUS_IO31 (1)(4) + * @arg @ref LL_COMP_INPUT_PLUS_IO32 (1)(4) + * @arg @ref LL_COMP_INPUT_PLUS_IO33 (1)(4) + * @arg @ref LL_COMP_INPUT_PLUS_OPAMP1 (1)(3) + * @arg @ref LL_COMP_INPUT_PLUS_OPAMP2 (1)(3) + * @arg @ref LL_COMP_INPUT_PLUS_OPAMP3 (1)(4) + * + * (1) Available only on COMP instance: COMP1. \n + * (2) Available only on COMP instance: COMP2. \n + * (3) Available on devices: STM32L100xB, STM32L151xB, STM32L152xB, STM32L100xBA, STM32L151xBA, STM32L152xBA, STM32L151xCA, STM32L151xD, STM32L152xCA, STM32L152xD, STM32L162xCA, STM32L162xD \n + * (4) Available on devices: STM32L151xCA, STM32L151xD, STM32L152xCA, STM32L152xD, STM32L162xCA, STM32L162xD \n + * (5) Available on devices: STM32L100xC, STM32L151xC, STM32L152xC, STM32L162xC, STM32L151xCA, STM32L151xD, STM32L152xCA, STM32L152xD, STM32L162xCA, STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX, STM32L152xE, STM32L152xDX, STM32L162xE, STM32L162xDX + */ +__STATIC_INLINE uint32_t LL_COMP_GetInputPlus(COMP_TypeDef *COMPx) +{ + /* Get switch state in routing interface (RI) register ASCR1 or ASCR2 */ + register uint32_t *preg = ((uint32_t *)((uint32_t) ((uint32_t)(&(RI->ASCR1)) + ((__COMP_IS_INSTANCE_EVEN(COMPx)) << 2U)))); + + return (uint32_t)(READ_BIT(*preg, + (RI_ASCR1_CH * __COMP_IS_INSTANCE_ODD(COMPx)) | (RI_ASCR2_GR6 * __COMP_IS_INSTANCE_EVEN(COMPx)))); +} + +/** + * @brief Set comparator input minus (inverting). + * @note In case of comparator input selected to be connected to IO: + * GPIO pins are specific to each comparator instance. + * Refer to description of parameters or to reference manual. + * @rmtoll CSR COMP_CSR_INSEL LL_COMP_SetInputMinus + * @param COMPx Comparator instance + * @param InputMinus This parameter can be one of the following values: + * @arg @ref LL_COMP_INPUT_MINUS_1_4VREFINT (1) + * @arg @ref LL_COMP_INPUT_MINUS_1_2VREFINT (1) + * @arg @ref LL_COMP_INPUT_MINUS_3_4VREFINT (1) + * @arg @ref LL_COMP_INPUT_MINUS_VREFINT + * @arg @ref LL_COMP_INPUT_MINUS_DAC1_CH1 (1) + * @arg @ref LL_COMP_INPUT_MINUS_DAC1_CH2 (1) + * @arg @ref LL_COMP_INPUT_MINUS_IO1 (1) + * + * (1) Available only on COMP instance: COMP2. + * @retval None + */ +__STATIC_INLINE void LL_COMP_SetInputMinus(COMP_TypeDef *COMPx, uint32_t InputMinus) +{ + /* On this STM32 serie, only COMP instance COMP1 input minus is fixed to */ + /* VrefInt. Check of comparator instance is implemented to modify register */ + /* only if COMP2 is selected. */ + MODIFY_REG(COMP->CSR, + COMP_CSR_INSEL * __COMP_IS_INSTANCE_EVEN(COMPx), + InputMinus * __COMP_IS_INSTANCE_EVEN(COMPx)); +} + +/** + * @brief Get comparator input minus (inverting). + * @note In case of comparator input selected to be connected to IO: + * GPIO pins are specific to each comparator instance. + * Refer to description of parameters or to reference manual. + * @rmtoll CSR COMP_CSR_INSEL LL_COMP_SetInputMinus + * @param COMPx Comparator instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_COMP_INPUT_MINUS_1_4VREFINT (1) + * @arg @ref LL_COMP_INPUT_MINUS_1_2VREFINT (1) + * @arg @ref LL_COMP_INPUT_MINUS_3_4VREFINT (1) + * @arg @ref LL_COMP_INPUT_MINUS_VREFINT + * @arg @ref LL_COMP_INPUT_MINUS_DAC1_CH1 (1) + * @arg @ref LL_COMP_INPUT_MINUS_DAC1_CH2 (1) + * @arg @ref LL_COMP_INPUT_MINUS_IO1 (1) + * + * (1) Available only on COMP instance: COMP2. + */ +__STATIC_INLINE uint32_t LL_COMP_GetInputMinus(COMP_TypeDef *COMPx) +{ + /* On this STM32 serie, only COMP instance COMP1 input minus is fixed to */ + /* VrefInt. Check of comparator instance is implemented to return */ + /* the comparator input plus depending on COMP instance selected. */ + return (uint32_t)((READ_BIT(COMP->CSR, COMP_CSR_INSEL) * __COMP_IS_INSTANCE_EVEN(COMPx)) + | (LL_COMP_INPUT_MINUS_VREFINT * __COMP_IS_INSTANCE_ODD(COMPx))); +} + +/** + * @brief Set comparator input pulling resistor. + * @rmtoll CSR 10KPU LL_COMP_SetInputPullingResistor\n + * CSR 400KPU LL_COMP_SetInputPullingResistor\n + * CSR 10KPD LL_COMP_SetInputPullingResistor\n + * CSR 400KPD LL_COMP_SetInputPullingResistor + * @param COMPx Comparator instance + * @param InputPullingResistor This parameter can be one of the following values: + * @arg @ref LL_COMP_INPUT_MINUS_PULL_NO + * @arg @ref LL_COMP_INPUT_MINUS_PULL_UP_10K (1) + * @arg @ref LL_COMP_INPUT_MINUS_PULL_UP_400K (1) + * @arg @ref LL_COMP_INPUT_MINUS_PULL_DOWN_10K (1) + * @arg @ref LL_COMP_INPUT_MINUS_PULL_DOWN_400K (1) + * + * (1) Available only on COMP instance: COMP1. + * @retval None + */ +__STATIC_INLINE void LL_COMP_SetInputPullingResistor(COMP_TypeDef *COMPx, uint32_t InputPullingResistor) +{ + /* On this STM32 serie, only COMP instance COMP1 has input pulling */ + /* resistor. Check of comparator instance is implemented to modify register */ + /* only if COMP1 is selected. */ + MODIFY_REG(COMP->CSR, + (COMP_CSR_10KPU | COMP_CSR_400KPU | COMP_CSR_10KPD | COMP_CSR_400KPD) * __COMP_IS_INSTANCE_ODD(COMPx), + InputPullingResistor * __COMP_IS_INSTANCE_ODD(COMPx)); +} + +/** + * @brief Get comparator input pulling resistor. + * @rmtoll CSR 10KPU LL_COMP_SetInputPullingResistor\n + * CSR 400KPU LL_COMP_SetInputPullingResistor\n + * CSR 10KPD LL_COMP_SetInputPullingResistor\n + * CSR 400KPD LL_COMP_SetInputPullingResistor + * @param COMPx Comparator instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_COMP_INPUT_MINUS_PULL_NO + * @arg @ref LL_COMP_INPUT_MINUS_PULL_UP_10K (1) + * @arg @ref LL_COMP_INPUT_MINUS_PULL_UP_400K (1) + * @arg @ref LL_COMP_INPUT_MINUS_PULL_DOWN_10K (1) + * @arg @ref LL_COMP_INPUT_MINUS_PULL_DOWN_400K (1) + * + * (1) Available only on COMP instance: COMP1. + */ +__STATIC_INLINE uint32_t LL_COMP_GetInputPullingResistor(COMP_TypeDef *COMPx) +{ + /* On this STM32 serie, only COMP instance COMP1 has input pulling */ + /* resistor. Check of comparator instance is implemented to return */ + /* the comparator input pulling resistor depending on COMP instance */ + /* selected. */ + /* On this STM32 serie, only COMP instance COMP1 input minus is fixed to */ + /* VrefInt. Check of comparator instance is implemented to return */ + /* the comparator input plus depending on COMP instance selected. */ + return (uint32_t)((READ_BIT(COMP->CSR, (COMP_CSR_10KPU | COMP_CSR_400KPU | COMP_CSR_10KPD | COMP_CSR_400KPD)) * __COMP_IS_INSTANCE_ODD(COMPx)) + | (LL_COMP_INPUT_MINUS_PULL_NO * __COMP_IS_INSTANCE_EVEN(COMPx))); +} + +/** + * @} + */ + +/** @defgroup COMP_LL_EF_Configuration_comparator_output Configuration of comparator output + * @{ + */ + +/** + * @brief Set comparator output selection. + * @note Availability of parameters of output selection to timer + * depends on timers availability on the selected device. + * @rmtoll CSR OUTSEL LL_COMP_SetOutputSelection + * @param COMPx Comparator instance + * @param OutputSelection This parameter can be one of the following values: + * @arg @ref LL_COMP_OUTPUT_NONE + * @arg @ref LL_COMP_OUTPUT_TIM2_IC4 (1)(2) + * @arg @ref LL_COMP_OUTPUT_TIM2_OCREFCLR (1)(2) + * @arg @ref LL_COMP_OUTPUT_TIM3_IC4 (1)(2) + * @arg @ref LL_COMP_OUTPUT_TIM3_OCREFCLR (1)(2) + * @arg @ref LL_COMP_OUTPUT_TIM4_IC4 (1)(2) + * @arg @ref LL_COMP_OUTPUT_TIM4_OCREFCLR (1)(2) + * @arg @ref LL_COMP_OUTPUT_TIM10_IC1 (1)(2) + * + * (1) Parameter availability depending on timer availability + * on the selected device. + * (2) Available only on COMP instance: COMP2. + * @retval None + */ +__STATIC_INLINE void LL_COMP_SetOutputSelection(COMP_TypeDef *COMPx, uint32_t OutputSelection) +{ + /* On this STM32 serie, only COMP instance COMP2 has feature output */ + /* selection. Check of comparator instance is implemented to modify register*/ + /* only if COMP2 is selected. */ + MODIFY_REG(COMP->CSR, + COMP_CSR_OUTSEL * __COMP_IS_INSTANCE_EVEN(COMPx), + OutputSelection * __COMP_IS_INSTANCE_EVEN(COMPx)); +} + +/** + * @brief Get comparator output selection. + * @note Availability of parameters of output selection to timer + * depends on timers availability on the selected device. + * @rmtoll CSR OUTSEL LL_COMP_GetOutputSelection + * @param COMPx Comparator instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_COMP_OUTPUT_NONE + * @arg @ref LL_COMP_OUTPUT_TIM2_IC4 (1)(2) + * @arg @ref LL_COMP_OUTPUT_TIM2_OCREFCLR (1)(2) + * @arg @ref LL_COMP_OUTPUT_TIM3_IC4 (1)(2) + * @arg @ref LL_COMP_OUTPUT_TIM3_OCREFCLR (1)(2) + * @arg @ref LL_COMP_OUTPUT_TIM4_IC4 (1)(2) + * @arg @ref LL_COMP_OUTPUT_TIM4_OCREFCLR (1)(2) + * @arg @ref LL_COMP_OUTPUT_TIM10_IC1 (1)(2) + * + * (1) Parameter availability depending on timer availability + * on the selected device. + * (2) Available only on COMP instance: COMP2. + */ +__STATIC_INLINE uint32_t LL_COMP_GetOutputSelection(COMP_TypeDef *COMPx) +{ + /* On this STM32 serie, only COMP instance COMP2 has feature output */ + /* selection. Check of comparator instance is implemented to return */ + /* the comparator output depending on COMP instance selected. */ + return (uint32_t)((READ_BIT(COMP->CSR, COMP_CSR_OUTSEL) * __COMP_IS_INSTANCE_EVEN(COMPx)) + | (LL_COMP_OUTPUT_NONE * __COMP_IS_INSTANCE_ODD(COMPx))); +} + +/** + * @} + */ + +/** @defgroup COMP_LL_EF_Operation Operation on comparator instance + * @{ + */ + +/** + * @brief Enable comparator instance. + * @note After enable from off state, comparator requires a delay + * to reach reach propagation delay specification. + * Refer to device datasheet, parameter "tSTART". + * @rmtoll CSR COMP1EN LL_COMP_Enable\n + * CSR COMP_CSR_INSEL LL_COMP_Enable + * @param COMPx Comparator instance (1) + * + * (1) On this STM32 serie, the only COMP instance that can be enabled + * using this function is COMP1. + * COMP2 is enabled by setting input minus. + * Refer to function @ref LL_COMP_SetInputMinus(). + * @retval None + */ +__STATIC_INLINE void LL_COMP_Enable(COMP_TypeDef *COMPx) +{ + /* On this STM32 serie, only COMP instance COMP1 has a dedicated bit */ + /* for comparator enable. Check of comparator instance is implemented */ + /* to modify register only if COMP1 is selected. */ + SET_BIT(COMP->CSR, __COMP_IS_INSTANCE_ODD(COMPx) << LL_COMP_ENABLE_COMP1_BITOFFSET_POS); +} + +/** + * @brief Disable comparator instance. + * @note On this STM32 serie, COMP2 is disabled by clearing input minus + * selection. If COMP2 must be enabled afterwards, input minus must + * be set. Refer to function @ref LL_COMP_SetInputMinus(). + * @rmtoll CSR COMP1EN LL_COMP_Disable\n + * CSR COMP_CSR_INSEL LL_COMP_Disable + * @param COMPx Comparator instance + * @retval None + */ +__STATIC_INLINE void LL_COMP_Disable(COMP_TypeDef *COMPx) +{ + /* Note: On this STM32 serie, COMP2 is enabled by setting input minus. */ + /* Refer to function @ref LL_COMP_SetInputMinus(). */ + /* To disable COMP2, bitfield of input minus selection is reset. */ + CLEAR_BIT(COMP->CSR, (COMP_CSR_CMP1EN * __COMP_IS_INSTANCE_ODD(COMPx)) | (COMP_CSR_INSEL * __COMP_IS_INSTANCE_EVEN(COMPx))); +} + +/** + * @brief Get comparator enable state + * (0: COMP is disabled, 1: COMP is enabled) + * @rmtoll CSR COMP1EN LL_COMP_IsEnabled\n + * CSR COMP_CSR_INSEL LL_COMP_IsEnabled + * @param COMPx Comparator instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_COMP_IsEnabled(COMP_TypeDef *COMPx) +{ + return (READ_BIT(COMP->CSR, (COMP_CSR_CMP1EN * __COMP_IS_INSTANCE_ODD(COMPx)) | (COMP_CSR_INSEL * __COMP_IS_INSTANCE_EVEN(COMPx))) != (0U)); +} + +/** + * @brief Read comparator instance output level. + * @note On this STM32 serie, comparator polarity is not settable + * and not inverted: + * - Comparator output is low when the input plus + * is at a lower voltage than the input minus + * - Comparator output is high when the input plus + * is at a higher voltage than the input minus + * @rmtoll CSR CMP1OUT LL_COMP_ReadOutputLevel\n + * CSR CMP2OUT LL_COMP_ReadOutputLevel + * @param COMPx Comparator instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_COMP_OUTPUT_LEVEL_LOW + * @arg @ref LL_COMP_OUTPUT_LEVEL_HIGH + */ +__STATIC_INLINE uint32_t LL_COMP_ReadOutputLevel(COMP_TypeDef *COMPx) +{ + return (uint32_t)(READ_BIT(COMP->CSR, + ((__COMP_IS_INSTANCE_ODD(COMPx) << LL_COMP_OUTPUT_LEVEL_COMP1_BITOFFSET_POS) | (__COMP_IS_INSTANCE_EVEN(COMPx) << LL_COMP_OUTPUT_LEVEL_COMP2_BITOFFSET_POS))) + >> (LL_COMP_OUTPUT_LEVEL_COMP1_BITOFFSET_POS + ((LL_COMP_OUTPUT_LEVEL_COMP2_BITOFFSET_POS - LL_COMP_OUTPUT_LEVEL_COMP1_BITOFFSET_POS) * __COMP_IS_INSTANCE_EVEN(COMPx))) + ); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup COMP_LL_EF_Init Initialization and de-initialization functions + * @{ + */ + +ErrorStatus LL_COMP_DeInit(COMP_TypeDef *COMPx); +ErrorStatus LL_COMP_Init(COMP_TypeDef *COMPx, LL_COMP_InitTypeDef *COMP_InitStruct); +void LL_COMP_StructInit(LL_COMP_InitTypeDef *COMP_InitStruct); + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* COMP1 || COMP2 */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32L1xx_LL_COMP_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_ll_cortex.h b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_ll_cortex.h new file mode 100755 index 0000000..4a507da --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_ll_cortex.h @@ -0,0 +1,657 @@ +/** + ****************************************************************************** + * @file stm32l1xx_ll_cortex.h + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief Header file of CORTEX LL module. + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The LL CORTEX driver contains a set of generic APIs that can be + used by user: + (+) SYSTICK configuration used by @ref LL_mDelay and @ref LL_Init1msTick + functions + (+) Low power mode configuration (SCB register of Cortex-MCU) + (+) MPU API to configure and enable regions + (+) API to access to MCU info (CPUID register) + (+) API to enable fault handler (SHCSR accesses) + + @endverbatim + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L1xx_LL_CORTEX_H +#define __STM32L1xx_LL_CORTEX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx.h" + +/** @addtogroup STM32L1xx_LL_Driver + * @{ + */ + +/** @defgroup CORTEX_LL CORTEX + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ + +/* Private macros ------------------------------------------------------------*/ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup CORTEX_LL_Exported_Constants CORTEX Exported Constants + * @{ + */ + +/** @defgroup CORTEX_LL_EC_CLKSOURCE_HCLK SYSTICK Clock Source + * @{ + */ +#define LL_SYSTICK_CLKSOURCE_HCLK_DIV8 ((uint32_t)0x00000000U) /*!< AHB clock divided by 8 selected as SysTick clock source.*/ +#define LL_SYSTICK_CLKSOURCE_HCLK ((uint32_t)SysTick_CTRL_CLKSOURCE_Msk) /*!< AHB clock selected as SysTick clock source. */ +/** + * @} + */ + +/** @defgroup CORTEX_LL_EC_FAULT Handler Fault type + * @{ + */ +#define LL_HANDLER_FAULT_USG SCB_SHCSR_USGFAULTENA_Msk /*!< Usage fault */ +#define LL_HANDLER_FAULT_BUS SCB_SHCSR_BUSFAULTENA_Msk /*!< Bus fault */ +#define LL_HANDLER_FAULT_MEM SCB_SHCSR_MEMFAULTENA_Msk /*!< Memory management fault */ +/** + * @} + */ + +#if __MPU_PRESENT + +/** @defgroup CORTEX_LL_EC_CTRL_HFNMI_PRIVDEF MPU Control + * @{ + */ +#define LL_MPU_CTRL_HFNMI_PRIVDEF_NONE ((uint32_t)0x00000000U) /*!< Disable NMI and privileged SW access */ +#define LL_MPU_CTRL_HARDFAULT_NMI MPU_CTRL_HFNMIENA_Msk /*!< Enables the operation of MPU during hard fault, NMI, and FAULTMASK handlers */ +#define LL_MPU_CTRL_PRIVILEGED_DEFAULT MPU_CTRL_PRIVDEFENA_Msk /*!< Enable privileged software access to default memory map */ +#define LL_MPU_CTRL_HFNMI_PRIVDEF (MPU_CTRL_HFNMIENA_Msk | MPU_CTRL_PRIVDEFENA_Msk) /*!< Enable NMI and privileged SW access */ +/** + * @} + */ + +/** @defgroup CORTEX_LL_EC_REGION MPU Region Number + * @{ + */ +#define LL_MPU_REGION_NUMBER0 ((uint32_t)0x00U) /*!< REGION Number 0 */ +#define LL_MPU_REGION_NUMBER1 ((uint32_t)0x01U) /*!< REGION Number 1 */ +#define LL_MPU_REGION_NUMBER2 ((uint32_t)0x02U) /*!< REGION Number 2 */ +#define LL_MPU_REGION_NUMBER3 ((uint32_t)0x03U) /*!< REGION Number 3 */ +#define LL_MPU_REGION_NUMBER4 ((uint32_t)0x04U) /*!< REGION Number 4 */ +#define LL_MPU_REGION_NUMBER5 ((uint32_t)0x05U) /*!< REGION Number 5 */ +#define LL_MPU_REGION_NUMBER6 ((uint32_t)0x06U) /*!< REGION Number 6 */ +#define LL_MPU_REGION_NUMBER7 ((uint32_t)0x07U) /*!< REGION Number 7 */ +/** + * @} + */ + +/** @defgroup CORTEX_LL_EC_REGION_SIZE MPU Region Size + * @{ + */ +#define LL_MPU_REGION_SIZE_32B ((uint32_t)(0x04U << MPU_RASR_SIZE_Pos)) /*!< 32B Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_64B ((uint32_t)(0x05U << MPU_RASR_SIZE_Pos)) /*!< 64B Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_128B ((uint32_t)(0x06U << MPU_RASR_SIZE_Pos)) /*!< 128B Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_256B ((uint32_t)(0x07U << MPU_RASR_SIZE_Pos)) /*!< 256B Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_512B ((uint32_t)(0x08U << MPU_RASR_SIZE_Pos)) /*!< 512B Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_1KB ((uint32_t)(0x09U << MPU_RASR_SIZE_Pos)) /*!< 1KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_2KB ((uint32_t)(0x0AU << MPU_RASR_SIZE_Pos)) /*!< 2KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_4KB ((uint32_t)(0x0BU << MPU_RASR_SIZE_Pos)) /*!< 4KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_8KB ((uint32_t)(0x0CU << MPU_RASR_SIZE_Pos)) /*!< 8KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_16KB ((uint32_t)(0x0DU << MPU_RASR_SIZE_Pos)) /*!< 16KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_32KB ((uint32_t)(0x0EU << MPU_RASR_SIZE_Pos)) /*!< 32KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_64KB ((uint32_t)(0x0FU << MPU_RASR_SIZE_Pos)) /*!< 64KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_128KB ((uint32_t)(0x10U << MPU_RASR_SIZE_Pos)) /*!< 128KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_256KB ((uint32_t)(0x11U << MPU_RASR_SIZE_Pos)) /*!< 256KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_512KB ((uint32_t)(0x12U << MPU_RASR_SIZE_Pos)) /*!< 512KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_1MB ((uint32_t)(0x13U << MPU_RASR_SIZE_Pos)) /*!< 1MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_2MB ((uint32_t)(0x14U << MPU_RASR_SIZE_Pos)) /*!< 2MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_4MB ((uint32_t)(0x15U << MPU_RASR_SIZE_Pos)) /*!< 4MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_8MB ((uint32_t)(0x16U << MPU_RASR_SIZE_Pos)) /*!< 8MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_16MB ((uint32_t)(0x17U << MPU_RASR_SIZE_Pos)) /*!< 16MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_32MB ((uint32_t)(0x18U << MPU_RASR_SIZE_Pos)) /*!< 32MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_64MB ((uint32_t)(0x19U << MPU_RASR_SIZE_Pos)) /*!< 64MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_128MB ((uint32_t)(0x1AU << MPU_RASR_SIZE_Pos)) /*!< 128MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_256MB ((uint32_t)(0x1BU << MPU_RASR_SIZE_Pos)) /*!< 256MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_512MB ((uint32_t)(0x1CU << MPU_RASR_SIZE_Pos)) /*!< 512MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_1GB ((uint32_t)(0x1DU << MPU_RASR_SIZE_Pos)) /*!< 1GB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_2GB ((uint32_t)(0x1EU << MPU_RASR_SIZE_Pos)) /*!< 2GB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_4GB ((uint32_t)(0x1FU << MPU_RASR_SIZE_Pos)) /*!< 4GB Size of the MPU protection region */ +/** + * @} + */ + +/** @defgroup CORTEX_LL_EC_REGION_PRIVILEDGES MPU Region Privileges + * @{ + */ +#define LL_MPU_REGION_NO_ACCESS ((uint32_t)(0x00U << MPU_RASR_AP_Pos)) /*!< No access*/ +#define LL_MPU_REGION_PRIV_RW ((uint32_t)(0x01U << MPU_RASR_AP_Pos)) /*!< RW privileged (privileged access only)*/ +#define LL_MPU_REGION_PRIV_RW_URO ((uint32_t)(0x02U << MPU_RASR_AP_Pos)) /*!< RW privileged - RO user (Write in a user program generates a fault) */ +#define LL_MPU_REGION_FULL_ACCESS ((uint32_t)(0x03U << MPU_RASR_AP_Pos)) /*!< RW privileged & user (Full access) */ +#define LL_MPU_REGION_PRIV_RO ((uint32_t)(0x05U << MPU_RASR_AP_Pos)) /*!< RO privileged (privileged read only)*/ +#define LL_MPU_REGION_PRIV_RO_URO ((uint32_t)(0x06U << MPU_RASR_AP_Pos)) /*!< RO privileged & user (read only) */ +/** + * @} + */ + +/** @defgroup CORTEX_LL_EC_TEX MPU TEX Level + * @{ + */ +#define LL_MPU_TEX_LEVEL0 ((uint32_t)(0x00U << MPU_RASR_TEX_Pos)) /*!< b000 for TEX bits */ +#define LL_MPU_TEX_LEVEL1 ((uint32_t)(0x01U << MPU_RASR_TEX_Pos)) /*!< b001 for TEX bits */ +#define LL_MPU_TEX_LEVEL2 ((uint32_t)(0x02U << MPU_RASR_TEX_Pos)) /*!< b010 for TEX bits */ +#define LL_MPU_TEX_LEVEL4 ((uint32_t)(0x04U << MPU_RASR_TEX_Pos)) /*!< b100 for TEX bits */ +/** + * @} + */ + +/** @defgroup CORTEX_LL_EC_INSTRUCTION_ACCESS MPU Instruction Access + * @{ + */ +#define LL_MPU_INSTRUCTION_ACCESS_ENABLE ((uint32_t)0x00U) /*!< Instruction fetches enabled */ +#define LL_MPU_INSTRUCTION_ACCESS_DISABLE MPU_RASR_XN_Msk /*!< Instruction fetches disabled*/ +/** + * @} + */ + +/** @defgroup CORTEX_LL_EC_SHAREABLE_ACCESS MPU Shareable Access + * @{ + */ +#define LL_MPU_ACCESS_SHAREABLE MPU_RASR_S_Msk /*!< Shareable memory attribute */ +#define LL_MPU_ACCESS_NOT_SHAREABLE ((uint32_t)0x00U) /*!< Not Shareable memory attribute */ +/** + * @} + */ + +/** @defgroup CORTEX_LL_EC_CACHEABLE_ACCESS MPU Cacheable Access + * @{ + */ +#define LL_MPU_ACCESS_CACHEABLE MPU_RASR_C_Msk /*!< Cacheable memory attribute */ +#define LL_MPU_ACCESS_NOT_CACHEABLE ((uint32_t)0x00U) /*!< Not Cacheable memory attribute */ +/** + * @} + */ + +/** @defgroup CORTEX_LL_EC_BUFFERABLE_ACCESS MPU Bufferable Access + * @{ + */ +#define LL_MPU_ACCESS_BUFFERABLE MPU_RASR_B_Msk /*!< Bufferable memory attribute */ +#define LL_MPU_ACCESS_NOT_BUFFERABLE ((uint32_t)0x00U) /*!< Not Bufferable memory attribute */ +/** + * @} + */ +#endif /* __MPU_PRESENT */ +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup CORTEX_LL_Exported_Functions CORTEX Exported Functions + * @{ + */ + +/** @defgroup CORTEX_LL_EF_SYSTICK SYSTICK + * @{ + */ + +/** + * @brief This function checks if the Systick counter flag is active or not. + * @note It can be used in timeout function on application side. + * @rmtoll STK_CTRL COUNTFLAG LL_SYSTICK_IsActiveCounterFlag + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSTICK_IsActiveCounterFlag(void) +{ + return ((SysTick->CTRL & SysTick_CTRL_COUNTFLAG_Msk) == (SysTick_CTRL_COUNTFLAG_Msk)); +} + +/** + * @brief Configures the SysTick clock source + * @rmtoll STK_CTRL CLKSOURCE LL_SYSTICK_SetClkSource + * @param Source This parameter can be one of the following values: + * @arg @ref LL_SYSTICK_CLKSOURCE_HCLK_DIV8 + * @arg @ref LL_SYSTICK_CLKSOURCE_HCLK + * @retval None + */ +__STATIC_INLINE void LL_SYSTICK_SetClkSource(uint32_t Source) +{ + if (Source == LL_SYSTICK_CLKSOURCE_HCLK) + { + SET_BIT(SysTick->CTRL, LL_SYSTICK_CLKSOURCE_HCLK); + } + else + { + CLEAR_BIT(SysTick->CTRL, LL_SYSTICK_CLKSOURCE_HCLK); + } +} + +/** + * @brief Get the SysTick clock source + * @rmtoll STK_CTRL CLKSOURCE LL_SYSTICK_GetClkSource + * @retval Returned value can be one of the following values: + * @arg @ref LL_SYSTICK_CLKSOURCE_HCLK_DIV8 + * @arg @ref LL_SYSTICK_CLKSOURCE_HCLK + */ +__STATIC_INLINE uint32_t LL_SYSTICK_GetClkSource(void) +{ + return READ_BIT(SysTick->CTRL, LL_SYSTICK_CLKSOURCE_HCLK); +} + +/** + * @brief Enable SysTick exception request + * @rmtoll STK_CTRL TICKINT LL_SYSTICK_EnableIT + * @retval None + */ +__STATIC_INLINE void LL_SYSTICK_EnableIT(void) +{ + SET_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk); +} + +/** + * @brief Disable SysTick exception request + * @rmtoll STK_CTRL TICKINT LL_SYSTICK_DisableIT + * @retval None + */ +__STATIC_INLINE void LL_SYSTICK_DisableIT(void) +{ + CLEAR_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk); +} + +/** + * @brief Checks if the SYSTICK interrupt is enabled or disabled. + * @rmtoll STK_CTRL TICKINT LL_SYSTICK_IsEnabledIT + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSTICK_IsEnabledIT(void) +{ + return (READ_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk) == (SysTick_CTRL_TICKINT_Msk)); +} + +/** + * @} + */ + +/** @defgroup CORTEX_LL_EF_LOW_POWER_MODE LOW POWER MODE + * @{ + */ + +/** + * @brief Processor uses sleep as its low power mode + * @rmtoll SCB_SCR SLEEPDEEP LL_LPM_EnableSleep + * @retval None + */ +__STATIC_INLINE void LL_LPM_EnableSleep(void) +{ + /* Clear SLEEPDEEP bit of Cortex System Control Register */ + CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); +} + +/** + * @brief Processor uses deep sleep as its low power mode + * @rmtoll SCB_SCR SLEEPDEEP LL_LPM_EnableDeepSleep + * @retval None + */ +__STATIC_INLINE void LL_LPM_EnableDeepSleep(void) +{ + /* Set SLEEPDEEP bit of Cortex System Control Register */ + SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); +} + +/** + * @brief Configures sleep-on-exit when returning from Handler mode to Thread mode. + * @note Setting this bit to 1 enables an interrupt-driven application to avoid returning to an + * empty main application. + * @rmtoll SCB_SCR SLEEPONEXIT LL_LPM_EnableSleepOnExit + * @retval None + */ +__STATIC_INLINE void LL_LPM_EnableSleepOnExit(void) +{ + /* Set SLEEPONEXIT bit of Cortex System Control Register */ + SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk)); +} + +/** + * @brief Do not sleep when returning to Thread mode. + * @rmtoll SCB_SCR SLEEPONEXIT LL_LPM_DisableSleepOnExit + * @retval None + */ +__STATIC_INLINE void LL_LPM_DisableSleepOnExit(void) +{ + /* Clear SLEEPONEXIT bit of Cortex System Control Register */ + CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk)); +} + +/** + * @brief Enabled events and all interrupts, including disabled interrupts, can wakeup the + * processor. + * @rmtoll SCB_SCR SEVEONPEND LL_LPM_EnableEventOnPend + * @retval None + */ +__STATIC_INLINE void LL_LPM_EnableEventOnPend(void) +{ + /* Set SEVEONPEND bit of Cortex System Control Register */ + SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk)); +} + +/** + * @brief Only enabled interrupts or events can wakeup the processor, disabled interrupts are + * excluded + * @rmtoll SCB_SCR SEVEONPEND LL_LPM_DisableEventOnPend + * @retval None + */ +__STATIC_INLINE void LL_LPM_DisableEventOnPend(void) +{ + /* Clear SEVEONPEND bit of Cortex System Control Register */ + CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk)); +} + +/** + * @} + */ + +/** @defgroup CORTEX_LL_EF_HANDLER HANDLER + * @{ + */ + +/** + * @brief Enable a fault in System handler control register (SHCSR) + * @rmtoll SCB_SHCSR MEMFAULTENA LL_HANDLER_EnableFault + * @param Fault This parameter can be a combination of the following values: + * @arg @ref LL_HANDLER_FAULT_USG + * @arg @ref LL_HANDLER_FAULT_BUS + * @arg @ref LL_HANDLER_FAULT_MEM + * @retval None + */ +__STATIC_INLINE void LL_HANDLER_EnableFault(uint32_t Fault) +{ + /* Enable the system handler fault */ + SET_BIT(SCB->SHCSR, Fault); +} + +/** + * @brief Disable a fault in System handler control register (SHCSR) + * @rmtoll SCB_SHCSR MEMFAULTENA LL_HANDLER_DisableFault + * @param Fault This parameter can be a combination of the following values: + * @arg @ref LL_HANDLER_FAULT_USG + * @arg @ref LL_HANDLER_FAULT_BUS + * @arg @ref LL_HANDLER_FAULT_MEM + * @retval None + */ +__STATIC_INLINE void LL_HANDLER_DisableFault(uint32_t Fault) +{ + /* Disable the system handler fault */ + CLEAR_BIT(SCB->SHCSR, Fault); +} + +/** + * @} + */ + +/** @defgroup CORTEX_LL_EF_MCU_INFO MCU INFO + * @{ + */ + +/** + * @brief Get Implementer code + * @rmtoll SCB_CPUID IMPLEMENTER LL_CPUID_GetImplementer + * @retval Value should be equal to 0x41 for ARM + */ +__STATIC_INLINE uint32_t LL_CPUID_GetImplementer(void) +{ + return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_IMPLEMENTER_Msk) >> SCB_CPUID_IMPLEMENTER_Pos); +} + +/** + * @brief Get Variant number (The r value in the rnpn product revision identifier) + * @rmtoll SCB_CPUID VARIANT LL_CPUID_GetVariant + * @retval Value between 0 and 255 (0x1: revision 1, 0x2: revision 2) + */ +__STATIC_INLINE uint32_t LL_CPUID_GetVariant(void) +{ + return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_VARIANT_Msk) >> SCB_CPUID_VARIANT_Pos); +} + +/** + * @brief Get Constant number + * @rmtoll SCB_CPUID ARCHITECTURE LL_CPUID_GetConstant + * @retval Value should be equal to 0xF for Cortex-M3 devices + */ +__STATIC_INLINE uint32_t LL_CPUID_GetConstant(void) +{ + return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_ARCHITECTURE_Msk) >> SCB_CPUID_ARCHITECTURE_Pos); +} + +/** + * @brief Get Part number + * @rmtoll SCB_CPUID PARTNO LL_CPUID_GetParNo + * @retval Value should be equal to 0xC23 for Cortex-M3 + */ +__STATIC_INLINE uint32_t LL_CPUID_GetParNo(void) +{ + return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_PARTNO_Msk) >> SCB_CPUID_PARTNO_Pos); +} + +/** + * @brief Get Revision number (The p value in the rnpn product revision identifier, indicates patch release) + * @rmtoll SCB_CPUID REVISION LL_CPUID_GetRevision + * @retval Value between 0 and 255 (0x0: patch 0, 0x1: patch 1) + */ +__STATIC_INLINE uint32_t LL_CPUID_GetRevision(void) +{ + return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_REVISION_Msk) >> SCB_CPUID_REVISION_Pos); +} + +/** + * @} + */ + +#if __MPU_PRESENT +/** @defgroup CORTEX_LL_EF_MPU MPU + * @{ + */ + +/** + * @brief Enable MPU with input options + * @rmtoll MPU_CTRL ENABLE LL_MPU_Enable + * @param Options This parameter can be one of the following values: + * @arg @ref LL_MPU_CTRL_HFNMI_PRIVDEF_NONE + * @arg @ref LL_MPU_CTRL_HARDFAULT_NMI + * @arg @ref LL_MPU_CTRL_PRIVILEGED_DEFAULT + * @arg @ref LL_MPU_CTRL_HFNMI_PRIVDEF + * @retval None + */ +__STATIC_INLINE void LL_MPU_Enable(uint32_t Options) +{ + /* Enable the MPU*/ + WRITE_REG(MPU->CTRL, (MPU_CTRL_ENABLE_Msk | Options)); + /* Ensure MPU settings take effects */ + __DSB(); + /* Sequence instruction fetches using update settings */ + __ISB(); +} + +/** + * @brief Disable MPU + * @rmtoll MPU_CTRL ENABLE LL_MPU_Disable + * @retval None + */ +__STATIC_INLINE void LL_MPU_Disable(void) +{ + /* Make sure outstanding transfers are done */ + __DMB(); + /* Disable MPU*/ + WRITE_REG(MPU->CTRL, 0U); +} + +/** + * @brief Check if MPU is enabled or not + * @rmtoll MPU_CTRL ENABLE LL_MPU_IsEnabled + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_MPU_IsEnabled(void) +{ + return (READ_BIT(MPU->CTRL, MPU_CTRL_ENABLE_Msk) == (MPU_CTRL_ENABLE_Msk)); +} + +/** + * @brief Enable a MPU region + * @rmtoll MPU_RASR ENABLE LL_MPU_EnableRegion + * @param Region This parameter can be one of the following values: + * @arg @ref LL_MPU_REGION_NUMBER0 + * @arg @ref LL_MPU_REGION_NUMBER1 + * @arg @ref LL_MPU_REGION_NUMBER2 + * @arg @ref LL_MPU_REGION_NUMBER3 + * @arg @ref LL_MPU_REGION_NUMBER4 + * @arg @ref LL_MPU_REGION_NUMBER5 + * @arg @ref LL_MPU_REGION_NUMBER6 + * @arg @ref LL_MPU_REGION_NUMBER7 + * @retval None + */ +__STATIC_INLINE void LL_MPU_EnableRegion(uint32_t Region) +{ + /* Set Region number */ + WRITE_REG(MPU->RNR, Region); + /* Enable the MPU region */ + SET_BIT(MPU->RASR, MPU_RASR_ENABLE_Msk); +} + +/** + * @brief Configure and enable a region + * @rmtoll MPU_RNR REGION LL_MPU_ConfigRegion\n + * MPU_RBAR REGION LL_MPU_ConfigRegion\n + * MPU_RBAR ADDR LL_MPU_ConfigRegion\n + * MPU_RASR XN LL_MPU_ConfigRegion\n + * MPU_RASR AP LL_MPU_ConfigRegion\n + * MPU_RASR S LL_MPU_ConfigRegion\n + * MPU_RASR C LL_MPU_ConfigRegion\n + * MPU_RASR B LL_MPU_ConfigRegion\n + * MPU_RASR SIZE LL_MPU_ConfigRegion + * @param Region This parameter can be one of the following values: + * @arg @ref LL_MPU_REGION_NUMBER0 + * @arg @ref LL_MPU_REGION_NUMBER1 + * @arg @ref LL_MPU_REGION_NUMBER2 + * @arg @ref LL_MPU_REGION_NUMBER3 + * @arg @ref LL_MPU_REGION_NUMBER4 + * @arg @ref LL_MPU_REGION_NUMBER5 + * @arg @ref LL_MPU_REGION_NUMBER6 + * @arg @ref LL_MPU_REGION_NUMBER7 + * @param Address Value of region base address + * @param SubRegionDisable Sub-region disable value between Min_Data = 0x00 and Max_Data = 0xFF + * @param Attributes This parameter can be a combination of the following values: + * @arg @ref LL_MPU_REGION_SIZE_32B or @ref LL_MPU_REGION_SIZE_64B or @ref LL_MPU_REGION_SIZE_128B or @ref LL_MPU_REGION_SIZE_256B or @ref LL_MPU_REGION_SIZE_512B + * or @ref LL_MPU_REGION_SIZE_1KB or @ref LL_MPU_REGION_SIZE_2KB or @ref LL_MPU_REGION_SIZE_4KB or @ref LL_MPU_REGION_SIZE_8KB or @ref LL_MPU_REGION_SIZE_16KB + * or @ref LL_MPU_REGION_SIZE_32KB or @ref LL_MPU_REGION_SIZE_64KB or @ref LL_MPU_REGION_SIZE_128KB or @ref LL_MPU_REGION_SIZE_256KB or @ref LL_MPU_REGION_SIZE_512KB + * or @ref LL_MPU_REGION_SIZE_1MB or @ref LL_MPU_REGION_SIZE_2MB or @ref LL_MPU_REGION_SIZE_4MB or @ref LL_MPU_REGION_SIZE_8MB or @ref LL_MPU_REGION_SIZE_16MB + * or @ref LL_MPU_REGION_SIZE_32MB or @ref LL_MPU_REGION_SIZE_64MB or @ref LL_MPU_REGION_SIZE_128MB or @ref LL_MPU_REGION_SIZE_256MB or @ref LL_MPU_REGION_SIZE_512MB + * or @ref LL_MPU_REGION_SIZE_1GB or @ref LL_MPU_REGION_SIZE_2GB or @ref LL_MPU_REGION_SIZE_4GB + * @arg @ref LL_MPU_REGION_NO_ACCESS or @ref LL_MPU_REGION_PRIV_RW or @ref LL_MPU_REGION_PRIV_RW_URO or @ref LL_MPU_REGION_FULL_ACCESS + * or @ref LL_MPU_REGION_PRIV_RO or @ref LL_MPU_REGION_PRIV_RO_URO + * @arg @ref LL_MPU_TEX_LEVEL0 or @ref LL_MPU_TEX_LEVEL1 or @ref LL_MPU_TEX_LEVEL2 or @ref LL_MPU_TEX_LEVEL4 + * @arg @ref LL_MPU_INSTRUCTION_ACCESS_ENABLE or @ref LL_MPU_INSTRUCTION_ACCESS_DISABLE + * @arg @ref LL_MPU_ACCESS_SHAREABLE or @ref LL_MPU_ACCESS_NOT_SHAREABLE + * @arg @ref LL_MPU_ACCESS_CACHEABLE or @ref LL_MPU_ACCESS_NOT_CACHEABLE + * @arg @ref LL_MPU_ACCESS_BUFFERABLE or @ref LL_MPU_ACCESS_NOT_BUFFERABLE + * @retval None + */ +__STATIC_INLINE void LL_MPU_ConfigRegion(uint32_t Region, uint32_t SubRegionDisable, uint32_t Address, uint32_t Attributes) +{ + /* Set Region number */ + WRITE_REG(MPU->RNR, Region); + /* Set base address */ + WRITE_REG(MPU->RBAR, (Address & 0xFFFFFFE0U)); + /* Configure MPU */ + WRITE_REG(MPU->RASR, (MPU_RASR_ENABLE_Msk | Attributes | SubRegionDisable << MPU_RASR_SRD_Pos)); +} + +/** + * @brief Disable a region + * @rmtoll MPU_RNR REGION LL_MPU_DisableRegion\n + * MPU_RASR ENABLE LL_MPU_DisableRegion + * @param Region This parameter can be one of the following values: + * @arg @ref LL_MPU_REGION_NUMBER0 + * @arg @ref LL_MPU_REGION_NUMBER1 + * @arg @ref LL_MPU_REGION_NUMBER2 + * @arg @ref LL_MPU_REGION_NUMBER3 + * @arg @ref LL_MPU_REGION_NUMBER4 + * @arg @ref LL_MPU_REGION_NUMBER5 + * @arg @ref LL_MPU_REGION_NUMBER6 + * @arg @ref LL_MPU_REGION_NUMBER7 + * @retval None + */ +__STATIC_INLINE void LL_MPU_DisableRegion(uint32_t Region) +{ + /* Set Region number */ + WRITE_REG(MPU->RNR, Region); + /* Disable the MPU region */ + CLEAR_BIT(MPU->RASR, MPU_RASR_ENABLE_Msk); +} + +/** + * @} + */ + +#endif /* __MPU_PRESENT */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32L1xx_LL_CORTEX_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_ll_crc.h b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_ll_crc.h new file mode 100755 index 0000000..5cd083b --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_ll_crc.h @@ -0,0 +1,212 @@ +/** + ****************************************************************************** + * @file stm32l1xx_ll_crc.h + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief Header file of CRC LL module. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L1xx_LL_CRC_H +#define __STM32L1xx_LL_CRC_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx.h" + +/** @addtogroup STM32L1xx_LL_Driver + * @{ + */ + +#if defined(CRC) + +/** @defgroup CRC_LL CRC + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup CRC_LL_Exported_Macros CRC Exported Macros + * @{ + */ + +/** @defgroup CRC_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in CRC register + * @param __INSTANCE__ CRC Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_CRC_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in CRC register + * @param __INSTANCE__ CRC Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_CRC_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** + * @} + */ + + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup CRC_LL_Exported_Functions CRC Exported Functions + * @{ + */ + +/** @defgroup CRC_LL_EF_Configuration CRC Configuration functions + * @{ + */ + +/** + * @brief Reset the CRC calculation unit. + * @rmtoll CR RESET LL_CRC_ResetCRCCalculationUnit + * @param CRCx CRC Instance + * @retval None + */ +__STATIC_INLINE void LL_CRC_ResetCRCCalculationUnit(CRC_TypeDef *CRCx) +{ + WRITE_REG(CRCx->CR, CRC_CR_RESET); +} + +/** + * @} + */ + +/** @defgroup CRC_LL_EF_Data_Management Data_Management + * @{ + */ + +/** + * @brief Write given 32-bit data to the CRC calculator + * @rmtoll DR DR LL_CRC_FeedData32 + * @param CRCx CRC Instance + * @param InData value to be provided to CRC calculator between between Min_Data=0 and Max_Data=0xFFFFFFFF + * @retval None + */ +__STATIC_INLINE void LL_CRC_FeedData32(CRC_TypeDef *CRCx, uint32_t InData) +{ + WRITE_REG(CRCx->DR, InData); +} + +/** + * @brief Return current CRC calculation result. 32 bits value is returned. + * @rmtoll DR DR LL_CRC_ReadData32 + * @param CRCx CRC Instance + * @retval Current CRC calculation result as stored in CRC_DR register (32 bits). + */ +__STATIC_INLINE uint32_t LL_CRC_ReadData32(CRC_TypeDef *CRCx) +{ + return (uint32_t)(READ_REG(CRCx->DR)); +} + +/** + * @brief Return data stored in the Independent Data(IDR) register. + * @note This register can be used as a temporary storage location for one byte. + * @rmtoll IDR IDR LL_CRC_Read_IDR + * @param CRCx CRC Instance + * @retval Value stored in CRC_IDR register (General-purpose 8-bit data register). + */ +__STATIC_INLINE uint32_t LL_CRC_Read_IDR(CRC_TypeDef *CRCx) +{ + return (uint32_t)(READ_REG(CRCx->IDR)); +} + +/** + * @brief Store data in the Independent Data(IDR) register. + * @note This register can be used as a temporary storage location for one byte. + * @rmtoll IDR IDR LL_CRC_Write_IDR + * @param CRCx CRC Instance + * @param InData value to be stored in CRC_IDR register (8-bit) between between Min_Data=0 and Max_Data=0xFF + * @retval None + */ +__STATIC_INLINE void LL_CRC_Write_IDR(CRC_TypeDef *CRCx, uint32_t InData) +{ + *((uint8_t __IO *)(&CRCx->IDR)) = (uint8_t) InData; +} +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup CRC_LL_EF_Init Initialization and de-initialization functions + * @{ + */ + +ErrorStatus LL_CRC_DeInit(CRC_TypeDef *CRCx); + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined(CRC) */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32L1xx_LL_CRC_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_ll_dac.h b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_ll_dac.h new file mode 100755 index 0000000..d84b29b --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_ll_dac.h @@ -0,0 +1,1313 @@ +/** + ****************************************************************************** + * @file stm32l1xx_ll_dac.h + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief Header file of DAC LL module. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L1xx_LL_DAC_H +#define __STM32L1xx_LL_DAC_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx.h" + +/** @addtogroup STM32L1xx_LL_Driver + * @{ + */ + +#if defined (DAC1) + +/** @defgroup DAC_LL DAC + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup DAC_LL_Private_Constants DAC Private Constants + * @{ + */ + +/* Internal masks for DAC channels definition */ +/* To select into literal LL_DAC_CHANNEL_x the relevant bits for: */ +/* - channel bits position into register CR */ +/* - channel bits position into register SWTRIG */ +/* - channel register offset of data holding register DHRx */ +/* - channel register offset of data output register DORx */ +#define DAC_CR_CH1_BITOFFSET ((uint32_t) 0U) /* Position of channel bits into registers CR, MCR, CCR, SHHR, SHRR of channel 1 */ +#define DAC_CR_CH2_BITOFFSET ((uint32_t)16U) /* Position of channel bits into registers CR, MCR, CCR, SHHR, SHRR of channel 2 */ +#define DAC_CR_CHX_BITOFFSET_MASK (DAC_CR_CH1_BITOFFSET | DAC_CR_CH2_BITOFFSET) + +#define DAC_SWTR_CH1 (DAC_SWTRIGR_SWTRIG1) /* Channel bit into register SWTRIGR of channel 1. This bit is into area of LL_DAC_CR_CHx_BITOFFSET but excluded by mask DAC_CR_CHX_BITOFFSET_MASK (done to be enable to trig SW start of both DAC channels simultaneously). */ +#define DAC_SWTR_CH2 (DAC_SWTRIGR_SWTRIG2) /* Channel bit into register SWTRIGR of channel 2. This bit is into area of LL_DAC_CR_CHx_BITOFFSET but excluded by mask DAC_CR_CHX_BITOFFSET_MASK (done to be enable to trig SW start of both DAC channels simultaneously). */ +#define DAC_SWTR_CHX_MASK (DAC_SWTR_CH1 | DAC_SWTR_CH2) + +#define DAC_REG_DHR12R1_REGOFFSET ((uint32_t)0x00000000U) /* Register DHR12Rx channel 1 taken as reference */ +#define DAC_REG_DHR12L1_REGOFFSET ((uint32_t)0x00100000U) /* Register offset of DHR12Lx channel 1 versus DHR12Rx channel 1 (shifted left of 20 bits) */ +#define DAC_REG_DHR8R1_REGOFFSET ((uint32_t)0x02000000U) /* Register offset of DHR8Rx channel 1 versus DHR12Rx channel 1 (shifted left of 24 bits) */ +#define DAC_REG_DHR12R2_REGOFFSET ((uint32_t)0x00030000U) /* Register offset of DHR12Rx channel 2 versus DHR12Rx channel 1 (shifted left of 16 bits) */ +#define DAC_REG_DHR12L2_REGOFFSET ((uint32_t)0x00400000U) /* Register offset of DHR12Lx channel 2 versus DHR12Rx channel 1 (shifted left of 20 bits) */ +#define DAC_REG_DHR8R2_REGOFFSET ((uint32_t)0x05000000U) /* Register offset of DHR8Rx channel 2 versus DHR12Rx channel 1 (shifted left of 24 bits) */ +#define DAC_REG_DHR12RX_REGOFFSET_MASK ((uint32_t)0x000F0000U) +#define DAC_REG_DHR12LX_REGOFFSET_MASK ((uint32_t)0x00F00000U) +#define DAC_REG_DHR8RX_REGOFFSET_MASK ((uint32_t)0x0F000000U) +#define DAC_REG_DHRX_REGOFFSET_MASK (DAC_REG_DHR12RX_REGOFFSET_MASK | DAC_REG_DHR12LX_REGOFFSET_MASK | DAC_REG_DHR8RX_REGOFFSET_MASK) + +#define DAC_REG_DOR1_REGOFFSET ((uint32_t)0x00000000U) /* Register DORx channel 1 taken as reference */ +#define DAC_REG_DOR2_REGOFFSET ((uint32_t)0x10000000U)/* Register offset of DORx channel 1 versus DORx channel 2 (shifted left of 28 bits) */ +#define DAC_REG_DORX_REGOFFSET_MASK (DAC_REG_DOR1_REGOFFSET | DAC_REG_DOR2_REGOFFSET) + +/* DAC registers bits positions */ +#define DAC_DHR12RD_DACC2DHR_BITOFFSET_POS ((uint32_t)16U) /* Value equivalent to POSITION_VAL(DAC_DHR12RD_DACC2DHR) */ +#define DAC_DHR12LD_DACC2DHR_BITOFFSET_POS ((uint32_t)20U) /* Value equivalent to POSITION_VAL(DAC_DHR12LD_DACC2DHR) */ +#define DAC_DHR8RD_DACC2DHR_BITOFFSET_POS ((uint32_t) 8U) /* Value equivalent to POSITION_VAL(DAC_DHR8RD_DACC2DHR) */ + +/* Miscellaneous data */ +#define DAC_DIGITAL_SCALE_12BITS ((uint32_t)4095U) /* Full-scale digital value with a resolution of 12 bits (voltage range determined by analog voltage references Vref+ and Vref-, refer to reference manual) */ + +/** + * @} + */ + + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup DAC_LL_Private_Macros DAC Private Macros + * @{ + */ + +/** + * @brief Driver macro reserved for internal use: isolate bits with the + * selected mask and shift them to the register LSB + * (shift mask on register position bit 0). + * @param __BITS__ Bits in register 32 bits + * @param __MASK__ Mask in register 32 bits + * @retval Bits in register 32 bits +*/ +#define __DAC_MASK_SHIFT(__BITS__, __MASK__) \ + (((__BITS__) & (__MASK__)) >> POSITION_VAL((__MASK__))) + +/** + * @brief Driver macro reserved for internal use: set a pointer to + * a register from a register basis from which an offset + * is applied. + * @param __REG__ Register basis from which the offset is applied. + * @param __REG_OFFFSET__ Offset to be applied (unit: number of registers). + * @retval Pointer to register address +*/ +#define __DAC_PTR_REG_OFFSET(__REG__, __REG_OFFFSET__) \ + ((uint32_t *)((uint32_t) ((uint32_t)(&(__REG__)) + ((__REG_OFFFSET__) << 2U)))) + +/** + * @} + */ + + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup DAC_LL_ES_INIT DAC Exported Init structure + * @{ + */ + +/** + * @brief Structure definition of some features of DAC instance. + */ +typedef struct +{ + uint32_t TriggerSource; /*!< Set the conversion trigger source for the selected DAC channel: internal (SW start) or from external IP (timer event, external interrupt line). + This parameter can be a value of @ref DAC_LL_EC_TRIGGER_SOURCE + + This feature can be modified afterwards using unitary function @ref LL_DAC_SetTriggerSource(). */ + + uint32_t WaveAutoGeneration; /*!< Set the waveform automatic generation mode for the selected DAC channel. + This parameter can be a value of @ref DAC_LL_EC_WAVE_AUTO_GENERATION_MODE + + This feature can be modified afterwards using unitary function @ref LL_DAC_SetWaveAutoGeneration(). */ + + uint32_t WaveAutoGenerationConfig; /*!< Set the waveform automatic generation mode for the selected DAC channel. + If waveform automatic generation mode is set to noise, this parameter can be a value of @ref DAC_LL_EC_WAVE_NOISE_LFSR_UNMASK_BITS + If waveform automatic generation mode is set to triangle, this parameter can be a value of @ref DAC_LL_EC_WAVE_TRIANGLE_AMPLITUDE + @note If waveform automatic generation mode is disabled, this parameter is discarded. + + This feature can be modified afterwards using unitary function @ref LL_DAC_SetWaveNoiseLFSR() or @ref LL_DAC_SetWaveTriangleAmplitude(), depending on the wave automatic generation selected. */ + + uint32_t OutputBuffer; /*!< Set the output buffer for the selected DAC channel. + This parameter can be a value of @ref DAC_LL_EC_OUTPUT_BUFFER + + This feature can be modified afterwards using unitary function @ref LL_DAC_SetOutputBuffer(). */ + +} LL_DAC_InitTypeDef; + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup DAC_LL_Exported_Constants DAC Exported Constants + * @{ + */ + +/** @defgroup DAC_LL_EC_GET_FLAG DAC flags + * @brief Flags defines which can be used with LL_DAC_ReadReg function + * @{ + */ +/* DAC channel 1 flags */ +#define LL_DAC_FLAG_DMAUDR1 (DAC_SR_DMAUDR1) /*!< DAC channel 1 flag DMA underrun */ + +/* DAC channel 2 flags */ +#define LL_DAC_FLAG_DMAUDR2 (DAC_SR_DMAUDR2) /*!< DAC channel 2 flag DMA underrun */ +/** + * @} + */ + +/** @defgroup DAC_LL_EC_IT DAC interruptions + * @brief IT defines which can be used with LL_DAC_ReadReg and LL_DAC_WriteReg functions + * @{ + */ +#define LL_DAC_IT_DMAUDRIE1 (DAC_CR_DMAUDRIE1) /*!< DAC channel 1 interruption DMA underrun */ +#define LL_DAC_IT_DMAUDRIE2 (DAC_CR_DMAUDRIE2) /*!< DAC channel 2 interruption DMA underrun */ +/** + * @} + */ + +/** @defgroup DAC_LL_EC_CHANNEL DAC channels + * @{ + */ +#define LL_DAC_CHANNEL_1 (DAC_REG_DOR1_REGOFFSET | DAC_REG_DHR12R1_REGOFFSET | DAC_REG_DHR12L1_REGOFFSET | DAC_REG_DHR8R1_REGOFFSET | DAC_CR_CH1_BITOFFSET | DAC_SWTR_CH1) /*!< DAC channel 1 */ +#define LL_DAC_CHANNEL_2 (DAC_REG_DOR2_REGOFFSET | DAC_REG_DHR12R2_REGOFFSET | DAC_REG_DHR12L2_REGOFFSET | DAC_REG_DHR8R2_REGOFFSET | DAC_CR_CH2_BITOFFSET | DAC_SWTR_CH2) /*!< DAC channel 2 */ +/** + * @} + */ + +/** @defgroup DAC_LL_EC_TRIGGER_SOURCE DAC trigger source + * @{ + */ +#define LL_DAC_TRIG_SOFTWARE (DAC_CR_TSEL1_2 | DAC_CR_TSEL1_1 | DAC_CR_TSEL1_0) /*!< DAC channel conversion trigger internal (SW start) */ +#define LL_DAC_TRIG_EXT_TIM2_TRGO (DAC_CR_TSEL1_2 ) /*!< DAC channel conversion trigger from external IP: TIM2 TRGO. */ +#define LL_DAC_TRIG_EXT_TIM4_TRGO (DAC_CR_TSEL1_2 | DAC_CR_TSEL1_0) /*!< DAC channel conversion trigger from external IP: TIM4 TRGO. */ +#define LL_DAC_TRIG_EXT_TIM6_TRGO ((uint32_t)0x00000000U) /*!< DAC channel conversion trigger from external IP: TIM6 TRGO. */ +#define LL_DAC_TRIG_EXT_TIM7_TRGO ( DAC_CR_TSEL1_1 ) /*!< DAC channel conversion trigger from external IP: TIM7 TRGO. */ +#define LL_DAC_TRIG_EXT_TIM9_TRGO ( DAC_CR_TSEL1_1 | DAC_CR_TSEL1_0) /*!< DAC channel conversion trigger from external IP: TIM15 TRGO. */ +#define LL_DAC_TRIG_EXT_EXTI_LINE9 (DAC_CR_TSEL1_2 | DAC_CR_TSEL1_1 ) /*!< DAC channel conversion trigger from external IP: external interrupt line 9. */ +/** + * @} + */ + +/** @defgroup DAC_LL_EC_WAVE_AUTO_GENERATION_MODE DAC waveform automatic generation mode + * @{ + */ +#define LL_DAC_WAVE_AUTO_GENERATION_NONE ((uint32_t)0x00000000U) /*!< DAC channel wave auto generation mode disabled. */ +#define LL_DAC_WAVE_AUTO_GENERATION_NOISE (DAC_CR_WAVE1_0) /*!< DAC channel wave auto generation mode enabled, set generated noise waveform. */ +#define LL_DAC_WAVE_AUTO_GENERATION_TRIANGLE (DAC_CR_WAVE1_1) /*!< DAC channel wave auto generation mode enabled, set generated triangle waveform. */ +/** + * @} + */ + +/** @defgroup DAC_LL_EC_WAVE_NOISE_LFSR_UNMASK_BITS DAC wave generation - Noise LFSR unmask bits + * @{ + */ +#define LL_DAC_NOISE_LFSR_UNMASK_BIT0 ((uint32_t)0x00000000U) /*!< Noise wave generation, unmask LFSR bit0, for the selected DAC channel */ +#define LL_DAC_NOISE_LFSR_UNMASK_BITS1_0 ( DAC_CR_MAMP1_0) /*!< Noise wave generation, unmask LFSR bits[1:0], for the selected DAC channel */ +#define LL_DAC_NOISE_LFSR_UNMASK_BITS2_0 ( DAC_CR_MAMP1_1 ) /*!< Noise wave generation, unmask LFSR bits[2:0], for the selected DAC channel */ +#define LL_DAC_NOISE_LFSR_UNMASK_BITS3_0 ( DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Noise wave generation, unmask LFSR bits[3:0], for the selected DAC channel */ +#define LL_DAC_NOISE_LFSR_UNMASK_BITS4_0 ( DAC_CR_MAMP1_2 ) /*!< Noise wave generation, unmask LFSR bits[4:0], for the selected DAC channel */ +#define LL_DAC_NOISE_LFSR_UNMASK_BITS5_0 ( DAC_CR_MAMP1_2 | DAC_CR_MAMP1_0) /*!< Noise wave generation, unmask LFSR bits[5:0], for the selected DAC channel */ +#define LL_DAC_NOISE_LFSR_UNMASK_BITS6_0 ( DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1 ) /*!< Noise wave generation, unmask LFSR bits[6:0], for the selected DAC channel */ +#define LL_DAC_NOISE_LFSR_UNMASK_BITS7_0 ( DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Noise wave generation, unmask LFSR bits[7:0], for the selected DAC channel */ +#define LL_DAC_NOISE_LFSR_UNMASK_BITS8_0 (DAC_CR_MAMP1_3 ) /*!< Noise wave generation, unmask LFSR bits[8:0], for the selected DAC channel */ +#define LL_DAC_NOISE_LFSR_UNMASK_BITS9_0 (DAC_CR_MAMP1_3 | DAC_CR_MAMP1_0) /*!< Noise wave generation, unmask LFSR bits[9:0], for the selected DAC channel */ +#define LL_DAC_NOISE_LFSR_UNMASK_BITS10_0 (DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1 ) /*!< Noise wave generation, unmask LFSR bits[10:0], for the selected DAC channel */ +#define LL_DAC_NOISE_LFSR_UNMASK_BITS11_0 (DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Noise wave generation, unmask LFSR bits[11:0], for the selected DAC channel */ +/** + * @} + */ + +/** @defgroup DAC_LL_EC_WAVE_TRIANGLE_AMPLITUDE DAC wave generation - Triangle amplitude + * @{ + */ +#define LL_DAC_TRIANGLE_AMPLITUDE_1 ((uint32_t)0x00000000U) /*!< Triangle wave generation, amplitude of 1 LSB of DAC output range, for the selected DAC channel */ +#define LL_DAC_TRIANGLE_AMPLITUDE_3 ( DAC_CR_MAMP1_0) /*!< Triangle wave generation, amplitude of 3 LSB of DAC output range, for the selected DAC channel */ +#define LL_DAC_TRIANGLE_AMPLITUDE_7 ( DAC_CR_MAMP1_1 ) /*!< Triangle wave generation, amplitude of 7 LSB of DAC output range, for the selected DAC channel */ +#define LL_DAC_TRIANGLE_AMPLITUDE_15 ( DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Triangle wave generation, amplitude of 15 LSB of DAC output range, for the selected DAC channel */ +#define LL_DAC_TRIANGLE_AMPLITUDE_31 ( DAC_CR_MAMP1_2 ) /*!< Triangle wave generation, amplitude of 31 LSB of DAC output range, for the selected DAC channel */ +#define LL_DAC_TRIANGLE_AMPLITUDE_63 ( DAC_CR_MAMP1_2 | DAC_CR_MAMP1_0) /*!< Triangle wave generation, amplitude of 63 LSB of DAC output range, for the selected DAC channel */ +#define LL_DAC_TRIANGLE_AMPLITUDE_127 ( DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1 ) /*!< Triangle wave generation, amplitude of 127 LSB of DAC output range, for the selected DAC channel */ +#define LL_DAC_TRIANGLE_AMPLITUDE_255 ( DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Triangle wave generation, amplitude of 255 LSB of DAC output range, for the selected DAC channel */ +#define LL_DAC_TRIANGLE_AMPLITUDE_511 (DAC_CR_MAMP1_3 ) /*!< Triangle wave generation, amplitude of 512 LSB of DAC output range, for the selected DAC channel */ +#define LL_DAC_TRIANGLE_AMPLITUDE_1023 (DAC_CR_MAMP1_3 | DAC_CR_MAMP1_0) /*!< Triangle wave generation, amplitude of 1023 LSB of DAC output range, for the selected DAC channel */ +#define LL_DAC_TRIANGLE_AMPLITUDE_2047 (DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1 ) /*!< Triangle wave generation, amplitude of 2047 LSB of DAC output range, for the selected DAC channel */ +#define LL_DAC_TRIANGLE_AMPLITUDE_4095 (DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Triangle wave generation, amplitude of 4095 LSB of DAC output range, for the selected DAC channel */ +/** + * @} + */ + +/** @defgroup DAC_LL_EC_OUTPUT_BUFFER DAC channel output buffer + * @{ + */ +#define LL_DAC_OUTPUT_BUFFER_ENABLE ((uint32_t)0x00000000U) /*!< The selected DAC channel output is buffered: higher drive current capability, but also higher current consumption */ +#define LL_DAC_OUTPUT_BUFFER_DISABLE (DAC_CR_BOFF1) /*!< The selected DAC channel output is not buffered: lower drive current capability, but also lower current consumption */ +/** + * @} + */ + + +/** @defgroup DAC_LL_EC_RESOLUTION DAC channel output resolution + * @{ + */ +#define LL_DAC_RESOLUTION_12B ((uint32_t)0x00000000U) /*!< DAC channel resolution 12 bits */ +#define LL_DAC_RESOLUTION_8B ((uint32_t)0x00000002U) /*!< DAC channel resolution 8 bits */ +/** + * @} + */ + +/** @defgroup DAC_LL_EC_REGISTERS DAC registers compliant with specific purpose + * @{ + */ +/* List of DAC registers intended to be used (most commonly) with */ +/* DMA transfer. */ +/* Refer to function @ref LL_DAC_DMA_GetRegAddr(). */ +#define LL_DAC_DMA_REG_DATA_12BITS_RIGHT_ALIGNED DAC_REG_DHR12RX_REGOFFSET_MASK /*!< DAC channel data holding register 12 bits right aligned */ +#define LL_DAC_DMA_REG_DATA_12BITS_LEFT_ALIGNED DAC_REG_DHR12LX_REGOFFSET_MASK /*!< DAC channel data holding register 12 bits left aligned */ +#define LL_DAC_DMA_REG_DATA_8BITS_RIGHT_ALIGNED DAC_REG_DHR8RX_REGOFFSET_MASK /*!< DAC channel data holding register 8 bits right aligned */ +/** + * @} + */ + +/** @defgroup DAC_LL_EC_HW_DELAYS Definitions of DAC hardware constraints delays + * @note Only DAC IP HW delays are defined in DAC LL driver driver, + * not timeout values. + * For details on delays values, refer to descriptions in source code + * above each literal definition. + * @{ + */ + +/* Delay for DAC channel voltage settling time from DAC channel startup */ +/* (transition from disable to enable). */ +/* Note: DAC channel startup time depends on board application environment: */ +/* impedance connected to DAC channel output. */ +/* The delay below is specified under conditions: */ +/* - voltage maximum transition (lowest to highest value) */ +/* - until voltage reaches final value +-1LSB */ +/* - DAC channel output buffer enabled */ +/* - load impedance of 5kOhm (min), 50pF (max) */ +/* Literal set to maximum value (refer to device datasheet, */ +/* parameter "tWAKEUP"). */ +/* Unit: us */ +#define LL_DAC_DELAY_STARTUP_VOLTAGE_SETTLING_US ((uint32_t) 15U) /*!< Delay for DAC channel voltage settling time from DAC channel startup (transition from disable to enable) */ + +/* Delay for DAC channel voltage settling time. */ +/* Note: DAC channel startup time depends on board application environment: */ +/* impedance connected to DAC channel output. */ +/* The delay below is specified under conditions: */ +/* - voltage maximum transition (lowest to highest value) */ +/* - until voltage reaches final value +-1LSB */ +/* - DAC channel output buffer enabled */ +/* - load impedance of 5kOhm min, 50pF max */ +/* Literal set to maximum value (refer to device datasheet, */ +/* parameter "tSETTLING"). */ +/* Unit: us */ +#define LL_DAC_DELAY_VOLTAGE_SETTLING_US ((uint32_t) 12U) /*!< Delay for DAC channel voltage settling time */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup DAC_LL_Exported_Macros DAC Exported Macros + * @{ + */ + +/** @defgroup DAC_LL_EM_WRITE_READ Common write and read registers macros + * @{ + */ + +/** + * @brief Write a value in DAC register + * @param __INSTANCE__ DAC Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_DAC_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in DAC register + * @param __INSTANCE__ DAC Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_DAC_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) + +/** + * @} + */ + +/** @defgroup DAC_LL_EM_HELPER_MACRO DAC helper macro + * @{ + */ + +/** + * @brief Helper macro to get DAC channel number in decimal format + * from literals LL_DAC_CHANNEL_x. + * Example: + * __LL_DAC_CHANNEL_TO_DECIMAL_NB(LL_DAC_CHANNEL_1) + * will return decimal number "1". + * @note The input can be a value from functions where a channel + * number is returned. + * @param __CHANNEL__ This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 + * @retval 1...2 + */ +#define __LL_DAC_CHANNEL_TO_DECIMAL_NB(__CHANNEL__) \ + ((__CHANNEL__) & DAC_SWTR_CHX_MASK) + +/** + * @brief Helper macro to get DAC channel in literal format LL_DAC_CHANNEL_x + * from number in decimal format. + * Example: + * __LL_DAC_DECIMAL_NB_TO_CHANNEL(1) + * will return a data equivalent to "LL_DAC_CHANNEL_1". + * @note If the input parameter does not correspond to a DAC channel, + * this macro returns value '0'. + * @param __DECIMAL_NB__ 1...2 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 + */ +#define __LL_DAC_DECIMAL_NB_TO_CHANNEL(__DECIMAL_NB__) \ + (((__DECIMAL_NB__) == 1U) \ + ? ( \ + LL_DAC_CHANNEL_1 \ + ) \ + : \ + (((__DECIMAL_NB__) == 2U) \ + ? ( \ + LL_DAC_CHANNEL_2 \ + ) \ + : \ + ( \ + 0 \ + ) \ + ) \ + ) + +/** + * @brief Helper macro to define the DAC conversion data full-scale digital + * value corresponding to the selected DAC resolution. + * @note DAC conversion data full-scale corresponds to voltage range + * determined by analog voltage references Vref+ and Vref- + * (refer to reference manual). + * @param __DAC_RESOLUTION__ This parameter can be one of the following values: + * @arg @ref LL_DAC_RESOLUTION_12B + * @arg @ref LL_DAC_RESOLUTION_8B + * @retval ADC conversion data equivalent voltage value (unit: mVolt) + */ +#define __LL_DAC_DIGITAL_SCALE(__DAC_RESOLUTION__) \ + (((uint32_t)0xFFFU) >> ((__DAC_RESOLUTION__) << 1U)) + +/** + * @brief Helper macro to calculate the DAC conversion data (unit: digital + * value) corresponding to a voltage (unit: mVolt). + * @note This helper macro is intended to provide input data in voltage + * rather than digital value, + * to be used with LL DAC functions such as + * @ref LL_DAC_ConvertData12RightAligned(). + * @note Analog reference voltage (Vref+) must be either known from + * user board environment or can be calculated using ADC measurement + * and ADC helper macro @ref __LL_ADC_CALC_VREFANALOG_VOLTAGE(). + * @param __VREFANALOG_VOLTAGE__ Analog reference voltage (unit: mV) + * @param __DAC_VOLTAGE__ Voltage to be generated by DAC channel + * (unit: mVolt). + * @param __DAC_RESOLUTION__ This parameter can be one of the following values: + * @arg @ref LL_DAC_RESOLUTION_12B + * @arg @ref LL_DAC_RESOLUTION_8B + * @retval DAC conversion data (unit: digital value) + */ +#define __LL_DAC_CALC_VOLTAGE_TO_DATA(__VREFANALOG_VOLTAGE__,\ + __DAC_VOLTAGE__,\ + __DAC_RESOLUTION__) \ + ((__DAC_VOLTAGE__) * __LL_DAC_DIGITAL_SCALE(__DAC_RESOLUTION__) \ + / (__VREFANALOG_VOLTAGE__) \ + ) + +/** + * @} + */ + +/** + * @} + */ + + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup DAC_LL_Exported_Functions DAC Exported Functions + * @{ + */ +/** @defgroup DAC_LL_EF_Configuration Configuration of DAC channels + * @{ + */ + +/** + * @brief Set the conversion trigger source for the selected DAC channel. + * @note For conversion trigger source to be effective, DAC trigger + * must be enabled using function @ref LL_DAC_EnableTrigger(). + * @note To set conversion trigger source, DAC channel must be disabled. + * Otherwise, the setting is discarded. + * @note Availability of parameters of trigger sources from timer + * depends on timers availability on the selected device. + * @rmtoll CR TSEL1 LL_DAC_SetTriggerSource\n + * CR TSEL2 LL_DAC_SetTriggerSource + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 + * @param TriggerSource This parameter can be one of the following values: + * @arg @ref LL_DAC_TRIG_SOFTWARE + * @arg @ref LL_DAC_TRIG_EXT_TIM2_TRGO + * @arg @ref LL_DAC_TRIG_EXT_TIM4_TRGO + * @arg @ref LL_DAC_TRIG_EXT_TIM6_TRGO + * @arg @ref LL_DAC_TRIG_EXT_TIM7_TRGO + * @arg @ref LL_DAC_TRIG_EXT_TIM9_TRGO + * @arg @ref LL_DAC_TRIG_EXT_EXTI_LINE9 + * @retval None + */ +__STATIC_INLINE void LL_DAC_SetTriggerSource(DAC_TypeDef *DACx, uint32_t DAC_Channel, uint32_t TriggerSource) +{ + MODIFY_REG(DACx->CR, + DAC_CR_TSEL1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK), + TriggerSource << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)); +} + +/** + * @brief Get the conversion trigger source for the selected DAC channel. + * @note For conversion trigger source to be effective, DAC trigger + * must be enabled using function @ref LL_DAC_EnableTrigger(). + * @note Availability of parameters of trigger sources from timer + * depends on timers availability on the selected device. + * @rmtoll CR TSEL1 LL_DAC_GetTriggerSource\n + * CR TSEL2 LL_DAC_GetTriggerSource + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DAC_TRIG_SOFTWARE + * @arg @ref LL_DAC_TRIG_EXT_TIM2_TRGO + * @arg @ref LL_DAC_TRIG_EXT_TIM4_TRGO + * @arg @ref LL_DAC_TRIG_EXT_TIM6_TRGO + * @arg @ref LL_DAC_TRIG_EXT_TIM7_TRGO + * @arg @ref LL_DAC_TRIG_EXT_TIM9_TRGO + * @arg @ref LL_DAC_TRIG_EXT_EXTI_LINE9 + */ +__STATIC_INLINE uint32_t LL_DAC_GetTriggerSource(DAC_TypeDef *DACx, uint32_t DAC_Channel) +{ + return (uint32_t)(READ_BIT(DACx->CR, DAC_CR_TSEL1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)) + >> (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK) + ); +} + +/** + * @brief Set the waveform automatic generation mode + * for the selected DAC channel. + * @rmtoll CR WAVE1 LL_DAC_SetWaveAutoGeneration\n + * CR WAVE2 LL_DAC_SetWaveAutoGeneration + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 + * @param WaveAutoGeneration This parameter can be one of the following values: + * @arg @ref LL_DAC_WAVE_AUTO_GENERATION_NONE + * @arg @ref LL_DAC_WAVE_AUTO_GENERATION_NOISE + * @arg @ref LL_DAC_WAVE_AUTO_GENERATION_TRIANGLE + * @retval None + */ +__STATIC_INLINE void LL_DAC_SetWaveAutoGeneration(DAC_TypeDef *DACx, uint32_t DAC_Channel, uint32_t WaveAutoGeneration) +{ + MODIFY_REG(DACx->CR, + DAC_CR_WAVE1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK), + WaveAutoGeneration << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)); +} + +/** + * @brief Get the waveform automatic generation mode + * for the selected DAC channel. + * @rmtoll CR WAVE1 LL_DAC_GetWaveAutoGeneration\n + * CR WAVE2 LL_DAC_GetWaveAutoGeneration + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DAC_WAVE_AUTO_GENERATION_NONE + * @arg @ref LL_DAC_WAVE_AUTO_GENERATION_NOISE + * @arg @ref LL_DAC_WAVE_AUTO_GENERATION_TRIANGLE + */ +__STATIC_INLINE uint32_t LL_DAC_GetWaveAutoGeneration(DAC_TypeDef *DACx, uint32_t DAC_Channel) +{ + return (uint32_t)(READ_BIT(DACx->CR, DAC_CR_WAVE1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)) + >> (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK) + ); +} + +/** + * @brief Set the noise waveform generation for the selected DAC channel: + * Noise mode and parameters LFSR (linear feedback shift register). + * @note For wave generation to be effective, DAC channel + * wave generation mode must be enabled using + * function @ref LL_DAC_SetWaveAutoGeneration(). + * @note This setting can be set when the selected DAC channel is disabled + * (otherwise, the setting operation is ignored). + * @rmtoll CR MAMP1 LL_DAC_SetWaveNoiseLFSR\n + * CR MAMP2 LL_DAC_SetWaveNoiseLFSR + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 + * @param NoiseLFSRMask This parameter can be one of the following values: + * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BIT0 + * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS1_0 + * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS2_0 + * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS3_0 + * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS4_0 + * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS5_0 + * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS6_0 + * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS7_0 + * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS8_0 + * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS9_0 + * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS10_0 + * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS11_0 + * @retval None + */ +__STATIC_INLINE void LL_DAC_SetWaveNoiseLFSR(DAC_TypeDef *DACx, uint32_t DAC_Channel, uint32_t NoiseLFSRMask) +{ + MODIFY_REG(DACx->CR, + DAC_CR_MAMP1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK), + NoiseLFSRMask << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)); +} + +/** + * @brief Set the noise waveform generation for the selected DAC channel: + * Noise mode and parameters LFSR (linear feedback shift register). + * @rmtoll CR MAMP1 LL_DAC_GetWaveNoiseLFSR\n + * CR MAMP2 LL_DAC_GetWaveNoiseLFSR + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BIT0 + * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS1_0 + * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS2_0 + * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS3_0 + * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS4_0 + * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS5_0 + * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS6_0 + * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS7_0 + * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS8_0 + * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS9_0 + * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS10_0 + * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS11_0 + */ +__STATIC_INLINE uint32_t LL_DAC_GetWaveNoiseLFSR(DAC_TypeDef *DACx, uint32_t DAC_Channel) +{ + return (uint32_t)(READ_BIT(DACx->CR, DAC_CR_MAMP1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)) + >> (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK) + ); +} + +/** + * @brief Set the triangle waveform generation for the selected DAC channel: + * triangle mode and amplitude. + * @note For wave generation to be effective, DAC channel + * wave generation mode must be enabled using + * function @ref LL_DAC_SetWaveAutoGeneration(). + * @note This setting can be set when the selected DAC channel is disabled + * (otherwise, the setting operation is ignored). + * @rmtoll CR MAMP1 LL_DAC_SetWaveTriangleAmplitude\n + * CR MAMP2 LL_DAC_SetWaveTriangleAmplitude + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 + * @param TriangleAmplitude This parameter can be one of the following values: + * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_1 + * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_3 + * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_7 + * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_15 + * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_31 + * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_63 + * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_127 + * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_255 + * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_511 + * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_1023 + * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_2047 + * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_4095 + * @retval None + */ +__STATIC_INLINE void LL_DAC_SetWaveTriangleAmplitude(DAC_TypeDef *DACx, uint32_t DAC_Channel, uint32_t TriangleAmplitude) +{ + MODIFY_REG(DACx->CR, + DAC_CR_MAMP1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK), + TriangleAmplitude << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)); +} + +/** + * @brief Set the triangle waveform generation for the selected DAC channel: + * triangle mode and amplitude. + * @rmtoll CR MAMP1 LL_DAC_GetWaveTriangleAmplitude\n + * CR MAMP2 LL_DAC_GetWaveTriangleAmplitude + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_1 + * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_3 + * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_7 + * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_15 + * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_31 + * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_63 + * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_127 + * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_255 + * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_511 + * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_1023 + * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_2047 + * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_4095 + */ +__STATIC_INLINE uint32_t LL_DAC_GetWaveTriangleAmplitude(DAC_TypeDef *DACx, uint32_t DAC_Channel) +{ + return (uint32_t)(READ_BIT(DACx->CR, DAC_CR_MAMP1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)) + >> (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK) + ); +} + +/** + * @brief Set the output buffer for the selected DAC channel. + * @rmtoll CR BOFF1 LL_DAC_SetOutputBuffer\n + * CR BOFF2 LL_DAC_SetOutputBuffer + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 + * @param OutputBuffer This parameter can be one of the following values: + * @arg @ref LL_DAC_OUTPUT_BUFFER_ENABLE + * @arg @ref LL_DAC_OUTPUT_BUFFER_DISABLE + * @retval None + */ +__STATIC_INLINE void LL_DAC_SetOutputBuffer(DAC_TypeDef *DACx, uint32_t DAC_Channel, uint32_t OutputBuffer) +{ + MODIFY_REG(DACx->CR, + DAC_CR_BOFF1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK), + OutputBuffer << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)); +} + +/** + * @brief Get the output buffer state for the selected DAC channel. + * @rmtoll CR BOFF1 LL_DAC_GetOutputBuffer\n + * CR BOFF2 LL_DAC_GetOutputBuffer + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DAC_OUTPUT_BUFFER_ENABLE + * @arg @ref LL_DAC_OUTPUT_BUFFER_DISABLE + */ +__STATIC_INLINE uint32_t LL_DAC_GetOutputBuffer(DAC_TypeDef *DACx, uint32_t DAC_Channel) +{ + return (uint32_t)(READ_BIT(DACx->CR, DAC_CR_BOFF1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)) + >> (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK) + ); +} + +/** + * @} + */ + +/** @defgroup DAC_LL_EF_DMA_Management DMA Management + * @{ + */ + +/** + * @brief Enable DAC DMA transfer request of the selected channel. + * @note To configure DMA source address (peripheral address), + * use function @ref LL_DAC_DMA_GetRegAddr(). + * @rmtoll CR DMAEN1 LL_DAC_EnableDMAReq\n + * CR DMAEN2 LL_DAC_EnableDMAReq + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 + * @retval None + */ +__STATIC_INLINE void LL_DAC_EnableDMAReq(DAC_TypeDef *DACx, uint32_t DAC_Channel) +{ + SET_BIT(DACx->CR, + DAC_CR_DMAEN1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)); +} + +/** + * @brief Disable DAC DMA transfer request of the selected channel. + * @note To configure DMA source address (peripheral address), + * use function @ref LL_DAC_DMA_GetRegAddr(). + * @rmtoll CR DMAEN1 LL_DAC_DisableDMAReq\n + * CR DMAEN2 LL_DAC_DisableDMAReq + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 + * @retval None + */ +__STATIC_INLINE void LL_DAC_DisableDMAReq(DAC_TypeDef *DACx, uint32_t DAC_Channel) +{ + CLEAR_BIT(DACx->CR, + DAC_CR_DMAEN1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)); +} + +/** + * @brief Get DAC DMA transfer request state of the selected channel. + * (0: DAC DMA transfer request is disabled, 1: DAC DMA transfer request is enabled) + * @rmtoll CR DMAEN1 LL_DAC_IsDMAReqEnabled\n + * CR DMAEN2 LL_DAC_IsDMAReqEnabled + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DAC_IsDMAReqEnabled(DAC_TypeDef *DACx, uint32_t DAC_Channel) +{ + return (READ_BIT(DACx->CR, + DAC_CR_DMAEN1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)) + == (DAC_CR_DMAEN1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK))); +} + +/** + * @brief Function to help to configure DMA transfer to DAC: retrieve the + * DAC register address from DAC instance and a list of DAC registers + * intended to be used (most commonly) with DMA transfer. + * @note These DAC registers are data holding registers: + * when DAC conversion is requested, DAC generates a DMA transfer + * request to have data available in DAC data holding registers. + * @note This macro is intended to be used with LL DMA driver, refer to + * function "LL_DMA_ConfigAddresses()". + * Example: + * LL_DMA_ConfigAddresses(DMA1, + * LL_DMA_CHANNEL_1, + * (uint32_t)&< array or variable >, + * LL_DAC_DMA_GetRegAddr(DAC1, LL_DAC_CHANNEL_1, LL_DAC_DMA_REG_DATA_12BITS_RIGHT_ALIGNED), + * LL_DMA_DIRECTION_MEMORY_TO_PERIPH); + * @rmtoll DHR12R1 DACC1DHR LL_DAC_DMA_GetRegAddr\n + * DHR12L1 DACC1DHR LL_DAC_DMA_GetRegAddr\n + * DHR8R1 DACC1DHR LL_DAC_DMA_GetRegAddr\n + * DHR12R2 DACC2DHR LL_DAC_DMA_GetRegAddr\n + * DHR12L2 DACC2DHR LL_DAC_DMA_GetRegAddr\n + * DHR8R2 DACC2DHR LL_DAC_DMA_GetRegAddr + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 + * @param Register This parameter can be one of the following values: + * @arg @ref LL_DAC_DMA_REG_DATA_12BITS_RIGHT_ALIGNED + * @arg @ref LL_DAC_DMA_REG_DATA_12BITS_LEFT_ALIGNED + * @arg @ref LL_DAC_DMA_REG_DATA_8BITS_RIGHT_ALIGNED + * @retval DAC register address + */ +__STATIC_INLINE uint32_t LL_DAC_DMA_GetRegAddr(DAC_TypeDef *DACx, uint32_t DAC_Channel, uint32_t Register) +{ + /* Retrieve address of register DHR12Rx, DHR12Lx or DHR8Rx depending on */ + /* DAC channel selected. */ + return ((uint32_t)(__DAC_PTR_REG_OFFSET((DACx)->DHR12R1, __DAC_MASK_SHIFT(DAC_Channel, Register)))); +} +/** + * @} + */ + +/** @defgroup DAC_LL_EF_Operation Operation on DAC channels + * @{ + */ + +/** + * @brief Enable DAC selected channel. + * @rmtoll CR EN1 LL_DAC_Enable\n + * CR EN2 LL_DAC_Enable + * @note After enable from off state, DAC channel requires a delay + * for output voltage to reach accuracy +/- 1 LSB. + * Refer to device datasheet, parameter "tWAKEUP". + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 + * @retval None + */ +__STATIC_INLINE void LL_DAC_Enable(DAC_TypeDef *DACx, uint32_t DAC_Channel) +{ + SET_BIT(DACx->CR, + DAC_CR_EN1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)); +} + +/** + * @brief Disable DAC selected channel. + * @rmtoll CR EN1 LL_DAC_Disable\n + * CR EN2 LL_DAC_Disable + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 + * @retval None + */ +__STATIC_INLINE void LL_DAC_Disable(DAC_TypeDef *DACx, uint32_t DAC_Channel) +{ + CLEAR_BIT(DACx->CR, + DAC_CR_EN1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)); +} + +/** + * @brief Get DAC enable state of the selected channel. + * (0: DAC channel is disabled, 1: DAC channel is enabled) + * @rmtoll CR EN1 LL_DAC_IsEnabled\n + * CR EN2 LL_DAC_IsEnabled + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DAC_IsEnabled(DAC_TypeDef *DACx, uint32_t DAC_Channel) +{ + return (READ_BIT(DACx->CR, + DAC_CR_EN1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)) + == (DAC_CR_EN1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK))); +} + +/** + * @brief Enable DAC trigger of the selected channel. + * @note - If DAC trigger is disabled, DAC conversion is performed + * automatically once the data holding register is updated, + * using functions "LL_DAC_ConvertData{8; 12}{Right; Left} Aligned()": + * @ref LL_DAC_ConvertData12RightAligned(), ... + * - If DAC trigger is enabled, DAC conversion is performed + * only when a hardware of software trigger event is occurring. + * Select trigger source using + * function @ref LL_DAC_SetTriggerSource(). + * @rmtoll CR TEN1 LL_DAC_EnableTrigger\n + * CR TEN2 LL_DAC_EnableTrigger + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 + * @retval None + */ +__STATIC_INLINE void LL_DAC_EnableTrigger(DAC_TypeDef *DACx, uint32_t DAC_Channel) +{ + SET_BIT(DACx->CR, + DAC_CR_TEN1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)); +} + +/** + * @brief Disable DAC trigger of the selected channel. + * @rmtoll CR TEN1 LL_DAC_DisableTrigger\n + * CR TEN2 LL_DAC_DisableTrigger + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 + * @retval None + */ +__STATIC_INLINE void LL_DAC_DisableTrigger(DAC_TypeDef *DACx, uint32_t DAC_Channel) +{ + CLEAR_BIT(DACx->CR, + DAC_CR_TEN1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)); +} + +/** + * @brief Get DAC trigger state of the selected channel. + * (0: DAC trigger is disabled, 1: DAC trigger is enabled) + * @rmtoll CR TEN1 LL_DAC_IsTriggerEnabled\n + * CR TEN2 LL_DAC_IsTriggerEnabled + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DAC_IsTriggerEnabled(DAC_TypeDef *DACx, uint32_t DAC_Channel) +{ + return (READ_BIT(DACx->CR, + DAC_CR_TEN1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)) + == (DAC_CR_TEN1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK))); +} + +/** + * @brief Trig DAC conversion by software for the selected DAC channel. + * @note Preliminarily, DAC trigger must be set to software trigger + * using function @ref LL_DAC_SetTriggerSource() + * with parameter "LL_DAC_TRIGGER_SOFTWARE". + * and DAC trigger must be enabled using + * function @ref LL_DAC_EnableTrigger(). + * @note For devices featuring DAC with 2 channels: this function + * can perform a SW start of both DAC channels simultaneously. + * Two channels can be selected as parameter. + * Example: (LL_DAC_CHANNEL_1 | LL_DAC_CHANNEL_2) + * @rmtoll SWTRIGR SWTRIG1 LL_DAC_TrigSWConversion\n + * SWTRIGR SWTRIG2 LL_DAC_TrigSWConversion + * @param DACx DAC instance + * @param DAC_Channel This parameter can a combination of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 + * @retval None + */ +__STATIC_INLINE void LL_DAC_TrigSWConversion(DAC_TypeDef *DACx, uint32_t DAC_Channel) +{ + SET_BIT(DACx->SWTRIGR, + (DAC_Channel & DAC_SWTR_CHX_MASK)); +} + +/** + * @brief Set the data to be loaded in the data holding register + * in format 12 bits left alignment (LSB aligned on bit 0), + * for the selected DAC channel. + * @rmtoll DHR12R1 DACC1DHR LL_DAC_ConvertData12RightAligned\n + * DHR12R2 DACC2DHR LL_DAC_ConvertData12RightAligned + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 + * @param Data Value between Min_Data=0x000 and Max_Data=0xFFF + * @retval None + */ +__STATIC_INLINE void LL_DAC_ConvertData12RightAligned(DAC_TypeDef *DACx, uint32_t DAC_Channel, uint32_t Data) +{ + register uint32_t *preg = __DAC_PTR_REG_OFFSET(DACx->DHR12R1, __DAC_MASK_SHIFT(DAC_Channel, DAC_REG_DHR12RX_REGOFFSET_MASK)); + + MODIFY_REG(*preg, + DAC_DHR12R1_DACC1DHR, + Data); +} + +/** + * @brief Set the data to be loaded in the data holding register + * in format 12 bits left alignment (MSB aligned on bit 15), + * for the selected DAC channel. + * @rmtoll DHR12L1 DACC1DHR LL_DAC_ConvertData12LeftAligned\n + * DHR12L2 DACC2DHR LL_DAC_ConvertData12LeftAligned + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 + * @param Data Value between Min_Data=0x000 and Max_Data=0xFFF + * @retval None + */ +__STATIC_INLINE void LL_DAC_ConvertData12LeftAligned(DAC_TypeDef *DACx, uint32_t DAC_Channel, uint32_t Data) +{ + register uint32_t *preg = __DAC_PTR_REG_OFFSET(DACx->DHR12R1, __DAC_MASK_SHIFT(DAC_Channel, DAC_REG_DHR12LX_REGOFFSET_MASK)); + + MODIFY_REG(*preg, + DAC_DHR12L1_DACC1DHR, + Data); +} + +/** + * @brief Set the data to be loaded in the data holding register + * in format 8 bits left alignment (LSB aligned on bit 0), + * for the selected DAC channel. + * @rmtoll DHR8R1 DACC1DHR LL_DAC_ConvertData8RightAligned\n + * DHR8R2 DACC2DHR LL_DAC_ConvertData8RightAligned + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 + * @param Data Value between Min_Data=0x00 and Max_Data=0xFF + * @retval None + */ +__STATIC_INLINE void LL_DAC_ConvertData8RightAligned(DAC_TypeDef *DACx, uint32_t DAC_Channel, uint32_t Data) +{ + register uint32_t *preg = __DAC_PTR_REG_OFFSET(DACx->DHR12R1, __DAC_MASK_SHIFT(DAC_Channel, DAC_REG_DHR8RX_REGOFFSET_MASK)); + + MODIFY_REG(*preg, + DAC_DHR8R1_DACC1DHR, + Data); +} + +/** + * @brief Set the data to be loaded in the data holding register + * in format 12 bits left alignment (LSB aligned on bit 0), + * for both DAC channels. + * @rmtoll DHR12RD DACC1DHR LL_DAC_ConvertDualData12RightAligned\n + * DHR12RD DACC2DHR LL_DAC_ConvertDualData12RightAligned + * @param DACx DAC instance + * @param DataChannel1 Value between Min_Data=0x000 and Max_Data=0xFFF + * @param DataChannel2 Value between Min_Data=0x000 and Max_Data=0xFFF + * @retval None + */ +__STATIC_INLINE void LL_DAC_ConvertDualData12RightAligned(DAC_TypeDef *DACx, uint32_t DataChannel1, uint32_t DataChannel2) +{ + MODIFY_REG(DACx->DHR12RD, + (DAC_DHR12RD_DACC2DHR | DAC_DHR12RD_DACC1DHR), + ((DataChannel2 << DAC_DHR12RD_DACC2DHR_BITOFFSET_POS) | DataChannel1)); +} + +/** + * @brief Set the data to be loaded in the data holding register + * in format 12 bits left alignment (MSB aligned on bit 15), + * for both DAC channels. + * @rmtoll DHR12LD DACC1DHR LL_DAC_ConvertDualData12LeftAligned\n + * DHR12LD DACC2DHR LL_DAC_ConvertDualData12LeftAligned + * @param DACx DAC instance + * @param DataChannel1 Value between Min_Data=0x000 and Max_Data=0xFFF + * @param DataChannel2 Value between Min_Data=0x000 and Max_Data=0xFFF + * @retval None + */ +__STATIC_INLINE void LL_DAC_ConvertDualData12LeftAligned(DAC_TypeDef *DACx, uint32_t DataChannel1, uint32_t DataChannel2) +{ + /* Note: Data of DAC channel 2 shift value subtracted of 4 because */ + /* data on 16 bits and DAC channel 2 bits field is on the 12 MSB, */ + /* the 4 LSB must be taken into account for the shift value. */ + MODIFY_REG(DACx->DHR12LD, + (DAC_DHR12LD_DACC2DHR | DAC_DHR12LD_DACC1DHR), + ((DataChannel2 << (DAC_DHR12LD_DACC2DHR_BITOFFSET_POS - 4U)) | DataChannel1)); +} + +/** + * @brief Set the data to be loaded in the data holding register + * in format 8 bits left alignment (LSB aligned on bit 0), + * for both DAC channels. + * @rmtoll DHR8RD DACC1DHR LL_DAC_ConvertDualData8RightAligned\n + * DHR8RD DACC2DHR LL_DAC_ConvertDualData8RightAligned + * @param DACx DAC instance + * @param DataChannel1 Value between Min_Data=0x00 and Max_Data=0xFF + * @param DataChannel2 Value between Min_Data=0x00 and Max_Data=0xFF + * @retval None + */ +__STATIC_INLINE void LL_DAC_ConvertDualData8RightAligned(DAC_TypeDef *DACx, uint32_t DataChannel1, uint32_t DataChannel2) +{ + MODIFY_REG(DACx->DHR8RD, + (DAC_DHR8RD_DACC2DHR | DAC_DHR8RD_DACC1DHR), + ((DataChannel2 << DAC_DHR8RD_DACC2DHR_BITOFFSET_POS) | DataChannel1)); +} + +/** + * @brief Retrieve output data currently generated for the selected DAC channel. + * @note Whatever alignment and resolution settings + * (using functions "LL_DAC_ConvertData{8; 12}{Right; Left} Aligned()": + * @ref LL_DAC_ConvertData12RightAligned(), ...), + * output data format is 12 bits right aligned (LSB aligned on bit 0). + * @rmtoll DOR1 DACC1DOR LL_DAC_RetrieveOutputData\n + * DOR2 DACC2DOR LL_DAC_RetrieveOutputData + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 + * @retval Value between Min_Data=0x000 and Max_Data=0xFFF + */ +__STATIC_INLINE uint32_t LL_DAC_RetrieveOutputData(DAC_TypeDef *DACx, uint32_t DAC_Channel) +{ + register uint32_t *preg = __DAC_PTR_REG_OFFSET(DACx->DOR1, __DAC_MASK_SHIFT(DAC_Channel, DAC_REG_DORX_REGOFFSET_MASK)); + + return (uint16_t) READ_BIT(*preg, DAC_DOR1_DACC1DOR); +} + +/** + * @} + */ + +/** @defgroup DAC_LL_EF_FLAG_Management FLAG Management + * @{ + */ +/** + * @brief Get DAC underrun flag for DAC channel 1 + * @rmtoll SR DMAUDR1 LL_DAC_IsActiveFlag_DMAUDR1 + * @param DACx DAC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DAC_IsActiveFlag_DMAUDR1(DAC_TypeDef *DACx) +{ + return (READ_BIT(DACx->SR, LL_DAC_FLAG_DMAUDR1) == (LL_DAC_FLAG_DMAUDR1)); +} + +/** + * @brief Get DAC underrun flag for DAC channel 2 + * @rmtoll SR DMAUDR2 LL_DAC_IsActiveFlag_DMAUDR2 + * @param DACx DAC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DAC_IsActiveFlag_DMAUDR2(DAC_TypeDef *DACx) +{ + return (READ_BIT(DACx->SR, LL_DAC_FLAG_DMAUDR2) == (LL_DAC_FLAG_DMAUDR2)); +} + +/** + * @brief Clear DAC underrun flag for DAC channel 1 + * @rmtoll SR DMAUDR1 LL_DAC_ClearFlag_DMAUDR1 + * @param DACx DAC instance + * @retval None + */ +__STATIC_INLINE void LL_DAC_ClearFlag_DMAUDR1(DAC_TypeDef *DACx) +{ + WRITE_REG(DACx->SR, LL_DAC_FLAG_DMAUDR1); +} + +/** + * @brief Clear DAC underrun flag for DAC channel 2 + * @rmtoll SR DMAUDR2 LL_DAC_ClearFlag_DMAUDR2 + * @param DACx DAC instance + * @retval None + */ +__STATIC_INLINE void LL_DAC_ClearFlag_DMAUDR2(DAC_TypeDef *DACx) +{ + WRITE_REG(DACx->SR, LL_DAC_FLAG_DMAUDR2); +} + +/** + * @} + */ + +/** @defgroup DAC_LL_EF_IT_Management IT management + * @{ + */ + +/** + * @brief Enable DMA underrun interrupt for DAC channel 1 + * @rmtoll CR DMAUDRIE1 LL_DAC_EnableIT_DMAUDR1 + * @param DACx DAC instance + * @retval None + */ +__STATIC_INLINE void LL_DAC_EnableIT_DMAUDR1(DAC_TypeDef *DACx) +{ + SET_BIT(DACx->CR, LL_DAC_IT_DMAUDRIE1); +} + +/** + * @brief Enable DMA underrun interrupt for DAC channel 2 + * @rmtoll CR DMAUDRIE2 LL_DAC_EnableIT_DMAUDR2 + * @param DACx DAC instance + * @retval None + */ +__STATIC_INLINE void LL_DAC_EnableIT_DMAUDR2(DAC_TypeDef *DACx) +{ + SET_BIT(DACx->CR, LL_DAC_IT_DMAUDRIE2); +} + +/** + * @brief Disable DMA underrun interrupt for DAC channel 1 + * @rmtoll CR DMAUDRIE1 LL_DAC_DisableIT_DMAUDR1 + * @param DACx DAC instance + * @retval None + */ +__STATIC_INLINE void LL_DAC_DisableIT_DMAUDR1(DAC_TypeDef *DACx) +{ + CLEAR_BIT(DACx->CR, LL_DAC_IT_DMAUDRIE1); +} + +/** + * @brief Disable DMA underrun interrupt for DAC channel 2 + * @rmtoll CR DMAUDRIE2 LL_DAC_DisableIT_DMAUDR2 + * @param DACx DAC instance + * @retval None + */ +__STATIC_INLINE void LL_DAC_DisableIT_DMAUDR2(DAC_TypeDef *DACx) +{ + CLEAR_BIT(DACx->CR, LL_DAC_IT_DMAUDRIE2); +} + +/** + * @brief Get DMA underrun interrupt for DAC channel 1 + * @rmtoll CR DMAUDRIE1 LL_DAC_IsEnabledIT_DMAUDR1 + * @param DACx DAC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DAC_IsEnabledIT_DMAUDR1(DAC_TypeDef *DACx) +{ + return (READ_BIT(DACx->CR, LL_DAC_IT_DMAUDRIE1) == (LL_DAC_IT_DMAUDRIE1)); +} + +/** + * @brief Get DMA underrun interrupt for DAC channel 2 + * @rmtoll CR DMAUDRIE2 LL_DAC_IsEnabledIT_DMAUDR2 + * @param DACx DAC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DAC_IsEnabledIT_DMAUDR2(DAC_TypeDef *DACx) +{ + return (READ_BIT(DACx->CR, LL_DAC_IT_DMAUDRIE2) == (LL_DAC_IT_DMAUDRIE2)); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup DAC_LL_EF_Init Initialization and de-initialization functions + * @{ + */ + +ErrorStatus LL_DAC_DeInit(DAC_TypeDef* DACx); +ErrorStatus LL_DAC_Init(DAC_TypeDef* DACx, uint32_t DAC_Channel, LL_DAC_InitTypeDef* DAC_InitStruct); +void LL_DAC_StructInit(LL_DAC_InitTypeDef* DAC_InitStruct); + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* DAC1 */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32L1xx_LL_DAC_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_ll_dma.h b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_ll_dma.h new file mode 100755 index 0000000..1c01672 --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_ll_dma.h @@ -0,0 +1,2033 @@ +/** + ****************************************************************************** + * @file stm32l1xx_ll_dma.h + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief Header file of DMA LL module. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L1xx_LL_DMA_H +#define __STM32L1xx_LL_DMA_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx.h" + +/** @addtogroup STM32L1xx_LL_Driver + * @{ + */ + +#if defined (DMA1) || defined (DMA2) + +/** @defgroup DMA_LL DMA + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/** @defgroup DMA_LL_Private_Variables DMA Private Variables + * @{ + */ +/* Array used to get the DMA channel register offset versus channel index LL_DMA_CHANNEL_x */ +static const uint8_t CHANNEL_OFFSET_TAB[] = +{ + (uint8_t)(DMA1_Channel1_BASE - DMA1_BASE), + (uint8_t)(DMA1_Channel2_BASE - DMA1_BASE), + (uint8_t)(DMA1_Channel3_BASE - DMA1_BASE), + (uint8_t)(DMA1_Channel4_BASE - DMA1_BASE), + (uint8_t)(DMA1_Channel5_BASE - DMA1_BASE), + (uint8_t)(DMA1_Channel6_BASE - DMA1_BASE), + (uint8_t)(DMA1_Channel7_BASE - DMA1_BASE) +}; +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup DMA_LL_Private_Constants DMA Private Constants + * @{ + */ +/* Define used to get CSELR register offset */ +#define DMA_CSELR_OFFSET (uint32_t)(DMA1_CSELR_BASE - DMA1_BASE) + +/* Defines used for the bit position in the register and perform offsets */ +#define DMA_POSITION_CSELR_CXS POSITION_VAL(DMA_CSELR_C1S << ((Channel-1U)*4U)) +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup DMA_LL_Private_Macros DMA Private Macros + * @{ + */ +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup DMA_LL_ES_INIT DMA Exported Init structure + * @{ + */ +typedef struct +{ + uint32_t PeriphOrM2MSrcAddress; /*!< Specifies the peripheral base address for DMA transfer + or as Source base address in case of memory to memory transfer direction. + + This parameter must be a value between Min_Data = 0 and Max_Data = 0xFFFFFFFF. */ + + uint32_t MemoryOrM2MDstAddress; /*!< Specifies the memory base address for DMA transfer + or as Destination base address in case of memory to memory transfer direction. + + This parameter must be a value between Min_Data = 0 and Max_Data = 0xFFFFFFFF. */ + + uint32_t Direction; /*!< Specifies if the data will be transferred from memory to peripheral, + from memory to memory or from peripheral to memory. + This parameter can be a value of @ref DMA_LL_EC_DIRECTION + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetDataTransferDirection(). */ + + uint32_t Mode; /*!< Specifies the normal or circular operation mode. + This parameter can be a value of @ref DMA_LL_EC_MODE + @note: The circular buffer mode cannot be used if the memory to memory + data transfer direction is configured on the selected Channel + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetMode(). */ + + uint32_t PeriphOrM2MSrcIncMode; /*!< Specifies whether the Peripheral address or Source address in case of memory to memory transfer direction + is incremented or not. + This parameter can be a value of @ref DMA_LL_EC_PERIPH + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetPeriphIncMode(). */ + + uint32_t MemoryOrM2MDstIncMode; /*!< Specifies whether the Memory address or Destination address in case of memory to memory transfer direction + is incremented or not. + This parameter can be a value of @ref DMA_LL_EC_MEMORY + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetMemoryIncMode(). */ + + uint32_t PeriphOrM2MSrcDataSize; /*!< Specifies the Peripheral data size alignment or Source data size alignment (byte, half word, word) + in case of memory to memory transfer direction. + This parameter can be a value of @ref DMA_LL_EC_PDATAALIGN + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetPeriphSize(). */ + + uint32_t MemoryOrM2MDstDataSize; /*!< Specifies the Memory data size alignment or Destination data size alignment (byte, half word, word) + in case of memory to memory transfer direction. + This parameter can be a value of @ref DMA_LL_EC_MDATAALIGN + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetMemorySize(). */ + + uint32_t NbData; /*!< Specifies the number of data to transfer, in data unit. + The data unit is equal to the source buffer configuration set in PeripheralSize + or MemorySize parameters depending in the transfer direction. + This parameter must be a value between Min_Data = 0 and Max_Data = 0x0000FFFF + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetDataLength(). */ + + uint32_t Priority; /*!< Specifies the channel priority level. + This parameter can be a value of @ref DMA_LL_EC_PRIORITY + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetChannelPriorityLevel(). */ + +} LL_DMA_InitTypeDef; +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup DMA_LL_Exported_Constants DMA Exported Constants + * @{ + */ +/** @defgroup DMA_LL_EC_CLEAR_FLAG Clear Flags Defines + * @brief Flags defines which can be used with LL_DMA_WriteReg function + * @{ + */ +#define LL_DMA_IFCR_CGIF1 DMA_IFCR_CGIF1 /*!< Channel 1 global flag */ +#define LL_DMA_IFCR_CTCIF1 DMA_IFCR_CTCIF1 /*!< Channel 1 transfer complete flag */ +#define LL_DMA_IFCR_CHTIF1 DMA_IFCR_CHTIF1 /*!< Channel 1 half transfer flag */ +#define LL_DMA_IFCR_CTEIF1 DMA_IFCR_CTEIF1 /*!< Channel 1 transfer error flag */ +#define LL_DMA_IFCR_CGIF2 DMA_IFCR_CGIF2 /*!< Channel 2 global flag */ +#define LL_DMA_IFCR_CTCIF2 DMA_IFCR_CTCIF2 /*!< Channel 2 transfer complete flag */ +#define LL_DMA_IFCR_CHTIF2 DMA_IFCR_CHTIF2 /*!< Channel 2 half transfer flag */ +#define LL_DMA_IFCR_CTEIF2 DMA_IFCR_CTEIF2 /*!< Channel 2 transfer error flag */ +#define LL_DMA_IFCR_CGIF3 DMA_IFCR_CGIF3 /*!< Channel 3 global flag */ +#define LL_DMA_IFCR_CTCIF3 DMA_IFCR_CTCIF3 /*!< Channel 3 transfer complete flag */ +#define LL_DMA_IFCR_CHTIF3 DMA_IFCR_CHTIF3 /*!< Channel 3 half transfer flag */ +#define LL_DMA_IFCR_CTEIF3 DMA_IFCR_CTEIF3 /*!< Channel 3 transfer error flag */ +#define LL_DMA_IFCR_CGIF4 DMA_IFCR_CGIF4 /*!< Channel 4 global flag */ +#define LL_DMA_IFCR_CTCIF4 DMA_IFCR_CTCIF4 /*!< Channel 4 transfer complete flag */ +#define LL_DMA_IFCR_CHTIF4 DMA_IFCR_CHTIF4 /*!< Channel 4 half transfer flag */ +#define LL_DMA_IFCR_CTEIF4 DMA_IFCR_CTEIF4 /*!< Channel 4 transfer error flag */ +#define LL_DMA_IFCR_CGIF5 DMA_IFCR_CGIF5 /*!< Channel 5 global flag */ +#define LL_DMA_IFCR_CTCIF5 DMA_IFCR_CTCIF5 /*!< Channel 5 transfer complete flag */ +#define LL_DMA_IFCR_CHTIF5 DMA_IFCR_CHTIF5 /*!< Channel 5 half transfer flag */ +#define LL_DMA_IFCR_CTEIF5 DMA_IFCR_CTEIF5 /*!< Channel 5 transfer error flag */ +#define LL_DMA_IFCR_CGIF6 DMA_IFCR_CGIF6 /*!< Channel 6 global flag */ +#define LL_DMA_IFCR_CTCIF6 DMA_IFCR_CTCIF6 /*!< Channel 6 transfer complete flag */ +#define LL_DMA_IFCR_CHTIF6 DMA_IFCR_CHTIF6 /*!< Channel 6 half transfer flag */ +#define LL_DMA_IFCR_CTEIF6 DMA_IFCR_CTEIF6 /*!< Channel 6 transfer error flag */ +#define LL_DMA_IFCR_CGIF7 DMA_IFCR_CGIF7 /*!< Channel 7 global flag */ +#define LL_DMA_IFCR_CTCIF7 DMA_IFCR_CTCIF7 /*!< Channel 7 transfer complete flag */ +#define LL_DMA_IFCR_CHTIF7 DMA_IFCR_CHTIF7 /*!< Channel 7 half transfer flag */ +#define LL_DMA_IFCR_CTEIF7 DMA_IFCR_CTEIF7 /*!< Channel 7 transfer error flag */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_DMA_ReadReg function + * @{ + */ +#define LL_DMA_ISR_GIF1 DMA_ISR_GIF1 /*!< Channel 1 global flag */ +#define LL_DMA_ISR_TCIF1 DMA_ISR_TCIF1 /*!< Channel 1 transfer complete flag */ +#define LL_DMA_ISR_HTIF1 DMA_ISR_HTIF1 /*!< Channel 1 half transfer flag */ +#define LL_DMA_ISR_TEIF1 DMA_ISR_TEIF1 /*!< Channel 1 transfer error flag */ +#define LL_DMA_ISR_GIF2 DMA_ISR_GIF2 /*!< Channel 2 global flag */ +#define LL_DMA_ISR_TCIF2 DMA_ISR_TCIF2 /*!< Channel 2 transfer complete flag */ +#define LL_DMA_ISR_HTIF2 DMA_ISR_HTIF2 /*!< Channel 2 half transfer flag */ +#define LL_DMA_ISR_TEIF2 DMA_ISR_TEIF2 /*!< Channel 2 transfer error flag */ +#define LL_DMA_ISR_GIF3 DMA_ISR_GIF3 /*!< Channel 3 global flag */ +#define LL_DMA_ISR_TCIF3 DMA_ISR_TCIF3 /*!< Channel 3 transfer complete flag */ +#define LL_DMA_ISR_HTIF3 DMA_ISR_HTIF3 /*!< Channel 3 half transfer flag */ +#define LL_DMA_ISR_TEIF3 DMA_ISR_TEIF3 /*!< Channel 3 transfer error flag */ +#define LL_DMA_ISR_GIF4 DMA_ISR_GIF4 /*!< Channel 4 global flag */ +#define LL_DMA_ISR_TCIF4 DMA_ISR_TCIF4 /*!< Channel 4 transfer complete flag */ +#define LL_DMA_ISR_HTIF4 DMA_ISR_HTIF4 /*!< Channel 4 half transfer flag */ +#define LL_DMA_ISR_TEIF4 DMA_ISR_TEIF4 /*!< Channel 4 transfer error flag */ +#define LL_DMA_ISR_GIF5 DMA_ISR_GIF5 /*!< Channel 5 global flag */ +#define LL_DMA_ISR_TCIF5 DMA_ISR_TCIF5 /*!< Channel 5 transfer complete flag */ +#define LL_DMA_ISR_HTIF5 DMA_ISR_HTIF5 /*!< Channel 5 half transfer flag */ +#define LL_DMA_ISR_TEIF5 DMA_ISR_TEIF5 /*!< Channel 5 transfer error flag */ +#define LL_DMA_ISR_GIF6 DMA_ISR_GIF6 /*!< Channel 6 global flag */ +#define LL_DMA_ISR_TCIF6 DMA_ISR_TCIF6 /*!< Channel 6 transfer complete flag */ +#define LL_DMA_ISR_HTIF6 DMA_ISR_HTIF6 /*!< Channel 6 half transfer flag */ +#define LL_DMA_ISR_TEIF6 DMA_ISR_TEIF6 /*!< Channel 6 transfer error flag */ +#define LL_DMA_ISR_GIF7 DMA_ISR_GIF7 /*!< Channel 7 global flag */ +#define LL_DMA_ISR_TCIF7 DMA_ISR_TCIF7 /*!< Channel 7 transfer complete flag */ +#define LL_DMA_ISR_HTIF7 DMA_ISR_HTIF7 /*!< Channel 7 half transfer flag */ +#define LL_DMA_ISR_TEIF7 DMA_ISR_TEIF7 /*!< Channel 7 transfer error flag */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_DMA_ReadReg and LL_DMA_WriteReg functions + * @{ + */ +#define LL_DMA_CCR_TCIE DMA_CCR_TCIE /*!< Transfer complete interrupt */ +#define LL_DMA_CCR_HTIE DMA_CCR_HTIE /*!< Half Transfer interrupt */ +#define LL_DMA_CCR_TEIE DMA_CCR_TEIE /*!< Transfer error interrupt */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_CHANNEL CHANNEL + * @{ + */ +#define LL_DMA_CHANNEL_1 ((uint32_t)0x00000001U) /*!< DMA Channel 1 */ +#define LL_DMA_CHANNEL_2 ((uint32_t)0x00000002U) /*!< DMA Channel 2 */ +#define LL_DMA_CHANNEL_3 ((uint32_t)0x00000003U) /*!< DMA Channel 3 */ +#define LL_DMA_CHANNEL_4 ((uint32_t)0x00000004U) /*!< DMA Channel 4 */ +#define LL_DMA_CHANNEL_5 ((uint32_t)0x00000005U) /*!< DMA Channel 5 */ +#define LL_DMA_CHANNEL_6 ((uint32_t)0x00000006U) /*!< DMA Channel 6 */ +#define LL_DMA_CHANNEL_7 ((uint32_t)0x00000007U) /*!< DMA Channel 7 */ +#if defined(USE_FULL_LL_DRIVER) +#define LL_DMA_CHANNEL_ALL ((uint32_t)0xFFFF0000U) /*!< DMA Channel all (used only for function @ref LL_DMA_DeInit(). */ +#endif /*USE_FULL_LL_DRIVER*/ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_DIRECTION Transfer Direction + * @{ + */ +#define LL_DMA_DIRECTION_PERIPH_TO_MEMORY ((uint32_t)0x00000000U) /*!< Peripheral to memory direction */ +#define LL_DMA_DIRECTION_MEMORY_TO_PERIPH DMA_CCR_DIR /*!< Memory to peripheral direction */ +#define LL_DMA_DIRECTION_MEMORY_TO_MEMORY DMA_CCR_MEM2MEM /*!< Memory to memory direction */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_MODE Transfer mode + * @{ + */ +#define LL_DMA_MODE_NORMAL ((uint32_t)0x00000000U) /*!< Normal Mode */ +#define LL_DMA_MODE_CIRCULAR DMA_CCR_CIRC /*!< Circular Mode */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_PERIPH Peripheral increment mode + * @{ + */ +#define LL_DMA_PERIPH_INCREMENT DMA_CCR_PINC /*!< Peripheral increment mode Enable */ +#define LL_DMA_PERIPH_NOINCREMENT ((uint32_t)0x00000000U) /*!< Peripheral increment mode Disable */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_MEMORY Memory increment mode + * @{ + */ +#define LL_DMA_MEMORY_INCREMENT DMA_CCR_MINC /*!< Memory increment mode Enable */ +#define LL_DMA_MEMORY_NOINCREMENT ((uint32_t)0x00000000U) /*!< Memory increment mode Disable */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_PDATAALIGN Peripheral data alignment + * @{ + */ +#define LL_DMA_PDATAALIGN_BYTE ((uint32_t)0x00000000U) /*!< Peripheral data alignment : Byte */ +#define LL_DMA_PDATAALIGN_HALFWORD DMA_CCR_PSIZE_0 /*!< Peripheral data alignment : HalfWord */ +#define LL_DMA_PDATAALIGN_WORD DMA_CCR_PSIZE_1 /*!< Peripheral data alignment : Word */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_MDATAALIGN Memory data alignment + * @{ + */ +#define LL_DMA_MDATAALIGN_BYTE ((uint32_t)0x00000000U) /*!< Memory data alignment : Byte */ +#define LL_DMA_MDATAALIGN_HALFWORD DMA_CCR_MSIZE_0 /*!< Memory data alignment : HalfWord */ +#define LL_DMA_MDATAALIGN_WORD DMA_CCR_MSIZE_1 /*!< Memory data alignment : Word */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_PRIORITY Transfer Priority level + * @{ + */ +#define LL_DMA_PRIORITY_LOW ((uint32_t)0x00000000U) /*!< Priority level : Low */ +#define LL_DMA_PRIORITY_MEDIUM DMA_CCR_PL_0 /*!< Priority level : Medium */ +#define LL_DMA_PRIORITY_HIGH DMA_CCR_PL_1 /*!< Priority level : High */ +#define LL_DMA_PRIORITY_VERYHIGH DMA_CCR_PL /*!< Priority level : Very_High */ +/** + * @} + */ + + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup DMA_LL_Exported_Macros DMA Exported Macros + * @{ + */ + +/** @defgroup DMA_LL_EM_WRITE_READ Common Write and read registers macros + * @{ + */ +/** + * @brief Write a value in DMA register + * @param __INSTANCE__ DMA Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_DMA_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in DMA register + * @param __INSTANCE__ DMA Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_DMA_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** @defgroup DMA_LL_EM_CONVERT_DMAxCHANNELy Convert DMAxChannely + * @{ + */ +/** + * @brief Convert DMAx_Channely into DMAx + * @param __CHANNEL_INSTANCE__ DMAx_Channely + * @retval DMAx + */ +#if defined(DMA2) +#define __LL_DMA_GET_INSTANCE(__CHANNEL_INSTANCE__) \ +(((uint32_t)(__CHANNEL_INSTANCE__) > ((uint32_t)DMA1_Channel7)) ? DMA2 : DMA1) +#else +#define __LL_DMA_GET_INSTANCE(__CHANNEL_INSTANCE__) (DMA1) +#endif + +/** + * @brief Convert DMAx_Channely into LL_DMA_CHANNEL_y + * @param __CHANNEL_INSTANCE__ DMAx_Channely + * @retval LL_DMA_CHANNEL_y + */ +#if defined (DMA2) +#if defined (DMA2_Channel6) && defined (DMA2_Channel7) +#define __LL_DMA_GET_CHANNEL(__CHANNEL_INSTANCE__) \ +(((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel1)) ? LL_DMA_CHANNEL_1 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel1)) ? LL_DMA_CHANNEL_1 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel2)) ? LL_DMA_CHANNEL_2 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel2)) ? LL_DMA_CHANNEL_2 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel3)) ? LL_DMA_CHANNEL_3 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel3)) ? LL_DMA_CHANNEL_3 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel4)) ? LL_DMA_CHANNEL_4 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel4)) ? LL_DMA_CHANNEL_4 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel5)) ? LL_DMA_CHANNEL_5 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel5)) ? LL_DMA_CHANNEL_5 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel6)) ? LL_DMA_CHANNEL_6 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel6)) ? LL_DMA_CHANNEL_6 : \ + LL_DMA_CHANNEL_7) +#else +#define __LL_DMA_GET_CHANNEL(__CHANNEL_INSTANCE__) \ +(((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel1)) ? LL_DMA_CHANNEL_1 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel1)) ? LL_DMA_CHANNEL_1 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel2)) ? LL_DMA_CHANNEL_2 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel2)) ? LL_DMA_CHANNEL_2 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel3)) ? LL_DMA_CHANNEL_3 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel3)) ? LL_DMA_CHANNEL_3 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel4)) ? LL_DMA_CHANNEL_4 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel4)) ? LL_DMA_CHANNEL_4 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel5)) ? LL_DMA_CHANNEL_5 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel5)) ? LL_DMA_CHANNEL_5 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel6)) ? LL_DMA_CHANNEL_6 : \ + LL_DMA_CHANNEL_7) +#endif +#else +#define __LL_DMA_GET_CHANNEL(__CHANNEL_INSTANCE__) \ +(((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel1)) ? LL_DMA_CHANNEL_1 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel2)) ? LL_DMA_CHANNEL_2 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel3)) ? LL_DMA_CHANNEL_3 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel4)) ? LL_DMA_CHANNEL_4 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel5)) ? LL_DMA_CHANNEL_5 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel6)) ? LL_DMA_CHANNEL_6 : \ + LL_DMA_CHANNEL_7) +#endif + +/** + * @brief Convert DMA Instance DMAx and LL_DMA_CHANNEL_y into DMAx_Channely + * @param __DMA_INSTANCE__ DMAx + * @param __CHANNEL__ LL_DMA_CHANNEL_y + * @retval DMAx_Channely + */ +#if defined (DMA2) +#if defined (DMA2_Channel6) && defined (DMA2_Channel7) +#define __LL_DMA_GET_CHANNEL_INSTANCE(__DMA_INSTANCE__, __CHANNEL__) \ +((((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_1))) ? DMA1_Channel1 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_1))) ? DMA2_Channel1 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_2))) ? DMA1_Channel2 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_2))) ? DMA2_Channel2 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_3))) ? DMA1_Channel3 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_3))) ? DMA2_Channel3 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_4))) ? DMA1_Channel4 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_4))) ? DMA2_Channel4 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_5))) ? DMA1_Channel5 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_5))) ? DMA2_Channel5 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_6))) ? DMA1_Channel6 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_6))) ? DMA2_Channel6 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_7))) ? DMA1_Channel7 : \ + DMA2_Channel7) +#else +#define __LL_DMA_GET_CHANNEL_INSTANCE(__DMA_INSTANCE__, __CHANNEL__) \ +((((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_1))) ? DMA1_Channel1 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_1))) ? DMA2_Channel1 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_2))) ? DMA1_Channel2 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_2))) ? DMA2_Channel2 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_3))) ? DMA1_Channel3 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_3))) ? DMA2_Channel3 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_4))) ? DMA1_Channel4 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_4))) ? DMA2_Channel4 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_5))) ? DMA1_Channel5 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_5))) ? DMA2_Channel5 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_6))) ? DMA1_Channel6 : \ + DMA1_Channel7) +#endif +#else +#define __LL_DMA_GET_CHANNEL_INSTANCE(__DMA_INSTANCE__, __CHANNEL__) \ +((((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_1))) ? DMA1_Channel1 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_2))) ? DMA1_Channel2 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_3))) ? DMA1_Channel3 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_4))) ? DMA1_Channel4 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_5))) ? DMA1_Channel5 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_6))) ? DMA1_Channel6 : \ + DMA1_Channel7) +#endif + +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup DMA_LL_Exported_Functions DMA Exported Functions + * @{ + */ + +/** @defgroup DMA_LL_EF_Configuration Configuration + * @{ + */ +/** + * @brief Enable DMA channel. + * @rmtoll CCR EN LL_DMA_EnableChannel + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_EnableChannel(DMA_TypeDef *DMAx, uint32_t Channel) +{ + SET_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_EN); +} + +/** + * @brief Disable DMA channel. + * @rmtoll CCR EN LL_DMA_DisableChannel + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_DisableChannel(DMA_TypeDef *DMAx, uint32_t Channel) +{ + CLEAR_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_EN); +} + +/** + * @brief Check if DMA channel is enabled or disabled. + * @rmtoll CCR EN LL_DMA_IsEnabledChannel + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsEnabledChannel(DMA_TypeDef *DMAx, uint32_t Channel) +{ + return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, + DMA_CCR_EN) == (DMA_CCR_EN)); +} + +/** + * @brief Configure all parameters link to DMA transfer. + * @rmtoll CCR DIR LL_DMA_ConfigTransfer\n + * CCR MEM2MEM LL_DMA_ConfigTransfer\n + * CCR CIRC LL_DMA_ConfigTransfer\n + * CCR PINC LL_DMA_ConfigTransfer\n + * CCR MINC LL_DMA_ConfigTransfer\n + * CCR PSIZE LL_DMA_ConfigTransfer\n + * CCR MSIZE LL_DMA_ConfigTransfer\n + * CCR PL LL_DMA_ConfigTransfer + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param Configuration This parameter must be a combination of all the following values: + * @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY or @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH or @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY + * @arg @ref LL_DMA_MODE_NORMAL or @ref LL_DMA_MODE_CIRCULAR + * @arg @ref LL_DMA_PERIPH_INCREMENT or @ref LL_DMA_PERIPH_NOINCREMENT + * @arg @ref LL_DMA_MEMORY_INCREMENT or @ref LL_DMA_MEMORY_NOINCREMENT + * @arg @ref LL_DMA_PDATAALIGN_BYTE or @ref LL_DMA_PDATAALIGN_HALFWORD or @ref LL_DMA_PDATAALIGN_WORD + * @arg @ref LL_DMA_MDATAALIGN_BYTE or @ref LL_DMA_MDATAALIGN_HALFWORD or @ref LL_DMA_MDATAALIGN_WORD + * @arg @ref LL_DMA_PRIORITY_LOW or @ref LL_DMA_PRIORITY_MEDIUM or @ref LL_DMA_PRIORITY_HIGH or @ref LL_DMA_PRIORITY_VERYHIGH + * @retval None + */ +__STATIC_INLINE void LL_DMA_ConfigTransfer(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t Configuration) +{ + MODIFY_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, + DMA_CCR_DIR | DMA_CCR_MEM2MEM | DMA_CCR_CIRC | DMA_CCR_PINC | DMA_CCR_MINC | DMA_CCR_PSIZE | DMA_CCR_MSIZE | DMA_CCR_PL, + Configuration); +} + +/** + * @brief Set Data transfer direction (read from peripheral or from memory). + * @rmtoll CCR DIR LL_DMA_SetDataTransferDirection\n + * CCR MEM2MEM LL_DMA_SetDataTransferDirection + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param Direction This parameter can be one of the following values: + * @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY + * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH + * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetDataTransferDirection(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t Direction) +{ + MODIFY_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, + DMA_CCR_DIR | DMA_CCR_MEM2MEM, Direction); +} + +/** + * @brief Get Data transfer direction (read from peripheral or from memory). + * @rmtoll CCR DIR LL_DMA_GetDataTransferDirection\n + * CCR MEM2MEM LL_DMA_GetDataTransferDirection + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY + * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH + * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY + */ +__STATIC_INLINE uint32_t LL_DMA_GetDataTransferDirection(DMA_TypeDef *DMAx, uint32_t Channel) +{ + return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, + DMA_CCR_DIR | DMA_CCR_MEM2MEM)); +} + +/** + * @brief Set DMA mode circular or normal. + * @note The circular buffer mode cannot be used if the memory-to-memory + * data transfer is configured on the selected Channel. + * @rmtoll CCR CIRC LL_DMA_SetMode + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param Mode This parameter can be one of the following values: + * @arg @ref LL_DMA_MODE_NORMAL + * @arg @ref LL_DMA_MODE_CIRCULAR + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetMode(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t Mode) +{ + MODIFY_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_CIRC, + Mode); +} + +/** + * @brief Get DMA mode circular or normal. + * @rmtoll CCR CIRC LL_DMA_GetMode + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_MODE_NORMAL + * @arg @ref LL_DMA_MODE_CIRCULAR + */ +__STATIC_INLINE uint32_t LL_DMA_GetMode(DMA_TypeDef *DMAx, uint32_t Channel) +{ + return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, + DMA_CCR_CIRC)); +} + +/** + * @brief Set Peripheral increment mode. + * @rmtoll CCR PINC LL_DMA_SetPeriphIncMode + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param PeriphOrM2MSrcIncMode This parameter can be one of the following values: + * @arg @ref LL_DMA_PERIPH_INCREMENT + * @arg @ref LL_DMA_PERIPH_NOINCREMENT + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetPeriphIncMode(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t PeriphOrM2MSrcIncMode) +{ + MODIFY_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_PINC, + PeriphOrM2MSrcIncMode); +} + +/** + * @brief Get Peripheral increment mode. + * @rmtoll CCR PINC LL_DMA_GetPeriphIncMode + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_PERIPH_INCREMENT + * @arg @ref LL_DMA_PERIPH_NOINCREMENT + */ +__STATIC_INLINE uint32_t LL_DMA_GetPeriphIncMode(DMA_TypeDef *DMAx, uint32_t Channel) +{ + return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, + DMA_CCR_PINC)); +} + +/** + * @brief Set Memory increment mode. + * @rmtoll CCR MINC LL_DMA_SetMemoryIncMode + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param MemoryOrM2MDstIncMode This parameter can be one of the following values: + * @arg @ref LL_DMA_MEMORY_INCREMENT + * @arg @ref LL_DMA_MEMORY_NOINCREMENT + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetMemoryIncMode(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t MemoryOrM2MDstIncMode) +{ + MODIFY_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_MINC, + MemoryOrM2MDstIncMode); +} + +/** + * @brief Get Memory increment mode. + * @rmtoll CCR MINC LL_DMA_GetMemoryIncMode + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_MEMORY_INCREMENT + * @arg @ref LL_DMA_MEMORY_NOINCREMENT + */ +__STATIC_INLINE uint32_t LL_DMA_GetMemoryIncMode(DMA_TypeDef *DMAx, uint32_t Channel) +{ + return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, + DMA_CCR_MINC)); +} + +/** + * @brief Set Peripheral size. + * @rmtoll CCR PSIZE LL_DMA_SetPeriphSize + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param PeriphOrM2MSrcDataSize This parameter can be one of the following values: + * @arg @ref LL_DMA_PDATAALIGN_BYTE + * @arg @ref LL_DMA_PDATAALIGN_HALFWORD + * @arg @ref LL_DMA_PDATAALIGN_WORD + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetPeriphSize(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t PeriphOrM2MSrcDataSize) +{ + MODIFY_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_PSIZE, + PeriphOrM2MSrcDataSize); +} + +/** + * @brief Get Peripheral size. + * @rmtoll CCR PSIZE LL_DMA_GetPeriphSize + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_PDATAALIGN_BYTE + * @arg @ref LL_DMA_PDATAALIGN_HALFWORD + * @arg @ref LL_DMA_PDATAALIGN_WORD + */ +__STATIC_INLINE uint32_t LL_DMA_GetPeriphSize(DMA_TypeDef *DMAx, uint32_t Channel) +{ + return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, + DMA_CCR_PSIZE)); +} + +/** + * @brief Set Memory size. + * @rmtoll CCR MSIZE LL_DMA_SetMemorySize + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param MemoryOrM2MDstDataSize This parameter can be one of the following values: + * @arg @ref LL_DMA_MDATAALIGN_BYTE + * @arg @ref LL_DMA_MDATAALIGN_HALFWORD + * @arg @ref LL_DMA_MDATAALIGN_WORD + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetMemorySize(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t MemoryOrM2MDstDataSize) +{ + MODIFY_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_MSIZE, + MemoryOrM2MDstDataSize); +} + +/** + * @brief Get Memory size. + * @rmtoll CCR MSIZE LL_DMA_GetMemorySize + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_MDATAALIGN_BYTE + * @arg @ref LL_DMA_MDATAALIGN_HALFWORD + * @arg @ref LL_DMA_MDATAALIGN_WORD + */ +__STATIC_INLINE uint32_t LL_DMA_GetMemorySize(DMA_TypeDef *DMAx, uint32_t Channel) +{ + return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, + DMA_CCR_MSIZE)); +} + +/** + * @brief Set Channel priority level. + * @rmtoll CCR PL LL_DMA_SetChannelPriorityLevel + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param Priority This parameter can be one of the following values: + * @arg @ref LL_DMA_PRIORITY_LOW + * @arg @ref LL_DMA_PRIORITY_MEDIUM + * @arg @ref LL_DMA_PRIORITY_HIGH + * @arg @ref LL_DMA_PRIORITY_VERYHIGH + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetChannelPriorityLevel(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t Priority) +{ + MODIFY_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_PL, + Priority); +} + +/** + * @brief Get Channel priority level. + * @rmtoll CCR PL LL_DMA_GetChannelPriorityLevel + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_PRIORITY_LOW + * @arg @ref LL_DMA_PRIORITY_MEDIUM + * @arg @ref LL_DMA_PRIORITY_HIGH + * @arg @ref LL_DMA_PRIORITY_VERYHIGH + */ +__STATIC_INLINE uint32_t LL_DMA_GetChannelPriorityLevel(DMA_TypeDef *DMAx, uint32_t Channel) +{ + return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, + DMA_CCR_PL)); +} + +/** + * @brief Set Number of data to transfer. + * @note This action has no effect if + * channel is enabled. + * @rmtoll CNDTR NDT LL_DMA_SetDataLength + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param NbData Between Min_Data = 0 and Max_Data = 0x0000FFFF + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetDataLength(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t NbData) +{ + MODIFY_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CNDTR, + DMA_CNDTR_NDT, NbData); +} + +/** + * @brief Get Number of data to transfer. + * @note Once the channel is enabled, the return value indicate the + * remaining bytes to be transmitted. + * @rmtoll CNDTR NDT LL_DMA_GetDataLength + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_DMA_GetDataLength(DMA_TypeDef *DMAx, uint32_t Channel) +{ + return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CNDTR, + DMA_CNDTR_NDT)); +} + +/** + * @brief Configure the Source and Destination addresses. + * @note Each IP using DMA provides an API to get directly the register adress (LL_PPP_DMA_GetRegAddr) + * @rmtoll CPAR PA LL_DMA_ConfigAddresses\n + * CMAR MA LL_DMA_ConfigAddresses + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param SrcAddress Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + * @param DstAddress Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + * @param Direction This parameter can be one of the following values: + * @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY + * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH + * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY + * @retval None + */ +__STATIC_INLINE void LL_DMA_ConfigAddresses(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t SrcAddress, + uint32_t DstAddress, uint32_t Direction) +{ + /* Direction Memory to Periph */ + if (Direction == LL_DMA_DIRECTION_MEMORY_TO_PERIPH) + { + MODIFY_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CMAR, DMA_CMAR_MA, + SrcAddress); + MODIFY_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CPAR, DMA_CPAR_PA, + DstAddress); + } + /* Direction Periph to Memory and Memory to Memory */ + else + { + MODIFY_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CPAR, DMA_CPAR_PA, + SrcAddress); + MODIFY_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CMAR, DMA_CMAR_MA, + DstAddress); + } +} + +/** + * @brief Set the Memory address. + * @note Interface used for direction LL_DMA_DIRECTION_PERIPH_TO_MEMORY or LL_DMA_DIRECTION_MEMORY_TO_PERIPH only. + * @rmtoll CMAR MA LL_DMA_SetMemoryAddress + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param MemoryAddress Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetMemoryAddress(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t MemoryAddress) +{ + MODIFY_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CMAR, DMA_CMAR_MA, + MemoryAddress); +} + +/** + * @brief Set the Peripheral address. + * @note Interface used for direction LL_DMA_DIRECTION_PERIPH_TO_MEMORY or LL_DMA_DIRECTION_MEMORY_TO_PERIPH only. + * @rmtoll CPAR PA LL_DMA_SetPeriphAddress + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param PeriphAddress Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetPeriphAddress(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t PeriphAddress) +{ + MODIFY_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CPAR, DMA_CPAR_PA, + PeriphAddress); +} + +/** + * @brief Get Memory address. + * @note Interface used for direction LL_DMA_DIRECTION_PERIPH_TO_MEMORY or LL_DMA_DIRECTION_MEMORY_TO_PERIPH only. + * @rmtoll CMAR MA LL_DMA_GetMemoryAddress + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_DMA_GetMemoryAddress(DMA_TypeDef *DMAx, uint32_t Channel) +{ + return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CMAR, + DMA_CMAR_MA)); +} + +/** + * @brief Get Peripheral address. + * @note Interface used for direction LL_DMA_DIRECTION_PERIPH_TO_MEMORY or LL_DMA_DIRECTION_MEMORY_TO_PERIPH only. + * @rmtoll CPAR PA LL_DMA_GetPeriphAddress + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_DMA_GetPeriphAddress(DMA_TypeDef *DMAx, uint32_t Channel) +{ + return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CPAR, + DMA_CPAR_PA)); +} + +/** + * @brief Set the Memory to Memory Source address. + * @note Interface used for direction LL_DMA_DIRECTION_MEMORY_TO_MEMORY only. + * @rmtoll CPAR PA LL_DMA_SetM2MSrcAddress + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param MemoryAddress Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetM2MSrcAddress(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t MemoryAddress) +{ + MODIFY_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CPAR, DMA_CPAR_PA, + MemoryAddress); +} + +/** + * @brief Set the Memory to Memory Destination address. + * @note Interface used for direction LL_DMA_DIRECTION_MEMORY_TO_MEMORY only. + * @rmtoll CMAR MA LL_DMA_SetM2MDstAddress + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param MemoryAddress Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetM2MDstAddress(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t MemoryAddress) +{ + MODIFY_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CMAR, DMA_CMAR_MA, + MemoryAddress); +} + +/** + * @brief Get the Memory to Memory Source address. + * @note Interface used for direction LL_DMA_DIRECTION_MEMORY_TO_MEMORY only. + * @rmtoll CPAR PA LL_DMA_GetM2MSrcAddress + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_DMA_GetM2MSrcAddress(DMA_TypeDef *DMAx, uint32_t Channel) +{ + return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CPAR, + DMA_CPAR_PA)); +} + +/** + * @brief Get the Memory to Memory Destination address. + * @note Interface used for direction LL_DMA_DIRECTION_MEMORY_TO_MEMORY only. + * @rmtoll CMAR MA LL_DMA_GetM2MDstAddress + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_DMA_GetM2MDstAddress(DMA_TypeDef *DMAx, uint32_t Channel) +{ + return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CMAR, + DMA_CMAR_MA)); +} + + +/** + * @} + */ + +/** @defgroup DMA_LL_EF_FLAG_Management FLAG_Management + * @{ + */ + +/** + * @brief Get Channel 1 global interrupt flag. + * @rmtoll ISR GIF1 LL_DMA_IsActiveFlag_GI1 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI1(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->ISR, DMA_ISR_GIF1) == (DMA_ISR_GIF1)); +} + +/** + * @brief Get Channel 2 global interrupt flag. + * @rmtoll ISR GIF2 LL_DMA_IsActiveFlag_GI2 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI2(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->ISR, DMA_ISR_GIF2) == (DMA_ISR_GIF2)); +} + +/** + * @brief Get Channel 3 global interrupt flag. + * @rmtoll ISR GIF3 LL_DMA_IsActiveFlag_GI3 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI3(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->ISR, DMA_ISR_GIF3) == (DMA_ISR_GIF3)); +} + +/** + * @brief Get Channel 4 global interrupt flag. + * @rmtoll ISR GIF4 LL_DMA_IsActiveFlag_GI4 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI4(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->ISR, DMA_ISR_GIF4) == (DMA_ISR_GIF4)); +} + +/** + * @brief Get Channel 5 global interrupt flag. + * @rmtoll ISR GIF5 LL_DMA_IsActiveFlag_GI5 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI5(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->ISR, DMA_ISR_GIF5) == (DMA_ISR_GIF5)); +} + +/** + * @brief Get Channel 6 global interrupt flag. + * @rmtoll ISR GIF6 LL_DMA_IsActiveFlag_GI6 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI6(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->ISR, DMA_ISR_GIF6) == (DMA_ISR_GIF6)); +} + +/** + * @brief Get Channel 7 global interrupt flag. + * @rmtoll ISR GIF7 LL_DMA_IsActiveFlag_GI7 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI7(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->ISR, DMA_ISR_GIF7) == (DMA_ISR_GIF7)); +} + +/** + * @brief Get Channel 1 transfer complete flag. + * @rmtoll ISR TCIF1 LL_DMA_IsActiveFlag_TC1 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC1(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->ISR, DMA_ISR_TCIF1) == (DMA_ISR_TCIF1)); +} + +/** + * @brief Get Channel 2 transfer complete flag. + * @rmtoll ISR TCIF2 LL_DMA_IsActiveFlag_TC2 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC2(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->ISR, DMA_ISR_TCIF2) == (DMA_ISR_TCIF2)); +} + +/** + * @brief Get Channel 3 transfer complete flag. + * @rmtoll ISR TCIF3 LL_DMA_IsActiveFlag_TC3 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC3(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->ISR, DMA_ISR_TCIF3) == (DMA_ISR_TCIF3)); +} + +/** + * @brief Get Channel 4 transfer complete flag. + * @rmtoll ISR TCIF4 LL_DMA_IsActiveFlag_TC4 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC4(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->ISR, DMA_ISR_TCIF4) == (DMA_ISR_TCIF4)); +} + +/** + * @brief Get Channel 5 transfer complete flag. + * @rmtoll ISR TCIF5 LL_DMA_IsActiveFlag_TC5 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC5(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->ISR, DMA_ISR_TCIF5) == (DMA_ISR_TCIF5)); +} + +/** + * @brief Get Channel 6 transfer complete flag. + * @rmtoll ISR TCIF6 LL_DMA_IsActiveFlag_TC6 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC6(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->ISR, DMA_ISR_TCIF6) == (DMA_ISR_TCIF6)); +} + +/** + * @brief Get Channel 7 transfer complete flag. + * @rmtoll ISR TCIF7 LL_DMA_IsActiveFlag_TC7 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC7(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->ISR, DMA_ISR_TCIF7) == (DMA_ISR_TCIF7)); +} + +/** + * @brief Get Channel 1 half transfer flag. + * @rmtoll ISR HTIF1 LL_DMA_IsActiveFlag_HT1 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT1(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->ISR, DMA_ISR_HTIF1) == (DMA_ISR_HTIF1)); +} + +/** + * @brief Get Channel 2 half transfer flag. + * @rmtoll ISR HTIF2 LL_DMA_IsActiveFlag_HT2 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT2(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->ISR, DMA_ISR_HTIF2) == (DMA_ISR_HTIF2)); +} + +/** + * @brief Get Channel 3 half transfer flag. + * @rmtoll ISR HTIF3 LL_DMA_IsActiveFlag_HT3 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT3(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->ISR, DMA_ISR_HTIF3) == (DMA_ISR_HTIF3)); +} + +/** + * @brief Get Channel 4 half transfer flag. + * @rmtoll ISR HTIF4 LL_DMA_IsActiveFlag_HT4 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT4(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->ISR, DMA_ISR_HTIF4) == (DMA_ISR_HTIF4)); +} + +/** + * @brief Get Channel 5 half transfer flag. + * @rmtoll ISR HTIF5 LL_DMA_IsActiveFlag_HT5 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT5(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->ISR, DMA_ISR_HTIF5) == (DMA_ISR_HTIF5)); +} + +/** + * @brief Get Channel 6 half transfer flag. + * @rmtoll ISR HTIF6 LL_DMA_IsActiveFlag_HT6 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT6(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->ISR, DMA_ISR_HTIF6) == (DMA_ISR_HTIF6)); +} + +/** + * @brief Get Channel 7 half transfer flag. + * @rmtoll ISR HTIF7 LL_DMA_IsActiveFlag_HT7 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT7(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->ISR, DMA_ISR_HTIF7) == (DMA_ISR_HTIF7)); +} + +/** + * @brief Get Channel 1 transfer error flag. + * @rmtoll ISR TEIF1 LL_DMA_IsActiveFlag_TE1 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE1(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->ISR, DMA_ISR_TEIF1) == (DMA_ISR_TEIF1)); +} + +/** + * @brief Get Channel 2 transfer error flag. + * @rmtoll ISR TEIF2 LL_DMA_IsActiveFlag_TE2 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE2(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->ISR, DMA_ISR_TEIF2) == (DMA_ISR_TEIF2)); +} + +/** + * @brief Get Channel 3 transfer error flag. + * @rmtoll ISR TEIF3 LL_DMA_IsActiveFlag_TE3 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE3(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->ISR, DMA_ISR_TEIF3) == (DMA_ISR_TEIF3)); +} + +/** + * @brief Get Channel 4 transfer error flag. + * @rmtoll ISR TEIF4 LL_DMA_IsActiveFlag_TE4 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE4(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->ISR, DMA_ISR_TEIF4) == (DMA_ISR_TEIF4)); +} + +/** + * @brief Get Channel 5 transfer error flag. + * @rmtoll ISR TEIF5 LL_DMA_IsActiveFlag_TE5 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE5(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->ISR, DMA_ISR_TEIF5) == (DMA_ISR_TEIF5)); +} + +/** + * @brief Get Channel 6 transfer error flag. + * @rmtoll ISR TEIF6 LL_DMA_IsActiveFlag_TE6 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE6(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->ISR, DMA_ISR_TEIF6) == (DMA_ISR_TEIF6)); +} + +/** + * @brief Get Channel 7 transfer error flag. + * @rmtoll ISR TEIF7 LL_DMA_IsActiveFlag_TE7 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE7(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->ISR, DMA_ISR_TEIF7) == (DMA_ISR_TEIF7)); +} + +/** + * @brief Clear Channel 1 global interrupt flag. + * @rmtoll IFCR CGIF1 LL_DMA_ClearFlag_GI1 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_GI1(DMA_TypeDef *DMAx) +{ + SET_BIT(DMAx->IFCR, DMA_IFCR_CGIF1); +} + +/** + * @brief Clear Channel 2 global interrupt flag. + * @rmtoll IFCR CGIF2 LL_DMA_ClearFlag_GI2 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_GI2(DMA_TypeDef *DMAx) +{ + SET_BIT(DMAx->IFCR, DMA_IFCR_CGIF2); +} + +/** + * @brief Clear Channel 3 global interrupt flag. + * @rmtoll IFCR CGIF3 LL_DMA_ClearFlag_GI3 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_GI3(DMA_TypeDef *DMAx) +{ + SET_BIT(DMAx->IFCR, DMA_IFCR_CGIF3); +} + +/** + * @brief Clear Channel 4 global interrupt flag. + * @rmtoll IFCR CGIF4 LL_DMA_ClearFlag_GI4 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_GI4(DMA_TypeDef *DMAx) +{ + SET_BIT(DMAx->IFCR, DMA_IFCR_CGIF4); +} + +/** + * @brief Clear Channel 5 global interrupt flag. + * @rmtoll IFCR CGIF5 LL_DMA_ClearFlag_GI5 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_GI5(DMA_TypeDef *DMAx) +{ + SET_BIT(DMAx->IFCR, DMA_IFCR_CGIF5); +} + +/** + * @brief Clear Channel 6 global interrupt flag. + * @rmtoll IFCR CGIF6 LL_DMA_ClearFlag_GI6 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_GI6(DMA_TypeDef *DMAx) +{ + SET_BIT(DMAx->IFCR, DMA_IFCR_CGIF6); +} + +/** + * @brief Clear Channel 7 global interrupt flag. + * @rmtoll IFCR CGIF7 LL_DMA_ClearFlag_GI7 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_GI7(DMA_TypeDef *DMAx) +{ + SET_BIT(DMAx->IFCR, DMA_IFCR_CGIF7); +} + +/** + * @brief Clear Channel 1 transfer complete flag. + * @rmtoll IFCR CTCIF1 LL_DMA_ClearFlag_TC1 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TC1(DMA_TypeDef *DMAx) +{ + SET_BIT(DMAx->IFCR, DMA_IFCR_CTCIF1); +} + +/** + * @brief Clear Channel 2 transfer complete flag. + * @rmtoll IFCR CTCIF2 LL_DMA_ClearFlag_TC2 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TC2(DMA_TypeDef *DMAx) +{ + SET_BIT(DMAx->IFCR, DMA_IFCR_CTCIF2); +} + +/** + * @brief Clear Channel 3 transfer complete flag. + * @rmtoll IFCR CTCIF3 LL_DMA_ClearFlag_TC3 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TC3(DMA_TypeDef *DMAx) +{ + SET_BIT(DMAx->IFCR, DMA_IFCR_CTCIF3); +} + +/** + * @brief Clear Channel 4 transfer complete flag. + * @rmtoll IFCR CTCIF4 LL_DMA_ClearFlag_TC4 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TC4(DMA_TypeDef *DMAx) +{ + SET_BIT(DMAx->IFCR, DMA_IFCR_CTCIF4); +} + +/** + * @brief Clear Channel 5 transfer complete flag. + * @rmtoll IFCR CTCIF5 LL_DMA_ClearFlag_TC5 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TC5(DMA_TypeDef *DMAx) +{ + SET_BIT(DMAx->IFCR, DMA_IFCR_CTCIF5); +} + +/** + * @brief Clear Channel 6 transfer complete flag. + * @rmtoll IFCR CTCIF6 LL_DMA_ClearFlag_TC6 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TC6(DMA_TypeDef *DMAx) +{ + SET_BIT(DMAx->IFCR, DMA_IFCR_CTCIF6); +} + +/** + * @brief Clear Channel 7 transfer complete flag. + * @rmtoll IFCR CTCIF7 LL_DMA_ClearFlag_TC7 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TC7(DMA_TypeDef *DMAx) +{ + SET_BIT(DMAx->IFCR, DMA_IFCR_CTCIF7); +} + +/** + * @brief Clear Channel 1 half transfer flag. + * @rmtoll IFCR CHTIF1 LL_DMA_ClearFlag_HT1 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_HT1(DMA_TypeDef *DMAx) +{ + SET_BIT(DMAx->IFCR, DMA_IFCR_CHTIF1); +} + +/** + * @brief Clear Channel 2 half transfer flag. + * @rmtoll IFCR CHTIF2 LL_DMA_ClearFlag_HT2 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_HT2(DMA_TypeDef *DMAx) +{ + SET_BIT(DMAx->IFCR, DMA_IFCR_CHTIF2); +} + +/** + * @brief Clear Channel 3 half transfer flag. + * @rmtoll IFCR CHTIF3 LL_DMA_ClearFlag_HT3 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_HT3(DMA_TypeDef *DMAx) +{ + SET_BIT(DMAx->IFCR, DMA_IFCR_CHTIF3); +} + +/** + * @brief Clear Channel 4 half transfer flag. + * @rmtoll IFCR CHTIF4 LL_DMA_ClearFlag_HT4 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_HT4(DMA_TypeDef *DMAx) +{ + SET_BIT(DMAx->IFCR, DMA_IFCR_CHTIF4); +} + +/** + * @brief Clear Channel 5 half transfer flag. + * @rmtoll IFCR CHTIF5 LL_DMA_ClearFlag_HT5 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_HT5(DMA_TypeDef *DMAx) +{ + SET_BIT(DMAx->IFCR, DMA_IFCR_CHTIF5); +} + +/** + * @brief Clear Channel 6 half transfer flag. + * @rmtoll IFCR CHTIF6 LL_DMA_ClearFlag_HT6 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_HT6(DMA_TypeDef *DMAx) +{ + SET_BIT(DMAx->IFCR, DMA_IFCR_CHTIF6); +} + +/** + * @brief Clear Channel 7 half transfer flag. + * @rmtoll IFCR CHTIF7 LL_DMA_ClearFlag_HT7 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_HT7(DMA_TypeDef *DMAx) +{ + SET_BIT(DMAx->IFCR, DMA_IFCR_CHTIF7); +} + +/** + * @brief Clear Channel 1 transfer error flag. + * @rmtoll IFCR CTEIF1 LL_DMA_ClearFlag_TE1 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TE1(DMA_TypeDef *DMAx) +{ + SET_BIT(DMAx->IFCR, DMA_IFCR_CTEIF1); +} + +/** + * @brief Clear Channel 2 transfer error flag. + * @rmtoll IFCR CTEIF2 LL_DMA_ClearFlag_TE2 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TE2(DMA_TypeDef *DMAx) +{ + SET_BIT(DMAx->IFCR, DMA_IFCR_CTEIF2); +} + +/** + * @brief Clear Channel 3 transfer error flag. + * @rmtoll IFCR CTEIF3 LL_DMA_ClearFlag_TE3 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TE3(DMA_TypeDef *DMAx) +{ + SET_BIT(DMAx->IFCR, DMA_IFCR_CTEIF3); +} + +/** + * @brief Clear Channel 4 transfer error flag. + * @rmtoll IFCR CTEIF4 LL_DMA_ClearFlag_TE4 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TE4(DMA_TypeDef *DMAx) +{ + SET_BIT(DMAx->IFCR, DMA_IFCR_CTEIF4); +} + +/** + * @brief Clear Channel 5 transfer error flag. + * @rmtoll IFCR CTEIF5 LL_DMA_ClearFlag_TE5 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TE5(DMA_TypeDef *DMAx) +{ + SET_BIT(DMAx->IFCR, DMA_IFCR_CTEIF5); +} + +/** + * @brief Clear Channel 6 transfer error flag. + * @rmtoll IFCR CTEIF6 LL_DMA_ClearFlag_TE6 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TE6(DMA_TypeDef *DMAx) +{ + SET_BIT(DMAx->IFCR, DMA_IFCR_CTEIF6); +} + +/** + * @brief Clear Channel 7 transfer error flag. + * @rmtoll IFCR CTEIF7 LL_DMA_ClearFlag_TE7 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TE7(DMA_TypeDef *DMAx) +{ + SET_BIT(DMAx->IFCR, DMA_IFCR_CTEIF7); +} + +/** + * @} + */ + +/** @defgroup DMA_LL_EF_IT_Management IT_Management + * @{ + */ +/** + * @brief Enable Transfer complete interrupt. + * @rmtoll CCR TCIE LL_DMA_EnableIT_TC + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_EnableIT_TC(DMA_TypeDef *DMAx, uint32_t Channel) +{ + SET_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_TCIE); +} + +/** + * @brief Enable Half transfer interrupt. + * @rmtoll CCR HTIE LL_DMA_EnableIT_HT + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_EnableIT_HT(DMA_TypeDef *DMAx, uint32_t Channel) +{ + SET_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_HTIE); +} + +/** + * @brief Enable Transfer error interrupt. + * @rmtoll CCR TEIE LL_DMA_EnableIT_TE + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_EnableIT_TE(DMA_TypeDef *DMAx, uint32_t Channel) +{ + SET_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_TEIE); +} + +/** + * @brief Disable Transfer complete interrupt. + * @rmtoll CCR TCIE LL_DMA_DisableIT_TC + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_DisableIT_TC(DMA_TypeDef *DMAx, uint32_t Channel) +{ + CLEAR_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_TCIE); +} + +/** + * @brief Disable Half transfer interrupt. + * @rmtoll CCR HTIE LL_DMA_DisableIT_HT + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_DisableIT_HT(DMA_TypeDef *DMAx, uint32_t Channel) +{ + CLEAR_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_HTIE); +} + +/** + * @brief Disable Transfer error interrupt. + * @rmtoll CCR TEIE LL_DMA_DisableIT_TE + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_DisableIT_TE(DMA_TypeDef *DMAx, uint32_t Channel) +{ + CLEAR_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_TEIE); +} + +/** + * @brief Check if Transfer complete Interrupt is enabled. + * @rmtoll CCR TCIE LL_DMA_IsEnabledIT_TC + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_TC(DMA_TypeDef *DMAx, uint32_t Channel) +{ + return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, + DMA_CCR_TCIE) == (DMA_CCR_TCIE)); +} + +/** + * @brief Check if Half transfer Interrupt is enabled. + * @rmtoll CCR HTIE LL_DMA_IsEnabledIT_HT + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_HT(DMA_TypeDef *DMAx, uint32_t Channel) +{ + return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, + DMA_CCR_HTIE) == (DMA_CCR_HTIE)); +} + +/** + * @brief Check if Transfer error Interrupt is enabled. + * @rmtoll CCR TEIE LL_DMA_IsEnabledIT_TE + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_TE(DMA_TypeDef *DMAx, uint32_t Channel) +{ + return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, + DMA_CCR_TEIE) == (DMA_CCR_TEIE)); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup DMA_LL_EF_Init Initialization and de-initialization functions + * @{ + */ + +uint32_t LL_DMA_Init(DMA_TypeDef *DMAx, uint32_t Channel, LL_DMA_InitTypeDef *DMA_InitStruct); +uint32_t LL_DMA_DeInit(DMA_TypeDef *DMAx, uint32_t Channel); +void LL_DMA_StructInit(LL_DMA_InitTypeDef *DMA_InitStruct); + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* DMA1 || DMA2 */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32L1xx_LL_DMA_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_ll_exti.h b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_ll_exti.h new file mode 100755 index 0000000..201ffbb --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_ll_exti.h @@ -0,0 +1,1032 @@ +/** + ****************************************************************************** + * @file stm32l1xx_ll_exti.h + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief Header file of EXTI LL module. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L1xx_LL_EXTI_H +#define __STM32L1xx_LL_EXTI_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx.h" + +/** @addtogroup STM32L1xx_LL_Driver + * @{ + */ + +#if defined (EXTI) + +/** @defgroup EXTI_LL EXTI + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private Macros ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup EXTI_LL_Private_Macros EXTI Private Macros + * @{ + */ +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup EXTI_LL_ES_INIT EXTI Exported Init structure + * @{ + */ +typedef struct +{ + + uint32_t Line_0_31; /*!< Specifies the EXTI lines to be enabled or disabled for Lines in range 0 to 31 + This parameter can be any combination of @ref EXTI_LL_EC_LINE */ + + FunctionalState LineCommand; /*!< Specifies the new state of the selected EXTI lines. + This parameter can be set either to ENABLE or DISABLE */ + + uint8_t Mode; /*!< Specifies the mode for the EXTI lines. + This parameter can be a value of @ref EXTI_LL_EC_MODE. */ + + uint8_t Trigger; /*!< Specifies the trigger signal active edge for the EXTI lines. + This parameter can be a value of @ref EXTI_LL_EC_TRIGGER. */ +} LL_EXTI_InitTypeDef; + +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup EXTI_LL_Exported_Constants EXTI Exported Constants + * @{ + */ + +/** @defgroup EXTI_LL_EC_LINE LINE + * @{ + */ +#define LL_EXTI_LINE_0 EXTI_IMR_IM0 /*!< Extended line 0 */ +#define LL_EXTI_LINE_1 EXTI_IMR_IM1 /*!< Extended line 1 */ +#define LL_EXTI_LINE_2 EXTI_IMR_IM2 /*!< Extended line 2 */ +#define LL_EXTI_LINE_3 EXTI_IMR_IM3 /*!< Extended line 3 */ +#define LL_EXTI_LINE_4 EXTI_IMR_IM4 /*!< Extended line 4 */ +#define LL_EXTI_LINE_5 EXTI_IMR_IM5 /*!< Extended line 5 */ +#define LL_EXTI_LINE_6 EXTI_IMR_IM6 /*!< Extended line 6 */ +#define LL_EXTI_LINE_7 EXTI_IMR_IM7 /*!< Extended line 7 */ +#define LL_EXTI_LINE_8 EXTI_IMR_IM8 /*!< Extended line 8 */ +#define LL_EXTI_LINE_9 EXTI_IMR_IM9 /*!< Extended line 9 */ +#define LL_EXTI_LINE_10 EXTI_IMR_IM10 /*!< Extended line 10 */ +#define LL_EXTI_LINE_11 EXTI_IMR_IM11 /*!< Extended line 11 */ +#define LL_EXTI_LINE_12 EXTI_IMR_IM12 /*!< Extended line 12 */ +#define LL_EXTI_LINE_13 EXTI_IMR_IM13 /*!< Extended line 13 */ +#define LL_EXTI_LINE_14 EXTI_IMR_IM14 /*!< Extended line 14 */ +#define LL_EXTI_LINE_15 EXTI_IMR_IM15 /*!< Extended line 15 */ +#if defined(EXTI_IMR_IM16) +#define LL_EXTI_LINE_16 EXTI_IMR_IM16 /*!< Extended line 16 */ +#endif +#define LL_EXTI_LINE_17 EXTI_IMR_IM17 /*!< Extended line 17 */ +#define LL_EXTI_LINE_18 EXTI_IMR_IM18 /*!< Extended line 18 */ +#define LL_EXTI_LINE_19 EXTI_IMR_IM19 /*!< Extended line 19 */ +#if defined(EXTI_IMR_IM20) +#define LL_EXTI_LINE_20 EXTI_IMR_IM20 /*!< Extended line 20 */ +#endif +#if defined(EXTI_IMR_IM21) +#define LL_EXTI_LINE_21 EXTI_IMR_IM21 /*!< Extended line 21 */ +#endif +#if defined(EXTI_IMR_IM22) +#define LL_EXTI_LINE_22 EXTI_IMR_IM22 /*!< Extended line 22 */ +#endif +#define LL_EXTI_LINE_23 EXTI_IMR_IM23 /*!< Extended line 23 */ +#if defined(EXTI_IMR_IM24) +#define LL_EXTI_LINE_24 EXTI_IMR_IM24 /*!< Extended line 24 */ +#endif +#if defined(EXTI_IMR_IM25) +#define LL_EXTI_LINE_25 EXTI_IMR_IM25 /*!< Extended line 25 */ +#endif +#if defined(EXTI_IMR_IM26) +#define LL_EXTI_LINE_26 EXTI_IMR_IM26 /*!< Extended line 26 */ +#endif +#if defined(EXTI_IMR_IM27) +#define LL_EXTI_LINE_27 EXTI_IMR_IM27 /*!< Extended line 27 */ +#endif +#if defined(EXTI_IMR_IM28) +#define LL_EXTI_LINE_28 EXTI_IMR_IM28 /*!< Extended line 28 */ +#endif +#if defined(EXTI_IMR_IM29) +#define LL_EXTI_LINE_29 EXTI_IMR_IM29 /*!< Extended line 29 */ +#endif +#if defined(EXTI_IMR_IM30) +#define LL_EXTI_LINE_30 EXTI_IMR_IM30 /*!< Extended line 30 */ +#endif +#if defined(EXTI_IMR_IM31) +#define LL_EXTI_LINE_31 EXTI_IMR_IM31 /*!< Extended line 31 */ +#endif +#define LL_EXTI_LINE_ALL_0_31 EXTI_IMR_IM /*!< All Extended line not reserved*/ + + +#define LL_EXTI_LINE_ALL ((uint32_t)0xFFFFFFFFU) /*!< All Extended line */ + +#if defined(USE_FULL_LL_DRIVER) +#define LL_EXTI_LINE_NONE ((uint32_t)0x00000000U) /*!< None Extended line */ +#endif /*USE_FULL_LL_DRIVER*/ + +/** + * @} + */ +#if defined(USE_FULL_LL_DRIVER) + +/** @defgroup EXTI_LL_EC_MODE Mode + * @{ + */ +#define LL_EXTI_MODE_IT ((uint8_t)0x00U) /*!< Interrupt Mode */ +#define LL_EXTI_MODE_EVENT ((uint8_t)0x01U) /*!< Event Mode */ +#define LL_EXTI_MODE_IT_EVENT ((uint8_t)0x02U) /*!< Interrupt & Event Mode */ +/** + * @} + */ + +/** @defgroup EXTI_LL_EC_TRIGGER Edge Trigger + * @{ + */ +#define LL_EXTI_TRIGGER_NONE ((uint8_t)0x00U) /*!< No Trigger Mode */ +#define LL_EXTI_TRIGGER_RISING ((uint8_t)0x01U) /*!< Trigger Rising Mode */ +#define LL_EXTI_TRIGGER_FALLING ((uint8_t)0x02U) /*!< Trigger Falling Mode */ +#define LL_EXTI_TRIGGER_RISING_FALLING ((uint8_t)0x03U) /*!< Trigger Rising & Falling Mode */ + +/** + * @} + */ + + +#endif /*USE_FULL_LL_DRIVER*/ + + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup EXTI_LL_Exported_Macros EXTI Exported Macros + * @{ + */ + +/** @defgroup EXTI_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in EXTI register + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_EXTI_WriteReg(__REG__, __VALUE__) WRITE_REG(EXTI->__REG__, (__VALUE__)) + +/** + * @brief Read a value in EXTI register + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_EXTI_ReadReg(__REG__) READ_REG(EXTI->__REG__) +/** + * @} + */ + + +/** + * @} + */ + + + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup EXTI_LL_Exported_Functions EXTI Exported Functions + * @{ + */ +/** @defgroup EXTI_LL_EF_IT_Management IT_Management + * @{ + */ + +/** + * @brief Enable ExtiLine Interrupt request for Lines in range 0 to 31 + * @note The reset value for the direct or internal lines (see RM) + * is set to 1 in order to enable the interrupt by default. + * Bits are set automatically at Power on. + * @rmtoll IMR IMx LL_EXTI_EnableIT_0_31 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_22 + * @arg @ref LL_EXTI_LINE_23 + * @arg @ref LL_EXTI_LINE_24 + * @arg @ref LL_EXTI_LINE_25 + * @arg @ref LL_EXTI_LINE_26 + * @arg @ref LL_EXTI_LINE_27 + * @arg @ref LL_EXTI_LINE_28 + * @arg @ref LL_EXTI_LINE_29 + * @arg @ref LL_EXTI_LINE_30 + * @arg @ref LL_EXTI_LINE_31 + * @arg @ref LL_EXTI_LINE_ALL_0_31 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_EnableIT_0_31(uint32_t ExtiLine) +{ + SET_BIT(EXTI->IMR, ExtiLine); +} + +/** + * @brief Disable ExtiLine Interrupt request for Lines in range 0 to 31 + * @note The reset value for the direct or internal lines (see RM) + * is set to 1 in order to enable the interrupt by default. + * Bits are set automatically at Power on. + * @rmtoll IMR IMx LL_EXTI_DisableIT_0_31 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_22 + * @arg @ref LL_EXTI_LINE_23 + * @arg @ref LL_EXTI_LINE_24 + * @arg @ref LL_EXTI_LINE_25 + * @arg @ref LL_EXTI_LINE_26 + * @arg @ref LL_EXTI_LINE_27 + * @arg @ref LL_EXTI_LINE_28 + * @arg @ref LL_EXTI_LINE_29 + * @arg @ref LL_EXTI_LINE_30 + * @arg @ref LL_EXTI_LINE_31 + * @arg @ref LL_EXTI_LINE_ALL_0_31 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_DisableIT_0_31(uint32_t ExtiLine) +{ + CLEAR_BIT(EXTI->IMR, ExtiLine); +} + + +/** + * @brief Indicate if ExtiLine Interrupt request is enabled for Lines in range 0 to 31 + * @note The reset value for the direct or internal lines (see RM) + * is set to 1 in order to enable the interrupt by default. + * Bits are set automatically at Power on. + * @rmtoll IMR IMx LL_EXTI_IsEnabledIT_0_31 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_22 + * @arg @ref LL_EXTI_LINE_23 + * @arg @ref LL_EXTI_LINE_24 + * @arg @ref LL_EXTI_LINE_25 + * @arg @ref LL_EXTI_LINE_26 + * @arg @ref LL_EXTI_LINE_27 + * @arg @ref LL_EXTI_LINE_28 + * @arg @ref LL_EXTI_LINE_29 + * @arg @ref LL_EXTI_LINE_30 + * @arg @ref LL_EXTI_LINE_31 + * @arg @ref LL_EXTI_LINE_ALL_0_31 + * @note Please check each device line mapping for EXTI Line availability + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsEnabledIT_0_31(uint32_t ExtiLine) +{ + return (READ_BIT(EXTI->IMR, ExtiLine) == (ExtiLine)); +} + + +/** + * @} + */ + +/** @defgroup EXTI_LL_EF_Event_Management Event_Management + * @{ + */ + +/** + * @brief Enable ExtiLine Event request for Lines in range 0 to 31 + * @rmtoll EMR EMx LL_EXTI_EnableEvent_0_31 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_22 + * @arg @ref LL_EXTI_LINE_23 + * @arg @ref LL_EXTI_LINE_24 + * @arg @ref LL_EXTI_LINE_25 + * @arg @ref LL_EXTI_LINE_26 + * @arg @ref LL_EXTI_LINE_27 + * @arg @ref LL_EXTI_LINE_28 + * @arg @ref LL_EXTI_LINE_29 + * @arg @ref LL_EXTI_LINE_30 + * @arg @ref LL_EXTI_LINE_31 + * @arg @ref LL_EXTI_LINE_ALL_0_31 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_EnableEvent_0_31(uint32_t ExtiLine) +{ + SET_BIT(EXTI->EMR, ExtiLine); + +} + + +/** + * @brief Disable ExtiLine Event request for Lines in range 0 to 31 + * @rmtoll EMR EMx LL_EXTI_DisableEvent_0_31 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_22 + * @arg @ref LL_EXTI_LINE_23 + * @arg @ref LL_EXTI_LINE_24 + * @arg @ref LL_EXTI_LINE_25 + * @arg @ref LL_EXTI_LINE_26 + * @arg @ref LL_EXTI_LINE_27 + * @arg @ref LL_EXTI_LINE_28 + * @arg @ref LL_EXTI_LINE_29 + * @arg @ref LL_EXTI_LINE_30 + * @arg @ref LL_EXTI_LINE_31 + * @arg @ref LL_EXTI_LINE_ALL_0_31 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_DisableEvent_0_31(uint32_t ExtiLine) +{ + CLEAR_BIT(EXTI->EMR, ExtiLine); +} + + +/** + * @brief Indicate if ExtiLine Event request is enabled for Lines in range 0 to 31 + * @rmtoll EMR EMx LL_EXTI_IsEnabledEvent_0_31 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_22 + * @arg @ref LL_EXTI_LINE_23 + * @arg @ref LL_EXTI_LINE_24 + * @arg @ref LL_EXTI_LINE_25 + * @arg @ref LL_EXTI_LINE_26 + * @arg @ref LL_EXTI_LINE_27 + * @arg @ref LL_EXTI_LINE_28 + * @arg @ref LL_EXTI_LINE_29 + * @arg @ref LL_EXTI_LINE_30 + * @arg @ref LL_EXTI_LINE_31 + * @arg @ref LL_EXTI_LINE_ALL_0_31 + * @note Please check each device line mapping for EXTI Line availability + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsEnabledEvent_0_31(uint32_t ExtiLine) +{ + return (READ_BIT(EXTI->EMR, ExtiLine) == (ExtiLine)); + +} + + +/** + * @} + */ + +/** @defgroup EXTI_LL_EF_Rising_Trigger_Management Rising_Trigger_Management + * @{ + */ + +/** + * @brief Enable ExtiLine Rising Edge Trigger for Lines in range 0 to 31 + * @note The configurable wakeup lines are edge-triggered. No glitch must be + * generated on these lines. If a rising edge on a configurable interrupt + * line occurs during a write operation in the EXTI_RTSR register, the + * pending bit is not set. + * Rising and falling edge triggers can be set for + * the same interrupt line. In this case, both generate a trigger + * condition. + * @rmtoll RTSR RTx LL_EXTI_EnableRisingTrig_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_22 + * @arg @ref LL_EXTI_LINE_29 + * @arg @ref LL_EXTI_LINE_30 + * @arg @ref LL_EXTI_LINE_31 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_EnableRisingTrig_0_31(uint32_t ExtiLine) +{ + SET_BIT(EXTI->RTSR, ExtiLine); + +} + + +/** + * @brief Disable ExtiLine Rising Edge Trigger for Lines in range 0 to 31 + * @note The configurable wakeup lines are edge-triggered. No glitch must be + * generated on these lines. If a rising edge on a configurable interrupt + * line occurs during a write operation in the EXTI_RTSR register, the + * pending bit is not set. + * Rising and falling edge triggers can be set for + * the same interrupt line. In this case, both generate a trigger + * condition. + * @rmtoll RTSR RTx LL_EXTI_DisableRisingTrig_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_22 + * @arg @ref LL_EXTI_LINE_29 + * @arg @ref LL_EXTI_LINE_30 + * @arg @ref LL_EXTI_LINE_31 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_DisableRisingTrig_0_31(uint32_t ExtiLine) +{ + CLEAR_BIT(EXTI->RTSR, ExtiLine); + +} + + +/** + * @brief Check if rising edge trigger is enabled for Lines in range 0 to 31 + * @rmtoll RTSR RTx LL_EXTI_IsEnabledRisingTrig_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_22 + * @arg @ref LL_EXTI_LINE_29 + * @arg @ref LL_EXTI_LINE_30 + * @arg @ref LL_EXTI_LINE_31 + * @note Please check each device line mapping for EXTI Line availability + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsEnabledRisingTrig_0_31(uint32_t ExtiLine) +{ + return (READ_BIT(EXTI->RTSR, ExtiLine) == (ExtiLine)); +} + + +/** + * @} + */ + +/** @defgroup EXTI_LL_EF_Falling_Trigger_Management Falling_Trigger_Management + * @{ + */ + +/** + * @brief Enable ExtiLine Falling Edge Trigger for Lines in range 0 to 31 + * @note The configurable wakeup lines are edge-triggered. No glitch must be + * generated on these lines. If a falling edge on a configurable interrupt + * line occurs during a write operation in the EXTI_FTSR register, the + * pending bit is not set. + * Rising and falling edge triggers can be set for + * the same interrupt line. In this case, both generate a trigger + * condition. + * @rmtoll FTSR FTx LL_EXTI_EnableFallingTrig_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_22 + * @arg @ref LL_EXTI_LINE_29 + * @arg @ref LL_EXTI_LINE_30 + * @arg @ref LL_EXTI_LINE_31 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_EnableFallingTrig_0_31(uint32_t ExtiLine) +{ + SET_BIT(EXTI->FTSR, ExtiLine); +} + + +/** + * @brief Disable ExtiLine Falling Edge Trigger for Lines in range 0 to 31 + * @note The configurable wakeup lines are edge-triggered. No glitch must be + * generated on these lines. If a Falling edge on a configurable interrupt + * line occurs during a write operation in the EXTI_FTSR register, the + * pending bit is not set. + * Rising and falling edge triggers can be set for the same interrupt line. + * In this case, both generate a trigger condition. + * @rmtoll FTSR FTx LL_EXTI_DisableFallingTrig_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_22 + * @arg @ref LL_EXTI_LINE_29 + * @arg @ref LL_EXTI_LINE_30 + * @arg @ref LL_EXTI_LINE_31 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_DisableFallingTrig_0_31(uint32_t ExtiLine) +{ + CLEAR_BIT(EXTI->FTSR, ExtiLine); +} + + +/** + * @brief Check if falling edge trigger is enabled for Lines in range 0 to 31 + * @rmtoll FTSR FTx LL_EXTI_IsEnabledFallingTrig_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_22 + * @arg @ref LL_EXTI_LINE_29 + * @arg @ref LL_EXTI_LINE_30 + * @arg @ref LL_EXTI_LINE_31 + * @note Please check each device line mapping for EXTI Line availability + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsEnabledFallingTrig_0_31(uint32_t ExtiLine) +{ + return (READ_BIT(EXTI->FTSR, ExtiLine) == (ExtiLine)); +} + + +/** + * @} + */ + +/** @defgroup EXTI_LL_EF_Software_Interrupt_Management Software_Interrupt_Management + * @{ + */ + +/** + * @brief Generate a software Interrupt Event for Lines in range 0 to 31 + * @note If the interrupt is enabled on this line in the EXTI_IMR, writing a 1 to + * this bit when it is at '0' sets the corresponding pending bit in EXTI_PR + * resulting in an interrupt request generation. + * This bit is cleared by clearing the corresponding bit in the EXTI_PR + * register (by writing a 1 into the bit) + * @rmtoll SWIER SWIx LL_EXTI_GenerateSWI_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_22 + * @arg @ref LL_EXTI_LINE_29 + * @arg @ref LL_EXTI_LINE_30 + * @arg @ref LL_EXTI_LINE_31 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_GenerateSWI_0_31(uint32_t ExtiLine) +{ + SET_BIT(EXTI->SWIER, ExtiLine); +} + + +/** + * @} + */ + +/** @defgroup EXTI_LL_EF_Flag_Management Flag_Management + * @{ + */ + +/** + * @brief Check if the ExtLine Flag is set or not for Lines in range 0 to 31 + * @note This bit is set when the selected edge event arrives on the interrupt + * line. This bit is cleared by writing a 1 to the bit. + * @rmtoll PR PIFx LL_EXTI_IsActiveFlag_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_22 + * @arg @ref LL_EXTI_LINE_29 + * @arg @ref LL_EXTI_LINE_30 + * @arg @ref LL_EXTI_LINE_31 + * @note Please check each device line mapping for EXTI Line availability + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsActiveFlag_0_31(uint32_t ExtiLine) +{ + return (READ_BIT(EXTI->PR, ExtiLine) == (ExtiLine)); +} + + +/** + * @brief Read ExtLine Combination Flag for Lines in range 0 to 31 + * @note This bit is set when the selected edge event arrives on the interrupt + * line. This bit is cleared by writing a 1 to the bit. + * @rmtoll PR PIFx LL_EXTI_ReadFlag_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_22 + * @arg @ref LL_EXTI_LINE_29 + * @arg @ref LL_EXTI_LINE_30 + * @arg @ref LL_EXTI_LINE_31 + * @note Please check each device line mapping for EXTI Line availability + * @retval @note This bit is set when the selected edge event arrives on the interrupt + */ +__STATIC_INLINE uint32_t LL_EXTI_ReadFlag_0_31(uint32_t ExtiLine) +{ + return (uint32_t)(READ_BIT(EXTI->PR, ExtiLine)); +} + + +/** + * @brief Clear ExtLine Flags for Lines in range 0 to 31 + * @note This bit is set when the selected edge event arrives on the interrupt + * line. This bit is cleared by writing a 1 to the bit. + * @rmtoll PR PIFx LL_EXTI_ClearFlag_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_22 + * @arg @ref LL_EXTI_LINE_29 + * @arg @ref LL_EXTI_LINE_30 + * @arg @ref LL_EXTI_LINE_31 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_ClearFlag_0_31(uint32_t ExtiLine) +{ + WRITE_REG(EXTI->PR, ExtiLine); +} + + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup EXTI_LL_EF_Init Initialization and de-initialization functions + * @{ + */ + +uint32_t LL_EXTI_Init(LL_EXTI_InitTypeDef *EXTI_InitStruct); +uint32_t LL_EXTI_DeInit(void); +void LL_EXTI_StructInit(LL_EXTI_InitTypeDef *EXTI_InitStruct); + + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* EXTI */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32L1xx_LL_EXTI_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_ll_fsmc.h b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_ll_fsmc.h new file mode 100755 index 0000000..9a89a1e --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_ll_fsmc.h @@ -0,0 +1,580 @@ +/** + ****************************************************************************** + * @file stm32l1xx_ll_fsmc.h + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief Header file of FSMC HAL module. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L1xx_LL_FSMC_H +#define __STM32L1xx_LL_FSMC_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_hal_def.h" + +/** @addtogroup STM32L1xx_HAL_Driver + * @{ + */ + +#if defined(FSMC_BANK1) + +/** @addtogroup FSMC_LL + * @{ + */ + +/** @addtogroup FSMC_LL_Private_Macros + * @{ + */ + +#define IS_FSMC_NORSRAM_BANK(__BANK__) (((__BANK__) == FSMC_NORSRAM_BANK1) || \ + ((__BANK__) == FSMC_NORSRAM_BANK2) || \ + ((__BANK__) == FSMC_NORSRAM_BANK3) || \ + ((__BANK__) == FSMC_NORSRAM_BANK4)) + +#define IS_FSMC_MUX(__MUX__) (((__MUX__) == FSMC_DATA_ADDRESS_MUX_DISABLE) || \ + ((__MUX__) == FSMC_DATA_ADDRESS_MUX_ENABLE)) + +#define IS_FSMC_MEMORY(__MEMORY__) (((__MEMORY__) == FSMC_MEMORY_TYPE_SRAM) || \ + ((__MEMORY__) == FSMC_MEMORY_TYPE_PSRAM)|| \ + ((__MEMORY__) == FSMC_MEMORY_TYPE_NOR)) + +#define IS_FSMC_NORSRAM_MEMORY_WIDTH(__WIDTH__) (((__WIDTH__) == FSMC_NORSRAM_MEM_BUS_WIDTH_8) || \ + ((__WIDTH__) == FSMC_NORSRAM_MEM_BUS_WIDTH_16) || \ + ((__WIDTH__) == FSMC_NORSRAM_MEM_BUS_WIDTH_32)) + +#define IS_FSMC_WRITE_BURST(__BURST__) (((__BURST__) == FSMC_WRITE_BURST_DISABLE) || \ + ((__BURST__) == FSMC_WRITE_BURST_ENABLE)) + +#define IS_FSMC_ACCESS_MODE(__MODE__) (((__MODE__) == FSMC_ACCESS_MODE_A) || \ + ((__MODE__) == FSMC_ACCESS_MODE_B) || \ + ((__MODE__) == FSMC_ACCESS_MODE_C) || \ + ((__MODE__) == FSMC_ACCESS_MODE_D)) + + +/** @defgroup FSMC_NORSRAM_Device_Instance FSMC NOR/SRAM Device Instance + * @{ + */ + +#define IS_FSMC_NORSRAM_DEVICE(__INSTANCE__) ((__INSTANCE__) == FSMC_NORSRAM_DEVICE) + +/** + * @} + */ + +/** @defgroup FSMC_NORSRAM_EXTENDED_Device_Instance FSMC NOR/SRAM EXTENDED Device Instance + * @{ + */ + +#define IS_FSMC_NORSRAM_EXTENDED_DEVICE(__INSTANCE__) ((__INSTANCE__) == FSMC_NORSRAM_EXTENDED_DEVICE) + +/** + * @} + */ + +#define IS_FSMC_BURSTMODE(__STATE__) (((__STATE__) == FSMC_BURST_ACCESS_MODE_DISABLE) || \ + ((__STATE__) == FSMC_BURST_ACCESS_MODE_ENABLE)) + +#define IS_FSMC_WAIT_POLARITY(__POLARITY__) (((__POLARITY__) == FSMC_WAIT_SIGNAL_POLARITY_LOW) || \ + ((__POLARITY__) == FSMC_WAIT_SIGNAL_POLARITY_HIGH)) + +#define IS_FSMC_WRAP_MODE(__MODE__) (((__MODE__) == FSMC_WRAP_MODE_DISABLE) || \ + ((__MODE__) == FSMC_WRAP_MODE_ENABLE)) + +#define IS_FSMC_WAIT_SIGNAL_ACTIVE(__ACTIVE__) (((__ACTIVE__) == FSMC_WAIT_TIMING_BEFORE_WS) || \ + ((__ACTIVE__) == FSMC_WAIT_TIMING_DURING_WS)) + +#define IS_FSMC_WRITE_OPERATION(__OPERATION__) (((__OPERATION__) == FSMC_WRITE_OPERATION_DISABLE) || \ + ((__OPERATION__) == FSMC_WRITE_OPERATION_ENABLE)) + +#define IS_FSMC_WAITE_SIGNAL(__SIGNAL__) (((__SIGNAL__) == FSMC_WAIT_SIGNAL_DISABLE) || \ + ((__SIGNAL__) == FSMC_WAIT_SIGNAL_ENABLE)) + +#define IS_FSMC_EXTENDED_MODE(__MODE__) (((__MODE__) == FSMC_EXTENDED_MODE_DISABLE) || \ + ((__MODE__) == FSMC_EXTENDED_MODE_ENABLE)) + +#define IS_FSMC_ASYNWAIT(__STATE__) (((__STATE__) == FSMC_ASYNCHRONOUS_WAIT_DISABLE) || \ + ((__STATE__) == FSMC_ASYNCHRONOUS_WAIT_ENABLE)) + +#define IS_FSMC_CLK_DIV(__DIV__) (((__DIV__) > 1) && ((__DIV__) <= 16)) + +/** @defgroup FSMC_Data_Latency FSMC Data Latency + * @{ + */ +#define IS_FSMC_DATA_LATENCY(__LATENCY__) (((__LATENCY__) > 1) && ((__LATENCY__) <= 17)) +/** + * @} + */ + +/** @defgroup FSMC_Address_Setup_Time FSMC Address Setup Time + * @{ + */ +#define IS_FSMC_ADDRESS_SETUP_TIME(__TIME__) ((__TIME__) <= 15) +/** + * @} + */ + +/** @defgroup FSMC_Address_Hold_Time FSMC Address Hold Time + * @{ + */ +#define IS_FSMC_ADDRESS_HOLD_TIME(__TIME__) (((__TIME__) > 0) && ((__TIME__) <= 15)) +/** + * @} + */ + +/** @defgroup FSMC_Data_Setup_Time FSMC Data Setup Time + * @{ + */ +#define IS_FSMC_DATASETUP_TIME(__TIME__) (((__TIME__) > 0) && ((__TIME__) <= 255)) +/** + * @} + */ + +/** @defgroup FSMC_Bus_Turn_around_Duration FSMC Bus Turn around Duration + * @{ + */ +#define IS_FSMC_TURNAROUND_TIME(__TIME__) ((__TIME__) <= 15) +/** + * @} + */ + +/** + * @} + */ + +/* Exported typedef ----------------------------------------------------------*/ + +/** @defgroup FSMC_NORSRAM_Exported_typedef FSMC Low Layer Exported Types + * @{ + */ + +#define FSMC_NORSRAM_TypeDef FSMC_Bank1_TypeDef +#define FSMC_NORSRAM_EXTENDED_TypeDef FSMC_Bank1E_TypeDef + +#define FSMC_NORSRAM_DEVICE FSMC_Bank1 +#define FSMC_NORSRAM_EXTENDED_DEVICE FSMC_Bank1E + +/** + * @brief FSMC_NORSRAM Configuration Structure definition + */ +typedef struct +{ + uint32_t NSBank; /*!< Specifies the NORSRAM memory device that will be used. + This parameter can be a value of @ref FSMC_NORSRAM_Bank */ + + uint32_t DataAddressMux; /*!< Specifies whether the address and data values are + multiplexed on the data bus or not. + This parameter can be a value of @ref FSMC_Data_Address_Bus_Multiplexing */ + + uint32_t MemoryType; /*!< Specifies the type of external memory attached to + the corresponding memory device. + This parameter can be a value of @ref FSMC_Memory_Type */ + + uint32_t MemoryDataWidth; /*!< Specifies the external memory device width. + This parameter can be a value of @ref FSMC_NORSRAM_Data_Width */ + + uint32_t BurstAccessMode; /*!< Enables or disables the burst access mode for Flash memory, + valid only with synchronous burst Flash memories. + This parameter can be a value of @ref FSMC_Burst_Access_Mode */ + + uint32_t WaitSignalPolarity; /*!< Specifies the wait signal polarity, valid only when accessing + the Flash memory in burst mode. + This parameter can be a value of @ref FSMC_Wait_Signal_Polarity */ + + uint32_t WrapMode; /*!< Enables or disables the Wrapped burst access mode for Flash + memory, valid only when accessing Flash memories in burst mode. + This parameter can be a value of @ref FSMC_Wrap_Mode */ + + uint32_t WaitSignalActive; /*!< Specifies if the wait signal is asserted by the memory one + clock cycle before the wait state or during the wait state, + valid only when accessing memories in burst mode. + This parameter can be a value of @ref FSMC_Wait_Timing */ + + uint32_t WriteOperation; /*!< Enables or disables the write operation in the selected device by the FSMC. + This parameter can be a value of @ref FSMC_Write_Operation */ + + uint32_t WaitSignal; /*!< Enables or disables the wait state insertion via wait + signal, valid for Flash memory access in burst mode. + This parameter can be a value of @ref FSMC_Wait_Signal */ + + uint32_t ExtendedMode; /*!< Enables or disables the extended mode. + This parameter can be a value of @ref FSMC_Extended_Mode */ + + uint32_t AsynchronousWait; /*!< Enables or disables wait signal during asynchronous transfers, + valid only with asynchronous Flash memories. + This parameter can be a value of @ref FSMC_AsynchronousWait */ + + uint32_t WriteBurst; /*!< Enables or disables the write burst operation. + This parameter can be a value of @ref FSMC_Write_Burst */ + +}FSMC_NORSRAM_InitTypeDef; + +/** + * @brief FSMC_NORSRAM Timing parameters structure definition + */ +typedef struct +{ + uint32_t AddressSetupTime; /*!< Defines the number of HCLK cycles to configure + the duration of the address setup time. + This parameter can be a value between Min_Data = 0 and Max_Data = 15. + @note This parameter is not used with synchronous NOR Flash memories. */ + + uint32_t AddressHoldTime; /*!< Defines the number of HCLK cycles to configure + the duration of the address hold time. + This parameter can be a value between Min_Data = 1 and Max_Data = 15. + @note This parameter is not used with synchronous NOR Flash memories. */ + + uint32_t DataSetupTime; /*!< Defines the number of HCLK cycles to configure + the duration of the data setup time. + This parameter can be a value between Min_Data = 1 and Max_Data = 255. + @note This parameter is used for SRAMs, ROMs and asynchronous multiplexed + NOR Flash memories. */ + + uint32_t BusTurnAroundDuration; /*!< Defines the number of HCLK cycles to configure + the duration of the bus turnaround. + This parameter can be a value between Min_Data = 0 and Max_Data = 15. + @note This parameter is only used for multiplexed NOR Flash memories. */ + + uint32_t CLKDivision; /*!< Defines the period of CLK clock output signal, expressed in number of + HCLK cycles. This parameter can be a value between Min_Data = 2 and Max_Data = 16. + @note This parameter is not used for asynchronous NOR Flash, SRAM or ROM + accesses. */ + + uint32_t DataLatency; /*!< Defines the number of memory clock cycles to issue + to the memory before getting the first data. + The parameter value depends on the memory type as shown below: + - It must be set to 0 in case of a CRAM + - It is don't care in asynchronous NOR, SRAM or ROM accesses + - It may assume a value between Min_Data = 2 and Max_Data = 17 in NOR Flash memories + with synchronous burst mode enable */ + + uint32_t AccessMode; /*!< Specifies the asynchronous access mode. + This parameter can be a value of @ref FSMC_Access_Mode */ + +}FSMC_NORSRAM_TimingTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup FSMC_Exported_Constants FSMC Low Layer Exported Constants + * @{ + */ + +/** @defgroup FSMC_NORSRAM_Exported_constants FSMC NOR/SRAM Exported constants + * @{ + */ + +/** @defgroup FSMC_NORSRAM_Bank FSMC NOR/SRAM Bank + * @{ + */ +#define FSMC_NORSRAM_BANK1 ((uint32_t)0x00000000) +#define FSMC_NORSRAM_BANK2 ((uint32_t)0x00000002) +#define FSMC_NORSRAM_BANK3 ((uint32_t)0x00000004) +#define FSMC_NORSRAM_BANK4 ((uint32_t)0x00000006) + +/** + * @} + */ + +/** @defgroup FSMC_Data_Address_Bus_Multiplexing FSMC Data Address Bus Multiplexing + * @{ + */ + +#define FSMC_DATA_ADDRESS_MUX_DISABLE ((uint32_t)0x00000000) +#define FSMC_DATA_ADDRESS_MUX_ENABLE ((uint32_t)FSMC_BCRx_MUXEN) + +/** + * @} + */ + +/** @defgroup FSMC_Memory_Type FSMC Memory Type + * @{ + */ + +#define FSMC_MEMORY_TYPE_SRAM ((uint32_t)0x00000000) +#define FSMC_MEMORY_TYPE_PSRAM ((uint32_t)FSMC_BCRx_MTYP_0) +#define FSMC_MEMORY_TYPE_NOR ((uint32_t)FSMC_BCRx_MTYP_1) + +/** + * @} + */ + +/** @defgroup FSMC_NORSRAM_Data_Width FSMC NOR/SRAM Data Width + * @{ + */ + +#define FSMC_NORSRAM_MEM_BUS_WIDTH_8 ((uint32_t)0x00000000) +#define FSMC_NORSRAM_MEM_BUS_WIDTH_16 ((uint32_t)FSMC_BCRx_MWID_0) +#define FSMC_NORSRAM_MEM_BUS_WIDTH_32 ((uint32_t)FSMC_BCRx_MWID_1) + +/** + * @} + */ + +/** @defgroup FSMC_NORSRAM_Flash_Access FSMC NOR/SRAM Flash Access + * @{ + */ + +#define FSMC_NORSRAM_FLASH_ACCESS_ENABLE ((uint32_t)FSMC_BCRx_FACCEN) +#define FSMC_NORSRAM_FLASH_ACCESS_DISABLE ((uint32_t)0x00000000) +/** + * @} + */ + +/** @defgroup FSMC_Burst_Access_Mode FSMC Burst Access Mode + * @{ + */ + +#define FSMC_BURST_ACCESS_MODE_DISABLE ((uint32_t)0x00000000) +#define FSMC_BURST_ACCESS_MODE_ENABLE ((uint32_t)FSMC_BCRx_BURSTEN) + +/** + * @} + */ + + +/** @defgroup FSMC_Wait_Signal_Polarity FSMC Wait Signal Polarity + * @{ + */ + +#define FSMC_WAIT_SIGNAL_POLARITY_LOW ((uint32_t)0x00000000) +#define FSMC_WAIT_SIGNAL_POLARITY_HIGH ((uint32_t)FSMC_BCRx_WAITPOL) + +/** + * @} + */ + +/** @defgroup FSMC_Wrap_Mode FSMC Wrap Mode + * @{ + */ + +#define FSMC_WRAP_MODE_DISABLE ((uint32_t)0x00000000) +#define FSMC_WRAP_MODE_ENABLE ((uint32_t)FSMC_BCRx_WRAPMOD) + +/** + * @} + */ + +/** @defgroup FSMC_Wait_Timing FSMC Wait Timing + * @{ + */ + +#define FSMC_WAIT_TIMING_BEFORE_WS ((uint32_t)0x00000000) +#define FSMC_WAIT_TIMING_DURING_WS ((uint32_t)FSMC_BCRx_WAITCFG) + +/** + * @} + */ + +/** @defgroup FSMC_Write_Operation FSMC Write Operation + * @{ + */ + +#define FSMC_WRITE_OPERATION_DISABLE ((uint32_t)0x00000000) +#define FSMC_WRITE_OPERATION_ENABLE ((uint32_t)FSMC_BCRx_WREN) + +/** + * @} + */ + +/** @defgroup FSMC_Wait_Signal FSMC Wait Signal + * @{ + */ + +#define FSMC_WAIT_SIGNAL_DISABLE ((uint32_t)0x00000000) +#define FSMC_WAIT_SIGNAL_ENABLE ((uint32_t)FSMC_BCRx_WAITEN) + +/** + * @} + */ + +/** @defgroup FSMC_Extended_Mode FSMC Extended Mode + * @{ + */ + +#define FSMC_EXTENDED_MODE_DISABLE ((uint32_t)0x00000000) +#define FSMC_EXTENDED_MODE_ENABLE ((uint32_t)FSMC_BCRx_EXTMOD) + +/** + * @} + */ + +/** @defgroup FSMC_AsynchronousWait FSMC Asynchronous Wait + * @{ + */ + +#define FSMC_ASYNCHRONOUS_WAIT_DISABLE ((uint32_t)0x00000000) +#define FSMC_ASYNCHRONOUS_WAIT_ENABLE ((uint32_t)FSMC_BCRx_ASYNCWAIT) + +/** + * @} + */ + +/** @defgroup FSMC_Write_Burst FSMC Write Burst + * @{ + */ + +#define FSMC_WRITE_BURST_DISABLE ((uint32_t)0x00000000) +#define FSMC_WRITE_BURST_ENABLE ((uint32_t)FSMC_BCRx_CBURSTRW) + +/** + * @} + */ + +/** @defgroup FSMC_Access_Mode FSMC Access Mode + * @{ + */ + +#define FSMC_ACCESS_MODE_A ((uint32_t)0x00000000) +#define FSMC_ACCESS_MODE_B ((uint32_t)FSMC_BTRx_ACCMOD_0) +#define FSMC_ACCESS_MODE_C ((uint32_t)FSMC_BTRx_ACCMOD_1) +#define FSMC_ACCESS_MODE_D ((uint32_t)(FSMC_BTRx_ACCMOD_0 | FSMC_BTRx_ACCMOD_1)) + +/** + * @} + */ + +/** + * @} + */ + + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ + +/** @defgroup FSMC_Exported_Macros FSMC Low Layer Exported Macros + * @{ + */ + +/** @defgroup FSMC_NOR_Macros FSMC NOR/SRAM Exported Macros + * @brief macros to handle NOR device enable/disable and read/write operations + * @{ + */ + +/** + * @brief Enable the NORSRAM device access. + * @param __INSTANCE__ FSMC_NORSRAM Instance + * @param __BANK__ FSMC_NORSRAM Bank + * @retval none + */ +#define __FSMC_NORSRAM_ENABLE(__INSTANCE__, __BANK__) SET_BIT((__INSTANCE__)->BTCR[(__BANK__)], FSMC_BCRx_MBKEN) + +/** + * @brief Disable the NORSRAM device access. + * @param __INSTANCE__ FSMC_NORSRAM Instance + * @param __BANK__ FSMC_NORSRAM Bank + * @retval none + */ +#define __FSMC_NORSRAM_DISABLE(__INSTANCE__, __BANK__) CLEAR_BIT((__INSTANCE__)->BTCR[(__BANK__)], FSMC_BCRx_MBKEN) + +/** + * @} + */ + + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup FSMC_LL_Exported_Functions + * @{ + */ + +/** @addtogroup FSMC_NORSRAM + * @{ + */ + +/** @addtogroup FSMC_NORSRAM_Group1 + * @{ + */ + +/* FSMC_NORSRAM Controller functions ******************************************/ +/* Initialization/de-initialization functions */ +HAL_StatusTypeDef FSMC_NORSRAM_Init(FSMC_NORSRAM_TypeDef *Device, FSMC_NORSRAM_InitTypeDef *Init); +HAL_StatusTypeDef FSMC_NORSRAM_Timing_Init(FSMC_NORSRAM_TypeDef *Device, FSMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank); +HAL_StatusTypeDef FSMC_NORSRAM_Extended_Timing_Init(FSMC_NORSRAM_EXTENDED_TypeDef *Device, FSMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank, uint32_t ExtendedMode); +HAL_StatusTypeDef FSMC_NORSRAM_DeInit(FSMC_NORSRAM_TypeDef *Device, FSMC_NORSRAM_EXTENDED_TypeDef *ExDevice, uint32_t Bank); + +/** + * @} + */ + +/** @addtogroup FSMC_NORSRAM_Group2 + * @{ + */ + +/* FSMC_NORSRAM Control functions */ +HAL_StatusTypeDef FSMC_NORSRAM_WriteOperation_Enable(FSMC_NORSRAM_TypeDef *Device, uint32_t Bank); +HAL_StatusTypeDef FSMC_NORSRAM_WriteOperation_Disable(FSMC_NORSRAM_TypeDef *Device, uint32_t Bank); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* FSMC_BANK1 */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32L1xx_LL_FSMC_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_ll_gpio.h b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_ll_gpio.h new file mode 100755 index 0000000..f2a23b6 --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_ll_gpio.h @@ -0,0 +1,1005 @@ +/** + ****************************************************************************** + * @file stm32l1xx_ll_gpio.h + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief Header file of GPIO LL module. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L1xx_LL_GPIO_H +#define __STM32L1xx_LL_GPIO_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx.h" + +/** @addtogroup STM32L1xx_LL_Driver + * @{ + */ + +#if defined (GPIOA) || defined (GPIOB) || defined (GPIOC) || defined (GPIOD) || defined (GPIOE) || defined (GPIOF) || defined (GPIOG) || defined (GPIOH) + +/** @defgroup GPIO_LL GPIO + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup GPIO_LL_Private_Macros GPIO Private Macros + * @{ + */ + +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup GPIO_LL_ES_INIT GPIO Exported Init structures + * @{ + */ + +/** + * @brief LL GPIO Init Structure definition + */ +typedef struct +{ + uint32_t Pin; /*!< Specifies the GPIO pins to be configured. + This parameter can be any value of @ref GPIO_LL_EC_PIN */ + + uint32_t Mode; /*!< Specifies the operating mode for the selected pins. + This parameter can be a value of @ref GPIO_LL_EC_MODE. + + GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinMode().*/ + + uint32_t Speed; /*!< Specifies the speed for the selected pins. + This parameter can be a value of @ref GPIO_LL_EC_SPEED. + + GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinSpeed().*/ + + uint32_t OutputType; /*!< Specifies the operating output type for the selected pins. + This parameter can be a value of @ref GPIO_LL_EC_OUTPUT. + + GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinOutputType().*/ + + uint32_t Pull; /*!< Specifies the operating Pull-up/Pull down for the selected pins. + This parameter can be a value of @ref GPIO_LL_EC_PULL. + + GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinPull().*/ + + uint32_t Alternate; /*!< Specifies the Peripheral to be connected to the selected pins. + This parameter can be a value of @ref GPIO_LL_EC_AF. + + GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetAFPin_0_7() and LL_GPIO_SetAFPin_8_15().*/ +} LL_GPIO_InitTypeDef; + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup GPIO_LL_Exported_Constants GPIO Exported Constants + * @{ + */ + +/** @defgroup GPIO_LL_EC_PIN PIN + * @{ + */ +#define LL_GPIO_PIN_0 GPIO_BSRR_BS_0 /*!< Select pin 0 */ +#define LL_GPIO_PIN_1 GPIO_BSRR_BS_1 /*!< Select pin 1 */ +#define LL_GPIO_PIN_2 GPIO_BSRR_BS_2 /*!< Select pin 2 */ +#define LL_GPIO_PIN_3 GPIO_BSRR_BS_3 /*!< Select pin 3 */ +#define LL_GPIO_PIN_4 GPIO_BSRR_BS_4 /*!< Select pin 4 */ +#define LL_GPIO_PIN_5 GPIO_BSRR_BS_5 /*!< Select pin 5 */ +#define LL_GPIO_PIN_6 GPIO_BSRR_BS_6 /*!< Select pin 6 */ +#define LL_GPIO_PIN_7 GPIO_BSRR_BS_7 /*!< Select pin 7 */ +#define LL_GPIO_PIN_8 GPIO_BSRR_BS_8 /*!< Select pin 8 */ +#define LL_GPIO_PIN_9 GPIO_BSRR_BS_9 /*!< Select pin 9 */ +#define LL_GPIO_PIN_10 GPIO_BSRR_BS_10 /*!< Select pin 10 */ +#define LL_GPIO_PIN_11 GPIO_BSRR_BS_11 /*!< Select pin 11 */ +#define LL_GPIO_PIN_12 GPIO_BSRR_BS_12 /*!< Select pin 12 */ +#define LL_GPIO_PIN_13 GPIO_BSRR_BS_13 /*!< Select pin 13 */ +#define LL_GPIO_PIN_14 GPIO_BSRR_BS_14 /*!< Select pin 14 */ +#define LL_GPIO_PIN_15 GPIO_BSRR_BS_15 /*!< Select pin 15 */ +#define LL_GPIO_PIN_ALL (GPIO_BSRR_BS_0 | GPIO_BSRR_BS_1 | GPIO_BSRR_BS_2 | \ + GPIO_BSRR_BS_3 | GPIO_BSRR_BS_4 | GPIO_BSRR_BS_5 | \ + GPIO_BSRR_BS_6 | GPIO_BSRR_BS_7 | GPIO_BSRR_BS_8 | \ + GPIO_BSRR_BS_9 | GPIO_BSRR_BS_10 | GPIO_BSRR_BS_11 | \ + GPIO_BSRR_BS_12 | GPIO_BSRR_BS_13 | GPIO_BSRR_BS_14 | \ + GPIO_BSRR_BS_15) /*!< Select all pins */ +/** + * @} + */ + +/** @defgroup GPIO_LL_EC_MODE Mode + * @{ + */ +#define LL_GPIO_MODE_INPUT ((uint32_t)0x00000000U) /*!< Select input mode */ +#define LL_GPIO_MODE_OUTPUT GPIO_MODER_MODER0_0 /*!< Select output mode */ +#define LL_GPIO_MODE_ALTERNATE GPIO_MODER_MODER0_1 /*!< Select alternate function mode */ +#define LL_GPIO_MODE_ANALOG GPIO_MODER_MODER0 /*!< Select analog mode */ +/** + * @} + */ + +/** @defgroup GPIO_LL_EC_OUTPUT Output Type + * @{ + */ +#define LL_GPIO_OUTPUT_PUSHPULL ((uint32_t)0x00000000U) /*!< Select push-pull as output type */ +#define LL_GPIO_OUTPUT_OPENDRAIN GPIO_OTYPER_OT_0 /*!< Select open-drain as output type */ +/** + * @} + */ + +/** @defgroup GPIO_LL_EC_SPEED Output Speed + * @{ + */ +#define LL_GPIO_SPEED_FREQ_LOW ((uint32_t)0x00000000U) /*!< Select I/O low output speed */ +#define LL_GPIO_SPEED_FREQ_MEDIUM GPIO_OSPEEDER_OSPEEDR0_0 /*!< Select I/O medium output speed */ +#define LL_GPIO_SPEED_FREQ_HIGH GPIO_OSPEEDER_OSPEEDR0_1 /*!< Select I/O fast output speed */ +#define LL_GPIO_SPEED_FREQ_VERY_HIGH GPIO_OSPEEDER_OSPEEDR0 /*!< Select I/O high output speed */ +/** + * @} + */ + +/** @defgroup GPIO_LL_EC_PULL Pull Up Pull Down + * @{ + */ +#define LL_GPIO_PULL_NO ((uint32_t)0x00000000U) /*!< Select I/O no pull */ +#define LL_GPIO_PULL_UP GPIO_PUPDR_PUPDR0_0 /*!< Select I/O pull up */ +#define LL_GPIO_PULL_DOWN GPIO_PUPDR_PUPDR0_1 /*!< Select I/O pull down */ +/** + * @} + */ + +/** @defgroup GPIO_LL_EC_AF Alternate Function + * @{ + */ +#define LL_GPIO_AF_0 ((uint32_t)0x0000000U) /*!< Select alternate function 0 */ +#define LL_GPIO_AF_1 ((uint32_t)0x0000001U) /*!< Select alternate function 1 */ +#define LL_GPIO_AF_2 ((uint32_t)0x0000002U) /*!< Select alternate function 2 */ +#define LL_GPIO_AF_3 ((uint32_t)0x0000003U) /*!< Select alternate function 3 */ +#define LL_GPIO_AF_4 ((uint32_t)0x0000004U) /*!< Select alternate function 4 */ +#define LL_GPIO_AF_5 ((uint32_t)0x0000005U) /*!< Select alternate function 5 */ +#define LL_GPIO_AF_6 ((uint32_t)0x0000006U) /*!< Select alternate function 6 */ +#define LL_GPIO_AF_7 ((uint32_t)0x0000007U) /*!< Select alternate function 7 */ +#define LL_GPIO_AF_8 ((uint32_t)0x0000008U) /*!< Select alternate function 8 */ +#define LL_GPIO_AF_9 ((uint32_t)0x0000009U) /*!< Select alternate function 9 */ +#define LL_GPIO_AF_10 ((uint32_t)0x000000AU) /*!< Select alternate function 10 */ +#define LL_GPIO_AF_11 ((uint32_t)0x000000BU) /*!< Select alternate function 11 */ +#define LL_GPIO_AF_12 ((uint32_t)0x000000CU) /*!< Select alternate function 12 */ +#define LL_GPIO_AF_13 ((uint32_t)0x000000DU) /*!< Select alternate function 13 */ +#define LL_GPIO_AF_14 ((uint32_t)0x000000EU) /*!< Select alternate function 14 */ +#define LL_GPIO_AF_15 ((uint32_t)0x000000FU) /*!< Select alternate function 15 */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup GPIO_LL_Exported_Macros GPIO Exported Macros + * @{ + */ + +/** @defgroup GPIO_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in GPIO register + * @param __INSTANCE__ GPIO Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_GPIO_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in GPIO register + * @param __INSTANCE__ GPIO Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_GPIO_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup GPIO_LL_Exported_Functions GPIO Exported Functions + * @{ + */ + +/** @defgroup GPIO_LL_EF_Port_Configuration Port Configuration + * @{ + */ + +/** + * @brief Configure gpio mode for a dedicated pin on dedicated port. + * @note I/O mode can be Input mode, General purpose output, Alternate function mode or Analog. + * @note Warning: only one pin can be passed as parameter. + * @rmtoll MODER MODEy LL_GPIO_SetPinMode + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @param Mode This parameter can be one of the following values: + * @arg @ref LL_GPIO_MODE_INPUT + * @arg @ref LL_GPIO_MODE_OUTPUT + * @arg @ref LL_GPIO_MODE_ALTERNATE + * @arg @ref LL_GPIO_MODE_ANALOG + * @retval None + */ +__STATIC_INLINE void LL_GPIO_SetPinMode(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Mode) +{ + MODIFY_REG(GPIOx->MODER, (GPIO_MODER_MODER0 << (POSITION_VAL(Pin) * 2U)), (Mode << (POSITION_VAL(Pin) * 2U))); +} + +/** + * @brief Return gpio mode for a dedicated pin on dedicated port. + * @note I/O mode can be Input mode, General purpose output, Alternate function mode or Analog. + * @note Warning: only one pin can be passed as parameter. + * @rmtoll MODER MODEy LL_GPIO_GetPinMode + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @retval Returned value can be one of the following values: + * @arg @ref LL_GPIO_MODE_INPUT + * @arg @ref LL_GPIO_MODE_OUTPUT + * @arg @ref LL_GPIO_MODE_ALTERNATE + * @arg @ref LL_GPIO_MODE_ANALOG + */ +__STATIC_INLINE uint32_t LL_GPIO_GetPinMode(GPIO_TypeDef *GPIOx, uint32_t Pin) +{ + return (uint32_t)(READ_BIT(GPIOx->MODER, + (GPIO_MODER_MODER0 << (POSITION_VAL(Pin) * 2U))) >> (POSITION_VAL(Pin) * 2U)); +} + +/** + * @brief Configure gpio output type for several pins on dedicated port. + * @note Output type as to be set when gpio pin is in output or + * alternate modes. Possible type are Push-pull or Open-drain. + * @rmtoll OTYPER OTy LL_GPIO_SetPinOutputType + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @param OutputType This parameter can be one of the following values: + * @arg @ref LL_GPIO_OUTPUT_PUSHPULL + * @arg @ref LL_GPIO_OUTPUT_OPENDRAIN + * @retval None + */ +__STATIC_INLINE void LL_GPIO_SetPinOutputType(GPIO_TypeDef *GPIOx, uint32_t PinMask, uint32_t OutputType) +{ + MODIFY_REG(GPIOx->OTYPER, PinMask, (PinMask * OutputType)); +} + +/** + * @brief Return gpio output type for several pins on dedicated port. + * @note Output type as to be set when gpio pin is in output or + * alternate modes. Possible type are Push-pull or Open-drain. + * @note Warning: only one pin can be passed as parameter. + * @rmtoll OTYPER OTy LL_GPIO_GetPinOutputType + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval Returned value can be one of the following values: + * @arg @ref LL_GPIO_OUTPUT_PUSHPULL + * @arg @ref LL_GPIO_OUTPUT_OPENDRAIN + */ +__STATIC_INLINE uint32_t LL_GPIO_GetPinOutputType(GPIO_TypeDef *GPIOx, uint32_t Pin) +{ + return (uint32_t)(READ_BIT(GPIOx->OTYPER, Pin) >> POSITION_VAL(Pin)); +} + +/** + * @brief Configure gpio speed for a dedicated pin on dedicated port. + * @note I/O speed can be Low, Medium, Fast or High speed. + * @note Warning: only one pin can be passed as parameter. + * @note Refer to datasheet for frequency specifications and the power + * supply and load conditions for each speed. + * @rmtoll OSPEEDR OSPEEDy LL_GPIO_SetPinSpeed + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @param Speed This parameter can be one of the following values: + * @arg @ref LL_GPIO_SPEED_FREQ_LOW + * @arg @ref LL_GPIO_SPEED_FREQ_MEDIUM + * @arg @ref LL_GPIO_SPEED_FREQ_HIGH + * @arg @ref LL_GPIO_SPEED_FREQ_VERY_HIGH + * @retval None + */ +__STATIC_INLINE void LL_GPIO_SetPinSpeed(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Speed) +{ + MODIFY_REG(GPIOx->OSPEEDR, (GPIO_OSPEEDER_OSPEEDR0 << (POSITION_VAL(Pin) * 2U)), + (Speed << (POSITION_VAL(Pin) * 2U))); +} + +/** + * @brief Return gpio speed for a dedicated pin on dedicated port. + * @note I/O speed can be Low, Medium, Fast or High speed. + * @note Warning: only one pin can be passed as parameter. + * @note Refer to datasheet for frequency specifications and the power + * supply and load conditions for each speed. + * @rmtoll OSPEEDR OSPEEDy LL_GPIO_GetPinSpeed + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @retval Returned value can be one of the following values: + * @arg @ref LL_GPIO_SPEED_FREQ_LOW + * @arg @ref LL_GPIO_SPEED_FREQ_MEDIUM + * @arg @ref LL_GPIO_SPEED_FREQ_HIGH + * @arg @ref LL_GPIO_SPEED_FREQ_VERY_HIGH + */ +__STATIC_INLINE uint32_t LL_GPIO_GetPinSpeed(GPIO_TypeDef *GPIOx, uint32_t Pin) +{ + return (uint32_t)(READ_BIT(GPIOx->OSPEEDR, + (GPIO_OSPEEDER_OSPEEDR0 << (POSITION_VAL(Pin) * 2U))) >> (POSITION_VAL(Pin) * 2U)); +} + +/** + * @brief Configure gpio pull-up or pull-down for a dedicated pin on a dedicated port. + * @note Warning: only one pin can be passed as parameter. + * @rmtoll PUPDR PUPDy LL_GPIO_SetPinPull + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @param Pull This parameter can be one of the following values: + * @arg @ref LL_GPIO_PULL_NO + * @arg @ref LL_GPIO_PULL_UP + * @arg @ref LL_GPIO_PULL_DOWN + * @retval None + */ +__STATIC_INLINE void LL_GPIO_SetPinPull(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Pull) +{ + MODIFY_REG(GPIOx->PUPDR, (GPIO_PUPDR_PUPDR0 << (POSITION_VAL(Pin) * 2U)), (Pull << (POSITION_VAL(Pin) * 2U))); +} + +/** + * @brief Return gpio pull-up or pull-down for a dedicated pin on a dedicated port + * @note Warning: only one pin can be passed as parameter. + * @rmtoll PUPDR PUPDy LL_GPIO_GetPinPull + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @retval Returned value can be one of the following values: + * @arg @ref LL_GPIO_PULL_NO + * @arg @ref LL_GPIO_PULL_UP + * @arg @ref LL_GPIO_PULL_DOWN + */ +__STATIC_INLINE uint32_t LL_GPIO_GetPinPull(GPIO_TypeDef *GPIOx, uint32_t Pin) +{ + return (uint32_t)(READ_BIT(GPIOx->PUPDR, + (GPIO_PUPDR_PUPDR0 << (POSITION_VAL(Pin) * 2U))) >> (POSITION_VAL(Pin) * 2U)); +} + +/** + * @brief Configure gpio alternate function of a dedicated pin from 0 to 7 for a dedicated port. + * @note Possible values are from AF0 to AF15 depending on target. + * @note Warning: only one pin can be passed as parameter. + * @rmtoll AFRL AFSELy LL_GPIO_SetAFPin_0_7 + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @param Alternate This parameter can be one of the following values: + * @arg @ref LL_GPIO_AF_0 + * @arg @ref LL_GPIO_AF_1 + * @arg @ref LL_GPIO_AF_2 + * @arg @ref LL_GPIO_AF_3 + * @arg @ref LL_GPIO_AF_4 + * @arg @ref LL_GPIO_AF_5 + * @arg @ref LL_GPIO_AF_6 + * @arg @ref LL_GPIO_AF_7 + * @arg @ref LL_GPIO_AF_8 + * @arg @ref LL_GPIO_AF_9 + * @arg @ref LL_GPIO_AF_10 + * @arg @ref LL_GPIO_AF_11 + * @arg @ref LL_GPIO_AF_12 + * @arg @ref LL_GPIO_AF_13 + * @arg @ref LL_GPIO_AF_14 + * @arg @ref LL_GPIO_AF_15 + * @retval None + */ +__STATIC_INLINE void LL_GPIO_SetAFPin_0_7(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Alternate) +{ + MODIFY_REG(GPIOx->AFR[0], (GPIO_AFRL_AFRL0 << (POSITION_VAL(Pin) * 4U)), + (Alternate << (POSITION_VAL(Pin) * 4U))); +} + +/** + * @brief Return gpio alternate function of a dedicated pin from 0 to 7 for a dedicated port. + * @rmtoll AFRL AFSELy LL_GPIO_GetAFPin_0_7 + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_GPIO_AF_0 + * @arg @ref LL_GPIO_AF_1 + * @arg @ref LL_GPIO_AF_2 + * @arg @ref LL_GPIO_AF_3 + * @arg @ref LL_GPIO_AF_4 + * @arg @ref LL_GPIO_AF_5 + * @arg @ref LL_GPIO_AF_6 + * @arg @ref LL_GPIO_AF_7 + * @arg @ref LL_GPIO_AF_8 + * @arg @ref LL_GPIO_AF_9 + * @arg @ref LL_GPIO_AF_10 + * @arg @ref LL_GPIO_AF_11 + * @arg @ref LL_GPIO_AF_12 + * @arg @ref LL_GPIO_AF_13 + * @arg @ref LL_GPIO_AF_14 + * @arg @ref LL_GPIO_AF_15 + */ +__STATIC_INLINE uint32_t LL_GPIO_GetAFPin_0_7(GPIO_TypeDef *GPIOx, uint32_t Pin) +{ + return (uint32_t)(READ_BIT(GPIOx->AFR[0], + (GPIO_AFRL_AFRL0 << (POSITION_VAL(Pin) * 4U))) >> (POSITION_VAL(Pin) * 4U)); +} + +/** + * @brief Configure gpio alternate function of a dedicated pin from 8 to 15 for a dedicated port. + * @note Possible values are from AF0 to AF15 depending on target. + * @note Warning: only one pin can be passed as parameter. + * @rmtoll AFRH AFSELy LL_GPIO_SetAFPin_8_15 + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @param Alternate This parameter can be one of the following values: + * @arg @ref LL_GPIO_AF_0 + * @arg @ref LL_GPIO_AF_1 + * @arg @ref LL_GPIO_AF_2 + * @arg @ref LL_GPIO_AF_3 + * @arg @ref LL_GPIO_AF_4 + * @arg @ref LL_GPIO_AF_5 + * @arg @ref LL_GPIO_AF_6 + * @arg @ref LL_GPIO_AF_7 + * @arg @ref LL_GPIO_AF_8 + * @arg @ref LL_GPIO_AF_9 + * @arg @ref LL_GPIO_AF_10 + * @arg @ref LL_GPIO_AF_11 + * @arg @ref LL_GPIO_AF_12 + * @arg @ref LL_GPIO_AF_13 + * @arg @ref LL_GPIO_AF_14 + * @arg @ref LL_GPIO_AF_15 + * @retval None + */ +__STATIC_INLINE void LL_GPIO_SetAFPin_8_15(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Alternate) +{ + MODIFY_REG(GPIOx->AFR[1], (GPIO_AFRH_AFRH0 << (POSITION_VAL(Pin >> 8U) * 4U)), + (Alternate << (POSITION_VAL(Pin >> 8U) * 4U))); +} + +/** + * @brief Return gpio alternate function of a dedicated pin from 8 to 15 for a dedicated port. + * @note Possible values are from AF0 to AF15 depending on target. + * @rmtoll AFRH AFSELy LL_GPIO_GetAFPin_8_15 + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @retval Returned value can be one of the following values: + * @arg @ref LL_GPIO_AF_0 + * @arg @ref LL_GPIO_AF_1 + * @arg @ref LL_GPIO_AF_2 + * @arg @ref LL_GPIO_AF_3 + * @arg @ref LL_GPIO_AF_4 + * @arg @ref LL_GPIO_AF_5 + * @arg @ref LL_GPIO_AF_6 + * @arg @ref LL_GPIO_AF_7 + * @arg @ref LL_GPIO_AF_8 + * @arg @ref LL_GPIO_AF_9 + * @arg @ref LL_GPIO_AF_10 + * @arg @ref LL_GPIO_AF_11 + * @arg @ref LL_GPIO_AF_12 + * @arg @ref LL_GPIO_AF_13 + * @arg @ref LL_GPIO_AF_14 + * @arg @ref LL_GPIO_AF_15 + */ +__STATIC_INLINE uint32_t LL_GPIO_GetAFPin_8_15(GPIO_TypeDef *GPIOx, uint32_t Pin) +{ + return (uint32_t)(READ_BIT(GPIOx->AFR[1], + (GPIO_AFRH_AFRH0 << (POSITION_VAL(Pin >> 8U) * 4U))) >> (POSITION_VAL(Pin >> 8U) * 4U)); +} + + +/** + * @brief Lock configuration of several pins for a dedicated port. + * @note When the lock sequence has been applied on a port bit, the + * value of this port bit can no longer be modified until the + * next reset. + * @note Each lock bit freezes a specific configuration register + * (control and alternate function registers). + * @rmtoll LCKR LCKK LL_GPIO_LockPin + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval None + */ +__STATIC_INLINE void LL_GPIO_LockPin(GPIO_TypeDef *GPIOx, uint32_t PinMask) +{ + __IO uint32_t temp; + WRITE_REG(GPIOx->LCKR, GPIO_LCKR_LCKK | PinMask); + WRITE_REG(GPIOx->LCKR, PinMask); + WRITE_REG(GPIOx->LCKR, GPIO_LCKR_LCKK | PinMask); + temp = READ_REG(GPIOx->LCKR); + (void) temp; +} + +/** + * @brief Return 1 if all pins passed as parameter, of a dedicated port, are locked. else Return 0. + * @rmtoll LCKR LCKy LL_GPIO_IsPinLocked + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_GPIO_IsPinLocked(GPIO_TypeDef *GPIOx, uint32_t PinMask) +{ + return (READ_BIT(GPIOx->LCKR, PinMask) == (PinMask)); +} + +/** + * @brief Return 1 if one of the pin of a dedicated port is locked. else return 0. + * @rmtoll LCKR LCKK LL_GPIO_IsAnyPinLocked + * @param GPIOx GPIO Port + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_GPIO_IsAnyPinLocked(GPIO_TypeDef *GPIOx) +{ + return (READ_BIT(GPIOx->LCKR, GPIO_LCKR_LCKK) == (GPIO_LCKR_LCKK)); +} + +/** + * @} + */ + +/** @defgroup GPIO_LL_EF_Data_Access Data Access + * @{ + */ + +/** + * @brief Return full input data register value for a dedicated port. + * @rmtoll IDR IDy LL_GPIO_ReadInputPort + * @param GPIOx GPIO Port + * @retval Input data register value of port + */ +__STATIC_INLINE uint32_t LL_GPIO_ReadInputPort(GPIO_TypeDef *GPIOx) +{ + return (uint32_t)(READ_REG(GPIOx->IDR)); +} + +/** + * @brief Return if input data level for several pins of dedicated port is high or low. + * @rmtoll IDR IDy LL_GPIO_IsInputPinSet + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_GPIO_IsInputPinSet(GPIO_TypeDef *GPIOx, uint32_t PinMask) +{ + return (READ_BIT(GPIOx->IDR, PinMask) == (PinMask)); +} + +/** + * @brief Write output data register for the port. + * @rmtoll ODR ODy LL_GPIO_WriteOutputPort + * @param GPIOx GPIO Port + * @param PortValue Level value for each pin of the port + * @retval None + */ +__STATIC_INLINE void LL_GPIO_WriteOutputPort(GPIO_TypeDef *GPIOx, uint32_t PortValue) +{ + WRITE_REG(GPIOx->ODR, PortValue); +} + +/** + * @brief Return full output data register value for a dedicated port. + * @rmtoll ODR ODy LL_GPIO_ReadOutputPort + * @param GPIOx GPIO Port + * @retval Output data register value of port + */ +__STATIC_INLINE uint32_t LL_GPIO_ReadOutputPort(GPIO_TypeDef *GPIOx) +{ + return (uint32_t)(READ_REG(GPIOx->ODR)); +} + +/** + * @brief Return if input data level for several pins of dedicated port is high or low. + * @rmtoll ODR ODy LL_GPIO_IsOutputPinSet + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_GPIO_IsOutputPinSet(GPIO_TypeDef *GPIOx, uint32_t PinMask) +{ + return (READ_BIT(GPIOx->ODR, PinMask) == (PinMask)); +} + +/** + * @brief Set several pins to high level on dedicated gpio port. + * @rmtoll BSRR BSy LL_GPIO_SetOutputPin + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval None + */ +__STATIC_INLINE void LL_GPIO_SetOutputPin(GPIO_TypeDef *GPIOx, uint32_t PinMask) +{ + WRITE_REG(GPIOx->BSRR, PinMask); +} + +/** + * @brief Set several pins to low level on dedicated gpio port. + * @rmtoll BRR BRy LL_GPIO_ResetOutputPin\n + * @rmtoll BSRR BRy LL_GPIO_ResetOutputPin + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval None + */ +__STATIC_INLINE void LL_GPIO_ResetOutputPin(GPIO_TypeDef *GPIOx, uint32_t PinMask) +{ +#if defined(GPIO_BRR_BR_0) + WRITE_REG(GPIOx->BRR, PinMask); +#else + WRITE_REG(GPIOx->BSRR, (PinMask << 16)); +#endif /* GPIO_BRR_BR_0 */ +} + +/** + * @brief Toggle data value for several pin of dedicated port. + * @rmtoll ODR ODy LL_GPIO_TogglePin + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval None + */ +__STATIC_INLINE void LL_GPIO_TogglePin(GPIO_TypeDef *GPIOx, uint32_t PinMask) +{ + WRITE_REG(GPIOx->ODR, READ_REG(GPIOx->ODR) ^ PinMask); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup GPIO_LL_EF_Init Initialization and de-initialization functions + * @{ + */ + +ErrorStatus LL_GPIO_DeInit(GPIO_TypeDef *GPIOx); +ErrorStatus LL_GPIO_Init(GPIO_TypeDef *GPIOx, LL_GPIO_InitTypeDef *GPIO_InitStruct); +void LL_GPIO_StructInit(LL_GPIO_InitTypeDef *GPIO_InitStruct); + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined (GPIOA) || defined (GPIOB) || defined (GPIOC) || defined (GPIOD) || defined (GPIOE) || defined (GPIOF) || defined (GPIOG) || defined (GPIOH) */ +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32L1xx_LL_GPIO_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_ll_i2c.h b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_ll_i2c.h new file mode 100755 index 0000000..fad18f6 --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_ll_i2c.h @@ -0,0 +1,1793 @@ +/** + ****************************************************************************** + * @file stm32l1xx_ll_i2c.h + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief Header file of I2C LL module. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L1xx_LL_I2C_H +#define __STM32L1xx_LL_I2C_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx.h" + +/** @addtogroup STM32L1xx_LL_Driver + * @{ + */ + +#if defined (I2C1) || defined (I2C2) + +/** @defgroup I2C_LL I2C + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup I2C_LL_Private_Constants I2C Private Constants + * @{ + */ +/* Defines used for the bit position in the register and perform offsets */ +#define LL_I2C_POSITION_SR2_PEC (uint32_t)POSITION_VAL(I2C_SR2_PEC) + +/* Defines used to perform compute and check in the macros */ +#define LL_I2C_MAX_SPEED_STANDARD 100000U +#define LL_I2C_MAX_SPEED_FAST 400000U +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup I2C_LL_Private_Macros I2C Private Macros + * @{ + */ +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup I2C_LL_ES_INIT I2C Exported Init structure + * @{ + */ +typedef struct +{ + uint32_t PeripheralMode; /*!< Specifies the peripheral mode. + This parameter can be a value of @ref I2C_LL_EC_PERIPHERAL_MODE + + This feature can be modified afterwards using unitary function @ref LL_I2C_SetMode(). */ + + uint32_t ClockSpeed; /*!< Specifies the clock frequency. + This parameter must be set to a value lower than 400kHz (in Hz) + + This feature can be modified afterwards using unitary function @ref LL_I2C_SetClockPeriod() + or @ref LL_I2C_SetDutyCycle() or @ref LL_I2C_SetClockSpeedMode() or @ref LL_I2C_ConfigSpeed(). */ + + uint32_t DutyCycle; /*!< Specifies the I2C fast mode duty cycle. + This parameter can be a value of @ref I2C_LL_EC_DUTYCYCLE + + This feature can be modified afterwards using unitary function @ref LL_I2C_SetDutyCycle(). */ + + uint32_t OwnAddress1; /*!< Specifies the device own address 1. + This parameter must be a value between Min_Data = 0x00 and Max_Data = 0x3FF + + This feature can be modified afterwards using unitary function @ref LL_I2C_SetOwnAddress1(). */ + + uint32_t TypeAcknowledge; /*!< Specifies the ACKnowledge or Non ACKnowledge condition after the address receive match code or next received byte. + This parameter can be a value of @ref I2C_LL_EC_I2C_ACKNOWLEDGE + + This feature can be modified afterwards using unitary function @ref LL_I2C_AcknowledgeNextData(). */ + + uint32_t OwnAddrSize; /*!< Specifies the device own address 1 size (7-bit or 10-bit). + This parameter can be a value of @ref I2C_LL_EC_OWNADDRESS1 + + This feature can be modified afterwards using unitary function @ref LL_I2C_SetOwnAddress1(). */ +} LL_I2C_InitTypeDef; +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup I2C_LL_Exported_Constants I2C Exported Constants + * @{ + */ + +/** @defgroup I2C_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_I2C_ReadReg function + * @{ + */ +#define LL_I2C_SR1_SB I2C_SR1_SB /*!< Start Bit (master mode) */ +#define LL_I2C_SR1_ADDR I2C_SR1_ADDR /*!< Address sent (master mode) or + Address matched flag (slave mode) */ +#define LL_I2C_SR1_BTF I2C_SR1_BTF /*!< Byte Transfer Finished flag */ +#define LL_I2C_SR1_ADD10 I2C_SR1_ADD10 /*!< 10-bit header sent (master mode) */ +#define LL_I2C_SR1_STOPF I2C_SR1_STOPF /*!< Stop detection flag (slave mode) */ +#define LL_I2C_SR1_RXNE I2C_SR1_RXNE /*!< Data register not empty (receivers) */ +#define LL_I2C_SR1_TXE I2C_SR1_TXE /*!< Data register empty (transmitters) */ +#define LL_I2C_SR1_BERR I2C_SR1_BERR /*!< Bus error */ +#define LL_I2C_SR1_ARLO I2C_SR1_ARLO /*!< Arbitration lost */ +#define LL_I2C_SR1_AF I2C_SR1_AF /*!< Acknowledge failure flag */ +#define LL_I2C_SR1_OVR I2C_SR1_OVR /*!< Overrun/Underrun */ +#define LL_I2C_SR1_PECERR I2C_ISR_PECERR /*!< PEC Error in reception (SMBus mode) */ +#define LL_I2C_SR1_TIMEOUT I2C_ISR_TIMEOUT /*!< Timeout detection flag (SMBus mode) */ +#define LL_I2C_SR1_SMALERT I2C_ISR_SMALERT /*!< SMBus alert (SMBus mode) */ +#define LL_I2C_SR2_MSL I2C_SR2_MSL /*!< Master/Slave flag */ +#define LL_I2C_SR2_BUSY I2C_SR2_BUSY /*!< Bus busy flag */ +#define LL_I2C_SR2_TRA I2C_SR2_TRA /*!< Transmitter/receiver direction */ +#define LL_I2C_SR2_GENCALL I2C_SR2_GENCALL /*!< General call address (Slave mode) */ +#define LL_I2C_SR2_SMBDEFAULT I2C_SR2_SMBDEFAULT /*!< SMBus Device default address (Slave mode) */ +#define LL_I2C_SR2_SMBHOST I2C_SR2_SMBHOST /*!< SMBus Host address (Slave mode) */ +#define LL_I2C_SR2_DUALF I2C_SR2_DUALF /*!< Dual flag (Slave mode) */ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_I2C_ReadReg and LL_I2C_WriteReg functions + * @{ + */ +#define LL_I2C_CR2_ITEVTEN I2C_CR2_ITEVTEN /*!< Events interrupts enable */ +#define LL_I2C_CR2_ITBUFEN I2C_CR2_ITBUFEN /*!< Buffer interrupts enable */ +#define LL_I2C_CR2_ITERREN I2C_CR2_ITERREN /*!< Error interrupts enable */ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_OWNADDRESS1 Own Address 1 Length + * @{ + */ +#define LL_I2C_OWNADDRESS1_7BIT 0x00004000U /*!< Own address 1 is a 7-bit address. */ +#define LL_I2C_OWNADDRESS1_10BIT (uint32_t)(I2C_OAR1_ADDMODE | 0x00004000U) /*!< Own address 1 is a 10-bit address. */ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_DUTYCYCLE Fast Mode Duty Cycle + * @{ + */ +#define LL_I2C_DUTYCYCLE_2 0x00000000U /*!< I2C fast mode Tlow/Thigh = 2 */ +#define LL_I2C_DUTYCYCLE_16_9 I2C_CCR_DUTY /*!< I2C fast mode Tlow/Thigh = 16/9 */ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_CLOCK_SPEED_MODE Master Clock Speed Mode + * @{ + */ +#define LL_I2C_CLOCK_SPEED_STANDARD_MODE 0x00000000U /*!< Master clock speed range is standard mode */ +#define LL_I2C_CLOCK_SPEED_FAST_MODE I2C_CCR_FS /*!< Master clock speed range is fast mode */ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_PERIPHERAL_MODE Peripheral Mode + * @{ + */ +#define LL_I2C_MODE_I2C 0x00000000U /*!< I2C Master or Slave mode */ +#define LL_I2C_MODE_SMBUS_HOST (uint32_t)(I2C_CR1_SMBUS | I2C_CR1_SMBTYPE | I2C_CR1_ENARP) /*!< SMBus Host address acknowledge */ +#define LL_I2C_MODE_SMBUS_DEVICE I2C_CR1_SMBUS /*!< SMBus Device default mode (Default address not acknowledge) */ +#define LL_I2C_MODE_SMBUS_DEVICE_ARP (uint32_t)(I2C_CR1_SMBUS | I2C_CR1_ENARP) /*!< SMBus Device Default address acknowledge */ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_I2C_ACKNOWLEDGE Acknowledge Generation + * @{ + */ +#define LL_I2C_ACK I2C_CR1_ACK /*!< ACK is sent after current received byte. */ +#define LL_I2C_NACK 0x00000000U /*!< NACK is sent after current received byte.*/ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_DIRECTION Read Write Direction + * @{ + */ +#define LL_I2C_DIRECTION_WRITE I2C_SR2_TRA /*!< Bus is in write transfer */ +#define LL_I2C_DIRECTION_READ 0x00000000U /*!< Bus is in read transfer */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup I2C_LL_Exported_Macros I2C Exported Macros + * @{ + */ + +/** @defgroup I2C_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in I2C register + * @param __INSTANCE__ I2C Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_I2C_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in I2C register + * @param __INSTANCE__ I2C Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_I2C_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** @defgroup I2C_LL_EM_Exported_Macros_Helper Exported_Macros_Helper + * @{ + */ + +/** + * @brief Convert Peripheral Clock Frequency in Mhz. + * @param __PCLK__ This parameter must be a value of peripheral clock (in Hz). + * @retval Value of peripheral clock (in Mhz) + */ +#define __LL_I2C_FREQ_HZ_TO_MHZ(__PCLK__) (uint32_t)((__PCLK__)/1000000U) + +/** + * @brief Convert Peripheral Clock Frequency in Hz. + * @param __PCLK__ This parameter must be a value of peripheral clock (in Mhz). + * @retval Value of peripheral clock (in Hz) + */ +#define __LL_I2C_FREQ_MHZ_TO_HZ(__PCLK__) (uint32_t)((__PCLK__)*1000000U) + +/** + * @brief Compute I2C Clock rising time. + * @param __FREQRANGE__ This parameter must be a value of peripheral clock (in Mhz). + * @param __SPEED__ This parameter must be a value lower than 400kHz (in Hz). + * @retval Value between Min_Data=0x02 and Max_Data=0x3F + */ +#define __LL_I2C_RISE_TIME(__FREQRANGE__, __SPEED__) (uint32_t)(((__SPEED__) <= LL_I2C_MAX_SPEED_STANDARD) ? ((__FREQRANGE__) + 1U) : ((((__FREQRANGE__) * 300U) / 1000U) + 1U)) + +/** + * @brief Compute Speed clock range to a Clock Control Register (I2C_CCR_CCR) value. + * @param __PCLK__ This parameter must be a value of peripheral clock (in Hz). + * @param __SPEED__ This parameter must be a value lower than 400kHz (in Hz). + * @param __DUTYCYCLE__ This parameter can be one of the following values: + * @arg @ref LL_I2C_DUTYCYCLE_2 + * @arg @ref LL_I2C_DUTYCYCLE_16_9 + * @retval Value between Min_Data=0x004 and Max_Data=0xFFF, except in FAST DUTY mode where Min_Data=0x001. + */ +#define __LL_I2C_SPEED_TO_CCR(__PCLK__, __SPEED__, __DUTYCYCLE__) (uint32_t)(((__SPEED__) <= LL_I2C_MAX_SPEED_STANDARD)? \ + (__LL_I2C_SPEED_STANDARD_TO_CCR((__PCLK__), (__SPEED__))) : \ + (__LL_I2C_SPEED_FAST_TO_CCR((__PCLK__), (__SPEED__), (__DUTYCYCLE__)))) + +/** + * @brief Compute Speed Standard clock range to a Clock Control Register (I2C_CCR_CCR) value. + * @param __PCLK__ This parameter must be a value of peripheral clock (in Hz). + * @param __SPEED__ This parameter must be a value lower than 100kHz (in Hz). + * @retval Value between Min_Data=0x004 and Max_Data=0xFFF. + */ +#define __LL_I2C_SPEED_STANDARD_TO_CCR(__PCLK__, __SPEED__) (uint32_t)(((((__PCLK__)/((__SPEED__) << 1U)) & I2C_CCR_CCR) < 4U)? 4U:((__PCLK__) / ((__SPEED__) << 1U))) + +/** + * @brief Compute Speed Fast clock range to a Clock Control Register (I2C_CCR_CCR) value. + * @param __PCLK__ This parameter must be a value of peripheral clock (in Hz). + * @param __SPEED__ This parameter must be a value between Min_Data=100Khz and Max_Data=400Khz (in Hz). + * @param __DUTYCYCLE__ This parameter can be one of the following values: + * @arg @ref LL_I2C_DUTYCYCLE_2 + * @arg @ref LL_I2C_DUTYCYCLE_16_9 + * @retval Value between Min_Data=0x001 and Max_Data=0xFFF + */ +#define __LL_I2C_SPEED_FAST_TO_CCR(__PCLK__, __SPEED__, __DUTYCYCLE__) (uint32_t)(((__DUTYCYCLE__) == LL_I2C_DUTYCYCLE_2)? \ + (((((__PCLK__) / ((__SPEED__) * 3U)) & I2C_CCR_CCR) == 0U)? 1U:((__PCLK__) / ((__SPEED__) * 3U))) : \ + (((((__PCLK__) / ((__SPEED__) * 25U)) & I2C_CCR_CCR) == 0U)? 1U:((__PCLK__) / ((__SPEED__) * 25U)))) + +/** + * @brief Get the Least significant bits of a 10-Bits address. + * @param __ADDRESS__ This parameter must be a value of a 10-Bits slave address. + * @retval Value between Min_Data=0x00 and Max_Data=0xFF + */ +#define __LL_I2C_10BIT_ADDRESS(__ADDRESS__) ((uint8_t)((uint16_t)((__ADDRESS__) & (uint16_t)(0x00FF)))) + +/** + * @brief Convert a 10-Bits address to a 10-Bits header with Write direction. + * @param __ADDRESS__ This parameter must be a value of a 10-Bits slave address. + * @retval Value between Min_Data=0xF0 and Max_Data=0xF6 + */ +#define __LL_I2C_10BIT_HEADER_WRITE(__ADDRESS__) ((uint8_t)((uint16_t)((uint16_t)(((uint16_t)((__ADDRESS__) & (uint16_t)(0x0300))) >> 7) | (uint16_t)(0xF0)))) + +/** + * @brief Convert a 10-Bits address to a 10-Bits header with Read direction. + * @param __ADDRESS__ This parameter must be a value of a 10-Bits slave address. + * @retval Value between Min_Data=0xF1 and Max_Data=0xF7 + */ +#define __LL_I2C_10BIT_HEADER_READ(__ADDRESS__) ((uint8_t)((uint16_t)((uint16_t)(((uint16_t)((__ADDRESS__) & (uint16_t)(0x0300))) >> 7) | (uint16_t)(0xF1)))) + +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup I2C_LL_Exported_Functions I2C Exported Functions + * @{ + */ + +/** @defgroup I2C_LL_EF_Configuration Configuration + * @{ + */ + +/** + * @brief Enable I2C peripheral (PE = 1). + * @rmtoll CR1 PE LL_I2C_Enable + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_Enable(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_PE); +} + +/** + * @brief Disable I2C peripheral (PE = 0). + * @rmtoll CR1 PE LL_I2C_Disable + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_Disable(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_PE); +} + +/** + * @brief Check if the I2C peripheral is enabled or disabled. + * @rmtoll CR1 PE LL_I2C_IsEnabled + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabled(I2C_TypeDef *I2Cx) +{ + return (READ_BIT(I2Cx->CR1, I2C_CR1_PE) == (I2C_CR1_PE)); +} + + +/** + * @brief Enable DMA transmission requests. + * @rmtoll CR2 DMAEN LL_I2C_EnableDMAReq_TX + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableDMAReq_TX(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR2, I2C_CR2_DMAEN); +} + +/** + * @brief Disable DMA transmission requests. + * @rmtoll CR2 DMAEN LL_I2C_DisableDMAReq_TX + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableDMAReq_TX(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR2, I2C_CR2_DMAEN); +} + +/** + * @brief Check if DMA transmission requests are enabled or disabled. + * @rmtoll CR2 DMAEN LL_I2C_IsEnabledDMAReq_TX + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledDMAReq_TX(I2C_TypeDef *I2Cx) +{ + return (READ_BIT(I2Cx->CR2, I2C_CR2_DMAEN) == (I2C_CR2_DMAEN)); +} + +/** + * @brief Enable DMA reception requests. + * @rmtoll CR2 DMAEN LL_I2C_EnableDMAReq_RX + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableDMAReq_RX(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR2, I2C_CR2_DMAEN); +} + +/** + * @brief Disable DMA reception requests. + * @rmtoll CR2 DMAEN LL_I2C_DisableDMAReq_RX + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableDMAReq_RX(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR2, I2C_CR2_DMAEN); +} + +/** + * @brief Check if DMA reception requests are enabled or disabled. + * @rmtoll CR2 DMAEN LL_I2C_IsEnabledDMAReq_RX + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledDMAReq_RX(I2C_TypeDef *I2Cx) +{ + return (READ_BIT(I2Cx->CR2, I2C_CR2_DMAEN) == (I2C_CR2_DMAEN)); +} + +/** + * @brief Get the data register address used for DMA transfer. + * @rmtoll DR DR LL_I2C_DMA_GetRegAddr + * @param I2Cx I2C Instance. + * @retval Address of data register + */ +__STATIC_INLINE uint32_t LL_I2C_DMA_GetRegAddr(I2C_TypeDef *I2Cx) +{ + return (uint32_t) & (I2Cx->DR); +} + +/** + * @brief Enable Clock stretching. + * @note This bit can only be programmed when the I2C is disabled (PE = 0). + * @rmtoll CR1 NOSTRETCH LL_I2C_EnableClockStretching + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableClockStretching(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_NOSTRETCH); +} + +/** + * @brief Disable Clock stretching. + * @note This bit can only be programmed when the I2C is disabled (PE = 0). + * @rmtoll CR1 NOSTRETCH LL_I2C_DisableClockStretching + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableClockStretching(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_NOSTRETCH); +} + +/** + * @brief Check if Clock stretching is enabled or disabled. + * @rmtoll CR1 NOSTRETCH LL_I2C_IsEnabledClockStretching + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledClockStretching(I2C_TypeDef *I2Cx) +{ + return (READ_BIT(I2Cx->CR1, I2C_CR1_NOSTRETCH) != (I2C_CR1_NOSTRETCH)); +} + +/** + * @brief Enable General Call. + * @note When enabled the Address 0x00 is ACKed. + * @rmtoll CR1 ENGC LL_I2C_EnableGeneralCall + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableGeneralCall(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_ENGC); +} + +/** + * @brief Disable General Call. + * @note When disabled the Address 0x00 is NACKed. + * @rmtoll CR1 ENGC LL_I2C_DisableGeneralCall + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableGeneralCall(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_ENGC); +} + +/** + * @brief Check if General Call is enabled or disabled. + * @rmtoll CR1 ENGC LL_I2C_IsEnabledGeneralCall + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledGeneralCall(I2C_TypeDef *I2Cx) +{ + return (READ_BIT(I2Cx->CR1, I2C_CR1_ENGC) == (I2C_CR1_ENGC)); +} + +/** + * @brief Set the Own Address1. + * @rmtoll OAR1 ADD0 LL_I2C_SetOwnAddress1\n + * OAR1 ADD1_7 LL_I2C_SetOwnAddress1\n + * OAR1 ADD8_9 LL_I2C_SetOwnAddress1\n + * OAR1 ADDMODE LL_I2C_SetOwnAddress1 + * @param I2Cx I2C Instance. + * @param OwnAddress1 This parameter must be a value between Min_Data=0 and Max_Data=0x3FF. + * @param OwnAddrSize This parameter can be one of the following values: + * @arg @ref LL_I2C_OWNADDRESS1_7BIT + * @arg @ref LL_I2C_OWNADDRESS1_10BIT + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetOwnAddress1(I2C_TypeDef *I2Cx, uint32_t OwnAddress1, uint32_t OwnAddrSize) +{ + MODIFY_REG(I2Cx->OAR1, I2C_OAR1_ADD0 | I2C_OAR1_ADD1_7 | I2C_OAR1_ADD8_9 | I2C_OAR1_ADDMODE, OwnAddress1 | OwnAddrSize); +} + +/** + * @brief Set the 7bits Own Address2. + * @note This action has no effect if own address2 is enabled. + * @rmtoll OAR2 ADD2 LL_I2C_SetOwnAddress2 + * @param I2Cx I2C Instance. + * @param OwnAddress2 This parameter must be a value between Min_Data=0 and Max_Data=0x7F. + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetOwnAddress2(I2C_TypeDef *I2Cx, uint32_t OwnAddress2) +{ + MODIFY_REG(I2Cx->OAR2, I2C_OAR2_ADD2, OwnAddress2); +} + +/** + * @brief Enable acknowledge on Own Address2 match address. + * @rmtoll OAR2 ENDUAL LL_I2C_EnableOwnAddress2 + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableOwnAddress2(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->OAR2, I2C_OAR2_ENDUAL); +} + +/** + * @brief Disable acknowledge on Own Address2 match address. + * @rmtoll OAR2 ENDUAL LL_I2C_DisableOwnAddress2 + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableOwnAddress2(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->OAR2, I2C_OAR2_ENDUAL); +} + +/** + * @brief Check if Own Address1 acknowledge is enabled or disabled. + * @rmtoll OAR2 ENDUAL LL_I2C_IsEnabledOwnAddress2 + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledOwnAddress2(I2C_TypeDef *I2Cx) +{ + return (READ_BIT(I2Cx->OAR2, I2C_OAR2_ENDUAL) == (I2C_OAR2_ENDUAL)); +} + +/** + * @brief Configure the Peripheral clock frequency. + * @rmtoll CR2 FREQ LL_I2C_SetPeriphClock + * @param I2Cx I2C Instance. + * @param PeriphClock Peripheral Clock (in Hz) + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetPeriphClock(I2C_TypeDef *I2Cx, uint32_t PeriphClock) +{ + MODIFY_REG(I2Cx->CR2, I2C_CR2_FREQ, __LL_I2C_FREQ_HZ_TO_MHZ(PeriphClock)); +} + +/** + * @brief Get the Peripheral clock frequency. + * @rmtoll CR2 FREQ LL_I2C_GetPeriphClock + * @param I2Cx I2C Instance. + * @retval Value of Peripheral Clock (in Hz) + */ +__STATIC_INLINE uint32_t LL_I2C_GetPeriphClock(I2C_TypeDef *I2Cx) +{ + return (uint32_t)(__LL_I2C_FREQ_MHZ_TO_HZ(READ_BIT(I2Cx->CR2, I2C_CR2_FREQ))); +} + +/** + * @brief Configure the Duty cycle (Fast mode only). + * @rmtoll CCR DUTY LL_I2C_SetDutyCycle + * @param I2Cx I2C Instance. + * @param DutyCycle This parameter can be one of the following values: + * @arg @ref LL_I2C_DUTYCYCLE_2 + * @arg @ref LL_I2C_DUTYCYCLE_16_9 + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetDutyCycle(I2C_TypeDef *I2Cx, uint32_t DutyCycle) +{ + MODIFY_REG(I2Cx->CCR, I2C_CCR_DUTY, DutyCycle); +} + +/** + * @brief Get the Duty cycle (Fast mode only). + * @rmtoll CCR DUTY LL_I2C_GetDutyCycle + * @param I2Cx I2C Instance. + * @retval Returned value can be one of the following values: + * @arg @ref LL_I2C_DUTYCYCLE_2 + * @arg @ref LL_I2C_DUTYCYCLE_16_9 + */ +__STATIC_INLINE uint32_t LL_I2C_GetDutyCycle(I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->CCR, I2C_CCR_DUTY)); +} + +/** + * @brief Configure the I2C master clock speed mode. + * @rmtoll CCR FS LL_I2C_SetClockSpeedMode + * @param I2Cx I2C Instance. + * @param ClockSpeedMode This parameter can be one of the following values: + * @arg @ref LL_I2C_CLOCK_SPEED_STANDARD_MODE + * @arg @ref LL_I2C_CLOCK_SPEED_FAST_MODE + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetClockSpeedMode(I2C_TypeDef *I2Cx, uint32_t ClockSpeedMode) +{ + MODIFY_REG(I2Cx->CCR, I2C_CCR_FS, ClockSpeedMode); +} + +/** + * @brief Get the the I2C master speed mode. + * @rmtoll CCR FS LL_I2C_GetClockSpeedMode + * @param I2Cx I2C Instance. + * @retval Returned value can be one of the following values: + * @arg @ref LL_I2C_CLOCK_SPEED_STANDARD_MODE + * @arg @ref LL_I2C_CLOCK_SPEED_FAST_MODE + */ +__STATIC_INLINE uint32_t LL_I2C_GetClockSpeedMode(I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->CCR, I2C_CCR_FS)); +} + +/** + * @brief Configure the SCL, SDA rising time. + * @note This bit can only be programmed when the I2C is disabled (PE = 0). + * @rmtoll TRISE TRISE LL_I2C_SetRiseTime + * @param I2Cx I2C Instance. + * @param RiseTime This parameter must be a value between Min_Data=0x02 and Max_Data=0x3F. + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetRiseTime(I2C_TypeDef *I2Cx, uint32_t RiseTime) +{ + MODIFY_REG(I2Cx->TRISE, I2C_TRISE_TRISE, RiseTime); +} + +/** + * @brief Get the SCL, SDA rising time. + * @rmtoll TRISE TRISE LL_I2C_GetRiseTime + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0x02 and Max_Data=0x3F + */ +__STATIC_INLINE uint32_t LL_I2C_GetRiseTime(I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->TRISE, I2C_TRISE_TRISE)); +} + +/** + * @brief Configure the SCL high and low period. + * @note This bit can only be programmed when the I2C is disabled (PE = 0). + * @rmtoll CCR CCR LL_I2C_SetClockPeriod + * @param I2Cx I2C Instance. + * @param ClockPeriod This parameter must be a value between Min_Data=0x004 and Max_Data=0xFFF, except in FAST DUTY mode where Min_Data=0x001. + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetClockPeriod(I2C_TypeDef *I2Cx, uint32_t ClockPeriod) +{ + MODIFY_REG(I2Cx->CCR, I2C_CCR_CCR, ClockPeriod); +} + +/** + * @brief Get the SCL high and low period. + * @rmtoll CCR CCR LL_I2C_GetClockPeriod + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0x004 and Max_Data=0xFFF, except in FAST DUTY mode where Min_Data=0x001. + */ +__STATIC_INLINE uint32_t LL_I2C_GetClockPeriod(I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->CCR, I2C_CCR_CCR)); +} + +/** + * @brief Configure the SCL speed. + * @note This bit can only be programmed when the I2C is disabled (PE = 0). + * @rmtoll CR2 FREQ LL_I2C_ConfigSpeed\n + * TRISE TRISE LL_I2C_ConfigSpeed\n + * CCR FS LL_I2C_ConfigSpeed\n + * CCR DUTY LL_I2C_ConfigSpeed\n + * CCR CCR LL_I2C_ConfigSpeed + * @param I2Cx I2C Instance. + * @param PeriphClock Peripheral Clock (in Hz) + * @param ClockSpeed This parameter must be a value lower than 400kHz (in Hz). + * @param DutyCycle This parameter can be one of the following values: + * @arg @ref LL_I2C_DUTYCYCLE_2 + * @arg @ref LL_I2C_DUTYCYCLE_16_9 + * @retval None + */ +__STATIC_INLINE void LL_I2C_ConfigSpeed(I2C_TypeDef *I2Cx, uint32_t PeriphClock, uint32_t ClockSpeed, + uint32_t DutyCycle) +{ + register uint32_t freqrange = 0x0U; + register uint32_t clockconfig = 0x0U; + + /* Compute frequency range */ + freqrange = __LL_I2C_FREQ_HZ_TO_MHZ(PeriphClock); + + /* Configure I2Cx: Frequency range register */ + MODIFY_REG(I2Cx->CR2, I2C_CR2_FREQ, freqrange); + + /* Configure I2Cx: Rise Time register */ + MODIFY_REG(I2Cx->TRISE, I2C_TRISE_TRISE, __LL_I2C_RISE_TIME(freqrange, ClockSpeed)); + + /* Configure Speed mode, Duty Cycle and Clock control register value */ + if (ClockSpeed > LL_I2C_MAX_SPEED_STANDARD) + { + /* Set Speed mode at fast and duty cycle for Clock Speed request in fast clock range */ + clockconfig = LL_I2C_CLOCK_SPEED_FAST_MODE | \ + __LL_I2C_SPEED_FAST_TO_CCR(PeriphClock, ClockSpeed, DutyCycle) | \ + DutyCycle; + } + else + { + /* Set Speed mode at standard for Clock Speed request in standard clock range */ + clockconfig = LL_I2C_CLOCK_SPEED_STANDARD_MODE | \ + __LL_I2C_SPEED_STANDARD_TO_CCR(PeriphClock, ClockSpeed); + } + + /* Configure I2Cx: Clock control register */ + MODIFY_REG(I2Cx->CCR, (I2C_CCR_FS | I2C_CCR_DUTY | I2C_CCR_CCR), clockconfig); +} + +/** + * @brief Configure peripheral mode. + * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll CR1 SMBUS LL_I2C_SetMode\n + * CR1 SMBTYPE LL_I2C_SetMode\n + * CR1 ENARP LL_I2C_SetMode + * @param I2Cx I2C Instance. + * @param PeripheralMode This parameter can be one of the following values: + * @arg @ref LL_I2C_MODE_I2C + * @arg @ref LL_I2C_MODE_SMBUS_HOST + * @arg @ref LL_I2C_MODE_SMBUS_DEVICE + * @arg @ref LL_I2C_MODE_SMBUS_DEVICE_ARP + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetMode(I2C_TypeDef *I2Cx, uint32_t PeripheralMode) +{ + MODIFY_REG(I2Cx->CR1, I2C_CR1_SMBUS | I2C_CR1_SMBTYPE | I2C_CR1_ENARP, PeripheralMode); +} + +/** + * @brief Get peripheral mode. + * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll CR1 SMBUS LL_I2C_GetMode\n + * CR1 SMBTYPE LL_I2C_GetMode\n + * CR1 ENARP LL_I2C_GetMode + * @param I2Cx I2C Instance. + * @retval Returned value can be one of the following values: + * @arg @ref LL_I2C_MODE_I2C + * @arg @ref LL_I2C_MODE_SMBUS_HOST + * @arg @ref LL_I2C_MODE_SMBUS_DEVICE + * @arg @ref LL_I2C_MODE_SMBUS_DEVICE_ARP + */ +__STATIC_INLINE uint32_t LL_I2C_GetMode(I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->CR1, I2C_CR1_SMBUS | I2C_CR1_SMBTYPE | I2C_CR1_ENARP)); +} + +/** + * @brief Enable SMBus alert (Host or Device mode) + * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note SMBus Device mode: + * - SMBus Alert pin is drived low and + * Alert Response Address Header acknowledge is enabled. + * SMBus Host mode: + * - SMBus Alert pin management is supported. + * @rmtoll CR1 ALERT LL_I2C_EnableSMBusAlert + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableSMBusAlert(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_ALERT); +} + +/** + * @brief Disable SMBus alert (Host or Device mode) + * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note SMBus Device mode: + * - SMBus Alert pin is not drived (can be used as a standard GPIO) and + * Alert Response Address Header acknowledge is disabled. + * SMBus Host mode: + * - SMBus Alert pin management is not supported. + * @rmtoll CR1 ALERT LL_I2C_DisableSMBusAlert + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableSMBusAlert(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_ALERT); +} + +/** + * @brief Check if SMBus alert (Host or Device mode) is enabled or disabled. + * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll CR1 ALERT LL_I2C_IsEnabledSMBusAlert + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledSMBusAlert(I2C_TypeDef *I2Cx) +{ + return (READ_BIT(I2Cx->CR1, I2C_CR1_ALERT) == (I2C_CR1_ALERT)); +} + +/** + * @brief Enable SMBus Packet Error Calculation (PEC). + * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll CR1 ENPEC LL_I2C_EnableSMBusPEC + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableSMBusPEC(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_ENPEC); +} + +/** + * @brief Disable SMBus Packet Error Calculation (PEC). + * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll CR1 ENPEC LL_I2C_DisableSMBusPEC + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableSMBusPEC(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_ENPEC); +} + +/** + * @brief Check if SMBus Packet Error Calculation (PEC) is enabled or disabled. + * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll CR1 ENPEC LL_I2C_IsEnabledSMBusPEC + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledSMBusPEC(I2C_TypeDef *I2Cx) +{ + return (READ_BIT(I2Cx->CR1, I2C_CR1_ENPEC) == (I2C_CR1_ENPEC)); +} + +/** + * @} + */ + +/** @defgroup I2C_LL_EF_IT_Management IT_Management + * @{ + */ + +/** + * @brief Enable TXE interrupt. + * @rmtoll CR2 ITEVTEN LL_I2C_EnableIT_TX\n + * CR2 ITBUFEN LL_I2C_EnableIT_TX + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableIT_TX(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR2, I2C_CR2_ITEVTEN | I2C_CR2_ITBUFEN); +} + +/** + * @brief Disable TXE interrupt. + * @rmtoll CR2 ITEVTEN LL_I2C_DisableIT_TX\n + * CR2 ITBUFEN LL_I2C_DisableIT_TX + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableIT_TX(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR2, I2C_CR2_ITEVTEN | I2C_CR2_ITBUFEN); +} + +/** + * @brief Check if the TXE Interrupt is enabled or disabled. + * @rmtoll CR2 ITEVTEN LL_I2C_IsEnabledIT_TX\n + * CR2 ITBUFEN LL_I2C_IsEnabledIT_TX + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledIT_TX(I2C_TypeDef *I2Cx) +{ + return (READ_BIT(I2Cx->CR2, I2C_CR2_ITEVTEN | I2C_CR2_ITBUFEN) == (I2C_CR2_ITEVTEN | I2C_CR2_ITBUFEN)); +} + +/** + * @brief Enable RXNE interrupt. + * @rmtoll CR2 ITEVTEN LL_I2C_EnableIT_RX\n + * CR2 ITBUFEN LL_I2C_EnableIT_RX + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableIT_RX(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR2, I2C_CR2_ITEVTEN | I2C_CR2_ITBUFEN); +} + +/** + * @brief Disable RXNE interrupt. + * @rmtoll CR2 ITEVTEN LL_I2C_DisableIT_RX\n + * CR2 ITBUFEN LL_I2C_DisableIT_RX + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableIT_RX(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR2, I2C_CR2_ITEVTEN | I2C_CR2_ITBUFEN); +} + +/** + * @brief Check if the RXNE Interrupt is enabled or disabled. + * @rmtoll CR2 ITEVTEN LL_I2C_IsEnabledIT_RX\n + * CR2 ITBUFEN LL_I2C_IsEnabledIT_RX + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledIT_RX(I2C_TypeDef *I2Cx) +{ + return (READ_BIT(I2Cx->CR2, I2C_CR2_ITEVTEN | I2C_CR2_ITBUFEN) == (I2C_CR2_ITEVTEN | I2C_CR2_ITBUFEN)); +} + +/** + * @brief Enable Events interrupts. + * @note Any of these events will generate interrupt : + * Start Bit (SB) + * Address sent, Address matched (ADDR) + * 10-bit header sent (ADD10) + * Stop detection (STOPF) + * Byte transfer finished (BTF) + * + * @note Any of these events will generate interrupt if Buffer interrupts are enabled too(using unitary function @ref LL_I2C_EnableIT_BUF()) : + * Receive buffer not empty (RXNE) + * Transmit buffer empty (TXE) + * @rmtoll CR2 ITEVTEN LL_I2C_EnableIT_EVT + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableIT_EVT(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR2, I2C_CR2_ITEVTEN); +} + +/** + * @brief Disable Events interrupts. + * @note Any of these events will generate interrupt : + * Start Bit (SB) + * Address sent, Address matched (ADDR) + * 10-bit header sent (ADD10) + * Stop detection (STOPF) + * Byte transfer finished (BTF) + * Receive buffer not empty (RXNE) + * Transmit buffer empty (TXE) + * @rmtoll CR2 ITEVTEN LL_I2C_DisableIT_EVT + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableIT_EVT(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR2, I2C_CR2_ITEVTEN); +} + +/** + * @brief Check if Events interrupts are enabled or disabled. + * @rmtoll CR2 ITEVTEN LL_I2C_IsEnabledIT_EVT + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledIT_EVT(I2C_TypeDef *I2Cx) +{ + return (READ_BIT(I2Cx->CR2, I2C_CR2_ITEVTEN) == (I2C_CR2_ITEVTEN)); +} + +/** + * @brief Enable Buffer interrupts. + * @note Any of these Buffer events will generate interrupt if Events interrupts are enabled too(using unitary function @ref LL_I2C_EnableIT_EVT()) : + * Receive buffer not empty (RXNE) + * Transmit buffer empty (TXE) + * @rmtoll CR2 ITBUFEN LL_I2C_EnableIT_BUF + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableIT_BUF(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR2, I2C_CR2_ITBUFEN); +} + +/** + * @brief Disable Buffer interrupts. + * @note Any of these Buffer events will generate interrupt : + * Receive buffer not empty (RXNE) + * Transmit buffer empty (TXE) + * @rmtoll CR2 ITBUFEN LL_I2C_DisableIT_BUF + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableIT_BUF(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR2, I2C_CR2_ITBUFEN); +} + +/** + * @brief Check if Buffer interrupts are enabled or disabled. + * @rmtoll CR2 ITBUFEN LL_I2C_IsEnabledIT_BUF + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledIT_BUF(I2C_TypeDef *I2Cx) +{ + return (READ_BIT(I2Cx->CR2, I2C_CR2_ITBUFEN) == (I2C_CR2_ITBUFEN)); +} + +/** + * @brief Enable Error interrupts. + * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note Any of these errors will generate interrupt : + * Bus Error detection (BERR) + * Arbitration Loss (ARLO) + * Acknowledge Failure(AF) + * Overrun/Underrun (OVR) + * SMBus Timeout detection (TIMEOUT) + * SMBus PEC error detection (PECERR) + * SMBus Alert pin event detection (SMBALERT) + * @rmtoll CR2 ITERREN LL_I2C_EnableIT_ERR + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableIT_ERR(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR2, I2C_CR2_ITERREN); +} + +/** + * @brief Disable Error interrupts. + * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note Any of these errors will generate interrupt : + * Bus Error detection (BERR) + * Arbitration Loss (ARLO) + * Acknowledge Failure(AF) + * Overrun/Underrun (OVR) + * SMBus Timeout detection (TIMEOUT) + * SMBus PEC error detection (PECERR) + * SMBus Alert pin event detection (SMBALERT) + * @rmtoll CR2 ITERREN LL_I2C_DisableIT_ERR + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableIT_ERR(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR2, I2C_CR2_ITERREN); +} + +/** + * @brief Check if Error interrupts are enabled or disabled. + * @rmtoll CR2 ITERREN LL_I2C_IsEnabledIT_ERR + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledIT_ERR(I2C_TypeDef *I2Cx) +{ + return (READ_BIT(I2Cx->CR2, I2C_CR2_ITERREN) == (I2C_CR2_ITERREN)); +} + +/** + * @} + */ + +/** @defgroup I2C_LL_EF_FLAG_management FLAG_management + * @{ + */ + +/** + * @brief Indicate the status of Transmit data register empty flag. + * @note RESET: When next data is written in Transmit data register. + * SET: When Transmit data register is empty. + * @rmtoll SR1 TXE LL_I2C_IsActiveFlag_TXE + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_TXE(I2C_TypeDef *I2Cx) +{ + return (READ_BIT(I2Cx->SR1, I2C_SR1_TXE) == (I2C_SR1_TXE)); +} + +/** + * @brief Indicate the status of Byte Transfer Finished flag. + * RESET: When Data byte transfer not done. + * SET: When Data byte transfer succeeded. + * @rmtoll SR1 BTF LL_I2C_IsActiveFlag_BTF + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_BTF(I2C_TypeDef *I2Cx) +{ + return (READ_BIT(I2Cx->SR1, I2C_SR1_BTF) == (I2C_SR1_BTF)); +} + +/** + * @brief Indicate the status of Receive data register not empty flag. + * @note RESET: When Receive data register is read. + * SET: When the received data is copied in Receive data register. + * @rmtoll SR1 RXNE LL_I2C_IsActiveFlag_RXNE + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_RXNE(I2C_TypeDef *I2Cx) +{ + return (READ_BIT(I2Cx->SR1, I2C_SR1_RXNE) == (I2C_SR1_RXNE)); +} + +/** + * @brief Indicate the status of Start Bit (master mode). + * @note RESET: When No Start condition. + * SET: When Start condition is generated. + * @rmtoll SR1 SB LL_I2C_IsActiveFlag_SB + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_SB(I2C_TypeDef *I2Cx) +{ + return (READ_BIT(I2Cx->SR1, I2C_SR1_SB) == (I2C_SR1_SB)); +} + +/** + * @brief Indicate the status of Address sent (master mode) or Address matched flag (slave mode). + * @note RESET: Clear default value. + * SET: When the address is fully sent (master mode) or when the received slave address matched with one of the enabled slave address (slave mode). + * @rmtoll SR1 ADDR LL_I2C_IsActiveFlag_ADDR + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_ADDR(I2C_TypeDef *I2Cx) +{ + return (READ_BIT(I2Cx->SR1, I2C_SR1_ADDR) == (I2C_SR1_ADDR)); +} + +/** + * @brief Indicate the status of 10-bit header sent (master mode). + * @note RESET: When no ADD10 event occured. + * SET: When the master has sent the first address byte (header). + * @rmtoll SR1 ADD10 LL_I2C_IsActiveFlag_ADD10 + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_ADD10(I2C_TypeDef *I2Cx) +{ + return (READ_BIT(I2Cx->SR1, I2C_SR1_ADD10) == (I2C_SR1_ADD10)); +} + +/** + * @brief Indicate the status of Acknowledge failure flag. + * @note RESET: No acknowledge failure. + * SET: When an acknowledge failure is received after a byte transmission. + * @rmtoll SR1 AF LL_I2C_IsActiveFlag_AF + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_AF(I2C_TypeDef *I2Cx) +{ + return (READ_BIT(I2Cx->SR1, I2C_SR1_AF) == (I2C_SR1_AF)); +} + +/** + * @brief Indicate the status of Stop detection flag (slave mode). + * @note RESET: Clear default value. + * SET: When a Stop condition is detected. + * @rmtoll SR1 STOPF LL_I2C_IsActiveFlag_STOP + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_STOP(I2C_TypeDef *I2Cx) +{ + return (READ_BIT(I2Cx->SR1, I2C_SR1_STOPF) == (I2C_SR1_STOPF)); +} + +/** + * @brief Indicate the status of Bus error flag. + * @note RESET: Clear default value. + * SET: When a misplaced Start or Stop condition is detected. + * @rmtoll SR1 BERR LL_I2C_IsActiveFlag_BERR + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_BERR(I2C_TypeDef *I2Cx) +{ + return (READ_BIT(I2Cx->SR1, I2C_SR1_BERR) == (I2C_SR1_BERR)); +} + +/** + * @brief Indicate the status of Arbitration lost flag. + * @note RESET: Clear default value. + * SET: When arbitration lost. + * @rmtoll SR1 ARLO LL_I2C_IsActiveFlag_ARLO + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_ARLO(I2C_TypeDef *I2Cx) +{ + return (READ_BIT(I2Cx->SR1, I2C_SR1_ARLO) == (I2C_SR1_ARLO)); +} + +/** + * @brief Indicate the status of Overrun/Underrun flag. + * @note RESET: Clear default value. + * SET: When an overrun/underrun error occurs (Clock Stretching Disabled). + * @rmtoll SR1 OVR LL_I2C_IsActiveFlag_OVR + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_OVR(I2C_TypeDef *I2Cx) +{ + return (READ_BIT(I2Cx->SR1, I2C_SR1_OVR) == (I2C_SR1_OVR)); +} + +/** + * @brief Indicate the status of SMBus PEC error flag in reception. + * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll SR1 PECERR LL_I2C_IsActiveSMBusFlag_PECERR + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveSMBusFlag_PECERR(I2C_TypeDef *I2Cx) +{ + return (READ_BIT(I2Cx->SR1, I2C_SR1_PECERR) == (I2C_SR1_PECERR)); +} + +/** + * @brief Indicate the status of SMBus Timeout detection flag. + * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll SR1 TIMEOUT LL_I2C_IsActiveSMBusFlag_TIMEOUT + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveSMBusFlag_TIMEOUT(I2C_TypeDef *I2Cx) +{ + return (READ_BIT(I2Cx->SR1, I2C_SR1_TIMEOUT) == (I2C_SR1_TIMEOUT)); +} + +/** + * @brief Indicate the status of SMBus alert flag. + * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll SR1 SMBALERT LL_I2C_IsActiveSMBusFlag_ALERT + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveSMBusFlag_ALERT(I2C_TypeDef *I2Cx) +{ + return (READ_BIT(I2Cx->SR1, I2C_SR1_SMBALERT) == (I2C_SR1_SMBALERT)); +} + +/** + * @brief Indicate the status of Bus Busy flag. + * @note RESET: Clear default value. + * SET: When a Start condition is detected. + * @rmtoll SR2 BUSY LL_I2C_IsActiveFlag_BUSY + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_BUSY(I2C_TypeDef *I2Cx) +{ + return (READ_BIT(I2Cx->SR2, I2C_SR2_BUSY) == (I2C_SR2_BUSY)); +} + +/** + * @brief Indicate the status of Dual flag. + * @note RESET: Received address matched with OAR1. + * SET: Received address matched with OAR2. + * @rmtoll SR2 DUALF LL_I2C_IsActiveFlag_DUAL + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_DUAL(I2C_TypeDef *I2Cx) +{ + return (READ_BIT(I2Cx->SR2, I2C_SR2_DUALF) == (I2C_SR2_DUALF)); +} + +/** + * @brief Indicate the status of SMBus Host address reception (Slave mode). + * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note RESET: No SMBus Host address + * SET: SMBus Host address received. + * @note This status is cleared by hardware after a STOP condition or repeated START condition. + * @rmtoll SR2 SMBHOST LL_I2C_IsActiveSMBusFlag_SMBHOST + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveSMBusFlag_SMBHOST(I2C_TypeDef *I2Cx) +{ + return (READ_BIT(I2Cx->SR2, I2C_SR2_SMBHOST) == (I2C_SR2_SMBHOST)); +} + +/** + * @brief Indicate the status of SMBus Device default address reception (Slave mode). + * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note RESET: No SMBus Device default address + * SET: SMBus Device default address received. + * @note This status is cleared by hardware after a STOP condition or repeated START condition. + * @rmtoll SR2 SMBDEFAULT LL_I2C_IsActiveSMBusFlag_SMBDEFAULT + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveSMBusFlag_SMBDEFAULT(I2C_TypeDef *I2Cx) +{ + return (READ_BIT(I2Cx->SR2, I2C_SR2_SMBDEFAULT) == (I2C_SR2_SMBDEFAULT)); +} + +/** + * @brief Indicate the status of General call address reception (Slave mode). + * @note RESET: No Generall call address + * SET: General call address received. + * @note This status is cleared by hardware after a STOP condition or repeated START condition. + * @rmtoll SR2 GENCALL LL_I2C_IsActiveFlag_GENCALL + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_GENCALL(I2C_TypeDef *I2Cx) +{ + return (READ_BIT(I2Cx->SR2, I2C_SR2_GENCALL) == (I2C_SR2_GENCALL)); +} + +/** + * @brief Indicate the status of Master/Slave flag. + * @note RESET: Slave Mode. + * SET: Master Mode. + * @rmtoll SR2 MSL LL_I2C_IsActiveFlag_MSL + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_MSL(I2C_TypeDef *I2Cx) +{ + return (READ_BIT(I2Cx->SR2, I2C_SR2_MSL) == (I2C_SR2_MSL)); +} + +/** + * @brief Clear Address Matched flag. + * @note Clearing this flag is done by a read access to the I2Cx_SR1 + * register followed by a read access to the I2Cx_SR2 register. + * @rmtoll SR1 ADDR LL_I2C_ClearFlag_ADDR + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_ClearFlag_ADDR(I2C_TypeDef *I2Cx) +{ + __IO uint32_t tmpreg; + tmpreg = I2Cx->SR1; + (void) tmpreg; + tmpreg = I2Cx->SR2; + (void) tmpreg; +} + +/** + * @brief Clear Acknowledge failure flag. + * @rmtoll SR1 AF LL_I2C_ClearFlag_AF + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_ClearFlag_AF(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->SR1, I2C_SR1_AF); +} + +/** + * @brief Clear Stop detection flag. + * @note Clearing this flag is done by a read access to the I2Cx_SR1 + * register followed by a write access to I2Cx_CR1 register. + * @rmtoll SR1 STOPF LL_I2C_ClearFlag_STOP\n + * CR1 PE LL_I2C_ClearFlag_STOP + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_ClearFlag_STOP(I2C_TypeDef *I2Cx) +{ + __IO uint32_t tmpreg; + tmpreg = I2Cx->SR1; + (void) tmpreg; + SET_BIT(I2Cx->CR1, I2C_CR1_PE); +} + +/** + * @brief Clear Bus error flag. + * @rmtoll SR1 BERR LL_I2C_ClearFlag_BERR + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_ClearFlag_BERR(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->SR1, I2C_SR1_BERR); +} + +/** + * @brief Clear Arbitration lost flag. + * @rmtoll SR1 ARLO LL_I2C_ClearFlag_ARLO + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_ClearFlag_ARLO(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->SR1, I2C_SR1_ARLO); +} + +/** + * @brief Clear Overrun/Underrun flag. + * @rmtoll SR1 OVR LL_I2C_ClearFlag_OVR + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_ClearFlag_OVR(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->SR1, I2C_SR1_OVR); +} + +/** + * @brief Clear SMBus PEC error flag. + * @rmtoll SR1 PECERR LL_I2C_ClearSMBusFlag_PECERR + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_ClearSMBusFlag_PECERR(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->SR1, I2C_SR1_PECERR); +} + +/** + * @brief Clear SMBus Timeout detection flag. + * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll SR1 TIMEOUT LL_I2C_ClearSMBusFlag_TIMEOUT + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_ClearSMBusFlag_TIMEOUT(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->SR1, I2C_SR1_TIMEOUT); +} + +/** + * @brief Clear SMBus Alert flag. + * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll SR1 SMBALERT LL_I2C_ClearSMBusFlag_ALERT + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_ClearSMBusFlag_ALERT(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->SR1, I2C_SR1_SMBALERT); +} + +/** + * @} + */ + +/** @defgroup I2C_LL_EF_Data_Management Data_Management + * @{ + */ + +/** + * @brief Enable Reset of I2C peripheral. + * @rmtoll CR1 SWRST LL_I2C_EnableReset + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableReset(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_SWRST); +} + +/** + * @brief Check if the I2C peripheral is under reset state or not. + * @rmtoll CR1 SWRST LL_I2C_IsResetEnabled + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsResetEnabled(I2C_TypeDef *I2Cx) +{ + return (READ_BIT(I2Cx->CR1, I2C_CR1_SWRST) == (I2C_CR1_SWRST)); +} + +/** + * @brief Prepare the generation of a ACKnowledge or Non ACKnowledge condition after the address receive match code or next received byte. + * @note Usage in Slave or Master mode. + * @rmtoll CR1 ACK LL_I2C_AcknowledgeNextData + * @param I2Cx I2C Instance. + * @param TypeAcknowledge This parameter can be one of the following values: + * @arg @ref LL_I2C_ACK + * @arg @ref LL_I2C_NACK + * @retval None + */ +__STATIC_INLINE void LL_I2C_AcknowledgeNextData(I2C_TypeDef *I2Cx, uint32_t TypeAcknowledge) +{ + MODIFY_REG(I2Cx->CR1, I2C_CR1_ACK, TypeAcknowledge); +} + +/** + * @brief Generate a START or RESTART condition + * @note The START bit can be set even if bus is BUSY or I2C is in slave mode. + * This action has no effect when RELOAD is set. + * @rmtoll CR1 START LL_I2C_GenerateStartCondition + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_GenerateStartCondition(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_START); +} + +/** + * @brief Generate a STOP condition after the current byte transfer (master mode). + * @rmtoll CR1 STOP LL_I2C_GenerateStopCondition + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_GenerateStopCondition(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_STOP); +} + +/** + * @brief Enable bit POS (master/host mode). + * @note In that case, the ACK bit controls the (N)ACK of the next byte received or the PEC bit indicates that the next byte in shift register is a PEC. + * @rmtoll CR1 POS LL_I2C_EnableBitPOS + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableBitPOS(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_POS); +} + +/** + * @brief Disable bit POS (master/host mode). + * @note In that case, the ACK bit controls the (N)ACK of the current byte received or the PEC bit indicates that the current byte in shift register is a PEC. + * @rmtoll CR1 POS LL_I2C_DisableBitPOS + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableBitPOS(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_POS); +} + +/** + * @brief Check if bit POS is enabled or disabled. + * @rmtoll CR1 POS LL_I2C_IsEnabledBitPOS + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledBitPOS(I2C_TypeDef *I2Cx) +{ + return (READ_BIT(I2Cx->CR1, I2C_CR1_POS) == (I2C_CR1_POS)); +} + +/** + * @brief Indicate the value of transfer direction. + * @note RESET: Bus is in read transfer (peripheral point of view). + * SET: Bus is in write transfer (peripheral point of view). + * @rmtoll SR2 TRA LL_I2C_GetTransferDirection + * @param I2Cx I2C Instance. + * @retval Returned value can be one of the following values: + * @arg @ref LL_I2C_DIRECTION_WRITE + * @arg @ref LL_I2C_DIRECTION_READ + */ +__STATIC_INLINE uint32_t LL_I2C_GetTransferDirection(I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->SR2, I2C_SR2_TRA)); +} + +/** + * @brief Enable DMA last transfer. + * @note This action mean that next DMA EOT is the last transfer. + * @rmtoll CR2 LAST LL_I2C_EnableLastDMA + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableLastDMA(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR2, I2C_CR2_LAST); +} + +/** + * @brief Disable DMA last transfer. + * @note This action mean that next DMA EOT is not the last transfer. + * @rmtoll CR2 LAST LL_I2C_DisableLastDMA + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableLastDMA(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR2, I2C_CR2_LAST); +} + +/** + * @brief Check if DMA last transfer is enabled or disabled. + * @rmtoll CR2 LAST LL_I2C_IsEnabledLastDMA + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledLastDMA(I2C_TypeDef *I2Cx) +{ + return (READ_BIT(I2Cx->CR2, I2C_CR2_LAST) == (I2C_CR2_LAST)); +} + +/** + * @brief Enable transfer or internal comparison of the SMBus Packet Error byte (transmission or reception mode). + * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note This feature is cleared by hardware when the PEC byte is transferred or compared, + * or by a START or STOP condition, it is also cleared by software. + * @rmtoll CR1 PEC LL_I2C_EnableSMBusPECCompare + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableSMBusPECCompare(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_PEC); +} + +/** + * @brief Disable transfer or internal comparison of the SMBus Packet Error byte (transmission or reception mode). + * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll CR1 PEC LL_I2C_DisableSMBusPECCompare + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableSMBusPECCompare(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_PEC); +} + +/** + * @brief Check if the SMBus Packet Error byte transfer or internal comparison is requested or not. + * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll CR1 PEC LL_I2C_IsEnabledSMBusPECCompare + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledSMBusPECCompare(I2C_TypeDef *I2Cx) +{ + return (READ_BIT(I2Cx->CR1, I2C_CR1_PEC) == (I2C_CR1_PEC)); +} + +/** + * @brief Get the SMBus Packet Error byte calculated. + * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll SR2 PEC LL_I2C_GetSMBusPEC + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0x00 and Max_Data=0xFF + */ +__STATIC_INLINE uint32_t LL_I2C_GetSMBusPEC(I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->SR2, I2C_SR2_PEC) >> LL_I2C_POSITION_SR2_PEC); +} + +/** + * @brief Read Receive Data register. + * @rmtoll DR DR LL_I2C_ReceiveData8 + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0x0 and Max_Data=0xFF + */ +__STATIC_INLINE uint8_t LL_I2C_ReceiveData8(I2C_TypeDef *I2Cx) +{ + return (uint8_t)(READ_BIT(I2Cx->DR, I2C_DR_DR)); +} + +/** + * @brief Write in Transmit Data Register . + * @rmtoll DR DR LL_I2C_TransmitData8 + * @param I2Cx I2C Instance. + * @param Data Value between Min_Data=0x0 and Max_Data=0xFF + * @retval None + */ +__STATIC_INLINE void LL_I2C_TransmitData8(I2C_TypeDef *I2Cx, uint8_t Data) +{ + MODIFY_REG(I2Cx->DR, I2C_DR_DR, Data); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup I2C_LL_EF_Init Initialization and de-initialization functions + * @{ + */ + +uint32_t LL_I2C_Init(I2C_TypeDef *I2Cx, LL_I2C_InitTypeDef *I2C_InitStruct); +uint32_t LL_I2C_DeInit(I2C_TypeDef *I2Cx); +void LL_I2C_StructInit(LL_I2C_InitTypeDef *I2C_InitStruct); + + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* I2C1 || I2C2 */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32L1xx_LL_I2C_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_ll_iwdg.h b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_ll_iwdg.h new file mode 100755 index 0000000..96bea35 --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_ll_iwdg.h @@ -0,0 +1,329 @@ +/** + ****************************************************************************** + * @file stm32l1xx_ll_iwdg.h + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief Header file of IWDG LL module. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L1xx_LL_IWDG_H +#define __STM32L1xx_LL_IWDG_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx.h" + +/** @addtogroup STM32L1xx_LL_Driver + * @{ + */ + +#if defined(IWDG) + +/** @defgroup IWDG_LL IWDG + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup IWDG_LL_Private_Constants IWDG Private Constants + * @{ + */ + +#define LL_IWDG_KEY_RELOAD ((uint32_t)0x0000AAAAU) /*!< IWDG Reload Counter Enable */ +#define LL_IWDG_KEY_ENABLE ((uint32_t)0x0000CCCCU) /*!< IWDG Peripheral Enable */ +#define LL_IWDG_KEY_WR_ACCESS_ENABLE ((uint32_t)0x00005555U) /*!< IWDG KR Write Access Enable */ +#define LL_IWDG_KEY_WR_ACCESS_DISABLE ((uint32_t)0x00000000U) /*!< IWDG KR Write Access Disable */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup IWDG_LL_Exported_Constants IWDG Exported Constants + * @{ + */ + +/** @defgroup IWDG_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_IWDG_ReadReg function + * @{ + */ +#define LL_IWDG_SR_PVU IWDG_SR_PVU /*!< Watchdog prescaler value update */ +#define LL_IWDG_SR_RVU IWDG_SR_RVU /*!< Watchdog counter reload value update */ + +/** + * @} + */ + +/** @defgroup IWDG_LL_EC_PRESCALER Prescaler Divider + * @{ + */ +#define LL_IWDG_PRESCALER_4 ((uint32_t)0x00000000U) /*!< Divider by 4 */ +#define LL_IWDG_PRESCALER_8 (IWDG_PR_PR_0) /*!< Divider by 8 */ +#define LL_IWDG_PRESCALER_16 (IWDG_PR_PR_1) /*!< Divider by 16 */ +#define LL_IWDG_PRESCALER_32 (IWDG_PR_PR_1 | IWDG_PR_PR_0) /*!< Divider by 32 */ +#define LL_IWDG_PRESCALER_64 (IWDG_PR_PR_2) /*!< Divider by 64 */ +#define LL_IWDG_PRESCALER_128 (IWDG_PR_PR_2 | IWDG_PR_PR_0) /*!< Divider by 128 */ +#define LL_IWDG_PRESCALER_256 (IWDG_PR_PR_2 | IWDG_PR_PR_1) /*!< Divider by 256 */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup IWDG_LL_Exported_Macros IWDG Exported Macros + * @{ + */ + +/** @defgroup IWDG_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in IWDG register + * @param __INSTANCE__ IWDG Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_IWDG_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in IWDG register + * @param __INSTANCE__ IWDG Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_IWDG_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** + * @} + */ + + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup IWDG_LL_Exported_Functions IWDG Exported Functions + * @{ + */ +/** @defgroup IWDG_LL_EF_Configuration Configuration + * @{ + */ + +/** + * @brief Start the Independent Watchdog + * @note Except if the hardware watchdog option is selected + * @rmtoll KR KEY LL_IWDG_Enable + * @param IWDGx IWDG Instance + * @retval None + */ +__STATIC_INLINE void LL_IWDG_Enable(IWDG_TypeDef *IWDGx) +{ + WRITE_REG(IWDG->KR, LL_IWDG_KEY_ENABLE); +} + +/** + * @brief Reloads IWDG counter with value defined in the reload register + * @rmtoll KR KEY LL_IWDG_ReloadCounter + * @param IWDGx IWDG Instance + * @retval None + */ +__STATIC_INLINE void LL_IWDG_ReloadCounter(IWDG_TypeDef *IWDGx) +{ + WRITE_REG(IWDG->KR, LL_IWDG_KEY_RELOAD); +} + +/** + * @brief Enable write access to IWDG_PR, IWDG_RLR and IWDG_WINR registers + * @rmtoll KR KEY LL_IWDG_EnableWriteAccess + * @param IWDGx IWDG Instance + * @retval None + */ +__STATIC_INLINE void LL_IWDG_EnableWriteAccess(IWDG_TypeDef *IWDGx) +{ + WRITE_REG(IWDG->KR, LL_IWDG_KEY_WR_ACCESS_ENABLE); +} + +/** + * @brief Disable write access to IWDG_PR, IWDG_RLR and IWDG_WINR registers + * @rmtoll KR KEY LL_IWDG_DisableWriteAccess + * @param IWDGx IWDG Instance + * @retval None + */ +__STATIC_INLINE void LL_IWDG_DisableWriteAccess(IWDG_TypeDef *IWDGx) +{ + WRITE_REG(IWDG->KR, LL_IWDG_KEY_WR_ACCESS_DISABLE); +} + +/** + * @brief Select the prescaler of the IWDG + * @rmtoll PR PR LL_IWDG_SetPrescaler + * @param IWDGx IWDG Instance + * @param Prescaler This parameter can be one of the following values: + * @arg @ref LL_IWDG_PRESCALER_4 + * @arg @ref LL_IWDG_PRESCALER_8 + * @arg @ref LL_IWDG_PRESCALER_16 + * @arg @ref LL_IWDG_PRESCALER_32 + * @arg @ref LL_IWDG_PRESCALER_64 + * @arg @ref LL_IWDG_PRESCALER_128 + * @arg @ref LL_IWDG_PRESCALER_256 + * @retval None + */ +__STATIC_INLINE void LL_IWDG_SetPrescaler(IWDG_TypeDef *IWDGx, uint32_t Prescaler) +{ + WRITE_REG(IWDGx->PR, IWDG_PR_PR & Prescaler); +} + +/** + * @brief Get the selected prescaler of the IWDG + * @rmtoll PR PR LL_IWDG_GetPrescaler + * @param IWDGx IWDG Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_IWDG_PRESCALER_4 + * @arg @ref LL_IWDG_PRESCALER_8 + * @arg @ref LL_IWDG_PRESCALER_16 + * @arg @ref LL_IWDG_PRESCALER_32 + * @arg @ref LL_IWDG_PRESCALER_64 + * @arg @ref LL_IWDG_PRESCALER_128 + * @arg @ref LL_IWDG_PRESCALER_256 + */ +__STATIC_INLINE uint32_t LL_IWDG_GetPrescaler(IWDG_TypeDef *IWDGx) +{ + return (uint32_t)(READ_REG(IWDGx->PR)); +} + +/** + * @brief Specify the IWDG down-counter reload value + * @rmtoll RLR RL LL_IWDG_SetReloadCounter + * @param IWDGx IWDG Instance + * @param Counter Value between Min_Data=0 and Max_Data=0x0FFF + * @retval None + */ +__STATIC_INLINE void LL_IWDG_SetReloadCounter(IWDG_TypeDef *IWDGx, uint32_t Counter) +{ + WRITE_REG(IWDGx->RLR, IWDG_RLR_RL & Counter); +} + +/** + * @brief Get the specified IWDG down-counter reload value + * @rmtoll RLR RL LL_IWDG_GetReloadCounter + * @param IWDGx IWDG Instance + * @retval Value between Min_Data=0 and Max_Data=0x0FFF + */ +__STATIC_INLINE uint32_t LL_IWDG_GetReloadCounter(IWDG_TypeDef *IWDGx) +{ + return (uint32_t)(READ_REG(IWDGx->RLR)); +} + + +/** + * @} + */ + +/** @defgroup IWDG_LL_EF_FLAG_Management FLAG_Management + * @{ + */ + +/** + * @brief Check if flag Prescaler Value Update is set or not + * @rmtoll SR PVU LL_IWDG_IsActiveFlag_PVU + * @param IWDGx IWDG Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_IWDG_IsActiveFlag_PVU(IWDG_TypeDef *IWDGx) +{ + return (READ_BIT(IWDGx->SR, IWDG_SR_PVU) == (IWDG_SR_PVU)); +} + +/** + * @brief Check if flag Reload Value Update is set or not + * @rmtoll SR RVU LL_IWDG_IsActiveFlag_RVU + * @param IWDGx IWDG Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_IWDG_IsActiveFlag_RVU(IWDG_TypeDef *IWDGx) +{ + return (READ_BIT(IWDGx->SR, IWDG_SR_RVU) == (IWDG_SR_RVU)); +} + + +/** + * @brief Check if all flags Prescaler, Reload & Window Value Update are reset or not + * @rmtoll SR PVU LL_IWDG_IsReady\n + * SR RVU LL_IWDG_IsReady + * @param IWDGx IWDG Instance + * @retval State of bits (1 or 0). + */ +__STATIC_INLINE uint32_t LL_IWDG_IsReady(IWDG_TypeDef *IWDGx) +{ + return (READ_BIT(IWDGx->SR, IWDG_SR_PVU | IWDG_SR_RVU) == 0U); +} + +/** + * @} + */ + + +/** + * @} + */ + +/** + * @} + */ + +#endif /* IWDG) */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32L1xx_LL_IWDG_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_ll_opamp.h b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_ll_opamp.h new file mode 100755 index 0000000..3b778e1 --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_ll_opamp.h @@ -0,0 +1,929 @@ +/** + ****************************************************************************** + * @file stm32l1xx_ll_opamp.h + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief Header file of OPAMP LL module. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L1xx_LL_OPAMP_H +#define __STM32L1xx_LL_OPAMP_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx.h" + +/** @addtogroup STM32L1xx_LL_Driver + * @{ + */ + +#if defined (OPAMP1) || defined (OPAMP2) || defined (OPAMP3) + +/** @defgroup OPAMP_LL OPAMP + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup OPAMP_LL_Private_Constants OPAMP Private Constants + * @{ + */ + +/* Internal mask for OPAMP power mode: */ +/* To select into literal LL_OPAMP_POWERMODE_x the relevant bits for: */ +/* - OPAMP power mode into control register */ +/* - OPAMP trimming register offset */ + +/* Internal register offset for OPAMP trimming configuration */ +#define OPAMP_POWERMODE_OTR_REGOFFSET ((uint32_t)0x00000000U) +#define OPAMP_POWERMODE_LPOTR_REGOFFSET ((uint32_t)0x00000001U) +#define OPAMP_POWERMODE_OTR_REGOFFSET_MASK (OPAMP_POWERMODE_OTR_REGOFFSET | OPAMP_POWERMODE_LPOTR_REGOFFSET) + +/* Mask for OPAMP power mode into control register */ +#define OPAMP_POWERMODE_CSR_BIT_MASK (OPAMP_CSR_OPA1LPM) + +/* Internal mask for OPAMP trimming of transistors differential pair NMOS */ +/* or PMOS. */ +/* To select into literal LL_OPAMP_TRIMMING_x the relevant bits for: */ +/* - OPAMP trimming selection of transistors differential pair */ +/* - OPAMP trimming values of transistors differential pair */ +#define OPAMP_TRIMMING_SELECT_SW_OFFSET ((uint32_t)16U) +#define OPAMP_TRIMMING_SELECT_MASK ((OPAMP_CSR_OPA1CAL_H | OPAMP_CSR_OPA1CAL_L) << OPAMP_TRIMMING_SELECT_SW_OFFSET) +#define OPAMP_TRIMMING_VALUE_MASK (OPAMP_OTR_AO1_OPT_OFFSET_TRIM_HIGH | OPAMP_OTR_AO1_OPT_OFFSET_TRIM_LOW) + +/** + * @} + */ + + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup OPAMP_LL_Private_Macros OPAMP Private Macros + * @{ + */ + +/** + * @brief Driver macro reserved for internal use: set a pointer to + * a register from a register basis from which an offset + * is applied. + * @param __REG__ Register basis from which the offset is applied. + * @param __REG_OFFSET__ Offset to be applied (unit: number of registers). + * @retval Register address +*/ +#define __OPAMP_PTR_REG_OFFSET(__REG__, __REG_OFFSET__) \ + ((uint32_t *)((uint32_t) ((uint32_t)(&(__REG__)) + ((__REG_OFFSET__) << 2U)))) + +/** + * @brief Driver macro reserved for internal use: from OPAMP instance + * selected, return the instance number in decimal format. + * @param __OPAMP_INSTANCE__ OPAMP instance + * @retval Instance number in decimal format: value "0" for OPAMP1, + * value "1" for OPAMP2, value "2" for OPAMP3. +*/ +#define __OPAMP_INSTANCE_DECIMAL(__OPAMP_INSTANCE__) \ + ((uint32_t)(__OPAMP_INSTANCE__) - OPAMP_BASE) + +/** + * @brief Driver macro reserved for internal use: from OPAMP instance + * selected, set offset of bits into OPAMP register. + * @note Since all OPAMP instances are sharing the same register + * with 3 area of bits with an offset of 8 bits (except bits + * OPAxCALOUT, OPARANGE, S7SEL2), this function + * returns . + * @param __OPAMP_INSTANCE__ OPAMP instance + * @retval Bits offset in register 32 bits: value "0" for OPAMP1, + * value "8" for OPAMP2, value "16" for OPAMP3 +*/ +#define __OPAMP_INSTANCE_BITOFFSET(__OPAMP_INSTANCE__) \ + (((uint32_t)(__OPAMP_INSTANCE__) - OPAMP_BASE) << 3U) + +/** + * @brief Driver macro reserved for internal use: from OPAMP instance + * selected, return whether it corresponds to instance OPAMP2. + * @param __OPAMP_INSTANCE__ OPAMP instance + * @retval Instance number in decimal format: value "0" for OPAMP1 or OPAMP3, + * value "1" for OPAMP2. +*/ +#define __OPAMP_IS_INSTANCE_OPAMP2(__OPAMP_INSTANCE__) \ + (((uint32_t)(__OPAMP_INSTANCE__) - OPAMP_BASE) % 2) + +/** + * @} + */ + + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup OPAMP_LL_ES_INIT OPAMP Exported Init structure + * @{ + */ + +/** + * @brief Structure definition of some features of OPAMP instance. + */ +typedef struct +{ + uint32_t PowerMode; /*!< Set OPAMP power mode. + This parameter can be a value of @ref OPAMP_LL_EC_POWERMODE + + This feature can be modified afterwards using unitary function @ref LL_OPAMP_SetPowerMode(). */ + + uint32_t FunctionalMode; /*!< Set OPAMP functional mode by setting internal connections: OPAMP operation in standalone, follower, ... + This parameter can be a value of @ref OPAMP_LL_EC_FUNCTIONAL_MODE + + This feature can be modified afterwards using unitary function @ref LL_OPAMP_SetFunctionalMode(). */ + + uint32_t InputNonInverting; /*!< Set OPAMP input non-inverting connection. + This parameter can be a value of @ref OPAMP_LL_EC_INPUT_NONINVERTING + + This feature can be modified afterwards using unitary function @ref LL_OPAMP_SetInputNonInverting(). */ + + uint32_t InputInverting; /*!< Set OPAMP inverting input connection. + This parameter can be a value of @ref OPAMP_LL_EC_INPUT_INVERTING + @note OPAMP inverting input is used with OPAMP in mode standalone. Otherwise (OPAMP in mode follower), OPAMP inverting input is not used (not connected to GPIO pin), this parameter is discarded. + + This feature can be modified afterwards using unitary function @ref LL_OPAMP_SetInputInverting(). */ + +} LL_OPAMP_InitTypeDef; + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup OPAMP_LL_Exported_Constants OPAMP Exported Constants + * @{ + */ + +/** @defgroup OPAMP_LL_EC_POWERSUPPLY_RANGE OPAMP power supply range + * @{ + */ +#define LL_OPAMP_POWERSUPPLY_RANGE_LOW ((uint32_t)0x00000000U) /*!< Power supply range low. On STM32L1 serie: Vdda lower than 2.4V. */ +#define LL_OPAMP_POWERSUPPLY_RANGE_HIGH (OPAMP_CSR_AOP_RANGE) /*!< Power supply range high. On STM32L1 serie: Vdda higher than 2.4V. */ +/** + * @} + */ + +/** @defgroup OPAMP_LL_EC_POWERMODE OPAMP power mode + * @{ + */ +#define LL_OPAMP_POWERMODE_NORMAL (OPAMP_POWERMODE_OTR_REGOFFSET) /*!< OPAMP power mode normal */ +#define LL_OPAMP_POWERMODE_LOWPOWER (OPAMP_POWERMODE_LPOTR_REGOFFSET | OPAMP_CSR_OPA1LPM) /*!< OPAMP power mode low-power */ +/** + * @} + */ + +/** @defgroup OPAMP_LL_EC_MODE OPAMP mode calibration or functional. + * @{ + */ +#define LL_OPAMP_MODE_FUNCTIONAL ((uint32_t)0x00000000U) /*!< OPAMP functional mode */ +#define LL_OPAMP_MODE_CALIBRATION (OPAMP_CSR_S3SEL1 | OPAMP_CSR_S4SEL1 | OPAMP_CSR_S5SEL1 | OPAMP_CSR_S6SEL1 | OPAMP_CSR_S7SEL2) /*!< OPAMP calibration mode (on STM32L1 serie, it corresponds to all OPAMP input internal switches opened) */ +/** + * @} + */ + +/** @defgroup OPAMP_LL_EC_FUNCTIONAL_MODE OPAMP functional mode + * @{ + */ +#define LL_OPAMP_MODE_STANDALONE ((uint32_t)0x00000000U) /*!< OPAMP functional mode, OPAMP operation in standalone (on STM32L1 serie, it corresponds to OPAMP internal switches S3 opened (switch SanB state depends on switch S4 state)) */ +#define LL_OPAMP_MODE_FOLLOWER (OPAMP_CSR_S3SEL1) /*!< OPAMP functional mode, OPAMP operation in follower (on STM32L1 serie, it corresponds to OPAMP internal switches S3 and SanB closed) */ +/** + * @} + */ + +/** @defgroup OPAMP_LL_EC_INPUT_NONINVERTING OPAMP input non-inverting + * @{ + */ +#define LL_OPAMP_INPUT_NONINVERT_IO0 (OPAMP_CSR_S5SEL1) /*!< OPAMP non inverting input connected to GPIO pin (low leakage input) */ +#define LL_OPAMP_INPUT_NONINV_DAC1_CH1 (OPAMP_CSR_S6SEL1) /*!< OPAMP non inverting input connected to DAC1 channel1 output (specific to OPAMP instances: OPAMP1, OPAMP2) */ +#define LL_OPAMP_INPUT_NONINV_DAC1_CH2 (OPAMP_CSR_S7SEL2) /*!< OPAMP non inverting input connected to DAC1 channel2 output (specific to OPAMP instances: OPAMP2, OPAMP3) */ +#if defined(OPAMP3) +#define LL_OPAMP_INPUT_NONINV_DAC1_CH2_OPAMP3 (OPAMP_CSR_S6SEL1) /*!< OPAMP non inverting input connected to DAC1 channel2 output (specific to OPAMP instances: OPAMP3) */ +#endif +/** + * @} + */ + +/** @defgroup OPAMP_LL_EC_INPUT_INVERTING OPAMP input inverting + * @{ + */ +#define LL_OPAMP_INPUT_INVERT_IO0 (OPAMP_CSR_S4SEL1) /*!< OPAMP inverting input connected to GPIO pin (low leakage input). Note: OPAMP inverting input is used with OPAMP in mode standalone. Otherwise (OPAMP in mode follower), OPAMP inverting input is not used (not connected to GPIO pin). */ +#define LL_OPAMP_INPUT_INVERT_IO1 (OPAMP_CSR_ANAWSEL1) /*!< OPAMP inverting input connected to GPIO pin (alternative IO pin, not low leakage, availability depends on STM32L1 serie devices packages). Note: OPAMP inverting input is used with OPAMP in mode standalone. Otherwise (OPAMP in mode follower), OPAMP inverting input is not used (not connected to GPIO pin). */ +#define LL_OPAMP_INPUT_INVERT_CONNECT_NO ((uint32_t)0x00000000U) /*!< OPAMP inverting input not externally connected (intended for OPAMP in mode follower) */ +/** + * @} + */ + +/** @defgroup OPAMP_LL_EC_TRIMMING_MODE OPAMP trimming mode + * @{ + */ +#define LL_OPAMP_TRIMMING_FACTORY ((uint32_t)0x00000000U) /*!< OPAMP trimming factors set to factory values */ +#define LL_OPAMP_TRIMMING_USER (OPAMP_OTR_OT_USER) /*!< OPAMP trimming factors set to user values */ +/** + * @} + */ + +/** @defgroup OPAMP_LL_EC_TRIMMING_TRANSISTORS_DIFF_PAIR OPAMP trimming of transistors differential pair NMOS or PMOS + * @{ + */ +#define LL_OPAMP_TRIMMING_NMOS (OPAMP_OTR_AO1_OPT_OFFSET_TRIM_HIGH | (OPAMP_CSR_OPA1CAL_H << OPAMP_TRIMMING_SELECT_SW_OFFSET)) /*!< OPAMP trimming of transistors differential pair NMOS */ +#define LL_OPAMP_TRIMMING_PMOS (OPAMP_OTR_AO1_OPT_OFFSET_TRIM_LOW | (OPAMP_CSR_OPA1CAL_L << OPAMP_TRIMMING_SELECT_SW_OFFSET)) /*!< OPAMP trimming of transistors differential pair PMOS */ +#define LL_OPAMP_TRIMMING_NONE ((uint32_t)0x00000000U) /*!< OPAMP trimming unselect transistors differential pair NMOS and PMOs */ +/** + * @} + */ + +/** @defgroup OPAMP_LL_EC_HW_DELAYS Definitions of OPAMP hardware constraints delays + * @note Only OPAMP IP HW delays are defined in OPAMP LL driver driver, + * not timeout values. + * For details on delays values, refer to descriptions in source code + * above each literal definition. + * @{ + */ + +/* Delay for OPAMP startup time (transition from state disable to enable). */ +/* Note: OPAMP startup time depends on board application environment: */ +/* impedance connected to OPAMP output. */ +/* The delay below is specified under conditions: */ +/* - OPAMP in mode low power */ +/* - load impedance of 4kOhm (min), 50pF (max) */ +/* Literal set to maximum value (refer to device datasheet, */ +/* parameter "tWAKEUP"). */ +/* Unit: us */ +#define LL_OPAMP_DELAY_STARTUP_US ((uint32_t) 30U) /*!< Delay for OPAMP startup time */ + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup OPAMP_LL_Exported_Macros OPAMP Exported Macros + * @{ + */ +/** @defgroup OPAMP_LL_EM_WRITE_READ Common write and read registers macro + * @{ + */ +/** + * @brief Write a value in OPAMP register + * @param __INSTANCE__ OPAMP Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_OPAMP_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in OPAMP register + * @param __INSTANCE__ OPAMP Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_OPAMP_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** @defgroup OPAMP_LL_EM_HELPER_MACRO OPAMP helper macro + * @{ + */ + +/** + * @brief Helper macro to select the OPAMP common instance + * to which is belonging the selected OPAMP instance. + * @note OPAMP common register instance can be used to + * set parameters common to several OPAMP instances. + * Refer to functions having argument "OPAMPxy_COMMON" as parameter. + * @param __OPAMPx__ OPAMP instance + * @retval OPAMP common instance + */ +#if defined(OPAMP1) && defined(OPAMP2) && defined(OPAMP3) +#define __LL_OPAMP_COMMON_INSTANCE(__OPAMPx__) \ + (OPAMP123_COMMON) +#else +#define __LL_OPAMP_COMMON_INSTANCE(__OPAMPx__) \ + (OPAMP12_COMMON) +#endif + +/** + * @brief Helper macro to check if all OPAMP instances sharing the same + * OPAMP common instance are disabled. + * @note This check is required by functions with setting conditioned to + * OPAMP state: + * All OPAMP instances of the OPAMP common group must be disabled. + * Refer to functions having argument "OPAMPxy_COMMON" as parameter. + * @retval 0: All OPAMP instances sharing the same OPAMP common instance + * are disabled. + * 1: At least one OPAMP instance sharing the same OPAMP common instance + * is enabled + */ +#if defined(OPAMP1) && defined(OPAMP2) && defined(OPAMP3) +#define __LL_OPAMP_IS_ENABLED_ALL_COMMON_INSTANCE() \ + (LL_OPAMP_IsEnabled(OPAMP1) | \ + LL_OPAMP_IsEnabled(OPAMP2) | \ + LL_OPAMP_IsEnabled(OPAMP3) ) +#else +#define __LL_OPAMP_IS_ENABLED_ALL_COMMON_INSTANCE() \ + (LL_OPAMP_IsEnabled(OPAMP1) | \ + LL_OPAMP_IsEnabled(OPAMP2) ) +#endif + +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup OPAMP_LL_Exported_Functions OPAMP Exported Functions + * @{ + */ + +/** @defgroup OPAMP_LL_EF_Configuration_opamp_common Configuration of OPAMP hierarchical scope: common to several OPAMP instances + * @{ + */ + +/** + * @brief Set OPAMP power range. + * @note The OPAMP power range applies to several OPAMP instances + * (if several OPAMP instances available on the selected device). + * @note On this STM32 serie, setting of this feature is conditioned to + * OPAMP state: + * All OPAMP instances of the OPAMP common group must be disabled. + * This check can be done with function @ref LL_OPAMP_IsEnabled() for each + * OPAMP instance or by using helper macro + * @ref __LL_OPAMP_IS_ENABLED_ALL_COMMON_INSTANCE(). + * @rmtoll CSR AOP_RANGE LL_OPAMP_SetCommonPowerRange + * @param OPAMPxy_COMMON OPAMP common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_OPAMP_COMMON_INSTANCE() ) + * @param PowerRange This parameter can be one of the following values: + * @arg @ref LL_OPAMP_POWERSUPPLY_RANGE_LOW + * @arg @ref LL_OPAMP_POWERSUPPLY_RANGE_HIGH + * @retval None + */ +__STATIC_INLINE void LL_OPAMP_SetCommonPowerRange(OPAMP_Common_TypeDef *OPAMPxy_COMMON, uint32_t PowerRange) +{ + MODIFY_REG(OPAMP->CSR, OPAMP_CSR_AOP_RANGE, PowerRange); +} + +/** + * @brief Get OPAMP power range. + * @note The OPAMP power range applies to several OPAMP instances + * (if several OPAMP instances available on the selected device). + * @rmtoll CSR AOP_RANGE LL_OPAMP_GetCommonPowerRange + * @param OPAMPxy_COMMON OPAMP common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_OPAMP_COMMON_INSTANCE() ) + * @retval Returned value can be one of the following values: + * @arg @ref LL_OPAMP_POWERSUPPLY_RANGE_LOW + * @arg @ref LL_OPAMP_POWERSUPPLY_RANGE_HIGH + */ +__STATIC_INLINE uint32_t LL_OPAMP_GetCommonPowerRange(OPAMP_Common_TypeDef *OPAMPxy_COMMON) +{ + return (uint32_t)(READ_BIT(OPAMP->CSR, OPAMP_CSR_AOP_RANGE)); +} + +/** + * @} + */ + +/** @defgroup OPAMP_LL_EF_CONFIGURATION_OPAMP_INSTANCE Configuration of OPAMP hierarchical scope: OPAMP instance + * @{ + */ + +/** + * @brief Set OPAMP power mode. + * @note The OPAMP must be disabled to change this configuration. + * @rmtoll CSR OPA1LPM LL_OPAMP_SetPowerMode\n + * CSR OPA2LPM LL_OPAMP_SetPowerMode\n + * CSR OPA3LPM LL_OPAMP_SetPowerMode + * @param OPAMPx OPAMP instance + * @param PowerMode This parameter can be one of the following values: + * @arg @ref LL_OPAMP_POWERMODE_NORMAL + * @arg @ref LL_OPAMP_POWERMODE_LOWPOWER + * @retval None + */ +__STATIC_INLINE void LL_OPAMP_SetPowerMode(OPAMP_TypeDef *OPAMPx, uint32_t PowerMode) +{ + MODIFY_REG(OPAMP->CSR, + OPAMP_CSR_OPA1LPM << __OPAMP_INSTANCE_BITOFFSET(OPAMPx), + (PowerMode & OPAMP_POWERMODE_CSR_BIT_MASK) << __OPAMP_INSTANCE_BITOFFSET(OPAMPx)); +} + +/** + * @brief Get OPAMP power mode. + * @rmtoll CSR OPA1LPM LL_OPAMP_GetPowerMode\n + * CSR OPA2LPM LL_OPAMP_GetPowerMode\n + * CSR OPA3LPM LL_OPAMP_GetPowerMode + * @param OPAMPx OPAMP instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_OPAMP_POWERMODE_NORMAL + * @arg @ref LL_OPAMP_POWERMODE_LOWPOWER + */ +__STATIC_INLINE uint32_t LL_OPAMP_GetPowerMode(OPAMP_TypeDef *OPAMPx) +{ + register uint32_t power_mode = (READ_BIT(OPAMP->CSR, OPAMP_CSR_OPA1LPM << __OPAMP_INSTANCE_BITOFFSET(OPAMPx))); + + /* Shift variable to position corresponding to bitfield of OPAMP1 */ + power_mode >>= __OPAMP_INSTANCE_BITOFFSET(OPAMPx); + + /* Construct data corresponding to literal LL_OPAMP_POWERMODE_x */ + return (uint32_t)(power_mode | (power_mode >> (POSITION_VAL(OPAMP_CSR_OPA1LPM)))); +} + +/** + * @brief Set OPAMP mode calibration or functional. + * @note OPAMP mode corresponds to functional or calibration mode: + * - functional mode: OPAMP operation in standalone, follower, ... + * Set functional mode using function + * @ref LL_OPAMP_SetFunctionalMode(). + * - calibration mode: offset calibration of the selected + * transistors differential pair NMOS or PMOS. + * @note On this STM32 serie, entering in calibration mode makes + * loosing OPAMP internal switches configuration. + * Therefore, when going back to functional mode, + * functional mode must be set again using + * @ref LL_OPAMP_SetFunctionalMode(). + * @rmtoll CSR S3SELx LL_OPAMP_SetMode\n + * @rmtoll CSR S4SELx LL_OPAMP_SetMode\n + * @rmtoll CSR S5SELx LL_OPAMP_SetMode\n + * @rmtoll CSR S6SELx LL_OPAMP_SetMode\n + * @rmtoll CSR S7SEL2 LL_OPAMP_SetMode + * @param OPAMPx OPAMP instance + * @param Mode This parameter can be one of the following values: + * @arg @ref LL_OPAMP_MODE_FUNCTIONAL + * @arg @ref LL_OPAMP_MODE_CALIBRATION + * @retval None + */ +__STATIC_INLINE void LL_OPAMP_SetMode(OPAMP_TypeDef *OPAMPx, uint32_t Mode) +{ + CLEAR_BIT(OPAMP->CSR, + ((Mode & ~OPAMP_CSR_S7SEL2) << __OPAMP_INSTANCE_BITOFFSET(OPAMPx)) | ((Mode & OPAMP_CSR_S7SEL2) * __OPAMP_IS_INSTANCE_OPAMP2(OPAMPx))); +} + +/** + * @brief Get OPAMP mode calibration or functional. + * @note OPAMP mode corresponds to functional or calibration mode: + * - functional mode: OPAMP operation in standalone, follower, ... + * Set functional mode using function + * @ref LL_OPAMP_SetFunctionalMode(). + * - calibration mode: offset calibration of the selected + * transistors differential pair NMOS or PMOS. + * @rmtoll CSR S3SELx LL_OPAMP_SetMode\n + * @rmtoll CSR S4SELx LL_OPAMP_SetMode\n + * @rmtoll CSR S5SELx LL_OPAMP_SetMode\n + * @rmtoll CSR S6SELx LL_OPAMP_SetMode\n + * @rmtoll CSR S7SEL2 LL_OPAMP_SetMode + * @param OPAMPx OPAMP instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_OPAMP_MODE_FUNCTIONAL + * @arg @ref LL_OPAMP_MODE_CALIBRATION + */ +__STATIC_INLINE uint32_t LL_OPAMP_GetMode(OPAMP_TypeDef *OPAMPx) +{ + return (uint32_t)(((READ_BIT(OPAMP->CSR, + ((LL_OPAMP_MODE_CALIBRATION & ~OPAMP_CSR_S7SEL2) << __OPAMP_INSTANCE_BITOFFSET(OPAMPx)) | (OPAMP_CSR_S7SEL2 * __OPAMP_IS_INSTANCE_OPAMP2(OPAMPx))) + ) == 0U) * LL_OPAMP_MODE_CALIBRATION); +} + +/** + * @brief Set OPAMP functional mode by setting internal connections. + * OPAMP operation in standalone, follower, ... + * @note This function reset bit of calibration mode to ensure + * to be in functional mode, in order to have OPAMP parameters + * (inputs selection, ...) set with the corresponding OPAMP mode + * to be effective. + * @rmtoll CSR S3SELx LL_OPAMP_SetFunctionalMode + * @param OPAMPx OPAMP instance + * @param FunctionalMode This parameter can be one of the following values: + * @arg @ref LL_OPAMP_MODE_STANDALONE + * @arg @ref LL_OPAMP_MODE_FOLLOWER + * @retval None + */ +__STATIC_INLINE void LL_OPAMP_SetFunctionalMode(OPAMP_TypeDef *OPAMPx, uint32_t FunctionalMode) +{ + /* Note: Bits OPAMP_CSR_OPAxCAL_y reset to ensure to be in functional mode */ + MODIFY_REG(OPAMP->CSR, + (OPAMP_CSR_S3SEL1 | OPAMP_CSR_OPA1CAL_H | OPAMP_CSR_OPA1CAL_L) << __OPAMP_INSTANCE_BITOFFSET(OPAMPx), + FunctionalMode << __OPAMP_INSTANCE_BITOFFSET(OPAMPx)); +} + +/** + * @brief Get OPAMP functional mode from setting of internal connections. + * OPAMP operation in standalone, follower, ... + * @rmtoll CSR S3SELx LL_OPAMP_GetFunctionalMode + * @param OPAMPx OPAMP instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_OPAMP_MODE_STANDALONE + * @arg @ref LL_OPAMP_MODE_FOLLOWER + */ +__STATIC_INLINE uint32_t LL_OPAMP_GetFunctionalMode(OPAMP_TypeDef *OPAMPx) +{ + return (uint32_t)(READ_BIT(OPAMP->CSR, OPAMP_CSR_S3SEL1 << __OPAMP_INSTANCE_BITOFFSET(OPAMPx)) + >> __OPAMP_INSTANCE_BITOFFSET(OPAMPx) + ); +} + +/** + * @} + */ + +/** @defgroup OPAMP_LL_EF_CONFIGURATION_INPUTS Configuration of OPAMP inputs + * @{ + */ + +/** + * @brief Set OPAMP non-inverting input connection. + * @rmtoll CSR S5SELx LL_OPAMP_SetInputNonInverting\n + * @rmtoll CSR S6SELx LL_OPAMP_SetInputNonInverting\n + * @rmtoll CSR S7SEL2 LL_OPAMP_SetInputNonInverting + * @param OPAMPx OPAMP instance + * @param InputNonInverting This parameter can be one of the following values: + * @arg @ref LL_OPAMP_INPUT_NONINVERT_IO0 + * @arg @ref LL_OPAMP_INPUT_NONINV_DAC1_CH1 (1) + * @arg @ref LL_OPAMP_INPUT_NONINV_DAC1_CH2 (2) + * + * (1) Parameter specific to OPAMP instances: OPAMP1, OPAMP2.\n + * (2) Parameter specific to OPAMP instances: OPAMP2, OPAMP3. + * @retval None + */ +__STATIC_INLINE void LL_OPAMP_SetInputNonInverting(OPAMP_TypeDef *OPAMPx, uint32_t InputNonInverting) +{ + MODIFY_REG(OPAMP->CSR, + ((OPAMP_CSR_S5SEL1 | OPAMP_CSR_S6SEL1) << __OPAMP_INSTANCE_BITOFFSET(OPAMPx)) | (OPAMP_CSR_S7SEL2 * __OPAMP_IS_INSTANCE_OPAMP2(OPAMPx)), + (InputNonInverting << __OPAMP_INSTANCE_BITOFFSET(OPAMPx)) | ((InputNonInverting & OPAMP_CSR_S7SEL2) * __OPAMP_IS_INSTANCE_OPAMP2(OPAMPx)) + ); +} + +/** + * @brief Get OPAMP non-inverting input connection. + * @rmtoll CSR S5SELx LL_OPAMP_GetInputNonInverting\n + * @rmtoll CSR S6SELx LL_OPAMP_GetInputNonInverting\n + * @rmtoll CSR S7SEL2 LL_OPAMP_GetInputNonInverting + * @param OPAMPx OPAMP instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_OPAMP_INPUT_NONINVERT_IO0 + * @arg @ref LL_OPAMP_INPUT_NONINV_DAC1_CH1 (1) + * @arg @ref LL_OPAMP_INPUT_NONINV_DAC1_CH2 (2) + * + * (1) Parameter specific to OPAMP instances: OPAMP1, OPAMP2.\n + * (2) Parameter specific to OPAMP instances: OPAMP2, OPAMP3. + */ +__STATIC_INLINE uint32_t LL_OPAMP_GetInputNonInverting(OPAMP_TypeDef *OPAMPx) +{ + register uint32_t input_non_inverting_opamp_x = READ_BIT(OPAMP->CSR, + (OPAMP_CSR_S5SEL1 | OPAMP_CSR_S6SEL1) << __OPAMP_INSTANCE_BITOFFSET(OPAMPx) + | (OPAMP_CSR_S7SEL2 * __OPAMP_IS_INSTANCE_OPAMP2(OPAMPx)) + ); + + return (((input_non_inverting_opamp_x & ~OPAMP_CSR_S7SEL2) >> __OPAMP_INSTANCE_BITOFFSET(OPAMPx)) | (input_non_inverting_opamp_x & OPAMP_CSR_S7SEL2)); +} + +/** + * @brief Set OPAMP inverting input connection. + * @note OPAMP inverting input is used with OPAMP in mode standalone. + * Otherwise (OPAMP in mode follower), OPAMP inverting input + * is not used (not connected to GPIO pin). + * @rmtoll CSR S4SELx LL_OPAMP_SetInputInverting\n + * @rmtoll CSR ANAWSELx LL_OPAMP_SetInputInverting + * @param OPAMPx OPAMP instance + * @param InputInverting This parameter can be one of the following values: + * @arg @ref LL_OPAMP_INPUT_INVERT_IO0 + * @arg @ref LL_OPAMP_INPUT_INVERT_IO1 (1) + * @arg @ref LL_OPAMP_INPUT_INVERT_CONNECT_NO + * + * (1) Alternative IO pin, not low leakage, availability depends on STM32L1 serie devices packages. + * @retval None + */ +__STATIC_INLINE void LL_OPAMP_SetInputInverting(OPAMP_TypeDef *OPAMPx, uint32_t InputInverting) +{ + MODIFY_REG(OPAMP->CSR, + ((OPAMP_CSR_S4SEL1) << __OPAMP_INSTANCE_BITOFFSET(OPAMPx)) | ((OPAMP_CSR_ANAWSEL1) << __OPAMP_INSTANCE_DECIMAL(OPAMPx)), + ((InputInverting & OPAMP_CSR_S4SEL1) << __OPAMP_INSTANCE_BITOFFSET(OPAMPx)) | ((InputInverting & OPAMP_CSR_ANAWSEL1) << __OPAMP_INSTANCE_DECIMAL(OPAMPx)) + ); +} + +/** + * @brief Get OPAMP inverting input connection. + * @rmtoll CSR S4SELx LL_OPAMP_SetInputInverting\n + * @rmtoll CSR ANAWSELx LL_OPAMP_SetInputInverting + * @param OPAMPx OPAMP instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_OPAMP_INPUT_INVERT_IO0 + * @arg @ref LL_OPAMP_INPUT_INVERT_IO1 (1) + * @arg @ref LL_OPAMP_INPUT_INVERT_CONNECT_NO + * + * (1) Alternative IO pin, not low leakage, availability depends on STM32L1 serie devices packages. + */ +__STATIC_INLINE uint32_t LL_OPAMP_GetInputInverting(OPAMP_TypeDef *OPAMPx) +{ + register uint32_t input_inverting_opamp_x = READ_BIT(OPAMP->CSR, + (OPAMP_CSR_S4SEL1) << __OPAMP_INSTANCE_BITOFFSET(OPAMPx) + | (OPAMP_CSR_ANAWSEL1) << __OPAMP_INSTANCE_DECIMAL(OPAMPx) + ); + +#if defined(OPAMP3) + return ( ((input_inverting_opamp_x & (OPAMP_CSR_S4SEL1 | OPAMP_CSR_S4SEL2 | OPAMP_CSR_S4SEL3)) >> __OPAMP_INSTANCE_BITOFFSET(OPAMPx)) + | ((input_inverting_opamp_x & (OPAMP_CSR_ANAWSEL1 | OPAMP_CSR_ANAWSEL2 | OPAMP_CSR_ANAWSEL3)) >> __OPAMP_INSTANCE_DECIMAL(OPAMPx))); +#else + return ( ((input_inverting_opamp_x & (OPAMP_CSR_S4SEL1 | OPAMP_CSR_S4SEL2)) >> __OPAMP_INSTANCE_BITOFFSET(OPAMPx)) + | ((input_inverting_opamp_x & (OPAMP_CSR_ANAWSEL1 | OPAMP_CSR_ANAWSEL2)) >> __OPAMP_INSTANCE_DECIMAL(OPAMPx))); +#endif +} + +/** + * @} + */ + +/** @defgroup OPAMP_LL_EF_OPAMP_TRIMMING Configuration and operation of OPAMP trimming + * @{ + */ + +/** + * @brief Set OPAMP trimming mode. + * @note The OPAMP trimming mode applies to several OPAMP instances + * (if several OPAMP instances available on the selected device). + * @rmtoll OTR OT_USER LL_OPAMP_SetCommonTrimmingMode + * @param OPAMPxy_COMMON OPAMP common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_OPAMP_COMMON_INSTANCE() ) + * @param TrimmingMode This parameter can be one of the following values: + * @arg @ref LL_OPAMP_TRIMMING_FACTORY + * @arg @ref LL_OPAMP_TRIMMING_USER + * @retval None + */ +__STATIC_INLINE void LL_OPAMP_SetCommonTrimmingMode(OPAMP_Common_TypeDef *OPAMPxy_COMMON, uint32_t TrimmingMode) +{ + /* Note: On STM32L1 serie, OPAMP trimming mode bit "OPAMP_OTR_OT_USER" is */ + /* write only, cannot be read. */ + MODIFY_REG(OPAMPxy_COMMON->OTR, + OPAMP_OTR_OT_USER, + TrimmingMode); +} + +/** + * @brief Get OPAMP trimming mode. + * @note The OPAMP trimming mode applies to several OPAMP instances + * (if several OPAMP instances available on the selected device). + * @rmtoll OTR OT_USER LL_OPAMP_GetCommonTrimmingMode + * @param OPAMPxy_COMMON OPAMP common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_OPAMP_COMMON_INSTANCE() ) + * @retval Returned value can be one of the following values: + * @arg @ref LL_OPAMP_TRIMMING_FACTORY + * @arg @ref LL_OPAMP_TRIMMING_USER + */ +__STATIC_INLINE uint32_t LL_OPAMP_GetCommonTrimmingMode(OPAMP_Common_TypeDef *OPAMPxy_COMMON) +{ + return (uint32_t)(READ_BIT(OPAMPxy_COMMON->OTR, OPAMP_OTR_OT_USER)); +} + +/** + * @brief Set OPAMP offset to calibrate the selected transistors + * differential pair NMOS or PMOS. + * @note Preliminarily, OPAMP must be set in mode calibration + * using function @ref LL_OPAMP_SetMode(). + * @rmtoll CSR OPA1CAL_H LL_OPAMP_SetCalibrationSelection\n + * CSR OPA1CAL_L LL_OPAMP_SetCalibrationSelection + * @param OPAMPx OPAMP instance + * @param TransistorsDiffPair This parameter can be one of the following values: + * @arg @ref LL_OPAMP_TRIMMING_NMOS + * @arg @ref LL_OPAMP_TRIMMING_PMOS + * @arg @ref LL_OPAMP_TRIMMING_NONE + * @retval None + */ +__STATIC_INLINE void LL_OPAMP_SetCalibrationSelection(OPAMP_TypeDef *OPAMPx, uint32_t TransistorsDiffPair) +{ + /* Parameter used with mask "OPAMP_TRIMMING_SELECT_MASK" because */ + /* containing other bits reserved for other purpose. */ + MODIFY_REG(OPAMP->CSR, + (OPAMP_CSR_OPA1CAL_H | OPAMP_CSR_OPA1CAL_L) << __OPAMP_INSTANCE_BITOFFSET(OPAMPx), + ((TransistorsDiffPair & OPAMP_TRIMMING_SELECT_MASK) >> OPAMP_TRIMMING_SELECT_SW_OFFSET) << __OPAMP_INSTANCE_BITOFFSET(OPAMPx) + ); +} + +/** + * @brief Get OPAMP offset to calibrate the selected transistors + * differential pair NMOS or PMOS. + * @note Preliminarily, OPAMP must be set in mode calibration + * using function @ref LL_OPAMP_SetMode(). + * @rmtoll CSR OPA1CAL_H LL_OPAMP_SetCalibrationSelection\n + * CSR OPA1CAL_L LL_OPAMP_SetCalibrationSelection + * @param OPAMPx OPAMP instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_OPAMP_TRIMMING_NMOS + * @arg @ref LL_OPAMP_TRIMMING_PMOS + * @arg @ref LL_OPAMP_TRIMMING_NONE + */ +__STATIC_INLINE uint32_t LL_OPAMP_GetCalibrationSelection(OPAMP_TypeDef *OPAMPx) +{ + register uint32_t CalibrationSelection = (uint32_t)(READ_BIT(OPAMP->CSR, + (OPAMP_CSR_OPA1CAL_H | OPAMP_CSR_OPA1CAL_L) << __OPAMP_INSTANCE_BITOFFSET(OPAMPx) + ) + >> __OPAMP_INSTANCE_BITOFFSET(OPAMPx) + ); + + return ((CalibrationSelection << OPAMP_TRIMMING_SELECT_SW_OFFSET) | + ((OPAMP_OTR_AO1_OPT_OFFSET_TRIM_LOW) << (OPAMP_OTR_AO1_OPT_OFFSET_TRIM_HIGH_Pos * ((CalibrationSelection & OPAMP_CSR_OPA1CAL_H) != 0U)))); +} + +/** + * @brief Get OPAMP calibration result of toggling output. + * @note This functions returns: + * 0 if OPAMP calibration output is reset + * 1 if OPAMP calibration output is set + * @rmtoll CSR OPAxCALOUT LL_OPAMP_IsCalibrationOutputSet + * @param OPAMPx OPAMP instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_OPAMP_IsCalibrationOutputSet(OPAMP_TypeDef *OPAMPx) +{ + return (READ_BIT(OPAMP->CSR, (OPAMP_CSR_OPA1CALOUT << __OPAMP_INSTANCE_DECIMAL(OPAMPx))) + == (OPAMP_CSR_OPA1CALOUT << __OPAMP_INSTANCE_DECIMAL(OPAMPx))); +} + +/** + * @brief Set OPAMP trimming factor for the selected transistors + * differential pair NMOS or PMOS, corresponding to the selected + * power mode. + * @note On STM32L1 serie, OPAMP trimming mode must be re-configured + * at each update of trimming values in power mode normal. + * Refer to function @ref LL_OPAMP_SetCommonTrimmingMode(). + * @rmtoll OTR AOx_OPT_OFFSET_TRIM_HIGH LL_OPAMP_SetTrimmingValue\n + * OTR AOx_OPT_OFFSET_TRIM_LOW LL_OPAMP_SetTrimmingValue\n + * LPOTR AOx_OPT_OFFSET_TRIM_LP_HIGH LL_OPAMP_SetTrimmingValue\n + * LPOTR AOx_OPT_OFFSET_TRIM_LP_LOW LL_OPAMP_SetTrimmingValue + * @param OPAMPx OPAMP instance + * @param PowerMode This parameter can be one of the following values: + * @arg @ref LL_OPAMP_POWERMODE_NORMAL + * @arg @ref LL_OPAMP_POWERMODE_LOWPOWER + * @param TransistorsDiffPair This parameter can be one of the following values: + * @arg @ref LL_OPAMP_TRIMMING_NMOS + * @arg @ref LL_OPAMP_TRIMMING_PMOS + * @param TrimmingValue 0x00...0x1F + * @retval None + */ +__STATIC_INLINE void LL_OPAMP_SetTrimmingValue(OPAMP_TypeDef* OPAMPx, uint32_t PowerMode, uint32_t TransistorsDiffPair, uint32_t TrimmingValue) +{ + register uint32_t *preg = __OPAMP_PTR_REG_OFFSET(OPAMP->OTR, (PowerMode & OPAMP_POWERMODE_OTR_REGOFFSET_MASK)); + + /* Set bits with position in register depending on parameter */ + /* "TransistorsDiffPair". */ + /* Parameter used with mask "OPAMP_TRIMMING_VALUE_MASK" because */ + /* containing other bits reserved for other purpose. */ + MODIFY_REG(*preg, + (TransistorsDiffPair & OPAMP_TRIMMING_VALUE_MASK) << (OPAMP_OTR_AO2_OPT_OFFSET_TRIM_LOW_Pos * __OPAMP_INSTANCE_DECIMAL(OPAMPx)), + TrimmingValue << (POSITION_VAL(TransistorsDiffPair & OPAMP_TRIMMING_VALUE_MASK) + (OPAMP_OTR_AO2_OPT_OFFSET_TRIM_LOW_Pos * __OPAMP_INSTANCE_DECIMAL(OPAMPx)))); +} + +/** + * @brief Get OPAMP trimming factor for the selected transistors + * differential pair NMOS or PMOS, corresponding to the selected + * power mode. + * @rmtoll OTR AOx_OPT_OFFSET_TRIM_HIGH LL_OPAMP_GetTrimmingValue\n + * OTR AOx_OPT_OFFSET_TRIM_LOW LL_OPAMP_GetTrimmingValue\n + * LPOTR AOx_OPT_OFFSET_TRIM_LP_HIGH LL_OPAMP_GetTrimmingValue\n + * LPOTR AOx_OPT_OFFSET_TRIM_LP_LOW LL_OPAMP_GetTrimmingValue + * @param OPAMPx OPAMP instance + * @param PowerMode This parameter can be one of the following values: + * @arg @ref LL_OPAMP_POWERMODE_NORMAL + * @arg @ref LL_OPAMP_POWERMODE_LOWPOWER + * @param TransistorsDiffPair This parameter can be one of the following values: + * @arg @ref LL_OPAMP_TRIMMING_NMOS + * @arg @ref LL_OPAMP_TRIMMING_PMOS + * @retval 0x0...0x1F + */ +__STATIC_INLINE uint32_t LL_OPAMP_GetTrimmingValue(OPAMP_TypeDef* OPAMPx, uint32_t PowerMode, uint32_t TransistorsDiffPair) +{ + register uint32_t *preg = __OPAMP_PTR_REG_OFFSET(OPAMP->OTR, (PowerMode & OPAMP_POWERMODE_OTR_REGOFFSET_MASK)); + + /* Retrieve bits with position in register depending on parameter */ + /* "TransistorsDiffPair". */ + /* Parameter used with mask "OPAMP_TRIMMING_VALUE_MASK" because */ + /* containing other bits reserved for other purpose. */ + return (uint32_t)(READ_BIT(*preg, (TransistorsDiffPair & OPAMP_TRIMMING_VALUE_MASK) << (OPAMP_OTR_AO2_OPT_OFFSET_TRIM_LOW_Pos * __OPAMP_INSTANCE_DECIMAL(OPAMPx))) + >> (POSITION_VAL(TransistorsDiffPair & OPAMP_TRIMMING_VALUE_MASK) + (OPAMP_OTR_AO2_OPT_OFFSET_TRIM_LOW_Pos * __OPAMP_INSTANCE_DECIMAL(OPAMPx))) + ); +} + +/** + * @} + */ + +/** @defgroup OPAMP_LL_EF_OPERATION Operation on OPAMP instance + * @{ + */ +/** + * @brief Enable OPAMP instance. + * @note After enable from off state, OPAMP requires a delay + * to fullfill wake up time specification. + * Refer to device datasheet, parameter "tWAKEUP". + * @rmtoll CSR OPAxPD LL_OPAMP_Enable + * @param OPAMPx OPAMP instance + * @retval None + */ +__STATIC_INLINE void LL_OPAMP_Enable(OPAMP_TypeDef *OPAMPx) +{ + CLEAR_BIT(OPAMP->CSR, OPAMP_CSR_OPA1PD << __OPAMP_INSTANCE_BITOFFSET(OPAMPx)); +} + +/** + * @brief Disable OPAMP instance. + * @rmtoll CSR OPAxPD LL_OPAMP_Disable + * @param OPAMPx OPAMP instance + * @retval None + */ +__STATIC_INLINE void LL_OPAMP_Disable(OPAMP_TypeDef *OPAMPx) +{ + SET_BIT(OPAMP->CSR, OPAMP_CSR_OPA1PD << __OPAMP_INSTANCE_BITOFFSET(OPAMPx)); +} + +/** + * @brief Get OPAMP instance enable state + * (0: OPAMP is disabled, 1: OPAMP is enabled) + * @rmtoll CSR OPAxPD LL_OPAMP_IsEnabled + * @param OPAMPx OPAMP instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_OPAMP_IsEnabled(OPAMP_TypeDef *OPAMPx) +{ + return (READ_BIT(OPAMP->CSR, OPAMP_CSR_OPA1PD << __OPAMP_INSTANCE_BITOFFSET(OPAMPx)) + != (OPAMP_CSR_OPA1PD << __OPAMP_INSTANCE_BITOFFSET(OPAMPx))); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup OPAMP_LL_EF_Init Initialization and de-initialization functions + * @{ + */ + +ErrorStatus LL_OPAMP_DeInit(OPAMP_TypeDef *OPAMPx); +ErrorStatus LL_OPAMP_Init(OPAMP_TypeDef *OPAMPx, LL_OPAMP_InitTypeDef *OPAMP_InitStruct); +void LL_OPAMP_StructInit(LL_OPAMP_InitTypeDef *OPAMP_InitStruct); + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* OPAMP1 || OPAMP2 || OPAMP3 */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32L1xx_LL_OPAMP_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_ll_pwr.h b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_ll_pwr.h new file mode 100755 index 0000000..5d1609b --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_ll_pwr.h @@ -0,0 +1,740 @@ +/** + ****************************************************************************** + * @file stm32l1xx_ll_pwr.h + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief Header file of PWR LL module. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L1xx_LL_PWR_H +#define __STM32L1xx_LL_PWR_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx.h" + +/** @addtogroup STM32L1xx_LL_Driver + * @{ + */ + +#if defined(PWR) + +/** @defgroup PWR_LL PWR + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ + +/* Private macros ------------------------------------------------------------*/ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup PWR_LL_Exported_Constants PWR Exported Constants + * @{ + */ + +/** @defgroup PWR_LL_EC_CLEAR_FLAG Clear Flags Defines + * @brief Flags defines which can be used with LL_PWR_WriteReg function + * @{ + */ +#define LL_PWR_CR_CSBF PWR_CR_CSBF /*!< Clear standby flag */ +#define LL_PWR_CR_CWUF PWR_CR_CWUF /*!< Clear wakeup flag */ +/** + * @} + */ + +/** @defgroup PWR_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_PWR_ReadReg function + * @{ + */ +#define LL_PWR_CSR_WUF PWR_CSR_WUF /*!< Wakeup flag */ +#define LL_PWR_CSR_SBF PWR_CSR_SBF /*!< Standby flag */ +#if defined (PWR_PVD_SUPPORT) +#define LL_PWR_CSR_PVDO PWR_CSR_PVDO /*!< Power voltage detector output flag */ +#endif +#if defined (PWR_CSR_VREFINTRDYF) +#define LL_PWR_CSR_VREFINTRDYF PWR_CSR_VREFINTRDYF /*!< VREFINT ready flag */ +#endif +#define LL_PWR_CSR_VOSF PWR_CSR_VOSF /*!< Voltage scaling select flag */ +#define LL_PWR_CSR_REGLPF PWR_CSR_REGLPF /*!< Regulator low power flag */ +#define LL_PWR_CSR_EWUP1 PWR_CSR_EWUP1 /*!< Enable WKUP pin 1 */ +#define LL_PWR_CSR_EWUP2 PWR_CSR_EWUP2 /*!< Enable WKUP pin 2 */ +#if defined (PWR_CSR_EWUP3) +#define LL_PWR_CSR_EWUP3 PWR_CSR_EWUP3 /*!< Enable WKUP pin 3 */ +#endif /* PWR_CSR_EWUP3 */ +/** + * @} + */ + +/** @defgroup PWR_LL_EC_REGU_VOLTAGE Regulator Voltage + * @{ + */ +#define LL_PWR_REGU_VOLTAGE_SCALE1 (PWR_CR_VOS_0) /*!< 1.8V (range 1) */ +#define LL_PWR_REGU_VOLTAGE_SCALE2 (PWR_CR_VOS_1) /*!< 1.5V (range 2) */ +#define LL_PWR_REGU_VOLTAGE_SCALE3 (PWR_CR_VOS_0 | PWR_CR_VOS_1) /*!< 1.2V (range 3) */ +/** + * @} + */ + +/** @defgroup PWR_LL_EC_MODE_PWR Mode Power + * @{ + */ +#define LL_PWR_MODE_STOP ((uint32_t)0x00000000U) /*!< Enter Stop mode when the CPU enters deepsleep */ +#define LL_PWR_MODE_STANDBY (PWR_CR_PDDS) /*!< Enter Standby mode when the CPU enters deepsleep */ +/** + * @} + */ + +/** @defgroup PWR_LL_EC_REGU_MODE_LP_MODES Regulator Mode In Low Power Modes + * @{ + */ +#define LL_PWR_REGU_LPMODES_MAIN ((uint32_t)0x00000000U) /*!< Voltage regulator in main mode during deepsleep/sleep/low-power run mode */ +#define LL_PWR_REGU_LPMODES_LOW_POWER (PWR_CR_LPSDSR) /*!< Voltage regulator in low-power mode during deepsleep/sleep/low-power run mode */ +/** + * @} + */ + +#if defined(PWR_CR_LPDS) +/** @defgroup PWR_LL_EC_REGU_MODE_DS_MODE Regulator Mode In Deep Sleep Mode + * @{ + */ +#define LL_PWR_REGU_DSMODE_MAIN ((uint32_t)0x00000000U) /*!< Voltage regulator in main mode during deepsleep mode */ +#define LL_PWR_REGU_DSMODE_LOW_POWER (PWR_CR_LPDS) /*!< Voltage regulator in low-power mode during deepsleep mode */ +/** + * @} + */ +#endif /* PWR_CR_LPDS */ + +#if defined (PWR_PVD_SUPPORT) +/** @defgroup PWR_LL_EC_PVDLEVEL Power Voltage Detector Level + * @{ + */ +#define LL_PWR_PVDLEVEL_0 (PWR_CR_PLS_LEV0) /*!< Voltage threshold detected by PVD 1.9 V */ +#define LL_PWR_PVDLEVEL_1 (PWR_CR_PLS_LEV1) /*!< Voltage threshold detected by PVD 2.1 V */ +#define LL_PWR_PVDLEVEL_2 (PWR_CR_PLS_LEV2) /*!< Voltage threshold detected by PVD 2.3 V */ +#define LL_PWR_PVDLEVEL_3 (PWR_CR_PLS_LEV3) /*!< Voltage threshold detected by PVD 2.5 V */ +#define LL_PWR_PVDLEVEL_4 (PWR_CR_PLS_LEV4) /*!< Voltage threshold detected by PVD 2.7 V */ +#define LL_PWR_PVDLEVEL_5 (PWR_CR_PLS_LEV5) /*!< Voltage threshold detected by PVD 2.9 V */ +#define LL_PWR_PVDLEVEL_6 (PWR_CR_PLS_LEV6) /*!< Voltage threshold detected by PVD 3.1 V */ +#define LL_PWR_PVDLEVEL_7 (PWR_CR_PLS_LEV7) /*!< External input analog voltage (Compare internally to VREFINT) */ +/** + * @} + */ +#endif + +/** @defgroup PWR_LL_EC_WAKEUP_PIN Wakeup Pins +* @{ +*/ +#define LL_PWR_WAKEUP_PIN1 (PWR_CSR_EWUP1) /*!< WKUP pin 1 : PA0 */ +#define LL_PWR_WAKEUP_PIN2 (PWR_CSR_EWUP2) /*!< WKUP pin 2 : PC13 */ +#if defined (PWR_CSR_EWUP3) +#define LL_PWR_WAKEUP_PIN3 (PWR_CSR_EWUP3) /*!< WKUP pin 3 : PE6 or PA2 according to device */ +#endif /* PWR_CSR_EWUP3 */ +/** + * @} + */ + +/** + * @} + */ + + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup PWR_LL_Exported_Macros PWR Exported Macros + * @{ + */ + +/** @defgroup PWR_LL_EM_WRITE_READ Common write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in PWR register + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_PWR_WriteReg(__REG__, __VALUE__) WRITE_REG(PWR->__REG__, (__VALUE__)) + +/** + * @brief Read a value in PWR register + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_PWR_ReadReg(__REG__) READ_REG(PWR->__REG__) +/** + * @} + */ + +/** + * @} + */ + + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup PWR_LL_Exported_Functions PWR Exported Functions + * @{ + */ + +/** @defgroup PWR_LL_EF_Configuration Configuration + * @{ + */ + +/** + * @brief Switch the regulator from main mode to low-power mode + * @rmtoll CR LPRUN LL_PWR_EnableLowPowerRunMode + * @note Remind to set the regulator to low power before enabling + * LowPower run mode (bit @ref LL_PWR_REGU_LPMODES_LOW_POWER). + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableLowPowerRunMode(void) +{ + SET_BIT(PWR->CR, PWR_CR_LPRUN); +} + +/** + * @brief Switch the regulator from low-power mode to main mode + * @rmtoll CR LPRUN LL_PWR_DisableLowPowerRunMode + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableLowPowerRunMode(void) +{ + CLEAR_BIT(PWR->CR, PWR_CR_LPRUN); +} + +/** + * @brief Check if the regulator is in low-power mode + * @rmtoll CR LPRUN LL_PWR_IsEnabledLowPowerRunMode + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledLowPowerRunMode(void) +{ + return (READ_BIT(PWR->CR, PWR_CR_LPRUN) == (PWR_CR_LPRUN)); +} + +/** + * @brief Set voltage regulator to low-power and switch from + * run main mode to run low-power mode. + * @rmtoll CR LPSDSR LL_PWR_EnterLowPowerRunMode\n + * CR LPRUN LL_PWR_EnterLowPowerRunMode + * @note This "high level" function is introduced to provide functional + * compatibility with other families. Notice that the two registers + * have to be written sequentially, so this function is not atomic. + * To assure atomicity you can call separately the following functions: + * - @ref LL_PWR_SetRegulModeLP(@ref LL_PWR_REGU_LPMODES_LOW_POWER); + * - @ref LL_PWR_EnableLowPowerRunMode(); + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnterLowPowerRunMode(void) +{ + SET_BIT(PWR->CR, PWR_CR_LPSDSR); /* => LL_PWR_SetRegulModeLP(LL_PWR_REGU_LPMODES_LOW_POWER) */ + SET_BIT(PWR->CR, PWR_CR_LPRUN); /* => LL_PWR_EnableLowPowerRunMode() */ +} + +/** + * @brief Set voltage regulator to main and switch from + * run main mode to low-power mode. + * @rmtoll CR LPSDSR LL_PWR_ExitLowPowerRunMode\n + * CR LPRUN LL_PWR_ExitLowPowerRunMode + * @note This "high level" function is introduced to provide functional + * compatibility with other families. Notice that the two registers + * have to be written sequentially, so this function is not atomic. + * To assure atomicity you can call separately the following functions: + * - @ref LL_PWR_DisableLowPowerRunMode(); + * - @ref LL_PWR_SetRegulModeLP(@ref LL_PWR_REGU_LPMODES_MAIN); + * @retval None + */ +__STATIC_INLINE void LL_PWR_ExitLowPowerRunMode(void) +{ + CLEAR_BIT(PWR->CR, PWR_CR_LPRUN); /* => LL_PWR_DisableLowPowerRunMode() */ + CLEAR_BIT(PWR->CR, PWR_CR_LPSDSR); /* => LL_PWR_SetRegulModeLP(LL_PWR_REGU_LPMODES_MAIN) */ +} + +/** + * @brief Set the main internal regulator output voltage + * @rmtoll CR VOS LL_PWR_SetRegulVoltageScaling + * @param VoltageScaling This parameter can be one of the following values: + * @arg @ref LL_PWR_REGU_VOLTAGE_SCALE1 + * @arg @ref LL_PWR_REGU_VOLTAGE_SCALE2 + * @arg @ref LL_PWR_REGU_VOLTAGE_SCALE3 + * @retval None + */ +__STATIC_INLINE void LL_PWR_SetRegulVoltageScaling(uint32_t VoltageScaling) +{ + MODIFY_REG(PWR->CR, PWR_CR_VOS, VoltageScaling); +} + +/** + * @brief Get the main internal regulator output voltage + * @rmtoll CR VOS LL_PWR_GetRegulVoltageScaling + * @retval Returned value can be one of the following values: + * @arg @ref LL_PWR_REGU_VOLTAGE_SCALE1 + * @arg @ref LL_PWR_REGU_VOLTAGE_SCALE2 + * @arg @ref LL_PWR_REGU_VOLTAGE_SCALE3 + */ +__STATIC_INLINE uint32_t LL_PWR_GetRegulVoltageScaling(void) +{ + return (uint32_t)(READ_BIT(PWR->CR, PWR_CR_VOS)); +} + +/** + * @brief Enable access to the backup domain + * @rmtoll CR DBP LL_PWR_EnableBkUpAccess + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableBkUpAccess(void) +{ + SET_BIT(PWR->CR, PWR_CR_DBP); +} + +/** + * @brief Disable access to the backup domain + * @rmtoll CR DBP LL_PWR_DisableBkUpAccess + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableBkUpAccess(void) +{ + CLEAR_BIT(PWR->CR, PWR_CR_DBP); +} + +/** + * @brief Check if the backup domain is enabled + * @rmtoll CR DBP LL_PWR_IsEnabledBkUpAccess + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledBkUpAccess(void) +{ + return (READ_BIT(PWR->CR, PWR_CR_DBP) == (PWR_CR_DBP)); +} + +/** + * @brief Set voltage regulator mode during low power modes + * @rmtoll CR LPSDSR LL_PWR_SetRegulModeLP + * @param RegulMode This parameter can be one of the following values: + * @arg @ref LL_PWR_REGU_LPMODES_MAIN + * @arg @ref LL_PWR_REGU_LPMODES_LOW_POWER + * @retval None + */ +__STATIC_INLINE void LL_PWR_SetRegulModeLP(uint32_t RegulMode) +{ + MODIFY_REG(PWR->CR, PWR_CR_LPSDSR, RegulMode); +} + +/** + * @brief Get voltage regulator mode during low power modes + * @rmtoll CR LPSDSR LL_PWR_GetRegulModeLP + * @retval Returned value can be one of the following values: + * @arg @ref LL_PWR_REGU_LPMODES_MAIN + * @arg @ref LL_PWR_REGU_LPMODES_LOW_POWER + */ +__STATIC_INLINE uint32_t LL_PWR_GetRegulModeLP(void) +{ + return (uint32_t)(READ_BIT(PWR->CR, PWR_CR_LPSDSR)); +} + +#if defined(PWR_CR_LPDS) +/** + * @brief Set voltage regulator mode during deep sleep mode + * @rmtoll CR LPDS LL_PWR_SetRegulModeDS + * @param RegulMode This parameter can be one of the following values: + * @arg @ref LL_PWR_REGU_DSMODE_MAIN + * @arg @ref LL_PWR_REGU_DSMODE_LOW_POWER + * @retval None + */ +__STATIC_INLINE void LL_PWR_SetRegulModeDS(uint32_t RegulMode) +{ + MODIFY_REG(PWR->CR, PWR_CR_LPDS, RegulMode); +} + +/** + * @brief Get voltage regulator mode during deep sleep mode + * @rmtoll CR LPDS LL_PWR_GetRegulModeDS + * @retval Returned value can be one of the following values: + * @arg @ref LL_PWR_REGU_DSMODE_MAIN + * @arg @ref LL_PWR_REGU_DSMODE_LOW_POWER + */ +__STATIC_INLINE uint32_t LL_PWR_GetRegulModeDS(void) +{ + return (uint32_t)(READ_BIT(PWR->CR, PWR_CR_LPDS)); +} +#endif /* PWR_CR_LPDS */ + +/** + * @brief Set power down mode when CPU enters deepsleep + * @rmtoll CR PDDS LL_PWR_SetPowerMode + * @param PDMode This parameter can be one of the following values: + * @arg @ref LL_PWR_MODE_STOP + * @arg @ref LL_PWR_MODE_STANDBY + * @note Set the regulator to low power (bit @ref LL_PWR_REGU_LPMODES_LOW_POWER) + * before setting MODE_STOP. If the regulator remains in "main mode", + * it consumes more power without providing any additional feature. + * In MODE_STANDBY the regulator is automatically off. + * @retval None + */ +__STATIC_INLINE void LL_PWR_SetPowerMode(uint32_t PDMode) +{ + MODIFY_REG(PWR->CR, PWR_CR_PDDS, PDMode); +} + +/** + * @brief Get power down mode when CPU enters deepsleep + * @rmtoll CR PDDS LL_PWR_GetPowerMode + * @retval Returned value can be one of the following values: + * @arg @ref LL_PWR_MODE_STOP + * @arg @ref LL_PWR_MODE_STANDBY + */ +__STATIC_INLINE uint32_t LL_PWR_GetPowerMode(void) +{ + return (uint32_t)(READ_BIT(PWR->CR, PWR_CR_PDDS)); +} + +#if defined (PWR_PVD_SUPPORT) +/** + * @brief Configure the voltage threshold detected by the Power Voltage Detector + * @rmtoll CR PLS LL_PWR_SetPVDLevel + * @param PVDLevel This parameter can be one of the following values: + * @arg @ref LL_PWR_PVDLEVEL_0 + * @arg @ref LL_PWR_PVDLEVEL_1 + * @arg @ref LL_PWR_PVDLEVEL_2 + * @arg @ref LL_PWR_PVDLEVEL_3 + * @arg @ref LL_PWR_PVDLEVEL_4 + * @arg @ref LL_PWR_PVDLEVEL_5 + * @arg @ref LL_PWR_PVDLEVEL_6 + * @arg @ref LL_PWR_PVDLEVEL_7 + * @retval None + */ +__STATIC_INLINE void LL_PWR_SetPVDLevel(uint32_t PVDLevel) +{ + MODIFY_REG(PWR->CR, PWR_CR_PLS, PVDLevel); +} + +/** + * @brief Get the voltage threshold detection + * @rmtoll CR PLS LL_PWR_GetPVDLevel + * @retval Returned value can be one of the following values: + * @arg @ref LL_PWR_PVDLEVEL_0 + * @arg @ref LL_PWR_PVDLEVEL_1 + * @arg @ref LL_PWR_PVDLEVEL_2 + * @arg @ref LL_PWR_PVDLEVEL_3 + * @arg @ref LL_PWR_PVDLEVEL_4 + * @arg @ref LL_PWR_PVDLEVEL_5 + * @arg @ref LL_PWR_PVDLEVEL_6 + * @arg @ref LL_PWR_PVDLEVEL_7 + */ +__STATIC_INLINE uint32_t LL_PWR_GetPVDLevel(void) +{ + return (uint32_t)(READ_BIT(PWR->CR, PWR_CR_PLS)); +} + +/** + * @brief Enable Power Voltage Detector + * @rmtoll CR PVDE LL_PWR_EnablePVD + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnablePVD(void) +{ + SET_BIT(PWR->CR, PWR_CR_PVDE); +} + +/** + * @brief Disable Power Voltage Detector + * @rmtoll CR PVDE LL_PWR_DisablePVD + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisablePVD(void) +{ + CLEAR_BIT(PWR->CR, PWR_CR_PVDE); +} + +/** + * @brief Check if Power Voltage Detector is enabled + * @rmtoll CR PVDE LL_PWR_IsEnabledPVD + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledPVD(void) +{ + return (READ_BIT(PWR->CR, PWR_CR_PVDE) == (PWR_CR_PVDE)); +} +#endif + +/** + * @brief Enable the WakeUp PINx functionality + * @rmtoll CSR EWUP1 LL_PWR_EnableWakeUpPin\n + * CSR EWUP2 LL_PWR_EnableWakeUpPin\n + * CSR EWUP3 LL_PWR_EnableWakeUpPin + * @param WakeUpPin This parameter can be one of the following values: + * @arg @ref LL_PWR_WAKEUP_PIN1 + * @arg @ref LL_PWR_WAKEUP_PIN2 + * @arg @ref LL_PWR_WAKEUP_PIN3 (*) + * + * (*) not available on all devices + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableWakeUpPin(uint32_t WakeUpPin) +{ + SET_BIT(PWR->CSR, WakeUpPin); +} + +/** + * @brief Disable the WakeUp PINx functionality + * @rmtoll CSR EWUP1 LL_PWR_DisableWakeUpPin\n + * CSR EWUP2 LL_PWR_DisableWakeUpPin\n + * CSR EWUP3 LL_PWR_DisableWakeUpPin + * @param WakeUpPin This parameter can be one of the following values: + * @arg @ref LL_PWR_WAKEUP_PIN1 + * @arg @ref LL_PWR_WAKEUP_PIN2 + * @arg @ref LL_PWR_WAKEUP_PIN3 (*) + * + * (*) not available on all devices + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableWakeUpPin(uint32_t WakeUpPin) +{ + CLEAR_BIT(PWR->CSR, WakeUpPin); +} + +/** + * @brief Check if the WakeUp PINx functionality is enabled + * @rmtoll CSR EWUP1 LL_PWR_IsEnabledWakeUpPin\n + * CSR EWUP2 LL_PWR_IsEnabledWakeUpPin\n + * CSR EWUP3 LL_PWR_IsEnabledWakeUpPin + * @param WakeUpPin This parameter can be one of the following values: + * @arg @ref LL_PWR_WAKEUP_PIN1 + * @arg @ref LL_PWR_WAKEUP_PIN2 + * @arg @ref LL_PWR_WAKEUP_PIN3 (*) + * + * (*) not available on all devices + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledWakeUpPin(uint32_t WakeUpPin) +{ + return (READ_BIT(PWR->CSR, WakeUpPin) == (WakeUpPin)); +} + +/** + * @brief Enable ultra low-power mode by enabling VREFINT switch off in low-power modes + * @rmtoll CR ULP LL_PWR_EnableUltraLowPower + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableUltraLowPower(void) +{ + SET_BIT(PWR->CR, PWR_CR_ULP); +} + +/** + * @brief Disable ultra low-power mode by disabling VREFINT switch off in low-power modes + * @rmtoll CR ULP LL_PWR_DisableUltraLowPower + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableUltraLowPower(void) +{ + CLEAR_BIT(PWR->CR, PWR_CR_ULP); +} + +/** + * @brief Check if ultra low-power mode is enabled by checking if VREFINT switch off in low-power modes is enabled + * @rmtoll CR ULP LL_PWR_IsEnabledUltraLowPower + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledUltraLowPower(void) +{ + return (READ_BIT(PWR->CR, PWR_CR_ULP) == (PWR_CR_ULP)); +} + +/** + * @brief Enable fast wakeup by ignoring VREFINT startup time when exiting from low-power mode + * @rmtoll CR FWU LL_PWR_EnableFastWakeUp + * @note Works in conjunction with ultra low power mode. + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableFastWakeUp(void) +{ + SET_BIT(PWR->CR, PWR_CR_FWU); +} + +/** + * @brief Disable fast wakeup by waiting VREFINT startup time when exiting from low-power mode + * @rmtoll CR FWU LL_PWR_DisableFastWakeUp + * @note Works in conjunction with ultra low power mode. + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableFastWakeUp(void) +{ + CLEAR_BIT(PWR->CR, PWR_CR_FWU); +} + +/** + * @brief Check if fast wakeup is enabled by checking if VREFINT startup time when exiting from low-power mode is ignored + * @rmtoll CR FWU LL_PWR_IsEnabledFastWakeUp + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledFastWakeUp(void) +{ + return (READ_BIT(PWR->CR, PWR_CR_FWU) == (PWR_CR_FWU)); +} + +/** + * @} + */ + +/** @defgroup PWR_LL_EF_FLAG_Management FLAG_Management + * @{ + */ + +/** + * @brief Get Wake-up Flag + * @rmtoll CSR WUF LL_PWR_IsActiveFlag_WU + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WU(void) +{ + return (READ_BIT(PWR->CSR, PWR_CSR_WUF) == (PWR_CSR_WUF)); +} + +/** + * @brief Get Standby Flag + * @rmtoll CSR SBF LL_PWR_IsActiveFlag_SB + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_SB(void) +{ + return (READ_BIT(PWR->CSR, PWR_CSR_SBF) == (PWR_CSR_SBF)); +} + +#if defined (PWR_PVD_SUPPORT) +/** + * @brief Indicate whether VDD voltage is below the selected PVD threshold + * @rmtoll CSR PVDO LL_PWR_IsActiveFlag_PVDO + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_PVDO(void) +{ + return (READ_BIT(PWR->CSR, PWR_CSR_PVDO) == (PWR_CSR_PVDO)); +} +#endif + +#if defined (PWR_CSR_VREFINTRDYF) +/** + * @brief Get Internal Reference VrefInt Flag + * @rmtoll CSR VREFINTRDYF LL_PWR_IsActiveFlag_VREFINTRDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_VREFINTRDY(void) +{ + return (READ_BIT(PWR->CSR, PWR_CSR_VREFINTRDYF) == (PWR_CSR_VREFINTRDYF)); +} +#endif + +/** + * @brief Indicate whether the regulator is ready in the selected voltage range or if its output voltage is still changing to the required voltage level + * @rmtoll CSR VOSF LL_PWR_IsActiveFlag_VOSF + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_VOSF(void) +{ + return (READ_BIT(PWR->CSR, PWR_CSR_VOSF) == (PWR_CSR_VOSF)); +} + +/** + * @brief Indicate whether the regulator is ready in main mode or is in low-power mode + * @rmtoll CSR REGLPF LL_PWR_IsActiveFlag_REGLPF + * @note Take care, return value "0" means the regulator is ready. Return value "1" means the output voltage range is still changing. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_REGLPF(void) +{ + return (READ_BIT(PWR->CSR, PWR_CSR_REGLPF) == (PWR_CSR_REGLPF)); +} + +/** + * @brief Clear Standby Flag + * @rmtoll CR CSBF LL_PWR_ClearFlag_SB + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_SB(void) +{ + SET_BIT(PWR->CR, PWR_CR_CSBF); +} + +/** + * @brief Clear Wake-up Flags + * @rmtoll CR CWUF LL_PWR_ClearFlag_WU + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_WU(void) +{ + SET_BIT(PWR->CR, PWR_CR_CWUF); +} + + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup PWR_LL_EF_Init De-initialization function + * @{ + */ +ErrorStatus LL_PWR_DeInit(void); +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined(PWR) */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32L1xx_LL_PWR_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_ll_rcc.h b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_ll_rcc.h new file mode 100755 index 0000000..84ea634 --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_ll_rcc.h @@ -0,0 +1,1831 @@ +/** + ****************************************************************************** + * @file stm32l1xx_ll_rcc.h + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief Header file of RCC LL module. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L1xx_LL_RCC_H +#define __STM32L1xx_LL_RCC_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx.h" + +/** @addtogroup STM32L1xx_LL_Driver + * @{ + */ + +#if defined(RCC) + +/** @defgroup RCC_LL RCC + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/** @defgroup RCC_LL_Private_Variables RCC Private Variables + * @{ + */ + +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup RCC_LL_Private_Constants RCC Private Constants + * @{ + */ +/* Defines used for the bit position in the register and perform offsets*/ +#define RCC_POSITION_HPRE (uint32_t)POSITION_VAL(RCC_CFGR_HPRE) /*!< field position in register RCC_CFGR */ +#define RCC_POSITION_PPRE1 (uint32_t)POSITION_VAL(RCC_CFGR_PPRE1) /*!< field position in register RCC_CFGR */ +#define RCC_POSITION_PPRE2 (uint32_t)POSITION_VAL(RCC_CFGR_PPRE2) /*!< field position in register RCC_CFGR */ +#define RCC_POSITION_HSICAL (uint32_t)POSITION_VAL(RCC_ICSCR_HSICAL) /*!< field position in register RCC_ICSCR */ +#define RCC_POSITION_HSITRIM (uint32_t)POSITION_VAL(RCC_ICSCR_HSITRIM) /*!< field position in register RCC_ICSCR */ +#define RCC_POSITION_MSICAL (uint32_t)POSITION_VAL(RCC_ICSCR_MSICAL) /*!< field position in register RCC_ICSCR */ +#define RCC_POSITION_MSITRIM (uint32_t)POSITION_VAL(RCC_ICSCR_MSITRIM) /*!< field position in register RCC_ICSCR */ +#define RCC_POSITION_MSIRANGE (uint32_t)POSITION_VAL(RCC_ICSCR_MSIRANGE) /*!< field position in register RCC_ICSCR */ +#define RCC_POSITION_PLLMUL (uint32_t)POSITION_VAL(RCC_CFGR_PLLMUL) /*!< field position in register RCC_CFGR */ +#define RCC_POSITION_PLLDIV (uint32_t)POSITION_VAL(RCC_CFGR_PLLDIV) /*!< field position in register RCC_CFGR */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup RCC_LL_Exported_Types RCC Exported Types + * @{ + */ + +/** @defgroup LL_ES_CLOCK_FREQ Clocks Frequency Structure + * @{ + */ + +/** + * @brief RCC Clocks Frequency Structure + */ +typedef struct +{ + uint32_t SYSCLK_Frequency; /*!< SYSCLK clock frequency */ + uint32_t HCLK_Frequency; /*!< HCLK clock frequency */ + uint32_t PCLK1_Frequency; /*!< PCLK1 clock frequency */ + uint32_t PCLK2_Frequency; /*!< PCLK2 clock frequency */ +} LL_RCC_ClocksTypeDef; + +/** + * @} + */ + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup RCC_LL_Exported_Constants RCC Exported Constants + * @{ + */ + +/** @defgroup RCC_LL_EC_OSC_VALUES Oscillator Values adaptation + * @brief Defines used to adapt values of different oscillators + * @note These values could be modified in the user environment according to + * HW set-up. + * @{ + */ +#if !defined (HSE_VALUE) +#define HSE_VALUE ((uint32_t)8000000U) /*!< Value of the HSE oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (HSI_VALUE) +#define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the HSI oscillator in Hz */ +#endif /* HSI_VALUE */ + +#if !defined (LSE_VALUE) +#define LSE_VALUE ((uint32_t)32768U) /*!< Value of the LSE oscillator in Hz */ +#endif /* LSE_VALUE */ + +#if !defined (LSI_VALUE) +#define LSI_VALUE ((uint32_t)32000U) /*!< Value of the LSI oscillator in Hz */ +#endif /* LSI_VALUE */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_CLEAR_FLAG Clear Flags Defines + * @brief Flags defines which can be used with LL_RCC_WriteReg function + * @{ + */ +#define LL_RCC_CIR_LSIRDYC RCC_CIR_LSIRDYC /*!< LSI Ready Interrupt Clear */ +#define LL_RCC_CIR_LSERDYC RCC_CIR_LSERDYC /*!< LSE Ready Interrupt Clear */ +#define LL_RCC_CIR_HSIRDYC RCC_CIR_HSIRDYC /*!< HSI Ready Interrupt Clear */ +#define LL_RCC_CIR_HSERDYC RCC_CIR_HSERDYC /*!< HSE Ready Interrupt Clear */ +#define LL_RCC_CIR_PLLRDYC RCC_CIR_PLLRDYC /*!< PLL Ready Interrupt Clear */ +#define LL_RCC_CIR_MSIRDYC RCC_CIR_MSIRDYC /*!< MSI Ready Interrupt Clear */ +#if defined(RCC_LSECSS_SUPPORT) +#define LL_RCC_CIR_LSECSSC RCC_CIR_LSECSSC /*!< LSE Clock Security System Interrupt Clear */ +#endif /* RCC_LSECSS_SUPPORT */ +#define LL_RCC_CIR_CSSC RCC_CIR_CSSC /*!< Clock Security System Interrupt Clear */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_RCC_ReadReg function + * @{ + */ +#define LL_RCC_CIR_LSIRDYF RCC_CIR_LSIRDYF /*!< LSI Ready Interrupt flag */ +#define LL_RCC_CIR_LSERDYF RCC_CIR_LSERDYF /*!< LSE Ready Interrupt flag */ +#define LL_RCC_CIR_HSIRDYF RCC_CIR_HSIRDYF /*!< HSI Ready Interrupt flag */ +#define LL_RCC_CIR_HSERDYF RCC_CIR_HSERDYF /*!< HSE Ready Interrupt flag */ +#define LL_RCC_CIR_PLLRDYF RCC_CIR_PLLRDYF /*!< PLL Ready Interrupt flag */ +#define LL_RCC_CIR_MSIRDYF RCC_CIR_MSIRDYF /*!< MSI Ready Interrupt flag */ +#if defined(RCC_LSECSS_SUPPORT) +#define LL_RCC_CIR_LSECSSF RCC_CIR_LSECSSF /*!< LSE Clock Security System Interrupt flag */ +#endif /* RCC_LSECSS_SUPPORT */ +#define LL_RCC_CIR_CSSF RCC_CIR_CSSF /*!< Clock Security System Interrupt flag */ +#define LL_RCC_CSR_OBLRSTF RCC_CSR_OBLRSTF /*!< OBL reset flag */ +#define LL_RCC_CSR_PINRSTF RCC_CSR_PINRSTF /*!< PIN reset flag */ +#define LL_RCC_CSR_PORRSTF RCC_CSR_PORRSTF /*!< POR/PDR reset flag */ +#define LL_RCC_CSR_SFTRSTF RCC_CSR_SFTRSTF /*!< Software Reset flag */ +#define LL_RCC_CSR_IWDGRSTF RCC_CSR_IWDGRSTF /*!< Independent Watchdog reset flag */ +#define LL_RCC_CSR_WWDGRSTF RCC_CSR_WWDGRSTF /*!< Window watchdog reset flag */ +#define LL_RCC_CSR_LPWRRSTF RCC_CSR_LPWRRSTF /*!< Low-Power reset flag */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_RCC_ReadReg and LL_RCC_WriteReg functions + * @{ + */ +#define LL_RCC_CIR_LSIRDYIE RCC_CIR_LSIRDYIE /*!< LSI Ready Interrupt Enable */ +#define LL_RCC_CIR_LSERDYIE RCC_CIR_LSERDYIE /*!< LSE Ready Interrupt Enable */ +#define LL_RCC_CIR_HSIRDYIE RCC_CIR_HSIRDYIE /*!< HSI Ready Interrupt Enable */ +#define LL_RCC_CIR_HSERDYIE RCC_CIR_HSERDYIE /*!< HSE Ready Interrupt Enable */ +#define LL_RCC_CIR_PLLRDYIE RCC_CIR_PLLRDYIE /*!< PLL Ready Interrupt Enable */ +#define LL_RCC_CIR_MSIRDYIE RCC_CIR_MSIRDYIE /*!< MSI Ready Interrupt Enable */ +#if defined(RCC_LSECSS_SUPPORT) +#define LL_RCC_CIR_LSECSSIE RCC_CIR_LSECSSIE /*!< LSE CSS Interrupt Enable */ +#endif /* RCC_LSECSS_SUPPORT */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_RTC_HSE_DIV RTC HSE Prescaler + * @{ + */ +#define LL_RCC_RTC_HSE_DIV_2 (uint32_t)0x00000000U/*!< HSE is divided by 2 for RTC clock */ +#define LL_RCC_RTC_HSE_DIV_4 RCC_CR_RTCPRE_0 /*!< HSE is divided by 4 for RTC clock */ +#define LL_RCC_RTC_HSE_DIV_8 RCC_CR_RTCPRE_1 /*!< HSE is divided by 8 for RTC clock */ +#define LL_RCC_RTC_HSE_DIV_16 RCC_CR_RTCPRE /*!< HSE is divided by 16 for RTC clock */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_MSIRANGE MSI clock ranges + * @{ + */ +#define LL_RCC_MSIRANGE_0 RCC_ICSCR_MSIRANGE_0 /*!< MSI = 65.536 KHz */ +#define LL_RCC_MSIRANGE_1 RCC_ICSCR_MSIRANGE_1 /*!< MSI = 131.072 KHz*/ +#define LL_RCC_MSIRANGE_2 RCC_ICSCR_MSIRANGE_2 /*!< MSI = 262.144 KHz */ +#define LL_RCC_MSIRANGE_3 RCC_ICSCR_MSIRANGE_3 /*!< MSI = 524.288 KHz */ +#define LL_RCC_MSIRANGE_4 RCC_ICSCR_MSIRANGE_4 /*!< MSI = 1.048 MHz */ +#define LL_RCC_MSIRANGE_5 RCC_ICSCR_MSIRANGE_5 /*!< MSI = 2.097 MHz */ +#define LL_RCC_MSIRANGE_6 RCC_ICSCR_MSIRANGE_6 /*!< MSI = 4.194 MHz */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_SYS_CLKSOURCE System clock switch + * @{ + */ +#define LL_RCC_SYS_CLKSOURCE_MSI RCC_CFGR_SW_MSI /*!< MSI selection as system clock */ +#define LL_RCC_SYS_CLKSOURCE_HSI RCC_CFGR_SW_HSI /*!< HSI selection as system clock */ +#define LL_RCC_SYS_CLKSOURCE_HSE RCC_CFGR_SW_HSE /*!< HSE selection as system clock */ +#define LL_RCC_SYS_CLKSOURCE_PLL RCC_CFGR_SW_PLL /*!< PLL selection as system clock */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_SYS_CLKSOURCE_STATUS System clock switch status + * @{ + */ +#define LL_RCC_SYS_CLKSOURCE_STATUS_MSI RCC_CFGR_SWS_MSI /*!< MSI used as system clock */ +#define LL_RCC_SYS_CLKSOURCE_STATUS_HSI RCC_CFGR_SWS_HSI /*!< HSI used as system clock */ +#define LL_RCC_SYS_CLKSOURCE_STATUS_HSE RCC_CFGR_SWS_HSE /*!< HSE used as system clock */ +#define LL_RCC_SYS_CLKSOURCE_STATUS_PLL RCC_CFGR_SWS_PLL /*!< PLL used as system clock */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_SYSCLK_DIV AHB prescaler + * @{ + */ +#define LL_RCC_SYSCLK_DIV_1 RCC_CFGR_HPRE_DIV1 /*!< SYSCLK not divided */ +#define LL_RCC_SYSCLK_DIV_2 RCC_CFGR_HPRE_DIV2 /*!< SYSCLK divided by 2 */ +#define LL_RCC_SYSCLK_DIV_4 RCC_CFGR_HPRE_DIV4 /*!< SYSCLK divided by 4 */ +#define LL_RCC_SYSCLK_DIV_8 RCC_CFGR_HPRE_DIV8 /*!< SYSCLK divided by 8 */ +#define LL_RCC_SYSCLK_DIV_16 RCC_CFGR_HPRE_DIV16 /*!< SYSCLK divided by 16 */ +#define LL_RCC_SYSCLK_DIV_64 RCC_CFGR_HPRE_DIV64 /*!< SYSCLK divided by 64 */ +#define LL_RCC_SYSCLK_DIV_128 RCC_CFGR_HPRE_DIV128 /*!< SYSCLK divided by 128 */ +#define LL_RCC_SYSCLK_DIV_256 RCC_CFGR_HPRE_DIV256 /*!< SYSCLK divided by 256 */ +#define LL_RCC_SYSCLK_DIV_512 RCC_CFGR_HPRE_DIV512 /*!< SYSCLK divided by 512 */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_APB1_DIV APB low-speed prescaler (APB1) + * @{ + */ +#define LL_RCC_APB1_DIV_1 RCC_CFGR_PPRE1_DIV1 /*!< HCLK not divided */ +#define LL_RCC_APB1_DIV_2 RCC_CFGR_PPRE1_DIV2 /*!< HCLK divided by 2 */ +#define LL_RCC_APB1_DIV_4 RCC_CFGR_PPRE1_DIV4 /*!< HCLK divided by 4 */ +#define LL_RCC_APB1_DIV_8 RCC_CFGR_PPRE1_DIV8 /*!< HCLK divided by 8 */ +#define LL_RCC_APB1_DIV_16 RCC_CFGR_PPRE1_DIV16 /*!< HCLK divided by 16 */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_APB2_DIV APB high-speed prescaler (APB2) + * @{ + */ +#define LL_RCC_APB2_DIV_1 RCC_CFGR_PPRE2_DIV1 /*!< HCLK not divided */ +#define LL_RCC_APB2_DIV_2 RCC_CFGR_PPRE2_DIV2 /*!< HCLK divided by 2 */ +#define LL_RCC_APB2_DIV_4 RCC_CFGR_PPRE2_DIV4 /*!< HCLK divided by 4 */ +#define LL_RCC_APB2_DIV_8 RCC_CFGR_PPRE2_DIV8 /*!< HCLK divided by 8 */ +#define LL_RCC_APB2_DIV_16 RCC_CFGR_PPRE2_DIV16 /*!< HCLK divided by 16 */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_MCO1SOURCE MCO1 SOURCE selection + * @{ + */ +#define LL_RCC_MCO1SOURCE_NOCLOCK RCC_CFGR_MCOSEL_NOCLOCK /*!< MCO output disabled, no clock on MCO */ +#define LL_RCC_MCO1SOURCE_SYSCLK RCC_CFGR_MCOSEL_SYSCLK /*!< SYSCLK selection as MCO source */ +#define LL_RCC_MCO1SOURCE_HSI RCC_CFGR_MCOSEL_HSI /*!< HSI selection as MCO source */ +#define LL_RCC_MCO1SOURCE_MSI RCC_CFGR_MCOSEL_MSI /*!< MSI selection as MCO source */ +#define LL_RCC_MCO1SOURCE_HSE RCC_CFGR_MCOSEL_HSE /*!< HSE selection as MCO source */ +#define LL_RCC_MCO1SOURCE_LSI RCC_CFGR_MCOSEL_LSI /*!< LSI selection as MCO source */ +#define LL_RCC_MCO1SOURCE_LSE RCC_CFGR_MCOSEL_LSE /*!< LSE selection as MCO source */ +#define LL_RCC_MCO1SOURCE_PLLCLK RCC_CFGR_MCOSEL_PLL /*!< PLLCLK selection as MCO source */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_MCO1_DIV MCO1 prescaler + * @{ + */ +#define LL_RCC_MCO1_DIV_1 RCC_CFGR_MCOPRE_DIV1 /*!< MCO Clock divided by 1 */ +#define LL_RCC_MCO1_DIV_2 RCC_CFGR_MCOPRE_DIV2 /*!< MCO Clock divided by 2 */ +#define LL_RCC_MCO1_DIV_4 RCC_CFGR_MCOPRE_DIV4 /*!< MCO Clock divided by 4 */ +#define LL_RCC_MCO1_DIV_8 RCC_CFGR_MCOPRE_DIV8 /*!< MCO Clock divided by 8 */ +#define LL_RCC_MCO1_DIV_16 RCC_CFGR_MCOPRE_DIV16 /*!< MCO Clock divided by 16 */ +/** + * @} + */ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup RCC_LL_EC_PERIPH_FREQUENCY Peripheral clock frequency + * @{ + */ +#define LL_RCC_PERIPH_FREQUENCY_NO (uint32_t)0x00000000U /*!< No clock enabled for the peripheral */ +#define LL_RCC_PERIPH_FREQUENCY_NA (uint32_t)0xFFFFFFFFU /*!< Frequency cannot be provided as external clock */ +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + + + +/** @defgroup RCC_LL_EC_RTC_CLKSOURCE RTC clock source selection + * @{ + */ +#define LL_RCC_RTC_CLKSOURCE_NONE (uint32_t)0x00000000U /*!< No clock used as RTC clock */ +#define LL_RCC_RTC_CLKSOURCE_LSE RCC_CSR_RTCSEL_LSE /*!< LSE oscillator clock used as RTC clock */ +#define LL_RCC_RTC_CLKSOURCE_LSI RCC_CSR_RTCSEL_LSI /*!< LSI oscillator clock used as RTC clock */ +#define LL_RCC_RTC_CLKSOURCE_HSE RCC_CSR_RTCSEL_HSE /*!< HSE oscillator clock divided by a programmable prescaler + (selection through @ref LL_RCC_SetRTC_HSEPrescaler function ) */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_PLL_MUL PLL Multiplicator factor + * @{ + */ +#define LL_RCC_PLL_MUL_3 RCC_CFGR_PLLMUL3 /*!< PLL input clock * 3 */ +#define LL_RCC_PLL_MUL_4 RCC_CFGR_PLLMUL4 /*!< PLL input clock * 4 */ +#define LL_RCC_PLL_MUL_6 RCC_CFGR_PLLMUL6 /*!< PLL input clock * 6 */ +#define LL_RCC_PLL_MUL_8 RCC_CFGR_PLLMUL8 /*!< PLL input clock * 8 */ +#define LL_RCC_PLL_MUL_12 RCC_CFGR_PLLMUL12 /*!< PLL input clock * 12 */ +#define LL_RCC_PLL_MUL_16 RCC_CFGR_PLLMUL16 /*!< PLL input clock * 16 */ +#define LL_RCC_PLL_MUL_24 RCC_CFGR_PLLMUL24 /*!< PLL input clock * 24 */ +#define LL_RCC_PLL_MUL_32 RCC_CFGR_PLLMUL32 /*!< PLL input clock * 32 */ +#define LL_RCC_PLL_MUL_48 RCC_CFGR_PLLMUL48 /*!< PLL input clock * 48 */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_PLL_DIV PLL division factor + * @{ + */ +#define LL_RCC_PLL_DIV_2 RCC_CFGR_PLLDIV2 /*!< PLL clock output = PLLVCO / 2 */ +#define LL_RCC_PLL_DIV_3 RCC_CFGR_PLLDIV3 /*!< PLL clock output = PLLVCO / 3 */ +#define LL_RCC_PLL_DIV_4 RCC_CFGR_PLLDIV4 /*!< PLL clock output = PLLVCO / 4 */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_PLLSOURCE PLL SOURCE + * @{ + */ +#define LL_RCC_PLLSOURCE_HSI RCC_CFGR_PLLSRC_HSI /*!< HSI clock selected as PLL entry clock source */ +#define LL_RCC_PLLSOURCE_HSE RCC_CFGR_PLLSRC_HSE /*!< HSE clock selected as PLL entry clock source */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup RCC_LL_Exported_Macros RCC Exported Macros + * @{ + */ + +/** @defgroup RCC_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in RCC register + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_RCC_WriteReg(__REG__, __VALUE__) WRITE_REG(RCC->__REG__, (__VALUE__)) + +/** + * @brief Read a value in RCC register + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_RCC_ReadReg(__REG__) READ_REG(RCC->__REG__) +/** + * @} + */ + +/** @defgroup RCC_LL_EM_CALC_FREQ Calculate frequencies + * @{ + */ + +/** + * @brief Helper macro to calculate the PLLCLK frequency + * @note ex: @ref __LL_RCC_CALC_PLLCLK_FREQ (HSE_VALUE, + * @ref LL_RCC_PLL_GetMultiplicator (), + * @ref LL_RCC_PLL_GetDivider ()); + * @param __INPUTFREQ__ PLL Input frequency (based on MSI/HSE/HSI) + * @param __PLLMUL__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLL_MUL_3 + * @arg @ref LL_RCC_PLL_MUL_4 + * @arg @ref LL_RCC_PLL_MUL_6 + * @arg @ref LL_RCC_PLL_MUL_8 + * @arg @ref LL_RCC_PLL_MUL_12 + * @arg @ref LL_RCC_PLL_MUL_16 + * @arg @ref LL_RCC_PLL_MUL_24 + * @arg @ref LL_RCC_PLL_MUL_32 + * @arg @ref LL_RCC_PLL_MUL_48 + * @param __PLLDIV__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLL_DIV_2 + * @arg @ref LL_RCC_PLL_DIV_3 + * @arg @ref LL_RCC_PLL_DIV_4 + * @retval PLL clock frequency (in Hz) + */ +#define __LL_RCC_CALC_PLLCLK_FREQ(__INPUTFREQ__, __PLLMUL__, __PLLDIV__) ((__INPUTFREQ__) * (PLLMulTable[(__PLLMUL__) >> RCC_POSITION_PLLMUL]) / (((__PLLDIV__) >> RCC_POSITION_PLLDIV)+1U)) + +/** + * @brief Helper macro to calculate the HCLK frequency + * @note: __AHBPRESCALER__ be retrieved by @ref LL_RCC_GetAHBPrescaler + * ex: __LL_RCC_CALC_HCLK_FREQ(LL_RCC_GetAHBPrescaler()) + * @param __SYSCLKFREQ__ SYSCLK frequency (based on MSI/HSE/HSI/PLLCLK) + * @param __AHBPRESCALER__: This parameter can be one of the following values: + * @arg @ref LL_RCC_SYSCLK_DIV_1 + * @arg @ref LL_RCC_SYSCLK_DIV_2 + * @arg @ref LL_RCC_SYSCLK_DIV_4 + * @arg @ref LL_RCC_SYSCLK_DIV_8 + * @arg @ref LL_RCC_SYSCLK_DIV_16 + * @arg @ref LL_RCC_SYSCLK_DIV_64 + * @arg @ref LL_RCC_SYSCLK_DIV_128 + * @arg @ref LL_RCC_SYSCLK_DIV_256 + * @arg @ref LL_RCC_SYSCLK_DIV_512 + * @retval HCLK clock frequency (in Hz) + */ +#define __LL_RCC_CALC_HCLK_FREQ(__SYSCLKFREQ__, __AHBPRESCALER__) ((__SYSCLKFREQ__) >> AHBPrescTable[((__AHBPRESCALER__) & RCC_CFGR_HPRE) >> RCC_POSITION_HPRE]) + +/** + * @brief Helper macro to calculate the PCLK1 frequency (ABP1) + * @note: __APB1PRESCALER__ be retrieved by @ref LL_RCC_GetAPB1Prescaler + * ex: __LL_RCC_CALC_PCLK1_FREQ(LL_RCC_GetAPB1Prescaler()) + * @param __HCLKFREQ__ HCLK frequency + * @param __APB1PRESCALER__: This parameter can be one of the following values: + * @arg @ref LL_RCC_APB1_DIV_1 + * @arg @ref LL_RCC_APB1_DIV_2 + * @arg @ref LL_RCC_APB1_DIV_4 + * @arg @ref LL_RCC_APB1_DIV_8 + * @arg @ref LL_RCC_APB1_DIV_16 + * @retval PCLK1 clock frequency (in Hz) + */ +#define __LL_RCC_CALC_PCLK1_FREQ(__HCLKFREQ__, __APB1PRESCALER__) ((__HCLKFREQ__) >> APBPrescTable[(__APB1PRESCALER__) >> RCC_POSITION_PPRE1]) + +/** + * @brief Helper macro to calculate the PCLK2 frequency (ABP2) + * @note: __APB2PRESCALER__ be retrieved by @ref LL_RCC_GetAPB2Prescaler + * ex: __LL_RCC_CALC_PCLK2_FREQ(LL_RCC_GetAPB2Prescaler()) + * @param __HCLKFREQ__ HCLK frequency + * @param __APB2PRESCALER__: This parameter can be one of the following values: + * @arg @ref LL_RCC_APB2_DIV_1 + * @arg @ref LL_RCC_APB2_DIV_2 + * @arg @ref LL_RCC_APB2_DIV_4 + * @arg @ref LL_RCC_APB2_DIV_8 + * @arg @ref LL_RCC_APB2_DIV_16 + * @retval PCLK2 clock frequency (in Hz) + */ +#define __LL_RCC_CALC_PCLK2_FREQ(__HCLKFREQ__, __APB2PRESCALER__) ((__HCLKFREQ__) >> APBPrescTable[(__APB2PRESCALER__) >> RCC_POSITION_PPRE2]) + +/** + * @brief Helper macro to calculate the MSI frequency (in Hz) + * @note: __MSIRANGE__can be retrieved by @ref LL_RCC_MSI_GetRange + * ex: __LL_RCC_CALC_MSI_FREQ(LL_RCC_MSI_GetRange()) + * @param __MSIRANGE__: This parameter can be one of the following values: + * @arg @ref LL_RCC_MSIRANGE_0 + * @arg @ref LL_RCC_MSIRANGE_1 + * @arg @ref LL_RCC_MSIRANGE_2 + * @arg @ref LL_RCC_MSIRANGE_3 + * @arg @ref LL_RCC_MSIRANGE_4 + * @arg @ref LL_RCC_MSIRANGE_5 + * @arg @ref LL_RCC_MSIRANGE_6 + * @retval MSI clock frequency (in Hz) + */ +#define __LL_RCC_CALC_MSI_FREQ(__MSIRANGE__) ((32768U * ( 1U << (((__MSIRANGE__) >> RCC_POSITION_MSIRANGE) + 1U)))) + +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup RCC_LL_Exported_Functions RCC Exported Functions + * @{ + */ + +/** @defgroup RCC_LL_EF_HSE HSE + * @{ + */ + +/** + * @brief Enable the Clock Security System. + * @rmtoll CR CSSON LL_RCC_HSE_EnableCSS + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSE_EnableCSS(void) +{ + SET_BIT(RCC->CR, RCC_CR_CSSON); +} + +/** + * @brief Disable the Clock Security System. + * @note Cannot be disabled in HSE is ready (only by hardware) + * @rmtoll CR CSSON LL_RCC_HSE_DisableCSS + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSE_DisableCSS(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_CSSON); +} + +/** + * @brief Enable HSE external oscillator (HSE Bypass) + * @rmtoll CR HSEBYP LL_RCC_HSE_EnableBypass + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSE_EnableBypass(void) +{ + SET_BIT(RCC->CR, RCC_CR_HSEBYP); +} + +/** + * @brief Disable HSE external oscillator (HSE Bypass) + * @rmtoll CR HSEBYP LL_RCC_HSE_DisableBypass + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSE_DisableBypass(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP); +} + +/** + * @brief Enable HSE crystal oscillator (HSE ON) + * @rmtoll CR HSEON LL_RCC_HSE_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSE_Enable(void) +{ + SET_BIT(RCC->CR, RCC_CR_HSEON); +} + +/** + * @brief Disable HSE crystal oscillator (HSE ON) + * @rmtoll CR HSEON LL_RCC_HSE_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSE_Disable(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_HSEON); +} + +/** + * @brief Check if HSE oscillator Ready + * @rmtoll CR HSERDY LL_RCC_HSE_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_HSE_IsReady(void) +{ + return (READ_BIT(RCC->CR, RCC_CR_HSERDY) == (RCC_CR_HSERDY)); +} + +/** + * @brief Configure the RTC prescaler (divider) + * @rmtoll CR RTCPRE LL_RCC_SetRTC_HSEPrescaler + * @param Div This parameter can be one of the following values: + * @arg @ref LL_RCC_RTC_HSE_DIV_2 + * @arg @ref LL_RCC_RTC_HSE_DIV_4 + * @arg @ref LL_RCC_RTC_HSE_DIV_8 + * @arg @ref LL_RCC_RTC_HSE_DIV_16 + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetRTC_HSEPrescaler(uint32_t Div) +{ + MODIFY_REG(RCC->CR, RCC_CR_RTCPRE, Div); +} + +/** + * @brief Get the RTC divider (prescaler) + * @rmtoll CR RTCPRE LL_RCC_GetRTC_HSEPrescaler + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_RTC_HSE_DIV_2 + * @arg @ref LL_RCC_RTC_HSE_DIV_4 + * @arg @ref LL_RCC_RTC_HSE_DIV_8 + * @arg @ref LL_RCC_RTC_HSE_DIV_16 + */ +__STATIC_INLINE uint32_t LL_RCC_GetRTC_HSEPrescaler(void) +{ + return (uint32_t)(READ_BIT(RCC->CR, RCC_CR_RTCPRE)); +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_HSI HSI + * @{ + */ + +/** + * @brief Enable HSI oscillator + * @rmtoll CR HSION LL_RCC_HSI_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSI_Enable(void) +{ + SET_BIT(RCC->CR, RCC_CR_HSION); +} + +/** + * @brief Disable HSI oscillator + * @rmtoll CR HSION LL_RCC_HSI_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSI_Disable(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_HSION); +} + +/** + * @brief Check if HSI clock is ready + * @rmtoll CR HSIRDY LL_RCC_HSI_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_HSI_IsReady(void) +{ + return (READ_BIT(RCC->CR, RCC_CR_HSIRDY) == (RCC_CR_HSIRDY)); +} + +/** + * @brief Get HSI Calibration value + * @note When HSITRIM is written, HSICAL is updated with the sum of + * HSITRIM and the factory trim value + * @rmtoll ICSCR HSICAL LL_RCC_HSI_GetCalibration + * @retval Between Min_Data = 0x00 and Max_Data = 0xFF + */ +__STATIC_INLINE uint32_t LL_RCC_HSI_GetCalibration(void) +{ + return (uint32_t)(READ_BIT(RCC->ICSCR, RCC_ICSCR_HSICAL) >> RCC_POSITION_HSICAL); +} + +/** + * @brief Set HSI Calibration trimming + * @note user-programmable trimming value that is added to the HSICAL + * @note Default value is 16, which, when added to the HSICAL value, + * should trim the HSI to 16 MHz +/- 1 % + * @rmtoll ICSCR HSITRIM LL_RCC_HSI_SetCalibTrimming + * @param Value between Min_Data = 0x00 and Max_Data = 0x1F + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSI_SetCalibTrimming(uint32_t Value) +{ + MODIFY_REG(RCC->ICSCR, RCC_ICSCR_HSITRIM, Value << RCC_POSITION_HSITRIM); +} + +/** + * @brief Get HSI Calibration trimming + * @rmtoll ICSCR HSITRIM LL_RCC_HSI_GetCalibTrimming + * @retval Between Min_Data = 0x00 and Max_Data = 0x1F + */ +__STATIC_INLINE uint32_t LL_RCC_HSI_GetCalibTrimming(void) +{ + return (uint32_t)(READ_BIT(RCC->ICSCR, RCC_ICSCR_HSITRIM) >> RCC_POSITION_HSITRIM); +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_LSE LSE + * @{ + */ + +/** + * @brief Enable Low Speed External (LSE) crystal. + * @rmtoll CSR LSEON LL_RCC_LSE_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSE_Enable(void) +{ + SET_BIT(RCC->CSR, RCC_CSR_LSEON); +} + +/** + * @brief Disable Low Speed External (LSE) crystal. + * @rmtoll CSR LSEON LL_RCC_LSE_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSE_Disable(void) +{ + CLEAR_BIT(RCC->CSR, RCC_CSR_LSEON); +} + +/** + * @brief Enable external clock source (LSE bypass). + * @rmtoll CSR LSEBYP LL_RCC_LSE_EnableBypass + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSE_EnableBypass(void) +{ + SET_BIT(RCC->CSR, RCC_CSR_LSEBYP); +} + +/** + * @brief Disable external clock source (LSE bypass). + * @rmtoll CSR LSEBYP LL_RCC_LSE_DisableBypass + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSE_DisableBypass(void) +{ + CLEAR_BIT(RCC->CSR, RCC_CSR_LSEBYP); +} + +#if defined(RCC_LSECSS_SUPPORT) +/** + * @brief Enable Clock security system on LSE. + * @rmtoll CSR LSECSSON LL_RCC_LSE_EnableCSS + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSE_EnableCSS(void) +{ + SET_BIT(RCC->CSR, RCC_CSR_LSECSSON); +} + +/** + * @brief Disable Clock security system on LSE. + * @note Clock security system can be disabled only after a LSE + * failure detection. In that case it MUST be disabled by software. + * @rmtoll CSR LSECSSON LL_RCC_LSE_DisableCSS + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSE_DisableCSS(void) +{ + CLEAR_BIT(RCC->CSR, RCC_CSR_LSECSSON); +} + +#endif /* RCC_LSECSS_SUPPORT */ +/** + * @brief Check if LSE oscillator Ready + * @rmtoll CSR LSERDY LL_RCC_LSE_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_LSE_IsReady(void) +{ + return (READ_BIT(RCC->CSR, RCC_CSR_LSERDY) == (RCC_CSR_LSERDY)); +} + +#if defined(RCC_LSECSS_SUPPORT) +/** + * @brief Check if CSS on LSE failure Detection + * @rmtoll CSR LSECSSD LL_RCC_LSE_IsCSSDetected + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_LSE_IsCSSDetected(void) +{ + return (READ_BIT(RCC->CSR, RCC_CSR_LSECSSD) == (RCC_CSR_LSECSSD)); +} + +#endif /* RCC_LSECSS_SUPPORT */ +/** + * @} + */ + +/** @defgroup RCC_LL_EF_LSI LSI + * @{ + */ + +/** + * @brief Enable LSI Oscillator + * @rmtoll CSR LSION LL_RCC_LSI_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSI_Enable(void) +{ + SET_BIT(RCC->CSR, RCC_CSR_LSION); +} + +/** + * @brief Disable LSI Oscillator + * @rmtoll CSR LSION LL_RCC_LSI_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSI_Disable(void) +{ + CLEAR_BIT(RCC->CSR, RCC_CSR_LSION); +} + +/** + * @brief Check if LSI is Ready + * @rmtoll CSR LSIRDY LL_RCC_LSI_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_LSI_IsReady(void) +{ + return (READ_BIT(RCC->CSR, RCC_CSR_LSIRDY) == (RCC_CSR_LSIRDY)); +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_MSI MSI + * @{ + */ + +/** + * @brief Enable MSI oscillator + * @rmtoll CR MSION LL_RCC_MSI_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_MSI_Enable(void) +{ + SET_BIT(RCC->CR, RCC_CR_MSION); +} + +/** + * @brief Disable MSI oscillator + * @rmtoll CR MSION LL_RCC_MSI_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_MSI_Disable(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_MSION); +} + +/** + * @brief Check if MSI oscillator Ready + * @rmtoll CR MSIRDY LL_RCC_MSI_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_MSI_IsReady(void) +{ + return (READ_BIT(RCC->CR, RCC_CR_MSIRDY) == (RCC_CR_MSIRDY)); +} + +/** + * @brief Configure the Internal Multi Speed oscillator (MSI) clock range in run mode. + * @rmtoll ICSCR MSIRANGE LL_RCC_MSI_SetRange + * @param Range This parameter can be one of the following values: + * @arg @ref LL_RCC_MSIRANGE_0 + * @arg @ref LL_RCC_MSIRANGE_1 + * @arg @ref LL_RCC_MSIRANGE_2 + * @arg @ref LL_RCC_MSIRANGE_3 + * @arg @ref LL_RCC_MSIRANGE_4 + * @arg @ref LL_RCC_MSIRANGE_5 + * @arg @ref LL_RCC_MSIRANGE_6 + * @retval None + */ +__STATIC_INLINE void LL_RCC_MSI_SetRange(uint32_t Range) +{ + MODIFY_REG(RCC->ICSCR, RCC_ICSCR_MSIRANGE, Range); +} + +/** + * @brief Get the Internal Multi Speed oscillator (MSI) clock range in run mode. + * @rmtoll ICSCR MSIRANGE LL_RCC_MSI_GetRange + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_MSIRANGE_0 + * @arg @ref LL_RCC_MSIRANGE_1 + * @arg @ref LL_RCC_MSIRANGE_2 + * @arg @ref LL_RCC_MSIRANGE_3 + * @arg @ref LL_RCC_MSIRANGE_4 + * @arg @ref LL_RCC_MSIRANGE_5 + * @arg @ref LL_RCC_MSIRANGE_6 + */ +__STATIC_INLINE uint32_t LL_RCC_MSI_GetRange(void) +{ + return (uint32_t)(READ_BIT(RCC->ICSCR, RCC_ICSCR_MSIRANGE)); +} + +/** + * @brief Get MSI Calibration value + * @note When MSITRIM is written, MSICAL is updated with the sum of + * MSITRIM and the factory trim value + * @rmtoll ICSCR MSICAL LL_RCC_MSI_GetCalibration + * @retval Between Min_Data = 0x00 and Max_Data = 0xFF + */ +__STATIC_INLINE uint32_t LL_RCC_MSI_GetCalibration(void) +{ + return (uint32_t)(READ_BIT(RCC->ICSCR, RCC_ICSCR_MSICAL) >> RCC_POSITION_MSICAL); +} + +/** + * @brief Set MSI Calibration trimming + * @note user-programmable trimming value that is added to the MSICAL + * @rmtoll ICSCR MSITRIM LL_RCC_MSI_SetCalibTrimming + * @param Value between Min_Data = 0x00 and Max_Data = 0xFF + * @retval None + */ +__STATIC_INLINE void LL_RCC_MSI_SetCalibTrimming(uint32_t Value) +{ + MODIFY_REG(RCC->ICSCR, RCC_ICSCR_MSITRIM, Value << RCC_POSITION_MSITRIM); +} + +/** + * @brief Get MSI Calibration trimming + * @rmtoll ICSCR MSITRIM LL_RCC_MSI_GetCalibTrimming + * @retval Between Min_Data = 0x00 and Max_Data = 0xFF + */ +__STATIC_INLINE uint32_t LL_RCC_MSI_GetCalibTrimming(void) +{ + return (uint32_t)(READ_BIT(RCC->ICSCR, RCC_ICSCR_MSITRIM) >> RCC_POSITION_MSITRIM); +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_System System + * @{ + */ + +/** + * @brief Configure the system clock source + * @rmtoll CFGR SW LL_RCC_SetSysClkSource + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_SYS_CLKSOURCE_MSI + * @arg @ref LL_RCC_SYS_CLKSOURCE_HSI + * @arg @ref LL_RCC_SYS_CLKSOURCE_HSE + * @arg @ref LL_RCC_SYS_CLKSOURCE_PLL + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetSysClkSource(uint32_t Source) +{ + MODIFY_REG(RCC->CFGR, RCC_CFGR_SW, Source); +} + +/** + * @brief Get the system clock source + * @rmtoll CFGR SWS LL_RCC_GetSysClkSource + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_SYS_CLKSOURCE_STATUS_MSI + * @arg @ref LL_RCC_SYS_CLKSOURCE_STATUS_HSI + * @arg @ref LL_RCC_SYS_CLKSOURCE_STATUS_HSE + * @arg @ref LL_RCC_SYS_CLKSOURCE_STATUS_PLL + */ +__STATIC_INLINE uint32_t LL_RCC_GetSysClkSource(void) +{ + return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_SWS)); +} + +/** + * @brief Set AHB prescaler + * @rmtoll CFGR HPRE LL_RCC_SetAHBPrescaler + * @param Prescaler This parameter can be one of the following values: + * @arg @ref LL_RCC_SYSCLK_DIV_1 + * @arg @ref LL_RCC_SYSCLK_DIV_2 + * @arg @ref LL_RCC_SYSCLK_DIV_4 + * @arg @ref LL_RCC_SYSCLK_DIV_8 + * @arg @ref LL_RCC_SYSCLK_DIV_16 + * @arg @ref LL_RCC_SYSCLK_DIV_64 + * @arg @ref LL_RCC_SYSCLK_DIV_128 + * @arg @ref LL_RCC_SYSCLK_DIV_256 + * @arg @ref LL_RCC_SYSCLK_DIV_512 + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetAHBPrescaler(uint32_t Prescaler) +{ + MODIFY_REG(RCC->CFGR, RCC_CFGR_HPRE, Prescaler); +} + +/** + * @brief Set APB1 prescaler + * @rmtoll CFGR PPRE1 LL_RCC_SetAPB1Prescaler + * @param Prescaler This parameter can be one of the following values: + * @arg @ref LL_RCC_APB1_DIV_1 + * @arg @ref LL_RCC_APB1_DIV_2 + * @arg @ref LL_RCC_APB1_DIV_4 + * @arg @ref LL_RCC_APB1_DIV_8 + * @arg @ref LL_RCC_APB1_DIV_16 + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetAPB1Prescaler(uint32_t Prescaler) +{ + MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE1, Prescaler); +} + +/** + * @brief Set APB2 prescaler + * @rmtoll CFGR PPRE2 LL_RCC_SetAPB2Prescaler + * @param Prescaler This parameter can be one of the following values: + * @arg @ref LL_RCC_APB2_DIV_1 + * @arg @ref LL_RCC_APB2_DIV_2 + * @arg @ref LL_RCC_APB2_DIV_4 + * @arg @ref LL_RCC_APB2_DIV_8 + * @arg @ref LL_RCC_APB2_DIV_16 + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetAPB2Prescaler(uint32_t Prescaler) +{ + MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE2, Prescaler); +} + +/** + * @brief Get AHB prescaler + * @rmtoll CFGR HPRE LL_RCC_GetAHBPrescaler + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_SYSCLK_DIV_1 + * @arg @ref LL_RCC_SYSCLK_DIV_2 + * @arg @ref LL_RCC_SYSCLK_DIV_4 + * @arg @ref LL_RCC_SYSCLK_DIV_8 + * @arg @ref LL_RCC_SYSCLK_DIV_16 + * @arg @ref LL_RCC_SYSCLK_DIV_64 + * @arg @ref LL_RCC_SYSCLK_DIV_128 + * @arg @ref LL_RCC_SYSCLK_DIV_256 + * @arg @ref LL_RCC_SYSCLK_DIV_512 + */ +__STATIC_INLINE uint32_t LL_RCC_GetAHBPrescaler(void) +{ + return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_HPRE)); +} + +/** + * @brief Get APB1 prescaler + * @rmtoll CFGR PPRE1 LL_RCC_GetAPB1Prescaler + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_APB1_DIV_1 + * @arg @ref LL_RCC_APB1_DIV_2 + * @arg @ref LL_RCC_APB1_DIV_4 + * @arg @ref LL_RCC_APB1_DIV_8 + * @arg @ref LL_RCC_APB1_DIV_16 + */ +__STATIC_INLINE uint32_t LL_RCC_GetAPB1Prescaler(void) +{ + return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_PPRE1)); +} + +/** + * @brief Get APB2 prescaler + * @rmtoll CFGR PPRE2 LL_RCC_GetAPB2Prescaler + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_APB2_DIV_1 + * @arg @ref LL_RCC_APB2_DIV_2 + * @arg @ref LL_RCC_APB2_DIV_4 + * @arg @ref LL_RCC_APB2_DIV_8 + * @arg @ref LL_RCC_APB2_DIV_16 + */ +__STATIC_INLINE uint32_t LL_RCC_GetAPB2Prescaler(void) +{ + return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_PPRE2)); +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_MCO MCO + * @{ + */ + +/** + * @brief Configure MCOx + * @rmtoll CFGR MCOSEL LL_RCC_ConfigMCO\n + * CFGR MCOPRE LL_RCC_ConfigMCO + * @param MCOxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_MCO1SOURCE_NOCLOCK + * @arg @ref LL_RCC_MCO1SOURCE_SYSCLK + * @arg @ref LL_RCC_MCO1SOURCE_HSI + * @arg @ref LL_RCC_MCO1SOURCE_MSI + * @arg @ref LL_RCC_MCO1SOURCE_HSE + * @arg @ref LL_RCC_MCO1SOURCE_PLLCLK + * @arg @ref LL_RCC_MCO1SOURCE_LSI + * @arg @ref LL_RCC_MCO1SOURCE_LSE + * @param MCOxPrescaler This parameter can be one of the following values: + * @arg @ref LL_RCC_MCO1_DIV_1 + * @arg @ref LL_RCC_MCO1_DIV_2 + * @arg @ref LL_RCC_MCO1_DIV_4 + * @arg @ref LL_RCC_MCO1_DIV_8 + * @arg @ref LL_RCC_MCO1_DIV_16 + * @retval None + */ +__STATIC_INLINE void LL_RCC_ConfigMCO(uint32_t MCOxSource, uint32_t MCOxPrescaler) +{ + MODIFY_REG(RCC->CFGR, RCC_CFGR_MCOSEL | RCC_CFGR_MCOPRE, MCOxSource | MCOxPrescaler); +} + +/** + * @} + */ + + + +/** @defgroup RCC_LL_EF_RTC RTC + * @{ + */ + +/** + * @brief Set RTC Clock Source + * @note Once the RTC clock source has been selected, it cannot be changed any more unless + * the Backup domain is reset, or unless a failure is detected on LSE (LSECSSD is + * set). The RTCRST bit can be used to reset them. + * @rmtoll CSR RTCSEL LL_RCC_SetRTCClockSource + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_RTC_CLKSOURCE_NONE + * @arg @ref LL_RCC_RTC_CLKSOURCE_LSE + * @arg @ref LL_RCC_RTC_CLKSOURCE_LSI + * @arg @ref LL_RCC_RTC_CLKSOURCE_HSE + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetRTCClockSource(uint32_t Source) +{ + MODIFY_REG(RCC->CSR, RCC_CSR_RTCSEL, Source); +} + +/** + * @brief Get RTC Clock Source + * @rmtoll CSR RTCSEL LL_RCC_GetRTCClockSource + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_RTC_CLKSOURCE_NONE + * @arg @ref LL_RCC_RTC_CLKSOURCE_LSE + * @arg @ref LL_RCC_RTC_CLKSOURCE_LSI + * @arg @ref LL_RCC_RTC_CLKSOURCE_HSE + */ +__STATIC_INLINE uint32_t LL_RCC_GetRTCClockSource(void) +{ + return (uint32_t)(READ_BIT(RCC->CSR, RCC_CSR_RTCSEL)); +} + +/** + * @brief Enable RTC + * @rmtoll CSR RTCEN LL_RCC_EnableRTC + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableRTC(void) +{ + SET_BIT(RCC->CSR, RCC_CSR_RTCEN); +} + +/** + * @brief Disable RTC + * @rmtoll CSR RTCEN LL_RCC_DisableRTC + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableRTC(void) +{ + CLEAR_BIT(RCC->CSR, RCC_CSR_RTCEN); +} + +/** + * @brief Check if RTC has been enabled or not + * @rmtoll CSR RTCEN LL_RCC_IsEnabledRTC + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnabledRTC(void) +{ + return (READ_BIT(RCC->CSR, RCC_CSR_RTCEN) == (RCC_CSR_RTCEN)); +} + +/** + * @brief Force the Backup domain reset + * @rmtoll CSR RTCRST LL_RCC_ForceBackupDomainReset + * @retval None + */ +__STATIC_INLINE void LL_RCC_ForceBackupDomainReset(void) +{ + SET_BIT(RCC->CSR, RCC_CSR_RTCRST); +} + +/** + * @brief Release the Backup domain reset + * @rmtoll CSR RTCRST LL_RCC_ReleaseBackupDomainReset + * @retval None + */ +__STATIC_INLINE void LL_RCC_ReleaseBackupDomainReset(void) +{ + CLEAR_BIT(RCC->CSR, RCC_CSR_RTCRST); +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_PLL PLL + * @{ + */ + +/** + * @brief Enable PLL + * @rmtoll CR PLLON LL_RCC_PLL_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_Enable(void) +{ + SET_BIT(RCC->CR, RCC_CR_PLLON); +} + +/** + * @brief Disable PLL + * @note Cannot be disabled if the PLL clock is used as the system clock + * @rmtoll CR PLLON LL_RCC_PLL_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_Disable(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_PLLON); +} + +/** + * @brief Check if PLL Ready + * @rmtoll CR PLLRDY LL_RCC_PLL_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_PLL_IsReady(void) +{ + return (READ_BIT(RCC->CR, RCC_CR_PLLRDY) == (RCC_CR_PLLRDY)); +} + +/** + * @brief Configure PLL used for SYSCLK Domain + * @rmtoll CFGR PLLSRC LL_RCC_PLL_ConfigDomain_SYS\n + * CFGR PLLMUL LL_RCC_PLL_ConfigDomain_SYS\n + * CFGR PLLDIV LL_RCC_PLL_ConfigDomain_SYS + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSOURCE_HSI + * @arg @ref LL_RCC_PLLSOURCE_HSE + * @param PLLMul This parameter can be one of the following values: + * @arg @ref LL_RCC_PLL_MUL_3 + * @arg @ref LL_RCC_PLL_MUL_4 + * @arg @ref LL_RCC_PLL_MUL_6 + * @arg @ref LL_RCC_PLL_MUL_8 + * @arg @ref LL_RCC_PLL_MUL_12 + * @arg @ref LL_RCC_PLL_MUL_16 + * @arg @ref LL_RCC_PLL_MUL_24 + * @arg @ref LL_RCC_PLL_MUL_32 + * @arg @ref LL_RCC_PLL_MUL_48 + * @param PLLDiv This parameter can be one of the following values: + * @arg @ref LL_RCC_PLL_DIV_2 + * @arg @ref LL_RCC_PLL_DIV_3 + * @arg @ref LL_RCC_PLL_DIV_4 + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_ConfigDomain_SYS(uint32_t Source, uint32_t PLLMul, uint32_t PLLDiv) +{ + MODIFY_REG(RCC->CFGR, RCC_CFGR_PLLSRC | RCC_CFGR_PLLMUL | RCC_CFGR_PLLDIV, Source | PLLMul | PLLDiv); +} + +/** + * @brief Get the oscillator used as PLL clock source. + * @rmtoll CFGR PLLSRC LL_RCC_PLL_GetMainSource + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_PLLSOURCE_HSI + * @arg @ref LL_RCC_PLLSOURCE_HSE + */ +__STATIC_INLINE uint32_t LL_RCC_PLL_GetMainSource(void) +{ + return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_PLLSRC)); +} + +/** + * @brief Get PLL multiplication Factor + * @rmtoll CFGR PLLMUL LL_RCC_PLL_GetMultiplicator + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_PLL_MUL_3 + * @arg @ref LL_RCC_PLL_MUL_4 + * @arg @ref LL_RCC_PLL_MUL_6 + * @arg @ref LL_RCC_PLL_MUL_8 + * @arg @ref LL_RCC_PLL_MUL_12 + * @arg @ref LL_RCC_PLL_MUL_16 + * @arg @ref LL_RCC_PLL_MUL_24 + * @arg @ref LL_RCC_PLL_MUL_32 + * @arg @ref LL_RCC_PLL_MUL_48 + */ +__STATIC_INLINE uint32_t LL_RCC_PLL_GetMultiplicator(void) +{ + return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_PLLMUL)); +} + +/** + * @brief Get Division factor for the main PLL and other PLL + * @rmtoll CFGR PLLDIV LL_RCC_PLL_GetDivider + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_PLL_DIV_2 + * @arg @ref LL_RCC_PLL_DIV_3 + * @arg @ref LL_RCC_PLL_DIV_4 + */ +__STATIC_INLINE uint32_t LL_RCC_PLL_GetDivider(void) +{ + return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_PLLDIV)); +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_FLAG_Management FLAG Management + * @{ + */ + +/** + * @brief Clear LSI ready interrupt flag + * @rmtoll CIR LSIRDYC LL_RCC_ClearFlag_LSIRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_LSIRDY(void) +{ + SET_BIT(RCC->CIR, RCC_CIR_LSIRDYC); +} + +/** + * @brief Clear LSE ready interrupt flag + * @rmtoll CIR LSERDYC LL_RCC_ClearFlag_LSERDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_LSERDY(void) +{ + SET_BIT(RCC->CIR, RCC_CIR_LSERDYC); +} + +/** + * @brief Clear MSI ready interrupt flag + * @rmtoll CIR MSIRDYC LL_RCC_ClearFlag_MSIRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_MSIRDY(void) +{ + SET_BIT(RCC->CIR, RCC_CIR_MSIRDYC); +} + +/** + * @brief Clear HSI ready interrupt flag + * @rmtoll CIR HSIRDYC LL_RCC_ClearFlag_HSIRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_HSIRDY(void) +{ + SET_BIT(RCC->CIR, RCC_CIR_HSIRDYC); +} + +/** + * @brief Clear HSE ready interrupt flag + * @rmtoll CIR HSERDYC LL_RCC_ClearFlag_HSERDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_HSERDY(void) +{ + SET_BIT(RCC->CIR, RCC_CIR_HSERDYC); +} + +/** + * @brief Clear PLL ready interrupt flag + * @rmtoll CIR PLLRDYC LL_RCC_ClearFlag_PLLRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_PLLRDY(void) +{ + SET_BIT(RCC->CIR, RCC_CIR_PLLRDYC); +} + +/** + * @brief Clear Clock security system interrupt flag + * @rmtoll CIR CSSC LL_RCC_ClearFlag_HSECSS + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_HSECSS(void) +{ + SET_BIT(RCC->CIR, RCC_CIR_CSSC); +} + +#if defined(RCC_LSECSS_SUPPORT) +/** + * @brief Clear LSE Clock security system interrupt flag + * @rmtoll CIR LSECSSC LL_RCC_ClearFlag_LSECSS + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_LSECSS(void) +{ + SET_BIT(RCC->CIR, RCC_CIR_LSECSSC); +} + +#endif /* RCC_LSECSS_SUPPORT */ +/** + * @brief Check if LSI ready interrupt occurred or not + * @rmtoll CIR LSIRDYF LL_RCC_IsActiveFlag_LSIRDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_LSIRDY(void) +{ + return (READ_BIT(RCC->CIR, RCC_CIR_LSIRDYF) == (RCC_CIR_LSIRDYF)); +} + +/** + * @brief Check if LSE ready interrupt occurred or not + * @rmtoll CIR LSERDYF LL_RCC_IsActiveFlag_LSERDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_LSERDY(void) +{ + return (READ_BIT(RCC->CIR, RCC_CIR_LSERDYF) == (RCC_CIR_LSERDYF)); +} + +/** + * @brief Check if MSI ready interrupt occurred or not + * @rmtoll CIR MSIRDYF LL_RCC_IsActiveFlag_MSIRDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_MSIRDY(void) +{ + return (READ_BIT(RCC->CIR, RCC_CIR_MSIRDYF) == (RCC_CIR_MSIRDYF)); +} + +/** + * @brief Check if HSI ready interrupt occurred or not + * @rmtoll CIR HSIRDYF LL_RCC_IsActiveFlag_HSIRDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_HSIRDY(void) +{ + return (READ_BIT(RCC->CIR, RCC_CIR_HSIRDYF) == (RCC_CIR_HSIRDYF)); +} + +/** + * @brief Check if HSE ready interrupt occurred or not + * @rmtoll CIR HSERDYF LL_RCC_IsActiveFlag_HSERDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_HSERDY(void) +{ + return (READ_BIT(RCC->CIR, RCC_CIR_HSERDYF) == (RCC_CIR_HSERDYF)); +} + +/** + * @brief Check if PLL ready interrupt occurred or not + * @rmtoll CIR PLLRDYF LL_RCC_IsActiveFlag_PLLRDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_PLLRDY(void) +{ + return (READ_BIT(RCC->CIR, RCC_CIR_PLLRDYF) == (RCC_CIR_PLLRDYF)); +} + +/** + * @brief Check if Clock security system interrupt occurred or not + * @rmtoll CIR CSSF LL_RCC_IsActiveFlag_HSECSS + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_HSECSS(void) +{ + return (READ_BIT(RCC->CIR, RCC_CIR_CSSF) == (RCC_CIR_CSSF)); +} + +#if defined(RCC_LSECSS_SUPPORT) +/** + * @brief Check if LSE Clock security system interrupt occurred or not + * @rmtoll CIR LSECSSF LL_RCC_IsActiveFlag_LSECSS + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_LSECSS(void) +{ + return (READ_BIT(RCC->CIR, RCC_CIR_LSECSSF) == (RCC_CIR_LSECSSF)); +} + +#endif /* RCC_LSECSS_SUPPORT */ +/** + * @brief Check if RCC flag Independent Watchdog reset is set or not. + * @rmtoll CSR IWDGRSTF LL_RCC_IsActiveFlag_IWDGRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_IWDGRST(void) +{ + return (READ_BIT(RCC->CSR, RCC_CSR_IWDGRSTF) == (RCC_CSR_IWDGRSTF)); +} + +/** + * @brief Check if RCC flag Low Power reset is set or not. + * @rmtoll CSR LPWRRSTF LL_RCC_IsActiveFlag_LPWRRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_LPWRRST(void) +{ + return (READ_BIT(RCC->CSR, RCC_CSR_LPWRRSTF) == (RCC_CSR_LPWRRSTF)); +} + +/** + * @brief Check if RCC flag is set or not. + * @rmtoll CSR OBLRSTF LL_RCC_IsActiveFlag_OBLRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_OBLRST(void) +{ + return (READ_BIT(RCC->CSR, RCC_CSR_OBLRSTF) == (RCC_CSR_OBLRSTF)); +} + +/** + * @brief Check if RCC flag Pin reset is set or not. + * @rmtoll CSR PINRSTF LL_RCC_IsActiveFlag_PINRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_PINRST(void) +{ + return (READ_BIT(RCC->CSR, RCC_CSR_PINRSTF) == (RCC_CSR_PINRSTF)); +} + +/** + * @brief Check if RCC flag POR/PDR reset is set or not. + * @rmtoll CSR PORRSTF LL_RCC_IsActiveFlag_PORRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_PORRST(void) +{ + return (READ_BIT(RCC->CSR, RCC_CSR_PORRSTF) == (RCC_CSR_PORRSTF)); +} + +/** + * @brief Check if RCC flag Software reset is set or not. + * @rmtoll CSR SFTRSTF LL_RCC_IsActiveFlag_SFTRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_SFTRST(void) +{ + return (READ_BIT(RCC->CSR, RCC_CSR_SFTRSTF) == (RCC_CSR_SFTRSTF)); +} + +/** + * @brief Check if RCC flag Window Watchdog reset is set or not. + * @rmtoll CSR WWDGRSTF LL_RCC_IsActiveFlag_WWDGRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_WWDGRST(void) +{ + return (READ_BIT(RCC->CSR, RCC_CSR_WWDGRSTF) == (RCC_CSR_WWDGRSTF)); +} + +/** + * @brief Set RMVF bit to clear the reset flags. + * @rmtoll CSR RMVF LL_RCC_ClearResetFlags + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearResetFlags(void) +{ + SET_BIT(RCC->CSR, RCC_CSR_RMVF); +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_IT_Management IT Management + * @{ + */ + +/** + * @brief Enable LSI ready interrupt + * @rmtoll CIR LSIRDYIE LL_RCC_EnableIT_LSIRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_LSIRDY(void) +{ + SET_BIT(RCC->CIR, RCC_CIR_LSIRDYIE); +} + +/** + * @brief Enable LSE ready interrupt + * @rmtoll CIR LSERDYIE LL_RCC_EnableIT_LSERDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_LSERDY(void) +{ + SET_BIT(RCC->CIR, RCC_CIR_LSERDYIE); +} + +/** + * @brief Enable MSI ready interrupt + * @rmtoll CIR MSIRDYIE LL_RCC_EnableIT_MSIRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_MSIRDY(void) +{ + SET_BIT(RCC->CIR, RCC_CIR_MSIRDYIE); +} + +/** + * @brief Enable HSI ready interrupt + * @rmtoll CIR HSIRDYIE LL_RCC_EnableIT_HSIRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_HSIRDY(void) +{ + SET_BIT(RCC->CIR, RCC_CIR_HSIRDYIE); +} + +/** + * @brief Enable HSE ready interrupt + * @rmtoll CIR HSERDYIE LL_RCC_EnableIT_HSERDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_HSERDY(void) +{ + SET_BIT(RCC->CIR, RCC_CIR_HSERDYIE); +} + +/** + * @brief Enable PLL ready interrupt + * @rmtoll CIR PLLRDYIE LL_RCC_EnableIT_PLLRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_PLLRDY(void) +{ + SET_BIT(RCC->CIR, RCC_CIR_PLLRDYIE); +} + +#if defined(RCC_LSECSS_SUPPORT) +/** + * @brief Enable LSE clock security system interrupt + * @rmtoll CIR LSECSSIE LL_RCC_EnableIT_LSECSS + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_LSECSS(void) +{ + SET_BIT(RCC->CIR, RCC_CIR_LSECSSIE); +} + +#endif /* RCC_LSECSS_SUPPORT */ +/** + * @brief Disable LSI ready interrupt + * @rmtoll CIR LSIRDYIE LL_RCC_DisableIT_LSIRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_LSIRDY(void) +{ + CLEAR_BIT(RCC->CIR, RCC_CIR_LSIRDYIE); +} + +/** + * @brief Disable LSE ready interrupt + * @rmtoll CIR LSERDYIE LL_RCC_DisableIT_LSERDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_LSERDY(void) +{ + CLEAR_BIT(RCC->CIR, RCC_CIR_LSERDYIE); +} + +/** + * @brief Disable MSI ready interrupt + * @rmtoll CIR MSIRDYIE LL_RCC_DisableIT_MSIRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_MSIRDY(void) +{ + CLEAR_BIT(RCC->CIR, RCC_CIR_MSIRDYIE); +} + +/** + * @brief Disable HSI ready interrupt + * @rmtoll CIR HSIRDYIE LL_RCC_DisableIT_HSIRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_HSIRDY(void) +{ + CLEAR_BIT(RCC->CIR, RCC_CIR_HSIRDYIE); +} + +/** + * @brief Disable HSE ready interrupt + * @rmtoll CIR HSERDYIE LL_RCC_DisableIT_HSERDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_HSERDY(void) +{ + CLEAR_BIT(RCC->CIR, RCC_CIR_HSERDYIE); +} + +/** + * @brief Disable PLL ready interrupt + * @rmtoll CIR PLLRDYIE LL_RCC_DisableIT_PLLRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_PLLRDY(void) +{ + CLEAR_BIT(RCC->CIR, RCC_CIR_PLLRDYIE); +} + +#if defined(RCC_LSECSS_SUPPORT) +/** + * @brief Disable LSE clock security system interrupt + * @rmtoll CIR LSECSSIE LL_RCC_DisableIT_LSECSS + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_LSECSS(void) +{ + CLEAR_BIT(RCC->CIR, RCC_CIR_LSECSSIE); +} + +#endif /* RCC_LSECSS_SUPPORT */ +/** + * @brief Checks if LSI ready interrupt source is enabled or disabled. + * @rmtoll CIR LSIRDYIE LL_RCC_IsEnabledIT_LSIRDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_LSIRDY(void) +{ + return (READ_BIT(RCC->CIR, RCC_CIR_LSIRDYIE) == (RCC_CIR_LSIRDYIE)); +} + +/** + * @brief Checks if LSE ready interrupt source is enabled or disabled. + * @rmtoll CIR LSERDYIE LL_RCC_IsEnabledIT_LSERDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_LSERDY(void) +{ + return (READ_BIT(RCC->CIR, RCC_CIR_LSERDYIE) == (RCC_CIR_LSERDYIE)); +} + +/** + * @brief Checks if MSI ready interrupt source is enabled or disabled. + * @rmtoll CIR MSIRDYIE LL_RCC_IsEnabledIT_MSIRDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_MSIRDY(void) +{ + return (READ_BIT(RCC->CIR, RCC_CIR_MSIRDYIE) == (RCC_CIR_MSIRDYIE)); +} + +/** + * @brief Checks if HSI ready interrupt source is enabled or disabled. + * @rmtoll CIR HSIRDYIE LL_RCC_IsEnabledIT_HSIRDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_HSIRDY(void) +{ + return (READ_BIT(RCC->CIR, RCC_CIR_HSIRDYIE) == (RCC_CIR_HSIRDYIE)); +} + +/** + * @brief Checks if HSE ready interrupt source is enabled or disabled. + * @rmtoll CIR HSERDYIE LL_RCC_IsEnabledIT_HSERDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_HSERDY(void) +{ + return (READ_BIT(RCC->CIR, RCC_CIR_HSERDYIE) == (RCC_CIR_HSERDYIE)); +} + +/** + * @brief Checks if PLL ready interrupt source is enabled or disabled. + * @rmtoll CIR PLLRDYIE LL_RCC_IsEnabledIT_PLLRDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_PLLRDY(void) +{ + return (READ_BIT(RCC->CIR, RCC_CIR_PLLRDYIE) == (RCC_CIR_PLLRDYIE)); +} + +#if defined(RCC_LSECSS_SUPPORT) +/** + * @brief Checks if LSECSS interrupt source is enabled or disabled. + * @rmtoll CIR LSECSSIE LL_RCC_IsEnabledIT_LSECSS + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_LSECSS(void) +{ + return (READ_BIT(RCC->CIR, RCC_CIR_LSECSSIE) == (RCC_CIR_LSECSSIE)); +} + +#endif /* RCC_LSECSS_SUPPORT */ +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup RCC_LL_EF_Init De-initialization function + * @{ + */ +ErrorStatus LL_RCC_DeInit(void); +/** + * @} + */ + +/** @defgroup RCC_LL_EF_Get_Freq Get system and peripherals clocks frequency functions + * @{ + */ +void LL_RCC_GetSystemClocksFreq(LL_RCC_ClocksTypeDef *RCC_Clocks); +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* RCC */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32L1xx_LL_RCC_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_ll_rtc.h b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_ll_rtc.h new file mode 100755 index 0000000..b78eff2 --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_ll_rtc.h @@ -0,0 +1,3854 @@ +/** + ****************************************************************************** + * @file stm32l1xx_ll_rtc.h + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief Header file of RTC LL module. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L1xx_LL_RTC_H +#define __STM32L1xx_LL_RTC_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx.h" + +/** @addtogroup STM32L1xx_LL_Driver + * @{ + */ + +#if defined(RTC) + +/** @defgroup RTC_LL RTC + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @defgroup RTC_LL_Private_Constants RTC Private Constants + * @{ + */ +/* Masks Definition */ +#define RTC_INIT_MASK ((uint32_t)0xFFFFFFFFU) +#define RTC_RSF_MASK ((uint32_t)0xFFFFFF5FU) + +/* Write protection defines */ +#define RTC_WRITE_PROTECTION_DISABLE ((uint8_t)0xFFU) +#define RTC_WRITE_PROTECTION_ENABLE_1 ((uint8_t)0xCAU) +#define RTC_WRITE_PROTECTION_ENABLE_2 ((uint8_t)0x53U) + +/* Defines used for the bit position in the register and perform offsets */ +#define RTC_POSITION_TR_HT (uint32_t)POSITION_VAL(RTC_TR_HT) +#define RTC_POSITION_TR_HU (uint32_t)POSITION_VAL(RTC_TR_HU) +#define RTC_POSITION_TR_MT (uint32_t)POSITION_VAL(RTC_TR_MNT) +#define RTC_POSITION_TR_MU (uint32_t)POSITION_VAL(RTC_TR_MNU) +#define RTC_POSITION_TR_ST (uint32_t)POSITION_VAL(RTC_TR_ST) +#define RTC_POSITION_TR_SU (uint32_t)POSITION_VAL(RTC_TR_SU) +#define RTC_POSITION_DR_YT (uint32_t)POSITION_VAL(RTC_DR_YT) +#define RTC_POSITION_DR_YU (uint32_t)POSITION_VAL(RTC_DR_YU) +#define RTC_POSITION_DR_MT (uint32_t)POSITION_VAL(RTC_DR_MT) +#define RTC_POSITION_DR_MU (uint32_t)POSITION_VAL(RTC_DR_MU) +#define RTC_POSITION_DR_DT (uint32_t)POSITION_VAL(RTC_DR_DT) +#define RTC_POSITION_DR_DU (uint32_t)POSITION_VAL(RTC_DR_DU) +#define RTC_POSITION_DR_WDU (uint32_t)POSITION_VAL(RTC_DR_WDU) +#define RTC_POSITION_ALMA_DT (uint32_t)POSITION_VAL(RTC_ALRMAR_DT) +#define RTC_POSITION_ALMA_DU (uint32_t)POSITION_VAL(RTC_ALRMAR_DU) +#define RTC_POSITION_ALMA_HT (uint32_t)POSITION_VAL(RTC_ALRMAR_HT) +#define RTC_POSITION_ALMA_HU (uint32_t)POSITION_VAL(RTC_ALRMAR_HU) +#define RTC_POSITION_ALMA_MT (uint32_t)POSITION_VAL(RTC_ALRMAR_MNT) +#define RTC_POSITION_ALMA_MU (uint32_t)POSITION_VAL(RTC_ALRMAR_MNU) +#define RTC_POSITION_ALMA_SU (uint32_t)POSITION_VAL(RTC_ALRMAR_SU) +#define RTC_POSITION_ALMA_ST (uint32_t)POSITION_VAL(RTC_ALRMAR_ST) +#define RTC_POSITION_ALMB_DT (uint32_t)POSITION_VAL(RTC_ALRMBR_DT) +#define RTC_POSITION_ALMB_DU (uint32_t)POSITION_VAL(RTC_ALRMBR_DU) +#define RTC_POSITION_ALMB_HT (uint32_t)POSITION_VAL(RTC_ALRMBR_HT) +#define RTC_POSITION_ALMB_HU (uint32_t)POSITION_VAL(RTC_ALRMBR_HU) +#define RTC_POSITION_ALMB_MT (uint32_t)POSITION_VAL(RTC_ALRMBR_MNT) +#define RTC_POSITION_ALMB_MU (uint32_t)POSITION_VAL(RTC_ALRMBR_MNU) +#define RTC_POSITION_ALMB_SU (uint32_t)POSITION_VAL(RTC_ALRMBR_SU) +#define RTC_POSITION_ALMB_ST (uint32_t)POSITION_VAL(RTC_ALRMBR_ST) +#define RTC_POSITION_PRER_PREDIV_A (uint32_t)POSITION_VAL(RTC_PRER_PREDIV_A) +#define RTC_POSITION_ALMA_MASKSS (uint32_t)POSITION_VAL(RTC_ALRMASSR_MASKSS) +#define RTC_POSITION_ALMB_MASKSS (uint32_t)POSITION_VAL(RTC_ALRMBSSR_MASKSS) +#define RTC_POSITION_TS_HU (uint32_t)POSITION_VAL(RTC_TSTR_HU) +#define RTC_POSITION_TS_MNU (uint32_t)POSITION_VAL(RTC_TSTR_MNU) +#define RTC_POSITION_TS_WDU (uint32_t)POSITION_VAL(RTC_TSDR_WDU) +#define RTC_POSITION_TS_MU (uint32_t)POSITION_VAL(RTC_TSDR_MU) + +/* Defines used to combine date & time */ +#define RTC_OFFSET_WEEKDAY (uint32_t)24U +#define RTC_OFFSET_DAY (uint32_t)16U +#define RTC_OFFSET_MONTH (uint32_t)8U +#define RTC_OFFSET_HOUR (uint32_t)16U +#define RTC_OFFSET_MINUTE (uint32_t)8U + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup RTC_LL_Private_Macros RTC Private Macros + * @{ + */ +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup RTC_LL_ES_INIT RTC Exported Init structure + * @{ + */ + +/** + * @brief RTC Init structures definition + */ +typedef struct +{ + uint32_t HourFormat; /*!< Specifies the RTC Hours Format. + This parameter can be a value of @ref RTC_LL_EC_HOURFORMAT + + This feature can be modified afterwards using unitary function + @ref LL_RTC_SetHourFormat(). */ + + uint32_t AsynchPrescaler; /*!< Specifies the RTC Asynchronous Predivider value. + This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x7F + + This feature can be modified afterwards using unitary function + @ref LL_RTC_SetAsynchPrescaler(). */ + + uint32_t SynchPrescaler; /*!< Specifies the RTC Synchronous Predivider value. + This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x7FFF + + This feature can be modified afterwards using unitary function + @ref LL_RTC_SetSynchPrescaler(). */ +} LL_RTC_InitTypeDef; + +/** + * @brief RTC Time structure definition + */ +typedef struct +{ + uint32_t TimeFormat; /*!< Specifies the RTC AM/PM Time. + This parameter can be a value of @ref RTC_LL_EC_TIME_FORMAT + + This feature can be modified afterwards using unitary function @ref LL_RTC_TIME_SetFormat(). */ + + uint8_t Hours; /*!< Specifies the RTC Time Hours. + This parameter must be a number between Min_Data = 0 and Max_Data = 12 if the @ref LL_RTC_TIME_FORMAT_PM is selected. + This parameter must be a number between Min_Data = 0 and Max_Data = 23 if the @ref LL_RTC_TIME_FORMAT_AM_OR_24 is selected. + + This feature can be modified afterwards using unitary function @ref LL_RTC_TIME_SetHour(). */ + + uint8_t Minutes; /*!< Specifies the RTC Time Minutes. + This parameter must be a number between Min_Data = 0 and Max_Data = 59 + + This feature can be modified afterwards using unitary function @ref LL_RTC_TIME_SetMinute(). */ + + uint8_t Seconds; /*!< Specifies the RTC Time Seconds. + This parameter must be a number between Min_Data = 0 and Max_Data = 59 + + This feature can be modified afterwards using unitary function @ref LL_RTC_TIME_SetSecond(). */ +} LL_RTC_TimeTypeDef; + +/** + * @brief RTC Date structure definition + */ +typedef struct +{ + uint8_t WeekDay; /*!< Specifies the RTC Date WeekDay. + This parameter can be a value of @ref RTC_LL_EC_WEEKDAY + + This feature can be modified afterwards using unitary function @ref LL_RTC_DATE_SetWeekDay(). */ + + uint8_t Month; /*!< Specifies the RTC Date Month. + This parameter can be a value of @ref RTC_LL_EC_MONTH + + This feature can be modified afterwards using unitary function @ref LL_RTC_DATE_SetMonth(). */ + + uint8_t Day; /*!< Specifies the RTC Date Day. + This parameter must be a number between Min_Data = 1 and Max_Data = 31 + + This feature can be modified afterwards using unitary function @ref LL_RTC_DATE_SetDay(). */ + + uint8_t Year; /*!< Specifies the RTC Date Year. + This parameter must be a number between Min_Data = 0 and Max_Data = 99 + + This feature can be modified afterwards using unitary function @ref LL_RTC_DATE_SetYear(). */ +} LL_RTC_DateTypeDef; + +/** + * @brief RTC Alarm structure definition + */ +typedef struct +{ + LL_RTC_TimeTypeDef AlarmTime; /*!< Specifies the RTC Alarm Time members. */ + + uint32_t AlarmMask; /*!< Specifies the RTC Alarm Masks. + This parameter can be a value of @ref RTC_LL_EC_ALMA_MASK for ALARM A or @ref RTC_LL_EC_ALMB_MASK for ALARM B. + + This feature can be modified afterwards using unitary function @ref LL_RTC_ALMA_SetMask() for ALARM A + or @ref LL_RTC_ALMB_SetMask() for ALARM B + */ + + uint32_t AlarmDateWeekDaySel; /*!< Specifies the RTC Alarm is on day or WeekDay. + This parameter can be a value of @ref RTC_LL_EC_ALMA_WEEKDAY_SELECTION for ALARM A or @ref RTC_LL_EC_ALMB_WEEKDAY_SELECTION for ALARM B + + This feature can be modified afterwards using unitary function @ref LL_RTC_ALMA_EnableWeekday() or @ref LL_RTC_ALMA_DisableWeekday() + for ALARM A or @ref LL_RTC_ALMB_EnableWeekday() or @ref LL_RTC_ALMB_DisableWeekday() for ALARM B + */ + + uint8_t AlarmDateWeekDay; /*!< Specifies the RTC Alarm Day/WeekDay. + If AlarmDateWeekDaySel set to day, this parameter must be a number between Min_Data = 1 and Max_Data = 31. + + This feature can be modified afterwards using unitary function @ref LL_RTC_ALMA_SetDay() + for ALARM A or @ref LL_RTC_ALMB_SetDay() for ALARM B. + + If AlarmDateWeekDaySel set to Weekday, this parameter can be a value of @ref RTC_LL_EC_WEEKDAY. + + This feature can be modified afterwards using unitary function @ref LL_RTC_ALMA_SetWeekDay() + for ALARM A or @ref LL_RTC_ALMB_SetWeekDay() for ALARM B. + */ +} LL_RTC_AlarmTypeDef; + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup RTC_LL_Exported_Constants RTC Exported Constants + * @{ + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup RTC_LL_EC_FORMAT FORMAT + * @{ + */ +#define LL_RTC_FORMAT_BIN ((uint32_t)0x000000000U) /*!< Binary data format */ +#define LL_RTC_FORMAT_BCD ((uint32_t)0x000000001U) /*!< BCD data format */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_ALMA_WEEKDAY_SELECTION RTC Alarm A Date WeekDay + * @{ + */ +#define LL_RTC_ALMA_DATEWEEKDAYSEL_DATE ((uint32_t)0x00000000U) /*!< Alarm A Date is selected */ +#define LL_RTC_ALMA_DATEWEEKDAYSEL_WEEKDAY RTC_ALRMAR_WDSEL /*!< Alarm A WeekDay is selected */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_ALMB_WEEKDAY_SELECTION RTC Alarm B Date WeekDay + * @{ + */ +#define LL_RTC_ALMB_DATEWEEKDAYSEL_DATE ((uint32_t)0x00000000U) /*!< Alarm B Date is selected */ +#define LL_RTC_ALMB_DATEWEEKDAYSEL_WEEKDAY RTC_ALRMBR_WDSEL /*!< Alarm B WeekDay is selected */ +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ + +/** @defgroup RTC_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_RTC_ReadReg function + * @{ + */ +#if defined(RTC_SMOOTHCALIB_SUPPORT) +#define LL_RTC_ISR_RECALPF RTC_ISR_RECALPF +#endif /* RTC_SMOOTHCALIB_SUPPORT */ +#define LL_RTC_ISR_TAMP3F RTC_ISR_TAMP3F +#define LL_RTC_ISR_TAMP2F RTC_ISR_TAMP2F +#define LL_RTC_ISR_TAMP1F RTC_ISR_TAMP1F +#define LL_RTC_ISR_TSOVF RTC_ISR_TSOVF +#define LL_RTC_ISR_TSF RTC_ISR_TSF +#define LL_RTC_ISR_WUTF RTC_ISR_WUTF +#define LL_RTC_ISR_ALRBF RTC_ISR_ALRBF +#define LL_RTC_ISR_ALRAF RTC_ISR_ALRAF +#define LL_RTC_ISR_INITF RTC_ISR_INITF +#define LL_RTC_ISR_RSF RTC_ISR_RSF +#define LL_RTC_ISR_INITS RTC_ISR_INITS +#define LL_RTC_ISR_SHPF RTC_ISR_SHPF +#define LL_RTC_ISR_WUTWF RTC_ISR_WUTWF +#define LL_RTC_ISR_ALRBWF RTC_ISR_ALRBWF +#define LL_RTC_ISR_ALRAWF RTC_ISR_ALRAWF +/** + * @} + */ + +/** @defgroup RTC_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_RTC_ReadReg and LL_RTC_WriteReg functions + * @{ + */ +#define LL_RTC_CR_TSIE RTC_CR_TSIE +#define LL_RTC_CR_WUTIE RTC_CR_WUTIE +#define LL_RTC_CR_ALRBIE RTC_CR_ALRBIE +#define LL_RTC_CR_ALRAIE RTC_CR_ALRAIE +#define LL_RTC_TAFCR_TAMPIE RTC_TAFCR_TAMPIE +/** + * @} + */ + +/** @defgroup RTC_LL_EC_WEEKDAY WEEK DAY + * @{ + */ +#define LL_RTC_WEEKDAY_MONDAY ((uint8_t)0x01U) /*!< Monday */ +#define LL_RTC_WEEKDAY_TUESDAY ((uint8_t)0x02U) /*!< Tuesday */ +#define LL_RTC_WEEKDAY_WEDNESDAY ((uint8_t)0x03U) /*!< Wednesday */ +#define LL_RTC_WEEKDAY_THURSDAY ((uint8_t)0x04U) /*!< Thrusday */ +#define LL_RTC_WEEKDAY_FRIDAY ((uint8_t)0x05U) /*!< Friday */ +#define LL_RTC_WEEKDAY_SATURDAY ((uint8_t)0x06U) /*!< Saturday */ +#define LL_RTC_WEEKDAY_SUNDAY ((uint8_t)0x07U) /*!< Sunday */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_MONTH MONTH + * @{ + */ +#define LL_RTC_MONTH_JANUARY ((uint8_t)0x01U) /*!< January */ +#define LL_RTC_MONTH_FEBRUARY ((uint8_t)0x02U) /*!< February */ +#define LL_RTC_MONTH_MARCH ((uint8_t)0x03U) /*!< March */ +#define LL_RTC_MONTH_APRIL ((uint8_t)0x04U) /*!< April */ +#define LL_RTC_MONTH_MAY ((uint8_t)0x05U) /*!< May */ +#define LL_RTC_MONTH_JUNE ((uint8_t)0x06U) /*!< June */ +#define LL_RTC_MONTH_JULY ((uint8_t)0x07U) /*!< July */ +#define LL_RTC_MONTH_AUGUST ((uint8_t)0x08U) /*!< August */ +#define LL_RTC_MONTH_SEPTEMBER ((uint8_t)0x09U) /*!< September */ +#define LL_RTC_MONTH_OCTOBER ((uint8_t)0x10U) /*!< October */ +#define LL_RTC_MONTH_NOVEMBER ((uint8_t)0x11U) /*!< November */ +#define LL_RTC_MONTH_DECEMBER ((uint8_t)0x12U) /*!< December */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_HOURFORMAT HOUR FORMAT + * @{ + */ +#define LL_RTC_HOURFORMAT_24HOUR (uint32_t)0x00000000U /*!< 24 hour/day format */ +#define LL_RTC_HOURFORMAT_AMPM RTC_CR_FMT /*!< AM/PM hour format */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_ALARMOUT ALARM OUTPUT + * @{ + */ +#define LL_RTC_ALARMOUT_DISABLE ((uint32_t)0x00000000U) /*!< Output disabled */ +#define LL_RTC_ALARMOUT_ALMA RTC_CR_OSEL_0 /*!< Alarm A output enabled */ +#define LL_RTC_ALARMOUT_ALMB RTC_CR_OSEL_1 /*!< Alarm B output enabled */ +#define LL_RTC_ALARMOUT_WAKEUP RTC_CR_OSEL /*!< Wakeup output enabled */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_ALARM_OUTPUTTYPE ALARM OUTPUT TYPE + * @{ + */ +#define LL_RTC_ALARM_OUTPUTTYPE_OPENDRAIN (uint32_t)0x00000000U /*!< RTC_ALARM, when mapped on PC13, is open-drain output */ +#define LL_RTC_ALARM_OUTPUTTYPE_PUSHPULL RTC_TAFCR_ALARMOUTTYPE /*!< RTC_ALARM, when mapped on PC13, is push-pull output */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_OUTPUTPOLARITY_PIN OUTPUT POLARITY PIN + * @{ + */ +#define LL_RTC_OUTPUTPOLARITY_PIN_HIGH (uint32_t)0x00000000U /*!< Pin is high when ALRAF/ALRBF/WUTF is asserted (depending on OSEL)*/ +#define LL_RTC_OUTPUTPOLARITY_PIN_LOW RTC_CR_POL /*!< Pin is low when ALRAF/ALRBF/WUTF is asserted (depending on OSEL) */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_TIME_FORMAT TIME FORMAT + * @{ + */ +#define LL_RTC_TIME_FORMAT_AM_OR_24 (uint32_t)0x00000000U /*!< AM or 24-hour format */ +#define LL_RTC_TIME_FORMAT_PM RTC_TR_PM /*!< PM */ +/** + * @} + */ + +#if defined(RTC_SHIFTR_ADD1S) +/** @defgroup RTC_LL_EC_SHIFT_SECOND SHIFT SECOND + * @{ + */ +#define LL_RTC_SHIFT_SECOND_DELAY (uint32_t)0x00000000U /* Delay (seconds) = SUBFS / (PREDIV_S + 1) */ +#define LL_RTC_SHIFT_SECOND_ADVANCE RTC_SHIFTR_ADD1S /* Advance (seconds) = (1 - (SUBFS / (PREDIV_S + 1))) */ +/** + * @} + */ +#endif /* RTC_SHIFTR_ADD1S */ + +/** @defgroup RTC_LL_EC_ALMA_MASK ALARMA MASK + * @{ + */ +#define LL_RTC_ALMA_MASK_NONE ((uint32_t)0x00000000U) /*!< No masks applied on Alarm A*/ +#define LL_RTC_ALMA_MASK_DATEWEEKDAY RTC_ALRMAR_MSK4 /*!< Date/day do not care in Alarm A comparison */ +#define LL_RTC_ALMA_MASK_HOURS RTC_ALRMAR_MSK3 /*!< Hours do not care in Alarm A comparison */ +#define LL_RTC_ALMA_MASK_MINUTES RTC_ALRMAR_MSK2 /*!< Minutes do not care in Alarm A comparison */ +#define LL_RTC_ALMA_MASK_SECONDS RTC_ALRMAR_MSK1 /*!< Seconds do not care in Alarm A comparison */ +#define LL_RTC_ALMA_MASK_ALL (RTC_ALRMAR_MSK4 | RTC_ALRMAR_MSK3 | RTC_ALRMAR_MSK2 | RTC_ALRMAR_MSK1) /*!< Masks all */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_ALMA_TIME_FORMAT ALARMA TIME FORMAT + * @{ + */ +#define LL_RTC_ALMA_TIME_FORMAT_AM (uint32_t)0x00000000U /*!< AM or 24-hour format */ +#define LL_RTC_ALMA_TIME_FORMAT_PM RTC_ALRMAR_PM /*!< PM */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_ALMB_MASK ALARMB MASK + * @{ + */ +#define LL_RTC_ALMB_MASK_NONE ((uint32_t)0x00000000U) /*!< No masks applied on Alarm B*/ +#define LL_RTC_ALMB_MASK_DATEWEEKDAY RTC_ALRMBR_MSK4 /*!< Date/day do not care in Alarm B comparison */ +#define LL_RTC_ALMB_MASK_HOURS RTC_ALRMBR_MSK3 /*!< Hours do not care in Alarm B comparison */ +#define LL_RTC_ALMB_MASK_MINUTES RTC_ALRMBR_MSK2 /*!< Minutes do not care in Alarm B comparison */ +#define LL_RTC_ALMB_MASK_SECONDS RTC_ALRMBR_MSK1 /*!< Seconds do not care in Alarm B comparison */ +#define LL_RTC_ALMB_MASK_ALL (RTC_ALRMBR_MSK4 | RTC_ALRMBR_MSK3 | RTC_ALRMBR_MSK2 | RTC_ALRMBR_MSK1) /*!< Masks all */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_ALMB_TIME_FORMAT ALARMB TIME FORMAT + * @{ + */ +#define LL_RTC_ALMB_TIME_FORMAT_AM (uint32_t)0x00000000U /*!< AM or 24-hour format */ +#define LL_RTC_ALMB_TIME_FORMAT_PM RTC_ALRMBR_PM /*!< PM */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_TIMESTAMP_EDGE TIMESTAMP EDGE + * @{ + */ +#define LL_RTC_TIMESTAMP_EDGE_RISING (uint32_t)0x00000000U /*!< RTC_TS input rising edge generates a time-stamp event */ +#define LL_RTC_TIMESTAMP_EDGE_FALLING RTC_CR_TSEDGE /*!< RTC_TS input falling edge generates a time-stamp even */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_TS_TIME_FORMAT TIMESTAMP TIME FORMAT + * @{ + */ +#define LL_RTC_TS_TIME_FORMAT_AM (uint32_t)0x00000000U /*!< AM or 24-hour format */ +#define LL_RTC_TS_TIME_FORMAT_PM RTC_TSTR_PM /*!< PM */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_TAMPER TAMPER + * @{ + */ +#if defined(RTC_TAMPER1_SUPPORT) +#define LL_RTC_TAMPER_1 RTC_TAFCR_TAMP1E /*!< RTC_TAMP1 input detection */ +#endif /* RTC_TAMPER1_SUPPORT */ +#if defined(RTC_TAMPER2_SUPPORT) +#define LL_RTC_TAMPER_2 RTC_TAFCR_TAMP2E /*!< RTC_TAMP2 input detection */ +#endif /* RTC_TAMPER2_SUPPORT */ +#if defined(RTC_TAMPER3_SUPPORT) +#define LL_RTC_TAMPER_3 RTC_TAFCR_TAMP3E /*!< RTC_TAMP3 input detection */ +#endif /* RTC_TAMPER3_SUPPORT */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_TAMPER_MASK TAMPER MASK + * @{ + */ +#if defined(RTC_TAMPER1_SUPPORT) +#define LL_RTC_TAMPER_MASK_TAMPER1 RTC_TAFCR_TAMP1MF /*!< Tamper 1 event generates a trigger event. TAMP1F is masked and internally cleared by hardware.The backup registers are not erased */ +#endif /* RTC_TAMPER1_SUPPORT */ +#if defined(RTC_TAMPER2_SUPPORT) +#define LL_RTC_TAMPER_MASK_TAMPER2 RTC_TAFCR_TAMP2MF /*!< Tamper 2 event generates a trigger event. TAMP2F is masked and internally cleared by hardware. The backup registers are not erased. */ +#endif /* RTC_TAMPER2_SUPPORT */ +#if defined(RTC_TAMPER3_SUPPORT) +#define LL_RTC_TAMPER_MASK_TAMPER3 RTC_TAFCR_TAMP3MF /*!< Tamper 3 event generates a trigger event. TAMP3F is masked and internally cleared by hardware. The backup registers are not erased */ +#endif /* RTC_TAMPER3_SUPPORT */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_TAMPER_NOERASE TAMPER NO ERASE + * @{ + */ +#if defined(RTC_TAMPER1_SUPPORT) +#define LL_RTC_TAMPER_NOERASE_TAMPER1 RTC_TAFCR_TAMP1NOERASE /*!< Tamper 1 event does not erase the backup registers. */ +#endif /* RTC_TAMPER1_SUPPORT */ +#if defined(RTC_TAMPER2_SUPPORT) +#define LL_RTC_TAMPER_NOERASE_TAMPER2 RTC_TAFCR_TAMP2NOERASE /*!< Tamper 2 event does not erase the backup registers. */ +#endif /* RTC_TAMPER2_SUPPORT */ +#if defined(RTC_TAMPER3_SUPPORT) +#define LL_RTC_TAMPER_NOERASE_TAMPER3 RTC_TAFCR_TAMP3NOERASE /*!< Tamper 3 event does not erase the backup registers. */ +#endif /* RTC_TAMPER3_SUPPORT */ +/** + * @} + */ + +#if defined(RTC_TAFCR_TAMPPRCH) +/** @defgroup RTC_LL_EC_TAMPER_DURATION TAMPER DURATION + * @{ + */ +#define LL_RTC_TAMPER_DURATION_1RTCCLK ((uint32_t)0x00000000U) /*!< Tamper pins are pre-charged before sampling during 1 RTCCLK cycle */ +#define LL_RTC_TAMPER_DURATION_2RTCCLK RTC_TAFCR_TAMPPRCH_0 /*!< Tamper pins are pre-charged before sampling during 2 RTCCLK cycles */ +#define LL_RTC_TAMPER_DURATION_4RTCCLK RTC_TAFCR_TAMPPRCH_1 /*!< Tamper pins are pre-charged before sampling during 4 RTCCLK cycles */ +#define LL_RTC_TAMPER_DURATION_8RTCCLK RTC_TAFCR_TAMPPRCH /*!< Tamper pins are pre-charged before sampling during 8 RTCCLK cycles */ +/** + * @} + */ +#endif /* RTC_TAFCR_TAMPPRCH */ + +#if defined(RTC_TAFCR_TAMPFLT) +/** @defgroup RTC_LL_EC_TAMPER_FILTER TAMPER FILTER + * @{ + */ +#define LL_RTC_TAMPER_FILTER_DISABLE ((uint32_t)0x00000000U) /*!< Tamper filter is disabled */ +#define LL_RTC_TAMPER_FILTER_2SAMPLE RTC_TAFCR_TAMPFLT_0 /*!< Tamper is activated after 2 consecutive samples at the active level */ +#define LL_RTC_TAMPER_FILTER_4SAMPLE RTC_TAFCR_TAMPFLT_1 /*!< Tamper is activated after 4 consecutive samples at the active level */ +#define LL_RTC_TAMPER_FILTER_8SAMPLE RTC_TAFCR_TAMPFLT /*!< Tamper is activated after 8 consecutive samples at the active level. */ +/** + * @} + */ +#endif /* RTC_TAFCR_TAMPFLT */ + +#if defined(RTC_TAFCR_TAMPFREQ) +/** @defgroup RTC_LL_EC_TAMPER_SAMPLFREQDIV TAMPER SAMPLING FREQUENCY DIVIDER + * @{ + */ +#define LL_RTC_TAMPER_SAMPLFREQDIV_32768 ((uint32_t)0x00000000U) /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 32768 */ +#define LL_RTC_TAMPER_SAMPLFREQDIV_16384 RTC_TAFCR_TAMPFREQ_0 /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 16384 */ +#define LL_RTC_TAMPER_SAMPLFREQDIV_8192 RTC_TAFCR_TAMPFREQ_1 /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 8192 */ +#define LL_RTC_TAMPER_SAMPLFREQDIV_4096 (RTC_TAFCR_TAMPFREQ_1 | RTC_TAFCR_TAMPFREQ_0) /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 4096 */ +#define LL_RTC_TAMPER_SAMPLFREQDIV_2048 RTC_TAFCR_TAMPFREQ_2 /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 2048 */ +#define LL_RTC_TAMPER_SAMPLFREQDIV_1024 (RTC_TAFCR_TAMPFREQ_2 | RTC_TAFCR_TAMPFREQ_0) /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 1024 */ +#define LL_RTC_TAMPER_SAMPLFREQDIV_512 (RTC_TAFCR_TAMPFREQ_2 | RTC_TAFCR_TAMPFREQ_1) /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 512 */ +#define LL_RTC_TAMPER_SAMPLFREQDIV_256 RTC_TAFCR_TAMPFREQ /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 256 */ +/** + * @} + */ +#endif /* RTC_TAFCR_TAMPFREQ */ + +/** @defgroup RTC_LL_EC_TAMPER_ACTIVELEVEL TAMPER ACTIVE LEVEL + * @{ + */ +#if defined(RTC_TAMPER1_SUPPORT) +#define LL_RTC_TAMPER_ACTIVELEVEL_TAMP1 RTC_TAFCR_TAMP1TRG /*!< RTC_TAMP1 input falling edge (if TAMPFLT = 00) or staying high (if TAMPFLT != 00) triggers a tamper detection event*/ +#endif /* RTC_TAMPER1_SUPPORT */ +#if defined(RTC_TAMPER2_SUPPORT) +#define LL_RTC_TAMPER_ACTIVELEVEL_TAMP2 RTC_TAFCR_TAMP2TRG /*!< RTC_TAMP2 input falling edge (if TAMPFLT = 00) or staying high (if TAMPFLT != 00) triggers a tamper detection event*/ +#endif /* RTC_TAMPER2_SUPPORT */ +#if defined(RTC_TAMPER3_SUPPORT) +#define LL_RTC_TAMPER_ACTIVELEVEL_TAMP3 RTC_TAFCR_TAMP3TRG /*!< RTC_TAMP3 input falling edge (if TAMPFLT = 00) or staying high (if TAMPFLT != 00) triggers a tamper detection event*/ +#endif /* RTC_TAMPER3_SUPPORT */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_WAKEUPCLOCK_DIV WAKEUP CLOCK DIV + * @{ + */ +#define LL_RTC_WAKEUPCLOCK_DIV_16 ((uint32_t)0x00000000U) /*!< RTC/16 clock is selected */ +#define LL_RTC_WAKEUPCLOCK_DIV_8 (RTC_CR_WUCKSEL_0) /*!< RTC/8 clock is selected */ +#define LL_RTC_WAKEUPCLOCK_DIV_4 (RTC_CR_WUCKSEL_1) /*!< RTC/4 clock is selected */ +#define LL_RTC_WAKEUPCLOCK_DIV_2 (RTC_CR_WUCKSEL_1 | RTC_CR_WUCKSEL_0) /*!< RTC/2 clock is selected */ +#define LL_RTC_WAKEUPCLOCK_CKSPRE (RTC_CR_WUCKSEL_2) /*!< ck_spre (usually 1 Hz) clock is selected */ +#define LL_RTC_WAKEUPCLOCK_CKSPRE_WUT (RTC_CR_WUCKSEL_2 | RTC_CR_WUCKSEL_1) /*!< ck_spre (usually 1 Hz) clock is selected and 2exp16 is added to the WUT counter value*/ +/** + * @} + */ + +#if defined(RTC_BACKUP_SUPPORT) +/** @defgroup RTC_LL_EC_BKP BACKUP + * @{ + */ +#define LL_RTC_BKP_DR0 ((uint32_t)0x00000000U) +#define LL_RTC_BKP_DR1 ((uint32_t)0x00000001U) +#define LL_RTC_BKP_DR2 ((uint32_t)0x00000002U) +#define LL_RTC_BKP_DR3 ((uint32_t)0x00000003U) +#define LL_RTC_BKP_DR4 ((uint32_t)0x00000004U) +#if RTC_BKP_NUMBER > 5 +#define LL_RTC_BKP_DR5 ((uint32_t)0x00000005U) +#define LL_RTC_BKP_DR6 ((uint32_t)0x00000006U) +#define LL_RTC_BKP_DR7 ((uint32_t)0x00000007U) +#define LL_RTC_BKP_DR8 ((uint32_t)0x00000008U) +#define LL_RTC_BKP_DR9 ((uint32_t)0x00000009U) +#define LL_RTC_BKP_DR10 ((uint32_t)0x0000000AU) +#define LL_RTC_BKP_DR11 ((uint32_t)0x0000000BU) +#define LL_RTC_BKP_DR12 ((uint32_t)0x0000000CU) +#define LL_RTC_BKP_DR13 ((uint32_t)0x0000000DU) +#define LL_RTC_BKP_DR14 ((uint32_t)0x0000000EU) +#define LL_RTC_BKP_DR15 ((uint32_t)0x0000000FU) +#endif /* RTC_BKP_NUMBER > 5 */ + +#if RTC_BKP_NUMBER > 16 +#define LL_RTC_BKP_DR16 ((uint32_t)0x00000010U) +#define LL_RTC_BKP_DR17 ((uint32_t)0x00000011U) +#define LL_RTC_BKP_DR18 ((uint32_t)0x00000012U) +#define LL_RTC_BKP_DR19 ((uint32_t)0x00000013U) +#endif /* RTC_BKP_NUMBER > 16 */ + +#if RTC_BKP_NUMBER > 20 +#define LL_RTC_BKP_DR20 ((uint32_t)0x00000014U) +#define LL_RTC_BKP_DR21 ((uint32_t)0x00000015U) +#define LL_RTC_BKP_DR22 ((uint32_t)0x00000016U) +#define LL_RTC_BKP_DR23 ((uint32_t)0x00000017U) +#define LL_RTC_BKP_DR24 ((uint32_t)0x00000018U) +#define LL_RTC_BKP_DR25 ((uint32_t)0x00000019U) +#define LL_RTC_BKP_DR26 ((uint32_t)0x0000001AU) +#define LL_RTC_BKP_DR27 ((uint32_t)0x0000001BU) +#define LL_RTC_BKP_DR28 ((uint32_t)0x0000001CU) +#define LL_RTC_BKP_DR29 ((uint32_t)0x0000001DU) +#define LL_RTC_BKP_DR30 ((uint32_t)0x0000001EU) +#define LL_RTC_BKP_DR31 ((uint32_t)0x0000001FU) +#endif /* RTC_BKP_NUMBER > 20 */ +/** + * @} + */ +#endif /* RTC_BACKUP_SUPPORT */ + +/** @defgroup RTC_LL_EC_CALIB_OUTPUT Calibration output + * @{ + */ +#define LL_RTC_CALIB_OUTPUT_NONE (uint32_t)0x00000000U /*!< Calibration output disabled */ +#if defined(RTC_CR_COSEL) +#define LL_RTC_CALIB_OUTPUT_1HZ (RTC_CR_COE | RTC_CR_COSEL) /*!< Calibration output is 512 Hz */ +#endif +#define LL_RTC_CALIB_OUTPUT_512HZ (RTC_CR_COE) /*!< Calibration output is 1 Hz */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_CALIB_SIGN Coarse digital calibration sign + * @{ + */ +#define LL_RTC_CALIB_SIGN_POSITIVE (uint32_t)0x00000000U /*!< Positive calibration: calendar update frequency is increased */ +#define LL_RTC_CALIB_SIGN_NEGATIVE RTC_CALIBR_DCS /*!< Negative calibration: calendar update frequency is decreased */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_CALIB_INSERTPULSE Calibration pulse insertion + * @{ + */ +#define LL_RTC_CALIB_INSERTPULSE_NONE (uint32_t)0x00000000U /*!< No RTCCLK pulses are added */ +#define LL_RTC_CALIB_INSERTPULSE_SET RTC_CALR_CALP /*!< One RTCCLK pulse is effectively inserted every 2exp11 pulses (frequency increased by 488.5 ppm) */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_CALIB_PERIOD Calibration period + * @{ + */ +#define LL_RTC_CALIB_PERIOD_32SEC (uint32_t)0x00000000U /*!< Use a 32-second calibration cycle period */ +#define LL_RTC_CALIB_PERIOD_16SEC RTC_CALR_CALW16 /*!< Use a 16-second calibration cycle period */ +#define LL_RTC_CALIB_PERIOD_8SEC RTC_CALR_CALW8 /*!< Use a 8-second calibration cycle period */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup RTC_LL_Exported_Macros RTC Exported Macros + * @{ + */ + +/** @defgroup RTC_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in RTC register + * @param __INSTANCE__ RTC Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_RTC_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in RTC register + * @param __INSTANCE__ RTC Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_RTC_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** @defgroup RTC_LL_EM_Convert Convert helper Macros + * @{ + */ + +/** + * @brief Helper macro to convert a value from 2 digit decimal format to BCD format + * @param __VALUE__ Byte to be converted + * @retval Converted byte + */ +#define __LL_RTC_CONVERT_BIN2BCD(__VALUE__) (uint8_t)((((__VALUE__) / 10U) << 4U) | ((__VALUE__) % 10U)) + +/** + * @brief Helper macro to convert a value from BCD format to 2 digit decimal format + * @param __VALUE__ BCD value to be converted + * @retval Converted byte + */ +#define __LL_RTC_CONVERT_BCD2BIN(__VALUE__) (uint8_t)(((uint8_t)((__VALUE__) & (uint8_t)0xF0U) >> (uint8_t)0x4U) * 10U + ((__VALUE__) & (uint8_t)0x0FU)) + +/** + * @} + */ + +/** @defgroup RTC_LL_EM_Date Date helper Macros + * @{ + */ + +/** + * @brief Helper macro to retrieve weekday. + * @param __RTC_DATE__ Date returned by @ref LL_RTC_DATE_Get function. + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_WEEKDAY_MONDAY + * @arg @ref LL_RTC_WEEKDAY_TUESDAY + * @arg @ref LL_RTC_WEEKDAY_WEDNESDAY + * @arg @ref LL_RTC_WEEKDAY_THURSDAY + * @arg @ref LL_RTC_WEEKDAY_FRIDAY + * @arg @ref LL_RTC_WEEKDAY_SATURDAY + * @arg @ref LL_RTC_WEEKDAY_SUNDAY + */ +#define __LL_RTC_GET_WEEKDAY(__RTC_DATE__) (((__RTC_DATE__) >> RTC_OFFSET_WEEKDAY) & 0x000000FFU) + +/** + * @brief Helper macro to retrieve Year in BCD format + * @param __RTC_DATE__ Value returned by @ref LL_RTC_DATE_Get + * @retval Year in BCD format (0x00 . . . 0x99) + */ +#define __LL_RTC_GET_YEAR(__RTC_DATE__) ((__RTC_DATE__) & 0x000000FFU) + +/** + * @brief Helper macro to retrieve Month in BCD format + * @param __RTC_DATE__ Value returned by @ref LL_RTC_DATE_Get + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_MONTH_JANUARY + * @arg @ref LL_RTC_MONTH_FEBRUARY + * @arg @ref LL_RTC_MONTH_MARCH + * @arg @ref LL_RTC_MONTH_APRIL + * @arg @ref LL_RTC_MONTH_MAY + * @arg @ref LL_RTC_MONTH_JUNE + * @arg @ref LL_RTC_MONTH_JULY + * @arg @ref LL_RTC_MONTH_AUGUST + * @arg @ref LL_RTC_MONTH_SEPTEMBER + * @arg @ref LL_RTC_MONTH_OCTOBER + * @arg @ref LL_RTC_MONTH_NOVEMBER + * @arg @ref LL_RTC_MONTH_DECEMBER + */ +#define __LL_RTC_GET_MONTH(__RTC_DATE__) (((__RTC_DATE__) >>RTC_OFFSET_MONTH) & 0x000000FFU) + +/** + * @brief Helper macro to retrieve Day in BCD format + * @param __RTC_DATE__ Value returned by @ref LL_RTC_DATE_Get + * @retval Day in BCD format (0x01 . . . 0x31) + */ +#define __LL_RTC_GET_DAY(__RTC_DATE__) (((__RTC_DATE__) >>RTC_OFFSET_DAY) & 0x000000FFU) + +/** + * @} + */ + +/** @defgroup RTC_LL_EM_Time Time helper Macros + * @{ + */ + +/** + * @brief Helper macro to retrieve hour in BCD format + * @param __RTC_TIME__ RTC time returned by @ref LL_RTC_TIME_Get function + * @retval Hours in BCD format (0x01. . .0x12 or between Min_Data=0x00 and Max_Data=0x23) + */ +#define __LL_RTC_GET_HOUR(__RTC_TIME__) (((__RTC_TIME__) >> RTC_OFFSET_HOUR) & 0x000000FFU) + +/** + * @brief Helper macro to retrieve minute in BCD format + * @param __RTC_TIME__ RTC time returned by @ref LL_RTC_TIME_Get function + * @retval Minutes in BCD format (0x00. . .0x59) + */ +#define __LL_RTC_GET_MINUTE(__RTC_TIME__) (((__RTC_TIME__) >> RTC_OFFSET_MINUTE) & 0x000000FFU) + +/** + * @brief Helper macro to retrieve second in BCD format + * @param __RTC_TIME__ RTC time returned by @ref LL_RTC_TIME_Get function + * @retval Seconds in format (0x00. . .0x59) + */ +#define __LL_RTC_GET_SECOND(__RTC_TIME__) ((__RTC_TIME__) & 0x000000FFU) + +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup RTC_LL_Exported_Functions RTC Exported Functions + * @{ + */ + +/** @defgroup RTC_LL_EF_Configuration Configuration + * @{ + */ + +/** + * @brief Set Hours format (24 hour/day or AM/PM hour format) + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @note It can be written in initialization mode only (@ref LL_RTC_EnableInitMode function) + * @rmtoll CR FMT LL_RTC_SetHourFormat + * @param RTCx RTC Instance + * @param HourFormat This parameter can be one of the following values: + * @arg @ref LL_RTC_HOURFORMAT_24HOUR + * @arg @ref LL_RTC_HOURFORMAT_AMPM + * @retval None + */ +__STATIC_INLINE void LL_RTC_SetHourFormat(RTC_TypeDef *RTCx, uint32_t HourFormat) +{ + MODIFY_REG(RTCx->CR, RTC_CR_FMT, HourFormat); +} + +/** + * @brief Get Hours format (24 hour/day or AM/PM hour format) + * @rmtoll CR FMT LL_RTC_GetHourFormat + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_HOURFORMAT_24HOUR + * @arg @ref LL_RTC_HOURFORMAT_AMPM + */ +__STATIC_INLINE uint32_t LL_RTC_GetHourFormat(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->CR, RTC_CR_FMT)); +} + +/** + * @brief Select the flag to be routed to RTC_ALARM output + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll CR OSEL LL_RTC_SetAlarmOutEvent + * @param RTCx RTC Instance + * @param AlarmOutput This parameter can be one of the following values: + * @arg @ref LL_RTC_ALARMOUT_DISABLE + * @arg @ref LL_RTC_ALARMOUT_ALMA + * @arg @ref LL_RTC_ALARMOUT_ALMB + * @arg @ref LL_RTC_ALARMOUT_WAKEUP + * @retval None + */ +__STATIC_INLINE void LL_RTC_SetAlarmOutEvent(RTC_TypeDef *RTCx, uint32_t AlarmOutput) +{ + MODIFY_REG(RTCx->CR, RTC_CR_OSEL, AlarmOutput); +} + +/** + * @brief Get the flag to be routed to RTC_ALARM output + * @rmtoll CR OSEL LL_RTC_GetAlarmOutEvent + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_ALARMOUT_DISABLE + * @arg @ref LL_RTC_ALARMOUT_ALMA + * @arg @ref LL_RTC_ALARMOUT_ALMB + * @arg @ref LL_RTC_ALARMOUT_WAKEUP + */ +__STATIC_INLINE uint32_t LL_RTC_GetAlarmOutEvent(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->CR, RTC_CR_OSEL)); +} + +/** + * @brief Set RTC_ALARM output type (ALARM in push-pull or open-drain output) + * @note Used only when RTC_ALARM is mapped on PC13 + * @rmtoll TAFCR ALARMOUTTYPE LL_RTC_SetAlarmOutputType + * @param RTCx RTC Instance + * @param Output This parameter can be one of the following values: + * @arg @ref LL_RTC_ALARM_OUTPUTTYPE_OPENDRAIN + * @arg @ref LL_RTC_ALARM_OUTPUTTYPE_PUSHPULL + * @retval None + */ +__STATIC_INLINE void LL_RTC_SetAlarmOutputType(RTC_TypeDef *RTCx, uint32_t Output) +{ + MODIFY_REG(RTCx->TAFCR, RTC_TAFCR_ALARMOUTTYPE, Output); +} + +/** + * @brief Get RTC_ALARM output type (ALARM in push-pull or open-drain output) + * @note used only when RTC_ALARM is mapped on PC13 + * @rmtoll TAFCR ALARMOUTTYPE LL_RTC_GetAlarmOutputType + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_ALARM_OUTPUTTYPE_OPENDRAIN + * @arg @ref LL_RTC_ALARM_OUTPUTTYPE_PUSHPULL + */ +__STATIC_INLINE uint32_t LL_RTC_GetAlarmOutputType(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->TAFCR, RTC_TAFCR_ALARMOUTTYPE)); +} + +/** + * @brief Enable initialization mode + * @note Initialization mode is used to program time and date register (RTC_TR and RTC_DR) + * and prescaler register (RTC_PRER). + * Counters are stopped and start counting from the new value when INIT is reset. + * @rmtoll ISR INIT LL_RTC_EnableInitMode + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableInitMode(RTC_TypeDef *RTCx) +{ + /* Set the Initialization mode */ + WRITE_REG(RTCx->ISR, RTC_INIT_MASK); +} + +/** + * @brief Disable initialization mode (Free running mode) + * @rmtoll ISR INIT LL_RTC_DisableInitMode + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableInitMode(RTC_TypeDef *RTCx) +{ + /* Exit Initialization mode */ + WRITE_REG(RTCx->ISR, (uint32_t)~RTC_ISR_INIT); +} + +/** + * @brief Set Output polarity (pin is low when ALRAF/ALRBF/WUTF is asserted) + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll CR POL LL_RTC_SetOutputPolarity + * @param RTCx RTC Instance + * @param Polarity This parameter can be one of the following values: + * @arg @ref LL_RTC_OUTPUTPOLARITY_PIN_HIGH + * @arg @ref LL_RTC_OUTPUTPOLARITY_PIN_LOW + * @retval None + */ +__STATIC_INLINE void LL_RTC_SetOutputPolarity(RTC_TypeDef *RTCx, uint32_t Polarity) +{ + MODIFY_REG(RTCx->CR, RTC_CR_POL, Polarity); +} + +/** + * @brief Get Output polarity + * @rmtoll CR POL LL_RTC_GetOutputPolarity + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_OUTPUTPOLARITY_PIN_HIGH + * @arg @ref LL_RTC_OUTPUTPOLARITY_PIN_LOW + */ +__STATIC_INLINE uint32_t LL_RTC_GetOutputPolarity(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->CR, RTC_CR_POL)); +} + +#if defined(RTC_CR_BYPSHAD) +/** + * @brief Enable Bypass the shadow registers + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll CR BYPSHAD LL_RTC_EnableShadowRegBypass + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableShadowRegBypass(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->CR, RTC_CR_BYPSHAD); +} + +/** + * @brief Disable Bypass the shadow registers + * @rmtoll CR BYPSHAD LL_RTC_DisableShadowRegBypass + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableShadowRegBypass(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->CR, RTC_CR_BYPSHAD); +} + +/** + * @brief Check if Shadow registers bypass is enabled or not. + * @rmtoll CR BYPSHAD LL_RTC_IsShadowRegBypassEnabled + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsShadowRegBypassEnabled(RTC_TypeDef *RTCx) +{ + return (READ_BIT(RTCx->CR, RTC_CR_BYPSHAD) == (RTC_CR_BYPSHAD)); +} + +#endif /* RTC_CR_BYPSHAD */ +/** + * @brief Enable RTC_REFIN reference clock detection (50 or 60 Hz) + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @note It can be written in initialization mode only (@ref LL_RTC_EnableInitMode function) + * @rmtoll CR REFCKON LL_RTC_EnableRefClock + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableRefClock(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->CR, RTC_CR_REFCKON); +} + +/** + * @brief Disable RTC_REFIN reference clock detection (50 or 60 Hz) + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @note It can be written in initialization mode only (@ref LL_RTC_EnableInitMode function) + * @rmtoll CR REFCKON LL_RTC_DisableRefClock + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableRefClock(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->CR, RTC_CR_REFCKON); +} + +/** + * @brief Set Asynchronous prescaler factor + * @rmtoll PRER PREDIV_A LL_RTC_SetAsynchPrescaler + * @param RTCx RTC Instance + * @param AsynchPrescaler Value between Min_Data = 0 and Max_Data = 0x7F + * @retval None + */ +__STATIC_INLINE void LL_RTC_SetAsynchPrescaler(RTC_TypeDef *RTCx, uint32_t AsynchPrescaler) +{ + MODIFY_REG(RTCx->PRER, RTC_PRER_PREDIV_A, AsynchPrescaler << RTC_POSITION_PRER_PREDIV_A); +} + +/** + * @brief Set Synchronous prescaler factor + * @rmtoll PRER PREDIV_S LL_RTC_SetSynchPrescaler + * @param RTCx RTC Instance + * @param SynchPrescaler Value between Min_Data = 0 and Max_Data = 0x7FFF + * @retval None + */ +__STATIC_INLINE void LL_RTC_SetSynchPrescaler(RTC_TypeDef *RTCx, uint32_t SynchPrescaler) +{ + MODIFY_REG(RTCx->PRER, RTC_PRER_PREDIV_S, SynchPrescaler); +} + +/** + * @brief Get Asynchronous prescaler factor + * @rmtoll PRER PREDIV_A LL_RTC_GetAsynchPrescaler + * @param RTCx RTC Instance + * @retval Value between Min_Data = 0 and Max_Data = 0x7F + */ +__STATIC_INLINE uint32_t LL_RTC_GetAsynchPrescaler(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->PRER, RTC_PRER_PREDIV_A) >> RTC_POSITION_PRER_PREDIV_A); +} + +/** + * @brief Get Synchronous prescaler factor + * @rmtoll PRER PREDIV_S LL_RTC_GetSynchPrescaler + * @param RTCx RTC Instance + * @retval Value between Min_Data = 0 and Max_Data = 0x7FFF + */ +__STATIC_INLINE uint32_t LL_RTC_GetSynchPrescaler(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->PRER, RTC_PRER_PREDIV_S)); +} + +/** + * @brief Enable the write protection for RTC registers. + * @rmtoll WPR KEY LL_RTC_EnableWriteProtection + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableWriteProtection(RTC_TypeDef *RTCx) +{ + WRITE_REG(RTCx->WPR, RTC_WRITE_PROTECTION_DISABLE); +} + +/** + * @brief Disable the write protection for RTC registers. + * @rmtoll WPR KEY LL_RTC_DisableWriteProtection + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableWriteProtection(RTC_TypeDef *RTCx) +{ + WRITE_REG(RTCx->WPR, RTC_WRITE_PROTECTION_ENABLE_1); + WRITE_REG(RTCx->WPR, RTC_WRITE_PROTECTION_ENABLE_2); +} + +/** + * @} + */ + +/** @defgroup RTC_LL_EF_Time Time + * @{ + */ + +/** + * @brief Set time format (AM/24-hour or PM notation) + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @note It can be written in initialization mode only (@ref LL_RTC_EnableInitMode function) + * @rmtoll TR PM LL_RTC_TIME_SetFormat + * @param RTCx RTC Instance + * @param TimeFormat This parameter can be one of the following values: + * @arg @ref LL_RTC_TIME_FORMAT_AM_OR_24 + * @arg @ref LL_RTC_TIME_FORMAT_PM + * @retval None + */ +__STATIC_INLINE void LL_RTC_TIME_SetFormat(RTC_TypeDef *RTCx, uint32_t TimeFormat) +{ + MODIFY_REG(RTCx->TR, RTC_TR_PM, TimeFormat); +} + +/** + * @brief Get time format (AM or PM notation) + * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set + * before reading this bit + * @note Read either RTC_SSR or RTC_TR locks the values in the higher-order calendar + * shadow registers until RTC_DR is read (LL_RTC_ReadReg(RTC, DR)). + * @rmtoll TR PM LL_RTC_TIME_GetFormat + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_TIME_FORMAT_AM_OR_24 + * @arg @ref LL_RTC_TIME_FORMAT_PM + */ +__STATIC_INLINE uint32_t LL_RTC_TIME_GetFormat(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->TR, RTC_TR_PM)); +} + +/** + * @brief Set Hours in BCD format + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @note It can be written in initialization mode only (@ref LL_RTC_EnableInitMode function) + * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert hour from binary to BCD format + * @rmtoll TR HT LL_RTC_TIME_SetHour\n + * TR HU LL_RTC_TIME_SetHour + * @param RTCx RTC Instance + * @param Hours Value between Min_Data=0x01 and Max_Data=0x12 or between Min_Data=0x00 and Max_Data=0x23 + * @retval None + */ +__STATIC_INLINE void LL_RTC_TIME_SetHour(RTC_TypeDef *RTCx, uint32_t Hours) +{ + MODIFY_REG(RTCx->TR, (RTC_TR_HT | RTC_TR_HU), + (((Hours & 0xF0U) << (RTC_POSITION_TR_HT - 4U)) | ((Hours & 0x0FU) << RTC_POSITION_TR_HU))); +} + +/** + * @brief Get Hours in BCD format + * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set + * before reading this bit + * @note Read either RTC_SSR or RTC_TR locks the values in the higher-order calendar + * shadow registers until RTC_DR is read (LL_RTC_ReadReg(RTC, DR)). + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert hour from BCD to + * Binary format + * @rmtoll TR HT LL_RTC_TIME_GetHour\n + * TR HU LL_RTC_TIME_GetHour + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x01 and Max_Data=0x12 or between Min_Data=0x00 and Max_Data=0x23 + */ +__STATIC_INLINE uint32_t LL_RTC_TIME_GetHour(RTC_TypeDef *RTCx) +{ + register uint32_t temp = 0U; + + temp = READ_BIT(RTCx->TR, (RTC_TR_HT | RTC_TR_HU)); + return (uint32_t)((((temp & RTC_TR_HT) >> RTC_POSITION_TR_HT) << 4U) | ((temp & RTC_TR_HU) >> RTC_POSITION_TR_HU)); +} + +/** + * @brief Set Minutes in BCD format + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @note It can be written in initialization mode only (@ref LL_RTC_EnableInitMode function) + * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert Minutes from binary to BCD format + * @rmtoll TR MNT LL_RTC_TIME_SetMinute\n + * TR MNU LL_RTC_TIME_SetMinute + * @param RTCx RTC Instance + * @param Minutes Value between Min_Data=0x00 and Max_Data=0x59 + * @retval None + */ +__STATIC_INLINE void LL_RTC_TIME_SetMinute(RTC_TypeDef *RTCx, uint32_t Minutes) +{ + MODIFY_REG(RTCx->TR, (RTC_TR_MNT | RTC_TR_MNU), + (((Minutes & 0xF0U) << (RTC_POSITION_TR_MT - 4U)) | ((Minutes & 0x0FU) << RTC_POSITION_TR_MU))); +} + +/** + * @brief Get Minutes in BCD format + * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set + * before reading this bit + * @note Read either RTC_SSR or RTC_TR locks the values in the higher-order calendar + * shadow registers until RTC_DR is read (LL_RTC_ReadReg(RTC, DR)). + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert minute from BCD + * to Binary format + * @rmtoll TR MNT LL_RTC_TIME_GetMinute\n + * TR MNU LL_RTC_TIME_GetMinute + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x00 and Max_Data=0x59 + */ +__STATIC_INLINE uint32_t LL_RTC_TIME_GetMinute(RTC_TypeDef *RTCx) +{ + register uint32_t temp = 0U; + + temp = READ_BIT(RTCx->TR, (RTC_TR_MNT | RTC_TR_MNU)); + return (uint32_t)((((temp & RTC_TR_MNT) >> RTC_POSITION_TR_MT) << 4U) | ((temp & RTC_TR_MNU) >> RTC_POSITION_TR_MU)); +} + +/** + * @brief Set Seconds in BCD format + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @note It can be written in initialization mode only (@ref LL_RTC_EnableInitMode function) + * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert Seconds from binary to BCD format + * @rmtoll TR ST LL_RTC_TIME_SetSecond\n + * TR SU LL_RTC_TIME_SetSecond + * @param RTCx RTC Instance + * @param Seconds Value between Min_Data=0x00 and Max_Data=0x59 + * @retval None + */ +__STATIC_INLINE void LL_RTC_TIME_SetSecond(RTC_TypeDef *RTCx, uint32_t Seconds) +{ + MODIFY_REG(RTCx->TR, (RTC_TR_ST | RTC_TR_SU), + (((Seconds & 0xF0U) << (RTC_POSITION_TR_ST - 4U)) | ((Seconds & 0x0FU) << RTC_POSITION_TR_SU))); +} + +/** + * @brief Get Seconds in BCD format + * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set + * before reading this bit + * @note Read either RTC_SSR or RTC_TR locks the values in the higher-order calendar + * shadow registers until RTC_DR is read (LL_RTC_ReadReg(RTC, DR)). + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Seconds from BCD + * to Binary format + * @rmtoll TR ST LL_RTC_TIME_GetSecond\n + * TR SU LL_RTC_TIME_GetSecond + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x00 and Max_Data=0x59 + */ +__STATIC_INLINE uint32_t LL_RTC_TIME_GetSecond(RTC_TypeDef *RTCx) +{ + register uint32_t temp = 0U; + + temp = READ_BIT(RTCx->TR, (RTC_TR_ST | RTC_TR_SU)); + return (uint32_t)((((temp & RTC_TR_ST) >> RTC_POSITION_TR_ST) << 4U) | ((temp & RTC_TR_SU) >> RTC_POSITION_TR_SU)); +} + +/** + * @brief Set time (hour, minute and second) in BCD format + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @note It can be written in initialization mode only (@ref LL_RTC_EnableInitMode function) + * @note TimeFormat and Hours should follow the same format + * @rmtoll TR PM LL_RTC_TIME_Config\n + * TR HT LL_RTC_TIME_Config\n + * TR HU LL_RTC_TIME_Config\n + * TR MNT LL_RTC_TIME_Config\n + * TR MNU LL_RTC_TIME_Config\n + * TR ST LL_RTC_TIME_Config\n + * TR SU LL_RTC_TIME_Config + * @param RTCx RTC Instance + * @param Format12_24 This parameter can be one of the following values: + * @arg @ref LL_RTC_TIME_FORMAT_AM_OR_24 + * @arg @ref LL_RTC_TIME_FORMAT_PM + * @param Hours Value between Min_Data=0x01 and Max_Data=0x12 or between Min_Data=0x00 and Max_Data=0x23 + * @param Minutes Value between Min_Data=0x00 and Max_Data=0x59 + * @param Seconds Value between Min_Data=0x00 and Max_Data=0x59 + * @retval None + */ +__STATIC_INLINE void LL_RTC_TIME_Config(RTC_TypeDef *RTCx, uint32_t Format12_24, uint32_t Hours, uint32_t Minutes, uint32_t Seconds) +{ + register uint32_t temp = 0U; + + temp = Format12_24 | \ + (((Hours & 0xF0U) << (RTC_POSITION_TR_HT - 4U)) | ((Hours & 0x0FU) << RTC_POSITION_TR_HU)) | \ + (((Minutes & 0xF0U) << (RTC_POSITION_TR_MT - 4U)) | ((Minutes & 0x0FU) << RTC_POSITION_TR_MU)) | \ + (((Seconds & 0xF0U) << (RTC_POSITION_TR_ST - 4U)) | ((Seconds & 0x0FU) << RTC_POSITION_TR_SU)); + MODIFY_REG(RTCx->TR, (RTC_TR_PM | RTC_TR_HT | RTC_TR_HU | RTC_TR_MNT | RTC_TR_MNU | RTC_TR_ST | RTC_TR_SU), temp); +} + +/** + * @brief Get time (hour, minute and second) in BCD format + * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set + * before reading this bit + * @note Read either RTC_SSR or RTC_TR locks the values in the higher-order calendar + * shadow registers until RTC_DR is read (LL_RTC_ReadReg(RTC, DR)). + * @note helper macros __LL_RTC_GET_HOUR, __LL_RTC_GET_MINUTE and __LL_RTC_GET_SECOND + * are available to get independently each parameter. + * @rmtoll TR HT LL_RTC_TIME_Get\n + * TR HU LL_RTC_TIME_Get\n + * TR MNT LL_RTC_TIME_Get\n + * TR MNU LL_RTC_TIME_Get\n + * TR ST LL_RTC_TIME_Get\n + * TR SU LL_RTC_TIME_Get + * @param RTCx RTC Instance + * @retval Combination of hours, minutes and seconds (Format: 0x00HHMMSS). + */ +__STATIC_INLINE uint32_t LL_RTC_TIME_Get(RTC_TypeDef *RTCx) +{ + return (uint32_t)((LL_RTC_TIME_GetHour(RTCx) << RTC_OFFSET_HOUR) | (LL_RTC_TIME_GetMinute(RTCx) << RTC_OFFSET_MINUTE) | LL_RTC_TIME_GetSecond(RTCx)); +} + +/** + * @brief Memorize whether the daylight saving time change has been performed + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll CR BCK LL_RTC_TIME_EnableDayLightStore + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_TIME_EnableDayLightStore(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->CR, RTC_CR_BCK); +} + +/** + * @brief Disable memorization whether the daylight saving time change has been performed. + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll CR BCK LL_RTC_TIME_DisableDayLightStore + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_TIME_DisableDayLightStore(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->CR, RTC_CR_BCK); +} + +/** + * @brief Check if RTC Day Light Saving stored operation has been enabled or not + * @rmtoll CR BCK LL_RTC_TIME_IsDayLightStoreEnabled + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_TIME_IsDayLightStoreEnabled(RTC_TypeDef *RTCx) +{ + return (READ_BIT(RTCx->CR, RTC_CR_BCK) == (RTC_CR_BCK)); +} + +/** + * @brief Subtract 1 hour (winter time change) + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll CR SUB1H LL_RTC_TIME_DecHour + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_TIME_DecHour(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->CR, RTC_CR_SUB1H); +} + +/** + * @brief Add 1 hour (summer time change) + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll CR ADD1H LL_RTC_TIME_IncHour + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_TIME_IncHour(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->CR, RTC_CR_ADD1H); +} + +#if defined(RTC_SUBSECOND_SUPPORT) +/** + * @brief Get Sub second value in the synchronous prescaler counter. + * @note You can use both SubSeconds value and SecondFraction (PREDIV_S through + * LL_RTC_GetSynchPrescaler function) terms returned to convert Calendar + * SubSeconds value in second fraction ratio with time unit following + * generic formula: + * ==> Seconds fraction ratio * time_unit= [(SecondFraction-SubSeconds)/(SecondFraction+1)] * time_unit + * This conversion can be performed only if no shift operation is pending + * (ie. SHFP=0) when PREDIV_S >= SS. + * @rmtoll SSR SS LL_RTC_TIME_GetSubSecond + * @param RTCx RTC Instance + * @retval Sub second value (number between 0 and 65535) + */ +__STATIC_INLINE uint32_t LL_RTC_TIME_GetSubSecond(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->SSR, RTC_SSR_SS)); +} +#endif /* RTC_SUBSECOND_SUPPORT */ + +#if defined(RTC_SHIFTR_ADD1S) +/** + * @brief Synchronize to a remote clock with a high degree of precision. + * @note This operation effectively subtracts from (delays) or advance the clock of a fraction of a second. + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @note When REFCKON is set, firmware must not write to Shift control register. + * @rmtoll SHIFTR ADD1S LL_RTC_TIME_Synchronize\n + * SHIFTR SUBFS LL_RTC_TIME_Synchronize + * @param RTCx RTC Instance + * @param ShiftSecond This parameter can be one of the following values: + * @arg @ref LL_RTC_SHIFT_SECOND_DELAY + * @arg @ref LL_RTC_SHIFT_SECOND_ADVANCE + * @param Fraction Number of Seconds Fractions (any value from 0 to 0x7FFF) + * @retval None + */ +__STATIC_INLINE void LL_RTC_TIME_Synchronize(RTC_TypeDef *RTCx, uint32_t ShiftSecond, uint32_t Fraction) +{ + WRITE_REG(RTCx->SHIFTR, ShiftSecond | Fraction); +} +#endif /* RTC_SHIFTR_ADD1S */ + +/** + * @} + */ + +/** @defgroup RTC_LL_EF_Date Date + * @{ + */ + +/** + * @brief Set Year in BCD format + * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert Year from binary to BCD format + * @rmtoll DR YT LL_RTC_DATE_SetYear\n + * DR YU LL_RTC_DATE_SetYear + * @param RTCx RTC Instance + * @param Year Value between Min_Data=0x00 and Max_Data=0x99 + * @retval None + */ +__STATIC_INLINE void LL_RTC_DATE_SetYear(RTC_TypeDef *RTCx, uint32_t Year) +{ + MODIFY_REG(RTCx->DR, (RTC_DR_YT | RTC_DR_YU), + (((Year & 0xF0U) << (RTC_POSITION_DR_YT - 4U)) | ((Year & 0x0FU) << RTC_POSITION_DR_YU))); +} + +/** + * @brief Get Year in BCD format + * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set + * before reading this bit + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Year from BCD to Binary format + * @rmtoll DR YT LL_RTC_DATE_GetYear\n + * DR YU LL_RTC_DATE_GetYear + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x00 and Max_Data=0x99 + */ +__STATIC_INLINE uint32_t LL_RTC_DATE_GetYear(RTC_TypeDef *RTCx) +{ + register uint32_t temp = 0U; + + temp = READ_BIT(RTCx->DR, (RTC_DR_YT | RTC_DR_YU)); + return (uint32_t)((((temp & RTC_DR_YT) >> RTC_POSITION_DR_YT) << 4U) | ((temp & RTC_DR_YU) >> RTC_POSITION_DR_YU)); +} + +/** + * @brief Set Week day + * @rmtoll DR WDU LL_RTC_DATE_SetWeekDay + * @param RTCx RTC Instance + * @param WeekDay This parameter can be one of the following values: + * @arg @ref LL_RTC_WEEKDAY_MONDAY + * @arg @ref LL_RTC_WEEKDAY_TUESDAY + * @arg @ref LL_RTC_WEEKDAY_WEDNESDAY + * @arg @ref LL_RTC_WEEKDAY_THURSDAY + * @arg @ref LL_RTC_WEEKDAY_FRIDAY + * @arg @ref LL_RTC_WEEKDAY_SATURDAY + * @arg @ref LL_RTC_WEEKDAY_SUNDAY + * @retval None + */ +__STATIC_INLINE void LL_RTC_DATE_SetWeekDay(RTC_TypeDef *RTCx, uint32_t WeekDay) +{ + MODIFY_REG(RTCx->DR, RTC_DR_WDU, WeekDay << RTC_POSITION_DR_WDU); +} + +/** + * @brief Get Week day + * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set + * before reading this bit + * @rmtoll DR WDU LL_RTC_DATE_GetWeekDay + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_WEEKDAY_MONDAY + * @arg @ref LL_RTC_WEEKDAY_TUESDAY + * @arg @ref LL_RTC_WEEKDAY_WEDNESDAY + * @arg @ref LL_RTC_WEEKDAY_THURSDAY + * @arg @ref LL_RTC_WEEKDAY_FRIDAY + * @arg @ref LL_RTC_WEEKDAY_SATURDAY + * @arg @ref LL_RTC_WEEKDAY_SUNDAY + */ +__STATIC_INLINE uint32_t LL_RTC_DATE_GetWeekDay(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->DR, RTC_DR_WDU) >> RTC_POSITION_DR_WDU); +} + +/** + * @brief Set Month in BCD format + * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert Month from binary to BCD format + * @rmtoll DR MT LL_RTC_DATE_SetMonth\n + * DR MU LL_RTC_DATE_SetMonth + * @param RTCx RTC Instance + * @param Month This parameter can be one of the following values: + * @arg @ref LL_RTC_MONTH_JANUARY + * @arg @ref LL_RTC_MONTH_FEBRUARY + * @arg @ref LL_RTC_MONTH_MARCH + * @arg @ref LL_RTC_MONTH_APRIL + * @arg @ref LL_RTC_MONTH_MAY + * @arg @ref LL_RTC_MONTH_JUNE + * @arg @ref LL_RTC_MONTH_JULY + * @arg @ref LL_RTC_MONTH_AUGUST + * @arg @ref LL_RTC_MONTH_SEPTEMBER + * @arg @ref LL_RTC_MONTH_OCTOBER + * @arg @ref LL_RTC_MONTH_NOVEMBER + * @arg @ref LL_RTC_MONTH_DECEMBER + * @retval None + */ +__STATIC_INLINE void LL_RTC_DATE_SetMonth(RTC_TypeDef *RTCx, uint32_t Month) +{ + MODIFY_REG(RTCx->DR, (RTC_DR_MT | RTC_DR_MU), + (((Month & 0xF0U) << (RTC_POSITION_DR_MT - 4U)) | ((Month & 0x0FU) << RTC_POSITION_DR_MU))); +} + +/** + * @brief Get Month in BCD format + * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set + * before reading this bit + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Month from BCD to Binary format + * @rmtoll DR MT LL_RTC_DATE_GetMonth\n + * DR MU LL_RTC_DATE_GetMonth + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_MONTH_JANUARY + * @arg @ref LL_RTC_MONTH_FEBRUARY + * @arg @ref LL_RTC_MONTH_MARCH + * @arg @ref LL_RTC_MONTH_APRIL + * @arg @ref LL_RTC_MONTH_MAY + * @arg @ref LL_RTC_MONTH_JUNE + * @arg @ref LL_RTC_MONTH_JULY + * @arg @ref LL_RTC_MONTH_AUGUST + * @arg @ref LL_RTC_MONTH_SEPTEMBER + * @arg @ref LL_RTC_MONTH_OCTOBER + * @arg @ref LL_RTC_MONTH_NOVEMBER + * @arg @ref LL_RTC_MONTH_DECEMBER + */ +__STATIC_INLINE uint32_t LL_RTC_DATE_GetMonth(RTC_TypeDef *RTCx) +{ + register uint32_t temp = 0U; + + temp = READ_BIT(RTCx->DR, (RTC_DR_MT | RTC_DR_MU)); + return (uint32_t)((((temp & RTC_DR_MT) >> RTC_POSITION_DR_MT) << 4U) | ((temp & RTC_DR_MU) >> RTC_POSITION_DR_MU)); +} + +/** + * @brief Set Day in BCD format + * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert Day from binary to BCD format + * @rmtoll DR DT LL_RTC_DATE_SetDay\n + * DR DU LL_RTC_DATE_SetDay + * @param RTCx RTC Instance + * @param Day Value between Min_Data=0x01 and Max_Data=0x31 + * @retval None + */ +__STATIC_INLINE void LL_RTC_DATE_SetDay(RTC_TypeDef *RTCx, uint32_t Day) +{ + MODIFY_REG(RTCx->DR, (RTC_DR_DT | RTC_DR_DU), + (((Day & 0xF0U) << (RTC_POSITION_DR_DT - 4U)) | ((Day & 0x0FU) << RTC_POSITION_DR_DU))); +} + +/** + * @brief Get Day in BCD format + * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set + * before reading this bit + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Day from BCD to Binary format + * @rmtoll DR DT LL_RTC_DATE_GetDay\n + * DR DU LL_RTC_DATE_GetDay + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x01 and Max_Data=0x31 + */ +__STATIC_INLINE uint32_t LL_RTC_DATE_GetDay(RTC_TypeDef *RTCx) +{ + register uint32_t temp = 0U; + + temp = READ_BIT(RTCx->DR, (RTC_DR_DT | RTC_DR_DU)); + return (uint32_t)((((temp & RTC_DR_DT) >> RTC_POSITION_DR_DT) << 4U) | ((temp & RTC_DR_DU) >> RTC_POSITION_DR_DU)); +} + +/** + * @brief Set date (WeekDay, Day, Month and Year) in BCD format + * @rmtoll DR WDU LL_RTC_DATE_Config\n + * DR MT LL_RTC_DATE_Config\n + * DR MU LL_RTC_DATE_Config\n + * DR DT LL_RTC_DATE_Config\n + * DR DU LL_RTC_DATE_Config\n + * DR YT LL_RTC_DATE_Config\n + * DR YU LL_RTC_DATE_Config + * @param RTCx RTC Instance + * @param WeekDay This parameter can be one of the following values: + * @arg @ref LL_RTC_WEEKDAY_MONDAY + * @arg @ref LL_RTC_WEEKDAY_TUESDAY + * @arg @ref LL_RTC_WEEKDAY_WEDNESDAY + * @arg @ref LL_RTC_WEEKDAY_THURSDAY + * @arg @ref LL_RTC_WEEKDAY_FRIDAY + * @arg @ref LL_RTC_WEEKDAY_SATURDAY + * @arg @ref LL_RTC_WEEKDAY_SUNDAY + * @param Day Value between Min_Data=0x01 and Max_Data=0x31 + * @param Month This parameter can be one of the following values: + * @arg @ref LL_RTC_MONTH_JANUARY + * @arg @ref LL_RTC_MONTH_FEBRUARY + * @arg @ref LL_RTC_MONTH_MARCH + * @arg @ref LL_RTC_MONTH_APRIL + * @arg @ref LL_RTC_MONTH_MAY + * @arg @ref LL_RTC_MONTH_JUNE + * @arg @ref LL_RTC_MONTH_JULY + * @arg @ref LL_RTC_MONTH_AUGUST + * @arg @ref LL_RTC_MONTH_SEPTEMBER + * @arg @ref LL_RTC_MONTH_OCTOBER + * @arg @ref LL_RTC_MONTH_NOVEMBER + * @arg @ref LL_RTC_MONTH_DECEMBER + * @param Year Value between Min_Data=0x00 and Max_Data=0x99 + * @retval None + */ +__STATIC_INLINE void LL_RTC_DATE_Config(RTC_TypeDef *RTCx, uint32_t WeekDay, uint32_t Day, uint32_t Month, uint32_t Year) +{ + register uint32_t temp = 0U; + + temp = (WeekDay << RTC_POSITION_DR_WDU) | \ + (((Year & 0xF0U) << (RTC_POSITION_DR_YT - 4U)) | ((Year & 0x0FU) << RTC_POSITION_DR_YU)) | \ + (((Month & 0xF0U) << (RTC_POSITION_DR_MT - 4U)) | ((Month & 0x0FU) << RTC_POSITION_DR_MU)) | \ + (((Day & 0xF0U) << (RTC_POSITION_DR_DT - 4U)) | ((Day & 0x0FU) << RTC_POSITION_DR_DU)); + + MODIFY_REG(RTCx->DR, (RTC_DR_WDU | RTC_DR_MT | RTC_DR_MU | RTC_DR_DT | RTC_DR_DU | RTC_DR_YT | RTC_DR_YU), temp); +} + +/** + * @brief Get date (WeekDay, Day, Month and Year) in BCD format + * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set + * before reading this bit + * @note helper macros __LL_RTC_GET_WEEKDAY, __LL_RTC_GET_YEAR, __LL_RTC_GET_MONTH, + * and __LL_RTC_GET_DAY are available to get independently each parameter. + * @rmtoll DR WDU LL_RTC_DATE_Get\n + * DR MT LL_RTC_DATE_Get\n + * DR MU LL_RTC_DATE_Get\n + * DR DT LL_RTC_DATE_Get\n + * DR DU LL_RTC_DATE_Get\n + * DR YT LL_RTC_DATE_Get\n + * DR YU LL_RTC_DATE_Get + * @param RTCx RTC Instance + * @retval Combination of WeekDay, Day, Month and Year (Format: 0xWWDDMMYY). + */ +__STATIC_INLINE uint32_t LL_RTC_DATE_Get(RTC_TypeDef *RTCx) +{ + return (uint32_t)((LL_RTC_DATE_GetWeekDay(RTCx) << RTC_OFFSET_WEEKDAY) | (LL_RTC_DATE_GetDay(RTCx) << RTC_OFFSET_DAY) | (LL_RTC_DATE_GetMonth(RTCx) << RTC_OFFSET_MONTH) | LL_RTC_DATE_GetYear(RTCx)); +} + +/** + * @} + */ + +/** @defgroup RTC_LL_EF_ALARMA ALARMA + * @{ + */ + +/** + * @brief Enable Alarm A + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll CR ALRAE LL_RTC_ALMA_Enable + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMA_Enable(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->CR, RTC_CR_ALRAE); +} + +/** + * @brief Disable Alarm A + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll CR ALRAE LL_RTC_ALMA_Disable + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMA_Disable(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->CR, RTC_CR_ALRAE); +} + +/** + * @brief Specify the Alarm A masks. + * @rmtoll ALRMAR MSK4 LL_RTC_ALMA_SetMask\n + * ALRMAR MSK3 LL_RTC_ALMA_SetMask\n + * ALRMAR MSK2 LL_RTC_ALMA_SetMask\n + * ALRMAR MSK1 LL_RTC_ALMA_SetMask + * @param RTCx RTC Instance + * @param Mask This parameter can be a combination of the following values: + * @arg @ref LL_RTC_ALMA_MASK_NONE + * @arg @ref LL_RTC_ALMA_MASK_DATEWEEKDAY + * @arg @ref LL_RTC_ALMA_MASK_HOURS + * @arg @ref LL_RTC_ALMA_MASK_MINUTES + * @arg @ref LL_RTC_ALMA_MASK_SECONDS + * @arg @ref LL_RTC_ALMA_MASK_ALL + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMA_SetMask(RTC_TypeDef *RTCx, uint32_t Mask) +{ + MODIFY_REG(RTCx->ALRMAR, RTC_ALRMAR_MSK4 | RTC_ALRMAR_MSK3 | RTC_ALRMAR_MSK2 | RTC_ALRMAR_MSK1, Mask); +} + +/** + * @brief Get the Alarm A masks. + * @rmtoll ALRMAR MSK4 LL_RTC_ALMA_GetMask\n + * ALRMAR MSK3 LL_RTC_ALMA_GetMask\n + * ALRMAR MSK2 LL_RTC_ALMA_GetMask\n + * ALRMAR MSK1 LL_RTC_ALMA_GetMask + * @param RTCx RTC Instance + * @retval Returned value can be can be a combination of the following values: + * @arg @ref LL_RTC_ALMA_MASK_NONE + * @arg @ref LL_RTC_ALMA_MASK_DATEWEEKDAY + * @arg @ref LL_RTC_ALMA_MASK_HOURS + * @arg @ref LL_RTC_ALMA_MASK_MINUTES + * @arg @ref LL_RTC_ALMA_MASK_SECONDS + * @arg @ref LL_RTC_ALMA_MASK_ALL + */ +__STATIC_INLINE uint32_t LL_RTC_ALMA_GetMask(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->ALRMAR, RTC_ALRMAR_MSK4 | RTC_ALRMAR_MSK3 | RTC_ALRMAR_MSK2 | RTC_ALRMAR_MSK1)); +} + +/** + * @brief Enable AlarmA Week day selection (DU[3:0] represents the week day. DT[1:0] is do not care) + * @rmtoll ALRMAR WDSEL LL_RTC_ALMA_EnableWeekday + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMA_EnableWeekday(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->ALRMAR, RTC_ALRMAR_WDSEL); +} + +/** + * @brief Disable AlarmA Week day selection (DU[3:0] represents the date ) + * @rmtoll ALRMAR WDSEL LL_RTC_ALMA_DisableWeekday + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMA_DisableWeekday(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->ALRMAR, RTC_ALRMAR_WDSEL); +} + +/** + * @brief Set ALARM A Day in BCD format + * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert Day from binary to BCD format + * @rmtoll ALRMAR DT LL_RTC_ALMA_SetDay\n + * ALRMAR DU LL_RTC_ALMA_SetDay + * @param RTCx RTC Instance + * @param Day Value between Min_Data=0x01 and Max_Data=0x31 + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMA_SetDay(RTC_TypeDef *RTCx, uint32_t Day) +{ + MODIFY_REG(RTCx->ALRMAR, (RTC_ALRMAR_DT | RTC_ALRMAR_DU), + (((Day & 0xF0U) << (RTC_POSITION_ALMA_DT - 4U)) | ((Day & 0x0FU) << RTC_POSITION_ALMA_DU))); +} + +/** + * @brief Get ALARM A Day in BCD format + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Day from BCD to Binary format + * @rmtoll ALRMAR DT LL_RTC_ALMA_GetDay\n + * ALRMAR DU LL_RTC_ALMA_GetDay + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x01 and Max_Data=0x31 + */ +__STATIC_INLINE uint32_t LL_RTC_ALMA_GetDay(RTC_TypeDef *RTCx) +{ + register uint32_t temp = 0U; + + temp = READ_BIT(RTCx->ALRMAR, (RTC_ALRMAR_DT | RTC_ALRMAR_DU)); + return (uint32_t)((((temp & RTC_ALRMAR_DT) >> RTC_POSITION_ALMA_DT) << 4U) | ((temp & RTC_ALRMAR_DU) >> RTC_POSITION_ALMA_DU)); +} + +/** + * @brief Set ALARM A Weekday + * @rmtoll ALRMAR DU LL_RTC_ALMA_SetWeekDay + * @param RTCx RTC Instance + * @param WeekDay This parameter can be one of the following values: + * @arg @ref LL_RTC_WEEKDAY_MONDAY + * @arg @ref LL_RTC_WEEKDAY_TUESDAY + * @arg @ref LL_RTC_WEEKDAY_WEDNESDAY + * @arg @ref LL_RTC_WEEKDAY_THURSDAY + * @arg @ref LL_RTC_WEEKDAY_FRIDAY + * @arg @ref LL_RTC_WEEKDAY_SATURDAY + * @arg @ref LL_RTC_WEEKDAY_SUNDAY + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMA_SetWeekDay(RTC_TypeDef *RTCx, uint32_t WeekDay) +{ + MODIFY_REG(RTCx->ALRMAR, RTC_ALRMAR_DU, WeekDay << RTC_POSITION_ALMA_DU); +} + +/** + * @brief Get ALARM A Weekday + * @rmtoll ALRMAR DU LL_RTC_ALMA_GetWeekDay + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_WEEKDAY_MONDAY + * @arg @ref LL_RTC_WEEKDAY_TUESDAY + * @arg @ref LL_RTC_WEEKDAY_WEDNESDAY + * @arg @ref LL_RTC_WEEKDAY_THURSDAY + * @arg @ref LL_RTC_WEEKDAY_FRIDAY + * @arg @ref LL_RTC_WEEKDAY_SATURDAY + * @arg @ref LL_RTC_WEEKDAY_SUNDAY + */ +__STATIC_INLINE uint32_t LL_RTC_ALMA_GetWeekDay(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->ALRMAR, RTC_ALRMAR_DU) >> RTC_POSITION_ALMA_DU); +} + +/** + * @brief Set Alarm A time format (AM/24-hour or PM notation) + * @rmtoll ALRMAR PM LL_RTC_ALMA_SetTimeFormat + * @param RTCx RTC Instance + * @param TimeFormat This parameter can be one of the following values: + * @arg @ref LL_RTC_ALMA_TIME_FORMAT_AM + * @arg @ref LL_RTC_ALMA_TIME_FORMAT_PM + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMA_SetTimeFormat(RTC_TypeDef *RTCx, uint32_t TimeFormat) +{ + MODIFY_REG(RTCx->ALRMAR, RTC_ALRMAR_PM, TimeFormat); +} + +/** + * @brief Get Alarm A time format (AM or PM notation) + * @rmtoll ALRMAR PM LL_RTC_ALMA_GetTimeFormat + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_ALMA_TIME_FORMAT_AM + * @arg @ref LL_RTC_ALMA_TIME_FORMAT_PM + */ +__STATIC_INLINE uint32_t LL_RTC_ALMA_GetTimeFormat(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->ALRMAR, RTC_ALRMAR_PM)); +} + +/** + * @brief Set ALARM A Hours in BCD format + * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert Hours from binary to BCD format + * @rmtoll ALRMAR HT LL_RTC_ALMA_SetHour\n + * ALRMAR HU LL_RTC_ALMA_SetHour + * @param RTCx RTC Instance + * @param Hours Value between Min_Data=0x01 and Max_Data=0x12 or between Min_Data=0x00 and Max_Data=0x23 + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMA_SetHour(RTC_TypeDef *RTCx, uint32_t Hours) +{ + MODIFY_REG(RTCx->ALRMAR, (RTC_ALRMAR_HT | RTC_ALRMAR_HU), + (((Hours & 0xF0U) << (RTC_POSITION_ALMA_HT - 4U)) | ((Hours & 0x0FU) << RTC_POSITION_ALMA_HU))); +} + +/** + * @brief Get ALARM A Hours in BCD format + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Hours from BCD to Binary format + * @rmtoll ALRMAR HT LL_RTC_ALMA_GetHour\n + * ALRMAR HU LL_RTC_ALMA_GetHour + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x01 and Max_Data=0x12 or between Min_Data=0x00 and Max_Data=0x23 + */ +__STATIC_INLINE uint32_t LL_RTC_ALMA_GetHour(RTC_TypeDef *RTCx) +{ + register uint32_t temp = 0U; + + temp = READ_BIT(RTCx->ALRMAR, (RTC_ALRMAR_HT | RTC_ALRMAR_HU)); + return (uint32_t)((((temp & RTC_ALRMAR_HT) >> RTC_POSITION_ALMA_HT) << 4U) | ((temp & RTC_ALRMAR_HU) >> RTC_POSITION_ALMA_HU)); +} + +/** + * @brief Set ALARM A Minutes in BCD format + * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert Minutes from binary to BCD format + * @rmtoll ALRMAR MNT LL_RTC_ALMA_SetMinute\n + * ALRMAR MNU LL_RTC_ALMA_SetMinute + * @param RTCx RTC Instance + * @param Minutes Value between Min_Data=0x00 and Max_Data=0x59 + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMA_SetMinute(RTC_TypeDef *RTCx, uint32_t Minutes) +{ + MODIFY_REG(RTCx->ALRMAR, (RTC_ALRMAR_MNT | RTC_ALRMAR_MNU), + (((Minutes & 0xF0U) << (RTC_POSITION_ALMA_MT - 4U)) | ((Minutes & 0x0FU) << RTC_POSITION_ALMA_MU))); +} + +/** + * @brief Get ALARM A Minutes in BCD format + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Minutes from BCD to Binary format + * @rmtoll ALRMAR MNT LL_RTC_ALMA_GetMinute\n + * ALRMAR MNU LL_RTC_ALMA_GetMinute + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x00 and Max_Data=0x59 + */ +__STATIC_INLINE uint32_t LL_RTC_ALMA_GetMinute(RTC_TypeDef *RTCx) +{ + register uint32_t temp = 0U; + + temp = READ_BIT(RTCx->ALRMAR, (RTC_ALRMAR_MNT | RTC_ALRMAR_MNU)); + return (uint32_t)((((temp & RTC_ALRMAR_MNT) >> RTC_POSITION_ALMA_MT) << 4U) | ((temp & RTC_ALRMAR_MNU) >> RTC_POSITION_ALMA_MU)); +} + +/** + * @brief Set ALARM A Seconds in BCD format + * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert Seconds from binary to BCD format + * @rmtoll ALRMAR ST LL_RTC_ALMA_SetSecond\n + * ALRMAR SU LL_RTC_ALMA_SetSecond + * @param RTCx RTC Instance + * @param Seconds Value between Min_Data=0x00 and Max_Data=0x59 + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMA_SetSecond(RTC_TypeDef *RTCx, uint32_t Seconds) +{ + MODIFY_REG(RTCx->ALRMAR, (RTC_ALRMAR_ST | RTC_ALRMAR_SU), + (((Seconds & 0xF0U) << (RTC_POSITION_ALMA_ST - 4U)) | ((Seconds & 0x0FU) << RTC_POSITION_ALMA_SU))); +} + +/** + * @brief Get ALARM A Seconds in BCD format + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Seconds from BCD to Binary format + * @rmtoll ALRMAR ST LL_RTC_ALMA_GetSecond\n + * ALRMAR SU LL_RTC_ALMA_GetSecond + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x00 and Max_Data=0x59 + */ +__STATIC_INLINE uint32_t LL_RTC_ALMA_GetSecond(RTC_TypeDef *RTCx) +{ + register uint32_t temp = 0U; + + temp = READ_BIT(RTCx->ALRMAR, (RTC_ALRMAR_ST | RTC_ALRMAR_SU)); + return (uint32_t)((((temp & RTC_ALRMAR_ST) >> RTC_POSITION_ALMA_ST) << 4U) | ((temp & RTC_ALRMAR_SU) >> RTC_POSITION_ALMA_SU)); +} + +/** + * @brief Set Alarm A Time (hour, minute and second) in BCD format + * @rmtoll ALRMAR PM LL_RTC_ALMA_ConfigTime\n + * ALRMAR HT LL_RTC_ALMA_ConfigTime\n + * ALRMAR HU LL_RTC_ALMA_ConfigTime\n + * ALRMAR MNT LL_RTC_ALMA_ConfigTime\n + * ALRMAR MNU LL_RTC_ALMA_ConfigTime\n + * ALRMAR ST LL_RTC_ALMA_ConfigTime\n + * ALRMAR SU LL_RTC_ALMA_ConfigTime + * @param RTCx RTC Instance + * @param Format12_24 This parameter can be one of the following values: + * @arg @ref LL_RTC_ALMA_TIME_FORMAT_AM + * @arg @ref LL_RTC_ALMA_TIME_FORMAT_PM + * @param Hours Value between Min_Data=0x01 and Max_Data=0x12 or between Min_Data=0x00 and Max_Data=0x23 + * @param Minutes Value between Min_Data=0x00 and Max_Data=0x59 + * @param Seconds Value between Min_Data=0x00 and Max_Data=0x59 + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMA_ConfigTime(RTC_TypeDef *RTCx, uint32_t Format12_24, uint32_t Hours, uint32_t Minutes, uint32_t Seconds) +{ + register uint32_t temp = 0U; + + temp = Format12_24 | (((Hours & 0xF0U) << (RTC_POSITION_ALMA_HT - 4U)) | ((Hours & 0x0FU) << RTC_POSITION_ALMA_HU)) | \ + (((Minutes & 0xF0U) << (RTC_POSITION_ALMA_MT - 4U)) | ((Minutes & 0x0FU) << RTC_POSITION_ALMA_MU)) | \ + (((Seconds & 0xF0U) << (RTC_POSITION_ALMA_ST - 4U)) | ((Seconds & 0x0FU) << RTC_POSITION_ALMA_SU)); + + MODIFY_REG(RTCx->ALRMAR, RTC_ALRMAR_PM | RTC_ALRMAR_HT | RTC_ALRMAR_HU | RTC_ALRMAR_MNT | RTC_ALRMAR_MNU | RTC_ALRMAR_ST | RTC_ALRMAR_SU, temp); +} + +/** + * @brief Get Alarm B Time (hour, minute and second) in BCD format + * @note helper macros __LL_RTC_GET_HOUR, __LL_RTC_GET_MINUTE and __LL_RTC_GET_SECOND + * are available to get independently each parameter. + * @rmtoll ALRMAR HT LL_RTC_ALMA_GetTime\n + * ALRMAR HU LL_RTC_ALMA_GetTime\n + * ALRMAR MNT LL_RTC_ALMA_GetTime\n + * ALRMAR MNU LL_RTC_ALMA_GetTime\n + * ALRMAR ST LL_RTC_ALMA_GetTime\n + * ALRMAR SU LL_RTC_ALMA_GetTime + * @param RTCx RTC Instance + * @retval Combination of hours, minutes and seconds. + */ +__STATIC_INLINE uint32_t LL_RTC_ALMA_GetTime(RTC_TypeDef *RTCx) +{ + return (uint32_t)((LL_RTC_ALMA_GetHour(RTCx) << RTC_OFFSET_HOUR) | (LL_RTC_ALMA_GetMinute(RTCx) << RTC_OFFSET_MINUTE) | LL_RTC_ALMA_GetSecond(RTCx)); +} + +#if defined(RTC_SUBSECOND_SUPPORT) +/** + * @brief Set Alarm A Mask the most-significant bits starting at this bit + * @note This register can be written only when ALRAE is reset in RTC_CR register, + * or in initialization mode. + * @rmtoll ALRMASSR MASKSS LL_RTC_ALMA_SetSubSecondMask + * @param RTCx RTC Instance + * @param Mask Value between Min_Data=0x00 and Max_Data=0xF + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMA_SetSubSecondMask(RTC_TypeDef *RTCx, uint32_t Mask) +{ + MODIFY_REG(RTCx->ALRMASSR, RTC_ALRMASSR_MASKSS, Mask << RTC_POSITION_ALMA_MASKSS); +} + +/** + * @brief Get Alarm A Mask the most-significant bits starting at this bit + * @rmtoll ALRMASSR MASKSS LL_RTC_ALMA_GetSubSecondMask + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x00 and Max_Data=0xF + */ +__STATIC_INLINE uint32_t LL_RTC_ALMA_GetSubSecondMask(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->ALRMASSR, RTC_ALRMASSR_MASKSS) >> RTC_POSITION_ALMA_MASKSS); +} + +/** + * @brief Set Alarm A Sub seconds value + * @rmtoll ALRMASSR SS LL_RTC_ALMA_SetSubSecond + * @param RTCx RTC Instance + * @param Subsecond Value between Min_Data=0x00 and Max_Data=0x7FFF + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMA_SetSubSecond(RTC_TypeDef *RTCx, uint32_t Subsecond) +{ + MODIFY_REG(RTCx->ALRMASSR, RTC_ALRMASSR_SS, Subsecond); +} + +/** + * @brief Get Alarm A Sub seconds value + * @rmtoll ALRMASSR SS LL_RTC_ALMA_GetSubSecond + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x00 and Max_Data=0x7FFF + */ +__STATIC_INLINE uint32_t LL_RTC_ALMA_GetSubSecond(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->ALRMASSR, RTC_ALRMASSR_SS)); +} +#endif /* RTC_SUBSECOND_SUPPORT */ + +/** + * @} + */ + +/** @defgroup RTC_LL_EF_ALARMB ALARMB + * @{ + */ + +/** + * @brief Enable Alarm B + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll CR ALRBE LL_RTC_ALMB_Enable + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMB_Enable(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->CR, RTC_CR_ALRBE); +} + +/** + * @brief Disable Alarm B + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll CR ALRBE LL_RTC_ALMB_Disable + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMB_Disable(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->CR, RTC_CR_ALRBE); +} + +/** + * @brief Specify the Alarm B masks. + * @rmtoll ALRMBR MSK4 LL_RTC_ALMB_SetMask\n + * ALRMBR MSK3 LL_RTC_ALMB_SetMask\n + * ALRMBR MSK2 LL_RTC_ALMB_SetMask\n + * ALRMBR MSK1 LL_RTC_ALMB_SetMask + * @param RTCx RTC Instance + * @param Mask This parameter can be a combination of the following values: + * @arg @ref LL_RTC_ALMB_MASK_NONE + * @arg @ref LL_RTC_ALMB_MASK_DATEWEEKDAY + * @arg @ref LL_RTC_ALMB_MASK_HOURS + * @arg @ref LL_RTC_ALMB_MASK_MINUTES + * @arg @ref LL_RTC_ALMB_MASK_SECONDS + * @arg @ref LL_RTC_ALMB_MASK_ALL + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMB_SetMask(RTC_TypeDef *RTCx, uint32_t Mask) +{ + MODIFY_REG(RTCx->ALRMBR, RTC_ALRMBR_MSK4 | RTC_ALRMBR_MSK3 | RTC_ALRMBR_MSK2 | RTC_ALRMBR_MSK1, Mask); +} + +/** + * @brief Get the Alarm B masks. + * @rmtoll ALRMBR MSK4 LL_RTC_ALMB_GetMask\n + * ALRMBR MSK3 LL_RTC_ALMB_GetMask\n + * ALRMBR MSK2 LL_RTC_ALMB_GetMask\n + * ALRMBR MSK1 LL_RTC_ALMB_GetMask + * @param RTCx RTC Instance + * @retval Returned value can be can be a combination of the following values: + * @arg @ref LL_RTC_ALMB_MASK_NONE + * @arg @ref LL_RTC_ALMB_MASK_DATEWEEKDAY + * @arg @ref LL_RTC_ALMB_MASK_HOURS + * @arg @ref LL_RTC_ALMB_MASK_MINUTES + * @arg @ref LL_RTC_ALMB_MASK_SECONDS + * @arg @ref LL_RTC_ALMB_MASK_ALL + */ +__STATIC_INLINE uint32_t LL_RTC_ALMB_GetMask(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->ALRMBR, RTC_ALRMBR_MSK4 | RTC_ALRMBR_MSK3 | RTC_ALRMBR_MSK2 | RTC_ALRMBR_MSK1)); +} + +/** + * @brief Enable AlarmB Week day selection (DU[3:0] represents the week day. DT[1:0] is do not care) + * @rmtoll ALRMBR WDSEL LL_RTC_ALMB_EnableWeekday + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMB_EnableWeekday(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->ALRMBR, RTC_ALRMBR_WDSEL); +} + +/** + * @brief Disable AlarmB Week day selection (DU[3:0] represents the date ) + * @rmtoll ALRMBR WDSEL LL_RTC_ALMB_DisableWeekday + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMB_DisableWeekday(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->ALRMBR, RTC_ALRMBR_WDSEL); +} + +/** + * @brief Set ALARM B Day in BCD format + * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert Day from binary to BCD format + * @rmtoll ALRMBR DT LL_RTC_ALMB_SetDay\n + * ALRMBR DU LL_RTC_ALMB_SetDay + * @param RTCx RTC Instance + * @param Day Value between Min_Data=0x01 and Max_Data=0x31 + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMB_SetDay(RTC_TypeDef *RTCx, uint32_t Day) +{ + MODIFY_REG(RTC->ALRMBR, (RTC_ALRMBR_DT | RTC_ALRMBR_DU), + (((Day & 0xF0U) << (RTC_POSITION_ALMB_DT - 4U)) | ((Day & 0x0FU) << RTC_POSITION_ALMB_DU))); +} + +/** + * @brief Get ALARM B Day in BCD format + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Day from BCD to Binary format + * @rmtoll ALRMBR DT LL_RTC_ALMB_GetDay\n + * ALRMBR DU LL_RTC_ALMB_GetDay + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x01 and Max_Data=0x31 + */ +__STATIC_INLINE uint32_t LL_RTC_ALMB_GetDay(RTC_TypeDef *RTCx) +{ + register uint32_t temp = 0U; + + temp = READ_BIT(RTCx->ALRMBR, (RTC_ALRMBR_DT | RTC_ALRMBR_DU)); + return (uint32_t)((((temp & RTC_ALRMBR_DT) >> RTC_POSITION_ALMB_DT) << 4U) | ((temp & RTC_ALRMBR_DU) >> RTC_POSITION_ALMB_DU)); +} + +/** + * @brief Set ALARM B Weekday + * @rmtoll ALRMBR DU LL_RTC_ALMB_SetWeekDay + * @param RTCx RTC Instance + * @param WeekDay This parameter can be one of the following values: + * @arg @ref LL_RTC_WEEKDAY_MONDAY + * @arg @ref LL_RTC_WEEKDAY_TUESDAY + * @arg @ref LL_RTC_WEEKDAY_WEDNESDAY + * @arg @ref LL_RTC_WEEKDAY_THURSDAY + * @arg @ref LL_RTC_WEEKDAY_FRIDAY + * @arg @ref LL_RTC_WEEKDAY_SATURDAY + * @arg @ref LL_RTC_WEEKDAY_SUNDAY + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMB_SetWeekDay(RTC_TypeDef *RTCx, uint32_t WeekDay) +{ + MODIFY_REG(RTCx->ALRMBR, RTC_ALRMBR_DU, WeekDay << RTC_POSITION_ALMB_DU); +} + +/** + * @brief Get ALARM B Weekday + * @rmtoll ALRMBR DU LL_RTC_ALMB_GetWeekDay + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_WEEKDAY_MONDAY + * @arg @ref LL_RTC_WEEKDAY_TUESDAY + * @arg @ref LL_RTC_WEEKDAY_WEDNESDAY + * @arg @ref LL_RTC_WEEKDAY_THURSDAY + * @arg @ref LL_RTC_WEEKDAY_FRIDAY + * @arg @ref LL_RTC_WEEKDAY_SATURDAY + * @arg @ref LL_RTC_WEEKDAY_SUNDAY + */ +__STATIC_INLINE uint32_t LL_RTC_ALMB_GetWeekDay(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->ALRMBR, RTC_ALRMBR_DU) >> RTC_POSITION_ALMB_DU); +} + +/** + * @brief Set ALARM B time format (AM/24-hour or PM notation) + * @rmtoll ALRMBR PM LL_RTC_ALMB_SetTimeFormat + * @param RTCx RTC Instance + * @param TimeFormat This parameter can be one of the following values: + * @arg @ref LL_RTC_ALMB_TIME_FORMAT_AM + * @arg @ref LL_RTC_ALMB_TIME_FORMAT_PM + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMB_SetTimeFormat(RTC_TypeDef *RTCx, uint32_t TimeFormat) +{ + MODIFY_REG(RTCx->ALRMBR, RTC_ALRMBR_PM, TimeFormat); +} + +/** + * @brief Get ALARM B time format (AM or PM notation) + * @rmtoll ALRMBR PM LL_RTC_ALMB_GetTimeFormat + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_ALMB_TIME_FORMAT_AM + * @arg @ref LL_RTC_ALMB_TIME_FORMAT_PM + */ +__STATIC_INLINE uint32_t LL_RTC_ALMB_GetTimeFormat(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->ALRMBR, RTC_ALRMBR_PM)); +} + +/** + * @brief Set ALARM B Hours in BCD format + * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert Hours from binary to BCD format + * @rmtoll ALRMBR HT LL_RTC_ALMB_SetHour\n + * ALRMBR HU LL_RTC_ALMB_SetHour + * @param RTCx RTC Instance + * @param Hours Value between Min_Data=0x01 and Max_Data=0x12 or between Min_Data=0x00 and Max_Data=0x23 + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMB_SetHour(RTC_TypeDef *RTCx, uint32_t Hours) +{ + MODIFY_REG(RTCx->ALRMBR, (RTC_ALRMBR_HT | RTC_ALRMBR_HU), + (((Hours & 0xF0U) << (RTC_POSITION_ALMB_HT - 4U)) | ((Hours & 0x0FU) << RTC_POSITION_ALMB_HU))); +} + +/** + * @brief Get ALARM B Hours in BCD format + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Hours from BCD to Binary format + * @rmtoll ALRMBR HT LL_RTC_ALMB_GetHour\n + * ALRMBR HU LL_RTC_ALMB_GetHour + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x01 and Max_Data=0x12 or between Min_Data=0x00 and Max_Data=0x23 + */ +__STATIC_INLINE uint32_t LL_RTC_ALMB_GetHour(RTC_TypeDef *RTCx) +{ + register uint32_t temp = 0U; + + temp = READ_BIT(RTCx->ALRMBR, (RTC_ALRMBR_HT | RTC_ALRMBR_HU)); + return (uint32_t)((((temp & RTC_ALRMBR_HT) >> RTC_POSITION_ALMB_HT) << 4U) | ((temp & RTC_ALRMBR_HU) >> RTC_POSITION_ALMB_HU)); +} + +/** + * @brief Set ALARM B Minutes in BCD format + * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert Minutes from binary to BCD format + * @rmtoll ALRMBR MNT LL_RTC_ALMB_SetMinute\n + * ALRMBR MNU LL_RTC_ALMB_SetMinute + * @param RTCx RTC Instance + * @param Minutes between Min_Data=0x00 and Max_Data=0x59 + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMB_SetMinute(RTC_TypeDef *RTCx, uint32_t Minutes) +{ + MODIFY_REG(RTCx->ALRMBR, (RTC_ALRMBR_MNT | RTC_ALRMBR_MNU), + (((Minutes & 0xF0U) << (RTC_POSITION_ALMB_MT - 4U)) | ((Minutes & 0x0FU) << RTC_POSITION_ALMB_MU))); +} + +/** + * @brief Get ALARM B Minutes in BCD format + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Minutes from BCD to Binary format + * @rmtoll ALRMBR MNT LL_RTC_ALMB_GetMinute\n + * ALRMBR MNU LL_RTC_ALMB_GetMinute + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x00 and Max_Data=0x59 + */ +__STATIC_INLINE uint32_t LL_RTC_ALMB_GetMinute(RTC_TypeDef *RTCx) +{ + register uint32_t temp = 0U; + + temp = READ_BIT(RTCx->ALRMBR, (RTC_ALRMBR_MNT | RTC_ALRMBR_MNU)); + return (uint32_t)((((temp & RTC_ALRMBR_MNT) >> RTC_POSITION_ALMB_MT) << 4U) | ((temp & RTC_ALRMBR_MNU) >> RTC_POSITION_ALMB_MU)); +} + +/** + * @brief Set ALARM B Seconds in BCD format + * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert Seconds from binary to BCD format + * @rmtoll ALRMBR ST LL_RTC_ALMB_SetSecond\n + * ALRMBR SU LL_RTC_ALMB_SetSecond + * @param RTCx RTC Instance + * @param Seconds Value between Min_Data=0x00 and Max_Data=0x59 + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMB_SetSecond(RTC_TypeDef *RTCx, uint32_t Seconds) +{ + MODIFY_REG(RTCx->ALRMBR, (RTC_ALRMBR_ST | RTC_ALRMBR_SU), + (((Seconds & 0xF0U) << (RTC_POSITION_ALMB_ST - 4U)) | ((Seconds & 0x0FU) << RTC_POSITION_ALMB_SU))); +} + +/** + * @brief Get ALARM B Seconds in BCD format + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Seconds from BCD to Binary format + * @rmtoll ALRMBR ST LL_RTC_ALMB_GetSecond\n + * ALRMBR SU LL_RTC_ALMB_GetSecond + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x00 and Max_Data=0x59 + */ +__STATIC_INLINE uint32_t LL_RTC_ALMB_GetSecond(RTC_TypeDef *RTCx) +{ + register uint32_t temp = 0U; + + temp = READ_BIT(RTCx->ALRMBR, (RTC_ALRMBR_ST | RTC_ALRMBR_SU)); + return (uint32_t)((((temp & RTC_ALRMBR_ST) >> RTC_POSITION_ALMB_ST) << 4U) | ((temp & RTC_ALRMBR_SU) >> RTC_POSITION_ALMB_SU)); +} + +/** + * @brief Set Alarm B Time (hour, minute and second) in BCD format + * @rmtoll ALRMBR PM LL_RTC_ALMB_ConfigTime\n + * ALRMBR HT LL_RTC_ALMB_ConfigTime\n + * ALRMBR HU LL_RTC_ALMB_ConfigTime\n + * ALRMBR MNT LL_RTC_ALMB_ConfigTime\n + * ALRMBR MNU LL_RTC_ALMB_ConfigTime\n + * ALRMBR ST LL_RTC_ALMB_ConfigTime\n + * ALRMBR SU LL_RTC_ALMB_ConfigTime + * @param RTCx RTC Instance + * @param Format12_24 This parameter can be one of the following values: + * @arg @ref LL_RTC_ALMB_TIME_FORMAT_AM + * @arg @ref LL_RTC_ALMB_TIME_FORMAT_PM + * @param Hours Value between Min_Data=0x01 and Max_Data=0x12 or between Min_Data=0x00 and Max_Data=0x23 + * @param Minutes Value between Min_Data=0x00 and Max_Data=0x59 + * @param Seconds Value between Min_Data=0x00 and Max_Data=0x59 + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMB_ConfigTime(RTC_TypeDef *RTCx, uint32_t Format12_24, uint32_t Hours, uint32_t Minutes, uint32_t Seconds) +{ + register uint32_t temp = 0U; + + temp = Format12_24 | (((Hours & 0xF0U) << (RTC_POSITION_ALMB_HT - 4U)) | ((Hours & 0x0FU) << RTC_POSITION_ALMB_HU)) | \ + (((Minutes & 0xF0U) << (RTC_POSITION_ALMB_MT - 4U)) | ((Minutes & 0x0FU) << RTC_POSITION_ALMB_MU)) | \ + (((Seconds & 0xF0U) << (RTC_POSITION_ALMB_ST - 4U)) | ((Seconds & 0x0FU) << RTC_POSITION_ALMB_SU)); + + MODIFY_REG(RTCx->ALRMBR, RTC_ALRMBR_PM| RTC_ALRMBR_HT | RTC_ALRMBR_HU | RTC_ALRMBR_MNT | RTC_ALRMBR_MNU | RTC_ALRMBR_ST | RTC_ALRMBR_SU, temp); +} + +/** + * @brief Get Alarm B Time (hour, minute and second) in BCD format + * @note helper macros __LL_RTC_GET_HOUR, __LL_RTC_GET_MINUTE and __LL_RTC_GET_SECOND + * are available to get independently each parameter. + * @rmtoll ALRMBR HT LL_RTC_ALMB_GetTime\n + * ALRMBR HU LL_RTC_ALMB_GetTime\n + * ALRMBR MNT LL_RTC_ALMB_GetTime\n + * ALRMBR MNU LL_RTC_ALMB_GetTime\n + * ALRMBR ST LL_RTC_ALMB_GetTime\n + * ALRMBR SU LL_RTC_ALMB_GetTime + * @param RTCx RTC Instance + * @retval Combination of hours, minutes and seconds. + */ +__STATIC_INLINE uint32_t LL_RTC_ALMB_GetTime(RTC_TypeDef *RTCx) +{ + return (uint32_t)((LL_RTC_ALMB_GetHour(RTCx) << RTC_OFFSET_HOUR) | (LL_RTC_ALMB_GetMinute(RTCx) << RTC_OFFSET_MINUTE) | LL_RTC_ALMB_GetSecond(RTCx)); +} + +#if defined(RTC_SUBSECOND_SUPPORT) +/** + * @brief Set Alarm B Mask the most-significant bits starting at this bit + * @note This register can be written only when ALRBE is reset in RTC_CR register, + * or in initialization mode. + * @rmtoll ALRMBSSR MASKSS LL_RTC_ALMB_SetSubSecondMask + * @param RTCx RTC Instance + * @param Mask Value between Min_Data=0x00 and Max_Data=0xF + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMB_SetSubSecondMask(RTC_TypeDef *RTCx, uint32_t Mask) +{ + MODIFY_REG(RTCx->ALRMBSSR, RTC_ALRMBSSR_MASKSS, Mask << RTC_POSITION_ALMB_MASKSS); +} + +/** + * @brief Get Alarm B Mask the most-significant bits starting at this bit + * @rmtoll ALRMBSSR MASKSS LL_RTC_ALMB_GetSubSecondMask + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x00 and Max_Data=0xF + */ +__STATIC_INLINE uint32_t LL_RTC_ALMB_GetSubSecondMask(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->ALRMBSSR, RTC_ALRMBSSR_MASKSS) >> RTC_POSITION_ALMB_MASKSS); +} + +/** + * @brief Set Alarm B Sub seconds value + * @rmtoll ALRMBSSR SS LL_RTC_ALMB_SetSubSecond + * @param RTCx RTC Instance + * @param Subsecond Value between Min_Data=0x00 and Max_Data=0x7FFF + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMB_SetSubSecond(RTC_TypeDef *RTCx, uint32_t Subsecond) +{ + MODIFY_REG(RTCx->ALRMBSSR, RTC_ALRMBSSR_SS, Subsecond); +} + +/** + * @brief Get Alarm B Sub seconds value + * @rmtoll ALRMBSSR SS LL_RTC_ALMB_GetSubSecond + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x00 and Max_Data=0x7FFF + */ +__STATIC_INLINE uint32_t LL_RTC_ALMB_GetSubSecond(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->ALRMBSSR, RTC_ALRMBSSR_SS)); +} +#endif /* RTC_SUBSECOND_SUPPORT */ + +/** + * @} + */ + +/** @defgroup RTC_LL_EF_Timestamp Timestamp + * @{ + */ + +/** + * @brief Enable Timestamp + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll CR TSE LL_RTC_TS_Enable + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_TS_Enable(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->CR, RTC_CR_TSE); +} + +/** + * @brief Disable Timestamp + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll CR TSE LL_RTC_TS_Disable + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_TS_Disable(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->CR, RTC_CR_TSE); +} + +/** + * @brief Set Time-stamp event active edge + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @note TSE must be reset when TSEDGE is changed to avoid unwanted TSF setting + * @rmtoll CR TSEDGE LL_RTC_TS_SetActiveEdge + * @param RTCx RTC Instance + * @param Edge This parameter can be one of the following values: + * @arg @ref LL_RTC_TIMESTAMP_EDGE_RISING + * @arg @ref LL_RTC_TIMESTAMP_EDGE_FALLING + * @retval None + */ +__STATIC_INLINE void LL_RTC_TS_SetActiveEdge(RTC_TypeDef *RTCx, uint32_t Edge) +{ + MODIFY_REG(RTCx->CR, RTC_CR_TSEDGE, Edge); +} + +/** + * @brief Get Time-stamp event active edge + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll CR TSEDGE LL_RTC_TS_GetActiveEdge + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_TIMESTAMP_EDGE_RISING + * @arg @ref LL_RTC_TIMESTAMP_EDGE_FALLING + */ +__STATIC_INLINE uint32_t LL_RTC_TS_GetActiveEdge(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->CR, RTC_CR_TSEDGE)); +} + +/** + * @brief Get Timestamp AM/PM notation (AM or 24-hour format) + * @rmtoll TSTR PM LL_RTC_TS_GetTimeFormat + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_TS_TIME_FORMAT_AM + * @arg @ref LL_RTC_TS_TIME_FORMAT_PM + */ +__STATIC_INLINE uint32_t LL_RTC_TS_GetTimeFormat(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->TSTR, RTC_TSTR_PM)); +} + +/** + * @brief Get Timestamp Hours in BCD format + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Hours from BCD to Binary format + * @rmtoll TSTR HT LL_RTC_TS_GetHour\n + * TSTR HU LL_RTC_TS_GetHour + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x01 and Max_Data=0x12 or between Min_Data=0x00 and Max_Data=0x23 + */ +__STATIC_INLINE uint32_t LL_RTC_TS_GetHour(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->TSTR, RTC_TSTR_HT | RTC_TSTR_HU) >> RTC_POSITION_TS_HU); +} + +/** + * @brief Get Timestamp Minutes in BCD format + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Minutes from BCD to Binary format + * @rmtoll TSTR MNT LL_RTC_TS_GetMinute\n + * TSTR MNU LL_RTC_TS_GetMinute + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x00 and Max_Data=0x59 + */ +__STATIC_INLINE uint32_t LL_RTC_TS_GetMinute(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->TSTR, RTC_TSTR_MNT | RTC_TSTR_MNU) >> RTC_POSITION_TS_MNU); +} + +/** + * @brief Get Timestamp Seconds in BCD format + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Seconds from BCD to Binary format + * @rmtoll TSTR ST LL_RTC_TS_GetSecond\n + * TSTR SU LL_RTC_TS_GetSecond + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x00 and Max_Data=0x59 + */ +__STATIC_INLINE uint32_t LL_RTC_TS_GetSecond(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->TSTR, RTC_TSTR_ST | RTC_TSTR_SU)); +} + +/** + * @brief Get Timestamp time (hour, minute and second) in BCD format + * @note helper macros __LL_RTC_GET_HOUR, __LL_RTC_GET_MINUTE and __LL_RTC_GET_SECOND + * are available to get independently each parameter. + * @rmtoll TSTR HT LL_RTC_TS_GetTime\n + * TSTR HU LL_RTC_TS_GetTime\n + * TSTR MNT LL_RTC_TS_GetTime\n + * TSTR MNU LL_RTC_TS_GetTime\n + * TSTR ST LL_RTC_TS_GetTime\n + * TSTR SU LL_RTC_TS_GetTime + * @param RTCx RTC Instance + * @retval Combination of hours, minutes and seconds. + */ +__STATIC_INLINE uint32_t LL_RTC_TS_GetTime(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->TSTR, + RTC_TSTR_HT | RTC_TSTR_HU | RTC_TSTR_MNT | RTC_TSTR_MNU | RTC_TSTR_ST | RTC_TSTR_SU)); +} + +/** + * @brief Get Timestamp Week day + * @rmtoll TSDR WDU LL_RTC_TS_GetWeekDay + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_WEEKDAY_MONDAY + * @arg @ref LL_RTC_WEEKDAY_TUESDAY + * @arg @ref LL_RTC_WEEKDAY_WEDNESDAY + * @arg @ref LL_RTC_WEEKDAY_THURSDAY + * @arg @ref LL_RTC_WEEKDAY_FRIDAY + * @arg @ref LL_RTC_WEEKDAY_SATURDAY + * @arg @ref LL_RTC_WEEKDAY_SUNDAY + */ +__STATIC_INLINE uint32_t LL_RTC_TS_GetWeekDay(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->TSDR, RTC_TSDR_WDU) >> RTC_POSITION_TS_WDU); +} + +/** + * @brief Get Timestamp Month in BCD format + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Month from BCD to Binary format + * @rmtoll TSDR MT LL_RTC_TS_GetMonth\n + * TSDR MU LL_RTC_TS_GetMonth + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_MONTH_JANUARY + * @arg @ref LL_RTC_MONTH_FEBRUARY + * @arg @ref LL_RTC_MONTH_MARCH + * @arg @ref LL_RTC_MONTH_APRIL + * @arg @ref LL_RTC_MONTH_MAY + * @arg @ref LL_RTC_MONTH_JUNE + * @arg @ref LL_RTC_MONTH_JULY + * @arg @ref LL_RTC_MONTH_AUGUST + * @arg @ref LL_RTC_MONTH_SEPTEMBER + * @arg @ref LL_RTC_MONTH_OCTOBER + * @arg @ref LL_RTC_MONTH_NOVEMBER + * @arg @ref LL_RTC_MONTH_DECEMBER + */ +__STATIC_INLINE uint32_t LL_RTC_TS_GetMonth(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->TSDR, RTC_TSDR_MT | RTC_TSDR_MU) >> RTC_POSITION_TS_MU); +} + +/** + * @brief Get Timestamp Day in BCD format + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Day from BCD to Binary format + * @rmtoll TSDR DT LL_RTC_TS_GetDay\n + * TSDR DU LL_RTC_TS_GetDay + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x01 and Max_Data=0x31 + */ +__STATIC_INLINE uint32_t LL_RTC_TS_GetDay(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->TSDR, RTC_TSDR_DT | RTC_TSDR_DU)); +} + +/** + * @brief Get Timestamp date (WeekDay, Day and Month) in BCD format + * @note helper macros __LL_RTC_GET_WEEKDAY, __LL_RTC_GET_MONTH, + * and __LL_RTC_GET_DAY are available to get independently each parameter. + * @rmtoll TSDR WDU LL_RTC_TS_GetDate\n + * TSDR MT LL_RTC_TS_GetDate\n + * TSDR MU LL_RTC_TS_GetDate\n + * TSDR DT LL_RTC_TS_GetDate\n + * TSDR DU LL_RTC_TS_GetDate + * @param RTCx RTC Instance + * @retval Combination of Weekday, Day and Month + */ +__STATIC_INLINE uint32_t LL_RTC_TS_GetDate(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->TSDR, RTC_TSDR_WDU | RTC_TSDR_MT | RTC_TSDR_MU | RTC_TSDR_DT | RTC_TSDR_DU)); +} + +#if defined(RTC_SUBSECOND_SUPPORT) +/** + * @brief Get time-stamp sub second value + * @rmtoll TSSSR SS LL_RTC_TS_GetSubSecond + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x00 and Max_Data=0xFFFF + */ +__STATIC_INLINE uint32_t LL_RTC_TS_GetSubSecond(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->TSSSR, RTC_TSSSR_SS)); +} +#endif /* RTC_SUBSECOND_SUPPORT */ + +#if defined(RTC_TAFCR_TAMPTS) +/** + * @brief Activate timestamp on tamper detection event + * @rmtoll TAFCR TAMPTS LL_RTC_TS_EnableOnTamper + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_TS_EnableOnTamper(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->TAFCR, RTC_TAFCR_TAMPTS); +} + +/** + * @brief Disable timestamp on tamper detection event + * @rmtoll TAFCR TAMPTS LL_RTC_TS_DisableOnTamper + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_TS_DisableOnTamper(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->TAFCR, RTC_TAFCR_TAMPTS); +} +#endif /* RTC_TAFCR_TAMPTS */ + +/** + * @} + */ + +/** @defgroup RTC_LL_EF_Tamper Tamper + * @{ + */ + +/** + * @brief Enable RTC_TAMPx input detection + * @rmtoll TAFCR TAMP1E LL_RTC_TAMPER_Enable\n + * TAFCR TAMP2E LL_RTC_TAMPER_Enable\n + * TAFCR TAMP3E LL_RTC_TAMPER_Enable + * @param RTCx RTC Instance + * @param Tamper This parameter can be a combination of the following values: + * @arg @ref LL_RTC_TAMPER_1 + * @arg @ref LL_RTC_TAMPER_2 (*) + * @arg @ref LL_RTC_TAMPER_3 (*) + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_RTC_TAMPER_Enable(RTC_TypeDef *RTCx, uint32_t Tamper) +{ + SET_BIT(RTCx->TAFCR, Tamper); +} + +/** + * @brief Clear RTC_TAMPx input detection + * @rmtoll TAFCR TAMP1E LL_RTC_TAMPER_Disable\n + * TAFCR TAMP2E LL_RTC_TAMPER_Disable\n + * TAFCR TAMP3E LL_RTC_TAMPER_Disable + * @param RTCx RTC Instance + * @param Tamper This parameter can be a combination of the following values: + * @arg @ref LL_RTC_TAMPER_1 + * @arg @ref LL_RTC_TAMPER_2 (*) + * @arg @ref LL_RTC_TAMPER_3 (*) + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_RTC_TAMPER_Disable(RTC_TypeDef *RTCx, uint32_t Tamper) +{ + CLEAR_BIT(RTCx->TAFCR, Tamper); +} + +#if defined(RTC_TAFCR_TAMPPUDIS) +/** + * @brief Disable RTC_TAMPx pull-up disable (Disable precharge of RTC_TAMPx pins) + * @rmtoll TAFCR TAMPPUDIS LL_RTC_TAMPER_DisablePullUp + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_TAMPER_DisablePullUp(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->TAFCR, RTC_TAFCR_TAMPPUDIS); +} + +/** + * @brief Enable RTC_TAMPx pull-up disable ( Precharge RTC_TAMPx pins before sampling) + * @rmtoll TAFCR TAMPPUDIS LL_RTC_TAMPER_EnablePullUp + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_TAMPER_EnablePullUp(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->TAFCR, RTC_TAFCR_TAMPPUDIS); +} +#endif /* RTC_TAFCR_TAMPPUDIS */ + +#if defined(RTC_TAFCR_TAMPPRCH) +/** + * @brief Set RTC_TAMPx precharge duration + * @rmtoll TAFCR TAMPPRCH LL_RTC_TAMPER_SetPrecharge + * @param RTCx RTC Instance + * @param Duration This parameter can be one of the following values: + * @arg @ref LL_RTC_TAMPER_DURATION_1RTCCLK + * @arg @ref LL_RTC_TAMPER_DURATION_2RTCCLK + * @arg @ref LL_RTC_TAMPER_DURATION_4RTCCLK + * @arg @ref LL_RTC_TAMPER_DURATION_8RTCCLK + * @retval None + */ +__STATIC_INLINE void LL_RTC_TAMPER_SetPrecharge(RTC_TypeDef *RTCx, uint32_t Duration) +{ + MODIFY_REG(RTCx->TAFCR, RTC_TAFCR_TAMPPRCH, Duration); +} + +/** + * @brief Get RTC_TAMPx precharge duration + * @rmtoll TAFCR TAMPPRCH LL_RTC_TAMPER_GetPrecharge + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_TAMPER_DURATION_1RTCCLK + * @arg @ref LL_RTC_TAMPER_DURATION_2RTCCLK + * @arg @ref LL_RTC_TAMPER_DURATION_4RTCCLK + * @arg @ref LL_RTC_TAMPER_DURATION_8RTCCLK + */ +__STATIC_INLINE uint32_t LL_RTC_TAMPER_GetPrecharge(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->TAFCR, RTC_TAFCR_TAMPPRCH)); +} +#endif /* RTC_TAFCR_TAMPPRCH */ + +#if defined(RTC_TAFCR_TAMPFLT) +/** + * @brief Set RTC_TAMPx filter count + * @rmtoll TAFCR TAMPFLT LL_RTC_TAMPER_SetFilterCount + * @param RTCx RTC Instance + * @param FilterCount This parameter can be one of the following values: + * @arg @ref LL_RTC_TAMPER_FILTER_DISABLE + * @arg @ref LL_RTC_TAMPER_FILTER_2SAMPLE + * @arg @ref LL_RTC_TAMPER_FILTER_4SAMPLE + * @arg @ref LL_RTC_TAMPER_FILTER_8SAMPLE + * @retval None + */ +__STATIC_INLINE void LL_RTC_TAMPER_SetFilterCount(RTC_TypeDef *RTCx, uint32_t FilterCount) +{ + MODIFY_REG(RTCx->TAFCR, RTC_TAFCR_TAMPFLT, FilterCount); +} + +/** + * @brief Get RTC_TAMPx filter count + * @rmtoll TAFCR TAMPFLT LL_RTC_TAMPER_GetFilterCount + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_TAMPER_FILTER_DISABLE + * @arg @ref LL_RTC_TAMPER_FILTER_2SAMPLE + * @arg @ref LL_RTC_TAMPER_FILTER_4SAMPLE + * @arg @ref LL_RTC_TAMPER_FILTER_8SAMPLE + */ +__STATIC_INLINE uint32_t LL_RTC_TAMPER_GetFilterCount(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->TAFCR, RTC_TAFCR_TAMPFLT)); +} +#endif /* RTC_TAFCR_TAMPFLT */ + +#if defined(RTC_TAFCR_TAMPFREQ) +/** + * @brief Set Tamper sampling frequency + * @rmtoll TAFCR TAMPFREQ LL_RTC_TAMPER_SetSamplingFreq + * @param RTCx RTC Instance + * @param SamplingFreq This parameter can be one of the following values: + * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_32768 + * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_16384 + * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_8192 + * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_4096 + * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_2048 + * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_1024 + * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_512 + * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_256 + * @retval None + */ +__STATIC_INLINE void LL_RTC_TAMPER_SetSamplingFreq(RTC_TypeDef *RTCx, uint32_t SamplingFreq) +{ + MODIFY_REG(RTCx->TAFCR, RTC_TAFCR_TAMPFREQ, SamplingFreq); +} + +/** + * @brief Get Tamper sampling frequency + * @rmtoll TAFCR TAMPFREQ LL_RTC_TAMPER_GetSamplingFreq + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_32768 + * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_16384 + * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_8192 + * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_4096 + * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_2048 + * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_1024 + * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_512 + * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_256 + */ +__STATIC_INLINE uint32_t LL_RTC_TAMPER_GetSamplingFreq(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->TAFCR, RTC_TAFCR_TAMPFREQ)); +} +#endif /* RTC_TAFCR_TAMPFREQ */ + +/** + * @brief Enable Active level for Tamper input + * @rmtoll TAFCR TAMP1TRG LL_RTC_TAMPER_EnableActiveLevel\n + * TAFCR TAMP2TRG LL_RTC_TAMPER_EnableActiveLevel\n + * TAFCR TAMP3TRG LL_RTC_TAMPER_EnableActiveLevel + * @param RTCx RTC Instance + * @param Tamper This parameter can be a combination of the following values: + * @arg @ref LL_RTC_TAMPER_ACTIVELEVEL_TAMP1 + * @arg @ref LL_RTC_TAMPER_ACTIVELEVEL_TAMP2 (*) + * @arg @ref LL_RTC_TAMPER_ACTIVELEVEL_TAMP3 (*) + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_RTC_TAMPER_EnableActiveLevel(RTC_TypeDef *RTCx, uint32_t Tamper) +{ + SET_BIT(RTCx->TAFCR, Tamper); +} + +/** + * @brief Disable Active level for Tamper input + * @rmtoll TAFCR TAMP1TRG LL_RTC_TAMPER_DisableActiveLevel\n + * TAFCR TAMP2TRG LL_RTC_TAMPER_DisableActiveLevel\n + * TAFCR TAMP3TRG LL_RTC_TAMPER_DisableActiveLevel + * @param RTCx RTC Instance + * @param Tamper This parameter can be a combination of the following values: + * @arg @ref LL_RTC_TAMPER_ACTIVELEVEL_TAMP1 + * @arg @ref LL_RTC_TAMPER_ACTIVELEVEL_TAMP2 (*) + * @arg @ref LL_RTC_TAMPER_ACTIVELEVEL_TAMP3 (*) + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_RTC_TAMPER_DisableActiveLevel(RTC_TypeDef *RTCx, uint32_t Tamper) +{ + CLEAR_BIT(RTCx->TAFCR, Tamper); +} + +/** + * @} + */ + +#if defined(RTC_WAKEUP_SUPPORT) +/** @defgroup RTC_LL_EF_Wakeup Wakeup + * @{ + */ + +/** + * @brief Enable Wakeup timer + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll CR WUTE LL_RTC_WAKEUP_Enable + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_WAKEUP_Enable(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->CR, RTC_CR_WUTE); +} + +/** + * @brief Disable Wakeup timer + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll CR WUTE LL_RTC_WAKEUP_Disable + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_WAKEUP_Disable(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->CR, RTC_CR_WUTE); +} + +/** + * @brief Check if Wakeup timer is enabled or not + * @rmtoll CR WUTE LL_RTC_WAKEUP_IsEnabled + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_WAKEUP_IsEnabled(RTC_TypeDef *RTCx) +{ + return (READ_BIT(RTCx->CR, RTC_CR_WUTE) == (RTC_CR_WUTE)); +} + +/** + * @brief Select Wakeup clock + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @note Bit can be written only when RTC_CR WUTE bit = 0 and RTC_ISR WUTWF bit = 1 + * @rmtoll CR WUCKSEL LL_RTC_WAKEUP_SetClock + * @param RTCx RTC Instance + * @param WakeupClock This parameter can be one of the following values: + * @arg @ref LL_RTC_WAKEUPCLOCK_DIV_16 + * @arg @ref LL_RTC_WAKEUPCLOCK_DIV_8 + * @arg @ref LL_RTC_WAKEUPCLOCK_DIV_4 + * @arg @ref LL_RTC_WAKEUPCLOCK_DIV_2 + * @arg @ref LL_RTC_WAKEUPCLOCK_CKSPRE + * @arg @ref LL_RTC_WAKEUPCLOCK_CKSPRE_WUT + * @retval None + */ +__STATIC_INLINE void LL_RTC_WAKEUP_SetClock(RTC_TypeDef *RTCx, uint32_t WakeupClock) +{ + MODIFY_REG(RTCx->CR, RTC_CR_WUCKSEL, WakeupClock); +} + +/** + * @brief Get Wakeup clock + * @rmtoll CR WUCKSEL LL_RTC_WAKEUP_GetClock + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_WAKEUPCLOCK_DIV_16 + * @arg @ref LL_RTC_WAKEUPCLOCK_DIV_8 + * @arg @ref LL_RTC_WAKEUPCLOCK_DIV_4 + * @arg @ref LL_RTC_WAKEUPCLOCK_DIV_2 + * @arg @ref LL_RTC_WAKEUPCLOCK_CKSPRE + * @arg @ref LL_RTC_WAKEUPCLOCK_CKSPRE_WUT + */ +__STATIC_INLINE uint32_t LL_RTC_WAKEUP_GetClock(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->CR, RTC_CR_WUCKSEL)); +} + +/** + * @brief Set Wakeup auto-reload value + * @note Bit can be written only when WUTWF is set to 1 in RTC_ISR + * @rmtoll WUTR WUT LL_RTC_WAKEUP_SetAutoReload + * @param RTCx RTC Instance + * @param Value Value between Min_Data=0x00 and Max_Data=0xFFFF + * @retval None + */ +__STATIC_INLINE void LL_RTC_WAKEUP_SetAutoReload(RTC_TypeDef *RTCx, uint32_t Value) +{ + MODIFY_REG(RTCx->WUTR, RTC_WUTR_WUT, Value); +} + +/** + * @brief Get Wakeup auto-reload value + * @rmtoll WUTR WUT LL_RTC_WAKEUP_GetAutoReload + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x00 and Max_Data=0xFFFF + */ +__STATIC_INLINE uint32_t LL_RTC_WAKEUP_GetAutoReload(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->WUTR, RTC_WUTR_WUT)); +} + +/** + * @} + */ +#endif /* RTC_WAKEUP_SUPPORT */ + +#if defined(RTC_BACKUP_SUPPORT) +/** @defgroup RTC_LL_EF_Backup_Registers Backup_Registers + * @{ + */ + +/** + * @brief Writes a data in a specified RTC Backup data register. + * @rmtoll BKPxR BKP LL_RTC_BAK_SetRegister + * @param RTCx RTC Instance + * @param BackupRegister This parameter can be one of the following values: + * @arg @ref LL_RTC_BKP_DR0 + * @arg @ref LL_RTC_BKP_DR1 + * @arg @ref LL_RTC_BKP_DR2 + * @arg @ref LL_RTC_BKP_DR3 + * @arg @ref LL_RTC_BKP_DR4 + * @arg @ref LL_RTC_BKP_DR5 (*) + * @arg @ref LL_RTC_BKP_DR6 (*) + * @arg @ref LL_RTC_BKP_DR7 (*) + * @arg @ref LL_RTC_BKP_DR8 (*) + * @arg @ref LL_RTC_BKP_DR9 (*) + * @arg @ref LL_RTC_BKP_DR10 (*) + * @arg @ref LL_RTC_BKP_DR11 (*) + * @arg @ref LL_RTC_BKP_DR12 (*) + * @arg @ref LL_RTC_BKP_DR13 (*) + * @arg @ref LL_RTC_BKP_DR14 (*) + * @arg @ref LL_RTC_BKP_DR15 (*) + * @arg @ref LL_RTC_BKP_DR16 (*) + * @arg @ref LL_RTC_BKP_DR17 (*) + * @arg @ref LL_RTC_BKP_DR18 (*) + * @arg @ref LL_RTC_BKP_DR19 (*) + * @arg @ref LL_RTC_BKP_DR20 (*) + * @arg @ref LL_RTC_BKP_DR21 (*) + * @arg @ref LL_RTC_BKP_DR22 (*) + * @arg @ref LL_RTC_BKP_DR23 (*) + * @arg @ref LL_RTC_BKP_DR24 (*) + * @arg @ref LL_RTC_BKP_DR25 (*) + * @arg @ref LL_RTC_BKP_DR26 (*) + * @arg @ref LL_RTC_BKP_DR27 (*) + * @arg @ref LL_RTC_BKP_DR28 (*) + * @arg @ref LL_RTC_BKP_DR29 (*) + * @arg @ref LL_RTC_BKP_DR30 (*) + * @arg @ref LL_RTC_BKP_DR31 (*) + * + * (*) value not defined in all devices. + * @param Data Value between Min_Data=0x00 and Max_Data=0xFFFFFFFF + * @retval None + */ +__STATIC_INLINE void LL_RTC_BAK_SetRegister(RTC_TypeDef *RTCx, uint32_t BackupRegister, uint32_t Data) +{ + register uint32_t tmp = 0U; + + tmp = (uint32_t)(&(RTCx->BKP0R)); + tmp += (BackupRegister * 4U); + + /* Write the specified register */ + *(__IO uint32_t *)tmp = (uint32_t)Data; +} + +/** + * @brief Reads data from the specified RTC Backup data Register. + * @rmtoll BKPxR BKP LL_RTC_BAK_GetRegister + * @param RTCx RTC Instance + * @param BackupRegister This parameter can be one of the following values: + * @arg @ref LL_RTC_BKP_DR0 + * @arg @ref LL_RTC_BKP_DR1 + * @arg @ref LL_RTC_BKP_DR2 + * @arg @ref LL_RTC_BKP_DR3 + * @arg @ref LL_RTC_BKP_DR4 + * @arg @ref LL_RTC_BKP_DR5 (*) + * @arg @ref LL_RTC_BKP_DR6 (*) + * @arg @ref LL_RTC_BKP_DR7 (*) + * @arg @ref LL_RTC_BKP_DR8 (*) + * @arg @ref LL_RTC_BKP_DR9 (*) + * @arg @ref LL_RTC_BKP_DR10 (*) + * @arg @ref LL_RTC_BKP_DR11 (*) + * @arg @ref LL_RTC_BKP_DR12 (*) + * @arg @ref LL_RTC_BKP_DR13 (*) + * @arg @ref LL_RTC_BKP_DR14 (*) + * @arg @ref LL_RTC_BKP_DR15 (*) + * @arg @ref LL_RTC_BKP_DR16 (*) + * @arg @ref LL_RTC_BKP_DR17 (*) + * @arg @ref LL_RTC_BKP_DR18 (*) + * @arg @ref LL_RTC_BKP_DR19 (*) + * @arg @ref LL_RTC_BKP_DR20 (*) + * @arg @ref LL_RTC_BKP_DR21 (*) + * @arg @ref LL_RTC_BKP_DR22 (*) + * @arg @ref LL_RTC_BKP_DR23 (*) + * @arg @ref LL_RTC_BKP_DR24 (*) + * @arg @ref LL_RTC_BKP_DR25 (*) + * @arg @ref LL_RTC_BKP_DR26 (*) + * @arg @ref LL_RTC_BKP_DR27 (*) + * @arg @ref LL_RTC_BKP_DR28 (*) + * @arg @ref LL_RTC_BKP_DR29 (*) + * @arg @ref LL_RTC_BKP_DR30 (*) + * @arg @ref LL_RTC_BKP_DR31 (*) + * + * (*) value not defined in all devices. + * @retval Value between Min_Data=0x00 and Max_Data=0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_RTC_BAK_GetRegister(RTC_TypeDef *RTCx, uint32_t BackupRegister) +{ + register uint32_t tmp = 0U; + + tmp = (uint32_t)(&(RTCx->BKP0R)); + tmp += (BackupRegister * 4U); + + /* Read the specified register */ + return (*(__IO uint32_t *)tmp); +} + +/** + * @} + */ +#endif /* RTC_BACKUP_SUPPORT */ + +/** @defgroup RTC_LL_EF_Calibration Calibration + * @{ + */ + +/** + * @brief Set Calibration output frequency (1 Hz or 512 Hz) + * @note Bits are write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll CR COE LL_RTC_CAL_SetOutputFreq\n + * CR COSEL LL_RTC_CAL_SetOutputFreq + * @param RTCx RTC Instance + * @param Frequency This parameter can be one of the following values: + * @arg @ref LL_RTC_CALIB_OUTPUT_NONE + * @arg @ref LL_RTC_CALIB_OUTPUT_1HZ (*) + * @arg @ref LL_RTC_CALIB_OUTPUT_512HZ + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_RTC_CAL_SetOutputFreq(RTC_TypeDef *RTCx, uint32_t Frequency) +{ +#if defined(RTC_CR_COSEL) + MODIFY_REG(RTCx->CR, RTC_CR_COE | RTC_CR_COSEL, Frequency); +#else + MODIFY_REG(RTCx->CR, RTC_CR_COE, Frequency); +#endif /* RTC_CR_COSEL */ +} + +/** + * @brief Get Calibration output frequency (1 Hz or 512 Hz) + * @rmtoll CR COE LL_RTC_CAL_GetOutputFreq\n + * CR COSEL LL_RTC_CAL_GetOutputFreq + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_CALIB_OUTPUT_NONE + * @arg @ref LL_RTC_CALIB_OUTPUT_1HZ (*) + * @arg @ref LL_RTC_CALIB_OUTPUT_512HZ + * + * (*) value not defined in all devices. + */ +__STATIC_INLINE uint32_t LL_RTC_CAL_GetOutputFreq(RTC_TypeDef *RTCx) +{ +#if defined(RTC_CR_COSEL) + return (uint32_t)(READ_BIT(RTCx->CR, RTC_CR_COE | RTC_CR_COSEL)); +#else + return (uint32_t)(READ_BIT(RTCx->CR, RTC_CR_COE)); +#endif /* RTC_CR_COSEL */ +} + +/** + * @brief Enable Coarse digital calibration + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @note It can be written in initialization mode only (@ref LL_RTC_EnableInitMode function) + * @rmtoll CR DCE LL_RTC_CAL_EnableCoarseDigital + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_CAL_EnableCoarseDigital(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->CR, RTC_CR_DCE); +} + +/** + * @brief Disable Coarse digital calibration + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @note It can be written in initialization mode only (@ref LL_RTC_EnableInitMode function) + * @rmtoll CR DCE LL_RTC_CAL_DisableCoarseDigital + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_CAL_DisableCoarseDigital(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->CR, RTC_CR_DCE); +} + +/** + * @brief Set the coarse digital calibration + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @note It can be written in initialization mode only (@ref LL_RTC_EnableInitMode function) + * @rmtoll CALIBR DCS LL_RTC_CAL_ConfigCoarseDigital\n + * CALIBR DC LL_RTC_CAL_ConfigCoarseDigital + * @param RTCx RTC Instance + * @param Sign This parameter can be one of the following values: + * @arg @ref LL_RTC_CALIB_SIGN_POSITIVE + * @arg @ref LL_RTC_CALIB_SIGN_NEGATIVE + * @param Value value of coarse calibration expressed in ppm (coded on 5 bits) + * @note This Calibration value should be between 0 and 63 when using negative sign with a 2-ppm step. + * @note This Calibration value should be between 0 and 126 when using positive sign with a 4-ppm step. + * @retval None + */ +__STATIC_INLINE void LL_RTC_CAL_ConfigCoarseDigital(RTC_TypeDef* RTCx, uint32_t Sign, uint32_t Value) +{ + MODIFY_REG(RTCx->CALIBR, RTC_CALIBR_DCS | RTC_CALIBR_DC, Sign | Value); +} + +/** + * @brief Get the coarse digital calibration value + * @rmtoll CALIBR DC LL_RTC_CAL_GetCoarseDigitalValue + * @param RTCx RTC Instance + * @retval value of coarse calibration expressed in ppm (coded on 5 bits) + */ +__STATIC_INLINE uint32_t LL_RTC_CAL_GetCoarseDigitalValue(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->CALIBR, RTC_CALIBR_DC)); +} + +/** + * @brief Get the coarse digital calibration sign + * @rmtoll CALIBR DCS LL_RTC_CAL_GetCoarseDigitalSign + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_CALIB_SIGN_POSITIVE + * @arg @ref LL_RTC_CALIB_SIGN_NEGATIVE + */ +__STATIC_INLINE uint32_t LL_RTC_CAL_GetCoarseDigitalSign(RTC_TypeDef* RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->CALIBR, RTC_CALIBR_DCS)); +} + +#if defined(RTC_SMOOTHCALIB_SUPPORT) +/** + * @brief Insert or not One RTCCLK pulse every 2exp11 pulses (frequency increased by 488.5 ppm) + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @note Bit can be written only when RECALPF is set to 0 in RTC_ISR + * @rmtoll CALR CALP LL_RTC_CAL_SetPulse + * @param RTCx RTC Instance + * @param Pulse This parameter can be one of the following values: + * @arg @ref LL_RTC_CALIB_INSERTPULSE_NONE + * @arg @ref LL_RTC_CALIB_INSERTPULSE_SET + * @retval None + */ +__STATIC_INLINE void LL_RTC_CAL_SetPulse(RTC_TypeDef *RTCx, uint32_t Pulse) +{ + MODIFY_REG(RTCx->CALR, RTC_CALR_CALP, Pulse); +} + +/** + * @brief Check if one RTCCLK has been inserted or not every 2exp11 pulses (frequency increased by 488.5 ppm) + * @rmtoll CALR CALP LL_RTC_CAL_IsPulseInserted + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_CAL_IsPulseInserted(RTC_TypeDef *RTCx) +{ + return (READ_BIT(RTCx->CALR, RTC_CALR_CALP) == (RTC_CALR_CALP)); +} + +/** + * @brief Set the calibration cycle period + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @note Bit can be written only when RECALPF is set to 0 in RTC_ISR + * @rmtoll CALR CALW8 LL_RTC_CAL_SetPeriod\n + * CALR CALW16 LL_RTC_CAL_SetPeriod + * @param RTCx RTC Instance + * @param Period This parameter can be one of the following values: + * @arg @ref LL_RTC_CALIB_PERIOD_32SEC + * @arg @ref LL_RTC_CALIB_PERIOD_16SEC + * @arg @ref LL_RTC_CALIB_PERIOD_8SEC + * @retval None + */ +__STATIC_INLINE void LL_RTC_CAL_SetPeriod(RTC_TypeDef *RTCx, uint32_t Period) +{ + MODIFY_REG(RTCx->CALR, RTC_CALR_CALW8 | RTC_CALR_CALW16, Period); +} + +/** + * @brief Get the calibration cycle period + * @rmtoll CALR CALW8 LL_RTC_CAL_GetPeriod\n + * CALR CALW16 LL_RTC_CAL_GetPeriod + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_CALIB_PERIOD_32SEC + * @arg @ref LL_RTC_CALIB_PERIOD_16SEC + * @arg @ref LL_RTC_CALIB_PERIOD_8SEC + */ +__STATIC_INLINE uint32_t LL_RTC_CAL_GetPeriod(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->CALR, RTC_CALR_CALW8 | RTC_CALR_CALW16)); +} + +/** + * @brief Set Calibration minus + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @note Bit can be written only when RECALPF is set to 0 in RTC_ISR + * @rmtoll CALR CALM LL_RTC_CAL_SetMinus + * @param RTCx RTC Instance + * @param CalibMinus Value between Min_Data=0x00 and Max_Data=0x1FF + * @retval None + */ +__STATIC_INLINE void LL_RTC_CAL_SetMinus(RTC_TypeDef *RTCx, uint32_t CalibMinus) +{ + MODIFY_REG(RTCx->CALR, RTC_CALR_CALM, CalibMinus); +} + +/** + * @brief Get Calibration minus + * @rmtoll CALR CALM LL_RTC_CAL_GetMinus + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x00 and Max_Data= 0x1FF + */ +__STATIC_INLINE uint32_t LL_RTC_CAL_GetMinus(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->CALR, RTC_CALR_CALM)); +} +#endif /* RTC_SMOOTHCALIB_SUPPORT */ + +/** + * @} + */ + +/** @defgroup RTC_LL_EF_FLAG_Management FLAG_Management + * @{ + */ + +#if defined(RTC_SMOOTHCALIB_SUPPORT) +/** + * @brief Get Recalibration pending Flag + * @rmtoll ISR RECALPF LL_RTC_IsActiveFlag_RECALP + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_RECALP(RTC_TypeDef *RTCx) +{ + return (READ_BIT(RTCx->ISR, RTC_ISR_RECALPF) == (RTC_ISR_RECALPF)); +} +#endif /* RTC_SMOOTHCALIB_SUPPORT */ + +#if defined(RTC_TAMPER3_SUPPORT) +/** + * @brief Get RTC_TAMP3 detection flag + * @rmtoll ISR TAMP3F LL_RTC_IsActiveFlag_TAMP3 + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_TAMP3(RTC_TypeDef *RTCx) +{ + return (READ_BIT(RTCx->ISR, RTC_ISR_TAMP3F) == (RTC_ISR_TAMP3F)); +} +#endif /* RTC_TAMPER3_SUPPORT */ + +#if defined(RTC_TAMPER2_SUPPORT) +/** + * @brief Get RTC_TAMP2 detection flag + * @rmtoll ISR TAMP2F LL_RTC_IsActiveFlag_TAMP2 + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_TAMP2(RTC_TypeDef *RTCx) +{ + return (READ_BIT(RTCx->ISR, RTC_ISR_TAMP2F) == (RTC_ISR_TAMP2F)); +} +#endif /* RTC_TAMPER2_SUPPORT */ + +#if defined(RTC_TAMPER1_SUPPORT) +/** + * @brief Get RTC_TAMP1 detection flag + * @rmtoll ISR TAMP1F LL_RTC_IsActiveFlag_TAMP1 + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_TAMP1(RTC_TypeDef *RTCx) +{ + return (READ_BIT(RTCx->ISR, RTC_ISR_TAMP1F) == (RTC_ISR_TAMP1F)); +} +#endif /* RTC_TAMPER1_SUPPORT */ + +/** + * @brief Get Time-stamp overflow flag + * @rmtoll ISR TSOVF LL_RTC_IsActiveFlag_TSOV + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_TSOV(RTC_TypeDef *RTCx) +{ + return (READ_BIT(RTCx->ISR, RTC_ISR_TSOVF) == (RTC_ISR_TSOVF)); +} + +/** + * @brief Get Time-stamp flag + * @rmtoll ISR TSF LL_RTC_IsActiveFlag_TS + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_TS(RTC_TypeDef *RTCx) +{ + return (READ_BIT(RTCx->ISR, RTC_ISR_TSF) == (RTC_ISR_TSF)); +} + +#if defined(RTC_WAKEUP_SUPPORT) +/** + * @brief Get Wakeup timer flag + * @rmtoll ISR WUTF LL_RTC_IsActiveFlag_WUT + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_WUT(RTC_TypeDef *RTCx) +{ + return (READ_BIT(RTCx->ISR, RTC_ISR_WUTF) == (RTC_ISR_WUTF)); +} +#endif /* RTC_WAKEUP_SUPPORT */ + +/** + * @brief Get Alarm B flag + * @rmtoll ISR ALRBF LL_RTC_IsActiveFlag_ALRB + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_ALRB(RTC_TypeDef *RTCx) +{ + return (READ_BIT(RTCx->ISR, RTC_ISR_ALRBF) == (RTC_ISR_ALRBF)); +} + +/** + * @brief Get Alarm A flag + * @rmtoll ISR ALRAF LL_RTC_IsActiveFlag_ALRA + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_ALRA(RTC_TypeDef *RTCx) +{ + return (READ_BIT(RTCx->ISR, RTC_ISR_ALRAF) == (RTC_ISR_ALRAF)); +} + +#if defined(RTC_TAMPER3_SUPPORT) +/** + * @brief Clear RTC_TAMP3 detection flag + * @rmtoll ISR TAMP3F LL_RTC_ClearFlag_TAMP3 + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ClearFlag_TAMP3(RTC_TypeDef *RTCx) +{ + WRITE_REG(RTCx->ISR, (~((RTC_ISR_TAMP3F | RTC_ISR_INIT) & 0x0000FFFFU) | (RTCx->ISR & RTC_ISR_INIT))); +} +#endif /* RTC_TAMPER3_SUPPORT */ + +#if defined(RTC_TAMPER2_SUPPORT) +/** + * @brief Clear RTC_TAMP2 detection flag + * @rmtoll ISR TAMP2F LL_RTC_ClearFlag_TAMP2 + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ClearFlag_TAMP2(RTC_TypeDef *RTCx) +{ + WRITE_REG(RTCx->ISR, (~((RTC_ISR_TAMP2F | RTC_ISR_INIT) & 0x0000FFFFU) | (RTCx->ISR & RTC_ISR_INIT))); +} +#endif /* RTC_TAMPER2_SUPPORT */ + +#if defined(RTC_TAMPER1_SUPPORT) +/** + * @brief Clear RTC_TAMP1 detection flag + * @rmtoll ISR TAMP1F LL_RTC_ClearFlag_TAMP1 + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ClearFlag_TAMP1(RTC_TypeDef *RTCx) +{ + WRITE_REG(RTCx->ISR, (~((RTC_ISR_TAMP1F | RTC_ISR_INIT) & 0x0000FFFFU) | (RTCx->ISR & RTC_ISR_INIT))); +} +#endif /* RTC_TAMPER1_SUPPORT */ + +/** + * @brief Clear Time-stamp overflow flag + * @rmtoll ISR TSOVF LL_RTC_ClearFlag_TSOV + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ClearFlag_TSOV(RTC_TypeDef *RTCx) +{ + WRITE_REG(RTCx->ISR, (~((RTC_ISR_TSOVF | RTC_ISR_INIT) & 0x0000FFFFU) | (RTCx->ISR & RTC_ISR_INIT))); +} + +/** + * @brief Clear Time-stamp flag + * @rmtoll ISR TSF LL_RTC_ClearFlag_TS + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ClearFlag_TS(RTC_TypeDef *RTCx) +{ + WRITE_REG(RTCx->ISR, (~((RTC_ISR_TSF | RTC_ISR_INIT) & 0x0000FFFFU) | (RTCx->ISR & RTC_ISR_INIT))); +} + +#if defined(RTC_WAKEUP_SUPPORT) +/** + * @brief Clear Wakeup timer flag + * @rmtoll ISR WUTF LL_RTC_ClearFlag_WUT + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ClearFlag_WUT(RTC_TypeDef *RTCx) +{ + WRITE_REG(RTCx->ISR, (~((RTC_ISR_WUTF | RTC_ISR_INIT) & 0x0000FFFFU) | (RTCx->ISR & RTC_ISR_INIT))); +} +#endif /* RTC_WAKEUP_SUPPORT */ + +/** + * @brief Clear Alarm B flag + * @rmtoll ISR ALRBF LL_RTC_ClearFlag_ALRB + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ClearFlag_ALRB(RTC_TypeDef *RTCx) +{ + WRITE_REG(RTCx->ISR, (~((RTC_ISR_ALRBF | RTC_ISR_INIT) & 0x0000FFFFU) | (RTCx->ISR & RTC_ISR_INIT))); +} + +/** + * @brief Clear Alarm A flag + * @rmtoll ISR ALRAF LL_RTC_ClearFlag_ALRA + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ClearFlag_ALRA(RTC_TypeDef *RTCx) +{ + WRITE_REG(RTCx->ISR, (~((RTC_ISR_ALRAF | RTC_ISR_INIT) & 0x0000FFFFU) | (RTCx->ISR & RTC_ISR_INIT))); +} + +/** + * @brief Get Initialization flag + * @rmtoll ISR INITF LL_RTC_IsActiveFlag_INIT + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_INIT(RTC_TypeDef *RTCx) +{ + return (READ_BIT(RTCx->ISR, RTC_ISR_INITF) == (RTC_ISR_INITF)); +} + +/** + * @brief Get Registers synchronization flag + * @rmtoll ISR RSF LL_RTC_IsActiveFlag_RS + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_RS(RTC_TypeDef *RTCx) +{ + return (READ_BIT(RTCx->ISR, RTC_ISR_RSF) == (RTC_ISR_RSF)); +} + +/** + * @brief Clear Registers synchronization flag + * @rmtoll ISR RSF LL_RTC_ClearFlag_RS + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ClearFlag_RS(RTC_TypeDef *RTCx) +{ + WRITE_REG(RTCx->ISR, (~((RTC_ISR_RSF | RTC_ISR_INIT) & 0x0000FFFFU) | (RTCx->ISR & RTC_ISR_INIT))); +} + +/** + * @brief Get Initialization status flag + * @rmtoll ISR INITS LL_RTC_IsActiveFlag_INITS + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_INITS(RTC_TypeDef *RTCx) +{ + return (READ_BIT(RTCx->ISR, RTC_ISR_INITS) == (RTC_ISR_INITS)); +} + +#if defined(RTC_ISR_SHPF) +/** + * @brief Get Shift operation pending flag + * @rmtoll ISR SHPF LL_RTC_IsActiveFlag_SHP + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_SHP(RTC_TypeDef *RTCx) +{ + return (READ_BIT(RTCx->ISR, RTC_ISR_SHPF) == (RTC_ISR_SHPF)); +} +#endif /* RTC_ISR_SHPF */ + +#if defined(RTC_WAKEUP_SUPPORT) +/** + * @brief Get Wakeup timer write flag + * @rmtoll ISR WUTWF LL_RTC_IsActiveFlag_WUTW + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_WUTW(RTC_TypeDef *RTCx) +{ + return (READ_BIT(RTCx->ISR, RTC_ISR_WUTWF) == (RTC_ISR_WUTWF)); +} +#endif /* RTC_WAKEUP_SUPPORT */ + +/** + * @brief Get Alarm B write flag + * @rmtoll ISR ALRBWF LL_RTC_IsActiveFlag_ALRBW + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_ALRBW(RTC_TypeDef *RTCx) +{ + return (READ_BIT(RTCx->ISR, RTC_ISR_ALRBWF) == (RTC_ISR_ALRBWF)); +} + +/** + * @brief Get Alarm A write flag + * @rmtoll ISR ALRAWF LL_RTC_IsActiveFlag_ALRAW + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_ALRAW(RTC_TypeDef *RTCx) +{ + return (READ_BIT(RTCx->ISR, RTC_ISR_ALRAWF) == (RTC_ISR_ALRAWF)); +} + +/** + * @} + */ + +/** @defgroup RTC_LL_EF_IT_Management IT_Management + * @{ + */ + +/** + * @brief Enable Time-stamp interrupt + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll CR TSIE LL_RTC_EnableIT_TS + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableIT_TS(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->CR, RTC_CR_TSIE); +} + +/** + * @brief Disable Time-stamp interrupt + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll CR TSIE LL_RTC_DisableIT_TS + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableIT_TS(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->CR, RTC_CR_TSIE); +} + +#if defined(RTC_WAKEUP_SUPPORT) +/** + * @brief Enable Wakeup timer interrupt + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll CR WUTIE LL_RTC_EnableIT_WUT + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableIT_WUT(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->CR, RTC_CR_WUTIE); +} + +/** + * @brief Disable Wakeup timer interrupt + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll CR WUTIE LL_RTC_DisableIT_WUT + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableIT_WUT(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->CR, RTC_CR_WUTIE); +} +#endif /* RTC_WAKEUP_SUPPORT */ + +/** + * @brief Enable Alarm B interrupt + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll CR ALRBIE LL_RTC_EnableIT_ALRB + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableIT_ALRB(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->CR, RTC_CR_ALRBIE); +} + +/** + * @brief Disable Alarm B interrupt + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll CR ALRBIE LL_RTC_DisableIT_ALRB + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableIT_ALRB(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->CR, RTC_CR_ALRBIE); +} + +/** + * @brief Enable Alarm A interrupt + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll CR ALRAIE LL_RTC_EnableIT_ALRA + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableIT_ALRA(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->CR, RTC_CR_ALRAIE); +} + +/** + * @brief Disable Alarm A interrupt + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll CR ALRAIE LL_RTC_DisableIT_ALRA + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableIT_ALRA(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->CR, RTC_CR_ALRAIE); +} + +/** + * @brief Enable all Tamper Interrupt + * @rmtoll TAFCR TAMPIE LL_RTC_EnableIT_TAMP + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableIT_TAMP(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->TAFCR, RTC_TAFCR_TAMPIE); +} + +/** + * @brief Disable all Tamper Interrupt + * @rmtoll TAFCR TAMPIE LL_RTC_DisableIT_TAMP + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableIT_TAMP(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->TAFCR, RTC_TAFCR_TAMPIE); +} + +/** + * @brief Check if Time-stamp interrupt is enabled or not + * @rmtoll CR TSIE LL_RTC_IsEnabledIT_TS + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsEnabledIT_TS(RTC_TypeDef *RTCx) +{ + return (READ_BIT(RTCx->CR, RTC_CR_TSIE) == (RTC_CR_TSIE)); +} + +#if defined(RTC_WAKEUP_SUPPORT) +/** + * @brief Check if Wakeup timer interrupt is enabled or not + * @rmtoll CR WUTIE LL_RTC_IsEnabledIT_WUT + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsEnabledIT_WUT(RTC_TypeDef *RTCx) +{ + return (READ_BIT(RTCx->CR, RTC_CR_WUTIE) == (RTC_CR_WUTIE)); +} +#endif /* RTC_WAKEUP_SUPPORT */ + +/** + * @brief Check if Alarm B interrupt is enabled or not + * @rmtoll CR ALRBIE LL_RTC_IsEnabledIT_ALRB + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsEnabledIT_ALRB(RTC_TypeDef *RTCx) +{ + return (READ_BIT(RTCx->CR, RTC_CR_ALRBIE) == (RTC_CR_ALRBIE)); +} + +/** + * @brief Check if Alarm A interrupt is enabled or not + * @rmtoll CR ALRAIE LL_RTC_IsEnabledIT_ALRA + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsEnabledIT_ALRA(RTC_TypeDef *RTCx) +{ + return (READ_BIT(RTCx->CR, RTC_CR_ALRAIE) == (RTC_CR_ALRAIE)); +} + +/** + * @brief Check if all the TAMPER interrupts are enabled or not + * @rmtoll TAFCR TAMPIE LL_RTC_IsEnabledIT_TAMP + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsEnabledIT_TAMP(RTC_TypeDef *RTCx) +{ + return (READ_BIT(RTCx->TAFCR, + RTC_TAFCR_TAMPIE) == (RTC_TAFCR_TAMPIE)); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup RTC_LL_EF_Init Initialization and de-initialization functions + * @{ + */ + +ErrorStatus LL_RTC_DeInit(RTC_TypeDef *RTCx); +ErrorStatus LL_RTC_Init(RTC_TypeDef *RTCx, LL_RTC_InitTypeDef *RTC_InitStruct); +void LL_RTC_StructInit(LL_RTC_InitTypeDef *RTC_InitStruct); +ErrorStatus LL_RTC_TIME_Init(RTC_TypeDef *RTCx, uint32_t RTC_Format, LL_RTC_TimeTypeDef *RTC_TimeStruct); +void LL_RTC_TIME_StructInit(LL_RTC_TimeTypeDef *RTC_TimeStruct); +ErrorStatus LL_RTC_DATE_Init(RTC_TypeDef *RTCx, uint32_t RTC_Format, LL_RTC_DateTypeDef *RTC_DateStruct); +void LL_RTC_DATE_StructInit(LL_RTC_DateTypeDef *RTC_DateStruct); +ErrorStatus LL_RTC_ALMA_Init(RTC_TypeDef *RTCx, uint32_t RTC_Format, LL_RTC_AlarmTypeDef *RTC_AlarmStruct); +ErrorStatus LL_RTC_ALMB_Init(RTC_TypeDef *RTCx, uint32_t RTC_Format, LL_RTC_AlarmTypeDef *RTC_AlarmStruct); +void LL_RTC_ALMA_StructInit(LL_RTC_AlarmTypeDef *RTC_AlarmStruct); +void LL_RTC_ALMB_StructInit(LL_RTC_AlarmTypeDef *RTC_AlarmStruct); +ErrorStatus LL_RTC_EnterInitMode(RTC_TypeDef *RTCx); +ErrorStatus LL_RTC_ExitInitMode(RTC_TypeDef *RTCx); +ErrorStatus LL_RTC_WaitForSynchro(RTC_TypeDef *RTCx); + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined(RTC) */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32L1xx_LL_RTC_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_ll_sdmmc.h b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_ll_sdmmc.h new file mode 100755 index 0000000..b8f43da --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_ll_sdmmc.h @@ -0,0 +1,912 @@ +/** + ****************************************************************************** + * @file stm32l1xx_ll_sdmmc.h + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief Header file of SDMMC HAL module. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L1xx_LL_SD_H +#define __STM32L1xx_LL_SD_H + +#if defined(STM32L151xD) || defined(STM32L152xD) || defined(STM32L162xD) + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_hal_def.h" + +/** @addtogroup STM32L1xx_HAL_Driver + * @{ + */ + +/** @addtogroup SDMMC_LL + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup SDMMC_LL_Exported_Types SDMMC_LL Exported Types + * @{ + */ + +/** + * @brief SDMMC Configuration Structure definition + */ +typedef struct +{ + uint32_t ClockEdge; /*!< Specifies the clock transition on which the bit capture is made. + This parameter can be a value of @ref SDIO_Clock_Edge */ + + uint32_t ClockBypass; /*!< Specifies whether the SDIO Clock divider bypass is + enabled or disabled. + This parameter can be a value of @ref SDIO_Clock_Bypass */ + + uint32_t ClockPowerSave; /*!< Specifies whether SDIO Clock output is enabled or + disabled when the bus is idle. + This parameter can be a value of @ref SDIO_Clock_Power_Save */ + + uint32_t BusWide; /*!< Specifies the SDIO bus width. + This parameter can be a value of @ref SDIO_Bus_Wide */ + + uint32_t HardwareFlowControl; /*!< Specifies whether the SDIO hardware flow control is enabled or disabled. + This parameter can be a value of @ref SDIO_Hardware_Flow_Control */ + + uint32_t ClockDiv; /*!< Specifies the clock frequency of the SDIO controller. + This parameter can be a value between Min_Data = 0 and Max_Data = 255 */ + +}SDIO_InitTypeDef; + + +/** + * @brief SDIO Command Control structure + */ +typedef struct +{ + uint32_t Argument; /*!< Specifies the SDIO command argument which is sent + to a card as part of a command message. If a command + contains an argument, it must be loaded into this register + before writing the command to the command register. */ + + uint32_t CmdIndex; /*!< Specifies the SDIO command index. It must be Min_Data = 0 and + Max_Data = 64 */ + + uint32_t Response; /*!< Specifies the SDIO response type. + This parameter can be a value of @ref SDIO_Response_Type */ + + uint32_t WaitForInterrupt; /*!< Specifies whether SDIO wait for interrupt request is + enabled or disabled. + This parameter can be a value of @ref SDIO_Wait_Interrupt_State */ + + uint32_t CPSM; /*!< Specifies whether SDIO Command path state machine (CPSM) + is enabled or disabled. + This parameter can be a value of @ref SDIO_CPSM_State */ +}SDIO_CmdInitTypeDef; + + +/** + * @brief SDIO Data Control structure + */ +typedef struct +{ + uint32_t DataTimeOut; /*!< Specifies the data timeout period in card bus clock periods. */ + + uint32_t DataLength; /*!< Specifies the number of data bytes to be transferred. */ + + uint32_t DataBlockSize; /*!< Specifies the data block size for block transfer. + This parameter can be a value of @ref SDIO_Data_Block_Size */ + + uint32_t TransferDir; /*!< Specifies the data transfer direction, whether the transfer + is a read or write. + This parameter can be a value of @ref SDIO_Transfer_Direction */ + + uint32_t TransferMode; /*!< Specifies whether data transfer is in stream or block mode. + This parameter can be a value of @ref SDIO_Transfer_Type */ + + uint32_t DPSM; /*!< Specifies whether SDIO Data path state machine (DPSM) + is enabled or disabled. + This parameter can be a value of @ref SDIO_DPSM_State */ +}SDIO_DataInitTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup SDMMC_LL_Exported_Constants SDMMC_LL Exported Constants + * @{ + */ + +/** @defgroup SDIO_Clock_Edge Clock Edge + * @{ + */ +#define SDIO_CLOCK_EDGE_RISING ((uint32_t)0x00000000) +#define SDIO_CLOCK_EDGE_FALLING SDIO_CLKCR_NEGEDGE + +#define IS_SDIO_CLOCK_EDGE(EDGE) (((EDGE) == SDIO_CLOCK_EDGE_RISING) || \ + ((EDGE) == SDIO_CLOCK_EDGE_FALLING)) +/** + * @} + */ + +/** @defgroup SDIO_Clock_Bypass Clock Bypass + * @{ + */ +#define SDIO_CLOCK_BYPASS_DISABLE ((uint32_t)0x00000000) +#define SDIO_CLOCK_BYPASS_ENABLE SDIO_CLKCR_BYPASS + +#define IS_SDIO_CLOCK_BYPASS(BYPASS) (((BYPASS) == SDIO_CLOCK_BYPASS_DISABLE) || \ + ((BYPASS) == SDIO_CLOCK_BYPASS_ENABLE)) +/** + * @} + */ + +/** @defgroup SDIO_Clock_Power_Save Clock Power Saving + * @{ + */ +#define SDIO_CLOCK_POWER_SAVE_DISABLE ((uint32_t)0x00000000) +#define SDIO_CLOCK_POWER_SAVE_ENABLE SDIO_CLKCR_PWRSAV + +#define IS_SDIO_CLOCK_POWER_SAVE(SAVE) (((SAVE) == SDIO_CLOCK_POWER_SAVE_DISABLE) || \ + ((SAVE) == SDIO_CLOCK_POWER_SAVE_ENABLE)) +/** + * @} + */ + +/** @defgroup SDIO_Bus_Wide Bus Width + * @{ + */ +#define SDIO_BUS_WIDE_1B ((uint32_t)0x00000000) +#define SDIO_BUS_WIDE_4B SDIO_CLKCR_WIDBUS_0 +#define SDIO_BUS_WIDE_8B SDIO_CLKCR_WIDBUS_1 + +#define IS_SDIO_BUS_WIDE(WIDE) (((WIDE) == SDIO_BUS_WIDE_1B) || \ + ((WIDE) == SDIO_BUS_WIDE_4B) || \ + ((WIDE) == SDIO_BUS_WIDE_8B)) +/** + * @} + */ + +/** @defgroup SDIO_Hardware_Flow_Control Hardware Flow Control + * @{ + */ +#define SDIO_HARDWARE_FLOW_CONTROL_DISABLE ((uint32_t)0x00000000) +#define SDIO_HARDWARE_FLOW_CONTROL_ENABLE SDIO_CLKCR_HWFC_EN + +#define IS_SDIO_HARDWARE_FLOW_CONTROL(CONTROL) (((CONTROL) == SDIO_HARDWARE_FLOW_CONTROL_DISABLE) || \ + ((CONTROL) == SDIO_HARDWARE_FLOW_CONTROL_ENABLE)) +/** + * @} + */ + +/** @defgroup SDIO_Clock_Division Clock Division + * @{ + */ +#define IS_SDIO_CLKDIV(DIV) ((DIV) <= 0xFF) +/** + * @} + */ + +/** @defgroup SDIO_Command_Index Command Index + * @{ + */ +#define IS_SDIO_CMD_INDEX(INDEX) ((INDEX) < 0x40) +/** + * @} + */ + +/** @defgroup SDIO_Response_Type Response Type + * @{ + */ +#define SDIO_RESPONSE_NO ((uint32_t)0x00000000) +#define SDIO_RESPONSE_SHORT SDIO_CMD_WAITRESP_0 +#define SDIO_RESPONSE_LONG SDIO_CMD_WAITRESP + +#define IS_SDIO_RESPONSE(RESPONSE) (((RESPONSE) == SDIO_RESPONSE_NO) || \ + ((RESPONSE) == SDIO_RESPONSE_SHORT) || \ + ((RESPONSE) == SDIO_RESPONSE_LONG)) +/** + * @} + */ + +/** @defgroup SDIO_Wait_Interrupt_State Wait Interrupt + * @{ + */ +#define SDIO_WAIT_NO ((uint32_t)0x00000000) +#define SDIO_WAIT_IT SDIO_CMD_WAITINT +#define SDIO_WAIT_PEND SDIO_CMD_WAITPEND + +#define IS_SDIO_WAIT(WAIT) (((WAIT) == SDIO_WAIT_NO) || \ + ((WAIT) == SDIO_WAIT_IT) || \ + ((WAIT) == SDIO_WAIT_PEND)) +/** + * @} + */ + +/** @defgroup SDIO_CPSM_State CPSM State + * @{ + */ +#define SDIO_CPSM_DISABLE ((uint32_t)0x00000000) +#define SDIO_CPSM_ENABLE SDIO_CMD_CPSMEN + +#define IS_SDIO_CPSM(CPSM) (((CPSM) == SDIO_CPSM_DISABLE) || \ + ((CPSM) == SDIO_CPSM_ENABLE)) +/** + * @} + */ + +/** @defgroup SDIO_Response_Registers Response Register + * @{ + */ +#define SDIO_RESP1 ((uint32_t)0x00000000) +#define SDIO_RESP2 ((uint32_t)0x00000004) +#define SDIO_RESP3 ((uint32_t)0x00000008) +#define SDIO_RESP4 ((uint32_t)0x0000000C) + +#define IS_SDIO_RESP(RESP) (((RESP) == SDIO_RESP1) || \ + ((RESP) == SDIO_RESP2) || \ + ((RESP) == SDIO_RESP3) || \ + ((RESP) == SDIO_RESP4)) +/** + * @} + */ + +/** @defgroup SDIO_Data_Length Data Lenght + * @{ + */ +#define IS_SDIO_DATA_LENGTH(LENGTH) ((LENGTH) <= 0x01FFFFFF) +/** + * @} + */ + +/** @defgroup SDIO_Data_Block_Size Data Block Size + * @{ + */ +#define SDIO_DATABLOCK_SIZE_1B ((uint32_t)0x00000000) +#define SDIO_DATABLOCK_SIZE_2B SDIO_DCTRL_DBLOCKSIZE_0 +#define SDIO_DATABLOCK_SIZE_4B SDIO_DCTRL_DBLOCKSIZE_1 +#define SDIO_DATABLOCK_SIZE_8B ((uint32_t)0x00000030) +#define SDIO_DATABLOCK_SIZE_16B SDIO_DCTRL_DBLOCKSIZE_2 +#define SDIO_DATABLOCK_SIZE_32B ((uint32_t)0x00000050) +#define SDIO_DATABLOCK_SIZE_64B ((uint32_t)0x00000060) +#define SDIO_DATABLOCK_SIZE_128B ((uint32_t)0x00000070) +#define SDIO_DATABLOCK_SIZE_256B SDIO_DCTRL_DBLOCKSIZE_3 +#define SDIO_DATABLOCK_SIZE_512B ((uint32_t)0x00000090) +#define SDIO_DATABLOCK_SIZE_1024B ((uint32_t)0x000000A0) +#define SDIO_DATABLOCK_SIZE_2048B ((uint32_t)0x000000B0) +#define SDIO_DATABLOCK_SIZE_4096B ((uint32_t)0x000000C0) +#define SDIO_DATABLOCK_SIZE_8192B ((uint32_t)0x000000D0) +#define SDIO_DATABLOCK_SIZE_16384B ((uint32_t)0x000000E0) + +#define IS_SDIO_BLOCK_SIZE(SIZE) (((SIZE) == SDIO_DATABLOCK_SIZE_1B) || \ + ((SIZE) == SDIO_DATABLOCK_SIZE_2B) || \ + ((SIZE) == SDIO_DATABLOCK_SIZE_4B) || \ + ((SIZE) == SDIO_DATABLOCK_SIZE_8B) || \ + ((SIZE) == SDIO_DATABLOCK_SIZE_16B) || \ + ((SIZE) == SDIO_DATABLOCK_SIZE_32B) || \ + ((SIZE) == SDIO_DATABLOCK_SIZE_64B) || \ + ((SIZE) == SDIO_DATABLOCK_SIZE_128B) || \ + ((SIZE) == SDIO_DATABLOCK_SIZE_256B) || \ + ((SIZE) == SDIO_DATABLOCK_SIZE_512B) || \ + ((SIZE) == SDIO_DATABLOCK_SIZE_1024B) || \ + ((SIZE) == SDIO_DATABLOCK_SIZE_2048B) || \ + ((SIZE) == SDIO_DATABLOCK_SIZE_4096B) || \ + ((SIZE) == SDIO_DATABLOCK_SIZE_8192B) || \ + ((SIZE) == SDIO_DATABLOCK_SIZE_16384B)) +/** + * @} + */ + +/** @defgroup SDIO_Transfer_Direction Transfer Direction + * @{ + */ +#define SDIO_TRANSFER_DIR_TO_CARD ((uint32_t)0x00000000) +#define SDIO_TRANSFER_DIR_TO_SDIO SDIO_DCTRL_DTDIR + +#define IS_SDIO_TRANSFER_DIR(DIR) (((DIR) == SDIO_TRANSFER_DIR_TO_CARD) || \ + ((DIR) == SDIO_TRANSFER_DIR_TO_SDIO)) +/** + * @} + */ + +/** @defgroup SDIO_Transfer_Type Transfer Type + * @{ + */ +#define SDIO_TRANSFER_MODE_BLOCK ((uint32_t)0x00000000) +#define SDIO_TRANSFER_MODE_STREAM SDIO_DCTRL_DTMODE + +#define IS_SDIO_TRANSFER_MODE(MODE) (((MODE) == SDIO_TRANSFER_MODE_BLOCK) || \ + ((MODE) == SDIO_TRANSFER_MODE_STREAM)) +/** + * @} + */ + +/** @defgroup SDIO_DPSM_State DPSM State + * @{ + */ +#define SDIO_DPSM_DISABLE ((uint32_t)0x00000000) +#define SDIO_DPSM_ENABLE SDIO_DCTRL_DTEN + +#define IS_SDIO_DPSM(DPSM) (((DPSM) == SDIO_DPSM_DISABLE) ||\ + ((DPSM) == SDIO_DPSM_ENABLE)) +/** + * @} + */ + +/** @defgroup SDIO_Read_Wait_Mode Read Wait Mode + * @{ + */ +#define SDIO_READ_WAIT_MODE_DATA2 ((uint32_t)0x00000000) +#define SDIO_READ_WAIT_MODE_CLK ((uint32_t)0x00000001) + +#define IS_SDIO_READWAIT_MODE(MODE) (((MODE) == SDIO_READ_WAIT_MODE_CLK) || \ + ((MODE) == SDIO_READ_WAIT_MODE_DATA2)) +/** + * @} + */ + +/** @defgroup SDIO_Interrupt_sources Interrupt Sources + * @{ + */ +#define SDIO_IT_CCRCFAIL SDIO_STA_CCRCFAIL +#define SDIO_IT_DCRCFAIL SDIO_STA_DCRCFAIL +#define SDIO_IT_CTIMEOUT SDIO_STA_CTIMEOUT +#define SDIO_IT_DTIMEOUT SDIO_STA_DTIMEOUT +#define SDIO_IT_TXUNDERR SDIO_STA_TXUNDERR +#define SDIO_IT_RXOVERR SDIO_STA_RXOVERR +#define SDIO_IT_CMDREND SDIO_STA_CMDREND +#define SDIO_IT_CMDSENT SDIO_STA_CMDSENT +#define SDIO_IT_DATAEND SDIO_STA_DATAEND +#define SDIO_IT_STBITERR SDIO_STA_STBITERR +#define SDIO_IT_DBCKEND SDIO_STA_DBCKEND +#define SDIO_IT_CMDACT SDIO_STA_CMDACT +#define SDIO_IT_TXACT SDIO_STA_TXACT +#define SDIO_IT_RXACT SDIO_STA_RXACT +#define SDIO_IT_TXFIFOHE SDIO_STA_TXFIFOHE +#define SDIO_IT_RXFIFOHF SDIO_STA_RXFIFOHF +#define SDIO_IT_TXFIFOF SDIO_STA_TXFIFOF +#define SDIO_IT_RXFIFOF SDIO_STA_RXFIFOF +#define SDIO_IT_TXFIFOE SDIO_STA_TXFIFOE +#define SDIO_IT_RXFIFOE SDIO_STA_RXFIFOE +#define SDIO_IT_TXDAVL SDIO_STA_TXDAVL +#define SDIO_IT_RXDAVL SDIO_STA_RXDAVL +#define SDIO_IT_SDIOIT SDIO_STA_SDIOIT +#define SDIO_IT_CEATAEND SDIO_STA_CEATAEND +/** + * @} + */ + +/** @defgroup SDIO_Flags Flags + * @{ + */ +#define SDIO_FLAG_CCRCFAIL SDIO_STA_CCRCFAIL +#define SDIO_FLAG_DCRCFAIL SDIO_STA_DCRCFAIL +#define SDIO_FLAG_CTIMEOUT SDIO_STA_CTIMEOUT +#define SDIO_FLAG_DTIMEOUT SDIO_STA_DTIMEOUT +#define SDIO_FLAG_TXUNDERR SDIO_STA_TXUNDERR +#define SDIO_FLAG_RXOVERR SDIO_STA_RXOVERR +#define SDIO_FLAG_CMDREND SDIO_STA_CMDREND +#define SDIO_FLAG_CMDSENT SDIO_STA_CMDSENT +#define SDIO_FLAG_DATAEND SDIO_STA_DATAEND +#define SDIO_FLAG_STBITERR SDIO_STA_STBITERR +#define SDIO_FLAG_DBCKEND SDIO_STA_DBCKEND +#define SDIO_FLAG_CMDACT SDIO_STA_CMDACT +#define SDIO_FLAG_TXACT SDIO_STA_TXACT +#define SDIO_FLAG_RXACT SDIO_STA_RXACT +#define SDIO_FLAG_TXFIFOHE SDIO_STA_TXFIFOHE +#define SDIO_FLAG_RXFIFOHF SDIO_STA_RXFIFOHF +#define SDIO_FLAG_TXFIFOF SDIO_STA_TXFIFOF +#define SDIO_FLAG_RXFIFOF SDIO_STA_RXFIFOF +#define SDIO_FLAG_TXFIFOE SDIO_STA_TXFIFOE +#define SDIO_FLAG_RXFIFOE SDIO_STA_RXFIFOE +#define SDIO_FLAG_TXDAVL SDIO_STA_TXDAVL +#define SDIO_FLAG_RXDAVL SDIO_STA_RXDAVL +#define SDIO_FLAG_SDIOIT SDIO_STA_SDIOIT +#define SDIO_FLAG_CEATAEND SDIO_STA_CEATAEND +/** + * @} + */ + +/** + * @} + */ +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup SDMMC_LL_Exported_macros SDMMC_LL Exported Macros + * @{ + */ + +/** @defgroup SDMMC_LL_Alias_Region Bit Address in the alias region + * @{ + */ +/* ------------ SDIO registers bit address in the alias region -------------- */ +#define SDIO_OFFSET (SDIO_BASE - PERIPH_BASE) + +/* --- CLKCR Register ---*/ +/* Alias word address of CLKEN bit */ +#define CLKCR_OFFSET (SDIO_OFFSET + 0x04) +#define CLKEN_BITNUMBER 0x08 +#define CLKCR_CLKEN_BB (PERIPH_BB_BASE + (CLKCR_OFFSET * 32) + (CLKEN_BITNUMBER * 4)) + +/* --- CMD Register ---*/ +/* Alias word address of SDIOSUSPEND bit */ +#define CMD_OFFSET (SDIO_OFFSET + 0x0C) +#define SDIOSUSPEND_BITNUMBER 0x0B +#define CMD_SDIOSUSPEND_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32) + (SDIOSUSPEND_BITNUMBER * 4)) + +/* Alias word address of ENCMDCOMPL bit */ +#define ENCMDCOMPL_BITNUMBER 0x0C +#define CMD_ENCMDCOMPL_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32) + (ENCMDCOMPL_BITNUMBER * 4)) + +/* Alias word address of NIEN bit */ +#define NIEN_BITNUMBER 0x0D +#define CMD_NIEN_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32) + (NIEN_BITNUMBER * 4)) + +/* Alias word address of ATACMD bit */ +#define ATACMD_BITNUMBER 0x0E +#define CMD_ATACMD_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32) + (ATACMD_BITNUMBER * 4)) + +/* --- DCTRL Register ---*/ +/* Alias word address of DMAEN bit */ +#define DCTRL_OFFSET (SDIO_OFFSET + 0x2C) +#define DMAEN_BITNUMBER 0x03 +#define DCTRL_DMAEN_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (DMAEN_BITNUMBER * 4)) + +/* Alias word address of RWSTART bit */ +#define RWSTART_BITNUMBER 0x08 +#define DCTRL_RWSTART_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (RWSTART_BITNUMBER * 4)) + +/* Alias word address of RWSTOP bit */ +#define RWSTOP_BITNUMBER 0x09 +#define DCTRL_RWSTOP_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (RWSTOP_BITNUMBER * 4)) + +/* Alias word address of RWMOD bit */ +#define RWMOD_BITNUMBER 0x0A +#define DCTRL_RWMOD_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (RWMOD_BITNUMBER * 4)) + +/* Alias word address of SDIOEN bit */ +#define SDIOEN_BITNUMBER 0x0B +#define DCTRL_SDIOEN_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (SDIOEN_BITNUMBER * 4)) +/** + * @} + */ + +/** @defgroup SDMMC_LL_Register Bits And Addresses Definitions + * @brief SDMMC_LL registers bit address in the alias region + * @{ + */ + +/* ---------------------- SDIO registers bit mask --------------------------- */ +/* --- CLKCR Register ---*/ +/* CLKCR register clear mask */ +#define CLKCR_CLEAR_MASK ((uint32_t)(SDIO_CLKCR_CLKDIV | SDIO_CLKCR_PWRSAV |\ + SDIO_CLKCR_BYPASS | SDIO_CLKCR_WIDBUS |\ + SDIO_CLKCR_NEGEDGE | SDIO_CLKCR_HWFC_EN)) + +/* --- PWRCTRL Register ---*/ +/* --- DCTRL Register ---*/ +/* SDIO DCTRL Clear Mask */ +#define DCTRL_CLEAR_MASK ((uint32_t)(SDIO_DCTRL_DTEN | SDIO_DCTRL_DTDIR |\ + SDIO_DCTRL_DTMODE | SDIO_DCTRL_DBLOCKSIZE)) + +/* --- CMD Register ---*/ +/* CMD Register clear mask */ +#define CMD_CLEAR_MASK ((uint32_t)(SDIO_CMD_CMDINDEX | SDIO_CMD_WAITRESP |\ + SDIO_CMD_WAITINT | SDIO_CMD_WAITPEND |\ + SDIO_CMD_CPSMEN | SDIO_CMD_SDIOSUSPEND)) + +/* SDIO RESP Registers Address */ +#define SDIO_RESP_ADDR ((uint32_t)(SDIO_BASE + 0x14)) + +/* SDIO Initialization Frequency (400KHz max) */ +#define SDIO_INIT_CLK_DIV ((uint8_t)0x76) + +/* SDIO Data Transfer Frequency */ +#define SDIO_TRANSFER_CLK_DIV ((uint8_t)0x4) + +/** + * @} + */ + +/** @defgroup SDMMC_LL_Interrupt_Clock Interrupt And Clock Configuration + * @brief macros to handle interrupts and specific clock configurations + * @{ + */ + +/** + * @brief Enable the SDIO device. + * @retval None + */ +#define __SDIO_ENABLE() (*(__IO uint32_t *)CLKCR_CLKEN_BB = ENABLE) + +/** + * @brief Disable the SDIO device. + * @retval None + */ +#define __SDIO_DISABLE() (*(__IO uint32_t *)CLKCR_CLKEN_BB = DISABLE) + +/** + * @brief Enable the SDIO DMA transfer. + * @retval None + */ +#define __SDIO_DMA_ENABLE() (*(__IO uint32_t *)DCTRL_DMAEN_BB = ENABLE) + +/** + * @brief Disable the SDIO DMA transfer. + * @retval None + */ +#define __SDIO_DMA_DISABLE() (*(__IO uint32_t *)DCTRL_DMAEN_BB = DISABLE) + +/** + * @brief Enable the SDIO device interrupt. + * @param __INSTANCE__ : Pointer to SDIO register base + * @param __INTERRUPT__ : specifies the SDIO interrupt sources to be enabled. + * This parameter can be one or a combination of the following values: + * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt + * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt + * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt + * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt + * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt + * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt + * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt + * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt + * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt + * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide + * bus mode interrupt + * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt + * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt + * @arg SDIO_IT_TXACT: Data transmit in progress interrupt + * @arg SDIO_IT_RXACT: Data receive in progress interrupt + * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt + * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt + * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt + * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt + * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt + * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt + * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt + * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt + * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt + * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 interrupt + * @retval None + */ +#define __SDIO_ENABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->MASK |= (__INTERRUPT__)) + +/** + * @brief Disable the SDIO device interrupt. + * @param __INSTANCE__ : Pointer to SDIO register base + * @param __INTERRUPT__ : specifies the SDIO interrupt sources to be disabled. + * This parameter can be one or a combination of the following values: + * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt + * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt + * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt + * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt + * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt + * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt + * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt + * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt + * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt + * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide + * bus mode interrupt + * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt + * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt + * @arg SDIO_IT_TXACT: Data transmit in progress interrupt + * @arg SDIO_IT_RXACT: Data receive in progress interrupt + * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt + * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt + * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt + * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt + * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt + * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt + * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt + * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt + * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt + * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 interrupt + * @retval None + */ +#define __SDIO_DISABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->MASK &= ~(__INTERRUPT__)) + +/** + * @brief Checks whether the specified SDIO flag is set or not. + * @param __INSTANCE__ : Pointer to SDIO register base + * @param __FLAG__: specifies the flag to check. + * This parameter can be one of the following values: + * @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed) + * @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed) + * @arg SDIO_FLAG_CTIMEOUT: Command response timeout + * @arg SDIO_FLAG_DTIMEOUT: Data timeout + * @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error + * @arg SDIO_FLAG_RXOVERR: Received FIFO overrun error + * @arg SDIO_FLAG_CMDREND: Command response received (CRC check passed) + * @arg SDIO_FLAG_CMDSENT: Command sent (no response required) + * @arg SDIO_FLAG_DATAEND: Data end (data counter, SDIDCOUNT, is zero) + * @arg SDIO_FLAG_STBITERR: Start bit not detected on all data signals in wide bus mode. + * @arg SDIO_FLAG_DBCKEND: Data block sent/received (CRC check passed) + * @arg SDIO_FLAG_CMDACT: Command transfer in progress + * @arg SDIO_FLAG_TXACT: Data transmit in progress + * @arg SDIO_FLAG_RXACT: Data receive in progress + * @arg SDIO_FLAG_TXFIFOHE: Transmit FIFO Half Empty + * @arg SDIO_FLAG_RXFIFOHF: Receive FIFO Half Full + * @arg SDIO_FLAG_TXFIFOF: Transmit FIFO full + * @arg SDIO_FLAG_RXFIFOF: Receive FIFO full + * @arg SDIO_FLAG_TXFIFOE: Transmit FIFO empty + * @arg SDIO_FLAG_RXFIFOE: Receive FIFO empty + * @arg SDIO_FLAG_TXDAVL: Data available in transmit FIFO + * @arg SDIO_FLAG_RXDAVL: Data available in receive FIFO + * @arg SDIO_FLAG_SDIOIT: SD I/O interrupt received + * @arg SDIO_FLAG_CEATAEND: CE-ATA command completion signal received for CMD61 + * @retval The new state of SDIO_FLAG (SET or RESET). + */ +#define __SDIO_GET_FLAG(__INSTANCE__, __FLAG__) (((__INSTANCE__)->STA &(__FLAG__)) != RESET) + + +/** + * @brief Clears the SDIO pending flags. + * @param __INSTANCE__ : Pointer to SDIO register base + * @param __FLAG__: specifies the flag to clear. + * This parameter can be one or a combination of the following values: + * @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed) + * @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed) + * @arg SDIO_FLAG_CTIMEOUT: Command response timeout + * @arg SDIO_FLAG_DTIMEOUT: Data timeout + * @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error + * @arg SDIO_FLAG_RXOVERR: Received FIFO overrun error + * @arg SDIO_FLAG_CMDREND: Command response received (CRC check passed) + * @arg SDIO_FLAG_CMDSENT: Command sent (no response required) + * @arg SDIO_FLAG_DATAEND: Data end (data counter, SDIDCOUNT, is zero) + * @arg SDIO_FLAG_STBITERR: Start bit not detected on all data signals in wide bus mode + * @arg SDIO_FLAG_DBCKEND: Data block sent/received (CRC check passed) + * @arg SDIO_FLAG_SDIOIT: SD I/O interrupt received + * @arg SDIO_FLAG_CEATAEND: CE-ATA command completion signal received for CMD61 + * @retval None + */ +#define __SDIO_CLEAR_FLAG(__INSTANCE__, __FLAG__) ((__INSTANCE__)->ICR = (__FLAG__)) + +/** + * @brief Checks whether the specified SDIO interrupt has occurred or not. + * @param __INSTANCE__ : Pointer to SDIO register base + * @param __INTERRUPT__: specifies the SDIO interrupt source to check. + * This parameter can be one of the following values: + * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt + * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt + * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt + * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt + * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt + * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt + * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt + * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt + * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt + * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide + * bus mode interrupt + * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt + * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt + * @arg SDIO_IT_TXACT: Data transmit in progress interrupt + * @arg SDIO_IT_RXACT: Data receive in progress interrupt + * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt + * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt + * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt + * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt + * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt + * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt + * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt + * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt + * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt + * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 interrupt + * @retval The new state of SDIO_IT (SET or RESET). + */ +#define __SDIO_GET_IT (__INSTANCE__, __INTERRUPT__) (((__INSTANCE__)->STA &(__INTERRUPT__)) == (__INTERRUPT__)) + +/** + * @brief Clears the SDIO's interrupt pending bits. + * @param __INSTANCE__ : Pointer to SDIO register base + * @param __INTERRUPT__: specifies the interrupt pending bit to clear. + * This parameter can be one or a combination of the following values: + * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt + * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt + * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt + * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt + * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt + * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt + * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt + * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt + * @arg SDIO_IT_DATAEND: Data end (data counter, SDIO_DCOUNT, is zero) interrupt + * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide + * bus mode interrupt + * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt + * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 + * @retval None + */ +#define __SDIO_CLEAR_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->ICR = (__INTERRUPT__)) + +/** + * @brief Enable Start the SD I/O Read Wait operation. + * @retval None + */ +#define __SDIO_START_READWAIT_ENABLE() (*(__IO uint32_t *) DCTRL_RWSTART_BB = ENABLE) + +/** + * @brief Disable Start the SD I/O Read Wait operations. + * @retval None + */ +#define __SDIO_START_READWAIT_DISABLE() (*(__IO uint32_t *) DCTRL_RWSTART_BB = DISABLE) + +/** + * @brief Enable Start the SD I/O Read Wait operation. + * @retval None + */ +#define __SDIO_STOP_READWAIT_ENABLE() (*(__IO uint32_t *) DCTRL_RWSTOP_BB = ENABLE) + +/** + * @brief Disable Stop the SD I/O Read Wait operations. + * @retval None + */ +#define __SDIO_STOP_READWAIT_DISABLE() (*(__IO uint32_t *) DCTRL_RWSTOP_BB = DISABLE) + +/** + * @brief Enable the SD I/O Mode Operation. + * @retval None + */ +#define __SDIO_OPERATION_ENABLE() (*(__IO uint32_t *) DCTRL_SDIOEN_BB = ENABLE) + +/** + * @brief Disable the SD I/O Mode Operation. + * @retval None + */ +#define __SDIO_OPERATION_DISABLE() (*(__IO uint32_t *) DCTRL_SDIOEN_BB = DISABLE) + +/** + * @brief Enable the SD I/O Suspend command sending. + * @retval None + */ +#define __SDIO_SUSPEND_CMD_ENABLE() (*(__IO uint32_t *) CMD_SDIOSUSPEND_BB = ENABLE) + +/** + * @brief Disable the SD I/O Suspend command sending. + * @retval None + */ +#define __SDIO_SUSPEND_CMD_DISABLE() (*(__IO uint32_t *) CMD_SDIOSUSPEND_BB = DISABLE) + +/** + * @brief Enable the command completion signal. + * @retval None + */ +#define __SDIO_CEATA_CMD_COMPLETION_ENABLE() (*(__IO uint32_t *) CMD_ENCMDCOMPL_BB = ENABLE) + +/** + * @brief Disable the command completion signal. + * @retval None + */ +#define __SDIO_CEATA_CMD_COMPLETION_DISABLE() (*(__IO uint32_t *) CMD_ENCMDCOMPL_BB = DISABLE) + +/** + * @brief Enable the CE-ATA interrupt. + * @retval None + */ +#define __SDIO_CEATA_ENABLE_IT() (*(__IO uint32_t *) CMD_NIEN_BB = (uint32_t)0) + +/** + * @brief Disable the CE-ATA interrupt. + * @retval None + */ +#define __SDIO_CEATA_DISABLE_IT() (*(__IO uint32_t *) CMD_NIEN_BB = (uint32_t)1) + +/** + * @brief Enable send CE-ATA command (CMD61). + * @retval None + */ +#define __SDIO_CEATA_SENDCMD_ENABLE() (*(__IO uint32_t *) CMD_ATACMD_BB = ENABLE) + +/** + * @brief Disable send CE-ATA command (CMD61). + * @retval None + */ +#define __SDIO_CEATA_SENDCMD_DISABLE() (*(__IO uint32_t *) CMD_ATACMD_BB = DISABLE) + +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup SDMMC_LL_Exported_Functions + * @{ + */ + +/* Initialization/de-initialization functions **********************************/ +/** @addtogroup HAL_SDMMC_LL_Group1 + * @{ + */ +HAL_StatusTypeDef SDIO_Init(SDIO_TypeDef *SDIOx, SDIO_InitTypeDef Init); +/** + * @} + */ + +/* I/O operation functions *****************************************************/ +/** @addtogroup HAL_SDMMC_LL_Group2 + * @{ + */ +/* Blocking mode: Polling */ +uint32_t SDIO_ReadFIFO(SDIO_TypeDef *SDIOx); +HAL_StatusTypeDef SDIO_WriteFIFO(SDIO_TypeDef *SDIOx, uint32_t *pWriteData); +/** + * @} + */ + +/* Peripheral Control functions ************************************************/ +/** @addtogroup HAL_SDMMC_LL_Group3 + * @{ + */ +HAL_StatusTypeDef SDIO_PowerState_ON(SDIO_TypeDef *SDIOx); +HAL_StatusTypeDef SDIO_PowerState_OFF(SDIO_TypeDef *SDIOx); +uint32_t SDIO_GetPowerState(SDIO_TypeDef *SDIOx); + +/* Command path state machine (CPSM) management functions */ +HAL_StatusTypeDef SDIO_SendCommand(SDIO_TypeDef *SDIOx, SDIO_CmdInitTypeDef *SDIO_CmdInitStruct); +uint8_t SDIO_GetCommandResponse(SDIO_TypeDef *SDIOx); +uint32_t SDIO_GetResponse(uint32_t SDIO_RESP); + +/* Data path state machine (DPSM) management functions */ +HAL_StatusTypeDef SDIO_DataConfig(SDIO_TypeDef *SDIOx, SDIO_DataInitTypeDef* SDIO_DataInitStruct); +uint32_t SDIO_GetDataCounter(SDIO_TypeDef *SDIOx); +uint32_t SDIO_GetFIFOCount(SDIO_TypeDef *SDIOx); + +/* SDIO IO Cards mode management functions */ +HAL_StatusTypeDef SDIO_SetSDIOReadWaitMode(uint32_t SDIO_ReadWaitMode); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32L151xD || STM32L152xD || STM32L162xD */ + +#endif /* __STM32L1xx_LL_SD_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_ll_spi.h b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_ll_spi.h new file mode 100755 index 0000000..c7ba189 --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_ll_spi.h @@ -0,0 +1,2007 @@ +/** + ****************************************************************************** + * @file stm32l1xx_ll_spi.h + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief Header file of SPI LL module. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L1xx_LL_SPI_H +#define __STM32L1xx_LL_SPI_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx.h" + +/** @addtogroup STM32L1xx_LL_Driver + * @{ + */ + +#if defined (SPI1) || defined (SPI2) || defined (SPI3) + +/** @defgroup SPI_LL SPI + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup SPI_LL_ES_INIT SPI Exported Init structure + * @{ + */ + +/** + * @brief SPI Init structures definition + */ +typedef struct +{ + uint32_t TransferDirection; /*!< Specifies the SPI unidirectional or bidirectional data mode. + This parameter can be a value of @ref SPI_LL_EC_TRANSFER_MODE. + + This feature can be modified afterwards using unitary function @ref LL_SPI_SetTransferDirection().*/ + + uint32_t Mode; /*!< Specifies the SPI mode (Master/Slave). + This parameter can be a value of @ref SPI_LL_EC_MODE. + + This feature can be modified afterwards using unitary function @ref LL_SPI_SetMode().*/ + + uint32_t DataWidth; /*!< Specifies the SPI data width. + This parameter can be a value of @ref SPI_LL_EC_DATAWIDTH. + + This feature can be modified afterwards using unitary function @ref LL_SPI_SetDataWidth().*/ + + uint32_t ClockPolarity; /*!< Specifies the serial clock steady state. + This parameter can be a value of @ref SPI_LL_EC_POLARITY. + + This feature can be modified afterwards using unitary function @ref LL_SPI_SetClockPolarity().*/ + + uint32_t ClockPhase; /*!< Specifies the clock active edge for the bit capture. + This parameter can be a value of @ref SPI_LL_EC_PHASE. + + This feature can be modified afterwards using unitary function @ref LL_SPI_SetClockPhase().*/ + + uint32_t NSS; /*!< Specifies whether the NSS signal is managed by hardware (NSS pin) or by software using the SSI bit. + This parameter can be a value of @ref SPI_LL_EC_NSS_MODE. + + This feature can be modified afterwards using unitary function @ref LL_SPI_SetNSSMode().*/ + + uint32_t BaudRate; /*!< Specifies the BaudRate prescaler value which will be used to configure the transmit and receive SCK clock. + This parameter can be a value of @ref SPI_LL_EC_BAUDRATEPRESCALER. + @note The communication clock is derived from the master clock. The slave clock does not need to be set. + + This feature can be modified afterwards using unitary function @ref LL_SPI_SetBaudRatePrescaler().*/ + + uint32_t BitOrder; /*!< Specifies whether data transfers start from MSB or LSB bit. + This parameter can be a value of @ref SPI_LL_EC_BIT_ORDER. + + This feature can be modified afterwards using unitary function @ref LL_SPI_SetTransferBitOrder().*/ + + uint32_t CRCCalculation; /*!< Specifies if the CRC calculation is enabled or not. + This parameter can be a value of @ref SPI_LL_EC_CRC_CALCULATION. + + This feature can be modified afterwards using unitary functions @ref LL_SPI_EnableCRC() and @ref LL_SPI_DisableCRC().*/ + + uint32_t CRCPoly; /*!< Specifies the polynomial used for the CRC calculation. + This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFFFF. + + This feature can be modified afterwards using unitary function @ref LL_SPI_SetCRCPolynomial().*/ + +} LL_SPI_InitTypeDef; + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup SPI_LL_Exported_Constants SPI Exported Constants + * @{ + */ + +/** @defgroup SPI_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_SPI_ReadReg function + * @{ + */ +#define LL_SPI_SR_RXNE SPI_SR_RXNE /*!< Rx buffer not empty flag */ +#define LL_SPI_SR_TXE SPI_SR_TXE /*!< Tx buffer empty flag */ +#define LL_SPI_SR_BSY SPI_SR_BSY /*!< Busy flag */ +#define LL_SPI_SR_UDR SPI_SR_UDR /*!< Underrun flag */ +#define LL_SPI_SR_CRCERR SPI_SR_CRCERR /*!< CRC error flag */ +#define LL_SPI_SR_MODF SPI_SR_MODF /*!< Mode fault flag */ +#define LL_SPI_SR_OVR SPI_SR_OVR /*!< Overrun flag */ +#define LL_SPI_SR_FRE SPI_SR_FRE /*!< TI mode frame format error flag */ +/** + * @} + */ + +/** @defgroup SPI_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_SPI_ReadReg and LL_SPI_WriteReg functions + * @{ + */ +#define LL_SPI_CR2_RXNEIE SPI_CR2_RXNEIE /*!< Rx buffer not empty interrupt enable */ +#define LL_SPI_CR2_TXEIE SPI_CR2_TXEIE /*!< Tx buffer empty interrupt enable */ +#define LL_SPI_CR2_ERRIE SPI_CR2_ERRIE /*!< Error interrupt enable */ +/** + * @} + */ + +/** @defgroup SPI_LL_EC_MODE Operation Mode + * @{ + */ +#define LL_SPI_MODE_MASTER (SPI_CR1_MSTR | SPI_CR1_SSI) /*!< Master configuration */ +#define LL_SPI_MODE_SLAVE ((uint32_t)0x00000000U) /*!< Slave configuration */ +/** + * @} + */ + +#if defined (SPI_CR2_FRF) +/** @defgroup SPI_LL_EC_PROTOCOL Serial Protocol + * @{ + */ +#define LL_SPI_PROTOCOL_MOTOROLA ((uint32_t)0x00000000U) /*!< Motorola mode. Used as default value */ +#define LL_SPI_PROTOCOL_TI (SPI_CR2_FRF) /*!< TI mode */ +/** + * @} + */ +#endif /* SPI_CR2_FRF */ + +/** @defgroup SPI_LL_EC_PHASE Clock Phase + * @{ + */ +#define LL_SPI_PHASE_1EDGE ((uint32_t)0x00000000U) /*!< First clock transition is the first data capture edge */ +#define LL_SPI_PHASE_2EDGE (SPI_CR1_CPHA) /*!< Second clock transition is the first data capture edge */ +/** + * @} + */ + +/** @defgroup SPI_LL_EC_POLARITY Clock Polarity + * @{ + */ +#define LL_SPI_POLARITY_LOW ((uint32_t)0x00000000U) /*!< Clock to 0 when idle */ +#define LL_SPI_POLARITY_HIGH (SPI_CR1_CPOL) /*!< Clock to 1 when idle */ +/** + * @} + */ + +/** @defgroup SPI_LL_EC_BAUDRATEPRESCALER Baud Rate Prescaler + * @{ + */ +#define LL_SPI_BAUDRATEPRESCALER_DIV2 ((uint32_t)0x00000000U) /*!< BaudRate control equal to fPCLK/2 */ +#define LL_SPI_BAUDRATEPRESCALER_DIV4 (SPI_CR1_BR_0) /*!< BaudRate control equal to fPCLK/4 */ +#define LL_SPI_BAUDRATEPRESCALER_DIV8 (SPI_CR1_BR_1) /*!< BaudRate control equal to fPCLK/8 */ +#define LL_SPI_BAUDRATEPRESCALER_DIV16 (SPI_CR1_BR_1 | SPI_CR1_BR_0) /*!< BaudRate control equal to fPCLK/16 */ +#define LL_SPI_BAUDRATEPRESCALER_DIV32 (SPI_CR1_BR_2) /*!< BaudRate control equal to fPCLK/32 */ +#define LL_SPI_BAUDRATEPRESCALER_DIV64 (SPI_CR1_BR_2 | SPI_CR1_BR_0) /*!< BaudRate control equal to fPCLK/64 */ +#define LL_SPI_BAUDRATEPRESCALER_DIV128 (SPI_CR1_BR_2 | SPI_CR1_BR_1) /*!< BaudRate control equal to fPCLK/128 */ +#define LL_SPI_BAUDRATEPRESCALER_DIV256 (SPI_CR1_BR_2 | SPI_CR1_BR_1 | SPI_CR1_BR_0) /*!< BaudRate control equal to fPCLK/256 */ +/** + * @} + */ + +/** @defgroup SPI_LL_EC_BIT_ORDER Transmission Bit Order + * @{ + */ +#define LL_SPI_LSB_FIRST (SPI_CR1_LSBFIRST) /*!< Data is transmitted/received with the LSB first */ +#define LL_SPI_MSB_FIRST ((uint32_t)0x00000000U) /*!< Data is transmitted/received with the MSB first */ +/** + * @} + */ + +/** @defgroup SPI_LL_EC_TRANSFER_MODE Transfer Mode + * @{ + */ +#define LL_SPI_FULL_DUPLEX ((uint32_t)0x00000000U) /*!< Full-Duplex mode. Rx and Tx transfer on 2 lines */ +#define LL_SPI_SIMPLEX_RX (SPI_CR1_RXONLY) /*!< Simplex Rx mode. Rx transfer only on 1 line */ +#define LL_SPI_HALF_DUPLEX_RX (SPI_CR1_BIDIMODE) /*!< Half-Duplex Rx mode. Rx transfer on 1 line */ +#define LL_SPI_HALF_DUPLEX_TX (SPI_CR1_BIDIMODE | SPI_CR1_BIDIOE) /*!< Half-Duplex Tx mode. Tx transfer on 1 line */ +/** + * @} + */ + +/** @defgroup SPI_LL_EC_NSS_MODE Slave Select Pin Mode + * @{ + */ +#define LL_SPI_NSS_SOFT (SPI_CR1_SSM) /*!< NSS managed internally. NSS pin not used and free */ +#define LL_SPI_NSS_HARD_INPUT ((uint32_t)0x00000000U) /*!< NSS pin used in Input. Only used in Master mode */ +#define LL_SPI_NSS_HARD_OUTPUT (((uint32_t)SPI_CR2_SSOE << 16U)) /*!< NSS pin used in Output. Only used in Slave mode as chip select */ +/** + * @} + */ + +/** @defgroup SPI_LL_EC_DATAWIDTH Datawidth + * @{ + */ +#define LL_SPI_DATAWIDTH_8BIT ((uint32_t)0x00000000U) /*!< Data length for SPI transfer: 8 bits */ +#define LL_SPI_DATAWIDTH_16BIT (SPI_CR1_DFF) /*!< Data length for SPI transfer: 16 bits */ +/** + * @} + */ +#if defined(USE_FULL_LL_DRIVER) + +/** @defgroup SPI_LL_EC_CRC_CALCULATION CRC Calculation + * @{ + */ +#define LL_SPI_CRCCALCULATION_DISABLE ((uint32_t)0x00000000U) /*!< CRC calculation disabled */ +#define LL_SPI_CRCCALCULATION_ENABLE (SPI_CR1_CRCEN) /*!< CRC calculation enabled */ +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup SPI_LL_Exported_Macros SPI Exported Macros + * @{ + */ + +/** @defgroup SPI_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in SPI register + * @param __INSTANCE__ SPI Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_SPI_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in SPI register + * @param __INSTANCE__ SPI Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_SPI_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup SPI_LL_Exported_Functions SPI Exported Functions + * @{ + */ + +/** @defgroup SPI_LL_EF_Configuration Configuration + * @{ + */ + +/** + * @brief Enable SPI peripheral + * @rmtoll CR1 SPE LL_SPI_Enable + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_Enable(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->CR1, SPI_CR1_SPE); +} + +/** + * @brief Disable SPI peripheral + * @note When disabling the SPI, follow the procedure described in the Reference Manual. + * @rmtoll CR1 SPE LL_SPI_Disable + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_Disable(SPI_TypeDef *SPIx) +{ + CLEAR_BIT(SPIx->CR1, SPI_CR1_SPE); +} + +/** + * @brief Check if SPI peripheral is enabled + * @rmtoll CR1 SPE LL_SPI_IsEnabled + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsEnabled(SPI_TypeDef *SPIx) +{ + return (READ_BIT(SPIx->CR1, SPI_CR1_SPE) == (SPI_CR1_SPE)); +} + +/** + * @brief Set SPI operation mode to Master or Slave + * @note This bit should not be changed when communication is ongoing. + * @rmtoll CR1 MSTR LL_SPI_SetMode\n + * CR1 SSI LL_SPI_SetMode + * @param SPIx SPI Instance + * @param Mode This parameter can be one of the following values: + * @arg @ref LL_SPI_MODE_MASTER + * @arg @ref LL_SPI_MODE_SLAVE + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetMode(SPI_TypeDef *SPIx, uint32_t Mode) +{ + MODIFY_REG(SPIx->CR1, SPI_CR1_MSTR | SPI_CR1_SSI, Mode); +} + +/** + * @brief Get SPI operation mode (Master or Slave) + * @rmtoll CR1 MSTR LL_SPI_GetMode\n + * CR1 SSI LL_SPI_GetMode + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_MODE_MASTER + * @arg @ref LL_SPI_MODE_SLAVE + */ +__STATIC_INLINE uint32_t LL_SPI_GetMode(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->CR1, SPI_CR1_MSTR | SPI_CR1_SSI)); +} + +#if defined (SPI_CR2_FRF) +/** + * @brief Set serial protocol used + * @note This bit should be written only when SPI is disabled (SPE = 0) for correct operation. + * @rmtoll CR2 FRF LL_SPI_SetStandard + * @param SPIx SPI Instance + * @param Standard This parameter can be one of the following values: + * @arg @ref LL_SPI_PROTOCOL_MOTOROLA + * @arg @ref LL_SPI_PROTOCOL_TI + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetStandard(SPI_TypeDef *SPIx, uint32_t Standard) +{ + MODIFY_REG(SPIx->CR2, SPI_CR2_FRF, Standard); +} + +/** + * @brief Get serial protocol used + * @rmtoll CR2 FRF LL_SPI_GetStandard + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_PROTOCOL_MOTOROLA + * @arg @ref LL_SPI_PROTOCOL_TI + */ +__STATIC_INLINE uint32_t LL_SPI_GetStandard(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->CR2, SPI_CR2_FRF)); +} +#endif /* SPI_CR2_FRF */ + +/** + * @brief Set clock phase + * @note This bit should not be changed when communication is ongoing. + * This bit is not used in SPI TI mode. + * @rmtoll CR1 CPHA LL_SPI_SetClockPhase + * @param SPIx SPI Instance + * @param ClockPhase This parameter can be one of the following values: + * @arg @ref LL_SPI_PHASE_1EDGE + * @arg @ref LL_SPI_PHASE_2EDGE + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetClockPhase(SPI_TypeDef *SPIx, uint32_t ClockPhase) +{ + MODIFY_REG(SPIx->CR1, SPI_CR1_CPHA, ClockPhase); +} + +/** + * @brief Get clock phase + * @rmtoll CR1 CPHA LL_SPI_GetClockPhase + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_PHASE_1EDGE + * @arg @ref LL_SPI_PHASE_2EDGE + */ +__STATIC_INLINE uint32_t LL_SPI_GetClockPhase(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->CR1, SPI_CR1_CPHA)); +} + +/** + * @brief Set clock polarity + * @note This bit should not be changed when communication is ongoing. + * This bit is not used in SPI TI mode. + * @rmtoll CR1 CPOL LL_SPI_SetClockPolarity + * @param SPIx SPI Instance + * @param ClockPolarity This parameter can be one of the following values: + * @arg @ref LL_SPI_POLARITY_LOW + * @arg @ref LL_SPI_POLARITY_HIGH + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetClockPolarity(SPI_TypeDef *SPIx, uint32_t ClockPolarity) +{ + MODIFY_REG(SPIx->CR1, SPI_CR1_CPOL, ClockPolarity); +} + +/** + * @brief Get clock polarity + * @rmtoll CR1 CPOL LL_SPI_GetClockPolarity + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_POLARITY_LOW + * @arg @ref LL_SPI_POLARITY_HIGH + */ +__STATIC_INLINE uint32_t LL_SPI_GetClockPolarity(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->CR1, SPI_CR1_CPOL)); +} + +/** + * @brief Set baud rate prescaler + * @note These bits should not be changed when communication is ongoing. SPI BaudRate = fPCLK/Prescaler. + * @rmtoll CR1 BR LL_SPI_SetBaudRatePrescaler + * @param SPIx SPI Instance + * @param BaudRate This parameter can be one of the following values: + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV2 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV4 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV8 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV16 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV32 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV64 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV128 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV256 + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetBaudRatePrescaler(SPI_TypeDef *SPIx, uint32_t BaudRate) +{ + MODIFY_REG(SPIx->CR1, SPI_CR1_BR, BaudRate); +} + +/** + * @brief Get baud rate prescaler + * @rmtoll CR1 BR LL_SPI_GetBaudRatePrescaler + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV2 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV4 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV8 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV16 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV32 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV64 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV128 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV256 + */ +__STATIC_INLINE uint32_t LL_SPI_GetBaudRatePrescaler(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->CR1, SPI_CR1_BR)); +} + +/** + * @brief Set transfer bit order + * @note This bit should not be changed when communication is ongoing. This bit is not used in SPI TI mode. + * @rmtoll CR1 LSBFIRST LL_SPI_SetTransferBitOrder + * @param SPIx SPI Instance + * @param BitOrder This parameter can be one of the following values: + * @arg @ref LL_SPI_LSB_FIRST + * @arg @ref LL_SPI_MSB_FIRST + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetTransferBitOrder(SPI_TypeDef *SPIx, uint32_t BitOrder) +{ + MODIFY_REG(SPIx->CR1, SPI_CR1_LSBFIRST, BitOrder); +} + +/** + * @brief Get transfer bit order + * @rmtoll CR1 LSBFIRST LL_SPI_GetTransferBitOrder + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_LSB_FIRST + * @arg @ref LL_SPI_MSB_FIRST + */ +__STATIC_INLINE uint32_t LL_SPI_GetTransferBitOrder(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->CR1, SPI_CR1_LSBFIRST)); +} + +/** + * @brief Set transfer direction mode + * @note For Half-Duplex mode, Rx Direction is set by default. + * In master mode, the MOSI pin is used and in slave mode, the MISO pin is used for Half-Duplex. + * @rmtoll CR1 RXONLY LL_SPI_SetTransferDirection\n + * CR1 BIDIMODE LL_SPI_SetTransferDirection\n + * CR1 BIDIOE LL_SPI_SetTransferDirection + * @param SPIx SPI Instance + * @param TransferDirection This parameter can be one of the following values: + * @arg @ref LL_SPI_FULL_DUPLEX + * @arg @ref LL_SPI_SIMPLEX_RX + * @arg @ref LL_SPI_HALF_DUPLEX_RX + * @arg @ref LL_SPI_HALF_DUPLEX_TX + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetTransferDirection(SPI_TypeDef *SPIx, uint32_t TransferDirection) +{ + MODIFY_REG(SPIx->CR1, SPI_CR1_RXONLY | SPI_CR1_BIDIMODE | SPI_CR1_BIDIOE, TransferDirection); +} + +/** + * @brief Get transfer direction mode + * @rmtoll CR1 RXONLY LL_SPI_GetTransferDirection\n + * CR1 BIDIMODE LL_SPI_GetTransferDirection\n + * CR1 BIDIOE LL_SPI_GetTransferDirection + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_FULL_DUPLEX + * @arg @ref LL_SPI_SIMPLEX_RX + * @arg @ref LL_SPI_HALF_DUPLEX_RX + * @arg @ref LL_SPI_HALF_DUPLEX_TX + */ +__STATIC_INLINE uint32_t LL_SPI_GetTransferDirection(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->CR1, SPI_CR1_RXONLY | SPI_CR1_BIDIMODE | SPI_CR1_BIDIOE)); +} + +/** + * @brief Set frame data width + * @rmtoll CR1 DFF LL_SPI_SetDataWidth + * @param SPIx SPI Instance + * @param DataWidth This parameter can be one of the following values: + * @arg @ref LL_SPI_DATAWIDTH_8BIT + * @arg @ref LL_SPI_DATAWIDTH_16BIT + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetDataWidth(SPI_TypeDef *SPIx, uint32_t DataWidth) +{ + MODIFY_REG(SPIx->CR1, SPI_CR1_DFF, DataWidth); +} + +/** + * @brief Get frame data width + * @rmtoll CR1 DFF LL_SPI_GetDataWidth + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_DATAWIDTH_8BIT + * @arg @ref LL_SPI_DATAWIDTH_16BIT + */ +__STATIC_INLINE uint32_t LL_SPI_GetDataWidth(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->CR1, SPI_CR1_DFF)); +} + +/** + * @} + */ + +/** @defgroup SPI_LL_EF_CRC_Management CRC Management + * @{ + */ + +/** + * @brief Enable CRC + * @note This bit should be written only when SPI is disabled (SPE = 0) for correct operation. + * @rmtoll CR1 CRCEN LL_SPI_EnableCRC + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_EnableCRC(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->CR1, SPI_CR1_CRCEN); +} + +/** + * @brief Disable CRC + * @note This bit should be written only when SPI is disabled (SPE = 0) for correct operation. + * @rmtoll CR1 CRCEN LL_SPI_DisableCRC + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_DisableCRC(SPI_TypeDef *SPIx) +{ + CLEAR_BIT(SPIx->CR1, SPI_CR1_CRCEN); +} + +/** + * @brief Check if CRC is enabled + * @note This bit should be written only when SPI is disabled (SPE = 0) for correct operation. + * @rmtoll CR1 CRCEN LL_SPI_IsEnabledCRC + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsEnabledCRC(SPI_TypeDef *SPIx) +{ + return (READ_BIT(SPIx->CR1, SPI_CR1_CRCEN) == (SPI_CR1_CRCEN)); +} + +/** + * @brief Set CRCNext to transfer CRC on the line + * @note This bit has to be written as soon as the last data is written in the SPIx_DR register. + * @rmtoll CR1 CRCNEXT LL_SPI_SetCRCNext + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetCRCNext(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->CR1, SPI_CR1_CRCNEXT); +} + +/** + * @brief Set polynomial for CRC calculation + * @rmtoll CRCPR CRCPOLY LL_SPI_SetCRCPolynomial + * @param SPIx SPI Instance + * @param CRCPoly This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFFFF + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetCRCPolynomial(SPI_TypeDef *SPIx, uint32_t CRCPoly) +{ + WRITE_REG(SPIx->CRCPR, (uint16_t)CRCPoly); +} + +/** + * @brief Get polynomial for CRC calculation + * @rmtoll CRCPR CRCPOLY LL_SPI_GetCRCPolynomial + * @param SPIx SPI Instance + * @retval Returned value is a number between Min_Data = 0x00 and Max_Data = 0xFFFF + */ +__STATIC_INLINE uint32_t LL_SPI_GetCRCPolynomial(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_REG(SPIx->CRCPR)); +} + +/** + * @brief Get Rx CRC + * @rmtoll RXCRCR RXCRC LL_SPI_GetRxCRC + * @param SPIx SPI Instance + * @retval Returned value is a number between Min_Data = 0x00 and Max_Data = 0xFFFF + */ +__STATIC_INLINE uint32_t LL_SPI_GetRxCRC(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_REG(SPIx->RXCRCR)); +} + +/** + * @brief Get Tx CRC + * @rmtoll TXCRCR TXCRC LL_SPI_GetTxCRC + * @param SPIx SPI Instance + * @retval Returned value is a number between Min_Data = 0x00 and Max_Data = 0xFFFF + */ +__STATIC_INLINE uint32_t LL_SPI_GetTxCRC(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_REG(SPIx->TXCRCR)); +} + +/** + * @} + */ + +/** @defgroup SPI_LL_EF_NSS_Management Slave Select Pin Management + * @{ + */ + +/** + * @brief Set NSS mode + * @note LL_SPI_NSS_SOFT Mode is not used in SPI TI mode. + * @rmtoll CR1 SSM LL_SPI_SetNSSMode\n + * @rmtoll CR2 SSOE LL_SPI_SetNSSMode + * @param SPIx SPI Instance + * @param NSS This parameter can be one of the following values: + * @arg @ref LL_SPI_NSS_SOFT + * @arg @ref LL_SPI_NSS_HARD_INPUT + * @arg @ref LL_SPI_NSS_HARD_OUTPUT + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetNSSMode(SPI_TypeDef *SPIx, uint32_t NSS) +{ + MODIFY_REG(SPIx->CR1, SPI_CR1_SSM, NSS); + MODIFY_REG(SPIx->CR2, SPI_CR2_SSOE, ((uint32_t)(NSS >> 16U))); +} + +/** + * @brief Get NSS mode + * @rmtoll CR1 SSM LL_SPI_GetNSSMode\n + * @rmtoll CR2 SSOE LL_SPI_GetNSSMode + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_NSS_SOFT + * @arg @ref LL_SPI_NSS_HARD_INPUT + * @arg @ref LL_SPI_NSS_HARD_OUTPUT + */ +__STATIC_INLINE uint32_t LL_SPI_GetNSSMode(SPI_TypeDef *SPIx) +{ + register uint32_t Ssm = (READ_BIT(SPIx->CR1, SPI_CR1_SSM)); + register uint32_t Ssoe = (READ_BIT(SPIx->CR2, SPI_CR2_SSOE) << 16U); + return (Ssm | Ssoe); +} + +/** + * @} + */ + +/** @defgroup SPI_LL_EF_FLAG_Management FLAG Management + * @{ + */ + +/** + * @brief Check if Rx buffer is not empty + * @rmtoll SR RXNE LL_SPI_IsActiveFlag_RXNE + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsActiveFlag_RXNE(SPI_TypeDef *SPIx) +{ + return (READ_BIT(SPIx->SR, SPI_SR_RXNE) == (SPI_SR_RXNE)); +} + +/** + * @brief Check if Tx buffer is empty + * @rmtoll SR TXE LL_SPI_IsActiveFlag_TXE + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsActiveFlag_TXE(SPI_TypeDef *SPIx) +{ + return (READ_BIT(SPIx->SR, SPI_SR_TXE) == (SPI_SR_TXE)); +} + +/** + * @brief Get CRC error flag + * @rmtoll SR CRCERR LL_SPI_IsActiveFlag_CRCERR + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsActiveFlag_CRCERR(SPI_TypeDef *SPIx) +{ + return (READ_BIT(SPIx->SR, SPI_SR_CRCERR) == (SPI_SR_CRCERR)); +} + +/** + * @brief Get mode fault error flag + * @rmtoll SR MODF LL_SPI_IsActiveFlag_MODF + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsActiveFlag_MODF(SPI_TypeDef *SPIx) +{ + return (READ_BIT(SPIx->SR, SPI_SR_MODF) == (SPI_SR_MODF)); +} + +/** + * @brief Get overrun error flag + * @rmtoll SR OVR LL_SPI_IsActiveFlag_OVR + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsActiveFlag_OVR(SPI_TypeDef *SPIx) +{ + return (READ_BIT(SPIx->SR, SPI_SR_OVR) == (SPI_SR_OVR)); +} + +/** + * @brief Get busy flag + * @note The BSY flag is cleared under any one of the following conditions: + * -When the SPI is correctly disabled + * -When a fault is detected in Master mode (MODF bit set to 1) + * -In Master mode, when it finishes a data transmission and no new data is ready to be + * sent + * -In Slave mode, when the BSY flag is set to '0' for at least one SPI clock cycle between + * each data transfer. + * @rmtoll SR BSY LL_SPI_IsActiveFlag_BSY + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsActiveFlag_BSY(SPI_TypeDef *SPIx) +{ + return (READ_BIT(SPIx->SR, SPI_SR_BSY) == (SPI_SR_BSY)); +} + +/** + * @brief Get frame format error flag + * @rmtoll SR FRE LL_SPI_IsActiveFlag_FRE + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsActiveFlag_FRE(SPI_TypeDef *SPIx) +{ + return (READ_BIT(SPIx->SR, SPI_SR_FRE) == (SPI_SR_FRE)); +} + +/** + * @brief Clear CRC error flag + * @rmtoll SR CRCERR LL_SPI_ClearFlag_CRCERR + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_ClearFlag_CRCERR(SPI_TypeDef *SPIx) +{ + CLEAR_BIT(SPIx->SR, SPI_SR_CRCERR); +} + +/** + * @brief Clear mode fault error flag + * @note Clearing this flag is done by a read access to the SPIx_SR + * register followed by a write access to the SPIx_CR1 register + * @rmtoll SR MODF LL_SPI_ClearFlag_MODF + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_ClearFlag_MODF(SPI_TypeDef *SPIx) +{ + __IO uint32_t tmpreg; + tmpreg = SPIx->SR; + (void) tmpreg; + tmpreg = CLEAR_BIT(SPIx->CR1, SPI_CR1_SPE); + (void) tmpreg; +} + +/** + * @brief Clear overrun error flag + * @note Clearing this flag is done by a read access to the SPIx_DR + * register followed by a read access to the SPIx_SR register + * @rmtoll SR OVR LL_SPI_ClearFlag_OVR + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_ClearFlag_OVR(SPI_TypeDef *SPIx) +{ + __IO uint32_t tmpreg; + tmpreg = SPIx->DR; + (void) tmpreg; + tmpreg = SPIx->SR; + (void) tmpreg; +} + +/** + * @brief Clear frame format error flag + * @note Clearing this flag is done by reading SPIx_SR register + * @rmtoll SR FRE LL_SPI_ClearFlag_FRE + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_ClearFlag_FRE(SPI_TypeDef *SPIx) +{ + __IO uint32_t tmpreg; + tmpreg = SPIx->SR; + (void) tmpreg; +} + +/** + * @} + */ + +/** @defgroup SPI_LL_EF_IT_Management Interrupt Management + * @{ + */ + +/** + * @brief Enable error interrupt + * @note This bit controls the generation of an interrupt when an error condition occurs (CRCERR, OVR, MODF in SPI mode, FRE at TI mode). + * @rmtoll CR2 ERRIE LL_SPI_EnableIT_ERR + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_EnableIT_ERR(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->CR2, SPI_CR2_ERRIE); +} + +/** + * @brief Enable Rx buffer not empty interrupt + * @rmtoll CR2 RXNEIE LL_SPI_EnableIT_RXNE + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_EnableIT_RXNE(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->CR2, SPI_CR2_RXNEIE); +} + +/** + * @brief Enable Tx buffer empty interrupt + * @rmtoll CR2 TXEIE LL_SPI_EnableIT_TXE + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_EnableIT_TXE(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->CR2, SPI_CR2_TXEIE); +} + +/** + * @brief Disable error interrupt + * @note This bit controls the generation of an interrupt when an error condition occurs (CRCERR, OVR, MODF in SPI mode, FRE at TI mode). + * @rmtoll CR2 ERRIE LL_SPI_DisableIT_ERR + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_DisableIT_ERR(SPI_TypeDef *SPIx) +{ + CLEAR_BIT(SPIx->CR2, SPI_CR2_ERRIE); +} + +/** + * @brief Disable Rx buffer not empty interrupt + * @rmtoll CR2 RXNEIE LL_SPI_DisableIT_RXNE + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_DisableIT_RXNE(SPI_TypeDef *SPIx) +{ + CLEAR_BIT(SPIx->CR2, SPI_CR2_RXNEIE); +} + +/** + * @brief Disable Tx buffer empty interrupt + * @rmtoll CR2 TXEIE LL_SPI_DisableIT_TXE + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_DisableIT_TXE(SPI_TypeDef *SPIx) +{ + CLEAR_BIT(SPIx->CR2, SPI_CR2_TXEIE); +} + +/** + * @brief Check if error interrupt is enabled + * @rmtoll CR2 ERRIE LL_SPI_IsEnabledIT_ERR + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsEnabledIT_ERR(SPI_TypeDef *SPIx) +{ + return (READ_BIT(SPIx->CR2, SPI_CR2_ERRIE) == (SPI_CR2_ERRIE)); +} + +/** + * @brief Check if Rx buffer not empty interrupt is enabled + * @rmtoll CR2 RXNEIE LL_SPI_IsEnabledIT_RXNE + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsEnabledIT_RXNE(SPI_TypeDef *SPIx) +{ + return (READ_BIT(SPIx->CR2, SPI_CR2_RXNEIE) == (SPI_CR2_RXNEIE)); +} + +/** + * @brief Check if Tx buffer empty interrupt + * @rmtoll CR2 TXEIE LL_SPI_IsEnabledIT_TXE + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsEnabledIT_TXE(SPI_TypeDef *SPIx) +{ + return (READ_BIT(SPIx->CR2, SPI_CR2_TXEIE) == (SPI_CR2_TXEIE)); +} + +/** + * @} + */ + +/** @defgroup SPI_LL_EF_DMA_Management DMA Management + * @{ + */ + +/** + * @brief Enable DMA Rx + * @rmtoll CR2 RXDMAEN LL_SPI_EnableDMAReq_RX + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_EnableDMAReq_RX(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->CR2, SPI_CR2_RXDMAEN); +} + +/** + * @brief Disable DMA Rx + * @rmtoll CR2 RXDMAEN LL_SPI_DisableDMAReq_RX + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_DisableDMAReq_RX(SPI_TypeDef *SPIx) +{ + CLEAR_BIT(SPIx->CR2, SPI_CR2_RXDMAEN); +} + +/** + * @brief Check if DMA Rx is enabled + * @rmtoll CR2 RXDMAEN LL_SPI_IsEnabledDMAReq_RX + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsEnabledDMAReq_RX(SPI_TypeDef *SPIx) +{ + return (READ_BIT(SPIx->CR2, SPI_CR2_RXDMAEN) == (SPI_CR2_RXDMAEN)); +} + +/** + * @brief Enable DMA Tx + * @rmtoll CR2 TXDMAEN LL_SPI_EnableDMAReq_TX + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_EnableDMAReq_TX(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->CR2, SPI_CR2_TXDMAEN); +} + +/** + * @brief Disable DMA Tx + * @rmtoll CR2 TXDMAEN LL_SPI_DisableDMAReq_TX + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_DisableDMAReq_TX(SPI_TypeDef *SPIx) +{ + CLEAR_BIT(SPIx->CR2, SPI_CR2_TXDMAEN); +} + +/** + * @brief Check if DMA Tx is enabled + * @rmtoll CR2 TXDMAEN LL_SPI_IsEnabledDMAReq_TX + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsEnabledDMAReq_TX(SPI_TypeDef *SPIx) +{ + return (READ_BIT(SPIx->CR2, SPI_CR2_TXDMAEN) == (SPI_CR2_TXDMAEN)); +} + +/** + * @brief Get the data register address used for DMA transfer + * @rmtoll DR DR LL_SPI_DMA_GetRegAddr + * @param SPIx SPI Instance + * @retval Address of data register + */ +__STATIC_INLINE uint32_t LL_SPI_DMA_GetRegAddr(SPI_TypeDef *SPIx) +{ + return (uint32_t) & (SPIx->DR); +} + +/** + * @} + */ + +/** @defgroup SPI_LL_EF_DATA_Management DATA Management + * @{ + */ + +/** + * @brief Read 8-Bits in the data register + * @rmtoll DR DR LL_SPI_ReceiveData8 + * @param SPIx SPI Instance + * @retval RxData Value between Min_Data=0x00 and Max_Data=0xFF + */ +__STATIC_INLINE uint8_t LL_SPI_ReceiveData8(SPI_TypeDef *SPIx) +{ + return (uint8_t)(READ_REG(SPIx->DR)); +} + +/** + * @brief Read 16-Bits in the data register + * @rmtoll DR DR LL_SPI_ReceiveData16 + * @param SPIx SPI Instance + * @retval RxData Value between Min_Data=0x00 and Max_Data=0xFFFF + */ +__STATIC_INLINE uint16_t LL_SPI_ReceiveData16(SPI_TypeDef *SPIx) +{ + return (uint16_t)(READ_REG(SPIx->DR)); +} + +/** + * @brief Write 8-Bits in the data register + * @rmtoll DR DR LL_SPI_TransmitData8 + * @param SPIx SPI Instance + * @param TxData Value between Min_Data=0x00 and Max_Data=0xFF + * @retval None + */ +__STATIC_INLINE void LL_SPI_TransmitData8(SPI_TypeDef *SPIx, uint8_t TxData) +{ + *((__IO uint8_t *)&SPIx->DR) = TxData; +} + +/** + * @brief Write 16-Bits in the data register + * @rmtoll DR DR LL_SPI_TransmitData16 + * @param SPIx SPI Instance + * @param TxData Value between Min_Data=0x00 and Max_Data=0xFFFF + * @retval None + */ +__STATIC_INLINE void LL_SPI_TransmitData16(SPI_TypeDef *SPIx, uint16_t TxData) +{ + *((__IO uint16_t *)&SPIx->DR) = TxData; +} + +/** + * @} + */ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup SPI_LL_EF_Init Initialization and de-initialization functions + * @{ + */ + +ErrorStatus LL_SPI_DeInit(SPI_TypeDef *SPIx); +ErrorStatus LL_SPI_Init(SPI_TypeDef *SPIx, LL_SPI_InitTypeDef *SPI_InitStruct); +void LL_SPI_StructInit(LL_SPI_InitTypeDef *SPI_InitStruct); + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ +/** + * @} + */ + +/** + * @} + */ + +#if defined(SPI_I2S_SUPPORT) +/** @defgroup I2S_LL I2S + * @{ + */ + +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup I2S_LL_ES_INIT I2S Exported Init structure + * @{ + */ + +/** + * @brief I2S Init structure definition + */ + +typedef struct +{ + uint32_t Mode; /*!< Specifies the I2S operating mode. + This parameter can be a value of @ref I2S_LL_EC_MODE + + This feature can be modified afterwards using unitary function @ref LL_I2S_SetTransferMode().*/ + + uint32_t Standard; /*!< Specifies the standard used for the I2S communication. + This parameter can be a value of @ref I2S_LL_EC_STANDARD + + This feature can be modified afterwards using unitary function @ref LL_I2S_SetStandard().*/ + + + uint32_t DataFormat; /*!< Specifies the data format for the I2S communication. + This parameter can be a value of @ref I2S_LL_EC_DATA_FORMAT + + This feature can be modified afterwards using unitary function @ref LL_I2S_SetDataFormat().*/ + + + uint32_t MCLKOutput; /*!< Specifies whether the I2S MCLK output is enabled or not. + This parameter can be a value of @ref I2S_LL_EC_MCLK_OUTPUT + + This feature can be modified afterwards using unitary functions @ref LL_I2S_EnableMasterClock() or @ref LL_I2S_DisableMasterClock.*/ + + + uint32_t AudioFreq; /*!< Specifies the frequency selected for the I2S communication. + This parameter can be a value of @ref I2S_LL_EC_AUDIO_FREQ + + Audio Frequency can be modified afterwards using Reference manual formulas to calculate Prescaler Linear, Parity + and unitary functions @ref LL_I2S_SetPrescalerLinear() and @ref LL_I2S_SetPrescalerParity() to set it.*/ + + + uint32_t ClockPolarity; /*!< Specifies the idle state of the I2S clock. + This parameter can be a value of @ref I2S_LL_EC_POLARITY + + This feature can be modified afterwards using unitary function @ref LL_I2S_SetClockPolarity().*/ + +} LL_I2S_InitTypeDef; + +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup I2S_LL_Exported_Constants I2S Exported Constants + * @{ + */ + +/** @defgroup I2S_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_I2S_ReadReg function + * @{ + */ +#define LL_I2S_SR_RXNE LL_SPI_SR_RXNE /*!< Rx buffer not empty flag */ +#define LL_I2S_SR_TXE LL_SPI_SR_TXE /*!< Tx buffer empty flag */ +#define LL_I2S_SR_BSY LL_SPI_SR_BSY /*!< Busy flag */ +#define LL_I2S_SR_UDR LL_SPI_SR_UDR /*!< Underrun flag */ +#define LL_I2S_SR_OVR LL_SPI_SR_OVR /*!< Overrun flag */ +#define LL_I2S_SR_FRE LL_SPI_SR_FRE /*!< TI mode frame format error flag */ +/** + * @} + */ + +/** @defgroup SPI_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_SPI_ReadReg and LL_SPI_WriteReg functions + * @{ + */ +#define LL_I2S_CR2_RXNEIE LL_SPI_CR2_RXNEIE /*!< Rx buffer not empty interrupt enable */ +#define LL_I2S_CR2_TXEIE LL_SPI_CR2_TXEIE /*!< Tx buffer empty interrupt enable */ +#define LL_I2S_CR2_ERRIE LL_SPI_CR2_ERRIE /*!< Error interrupt enable */ +/** + * @} + */ + +/** @defgroup I2S_LL_EC_DATA_FORMAT Data format + * @{ + */ +#define LL_I2S_DATAFORMAT_16B ((uint32_t)0x00000000U) /*!< Data length 16 bits, Channel lenght 16bit */ +#define LL_I2S_DATAFORMAT_16B_EXTENDED (SPI_I2SCFGR_CHLEN) /*!< Data length 16 bits, Channel lenght 32bit */ +#define LL_I2S_DATAFORMAT_24B (SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN_0) /*!< Data length 24 bits, Channel lenght 32bit */ +#define LL_I2S_DATAFORMAT_32B (SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN_1) /*!< Data length 16 bits, Channel lenght 32bit */ +/** + * @} + */ + +/** @defgroup I2S_LL_EC_POLARITY Clock Polarity + * @{ + */ +#define LL_I2S_POLARITY_LOW ((uint32_t)0x00000000U) /*!< Clock steady state is low level */ +#define LL_I2S_POLARITY_HIGH (SPI_I2SCFGR_CKPOL) /*!< Clock steady state is high level */ +/** + * @} + */ + +/** @defgroup I2S_LL_EC_STANDARD I2s Standard + * @{ + */ +#define LL_I2S_STANDARD_PHILIPS ((uint32_t)0x00000000U) /*!< I2S standard philips */ +#define LL_I2S_STANDARD_MSB (SPI_I2SCFGR_I2SSTD_0) /*!< MSB justified standard (left justified) */ +#define LL_I2S_STANDARD_LSB (SPI_I2SCFGR_I2SSTD_1) /*!< LSB justified standard (right justified) */ +#define LL_I2S_STANDARD_PCM_SHORT (SPI_I2SCFGR_I2SSTD_0 | SPI_I2SCFGR_I2SSTD_1) /*!< PCM standard, short frame synchronization */ +#define LL_I2S_STANDARD_PCM_LONG (SPI_I2SCFGR_I2SSTD_0 | SPI_I2SCFGR_I2SSTD_1 | SPI_I2SCFGR_PCMSYNC) /*!< PCM standard, long frame synchronization */ +/** + * @} + */ + +/** @defgroup I2S_LL_EC_MODE Operation Mode + * @{ + */ +#define LL_I2S_MODE_SLAVE_TX ((uint32_t)0x00000000U) /*!< Slave Tx configuration */ +#define LL_I2S_MODE_SLAVE_RX (SPI_I2SCFGR_I2SCFG_0) /*!< Slave Rx configuration */ +#define LL_I2S_MODE_MASTER_TX (SPI_I2SCFGR_I2SCFG_1) /*!< Master Tx configuration */ +#define LL_I2S_MODE_MASTER_RX (SPI_I2SCFGR_I2SCFG_0 | SPI_I2SCFGR_I2SCFG_1) /*!< Master Rx configuration */ +/** + * @} + */ + +/** @defgroup I2S_LL_EC_PRESCALER_FACTOR Prescaler Factor + * @{ + */ +#define LL_I2S_PRESCALER_PARITY_EVEN ((uint32_t)0x00000000U) /*!< Odd factor: Real divider value is = I2SDIV * 2 */ +#define LL_I2S_PRESCALER_PARITY_ODD (SPI_I2SPR_ODD >> 8U) /*!< Odd factor: Real divider value is = (I2SDIV * 2)+1 */ +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) + +/** @defgroup I2S_LL_EC_MCLK_OUTPUT MCLK Output + * @{ + */ +#define LL_I2S_MCLK_OUTPUT_DISABLE ((uint32_t)0x00000000U) /*!< Master clock output is disabled */ +#define LL_I2S_MCLK_OUTPUT_ENABLE (SPI_I2SPR_MCKOE) /*!< Master clock output is enabled */ +/** + * @} + */ + +/** @defgroup I2S_LL_EC_AUDIO_FREQ Audio Frequency + * @{ + */ + +#define LL_I2S_AUDIOFREQ_192K ((uint32_t)192000) /*!< Audio Frequency configuration 192000 Hz */ +#define LL_I2S_AUDIOFREQ_96K ((uint32_t) 96000) /*!< Audio Frequency configuration 96000 Hz */ +#define LL_I2S_AUDIOFREQ_48K ((uint32_t) 48000) /*!< Audio Frequency configuration 48000 Hz */ +#define LL_I2S_AUDIOFREQ_44K ((uint32_t) 44100) /*!< Audio Frequency configuration 44100 Hz */ +#define LL_I2S_AUDIOFREQ_32K ((uint32_t) 32000) /*!< Audio Frequency configuration 32000 Hz */ +#define LL_I2S_AUDIOFREQ_22K ((uint32_t) 22050) /*!< Audio Frequency configuration 22050 Hz */ +#define LL_I2S_AUDIOFREQ_16K ((uint32_t) 16000) /*!< Audio Frequency configuration 16000 Hz */ +#define LL_I2S_AUDIOFREQ_11K ((uint32_t) 11025) /*!< Audio Frequency configuration 11025 Hz */ +#define LL_I2S_AUDIOFREQ_8K ((uint32_t) 8000) /*!< Audio Frequency configuration 8000 Hz */ +#define LL_I2S_AUDIOFREQ_DEFAULT ((uint32_t) 2) /*!< Audio Freq not specified. Register I2SDIV = 2 */ +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup I2S_LL_Exported_Macros I2S Exported Macros + * @{ + */ + +/** @defgroup I2S_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in I2S register + * @param __INSTANCE__ I2S Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_I2S_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in I2S register + * @param __INSTANCE__ I2S Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_I2S_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** + * @} + */ + + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup I2S_LL_Exported_Functions I2S Exported Functions + * @{ + */ + +/** @defgroup I2S_LL_EF_Configuration Configuration + * @{ + */ + +/** + * @brief Select I2S mode and Enable I2S peripheral + * @rmtoll I2SCFGR I2SMOD LL_I2S_Enable\n + * I2SCFGR I2SE LL_I2S_Enable + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_Enable(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_I2SMOD | SPI_I2SCFGR_I2SE); +} + +/** + * @brief Disable I2S peripheral + * @rmtoll I2SCFGR I2SE LL_I2S_Disable + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_Disable(SPI_TypeDef *SPIx) +{ + CLEAR_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_I2SMOD | SPI_I2SCFGR_I2SE); +} + +/** + * @brief Check if I2S peripheral is enabled + * @rmtoll I2SCFGR I2SE LL_I2S_IsEnabled + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsEnabled(SPI_TypeDef *SPIx) +{ + return (READ_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_I2SE) == (SPI_I2SCFGR_I2SE)); +} + +/** + * @brief Set I2S Data frame length + * @rmtoll I2SCFGR DATLEN LL_I2S_SetDataFormat\n + * I2SCFGR CHLEN LL_I2S_SetDataFormat + * @param SPIx SPI Instance + * @param DataFormat This parameter can be one of the following values: + * @arg @ref LL_I2S_DATAFORMAT_16B + * @arg @ref LL_I2S_DATAFORMAT_16B_EXTENDED + * @arg @ref LL_I2S_DATAFORMAT_24B + * @arg @ref LL_I2S_DATAFORMAT_32B + * @retval None + */ +__STATIC_INLINE void LL_I2S_SetDataFormat(SPI_TypeDef *SPIx, uint32_t DataFormat) +{ + MODIFY_REG(SPIx->I2SCFGR, SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN, DataFormat); +} + +/** + * @brief Get I2S Data frame length + * @rmtoll I2SCFGR DATLEN LL_I2S_GetDataFormat\n + * I2SCFGR CHLEN LL_I2S_GetDataFormat + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_I2S_DATAFORMAT_16B + * @arg @ref LL_I2S_DATAFORMAT_16B_EXTENDED + * @arg @ref LL_I2S_DATAFORMAT_24B + * @arg @ref LL_I2S_DATAFORMAT_32B + */ +__STATIC_INLINE uint32_t LL_I2S_GetDataFormat(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN)); +} + +/** + * @brief Set I2S clock polarity + * @rmtoll I2SCFGR CKPOL LL_I2S_SetClockPolarity + * @param SPIx SPI Instance + * @param ClockPolarity This parameter can be one of the following values: + * @arg @ref LL_I2S_POLARITY_LOW + * @arg @ref LL_I2S_POLARITY_HIGH + * @retval None + */ +__STATIC_INLINE void LL_I2S_SetClockPolarity(SPI_TypeDef *SPIx, uint32_t ClockPolarity) +{ + SET_BIT(SPIx->I2SCFGR, ClockPolarity); +} + +/** + * @brief Get I2S clock polarity + * @rmtoll I2SCFGR CKPOL LL_I2S_GetClockPolarity + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_I2S_POLARITY_LOW + * @arg @ref LL_I2S_POLARITY_HIGH + */ +__STATIC_INLINE uint32_t LL_I2S_GetClockPolarity(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_CKPOL)); +} + +/** + * @brief Set I2S Standard Protocol + * @rmtoll I2SCFGR I2SSTD LL_I2S_SetStandard\n + * I2SCFGR PCMSYNC LL_I2S_SetStandard + * @param SPIx SPI Instance + * @param Standard This parameter can be one of the following values: + * @arg @ref LL_I2S_STANDARD_PHILIPS + * @arg @ref LL_I2S_STANDARD_MSB + * @arg @ref LL_I2S_STANDARD_LSB + * @arg @ref LL_I2S_STANDARD_PCM_SHORT + * @arg @ref LL_I2S_STANDARD_PCM_LONG + * @retval None + */ +__STATIC_INLINE void LL_I2S_SetStandard(SPI_TypeDef *SPIx, uint32_t Standard) +{ + MODIFY_REG(SPIx->I2SCFGR, SPI_I2SCFGR_I2SSTD | SPI_I2SCFGR_PCMSYNC, Standard); +} + +/** + * @brief Get I2S Standard Protocol + * @rmtoll I2SCFGR I2SSTD LL_I2S_GetStandard\n + * I2SCFGR PCMSYNC LL_I2S_GetStandard + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_I2S_STANDARD_PHILIPS + * @arg @ref LL_I2S_STANDARD_MSB + * @arg @ref LL_I2S_STANDARD_LSB + * @arg @ref LL_I2S_STANDARD_PCM_SHORT + * @arg @ref LL_I2S_STANDARD_PCM_LONG + */ +__STATIC_INLINE uint32_t LL_I2S_GetStandard(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_I2SSTD | SPI_I2SCFGR_PCMSYNC)); +} + +/** + * @brief Set I2S Transfer Mode + * @rmtoll I2SCFGR I2SCFG LL_I2S_SetTransferMode + * @param SPIx SPI Instance + * @param Mode This parameter can be one of the following values: + * @arg @ref LL_I2S_MODE_SLAVE_TX + * @arg @ref LL_I2S_MODE_SLAVE_RX + * @arg @ref LL_I2S_MODE_MASTER_TX + * @arg @ref LL_I2S_MODE_MASTER_RX + * @retval None + */ +__STATIC_INLINE void LL_I2S_SetTransferMode(SPI_TypeDef *SPIx, uint32_t Mode) +{ + MODIFY_REG(SPIx->I2SCFGR, SPI_I2SCFGR_I2SCFG, Mode); +} + +/** + * @brief Get I2S Transfer Mode + * @rmtoll I2SCFGR I2SCFG LL_I2S_GetTransferMode + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_I2S_MODE_SLAVE_TX + * @arg @ref LL_I2S_MODE_SLAVE_RX + * @arg @ref LL_I2S_MODE_MASTER_TX + * @arg @ref LL_I2S_MODE_MASTER_RX + */ +__STATIC_INLINE uint32_t LL_I2S_GetTransferMode(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_I2SCFG)); +} + +/** + * @brief Set I2S linear prescaler + * @rmtoll I2SPR I2SDIV LL_I2S_SetPrescalerLinear + * @param SPIx SPI Instance + * @param PrescalerLinear Value between Min_Data=0x02 and Max_Data=0xFF + * @retval None + */ +__STATIC_INLINE void LL_I2S_SetPrescalerLinear(SPI_TypeDef *SPIx, uint8_t PrescalerLinear) +{ + MODIFY_REG(SPIx->I2SPR, SPI_I2SPR_I2SDIV, PrescalerLinear); +} + +/** + * @brief Get I2S linear prescaler + * @rmtoll I2SPR I2SDIV LL_I2S_GetPrescalerLinear + * @param SPIx SPI Instance + * @retval PrescalerLinear Value between Min_Data=0x02 and Max_Data=0xFF + */ +__STATIC_INLINE uint32_t LL_I2S_GetPrescalerLinear(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->I2SPR, SPI_I2SPR_I2SDIV)); +} + +/** + * @brief Set I2S parity prescaler + * @rmtoll I2SPR ODD LL_I2S_SetPrescalerParity + * @param SPIx SPI Instance + * @param PrescalerParity This parameter can be one of the following values: + * @arg @ref LL_I2S_PRESCALER_PARITY_EVEN + * @arg @ref LL_I2S_PRESCALER_PARITY_ODD + * @retval None + */ +__STATIC_INLINE void LL_I2S_SetPrescalerParity(SPI_TypeDef *SPIx, uint32_t PrescalerParity) +{ + MODIFY_REG(SPIx->I2SPR, SPI_I2SPR_ODD, PrescalerParity << 8U); +} + +/** + * @brief Get I2S parity prescaler + * @rmtoll I2SPR ODD LL_I2S_GetPrescalerParity + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_I2S_PRESCALER_PARITY_EVEN + * @arg @ref LL_I2S_PRESCALER_PARITY_ODD + */ +__STATIC_INLINE uint32_t LL_I2S_GetPrescalerParity(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->I2SPR, SPI_I2SPR_ODD) >> 8U); +} + +/** + * @brief Enable the Master Clock Ouput (Pin MCK) + * @rmtoll I2SPR MCKOE LL_I2S_EnableMasterClock + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_EnableMasterClock(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->I2SPR, SPI_I2SPR_MCKOE); +} + +/** + * @brief Disable the Master Clock Ouput (Pin MCK) + * @rmtoll I2SPR MCKOE LL_I2S_DisableMasterClock + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_DisableMasterClock(SPI_TypeDef *SPIx) +{ + CLEAR_BIT(SPIx->I2SPR, SPI_I2SPR_MCKOE); +} + +/** + * @brief Check if the Master Clock Ouput (Pin MCK) is enabled + * @rmtoll I2SPR MCKOE LL_I2S_IsEnabledMasterClock + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsEnabledMasterClock(SPI_TypeDef *SPIx) +{ + return (READ_BIT(SPIx->I2SPR, SPI_I2SPR_MCKOE) == (SPI_I2SPR_MCKOE)); +} + +/** + * @} + */ + +/** @defgroup I2S_LL_EF_FLAG FLAG Management + * @{ + */ + +/** + * @brief Check if Rx buffer is not empty + * @rmtoll SR RXNE LL_I2S_IsActiveFlag_RXNE + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsActiveFlag_RXNE(SPI_TypeDef *SPIx) +{ + return LL_SPI_IsActiveFlag_RXNE(SPIx); +} + +/** + * @brief Check if Tx buffer is empty + * @rmtoll SR TXE LL_I2S_IsActiveFlag_TXE + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsActiveFlag_TXE(SPI_TypeDef *SPIx) +{ + return LL_SPI_IsActiveFlag_TXE(SPIx); +} + +/** + * @brief Get Busy flag + * @rmtoll SR BSY LL_I2S_IsActiveFlag_BSY + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsActiveFlag_BSY(SPI_TypeDef *SPIx) +{ + return LL_SPI_IsActiveFlag_BSY(SPIx); +} + +/** + * @brief Get Overrun error flag + * @rmtoll SR OVR LL_I2S_IsActiveFlag_OVR + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsActiveFlag_OVR(SPI_TypeDef *SPIx) +{ + return LL_SPI_IsActiveFlag_OVR(SPIx); +} + +/** + * @brief Get Underrun error flag + * @rmtoll SR UDR LL_I2S_IsActiveFlag_UDR + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsActiveFlag_UDR(SPI_TypeDef *SPIx) +{ + return (READ_BIT(SPIx->SR, SPI_SR_UDR) == (SPI_SR_UDR)); +} + +/** + * @brief Get Frame format error flag + * @rmtoll SR FRE LL_I2S_IsActiveFlag_FRE + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsActiveFlag_FRE(SPI_TypeDef *SPIx) +{ + return LL_SPI_IsActiveFlag_FRE(SPIx); +} + +/** + * @brief Get Channel side flag. + * @note 0: Channel Left has to be transmitted or has been received\n + * 1: Channel Right has to be transmitted or has been received\n + * It has no significance in PCM mode. + * @rmtoll SR CHSIDE LL_I2S_IsActiveFlag_CHSIDE + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsActiveFlag_CHSIDE(SPI_TypeDef *SPIx) +{ + return (READ_BIT(SPIx->SR, SPI_SR_CHSIDE) == (SPI_SR_CHSIDE)); +} + +/** + * @brief Clear Overrun error flag + * @rmtoll SR OVR LL_I2S_ClearFlag_OVR + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_ClearFlag_OVR(SPI_TypeDef *SPIx) +{ + LL_SPI_ClearFlag_OVR(SPIx); +} + +/** + * @brief Clear Underrun error flag + * @rmtoll SR UDR LL_I2S_ClearFlag_UDR + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_ClearFlag_UDR(SPI_TypeDef *SPIx) +{ + __IO uint32_t tmpreg; + tmpreg = SPIx->SR; + (void)tmpreg; +} + +/** + * @brief Clear Frame format error flag + * @rmtoll SR FRE LL_I2S_ClearFlag_FRE + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_ClearFlag_FRE(SPI_TypeDef *SPIx) +{ + LL_SPI_ClearFlag_FRE(SPIx); +} + +/** + * @} + */ + +/** @defgroup I2S_LL_EF_IT Interrupt Management + * @{ + */ + +/** + * @brief Enable error IT + * @note This bit controls the generation of an interrupt when an error condition occurs (OVR, UDR and FRE in I2S mode). + * @rmtoll CR2 ERRIE LL_I2S_EnableIT_ERR + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_EnableIT_ERR(SPI_TypeDef *SPIx) +{ + LL_SPI_EnableIT_ERR(SPIx); +} + +/** + * @brief Enable Rx buffer not empty IT + * @rmtoll CR2 RXNEIE LL_I2S_EnableIT_RXNE + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_EnableIT_RXNE(SPI_TypeDef *SPIx) +{ + LL_SPI_EnableIT_RXNE(SPIx); +} + +/** + * @brief Enable Tx buffer empty IT + * @rmtoll CR2 TXEIE LL_I2S_EnableIT_TXE + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_EnableIT_TXE(SPI_TypeDef *SPIx) +{ + LL_SPI_EnableIT_TXE(SPIx); +} + +/** + * @brief Disable Error IT + * @note This bit controls the generation of an interrupt when an error condition occurs (OVR, UDR and FRE in I2S mode). + * @rmtoll CR2 ERRIE LL_I2S_DisableIT_ERR + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_DisableIT_ERR(SPI_TypeDef *SPIx) +{ + LL_SPI_DisableIT_ERR(SPIx); +} + +/** + * @brief Disable Rx buffer not empty IT + * @rmtoll CR2 RXNEIE LL_I2S_DisableIT_RXNE + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_DisableIT_RXNE(SPI_TypeDef *SPIx) +{ + LL_SPI_DisableIT_RXNE(SPIx); +} + +/** + * @brief Disable Tx buffer empty IT + * @rmtoll CR2 TXEIE LL_I2S_DisableIT_TXE + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_DisableIT_TXE(SPI_TypeDef *SPIx) +{ + LL_SPI_DisableIT_TXE(SPIx); +} + +/** + * @brief Check if ERR IT is enabled + * @rmtoll CR2 ERRIE LL_I2S_IsEnabledIT_ERR + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsEnabledIT_ERR(SPI_TypeDef *SPIx) +{ + return LL_SPI_IsEnabledIT_ERR(SPIx); +} + +/** + * @brief Check if RXNE IT is enabled + * @rmtoll CR2 RXNEIE LL_I2S_IsEnabledIT_RXNE + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsEnabledIT_RXNE(SPI_TypeDef *SPIx) +{ + return LL_SPI_IsEnabledIT_RXNE(SPIx); +} + +/** + * @brief Check if TXE IT is enabled + * @rmtoll CR2 TXEIE LL_I2S_IsEnabledIT_TXE + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsEnabledIT_TXE(SPI_TypeDef *SPIx) +{ + return LL_SPI_IsEnabledIT_TXE(SPIx); +} + +/** + * @} + */ + +/** @defgroup I2S_LL_EF_DMA DMA Management + * @{ + */ + +/** + * @brief Enable DMA Rx + * @rmtoll CR2 RXDMAEN LL_I2S_EnableDMAReq_RX + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_EnableDMAReq_RX(SPI_TypeDef *SPIx) +{ + LL_SPI_EnableDMAReq_RX(SPIx); +} + +/** + * @brief Disable DMA Rx + * @rmtoll CR2 RXDMAEN LL_I2S_DisableDMAReq_RX + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_DisableDMAReq_RX(SPI_TypeDef *SPIx) +{ + LL_SPI_DisableDMAReq_RX(SPIx); +} + +/** + * @brief Check if DMA Rx is enabled + * @rmtoll CR2 RXDMAEN LL_I2S_IsEnabledDMAReq_RX + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsEnabledDMAReq_RX(SPI_TypeDef *SPIx) +{ + return LL_SPI_IsEnabledDMAReq_RX(SPIx); +} + +/** + * @brief Enable DMA Tx + * @rmtoll CR2 TXDMAEN LL_I2S_EnableDMAReq_TX + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_EnableDMAReq_TX(SPI_TypeDef *SPIx) +{ + LL_SPI_EnableDMAReq_TX(SPIx); +} + +/** + * @brief Disable DMA Tx + * @rmtoll CR2 TXDMAEN LL_I2S_DisableDMAReq_TX + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_DisableDMAReq_TX(SPI_TypeDef *SPIx) +{ + LL_SPI_DisableDMAReq_TX(SPIx); +} + +/** + * @brief Check if DMA Tx is enabled + * @rmtoll CR2 TXDMAEN LL_I2S_IsEnabledDMAReq_TX + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsEnabledDMAReq_TX(SPI_TypeDef *SPIx) +{ + return LL_SPI_IsEnabledDMAReq_TX(SPIx); +} + +/** + * @} + */ + +/** @defgroup I2S_LL_EF_DATA DATA Management + * @{ + */ + +/** + * @brief Read 16-Bits in data register + * @rmtoll DR DR LL_I2S_ReceiveData16 + * @param SPIx SPI Instance + * @retval RxData Value between Min_Data=0x0000 and Max_Data=0xFFFF + */ +__STATIC_INLINE uint16_t LL_I2S_ReceiveData16(SPI_TypeDef *SPIx) +{ + return LL_SPI_ReceiveData16(SPIx); +} + +/** + * @brief Write 16-Bits in data register + * @rmtoll DR DR LL_I2S_TransmitData16 + * @param SPIx SPI Instance + * @param TxData Value between Min_Data=0x0000 and Max_Data=0xFFFF + * @retval None + */ +__STATIC_INLINE void LL_I2S_TransmitData16(SPI_TypeDef *SPIx, uint16_t TxData) +{ + LL_SPI_TransmitData16(SPIx, TxData); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup I2S_LL_EF_Init Initialization and de-initialization functions + * @{ + */ + +ErrorStatus LL_I2S_DeInit(SPI_TypeDef *SPIx); +ErrorStatus LL_I2S_Init(SPI_TypeDef *SPIx, LL_I2S_InitTypeDef *I2S_InitStruct); +void LL_I2S_StructInit(LL_I2S_InitTypeDef *I2S_InitStruct); +void LL_I2S_ConfigPrescaler(SPI_TypeDef *SPIx, uint32_t PrescalerLinear, uint32_t PrescalerParity); + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ +#endif /* SPI_I2S_SUPPORT */ + +#endif /* defined (SPI1) || defined (SPI2) || defined (SPI3) */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32L1xx_LL_SPI_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_ll_system.h b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_ll_system.h new file mode 100755 index 0000000..cdbb016 --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_ll_system.h @@ -0,0 +1,1975 @@ +/** + ****************************************************************************** + * @file stm32l1xx_ll_system.h + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief Header file of SYSTEM LL module. + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The LL SYSTEM driver contains a set of generic APIs that can be + used by user: + (+) Some of the FLASH features need to be handled in the SYSTEM file. + (+) Access to DBGCMU registers + (+) Access to SYSCFG registers + (+) Access to Routing Interfaces registers + + @endverbatim + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L1xx_LL_SYSTEM_H +#define __STM32L1xx_LL_SYSTEM_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx.h" + +/** @addtogroup STM32L1xx_LL_Driver + * @{ + */ + +#if defined (FLASH) || defined (SYSCFG) || defined (DBGMCU) || defined(RI) + +/** @defgroup SYSTEM_LL SYSTEM + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup SYSTEM_LL_Private_Constants SYSTEM Private Constants + * @{ + */ + +/* Defines used for position in the register */ +#define DBGMCU_REVID_POSITION (uint32_t)POSITION_VAL(DBGMCU_IDCODE_REV_ID) + +/** + * @brief Power-down in Run mode Flash key + */ +#define FLASH_PDKEY1 ((uint32_t)0x04152637U) /*!< Flash power down key1 */ +#define FLASH_PDKEY2 ((uint32_t)0xFAFBFCFDU) /*!< Flash power down key2: used with FLASH_PDKEY1 + to unlock the RUN_PD bit in FLASH_ACR */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup SYSTEM_LL_Exported_Constants SYSTEM Exported Constants + * @{ + */ + +/** @defgroup SYSTEM_LL_EC_REMAP SYSCFG REMAP +* @{ +*/ +#define LL_SYSCFG_REMAP_FLASH (uint32_t)0x00000000U /*MEMRMP, SYSCFG_MEMRMP_MEM_MODE, Memory); +} + +/** + * @brief Get memory mapping at address 0x00000000 + * @rmtoll SYSCFG_MEMRMP MEM_MODE LL_SYSCFG_GetRemapMemory + * @retval Returned value can be one of the following values: + * @arg @ref LL_SYSCFG_REMAP_FLASH + * @arg @ref LL_SYSCFG_REMAP_SYSTEMFLASH + * @arg @ref LL_SYSCFG_REMAP_SRAM + * @arg @ref LL_SYSCFG_REMAP_FMC (*) + * + * (*) value not defined in all devices. + */ +__STATIC_INLINE uint32_t LL_SYSCFG_GetRemapMemory(void) +{ + return (uint32_t)(READ_BIT(SYSCFG->MEMRMP, SYSCFG_MEMRMP_MEM_MODE)); +} + +/** + * @brief Return the boot mode as configured by user. + * @rmtoll SYSCFG_MEMRMP BOOT_MODE LL_SYSCFG_GetBootMode + * @retval Returned value can be one of the following values: + * @arg @ref LL_SYSCFG_BOOTMODE_FLASH + * @arg @ref LL_SYSCFG_BOOTMODE_SYSTEMFLASH + * @arg @ref LL_SYSCFG_BOOTMODE_FSMC (*) + * @arg @ref LL_SYSCFG_BOOTMODE_SRAM + * + * (*) value not defined in all devices. + */ +__STATIC_INLINE uint32_t LL_SYSCFG_GetBootMode(void) +{ + return (uint32_t)(READ_BIT(SYSCFG->MEMRMP, SYSCFG_MEMRMP_BOOT_MODE)); +} + +/** + * @brief Enable internal pull-up on USB DP line. + * @rmtoll SYSCFG_PMC USB_PU LL_SYSCFG_EnableUSBPullUp + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_EnableUSBPullUp(void) +{ + SET_BIT(SYSCFG->PMC, SYSCFG_PMC_USB_PU); +} + +/** + * @brief Disable internal pull-up on USB DP line. + * @rmtoll SYSCFG_PMC USB_PU LL_SYSCFG_DisableUSBPullUp + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_DisableUSBPullUp(void) +{ + CLEAR_BIT(SYSCFG->PMC, SYSCFG_PMC_USB_PU); +} + +#if defined(LCD) +/** + * @brief Enable decoupling capacitance connection. + * @rmtoll SYSCFG_PMC LCD_CAPA LL_SYSCFG_EnableLCDCapacitanceConnection + * @param Pin This parameter can be a combination of the following values: + * @arg @ref LL_SYSCFG_LCDCAPA_PB2 + * @arg @ref LL_SYSCFG_LCDCAPA_PB12 + * @arg @ref LL_SYSCFG_LCDCAPA_PB0 + * @arg @ref LL_SYSCFG_LCDCAPA_PE11 + * @arg @ref LL_SYSCFG_LCDCAPA_PE12 + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_EnableLCDCapacitanceConnection(uint32_t Pin) +{ + SET_BIT(SYSCFG->PMC, Pin); +} + +/** + * @brief DIsable decoupling capacitance connection. + * @rmtoll SYSCFG_PMC LCD_CAPA LL_SYSCFG_DisableLCDCapacitanceConnection + * @param Pin This parameter can be a combination of the following values: + * @arg @ref LL_SYSCFG_LCDCAPA_PB2 + * @arg @ref LL_SYSCFG_LCDCAPA_PB12 + * @arg @ref LL_SYSCFG_LCDCAPA_PB0 + * @arg @ref LL_SYSCFG_LCDCAPA_PE11 + * @arg @ref LL_SYSCFG_LCDCAPA_PE12 + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_DisableLCDCapacitanceConnection(uint32_t Pin) +{ + CLEAR_BIT(SYSCFG->PMC, Pin); +} +#endif /* LCD */ + +/** + * @brief Configure source input for the EXTI external interrupt. + * @rmtoll SYSCFG_EXTICR1 EXTI0 LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR1 EXTI1 LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR1 EXTI2 LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR1 EXTI3 LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR1 EXTI4 LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR1 EXTI5 LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR1 EXTI6 LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR1 EXTI7 LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR1 EXTI8 LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR1 EXTI9 LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR1 EXTI10 LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR1 EXTI11 LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR1 EXTI12 LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR1 EXTI13 LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR1 EXTI14 LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR1 EXTI15 LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR2 EXTI0 LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR2 EXTI1 LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR2 EXTI2 LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR2 EXTI3 LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR2 EXTI4 LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR2 EXTI5 LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR2 EXTI6 LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR2 EXTI7 LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR2 EXTI8 LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR2 EXTI9 LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR2 EXTI10 LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR2 EXTI11 LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR2 EXTI12 LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR2 EXTI13 LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR2 EXTI14 LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR2 EXTI15 LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR3 EXTI0 LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR3 EXTI1 LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR3 EXTI2 LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR3 EXTI3 LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR3 EXTI4 LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR3 EXTI5 LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR3 EXTI6 LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR3 EXTI7 LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR3 EXTI8 LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR3 EXTI9 LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR3 EXTI10 LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR3 EXTI11 LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR3 EXTI12 LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR3 EXTI13 LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR3 EXTI14 LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR3 EXTI15 LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR4 EXTI0 LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR4 EXTI1 LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR4 EXTI2 LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR4 EXTI3 LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR4 EXTI4 LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR4 EXTI5 LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR4 EXTI6 LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR4 EXTI7 LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR4 EXTI8 LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR4 EXTI9 LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR4 EXTI10 LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR4 EXTI11 LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR4 EXTI12 LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR4 EXTI13 LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR4 EXTI14 LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR4 EXTI15 LL_SYSCFG_SetEXTISource + * @param Port This parameter can be one of the following values: + * @arg @ref LL_SYSCFG_EXTI_PORTA + * @arg @ref LL_SYSCFG_EXTI_PORTB + * @arg @ref LL_SYSCFG_EXTI_PORTC + * @arg @ref LL_SYSCFG_EXTI_PORTD + * @arg @ref LL_SYSCFG_EXTI_PORTE (*) + * @arg @ref LL_SYSCFG_EXTI_PORTF (*) + * @arg @ref LL_SYSCFG_EXTI_PORTG (*) + * @arg @ref LL_SYSCFG_EXTI_PORTH + * + * (*) value not defined in all devices. + * @param Line This parameter can be one of the following values: + * @arg @ref LL_SYSCFG_EXTI_LINE0 + * @arg @ref LL_SYSCFG_EXTI_LINE1 + * @arg @ref LL_SYSCFG_EXTI_LINE2 + * @arg @ref LL_SYSCFG_EXTI_LINE3 + * @arg @ref LL_SYSCFG_EXTI_LINE4 + * @arg @ref LL_SYSCFG_EXTI_LINE5 + * @arg @ref LL_SYSCFG_EXTI_LINE6 + * @arg @ref LL_SYSCFG_EXTI_LINE7 + * @arg @ref LL_SYSCFG_EXTI_LINE8 + * @arg @ref LL_SYSCFG_EXTI_LINE9 + * @arg @ref LL_SYSCFG_EXTI_LINE10 + * @arg @ref LL_SYSCFG_EXTI_LINE11 + * @arg @ref LL_SYSCFG_EXTI_LINE12 + * @arg @ref LL_SYSCFG_EXTI_LINE13 + * @arg @ref LL_SYSCFG_EXTI_LINE14 + * @arg @ref LL_SYSCFG_EXTI_LINE15 + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_SetEXTISource(uint32_t Port, uint32_t Line) +{ + MODIFY_REG(SYSCFG->EXTICR[Line & 0xFF], (Line >> 16), Port << POSITION_VAL((Line >> 16))); +} + +/** + * @brief Get the configured defined for specific EXTI Line + * @rmtoll SYSCFG_EXTICR1 EXTI0 LL_SYSCFG_GetEXTISource\n + * SYSCFG_EXTICR1 EXTI1 LL_SYSCFG_GetEXTISource\n + * SYSCFG_EXTICR1 EXTI2 LL_SYSCFG_GetEXTISource\n + * SYSCFG_EXTICR1 EXTI3 LL_SYSCFG_GetEXTISource\n + * SYSCFG_EXTICR1 EXTI4 LL_SYSCFG_GetEXTISource\n + * SYSCFG_EXTICR1 EXTI5 LL_SYSCFG_GetEXTISource\n + * SYSCFG_EXTICR1 EXTI6 LL_SYSCFG_GetEXTISource\n + * SYSCFG_EXTICR1 EXTI7 LL_SYSCFG_GetEXTISource\n + * SYSCFG_EXTICR1 EXTI8 LL_SYSCFG_GetEXTISource\n + * SYSCFG_EXTICR1 EXTI9 LL_SYSCFG_GetEXTISource\n + * SYSCFG_EXTICR1 EXTI10 LL_SYSCFG_GetEXTISource\n + * SYSCFG_EXTICR1 EXTI11 LL_SYSCFG_GetEXTISource\n + * SYSCFG_EXTICR1 EXTI12 LL_SYSCFG_GetEXTISource\n + * SYSCFG_EXTICR1 EXTI13 LL_SYSCFG_GetEXTISource\n + * SYSCFG_EXTICR1 EXTI14 LL_SYSCFG_GetEXTISource\n + * SYSCFG_EXTICR1 EXTI15 LL_SYSCFG_GetEXTISource\n + * SYSCFG_EXTICR2 EXTI0 LL_SYSCFG_GetEXTISource\n + * SYSCFG_EXTICR2 EXTI1 LL_SYSCFG_GetEXTISource\n + * SYSCFG_EXTICR2 EXTI2 LL_SYSCFG_GetEXTISource\n + * SYSCFG_EXTICR2 EXTI3 LL_SYSCFG_GetEXTISource\n + * SYSCFG_EXTICR2 EXTI4 LL_SYSCFG_GetEXTISource\n + * SYSCFG_EXTICR2 EXTI5 LL_SYSCFG_GetEXTISource\n + * SYSCFG_EXTICR2 EXTI6 LL_SYSCFG_GetEXTISource\n + * SYSCFG_EXTICR2 EXTI7 LL_SYSCFG_GetEXTISource\n + * SYSCFG_EXTICR2 EXTI8 LL_SYSCFG_GetEXTISource\n + * SYSCFG_EXTICR2 EXTI9 LL_SYSCFG_GetEXTISource\n + * SYSCFG_EXTICR2 EXTI10 LL_SYSCFG_GetEXTISource\n + * SYSCFG_EXTICR2 EXTI11 LL_SYSCFG_GetEXTISource\n + * SYSCFG_EXTICR2 EXTI12 LL_SYSCFG_GetEXTISource\n + * SYSCFG_EXTICR2 EXTI13 LL_SYSCFG_GetEXTISource\n + * SYSCFG_EXTICR2 EXTI14 LL_SYSCFG_GetEXTISource\n + * SYSCFG_EXTICR2 EXTI15 LL_SYSCFG_GetEXTISource\n + * SYSCFG_EXTICR3 EXTI0 LL_SYSCFG_GetEXTISource\n + * SYSCFG_EXTICR3 EXTI1 LL_SYSCFG_GetEXTISource\n + * SYSCFG_EXTICR3 EXTI2 LL_SYSCFG_GetEXTISource\n + * SYSCFG_EXTICR3 EXTI3 LL_SYSCFG_GetEXTISource\n + * SYSCFG_EXTICR3 EXTI4 LL_SYSCFG_GetEXTISource\n + * SYSCFG_EXTICR3 EXTI5 LL_SYSCFG_GetEXTISource\n + * SYSCFG_EXTICR3 EXTI6 LL_SYSCFG_GetEXTISource\n + * SYSCFG_EXTICR3 EXTI7 LL_SYSCFG_GetEXTISource\n + * SYSCFG_EXTICR3 EXTI8 LL_SYSCFG_GetEXTISource\n + * SYSCFG_EXTICR3 EXTI9 LL_SYSCFG_GetEXTISource\n + * SYSCFG_EXTICR3 EXTI10 LL_SYSCFG_GetEXTISource\n + * SYSCFG_EXTICR3 EXTI11 LL_SYSCFG_GetEXTISource\n + * SYSCFG_EXTICR3 EXTI12 LL_SYSCFG_GetEXTISource\n + * SYSCFG_EXTICR3 EXTI13 LL_SYSCFG_GetEXTISource\n + * SYSCFG_EXTICR3 EXTI14 LL_SYSCFG_GetEXTISource\n + * SYSCFG_EXTICR3 EXTI15 LL_SYSCFG_GetEXTISource\n + * SYSCFG_EXTICR4 EXTI0 LL_SYSCFG_GetEXTISource\n + * SYSCFG_EXTICR4 EXTI1 LL_SYSCFG_GetEXTISource\n + * SYSCFG_EXTICR4 EXTI2 LL_SYSCFG_GetEXTISource\n + * SYSCFG_EXTICR4 EXTI3 LL_SYSCFG_GetEXTISource\n + * SYSCFG_EXTICR4 EXTI4 LL_SYSCFG_GetEXTISource\n + * SYSCFG_EXTICR4 EXTI5 LL_SYSCFG_GetEXTISource\n + * SYSCFG_EXTICR4 EXTI6 LL_SYSCFG_GetEXTISource\n + * SYSCFG_EXTICR4 EXTI7 LL_SYSCFG_GetEXTISource\n + * SYSCFG_EXTICR4 EXTI8 LL_SYSCFG_GetEXTISource\n + * SYSCFG_EXTICR4 EXTI9 LL_SYSCFG_GetEXTISource\n + * SYSCFG_EXTICR4 EXTI10 LL_SYSCFG_GetEXTISource\n + * SYSCFG_EXTICR4 EXTI11 LL_SYSCFG_GetEXTISource\n + * SYSCFG_EXTICR4 EXTI12 LL_SYSCFG_GetEXTISource\n + * SYSCFG_EXTICR4 EXTI13 LL_SYSCFG_GetEXTISource\n + * SYSCFG_EXTICR4 EXTI14 LL_SYSCFG_GetEXTISource\n + * SYSCFG_EXTICR4 EXTI15 LL_SYSCFG_GetEXTISource + * @param Line This parameter can be one of the following values: + * @arg @ref LL_SYSCFG_EXTI_LINE0 + * @arg @ref LL_SYSCFG_EXTI_LINE1 + * @arg @ref LL_SYSCFG_EXTI_LINE2 + * @arg @ref LL_SYSCFG_EXTI_LINE3 + * @arg @ref LL_SYSCFG_EXTI_LINE4 + * @arg @ref LL_SYSCFG_EXTI_LINE5 + * @arg @ref LL_SYSCFG_EXTI_LINE6 + * @arg @ref LL_SYSCFG_EXTI_LINE7 + * @arg @ref LL_SYSCFG_EXTI_LINE8 + * @arg @ref LL_SYSCFG_EXTI_LINE9 + * @arg @ref LL_SYSCFG_EXTI_LINE10 + * @arg @ref LL_SYSCFG_EXTI_LINE11 + * @arg @ref LL_SYSCFG_EXTI_LINE12 + * @arg @ref LL_SYSCFG_EXTI_LINE13 + * @arg @ref LL_SYSCFG_EXTI_LINE14 + * @arg @ref LL_SYSCFG_EXTI_LINE15 + * @retval Returned value can be one of the following values: + * @arg @ref LL_SYSCFG_EXTI_PORTA + * @arg @ref LL_SYSCFG_EXTI_PORTB + * @arg @ref LL_SYSCFG_EXTI_PORTC + * @arg @ref LL_SYSCFG_EXTI_PORTD + * @arg @ref LL_SYSCFG_EXTI_PORTE (*) + * @arg @ref LL_SYSCFG_EXTI_PORTF (*) + * @arg @ref LL_SYSCFG_EXTI_PORTG (*) + * @arg @ref LL_SYSCFG_EXTI_PORTH + * + * (*) value not defined in all devices. + */ +__STATIC_INLINE uint32_t LL_SYSCFG_GetEXTISource(uint32_t Line) +{ + return (uint32_t)(READ_BIT(SYSCFG->EXTICR[Line & 0xFF], (Line >> 16)) >> POSITION_VAL(Line >> 16)); +} + +/** + * @} + */ + +/** @defgroup SYSTEM_LL_EF_DBGMCU DBGMCU + * @{ + */ + +/** + * @brief Return the device identifier + * @note 0x416: Cat.1 device\n + * 0x429: Cat.2 device\n + * 0x427: Cat.3 device\n + * 0x436: Cat.4 device or Cat.3 device(1)\n + * 0x437: Cat.5 device\n + * + * (1) Cat.3 devices: STM32L15xxC or STM3216xxC devices with + * RPN ending with letter 'A', in WLCSP64 packages or with more then 100 pin. + * @rmtoll DBGMCU_IDCODE DEV_ID LL_DBGMCU_GetDeviceID + * @retval Values between Min_Data=0x00 and Max_Data=0xFFF + */ +__STATIC_INLINE uint32_t LL_DBGMCU_GetDeviceID(void) +{ + return (uint32_t)(READ_BIT(DBGMCU->IDCODE, DBGMCU_IDCODE_DEV_ID)); +} + +/** + * @brief Return the device revision identifier + * @note This field indicates the revision of the device. + For example, it is read as Cat.1 RevA -> 0x1000, Cat.2 Rev Z -> 0x1018... + * @rmtoll DBGMCU_IDCODE REV_ID LL_DBGMCU_GetRevisionID + * @retval Values between Min_Data=0x00 and Max_Data=0xFFFF + */ +__STATIC_INLINE uint32_t LL_DBGMCU_GetRevisionID(void) +{ + return (uint32_t)(READ_BIT(DBGMCU->IDCODE, DBGMCU_IDCODE_REV_ID) >> DBGMCU_REVID_POSITION); +} + +/** + * @brief Enable the Debug Module during SLEEP mode + * @rmtoll DBGMCU_CR DBG_SLEEP LL_DBGMCU_EnableDBGSleepMode + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_EnableDBGSleepMode(void) +{ + SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP); +} + +/** + * @brief Disable the Debug Module during SLEEP mode + * @rmtoll DBGMCU_CR DBG_SLEEP LL_DBGMCU_DisableDBGSleepMode + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_DisableDBGSleepMode(void) +{ + CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP); +} + +/** + * @brief Enable the Debug Module during STOP mode + * @rmtoll DBGMCU_CR DBG_STOP LL_DBGMCU_EnableDBGStopMode + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_EnableDBGStopMode(void) +{ + SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP); +} + +/** + * @brief Disable the Debug Module during STOP mode + * @rmtoll DBGMCU_CR DBG_STOP LL_DBGMCU_DisableDBGStopMode + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_DisableDBGStopMode(void) +{ + CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP); +} + +/** + * @brief Enable the Debug Module during STANDBY mode + * @rmtoll DBGMCU_CR DBG_STANDBY LL_DBGMCU_EnableDBGStandbyMode + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_EnableDBGStandbyMode(void) +{ + SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY); +} + +/** + * @brief Disable the Debug Module during STANDBY mode + * @rmtoll DBGMCU_CR DBG_STANDBY LL_DBGMCU_DisableDBGStandbyMode + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_DisableDBGStandbyMode(void) +{ + CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY); +} + +/** + * @brief Set Trace pin assignment control + * @rmtoll DBGMCU_CR TRACE_IOEN LL_DBGMCU_SetTracePinAssignment\n + * DBGMCU_CR TRACE_MODE LL_DBGMCU_SetTracePinAssignment + * @param PinAssignment This parameter can be one of the following values: + * @arg @ref LL_DBGMCU_TRACE_NONE + * @arg @ref LL_DBGMCU_TRACE_ASYNCH + * @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE1 + * @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE2 + * @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE4 + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_SetTracePinAssignment(uint32_t PinAssignment) +{ + MODIFY_REG(DBGMCU->CR, DBGMCU_CR_TRACE_IOEN | DBGMCU_CR_TRACE_MODE, PinAssignment); +} + +/** + * @brief Get Trace pin assignment control + * @rmtoll DBGMCU_CR TRACE_IOEN LL_DBGMCU_GetTracePinAssignment\n + * DBGMCU_CR TRACE_MODE LL_DBGMCU_GetTracePinAssignment + * @retval Returned value can be one of the following values: + * @arg @ref LL_DBGMCU_TRACE_NONE + * @arg @ref LL_DBGMCU_TRACE_ASYNCH + * @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE1 + * @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE2 + * @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE4 + */ +__STATIC_INLINE uint32_t LL_DBGMCU_GetTracePinAssignment(void) +{ + return (uint32_t)(READ_BIT(DBGMCU->CR, DBGMCU_CR_TRACE_IOEN | DBGMCU_CR_TRACE_MODE)); +} + +/** + * @brief Freeze APB1 peripherals (group1 peripherals) + * @rmtoll APB1_FZ DBG_TIM2_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * APB1_FZ DBG_TIM3_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * APB1_FZ DBG_TIM4_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * APB1_FZ DBG_TIM5_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * APB1_FZ DBG_TIM6_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * APB1_FZ DBG_TIM7_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * APB1_FZ DBG_RTC_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * APB1_FZ DBG_WWDG_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * APB1_FZ DBG_IWDG_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * APB1_FZ DBG_I2C1_SMBUS_TIMEOUT LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * APB1_FZ DBG_I2C2_SMBUS_TIMEOUT LL_DBGMCU_APB1_GRP1_FreezePeriph + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM2_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM3_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM4_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM5_STOP (*) + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM6_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM7_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_RTC_STOP (*) + * @arg @ref LL_DBGMCU_APB1_GRP1_WWDG_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_IWDG_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_I2C1_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_I2C2_STOP + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_APB1_GRP1_FreezePeriph(uint32_t Periphs) +{ + SET_BIT(DBGMCU->APB1FZ, Periphs); +} + +/** + * @brief Unfreeze APB1 peripherals (group1 peripherals) + * @rmtoll APB1_FZ DBG_TIM2_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n + * APB1_FZ DBG_TIM3_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n + * APB1_FZ DBG_TIM4_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n + * APB1_FZ DBG_TIM5_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n + * APB1_FZ DBG_TIM6_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n + * APB1_FZ DBG_TIM7_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n + * APB1_FZ DBG_RTC_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n + * APB1_FZ DBG_WWDG_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n + * APB1_FZ DBG_IWDG_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n + * APB1_FZ DBG_I2C1_SMBUS_TIMEOUT LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n + * APB1_FZ DBG_I2C2_SMBUS_TIMEOUT LL_DBGMCU_APB1_GRP1_UnFreezePeriph + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM2_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM3_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM4_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM5_STOP (*) + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM6_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM7_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_RTC_STOP (*) + * @arg @ref LL_DBGMCU_APB1_GRP1_WWDG_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_IWDG_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_I2C1_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_I2C2_STOP + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_APB1_GRP1_UnFreezePeriph(uint32_t Periphs) +{ + CLEAR_BIT(DBGMCU->APB1FZ, Periphs); +} + +/** + * @brief Freeze APB2 peripherals + * @rmtoll APB2_FZ DBG_TIM9_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph\n + * APB2_FZ DBG_TIM10_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph\n + * APB2_FZ DBG_TIM11_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM9_STOP + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM10_STOP + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM11_STOP + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_APB2_GRP1_FreezePeriph(uint32_t Periphs) +{ + SET_BIT(DBGMCU->APB2FZ, Periphs); +} + +/** + * @brief Unfreeze APB2 peripherals + * @rmtoll APB2_FZ DBG_TIM9_STOP LL_DBGMCU_APB2_GRP1_UnFreezePeriph\n + * APB2_FZ DBG_TIM10_STOP LL_DBGMCU_APB2_GRP1_UnFreezePeriph\n + * APB2_FZ DBG_TIM11_STOP LL_DBGMCU_APB2_GRP1_UnFreezePeriph + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM9_STOP + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM10_STOP + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM11_STOP + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_APB2_GRP1_UnFreezePeriph(uint32_t Periphs) +{ + CLEAR_BIT(DBGMCU->APB2FZ, Periphs); +} + +/** + * @} + */ + +/** @defgroup SYSTEM_LL_EF_RI RI + * @{ + */ + +/** + * @brief Configures the routing interface to map Input Capture x of TIMx to a selected I/O pin. + * @rmtoll RI_ICR IC1OS LL_RI_SetRemapInputCapture_TIM\n + * RI_ICR IC2OS LL_RI_SetRemapInputCapture_TIM\n + * RI_ICR IC3OS LL_RI_SetRemapInputCapture_TIM\n + * RI_ICR IC4OS LL_RI_SetRemapInputCapture_TIM\n + * RI_ICR TIM LL_RI_SetRemapInputCapture_TIM\n + * RI_ICR IC1 LL_RI_SetRemapInputCapture_TIM\n + * RI_ICR IC2 LL_RI_SetRemapInputCapture_TIM\n + * RI_ICR IC3 LL_RI_SetRemapInputCapture_TIM\n + * RI_ICR IC4 LL_RI_SetRemapInputCapture_TIM + * @param TIM_Select This parameter can be one of the following values: + * @arg @ref LL_RI_TIM_SELECT_NONE + * @arg @ref LL_RI_TIM_SELECT_TIM2 + * @arg @ref LL_RI_TIM_SELECT_TIM3 + * @arg @ref LL_RI_TIM_SELECT_TIM4 + * @param InputCaptureChannel This parameter can be one of the following values: + * @arg @ref LL_RI_INPUTCAPTURE_1 + * @arg @ref LL_RI_INPUTCAPTURE_2 + * @arg @ref LL_RI_INPUTCAPTURE_3 + * @arg @ref LL_RI_INPUTCAPTURE_4 + * @param Input This parameter can be one of the following values: + * @arg @ref LL_RI_INPUTCAPTUREROUTING_0 + * @arg @ref LL_RI_INPUTCAPTUREROUTING_1 + * @arg @ref LL_RI_INPUTCAPTUREROUTING_2 + * @arg @ref LL_RI_INPUTCAPTUREROUTING_3 + * @arg @ref LL_RI_INPUTCAPTUREROUTING_4 + * @arg @ref LL_RI_INPUTCAPTUREROUTING_5 + * @arg @ref LL_RI_INPUTCAPTUREROUTING_6 + * @arg @ref LL_RI_INPUTCAPTUREROUTING_7 + * @arg @ref LL_RI_INPUTCAPTUREROUTING_8 + * @arg @ref LL_RI_INPUTCAPTUREROUTING_9 + * @arg @ref LL_RI_INPUTCAPTUREROUTING_10 + * @arg @ref LL_RI_INPUTCAPTUREROUTING_11 + * @arg @ref LL_RI_INPUTCAPTUREROUTING_12 (*) + * @arg @ref LL_RI_INPUTCAPTUREROUTING_13 (*) + * @arg @ref LL_RI_INPUTCAPTUREROUTING_14 (*) + * @arg @ref LL_RI_INPUTCAPTUREROUTING_15 (*) + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_RI_SetRemapInputCapture_TIM(uint32_t TIM_Select, uint32_t InputCaptureChannel, uint32_t Input) +{ + MODIFY_REG(RI->ICR, + RI_ICR_TIM | (InputCaptureChannel & (RI_ICR_IC4 | RI_ICR_IC3 | RI_ICR_IC2 | RI_ICR_IC1)) | (InputCaptureChannel & (RI_ICR_IC4OS | RI_ICR_IC3OS | RI_ICR_IC2OS | RI_ICR_IC1OS)), + TIM_Select | (InputCaptureChannel & (RI_ICR_IC4 | RI_ICR_IC3 | RI_ICR_IC2 | RI_ICR_IC1)) | (Input << POSITION_VAL(InputCaptureChannel))); +} + +/** + * @brief Disable the TIM Input capture remap (select the standard AF) + * @rmtoll RI_ICR IC1 LL_RI_DisableRemapInputCapture_TIM\n + * RI_ICR IC2 LL_RI_DisableRemapInputCapture_TIM\n + * RI_ICR IC3 LL_RI_DisableRemapInputCapture_TIM\n + * RI_ICR IC4 LL_RI_DisableRemapInputCapture_TIM + * @param InputCaptureChannel This parameter can be a combination of the following values: + * @arg @ref LL_RI_INPUTCAPTURE_1 + * @arg @ref LL_RI_INPUTCAPTURE_2 + * @arg @ref LL_RI_INPUTCAPTURE_3 + * @arg @ref LL_RI_INPUTCAPTURE_4 + * @retval None + */ +__STATIC_INLINE void LL_RI_DisableRemapInputCapture_TIM(uint32_t InputCaptureChannel) +{ + CLEAR_BIT(RI->ICR, (InputCaptureChannel & (RI_ICR_IC4 | RI_ICR_IC3 | RI_ICR_IC2 | RI_ICR_IC1))); +} + +/** + * @brief Close the routing interface Input Output switches linked to ADC. + * @rmtoll RI_ASCR1 CH LL_RI_CloseIOSwitchLinkedToADC\n + * RI_ASCR1 VCOMP LL_RI_CloseIOSwitchLinkedToADC + * @param IOSwitch This parameter can be a combination of the following values: + * @arg @ref LL_RI_IOSWITCH_CH0 + * @arg @ref LL_RI_IOSWITCH_CH1 + * @arg @ref LL_RI_IOSWITCH_CH2 + * @arg @ref LL_RI_IOSWITCH_CH3 + * @arg @ref LL_RI_IOSWITCH_CH4 + * @arg @ref LL_RI_IOSWITCH_CH5 + * @arg @ref LL_RI_IOSWITCH_CH6 + * @arg @ref LL_RI_IOSWITCH_CH7 + * @arg @ref LL_RI_IOSWITCH_CH8 + * @arg @ref LL_RI_IOSWITCH_CH9 + * @arg @ref LL_RI_IOSWITCH_CH10 + * @arg @ref LL_RI_IOSWITCH_CH11 + * @arg @ref LL_RI_IOSWITCH_CH12 + * @arg @ref LL_RI_IOSWITCH_CH13 + * @arg @ref LL_RI_IOSWITCH_CH14 + * @arg @ref LL_RI_IOSWITCH_CH15 + * @arg @ref LL_RI_IOSWITCH_CH18 + * @arg @ref LL_RI_IOSWITCH_CH19 + * @arg @ref LL_RI_IOSWITCH_CH20 + * @arg @ref LL_RI_IOSWITCH_CH21 + * @arg @ref LL_RI_IOSWITCH_CH22 + * @arg @ref LL_RI_IOSWITCH_CH23 + * @arg @ref LL_RI_IOSWITCH_CH24 + * @arg @ref LL_RI_IOSWITCH_CH25 + * @arg @ref LL_RI_IOSWITCH_VCOMP + * @arg @ref LL_RI_IOSWITCH_CH27 (*) + * @arg @ref LL_RI_IOSWITCH_CH28 (*) + * @arg @ref LL_RI_IOSWITCH_CH29 (*) + * @arg @ref LL_RI_IOSWITCH_CH30 (*) + * @arg @ref LL_RI_IOSWITCH_CH31 (*) + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_RI_CloseIOSwitchLinkedToADC(uint32_t IOSwitch) +{ + SET_BIT(RI->ASCR1, IOSwitch); +} + +/** + * @brief Open the routing interface Input Output switches linked to ADC. + * @rmtoll RI_ASCR1 CH LL_RI_OpenIOSwitchLinkedToADC\n + * RI_ASCR1 VCOMP LL_RI_OpenIOSwitchLinkedToADC + * @param IOSwitch This parameter can be a combination of the following values: + * @arg @ref LL_RI_IOSWITCH_CH0 + * @arg @ref LL_RI_IOSWITCH_CH1 + * @arg @ref LL_RI_IOSWITCH_CH2 + * @arg @ref LL_RI_IOSWITCH_CH3 + * @arg @ref LL_RI_IOSWITCH_CH4 + * @arg @ref LL_RI_IOSWITCH_CH5 + * @arg @ref LL_RI_IOSWITCH_CH6 + * @arg @ref LL_RI_IOSWITCH_CH7 + * @arg @ref LL_RI_IOSWITCH_CH8 + * @arg @ref LL_RI_IOSWITCH_CH9 + * @arg @ref LL_RI_IOSWITCH_CH10 + * @arg @ref LL_RI_IOSWITCH_CH11 + * @arg @ref LL_RI_IOSWITCH_CH12 + * @arg @ref LL_RI_IOSWITCH_CH13 + * @arg @ref LL_RI_IOSWITCH_CH14 + * @arg @ref LL_RI_IOSWITCH_CH15 + * @arg @ref LL_RI_IOSWITCH_CH18 + * @arg @ref LL_RI_IOSWITCH_CH19 + * @arg @ref LL_RI_IOSWITCH_CH20 + * @arg @ref LL_RI_IOSWITCH_CH21 + * @arg @ref LL_RI_IOSWITCH_CH22 + * @arg @ref LL_RI_IOSWITCH_CH23 + * @arg @ref LL_RI_IOSWITCH_CH24 + * @arg @ref LL_RI_IOSWITCH_CH25 + * @arg @ref LL_RI_IOSWITCH_VCOMP + * @arg @ref LL_RI_IOSWITCH_CH27 (*) + * @arg @ref LL_RI_IOSWITCH_CH28 (*) + * @arg @ref LL_RI_IOSWITCH_CH29 (*) + * @arg @ref LL_RI_IOSWITCH_CH30 (*) + * @arg @ref LL_RI_IOSWITCH_CH31 (*) + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_RI_OpenIOSwitchLinkedToADC(uint32_t IOSwitch) +{ + CLEAR_BIT(RI->ASCR1, IOSwitch); +} + +/** + * @brief Enable the switch control mode. + * @rmtoll RI_ASCR1 SCM LL_RI_EnableSwitchControlMode + * @retval None + */ +__STATIC_INLINE void LL_RI_EnableSwitchControlMode(void) +{ + SET_BIT(RI->ASCR1, RI_ASCR1_SCM); +} + +/** + * @brief Disable the switch control mode. + * @rmtoll RI_ASCR1 SCM LL_RI_DisableSwitchControlMode + * @retval None + */ +__STATIC_INLINE void LL_RI_DisableSwitchControlMode(void) +{ + CLEAR_BIT(RI->ASCR1, RI_ASCR1_SCM); +} + +/** + * @brief Close the routing interface Input Output switches not linked to ADC. + * @rmtoll RI_ASCR2 GR10_1 LL_RI_CloseIOSwitchNotLinkedToADC\n + * RI_ASCR2 GR10_2 LL_RI_CloseIOSwitchNotLinkedToADC\n + * RI_ASCR2 GR10_3 LL_RI_CloseIOSwitchNotLinkedToADC\n + * RI_ASCR2 GR10_4 LL_RI_CloseIOSwitchNotLinkedToADC\n + * RI_ASCR2 GR6_1 LL_RI_CloseIOSwitchNotLinkedToADC\n + * RI_ASCR2 GR6_2 LL_RI_CloseIOSwitchNotLinkedToADC\n + * RI_ASCR2 GR5_1 LL_RI_CloseIOSwitchNotLinkedToADC\n + * RI_ASCR2 GR5_2 LL_RI_CloseIOSwitchNotLinkedToADC\n + * RI_ASCR2 GR5_3 LL_RI_CloseIOSwitchNotLinkedToADC\n + * RI_ASCR2 GR4_1 LL_RI_CloseIOSwitchNotLinkedToADC\n + * RI_ASCR2 GR4_2 LL_RI_CloseIOSwitchNotLinkedToADC\n + * RI_ASCR2 GR4_3 LL_RI_CloseIOSwitchNotLinkedToADC\n + * RI_ASCR2 GR4_4 LL_RI_CloseIOSwitchNotLinkedToADC\n + * RI_ASCR2 CH0b LL_RI_CloseIOSwitchNotLinkedToADC\n + * RI_ASCR2 CH1b LL_RI_CloseIOSwitchNotLinkedToADC\n + * RI_ASCR2 CH2b LL_RI_CloseIOSwitchNotLinkedToADC\n + * RI_ASCR2 CH3b LL_RI_CloseIOSwitchNotLinkedToADC\n + * RI_ASCR2 CH6b LL_RI_CloseIOSwitchNotLinkedToADC\n + * RI_ASCR2 CH7b LL_RI_CloseIOSwitchNotLinkedToADC\n + * RI_ASCR2 CH8b LL_RI_CloseIOSwitchNotLinkedToADC\n + * RI_ASCR2 CH9b LL_RI_CloseIOSwitchNotLinkedToADC\n + * RI_ASCR2 CH10b LL_RI_CloseIOSwitchNotLinkedToADC\n + * RI_ASCR2 CH11b LL_RI_CloseIOSwitchNotLinkedToADC\n + * RI_ASCR2 CH12b LL_RI_CloseIOSwitchNotLinkedToADC\n + * RI_ASCR2 GR6_3 LL_RI_CloseIOSwitchNotLinkedToADC\n + * RI_ASCR2 GR6_4 LL_RI_CloseIOSwitchNotLinkedToADC + * @param IOSwitch This parameter can be a combination of the following values: + * @arg @ref LL_RI_IOSWITCH_GR10_1 + * @arg @ref LL_RI_IOSWITCH_GR10_2 + * @arg @ref LL_RI_IOSWITCH_GR10_3 + * @arg @ref LL_RI_IOSWITCH_GR10_4 + * @arg @ref LL_RI_IOSWITCH_GR6_1 + * @arg @ref LL_RI_IOSWITCH_GR6_2 + * @arg @ref LL_RI_IOSWITCH_GR5_1 + * @arg @ref LL_RI_IOSWITCH_GR5_2 + * @arg @ref LL_RI_IOSWITCH_GR5_3 + * @arg @ref LL_RI_IOSWITCH_GR4_1 + * @arg @ref LL_RI_IOSWITCH_GR4_2 + * @arg @ref LL_RI_IOSWITCH_GR4_3 + * @arg @ref LL_RI_IOSWITCH_CH0b (*) + * @arg @ref LL_RI_IOSWITCH_CH1b (*) + * @arg @ref LL_RI_IOSWITCH_CH2b (*) + * @arg @ref LL_RI_IOSWITCH_CH3b (*) + * @arg @ref LL_RI_IOSWITCH_CH6b (*) + * @arg @ref LL_RI_IOSWITCH_CH7b (*) + * @arg @ref LL_RI_IOSWITCH_CH8b (*) + * @arg @ref LL_RI_IOSWITCH_CH9b (*) + * @arg @ref LL_RI_IOSWITCH_CH10b (*) + * @arg @ref LL_RI_IOSWITCH_CH11b (*) + * @arg @ref LL_RI_IOSWITCH_CH12b (*) + * @arg @ref LL_RI_IOSWITCH_GR6_3 + * @arg @ref LL_RI_IOSWITCH_GR6_4 + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_RI_CloseIOSwitchNotLinkedToADC(uint32_t IOSwitch) +{ + SET_BIT(RI->ASCR2, IOSwitch); +} + +/** + * @brief Open the routing interface Input Output switches not linked to ADC. + * @rmtoll RI_ASCR2 GR10_1 LL_RI_OpenIOSwitchNotLinkedToADC\n + * RI_ASCR2 GR10_2 LL_RI_OpenIOSwitchNotLinkedToADC\n + * RI_ASCR2 GR10_3 LL_RI_OpenIOSwitchNotLinkedToADC\n + * RI_ASCR2 GR10_4 LL_RI_OpenIOSwitchNotLinkedToADC\n + * RI_ASCR2 GR6_1 LL_RI_OpenIOSwitchNotLinkedToADC\n + * RI_ASCR2 GR6_2 LL_RI_OpenIOSwitchNotLinkedToADC\n + * RI_ASCR2 GR5_1 LL_RI_OpenIOSwitchNotLinkedToADC\n + * RI_ASCR2 GR5_2 LL_RI_OpenIOSwitchNotLinkedToADC\n + * RI_ASCR2 GR5_3 LL_RI_OpenIOSwitchNotLinkedToADC\n + * RI_ASCR2 GR4_1 LL_RI_OpenIOSwitchNotLinkedToADC\n + * RI_ASCR2 GR4_2 LL_RI_OpenIOSwitchNotLinkedToADC\n + * RI_ASCR2 GR4_3 LL_RI_OpenIOSwitchNotLinkedToADC\n + * RI_ASCR2 GR4_4 LL_RI_OpenIOSwitchNotLinkedToADC\n + * RI_ASCR2 CH0b LL_RI_OpenIOSwitchNotLinkedToADC\n + * RI_ASCR2 CH1b LL_RI_OpenIOSwitchNotLinkedToADC\n + * RI_ASCR2 CH2b LL_RI_OpenIOSwitchNotLinkedToADC\n + * RI_ASCR2 CH3b LL_RI_OpenIOSwitchNotLinkedToADC\n + * RI_ASCR2 CH6b LL_RI_OpenIOSwitchNotLinkedToADC\n + * RI_ASCR2 CH7b LL_RI_OpenIOSwitchNotLinkedToADC\n + * RI_ASCR2 CH8b LL_RI_OpenIOSwitchNotLinkedToADC\n + * RI_ASCR2 CH9b LL_RI_OpenIOSwitchNotLinkedToADC\n + * RI_ASCR2 CH10b LL_RI_OpenIOSwitchNotLinkedToADC\n + * RI_ASCR2 CH11b LL_RI_OpenIOSwitchNotLinkedToADC\n + * RI_ASCR2 CH12b LL_RI_OpenIOSwitchNotLinkedToADC\n + * RI_ASCR2 GR6_3 LL_RI_OpenIOSwitchNotLinkedToADC\n + * RI_ASCR2 GR6_4 LL_RI_OpenIOSwitchNotLinkedToADC + * @param IOSwitch This parameter can be a combination of the following values: + * @arg @ref LL_RI_IOSWITCH_GR10_1 + * @arg @ref LL_RI_IOSWITCH_GR10_2 + * @arg @ref LL_RI_IOSWITCH_GR10_3 + * @arg @ref LL_RI_IOSWITCH_GR10_4 + * @arg @ref LL_RI_IOSWITCH_GR6_1 + * @arg @ref LL_RI_IOSWITCH_GR6_2 + * @arg @ref LL_RI_IOSWITCH_GR5_1 + * @arg @ref LL_RI_IOSWITCH_GR5_2 + * @arg @ref LL_RI_IOSWITCH_GR5_3 + * @arg @ref LL_RI_IOSWITCH_GR4_1 + * @arg @ref LL_RI_IOSWITCH_GR4_2 + * @arg @ref LL_RI_IOSWITCH_GR4_3 + * @arg @ref LL_RI_IOSWITCH_CH0b (*) + * @arg @ref LL_RI_IOSWITCH_CH1b (*) + * @arg @ref LL_RI_IOSWITCH_CH2b (*) + * @arg @ref LL_RI_IOSWITCH_CH3b (*) + * @arg @ref LL_RI_IOSWITCH_CH6b (*) + * @arg @ref LL_RI_IOSWITCH_CH7b (*) + * @arg @ref LL_RI_IOSWITCH_CH8b (*) + * @arg @ref LL_RI_IOSWITCH_CH9b (*) + * @arg @ref LL_RI_IOSWITCH_CH10b (*) + * @arg @ref LL_RI_IOSWITCH_CH11b (*) + * @arg @ref LL_RI_IOSWITCH_CH12b (*) + * @arg @ref LL_RI_IOSWITCH_GR6_3 + * @arg @ref LL_RI_IOSWITCH_GR6_4 + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_RI_OpenIOSwitchNotLinkedToADC(uint32_t IOSwitch) +{ + CLEAR_BIT(RI->ASCR2, IOSwitch); +} + +/** + * @brief Enable Hysteresis of the input schmitt triger of the port X + * @rmtoll RI_HYSCR1 PA LL_RI_EnableHysteresis\n + * RI_HYSCR1 PB LL_RI_EnableHysteresis\n + * RI_HYSCR1 PC LL_RI_EnableHysteresis\n + * RI_HYSCR1 PD LL_RI_EnableHysteresis\n + * RI_HYSCR1 PE LL_RI_EnableHysteresis\n + * RI_HYSCR1 PF LL_RI_EnableHysteresis\n + * RI_HYSCR1 PG LL_RI_EnableHysteresis\n + * RI_HYSCR2 PA LL_RI_EnableHysteresis\n + * RI_HYSCR2 PB LL_RI_EnableHysteresis\n + * RI_HYSCR2 PC LL_RI_EnableHysteresis\n + * RI_HYSCR2 PD LL_RI_EnableHysteresis\n + * RI_HYSCR2 PE LL_RI_EnableHysteresis\n + * RI_HYSCR2 PF LL_RI_EnableHysteresis\n + * RI_HYSCR2 PG LL_RI_EnableHysteresis\n + * RI_HYSCR3 PA LL_RI_EnableHysteresis\n + * RI_HYSCR3 PB LL_RI_EnableHysteresis\n + * RI_HYSCR3 PC LL_RI_EnableHysteresis\n + * RI_HYSCR3 PD LL_RI_EnableHysteresis\n + * RI_HYSCR3 PE LL_RI_EnableHysteresis\n + * RI_HYSCR3 PF LL_RI_EnableHysteresis\n + * RI_HYSCR3 PG LL_RI_EnableHysteresis\n + * RI_HYSCR4 PA LL_RI_EnableHysteresis\n + * RI_HYSCR4 PB LL_RI_EnableHysteresis\n + * RI_HYSCR4 PC LL_RI_EnableHysteresis\n + * RI_HYSCR4 PD LL_RI_EnableHysteresis\n + * RI_HYSCR4 PE LL_RI_EnableHysteresis\n + * RI_HYSCR4 PF LL_RI_EnableHysteresis\n + * RI_HYSCR4 PG LL_RI_EnableHysteresis + * @param Port This parameter can be one of the following values: + * @arg @ref LL_RI_HSYTERESIS_PORT_A + * @arg @ref LL_RI_HSYTERESIS_PORT_B + * @arg @ref LL_RI_HSYTERESIS_PORT_C + * @arg @ref LL_RI_HSYTERESIS_PORT_D + * @arg @ref LL_RI_HSYTERESIS_PORT_E (*) + * @arg @ref LL_RI_HSYTERESIS_PORT_F (*) + * @arg @ref LL_RI_HSYTERESIS_PORT_G (*) + * + * (*) value not defined in all devices. + * @param Pin This parameter can be a combination of the following values: + * @arg @ref LL_RI_PIN_0 + * @arg @ref LL_RI_PIN_1 + * @arg @ref LL_RI_PIN_2 + * @arg @ref LL_RI_PIN_3 + * @arg @ref LL_RI_PIN_4 + * @arg @ref LL_RI_PIN_5 + * @arg @ref LL_RI_PIN_6 + * @arg @ref LL_RI_PIN_7 + * @arg @ref LL_RI_PIN_8 + * @arg @ref LL_RI_PIN_9 + * @arg @ref LL_RI_PIN_10 + * @arg @ref LL_RI_PIN_11 + * @arg @ref LL_RI_PIN_12 + * @arg @ref LL_RI_PIN_13 + * @arg @ref LL_RI_PIN_14 + * @arg @ref LL_RI_PIN_15 + * @arg @ref LL_RI_PIN_ALL + * @retval None + */ +__STATIC_INLINE void LL_RI_EnableHysteresis(uint32_t Port, uint32_t Pin) +{ + __IO uint32_t *reg = (__IO uint32_t *)(uint32_t)((uint32_t)(&RI->HYSCR1) + (Port >> 1)); + CLEAR_BIT(*reg, Pin << (16 * (Port & 1))); +} + +/** + * @brief Disable Hysteresis of the input schmitt triger of the port X + * @rmtoll RI_HYSCR1 PA LL_RI_DisableHysteresis\n + * RI_HYSCR1 PB LL_RI_DisableHysteresis\n + * RI_HYSCR1 PC LL_RI_DisableHysteresis\n + * RI_HYSCR1 PD LL_RI_DisableHysteresis\n + * RI_HYSCR1 PE LL_RI_DisableHysteresis\n + * RI_HYSCR1 PF LL_RI_DisableHysteresis\n + * RI_HYSCR1 PG LL_RI_DisableHysteresis\n + * RI_HYSCR2 PA LL_RI_DisableHysteresis\n + * RI_HYSCR2 PB LL_RI_DisableHysteresis\n + * RI_HYSCR2 PC LL_RI_DisableHysteresis\n + * RI_HYSCR2 PD LL_RI_DisableHysteresis\n + * RI_HYSCR2 PE LL_RI_DisableHysteresis\n + * RI_HYSCR2 PF LL_RI_DisableHysteresis\n + * RI_HYSCR2 PG LL_RI_DisableHysteresis\n + * RI_HYSCR3 PA LL_RI_DisableHysteresis\n + * RI_HYSCR3 PB LL_RI_DisableHysteresis\n + * RI_HYSCR3 PC LL_RI_DisableHysteresis\n + * RI_HYSCR3 PD LL_RI_DisableHysteresis\n + * RI_HYSCR3 PE LL_RI_DisableHysteresis\n + * RI_HYSCR3 PF LL_RI_DisableHysteresis\n + * RI_HYSCR3 PG LL_RI_DisableHysteresis\n + * RI_HYSCR4 PA LL_RI_DisableHysteresis\n + * RI_HYSCR4 PB LL_RI_DisableHysteresis\n + * RI_HYSCR4 PC LL_RI_DisableHysteresis\n + * RI_HYSCR4 PD LL_RI_DisableHysteresis\n + * RI_HYSCR4 PE LL_RI_DisableHysteresis\n + * RI_HYSCR4 PF LL_RI_DisableHysteresis\n + * RI_HYSCR4 PG LL_RI_DisableHysteresis + * @param Port This parameter can be one of the following values: + * @arg @ref LL_RI_HSYTERESIS_PORT_A + * @arg @ref LL_RI_HSYTERESIS_PORT_B + * @arg @ref LL_RI_HSYTERESIS_PORT_C + * @arg @ref LL_RI_HSYTERESIS_PORT_D + * @arg @ref LL_RI_HSYTERESIS_PORT_E (*) + * @arg @ref LL_RI_HSYTERESIS_PORT_F (*) + * @arg @ref LL_RI_HSYTERESIS_PORT_G (*) + * + * (*) value not defined in all devices. + * @param Pin This parameter can be a combination of the following values: + * @arg @ref LL_RI_PIN_0 + * @arg @ref LL_RI_PIN_1 + * @arg @ref LL_RI_PIN_2 + * @arg @ref LL_RI_PIN_3 + * @arg @ref LL_RI_PIN_4 + * @arg @ref LL_RI_PIN_5 + * @arg @ref LL_RI_PIN_6 + * @arg @ref LL_RI_PIN_7 + * @arg @ref LL_RI_PIN_8 + * @arg @ref LL_RI_PIN_9 + * @arg @ref LL_RI_PIN_10 + * @arg @ref LL_RI_PIN_11 + * @arg @ref LL_RI_PIN_12 + * @arg @ref LL_RI_PIN_13 + * @arg @ref LL_RI_PIN_14 + * @arg @ref LL_RI_PIN_15 + * @arg @ref LL_RI_PIN_ALL + * @retval None + */ +__STATIC_INLINE void LL_RI_DisableHysteresis(uint32_t Port, uint32_t Pin) +{ + __IO uint32_t *reg = (__IO uint32_t *)(uint32_t)((uint32_t)(&RI->HYSCR1) + ((Port >> 1) << 2)); + SET_BIT(*reg, Pin << (16 * (Port & 1))); +} + +#if defined(RI_ASMR1_PA) +/** + * @brief Control analog switches of port X through the ADC interface or RI_ASCRx registers. + * @rmtoll RI_ASMR1 PA LL_RI_ControlSwitchByADC\n + * RI_ASMR1 PB LL_RI_ControlSwitchByADC\n + * RI_ASMR1 PC LL_RI_ControlSwitchByADC\n + * RI_ASMR1 PF LL_RI_ControlSwitchByADC\n + * RI_ASMR1 PG LL_RI_ControlSwitchByADC\n + * RI_ASMR2 PA LL_RI_ControlSwitchByADC\n + * RI_ASMR2 PB LL_RI_ControlSwitchByADC\n + * RI_ASMR2 PC LL_RI_ControlSwitchByADC\n + * RI_ASMR2 PF LL_RI_ControlSwitchByADC\n + * RI_ASMR2 PG LL_RI_ControlSwitchByADC\n + * RI_ASMR3 PA LL_RI_ControlSwitchByADC\n + * RI_ASMR3 PB LL_RI_ControlSwitchByADC\n + * RI_ASMR3 PC LL_RI_ControlSwitchByADC\n + * RI_ASMR3 PF LL_RI_ControlSwitchByADC\n + * RI_ASMR3 PG LL_RI_ControlSwitchByADC\n + * RI_ASMR4 PA LL_RI_ControlSwitchByADC\n + * RI_ASMR4 PB LL_RI_ControlSwitchByADC\n + * RI_ASMR4 PC LL_RI_ControlSwitchByADC\n + * RI_ASMR4 PF LL_RI_ControlSwitchByADC\n + * RI_ASMR4 PG LL_RI_ControlSwitchByADC\n + * RI_ASMR5 PA LL_RI_ControlSwitchByADC\n + * RI_ASMR5 PB LL_RI_ControlSwitchByADC\n + * RI_ASMR5 PC LL_RI_ControlSwitchByADC\n + * RI_ASMR5 PF LL_RI_ControlSwitchByADC\n + * RI_ASMR5 PG LL_RI_ControlSwitchByADC + * @param Port This parameter can be one of the following values: + * @arg @ref LL_RI_PORT_A + * @arg @ref LL_RI_PORT_B + * @arg @ref LL_RI_PORT_C + * @arg @ref LL_RI_PORT_F (*) + * @arg @ref LL_RI_PORT_G (*) + * + * (*) value not defined in all devices. + * @param Pin This parameter can be a combination of the following values: + * @arg @ref LL_RI_PIN_0 + * @arg @ref LL_RI_PIN_1 + * @arg @ref LL_RI_PIN_2 + * @arg @ref LL_RI_PIN_3 + * @arg @ref LL_RI_PIN_4 + * @arg @ref LL_RI_PIN_5 + * @arg @ref LL_RI_PIN_6 + * @arg @ref LL_RI_PIN_7 + * @arg @ref LL_RI_PIN_8 + * @arg @ref LL_RI_PIN_9 + * @arg @ref LL_RI_PIN_10 + * @arg @ref LL_RI_PIN_11 + * @arg @ref LL_RI_PIN_12 + * @arg @ref LL_RI_PIN_13 + * @arg @ref LL_RI_PIN_14 + * @arg @ref LL_RI_PIN_15 + * @arg @ref LL_RI_PIN_ALL + * @retval None + */ +__STATIC_INLINE void LL_RI_ControlSwitchByADC(uint32_t Port, uint32_t Pin) +{ + __IO uint32_t *reg = (__IO uint32_t *)(uint32_t)((uint32_t)(&RI->ASMR1) + ((Port * 3U) << 2)); + CLEAR_BIT(*reg, Pin); +} +#endif /* RI_ASMR1_PA */ + +#if defined(RI_ASMR1_PA) +/** + * @brief Control analog switches of port X by the timer OC. + * @rmtoll RI_ASMR1 PA LL_RI_ControlSwitchByTIM\n + * RI_ASMR1 PB LL_RI_ControlSwitchByTIM\n + * RI_ASMR1 PC LL_RI_ControlSwitchByTIM\n + * RI_ASMR1 PF LL_RI_ControlSwitchByTIM\n + * RI_ASMR1 PG LL_RI_ControlSwitchByTIM\n + * RI_ASMR2 PA LL_RI_ControlSwitchByTIM\n + * RI_ASMR2 PB LL_RI_ControlSwitchByTIM\n + * RI_ASMR2 PC LL_RI_ControlSwitchByTIM\n + * RI_ASMR2 PF LL_RI_ControlSwitchByTIM\n + * RI_ASMR2 PG LL_RI_ControlSwitchByTIM\n + * RI_ASMR3 PA LL_RI_ControlSwitchByTIM\n + * RI_ASMR3 PB LL_RI_ControlSwitchByTIM\n + * RI_ASMR3 PC LL_RI_ControlSwitchByTIM\n + * RI_ASMR3 PF LL_RI_ControlSwitchByTIM\n + * RI_ASMR3 PG LL_RI_ControlSwitchByTIM\n + * RI_ASMR4 PA LL_RI_ControlSwitchByTIM\n + * RI_ASMR4 PB LL_RI_ControlSwitchByTIM\n + * RI_ASMR4 PC LL_RI_ControlSwitchByTIM\n + * RI_ASMR4 PF LL_RI_ControlSwitchByTIM\n + * RI_ASMR4 PG LL_RI_ControlSwitchByTIM\n + * RI_ASMR5 PA LL_RI_ControlSwitchByTIM\n + * RI_ASMR5 PB LL_RI_ControlSwitchByTIM\n + * RI_ASMR5 PC LL_RI_ControlSwitchByTIM\n + * RI_ASMR5 PF LL_RI_ControlSwitchByTIM\n + * RI_ASMR5 PG LL_RI_ControlSwitchByTIM + * @param Port This parameter can be one of the following values: + * @arg @ref LL_RI_PORT_A + * @arg @ref LL_RI_PORT_B + * @arg @ref LL_RI_PORT_C + * @arg @ref LL_RI_PORT_F (*) + * @arg @ref LL_RI_PORT_G (*) + * + * (*) value not defined in all devices. + * @param Pin This parameter can be a combination of the following values: + * @arg @ref LL_RI_PIN_0 + * @arg @ref LL_RI_PIN_1 + * @arg @ref LL_RI_PIN_2 + * @arg @ref LL_RI_PIN_3 + * @arg @ref LL_RI_PIN_4 + * @arg @ref LL_RI_PIN_5 + * @arg @ref LL_RI_PIN_6 + * @arg @ref LL_RI_PIN_7 + * @arg @ref LL_RI_PIN_8 + * @arg @ref LL_RI_PIN_9 + * @arg @ref LL_RI_PIN_10 + * @arg @ref LL_RI_PIN_11 + * @arg @ref LL_RI_PIN_12 + * @arg @ref LL_RI_PIN_13 + * @arg @ref LL_RI_PIN_14 + * @arg @ref LL_RI_PIN_15 + * @arg @ref LL_RI_PIN_ALL + * @retval None + */ +__STATIC_INLINE void LL_RI_ControlSwitchByTIM(uint32_t Port, uint32_t Pin) +{ + __IO uint32_t *reg = (__IO uint32_t *)(uint32_t)((uint32_t)(&RI->ASMR1) + ((Port * 3U) << 2)); + SET_BIT(*reg, Pin); +} +#endif /* RI_ASMR1_PA */ + +#if defined(RI_CMR1_PA) +/** + * @brief Mask the input of port X during the capacitive sensing acquisition. + * @rmtoll RI_CMR1 PA LL_RI_MaskChannelDuringAcquisition\n + * RI_CMR1 PB LL_RI_MaskChannelDuringAcquisition\n + * RI_CMR1 PC LL_RI_MaskChannelDuringAcquisition\n + * RI_CMR1 PF LL_RI_MaskChannelDuringAcquisition\n + * RI_CMR1 PG LL_RI_MaskChannelDuringAcquisition\n + * RI_CMR2 PA LL_RI_MaskChannelDuringAcquisition\n + * RI_CMR2 PB LL_RI_MaskChannelDuringAcquisition\n + * RI_CMR2 PC LL_RI_MaskChannelDuringAcquisition\n + * RI_CMR2 PF LL_RI_MaskChannelDuringAcquisition\n + * RI_CMR2 PG LL_RI_MaskChannelDuringAcquisition\n + * RI_CMR3 PA LL_RI_MaskChannelDuringAcquisition\n + * RI_CMR3 PB LL_RI_MaskChannelDuringAcquisition\n + * RI_CMR3 PC LL_RI_MaskChannelDuringAcquisition\n + * RI_CMR3 PF LL_RI_MaskChannelDuringAcquisition\n + * RI_CMR3 PG LL_RI_MaskChannelDuringAcquisition\n + * RI_CMR4 PA LL_RI_MaskChannelDuringAcquisition\n + * RI_CMR4 PB LL_RI_MaskChannelDuringAcquisition\n + * RI_CMR4 PC LL_RI_MaskChannelDuringAcquisition\n + * RI_CMR4 PF LL_RI_MaskChannelDuringAcquisition\n + * RI_CMR4 PG LL_RI_MaskChannelDuringAcquisition\n + * RI_CMR5 PA LL_RI_MaskChannelDuringAcquisition\n + * RI_CMR5 PB LL_RI_MaskChannelDuringAcquisition\n + * RI_CMR5 PC LL_RI_MaskChannelDuringAcquisition\n + * RI_CMR5 PF LL_RI_MaskChannelDuringAcquisition\n + * RI_CMR5 PG LL_RI_MaskChannelDuringAcquisition + * @param Port This parameter can be one of the following values: + * @arg @ref LL_RI_PORT_A + * @arg @ref LL_RI_PORT_B + * @arg @ref LL_RI_PORT_C + * @arg @ref LL_RI_PORT_F (*) + * @arg @ref LL_RI_PORT_G (*) + * + * (*) value not defined in all devices. + * @param Pin This parameter can be a combination of the following values: + * @arg @ref LL_RI_PIN_0 + * @arg @ref LL_RI_PIN_1 + * @arg @ref LL_RI_PIN_2 + * @arg @ref LL_RI_PIN_3 + * @arg @ref LL_RI_PIN_4 + * @arg @ref LL_RI_PIN_5 + * @arg @ref LL_RI_PIN_6 + * @arg @ref LL_RI_PIN_7 + * @arg @ref LL_RI_PIN_8 + * @arg @ref LL_RI_PIN_9 + * @arg @ref LL_RI_PIN_10 + * @arg @ref LL_RI_PIN_11 + * @arg @ref LL_RI_PIN_12 + * @arg @ref LL_RI_PIN_13 + * @arg @ref LL_RI_PIN_14 + * @arg @ref LL_RI_PIN_15 + * @arg @ref LL_RI_PIN_ALL + * @retval None + */ +__STATIC_INLINE void LL_RI_MaskChannelDuringAcquisition(uint32_t Port, uint32_t Pin) +{ + __IO uint32_t *reg = (__IO uint32_t *)(uint32_t)((uint32_t)(&RI->CMR1) + ((Port * 3U) << 2)); + CLEAR_BIT(*reg, Pin); +} +#endif /* RI_CMR1_PA */ + +#if defined(RI_CMR1_PA) +/** + * @brief Unmask the input of port X during the capacitive sensing acquisition. + * @rmtoll RI_CMR1 PA LL_RI_UnmaskChannelDuringAcquisition\n + * RI_CMR1 PB LL_RI_UnmaskChannelDuringAcquisition\n + * RI_CMR1 PC LL_RI_UnmaskChannelDuringAcquisition\n + * RI_CMR1 PF LL_RI_UnmaskChannelDuringAcquisition\n + * RI_CMR1 PG LL_RI_UnmaskChannelDuringAcquisition\n + * RI_CMR2 PA LL_RI_UnmaskChannelDuringAcquisition\n + * RI_CMR2 PB LL_RI_UnmaskChannelDuringAcquisition\n + * RI_CMR2 PC LL_RI_UnmaskChannelDuringAcquisition\n + * RI_CMR2 PF LL_RI_UnmaskChannelDuringAcquisition\n + * RI_CMR2 PG LL_RI_UnmaskChannelDuringAcquisition\n + * RI_CMR3 PA LL_RI_UnmaskChannelDuringAcquisition\n + * RI_CMR3 PB LL_RI_UnmaskChannelDuringAcquisition\n + * RI_CMR3 PC LL_RI_UnmaskChannelDuringAcquisition\n + * RI_CMR3 PF LL_RI_UnmaskChannelDuringAcquisition\n + * RI_CMR3 PG LL_RI_UnmaskChannelDuringAcquisition\n + * RI_CMR4 PA LL_RI_UnmaskChannelDuringAcquisition\n + * RI_CMR4 PB LL_RI_UnmaskChannelDuringAcquisition\n + * RI_CMR4 PC LL_RI_UnmaskChannelDuringAcquisition\n + * RI_CMR4 PF LL_RI_UnmaskChannelDuringAcquisition\n + * RI_CMR4 PG LL_RI_UnmaskChannelDuringAcquisition\n + * RI_CMR5 PA LL_RI_UnmaskChannelDuringAcquisition\n + * RI_CMR5 PB LL_RI_UnmaskChannelDuringAcquisition\n + * RI_CMR5 PC LL_RI_UnmaskChannelDuringAcquisition\n + * RI_CMR5 PF LL_RI_UnmaskChannelDuringAcquisition\n + * RI_CMR5 PG LL_RI_UnmaskChannelDuringAcquisition + * @param Port This parameter can be one of the following values: + * @arg @ref LL_RI_PORT_A + * @arg @ref LL_RI_PORT_B + * @arg @ref LL_RI_PORT_C + * @arg @ref LL_RI_PORT_F (*) + * @arg @ref LL_RI_PORT_G (*) + * + * (*) value not defined in all devices. + * @param Pin This parameter can be a combination of the following values: + * @arg @ref LL_RI_PIN_0 + * @arg @ref LL_RI_PIN_1 + * @arg @ref LL_RI_PIN_2 + * @arg @ref LL_RI_PIN_3 + * @arg @ref LL_RI_PIN_4 + * @arg @ref LL_RI_PIN_5 + * @arg @ref LL_RI_PIN_6 + * @arg @ref LL_RI_PIN_7 + * @arg @ref LL_RI_PIN_8 + * @arg @ref LL_RI_PIN_9 + * @arg @ref LL_RI_PIN_10 + * @arg @ref LL_RI_PIN_11 + * @arg @ref LL_RI_PIN_12 + * @arg @ref LL_RI_PIN_13 + * @arg @ref LL_RI_PIN_14 + * @arg @ref LL_RI_PIN_15 + * @arg @ref LL_RI_PIN_ALL + * @retval None + */ +__STATIC_INLINE void LL_RI_UnmaskChannelDuringAcquisition(uint32_t Port, uint32_t Pin) +{ + __IO uint32_t *reg = (__IO uint32_t *)(uint32_t)((uint32_t)(&RI->CMR1) + ((Port * 3U) << 2)); + SET_BIT(*reg, Pin); +} +#endif /* RI_CMR1_PA */ + +#if defined(RI_CICR1_PA) +/** + * @brief Identify channel for timer input capture + * @rmtoll RI_CICR1 PA LL_RI_IdentifyChannelIO\n + * RI_CICR1 PB LL_RI_IdentifyChannelIO\n + * RI_CICR1 PC LL_RI_IdentifyChannelIO\n + * RI_CICR1 PF LL_RI_IdentifyChannelIO\n + * RI_CICR1 PG LL_RI_IdentifyChannelIO\n + * RI_CICR2 PA LL_RI_IdentifyChannelIO\n + * RI_CICR2 PB LL_RI_IdentifyChannelIO\n + * RI_CICR2 PC LL_RI_IdentifyChannelIO\n + * RI_CICR2 PF LL_RI_IdentifyChannelIO\n + * RI_CICR2 PG LL_RI_IdentifyChannelIO\n + * RI_CICR3 PA LL_RI_IdentifyChannelIO\n + * RI_CICR3 PB LL_RI_IdentifyChannelIO\n + * RI_CICR3 PC LL_RI_IdentifyChannelIO\n + * RI_CICR3 PF LL_RI_IdentifyChannelIO\n + * RI_CICR3 PG LL_RI_IdentifyChannelIO\n + * RI_CICR4 PA LL_RI_IdentifyChannelIO\n + * RI_CICR4 PB LL_RI_IdentifyChannelIO\n + * RI_CICR4 PC LL_RI_IdentifyChannelIO\n + * RI_CICR4 PF LL_RI_IdentifyChannelIO\n + * RI_CICR4 PG LL_RI_IdentifyChannelIO\n + * RI_CICR5 PA LL_RI_IdentifyChannelIO\n + * RI_CICR5 PB LL_RI_IdentifyChannelIO\n + * RI_CICR5 PC LL_RI_IdentifyChannelIO\n + * RI_CICR5 PF LL_RI_IdentifyChannelIO\n + * RI_CICR5 PG LL_RI_IdentifyChannelIO + * @param Port This parameter can be one of the following values: + * @arg @ref LL_RI_PORT_A + * @arg @ref LL_RI_PORT_B + * @arg @ref LL_RI_PORT_C + * @arg @ref LL_RI_PORT_F (*) + * @arg @ref LL_RI_PORT_G (*) + * + * (*) value not defined in all devices. + * @param Pin This parameter can be a combination of the following values: + * @arg @ref LL_RI_PIN_0 + * @arg @ref LL_RI_PIN_1 + * @arg @ref LL_RI_PIN_2 + * @arg @ref LL_RI_PIN_3 + * @arg @ref LL_RI_PIN_4 + * @arg @ref LL_RI_PIN_5 + * @arg @ref LL_RI_PIN_6 + * @arg @ref LL_RI_PIN_7 + * @arg @ref LL_RI_PIN_8 + * @arg @ref LL_RI_PIN_9 + * @arg @ref LL_RI_PIN_10 + * @arg @ref LL_RI_PIN_11 + * @arg @ref LL_RI_PIN_12 + * @arg @ref LL_RI_PIN_13 + * @arg @ref LL_RI_PIN_14 + * @arg @ref LL_RI_PIN_15 + * @arg @ref LL_RI_PIN_ALL + * @retval None + */ +__STATIC_INLINE void LL_RI_IdentifyChannelIO(uint32_t Port, uint32_t Pin) +{ + __IO uint32_t *reg = (__IO uint32_t *)(uint32_t)((uint32_t)(&RI->CICR1) + ((Port * 3U) << 2)); + CLEAR_BIT(*reg, Pin); +} +#endif /* RI_CICR1_PA */ + +#if defined(RI_CICR1_PA) +/** + * @brief Identify sampling capacitor for timer input capture + * @rmtoll RI_CICR1 PA LL_RI_IdentifySamplingCapacitorIO\n + * RI_CICR1 PB LL_RI_IdentifySamplingCapacitorIO\n + * RI_CICR1 PC LL_RI_IdentifySamplingCapacitorIO\n + * RI_CICR1 PF LL_RI_IdentifySamplingCapacitorIO\n + * RI_CICR1 PG LL_RI_IdentifySamplingCapacitorIO\n + * RI_CICR2 PA LL_RI_IdentifySamplingCapacitorIO\n + * RI_CICR2 PB LL_RI_IdentifySamplingCapacitorIO\n + * RI_CICR2 PC LL_RI_IdentifySamplingCapacitorIO\n + * RI_CICR2 PF LL_RI_IdentifySamplingCapacitorIO\n + * RI_CICR2 PG LL_RI_IdentifySamplingCapacitorIO\n + * RI_CICR3 PA LL_RI_IdentifySamplingCapacitorIO\n + * RI_CICR3 PB LL_RI_IdentifySamplingCapacitorIO\n + * RI_CICR3 PC LL_RI_IdentifySamplingCapacitorIO\n + * RI_CICR3 PF LL_RI_IdentifySamplingCapacitorIO\n + * RI_CICR3 PG LL_RI_IdentifySamplingCapacitorIO\n + * RI_CICR4 PA LL_RI_IdentifySamplingCapacitorIO\n + * RI_CICR4 PB LL_RI_IdentifySamplingCapacitorIO\n + * RI_CICR4 PC LL_RI_IdentifySamplingCapacitorIO\n + * RI_CICR4 PF LL_RI_IdentifySamplingCapacitorIO\n + * RI_CICR4 PG LL_RI_IdentifySamplingCapacitorIO\n + * RI_CICR5 PA LL_RI_IdentifySamplingCapacitorIO\n + * RI_CICR5 PB LL_RI_IdentifySamplingCapacitorIO\n + * RI_CICR5 PC LL_RI_IdentifySamplingCapacitorIO\n + * RI_CICR5 PF LL_RI_IdentifySamplingCapacitorIO\n + * RI_CICR5 PG LL_RI_IdentifySamplingCapacitorIO + * @param Port This parameter can be one of the following values: + * @arg @ref LL_RI_PORT_A + * @arg @ref LL_RI_PORT_B + * @arg @ref LL_RI_PORT_C + * @arg @ref LL_RI_PORT_F (*) + * @arg @ref LL_RI_PORT_G (*) + * + * (*) value not defined in all devices. + * @param Pin This parameter can be a combination of the following values: + * @arg @ref LL_RI_PIN_0 + * @arg @ref LL_RI_PIN_1 + * @arg @ref LL_RI_PIN_2 + * @arg @ref LL_RI_PIN_3 + * @arg @ref LL_RI_PIN_4 + * @arg @ref LL_RI_PIN_5 + * @arg @ref LL_RI_PIN_6 + * @arg @ref LL_RI_PIN_7 + * @arg @ref LL_RI_PIN_8 + * @arg @ref LL_RI_PIN_9 + * @arg @ref LL_RI_PIN_10 + * @arg @ref LL_RI_PIN_11 + * @arg @ref LL_RI_PIN_12 + * @arg @ref LL_RI_PIN_13 + * @arg @ref LL_RI_PIN_14 + * @arg @ref LL_RI_PIN_15 + * @arg @ref LL_RI_PIN_ALL + * @retval None + */ +__STATIC_INLINE void LL_RI_IdentifySamplingCapacitorIO(uint32_t Port, uint32_t Pin) +{ + __IO uint32_t *reg = (__IO uint32_t *)(uint32_t)((uint32_t)(&RI->CICR1) + ((Port * 3U) << 2)); + SET_BIT(*reg, Pin); +} +#endif /* RI_CICR1_PA */ + +/** + * @} + */ + +/** @defgroup SYSTEM_LL_EF_FLASH FLASH + * @{ + */ + +/** + * @brief Set FLASH Latency + * @note Latetency can be modified only when ACC64 is set. (through function @ref LL_FLASH_Enable64bitAccess) + * @rmtoll FLASH_ACR LATENCY LL_FLASH_SetLatency + * @param Latency This parameter can be one of the following values: + * @arg @ref LL_FLASH_LATENCY_0 + * @arg @ref LL_FLASH_LATENCY_1 + * @retval None + */ +__STATIC_INLINE void LL_FLASH_SetLatency(uint32_t Latency) +{ + MODIFY_REG(FLASH->ACR, FLASH_ACR_LATENCY, Latency); +} + +/** + * @brief Get FLASH Latency + * @rmtoll FLASH_ACR LATENCY LL_FLASH_GetLatency + * @retval Returned value can be one of the following values: + * @arg @ref LL_FLASH_LATENCY_0 + * @arg @ref LL_FLASH_LATENCY_1 + */ +__STATIC_INLINE uint32_t LL_FLASH_GetLatency(void) +{ + return (uint32_t)(READ_BIT(FLASH->ACR, FLASH_ACR_LATENCY)); +} + +/** + * @brief Enable Prefetch + * @note Prefetch can be enabled only when ACC64 is set. (through function @ref LL_FLASH_Enable64bitAccess) + * @rmtoll FLASH_ACR PRFTEN LL_FLASH_EnablePrefetch + * @retval None + */ +__STATIC_INLINE void LL_FLASH_EnablePrefetch(void) +{ + SET_BIT(FLASH->ACR, FLASH_ACR_PRFTEN); +} + +/** + * @brief Disable Prefetch + * @note Prefetch can be disabled only when ACC64 is set. (through function @ref LL_FLASH_Enable64bitAccess) + * @rmtoll FLASH_ACR PRFTEN LL_FLASH_DisablePrefetch + * @retval None + */ +__STATIC_INLINE void LL_FLASH_DisablePrefetch(void) +{ + CLEAR_BIT(FLASH->ACR, FLASH_ACR_PRFTEN); +} + +/** + * @brief Check if Prefetch buffer is enabled + * @rmtoll FLASH_ACR PRFTEN LL_FLASH_IsPrefetchEnabled + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_FLASH_IsPrefetchEnabled(void) +{ + return (READ_BIT(FLASH->ACR, FLASH_ACR_PRFTEN) == (FLASH_ACR_PRFTEN)); +} + +/** + * @brief Enable 64-bit access + * @rmtoll FLASH_ACR ACC64 LL_FLASH_Enable64bitAccess + * @retval None + */ +__STATIC_INLINE void LL_FLASH_Enable64bitAccess(void) +{ + SET_BIT(FLASH->ACR, FLASH_ACR_ACC64); +} + +/** + * @brief Disable 64-bit access + * @rmtoll FLASH_ACR ACC64 LL_FLASH_Disable64bitAccess + * @retval None + */ +__STATIC_INLINE void LL_FLASH_Disable64bitAccess(void) +{ + CLEAR_BIT(FLASH->ACR, FLASH_ACR_ACC64); +} + +/** + * @brief Check if 64-bit access is enabled + * @rmtoll FLASH_ACR ACC64 LL_FLASH_Is64bitAccessEnabled + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_FLASH_Is64bitAccessEnabled(void) +{ + return (READ_BIT(FLASH->ACR, FLASH_ACR_ACC64) == (FLASH_ACR_ACC64)); +} + + +/** + * @brief Enable Flash Power-down mode during run mode or Low-power run mode + * @note Flash memory can be put in power-down mode only when the code is executed + * from RAM + * @note Flash must not be accessed when power down is enabled + * @note Flash must not be put in power-down while a program or an erase operation + * is on-going + * @rmtoll FLASH_ACR RUN_PD LL_FLASH_EnableRunPowerDown\n + * FLASH_PDKEYR PDKEY1 LL_FLASH_EnableRunPowerDown\n + * FLASH_PDKEYR PDKEY2 LL_FLASH_EnableRunPowerDown + * @retval None + */ +__STATIC_INLINE void LL_FLASH_EnableRunPowerDown(void) +{ + /* Following values must be written consecutively to unlock the RUN_PD bit in + FLASH_ACR */ + WRITE_REG(FLASH->PDKEYR, FLASH_PDKEY1); + WRITE_REG(FLASH->PDKEYR, FLASH_PDKEY2); + SET_BIT(FLASH->ACR, FLASH_ACR_RUN_PD); +} + +/** + * @brief Disable Flash Power-down mode during run mode or Low-power run mode + * @rmtoll FLASH_ACR RUN_PD LL_FLASH_DisableRunPowerDown\n + * FLASH_PDKEYR PDKEY1 LL_FLASH_DisableRunPowerDown\n + * FLASH_PDKEYR PDKEY2 LL_FLASH_DisableRunPowerDown + * @retval None + */ +__STATIC_INLINE void LL_FLASH_DisableRunPowerDown(void) +{ + /* Following values must be written consecutively to unlock the RUN_PD bit in + FLASH_ACR */ + WRITE_REG(FLASH->PDKEYR, FLASH_PDKEY1); + WRITE_REG(FLASH->PDKEYR, FLASH_PDKEY2); + CLEAR_BIT(FLASH->ACR, FLASH_ACR_RUN_PD); +} + +/** + * @brief Enable Flash Power-down mode during Sleep or Low-power sleep mode + * @note Flash must not be put in power-down while a program or an erase operation + * is on-going + * @rmtoll FLASH_ACR SLEEP_PD LL_FLASH_EnableSleepPowerDown + * @retval None + */ +__STATIC_INLINE void LL_FLASH_EnableSleepPowerDown(void) +{ + SET_BIT(FLASH->ACR, FLASH_ACR_SLEEP_PD); +} + +/** + * @brief Disable Flash Power-down mode during Sleep or Low-power sleep mode + * @rmtoll FLASH_ACR SLEEP_PD LL_FLASH_DisableSleepPowerDown + * @retval None + */ +__STATIC_INLINE void LL_FLASH_DisableSleepPowerDown(void) +{ + CLEAR_BIT(FLASH->ACR, FLASH_ACR_SLEEP_PD); +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined (FLASH) || defined (SYSCFG) || defined (DBGMCU) || defined(RI) */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32L1xx_LL_SYSTEM_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_ll_tim.h b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_ll_tim.h new file mode 100755 index 0000000..ce89e28 --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_ll_tim.h @@ -0,0 +1,3331 @@ +/** + ****************************************************************************** + * @file stm32l1xx_ll_tim.h + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief Header file of TIM LL module. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L1xx_LL_TIM_H +#define __STM32L1xx_LL_TIM_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx.h" + +/** @addtogroup STM32L1xx_LL_Driver + * @{ + */ + +#if defined (TIM2) || defined (TIM3) || defined (TIM4) || defined (TIM5) || defined (TIM9) || defined (TIM10) || defined (TIM11) || defined (TIM6) || defined (TIM7) + +/** @defgroup TIM_LL TIM + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/** @defgroup TIM_LL_Private_Variables TIM Private Variables + * @{ + */ +static const uint8_t OFFSET_TAB_CCMRx[] = +{ + 0x00U, /* 0: TIMx_CH1 */ + 0x00U, /* 1: NA */ + 0x00U, /* 2: TIMx_CH2 */ + 0x00U, /* 3: NA */ + 0x04U, /* 4: TIMx_CH3 */ + 0x00U, /* 5: NA */ + 0x04U /* 6: TIMx_CH4 */ +}; + +static const uint8_t SHIFT_TAB_OCxx[] = +{ + 0U, /* 0: OC1M, OC1FE, OC1PE */ + 0U, /* 1: - NA */ + 8U, /* 2: OC2M, OC2FE, OC2PE */ + 0U, /* 3: - NA */ + 0U, /* 4: OC3M, OC3FE, OC3PE */ + 0U, /* 5: - NA */ + 8U /* 6: OC4M, OC4FE, OC4PE */ +}; + +static const uint8_t SHIFT_TAB_ICxx[] = +{ + 0U, /* 0: CC1S, IC1PSC, IC1F */ + 0U, /* 1: - NA */ + 8U, /* 2: CC2S, IC2PSC, IC2F */ + 0U, /* 3: - NA */ + 0U, /* 4: CC3S, IC3PSC, IC3F */ + 0U, /* 5: - NA */ + 8U /* 6: CC4S, IC4PSC, IC4F */ +}; + +static const uint8_t SHIFT_TAB_CCxP[] = +{ + 0U, /* 0: CC1P */ + 0U, /* 1: NA */ + 4U, /* 2: CC2P */ + 0U, /* 3: NA */ + 8U, /* 4: CC3P */ + 0U, /* 5: NA */ + 12U /* 6: CC4P */ +}; + +/** + * @} + */ + + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup TIM_LL_Private_Constants TIM Private Constants + * @{ + */ + + +#define TIMx_OR_RMP_SHIFT ((uint32_t)16U) +#define TIMx_OR_RMP_MASK ((uint32_t)0x0000FFFFU) +#define TIM_OR_RMP_MASK ((uint32_t)((TIM_OR_TI1RMP | TIM_OR_ETR_RMP | TIM_OR_TI1_RMP_RI) << TIMx_OR_RMP_SHIFT)) +#define TIM9_OR_RMP_MASK ((uint32_t)((TIM_OR_TI1RMP | TIM9_OR_ITR1_RMP) << TIMx_OR_RMP_SHIFT)) +#define TIM2_OR_RMP_MASK ((uint32_t)(TIM2_OR_ITR1_RMP << TIMx_OR_RMP_SHIFT)) +#define TIM3_OR_RMP_MASK ((uint32_t)(TIM3_OR_ITR2_RMP << TIMx_OR_RMP_SHIFT)) + + + +/** + * @} + */ + + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup TIM_LL_Private_Macros TIM Private Macros + * @{ + */ +/** @brief Convert channel id into channel index. + * @param __CHANNEL__ This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval none + */ +#define TIM_GET_CHANNEL_INDEX( __CHANNEL__) \ +(((__CHANNEL__) == LL_TIM_CHANNEL_CH1) ? 0U :\ +((__CHANNEL__) == LL_TIM_CHANNEL_CH2) ? 2U :\ +((__CHANNEL__) == LL_TIM_CHANNEL_CH3) ? 4U : 6U) + +/** + * @} + */ + + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup TIM_LL_ES_INIT TIM Exported Init structure + * @{ + */ + +/** + * @brief TIM Time Base configuration structure definition. + */ +typedef struct +{ + uint16_t Prescaler; /*!< Specifies the prescaler value used to divide the TIM clock. + This parameter can be a number between Min_Data=0x0000 and Max_Data=0xFFFF. + + This feature can be modified afterwards using unitary function @ref LL_TIM_SetPrescaler().*/ + + uint32_t CounterMode; /*!< Specifies the counter mode. + This parameter can be a value of @ref TIM_LL_EC_COUNTERMODE. + + This feature can be modified afterwards using unitary function @ref LL_TIM_SetCounterMode().*/ + + uint32_t Autoreload; /*!< Specifies the auto reload value to be loaded into the active + Auto-Reload Register at the next update event. + This parameter must be a number between Min_Data=0x0000 and Max_Data=0xFFFF. + Some timer instances may support 32 bits counters. In that case this parameter must be a number between 0x0000 and 0xFFFFFFFF. + + This feature can be modified afterwards using unitary function @ref LL_TIM_SetAutoReload().*/ + + uint32_t ClockDivision; /*!< Specifies the clock division. + This parameter can be a value of @ref TIM_LL_EC_CLOCKDIVISION. + + This feature can be modified afterwards using unitary function @ref LL_TIM_SetClockDivision().*/ +} LL_TIM_InitTypeDef; + +/** + * @brief TIM Output Compare configuration structure definition. + */ +typedef struct +{ + uint32_t OCMode; /*!< Specifies the output mode. + This parameter can be a value of @ref TIM_LL_EC_OCMODE. + + This feature can be modified afterwards using unitary function @ref LL_TIM_OC_SetMode().*/ + + uint32_t OCState; /*!< Specifies the TIM Output Compare state. + This parameter can be a value of @ref TIM_LL_EC_OCSTATE. + + This feature can be modified afterwards using unitary functions @ref LL_TIM_CC_EnableChannel() or @ref LL_TIM_CC_DisableChannel().*/ + + uint32_t CompareValue; /*!< Specifies the Compare value to be loaded into the Capture Compare Register. + This parameter can be a number between Min_Data=0x0000 and Max_Data=0xFFFF. + + This feature can be modified afterwards using unitary function LL_TIM_OC_SetCompareCHx (x=1..6).*/ + + uint32_t OCPolarity; /*!< Specifies the output polarity. + This parameter can be a value of @ref TIM_LL_EC_OCPOLARITY. + + This feature can be modified afterwards using unitary function @ref LL_TIM_OC_SetPolarity().*/ + +} LL_TIM_OC_InitTypeDef; + +/** + * @brief TIM Input Capture configuration structure definition. + */ + +typedef struct +{ + + uint32_t ICPolarity; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_LL_EC_IC_POLARITY. + + This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetPolarity().*/ + + uint32_t ICActiveInput; /*!< Specifies the input. + This parameter can be a value of @ref TIM_LL_EC_ACTIVEINPUT. + + This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetActiveInput().*/ + + uint32_t ICPrescaler; /*!< Specifies the Input Capture Prescaler. + This parameter can be a value of @ref TIM_LL_EC_ICPSC. + + This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetPrescaler().*/ + + uint32_t ICFilter; /*!< Specifies the input capture filter. + This parameter can be a value of @ref TIM_LL_EC_IC_FILTER. + + This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetFilter().*/ +} LL_TIM_IC_InitTypeDef; + + +/** + * @brief TIM Encoder interface configuration structure definition. + */ +typedef struct +{ + uint32_t EncoderMode; /*!< Specifies the encoder resolution (x2 or x4). + This parameter can be a value of @ref TIM_LL_EC_ENCODERMODE. + + This feature can be modified afterwards using unitary function @ref LL_TIM_SetEncoderMode().*/ + + uint32_t IC1Polarity; /*!< Specifies the active edge of TI1 input. + This parameter can be a value of @ref TIM_LL_EC_IC_POLARITY. + + This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetPolarity().*/ + + uint32_t IC1ActiveInput; /*!< Specifies the TI1 input source + This parameter can be a value of @ref TIM_LL_EC_ACTIVEINPUT. + + This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetActiveInput().*/ + + uint32_t IC1Prescaler; /*!< Specifies the TI1 input prescaler value. + This parameter can be a value of @ref TIM_LL_EC_ICPSC. + + This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetPrescaler().*/ + + uint32_t IC1Filter; /*!< Specifies the TI1 input filter. + This parameter can be a value of @ref TIM_LL_EC_IC_FILTER. + + This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetFilter().*/ + + uint32_t IC2Polarity; /*!< Specifies the active edge of TI2 input. + This parameter can be a value of @ref TIM_LL_EC_IC_POLARITY. + + This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetPolarity().*/ + + uint32_t IC2ActiveInput; /*!< Specifies the TI2 input source + This parameter can be a value of @ref TIM_LL_EC_ACTIVEINPUT. + + This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetActiveInput().*/ + + uint32_t IC2Prescaler; /*!< Specifies the TI2 input prescaler value. + This parameter can be a value of @ref TIM_LL_EC_ICPSC. + + This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetPrescaler().*/ + + uint32_t IC2Filter; /*!< Specifies the TI2 input filter. + This parameter can be a value of @ref TIM_LL_EC_IC_FILTER. + + This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetFilter().*/ + +} LL_TIM_ENCODER_InitTypeDef; + + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup TIM_LL_Exported_Constants TIM Exported Constants + * @{ + */ + +/** @defgroup TIM_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_TIM_ReadReg function. + * @{ + */ +#define LL_TIM_SR_UIF TIM_SR_UIF /*!< Update interrupt flag */ +#define LL_TIM_SR_CC1IF TIM_SR_CC1IF /*!< Capture/compare 1 interrupt flag */ +#define LL_TIM_SR_CC2IF TIM_SR_CC2IF /*!< Capture/compare 2 interrupt flag */ +#define LL_TIM_SR_CC3IF TIM_SR_CC3IF /*!< Capture/compare 3 interrupt flag */ +#define LL_TIM_SR_CC4IF TIM_SR_CC4IF /*!< Capture/compare 4 interrupt flag */ +#define LL_TIM_SR_TIF TIM_SR_TIF /*!< Trigger interrupt flag */ +#define LL_TIM_SR_CC1OF TIM_SR_CC1OF /*!< Capture/Compare 1 overcapture flag */ +#define LL_TIM_SR_CC2OF TIM_SR_CC2OF /*!< Capture/Compare 2 overcapture flag */ +#define LL_TIM_SR_CC3OF TIM_SR_CC3OF /*!< Capture/Compare 3 overcapture flag */ +#define LL_TIM_SR_CC4OF TIM_SR_CC4OF /*!< Capture/Compare 4 overcapture flag */ +/** + * @} + */ + +/** @defgroup TIM_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_TIM_ReadReg and LL_TIM_WriteReg functions. + * @{ + */ +#define LL_TIM_DIER_UIE TIM_DIER_UIE /*!< Update interrupt enable */ +#define LL_TIM_DIER_CC1IE TIM_DIER_CC1IE /*!< Capture/compare 1 interrupt enable */ +#define LL_TIM_DIER_CC2IE TIM_DIER_CC2IE /*!< Capture/compare 2 interrupt enable */ +#define LL_TIM_DIER_CC3IE TIM_DIER_CC3IE /*!< Capture/compare 3 interrupt enable */ +#define LL_TIM_DIER_CC4IE TIM_DIER_CC4IE /*!< Capture/compare 4 interrupt enable */ +#define LL_TIM_DIER_TIE TIM_DIER_TIE /*!< Trigger interrupt enable */ +/** + * @} + */ + +/** @defgroup TIM_LL_EC_UPDATESOURCE Update Source + * @{ + */ +#define LL_TIM_UPDATESOURCE_REGULAR ((uint32_t)0x00000000U) /*!< Counter overflow/underflow, Setting the UG bit or Update generation through the slave mode controller generates an update request */ +#define LL_TIM_UPDATESOURCE_COUNTER TIM_CR1_URS /*!< Only counter overflow/underflow generates an update request */ +/** + * @} + */ + +/** @defgroup TIM_LL_EC_ONEPULSEMODE One Pulse Mode + * @{ + */ +#define LL_TIM_ONEPULSEMODE_SINGLE TIM_CR1_OPM /*!< Counter is not stopped at update event */ +#define LL_TIM_ONEPULSEMODE_REPETITIVE ((uint32_t)0x00000000U) /*!< Counter stops counting at the next update event */ +/** + * @} + */ + +/** @defgroup TIM_LL_EC_COUNTERMODE Counter Mode + * @{ + */ +#define LL_TIM_COUNTERMODE_UP ((uint32_t)0x00000000U) /*!TIMx_CCRy else active.*/ +#define LL_TIM_OCMODE_PWM2 (TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_0) /*!TIMx_CCRy else inactive*/ +/** + * @} + */ + +/** @defgroup TIM_LL_EC_OCPOLARITY Output Configuration Polarity + * @{ + */ +#define LL_TIM_OCPOLARITY_HIGH ((uint32_t)0x00000000U) /*!< OCxactive high*/ +#define LL_TIM_OCPOLARITY_LOW TIM_CCER_CC1P /*!< OCxactive low*/ +/** + * @} + */ + + + +/** @defgroup TIM_LL_EC_ACTIVEINPUT Active Input Selection + * @{ + */ +#define LL_TIM_ACTIVEINPUT_DIRECTTI (uint32_t)(TIM_CCMR1_CC1S_0 << 16U) /*!< ICx is mapped on TIx */ +#define LL_TIM_ACTIVEINPUT_INDIRECTTI (uint32_t)(TIM_CCMR1_CC1S_1 << 16U) /*!< ICx is mapped on TIy */ +#define LL_TIM_ACTIVEINPUT_TRC (uint32_t)(TIM_CCMR1_CC1S << 16U) /*!< ICx is mapped on TRC */ +/** + * @} + */ + +/** @defgroup TIM_LL_EC_ICPSC Input Configuration Prescaler + * @{ + */ +#define LL_TIM_ICPSC_DIV1 ((uint32_t)0x00000000U) /*!< No prescaler, capture is done each time an edge is detected on the capture input */ +#define LL_TIM_ICPSC_DIV2 (uint32_t)(TIM_CCMR1_IC1PSC_0 << 16U) /*!< Capture is done once every 2 events */ +#define LL_TIM_ICPSC_DIV4 (uint32_t)(TIM_CCMR1_IC1PSC_1 << 16U) /*!< Capture is done once every 4 events */ +#define LL_TIM_ICPSC_DIV8 (uint32_t)(TIM_CCMR1_IC1PSC << 16U) /*!< Capture is done once every 8 events */ +/** + * @} + */ + +/** @defgroup TIM_LL_EC_IC_FILTER Input Configuration Filter + * @{ + */ +#define LL_TIM_IC_FILTER_FDIV1 ((uint32_t)0x00000000U) /*!< No filter, sampling is done at fDTS */ +#define LL_TIM_IC_FILTER_FDIV1_N2 (uint32_t)(TIM_CCMR1_IC1F_0 << 16U) /*!< fSAMPLING=fCK_INT, N=2 */ +#define LL_TIM_IC_FILTER_FDIV1_N4 (uint32_t)(TIM_CCMR1_IC1F_1 << 16U) /*!< fSAMPLING=fCK_INT, N=4 */ +#define LL_TIM_IC_FILTER_FDIV1_N8 (uint32_t)((TIM_CCMR1_IC1F_1 | TIM_CCMR1_IC1F_0) << 16U) /*!< fSAMPLING=fCK_INT, N=8 */ +#define LL_TIM_IC_FILTER_FDIV2_N6 (uint32_t)(TIM_CCMR1_IC1F_2 << 16U) /*!< fSAMPLING=fDTS/2, N=6 */ +#define LL_TIM_IC_FILTER_FDIV2_N8 (uint32_t)((TIM_CCMR1_IC1F_2 | TIM_CCMR1_IC1F_0) << 16U) /*!< fSAMPLING=fDTS/2, N=8 */ +#define LL_TIM_IC_FILTER_FDIV4_N6 (uint32_t)((TIM_CCMR1_IC1F_2 | TIM_CCMR1_IC1F_1) << 16U) /*!< fSAMPLING=fDTS/4, N=6 */ +#define LL_TIM_IC_FILTER_FDIV4_N8 (uint32_t)((TIM_CCMR1_IC1F_2 | TIM_CCMR1_IC1F_1 | TIM_CCMR1_IC1F_0) << 16U) /*!< fSAMPLING=fDTS/4, N=8 */ +#define LL_TIM_IC_FILTER_FDIV8_N6 (uint32_t)(TIM_CCMR1_IC1F_3 << 16U) /*!< fSAMPLING=fDTS/8, N=6 */ +#define LL_TIM_IC_FILTER_FDIV8_N8 (uint32_t)((TIM_CCMR1_IC1F_3 | TIM_CCMR1_IC1F_0) << 16U) /*!< fSAMPLING=fDTS/8, N=8 */ +#define LL_TIM_IC_FILTER_FDIV16_N5 (uint32_t)((TIM_CCMR1_IC1F_3 | TIM_CCMR1_IC1F_1) << 16U) /*!< fSAMPLING=fDTS/16, N=5 */ +#define LL_TIM_IC_FILTER_FDIV16_N6 (uint32_t)((TIM_CCMR1_IC1F_3 | TIM_CCMR1_IC1F_1 | TIM_CCMR1_IC1F_0) << 16U) /*!< fSAMPLING=fDTS/16, N=6 */ +#define LL_TIM_IC_FILTER_FDIV16_N8 (uint32_t)((TIM_CCMR1_IC1F_3 | TIM_CCMR1_IC1F_2) << 16U) /*!< fSAMPLING=fDTS/16, N=8 */ +#define LL_TIM_IC_FILTER_FDIV32_N5 (uint32_t)((TIM_CCMR1_IC1F_3 | TIM_CCMR1_IC1F_2 | TIM_CCMR1_IC1F_0) << 16U) /*!< fSAMPLING=fDTS/32, N=5 */ +#define LL_TIM_IC_FILTER_FDIV32_N6 (uint32_t)((TIM_CCMR1_IC1F_3 | TIM_CCMR1_IC1F_2 | TIM_CCMR1_IC1F_1) << 16U) /*!< fSAMPLING=fDTS/32, N=6 */ +#define LL_TIM_IC_FILTER_FDIV32_N8 (uint32_t)(TIM_CCMR1_IC1F << 16U) /*!< fSAMPLING=fDTS/32, N=8 */ +/** + * @} + */ + +/** @defgroup TIM_LL_EC_IC_POLARITY Input Configuration Polarity + * @{ + */ +#define LL_TIM_IC_POLARITY_RISING ((uint32_t)0x00000000U) /*!< The circuit is sensitive to TIxFP1 rising edge, TIxFP1 is not inverted */ +#define LL_TIM_IC_POLARITY_FALLING TIM_CCER_CC1P /*!< The circuit is sensitive to TIxFP1 falling edge, TIxFP1 is inverted */ +#define LL_TIM_IC_POLARITY_BOTHEDGE (TIM_CCER_CC1P | TIM_CCER_CC1NP) /*!< The circuit is sensitive to both TIxFP1 rising and falling edges, TIxFP1 is not inverted */ +/** + * @} + */ + +/** @defgroup TIM_LL_EC_CLOCKSOURCE Clock Source + * @{ + */ +#define LL_TIM_CLOCKSOURCE_INTERNAL ((uint32_t)0x00000000U) /*!< The timer is clocked by the internal clock provided from the RCC */ +#define LL_TIM_CLOCKSOURCE_EXT_MODE1 (TIM_SMCR_SMS_2 | TIM_SMCR_SMS_1 | TIM_SMCR_SMS_0 ) /*!< Counter counts at each rising or falling edge on a selected inpu t*/ +#define LL_TIM_CLOCKSOURCE_EXT_MODE2 TIM_SMCR_ECE /*!< Counter counts at each rising or falling edge on the external trigger input ETR */ +/** + * @} + */ + +/** @defgroup TIM_LL_EC_ENCODERMODE Encoder Mode + * @{ + */ +#define LL_TIM_ENCODERMODE_X2_TI1 TIM_SMCR_SMS_0 /*!< Encoder mode 1 - Counter counts up/down on TI2FP2 edge depending on TI1FP1 level */ +#define LL_TIM_ENCODERMODE_X2_TI2 TIM_SMCR_SMS_1 /*!< Encoder mode 2 - Counter counts up/down on TI1FP1 edge depending on TI2FP2 level */ +#define LL_TIM_ENCODERMODE_X4_TI12 (TIM_SMCR_SMS_1 | TIM_SMCR_SMS_0) /*!< Encoder mode 3 - Counter counts up/down on both TI1FP1 and TI2FP2 edges depending on the level of the other input l */ +/** + * @} + */ + +/** @defgroup TIM_LL_EC_TRGO Trigger Output + * @{ + */ +#define LL_TIM_TRGO_RESET ((uint32_t)0x00000000U) /*!< UG bit from the TIMx_EGR register is used as trigger output */ +#define LL_TIM_TRGO_ENABLE TIM_CR2_MMS_0 /*!< Counter Enable signal (CNT_EN) is used as trigger output */ +#define LL_TIM_TRGO_UPDATE TIM_CR2_MMS_1 /*!< Update event is used as trigger output */ +#define LL_TIM_TRGO_CC1IF (TIM_CR2_MMS_1 | TIM_CR2_MMS_0) /*!< CC1 capture or a compare match is used as trigger output */ +#define LL_TIM_TRGO_OC1REF TIM_CR2_MMS_2 /*!< OC1REF signal is used as trigger output */ +#define LL_TIM_TRGO_OC2REF (TIM_CR2_MMS_2 | TIM_CR2_MMS_0) /*!< OC2REF signal is used as trigger output */ +#define LL_TIM_TRGO_OC3REF (TIM_CR2_MMS_2 | TIM_CR2_MMS_1) /*!< OC3REF signal is used as trigger output */ +#define LL_TIM_TRGO_OC4REF (TIM_CR2_MMS_2 | TIM_CR2_MMS_1 | TIM_CR2_MMS_0) /*!< OC4REF signal is used as trigger output */ +/** + * @} + */ + + +/** @defgroup TIM_LL_EC_SLAVEMODE Slave Mode + * @{ + */ +#define LL_TIM_SLAVEMODE_DISABLED ((uint32_t)0x00000000U) /*!< Slave mode disabled */ +#define LL_TIM_SLAVEMODE_RESET TIM_SMCR_SMS_2 /*!< Reset Mode - Rising edge of the selected trigger input (TRGI) reinitializes the counter */ +#define LL_TIM_SLAVEMODE_GATED (TIM_SMCR_SMS_2 | TIM_SMCR_SMS_0) /*!< Gated Mode - The counter clock is enabled when the trigger input (TRGI) is high */ +#define LL_TIM_SLAVEMODE_TRIGGER (TIM_SMCR_SMS_2 | TIM_SMCR_SMS_1) /*!< Trigger Mode - The counter starts at a rising edge of the trigger TRGI */ +/** + * @} + */ + +/** @defgroup TIM_LL_EC_TS Trigger Selection + * @{ + */ +#define LL_TIM_TS_ITR0 ((uint32_t)0x00000000U) /*!< Internal Trigger 0 (ITR0) is used as trigger input */ +#define LL_TIM_TS_ITR1 TIM_SMCR_TS_0 /*!< Internal Trigger 1 (ITR1) is used as trigger input */ +#define LL_TIM_TS_ITR2 TIM_SMCR_TS_1 /*!< Internal Trigger 2 (ITR2) is used as trigger input */ +#define LL_TIM_TS_ITR3 (TIM_SMCR_TS_0 | TIM_SMCR_TS_1) /*!< Internal Trigger 3 (ITR3) is used as trigger input */ +#define LL_TIM_TS_TI1F_ED TIM_SMCR_TS_2 /*!< TI1 Edge Detector (TI1F_ED) is used as trigger input */ +#define LL_TIM_TS_TI1FP1 (TIM_SMCR_TS_2 | TIM_SMCR_TS_0) /*!< Filtered Timer Input 1 (TI1FP1) is used as trigger input */ +#define LL_TIM_TS_TI2FP2 (TIM_SMCR_TS_2 | TIM_SMCR_TS_1) /*!< Filtered Timer Input 2 (TI12P2) is used as trigger input */ +#define LL_TIM_TS_ETRF TIM_SMCR_TS /*!< Filtered external Trigger (ETRF) is used as trigger input */ +/** + * @} + */ + +/** @defgroup TIM_LL_EC_ETR_POLARITY External Trigger Polarity + * @{ + */ +#define LL_TIM_ETR_POLARITY_NONINVERTED ((uint32_t)0x00000000U) /*!< ETR is non-inverted, active at high level or rising edge */ +#define LL_TIM_ETR_POLARITY_INVERTED TIM_SMCR_ETP /*!< ETR is inverted, active at low level or falling edge */ +/** + * @} + */ + +/** @defgroup TIM_LL_EC_ETR_PRESCALER External Trigger Prescaler + * @{ + */ +#define LL_TIM_ETR_PRESCALER_DIV1 ((uint32_t)0x00000000U) /*!< ETR prescaler OFF */ +#define LL_TIM_ETR_PRESCALER_DIV2 TIM_SMCR_ETPS_0 /*!< ETR frequency is divided by 2 */ +#define LL_TIM_ETR_PRESCALER_DIV4 TIM_SMCR_ETPS_1 /*!< ETR frequency is divided by 4 */ +#define LL_TIM_ETR_PRESCALER_DIV8 TIM_SMCR_ETPS /*!< ETR frequency is divided by 8 */ +/** + * @} + */ + +/** @defgroup TIM_LL_EC_ETR_FILTER External Trigger Filter + * @{ + */ +#define LL_TIM_ETR_FILTER_FDIV1 ((uint32_t)0x00000000U) /*!< No filter, sampling is done at fDTS */ +#define LL_TIM_ETR_FILTER_FDIV1_N2 TIM_SMCR_ETF_0 /*!< fSAMPLING=fCK_INT, N=2 */ +#define LL_TIM_ETR_FILTER_FDIV1_N4 TIM_SMCR_ETF_1 /*!< fSAMPLING=fCK_INT, N=4 */ +#define LL_TIM_ETR_FILTER_FDIV1_N8 (TIM_SMCR_ETF_1 | TIM_SMCR_ETF_0) /*!< fSAMPLING=fCK_INT, N=8 */ +#define LL_TIM_ETR_FILTER_FDIV2_N6 TIM_SMCR_ETF_2 /*!< fSAMPLING=fDTS/2, N=6 */ +#define LL_TIM_ETR_FILTER_FDIV2_N8 (TIM_SMCR_ETF_2 | TIM_SMCR_ETF_0) /*!< fSAMPLING=fDTS/2, N=8 */ +#define LL_TIM_ETR_FILTER_FDIV4_N6 (TIM_SMCR_ETF_2 | TIM_SMCR_ETF_1 ) /*!< fSAMPLING=fDTS/4, N=6 */ +#define LL_TIM_ETR_FILTER_FDIV4_N8 (TIM_SMCR_ETF_2 | TIM_SMCR_ETF_1 | TIM_SMCR_ETF_0) /*!< fSAMPLING=fDTS/4, N=8 */ +#define LL_TIM_ETR_FILTER_FDIV8_N6 TIM_SMCR_ETF_3 /*!< fSAMPLING=fDTS/8, N=8 */ +#define LL_TIM_ETR_FILTER_FDIV8_N8 (TIM_SMCR_ETF_3 | TIM_SMCR_ETF_0) /*!< fSAMPLING=fDTS/16, N=5 */ +#define LL_TIM_ETR_FILTER_FDIV16_N5 (TIM_SMCR_ETF_3 | TIM_SMCR_ETF_1 ) /*!< fSAMPLING=fDTS/16, N=6 */ +#define LL_TIM_ETR_FILTER_FDIV16_N6 (TIM_SMCR_ETF_3 | TIM_SMCR_ETF_1 | TIM_SMCR_ETF_0) /*!< fSAMPLING=fDTS/16, N=8 */ +#define LL_TIM_ETR_FILTER_FDIV16_N8 (TIM_SMCR_ETF_3 | TIM_SMCR_ETF_2 ) /*!< fSAMPLING=fDTS/16, N=5 */ +#define LL_TIM_ETR_FILTER_FDIV32_N5 (TIM_SMCR_ETF_3 | TIM_SMCR_ETF_2 | TIM_SMCR_ETF_0) /*!< fSAMPLING=fDTS/32, N=5 */ +#define LL_TIM_ETR_FILTER_FDIV32_N6 (TIM_SMCR_ETF_3 | TIM_SMCR_ETF_2 | TIM_SMCR_ETF_1) /*!< fSAMPLING=fDTS/32, N=6 */ +#define LL_TIM_ETR_FILTER_FDIV32_N8 TIM_SMCR_ETF /*!< fSAMPLING=fDTS/32, N=8 */ +/** + * @} + */ + + + + + + + +/** @defgroup TIM_LL_EC_DMABURST_BASEADDR DMA Burst Base Address + * @{ + */ +#define LL_TIM_DMABURST_BASEADDR_CR1 ((uint32_t)0x00000000U) /*!< TIMx_CR1 register is the DMA base address for DMA burst */ +#define LL_TIM_DMABURST_BASEADDR_CR2 TIM_DCR_DBA_0 /*!< TIMx_CR2 register is the DMA base address for DMA burst */ +#define LL_TIM_DMABURST_BASEADDR_SMCR TIM_DCR_DBA_1 /*!< TIMx_SMCR register is the DMA base address for DMA burst */ +#define LL_TIM_DMABURST_BASEADDR_DIER (TIM_DCR_DBA_1 | TIM_DCR_DBA_0) /*!< TIMx_DIER register is the DMA base address for DMA burst */ +#define LL_TIM_DMABURST_BASEADDR_SR TIM_DCR_DBA_2 /*!< TIMx_SR register is the DMA base address for DMA burst */ +#define LL_TIM_DMABURST_BASEADDR_EGR (TIM_DCR_DBA_2 | TIM_DCR_DBA_0) /*!< TIMx_EGR register is the DMA base address for DMA burst */ +#define LL_TIM_DMABURST_BASEADDR_CCMR1 (TIM_DCR_DBA_2 | TIM_DCR_DBA_1) /*!< TIMx_CCMR1 register is the DMA base address for DMA burst */ +#define LL_TIM_DMABURST_BASEADDR_CCMR2 (TIM_DCR_DBA_2 | TIM_DCR_DBA_1 | TIM_DCR_DBA_0) /*!< TIMx_CCMR2 register is the DMA base address for DMA burst */ +#define LL_TIM_DMABURST_BASEADDR_CCER TIM_DCR_DBA_3 /*!< TIMx_CCER register is the DMA base address for DMA burst */ +#define LL_TIM_DMABURST_BASEADDR_CNT (TIM_DCR_DBA_3 | TIM_DCR_DBA_0) /*!< TIMx_CNT register is the DMA base address for DMA burst */ +#define LL_TIM_DMABURST_BASEADDR_PSC (TIM_DCR_DBA_3 | TIM_DCR_DBA_1) /*!< TIMx_PSC register is the DMA base address for DMA burst */ +#define LL_TIM_DMABURST_BASEADDR_ARR (TIM_DCR_DBA_3 | TIM_DCR_DBA_1 | TIM_DCR_DBA_0) /*!< TIMx_ARR register is the DMA base address for DMA burst */ +#define LL_TIM_DMABURST_BASEADDR_CCR1 (TIM_DCR_DBA_3 | TIM_DCR_DBA_2 | TIM_DCR_DBA_0) /*!< TIMx_CCR1 register is the DMA base address for DMA burst */ +#define LL_TIM_DMABURST_BASEADDR_CCR2 (TIM_DCR_DBA_3 | TIM_DCR_DBA_2 | TIM_DCR_DBA_1) /*!< TIMx_CCR2 register is the DMA base address for DMA burst */ +#define LL_TIM_DMABURST_BASEADDR_CCR3 (TIM_DCR_DBA_3 | TIM_DCR_DBA_2 | TIM_DCR_DBA_1 | TIM_DCR_DBA_0) /*!< TIMx_CCR3 register is the DMA base address for DMA burst */ +#define LL_TIM_DMABURST_BASEADDR_CCR4 TIM_DCR_DBA_4 /*!< TIMx_CCR4 register is the DMA base address for DMA burst */ +#define LL_TIM_DMABURST_BASEADDR_OR (TIM_DCR_DBA_4 | TIM_DCR_DBA_2 | TIM_DCR_DBA_0) /*!< TIMx_OR register is the DMA base address for DMA burst */ +/** + * @} + */ + +/** @defgroup TIM_LL_EC_DMABURST_LENGTH DMA Burst Length + * @{ + */ +#define LL_TIM_DMABURST_LENGTH_1TRANSFER ((uint32_t)0x00000000U) /*!< Transfer is done to 1 register starting from the DMA burst base address */ +#define LL_TIM_DMABURST_LENGTH_2TRANSFERS TIM_DCR_DBL_0 /*!< Transfer is done to 2 registers starting from the DMA burst base address */ +#define LL_TIM_DMABURST_LENGTH_3TRANSFERS TIM_DCR_DBL_1 /*!< Transfer is done to 3 registers starting from the DMA burst base address */ +#define LL_TIM_DMABURST_LENGTH_4TRANSFERS (TIM_DCR_DBL_1 | TIM_DCR_DBL_0) /*!< Transfer is done to 4 registers starting from the DMA burst base address */ +#define LL_TIM_DMABURST_LENGTH_5TRANSFERS TIM_DCR_DBL_2 /*!< Transfer is done to 5 registers starting from the DMA burst base address */ +#define LL_TIM_DMABURST_LENGTH_6TRANSFERS (TIM_DCR_DBL_2 | TIM_DCR_DBL_0) /*!< Transfer is done to 6 registers starting from the DMA burst base address */ +#define LL_TIM_DMABURST_LENGTH_7TRANSFERS (TIM_DCR_DBL_2 | TIM_DCR_DBL_1) /*!< Transfer is done to 7 registers starting from the DMA burst base address */ +#define LL_TIM_DMABURST_LENGTH_8TRANSFERS (TIM_DCR_DBL_2 | TIM_DCR_DBL_1 | TIM_DCR_DBL_0) /*!< Transfer is done to 1 registers starting from the DMA burst base address */ +#define LL_TIM_DMABURST_LENGTH_9TRANSFERS TIM_DCR_DBL_3 /*!< Transfer is done to 9 registers starting from the DMA burst base address */ +#define LL_TIM_DMABURST_LENGTH_10TRANSFERS (TIM_DCR_DBL_3 | TIM_DCR_DBL_0) /*!< Transfer is done to 10 registers starting from the DMA burst base address */ +#define LL_TIM_DMABURST_LENGTH_11TRANSFERS (TIM_DCR_DBL_3 | TIM_DCR_DBL_1) /*!< Transfer is done to 11 registers starting from the DMA burst base address */ +#define LL_TIM_DMABURST_LENGTH_12TRANSFERS (TIM_DCR_DBL_3 | TIM_DCR_DBL_1 | TIM_DCR_DBL_0) /*!< Transfer is done to 12 registers starting from the DMA burst base address */ +#define LL_TIM_DMABURST_LENGTH_13TRANSFERS (TIM_DCR_DBL_3 | TIM_DCR_DBL_2) /*!< Transfer is done to 13 registers starting from the DMA burst base address */ +#define LL_TIM_DMABURST_LENGTH_14TRANSFERS (TIM_DCR_DBL_3 | TIM_DCR_DBL_2 | TIM_DCR_DBL_0) /*!< Transfer is done to 14 registers starting from the DMA burst base address */ +#define LL_TIM_DMABURST_LENGTH_15TRANSFERS (TIM_DCR_DBL_3 | TIM_DCR_DBL_2 | TIM_DCR_DBL_1) /*!< Transfer is done to 15 registers starting from the DMA burst base address */ +#define LL_TIM_DMABURST_LENGTH_16TRANSFERS (TIM_DCR_DBL_3 | TIM_DCR_DBL_2 | TIM_DCR_DBL_1 | TIM_DCR_DBL_0) /*!< Transfer is done to 16 registers starting from the DMA burst base address */ +#define LL_TIM_DMABURST_LENGTH_17TRANSFERS TIM_DCR_DBL_4 /*!< Transfer is done to 17 registers starting from the DMA burst base address */ +#define LL_TIM_DMABURST_LENGTH_18TRANSFERS (TIM_DCR_DBL_4 | TIM_DCR_DBL_0) /*!< Transfer is done to 18 registers starting from the DMA burst base address */ +/** + * @} + */ + +/** @defgroup TIM_LL_EC_TIM10_TI1_RMP TIM10 input 1 remapping capability +* @{ +*/ +#define LL_TIM_TIM10_TI1_RMP_GPIO ((uint32_t)0x00000000U | TIM_OR_RMP_MASK) /*!< TIM10 channel1 is connected to GPIO */ +#define LL_TIM_TIM10_TI1_RMP_LSI (TIM_OR_TI1RMP_0 | TIM_OR_RMP_MASK) /*!< TIM10 channel1 is connected to LSI internal clock */ +#define LL_TIM_TIM10_TI1_RMP_LSE (TIM_OR_TI1RMP_1 | TIM_OR_RMP_MASK) /*!< TIM10 channel1 is connected to LSE internal clock */ +#define LL_TIM_TIM10_TI1_RMP_RTC (TIM_OR_TI1RMP_0 | TIM_OR_TI1RMP_1 | TIM_OR_RMP_MASK) /*!< TIM10 channel1 is connected to RTC wakeup interrupt signal */ +/** + * @} + */ + +/** @defgroup TIM_LL_EC_TIM10_ETR_RMP TIM10 ETR remap +* @{ +*/ +#define LL_TIM_TIM10_ETR_RMP_LSE ((uint32_t)0x00000000U | TIM_OR_RMP_MASK) /*!< TIM10 ETR input is connected to LSE */ +#define LL_TIM_TIM10_ETR_RMP_TIM9_TGO (TIM_OR_ETR_RMP | TIM_OR_RMP_MASK) /*!< TIM10 ETR input is connected to TIM9 TGO */ +/** + * @} + */ + +/** @defgroup TIM_LL_EC_TIM10_TI1_RMP_RI TIM10 Input 1 remap for Routing Interface (RI) +* @{ +*/ +#define LL_TIM_TIM10_TI1_RMP ((uint32_t)0x00000000U | TIM_OR_RMP_MASK) /*!< TIM10 Channel1 connection depends on TI1_RMP[1:0] bit values */ +#define LL_TIM_TIM10_TI1_RMP_RI (TIM_OR_TI1_RMP_RI | TIM_OR_RMP_MASK) /*!< TIM10 channel1 is connected to RI */ +/** + * @} + */ + +/** @defgroup TIM_LL_EC_TIM11_TI1_RMP TIM11 input 1 remapping capability +* @{ +*/ +#define LL_TIM_TIM11_TI1_RMP_GPIO ((uint32_t)0x00000000U | TIM_OR_RMP_MASK) /*!< TIM11 channel1 is connected to GPIO */ +#define LL_TIM_TIM11_TI1_RMP_MSI (TIM_OR_TI1RMP_0 | TIM_OR_RMP_MASK) /*!< TIM11 channel1 is connected to MSI internal clock */ +#define LL_TIM_TIM11_TI1_RMP_HSE_RTC (TIM_OR_TI1RMP_1 | TIM_OR_RMP_MASK) /*!< TIM11 channel1 is connected to HSE RTC clock */ +#define LL_TIM_TIM11_TI1_RMP_GPIO1 (TIM_OR_TI1RMP_0 | TIM_OR_TI1RMP_1 | TIM_OR_RMP_MASK) /*!< TIM11 channel1 is connected to GPIO */ +/** + * @} + */ + +/** @defgroup TIM_LL_EC_TIM11_ETR_RMP TIM11 ETR remap +* @{ +*/ +#define LL_TIM_TIM11_ETR_RMP_LSE ((uint32_t)0x00000000U | TIM_OR_RMP_MASK) /*!< TIM11 ETR input is connected to LSE */ +#define LL_TIM_TIM11_ETR_RMP_TIM9_TGO (TIM_OR_ETR_RMP | TIM_OR_RMP_MASK) /*!< TIM11 ETR input is connected to TIM9 TGO clock */ +/** + * @} + */ + +/** @defgroup TIM_LL_EC_TIM11_TI1_RMP_RI TIM11 Input 1 remap for Routing Interface (RI) +* @{ +*/ +#define LL_TIM_TIM11_TI1_RMP ((uint32_t)0x00000000U | TIM_OR_RMP_MASK) /*!< TIM11 Channel1 connection depends on TI1_RMP[1:0] bit values */ +#define LL_TIM_TIM11_TI1_RMP_RI (TIM_OR_TI1_RMP_RI | TIM_OR_RMP_MASK) /*!< TIM11 channel1 is connected to RI */ +/** + * @} + */ + +/** @defgroup TIM_LL_EC_TIM9_TI1_RMP TIM9 Input 1 remap +* @{ +*/ +#define LL_TIM_TIM9_TI1_RMP_GPIO ((uint32_t)0x00000000U | TIM9_OR_RMP_MASK) /*!< TIM9 channel1 is connected to GPIO */ +#define LL_TIM_TIM9_TI1_RMP_LSE (TIM_OR_TI1RMP_0 | TIM9_OR_RMP_MASK) /*!< TIM9 channel1 is connected to LSE internal clock */ +#define LL_TIM_TIM9_TI1_RMP_GPIO1 (TIM_OR_TI1RMP_1 | TIM9_OR_RMP_MASK) /*!< TIM9 channel1 is connected to GPIO */ +#define LL_TIM_TIM9_TI1_RMP_GPIO2 (TIM_OR_TI1RMP_0 | TIM_OR_TI1RMP_1 | TIM9_OR_RMP_MASK) /*!< TIM9 channel1 is connected to GPIO */ +/** + * @} + */ + +/** @defgroup TIM_LL_EC_TIM9_ITR1_RMP TIM9 ITR1 remap +* @{ +*/ +#define LL_TIM_TIM9_ITR1_RMP_TIM3_TGO ((uint32_t)0x00000000U | TIM9_OR_RMP_MASK) /*!< TIM9 channel1 is connected to TIM3 TGO signal */ +#define LL_TIM_TIM9_ITR1_RMP_TOUCH_IO (TIM9_OR_ITR1_RMP | TIM9_OR_RMP_MASK) /*!< TIM9 channel1 is connected to touch sensing I/O */ +/** + * @} + */ + +/** @defgroup TIM_LL_EC_TIM2_ITR1_RMP TIM2 internal trigger 1 remap +* @{ +*/ +#define LL_TIM_TIM2_TIR1_RMP_TIM10_OC ((uint32_t)0x00000000U | TIM9_OR_RMP_MASK) /*!< TIM2 ITR1 input is connected to TIM10 OC*/ +#define LL_TIM_TIM2_TIR1_RMP_TIM5_TGO (TIM2_OR_ITR1_RMP | TIM9_OR_RMP_MASK) /*!< TIM2 ITR1 input is connected to TIM5 TGO */ +/** + * @} + */ + +/** @defgroup TIM_LL_EC_TIM3_ITR2_RMP TIM3 internal trigger 2 remap +* @{ +*/ +#define LL_TIM_TIM3_TIR2_RMP_TIM11_OC ((uint32_t)0x00000000U | TIM9_OR_RMP_MASK) /*!< TIM3 ITR2 input is connected to TIM11 OC */ +#define LL_TIM_TIM3_TIR2_RMP_TIM5_TGO (TIM3_OR_ITR2_RMP | TIM9_OR_RMP_MASK) /*!< TIM3 ITR2 input is connected to TIM5 TGO */ +/** + * @} + */ + + +/** @defgroup TIM_LL_EC_OCREF_CLR_INT OCREF clear input selection + * @{ + */ +#define LL_TIM_OCREF_CLR_INT_OCREF_CLR ((uint32_t)0x00000000U ) /*!< OCREF_CLR_INT is connected to the OCREF_CLR input */ +#define LL_TIM_OCREF_CLR_INT_ETR TIM_SMCR_OCCS /*!< OCREF_CLR_INT is connected to ETRF */ +/** + * @} + */ + + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup TIM_LL_Exported_Macros TIM Exported Macros + * @{ + */ + +/** @defgroup TIM_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ +/** + * @brief Write a value in TIM register. + * @param __INSTANCE__ TIM Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_TIM_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in TIM register. + * @param __INSTANCE__ TIM Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_TIM_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** @defgroup TIM_LL_EM_Exported_Macros Exported_Macros + * @{ + */ + + +/** + * @brief HELPER macro calculating the prescaler value to achieve the required counter clock frequency. + * @note ex: @ref __LL_TIM_CALC_PSC (80000000, 1000000); + * @param __TIMCLK__ timer input clock frequency (in Hz) + * @param __CNTCLK__ counter clock frequency (in Hz) + * @retval Prescaler value (between Min_Data=0 and Max_Data=65535) + */ +#define __LL_TIM_CALC_PSC(__TIMCLK__, __CNTCLK__) \ + ((__TIMCLK__) >= (__CNTCLK__)) ? (uint32_t)((__TIMCLK__)/(__CNTCLK__) - 1U) : 0U + +/** + * @brief HELPER macro calculating the auto-reload value to achieve the required output signal frequency. + * @note ex: @ref __LL_TIM_CALC_ARR (1000000, @ref LL_TIM_GetPrescaler (), 10000); + * @param __TIMCLK__ timer input clock frequency (in Hz) + * @param __PSC__ prescaler + * @param __FREQ__ output signal frequency (in Hz) + * @retval Auto-reload value (between Min_Data=0 and Max_Data=65535) + */ +#define __LL_TIM_CALC_ARR(__TIMCLK__, __PSC__, __FREQ__) \ + (((__TIMCLK__)/((__PSC__) + 1U)) >= (__FREQ__)) ? ((__TIMCLK__)/((__FREQ__) * ((__PSC__) + 1U)) - 1U) : 0U + +/** + * @brief HELPER macro calculating the compare value required to achieve the required timer output compare active/inactive delay. + * @note ex: @ref __LL_TIM_CALC_DELAY (1000000, @ref LL_TIM_GetPrescaler (), 10); + * @param __TIMCLK__ timer input clock frequency (in Hz) + * @param __PSC__ prescaler + * @param __DELAY__ timer output compare active/inactive delay (in us) + * @retval Compare value (between Min_Data=0 and Max_Data=65535) + */ +#define __LL_TIM_CALC_DELAY(__TIMCLK__, __PSC__, __DELAY__) \ +((uint32_t)(((uint64_t)(__TIMCLK__) * (uint64_t)(__DELAY__)) \ + / ((uint64_t)1000000U * (uint64_t)((__PSC__) + 1U)))) + +/** + * @brief HELPER macro calculating the auto-reload value to achieve the required pulse duration (when the timer operates in one pulse mode). + * @note ex: @ref __LL_TIM_CALC_PULSE (1000000, @ref LL_TIM_GetPrescaler (), 10, 20); + * @param __TIMCLK__ timer input clock frequency (in Hz) + * @param __PSC__ prescaler + * @param __DELAY__ timer output compare active/inactive delay (in us) + * @param __PULSE__ pulse duration (in us) + * @retval Auto-reload value (between Min_Data=0 and Max_Data=65535) + */ +#define __LL_TIM_CALC_PULSE(__TIMCLK__, __PSC__, __DELAY__, __PULSE__) \ + ((uint32_t)(__LL_TIM_CALC_DELAY((__TIMCLK__), (__PSC__), (__PULSE__)) \ + + __LL_TIM_CALC_DELAY((__TIMCLK__), (__PSC__), (__DELAY__)))) + +/** + * @brief HELPER macro retrieving the ratio of the input capture prescaler + * @note ex: @ref __LL_TIM_GET_ICPSC_RATIO (@ref LL_TIM_IC_GetPrescaler ()); + * @param __ICPSC__ This parameter can be one of the following values: + * @arg @ref LL_TIM_ICPSC_DIV1 + * @arg @ref LL_TIM_ICPSC_DIV2 + * @arg @ref LL_TIM_ICPSC_DIV4 + * @arg @ref LL_TIM_ICPSC_DIV8 + * @retval Input capture prescaler ratio (1, 2, 4 or 8) + */ +#define __LL_TIM_GET_ICPSC_RATIO(__ICPSC__) \ + ((uint32_t)((uint32_t)0x01U << (((__ICPSC__) >> 16U) >> TIM_CCMR1_IC1PSC_Pos))) + + +/** + * @} + */ + + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup TIM_LL_Exported_Functions TIM Exported Functions + * @{ + */ + +/** @defgroup TIM_LL_EF_Time_Base Time Base configuration + * @{ + */ +/** + * @brief Enable timer counter. + * @rmtoll CR1 CEN LL_TIM_EnableCounter + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableCounter(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->CR1, TIM_CR1_CEN); +} + +/** + * @brief Disable timer counter. + * @rmtoll CR1 CEN LL_TIM_DisableCounter + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableCounter(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->CR1, TIM_CR1_CEN); +} + +/** + * @brief Indicates whether the timer counter is enabled. + * @rmtoll CR1 CEN LL_TIM_IsEnabledCounter + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledCounter(TIM_TypeDef *TIMx) +{ + return (READ_BIT(TIMx->CR1, TIM_CR1_CEN) == (TIM_CR1_CEN)); +} + +/** + * @brief Enable update event generation. + * @rmtoll CR1 UDIS LL_TIM_EnableUpdateEvent + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableUpdateEvent(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->CR1, TIM_CR1_UDIS); +} + +/** + * @brief Disable update event generation. + * @rmtoll CR1 UDIS LL_TIM_DisableUpdateEvent + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableUpdateEvent(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->CR1, TIM_CR1_UDIS); +} + +/** + * @brief Indicates whether update event generation is enabled. + * @rmtoll CR1 UDIS LL_TIM_IsEnabledUpdateEvent + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledUpdateEvent(TIM_TypeDef *TIMx) +{ + return (READ_BIT(TIMx->CR1, TIM_CR1_UDIS) == (TIM_CR1_UDIS)); +} + +/** + * @brief Set update event source + * @note Update event source set to LL_TIM_UPDATESOURCE_REGULAR: any of the following events + * generate an update interrupt or DMA request if enabled: + * - Counter overflow/underflow + * - Setting the UG bit + * - Update generation through the slave mode controller + * @note Update event source set to LL_TIM_UPDATESOURCE_COUNTER: only counter + * overflow/underflow generates an update interrupt or DMA request if enabled. + * @rmtoll CR1 URS LL_TIM_SetUpdateSource + * @param TIMx Timer instance + * @param UpdateSource This parameter can be one of the following values: + * @arg @ref LL_TIM_UPDATESOURCE_REGULAR + * @arg @ref LL_TIM_UPDATESOURCE_COUNTER + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetUpdateSource(TIM_TypeDef *TIMx, uint32_t UpdateSource) +{ + MODIFY_REG(TIMx->CR1, TIM_CR1_URS, UpdateSource); +} + +/** + * @brief Get actual event update source + * @rmtoll CR1 URS LL_TIM_GetUpdateSource + * @param TIMx Timer instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_UPDATESOURCE_REGULAR + * @arg @ref LL_TIM_UPDATESOURCE_COUNTER + */ +__STATIC_INLINE uint32_t LL_TIM_GetUpdateSource(TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_BIT(TIMx->CR1, TIM_CR1_URS)); +} + +/** + * @brief Set one pulse mode (one shot v.s. repetitive). + * @rmtoll CR1 OPM LL_TIM_SetOnePulseMode + * @param TIMx Timer instance + * @param OnePulseMode This parameter can be one of the following values: + * @arg @ref LL_TIM_ONEPULSEMODE_SINGLE + * @arg @ref LL_TIM_ONEPULSEMODE_REPETITIVE + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetOnePulseMode(TIM_TypeDef *TIMx, uint32_t OnePulseMode) +{ + MODIFY_REG(TIMx->CR1, TIM_CR1_OPM, OnePulseMode); +} + +/** + * @brief Get actual one pulse mode. + * @rmtoll CR1 OPM LL_TIM_GetOnePulseMode + * @param TIMx Timer instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_ONEPULSEMODE_SINGLE + * @arg @ref LL_TIM_ONEPULSEMODE_REPETITIVE + */ +__STATIC_INLINE uint32_t LL_TIM_GetOnePulseMode(TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_BIT(TIMx->CR1, TIM_CR1_OPM)); +} + +/** + * @brief Set the timer counter counting mode. + * @note Macro @ref IS_TIM_COUNTER_MODE_SELECT_INSTANCE(TIMx) can be used to + * check whether or not the counter mode selection feature is supported + * by a timer instance. + * @rmtoll CR1 DIR LL_TIM_SetCounterMode\n + * CR1 CMS LL_TIM_SetCounterMode + * @param TIMx Timer instance + * @param CounterMode This parameter can be one of the following values: + * @arg @ref LL_TIM_COUNTERMODE_UP + * @arg @ref LL_TIM_COUNTERMODE_DOWN + * @arg @ref LL_TIM_COUNTERMODE_CENTER_UP + * @arg @ref LL_TIM_COUNTERMODE_CENTER_DOWN + * @arg @ref LL_TIM_COUNTERMODE_CENTER_UP_DOWN + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetCounterMode(TIM_TypeDef *TIMx, uint32_t CounterMode) +{ + MODIFY_REG(TIMx->CR1, TIM_CR1_DIR | TIM_CR1_CMS, CounterMode); +} + +/** + * @brief Get actual counter mode. + * @note Macro @ref IS_TIM_COUNTER_MODE_SELECT_INSTANCE(TIMx) can be used to + * check whether or not the counter mode selection feature is supported + * by a timer instance. + * @rmtoll CR1 DIR LL_TIM_GetCounterMode\n + * CR1 CMS LL_TIM_GetCounterMode + * @param TIMx Timer instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_COUNTERMODE_UP + * @arg @ref LL_TIM_COUNTERMODE_DOWN + * @arg @ref LL_TIM_COUNTERMODE_CENTER_UP + * @arg @ref LL_TIM_COUNTERMODE_CENTER_DOWN + * @arg @ref LL_TIM_COUNTERMODE_CENTER_UP_DOWN + */ +__STATIC_INLINE uint32_t LL_TIM_GetCounterMode(TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_BIT(TIMx->CR1, TIM_CR1_DIR | TIM_CR1_CMS)); +} + +/** + * @brief Enable auto-reload (ARR) preload. + * @rmtoll CR1 ARPE LL_TIM_EnableARRPreload + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableARRPreload(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->CR1, TIM_CR1_ARPE); +} + +/** + * @brief Disable auto-reload (ARR) preload. + * @rmtoll CR1 ARPE LL_TIM_DisableARRPreload + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableARRPreload(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->CR1, TIM_CR1_ARPE); +} + +/** + * @brief Indicates whether auto-reload (ARR) preload is enabled. + * @rmtoll CR1 ARPE LL_TIM_IsEnabledARRPreload + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledARRPreload(TIM_TypeDef *TIMx) +{ + return (READ_BIT(TIMx->CR1, TIM_CR1_ARPE) == (TIM_CR1_ARPE)); +} + +/** + * @brief Set the division ratio between the timer clock and the sampling clock used by the dead-time generators (when supported) and the digital filters. + * @note Macro @ref IS_TIM_CLOCK_DIVISION_INSTANCE(TIMx) can be used to check + * whether or not the clock division feature is supported by the timer + * instance. + * @rmtoll CR1 CKD LL_TIM_SetClockDivision + * @param TIMx Timer instance + * @param ClockDivision This parameter can be one of the following values: + * @arg @ref LL_TIM_CLOCKDIVISION_DIV1 + * @arg @ref LL_TIM_CLOCKDIVISION_DIV2 + * @arg @ref LL_TIM_CLOCKDIVISION_DIV4 + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetClockDivision(TIM_TypeDef *TIMx, uint32_t ClockDivision) +{ + MODIFY_REG(TIMx->CR1, TIM_CR1_CKD, ClockDivision); +} + +/** + * @brief Get the actual division ratio between the timer clock and the sampling clock used by the dead-time generators (when supported) and the digital filters. + * @note Macro @ref IS_TIM_CLOCK_DIVISION_INSTANCE(TIMx) can be used to check + * whether or not the clock division feature is supported by the timer + * instance. + * @rmtoll CR1 CKD LL_TIM_GetClockDivision + * @param TIMx Timer instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_CLOCKDIVISION_DIV1 + * @arg @ref LL_TIM_CLOCKDIVISION_DIV2 + * @arg @ref LL_TIM_CLOCKDIVISION_DIV4 + */ +__STATIC_INLINE uint32_t LL_TIM_GetClockDivision(TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_BIT(TIMx->CR1, TIM_CR1_CKD)); +} + +/** + * @brief Set the counter value. + * @note Macro @ref IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @rmtoll CNT CNT LL_TIM_SetCounter + * @param TIMx Timer instance + * @param Counter Counter value (between Min_Data=0 and Max_Data=0xFFFF or 0xFFFFFFFF) + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetCounter(TIM_TypeDef *TIMx, uint32_t Counter) +{ + WRITE_REG(TIMx->CNT, Counter); +} + +/** + * @brief Get the counter value. + * @note Macro @ref IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @rmtoll CNT CNT LL_TIM_GetCounter + * @param TIMx Timer instance + * @retval Counter value (between Min_Data=0 and Max_Data=0xFFFF or 0xFFFFFFFF) + */ +__STATIC_INLINE uint32_t LL_TIM_GetCounter(TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->CNT)); +} + +/** + * @brief Get the current direction of the counter + * @rmtoll CR1 DIR LL_TIM_GetDirection + * @param TIMx Timer instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_COUNTERDIRECTION_UP + * @arg @ref LL_TIM_COUNTERDIRECTION_DOWN + */ +__STATIC_INLINE uint32_t LL_TIM_GetDirection(TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_BIT(TIMx->CR1, TIM_CR1_DIR)); +} + +/** + * @brief Set the prescaler value. + * @note The counter clock frequency CK_CNT is equal to fCK_PSC / (PSC[15:0] + 1). + * @note The prescaler can be changed on the fly as this control register is buffered. The new + * prescaler ratio is taken into account at the next update event. + * @note Helper macro @ref __LL_TIM_CALC_PSC can be used to calculate the Prescaler parameter + * @rmtoll PSC PSC LL_TIM_SetPrescaler + * @param TIMx Timer instance + * @param Prescaler between Min_Data=0 and Max_Data=65535 + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetPrescaler(TIM_TypeDef *TIMx, uint32_t Prescaler) +{ + WRITE_REG(TIMx->PSC, Prescaler); +} + +/** + * @brief Get the prescaler value. + * @rmtoll PSC PSC LL_TIM_GetPrescaler + * @param TIMx Timer instance + * @retval Prescaler value between Min_Data=0 and Max_Data=65535 + */ +__STATIC_INLINE uint32_t LL_TIM_GetPrescaler(TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->PSC)); +} + +/** + * @brief Set the auto-reload value. + * @note The counter is blocked while the auto-reload value is null. + * @note Macro @ref IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @note Helper macro @ref __LL_TIM_CALC_ARR can be used to calculate the AutoReload parameter + * @rmtoll ARR ARR LL_TIM_SetAutoReload + * @param TIMx Timer instance + * @param AutoReload between Min_Data=0 and Max_Data=65535 + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetAutoReload(TIM_TypeDef *TIMx, uint32_t AutoReload) +{ + WRITE_REG(TIMx->ARR, AutoReload); +} + +/** + * @brief Get the auto-reload value. + * @rmtoll ARR ARR LL_TIM_GetAutoReload + * @note Macro @ref IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @param TIMx Timer instance + * @retval Auto-reload value + */ +__STATIC_INLINE uint32_t LL_TIM_GetAutoReload(TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->ARR)); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_Capture_Compare Capture Compare configuration + * @{ + */ +/** + * @brief Set the trigger of the capture/compare DMA request. + * @rmtoll CR2 CCDS LL_TIM_CC_SetDMAReqTrigger + * @param TIMx Timer instance + * @param DMAReqTrigger This parameter can be one of the following values: + * @arg @ref LL_TIM_CCDMAREQUEST_CC + * @arg @ref LL_TIM_CCDMAREQUEST_UPDATE + * @retval None + */ +__STATIC_INLINE void LL_TIM_CC_SetDMAReqTrigger(TIM_TypeDef *TIMx, uint32_t DMAReqTrigger) +{ + MODIFY_REG(TIMx->CR2, TIM_CR2_CCDS, DMAReqTrigger); +} + +/** + * @brief Get actual trigger of the capture/compare DMA request. + * @rmtoll CR2 CCDS LL_TIM_CC_GetDMAReqTrigger + * @param TIMx Timer instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_CCDMAREQUEST_CC + * @arg @ref LL_TIM_CCDMAREQUEST_UPDATE + */ +__STATIC_INLINE uint32_t LL_TIM_CC_GetDMAReqTrigger(TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_BIT(TIMx->CR2, TIM_CR2_CCDS)); +} + +/** + * @brief Enable capture/compare channels. + * @rmtoll CCER CC1E LL_TIM_CC_EnableChannel\n + * CCER CC2E LL_TIM_CC_EnableChannel\n + * CCER CC3E LL_TIM_CC_EnableChannel\n + * CCER CC4E LL_TIM_CC_EnableChannel + * @param TIMx Timer instance + * @param Channels This parameter can be a combination of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval None + */ +__STATIC_INLINE void LL_TIM_CC_EnableChannel(TIM_TypeDef *TIMx, uint32_t Channels) +{ + SET_BIT(TIMx->CCER, Channels); +} + +/** + * @brief Disable capture/compare channels. + * @rmtoll CCER CC1E LL_TIM_CC_DisableChannel\n + * CCER CC2E LL_TIM_CC_DisableChannel\n + * CCER CC3E LL_TIM_CC_DisableChannel\n + * CCER CC4E LL_TIM_CC_DisableChannel + * @param TIMx Timer instance + * @param Channels This parameter can be a combination of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval None + */ +__STATIC_INLINE void LL_TIM_CC_DisableChannel(TIM_TypeDef *TIMx, uint32_t Channels) +{ + CLEAR_BIT(TIMx->CCER, Channels); +} + +/** + * @brief Indicate whether channel(s) is(are) enabled. + * @rmtoll CCER CC1E LL_TIM_CC_IsEnabledChannel\n + * CCER CC2E LL_TIM_CC_IsEnabledChannel\n + * CCER CC3E LL_TIM_CC_IsEnabledChannel\n + * CCER CC4E LL_TIM_CC_IsEnabledChannel + * @param TIMx Timer instance + * @param Channels This parameter can be a combination of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_CC_IsEnabledChannel(TIM_TypeDef *TIMx, uint32_t Channels) +{ + return (READ_BIT(TIMx->CCER, Channels) == (Channels)); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_Output_Channel Output channel configuration + * @{ + */ +/** + * @brief Configure an output channel. + * @rmtoll CCMR1 CC1S LL_TIM_OC_ConfigOutput\n + * CCMR1 CC2S LL_TIM_OC_ConfigOutput\n + * CCMR2 CC3S LL_TIM_OC_ConfigOutput\n + * CCMR2 CC4S LL_TIM_OC_ConfigOutput\n + * CCER CC1P LL_TIM_OC_ConfigOutput\n + * CCER CC2P LL_TIM_OC_ConfigOutput\n + * CCER CC3P LL_TIM_OC_ConfigOutput\n + * CCER CC4P LL_TIM_OC_ConfigOutput\n + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @param Configuration This parameter must be a combination of all the following values: + * @arg @ref LL_TIM_OCPOLARITY_HIGH or @ref LL_TIM_OCPOLARITY_LOW + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_ConfigOutput(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t Configuration) +{ + register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + register uint32_t *pReg = (uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + CLEAR_BIT(*pReg, (TIM_CCMR1_CC1S << SHIFT_TAB_OCxx[iChannel])); + MODIFY_REG(TIMx->CCER, (TIM_CCER_CC1P << SHIFT_TAB_CCxP[iChannel]), + (Configuration & TIM_CCER_CC1P) << SHIFT_TAB_CCxP[iChannel]); +} + +/** + * @brief Define the behavior of the output reference signal OCxREF from which + * OCx and OCxN (when relevant) are derived. + * @rmtoll CCMR1 OC1M LL_TIM_OC_SetMode\n + * CCMR1 OC2M LL_TIM_OC_SetMode\n + * CCMR2 OC3M LL_TIM_OC_SetMode\n + * CCMR2 OC4M LL_TIM_OC_SetMode + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @param Mode This parameter can be one of the following values: + * @arg @ref LL_TIM_OCMODE_FROZEN + * @arg @ref LL_TIM_OCMODE_ACTIVE + * @arg @ref LL_TIM_OCMODE_INACTIVE + * @arg @ref LL_TIM_OCMODE_TOGGLE + * @arg @ref LL_TIM_OCMODE_FORCED_INACTIVE + * @arg @ref LL_TIM_OCMODE_FORCED_ACTIVE + * @arg @ref LL_TIM_OCMODE_PWM1 + * @arg @ref LL_TIM_OCMODE_PWM2 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_SetMode(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t Mode) +{ + register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + register uint32_t *pReg = (uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + MODIFY_REG(*pReg, ((TIM_CCMR1_OC1M | TIM_CCMR1_CC1S) << SHIFT_TAB_OCxx[iChannel]), Mode << SHIFT_TAB_OCxx[iChannel]); +} + +/** + * @brief Get the output compare mode of an output channel. + * @rmtoll CCMR1 OC1M LL_TIM_OC_GetMode\n + * CCMR1 OC2M LL_TIM_OC_GetMode\n + * CCMR2 OC3M LL_TIM_OC_GetMode\n + * CCMR2 OC4M LL_TIM_OC_GetMode + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_OCMODE_FROZEN + * @arg @ref LL_TIM_OCMODE_ACTIVE + * @arg @ref LL_TIM_OCMODE_INACTIVE + * @arg @ref LL_TIM_OCMODE_TOGGLE + * @arg @ref LL_TIM_OCMODE_FORCED_INACTIVE + * @arg @ref LL_TIM_OCMODE_FORCED_ACTIVE + * @arg @ref LL_TIM_OCMODE_PWM1 + * @arg @ref LL_TIM_OCMODE_PWM2 + */ +__STATIC_INLINE uint32_t LL_TIM_OC_GetMode(TIM_TypeDef *TIMx, uint32_t Channel) +{ + register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + register uint32_t *pReg = (uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + return (READ_BIT(*pReg, ((TIM_CCMR1_OC1M | TIM_CCMR1_CC1S) << SHIFT_TAB_OCxx[iChannel])) >> SHIFT_TAB_OCxx[iChannel]); +} + +/** + * @brief Set the polarity of an output channel. + * @rmtoll CCER CC1P LL_TIM_OC_SetPolarity\n + * CCER CC2P LL_TIM_OC_SetPolarity\n + * CCER CC3P LL_TIM_OC_SetPolarity\n + * CCER CC4P LL_TIM_OC_SetPolarity + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @param Polarity This parameter can be one of the following values: + * @arg @ref LL_TIM_OCPOLARITY_HIGH + * @arg @ref LL_TIM_OCPOLARITY_LOW + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_SetPolarity(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t Polarity) +{ + register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + MODIFY_REG(TIMx->CCER, (TIM_CCER_CC1P << SHIFT_TAB_CCxP[iChannel]), Polarity << SHIFT_TAB_CCxP[iChannel]); +} + +/** + * @brief Get the polarity of an output channel. + * @rmtoll CCER CC1P LL_TIM_OC_GetPolarity\n + * CCER CC2P LL_TIM_OC_GetPolarity\n + * CCER CC3P LL_TIM_OC_GetPolarity\n + * CCER CC4P LL_TIM_OC_GetPolarity + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_OCPOLARITY_HIGH + * @arg @ref LL_TIM_OCPOLARITY_LOW + */ +__STATIC_INLINE uint32_t LL_TIM_OC_GetPolarity(TIM_TypeDef *TIMx, uint32_t Channel) +{ + register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + return (READ_BIT(TIMx->CCER, (TIM_CCER_CC1P << SHIFT_TAB_CCxP[iChannel])) >> SHIFT_TAB_CCxP[iChannel]); +} + +/** + * @brief Enable fast mode for the output channel. + * @note Acts only if the channel is configured in PWM1 or PWM2 mode. + * @rmtoll CCMR1 OC1FE LL_TIM_OC_EnableFast\n + * CCMR1 OC2FE LL_TIM_OC_EnableFast\n + * CCMR2 OC3FE LL_TIM_OC_EnableFast\n + * CCMR2 OC4FE LL_TIM_OC_EnableFast + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_EnableFast(TIM_TypeDef *TIMx, uint32_t Channel) +{ + register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + register uint32_t *pReg = (uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + SET_BIT(*pReg, (TIM_CCMR1_OC1FE << SHIFT_TAB_OCxx[iChannel])); + +} + +/** + * @brief Disable fast mode for the output channel. + * @rmtoll CCMR1 OC1FE LL_TIM_OC_DisableFast\n + * CCMR1 OC2FE LL_TIM_OC_DisableFast\n + * CCMR2 OC3FE LL_TIM_OC_DisableFast\n + * CCMR2 OC4FE LL_TIM_OC_DisableFast + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_DisableFast(TIM_TypeDef *TIMx, uint32_t Channel) +{ + register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + register uint32_t *pReg = (uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + CLEAR_BIT(*pReg, (TIM_CCMR1_OC1FE << SHIFT_TAB_OCxx[iChannel])); + +} + +/** + * @brief Indicates whether fast mode is enabled for the output channel. + * @rmtoll CCMR1 OC1FE LL_TIM_OC_IsEnabledFast\n + * CCMR1 OC2FE LL_TIM_OC_IsEnabledFast\n + * CCMR2 OC3FE LL_TIM_OC_IsEnabledFast\n + * CCMR2 OC4FE LL_TIM_OC_IsEnabledFast\n + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_OC_IsEnabledFast(TIM_TypeDef *TIMx, uint32_t Channel) +{ + register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + register uint32_t *pReg = (uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + register uint32_t bitfield = TIM_CCMR1_OC1FE << SHIFT_TAB_OCxx[iChannel]; + return (READ_BIT(*pReg, bitfield) == bitfield); +} + +/** + * @brief Enable compare register (TIMx_CCRx) preload for the output channel. + * @rmtoll CCMR1 OC1PE LL_TIM_OC_EnablePreload\n + * CCMR1 OC2PE LL_TIM_OC_EnablePreload\n + * CCMR2 OC3PE LL_TIM_OC_EnablePreload\n + * CCMR2 OC4PE LL_TIM_OC_EnablePreload + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_EnablePreload(TIM_TypeDef *TIMx, uint32_t Channel) +{ + register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + register uint32_t *pReg = (uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + SET_BIT(*pReg, (TIM_CCMR1_OC1PE << SHIFT_TAB_OCxx[iChannel])); +} + +/** + * @brief Disable compare register (TIMx_CCRx) preload for the output channel. + * @rmtoll CCMR1 OC1PE LL_TIM_OC_DisablePreload\n + * CCMR1 OC2PE LL_TIM_OC_DisablePreload\n + * CCMR2 OC3PE LL_TIM_OC_DisablePreload\n + * CCMR2 OC4PE LL_TIM_OC_DisablePreload + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_DisablePreload(TIM_TypeDef *TIMx, uint32_t Channel) +{ + register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + register uint32_t *pReg = (uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + CLEAR_BIT(*pReg, (TIM_CCMR1_OC1PE << SHIFT_TAB_OCxx[iChannel])); +} + +/** + * @brief Indicates whether compare register (TIMx_CCRx) preload is enabled for the output channel. + * @rmtoll CCMR1 OC1PE LL_TIM_OC_IsEnabledPreload\n + * CCMR1 OC2PE LL_TIM_OC_IsEnabledPreload\n + * CCMR2 OC3PE LL_TIM_OC_IsEnabledPreload\n + * CCMR2 OC4PE LL_TIM_OC_IsEnabledPreload\n + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_OC_IsEnabledPreload(TIM_TypeDef *TIMx, uint32_t Channel) +{ + register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + register uint32_t *pReg = (uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + register uint32_t bitfield = TIM_CCMR1_OC1PE << SHIFT_TAB_OCxx[iChannel]; + return (READ_BIT(*pReg, bitfield) == bitfield); +} + +/** + * @brief Enable clearing the output channel on an external event. + * @note This function can only be used in Output compare and PWM modes. It does not work in Forced mode. + * @note Macro @ref IS_TIM_OCXREF_CLEAR_INSTANCE(TIMx) can be used to check whether + * or not a timer instance can clear the OCxREF signal on an external event. + * @rmtoll CCMR1 OC1CE LL_TIM_OC_EnableClear\n + * CCMR1 OC2CE LL_TIM_OC_EnableClear\n + * CCMR2 OC3CE LL_TIM_OC_EnableClear\n + * CCMR2 OC4CE LL_TIM_OC_EnableClear + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_EnableClear(TIM_TypeDef *TIMx, uint32_t Channel) +{ + register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + register uint32_t *pReg = (uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + SET_BIT(*pReg, (TIM_CCMR1_OC1CE << SHIFT_TAB_OCxx[iChannel])); +} + +/** + * @brief Disable clearing the output channel on an external event. + * @note Macro @ref IS_TIM_OCXREF_CLEAR_INSTANCE(TIMx) can be used to check whether + * or not a timer instance can clear the OCxREF signal on an external event. + * @rmtoll CCMR1 OC1CE LL_TIM_OC_DisableClear\n + * CCMR1 OC2CE LL_TIM_OC_DisableClear\n + * CCMR2 OC3CE LL_TIM_OC_DisableClear\n + * CCMR2 OC4CE LL_TIM_OC_DisableClear + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_DisableClear(TIM_TypeDef *TIMx, uint32_t Channel) +{ + register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + register uint32_t *pReg = (uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + CLEAR_BIT(*pReg, (TIM_CCMR1_OC1CE << SHIFT_TAB_OCxx[iChannel])); +} + +/** + * @brief Indicates clearing the output channel on an external event is enabled for the output channel. + * @note This function enables clearing the output channel on an external event. + * @note This function can only be used in Output compare and PWM modes. It does not work in Forced mode. + * @note Macro @ref IS_TIM_OCXREF_CLEAR_INSTANCE(TIMx) can be used to check whether + * or not a timer instance can clear the OCxREF signal on an external event. + * @rmtoll CCMR1 OC1CE LL_TIM_OC_IsEnabledClear\n + * CCMR1 OC2CE LL_TIM_OC_IsEnabledClear\n + * CCMR2 OC3CE LL_TIM_OC_IsEnabledClear\n + * CCMR2 OC4CE LL_TIM_OC_IsEnabledClear\n + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_OC_IsEnabledClear(TIM_TypeDef *TIMx, uint32_t Channel) +{ + register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + register uint32_t *pReg = (uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + register uint32_t bitfield = TIM_CCMR1_OC1CE << SHIFT_TAB_OCxx[iChannel]; + return (READ_BIT(*pReg, bitfield) == bitfield); +} + +/** + * @brief Set compare value for output channel 1 (TIMx_CCR1). + * @note In 32-bit timer implementations compare value can be between 0x00000000 and 0xFFFFFFFF. + * @note Macro @ref IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @note Macro @ref IS_TIM_CC1_INSTANCE(TIMx) can be used to check whether or not + * output channel 1 is supported by a timer instance. + * @rmtoll CCR1 CCR1 LL_TIM_OC_SetCompareCH1 + * @param TIMx Timer instance + * @param CompareValue between Min_Data=0 and Max_Data=65535 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_SetCompareCH1(TIM_TypeDef *TIMx, uint32_t CompareValue) +{ + WRITE_REG(TIMx->CCR1, CompareValue); +} + +/** + * @brief Set compare value for output channel 2 (TIMx_CCR2). + * @note In 32-bit timer implementations compare value can be between 0x00000000 and 0xFFFFFFFF. + * @note Macro @ref IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @note Macro @ref IS_TIM_CC2_INSTANCE(TIMx) can be used to check whether or not + * output channel 2 is supported by a timer instance. + * @rmtoll CCR2 CCR2 LL_TIM_OC_SetCompareCH2 + * @param TIMx Timer instance + * @param CompareValue between Min_Data=0 and Max_Data=65535 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_SetCompareCH2(TIM_TypeDef *TIMx, uint32_t CompareValue) +{ + WRITE_REG(TIMx->CCR2, CompareValue); +} + +/** + * @brief Set compare value for output channel 3 (TIMx_CCR3). + * @note In 32-bit timer implementations compare value can be between 0x00000000 and 0xFFFFFFFF. + * @note Macro @ref IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @note Macro @ref IS_TIM_CC3_INSTANCE(TIMx) can be used to check whether or not + * output channel is supported by a timer instance. + * @rmtoll CCR3 CCR3 LL_TIM_OC_SetCompareCH3 + * @param TIMx Timer instance + * @param CompareValue between Min_Data=0 and Max_Data=65535 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_SetCompareCH3(TIM_TypeDef *TIMx, uint32_t CompareValue) +{ + WRITE_REG(TIMx->CCR3, CompareValue); +} + +/** + * @brief Set compare value for output channel 4 (TIMx_CCR4). + * @note In 32-bit timer implementations compare value can be between 0x00000000 and 0xFFFFFFFF. + * @note Macro @ref IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @note Macro @ref IS_TIM_CC4_INSTANCE(TIMx) can be used to check whether or not + * output channel 4 is supported by a timer instance. + * @rmtoll CCR4 CCR4 LL_TIM_OC_SetCompareCH4 + * @param TIMx Timer instance + * @param CompareValue between Min_Data=0 and Max_Data=65535 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_SetCompareCH4(TIM_TypeDef *TIMx, uint32_t CompareValue) +{ + WRITE_REG(TIMx->CCR4, CompareValue); +} + +/** + * @brief Get compare value (TIMx_CCR1) set for output channel 1. + * @note In 32-bit timer implementations returned compare value can be between 0x00000000 and 0xFFFFFFFF. + * @note Macro @ref IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @note Macro @ref IS_TIM_CC1_INSTANCE(TIMx) can be used to check whether or not + * output channel 1 is supported by a timer instance. + * @rmtoll CCR1 CCR1 LL_TIM_OC_GetCompareCH1 + * @param TIMx Timer instance + * @retval CompareValue (between Min_Data=0 and Max_Data=65535) + */ +__STATIC_INLINE uint32_t LL_TIM_OC_GetCompareCH1(TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->CCR1)); +} + +/** + * @brief Get compare value (TIMx_CCR2) set for output channel 2. + * @note In 32-bit timer implementations returned compare value can be between 0x00000000 and 0xFFFFFFFF. + * @note Macro @ref IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @note Macro @ref IS_TIM_CC2_INSTANCE(TIMx) can be used to check whether or not + * output channel 2 is supported by a timer instance. + * @rmtoll CCR2 CCR2 LL_TIM_OC_GetCompareCH2 + * @param TIMx Timer instance + * @retval CompareValue (between Min_Data=0 and Max_Data=65535) + */ +__STATIC_INLINE uint32_t LL_TIM_OC_GetCompareCH2(TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->CCR2)); +} + +/** + * @brief Get compare value (TIMx_CCR3) set for output channel 3. + * @note In 32-bit timer implementations returned compare value can be between 0x00000000 and 0xFFFFFFFF. + * @note Macro @ref IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @note Macro @ref IS_TIM_CC3_INSTANCE(TIMx) can be used to check whether or not + * output channel 3 is supported by a timer instance. + * @rmtoll CCR3 CCR3 LL_TIM_OC_GetCompareCH3 + * @param TIMx Timer instance + * @retval CompareValue (between Min_Data=0 and Max_Data=65535) + */ +__STATIC_INLINE uint32_t LL_TIM_OC_GetCompareCH3(TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->CCR3)); +} + +/** + * @brief Get compare value (TIMx_CCR4) set for output channel 4. + * @note In 32-bit timer implementations returned compare value can be between 0x00000000 and 0xFFFFFFFF. + * @note Macro @ref IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @note Macro @ref IS_TIM_CC4_INSTANCE(TIMx) can be used to check whether or not + * output channel 4 is supported by a timer instance. + * @rmtoll CCR4 CCR4 LL_TIM_OC_GetCompareCH4 + * @param TIMx Timer instance + * @retval CompareValue (between Min_Data=0 and Max_Data=65535) + */ +__STATIC_INLINE uint32_t LL_TIM_OC_GetCompareCH4(TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->CCR4)); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_Input_Channel Input channel configuration + * @{ + */ +/** + * @brief Configure input channel. + * @rmtoll CCMR1 CC1S LL_TIM_IC_Config\n + * CCMR1 IC1PSC LL_TIM_IC_Config\n + * CCMR1 IC1F LL_TIM_IC_Config\n + * CCMR1 CC2S LL_TIM_IC_Config\n + * CCMR1 IC2PSC LL_TIM_IC_Config\n + * CCMR1 IC2F LL_TIM_IC_Config\n + * CCMR2 CC3S LL_TIM_IC_Config\n + * CCMR2 IC3PSC LL_TIM_IC_Config\n + * CCMR2 IC3F LL_TIM_IC_Config\n + * CCMR2 CC4S LL_TIM_IC_Config\n + * CCMR2 IC4PSC LL_TIM_IC_Config\n + * CCMR2 IC4F LL_TIM_IC_Config\n + * CCER CC1P LL_TIM_IC_Config\n + * CCER CC1NP LL_TIM_IC_Config\n + * CCER CC2P LL_TIM_IC_Config\n + * CCER CC2NP LL_TIM_IC_Config\n + * CCER CC3P LL_TIM_IC_Config\n + * CCER CC3NP LL_TIM_IC_Config\n + * CCER CC4P LL_TIM_IC_Config\n + * CCER CC4NP LL_TIM_IC_Config + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @param Configuration This parameter must be a combination of all the following values: + * @arg @ref LL_TIM_ACTIVEINPUT_DIRECTTI or @ref LL_TIM_ACTIVEINPUT_INDIRECTTI or @ref LL_TIM_ACTIVEINPUT_TRC + * @arg @ref LL_TIM_ICPSC_DIV1 or ... or @ref LL_TIM_ICPSC_DIV8 + * @arg @ref LL_TIM_IC_FILTER_FDIV1 or ... or @ref LL_TIM_IC_FILTER_FDIV32_N8 + * @arg @ref LL_TIM_IC_POLARITY_RISING or @ref LL_TIM_IC_POLARITY_FALLING or @ref LL_TIM_IC_POLARITY_BOTHEDGE + * @retval None + */ +__STATIC_INLINE void LL_TIM_IC_Config(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t Configuration) +{ + register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + register uint32_t *pReg = (uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + MODIFY_REG(*pReg, ((TIM_CCMR1_IC1F | TIM_CCMR1_IC1PSC | TIM_CCMR1_CC1S) << SHIFT_TAB_ICxx[iChannel]), + ((Configuration >> 16U) & (TIM_CCMR1_IC1F | TIM_CCMR1_IC1PSC | TIM_CCMR1_CC1S)) << SHIFT_TAB_ICxx[iChannel]); + MODIFY_REG(TIMx->CCER, ((TIM_CCER_CC1NP | TIM_CCER_CC1P) << SHIFT_TAB_CCxP[iChannel]), + (Configuration & (TIM_CCER_CC1NP | TIM_CCER_CC1P)) << SHIFT_TAB_CCxP[iChannel]); +} + +/** + * @brief Set the active input. + * @rmtoll CCMR1 CC1S LL_TIM_IC_SetActiveInput\n + * CCMR1 CC2S LL_TIM_IC_SetActiveInput\n + * CCMR2 CC3S LL_TIM_IC_SetActiveInput\n + * CCMR2 CC4S LL_TIM_IC_SetActiveInput + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @param ICActiveInput This parameter can be one of the following values: + * @arg @ref LL_TIM_ACTIVEINPUT_DIRECTTI + * @arg @ref LL_TIM_ACTIVEINPUT_INDIRECTTI + * @arg @ref LL_TIM_ACTIVEINPUT_TRC + * @retval None + */ +__STATIC_INLINE void LL_TIM_IC_SetActiveInput(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ICActiveInput) +{ + register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + register uint32_t *pReg = (uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + MODIFY_REG(*pReg, ((TIM_CCMR1_CC1S) << SHIFT_TAB_ICxx[iChannel]), (ICActiveInput >> 16U) << SHIFT_TAB_ICxx[iChannel]); +} + +/** + * @brief Get the current active input. + * @rmtoll CCMR1 CC1S LL_TIM_IC_GetActiveInput\n + * CCMR1 CC2S LL_TIM_IC_GetActiveInput\n + * CCMR2 CC3S LL_TIM_IC_GetActiveInput\n + * CCMR2 CC4S LL_TIM_IC_GetActiveInput + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_ACTIVEINPUT_DIRECTTI + * @arg @ref LL_TIM_ACTIVEINPUT_INDIRECTTI + * @arg @ref LL_TIM_ACTIVEINPUT_TRC + */ +__STATIC_INLINE uint32_t LL_TIM_IC_GetActiveInput(TIM_TypeDef *TIMx, uint32_t Channel) +{ + register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + register uint32_t *pReg = (uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + return ((READ_BIT(*pReg, ((TIM_CCMR1_CC1S) << SHIFT_TAB_ICxx[iChannel])) >> SHIFT_TAB_ICxx[iChannel]) << 16U); +} + +/** + * @brief Set the prescaler of input channel. + * @rmtoll CCMR1 IC1PSC LL_TIM_IC_SetPrescaler\n + * CCMR1 IC2PSC LL_TIM_IC_SetPrescaler\n + * CCMR2 IC3PSC LL_TIM_IC_SetPrescaler\n + * CCMR2 IC4PSC LL_TIM_IC_SetPrescaler + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @param ICPrescaler This parameter can be one of the following values: + * @arg @ref LL_TIM_ICPSC_DIV1 + * @arg @ref LL_TIM_ICPSC_DIV2 + * @arg @ref LL_TIM_ICPSC_DIV4 + * @arg @ref LL_TIM_ICPSC_DIV8 + * @retval None + */ +__STATIC_INLINE void LL_TIM_IC_SetPrescaler(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ICPrescaler) +{ + register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + register uint32_t *pReg = (uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + MODIFY_REG(*pReg, ((TIM_CCMR1_IC1PSC) << SHIFT_TAB_ICxx[iChannel]), (ICPrescaler >> 16U) << SHIFT_TAB_ICxx[iChannel]); +} + +/** + * @brief Get the current prescaler value acting on an input channel. + * @rmtoll CCMR1 IC1PSC LL_TIM_IC_GetPrescaler\n + * CCMR1 IC2PSC LL_TIM_IC_GetPrescaler\n + * CCMR2 IC3PSC LL_TIM_IC_GetPrescaler\n + * CCMR2 IC4PSC LL_TIM_IC_GetPrescaler + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_ICPSC_DIV1 + * @arg @ref LL_TIM_ICPSC_DIV2 + * @arg @ref LL_TIM_ICPSC_DIV4 + * @arg @ref LL_TIM_ICPSC_DIV8 + */ +__STATIC_INLINE uint32_t LL_TIM_IC_GetPrescaler(TIM_TypeDef *TIMx, uint32_t Channel) +{ + register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + register uint32_t *pReg = (uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + return ((READ_BIT(*pReg, ((TIM_CCMR1_IC1PSC) << SHIFT_TAB_ICxx[iChannel])) >> SHIFT_TAB_ICxx[iChannel]) << 16U); +} + +/** + * @brief Set the input filter duration. + * @rmtoll CCMR1 IC1F LL_TIM_IC_SetFilter\n + * CCMR1 IC2F LL_TIM_IC_SetFilter\n + * CCMR2 IC3F LL_TIM_IC_SetFilter\n + * CCMR2 IC4F LL_TIM_IC_SetFilter + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @param ICFilter This parameter can be one of the following values: + * @arg @ref LL_TIM_IC_FILTER_FDIV1 + * @arg @ref LL_TIM_IC_FILTER_FDIV1_N2 + * @arg @ref LL_TIM_IC_FILTER_FDIV1_N4 + * @arg @ref LL_TIM_IC_FILTER_FDIV1_N8 + * @arg @ref LL_TIM_IC_FILTER_FDIV2_N6 + * @arg @ref LL_TIM_IC_FILTER_FDIV2_N8 + * @arg @ref LL_TIM_IC_FILTER_FDIV4_N6 + * @arg @ref LL_TIM_IC_FILTER_FDIV4_N8 + * @arg @ref LL_TIM_IC_FILTER_FDIV8_N6 + * @arg @ref LL_TIM_IC_FILTER_FDIV8_N8 + * @arg @ref LL_TIM_IC_FILTER_FDIV16_N5 + * @arg @ref LL_TIM_IC_FILTER_FDIV16_N6 + * @arg @ref LL_TIM_IC_FILTER_FDIV16_N8 + * @arg @ref LL_TIM_IC_FILTER_FDIV32_N5 + * @arg @ref LL_TIM_IC_FILTER_FDIV32_N6 + * @arg @ref LL_TIM_IC_FILTER_FDIV32_N8 + * @retval None + */ +__STATIC_INLINE void LL_TIM_IC_SetFilter(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ICFilter) +{ + register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + register uint32_t *pReg = (uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + MODIFY_REG(*pReg, ((TIM_CCMR1_IC1F) << SHIFT_TAB_ICxx[iChannel]), (ICFilter >> 16U) << SHIFT_TAB_ICxx[iChannel]); +} + +/** + * @brief Get the input filter duration. + * @rmtoll CCMR1 IC1F LL_TIM_IC_GetFilter\n + * CCMR1 IC2F LL_TIM_IC_GetFilter\n + * CCMR2 IC3F LL_TIM_IC_GetFilter\n + * CCMR2 IC4F LL_TIM_IC_GetFilter + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_IC_FILTER_FDIV1 + * @arg @ref LL_TIM_IC_FILTER_FDIV1_N2 + * @arg @ref LL_TIM_IC_FILTER_FDIV1_N4 + * @arg @ref LL_TIM_IC_FILTER_FDIV1_N8 + * @arg @ref LL_TIM_IC_FILTER_FDIV2_N6 + * @arg @ref LL_TIM_IC_FILTER_FDIV2_N8 + * @arg @ref LL_TIM_IC_FILTER_FDIV4_N6 + * @arg @ref LL_TIM_IC_FILTER_FDIV4_N8 + * @arg @ref LL_TIM_IC_FILTER_FDIV8_N6 + * @arg @ref LL_TIM_IC_FILTER_FDIV8_N8 + * @arg @ref LL_TIM_IC_FILTER_FDIV16_N5 + * @arg @ref LL_TIM_IC_FILTER_FDIV16_N6 + * @arg @ref LL_TIM_IC_FILTER_FDIV16_N8 + * @arg @ref LL_TIM_IC_FILTER_FDIV32_N5 + * @arg @ref LL_TIM_IC_FILTER_FDIV32_N6 + * @arg @ref LL_TIM_IC_FILTER_FDIV32_N8 + */ +__STATIC_INLINE uint32_t LL_TIM_IC_GetFilter(TIM_TypeDef *TIMx, uint32_t Channel) +{ + register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + register uint32_t *pReg = (uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + return ((READ_BIT(*pReg, ((TIM_CCMR1_IC1F) << SHIFT_TAB_ICxx[iChannel])) >> SHIFT_TAB_ICxx[iChannel]) << 16U); +} + +/** + * @brief Set the input channel polarity. + * @rmtoll CCER CC1P LL_TIM_IC_SetPolarity\n + * CCER CC1NP LL_TIM_IC_SetPolarity\n + * CCER CC2P LL_TIM_IC_SetPolarity\n + * CCER CC2NP LL_TIM_IC_SetPolarity\n + * CCER CC3P LL_TIM_IC_SetPolarity\n + * CCER CC3NP LL_TIM_IC_SetPolarity\n + * CCER CC4P LL_TIM_IC_SetPolarity\n + * CCER CC4NP LL_TIM_IC_SetPolarity + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @param ICPolarity This parameter can be one of the following values: + * @arg @ref LL_TIM_IC_POLARITY_RISING + * @arg @ref LL_TIM_IC_POLARITY_FALLING + * @arg @ref LL_TIM_IC_POLARITY_BOTHEDGE + * @retval None + */ +__STATIC_INLINE void LL_TIM_IC_SetPolarity(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ICPolarity) +{ + register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + MODIFY_REG(TIMx->CCER, ((TIM_CCER_CC1NP | TIM_CCER_CC1P) << SHIFT_TAB_CCxP[iChannel]), + ICPolarity << SHIFT_TAB_CCxP[iChannel]); +} + +/** + * @brief Get the current input channel polarity. + * @rmtoll CCER CC1P LL_TIM_IC_GetPolarity\n + * CCER CC1NP LL_TIM_IC_GetPolarity\n + * CCER CC2P LL_TIM_IC_GetPolarity\n + * CCER CC2NP LL_TIM_IC_GetPolarity\n + * CCER CC3P LL_TIM_IC_GetPolarity\n + * CCER CC3NP LL_TIM_IC_GetPolarity\n + * CCER CC4P LL_TIM_IC_GetPolarity\n + * CCER CC4NP LL_TIM_IC_GetPolarity + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_IC_POLARITY_RISING + * @arg @ref LL_TIM_IC_POLARITY_FALLING + * @arg @ref LL_TIM_IC_POLARITY_BOTHEDGE + */ +__STATIC_INLINE uint32_t LL_TIM_IC_GetPolarity(TIM_TypeDef *TIMx, uint32_t Channel) +{ + register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + return (READ_BIT(TIMx->CCER, ((TIM_CCER_CC1NP | TIM_CCER_CC1P) << SHIFT_TAB_CCxP[iChannel])) >> + SHIFT_TAB_CCxP[iChannel]); +} + +/** + * @brief Connect the TIMx_CH1, CH2 and CH3 pins to the TI1 input (XOR combination). + * @note Macro @ref IS_TIM_XOR_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides an XOR input. + * @rmtoll CR2 TI1S LL_TIM_IC_EnableXORCombination + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_IC_EnableXORCombination(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->CR2, TIM_CR2_TI1S); +} + +/** + * @brief Disconnect the TIMx_CH1, CH2 and CH3 pins from the TI1 input. + * @note Macro @ref IS_TIM_XOR_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides an XOR input. + * @rmtoll CR2 TI1S LL_TIM_IC_DisableXORCombination + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_IC_DisableXORCombination(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->CR2, TIM_CR2_TI1S); +} + +/** + * @brief Indicates whether the TIMx_CH1, CH2 and CH3 pins are connectected to the TI1 input. + * @note Macro @ref IS_TIM_XOR_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides an XOR input. + * @rmtoll CR2 TI1S LL_TIM_IC_IsEnabledXORCombination + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IC_IsEnabledXORCombination(TIM_TypeDef *TIMx) +{ + return (READ_BIT(TIMx->CR2, TIM_CR2_TI1S) == (TIM_CR2_TI1S)); +} + +/** + * @brief Get captured value for input channel 1. + * @note In 32-bit timer implementations returned captured value can be between 0x00000000 and 0xFFFFFFFF. + * @note Macro @ref IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @note Macro @ref IS_TIM_CC1_INSTANCE(TIMx) can be used to check whether or not + * input channel 1 is supported by a timer instance. + * @rmtoll CCR1 CCR1 LL_TIM_IC_GetCaptureCH1 + * @param TIMx Timer instance + * @retval CapturedValue (between Min_Data=0 and Max_Data=65535) + */ +__STATIC_INLINE uint32_t LL_TIM_IC_GetCaptureCH1(TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->CCR1)); +} + +/** + * @brief Get captured value for input channel 2. + * @note In 32-bit timer implementations returned captured value can be between 0x00000000 and 0xFFFFFFFF. + * @note Macro @ref IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @note Macro @ref IS_TIM_CC2_INSTANCE(TIMx) can be used to check whether or not + * input channel 2 is supported by a timer instance. + * @rmtoll CCR2 CCR2 LL_TIM_IC_GetCaptureCH2 + * @param TIMx Timer instance + * @retval CapturedValue (between Min_Data=0 and Max_Data=65535) + */ +__STATIC_INLINE uint32_t LL_TIM_IC_GetCaptureCH2(TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->CCR2)); +} + +/** + * @brief Get captured value for input channel 3. + * @note In 32-bit timer implementations returned captured value can be between 0x00000000 and 0xFFFFFFFF. + * @note Macro @ref IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @note Macro @ref IS_TIM_CC3_INSTANCE(TIMx) can be used to check whether or not + * input channel 3 is supported by a timer instance. + * @rmtoll CCR3 CCR3 LL_TIM_IC_GetCaptureCH3 + * @param TIMx Timer instance + * @retval CapturedValue (between Min_Data=0 and Max_Data=65535) + */ +__STATIC_INLINE uint32_t LL_TIM_IC_GetCaptureCH3(TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->CCR3)); +} + +/** + * @brief Get captured value for input channel 4. + * @note In 32-bit timer implementations returned captured value can be between 0x00000000 and 0xFFFFFFFF. + * @note Macro @ref IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @note Macro @ref IS_TIM_CC4_INSTANCE(TIMx) can be used to check whether or not + * input channel 4 is supported by a timer instance. + * @rmtoll CCR4 CCR4 LL_TIM_IC_GetCaptureCH4 + * @param TIMx Timer instance + * @retval CapturedValue (between Min_Data=0 and Max_Data=65535) + */ +__STATIC_INLINE uint32_t LL_TIM_IC_GetCaptureCH4(TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->CCR4)); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_Clock_Selection Counter clock selection + * @{ + */ +/** + * @brief Enable external clock mode 2. + * @note When external clock mode 2 is enabled the counter is clocked by any active edge on the ETRF signal. + * @note Macro @ref IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports external clock mode2. + * @rmtoll SMCR ECE LL_TIM_EnableExternalClock + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableExternalClock(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->SMCR, TIM_SMCR_ECE); +} + +/** + * @brief Disable external clock mode 2. + * @note Macro @ref IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports external clock mode2. + * @rmtoll SMCR ECE LL_TIM_DisableExternalClock + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableExternalClock(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->SMCR, TIM_SMCR_ECE); +} + +/** + * @brief Indicate whether external clock mode 2 is enabled. + * @note Macro @ref IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports external clock mode2. + * @rmtoll SMCR ECE LL_TIM_IsEnabledExternalClock + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledExternalClock(TIM_TypeDef *TIMx) +{ + return (READ_BIT(TIMx->SMCR, TIM_SMCR_ECE) == (TIM_SMCR_ECE)); +} + +/** + * @brief Set the clock source of the counter clock. + * @note when selected clock source is external clock mode 1, the timer input + * the external clock is applied is selected by calling the @ref LL_TIM_SetTriggerInput() + * function. This timer input must be configured by calling + * the @ref LL_TIM_IC_Config() function. + * @note Macro @ref IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports external clock mode1. + * @note Macro @ref IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports external clock mode2. + * @rmtoll SMCR SMS LL_TIM_SetClockSource\n + * SMCR ECE LL_TIM_SetClockSource + * @param TIMx Timer instance + * @param ClockSource This parameter can be one of the following values: + * @arg @ref LL_TIM_CLOCKSOURCE_INTERNAL + * @arg @ref LL_TIM_CLOCKSOURCE_EXT_MODE1 + * @arg @ref LL_TIM_CLOCKSOURCE_EXT_MODE2 + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetClockSource(TIM_TypeDef *TIMx, uint32_t ClockSource) +{ + MODIFY_REG(TIMx->SMCR, TIM_SMCR_SMS | TIM_SMCR_ECE, ClockSource); +} + +/** + * @brief Set the encoder interface mode. + * @note Macro @ref IS_TIM_ENCODER_INTERFACE_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports the encoder mode. + * @rmtoll SMCR SMS LL_TIM_SetEncoderMode + * @param TIMx Timer instance + * @param EncoderMode This parameter can be one of the following values: + * @arg @ref LL_TIM_ENCODERMODE_X2_TI1 + * @arg @ref LL_TIM_ENCODERMODE_X2_TI2 + * @arg @ref LL_TIM_ENCODERMODE_X4_TI12 + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetEncoderMode(TIM_TypeDef *TIMx, uint32_t EncoderMode) +{ + MODIFY_REG(TIMx->SMCR, TIM_SMCR_SMS, EncoderMode); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_Timer_Synchronization Timer synchronisation configuration + * @{ + */ +/** + * @brief Set the trigger output (TRGO) used for timer synchronization . + * @note Macro @ref IS_TIM_MASTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance can operate as a master timer. + * @rmtoll CR2 MMS LL_TIM_SetTriggerOutput + * @param TIMx Timer instance + * @param TimerSynchronization This parameter can be one of the following values: + * @arg @ref LL_TIM_TRGO_RESET + * @arg @ref LL_TIM_TRGO_ENABLE + * @arg @ref LL_TIM_TRGO_UPDATE + * @arg @ref LL_TIM_TRGO_CC1IF + * @arg @ref LL_TIM_TRGO_OC1REF + * @arg @ref LL_TIM_TRGO_OC2REF + * @arg @ref LL_TIM_TRGO_OC3REF + * @arg @ref LL_TIM_TRGO_OC4REF + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetTriggerOutput(TIM_TypeDef *TIMx, uint32_t TimerSynchronization) +{ + MODIFY_REG(TIMx->CR2, TIM_CR2_MMS, TimerSynchronization); +} + +/** + * @brief Set the synchronization mode of a slave timer. + * @note Macro @ref IS_TIM_SLAVE_INSTANCE(TIMx) can be used to check whether or not + * a timer instance can operate as a slave timer. + * @rmtoll SMCR SMS LL_TIM_SetSlaveMode + * @param TIMx Timer instance + * @param SlaveMode This parameter can be one of the following values: + * @arg @ref LL_TIM_SLAVEMODE_DISABLED + * @arg @ref LL_TIM_SLAVEMODE_RESET + * @arg @ref LL_TIM_SLAVEMODE_GATED + * @arg @ref LL_TIM_SLAVEMODE_TRIGGER + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetSlaveMode(TIM_TypeDef *TIMx, uint32_t SlaveMode) +{ + MODIFY_REG(TIMx->SMCR, TIM_SMCR_SMS, SlaveMode); +} + +/** + * @brief Set the selects the trigger input to be used to synchronize the counter. + * @note Macro @ref IS_TIM_SLAVE_INSTANCE(TIMx) can be used to check whether or not + * a timer instance can operate as a slave timer. + * @rmtoll SMCR TS LL_TIM_SetTriggerInput + * @param TIMx Timer instance + * @param TriggerInput This parameter can be one of the following values: + * @arg @ref LL_TIM_TS_ITR0 + * @arg @ref LL_TIM_TS_ITR1 + * @arg @ref LL_TIM_TS_ITR2 + * @arg @ref LL_TIM_TS_ITR3 + * @arg @ref LL_TIM_TS_TI1F_ED + * @arg @ref LL_TIM_TS_TI1FP1 + * @arg @ref LL_TIM_TS_TI2FP2 + * @arg @ref LL_TIM_TS_ETRF + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetTriggerInput(TIM_TypeDef *TIMx, uint32_t TriggerInput) +{ + MODIFY_REG(TIMx->SMCR, TIM_SMCR_TS, TriggerInput); +} + +/** + * @brief Enable the Master/Slave mode. + * @note Macro @ref IS_TIM_SLAVE_INSTANCE(TIMx) can be used to check whether or not + * a timer instance can operate as a slave timer. + * @rmtoll SMCR MSM LL_TIM_EnableMasterSlaveMode + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableMasterSlaveMode(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->SMCR, TIM_SMCR_MSM); +} + +/** + * @brief Disable the Master/Slave mode. + * @note Macro @ref IS_TIM_SLAVE_INSTANCE(TIMx) can be used to check whether or not + * a timer instance can operate as a slave timer. + * @rmtoll SMCR MSM LL_TIM_DisableMasterSlaveMode + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableMasterSlaveMode(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->SMCR, TIM_SMCR_MSM); +} + +/** + * @brief Indicates whether the Master/Slave mode is enabled. + * @note Macro @ref IS_TIM_SLAVE_INSTANCE(TIMx) can be used to check whether or not + * a timer instance can operate as a slave timer. + * @rmtoll SMCR MSM LL_TIM_IsEnabledMasterSlaveMode + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledMasterSlaveMode(TIM_TypeDef *TIMx) +{ + return (READ_BIT(TIMx->SMCR, TIM_SMCR_MSM) == (TIM_SMCR_MSM)); +} + +/** + * @brief Configure the external trigger (ETR) input. + * @note Macro @ref IS_TIM_ETR_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides an external trigger input. + * @rmtoll SMCR ETP LL_TIM_ConfigETR\n + * SMCR ETPS LL_TIM_ConfigETR\n + * SMCR ETF LL_TIM_ConfigETR + * @param TIMx Timer instance + * @param ETRPolarity This parameter can be one of the following values: + * @arg @ref LL_TIM_ETR_POLARITY_NONINVERTED + * @arg @ref LL_TIM_ETR_POLARITY_INVERTED + * @param ETRPrescaler This parameter can be one of the following values: + * @arg @ref LL_TIM_ETR_PRESCALER_DIV1 + * @arg @ref LL_TIM_ETR_PRESCALER_DIV2 + * @arg @ref LL_TIM_ETR_PRESCALER_DIV4 + * @arg @ref LL_TIM_ETR_PRESCALER_DIV8 + * @param ETRFilter This parameter can be one of the following values: + * @arg @ref LL_TIM_ETR_FILTER_FDIV1 + * @arg @ref LL_TIM_ETR_FILTER_FDIV1_N2 + * @arg @ref LL_TIM_ETR_FILTER_FDIV1_N4 + * @arg @ref LL_TIM_ETR_FILTER_FDIV1_N8 + * @arg @ref LL_TIM_ETR_FILTER_FDIV2_N6 + * @arg @ref LL_TIM_ETR_FILTER_FDIV2_N8 + * @arg @ref LL_TIM_ETR_FILTER_FDIV4_N6 + * @arg @ref LL_TIM_ETR_FILTER_FDIV4_N8 + * @arg @ref LL_TIM_ETR_FILTER_FDIV8_N6 + * @arg @ref LL_TIM_ETR_FILTER_FDIV8_N8 + * @arg @ref LL_TIM_ETR_FILTER_FDIV16_N5 + * @arg @ref LL_TIM_ETR_FILTER_FDIV16_N6 + * @arg @ref LL_TIM_ETR_FILTER_FDIV16_N8 + * @arg @ref LL_TIM_ETR_FILTER_FDIV32_N5 + * @arg @ref LL_TIM_ETR_FILTER_FDIV32_N6 + * @arg @ref LL_TIM_ETR_FILTER_FDIV32_N8 + * @retval None + */ +__STATIC_INLINE void LL_TIM_ConfigETR(TIM_TypeDef *TIMx, uint32_t ETRPolarity, uint32_t ETRPrescaler, + uint32_t ETRFilter) +{ + MODIFY_REG(TIMx->SMCR, TIM_SMCR_ETP | TIM_SMCR_ETPS | TIM_SMCR_ETF, ETRPolarity | ETRPrescaler | ETRFilter); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_DMA_Burst_Mode DMA burst mode configuration + * @{ + */ +/** + * @brief Configures the timer DMA burst feature. + * @note Macro @ref IS_TIM_DMABURST_INSTANCE(TIMx) can be used to check whether or + * not a timer instance supports the DMA burst mode. + * @rmtoll DCR DBL LL_TIM_ConfigDMABurst\n + * DCR DBA LL_TIM_ConfigDMABurst + * @param TIMx Timer instance +* @param DMABurstBaseAddress This parameter can be one of the following values: + * @arg @ref LL_TIM_DMABURST_BASEADDR_CR1 + * @arg @ref LL_TIM_DMABURST_BASEADDR_CR2 + * @arg @ref LL_TIM_DMABURST_BASEADDR_SMCR + * @arg @ref LL_TIM_DMABURST_BASEADDR_DIER + * @arg @ref LL_TIM_DMABURST_BASEADDR_SR + * @arg @ref LL_TIM_DMABURST_BASEADDR_EGR + * @arg @ref LL_TIM_DMABURST_BASEADDR_CCMR1 + * @arg @ref LL_TIM_DMABURST_BASEADDR_CCMR2 + * @arg @ref LL_TIM_DMABURST_BASEADDR_CCER + * @arg @ref LL_TIM_DMABURST_BASEADDR_CNT + * @arg @ref LL_TIM_DMABURST_BASEADDR_PSC + * @arg @ref LL_TIM_DMABURST_BASEADDR_ARR + * @arg @ref LL_TIM_DMABURST_BASEADDR_CCR1 + * @arg @ref LL_TIM_DMABURST_BASEADDR_CCR2 + * @arg @ref LL_TIM_DMABURST_BASEADDR_CCR3 + * @arg @ref LL_TIM_DMABURST_BASEADDR_CCR4 + * @arg @ref LL_TIM_DMABURST_BASEADDR_OR + * @param DMABurstLength This parameter can be one of the following values: + * @arg @ref LL_TIM_DMABURST_LENGTH_1TRANSFER + * @arg @ref LL_TIM_DMABURST_LENGTH_2TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_3TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_4TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_5TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_6TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_7TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_8TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_9TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_10TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_11TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_12TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_13TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_14TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_15TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_16TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_17TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_18TRANSFERS + * @retval None + */ +__STATIC_INLINE void LL_TIM_ConfigDMABurst(TIM_TypeDef *TIMx, uint32_t DMABurstBaseAddress, uint32_t DMABurstLength) +{ + MODIFY_REG(TIMx->DCR, TIM_DCR_DBL | TIM_DCR_DBA, DMABurstBaseAddress | DMABurstLength); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_Timer_Inputs_Remapping Timer input remapping + * @{ + */ +/** + * @brief Remap TIM inputs (input channel, internal/external triggers). + * @note Macro @ref IS_TIM_REMAP_INSTANCE(TIMx) can be used to check whether or not + * a some timer inputs can be remapped. + * @rmtoll TIM2_OR ITR1_RMP LL_TIM_SetRemap\n + * TIM3_OR ITR2_RMP LL_TIM_SetRemap\n + * TIM9_OR TI1_RMP LL_TIM_SetRemap\n + * TIM9_OR ITR1_RMP LL_TIM_SetRemap\n + * TIM10_OR TI1_RMP LL_TIM_SetRemap\n + * TIM10_OR ETR_RMP LL_TIM_SetRemap\n + * TIM10_OR TI1_RMP_RI LL_TIM_SetRemap\n + * TIM11_OR TI1_RMP LL_TIM_SetRemap\n + * TIM11_OR ETR_RMP LL_TIM_SetRemap\n + * TIM11_OR TI1_RMP_RI LL_TIM_SetRemap + * @param TIMx Timer instance + * @param Remap Remap params depends on the TIMx. Description available only + * in CHM version of the User Manual (not in .pdf). + * Otherwise see Reference Manual description of OR registers. + * + * Below description summarizes "Timer Instance" and "Remap" param combinations: + * + * TIM2: any combination of ITR1_RMP where + * + * . . ITR1_RMP can be one of the following values + * @arg @ref LL_TIM_TIM2_TIR1_RMP_TIM10_OC (**) + * @arg @ref LL_TIM_TIM2_TIR1_RMP_TIM5_TGO (**) + * + * TIM3: any combination of ITR2_RMP where + * + * . . ITR2_RMP can be one of the following values + * @arg @ref LL_TIM_TIM3_TIR2_RMP_TIM11_OC (**) + * @arg @ref LL_TIM_TIM3_TIR2_RMP_TIM5_TGO (**) + * + * TIM9: any combination of TI1_RMP, ITR1_RMP where + * + * . . TI1_RMP can be one of the following values + * @arg @ref LL_TIM_TIM9_TI1_RMP_LSE + * @arg @ref LL_TIM_TIM9_TI1_RMP_GPIO + * + * . . ITR1_RMP can be one of the following values + * @arg @ref LL_TIM_TIM9_ITR1_RMP_TIM3_TGO (*) + * @arg @ref LL_TIM_TIM9_ITR1_RMP_TOUCH_IO (*) + * + * + * TIM10: any combination of TI1_RMP, ETR_RMP, TI1_RMP_RI where + * + * . . TI1_RMP can be one of the following values + * @arg @ref LL_TIM_TIM10_TI1_RMP_GPIO + * @arg @ref LL_TIM_TIM10_TI1_RMP_LSI + * @arg @ref LL_TIM_TIM10_TI1_RMP_LSE + * @arg @ref LL_TIM_TIM10_TI1_RMP_RTC + * + * . . ETR_RMP can be one of the following values + * @arg @ref LL_TIM_TIM10_ETR_RMP_TIM9_TGO (*) + * + * . . TI1_RMP_RI can be one of the following values + * @arg @ref LL_TIM_TIM10_TI1_RMP_RI (*) + * + * + * TIM11: any combination of TI1_RMP, ETR_RMP, TI1_RMP_RI where + * + * . . TI1_RMP can be one of the following values + * @arg @ref LL_TIM_TIM11_TI1_RMP_MSI + * @arg @ref LL_TIM_TIM11_TI1_RMP_HSE_RTC + * @arg @ref LL_TIM_TIM11_TI1_RMP + * + * . . ETR_RMP can be one of the following values + * @arg @ref LL_TIM_TIM11_ETR_RMP_TIM9_TGO (*) + * + * . . TI1_RMP_RI can be one of the following values + * @arg @ref LL_TIM_TIM11_TI1_RMP_RI (*) + * + * (*) value not available in all devices categories + * (**) register not available in all devices categories + * + * @note Option registers are available only for cat.3, cat.4 and cat.5 devices + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetRemap(TIM_TypeDef *TIMx, uint32_t Remap) +{ + MODIFY_REG(TIMx->OR, (Remap >> TIMx_OR_RMP_SHIFT), (Remap & TIMx_OR_RMP_MASK)); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_OCREF_Clear OCREF_Clear_Management + * @{ + */ +/** + * @brief Set the OCREF clear source + * @note The OCxREF signal of a given channel can be cleared when a high level is applied on the OCREF_CLR_INPUT + * @note This function can only be used in Output compare and PWM modes. + * @note the ETR signal can be connected to the output of a comparator to be used for current handling + * @rmtoll SMCR OCCS LL_TIM_SetOCRefClearInputSource + * @param TIMx Timer instance + * @param OCRefClearInputSource This parameter can be one of the following values: + * @arg @ref LL_TIM_OCREF_CLR_INT_OCREF_CLR + * @arg @ref LL_TIM_OCREF_CLR_INT_ETR + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetOCRefClearInputSource(TIM_TypeDef *TIMx, uint32_t OCRefClearInputSource) +{ + MODIFY_REG(TIMx->SMCR, TIM_SMCR_OCCS, OCRefClearInputSource); +} +/** + * @} + */ + +/** @defgroup TIM_LL_EF_FLAG_Management FLAG-Management + * @{ + */ +/** + * @brief Clear the update interrupt flag (UIF). + * @rmtoll SR UIF LL_TIM_ClearFlag_UPDATE + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_UPDATE(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_UIF)); +} + +/** + * @brief Indicate whether update interrupt flag (UIF) is set (update interrupt is pending). + * @rmtoll SR UIF LL_TIM_IsActiveFlag_UPDATE + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_UPDATE(TIM_TypeDef *TIMx) +{ + return (READ_BIT(TIMx->SR, TIM_SR_UIF) == (TIM_SR_UIF)); +} + +/** + * @brief Clear the Capture/Compare 1 interrupt flag (CC1F). + * @rmtoll SR CC1IF LL_TIM_ClearFlag_CC1 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_CC1(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_CC1IF)); +} + +/** + * @brief Indicate whether Capture/Compare 1 interrupt flag (CC1F) is set (Capture/Compare 1 interrupt is pending). + * @rmtoll SR CC1IF LL_TIM_IsActiveFlag_CC1 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC1(TIM_TypeDef *TIMx) +{ + return (READ_BIT(TIMx->SR, TIM_SR_CC1IF) == (TIM_SR_CC1IF)); +} + +/** + * @brief Clear the Capture/Compare 2 interrupt flag (CC2F). + * @rmtoll SR CC2IF LL_TIM_ClearFlag_CC2 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_CC2(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_CC2IF)); +} + +/** + * @brief Indicate whether Capture/Compare 2 interrupt flag (CC2F) is set (Capture/Compare 2 interrupt is pending). + * @rmtoll SR CC2IF LL_TIM_IsActiveFlag_CC2 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC2(TIM_TypeDef *TIMx) +{ + return (READ_BIT(TIMx->SR, TIM_SR_CC2IF) == (TIM_SR_CC2IF)); +} + +/** + * @brief Clear the Capture/Compare 3 interrupt flag (CC3F). + * @rmtoll SR CC3IF LL_TIM_ClearFlag_CC3 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_CC3(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_CC3IF)); +} + +/** + * @brief Indicate whether Capture/Compare 3 interrupt flag (CC3F) is set (Capture/Compare 3 interrupt is pending). + * @rmtoll SR CC3IF LL_TIM_IsActiveFlag_CC3 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC3(TIM_TypeDef *TIMx) +{ + return (READ_BIT(TIMx->SR, TIM_SR_CC3IF) == (TIM_SR_CC3IF)); +} + +/** + * @brief Clear the Capture/Compare 4 interrupt flag (CC4F). + * @rmtoll SR CC4IF LL_TIM_ClearFlag_CC4 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_CC4(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_CC4IF)); +} + +/** + * @brief Indicate whether Capture/Compare 4 interrupt flag (CC4F) is set (Capture/Compare 4 interrupt is pending). + * @rmtoll SR CC4IF LL_TIM_IsActiveFlag_CC4 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC4(TIM_TypeDef *TIMx) +{ + return (READ_BIT(TIMx->SR, TIM_SR_CC4IF) == (TIM_SR_CC4IF)); +} + +/** + * @brief Clear the trigger interrupt flag (TIF). + * @rmtoll SR TIF LL_TIM_ClearFlag_TRIG + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_TRIG(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_TIF)); +} + +/** + * @brief Indicate whether trigger interrupt flag (TIF) is set (trigger interrupt is pending). + * @rmtoll SR TIF LL_TIM_IsActiveFlag_TRIG + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_TRIG(TIM_TypeDef *TIMx) +{ + return (READ_BIT(TIMx->SR, TIM_SR_TIF) == (TIM_SR_TIF)); +} + +/** + * @brief Clear the Capture/Compare 1 over-capture interrupt flag (CC1OF). + * @rmtoll SR CC1OF LL_TIM_ClearFlag_CC1OVR + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_CC1OVR(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_CC1OF)); +} + +/** + * @brief Indicate whether Capture/Compare 1 over-capture interrupt flag (CC1OF) is set (Capture/Compare 1 interrupt is pending). + * @rmtoll SR CC1OF LL_TIM_IsActiveFlag_CC1OVR + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC1OVR(TIM_TypeDef *TIMx) +{ + return (READ_BIT(TIMx->SR, TIM_SR_CC1OF) == (TIM_SR_CC1OF)); +} + +/** + * @brief Clear the Capture/Compare 2 over-capture interrupt flag (CC2OF). + * @rmtoll SR CC2OF LL_TIM_ClearFlag_CC2OVR + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_CC2OVR(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_CC2OF)); +} + +/** + * @brief Indicate whether Capture/Compare 2 over-capture interrupt flag (CC2OF) is set (Capture/Compare 2 over-capture interrupt is pending). + * @rmtoll SR CC2OF LL_TIM_IsActiveFlag_CC2OVR + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC2OVR(TIM_TypeDef *TIMx) +{ + return (READ_BIT(TIMx->SR, TIM_SR_CC2OF) == (TIM_SR_CC2OF)); +} + +/** + * @brief Clear the Capture/Compare 3 over-capture interrupt flag (CC3OF). + * @rmtoll SR CC3OF LL_TIM_ClearFlag_CC3OVR + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_CC3OVR(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_CC3OF)); +} + +/** + * @brief Indicate whether Capture/Compare 3 over-capture interrupt flag (CC3OF) is set (Capture/Compare 3 over-capture interrupt is pending). + * @rmtoll SR CC3OF LL_TIM_IsActiveFlag_CC3OVR + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC3OVR(TIM_TypeDef *TIMx) +{ + return (READ_BIT(TIMx->SR, TIM_SR_CC3OF) == (TIM_SR_CC3OF)); +} + +/** + * @brief Clear the Capture/Compare 4 over-capture interrupt flag (CC4OF). + * @rmtoll SR CC4OF LL_TIM_ClearFlag_CC4OVR + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_CC4OVR(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_CC4OF)); +} + +/** + * @brief Indicate whether Capture/Compare 4 over-capture interrupt flag (CC4OF) is set (Capture/Compare 4 over-capture interrupt is pending). + * @rmtoll SR CC4OF LL_TIM_IsActiveFlag_CC4OVR + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC4OVR(TIM_TypeDef *TIMx) +{ + return (READ_BIT(TIMx->SR, TIM_SR_CC4OF) == (TIM_SR_CC4OF)); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_IT_Management IT-Management + * @{ + */ +/** + * @brief Enable update interrupt (UIE). + * @rmtoll DIER UIE LL_TIM_EnableIT_UPDATE + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableIT_UPDATE(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_UIE); +} + +/** + * @brief Disable update interrupt (UIE). + * @rmtoll DIER UIE LL_TIM_DisableIT_UPDATE + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableIT_UPDATE(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_UIE); +} + +/** + * @brief Indicates whether the update interrupt (UIE) is enabled. + * @rmtoll DIER UIE LL_TIM_IsEnabledIT_UPDATE + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_UPDATE(TIM_TypeDef *TIMx) +{ + return (READ_BIT(TIMx->DIER, TIM_DIER_UIE) == (TIM_DIER_UIE)); +} + +/** + * @brief Enable capture/compare 1 interrupt (CC1IE). + * @rmtoll DIER CC1IE LL_TIM_EnableIT_CC1 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableIT_CC1(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_CC1IE); +} + +/** + * @brief Disable capture/compare 1 interrupt (CC1IE). + * @rmtoll DIER CC1IE LL_TIM_DisableIT_CC1 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableIT_CC1(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_CC1IE); +} + +/** + * @brief Indicates whether the capture/compare 1 interrupt (CC1IE) is enabled. + * @rmtoll DIER CC1IE LL_TIM_IsEnabledIT_CC1 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_CC1(TIM_TypeDef *TIMx) +{ + return (READ_BIT(TIMx->DIER, TIM_DIER_CC1IE) == (TIM_DIER_CC1IE)); +} + +/** + * @brief Enable capture/compare 2 interrupt (CC2IE). + * @rmtoll DIER CC2IE LL_TIM_EnableIT_CC2 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableIT_CC2(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_CC2IE); +} + +/** + * @brief Disable capture/compare 2 interrupt (CC2IE). + * @rmtoll DIER CC2IE LL_TIM_DisableIT_CC2 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableIT_CC2(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_CC2IE); +} + +/** + * @brief Indicates whether the capture/compare 2 interrupt (CC2IE) is enabled. + * @rmtoll DIER CC2IE LL_TIM_IsEnabledIT_CC2 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_CC2(TIM_TypeDef *TIMx) +{ + return (READ_BIT(TIMx->DIER, TIM_DIER_CC2IE) == (TIM_DIER_CC2IE)); +} + +/** + * @brief Enable capture/compare 3 interrupt (CC3IE). + * @rmtoll DIER CC3IE LL_TIM_EnableIT_CC3 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableIT_CC3(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_CC3IE); +} + +/** + * @brief Disable capture/compare 3 interrupt (CC3IE). + * @rmtoll DIER CC3IE LL_TIM_DisableIT_CC3 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableIT_CC3(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_CC3IE); +} + +/** + * @brief Indicates whether the capture/compare 3 interrupt (CC3IE) is enabled. + * @rmtoll DIER CC3IE LL_TIM_IsEnabledIT_CC3 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_CC3(TIM_TypeDef *TIMx) +{ + return (READ_BIT(TIMx->DIER, TIM_DIER_CC3IE) == (TIM_DIER_CC3IE)); +} + +/** + * @brief Enable capture/compare 4 interrupt (CC4IE). + * @rmtoll DIER CC4IE LL_TIM_EnableIT_CC4 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableIT_CC4(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_CC4IE); +} + +/** + * @brief Disable capture/compare 4 interrupt (CC4IE). + * @rmtoll DIER CC4IE LL_TIM_DisableIT_CC4 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableIT_CC4(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_CC4IE); +} + +/** + * @brief Indicates whether the capture/compare 4 interrupt (CC4IE) is enabled. + * @rmtoll DIER CC4IE LL_TIM_IsEnabledIT_CC4 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_CC4(TIM_TypeDef *TIMx) +{ + return (READ_BIT(TIMx->DIER, TIM_DIER_CC4IE) == (TIM_DIER_CC4IE)); +} + +/** + * @brief Enable trigger interrupt (TIE). + * @rmtoll DIER TIE LL_TIM_EnableIT_TRIG + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableIT_TRIG(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_TIE); +} + +/** + * @brief Disable trigger interrupt (TIE). + * @rmtoll DIER TIE LL_TIM_DisableIT_TRIG + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableIT_TRIG(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_TIE); +} + +/** + * @brief Indicates whether the trigger interrupt (TIE) is enabled. + * @rmtoll DIER TIE LL_TIM_IsEnabledIT_TRIG + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_TRIG(TIM_TypeDef *TIMx) +{ + return (READ_BIT(TIMx->DIER, TIM_DIER_TIE) == (TIM_DIER_TIE)); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_DMA_Management DMA-Management + * @{ + */ +/** + * @brief Enable update DMA request (UDE). + * @rmtoll DIER UDE LL_TIM_EnableDMAReq_UPDATE + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableDMAReq_UPDATE(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_UDE); +} + +/** + * @brief Disable update DMA request (UDE). + * @rmtoll DIER UDE LL_TIM_DisableDMAReq_UPDATE + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableDMAReq_UPDATE(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_UDE); +} + +/** + * @brief Indicates whether the update DMA request (UDE) is enabled. + * @rmtoll DIER UDE LL_TIM_IsEnabledDMAReq_UPDATE + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledDMAReq_UPDATE(TIM_TypeDef *TIMx) +{ + return (READ_BIT(TIMx->DIER, TIM_DIER_UDE) == (TIM_DIER_UDE)); +} + +/** + * @brief Enable capture/compare 1 DMA request (CC1DE). + * @rmtoll DIER CC1DE LL_TIM_EnableDMAReq_CC1 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableDMAReq_CC1(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_CC1DE); +} + +/** + * @brief Disable capture/compare 1 DMA request (CC1DE). + * @rmtoll DIER CC1DE LL_TIM_DisableDMAReq_CC1 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableDMAReq_CC1(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_CC1DE); +} + +/** + * @brief Indicates whether the capture/compare 1 DMA request (CC1DE) is enabled. + * @rmtoll DIER CC1DE LL_TIM_IsEnabledDMAReq_CC1 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledDMAReq_CC1(TIM_TypeDef *TIMx) +{ + return (READ_BIT(TIMx->DIER, TIM_DIER_CC1DE) == (TIM_DIER_CC1DE)); +} + +/** + * @brief Enable capture/compare 2 DMA request (CC2DE). + * @rmtoll DIER CC2DE LL_TIM_EnableDMAReq_CC2 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableDMAReq_CC2(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_CC2DE); +} + +/** + * @brief Disable capture/compare 2 DMA request (CC2DE). + * @rmtoll DIER CC2DE LL_TIM_DisableDMAReq_CC2 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableDMAReq_CC2(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_CC2DE); +} + +/** + * @brief Indicates whether the capture/compare 2 DMA request (CC2DE) is enabled. + * @rmtoll DIER CC2DE LL_TIM_IsEnabledDMAReq_CC2 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledDMAReq_CC2(TIM_TypeDef *TIMx) +{ + return (READ_BIT(TIMx->DIER, TIM_DIER_CC2DE) == (TIM_DIER_CC2DE)); +} + +/** + * @brief Enable capture/compare 3 DMA request (CC3DE). + * @rmtoll DIER CC3DE LL_TIM_EnableDMAReq_CC3 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableDMAReq_CC3(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_CC3DE); +} + +/** + * @brief Disable capture/compare 3 DMA request (CC3DE). + * @rmtoll DIER CC3DE LL_TIM_DisableDMAReq_CC3 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableDMAReq_CC3(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_CC3DE); +} + +/** + * @brief Indicates whether the capture/compare 3 DMA request (CC3DE) is enabled. + * @rmtoll DIER CC3DE LL_TIM_IsEnabledDMAReq_CC3 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledDMAReq_CC3(TIM_TypeDef *TIMx) +{ + return (READ_BIT(TIMx->DIER, TIM_DIER_CC3DE) == (TIM_DIER_CC3DE)); +} + +/** + * @brief Enable capture/compare 4 DMA request (CC4DE). + * @rmtoll DIER CC4DE LL_TIM_EnableDMAReq_CC4 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableDMAReq_CC4(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_CC4DE); +} + +/** + * @brief Disable capture/compare 4 DMA request (CC4DE). + * @rmtoll DIER CC4DE LL_TIM_DisableDMAReq_CC4 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableDMAReq_CC4(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_CC4DE); +} + +/** + * @brief Indicates whether the capture/compare 4 DMA request (CC4DE) is enabled. + * @rmtoll DIER CC4DE LL_TIM_IsEnabledDMAReq_CC4 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledDMAReq_CC4(TIM_TypeDef *TIMx) +{ + return (READ_BIT(TIMx->DIER, TIM_DIER_CC4DE) == (TIM_DIER_CC4DE)); +} + +/** + * @brief Enable trigger interrupt (TDE). + * @rmtoll DIER TDE LL_TIM_EnableDMAReq_TRIG + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableDMAReq_TRIG(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_TDE); +} + +/** + * @brief Disable trigger interrupt (TDE). + * @rmtoll DIER TDE LL_TIM_DisableDMAReq_TRIG + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableDMAReq_TRIG(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_TDE); +} + +/** + * @brief Indicates whether the trigger interrupt (TDE) is enabled. + * @rmtoll DIER TDE LL_TIM_IsEnabledDMAReq_TRIG + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledDMAReq_TRIG(TIM_TypeDef *TIMx) +{ + return (READ_BIT(TIMx->DIER, TIM_DIER_TDE) == (TIM_DIER_TDE)); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_EVENT_Management EVENT-Management + * @{ + */ +/** + * @brief Generate an update event. + * @rmtoll EGR UG LL_TIM_GenerateEvent_UPDATE + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_GenerateEvent_UPDATE(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->EGR, TIM_EGR_UG); +} + +/** + * @brief Generate Capture/Compare 1 event. + * @rmtoll EGR CC1G LL_TIM_GenerateEvent_CC1 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_GenerateEvent_CC1(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->EGR, TIM_EGR_CC1G); +} + +/** + * @brief Generate Capture/Compare 2 event. + * @rmtoll EGR CC2G LL_TIM_GenerateEvent_CC2 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_GenerateEvent_CC2(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->EGR, TIM_EGR_CC2G); +} + +/** + * @brief Generate Capture/Compare 3 event. + * @rmtoll EGR CC3G LL_TIM_GenerateEvent_CC3 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_GenerateEvent_CC3(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->EGR, TIM_EGR_CC3G); +} + +/** + * @brief Generate Capture/Compare 4 event. + * @rmtoll EGR CC4G LL_TIM_GenerateEvent_CC4 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_GenerateEvent_CC4(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->EGR, TIM_EGR_CC4G); +} + +/** + * @brief Generate trigger event. + * @rmtoll EGR TG LL_TIM_GenerateEvent_TRIG + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_GenerateEvent_TRIG(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->EGR, TIM_EGR_TG); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup TIM_LL_EF_Init Initialisation and deinitialisation functions + * @{ + */ + +ErrorStatus LL_TIM_DeInit(TIM_TypeDef *TIMx); +void LL_TIM_StructInit(LL_TIM_InitTypeDef *TIM_InitStruct); +ErrorStatus LL_TIM_Init(TIM_TypeDef *TIMx, LL_TIM_InitTypeDef *TIM_InitStruct); +void LL_TIM_OC_StructInit(LL_TIM_OC_InitTypeDef *TIM_OC_InitStruct); +ErrorStatus LL_TIM_OC_Init(TIM_TypeDef *TIMx, uint32_t Channel, LL_TIM_OC_InitTypeDef *TIM_OC_InitStruct); +void LL_TIM_IC_StructInit(LL_TIM_IC_InitTypeDef *TIM_ICInitStruct); +ErrorStatus LL_TIM_IC_Init(TIM_TypeDef *TIMx, uint32_t Channel, LL_TIM_IC_InitTypeDef *TIM_IC_InitStruct); +void LL_TIM_ENCODER_StructInit(LL_TIM_ENCODER_InitTypeDef *TIM_EncoderInitStruct); +ErrorStatus LL_TIM_ENCODER_Init(TIM_TypeDef *TIMx, LL_TIM_ENCODER_InitTypeDef *TIM_EncoderInitStruct); +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* TIM2 || TIM3 || TIM4 || TIM5 || TIM9 || TIM10 || TIM11 TIM6 || TIM7 */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32L1xx_LL_TIM_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_ll_usart.h b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_ll_usart.h new file mode 100755 index 0000000..2618d94 --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_ll_usart.h @@ -0,0 +1,2539 @@ +/** + ****************************************************************************** + * @file stm32l1xx_ll_usart.h + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief Header file of USART LL module. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L1xx_LL_USART_H +#define __STM32L1xx_LL_USART_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx.h" + +/** @addtogroup STM32L1xx_LL_Driver + * @{ + */ + +#if defined (USART1) || defined (USART2) || defined (USART3) || defined (UART4) || defined (UART5) + +/** @defgroup USART_LL USART + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup USART_LL_Private_Constants USART Private Constants + * @{ + */ + +/* Defines used for the bit position in the register and perform offsets*/ +#define USART_POSITION_GTPR_GT USART_GTPR_GT_Pos +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup USART_LL_Private_Macros USART Private Macros + * @{ + */ +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup USART_LL_ES_INIT USART Exported Init structures + * @{ + */ + +/** + * @brief LL USART Init Structure definition + */ +typedef struct +{ + uint32_t BaudRate; /*!< This field defines expected Usart communication baud rate. + + This feature can be modified afterwards using unitary function @ref LL_USART_SetBaudRate().*/ + + uint32_t DataWidth; /*!< Specifies the number of data bits transmitted or received in a frame. + This parameter can be a value of @ref USART_LL_EC_DATAWIDTH. + + This feature can be modified afterwards using unitary function @ref LL_USART_SetDataWidth().*/ + + uint32_t StopBits; /*!< Specifies the number of stop bits transmitted. + This parameter can be a value of @ref USART_LL_EC_STOPBITS. + + This feature can be modified afterwards using unitary function @ref LL_USART_SetStopBitsLength().*/ + + uint32_t Parity; /*!< Specifies the parity mode. + This parameter can be a value of @ref USART_LL_EC_PARITY. + + This feature can be modified afterwards using unitary function @ref LL_USART_SetParity().*/ + + uint32_t TransferDirection; /*!< Specifies whether the Receive and/or Transmit mode is enabled or disabled. + This parameter can be a value of @ref USART_LL_EC_DIRECTION. + + This feature can be modified afterwards using unitary function @ref LL_USART_SetTransferDirection().*/ + + uint32_t HardwareFlowControl; /*!< Specifies whether the hardware flow control mode is enabled or disabled. + This parameter can be a value of @ref USART_LL_EC_HWCONTROL. + + This feature can be modified afterwards using unitary function @ref LL_USART_SetHWFlowCtrl().*/ + + uint32_t OverSampling; /*!< Specifies whether USART oversampling mode is 16 or 8. + This parameter can be a value of @ref USART_LL_EC_OVERSAMPLING. + + This feature can be modified afterwards using unitary function @ref LL_USART_SetOverSampling().*/ + +} LL_USART_InitTypeDef; + +/** + * @brief LL USART Clock Init Structure definition + */ +typedef struct +{ + uint32_t ClockOutput; /*!< Specifies whether the USART clock is enabled or disabled. + This parameter can be a value of @ref USART_LL_EC_CLOCK. + + USART HW configuration can be modified afterwards using unitary functions + @ref LL_USART_EnableSCLKOutput() or @ref LL_USART_DisableSCLKOutput(). + For more details, refer to description of this function. */ + + uint32_t ClockPolarity; /*!< Specifies the steady state of the serial clock. + This parameter can be a value of @ref USART_LL_EC_POLARITY. + + USART HW configuration can be modified afterwards using unitary functions @ref LL_USART_SetClockPolarity(). + For more details, refer to description of this function. */ + + uint32_t ClockPhase; /*!< Specifies the clock transition on which the bit capture is made. + This parameter can be a value of @ref USART_LL_EC_PHASE. + + USART HW configuration can be modified afterwards using unitary functions @ref LL_USART_SetClockPhase(). + For more details, refer to description of this function. */ + + uint32_t LastBitClockPulse; /*!< Specifies whether the clock pulse corresponding to the last transmitted + data bit (MSB) has to be output on the SCLK pin in synchronous mode. + This parameter can be a value of @ref USART_LL_EC_LASTCLKPULSE. + + USART HW configuration can be modified afterwards using unitary functions @ref LL_USART_SetLastClkPulseOutput(). + For more details, refer to description of this function. */ + +} LL_USART_ClockInitTypeDef; + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup USART_LL_Exported_Constants USART Exported Constants + * @{ + */ + +/** @defgroup USART_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_USART_ReadReg function + * @{ + */ +#define LL_USART_SR_PE USART_SR_PE /*!< Parity error flag */ +#define LL_USART_SR_FE USART_SR_FE /*!< Framing error flag */ +#define LL_USART_SR_NE USART_SR_NE /*!< Noise detected flag */ +#define LL_USART_SR_ORE USART_SR_ORE /*!< Overrun error flag */ +#define LL_USART_SR_IDLE USART_SR_IDLE /*!< Idle line detected flag */ +#define LL_USART_SR_RXNE USART_SR_RXNE /*!< Read data register not empty flag */ +#define LL_USART_SR_TC USART_SR_TC /*!< Transmission complete flag */ +#define LL_USART_SR_TXE USART_SR_TXE /*!< Transmit data register empty flag */ +#define LL_USART_SR_LBD USART_SR_LBD /*!< LIN break detection flag */ +#define LL_USART_SR_CTS USART_SR_CTS /*!< CTS flag */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_USART_ReadReg and LL_USART_WriteReg functions + * @{ + */ +#define LL_USART_CR1_IDLEIE USART_CR1_IDLEIE /*!< IDLE interrupt enable */ +#define LL_USART_CR1_RXNEIE USART_CR1_RXNEIE /*!< Read data register not empty interrupt enable */ +#define LL_USART_CR1_TCIE USART_CR1_TCIE /*!< Transmission complete interrupt enable */ +#define LL_USART_CR1_TXEIE USART_CR1_TXEIE /*!< Transmit data register empty interrupt enable */ +#define LL_USART_CR1_PEIE USART_CR1_PEIE /*!< Parity error */ +#define LL_USART_CR2_LBDIE USART_CR2_LBDIE /*!< LIN break detection interrupt enable */ +#define LL_USART_CR3_EIE USART_CR3_EIE /*!< Error interrupt enable */ +#define LL_USART_CR3_CTSIE USART_CR3_CTSIE /*!< CTS interrupt enable */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_DIRECTION Communication Direction + * @{ + */ +#define LL_USART_DIRECTION_NONE (uint32_t)0x00000000U /*!< Transmitter and Receiver are disabled */ +#define LL_USART_DIRECTION_RX USART_CR1_RE /*!< Transmitter is disabled and Receiver is enabled */ +#define LL_USART_DIRECTION_TX USART_CR1_TE /*!< Transmitter is enabled and Receiver is disabled */ +#define LL_USART_DIRECTION_TX_RX (USART_CR1_TE |USART_CR1_RE) /*!< Transmitter and Receiver are enabled */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_PARITY Parity Control + * @{ + */ +#define LL_USART_PARITY_NONE (uint32_t)0x00000000U /*!< Parity control disabled */ +#define LL_USART_PARITY_EVEN USART_CR1_PCE /*!< Parity control enabled and Even Parity is selected */ +#define LL_USART_PARITY_ODD (USART_CR1_PCE | USART_CR1_PS) /*!< Parity control enabled and Odd Parity is selected */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_WAKEUP Wakeup + * @{ + */ +#define LL_USART_WAKEUP_IDLELINE (uint32_t)0x00000000U /*!< USART wake up from Mute mode on Idle Line */ +#define LL_USART_WAKEUP_ADDRESSMARK USART_CR1_WAKE /*!< USART wake up from Mute mode on Address Mark */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_DATAWIDTH Datawidth + * @{ + */ +#define LL_USART_DATAWIDTH_8B (uint32_t)0x00000000U /*!< 8 bits word length : Start bit, 8 data bits, n stop bits */ +#define LL_USART_DATAWIDTH_9B USART_CR1_M /*!< 9 bits word length : Start bit, 9 data bits, n stop bits */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_OVERSAMPLING Oversampling + * @{ + */ +#define LL_USART_OVERSAMPLING_16 (uint32_t)0x00000000U /*!< Oversampling by 16 */ +#define LL_USART_OVERSAMPLING_8 USART_CR1_OVER8 /*!< Oversampling by 8 */ +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup USART_LL_EC_CLOCK Clock Signal + * @{ + */ + +#define LL_USART_CLOCK_DISABLE (uint32_t)0x00000000U /*!< Clock signal not provided */ +#define LL_USART_CLOCK_ENABLE USART_CR2_CLKEN /*!< Clock signal provided */ +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/** @defgroup USART_LL_EC_LASTCLKPULSE Last Clock Pulse + * @{ + */ +#define LL_USART_LASTCLKPULSE_NO_OUTPUT (uint32_t)0x00000000U /*!< The clock pulse of the last data bit is not output to the SCLK pin */ +#define LL_USART_LASTCLKPULSE_OUTPUT USART_CR2_LBCL /*!< The clock pulse of the last data bit is output to the SCLK pin */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_PHASE Clock Phase + * @{ + */ +#define LL_USART_PHASE_1EDGE (uint32_t)0x00000000U /*!< The first clock transition is the first data capture edge */ +#define LL_USART_PHASE_2EDGE USART_CR2_CPHA /*!< The second clock transition is the first data capture edge */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_POLARITY Clock Polarity + * @{ + */ +#define LL_USART_POLARITY_LOW (uint32_t)0x00000000U /*!< Steady low value on SCLK pin outside transmission window*/ +#define LL_USART_POLARITY_HIGH USART_CR2_CPOL /*!< Steady high value on SCLK pin outside transmission window */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_STOPBITS Stop Bits + * @{ + */ +#define LL_USART_STOPBITS_0_5 USART_CR2_STOP_0 /*!< 0.5 stop bit */ +#define LL_USART_STOPBITS_1 (uint32_t)0x00000000U /*!< 1 stop bit */ +#define LL_USART_STOPBITS_1_5 (USART_CR2_STOP_0 | USART_CR2_STOP_1) /*!< 1.5 stop bits */ +#define LL_USART_STOPBITS_2 USART_CR2_STOP_1 /*!< 2 stop bits */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_HWCONTROL Hardware Control + * @{ + */ +#define LL_USART_HWCONTROL_NONE (uint32_t)0x00000000U /*!< CTS and RTS hardware flow control disabled */ +#define LL_USART_HWCONTROL_RTS USART_CR3_RTSE /*!< RTS output enabled, data is only requested when there is space in the receive buffer */ +#define LL_USART_HWCONTROL_CTS USART_CR3_CTSE /*!< CTS mode enabled, data is only transmitted when the nCTS input is asserted (tied to 0) */ +#define LL_USART_HWCONTROL_RTS_CTS (USART_CR3_RTSE | USART_CR3_CTSE) /*!< CTS and RTS hardware flow control enabled */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_IRDA_POWER IrDA Power + * @{ + */ +#define LL_USART_IRDA_POWER_NORMAL (uint32_t)0x00000000U /*!< IrDA normal power mode */ +#define LL_USART_IRDA_POWER_LOW USART_CR3_IRLP /*!< IrDA low power mode */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_LINBREAK_DETECT LIN Break Detection Length + * @{ + */ +#define LL_USART_LINBREAK_DETECT_10B (uint32_t)0x00000000U /*!< 10-bit break detection method selected */ +#define LL_USART_LINBREAK_DETECT_11B USART_CR2_LBDL /*!< 11-bit break detection method selected */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup USART_LL_Exported_Macros USART Exported Macros + * @{ + */ + +/** @defgroup USART_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in USART register + * @param __INSTANCE__ USART Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_USART_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in USART register + * @param __INSTANCE__ USART Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_USART_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** @defgroup USART_LL_EM_Exported_Macros_Helper Exported_Macros_Helper + * @{ + */ + +/** + * @brief Compute USARTDIV value according to Peripheral Clock and + * expected Baud Rate in 8 bits sampling mode (32 bits value of USARTDIV is returned) + * @param __PERIPHCLK__ Peripheral Clock frequency used for USART instance + * @param __BAUDRATE__ Baud rate value to achieve + * @retval USARTDIV value to be used for BRR register filling in OverSampling_8 case + */ +#define __LL_USART_DIV_SAMPLING8_100(__PERIPHCLK__, __BAUDRATE__) (((__PERIPHCLK__)*25)/(2*(__BAUDRATE__))) +#define __LL_USART_DIVMANT_SAMPLING8(__PERIPHCLK__, __BAUDRATE__) (__LL_USART_DIV_SAMPLING8_100((__PERIPHCLK__), (__BAUDRATE__))/100) +#define __LL_USART_DIVFRAQ_SAMPLING8(__PERIPHCLK__, __BAUDRATE__) (((__LL_USART_DIV_SAMPLING8_100((__PERIPHCLK__), (__BAUDRATE__)) - (__LL_USART_DIVMANT_SAMPLING8((__PERIPHCLK__), (__BAUDRATE__)) * 100)) * 8 + 50) / 100) +/* UART BRR = mantissa + overflow + fraction + = (UART DIVMANT << 4) + ((UART DIVFRAQ & 0xF8) << 1) + (UART DIVFRAQ & 0x07) */ +#define __LL_USART_DIV_SAMPLING8(__PERIPHCLK__, __BAUDRATE__) (((__LL_USART_DIVMANT_SAMPLING8((__PERIPHCLK__), (__BAUDRATE__)) << 4) + \ + ((__LL_USART_DIVFRAQ_SAMPLING8((__PERIPHCLK__), (__BAUDRATE__)) & 0xF8) << 1)) + \ + (__LL_USART_DIVFRAQ_SAMPLING8((__PERIPHCLK__), (__BAUDRATE__)) & 0x07)) + +/** + * @brief Compute USARTDIV value according to Peripheral Clock and + * expected Baud Rate in 16 bits sampling mode (32 bits value of USARTDIV is returned) + * @param __PERIPHCLK__ Peripheral Clock frequency used for USART instance + * @param __BAUDRATE__ Baud rate value to achieve + * @retval USARTDIV value to be used for BRR register filling in OverSampling_16 case + */ +#define __LL_USART_DIV_SAMPLING16_100(__PERIPHCLK__, __BAUDRATE__) (((__PERIPHCLK__)*25)/(4*(__BAUDRATE__))) +#define __LL_USART_DIVMANT_SAMPLING16(__PERIPHCLK__, __BAUDRATE__) (__LL_USART_DIV_SAMPLING16_100((__PERIPHCLK__), (__BAUDRATE__))/100) +#define __LL_USART_DIVFRAQ_SAMPLING16(__PERIPHCLK__, __BAUDRATE__) (((__LL_USART_DIV_SAMPLING16_100((__PERIPHCLK__), (__BAUDRATE__)) - (__LL_USART_DIVMANT_SAMPLING16((__PERIPHCLK__), (__BAUDRATE__)) * 100)) * 16 + 50) / 100) +/* USART BRR = mantissa + overflow + fraction + = (USART DIVMANT << 4) + (USART DIVFRAQ & 0xF0) + (USART DIVFRAQ & 0x0F) */ +#define __LL_USART_DIV_SAMPLING16(__PERIPHCLK__, __BAUDRATE__) (((__LL_USART_DIVMANT_SAMPLING16((__PERIPHCLK__), (__BAUDRATE__)) << 4) + \ + (__LL_USART_DIVFRAQ_SAMPLING16((__PERIPHCLK__), (__BAUDRATE__)) & 0xF0)) + \ + (__LL_USART_DIVFRAQ_SAMPLING16((__PERIPHCLK__), (__BAUDRATE__)) & 0x0F)) + +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup USART_LL_Exported_Functions USART Exported Functions + * @{ + */ + +/** @defgroup USART_LL_EF_Configuration Configuration functions + * @{ + */ + +/** + * @brief USART Enable + * @rmtoll CR1 UE LL_USART_Enable + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_Enable(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR1, USART_CR1_UE); +} + +/** + * @brief USART Disable (all USART prescalers and outputs are disabled) + * @note When USART is disabled, USART prescalers and outputs are stopped immediately, + * and current operations are discarded. The configuration of the USART is kept, but all the status + * flags, in the USARTx_SR are set to their default values. + * @rmtoll CR1 UE LL_USART_Disable + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_Disable(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR1, USART_CR1_UE); +} + +/** + * @brief Indicate if USART is enabled + * @rmtoll CR1 UE LL_USART_IsEnabled + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabled(USART_TypeDef *USARTx) +{ + return (READ_BIT(USARTx->CR1, USART_CR1_UE) == (USART_CR1_UE)); +} + +/** + * @brief Receiver Enable (Receiver is enabled and begins searching for a start bit) + * @rmtoll CR1 RE LL_USART_EnableDirectionRx + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableDirectionRx(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR1, USART_CR1_RE); +} + +/** + * @brief Receiver Disable + * @rmtoll CR1 RE LL_USART_DisableDirectionRx + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableDirectionRx(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR1, USART_CR1_RE); +} + +/** + * @brief Transmitter Enable + * @rmtoll CR1 TE LL_USART_EnableDirectionTx + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableDirectionTx(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR1, USART_CR1_TE); +} + +/** + * @brief Transmitter Disable + * @rmtoll CR1 TE LL_USART_DisableDirectionTx + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableDirectionTx(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR1, USART_CR1_TE); +} + +/** + * @brief Configure simultaneously enabled/disabled states + * of Transmitter and Receiver + * @rmtoll CR1 RE LL_USART_SetTransferDirection\n + * CR1 TE LL_USART_SetTransferDirection + * @param USARTx USART Instance + * @param TransferDirection This parameter can be one of the following values: + * @arg @ref LL_USART_DIRECTION_NONE + * @arg @ref LL_USART_DIRECTION_RX + * @arg @ref LL_USART_DIRECTION_TX + * @arg @ref LL_USART_DIRECTION_TX_RX + * @retval None + */ +__STATIC_INLINE void LL_USART_SetTransferDirection(USART_TypeDef *USARTx, uint32_t TransferDirection) +{ + MODIFY_REG(USARTx->CR1, USART_CR1_RE | USART_CR1_TE, TransferDirection); +} + +/** + * @brief Return enabled/disabled states of Transmitter and Receiver + * @rmtoll CR1 RE LL_USART_GetTransferDirection\n + * CR1 TE LL_USART_GetTransferDirection + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_DIRECTION_NONE + * @arg @ref LL_USART_DIRECTION_RX + * @arg @ref LL_USART_DIRECTION_TX + * @arg @ref LL_USART_DIRECTION_TX_RX + */ +__STATIC_INLINE uint32_t LL_USART_GetTransferDirection(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_RE | USART_CR1_TE)); +} + +/** + * @brief Configure Parity (enabled/disabled and parity mode if enabled). + * @note This function selects if hardware parity control (generation and detection) is enabled or disabled. + * When the parity control is enabled (Odd or Even), computed parity bit is inserted at the MSB position + * (9th or 8th bit depending on data width) and parity is checked on the received data. + * @rmtoll CR1 PS LL_USART_SetParity\n + * CR1 PCE LL_USART_SetParity + * @param USARTx USART Instance + * @param Parity This parameter can be one of the following values: + * @arg @ref LL_USART_PARITY_NONE + * @arg @ref LL_USART_PARITY_EVEN + * @arg @ref LL_USART_PARITY_ODD + * @retval None + */ +__STATIC_INLINE void LL_USART_SetParity(USART_TypeDef *USARTx, uint32_t Parity) +{ + MODIFY_REG(USARTx->CR1, USART_CR1_PS | USART_CR1_PCE, Parity); +} + +/** + * @brief Return Parity configuration (enabled/disabled and parity mode if enabled) + * @rmtoll CR1 PS LL_USART_GetParity\n + * CR1 PCE LL_USART_GetParity + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_PARITY_NONE + * @arg @ref LL_USART_PARITY_EVEN + * @arg @ref LL_USART_PARITY_ODD + */ +__STATIC_INLINE uint32_t LL_USART_GetParity(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_PS | USART_CR1_PCE)); +} + +/** + * @brief Set Receiver Wake Up method from Mute mode. + * @rmtoll CR1 WAKE LL_USART_SetWakeUpMethod + * @param USARTx USART Instance + * @param Method This parameter can be one of the following values: + * @arg @ref LL_USART_WAKEUP_IDLELINE + * @arg @ref LL_USART_WAKEUP_ADDRESSMARK + * @retval None + */ +__STATIC_INLINE void LL_USART_SetWakeUpMethod(USART_TypeDef *USARTx, uint32_t Method) +{ + MODIFY_REG(USARTx->CR1, USART_CR1_WAKE, Method); +} + +/** + * @brief Return Receiver Wake Up method from Mute mode + * @rmtoll CR1 WAKE LL_USART_GetWakeUpMethod + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_WAKEUP_IDLELINE + * @arg @ref LL_USART_WAKEUP_ADDRESSMARK + */ +__STATIC_INLINE uint32_t LL_USART_GetWakeUpMethod(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_WAKE)); +} + +/** + * @brief Set Word length (i.e. nb of data bits, excluding start and stop bits) + * @rmtoll CR1 M LL_USART_SetDataWidth + * @param USARTx USART Instance + * @param DataWidth This parameter can be one of the following values: + * @arg @ref LL_USART_DATAWIDTH_8B + * @arg @ref LL_USART_DATAWIDTH_9B + * @retval None + */ +__STATIC_INLINE void LL_USART_SetDataWidth(USART_TypeDef *USARTx, uint32_t DataWidth) +{ + MODIFY_REG(USARTx->CR1, USART_CR1_M, DataWidth); +} + +/** + * @brief Return Word length (i.e. nb of data bits, excluding start and stop bits) + * @rmtoll CR1 M LL_USART_GetDataWidth + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_DATAWIDTH_8B + * @arg @ref LL_USART_DATAWIDTH_9B + */ +__STATIC_INLINE uint32_t LL_USART_GetDataWidth(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_M)); +} + +/** + * @brief Set Oversampling to 8-bit or 16-bit mode + * @rmtoll CR1 OVER8 LL_USART_SetOverSampling + * @param USARTx USART Instance + * @param OverSampling This parameter can be one of the following values: + * @arg @ref LL_USART_OVERSAMPLING_16 + * @arg @ref LL_USART_OVERSAMPLING_8 + * @retval None + */ +__STATIC_INLINE void LL_USART_SetOverSampling(USART_TypeDef *USARTx, uint32_t OverSampling) +{ + MODIFY_REG(USARTx->CR1, USART_CR1_OVER8, OverSampling); +} + +/** + * @brief Return Oversampling mode + * @rmtoll CR1 OVER8 LL_USART_GetOverSampling + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_OVERSAMPLING_16 + * @arg @ref LL_USART_OVERSAMPLING_8 + */ +__STATIC_INLINE uint32_t LL_USART_GetOverSampling(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_OVER8)); +} + +/** + * @brief Configure if Clock pulse of the last data bit is output to the SCLK pin or not + * @note Macro @ref IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 LBCL LL_USART_SetLastClkPulseOutput + * @param USARTx USART Instance + * @param LastBitClockPulse This parameter can be one of the following values: + * @arg @ref LL_USART_LASTCLKPULSE_NO_OUTPUT + * @arg @ref LL_USART_LASTCLKPULSE_OUTPUT + * @retval None + */ +__STATIC_INLINE void LL_USART_SetLastClkPulseOutput(USART_TypeDef *USARTx, uint32_t LastBitClockPulse) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_LBCL, LastBitClockPulse); +} + +/** + * @brief Retrieve Clock pulse of the last data bit output configuration + * (Last bit Clock pulse output to the SCLK pin or not) + * @note Macro @ref IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 LBCL LL_USART_GetLastClkPulseOutput + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_LASTCLKPULSE_NO_OUTPUT + * @arg @ref LL_USART_LASTCLKPULSE_OUTPUT + */ +__STATIC_INLINE uint32_t LL_USART_GetLastClkPulseOutput(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_LBCL)); +} + +/** + * @brief Select the phase of the clock output on the SCLK pin in synchronous mode + * @note Macro @ref IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 CPHA LL_USART_SetClockPhase + * @param USARTx USART Instance + * @param ClockPhase This parameter can be one of the following values: + * @arg @ref LL_USART_PHASE_1EDGE + * @arg @ref LL_USART_PHASE_2EDGE + * @retval None + */ +__STATIC_INLINE void LL_USART_SetClockPhase(USART_TypeDef *USARTx, uint32_t ClockPhase) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_CPHA, ClockPhase); +} + +/** + * @brief Return phase of the clock output on the SCLK pin in synchronous mode + * @note Macro @ref IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 CPHA LL_USART_GetClockPhase + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_PHASE_1EDGE + * @arg @ref LL_USART_PHASE_2EDGE + */ +__STATIC_INLINE uint32_t LL_USART_GetClockPhase(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_CPHA)); +} + +/** + * @brief Select the polarity of the clock output on the SCLK pin in synchronous mode + * @note Macro @ref IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 CPOL LL_USART_SetClockPolarity + * @param USARTx USART Instance + * @param ClockPolarity This parameter can be one of the following values: + * @arg @ref LL_USART_POLARITY_LOW + * @arg @ref LL_USART_POLARITY_HIGH + * @retval None + */ +__STATIC_INLINE void LL_USART_SetClockPolarity(USART_TypeDef *USARTx, uint32_t ClockPolarity) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_CPOL, ClockPolarity); +} + +/** + * @brief Return polarity of the clock output on the SCLK pin in synchronous mode + * @note Macro @ref IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 CPOL LL_USART_GetClockPolarity + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_POLARITY_LOW + * @arg @ref LL_USART_POLARITY_HIGH + */ +__STATIC_INLINE uint32_t LL_USART_GetClockPolarity(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_CPOL)); +} + +/** + * @brief Configure Clock signal format (Phase Polarity and choice about output of last bit clock pulse) + * @note Macro @ref IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @note Call of this function is equivalent to following function call sequence : + * - Clock Phase configuration using @ref LL_USART_SetClockPhase() function + * - Clock Polarity configuration using @ref LL_USART_SetClockPolarity() function + * - Output of Last bit Clock pulse configuration using @ref LL_USART_SetLastClkPulseOutput() function + * @rmtoll CR2 CPHA LL_USART_ConfigClock\n + * CR2 CPOL LL_USART_ConfigClock\n + * CR2 LBCL LL_USART_ConfigClock + * @param USARTx USART Instance + * @param Phase This parameter can be one of the following values: + * @arg @ref LL_USART_PHASE_1EDGE + * @arg @ref LL_USART_PHASE_2EDGE + * @param Polarity This parameter can be one of the following values: + * @arg @ref LL_USART_POLARITY_LOW + * @arg @ref LL_USART_POLARITY_HIGH + * @param LBCPOutput This parameter can be one of the following values: + * @arg @ref LL_USART_LASTCLKPULSE_NO_OUTPUT + * @arg @ref LL_USART_LASTCLKPULSE_OUTPUT + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigClock(USART_TypeDef *USARTx, uint32_t Phase, uint32_t Polarity, uint32_t LBCPOutput) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_CPHA | USART_CR2_CPOL | USART_CR2_LBCL, Phase | Polarity | LBCPOutput); +} + +/** + * @brief Enable Clock output on SCLK pin + * @note Macro @ref IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 CLKEN LL_USART_EnableSCLKOutput + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableSCLKOutput(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR2, USART_CR2_CLKEN); +} + +/** + * @brief Disable Clock output on SCLK pin + * @note Macro @ref IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 CLKEN LL_USART_DisableSCLKOutput + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableSCLKOutput(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR2, USART_CR2_CLKEN); +} + +/** + * @brief Indicate if Clock output on SCLK pin is enabled + * @note Macro @ref IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 CLKEN LL_USART_IsEnabledSCLKOutput + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledSCLKOutput(USART_TypeDef *USARTx) +{ + return (READ_BIT(USARTx->CR2, USART_CR2_CLKEN) == (USART_CR2_CLKEN)); +} + +/** + * @brief Set the length of the stop bits + * @rmtoll CR2 STOP LL_USART_SetStopBitsLength + * @param USARTx USART Instance + * @param StopBits This parameter can be one of the following values: + * @arg @ref LL_USART_STOPBITS_0_5 + * @arg @ref LL_USART_STOPBITS_1 + * @arg @ref LL_USART_STOPBITS_1_5 + * @arg @ref LL_USART_STOPBITS_2 + * @retval None + */ +__STATIC_INLINE void LL_USART_SetStopBitsLength(USART_TypeDef *USARTx, uint32_t StopBits) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_STOP, StopBits); +} + +/** + * @brief Retrieve the length of the stop bits + * @rmtoll CR2 STOP LL_USART_GetStopBitsLength + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_STOPBITS_0_5 + * @arg @ref LL_USART_STOPBITS_1 + * @arg @ref LL_USART_STOPBITS_1_5 + * @arg @ref LL_USART_STOPBITS_2 + */ +__STATIC_INLINE uint32_t LL_USART_GetStopBitsLength(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_STOP)); +} + +/** + * @brief Configure Character frame format (Datawidth, Parity control, Stop Bits) + * @note Call of this function is equivalent to following function call sequence : + * - Data Width configuration using @ref LL_USART_SetDataWidth() function + * - Parity Control and mode configuration using @ref LL_USART_SetParity() function + * - Stop bits configuration using @ref LL_USART_SetStopBitsLength() function + * @rmtoll CR1 PS LL_USART_ConfigCharacter\n + * CR1 PCE LL_USART_ConfigCharacter\n + * CR1 M LL_USART_ConfigCharacter\n + * CR2 STOP LL_USART_ConfigCharacter + * @param USARTx USART Instance + * @param DataWidth This parameter can be one of the following values: + * @arg @ref LL_USART_DATAWIDTH_8B + * @arg @ref LL_USART_DATAWIDTH_9B + * @param Parity This parameter can be one of the following values: + * @arg @ref LL_USART_PARITY_NONE + * @arg @ref LL_USART_PARITY_EVEN + * @arg @ref LL_USART_PARITY_ODD + * @param StopBits This parameter can be one of the following values: + * @arg @ref LL_USART_STOPBITS_0_5 + * @arg @ref LL_USART_STOPBITS_1 + * @arg @ref LL_USART_STOPBITS_1_5 + * @arg @ref LL_USART_STOPBITS_2 + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigCharacter(USART_TypeDef *USARTx, uint32_t DataWidth, uint32_t Parity, + uint32_t StopBits) +{ + MODIFY_REG(USARTx->CR1, USART_CR1_PS | USART_CR1_PCE | USART_CR1_M, Parity | DataWidth); + MODIFY_REG(USARTx->CR2, USART_CR2_STOP, StopBits); +} + +/** + * @brief Set Address of the USART node. + * @note This is used in multiprocessor communication during Mute mode or Stop mode, + * for wake up with address mark detection. + * @rmtoll CR2 ADD LL_USART_SetNodeAddress + * @param USARTx USART Instance + * @param NodeAddress 4 bit Address of the USART node. + * @retval None + */ +__STATIC_INLINE void LL_USART_SetNodeAddress(USART_TypeDef *USARTx, uint32_t NodeAddress) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_ADD, (NodeAddress & USART_CR2_ADD)); +} + +/** + * @brief Return 4 bit Address of the USART node as set in ADD field of CR2. + * @note only 4bits (b3-b0) of returned value are relevant (b31-b4 are not relevant) + * @rmtoll CR2 ADD LL_USART_GetNodeAddress + * @param USARTx USART Instance + * @retval Address of the USART node (Value between Min_Data=0 and Max_Data=255) + */ +__STATIC_INLINE uint32_t LL_USART_GetNodeAddress(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_ADD)); +} + +/** + * @brief Enable RTS HW Flow Control + * @note Macro @ref IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 RTSE LL_USART_EnableRTSHWFlowCtrl + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableRTSHWFlowCtrl(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_RTSE); +} + +/** + * @brief Disable RTS HW Flow Control + * @note Macro @ref IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 RTSE LL_USART_DisableRTSHWFlowCtrl + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableRTSHWFlowCtrl(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_RTSE); +} + +/** + * @brief Enable CTS HW Flow Control + * @note Macro @ref IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 CTSE LL_USART_EnableCTSHWFlowCtrl + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableCTSHWFlowCtrl(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_CTSE); +} + +/** + * @brief Disable CTS HW Flow Control + * @note Macro @ref IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 CTSE LL_USART_DisableCTSHWFlowCtrl + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableCTSHWFlowCtrl(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_CTSE); +} + +/** + * @brief Configure HW Flow Control mode (both CTS and RTS) + * @note Macro @ref IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 RTSE LL_USART_SetHWFlowCtrl\n + * CR3 CTSE LL_USART_SetHWFlowCtrl + * @param USARTx USART Instance + * @param HardwareFlowControl This parameter can be one of the following values: + * @arg @ref LL_USART_HWCONTROL_NONE + * @arg @ref LL_USART_HWCONTROL_RTS + * @arg @ref LL_USART_HWCONTROL_CTS + * @arg @ref LL_USART_HWCONTROL_RTS_CTS + * @retval None + */ +__STATIC_INLINE void LL_USART_SetHWFlowCtrl(USART_TypeDef *USARTx, uint32_t HardwareFlowControl) +{ + MODIFY_REG(USARTx->CR3, USART_CR3_RTSE | USART_CR3_CTSE, HardwareFlowControl); +} + +/** + * @brief Return HW Flow Control configuration (both CTS and RTS) + * @note Macro @ref IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 RTSE LL_USART_GetHWFlowCtrl\n + * CR3 CTSE LL_USART_GetHWFlowCtrl + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_HWCONTROL_NONE + * @arg @ref LL_USART_HWCONTROL_RTS + * @arg @ref LL_USART_HWCONTROL_CTS + * @arg @ref LL_USART_HWCONTROL_RTS_CTS + */ +__STATIC_INLINE uint32_t LL_USART_GetHWFlowCtrl(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR3, USART_CR3_RTSE | USART_CR3_CTSE)); +} + +/** + * @brief Enable One bit sampling method + * @rmtoll CR3 ONEBIT LL_USART_EnableOneBitSamp + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableOneBitSamp(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_ONEBIT); +} + +/** + * @brief Disable One bit sampling method + * @rmtoll CR3 ONEBIT LL_USART_DisableOneBitSamp + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableOneBitSamp(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_ONEBIT); +} + +/** + * @brief Indicate if One bit sampling method is enabled + * @rmtoll CR3 ONEBIT LL_USART_IsEnabledOneBitSamp + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledOneBitSamp(USART_TypeDef *USARTx) +{ + return (READ_BIT(USARTx->CR3, USART_CR3_ONEBIT) == (USART_CR3_ONEBIT)); +} + +/** + * @brief Configure USART BRR register for achieving expected Baud Rate value. + * @note Compute and set USARTDIV value in BRR Register (full BRR content) + * according to used Peripheral Clock, Oversampling mode, and expected Baud Rate values + * @note Peripheral clock and Baud rate values provided as function parameters should be valid + * (Baud rate value != 0) + * @rmtoll BRR BRR LL_USART_SetBaudRate + * @param USARTx USART Instance + * @param PeriphClk Peripheral Clock + * @param OverSampling This parameter can be one of the following values: + * @arg @ref LL_USART_OVERSAMPLING_16 + * @arg @ref LL_USART_OVERSAMPLING_8 + * @param BaudRate Baud Rate + * @retval None + */ +__STATIC_INLINE void LL_USART_SetBaudRate(USART_TypeDef *USARTx, uint32_t PeriphClk, uint32_t OverSampling, + uint32_t BaudRate) +{ + if (OverSampling == LL_USART_OVERSAMPLING_8) + { + USARTx->BRR = (uint16_t)(__LL_USART_DIV_SAMPLING8(PeriphClk, BaudRate)); + } + else + { + USARTx->BRR = (uint16_t)(__LL_USART_DIV_SAMPLING16(PeriphClk, BaudRate)); + } +} + +/** + * @brief Return current Baud Rate value, according to USARTDIV present in BRR register + * (full BRR content), and to used Peripheral Clock and Oversampling mode values + * @note In case of non-initialized or invalid value stored in BRR register, value 0 will be returned. + * @rmtoll BRR BRR LL_USART_GetBaudRate + * @param USARTx USART Instance + * @param PeriphClk Peripheral Clock + * @param OverSampling This parameter can be one of the following values: + * @arg @ref LL_USART_OVERSAMPLING_16 + * @arg @ref LL_USART_OVERSAMPLING_8 + * @retval Baud Rate + */ +__STATIC_INLINE uint32_t LL_USART_GetBaudRate(USART_TypeDef *USARTx, uint32_t PeriphClk, uint32_t OverSampling) +{ + register uint32_t usartdiv = 0x0U; + register uint32_t brrresult = 0x0U; + + usartdiv = USARTx->BRR; + + if (OverSampling == LL_USART_OVERSAMPLING_8) + { + if ((usartdiv & 0xFFF7U) != 0U) + { + usartdiv = (uint16_t)((usartdiv & 0xFFF0U) | ((usartdiv & 0x0007U) << 1U)) ; + brrresult = (PeriphClk * 2U) / usartdiv; + } + } + else + { + if ((usartdiv & 0xFFFFU) != 0U) + { + brrresult = PeriphClk / usartdiv; + } + } + return (brrresult); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_Configuration_IRDA Configuration functions related to Irda feature + * @{ + */ + +/** + * @brief Enable IrDA mode + * @note Macro @ref IS_IRDA_INSTANCE(USARTx) can be used to check whether or not + * IrDA feature is supported by the USARTx instance. + * @rmtoll CR3 IREN LL_USART_EnableIrda + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIrda(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_IREN); +} + +/** + * @brief Disable IrDA mode + * @note Macro @ref IS_IRDA_INSTANCE(USARTx) can be used to check whether or not + * IrDA feature is supported by the USARTx instance. + * @rmtoll CR3 IREN LL_USART_DisableIrda + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIrda(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_IREN); +} + +/** + * @brief Indicate if IrDA mode is enabled + * @note Macro @ref IS_IRDA_INSTANCE(USARTx) can be used to check whether or not + * IrDA feature is supported by the USARTx instance. + * @rmtoll CR3 IREN LL_USART_IsEnabledIrda + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIrda(USART_TypeDef *USARTx) +{ + return (READ_BIT(USARTx->CR3, USART_CR3_IREN) == (USART_CR3_IREN)); +} + +/** + * @brief Configure IrDA Power Mode (Normal or Low Power) + * @note Macro @ref IS_IRDA_INSTANCE(USARTx) can be used to check whether or not + * IrDA feature is supported by the USARTx instance. + * @rmtoll CR3 IRLP LL_USART_SetIrdaPowerMode + * @param USARTx USART Instance + * @param PowerMode This parameter can be one of the following values: + * @arg @ref LL_USART_IRDA_POWER_NORMAL + * @arg @ref LL_USART_IRDA_POWER_LOW + * @retval None + */ +__STATIC_INLINE void LL_USART_SetIrdaPowerMode(USART_TypeDef *USARTx, uint32_t PowerMode) +{ + MODIFY_REG(USARTx->CR3, USART_CR3_IRLP, PowerMode); +} + +/** + * @brief Retrieve IrDA Power Mode configuration (Normal or Low Power) + * @note Macro @ref IS_IRDA_INSTANCE(USARTx) can be used to check whether or not + * IrDA feature is supported by the USARTx instance. + * @rmtoll CR3 IRLP LL_USART_GetIrdaPowerMode + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_IRDA_POWER_NORMAL + * @arg @ref LL_USART_PHASE_2EDGE + */ +__STATIC_INLINE uint32_t LL_USART_GetIrdaPowerMode(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR3, USART_CR3_IRLP)); +} + +/** + * @brief Set Irda prescaler value, used for dividing the USART clock source + * to achieve the Irda Low Power frequency (8 bits value) + * @note Macro @ref IS_IRDA_INSTANCE(USARTx) can be used to check whether or not + * IrDA feature is supported by the USARTx instance. + * @rmtoll GTPR PSC LL_USART_SetIrdaPrescaler + * @param USARTx USART Instance + * @param PrescalerValue Value between Min_Data=0x00 and Max_Data=0xFF + * @retval None + */ +__STATIC_INLINE void LL_USART_SetIrdaPrescaler(USART_TypeDef *USARTx, uint32_t PrescalerValue) +{ + MODIFY_REG(USARTx->GTPR, USART_GTPR_PSC, PrescalerValue); +} + +/** + * @brief Return Irda prescaler value, used for dividing the USART clock source + * to achieve the Irda Low Power frequency (8 bits value) + * @note Macro @ref IS_IRDA_INSTANCE(USARTx) can be used to check whether or not + * IrDA feature is supported by the USARTx instance. + * @rmtoll GTPR PSC LL_USART_GetIrdaPrescaler + * @param USARTx USART Instance + * @retval Irda prescaler value (Value between Min_Data=0x00 and Max_Data=0xFF) + */ +__STATIC_INLINE uint32_t LL_USART_GetIrdaPrescaler(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->GTPR, USART_GTPR_PSC)); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_Configuration_Smartcard Configuration functions related to Smartcard feature + * @{ + */ + +/** + * @brief Enable Smartcard NACK transmission + * @note Macro @ref IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR3 NACK LL_USART_EnableSmartcardNACK + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableSmartcardNACK(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_NACK); +} + +/** + * @brief Disable Smartcard NACK transmission + * @note Macro @ref IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR3 NACK LL_USART_DisableSmartcardNACK + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableSmartcardNACK(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_NACK); +} + +/** + * @brief Indicate if Smartcard NACK transmission is enabled + * @note Macro @ref IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR3 NACK LL_USART_IsEnabledSmartcardNACK + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledSmartcardNACK(USART_TypeDef *USARTx) +{ + return (READ_BIT(USARTx->CR3, USART_CR3_NACK) == (USART_CR3_NACK)); +} + +/** + * @brief Enable Smartcard mode + * @note Macro @ref IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR3 SCEN LL_USART_EnableSmartcard + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableSmartcard(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_SCEN); +} + +/** + * @brief Disable Smartcard mode + * @note Macro @ref IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR3 SCEN LL_USART_DisableSmartcard + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableSmartcard(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_SCEN); +} + +/** + * @brief Indicate if Smartcard mode is enabled + * @note Macro @ref IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR3 SCEN LL_USART_IsEnabledSmartcard + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledSmartcard(USART_TypeDef *USARTx) +{ + return (READ_BIT(USARTx->CR3, USART_CR3_SCEN) == (USART_CR3_SCEN)); +} + +/** + * @brief Set Smartcard prescaler value, used for dividing the USART clock + * source to provide the SMARTCARD Clock (5 bits value) + * @note Macro @ref IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll GTPR PSC LL_USART_SetSmartcardPrescaler + * @param USARTx USART Instance + * @param PrescalerValue Value between Min_Data=0 and Max_Data=31 + * @retval None + */ +__STATIC_INLINE void LL_USART_SetSmartcardPrescaler(USART_TypeDef *USARTx, uint32_t PrescalerValue) +{ + MODIFY_REG(USARTx->GTPR, USART_GTPR_PSC, PrescalerValue); +} + +/** + * @brief Return Smartcard prescaler value, used for dividing the USART clock + * source to provide the SMARTCARD Clock (5 bits value) + * @note Macro @ref IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll GTPR PSC LL_USART_GetSmartcardPrescaler + * @param USARTx USART Instance + * @retval Smartcard prescaler value (Value between Min_Data=0 and Max_Data=31) + */ +__STATIC_INLINE uint32_t LL_USART_GetSmartcardPrescaler(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->GTPR, USART_GTPR_PSC)); +} + +/** + * @brief Set Smartcard Guard time value, expressed in nb of baud clocks periods + * (GT[7:0] bits : Guard time value) + * @note Macro @ref IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll GTPR GT LL_USART_SetSmartcardGuardTime + * @param USARTx USART Instance + * @param GuardTime Value between Min_Data=0x00 and Max_Data=0xFF + * @retval None + */ +__STATIC_INLINE void LL_USART_SetSmartcardGuardTime(USART_TypeDef *USARTx, uint32_t GuardTime) +{ + MODIFY_REG(USARTx->GTPR, USART_GTPR_GT, GuardTime << USART_POSITION_GTPR_GT); +} + +/** + * @brief Return Smartcard Guard time value, expressed in nb of baud clocks periods + * (GT[7:0] bits : Guard time value) + * @note Macro @ref IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll GTPR GT LL_USART_GetSmartcardGuardTime + * @param USARTx USART Instance + * @retval Smartcard Guard time value (Value between Min_Data=0x00 and Max_Data=0xFF) + */ +__STATIC_INLINE uint32_t LL_USART_GetSmartcardGuardTime(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->GTPR, USART_GTPR_GT) >> USART_POSITION_GTPR_GT); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_Configuration_HalfDuplex Configuration functions related to Half Duplex feature + * @{ + */ + +/** + * @brief Enable Single Wire Half-Duplex mode + * @note Macro @ref IS_UART_HALFDUPLEX_INSTANCE(USARTx) can be used to check whether or not + * Half-Duplex mode is supported by the USARTx instance. + * @rmtoll CR3 HDSEL LL_USART_EnableHalfDuplex + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableHalfDuplex(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_HDSEL); +} + +/** + * @brief Disable Single Wire Half-Duplex mode + * @note Macro @ref IS_UART_HALFDUPLEX_INSTANCE(USARTx) can be used to check whether or not + * Half-Duplex mode is supported by the USARTx instance. + * @rmtoll CR3 HDSEL LL_USART_DisableHalfDuplex + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableHalfDuplex(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_HDSEL); +} + +/** + * @brief Indicate if Single Wire Half-Duplex mode is enabled + * @note Macro @ref IS_UART_HALFDUPLEX_INSTANCE(USARTx) can be used to check whether or not + * Half-Duplex mode is supported by the USARTx instance. + * @rmtoll CR3 HDSEL LL_USART_IsEnabledHalfDuplex + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledHalfDuplex(USART_TypeDef *USARTx) +{ + return (READ_BIT(USARTx->CR3, USART_CR3_HDSEL) == (USART_CR3_HDSEL)); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_Configuration_LIN Configuration functions related to LIN feature + * @{ + */ + +/** + * @brief Set LIN Break Detection Length + * @note Macro @ref IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll CR2 LBDL LL_USART_SetLINBrkDetectionLen + * @param USARTx USART Instance + * @param LINBDLength This parameter can be one of the following values: + * @arg @ref LL_USART_LINBREAK_DETECT_10B + * @arg @ref LL_USART_LINBREAK_DETECT_11B + * @retval None + */ +__STATIC_INLINE void LL_USART_SetLINBrkDetectionLen(USART_TypeDef *USARTx, uint32_t LINBDLength) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_LBDL, LINBDLength); +} + +/** + * @brief Return LIN Break Detection Length + * @note Macro @ref IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll CR2 LBDL LL_USART_GetLINBrkDetectionLen + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_LINBREAK_DETECT_10B + * @arg @ref LL_USART_LINBREAK_DETECT_11B + */ +__STATIC_INLINE uint32_t LL_USART_GetLINBrkDetectionLen(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_LBDL)); +} + +/** + * @brief Enable LIN mode + * @note Macro @ref IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll CR2 LINEN LL_USART_EnableLIN + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableLIN(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR2, USART_CR2_LINEN); +} + +/** + * @brief Disable LIN mode + * @note Macro @ref IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll CR2 LINEN LL_USART_DisableLIN + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableLIN(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR2, USART_CR2_LINEN); +} + +/** + * @brief Indicate if LIN mode is enabled + * @note Macro @ref IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll CR2 LINEN LL_USART_IsEnabledLIN + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledLIN(USART_TypeDef *USARTx) +{ + return (READ_BIT(USARTx->CR2, USART_CR2_LINEN) == (USART_CR2_LINEN)); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_AdvancedConfiguration Advanced Configurations services + * @{ + */ + +/** + * @brief Perform basic configuration of USART for enabling use in Asynchronous Mode (UART) + * @note In UART mode, the following bits must be kept cleared: + * - LINEN bit in the USART_CR2 register, + * - CLKEN bit in the USART_CR2 register, + * - SCEN bit in the USART_CR3 register, + * - IREN bit in the USART_CR3 register, + * - HDSEL bit in the USART_CR3 register. + * @note Call of this function is equivalent to following function call sequence : + * - Clear LINEN in CR2 using @ref LL_USART_DisableLIN() function + * - Clear CLKEN in CR2 using @ref LL_USART_DisableSCLKOutput() function + * - Clear SCEN in CR3 using @ref LL_USART_DisableSmartcard() function + * - Clear IREN in CR3 using @ref LL_USART_DisableIrda() function + * - Clear HDSEL in CR3 using @ref LL_USART_DisableHalfDuplex() function + * @note Other remaining configurations items related to Asynchronous Mode + * (as Baud Rate, Word length, Parity, ...) should be set using + * dedicated functions + * @rmtoll CR2 LINEN LL_USART_ConfigAsyncMode\n + * CR2 CLKEN LL_USART_ConfigAsyncMode\n + * CR3 SCEN LL_USART_ConfigAsyncMode\n + * CR3 IREN LL_USART_ConfigAsyncMode\n + * CR3 HDSEL LL_USART_ConfigAsyncMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigAsyncMode(USART_TypeDef *USARTx) +{ + /* In Asynchronous mode, the following bits must be kept cleared: + - LINEN, CLKEN bits in the USART_CR2 register, + - SCEN, IREN and HDSEL bits in the USART_CR3 register.*/ + CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); + CLEAR_BIT(USARTx->CR3, (USART_CR3_SCEN | USART_CR3_IREN | USART_CR3_HDSEL)); +} + +/** + * @brief Perform basic configuration of USART for enabling use in Synchronous Mode + * @note In Synchronous mode, the following bits must be kept cleared: + * - LINEN bit in the USART_CR2 register, + * - SCEN bit in the USART_CR3 register, + * - IREN bit in the USART_CR3 register, + * - HDSEL bit in the USART_CR3 register. + * This function also sets the USART in Synchronous mode. + * @note Macro @ref IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @note Call of this function is equivalent to following function call sequence : + * - Clear LINEN in CR2 using @ref LL_USART_DisableLIN() function + * - Clear IREN in CR3 using @ref LL_USART_DisableIrda() function + * - Clear SCEN in CR3 using @ref LL_USART_DisableSmartcard() function + * - Clear HDSEL in CR3 using @ref LL_USART_DisableHalfDuplex() function + * - Set CLKEN in CR2 using @ref LL_USART_EnableSCLKOutput() function + * @note Other remaining configurations items related to Synchronous Mode + * (as Baud Rate, Word length, Parity, Clock Polarity, ...) should be set using + * dedicated functions + * @rmtoll CR2 LINEN LL_USART_ConfigSyncMode\n + * CR2 CLKEN LL_USART_ConfigSyncMode\n + * CR3 SCEN LL_USART_ConfigSyncMode\n + * CR3 IREN LL_USART_ConfigSyncMode\n + * CR3 HDSEL LL_USART_ConfigSyncMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigSyncMode(USART_TypeDef *USARTx) +{ + /* In Synchronous mode, the following bits must be kept cleared: + - LINEN bit in the USART_CR2 register, + - SCEN, IREN and HDSEL bits in the USART_CR3 register.*/ + CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN)); + CLEAR_BIT(USARTx->CR3, (USART_CR3_SCEN | USART_CR3_IREN | USART_CR3_HDSEL)); + /* set the UART/USART in Synchronous mode */ + SET_BIT(USARTx->CR2, USART_CR2_CLKEN); +} + +/** + * @brief Perform basic configuration of USART for enabling use in LIN Mode + * @note In LIN mode, the following bits must be kept cleared: + * - STOP and CLKEN bits in the USART_CR2 register, + * - SCEN bit in the USART_CR3 register, + * - IREN bit in the USART_CR3 register, + * - HDSEL bit in the USART_CR3 register. + * This function also set the UART/USART in LIN mode. + * @note Macro @ref IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @note Call of this function is equivalent to following function call sequence : + * - Clear CLKEN in CR2 using @ref LL_USART_DisableSCLKOutput() function + * - Clear STOP in CR2 using @ref LL_USART_SetStopBitsLength() function + * - Clear SCEN in CR3 using @ref LL_USART_DisableSmartcard() function + * - Clear IREN in CR3 using @ref LL_USART_DisableIrda() function + * - Clear HDSEL in CR3 using @ref LL_USART_DisableHalfDuplex() function + * - Set LINEN in CR2 using @ref LL_USART_EnableLIN() function + * @note Other remaining configurations items related to LIN Mode + * (as Baud Rate, Word length, LIN Break Detection Length, ...) should be set using + * dedicated functions + * @rmtoll CR2 CLKEN LL_USART_ConfigLINMode\n + * CR2 STOP LL_USART_ConfigLINMode\n + * CR2 LINEN LL_USART_ConfigLINMode\n + * CR3 IREN LL_USART_ConfigLINMode\n + * CR3 SCEN LL_USART_ConfigLINMode\n + * CR3 HDSEL LL_USART_ConfigLINMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigLINMode(USART_TypeDef *USARTx) +{ + /* In LIN mode, the following bits must be kept cleared: + - STOP and CLKEN bits in the USART_CR2 register, + - IREN, SCEN and HDSEL bits in the USART_CR3 register.*/ + CLEAR_BIT(USARTx->CR2, (USART_CR2_CLKEN | USART_CR2_STOP)); + CLEAR_BIT(USARTx->CR3, (USART_CR3_IREN | USART_CR3_SCEN | USART_CR3_HDSEL)); + /* Set the UART/USART in LIN mode */ + SET_BIT(USARTx->CR2, USART_CR2_LINEN); +} + +/** + * @brief Perform basic configuration of USART for enabling use in Half Duplex Mode + * @note In Half Duplex mode, the following bits must be kept cleared: + * - LINEN bit in the USART_CR2 register, + * - CLKEN bit in the USART_CR2 register, + * - SCEN bit in the USART_CR3 register, + * - IREN bit in the USART_CR3 register, + * This function also sets the UART/USART in Half Duplex mode. + * @note Macro @ref IS_UART_HALFDUPLEX_INSTANCE(USARTx) can be used to check whether or not + * Half-Duplex mode is supported by the USARTx instance. + * @note Call of this function is equivalent to following function call sequence : + * - Clear LINEN in CR2 using @ref LL_USART_DisableLIN() function + * - Clear CLKEN in CR2 using @ref LL_USART_DisableSCLKOutput() function + * - Clear SCEN in CR3 using @ref LL_USART_DisableSmartcard() function + * - Clear IREN in CR3 using @ref LL_USART_DisableIrda() function + * - Set HDSEL in CR3 using @ref LL_USART_EnableHalfDuplex() function + * @note Other remaining configurations items related to Half Duplex Mode + * (as Baud Rate, Word length, Parity, ...) should be set using + * dedicated functions + * @rmtoll CR2 LINEN LL_USART_ConfigHalfDuplexMode\n + * CR2 CLKEN LL_USART_ConfigHalfDuplexMode\n + * CR3 HDSEL LL_USART_ConfigHalfDuplexMode\n + * CR3 SCEN LL_USART_ConfigHalfDuplexMode\n + * CR3 IREN LL_USART_ConfigHalfDuplexMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigHalfDuplexMode(USART_TypeDef *USARTx) +{ + /* In Half Duplex mode, the following bits must be kept cleared: + - LINEN and CLKEN bits in the USART_CR2 register, + - SCEN and IREN bits in the USART_CR3 register.*/ + CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); + CLEAR_BIT(USARTx->CR3, (USART_CR3_SCEN | USART_CR3_IREN)); + /* set the UART/USART in Half Duplex mode */ + SET_BIT(USARTx->CR3, USART_CR3_HDSEL); +} + +/** + * @brief Perform basic configuration of USART for enabling use in Smartcard Mode + * @note In Smartcard mode, the following bits must be kept cleared: + * - LINEN bit in the USART_CR2 register, + * - IREN bit in the USART_CR3 register, + * - HDSEL bit in the USART_CR3 register. + * This function also configures Stop bits to 1.5 bits and + * sets the USART in Smartcard mode (SCEN bit). + * Clock Output is also enabled (CLKEN). + * @note Macro @ref IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @note Call of this function is equivalent to following function call sequence : + * - Clear LINEN in CR2 using @ref LL_USART_DisableLIN() function + * - Clear IREN in CR3 using @ref LL_USART_DisableIrda() function + * - Clear HDSEL in CR3 using @ref LL_USART_DisableHalfDuplex() function + * - Configure STOP in CR2 using @ref LL_USART_SetStopBitsLength() function + * - Set CLKEN in CR2 using @ref LL_USART_EnableSCLKOutput() function + * - Set SCEN in CR3 using @ref LL_USART_EnableSmartcard() function + * @note Other remaining configurations items related to Smartcard Mode + * (as Baud Rate, Word length, Parity, ...) should be set using + * dedicated functions + * @rmtoll CR2 LINEN LL_USART_ConfigSmartcardMode\n + * CR2 STOP LL_USART_ConfigSmartcardMode\n + * CR2 CLKEN LL_USART_ConfigSmartcardMode\n + * CR3 HDSEL LL_USART_ConfigSmartcardMode\n + * CR3 SCEN LL_USART_ConfigSmartcardMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigSmartcardMode(USART_TypeDef *USARTx) +{ + /* In Smartcard mode, the following bits must be kept cleared: + - LINEN bit in the USART_CR2 register, + - IREN and HDSEL bits in the USART_CR3 register.*/ + CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN)); + CLEAR_BIT(USARTx->CR3, (USART_CR3_IREN | USART_CR3_HDSEL)); + /* Configure Stop bits to 1.5 bits */ + /* Synchronous mode is activated by default */ + SET_BIT(USARTx->CR2, (USART_CR2_STOP_0 | USART_CR2_STOP_1 | USART_CR2_CLKEN)); + /* set the UART/USART in Smartcard mode */ + SET_BIT(USARTx->CR3, USART_CR3_SCEN); +} + +/** + * @brief Perform basic configuration of USART for enabling use in Irda Mode + * @note In IRDA mode, the following bits must be kept cleared: + * - LINEN bit in the USART_CR2 register, + * - STOP and CLKEN bits in the USART_CR2 register, + * - SCEN bit in the USART_CR3 register, + * - HDSEL bit in the USART_CR3 register. + * This function also sets the UART/USART in IRDA mode (IREN bit). + * @note Macro @ref IS_IRDA_INSTANCE(USARTx) can be used to check whether or not + * IrDA feature is supported by the USARTx instance. + * @note Call of this function is equivalent to following function call sequence : + * - Clear LINEN in CR2 using @ref LL_USART_DisableLIN() function + * - Clear CLKEN in CR2 using @ref LL_USART_DisableSCLKOutput() function + * - Clear SCEN in CR3 using @ref LL_USART_DisableSmartcard() function + * - Clear HDSEL in CR3 using @ref LL_USART_DisableHalfDuplex() function + * - Configure STOP in CR2 using @ref LL_USART_SetStopBitsLength() function + * - Set IREN in CR3 using @ref LL_USART_EnableIrda() function + * @note Other remaining configurations items related to Irda Mode + * (as Baud Rate, Word length, Power mode, ...) should be set using + * dedicated functions + * @rmtoll CR2 LINEN LL_USART_ConfigIrdaMode\n + * CR2 CLKEN LL_USART_ConfigIrdaMode\n + * CR2 STOP LL_USART_ConfigIrdaMode\n + * CR3 SCEN LL_USART_ConfigIrdaMode\n + * CR3 HDSEL LL_USART_ConfigIrdaMode\n + * CR3 IREN LL_USART_ConfigIrdaMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigIrdaMode(USART_TypeDef *USARTx) +{ + /* In IRDA mode, the following bits must be kept cleared: + - LINEN, STOP and CLKEN bits in the USART_CR2 register, + - SCEN and HDSEL bits in the USART_CR3 register.*/ + CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN | USART_CR2_STOP)); + CLEAR_BIT(USARTx->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL)); + /* set the UART/USART in IRDA mode */ + SET_BIT(USARTx->CR3, USART_CR3_IREN); +} + +/** + * @brief Perform basic configuration of USART for enabling use in Multi processor Mode + * (several USARTs connected in a network, one of the USARTs can be the master, + * its TX output connected to the RX inputs of the other slaves USARTs). + * @note In MultiProcessor mode, the following bits must be kept cleared: + * - LINEN bit in the USART_CR2 register, + * - CLKEN bit in the USART_CR2 register, + * - SCEN bit in the USART_CR3 register, + * - IREN bit in the USART_CR3 register, + * - HDSEL bit in the USART_CR3 register. + * @note Call of this function is equivalent to following function call sequence : + * - Clear LINEN in CR2 using @ref LL_USART_DisableLIN() function + * - Clear CLKEN in CR2 using @ref LL_USART_DisableSCLKOutput() function + * - Clear SCEN in CR3 using @ref LL_USART_DisableSmartcard() function + * - Clear IREN in CR3 using @ref LL_USART_DisableIrda() function + * - Clear HDSEL in CR3 using @ref LL_USART_DisableHalfDuplex() function + * @note Other remaining configurations items related to Multi processor Mode + * (as Baud Rate, Wake Up Method, Node address, ...) should be set using + * dedicated functions + * @rmtoll CR2 LINEN LL_USART_ConfigMultiProcessMode\n + * CR2 CLKEN LL_USART_ConfigMultiProcessMode\n + * CR3 SCEN LL_USART_ConfigMultiProcessMode\n + * CR3 HDSEL LL_USART_ConfigMultiProcessMode\n + * CR3 IREN LL_USART_ConfigMultiProcessMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigMultiProcessMode(USART_TypeDef *USARTx) +{ + /* In Multi Processor mode, the following bits must be kept cleared: + - LINEN and CLKEN bits in the USART_CR2 register, + - IREN, SCEN and HDSEL bits in the USART_CR3 register.*/ + CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); + CLEAR_BIT(USARTx->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL | USART_CR3_IREN)); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_FLAG_Management FLAG_Management + * @{ + */ + +/** + * @brief Check if the USART Parity Error Flag is set or not + * @rmtoll SR PE LL_USART_IsActiveFlag_PE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_PE(USART_TypeDef *USARTx) +{ + return (READ_BIT(USARTx->SR, USART_SR_PE) == (USART_SR_PE)); +} + +/** + * @brief Check if the USART Framing Error Flag is set or not + * @rmtoll SR FE LL_USART_IsActiveFlag_FE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_FE(USART_TypeDef *USARTx) +{ + return (READ_BIT(USARTx->SR, USART_SR_FE) == (USART_SR_FE)); +} + +/** + * @brief Check if the USART Noise error detected Flag is set or not + * @rmtoll SR NF LL_USART_IsActiveFlag_NE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_NE(USART_TypeDef *USARTx) +{ + return (READ_BIT(USARTx->SR, USART_SR_NE) == (USART_SR_NE)); +} + +/** + * @brief Check if the USART OverRun Error Flag is set or not + * @rmtoll SR ORE LL_USART_IsActiveFlag_ORE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_ORE(USART_TypeDef *USARTx) +{ + return (READ_BIT(USARTx->SR, USART_SR_ORE) == (USART_SR_ORE)); +} + +/** + * @brief Check if the USART IDLE line detected Flag is set or not + * @rmtoll SR IDLE LL_USART_IsActiveFlag_IDLE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_IDLE(USART_TypeDef *USARTx) +{ + return (READ_BIT(USARTx->SR, USART_SR_IDLE) == (USART_SR_IDLE)); +} + +/** + * @brief Check if the USART Read Data Register Not Empty Flag is set or not + * @rmtoll SR RXNE LL_USART_IsActiveFlag_RXNE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_RXNE(USART_TypeDef *USARTx) +{ + return (READ_BIT(USARTx->SR, USART_SR_RXNE) == (USART_SR_RXNE)); +} + +/** + * @brief Check if the USART Transmission Complete Flag is set or not + * @rmtoll SR TC LL_USART_IsActiveFlag_TC + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_TC(USART_TypeDef *USARTx) +{ + return (READ_BIT(USARTx->SR, USART_SR_TC) == (USART_SR_TC)); +} + +/** + * @brief Check if the USART Transmit Data Register Empty Flag is set or not + * @rmtoll SR TXE LL_USART_IsActiveFlag_TXE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_TXE(USART_TypeDef *USARTx) +{ + return (READ_BIT(USARTx->SR, USART_SR_TXE) == (USART_SR_TXE)); +} + +/** + * @brief Check if the USART LIN Break Detection Flag is set or not + * @note Macro @ref IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll SR LBD LL_USART_IsActiveFlag_LBD + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_LBD(USART_TypeDef *USARTx) +{ + return (READ_BIT(USARTx->SR, USART_SR_LBD) == (USART_SR_LBD)); +} + +/** + * @brief Check if the USART CTS Flag is set or not + * @note Macro @ref IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll SR CTS LL_USART_IsActiveFlag_nCTS + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_nCTS(USART_TypeDef *USARTx) +{ + return (READ_BIT(USARTx->SR, USART_SR_CTS) == (USART_SR_CTS)); +} + +/** + * @brief Check if the USART Send Break Flag is set or not + * @rmtoll CR1 SBK LL_USART_IsActiveFlag_SBK + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_SBK(USART_TypeDef *USARTx) +{ + return (READ_BIT(USARTx->CR1, USART_CR1_SBK) == (USART_CR1_SBK)); +} + +/** + * @brief Check if the USART Receive Wake Up from mute mode Flag is set or not + * @rmtoll CR1 RWU LL_USART_IsActiveFlag_RWU + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_RWU(USART_TypeDef *USARTx) +{ + return (READ_BIT(USARTx->CR1, USART_CR1_RWU) == (USART_CR1_RWU)); +} + +/** + * @brief Clear Parity Error Flag + * @note Clearing this flag is done by a read access to the USARTx_SR + * register followed by a read access to the USARTx_DR register. + * @note Please also consider that when clearing this flag, other flags as + * NE, FE, ORE, IDLE would also be cleared. + * @rmtoll SR PE LL_USART_ClearFlag_PE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_PE(USART_TypeDef *USARTx) +{ + __IO uint32_t tmpreg; + tmpreg = USARTx->SR; + (void) tmpreg; + tmpreg = USARTx->DR; + (void) tmpreg; +} + +/** + * @brief Clear Framing Error Flag + * @note Clearing this flag is done by a read access to the USARTx_SR + * register followed by a read access to the USARTx_DR register. + * @note Please also consider that when clearing this flag, other flags as + * PE, NE, ORE, IDLE would also be cleared. + * @rmtoll SR FE LL_USART_ClearFlag_FE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_FE(USART_TypeDef *USARTx) +{ + __IO uint32_t tmpreg; + tmpreg = USARTx->SR; + (void) tmpreg; + tmpreg = USARTx->DR; + (void) tmpreg; +} + +/** + * @brief Clear Noise detected Flag + * @note Clearing this flag is done by a read access to the USARTx_SR + * register followed by a read access to the USARTx_DR register. + * @note Please also consider that when clearing this flag, other flags as + * PE, FE, ORE, IDLE would also be cleared. + * @rmtoll SR NF LL_USART_ClearFlag_NE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_NE(USART_TypeDef *USARTx) +{ + __IO uint32_t tmpreg; + tmpreg = USARTx->SR; + (void) tmpreg; + tmpreg = USARTx->DR; + (void) tmpreg; +} + +/** + * @brief Clear OverRun Error Flag + * @note Clearing this flag is done by a read access to the USARTx_SR + * register followed by a read access to the USARTx_DR register. + * @note Please also consider that when clearing this flag, other flags as + * PE, NE, FE, IDLE would also be cleared. + * @rmtoll SR ORE LL_USART_ClearFlag_ORE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_ORE(USART_TypeDef *USARTx) +{ + __IO uint32_t tmpreg; + tmpreg = USARTx->SR; + (void) tmpreg; + tmpreg = USARTx->DR; + (void) tmpreg; +} + +/** + * @brief Clear IDLE line detected Flag + * @note Clearing this flag is done by a read access to the USARTx_SR + * register followed by a read access to the USARTx_DR register. + * @note Please also consider that when clearing this flag, other flags as + * PE, NE, FE, ORE would also be cleared. + * @rmtoll SR IDLE LL_USART_ClearFlag_IDLE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_IDLE(USART_TypeDef *USARTx) +{ + __IO uint32_t tmpreg; + tmpreg = USARTx->SR; + (void) tmpreg; + tmpreg = USARTx->DR; + (void) tmpreg; +} + +/** + * @brief Clear Transmission Complete Flag + * @rmtoll SR TC LL_USART_ClearFlag_TC + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_TC(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->SR , ~(USART_SR_TC)); +} + +/** + * @brief Clear RX Not Empty Flag + * @rmtoll SR RXNE LL_USART_ClearFlag_RXNE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_RXNE(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->SR , ~(USART_SR_RXNE)); +} + +/** + * @brief Clear LIN Break Detection Flag + * @note Macro @ref IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll SR LBD LL_USART_ClearFlag_LBD + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_LBD(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->SR , ~(USART_SR_LBD)); +} + +/** + * @brief Clear CTS Interrupt Flag + * @note Macro @ref IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll SR CTS LL_USART_ClearFlag_nCTS + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_nCTS(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->SR , ~(USART_SR_CTS)); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_IT_Management IT_Management + * @{ + */ + +/** + * @brief Enable IDLE Interrupt + * @rmtoll CR1 IDLEIE LL_USART_EnableIT_IDLE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_IDLE(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR1, USART_CR1_IDLEIE); +} + +/** + * @brief Enable RX Not Empty Interrupt + * @rmtoll CR1 RXNEIE LL_USART_EnableIT_RXNE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_RXNE(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR1, USART_CR1_RXNEIE); +} + +/** + * @brief Enable Transmission Complete Interrupt + * @rmtoll CR1 TCIE LL_USART_EnableIT_TC + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_TC(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR1, USART_CR1_TCIE); +} + +/** + * @brief Enable TX Empty Interrupt + * @rmtoll CR1 TXEIE LL_USART_EnableIT_TXE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_TXE(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR1, USART_CR1_TXEIE); +} + +/** + * @brief Enable Parity Error Interrupt + * @rmtoll CR1 PEIE LL_USART_EnableIT_PE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_PE(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR1, USART_CR1_PEIE); +} + +/** + * @brief Enable LIN Break Detection Interrupt + * @note Macro @ref IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll CR2 LBDIE LL_USART_EnableIT_LBD + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_LBD(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR2, USART_CR2_LBDIE); +} + +/** + * @brief Enable Error Interrupt + * @note When set, Error Interrupt Enable Bit is enabling interrupt generation in case of a framing + * error, overrun error or noise flag (FE=1 or ORE=1 or NF=1 in the USARTx_SR register). + * 0: Interrupt is inhibited + * 1: An interrupt is generated when FE=1 or ORE=1 or NF=1 in the USARTx_SR register. + * @rmtoll CR3 EIE LL_USART_EnableIT_ERROR + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_ERROR(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_EIE); +} + +/** + * @brief Enable CTS Interrupt + * @note Macro @ref IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 CTSIE LL_USART_EnableIT_CTS + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_CTS(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_CTSIE); +} + +/** + * @brief Disable IDLE Interrupt + * @rmtoll CR1 IDLEIE LL_USART_DisableIT_IDLE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_IDLE(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR1, USART_CR1_IDLEIE); +} + +/** + * @brief Disable RX Not Empty Interrupt + * @rmtoll CR1 RXNEIE LL_USART_DisableIT_RXNE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_RXNE(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR1, USART_CR1_RXNEIE); +} + +/** + * @brief Disable Transmission Complete Interrupt + * @rmtoll CR1 TCIE LL_USART_DisableIT_TC + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_TC(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR1, USART_CR1_TCIE); +} + +/** + * @brief Disable TX Empty Interrupt + * @rmtoll CR1 TXEIE LL_USART_DisableIT_TXE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_TXE(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR1, USART_CR1_TXEIE); +} + +/** + * @brief Disable Parity Error Interrupt + * @rmtoll CR1 PEIE LL_USART_DisableIT_PE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_PE(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR1, USART_CR1_PEIE); +} + +/** + * @brief Disable LIN Break Detection Interrupt + * @note Macro @ref IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll CR2 LBDIE LL_USART_DisableIT_LBD + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_LBD(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR2, USART_CR2_LBDIE); +} + +/** + * @brief Disable Error Interrupt + * @note When set, Error Interrupt Enable Bit is enabling interrupt generation in case of a framing + * error, overrun error or noise flag (FE=1 or ORE=1 or NF=1 in the USARTx_SR register). + * 0: Interrupt is inhibited + * 1: An interrupt is generated when FE=1 or ORE=1 or NF=1 in the USARTx_SR register. + * @rmtoll CR3 EIE LL_USART_DisableIT_ERROR + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_ERROR(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_EIE); +} + +/** + * @brief Disable CTS Interrupt + * @note Macro @ref IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 CTSIE LL_USART_DisableIT_CTS + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_CTS(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_CTSIE); +} + +/** + * @brief Check if the USART IDLE Interrupt source is enabled or disabled. + * @rmtoll CR1 IDLEIE LL_USART_IsEnabledIT_IDLE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_IDLE(USART_TypeDef *USARTx) +{ + return (READ_BIT(USARTx->CR1, USART_CR1_IDLEIE) == (USART_CR1_IDLEIE)); +} + +/** + * @brief Check if the USART RX Not Empty Interrupt is enabled or disabled. + * @rmtoll CR1 RXNEIE LL_USART_IsEnabledIT_RXNE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_RXNE(USART_TypeDef *USARTx) +{ + return (READ_BIT(USARTx->CR1, USART_CR1_RXNEIE) == (USART_CR1_RXNEIE)); +} + +/** + * @brief Check if the USART Transmission Complete Interrupt is enabled or disabled. + * @rmtoll CR1 TCIE LL_USART_IsEnabledIT_TC + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_TC(USART_TypeDef *USARTx) +{ + return (READ_BIT(USARTx->CR1, USART_CR1_TCIE) == (USART_CR1_TCIE)); +} + +/** + * @brief Check if the USART TX Empty Interrupt is enabled or disabled. + * @rmtoll CR1 TXEIE LL_USART_IsEnabledIT_TXE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_TXE(USART_TypeDef *USARTx) +{ + return (READ_BIT(USARTx->CR1, USART_CR1_TXEIE) == (USART_CR1_TXEIE)); +} + +/** + * @brief Check if the USART Parity Error Interrupt is enabled or disabled. + * @rmtoll CR1 PEIE LL_USART_IsEnabledIT_PE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_PE(USART_TypeDef *USARTx) +{ + return (READ_BIT(USARTx->CR1, USART_CR1_PEIE) == (USART_CR1_PEIE)); +} + +/** + * @brief Check if the USART LIN Break Detection Interrupt is enabled or disabled. + * @note Macro @ref IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll CR2 LBDIE LL_USART_IsEnabledIT_LBD + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_LBD(USART_TypeDef *USARTx) +{ + return (READ_BIT(USARTx->CR2, USART_CR2_LBDIE) == (USART_CR2_LBDIE)); +} + +/** + * @brief Check if the USART Error Interrupt is enabled or disabled. + * @rmtoll CR3 EIE LL_USART_IsEnabledIT_ERROR + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_ERROR(USART_TypeDef *USARTx) +{ + return (READ_BIT(USARTx->CR3, USART_CR3_EIE) == (USART_CR3_EIE)); +} + +/** + * @brief Check if the USART CTS Interrupt is enabled or disabled. + * @note Macro @ref IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 CTSIE LL_USART_IsEnabledIT_CTS + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_CTS(USART_TypeDef *USARTx) +{ + return (READ_BIT(USARTx->CR3, USART_CR3_CTSIE) == (USART_CR3_CTSIE)); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_DMA_Management DMA_Management + * @{ + */ + +/** + * @brief Enable DMA Mode for reception + * @rmtoll CR3 DMAR LL_USART_EnableDMAReq_RX + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableDMAReq_RX(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_DMAR); +} + +/** + * @brief Disable DMA Mode for reception + * @rmtoll CR3 DMAR LL_USART_DisableDMAReq_RX + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableDMAReq_RX(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_DMAR); +} + +/** + * @brief Check if DMA Mode is enabled for reception + * @rmtoll CR3 DMAR LL_USART_IsEnabledDMAReq_RX + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledDMAReq_RX(USART_TypeDef *USARTx) +{ + return (READ_BIT(USARTx->CR3, USART_CR3_DMAR) == (USART_CR3_DMAR)); +} + +/** + * @brief Enable DMA Mode for transmission + * @rmtoll CR3 DMAT LL_USART_EnableDMAReq_TX + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableDMAReq_TX(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_DMAT); +} + +/** + * @brief Disable DMA Mode for transmission + * @rmtoll CR3 DMAT LL_USART_DisableDMAReq_TX + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableDMAReq_TX(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_DMAT); +} + +/** + * @brief Check if DMA Mode is enabled for transmission + * @rmtoll CR3 DMAT LL_USART_IsEnabledDMAReq_TX + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledDMAReq_TX(USART_TypeDef *USARTx) +{ + return (READ_BIT(USARTx->CR3, USART_CR3_DMAT) == (USART_CR3_DMAT)); +} + +/** + * @brief Get the data register address used for DMA transfer + * @rmtoll DR DR LL_USART_DMA_GetRegAddr + * @note Address of Data Register is valid for both Transmit and Receive transfers. + * @param USARTx USART Instance + * @retval Address of data register + */ +__STATIC_INLINE uint32_t LL_USART_DMA_GetRegAddr(USART_TypeDef *USARTx) +{ + /* return address of DR register */ + return ((uint32_t) &(USARTx->DR)); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_Data_Management Data_Management + * @{ + */ + +/** + * @brief Read Receiver Data register (Receive Data value, 8 bits) + * @rmtoll DR DR LL_USART_ReceiveData8 + * @param USARTx USART Instance + * @retval Value between Min_Data=0x00 and Max_Data=0xFF + */ +__STATIC_INLINE uint8_t LL_USART_ReceiveData8(USART_TypeDef *USARTx) +{ + return (uint8_t)(READ_BIT(USARTx->DR, USART_DR_DR)); +} + +/** + * @brief Read Receiver Data register (Receive Data value, 9 bits) + * @rmtoll DR DR LL_USART_ReceiveData9 + * @param USARTx USART Instance + * @retval Value between Min_Data=0x00 and Max_Data=0x1FF + */ +__STATIC_INLINE uint16_t LL_USART_ReceiveData9(USART_TypeDef *USARTx) +{ + return (uint16_t)(READ_BIT(USARTx->DR, USART_DR_DR)); +} + +/** + * @brief Write in Transmitter Data Register (Transmit Data value, 8 bits) + * @rmtoll DR DR LL_USART_TransmitData8 + * @param USARTx USART Instance + * @param Value between Min_Data=0x00 and Max_Data=0xFF + * @retval None + */ +__STATIC_INLINE void LL_USART_TransmitData8(USART_TypeDef *USARTx, uint8_t Value) +{ + USARTx->DR = Value; +} + +/** + * @brief Write in Transmitter Data Register (Transmit Data value, 9 bits) + * @rmtoll DR DR LL_USART_TransmitData9 + * @param USARTx USART Instance + * @param Value between Min_Data=0x00 and Max_Data=0x1FF + * @retval None + */ +__STATIC_INLINE void LL_USART_TransmitData9(USART_TypeDef *USARTx, uint16_t Value) +{ + USARTx->DR = Value & 0x1FFU; +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_Execution Execution + * @{ + */ + +/** + * @brief Request Break sending + * @rmtoll CR1 SBK LL_USART_RequestBreakSending + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_RequestBreakSending(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR1, USART_CR1_SBK); +} + +/** + * @brief Put USART in Mute mode + * @rmtoll CR1 RWU LL_USART_RequestEnterMuteMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_RequestEnterMuteMode(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR1, USART_CR1_RWU); +} + +/** + * @brief Put USART in Active mode + * @rmtoll CR1 RWU LL_USART_RequestExitMuteMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_RequestExitMuteMode(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR1, USART_CR1_RWU); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup USART_LL_EF_Init Initialization and de-initialization functions + * @{ + */ +ErrorStatus LL_USART_DeInit(USART_TypeDef *USARTx); +ErrorStatus LL_USART_Init(USART_TypeDef *USARTx, LL_USART_InitTypeDef *USART_InitStruct); +void LL_USART_StructInit(LL_USART_InitTypeDef *USART_InitStruct); +ErrorStatus LL_USART_ClockInit(USART_TypeDef *USARTx, LL_USART_ClockInitTypeDef *USART_ClockInitStruct); +void LL_USART_ClockStructInit(LL_USART_ClockInitTypeDef *USART_ClockInitStruct); +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* USART1 || USART2|| USART3 || UART4 || UART5 */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32L1xx_LL_USART_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_ll_utils.h b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_ll_utils.h new file mode 100755 index 0000000..d432ff3 --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_ll_utils.h @@ -0,0 +1,287 @@ +/** + ****************************************************************************** + * @file stm32l1xx_ll_utils.h + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief Header file of UTILS LL module. + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The LL UTILS driver contains a set of generic APIs that can be + used by user: + (+) Device electronic signature + (+) Timing functions + (+) PLL configuration functions + + @endverbatim + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L1xx_LL_UTILS_H +#define __STM32L1xx_LL_UTILS_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx.h" + +/** @addtogroup STM32L1xx_LL_Driver + * @{ + */ + +/** @defgroup UTILS_LL UTILS + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup UTILS_LL_Private_Constants UTILS Private Constants + * @{ + */ + +/* Max delay can be used in LL_mDelay */ +#define LL_MAX_DELAY (uint32_t)0xFFFFFFFFU + +/** + * @brief Unique device ID register base address + */ +#define UID_BASE_ADDRESS UID_BASE + +/** + * @brief Flash size data register base address + */ +#define FLASHSIZE_BASE_ADDRESS FLASHSIZE_BASE + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup UTILS_LL_Private_Macros UTILS Private Macros + * @{ + */ +/** + * @} + */ +/* Exported types ------------------------------------------------------------*/ +/** @defgroup UTILS_LL_ES_INIT UTILS Exported structures + * @{ + */ +/** + * @brief UTILS PLL structure definition + */ +typedef struct +{ + uint32_t PLLMul; /*!< Multiplication factor for PLL VCO input clock. + This parameter can be a value of @ref RCC_LL_EC_PLL_MUL + + This feature can be modified afterwards using unitary function + @ref LL_RCC_PLL_ConfigDomain_SYS(). */ + + uint32_t PLLDiv; /*!< Division factor for PLL VCO output clock. + This parameter can be a value of @ref RCC_LL_EC_PLL_DIV + + This feature can be modified afterwards using unitary function + @ref LL_RCC_PLL_ConfigDomain_SYS(). */ +} LL_UTILS_PLLInitTypeDef; + +/** + * @brief UTILS System, AHB and APB buses clock configuration structure definition + */ +typedef struct +{ + uint32_t AHBCLKDivider; /*!< The AHB clock (HCLK) divider. This clock is derived from the system clock (SYSCLK). + This parameter can be a value of @ref RCC_LL_EC_SYSCLK_DIV + + This feature can be modified afterwards using unitary function + @ref LL_RCC_SetAHBPrescaler(). */ + + uint32_t APB1CLKDivider; /*!< The APB1 clock (PCLK1) divider. This clock is derived from the AHB clock (HCLK). + This parameter can be a value of @ref RCC_LL_EC_APB1_DIV + + This feature can be modified afterwards using unitary function + @ref LL_RCC_SetAPB1Prescaler(). */ + + uint32_t APB2CLKDivider; /*!< The APB2 clock (PCLK2) divider. This clock is derived from the AHB clock (HCLK). + This parameter can be a value of @ref RCC_LL_EC_APB2_DIV + + This feature can be modified afterwards using unitary function + @ref LL_RCC_SetAPB2Prescaler(). */ + +} LL_UTILS_ClkInitTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup UTILS_LL_Exported_Constants UTILS Exported Constants + * @{ + */ + +/** @defgroup UTILS_EC_HSE_BYPASS HSE Bypass activation + * @{ + */ +#define LL_UTILS_HSEBYPASS_OFF (uint32_t)0x00000000U /*!< HSE Bypass is not enabled */ +#define LL_UTILS_HSEBYPASS_ON (uint32_t)0x00000001U /*!< HSE Bypass is enabled */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup UTILS_LL_Exported_Functions UTILS Exported Functions + * @{ + */ + +/** @defgroup UTILS_EF_DEVICE_ELECTRONIC_SIGNATURE DEVICE ELECTRONIC SIGNATURE + * @{ + */ + +/** + * @brief Get Word0 of the unique device identifier (UID based on 96 bits) + * @retval UID[31:0] + */ +__STATIC_INLINE uint32_t LL_GetUID_Word0(void) +{ + return (uint32_t)(READ_REG(*((uint32_t *)UID_BASE_ADDRESS))); +} + +/** + * @brief Get Word1 of the unique device identifier (UID based on 96 bits) + * @retval UID[63:32] + */ +__STATIC_INLINE uint32_t LL_GetUID_Word1(void) +{ + return (uint32_t)(READ_REG(*((uint32_t *)(UID_BASE_ADDRESS + 4U)))); +} + +/** + * @brief Get Word2 of the unique device identifier (UID based on 96 bits) + * @retval UID[95:64] + */ +__STATIC_INLINE uint32_t LL_GetUID_Word2(void) +{ + return (uint32_t)(READ_REG(*((uint32_t *)(UID_BASE_ADDRESS + 8U)))); +} + +/** + * @brief Get Flash memory size + * @note For DEV_ID = 0x416 or 0x427 or 0x429 or 0x437, this field value indicates the Flash memory + * size of the device in Kbytes.\n + * Example: 0x0080 = 128 Kbytes.\n + * For DEV_ID = 0x436, the field value can be '0' or '1', with '0' for 384 Kbytes and '1' for 256 Kbytes. + * @note For DEV_ID = 0x429, only LSB part of F_SIZE: F_SIZE[7:0] is valid. The MSB part + * F_SIZE[15:8] is reserved and must be ignored. + * @retval FLASH_SIZE[15:0]: Flash memory size + */ +__STATIC_INLINE uint32_t LL_GetFlashSize(void) +{ + return (uint16_t)(READ_REG(*((uint32_t *)FLASHSIZE_BASE_ADDRESS))); +} + +/** + * @} + */ + +/** @defgroup UTILS_LL_EF_DELAY DELAY + * @{ + */ + +/** + * @brief This function configures the Cortex-M SysTick source of the time base. + * @param HCLKFrequency HCLK frequency in Hz (can be calculated thanks to RCC helper macro) + * @note When a RTOS is used, it is recommended to avoid changing the SysTick + * configuration by calling this function, for a delay use rather osDelay RTOS service. + * @param Ticks Number of ticks + * @retval None + */ +__STATIC_INLINE void LL_InitTick(uint32_t HCLKFrequency, uint32_t Ticks) +{ + /* Configure the SysTick to have interrupt in 1ms time base */ + SysTick->LOAD = (uint32_t)((HCLKFrequency / Ticks) - 1UL); /* set reload register */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable the Systick Timer */ +} + +void LL_Init1msTick(uint32_t HCLKFrequency); +void LL_mDelay(uint32_t Delay); + +/** + * @} + */ + +/** @defgroup UTILS_EF_SYSTEM SYSTEM + * @{ + */ + +void LL_SetSystemCoreClock(uint32_t HCLKFrequency); +ErrorStatus LL_PLL_ConfigSystemClock_HSI(LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct, + LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct); +ErrorStatus LL_PLL_ConfigSystemClock_HSE(uint32_t HSEFrequency, uint32_t HSEBypass, + LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct, LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32L1xx_LL_UTILS_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_ll_wwdg.h b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_ll_wwdg.h new file mode 100755 index 0000000..4088a71 --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Inc/stm32l1xx_ll_wwdg.h @@ -0,0 +1,342 @@ +/** + ****************************************************************************** + * @file stm32l1xx_ll_wwdg.h + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief Header file of WWDG LL module. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L1xx_LL_WWDG_H +#define __STM32L1xx_LL_WWDG_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx.h" + +/** @addtogroup STM32L1xx_LL_Driver + * @{ + */ + +#if defined (WWDG) + +/** @defgroup WWDG_LL WWDG + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ + +/* Private macros ------------------------------------------------------------*/ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup WWDG_LL_Exported_Constants WWDG Exported Constants + * @{ + */ + + +/** @defgroup WWDG_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_WWDG_ReadReg and LL_WWDG_WriteReg functions + * @{ + */ +#define LL_WWDG_CFR_EWI WWDG_CFR_EWI +/** + * @} + */ + +/** @defgroup WWDG_LL_EC_PRESCALER PRESCALER +* @{ +*/ +#define LL_WWDG_PRESCALER_1 (uint32_t)0x00000000U /*!< WWDG counter clock = (PCLK1/4096)/1 */ +#define LL_WWDG_PRESCALER_2 WWDG_CFR_WDGTB_0 /*!< WWDG counter clock = (PCLK1/4096)/2 */ +#define LL_WWDG_PRESCALER_4 WWDG_CFR_WDGTB_1 /*!< WWDG counter clock = (PCLK1/4096)/4 */ +#define LL_WWDG_PRESCALER_8 (WWDG_CFR_WDGTB_0 | WWDG_CFR_WDGTB_1) /*!< WWDG counter clock = (PCLK1/4096)/8 */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup WWDG_LL_Exported_Macros WWDG Exported Macros + * @{ + */ +/** @defgroup WWDG_LL_EM_WRITE_READ Common Write and read registers macros + * @{ + */ +/** + * @brief Write a value in WWDG register + * @param __INSTANCE__ WWDG Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_WWDG_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in WWDG register + * @param __INSTANCE__ WWDG Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_WWDG_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup WWDG_LL_Exported_Functions WWDG Exported Functions + * @{ + */ + +/** @defgroup WWDG_LL_EF_Configuration Configuration + * @{ + */ +/** + * @brief Enable Window Watchdog. The watchdog is always disabled after a reset. + * @note It is enabled by setting the WDGA bit in the WWDG_CR register, + * then it cannot be disabled again except by a reset. + * This bit is set by software and only cleared by hardware after a reset. + * When WDGA = 1, the watchdog can generate a reset. + * @rmtoll CR WDGA LL_WWDG_Enable + * @param WWDGx WWDG Instance + * @retval None + */ +__STATIC_INLINE void LL_WWDG_Enable(WWDG_TypeDef *WWDGx) +{ + SET_BIT(WWDGx->CR, WWDG_CR_WDGA); +} + +/** + * @brief Checks if Window Watchdog is enabled + * @rmtoll CR WDGA LL_WWDG_IsEnabled + * @param WWDGx WWDG Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_WWDG_IsEnabled(WWDG_TypeDef *WWDGx) +{ + return (READ_BIT(WWDGx->CR, WWDG_CR_WDGA) == (WWDG_CR_WDGA)); +} + +/** + * @brief Set the Watchdog counter value to provided value (7-bits T[6:0]) + * @note When writing to the WWDG_CR register, always write 1 in the MSB b6 to avoid generating an immediate reset + * This counter is decremented every (4096 x 2expWDGTB) PCLK cycles + * A reset is produced when it rolls over from 0x40 to 0x3F (bit T6 becomes cleared) + * Setting the counter lower then 0x40 causes an immediate reset (if WWDG enabled) + * @rmtoll CR T LL_WWDG_SetCounter + * @param WWDGx WWDG Instance + * @param Counter 0..0x7F (7 bit counter value) + * @retval None + */ +__STATIC_INLINE void LL_WWDG_SetCounter(WWDG_TypeDef *WWDGx, uint32_t Counter) +{ + MODIFY_REG(WWDGx->CR, WWDG_CR_T, Counter); +} + +/** + * @brief Return current Watchdog Counter Value (7 bits counter value) + * @rmtoll CR T LL_WWDG_GetCounter + * @param WWDGx WWDG Instance + * @retval 7 bit Watchdog Counter value + */ +__STATIC_INLINE uint32_t LL_WWDG_GetCounter(WWDG_TypeDef *WWDGx) +{ + return (uint32_t)(READ_BIT(WWDGx->CR, WWDG_CR_T)); +} + +/** + * @brief Set the time base of the prescaler (WDGTB). + * @note Prescaler is used to apply ratio on PCLK clock, so that Watchdog counter + * is decremented every (4096 x 2expWDGTB) PCLK cycles + * @rmtoll CFR WDGTB LL_WWDG_SetPrescaler + * @param WWDGx WWDG Instance + * @param Prescaler This parameter can be one of the following values: + * @arg @ref LL_WWDG_PRESCALER_1 + * @arg @ref LL_WWDG_PRESCALER_2 + * @arg @ref LL_WWDG_PRESCALER_4 + * @arg @ref LL_WWDG_PRESCALER_8 + * @retval None + */ +__STATIC_INLINE void LL_WWDG_SetPrescaler(WWDG_TypeDef *WWDGx, uint32_t Prescaler) +{ + MODIFY_REG(WWDGx->CFR, WWDG_CFR_WDGTB, Prescaler); +} + +/** + * @brief Return current Watchdog Prescaler Value + * @rmtoll CFR WDGTB LL_WWDG_GetPrescaler + * @param WWDGx WWDG Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_WWDG_PRESCALER_1 + * @arg @ref LL_WWDG_PRESCALER_2 + * @arg @ref LL_WWDG_PRESCALER_4 + * @arg @ref LL_WWDG_PRESCALER_8 + */ +__STATIC_INLINE uint32_t LL_WWDG_GetPrescaler(WWDG_TypeDef *WWDGx) +{ + return (uint32_t)(READ_BIT(WWDGx->CFR, WWDG_CFR_WDGTB)); +} + +/** + * @brief Set the Watchdog Window value to be compared to the downcounter (7-bits W[6:0]). + * @note This window value defines when write in the WWDG_CR register + * to program Watchdog counter is allowed. + * Watchdog counter value update must occur only when the counter value + * is lower than the Watchdog window register value. + * Otherwise, a MCU reset is generated if the 7-bit Watchdog counter value + * (in the control register) is refreshed before the downcounter has reached + * the watchdog window register value. + * Physically is possible to set the Window lower then 0x40 but it is not recommended. + * To generate an immediate reset, it is possible to set the Counter lower than 0x40. + * @rmtoll CFR W LL_WWDG_SetWindow + * @param WWDGx WWDG Instance + * @param Window 0x00..0x7F (7 bit Window value) + * @retval None + */ +__STATIC_INLINE void LL_WWDG_SetWindow(WWDG_TypeDef *WWDGx, uint32_t Window) +{ + MODIFY_REG(WWDGx->CFR, WWDG_CFR_W, Window); +} + +/** + * @brief Return current Watchdog Window Value (7 bits value) + * @rmtoll CFR W LL_WWDG_GetWindow + * @param WWDGx WWDG Instance + * @retval 7 bit Watchdog Window value + */ +__STATIC_INLINE uint32_t LL_WWDG_GetWindow(WWDG_TypeDef *WWDGx) +{ + return (uint32_t)(READ_BIT(WWDGx->CFR, WWDG_CFR_W)); +} + +/** + * @} + */ + +/** @defgroup WWDG_LL_EF_FLAG_Management FLAG_Management + * @{ + */ +/** + * @brief Indicates if the WWDG Early Wakeup Interrupt Flag is set or not. + * @note This bit is set by hardware when the counter has reached the value 0x40. + * It must be cleared by software by writing 0. + * A write of 1 has no effect. This bit is also set if the interrupt is not enabled. + * @rmtoll SR EWIF LL_WWDG_IsActiveFlag_EWKUP + * @param WWDGx WWDG Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_WWDG_IsActiveFlag_EWKUP(WWDG_TypeDef *WWDGx) +{ + return (READ_BIT(WWDGx->SR, WWDG_SR_EWIF) == (WWDG_SR_EWIF)); +} + +/** + * @brief Clear WWDG Early Wakeup Interrupt Flag (EWIF) + * @rmtoll SR EWIF LL_WWDG_ClearFlag_EWKUP + * @param WWDGx WWDG Instance + * @retval None + */ +__STATIC_INLINE void LL_WWDG_ClearFlag_EWKUP(WWDG_TypeDef *WWDGx) +{ + WRITE_REG(WWDGx->SR, ~WWDG_SR_EWIF); +} + +/** + * @} + */ + +/** @defgroup WWDG_LL_EF_IT_Management IT_Management + * @{ + */ +/** + * @brief Enable the Early Wakeup Interrupt. + * @note When set, an interrupt occurs whenever the counter reaches value 0x40. + * This interrupt is only cleared by hardware after a reset + * @rmtoll CFR EWI LL_WWDG_EnableIT_EWKUP + * @param WWDGx WWDG Instance + * @retval None + */ +__STATIC_INLINE void LL_WWDG_EnableIT_EWKUP(WWDG_TypeDef *WWDGx) +{ + SET_BIT(WWDGx->CFR, WWDG_CFR_EWI); +} + +/** + * @brief Check if Early Wakeup Interrupt is enabled + * @rmtoll CFR EWI LL_WWDG_IsEnabledIT_EWKUP + * @param WWDGx WWDG Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_WWDG_IsEnabledIT_EWKUP(WWDG_TypeDef *WWDGx) +{ + return (READ_BIT(WWDGx->CFR, WWDG_CFR_EWI) == (WWDG_CFR_EWI)); +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* WWDG */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32L1xx_LL_WWDG_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal.c b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal.c new file mode 100755 index 0000000..3dbd50e --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal.c @@ -0,0 +1,454 @@ +/** + ****************************************************************************** + * @file stm32l1xx_hal.c + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief HAL module driver. + * This is the common part of the HAL initialization + * + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The common HAL driver contains a set of generic and common APIs that can be + used by the PPP peripheral drivers and the user to start using the HAL. + [..] + The HAL contains two APIs' categories: + (+) Common HAL APIs + (+) Services HAL APIs + + @endverbatim + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_hal.h" + +/** @addtogroup STM32L1xx_HAL_Driver + * @{ + */ + +/** @defgroup HAL HAL + * @brief HAL module driver. + * @{ + */ + +#ifdef HAL_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ + +/** @defgroup HAL_Private_Defines HAL Private Defines + * @{ + */ + +/** + * @brief STM32L1xx HAL Driver version number + */ +#define __STM32L1xx_HAL_VERSION_MAIN (0x01) /*!< [31:24] main version */ +#define __STM32L1xx_HAL_VERSION_SUB1 (0x02) /*!< [23:16] sub1 version */ +#define __STM32L1xx_HAL_VERSION_SUB2 (0x00) /*!< [15:8] sub2 version */ +#define __STM32L1xx_HAL_VERSION_RC (0x00) /*!< [7:0] release candidate */ +#define __STM32L1xx_HAL_VERSION ((__STM32L1xx_HAL_VERSION_MAIN << 24)\ + |(__STM32L1xx_HAL_VERSION_SUB1 << 16)\ + |(__STM32L1xx_HAL_VERSION_SUB2 << 8 )\ + |(__STM32L1xx_HAL_VERSION_RC)) + +#define IDCODE_DEVID_MASK ((uint32_t)0x00000FFF) + +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ + +/** @defgroup HAL_Private_Variables HAL Private Variables + * @{ + */ + +__IO uint32_t uwTick; + +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup HAL_Exported_Functions HAL Exported Functions + * @{ + */ + +/** @defgroup HAL_Exported_Functions_Group1 Initialization and de-initialization Functions + * @brief Initialization and de-initialization functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Initializes the Flash interface, the NVIC allocation and initial clock + configuration. It initializes the source of time base also when timeout + is needed and the backup domain when enabled. + (+) de-Initializes common part of the HAL. + (+) Configure The time base source to have 1ms time base with a dedicated + Tick interrupt priority. + (++) Systick timer is used by default as source of time base, but user + can eventually implement his proper time base source (a general purpose + timer for example or other time source), keeping in mind that Time base + duration should be kept 1ms since PPP_TIMEOUT_VALUEs are defined and + handled in milliseconds basis. + (++) Time base configuration function (HAL_InitTick ()) is called automatically + at the beginning of the program after reset by HAL_Init() or at any time + when clock is configured, by HAL_RCC_ClockConfig(). + (++) Source of time base is configured to generate interrupts at regular + time intervals. Care must be taken if HAL_Delay() is called from a + peripheral ISR process, the Tick interrupt line must have higher priority + (numerically lower) than the peripheral interrupt. Otherwise the caller + ISR process will be blocked. + (++) functions affecting time base configurations are declared as __Weak + to make override possible in case of other implementations in user file. + +@endverbatim + * @{ + */ + +/** + * @brief This function configures the Flash prefetch, + * Configures time base source, NVIC and Low level hardware + * @note This function is called at the beginning of program after reset and before + * the clock configuration + * @note The time base configuration is based on MSI clock when exiting from Reset. + * Once done, time base tick start incrementing. + * In the default implementation,Systick is used as source of time base. + * the tick variable is incremented each 1ms in its ISR. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_Init(void) +{ + /* Configure Flash prefetch */ +#if (PREFETCH_ENABLE != 0) + __HAL_FLASH_PREFETCH_BUFFER_ENABLE(); +#endif /* PREFETCH_ENABLE */ + + /* Set Interrupt Group Priority */ + HAL_NVIC_SetPriorityGrouping(NVIC_PRIORITYGROUP_4); + + /* Use systick as time base source and configure 1ms tick (default clock after Reset is MSI) */ + HAL_InitTick(TICK_INT_PRIORITY); + + /* Init the low level hardware */ + HAL_MspInit(); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief This function de-Initializes common part of the HAL and stops the source + * of time base. + * @note This function is optional. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DeInit(void) +{ + /* Reset of all peripherals */ + __HAL_RCC_APB1_FORCE_RESET(); + __HAL_RCC_APB1_RELEASE_RESET(); + + __HAL_RCC_APB2_FORCE_RESET(); + __HAL_RCC_APB2_RELEASE_RESET(); + + __HAL_RCC_AHB_FORCE_RESET(); + __HAL_RCC_AHB_RELEASE_RESET(); + + /* De-Init the low level hardware */ + HAL_MspDeInit(); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Initializes the MSP. + * @retval None + */ +__weak void HAL_MspInit(void) +{ + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes the MSP. + * @retval None + */ +__weak void HAL_MspDeInit(void) +{ + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief This function configures the source of the time base. + * The time source is configured to have 1ms time base with a dedicated + * Tick interrupt priority. + * @note This function is called automatically at the beginning of program after + * reset by HAL_Init() or at any time when clock is reconfigured by HAL_RCC_ClockConfig(). + * @note In the default implementation, SysTick timer is the source of time base. + * It is used to generate interrupts at regular time intervals. + * Care must be taken if HAL_Delay() is called from a peripheral ISR process, + * The the SysTick interrupt must have higher priority (numerically lower) + * than the peripheral interrupt. Otherwise the caller ISR process will be blocked. + * The function is declared as __Weak to be overwritten in case of other + * implementation in user file. + * @param TickPriority: Tick interrupt priority. + * @retval HAL status + */ +__weak HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority) +{ + /*Configure the SysTick to have interrupt in 1ms time basis*/ + HAL_SYSTICK_Config(SystemCoreClock /1000); + + /*Configure the SysTick IRQ priority */ + HAL_NVIC_SetPriority(SysTick_IRQn, TickPriority ,0); + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup HAL_Exported_Functions_Group2 HAL Control functions + * @brief HAL Control functions + * +@verbatim + =============================================================================== + ##### HAL Control functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Provide a tick value in millisecond + (+) Provide a blocking delay in millisecond + (+) Suspend the time base source interrupt + (+) Resume the time base source interrupt + (+) Get the HAL API driver version + (+) Get the device identifier + (+) Get the device revision identifier + (+) Enable/Disable Debug module during Sleep mode + (+) Enable/Disable Debug module during STOP mode + (+) Enable/Disable Debug module during STANDBY mode + +@endverbatim + * @{ + */ + +/** + * @brief This function is called to increment a global variable "uwTick" + * used as application time base. + * @note In the default implementation, this variable is incremented each 1ms + * in Systick ISR. + * @note This function is declared as __weak to be overwritten in case of other + * implementations in user file. + * @retval None + */ +__weak void HAL_IncTick(void) +{ + uwTick++; +} + +/** + * @brief Provides a tick value in millisecond. + * @note This function is declared as __weak to be overwritten in case of other + * implementations in user file. + * @retval tick value + */ +__weak uint32_t HAL_GetTick(void) +{ + return uwTick; +} + +/** + * @brief This function provides accurate delay (in milliseconds) based + * on variable incremented. + * @note In the default implementation , SysTick timer is the source of time base. + * It is used to generate interrupts at regular time intervals where uwTick + * is incremented. + * @note ThiS function is declared as __weak to be overwritten in case of other + * implementations in user file. + * @param Delay: specifies the delay time length, in milliseconds. + * @retval None + */ +__weak void HAL_Delay(__IO uint32_t Delay) +{ + uint32_t tickstart = 0; + tickstart = HAL_GetTick(); + while((HAL_GetTick() - tickstart) < Delay) + { + } +} + +/** + * @brief Suspend Tick increment. + * @note In the default implementation , SysTick timer is the source of time base. It is + * used to generate interrupts at regular time intervals. Once HAL_SuspendTick() + * is called, the the SysTick interrupt will be disabled and so Tick increment + * is suspended. + * @note This function is declared as __weak to be overwritten in case of other + * implementations in user file. + * @retval None + */ +__weak void HAL_SuspendTick(void) +{ + /* Disable SysTick Interrupt */ + CLEAR_BIT(SysTick->CTRL,SysTick_CTRL_TICKINT_Msk); +} + +/** + * @brief Resume Tick increment. + * @note In the default implementation , SysTick timer is the source of time base. It is + * used to generate interrupts at regular time intervals. Once HAL_ResumeTick() + * is called, the the SysTick interrupt will be enabled and so Tick increment + * is resumed. + * @note This function is declared as __weak to be overwritten in case of other + * implementations in user file. + * @retval None + */ +__weak void HAL_ResumeTick(void) +{ + /* Enable SysTick Interrupt */ + SET_BIT(SysTick->CTRL,SysTick_CTRL_TICKINT_Msk); +} + +/** + * @brief Returns the HAL revision + * @retval version: 0xXYZR (8bits for each decimal, R for RC) + */ +uint32_t HAL_GetHalVersion(void) +{ + return __STM32L1xx_HAL_VERSION; +} + +/** + * @brief Returns the device revision identifier. + * @retval Device revision identifier + */ +uint32_t HAL_GetREVID(void) +{ + return((DBGMCU->IDCODE) >> 16); +} + +/** + * @brief Returns the device identifier. + * @retval Device identifier + */ +uint32_t HAL_GetDEVID(void) +{ + return((DBGMCU->IDCODE) & IDCODE_DEVID_MASK); +} + +/** + * @brief Enable the Debug Module during SLEEP mode + * @retval None + */ +void HAL_DBGMCU_EnableDBGSleepMode(void) +{ + SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP); +} + +/** + * @brief Disable the Debug Module during SLEEP mode + * @retval None + */ +void HAL_DBGMCU_DisableDBGSleepMode(void) +{ + CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP); +} + +/** + * @brief Enable the Debug Module during STOP mode + * @retval None + */ +void HAL_DBGMCU_EnableDBGStopMode(void) +{ + SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP); +} + +/** + * @brief Disable the Debug Module during STOP mode + * @retval None + */ +void HAL_DBGMCU_DisableDBGStopMode(void) +{ + CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP); +} + +/** + * @brief Enable the Debug Module during STANDBY mode + * @retval None + */ +void HAL_DBGMCU_EnableDBGStandbyMode(void) +{ + SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY); +} + +/** + * @brief Disable the Debug Module during STANDBY mode + * @retval None + */ +void HAL_DBGMCU_DisableDBGStandbyMode(void) +{ + CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY); +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_adc.c b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_adc.c new file mode 100755 index 0000000..c3eed42 --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_adc.c @@ -0,0 +1,2090 @@ +/** + ****************************************************************************** + * @file stm32l1xx_hal_adc.c + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief This file provides firmware functions to manage the following + * functionalities of the Analog to Digital Convertor (ADC) + * peripheral: + * + Initialization and de-initialization functions + * ++ Initialization and Configuration of ADC + * + Operation functions + * ++ Start, stop, get result of conversions of regular + * group, using 3 possible modes: polling, interruption or DMA. + * + Control functions + * ++ Channels configuration on regular group + * ++ Channels configuration on injected group + * ++ Analog Watchdog configuration + * + State functions + * ++ ADC state machine management + * ++ Interrupts and flags management + * Other functions (extended functions) are available in file + * "stm32l1xx_hal_adc_ex.c". + * + @verbatim + ============================================================================== + ##### ADC peripheral features ##### + ============================================================================== + [..] + (+) 12-bit, 10-bit, 8-bit or 6-bit configurable resolution + + (+) Interrupt generation at the end of regular conversion, end of injected + conversion, and in case of analog watchdog or overrun events. + + (+) Single and continuous conversion modes. + + (+) Scan mode for conversion of several channels sequentially. + + (+) Data alignment with in-built data coherency. + + (+) Programmable sampling time (channel wise) + + (+) ADC conversion of regular group and injected group. + + (+) External trigger (timer or EXTI) with configurable polarity + for both regular and injected groups. + + (+) DMA request generation for transfer of conversions data of regular group. + + (+) ADC offset on injected channels + + (+) ADC supply requirements: 2.4 V to 3.6 V at full speed and down to 1.8 V at + slower speed. + + (+) ADC input range: from Vref- (connected to Vssa) to Vref+ (connected to + Vdda or to an external voltage reference). + + + ##### How to use this driver ##### + ============================================================================== + [..] + + *** Configuration of top level parameters related to ADC *** + ============================================================ + [..] + + (#) Enable the ADC interface + (++) As prerequisite, ADC clock must be configured at RCC top level. + Caution: On STM32L1, ADC clock frequency max is 16MHz (refer + to device datasheet). + Therefore, ADC clock prescaler must be configured in + function of ADC clock source frequency to remain below + this maximum frequency. + + (++) Two clock settings are mandatory: + (+++) ADC clock (core clock). + (+++) ADC clock (conversions clock). + Only one possible clock source: derived from HSI RC 16MHz oscillator + (HSI). + ADC is connected directly to HSI RC 16MHz oscillator. + Therefore, RCC PLL setting has no impact on ADC. + PLL can be disabled (".PLL.PLLState = RCC_PLL_NONE") or + enabled with HSI16 as clock source + (".PLL.PLLSource = RCC_PLLSOURCE_HSI") to be used as device + main clock source SYSCLK. + The only mandatory setting is ".HSIState = RCC_HSI_ON" + + (+++) Example: + Into HAL_ADC_MspInit() (recommended code location) or with + other device clock parameters configuration: + (+++) __HAL_RCC_ADC1_CLK_ENABLE(); + + (+++) HAL_RCC_GetOscConfig(&RCC_OscInitStructure); + (+++) RCC_OscInitStructure.OscillatorType = (... | RCC_OSCILLATORTYPE_HSI); + (+++) RCC_OscInitStructure.HSIState = RCC_HSI_ON; + (+++) RCC_OscInitStructure.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT; + (+++) RCC_OscInitStructure.PLL.PLLState = RCC_PLL_NONE; + (+++) RCC_OscInitStructure.PLL.PLLSource = ... + (+++) RCC_OscInitStructure.PLL... + (+++) HAL_RCC_OscConfig(&RCC_OscInitStructure); + + (++) ADC clock prescaler is configured at ADC level with + parameter "ClockPrescaler" using function HAL_ADC_Init(). + + (#) ADC pins configuration + (++) Enable the clock for the ADC GPIOs + using macro __HAL_RCC_GPIOx_CLK_ENABLE() + (++) Configure these ADC pins in analog mode + using function HAL_GPIO_Init() + + (#) Optionally, in case of usage of ADC with interruptions: + (++) Configure the NVIC for ADC + using function HAL_NVIC_EnableIRQ(ADCx_IRQn) + (++) Insert the ADC interruption handler function HAL_ADC_IRQHandler() + into the function of corresponding ADC interruption vector + ADCx_IRQHandler(). + + (#) Optionally, in case of usage of DMA: + (++) Configure the DMA (DMA channel, mode normal or circular, ...) + using function HAL_DMA_Init(). + (++) Configure the NVIC for DMA + using function HAL_NVIC_EnableIRQ(DMAx_Channelx_IRQn) + (++) Insert the ADC interruption handler function HAL_ADC_IRQHandler() + into the function of corresponding DMA interruption vector + DMAx_Channelx_IRQHandler(). + + *** Configuration of ADC, groups regular/injected, channels parameters *** + ========================================================================== + [..] + + (#) Configure the ADC parameters (resolution, data alignment, ...) + and regular group parameters (conversion trigger, sequencer, ...) + using function HAL_ADC_Init(). + + (#) Configure the channels for regular group parameters (channel number, + channel rank into sequencer, ..., into regular group) + using function HAL_ADC_ConfigChannel(). + + (#) Optionally, configure the injected group parameters (conversion trigger, + sequencer, ..., of injected group) + and the channels for injected group parameters (channel number, + channel rank into sequencer, ..., into injected group) + using function HAL_ADCEx_InjectedConfigChannel(). + + (#) Optionally, configure the analog watchdog parameters (channels + monitored, thresholds, ...) + using function HAL_ADC_AnalogWDGConfig(). + + (#) Optionally, for devices with several ADC instances: configure the + multimode parameters + using function HAL_ADCEx_MultiModeConfigChannel(). + + *** Execution of ADC conversions *** + ==================================== + [..] + + (#) ADC driver can be used among three modes: polling, interruption, + transfer by DMA. + + (++) ADC conversion by polling: + (+++) Activate the ADC peripheral and start conversions + using function HAL_ADC_Start() + (+++) Wait for ADC conversion completion + using function HAL_ADC_PollForConversion() + (or for injected group: HAL_ADCEx_InjectedPollForConversion() ) + (+++) Retrieve conversion results + using function HAL_ADC_GetValue() + (or for injected group: HAL_ADCEx_InjectedGetValue() ) + (+++) Stop conversion and disable the ADC peripheral + using function HAL_ADC_Stop() + + (++) ADC conversion by interruption: + (+++) Activate the ADC peripheral and start conversions + using function HAL_ADC_Start_IT() + (+++) Wait for ADC conversion completion by call of function + HAL_ADC_ConvCpltCallback() + (this function must be implemented in user program) + (or for injected group: HAL_ADCEx_InjectedConvCpltCallback() ) + (+++) Retrieve conversion results + using function HAL_ADC_GetValue() + (or for injected group: HAL_ADCEx_InjectedGetValue() ) + (+++) Stop conversion and disable the ADC peripheral + using function HAL_ADC_Stop_IT() + + (++) ADC conversion with transfer by DMA: + (+++) Activate the ADC peripheral and start conversions + using function HAL_ADC_Start_DMA() + (+++) Wait for ADC conversion completion by call of function + HAL_ADC_ConvCpltCallback() or HAL_ADC_ConvHalfCpltCallback() + (these functions must be implemented in user program) + (+++) Conversion results are automatically transferred by DMA into + destination variable address. + (+++) Stop conversion and disable the ADC peripheral + using function HAL_ADC_Stop_DMA() + + (++) For devices with several ADCs: ADC multimode conversion + with transfer by DMA: + (+++) Activate the ADC peripheral (slave) and start conversions + using function HAL_ADC_Start() + (+++) Activate the ADC peripheral (master) and start conversions + using function HAL_ADCEx_MultiModeStart_DMA() + (+++) Wait for ADC conversion completion by call of function + HAL_ADC_ConvCpltCallback() or HAL_ADC_ConvHalfCpltCallback() + (these functions must be implemented in user program) + (+++) Conversion results are automatically transferred by DMA into + destination variable address. + (+++) Stop conversion and disable the ADC peripheral (master) + using function HAL_ADCEx_MultiModeStop_DMA() + (+++) Stop conversion and disable the ADC peripheral (slave) + using function HAL_ADC_Stop_IT() + + [..] + + (@) Callback functions must be implemented in user program: + (+@) HAL_ADC_ErrorCallback() + (+@) HAL_ADC_LevelOutOfWindowCallback() (callback of analog watchdog) + (+@) HAL_ADC_ConvCpltCallback() + (+@) HAL_ADC_ConvHalfCpltCallback + (+@) HAL_ADCEx_InjectedConvCpltCallback() + + *** Deinitialization of ADC *** + ============================================================ + [..] + + (#) Disable the ADC interface + (++) ADC clock can be hard reset and disabled at RCC top level. + (++) Hard reset of ADC peripherals + using macro __ADCx_FORCE_RESET(), __ADCx_RELEASE_RESET(). + (++) ADC clock disable + using the equivalent macro/functions as configuration step. + (+++) Example: + Into HAL_ADC_MspDeInit() (recommended code location) or with + other device clock parameters configuration: + (+++) HAL_RCC_GetOscConfig(&RCC_OscInitStructure); + (+++) RCC_OscInitStructure.OscillatorType = RCC_OSCILLATORTYPE_HSI; + (+++) RCC_OscInitStructure.HSIState = RCC_HSI_OFF; (if not used for system clock) + (+++) HAL_RCC_OscConfig(&RCC_OscInitStructure); + + (#) ADC pins configuration + (++) Disable the clock for the ADC GPIOs + using macro __HAL_RCC_GPIOx_CLK_DISABLE() + + (#) Optionally, in case of usage of ADC with interruptions: + (++) Disable the NVIC for ADC + using function HAL_NVIC_EnableIRQ(ADCx_IRQn) + + (#) Optionally, in case of usage of DMA: + (++) Deinitialize the DMA + using function HAL_DMA_Init(). + (++) Disable the NVIC for DMA + using function HAL_NVIC_EnableIRQ(DMAx_Channelx_IRQn) + + [..] + + @endverbatim + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_hal.h" + +/** @addtogroup STM32L1xx_HAL_Driver + * @{ + */ + +/** @defgroup ADC ADC + * @brief ADC HAL module driver + * @{ + */ + +#ifdef HAL_ADC_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup ADC_Private_Constants ADC Private Constants + * @{ + */ + + /* Timeout values for ADC enable and disable settling time. */ + /* Values defined to be higher than worst cases: low clocks freq, */ + /* maximum prescaler. */ + /* Ex of profile low frequency : Clock source at 0.1 MHz, ADC clock */ + /* prescaler 4, sampling time 7.5 ADC clock cycles, resolution 12 bits. */ + /* Unit: ms */ + #define ADC_ENABLE_TIMEOUT ((uint32_t) 2) + #define ADC_DISABLE_TIMEOUT ((uint32_t) 2) + + /* Delay for ADC stabilization time. */ + /* Maximum delay is 1us (refer to device datasheet, parameter tSTAB). */ + /* Unit: us */ + #define ADC_STAB_DELAY_US ((uint32_t) 3) + + /* Delay for temperature sensor stabilization time. */ + /* Maximum delay is 10us (refer to device datasheet, parameter tSTART). */ + /* Unit: us */ + #define ADC_TEMPSENSOR_DELAY_US ((uint32_t) 10) + +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup ADC_Private_Functions ADC Private Functions + * @{ + */ +static void ADC_DMAConvCplt(DMA_HandleTypeDef *hdma); +static void ADC_DMAHalfConvCplt(DMA_HandleTypeDef *hdma); +static void ADC_DMAError(DMA_HandleTypeDef *hdma); +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup ADC_Exported_Functions ADC Exported Functions + * @{ + */ + +/** @defgroup ADC_Exported_Functions_Group1 ADC Initialization/de-initialization functions + * @brief ADC Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Initialize and configure the ADC. + (+) De-initialize the ADC. +@endverbatim + * @{ + */ + +/** + * @brief Initializes the ADC peripheral and regular group according to + * parameters specified in structure "ADC_InitTypeDef". + * @note As prerequisite, ADC clock must be configured at RCC top level + * (clock source APB2). + * See commented example code below that can be copied and uncommented + * into HAL_ADC_MspInit(). + * @note Possibility to update parameters on the fly: + * This function initializes the ADC MSP (HAL_ADC_MspInit()) only when + * coming from ADC state reset. Following calls to this function can + * be used to reconfigure some parameters of ADC_InitTypeDef + * structure on the fly, without modifying MSP configuration. If ADC + * MSP has to be modified again, HAL_ADC_DeInit() must be called + * before HAL_ADC_Init(). + * The setting of these parameters is conditioned to ADC state. + * For parameters constraints, see comments of structure + * "ADC_InitTypeDef". + * @note This function configures the ADC within 2 scopes: scope of entire + * ADC and scope of regular group. For parameters details, see comments + * of structure "ADC_InitTypeDef". + * @param hadc: ADC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADC_Init(ADC_HandleTypeDef* hadc) +{ + HAL_StatusTypeDef tmp_hal_status = HAL_OK; + uint32_t tmp_cr1 = 0; + uint32_t tmp_cr2 = 0; + + /* Check ADC handle */ + if(hadc == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + assert_param(IS_ADC_CLOCKPRESCALER(hadc->Init.ClockPrescaler)); + assert_param(IS_ADC_RESOLUTION(hadc->Init.Resolution)); + assert_param(IS_ADC_DATA_ALIGN(hadc->Init.DataAlign)); + assert_param(IS_ADC_SCAN_MODE(hadc->Init.ScanConvMode)); + assert_param(IS_ADC_EOC_SELECTION(hadc->Init.EOCSelection)); + assert_param(IS_ADC_AUTOWAIT(hadc->Init.LowPowerAutoWait)); + assert_param(IS_ADC_AUTOPOWEROFF(hadc->Init.LowPowerAutoPowerOff)); + assert_param(IS_ADC_CHANNELSBANK(hadc->Init.ChannelsBank)); + assert_param(IS_FUNCTIONAL_STATE(hadc->Init.ContinuousConvMode)); + assert_param(IS_ADC_EXTTRIG(hadc->Init.ExternalTrigConv)); + assert_param(IS_FUNCTIONAL_STATE(hadc->Init.DMAContinuousRequests)); + + if(hadc->Init.ScanConvMode != ADC_SCAN_DISABLE) + { + assert_param(IS_ADC_REGULAR_NB_CONV(hadc->Init.NbrOfConversion)); + assert_param(IS_FUNCTIONAL_STATE(hadc->Init.DiscontinuousConvMode)); + if(hadc->Init.DiscontinuousConvMode != DISABLE) + { + assert_param(IS_ADC_REGULAR_DISCONT_NUMBER(hadc->Init.NbrOfDiscConversion)); + } + } + + if(hadc->Init.ExternalTrigConv != ADC_SOFTWARE_START) + { + assert_param(IS_ADC_EXTTRIG_EDGE(hadc->Init.ExternalTrigConvEdge)); + } + + + /* As prerequisite, into HAL_ADC_MspInit(), ADC clock must be configured */ + /* at RCC top level. */ + /* Refer to header of this file for more details on clock enabling */ + /* procedure. */ + + /* Actions performed only if ADC is coming from state reset: */ + /* - Initialization of ADC MSP */ + if (hadc->State == HAL_ADC_STATE_RESET) + { + /* Initialize ADC error code */ + ADC_CLEAR_ERRORCODE(hadc); + + /* Allocate lock resource and initialize it */ + hadc->Lock = HAL_UNLOCKED; + + /* Enable SYSCFG clock to control the routing Interface (RI) */ + __HAL_RCC_SYSCFG_CLK_ENABLE(); + + /* Init the low level hardware */ + HAL_ADC_MspInit(hadc); + } + + /* Configuration of ADC parameters if previous preliminary actions are */ + /* correctly completed. */ + if (HAL_IS_BIT_CLR(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL)) + { + /* Set ADC state */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_REG_BUSY | HAL_ADC_STATE_INJ_BUSY, + HAL_ADC_STATE_BUSY_INTERNAL); + + /* Set ADC parameters */ + + /* Configuration of common ADC clock: clock source HSI with selectable */ + /* prescaler */ + MODIFY_REG(ADC->CCR , + ADC_CCR_ADCPRE , + hadc->Init.ClockPrescaler ); + + /* Configuration of ADC: */ + /* - external trigger polarity */ + /* - End of conversion selection */ + /* - DMA continuous request */ + /* - Channels bank (Banks availability depends on devices categories) */ + /* - continuous conversion mode */ + tmp_cr2 |= (hadc->Init.DataAlign | + hadc->Init.EOCSelection | + ADC_CR2_DMACONTREQ(hadc->Init.DMAContinuousRequests) | + hadc->Init.ChannelsBank | + ADC_CR2_CONTINUOUS(hadc->Init.ContinuousConvMode) ); + + /* Enable external trigger if trigger selection is different of software */ + /* start. */ + /* Note: This configuration keeps the hardware feature of parameter */ + /* ExternalTrigConvEdge "trigger edge none" equivalent to */ + /* software start. */ + if (hadc->Init.ExternalTrigConv != ADC_SOFTWARE_START) + { + tmp_cr2 |= ( hadc->Init.ExternalTrigConv | + hadc->Init.ExternalTrigConvEdge ); + } + + /* Parameters update conditioned to ADC state: */ + /* Parameters that can be updated only when ADC is disabled: */ + /* - delay selection (LowPowerAutoWait mode) */ + /* - resolution */ + /* - auto power off (LowPowerAutoPowerOff mode) */ + /* - scan mode */ + /* - discontinuous mode disable/enable */ + /* - discontinuous mode number of conversions */ + if ((ADC_IS_ENABLE(hadc) == RESET)) + { + tmp_cr2 |= hadc->Init.LowPowerAutoWait; + + tmp_cr1 |= (hadc->Init.Resolution | + hadc->Init.LowPowerAutoPowerOff | + ADC_CR1_SCAN_SET(hadc->Init.ScanConvMode) ); + + /* Enable discontinuous mode only if continuous mode is disabled */ + /* Note: If parameter "Init.ScanConvMode" is set to disable, parameter */ + /* discontinuous is set anyway, but has no effect on ADC HW. */ + if (hadc->Init.DiscontinuousConvMode == ENABLE) + { + if (hadc->Init.ContinuousConvMode == DISABLE) + { + /* Enable the selected ADC regular discontinuous mode */ + /* Set the number of channels to be converted in discontinuous mode */ + SET_BIT(tmp_cr1, ADC_CR1_DISCEN | + ADC_CR1_DISCONTINUOUS_NUM(hadc->Init.NbrOfDiscConversion) ); + } + else + { + /* ADC regular group settings continuous and sequencer discontinuous*/ + /* cannot be enabled simultaneously. */ + + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_CONFIG); + + /* Set ADC error code to ADC IP internal error */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL); + } + } + + /* Update ADC configuration register CR1 with previous settings */ + MODIFY_REG(hadc->Instance->CR1, + ADC_CR1_RES | + ADC_CR1_PDI | + ADC_CR1_PDD | + ADC_CR1_DISCNUM | + ADC_CR1_DISCEN | + ADC_CR1_SCAN , + tmp_cr1 ); + } + + /* Update ADC configuration register CR2 with previous settings */ + MODIFY_REG(hadc->Instance->CR2 , + ADC_CR2_MASK_ADCINIT() , + tmp_cr2 ); + + /* Configuration of regular group sequencer: */ + /* - if scan mode is disabled, regular channels sequence length is set to */ + /* 0x00: 1 channel converted (channel on regular rank 1) */ + /* Parameter "NbrOfConversion" is discarded. */ + /* Note: Scan mode is present by hardware on this device and, if */ + /* disabled, discards automatically nb of conversions. Anyway, nb of */ + /* conversions is forced to 0x00 for alignment over all STM32 devices. */ + /* - if scan mode is enabled, regular channels sequence length is set to */ + /* parameter "NbrOfConversion" */ + if (ADC_CR1_SCAN_SET(hadc->Init.ScanConvMode) == ADC_SCAN_ENABLE) + { + MODIFY_REG(hadc->Instance->SQR1 , + ADC_SQR1_L , + ADC_SQR1_L_SHIFT(hadc->Init.NbrOfConversion) ); + } + else + { + MODIFY_REG(hadc->Instance->SQR1, + ADC_SQR1_L , + 0x00000000 ); + } + + /* Check back that ADC registers have effectively been configured to */ + /* ensure of no potential problem of ADC core IP clocking. */ + /* Check through register CR2 (excluding execution control bits ADON, */ + /* JSWSTART, SWSTART and injected trigger bits JEXTEN and JEXTSEL). */ + if ((READ_REG(hadc->Instance->CR2) & ~(ADC_CR2_ADON | + ADC_CR2_SWSTART | ADC_CR2_JSWSTART | + ADC_CR2_JEXTEN | ADC_CR2_JEXTSEL )) + == tmp_cr2) + { + /* Set ADC error code to none */ + ADC_CLEAR_ERRORCODE(hadc); + + /* Set the ADC state */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_BUSY_INTERNAL, + HAL_ADC_STATE_READY); + } + else + { + /* Update ADC state machine to error */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_BUSY_INTERNAL, + HAL_ADC_STATE_ERROR_INTERNAL); + + /* Set ADC error code to ADC IP internal error */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL); + + tmp_hal_status = HAL_ERROR; + } + + } + else + { + tmp_hal_status = HAL_ERROR; + } + + /* Return function status */ + return tmp_hal_status; +} + +/** + * @brief Deinitialize the ADC peripheral registers to its default reset values. + * @note To not impact other ADCs, reset of common ADC registers have been + * left commented below. + * If needed, the example code can be copied and uncommented into + * function HAL_ADC_MspDeInit(). + * @param hadc: ADC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADC_DeInit(ADC_HandleTypeDef* hadc) +{ + HAL_StatusTypeDef tmp_hal_status = HAL_OK; + + /* Check ADC handle */ + if(hadc == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Set ADC state */ + SET_BIT(hadc->State, HAL_ADC_STATE_BUSY_INTERNAL); + + /* Stop potential conversion on going, on regular and injected groups */ + /* Disable ADC peripheral */ + tmp_hal_status = ADC_ConversionStop_Disable(hadc); + + + /* Configuration of ADC parameters if previous preliminary actions are */ + /* correctly completed. */ + if (tmp_hal_status == HAL_OK) + { + /* ========== Reset ADC registers ========== */ + /* Reset register SR */ + __HAL_ADC_CLEAR_FLAG(hadc, (ADC_FLAG_AWD | ADC_FLAG_JEOC | ADC_FLAG_EOC | + ADC_FLAG_JSTRT | ADC_FLAG_STRT)); + + /* Reset register CR1 */ + CLEAR_BIT(hadc->Instance->CR1, (ADC_CR1_OVRIE | ADC_CR1_RES | ADC_CR1_AWDEN | + ADC_CR1_JAWDEN | ADC_CR1_PDI | ADC_CR1_PDD | + ADC_CR1_DISCNUM | ADC_CR1_JDISCEN | ADC_CR1_DISCEN | + ADC_CR1_JAUTO | ADC_CR1_AWDSGL | ADC_CR1_SCAN | + ADC_CR1_JEOCIE | ADC_CR1_AWDIE | ADC_CR1_EOCIE | + ADC_CR1_AWDCH )); + + /* Reset register CR2 */ + ADC_CR2_CLEAR(hadc); + + /* Reset register SMPR0 */ + ADC_SMPR0_CLEAR(hadc); + + /* Reset register SMPR1 */ + ADC_SMPR1_CLEAR(hadc); + + /* Reset register SMPR2 */ + CLEAR_BIT(hadc->Instance->SMPR2, (ADC_SMPR2_SMP19 | ADC_SMPR2_SMP18 | ADC_SMPR2_SMP17 | + ADC_SMPR2_SMP16 | ADC_SMPR2_SMP15 | ADC_SMPR2_SMP14 | + ADC_SMPR2_SMP13 | ADC_SMPR2_SMP12 | ADC_SMPR2_SMP11 | + ADC_SMPR2_SMP10 )); + + /* Reset register SMPR3 */ + CLEAR_BIT(hadc->Instance->SMPR3, (ADC_SMPR3_SMP9 | ADC_SMPR3_SMP8 | ADC_SMPR3_SMP7 | + ADC_SMPR3_SMP6 | ADC_SMPR3_SMP5 | ADC_SMPR3_SMP4 | + ADC_SMPR3_SMP3 | ADC_SMPR3_SMP2 | ADC_SMPR3_SMP1 | + ADC_SMPR3_SMP0 )); + + /* Reset register JOFR1 */ + CLEAR_BIT(hadc->Instance->JOFR1, ADC_JOFR1_JOFFSET1); + /* Reset register JOFR2 */ + CLEAR_BIT(hadc->Instance->JOFR2, ADC_JOFR2_JOFFSET2); + /* Reset register JOFR3 */ + CLEAR_BIT(hadc->Instance->JOFR3, ADC_JOFR3_JOFFSET3); + /* Reset register JOFR4 */ + CLEAR_BIT(hadc->Instance->JOFR4, ADC_JOFR4_JOFFSET4); + + /* Reset register HTR */ + CLEAR_BIT(hadc->Instance->HTR, ADC_HTR_HT); + /* Reset register LTR */ + CLEAR_BIT(hadc->Instance->LTR, ADC_LTR_LT); + + /* Reset register SQR1 */ + CLEAR_BIT(hadc->Instance->SQR1, (ADC_SQR1_L | __ADC_SQR1_SQXX)); + + /* Reset register SQR2 */ + CLEAR_BIT(hadc->Instance->SQR2, (ADC_SQR2_SQ24 | ADC_SQR2_SQ23 | ADC_SQR2_SQ22 | + ADC_SQR2_SQ21 | ADC_SQR2_SQ20 | ADC_SQR2_SQ19 )); + + /* Reset register SQR3 */ + CLEAR_BIT(hadc->Instance->SQR3, (ADC_SQR3_SQ18 | ADC_SQR3_SQ17 | ADC_SQR3_SQ16 | + ADC_SQR3_SQ15 | ADC_SQR3_SQ14 | ADC_SQR3_SQ13 )); + + /* Reset register SQR4 */ + CLEAR_BIT(hadc->Instance->SQR4, (ADC_SQR4_SQ12 | ADC_SQR4_SQ11 | ADC_SQR4_SQ10 | + ADC_SQR4_SQ9 | ADC_SQR4_SQ8 | ADC_SQR4_SQ7 )); + + /* Reset register SQR5 */ + CLEAR_BIT(hadc->Instance->SQR5, (ADC_SQR5_SQ6 | ADC_SQR5_SQ5 | ADC_SQR5_SQ4 | + ADC_SQR5_SQ3 | ADC_SQR5_SQ2 | ADC_SQR5_SQ1 )); + + + /* Reset register JSQR */ + CLEAR_BIT(hadc->Instance->JSQR, (ADC_JSQR_JL | + ADC_JSQR_JSQ4 | ADC_JSQR_JSQ3 | + ADC_JSQR_JSQ2 | ADC_JSQR_JSQ1 )); + + /* Reset register DR */ + /* bits in access mode read only, no direct reset applicable*/ + + /* Reset registers JDR1, JDR2, JDR3, JDR4 */ + /* bits in access mode read only, no direct reset applicable*/ + + /* Reset register CCR */ + CLEAR_BIT(ADC->CCR, ADC_CCR_TSVREFE); + + /* ========== Hard reset ADC peripheral ========== */ + /* Performs a global reset of the entire ADC peripheral: ADC state is */ + /* forced to a similar state after device power-on. */ + /* If needed, copy-paste and uncomment the following reset code into */ + /* function "void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc)": */ + /* */ + /* __HAL_RCC_ADC1_FORCE_RESET() */ + /* __HAL_RCC_ADC1_RELEASE_RESET() */ + + /* DeInit the low level hardware */ + HAL_ADC_MspDeInit(hadc); + + /* Set ADC error code to none */ + ADC_CLEAR_ERRORCODE(hadc); + + /* Set ADC state */ + hadc->State = HAL_ADC_STATE_RESET; + + } + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + /* Return function status */ + return tmp_hal_status; +} + +/** + * @brief Initializes the ADC MSP. + * @param hadc: ADC handle + * @retval None + */ +__weak void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hadc); + + /* NOTE : This function should not be modified. When the callback is needed, + function HAL_ADC_MspInit must be implemented in the user file. + */ +} + +/** + * @brief DeInitializes the ADC MSP. + * @param hadc: ADC handle + * @retval None + */ +__weak void HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hadc); + + /* NOTE : This function should not be modified. When the callback is needed, + function HAL_ADC_MspDeInit must be implemented in the user file. + */ +} + +/** + * @} + */ + +/** @defgroup ADC_Exported_Functions_Group2 ADC Input and Output operation functions + * @brief ADC IO operation functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Start conversion of regular group. + (+) Stop conversion of regular group. + (+) Poll for conversion complete on regular group. + (+) Poll for conversion event. + (+) Get result of regular channel conversion. + (+) Start conversion of regular group and enable interruptions. + (+) Stop conversion of regular group and disable interruptions. + (+) Handle ADC interrupt request + (+) Start conversion of regular group and enable DMA transfer. + (+) Stop conversion of regular group and disable ADC DMA transfer. +@endverbatim + * @{ + */ + +/** + * @brief Enables ADC, starts conversion of regular group. + * Interruptions enabled in this function: None. + * @param hadc: ADC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADC_Start(ADC_HandleTypeDef* hadc) +{ + HAL_StatusTypeDef tmp_hal_status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Process locked */ + __HAL_LOCK(hadc); + + /* Enable the ADC peripheral */ + tmp_hal_status = ADC_Enable(hadc); + + /* Start conversion if ADC is effectively enabled */ + if (tmp_hal_status == HAL_OK) + { + /* Set ADC state */ + /* - Clear state bitfield related to regular group conversion results */ + /* - Set state bitfield related to regular group operation */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_READY | HAL_ADC_STATE_REG_EOC | HAL_ADC_STATE_REG_OVR, + HAL_ADC_STATE_REG_BUSY); + + /* If conversions on group regular are also triggering group injected, */ + /* update ADC state. */ + if (READ_BIT(hadc->Instance->CR1, ADC_CR1_JAUTO) != RESET) + { + ADC_STATE_CLR_SET(hadc->State, HAL_ADC_STATE_INJ_EOC, HAL_ADC_STATE_INJ_BUSY); + } + + /* State machine update: Check if an injected conversion is ongoing */ + if (HAL_IS_BIT_SET(hadc->State, HAL_ADC_STATE_INJ_BUSY)) + { + /* Reset ADC error code fields related to conversions on group regular */ + CLEAR_BIT(hadc->ErrorCode, (HAL_ADC_ERROR_OVR | HAL_ADC_ERROR_DMA)); + } + else + { + /* Reset ADC all error code fields */ + ADC_CLEAR_ERRORCODE(hadc); + } + + /* Process unlocked */ + /* Unlock before starting ADC conversions: in case of potential */ + /* interruption, to let the process to ADC IRQ Handler. */ + __HAL_UNLOCK(hadc); + + /* Clear regular group conversion flag and overrun flag */ + /* (To ensure of no unknown state from potential previous ADC operations) */ + __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_EOC | ADC_FLAG_OVR); + + /* Enable conversion of regular group. */ + /* If software start has been selected, conversion starts immediately. */ + /* If external trigger has been selected, conversion will start at next */ + /* trigger event. */ + if (ADC_IS_SOFTWARE_START_REGULAR(hadc)) + { + /* Start ADC conversion on regular group */ + SET_BIT(hadc->Instance->CR2, ADC_CR2_SWSTART); + } + } + + /* Return function status */ + return tmp_hal_status; +} + +/** + * @brief Stop ADC conversion of regular group (and injected channels in + * case of auto_injection mode), disable ADC peripheral. + * @note: ADC peripheral disable is forcing stop of potential + * conversion on injected group. If injected group is under use, it + * should be preliminarily stopped using HAL_ADCEx_InjectedStop function. + * @param hadc: ADC handle + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_ADC_Stop(ADC_HandleTypeDef* hadc) +{ + HAL_StatusTypeDef tmp_hal_status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Process locked */ + __HAL_LOCK(hadc); + + /* Stop potential conversion on going, on regular and injected groups */ + /* Disable ADC peripheral */ + tmp_hal_status = ADC_ConversionStop_Disable(hadc); + + /* Check if ADC is effectively disabled */ + if (tmp_hal_status == HAL_OK) + { + /* Set ADC state */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_REG_BUSY | HAL_ADC_STATE_INJ_BUSY, + HAL_ADC_STATE_READY); + } + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + /* Return function status */ + return tmp_hal_status; +} + +/** + * @brief Wait for regular group conversion to be completed. + * @note ADC conversion flags EOS (end of sequence) and EOC (end of + * conversion) are cleared by this function, with an exception: + * if low power feature "LowPowerAutoWait" is enabled, flags are + * not cleared to not interfere with this feature until data register + * is read using function HAL_ADC_GetValue(). + * @note This function cannot be used in a particular setup: ADC configured + * in DMA mode and polling for end of each conversion (ADC init + * parameter "EOCSelection" set to ADC_EOC_SINGLE_CONV). + * In this case, DMA resets the flag EOC and polling cannot be + * performed on each conversion. Nevertheless, polling can still + * be performed on the complete sequence (ADC init + * parameter "EOCSelection" set to ADC_EOC_SEQ_CONV). + * @param hadc: ADC handle + * @param Timeout: Timeout value in millisecond. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADC_PollForConversion(ADC_HandleTypeDef* hadc, uint32_t Timeout) +{ + uint32_t tickstart = 0; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Verification that ADC configuration is compliant with polling for */ + /* each conversion: */ + /* Particular case is ADC configured in DMA mode and ADC sequencer with */ + /* several ranks and polling for end of each conversion. */ + /* For code simplicity sake, this particular case is generalized to */ + /* ADC configured in DMA mode and and polling for end of each conversion. */ + if (HAL_IS_BIT_SET(hadc->Instance->CR2, ADC_CR2_EOCS) && + HAL_IS_BIT_SET(hadc->Instance->CR2, ADC_CR2_DMA) ) + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_CONFIG); + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + return HAL_ERROR; + } + + /* Get tick count */ + tickstart = HAL_GetTick(); + + /* Wait until End of Conversion flag is raised */ + while(HAL_IS_BIT_CLR(hadc->Instance->SR, ADC_FLAG_EOC)) + { + /* Check if timeout is disabled (set to infinite wait) */ + if(Timeout != HAL_MAX_DELAY) + { + if((Timeout == 0) || ((HAL_GetTick() - tickstart ) > Timeout)) + { + /* Update ADC state machine to timeout */ + SET_BIT(hadc->State, HAL_ADC_STATE_TIMEOUT); + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + return HAL_TIMEOUT; + } + } + } + + /* Clear end of conversion flag of regular group if low power feature */ + /* "Auto Wait" is disabled, to not interfere with this feature until data */ + /* register is read using function HAL_ADC_GetValue(). */ + if (hadc->Init.LowPowerAutoWait == DISABLE) + { + /* Clear regular group conversion flag */ + __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_STRT | ADC_FLAG_EOC); + } + + /* Update ADC state machine */ + SET_BIT(hadc->State, HAL_ADC_STATE_REG_EOC); + + /* Determine whether any further conversion upcoming on group regular */ + /* by external trigger, continuous mode or scan sequence on going. */ + /* Note: On STM32L1, there is no independent flag of end of sequence. */ + /* The test of scan sequence on going is done either with scan */ + /* sequence disabled or with end of conversion flag set to */ + /* of end of sequence. */ + if(ADC_IS_SOFTWARE_START_REGULAR(hadc) && + (hadc->Init.ContinuousConvMode == DISABLE) && + (HAL_IS_BIT_CLR(hadc->Instance->SQR1, ADC_SQR1_L) || + HAL_IS_BIT_CLR(hadc->Instance->CR2, ADC_CR2_EOCS) ) ) + { + /* Set ADC state */ + CLEAR_BIT(hadc->State, HAL_ADC_STATE_REG_BUSY); + + if (HAL_IS_BIT_CLR(hadc->State, HAL_ADC_STATE_INJ_BUSY)) + { + SET_BIT(hadc->State, HAL_ADC_STATE_READY); + } + } + + /* Return ADC state */ + return HAL_OK; +} + +/** + * @brief Poll for conversion event. + * @param hadc: ADC handle + * @param EventType: the ADC event type. + * This parameter can be one of the following values: + * @arg ADC_AWD_EVENT: ADC Analog watchdog event. + * @arg ADC_OVR_EVENT: ADC Overrun event. + * @param Timeout: Timeout value in millisecond. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADC_PollForEvent(ADC_HandleTypeDef* hadc, uint32_t EventType, uint32_t Timeout) +{ + uint32_t tickstart = 0; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + assert_param(IS_ADC_EVENT_TYPE(EventType)); + + /* Get tick count */ + tickstart = HAL_GetTick(); + + /* Check selected event flag */ + while(__HAL_ADC_GET_FLAG(hadc, EventType) == RESET) + { + /* Check if timeout is disabled (set to infinite wait) */ + if(Timeout != HAL_MAX_DELAY) + { + if((Timeout == 0) || ((HAL_GetTick() - tickstart ) > Timeout)) + { + /* Update ADC state machine to timeout */ + SET_BIT(hadc->State, HAL_ADC_STATE_TIMEOUT); + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + return HAL_TIMEOUT; + } + } + } + + switch(EventType) + { + /* Analog watchdog (level out of window) event */ + case ADC_AWD_EVENT: + /* Set ADC state */ + SET_BIT(hadc->State, HAL_ADC_STATE_AWD1); + + /* Clear ADC analog watchdog flag */ + __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_AWD); + break; + + /* Overrun event */ + default: /* Case ADC_OVR_EVENT */ + /* Note: On STM32L1, ADC overrun can be set through other parameters */ + /* refer to description of parameter "EOCSelection" for more */ + /* details. */ + + /* Set ADC state */ + SET_BIT(hadc->State, HAL_ADC_STATE_REG_OVR); + /* Set ADC error code to overrun */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_OVR); + + /* Clear ADC overrun flag */ + __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_OVR); + break; + } + + /* Return ADC state */ + return HAL_OK; +} + +/** + * @brief Enables ADC, starts conversion of regular group with interruption. + * Interruptions enabled in this function: + * - EOC (end of conversion of regular group) + * - overrun + * Each of these interruptions has its dedicated callback function. + * @param hadc: ADC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADC_Start_IT(ADC_HandleTypeDef* hadc) +{ + HAL_StatusTypeDef tmp_hal_status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Process locked */ + __HAL_LOCK(hadc); + + /* Enable the ADC peripheral */ + tmp_hal_status = ADC_Enable(hadc); + + /* Start conversion if ADC is effectively enabled */ + if (tmp_hal_status == HAL_OK) + { + /* Set ADC state */ + /* - Clear state bitfield related to regular group conversion results */ + /* - Set state bitfield related to regular group operation */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_READY | HAL_ADC_STATE_REG_EOC | HAL_ADC_STATE_REG_OVR, + HAL_ADC_STATE_REG_BUSY); + + /* If conversions on group regular are also triggering group injected, */ + /* update ADC state. */ + if (READ_BIT(hadc->Instance->CR1, ADC_CR1_JAUTO) != RESET) + { + ADC_STATE_CLR_SET(hadc->State, HAL_ADC_STATE_INJ_EOC, HAL_ADC_STATE_INJ_BUSY); + } + + /* State machine update: Check if an injected conversion is ongoing */ + if (HAL_IS_BIT_SET(hadc->State, HAL_ADC_STATE_INJ_BUSY)) + { + /* Reset ADC error code fields related to conversions on group regular */ + CLEAR_BIT(hadc->ErrorCode, (HAL_ADC_ERROR_OVR | HAL_ADC_ERROR_DMA)); + } + else + { + /* Reset ADC all error code fields */ + ADC_CLEAR_ERRORCODE(hadc); + } + + /* Process unlocked */ + /* Unlock before starting ADC conversions: in case of potential */ + /* interruption, to let the process to ADC IRQ Handler. */ + __HAL_UNLOCK(hadc); + + /* Clear regular group conversion flag and overrun flag */ + /* (To ensure of no unknown state from potential previous ADC operations) */ + __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_EOC | ADC_FLAG_OVR); + + /* Enable end of conversion interrupt for regular group */ + __HAL_ADC_ENABLE_IT(hadc, (ADC_IT_EOC | ADC_IT_OVR)); + + /* Enable conversion of regular group. */ + /* If software start has been selected, conversion starts immediately. */ + /* If external trigger has been selected, conversion will start at next */ + /* trigger event. */ + if (ADC_IS_SOFTWARE_START_REGULAR(hadc)) + { + /* Start ADC conversion on regular group */ + SET_BIT(hadc->Instance->CR2, ADC_CR2_SWSTART); + } + } + + /* Return function status */ + return tmp_hal_status; +} + +/** + * @brief Stop ADC conversion of regular group (and injected group in + * case of auto_injection mode), disable interrution of + * end-of-conversion, disable ADC peripheral. + * @param hadc: ADC handle + * @retval None + */ +HAL_StatusTypeDef HAL_ADC_Stop_IT(ADC_HandleTypeDef* hadc) +{ + HAL_StatusTypeDef tmp_hal_status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Process locked */ + __HAL_LOCK(hadc); + + /* Stop potential conversion on going, on regular and injected groups */ + /* Disable ADC peripheral */ + tmp_hal_status = ADC_ConversionStop_Disable(hadc); + + /* Check if ADC is effectively disabled */ + if (tmp_hal_status == HAL_OK) + { + /* Disable ADC end of conversion interrupt for regular group */ + __HAL_ADC_DISABLE_IT(hadc, ADC_IT_EOC); + + /* Set ADC state */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_REG_BUSY | HAL_ADC_STATE_INJ_BUSY, + HAL_ADC_STATE_READY); + } + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + /* Return function status */ + return tmp_hal_status; +} + +/** + * @brief Enables ADC, starts conversion of regular group and transfers result + * through DMA. + * Interruptions enabled in this function: + * - DMA transfer complete + * - DMA half transfer + * - overrun + * Each of these interruptions has its dedicated callback function. + * @param hadc: ADC handle + * @param pData: The destination Buffer address. + * @param Length: The length of data to be transferred from ADC peripheral to memory. + * @retval None + */ +HAL_StatusTypeDef HAL_ADC_Start_DMA(ADC_HandleTypeDef* hadc, uint32_t* pData, uint32_t Length) +{ + HAL_StatusTypeDef tmp_hal_status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Process locked */ + __HAL_LOCK(hadc); + + /* Enable the ADC peripheral */ + tmp_hal_status = ADC_Enable(hadc); + + /* Start conversion if ADC is effectively enabled */ + if (tmp_hal_status == HAL_OK) + { + /* Set ADC state */ + /* - Clear state bitfield related to regular group conversion results */ + /* - Set state bitfield related to regular group operation */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_READY | HAL_ADC_STATE_REG_EOC | HAL_ADC_STATE_REG_OVR, + HAL_ADC_STATE_REG_BUSY); + + /* If conversions on group regular are also triggering group injected, */ + /* update ADC state. */ + if (READ_BIT(hadc->Instance->CR1, ADC_CR1_JAUTO) != RESET) + { + ADC_STATE_CLR_SET(hadc->State, HAL_ADC_STATE_INJ_EOC, HAL_ADC_STATE_INJ_BUSY); + } + + /* State machine update: Check if an injected conversion is ongoing */ + if (HAL_IS_BIT_SET(hadc->State, HAL_ADC_STATE_INJ_BUSY)) + { + /* Reset ADC error code fields related to conversions on group regular */ + CLEAR_BIT(hadc->ErrorCode, (HAL_ADC_ERROR_OVR | HAL_ADC_ERROR_DMA)); + } + else + { + /* Reset ADC all error code fields */ + ADC_CLEAR_ERRORCODE(hadc); + } + + /* Process unlocked */ + /* Unlock before starting ADC conversions: in case of potential */ + /* interruption, to let the process to ADC IRQ Handler. */ + __HAL_UNLOCK(hadc); + + /* Set the DMA transfer complete callback */ + hadc->DMA_Handle->XferCpltCallback = ADC_DMAConvCplt; + + /* Set the DMA half transfer complete callback */ + hadc->DMA_Handle->XferHalfCpltCallback = ADC_DMAHalfConvCplt; + + /* Set the DMA error callback */ + hadc->DMA_Handle->XferErrorCallback = ADC_DMAError; + + + /* Manage ADC and DMA start: ADC overrun interruption, DMA start, ADC */ + /* start (in case of SW start): */ + + /* Clear regular group conversion flag and overrun flag */ + /* (To ensure of no unknown state from potential previous ADC operations) */ + __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_EOC | ADC_FLAG_OVR); + + /* Enable ADC overrun interrupt */ + __HAL_ADC_ENABLE_IT(hadc, ADC_IT_OVR); + + /* Enable ADC DMA mode */ + hadc->Instance->CR2 |= ADC_CR2_DMA; + + /* Start the DMA channel */ + HAL_DMA_Start_IT(hadc->DMA_Handle, (uint32_t)&hadc->Instance->DR, (uint32_t)pData, Length); + + /* Enable conversion of regular group. */ + /* If software start has been selected, conversion starts immediately. */ + /* If external trigger has been selected, conversion will start at next */ + /* trigger event. */ + /* Note: Alternate trigger for single conversion could be to force an */ + /* additional set of bit ADON "hadc->Instance->CR2 |= ADC_CR2_ADON;"*/ + if (ADC_IS_SOFTWARE_START_REGULAR(hadc)) + { + /* Start ADC conversion on regular group */ + SET_BIT(hadc->Instance->CR2, ADC_CR2_SWSTART); + } + } + + /* Return function status */ + return tmp_hal_status; +} + +/** + * @brief Stop ADC conversion of regular group (and injected group in + * case of auto_injection mode), disable ADC DMA transfer, disable + * ADC peripheral. + * @note: ADC peripheral disable is forcing stop of potential + * conversion on injected group. If injected group is under use, it + * should be preliminarily stopped using HAL_ADCEx_InjectedStop function. + * @param hadc: ADC handle + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_ADC_Stop_DMA(ADC_HandleTypeDef* hadc) +{ + HAL_StatusTypeDef tmp_hal_status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Process locked */ + __HAL_LOCK(hadc); + + /* Stop potential conversion on going, on regular and injected groups */ + /* Disable ADC peripheral */ + tmp_hal_status = ADC_ConversionStop_Disable(hadc); + + /* Check if ADC is effectively disabled */ + if (tmp_hal_status == HAL_OK) + { + /* Disable ADC DMA mode */ + hadc->Instance->CR2 &= ~ADC_CR2_DMA; + + /* Disable the DMA channel (in case of DMA in circular mode or stop while */ + /* DMA transfer is on going) */ + tmp_hal_status = HAL_DMA_Abort(hadc->DMA_Handle); + + /* Check if DMA channel effectively disabled */ + if (tmp_hal_status == HAL_OK) + { + /* Set ADC state */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_REG_BUSY | HAL_ADC_STATE_INJ_BUSY, + HAL_ADC_STATE_READY); + } + else + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_DMA); + } + + /* Disable ADC overrun interrupt */ + __HAL_ADC_DISABLE_IT(hadc, ADC_IT_OVR); + } + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + /* Return function status */ + return tmp_hal_status; +} + +/** + * @brief Get ADC regular group conversion result. + * @note Reading register DR automatically clears ADC flag EOC + * (ADC group regular end of unitary conversion). + * @note This function does not clear ADC flag EOS + * (ADC group regular end of sequence conversion). + * Occurrence of flag EOS rising: + * - If sequencer is composed of 1 rank, flag EOS is equivalent + * to flag EOC. + * - If sequencer is composed of several ranks, during the scan + * sequence flag EOC only is raised, at the end of the scan sequence + * both flags EOC and EOS are raised. + * To clear this flag, either use function: + * in programming model IT: @ref HAL_ADC_IRQHandler(), in programming + * model polling: @ref HAL_ADC_PollForConversion() + * or @ref __HAL_ADC_CLEAR_FLAG(&hadc, ADC_FLAG_EOS). + * @param hadc: ADC handle + * @retval ADC group regular conversion data + */ +uint32_t HAL_ADC_GetValue(ADC_HandleTypeDef* hadc) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Note: EOC flag is not cleared here by software because automatically */ + /* cleared by hardware when reading register DR. */ + + /* Return ADC converted value */ + return hadc->Instance->DR; +} + +/** + * @brief Handles ADC interrupt request + * @param hadc: ADC handle + * @retval None + */ +void HAL_ADC_IRQHandler(ADC_HandleTypeDef* hadc) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + assert_param(IS_FUNCTIONAL_STATE(hadc->Init.ContinuousConvMode)); + assert_param(IS_ADC_REGULAR_NB_CONV(hadc->Init.NbrOfConversion)); + + + /* ========== Check End of Conversion flag for regular group ========== */ + if(__HAL_ADC_GET_IT_SOURCE(hadc, ADC_IT_EOC)) + { + if(__HAL_ADC_GET_FLAG(hadc, ADC_FLAG_EOC) ) + { + /* Update state machine on conversion status if not in error state */ + if (HAL_IS_BIT_CLR(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL)) + { + /* Set ADC state */ + SET_BIT(hadc->State, HAL_ADC_STATE_REG_EOC); + } + + /* Determine whether any further conversion upcoming on group regular */ + /* by external trigger, continuous mode or scan sequence on going. */ + /* Note: On STM32L1, there is no independent flag of end of sequence. */ + /* The test of scan sequence on going is done either with scan */ + /* sequence disabled or with end of conversion flag set to */ + /* of end of sequence. */ + if(ADC_IS_SOFTWARE_START_REGULAR(hadc) && + (hadc->Init.ContinuousConvMode == DISABLE) && + (HAL_IS_BIT_CLR(hadc->Instance->SQR1, ADC_SQR1_L) || + HAL_IS_BIT_CLR(hadc->Instance->CR2, ADC_CR2_EOCS) ) ) + { + /* Disable ADC end of single conversion interrupt on group regular */ + /* Note: Overrun interrupt was enabled with EOC interrupt in */ + /* HAL_ADC_Start_IT(), but is not disabled here because can be used */ + /* by overrun IRQ process below. */ + __HAL_ADC_DISABLE_IT(hadc, ADC_IT_EOC); + + /* Set ADC state */ + CLEAR_BIT(hadc->State, HAL_ADC_STATE_REG_BUSY); + + if (HAL_IS_BIT_CLR(hadc->State, HAL_ADC_STATE_INJ_BUSY)) + { + SET_BIT(hadc->State, HAL_ADC_STATE_READY); + } + } + + /* Conversion complete callback */ + HAL_ADC_ConvCpltCallback(hadc); + + /* Clear regular group conversion flag */ + __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_STRT | ADC_FLAG_EOC); + } + } + + /* ========== Check End of Conversion flag for injected group ========== */ + if(__HAL_ADC_GET_IT_SOURCE(hadc, ADC_IT_JEOC)) + { + if(__HAL_ADC_GET_FLAG(hadc, ADC_FLAG_JEOC)) + { + /* Update state machine on conversion status if not in error state */ + if (HAL_IS_BIT_CLR(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL)) + { + /* Set ADC state */ + SET_BIT(hadc->State, HAL_ADC_STATE_INJ_EOC); + } + + /* Determine whether any further conversion upcoming on group injected */ + /* by external trigger, scan sequence on going or by automatic injected */ + /* conversion from group regular (same conditions as group regular */ + /* interruption disabling above). */ + if(ADC_IS_SOFTWARE_START_INJECTED(hadc) && + (HAL_IS_BIT_CLR(hadc->Instance->JSQR, ADC_JSQR_JL) || + HAL_IS_BIT_CLR(hadc->Instance->CR2, ADC_CR2_EOCS) ) && + (HAL_IS_BIT_CLR(hadc->Instance->CR1, ADC_CR1_JAUTO) && + (ADC_IS_SOFTWARE_START_REGULAR(hadc) && + (hadc->Init.ContinuousConvMode == DISABLE) ) ) ) + { + /* Disable ADC end of single conversion interrupt on group injected */ + __HAL_ADC_DISABLE_IT(hadc, ADC_IT_JEOC); + + /* Set ADC state */ + CLEAR_BIT(hadc->State, HAL_ADC_STATE_INJ_BUSY); + + if (HAL_IS_BIT_CLR(hadc->State, HAL_ADC_STATE_REG_BUSY)) + { + SET_BIT(hadc->State, HAL_ADC_STATE_READY); + } + } + + /* Conversion complete callback */ + HAL_ADCEx_InjectedConvCpltCallback(hadc); + + /* Clear injected group conversion flag */ + __HAL_ADC_CLEAR_FLAG(hadc, (ADC_FLAG_JSTRT | ADC_FLAG_JEOC)); + } + } + + /* ========== Check Analog watchdog flags ========== */ + if(__HAL_ADC_GET_IT_SOURCE(hadc, ADC_IT_AWD)) + { + if(__HAL_ADC_GET_FLAG(hadc, ADC_FLAG_AWD)) + { + /* Set ADC state */ + SET_BIT(hadc->State, HAL_ADC_STATE_AWD1); + + /* Level out of window callback */ + HAL_ADC_LevelOutOfWindowCallback(hadc); + + /* Clear the ADC analog watchdog flag */ + __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_AWD); + } + } + + /* ========== Check Overrun flag ========== */ + if(__HAL_ADC_GET_IT_SOURCE(hadc, ADC_IT_OVR)) + { + if(__HAL_ADC_GET_FLAG(hadc, ADC_FLAG_OVR)) + { + /* Note: On STM32L1, ADC overrun can be set through other parameters */ + /* refer to description of parameter "EOCSelection" for more */ + /* details. */ + + /* Set ADC error code to overrun */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_OVR); + + /* Clear ADC overrun flag */ + __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_OVR); + + /* Error callback */ + HAL_ADC_ErrorCallback(hadc); + + /* Clear the Overrun flag */ + __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_OVR); + } + } + +} + +/** + * @brief Conversion complete callback in non blocking mode + * @param hadc: ADC handle + * @retval None + */ +__weak void HAL_ADC_ConvCpltCallback(ADC_HandleTypeDef* hadc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hadc); + + /* NOTE : This function should not be modified. When the callback is needed, + function HAL_ADC_ConvCpltCallback must be implemented in the user file. + */ +} + +/** + * @brief Conversion DMA half-transfer callback in non blocking mode + * @param hadc: ADC handle + * @retval None + */ +__weak void HAL_ADC_ConvHalfCpltCallback(ADC_HandleTypeDef* hadc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hadc); + + /* NOTE : This function should not be modified. When the callback is needed, + function HAL_ADC_ConvHalfCpltCallback must be implemented in the user file. + */ +} + +/** + * @brief Analog watchdog callback in non blocking mode. + * @param hadc: ADC handle + * @retval None + */ +__weak void HAL_ADC_LevelOutOfWindowCallback(ADC_HandleTypeDef* hadc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hadc); + + /* NOTE : This function should not be modified. When the callback is needed, + function HAL_ADC_LevelOutOfWindowCallback must be implemented in the user file. + */ +} + +/** + * @brief ADC error callback in non blocking mode + * (ADC conversion with interruption or transfer by DMA) + * @note In case of error due to overrun when using ADC with DMA transfer + * (HAL ADC handle paramater "ErrorCode" to state "HAL_ADC_ERROR_OVR"): + * - Reinitialize the DMA using function "HAL_ADC_Stop_DMA()". + * - If needed, restart a new ADC conversion using function + * "HAL_ADC_Start_DMA()" + * (this function is also clearing overrun flag) + * @param hadc: ADC handle + * @retval None + */ +__weak void HAL_ADC_ErrorCallback(ADC_HandleTypeDef *hadc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hadc); + + /* NOTE : This function should not be modified. When the callback is needed, + function HAL_ADC_ErrorCallback must be implemented in the user file. + */ +} + + +/** + * @} + */ + +/** @defgroup ADC_Exported_Functions_Group3 Peripheral Control functions + * @brief Peripheral Control functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Configure channels on regular group + (+) Configure the analog watchdog + +@endverbatim + * @{ + */ + +/** + * @brief Configures the the selected channel to be linked to the regular + * group. + * @note In case of usage of internal measurement channels: + * Vbat/VrefInt/TempSensor. + * These internal paths can be be disabled using function + * HAL_ADC_DeInit(). + * @note Possibility to update parameters on the fly: + * This function initializes channel into regular group, following + * calls to this function can be used to reconfigure some parameters + * of structure "ADC_ChannelConfTypeDef" on the fly, without reseting + * the ADC. + * The setting of these parameters is conditioned to ADC state. + * For parameters constraints, see comments of structure + * "ADC_ChannelConfTypeDef". + * @param hadc: ADC handle + * @param sConfig: Structure of ADC channel for regular group. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADC_ConfigChannel(ADC_HandleTypeDef* hadc, ADC_ChannelConfTypeDef* sConfig) +{ + HAL_StatusTypeDef tmp_hal_status = HAL_OK; + __IO uint32_t wait_loop_index = 0; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + assert_param(IS_ADC_CHANNEL(sConfig->Channel)); + assert_param(IS_ADC_REGULAR_RANK(sConfig->Rank)); + assert_param(IS_ADC_SAMPLE_TIME(sConfig->SamplingTime)); + + /* Process locked */ + __HAL_LOCK(hadc); + + + /* Regular sequence configuration */ + /* For Rank 1 to 6 */ + if (sConfig->Rank < 7) + { + MODIFY_REG(hadc->Instance->SQR5, + ADC_SQR5_RK(ADC_SQR5_SQ1, sConfig->Rank), + ADC_SQR5_RK(sConfig->Channel, sConfig->Rank) ); + } + /* For Rank 7 to 12 */ + else if (sConfig->Rank < 13) + { + MODIFY_REG(hadc->Instance->SQR4, + ADC_SQR4_RK(ADC_SQR4_SQ7, sConfig->Rank), + ADC_SQR4_RK(sConfig->Channel, sConfig->Rank) ); + } + /* For Rank 13 to 18 */ + else if (sConfig->Rank < 19) + { + MODIFY_REG(hadc->Instance->SQR3, + ADC_SQR3_RK(ADC_SQR3_SQ13, sConfig->Rank), + ADC_SQR3_RK(sConfig->Channel, sConfig->Rank) ); + } + /* For Rank 19 to 24 */ + else if (sConfig->Rank < 25) + { + MODIFY_REG(hadc->Instance->SQR2, + ADC_SQR2_RK(ADC_SQR2_SQ19, sConfig->Rank), + ADC_SQR2_RK(sConfig->Channel, sConfig->Rank) ); + } + /* For Rank 25 to 28 */ + else + { + MODIFY_REG(hadc->Instance->SQR1, + ADC_SQR1_RK(ADC_SQR1_SQ25, sConfig->Rank), + ADC_SQR1_RK(sConfig->Channel, sConfig->Rank) ); + } + + + /* Channel sampling time configuration */ + /* For channels 0 to 9 */ + if (sConfig->Channel < ADC_CHANNEL_10) + { + MODIFY_REG(hadc->Instance->SMPR3, + ADC_SMPR3(ADC_SMPR3_SMP0, sConfig->Channel), + ADC_SMPR3(sConfig->SamplingTime, sConfig->Channel) ); + } + /* For channels 10 to 19 */ + else if (sConfig->Channel < ADC_CHANNEL_20) + { + MODIFY_REG(hadc->Instance->SMPR2, + ADC_SMPR2(ADC_SMPR2_SMP10, sConfig->Channel), + ADC_SMPR2(sConfig->SamplingTime, sConfig->Channel) ); + } + /* For channels 20 to 26 for devices Cat.1, Cat.2, Cat.3 */ + /* For channels 20 to 29 for devices Cat4, Cat.5 */ + else if (sConfig->Channel <= ADC_SMPR1_CHANNEL_MAX) + { + MODIFY_REG(hadc->Instance->SMPR1, + ADC_SMPR1(ADC_SMPR1_SMP20, sConfig->Channel), + ADC_SMPR1(sConfig->SamplingTime, sConfig->Channel) ); + } + /* For channels 30 to 31 for devices Cat4, Cat.5 */ + else + { + ADC_SMPR0_CHANNEL_SET(hadc, sConfig->SamplingTime, sConfig->Channel); + } + + /* If ADC1 Channel_16 or Channel_17 is selected, enable Temperature sensor */ + /* and VREFINT measurement path. */ + if ((sConfig->Channel == ADC_CHANNEL_TEMPSENSOR) || + (sConfig->Channel == ADC_CHANNEL_VREFINT) ) + { + if (READ_BIT(ADC->CCR, ADC_CCR_TSVREFE) == RESET) + { + SET_BIT(ADC->CCR, ADC_CCR_TSVREFE); + + if ((sConfig->Channel == ADC_CHANNEL_TEMPSENSOR)) + { + /* Delay for temperature sensor stabilization time */ + /* Compute number of CPU cycles to wait for */ + wait_loop_index = (ADC_TEMPSENSOR_DELAY_US * (SystemCoreClock / 1000000)); + while(wait_loop_index != 0) + { + wait_loop_index--; + } + } + } + } + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + /* Return function status */ + return tmp_hal_status; +} + +/** + * @brief Configures the analog watchdog. + * @note Analog watchdog thresholds can be modified while ADC conversion + * is on going. + * In this case, some constraints must be taken into account: + * the programmed threshold values are effective from the next + * ADC EOC (end of unitary conversion). + * Considering that registers write delay may happen due to + * bus activity, this might cause an uncertainty on the + * effective timing of the new programmed threshold values. + * @param hadc: ADC handle + * @param AnalogWDGConfig: Structure of ADC analog watchdog configuration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADC_AnalogWDGConfig(ADC_HandleTypeDef* hadc, ADC_AnalogWDGConfTypeDef* AnalogWDGConfig) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + assert_param(IS_ADC_ANALOG_WATCHDOG_MODE(AnalogWDGConfig->WatchdogMode)); + assert_param(IS_FUNCTIONAL_STATE(AnalogWDGConfig->ITMode)); + assert_param(IS_ADC_RANGE(ADC_RESOLUTION_12B, AnalogWDGConfig->HighThreshold)); + assert_param(IS_ADC_RANGE(ADC_RESOLUTION_12B, AnalogWDGConfig->LowThreshold)); + + if((AnalogWDGConfig->WatchdogMode == ADC_ANALOGWATCHDOG_SINGLE_REG) || + (AnalogWDGConfig->WatchdogMode == ADC_ANALOGWATCHDOG_SINGLE_INJEC) || + (AnalogWDGConfig->WatchdogMode == ADC_ANALOGWATCHDOG_SINGLE_REGINJEC) ) + { + assert_param(IS_ADC_CHANNEL(AnalogWDGConfig->Channel)); + } + + /* Process locked */ + __HAL_LOCK(hadc); + + /* Analog watchdog configuration */ + + /* Configure ADC Analog watchdog interrupt */ + if(AnalogWDGConfig->ITMode == ENABLE) + { + /* Enable the ADC Analog watchdog interrupt */ + __HAL_ADC_ENABLE_IT(hadc, ADC_IT_AWD); + } + else + { + /* Disable the ADC Analog watchdog interrupt */ + __HAL_ADC_DISABLE_IT(hadc, ADC_IT_AWD); + } + + /* Configuration of analog watchdog: */ + /* - Set the analog watchdog enable mode: regular and/or injected groups, */ + /* one or all channels. */ + /* - Set the Analog watchdog channel (is not used if watchdog */ + /* mode "all channels": ADC_CFGR_AWD1SGL=0). */ + hadc->Instance->CR1 &= ~( ADC_CR1_AWDSGL | + ADC_CR1_JAWDEN | + ADC_CR1_AWDEN | + ADC_CR1_AWDCH ); + + hadc->Instance->CR1 |= ( AnalogWDGConfig->WatchdogMode | + AnalogWDGConfig->Channel ); + + /* Set the high threshold */ + hadc->Instance->HTR = AnalogWDGConfig->HighThreshold; + + /* Set the low threshold */ + hadc->Instance->LTR = AnalogWDGConfig->LowThreshold; + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + /* Return function status */ + return HAL_OK; +} + + +/** + * @} + */ + + +/** @defgroup ADC_Exported_Functions_Group4 Peripheral State functions + * @brief Peripheral State functions + * +@verbatim + =============================================================================== + ##### Peripheral State and Errors functions ##### + =============================================================================== + [..] + This subsection provides functions to get in run-time the status of the + peripheral. + (+) Check the ADC state + (+) Check the ADC error code + +@endverbatim + * @{ + */ + +/** + * @brief return the ADC state + * @param hadc: ADC handle + * @retval HAL state + */ +uint32_t HAL_ADC_GetState(ADC_HandleTypeDef* hadc) +{ + /* Return ADC state */ + return hadc->State; +} + +/** + * @brief Return the ADC error code + * @param hadc: ADC handle + * @retval ADC Error Code + */ +uint32_t HAL_ADC_GetError(ADC_HandleTypeDef *hadc) +{ + return hadc->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup ADC_Private_Functions ADC Private Functions + * @{ + */ + +/** + * @brief Enable the selected ADC. + * @note Prerequisite condition to use this function: ADC must be disabled + * and voltage regulator must be enabled (done into HAL_ADC_Init()). + * @note If low power mode AutoPowerOff is enabled, power-on/off phases are + * performed automatically by hardware. + * In this mode, this function is useless and must not be called because + * flag ADC_FLAG_RDY is not usable. + * Therefore, this function must be called under condition of + * "if (hadc->Init.LowPowerAutoPowerOff != ENABLE)". + * @param hadc: ADC handle + * @retval HAL status. + */ +HAL_StatusTypeDef ADC_Enable(ADC_HandleTypeDef* hadc) +{ + uint32_t tickstart = 0; + __IO uint32_t wait_loop_index = 0; + + /* ADC enable and wait for ADC ready (in case of ADC is disabled or */ + /* enabling phase not yet completed: flag ADC ready not yet set). */ + /* Timeout implemented to not be stuck if ADC cannot be enabled (possible */ + /* causes: ADC clock not running, ...). */ + if (ADC_IS_ENABLE(hadc) == RESET) + { + /* Enable the Peripheral */ + __HAL_ADC_ENABLE(hadc); + + /* Delay for ADC stabilization time */ + /* Compute number of CPU cycles to wait for */ + wait_loop_index = (ADC_STAB_DELAY_US * (SystemCoreClock / 1000000)); + while(wait_loop_index != 0) + { + wait_loop_index--; + } + + /* Get tick count */ + tickstart = HAL_GetTick(); + + /* Wait for ADC effectively enabled */ + while(ADC_IS_ENABLE(hadc) == RESET) + { + if((HAL_GetTick() - tickstart ) > ADC_ENABLE_TIMEOUT) + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL); + + /* Set ADC error code to ADC IP internal error */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL); + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + return HAL_ERROR; + } + } + } + + /* Return HAL status */ + return HAL_OK; +} + +/** + * @brief Stop ADC conversion and disable the selected ADC + * @note Prerequisite condition to use this function: ADC conversions must be + * stopped to disable the ADC. + * @param hadc: ADC handle + * @retval HAL status. + */ +HAL_StatusTypeDef ADC_ConversionStop_Disable(ADC_HandleTypeDef* hadc) +{ + uint32_t tickstart = 0; + + /* Verification if ADC is not already disabled */ + if (ADC_IS_ENABLE(hadc) != RESET) + { + /* Disable the ADC peripheral */ + __HAL_ADC_DISABLE(hadc); + + /* Get tick count */ + tickstart = HAL_GetTick(); + + /* Wait for ADC effectively disabled */ + while(ADC_IS_ENABLE(hadc) != RESET) + { + if((HAL_GetTick() - tickstart ) > ADC_DISABLE_TIMEOUT) + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL); + + /* Set ADC error code to ADC IP internal error */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL); + + return HAL_ERROR; + } + } + } + + /* Return HAL status */ + return HAL_OK; +} + +/** + * @brief DMA transfer complete callback. + * @param hdma: pointer to DMA handle. + * @retval None + */ +static void ADC_DMAConvCplt(DMA_HandleTypeDef *hdma) +{ + /* Retrieve ADC handle corresponding to current DMA handle */ + ADC_HandleTypeDef* hadc = ( ADC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; + + /* Update state machine on conversion status if not in error state */ + if (HAL_IS_BIT_CLR(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL | HAL_ADC_STATE_ERROR_DMA)) + { + /* Update ADC state machine */ + SET_BIT(hadc->State, HAL_ADC_STATE_REG_EOC); + + /* Determine whether any further conversion upcoming on group regular */ + /* by external trigger, continuous mode or scan sequence on going. */ + /* Note: On STM32L1, there is no independent flag of end of sequence. */ + /* The test of scan sequence on going is done either with scan */ + /* sequence disabled or with end of conversion flag set to */ + /* of end of sequence. */ + if(ADC_IS_SOFTWARE_START_REGULAR(hadc) && + (hadc->Init.ContinuousConvMode == DISABLE) && + (HAL_IS_BIT_CLR(hadc->Instance->SQR1, ADC_SQR1_L) || + HAL_IS_BIT_CLR(hadc->Instance->CR2, ADC_CR2_EOCS) ) ) + { + /* Disable ADC end of single conversion interrupt on group regular */ + /* Note: Overrun interrupt was enabled with EOC interrupt in */ + /* HAL_ADC_Start_IT(), but is not disabled here because can be used */ + /* by overrun IRQ process below. */ + __HAL_ADC_DISABLE_IT(hadc, ADC_IT_EOC); + + /* Set ADC state */ + CLEAR_BIT(hadc->State, HAL_ADC_STATE_REG_BUSY); + + if (HAL_IS_BIT_CLR(hadc->State, HAL_ADC_STATE_INJ_BUSY)) + { + SET_BIT(hadc->State, HAL_ADC_STATE_READY); + } + } + + /* Conversion complete callback */ + HAL_ADC_ConvCpltCallback(hadc); + } + else + { + /* Call DMA error callback */ + hadc->DMA_Handle->XferErrorCallback(hdma); + } +} + +/** + * @brief DMA half transfer complete callback. + * @param hdma: pointer to DMA handle. + * @retval None + */ +static void ADC_DMAHalfConvCplt(DMA_HandleTypeDef *hdma) +{ + /* Retrieve ADC handle corresponding to current DMA handle */ + ADC_HandleTypeDef* hadc = ( ADC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; + + /* Half conversion callback */ + HAL_ADC_ConvHalfCpltCallback(hadc); +} + +/** + * @brief DMA error callback + * @param hdma: pointer to DMA handle. + * @retval None + */ +static void ADC_DMAError(DMA_HandleTypeDef *hdma) +{ + /* Retrieve ADC handle corresponding to current DMA handle */ + ADC_HandleTypeDef* hadc = ( ADC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; + + /* Set ADC state */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_DMA); + + /* Set ADC error code to DMA error */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_DMA); + + /* Error callback */ + HAL_ADC_ErrorCallback(hadc); +} + +/** + * @} + */ + +#endif /* HAL_ADC_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_adc_ex.c b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_adc_ex.c new file mode 100755 index 0000000..5f0025a --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_adc_ex.c @@ -0,0 +1,886 @@ +/** + ****************************************************************************** + * @file stm32l1xx_hal_adc_ex.c + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief This file provides firmware functions to manage the following + * functionalities of the Analog to Digital Convertor (ADC) + * peripheral: + * + Operation functions + * ++ Start, stop, get result of conversions of injected + * group, using 2 possible modes: polling, interruption. + * ++ Calibration (ADC automatic self-calibration) + * + Control functions + * ++ Channels configuration on injected group + * Other functions (generic functions) are available in file + * "stm32l1xx_hal_adc.c". + * + @verbatim + [..] + (@) Sections "ADC peripheral features" and "How to use this driver" are + available in file of generic functions "stm32l1xx_hal_adc.c". + [..] + @endverbatim + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_hal.h" + +/** @addtogroup STM32L1xx_HAL_Driver + * @{ + */ + +/** @defgroup ADCEx ADCEx + * @brief ADC Extension HAL module driver + * @{ + */ + +#ifdef HAL_ADC_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup ADCEx_Private_Constants ADCEx Private Constants + * @{ + */ + + /* ADC conversion cycles (unit: ADC clock cycles) */ + /* (selected sampling time + conversion time of 12 ADC clock cycles, with */ + /* resolution 12 bits) */ + #define ADC_CONVERSIONCLOCKCYCLES_SAMPLETIME_4CYCLE5 ((uint32_t) 16) + #define ADC_CONVERSIONCLOCKCYCLES_SAMPLETIME_9CYCLES ((uint32_t) 21) + #define ADC_CONVERSIONCLOCKCYCLES_SAMPLETIME_16CYCLES ((uint32_t) 28) + #define ADC_CONVERSIONCLOCKCYCLES_SAMPLETIME_24CYCLES ((uint32_t) 36) + #define ADC_CONVERSIONCLOCKCYCLES_SAMPLETIME_48CYCLES ((uint32_t) 60) + #define ADC_CONVERSIONCLOCKCYCLES_SAMPLETIME_96CYCLES ((uint32_t)108) + #define ADC_CONVERSIONCLOCKCYCLES_SAMPLETIME_192CYCLES ((uint32_t)204) + #define ADC_CONVERSIONCLOCKCYCLES_SAMPLETIME_384CYCLES ((uint32_t)396) + + /* Delay for temperature sensor stabilization time. */ + /* Maximum delay is 10us (refer to device datasheet, parameter tSTART). */ + /* Unit: us */ + #define ADC_TEMPSENSOR_DELAY_US ((uint32_t) 10) + +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup ADCEx_Exported_Functions ADCEx Exported Functions + * @{ + */ + +/** @defgroup ADCEx_Exported_Functions_Group1 ADC Extended IO operation functions + * @brief ADC Extended Input and Output operation functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Start conversion of injected group. + (+) Stop conversion of injected group. + (+) Poll for conversion complete on injected group. + (+) Get result of injected channel conversion. + (+) Start conversion of injected group and enable interruptions. + (+) Stop conversion of injected group and disable interruptions. + +@endverbatim + * @{ + */ + +/** + * @brief Enables ADC, starts conversion of injected group. + * Interruptions enabled in this function: None. + * @param hadc: ADC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADCEx_InjectedStart(ADC_HandleTypeDef* hadc) +{ + HAL_StatusTypeDef tmp_hal_status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Process locked */ + __HAL_LOCK(hadc); + + /* Enable the ADC peripheral */ + tmp_hal_status = ADC_Enable(hadc); + + /* Start conversion if ADC is effectively enabled */ + if (tmp_hal_status == HAL_OK) + { + /* Set ADC state */ + /* - Clear state bitfield related to injected group conversion results */ + /* - Set state bitfield related to injected operation */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_READY | HAL_ADC_STATE_INJ_EOC, + HAL_ADC_STATE_INJ_BUSY); + + /* Check if a regular conversion is ongoing */ + /* Note: On this device, there is no ADC error code fields related to */ + /* conversions on group injected only. In case of conversion on */ + /* going on group regular, no error code is reset. */ + if (HAL_IS_BIT_CLR(hadc->State, HAL_ADC_STATE_REG_BUSY)) + { + /* Reset ADC all error code fields */ + ADC_CLEAR_ERRORCODE(hadc); + } + + /* Process unlocked */ + /* Unlock before starting ADC conversions: in case of potential */ + /* interruption, to let the process to ADC IRQ Handler. */ + __HAL_UNLOCK(hadc); + + /* Clear injected group conversion flag */ + /* (To ensure of no unknown state from potential previous ADC operations) */ + __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_JEOC); + + /* Enable conversion of injected group. */ + /* If software start has been selected, conversion starts immediately. */ + /* If external trigger has been selected, conversion will start at next */ + /* trigger event. */ + /* If automatic injected conversion is enabled, conversion will start */ + /* after next regular group conversion. */ + if (ADC_IS_SOFTWARE_START_INJECTED(hadc) && + HAL_IS_BIT_CLR(hadc->Instance->CR1, ADC_CR1_JAUTO) ) + { + /* Enable ADC software conversion for injected channels */ + SET_BIT(hadc->Instance->CR2, ADC_CR2_JSWSTART); + } + } + + /* Return function status */ + return tmp_hal_status; +} + +/** + * @brief Stop conversion of injected channels. Disable ADC peripheral if + * no regular conversion is on going. + * @note If ADC must be disabled and if conversion is on going on + * regular group, function HAL_ADC_Stop must be used to stop both + * injected and regular groups, and disable the ADC. + * @note If injected group mode auto-injection is enabled, + * function HAL_ADC_Stop must be used. + * @note In case of auto-injection mode, HAL_ADC_Stop must be used. + * @param hadc: ADC handle + * @retval None + */ +HAL_StatusTypeDef HAL_ADCEx_InjectedStop(ADC_HandleTypeDef* hadc) +{ + HAL_StatusTypeDef tmp_hal_status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Process locked */ + __HAL_LOCK(hadc); + + /* Stop potential conversion and disable ADC peripheral */ + /* Conditioned to: */ + /* - No conversion on the other group (regular group) is intended to */ + /* continue (injected and regular groups stop conversion and ADC disable */ + /* are common) */ + /* - In case of auto-injection mode, HAL_ADC_Stop must be used. */ + if(((hadc->State & HAL_ADC_STATE_REG_BUSY) == RESET) && + HAL_IS_BIT_CLR(hadc->Instance->CR1, ADC_CR1_JAUTO) ) + { + /* Stop potential conversion on going, on regular and injected groups */ + /* Disable ADC peripheral */ + tmp_hal_status = ADC_ConversionStop_Disable(hadc); + + /* Check if ADC is effectively disabled */ + if (tmp_hal_status == HAL_OK) + { + /* Set ADC state */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_REG_BUSY | HAL_ADC_STATE_INJ_BUSY, + HAL_ADC_STATE_READY); + } + } + else + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_CONFIG); + + tmp_hal_status = HAL_ERROR; + } + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + /* Return function status */ + return tmp_hal_status; +} + +/** + * @brief Wait for injected group conversion to be completed. + * @param hadc: ADC handle + * @param Timeout: Timeout value in millisecond. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADCEx_InjectedPollForConversion(ADC_HandleTypeDef* hadc, uint32_t Timeout) +{ + uint32_t tickstart; + + /* Variables for polling in case of scan mode enabled and polling for each */ + /* conversion. */ + /* Note: Variable "conversion_timeout_cpu_cycles" set to offset 28 CPU */ + /* cycles to compensate number of CPU cycles for processing of variable */ + /* "conversion_timeout_cpu_cycles_max" */ + uint32_t conversion_timeout_cpu_cycles = 28; + uint32_t conversion_timeout_cpu_cycles_max = 0; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Get timeout */ + tickstart = HAL_GetTick(); + + /* Polling for end of conversion: differentiation if single/sequence */ + /* conversion. */ + /* For injected group, flag JEOC is set only at the end of the sequence, */ + /* not for each conversion within the sequence. */ + /* If setting "EOCSelection" is set to poll for each single conversion, */ + /* management of polling depends on setting of injected group sequencer: */ + /* - If single conversion for injected group (scan mode disabled or */ + /* InjectedNbrOfConversion ==1), flag JEOC is used to determine the */ + /* conversion completion. */ + /* - If sequence conversion for injected group (scan mode enabled and */ + /* InjectedNbrOfConversion >=2), flag JEOC is set only at the end of the */ + /* sequence. */ + /* To poll for each conversion, the maximum conversion time is computed */ + /* from ADC conversion time (selected sampling time + conversion time of */ + /* 12 ADC clock cycles) and APB2/ADC clock prescalers (depending on */ + /* settings, conversion time range can vary from 8 to several thousands */ + /* of CPU cycles). */ + + /* Note: On STM32L1, setting "EOCSelection" is related to regular group */ + /* only, by hardware. For compatibility with other STM32 devices, */ + /* this setting is related also to injected group by software. */ + if (((hadc->Instance->JSQR & ADC_JSQR_JL) == RESET) || + (hadc->Init.EOCSelection != ADC_EOC_SINGLE_CONV) ) + { + /* Wait until End of Conversion flag is raised */ + while(HAL_IS_BIT_CLR(hadc->Instance->SR, ADC_FLAG_JEOC)) + { + /* Check if timeout is disabled (set to infinite wait) */ + if(Timeout != HAL_MAX_DELAY) + { + if((Timeout == 0) || ((HAL_GetTick() - tickstart ) > Timeout)) + { + /* Update ADC state machine to timeout */ + SET_BIT(hadc->State, HAL_ADC_STATE_TIMEOUT); + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + return HAL_TIMEOUT; + } + } + } + } + else + { + /* Computation of CPU cycles corresponding to ADC conversion cycles. */ + /* Retrieve ADC clock prescaler and ADC maximum conversion cycles on all */ + /* channels. */ + conversion_timeout_cpu_cycles_max = ADC_GET_CLOCK_PRESCALER_DECIMAL(hadc); + conversion_timeout_cpu_cycles_max *= ADC_CONVCYCLES_MAX_RANGE(hadc); + + /* Poll with maximum conversion time */ + while(conversion_timeout_cpu_cycles < conversion_timeout_cpu_cycles_max) + { + /* Check if timeout is disabled (set to infinite wait) */ + if(Timeout != HAL_MAX_DELAY) + { + if((Timeout == 0) || ((HAL_GetTick() - tickstart ) > Timeout)) + { + /* Update ADC state machine to timeout */ + SET_BIT(hadc->State, HAL_ADC_STATE_TIMEOUT); + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + return HAL_TIMEOUT; + } + } + conversion_timeout_cpu_cycles ++; + } + } + + /* Clear end of conversion flag of injected group if low power feature */ + /* "Auto Wait" is disabled, to not interfere with this feature until data */ + /* register is read using function HAL_ADCEx_InjectedGetValue(). */ + if (hadc->Init.LowPowerAutoWait == DISABLE) + { + /* Clear injected group conversion flag */ + __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_JSTRT | ADC_FLAG_JEOC); + } + + /* Update ADC state machine */ + SET_BIT(hadc->State, HAL_ADC_STATE_INJ_EOC); + + /* Determine whether any further conversion upcoming on group injected */ + /* by external trigger, continuous mode or scan sequence on going. */ + /* Note: On STM32L1, there is no independent flag of end of sequence. */ + /* The test of scan sequence on going is done either with scan */ + /* sequence disabled or with end of conversion flag set to */ + /* of end of sequence. */ + if(ADC_IS_SOFTWARE_START_INJECTED(hadc) && + (HAL_IS_BIT_CLR(hadc->Instance->JSQR, ADC_JSQR_JL) || + HAL_IS_BIT_CLR(hadc->Instance->CR2, ADC_CR2_EOCS) ) && + (HAL_IS_BIT_CLR(hadc->Instance->CR1, ADC_CR1_JAUTO) && + (ADC_IS_SOFTWARE_START_REGULAR(hadc) && + (hadc->Init.ContinuousConvMode == DISABLE) ) ) ) + { + /* Set ADC state */ + CLEAR_BIT(hadc->State, HAL_ADC_STATE_INJ_BUSY); + + if (HAL_IS_BIT_CLR(hadc->State, HAL_ADC_STATE_REG_BUSY)) + { + SET_BIT(hadc->State, HAL_ADC_STATE_READY); + } + } + + /* Return ADC state */ + return HAL_OK; +} + +/** + * @brief Enables ADC, starts conversion of injected group with interruption. + * - JEOC (end of conversion of injected group) + * Each of these interruptions has its dedicated callback function. + * @param hadc: ADC handle + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_ADCEx_InjectedStart_IT(ADC_HandleTypeDef* hadc) +{ + HAL_StatusTypeDef tmp_hal_status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Process locked */ + __HAL_LOCK(hadc); + + /* Enable the ADC peripheral */ + tmp_hal_status = ADC_Enable(hadc); + + /* Start conversion if ADC is effectively enabled */ + if (tmp_hal_status == HAL_OK) + { + /* Set ADC state */ + /* - Clear state bitfield related to injected group conversion results */ + /* - Set state bitfield related to injected operation */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_READY | HAL_ADC_STATE_INJ_EOC, + HAL_ADC_STATE_INJ_BUSY); + + /* Check if a regular conversion is ongoing */ + /* Note: On this device, there is no ADC error code fields related to */ + /* conversions on group injected only. In case of conversion on */ + /* going on group regular, no error code is reset. */ + if (HAL_IS_BIT_CLR(hadc->State, HAL_ADC_STATE_REG_BUSY)) + { + /* Reset ADC all error code fields */ + ADC_CLEAR_ERRORCODE(hadc); + } + + /* Process unlocked */ + /* Unlock before starting ADC conversions: in case of potential */ + /* interruption, to let the process to ADC IRQ Handler. */ + __HAL_UNLOCK(hadc); + + /* Clear injected group conversion flag */ + /* (To ensure of no unknown state from potential previous ADC operations) */ + __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_JEOC); + + /* Enable end of conversion interrupt for injected channels */ + __HAL_ADC_ENABLE_IT(hadc, ADC_IT_JEOC); + + /* Enable conversion of injected group. */ + /* If software start has been selected, conversion starts immediately. */ + /* If external trigger has been selected, conversion will start at next */ + /* trigger event. */ + /* If automatic injected conversion is enabled, conversion will start */ + /* after next regular group conversion. */ + if (ADC_IS_SOFTWARE_START_INJECTED(hadc) && + HAL_IS_BIT_CLR(hadc->Instance->CR1, ADC_CR1_JAUTO) ) + { + /* Enable ADC software conversion for injected channels */ + SET_BIT(hadc->Instance->CR2, ADC_CR2_JSWSTART); + } + } + + /* Return function status */ + return tmp_hal_status; +} + +/** + * @brief Stop conversion of injected channels, disable interruption of + * end-of-conversion. Disable ADC peripheral if no regular conversion + * is on going. + * @note If ADC must be disabled and if conversion is on going on + * regular group, function HAL_ADC_Stop must be used to stop both + * injected and regular groups, and disable the ADC. + * @note If injected group mode auto-injection is enabled, + * function HAL_ADC_Stop must be used. + * @param hadc: ADC handle + * @retval None + */ +HAL_StatusTypeDef HAL_ADCEx_InjectedStop_IT(ADC_HandleTypeDef* hadc) +{ + HAL_StatusTypeDef tmp_hal_status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Process locked */ + __HAL_LOCK(hadc); + + /* Stop potential conversion and disable ADC peripheral */ + /* Conditioned to: */ + /* - No conversion on the other group (regular group) is intended to */ + /* continue (injected and regular groups stop conversion and ADC disable */ + /* are common) */ + /* - In case of auto-injection mode, HAL_ADC_Stop must be used. */ + if(((hadc->State & HAL_ADC_STATE_REG_BUSY) == RESET) && + HAL_IS_BIT_CLR(hadc->Instance->CR1, ADC_CR1_JAUTO) ) + { + /* Stop potential conversion on going, on regular and injected groups */ + /* Disable ADC peripheral */ + tmp_hal_status = ADC_ConversionStop_Disable(hadc); + + /* Check if ADC is effectively disabled */ + if (tmp_hal_status == HAL_OK) + { + /* Disable ADC end of conversion interrupt for injected channels */ + __HAL_ADC_DISABLE_IT(hadc, ADC_IT_JEOC); + + /* Set ADC state */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_REG_BUSY | HAL_ADC_STATE_INJ_BUSY, + HAL_ADC_STATE_READY); + } + } + else + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_CONFIG); + + tmp_hal_status = HAL_ERROR; + } + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + /* Return function status */ + return tmp_hal_status; +} + +/** + * @brief Get ADC injected group conversion result. + * @note Reading register JDRx automatically clears ADC flag JEOC + * (ADC group injected end of unitary conversion). + * @note This function does not clear ADC flag JEOS + * (ADC group injected end of sequence conversion) + * Occurrence of flag JEOS rising: + * - If sequencer is composed of 1 rank, flag JEOS is equivalent + * to flag JEOC. + * - If sequencer is composed of several ranks, during the scan + * sequence flag JEOC only is raised, at the end of the scan sequence + * both flags JEOC and EOS are raised. + * Flag JEOS must not be cleared by this function because + * it would not be compliant with low power features + * (feature low power auto-wait, not available on all STM32 families). + * To clear this flag, either use function: + * in programming model IT: @ref HAL_ADC_IRQHandler(), in programming + * model polling: @ref HAL_ADCEx_InjectedPollForConversion() + * or @ref __HAL_ADC_CLEAR_FLAG(&hadc, ADC_FLAG_JEOS). + * @param hadc: ADC handle + * @param InjectedRank: the converted ADC injected rank. + * This parameter can be one of the following values: + * @arg ADC_INJECTED_RANK_1: Injected Channel1 selected + * @arg ADC_INJECTED_RANK_2: Injected Channel2 selected + * @arg ADC_INJECTED_RANK_3: Injected Channel3 selected + * @arg ADC_INJECTED_RANK_4: Injected Channel4 selected + * @retval ADC group injected conversion data + */ +uint32_t HAL_ADCEx_InjectedGetValue(ADC_HandleTypeDef* hadc, uint32_t InjectedRank) +{ + uint32_t tmp_jdr = 0; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + assert_param(IS_ADC_INJECTED_RANK(InjectedRank)); + + /* Get ADC converted value */ + switch(InjectedRank) + { + case ADC_INJECTED_RANK_4: + tmp_jdr = hadc->Instance->JDR4; + break; + case ADC_INJECTED_RANK_3: + tmp_jdr = hadc->Instance->JDR3; + break; + case ADC_INJECTED_RANK_2: + tmp_jdr = hadc->Instance->JDR2; + break; + case ADC_INJECTED_RANK_1: + default: + tmp_jdr = hadc->Instance->JDR1; + break; + } + + /* Return ADC converted value */ + return tmp_jdr; +} + +/** + * @brief Injected conversion complete callback in non blocking mode + * @param hadc: ADC handle + * @retval None + */ +__weak void HAL_ADCEx_InjectedConvCpltCallback(ADC_HandleTypeDef* hadc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hadc); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_ADCEx_InjectedConvCpltCallback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup ADCEx_Exported_Functions_Group2 ADC Extended Peripheral Control functions + * @brief ADC Extended Peripheral Control functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Configure channels on injected group + +@endverbatim + * @{ + */ + +/** + * @brief Configures the ADC injected group and the selected channel to be + * linked to the injected group. + * @note Possibility to update parameters on the fly: + * This function initializes injected group, following calls to this + * function can be used to reconfigure some parameters of structure + * "ADC_InjectionConfTypeDef" on the fly, without reseting the ADC. + * The setting of these parameters is conditioned to ADC state: + * this function must be called when ADC is not under conversion. + * @param hadc: ADC handle + * @param sConfigInjected: Structure of ADC injected group and ADC channel for + * injected group. + * @retval None + */ +HAL_StatusTypeDef HAL_ADCEx_InjectedConfigChannel(ADC_HandleTypeDef* hadc, ADC_InjectionConfTypeDef* sConfigInjected) +{ + HAL_StatusTypeDef tmp_hal_status = HAL_OK; + __IO uint32_t wait_loop_index = 0; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + assert_param(IS_ADC_CHANNEL(sConfigInjected->InjectedChannel)); + assert_param(IS_ADC_SAMPLE_TIME(sConfigInjected->InjectedSamplingTime)); + assert_param(IS_FUNCTIONAL_STATE(sConfigInjected->AutoInjectedConv)); + assert_param(IS_ADC_EXTTRIGINJEC(sConfigInjected->ExternalTrigInjecConv)); + assert_param(IS_ADC_RANGE(ADC_RESOLUTION_12B, sConfigInjected->InjectedOffset)); + + if(hadc->Init.ScanConvMode != ADC_SCAN_DISABLE) + { + assert_param(IS_ADC_INJECTED_RANK(sConfigInjected->InjectedRank)); + assert_param(IS_ADC_INJECTED_NB_CONV(sConfigInjected->InjectedNbrOfConversion)); + assert_param(IS_FUNCTIONAL_STATE(sConfigInjected->InjectedDiscontinuousConvMode)); + } + + if(sConfigInjected->ExternalTrigInjecConv != ADC_INJECTED_SOFTWARE_START) + { + assert_param(IS_ADC_EXTTRIGINJEC_EDGE(sConfigInjected->ExternalTrigInjecConvEdge)); + } + + /* Process locked */ + __HAL_LOCK(hadc); + + /* Configuration of injected group sequencer: */ + /* - if scan mode is disabled, injected channels sequence length is set to */ + /* 0x00: 1 channel converted (channel on regular rank 1) */ + /* Parameter "InjectedNbrOfConversion" is discarded. */ + /* Note: Scan mode is present by hardware on this device and, if */ + /* disabled, discards automatically nb of conversions. Anyway, nb of */ + /* conversions is forced to 0x00 for alignment over all STM32 devices. */ + /* - if scan mode is enabled, injected channels sequence length is set to */ + /* parameter ""InjectedNbrOfConversion". */ + if (hadc->Init.ScanConvMode == ADC_SCAN_DISABLE) + { + if (sConfigInjected->InjectedRank == ADC_INJECTED_RANK_1) + { + /* Clear the old SQx bits for all injected ranks */ + MODIFY_REG(hadc->Instance->JSQR , + ADC_JSQR_JL | + ADC_JSQR_JSQ4 | + ADC_JSQR_JSQ3 | + ADC_JSQR_JSQ2 | + ADC_JSQR_JSQ1 , + ADC_JSQR_RK_JL(sConfigInjected->InjectedChannel, + ADC_INJECTED_RANK_1, + 0x01) ); + } + /* If another injected rank than rank1 was intended to be set, and could */ + /* not due to ScanConvMode disabled, error is reported. */ + else + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_CONFIG); + + tmp_hal_status = HAL_ERROR; + } + } + else + { + /* Since injected channels rank conv. order depends on total number of */ + /* injected conversions, selected rank must be below or equal to total */ + /* number of injected conversions to be updated. */ + if (sConfigInjected->InjectedRank <= sConfigInjected->InjectedNbrOfConversion) + { + /* Clear the old SQx bits for the selected rank */ + /* Set the SQx bits for the selected rank */ + MODIFY_REG(hadc->Instance->JSQR , + + ADC_JSQR_JL | + ADC_JSQR_RK_JL(ADC_JSQR_JSQ1, + sConfigInjected->InjectedRank, + sConfigInjected->InjectedNbrOfConversion) , + + ADC_JSQR_JL_SHIFT(sConfigInjected->InjectedNbrOfConversion) | + ADC_JSQR_RK_JL(sConfigInjected->InjectedChannel, + sConfigInjected->InjectedRank, + sConfigInjected->InjectedNbrOfConversion) ); + } + else + { + /* Clear the old SQx bits for the selected rank */ + MODIFY_REG(hadc->Instance->JSQR , + + ADC_JSQR_JL | + ADC_JSQR_RK_JL(ADC_JSQR_JSQ1, + sConfigInjected->InjectedRank, + sConfigInjected->InjectedNbrOfConversion) , + + 0x00000000 ); + } + } + + /* Enable external trigger if trigger selection is different of software */ + /* start. */ + /* Note: This configuration keeps the hardware feature of parameter */ + /* ExternalTrigConvEdge "trigger edge none" equivalent to */ + /* software start. */ + + if (sConfigInjected->ExternalTrigInjecConv != ADC_INJECTED_SOFTWARE_START) + { + MODIFY_REG(hadc->Instance->CR2 , + ADC_CR2_JEXTEN | + ADC_CR2_JEXTSEL , + sConfigInjected->ExternalTrigInjecConv | + sConfigInjected->ExternalTrigInjecConvEdge ); + } + else + { + MODIFY_REG(hadc->Instance->CR2, + ADC_CR2_JEXTEN | + ADC_CR2_JEXTSEL , + 0x00000000 ); + } + + /* Configuration of injected group */ + /* Parameters update conditioned to ADC state: */ + /* Parameters that can be updated only when ADC is disabled: */ + /* - Automatic injected conversion */ + /* - Injected discontinuous mode */ + if ((ADC_IS_ENABLE(hadc) == RESET)) + { + hadc->Instance->CR1 &= ~(ADC_CR1_JAUTO | + ADC_CR1_JDISCEN ); + + /* Automatic injected conversion can be enabled if injected group */ + /* external triggers are disabled. */ + if (sConfigInjected->AutoInjectedConv == ENABLE) + { + if (sConfigInjected->ExternalTrigInjecConv == ADC_INJECTED_SOFTWARE_START) + { + SET_BIT(hadc->Instance->CR1, ADC_CR1_JAUTO); + } + else + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_CONFIG); + + tmp_hal_status = HAL_ERROR; + } + } + + /* Injected discontinuous can be enabled only if auto-injected mode is */ + /* disabled. */ + if (sConfigInjected->InjectedDiscontinuousConvMode == ENABLE) + { + if (sConfigInjected->AutoInjectedConv == DISABLE) + { + SET_BIT(hadc->Instance->CR1, ADC_CR1_JDISCEN); + } + else + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_CONFIG); + + tmp_hal_status = HAL_ERROR; + } + } + } + + /* Channel sampling time configuration */ + /* For InjectedChannels 0 to 9 */ + if (sConfigInjected->InjectedChannel < ADC_CHANNEL_10) + { + MODIFY_REG(hadc->Instance->SMPR3, + ADC_SMPR3(ADC_SMPR3_SMP0, sConfigInjected->InjectedChannel), + ADC_SMPR3(sConfigInjected->InjectedSamplingTime, sConfigInjected->InjectedChannel) ); + } + /* For InjectedChannels 10 to 19 */ + else if (sConfigInjected->InjectedChannel < ADC_CHANNEL_20) + { + MODIFY_REG(hadc->Instance->SMPR2, + ADC_SMPR2(ADC_SMPR2_SMP10, sConfigInjected->InjectedChannel), + ADC_SMPR2(sConfigInjected->InjectedSamplingTime, sConfigInjected->InjectedChannel) ); + } + /* For InjectedChannels 20 to 26 for devices Cat.1, Cat.2, Cat.3 */ + /* For InjectedChannels 20 to 29 for devices Cat4, Cat.5 */ + else if (sConfigInjected->InjectedChannel <= ADC_SMPR1_CHANNEL_MAX) + { + MODIFY_REG(hadc->Instance->SMPR1, + ADC_SMPR1(ADC_SMPR1_SMP20, sConfigInjected->InjectedChannel), + ADC_SMPR1(sConfigInjected->InjectedSamplingTime, sConfigInjected->InjectedChannel) ); + } + /* For InjectedChannels 30 to 31 for devices Cat4, Cat.5 */ + else + { + ADC_SMPR0_CHANNEL_SET(hadc, sConfigInjected->InjectedSamplingTime, sConfigInjected->InjectedChannel); + } + + + /* Configure the offset: offset enable/disable, InjectedChannel, offset value */ + switch(sConfigInjected->InjectedRank) + { + case 1: + /* Set injected channel 1 offset */ + MODIFY_REG(hadc->Instance->JOFR1, + ADC_JOFR1_JOFFSET1, + sConfigInjected->InjectedOffset); + break; + case 2: + /* Set injected channel 2 offset */ + MODIFY_REG(hadc->Instance->JOFR2, + ADC_JOFR2_JOFFSET2, + sConfigInjected->InjectedOffset); + break; + case 3: + /* Set injected channel 3 offset */ + MODIFY_REG(hadc->Instance->JOFR3, + ADC_JOFR3_JOFFSET3, + sConfigInjected->InjectedOffset); + break; + case 4: + default: + MODIFY_REG(hadc->Instance->JOFR4, + ADC_JOFR4_JOFFSET4, + sConfigInjected->InjectedOffset); + break; + } + + /* If ADC1 Channel_16 or Channel_17 is selected, enable Temperature sensor */ + /* and VREFINT measurement path. */ + if ((sConfigInjected->InjectedChannel == ADC_CHANNEL_TEMPSENSOR) || + (sConfigInjected->InjectedChannel == ADC_CHANNEL_VREFINT) ) + { + SET_BIT(ADC->CCR, ADC_CCR_TSVREFE); + + if ((sConfigInjected->InjectedChannel == ADC_CHANNEL_TEMPSENSOR)) + { + /* Delay for temperature sensor stabilization time */ + /* Compute number of CPU cycles to wait for */ + wait_loop_index = (ADC_TEMPSENSOR_DELAY_US * (SystemCoreClock / 1000000)); + while(wait_loop_index != 0) + { + wait_loop_index--; + } + } + } + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + /* Return function status */ + return tmp_hal_status; +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_ADC_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_comp.c b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_comp.c new file mode 100755 index 0000000..4ba7181 --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_comp.c @@ -0,0 +1,827 @@ +/** + ****************************************************************************** + * @file stm32l1xx_hal_comp.c + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief COMP HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the COMP peripheral: + * + Initialization and de-initialization functions + * + I/O operation functions + * + Peripheral Control functions + * + Peripheral State functions + * + @verbatim +================================================================================ + ##### COMP Peripheral features ##### +================================================================================ + [..] + The STM32L1xx device family integrates 2 analog comparators COMP1 and + COMP2: + (#) The non inverting input and inverting input can be set to GPIO pins. + HAL COMP driver configures the Routing Interface (RI) to connect the + selected I/O pins to comparator input. + Caution: Comparator COMP1 and ADC cannot be used at the same time as + ADC since they share the ADC switch matrix: COMP1 non-inverting + input is routed through ADC switch matrix. Except if ADC is intended + to measure voltage on COMP1 non-inverting input: it can be performed + on ADC channel VCOMP. + + (#) The COMP output is available using HAL_COMP_GetOutputLevel(). + + (#) The COMP output can be redirected to embedded timers (TIM2, TIM3, + TIM4, TIM10). + COMP output cannot be redirected to any I/O pin. + + (#) The comparators COMP1 and COMP2 can be combined in window mode. + In this mode, COMP2 non inverting input is used as common + non-inverting input. + + (#) The 2 comparators have interrupt capability with wake-up + from Sleep and Stop modes (through the EXTI controller): + (++) COMP1 is internally connected to EXTI Line 21 + (++) COMP2 is internally connected to EXTI Line 22 + + From the corresponding IRQ handler, the right interrupt source can be retrieved with the + macros __HAL_COMP_COMP1_EXTI_GET_FLAG() and __HAL_COMP_COMP2_EXTI_GET_FLAG(). + + (#) The comparators also offer the possibility to output the voltage + reference (VrefInt), used on inverting inputs, on I/O pin through + a buffer. To use it, refer to macro "__HAL_SYSCFG_VREFINT_OUT_ENABLE()". + + ##### How to use this driver ##### +================================================================================ + [..] + This driver provides functions to configure and program the Comparators of all STM32L1xx devices. + + To use the comparator, perform the following steps: + + (#) Initialize the COMP low level resources by implementing the HAL_COMP_MspInit(). + (++) Configure the comparator input I/O pin using HAL_GPIO_Init(): + - For all inputs: I/O pin in analog mode (Schmitt trigger disabled) + - Possible alternate configuration, for non-inverting inputs of comparator 2: I/O pin in floating mode (Schmitt trigger enabled). + It is recommended to use analog configuration to avoid any overconsumption around VDD/2. + (++) Enable COMP Peripheral clock using macro __HAL_RCC_COMP_CLK_ENABLE() + (++) If required enable the COMP interrupt (EXTI line Interrupt): enable + the comparator interrupt vector using HAL_NVIC_EnableIRQ(COMP_IRQn) + and HAL_NVIC_SetPriority(COMP_IRQn, xxx, xxx) functions. + + (#) Configure the comparator using HAL_COMP_Init() function: + (++) Select the inverting input (COMP2 only) + (++) Select the non-inverting input + (++) Select the output redirection to timers (COMP2 only) + (++) Select the speed mode (COMP2 only) + (++) Select the window mode (related to COMP1 and COMP2, but selected + by COMP2 only) + (++) Select the pull-up/down resistors on non-inverting input (COMP1 only) + + (#) Enable the comparator using HAL_COMP_Start() or HAL_COMP_Start_IT() + function + + (#) If needed, use HAL_COMP_GetOutputLevel() or HAL_COMP_TriggerCallback() + functions to manage comparator actions (output level or events) + + (#) Disable the comparator using HAL_COMP_Stop() or HAL_COMP_Stop_IT() + function + + (#) De-initialize the comparator using HAL_COMP_DeInit() function + + + @endverbatim + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* + Additionnal remark: + Table 1. COMP Inputs for the STM32L1xx devices + +----------------------------------------------------------------------+ + | | | COMP1 | COMP2 | + |-----------------|--------------------------------|---------|---------| + | | 1/4 VREFINT | -- | OK | + | | 1/2 VREFINT | -- | OK | + | | 3/4 VREFINT | -- | OK | + | Inverting | VREFINT | OK | OK | + | input | DAC Ch1 OUT (PA4) | -- | OK | + | | DAC Ch2 OUT (PA5) | -- | OK | + | | IO: PB3 | -- | OK | + |-----------------|--------------------------------|---------|---------| + | | IO: | | | + | | PB4, 5, 6*, 7* | --- | OK | + | Non-inverting | PA0*, 1*, 2*, 3*, 4, 5, 6, 7 | OK | --- | + | input | PB0, 1, 12, 13, 14, 15 | OK | --- | + | | PC0, 1, 2, 3, 4, 5 | OK | --- | + | | PE7, 8, 9, 10 | OK | --- | + | | PF6, 7, 8, 9, 10 | OK | --- | + | | OPAMP1 output | OK | --- | + | | OPAMP2 output | OK | --- | + | | OPAMP3 output** | OK | --- | + +----------------------------------------------------------------------+ + *: Available on devices category Cat.3, Cat.4, Cat.5 only. + **: Available on devices category Cat.4 only. + + [..] Table 2. COMP Outputs redirection to embedded timers + +-----------------------------------+ + | COMP1 | COMP2 | + |-----------------|-----------------| + | | TIM2 IC4 | + | | TIM2 OCREF CLR | + | (no redirection | TIM3 IC4 | + | to timers) | TIM3 OCREF CLR | + | | TIM4 IC4 | + | | TIM4 OCREF CLR | + | | TIM10 IC1 | + +-----------------------------------+ +*/ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_hal.h" + +/** @addtogroup STM32L1xx_HAL_Driver + * @{ + */ + +/** @defgroup COMP COMP + * @brief COMP HAL module driver + * @{ + */ + +#ifdef HAL_COMP_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ + +/** @defgroup COMP_Private_Constants COMP Private Constants + * @{ + */ + /* Delay for COMP start-up time. */ + /* Maximum delay is 10us for comparator 1 and 25us for comparator 2 in slow */ + /* mode (refer to device datasheet, parameter tSTART). */ + /* Delay in CPU cycles, fixed to worst case: maximum CPU frequency 32MHz to */ + /* have the minimum number of CPU cycles to fulfill this delay. */ + /* - Comparator 1: delay minimum of 320 CPU cycles. Wait loop takes 3 CPU */ + /* cycles per iteration, therefore total wait iterations */ + /* number must be initialized at 106 iterations. */ + /* - Comparator 2: delay minimum of 800 CPU cycles. Wait loop takes 3 CPU */ + /* cycles per iteration, therefore total wait iterations */ + /* number must be initialized at 266 iterations. */ +#define COMP1_START_DELAY_CPU_CYCLES ((uint32_t)106) +#define COMP2_START_DELAY_CPU_CYCLES ((uint32_t)266) + + /* Comparator status "locked": to update COMP handle state (software lock */ + /* only on COMP of STM32L1xx devices) by bitfield: */ + /* states HAL_COMP_STATE_READY_LOCKED, HAL_COMP_STATE_BUSY_LOCKED. */ +#define COMP_STATE_BIT_LOCK ((uint32_t) 0x00000010) + +/** + * @} + */ + + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup COMP_Exported_Functions COMP Exported Functions + * @{ + */ + +/** @defgroup COMP_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] This section provides functions to initialize and de-initialize comparators + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the COMP according to the specified + * parameters in the COMP_InitTypeDef and create the associated handle. + * @note If the selected comparator is locked, initialization can't be performed. + * To unlock the configuration, perform a system reset. + * @param hcomp: COMP handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_COMP_Init(COMP_HandleTypeDef *hcomp) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the COMP handle allocation and lock status */ + if((hcomp == NULL) || ((hcomp->State & COMP_STATE_BIT_LOCK) != RESET)) + { + status = HAL_ERROR; + } + else + { + /* Check the parameter */ + assert_param(IS_COMP_ALL_INSTANCE(hcomp->Instance)); + + if (hcomp->Instance == COMP1) + { + assert_param(IS_COMP_NONINVERTINGINPUTPULL(hcomp->Init.NonInvertingInputPull)); + } + else /* if (hcomp->Instance == COMP2) */ + { + assert_param(IS_COMP_INVERTINGINPUT(hcomp->Init.InvertingInput)); + assert_param(IS_COMP_OUTPUT(hcomp->Init.Output)); + assert_param(IS_COMP_MODE(hcomp->Init.Mode)); + assert_param(IS_COMP_WINDOWMODE(hcomp->Init.WindowMode)); + } + + /* In window mode, non-inverting inputs of the 2 comparators are */ + /* connected together and are using inputs of COMP2 only. If COMP1 is */ + /* selected, this parameter is discarded. */ + if ((hcomp->Init.WindowMode == COMP_WINDOWMODE_DISABLE) || + (hcomp->Instance == COMP2) ) + { + assert_param(IS_COMP_NONINVERTINGINPUT(hcomp->Init.NonInvertingInput)); + } + + + /* Enable SYSCFG clock and the low level hardware to access comparators */ + if(hcomp->State == HAL_COMP_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hcomp->Lock = HAL_UNLOCKED; + + /* Enable SYSCFG clock to control the routing Interface (RI) */ + __HAL_RCC_SYSCFG_CLK_ENABLE(); + + /* Init the low level hardware */ + HAL_COMP_MspInit(hcomp); + } + + /* Configuration of comparator: */ + /* - Output selection */ + /* - Inverting input selection */ + /* - Window mode */ + /* - Mode fast/slow speed */ + /* - Inverting input pull-up/down resistors */ + + /* Configuration depending on comparator instance */ + if (hcomp->Instance == COMP1) + { + MODIFY_REG(COMP->CSR, COMP_CSR_400KPD | COMP_CSR_10KPD | COMP_CSR_400KPU | COMP_CSR_10KPU, + hcomp->Init.NonInvertingInputPull ); + } + else /* if (hcomp->Instance == COMP2) */ + { + /* Note: If comparator 2 is not enabled, inverting input (parameter */ + /* "hcomp->Init.InvertingInput") is configured into function */ + /* "HAL_COMP_Start()" since inverting input selection also */ + /* enables the comparator 2. */ + /* If comparator 2 is already enabled, inverting input is */ + /* reconfigured on the fly. */ + if (__COMP_IS_ENABLED(hcomp) == RESET) + { + MODIFY_REG(COMP->CSR, COMP_CSR_OUTSEL | + COMP_CSR_WNDWE | + COMP_CSR_SPEED , + hcomp->Init.Output | + hcomp->Init.WindowMode | + hcomp->Init.Mode ); + } + else + { + MODIFY_REG(COMP->CSR, COMP_CSR_OUTSEL | + COMP_CSR_INSEL | + COMP_CSR_WNDWE | + COMP_CSR_SPEED , + hcomp->Init.Output | + hcomp->Init.InvertingInput | + hcomp->Init.WindowMode | + hcomp->Init.Mode ); + } + } + + /* Configure Routing Interface (RI) switches for comparator non-inverting */ + /* input. */ + /* Except in 2 cases: */ + /* - if non-inverting input has no selection: it can be the case for */ + /* COMP1 in window mode. */ + /* - particular case for PC3: if switch COMP1_SW1 is closed */ + /* (by macro "__HAL_OPAMP_OPAMP3OUT_CONNECT_ADC_COMP1()" or */ + /* "__HAL_RI_SWITCH_COMP1_SW1_CLOSE()"), connection between pin PC3 */ + /* (or OPAMP3, if available) and COMP1 is done directly, without going */ + /* through ADC switch matrix. */ + if (__COMP_ROUTING_INTERFACE_TOBECONFIGURED(hcomp)) + { + if (hcomp->Instance == COMP1) + { + /* Enable the switch control mode */ + __HAL_RI_SWITCHCONTROLMODE_ENABLE(); + + /* Close the analog switch of ADC switch matrix to COMP1 (ADC */ + /* channel 26: Vcomp) */ + __HAL_RI_IOSWITCH_CLOSE(RI_IOSWITCH_VCOMP); + } + + /* Close the I/O analog switch corresponding to comparator */ + /* non-inverting input selected. */ + __HAL_RI_IOSWITCH_CLOSE(hcomp->Init.NonInvertingInput); + } + + + /* Initialize the COMP state*/ + if(hcomp->State == HAL_COMP_STATE_RESET) + { + hcomp->State = HAL_COMP_STATE_READY; + } + } + + return status; +} + + +/** + * @brief DeInitializes the COMP peripheral + * @note Deinitialization can't be performed if the COMP configuration is locked. + * To unlock the configuration, perform a system reset. + * @param hcomp: COMP handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_COMP_DeInit(COMP_HandleTypeDef *hcomp) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the COMP handle allocation and lock status */ + if((hcomp == NULL) || ((hcomp->State & COMP_STATE_BIT_LOCK) != RESET)) + { + status = HAL_ERROR; + } + else + { + /* Check the parameter */ + assert_param(IS_COMP_ALL_INSTANCE(hcomp->Instance)); + + /* Reset configuration depending on comparator instance */ + if (hcomp->Instance == COMP1) + { + CLEAR_BIT(COMP->CSR , COMP_CSR_400KPD | COMP_CSR_10KPD | COMP_CSR_400KPU | COMP_CSR_10KPU); + } + else /* if (hcomp->Instance == COMP2) */ + { + CLEAR_BIT(COMP->CSR , COMP_CSR_OUTSEL | + COMP_CSR_WNDWE | + COMP_CSR_INSEL | + COMP_CSR_SPEED ); + } + + + /* Restore default state of Routing Interface (RI) switches for */ + /* comparator non-inverting input. */ + if (hcomp->Init.NonInvertingInput != COMP_NONINVERTINGINPUT_NONE) + { + /* Open the I/O analog switch corresponding to comparator */ + /* non-inverting input selected. */ + __HAL_RI_IOSWITCH_OPEN(hcomp->Init.NonInvertingInput); + } + if (hcomp->Instance == COMP1) + { + /* Open the analog switch of ADC switch matrix to COMP1 (ADC */ + /* channel 26: Vcomp) */ + __HAL_RI_IOSWITCH_OPEN(RI_IOSWITCH_VCOMP); + + /* Disable the switch control mode */ + __HAL_RI_SWITCHCONTROLMODE_DISABLE(); + } + + + /* DeInit the low level hardware: SYSCFG, GPIO, CLOCK and NVIC */ + HAL_COMP_MspDeInit(hcomp); + + hcomp->State = HAL_COMP_STATE_RESET; + + /* Process unlocked */ + __HAL_UNLOCK(hcomp); + } + + return status; +} + +/** + * @brief Initializes the COMP MSP. + * @param hcomp: COMP handle + * @retval None + */ +__weak void HAL_COMP_MspInit(COMP_HandleTypeDef *hcomp) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hcomp); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_COMP_MspInit could be implenetd in the user file + */ +} + +/** + * @brief DeInitializes COMP MSP. + * @param hcomp: COMP handle + * @retval None + */ +__weak void HAL_COMP_MspDeInit(COMP_HandleTypeDef *hcomp) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hcomp); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_COMP_MspDeInit could be implenetd in the user file + */ +} + +/** + * @} + */ + +/** @defgroup COMP_Exported_Functions_Group2 I/O operation functions + * @brief I/O operation functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to manage the COMP + start and stop actions with or without interruption on ExtI line. + +@endverbatim + * @{ + */ + +/** + * @brief Start the comparator + * @param hcomp: COMP handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_COMP_Start(COMP_HandleTypeDef *hcomp) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t wait_loop_cycles = 0; + __IO uint32_t wait_loop_index = 0; + + /* Check the COMP handle allocation and lock status */ + if((hcomp == NULL) || ((hcomp->State & COMP_STATE_BIT_LOCK) != RESET)) + { + status = HAL_ERROR; + } + else + { + /* Check the parameter */ + assert_param(IS_COMP_ALL_INSTANCE(hcomp->Instance)); + + if(hcomp->State == HAL_COMP_STATE_READY) + { + + /* Note: For comparator 2, inverting input (parameter */ + /* "hcomp->Init.InvertingInput") is configured into this */ + /* function instead of function "HAL_COMP_Init()" since */ + /* inverting input selection also enables the comparator 2. */ + __HAL_COMP_ENABLE(hcomp); + + /* Set delay for COMP start-up time */ + if (hcomp->Instance == COMP1) + { + wait_loop_cycles = COMP1_START_DELAY_CPU_CYCLES; + } + else /* if (hcomp->Instance == COMP2) */ + { + wait_loop_cycles = COMP2_START_DELAY_CPU_CYCLES; + } + + /* Delay for COMP start-up time. */ + /* Delay fixed to worst case: maximum CPU frequency */ + while(wait_loop_index < wait_loop_cycles) + { + wait_loop_index++; + } + + /* Update COMP state */ + hcomp->State = HAL_COMP_STATE_BUSY; + + } + else + { + status = HAL_ERROR; + } + } + + return status; +} + +/** + * @brief Stop the comparator + * @param hcomp: COMP handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_COMP_Stop(COMP_HandleTypeDef *hcomp) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the COMP handle allocation and lock status */ + if((hcomp == NULL) || ((hcomp->State & COMP_STATE_BIT_LOCK) != RESET)) + { + status = HAL_ERROR; + } + else + { + /* Check the parameter */ + assert_param(IS_COMP_ALL_INSTANCE(hcomp->Instance)); + + if(hcomp->State == HAL_COMP_STATE_BUSY) + { + /* Disable the selected comparator */ + __HAL_COMP_DISABLE(hcomp); + + /* Update COMP state */ + hcomp->State = HAL_COMP_STATE_READY; + } + else + { + status = HAL_ERROR; + } + } + + return status; +} + +/** + * @brief Enables the interrupt and starts the comparator + * @param hcomp: COMP handle + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_COMP_Start_IT(COMP_HandleTypeDef *hcomp) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t extiline = 0; + + status = HAL_COMP_Start(hcomp); + if(status == HAL_OK) + { + /* Check the parameter */ + assert_param(IS_COMP_TRIGGERMODE(hcomp->Init.TriggerMode)); + + /* Get the Exti Line output configuration */ + extiline = COMP_GET_EXTI_LINE(hcomp->Instance); + + /* Configure the trigger rising edge */ + if((hcomp->Init.TriggerMode & COMP_TRIGGERMODE_IT_RISING) != RESET) + { + SET_BIT(EXTI->RTSR, extiline); + } + else + { + CLEAR_BIT(EXTI->RTSR, extiline); + } + + /* Configure the trigger falling edge */ + if((hcomp->Init.TriggerMode & COMP_TRIGGERMODE_IT_FALLING) != RESET) + { + SET_BIT(EXTI->FTSR, extiline); + } + else + { + CLEAR_BIT(EXTI->FTSR, extiline); + } + + /* Clear COMP EXTI pending bit */ + WRITE_REG(EXTI->PR, extiline); + + /* Enable EXTI interrupt mode */ + SET_BIT(EXTI->IMR, extiline); + + } + + return status; +} + +/** + * @brief Disable the interrupt and Stop the comparator + * @param hcomp: COMP handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_COMP_Stop_IT(COMP_HandleTypeDef *hcomp) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Disable the EXTI Line interrupt mode */ + CLEAR_BIT(EXTI->IMR, COMP_GET_EXTI_LINE(hcomp->Instance)); + + status = HAL_COMP_Stop(hcomp); + + return status; +} + +/** + * @brief Comparator IRQ Handler + * @param hcomp: COMP handle + * @retval HAL status + */ +void HAL_COMP_IRQHandler(COMP_HandleTypeDef *hcomp) +{ + uint32_t extiline = COMP_GET_EXTI_LINE(hcomp->Instance); + + /* Check COMP Exti flag */ + if(READ_BIT(EXTI->PR, extiline) != RESET) + { + /* Clear COMP EXTI pending bit */ + WRITE_REG(EXTI->PR, extiline); + + /* COMP trigger user callback */ + HAL_COMP_TriggerCallback(hcomp); + } +} + +/** + * @} + */ + +/** @defgroup COMP_Exported_Functions_Group3 Peripheral Control functions + * @brief Peripheral Control functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the COMP + management functions: Lock status, comparator output level check, IRQ + callback (in case of usage of comparator with interruption on ExtI line). + +@endverbatim + * @{ + */ + +/** + * @brief Lock the selected comparator configuration. + * Caution: On STM32L1, HAL COMP lock is software lock only (not + * hardware lock as on some other STM32 devices) + * @param hcomp: COMP handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_COMP_Lock(COMP_HandleTypeDef *hcomp) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the COMP handle allocation and lock status */ + if((hcomp == NULL) || ((hcomp->State & COMP_STATE_BIT_LOCK) != RESET)) + { + status = HAL_ERROR; + } + else + { + /* Check the parameter */ + assert_param(IS_COMP_ALL_INSTANCE(hcomp->Instance)); + + /* Set lock flag on state */ + switch(hcomp->State) + { + case HAL_COMP_STATE_BUSY: + hcomp->State = HAL_COMP_STATE_BUSY_LOCKED; + break; + case HAL_COMP_STATE_READY: + hcomp->State = HAL_COMP_STATE_READY_LOCKED; + break; + default: + /* unexpected state */ + status = HAL_ERROR; + break; + } + } + + return status; +} + +/** + * @brief Return the output level (high or low) of the selected comparator. + * The output level depends on the selected polarity. + * - Comparator output is low when the non-inverting input is at a lower + * voltage than the inverting input + * - Comparator output is high when the non-inverting input is at a higher + * voltage than the inverting input + * @param hcomp: COMP handle + * @retval Returns the selected comparator output level: COMP_OUTPUTLEVEL_LOW or COMP_OUTPUTLEVEL_HIGH. + * + */ +uint32_t HAL_COMP_GetOutputLevel(COMP_HandleTypeDef *hcomp) +{ + uint32_t level = 0; + + /* Check the parameter */ + assert_param(IS_COMP_ALL_INSTANCE(hcomp->Instance)); + + /* Read output level of the selected comparator */ + if(READ_BIT(COMP->CSR, __COMP_CSR_CMPXOUT(hcomp)) == RESET) + { + level = COMP_OUTPUTLEVEL_LOW; + } + else + { + level = COMP_OUTPUTLEVEL_HIGH; + } + + return(level); +} + +/** + * @brief Comparator callback. + * @param hcomp: COMP handle + * @retval None + */ +__weak void HAL_COMP_TriggerCallback(COMP_HandleTypeDef *hcomp) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hcomp); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_COMP_TriggerCallback should be implemented in the user file + */ +} + + +/** + * @} + */ + +/** @defgroup COMP_Exported_Functions_Group4 Peripheral State functions + * @brief Peripheral State functions + * +@verbatim + =============================================================================== + ##### Peripheral State functions ##### + =============================================================================== + [..] + This subsection permit to get in run-time the status of the peripheral. + +@endverbatim + * @{ + */ + +/** + * @brief Return the COMP state + * @param hcomp : COMP handle + * @retval HAL state + */ +HAL_COMP_StateTypeDef HAL_COMP_GetState(COMP_HandleTypeDef *hcomp) +{ + /* Check the COMP handle allocation */ + if(hcomp == NULL) + { + return HAL_COMP_STATE_RESET; + } + + /* Check the parameter */ + assert_param(IS_COMP_ALL_INSTANCE(hcomp->Instance)); + + return hcomp->State; +} +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_COMP_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_cortex.c b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_cortex.c new file mode 100755 index 0000000..57eed33 --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_cortex.c @@ -0,0 +1,494 @@ +/** + ****************************************************************************** + * @file stm32l1xx_hal_cortex.c + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief CORTEX HAL module driver. + * + * This file provides firmware functions to manage the following + * functionalities of the CORTEX: + * + Initialization and de-initialization functions + * + Peripheral Control functions + * + * @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + + [..] + *** How to configure Interrupts using Cortex HAL driver *** + =========================================================== + [..] + This section provide functions allowing to configure the NVIC interrupts (IRQ). + The Cortex-M3 exceptions are managed by CMSIS functions. + + (#) Configure the NVIC Priority Grouping using HAL_NVIC_SetPriorityGrouping() + function according to the following table. + + The table below gives the allowed values of the pre-emption priority and subpriority according + to the Priority Grouping configuration performed by HAL_NVIC_SetPriorityGrouping() function. + ========================================================================================================================== + NVIC_PriorityGroup | NVIC_IRQChannelPreemptionPriority | NVIC_IRQChannelSubPriority | Description + ========================================================================================================================== + NVIC_PRIORITYGROUP_0 | 0 | 0-15 | 0 bits for pre-emption priority + | | | 4 bits for subpriority + -------------------------------------------------------------------------------------------------------------------------- + NVIC_PRIORITYGROUP_1 | 0-1 | 0-7 | 1 bits for pre-emption priority + | | | 3 bits for subpriority + -------------------------------------------------------------------------------------------------------------------------- + NVIC_PRIORITYGROUP_2 | 0-3 | 0-3 | 2 bits for pre-emption priority + | | | 2 bits for subpriority + -------------------------------------------------------------------------------------------------------------------------- + NVIC_PRIORITYGROUP_3 | 0-7 | 0-1 | 3 bits for pre-emption priority + | | | 1 bits for subpriority + -------------------------------------------------------------------------------------------------------------------------- + NVIC_PRIORITYGROUP_4 | 0-15 | 0 | 4 bits for pre-emption priority + | | | 0 bits for subpriority + ========================================================================================================================== + (#) Configure the priority of the selected IRQ Channels using HAL_NVIC_SetPriority() + + (#) Enable the selected IRQ Channels using HAL_NVIC_EnableIRQ() + + + -@- When the NVIC_PRIORITYGROUP_0 is selected, IRQ pre-emption is no more possible. + The pending IRQ priority will be managed only by the sub priority. + + -@- IRQ priority order (sorted by highest to lowest priority): + (+@) Lowest pre-emption priority + (+@) Lowest sub priority + (+@) Lowest hardware priority (IRQ number) + + [..] + *** How to configure Systick using Cortex HAL driver *** + ======================================================== + [..] + Setup SysTick Timer for 1 msec interrupts. + + (+) The HAL_SYSTICK_Config()function calls the SysTick_Config() function which + is a CMSIS function that: + (++) Configures the SysTick Reload register with value passed as function parameter. + (++) Configures the SysTick IRQ priority to the lowest value (0x0F). + (++) Resets the SysTick Counter register. + (++) Configures the SysTick Counter clock source to be Core Clock Source (HCLK). + (++) Enables the SysTick Interrupt. + (++) Starts the SysTick Counter. + + (+) You can change the SysTick Clock source to be HCLK_Div8 by calling the macro + __HAL_CORTEX_SYSTICKCLK_CONFIG(SYSTICK_CLKSOURCE_HCLK_DIV8) just after the + HAL_SYSTICK_Config() function call. The __HAL_CORTEX_SYSTICKCLK_CONFIG() macro is defined + inside the stm32l1xx_hal_cortex.h file. + + (+) You can change the SysTick IRQ priority by calling the + HAL_NVIC_SetPriority(SysTick_IRQn,...) function just after the HAL_SYSTICK_Config() function + call. The HAL_NVIC_SetPriority() call the NVIC_SetPriority() function which is a CMSIS function. + + (+) To adjust the SysTick time base, use the following formula: + + Reload Value = SysTick Counter Clock (Hz) x Desired Time base (s) + (++) Reload Value is the parameter to be passed for HAL_SYSTICK_Config() function + (++) Reload Value should not exceed 0xFFFFFF + + @endverbatim + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_hal.h" + +/** @addtogroup STM32L1xx_HAL_Driver + * @{ + */ + +/** @defgroup CORTEX CORTEX + * @brief CORTEX HAL module driver + * @{ + */ + +#ifdef HAL_CORTEX_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup CORTEX_Exported_Functions CORTEX Exported Functions + * @{ + */ + + +/** @defgroup CORTEX_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + ============================================================================== + ##### Initialization and de-initialization functions ##### + ============================================================================== + [..] + This section provide the Cortex HAL driver functions allowing to configure Interrupts + Systick functionalities + +@endverbatim + * @{ + */ + + +/** + * @brief Sets the priority grouping field (pre-emption priority and subpriority) + * using the required unlock sequence. + * @param PriorityGroup: The priority grouping bits length. + * This parameter can be one of the following values: + * @arg NVIC_PRIORITYGROUP_0: 0 bits for pre-emption priority + * 4 bits for subpriority + * @arg NVIC_PRIORITYGROUP_1: 1 bits for pre-emption priority + * 3 bits for subpriority + * @arg NVIC_PRIORITYGROUP_2: 2 bits for pre-emption priority + * 2 bits for subpriority + * @arg NVIC_PRIORITYGROUP_3: 3 bits for pre-emption priority + * 1 bits for subpriority + * @arg NVIC_PRIORITYGROUP_4: 4 bits for pre-emption priority + * 0 bits for subpriority + * @note When the NVIC_PriorityGroup_0 is selected, IRQ pre-emption is no more possible. + * The pending IRQ priority will be managed only by the subpriority. + * @retval None + */ +void HAL_NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + /* Check the parameters */ + assert_param(IS_NVIC_PRIORITY_GROUP(PriorityGroup)); + + /* Set the PRIGROUP[10:8] bits according to the PriorityGroup parameter value */ + NVIC_SetPriorityGrouping(PriorityGroup); +} + +/** + * @brief Sets the priority of an interrupt. + * @param IRQn: External interrupt number + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32l1xx.h)) + * @param PreemptPriority: The pre-emption priority for the IRQn channel. + * This parameter can be a value between 0 and 15 + * A lower priority value indicates a higher priority + * @param SubPriority: the subpriority level for the IRQ channel. + * This parameter can be a value between 0 and 15 + * A lower priority value indicates a higher priority. + * @retval None + */ +void HAL_NVIC_SetPriority(IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t prioritygroup = 0x00; + + /* Check the parameters */ + assert_param(IS_NVIC_SUB_PRIORITY(SubPriority)); + assert_param(IS_NVIC_PREEMPTION_PRIORITY(PreemptPriority)); + + prioritygroup = NVIC_GetPriorityGrouping(); + + NVIC_SetPriority(IRQn, NVIC_EncodePriority(prioritygroup, PreemptPriority, SubPriority)); +} + +/** + * @brief Enables a device specific interrupt in the NVIC interrupt controller. + * @note To configure interrupts priority correctly, the NVIC_PriorityGroupConfig() + * function should be called before. + * @param IRQn External interrupt number + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32l1xx.h)) + * @retval None + */ +void HAL_NVIC_EnableIRQ(IRQn_Type IRQn) +{ + /* Check the parameters */ + assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); + + /* Enable interrupt */ + NVIC_EnableIRQ(IRQn); +} + +/** + * @brief Disables a device specific interrupt in the NVIC interrupt controller. + * @param IRQn External interrupt number + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32l1xxxx.h)) + * @retval None + */ +void HAL_NVIC_DisableIRQ(IRQn_Type IRQn) +{ + /* Check the parameters */ + assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); + + /* Disable interrupt */ + NVIC_DisableIRQ(IRQn); +} + +/** + * @brief Initiates a system reset request to reset the MCU. + * @retval None + */ +void HAL_NVIC_SystemReset(void) +{ + /* System Reset */ + NVIC_SystemReset(); +} + +/** + * @brief Initializes the System Timer and its interrupt, and starts the System Tick Timer. + * Counter is in free running mode to generate periodic interrupts. + * @param TicksNumb: Specifies the ticks Number of ticks between two interrupts. + * @retval status: - 0 Function succeeded. + * - 1 Function failed. + */ +uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb) +{ + return SysTick_Config(TicksNumb); +} +/** + * @} + */ + +/** @defgroup CORTEX_Exported_Functions_Group2 Peripheral Control functions + * @brief Cortex control functions + * +@verbatim + ============================================================================== + ##### Peripheral Control functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to control the CORTEX + (NVIC, SYSTICK, MPU) functionalities. + + +@endverbatim + * @{ + */ + +#if (__MPU_PRESENT == 1) +/** + * @brief Initializes and configures the Region and the memory to be protected. + * @param MPU_Init: Pointer to a MPU_Region_InitTypeDef structure that contains + * the initialization and configuration information. + * @retval None + */ +void HAL_MPU_ConfigRegion(MPU_Region_InitTypeDef *MPU_Init) +{ + /* Check the parameters */ + assert_param(IS_MPU_REGION_NUMBER(MPU_Init->Number)); + assert_param(IS_MPU_REGION_ENABLE(MPU_Init->Enable)); + + /* Set the Region number */ + MPU->RNR = MPU_Init->Number; + + if ((MPU_Init->Enable) != RESET) + { + /* Check the parameters */ + assert_param(IS_MPU_INSTRUCTION_ACCESS(MPU_Init->DisableExec)); + assert_param(IS_MPU_REGION_PERMISSION_ATTRIBUTE(MPU_Init->AccessPermission)); + assert_param(IS_MPU_TEX_LEVEL(MPU_Init->TypeExtField)); + assert_param(IS_MPU_ACCESS_SHAREABLE(MPU_Init->IsShareable)); + assert_param(IS_MPU_ACCESS_CACHEABLE(MPU_Init->IsCacheable)); + assert_param(IS_MPU_ACCESS_BUFFERABLE(MPU_Init->IsBufferable)); + assert_param(IS_MPU_SUB_REGION_DISABLE(MPU_Init->SubRegionDisable)); + assert_param(IS_MPU_REGION_SIZE(MPU_Init->Size)); + + MPU->RBAR = MPU_Init->BaseAddress; + MPU->RASR = ((uint32_t)MPU_Init->DisableExec << MPU_RASR_XN_Pos) | + ((uint32_t)MPU_Init->AccessPermission << MPU_RASR_AP_Pos) | + ((uint32_t)MPU_Init->TypeExtField << MPU_RASR_TEX_Pos) | + ((uint32_t)MPU_Init->IsShareable << MPU_RASR_S_Pos) | + ((uint32_t)MPU_Init->IsCacheable << MPU_RASR_C_Pos) | + ((uint32_t)MPU_Init->IsBufferable << MPU_RASR_B_Pos) | + ((uint32_t)MPU_Init->SubRegionDisable << MPU_RASR_SRD_Pos) | + ((uint32_t)MPU_Init->Size << MPU_RASR_SIZE_Pos) | + ((uint32_t)MPU_Init->Enable << MPU_RASR_ENABLE_Pos); + } + else + { + MPU->RBAR = 0x00; + MPU->RASR = 0x00; + } +} +#endif /* __MPU_PRESENT */ + +/** + * @brief Gets the priority grouping field from the NVIC Interrupt Controller. + * @retval Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field) + */ +uint32_t HAL_NVIC_GetPriorityGrouping(void) +{ + /* Get the PRIGROUP[10:8] field value */ + return NVIC_GetPriorityGrouping(); +} + +/** + * @brief Gets the priority of an interrupt. + * @param IRQn: External interrupt number + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32l1xxxx.h)) + * @param PriorityGroup: the priority grouping bits length. + * This parameter can be one of the following values: + * @arg NVIC_PRIORITYGROUP_0: 0 bits for pre-emption priority + * 4 bits for subpriority + * @arg NVIC_PRIORITYGROUP_1: 1 bits for pre-emption priority + * 3 bits for subpriority + * @arg NVIC_PRIORITYGROUP_2: 2 bits for pre-emption priority + * 2 bits for subpriority + * @arg NVIC_PRIORITYGROUP_3: 3 bits for pre-emption priority + * 1 bits for subpriority + * @arg NVIC_PRIORITYGROUP_4: 4 bits for pre-emption priority + * 0 bits for subpriority + * @param pPreemptPriority: Pointer on the Preemptive priority value (starting from 0). + * @param pSubPriority: Pointer on the Subpriority value (starting from 0). + * @retval None + */ +void HAL_NVIC_GetPriority(IRQn_Type IRQn, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority) +{ + /* Check the parameters */ + assert_param(IS_NVIC_PRIORITY_GROUP(PriorityGroup)); + /* Get priority for Cortex-M system or device specific interrupts */ + NVIC_DecodePriority(NVIC_GetPriority(IRQn), PriorityGroup, pPreemptPriority, pSubPriority); +} + +/** + * @brief Sets Pending bit of an external interrupt. + * @param IRQn External interrupt number + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32l1xxxx.h)) + * @retval None + */ +void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + /* Set interrupt pending */ + NVIC_SetPendingIRQ(IRQn); +} + +/** + * @brief Gets Pending Interrupt (reads the pending register in the NVIC + * and returns the pending bit for the specified interrupt). + * @param IRQn External interrupt number + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32l1xxxx.h)) + * @retval status: - 0 Interrupt status is not pending. + * - 1 Interrupt status is pending. + */ +uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + /* Return 1 if pending else 0 */ + return NVIC_GetPendingIRQ(IRQn); +} + +/** + * @brief Clears the pending bit of an external interrupt. + * @param IRQn External interrupt number + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32l1xxxx.h)) + * @retval None + */ +void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + /* Clear pending interrupt */ + NVIC_ClearPendingIRQ(IRQn); +} + +/** + * @brief Gets active interrupt ( reads the active register in NVIC and returns the active bit). + * @param IRQn External interrupt number + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32l1xxxx.h)) + * @retval status: - 0 Interrupt status is not pending. + * - 1 Interrupt status is pending. + */ +uint32_t HAL_NVIC_GetActive(IRQn_Type IRQn) +{ + /* Return 1 if active else 0 */ + return NVIC_GetActive(IRQn); +} + +/** + * @brief Configures the SysTick clock source. + * @param CLKSource: specifies the SysTick clock source. + * This parameter can be one of the following values: + * @arg SYSTICK_CLKSOURCE_HCLK_DIV8: AHB clock divided by 8 selected as SysTick clock source. + * @arg SYSTICK_CLKSOURCE_HCLK: AHB clock selected as SysTick clock source. + * @retval None + */ +void HAL_SYSTICK_CLKSourceConfig(uint32_t CLKSource) +{ + /* Check the parameters */ + assert_param(IS_SYSTICK_CLK_SOURCE(CLKSource)); + if (CLKSource == SYSTICK_CLKSOURCE_HCLK) + { + SysTick->CTRL |= SYSTICK_CLKSOURCE_HCLK; + } + else + { + SysTick->CTRL &= ~SYSTICK_CLKSOURCE_HCLK; + } +} + +/** + * @brief This function handles SYSTICK interrupt request. + * @retval None + */ +void HAL_SYSTICK_IRQHandler(void) +{ + HAL_SYSTICK_Callback(); +} + +/** + * @brief SYSTICK callback. + * @retval None + */ +__weak void HAL_SYSTICK_Callback(void) +{ + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_SYSTICK_Callback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_CORTEX_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_crc.c b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_crc.c new file mode 100755 index 0000000..2857230 --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_crc.c @@ -0,0 +1,351 @@ +/** + ****************************************************************************** + * @file stm32l1xx_hal_crc.c + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief CRC HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Cyclic Redundancy Check (CRC) peripheral: + * + Initialization and de-initialization functions + * + Peripheral Control functions + * + Peripheral State functions + * + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The CRC HAL driver can be used as follows: + + (#) Enable CRC AHB clock using __HAL_RCC_CRC_CLK_ENABLE(); + + (#) Use HAL_CRC_Accumulate() function to compute the CRC value of + a 32-bit data buffer using combination of the previous CRC value + and the new one. + + (#) Use HAL_CRC_Calculate() function to compute the CRC Value of + a new 32-bit data buffer. This function resets the CRC computation + unit before starting the computation to avoid getting wrong CRC values. + + @endverbatim + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_hal.h" + +/** @addtogroup STM32L1xx_HAL_Driver + * @{ + */ + +/** @defgroup CRC CRC + * @brief CRC HAL module driver. + * @{ + */ + +#ifdef HAL_CRC_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup CRC_Exported_Functions CRC Exported Functions + * @{ + */ + +/** @defgroup CRC_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions. + * +@verbatim + ============================================================================== + ##### Initialization and de-initialization functions ##### + ============================================================================== + [..] This section provides functions allowing to: + (+) Initialize the CRC according to the specified parameters + in the CRC_InitTypeDef and create the associated handle + (+) DeInitialize the CRC peripheral + (+) Initialize the CRC MSP + (+) DeInitialize CRC MSP + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the CRC according to the specified + * parameters in the CRC_InitTypeDef and creates the associated handle. + * @param hcrc: pointer to a CRC_HandleTypeDef structure that contains + * the configuration information for CRC + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRC_Init(CRC_HandleTypeDef *hcrc) +{ + /* Check the CRC handle allocation */ + if(hcrc == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_CRC_ALL_INSTANCE(hcrc->Instance)); + + if(hcrc->State == HAL_CRC_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hcrc->Lock = HAL_UNLOCKED; + + /* Init the low level hardware */ + HAL_CRC_MspInit(hcrc); + } + + /* Change CRC peripheral state */ + hcrc->State = HAL_CRC_STATE_BUSY; + + /* Change CRC peripheral state */ + hcrc->State = HAL_CRC_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief DeInitializes the CRC peripheral. + * @param hcrc: pointer to a CRC_HandleTypeDef structure that contains + * the configuration information for CRC + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRC_DeInit(CRC_HandleTypeDef *hcrc) +{ + /* Check the CRC handle allocation */ + if(hcrc == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_CRC_ALL_INSTANCE(hcrc->Instance)); + + /* Change CRC peripheral state */ + hcrc->State = HAL_CRC_STATE_BUSY; + + /* Reset IDR register content */ + CLEAR_BIT(hcrc->Instance->IDR, CRC_IDR_IDR) ; + + /* DeInit the low level hardware */ + HAL_CRC_MspDeInit(hcrc); + + /* Change CRC peripheral state */ + hcrc->State = HAL_CRC_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(hcrc); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Initializes the CRC MSP. + * @param hcrc: pointer to a CRC_HandleTypeDef structure that contains + * the configuration information for CRC + * @retval None + */ +__weak void HAL_CRC_MspInit(CRC_HandleTypeDef *hcrc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hcrc); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_CRC_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes the CRC MSP. + * @param hcrc: pointer to a CRC_HandleTypeDef structure that contains + * the configuration information for CRC + * @retval None + */ +__weak void HAL_CRC_MspDeInit(CRC_HandleTypeDef *hcrc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hcrc); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_CRC_MspDeInit could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup CRC_Exported_Functions_Group2 Peripheral Control functions + * @brief management functions. + * +@verbatim + ============================================================================== + ##### Peripheral Control functions ##### + ============================================================================== + [..] This section provides functions allowing to: + (+) Compute the 32-bit CRC value of 32-bit data buffer, + using combination of the previous CRC value and the new one. + (+) Compute the 32-bit CRC value of 32-bit data buffer, + independently of the previous CRC value. + +@endverbatim + * @{ + */ + +/** + * @brief Computes the 32-bit CRC of 32-bit data buffer using combination + * of the previous CRC value and the new one. + * @param hcrc: pointer to a CRC_HandleTypeDef structure that contains + * the configuration information for CRC + * @param pBuffer: pointer to the buffer containing the data to be computed + * @param BufferLength: length of the buffer to be computed (defined in word, 4 bytes) + * @retval 32-bit CRC + */ +uint32_t HAL_CRC_Accumulate(CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength) +{ + uint32_t index = 0; + + /* Process Locked */ + __HAL_LOCK(hcrc); + + /* Change CRC peripheral state */ + hcrc->State = HAL_CRC_STATE_BUSY; + + /* Enter Data to the CRC calculator */ + for(index = 0; index < BufferLength; index++) + { + hcrc->Instance->DR = pBuffer[index]; + } + + /* Change CRC peripheral state */ + hcrc->State = HAL_CRC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hcrc); + + /* Return the CRC computed value */ + return hcrc->Instance->DR; +} + +/** + * @brief Computes the 32-bit CRC of 32-bit data buffer independently + * of the previous CRC value. + * @param hcrc: pointer to a CRC_HandleTypeDef structure that contains + * the configuration information for CRC + * @param pBuffer: Pointer to the buffer containing the data to be computed + * @param BufferLength: Length of the buffer to be computed (defined in word, 4 bytes) + * @retval 32-bit CRC + */ +uint32_t HAL_CRC_Calculate(CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength) +{ + uint32_t index = 0; + + /* Process Locked */ + __HAL_LOCK(hcrc); + + /* Change CRC peripheral state */ + hcrc->State = HAL_CRC_STATE_BUSY; + + /* Reset CRC Calculation Unit */ + __HAL_CRC_DR_RESET(hcrc); + + /* Enter Data to the CRC calculator */ + for(index = 0; index < BufferLength; index++) + { + hcrc->Instance->DR = pBuffer[index]; + } + + /* Change CRC peripheral state */ + hcrc->State = HAL_CRC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hcrc); + + /* Return the CRC computed value */ + return hcrc->Instance->DR; +} + +/** + * @} + */ + +/** @defgroup CRC_Exported_Functions_Group3 Peripheral State functions + * @brief Peripheral State functions. + * +@verbatim + ============================================================================== + ##### Peripheral State functions ##### + ============================================================================== + [..] + This subsection permits to get in run-time the status of the peripheral + and the data flow. + +@endverbatim + * @{ + */ + +/** + * @brief Returns the CRC state. + * @param hcrc: pointer to a CRC_HandleTypeDef structure that contains + * the configuration information for CRC + * @retval HAL state + */ +HAL_CRC_StateTypeDef HAL_CRC_GetState(CRC_HandleTypeDef *hcrc) +{ + return hcrc->State; +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_CRC_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_cryp.c b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_cryp.c new file mode 100755 index 0000000..164080f --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_cryp.c @@ -0,0 +1,2181 @@ +/** + ****************************************************************************** + * @file stm32l1xx_hal_cryp.c + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief CRYP HAL module driver. + * + * This file provides firmware functions to manage the following + * functionalities of the Cryptography (CRYP) peripheral: + * + Initialization and de-initialization functions + * + Processing functions by algorithm using polling mode + * + Processing functions by algorithm using interrupt mode + * + Processing functions by algorithm using DMA mode + * + Peripheral State functions + * + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The CRYP HAL driver can be used as follows: + + (#)Initialize the CRYP low level resources by implementing the HAL_CRYP_MspInit(): + (##) Enable the CRYP interface clock using __HAL_RCC_CRYP_CLK_ENABLE() + (##) In case of using interrupts (e.g. HAL_CRYP_AESECB_Encrypt_IT()) + (+) Configure the CRYP interrupt priority using HAL_NVIC_SetPriority() + (+) Enable the CRYP IRQ handler using HAL_NVIC_EnableIRQ() + (+) In CRYP IRQ handler, call HAL_CRYP_IRQHandler() + (##) In case of using DMA to control data transfer (e.g. HAL_CRYP_AESECB_Encrypt_DMA()) + (+) Enable the DMA2 interface clock using + (++) __HAL_RCC_DMA2_CLK_ENABLE() + (+) Configure and enable two DMA Channels one for managing data transfer from + memory to peripheral (input channel) and another channel for managing data + transfer from peripheral to memory (output channel) + (+) Associate the initialized DMA handle to the CRYP DMA handle + using __HAL_LINKDMA() + (+) Configure the priority and enable the NVIC for the transfer complete + interrupt on the two DMA Streams. The output stream should have higher + priority than the input stream. + (++) HAL_NVIC_SetPriority() + (++) HAL_NVIC_EnableIRQ() + + (#)Initialize the CRYP HAL using HAL_CRYP_Init(). This function configures mainly: + (##) The data type: 1-bit, 8-bit, 16-bit and 32-bit + (##) The encryption/decryption key. + (##) The initialization vector (counter). It is not used ECB mode. + + (#)Three processing (encryption/decryption) functions are available: + (##) Polling mode: encryption and decryption APIs are blocking functions + i.e. they process the data and wait till the processing is finished + e.g. HAL_CRYP_AESCBC_Encrypt() + (##) Interrupt mode: encryption and decryption APIs are not blocking functions + i.e. they process the data under interrupt + e.g. HAL_CRYP_AESCBC_Encrypt_IT() + (##) DMA mode: encryption and decryption APIs are not blocking functions + i.e. the data transfer is ensured by DMA + e.g. HAL_CRYP_AESCBC_Encrypt_DMA() + + (#)When the processing function is called for the first time after HAL_CRYP_Init() + the CRYP peripheral is initialized and processes the buffer in input. + At second call, the processing function performs an append of the already + processed buffer. + When a new data block is to be processed, call HAL_CRYP_Init() then the + processing function. + + (#)Call HAL_CRYP_DeInit() to deinitialize the CRYP peripheral. + + @endverbatim + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_hal.h" + +#ifdef HAL_CRYP_MODULE_ENABLED + +/** @addtogroup STM32L1xx_HAL_Driver + * @{ + */ + +/** @defgroup CRYP CRYP + * @brief CRYP HAL module driver. + * @{ + */ + +#if defined(STM32L162xC) || defined(STM32L162xCA) || defined(STM32L162xD) || defined(STM32L162xE) || defined(STM32L162xDX) + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ + +/** @defgroup CRYP_Private_Defines CRYP Private Defines + * @{ + */ + +#define CRYP_ALGO_CHAIN_MASK (AES_CR_MODE | AES_CR_CHMOD) + +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ + +/** @defgroup CRYP_Private_Functions CRYP Private Functions + * @{ + */ + +static HAL_StatusTypeDef CRYP_EncryptDecrypt_IT(CRYP_HandleTypeDef *hcryp); +static void CRYP_SetInitVector(CRYP_HandleTypeDef *hcryp, uint8_t *InitVector); +static void CRYP_SetKey(CRYP_HandleTypeDef *hcryp, uint8_t *Key); +static HAL_StatusTypeDef CRYP_ProcessData(CRYP_HandleTypeDef *hcryp, uint8_t* Input, uint16_t Ilength, uint8_t* Output, uint32_t Timeout); +static void CRYP_DMAInCplt(DMA_HandleTypeDef *hdma); +static void CRYP_DMAOutCplt(DMA_HandleTypeDef *hdma); +static void CRYP_DMAError(DMA_HandleTypeDef *hdma); +static void CRYP_SetDMAConfig(CRYP_HandleTypeDef *hcryp, uint32_t inputaddr, uint16_t Size, uint32_t outputaddr); + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup CRYP_Exported_Functions CRYP Exported Functions + * @{ + */ + +/** @defgroup CRYP_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions. + * +@verbatim + ============================================================================== + ##### Initialization and de-initialization functions ##### + ============================================================================== + [..] This section provides functions allowing to: + (+) Initialize the CRYP according to the specified parameters + in the CRYP_InitTypeDef and creates the associated handle + (+) DeInitialize the CRYP peripheral + (+) Initialize the CRYP MSP + (+) DeInitialize CRYP MSP + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the CRYP according to the specified + * parameters in the CRYP_InitTypeDef and creates the associated handle. + * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRYP_Init(CRYP_HandleTypeDef *hcryp) +{ + /* Check the CRYP handle allocation */ + if(hcryp == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_AES_ALL_INSTANCE(hcryp->Instance)); + assert_param(IS_CRYP_DATATYPE(hcryp->Init.DataType)); + + if(hcryp->State == HAL_CRYP_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hcryp->Lock = HAL_UNLOCKED; + + /* Init the low level hardware */ + HAL_CRYP_MspInit(hcryp); + } + + /* Check if AES already enabled */ + if (HAL_IS_BIT_CLR(hcryp->Instance->CR, AES_CR_EN)) + { + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_BUSY; + + /* Set the data type*/ + MODIFY_REG(hcryp->Instance->CR, AES_CR_DATATYPE, hcryp->Init.DataType); + + /* Reset CrypInCount and CrypOutCount */ + hcryp->CrypInCount = 0; + hcryp->CrypOutCount = 0; + + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_READY; + + /* Set the default CRYP phase */ + hcryp->Phase = HAL_CRYP_PHASE_READY; + + /* Return function status */ + return HAL_OK; + } + else + { + /* The Datatype selection must be changed if the AES is disabled. Writing these bits while the AES is */ + /* enabled is forbidden to avoid unpredictable AES behavior.*/ + + /* Return function status */ + return HAL_ERROR; + } + +} + +/** + * @brief DeInitializes the CRYP peripheral. + * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRYP_DeInit(CRYP_HandleTypeDef *hcryp) +{ + /* Check the CRYP handle allocation */ + if(hcryp == NULL) + { + return HAL_ERROR; + } + + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_BUSY; + + /* Set the default CRYP phase */ + hcryp->Phase = HAL_CRYP_PHASE_READY; + + /* Reset CrypInCount and CrypOutCount */ + hcryp->CrypInCount = 0; + hcryp->CrypOutCount = 0; + + /* Disable the CRYP Peripheral Clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* DeInit the low level hardware: CLOCK, NVIC.*/ + HAL_CRYP_MspDeInit(hcryp); + + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(hcryp); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Initializes the CRYP MSP. + * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @retval None + */ +__weak void HAL_CRYP_MspInit(CRYP_HandleTypeDef *hcryp) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hcryp); + + /* NOTE : This function should not be modified; when the callback is needed, + the HAL_CRYP_MspInit can be implemented in the user file */ +} + +/** + * @brief DeInitializes CRYP MSP. + * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @retval None + */ +__weak void HAL_CRYP_MspDeInit(CRYP_HandleTypeDef *hcryp) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hcryp); + + /* NOTE : This function should not be modified; when the callback is needed, + the HAL_CRYP_MspDeInit can be implemented in the user file */ +} + +/** + * @} + */ + +/** @defgroup CRYP_Exported_Functions_Group2 AES processing functions + * @brief processing functions. + * +@verbatim + ============================================================================== + ##### AES processing functions ##### + ============================================================================== + [..] This section provides functions allowing to: + (+) Encrypt plaintext using AES algorithm in different chaining modes + (+) Decrypt cyphertext using AES algorithm in different chaining modes + [..] Three processing functions are available: + (+) Polling mode + (+) Interrupt mode + (+) DMA mode + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the CRYP peripheral in AES ECB encryption mode + * then encrypt pPlainData. The cypher data are available in pCypherData + * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @param pPlainData: Pointer to the plaintext buffer (aligned on u32) + * @param Size: Length of the plaintext buffer, must be a multiple of 16. + * @param pCypherData: Pointer to the cyphertext buffer (aligned on u32) + * @param Timeout: Specify Timeout value + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRYP_AESECB_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout) +{ + /* Process Locked */ + __HAL_LOCK(hcryp); + + /* Check that data aligned on u32 and Size multiple of 16*/ + if((((uint32_t)pPlainData & (uint32_t)0x00000003) != 0) || (((uint32_t)pCypherData & (uint32_t)0x00000003) != 0) || ((Size & (uint16_t)0x000F) != 0)) + { + /* Process Locked */ + __HAL_UNLOCK(hcryp); + + /* Return function status */ + return HAL_ERROR; + } + + /* Check if HAL_CRYP_Init has been called */ + if(hcryp->State != HAL_CRYP_STATE_RESET) + { + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_BUSY; + + /* Check if initialization phase has already been performed */ + if(hcryp->Phase == HAL_CRYP_PHASE_READY) + { + /* Set the key */ + CRYP_SetKey(hcryp, hcryp->Init.pKey); + + /* Reset the CHMOD & MODE bits */ + CLEAR_BIT(hcryp->Instance->CR, CRYP_ALGO_CHAIN_MASK); + + /* Set the CRYP peripheral in AES ECB mode */ + __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_ECB_ENCRYPT); + + /* Enable CRYP */ + __HAL_CRYP_ENABLE(hcryp); + + /* Set the phase */ + hcryp->Phase = HAL_CRYP_PHASE_PROCESS; + } + + /* Write Plain Data and Get Cypher Data */ + if(CRYP_ProcessData(hcryp, pPlainData, Size, pCypherData, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hcryp); + + /* Return function status */ + return HAL_OK; + } + else + { + /* Process Locked */ + __HAL_UNLOCK(hcryp); + + /* Return function status */ + return HAL_ERROR; + } +} + +/** + * @brief Initializes the CRYP peripheral in AES CBC encryption mode + * then encrypt pPlainData. The cypher data are available in pCypherData + * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @param pPlainData: Pointer to the plaintext buffer (aligned on u32) + * @param Size: Length of the plaintext buffer, must be a multiple of 16. + * @param pCypherData: Pointer to the cyphertext buffer (aligned on u32) + * @param Timeout: Specify Timeout value + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRYP_AESCBC_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout) +{ + /* Process Locked */ + __HAL_LOCK(hcryp); + + /* Check that data aligned on u32 */ + if((((uint32_t)pPlainData & (uint32_t)0x00000003) != 0) || (((uint32_t)pCypherData & (uint32_t)0x00000003) != 0) || ((Size & (uint16_t)0x000F) != 0)) + { + /* Process Locked */ + __HAL_UNLOCK(hcryp); + + /* Return function status */ + return HAL_ERROR; + } + + /* Check if HAL_CRYP_Init has been called */ + if(hcryp->State != HAL_CRYP_STATE_RESET) + { + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_BUSY; + + /* Check if initialization phase has already been performed */ + if(hcryp->Phase == HAL_CRYP_PHASE_READY) + { + /* Set the key */ + CRYP_SetKey(hcryp, hcryp->Init.pKey); + + /* Reset the CHMOD & MODE bits */ + CLEAR_BIT(hcryp->Instance->CR, CRYP_ALGO_CHAIN_MASK); + + /* Set the CRYP peripheral in AES CBC mode */ + __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CBC_ENCRYPT); + + /* Set the Initialization Vector */ + CRYP_SetInitVector(hcryp, hcryp->Init.pInitVect); + + /* Enable CRYP */ + __HAL_CRYP_ENABLE(hcryp); + + /* Set the phase */ + hcryp->Phase = HAL_CRYP_PHASE_PROCESS; + } + + /* Write Plain Data and Get Cypher Data */ + if(CRYP_ProcessData(hcryp, pPlainData, Size, pCypherData, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hcryp); + + /* Return function status */ + return HAL_OK; + } + else + { + /* Process Locked */ + __HAL_UNLOCK(hcryp); + + /* Return function status */ + return HAL_ERROR; + } +} + +/** + * @brief Initializes the CRYP peripheral in AES CTR encryption mode + * then encrypt pPlainData. The cypher data are available in pCypherData + * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @param pPlainData: Pointer to the plaintext buffer (aligned on u32) + * @param Size: Length of the plaintext buffer, must be a multiple of 16. + * @param pCypherData: Pointer to the cyphertext buffer (aligned on u32) + * @param Timeout: Specify Timeout value + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRYP_AESCTR_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout) +{ + /* Process Locked */ + __HAL_LOCK(hcryp); + + /* Check that data aligned on u32 */ + if((((uint32_t)pPlainData & (uint32_t)0x00000003) != 0) || (((uint32_t)pCypherData & (uint32_t)0x00000003) != 0) || ((Size & (uint16_t)0x000F) != 0)) + { + /* Process Locked */ + __HAL_UNLOCK(hcryp); + + /* Return function status */ + return HAL_ERROR; + } + + /* Check if HAL_CRYP_Init has been called */ + if(hcryp->State != HAL_CRYP_STATE_RESET) + { + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_BUSY; + + /* Check if initialization phase has already been performed */ + if(hcryp->Phase == HAL_CRYP_PHASE_READY) + { + /* Set the key */ + CRYP_SetKey(hcryp, hcryp->Init.pKey); + + /* Reset the CHMOD & MODE bits */ + CLEAR_BIT(hcryp->Instance->CR, CRYP_ALGO_CHAIN_MASK); + + /* Set the CRYP peripheral in AES CTR mode */ + __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CTR_ENCRYPT); + + /* Set the Initialization Vector */ + CRYP_SetInitVector(hcryp, hcryp->Init.pInitVect); + + /* Enable CRYP */ + __HAL_CRYP_ENABLE(hcryp); + + /* Set the phase */ + hcryp->Phase = HAL_CRYP_PHASE_PROCESS; + } + + /* Write Plain Data and Get Cypher Data */ + if(CRYP_ProcessData(hcryp, pPlainData, Size, pCypherData, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hcryp); + + /* Return function status */ + return HAL_OK; + } + else + { + /* Release Lock */ + __HAL_UNLOCK(hcryp); + + /* Return function status */ + return HAL_ERROR; + } +} + +/** + * @brief Initializes the CRYP peripheral in AES ECB decryption mode + * then decrypted pCypherData. The cypher data are available in pPlainData + * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @param pCypherData: Pointer to the cyphertext buffer (aligned on u32) + * @param Size: Length of the plaintext buffer, must be a multiple of 16. + * @param pPlainData: Pointer to the plaintext buffer (aligned on u32) + * @param Timeout: Specify Timeout value + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRYP_AESECB_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout) +{ + /* Process Locked */ + __HAL_LOCK(hcryp); + + /* Check that data aligned on u32 */ + if((((uint32_t)pPlainData & (uint32_t)0x00000003) != 0) || (((uint32_t)pCypherData & (uint32_t)0x00000003) != 0) || ((Size & (uint16_t)0x000F) != 0)) + { + /* Process Locked */ + __HAL_UNLOCK(hcryp); + + /* Return function status */ + return HAL_ERROR; + } + + /* Check if HAL_CRYP_Init has been called */ + if(hcryp->State != HAL_CRYP_STATE_RESET) + { + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_BUSY; + + /* Check if initialization phase has already been performed */ + if(hcryp->Phase == HAL_CRYP_PHASE_READY) + { + /* Set the key */ + CRYP_SetKey(hcryp, hcryp->Init.pKey); + + /* Reset the CHMOD & MODE bits */ + CLEAR_BIT(hcryp->Instance->CR, CRYP_ALGO_CHAIN_MASK); + + /* Set the CRYP peripheral in AES ECB decryption mode (with key derivation) */ + __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_ECB_KEYDERDECRYPT); + + /* Enable CRYP */ + __HAL_CRYP_ENABLE(hcryp); + + /* Set the phase */ + hcryp->Phase = HAL_CRYP_PHASE_PROCESS; + } + + /* Write Cypher Data and Get Plain Data */ + if(CRYP_ProcessData(hcryp, pCypherData, Size, pPlainData, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hcryp); + + /* Return function status */ + return HAL_OK; + } + else + { + /* Release Lock */ + __HAL_UNLOCK(hcryp); + + /* Return function status */ + return HAL_ERROR; + } +} + +/** + * @brief Initializes the CRYP peripheral in AES ECB decryption mode + * then decrypted pCypherData. The cypher data are available in pPlainData + * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @param pCypherData: Pointer to the cyphertext buffer (aligned on u32) + * @param Size: Length of the plaintext buffer, must be a multiple of 16. + * @param pPlainData: Pointer to the plaintext buffer (aligned on u32) + * @param Timeout: Specify Timeout value + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRYP_AESCBC_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout) +{ + /* Process Locked */ + __HAL_LOCK(hcryp); + + /* Check that data aligned on u32 */ + if((((uint32_t)pPlainData & (uint32_t)0x00000003) != 0) || (((uint32_t)pCypherData & (uint32_t)0x00000003) != 0) || ((Size & (uint16_t)0x000F) != 0)) + { + /* Process Locked */ + __HAL_UNLOCK(hcryp); + + /* Return function status */ + return HAL_ERROR; + } + + /* Check if HAL_CRYP_Init has been called */ + if(hcryp->State != HAL_CRYP_STATE_RESET) + { + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_BUSY; + + /* Check if initialization phase has already been performed */ + if(hcryp->Phase == HAL_CRYP_PHASE_READY) + { + /* Set the key */ + CRYP_SetKey(hcryp, hcryp->Init.pKey); + + /* Reset the CHMOD & MODE bits */ + CLEAR_BIT(hcryp->Instance->CR, CRYP_ALGO_CHAIN_MASK); + + /* Set the CRYP peripheral in AES CBC decryption mode (with key derivation) */ + __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CBC_KEYDERDECRYPT); + + /* Set the Initialization Vector */ + CRYP_SetInitVector(hcryp, hcryp->Init.pInitVect); + + /* Enable CRYP */ + __HAL_CRYP_ENABLE(hcryp); + + /* Set the phase */ + hcryp->Phase = HAL_CRYP_PHASE_PROCESS; + } + + /* Write Cypher Data and Get Plain Data */ + if(CRYP_ProcessData(hcryp, pCypherData, Size, pPlainData, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hcryp); + + /* Return function status */ + return HAL_OK; + } + else + { + /* Release Lock */ + __HAL_UNLOCK(hcryp); + + /* Return function status */ + return HAL_ERROR; + } +} + +/** + * @brief Initializes the CRYP peripheral in AES CTR decryption mode + * then decrypted pCypherData. The cypher data are available in pPlainData + * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @param pCypherData: Pointer to the cyphertext buffer (aligned on u32) + * @param Size: Length of the plaintext buffer, must be a multiple of 16. + * @param pPlainData: Pointer to the plaintext buffer (aligned on u32) + * @param Timeout: Specify Timeout value + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRYP_AESCTR_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout) +{ + /* Process Locked */ + __HAL_LOCK(hcryp); + + /* Check that data aligned on u32 */ + if((((uint32_t)pPlainData & (uint32_t)0x00000003) != 0) || (((uint32_t)pCypherData & (uint32_t)0x00000003) != 0) || ((Size & (uint16_t)0x000F) != 0)) + { + /* Process Locked */ + __HAL_UNLOCK(hcryp); + + /* Return function status */ + return HAL_ERROR; + } + + /* Check if initialization phase has already been performed */ + if ((hcryp->State != HAL_CRYP_STATE_RESET) && (hcryp->Phase == HAL_CRYP_PHASE_READY)) + { + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_BUSY; + + /* Set the key */ + CRYP_SetKey(hcryp, hcryp->Init.pKey); + + /* Reset the CHMOD & MODE bits */ + CLEAR_BIT(hcryp->Instance->CR, CRYP_ALGO_CHAIN_MASK); + + /* Set the CRYP peripheral in AES CTR decryption mode */ + __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CTR_DECRYPT); + + /* Set the Initialization Vector */ + CRYP_SetInitVector(hcryp, hcryp->Init.pInitVect); + + /* Enable CRYP */ + __HAL_CRYP_ENABLE(hcryp); + + /* Set the phase */ + hcryp->Phase = HAL_CRYP_PHASE_PROCESS; + } + + /* Write Cypher Data and Get Plain Data */ + if(CRYP_ProcessData(hcryp, pCypherData, Size, pPlainData, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hcryp); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Initializes the CRYP peripheral in AES ECB encryption mode using Interrupt. + * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @param pPlainData: Pointer to the plaintext buffer (aligned on u32) + * @param Size: Length of the plaintext buffer, must be a multiple of 16 bytes + * @param pCypherData: Pointer to the cyphertext buffer (aligned on u32) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRYP_AESECB_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData) +{ + uint32_t inputaddr = 0; + + /* Check that data aligned on u32 */ + if((((uint32_t)pPlainData & (uint32_t)0x00000003) != 0) || (((uint32_t)pCypherData & (uint32_t)0x00000003) != 0) || ((Size & (uint16_t)0x000F) != 0)) + { + /* Process Locked */ + __HAL_UNLOCK(hcryp); + + /* Return function status */ + return HAL_ERROR; + } + + if ((hcryp->State != HAL_CRYP_STATE_RESET) && (hcryp->State == HAL_CRYP_STATE_READY)) + { + /* Process Locked */ + __HAL_LOCK(hcryp); + + /* Get the buffer addresses and sizes */ + hcryp->CrypInCount = Size; + hcryp->pCrypInBuffPtr = pPlainData; + hcryp->pCrypOutBuffPtr = pCypherData; + hcryp->CrypOutCount = Size; + + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_BUSY; + + /* Check if initialization phase has already been performed */ + if(hcryp->Phase == HAL_CRYP_PHASE_READY) + { + /* Set the key */ + CRYP_SetKey(hcryp, hcryp->Init.pKey); + + /* Reset the CHMOD & MODE bits */ + CLEAR_BIT(hcryp->Instance->CR, CRYP_ALGO_CHAIN_MASK); + + /* Set the CRYP peripheral in AES ECB mode */ + __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_ECB_ENCRYPT); + + /* Set the phase */ + hcryp->Phase = HAL_CRYP_PHASE_PROCESS; + } + + /* Enable Interrupts */ + __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_CC); + + /* Enable CRYP */ + __HAL_CRYP_ENABLE(hcryp); + + /* Get the last input data adress */ + inputaddr = (uint32_t)hcryp->pCrypInBuffPtr; + + /* Write the Input block in the Data Input register */ + hcryp->Instance->DINR = *(uint32_t*)(inputaddr); + inputaddr+=4; + hcryp->Instance->DINR = *(uint32_t*)(inputaddr); + inputaddr+=4; + hcryp->Instance->DINR = *(uint32_t*)(inputaddr); + inputaddr+=4; + hcryp->Instance->DINR = *(uint32_t*)(inputaddr); + hcryp->pCrypInBuffPtr += 16; + hcryp->CrypInCount -= 16; + + /* Return function status */ + return HAL_OK; + } + else + { + /* Release Lock */ + __HAL_UNLOCK(hcryp); + + /* Return function status */ + return HAL_ERROR; + } +} + +/** + * @brief Initializes the CRYP peripheral in AES CBC encryption mode using Interrupt. + * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @param pPlainData: Pointer to the plaintext buffer (aligned on u32) + * @param Size: Length of the plaintext buffer, must be a multiple of 16 bytes + * @param pCypherData: Pointer to the cyphertext buffer (aligned on u32) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRYP_AESCBC_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData) +{ + uint32_t inputaddr = 0; + + /* Check that data aligned on u32 */ + if((((uint32_t)pPlainData & (uint32_t)0x00000003) != 0) || (((uint32_t)pCypherData & (uint32_t)0x00000003) != 0) || ((Size & (uint16_t)0x000F) != 0)) + { + /* Process Locked */ + __HAL_UNLOCK(hcryp); + + /* Return function status */ + return HAL_ERROR; + } + + if ((hcryp->State != HAL_CRYP_STATE_RESET) && (hcryp->State == HAL_CRYP_STATE_READY)) + { + /* Process Locked */ + __HAL_LOCK(hcryp); + + /* Get the buffer addresses and sizes */ + hcryp->CrypInCount = Size; + hcryp->pCrypInBuffPtr = pPlainData; + hcryp->pCrypOutBuffPtr = pCypherData; + hcryp->CrypOutCount = Size; + + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_BUSY; + + /* Check if initialization phase has already been performed */ + if(hcryp->Phase == HAL_CRYP_PHASE_READY) + { + /* Set the key */ + CRYP_SetKey(hcryp, hcryp->Init.pKey); + + /* Reset the CHMOD & MODE bits */ + CLEAR_BIT(hcryp->Instance->CR, CRYP_ALGO_CHAIN_MASK); + + /* Set the CRYP peripheral in AES CBC mode */ + __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CBC_ENCRYPT); + + /* Set the Initialization Vector */ + CRYP_SetInitVector(hcryp, hcryp->Init.pInitVect); + + /* Set the phase */ + hcryp->Phase = HAL_CRYP_PHASE_PROCESS; + } + + /* Enable Interrupts */ + __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_CC); + + /* Enable CRYP */ + __HAL_CRYP_ENABLE(hcryp); + + /* Get the last input data adress */ + inputaddr = (uint32_t)hcryp->pCrypInBuffPtr; + + /* Write the Input block in the Data Input register */ + hcryp->Instance->DINR = *(uint32_t*)(inputaddr); + inputaddr+=4; + hcryp->Instance->DINR = *(uint32_t*)(inputaddr); + inputaddr+=4; + hcryp->Instance->DINR = *(uint32_t*)(inputaddr); + inputaddr+=4; + hcryp->Instance->DINR = *(uint32_t*)(inputaddr); + hcryp->pCrypInBuffPtr += 16; + hcryp->CrypInCount -= 16; + + /* Return function status */ + return HAL_OK; + } + else + { + /* Release Lock */ + __HAL_UNLOCK(hcryp); + + /* Return function status */ + return HAL_ERROR; + } +} + +/** + * @brief Initializes the CRYP peripheral in AES CTR encryption mode using Interrupt. + * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @param pPlainData: Pointer to the plaintext buffer (aligned on u32) + * @param Size: Length of the plaintext buffer, must be a multiple of 16 bytes + * @param pCypherData: Pointer to the cyphertext buffer (aligned on u32) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRYP_AESCTR_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData) +{ + uint32_t inputaddr = 0; + + /* Check that data aligned on u32 */ + if((((uint32_t)pPlainData & (uint32_t)0x00000003) != 0) || (((uint32_t)pCypherData & (uint32_t)0x00000003) != 0) || ((Size & (uint16_t)0x000F) != 0)) + { + /* Process Locked */ + __HAL_UNLOCK(hcryp); + + /* Return function status */ + return HAL_ERROR; + } + + if ((hcryp->State != HAL_CRYP_STATE_RESET) && (hcryp->State == HAL_CRYP_STATE_READY)) + { + /* Process Locked */ + __HAL_LOCK(hcryp); + + /* Get the buffer addresses and sizes */ + hcryp->CrypInCount = Size; + hcryp->pCrypInBuffPtr = pPlainData; + hcryp->pCrypOutBuffPtr = pCypherData; + hcryp->CrypOutCount = Size; + + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_BUSY; + + /* Check if initialization phase has already been performed */ + if(hcryp->Phase == HAL_CRYP_PHASE_READY) + { + /* Set the key */ + CRYP_SetKey(hcryp, hcryp->Init.pKey); + + /* Reset the CHMOD & MODE bits */ + CLEAR_BIT(hcryp->Instance->CR, CRYP_ALGO_CHAIN_MASK); + + /* Set the CRYP peripheral in AES CTR mode */ + __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CTR_ENCRYPT); + + /* Set the Initialization Vector */ + CRYP_SetInitVector(hcryp, hcryp->Init.pInitVect); + + /* Set the phase */ + hcryp->Phase = HAL_CRYP_PHASE_PROCESS; + } + + /* Enable Interrupts */ + __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_CC); + + /* Enable CRYP */ + __HAL_CRYP_ENABLE(hcryp); + + /* Get the last input data adress */ + inputaddr = (uint32_t)hcryp->pCrypInBuffPtr; + + /* Write the Input block in the Data Input register */ + hcryp->Instance->DINR = *(uint32_t*)(inputaddr); + inputaddr+=4; + hcryp->Instance->DINR = *(uint32_t*)(inputaddr); + inputaddr+=4; + hcryp->Instance->DINR = *(uint32_t*)(inputaddr); + inputaddr+=4; + hcryp->Instance->DINR = *(uint32_t*)(inputaddr); + hcryp->pCrypInBuffPtr += 16; + hcryp->CrypInCount -= 16; + + /* Return function status */ + return HAL_OK; + } + else + { + /* Release Lock */ + __HAL_UNLOCK(hcryp); + + /* Return function status */ + return HAL_ERROR; + } +} + +/** + * @brief Initializes the CRYP peripheral in AES ECB decryption mode using Interrupt. + * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @param pCypherData: Pointer to the cyphertext buffer (aligned on u32) + * @param Size: Length of the plaintext buffer, must be a multiple of 16. + * @param pPlainData: Pointer to the plaintext buffer (aligned on u32) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRYP_AESECB_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData) +{ + uint32_t inputaddr = 0; + + /* Check that data aligned on u32 */ + if((((uint32_t)pPlainData & (uint32_t)0x00000003) != 0) || (((uint32_t)pCypherData & (uint32_t)0x00000003) != 0) || ((Size & (uint16_t)0x000F) != 0)) + { + /* Process Locked */ + __HAL_UNLOCK(hcryp); + + /* Return function status */ + return HAL_ERROR; + } + + if ((hcryp->State != HAL_CRYP_STATE_RESET) && (hcryp->State == HAL_CRYP_STATE_READY)) + { + /* Process Locked */ + __HAL_LOCK(hcryp); + + /* Get the buffer addresses and sizes */ + hcryp->CrypInCount = Size; + hcryp->pCrypInBuffPtr = pCypherData; + hcryp->pCrypOutBuffPtr = pPlainData; + hcryp->CrypOutCount = Size; + + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_BUSY; + + /* Check if initialization phase has already been performed */ + if(hcryp->Phase == HAL_CRYP_PHASE_READY) + { + /* Set the key */ + CRYP_SetKey(hcryp, hcryp->Init.pKey); + + /* Reset the CHMOD & MODE bits */ + CLEAR_BIT(hcryp->Instance->CR, CRYP_ALGO_CHAIN_MASK); + + /* Set the CRYP peripheral in AES ECB decryption mode (with key derivation) */ + __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_ECB_KEYDERDECRYPT); + + /* Set the phase */ + hcryp->Phase = HAL_CRYP_PHASE_PROCESS; + } + + /* Enable Interrupts */ + __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_CC); + + /* Enable CRYP */ + __HAL_CRYP_ENABLE(hcryp); + + /* Get the last input data adress */ + inputaddr = (uint32_t)hcryp->pCrypInBuffPtr; + + /* Write the Input block in the Data Input register */ + hcryp->Instance->DINR = *(uint32_t*)(inputaddr); + inputaddr+=4; + hcryp->Instance->DINR = *(uint32_t*)(inputaddr); + inputaddr+=4; + hcryp->Instance->DINR = *(uint32_t*)(inputaddr); + inputaddr+=4; + hcryp->Instance->DINR = *(uint32_t*)(inputaddr); + hcryp->pCrypInBuffPtr += 16; + hcryp->CrypInCount -= 16; + + /* Return function status */ + return HAL_OK; + } + else + { + /* Release Lock */ + __HAL_UNLOCK(hcryp); + + /* Return function status */ + return HAL_ERROR; + } +} + +/** + * @brief Initializes the CRYP peripheral in AES CBC decryption mode using IT. + * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @param pCypherData: Pointer to the cyphertext buffer (aligned on u32) + * @param Size: Length of the plaintext buffer, must be a multiple of 16 + * @param pPlainData: Pointer to the plaintext buffer (aligned on u32) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRYP_AESCBC_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData) +{ + uint32_t inputaddr = 0; + + /* Check that data aligned on u32 */ + if((((uint32_t)pPlainData & (uint32_t)0x00000003) != 0) || (((uint32_t)pCypherData & (uint32_t)0x00000003) != 0) || ((Size & (uint16_t)0x000F) != 0)) + { + /* Process Locked */ + __HAL_UNLOCK(hcryp); + + /* Return function status */ + return HAL_ERROR; + } + + if ((hcryp->State != HAL_CRYP_STATE_RESET) && (hcryp->State == HAL_CRYP_STATE_READY)) + { + /* Process Locked */ + __HAL_LOCK(hcryp); + + /* Get the buffer addresses and sizes */ + hcryp->CrypInCount = Size; + hcryp->pCrypInBuffPtr = pCypherData; + hcryp->pCrypOutBuffPtr = pPlainData; + hcryp->CrypOutCount = Size; + + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_BUSY; + + /* Check if initialization phase has already been performed */ + if(hcryp->Phase == HAL_CRYP_PHASE_READY) + { + /* Set the key */ + CRYP_SetKey(hcryp, hcryp->Init.pKey); + + /* Reset the CHMOD & MODE bits */ + CLEAR_BIT(hcryp->Instance->CR, CRYP_ALGO_CHAIN_MASK); + + /* Set the CRYP peripheral in AES CBC decryption mode (with key derivation) */ + __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CBC_KEYDERDECRYPT); + + /* Set the Initialization Vector */ + CRYP_SetInitVector(hcryp, hcryp->Init.pInitVect); + + /* Set the phase */ + hcryp->Phase = HAL_CRYP_PHASE_PROCESS; + } + + /* Enable Interrupts */ + __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_CC); + + /* Enable CRYP */ + __HAL_CRYP_ENABLE(hcryp); + + /* Get the last input data adress */ + inputaddr = (uint32_t)hcryp->pCrypInBuffPtr; + + /* Write the Input block in the Data Input register */ + hcryp->Instance->DINR = *(uint32_t*)(inputaddr); + inputaddr+=4; + hcryp->Instance->DINR = *(uint32_t*)(inputaddr); + inputaddr+=4; + hcryp->Instance->DINR = *(uint32_t*)(inputaddr); + inputaddr+=4; + hcryp->Instance->DINR = *(uint32_t*)(inputaddr); + hcryp->pCrypInBuffPtr += 16; + hcryp->CrypInCount -= 16; + + /* Return function status */ + return HAL_OK; + } + else + { + /* Release Lock */ + __HAL_UNLOCK(hcryp); + + /* Return function status */ + return HAL_ERROR; + } +} + +/** + * @brief Initializes the CRYP peripheral in AES CTR decryption mode using Interrupt. + * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @param pCypherData: Pointer to the cyphertext buffer (aligned on u32) + * @param Size: Length of the plaintext buffer, must be a multiple of 16 + * @param pPlainData: Pointer to the plaintext buffer (aligned on u32) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRYP_AESCTR_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData) +{ + uint32_t inputaddr = 0; + + /* Check that data aligned on u32 */ + if((((uint32_t)pPlainData & (uint32_t)0x00000003) != 0) || (((uint32_t)pCypherData & (uint32_t)0x00000003) != 0) || ((Size & (uint16_t)0x000F) != 0)) + { + /* Process Locked */ + __HAL_UNLOCK(hcryp); + + /* Return function status */ + return HAL_ERROR; + } + + if ((hcryp->State != HAL_CRYP_STATE_RESET) && (hcryp->State == HAL_CRYP_STATE_READY)) + { + /* Process Locked */ + __HAL_LOCK(hcryp); + + /* Get the buffer addresses and sizes */ + hcryp->CrypInCount = Size; + hcryp->pCrypInBuffPtr = pCypherData; + hcryp->pCrypOutBuffPtr = pPlainData; + hcryp->CrypOutCount = Size; + + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_BUSY; + + /* Check if initialization phase has already been performed */ + if(hcryp->Phase == HAL_CRYP_PHASE_READY) + { + /* Set the key */ + CRYP_SetKey(hcryp, hcryp->Init.pKey); + + /* Reset the CHMOD & MODE bits */ + CLEAR_BIT(hcryp->Instance->CR, CRYP_ALGO_CHAIN_MASK); + + /* Set the CRYP peripheral in AES CTR decryption mode */ + __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CTR_DECRYPT); + + /* Set the Initialization Vector */ + CRYP_SetInitVector(hcryp, hcryp->Init.pInitVect); + + /* Set the phase */ + hcryp->Phase = HAL_CRYP_PHASE_PROCESS; + } + + /* Enable Interrupts */ + __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_CC); + + /* Enable CRYP */ + __HAL_CRYP_ENABLE(hcryp); + + /* Get the last input data adress */ + inputaddr = (uint32_t)hcryp->pCrypInBuffPtr; + + /* Write the Input block in the Data Input register */ + hcryp->Instance->DINR = *(uint32_t*)(inputaddr); + inputaddr+=4; + hcryp->Instance->DINR = *(uint32_t*)(inputaddr); + inputaddr+=4; + hcryp->Instance->DINR = *(uint32_t*)(inputaddr); + inputaddr+=4; + hcryp->Instance->DINR = *(uint32_t*)(inputaddr); + hcryp->pCrypInBuffPtr += 16; + hcryp->CrypInCount -= 16; + + /* Return function status */ + return HAL_OK; + } + else + { + /* Release Lock */ + __HAL_UNLOCK(hcryp); + + /* Return function status */ + return HAL_ERROR; + } +} + +/** + * @brief Initializes the CRYP peripheral in AES ECB encryption mode using DMA. + * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @param pPlainData: Pointer to the plaintext buffer (aligned on u32) + * @param Size: Length of the plaintext buffer, must be a multiple of 16 bytes + * @param pCypherData: Pointer to the cyphertext buffer (aligned on u32) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRYP_AESECB_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData) +{ + uint32_t inputaddr = 0, outputaddr = 0; + + /* Check that data aligned on u32 */ + if((((uint32_t)pPlainData & (uint32_t)0x00000003) != 0) || (((uint32_t)pCypherData & (uint32_t)0x00000003) != 0) || ((Size & (uint16_t)0x000F) != 0)) + { + /* Process Locked */ + __HAL_UNLOCK(hcryp); + + /* Return function status */ + return HAL_ERROR; + } + + /* Check if HAL_CRYP_Init has been called */ + if ((hcryp->State != HAL_CRYP_STATE_RESET) && (hcryp->State == HAL_CRYP_STATE_READY)) + { + /* Process Locked */ + __HAL_LOCK(hcryp); + + inputaddr = (uint32_t)pPlainData; + outputaddr = (uint32_t)pCypherData; + + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_BUSY; + + /* Check if initialization phase has already been performed */ + if(hcryp->Phase == HAL_CRYP_PHASE_READY) + { + /* Set the key */ + CRYP_SetKey(hcryp, hcryp->Init.pKey); + + /* Set the CRYP peripheral in AES ECB mode */ + __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_ECB_ENCRYPT); + + /* Set the phase */ + hcryp->Phase = HAL_CRYP_PHASE_PROCESS; + } + /* Set the input and output addresses and start DMA transfer */ + CRYP_SetDMAConfig(hcryp, inputaddr, Size, outputaddr); + + /* Process Unlocked */ + __HAL_UNLOCK(hcryp); + + /* Return function status */ + return HAL_OK; + } + else + { + /* Release Lock */ + __HAL_UNLOCK(hcryp); + + return HAL_ERROR; + } +} + +/** + * @brief Initializes the CRYP peripheral in AES CBC encryption mode using DMA. + * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @param pPlainData: Pointer to the plaintext buffer (aligned on u32) + * @param Size: Length of the plaintext buffer, must be a multiple of 16. + * @param pCypherData: Pointer to the cyphertext buffer (aligned on u32) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRYP_AESCBC_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData) +{ + uint32_t inputaddr = 0, outputaddr = 0; + + /* Check that data aligned on u32 */ + if((((uint32_t)pPlainData & (uint32_t)0x00000003) != 0) || (((uint32_t)pCypherData & (uint32_t)0x00000003) != 0) || ((Size & (uint16_t)0x000F) != 0)) + { + /* Process Locked */ + __HAL_UNLOCK(hcryp); + + /* Return function status */ + return HAL_ERROR; + } + + /* Check if HAL_CRYP_Init has been called */ + if ((hcryp->State != HAL_CRYP_STATE_RESET) && (hcryp->State == HAL_CRYP_STATE_READY)) + { + /* Process Locked */ + __HAL_LOCK(hcryp); + + inputaddr = (uint32_t)pPlainData; + outputaddr = (uint32_t)pCypherData; + + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_BUSY; + + /* Check if initialization phase has already been performed */ + if(hcryp->Phase == HAL_CRYP_PHASE_READY) + { + /* Set the key */ + CRYP_SetKey(hcryp, hcryp->Init.pKey); + + /* Set the CRYP peripheral in AES CBC mode */ + __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CBC_ENCRYPT); + + /* Set the Initialization Vector */ + CRYP_SetInitVector(hcryp, hcryp->Init.pInitVect); + + /* Set the phase */ + hcryp->Phase = HAL_CRYP_PHASE_PROCESS; + } + /* Set the input and output addresses and start DMA transfer */ + CRYP_SetDMAConfig(hcryp, inputaddr, Size, outputaddr); + + /* Process Unlocked */ + __HAL_UNLOCK(hcryp); + + /* Return function status */ + return HAL_OK; + } + else + { + /* Release Lock */ + __HAL_UNLOCK(hcryp); + + return HAL_ERROR; + } +} + +/** + * @brief Initializes the CRYP peripheral in AES CTR encryption mode using DMA. + * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @param pPlainData: Pointer to the plaintext buffer (aligned on u32) + * @param Size: Length of the plaintext buffer, must be a multiple of 16. + * @param pCypherData: Pointer to the cyphertext buffer (aligned on u32) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRYP_AESCTR_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData) +{ + uint32_t inputaddr = 0, outputaddr = 0; + + /* Check that data aligned on u32 */ + if((((uint32_t)pPlainData & (uint32_t)0x00000003) != 0) || (((uint32_t)pCypherData & (uint32_t)0x00000003) != 0) || ((Size & (uint16_t)0x000F) != 0)) + { + /* Process Locked */ + __HAL_UNLOCK(hcryp); + + /* Return function status */ + return HAL_ERROR; + } + + /* Check if HAL_CRYP_Init has been called */ + if ((hcryp->State != HAL_CRYP_STATE_RESET) && (hcryp->State == HAL_CRYP_STATE_READY)) + { + /* Process Locked */ + __HAL_LOCK(hcryp); + + inputaddr = (uint32_t)pPlainData; + outputaddr = (uint32_t)pCypherData; + + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_BUSY; + + /* Check if initialization phase has already been performed */ + if(hcryp->Phase == HAL_CRYP_PHASE_READY) + { + /* Set the key */ + CRYP_SetKey(hcryp, hcryp->Init.pKey); + + /* Set the CRYP peripheral in AES CTR mode */ + __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CTR_ENCRYPT); + + /* Set the Initialization Vector */ + CRYP_SetInitVector(hcryp, hcryp->Init.pInitVect); + + /* Set the phase */ + hcryp->Phase = HAL_CRYP_PHASE_PROCESS; + } + + /* Set the input and output addresses and start DMA transfer */ + CRYP_SetDMAConfig(hcryp, inputaddr, Size, outputaddr); + + /* Process Unlocked */ + __HAL_UNLOCK(hcryp); + + /* Return function status */ + return HAL_OK; + } + else + { + /* Release Lock */ + __HAL_UNLOCK(hcryp); + + return HAL_ERROR; + } +} + +/** + * @brief Initializes the CRYP peripheral in AES ECB decryption mode using DMA. + * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @param pCypherData: Pointer to the cyphertext buffer (aligned on u32) + * @param Size: Length of the plaintext buffer, must be a multiple of 16 bytes + * @param pPlainData: Pointer to the plaintext buffer (aligned on u32) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRYP_AESECB_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData) +{ + uint32_t inputaddr = 0, outputaddr = 0; + + /* Check that data aligned on u32 */ + if((((uint32_t)pPlainData & (uint32_t)0x00000003) != 0) || (((uint32_t)pCypherData & (uint32_t)0x00000003) != 0) || ((Size & (uint16_t)0x000F) != 0)) + { + /* Process Locked */ + __HAL_UNLOCK(hcryp); + + /* Return function status */ + return HAL_ERROR; + } + + /* Check if HAL_CRYP_Init has been called */ + if ((hcryp->State != HAL_CRYP_STATE_RESET) && (hcryp->State == HAL_CRYP_STATE_READY)) + { + /* Process Locked */ + __HAL_LOCK(hcryp); + + inputaddr = (uint32_t)pCypherData; + outputaddr = (uint32_t)pPlainData; + + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_BUSY; + + /* Check if initialization phase has already been performed */ + if(hcryp->Phase == HAL_CRYP_PHASE_READY) + { + /* Set the key */ + CRYP_SetKey(hcryp, hcryp->Init.pKey); + + /* Reset the CHMOD & MODE bits */ + CLEAR_BIT(hcryp->Instance->CR, CRYP_ALGO_CHAIN_MASK); + + /* Set the CRYP peripheral in AES ECB decryption mode (with key derivation) */ + __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_ECB_KEYDERDECRYPT); + + /* Set the phase */ + hcryp->Phase = HAL_CRYP_PHASE_PROCESS; + } + + /* Set the input and output addresses and start DMA transfer */ + CRYP_SetDMAConfig(hcryp, inputaddr, Size, outputaddr); + + /* Process Unlocked */ + __HAL_UNLOCK(hcryp); + + /* Return function status */ + return HAL_OK; + } + else + { + /* Release Lock */ + __HAL_UNLOCK(hcryp); + + return HAL_ERROR; + } +} + +/** + * @brief Initializes the CRYP peripheral in AES CBC encryption mode using DMA. + * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @param pCypherData: Pointer to the cyphertext buffer (aligned on u32) + * @param Size: Length of the plaintext buffer, must be a multiple of 16 bytes + * @param pPlainData: Pointer to the plaintext buffer (aligned on u32) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRYP_AESCBC_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData) +{ + uint32_t inputaddr = 0, outputaddr = 0; + + /* Check that data aligned on u32 */ + if((((uint32_t)pPlainData & (uint32_t)0x00000003) != 0) || (((uint32_t)pCypherData & (uint32_t)0x00000003) != 0) || ((Size & (uint16_t)0x000F) != 0)) + { + /* Process Locked */ + __HAL_UNLOCK(hcryp); + + /* Return function status */ + return HAL_ERROR; + } + + /* Check if HAL_CRYP_Init has been called */ + if ((hcryp->State != HAL_CRYP_STATE_RESET) && (hcryp->State == HAL_CRYP_STATE_READY)) + { + /* Process Locked */ + __HAL_LOCK(hcryp); + + inputaddr = (uint32_t)pCypherData; + outputaddr = (uint32_t)pPlainData; + + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_BUSY; + + /* Check if initialization phase has already been performed */ + if(hcryp->Phase == HAL_CRYP_PHASE_READY) + { + /* Set the key */ + CRYP_SetKey(hcryp, hcryp->Init.pKey); + + /* Reset the CHMOD & MODE bits */ + CLEAR_BIT(hcryp->Instance->CR, CRYP_ALGO_CHAIN_MASK); + + /* Set the CRYP peripheral in AES CBC decryption mode (with key derivation) */ + __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CBC_KEYDERDECRYPT); + + /* Set the Initialization Vector */ + CRYP_SetInitVector(hcryp, hcryp->Init.pInitVect); + + /* Set the phase */ + hcryp->Phase = HAL_CRYP_PHASE_PROCESS; + } + + /* Set the input and output addresses and start DMA transfer */ + CRYP_SetDMAConfig(hcryp, inputaddr, Size, outputaddr); + + /* Process Unlocked */ + __HAL_UNLOCK(hcryp); + + /* Return function status */ + return HAL_OK; + } + else + { + /* Release Lock */ + __HAL_UNLOCK(hcryp); + + return HAL_ERROR; + } +} + +/** + * @brief Initializes the CRYP peripheral in AES CTR decryption mode using DMA. + * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @param pCypherData: Pointer to the cyphertext buffer (aligned on u32) + * @param Size: Length of the plaintext buffer, must be a multiple of 16 + * @param pPlainData: Pointer to the plaintext buffer (aligned on u32) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRYP_AESCTR_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData) +{ + uint32_t inputaddr = 0, outputaddr = 0; + + /* Check that data aligned on u32 */ + if((((uint32_t)pPlainData & (uint32_t)0x00000003) != 0) || (((uint32_t)pCypherData & (uint32_t)0x00000003) != 0) || ((Size & (uint16_t)0x000F) != 0)) + { + /* Process Locked */ + __HAL_UNLOCK(hcryp); + + /* Return function status */ + return HAL_ERROR; + } + + /* Check if HAL_CRYP_Init has been called */ + if ((hcryp->State != HAL_CRYP_STATE_RESET) && (hcryp->State == HAL_CRYP_STATE_READY)) + { + /* Process Locked */ + __HAL_LOCK(hcryp); + + inputaddr = (uint32_t)pCypherData; + outputaddr = (uint32_t)pPlainData; + + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_BUSY; + + /* Check if initialization phase has already been performed */ + if(hcryp->Phase == HAL_CRYP_PHASE_READY) + { + /* Set the key */ + CRYP_SetKey(hcryp, hcryp->Init.pKey); + + /* Set the CRYP peripheral in AES CTR mode */ + __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CTR_DECRYPT); + + /* Set the Initialization Vector */ + CRYP_SetInitVector(hcryp, hcryp->Init.pInitVect); + + /* Set the phase */ + hcryp->Phase = HAL_CRYP_PHASE_PROCESS; + } + + /* Set the input and output addresses and start DMA transfer */ + CRYP_SetDMAConfig(hcryp, inputaddr, Size, outputaddr); + + /* Process Unlocked */ + __HAL_UNLOCK(hcryp); + + /* Return function status */ + return HAL_OK; + } + else + { + /* Release Lock */ + __HAL_UNLOCK(hcryp); + + return HAL_ERROR; + } +} + +/** + * @} + */ + +/** @defgroup CRYP_Exported_Functions_Group3 DMA callback functions + * @brief DMA callback functions. + * +@verbatim + ============================================================================== + ##### DMA callback functions ##### + ============================================================================== + [..] This section provides DMA callback functions: + (+) DMA Input data transfer complete + (+) DMA Output data transfer complete + (+) DMA error + +@endverbatim + * @{ + */ + +/** + * @brief CRYP error callback. + * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @retval None + */ + __weak void HAL_CRYP_ErrorCallback(CRYP_HandleTypeDef *hcryp) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hcryp); + + /* NOTE : This function should not be modified; when the callback is needed, + the HAL_CRYP_ErrorCallback can be implemented in the user file + */ +} + +/** + * @brief Input transfer completed callback. + * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @retval None + */ +__weak void HAL_CRYP_InCpltCallback(CRYP_HandleTypeDef *hcryp) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hcryp); + + /* NOTE : This function should not be modified; when the callback is needed, + the HAL_CRYP_InCpltCallback can be implemented in the user file + */ +} + +/** + * @brief Output transfer completed callback. + * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @retval None + */ +__weak void HAL_CRYP_OutCpltCallback(CRYP_HandleTypeDef *hcryp) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hcryp); + + /* NOTE : This function should not be modified; when the callback is needed, + the HAL_CRYP_OutCpltCallback can be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup CRYP_Exported_Functions_Group4 CRYP IRQ handler + * @brief CRYP IRQ handler. + * +@verbatim + ============================================================================== + ##### CRYP IRQ handler management ##### + ============================================================================== +[..] This section provides CRYP IRQ handler function. + +@endverbatim + * @{ + */ + +/** + * @brief This function handles CRYP interrupt request. + * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @retval None + */ +void HAL_CRYP_IRQHandler(CRYP_HandleTypeDef *hcryp) +{ + /* Check if error occurred*/ + if (__HAL_CRYP_GET_IT_SOURCE(hcryp, CRYP_IT_ERR) != RESET) + { + if (__HAL_CRYP_GET_FLAG(hcryp,CRYP_FLAG_RDERR) != RESET) + { + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CLEARFLAG_RDERR); + } + + if (__HAL_CRYP_GET_FLAG(hcryp,CRYP_FLAG_WRERR) != RESET) + { + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CLEARFLAG_WRERR); + } + + if (__HAL_CRYP_GET_FLAG(hcryp, CRYP_FLAG_CCF) != RESET) + { + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CLEARFLAG_CCF); + } + + hcryp->State= HAL_CRYP_STATE_ERROR; + /* Disable Computation Complete Interrupt */ + __HAL_CRYP_DISABLE_IT(hcryp,CRYP_IT_CC); + __HAL_CRYP_DISABLE_IT(hcryp,CRYP_IT_ERR); + + HAL_CRYP_ErrorCallback(hcryp); + + /* Process Unlocked */ + __HAL_UNLOCK(hcryp); + + return; + } + + /* Check if computation complete interrupt was enabled*/ + if (__HAL_CRYP_GET_IT_SOURCE(hcryp, CRYP_IT_CC) != RESET) + { + /* Clear CCF Flag */ + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CLEARFLAG_CCF); + + CRYP_EncryptDecrypt_IT(hcryp); + } +} + +/** + * @} + */ + +/** @defgroup CRYP_Exported_Functions_Group5 Peripheral State functions + * @brief Peripheral State functions. + * +@verbatim + ============================================================================== + ##### Peripheral State functions ##### + ============================================================================== + [..] + This subsection permits to get in run-time the status of the peripheral. + +@endverbatim + * @{ + */ + +/** + * @brief Returns the CRYP state. + * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @retval HAL state + */ +HAL_CRYP_STATETypeDef HAL_CRYP_GetState(CRYP_HandleTypeDef *hcryp) +{ + return hcryp->State; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup CRYP_Private_Functions + * @{ + */ + +/** + * @brief IT function called under interruption context to continue encryption or decryption + * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @retval HAL status + */ +static HAL_StatusTypeDef CRYP_EncryptDecrypt_IT(CRYP_HandleTypeDef *hcryp) +{ + uint32_t inputaddr = 0, outputaddr = 0; + + /* Get the last Output data adress */ + outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr; + + /* Read the Output block from the Output Register */ + *(uint32_t*)(outputaddr) = hcryp->Instance->DOUTR; + outputaddr+=4; + *(uint32_t*)(outputaddr) = hcryp->Instance->DOUTR; + outputaddr+=4; + *(uint32_t*)(outputaddr) = hcryp->Instance->DOUTR; + outputaddr+=4; + *(uint32_t*)(outputaddr) = hcryp->Instance->DOUTR; + + hcryp->pCrypOutBuffPtr += 16; + hcryp->CrypOutCount -= 16; + + /* Check if all input text is encrypted or decrypted */ + if(hcryp->CrypOutCount == 0) + { + /* Disable Computation Complete Interrupt */ + __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_CC); + __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_ERR); + + /* Process Unlocked */ + __HAL_UNLOCK(hcryp); + + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_READY; + + /* Call computation complete callback */ + HAL_CRYPEx_ComputationCpltCallback(hcryp); + } + else /* Process the rest of input text */ + { + /* Get the last Intput data adress */ + inputaddr = (uint32_t)hcryp->pCrypInBuffPtr; + + /* Write the Input block in the Data Input register */ + hcryp->Instance->DINR = *(uint32_t*)(inputaddr); + inputaddr+=4; + hcryp->Instance->DINR = *(uint32_t*)(inputaddr); + inputaddr+=4; + hcryp->Instance->DINR = *(uint32_t*)(inputaddr); + inputaddr+=4; + hcryp->Instance->DINR = *(uint32_t*)(inputaddr); + hcryp->pCrypInBuffPtr += 16; + hcryp->CrypInCount -= 16; + } + return HAL_OK; +} +/** + * @brief DMA CRYP Input Data process complete callback. + * @param hdma: DMA handle + * @retval None + */ +static void CRYP_DMAInCplt(DMA_HandleTypeDef *hdma) +{ + CRYP_HandleTypeDef* hcryp = (CRYP_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent; + + /* Disable the DMA transfer for input request */ + CLEAR_BIT(hcryp->Instance->CR, AES_CR_DMAINEN); + + /* Call input data transfer complete callback */ + HAL_CRYP_InCpltCallback(hcryp); +} + +/** + * @brief DMA CRYP Output Data process complete callback. + * @param hdma: DMA handle + * @retval None + */ +static void CRYP_DMAOutCplt(DMA_HandleTypeDef *hdma) +{ + CRYP_HandleTypeDef* hcryp = (CRYP_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent; + + /* Disable the DMA transfer for output request by resetting the DMAOUTEN bit + in the DMACR register */ + CLEAR_BIT(hcryp->Instance->CR, AES_CR_DMAOUTEN); + + /* Clear CCF Flag */ + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CLEARFLAG_CCF); + + /* Disable CRYP */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change the CRYP state to ready */ + hcryp->State = HAL_CRYP_STATE_READY; + + /* Call output data transfer complete callback */ + HAL_CRYP_OutCpltCallback(hcryp); +} + +/** + * @brief DMA CRYP communication error callback. + * @param hdma: DMA handle + * @retval None + */ +static void CRYP_DMAError(DMA_HandleTypeDef *hdma) +{ + CRYP_HandleTypeDef* hcryp = (CRYP_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent; + hcryp->State= HAL_CRYP_STATE_ERROR; + HAL_CRYP_ErrorCallback(hcryp); +} + +/** + * @brief Writes the Key in Key registers. + * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @param Key: Pointer to Key buffer + * @note Key must be written as little endian. + * If Key pointer points at address n, + * n[15:0] contains key[96:127], + * (n+4)[15:0] contains key[64:95], + * (n+8)[15:0] contains key[32:63] and + * (n+12)[15:0] contains key[0:31] + * @retval None + */ +static void CRYP_SetKey(CRYP_HandleTypeDef *hcryp, uint8_t *Key) +{ + uint32_t keyaddr = (uint32_t)Key; + + hcryp->Instance->KEYR3 = __REV(*(uint32_t*)(keyaddr)); + keyaddr+=4; + hcryp->Instance->KEYR2 = __REV(*(uint32_t*)(keyaddr)); + keyaddr+=4; + hcryp->Instance->KEYR1 = __REV(*(uint32_t*)(keyaddr)); + keyaddr+=4; + hcryp->Instance->KEYR0 = __REV(*(uint32_t*)(keyaddr)); +} + +/** + * @brief Writes the InitVector/InitCounter in IV registers. + * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @param InitVector: Pointer to InitVector/InitCounter buffer + * @note Init Vector must be written as little endian. + * If Init Vector pointer points at address n, + * n[15:0] contains Vector[96:127], + * (n+4)[15:0] contains Vector[64:95], + * (n+8)[15:0] contains Vector[32:63] and + * (n+12)[15:0] contains Vector[0:31] + * @retval None + */ +static void CRYP_SetInitVector(CRYP_HandleTypeDef *hcryp, uint8_t *InitVector) +{ + uint32_t ivaddr = (uint32_t)InitVector; + + hcryp->Instance->IVR3 = __REV(*(uint32_t*)(ivaddr)); + ivaddr+=4; + hcryp->Instance->IVR2 = __REV(*(uint32_t*)(ivaddr)); + ivaddr+=4; + hcryp->Instance->IVR1 = __REV(*(uint32_t*)(ivaddr)); + ivaddr+=4; + hcryp->Instance->IVR0 = __REV(*(uint32_t*)(ivaddr)); +} + +/** + * @brief Process Data: Writes Input data in polling mode and reads the output data + * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @param Input: Pointer to the Input buffer + * @param Ilength: Length of the Input buffer, must be a multiple of 16. + * @param Output: Pointer to the returned buffer + * @param Timeout: Specify Timeout value + * @retval None + */ +static HAL_StatusTypeDef CRYP_ProcessData(CRYP_HandleTypeDef *hcryp, uint8_t* Input, uint16_t Ilength, uint8_t* Output, uint32_t Timeout) +{ + uint32_t tickstart = 0; + + uint32_t index = 0; + uint32_t inputaddr = (uint32_t)Input; + uint32_t outputaddr = (uint32_t)Output; + + for(index=0; (index < Ilength); index += 16) + { + /* Write the Input block in the Data Input register */ + hcryp->Instance->DINR = *(uint32_t*)(inputaddr); + inputaddr+=4; + hcryp->Instance->DINR = *(uint32_t*)(inputaddr); + inputaddr+=4; + hcryp->Instance->DINR = *(uint32_t*)(inputaddr); + inputaddr+=4; + hcryp->Instance->DINR = *(uint32_t*)(inputaddr); + inputaddr+=4; + + /* Get timeout */ + tickstart = HAL_GetTick(); + + while(HAL_IS_BIT_CLR(hcryp->Instance->SR, AES_SR_CCF)) + { + /* Check for the Timeout */ + if(Timeout != HAL_MAX_DELAY) + { + if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout)) + { + /* Change state */ + hcryp->State = HAL_CRYP_STATE_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hcryp); + + return HAL_TIMEOUT; + } + } + } + /* Clear CCF Flag */ + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CLEARFLAG_CCF); + + /* Read the Output block from the Data Output Register */ + *(uint32_t*)(outputaddr) = hcryp->Instance->DOUTR; + outputaddr+=4; + *(uint32_t*)(outputaddr) = hcryp->Instance->DOUTR; + outputaddr+=4; + *(uint32_t*)(outputaddr) = hcryp->Instance->DOUTR; + outputaddr+=4; + *(uint32_t*)(outputaddr) = hcryp->Instance->DOUTR; + outputaddr+=4; + } + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Set the DMA configuration and start the DMA transfer + * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @param inputaddr: address of the Input buffer + * @param Size: Size of the Input buffer, must be a multiple of 16. + * @param outputaddr: address of the Output buffer + * @retval None + */ +static void CRYP_SetDMAConfig(CRYP_HandleTypeDef *hcryp, uint32_t inputaddr, uint16_t Size, uint32_t outputaddr) +{ + /* Set the CRYP DMA transfer complete callback */ + hcryp->hdmain->XferCpltCallback = CRYP_DMAInCplt; + /* Set the DMA error callback */ + hcryp->hdmain->XferErrorCallback = CRYP_DMAError; + + /* Set the CRYP DMA transfer complete callback */ + hcryp->hdmaout->XferCpltCallback = CRYP_DMAOutCplt; + /* Set the DMA error callback */ + hcryp->hdmaout->XferErrorCallback = CRYP_DMAError; + + /* Enable the DMA In DMA Stream */ + HAL_DMA_Start_IT(hcryp->hdmain, inputaddr, (uint32_t)&hcryp->Instance->DINR, Size/4); + + /* Enable the DMA Out DMA Stream */ + HAL_DMA_Start_IT(hcryp->hdmaout, (uint32_t)&hcryp->Instance->DOUTR, outputaddr, Size/4); + + /* Enable In and Out DMA requests */ + SET_BIT(hcryp->Instance->CR, (AES_CR_DMAINEN | AES_CR_DMAOUTEN)); + + /* Enable CRYP */ + __HAL_CRYP_ENABLE(hcryp); +} + +/** + * @} + */ + +#endif /* STM32L162xC || STM32L162xCA || STM32L162xD || STM32L162xE || STM32L162xDX*/ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_CRYP_MODULE_ENABLED */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_cryp_ex.c b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_cryp_ex.c new file mode 100755 index 0000000..f99e7c6 --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_cryp_ex.c @@ -0,0 +1,121 @@ +/** + ****************************************************************************** + * @file stm32l1xx_hal_cryp_ex.c + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief CRYPEx HAL module driver. + * + * This file provides firmware functions to manage the following + * functionalities of the Cryptography (CRYP) extension peripheral: + * + Computation completed callback. + * + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_hal.h" + +#ifdef HAL_CRYP_MODULE_ENABLED + +/** @addtogroup STM32L1xx_HAL_Driver + * @{ + */ + +/** @defgroup CRYPEx CRYPEx + * @brief CRYP HAL Extended module driver. + * @{ + */ + +#if defined(STM32L162xC) || defined(STM32L162xCA) || defined(STM32L162xD) || defined(STM32L162xE) || defined(STM32L162xDX) + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup CRYPEx_Exported_Functions CRYPEx Exported Functions + * @{ + */ + + +/** @defgroup CRYPEx_Exported_Functions_Group1 Extended features functions + * @brief Extended features functions. + * +@verbatim + =============================================================================== + ##### Extended features functions ##### + =============================================================================== + [..] This section provides callback functions: + (+) Computation completed. + +@endverbatim + * @{ + */ + +/** + * @brief Computation completed callbacks. + * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @retval None + */ +__weak void HAL_CRYPEx_ComputationCpltCallback(CRYP_HandleTypeDef *hcryp) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hcryp); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_CRYPEx_ComputationCpltCallback could be implemented in the user file + */ +} + +/** + * @} + */ + + +/** + * @} + */ + +#endif /* STM32L162xC || STM32L162xCA || STM32L162xD || STM32L162xE || STM32L162xDX*/ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_CRYP_MODULE_ENABLED */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_dac.c b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_dac.c new file mode 100755 index 0000000..2be09a6 --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_dac.c @@ -0,0 +1,1001 @@ +/** + ****************************************************************************** + * @file stm32l1xx_hal_dac.c + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief DAC HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Digital to Analog Converter (DAC) peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral Control functions + * + Peripheral State and Errors functions + * + * + @verbatim + ============================================================================== + ##### DAC Peripheral features ##### + ============================================================================== + [..] + *** DAC Channels *** + ==================== + [..] + The device integrates two 12-bit Digital Analog Converters that can + be used independently or simultaneously (dual mode): + (#) DAC channel1 with DAC_OUT1 (PA4) as output + (#) DAC channel2 with DAC_OUT2 (PA5) as output + + *** DAC Triggers *** + ==================== + [..] + Digital to Analog conversion can be non-triggered using DAC_TRIGGER_NONE + and DAC_OUT1/DAC_OUT2 is available once writing to DHRx register. + [..] + Digital to Analog conversion can be triggered by: + (#) External event: EXTI Line 9 (any GPIOx_PIN_9) using DAC_TRIGGER_EXT_IT9. + The used pin (GPIOx_PIN_9) must be configured in input mode. + + (#) Timers TRGO: TIM2, TIM4, TIM6, TIM7, TIM9 + (DAC_Trigger_T2_TRGO, DAC_Trigger_T4_TRGO...) + + (#) Software using DAC_TRIGGER_SOFTWARE + + *** DAC Buffer mode feature *** + =============================== + [..] + Each DAC channel integrates an output buffer that can be used to + reduce the output impedance, and to drive external loads directly + without having to add an external operational amplifier. + To enable, the output buffer use + sConfig.DAC_OutputBuffer = DAC_OUTPUTBUFFER_ENABLE; + [..] + (@) Refer to the device datasheet for more details about output + impedance value with and without output buffer. + + *** DAC connect feature *** + =============================== + [..] + Each DAC channel can be connected internally. + To connect, use + sConfig.DAC_ConnectOnChipPeripheral = DAC_CHIPCONNECT_ENABLE; + + *** GPIO configurations guidelines *** + ===================== + [..] + When a DAC channel is used (ex channel1 on PA4) and the other is not + (ex channel1 on PA5 is configured in Analog and disabled). + Channel1 may disturb channel2 as coupling effect. + Note that there is no coupling on channel2 as soon as channel2 is turned on. + Coupling on adjacent channel could be avoided as follows: + when unused PA5 is configured as INPUT PULL-UP or DOWN. + PA5 is configured in ANALOG just before it is turned on. + + *** DAC wave generation feature *** + =================================== + [..] + Both DAC channels can be used to generate + (#) Noise wave using HAL_DACEx_NoiseWaveGenerate() + (#) Triangle wave using HAL_DACEx_TriangleWaveGenerate() + + *** DAC data format *** + ======================= + [..] + The DAC data format can be: + (#) 8-bit right alignment using DAC_ALIGN_8B_R + (#) 12-bit left alignment using DAC_ALIGN_12B_L + (#) 12-bit right alignment using DAC_ALIGN_12B_R + + *** DAC data value to voltage correspondance *** + ================================================ + [..] + The analog output voltage on each DAC channel pin is determined + by the following equation: + [..] + DAC_OUTx = VREF+ * DOR / 4095 + (+) with DOR is the Data Output Register + [..] + VEF+ is the input voltage reference (refer to the device datasheet) + [..] + e.g. To set DAC_OUT1 to 0.7V, use + (+) Assuming that VREF+ = 3.3V, DAC_OUT1 = (3.3 * 868) / 4095 = 0.7V + + *** DMA requests *** + ===================== + [..] + A DMA1 request can be generated when an external trigger (but not + a software trigger) occurs if DMA1 requests are enabled using + HAL_DAC_Start_DMA() + [..] + DMA1 requests are mapped as following: + (#) DAC channel1 : + mapped on DMA1 channel2 which must be + already configured + (#) DAC channel2 : + mapped on DMA1 channel3 which must be + already configured + + -@- For Dual mode and specific signal (Triangle and noise) generation please + refer to Extension Features Driver description + + + ##### How to use this driver ##### + ============================================================================== + [..] + (+) DAC APB clock must be enabled to get write access to DAC + registers using HAL_DAC_Init() + (+) Configure DAC_OUTx (DAC_OUT1: PA4, DAC_OUT2: PA5) in analog mode. + (+) Configure the DAC channel using HAL_DAC_ConfigChannel() function. + (+) Enable the DAC channel using HAL_DAC_Start() or HAL_DAC_Start_DMA functions + + *** Polling mode IO operation *** + ================================= + [..] + (+) Start the DAC peripheral using HAL_DAC_Start() + (+) To read the DAC last data output value, use the HAL_DAC_GetValue() function. + (+) Stop the DAC peripheral using HAL_DAC_Stop() + + *** DMA mode IO operation *** + ============================== + [..] + (+) Start the DAC peripheral using HAL_DAC_Start_DMA(), at this stage the user specify the length + of data to be transferred at each end of conversion + (+) At the middle of data transfer HAL_DACEx_ConvHalfCpltCallbackCh1()or HAL_DACEx_ConvHalfCpltCallbackCh2() + function is executed and user can add his own code by customization of function pointer + HAL_DAC_ConvHalfCpltCallbackCh1 or HAL_DAC_ConvHalfCpltCallbackCh2 + (+) At The end of data transfer HAL_DAC_ConvCpltCallbackCh1()or HAL_DAC_ConvCpltCallbackCh2() + function is executed and user can add his own code by customization of function pointer + HAL_DAC_ConvCpltCallbackCh1 or HAL_DAC_ConvCpltCallbackCh2 + (+) In case of transfer Error, HAL_DAC_ErrorCallbackCh1() or HAL_DACEx_ErrorCallbackCh2() function is executed and user can + add his own code by customization of function pointer HAL_DAC_ErrorCallbackCh1 or HAL_DACEx_ErrorCallbackCh2 + (+) For STM32F100x devices with specific feature: DMA underrun. + In case of DMA underrun, DAC interruption triggers and execute internal function HAL_DAC_IRQHandler. + HAL_DAC_DMAUnderrunCallbackCh1()or HAL_DACEx_DMAUnderrunCallbackCh2() + function is executed and user can add his own code by customization of function pointer + HAL_DAC_DMAUnderrunCallbackCh1 or HAL_DACEx_DMAUnderrunCallbackCh2 + add his own code by customization of function pointer HAL_DAC_ErrorCallbackCh1 + (+) Stop the DAC peripheral using HAL_DAC_Stop_DMA() + + *** DAC HAL driver macros list *** + ============================================= + [..] + Below the list of most used macros in DAC HAL driver. + + (+) __HAL_DAC_ENABLE : Enable the DAC peripheral + (+) __HAL_DAC_DISABLE : Disable the DAC peripheral + (+) __HAL_DAC_CLEAR_FLAG: Clear the DAC's pending flags + (+) __HAL_DAC_GET_FLAG: Get the selected DAC's flag status + + [..] + (@) You can refer to the DAC HAL driver header file for more useful macros + + @endverbatim + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_hal.h" + +/** @addtogroup STM32L1xx_HAL_Driver + * @{ + */ + +/** @defgroup DAC DAC + * @brief DAC driver modules + * @{ + */ + +#ifdef HAL_DAC_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup DAC_Private_Functions DAC Private Functions + * @{ + */ +static void DAC_DMAConvCpltCh1(DMA_HandleTypeDef *hdma); +static void DAC_DMAErrorCh1(DMA_HandleTypeDef *hdma); +static void DAC_DMAHalfConvCpltCh1(DMA_HandleTypeDef *hdma); + +/** + * @} + */ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup DAC_Exported_Functions DAC Exported Functions + * @{ + */ + +/** @defgroup DAC_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + ============================================================================== + ##### Initialization and de-initialization functions ##### + ============================================================================== + [..] This section provides functions allowing to: + (+) Initialize and configure the DAC. + (+) De-initialize the DAC. + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the DAC peripheral according to the specified parameters + * in the DAC_InitStruct. + * @param hdac: pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DAC_Init(DAC_HandleTypeDef* hdac) +{ + /* Check DAC handle */ + if(hdac == NULL) + { + return HAL_ERROR; + } + /* Check the parameters */ + assert_param(IS_DAC_ALL_INSTANCE(hdac->Instance)); + + if(hdac->State == HAL_DAC_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hdac->Lock = HAL_UNLOCKED; + + /* Init the low level hardware */ + HAL_DAC_MspInit(hdac); + } + + /* Initialize the DAC state*/ + hdac->State = HAL_DAC_STATE_BUSY; + + /* Set DAC error code to none */ + hdac->ErrorCode = HAL_DAC_ERROR_NONE; + + /* Initialize the DAC state*/ + hdac->State = HAL_DAC_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Deinitializes the DAC peripheral registers to their default reset values. + * @param hdac: pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DAC_DeInit(DAC_HandleTypeDef* hdac) +{ + /* Check DAC handle */ + if(hdac == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_DAC_ALL_INSTANCE(hdac->Instance)); + + /* Change DAC state */ + hdac->State = HAL_DAC_STATE_BUSY; + + /* DeInit the low level hardware */ + HAL_DAC_MspDeInit(hdac); + + /* Set DAC error code to none */ + hdac->ErrorCode = HAL_DAC_ERROR_NONE; + + /* Change DAC state */ + hdac->State = HAL_DAC_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(hdac); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Initializes the DAC MSP. + * @param hdac: pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @retval None + */ +__weak void HAL_DAC_MspInit(DAC_HandleTypeDef* hdac) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hdac); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_DAC_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes the DAC MSP. + * @param hdac: pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @retval None + */ +__weak void HAL_DAC_MspDeInit(DAC_HandleTypeDef* hdac) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hdac); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_DAC_MspDeInit could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup DAC_Exported_Functions_Group2 IO operation functions + * @brief IO operation functions + * +@verbatim + ============================================================================== + ##### IO operation functions ##### + ============================================================================== + [..] This section provides functions allowing to: + (+) Start conversion. + (+) Stop conversion. + (+) Start conversion and enable DMA transfer. + (+) Stop conversion and disable DMA transfer. + (+) Get result of conversion. + +@endverbatim + * @{ + */ + +/** + * @brief Enables DAC and starts conversion of channel. + * @param hdac: pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @param Channel: The selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_CHANNEL_1: DAC Channel1 selected + * @arg DAC_CHANNEL_2: DAC Channel2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DAC_Start(DAC_HandleTypeDef* hdac, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_DAC_CHANNEL(Channel)); + + /* Process locked */ + __HAL_LOCK(hdac); + + /* Change DAC state */ + hdac->State = HAL_DAC_STATE_BUSY; + + /* Enable the Peripharal */ + __HAL_DAC_ENABLE(hdac, Channel); + + if(Channel == DAC_CHANNEL_1) + { + /* Check if software trigger enabled */ + if((hdac->Instance->CR & (DAC_CR_TEN1 | DAC_CR_TSEL1)) == (DAC_CR_TEN1 | DAC_CR_TSEL1)) + { + /* Enable the selected DAC software conversion */ + SET_BIT(hdac->Instance->SWTRIGR, DAC_SWTRIGR_SWTRIG1); + } + } + else + { + /* Check if software trigger enabled */ + if((hdac->Instance->CR & (DAC_CR_TEN2 | DAC_CR_TSEL2)) == (DAC_CR_TEN2 | DAC_CR_TSEL2)) + { + /* Enable the selected DAC software conversion*/ + SET_BIT(hdac->Instance->SWTRIGR, DAC_SWTRIGR_SWTRIG2); + } + } + + /* Change DAC state */ + hdac->State = HAL_DAC_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hdac); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Disables DAC and stop conversion of channel. + * @param hdac: pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @param Channel: The selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_CHANNEL_1: DAC Channel1 selected + * @arg DAC_CHANNEL_2: DAC Channel2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DAC_Stop(DAC_HandleTypeDef* hdac, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_DAC_CHANNEL(Channel)); + + /* Disable the Peripheral */ + __HAL_DAC_DISABLE(hdac, Channel); + + /* Change DAC state */ + hdac->State = HAL_DAC_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Enables DAC and starts conversion of channel. + * @param hdac: pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @param Channel: The selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_CHANNEL_1: DAC Channel1 selected + * @arg DAC_CHANNEL_2: DAC Channel2 selected + * @param pData: The destination peripheral Buffer address. + * @param Length: The length of data to be transferred from memory to DAC peripheral + * @param Alignment: Specifies the data alignment for DAC channel. + * This parameter can be one of the following values: + * @arg DAC_ALIGN_8B_R: 8bit right data alignment selected + * @arg DAC_ALIGN_12B_L: 12bit left data alignment selected + * @arg DAC_ALIGN_12B_R: 12bit right data alignment selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DAC_Start_DMA(DAC_HandleTypeDef* hdac, uint32_t Channel, uint32_t* pData, uint32_t Length, uint32_t Alignment) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_DAC_CHANNEL(Channel)); + assert_param(IS_DAC_ALIGN(Alignment)); + + /* Process locked */ + __HAL_LOCK(hdac); + + /* Change DAC state */ + hdac->State = HAL_DAC_STATE_BUSY; + + if(Channel == DAC_CHANNEL_1) + { + /* Set the DMA transfer complete callback for channel1 */ + hdac->DMA_Handle1->XferCpltCallback = DAC_DMAConvCpltCh1; + + /* Set the DMA half transfer complete callback for channel1 */ + hdac->DMA_Handle1->XferHalfCpltCallback = DAC_DMAHalfConvCpltCh1; + + /* Set the DMA error callback for channel1 */ + hdac->DMA_Handle1->XferErrorCallback = DAC_DMAErrorCh1; + + /* Enable the selected DAC channel1 DMA request */ + SET_BIT(hdac->Instance->CR, DAC_CR_DMAEN1); + + /* Case of use of channel 1 */ + switch(Alignment) + { + case DAC_ALIGN_12B_R: + /* Get DHR12R1 address */ + tmpreg = (uint32_t)&hdac->Instance->DHR12R1; + break; + case DAC_ALIGN_12B_L: + /* Get DHR12L1 address */ + tmpreg = (uint32_t)&hdac->Instance->DHR12L1; + break; + case DAC_ALIGN_8B_R: + /* Get DHR8R1 address */ + tmpreg = (uint32_t)&hdac->Instance->DHR8R1; + break; + default: + break; + } + } + else + { + /* Set the DMA transfer complete callback for channel2 */ + hdac->DMA_Handle2->XferCpltCallback = DAC_DMAConvCpltCh2; + + /* Set the DMA half transfer complete callback for channel2 */ + hdac->DMA_Handle2->XferHalfCpltCallback = DAC_DMAHalfConvCpltCh2; + + /* Set the DMA error callback for channel2 */ + hdac->DMA_Handle2->XferErrorCallback = DAC_DMAErrorCh2; + + /* Enable the selected DAC channel2 DMA request */ + SET_BIT(hdac->Instance->CR, DAC_CR_DMAEN2); + + /* Case of use of channel 2 */ + switch(Alignment) + { + case DAC_ALIGN_12B_R: + /* Get DHR12R2 address */ + tmpreg = (uint32_t)&hdac->Instance->DHR12R2; + break; + case DAC_ALIGN_12B_L: + /* Get DHR12L2 address */ + tmpreg = (uint32_t)&hdac->Instance->DHR12L2; + break; + case DAC_ALIGN_8B_R: + /* Get DHR8R2 address */ + tmpreg = (uint32_t)&hdac->Instance->DHR8R2; + break; + default: + break; + } + } + + /* Enable the DMA channel */ + if(Channel == DAC_CHANNEL_1) + { + /* Enable the DAC DMA underrun interrupt */ + __HAL_DAC_ENABLE_IT(hdac, DAC_IT_DMAUDR1); + + /* Enable the DMA channel */ + HAL_DMA_Start_IT(hdac->DMA_Handle1, (uint32_t)pData, tmpreg, Length); + } + else + { + /* Enable the DAC DMA underrun interrupt */ + __HAL_DAC_ENABLE_IT(hdac, DAC_IT_DMAUDR2); + + /* Enable the DMA channel */ + HAL_DMA_Start_IT(hdac->DMA_Handle2, (uint32_t)pData, tmpreg, Length); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hdac); + + /* Enable the Peripharal */ + __HAL_DAC_ENABLE(hdac, Channel); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Disables DAC and stop conversion of channel. + * @param hdac: pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @param Channel: The selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_CHANNEL_1: DAC Channel1 selected + * @arg DAC_CHANNEL_2: DAC Channel2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DAC_Stop_DMA(DAC_HandleTypeDef* hdac, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_DAC_CHANNEL(Channel)); + + /* Disable the selected DAC channel DMA request */ + CLEAR_BIT(hdac->Instance->CR, DAC_CR_DMAEN1 << Channel); + + /* Disable the Peripharal */ + __HAL_DAC_DISABLE(hdac, Channel); + + /* Disable the DMA Channel */ + /* Channel1 is used */ + if (Channel == DAC_CHANNEL_1) + { + status = HAL_DMA_Abort(hdac->DMA_Handle1); + } + else /* Channel2 is used for */ + { + status = HAL_DMA_Abort(hdac->DMA_Handle2); + } + + /* Check if DMA Channel effectively disabled */ + if (status != HAL_OK) + { + /* Update ADC state machine to error */ + hdac->State = HAL_DAC_STATE_ERROR; + } + else + { + /* Change DAC state */ + hdac->State = HAL_DAC_STATE_READY; + } + + /* Return function status */ + return status; +} + +/** + * @brief Returns the last data output value of the selected DAC channel. + * @param hdac: pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @param Channel: The selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_CHANNEL_1: DAC Channel1 selected + * @arg DAC_CHANNEL_2: DAC Channel2 selected + * @retval The selected DAC channel data output value. + */ +uint32_t HAL_DAC_GetValue(DAC_HandleTypeDef* hdac, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_DAC_CHANNEL(Channel)); + + /* Returns the DAC channel data output register value */ + if(Channel == DAC_CHANNEL_1) + { + return hdac->Instance->DOR1; + } + else + { + return hdac->Instance->DOR2; + } +} + +/** + * @brief Handles DAC interrupt request + * @param hdac: pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @retval None + */ +void HAL_DAC_IRQHandler(DAC_HandleTypeDef* hdac) +{ + /* Check underrun flag of DAC channel 1 */ + if(__HAL_DAC_GET_FLAG(hdac, DAC_FLAG_DMAUDR1)) + { + /* Change DAC state to error state */ + hdac->State = HAL_DAC_STATE_ERROR; + + /* Set DAC error code to chanel1 DMA underrun error */ + hdac->ErrorCode |= HAL_DAC_ERROR_DMAUNDERRUNCH1; + + /* Clear the underrun flag */ + __HAL_DAC_CLEAR_FLAG(hdac,DAC_FLAG_DMAUDR1); + + /* Disable the selected DAC channel1 DMA request */ + hdac->Instance->CR &= ~DAC_CR_DMAEN1; + + /* Error callback */ + HAL_DAC_DMAUnderrunCallbackCh1(hdac); + } + + /* Check underrun flag of DAC channel 2 */ + if(__HAL_DAC_GET_FLAG(hdac, DAC_FLAG_DMAUDR2)) + { + /* Change DAC state to error state */ + hdac->State = HAL_DAC_STATE_ERROR; + + /* Set DAC error code to channel2 DMA underrun error */ + hdac->ErrorCode |= HAL_DAC_ERROR_DMAUNDERRUNCH2; + + /* Clear the underrun flag */ + __HAL_DAC_CLEAR_FLAG(hdac,DAC_FLAG_DMAUDR2); + + /* Disable the selected DAC channel1 DMA request */ + hdac->Instance->CR &= ~DAC_CR_DMAEN2; + + /* Error callback */ + HAL_DACEx_DMAUnderrunCallbackCh2(hdac); + } +} + +/** + * @brief Conversion complete callback in non blocking mode for Channel1 + * @param hdac: pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @retval None + */ +__weak void HAL_DAC_ConvCpltCallbackCh1(DAC_HandleTypeDef* hdac) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hdac); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_DAC_ConvCpltCallbackCh1 could be implemented in the user file + */ +} + +/** + * @brief Conversion half DMA transfer callback in non blocking mode for Channel1 + * @param hdac: pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @retval None + */ +__weak void HAL_DAC_ConvHalfCpltCallbackCh1(DAC_HandleTypeDef* hdac) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hdac); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_DAC_ConvHalfCpltCallbackCh1 could be implemented in the user file + */ +} + +/** + * @brief Error DAC callback for Channel1. + * @param hdac: pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @retval None + */ +__weak void HAL_DAC_ErrorCallbackCh1(DAC_HandleTypeDef *hdac) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hdac); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_DAC_ErrorCallbackCh1 could be implemented in the user file + */ +} + +/** + * @brief DMA underrun DAC callback for channel1. + * @param hdac: pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @retval None + */ +__weak void HAL_DAC_DMAUnderrunCallbackCh1(DAC_HandleTypeDef *hdac) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hdac); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_DAC_DMAUnderrunCallbackCh1 could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup DAC_Exported_Functions_Group3 Peripheral Control functions + * @brief Peripheral Control functions + * +@verbatim + ============================================================================== + ##### Peripheral Control functions ##### + ============================================================================== + [..] This section provides functions allowing to: + (+) Configure channels. + (+) Set the specified data holding register value for DAC channel. + +@endverbatim + * @{ + */ + +/** + * @brief Configures the selected DAC channel. + * @param hdac: pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @param sConfig: DAC configuration structure. + * @param Channel: The selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_CHANNEL_1: DAC Channel1 selected + * @arg DAC_CHANNEL_2: DAC Channel2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DAC_ConfigChannel(DAC_HandleTypeDef* hdac, DAC_ChannelConfTypeDef* sConfig, uint32_t Channel) +{ + uint32_t tmpreg1 = 0; + + /* Check the DAC parameters */ + assert_param(IS_DAC_TRIGGER(sConfig->DAC_Trigger)); + assert_param(IS_DAC_OUTPUT_BUFFER_STATE(sConfig->DAC_OutputBuffer)); + assert_param(IS_DAC_CHANNEL(Channel)); + + /* Process locked */ + __HAL_LOCK(hdac); + + /* Change DAC state */ + hdac->State = HAL_DAC_STATE_BUSY; + + /* Configure for the selected DAC channel: buffer output, trigger */ + /* Set TSELx and TENx bits according to DAC_Trigger value */ + /* Set BOFFx bit according to DAC_OutputBuffer value */ + SET_BIT(tmpreg1, (sConfig->DAC_Trigger | sConfig->DAC_OutputBuffer)); + + /* Clear BOFFx, TENx, TSELx, WAVEx and MAMPx bits */ + /* Calculate CR register value depending on DAC_Channel */ + MODIFY_REG(hdac->Instance->CR, + ((uint32_t)(DAC_CR_MAMP1 | DAC_CR_WAVE1 | DAC_CR_TSEL1 | DAC_CR_TEN1 | DAC_CR_BOFF1)) << Channel, + tmpreg1 << Channel); + + /* Disable wave generation */ + hdac->Instance->CR &= ~(DAC_CR_WAVE1 << Channel); + + /* Change DAC state */ + hdac->State = HAL_DAC_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hdac); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Set the specified data holding register value for DAC channel. + * @param hdac: pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @param Channel: The selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_CHANNEL_1: DAC Channel1 selected + * @arg DAC_CHANNEL_2: DAC Channel2 selected + * @param Alignment: Specifies the data alignment. + * This parameter can be one of the following values: + * @arg DAC_ALIGN_8B_R: 8bit right data alignment selected + * @arg DAC_ALIGN_12B_L: 12bit left data alignment selected + * @arg DAC_ALIGN_12B_R: 12bit right data alignment selected + * @param Data: Data to be loaded in the selected data holding register. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DAC_SetValue(DAC_HandleTypeDef* hdac, uint32_t Channel, uint32_t Alignment, uint32_t Data) +{ + __IO uint32_t tmp = 0; + + /* Check the parameters */ + assert_param(IS_DAC_CHANNEL(Channel)); + assert_param(IS_DAC_ALIGN(Alignment)); + assert_param(IS_DAC_DATA(Data)); + + tmp = (uint32_t)hdac->Instance; + if(Channel == DAC_CHANNEL_1) + { + tmp += DAC_DHR12R1_ALIGNMENT(Alignment); + } + else + { + tmp += DAC_DHR12R2_ALIGNMENT(Alignment); + } + + /* Set the DAC channel selected data holding register */ + *(__IO uint32_t *) tmp = Data; + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup DAC_Exported_Functions_Group4 Peripheral State and Errors functions + * @brief Peripheral State and Errors functions + * +@verbatim + ============================================================================== + ##### Peripheral State and Errors functions ##### + ============================================================================== + [..] + This subsection provides functions allowing to + (+) Check the DAC state. + (+) Check the DAC Errors. + +@endverbatim + * @{ + */ + +/** + * @brief return the DAC state + * @param hdac: pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @retval HAL state + */ +HAL_DAC_StateTypeDef HAL_DAC_GetState(DAC_HandleTypeDef* hdac) +{ + /* Return DAC state */ + return hdac->State; +} + + +/** + * @brief Return the DAC error code + * @param hdac: pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @retval DAC Error Code + */ +uint32_t HAL_DAC_GetError(DAC_HandleTypeDef *hdac) +{ + return hdac->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup DAC_Private_Functions + * @{ + */ + +/** + * @brief DMA conversion complete callback. + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void DAC_DMAConvCpltCh1(DMA_HandleTypeDef *hdma) +{ + DAC_HandleTypeDef* hdac = ( DAC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; + + HAL_DAC_ConvCpltCallbackCh1(hdac); + + hdac->State = HAL_DAC_STATE_READY; +} + +/** + * @brief DMA half transfer complete callback. + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void DAC_DMAHalfConvCpltCh1(DMA_HandleTypeDef *hdma) +{ + DAC_HandleTypeDef* hdac = ( DAC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; + /* Conversion complete callback */ + HAL_DAC_ConvHalfCpltCallbackCh1(hdac); +} + +/** + * @brief DMA error callback + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void DAC_DMAErrorCh1(DMA_HandleTypeDef *hdma) +{ + DAC_HandleTypeDef* hdac = ( DAC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; + + /* Set DAC error code to DMA error */ + hdac->ErrorCode |= HAL_DAC_ERROR_DMA; + + HAL_DAC_ErrorCallbackCh1(hdac); + + hdac->State = HAL_DAC_STATE_READY; +} + +/** + * @} + */ + +#endif /* HAL_DAC_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_dac_ex.c b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_dac_ex.c new file mode 100755 index 0000000..b09b079 --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_dac_ex.c @@ -0,0 +1,394 @@ +/** + ****************************************************************************** + * @file stm32l1xx_hal_dac_ex.c + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief DAC HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of DAC extension peripheral: + * + Extended features functions + * + * + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + (+) When Dual mode is enabled (i.e DAC Channel1 and Channel2 are used simultaneously) : + Use HAL_DACEx_DualGetValue() to get digital data to be converted and use + HAL_DACEx_DualSetValue() to set digital value to converted simultaneously in Channel 1 and Channel 2. + (+) Use HAL_DACEx_TriangleWaveGenerate() to generate Triangle signal. + (+) Use HAL_DACEx_NoiseWaveGenerate() to generate Noise signal. + + @endverbatim + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_hal.h" + +/** @addtogroup STM32L1xx_HAL_Driver + * @{ + */ + +/** @defgroup DACEx DACEx + * @brief DAC driver modules + * @{ + */ + +#ifdef HAL_DAC_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup DACEx_Exported_Functions DACEx Exported Functions + * @{ + */ + +/** @defgroup DACEx_Exported_Functions_Group1 Extended features functions + * @brief Extended features functions + * +@verbatim + ============================================================================== + ##### Extended features functions ##### + ============================================================================== + [..] This section provides functions allowing to: + (+) Start conversion. + (+) Stop conversion. + (+) Start conversion and enable DMA transfer. + (+) Stop conversion and disable DMA transfer. + (+) Get result of conversion. + (+) Get result of dual mode conversion. + +@endverbatim + * @{ + */ + +/** + * @brief Returns the last data output value of the selected DAC channel. + * @param hdac: pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @retval The selected DAC channel data output value. + */ +uint32_t HAL_DACEx_DualGetValue(DAC_HandleTypeDef* hdac) +{ + uint32_t tmp = 0; + + tmp |= hdac->Instance->DOR1; + + tmp |= hdac->Instance->DOR2 << 16; + + /* Returns the DAC channel data output register value */ + return tmp; +} + +/** + * @brief Enables or disables the selected DAC channel wave generation. + * @param hdac: pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @param Channel: The selected DAC channel. + * This parameter can be one of the following values: + * DAC_CHANNEL_1 / DAC_CHANNEL_2 + * @param Amplitude: Select max triangle amplitude. + * This parameter can be one of the following values: + * @arg DAC_TRIANGLEAMPLITUDE_1: Select max triangle amplitude of 1 + * @arg DAC_TRIANGLEAMPLITUDE_3: Select max triangle amplitude of 3 + * @arg DAC_TRIANGLEAMPLITUDE_7: Select max triangle amplitude of 7 + * @arg DAC_TRIANGLEAMPLITUDE_15: Select max triangle amplitude of 15 + * @arg DAC_TRIANGLEAMPLITUDE_31: Select max triangle amplitude of 31 + * @arg DAC_TRIANGLEAMPLITUDE_63: Select max triangle amplitude of 63 + * @arg DAC_TRIANGLEAMPLITUDE_127: Select max triangle amplitude of 127 + * @arg DAC_TRIANGLEAMPLITUDE_255: Select max triangle amplitude of 255 + * @arg DAC_TRIANGLEAMPLITUDE_511: Select max triangle amplitude of 511 + * @arg DAC_TRIANGLEAMPLITUDE_1023: Select max triangle amplitude of 1023 + * @arg DAC_TRIANGLEAMPLITUDE_2047: Select max triangle amplitude of 2047 + * @arg DAC_TRIANGLEAMPLITUDE_4095: Select max triangle amplitude of 4095 + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DACEx_TriangleWaveGenerate(DAC_HandleTypeDef* hdac, uint32_t Channel, uint32_t Amplitude) +{ + /* Check the parameters */ + assert_param(IS_DAC_CHANNEL(Channel)); + assert_param(IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(Amplitude)); + + /* Process locked */ + __HAL_LOCK(hdac); + + /* Change DAC state */ + hdac->State = HAL_DAC_STATE_BUSY; + + /* Enable the selected wave generation for the selected DAC channel */ + MODIFY_REG(hdac->Instance->CR, ((DAC_CR_WAVE1)|(DAC_CR_MAMP1))<State = HAL_DAC_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hdac); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Enables or disables the selected DAC channel wave generation. + * @param hdac: pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @param Channel: The selected DAC channel. + * This parameter can be one of the following values: + * DAC_CHANNEL_1 / DAC_CHANNEL_2 + * @param Amplitude: Unmask DAC channel LFSR for noise wave generation. + * This parameter can be one of the following values: + * @arg DAC_LFSRUNMASK_BIT0: Unmask DAC channel LFSR bit0 for noise wave generation + * @arg DAC_LFSRUNMASK_BITS1_0: Unmask DAC channel LFSR bit[1:0] for noise wave generation + * @arg DAC_LFSRUNMASK_BITS2_0: Unmask DAC channel LFSR bit[2:0] for noise wave generation + * @arg DAC_LFSRUNMASK_BITS3_0: Unmask DAC channel LFSR bit[3:0] for noise wave generation + * @arg DAC_LFSRUNMASK_BITS4_0: Unmask DAC channel LFSR bit[4:0] for noise wave generation + * @arg DAC_LFSRUNMASK_BITS5_0: Unmask DAC channel LFSR bit[5:0] for noise wave generation + * @arg DAC_LFSRUNMASK_BITS6_0: Unmask DAC channel LFSR bit[6:0] for noise wave generation + * @arg DAC_LFSRUNMASK_BITS7_0: Unmask DAC channel LFSR bit[7:0] for noise wave generation + * @arg DAC_LFSRUNMASK_BITS8_0: Unmask DAC channel LFSR bit[8:0] for noise wave generation + * @arg DAC_LFSRUNMASK_BITS9_0: Unmask DAC channel LFSR bit[9:0] for noise wave generation + * @arg DAC_LFSRUNMASK_BITS10_0: Unmask DAC channel LFSR bit[10:0] for noise wave generation + * @arg DAC_LFSRUNMASK_BITS11_0: Unmask DAC channel LFSR bit[11:0] for noise wave generation + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DACEx_NoiseWaveGenerate(DAC_HandleTypeDef* hdac, uint32_t Channel, uint32_t Amplitude) +{ + /* Check the parameters */ + assert_param(IS_DAC_CHANNEL(Channel)); + assert_param(IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(Amplitude)); + + /* Process locked */ + __HAL_LOCK(hdac); + + /* Change DAC state */ + hdac->State = HAL_DAC_STATE_BUSY; + + /* Enable the selected wave generation for the selected DAC channel */ + MODIFY_REG(hdac->Instance->CR, ((DAC_CR_WAVE1)|(DAC_CR_MAMP1))<State = HAL_DAC_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hdac); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Set the specified data holding register value for dual DAC channel. + * @param hdac: pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @param Alignment: Specifies the data alignment for dual channel DAC. + * This parameter can be one of the following values: + * DAC_ALIGN_8B_R: 8bit right data alignment selected + * DAC_ALIGN_12B_L: 12bit left data alignment selected + * DAC_ALIGN_12B_R: 12bit right data alignment selected + * @param Data1: Data for DAC Channel2 to be loaded in the selected data holding register. + * @param Data2: Data for DAC Channel1 to be loaded in the selected data holding register. + * @note In dual mode, a unique register access is required to write in both + * DAC channels at the same time. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DACEx_DualSetValue(DAC_HandleTypeDef* hdac, uint32_t Alignment, uint32_t Data1, uint32_t Data2) +{ + uint32_t data = 0, tmp = 0; + + /* Check the parameters */ + assert_param(IS_DAC_ALIGN(Alignment)); + assert_param(IS_DAC_DATA(Data1)); + assert_param(IS_DAC_DATA(Data2)); + + /* Calculate and set dual DAC data holding register value */ + if (Alignment == DAC_ALIGN_8B_R) + { + data = ((uint32_t)Data2 << 8) | Data1; + } + else + { + data = ((uint32_t)Data2 << 16) | Data1; + } + + tmp = (uint32_t)hdac->Instance; + tmp += DAC_DHR12RD_ALIGNMENT(Alignment); + + /* Set the dual DAC selected data holding register */ + *(__IO uint32_t *)tmp = data; + + /* Return function status */ + return HAL_OK; +} + + +/** + * @brief Conversion complete callback in non blocking mode for Channel2 + * @param hdac: pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @retval None + */ +__weak void HAL_DACEx_ConvCpltCallbackCh2(DAC_HandleTypeDef* hdac) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hdac); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_DACEx_ConvCpltCallbackCh2 could be implemented in the user file + */ +} + +/** + * @brief Conversion half DMA transfer callback in non blocking mode for Channel2 + * @param hdac: pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @retval None + */ +__weak void HAL_DACEx_ConvHalfCpltCallbackCh2(DAC_HandleTypeDef* hdac) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hdac); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_DACEx_ConvHalfCpltCallbackCh2 could be implemented in the user file + */ +} + +/** + * @brief Error DAC callback for Channel2. + * @param hdac: pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @retval None + */ +__weak void HAL_DACEx_ErrorCallbackCh2(DAC_HandleTypeDef *hdac) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hdac); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_DACEx_ErrorCallbackCh2 could be implemented in the user file + */ +} + +/** + * @brief DMA underrun DAC callback for channel2. + * @param hdac: pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @retval None + */ +__weak void HAL_DACEx_DMAUnderrunCallbackCh2(DAC_HandleTypeDef *hdac) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hdac); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_DAC_DMAUnderrunCallbackCh2 could be implemented in the user file + */ +} + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup DACEx_Private_Functions DACEx Private Functions + * @{ + */ +/** + * @brief DMA conversion complete callback. + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +void DAC_DMAConvCpltCh2(DMA_HandleTypeDef *hdma) +{ + DAC_HandleTypeDef* hdac = ( DAC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; + + HAL_DACEx_ConvCpltCallbackCh2(hdac); + + hdac->State= HAL_DAC_STATE_READY; +} + +/** + * @brief DMA half transfer complete callback. + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +void DAC_DMAHalfConvCpltCh2(DMA_HandleTypeDef *hdma) +{ + DAC_HandleTypeDef* hdac = ( DAC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; + /* Conversion complete callback */ + HAL_DACEx_ConvHalfCpltCallbackCh2(hdac); +} + +/** + * @brief DMA error callback + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +void DAC_DMAErrorCh2(DMA_HandleTypeDef *hdma) +{ + DAC_HandleTypeDef* hdac = ( DAC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; + + /* Set DAC error code to DMA error */ + hdac->ErrorCode |= HAL_DAC_ERROR_DMA; + + HAL_DACEx_ErrorCallbackCh2(hdac); + + hdac->State= HAL_DAC_STATE_READY; +} + +/** + * @} + */ + +#endif /* HAL_DAC_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_dma.c b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_dma.c new file mode 100755 index 0000000..3709968 --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_dma.c @@ -0,0 +1,915 @@ +/** + ****************************************************************************** + * @file stm32l1xx_hal_dma.c + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief DMA HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Direct Memory Access (DMA) peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral State and errors functions + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + (#) Enable and configure the peripheral to be connected to the DMA Channel + (except for internal SRAM / FLASH memories: no initialization is + necessary). Please refer to the Reference manual for connection between peripherals + and DMA requests. + + (#) For a given Channel, program the required configuration through the following parameters: + Channel request, Transfer Direction, Source and Destination data formats, + Circular or Normal mode, Channel Priority level, Source and Destination Increment mode + using HAL_DMA_Init() function. + + (#) Use HAL_DMA_GetState() function to return the DMA state and HAL_DMA_GetError() in case of error + detection. + + (#) Use HAL_DMA_Abort() function to abort the current transfer + + -@- In Memory-to-Memory transfer mode, Circular mode is not allowed. + *** Polling mode IO operation *** + ================================= + [..] + (+) Use HAL_DMA_Start() to start DMA transfer after the configuration of Source + address and destination address and the Length of data to be transferred + (+) Use HAL_DMA_PollForTransfer() to poll for the end of current transfer, in this + case a fixed Timeout can be configured by User depending from his application. + + *** Interrupt mode IO operation *** + =================================== + [..] + (+) Configure the DMA interrupt priority using HAL_NVIC_SetPriority() + (+) Enable the DMA IRQ handler using HAL_NVIC_EnableIRQ() + (+) Use HAL_DMA_Start_IT() to start DMA transfer after the configuration of + Source address and destination address and the Length of data to be transferred. + In this case the DMA interrupt is configured + (+) Use HAL_DMA_IRQHandler() called under DMA_IRQHandler() Interrupt subroutine + (+) At the end of data transfer HAL_DMA_IRQHandler() function is executed and user can + add his own function by customization of function pointer XferCpltCallback and + XferErrorCallback (i.e. a member of DMA handle structure). + + *** DMA HAL driver macros list *** + ============================================= + [..] + Below the list of most used macros in DMA HAL driver. + + (+) __HAL_DMA_ENABLE: Enable the specified DMA Channel. + (+) __HAL_DMA_DISABLE: Disable the specified DMA Channel. + (+) __HAL_DMA_GET_FLAG: Get the DMA Channel pending flags. + (+) __HAL_DMA_CLEAR_FLAG: Clear the DMA Channel pending flags. + (+) __HAL_DMA_ENABLE_IT: Enable the specified DMA Channel interrupts. + (+) __HAL_DMA_DISABLE_IT: Disable the specified DMA Channel interrupts. + (+) __HAL_DMA_GET_IT_SOURCE: Check whether the specified DMA Channel interrupt has occurred or not. + + [..] + (@) You can refer to the DMA HAL driver header file for more useful macros + + @endverbatim + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_hal.h" + +/** @addtogroup STM32L1xx_HAL_Driver + * @{ + */ + +/** @defgroup DMA DMA + * @brief DMA HAL module driver + * @{ + */ + +#ifdef HAL_DMA_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup DMA_Private_Functions DMA Private Functions + * @{ + */ +static void DMA_SetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength); + +/** + * @} + */ + +/* Exported functions ---------------------------------------------------------*/ + +/** @defgroup DMA_Exported_Functions DMA Exported Functions + * @{ + */ + +/** @defgroup DMA_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and de-initialization functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] + This section provides functions allowing to initialize the DMA Channel source + and destination addresses, incrementation and data sizes, transfer direction, + circular/normal mode selection, memory-to-memory mode selection and Channel priority value. + [..] + The HAL_DMA_Init() function follows the DMA configuration procedures as described in + reference manual. + +@endverbatim + * @{ + */ + +/** + * @brief Initialize the DMA according to the specified + * parameters in the DMA_InitTypeDef and initialize the associated handle. + * @param hdma: Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma) +{ + uint32_t tmp = 0; + + /* Check the DMA handle allocation */ + if(hdma == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance)); + assert_param(IS_DMA_DIRECTION(hdma->Init.Direction)); + assert_param(IS_DMA_PERIPHERAL_INC_STATE(hdma->Init.PeriphInc)); + assert_param(IS_DMA_MEMORY_INC_STATE(hdma->Init.MemInc)); + assert_param(IS_DMA_PERIPHERAL_DATA_SIZE(hdma->Init.PeriphDataAlignment)); + assert_param(IS_DMA_MEMORY_DATA_SIZE(hdma->Init.MemDataAlignment)); + assert_param(IS_DMA_MODE(hdma->Init.Mode)); + assert_param(IS_DMA_PRIORITY(hdma->Init.Priority)); + +#if defined (DMA2) + /* calculation of the channel index */ + if ((uint32_t)(hdma->Instance) < (uint32_t)(DMA2_Channel1)) + { + /* DMA1 */ + hdma->ChannelIndex = (((uint32_t)hdma->Instance - (uint32_t)DMA1_Channel1) / ((uint32_t)DMA1_Channel2 - (uint32_t)DMA1_Channel1)) << 2; + hdma->DmaBaseAddress = DMA1; + } + else + { + /* DMA2 */ + hdma->ChannelIndex = (((uint32_t)hdma->Instance - (uint32_t)DMA2_Channel1) / ((uint32_t)DMA2_Channel2 - (uint32_t)DMA2_Channel1)) << 2; + hdma->DmaBaseAddress = DMA2; + } +#else + /* calculation of the channel index */ + /* DMA1 */ + hdma->ChannelIndex = (((uint32_t)hdma->Instance - (uint32_t)DMA1_Channel1) / ((uint32_t)DMA1_Channel2 - (uint32_t)DMA1_Channel1)) << 2; + hdma->DmaBaseAddress = DMA1; +#endif + + /* Change DMA peripheral state */ + hdma->State = HAL_DMA_STATE_BUSY; + + /* Get the CR register value */ + tmp = hdma->Instance->CCR; + + /* Clear PL, MSIZE, PSIZE, MINC, PINC, CIRC, DIR bits */ + tmp &= ((uint32_t)~(DMA_CCR_PL | DMA_CCR_MSIZE | DMA_CCR_PSIZE | \ + DMA_CCR_MINC | DMA_CCR_PINC | DMA_CCR_CIRC | \ + DMA_CCR_DIR)); + + /* Prepare the DMA Channel configuration */ + tmp |= hdma->Init.Direction | + hdma->Init.PeriphInc | hdma->Init.MemInc | + hdma->Init.PeriphDataAlignment | hdma->Init.MemDataAlignment | + hdma->Init.Mode | hdma->Init.Priority; + + /* Write to DMA Channel CR register */ + hdma->Instance->CCR = tmp; + + /* Clean callbacks */ + hdma->XferCpltCallback = NULL; + hdma->XferHalfCpltCallback = NULL; + hdma->XferErrorCallback = NULL; + hdma->XferAbortCallback = NULL; + + /* Initialise the error code */ + hdma->ErrorCode = HAL_DMA_ERROR_NONE; + + /* Initialize the DMA state*/ + hdma->State = HAL_DMA_STATE_READY; + + /* Allocate lock resource and initialize it */ + hdma->Lock = HAL_UNLOCKED; + + return HAL_OK; +} + +/** + * @brief DeInitialize the DMA peripheral. + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_DeInit(DMA_HandleTypeDef *hdma) +{ + /* Check the DMA handle allocation */ + if (NULL == hdma ) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance)); + + /* Disable the selected DMA Channelx */ + __HAL_DMA_DISABLE(hdma); + +#if defined (DMA2) + /* calculation of the channel index */ + if ((uint32_t)(hdma->Instance) < (uint32_t)(DMA2_Channel1)) + { + /* DMA1 */ + hdma->ChannelIndex = (((uint32_t)hdma->Instance - (uint32_t)DMA1_Channel1) / ((uint32_t)DMA1_Channel2 - (uint32_t)DMA1_Channel1)) << 2; + hdma->DmaBaseAddress = DMA1; + } + else + { + /* DMA2 */ + hdma->ChannelIndex = (((uint32_t)hdma->Instance - (uint32_t)DMA2_Channel1) / ((uint32_t)DMA2_Channel2 - (uint32_t)DMA2_Channel1)) << 2; + hdma->DmaBaseAddress = DMA2; + } +#else + /* calculation of the channel index */ + /* DMA1 */ + hdma->ChannelIndex = (((uint32_t)hdma->Instance - (uint32_t)DMA1_Channel1) / ((uint32_t)DMA1_Channel2 - (uint32_t)DMA1_Channel1)) << 2; + hdma->DmaBaseAddress = DMA1; +#endif + + /* Reset DMA Channel control register */ + hdma->Instance->CCR = 0; + + /* Reset DMA Channel Number of Data to Transfer register */ + hdma->Instance->CNDTR = 0; + + /* Reset DMA Channel peripheral address register */ + hdma->Instance->CPAR = 0; + + /* Reset DMA Channel memory address register */ + hdma->Instance->CMAR = 0; + + /* Clear all flags */ + hdma->DmaBaseAddress->IFCR = ((DMA_ISR_GIF1) << (hdma->ChannelIndex)); + +/* Initialise the error code */ + hdma->ErrorCode = HAL_DMA_ERROR_NONE; + + /* Initialize the DMA state */ + hdma->State = HAL_DMA_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(hdma); + + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup DMA_Exported_Functions_Group2 Input and Output operation functions + * @brief Input and Output operation functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Configure the source, destination address and data length and Start DMA transfer + (+) Configure the source, destination address and data length and + Start DMA transfer with interrupt + (+) Abort DMA transfer + (+) Poll for transfer complete + (+) Handle DMA interrupt request + +@endverbatim + * @{ + */ + +/** + * @brief Start the DMA Transfer. + * @param hdma : pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @param SrcAddress: The source memory Buffer address + * @param DstAddress: The destination memory Buffer address + * @param DataLength: The length of data to be transferred from source to destination + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_Start(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_DMA_BUFFER_SIZE(DataLength)); + + /* Process locked */ + __HAL_LOCK(hdma); + + if(HAL_DMA_STATE_READY == hdma->State) + { + /* Change DMA peripheral state */ + hdma->State = HAL_DMA_STATE_BUSY; + hdma->ErrorCode = HAL_DMA_ERROR_NONE; + + /* Disable the peripheral */ + __HAL_DMA_DISABLE(hdma); + + /* Configure the source, destination address and the data length & clear flags*/ + DMA_SetConfig(hdma, SrcAddress, DstAddress, DataLength); + + /* Enable the Peripheral */ + __HAL_DMA_ENABLE(hdma); + } + else + { + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + status = HAL_BUSY; + } + return status; +} + +/** + * @brief Start the DMA Transfer with interrupt enabled. + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @param SrcAddress: The source memory Buffer address + * @param DstAddress: The destination memory Buffer address + * @param DataLength: The length of data to be transferred from source to destination + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_DMA_BUFFER_SIZE(DataLength)); + + /* Process locked */ + __HAL_LOCK(hdma); + + if(HAL_DMA_STATE_READY == hdma->State) + { + /* Change DMA peripheral state */ + hdma->State = HAL_DMA_STATE_BUSY; + hdma->ErrorCode = HAL_DMA_ERROR_NONE; + + /* Disable the peripheral */ + __HAL_DMA_DISABLE(hdma); + + /* Configure the source, destination address and the data length & clear flags*/ + DMA_SetConfig(hdma, SrcAddress, DstAddress, DataLength); + + /* Enable the transfer complete interrupt */ + /* Enable the transfer Error interrupt */ + if(NULL != hdma->XferHalfCpltCallback ) + { + /* Enable the Half transfer complete interrupt as well */ + __HAL_DMA_ENABLE_IT(hdma, (DMA_IT_TC | DMA_IT_HT | DMA_IT_TE)); + } + else + { + __HAL_DMA_DISABLE_IT(hdma, DMA_IT_HT); + __HAL_DMA_ENABLE_IT(hdma, (DMA_IT_TC | DMA_IT_TE)); + } + /* Enable the Peripheral */ + __HAL_DMA_ENABLE(hdma); + } + else + { + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + /* Remain BUSY */ + status = HAL_BUSY; + } + return status; +} + +/** + * @brief Abort the DMA Transfer. + * @param hdma : pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Disable DMA IT */ + __HAL_DMA_DISABLE_IT(hdma, (DMA_IT_TC | DMA_IT_HT | DMA_IT_TE)); + + /* Disable the channel */ + __HAL_DMA_DISABLE(hdma); + + /* Clear all flags */ + hdma->DmaBaseAddress->IFCR = ((DMA_ISR_GIF1) << (hdma->ChannelIndex)); + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + return status; +} + +/** + * @brief Aborts the DMA Transfer in Interrupt mode. + * @param hdma : pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Stream. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_Abort_IT(DMA_HandleTypeDef *hdma) +{ + HAL_StatusTypeDef status = HAL_OK; + + if(HAL_DMA_STATE_BUSY != hdma->State) + { + /* no transfer ongoing */ + hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER; + + status = HAL_ERROR; + } + else + { + /* Disable DMA IT */ + __HAL_DMA_DISABLE_IT(hdma, (DMA_IT_TC | DMA_IT_HT | DMA_IT_TE)); + + /* Disable the channel */ + __HAL_DMA_DISABLE(hdma); + + /* Clear all flags */ + hdma->DmaBaseAddress->IFCR = ((DMA_ISR_GIF1) << (hdma->ChannelIndex)); + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + /* Call User Abort callback */ + if(hdma->XferAbortCallback != NULL) + { + hdma->XferAbortCallback(hdma); + } + } + return status; +} + +/** + * @brief Polling for transfer complete. + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @param CompleteLevel: Specifies the DMA level complete. + * @param Timeout: Timeout duration. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, uint32_t CompleteLevel, uint32_t Timeout) +{ + uint32_t temp; + uint32_t tickstart = 0; + + if(HAL_DMA_STATE_BUSY != hdma->State) + { + /* no transfer ongoing */ + hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER; + __HAL_UNLOCK(hdma); + return HAL_ERROR; + } + + /* Polling mode not supported in circular mode */ + if (RESET != (hdma->Instance->CCR & DMA_CCR_CIRC)) + { + hdma->ErrorCode = HAL_DMA_ERROR_NOT_SUPPORTED; + return HAL_ERROR; + } + + /* Get the level transfer complete flag */ + if (HAL_DMA_FULL_TRANSFER == CompleteLevel) + { + /* Transfer Complete flag */ + temp = DMA_FLAG_TC1 << hdma->ChannelIndex; + } + else + { + /* Half Transfer Complete flag */ + temp = DMA_FLAG_HT1 << hdma->ChannelIndex; + } + + /* Get tick */ + tickstart = HAL_GetTick(); + + while(RESET == (hdma->DmaBaseAddress->ISR & temp)) + { + if((RESET != (hdma->DmaBaseAddress->ISR & (DMA_FLAG_TE1 << hdma->ChannelIndex)))) + { + /* When a DMA transfer error occurs */ + /* A hardware clear of its EN bits is performed */ + /* Clear all flags */ + hdma->DmaBaseAddress->IFCR = ((DMA_ISR_GIF1) << (hdma->ChannelIndex)); + + /* Update error code */ + hdma->ErrorCode = HAL_DMA_ERROR_TE; + + /* Change the DMA state */ + hdma->State= HAL_DMA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + return HAL_ERROR; + } + /* Check for the Timeout */ + if(Timeout != HAL_MAX_DELAY) + { + if((Timeout == 0) || ((HAL_GetTick() - tickstart) > Timeout)) + { + /* Update error code */ + hdma->ErrorCode = HAL_DMA_ERROR_TIMEOUT; + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + return HAL_ERROR; + } + } + } + + if(HAL_DMA_FULL_TRANSFER == CompleteLevel) + { + /* Clear the transfer complete flag */ + hdma->DmaBaseAddress->IFCR = (DMA_FLAG_TC1 << hdma->ChannelIndex); + + /* The selected Channelx EN bit is cleared (DMA is disabled and + all transfers are complete) */ + hdma->State = HAL_DMA_STATE_READY; + } + else + { + /* Clear the half transfer complete flag */ + hdma->DmaBaseAddress->IFCR = (DMA_FLAG_HT1 << hdma->ChannelIndex); + } + + /* Process unlocked */ + __HAL_UNLOCK(hdma); + + return HAL_OK; +} + +/** + * @brief Handle DMA interrupt request. + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @retval None + */ +void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma) +{ + uint32_t flag_it = hdma->DmaBaseAddress->ISR; + uint32_t source_it = hdma->Instance->CCR; + + /* Half Transfer Complete Interrupt management ******************************/ + if ((RESET != (flag_it & (DMA_FLAG_HT1 << hdma->ChannelIndex))) && (RESET != (source_it & DMA_IT_HT))) + { + /* Disable the half transfer interrupt if the DMA mode is not CIRCULAR */ + if((hdma->Instance->CCR & DMA_CCR_CIRC) == 0) + { + /* Disable the half transfer interrupt */ + __HAL_DMA_DISABLE_IT(hdma, DMA_IT_HT); + } + /* Clear the half transfer complete flag */ + hdma->DmaBaseAddress->IFCR = (DMA_ISR_HTIF1 << hdma->ChannelIndex); + + /* DMA peripheral state is not updated in Half Transfer */ + /* but in Transfer Complete case */ + + if(hdma->XferHalfCpltCallback != NULL) + { + /* Half transfer callback */ + hdma->XferHalfCpltCallback(hdma); + } + } + + /* Transfer Complete Interrupt management ***********************************/ + else if ((RESET != (flag_it & (DMA_FLAG_TC1 << hdma->ChannelIndex))) && (RESET != (source_it & DMA_IT_TC))) + { + if((hdma->Instance->CCR & DMA_CCR_CIRC) == 0) + { + /* Disable TE & TC */ + __HAL_DMA_DISABLE_IT(hdma, DMA_IT_TE | DMA_IT_TC); + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_READY; + } + + /* Clear the transfer complete flag */ + hdma->DmaBaseAddress->IFCR = (DMA_ISR_TCIF1 << hdma->ChannelIndex); + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + if(hdma->XferCpltCallback != NULL) + { + /* Transfer complete callback */ + hdma->XferCpltCallback(hdma); + } + } + + /* Transfer Error Interrupt management **************************************/ + else if (( RESET != (flag_it & (DMA_FLAG_TE1 << hdma->ChannelIndex))) && (RESET != (source_it & DMA_IT_TE))) + { + /* When a DMA transfer error occurs */ + /* A hardware clear of its EN bits is performed */ + /* Disable ALL DMA IT */ + __HAL_DMA_DISABLE_IT(hdma, (DMA_IT_TC | DMA_IT_HT | DMA_IT_TE)); + + /* Clear all flags */ + hdma->DmaBaseAddress->IFCR = (DMA_ISR_GIF1 << hdma->ChannelIndex); + + /* Update error code */ + hdma->ErrorCode = HAL_DMA_ERROR_TE; + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + if (hdma->XferErrorCallback != NULL) + { + /* Transfer error callback */ + hdma->XferErrorCallback(hdma); + } + } + return; +} + +/** + * @brief Register callbacks + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Stream. + * @param CallbackID: User Callback identifer + * a HAL_DMA_CallbackIDTypeDef ENUM as parameter. + * @param pCallback: pointer to private callbacsk function which has pointer to + * a DMA_HandleTypeDef structure as parameter. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_RegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID, void (* pCallback)( DMA_HandleTypeDef * _hdma)) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hdma); + + if(HAL_DMA_STATE_READY == hdma->State) + { + switch (CallbackID) + { + case HAL_DMA_XFER_CPLT_CB_ID: + hdma->XferCpltCallback = pCallback; + break; + + case HAL_DMA_XFER_HALFCPLT_CB_ID: + hdma->XferHalfCpltCallback = pCallback; + break; + + case HAL_DMA_XFER_ERROR_CB_ID: + hdma->XferErrorCallback = pCallback; + break; + + case HAL_DMA_XFER_ABORT_CB_ID: + hdma->XferAbortCallback = pCallback; + break; + + default: + status = HAL_ERROR; + break; + } + } + else + { + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hdma); + + return status; +} + +/** + * @brief UnRegister callbacks + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Stream. + * @param CallbackID: User Callback identifer + * a HAL_DMA_CallbackIDTypeDef ENUM as parameter. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_UnRegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hdma); + + if(HAL_DMA_STATE_READY == hdma->State) + { + switch (CallbackID) + { + case HAL_DMA_XFER_CPLT_CB_ID: + hdma->XferCpltCallback = NULL; + break; + + case HAL_DMA_XFER_HALFCPLT_CB_ID: + hdma->XferHalfCpltCallback = NULL; + break; + + case HAL_DMA_XFER_ERROR_CB_ID: + hdma->XferErrorCallback = NULL; + break; + + case HAL_DMA_XFER_ABORT_CB_ID: + hdma->XferAbortCallback = NULL; + break; + + case HAL_DMA_XFER_ALL_CB_ID: + hdma->XferCpltCallback = NULL; + hdma->XferHalfCpltCallback = NULL; + hdma->XferErrorCallback = NULL; + hdma->XferAbortCallback = NULL; + break; + + default: + status = HAL_ERROR; + break; + } + } + else + { + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hdma); + + return status; +} + +/** + * @} + */ + + + +/** @defgroup DMA_Exported_Functions_Group3 Peripheral State and Errors functions + * @brief Peripheral State and Errors functions + * +@verbatim + =============================================================================== + ##### Peripheral State and Errors functions ##### + =============================================================================== + [..] + This subsection provides functions allowing to + (+) Check the DMA state + (+) Get error code + +@endverbatim + * @{ + */ + +/** + * @brief Return the DMA hande state. + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @retval HAL state + */ +HAL_DMA_StateTypeDef HAL_DMA_GetState(DMA_HandleTypeDef *hdma) +{ + /* Return DMA handle state */ + return hdma->State; +} + +/** + * @brief Return the DMA error code. + * @param hdma : pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @retval DMA Error Code + */ +uint32_t HAL_DMA_GetError(DMA_HandleTypeDef *hdma) +{ + return hdma->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup DMA_Private_Functions + * @{ + */ + +/** + * @brief Sets the DMA Transfer parameter. + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @param SrcAddress: The source memory Buffer address + * @param DstAddress: The destination memory Buffer address + * @param DataLength: The length of data to be transferred from source to destination + * @retval HAL status + */ +static void DMA_SetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength) +{ + /* Clear all flags */ + hdma->DmaBaseAddress->IFCR = (DMA_ISR_GIF1 << hdma->ChannelIndex); + + /* Configure DMA Channel data length */ + hdma->Instance->CNDTR = DataLength; + + /* Peripheral to Memory */ + if((hdma->Init.Direction) == DMA_MEMORY_TO_PERIPH) + { + /* Configure DMA Channel destination address */ + hdma->Instance->CPAR = DstAddress; + + /* Configure DMA Channel source address */ + hdma->Instance->CMAR = SrcAddress; + } + /* Memory to Peripheral */ + else + { + /* Configure DMA Channel source address */ + hdma->Instance->CPAR = SrcAddress; + + /* Configure DMA Channel destination address */ + hdma->Instance->CMAR = DstAddress; + } +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_DMA_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_flash.c b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_flash.c new file mode 100755 index 0000000..c35f1ef --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_flash.c @@ -0,0 +1,723 @@ +/** + ****************************************************************************** + * @file stm32l1xx_hal_flash.c + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief FLASH HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the internal FLASH memory: + * + Program operations functions + * + Memory Control functions + * + Peripheral State functions + * + @verbatim + ============================================================================== + ##### FLASH peripheral features ##### + ============================================================================== + [..] The Flash memory interface manages CPU AHB I-Code and D-Code accesses + to the Flash memory. It implements the erase and program Flash memory operations + and the read and write protection mechanisms. + + [..] The Flash memory interface accelerates code execution with a system of instruction + prefetch. + + [..] The FLASH main features are: + (+) Flash memory read operations + (+) Flash memory program/erase operations + (+) Read / write protections + (+) Prefetch on I-Code + (+) Option Bytes programming + + + ##### How to use this driver ##### + ============================================================================== + [..] + This driver provides functions and macros to configure and program the FLASH + memory of all STM32L1xx devices. + + (#) FLASH Memory I/O Programming functions: this group includes all needed + functions to erase and program the main memory: + (++) Lock and Unlock the FLASH interface + (++) Erase function: Erase page + (++) Program functions: Fast Word and Half Page(should be + executed from internal SRAM). + + (#) DATA EEPROM Programming functions: this group includes all + needed functions to erase and program the DATA EEPROM memory: + (++) Lock and Unlock the DATA EEPROM interface. + (++) Erase function: Erase Byte, erase HalfWord, erase Word, erase + Double Word (should be executed from internal SRAM). + (++) Program functions: Fast Program Byte, Fast Program Half-Word, + FastProgramWord, Program Byte, Program Half-Word, + Program Word and Program Double-Word (should be executed + from internal SRAM). + + (#) FLASH Option Bytes Programming functions: this group includes all needed + functions to manage the Option Bytes: + (++) Lock and Unlock the Option Bytes + (++) Set/Reset the write protection + (++) Set the Read protection Level + (++) Program the user Option Bytes + (++) Launch the Option Bytes loader + (++) Set/Get the Read protection Level. + (++) Set/Get the BOR level. + (++) Get the Write protection. + (++) Get the user option bytes. + + (#) Interrupts and flags management functions : this group + includes all needed functions to: + (++) Handle FLASH interrupts + (++) Wait for last FLASH operation according to its status + (++) Get error flag status + + (#) FLASH Interface configuration functions: this group includes + the management of following features: + (++) Enable/Disable the RUN PowerDown mode. + (++) Enable/Disable the SLEEP PowerDown mode. + + (#) FLASH Peripheral State methods: this group includes + the management of following features: + (++) Wait for the FLASH operation + (++) Get the specific FLASH error flag + + [..] In addition to these function, this driver includes a set of macros allowing + to handle the following operations: + + (+) Set/Get the latency + (+) Enable/Disable the prefetch buffer + (+) Enable/Disable the 64 bit Read Access. + (+) Enable/Disable the Flash power-down + (+) Enable/Disable the FLASH interrupts + (+) Monitor the FLASH flags status + + ##### Programming operation functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to manage the FLASH + program operations. + + [..] The FLASH Memory Programming functions, includes the following functions: + (+) HAL_FLASH_Unlock(void); + (+) HAL_FLASH_Lock(void); + (+) HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint32_t Data) + (+) HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint32_t Data) + + [..] Any operation of erase or program should follow these steps: + (#) Call the HAL_FLASH_Unlock() function to enable the flash control register and + program memory access. + (#) Call the desired function to erase page or program data. + (#) Call the HAL_FLASH_Lock() to disable the flash program memory access + (recommended to protect the FLASH memory against possible unwanted operation). + + ##### Option Bytes Programming functions ##### + ============================================================================== + + [..] The FLASH_Option Bytes Programming_functions, includes the following functions: + (+) HAL_FLASH_OB_Unlock(void); + (+) HAL_FLASH_OB_Lock(void); + (+) HAL_FLASH_OB_Launch(void); + (+) HAL_FLASHEx_OBProgram(FLASH_OBProgramInitTypeDef *pOBInit); + (+) HAL_FLASHEx_OBGetConfig(FLASH_OBProgramInitTypeDef *pOBInit); + + [..] Any operation of erase or program should follow these steps: + (#) Call the HAL_FLASH_OB_Unlock() function to enable the Flash option control + register access. + (#) Call the following functions to program the desired option bytes. + (++) HAL_FLASHEx_OBProgram(FLASH_OBProgramInitTypeDef *pOBInit); + (#) Once all needed option bytes to be programmed are correctly written, call the + HAL_FLASH_OB_Launch(void) function to launch the Option Bytes programming process. + (#) Call the HAL_FLASH_OB_Lock() to disable the Flash option control register access (recommended + to protect the option Bytes against possible unwanted operations). + + [..] Proprietary code Read Out Protection (PcROP): + (#) The PcROP sector is selected by using the same option bytes as the Write + protection. As a result, these 2 options are exclusive each other. + (#) To activate PCROP mode for Flash sectors(s), you need to follow the sequence below: + (++) Use this function HAL_FLASHEx_AdvOBProgram with PCROPState = OB_PCROP_STATE_ENABLE. + + @endverbatim + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_hal.h" + +/** @addtogroup STM32L1xx_HAL_Driver + * @{ + */ + +#ifdef HAL_FLASH_MODULE_ENABLED + +/** @defgroup FLASH FLASH + * @brief FLASH HAL module driver + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup FLASH_Private_Constants FLASH Private Constants + * @{ + */ +/** + * @} + */ + +/* Private macro ---------------------------- ---------------------------------*/ +/** @defgroup FLASH_Private_Macros FLASH Private Macros + * @{ + */ + +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +/** @defgroup FLASH_Private_Variables FLASH Private Variables + * @{ + */ +/* Variables used for Erase pages under interruption*/ +FLASH_ProcessTypeDef pFlash; +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup FLASH_Private_Functions FLASH Private Functions + * @{ + */ +static void FLASH_SetErrorCode(void); +extern void FLASH_PageErase(uint32_t PageAddress); +/** + * @} + */ + +/* Exported functions ---------------------------------------------------------*/ +/** @defgroup FLASH_Exported_Functions FLASH Exported Functions + * @{ + */ + +/** @defgroup FLASH_Exported_Functions_Group1 Programming operation functions + * @brief Programming operation functions + * +@verbatim +@endverbatim + * @{ + */ + +/** + * @brief Program word at a specified address + * @note To correctly run this function, the HAL_FLASH_Unlock() function + * must be called before. + * Call the HAL_FLASH_Lock() to disable the flash memory access + * (recommended to protect the FLASH memory against possible unwanted operation). + * + * @param TypeProgram: Indicate the way to program at a specified address. + * This parameter can be a value of @ref FLASH_Type_Program + * @param Address: Specifies the address to be programmed. + * @param Data: Specifies the data to be programmed + * + * @retval HAL_StatusTypeDef HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint32_t Data) +{ + HAL_StatusTypeDef status = HAL_ERROR; + + /* Process Locked */ + __HAL_LOCK(&pFlash); + + /* Check the parameters */ + assert_param(IS_FLASH_TYPEPROGRAM(TypeProgram)); + assert_param(IS_FLASH_PROGRAM_ADDRESS(Address)); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + + if(status == HAL_OK) + { + /* Clean the error context */ + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + + /*Program word (32-bit) at a specified address.*/ + *(__IO uint32_t *)Address = Data; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + } + + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + + return status; +} + +/** + * @brief Program word at a specified address with interrupt enabled. + * + * @param TypeProgram: Indicate the way to program at a specified address. + * This parameter can be a value of @ref FLASH_Type_Program + * @param Address: Specifies the address to be programmed. + * @param Data: Specifies the data to be programmed + * + * @retval HAL_StatusTypeDef HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint32_t Data) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process Locked */ + __HAL_LOCK(&pFlash); + + /* Check the parameters */ + assert_param(IS_FLASH_TYPEPROGRAM(TypeProgram)); + assert_param(IS_FLASH_PROGRAM_ADDRESS(Address)); + + /* Enable End of FLASH Operation and Error source interrupts */ + __HAL_FLASH_ENABLE_IT(FLASH_IT_EOP | FLASH_IT_ERR); + + pFlash.Address = Address; + pFlash.ProcedureOnGoing = FLASH_PROC_PROGRAM; + /* Clean the error context */ + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + + if(TypeProgram == FLASH_TYPEPROGRAM_WORD) + { + /* Program word (32-bit) at a specified address. */ + *(__IO uint32_t *)Address = Data; + } + return status; +} + +/** + * @brief This function handles FLASH interrupt request. + * @retval None + */ +void HAL_FLASH_IRQHandler(void) +{ + uint32_t addresstmp = 0; + + /* Check FLASH operation error flags */ + if( __HAL_FLASH_GET_FLAG(FLASH_FLAG_WRPERR) || + __HAL_FLASH_GET_FLAG(FLASH_FLAG_PGAERR) || + __HAL_FLASH_GET_FLAG(FLASH_FLAG_SIZERR) || +#if defined(FLASH_SR_RDERR) + __HAL_FLASH_GET_FLAG(FLASH_FLAG_RDERR) || +#endif /* FLASH_SR_RDERR */ +#if defined(FLASH_SR_OPTVERRUSR) + __HAL_FLASH_GET_FLAG(FLASH_FLAG_OPTVERRUSR) || +#endif /* FLASH_SR_OPTVERRUSR */ + __HAL_FLASH_GET_FLAG(FLASH_FLAG_OPTVERR) ) + { + if(pFlash.ProcedureOnGoing == FLASH_PROC_PAGEERASE) + { + /* Return the faulty sector */ + addresstmp = pFlash.Page; + pFlash.Page = 0xFFFFFFFFU; + } + else + { + /* Return the faulty address */ + addresstmp = pFlash.Address; + } + /* Save the Error code */ + FLASH_SetErrorCode(); + + /* FLASH error interrupt user callback */ + HAL_FLASH_OperationErrorCallback(addresstmp); + + /* Stop the procedure ongoing */ + pFlash.ProcedureOnGoing = FLASH_PROC_NONE; + } + + /* Check FLASH End of Operation flag */ + if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_EOP)) + { + /* Clear FLASH End of Operation pending bit */ + __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP); + + /* Process can continue only if no error detected */ + if(pFlash.ProcedureOnGoing != FLASH_PROC_NONE) + { + if(pFlash.ProcedureOnGoing == FLASH_PROC_PAGEERASE) + { + /* Nb of pages to erased can be decreased */ + pFlash.NbPagesToErase--; + + /* Check if there are still pages to erase */ + if(pFlash.NbPagesToErase != 0) + { + addresstmp = pFlash.Page; + /*Indicate user which sector has been erased */ + HAL_FLASH_EndOfOperationCallback(addresstmp); + + /*Increment sector number*/ + addresstmp = pFlash.Page + FLASH_PAGE_SIZE; + pFlash.Page = addresstmp; + + /* If the erase operation is completed, disable the ERASE Bit */ + CLEAR_BIT(FLASH->PECR, FLASH_PECR_ERASE); + + FLASH_PageErase(addresstmp); + } + else + { + /* No more pages to Erase, user callback can be called. */ + /* Reset Sector and stop Erase pages procedure */ + pFlash.Page = addresstmp = 0xFFFFFFFFU; + pFlash.ProcedureOnGoing = FLASH_PROC_NONE; + /* FLASH EOP interrupt user callback */ + HAL_FLASH_EndOfOperationCallback(addresstmp); + } + } + else + { + /* If the program operation is completed, disable the PROG Bit */ + CLEAR_BIT(FLASH->PECR, FLASH_PECR_PROG); + + /* Program ended. Return the selected address */ + /* FLASH EOP interrupt user callback */ + HAL_FLASH_EndOfOperationCallback(pFlash.Address); + + /* Reset Address and stop Program procedure */ + pFlash.Address = 0xFFFFFFFFU; + pFlash.ProcedureOnGoing = FLASH_PROC_NONE; + } + } + } + + + if(pFlash.ProcedureOnGoing == FLASH_PROC_NONE) + { + /* Operation is completed, disable the PROG and ERASE */ + CLEAR_BIT(FLASH->PECR, (FLASH_PECR_ERASE | FLASH_PECR_PROG)); + + /* Disable End of FLASH Operation and Error source interrupts */ + __HAL_FLASH_DISABLE_IT(FLASH_IT_EOP | FLASH_IT_ERR); + + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + } +} + +/** + * @brief FLASH end of operation interrupt callback + * @param ReturnValue: The value saved in this parameter depends on the ongoing procedure + * - Pages Erase: Address of the page which has been erased + * (if 0xFFFFFFFF, it means that all the selected pages have been erased) + * - Program: Address which was selected for data program + * @retval none + */ +__weak void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(ReturnValue); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_FLASH_EndOfOperationCallback could be implemented in the user file + */ +} + +/** + * @brief FLASH operation error interrupt callback + * @param ReturnValue: The value saved in this parameter depends on the ongoing procedure + * - Pages Erase: Address of the page which returned an error + * - Program: Address which was selected for data program + * @retval none + */ +__weak void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(ReturnValue); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_FLASH_OperationErrorCallback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup FLASH_Exported_Functions_Group2 Peripheral Control functions + * @brief management functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the FLASH + memory operations. + +@endverbatim + * @{ + */ + +/** + * @brief Unlock the FLASH control register access + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_Unlock(void) +{ + if (HAL_IS_BIT_SET(FLASH->PECR, FLASH_PECR_PRGLOCK)) + { + /* Unlocking FLASH_PECR register access*/ + if(HAL_IS_BIT_SET(FLASH->PECR, FLASH_PECR_PELOCK)) + { + WRITE_REG(FLASH->PEKEYR, FLASH_PEKEY1); + WRITE_REG(FLASH->PEKEYR, FLASH_PEKEY2); + } + + /* Unlocking the program memory access */ + WRITE_REG(FLASH->PRGKEYR, FLASH_PRGKEY1); + WRITE_REG(FLASH->PRGKEYR, FLASH_PRGKEY2); + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Locks the FLASH control register access + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_Lock(void) +{ + /* Set the PRGLOCK Bit to lock the FLASH Registers access */ + SET_BIT(FLASH->PECR, FLASH_PECR_PRGLOCK); + + return HAL_OK; +} + +/** + * @brief Unlock the FLASH Option Control Registers access. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void) +{ + if(HAL_IS_BIT_SET(FLASH->PECR, FLASH_PECR_OPTLOCK)) + { + /* Unlocking FLASH_PECR register access*/ + if(HAL_IS_BIT_SET(FLASH->PECR, FLASH_PECR_PELOCK)) + { + /* Unlocking FLASH_PECR register access*/ + WRITE_REG(FLASH->PEKEYR, FLASH_PEKEY1); + WRITE_REG(FLASH->PEKEYR, FLASH_PEKEY2); + } + + /* Unlocking the option bytes block access */ + WRITE_REG(FLASH->OPTKEYR, FLASH_OPTKEY1); + WRITE_REG(FLASH->OPTKEYR, FLASH_OPTKEY2); + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Lock the FLASH Option Control Registers access. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_OB_Lock(void) +{ + /* Set the OPTLOCK Bit to lock the option bytes block access */ + SET_BIT(FLASH->PECR, FLASH_PECR_OPTLOCK); + + return HAL_OK; +} + +/** + * @brief Launch the option byte loading. + * @note This function will reset automatically the MCU. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_OB_Launch(void) +{ + /* Set the OBL_Launch bit to launch the option byte loading */ + SET_BIT(FLASH->PECR, FLASH_PECR_OBL_LAUNCH); + + /* Wait for last operation to be completed */ + return(FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE)); +} + +/** + * @} + */ + +/** @defgroup FLASH_Exported_Functions_Group3 Peripheral errors functions + * @brief Peripheral errors functions + * +@verbatim + =============================================================================== + ##### Peripheral Errors functions ##### + =============================================================================== + [..] + This subsection permit to get in run-time errors of the FLASH peripheral. + +@endverbatim + * @{ + */ + +/** + * @brief Get the specific FLASH error flag. + * @retval FLASH_ErrorCode The returned value can be: + * @ref FLASH_Error_Codes + */ +uint32_t HAL_FLASH_GetError(void) +{ + return pFlash.ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup FLASH_Private_Functions + * @{ + */ + +/** + * @brief Wait for a FLASH operation to complete. + * @param Timeout maximum flash operation timeout + * @retval HAL Status + */ +HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout) +{ + /* Wait for the FLASH operation to complete by polling on BUSY flag to be reset. + Even if the FLASH operation fails, the BUSY flag will be reset and an error + flag will be set */ + + uint32_t tickstart = HAL_GetTick(); + + while(__HAL_FLASH_GET_FLAG(FLASH_FLAG_BSY)) + { + if (Timeout != HAL_MAX_DELAY) + { + if((Timeout == 0) || ((HAL_GetTick()-tickstart) > Timeout)) + { + return HAL_TIMEOUT; + } + } + } + + /* Check FLASH End of Operation flag */ + if (__HAL_FLASH_GET_FLAG(FLASH_FLAG_EOP)) + { + /* Clear FLASH End of Operation pending bit */ + __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP); + } + + if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_WRPERR) || + __HAL_FLASH_GET_FLAG(FLASH_FLAG_OPTVERR) || +#if defined(FLASH_SR_RDERR) + __HAL_FLASH_GET_FLAG(FLASH_FLAG_RDERR) || +#endif /* FLASH_SR_RDERR */ +#if defined(FLASH_SR_OPTVERRUSR) + __HAL_FLASH_GET_FLAG(FLASH_FLAG_OPTVERRUSR) || +#endif /* FLASH_SR_OPTVERRUSR */ + __HAL_FLASH_GET_FLAG(FLASH_FLAG_PGAERR)) + { + /*Save the error code*/ + FLASH_SetErrorCode(); + return HAL_ERROR; + } + + /* There is no error flag set */ + return HAL_OK; +} + + +/** + * @brief Set the specific FLASH error flag. + * @retval None + */ +static void FLASH_SetErrorCode(void) +{ + uint32_t flags = 0; + + if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_WRPERR)) + { + pFlash.ErrorCode |= HAL_FLASH_ERROR_WRP; + flags |= FLASH_FLAG_WRPERR; + } + if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_PGAERR)) + { + pFlash.ErrorCode |= HAL_FLASH_ERROR_PGA; + flags |= FLASH_FLAG_PGAERR; + } + if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_OPTVERR)) + { + pFlash.ErrorCode |= HAL_FLASH_ERROR_OPTV; + flags |= FLASH_FLAG_OPTVERR; + } + +#if defined(FLASH_SR_RDERR) + if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_RDERR)) + { + pFlash.ErrorCode |= HAL_FLASH_ERROR_RD; + flags |= FLASH_FLAG_RDERR; + } +#endif /* FLASH_SR_RDERR */ +#if defined(FLASH_SR_OPTVERRUSR) + if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_OPTVERRUSR)) + { + pFlash.ErrorCode |= HAL_FLASH_ERROR_OPTVUSR; + flags |= FLASH_FLAG_OPTVERRUSR; + } +#endif /* FLASH_SR_OPTVERRUSR */ + + /* Clear FLASH error pending bits */ + __HAL_FLASH_CLEAR_FLAG(flags); +} +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_FLASH_MODULE_ENABLED */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_flash_ex.c b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_flash_ex.c new file mode 100755 index 0000000..3bc01f5 --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_flash_ex.c @@ -0,0 +1,1871 @@ +/** + ****************************************************************************** + * @file stm32l1xx_hal_flash_ex.c + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief Extended FLASH HAL module driver. + * + * This file provides firmware functions to manage the following + * functionalities of the internal FLASH memory: + * + FLASH Interface configuration + * + FLASH Memory Erasing + * + DATA EEPROM Programming/Erasing + * + Option Bytes Programming + * + Interrupts management + * + @verbatim + ============================================================================== + ##### Flash peripheral Extended features ##### + ============================================================================== + + [..] Comparing to other products, the FLASH interface for STM32L1xx + devices contains the following additional features + (+) Erase functions + (+) DATA_EEPROM memory management + (+) BOOT option bit configuration + (+) PCROP protection for all sectors + + ##### How to use this driver ##### + ============================================================================== + [..] This driver provides functions to configure and program the FLASH memory + of all STM32L1xx. It includes: + (+) Full DATA_EEPROM erase and program management + (+) Boot activation + (+) PCROP protection configuration and control for all pages + + @endverbatim + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_hal.h" + +/** @addtogroup STM32L1xx_HAL_Driver + * @{ + */ +#ifdef HAL_FLASH_MODULE_ENABLED + +/** @addtogroup FLASH + * @{ + */ +/** @addtogroup FLASH_Private_Variables + * @{ + */ +/* Variables used for Erase pages under interruption*/ +extern FLASH_ProcessTypeDef pFlash; +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup FLASHEx FLASHEx + * @brief FLASH HAL Extension module driver + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup FLASHEx_Private_Constants FLASHEx Private Constants + * @{ + */ +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/** @defgroup FLASHEx_Private_Macros FLASHEx Private Macros + * @{ + */ +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup FLASHEx_Private_Functions FLASHEx Private Functions + * @{ + */ +void FLASH_PageErase(uint32_t PageAddress); +static HAL_StatusTypeDef FLASH_OB_WRPConfig(FLASH_OBProgramInitTypeDef *pOBInit, FunctionalState NewState); +static void FLASH_OB_WRPConfigWRP1OrPCROP1(uint32_t WRP1OrPCROP1, FunctionalState NewState); +#if defined(STM32L100xC) || defined(STM32L151xC) || defined(STM32L152xC) || defined(STM32L162xC) \ + || defined(STM32L151xCA) || defined(STM32L151xD) || defined(STM32L151xDX) || defined(STM32L152xCA) \ + || defined(STM32L152xD) || defined(STM32L152xDX) || defined(STM32L162xCA) || defined(STM32L162xD) \ + || defined(STM32L162xDX) || defined(STM32L151xE) || defined(STM32L152xE) || defined(STM32L162xE) +static void FLASH_OB_WRPConfigWRP2OrPCROP2(uint32_t WRP2OrPCROP2, FunctionalState NewState); +#endif /* STM32L100xC || STM32L151xC || STM32L152xC || (...) || STM32L151xE || STM32L152xE || STM32L162xE */ +#if defined(STM32L151xD) || defined(STM32L151xDX) || defined(STM32L152xD) || defined(STM32L152xDX) \ + || defined(STM32L162xD) || defined(STM32L162xDX) || defined(STM32L151xE) || defined(STM32L152xE) \ + || defined(STM32L162xE) +static void FLASH_OB_WRPConfigWRP3(uint32_t WRP3, FunctionalState NewState); +#endif /* STM32L151xD || STM32L152xD || STM32L162xD || STM32L151xE || STM32L152xE || STM32L162xE */ +#if defined(STM32L151xE) || defined(STM32L152xE) || defined(STM32L162xE) || defined(STM32L151xDX) \ + || defined(STM32L152xDX) || defined(STM32L162xDX) +static void FLASH_OB_WRPConfigWRP4(uint32_t WRP4, FunctionalState NewState); +#endif /* STM32L151xE || STM32L152xE || STM32L151xDX || ... */ +#if defined(FLASH_OBR_SPRMOD) +static HAL_StatusTypeDef FLASH_OB_PCROPConfig(FLASH_AdvOBProgramInitTypeDef *pAdvOBInit, FunctionalState NewState); +#endif /* FLASH_OBR_SPRMOD */ +#if defined(FLASH_OBR_nRST_BFB2) +static HAL_StatusTypeDef FLASH_OB_BootConfig(uint8_t OB_BOOT); +#endif /* FLASH_OBR_nRST_BFB2 */ +static HAL_StatusTypeDef FLASH_OB_RDPConfig(uint8_t OB_RDP); +static HAL_StatusTypeDef FLASH_OB_UserConfig(uint8_t OB_IWDG, uint8_t OB_STOP, uint8_t OB_STDBY); +static HAL_StatusTypeDef FLASH_OB_BORConfig(uint8_t OB_BOR); +static uint8_t FLASH_OB_GetRDP(void); +static uint8_t FLASH_OB_GetUser(void); +static uint8_t FLASH_OB_GetBOR(void); +static HAL_StatusTypeDef FLASH_DATAEEPROM_FastProgramByte(uint32_t Address, uint8_t Data); +static HAL_StatusTypeDef FLASH_DATAEEPROM_FastProgramHalfWord(uint32_t Address, uint16_t Data); +static HAL_StatusTypeDef FLASH_DATAEEPROM_FastProgramWord(uint32_t Address, uint32_t Data); +static HAL_StatusTypeDef FLASH_DATAEEPROM_ProgramWord(uint32_t Address, uint32_t Data); +static HAL_StatusTypeDef FLASH_DATAEEPROM_ProgramHalfWord(uint32_t Address, uint16_t Data); +static HAL_StatusTypeDef FLASH_DATAEEPROM_ProgramByte(uint32_t Address, uint8_t Data); +/** + * @} + */ + +/* Exported functions ---------------------------------------------------------*/ +/** @defgroup FLASHEx_Exported_Functions FLASHEx Exported Functions + * @{ + */ + +/** @defgroup FLASHEx_Exported_Functions_Group1 FLASHEx Memory Erasing functions + * @brief FLASH Memory Erasing functions + * +@verbatim + ============================================================================== + ##### FLASH Erasing Programming functions ##### + ============================================================================== + + [..] The FLASH Memory Erasing functions, includes the following functions: + (+) @ref HAL_FLASHEx_Erase: return only when erase has been done + (+) @ref HAL_FLASHEx_Erase_IT: end of erase is done when @ref HAL_FLASH_EndOfOperationCallback + is called with parameter 0xFFFFFFFF + + [..] Any operation of erase should follow these steps: + (#) Call the @ref HAL_FLASH_Unlock() function to enable the flash control register and + program memory access. + (#) Call the desired function to erase page. + (#) Call the @ref HAL_FLASH_Lock() to disable the flash program memory access + (recommended to protect the FLASH memory against possible unwanted operation). + +@endverbatim + * @{ + */ + +/** + * @brief Erase the specified FLASH memory Pages + * @note To correctly run this function, the @ref HAL_FLASH_Unlock() function + * must be called before. + * Call the @ref HAL_FLASH_Lock() to disable the flash memory access + * (recommended to protect the FLASH memory against possible unwanted operation) + * @note For STM32L151xDX/STM32L152xDX/STM32L162xDX, as memory is not continuous between + * 2 banks, user should perform pages erase by bank only. + * @param[in] pEraseInit pointer to an FLASH_EraseInitTypeDef structure that + * contains the configuration information for the erasing. + * + * @param[out] PageError pointer to variable that + * contains the configuration information on faulty page in case of error + * (0xFFFFFFFF means that all the pages have been correctly erased) + * + * @retval HAL_StatusTypeDef HAL Status + */ +HAL_StatusTypeDef HAL_FLASHEx_Erase(FLASH_EraseInitTypeDef *pEraseInit, uint32_t *PageError) +{ + HAL_StatusTypeDef status = HAL_ERROR; + uint32_t address = 0; + + /* Process Locked */ + __HAL_LOCK(&pFlash); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + + if (status == HAL_OK) + { + /*Initialization of PageError variable*/ + *PageError = 0xFFFFFFFFU; + + /* Check the parameters */ + assert_param(IS_NBPAGES(pEraseInit->NbPages)); + assert_param(IS_FLASH_TYPEERASE(pEraseInit->TypeErase)); + assert_param(IS_FLASH_PROGRAM_ADDRESS(pEraseInit->PageAddress)); + assert_param(IS_FLASH_PROGRAM_ADDRESS((pEraseInit->PageAddress & ~(FLASH_PAGE_SIZE - 1)) + pEraseInit->NbPages * FLASH_PAGE_SIZE - 1)); + +#if defined(STM32L151xDX) || defined(STM32L152xDX) || defined(STM32L162xDX) + /* Check on which bank belongs the 1st address to erase */ + if (pEraseInit->PageAddress < FLASH_BANK2_BASE) + { + /* BANK1 */ + /* Check that last page to erase still belongs to BANK1 */ + if (((pEraseInit->PageAddress & ~(FLASH_PAGE_SIZE - 1)) + pEraseInit->NbPages * FLASH_PAGE_SIZE - 1) > FLASH_BANK1_END) + { + /* Last page does not belong to BANK1, erase procedure cannot be performed because memory is not + continuous */ + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + return HAL_ERROR; + } + } + else + { + /* BANK2 */ + /* Check that last page to erase still belongs to BANK2 */ + if (((pEraseInit->PageAddress & ~(FLASH_PAGE_SIZE - 1)) + pEraseInit->NbPages * FLASH_PAGE_SIZE - 1) > FLASH_BANK2_END) + { + /* Last page does not belong to BANK2, erase procedure cannot be performed because memory is not + continuous */ + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + return HAL_ERROR; + } + } +#endif /* STM32L151xDX || STM32L152xDX || STM32L162xDX */ + + /* Erase page by page to be done*/ + for(address = pEraseInit->PageAddress; + address < ((pEraseInit->NbPages * FLASH_PAGE_SIZE) + pEraseInit->PageAddress); + address += FLASH_PAGE_SIZE) + { + FLASH_PageErase(address); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + + /* If the erase operation is completed, disable the ERASE Bit */ + CLEAR_BIT(FLASH->PECR, FLASH_PECR_PROG); + CLEAR_BIT(FLASH->PECR, FLASH_PECR_ERASE); + + if (status != HAL_OK) + { + /* In case of error, stop erase procedure and return the faulty address */ + *PageError = address; + break; + } + } + } + + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + + return status; +} + +/** + * @brief Perform a page erase of the specified FLASH memory pages with interrupt enabled + * @note To correctly run this function, the @ref HAL_FLASH_Unlock() function + * must be called before. + * Call the @ref HAL_FLASH_Lock() to disable the flash memory access + * (recommended to protect the FLASH memory against possible unwanted operation) + * End of erase is done when @ref HAL_FLASH_EndOfOperationCallback is called with parameter + * 0xFFFFFFFF + * @note For STM32L151xDX/STM32L152xDX/STM32L162xDX, as memory is not continuous between + * 2 banks, user should perform pages erase by bank only. + * @param pEraseInit pointer to an FLASH_EraseInitTypeDef structure that + * contains the configuration information for the erasing. + * + * @retval HAL_StatusTypeDef HAL Status + */ +HAL_StatusTypeDef HAL_FLASHEx_Erase_IT(FLASH_EraseInitTypeDef *pEraseInit) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* If procedure already ongoing, reject the next one */ + if (pFlash.ProcedureOnGoing != FLASH_PROC_NONE) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_NBPAGES(pEraseInit->NbPages)); + assert_param(IS_FLASH_TYPEERASE(pEraseInit->TypeErase)); + assert_param(IS_FLASH_PROGRAM_ADDRESS(pEraseInit->PageAddress)); + assert_param(IS_FLASH_PROGRAM_ADDRESS((pEraseInit->PageAddress & ~(FLASH_PAGE_SIZE - 1)) + pEraseInit->NbPages * FLASH_PAGE_SIZE - 1)); + + /* Process Locked */ + __HAL_LOCK(&pFlash); + +#if defined(STM32L151xDX) || defined(STM32L152xDX) || defined(STM32L162xDX) + /* Check on which bank belongs the 1st address to erase */ + if (pEraseInit->PageAddress < FLASH_BANK2_BASE) + { + /* BANK1 */ + /* Check that last page to erase still belongs to BANK1 */ + if (((pEraseInit->PageAddress & ~(FLASH_PAGE_SIZE - 1)) + pEraseInit->NbPages * FLASH_PAGE_SIZE - 1) > FLASH_BANK1_END) + { + /* Last page does not belong to BANK1, erase procedure cannot be performed because memory is not + continuous */ + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + return HAL_ERROR; + } + } + else + { + /* BANK2 */ + /* Check that last page to erase still belongs to BANK2 */ + if (((pEraseInit->PageAddress & ~(FLASH_PAGE_SIZE - 1)) + pEraseInit->NbPages * FLASH_PAGE_SIZE - 1) > FLASH_BANK2_END) + { + /* Last page does not belong to BANK2, erase procedure cannot be performed because memory is not + continuous */ + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + return HAL_ERROR; + } + } +#endif /* STM32L151xDX || STM32L152xDX || STM32L162xDX */ + + /* Enable End of FLASH Operation and Error source interrupts */ + __HAL_FLASH_ENABLE_IT(FLASH_IT_EOP | FLASH_IT_ERR); + + pFlash.ProcedureOnGoing = FLASH_PROC_PAGEERASE; + pFlash.NbPagesToErase = pEraseInit->NbPages; + pFlash.Page = pEraseInit->PageAddress; + + /*Erase 1st page and wait for IT*/ + FLASH_PageErase(pEraseInit->PageAddress); + + return status; +} + +/** + * @} + */ + +/** @defgroup FLASHEx_Exported_Functions_Group2 Option Bytes Programming functions + * @brief Option Bytes Programming functions + * +@verbatim + ============================================================================== + ##### Option Bytes Programming functions ##### + ============================================================================== + + [..] Any operation of erase or program should follow these steps: + (#) Call the @ref HAL_FLASH_OB_Unlock() function to enable the Flash option control + register access. + (#) Call following function to program the desired option bytes. + (++) @ref HAL_FLASHEx_OBProgram: + - To Enable/Disable the desired sector write protection. + - To set the desired read Protection Level. + - To configure the user option Bytes: IWDG, STOP and the Standby. + - To Set the BOR level. + (#) Once all needed option bytes to be programmed are correctly written, call the + @ref HAL_FLASH_OB_Launch(void) function to launch the Option Bytes programming process. + (#) Call the @ref HAL_FLASH_OB_Lock() to disable the Flash option control register access (recommended + to protect the option Bytes against possible unwanted operations). + + [..] Proprietary code Read Out Protection (PcROP): + (#) The PcROP sector is selected by using the same option bytes as the Write + protection (nWRPi bits). As a result, these 2 options are exclusive each other. + (#) In order to activate the PcROP (change the function of the nWRPi option bits), + the SPRMOD option bit must be activated. + (#) The active value of nWRPi bits is inverted when PCROP mode is active, this + means: if SPRMOD = 1 and nWRPi = 1 (default value), then the user sector "i" + is read/write protected. + (#) To activate PCROP mode for Flash sector(s), you need to call the following function: + (++) @ref HAL_FLASHEx_AdvOBProgram in selecting sectors to be read/write protected + (++) @ref HAL_FLASHEx_OB_SelectPCROP to enable the read/write protection + (#) PcROP is available only in STM32L151xBA, STM32L152xBA, STM32L151xC, STM32L152xC & STM32L162xC devices. + +@endverbatim + * @{ + */ + +/** + * @brief Program option bytes + * @param pOBInit pointer to an FLASH_OBInitStruct structure that + * contains the configuration information for the programming. + * + * @retval HAL_StatusTypeDef HAL Status + */ +HAL_StatusTypeDef HAL_FLASHEx_OBProgram(FLASH_OBProgramInitTypeDef *pOBInit) +{ + HAL_StatusTypeDef status = HAL_ERROR; + + /* Process Locked */ + __HAL_LOCK(&pFlash); + + /* Check the parameters */ + assert_param(IS_OPTIONBYTE(pOBInit->OptionType)); + + /*Write protection configuration*/ + if((pOBInit->OptionType & OPTIONBYTE_WRP) == OPTIONBYTE_WRP) + { + assert_param(IS_WRPSTATE(pOBInit->WRPState)); + if (pOBInit->WRPState == OB_WRPSTATE_ENABLE) + { + /* Enable of Write protection on the selected Sector*/ + status = FLASH_OB_WRPConfig(pOBInit, ENABLE); + } + else + { + /* Disable of Write protection on the selected Sector*/ + status = FLASH_OB_WRPConfig(pOBInit, DISABLE); + } + if (status != HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + return status; + } + } + + /* Read protection configuration*/ + if((pOBInit->OptionType & OPTIONBYTE_RDP) == OPTIONBYTE_RDP) + { + status = FLASH_OB_RDPConfig(pOBInit->RDPLevel); + if (status != HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + return status; + } + } + + /* USER configuration*/ + if((pOBInit->OptionType & OPTIONBYTE_USER) == OPTIONBYTE_USER) + { + status = FLASH_OB_UserConfig(pOBInit->USERConfig & OB_IWDG_SW, + pOBInit->USERConfig & OB_STOP_NORST, + pOBInit->USERConfig & OB_STDBY_NORST); + if (status != HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + return status; + } + } + + /* BOR Level configuration*/ + if((pOBInit->OptionType & OPTIONBYTE_BOR) == OPTIONBYTE_BOR) + { + status = FLASH_OB_BORConfig(pOBInit->BORLevel); + if (status != HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + return status; + } + } + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + + return status; +} + +/** + * @brief Get the Option byte configuration + * @param pOBInit pointer to an FLASH_OBInitStruct structure that + * contains the configuration information for the programming. + * + * @retval None + */ +void HAL_FLASHEx_OBGetConfig(FLASH_OBProgramInitTypeDef *pOBInit) +{ + pOBInit->OptionType = OPTIONBYTE_WRP | OPTIONBYTE_RDP | OPTIONBYTE_USER | OPTIONBYTE_BOR; + + /*Get WRP1*/ + pOBInit->WRPSector0To31 = (uint32_t)(FLASH->WRPR1); + +#if defined(STM32L100xC) || defined(STM32L151xC) || defined(STM32L152xC) || defined(STM32L162xC) \ + || defined(STM32L151xCA) || defined(STM32L151xD) || defined(STM32L151xDX) || defined(STM32L152xCA) \ + || defined(STM32L152xD) || defined(STM32L152xDX) || defined(STM32L162xCA) || defined(STM32L162xD) \ + || defined(STM32L162xDX) || defined(STM32L151xE) || defined(STM32L152xE) || defined(STM32L162xE) + + /*Get WRP2*/ + pOBInit->WRPSector32To63 = (uint32_t)(FLASH->WRPR2); + +#endif /* STM32L100xC || STM32L151xC || STM32L152xC || (...) || STM32L151xE || STM32L152xE || STM32L162xE */ + +#if defined(STM32L151xD) || defined(STM32L151xDX) || defined(STM32L152xD) || defined(STM32L152xDX) \ + || defined(STM32L162xD) || defined(STM32L162xDX) || defined(STM32L151xE) || defined(STM32L152xE) \ + || defined(STM32L162xE) + + /*Get WRP3*/ + pOBInit->WRPSector64To95 = (uint32_t)(FLASH->WRPR3); + +#endif /* STM32L151xD || STM32L152xD || STM32L162xD || STM32L151xE || STM32L152xE || STM32L162xE */ + +#if defined(STM32L151xE) || defined(STM32L152xE) || defined(STM32L162xE) || defined(STM32L151xDX) \ + || defined(STM32L152xDX) || defined(STM32L162xDX) + + /*Get WRP4*/ + pOBInit->WRPSector96To127 = (uint32_t)(FLASH->WRPR4); + +#endif /* STM32L151xE || STM32L152xE || STM32L162xE || STM32L151xDX || ... */ + + /*Get RDP Level*/ + pOBInit->RDPLevel = FLASH_OB_GetRDP(); + + /*Get USER*/ + pOBInit->USERConfig = FLASH_OB_GetUser(); + + /*Get BOR Level*/ + pOBInit->BORLevel = FLASH_OB_GetBOR(); +} + +#if defined(FLASH_OBR_SPRMOD) || defined(FLASH_OBR_nRST_BFB2) + +/** + * @brief Program option bytes + * @note This function can be used only for Cat2 & Cat3 devices for PCROP and Cat4 & Cat5 for BFB2. + * @param pAdvOBInit pointer to an FLASH_AdvOBProgramInitTypeDef structure that + * contains the configuration information for the programming. + * + * @retval HAL_StatusTypeDef HAL Status + */ +HAL_StatusTypeDef HAL_FLASHEx_AdvOBProgram (FLASH_AdvOBProgramInitTypeDef *pAdvOBInit) +{ + HAL_StatusTypeDef status = HAL_ERROR; + + /* Check the parameters */ + assert_param(IS_OBEX(pAdvOBInit->OptionType)); + +#if defined(FLASH_OBR_SPRMOD) + + /* Program PCROP option byte*/ + if ((pAdvOBInit->OptionType & OPTIONBYTE_PCROP) == OPTIONBYTE_PCROP) + { + /* Check the parameters */ + assert_param(IS_PCROPSTATE(pAdvOBInit->PCROPState)); + if (pAdvOBInit->PCROPState == OB_PCROP_STATE_ENABLE) + { + /*Enable of Write protection on the selected Sector*/ + status = FLASH_OB_PCROPConfig(pAdvOBInit, ENABLE); + if (status != HAL_OK) + { + return status; + } + } + else + { + /* Disable of Write protection on the selected Sector*/ + status = FLASH_OB_PCROPConfig(pAdvOBInit, DISABLE); + if (status != HAL_OK) + { + return status; + } + } + } + +#endif /* FLASH_OBR_SPRMOD */ + +#if defined(FLASH_OBR_nRST_BFB2) + + /* Program BOOT config option byte */ + if ((pAdvOBInit->OptionType & OPTIONBYTE_BOOTCONFIG) == OPTIONBYTE_BOOTCONFIG) + { + status = FLASH_OB_BootConfig(pAdvOBInit->BootConfig); + } + +#endif /* FLASH_OBR_nRST_BFB2 */ + + return status; +} + +/** + * @brief Get the OBEX byte configuration + * @note This function can be used only for Cat2 & Cat3 devices for PCROP and Cat4 & Cat5 for BFB2. + * @param pAdvOBInit pointer to an FLASH_AdvOBProgramInitTypeDef structure that + * contains the configuration information for the programming. + * + * @retval None + */ +void HAL_FLASHEx_AdvOBGetConfig(FLASH_AdvOBProgramInitTypeDef *pAdvOBInit) +{ + pAdvOBInit->OptionType = 0; + +#if defined(FLASH_OBR_SPRMOD) + + pAdvOBInit->OptionType |= OPTIONBYTE_PCROP; + + /*Get PCROP state */ + pAdvOBInit->PCROPState = (FLASH->OBR & FLASH_OBR_SPRMOD) >> POSITION_VAL(FLASH_OBR_SPRMOD); + + /*Get PCROP protected sector from 0 to 31 */ + pAdvOBInit->PCROPSector0To31 = FLASH->WRPR1; + +#if defined(STM32L100xC) || defined(STM32L151xC) || defined(STM32L152xC) || defined(STM32L162xC) + + /*Get PCROP protected sector from 32 to 63 */ + pAdvOBInit->PCROPSector32To63 = FLASH->WRPR2; + +#endif /* STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC */ +#endif /* FLASH_OBR_SPRMOD */ + +#if defined(FLASH_OBR_nRST_BFB2) + + pAdvOBInit->OptionType |= OPTIONBYTE_BOOTCONFIG; + + /* Get Boot config OB */ + pAdvOBInit->BootConfig = (FLASH->OBR & FLASH_OBR_nRST_BFB2) >> 16; + +#endif /* FLASH_OBR_nRST_BFB2 */ +} + +#endif /* FLASH_OBR_SPRMOD || FLASH_OBR_nRST_BFB2 */ + +#if defined(FLASH_OBR_SPRMOD) + +/** + * @brief Select the Protection Mode (SPRMOD). + * @note This function can be used only for STM32L151xBA, STM32L152xBA, STM32L151xC, STM32L152xC & STM32L162xC devices + * @note Once SPRMOD bit is active, unprotection of a protected sector is not possible + * @note Read a protected sector will set RDERR Flag and write a protected sector will set WRPERR Flag + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FLASHEx_OB_SelectPCROP(void) +{ + HAL_StatusTypeDef status = HAL_OK; + uint16_t tmp1 = 0; + uint32_t tmp2 = 0; + uint8_t optiontmp = 0; + uint16_t optiontmp2 = 0; + + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + + /* Mask RDP Byte */ + optiontmp = (uint8_t)(*(__IO uint8_t *)(OB_BASE)); + + /* Update Option Byte */ + optiontmp2 = (uint16_t)(OB_PCROP_SELECTED | optiontmp); + + /* calculate the option byte to write */ + tmp1 = (uint16_t)(~(optiontmp2 )); + tmp2 = (uint32_t)(((uint32_t)((uint32_t)(tmp1) << 16)) | ((uint32_t)optiontmp2)); + + if(status == HAL_OK) + { + /* Clean the error context */ + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + + /* program PCRop */ + OB->RDP = tmp2; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + } + + /* Return the Read protection operation Status */ + return status; +} + +/** + * @brief Deselect the Protection Mode (SPRMOD). + * @note This function can be used only for STM32L151xBA, STM32L152xBA, STM32L151xC, STM32L152xC & STM32L162xC devices + * @note Once SPRMOD bit is active, unprotection of a protected sector is not possible + * @note Read a protected sector will set RDERR Flag and write a protected sector will set WRPERR Flag + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FLASHEx_OB_DeSelectPCROP(void) +{ + HAL_StatusTypeDef status = HAL_OK; + uint16_t tmp1 = 0; + uint32_t tmp2 = 0; + uint8_t optiontmp = 0; + uint16_t optiontmp2 = 0; + + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + + /* Mask RDP Byte */ + optiontmp = (uint8_t)(*(__IO uint8_t *)(OB_BASE)); + + /* Update Option Byte */ + optiontmp2 = (uint16_t)(OB_PCROP_DESELECTED | optiontmp); + + /* calculate the option byte to write */ + tmp1 = (uint16_t)(~(optiontmp2 )); + tmp2 = (uint32_t)(((uint32_t)((uint32_t)(tmp1) << 16)) | ((uint32_t)optiontmp2)); + + if(status == HAL_OK) + { + /* Clean the error context */ + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + + /* program PCRop */ + OB->RDP = tmp2; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + } + + /* Return the Read protection operation Status */ + return status; +} + +#endif /* FLASH_OBR_SPRMOD */ + +/** + * @} + */ + +/** @defgroup FLASHEx_Exported_Functions_Group3 DATA EEPROM Programming functions + * @brief DATA EEPROM Programming functions + * +@verbatim + =============================================================================== + ##### DATA EEPROM Programming functions ##### + =============================================================================== + + [..] Any operation of erase or program should follow these steps: + (#) Call the @ref HAL_FLASHEx_DATAEEPROM_Unlock() function to enable the data EEPROM access + and Flash program erase control register access. + (#) Call the desired function to erase or program data. + (#) Call the @ref HAL_FLASHEx_DATAEEPROM_Lock() to disable the data EEPROM access + and Flash program erase control register access(recommended + to protect the DATA_EEPROM against possible unwanted operation). + +@endverbatim + * @{ + */ + +/** + * @brief Unlocks the data memory and FLASH_PECR register access. + * @retval HAL_StatusTypeDef HAL Status + */ +HAL_StatusTypeDef HAL_FLASHEx_DATAEEPROM_Unlock(void) +{ + if((FLASH->PECR & FLASH_PECR_PELOCK) != RESET) + { + /* Unlocking the Data memory and FLASH_PECR register access*/ + FLASH->PEKEYR = FLASH_PEKEY1; + FLASH->PEKEYR = FLASH_PEKEY2; + } + else + { + return HAL_ERROR; + } + return HAL_OK; +} + +/** + * @brief Locks the Data memory and FLASH_PECR register access. + * @retval HAL_StatusTypeDef HAL Status + */ +HAL_StatusTypeDef HAL_FLASHEx_DATAEEPROM_Lock(void) +{ + /* Set the PELOCK Bit to lock the data memory and FLASH_PECR register access */ + SET_BIT(FLASH->PECR, FLASH_PECR_PELOCK); + + return HAL_OK; +} + +/** + * @brief Erase a word in data memory. + * @param Address specifies the address to be erased. + * @param TypeErase Indicate the way to erase at a specified address. + * This parameter can be a value of @ref FLASH_Type_Program + * @note To correctly run this function, the @ref HAL_FLASHEx_DATAEEPROM_Unlock() function + * must be called before. + * Call the @ref HAL_FLASHEx_DATAEEPROM_Lock() to the data EEPROM access + * and Flash program erase control register access(recommended to protect + * the DATA_EEPROM against possible unwanted operation). + * @retval HAL_StatusTypeDef HAL Status + */ +HAL_StatusTypeDef HAL_FLASHEx_DATAEEPROM_Erase(uint32_t TypeErase, uint32_t Address) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TYPEPROGRAMDATA(TypeErase)); + assert_param(IS_FLASH_DATA_ADDRESS(Address)); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + + if(status == HAL_OK) + { + /* Clean the error context */ + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + + if(TypeErase == FLASH_TYPEERASEDATA_WORD) + { + /* Write 00000000h to valid address in the data memory */ + *(__IO uint32_t *) Address = 0x00000000; + } + + if(TypeErase == FLASH_TYPEERASEDATA_HALFWORD) + { + /* Write 0000h to valid address in the data memory */ + *(__IO uint16_t *) Address = (uint16_t)0x0000; + } + + if(TypeErase == FLASH_TYPEERASEDATA_BYTE) + { + /* Write 00h to valid address in the data memory */ + *(__IO uint8_t *) Address = (uint8_t)0x00; + } + + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + } + + /* Return the erase status */ + return status; +} + +/** + * @brief Program word at a specified address + * @note To correctly run this function, the @ref HAL_FLASHEx_DATAEEPROM_Unlock() function + * must be called before. + * Call the @ref HAL_FLASHEx_DATAEEPROM_Unlock() to he data EEPROM access + * and Flash program erase control register access(recommended to protect + * the DATA_EEPROM against possible unwanted operation). + * @note The function @ref HAL_FLASHEx_DATAEEPROM_EnableFixedTimeProgram() can be called before + * this function to configure the Fixed Time Programming. + * @param TypeProgram Indicate the way to program at a specified address. + * This parameter can be a value of @ref FLASHEx_Type_Program_Data + * @param Address specifies the address to be programmed. + * @param Data specifies the data to be programmed + * + * @retval HAL_StatusTypeDef HAL Status + */ + +HAL_StatusTypeDef HAL_FLASHEx_DATAEEPROM_Program(uint32_t TypeProgram, uint32_t Address, uint32_t Data) +{ + HAL_StatusTypeDef status = HAL_ERROR; + + /* Process Locked */ + __HAL_LOCK(&pFlash); + + /* Check the parameters */ + assert_param(IS_TYPEPROGRAMDATA(TypeProgram)); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + + if(status == HAL_OK) + { + /* Clean the error context */ + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + + if(TypeProgram == FLASH_TYPEPROGRAMDATA_FASTBYTE) + { + /*Program word (8-bit) at a specified address.*/ + status = FLASH_DATAEEPROM_FastProgramByte(Address, (uint8_t) Data); + } + + if(TypeProgram == FLASH_TYPEPROGRAMDATA_FASTHALFWORD) + { + /* Program halfword (16-bit) at a specified address.*/ + status = FLASH_DATAEEPROM_FastProgramHalfWord(Address, (uint16_t) Data); + } + + if(TypeProgram == FLASH_TYPEPROGRAMDATA_FASTWORD) + { + /* Program word (32-bit) at a specified address.*/ + status = FLASH_DATAEEPROM_FastProgramWord(Address, (uint32_t) Data); + } + + if(TypeProgram == FLASH_TYPEPROGRAMDATA_WORD) + { + /* Program word (32-bit) at a specified address.*/ + status = FLASH_DATAEEPROM_ProgramWord(Address, (uint32_t) Data); + } + + if(TypeProgram == FLASH_TYPEPROGRAMDATA_HALFWORD) + { + /* Program halfword (16-bit) at a specified address.*/ + status = FLASH_DATAEEPROM_ProgramHalfWord(Address, (uint16_t) Data); + } + + if(TypeProgram == FLASH_TYPEPROGRAMDATA_BYTE) + { + /* Program byte (8-bit) at a specified address.*/ + status = FLASH_DATAEEPROM_ProgramByte(Address, (uint8_t) Data); + } + } + + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + + return status; +} + +/** + * @brief Enable DATA EEPROM fixed Time programming (2*Tprog). + * @retval None + */ +void HAL_FLASHEx_DATAEEPROM_EnableFixedTimeProgram(void) +{ + SET_BIT(FLASH->PECR, FLASH_PECR_FTDW); +} + +/** + * @brief Disables DATA EEPROM fixed Time programming (2*Tprog). + * @retval None + */ +void HAL_FLASHEx_DATAEEPROM_DisableFixedTimeProgram(void) +{ + CLEAR_BIT(FLASH->PECR, FLASH_PECR_FTDW); +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup FLASHEx_Private_Functions + * @{ + */ + +/* +============================================================================== + OPTIONS BYTES +============================================================================== +*/ +/** + * @brief Enables or disables the read out protection. + * @note To correctly run this function, the @ref HAL_FLASH_OB_Unlock() function + * must be called before. + * @param OB_RDP specifies the read protection level. + * This parameter can be: + * @arg @ref OB_RDP_LEVEL_0 No protection + * @arg @ref OB_RDP_LEVEL_1 Read protection of the memory + * @arg @ref OB_RDP_LEVEL_2 Chip protection + * + * !!!Warning!!! When enabling OB_RDP_LEVEL_2 it's no more possible to go back to level 1 or 0 + * + * @retval HAL status + */ +static HAL_StatusTypeDef FLASH_OB_RDPConfig(uint8_t OB_RDP) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmp1 = 0, tmp2 = 0, tmp3 = 0; + + /* Check the parameters */ + assert_param(IS_OB_RDP(OB_RDP)); + + tmp1 = (uint32_t)(OB->RDP & FLASH_OBR_RDPRT); + + /* According to errata sheet, DocID022054 Rev 5, par2.1.5 + Before setting Level0 in the RDP register, check that the current level is not equal to Level0. + If the current level is not equal to Level0, Level0 can be activated. + If the current level is Level0 then the RDP register must not be written again with Level0. */ + + if ((tmp1 == OB_RDP_LEVEL_0) && (OB_RDP == OB_RDP_LEVEL_0)) + { + /*current level is Level0 then the RDP register must not be written again with Level0. */ + status = HAL_ERROR; + } + else + { +#if defined(FLASH_OBR_SPRMOD) + /* Mask SPRMOD bit */ + tmp3 = (uint32_t)(OB->RDP & FLASH_OBR_SPRMOD); +#endif + + /* calculate the option byte to write */ + tmp1 = (~((uint32_t)(OB_RDP | tmp3))); + tmp2 = (uint32_t)(((uint32_t)((uint32_t)(tmp1) << 16)) | ((uint32_t)(OB_RDP | tmp3))); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + + if(status == HAL_OK) + { + /* Clean the error context */ + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + + /* program read protection level */ + OB->RDP = tmp2; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + } + } + + /* Return the Read protection operation Status */ + return status; +} + +/** + * @brief Programs the FLASH brownout reset threshold level Option Byte. + * @param OB_BOR Selects the brownout reset threshold level. + * This parameter can be one of the following values: + * @arg @ref OB_BOR_OFF BOR is disabled at power down, the reset is asserted when the VDD + * power supply reaches the PDR(Power Down Reset) threshold (1.5V) + * @arg @ref OB_BOR_LEVEL1 BOR Reset threshold levels for 1.7V - 1.8V VDD power supply + * @arg @ref OB_BOR_LEVEL2 BOR Reset threshold levels for 1.9V - 2.0V VDD power supply + * @arg @ref OB_BOR_LEVEL3 BOR Reset threshold levels for 2.3V - 2.4V VDD power supply + * @arg @ref OB_BOR_LEVEL4 BOR Reset threshold levels for 2.55V - 2.65V VDD power supply + * @arg @ref OB_BOR_LEVEL5 BOR Reset threshold levels for 2.8V - 2.9V VDD power supply + * @retval HAL status + */ +static HAL_StatusTypeDef FLASH_OB_BORConfig(uint8_t OB_BOR) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmp = 0, tmp1 = 0; + + /* Check the parameters */ + assert_param(IS_OB_BOR_LEVEL(OB_BOR)); + + /* Get the User Option byte register */ + tmp1 = OB->USER & ((~FLASH_OBR_BOR_LEV) >> 16); + + /* Calculate the option byte to write - [0xFF | nUSER | 0x00 | USER]*/ + tmp = (uint32_t)~((OB_BOR | tmp1)) << 16; + tmp |= (OB_BOR | tmp1); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + + if(status == HAL_OK) + { + /* Clean the error context */ + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + + /* Write the BOR Option Byte */ + OB->USER = tmp; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + } + + /* Return the Option Byte BOR programmation Status */ + return status; +} + +/** + * @brief Returns the FLASH User Option Bytes values. + * @retval The FLASH User Option Bytes. + */ +static uint8_t FLASH_OB_GetUser(void) +{ + /* Return the User Option Byte */ + return (uint8_t)((FLASH->OBR & FLASH_OBR_USER) >> 16); +} + +/** + * @brief Returns the FLASH Read Protection level. + * @retval FLASH RDP level + * This parameter can be one of the following values: + * @arg @ref OB_RDP_LEVEL_0 No protection + * @arg @ref OB_RDP_LEVEL_1 Read protection of the memory + * @arg @ref OB_RDP_LEVEL_2 Full chip protection + */ +static uint8_t FLASH_OB_GetRDP(void) +{ + return (uint8_t)(FLASH->OBR & FLASH_OBR_RDPRT); +} + +/** + * @brief Returns the FLASH BOR level. + * @retval The BOR level Option Bytes. + */ +static uint8_t FLASH_OB_GetBOR(void) +{ + /* Return the BOR level */ + return (uint8_t)((FLASH->OBR & (uint32_t)FLASH_OBR_BOR_LEV) >> 16); +} + +/** + * @brief Write protects the desired pages of the first 64KB of the Flash. + * @param pOBInit pointer to an FLASH_OBInitStruct structure that + * contains WRP parameters. + * @param NewState new state of the specified FLASH Pages Wtite protection. + * This parameter can be: ENABLE or DISABLE. + * @retval HAL_StatusTypeDef + */ +static HAL_StatusTypeDef FLASH_OB_WRPConfig(FLASH_OBProgramInitTypeDef *pOBInit, FunctionalState NewState) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + + if(status == HAL_OK) + { + /* Clean the error context */ + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + + /* WRP for sector between 0 to 31 */ + if (pOBInit->WRPSector0To31 != 0) + { + FLASH_OB_WRPConfigWRP1OrPCROP1(pOBInit->WRPSector0To31, NewState); + } + +#if defined(STM32L100xC) || defined(STM32L151xC) || defined(STM32L152xC) || defined(STM32L162xC) \ + || defined(STM32L151xCA) || defined(STM32L151xD) || defined(STM32L151xDX) || defined(STM32L152xCA) \ + || defined(STM32L152xD) || defined(STM32L152xDX) || defined(STM32L162xCA) || defined(STM32L162xD) \ + || defined(STM32L162xDX) || defined(STM32L151xE) || defined(STM32L152xE) || defined(STM32L162xE) + + /* Pages for Cat3, Cat4 & Cat5 devices*/ + /* WRP for sector between 32 to 63 */ + if (pOBInit->WRPSector32To63 != 0) + { + FLASH_OB_WRPConfigWRP2OrPCROP2(pOBInit->WRPSector32To63, NewState); + } + +#endif /* STM32L100xC || STM32L151xC || STM32L152xC || (...) || STM32L151xE || STM32L152xE || STM32L162xE */ + +#if defined(STM32L151xD) || defined(STM32L151xDX) || defined(STM32L152xD) || defined(STM32L152xDX) \ + || defined(STM32L162xD) || defined(STM32L162xDX) || defined(STM32L151xE) || defined(STM32L152xE) \ + || defined(STM32L162xE) + + /* Pages for devices with FLASH >= 256KB*/ + /* WRP for sector between 64 to 95 */ + if (pOBInit->WRPSector64To95 != 0) + { + FLASH_OB_WRPConfigWRP3(pOBInit->WRPSector64To95, NewState); + } + +#endif /* STM32L151xD || STM32L152xD || STM32L162xD || STM32L151xE || STM32L152xE || STM32L162xE */ + +#if defined(STM32L151xE) || defined(STM32L152xE) || defined(STM32L162xE) || defined(STM32L151xDX) \ + || defined(STM32L152xDX) || defined(STM32L162xDX) + + /* Pages for Cat5 devices*/ + /* WRP for sector between 96 to 127 */ + if (pOBInit->WRPSector96To127 != 0) + { + FLASH_OB_WRPConfigWRP4(pOBInit->WRPSector96To127, NewState); + } + +#endif /* STM32L151xE || STM32L152xE || STM32L162xE || STM32L151xDX || ... */ + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + } + + /* Return the write protection operation Status */ + return status; +} + +#if defined(STM32L151xBA) || defined(STM32L152xBA) || defined(STM32L151xC) || defined(STM32L152xC) \ + || defined(STM32L162xC) +/** + * @brief Enables the read/write protection (PCROP) of the desired + * sectors. + * @note This function can be used only for Cat2 & Cat3 devices + * @param pAdvOBInit pointer to an FLASH_AdvOBProgramInitTypeDef structure that + * contains PCROP parameters. + * @param NewState new state of the specified FLASH Pages read/Write protection. + * This parameter can be: ENABLE or DISABLE. + * @retval HAL status + */ +static HAL_StatusTypeDef FLASH_OB_PCROPConfig(FLASH_AdvOBProgramInitTypeDef *pAdvOBInit, FunctionalState NewState) +{ + HAL_StatusTypeDef status = HAL_OK; + FunctionalState pcropstate = DISABLE; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + + /* Invert state to use same function of WRP */ + if (NewState == DISABLE) + { + pcropstate = ENABLE; + } + + if(status == HAL_OK) + { + /* Clean the error context */ + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + + /* Pages for Cat2 devices*/ + /* PCROP for sector between 0 to 31 */ + if (pAdvOBInit->PCROPSector0To31 != 0) + { + FLASH_OB_WRPConfigWRP1OrPCROP1(pAdvOBInit->PCROPSector0To31, pcropstate); + } + +#if defined(STM32L100xC) || defined(STM32L151xC) || defined(STM32L152xC) || defined(STM32L162xC) + + /* Pages for Cat3 devices*/ + /* WRP for sector between 32 to 63 */ + if (pAdvOBInit->PCROPSector32To63 != 0) + { + FLASH_OB_WRPConfigWRP2OrPCROP2(pAdvOBInit->PCROPSector32To63, pcropstate); + } + +#endif /* STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC */ + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + } + + /* Return the write protection operation Status */ + return status; +} +#endif /* STM32L151xBA || STM32L152xBA || STM32L151xC || STM32L152xC || STM32L162xC */ + +/** + * @brief Write protects the desired pages of the first 128KB of the Flash. + * @param WRP1OrPCROP1 specifies the address of the pages to be write protected. + * This parameter can be a combination of @ref FLASHEx_Option_Bytes_Write_Protection1 + * @param NewState new state of the specified FLASH Pages Write protection. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +static void FLASH_OB_WRPConfigWRP1OrPCROP1(uint32_t WRP1OrPCROP1, FunctionalState NewState) +{ + uint32_t wrp01data = 0, wrp23data = 0; + + uint32_t tmp1 = 0, tmp2 = 0; + + /* Check the parameters */ + assert_param(IS_OB_WRP(WRP1OrPCROP1)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + wrp01data = (uint16_t)(((WRP1OrPCROP1 & WRP_MASK_LOW) | OB->WRP01)); + wrp23data = (uint16_t)((((WRP1OrPCROP1 & WRP_MASK_HIGH)>>16 | OB->WRP23))); + tmp1 = (uint32_t)(~(wrp01data) << 16)|(wrp01data); + OB->WRP01 = tmp1; + + tmp2 = (uint32_t)(~(wrp23data) << 16)|(wrp23data); + OB->WRP23 = tmp2; + } + else + { + wrp01data = (uint16_t)(~WRP1OrPCROP1 & (WRP_MASK_LOW & OB->WRP01)); + wrp23data = (uint16_t)((((~WRP1OrPCROP1 & WRP_MASK_HIGH)>>16 & OB->WRP23))); + + tmp1 = (uint32_t)((~wrp01data) << 16)|(wrp01data); + OB->WRP01 = tmp1; + + tmp2 = (uint32_t)((~wrp23data) << 16)|(wrp23data); + OB->WRP23 = tmp2; + } +} + +#if defined(STM32L100xC) || defined(STM32L151xC) || defined(STM32L152xC) || defined(STM32L162xC) \ + || defined(STM32L151xCA) || defined(STM32L151xD) || defined(STM32L151xDX) || defined(STM32L152xCA) \ + || defined(STM32L152xD) || defined(STM32L152xDX) || defined(STM32L162xCA) || defined(STM32L162xD) \ + || defined(STM32L162xDX) || defined(STM32L151xE) || defined(STM32L152xE) || defined(STM32L162xE) +/** + * @brief Enable Write protects the desired pages of the second 128KB of the Flash. + * @note This function can be used only for Cat3, Cat4 & Cat5 devices. + * @param WRP2OrPCROP2 specifies the address of the pages to be write protected. + * This parameter can be a combination of @ref FLASHEx_Option_Bytes_Write_Protection2 + * @param NewState new state of the specified FLASH Pages Wtite protection. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +static void FLASH_OB_WRPConfigWRP2OrPCROP2(uint32_t WRP2OrPCROP2, FunctionalState NewState) +{ + uint32_t wrp45data = 0, wrp67data = 0; + + uint32_t tmp1 = 0, tmp2 = 0; + + /* Check the parameters */ + assert_param(IS_OB_WRP(WRP2OrPCROP2)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + wrp45data = (uint16_t)(((WRP2OrPCROP2 & WRP_MASK_LOW) | OB->WRP45)); + wrp67data = (uint16_t)((((WRP2OrPCROP2 & WRP_MASK_HIGH)>>16 | OB->WRP67))); + tmp1 = (uint32_t)(~(wrp45data) << 16)|(wrp45data); + OB->WRP45 = tmp1; + + tmp2 = (uint32_t)(~(wrp67data) << 16)|(wrp67data); + OB->WRP67 = tmp2; + } + else + { + wrp45data = (uint16_t)(~WRP2OrPCROP2 & (WRP_MASK_LOW & OB->WRP45)); + wrp67data = (uint16_t)((((~WRP2OrPCROP2 & WRP_MASK_HIGH)>>16 & OB->WRP67))); + + tmp1 = (uint32_t)((~wrp45data) << 16)|(wrp45data); + OB->WRP45 = tmp1; + + tmp2 = (uint32_t)((~wrp67data) << 16)|(wrp67data); + OB->WRP67 = tmp2; + } +} +#endif /* STM32L100xC || STM32L151xC || STM32L152xC || (...) || STM32L151xE || STM32L152xE || STM32L162xE */ + +#if defined(STM32L151xD) || defined(STM32L151xDX) || defined(STM32L152xD) || defined(STM32L152xDX) \ + || defined(STM32L162xD) || defined(STM32L162xDX) || defined(STM32L151xE) || defined(STM32L152xE) \ + || defined(STM32L162xE) +/** + * @brief Enable Write protects the desired pages of the third 128KB of the Flash. + * @note This function can be used only for STM32L151xD, STM32L152xD, STM32L162xD & Cat5 devices. + * @param WRP3 specifies the address of the pages to be write protected. + * This parameter can be a combination of @ref FLASHEx_Option_Bytes_Write_Protection3 + * @param NewState new state of the specified FLASH Pages Wtite protection. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +static void FLASH_OB_WRPConfigWRP3(uint32_t WRP3, FunctionalState NewState) +{ + uint32_t wrp89data = 0, wrp1011data = 0; + + uint32_t tmp1 = 0, tmp2 = 0; + + /* Check the parameters */ + assert_param(IS_OB_WRP(WRP3)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + wrp89data = (uint16_t)(((WRP3 & WRP_MASK_LOW) | OB->WRP89)); + wrp1011data = (uint16_t)((((WRP3 & WRP_MASK_HIGH)>>16 | OB->WRP1011))); + tmp1 = (uint32_t)(~(wrp89data) << 16)|(wrp89data); + OB->WRP89 = tmp1; + + tmp2 = (uint32_t)(~(wrp1011data) << 16)|(wrp1011data); + OB->WRP1011 = tmp2; + } + else + { + wrp89data = (uint16_t)(~WRP3 & (WRP_MASK_LOW & OB->WRP89)); + wrp1011data = (uint16_t)((((~WRP3 & WRP_MASK_HIGH)>>16 & OB->WRP1011))); + + tmp1 = (uint32_t)((~wrp89data) << 16)|(wrp89data); + OB->WRP89 = tmp1; + + tmp2 = (uint32_t)((~wrp1011data) << 16)|(wrp1011data); + OB->WRP1011 = tmp2; + } +} +#endif /* STM32L151xD || STM32L152xD || STM32L162xD || STM32L151xE || STM32L152xE || STM32L162xE */ + +#if defined(STM32L151xE) || defined(STM32L152xE) || defined(STM32L162xE) || defined(STM32L151xDX) \ + || defined(STM32L152xDX) || defined(STM32L162xDX) +/** + * @brief Enable Write protects the desired pages of the Fourth 128KB of the Flash. + * @note This function can be used only for Cat5 & STM32L1xxDX devices. + * @param WRP4 specifies the address of the pages to be write protected. + * This parameter can be a combination of @ref FLASHEx_Option_Bytes_Write_Protection4 + * @param NewState new state of the specified FLASH Pages Wtite protection. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +static void FLASH_OB_WRPConfigWRP4(uint32_t WRP4, FunctionalState NewState) +{ + uint32_t wrp1213data = 0, wrp1415data = 0; + + uint32_t tmp1 = 0, tmp2 = 0; + + /* Check the parameters */ + assert_param(IS_OB_WRP(WRP4)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + wrp1213data = (uint16_t)(((WRP4 & WRP_MASK_LOW) | OB->WRP1213)); + wrp1415data = (uint16_t)((((WRP4 & WRP_MASK_HIGH)>>16 | OB->WRP1415))); + tmp1 = (uint32_t)(~(wrp1213data) << 16)|(wrp1213data); + OB->WRP1213 = tmp1; + + tmp2 = (uint32_t)(~(wrp1415data) << 16)|(wrp1415data); + OB->WRP1415 = tmp2; + } + else + { + wrp1213data = (uint16_t)(~WRP4 & (WRP_MASK_LOW & OB->WRP1213)); + wrp1415data = (uint16_t)((((~WRP4 & WRP_MASK_HIGH)>>16 & OB->WRP1415))); + + tmp1 = (uint32_t)((~wrp1213data) << 16)|(wrp1213data); + OB->WRP1213 = tmp1; + + tmp2 = (uint32_t)((~wrp1415data) << 16)|(wrp1415data); + OB->WRP1415 = tmp2; + } +} +#endif /* STM32L151xE || STM32L152xE || STM32L162xE || STM32L151xDX || ... */ + +/** + * @brief Programs the FLASH User Option Byte: IWDG_SW / RST_STOP / RST_STDBY. + * @param OB_IWDG Selects the WDG mode. + * This parameter can be one of the following values: + * @arg @ref OB_IWDG_SW Software WDG selected + * @arg @ref OB_IWDG_HW Hardware WDG selected + * @param OB_STOP Reset event when entering STOP mode. + * This parameter can be one of the following values: + * @arg @ref OB_STOP_NORST No reset generated when entering in STOP + * @arg @ref OB_STOP_RST Reset generated when entering in STOP + * @param OB_STDBY Reset event when entering Standby mode. + * This parameter can be one of the following values: + * @arg @ref OB_STDBY_NORST No reset generated when entering in STANDBY + * @arg @ref OB_STDBY_RST Reset generated when entering in STANDBY + * @retval HAL status + */ +static HAL_StatusTypeDef FLASH_OB_UserConfig(uint8_t OB_IWDG, uint8_t OB_STOP, uint8_t OB_STDBY) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmp = 0, tmp1 = 0; + + /* Check the parameters */ + assert_param(IS_OB_IWDG_SOURCE(OB_IWDG)); + assert_param(IS_OB_STOP_SOURCE(OB_STOP)); + assert_param(IS_OB_STDBY_SOURCE(OB_STDBY)); + + /* Get the User Option byte register */ + tmp1 = OB->USER & ((~FLASH_OBR_USER) >> 16); + + /* Calculate the user option byte to write */ + tmp = (uint32_t)(((uint32_t)~((uint32_t)((uint32_t)(OB_IWDG) | (uint32_t)(OB_STOP) | (uint32_t)(OB_STDBY) | tmp1))) << 16); + tmp |= ((uint32_t)(OB_IWDG) | ((uint32_t)OB_STOP) | (uint32_t)(OB_STDBY) | tmp1); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + + if(status == HAL_OK) + { + /* Clean the error context */ + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + + /* Write the User Option Byte */ + OB->USER = tmp; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + } + + /* Return the Option Byte program Status */ + return status; +} + +#if defined(FLASH_OBR_nRST_BFB2) +/** + * @brief Configures to boot from Bank1 or Bank2. + * @param OB_BOOT select the FLASH Bank to boot from. + * This parameter can be one of the following values: + * @arg @ref OB_BOOT_BANK2 At startup, if boot pins are set in boot from user Flash + * position and this parameter is selected the device will boot from Bank2 or Bank1, + * depending on the activation of the bank. The active banks are checked in + * the following order: Bank2, followed by Bank1. + * The active bank is recognized by the value programmed at the base address + * of the respective bank (corresponding to the initial stack pointer value + * in the interrupt vector table). + * @arg @ref OB_BOOT_BANK1 At startup, if boot pins are set in boot from user Flash + * position and this parameter is selected the device will boot from Bank1(Default). + * For more information, please refer to AN2606 from www.st.com. + * @retval HAL status + */ +static HAL_StatusTypeDef FLASH_OB_BootConfig(uint8_t OB_BOOT) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmp = 0, tmp1 = 0; + + /* Check the parameters */ + assert_param(IS_OB_BOOT_BANK(OB_BOOT)); + + /* Get the User Option byte register and BOR Level*/ + tmp1 = OB->USER & ((~FLASH_OBR_nRST_BFB2) >> 16); + + /* Calculate the option byte to write */ + tmp = (uint32_t)~(OB_BOOT | tmp1) << 16; + tmp |= (OB_BOOT | tmp1); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + + if(status == HAL_OK) + { + /* Clean the error context */ + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + + /* Write the BOOT Option Byte */ + OB->USER = tmp; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + } + + /* Return the Option Byte program Status */ + return status; +} + +#endif /* FLASH_OBR_nRST_BFB2 */ + +/* +============================================================================== + DATA +============================================================================== +*/ + +/** + * @brief Write a Byte at a specified address in data memory. + * @param Address specifies the address to be written. + * @param Data specifies the data to be written. + * @note This function assumes that the is data word is already erased. + * @retval HAL status + */ +static HAL_StatusTypeDef FLASH_DATAEEPROM_FastProgramByte(uint32_t Address, uint8_t Data) +{ + HAL_StatusTypeDef status = HAL_OK; +#if defined(STM32L100xB) || defined(STM32L151xB) || defined(STM32L152xB) + uint32_t tmp = 0, tmpaddr = 0; +#endif /* STM32L100xB || STM32L151xB || STM32L152xB */ + + /* Check the parameters */ + assert_param(IS_FLASH_DATA_ADDRESS(Address)); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + + if(status == HAL_OK) + { + /* Clear the FTDW bit */ + CLEAR_BIT(FLASH->PECR, FLASH_PECR_FTDW); + +#if defined(STM32L100xB) || defined(STM32L151xB) || defined(STM32L152xB) + /* Possible only on Cat1 devices */ + if(Data != (uint8_t)0x00) + { + /* If the previous operation is completed, proceed to write the new Data */ + *(__IO uint8_t *)Address = Data; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + } + else + { + tmpaddr = Address & 0xFFFFFFFC; + tmp = * (__IO uint32_t *) tmpaddr; + tmpaddr = 0xFF << ((uint32_t) (0x8 * (Address & 0x3))); + tmp &= ~tmpaddr; + status = HAL_FLASHEx_DATAEEPROM_Erase(FLASH_TYPEERASEDATA_WORD, Address & 0xFFFFFFFC); + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + status = HAL_FLASHEx_DATAEEPROM_Program(FLASH_TYPEPROGRAMDATA_FASTWORD, (Address & 0xFFFFFFFC), tmp); + /* Process Locked */ + __HAL_LOCK(&pFlash); + } +#else /*!Cat1*/ + /* If the previous operation is completed, proceed to write the new Data */ + *(__IO uint8_t *)Address = Data; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); +#endif /* STM32L100xB || STM32L151xB || STM32L152xB */ + } + /* Return the Write Status */ + return status; +} + +/** + * @brief Writes a half word at a specified address in data memory. + * @param Address specifies the address to be written. + * @param Data specifies the data to be written. + * @note This function assumes that the is data word is already erased. + * @retval HAL status + */ +static HAL_StatusTypeDef FLASH_DATAEEPROM_FastProgramHalfWord(uint32_t Address, uint16_t Data) +{ + HAL_StatusTypeDef status = HAL_OK; +#if defined(STM32L100xB) || defined(STM32L151xB) || defined(STM32L152xB) + uint32_t tmp = 0, tmpaddr = 0; +#endif /* STM32L100xB || STM32L151xB || STM32L152xB */ + + /* Check the parameters */ + assert_param(IS_FLASH_DATA_ADDRESS(Address)); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + + if(status == HAL_OK) + { + /* Clear the FTDW bit */ + CLEAR_BIT(FLASH->PECR, FLASH_PECR_FTDW); + +#if defined(STM32L100xB) || defined(STM32L151xB) || defined(STM32L152xB) + /* Possible only on Cat1 devices */ + if(Data != (uint16_t)0x0000) + { + /* If the previous operation is completed, proceed to write the new data */ + *(__IO uint16_t *)Address = Data; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + } + else + { + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + if((Address & 0x3) != 0x3) + { + tmpaddr = Address & 0xFFFFFFFC; + tmp = * (__IO uint32_t *) tmpaddr; + tmpaddr = 0xFFFF << ((uint32_t) (0x8 * (Address & 0x3))); + tmp &= ~tmpaddr; + status = HAL_FLASHEx_DATAEEPROM_Erase(FLASH_TYPEERASEDATA_WORD, Address & 0xFFFFFFFC); + status = HAL_FLASHEx_DATAEEPROM_Program(FLASH_TYPEPROGRAMDATA_FASTWORD, (Address & 0xFFFFFFFC), tmp); + } + else + { + HAL_FLASHEx_DATAEEPROM_Program(FLASH_TYPEPROGRAMDATA_FASTBYTE, Address, 0x00); + HAL_FLASHEx_DATAEEPROM_Program(FLASH_TYPEPROGRAMDATA_FASTBYTE, Address + 1, 0x00); + } + /* Process Locked */ + __HAL_LOCK(&pFlash); + } +#else /* !Cat1 */ + /* If the previous operation is completed, proceed to write the new data */ + *(__IO uint16_t *)Address = Data; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); +#endif /* STM32L100xB || STM32L151xB || STM32L152xB */ + } + /* Return the Write Status */ + return status; +} + +/** + * @brief Programs a word at a specified address in data memory. + * @param Address specifies the address to be written. + * @param Data specifies the data to be written. + * @note This function assumes that the is data word is already erased. + * @retval HAL status + */ +static HAL_StatusTypeDef FLASH_DATAEEPROM_FastProgramWord(uint32_t Address, uint32_t Data) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_FLASH_DATA_ADDRESS(Address)); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + + if(status == HAL_OK) + { + /* Clear the FTDW bit */ + CLEAR_BIT(FLASH->PECR, FLASH_PECR_FTDW); + + /* If the previous operation is completed, proceed to program the new data */ + *(__IO uint32_t *)Address = Data; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + } + /* Return the Write Status */ + return status; +} + +/** + * @brief Write a Byte at a specified address in data memory without erase. + * @param Address specifies the address to be written. + * @param Data specifies the data to be written. + * @retval HAL status + */ +static HAL_StatusTypeDef FLASH_DATAEEPROM_ProgramByte(uint32_t Address, uint8_t Data) +{ + HAL_StatusTypeDef status = HAL_OK; +#if defined(STM32L100xB) || defined(STM32L151xB) || defined(STM32L152xB) + uint32_t tmp = 0, tmpaddr = 0; +#endif /* STM32L100xB || STM32L151xB || STM32L152xB */ + + /* Check the parameters */ + assert_param(IS_FLASH_DATA_ADDRESS(Address)); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + + if(status == HAL_OK) + { +#if defined(STM32L100xB) || defined(STM32L151xB) || defined(STM32L152xB) + if(Data != (uint8_t) 0x00) + { + *(__IO uint8_t *)Address = Data; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + + } + else + { + tmpaddr = Address & 0xFFFFFFFC; + tmp = * (__IO uint32_t *) tmpaddr; + tmpaddr = 0xFF << ((uint32_t) (0x8 * (Address & 0x3))); + tmp &= ~tmpaddr; + status = HAL_FLASHEx_DATAEEPROM_Erase(FLASH_TYPEERASEDATA_WORD, Address & 0xFFFFFFFC); + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + status = HAL_FLASHEx_DATAEEPROM_Program(FLASH_TYPEPROGRAMDATA_FASTWORD, (Address & 0xFFFFFFFC), tmp); + /* Process Locked */ + __HAL_LOCK(&pFlash); + } +#else /* Not Cat1*/ + *(__IO uint8_t *)Address = Data; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); +#endif /* STM32L100xB || STM32L151xB || STM32L152xB */ + } + /* Return the Write Status */ + return status; +} + +/** + * @brief Writes a half word at a specified address in data memory without erase. + * @param Address specifies the address to be written. + * @param Data specifies the data to be written. + * @retval HAL status + */ +static HAL_StatusTypeDef FLASH_DATAEEPROM_ProgramHalfWord(uint32_t Address, uint16_t Data) +{ + HAL_StatusTypeDef status = HAL_OK; +#if defined(STM32L100xB) || defined(STM32L151xB) || defined(STM32L152xB) + uint32_t tmp = 0, tmpaddr = 0; +#endif /* STM32L100xB || STM32L151xB || STM32L152xB */ + + /* Check the parameters */ + assert_param(IS_FLASH_DATA_ADDRESS(Address)); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + + if(status == HAL_OK) + { +#if defined(STM32L100xB) || defined(STM32L151xB) || defined(STM32L152xB) + if(Data != (uint16_t)0x0000) + { + *(__IO uint16_t *)Address = Data; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + } + else + { + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + if((Address & 0x3) != 0x3) + { + tmpaddr = Address & 0xFFFFFFFC; + tmp = * (__IO uint32_t *) tmpaddr; + tmpaddr = 0xFFFF << ((uint32_t) (0x8 * (Address & 0x3))); + tmp &= ~tmpaddr; + status = HAL_FLASHEx_DATAEEPROM_Erase(FLASH_TYPEERASEDATA_WORD, Address & 0xFFFFFFFC); + status = HAL_FLASHEx_DATAEEPROM_Program(FLASH_TYPEPROGRAMDATA_FASTWORD, (Address & 0xFFFFFFFC), tmp); + } + else + { + HAL_FLASHEx_DATAEEPROM_Program(FLASH_TYPEPROGRAMDATA_FASTBYTE, Address, 0x00); + HAL_FLASHEx_DATAEEPROM_Program(FLASH_TYPEPROGRAMDATA_FASTBYTE, Address + 1, 0x00); + } + /* Process Locked */ + __HAL_LOCK(&pFlash); + } +#else /* Not Cat1*/ + *(__IO uint16_t *)Address = Data; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); +#endif /* STM32L100xB || STM32L151xB || STM32L152xB */ + } + /* Return the Write Status */ + return status; +} + +/** + * @brief Programs a word at a specified address in data memory without erase. + * @param Address specifies the address to be written. + * @param Data specifies the data to be written. + * @retval HAL status + */ +static HAL_StatusTypeDef FLASH_DATAEEPROM_ProgramWord(uint32_t Address, uint32_t Data) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_FLASH_DATA_ADDRESS(Address)); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + + if(status == HAL_OK) + { + *(__IO uint32_t *)Address = Data; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + } + /* Return the Write Status */ + return status; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup FLASH + * @{ + */ + + +/** @addtogroup FLASH_Private_Functions + * @{ + */ + +/** + * @brief Erases a specified page in program memory. + * @param PageAddress The page address in program memory to be erased. + * @note A Page is erased in the Program memory only if the address to load + * is the start address of a page (multiple of @ref FLASH_PAGE_SIZE bytes). + * @retval None + */ +void FLASH_PageErase(uint32_t PageAddress) +{ + /* Clean the error context */ + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + + /* Set the ERASE bit */ + SET_BIT(FLASH->PECR, FLASH_PECR_ERASE); + + /* Set PROG bit */ + SET_BIT(FLASH->PECR, FLASH_PECR_PROG); + + /* Write 00000000h to the first word of the program page to erase */ + *(__IO uint32_t *)(uint32_t)(PageAddress & ~(FLASH_PAGE_SIZE - 1)) = 0x00000000; +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_FLASH_MODULE_ENABLED */ +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_flash_ramfunc.c b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_flash_ramfunc.c new file mode 100755 index 0000000..382ffce --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_flash_ramfunc.c @@ -0,0 +1,674 @@ +/** + ****************************************************************************** + * @file stm32l1xx_hal_flash_ramfunc.c + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief FLASH RAMFUNC driver. + * This file provides a Flash firmware functions which should be + * executed from internal SRAM + * + * @verbatim + + *** ARM Compiler *** + -------------------- + [..] RAM functions are defined using the toolchain options. + Functions that are be executed in RAM should reside in a separate + source module. Using the 'Options for File' dialog you can simply change + the 'Code / Const' area of a module to a memory space in physical RAM. + Available memory areas are declared in the 'Target' tab of the + Options for Target' dialog. + + *** ICCARM Compiler *** + ----------------------- + [..] RAM functions are defined using a specific toolchain keyword "__ramfunc". + + *** GNU Compiler *** + -------------------- + [..] RAM functions are defined using a specific toolchain attribute + "__attribute__((section(".RamFunc")))". + +@endverbatim + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_hal.h" + +/** @addtogroup STM32L1xx_HAL_Driver + * @{ + */ + +#ifdef HAL_FLASH_MODULE_ENABLED + +/** @addtogroup FLASH + * @{ + */ +/** @addtogroup FLASH_Private_Variables + * @{ + */ +extern FLASH_ProcessTypeDef pFlash; +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup FLASH_RAMFUNC FLASH_RAMFUNC + * @brief FLASH functions executed from RAM + * @{ + */ + + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup FLASH_RAMFUNC_Private_Functions FLASH RAM Private Functions + * @{ + */ + +static __RAM_FUNC FLASHRAM_WaitForLastOperation(uint32_t Timeout); +static __RAM_FUNC FLASHRAM_SetErrorCode(void); + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup FLASH_RAMFUNC_Exported_Functions FLASH RAM Exported Functions + * +@verbatim + =============================================================================== + ##### ramfunc functions ##### + =============================================================================== + [..] + This subsection provides a set of functions that should be executed from RAM + transfers. + +@endverbatim + * @{ + */ + +/** @defgroup FLASH_RAMFUNC_Exported_Functions_Group1 Peripheral features functions + * @{ + */ + +/** + * @brief Enable the power down mode during RUN mode. + * @note This function can be used only when the user code is running from Internal SRAM. + * @retval HAL status + */ +__RAM_FUNC HAL_FLASHEx_EnableRunPowerDown(void) +{ + /* Enable the Power Down in Run mode*/ + __HAL_FLASH_POWER_DOWN_ENABLE(); + + return HAL_OK; +} + +/** + * @brief Disable the power down mode during RUN mode. + * @note This function can be used only when the user code is running from Internal SRAM. + * @retval HAL status + */ +__RAM_FUNC HAL_FLASHEx_DisableRunPowerDown(void) +{ + /* Disable the Power Down in Run mode*/ + __HAL_FLASH_POWER_DOWN_DISABLE(); + + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup FLASH_RAMFUNC_Exported_Functions_Group2 Programming and erasing operation functions + * +@verbatim +@endverbatim + * @{ + */ + +#if defined(FLASH_PECR_PARALLBANK) +/** + * @brief Erases a specified 2 pages in program memory in parallel. + * @note This function can be used only for STM32L151xD, STM32L152xD), STM32L162xD and Cat5 devices. + * To correctly run this function, the @ref HAL_FLASH_Unlock() function + * must be called before. + * Call the @ref HAL_FLASH_Lock() to disable the flash memory access + * (recommended to protect the FLASH memory against possible unwanted operation). + * @param Page_Address1: The page address in program memory to be erased in + * the first Bank (BANK1). This parameter should be between FLASH_BASE + * and FLASH_BANK1_END. + * @param Page_Address2: The page address in program memory to be erased in + * the second Bank (BANK2). This parameter should be between FLASH_BANK2_BASE + * and FLASH_BANK2_END. + * @note A Page is erased in the Program memory only if the address to load + * is the start address of a page (multiple of @ref FLASH_PAGE_SIZE bytes). + * @retval HAL status + */ +__RAM_FUNC HAL_FLASHEx_EraseParallelPage(uint32_t Page_Address1, uint32_t Page_Address2) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Wait for last operation to be completed */ + status = FLASHRAM_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + + if(status == HAL_OK) + { + /* Proceed to erase the page */ + SET_BIT(FLASH->PECR, FLASH_PECR_PARALLBANK); + SET_BIT(FLASH->PECR, FLASH_PECR_ERASE); + SET_BIT(FLASH->PECR, FLASH_PECR_PROG); + + /* Write 00000000h to the first word of the first program page to erase */ + *(__IO uint32_t *)Page_Address1 = 0x00000000; + /* Write 00000000h to the first word of the second program page to erase */ + *(__IO uint32_t *)Page_Address2 = 0x00000000; + + /* Wait for last operation to be completed */ + status = FLASHRAM_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + + /* If the erase operation is completed, disable the ERASE, PROG and PARALLBANK bits */ + CLEAR_BIT(FLASH->PECR, FLASH_PECR_PROG); + CLEAR_BIT(FLASH->PECR, FLASH_PECR_ERASE); + CLEAR_BIT(FLASH->PECR, FLASH_PECR_PARALLBANK); + } + /* Return the Erase Status */ + return status; +} + +/** + * @brief Program 2 half pages in program memory in parallel (half page size is 32 Words). + * @note This function can be used only for STM32L151xD, STM32L152xD), STM32L162xD and Cat5 devices. + * @param Address1: specifies the first address to be written in the first bank + * (BANK1). This parameter should be between FLASH_BASE and (FLASH_BANK1_END - FLASH_PAGE_SIZE). + * @param pBuffer1: pointer to the buffer containing the data to be written + * to the first half page in the first bank. + * @param Address2: specifies the second address to be written in the second bank + * (BANK2). This parameter should be between FLASH_BANK2_BASE and (FLASH_BANK2_END - FLASH_PAGE_SIZE). + * @param pBuffer2: pointer to the buffer containing the data to be written + * to the second half page in the second bank. + * @note To correctly run this function, the @ref HAL_FLASH_Unlock() function + * must be called before. + * Call the @ref HAL_FLASH_Lock() to disable the flash memory access + * (recommended to protect the FLASH memory against possible unwanted operation). + * @note Half page write is possible only from SRAM. + * @note If there are more than 32 words to write, after 32 words another + * Half Page programming operation starts and has to be finished. + * @note A half page is written to the program memory only if the first + * address to load is the start address of a half page (multiple of 128 + * bytes) and the 31 remaining words to load are in the same half page. + * @note During the Program memory half page write all read operations are + * forbidden (this includes DMA read operations and debugger read + * operations such as breakpoints, periodic updates, etc.). + * @note If a PGAERR is set during a Program memory half page write, the + * complete write operation is aborted. Software should then reset the + * FPRG and PROG/DATA bits and restart the write operation from the + * beginning. + * @retval HAL status + */ +__RAM_FUNC HAL_FLASHEx_ProgramParallelHalfPage(uint32_t Address1, uint32_t* pBuffer1, uint32_t Address2, uint32_t* pBuffer2) +{ + uint32_t count = 0; + HAL_StatusTypeDef status = HAL_OK; + + /* Set the DISMCYCINT[0] bit in the Auxillary Control Register (0xE000E008) + This bit prevents the interruption of multicycle instructions and therefore + will increase the interrupt latency. of Cortex-M3. */ + SET_BIT(SCnSCB->ACTLR, SCnSCB_ACTLR_DISMCYCINT_Msk); + + /* Wait for last operation to be completed */ + status = FLASHRAM_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + + if(status == HAL_OK) + { + /* Proceed to program the new half page */ + SET_BIT(FLASH->PECR, FLASH_PECR_PARALLBANK); + SET_BIT(FLASH->PECR, FLASH_PECR_FPRG); + SET_BIT(FLASH->PECR, FLASH_PECR_PROG); + + /* Wait for last operation to be completed */ + status = FLASHRAM_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + if(status == HAL_OK) + { + /* Disable all IRQs */ + __disable_irq(); + + /* Write the first half page directly with 32 different words */ + while(count < 32) + { + *(__IO uint32_t*) ((uint32_t)(Address1 + (4 * count))) = *pBuffer1; + pBuffer1++; + count ++; + } + + /* Write the second half page directly with 32 different words */ + count = 0; + while(count < 32) + { + *(__IO uint32_t*) ((uint32_t)(Address2 + (4 * count))) = *pBuffer2; + pBuffer2++; + count ++; + } + + /* Enable IRQs */ + __enable_irq(); + + /* Wait for last operation to be completed */ + status = FLASHRAM_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + } + + /* if the write operation is completed, disable the PROG, FPRG and PARALLBANK bits */ + CLEAR_BIT(FLASH->PECR, FLASH_PECR_PROG); + CLEAR_BIT(FLASH->PECR, FLASH_PECR_FPRG); + CLEAR_BIT(FLASH->PECR, FLASH_PECR_PARALLBANK); + } + + CLEAR_BIT(SCnSCB->ACTLR, SCnSCB_ACTLR_DISMCYCINT_Msk); + + /* Return the Write Status */ + return status; +} +#endif /* FLASH_PECR_PARALLBANK */ + +/** + * @brief Program a half page in program memory. + * @param Address: specifies the address to be written. + * @param pBuffer: pointer to the buffer containing the data to be written to + * the half page. + * @note To correctly run this function, the @ref HAL_FLASH_Unlock() function + * must be called before. + * Call the @ref HAL_FLASH_Lock() to disable the flash memory access + * (recommended to protect the FLASH memory against possible unwanted operation) + * @note Half page write is possible only from SRAM. + * @note If there are more than 32 words to write, after 32 words another + * Half Page programming operation starts and has to be finished. + * @note A half page is written to the program memory only if the first + * address to load is the start address of a half page (multiple of 128 + * bytes) and the 31 remaining words to load are in the same half page. + * @note During the Program memory half page write all read operations are + * forbidden (this includes DMA read operations and debugger read + * operations such as breakpoints, periodic updates, etc.). + * @note If a PGAERR is set during a Program memory half page write, the + * complete write operation is aborted. Software should then reset the + * FPRG and PROG/DATA bits and restart the write operation from the + * beginning. + * @retval HAL status + */ +__RAM_FUNC HAL_FLASHEx_HalfPageProgram(uint32_t Address, uint32_t* pBuffer) +{ + uint32_t count = 0; + HAL_StatusTypeDef status = HAL_OK; + + /* Set the DISMCYCINT[0] bit in the Auxillary Control Register (0xE000E008) + This bit prevents the interruption of multicycle instructions and therefore + will increase the interrupt latency. of Cortex-M3. */ + SET_BIT(SCnSCB->ACTLR, SCnSCB_ACTLR_DISMCYCINT_Msk); + + /* Wait for last operation to be completed */ + status = FLASHRAM_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + + if(status == HAL_OK) + { + /* Proceed to program the new half page */ + SET_BIT(FLASH->PECR, FLASH_PECR_FPRG); + SET_BIT(FLASH->PECR, FLASH_PECR_PROG); + + /* Disable all IRQs */ + __disable_irq(); + + /* Write one half page directly with 32 different words */ + while(count < 32) + { + *(__IO uint32_t*) ((uint32_t)(Address + (4 * count))) = *pBuffer; + pBuffer++; + count ++; + } + + /* Enable IRQs */ + __enable_irq(); + + /* Wait for last operation to be completed */ + status = FLASHRAM_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + + /* If the write operation is completed, disable the PROG and FPRG bits */ + CLEAR_BIT(FLASH->PECR, FLASH_PECR_PROG); + CLEAR_BIT(FLASH->PECR, FLASH_PECR_FPRG); + } + + CLEAR_BIT(SCnSCB->ACTLR, SCnSCB_ACTLR_DISMCYCINT_Msk); + + /* Return the Write Status */ + return status; +} + +/** + * @} + */ + +/** @defgroup FLASH_RAMFUNC_Exported_Functions_Group3 Peripheral errors functions + * @brief Peripheral errors functions + * +@verbatim + =============================================================================== + ##### Peripheral errors functions ##### + =============================================================================== + [..] + This subsection permit to get in run-time errors of the FLASH peripheral. + +@endverbatim + * @{ + */ + +/** + * @brief Get the specific FLASH errors flag. + * @param Error pointer is the error value. It can be a mixed of: +@if STM32L100xB +@elif STM32L100xBA + * @arg @ref HAL_FLASH_ERROR_RD FLASH Read Protection error flag (PCROP) +@elif STM32L151xB +@elif STM32L151xBA + * @arg @ref HAL_FLASH_ERROR_RD FLASH Read Protection error flag (PCROP) +@elif STM32L152xB +@elif STM32L152xBA + * @arg @ref HAL_FLASH_ERROR_RD FLASH Read Protection error flag (PCROP) +@elif STM32L100xC + * @arg @ref HAL_FLASH_ERROR_RD FLASH Read Protection error flag (PCROP) + * @arg @ref HAL_FLASH_ERROR_OPTVUSR FLASH Option User validity error +@elif STM32L151xC + * @arg @ref HAL_FLASH_ERROR_RD FLASH Read Protection error flag (PCROP) + * @arg @ref HAL_FLASH_ERROR_OPTVUSR FLASH Option User validity error +@elif STM32L152xC + * @arg @ref HAL_FLASH_ERROR_RD FLASH Read Protection error flag (PCROP) + * @arg @ref HAL_FLASH_ERROR_OPTVUSR FLASH Option User validity error +@elif STM32L162xC + * @arg @ref HAL_FLASH_ERROR_RD FLASH Read Protection error flag (PCROP) + * @arg @ref HAL_FLASH_ERROR_OPTVUSR FLASH Option User validity error +@else + * @arg @ref HAL_FLASH_ERROR_OPTVUSR FLASH Option User validity error +@endif + * @arg @ref HAL_FLASH_ERROR_PGA FLASH Programming Alignment error flag + * @arg @ref HAL_FLASH_ERROR_WRP FLASH Write protected error flag + * @arg @ref HAL_FLASH_ERROR_OPTV FLASH Option valid error flag + * @retval HAL Status + */ +__RAM_FUNC HAL_FLASHEx_GetError(uint32_t * Error) +{ + *Error = pFlash.ErrorCode; + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup FLASH_RAMFUNC_Exported_Functions_Group4 DATA EEPROM functions + * + * @{ + */ + +/** + * @brief Erase a double word in data memory. + * @param Address: specifies the address to be erased. + * @note To correctly run this function, the HAL_FLASH_EEPROM_Unlock() function + * must be called before. + * Call the HAL_FLASH_EEPROM_Lock() to he data EEPROM access + * and Flash program erase control register access(recommended to protect + * the DATA_EEPROM against possible unwanted operation). + * @note Data memory double word erase is possible only from SRAM. + * @note A double word is erased to the data memory only if the first address + * to load is the start address of a double word (multiple of 8 bytes). + * @note During the Data memory double word erase, all read operations are + * forbidden (this includes DMA read operations and debugger read + * operations such as breakpoints, periodic updates, etc.). + * @retval HAL status + */ + +__RAM_FUNC HAL_FLASHEx_DATAEEPROM_EraseDoubleWord(uint32_t Address) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Set the DISMCYCINT[0] bit in the Auxillary Control Register (0xE000E008) + This bit prevents the interruption of multicycle instructions and therefore + will increase the interrupt latency. of Cortex-M3. */ + SET_BIT(SCnSCB->ACTLR, SCnSCB_ACTLR_DISMCYCINT_Msk); + + /* Wait for last operation to be completed */ + status = FLASHRAM_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + + if(status == HAL_OK) + { + /* If the previous operation is completed, proceed to erase the next double word */ + /* Set the ERASE bit */ + SET_BIT(FLASH->PECR, FLASH_PECR_ERASE); + + /* Set DATA bit */ + SET_BIT(FLASH->PECR, FLASH_PECR_DATA); + + /* Write 00000000h to the 2 words to erase */ + *(__IO uint32_t *)Address = 0x00000000; + Address += 4; + *(__IO uint32_t *)Address = 0x00000000; + + /* Wait for last operation to be completed */ + status = FLASHRAM_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + + /* If the erase operation is completed, disable the ERASE and DATA bits */ + CLEAR_BIT(FLASH->PECR, FLASH_PECR_ERASE); + CLEAR_BIT(FLASH->PECR, FLASH_PECR_DATA); + } + + CLEAR_BIT(SCnSCB->ACTLR, SCnSCB_ACTLR_DISMCYCINT_Msk); + + /* Return the erase status */ + return status; +} + +/** + * @brief Write a double word in data memory without erase. + * @param Address: specifies the address to be written. + * @param Data: specifies the data to be written. + * @note To correctly run this function, the HAL_FLASH_EEPROM_Unlock() function + * must be called before. + * Call the HAL_FLASH_EEPROM_Lock() to he data EEPROM access + * and Flash program erase control register access(recommended to protect + * the DATA_EEPROM against possible unwanted operation). + * @note Data memory double word write is possible only from SRAM. + * @note A data memory double word is written to the data memory only if the + * first address to load is the start address of a double word (multiple + * of double word). + * @note During the Data memory double word write, all read operations are + * forbidden (this includes DMA read operations and debugger read + * operations such as breakpoints, periodic updates, etc.). + * @retval HAL status + */ +__RAM_FUNC HAL_FLASHEx_DATAEEPROM_ProgramDoubleWord(uint32_t Address, uint64_t Data) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Set the DISMCYCINT[0] bit in the Auxillary Control Register (0xE000E008) + This bit prevents the interruption of multicycle instructions and therefore + will increase the interrupt latency. of Cortex-M3. */ + SET_BIT(SCnSCB->ACTLR, SCnSCB_ACTLR_DISMCYCINT_Msk); + + /* Wait for last operation to be completed */ + status = FLASHRAM_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + + if(status == HAL_OK) + { + /* If the previous operation is completed, proceed to program the new data*/ + SET_BIT(FLASH->PECR, FLASH_PECR_FPRG); + SET_BIT(FLASH->PECR, FLASH_PECR_DATA); + + /* Write the 2 words */ + *(__IO uint32_t *)Address = (uint32_t) Data; + Address += 4; + *(__IO uint32_t *)Address = (uint32_t) (Data >> 32); + + /* Wait for last operation to be completed */ + status = FLASHRAM_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + + /* If the write operation is completed, disable the FPRG and DATA bits */ + CLEAR_BIT(FLASH->PECR, FLASH_PECR_FPRG); + CLEAR_BIT(FLASH->PECR, FLASH_PECR_DATA); + } + + CLEAR_BIT(SCnSCB->ACTLR, SCnSCB_ACTLR_DISMCYCINT_Msk); + + /* Return the Write Status */ + return status; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup FLASH_RAMFUNC_Private_Functions + * @{ + */ + +/** + * @brief Set the specific FLASH error flag. + * @retval HAL Status + */ +static __RAM_FUNC FLASHRAM_SetErrorCode(void) +{ + uint32_t flags = 0; + + if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_WRPERR)) + { + pFlash.ErrorCode |= HAL_FLASH_ERROR_WRP; + flags |= FLASH_FLAG_WRPERR; + } + if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_PGAERR)) + { + pFlash.ErrorCode |= HAL_FLASH_ERROR_PGA; + flags |= FLASH_FLAG_PGAERR; + } + if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_OPTVERR)) + { + pFlash.ErrorCode |= HAL_FLASH_ERROR_OPTV; + flags |= FLASH_FLAG_OPTVERR; + } + +#if defined(FLASH_SR_RDERR) + if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_RDERR)) + { + pFlash.ErrorCode |= HAL_FLASH_ERROR_RD; + flags |= FLASH_FLAG_RDERR; + } +#endif /* FLASH_SR_RDERR */ +#if defined(FLASH_SR_OPTVERRUSR) + if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_OPTVERRUSR)) + { + pFlash.ErrorCode |= HAL_FLASH_ERROR_OPTVUSR; + flags |= FLASH_FLAG_OPTVERRUSR; + } +#endif /* FLASH_SR_OPTVERRUSR */ + + /* Clear FLASH error pending bits */ + __HAL_FLASH_CLEAR_FLAG(flags); + + return HAL_OK; +} + +/** + * @brief Wait for a FLASH operation to complete. + * @param Timeout: maximum flash operationtimeout + * @retval HAL status + */ +static __RAM_FUNC FLASHRAM_WaitForLastOperation(uint32_t Timeout) +{ + /* Wait for the FLASH operation to complete by polling on BUSY flag to be reset. + Even if the FLASH operation fails, the BUSY flag will be reset and an error + flag will be set */ + + while(__HAL_FLASH_GET_FLAG(FLASH_FLAG_BSY) && (Timeout != 0x00)) + { + Timeout--; + } + + if(Timeout == 0x00 ) + { + return HAL_TIMEOUT; + } + + /* Check FLASH End of Operation flag */ + if (__HAL_FLASH_GET_FLAG(FLASH_FLAG_EOP)) + { + /* Clear FLASH End of Operation pending bit */ + __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP); + } + + if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_WRPERR) || + __HAL_FLASH_GET_FLAG(FLASH_FLAG_OPTVERR) || +#if defined(FLASH_SR_RDERR) + __HAL_FLASH_GET_FLAG(FLASH_FLAG_RDERR) || +#endif /* FLASH_SR_RDERR */ +#if defined(FLASH_SR_OPTVERRUSR) + __HAL_FLASH_GET_FLAG(FLASH_FLAG_OPTVERRUSR) || +#endif /* FLASH_SR_OPTVERRUSR */ + __HAL_FLASH_GET_FLAG(FLASH_FLAG_PGAERR)) + { + /*Save the error code*/ + FLASHRAM_SetErrorCode(); + return HAL_ERROR; + } + + /* There is no error flag set */ + return HAL_OK; +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_FLASH_MODULE_ENABLED */ +/** + * @} + */ + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_gpio.c b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_gpio.c new file mode 100755 index 0000000..f91c788 --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_gpio.c @@ -0,0 +1,562 @@ +/** + ****************************************************************************** + * @file stm32l1xx_hal_gpio.c + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief GPIO HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the General Purpose Input/Output (GPIO) peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + @verbatim + ============================================================================== + ##### GPIO Peripheral features ##### + ============================================================================== + [..] + Each port bit of the general-purpose I/O (GPIO) ports can be individually + configured by software in several modes: + (+) Input mode + (+) Analog mode + (+) Output mode + (+) Alternate function mode + (+) External interrupt/event lines + + [..] + During and just after reset, the alternate functions and external interrupt + lines are not active and the I/O ports are configured in input floating mode. + + [..] + All GPIO pins have weak internal pull-up and pull-down resistors, which can be + activated or not. + + [..] + In Output or Alternate mode, each IO can be configured on open-drain or push-pull + type and the IO speed can be selected depending on the VDD value. + + [..] + The microcontroller IO pins are connected to onboard peripherals/modules through a + multiplexer that allows only one peripheral s alternate function (AF) connected + to an IO pin at a time. In this way, there can be no conflict between peripherals + sharing the same IO pin. + + [..] + All ports have external interrupt/event capability. To use external interrupt + lines, the port must be configured in input mode. All available GPIO pins are + connected to the 16 external interrupt/event lines from EXTI0 to EXTI15. + + [..] + The external interrupt/event controller consists of up to 28 edge detectors + (depending on products 16 lines are connected to GPIO) for generating event/interrupt + requests (each input line can be independently configured to select the type + (interrupt or event) and the corresponding trigger event (rising or falling or both). + Each line can also be masked independently. + + ##### How to use this driver ##### + ============================================================================== + [..] + (#) Enable the GPIO AHB clock using the following function : __GPIOx_CLK_ENABLE(). + + (#) Configure the GPIO pin(s) using HAL_GPIO_Init(). + (++) Configure the IO mode using "Mode" member from GPIO_InitTypeDef structure + (++) Activate Pull-up, Pull-down resistor using "Pull" member from GPIO_InitTypeDef + structure. + (++) In case of Output or alternate function mode selection: the speed is + configured through "Speed" member from GPIO_InitTypeDef structure, + the speed is configurable: Low, Medium and High. + (++) If alternate mode is selected, the alternate function connected to the IO + is configured through "Alternate" member from GPIO_InitTypeDef structure + (++) Analog mode is required when a pin is to be used as ADC channel + or DAC output. + (++) In case of external interrupt/event selection the "Mode" member from + GPIO_InitTypeDef structure select the type (interrupt or event) and + the corresponding trigger event (rising or falling or both). + + (#) In case of external interrupt/event mode selection, configure NVIC IRQ priority + mapped to the EXTI line using HAL_NVIC_SetPriority() and enable it using + HAL_NVIC_EnableIRQ(). + + (#) HAL_GPIO_DeInit allows to set register values to their reset value. It's also + recommended to use it to unconfigure pin which was used as an external interrupt + or in event mode. That's the only way to reset corresponding bit in EXTI & SYSCFG + registers. + + (#) To get the level of a pin configured in input mode use HAL_GPIO_ReadPin(). + + (#) To set/reset the level of a pin configured in output mode use + HAL_GPIO_WritePin()/HAL_GPIO_TogglePin(). + + (#) To lock pin configuration until next reset use HAL_GPIO_LockPin(). + + (#) During and just after reset, the alternate functions are not + active and the GPIO pins are configured in input floating mode (except JTAG + pins). + + (#) The LSE oscillator pins OSC32_IN and OSC32_OUT can be used as general purpose + (PC14 and PC15, respectively) when the LSE oscillator is off. The LSE has + priority over the GPIO function. + + (#) The HSE oscillator pins OSC_IN/OSC_OUT can be used as + general purpose PH0 and PH1, respectively, when the HSE oscillator is off. + The HSE has priority over the GPIO function. + + @endverbatim + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_hal.h" + +/** @addtogroup STM32L1xx_HAL_Driver + * @{ + */ + +/** @addtogroup GPIO + * @brief GPIO HAL module driver + * @{ + */ + +#ifdef HAL_GPIO_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @addtogroup GPIO_Private_Constants + * @{ + */ +#define GPIO_MODE ((uint32_t)0x00000003) +#define EXTI_MODE ((uint32_t)0x10000000) +#define GPIO_MODE_IT ((uint32_t)0x00010000) +#define GPIO_MODE_EVT ((uint32_t)0x00020000) +#define RISING_EDGE ((uint32_t)0x00100000) +#define FALLING_EDGE ((uint32_t)0x00200000) +#define GPIO_OUTPUT_TYPE ((uint32_t)0x00000010) + +#define GPIO_NUMBER ((uint32_t)16) + +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions ---------------------------------------------------------*/ + +/** @addtogroup GPIO_Exported_Functions + * @{ + */ + +/** @addtogroup GPIO_Exported_Functions_Group1 + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and Configuration functions ##### + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the GPIOx peripheral according to the specified parameters in the GPIO_Init. + * @param GPIOx: where x can be (A..G depending on device used) to select the GPIO peripheral for STM32L1XX family devices + * @param GPIO_Init: pointer to a GPIO_InitTypeDef structure that contains + * the configuration information for the specified GPIO peripheral. + * @retval None + */ +void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init) +{ + uint32_t position = 0x00; + uint32_t iocurrent = 0x00; + uint32_t temp = 0x00; + + /* Check the parameters */ + assert_param(IS_GPIO_ALL_INSTANCE(GPIOx)); + assert_param(IS_GPIO_PIN(GPIO_Init->Pin)); + assert_param(IS_GPIO_MODE(GPIO_Init->Mode)); + assert_param(IS_GPIO_PULL(GPIO_Init->Pull)); + + /* Configure the port pins */ + while (((GPIO_Init->Pin) >> position) != 0) + { + /* Get current io position */ + iocurrent = (GPIO_Init->Pin) & ((uint32_t)1 << position); + + if(iocurrent) + { + /*--------------------- GPIO Mode Configuration ------------------------*/ + /* In case of Alternate function mode selection */ + if((GPIO_Init->Mode == GPIO_MODE_AF_PP) || (GPIO_Init->Mode == GPIO_MODE_AF_OD)) + { + /* Check the Alternate function parameters */ + assert_param(IS_GPIO_AF_INSTANCE(GPIOx)); + assert_param(IS_GPIO_AF(GPIO_Init->Alternate)); + + /* Configure Alternate function mapped with the current IO */ + /* Identify AFRL or AFRH register based on IO position*/ + temp = GPIOx->AFR[position >> 3]; + CLEAR_BIT(temp, (uint32_t)0xF << ((uint32_t)(position & (uint32_t)0x07) * 4)) ; + SET_BIT(temp, (uint32_t)(GPIO_Init->Alternate) << (((uint32_t)position & (uint32_t)0x07) * 4)); + GPIOx->AFR[position >> 3] = temp; + } + + /* Configure IO Direction mode (Input, Output, Alternate or Analog) */ + temp = GPIOx->MODER; + CLEAR_BIT(temp, GPIO_MODER_MODER0 << (position * 2)); + SET_BIT(temp, (GPIO_Init->Mode & GPIO_MODE) << (position * 2)); + GPIOx->MODER = temp; + + /* In case of Output or Alternate function mode selection */ + if ((GPIO_Init->Mode == GPIO_MODE_OUTPUT_PP) || (GPIO_Init->Mode == GPIO_MODE_AF_PP) || + (GPIO_Init->Mode == GPIO_MODE_OUTPUT_OD) || (GPIO_Init->Mode == GPIO_MODE_AF_OD)) + { + /* Check the Speed parameter */ + assert_param(IS_GPIO_SPEED(GPIO_Init->Speed)); + /* Configure the IO Speed */ + temp = GPIOx->OSPEEDR; + CLEAR_BIT(temp, GPIO_OSPEEDER_OSPEEDR0 << (position * 2)); + SET_BIT(temp, GPIO_Init->Speed << (position * 2)); + GPIOx->OSPEEDR = temp; + + /* Configure the IO Output Type */ + temp = GPIOx->OTYPER; + CLEAR_BIT(temp, GPIO_OTYPER_OT_0 << position) ; + SET_BIT(temp, ((GPIO_Init->Mode & GPIO_OUTPUT_TYPE) >> 4) << position); + GPIOx->OTYPER = temp; + } + + /* Activate the Pull-up or Pull down resistor for the current IO */ + temp = GPIOx->PUPDR; + CLEAR_BIT(temp, GPIO_PUPDR_PUPDR0 << (position * 2)); + SET_BIT(temp, (GPIO_Init->Pull) << (position * 2)); + GPIOx->PUPDR = temp; + + /*--------------------- EXTI Mode Configuration ------------------------*/ + /* Configure the External Interrupt or event for the current IO */ + if((GPIO_Init->Mode & EXTI_MODE) == EXTI_MODE) + { + /* Enable SYSCFG Clock */ + __HAL_RCC_SYSCFG_CLK_ENABLE(); + + temp = SYSCFG->EXTICR[position >> 2]; + CLEAR_BIT(temp, ((uint32_t)0x0F) << (4 * (position & 0x03))); + SET_BIT(temp, (GPIO_GET_INDEX(GPIOx)) << (4 * (position & 0x03))); + SYSCFG->EXTICR[position >> 2] = temp; + + /* Clear EXTI line configuration */ + temp = EXTI->IMR; + CLEAR_BIT(temp, (uint32_t)iocurrent); + if((GPIO_Init->Mode & GPIO_MODE_IT) == GPIO_MODE_IT) + { + SET_BIT(temp, iocurrent); + } + EXTI->IMR = temp; + + temp = EXTI->EMR; + CLEAR_BIT(temp, (uint32_t)iocurrent); + if((GPIO_Init->Mode & GPIO_MODE_EVT) == GPIO_MODE_EVT) + { + SET_BIT(temp, iocurrent); + } + EXTI->EMR = temp; + + /* Clear Rising Falling edge configuration */ + temp = EXTI->RTSR; + CLEAR_BIT(temp, (uint32_t)iocurrent); + if((GPIO_Init->Mode & RISING_EDGE) == RISING_EDGE) + { + SET_BIT(temp, iocurrent); + } + EXTI->RTSR = temp; + + temp = EXTI->FTSR; + CLEAR_BIT(temp, (uint32_t)iocurrent); + if((GPIO_Init->Mode & FALLING_EDGE) == FALLING_EDGE) + { + SET_BIT(temp, iocurrent); + } + EXTI->FTSR = temp; + } + } + + position++; + } +} + +/** + * @brief De-initializes the GPIOx peripheral registers to their default reset values. + * @param GPIOx: where x can be (A..G depending on device used) to select the GPIO peripheral for STM32L1XX family devices + * @param GPIO_Pin: specifies the port bit to be written. + * This parameter can be one of GPIO_PIN_x where x can be (0..15). + * @retval None + */ +void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin) +{ + uint32_t position = 0x00; + uint32_t iocurrent = 0x00; + uint32_t tmp = 0x00; + + /* Check the parameters */ + assert_param(IS_GPIO_ALL_INSTANCE(GPIOx)); + assert_param(IS_GPIO_PIN(GPIO_Pin)); + + /* Configure the port pins */ + while ((GPIO_Pin >> position) != 0) + { + /* Get current io position */ + iocurrent = (GPIO_Pin) & ((uint32_t)1 << position); + + if (iocurrent) + { + /*------------------------- GPIO Mode Configuration --------------------*/ + /* Configure IO Direction in Input Floting Mode */ + CLEAR_BIT(GPIOx->MODER, GPIO_MODER_MODER0 << (position * 2)); + + /* Configure the default Alternate Function in current IO */ + CLEAR_BIT(GPIOx->AFR[position >> 3], (uint32_t)0xF << ((uint32_t)(position & (uint32_t)0x07) * 4)) ; + + /* Configure the default value for IO Speed */ + CLEAR_BIT(GPIOx->OSPEEDR, GPIO_OSPEEDER_OSPEEDR0 << (position * 2)); + + /* Configure the default value IO Output Type */ + CLEAR_BIT(GPIOx->OTYPER, GPIO_OTYPER_OT_0 << position) ; + + /* Deactivate the Pull-up oand Pull-down resistor for the current IO */ + CLEAR_BIT(GPIOx->PUPDR, GPIO_PUPDR_PUPDR0 << (position * 2)); + + /*------------------------- EXTI Mode Configuration --------------------*/ + /* Clear the External Interrupt or Event for the current IO */ + + tmp = SYSCFG->EXTICR[position >> 2]; + tmp &= (((uint32_t)0x0F) << (4 * (position & 0x03))); + if(tmp == (GPIO_GET_INDEX(GPIOx) << (4 * (position & 0x03)))) + { + tmp = ((uint32_t)0x0F) << (4 * (position & 0x03)); + CLEAR_BIT(SYSCFG->EXTICR[position >> 2], tmp); + + /* Clear EXTI line configuration */ + CLEAR_BIT(EXTI->IMR, (uint32_t)iocurrent); + CLEAR_BIT(EXTI->EMR, (uint32_t)iocurrent); + + /* Clear Rising Falling edge configuration */ + CLEAR_BIT(EXTI->RTSR, (uint32_t)iocurrent); + CLEAR_BIT(EXTI->FTSR, (uint32_t)iocurrent); + } + } + + position++; + } +} + +/** + * @} + */ + +/** @addtogroup GPIO_Exported_Functions_Group2 + * @brief GPIO Read, Write, Toggle, Lock and EXTI management functions. + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Reads the specified input port pin. + * @param GPIOx: where x can be (A..G depending on device used) to select the GPIO peripheral for STM32L1XX family devices + * @param GPIO_Pin: specifies the port bit to read. + * This parameter can be GPIO_PIN_x where x can be (0..15). + * @retval The input port pin value. + */ +GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin) +{ + GPIO_PinState bitstatus; + + /* Check the parameters */ + assert_param(IS_GPIO_PIN(GPIO_Pin)); + + if ((GPIOx->IDR & GPIO_Pin) != (uint32_t)GPIO_PIN_RESET) + { + bitstatus = GPIO_PIN_SET; + } + else + { + bitstatus = GPIO_PIN_RESET; + } + return bitstatus; +} + +/** + * @brief Sets or clears the selected data port bit. + * @note This function uses GPIOx_BSRR register to allow atomic read/modify + * accesses. In this way, there is no risk of an IRQ occurring between + * the read and the modify access. + * @param GPIOx: where x can be (A..G depending on device used) to select the GPIO peripheral for STM32L1XX family devices + * @param GPIO_Pin: specifies the port bit to be written. + * This parameter can be one of GPIO_PIN_x where x can be (0..15). + * @param PinState: specifies the value to be written to the selected bit. + * This parameter can be one of the GPIO_PinState enum values: + * @arg GPIO_PIN_RESET: to clear the port pin + * @arg GPIO_PIN_SET: to set the port pin + * @retval None + */ +void HAL_GPIO_WritePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState) +{ + /* Check the parameters */ + assert_param(IS_GPIO_PIN(GPIO_Pin)); + assert_param(IS_GPIO_PIN_ACTION(PinState)); + + if (PinState != GPIO_PIN_RESET) + { + GPIOx->BSRR = (uint32_t)GPIO_Pin; + } + else + { + GPIOx->BSRR = (uint32_t)GPIO_Pin << 16 ; + } +} + +/** + * @brief Toggles the specified GPIO pin + * @param GPIOx: where x can be (A..G depending on device used) to select the GPIO peripheral for STM32L1XX family devices + * @param GPIO_Pin: specifies the pins to be toggled. + * @retval None + */ +void HAL_GPIO_TogglePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin) +{ + /* Check the parameters */ + assert_param(IS_GPIO_PIN(GPIO_Pin)); + + GPIOx->ODR ^= GPIO_Pin; +} + +/** +* @brief Locks GPIO Pins configuration registers. +* @note The locked registers are GPIOx_MODER, GPIOx_OTYPER, GPIOx_OSPEEDR, +* GPIOx_PUPDR, GPIOx_AFRL and GPIOx_AFRH. +* @note The configuration of the locked GPIO pins can no longer be modified +* until the next reset. +* @note Limitation concerning GPIOx_OTYPER: Locking of GPIOx_OTYPER[i] with i = 15..8 +* depends from setting of GPIOx_LCKR[i-8] and not from GPIOx_LCKR[i]. +* GPIOx_LCKR[i-8] is locking GPIOx_OTYPER[i] together with GPIOx_OTYPER[i-8]. +* It is not possible to lock GPIOx_OTYPER[i] with i = 15..8, without locking also +* GPIOx_OTYPER[i-8]. +* Workaround: When calling HAL_GPIO_LockPin with GPIO_Pin from GPIO_PIN_8 to GPIO_PIN_15, +* you must call also HAL_GPIO_LockPin with GPIO_Pin - 8. +* (When locking a pin from GPIO_PIN_8 to GPIO_PIN_15, you must lock also the corresponding +* GPIO_PIN_0 to GPIO_PIN_7). +* @param GPIOx: where x can be (A..G depending on device used) to select the GPIO peripheral for STM32L1XX family devices +* @param GPIO_Pin: Specifies the port bit to be locked. +* This parameter can be any combination of GPIO_Pin_x where x can be (0..15). +* @retval None +*/ +HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin) +{ + __IO uint32_t tmp = GPIO_LCKR_LCKK; + + /* Check the parameters */ + assert_param(IS_GPIO_LOCK_INSTANCE(GPIOx)); + assert_param(IS_GPIO_PIN(GPIO_Pin)); + + /* Apply lock key write sequence */ + SET_BIT(tmp, GPIO_Pin); + /* Set LCKx bit(s): LCKK='1' + LCK[15-0] */ + GPIOx->LCKR = tmp; + /* Reset LCKx bit(s): LCKK='0' + LCK[15-0] */ + GPIOx->LCKR = GPIO_Pin; + /* Set LCKx bit(s): LCKK='1' + LCK[15-0] */ + GPIOx->LCKR = tmp; + /* Read LCKK bit*/ + tmp = GPIOx->LCKR; + + if((GPIOx->LCKR & GPIO_LCKR_LCKK) != RESET) + { + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief This function handles EXTI interrupt request. + * @param GPIO_Pin: Specifies the port pin connected to corresponding EXTI line. + * @retval None + */ +void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin) +{ + /* EXTI line interrupt detected */ + if(__HAL_GPIO_EXTI_GET_IT(GPIO_Pin) != RESET) + { + __HAL_GPIO_EXTI_CLEAR_IT(GPIO_Pin); + HAL_GPIO_EXTI_Callback(GPIO_Pin); + } +} + +/** + * @brief EXTI line detection callbacks. + * @param GPIO_Pin: Specifies the port pin connected to corresponding EXTI line. + * @retval None + */ +__weak void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(GPIO_Pin); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_GPIO_EXTI_Callback could be implemented in the user file + */ +} + +/** + * @} + */ + + +/** + * @} + */ + +#endif /* HAL_GPIO_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_i2c.c b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_i2c.c new file mode 100755 index 0000000..bb2f9ff --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_i2c.c @@ -0,0 +1,5343 @@ +/** + ****************************************************************************** + * @file stm32l1xx_hal_i2c.c + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief I2C HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Inter Integrated Circuit (I2C) peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral State, Mode and Error functions + * + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The I2C HAL driver can be used as follows: + + (#) Declare a I2C_HandleTypeDef handle structure, for example: + I2C_HandleTypeDef hi2c; + + (#)Initialize the I2C low level resources by implementing the HAL_I2C_MspInit() API: + (##) Enable the I2Cx interface clock + (##) I2C pins configuration + (+++) Enable the clock for the I2C GPIOs + (+++) Configure I2C pins as alternate function open-drain + (##) NVIC configuration if you need to use interrupt process + (+++) Configure the I2Cx interrupt priority + (+++) Enable the NVIC I2C IRQ Channel + (##) DMA Configuration if you need to use DMA process + (+++) Declare a DMA_HandleTypeDef handle structure for the transmit or receive channel + (+++) Enable the DMAx interface clock using + (+++) Configure the DMA handle parameters + (+++) Configure the DMA Tx or Rx channel + (+++) Associate the initialized DMA handle to the hi2c DMA Tx or Rx handle + (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on + the DMA Tx or Rx channel + + (#) Configure the Communication Speed, Duty cycle, Addressing mode, Own Address1, + Dual Addressing mode, Own Address2, General call and Nostretch mode in the hi2c Init structure. + + (#) Initialize the I2C registers by calling the HAL_I2C_Init(), configures also the low level Hardware + (GPIO, CLOCK, NVIC...etc) by calling the customized HAL_I2C_MspInit(&hi2c) API. + + (#) To check if target device is ready for communication, use the function HAL_I2C_IsDeviceReady() + + (#) For I2C IO and IO MEM operations, three operation modes are available within this driver : + + *** Polling mode IO operation *** + ================================= + [..] + (+) Transmit in master mode an amount of data in blocking mode using HAL_I2C_Master_Transmit() + (+) Receive in master mode an amount of data in blocking mode using HAL_I2C_Master_Receive() + (+) Transmit in slave mode an amount of data in blocking mode using HAL_I2C_Slave_Transmit() + (+) Receive in slave mode an amount of data in blocking mode using HAL_I2C_Slave_Receive() + + *** Polling mode IO MEM operation *** + ===================================== + [..] + (+) Write an amount of data in blocking mode to a specific memory address using HAL_I2C_Mem_Write() + (+) Read an amount of data in blocking mode from a specific memory address using HAL_I2C_Mem_Read() + + + *** Interrupt mode IO operation *** + =================================== + [..] + (+) Transmit in master mode an amount of data in non-blocking mode using HAL_I2C_Master_Transmit_IT() + (+) At transmission end of transfer, HAL_I2C_MasterTxCpltCallback() is executed and user can + add his own code by customization of function pointer HAL_I2C_MasterTxCpltCallback() + (+) Receive in master mode an amount of data in non-blocking mode using HAL_I2C_Master_Receive_IT() + (+) At reception end of transfer, HAL_I2C_MasterRxCpltCallback() is executed and user can + add his own code by customization of function pointer HAL_I2C_MasterRxCpltCallback() + (+) Transmit in slave mode an amount of data in non-blocking mode using HAL_I2C_Slave_Transmit_IT() + (+) At transmission end of transfer, HAL_I2C_SlaveTxCpltCallback() is executed and user can + add his own code by customization of function pointer HAL_I2C_SlaveTxCpltCallback() + (+) Receive in slave mode an amount of data in non-blocking mode using HAL_I2C_Slave_Receive_IT() + (+) At reception end of transfer, HAL_I2C_SlaveRxCpltCallback() is executed and user can + add his own code by customization of function pointer HAL_I2C_SlaveRxCpltCallback() + (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and user can + add his own code by customization of function pointer HAL_I2C_ErrorCallback() + (+) Abort a master I2C process communication with Interrupt using HAL_I2C_Master_Abort_IT() + (+) End of abort process, HAL_I2C_AbortCpltCallback() is executed and user can + add his own code by customization of function pointer HAL_I2C_AbortCpltCallback() + (+) Discard a slave I2C process communication using __HAL_I2C_GENERATE_NACK() macro. + This action will inform Master to generate a Stop condition to discard the communication. + + + *** Interrupt mode IO sequential operation *** + ============================================== + [..] + (@) These interfaces allow to manage a sequential transfer with a repeated start condition + when a direction change during transfer + [..] + (+) A specific option field manage the different steps of a sequential transfer + (+) Option field values are defined through @ref I2C_XFEROPTIONS and are listed below: + (++) I2C_FIRST_AND_LAST_FRAME: No sequential usage, functionnal is same as associated interfaces in no sequential mode + (++) I2C_FIRST_FRAME: Sequential usage, this option allow to manage a sequence with start condition, address + and data to transfer without a final stop condition + (++) I2C_NEXT_FRAME: Sequential usage, this option allow to manage a sequence with a restart condition, address + and with new data to transfer if the direction change or manage only the new data to transfer + if no direction change and without a final stop condition in both cases + (++) I2C_LAST_FRAME: Sequential usage, this option allow to manage a sequance with a restart condition, address + and with new data to transfer if the direction change or manage only the new data to transfer + if no direction change and with a final stop condition in both cases + + (+) Differents sequential I2C interfaces are listed below: + (++) Sequential transmit in master I2C mode an amount of data in non-blocking mode using HAL_I2C_Master_Sequential_Transmit_IT() + (+++) At transmission end of current frame transfer, HAL_I2C_MasterTxCpltCallback() is executed and user can + add his own code by customization of function pointer HAL_I2C_MasterTxCpltCallback() + (++) Sequential receive in master I2C mode an amount of data in non-blocking mode using HAL_I2C_Master_Sequential_Receive_IT() + (+++) At reception end of current frame transfer, HAL_I2C_MasterRxCpltCallback() is executed and user can + add his own code by customization of function pointer HAL_I2C_MasterRxCpltCallback() + (++) Abort a master I2C process communication with Interrupt using HAL_I2C_Master_Abort_IT() + (+++) End of abort process, HAL_I2C_AbortCpltCallback() is executed and user can + add his own code by customization of function pointer HAL_I2C_AbortCpltCallback() + (++) Enable/disable the Address listen mode in slave I2C mode using HAL_I2C_EnableListen_IT() HAL_I2C_DisableListen_IT() + (+++) When address slave I2C match, HAL_I2C_AddrCallback() is executed and user can + add his own code to check the Address Match Code and the transmission direction request by master (Write/Read). + (+++) At Listen mode end HAL_I2C_ListenCpltCallback() is executed and user can + add his own code by customization of function pointer HAL_I2C_ListenCpltCallback() + (++) Sequential transmit in slave I2C mode an amount of data in non-blocking mode using HAL_I2C_Slave_Sequential_Transmit_IT() + (+++) At transmission end of current frame transfer, HAL_I2C_SlaveTxCpltCallback() is executed and user can + add his own code by customization of function pointer HAL_I2C_SlaveTxCpltCallback() + (++) Sequential receive in slave I2C mode an amount of data in non-blocking mode using HAL_I2C_Slave_Sequential_Receive_IT() + (+++) At reception end of current frame transfer, HAL_I2C_SlaveRxCpltCallback() is executed and user can + add his own code by customization of function pointer HAL_I2C_SlaveRxCpltCallback() + (++) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and user can + add his own code by customization of function pointer HAL_I2C_ErrorCallback() + (++) Abort a master I2C process communication with Interrupt using HAL_I2C_Master_Abort_IT() + (++) End of abort process, HAL_I2C_AbortCpltCallback() is executed and user can + add his own code by customization of function pointer HAL_I2C_AbortCpltCallback() + (++) Discard a slave I2C process communication using __HAL_I2C_GENERATE_NACK() macro. + This action will inform Master to generate a Stop condition to discard the communication. + + *** Interrupt mode IO MEM operation *** + ======================================= + [..] + (+) Write an amount of data in non-blocking mode with Interrupt to a specific memory address using + HAL_I2C_Mem_Write_IT() + (+) At Memory end of write transfer, HAL_I2C_MemTxCpltCallback() is executed and user can + add his own code by customization of function pointer HAL_I2C_MemTxCpltCallback() + (+) Read an amount of data in non-blocking mode with Interrupt from a specific memory address using + HAL_I2C_Mem_Read_IT() + (+) At Memory end of read transfer, HAL_I2C_MemRxCpltCallback() is executed and user can + add his own code by customization of function pointer HAL_I2C_MemRxCpltCallback() + (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and user can + add his own code by customization of function pointer HAL_I2C_ErrorCallback() + + *** DMA mode IO operation *** + ============================== + [..] + (+) Transmit in master mode an amount of data in non-blocking mode (DMA) using + HAL_I2C_Master_Transmit_DMA() + (+) At transmission end of transfer, HAL_I2C_MasterTxCpltCallback() is executed and user can + add his own code by customization of function pointer HAL_I2C_MasterTxCpltCallback() + (+) Receive in master mode an amount of data in non-blocking mode (DMA) using + HAL_I2C_Master_Receive_DMA() + (+) At reception end of transfer, HAL_I2C_MasterRxCpltCallback() is executed and user can + add his own code by customization of function pointer HAL_I2C_MasterRxCpltCallback() + (+) Transmit in slave mode an amount of data in non-blocking mode (DMA) using + HAL_I2C_Slave_Transmit_DMA() + (+) At transmission end of transfer, HAL_I2C_SlaveTxCpltCallback() is executed and user can + add his own code by customization of function pointer HAL_I2C_SlaveTxCpltCallback() + (+) Receive in slave mode an amount of data in non-blocking mode (DMA) using + HAL_I2C_Slave_Receive_DMA() + (+) At reception end of transfer, HAL_I2C_SlaveRxCpltCallback() is executed and user can + add his own code by customization of function pointer HAL_I2C_SlaveRxCpltCallback() + (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and user can + add his own code by customization of function pointer HAL_I2C_ErrorCallback() + (+) Abort a master I2C process communication with Interrupt using HAL_I2C_Master_Abort_IT() + (+) End of abort process, HAL_I2C_AbortCpltCallback() is executed and user can + add his own code by customization of function pointer HAL_I2C_AbortCpltCallback() + (+) Discard a slave I2C process communication using __HAL_I2C_GENERATE_NACK() macro. + This action will inform Master to generate a Stop condition to discard the communication. + + *** DMA mode IO MEM operation *** + ================================= + [..] + (+) Write an amount of data in non-blocking mode with DMA to a specific memory address using + HAL_I2C_Mem_Write_DMA() + (+) At Memory end of write transfer, HAL_I2C_MemTxCpltCallback() is executed and user can + add his own code by customization of function pointer HAL_I2C_MemTxCpltCallback() + (+) Read an amount of data in non-blocking mode with DMA from a specific memory address using + HAL_I2C_Mem_Read_DMA() + (+) At Memory end of read transfer, HAL_I2C_MemRxCpltCallback() is executed and user can + add his own code by customization of function pointer HAL_I2C_MemRxCpltCallback() + (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and user can + add his own code by customization of function pointer HAL_I2C_ErrorCallback() + + + *** I2C HAL driver macros list *** + ================================== + [..] + Below the list of most used macros in I2C HAL driver. + + (+) __HAL_I2C_ENABLE: Enable the I2C peripheral + (+) __HAL_I2C_DISABLE: Disable the I2C peripheral + (+) __HAL_I2C_GENERATE_NACK: Generate a Non-Acknowledge I2C peripheral in Slave mode + (+) __HAL_I2C_GET_FLAG: Check whether the specified I2C flag is set or not + (+) __HAL_I2C_CLEAR_FLAG: Clear the specified I2C pending flag + (+) __HAL_I2C_ENABLE_IT: Enable the specified I2C interrupt + (+) __HAL_I2C_DISABLE_IT: Disable the specified I2C interrupt + + [..] + (@) You can refer to the I2C HAL driver header file for more useful macros + + + @endverbatim + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_hal.h" + +/** @addtogroup STM32L1xx_HAL_Driver + * @{ + */ + +/** @defgroup I2C I2C + * @brief I2C HAL module driver + * @{ + */ + +#ifdef HAL_I2C_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup I2C_Private_Define I2C Private Define + * @{ + */ +#define I2C_TIMEOUT_FLAG ((uint32_t)35U) /*!< Timeout 35 ms */ +#define I2C_TIMEOUT_ADDR_SLAVE ((uint32_t)10000U) /*!< Timeout 10 s */ +#define I2C_TIMEOUT_BUSY_FLAG ((uint32_t)25U) /*!< Timeout 25 ms */ +#define I2C_NO_OPTION_FRAME ((uint32_t)0xFFFF0000U) /*!< XferOptions default value */ + +#define I2C_MIN_PCLK_FREQ ((uint32_t)2000000U) /*!< 2 MHz */ + +/* Private define for @ref PreviousState usage */ +#define I2C_STATE_MSK ((uint32_t)((HAL_I2C_STATE_BUSY_TX | HAL_I2C_STATE_BUSY_RX) & (~(uint32_t)HAL_I2C_STATE_READY))) /*!< Mask State define, keep only RX and TX bits */ +#define I2C_STATE_NONE ((uint32_t)(HAL_I2C_MODE_NONE)) /*!< Default Value */ +#define I2C_STATE_MASTER_BUSY_TX ((uint32_t)((HAL_I2C_STATE_BUSY_TX & I2C_STATE_MSK) | HAL_I2C_MODE_MASTER)) /*!< Master Busy TX, combinaison of State LSB and Mode enum */ +#define I2C_STATE_MASTER_BUSY_RX ((uint32_t)((HAL_I2C_STATE_BUSY_RX & I2C_STATE_MSK) | HAL_I2C_MODE_MASTER)) /*!< Master Busy RX, combinaison of State LSB and Mode enum */ +#define I2C_STATE_SLAVE_BUSY_TX ((uint32_t)((HAL_I2C_STATE_BUSY_TX & I2C_STATE_MSK) | HAL_I2C_MODE_SLAVE)) /*!< Slave Busy TX, combinaison of State LSB and Mode enum */ +#define I2C_STATE_SLAVE_BUSY_RX ((uint32_t)((HAL_I2C_STATE_BUSY_RX & I2C_STATE_MSK) | HAL_I2C_MODE_SLAVE)) /*!< Slave Busy RX, combinaison of State LSB and Mode enum */ + +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup I2C_Private_Functions I2C Private Functions + * @{ + */ +/* Private functions to handle DMA transfer */ +static void I2C_DMAXferCplt(DMA_HandleTypeDef *hdma); +static void I2C_DMAError(DMA_HandleTypeDef *hdma); +static void I2C_DMAAbort(DMA_HandleTypeDef *hdma); + +static void I2C_ITError(I2C_HandleTypeDef *hi2c); + +static HAL_StatusTypeDef I2C_MasterRequestWrite(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Timeout, uint32_t Tickstart); +static HAL_StatusTypeDef I2C_MasterRequestRead(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Timeout, uint32_t Tickstart); +static HAL_StatusTypeDef I2C_RequestMemoryWrite(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, uint32_t Tickstart); +static HAL_StatusTypeDef I2C_RequestMemoryRead(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, uint32_t Tickstart); +static HAL_StatusTypeDef I2C_WaitOnFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Flag, FlagStatus Status, uint32_t Timeout, uint32_t Tickstart); +static HAL_StatusTypeDef I2C_WaitOnMasterAddressFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Flag, uint32_t Timeout, uint32_t Tickstart); +static HAL_StatusTypeDef I2C_WaitOnTXEFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart); +static HAL_StatusTypeDef I2C_WaitOnBTFFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart); +static HAL_StatusTypeDef I2C_WaitOnRXNEFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart); +static HAL_StatusTypeDef I2C_WaitOnSTOPFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart); +static HAL_StatusTypeDef I2C_IsAcknowledgeFailed(I2C_HandleTypeDef *hi2c); + +/* Private functions for I2C transfer IRQ handler */ +static HAL_StatusTypeDef I2C_MasterTransmit_TXE(I2C_HandleTypeDef *hi2c); +static HAL_StatusTypeDef I2C_MasterTransmit_BTF(I2C_HandleTypeDef *hi2c); +static HAL_StatusTypeDef I2C_MasterReceive_RXNE(I2C_HandleTypeDef *hi2c); +static HAL_StatusTypeDef I2C_MasterReceive_BTF(I2C_HandleTypeDef *hi2c); +static HAL_StatusTypeDef I2C_Master_SB(I2C_HandleTypeDef *hi2c); +static HAL_StatusTypeDef I2C_Master_ADD10(I2C_HandleTypeDef *hi2c); +static HAL_StatusTypeDef I2C_Master_ADDR(I2C_HandleTypeDef *hi2c); + +static HAL_StatusTypeDef I2C_SlaveTransmit_TXE(I2C_HandleTypeDef *hi2c); +static HAL_StatusTypeDef I2C_SlaveTransmit_BTF(I2C_HandleTypeDef *hi2c); +static HAL_StatusTypeDef I2C_SlaveReceive_RXNE(I2C_HandleTypeDef *hi2c); +static HAL_StatusTypeDef I2C_SlaveReceive_BTF(I2C_HandleTypeDef *hi2c); +static HAL_StatusTypeDef I2C_Slave_ADDR(I2C_HandleTypeDef *hi2c); +static HAL_StatusTypeDef I2C_Slave_STOPF(I2C_HandleTypeDef *hi2c); +static HAL_StatusTypeDef I2C_Slave_AF(I2C_HandleTypeDef *hi2c); +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup I2C_Exported_Functions I2C Exported Functions + * @{ + */ + +/** @defgroup I2C_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] This subsection provides a set of functions allowing to initialize and + deinitialize the I2Cx peripheral: + + (+) User must Implement HAL_I2C_MspInit() function in which he configures + all related peripherals resources (CLOCK, GPIO, DMA, IT and NVIC ). + + (+) Call the function HAL_I2C_Init() to configure the selected device with + the selected configuration: + (++) Communication Speed + (++) Duty cycle + (++) Addressing mode + (++) Own Address 1 + (++) Dual Addressing mode + (++) Own Address 2 + (++) General call mode + (++) Nostretch mode + + (+) Call the function HAL_I2C_DeInit() to restore the default configuration + of the selected I2Cx peripheral. + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the I2C according to the specified parameters + * in the I2C_InitTypeDef and initialize the associated handle. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Init(I2C_HandleTypeDef *hi2c) +{ + uint32_t freqrange = 0U; + uint32_t pclk1 = 0U; + + /* Check the I2C handle allocation */ + if(hi2c == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); + assert_param(IS_I2C_CLOCK_SPEED(hi2c->Init.ClockSpeed)); + assert_param(IS_I2C_DUTY_CYCLE(hi2c->Init.DutyCycle)); + assert_param(IS_I2C_OWN_ADDRESS1(hi2c->Init.OwnAddress1)); + assert_param(IS_I2C_ADDRESSING_MODE(hi2c->Init.AddressingMode)); + assert_param(IS_I2C_DUAL_ADDRESS(hi2c->Init.DualAddressMode)); + assert_param(IS_I2C_OWN_ADDRESS2(hi2c->Init.OwnAddress2)); + assert_param(IS_I2C_GENERAL_CALL(hi2c->Init.GeneralCallMode)); + assert_param(IS_I2C_NO_STRETCH(hi2c->Init.NoStretchMode)); + + if(hi2c->State == HAL_I2C_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hi2c->Lock = HAL_UNLOCKED; + + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + HAL_I2C_MspInit(hi2c); + } + + /* Get PCLK1 frequency */ + pclk1 = HAL_RCC_GetPCLK1Freq(); + + /* The minimum allowed frequency is 2 MHz */ + if(pclk1 < I2C_MIN_PCLK_FREQ) + { + return HAL_ERROR; + } + + hi2c->State = HAL_I2C_STATE_BUSY; + + /* Disable the selected I2C peripheral */ + __HAL_I2C_DISABLE(hi2c); + + /* Calculate frequency range */ + freqrange = I2C_FREQ_RANGE(pclk1); + + /*---------------------------- I2Cx CR2 Configuration ----------------------*/ + /* Configure I2Cx: Frequency range */ + MODIFY_REG(hi2c->Instance->CR2, I2C_CR2_FREQ, freqrange); + + /*---------------------------- I2Cx TRISE Configuration --------------------*/ + /* Configure I2Cx: Rise Time */ + MODIFY_REG(hi2c->Instance->TRISE, I2C_TRISE_TRISE, I2C_RISE_TIME(freqrange, hi2c->Init.ClockSpeed)); + + /*---------------------------- I2Cx CCR Configuration ----------------------*/ + /* Configure I2Cx: Speed */ + MODIFY_REG(hi2c->Instance->CCR, (I2C_CCR_FS | I2C_CCR_DUTY | I2C_CCR_CCR), I2C_SPEED(pclk1, hi2c->Init.ClockSpeed, hi2c->Init.DutyCycle)); + + /*---------------------------- I2Cx CR1 Configuration ----------------------*/ + /* Configure I2Cx: Generalcall and NoStretch mode */ + MODIFY_REG(hi2c->Instance->CR1, (I2C_CR1_ENGC | I2C_CR1_NOSTRETCH), (hi2c->Init.GeneralCallMode | hi2c->Init.NoStretchMode)); + + /*---------------------------- I2Cx OAR1 Configuration ---------------------*/ + /* Configure I2Cx: Own Address1 and addressing mode */ + MODIFY_REG(hi2c->Instance->OAR1, (I2C_OAR1_ADDMODE | I2C_OAR1_ADD8_9 | I2C_OAR1_ADD1_7 | I2C_OAR1_ADD0), (hi2c->Init.AddressingMode | hi2c->Init.OwnAddress1)); + + /*---------------------------- I2Cx OAR2 Configuration ---------------------*/ + /* Configure I2Cx: Dual mode and Own Address2 */ + MODIFY_REG(hi2c->Instance->OAR2, (I2C_OAR2_ENDUAL | I2C_OAR2_ADD2), (hi2c->Init.DualAddressMode | hi2c->Init.OwnAddress2)); + + /* Enable the selected I2C peripheral */ + __HAL_I2C_ENABLE(hi2c); + + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->Mode = HAL_I2C_MODE_NONE; + + return HAL_OK; +} + +/** + * @brief DeInitialize the I2C peripheral. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_DeInit(I2C_HandleTypeDef *hi2c) +{ + /* Check the I2C handle allocation */ + if(hi2c == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); + + hi2c->State = HAL_I2C_STATE_BUSY; + + /* Disable the I2C Peripheral Clock */ + __HAL_I2C_DISABLE(hi2c); + + /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ + HAL_I2C_MspDeInit(hi2c); + + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + hi2c->State = HAL_I2C_STATE_RESET; + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Release Lock */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; +} + +/** + * @brief Initialize the I2C MSP. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ + __weak void HAL_I2C_MspInit(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitialize the I2C MSP. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ + __weak void HAL_I2C_MspDeInit(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_MspDeInit could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup I2C_Exported_Functions_Group2 Input and Output operation functions + * @brief Data transfers functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to manage the I2C data + transfers. + + (#) There are two modes of transfer: + (++) Blocking mode : The communication is performed in the polling mode. + The status of all data processing is returned by the same function + after finishing transfer. + (++) No-Blocking mode : The communication is performed using Interrupts + or DMA. These functions return the status of the transfer startup. + The end of the data processing will be indicated through the + dedicated I2C IRQ when using Interrupt mode or the DMA IRQ when + using DMA mode. + + (#) Blocking mode functions are : + (++) HAL_I2C_Master_Transmit() + (++) HAL_I2C_Master_Receive() + (++) HAL_I2C_Slave_Transmit() + (++) HAL_I2C_Slave_Receive() + (++) HAL_I2C_Mem_Write() + (++) HAL_I2C_Mem_Read() + (++) HAL_I2C_IsDeviceReady() + + (#) No-Blocking mode functions with Interrupt are : + (++) HAL_I2C_Master_Transmit_IT() + (++) HAL_I2C_Master_Receive_IT() + (++) HAL_I2C_Slave_Transmit_IT() + (++) HAL_I2C_Slave_Receive_IT() + (++) HAL_I2C_Master_Sequential_Transmit_IT() + (++) HAL_I2C_Master_Sequential_Receive_IT() + (++) HAL_I2C_Slave_Sequential_Transmit_IT() + (++) HAL_I2C_Slave_Sequential_Receive_IT() + (++) HAL_I2C_Mem_Write_IT() + (++) HAL_I2C_Mem_Read_IT() + + (#) No-Blocking mode functions with DMA are : + (++) HAL_I2C_Master_Transmit_DMA() + (++) HAL_I2C_Master_Receive_DMA() + (++) HAL_I2C_Slave_Transmit_DMA() + (++) HAL_I2C_Slave_Receive_DMA() + (++) HAL_I2C_Mem_Write_DMA() + (++) HAL_I2C_Mem_Read_DMA() + + (#) A set of Transfer Complete Callbacks are provided in non Blocking mode: + (++) HAL_I2C_MemTxCpltCallback() + (++) HAL_I2C_MemRxCpltCallback() + (++) HAL_I2C_MasterTxCpltCallback() + (++) HAL_I2C_MasterRxCpltCallback() + (++) HAL_I2C_SlaveTxCpltCallback() + (++) HAL_I2C_SlaveRxCpltCallback() + (++) HAL_I2C_ErrorCallback() + (++) HAL_I2C_AbortCpltCallback() + +@endverbatim + * @{ + */ + +/** + * @brief Transmits in master mode an amount of data in blocking mode. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shift at right before call interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Transmit(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + uint32_t tickstart = 0x00U; + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + if(hi2c->State == HAL_I2C_STATE_READY) + { + /* Wait until BUSY flag is reset */ + if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG, tickstart) != HAL_OK) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Check if the I2C is already enabled */ + if((hi2c->Instance->CR1 & I2C_CR1_PE) != I2C_CR1_PE) + { + /* Enable I2C peripheral */ + __HAL_I2C_ENABLE(hi2c); + } + + /* Disable Pos */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_POS); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferSize = hi2c->XferCount; + + /* Send Slave Address */ + if(I2C_MasterRequestWrite(hi2c, DevAddress, Timeout, tickstart) != HAL_OK) + { + if(hi2c->ErrorCode == HAL_I2C_ERROR_AF) + { + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_ERROR; + } + else + { + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_TIMEOUT; + } + } + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + + while(hi2c->XferSize > 0U) + { + /* Wait until TXE flag is set */ + if(I2C_WaitOnTXEFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + if(hi2c->ErrorCode == HAL_I2C_ERROR_AF) + { + /* Generate Stop */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_STOP); + return HAL_ERROR; + } + else + { + return HAL_TIMEOUT; + } + } + + /* Write data to DR */ + hi2c->Instance->DR = (*hi2c->pBuffPtr++); + hi2c->XferCount--; + hi2c->XferSize--; + + if((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BTF) == SET) && (Size != 0U)) + { + /* Write data to DR */ + hi2c->Instance->DR = (*hi2c->pBuffPtr++); + hi2c->XferCount--; + hi2c->XferSize--; + } + + /* Wait until BTF flag is set */ + if(I2C_WaitOnBTFFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + if(hi2c->ErrorCode == HAL_I2C_ERROR_AF) + { + /* Generate Stop */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_STOP); + return HAL_ERROR; + } + else + { + return HAL_TIMEOUT; + } + } + } + + /* Generate Stop */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_STOP); + + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receives in master mode an amount of data in blocking mode. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shift at right before call interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + uint32_t tickstart = 0x00U; + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + if(hi2c->State == HAL_I2C_STATE_READY) + { + /* Wait until BUSY flag is reset */ + if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG, tickstart) != HAL_OK) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Check if the I2C is already enabled */ + if((hi2c->Instance->CR1 & I2C_CR1_PE) != I2C_CR1_PE) + { + /* Enable I2C peripheral */ + __HAL_I2C_ENABLE(hi2c); + } + + /* Disable Pos */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_POS); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferSize = hi2c->XferCount; + + /* Send Slave Address */ + if(I2C_MasterRequestRead(hi2c, DevAddress, Timeout, tickstart) != HAL_OK) + { + if(hi2c->ErrorCode == HAL_I2C_ERROR_AF) + { + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_ERROR; + } + else + { + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_TIMEOUT; + } + } + + if(hi2c->XferSize == 0U) + { + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + + /* Generate Stop */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_STOP); + } + else if(hi2c->XferSize == 1U) + { + /* Disable Acknowledge */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + + /* Generate Stop */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_STOP); + } + else if(hi2c->XferSize == 2U) + { + /* Disable Acknowledge */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + + /* Enable Pos */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_POS); + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + } + else + { + /* Enable Acknowledge */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + } + + while(hi2c->XferSize > 0U) + { + if(hi2c->XferSize <= 3U) + { + /* One byte */ + if(hi2c->XferSize == 1U) + { + /* Wait until RXNE flag is set */ + if(I2C_WaitOnRXNEFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + if(hi2c->ErrorCode == HAL_I2C_ERROR_TIMEOUT) + { + return HAL_TIMEOUT; + } + else + { + return HAL_ERROR; + } + } + + /* Read data from DR */ + (*hi2c->pBuffPtr++) = hi2c->Instance->DR; + hi2c->XferSize--; + hi2c->XferCount--; + } + /* Two bytes */ + else if(hi2c->XferSize == 2U) + { + /* Wait until BTF flag is set */ + if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BTF, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_TIMEOUT; + } + + /* Generate Stop */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_STOP); + + /* Read data from DR */ + (*hi2c->pBuffPtr++) = hi2c->Instance->DR; + hi2c->XferSize--; + hi2c->XferCount--; + + /* Read data from DR */ + (*hi2c->pBuffPtr++) = hi2c->Instance->DR; + hi2c->XferSize--; + hi2c->XferCount--; + } + /* 3 Last bytes */ + else + { + /* Wait until BTF flag is set */ + if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BTF, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_TIMEOUT; + } + + /* Disable Acknowledge */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + + /* Read data from DR */ + (*hi2c->pBuffPtr++) = hi2c->Instance->DR; + hi2c->XferSize--; + hi2c->XferCount--; + + /* Wait until BTF flag is set */ + if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BTF, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_TIMEOUT; + } + + /* Generate Stop */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_STOP); + + /* Read data from DR */ + (*hi2c->pBuffPtr++) = hi2c->Instance->DR; + hi2c->XferSize--; + hi2c->XferCount--; + + /* Read data from DR */ + (*hi2c->pBuffPtr++) = hi2c->Instance->DR; + hi2c->XferSize--; + hi2c->XferCount--; + } + } + else + { + /* Wait until RXNE flag is set */ + if(I2C_WaitOnRXNEFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + if(hi2c->ErrorCode == HAL_I2C_ERROR_TIMEOUT) + { + return HAL_TIMEOUT; + } + else + { + return HAL_ERROR; + } + } + + /* Read data from DR */ + (*hi2c->pBuffPtr++) = hi2c->Instance->DR; + hi2c->XferSize--; + hi2c->XferCount--; + + if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BTF) == SET) + { + /* Read data from DR */ + (*hi2c->pBuffPtr++) = hi2c->Instance->DR; + hi2c->XferSize--; + hi2c->XferCount--; + } + } + } + + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Transmits in slave mode an amount of data in blocking mode. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Transmit(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + uint32_t tickstart = 0x00U; + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + if(hi2c->State == HAL_I2C_STATE_READY) + { + if((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Check if the I2C is already enabled */ + if((hi2c->Instance->CR1 & I2C_CR1_PE) != I2C_CR1_PE) + { + /* Enable I2C peripheral */ + __HAL_I2C_ENABLE(hi2c); + } + + /* Disable Pos */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_POS); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferSize = hi2c->XferCount; + + /* Enable Address Acknowledge */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + + /* Wait until ADDR flag is set */ + if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_TIMEOUT; + } + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + + /* If 10bit addressing mode is selected */ + if(hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_10BIT) + { + /* Wait until ADDR flag is set */ + if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_TIMEOUT; + } + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + } + + while(hi2c->XferSize > 0U) + { + /* Wait until TXE flag is set */ + if(I2C_WaitOnTXEFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + if(hi2c->ErrorCode == HAL_I2C_ERROR_AF) + { + return HAL_ERROR; + } + else + { + return HAL_TIMEOUT; + } + } + + /* Write data to DR */ + hi2c->Instance->DR = (*hi2c->pBuffPtr++); + hi2c->XferCount--; + hi2c->XferSize--; + + if((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BTF) == SET) && (Size != 0U)) + { + /* Write data to DR */ + hi2c->Instance->DR = (*hi2c->pBuffPtr++); + hi2c->XferCount--; + hi2c->XferSize--; + } + } + + /* Wait until AF flag is set */ + if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_AF, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_TIMEOUT; + } + + /* Clear AF flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Disable Address Acknowledge */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive in slave mode an amount of data in blocking mode + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Receive(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + uint32_t tickstart = 0x00U; + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + if(hi2c->State == HAL_I2C_STATE_READY) + { + if((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Check if the I2C is already enabled */ + if((hi2c->Instance->CR1 & I2C_CR1_PE) != I2C_CR1_PE) + { + /* Enable I2C peripheral */ + __HAL_I2C_ENABLE(hi2c); + } + + /* Disable Pos */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_POS); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferSize = hi2c->XferCount; + + /* Enable Address Acknowledge */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + + /* Wait until ADDR flag is set */ + if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_TIMEOUT; + } + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + + while(hi2c->XferSize > 0U) + { + /* Wait until RXNE flag is set */ + if(I2C_WaitOnRXNEFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + if(hi2c->ErrorCode == HAL_I2C_ERROR_TIMEOUT) + { + return HAL_TIMEOUT; + } + else + { + return HAL_ERROR; + } + } + + /* Read data from DR */ + (*hi2c->pBuffPtr++) = hi2c->Instance->DR; + hi2c->XferSize--; + hi2c->XferCount--; + + if((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BTF) == SET) && (Size != 0U)) + { + /* Read data from DR */ + (*hi2c->pBuffPtr++) = hi2c->Instance->DR; + hi2c->XferSize--; + hi2c->XferCount--; + } + } + + /* Wait until STOP flag is set */ + if(I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + + if(hi2c->ErrorCode == HAL_I2C_ERROR_AF) + { + return HAL_ERROR; + } + else + { + return HAL_TIMEOUT; + } + } + + /* Clear STOP flag */ + __HAL_I2C_CLEAR_STOPFLAG(hi2c); + + /* Disable Address Acknowledge */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Transmit in master mode an amount of data in non-blocking mode with Interrupt + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shift at right before call interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size) +{ + __IO uint32_t count = 0U; + + if(hi2c->State == HAL_I2C_STATE_READY) + { + /* Wait until BUSY flag is reset */ + count = I2C_TIMEOUT_BUSY_FLAG * (SystemCoreClock /25U /1000U); + do + { + if(count-- == 0U) + { + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->State= HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_TIMEOUT; + } + } + while(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) != RESET); + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Check if the I2C is already enabled */ + if((hi2c->Instance->CR1 & I2C_CR1_PE) != I2C_CR1_PE) + { + /* Enable I2C peripheral */ + __HAL_I2C_ENABLE(hi2c); + } + + /* Disable Pos */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_POS); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferSize = hi2c->XferCount; + hi2c->Devaddress = DevAddress; + + /* Generate Start */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_START); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable EVT, BUF and ERR interrupt */ + __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive in master mode an amount of data in non-blocking mode with Interrupt + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shift at right before call interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size) +{ + __IO uint32_t count = 0U; + + if(hi2c->State == HAL_I2C_STATE_READY) + { + /* Wait until BUSY flag is reset */ + count = I2C_TIMEOUT_BUSY_FLAG * (SystemCoreClock /25U /1000U); + do + { + if(count-- == 0U) + { + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->State= HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_TIMEOUT; + } + } + while(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) != RESET); + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Check if the I2C is already enabled */ + if((hi2c->Instance->CR1 & I2C_CR1_PE) != I2C_CR1_PE) + { + /* Enable I2C peripheral */ + __HAL_I2C_ENABLE(hi2c); + } + + /* Disable Pos */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_POS); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferSize = hi2c->XferCount; + hi2c->Devaddress = DevAddress; + + /* Enable Acknowledge */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + + /* Generate Start */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_START); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable EVT, BUF and ERR interrupt */ + __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Sequential transmit in master mode an amount of data in non-blocking mode with Interrupt + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shift at right before call interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XferOptions_definition + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Sequential_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions) +{ + __IO uint32_t count = 0U; + + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if(hi2c->State == HAL_I2C_STATE_READY) + { + /* Check Busy Flag only if FIRST call of Master interface */ + if((XferOptions == I2C_FIRST_AND_LAST_FRAME) || (XferOptions == I2C_FIRST_FRAME)) + { + /* Wait until BUSY flag is reset */ + count = I2C_TIMEOUT_BUSY_FLAG * (SystemCoreClock /25U /1000U); + do + { + if(count-- == 0U) + { + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->State= HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_TIMEOUT; + } + } + while(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) != RESET); + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Check if the I2C is already enabled */ + if((hi2c->Instance->CR1 & I2C_CR1_PE) != I2C_CR1_PE) + { + /* Enable I2C peripheral */ + __HAL_I2C_ENABLE(hi2c); + } + + /* Disable Pos */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_POS); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = XferOptions; + hi2c->XferSize = hi2c->XferCount; + hi2c->Devaddress = DevAddress; + + /* Generate Start */ + if((hi2c->PreviousState == I2C_STATE_MASTER_BUSY_RX) || (hi2c->PreviousState == I2C_STATE_NONE)) + { + /* Generate Start condition if first transfer */ + if((XferOptions == I2C_FIRST_AND_LAST_FRAME) || (XferOptions == I2C_FIRST_FRAME)) + { + /* Generate Start */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_START); + } + else if(hi2c->PreviousState == I2C_STATE_MASTER_BUSY_RX) + { + /* Generate ReStart */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_START); + } + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable EVT, BUF and ERR interrupt */ + __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Sequential receive in master mode an amount of data in non-blocking mode with Interrupt + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shift at right before call interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XferOptions_definition + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Sequential_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions) +{ + __IO uint32_t count = 0U; + + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if(hi2c->State == HAL_I2C_STATE_READY) + { + /* Check Busy Flag only if FIRST call of Master interface */ + if((XferOptions == I2C_FIRST_AND_LAST_FRAME) || (XferOptions == I2C_FIRST_FRAME)) + { + /* Wait until BUSY flag is reset */ + count = I2C_TIMEOUT_BUSY_FLAG * (SystemCoreClock /25U /1000U); + do + { + if(count-- == 0U) + { + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->State= HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_TIMEOUT; + } + } + while(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) != RESET); + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Check if the I2C is already enabled */ + if((hi2c->Instance->CR1 & I2C_CR1_PE) != I2C_CR1_PE) + { + /* Enable I2C peripheral */ + __HAL_I2C_ENABLE(hi2c); + } + + /* Disable Pos */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_POS); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = XferOptions; + hi2c->XferSize = hi2c->XferCount; + hi2c->Devaddress = DevAddress; + + if((hi2c->PreviousState == I2C_STATE_MASTER_BUSY_TX) || (hi2c->PreviousState == I2C_STATE_NONE)) + { + /* Generate Start condition if first transfer */ + if((XferOptions == I2C_FIRST_AND_LAST_FRAME) || (XferOptions == I2C_FIRST_FRAME) || (XferOptions == I2C_NO_OPTION_FRAME)) + { + /* Enable Acknowledge */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + + /* Generate Start */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_START); + } + else if(hi2c->PreviousState == I2C_STATE_MASTER_BUSY_TX) + { + /* Enable Acknowledge */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + + /* Generate ReStart */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_START); + } + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable EVT, BUF and ERR interrupt */ + __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Transmit in slave mode an amount of data in non-blocking mode with Interrupt + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size) +{ + if(hi2c->State == HAL_I2C_STATE_READY) + { + if((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Check if the I2C is already enabled */ + if((hi2c->Instance->CR1 & I2C_CR1_PE) != I2C_CR1_PE) + { + /* Enable I2C peripheral */ + __HAL_I2C_ENABLE(hi2c); + } + + /* Disable Pos */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_POS); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferSize = hi2c->XferCount; + + /* Enable Address Acknowledge */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable EVT, BUF and ERR interrupt */ + __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive in slave mode an amount of data in non-blocking mode with Interrupt + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size) +{ + if(hi2c->State == HAL_I2C_STATE_READY) + { + if((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Check if the I2C is already enabled */ + if((hi2c->Instance->CR1 & I2C_CR1_PE) != I2C_CR1_PE) + { + /* Enable I2C peripheral */ + __HAL_I2C_ENABLE(hi2c); + } + + /* Disable Pos */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_POS); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferSize = Size; + + /* Enable Address Acknowledge */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable EVT, BUF and ERR interrupt */ + __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Sequential transmit in slave mode an amount of data in non-blocking mode with Interrupt + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XferOptions_definition + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Sequential_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions) +{ + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if(hi2c->State == HAL_I2C_STATE_LISTEN) + { + if((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Check if the I2C is already enabled */ + if((hi2c->Instance->CR1 & I2C_CR1_PE) != I2C_CR1_PE) + { + /* Enable I2C peripheral */ + __HAL_I2C_ENABLE(hi2c); + } + + /* Disable Pos */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_POS); + + hi2c->State = HAL_I2C_STATE_BUSY_TX_LISTEN; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = XferOptions; + hi2c->XferSize = hi2c->XferCount; + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable EVT, BUF and ERR interrupt */ + __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Sequential receive in slave mode an amount of data in non-blocking mode with Interrupt + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XferOptions_definition + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Sequential_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions) +{ + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if(hi2c->State == HAL_I2C_STATE_LISTEN) + { + if((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Check if the I2C is already enabled */ + if((hi2c->Instance->CR1 & I2C_CR1_PE) != I2C_CR1_PE) + { + /* Enable I2C peripheral */ + __HAL_I2C_ENABLE(hi2c); + } + + /* Disable Pos */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_POS); + + hi2c->State = HAL_I2C_STATE_BUSY_RX_LISTEN; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = XferOptions; + hi2c->XferSize = hi2c->XferCount; + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable EVT, BUF and ERR interrupt */ + __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Enable the Address listen mode with Interrupt. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_EnableListen_IT(I2C_HandleTypeDef *hi2c) +{ + if(hi2c->State == HAL_I2C_STATE_READY) + { + hi2c->State = HAL_I2C_STATE_LISTEN; + + /* Check if the I2C is already enabled */ + if((hi2c->Instance->CR1 & I2C_CR1_PE) != I2C_CR1_PE) + { + /* Enable I2C peripheral */ + __HAL_I2C_ENABLE(hi2c); + } + + /* Enable Address Acknowledge */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + + /* Enable EVT and ERR interrupt */ + __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_ERR); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Disable the Address listen mode with Interrupt. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_DisableListen_IT(I2C_HandleTypeDef *hi2c) +{ + /* Declaration of tmp to prevent undefined behavior of volatile usage */ + uint32_t tmp; + + /* Disable Address listen mode only if a transfer is not ongoing */ + if(hi2c->State == HAL_I2C_STATE_LISTEN) + { + tmp = (uint32_t)(hi2c->State) & I2C_STATE_MSK; + hi2c->PreviousState = tmp | (uint32_t)(hi2c->Mode); + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Disable Address Acknowledge */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + + /* Disable EVT and ERR interrupt */ + __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_ERR); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Transmit in master mode an amount of data in non-blocking mode with DMA + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shift at right before call interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size) +{ + __IO uint32_t count = 0U; + + if(hi2c->State == HAL_I2C_STATE_READY) + { + /* Wait until BUSY flag is reset */ + count = I2C_TIMEOUT_BUSY_FLAG * (SystemCoreClock /25U /1000U); + do + { + if(count-- == 0U) + { + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->State= HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_TIMEOUT; + } + } + while(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) != RESET); + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Check if the I2C is already enabled */ + if((hi2c->Instance->CR1 & I2C_CR1_PE) != I2C_CR1_PE) + { + /* Enable I2C peripheral */ + __HAL_I2C_ENABLE(hi2c); + } + + /* Disable Pos */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_POS); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferSize = hi2c->XferCount; + hi2c->Devaddress = DevAddress; + + if(hi2c->XferSize > 0U) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmatx->XferCpltCallback = I2C_DMAXferCplt; + + /* Set the DMA error callback */ + hi2c->hdmatx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmatx->XferHalfCpltCallback = NULL; + hi2c->hdmatx->XferAbortCallback = NULL; + + /* Enable the DMA Channel */ + HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)hi2c->pBuffPtr, (uint32_t)&hi2c->Instance->DR, hi2c->XferSize); + + /* Enable Acknowledge */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + + /* Generate Start */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_START); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable EVT and ERR interrupt */ + __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_ERR); + + /* Enable DMA Request */ + SET_BIT(hi2c->Instance->CR2, I2C_CR2_DMAEN); + } + else + { + /* Enable Acknowledge */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + + /* Generate Start */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_START); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable EVT, BUF and ERR interrupt */ + __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR); + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive in master mode an amount of data in non-blocking mode with DMA + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shift at right before call interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size) +{ + __IO uint32_t count = 0U; + + if(hi2c->State == HAL_I2C_STATE_READY) + { + /* Wait until BUSY flag is reset */ + count = I2C_TIMEOUT_BUSY_FLAG * (SystemCoreClock /25U /1000U); + do + { + if(count-- == 0U) + { + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->State= HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_TIMEOUT; + } + } + while(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) != RESET); + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Check if the I2C is already enabled */ + if((hi2c->Instance->CR1 & I2C_CR1_PE) != I2C_CR1_PE) + { + /* Enable I2C peripheral */ + __HAL_I2C_ENABLE(hi2c); + } + + /* Disable Pos */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_POS); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferSize = hi2c->XferCount; + hi2c->Devaddress = DevAddress; + + if(hi2c->XferSize > 0U) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmarx->XferCpltCallback = I2C_DMAXferCplt; + + /* Set the DMA error callback */ + hi2c->hdmarx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmarx->XferHalfCpltCallback = NULL; + hi2c->hdmarx->XferAbortCallback = NULL; + + /* Enable the DMA Channel */ + HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->DR, (uint32_t)hi2c->pBuffPtr, hi2c->XferSize); + + /* Enable Acknowledge */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + + /* Generate Start */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_START); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable EVT and ERR interrupt */ + __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_ERR); + + /* Enable DMA Request */ + SET_BIT(hi2c->Instance->CR2, I2C_CR2_DMAEN); + } + else + { + /* Enable Acknowledge */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + + /* Generate Start */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_START); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable EVT, BUF and ERR interrupt */ + __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR); + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Abort a master I2C process communication with Interrupt. + * @note This abort can be called only if state is ready + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shift at right before call interface + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Abort_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress) +{ + /* Abort Master transfer during Receive or Transmit process */ + if(hi2c->Mode == HAL_I2C_MODE_MASTER) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->State = HAL_I2C_STATE_ABORT; + + /* Disable Acknowledge */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + + /* Generate Stop */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_STOP); + + hi2c->XferCount = 0U; + + /* Disable EVT, BUF and ERR interrupt */ + __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c); + + return HAL_OK; + } + else + { + /* Wrong usage of abort function */ + /* This function should be used only in case of abort monitored by master device */ + return HAL_ERROR; + } +} + +/** + * @brief Transmit in slave mode an amount of data in non-blocking mode with DMA + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size) +{ + if(hi2c->State == HAL_I2C_STATE_READY) + { + if((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Check if the I2C is already enabled */ + if((hi2c->Instance->CR1 & I2C_CR1_PE) != I2C_CR1_PE) + { + /* Enable I2C peripheral */ + __HAL_I2C_ENABLE(hi2c); + } + + /* Disable Pos */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_POS); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferSize = hi2c->XferCount; + + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmatx->XferCpltCallback = I2C_DMAXferCplt; + + /* Set the DMA error callback */ + hi2c->hdmatx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmatx->XferHalfCpltCallback = NULL; + hi2c->hdmatx->XferAbortCallback = NULL; + + /* Enable the DMA Channel */ + HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)hi2c->pBuffPtr, (uint32_t)&hi2c->Instance->DR, hi2c->XferSize); + + /* Enable Address Acknowledge */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable EVT and ERR interrupt */ + __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_ERR); + + /* Enable DMA Request */ + hi2c->Instance->CR2 |= I2C_CR2_DMAEN; + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive in slave mode an amount of data in non-blocking mode with DMA + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size) +{ + if(hi2c->State == HAL_I2C_STATE_READY) + { + if((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Check if the I2C is already enabled */ + if((hi2c->Instance->CR1 & I2C_CR1_PE) != I2C_CR1_PE) + { + /* Enable I2C peripheral */ + __HAL_I2C_ENABLE(hi2c); + } + + /* Disable Pos */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_POS); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferSize = hi2c->XferCount; + + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmarx->XferCpltCallback = I2C_DMAXferCplt; + + /* Set the DMA error callback */ + hi2c->hdmarx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmarx->XferHalfCpltCallback = NULL; + hi2c->hdmarx->XferAbortCallback = NULL; + + /* Enable the DMA Channel */ + HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->DR, (uint32_t)hi2c->pBuffPtr, hi2c->XferSize); + + /* Enable Address Acknowledge */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable EVT and ERR interrupt */ + __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_ERR); + + /* Enable DMA Request */ + SET_BIT(hi2c->Instance->CR2, I2C_CR2_DMAEN); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} +/** + * @brief Write an amount of data in blocking mode to a specific memory address + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shift at right before call interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Mem_Write(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + uint32_t tickstart = 0x00U; + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + /* Check the parameters */ + assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); + + if(hi2c->State == HAL_I2C_STATE_READY) + { + if((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Wait until BUSY flag is reset */ + if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG, tickstart) != HAL_OK) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Check if the I2C is already enabled */ + if((hi2c->Instance->CR1 & I2C_CR1_PE) != I2C_CR1_PE) + { + /* Enable I2C peripheral */ + __HAL_I2C_ENABLE(hi2c); + } + + /* Disable Pos */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_POS); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MEM; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferSize = hi2c->XferCount; + + /* Send Slave Address and Memory Address */ + if(I2C_RequestMemoryWrite(hi2c, DevAddress, MemAddress, MemAddSize, Timeout, tickstart) != HAL_OK) + { + if(hi2c->ErrorCode == HAL_I2C_ERROR_AF) + { + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_ERROR; + } + else + { + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_TIMEOUT; + } + } + + while(hi2c->XferSize > 0U) + { + /* Wait until TXE flag is set */ + if(I2C_WaitOnTXEFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + if(hi2c->ErrorCode == HAL_I2C_ERROR_AF) + { + /* Generate Stop */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_STOP); + return HAL_ERROR; + } + else + { + return HAL_TIMEOUT; + } + } + + /* Write data to DR */ + hi2c->Instance->DR = (*hi2c->pBuffPtr++); + hi2c->XferSize--; + hi2c->XferCount--; + + if((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BTF) == SET) && (hi2c->XferSize != 0U)) + { + /* Write data to DR */ + hi2c->Instance->DR = (*hi2c->pBuffPtr++); + hi2c->XferSize--; + hi2c->XferCount--; + } + } + + /* Wait until BTF flag is set */ + if(I2C_WaitOnBTFFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + if(hi2c->ErrorCode == HAL_I2C_ERROR_AF) + { + /* Generate Stop */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_STOP); + return HAL_ERROR; + } + else + { + return HAL_TIMEOUT; + } + } + + /* Generate Stop */ + SET_BIT(hi2c->Instance->CR1,I2C_CR1_STOP); + + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Read an amount of data in blocking mode from a specific memory address + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shift at right before call interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + uint32_t tickstart = 0x00U; + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + /* Check the parameters */ + assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); + + if(hi2c->State == HAL_I2C_STATE_READY) + { + if((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Wait until BUSY flag is reset */ + if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG, tickstart) != HAL_OK) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Check if the I2C is already enabled */ + if((hi2c->Instance->CR1 & I2C_CR1_PE) != I2C_CR1_PE) + { + /* Enable I2C peripheral */ + __HAL_I2C_ENABLE(hi2c); + } + + /* Disable Pos */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_POS); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MEM; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferSize = hi2c->XferCount; + + /* Send Slave Address and Memory Address */ + if(I2C_RequestMemoryRead(hi2c, DevAddress, MemAddress, MemAddSize, Timeout, tickstart) != HAL_OK) + { + if(hi2c->ErrorCode == HAL_I2C_ERROR_AF) + { + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_ERROR; + } + else + { + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_TIMEOUT; + } + } + + if(hi2c->XferSize == 1U) + { + /* Disable Acknowledge */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + + /* Generate Stop */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_STOP); + } + else if(hi2c->XferSize == 2U) + { + /* Disable Acknowledge */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + + /* Enable Pos */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_POS); + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + } + else + { + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + } + + while(hi2c->XferSize > 0U) + { + if(hi2c->XferSize <= 3U) + { + /* One byte */ + if(hi2c->XferSize== 1U) + { + /* Wait until RXNE flag is set */ + if(I2C_WaitOnRXNEFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + if(hi2c->ErrorCode == HAL_I2C_ERROR_TIMEOUT) + { + return HAL_TIMEOUT; + } + else + { + return HAL_ERROR; + } + } + + /* Read data from DR */ + (*hi2c->pBuffPtr++) = hi2c->Instance->DR; + hi2c->XferSize--; + hi2c->XferCount--; + } + /* Two bytes */ + else if(Size == 2U) + { + /* Wait until BTF flag is set */ + if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BTF, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_TIMEOUT; + } + + /* Generate Stop */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_STOP); + + /* Read data from DR */ + (*hi2c->pBuffPtr++) = hi2c->Instance->DR; + hi2c->XferSize--; + hi2c->XferCount--; + + /* Read data from DR */ + (*hi2c->pBuffPtr++) = hi2c->Instance->DR; + hi2c->XferSize--; + hi2c->XferCount--; + } + /* 3 Last bytes */ + else + { + /* Wait until BTF flag is set */ + if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BTF, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_TIMEOUT; + } + + /* Disable Acknowledge */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + + /* Read data from DR */ + (*hi2c->pBuffPtr++) = hi2c->Instance->DR; + hi2c->XferSize--; + hi2c->XferCount--; + + /* Wait until BTF flag is set */ + if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BTF, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_TIMEOUT; + } + + /* Generate Stop */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_STOP); + + /* Read data from DR */ + (*hi2c->pBuffPtr++) = hi2c->Instance->DR; + hi2c->XferSize--; + hi2c->XferCount--; + + /* Read data from DR */ + (*hi2c->pBuffPtr++) = hi2c->Instance->DR; + hi2c->XferSize--; + hi2c->XferCount--; + } + } + else + { + /* Wait until RXNE flag is set */ + if(I2C_WaitOnRXNEFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + if(hi2c->ErrorCode == HAL_I2C_ERROR_TIMEOUT) + { + return HAL_TIMEOUT; + } + else + { + return HAL_ERROR; + } + } + + /* Read data from DR */ + (*hi2c->pBuffPtr++) = hi2c->Instance->DR; + hi2c->XferSize--; + hi2c->XferCount--; + + if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BTF) == SET) + { + /* Read data from DR */ + (*hi2c->pBuffPtr++) = hi2c->Instance->DR; + hi2c->XferSize--; + hi2c->XferCount--; + } + } + } + + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Write an amount of data in non-blocking mode with Interrupt to a specific memory address + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shift at right before call interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Mem_Write_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size) +{ + uint32_t tickstart = 0x00U; + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + /* Check the parameters */ + assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); + + if(hi2c->State == HAL_I2C_STATE_READY) + { + if((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Wait until BUSY flag is reset */ + if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG, tickstart) != HAL_OK) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Check if the I2C is already enabled */ + if((hi2c->Instance->CR1 & I2C_CR1_PE) != I2C_CR1_PE) + { + /* Enable I2C peripheral */ + __HAL_I2C_ENABLE(hi2c); + } + + /* Disable Pos */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_POS); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MEM; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferSize = hi2c->XferCount; + + /* Send Slave Address and Memory Address */ + if(I2C_RequestMemoryWrite(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG, tickstart) != HAL_OK) + { + if(hi2c->ErrorCode == HAL_I2C_ERROR_AF) + { + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_ERROR; + } + else + { + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_TIMEOUT; + } + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable EVT, BUF and ERR interrupt */ + __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Read an amount of data in non-blocking mode with Interrupt from a specific memory address + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shift at right before call interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Mem_Read_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size) +{ + uint32_t tickstart = 0x00U; + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + /* Check the parameters */ + assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); + + if(hi2c->State == HAL_I2C_STATE_READY) + { + if((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Wait until BUSY flag is reset */ + if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG, tickstart) != HAL_OK) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Check if the I2C is already enabled */ + if((hi2c->Instance->CR1 & I2C_CR1_PE) != I2C_CR1_PE) + { + /* Enable I2C peripheral */ + __HAL_I2C_ENABLE(hi2c); + } + + /* Disable Pos */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_POS); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MEM; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferSize = hi2c->XferCount; + + /* Send Slave Address and Memory Address */ + if(I2C_RequestMemoryRead(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG, tickstart) != HAL_OK) + { + if(hi2c->ErrorCode == HAL_I2C_ERROR_AF) + { + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_ERROR; + } + else + { + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_TIMEOUT; + } + } + + if(hi2c->XferCount == 1U) + { + /* Disable Acknowledge */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + + /* Generate Stop */ + SET_BIT(hi2c->Instance->CR1,I2C_CR1_STOP); + } + else if(hi2c->XferCount == 2U) + { + /* Disable Acknowledge */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + + /* Enable Pos */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_POS); + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + } + else + { + /* Enable Acknowledge */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable EVT, BUF and ERR interrupt */ + __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Write an amount of data in non-blocking mode with DMA to a specific memory address + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shift at right before call interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Mem_Write_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size) +{ + uint32_t tickstart = 0x00U; + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + /* Check the parameters */ + assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); + + if(hi2c->State == HAL_I2C_STATE_READY) + { + if((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Wait until BUSY flag is reset */ + if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG, tickstart) != HAL_OK) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Check if the I2C is already enabled */ + if((hi2c->Instance->CR1 & I2C_CR1_PE) != I2C_CR1_PE) + { + /* Enable I2C peripheral */ + __HAL_I2C_ENABLE(hi2c); + } + + /* Disable Pos */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_POS); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MEM; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferSize = hi2c->XferCount; + + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmatx->XferCpltCallback = I2C_DMAXferCplt; + + /* Set the DMA error callback */ + hi2c->hdmatx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmatx->XferHalfCpltCallback = NULL; + hi2c->hdmatx->XferAbortCallback = NULL; + + /* Enable the DMA Channel */ + HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)hi2c->pBuffPtr, (uint32_t)&hi2c->Instance->DR, hi2c->XferSize); + + /* Send Slave Address and Memory Address */ + if(I2C_RequestMemoryWrite(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG, tickstart) != HAL_OK) + { + if(hi2c->ErrorCode == HAL_I2C_ERROR_AF) + { + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_ERROR; + } + else + { + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_TIMEOUT; + } + } + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR interrupt */ + __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_ERR); + + /* Enable DMA Request */ + SET_BIT(hi2c->Instance->CR2, I2C_CR2_DMAEN); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Reads an amount of data in non-blocking mode with DMA from a specific memory address. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shift at right before call interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param pData Pointer to data buffer + * @param Size Amount of data to be read + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Mem_Read_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size) +{ + uint32_t tickstart = 0x00U; + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + /* Check the parameters */ + assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); + + if(hi2c->State == HAL_I2C_STATE_READY) + { + if((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Wait until BUSY flag is reset */ + if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG, tickstart) != HAL_OK) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Check if the I2C is already enabled */ + if((hi2c->Instance->CR1 & I2C_CR1_PE) != I2C_CR1_PE) + { + /* Enable I2C peripheral */ + __HAL_I2C_ENABLE(hi2c); + } + + /* Disable Pos */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_POS); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MEM; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferSize = hi2c->XferCount; + + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmarx->XferCpltCallback = I2C_DMAXferCplt; + + /* Set the DMA error callback */ + hi2c->hdmarx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmarx->XferHalfCpltCallback = NULL; + hi2c->hdmarx->XferAbortCallback = NULL; + + /* Enable the DMA Channel */ + HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->DR, (uint32_t)hi2c->pBuffPtr, hi2c->XferSize); + + /* Send Slave Address and Memory Address */ + if(I2C_RequestMemoryRead(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG, tickstart) != HAL_OK) + { + if(hi2c->ErrorCode == HAL_I2C_ERROR_AF) + { + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_ERROR; + } + else + { + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_TIMEOUT; + } + } + + if(Size == 1U) + { + /* Disable Acknowledge */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + } + else + { + /* Enable Last DMA bit */ + SET_BIT(hi2c->Instance->CR2, I2C_CR2_LAST); + } + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR interrupt */ + __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_ERR); + + /* Enable DMA Request */ + SET_BIT(hi2c->Instance->CR2, I2C_CR2_DMAEN); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Checks if target device is ready for communication. + * @note This function is used with Memory devices + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shift at right before call interface + * @param Trials Number of trials + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_IsDeviceReady(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Trials, uint32_t Timeout) +{ + uint32_t tickstart = 0U, I2C_Trials = 1U; + + /* Get tick */ + tickstart = HAL_GetTick(); + + if(hi2c->State == HAL_I2C_STATE_READY) + { + /* Wait until BUSY flag is reset */ + if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG, tickstart) != HAL_OK) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Check if the I2C is already enabled */ + if((hi2c->Instance->CR1 & I2C_CR1_PE) != I2C_CR1_PE) + { + /* Enable I2C peripheral */ + __HAL_I2C_ENABLE(hi2c); + } + + /* Disable Pos */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_POS); + + hi2c->State = HAL_I2C_STATE_BUSY; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + + do + { + /* Generate Start */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_START); + + /* Wait until SB flag is set */ + if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_SB, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_TIMEOUT; + } + + /* Send slave address */ + hi2c->Instance->DR = I2C_7BIT_ADD_WRITE(DevAddress); + + /* Wait until ADDR or AF flag are set */ + /* Get tick */ + tickstart = HAL_GetTick(); + + while((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_ADDR) == RESET) && \ + (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) == RESET) && \ + (hi2c->State != HAL_I2C_STATE_TIMEOUT)) + { + if(Timeout != HAL_MAX_DELAY) + { + if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout)) + { + hi2c->State = HAL_I2C_STATE_TIMEOUT; + } + } + } + + hi2c->State = HAL_I2C_STATE_READY; + + /* Check if the ADDR flag has been set */ + if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_ADDR) == SET) + { + /* Generate Stop */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_STOP); + + /* Clear ADDR Flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + + /* Wait until BUSY flag is reset */ + if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG, tickstart) != HAL_OK) + { + return HAL_TIMEOUT; + } + + hi2c->State = HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + /* Generate Stop */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_STOP); + + /* Clear AF Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Wait until BUSY flag is reset */ + if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG, tickstart) != HAL_OK) + { + return HAL_TIMEOUT; + } + } + }while(I2C_Trials++ < Trials); + + hi2c->State = HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief This function handles I2C event interrupt request. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +void HAL_I2C_EV_IRQHandler(I2C_HandleTypeDef *hi2c) +{ + uint32_t sr2itflags = READ_REG(hi2c->Instance->SR2); + uint32_t sr1itflags = READ_REG(hi2c->Instance->SR1); + uint32_t itsources = READ_REG(hi2c->Instance->CR2); + + /* Master or Memory mode selected */ + if((hi2c->Mode == HAL_I2C_MODE_MASTER) || \ + (hi2c->Mode == HAL_I2C_MODE_MEM)) + { + /* SB Set ----------------------------------------------------------------*/ + if(((sr1itflags & I2C_FLAG_SB) != RESET) && ((itsources & I2C_IT_EVT) != RESET)) + { + I2C_Master_SB(hi2c); + } + /* ADD10 Set -------------------------------------------------------------*/ + else if(((sr1itflags & I2C_FLAG_ADD10) != RESET) && ((itsources & I2C_IT_EVT) != RESET)) + { + I2C_Master_ADD10(hi2c); + } + /* ADDR Set --------------------------------------------------------------*/ + else if(((sr1itflags & I2C_FLAG_ADDR) != RESET) && ((itsources & I2C_IT_EVT) != RESET)) + { + I2C_Master_ADDR(hi2c); + } + + /* I2C in mode Transmitter -----------------------------------------------*/ + if((hi2c->EventCount == 0U) && ((sr2itflags & I2C_FLAG_TRA) != RESET)) + { + /* TXE set and BTF reset -----------------------------------------------*/ + if(((sr1itflags & I2C_FLAG_TXE) != RESET) && ((itsources & I2C_IT_BUF) != RESET) && ((sr1itflags & I2C_FLAG_BTF) == RESET)) + { + I2C_MasterTransmit_TXE(hi2c); + } + /* BTF set -------------------------------------------------------------*/ + else if(((sr1itflags & I2C_FLAG_BTF) != RESET) && ((itsources & I2C_IT_EVT) != RESET)) + { + I2C_MasterTransmit_BTF(hi2c); + } + } + /* I2C in mode Receiver --------------------------------------------------*/ + else + { + /* RXNE set and BTF reset -----------------------------------------------*/ + if(((sr1itflags & I2C_FLAG_RXNE) != RESET) && ((itsources & I2C_IT_BUF) != RESET) && ((sr1itflags & I2C_FLAG_BTF) == RESET)) + { + I2C_MasterReceive_RXNE(hi2c); + } + /* BTF set -------------------------------------------------------------*/ + else if(((sr1itflags & I2C_FLAG_BTF) != RESET) && ((itsources & I2C_IT_EVT) != RESET)) + { + I2C_MasterReceive_BTF(hi2c); + } + } + } + /* Slave mode selected */ + else + { + /* ADDR set --------------------------------------------------------------*/ + if(((sr1itflags & I2C_FLAG_ADDR) != RESET) && ((itsources & I2C_IT_EVT) != RESET)) + { + I2C_Slave_ADDR(hi2c); + } + /* STOPF set --------------------------------------------------------------*/ + else if(((sr1itflags & I2C_FLAG_STOPF) != RESET) && ((itsources & I2C_IT_EVT) != RESET)) + { + I2C_Slave_STOPF(hi2c); + } + /* I2C in mode Transmitter -----------------------------------------------*/ + else if((sr2itflags & I2C_FLAG_TRA) != RESET) + { + /* TXE set and BTF reset -----------------------------------------------*/ + if(((sr1itflags & I2C_FLAG_TXE) != RESET) && ((itsources & I2C_IT_BUF) != RESET) && ((sr1itflags & I2C_FLAG_BTF) == RESET)) + { + I2C_SlaveTransmit_TXE(hi2c); + } + /* BTF set -------------------------------------------------------------*/ + else if(((sr1itflags & I2C_FLAG_BTF) != RESET) && ((itsources & I2C_IT_EVT) != RESET)) + { + I2C_SlaveTransmit_BTF(hi2c); + } + } + /* I2C in mode Receiver --------------------------------------------------*/ + else + { + /* RXNE set and BTF reset ----------------------------------------------*/ + if(((sr1itflags & I2C_FLAG_RXNE) != RESET) && ((itsources & I2C_IT_BUF) != RESET) && ((sr1itflags & I2C_FLAG_BTF) == RESET)) + { + I2C_SlaveReceive_RXNE(hi2c); + } + /* BTF set -------------------------------------------------------------*/ + else if(((sr1itflags & I2C_FLAG_BTF) != RESET) && ((itsources & I2C_IT_EVT) != RESET)) + { + I2C_SlaveReceive_BTF(hi2c); + } + } + } +} + +/** + * @brief This function handles I2C error interrupt request. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +void HAL_I2C_ER_IRQHandler(I2C_HandleTypeDef *hi2c) +{ + uint32_t sr1itflags = READ_REG(hi2c->Instance->SR1); + uint32_t itsources = READ_REG(hi2c->Instance->CR2); + + /* I2C Bus error interrupt occurred ----------------------------------------*/ + if(((sr1itflags & I2C_FLAG_BERR) != RESET) && ((itsources & I2C_IT_ERR) != RESET)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_BERR; + + /* Clear BERR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_BERR); + } + + /* I2C Arbitration Loss error interrupt occurred ---------------------------*/ + if(((sr1itflags & I2C_FLAG_ARLO) != RESET) && ((itsources & I2C_IT_ERR) != RESET)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_ARLO; + + /* Clear ARLO flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ARLO); + } + + /* I2C Acknowledge failure error interrupt occurred ------------------------*/ + if(((sr1itflags & I2C_FLAG_AF) != RESET) && ((itsources & I2C_IT_ERR) != RESET)) + { + if((hi2c->Mode == HAL_I2C_MODE_SLAVE) && \ + (hi2c->XferCount == 0U) && \ + ((hi2c->State == HAL_I2C_STATE_BUSY_TX) || (hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) || \ + ((hi2c->State == HAL_I2C_STATE_LISTEN) && (hi2c->PreviousState == HAL_I2C_STATE_BUSY_TX)))) + { + I2C_Slave_AF(hi2c); + } + else + { + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + + /* Do not generate a STOP in case of Slave receive non acknowledge during transfer (mean not at the end of transfer) */ + if(hi2c->Mode == HAL_I2C_MODE_MASTER) + { + /* Generate Stop */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_STOP); + } + + /* Clear AF flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + } + } + + /* I2C Over-Run/Under-Run interrupt occurred -------------------------------*/ + if(((sr1itflags & I2C_FLAG_OVR) != RESET) && ((itsources & I2C_IT_ERR) != RESET)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_OVR; + /* Clear OVR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_OVR); + } + + /* Call the Error Callback in case of Error detected -----------------------*/ + if(hi2c->ErrorCode != HAL_I2C_ERROR_NONE) + { + I2C_ITError(hi2c); + } +} + +/** + * @brief Master Tx Transfer completed callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ + __weak void HAL_I2C_MasterTxCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_MasterTxCpltCallback can be implemented in the user file + */ +} + +/** + * @brief Master Rx Transfer completed callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_MasterRxCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_MasterRxCpltCallback can be implemented in the user file + */ +} + +/** @brief Slave Tx Transfer completed callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ + __weak void HAL_I2C_SlaveTxCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_SlaveTxCpltCallback can be implemented in the user file + */ +} + +/** + * @brief Slave Rx Transfer completed callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_SlaveRxCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_SlaveRxCpltCallback can be implemented in the user file + */ +} + +/** + * @brief Slave Address Match callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param TransferDirection Master request Transfer Direction (Write/Read), value of @ref I2C_XferDirection_definition + * @param AddrMatchCode Address Match Code + * @retval None + */ +__weak void HAL_I2C_AddrCallback(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + UNUSED(TransferDirection); + UNUSED(AddrMatchCode); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_AddrCallback can be implemented in the user file + */ +} + +/** + * @brief Listen Complete callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_ListenCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_ListenCpltCallback can be implemented in the user file + */ +} + +/** + * @brief Memory Tx Transfer completed callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ + __weak void HAL_I2C_MemTxCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_MemTxCpltCallback can be implemented in the user file + */ +} + +/** + * @brief Memory Rx Transfer completed callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_MemRxCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_MemRxCpltCallback can be implemented in the user file + */ +} + +/** + * @brief I2C error callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ + __weak void HAL_I2C_ErrorCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_ErrorCallback can be implemented in the user file + */ +} + +/** + * @brief I2C abort callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_AbortCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_AbortCpltCallback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup I2C_Exported_Functions_Group3 Peripheral State, Mode and Error functions + * @brief Peripheral State and Errors functions + * +@verbatim + =============================================================================== + ##### Peripheral State, Mode and Error functions ##### + =============================================================================== + [..] + This subsection permits to get in run-time the status of the peripheral + and the data flow. + +@endverbatim + * @{ + */ + +/** + * @brief Return the I2C handle state. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval HAL state + */ +HAL_I2C_StateTypeDef HAL_I2C_GetState(I2C_HandleTypeDef *hi2c) +{ + /* Return I2C handle state */ + return hi2c->State; +} + +/** + * @brief Return the I2C Master, Slave, Memory or no mode. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @retval HAL mode + */ +HAL_I2C_ModeTypeDef HAL_I2C_GetMode(I2C_HandleTypeDef *hi2c) +{ + return hi2c->Mode; +} + +/** +* @brief Return the I2C error code. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval I2C Error Code +*/ +uint32_t HAL_I2C_GetError(I2C_HandleTypeDef *hi2c) +{ + return hi2c->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + + +/** @addtogroup I2C_Private_Functions + * @{ + */ + + +/** + * @brief Handle TXE flag for Master + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_MasterTransmit_TXE(I2C_HandleTypeDef *hi2c) +{ + if((hi2c->XferSize == 0U) && (hi2c->State == HAL_I2C_STATE_BUSY_TX)) + { + /* Call TxCpltCallback() directly if no stop mode is set */ + if((hi2c->XferOptions != I2C_FIRST_AND_LAST_FRAME) && (hi2c->XferOptions != I2C_LAST_FRAME) && (hi2c->XferOptions != I2C_NO_OPTION_FRAME)) + { + __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR); + + hi2c->PreviousState = I2C_STATE_MASTER_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_NONE; + hi2c->State = HAL_I2C_STATE_READY; + + HAL_I2C_MasterTxCpltCallback(hi2c); + } + else /* Generate Stop condition then Call TxCpltCallback() */ + { + /* Disable EVT, BUF and ERR interrupt */ + __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR); + + /* Generate Stop */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_STOP); + + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->State = HAL_I2C_STATE_READY; + + if(hi2c->Mode == HAL_I2C_MODE_MEM) + { + hi2c->Mode = HAL_I2C_MODE_NONE; + HAL_I2C_MemTxCpltCallback(hi2c); + } + else + { + hi2c->Mode = HAL_I2C_MODE_NONE; + HAL_I2C_MasterTxCpltCallback(hi2c); + } + } + } + else if((hi2c->State == HAL_I2C_STATE_BUSY_TX) || \ + ((hi2c->Mode == HAL_I2C_MODE_MEM) && (hi2c->State == HAL_I2C_STATE_BUSY_RX))) + { + if(hi2c->XferCount == 0U) + { + /* Disable BUF interrupt */ + __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_BUF); + } + else + { + /* Write data to DR */ + hi2c->Instance->DR = (*hi2c->pBuffPtr++); + hi2c->XferCount--; + } + } + return HAL_OK; +} + +/** + * @brief Handle BTF flag for Master transmitter + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_MasterTransmit_BTF(I2C_HandleTypeDef *hi2c) +{ + if(hi2c->State == HAL_I2C_STATE_BUSY_TX) + { + if(hi2c->XferCount != 0U) + { + /* Write data to DR */ + hi2c->Instance->DR = (*hi2c->pBuffPtr++); + hi2c->XferCount--; + } + else + { + /* Call TxCpltCallback() directly if no stop mode is set */ + if((hi2c->XferOptions != I2C_FIRST_AND_LAST_FRAME) && (hi2c->XferOptions != I2C_LAST_FRAME) && (hi2c->XferOptions != I2C_NO_OPTION_FRAME)) + { + __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR); + + hi2c->PreviousState = I2C_STATE_MASTER_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_NONE; + hi2c->State = HAL_I2C_STATE_READY; + + HAL_I2C_MasterTxCpltCallback(hi2c); + } + else /* Generate Stop condition then Call TxCpltCallback() */ + { + /* Disable EVT, BUF and ERR interrupt */ + __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR); + + /* Generate Stop */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_STOP); + + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->State = HAL_I2C_STATE_READY; + + if(hi2c->Mode == HAL_I2C_MODE_MEM) + { + hi2c->Mode = HAL_I2C_MODE_NONE; + + HAL_I2C_MemTxCpltCallback(hi2c); + } + else + { + hi2c->Mode = HAL_I2C_MODE_NONE; + + HAL_I2C_MasterTxCpltCallback(hi2c); + } + } + } + } + return HAL_OK; +} + +/** + * @brief Handle RXNE flag for Master + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_MasterReceive_RXNE(I2C_HandleTypeDef *hi2c) +{ + if(hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + if(hi2c->XferCount > 3U) + { + /* Read data from DR */ + (*hi2c->pBuffPtr++) = hi2c->Instance->DR; + hi2c->XferCount--; + } + else if((hi2c->XferCount == 2U) || (hi2c->XferCount == 3U)) + { + if(hi2c->XferOptions != I2C_NEXT_FRAME) + { + /* Disable Acknowledge */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + + /* Enable Pos */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_POS); + } + else + { + /* Enable Acknowledge */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + } + + /* Disable BUF interrupt */ + __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_BUF); + } + else + { + if(hi2c->XferOptions != I2C_NEXT_FRAME) + { + /* Disable Acknowledge */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + } + else + { + /* Enable Acknowledge */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + } + + /* Disable EVT, BUF and ERR interrupt */ + __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR); + + /* Read data from DR */ + (*hi2c->pBuffPtr++) = hi2c->Instance->DR; + hi2c->XferCount--; + + hi2c->State = HAL_I2C_STATE_READY; + + if(hi2c->Mode == HAL_I2C_MODE_MEM) + { + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->Mode = HAL_I2C_MODE_NONE; + HAL_I2C_MemRxCpltCallback(hi2c); + } + else + { + hi2c->PreviousState = I2C_STATE_MASTER_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_NONE; + HAL_I2C_MasterRxCpltCallback(hi2c); + } + } + } + return HAL_OK; +} + +/** + * @brief Handle BTF flag for Master receiver + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_MasterReceive_BTF(I2C_HandleTypeDef *hi2c) +{ + if(hi2c->XferCount == 3U) + { + if((hi2c->XferOptions == I2C_FIRST_AND_LAST_FRAME) || (hi2c->XferOptions == I2C_LAST_FRAME) || (hi2c->XferOptions == I2C_NO_OPTION_FRAME)) + { + /* Disable Acknowledge */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + } + + /* Read data from DR */ + (*hi2c->pBuffPtr++) = hi2c->Instance->DR; + hi2c->XferCount--; + } + else if(hi2c->XferCount == 2U) + { + /* Prepare next transfer or stop current transfer */ + if((hi2c->XferOptions != I2C_FIRST_AND_LAST_FRAME) && (hi2c->XferOptions != I2C_LAST_FRAME) && (hi2c->XferOptions != I2C_NO_OPTION_FRAME)) + { + if(hi2c->XferOptions != I2C_NEXT_FRAME) + { + /* Disable Acknowledge */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + } + else + { + /* Enable Acknowledge */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + } + } + else + { + /* Generate Stop */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_STOP); + } + + /* Read data from DR */ + (*hi2c->pBuffPtr++) = hi2c->Instance->DR; + hi2c->XferCount--; + + /* Read data from DR */ + (*hi2c->pBuffPtr++) = hi2c->Instance->DR; + hi2c->XferCount--; + + /* Disable EVT and ERR interrupt */ + __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_ERR); + + hi2c->State = HAL_I2C_STATE_READY; + + if(hi2c->Mode == HAL_I2C_MODE_MEM) + { + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->Mode = HAL_I2C_MODE_NONE; + HAL_I2C_MemRxCpltCallback(hi2c); + } + else + { + hi2c->PreviousState = I2C_STATE_MASTER_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_NONE; + HAL_I2C_MasterRxCpltCallback(hi2c); + } + } + else + { + /* Read data from DR */ + (*hi2c->pBuffPtr++) = hi2c->Instance->DR; + hi2c->XferCount--; + } + return HAL_OK; +} + +/** + * @brief Handle SB flag for Master + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_Master_SB(I2C_HandleTypeDef *hi2c) +{ + if(hi2c->Mode == HAL_I2C_MODE_MEM) + { + if(hi2c->EventCount == 0U) + { + /* Send slave address */ + hi2c->Instance->DR = I2C_7BIT_ADD_WRITE(hi2c->Devaddress); + } + else + { + hi2c->Instance->DR = I2C_7BIT_ADD_READ(hi2c->Devaddress); + } + } + else + { + if(hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_7BIT) + { + /* Send slave 7 Bits address */ + if(hi2c->State == HAL_I2C_STATE_BUSY_TX) + { + hi2c->Instance->DR = I2C_7BIT_ADD_WRITE(hi2c->Devaddress); + } + else + { + hi2c->Instance->DR = I2C_7BIT_ADD_READ(hi2c->Devaddress); + } + } + else + { + if(hi2c->EventCount == 0U) + { + /* Send header of slave address */ + hi2c->Instance->DR = I2C_10BIT_HEADER_WRITE(hi2c->Devaddress); + } + else if(hi2c->EventCount == 1U) + { + /* Send header of slave address */ + hi2c->Instance->DR = I2C_10BIT_HEADER_READ(hi2c->Devaddress); + } + } + } + + return HAL_OK; +} + +/** + * @brief Handle ADD10 flag for Master + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_Master_ADD10(I2C_HandleTypeDef *hi2c) +{ + /* Send slave address */ + hi2c->Instance->DR = I2C_10BIT_ADDRESS(hi2c->Devaddress); + + return HAL_OK; +} + +/** + * @brief Handle ADDR flag for Master + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_Master_ADDR(I2C_HandleTypeDef *hi2c) +{ + if(hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + if((hi2c->EventCount == 0U) && (hi2c->Mode == HAL_I2C_MODE_MEM)) + { + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + } + else if((hi2c->EventCount == 0U) && (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_10BIT)) + { + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + + /* Generate Restart */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_START); + + hi2c->EventCount++; + } + else + { + if(hi2c->XferCount == 0U) + { + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + + /* Generate Stop */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_STOP); + } + else if(hi2c->XferCount == 1U) + { + if(hi2c->XferOptions == I2C_NO_OPTION_FRAME) + { + /* Disable Acknowledge */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + + if((hi2c->Instance->CR2 & I2C_CR2_DMAEN) == I2C_CR2_DMAEN) + { + /* Disable Acknowledge */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + } + else + { + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + + /* Generate Stop */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_STOP); + } + } + /* Prepare next transfer or stop current transfer */ + else if((hi2c->XferOptions != I2C_FIRST_AND_LAST_FRAME) && (hi2c->XferOptions != I2C_LAST_FRAME) \ + && (hi2c->PreviousState != I2C_STATE_MASTER_BUSY_RX)) + { + if(hi2c->XferOptions != I2C_NEXT_FRAME) + { + /* Disable Acknowledge */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + } + else + { + /* Enable Acknowledge */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + } + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + } + else + { + /* Disable Acknowledge */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + + /* Generate Stop */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_STOP); + } + } + else if(hi2c->XferCount == 2U) + { + if(hi2c->XferOptions != I2C_NEXT_FRAME) + { + /* Disable Acknowledge */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + + /* Enable Pos */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_POS); + } + else + { + /* Enable Acknowledge */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + } + + if((hi2c->Instance->CR2 & I2C_CR2_DMAEN) == I2C_CR2_DMAEN) + { + /* Enable Last DMA bit */ + SET_BIT(hi2c->Instance->CR2, I2C_CR2_LAST); + } + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + } + else + { + /* Enable Acknowledge */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + + if((hi2c->Instance->CR2 & I2C_CR2_DMAEN) == I2C_CR2_DMAEN) + { + /* Enable Last DMA bit */ + SET_BIT(hi2c->Instance->CR2, I2C_CR2_LAST); + } + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + } + + /* Reset Event counter */ + hi2c->EventCount = 0U; + } + } + else + { + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + } + + return HAL_OK; +} + +/** + * @brief Handle TXE flag for Slave + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_SlaveTransmit_TXE(I2C_HandleTypeDef *hi2c) +{ + if(hi2c->XferCount != 0U) + { + /* Write data to DR */ + hi2c->Instance->DR = (*hi2c->pBuffPtr++); + hi2c->XferCount--; + + if((hi2c->XferCount == 0U) && (hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN)) + { + /* Last Byte is received, disable Interrupt */ + __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_BUF); + + /* Set state at HAL_I2C_STATE_LISTEN */ + hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_TX; + hi2c->State = HAL_I2C_STATE_LISTEN; + + /* Call the Tx complete callback to inform upper layer of the end of receive process */ + HAL_I2C_SlaveTxCpltCallback(hi2c); + } + } + return HAL_OK; +} + +/** + * @brief Handle BTF flag for Slave transmitter + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_SlaveTransmit_BTF(I2C_HandleTypeDef *hi2c) +{ + if(hi2c->XferCount != 0U) + { + /* Write data to DR */ + hi2c->Instance->DR = (*hi2c->pBuffPtr++); + hi2c->XferCount--; + } + return HAL_OK; +} + +/** + * @brief Handle RXNE flag for Slave + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_SlaveReceive_RXNE(I2C_HandleTypeDef *hi2c) +{ + if(hi2c->XferCount != 0U) + { + /* Read data from DR */ + (*hi2c->pBuffPtr++) = hi2c->Instance->DR; + hi2c->XferCount--; + + if((hi2c->XferCount == 0U) && (hi2c->State == HAL_I2C_STATE_BUSY_RX_LISTEN)) + { + /* Last Byte is received, disable Interrupt */ + __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_BUF); + + /* Set state at HAL_I2C_STATE_LISTEN */ + hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_RX; + hi2c->State = HAL_I2C_STATE_LISTEN; + + /* Call the Rx complete callback to inform upper layer of the end of receive process */ + HAL_I2C_SlaveRxCpltCallback(hi2c); + } + } + return HAL_OK; +} + +/** + * @brief Handle BTF flag for Slave receiver + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_SlaveReceive_BTF(I2C_HandleTypeDef *hi2c) +{ + if(hi2c->XferCount != 0U) + { + /* Read data from DR */ + (*hi2c->pBuffPtr++) = hi2c->Instance->DR; + hi2c->XferCount--; + } + return HAL_OK; +} + +/** + * @brief Handle ADD flag for Slave + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_Slave_ADDR(I2C_HandleTypeDef *hi2c) +{ + uint8_t TransferDirection = I2C_DIRECTION_RECEIVE; + uint16_t SlaveAddrCode = 0U; + + /* Transfer Direction requested by Master */ + if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TRA) == RESET) + { + TransferDirection = I2C_DIRECTION_TRANSMIT; + } + + if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_DUALF) == RESET) + { + SlaveAddrCode = hi2c->Init.OwnAddress1; + } + else + { + SlaveAddrCode = hi2c->Init.OwnAddress2; + } + + /* Call Slave Addr callback */ + HAL_I2C_AddrCallback(hi2c, TransferDirection, SlaveAddrCode); + + return HAL_OK; +} + +/** + * @brief Handle STOPF flag for Slave + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_Slave_STOPF(I2C_HandleTypeDef *hi2c) +{ + /* Disable EVT, BUF and ERR interrupt */ + __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR); + + /* Clear STOPF flag */ + __HAL_I2C_CLEAR_STOPFLAG(hi2c); + + /* Disable Acknowledge */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + + /* If a DMA is ongoing, Update handle size context */ + if((hi2c->Instance->CR2 & I2C_CR2_DMAEN) == I2C_CR2_DMAEN) + { + if((hi2c->State == HAL_I2C_STATE_BUSY_RX) || (hi2c->State == HAL_I2C_STATE_BUSY_RX_LISTEN)) + { + hi2c->XferCount = __HAL_DMA_GET_COUNTER(hi2c->hdmarx); + } + else + { + hi2c->XferCount = __HAL_DMA_GET_COUNTER(hi2c->hdmatx); + } + } + + /* All data are not transferred, so set error code accordingly */ + if(hi2c->XferCount != 0U) + { + /* Store Last receive data if any */ + if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BTF) == SET) + { + /* Read data from DR */ + (*hi2c->pBuffPtr++) = hi2c->Instance->DR; + hi2c->XferCount--; + } + + /* Store Last receive data if any */ + if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == SET) + { + /* Read data from DR */ + (*hi2c->pBuffPtr++) = hi2c->Instance->DR; + hi2c->XferCount--; + } + + /* Set ErrorCode corresponding to a Non-Acknowledge */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + } + + if(hi2c->ErrorCode != HAL_I2C_ERROR_NONE) + { + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c); + } + else + { + if((hi2c->State == HAL_I2C_STATE_LISTEN ) || (hi2c->State == HAL_I2C_STATE_BUSY_RX_LISTEN) || \ + (hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN)) + { + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Call the Listen Complete callback, to inform upper layer of the end of Listen usecase */ + HAL_I2C_ListenCpltCallback(hi2c); + } + else + { + if((hi2c->PreviousState == I2C_STATE_SLAVE_BUSY_RX) || (hi2c->State == HAL_I2C_STATE_BUSY_RX)) + { + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + HAL_I2C_SlaveRxCpltCallback(hi2c); + } + } + } + return HAL_OK; +} + +/** + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_Slave_AF(I2C_HandleTypeDef *hi2c) +{ + if(((hi2c->XferOptions == I2C_FIRST_AND_LAST_FRAME) || (hi2c->XferOptions == I2C_LAST_FRAME)) && \ + (hi2c->State == HAL_I2C_STATE_LISTEN)) + { + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + + /* Disable EVT, BUF and ERR interrupt */ + __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR); + + /* Clear AF flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Disable Acknowledge */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Call the Listen Complete callback, to inform upper layer of the end of Listen usecase */ + HAL_I2C_ListenCpltCallback(hi2c); + } + else if(hi2c->State == HAL_I2C_STATE_BUSY_TX) + { + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_TX; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Disable EVT, BUF and ERR interrupt */ + __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR); + + /* Clear AF flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Disable Acknowledge */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + + HAL_I2C_SlaveTxCpltCallback(hi2c); + } + else + { + /* Clear AF flag only */ + /* State Listen, but XferOptions == FIRST or NEXT */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + } + + return HAL_OK; +} + +/** + * @brief I2C interrupts error process + * @param hi2c I2C handle. + * @retval None + */ +static void I2C_ITError(I2C_HandleTypeDef *hi2c) +{ + /* Declaration of temporary variable to prevent undefined behavior of volatile usage */ + uint32_t CurrentState = hi2c->State; + + if((CurrentState == HAL_I2C_STATE_BUSY_TX_LISTEN) || (CurrentState == HAL_I2C_STATE_BUSY_RX_LISTEN)) + { + /* keep HAL_I2C_STATE_LISTEN */ + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->State = HAL_I2C_STATE_LISTEN; + } + else + { + /* If state is an abort treatment on going, don't change state */ + /* This change will be do later */ + if((hi2c->State != HAL_I2C_STATE_ABORT) && ((hi2c->Instance->CR2 & I2C_CR2_DMAEN) != I2C_CR2_DMAEN)) + { + hi2c->State = HAL_I2C_STATE_READY; + } + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->Mode = HAL_I2C_MODE_NONE; + } + + /* Disable Pos bit in I2C CR1 when error occurred in Master/Mem Receive IT Process */ + hi2c->Instance->CR1 &= ~I2C_CR1_POS; + + /* Abort DMA transfer */ + if((hi2c->Instance->CR2 & I2C_CR2_DMAEN) == I2C_CR2_DMAEN) + { + hi2c->Instance->CR2 &= ~I2C_CR2_DMAEN; + + if(hi2c->hdmatx->State != HAL_DMA_STATE_READY) + { + /* Set the DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmatx->XferAbortCallback = I2C_DMAAbort; + + if(HAL_DMA_Abort_IT(hi2c->hdmatx) != HAL_OK) + { + /* Disable I2C peripheral to prevent dummy data in buffer */ + __HAL_I2C_DISABLE(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + + /* Call Directly XferAbortCallback function in case of error */ + hi2c->hdmatx->XferAbortCallback(hi2c->hdmatx); + } + } + else + { + /* Set the DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmarx->XferAbortCallback = I2C_DMAAbort; + + if(HAL_DMA_Abort_IT(hi2c->hdmarx) != HAL_OK) + { + /* Store Last receive data if any */ + if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == SET) + { + /* Read data from DR */ + (*hi2c->pBuffPtr++) = hi2c->Instance->DR; + } + + /* Disable I2C peripheral to prevent dummy data in buffer */ + __HAL_I2C_DISABLE(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + + /* Call Directly hi2c->hdmarx->XferAbortCallback function in case of error */ + hi2c->hdmarx->XferAbortCallback(hi2c->hdmarx); + } + } + } + else if(hi2c->State == HAL_I2C_STATE_ABORT) + { + hi2c->State = HAL_I2C_STATE_READY; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Store Last receive data if any */ + if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == SET) + { + /* Read data from DR */ + (*hi2c->pBuffPtr++) = hi2c->Instance->DR; + } + + /* Disable I2C peripheral to prevent dummy data in buffer */ + __HAL_I2C_DISABLE(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ + HAL_I2C_AbortCpltCallback(hi2c); + } + else + { + /* Store Last receive data if any */ + if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == SET) + { + /* Read data from DR */ + (*hi2c->pBuffPtr++) = hi2c->Instance->DR; + } + + /* Call user error callback */ + HAL_I2C_ErrorCallback(hi2c); + } + /* STOP Flag is not set after a NACK reception */ + /* So may inform upper layer that listen phase is stopped */ + /* during NACK error treatment */ + if((hi2c->State == HAL_I2C_STATE_LISTEN) && ((hi2c->ErrorCode & HAL_I2C_ERROR_AF) == HAL_I2C_ERROR_AF)) + { + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Call the Listen Complete callback, to inform upper layer of the end of Listen usecase */ + HAL_I2C_ListenCpltCallback(hi2c); + } +} + +/** + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shift at right before call interface + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_MasterRequestWrite(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Timeout, uint32_t Tickstart) +{ + /* Generate Start condition if first transfer */ + if((hi2c->XferOptions == I2C_FIRST_AND_LAST_FRAME) || (hi2c->XferOptions == I2C_FIRST_FRAME) || (hi2c->XferOptions == I2C_NO_OPTION_FRAME)) + { + /* Generate Start */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_START); + } + else if(hi2c->PreviousState == I2C_STATE_MASTER_BUSY_RX) + { + /* Generate ReStart */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_START); + } + + /* Wait until SB flag is set */ + if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_SB, RESET, Timeout, Tickstart) != HAL_OK) + { + return HAL_TIMEOUT; + } + + if(hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_7BIT) + { + /* Send slave address */ + hi2c->Instance->DR = I2C_7BIT_ADD_WRITE(DevAddress); + } + else + { + /* Send header of slave address */ + hi2c->Instance->DR = I2C_10BIT_HEADER_WRITE(DevAddress); + + /* Wait until ADD10 flag is set */ + if(I2C_WaitOnMasterAddressFlagUntilTimeout(hi2c, I2C_FLAG_ADD10, Timeout, Tickstart) != HAL_OK) + { + if(hi2c->ErrorCode == HAL_I2C_ERROR_AF) + { + return HAL_ERROR; + } + else + { + return HAL_TIMEOUT; + } + } + + /* Send slave address */ + hi2c->Instance->DR = I2C_10BIT_ADDRESS(DevAddress); + } + + /* Wait until ADDR flag is set */ + if(I2C_WaitOnMasterAddressFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, Timeout, Tickstart) != HAL_OK) + { + if(hi2c->ErrorCode == HAL_I2C_ERROR_AF) + { + return HAL_ERROR; + } + else + { + return HAL_TIMEOUT; + } + } + + return HAL_OK; +} + +/** + * @brief Master sends target device address for read request. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shift at right before call interface + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_MasterRequestRead(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Timeout, uint32_t Tickstart) +{ + /* Enable Acknowledge */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + + /* Generate Start condition if first transfer */ + if((hi2c->XferOptions == I2C_FIRST_AND_LAST_FRAME) || (hi2c->XferOptions == I2C_FIRST_FRAME) || (hi2c->XferOptions == I2C_NO_OPTION_FRAME)) + { + /* Generate Start */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_START); + } + else if(hi2c->PreviousState == I2C_STATE_MASTER_BUSY_TX) + { + /* Generate ReStart */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_START); + } + + /* Wait until SB flag is set */ + if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_SB, RESET, Timeout, Tickstart) != HAL_OK) + { + return HAL_TIMEOUT; + } + + if(hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_7BIT) + { + /* Send slave address */ + hi2c->Instance->DR = I2C_7BIT_ADD_READ(DevAddress); + } + else + { + /* Send header of slave address */ + hi2c->Instance->DR = I2C_10BIT_HEADER_WRITE(DevAddress); + + /* Wait until ADD10 flag is set */ + if(I2C_WaitOnMasterAddressFlagUntilTimeout(hi2c, I2C_FLAG_ADD10, Timeout, Tickstart) != HAL_OK) + { + if(hi2c->ErrorCode == HAL_I2C_ERROR_AF) + { + return HAL_ERROR; + } + else + { + return HAL_TIMEOUT; + } + } + + /* Send slave address */ + hi2c->Instance->DR = I2C_10BIT_ADDRESS(DevAddress); + + /* Wait until ADDR flag is set */ + if(I2C_WaitOnMasterAddressFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, Timeout, Tickstart) != HAL_OK) + { + if(hi2c->ErrorCode == HAL_I2C_ERROR_AF) + { + return HAL_ERROR; + } + else + { + return HAL_TIMEOUT; + } + } + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + + /* Generate Restart */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_START); + + /* Wait until SB flag is set */ + if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_SB, RESET, Timeout, Tickstart) != HAL_OK) + { + return HAL_TIMEOUT; + } + + /* Send header of slave address */ + hi2c->Instance->DR = I2C_10BIT_HEADER_READ(DevAddress); + } + + /* Wait until ADDR flag is set */ + if(I2C_WaitOnMasterAddressFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, Timeout, Tickstart) != HAL_OK) + { + if(hi2c->ErrorCode == HAL_I2C_ERROR_AF) + { + return HAL_ERROR; + } + else + { + return HAL_TIMEOUT; + } + } + + return HAL_OK; +} + +/** + * @brief Master sends target device address followed by internal memory address for write request. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shift at right before call interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_RequestMemoryWrite(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, uint32_t Tickstart) +{ + /* Generate Start */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_START); + + /* Wait until SB flag is set */ + if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_SB, RESET, Timeout, Tickstart) != HAL_OK) + { + return HAL_TIMEOUT; + } + + /* Send slave address */ + hi2c->Instance->DR = I2C_7BIT_ADD_WRITE(DevAddress); + + /* Wait until ADDR flag is set */ + if(I2C_WaitOnMasterAddressFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, Timeout, Tickstart) != HAL_OK) + { + if(hi2c->ErrorCode == HAL_I2C_ERROR_AF) + { + return HAL_ERROR; + } + else + { + return HAL_TIMEOUT; + } + } + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + + /* Wait until TXE flag is set */ + if(I2C_WaitOnTXEFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK) + { + if(hi2c->ErrorCode == HAL_I2C_ERROR_AF) + { + /* Generate Stop */ + SET_BIT(hi2c->Instance->CR1,I2C_CR1_STOP); + return HAL_ERROR; + } + else + { + return HAL_TIMEOUT; + } + } + + /* If Memory address size is 8Bit */ + if(MemAddSize == I2C_MEMADD_SIZE_8BIT) + { + /* Send Memory Address */ + hi2c->Instance->DR = I2C_MEM_ADD_LSB(MemAddress); + } + /* If Memory address size is 16Bit */ + else + { + /* Send MSB of Memory Address */ + hi2c->Instance->DR = I2C_MEM_ADD_MSB(MemAddress); + + /* Wait until TXE flag is set */ + if(I2C_WaitOnTXEFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK) + { + if(hi2c->ErrorCode == HAL_I2C_ERROR_AF) + { + /* Generate Stop */ + SET_BIT(hi2c->Instance->CR1,I2C_CR1_STOP); + return HAL_ERROR; + } + else + { + return HAL_TIMEOUT; + } + } + + /* Send LSB of Memory Address */ + hi2c->Instance->DR = I2C_MEM_ADD_LSB(MemAddress); + } + + return HAL_OK; +} + +/** + * @brief Master sends target device address followed by internal memory address for read request. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shift at right before call interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_RequestMemoryRead(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, uint32_t Tickstart) +{ + /* Enable Acknowledge */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + + /* Generate Start */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_START); + + /* Wait until SB flag is set */ + if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_SB, RESET, Timeout, Tickstart) != HAL_OK) + { + return HAL_TIMEOUT; + } + + /* Send slave address */ + hi2c->Instance->DR = I2C_7BIT_ADD_WRITE(DevAddress); + + /* Wait until ADDR flag is set */ + if(I2C_WaitOnMasterAddressFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, Timeout, Tickstart) != HAL_OK) + { + if(hi2c->ErrorCode == HAL_I2C_ERROR_AF) + { + return HAL_ERROR; + } + else + { + return HAL_TIMEOUT; + } + } + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + + /* Wait until TXE flag is set */ + if(I2C_WaitOnTXEFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK) + { + if(hi2c->ErrorCode == HAL_I2C_ERROR_AF) + { + /* Generate Stop */ + SET_BIT(hi2c->Instance->CR1,I2C_CR1_STOP); + return HAL_ERROR; + } + else + { + return HAL_TIMEOUT; + } + } + + /* If Memory address size is 8Bit */ + if(MemAddSize == I2C_MEMADD_SIZE_8BIT) + { + /* Send Memory Address */ + hi2c->Instance->DR = I2C_MEM_ADD_LSB(MemAddress); + } + /* If Memory address size is 16Bit */ + else + { + /* Send MSB of Memory Address */ + hi2c->Instance->DR = I2C_MEM_ADD_MSB(MemAddress); + + /* Wait until TXE flag is set */ + if(I2C_WaitOnTXEFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK) + { + if(hi2c->ErrorCode == HAL_I2C_ERROR_AF) + { + /* Generate Stop */ + SET_BIT(hi2c->Instance->CR1,I2C_CR1_STOP); + return HAL_ERROR; + } + else + { + return HAL_TIMEOUT; + } + } + + /* Send LSB of Memory Address */ + hi2c->Instance->DR = I2C_MEM_ADD_LSB(MemAddress); + } + + /* Wait until TXE flag is set */ + if(I2C_WaitOnTXEFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK) + { + if(hi2c->ErrorCode == HAL_I2C_ERROR_AF) + { + /* Generate Stop */ + SET_BIT(hi2c->Instance->CR1,I2C_CR1_STOP); + return HAL_ERROR; + } + else + { + return HAL_TIMEOUT; + } + } + + /* Generate Restart */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_START); + + /* Wait until SB flag is set */ + if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_SB, RESET, Timeout, Tickstart) != HAL_OK) + { + return HAL_TIMEOUT; + } + + /* Send slave address */ + hi2c->Instance->DR = I2C_7BIT_ADD_READ(DevAddress); + + /* Wait until ADDR flag is set */ + if(I2C_WaitOnMasterAddressFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, Timeout, Tickstart) != HAL_OK) + { + if(hi2c->ErrorCode == HAL_I2C_ERROR_AF) + { + return HAL_ERROR; + } + else + { + return HAL_TIMEOUT; + } + } + + return HAL_OK; +} + +/** + * @brief DMA I2C process complete callback. + * @param hdma DMA handle + * @retval None + */ +static void I2C_DMAXferCplt(DMA_HandleTypeDef *hdma) +{ + I2C_HandleTypeDef* hi2c = (I2C_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent; + + if((hi2c->State == HAL_I2C_STATE_BUSY_TX) || ((hi2c->State == HAL_I2C_STATE_BUSY_RX) && (hi2c->Mode == HAL_I2C_MODE_SLAVE))) + { + /* Disable DMA Request */ + CLEAR_BIT(hi2c->Instance->CR2, I2C_CR2_DMAEN); + + hi2c->XferCount = 0U; + + /* Enable EVT and ERR interrupt */ + __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_ERR); + } + else + { + /* Disable Acknowledge */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + + /* Generate Stop */ + SET_BIT(hi2c->Instance->CR1,I2C_CR1_STOP); + + /* Disable Last DMA */ + CLEAR_BIT(hi2c->Instance->CR2, I2C_CR2_LAST); + + /* Disable DMA Request */ + CLEAR_BIT(hi2c->Instance->CR2, I2C_CR2_DMAEN); + + hi2c->XferCount = 0U; + + /* Check if Errors has been detected during transfer */ + if(hi2c->ErrorCode != HAL_I2C_ERROR_NONE) + { + HAL_I2C_ErrorCallback(hi2c); + } + else + { + hi2c->State = HAL_I2C_STATE_READY; + + if(hi2c->Mode == HAL_I2C_MODE_MEM) + { + hi2c->Mode = HAL_I2C_MODE_NONE; + + HAL_I2C_MemRxCpltCallback(hi2c); + } + else + { + hi2c->Mode = HAL_I2C_MODE_NONE; + + HAL_I2C_MasterRxCpltCallback(hi2c); + } + } + } +} + +/** + * @brief DMA I2C communication error callback. + * @param hdma DMA handle + * @retval None + */ +static void I2C_DMAError(DMA_HandleTypeDef *hdma) +{ + I2C_HandleTypeDef* hi2c = (I2C_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent; + + /* Disable Acknowledge */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + + hi2c->XferCount = 0U; + + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + HAL_I2C_ErrorCallback(hi2c); +} + +/** + * @brief DMA I2C communication abort callback + * (To be called at end of DMA Abort procedure). + * @param hdma: DMA handle. + * @retval None + */ +static void I2C_DMAAbort(DMA_HandleTypeDef *hdma) +{ + I2C_HandleTypeDef* hi2c = ( I2C_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; + + /* Disable Acknowledge */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + + hi2c->XferCount = 0U; + + /* Reset XferAbortCallback */ + hi2c->hdmatx->XferAbortCallback = NULL; + hi2c->hdmarx->XferAbortCallback = NULL; + + /* Check if come from abort from user */ + if(hi2c->State == HAL_I2C_STATE_ABORT) + { + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Disable I2C peripheral to prevent dummy data in buffer */ + __HAL_I2C_DISABLE(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ + HAL_I2C_AbortCpltCallback(hi2c); + } + else + { + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Disable I2C peripheral to prevent dummy data in buffer */ + __HAL_I2C_DISABLE(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ + HAL_I2C_ErrorCallback(hi2c); + } +} + +/** + * @brief This function handles I2C Communication Timeout. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @param Flag specifies the I2C flag to check. + * @param Status The new Flag status (SET or RESET). + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_WaitOnFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Flag, FlagStatus Status, uint32_t Timeout, uint32_t Tickstart) +{ + while(__HAL_I2C_GET_FLAG(hi2c, Flag) == Status) + { + /* Check for the Timeout */ + if(Timeout != HAL_MAX_DELAY) + { + if((Timeout == 0U)||((HAL_GetTick() - Tickstart ) > Timeout)) + { + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->State= HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_TIMEOUT; + } + } + } + return HAL_OK; +} + +/** + * @brief This function handles I2C Communication Timeout for Master addressing phase. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @param Flag specifies the I2C flag to check. + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_WaitOnMasterAddressFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Flag, uint32_t Timeout, uint32_t Tickstart) +{ + while(__HAL_I2C_GET_FLAG(hi2c, Flag) == RESET) + { + if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) == SET) + { + /* Generate Stop */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_STOP); + + /* Clear AF Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + hi2c->ErrorCode = HAL_I2C_ERROR_AF; + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->State= HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + /* Check for the Timeout */ + if(Timeout != HAL_MAX_DELAY) + { + if((Timeout == 0U)||((HAL_GetTick() - Tickstart ) > Timeout)) + { + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->State= HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_TIMEOUT; + } + } + } + return HAL_OK; +} + +/** + * @brief This function handles I2C Communication Timeout for specific usage of TXE flag. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_WaitOnTXEFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart) +{ + while(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXE) == RESET) + { + /* Check if a NACK is detected */ + if(I2C_IsAcknowledgeFailed(hi2c) != HAL_OK) + { + return HAL_ERROR; + } + + /* Check for the Timeout */ + if(Timeout != HAL_MAX_DELAY) + { + if((Timeout == 0U) || ((HAL_GetTick()-Tickstart) > Timeout)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->State= HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_TIMEOUT; + } + } + } + return HAL_OK; +} + +/** + * @brief This function handles I2C Communication Timeout for specific usage of BTF flag. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_WaitOnBTFFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart) +{ + while(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BTF) == RESET) + { + /* Check if a NACK is detected */ + if(I2C_IsAcknowledgeFailed(hi2c) != HAL_OK) + { + return HAL_ERROR; + } + + /* Check for the Timeout */ + if(Timeout != HAL_MAX_DELAY) + { + if((Timeout == 0U) || ((HAL_GetTick()-Tickstart) > Timeout)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->State= HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_TIMEOUT; + } + } + } + return HAL_OK; +} + +/** + * @brief This function handles I2C Communication Timeout for specific usage of STOP flag. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_WaitOnSTOPFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart) +{ + while(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == RESET) + { + /* Check if a NACK is detected */ + if(I2C_IsAcknowledgeFailed(hi2c) != HAL_OK) + { + return HAL_ERROR; + } + + /* Check for the Timeout */ + if((Timeout == 0U) || ((HAL_GetTick()-Tickstart) > Timeout)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->State= HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_TIMEOUT; + } + } + return HAL_OK; +} + +/** + * @brief This function handles I2C Communication Timeout for specific usage of RXNE flag. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_WaitOnRXNEFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart) +{ + + while(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == RESET) + { + /* Check if a STOPF is detected */ + if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == SET) + { + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->State= HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + /* Check for the Timeout */ + if((Timeout == 0U) || ((HAL_GetTick()-Tickstart) > Timeout)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + hi2c->State= HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_TIMEOUT; + } + } + return HAL_OK; +} + +/** + * @brief This function handles Acknowledge failed detection during an I2C Communication. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_IsAcknowledgeFailed(I2C_HandleTypeDef *hi2c) +{ + if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) == SET) + { + /* Clear NACKF Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + hi2c->ErrorCode = HAL_I2C_ERROR_AF; + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->State= HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + return HAL_OK; +} +/** + * @} + */ + +#endif /* HAL_I2C_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_i2s.c b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_i2s.c new file mode 100755 index 0000000..bc0e439 --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_i2s.c @@ -0,0 +1,1412 @@ +/** + ****************************************************************************** + * @file stm32l1xx_hal_i2s.c + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief I2S HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Integrated Interchip Sound (I2S) peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral State and Errors functions + @verbatim + =============================================================================== + ##### How to use this driver ##### + =============================================================================== + [..] + The I2S HAL driver can be used as follow: + + (#) Declare a I2S_HandleTypeDef handle structure. + (#) Initialize the I2S low level resources by implement the HAL_I2S_MspInit() API: + (##) Enable the SPIx interface clock. + (##) I2S pins configuration: + (+++) Enable the clock for the I2S GPIOs. + (+++) Configure these I2S pins as alternate function. + (##) NVIC configuration if you need to use interrupt process (HAL_I2S_Transmit_IT() + and HAL_I2S_Receive_IT() APIs). + (+++) Configure the I2Sx interrupt priority. + (+++) Enable the NVIC I2S IRQ handle. + (##) DMA Configuration if you need to use DMA process (HAL_I2S_Transmit_DMA() + and HAL_I2S_Receive_DMA() APIs: + (+++) Declare a DMA handle structure for the Tx/Rx Channel. + (+++) Enable the DMAx interface clock. + (+++) Configure the declared DMA handle structure with the required Tx/Rx parameters. + (+++) Configure the DMA Tx/Rx Channel. + (+++) Associate the initilalized DMA handle to the I2S DMA Tx/Rx handle. + (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the + DMA Tx/Rx Channel. + + (#) Program the Mode, Standard, Data Format, MCLK Output, Audio frequency and Polarity + using HAL_I2S_Init() function. + + -@- The specific I2S interrupts (Transmission complete interrupt, + RXNE interrupt and Error Interrupts) will be managed using the macros + __HAL_I2S_ENABLE_IT() and __HAL_I2S_DISABLE_IT() inside the transmit and receive process. + -@- Make sure that either: + (+@) External clock source is configured after setting correctly + the define constant HSE_VALUE in the stm32l1xx_hal_conf.h file. + + (#) Three mode of operations are available within this driver : + + *** Polling mode IO operation *** + ================================= + [..] + (+) Send an amount of data in blocking mode using HAL_I2S_Transmit() + (+) Receive an amount of data in blocking mode using HAL_I2S_Receive() + + *** Interrupt mode IO operation *** + =================================== + [..] + (+) Send an amount of data in non blocking mode using HAL_I2S_Transmit_IT() + (+) At transmission end of half transfer HAL_I2S_TxHalfCpltCallback is executed and user can + add his own code by customization of function pointer HAL_I2S_TxHalfCpltCallback + (+) At transmission end of transfer HAL_I2S_TxCpltCallback is executed and user can + add his own code by customization of function pointer HAL_I2S_TxCpltCallback + (+) Receive an amount of data in non blocking mode using HAL_I2S_Receive_IT() + (+) At reception end of half transfer HAL_I2S_RxHalfCpltCallback is executed and user can + add his own code by customization of function pointer HAL_I2S_RxHalfCpltCallback + (+) At reception end of transfer HAL_I2S_RxCpltCallback is executed and user can + add his own code by customization of function pointer HAL_I2S_RxCpltCallback + (+) In case of transfer Error, HAL_I2S_ErrorCallback() function is executed and user can + add his own code by customization of function pointer HAL_I2S_ErrorCallback + + *** DMA mode IO operation *** + ============================== + [..] + (+) Send an amount of data in non blocking mode (DMA) using HAL_I2S_Transmit_DMA() + (+) At transmission end of half transfer HAL_I2S_TxHalfCpltCallback is executed and user can + add his own code by customization of function pointer HAL_I2S_TxHalfCpltCallback + (+) At transmission end of transfer HAL_I2S_TxCpltCallback is executed and user can + add his own code by customization of function pointer HAL_I2S_TxCpltCallback + (+) Receive an amount of data in non blocking mode (DMA) using HAL_I2S_Receive_DMA() + (+) At reception end of half transfer HAL_I2S_RxHalfCpltCallback is executed and user can + add his own code by customization of function pointer HAL_I2S_RxHalfCpltCallback + (+) At reception end of transfer HAL_I2S_RxCpltCallback is executed and user can + add his own code by customization of function pointer HAL_I2S_RxCpltCallback + (+) In case of transfer Error, HAL_I2S_ErrorCallback() function is executed and user can + add his own code by customization of function pointer HAL_I2S_ErrorCallback + (+) Pause the DMA Transfer using HAL_I2S_DMAPause() + (+) Resume the DMA Transfer using HAL_I2S_DMAResume() + (+) Stop the DMA Transfer using HAL_I2S_DMAStop() + + *** I2S HAL driver macros list *** + ============================================= + [..] + Below the list of most used macros in USART HAL driver. + + (+) __HAL_I2S_ENABLE: Enable the specified SPI peripheral (in I2S mode) + (+) __HAL_I2S_DISABLE: Disable the specified SPI peripheral (in I2S mode) + (+) __HAL_I2S_ENABLE_IT : Enable the specified I2S interrupts + (+) __HAL_I2S_DISABLE_IT : Disable the specified I2S interrupts + (+) __HAL_I2S_GET_FLAG: Check whether the specified I2S flag is set or not + + [..] + (@) You can refer to the I2S HAL driver header file for more useful macros + + @endverbatim + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_hal.h" + +/** @addtogroup STM32L1xx_HAL_Driver + * @{ + */ + +/** @defgroup I2S I2S + * @brief I2S HAL module driver + * @{ + */ + +#ifdef HAL_I2S_MODULE_ENABLED +#if defined(STM32L100xC) || \ + defined(STM32L151xC) || defined(STM32L151xCA) || defined(STM32L151xD) || defined(STM32L151xE) || defined(STM32L151xDX) || \ + defined(STM32L152xC) || defined(STM32L152xCA) || defined(STM32L152xD) || defined(STM32L152xE) || defined(STM32L152xDX) || \ + defined(STM32L162xC) || defined(STM32L162xCA) || defined(STM32L162xD) || defined(STM32L162xE) || defined(STM32L162xDX) + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +static void I2S_DMATxCplt(DMA_HandleTypeDef *hdma); +static void I2S_DMATxHalfCplt(DMA_HandleTypeDef *hdma); +static void I2S_DMARxCplt(DMA_HandleTypeDef *hdma); +static void I2S_DMARxHalfCplt(DMA_HandleTypeDef *hdma); +static void I2S_DMAError(DMA_HandleTypeDef *hdma); +static void I2S_Transmit_IT(I2S_HandleTypeDef *hi2s); +static void I2S_Receive_IT(I2S_HandleTypeDef *hi2s); +static HAL_StatusTypeDef I2S_WaitFlagStateUntilTimeout(I2S_HandleTypeDef *hi2s, uint32_t Flag, uint32_t Status, uint32_t Timeout); + +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup I2S_Exported_Functions I2S Exported Functions + * @{ + */ + +/** @defgroup I2S_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] This subsection provides a set of functions allowing to initialize and + de-initialiaze the I2Sx peripheral in simplex mode: + + (+) User must Implement HAL_I2S_MspInit() function in which he configures + all related peripherals resources (CLOCK, GPIO, DMA, IT and NVIC ). + + (+) Call the function HAL_I2S_Init() to configure the selected device with + the selected configuration: + (++) Mode + (++) Standard + (++) Data Format + (++) MCLK Output + (++) Audio frequency + (++) Polarity + + (+) Call the function HAL_I2S_DeInit() to restore the default configuration + of the selected I2Sx periperal. + @endverbatim + * @{ + */ + +/** + * @brief Initializes the I2S according to the specified parameters + * in the I2S_InitTypeDef and create the associated handle. + * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2S_Init(I2S_HandleTypeDef *hi2s) +{ + uint32_t i2sdiv = 2, i2sodd = 0, packetlength = 1; + uint32_t tmp = 0, i2sclk = 0; + + /* Check the I2S handle allocation */ + if(hi2s == NULL) + { + return HAL_ERROR; + } + + /* Check the I2S parameters */ + assert_param(IS_I2S_ALL_INSTANCE(hi2s->Instance)); + assert_param(IS_I2S_MODE(hi2s->Init.Mode)); + assert_param(IS_I2S_STANDARD(hi2s->Init.Standard)); + assert_param(IS_I2S_DATA_FORMAT(hi2s->Init.DataFormat)); + assert_param(IS_I2S_MCLK_OUTPUT(hi2s->Init.MCLKOutput)); + assert_param(IS_I2S_AUDIO_FREQ(hi2s->Init.AudioFreq)); + assert_param(IS_I2S_CPOL(hi2s->Init.CPOL)); + + if(hi2s->State == HAL_I2S_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hi2s->Lock = HAL_UNLOCKED; + + /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */ + HAL_I2S_MspInit(hi2s); + } + + hi2s->State = HAL_I2S_STATE_BUSY; + + /* If the default value has to be written, reinitialize i2sdiv and i2sodd*/ + if(hi2s->Init.AudioFreq == I2S_AUDIOFREQ_DEFAULT) + { + i2sodd = (uint32_t)0; + i2sdiv = (uint32_t)2; + } + /* If the requested audio frequency is not the default, compute the prescaler */ + else + { + /* Check the frame length (For the Prescaler computing) *******************/ + if(hi2s->Init.DataFormat == I2S_DATAFORMAT_16B) + { + /* Packet length is 16 bits */ + packetlength = 1; + } + else + { + /* Packet length is 32 bits */ + packetlength = 2; + } + + /* Get the source clock value: based on System Clock value */ + i2sclk = HAL_RCC_GetSysClockFreq(); + + /* Compute the Real divider depending on the MCLK output state, with a floating point */ + if(hi2s->Init.MCLKOutput == I2S_MCLKOUTPUT_ENABLE) + { + /* MCLK output is enabled */ + tmp = (uint32_t)(((((i2sclk / 256) * 10) / hi2s->Init.AudioFreq)) + 5); + } + else + { + /* MCLK output is disabled */ + tmp = (uint32_t)(((((i2sclk / (32 * packetlength)) *10 ) / hi2s->Init.AudioFreq)) + 5); + } + + /* Remove the flatting point */ + tmp = tmp / 10; + + /* Check the parity of the divider */ + i2sodd = (uint32_t)(tmp & (uint32_t)1); + + /* Compute the i2sdiv prescaler */ + i2sdiv = (uint32_t)((tmp - i2sodd) / 2); + + /* Get the Mask for the Odd bit (SPI_I2SPR[8]) register */ + i2sodd = (uint32_t) (i2sodd << 8); + } + + /* Test if the divider is 1 or 0 or greater than 0xFF */ + if((i2sdiv < 2) || (i2sdiv > 0xFF)) + { + /* Set the default values */ + i2sdiv = 2; + i2sodd = 0; + } + + /*----------------------- SPIx I2SCFGR & I2SPR Configuration ----------------*/ + /* Clear I2SMOD, I2SE, I2SCFG, PCMSYNC, I2SSTD, CKPOL, DATLEN and CHLEN bits */ + /* And configure the I2S with the I2S_InitStruct values */ + MODIFY_REG( hi2s->Instance->I2SCFGR, (SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN |\ + SPI_I2SCFGR_CKPOL | SPI_I2SCFGR_I2SSTD |\ + SPI_I2SCFGR_PCMSYNC | SPI_I2SCFGR_I2SCFG |\ + SPI_I2SCFGR_I2SE | SPI_I2SCFGR_I2SMOD),\ + (SPI_I2SCFGR_I2SMOD | hi2s->Init.Mode |\ + hi2s->Init.Standard | hi2s->Init.DataFormat |\ + hi2s->Init.CPOL)); + + /* Write to SPIx I2SPR register the computed value */ + hi2s->Instance->I2SPR = (uint32_t)((uint32_t)i2sdiv | (uint32_t)(i2sodd | (uint32_t)hi2s->Init.MCLKOutput)); + + hi2s->ErrorCode = HAL_I2S_ERROR_NONE; + hi2s->State= HAL_I2S_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the I2S peripheral + * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2S_DeInit(I2S_HandleTypeDef *hi2s) +{ + /* Check the I2S handle allocation */ + if(hi2s == NULL) + { + return HAL_ERROR; + } + + hi2s->State = HAL_I2S_STATE_BUSY; + + /* Disable the I2S Peripheral Clock */ + __HAL_I2S_DISABLE(hi2s); + + /* DeInit the low level hardware: GPIO, CLOCK, NVIC... */ + HAL_I2S_MspDeInit(hi2s); + + hi2s->ErrorCode = HAL_I2S_ERROR_NONE; + hi2s->State = HAL_I2S_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(hi2s); + + return HAL_OK; +} + +/** + * @brief I2S MSP Init + * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval None + */ + __weak void HAL_I2S_MspInit(I2S_HandleTypeDef *hi2s) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2s); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_I2S_MspInit could be implemented in the user file + */ +} + +/** + * @brief I2S MSP DeInit + * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval None + */ + __weak void HAL_I2S_MspDeInit(I2S_HandleTypeDef *hi2s) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2s); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_I2S_MspDeInit could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup I2S_Exported_Functions_Group2 IO operation functions + * @brief Data transfers functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to manage the I2S data + transfers. + + (#) There are two modes of transfer: + (++) Blocking mode : The communication is performed in the polling mode. + The status of all data processing is returned by the same function + after finishing transfer. + (++) No-Blocking mode : The communication is performed using Interrupts + or DMA. These functions return the status of the transfer startup. + The end of the data processing will be indicated through the + dedicated I2S IRQ when using Interrupt mode or the DMA IRQ when + using DMA mode. + + (#) Blocking mode functions are : + (++) HAL_I2S_Transmit() + (++) HAL_I2S_Receive() + + (#) No-Blocking mode functions with Interrupt are : + (++) HAL_I2S_Transmit_IT() + (++) HAL_I2S_Receive_IT() + + (#) No-Blocking mode functions with DMA are : + (++) HAL_I2S_Transmit_DMA() + (++) HAL_I2S_Receive_DMA() + + (#) A set of Transfer Complete Callbacks are provided in non Blocking mode: + (++) HAL_I2S_TxCpltCallback() + (++) HAL_I2S_RxCpltCallback() + (++) HAL_I2S_ErrorCallback() + +@endverbatim + * @{ + */ + +/** + * @brief Transmit an amount of data in blocking mode + * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @param pData: a 16-bit pointer to data buffer. + * @param Size: number of data sample to be sent: + * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S + * configuration phase, the Size parameter means the number of 16-bit data length + * in the transaction and when a 24-bit data frame or a 32-bit data frame is selected + * the Size parameter means the number of 16-bit data length. + * @param Timeout: Timeout duration + * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization + * between Master and Slave(example: audio streaming). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2S_Transmit(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout) +{ + if((pData == NULL ) || (Size == 0)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hi2s); + + if(hi2s->State == HAL_I2S_STATE_READY) + { + if(((hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN)) == I2S_DATAFORMAT_24B)||\ + ((hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN)) == I2S_DATAFORMAT_32B)) + { + hi2s->TxXferSize = (Size << 1); + hi2s->TxXferCount = (Size << 1); + } + else + { + hi2s->TxXferSize = Size; + hi2s->TxXferCount = Size; + } + + /* Set state and reset error code */ + hi2s->ErrorCode = HAL_I2S_ERROR_NONE; + hi2s->State = HAL_I2S_STATE_BUSY_TX; + hi2s->pTxBuffPtr = pData; + + /* Check if the I2S is already enabled */ + if((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE) + { + /* Enable I2S peripheral */ + __HAL_I2S_ENABLE(hi2s); + } + + while(hi2s->TxXferCount > 0) + { + /* Wait until TXE flag is set */ + if (I2S_WaitFlagStateUntilTimeout(hi2s, I2S_FLAG_TXE, RESET, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + hi2s->Instance->DR = (*hi2s->pTxBuffPtr++); + hi2s->TxXferCount--; + } + + /* Wait until TXE flag is set, to confirm the end of the transcation */ + if (I2S_WaitFlagStateUntilTimeout(hi2s, I2S_FLAG_TXE, RESET, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + + /* Check if Slave mode is selected */ + if(((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG) == I2S_MODE_SLAVE_TX) || ((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG) == I2S_MODE_SLAVE_RX)) + { + /* Wait until Busy flag is reset */ + if (I2S_WaitFlagStateUntilTimeout(hi2s, I2S_FLAG_BSY, SET, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + } + hi2s->State = HAL_I2S_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2s); + + return HAL_OK; + } + else + { + /* Process Unlocked */ + __HAL_UNLOCK(hi2s); + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in blocking mode + * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @param pData: a 16-bit pointer to data buffer. + * @param Size: number of data sample to be sent: + * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S + * configuration phase, the Size parameter means the number of 16-bit data length + * in the transaction and when a 24-bit data frame or a 32-bit data frame is selected + * the Size parameter means the number of 16-bit data length. + * @param Timeout: Timeout duration + * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization + * between Master and Slave(example: audio streaming). + * @note In I2S Master Receiver mode, just after enabling the peripheral the clock will be generate + * in continouse way and as the I2S is not disabled at the end of the I2S transaction. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2S_Receive(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout) +{ + if((pData == NULL ) || (Size == 0)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hi2s); + + if(hi2s->State == HAL_I2S_STATE_READY) + { + if(((hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN)) == I2S_DATAFORMAT_24B)||\ + ((hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN)) == I2S_DATAFORMAT_32B)) + { + hi2s->RxXferSize = (Size << 1); + hi2s->RxXferCount = (Size << 1); + } + else + { + hi2s->RxXferSize = Size; + hi2s->RxXferCount = Size; + } + + /* Set state and reset error code */ + hi2s->ErrorCode = HAL_I2S_ERROR_NONE; + hi2s->State = HAL_I2S_STATE_BUSY_RX; + hi2s->pRxBuffPtr = pData; + + /* Check if the I2S is already enabled */ + if((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE) + { + /* Enable I2S peripheral */ + __HAL_I2S_ENABLE(hi2s); + } + + /* Receive data */ + while(hi2s->RxXferCount > 0) + { + /* Wait until RXNE flag is set */ + if (I2S_WaitFlagStateUntilTimeout(hi2s, I2S_FLAG_RXNE, RESET, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + + (*hi2s->pRxBuffPtr++) = hi2s->Instance->DR; + hi2s->RxXferCount--; + } + + hi2s->State = HAL_I2S_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2s); + + return HAL_OK; + } + else + { + /* Process Unlocked */ + __HAL_UNLOCK(hi2s); + return HAL_BUSY; + } +} + +/** + * @brief Transmit an amount of data in non-blocking mode with Interrupt + * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @param pData: a 16-bit pointer to data buffer. + * @param Size: number of data sample to be sent: + * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S + * configuration phase, the Size parameter means the number of 16-bit data length + * in the transaction and when a 24-bit data frame or a 32-bit data frame is selected + * the Size parameter means the number of 16-bit data length. + * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization + * between Master and Slave(example: audio streaming). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2S_Transmit_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size) +{ + if((pData == NULL) || (Size == 0)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hi2s); + + if(hi2s->State == HAL_I2S_STATE_READY) + { + hi2s->pTxBuffPtr = pData; + hi2s->State = HAL_I2S_STATE_BUSY_TX; + hi2s->ErrorCode = HAL_I2S_ERROR_NONE; + + if(((hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN)) == I2S_DATAFORMAT_24B)||\ + ((hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN)) == I2S_DATAFORMAT_32B)) + { + hi2s->TxXferSize = (Size << 1); + hi2s->TxXferCount = (Size << 1); + } + else + { + hi2s->TxXferSize = Size; + hi2s->TxXferCount = Size; + } + + /* Enable TXE and ERR interrupt */ + __HAL_I2S_ENABLE_IT(hi2s, (I2S_IT_TXE | I2S_IT_ERR)); + + /* Check if the I2S is already enabled */ + if((hi2s->Instance->I2SCFGR &SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE) + { + /* Enable I2S peripheral */ + __HAL_I2S_ENABLE(hi2s); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2s); + + return HAL_OK; + } + else + { + /* Process Unlocked */ + __HAL_UNLOCK(hi2s); + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in non-blocking mode with Interrupt + * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @param pData: a 16-bit pointer to the Receive data buffer. + * @param Size: number of data sample to be sent: + * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S + * configuration phase, the Size parameter means the number of 16-bit data length + * in the transaction and when a 24-bit data frame or a 32-bit data frame is selected + * the Size parameter means the number of 16-bit data length. + * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization + * between Master and Slave(example: audio streaming). + * @note It is recommended to use DMA for the I2S receiver to avoid de-synchronisation + * between Master and Slave otherwise the I2S interrupt should be optimized. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2S_Receive_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size) +{ + if((pData == NULL) || (Size == 0)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hi2s); + + if(hi2s->State == HAL_I2S_STATE_READY) + { + hi2s->pRxBuffPtr = pData; + hi2s->State = HAL_I2S_STATE_BUSY_RX; + hi2s->ErrorCode = HAL_I2S_ERROR_NONE; + + if(((hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN)) == I2S_DATAFORMAT_24B)||\ + ((hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN)) == I2S_DATAFORMAT_32B)) + { + hi2s->RxXferSize = (Size << 1); + hi2s->RxXferCount = (Size << 1); + } + else + { + hi2s->RxXferSize = Size; + hi2s->RxXferCount = Size; + } + + /* Enable TXE and ERR interrupt */ + __HAL_I2S_ENABLE_IT(hi2s, (I2S_IT_RXNE | I2S_IT_ERR)); + + /* Check if the I2S is already enabled */ + if((hi2s->Instance->I2SCFGR &SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE) + { + /* Enable I2S peripheral */ + __HAL_I2S_ENABLE(hi2s); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2s); + + return HAL_OK; + } + else + { + /* Process Unlocked */ + __HAL_UNLOCK(hi2s); + return HAL_BUSY; + } +} + +/** + * @brief Transmit an amount of data in non-blocking mode with DMA + * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @param pData: a 16-bit pointer to the Transmit data buffer. + * @param Size: number of data sample to be sent: + * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S + * configuration phase, the Size parameter means the number of 16-bit data length + * in the transaction and when a 24-bit data frame or a 32-bit data frame is selected + * the Size parameter means the number of 16-bit data length. + * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization + * between Master and Slave(example: audio streaming). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2S_Transmit_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size) +{ + if((pData == NULL) || (Size == 0)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hi2s); + + if(hi2s->State == HAL_I2S_STATE_READY) + { + hi2s->pTxBuffPtr = pData; + hi2s->State = HAL_I2S_STATE_BUSY_TX; + hi2s->ErrorCode = HAL_I2S_ERROR_NONE; + + if(((hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN)) == I2S_DATAFORMAT_24B)||\ + ((hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN)) == I2S_DATAFORMAT_32B)) + { + hi2s->TxXferSize = (Size << 1); + hi2s->TxXferCount = (Size << 1); + } + else + { + hi2s->TxXferSize = Size; + hi2s->TxXferCount = Size; + } + + /* Set the I2S Tx DMA Half transfert complete callback */ + hi2s->hdmatx->XferHalfCpltCallback = I2S_DMATxHalfCplt; + + /* Set the I2S Tx DMA transfert complete callback */ + hi2s->hdmatx->XferCpltCallback = I2S_DMATxCplt; + + /* Set the DMA error callback */ + hi2s->hdmatx->XferErrorCallback = I2S_DMAError; + + /* Enable the Tx DMA Channel */ + HAL_DMA_Start_IT(hi2s->hdmatx, (uint32_t)hi2s->pTxBuffPtr, (uint32_t)&hi2s->Instance->DR, hi2s->TxXferSize); + + /* Check if the I2S is already enabled */ + if((hi2s->Instance->I2SCFGR &SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE) + { + /* Enable I2S peripheral */ + __HAL_I2S_ENABLE(hi2s); + } + + /* Check if the I2S Tx request is already enabled */ + if((hi2s->Instance->CR2 & SPI_CR2_TXDMAEN) != SPI_CR2_TXDMAEN) + { + /* Enable Tx DMA Request */ + SET_BIT(hi2s->Instance->CR2, SPI_CR2_TXDMAEN); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2s); + + return HAL_OK; + } + else + { + /* Process Unlocked */ + __HAL_UNLOCK(hi2s); + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in non-blocking mode with DMA + * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @param pData: a 16-bit pointer to the Receive data buffer. + * @param Size: number of data sample to be sent: + * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S + * configuration phase, the Size parameter means the number of 16-bit data length + * in the transaction and when a 24-bit data frame or a 32-bit data frame is selected + * the Size parameter means the number of 16-bit data length. + * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization + * between Master and Slave(example: audio streaming). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2S_Receive_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size) +{ + if((pData == NULL) || (Size == 0)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hi2s); + + if(hi2s->State == HAL_I2S_STATE_READY) + { + hi2s->pRxBuffPtr = pData; + hi2s->State = HAL_I2S_STATE_BUSY_RX; + hi2s->ErrorCode = HAL_I2S_ERROR_NONE; + + if(((hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN)) == I2S_DATAFORMAT_24B)||\ + ((hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN)) == I2S_DATAFORMAT_32B)) + { + hi2s->RxXferSize = (Size << 1); + hi2s->RxXferCount = (Size << 1); + } + else + { + hi2s->RxXferSize = Size; + hi2s->RxXferCount = Size; + } + + + /* Set the I2S Rx DMA Half transfert complete callback */ + hi2s->hdmarx->XferHalfCpltCallback = I2S_DMARxHalfCplt; + + /* Set the I2S Rx DMA transfert complete callback */ + hi2s->hdmarx->XferCpltCallback = I2S_DMARxCplt; + + /* Set the DMA error callback */ + hi2s->hdmarx->XferErrorCallback = I2S_DMAError; + + /* Check if Master Receiver mode is selected */ + if((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG) == I2S_MODE_MASTER_RX) + { + /* Clear the Overrun Flag by a read operation to the SPI_DR register followed by a read + access to the SPI_SR register. */ + __HAL_I2S_CLEAR_OVRFLAG(hi2s); + } + + /* Enable the Rx DMA Channel */ + HAL_DMA_Start_IT(hi2s->hdmarx, (uint32_t)&hi2s->Instance->DR, (uint32_t)hi2s->pRxBuffPtr, hi2s->RxXferSize); + + /* Check if the I2S is already enabled */ + if((hi2s->Instance->I2SCFGR &SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE) + { + /* Enable I2S peripheral */ + __HAL_I2S_ENABLE(hi2s); + } + + /* Check if the I2S Rx request is already enabled */ + if((hi2s->Instance->CR2 &SPI_CR2_RXDMAEN) != SPI_CR2_RXDMAEN) + { + /* Enable Rx DMA Request */ + SET_BIT(hi2s->Instance->CR2, SPI_CR2_RXDMAEN); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2s); + + return HAL_OK; + } + else + { + /* Process Unlocked */ + __HAL_UNLOCK(hi2s); + return HAL_BUSY; + } +} + +/** + * @brief Pauses the audio stream playing from the Media. + * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2S_DMAPause(I2S_HandleTypeDef *hi2s) +{ + /* Process Locked */ + __HAL_LOCK(hi2s); + + if(hi2s->State == HAL_I2S_STATE_BUSY_TX) + { + /* Disable the I2S DMA Tx request */ + CLEAR_BIT(hi2s->Instance->CR2, SPI_CR2_TXDMAEN); + } + else if(hi2s->State == HAL_I2S_STATE_BUSY_RX) + { + /* Disable the I2S DMA Rx request */ + CLEAR_BIT(hi2s->Instance->CR2, SPI_CR2_RXDMAEN); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2s); + + return HAL_OK; +} + +/** + * @brief Resumes the audio stream playing from the Media. + * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2S_DMAResume(I2S_HandleTypeDef *hi2s) +{ + /* Process Locked */ + __HAL_LOCK(hi2s); + + if(hi2s->State == HAL_I2S_STATE_BUSY_TX) + { + /* Enable the I2S DMA Tx request */ + SET_BIT(hi2s->Instance->CR2, SPI_CR2_TXDMAEN); + } + else if(hi2s->State == HAL_I2S_STATE_BUSY_RX) + { + /* Enable the I2S DMA Rx request */ + SET_BIT(hi2s->Instance->CR2, SPI_CR2_RXDMAEN); + } + + /* If the I2S peripheral is still not enabled, enable it */ + if ((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SE) == 0) + { + /* Enable I2S peripheral */ + __HAL_I2S_ENABLE(hi2s); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2s); + + return HAL_OK; +} + +/** + * @brief Resumes the audio stream playing from the Media. + * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2S_DMAStop(I2S_HandleTypeDef *hi2s) +{ + /* Process Locked */ + __HAL_LOCK(hi2s); + + /* Disable the I2S Tx/Rx DMA requests */ + CLEAR_BIT(hi2s->Instance->CR2, SPI_CR2_TXDMAEN); + CLEAR_BIT(hi2s->Instance->CR2, SPI_CR2_RXDMAEN); + + /* Abort the I2S DMA Channel tx */ + if(hi2s->hdmatx != NULL) + { + /* Disable the I2S DMA channel */ + __HAL_DMA_DISABLE(hi2s->hdmatx); + HAL_DMA_Abort(hi2s->hdmatx); + } + /* Abort the I2S DMA Channel rx */ + if(hi2s->hdmarx != NULL) + { + /* Disable the I2S DMA channel */ + __HAL_DMA_DISABLE(hi2s->hdmarx); + HAL_DMA_Abort(hi2s->hdmarx); + } + + /* Disable I2S peripheral */ + __HAL_I2S_DISABLE(hi2s); + + hi2s->State = HAL_I2S_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2s); + + return HAL_OK; +} + +/** + * @brief This function handles I2S interrupt request. + * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval None + */ +void HAL_I2S_IRQHandler(I2S_HandleTypeDef *hi2s) +{ + uint32_t i2ssr = hi2s->Instance->SR; + + /* I2S in mode Receiver ------------------------------------------------*/ + if(((i2ssr & I2S_FLAG_OVR) != I2S_FLAG_OVR) && + ((i2ssr & I2S_FLAG_RXNE) == I2S_FLAG_RXNE) && (__HAL_I2S_GET_IT_SOURCE(hi2s, I2S_IT_RXNE) != RESET)) + { + I2S_Receive_IT(hi2s); + return; + } + + /* I2S in mode Tramitter -----------------------------------------------*/ + if(((i2ssr & I2S_FLAG_TXE) == I2S_FLAG_TXE) && (__HAL_I2S_GET_IT_SOURCE(hi2s, I2S_IT_TXE) != RESET)) + { + I2S_Transmit_IT(hi2s); + return; + } + + /* I2S interrupt error -------------------------------------------------*/ + if(__HAL_I2S_GET_IT_SOURCE(hi2s, I2S_IT_ERR) != RESET) + { + /* I2S Overrun error interrupt occured ---------------------------------*/ + if((i2ssr & I2S_FLAG_OVR) == I2S_FLAG_OVR) + { + /* Disable RXNE and ERR interrupt */ + __HAL_I2S_DISABLE_IT(hi2s, (I2S_IT_RXNE | I2S_IT_ERR)); + + /* Set the error code and execute error callback*/ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_OVR); + } + + /* I2S Underrun error interrupt occured --------------------------------*/ + if((i2ssr & I2S_FLAG_UDR) == I2S_FLAG_UDR) + { + /* Disable TXE and ERR interrupt */ + __HAL_I2S_DISABLE_IT(hi2s, (I2S_IT_TXE | I2S_IT_ERR)); + + /* Set the error code and execute error callback*/ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_UDR); + } + + /* I2S Frame format error interrupt occured --------------------------*/ + if((i2ssr & I2S_FLAG_FRE) == I2S_FLAG_FRE) + { + /* Disable TXE and ERR interrupt */ + __HAL_I2S_DISABLE_IT(hi2s, (I2S_IT_TXE | I2S_IT_RXNE | I2S_IT_ERR)); + + /* Set the error code and execute error callback*/ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_FRE); + } + + /* Set the I2S State ready */ + hi2s->State = HAL_I2S_STATE_READY; + /* Call the Error Callback */ + HAL_I2S_ErrorCallback(hi2s); + } +} + +/** + * @brief Tx Transfer Half completed callbacks + * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval None + */ + __weak void HAL_I2S_TxHalfCpltCallback(I2S_HandleTypeDef *hi2s) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2s); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_I2S_TxHalfCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Tx Transfer completed callbacks + * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval None + */ + __weak void HAL_I2S_TxCpltCallback(I2S_HandleTypeDef *hi2s) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2s); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_I2S_TxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Rx Transfer half completed callbacks + * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval None + */ +__weak void HAL_I2S_RxHalfCpltCallback(I2S_HandleTypeDef *hi2s) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2s); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_I2S_RxHalfCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Rx Transfer completed callbacks + * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval None + */ +__weak void HAL_I2S_RxCpltCallback(I2S_HandleTypeDef *hi2s) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2s); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_I2S_RxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief I2S error callbacks + * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval None + */ + __weak void HAL_I2S_ErrorCallback(I2S_HandleTypeDef *hi2s) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2s); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_I2S_ErrorCallback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup I2S_Exported_Functions_Group3 Peripheral State and Errors functions + * @brief Peripheral State functions + * +@verbatim + =============================================================================== + ##### Peripheral State and Errors functions ##### + =============================================================================== + [..] + This subsection permits to get in run-time the status of the peripheral + and the data flow. + +@endverbatim + * @{ + */ + +/** + * @brief Return the I2S state + * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval HAL state + */ +HAL_I2S_StateTypeDef HAL_I2S_GetState(I2S_HandleTypeDef *hi2s) +{ + return hi2s->State; +} + +/** + * @brief Return the I2S error code + * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval I2S Error Code + */ +uint32_t HAL_I2S_GetError(I2S_HandleTypeDef *hi2s) +{ + return hi2s->ErrorCode; +} +/** + * @} + */ + +/** + * @} + */ + + +/** @defgroup I2S_Private_Functions I2S Private Functions + * @{ + */ +/** + * @brief DMA I2S transmit process complete callback + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void I2S_DMATxCplt(DMA_HandleTypeDef *hdma) +{ + I2S_HandleTypeDef* hi2s = (I2S_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent; + + if((hdma->Instance->CCR & DMA_CCR_CIRC) == 0) + { + /* Disable Tx DMA Request */ + CLEAR_BIT(hi2s->Instance->CR2, SPI_CR2_TXDMAEN); + + hi2s->TxXferCount = 0; + hi2s->State = HAL_I2S_STATE_READY; + } + HAL_I2S_TxCpltCallback(hi2s); +} + +/** + * @brief DMA I2S transmit process half complete callback + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void I2S_DMATxHalfCplt(DMA_HandleTypeDef *hdma) +{ + I2S_HandleTypeDef* hi2s = (I2S_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent; + + HAL_I2S_TxHalfCpltCallback(hi2s); +} + +/** + * @brief DMA I2S receive process complete callback + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void I2S_DMARxCplt(DMA_HandleTypeDef *hdma) +{ + I2S_HandleTypeDef* hi2s = (I2S_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent; + + if((hdma->Instance->CCR & DMA_CCR_CIRC) == 0) + { + /* Disable Rx DMA Request */ + CLEAR_BIT(hi2s->Instance->CR2, SPI_CR2_RXDMAEN); + hi2s->RxXferCount = 0; + hi2s->State = HAL_I2S_STATE_READY; + } + HAL_I2S_RxCpltCallback(hi2s); +} + +/** + * @brief DMA I2S receive process half complete callback + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void I2S_DMARxHalfCplt(DMA_HandleTypeDef *hdma) +{ + I2S_HandleTypeDef* hi2s = (I2S_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent; + + HAL_I2S_RxHalfCpltCallback(hi2s); +} + +/** + * @brief DMA I2S communication error callback + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void I2S_DMAError(DMA_HandleTypeDef *hdma) +{ + I2S_HandleTypeDef* hi2s = (I2S_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent; + + /* Disable Rx and Tx DMA Request */ + CLEAR_BIT(hi2s->Instance->CR2, (SPI_CR2_RXDMAEN | SPI_CR2_TXDMAEN)); + hi2s->TxXferCount = 0; + hi2s->RxXferCount = 0; + + hi2s->State= HAL_I2S_STATE_READY; + + /* Set the error code and execute error callback*/ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_DMA); + HAL_I2S_ErrorCallback(hi2s); +} + +/** + * @brief Transmit an amount of data in non-blocking mode with Interrupt + * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval None + */ +static void I2S_Transmit_IT(I2S_HandleTypeDef *hi2s) +{ + /* Transmit data */ + hi2s->Instance->DR = (*hi2s->pTxBuffPtr++); + hi2s->TxXferCount--; + + if(hi2s->TxXferCount == 0) + { + /* Disable TXE and ERR interrupt */ + __HAL_I2S_DISABLE_IT(hi2s, (I2S_IT_TXE | I2S_IT_ERR)); + + hi2s->State = HAL_I2S_STATE_READY; + HAL_I2S_TxCpltCallback(hi2s); + } +} + +/** + * @brief Receive an amount of data in non-blocking mode with Interrupt + * @param hi2s: I2S handle + * @retval None + */ +static void I2S_Receive_IT(I2S_HandleTypeDef *hi2s) +{ + /* Receive data */ + (*hi2s->pRxBuffPtr++) = hi2s->Instance->DR; + hi2s->RxXferCount--; + + if(hi2s->RxXferCount == 0) + { + /* Disable RXNE and ERR interrupt */ + __HAL_I2S_DISABLE_IT(hi2s, (I2S_IT_RXNE | I2S_IT_ERR)); + + hi2s->State = HAL_I2S_STATE_READY; + HAL_I2S_RxCpltCallback(hi2s); + } +} + + +/** + * @brief This function handles I2S Communication Timeout. + * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @param Flag: Flag checked + * @param Status: Value of the flag expected + * @param Timeout: Duration of the timeout + * @retval HAL status + */ +static HAL_StatusTypeDef I2S_WaitFlagStateUntilTimeout(I2S_HandleTypeDef *hi2s, uint32_t Flag, uint32_t Status, uint32_t Timeout) +{ + uint32_t tickstart = 0; + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Wait until flag is set */ + if(Status == RESET) + { + while(__HAL_I2S_GET_FLAG(hi2s, Flag) == RESET) + { + if(Timeout != HAL_MAX_DELAY) + { + if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout)) + { + /* Set the I2S State ready */ + hi2s->State= HAL_I2S_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2s); + + return HAL_TIMEOUT; + } + } + } + } + else + { + while(__HAL_I2S_GET_FLAG(hi2s, Flag) != RESET) + { + if(Timeout != HAL_MAX_DELAY) + { + if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout)) + { + /* Set the I2S State ready */ + hi2s->State= HAL_I2S_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2s); + + return HAL_TIMEOUT; + } + } + } + } + return HAL_OK; +} + +/** + * @} + */ +#endif /* STM32L100xC || + STM32L151xC || STM32L151xCA || STM32L151xD || STM32L151xE || STM32L151xDX ||\\ + STM32L152xC || STM32L152xCA || STM32L152xD || STM32L152xE || STM32L152xDX ||\\ + STM32L162xC || STM32L162xCA || STM32L162xD || STM32L162xE || STM32L162xDX */ +#endif /* HAL_I2S_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_irda.c b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_irda.c new file mode 100755 index 0000000..b3c022d --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_irda.c @@ -0,0 +1,1573 @@ +/** + ****************************************************************************** + * @file stm32l1xx_hal_irda.c + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief IRDA HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the IrDA SIR ENDEC block (IrDA): + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral State and Errors functions + * + Peripheral Control functions + * + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The IRDA HAL driver can be used as follows: + + (#) Declare a IRDA_HandleTypeDef handle structure. + (#) Initialize the IRDA low level resources by implementing the HAL_IRDA_MspInit() API: + (##) Enable the USARTx interface clock. + (##) IRDA pins configuration: + (+++) Enable the clock for the IRDA GPIOs. + (+++) Configure the IRDA pins as alternate function pull-up. + (##) NVIC configuration if you need to use interrupt process (HAL_IRDA_Transmit_IT() + and HAL_IRDA_Receive_IT() APIs): + (+++) Configure the USARTx interrupt priority. + (+++) Enable the NVIC USART IRQ handle. + (##) DMA Configuration if you need to use DMA process (HAL_IRDA_Transmit_DMA() + and HAL_IRDA_Receive_DMA() APIs): + (+++) Declare a DMA handle structure for the Tx/Rx channel. + (+++) Enable the DMAx interface clock. + (+++) Configure the declared DMA handle structure with the required Tx/Rx parameters. + (+++) Configure the DMA Tx/Rx channel. + (+++) Associate the initilalized DMA handle to the IRDA DMA Tx/Rx handle. + (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the DMA Tx/Rx channel. + (+++) Configure the USARTx interrupt priority and enable the NVIC USART IRQ handle + (used for last byte sending completion detection in DMA non circular mode) + + (#) Program the Baud Rate, Word Length, Parity, IrDA Mode, Prescaler + and Mode(Receiver/Transmitter) in the hirda Init structure. + + (#) Initialize the IRDA registers by calling the HAL_IRDA_Init() API: + (++) This API configures also the low level Hardware GPIO, CLOCK, CORTEX...etc) + by calling the customed HAL_IRDA_MspInit() API. + + -@@- The specific IRDA interrupts (Transmission complete interrupt, + RXNE interrupt and Error Interrupts) will be managed using the macros + __HAL_IRDA_ENABLE_IT() and __HAL_IRDA_DISABLE_IT() inside the transmit and receive process. + + (#) Three operation modes are available within this driver : + + *** Polling mode IO operation *** + ================================= + [..] + (+) Send an amount of data in blocking mode using HAL_IRDA_Transmit() + (+) Receive an amount of data in blocking mode using HAL_IRDA_Receive() + + *** Interrupt mode IO operation *** + =================================== + [..] + (+) Send an amount of data in non blocking mode using HAL_IRDA_Transmit_IT() + (+) At transmission end of transfer HAL_IRDA_TxCpltCallback is executed and user can + add his own code by customization of function pointer HAL_IRDA_TxCpltCallback + (+) Receive an amount of data in non blocking mode using HAL_IRDA_Receive_IT() + (+) At reception end of transfer HAL_IRDA_RxCpltCallback is executed and user can + add his own code by customization of function pointer HAL_IRDA_RxCpltCallback + (+) In case of transfer Error, HAL_IRDA_ErrorCallback() function is executed and user can + add his own code by customization of function pointer HAL_IRDA_ErrorCallback + + *** DMA mode IO operation *** + ============================== + [..] + (+) Send an amount of data in non blocking mode (DMA) using HAL_IRDA_Transmit_DMA() + (+) At transmission end of transfer HAL_IRDA_TxCpltCallback is executed and user can + add his own code by customization of function pointer HAL_IRDA_TxCpltCallback + (+) Receive an amount of data in non blocking mode (DMA) using HAL_IRDA_Receive_DMA() + (+) At reception end of transfer HAL_IRDA_RxCpltCallback is executed and user can + add his own code by customization of function pointer HAL_IRDA_RxCpltCallback + (+) In case of transfer Error, HAL_IRDA_ErrorCallback() function is executed and user can + add his own code by customization of function pointer HAL_IRDA_ErrorCallback + + *** IRDA HAL driver macros list *** + ==================================== + [..] + Below the list of most used macros in IRDA HAL driver. + + (+) __HAL_IRDA_ENABLE: Enable the IRDA peripheral + (+) __HAL_IRDA_DISABLE: Disable the IRDA peripheral + (+) __HAL_IRDA_GET_FLAG : Check whether the specified IRDA flag is set or not + (+) __HAL_IRDA_CLEAR_FLAG : Clear the specified IRDA pending flag + (+) __HAL_IRDA_ENABLE_IT: Enable the specified IRDA interrupt + (+) __HAL_IRDA_DISABLE_IT: Disable the specified IRDA interrupt + (+) __HAL_IRDA_GET_IT_SOURCE: Check whether the specified IRDA interrupt has occurred or not + + [..] + (@) You can refer to the IRDA HAL driver header file for more useful macros + + @endverbatim + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_hal.h" + +/** @addtogroup STM32L1xx_HAL_Driver + * @{ + */ + +/** @defgroup IRDA IRDA + * @brief HAL IRDA module driver + * @{ + */ + +#ifdef HAL_IRDA_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup IRDA_Private_Constants IRDA Private Constants + * @{ + */ +#define IRDA_DR_MASK_U16_8DATABITS (uint16_t)0x00FF +#define IRDA_DR_MASK_U16_9DATABITS (uint16_t)0x01FF + +#define IRDA_DR_MASK_U8_7DATABITS (uint8_t)0x7F +#define IRDA_DR_MASK_U8_8DATABITS (uint8_t)0xFF + + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @addtogroup IRDA_Private_Functions IRDA Private Functions + * @{ + */ +static HAL_StatusTypeDef IRDA_Transmit_IT(IRDA_HandleTypeDef *hirda); +static HAL_StatusTypeDef IRDA_EndTransmit_IT(IRDA_HandleTypeDef *hirda); +static HAL_StatusTypeDef IRDA_Receive_IT(IRDA_HandleTypeDef *hirda); +static void IRDA_SetConfig (IRDA_HandleTypeDef *hirda); +static void IRDA_DMATransmitCplt(DMA_HandleTypeDef *hdma); +static void IRDA_DMATransmitHalfCplt(DMA_HandleTypeDef *hdma); +static void IRDA_DMAReceiveCplt(DMA_HandleTypeDef *hdma); +static void IRDA_DMAReceiveHalfCplt(DMA_HandleTypeDef *hdma); +static void IRDA_DMAError(DMA_HandleTypeDef *hdma); +static HAL_StatusTypeDef IRDA_WaitOnFlagUntilTimeout(IRDA_HandleTypeDef *hirda, uint32_t Flag, FlagStatus Status, uint32_t Timeout); +/** + * @} + */ + +/* Exported functions ---------------------------------------------------------*/ + +/** @defgroup IRDA_Exported_Functions IRDA Exported Functions + * @{ + */ + +/** @defgroup IRDA_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + ============================================================================== + ##### Initialization and Configuration functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to initialize the USARTx or the UARTy + in IrDA mode. + (+) For the asynchronous mode only these parameters can be configured: + (++) Baud Rate + (++) Word Length + (++) Parity + (++) Prescaler: A pulse of width less than two and greater than one PSC period(s) may or may + not be rejected. The receiver set up time should be managed by software. The IrDA physical layer + specification specifies a minimum of 10 ms delay between transmission and + reception (IrDA is a half duplex protocol). + (++) Mode: Receiver/transmitter modes + (++) IrDAMode: the IrDA can operate in the Normal mode or in the Low power mode. + + [..] + The HAL_IRDA_Init() function follows IRDA configuration procedures (details for the procedures + are available in reference manual (RM0038)). + +@endverbatim + * @{ + */ + + +/* + Additionnal remark: If the parity is enabled, then the MSB bit of the data written + in the data register is transmitted but is changed by the parity bit. + Depending on the frame length defined by the M bit (8-bits or 9-bits), + the possible IRDA frame formats are as listed in the following table: + +-------------------------------------------------------------+ + | M bit | PCE bit | IRDA frame | + |---------------------|---------------------------------------| + | 0 | 0 | | SB | 8 bit data | STB | | + |---------|-----------|---------------------------------------| + | 0 | 1 | | SB | 7 bit data | PB | STB | | + |---------|-----------|---------------------------------------| + | 1 | 0 | | SB | 9 bit data | STB | | + |---------|-----------|---------------------------------------| + | 1 | 1 | | SB | 8 bit data | PB | STB | | + +-------------------------------------------------------------+ +*/ + +/** + * @brief Initializes the IRDA mode according to the specified + * parameters in the IRDA_InitTypeDef and create the associated handle. + * @param hirda: Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_IRDA_Init(IRDA_HandleTypeDef *hirda) +{ + /* Check the IRDA handle allocation */ + if(hirda == NULL) + { + return HAL_ERROR; + } + + /* Check the IRDA instance parameters */ + assert_param(IS_IRDA_INSTANCE(hirda->Instance)); + /* Check the IRDA mode parameter in the IRDA handle */ + assert_param(IS_IRDA_POWERMODE(hirda->Init.IrDAMode)); + + if(hirda->State == HAL_IRDA_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hirda->Lock = HAL_UNLOCKED; + + /* Init the low level hardware */ + HAL_IRDA_MspInit(hirda); + } + + hirda->State = HAL_IRDA_STATE_BUSY; + + /* Disable the IRDA peripheral */ + __HAL_IRDA_DISABLE(hirda); + + /* Set the IRDA communication parameters */ + IRDA_SetConfig(hirda); + + /* In IrDA mode, the following bits must be kept cleared: + - LINEN, STOP and CLKEN bits in the USART_CR2 register, + - SCEN and HDSEL bits in the USART_CR3 register.*/ + CLEAR_BIT(hirda->Instance->CR2, (USART_CR2_LINEN | USART_CR2_STOP | USART_CR2_CLKEN)); + CLEAR_BIT(hirda->Instance->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL)); + + /* Enable the IRDA peripheral */ + __HAL_IRDA_ENABLE(hirda); + + /* Set the prescaler */ + MODIFY_REG(hirda->Instance->GTPR, USART_GTPR_PSC, hirda->Init.Prescaler); + + /* Configure the IrDA mode */ + MODIFY_REG(hirda->Instance->CR3, USART_CR3_IRLP, hirda->Init.IrDAMode); + + /* Enable the IrDA mode by setting the IREN bit in the CR3 register */ + SET_BIT(hirda->Instance->CR3, USART_CR3_IREN); + + /* Initialize the IRDA state*/ + hirda->ErrorCode = HAL_IRDA_ERROR_NONE; + hirda->State= HAL_IRDA_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the IRDA peripheral + * @param hirda: Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_IRDA_DeInit(IRDA_HandleTypeDef *hirda) +{ + /* Check the IRDA handle allocation */ + if(hirda == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_IRDA_INSTANCE(hirda->Instance)); + + hirda->State = HAL_IRDA_STATE_BUSY; + + /* Disable the Peripheral */ + __HAL_IRDA_DISABLE(hirda); + + /* DeInit the low level hardware */ + HAL_IRDA_MspDeInit(hirda); + + hirda->ErrorCode = HAL_IRDA_ERROR_NONE; + hirda->State = HAL_IRDA_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(hirda); + + return HAL_OK; +} + +/** + * @brief IRDA MSP Init. + * @param hirda: Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval None + */ + __weak void HAL_IRDA_MspInit(IRDA_HandleTypeDef *hirda) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hirda); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_IRDA_MspInit can be implemented in the user file + */ +} + +/** + * @brief IRDA MSP DeInit. + * @param hirda: Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval None + */ + __weak void HAL_IRDA_MspDeInit(IRDA_HandleTypeDef *hirda) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hirda); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_IRDA_MspDeInit can be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup IRDA_Exported_Functions_Group2 IO operation functions + * @brief IRDA Transmit and Receive functions + * +@verbatim + ============================================================================== + ##### IO operation functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to manage the IRDA data transfers. + + [..] + IrDA is a half duplex communication protocol. If the Transmitter is busy, any data + on the IrDA receive line will be ignored by the IrDA decoder and if the Receiver + is busy, data on the TX from the USART to IrDA will not be encoded by IrDA. + While receiving data, transmission should be avoided as the data to be transmitted + could be corrupted. + + (#) There are two modes of transfer: + (++) Blocking mode: The communication is performed in polling mode. + The HAL status of all data processing is returned by the same function + after finishing transfer. + (++) No-Blocking mode: The communication is performed using Interrupts + or DMA, These API's return the HAL status. + The end of the data processing will be indicated through the + dedicated IRDA IRQ when using Interrupt mode or the DMA IRQ when + using DMA mode. + The HAL_IRDA_TxCpltCallback(), HAL_IRDA_RxCpltCallback() user callbacks + will be executed respectively at the end of the transmit or Receive process + The HAL_IRDA_ErrorCallback() user callback will be executed when a communication + error is detected + + (#) Blocking mode APIs are : + (++) HAL_IRDA_Transmit() + (++) HAL_IRDA_Receive() + + (#) Non Blocking mode APIs with Interrupt are : + (++) HAL_IRDA_Transmit_IT() + (++) HAL_IRDA_Receive_IT() + (++) HAL_IRDA_IRQHandler() + + (#) Non Blocking mode functions with DMA are : + (++) HAL_IRDA_Transmit_DMA() + (++) HAL_IRDA_Receive_DMA() + (++) HAL_IRDA_DMAPause() + (++) HAL_IRDA_DMAResume() + (++) HAL_IRDA_DMAStop() + + (#) A set of Transfer Complete Callbacks are provided in non Blocking mode: + (++) HAL_IRDA_TxHalfCpltCallback() + (++) HAL_IRDA_TxCpltCallback() + (++) HAL_IRDA_RxHalfCpltCallback() + (++) HAL_IRDA_RxCpltCallback() + (++) HAL_IRDA_ErrorCallback() + +@endverbatim + * @{ + */ + +/** + * @brief Sends an amount of data in blocking mode. + * @param hirda: Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @param pData: Pointer to data buffer + * @param Size: Amount of data to be sent + * @param Timeout: Specify timeout value + * @retval HAL status + */ +HAL_StatusTypeDef HAL_IRDA_Transmit(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + uint16_t* tmp = 0; + uint32_t tmp_state = 0; + + tmp_state = hirda->State; + if((tmp_state == HAL_IRDA_STATE_READY) || (tmp_state == HAL_IRDA_STATE_BUSY_RX)) + { + if((pData == NULL) || (Size == 0)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hirda); + + hirda->ErrorCode = HAL_IRDA_ERROR_NONE; + if(hirda->State == HAL_IRDA_STATE_BUSY_RX) + { + hirda->State = HAL_IRDA_STATE_BUSY_TX_RX; + } + else + { + hirda->State = HAL_IRDA_STATE_BUSY_TX; + } + + hirda->TxXferSize = Size; + hirda->TxXferCount = Size; + while(hirda->TxXferCount > 0) + { + if(hirda->Init.WordLength == IRDA_WORDLENGTH_9B) + { + if(IRDA_WaitOnFlagUntilTimeout(hirda, IRDA_FLAG_TXE, RESET, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + tmp = (uint16_t*) pData; + WRITE_REG(hirda->Instance->DR,(*tmp & IRDA_DR_MASK_U16_9DATABITS)); + if(hirda->Init.Parity == IRDA_PARITY_NONE) + { + pData +=2; + } + else + { + pData +=1; + } + } + else + { + if(IRDA_WaitOnFlagUntilTimeout(hirda, IRDA_FLAG_TXE, RESET, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + WRITE_REG(hirda->Instance->DR, (*pData++ & IRDA_DR_MASK_U8_8DATABITS)); + } + hirda->TxXferCount--; + } + + if(IRDA_WaitOnFlagUntilTimeout(hirda, IRDA_FLAG_TC, RESET, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + + if(hirda->State == HAL_IRDA_STATE_BUSY_TX_RX) + { + hirda->State = HAL_IRDA_STATE_BUSY_RX; + } + else + { + hirda->State = HAL_IRDA_STATE_READY; + } + + /* Process Unlocked */ + __HAL_UNLOCK(hirda); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in blocking mode. + * @param hirda: Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @param pData: Pointer to data buffer + * @param Size: Amount of data to be received + * @param Timeout: Specify timeout value + * @retval HAL status + */ +HAL_StatusTypeDef HAL_IRDA_Receive(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + uint16_t* tmp = 0; + uint32_t tmp_state = 0; + + tmp_state = hirda->State; + if((tmp_state == HAL_IRDA_STATE_READY) || (tmp_state == HAL_IRDA_STATE_BUSY_TX)) + { + if((pData == NULL) || (Size == 0)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hirda); + + hirda->ErrorCode = HAL_IRDA_ERROR_NONE; + if(hirda->State == HAL_IRDA_STATE_BUSY_TX) + { + hirda->State = HAL_IRDA_STATE_BUSY_TX_RX; + } + else + { + hirda->State = HAL_IRDA_STATE_BUSY_RX; + } + hirda->RxXferSize = Size; + hirda->RxXferCount = Size; + /* Check the remain data to be received */ + while(hirda->RxXferCount > 0) + { + if(hirda->Init.WordLength == IRDA_WORDLENGTH_9B) + { + if(IRDA_WaitOnFlagUntilTimeout(hirda, IRDA_FLAG_RXNE, RESET, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + tmp = (uint16_t*) pData ; + if(hirda->Init.Parity == IRDA_PARITY_NONE) + { + *tmp = (uint16_t)(hirda->Instance->DR & IRDA_DR_MASK_U16_9DATABITS); + pData +=2; + } + else + { + *tmp = (uint16_t)(hirda->Instance->DR & IRDA_DR_MASK_U16_8DATABITS); + pData +=1; + } + } + else + { + if(IRDA_WaitOnFlagUntilTimeout(hirda, IRDA_FLAG_RXNE, RESET, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + if(hirda->Init.Parity == IRDA_PARITY_NONE) + { + *pData++ = (uint8_t)(hirda->Instance->DR & IRDA_DR_MASK_U8_8DATABITS); + } + else + { + *pData++ = (uint8_t)(hirda->Instance->DR & IRDA_DR_MASK_U8_7DATABITS); + } + } + hirda->RxXferCount--; + } + if(hirda->State == HAL_IRDA_STATE_BUSY_TX_RX) + { + hirda->State = HAL_IRDA_STATE_BUSY_TX; + } + else + { + hirda->State = HAL_IRDA_STATE_READY; + } + + /* Process Unlocked */ + __HAL_UNLOCK(hirda); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Sends an amount of data in non-blocking mode. + * @param hirda: Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @param pData: Pointer to data buffer + * @param Size: Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_IRDA_Transmit_IT(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size) +{ + uint32_t tmp_state = 0; + + tmp_state = hirda->State; + if((tmp_state == HAL_IRDA_STATE_READY) || (tmp_state == HAL_IRDA_STATE_BUSY_RX)) + { + if((pData == NULL) || (Size == 0)) + { + return HAL_ERROR; + } + /* Process Locked */ + __HAL_LOCK(hirda); + + hirda->pTxBuffPtr = pData; + hirda->TxXferSize = Size; + hirda->TxXferCount = Size; + + hirda->ErrorCode = HAL_IRDA_ERROR_NONE; + if(hirda->State == HAL_IRDA_STATE_BUSY_RX) + { + hirda->State = HAL_IRDA_STATE_BUSY_TX_RX; + } + else + { + hirda->State = HAL_IRDA_STATE_BUSY_TX; + } + + /* Process Unlocked */ + __HAL_UNLOCK(hirda); + + /* Enable the IRDA Error Interrupt: (Frame error, noise error, overrun error) */ + __HAL_IRDA_ENABLE_IT(hirda, IRDA_IT_ERR); + + /* Enable the IRDA Transmit Data Register Empty Interrupt */ + __HAL_IRDA_ENABLE_IT(hirda, IRDA_IT_TXE); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receives an amount of data in non-blocking mode. + * @param hirda: Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @param pData: Pointer to data buffer + * @param Size: Amount of data to be received + * @retval HAL status + */ +HAL_StatusTypeDef HAL_IRDA_Receive_IT(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size) +{ + uint32_t tmp_state = 0; + + tmp_state = hirda->State; + if((tmp_state == HAL_IRDA_STATE_READY) || (tmp_state == HAL_IRDA_STATE_BUSY_TX)) + { + if((pData == NULL) || (Size == 0)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hirda); + + hirda->pRxBuffPtr = pData; + hirda->RxXferSize = Size; + hirda->RxXferCount = Size; + + hirda->ErrorCode = HAL_IRDA_ERROR_NONE; + if(hirda->State == HAL_IRDA_STATE_BUSY_TX) + { + hirda->State = HAL_IRDA_STATE_BUSY_TX_RX; + } + else + { + hirda->State = HAL_IRDA_STATE_BUSY_RX; + } + + /* Process Unlocked */ + __HAL_UNLOCK(hirda); + + /* Enable the IRDA Data Register not empty Interrupt */ + __HAL_IRDA_ENABLE_IT(hirda, IRDA_IT_RXNE); + + /* Enable the IRDA Parity Error Interrupt */ + __HAL_IRDA_ENABLE_IT(hirda, IRDA_IT_PE); + + /* Enable the IRDA Error Interrupt: (Frame error, noise error, overrun error) */ + __HAL_IRDA_ENABLE_IT(hirda, IRDA_IT_ERR); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Sends an amount of data in non-blocking mode. + * @param hirda: Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @param pData: Pointer to data buffer + * @param Size: Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_IRDA_Transmit_DMA(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size) +{ + uint32_t *tmp = 0; + uint32_t tmp_state = 0; + + tmp_state = hirda->State; + if((tmp_state == HAL_IRDA_STATE_READY) || (tmp_state == HAL_IRDA_STATE_BUSY_RX)) + { + if((pData == NULL) || (Size == 0)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hirda); + + hirda->pTxBuffPtr = pData; + hirda->TxXferSize = Size; + hirda->TxXferCount = Size; + hirda->ErrorCode = HAL_IRDA_ERROR_NONE; + + if(hirda->State == HAL_IRDA_STATE_BUSY_RX) + { + hirda->State = HAL_IRDA_STATE_BUSY_TX_RX; + } + else + { + hirda->State = HAL_IRDA_STATE_BUSY_TX; + } + + /* Set the IRDA DMA transfer complete callback */ + hirda->hdmatx->XferCpltCallback = IRDA_DMATransmitCplt; + + /* Set the IRDA DMA half transfert complete callback */ + hirda->hdmatx->XferHalfCpltCallback = IRDA_DMATransmitHalfCplt; + + /* Set the DMA error callback */ + hirda->hdmatx->XferErrorCallback = IRDA_DMAError; + + /* Enable the IRDA transmit DMA channel */ + tmp = (uint32_t*)&pData; + HAL_DMA_Start_IT(hirda->hdmatx, *(uint32_t*)tmp, (uint32_t)&hirda->Instance->DR, Size); + + /* Clear the TC flag in the SR register by writing 0 to it */ + __HAL_IRDA_CLEAR_FLAG(hirda, IRDA_FLAG_TC); + + /* Enable the DMA transfer for transmit request by setting the DMAT bit + in the USART CR3 register */ + SET_BIT(hirda->Instance->CR3, USART_CR3_DMAT); + + /* Process Unlocked */ + __HAL_UNLOCK(hirda); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in non-blocking mode. + * @param hirda: Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @param pData: Pointer to data buffer + * @param Size: Amount of data to be received + * @note When the IRDA parity is enabled (PCE = 1) the data received contain the parity bit. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_IRDA_Receive_DMA(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size) +{ + uint32_t *tmp = 0; + uint32_t tmp_state = 0; + + tmp_state = hirda->State; + if((tmp_state == HAL_IRDA_STATE_READY) || (tmp_state == HAL_IRDA_STATE_BUSY_TX)) + { + if((pData == NULL) || (Size == 0)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hirda); + + hirda->pRxBuffPtr = pData; + hirda->RxXferSize = Size; + hirda->ErrorCode = HAL_IRDA_ERROR_NONE; + if(hirda->State == HAL_IRDA_STATE_BUSY_TX) + { + hirda->State = HAL_IRDA_STATE_BUSY_TX_RX; + } + else + { + hirda->State = HAL_IRDA_STATE_BUSY_RX; + } + + /* Set the IRDA DMA transfer complete callback */ + hirda->hdmarx->XferCpltCallback = IRDA_DMAReceiveCplt; + + /* Set the IRDA DMA half transfert complete callback */ + hirda->hdmarx->XferHalfCpltCallback = IRDA_DMAReceiveHalfCplt; + + /* Set the DMA error callback */ + hirda->hdmarx->XferErrorCallback = IRDA_DMAError; + + /* Enable the DMA channel */ + tmp = (uint32_t*)&pData; + HAL_DMA_Start_IT(hirda->hdmarx, (uint32_t)&hirda->Instance->DR, *(uint32_t*)tmp, Size); + + /* Enable the DMA transfer for the receiver request by setting the DMAR bit + in the USART CR3 register */ + SET_BIT(hirda->Instance->CR3, USART_CR3_DMAR); + + /* Process Unlocked */ + __HAL_UNLOCK(hirda); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Pauses the DMA Transfer. + * @param hirda: Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_IRDA_DMAPause(IRDA_HandleTypeDef *hirda) +{ + /* Process Locked */ + __HAL_LOCK(hirda); + + if(hirda->State == HAL_IRDA_STATE_BUSY_TX) + { + /* Disable the IRDA DMA Tx request */ + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAT); + } + else if(hirda->State == HAL_IRDA_STATE_BUSY_RX) + { + /* Disable the IRDA DMA Rx request */ + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAR); + } + else if (hirda->State == HAL_IRDA_STATE_BUSY_TX_RX) + { + /* Disable the IRDA DMA Tx & Rx requests */ + CLEAR_BIT(hirda->Instance->CR3, (USART_CR3_DMAT | USART_CR3_DMAR)); + } + else + { + /* Process Unlocked */ + __HAL_UNLOCK(hirda); + + return HAL_ERROR; + } + + /* Process Unlocked */ + __HAL_UNLOCK(hirda); + + return HAL_OK; +} + +/** + * @brief Resumes the DMA Transfer. + * @param hirda: Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_IRDA_DMAResume(IRDA_HandleTypeDef *hirda) +{ + /* Process Locked */ + __HAL_LOCK(hirda); + + if(hirda->State == HAL_IRDA_STATE_BUSY_TX) + { + /* Enable the IRDA DMA Tx request */ + SET_BIT(hirda->Instance->CR3, USART_CR3_DMAT); + } + else if(hirda->State == HAL_IRDA_STATE_BUSY_RX) + { + /* Clear the Overrun flag before resumming the Rx transfer*/ + __HAL_IRDA_CLEAR_OREFLAG(hirda); + /* Enable the IRDA DMA Rx request */ + SET_BIT(hirda->Instance->CR3, USART_CR3_DMAR); + } + else if(hirda->State == HAL_IRDA_STATE_BUSY_TX_RX) + { + /* Clear the Overrun flag before resumming the Rx transfer*/ + __HAL_IRDA_CLEAR_OREFLAG(hirda); + /* Enable the IRDA DMA Tx & Rx request */ + SET_BIT(hirda->Instance->CR3, (USART_CR3_DMAT | USART_CR3_DMAR)); + } + else + { + /* Process Unlocked */ + __HAL_UNLOCK(hirda); + + return HAL_ERROR; + } + + /* Process Unlocked */ + __HAL_UNLOCK(hirda); + + return HAL_OK; +} + +/** + * @brief Stops the DMA Transfer. + * @param hirda: Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_IRDA_DMAStop(IRDA_HandleTypeDef *hirda) +{ + /* The Lock is not implemented on this API to allow the user application + to call the HAL IRDA API under callbacks HAL_IRDA_TxCpltCallback() / HAL_IRDA_RxCpltCallback(): + when calling HAL_DMA_Abort() API the DMA TX/RX Transfer complete interrupt is generated + and the correspond call back is executed HAL_IRDA_TxCpltCallback() / HAL_IRDA_RxCpltCallback() + */ + + /* Disable the IRDA Tx/Rx DMA requests */ + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAT); + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAR); + + /* Abort the IRDA DMA tx channel */ + if(hirda->hdmatx != NULL) + { + HAL_DMA_Abort(hirda->hdmatx); + } + /* Abort the IRDA DMA rx channel */ + if(hirda->hdmarx != NULL) + { + HAL_DMA_Abort(hirda->hdmarx); + } + + hirda->State = HAL_IRDA_STATE_READY; + + return HAL_OK; +} + +/** + * @brief This function handles IRDA interrupt request. + * @param hirda: Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval None + */ +void HAL_IRDA_IRQHandler(IRDA_HandleTypeDef *hirda) +{ + uint32_t tmp_flag = 0, tmp_it_source = 0; + + tmp_flag = __HAL_IRDA_GET_FLAG(hirda, IRDA_FLAG_PE); + tmp_it_source = __HAL_IRDA_GET_IT_SOURCE(hirda, IRDA_IT_PE); + /* IRDA parity error interrupt occurred -----------------------------------*/ + if((tmp_flag != RESET) && (tmp_it_source != RESET)) + { + hirda->ErrorCode |= HAL_IRDA_ERROR_PE; + } + + tmp_flag = __HAL_IRDA_GET_FLAG(hirda, IRDA_FLAG_FE); + tmp_it_source = __HAL_IRDA_GET_IT_SOURCE(hirda, IRDA_IT_ERR); + /* IRDA frame error interrupt occurred ------------------------------------*/ + if((tmp_flag != RESET) && (tmp_it_source != RESET)) + { + hirda->ErrorCode |= HAL_IRDA_ERROR_FE; + } + + tmp_flag = __HAL_IRDA_GET_FLAG(hirda, IRDA_FLAG_NE); + /* IRDA noise error interrupt occurred ------------------------------------*/ + if((tmp_flag != RESET) && (tmp_it_source != RESET)) + { + hirda->ErrorCode |= HAL_IRDA_ERROR_NE; + } + + tmp_flag = __HAL_IRDA_GET_FLAG(hirda, IRDA_FLAG_ORE); + /* IRDA Over-Run interrupt occurred ---------------------------------------*/ + if((tmp_flag != RESET) && (tmp_it_source != RESET)) + { + hirda->ErrorCode |= HAL_IRDA_ERROR_ORE; + } + + /* Call the Error call Back in case of Errors */ + if(hirda->ErrorCode != HAL_IRDA_ERROR_NONE) + { + /* Disable PE and ERR interrupt */ + __HAL_IRDA_DISABLE_IT(hirda, IRDA_IT_ERR); + __HAL_IRDA_DISABLE_IT(hirda, IRDA_IT_PE); + __HAL_IRDA_DISABLE_IT(hirda, IRDA_IT_TXE); + + /* Clear all the error flag at once */ + __HAL_IRDA_CLEAR_PEFLAG(hirda); + + /* Set the IRDA state ready to be able to start again the process */ + hirda->State = HAL_IRDA_STATE_READY; + HAL_IRDA_ErrorCallback(hirda); + } + + tmp_flag = __HAL_IRDA_GET_FLAG(hirda, IRDA_FLAG_RXNE); + tmp_it_source = __HAL_IRDA_GET_IT_SOURCE(hirda, IRDA_IT_RXNE); + /* IRDA in mode Receiver --------------------------------------------------*/ + if((tmp_flag != RESET) && (tmp_it_source != RESET)) + { + IRDA_Receive_IT(hirda); + } + + tmp_flag = __HAL_IRDA_GET_FLAG(hirda, IRDA_FLAG_TXE); + tmp_it_source = __HAL_IRDA_GET_IT_SOURCE(hirda, IRDA_IT_TXE); + /* IRDA in mode Transmitter -----------------------------------------------*/ + if((tmp_flag != RESET) && (tmp_it_source != RESET)) + { + IRDA_Transmit_IT(hirda); + } + + tmp_flag = __HAL_IRDA_GET_FLAG(hirda, IRDA_FLAG_TC); + tmp_it_source = __HAL_IRDA_GET_IT_SOURCE(hirda, IRDA_IT_TC); + /* IRDA in mode Transmitter (transmission end) -----------------------------*/ + if((tmp_flag != RESET) && (tmp_it_source != RESET)) + { + IRDA_EndTransmit_IT(hirda); + } + +} + +/** + * @brief Tx Transfer completed callbacks. + * @param hirda: Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval None + */ + __weak void HAL_IRDA_TxCpltCallback(IRDA_HandleTypeDef *hirda) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hirda); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_IRDA_TxCpltCallback can be implemented in the user file + */ +} + +/** + * @brief Tx Half Transfer completed callbacks. + * @param hirda: Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified USART module. + * @retval None + */ + __weak void HAL_IRDA_TxHalfCpltCallback(IRDA_HandleTypeDef *hirda) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hirda); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_IRDA_TxHalfCpltCallback can be implemented in the user file + */ +} + +/** + * @brief Rx Transfer completed callbacks. + * @param hirda: Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval None + */ +__weak void HAL_IRDA_RxCpltCallback(IRDA_HandleTypeDef *hirda) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hirda); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_IRDA_RxCpltCallback can be implemented in the user file + */ +} + +/** + * @brief Rx Half Transfer complete callbacks. + * @param hirda: Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval None + */ +__weak void HAL_IRDA_RxHalfCpltCallback(IRDA_HandleTypeDef *hirda) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hirda); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_IRDA_RxHalfCpltCallback can be implemented in the user file + */ +} + +/** + * @brief IRDA error callbacks. + * @param hirda: Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval None + */ + __weak void HAL_IRDA_ErrorCallback(IRDA_HandleTypeDef *hirda) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hirda); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_IRDA_ErrorCallback can be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup IRDA_Exported_Functions_Group3 Peripheral State and Errors functions + * @brief IRDA State and Errors functions + * +@verbatim + ============================================================================== + ##### Peripheral State and Errors functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to return the State of IrDA + communication process and also return Peripheral Errors occurred during communication process + (+) HAL_IRDA_GetState() API can be helpful to check in run-time the state + of the IRDA peripheral. + (+) HAL_IRDA_GetError() check in run-time errors that could be occurred during + communication. + +@endverbatim + * @{ + */ + +/** + * @brief Returns the IRDA state. + * @param hirda: Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval HAL state + */ +HAL_IRDA_StateTypeDef HAL_IRDA_GetState(IRDA_HandleTypeDef *hirda) +{ + return hirda->State; +} + +/** + * @brief Return the IRDA error code + * @param hirda: Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval IRDA Error Code + */ +uint32_t HAL_IRDA_GetError(IRDA_HandleTypeDef *hirda) +{ + return hirda->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup IRDA_Private_Functions IRDA Private Functions + * @brief IRDA Private functions + * @{ + */ +/** + * @brief DMA IRDA transmit process complete callback. + * @param hdma: Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void IRDA_DMATransmitCplt(DMA_HandleTypeDef *hdma) +{ + IRDA_HandleTypeDef* hirda = ( IRDA_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; + /* DMA Normal mode */ + if ( HAL_IS_BIT_CLR(hdma->Instance->CCR, DMA_CCR_CIRC) ) + { + hirda->TxXferCount = 0; + + /* Disable the DMA transfer for transmit request by setting the DMAT bit + in the IRDA CR3 register */ + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAT); + + /* Enable the IRDA Transmit Complete Interrupt */ + __HAL_IRDA_ENABLE_IT(hirda, IRDA_IT_TC); + } + /* DMA Circular mode */ + else + { + HAL_IRDA_TxCpltCallback(hirda); + } +} + +/** + * @brief DMA IRDA receive process half complete callback + * @param hdma: Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void IRDA_DMATransmitHalfCplt(DMA_HandleTypeDef *hdma) +{ + IRDA_HandleTypeDef* hirda = ( IRDA_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; + + HAL_IRDA_TxHalfCpltCallback(hirda); +} + +/** + * @brief DMA IRDA receive process complete callback. + * @param hdma: Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void IRDA_DMAReceiveCplt(DMA_HandleTypeDef *hdma) +{ + IRDA_HandleTypeDef* hirda = ( IRDA_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; + /* DMA Normal mode */ + if ( HAL_IS_BIT_CLR(hdma->Instance->CCR, DMA_CCR_CIRC) ) + { + hirda->RxXferCount = 0; + + /* Disable the DMA transfer for the receiver request by setting the DMAR bit + in the IRDA CR3 register */ + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAR); + + if(hirda->State == HAL_IRDA_STATE_BUSY_TX_RX) + { + hirda->State = HAL_IRDA_STATE_BUSY_TX; + } + else + { + hirda->State = HAL_IRDA_STATE_READY; + } + } + + HAL_IRDA_RxCpltCallback(hirda); +} + +/** + * @brief DMA IRDA receive process half complete callback + * @param hdma: Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void IRDA_DMAReceiveHalfCplt(DMA_HandleTypeDef *hdma) +{ + IRDA_HandleTypeDef* hirda = ( IRDA_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; + + HAL_IRDA_RxHalfCpltCallback(hirda); +} + +/** + * @brief DMA IRDA communication error callback. + * @param hdma: Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void IRDA_DMAError(DMA_HandleTypeDef *hdma) +{ + IRDA_HandleTypeDef* hirda = ( IRDA_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; + + hirda->RxXferCount = 0; + hirda->TxXferCount = 0; + hirda->ErrorCode |= HAL_IRDA_ERROR_DMA; + hirda->State= HAL_IRDA_STATE_READY; + + HAL_IRDA_ErrorCallback(hirda); +} + +/** + * @brief This function handles IRDA Communication Timeout. + * @param hirda: Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @param Flag: specifies the IRDA flag to check. + * @param Status: The new Flag status (SET or RESET). + * @param Timeout: Timeout duration + * @retval HAL status + */ +static HAL_StatusTypeDef IRDA_WaitOnFlagUntilTimeout(IRDA_HandleTypeDef *hirda, uint32_t Flag, FlagStatus Status, uint32_t Timeout) +{ + uint32_t tickstart = 0; + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Wait until flag is set */ + if(Status == RESET) + { + while(__HAL_IRDA_GET_FLAG(hirda, Flag) == RESET) + { + /* Check for the Timeout */ + if(Timeout != HAL_MAX_DELAY) + { + if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout)) + { + /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */ + __HAL_IRDA_DISABLE_IT(hirda, IRDA_IT_TXE); + __HAL_IRDA_DISABLE_IT(hirda, IRDA_IT_RXNE); + __HAL_IRDA_DISABLE_IT(hirda, IRDA_IT_PE); + __HAL_IRDA_DISABLE_IT(hirda, IRDA_IT_ERR); + + hirda->State= HAL_IRDA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hirda); + + return HAL_TIMEOUT; + } + } + } + } + else + { + while(__HAL_IRDA_GET_FLAG(hirda, Flag) != RESET) + { + /* Check for the Timeout */ + if(Timeout != HAL_MAX_DELAY) + { + if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout)) + { + /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */ + __HAL_IRDA_DISABLE_IT(hirda, IRDA_IT_TXE); + __HAL_IRDA_DISABLE_IT(hirda, IRDA_IT_RXNE); + __HAL_IRDA_DISABLE_IT(hirda, IRDA_IT_PE); + __HAL_IRDA_DISABLE_IT(hirda, IRDA_IT_ERR); + + hirda->State= HAL_IRDA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hirda); + + return HAL_TIMEOUT; + } + } + } + } + return HAL_OK; +} + +/** + * @brief Send an amount of data in non-blocking mode. + * Function called under interruption only, once + * interruptions have been enabled by HAL_IRDA_Transmit_IT() + * @param hirda: Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval HAL status + */ +static HAL_StatusTypeDef IRDA_Transmit_IT(IRDA_HandleTypeDef *hirda) +{ + uint16_t* tmp = 0; + uint32_t tmp_state = 0; + + tmp_state = hirda->State; + if((tmp_state == HAL_IRDA_STATE_BUSY_TX) || (tmp_state == HAL_IRDA_STATE_BUSY_TX_RX)) + { + if(hirda->Init.WordLength == IRDA_WORDLENGTH_9B) + { + tmp = (uint16_t*) hirda->pTxBuffPtr; + WRITE_REG(hirda->Instance->DR, (uint16_t)(*tmp & IRDA_DR_MASK_U16_9DATABITS)); + if(hirda->Init.Parity == IRDA_PARITY_NONE) + { + hirda->pTxBuffPtr += 2; + } + else + { + hirda->pTxBuffPtr += 1; + } + } + else + { + WRITE_REG(hirda->Instance->DR, (uint8_t)(*hirda->pTxBuffPtr++ & IRDA_DR_MASK_U8_8DATABITS)); + } + + if(--hirda->TxXferCount == 0) + { + /* Disable the IRDA Transmit Data Register Empty Interrupt */ + __HAL_IRDA_DISABLE_IT(hirda, IRDA_IT_TXE); + + /* Enable the IRDA Transmit Complete Interrupt */ + __HAL_IRDA_ENABLE_IT(hirda, IRDA_IT_TC); + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Wraps up transmission in non blocking mode. + * @param hirda: pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval HAL status + */ +static HAL_StatusTypeDef IRDA_EndTransmit_IT(IRDA_HandleTypeDef *hirda) +{ + /* Disable the IRDA Transmit Complete Interrupt */ + __HAL_IRDA_DISABLE_IT(hirda, IRDA_IT_TC); + + /* Check if a receive process is ongoing or not */ + if(hirda->State == HAL_IRDA_STATE_BUSY_TX_RX) + { + hirda->State = HAL_IRDA_STATE_BUSY_RX; + } + else + { + /* Disable the IRDA Error Interrupt: (Frame error, noise error, overrun error) */ + __HAL_IRDA_DISABLE_IT(hirda, IRDA_IT_ERR); + + hirda->State = HAL_IRDA_STATE_READY; + } + + HAL_IRDA_TxCpltCallback(hirda); + + return HAL_OK; +} + + +/** + * @brief Receive an amount of data in non-blocking mode. + * @param hirda: Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval HAL status + */ +static HAL_StatusTypeDef IRDA_Receive_IT(IRDA_HandleTypeDef *hirda) +{ + uint16_t* tmp = 0; + uint32_t tmp_state = 0; + + tmp_state = hirda->State; + if((tmp_state == HAL_IRDA_STATE_BUSY_RX) || (tmp_state == HAL_IRDA_STATE_BUSY_TX_RX)) + { + if(hirda->Init.WordLength == IRDA_WORDLENGTH_9B) + { + tmp = (uint16_t*) hirda->pRxBuffPtr; + if(hirda->Init.Parity == IRDA_PARITY_NONE) + { + *tmp = (uint16_t)(hirda->Instance->DR & IRDA_DR_MASK_U16_9DATABITS); + hirda->pRxBuffPtr += 2; + } + else + { + *tmp = (uint16_t)(hirda->Instance->DR & IRDA_DR_MASK_U16_8DATABITS); + hirda->pRxBuffPtr += 1; + } + } + else + { + if(hirda->Init.Parity == IRDA_PARITY_NONE) + { + *hirda->pRxBuffPtr++ = (uint8_t)(hirda->Instance->DR & IRDA_DR_MASK_U8_8DATABITS); + } + else + { + *hirda->pRxBuffPtr++ = (uint8_t)(hirda->Instance->DR & IRDA_DR_MASK_U8_7DATABITS); + } + } + + if(--hirda->RxXferCount == 0) + { + + __HAL_IRDA_DISABLE_IT(hirda, IRDA_IT_RXNE); + + if(hirda->State == HAL_IRDA_STATE_BUSY_TX_RX) + { + hirda->State = HAL_IRDA_STATE_BUSY_TX; + } + else + { + /* Disable the IRDA Parity Error Interrupt */ + __HAL_IRDA_DISABLE_IT(hirda, IRDA_IT_PE); + + /* Disable the IRDA Error Interrupt: (Frame error, noise error, overrun error) */ + __HAL_IRDA_DISABLE_IT(hirda, IRDA_IT_ERR); + + hirda->State = HAL_IRDA_STATE_READY; + } + HAL_IRDA_RxCpltCallback(hirda); + + return HAL_OK; + } + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Configures the IRDA peripheral. + * @param hirda: Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval None + */ +static void IRDA_SetConfig(IRDA_HandleTypeDef *hirda) +{ + /* Check the parameters */ + assert_param(IS_IRDA_BAUDRATE(hirda->Init.BaudRate)); + assert_param(IS_IRDA_WORD_LENGTH(hirda->Init.WordLength)); + assert_param(IS_IRDA_PARITY(hirda->Init.Parity)); + assert_param(IS_IRDA_MODE(hirda->Init.Mode)); + + /*------- IRDA-associated USART registers setting : CR2 Configuration ------*/ + /* Clear STOP[13:12] bits */ + CLEAR_BIT(hirda->Instance->CR2, USART_CR2_STOP); + + /*------- IRDA-associated USART registers setting : CR1 Configuration ------*/ + /* Configure the USART Word Length, Parity and mode: + Set the M bits according to hirda->Init.WordLength value + Set PCE and PS bits according to hirda->Init.Parity value + Set TE and RE bits according to hirda->Init.Mode value */ + MODIFY_REG(hirda->Instance->CR1, + ((uint32_t)(USART_CR1_M | USART_CR1_PCE | USART_CR1_PS | USART_CR1_TE | USART_CR1_RE)), + (uint32_t)hirda->Init.WordLength | hirda->Init.Parity | hirda->Init.Mode); + + /*------- IRDA-associated USART registers setting : CR3 Configuration ------*/ + /* Clear CTSE and RTSE bits */ + CLEAR_BIT(hirda->Instance->CR3, (USART_CR3_RTSE | USART_CR3_CTSE)); + + /*------- IRDA-associated USART registers setting : BRR Configuration ------*/ + if(hirda->Instance == USART1) + { + hirda->Instance->BRR = IRDA_BRR(HAL_RCC_GetPCLK2Freq(), hirda->Init.BaudRate); + } + else + { + hirda->Instance->BRR = IRDA_BRR(HAL_RCC_GetPCLK1Freq(), hirda->Init.BaudRate); + } +} +/** + * @} + */ + +#endif /* HAL_IRDA_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_iwdg.c b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_iwdg.c new file mode 100755 index 0000000..5a7df62 --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_iwdg.c @@ -0,0 +1,263 @@ +/** + ****************************************************************************** + * @file stm32l1xx_hal_iwdg.c + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief IWDG HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Independent Watchdog (IWDG) peripheral: + * + Initialization and Start functions + * + IO operation functions + * + @verbatim + ============================================================================== + ##### IWDG Generic features ##### + ============================================================================== + [..] + (+) The IWDG can be started by either software or hardware (configurable + through option byte). + + (+) The IWDG is clocked by Low-Speed clock (LSI) and thus stays active even + if the main clock fails. + + (+) Once the IWDG is started, the LSI is forced ON and both can not be + disabled. The counter starts counting down from the reset value (0xFFF). + When it reaches the end of count value (0x000) a reset signal is + generated (IWDG reset). + + (+) Whenever the key value 0x0000 AAAA is written in the IWDG_KR register, + the IWDG_RLR value is reloaded in the counter and the watchdog reset is + prevented. + + (+) The IWDG is implemented in the VDD voltage domain that is still functional + in STOP and STANDBY mode (IWDG reset can wake-up from STANDBY). + IWDGRST flag in RCC_CSR register can be used to inform when an IWDG + reset occurs. + + (+) Debug mode : When the microcontroller enters debug mode (core halted), + the IWDG counter either continues to work normally or stops, depending + on DBG_IWDG_STOP configuration bit in DBG module, accessible through + __HAL_DBGMCU_FREEZE_IWDG() and __HAL_DBGMCU_UNFREEZE_IWDG() macros + + (+) Min-max timeout value @37KHz (LSI): ~108us / ~28.3s + The IWDG timeout may vary due to LSI frequency dispersion. STM32L1xx + devices provide the capability to measure the LSI frequency (LSI clock + connected internally to TIM10 CH1 input capture). The measured value + can be used to have an IWDG timeout with an acceptable accuracy. + For more information, please refer to the STM32L1xx Reference manual. + + ##### How to use this driver ##### + ============================================================================== + [..] + (#) Use IWDG using HAL_IWDG_Init() function to : + (++) Enable instance by writing Start keyword in IWDG_KEY register. LSI + clock is forced ON and IWDG counter starts downcounting. + (++) Enable write access to configuration register: IWDG_PR, IWDG_RLR. + (++) Configure the IWDG prescaler and counter reload value. This reload + value will be loaded in the IWDG counter each time the watchdog is + reloaded, then the IWDG will start counting down from this value. + (++) wait for status flags to be reset" + + (#) Then the application program must refresh the IWDG counter at regular + intervals during normal operation to prevent an MCU reset, using + HAL_IWDG_Refresh() function. + + *** IWDG HAL driver macros list *** + ==================================== + [..] + Below the list of most used macros in IWDG HAL driver: + (+) __HAL_IWDG_START: Enable the IWDG peripheral + (+) __HAL_IWDG_RELOAD_COUNTER: Reloads IWDG counter with value defined in + the reload register + + @endverbatim + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_hal.h" + +/** @addtogroup STM32L1xx_HAL_Driver + * @{ + */ + +#ifdef HAL_IWDG_MODULE_ENABLED +/** @addtogroup IWDG + * @brief IWDG HAL module driver. + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup IWDG_Private_Defines IWDG Private Defines + * @{ + */ +/* Status register need 5 RC LSI divided by prescaler clock to be updated. With + higher prescaler (256), and according to HSI variation, we need to wait at + least 6 cycles so 48 ms. */ +#define HAL_IWDG_DEFAULT_TIMEOUT 48u +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup IWDG_Exported_Functions + * @{ + */ + +/** @addtogroup IWDG_Exported_Functions_Group1 + * @brief Initialization and Start functions. + * +@verbatim + =============================================================================== + ##### Initialization and Start functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Initialize the IWDG according to the specified parameters in the + IWDG_InitTypeDef of associated handle. + (+) Once initialization is performed in HAL_IWDG_Init function, Watchdog + is reloaded in order to exit function with correct time base. + +@endverbatim + * @{ + */ + +/** + * @brief Initialize the IWDG according to the specified parameters in the + * IWDG_InitTypeDef and start watchdog. Before exiting function, + * watchdog is refreshed in order to have correct time base. + * @param hiwdg pointer to a IWDG_HandleTypeDef structure that contains + * the configuration information for the specified IWDG module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_IWDG_Init(IWDG_HandleTypeDef *hiwdg) +{ + uint32_t tickstart; + + /* Check the IWDG handle allocation */ + if(hiwdg == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_IWDG_ALL_INSTANCE(hiwdg->Instance)); + assert_param(IS_IWDG_PRESCALER(hiwdg->Init.Prescaler)); + assert_param(IS_IWDG_RELOAD(hiwdg->Init.Reload)); + + /* Enable IWDG. LSI is turned on automaticaly */ + __HAL_IWDG_START(hiwdg); + + /* Enable write access to IWDG_PR, IWDG_RLR registers by writing + 0x5555 in KR */ + IWDG_ENABLE_WRITE_ACCESS(hiwdg); + + /* Write to IWDG registers the Prescaler & Reload values to work with */ + hiwdg->Instance->PR = hiwdg->Init.Prescaler; + hiwdg->Instance->RLR = hiwdg->Init.Reload; + + /* Check pending flag, if previous update not done, return timeout */ + tickstart = HAL_GetTick(); + + /* Wait for register to be updated */ + while(hiwdg->Instance->SR != RESET) + { + if((HAL_GetTick() - tickstart ) > HAL_IWDG_DEFAULT_TIMEOUT) + { + return HAL_TIMEOUT; + } + } + + /* Reload IWDG counter with value defined in the reload register */ + __HAL_IWDG_RELOAD_COUNTER(hiwdg); + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + + +/** @addtogroup IWDG_Exported_Functions_Group2 + * @brief IO operation functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Refresh the IWDG. + +@endverbatim + * @{ + */ + + +/** + * @brief Refresh the IWDG. + * @param hiwdg pointer to a IWDG_HandleTypeDef structure that contains + * the configuration information for the specified IWDG module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_IWDG_Refresh(IWDG_HandleTypeDef *hiwdg) +{ + /* Reload IWDG counter with value defined in the reload register */ + __HAL_IWDG_RELOAD_COUNTER(hiwdg); + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_IWDG_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_lcd.c b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_lcd.c new file mode 100755 index 0000000..289eff5 --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_lcd.c @@ -0,0 +1,633 @@ +/** + ****************************************************************************** + * @file stm32l1xx_hal_lcd.c + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief LCD Controller HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the LCD Controller (LCD) peripheral: + * + Initialization/de-initialization methods + * + I/O operation methods + * + Peripheral State methods + * + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] The LCD HAL driver can be used as follows: + + (#) Declare a LCD_HandleTypeDef handle structure. + + (#) Initialize the LCD low level resources by implement the HAL_LCD_MspInit() API: + (##) Enable the LCDCLK (same as RTCCLK): to configure the RTCCLK/LCDCLK, proceed as follows: + (+++) Use RCC function HAL_RCCEx_PeriphCLKConfig in indicating RCC_PERIPHCLK_LCD and + selected clock source (HSE, LSI or LSE) + (+++) The frequency generator allows you to achieve various LCD frame rates + starting from an LCD input clock frequency (LCDCLK) which can vary + from 32 kHz up to 1 MHz. + (##) LCD pins configuration: + (+++) Enable the clock for the LCD GPIOs. + (+++) Configure these LCD pins as alternate function no-pull. + (##) Enable the LCD interface clock. + + (#) Program the Prescaler, Divider, Blink mode, Blink Frequency Duty, Bias, + Voltage Source, Dead Time, Pulse On Duration and Contrast in the hlcd Init structure. + + (#) Initialize the LCD registers by calling the HAL_LCD_Init() API. + + -@- The HAL_LCD_Init() API configures also the low level Hardware GPIO, CLOCK, ...etc) + by calling the custumed HAL_LCD_MspInit() API. + -@- After calling the HAL_LCD_Init() the LCD RAM memory is cleared + + (#) Optionally you can update the LCD configuration using these macros: + (++) LCD High Drive using the __HAL_LCD_HIGHDRIVER_ENABLE() and __HAL_LCD_HIGHDRIVER_DISABLE() macros + (++) LCD Pulse ON Duration using the __HAL_LCD_PULSEONDURATION_CONFIG() macro + (++) LCD Dead Time using the __HAL_LCD_DEADTIME_CONFIG() macro + (++) The LCD Blink mode and frequency using the __HAL_LCD_BLINK_CONFIG() macro + (++) The LCD Contrast using the __HAL_LCD_CONTRAST_CONFIG() macro + + (#) Write to the LCD RAM memory using the HAL_LCD_Write() API, this API can be called + more time to update the different LCD RAM registers before calling + HAL_LCD_UpdateDisplayRequest() API. + + (#) The HAL_LCD_Clear() API can be used to clear the LCD RAM memory. + + (#) When LCD RAM memory is updated enable the update display request using + the HAL_LCD_UpdateDisplayRequest() API. + + [..] LCD and low power modes: + (#) The LCD remain active during STOP mode. + + @endverbatim + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_hal.h" + +/** @addtogroup STM32L1xx_HAL_Driver + * @{ + */ + +#ifdef HAL_LCD_MODULE_ENABLED + +#if defined (STM32L100xB) || defined (STM32L100xBA) || defined (STM32L100xC) ||\ + defined (STM32L152xB) || defined (STM32L152xBA) || defined (STM32L152xC) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L152xE) || defined (STM32L152xDX) ||\ + defined (STM32L162xC) || defined (STM32L162xCA) || defined (STM32L162xD) || defined (STM32L162xE) || defined (STM32L162xDX) + +/** @defgroup LCD LCD + * @brief LCD HAL module driver + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup LCD_Private_Defines LCD Private Defines + * @{ + */ + +#define LCD_TIMEOUT_VALUE 1000 + +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup LCD_Exported_Functions LCD Exported Functions + * @{ + */ + +/** @defgroup LCD_Exported_Functions_Group1 Initialization/de-initialization methods + * @brief Initialization and Configuration functions + * +@verbatim +=============================================================================== + ##### Initialization and Configuration functions ##### + =============================================================================== + [..] + +@endverbatim + * @{ + */ + +/** + * @brief DeInitializes the LCD peripheral. + * @param hlcd: LCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LCD_DeInit(LCD_HandleTypeDef *hlcd) +{ + /* Check the LCD handle allocation */ + if(hlcd == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_LCD_ALL_INSTANCE(hlcd->Instance)); + + /* Check the LCD peripheral state */ + if(hlcd->State == HAL_LCD_STATE_BUSY) + { + return HAL_BUSY; + } + + hlcd->State = HAL_LCD_STATE_BUSY; + + /* Disable the peripheral */ + __HAL_LCD_DISABLE(hlcd); + + /*Disable Highdrive by default*/ + __HAL_LCD_HIGHDRIVER_DISABLE(hlcd); + + /* DeInit the low level hardware */ + HAL_LCD_MspDeInit(hlcd); + + hlcd->ErrorCode = HAL_LCD_ERROR_NONE; + hlcd->State = HAL_LCD_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(hlcd); + + return HAL_OK; +} + +/** + * @brief Initializes the LCD peripheral according to the specified parameters + * in the LCD_InitStruct. + * @note This function can be used only when the LCD is disabled. + * The LCD HighDrive can be enabled/disabled using related macros up to user. + * @param hlcd: LCD handle + * @retval None + */ +HAL_StatusTypeDef HAL_LCD_Init(LCD_HandleTypeDef *hlcd) +{ + uint32_t tickstart = 0x00; + uint8_t counter = 0; + + /* Check the LCD handle allocation */ + if(hlcd == NULL) + { + return HAL_ERROR; + } + + /* Check function parameters */ + assert_param(IS_LCD_ALL_INSTANCE(hlcd->Instance)); + assert_param(IS_LCD_PRESCALER(hlcd->Init.Prescaler)); + assert_param(IS_LCD_DIVIDER(hlcd->Init.Divider)); + assert_param(IS_LCD_DUTY(hlcd->Init.Duty)); + assert_param(IS_LCD_BIAS(hlcd->Init.Bias)); + assert_param(IS_LCD_VOLTAGE_SOURCE(hlcd->Init.VoltageSource)); + assert_param(IS_LCD_PULSE_ON_DURATION(hlcd->Init.PulseOnDuration)); + assert_param(IS_LCD_HIGHDRIVE(hlcd->Init.HighDrive)); + assert_param(IS_LCD_DEAD_TIME(hlcd->Init.DeadTime)); + assert_param(IS_LCD_CONTRAST(hlcd->Init.Contrast)); + assert_param(IS_LCD_BLINK_FREQUENCY(hlcd->Init.BlinkFrequency)); + assert_param(IS_LCD_BLINK_MODE(hlcd->Init.BlinkMode)); + assert_param(IS_LCD_MUXSEGMENT(hlcd->Init.MuxSegment)); + + if(hlcd->State == HAL_LCD_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hlcd->Lock = HAL_UNLOCKED; + + /* Initialize the low level hardware (MSP) */ + HAL_LCD_MspInit(hlcd); + } + + hlcd->State = HAL_LCD_STATE_BUSY; + + /* Disable the peripheral */ + __HAL_LCD_DISABLE(hlcd); + + /* Clear the LCD_RAM registers and enable the display request by setting the UDR bit + in the LCD_SR register */ + for(counter = LCD_RAM_REGISTER0; counter <= LCD_RAM_REGISTER15; counter++) + { + hlcd->Instance->RAM[counter] = 0; + } + /* Enable the display request */ + SET_BIT(hlcd->Instance->SR, LCD_SR_UDR); + + /* Configure the LCD Prescaler, Divider, Blink mode and Blink Frequency: + Set PS[3:0] bits according to hlcd->Init.Prescaler value + Set DIV[3:0] bits according to hlcd->Init.Divider value + Set BLINK[1:0] bits according to hlcd->Init.BlinkMode value + Set BLINKF[2:0] bits according to hlcd->Init.BlinkFrequency value + Set DEAD[2:0] bits according to hlcd->Init.DeadTime value + Set PON[2:0] bits according to hlcd->Init.PulseOnDuration value + Set CC[2:0] bits according to hlcd->Init.Contrast value + Set HD[0] bit according to hlcd->Init.HighDrive value */ + MODIFY_REG(hlcd->Instance->FCR, \ + (LCD_FCR_PS | LCD_FCR_DIV | LCD_FCR_BLINK| LCD_FCR_BLINKF | \ + LCD_FCR_DEAD | LCD_FCR_PON | LCD_FCR_CC), \ + (hlcd->Init.Prescaler | hlcd->Init.Divider | hlcd->Init.BlinkMode | hlcd->Init.BlinkFrequency | \ + hlcd->Init.DeadTime | hlcd->Init.PulseOnDuration | hlcd->Init.Contrast | hlcd->Init.HighDrive)); + + /* Wait until LCD Frame Control Register Synchronization flag (FCRSF) is set in the LCD_SR register + This bit is set by hardware each time the LCD_FCR register is updated in the LCDCLK + domain. It is cleared by hardware when writing to the LCD_FCR register.*/ + LCD_WaitForSynchro(hlcd); + + /* Configure the LCD Duty, Bias, Voltage Source, Dead Time: + Set DUTY[2:0] bits according to hlcd->Init.Duty value + Set BIAS[1:0] bits according to hlcd->Init.Bias value + Set VSEL bit according to hlcd->Init.VoltageSource value + Set MUX_SEG bit according to hlcd->Init.MuxSegment value */ + MODIFY_REG(hlcd->Instance->CR, \ + (LCD_CR_DUTY | LCD_CR_BIAS | LCD_CR_VSEL | LCD_CR_MUX_SEG), \ + (hlcd->Init.Duty | hlcd->Init.Bias | hlcd->Init.VoltageSource | hlcd->Init.MuxSegment)); + + /* Enable the peripheral */ + __HAL_LCD_ENABLE(hlcd); + + /* Get timeout */ + tickstart = HAL_GetTick(); + + /* Wait Until the LCD is enabled */ + while(__HAL_LCD_GET_FLAG(hlcd, LCD_FLAG_ENS) == RESET) + { + if((HAL_GetTick() - tickstart ) > LCD_TIMEOUT_VALUE) + { + hlcd->ErrorCode = HAL_LCD_ERROR_ENS; + return HAL_TIMEOUT; + } + } + + /* Get timeout */ + tickstart = HAL_GetTick(); + + /*!< Wait Until the LCD Booster is ready */ + while(__HAL_LCD_GET_FLAG(hlcd, LCD_FLAG_RDY) == RESET) + { + if((HAL_GetTick() - tickstart ) > LCD_TIMEOUT_VALUE) + { + hlcd->ErrorCode = HAL_LCD_ERROR_RDY; + return HAL_TIMEOUT; + } + } + + /* Initialize the LCD state */ + hlcd->ErrorCode = HAL_LCD_ERROR_NONE; + hlcd->State= HAL_LCD_STATE_READY; + + return HAL_OK; +} + +/** + * @brief LCD MSP DeInit. + * @param hlcd: LCD handle + * @retval None + */ + __weak void HAL_LCD_MspDeInit(LCD_HandleTypeDef *hlcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hlcd); + + /* NOTE: This function Should not be modified, when the callback is needed, + the HAL_LCD_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief LCD MSP Init. + * @param hlcd: LCD handle + * @retval None + */ + __weak void HAL_LCD_MspInit(LCD_HandleTypeDef *hlcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hlcd); + + /* NOTE: This function Should not be modified, when the callback is needed, + the HAL_LCD_MspInit could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup LCD_Exported_Functions_Group2 IO operation methods + * @brief LCD RAM functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] Using its double buffer memory the LCD controller ensures the coherency of the + displayed information without having to use interrupts to control LCD_RAM + modification. + (+)The application software can access the first buffer level (LCD_RAM) through + the APB interface. Once it has modified the LCD_RAM using the HAL_LCD_Write() API, + it sets the UDR flag in the LCD_SR register using the HAL_LCD_UpdateDisplayRequest() API. + This UDR flag (update display request) requests the updated information to be + moved into the second buffer level (LCD_DISPLAY). + (+)This operation is done synchronously with the frame (at the beginning of the + next frame), until the update is completed, the LCD_RAM is write protected and + the UDR flag stays high. + (+)Once the update is completed another flag (UDD - Update Display Done) is set and + generates an interrupt if the UDDIE bit in the LCD_FCR register is set. + The time it takes to update LCD_DISPLAY is, in the worst case, one odd and one + even frame. + (+)The update will not occur (UDR = 1 and UDD = 0) until the display is + enabled (LCDEN = 1). + +@endverbatim + * @{ + */ + +/** + * @brief Writes a word in the specific LCD RAM. + * @param hlcd: LCD handle + * @param RAMRegisterIndex: specifies the LCD RAM Register. + * This parameter can be one of the following values: + * @arg LCD_RAM_REGISTER0: LCD RAM Register 0 + * @arg LCD_RAM_REGISTER1: LCD RAM Register 1 + * @arg LCD_RAM_REGISTER2: LCD RAM Register 2 + * @arg LCD_RAM_REGISTER3: LCD RAM Register 3 + * @arg LCD_RAM_REGISTER4: LCD RAM Register 4 + * @arg LCD_RAM_REGISTER5: LCD RAM Register 5 + * @arg LCD_RAM_REGISTER6: LCD RAM Register 6 + * @arg LCD_RAM_REGISTER7: LCD RAM Register 7 + * @arg LCD_RAM_REGISTER8: LCD RAM Register 8 + * @arg LCD_RAM_REGISTER9: LCD RAM Register 9 + * @arg LCD_RAM_REGISTER10: LCD RAM Register 10 + * @arg LCD_RAM_REGISTER11: LCD RAM Register 11 + * @arg LCD_RAM_REGISTER12: LCD RAM Register 12 + * @arg LCD_RAM_REGISTER13: LCD RAM Register 13 + * @arg LCD_RAM_REGISTER14: LCD RAM Register 14 + * @arg LCD_RAM_REGISTER15: LCD RAM Register 15 + * @param RAMRegisterMask: specifies the LCD RAM Register Data Mask. + * @param Data: specifies LCD Data Value to be written. + * @retval None + */ +HAL_StatusTypeDef HAL_LCD_Write(LCD_HandleTypeDef *hlcd, uint32_t RAMRegisterIndex, uint32_t RAMRegisterMask, uint32_t Data) +{ + uint32_t tickstart = 0x00; + + if((hlcd->State == HAL_LCD_STATE_READY) || (hlcd->State == HAL_LCD_STATE_BUSY)) + { + /* Check the parameters */ + assert_param(IS_LCD_RAM_REGISTER(RAMRegisterIndex)); + + if(hlcd->State == HAL_LCD_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hlcd); + hlcd->State = HAL_LCD_STATE_BUSY; + + /* Get timeout */ + tickstart = HAL_GetTick(); + + /*!< Wait Until the LCD is ready */ + while(__HAL_LCD_GET_FLAG(hlcd, LCD_FLAG_UDR) != RESET) + { + if((HAL_GetTick() - tickstart ) > LCD_TIMEOUT_VALUE) + { + hlcd->ErrorCode = HAL_LCD_ERROR_UDR; + + /* Process Unlocked */ + __HAL_UNLOCK(hlcd); + + return HAL_TIMEOUT; + } + } + } + + /* Copy the new Data bytes to LCD RAM register */ + MODIFY_REG(hlcd->Instance->RAM[RAMRegisterIndex], ~(RAMRegisterMask), Data); + + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Clears the LCD RAM registers. + * @param hlcd: LCD handle + * @retval None + */ +HAL_StatusTypeDef HAL_LCD_Clear(LCD_HandleTypeDef *hlcd) +{ + uint32_t tickstart = 0x00; + uint32_t counter = 0; + + if((hlcd->State == HAL_LCD_STATE_READY) || (hlcd->State == HAL_LCD_STATE_BUSY)) + { + /* Process Locked */ + __HAL_LOCK(hlcd); + + hlcd->State = HAL_LCD_STATE_BUSY; + + /* Get timeout */ + tickstart = HAL_GetTick(); + + /*!< Wait Until the LCD is ready */ + while(__HAL_LCD_GET_FLAG(hlcd, LCD_FLAG_UDR) != RESET) + { + if((HAL_GetTick() - tickstart ) > LCD_TIMEOUT_VALUE) + { + hlcd->ErrorCode = HAL_LCD_ERROR_UDR; + + /* Process Unlocked */ + __HAL_UNLOCK(hlcd); + + return HAL_TIMEOUT; + } + } + /* Clear the LCD_RAM registers */ + for(counter = LCD_RAM_REGISTER0; counter <= LCD_RAM_REGISTER15; counter++) + { + hlcd->Instance->RAM[counter] = 0; + } + + /* Update the LCD display */ + HAL_LCD_UpdateDisplayRequest(hlcd); + + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Enables the Update Display Request. + * @param hlcd: LCD handle + * @note Each time software modifies the LCD_RAM it must set the UDR bit to + * transfer the updated data to the second level buffer. + * The UDR bit stays set until the end of the update and during this + * time the LCD_RAM is write protected. + * @note When the display is disabled, the update is performed for all + * LCD_DISPLAY locations. + * When the display is enabled, the update is performed only for locations + * for which commons are active (depending on DUTY). For example if + * DUTY = 1/2, only the LCD_DISPLAY of COM0 and COM1 will be updated. + * @retval None + */ +HAL_StatusTypeDef HAL_LCD_UpdateDisplayRequest(LCD_HandleTypeDef *hlcd) +{ + uint32_t tickstart = 0x00; + + /* Clear the Update Display Done flag before starting the update display request */ + __HAL_LCD_CLEAR_FLAG(hlcd, LCD_FLAG_UDD); + + /* Enable the display request */ + hlcd->Instance->SR |= LCD_SR_UDR; + + /* Get timeout */ + tickstart = HAL_GetTick(); + + /*!< Wait Until the LCD display is done */ + while(__HAL_LCD_GET_FLAG(hlcd, LCD_FLAG_UDD) == RESET) + { + if((HAL_GetTick() - tickstart ) > LCD_TIMEOUT_VALUE) + { + hlcd->ErrorCode = HAL_LCD_ERROR_UDD; + + /* Process Unlocked */ + __HAL_UNLOCK(hlcd); + + return HAL_TIMEOUT; + } + } + + hlcd->State = HAL_LCD_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hlcd); + + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup LCD_Exported_Functions_Group3 Peripheral State methods + * @brief LCD State functions + * +@verbatim + =============================================================================== + ##### Peripheral State functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the LCD: + (+) HAL_LCD_GetState() API can be helpful to check in run-time the state of the LCD peripheral State. + (+) HAL_LCD_GetError() API to return the LCD error code. +@endverbatim + * @{ + */ + +/** + * @brief Returns the LCD state. + * @param hlcd: LCD handle + * @retval HAL state + */ +HAL_LCD_StateTypeDef HAL_LCD_GetState(LCD_HandleTypeDef *hlcd) +{ + return hlcd->State; +} + +/** + * @brief Return the LCD error code + * @param hlcd: LCD handle + * @retval LCD Error Code + */ +uint32_t HAL_LCD_GetError(LCD_HandleTypeDef *hlcd) +{ + return hlcd->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup LCD_Private_Functions LCD Private Functions + * @{ + */ + +/** + * @brief Waits until the LCD FCR register is synchronized in the LCDCLK domain. + * This function must be called after any write operation to LCD_FCR register. + * @retval None + */ +HAL_StatusTypeDef LCD_WaitForSynchro(LCD_HandleTypeDef *hlcd) +{ + uint32_t tickstart = 0x00; + + /* Get timeout */ + tickstart = HAL_GetTick(); + + /* Loop until FCRSF flag is set */ + while(__HAL_LCD_GET_FLAG(hlcd, LCD_FLAG_FCRSF) == RESET) + { + if((HAL_GetTick() - tickstart ) > LCD_TIMEOUT_VALUE) + { + hlcd->ErrorCode = HAL_LCD_ERROR_FCRSF; + return HAL_TIMEOUT; + } + } + + return HAL_OK; +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* STM32L100xB || STM32L100xBA || STM32L100xC ||... || STM32L162xD || STM32L162xE || STM32L162xDX */ + +#endif /* HAL_LCD_MODULE_ENABLED */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_msp_template.c b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_msp_template.c new file mode 100755 index 0000000..5c02054 --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_msp_template.c @@ -0,0 +1,111 @@ +/** + ****************************************************************************** + * @file stm32l1xx_hal_msp_template.c + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief HAL BSP module. + * This file template is located in the HAL folder and should be copied + * to the user folder. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_hal.h" + +/** @addtogroup STM32L1xx_HAL_Driver + * @{ + */ + +/** @defgroup HAL_MSP HAL_MSP + * @brief HAL MSP module. + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup HAL_MSP_Exported_Functions HAL MSP Exported Functions + * @{ + */ + +/** + * @brief Initializes the Global MSP. + * @retval None + */ +void HAL_MspInit(void) +{ + +} + +/** + * @brief DeInitializes the Global MSP. + * @retval None + */ +void HAL_MspDeInit(void) +{ + +} + +/** + * @brief Initializes the PPP MSP. + * @retval None + */ +void HAL_PPP_MspInit(void) +{ + +} + +/** + * @brief DeInitializes the PPP MSP. + * @retval None + */ +void HAL_PPP_MspDeInit(void) +{ + +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_nor.c b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_nor.c new file mode 100755 index 0000000..ab7fa72 --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_nor.c @@ -0,0 +1,1060 @@ +/** + ****************************************************************************** + * @file stm32l1xx_hal_nor.c + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief NOR HAL module driver. + * This file provides a generic firmware to drive NOR memories mounted + * as external device. + * + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + This driver is a generic layered driver which contains a set of APIs used to + control NOR flash memories. It uses the FSMC layer functions to interface + with NOR devices. This driver is used as follows: + + (+) NOR flash memory configuration sequence using the function HAL_NOR_Init() + with control and timing parameters for both normal and extended mode. + + (+) Read NOR flash memory manufacturer code and device IDs using the function + HAL_NOR_Read_ID(). The read information is stored in the NOR_ID_TypeDef + structure declared by the function caller. + + (+) Access NOR flash memory by read/write data unit operations using the functions + HAL_NOR_Read(), HAL_NOR_Program(). + + (+) Perform NOR flash erase block/chip operations using the functions + HAL_NOR_Erase_Block() and HAL_NOR_Erase_Chip(). + + (+) Read the NOR flash CFI (common flash interface) IDs using the function + HAL_NOR_Read_CFI(). The read information is stored in the NOR_CFI_TypeDef + structure declared by the function caller. + + (+) You can also control the NOR device by calling the control APIs HAL_NOR_WriteOperation_Enable()/ + HAL_NOR_WriteOperation_Disable() to respectively enable/disable the NOR write operation + + (+) You can monitor the NOR device HAL state by calling the function + HAL_NOR_GetState() + [..] + (@) This driver is a set of generic APIs which handle standard NOR flash operations. + If a NOR flash device contains different operations and/or implementations, + it should be implemented separately. + + *** NOR HAL driver macros list *** + ============================================= + [..] + Below the list of most used macros in NOR HAL driver. + + (+) NOR_WRITE : NOR memory write data to specified address + + @endverbatim + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_hal.h" + +/** @addtogroup STM32L1xx_HAL_Driver + * @{ + */ + +#ifdef HAL_NOR_MODULE_ENABLED +#if defined (STM32L151xD) || defined (STM32L152xD) || defined (STM32L162xD) + +/** @defgroup NOR NOR + * @brief NOR driver modules + * @{ + */ +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup NOR_Private_Constants NOR Private Constants + * @{ + */ + +/* Constants to define address to set to write a command */ +#define NOR_CMD_ADDRESS_FIRST (uint16_t)0x0555 +#define NOR_CMD_ADDRESS_FIRST_CFI (uint16_t)0x0055 +#define NOR_CMD_ADDRESS_SECOND (uint16_t)0x02AA +#define NOR_CMD_ADDRESS_THIRD (uint16_t)0x0555 +#define NOR_CMD_ADDRESS_FOURTH (uint16_t)0x0555 +#define NOR_CMD_ADDRESS_FIFTH (uint16_t)0x02AA +#define NOR_CMD_ADDRESS_SIXTH (uint16_t)0x0555 + +/* Constants to define data to program a command */ +#define NOR_CMD_DATA_READ_RESET (uint16_t)0x00F0 +#define NOR_CMD_DATA_FIRST (uint16_t)0x00AA +#define NOR_CMD_DATA_SECOND (uint16_t)0x0055 +#define NOR_CMD_DATA_AUTO_SELECT (uint16_t)0x0090 +#define NOR_CMD_DATA_PROGRAM (uint16_t)0x00A0 +#define NOR_CMD_DATA_CHIP_BLOCK_ERASE_THIRD (uint16_t)0x0080 +#define NOR_CMD_DATA_CHIP_BLOCK_ERASE_FOURTH (uint16_t)0x00AA +#define NOR_CMD_DATA_CHIP_BLOCK_ERASE_FIFTH (uint16_t)0x0055 +#define NOR_CMD_DATA_CHIP_ERASE (uint16_t)0x0010 +#define NOR_CMD_DATA_CFI (uint16_t)0x0098 + +#define NOR_CMD_DATA_BUFFER_AND_PROG (uint8_t)0x25 +#define NOR_CMD_DATA_BUFFER_AND_PROG_CONFIRM (uint8_t)0x29 +#define NOR_CMD_DATA_BLOCK_ERASE (uint8_t)0x30 + +/* Mask on NOR STATUS REGISTER */ +#define NOR_MASK_STATUS_DQ5 (uint16_t)0x0020 +#define NOR_MASK_STATUS_DQ6 (uint16_t)0x0040 + +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/** @defgroup NOR_Private_Macros NOR Private Macros + * @{ + */ + +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ + +/** @defgroup NOR_Private_Variables NOR Private Variables + * @{ + */ + +static uint32_t uwNORMemoryDataWidth = NOR_MEMORY_8B; + +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup NOR_Exported_Functions NOR Exported Functions + * @{ + */ + +/** @defgroup NOR_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * + @verbatim + ============================================================================== + ##### NOR Initialization and de_initialization functions ##### + ============================================================================== + [..] + This section provides functions allowing to initialize/de-initialize + the NOR memory + +@endverbatim + * @{ + */ + +/** + * @brief Perform the NOR memory Initialization sequence + * @param hnor: pointer to a NOR_HandleTypeDef structure that contains + * the configuration information for NOR module. + * @param Timing: pointer to NOR control timing structure + * @param ExtTiming: pointer to NOR extended mode timing structure + * @retval HAL status + */ +HAL_StatusTypeDef HAL_NOR_Init(NOR_HandleTypeDef *hnor, FSMC_NORSRAM_TimingTypeDef *Timing, FSMC_NORSRAM_TimingTypeDef *ExtTiming) +{ + /* Check the NOR handle parameter */ + if(hnor == NULL) + { + return HAL_ERROR; + } + + if(hnor->State == HAL_NOR_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hnor->Lock = HAL_UNLOCKED; + + /* Initialize the low level hardware (MSP) */ + HAL_NOR_MspInit(hnor); + } + + /* Initialize NOR control Interface */ + FSMC_NORSRAM_Init(hnor->Instance, &(hnor->Init)); + + /* Initialize NOR timing Interface */ + FSMC_NORSRAM_Timing_Init(hnor->Instance, Timing, hnor->Init.NSBank); + + /* Initialize NOR extended mode timing Interface */ + FSMC_NORSRAM_Extended_Timing_Init(hnor->Extended, ExtTiming, hnor->Init.NSBank, hnor->Init.ExtendedMode); + + /* Enable the NORSRAM device */ + __FSMC_NORSRAM_ENABLE(hnor->Instance, hnor->Init.NSBank); + + /* Initialize NOR Memory Data Width*/ + if (hnor->Init.MemoryDataWidth == FSMC_NORSRAM_MEM_BUS_WIDTH_8) + { + uwNORMemoryDataWidth = NOR_MEMORY_8B; + } + else + { + uwNORMemoryDataWidth = NOR_MEMORY_16B; + } + + /* Check the NOR controller state */ + hnor->State = HAL_NOR_STATE_READY; + + return HAL_OK; +} + +/** + * @brief Perform NOR memory De-Initialization sequence + * @param hnor: pointer to a NOR_HandleTypeDef structure that contains + * the configuration information for NOR module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_NOR_DeInit(NOR_HandleTypeDef *hnor) +{ + /* De-Initialize the low level hardware (MSP) */ + HAL_NOR_MspDeInit(hnor); + + /* Configure the NOR registers with their reset values */ + FSMC_NORSRAM_DeInit(hnor->Instance, hnor->Extended, hnor->Init.NSBank); + + /* Update the NOR controller state */ + hnor->State = HAL_NOR_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(hnor); + + return HAL_OK; +} + +/** + * @brief NOR MSP Init + * @param hnor: pointer to a NOR_HandleTypeDef structure that contains + * the configuration information for NOR module. + * @retval None + */ +__weak void HAL_NOR_MspInit(NOR_HandleTypeDef *hnor) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hnor); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_NOR_MspInit could be implemented in the user file + */ +} + +/** + * @brief NOR MSP DeInit + * @param hnor: pointer to a NOR_HandleTypeDef structure that contains + * the configuration information for NOR module. + * @retval None + */ +__weak void HAL_NOR_MspDeInit(NOR_HandleTypeDef *hnor) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hnor); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_NOR_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief NOR MSP Wait fro Ready/Busy signal + * @param hnor: pointer to a NOR_HandleTypeDef structure that contains + * the configuration information for NOR module. + * @param Timeout: Maximum timeout value + * @retval None + */ +__weak void HAL_NOR_MspWait(NOR_HandleTypeDef *hnor, uint32_t Timeout) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hnor); + UNUSED(Timeout); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_NOR_MspWait could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup NOR_Exported_Functions_Group2 Input and Output functions + * @brief Input Output and memory control functions + * + @verbatim + ============================================================================== + ##### NOR Input and Output functions ##### + ============================================================================== + [..] + This section provides functions allowing to use and control the NOR memory + +@endverbatim + * @{ + */ + +/** + * @brief Read NOR flash IDs + * @param hnor: pointer to a NOR_HandleTypeDef structure that contains + * the configuration information for NOR module. + * @param pNOR_ID : pointer to NOR ID structure + * @retval HAL status + */ +HAL_StatusTypeDef HAL_NOR_Read_ID(NOR_HandleTypeDef *hnor, NOR_IDTypeDef *pNOR_ID) +{ + uint32_t deviceaddress = 0; + + /* Process Locked */ + __HAL_LOCK(hnor); + + /* Check the NOR controller state */ + if(hnor->State == HAL_NOR_STATE_BUSY) + { + return HAL_BUSY; + } + + /* Select the NOR device address */ + if (hnor->Init.NSBank == FSMC_NORSRAM_BANK1) + { + deviceaddress = NOR_MEMORY_ADRESS1; + } + else if (hnor->Init.NSBank == FSMC_NORSRAM_BANK2) + { + deviceaddress = NOR_MEMORY_ADRESS2; + } + else if (hnor->Init.NSBank == FSMC_NORSRAM_BANK3) + { + deviceaddress = NOR_MEMORY_ADRESS3; + } + else /* FSMC_NORSRAM_BANK4 */ + { + deviceaddress = NOR_MEMORY_ADRESS4; + } + + /* Update the NOR controller state */ + hnor->State = HAL_NOR_STATE_BUSY; + + /* Send read ID command */ + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_THIRD), NOR_CMD_DATA_AUTO_SELECT); + + /* Read the NOR IDs */ + pNOR_ID->Manufacturer_Code = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, MC_ADDRESS); + pNOR_ID->Device_Code1 = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, DEVICE_CODE1_ADDR); + pNOR_ID->Device_Code2 = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, DEVICE_CODE2_ADDR); + pNOR_ID->Device_Code3 = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, DEVICE_CODE3_ADDR); + + /* Check the NOR controller state */ + hnor->State = HAL_NOR_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hnor); + + return HAL_OK; +} + +/** + * @brief Returns the NOR memory to Read mode. + * @param hnor: pointer to a NOR_HandleTypeDef structure that contains + * the configuration information for NOR module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_NOR_ReturnToReadMode(NOR_HandleTypeDef *hnor) +{ + uint32_t deviceaddress = 0; + + /* Process Locked */ + __HAL_LOCK(hnor); + + /* Check the NOR controller state */ + if(hnor->State == HAL_NOR_STATE_BUSY) + { + return HAL_BUSY; + } + + /* Select the NOR device address */ + if (hnor->Init.NSBank == FSMC_NORSRAM_BANK1) + { + deviceaddress = NOR_MEMORY_ADRESS1; + } + else if (hnor->Init.NSBank == FSMC_NORSRAM_BANK2) + { + deviceaddress = NOR_MEMORY_ADRESS2; + } + else if (hnor->Init.NSBank == FSMC_NORSRAM_BANK3) + { + deviceaddress = NOR_MEMORY_ADRESS3; + } + else /* FSMC_NORSRAM_BANK4 */ + { + deviceaddress = NOR_MEMORY_ADRESS4; + } + + NOR_WRITE(deviceaddress, NOR_CMD_DATA_READ_RESET); + + /* Check the NOR controller state */ + hnor->State = HAL_NOR_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hnor); + + return HAL_OK; +} + +/** + * @brief Read data from NOR memory + * @param hnor: pointer to a NOR_HandleTypeDef structure that contains + * the configuration information for NOR module. + * @param pAddress: pointer to Device address + * @param pData : pointer to read data + * @retval HAL status + */ +HAL_StatusTypeDef HAL_NOR_Read(NOR_HandleTypeDef *hnor, uint32_t *pAddress, uint16_t *pData) +{ + uint32_t deviceaddress = 0; + + /* Process Locked */ + __HAL_LOCK(hnor); + + /* Check the NOR controller state */ + if(hnor->State == HAL_NOR_STATE_BUSY) + { + return HAL_BUSY; + } + + /* Select the NOR device address */ + if (hnor->Init.NSBank == FSMC_NORSRAM_BANK1) + { + deviceaddress = NOR_MEMORY_ADRESS1; + } + else if (hnor->Init.NSBank == FSMC_NORSRAM_BANK2) + { + deviceaddress = NOR_MEMORY_ADRESS2; + } + else if (hnor->Init.NSBank == FSMC_NORSRAM_BANK3) + { + deviceaddress = NOR_MEMORY_ADRESS3; + } + else /* FSMC_NORSRAM_BANK4 */ + { + deviceaddress = NOR_MEMORY_ADRESS4; + } + + /* Update the NOR controller state */ + hnor->State = HAL_NOR_STATE_BUSY; + + /* Send read data command */ + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND); + NOR_WRITE((uint32_t)pAddress, NOR_CMD_DATA_READ_RESET); + + /* Read the data */ + *pData = *(__IO uint32_t *)(uint32_t)pAddress; + + /* Check the NOR controller state */ + hnor->State = HAL_NOR_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hnor); + + return HAL_OK; +} + +/** + * @brief Program data to NOR memory + * @param hnor: pointer to a NOR_HandleTypeDef structure that contains + * the configuration information for NOR module. + * @param pAddress: Device address + * @param pData : pointer to the data to write + * @retval HAL status + */ +HAL_StatusTypeDef HAL_NOR_Program(NOR_HandleTypeDef *hnor, uint32_t *pAddress, uint16_t *pData) +{ + uint32_t deviceaddress = 0; + + /* Process Locked */ + __HAL_LOCK(hnor); + + /* Check the NOR controller state */ + if(hnor->State == HAL_NOR_STATE_BUSY) + { + return HAL_BUSY; + } + + /* Select the NOR device address */ + if (hnor->Init.NSBank == FSMC_NORSRAM_BANK1) + { + deviceaddress = NOR_MEMORY_ADRESS1; + } + else if (hnor->Init.NSBank == FSMC_NORSRAM_BANK2) + { + deviceaddress = NOR_MEMORY_ADRESS2; + } + else if (hnor->Init.NSBank == FSMC_NORSRAM_BANK3) + { + deviceaddress = NOR_MEMORY_ADRESS3; + } + else /* FSMC_NORSRAM_BANK4 */ + { + deviceaddress = NOR_MEMORY_ADRESS4; + } + + /* Update the NOR controller state */ + hnor->State = HAL_NOR_STATE_BUSY; + + /* Send program data command */ + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_THIRD), NOR_CMD_DATA_PROGRAM); + + /* Write the data */ + NOR_WRITE(pAddress, *pData); + + /* Check the NOR controller state */ + hnor->State = HAL_NOR_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hnor); + + return HAL_OK; +} + +/** + * @brief Reads a block of data from the FSMC NOR memory. + * @param hnor: pointer to a NOR_HandleTypeDef structure that contains + * the configuration information for NOR module. + * @param uwAddress: NOR memory internal address to read from. + * @param pData: pointer to the buffer that receives the data read from the + * NOR memory. + * @param uwBufferSize : number of Half word to read. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_NOR_ReadBuffer(NOR_HandleTypeDef *hnor, uint32_t uwAddress, uint16_t *pData, uint32_t uwBufferSize) +{ + uint32_t deviceaddress = 0; + + /* Process Locked */ + __HAL_LOCK(hnor); + + /* Check the NOR controller state */ + if(hnor->State == HAL_NOR_STATE_BUSY) + { + return HAL_BUSY; + } + + /* Select the NOR device address */ + if (hnor->Init.NSBank == FSMC_NORSRAM_BANK1) + { + deviceaddress = NOR_MEMORY_ADRESS1; + } + else if (hnor->Init.NSBank == FSMC_NORSRAM_BANK2) + { + deviceaddress = NOR_MEMORY_ADRESS2; + } + else if (hnor->Init.NSBank == FSMC_NORSRAM_BANK3) + { + deviceaddress = NOR_MEMORY_ADRESS3; + } + else /* FSMC_NORSRAM_BANK4 */ + { + deviceaddress = NOR_MEMORY_ADRESS4; + } + + /* Update the NOR controller state */ + hnor->State = HAL_NOR_STATE_BUSY; + + /* Send read data command */ + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND); + NOR_WRITE(uwAddress, NOR_CMD_DATA_READ_RESET); + + /* Read buffer */ + while( uwBufferSize > 0) + { + *pData++ = *(__IO uint16_t *)uwAddress; + uwAddress += 2; + uwBufferSize--; + } + + /* Check the NOR controller state */ + hnor->State = HAL_NOR_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hnor); + + return HAL_OK; +} + +/** + * @brief Writes a half-word buffer to the FSMC NOR memory. This function + * must be used only with S29GL128P NOR memory. + * @param hnor: pointer to a NOR_HandleTypeDef structure that contains + * the configuration information for NOR module. + * @param uwAddress: NOR memory internal address from which the data + * @note Some NOR memory need Address aligned to xx bytes (can be aligned to + * 64 bytes boundary for example). + * @param pData: pointer to source data buffer. + * @param uwBufferSize: number of Half words to write. + * @note The maximum buffer size allowed is NOR memory dependent + * (can be 64 Bytes max for example). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_NOR_ProgramBuffer(NOR_HandleTypeDef *hnor, uint32_t uwAddress, uint16_t *pData, uint32_t uwBufferSize) +{ + uint16_t * p_currentaddress = (uint16_t *)NULL; + uint16_t * p_endaddress = (uint16_t *)NULL; + uint32_t lastloadedaddress = 0, deviceaddress = 0; + + /* Process Locked */ + __HAL_LOCK(hnor); + + /* Check the NOR controller state */ + if(hnor->State == HAL_NOR_STATE_BUSY) + { + return HAL_BUSY; + } + + /* Select the NOR device address */ + if (hnor->Init.NSBank == FSMC_NORSRAM_BANK1) + { + deviceaddress = NOR_MEMORY_ADRESS1; + } + else if (hnor->Init.NSBank == FSMC_NORSRAM_BANK2) + { + deviceaddress = NOR_MEMORY_ADRESS2; + } + else if (hnor->Init.NSBank == FSMC_NORSRAM_BANK3) + { + deviceaddress = NOR_MEMORY_ADRESS3; + } + else /* FSMC_NORSRAM_BANK4 */ + { + deviceaddress = NOR_MEMORY_ADRESS4; + } + + /* Update the NOR controller state */ + hnor->State = HAL_NOR_STATE_BUSY; + + /* Initialize variables */ + p_currentaddress = (uint16_t*)((uint32_t)(uwAddress)); + p_endaddress = p_currentaddress + (uwBufferSize-1); + lastloadedaddress = (uint32_t)(uwAddress); + + /* Issue unlock command sequence */ + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND); + + /* Write Buffer Load Command */ + NOR_WRITE((uint32_t)(p_currentaddress), NOR_CMD_DATA_BUFFER_AND_PROG); + NOR_WRITE((uint32_t)(p_currentaddress), (uwBufferSize-1)); + + /* Load Data into NOR Buffer */ + while(p_currentaddress <= p_endaddress) + { + /* Store last loaded address & data value (for polling) */ + lastloadedaddress = (uint32_t)p_currentaddress; + + NOR_WRITE(p_currentaddress, *pData++); + + p_currentaddress++; + } + + NOR_WRITE((uint32_t)(lastloadedaddress), NOR_CMD_DATA_BUFFER_AND_PROG_CONFIRM); + + /* Check the NOR controller state */ + hnor->State = HAL_NOR_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hnor); + + return HAL_OK; + +} + +/** + * @brief Erase the specified block of the NOR memory + * @param hnor: pointer to a NOR_HandleTypeDef structure that contains + * the configuration information for NOR module. + * @param BlockAddress : Block to erase address + * @param Address: Device address + * @retval HAL status + */ +HAL_StatusTypeDef HAL_NOR_Erase_Block(NOR_HandleTypeDef *hnor, uint32_t BlockAddress, uint32_t Address) +{ + uint32_t deviceaddress = 0; + + /* Process Locked */ + __HAL_LOCK(hnor); + + /* Check the NOR controller state */ + if(hnor->State == HAL_NOR_STATE_BUSY) + { + return HAL_BUSY; + } + + /* Select the NOR device address */ + if (hnor->Init.NSBank == FSMC_NORSRAM_BANK1) + { + deviceaddress = NOR_MEMORY_ADRESS1; + } + else if (hnor->Init.NSBank == FSMC_NORSRAM_BANK2) + { + deviceaddress = NOR_MEMORY_ADRESS2; + } + else if (hnor->Init.NSBank == FSMC_NORSRAM_BANK3) + { + deviceaddress = NOR_MEMORY_ADRESS3; + } + else /* FSMC_NORSRAM_BANK4 */ + { + deviceaddress = NOR_MEMORY_ADRESS4; + } + + /* Update the NOR controller state */ + hnor->State = HAL_NOR_STATE_BUSY; + + /* Send block erase command sequence */ + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_THIRD), NOR_CMD_DATA_CHIP_BLOCK_ERASE_THIRD); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FOURTH), NOR_CMD_DATA_CHIP_BLOCK_ERASE_FOURTH); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIFTH), NOR_CMD_DATA_CHIP_BLOCK_ERASE_FIFTH); + NOR_WRITE((uint32_t)(BlockAddress + Address), NOR_CMD_DATA_BLOCK_ERASE); + + /* Check the NOR memory status and update the controller state */ + hnor->State = HAL_NOR_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hnor); + + return HAL_OK; + +} + +/** + * @brief Erase the entire NOR chip. + * @param hnor: pointer to a NOR_HandleTypeDef structure that contains + * the configuration information for NOR module. + * @param Address : Device address + * @retval HAL status + */ +HAL_StatusTypeDef HAL_NOR_Erase_Chip(NOR_HandleTypeDef *hnor, uint32_t Address) +{ + uint32_t deviceaddress = 0; + + /* Process Locked */ + __HAL_LOCK(hnor); + + /* Check the NOR controller state */ + if(hnor->State == HAL_NOR_STATE_BUSY) + { + return HAL_BUSY; + } + + /* Select the NOR device address */ + if (hnor->Init.NSBank == FSMC_NORSRAM_BANK1) + { + deviceaddress = NOR_MEMORY_ADRESS1; + } + else if (hnor->Init.NSBank == FSMC_NORSRAM_BANK2) + { + deviceaddress = NOR_MEMORY_ADRESS2; + } + else if (hnor->Init.NSBank == FSMC_NORSRAM_BANK3) + { + deviceaddress = NOR_MEMORY_ADRESS3; + } + else /* FSMC_NORSRAM_BANK4 */ + { + deviceaddress = NOR_MEMORY_ADRESS4; + } + + /* Update the NOR controller state */ + hnor->State = HAL_NOR_STATE_BUSY; + + /* Send NOR chip erase command sequence */ + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_THIRD), NOR_CMD_DATA_CHIP_BLOCK_ERASE_THIRD); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FOURTH), NOR_CMD_DATA_CHIP_BLOCK_ERASE_FOURTH); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIFTH), NOR_CMD_DATA_CHIP_BLOCK_ERASE_FIFTH); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SIXTH), NOR_CMD_DATA_CHIP_ERASE); + + /* Check the NOR memory status and update the controller state */ + hnor->State = HAL_NOR_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hnor); + + return HAL_OK; +} + +/** + * @brief Read NOR flash CFI IDs + * @param hnor: pointer to a NOR_HandleTypeDef structure that contains + * the configuration information for NOR module. + * @param pNOR_CFI : pointer to NOR CFI IDs structure + * @retval HAL status + */ +HAL_StatusTypeDef HAL_NOR_Read_CFI(NOR_HandleTypeDef *hnor, NOR_CFITypeDef *pNOR_CFI) +{ + uint32_t deviceaddress = 0; + + /* Process Locked */ + __HAL_LOCK(hnor); + + /* Check the NOR controller state */ + if(hnor->State == HAL_NOR_STATE_BUSY) + { + return HAL_BUSY; + } + + /* Select the NOR device address */ + if (hnor->Init.NSBank == FSMC_NORSRAM_BANK1) + { + deviceaddress = NOR_MEMORY_ADRESS1; + } + else if (hnor->Init.NSBank == FSMC_NORSRAM_BANK2) + { + deviceaddress = NOR_MEMORY_ADRESS2; + } + else if (hnor->Init.NSBank == FSMC_NORSRAM_BANK3) + { + deviceaddress = NOR_MEMORY_ADRESS3; + } + else /* FSMC_NORSRAM_BANK4 */ + { + deviceaddress = NOR_MEMORY_ADRESS4; + } + + /* Update the NOR controller state */ + hnor->State = HAL_NOR_STATE_BUSY; + + /* Send read CFI query command */ + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST_CFI), NOR_CMD_DATA_CFI); + + /* read the NOR CFI information */ + pNOR_CFI->CFI_1 = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, CFI1_ADDRESS); + pNOR_CFI->CFI_2 = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, CFI2_ADDRESS); + pNOR_CFI->CFI_3 = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, CFI3_ADDRESS); + pNOR_CFI->CFI_4 = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, CFI4_ADDRESS); + + /* Check the NOR controller state */ + hnor->State = HAL_NOR_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hnor); + + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup NOR_Exported_Functions_Group3 Control functions + * @brief management functions + * +@verbatim + ============================================================================== + ##### NOR Control functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to control dynamically + the NOR interface. + +@endverbatim + * @{ + */ + +/** + * @brief Enables dynamically NOR write operation. + * @param hnor: pointer to a NOR_HandleTypeDef structure that contains + * the configuration information for NOR module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_NOR_WriteOperation_Enable(NOR_HandleTypeDef *hnor) +{ + /* Process Locked */ + __HAL_LOCK(hnor); + + /* Enable write operation */ + FSMC_NORSRAM_WriteOperation_Enable(hnor->Instance, hnor->Init.NSBank); + + /* Update the NOR controller state */ + hnor->State = HAL_NOR_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hnor); + + return HAL_OK; +} + +/** + * @brief Disables dynamically NOR write operation. + * @param hnor: pointer to a NOR_HandleTypeDef structure that contains + * the configuration information for NOR module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_NOR_WriteOperation_Disable(NOR_HandleTypeDef *hnor) +{ + /* Process Locked */ + __HAL_LOCK(hnor); + + /* Update the SRAM controller state */ + hnor->State = HAL_NOR_STATE_BUSY; + + /* Disable write operation */ + FSMC_NORSRAM_WriteOperation_Disable(hnor->Instance, hnor->Init.NSBank); + + /* Update the NOR controller state */ + hnor->State = HAL_NOR_STATE_PROTECTED; + + /* Process unlocked */ + __HAL_UNLOCK(hnor); + + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup NOR_Exported_Functions_Group4 State functions + * @brief Peripheral State functions + * +@verbatim + ============================================================================== + ##### NOR State functions ##### + ============================================================================== + [..] + This subsection permits to get in run-time the status of the NOR controller + and the data flow. + +@endverbatim + * @{ + */ + +/** + * @brief return the NOR controller state + * @param hnor: pointer to a NOR_HandleTypeDef structure that contains + * the configuration information for NOR module. + * @retval NOR controller state + */ +HAL_NOR_StateTypeDef HAL_NOR_GetState(NOR_HandleTypeDef *hnor) +{ + return hnor->State; +} + +/** + * @brief Returns the NOR operation status. + * @param hnor: pointer to a NOR_HandleTypeDef structure that contains + * the configuration information for NOR module. + * @param Address: Device address + * @param Timeout: NOR progamming Timeout + * @retval NOR_Status: The returned value can be: HAL_NOR_STATUS_SUCCESS, HAL_NOR_STATUS_ERROR + * or HAL_NOR_STATUS_TIMEOUT + */ +HAL_NOR_StatusTypeDef HAL_NOR_GetStatus(NOR_HandleTypeDef *hnor, uint32_t Address, uint32_t Timeout) +{ + HAL_NOR_StatusTypeDef status = HAL_NOR_STATUS_ONGOING; + uint16_t tmp_sr1 = 0, tmp_sr2 = 0; + uint32_t tickstart = 0; + + /* Poll on NOR memory Ready/Busy signal ------------------------------------*/ + HAL_NOR_MspWait(hnor, Timeout); + + /* Get tick */ + tickstart = HAL_GetTick(); + while((status != HAL_NOR_STATUS_SUCCESS) && (status != HAL_NOR_STATUS_TIMEOUT)) + { + /* Check for the Timeout */ + if(Timeout != HAL_MAX_DELAY) + { + if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout)) + { + status = HAL_NOR_STATUS_TIMEOUT; + } + } + + /* Read NOR status register (DQ6 and DQ5) */ + tmp_sr1 = *(__IO uint16_t *)Address; + tmp_sr2 = *(__IO uint16_t *)Address; + + /* If DQ6 did not toggle between the two reads then return NOR_Success */ + if((tmp_sr1 & NOR_MASK_STATUS_DQ6) == (tmp_sr2 & NOR_MASK_STATUS_DQ6)) + { + return HAL_NOR_STATUS_SUCCESS; + } + + if((tmp_sr1 & NOR_MASK_STATUS_DQ5) != NOR_MASK_STATUS_DQ5) + { + status = HAL_NOR_STATUS_ONGOING; + } + + tmp_sr1 = *(__IO uint16_t *)Address; + tmp_sr2 = *(__IO uint16_t *)Address; + + /* If DQ6 did not toggle between the two reads then return NOR_Success */ + if((tmp_sr1 & NOR_MASK_STATUS_DQ6) == (tmp_sr2 & NOR_MASK_STATUS_DQ6)) + { + return HAL_NOR_STATUS_SUCCESS; + } + else if((tmp_sr1 & NOR_MASK_STATUS_DQ5) == NOR_MASK_STATUS_DQ5) + { + return HAL_NOR_STATUS_ERROR; + } + } + + /* Return the operation status */ + return status; +} + +/** + * @} + */ + +/** + * @} + */ +/** + * @} + */ +#endif /* STM32L151xD || STM32L152xD || STM32L162xD */ +#endif /* HAL_NOR_MODULE_ENABLED */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_opamp.c b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_opamp.c new file mode 100755 index 0000000..0a6f3a9 --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_opamp.c @@ -0,0 +1,1089 @@ +/** + ****************************************************************************** + * @file stm32l1xx_hal_opamp.c + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief OPAMP HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the operational amplifier(s)(OPAMP1, OPAMP2 etc) + * peripheral: + * + OPAMP configuration + * + OPAMP calibration + * Thanks to + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral Control functions + * + Peripheral State functions + * + @verbatim +================================================================================ + ##### OPAMP Peripheral Features ##### +================================================================================ + [..] The device integrates up to 3 operational amplifiers OPAMP1, OPAMP2, + OPAMP3 (OPAMP3 availability depends on device category) + + (#) The OPAMP(s) provides several exclusive running modes. + (++) Standalone mode + (++) Follower mode + + (#) All OPAMP (same for all OPAMPs) can operate in + (++) Either Low range (VDDA < 2.4V) power supply + (++) Or High range (VDDA > 2.4V) power supply + + (#) Each OPAMP(s) can be configured in normal and low power mode. + + (#) The OPAMP(s) provide(s) calibration capabilities. + (++) Calibration aims at correcting some offset for running mode. + (++) The OPAMP uses either factory calibration settings OR user defined + calibration (trimming) settings (i.e. trimming mode). + (++) The user defined settings can be figured out using self calibration + handled by HAL_OPAMP_SelfCalibrate, HAL_OPAMPEx_SelfCalibrateAll + (++) HAL_OPAMP_SelfCalibrate: + (+++) Runs automatically the calibration in 2 steps: for transistors + differential pair high (PMOS) or low (NMOS) + (+++) Enables the user trimming mode + (+++) Updates the init structure with trimming values with fresh calibration + results. + The user may store the calibration results for larger + (ex monitoring the trimming as a function of temperature + for instance) + (+++) For devices having several OPAMPs, HAL_OPAMPEx_SelfCalibrateAll + runs calibration of all OPAMPs in parallel to save search time. + + (#) Running mode: Standalone mode + (++) Gain is set externally (gain depends on external loads). + (++) Follower mode also possible externally by connecting the inverting input to + the output. + + (#) Running mode: Follower mode + (++) No Inverting Input is connected. + (++) The OPAMP(s) output(s) are internally connected to inverting input. + + ##### How to use this driver ##### +================================================================================ + [..] + + *** power supply range *** + ============================================ + [..] + To run in low power mode: + + (#) Configure the opamp using HAL_OPAMP_Init() function: + (++) Select OPAMP_POWERSUPPLY_LOW (VDDA lower than 2.4V) + (++) Otherwise select OPAMP_POWERSUPPLY_HIGH (VDDA higher than 2.4V) + + *** low / normal power mode *** + ============================================ + [..] + To run in low power mode: + + (#) Configure the opamp using HAL_OPAMP_Init() function: + (++) Select OPAMP_POWERMODE_LOWPOWER + (++) Otherwise select OPAMP_POWERMODE_NORMAL + + *** Calibration *** + ============================================ + [..] + To run the opamp calibration self calibration: + + (#) Start calibration using HAL_OPAMP_SelfCalibrate. + Store the calibration results. + + *** Running mode *** + ============================================ + [..] + + To use the opamp, perform the following steps: + + (#) Fill in the HAL_OPAMP_MspInit() to + (++) Enable the OPAMP Peripheral clock using macro "__HAL_RCC_OPAMP_CLK_ENABLE()" + (++) Configure the opamp input AND output in analog mode using + HAL_GPIO_Init() to map the opamp output to the GPIO pin. + + (#) Configure the opamp using HAL_OPAMP_Init() function: + (++) Select the mode + (++) Select the inverting input + (++) Select the non-inverting input + (++) Select either factory or user defined trimming mode. + (++) If the user defined trimming mode is enabled, select PMOS & NMOS trimming values + (typ. settings returned by HAL_OPAMP_SelfCalibrate function). + + (#) Enable the opamp using HAL_OPAMP_Start() function. + + (#) Disable the opamp using HAL_OPAMP_Stop() function. + + (#) Lock the opamp in running mode using HAL_OPAMP_Lock() function. + Caution: On STM32L1, HAL OPAMP lock is software lock only (not + hardware lock as on some other STM32 devices) + + (#) If needed, unlock the opamp using HAL_OPAMPEx_Unlock() function. + + *** Running mode: change of configuration while OPAMP ON *** + ============================================ + [..] + To Re-configure OPAMP when OPAMP is ON (change on the fly) + (#) If needed, Fill in the HAL_OPAMP_MspInit() + (++) This is the case for instance if you wish to use new OPAMP I/O + + (#) Configure the opamp using HAL_OPAMP_Init() function: + (++) As in configure case, selects first the parameters you wish to modify. + + (#) Change from low power mode to normal power mode (& vice versa) requires + first HAL_OPAMP_DeInit() (force OPAMP OFF) and then HAL_OPAMP_Init(). + In other words, of OPAMP is ON, HAL_OPAMP_Init can NOT change power mode + alone. + + @endverbatim + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* + Additionnal remark: + The OPAMPs inverting input can be selected among the list shown by table below. + The OPAMPs non inverting input can be selected among the list shown by table below. + + Table 1. OPAMPs inverting/non-inverting inputs for STM32L1 devices: + +--------------------------------------------------------------------------+ + | | HAL param | OPAMP1 | OPAMP2 | OPAMP3(4) | + | | name | | | | + |----------------|------------|--------------|--------------|--------------| + | Inverting | VM0 | PA2 | PA7 | PC2 | + | input (1) | VM1 | VINM pin (2) | VINM pin (2) | VINM pin (2) | + |----------------|------------|--------------|--------------|--------------| + | Non Inverting | VP0 | PA1 | PA6 | PC1 | + | input | DAC_CH1 (3)| DAC_CH1 | DAC_CH1 | --- | + | | DAC_CH2 (3)| --- | DAC_CH2 | DAC_CH2 | + +--------------------------------------------------------------------------+ + (1): NA in follower mode. + (2): OPAMP input OPAMPx_VINM are dedicated OPAMP pins, their availability + depends on device package. + (3): DAC channels 1 and 2 are connected internally to OPAMP. Nevertheless, + I/O pins connected to DAC can still be used as DAC output (pins PA4 + and PA5). + (4): OPAMP3 availability depends on device category. + + Table 2. OPAMPs outputs for STM32L1 devices: + +--------------------------------------------------------+ + | | OPAMP1 | OPAMP2 | OPAMP3(4) | + |-----------------|------------|------------|------------| + | Output | PA3 | PB0 | PC3 | + +--------------------------------------------------------+ + (4) : OPAMP3 availability depends on device category +*/ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_hal.h" + +/** @addtogroup STM32L1xx_HAL_Driver + * @{ + */ + +/** @defgroup OPAMP OPAMP + * @brief OPAMP module driver + * @{ + */ + +#ifdef HAL_OPAMP_MODULE_ENABLED + +#if defined (STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined (STM32L151xE) || defined (STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) || defined (STM32L162xC) || defined (STM32L152xC) || defined (STM32L151xC) + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup OPAMP_Exported_Functions OPAMP Exported Functions + * @{ + */ + +/** @defgroup OPAMP_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + ============================================================================== + ##### Initialization and de-initialization functions ##### + ============================================================================== + [..] This section provides functions allowing to: + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the OPAMP according to the specified + * parameters in the OPAMP_InitTypeDef and create the associated handle. + * @note If the selected opamp is locked, initialization can't be performed. + * To unlock the configuration, perform a system reset. + * @param hopamp: OPAMP handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_OPAMP_Init(OPAMP_HandleTypeDef* hopamp) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmp_csr = 0; /* Temporary variable to update register CSR, except bits ANAWSSELx, S7SEL2, OPA_RANGE, OPAxCALOUT */ + + /* Check the OPAMP handle allocation and lock status */ + /* Init not allowed if calibration is ongoing */ + if((hopamp == NULL) || (hopamp->State == HAL_OPAMP_STATE_BUSYLOCKED) + || (hopamp->State == HAL_OPAMP_STATE_CALIBBUSY) ) + { + status = HAL_ERROR; + } + else + { + /* Check the parameter */ + assert_param(IS_OPAMP_ALL_INSTANCE(hopamp->Instance)); + + /* Set OPAMP parameters */ + assert_param(IS_OPAMP_POWER_SUPPLY_RANGE(hopamp->Init.PowerSupplyRange)); + assert_param(IS_OPAMP_POWERMODE(hopamp->Init.PowerMode)); + assert_param(IS_OPAMP_FUNCTIONAL_NORMALMODE(hopamp->Init.Mode)); + assert_param(IS_OPAMP_NONINVERTING_INPUT_CHECK_INSTANCE(hopamp, hopamp->Init.NonInvertingInput)); + assert_param(IS_OPAMP_TRIMMING(hopamp->Init.UserTrimming)); + + if (hopamp->Init.Mode != OPAMP_FOLLOWER_MODE) + { + assert_param(IS_OPAMP_INVERTING_INPUT(hopamp->Init.InvertingInput)); + } + + if (hopamp->Init.UserTrimming == OPAMP_TRIMMING_USER) + { + if (hopamp->Init.PowerMode == OPAMP_POWERMODE_NORMAL) + { + assert_param(IS_OPAMP_TRIMMINGVALUE(hopamp->Init.TrimmingValueP)); + assert_param(IS_OPAMP_TRIMMINGVALUE(hopamp->Init.TrimmingValueN)); + } + else + { + assert_param(IS_OPAMP_TRIMMINGVALUE(hopamp->Init.TrimmingValuePLowPower)); + assert_param(IS_OPAMP_TRIMMINGVALUE(hopamp->Init.TrimmingValueNLowPower)); + } + } + + if(hopamp->State == HAL_OPAMP_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hopamp->Lock = HAL_UNLOCKED; + } + + /* Call MSP init function */ + HAL_OPAMP_MspInit(hopamp); + + /* Set OPAMP parameters */ + /* - Set internal switches in function of: */ + /* - OPAMP selected mode: standalone or follower. */ + /* - Non-inverting input connection */ + /* - Inverting input connection */ + /* - Set power supply range */ + /* - Set power mode and associated calibration parameters */ + + /* Get OPAMP CSR register into temporary variable */ + /* Note: OPAMP register CSR is written directly, independently of OPAMP */ + /* instance, because all OPAMP settings are dispatched in the same */ + /* register. */ + /* Settings of bits for each OPAMP instances are managed case by */ + /* case using macro (OPAMP_CSR_S3SELX(), OPAMP_CSR_ANAWSELX(), ...) */ + tmp_csr = OPAMP->CSR; + + /* Open all switches on non-inverting input, inverting input and output */ + /* feedback. */ + CLEAR_BIT(tmp_csr, OPAMP_CSR_ALL_SWITCHES(hopamp)); + + /* Set internal switches in function of OPAMP mode selected: standalone */ + /* or follower. */ + /* If follower mode is selected, feedback switch S3 is closed and */ + /* inverting inputs switches are let opened. */ + /* If standalone mode is selected, feedback switch S3 is let opened and */ + /* the selected inverting inputs switch is closed. */ + if (hopamp->Init.Mode == OPAMP_FOLLOWER_MODE) + { + /* Follower mode: Close switches S3 and SanB */ + SET_BIT(tmp_csr, OPAMP_CSR_S3SELX(hopamp)); + } + else + { + /* Set internal switches in function of inverting input selected: */ + /* Close switch to connect OPAMP inverting input to the selected */ + /* input: dedicated IO pin or alternative IO pin available on some */ + /* device packages. */ + if (hopamp->Init.InvertingInput == OPAMP_INVERTINGINPUT_IO0) + { + /* Close switch to connect OPAMP non-inverting input to */ + /* dedicated IO pin low-leakage. */ + SET_BIT(tmp_csr, OPAMP_CSR_S4SELX(hopamp)); + } + else + { + /* Close switch to connect OPAMP inverting input to alternative */ + /* IO pin available on some device packages. */ + SET_BIT(tmp_csr, OPAMP_CSR_ANAWSELX(hopamp)); + } + } + + /* Set internal switches in function of non-inverting input selected: */ + /* Close switch to connect OPAMP non-inverting input to the selected */ + /* input: dedicated IO pin or DAC channel. */ + if (hopamp->Init.NonInvertingInput == OPAMP_NONINVERTINGINPUT_IO0) + { + /* Close switch to connect OPAMP non-inverting input to */ + /* dedicated IO pin low-leakage. */ + SET_BIT(tmp_csr, OPAMP_CSR_S5SELX(hopamp)); + } + else if (hopamp->Init.NonInvertingInput == OPAMP_NONINVERTINGINPUT_DAC_CH1) + { + + /* Particular case for connection to DAC channel 1: */ + /* OPAMP_NONINVERTINGINPUT_DAC_CH1 available on OPAMP1 and OPAMP2 only */ + /* (OPAMP3 availability depends on device category). */ + if ((hopamp->Instance == OPAMP1) || (hopamp->Instance == OPAMP2)) + { + /* Close switch to connect OPAMP non-inverting input to */ + /* DAC channel 1. */ + SET_BIT(tmp_csr, OPAMP_CSR_S6SELX(hopamp)); + } + else + { + /* Set HAL status to error if another OPAMP instance as OPAMP1 or */ + /* OPAMP2 is intended to be connected to DAC channel 2. */ + status = HAL_ERROR; + } + } + else /* if (hopamp->Init.NonInvertingInput == */ + /* OPAMP_NONINVERTINGINPUT_DAC_CH2 ) */ + { + /* Particular case for connection to DAC channel 2: */ + /* OPAMP_NONINVERTINGINPUT_DAC_CH2 available on OPAMP2 and OPAMP3 only */ + /* (OPAMP3 availability depends on device category). */ + if (hopamp->Instance == OPAMP2) + { + /* Close switch to connect OPAMP non-inverting input to */ + /* DAC channel 2. */ + SET_BIT(tmp_csr, OPAMP_CSR_S7SEL2); + } + /* If OPAMP3 is selected (if available) */ + else if (hopamp->Instance != OPAMP1) + { + /* Close switch to connect OPAMP non-inverting input to */ + /* DAC channel 2. */ + SET_BIT(tmp_csr, OPAMP_CSR_S6SELX(hopamp)); + } + else + { + /* Set HAL status to error if another OPAMP instance as OPAMP2 or */ + /* OPAMP3 (if available) is intended to be connected to DAC channel 2.*/ + status = HAL_ERROR; + } + } + + /* Continue OPAMP configuration if settings of switches are correct */ + if (status != HAL_ERROR) + { + /* Set power mode and associated calibration parameters */ + if (hopamp->Init.PowerMode != OPAMP_POWERMODE_LOWPOWER) + { + /* Set normal mode */ + CLEAR_BIT(tmp_csr, OPAMP_CSR_OPAXLPM(hopamp)); + + if (hopamp->Init.UserTrimming == OPAMP_TRIMMING_USER) + { + /* Set calibration mode (factory or user) and values for */ + /* transistors differential pair high (PMOS) and low (NMOS) for */ + /* normal mode. */ + MODIFY_REG(OPAMP->OTR, OPAMP_OTR_OT_USER | + OPAMP_OFFSET_TRIM_SET(hopamp, OPAMP_FACTORYTRIMMING_N, OPAMP_TRIM_VALUE_MASK) | + OPAMP_OFFSET_TRIM_SET(hopamp, OPAMP_FACTORYTRIMMING_P, OPAMP_TRIM_VALUE_MASK) , + hopamp->Init.UserTrimming | + OPAMP_OFFSET_TRIM_SET(hopamp, OPAMP_FACTORYTRIMMING_N, hopamp->Init.TrimmingValueN) | + OPAMP_OFFSET_TRIM_SET(hopamp, OPAMP_FACTORYTRIMMING_P, hopamp->Init.TrimmingValueP) ); + } + else + { + /* Set calibration mode to factory */ + CLEAR_BIT(OPAMP->OTR, OPAMP_OTR_OT_USER); + } + + } + else + { + /* Set low power mode */ + SET_BIT(tmp_csr, OPAMP_CSR_OPAXLPM(hopamp)); + + if (hopamp->Init.UserTrimming == OPAMP_TRIMMING_USER) + { + /* Set calibration mode to user trimming */ + SET_BIT(OPAMP->OTR, OPAMP_OTR_OT_USER); + + /* Set values for transistors differential pair high (PMOS) and low */ + /* (NMOS) for low power mode. */ + MODIFY_REG(OPAMP->LPOTR, OPAMP_OFFSET_TRIM_SET(hopamp, OPAMP_FACTORYTRIMMING_N, OPAMP_TRIM_VALUE_MASK) | + OPAMP_OFFSET_TRIM_SET(hopamp, OPAMP_FACTORYTRIMMING_P, OPAMP_TRIM_VALUE_MASK) , + OPAMP_OFFSET_TRIM_SET(hopamp, OPAMP_FACTORYTRIMMING_N, hopamp->Init.TrimmingValueNLowPower) | + OPAMP_OFFSET_TRIM_SET(hopamp, OPAMP_FACTORYTRIMMING_P, hopamp->Init.TrimmingValuePLowPower) ); + } + else + { + /* Set calibration mode to factory trimming */ + CLEAR_BIT(OPAMP->OTR, OPAMP_OTR_OT_USER); + } + + } + + + /* Configure the power supply range */ + MODIFY_REG(tmp_csr, OPAMP_CSR_AOP_RANGE, + hopamp->Init.PowerSupplyRange); + + /* Set OPAMP CSR register from temporary variable */ + /* This allows to apply all changes on one time, in case of update on */ + /* the fly with OPAMP previously set and running: */ + /* - to avoid hazardous transient switches settings (risk of short */ + /* circuit) */ + /* - to avoid interruption of input signal */ + OPAMP->CSR = tmp_csr; + + + /* Update the OPAMP state */ + /* If coming from state reset: Update from state RESET to state READY */ + if (hopamp->State == HAL_OPAMP_STATE_RESET) + { + hopamp->State = HAL_OPAMP_STATE_READY; + } + /* else: OPAMP state remains READY or BUSY state (no update) */ + } + } + + return status; +} + +/** + * @brief DeInitializes the OPAMP peripheral + * @note Deinitialization can be performed if the OPAMP configuration is locked. + * (the OPAMP lock is SW in STM32L1) + * @param hopamp: OPAMP handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_OPAMP_DeInit(OPAMP_HandleTypeDef* hopamp) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the OPAMP handle allocation */ + /* DeInit not allowed if calibration is ongoing */ + if((hopamp == NULL) || (hopamp->State == HAL_OPAMP_STATE_CALIBBUSY)) + { + status = HAL_ERROR; + } + else + { + /* Check the parameter */ + assert_param(IS_OPAMP_ALL_INSTANCE(hopamp->Instance)); + + /* Disable the selected opamp */ + SET_BIT (OPAMP->CSR, OPAMP_CSR_OPAXPD(hopamp)); + + /* Open all switches on non-inverting input, inverting input and output */ + /* feedback. */ + /* Note: OPAMP register CSR is written directly, independently of OPAMP */ + /* instance, because all OPAMP settings are dispatched in the same */ + /* register. */ + /* Settings of bits for each OPAMP instances are managed case by */ + /* case using macro (OPAMP_CSR_S3SELX(), OPAMP_CSR_ANAWSELX(), ...) */ + CLEAR_BIT(OPAMP->CSR, OPAMP_CSR_ALL_SWITCHES(hopamp)); + + /* Note: Registers and bits shared with other OPAMP instances are kept */ + /* unchanged, to not impact other OPAMP while operating on the */ + /* selected OPAMP. */ + /* Unchanged: bit OPAMP_OTR_OT_USER (parameter "UserTrimming") */ + /* bit OPAMP_CSR_AOP_RANGE (parameter "PowerSupplyRange")*/ + + /* DeInit the low level hardware: GPIO, CLOCK and NVIC */ + HAL_OPAMP_MspDeInit(hopamp); + + /* Update the OPAMP state*/ + hopamp->State = HAL_OPAMP_STATE_RESET; + } + + /* Process unlocked */ + __HAL_UNLOCK(hopamp); + + return status; +} + + +/** + * @brief Initializes the OPAMP MSP. + * @param hopamp: OPAMP handle + * @retval None + */ +__weak void HAL_OPAMP_MspInit(OPAMP_HandleTypeDef* hopamp) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hopamp); + + /* NOTE : This function Should not be modified, when the callback is needed, + the function "HAL_OPAMP_MspInit()" must be implemented in the user file. + */ +} + +/** + * @brief DeInitializes OPAMP MSP. + * @param hopamp: OPAMP handle + * @retval None + */ +__weak void HAL_OPAMP_MspDeInit(OPAMP_HandleTypeDef* hopamp) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hopamp); + + /* NOTE : This function Should not be modified, when the callback is needed, + the function "HAL_OPAMP_MspDeInit()" must be implemented in the user file. + */ +} + +/** + * @} + */ + + +/** @defgroup OPAMP_Exported_Functions_Group2 IO operation functions + * @brief IO operation functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to manage the OPAMP + start, stop and calibration actions. + +@endverbatim + * @{ + */ + +/** + * @brief Start the opamp + * @param hopamp: OPAMP handle + * @retval HAL status + */ + +HAL_StatusTypeDef HAL_OPAMP_Start(OPAMP_HandleTypeDef* hopamp) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the OPAMP handle allocation */ + /* Check if OPAMP locked */ + if((hopamp == NULL) || (hopamp->State == HAL_OPAMP_STATE_BUSYLOCKED)) + { + status = HAL_ERROR; + } + else + { + /* Check the parameter */ + assert_param(IS_OPAMP_ALL_INSTANCE(hopamp->Instance)); + + if(hopamp->State == HAL_OPAMP_STATE_READY) + { + /* Enable the selected opamp */ + CLEAR_BIT (OPAMP->CSR, OPAMP_CSR_OPAXPD(hopamp)); + + /* Update the OPAMP state */ + /* From HAL_OPAMP_STATE_READY to HAL_OPAMP_STATE_BUSY */ + hopamp->State = HAL_OPAMP_STATE_BUSY; + } + else + { + status = HAL_ERROR; + } + + } + return status; +} + +/** + * @brief Stop the opamp + * @param hopamp: OPAMP handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_OPAMP_Stop(OPAMP_HandleTypeDef* hopamp) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the OPAMP handle allocation */ + /* Check if OPAMP locked */ + /* Check if OPAMP calibration ongoing */ + if((hopamp == NULL) || (hopamp->State == HAL_OPAMP_STATE_BUSYLOCKED) \ + || (hopamp->State == HAL_OPAMP_STATE_CALIBBUSY)) + { + status = HAL_ERROR; + } + else + { + /* Check the parameter */ + assert_param(IS_OPAMP_ALL_INSTANCE(hopamp->Instance)); + + if(hopamp->State == HAL_OPAMP_STATE_BUSY) + { + /* Disable the selected opamp */ + SET_BIT (OPAMP->CSR, OPAMP_CSR_OPAXPD(hopamp)); + + /* Update the OPAMP state*/ + /* From HAL_OPAMP_STATE_BUSY to HAL_OPAMP_STATE_READY*/ + hopamp->State = HAL_OPAMP_STATE_READY; + } + else + { + status = HAL_ERROR; + } + } + return status; +} + +/** + * @brief Run the self calibration of one OPAMP + * @note Trimming values (PMOS & NMOS) are updated and user trimming is + * enabled if calibration is succesful. + * @note Calibration is performed in the mode specified in OPAMP init + * structure (mode normal or low-power). To perform calibration for + * both modes, repeat this function twice after OPAMP init structure + * accordingly updated. + * @note Calibration runs about 10 ms. + * @param hopamp handle + * @retval Updated offset trimming values (PMOS & NMOS), user trimming is enabled + * @retval HAL status + */ +HAL_StatusTypeDef HAL_OPAMP_SelfCalibrate(OPAMP_HandleTypeDef* hopamp) +{ + HAL_StatusTypeDef status = HAL_OK; + + uint32_t* opamp_trimmingvalue = 0; + uint32_t opamp_trimmingvaluen = 0; + uint32_t opamp_trimmingvaluep = 0; + + uint32_t trimming_diff_pair = 0; /* Selection of differential transistors pair high or low */ + + __IO uint32_t* tmp_opamp_reg_trimming; /* Selection of register of trimming depending on power mode: OTR or LPOTR */ + uint32_t tmp_opamp_otr_otuser = 0; /* Selection of bit OPAMP_OTR_OT_USER depending on trimming register pointed: OTR or LPOTR */ + + uint32_t tmp_Opaxcalout_DefaultSate = 0; /* Bit OPAMP_CSR_OPAXCALOUT default state when trimming value is 00000b. Used to detect the bit toggling */ + + uint32_t tmp_OpaxSwitchesContextBackup = 0; + + uint8_t trimming_diff_pair_iteration_count = 0; /* For calibration loop algorithm: to repeat the calibration loop for both differential transistors pair high and low */ + uint8_t delta = 0; /* For calibration loop algorithm: Variable for dichotomy steps value */ + uint8_t final_step_check = 0; /* For calibration loop algorithm: Flag for additional check of last trimming step */ + + /* Check the OPAMP handle allocation */ + /* Check if OPAMP locked */ + if((hopamp == NULL) || (hopamp->State == HAL_OPAMP_STATE_BUSYLOCKED)) + { + status = HAL_ERROR; + } + else + { + + /* Check if OPAMP in calibration mode and calibration not yet enable */ + if(hopamp->State == HAL_OPAMP_STATE_READY) + { + /* Check the parameter */ + assert_param(IS_OPAMP_ALL_INSTANCE(hopamp->Instance)); + assert_param(IS_OPAMP_POWERMODE(hopamp->Init.PowerMode)); + + /* Update OPAMP state */ + hopamp->State = HAL_OPAMP_STATE_CALIBBUSY; + + /* Backup of switches configuration to restore it at the end of the */ + /* calibration. */ + tmp_OpaxSwitchesContextBackup = READ_BIT(OPAMP->CSR, OPAMP_CSR_ALL_SWITCHES(hopamp)); + + /* Open all switches on non-inverting input, inverting input and output */ + /* feedback. */ + CLEAR_BIT(OPAMP->CSR, OPAMP_CSR_ALL_SWITCHES(hopamp)); + + /* Set calibration mode to user programmed trimming values */ + SET_BIT(OPAMP->OTR, OPAMP_OTR_OT_USER); + + + /* Select trimming settings depending on power mode */ + if (hopamp->Init.PowerMode == OPAMP_POWERMODE_NORMAL) + { + tmp_opamp_otr_otuser = OPAMP_OTR_OT_USER; + tmp_opamp_reg_trimming = &OPAMP->OTR; + } + else + { + tmp_opamp_otr_otuser = 0x00000000; + tmp_opamp_reg_trimming = &OPAMP->LPOTR; + } + + + /* Enable the selected opamp */ + CLEAR_BIT (OPAMP->CSR, OPAMP_CSR_OPAXPD(hopamp)); + + /* Perform trimming for both differential transistors pair high and low */ + for (trimming_diff_pair_iteration_count = 0; trimming_diff_pair_iteration_count <=1; trimming_diff_pair_iteration_count++) + { + if (trimming_diff_pair_iteration_count == 0) + { + /* Calibration of transistors differential pair high (NMOS) */ + trimming_diff_pair = OPAMP_FACTORYTRIMMING_N; + opamp_trimmingvalue = &opamp_trimmingvaluen; + + /* Set bit OPAMP_CSR_OPAXCALOUT default state when trimming value */ + /* is 00000b. Used to detect the bit toggling during trimming. */ + tmp_Opaxcalout_DefaultSate = RESET; + + /* Enable calibration for N differential pair */ + MODIFY_REG(OPAMP->CSR, OPAMP_CSR_OPAXCAL_L(hopamp), + OPAMP_CSR_OPAXCAL_H(hopamp) ); + } + else /* (trimming_diff_pair_iteration_count == 1) */ + { + /* Calibration of transistors differential pair low (PMOS) */ + trimming_diff_pair = OPAMP_FACTORYTRIMMING_P; + opamp_trimmingvalue = &opamp_trimmingvaluep; + + /* Set bit OPAMP_CSR_OPAXCALOUT default state when trimming value */ + /* is 00000b. Used to detect the bit toggling during trimming. */ + tmp_Opaxcalout_DefaultSate = OPAMP_CSR_OPAXCALOUT(hopamp); + + /* Enable calibration for P differential pair */ + MODIFY_REG(OPAMP->CSR, OPAMP_CSR_OPAXCAL_H(hopamp), + OPAMP_CSR_OPAXCAL_L(hopamp) ); + } + + + /* Perform calibration parameter search by dichotomy sweep */ + /* - Delta initial value 16: for 5 dichotomy steps: 16 for the */ + /* initial range, then successive delta sweeps (8, 4, 2, 1). */ + /* can extend the search range to +/- 15 units. */ + /* - Trimming initial value 15: search range will go from 0 to 30 */ + /* (Trimming value 31 is forbidden). */ + /* Note: After dichotomy sweep, the trimming result is determined. */ + /* However, the final trimming step is deduced from previous */ + /* trimming steps tested but is not effectively tested. */ + /* An additional test step (using variable "final_step_check") */ + /* allow to Test the final trimming step. */ + *opamp_trimmingvalue = 15; + delta = 16; + + while ((delta != 0) || (final_step_check == 1)) + { + /* Set candidate trimming */ + MODIFY_REG(*tmp_opamp_reg_trimming, OPAMP_OFFSET_TRIM_SET(hopamp, trimming_diff_pair, OPAMP_TRIM_VALUE_MASK) , + OPAMP_OFFSET_TRIM_SET(hopamp, trimming_diff_pair, *opamp_trimmingvalue) | tmp_opamp_otr_otuser); + + /* Offset trimming time: during calibration, minimum time needed */ + /* between two steps to have 1 mV accuracy. */ + HAL_Delay(OPAMP_TRIMMING_DELAY); + + /* Set flag for additional check of last trimming step equal to */ + /* dichotomy step before its division by 2 (equivalent to previous */ + /* value of dichotomy step). */ + final_step_check = delta; + + /* Divide range by 2 to continue dichotomy sweep */ + delta >>= 1; + + /* Set trimming values for next iteration in function of trimming */ + /* result toggle (versus initial state). */ + /* Note: on the last trimming loop, delta is equal to 0 and */ + /* therefore has no effect. */ + if (READ_BIT(OPAMP->CSR, OPAMP_CSR_OPAXCALOUT(hopamp)) != tmp_Opaxcalout_DefaultSate) + { + /* If calibration output is has toggled, try lower trimming */ + *opamp_trimmingvalue -= delta; + } + else + { + /* If calibration output is has not toggled, try higher trimming */ + *opamp_trimmingvalue += delta; + } + + } + + /* Check trimming result of the selected step and perform final fine */ + /* trimming. */ + /* - If calibration output is has toggled: the current step is */ + /* already optimized. */ + /* - If calibration output is has not toggled: the current step can */ + /* be optimized by incrementing it of one step. */ + if (READ_BIT(OPAMP->CSR, OPAMP_CSR_OPAXCALOUT(hopamp)) == tmp_Opaxcalout_DefaultSate) + { + *opamp_trimmingvalue += 1; + + /* Set final fine trimming */ + MODIFY_REG(*tmp_opamp_reg_trimming, OPAMP_OFFSET_TRIM_SET(hopamp, trimming_diff_pair, OPAMP_TRIM_VALUE_MASK) , + OPAMP_OFFSET_TRIM_SET(hopamp, trimming_diff_pair, *opamp_trimmingvalue) | tmp_opamp_otr_otuser); + } + + } + + + /* Disable calibration for P and N differential pairs */ + /* Disable the selected opamp */ + CLEAR_BIT (OPAMP->CSR, (OPAMP_CSR_OPAXCAL_H(hopamp) | + OPAMP_CSR_OPAXCAL_L(hopamp) | + OPAMP_CSR_OPAXPD(hopamp)) ); + + /* Backup of switches configuration to restore it at the end of the */ + /* calibration. */ + SET_BIT(OPAMP->CSR, tmp_OpaxSwitchesContextBackup); + + /* Self calibration is successful */ + /* Store calibration (user trimming) results in init structure. */ + + /* Set user trimming mode */ + hopamp->Init.UserTrimming = OPAMP_TRIMMING_USER; + + /* Affect calibration parameters depending on mode normal/low power */ + if (hopamp->Init.PowerMode != OPAMP_POWERMODE_LOWPOWER) + { + /* Write calibration result N */ + hopamp->Init.TrimmingValueN = opamp_trimmingvaluen; + /* Write calibration result P */ + hopamp->Init.TrimmingValueP = opamp_trimmingvaluep; + } + else + { + /* Write calibration result N */ + hopamp->Init.TrimmingValueNLowPower = opamp_trimmingvaluen; + /* Write calibration result P */ + hopamp->Init.TrimmingValuePLowPower = opamp_trimmingvaluep; + } + + /* Update OPAMP state */ + hopamp->State = HAL_OPAMP_STATE_READY; + + } + + else + { + /* OPAMP can not be calibrated from this mode */ + status = HAL_ERROR; + } + } + + return status; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup OPAMP_Exported_Functions_Group3 Peripheral Control functions + * @brief Peripheral Control functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the OPAMP data + transfers. + + + +@endverbatim + * @{ + */ + +/** + * @brief Lock the selected opamp configuration. + * Caution: On STM32L1, HAL OPAMP lock is software lock only + * (not hardware lock as available on some other STM32 devices) + * @param hopamp: OPAMP handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_OPAMP_Lock(OPAMP_HandleTypeDef* hopamp) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the OPAMP handle allocation */ + /* Check if OPAMP locked */ + /* OPAMP can be locked when enabled and running in normal mode */ + /* It is meaningless otherwise */ + if((hopamp == NULL) || (hopamp->State == HAL_OPAMP_STATE_RESET) \ + || (hopamp->State == HAL_OPAMP_STATE_READY) \ + || (hopamp->State == HAL_OPAMP_STATE_CALIBBUSY)\ + || (hopamp->State == HAL_OPAMP_STATE_BUSYLOCKED)) + + { + status = HAL_ERROR; + } + + else + { + /* Check the parameter */ + assert_param(IS_OPAMP_ALL_INSTANCE(hopamp->Instance)); + + /* OPAMP state changed to locked */ + hopamp->State = HAL_OPAMP_STATE_BUSYLOCKED; + } + return status; +} + +/** + * @brief Return the OPAMP factory trimming value + * Caution: On STM32L1 OPAMP, user can retrieve factory trimming if + * OPAMP has never been set to user trimming before. + * Therefore, this fonction must be called when OPAMP init + * parameter "UserTrimming" is set to trimming factory, + * and before OPAMP calibration (function + * "HAL_OPAMP_SelfCalibrate()"). + * Otherwise, factory triming value cannot be retrieved and + * error status is returned. + * @param hopamp : OPAMP handle + * @param trimmingoffset : Trimming offset (P or N) + * This parameter must be a value of @ref OPAMP_FactoryTrimming + * @note Calibration parameter retrieved is corresponding to the mode + * specified in OPAMP init structure (mode normal or low-power). + * To retrieve calibration parameters for both modes, repeat this + * function after OPAMP init structure accordingly updated. + * @retval Trimming value (P or N): range: 0->31 + * or OPAMP_FACTORYTRIMMING_DUMMY if trimming value is not available + * + */ +HAL_OPAMP_TrimmingValueTypeDef HAL_OPAMP_GetTrimOffset (OPAMP_HandleTypeDef *hopamp, uint32_t trimmingoffset) +{ + HAL_OPAMP_TrimmingValueTypeDef trimmingvalue; + __IO uint32_t* tmp_opamp_reg_trimming; /* Selection of register of trimming depending on power mode: OTR or LPOTR */ + + /* Check the OPAMP handle allocation */ + /* Value can be retrieved in HAL_OPAMP_STATE_READY state */ + if((hopamp == NULL) || (hopamp->State == HAL_OPAMP_STATE_RESET) + || (hopamp->State == HAL_OPAMP_STATE_BUSY) + || (hopamp->State == HAL_OPAMP_STATE_CALIBBUSY) + || (hopamp->State == HAL_OPAMP_STATE_BUSYLOCKED)) + { + trimmingvalue = OPAMP_FACTORYTRIMMING_DUMMY; + } + else + { + /* Check the parameter */ + assert_param(IS_OPAMP_ALL_INSTANCE(hopamp->Instance)); + assert_param(IS_OPAMP_FACTORYTRIMMING(trimmingoffset)); + assert_param(IS_OPAMP_POWERMODE(hopamp->Init.PowerMode)); + + /* Check the trimming mode */ + if (hopamp->Init.UserTrimming == OPAMP_TRIMMING_USER) + { + /* This fonction must called when OPAMP init parameter "UserTrimming" */ + /* is set to trimming factory, and before OPAMP calibration (function */ + /* "HAL_OPAMP_SelfCalibrate()"). */ + /* Otherwise, factory triming value cannot be retrieved and error */ + /* status is returned. */ + trimmingvalue = OPAMP_FACTORYTRIMMING_DUMMY; + } + else + { + /* Select trimming settings depending on power mode */ + if (hopamp->Init.PowerMode == OPAMP_POWERMODE_NORMAL) + { + tmp_opamp_reg_trimming = &OPAMP->OTR; + } + else + { + tmp_opamp_reg_trimming = &OPAMP->LPOTR; + } + + /* Get factory trimming */ + trimmingvalue = ((*tmp_opamp_reg_trimming >> OPAMP_OFFSET_TRIM_BITSPOSITION(hopamp, trimmingoffset)) & OPAMP_TRIM_VALUE_MASK); + } + } + + return trimmingvalue; +} + +/** + * @} + */ + + +/** @defgroup OPAMP_Exported_Functions_Group4 Peripheral State functions + * @brief Peripheral State functions + * +@verbatim + =============================================================================== + ##### Peripheral State functions ##### + =============================================================================== + [..] + This subsection permit to get in run-time the status of the peripheral. + +@endverbatim + * @{ + */ + +/** + * @brief Return the OPAMP state + * @param hopamp : OPAMP handle + * @retval HAL state + */ +HAL_OPAMP_StateTypeDef HAL_OPAMP_GetState(OPAMP_HandleTypeDef* hopamp) +{ + /* Check the OPAMP handle allocation */ + if(hopamp == NULL) + { + return HAL_OPAMP_STATE_RESET; + } + + /* Check the parameter */ + assert_param(IS_OPAMP_ALL_INSTANCE(hopamp->Instance)); + + return hopamp->State; +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX || STM32L162xC || STM32L152xC || STM32L151xC */ + +#endif /* HAL_OPAMP_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_opamp_ex.c b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_opamp_ex.c new file mode 100755 index 0000000..56c0f51 --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_opamp_ex.c @@ -0,0 +1,824 @@ +/** + ****************************************************************************** + * @file stm32l1xx_hal_opamp_ex.c + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief Extended OPAMP HAL module driver. + * + * This file provides firmware functions to manage the following + * functionalities of the operational amplifier(s)(OPAMP1, OPAMP2 etc) + * peripheral: + * + Extended Initialization and de-initialization functions + * + Extended Peripheral Control functions + * + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_hal.h" + +#ifdef HAL_OPAMP_MODULE_ENABLED + +#if defined (STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined (STM32L151xE) || defined (STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) || defined (STM32L162xC) || defined (STM32L152xC) || defined (STM32L151xC) + +/** @addtogroup STM32L1xx_HAL_Driver + * @{ + */ + +/** @defgroup OPAMPEx OPAMPEx + * @brief OPAMP Extended HAL module driver. + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup OPAMPEx_Exported_Functions OPAMPEx Exported Functions + * @{ + */ + +/** @addtogroup OPAMPEx_Exported_Functions_Group1 + * @brief Extended operation functions + * +@verbatim + =============================================================================== + ##### Extended IO operation functions ##### + =============================================================================== + [..] + (+) OPAMP Self calibration. + +@endverbatim + * @{ + */ + +#if defined (STM32L151xD) || defined (STM32L152xD) || defined (STM32L162xD) + +/* 3 OPAMPS available */ +/* 3 OPAMPS can be calibrated in parallel */ + +/** + * @brief Run the self calibration of the 3 OPAMPs in parallel. + * @note Trimming values (PMOS & NMOS) are updated and user trimming is + * enabled is calibration is succesful. + * @note Calibration is performed in the mode specified in OPAMP init + * structure (mode normal or low-power). To perform calibration for + * both modes, repeat this function twice after OPAMP init structure + * accordingly updated. + * @note Calibration runs about 10 ms (5 dichotmy steps, repeated for P + * and N transistors: 10 steps with 1 ms for each step). + * @param hopamp1 handle + * @param hopamp2 handle + * @param hopamp3 handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_OPAMPEx_SelfCalibrateAll(OPAMP_HandleTypeDef *hopamp1, OPAMP_HandleTypeDef *hopamp2, OPAMP_HandleTypeDef *hopamp3) +{ + HAL_StatusTypeDef status = HAL_OK; + + uint32_t* opamp1_trimmingvalue = 0; + uint32_t opamp1_trimmingvaluen = 0; + uint32_t opamp1_trimmingvaluep = 0; + + uint32_t* opamp2_trimmingvalue = 0; + uint32_t opamp2_trimmingvaluen = 0; + uint32_t opamp2_trimmingvaluep = 0; + + uint32_t* opamp3_trimmingvalue = 0; + uint32_t opamp3_trimmingvaluen = 0; + uint32_t opamp3_trimmingvaluep = 0; + + uint32_t trimming_diff_pair = 0; /* Selection of differential transistors pair high or low */ + + __IO uint32_t* tmp_opamp1_reg_trimming; /* Selection of register of trimming depending on power mode: OTR or LPOTR */ + __IO uint32_t* tmp_opamp2_reg_trimming; + __IO uint32_t* tmp_opamp3_reg_trimming; + uint32_t tmp_opamp1_otr_otuser = 0; /* Selection of bit OPAMP_OTR_OT_USER depending on trimming register pointed: OTR or LPOTR */ + uint32_t tmp_opamp2_otr_otuser = 0; + uint32_t tmp_opamp3_otr_otuser = 0; + + uint32_t tmp_Opa1calout_DefaultSate = 0; /* Bit OPAMP_CSR_OPA1CALOUT default state when trimming value is 00000b. Used to detect the bit toggling */ + uint32_t tmp_Opa2calout_DefaultSate = 0; /* Bit OPAMP_CSR_OPA2CALOUT default state when trimming value is 00000b. Used to detect the bit toggling */ + uint32_t tmp_Opa3calout_DefaultSate = 0; /* Bit OPAMP_CSR_OPA3CALOUT default state when trimming value is 00000b. Used to detect the bit toggling */ + + uint32_t tmp_OpaxSwitchesContextBackup = 0; + + uint8_t trimming_diff_pair_iteration_count = 0; /* For calibration loop algorithm: to repeat the calibration loop for both differential transistors pair high and low */ + uint8_t delta = 0; /* For calibration loop algorithm: Variable for dichotomy steps value */ + uint8_t final_step_check = 0; /* For calibration loop algorithm: Flag for additional check of last trimming step */ + + /* Check the OPAMP handle allocation */ + /* Check if OPAMP locked */ + if((hopamp1 == NULL) || (hopamp1->State == HAL_OPAMP_STATE_BUSYLOCKED) || + (hopamp2 == NULL) || (hopamp2->State == HAL_OPAMP_STATE_BUSYLOCKED) || + (hopamp3 == NULL) || (hopamp3->State == HAL_OPAMP_STATE_BUSYLOCKED) ) + { + status = HAL_ERROR; + } + else + { + + /* Check if OPAMP in calibration mode and calibration not yet enable */ + if((hopamp1->State == HAL_OPAMP_STATE_READY) && + (hopamp2->State == HAL_OPAMP_STATE_READY) && + (hopamp3->State == HAL_OPAMP_STATE_READY) ) + { + /* Check the parameter */ + assert_param(IS_OPAMP_ALL_INSTANCE(hopamp1->Instance)); + assert_param(IS_OPAMP_ALL_INSTANCE(hopamp2->Instance)); + assert_param(IS_OPAMP_ALL_INSTANCE(hopamp3->Instance)); + assert_param(IS_OPAMP_POWERMODE(hopamp1->Init.PowerMode)); + assert_param(IS_OPAMP_POWERMODE(hopamp2->Init.PowerMode)); + assert_param(IS_OPAMP_POWERMODE(hopamp3->Init.PowerMode)); + + /* Update OPAMP state */ + hopamp1->State = HAL_OPAMP_STATE_CALIBBUSY; + hopamp2->State = HAL_OPAMP_STATE_CALIBBUSY; + hopamp3->State = HAL_OPAMP_STATE_CALIBBUSY; + + /* Backup of switches configuration to restore it at the end of the */ + /* calibration. */ + tmp_OpaxSwitchesContextBackup = READ_BIT(OPAMP->CSR, OPAMP_CSR_ALL_SWITCHES_ALL_OPAMPS); + + /* Open all switches on non-inverting input, inverting input and output */ + /* feedback. */ + CLEAR_BIT(OPAMP->CSR, OPAMP_CSR_ALL_SWITCHES_ALL_OPAMPS); + + /* Set calibration mode to user programmed trimming values */ + SET_BIT(OPAMP->OTR, OPAMP_OTR_OT_USER); + + /* Select trimming settings depending on power mode */ + if (hopamp1->Init.PowerMode == OPAMP_POWERMODE_NORMAL) + { + tmp_opamp1_otr_otuser = OPAMP_OTR_OT_USER; + tmp_opamp1_reg_trimming = &OPAMP->OTR; + } + else + { + tmp_opamp1_otr_otuser = 0x00000000; + tmp_opamp1_reg_trimming = &OPAMP->LPOTR; + } + + if (hopamp2->Init.PowerMode == OPAMP_POWERMODE_NORMAL) + { + tmp_opamp2_otr_otuser = OPAMP_OTR_OT_USER; + tmp_opamp2_reg_trimming = &OPAMP->OTR; + } + else + { + tmp_opamp2_otr_otuser = 0x00000000; + tmp_opamp2_reg_trimming = &OPAMP->LPOTR; + } + + if (hopamp3->Init.PowerMode == OPAMP_POWERMODE_NORMAL) + { + tmp_opamp3_otr_otuser = OPAMP_OTR_OT_USER; + tmp_opamp3_reg_trimming = &OPAMP->OTR; + } + else + { + tmp_opamp3_otr_otuser = 0x00000000; + tmp_opamp3_reg_trimming = &OPAMP->LPOTR; + } + + /* Enable the selected opamp */ + CLEAR_BIT (OPAMP->CSR, OPAMP_CSR_OPAXPD_ALL); + + /* Perform trimming for both differential transistors pair high and low */ + for (trimming_diff_pair_iteration_count = 0; trimming_diff_pair_iteration_count <=1; trimming_diff_pair_iteration_count++) + { + if (trimming_diff_pair_iteration_count == 0) + { + /* Calibration of transistors differential pair high (NMOS) */ + trimming_diff_pair = OPAMP_FACTORYTRIMMING_N; + opamp1_trimmingvalue = &opamp1_trimmingvaluen; + opamp2_trimmingvalue = &opamp2_trimmingvaluen; + opamp3_trimmingvalue = &opamp3_trimmingvaluen; + + /* Set bit OPAMP_CSR_OPAXCALOUT default state when trimming value */ + /* is 00000b. Used to detect the bit toggling during trimming. */ + tmp_Opa1calout_DefaultSate = RESET; + tmp_Opa2calout_DefaultSate = RESET; + tmp_Opa3calout_DefaultSate = RESET; + + /* Enable calibration for N differential pair */ + MODIFY_REG(OPAMP->CSR, OPAMP_CSR_OPAXCAL_L_ALL, + OPAMP_CSR_OPAXCAL_H_ALL); + } + else /* (trimming_diff_pair_iteration_count == 1) */ + { + /* Calibration of transistors differential pair low (PMOS) */ + trimming_diff_pair = OPAMP_FACTORYTRIMMING_P; + opamp1_trimmingvalue = &opamp1_trimmingvaluep; + opamp2_trimmingvalue = &opamp2_trimmingvaluep; + opamp3_trimmingvalue = &opamp3_trimmingvaluep; + + /* Set bit OPAMP_CSR_OPAXCALOUT default state when trimming value */ + /* is 00000b. Used to detect the bit toggling during trimming. */ + tmp_Opa1calout_DefaultSate = OPAMP_CSR_OPAXCALOUT(hopamp1); + tmp_Opa2calout_DefaultSate = OPAMP_CSR_OPAXCALOUT(hopamp2); + tmp_Opa3calout_DefaultSate = OPAMP_CSR_OPAXCALOUT(hopamp3); + + /* Enable calibration for P differential pair */ + MODIFY_REG(OPAMP->CSR, OPAMP_CSR_OPAXCAL_H_ALL, + OPAMP_CSR_OPAXCAL_L_ALL); + } + + + /* Perform calibration parameter search by dichotomy sweep */ + /* - Delta initial value 16: for 5 dichotomy steps: 16 for the */ + /* initial range, then successive delta sweeps (8, 4, 2, 1). */ + /* can extend the search range to +/- 15 units. */ + /* - Trimming initial value 15: search range will go from 0 to 30 */ + /* (Trimming value 31 is forbidden). */ + /* Note: After dichotomy sweep, the trimming result is determined. */ + /* However, the final trimming step is deduced from previous */ + /* trimming steps tested but is not effectively tested. */ + /* An additional test step (using variable "final_step_check") */ + /* allow to Test the final trimming step. */ + *opamp1_trimmingvalue = 15; + *opamp2_trimmingvalue = 15; + *opamp3_trimmingvalue = 15; + delta = 16; + + while ((delta != 0) || (final_step_check == 1)) + { + /* Set candidate trimming */ + MODIFY_REG(*tmp_opamp1_reg_trimming, OPAMP_OFFSET_TRIM_SET(hopamp1, trimming_diff_pair, OPAMP_TRIM_VALUE_MASK) , + OPAMP_OFFSET_TRIM_SET(hopamp1, trimming_diff_pair, *opamp1_trimmingvalue) | tmp_opamp1_otr_otuser); + + MODIFY_REG(*tmp_opamp2_reg_trimming, OPAMP_OFFSET_TRIM_SET(hopamp2, trimming_diff_pair, OPAMP_TRIM_VALUE_MASK) , + OPAMP_OFFSET_TRIM_SET(hopamp2, trimming_diff_pair, *opamp2_trimmingvalue) | tmp_opamp2_otr_otuser); + + MODIFY_REG(*tmp_opamp3_reg_trimming, OPAMP_OFFSET_TRIM_SET(hopamp3, trimming_diff_pair, OPAMP_TRIM_VALUE_MASK) , + OPAMP_OFFSET_TRIM_SET(hopamp3, trimming_diff_pair, *opamp3_trimmingvalue) | tmp_opamp3_otr_otuser); + + /* Offset trimming time: during calibration, minimum time needed */ + /* between two steps to have 1 mV accuracy. */ + HAL_Delay(OPAMP_TRIMMING_DELAY); + + /* Set flag for additional check of last trimming step equal to */ + /* dichotomy step before its division by 2 (equivalent to previous */ + /* value of dichotomy step). */ + final_step_check = delta; + + /* Divide range by 2 to continue dichotomy sweep */ + delta >>= 1; + + /* Set trimming values for next iteration in function of trimming */ + /* result toggle (versus initial state). */ + /* Trimming values update with dichotomy delta of previous */ + /* iteration. */ + /* Note: on the last trimming loop, delta is equal to 0 and */ + /* therefore has no effect. */ + if (READ_BIT(OPAMP->CSR, OPAMP_CSR_OPAXCALOUT(hopamp1)) != tmp_Opa1calout_DefaultSate) + { + /* If calibration output is has toggled, try lower trimming */ + *opamp1_trimmingvalue -= delta; + } + else + { + /* If calibration output is has not toggled, try higher trimming */ + *opamp1_trimmingvalue += delta; + } + + if (READ_BIT(OPAMP->CSR, OPAMP_CSR_OPAXCALOUT(hopamp2)) != tmp_Opa2calout_DefaultSate) + { + /* If calibration output is has toggled, try lower trimming */ + *opamp2_trimmingvalue -= delta; + } + else + { + /* If calibration output is has not toggled, try higher trimming */ + *opamp2_trimmingvalue += delta; + } + + if (READ_BIT(OPAMP->CSR, OPAMP_CSR_OPAXCALOUT(hopamp3)) != tmp_Opa3calout_DefaultSate) + { + /* If calibration output is has toggled, try lower trimming */ + *opamp3_trimmingvalue -= delta; + } + else + { + /* If calibration output is has not toggled, try higher trimming */ + *opamp3_trimmingvalue += delta; + } + } + + /* Check trimming result of the selected step and perform final fine */ + /* trimming. */ + /* - If calibration output is has toggled: the current step is */ + /* already optimized. */ + /* - If calibration output is has not toggled: the current step can */ + /* be optimized by incrementing it of one step. */ + if (READ_BIT(OPAMP->CSR, OPAMP_CSR_OPAXCALOUT(hopamp1)) == tmp_Opa1calout_DefaultSate) + { + *opamp1_trimmingvalue += 1; + + /* Set final fine trimming */ + MODIFY_REG(*tmp_opamp1_reg_trimming, OPAMP_OFFSET_TRIM_SET(hopamp1, trimming_diff_pair, OPAMP_TRIM_VALUE_MASK) , + OPAMP_OFFSET_TRIM_SET(hopamp1, trimming_diff_pair, *opamp1_trimmingvalue) | tmp_opamp1_otr_otuser); + } + if (READ_BIT(OPAMP->CSR, OPAMP_CSR_OPAXCALOUT(hopamp2)) == tmp_Opa2calout_DefaultSate) + { + *opamp2_trimmingvalue += 1; + + /* Set final fine trimming */ + MODIFY_REG(*tmp_opamp2_reg_trimming, OPAMP_OFFSET_TRIM_SET(hopamp2, trimming_diff_pair, OPAMP_TRIM_VALUE_MASK) , + OPAMP_OFFSET_TRIM_SET(hopamp2, trimming_diff_pair, *opamp2_trimmingvalue) | tmp_opamp2_otr_otuser); + } + if (READ_BIT(OPAMP->CSR, OPAMP_CSR_OPAXCALOUT(hopamp3)) == tmp_Opa3calout_DefaultSate) + { + *opamp3_trimmingvalue += 1; + + /* Set final fine trimming */ + MODIFY_REG(*tmp_opamp3_reg_trimming, OPAMP_OFFSET_TRIM_SET(hopamp3, trimming_diff_pair, OPAMP_TRIM_VALUE_MASK) , + OPAMP_OFFSET_TRIM_SET(hopamp3, trimming_diff_pair, *opamp3_trimmingvalue) | tmp_opamp3_otr_otuser); + } + + } + + + /* Disable calibration for P and N differential pairs */ + /* Disable the selected opamp */ + CLEAR_BIT (OPAMP->CSR, (OPAMP_CSR_OPAXCAL_H_ALL | + OPAMP_CSR_OPAXCAL_L_ALL | + OPAMP_CSR_OPAXPD_ALL )); + + /* Backup of switches configuration to restore it at the end of the */ + /* calibration. */ + SET_BIT(OPAMP->CSR, tmp_OpaxSwitchesContextBackup); + + /* Self calibration is successful */ + /* Store calibration (user trimming) results in init structure. */ + + /* Set user trimming mode */ + hopamp1->Init.UserTrimming = OPAMP_TRIMMING_USER; + hopamp2->Init.UserTrimming = OPAMP_TRIMMING_USER; + hopamp3->Init.UserTrimming = OPAMP_TRIMMING_USER; + + /* Affect calibration parameters depending on mode normal/low power */ + if (hopamp1->Init.PowerMode != OPAMP_POWERMODE_LOWPOWER) + { + /* Write calibration result N */ + hopamp1->Init.TrimmingValueN = opamp1_trimmingvaluen; + /* Write calibration result P */ + hopamp1->Init.TrimmingValueP = opamp1_trimmingvaluep; + } + else + { + /* Write calibration result N */ + hopamp1->Init.TrimmingValueNLowPower = opamp1_trimmingvaluen; + /* Write calibration result P */ + hopamp1->Init.TrimmingValuePLowPower = opamp1_trimmingvaluep; + } + + if (hopamp2->Init.PowerMode != OPAMP_POWERMODE_LOWPOWER) + { + /* Write calibration result N */ + hopamp2->Init.TrimmingValueN = opamp2_trimmingvaluen; + /* Write calibration result P */ + hopamp2->Init.TrimmingValueP = opamp2_trimmingvaluep; + } + else + { + /* Write calibration result N */ + hopamp2->Init.TrimmingValueNLowPower = opamp2_trimmingvaluen; + /* Write calibration result P */ + hopamp2->Init.TrimmingValuePLowPower = opamp2_trimmingvaluep; + } + + if (hopamp3->Init.PowerMode != OPAMP_POWERMODE_LOWPOWER) + { + /* Write calibration result N */ + hopamp3->Init.TrimmingValueN = opamp3_trimmingvaluen; + /* Write calibration result P */ + hopamp3->Init.TrimmingValueP = opamp3_trimmingvaluep; + } + else + { + /* Write calibration result N */ + hopamp3->Init.TrimmingValueNLowPower = opamp3_trimmingvaluen; + /* Write calibration result P */ + hopamp3->Init.TrimmingValuePLowPower = opamp3_trimmingvaluep; + } + + /* Update OPAMP state */ + hopamp1->State = HAL_OPAMP_STATE_READY; + hopamp2->State = HAL_OPAMP_STATE_READY; + hopamp3->State = HAL_OPAMP_STATE_READY; + + } + else + { + /* OPAMP can not be calibrated from this mode */ + status = HAL_ERROR; + } + } + + return status; +} + +#else + +/* 2 OPAMPS available */ +/* 2 OPAMPS can be calibrated in parallel */ + +/** + * @brief Run the self calibration of the 2 OPAMPs in parallel. + * @note Trimming values (PMOS & NMOS) are updated and user trimming is + * enabled is calibration is succesful. + * @note Calibration is performed in the mode specified in OPAMP init + * structure (mode normal or low-power). To perform calibration for + * both modes, repeat this function twice after OPAMP init structure + * accordingly updated. + * @note Calibration runs about 10 ms (5 dichotmy steps, repeated for P + * and N transistors: 10 steps with 1 ms for each step). + * @param hopamp1 handle + * @param hopamp2 handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_OPAMPEx_SelfCalibrateAll(OPAMP_HandleTypeDef *hopamp1, OPAMP_HandleTypeDef *hopamp2) +{ + HAL_StatusTypeDef status = HAL_OK; + + uint32_t* opamp1_trimmingvalue = 0; + uint32_t opamp1_trimmingvaluen = 0; + uint32_t opamp1_trimmingvaluep = 0; + + uint32_t* opamp2_trimmingvalue = 0; + uint32_t opamp2_trimmingvaluen = 0; + uint32_t opamp2_trimmingvaluep = 0; + + uint32_t trimming_diff_pair = 0; /* Selection of differential transistors pair high or low */ + + __IO uint32_t* tmp_opamp1_reg_trimming; /* Selection of register of trimming depending on power mode: OTR or LPOTR */ + __IO uint32_t* tmp_opamp2_reg_trimming; + uint32_t tmp_opamp1_otr_otuser = 0; /* Selection of bit OPAMP_OTR_OT_USER depending on trimming register pointed: OTR or LPOTR */ + uint32_t tmp_opamp2_otr_otuser = 0; + + uint32_t tmp_Opa1calout_DefaultSate = 0; /* Bit OPAMP_CSR_OPA1CALOUT default state when trimming value is 00000b. Used to detect the bit toggling */ + uint32_t tmp_Opa2calout_DefaultSate = 0; /* Bit OPAMP_CSR_OPA2CALOUT default state when trimming value is 00000b. Used to detect the bit toggling */ + + uint32_t tmp_OpaxSwitchesContextBackup = 0; + + uint8_t trimming_diff_pair_iteration_count = 0; /* For calibration loop algorithm: to repeat the calibration loop for both differential transistors pair high and low */ + uint8_t delta = 0; /* For calibration loop algorithm: Variable for dichotomy steps value */ + uint8_t final_step_check = 0; /* For calibration loop algorithm: Flag for additional check of last trimming step */ + + /* Check the OPAMP handle allocation */ + /* Check if OPAMP locked */ + if((hopamp1 == NULL) || (hopamp1->State == HAL_OPAMP_STATE_BUSYLOCKED) || + (hopamp2 == NULL) || (hopamp2->State == HAL_OPAMP_STATE_BUSYLOCKED) ) + { + status = HAL_ERROR; + } + else + { + + /* Check if OPAMP in calibration mode and calibration not yet enable */ + if((hopamp1->State == HAL_OPAMP_STATE_READY) && + (hopamp2->State == HAL_OPAMP_STATE_READY) ) + { + /* Check the parameter */ + assert_param(IS_OPAMP_ALL_INSTANCE(hopamp1->Instance)); + assert_param(IS_OPAMP_ALL_INSTANCE(hopamp2->Instance)); + assert_param(IS_OPAMP_POWERMODE(hopamp1->Init.PowerMode)); + assert_param(IS_OPAMP_POWERMODE(hopamp2->Init.PowerMode)); + + /* Update OPAMP state */ + hopamp1->State = HAL_OPAMP_STATE_CALIBBUSY; + hopamp2->State = HAL_OPAMP_STATE_CALIBBUSY; + + /* Backup of switches configuration to restore it at the end of the */ + /* calibration. */ + tmp_OpaxSwitchesContextBackup = READ_BIT(OPAMP->CSR, OPAMP_CSR_ALL_SWITCHES_ALL_OPAMPS); + + /* Open all switches on non-inverting input, inverting input and output */ + /* feedback. */ + CLEAR_BIT(OPAMP->CSR, OPAMP_CSR_ALL_SWITCHES_ALL_OPAMPS); + + /* Set calibration mode to user programmed trimming values */ + SET_BIT(OPAMP->OTR, OPAMP_OTR_OT_USER); + + /* Select trimming settings depending on power mode */ + if (hopamp1->Init.PowerMode == OPAMP_POWERMODE_NORMAL) + { + tmp_opamp1_otr_otuser = OPAMP_OTR_OT_USER; + tmp_opamp1_reg_trimming = &OPAMP->OTR; + } + else + { + tmp_opamp1_otr_otuser = 0x00000000; + tmp_opamp1_reg_trimming = &OPAMP->LPOTR; + } + + if (hopamp2->Init.PowerMode == OPAMP_POWERMODE_NORMAL) + { + tmp_opamp2_otr_otuser = OPAMP_OTR_OT_USER; + tmp_opamp2_reg_trimming = &OPAMP->OTR; + } + else + { + tmp_opamp2_otr_otuser = 0x00000000; + tmp_opamp2_reg_trimming = &OPAMP->LPOTR; + } + + /* Enable the selected opamp */ + CLEAR_BIT (OPAMP->CSR, OPAMP_CSR_OPAXPD_ALL); + + /* Perform trimming for both differential transistors pair high and low */ + for (trimming_diff_pair_iteration_count = 0; trimming_diff_pair_iteration_count <=1; trimming_diff_pair_iteration_count++) + { + if (trimming_diff_pair_iteration_count == 0) + { + /* Calibration of transistors differential pair high (NMOS) */ + trimming_diff_pair = OPAMP_FACTORYTRIMMING_N; + opamp1_trimmingvalue = &opamp1_trimmingvaluen; + opamp2_trimmingvalue = &opamp2_trimmingvaluen; + + /* Set bit OPAMP_CSR_OPAXCALOUT default state when trimming value */ + /* is 00000b. Used to detect the bit toggling during trimming. */ + tmp_Opa1calout_DefaultSate = RESET; + tmp_Opa2calout_DefaultSate = RESET; + + /* Enable calibration for N differential pair */ + MODIFY_REG(OPAMP->CSR, OPAMP_CSR_OPAXCAL_L_ALL, + OPAMP_CSR_OPAXCAL_H_ALL); + } + else /* (trimming_diff_pair_iteration_count == 1) */ + { + /* Calibration of transistors differential pair low (PMOS) */ + trimming_diff_pair = OPAMP_FACTORYTRIMMING_P; + opamp1_trimmingvalue = &opamp1_trimmingvaluep; + opamp2_trimmingvalue = &opamp2_trimmingvaluep; + + /* Set bit OPAMP_CSR_OPAXCALOUT default state when trimming value */ + /* is 00000b. Used to detect the bit toggling during trimming. */ + tmp_Opa1calout_DefaultSate = OPAMP_CSR_OPAXCALOUT(hopamp1); + tmp_Opa2calout_DefaultSate = OPAMP_CSR_OPAXCALOUT(hopamp2); + + /* Enable calibration for P differential pair */ + MODIFY_REG(OPAMP->CSR, OPAMP_CSR_OPAXCAL_H_ALL, + OPAMP_CSR_OPAXCAL_L_ALL); + } + + + /* Perform calibration parameter search by dichotomy sweep */ + /* - Delta initial value 16: for 5 dichotomy steps: 16 for the */ + /* initial range, then successive delta sweeps (8, 4, 2, 1). */ + /* can extend the search range to +/- 15 units. */ + /* - Trimming initial value 15: search range will go from 0 to 30 */ + /* (Trimming value 31 is forbidden). */ + /* Note: After dichotomy sweep, the trimming result is determined. */ + /* However, the final trimming step is deduced from previous */ + /* trimming steps tested but is not effectively tested. */ + /* An additional test step (using variable "final_step_check") */ + /* allow to Test the final trimming step. */ + *opamp1_trimmingvalue = 15; + *opamp2_trimmingvalue = 15; + delta = 16; + + while ((delta != 0) || (final_step_check == 1)) + { + /* Set candidate trimming */ + MODIFY_REG(*tmp_opamp1_reg_trimming, OPAMP_OFFSET_TRIM_SET(hopamp1, trimming_diff_pair, OPAMP_TRIM_VALUE_MASK) , + OPAMP_OFFSET_TRIM_SET(hopamp1, trimming_diff_pair, *opamp1_trimmingvalue) | tmp_opamp1_otr_otuser); + + MODIFY_REG(*tmp_opamp2_reg_trimming, OPAMP_OFFSET_TRIM_SET(hopamp2, trimming_diff_pair, OPAMP_TRIM_VALUE_MASK) , + OPAMP_OFFSET_TRIM_SET(hopamp2, trimming_diff_pair, *opamp2_trimmingvalue) | tmp_opamp2_otr_otuser); + + + /* Offset trimming time: during calibration, minimum time needed */ + /* between two steps to have 1 mV accuracy. */ + HAL_Delay(OPAMP_TRIMMING_DELAY); + + /* Set flag for additional check of last trimming step equal to */ + /* dichotomy step before its division by 2 (equivalent to previous */ + /* value of dichotomy step). */ + final_step_check = delta; + + /* Divide range by 2 to continue dichotomy sweep */ + delta >>= 1; + + /* Set trimming values for next iteration in function of trimming */ + /* result toggle (versus initial state). */ + /* Trimming values update with dichotomy delta of previous */ + /* iteration. */ + /* Note: on the last trimming loop, delta is equal to 0 and */ + /* therefore has no effect. */ + if (READ_BIT(OPAMP->CSR, OPAMP_CSR_OPAXCALOUT(hopamp1)) != tmp_Opa1calout_DefaultSate) + { + /* If calibration output is has toggled, try lower trimming */ + *opamp1_trimmingvalue -= delta; + } + else + { + /* If calibration output is has not toggled, try higher trimming */ + *opamp1_trimmingvalue += delta; + } + + if (READ_BIT(OPAMP->CSR, OPAMP_CSR_OPAXCALOUT(hopamp2)) != tmp_Opa2calout_DefaultSate) + { + /* If calibration output is has toggled, try lower trimming */ + *opamp2_trimmingvalue -= delta; + } + else + { + /* If calibration output is has not toggled, try higher trimming */ + *opamp2_trimmingvalue += delta; + } + } + + /* Check trimming result of the selected step and perform final fine */ + /* trimming. */ + /* - If calibration output is has toggled: the current step is */ + /* already optimized. */ + /* - If calibration output is has not toggled: the current step can */ + /* be optimized by incrementing it of one step. */ + if (READ_BIT(OPAMP->CSR, OPAMP_CSR_OPAXCALOUT(hopamp1)) == tmp_Opa1calout_DefaultSate) + { + *opamp1_trimmingvalue += 1; + + /* Set final fine trimming */ + MODIFY_REG(*tmp_opamp1_reg_trimming, OPAMP_OFFSET_TRIM_SET(hopamp1, trimming_diff_pair, OPAMP_TRIM_VALUE_MASK) , + OPAMP_OFFSET_TRIM_SET(hopamp1, trimming_diff_pair, *opamp1_trimmingvalue) | tmp_opamp1_otr_otuser); + } + if (READ_BIT(OPAMP->CSR, OPAMP_CSR_OPAXCALOUT(hopamp2)) == tmp_Opa2calout_DefaultSate) + { + *opamp2_trimmingvalue += 1; + + /* Set final fine trimming */ + MODIFY_REG(*tmp_opamp2_reg_trimming, OPAMP_OFFSET_TRIM_SET(hopamp2, trimming_diff_pair, OPAMP_TRIM_VALUE_MASK) , + OPAMP_OFFSET_TRIM_SET(hopamp2, trimming_diff_pair, *opamp2_trimmingvalue) | tmp_opamp2_otr_otuser); + + } + + } + + + /* Disable calibration for P and N differential pairs */ + /* Disable the selected opamp */ + CLEAR_BIT (OPAMP->CSR, (OPAMP_CSR_OPAXCAL_H_ALL | + OPAMP_CSR_OPAXCAL_L_ALL | + OPAMP_CSR_OPAXPD_ALL )); + + /* Backup of switches configuration to restore it at the end of the */ + /* calibration. */ + SET_BIT(OPAMP->CSR, tmp_OpaxSwitchesContextBackup); + + /* Self calibration is successful */ + /* Store calibration (user trimming) results in init structure. */ + + /* Set user trimming mode */ + hopamp1->Init.UserTrimming = OPAMP_TRIMMING_USER; + hopamp2->Init.UserTrimming = OPAMP_TRIMMING_USER; + + /* Affect calibration parameters depending on mode normal/low power */ + if (hopamp1->Init.PowerMode != OPAMP_POWERMODE_LOWPOWER) + { + /* Write calibration result N */ + hopamp1->Init.TrimmingValueN = opamp1_trimmingvaluen; + /* Write calibration result P */ + hopamp1->Init.TrimmingValueP = opamp1_trimmingvaluep; + } + else + { + /* Write calibration result N */ + hopamp1->Init.TrimmingValueNLowPower = opamp1_trimmingvaluen; + /* Write calibration result P */ + hopamp1->Init.TrimmingValuePLowPower = opamp1_trimmingvaluep; + } + + if (hopamp2->Init.PowerMode != OPAMP_POWERMODE_LOWPOWER) + { + /* Write calibration result N */ + hopamp2->Init.TrimmingValueN = opamp2_trimmingvaluen; + /* Write calibration result P */ + hopamp2->Init.TrimmingValueP = opamp2_trimmingvaluep; + } + else + { + /* Write calibration result N */ + hopamp2->Init.TrimmingValueNLowPower = opamp2_trimmingvaluen; + /* Write calibration result P */ + hopamp2->Init.TrimmingValuePLowPower = opamp2_trimmingvaluep; + } + + /* Update OPAMP state */ + hopamp1->State = HAL_OPAMP_STATE_READY; + hopamp2->State = HAL_OPAMP_STATE_READY; + + } + else + { + /* OPAMP can not be calibrated from this mode */ + status = HAL_ERROR; + } + } + + return status; +} + +#endif /* STM32L151xD || STM32L152xD || STM32L162xD */ + +/** + * @} + */ + +/** @defgroup OPAMPEx_Exported_Functions_Group2 Extended Peripheral Control functions + * @brief Extended peripheral control functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] + (+) OPAMP unlock. + +@endverbatim + * @{ + */ + +/** + * @brief Unlock the selected opamp configuration. + * This function must be called only when OPAMP is in state "locked". + * @param hopamp: OPAMP handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_OPAMPEx_Unlock(OPAMP_HandleTypeDef* hopamp) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the OPAMP handle allocation */ + /* Check if OPAMP locked */ + if((hopamp == NULL) || (hopamp->State == HAL_OPAMP_STATE_RESET) + || (hopamp->State == HAL_OPAMP_STATE_READY) + || (hopamp->State == HAL_OPAMP_STATE_CALIBBUSY) + || (hopamp->State == HAL_OPAMP_STATE_BUSY)) + + { + status = HAL_ERROR; + } + else + { + /* Check the parameter */ + assert_param(IS_OPAMP_ALL_INSTANCE(hopamp->Instance)); + + /* OPAMP state changed to locked */ + hopamp->State = HAL_OPAMP_STATE_BUSY; + } + return status; +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX || STM32L162xC || STM32L152xC || STM32L151xC */ + +#endif /* HAL_OPAMP_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_pcd.c b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_pcd.c new file mode 100755 index 0000000..469bafd --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_pcd.c @@ -0,0 +1,1415 @@ +/** + ****************************************************************************** + * @file stm32l1xx_hal_pcd.c + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief PCD HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the USB Peripheral Controller: + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral Control functions + * + Peripheral State functions + * + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The PCD HAL driver can be used as follows: + + (#) Declare a PCD_HandleTypeDef handle structure, for example: + PCD_HandleTypeDef hpcd; + + (#) Fill parameters of Init structure in HCD handle + + (#) Call HAL_PCD_Init() API to initialize the HCD peripheral (Core, Device core, ...) + + (#) Initialize the PCD low level resources through the HAL_PCD_MspInit() API: + (##) Enable the PCD/USB Low Level interface clock using + (+++) __HAL_RCC_USB_CLK_ENABLE); + + (##) Initialize the related GPIO clocks + (##) Configure PCD pin-out + (##) Configure PCD NVIC interrupt + + (#)Associate the Upper USB device stack to the HAL PCD Driver: + (##) hpcd.pData = pdev; + + (#)Enable HCD transmission and reception: + (##) HAL_PCD_Start(); + + @endverbatim + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_hal.h" + +/** @addtogroup STM32L1xx_HAL_Driver + * @{ + */ + +/** @defgroup PCD PCD + * @brief PCD HAL module driver + * @{ + */ + +#ifdef HAL_PCD_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ + +/** @defgroup PCD_Private_Define PCD Private Define + * @{ + */ +#define BTABLE_ADDRESS (0x000) +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup PCD_Private_Functions PCD Private Functions + * @{ + */ +static HAL_StatusTypeDef PCD_EP_ISR_Handler(PCD_HandleTypeDef *hpcd); +static void PCD_WritePMA(USB_TypeDef *USBx, uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes); +static void PCD_ReadPMA(USB_TypeDef *USBx, uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes); + +/** + * @} + */ + +/* Exported functions ---------------------------------------------------------*/ + +/** @defgroup PCD_Exported_Functions PCD Exported Functions + * @{ + */ + +/** @defgroup PCD_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] This section provides functions allowing to: + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the PCD according to the specified + * parameters in the PCD_InitTypeDef and create the associated handle. + * @param hpcd: PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_Init(PCD_HandleTypeDef *hpcd) +{ + uint32_t i = 0; + + uint32_t wInterrupt_Mask = 0; + + /* Check the PCD handle allocation */ + if(hpcd == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_PCD_ALL_INSTANCE(hpcd->Instance)); + + if(hpcd->State == HAL_PCD_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hpcd->Lock = HAL_UNLOCKED; + + /* Init the low level hardware : GPIO, CLOCK, NVIC... */ + HAL_PCD_MspInit(hpcd); + } + + hpcd->State = HAL_PCD_STATE_BUSY; + + /* Init endpoints structures */ + for (i = 0; i < hpcd->Init.dev_endpoints ; i++) + { + /* Init ep structure */ + hpcd->IN_ep[i].is_in = 1; + hpcd->IN_ep[i].num = i; + /* Control until ep is actvated */ + hpcd->IN_ep[i].type = PCD_EP_TYPE_CTRL; + hpcd->IN_ep[i].maxpacket = 0; + hpcd->IN_ep[i].xfer_buff = 0; + hpcd->IN_ep[i].xfer_len = 0; + } + + for (i = 0; i < hpcd->Init.dev_endpoints ; i++) + { + hpcd->OUT_ep[i].is_in = 0; + hpcd->OUT_ep[i].num = i; + /* Control until ep is activated */ + hpcd->OUT_ep[i].type = PCD_EP_TYPE_CTRL; + hpcd->OUT_ep[i].maxpacket = 0; + hpcd->OUT_ep[i].xfer_buff = 0; + hpcd->OUT_ep[i].xfer_len = 0; + } + + /* Init Device */ + /*CNTR_FRES = 1*/ + hpcd->Instance->CNTR = USB_CNTR_FRES; + + /*CNTR_FRES = 0*/ + hpcd->Instance->CNTR = 0; + + /*Clear pending interrupts*/ + hpcd->Instance->ISTR = 0; + + /*Set Btable Adress*/ + hpcd->Instance->BTABLE = BTABLE_ADDRESS; + + /*set wInterrupt_Mask global variable*/ + wInterrupt_Mask = USB_CNTR_CTRM | USB_CNTR_WKUPM | USB_CNTR_SUSPM | USB_CNTR_ERRM \ + | USB_CNTR_ESOFM | USB_CNTR_RESETM; + + /*Set interrupt mask*/ + hpcd->Instance->CNTR = wInterrupt_Mask; + + hpcd->USB_Address = 0; + hpcd->State= HAL_PCD_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the PCD peripheral + * @param hpcd: PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_DeInit(PCD_HandleTypeDef *hpcd) +{ + /* Check the PCD handle allocation */ + if(hpcd == NULL) + { + return HAL_ERROR; + } + + hpcd->State = HAL_PCD_STATE_BUSY; + + /* Stop Device */ + HAL_PCD_Stop(hpcd); + + /* DeInit the low level hardware */ + HAL_PCD_MspDeInit(hpcd); + + hpcd->State = HAL_PCD_STATE_RESET; + + return HAL_OK; +} + +/** + * @brief Initializes the PCD MSP. + * @param hpcd: PCD handle + * @retval None + */ +__weak void HAL_PCD_MspInit(PCD_HandleTypeDef *hpcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes PCD MSP. + * @param hpcd: PCD handle + * @retval None + */ +__weak void HAL_PCD_MspDeInit(PCD_HandleTypeDef *hpcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_MspDeInit could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup PCD_Exported_Functions_Group2 IO operation functions + * @brief Data transfers functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to manage the PCD data + transfers. + +@endverbatim + * @{ + */ + +/** + * @brief Start the USB device. + * @param hpcd: PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_Start(PCD_HandleTypeDef *hpcd) +{ + HAL_PCDEx_SetConnectionState (hpcd, 1); + + return HAL_OK; +} + +/** + * @brief Stop the USB device. + * @param hpcd: PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_Stop(PCD_HandleTypeDef *hpcd) +{ + __HAL_LOCK(hpcd); + + /* disable all interrupts and force USB reset */ + hpcd->Instance->CNTR = USB_CNTR_FRES; + + /* clear interrupt status register */ + hpcd->Instance->ISTR = 0; + + /* switch-off device */ + hpcd->Instance->CNTR = (USB_CNTR_FRES | USB_CNTR_PDWN); + + __HAL_UNLOCK(hpcd); + return HAL_OK; +} +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup PCD_Private_Functions PCD Private Functions + * @{ + */ +/** + * @brief This function handles PCD Endpoint interrupt request. + * @param hpcd: PCD handle + * @retval HAL status + */ +static HAL_StatusTypeDef PCD_EP_ISR_Handler(PCD_HandleTypeDef *hpcd) +{ + PCD_EPTypeDef *ep; + uint16_t count=0; + uint8_t EPindex; + __IO uint16_t wIstr; + __IO uint16_t wEPVal = 0; + + /* stay in loop while pending interrupts */ + while (((wIstr = hpcd->Instance->ISTR) & USB_ISTR_CTR) != 0) + { + /* extract highest priority endpoint number */ + EPindex = (uint8_t)(wIstr & USB_ISTR_EP_ID); + + if (EPindex == 0) + { + /* Decode and service control endpoint interrupt */ + + /* DIR bit = origin of the interrupt */ + if ((wIstr & USB_ISTR_DIR) == 0) + { + /* DIR = 0 */ + + /* DIR = 0 => IN int */ + /* DIR = 0 implies that (EP_CTR_TX = 1) always */ + PCD_CLEAR_TX_EP_CTR(hpcd->Instance, PCD_ENDP0); + ep = &hpcd->IN_ep[0]; + + ep->xfer_count = PCD_GET_EP_TX_CNT(hpcd->Instance, ep->num); + ep->xfer_buff += ep->xfer_count; + + /* TX COMPLETE */ + HAL_PCD_DataInStageCallback(hpcd, 0); + + + if((hpcd->USB_Address > 0)&& ( ep->xfer_len == 0)) + { + hpcd->Instance->DADDR = (hpcd->USB_Address | USB_DADDR_EF); + hpcd->USB_Address = 0; + } + + } + else + { + /* DIR = 1 */ + + /* DIR = 1 & CTR_RX => SETUP or OUT int */ + /* DIR = 1 & (CTR_TX | CTR_RX) => 2 int pending */ + ep = &hpcd->OUT_ep[0]; + wEPVal = PCD_GET_ENDPOINT(hpcd->Instance, PCD_ENDP0); + + if ((wEPVal & USB_EP_SETUP) != 0) + { + /* Get SETUP Packet*/ + ep->xfer_count = PCD_GET_EP_RX_CNT(hpcd->Instance, ep->num); + PCD_ReadPMA(hpcd->Instance, (uint8_t*)hpcd->Setup ,ep->pmaadress , ep->xfer_count); + /* SETUP bit kept frozen while CTR_RX = 1*/ + PCD_CLEAR_RX_EP_CTR(hpcd->Instance, PCD_ENDP0); + + /* Process SETUP Packet*/ + HAL_PCD_SetupStageCallback(hpcd); + } + + else if ((wEPVal & USB_EP_CTR_RX) != 0) + { + PCD_CLEAR_RX_EP_CTR(hpcd->Instance, PCD_ENDP0); + /* Get Control Data OUT Packet*/ + ep->xfer_count = PCD_GET_EP_RX_CNT(hpcd->Instance, ep->num); + + if (ep->xfer_count != 0) + { + PCD_ReadPMA(hpcd->Instance, ep->xfer_buff, ep->pmaadress, ep->xfer_count); + ep->xfer_buff+=ep->xfer_count; + } + + /* Process Control Data OUT Packet*/ + HAL_PCD_DataOutStageCallback(hpcd, 0); + + PCD_SET_EP_RX_CNT(hpcd->Instance, PCD_ENDP0, ep->maxpacket); + PCD_SET_EP_RX_STATUS(hpcd->Instance, PCD_ENDP0, USB_EP_RX_VALID); + } + } + } + else + { + + /* Decode and service non control endpoints interrupt */ + + /* process related endpoint register */ + wEPVal = PCD_GET_ENDPOINT(hpcd->Instance, EPindex); + if ((wEPVal & USB_EP_CTR_RX) != 0) + { + /* clear int flag */ + PCD_CLEAR_RX_EP_CTR(hpcd->Instance, EPindex); + ep = &hpcd->OUT_ep[EPindex]; + + /* OUT double Buffering*/ + if (ep->doublebuffer == 0) + { + count = PCD_GET_EP_RX_CNT(hpcd->Instance, ep->num); + if (count != 0) + { + PCD_ReadPMA(hpcd->Instance, ep->xfer_buff, ep->pmaadress, count); + } + } + else + { + if (PCD_GET_ENDPOINT(hpcd->Instance, ep->num) & USB_EP_DTOG_RX) + { + /*read from endpoint BUF0Addr buffer*/ + count = PCD_GET_EP_DBUF0_CNT(hpcd->Instance, ep->num); + if (count != 0) + { + PCD_ReadPMA(hpcd->Instance, ep->xfer_buff, ep->pmaaddr0, count); + } + } + else + { + /*read from endpoint BUF1Addr buffer*/ + count = PCD_GET_EP_DBUF1_CNT(hpcd->Instance, ep->num); + if (count != 0) + { + PCD_ReadPMA(hpcd->Instance, ep->xfer_buff, ep->pmaaddr1, count); + } + } + PCD_FreeUserBuffer(hpcd->Instance, ep->num, PCD_EP_DBUF_OUT); + } + /*multi-packet on the NON control OUT endpoint*/ + ep->xfer_count+=count; + ep->xfer_buff+=count; + + if ((ep->xfer_len == 0) || (count < ep->maxpacket)) + { + /* RX COMPLETE */ + HAL_PCD_DataOutStageCallback(hpcd, ep->num); + } + else + { + HAL_PCD_EP_Receive(hpcd, ep->num, ep->xfer_buff, ep->xfer_len); + } + + } /* if((wEPVal & EP_CTR_RX) */ + + if ((wEPVal & USB_EP_CTR_TX) != 0) + { + ep = &hpcd->IN_ep[EPindex]; + + /* clear int flag */ + PCD_CLEAR_TX_EP_CTR(hpcd->Instance, EPindex); + + /* IN double Buffering*/ + if (ep->doublebuffer == 0) + { + ep->xfer_count = PCD_GET_EP_TX_CNT(hpcd->Instance, ep->num); + if (ep->xfer_count != 0) + { + PCD_WritePMA(hpcd->Instance, ep->xfer_buff, ep->pmaadress, ep->xfer_count); + } + } + else + { + if (PCD_GET_ENDPOINT(hpcd->Instance, ep->num) & USB_EP_DTOG_TX) + { + /*read from endpoint BUF0Addr buffer*/ + ep->xfer_count = PCD_GET_EP_DBUF0_CNT(hpcd->Instance, ep->num); + if (ep->xfer_count != 0) + { + PCD_WritePMA(hpcd->Instance, ep->xfer_buff, ep->pmaaddr0, ep->xfer_count); + } + } + else + { + /*read from endpoint BUF1Addr buffer*/ + ep->xfer_count = PCD_GET_EP_DBUF1_CNT(hpcd->Instance, ep->num); + if (ep->xfer_count != 0) + { + PCD_WritePMA(hpcd->Instance, ep->xfer_buff, ep->pmaaddr1, ep->xfer_count); + } + } + PCD_FreeUserBuffer(hpcd->Instance, ep->num, PCD_EP_DBUF_IN); + } + /*multi-packet on the NON control IN endpoint*/ + ep->xfer_count = PCD_GET_EP_TX_CNT(hpcd->Instance, ep->num); + ep->xfer_buff+=ep->xfer_count; + + /* Zero Length Packet? */ + if (ep->xfer_len == 0) + { + /* TX COMPLETE */ + HAL_PCD_DataInStageCallback(hpcd, ep->num); + } + else + { + HAL_PCD_EP_Transmit(hpcd, ep->num, ep->xfer_buff, ep->xfer_len); + } + } + } + } + return HAL_OK; +} + +/** + * @brief Copy a buffer from user memory area to packet memory area (PMA) + * @param USBx = pointer to USB register. + * @param pbUsrBuf: pointer to user memory area. + * @param wPMABufAddr: address into PMA. + * @param wNBytes: no. of bytes to be copied. + * @retval None + */ +static void PCD_WritePMA(USB_TypeDef *USBx, uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes) +{ + uint32_t n = (wNBytes + 1) >> 1; /* n = (wNBytes + 1) / 2 */ + uint32_t i, temp1, temp2; + uint16_t *pdwVal; + pdwVal = (uint16_t *)(wPMABufAddr * 2 + (uint32_t)USBx + 0x400); + for (i = n; i != 0; i--) + { + temp1 = (uint16_t) * pbUsrBuf; + pbUsrBuf++; + temp2 = temp1 | (uint16_t) * pbUsrBuf << 8; + *pdwVal++ = temp2; + pdwVal++; + pbUsrBuf++; + } +} + +/** + * @brief Copy a buffer from user memory area to packet memory area (PMA) + * @param USBx = pointer to USB register. + * @param pbUsrBuf = pointer to user memory area. + * @param wPMABufAddr: address into PMA. + * @param wNBytes: no. of bytes to be copied. + * @retval None + */ +static void PCD_ReadPMA(USB_TypeDef *USBx, uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes) +{ + uint32_t n = (wNBytes + 1) >> 1;/* /2*/ + uint32_t i; + uint32_t *pdwVal; + pdwVal = (uint32_t *)(wPMABufAddr * 2 + (uint32_t)USBx + 0x400); + for (i = n; i != 0; i--) + { + *(uint16_t*)pbUsrBuf++ = *pdwVal++; + pbUsrBuf++; + } +} + +/** + * @} + */ + +/** @addtogroup PCD_Exported_Functions + * @{ + */ + +/** @defgroup PCD_Exported_Functions_Group2 IO operation functions + * @{ + */ + +/** + * @brief This function handles PCD interrupt request. + * @param hpcd: PCD handle + * @retval HAL status + */ +void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd) +{ + uint32_t wInterrupt_Mask = 0; + + if (__HAL_PCD_GET_FLAG (hpcd, USB_ISTR_CTR)) + { + /* servicing of the endpoint correct transfer interrupt */ + /* clear of the CTR flag into the sub */ + PCD_EP_ISR_Handler(hpcd); + } + + if (__HAL_PCD_GET_FLAG (hpcd, USB_ISTR_RESET)) + { + __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_RESET); + HAL_PCD_ResetCallback(hpcd); + HAL_PCD_SetAddress(hpcd, 0); + } + + if (__HAL_PCD_GET_FLAG (hpcd, USB_ISTR_PMAOVR)) + { + __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_PMAOVR); + } + if (__HAL_PCD_GET_FLAG (hpcd, USB_ISTR_ERR)) + { + __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_ERR); + } + + if (__HAL_PCD_GET_FLAG (hpcd, USB_ISTR_WKUP)) + { + hpcd->Instance->CNTR &= ~(USB_CNTR_LPMODE); + + /*set wInterrupt_Mask global variable*/ + wInterrupt_Mask = USB_CNTR_CTRM | USB_CNTR_WKUPM | USB_CNTR_SUSPM | USB_CNTR_ERRM \ + | USB_CNTR_ESOFM | USB_CNTR_RESETM; + + /*Set interrupt mask*/ + hpcd->Instance->CNTR = wInterrupt_Mask; + + HAL_PCD_ResumeCallback(hpcd); + + __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_WKUP); + } + + if (__HAL_PCD_GET_FLAG (hpcd, USB_ISTR_SUSP)) + { + /* clear of the ISTR bit must be done after setting of CNTR_FSUSP */ + __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_SUSP); + + /* Force low-power mode in the macrocell */ + hpcd->Instance->CNTR |= USB_CNTR_FSUSP; + hpcd->Instance->CNTR |= USB_CNTR_LPMODE; + if (__HAL_PCD_GET_FLAG (hpcd, USB_ISTR_WKUP) == 0) + { + HAL_PCD_SuspendCallback(hpcd); + } + } + + if (__HAL_PCD_GET_FLAG (hpcd, USB_ISTR_SOF)) + { + __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_SOF); + HAL_PCD_SOFCallback(hpcd); + } + + if (__HAL_PCD_GET_FLAG (hpcd, USB_ISTR_ESOF)) + { + /* clear ESOF flag in ISTR */ + __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_ESOF); + } +} + +/** + * @brief Data out stage callbacks + * @param hpcd: PCD handle + * @param epnum: endpoint number + * @retval None + */ + __weak void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + UNUSED(epnum); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_DataOutStageCallback could be implemented in the user file + */ +} + +/** + * @brief Data IN stage callbacks + * @param hpcd: PCD handle + * @param epnum: endpoint number + * @retval None + */ + __weak void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + UNUSED(epnum); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_DataInStageCallback could be implemented in the user file + */ +} +/** + * @brief Setup stage callback + * @param hpcd: PCD handle + * @retval None + */ + __weak void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_SetupStageCallback could be implemented in the user file + */ +} + +/** + * @brief USB Start Of Frame callbacks + * @param hpcd: PCD handle + * @retval None + */ + __weak void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_SOFCallback could be implemented in the user file + */ +} + +/** + * @brief USB Reset callbacks + * @param hpcd: PCD handle + * @retval None + */ + __weak void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_ResetCallback could be implemented in the user file + */ +} + + +/** + * @brief Suspend event callbacks + * @param hpcd: PCD handle + * @retval None + */ + __weak void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_SuspendCallback could be implemented in the user file + */ +} + +/** + * @brief Resume event callbacks + * @param hpcd: PCD handle + * @retval None + */ + __weak void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_ResumeCallback could be implemented in the user file + */ +} + +/** + * @brief Incomplete ISO OUT callbacks + * @param hpcd: PCD handle + * @param epnum: endpoint number + * @retval None + */ + __weak void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + UNUSED(epnum); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_ISOOUTIncompleteCallback could be implemented in the user file + */ +} + +/** + * @brief Incomplete ISO IN callbacks + * @param hpcd: PCD handle + * @param epnum: endpoint number + * @retval None + */ + __weak void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + UNUSED(epnum); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_ISOINIncompleteCallback could be implemented in the user file + */ +} + +/** + * @brief Connection event callbacks + * @param hpcd: PCD handle + * @retval None + */ + __weak void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_ConnectCallback could be implemented in the user file + */ +} + +/** + * @brief Disconnection event callbacks + * @param hpcd: PCD handle + * @retval None + */ + __weak void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_DisconnectCallback could be implemented in the user file + */ +} +/** + * @} + */ + +/** @defgroup PCD_Exported_Functions_Group3 Peripheral Control functions + * @brief management functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the PCD data + transfers. + +@endverbatim + * @{ + */ + +/** + * @brief Connect the USB device + * @param hpcd: PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_DevConnect(PCD_HandleTypeDef *hpcd) +{ + __HAL_LOCK(hpcd); + + /* Enabling DP Pull-Down bit to Connect internal pull-up on USB DP line */ + HAL_PCDEx_SetConnectionState (hpcd, 1); + + __HAL_UNLOCK(hpcd); + return HAL_OK; +} + +/** + * @brief Disconnect the USB device + * @param hpcd: PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_DevDisconnect(PCD_HandleTypeDef *hpcd) +{ + __HAL_LOCK(hpcd); + + /* Disable DP Pull-Down bit*/ + HAL_PCDEx_SetConnectionState (hpcd, 0); + + __HAL_UNLOCK(hpcd); + return HAL_OK; +} + +/** + * @brief Set the USB Device address + * @param hpcd: PCD handle + * @param address: new device address + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_SetAddress(PCD_HandleTypeDef *hpcd, uint8_t address) +{ + __HAL_LOCK(hpcd); + + if(address == 0) + { + /* set device address and enable function */ + hpcd->Instance->DADDR = USB_DADDR_EF; + } + else /* USB Address will be applied later */ + { + hpcd->USB_Address = address; + } + + __HAL_UNLOCK(hpcd); + return HAL_OK; +} +/** + * @brief Open and configure an endpoint + * @param hpcd: PCD handle + * @param ep_addr: endpoint address + * @param ep_mps: endpoint max packet size + * @param ep_type: endpoint type + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_EP_Open(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint16_t ep_mps, uint8_t ep_type) +{ + HAL_StatusTypeDef ret = HAL_OK; + PCD_EPTypeDef *ep; + + if ((ep_addr & 0x80) == 0x80) + { + ep = &hpcd->IN_ep[ep_addr & 0x7F]; + } + else + { + ep = &hpcd->OUT_ep[ep_addr & 0x7F]; + } + ep->num = ep_addr & 0x7F; + + ep->is_in = (0x80 & ep_addr) != 0; + ep->maxpacket = ep_mps; + ep->type = ep_type; + + __HAL_LOCK(hpcd); + +/* initialize Endpoint */ + switch (ep->type) + { + case PCD_EP_TYPE_CTRL: + PCD_SET_EPTYPE(hpcd->Instance, ep->num, USB_EP_CONTROL); + break; + case PCD_EP_TYPE_BULK: + PCD_SET_EPTYPE(hpcd->Instance, ep->num, USB_EP_BULK); + break; + case PCD_EP_TYPE_INTR: + PCD_SET_EPTYPE(hpcd->Instance, ep->num, USB_EP_INTERRUPT); + break; + case PCD_EP_TYPE_ISOC: + PCD_SET_EPTYPE(hpcd->Instance, ep->num, USB_EP_ISOCHRONOUS); + break; + default: + break; + } + + PCD_SET_EP_ADDRESS(hpcd->Instance, ep->num, ep->num); + + if (ep->doublebuffer == 0) + { + if (ep->is_in) + { + /*Set the endpoint Transmit buffer address */ + PCD_SET_EP_TX_ADDRESS(hpcd->Instance, ep->num, ep->pmaadress); + PCD_CLEAR_TX_DTOG(hpcd->Instance, ep->num); + /* Configure NAK status for the Endpoint*/ + PCD_SET_EP_TX_STATUS(hpcd->Instance, ep->num, USB_EP_TX_NAK); + } + else + { + /*Set the endpoint Receive buffer address */ + PCD_SET_EP_RX_ADDRESS(hpcd->Instance, ep->num, ep->pmaadress); + /*Set the endpoint Receive buffer counter*/ + PCD_SET_EP_RX_CNT(hpcd->Instance, ep->num, ep->maxpacket); + PCD_CLEAR_RX_DTOG(hpcd->Instance, ep->num); + /* Configure VALID status for the Endpoint*/ + PCD_SET_EP_RX_STATUS(hpcd->Instance, ep->num, USB_EP_RX_VALID); + } + } + /*Double Buffer*/ + else + { + /*Set the endpoint as double buffered*/ + PCD_SET_EP_DBUF(hpcd->Instance, ep->num); + /*Set buffer address for double buffered mode*/ + PCD_SET_EP_DBUF_ADDR(hpcd->Instance, ep->num,ep->pmaaddr0, ep->pmaaddr1); + + if (ep->is_in==0) + { + /* Clear the data toggle bits for the endpoint IN/OUT*/ + PCD_CLEAR_RX_DTOG(hpcd->Instance, ep->num); + PCD_CLEAR_TX_DTOG(hpcd->Instance, ep->num); + + /* Reset value of the data toggle bits for the endpoint out*/ + PCD_TX_DTOG(hpcd->Instance, ep->num); + + PCD_SET_EP_RX_STATUS(hpcd->Instance, ep->num, USB_EP_RX_VALID); + PCD_SET_EP_TX_STATUS(hpcd->Instance, ep->num, USB_EP_TX_DIS); + } + else + { + /* Clear the data toggle bits for the endpoint IN/OUT*/ + PCD_CLEAR_RX_DTOG(hpcd->Instance, ep->num); + PCD_CLEAR_TX_DTOG(hpcd->Instance, ep->num); + PCD_RX_DTOG(hpcd->Instance, ep->num); + /* Configure DISABLE status for the Endpoint*/ + PCD_SET_EP_TX_STATUS(hpcd->Instance, ep->num, USB_EP_TX_DIS); + PCD_SET_EP_RX_STATUS(hpcd->Instance, ep->num, USB_EP_RX_DIS); + } + } + + __HAL_UNLOCK(hpcd); + return ret; +} + + +/** + * @brief Deactivate an endpoint + * @param hpcd: PCD handle + * @param ep_addr: endpoint address + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_EP_Close(PCD_HandleTypeDef *hpcd, uint8_t ep_addr) +{ + PCD_EPTypeDef *ep; + + if ((ep_addr & 0x80) == 0x80) + { + ep = &hpcd->IN_ep[ep_addr & 0x7F]; + } + else + { + ep = &hpcd->OUT_ep[ep_addr & 0x7F]; + } + ep->num = ep_addr & 0x7F; + + ep->is_in = (0x80 & ep_addr) != 0; + + __HAL_LOCK(hpcd); + + if (ep->doublebuffer == 0) + { + if (ep->is_in) + { + PCD_CLEAR_TX_DTOG(hpcd->Instance, ep->num); + /* Configure DISABLE status for the Endpoint*/ + PCD_SET_EP_TX_STATUS(hpcd->Instance, ep->num, USB_EP_TX_DIS); + } + else + { + PCD_CLEAR_RX_DTOG(hpcd->Instance, ep->num); + /* Configure DISABLE status for the Endpoint*/ + PCD_SET_EP_RX_STATUS(hpcd->Instance, ep->num, USB_EP_RX_DIS); + } + } + /*Double Buffer*/ + else + { + if (ep->is_in==0) + { + /* Clear the data toggle bits for the endpoint IN/OUT*/ + PCD_CLEAR_RX_DTOG(hpcd->Instance, ep->num); + PCD_CLEAR_TX_DTOG(hpcd->Instance, ep->num); + + /* Reset value of the data toggle bits for the endpoint out*/ + PCD_TX_DTOG(hpcd->Instance, ep->num); + + PCD_SET_EP_RX_STATUS(hpcd->Instance, ep->num, USB_EP_RX_DIS); + PCD_SET_EP_TX_STATUS(hpcd->Instance, ep->num, USB_EP_TX_DIS); + } + else + { + /* Clear the data toggle bits for the endpoint IN/OUT*/ + PCD_CLEAR_RX_DTOG(hpcd->Instance, ep->num); + PCD_CLEAR_TX_DTOG(hpcd->Instance, ep->num); + PCD_RX_DTOG(hpcd->Instance, ep->num); + /* Configure DISABLE status for the Endpoint*/ + PCD_SET_EP_TX_STATUS(hpcd->Instance, ep->num, USB_EP_TX_DIS); + PCD_SET_EP_RX_STATUS(hpcd->Instance, ep->num, USB_EP_RX_DIS); + } + } + + __HAL_UNLOCK(hpcd); + return HAL_OK; +} + + +/** + * @brief Receive an amount of data + * @param hpcd: PCD handle + * @param ep_addr: endpoint address + * @param pBuf: pointer to the reception buffer + * @param len: amount of data to be received + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_EP_Receive(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len) +{ + + PCD_EPTypeDef *ep; + + ep = &hpcd->OUT_ep[ep_addr & 0x7F]; + + /*setup and start the Xfer */ + ep->xfer_buff = pBuf; + ep->xfer_len = len; + ep->xfer_count = 0; + ep->is_in = 0; + ep->num = ep_addr & 0x7F; + + __HAL_LOCK(hpcd); + + /* Multi packet transfer*/ + if (ep->xfer_len > ep->maxpacket) + { + len=ep->maxpacket; + ep->xfer_len-=len; + } + else + { + len=ep->xfer_len; + ep->xfer_len =0; + } + + /* configure and validate Rx endpoint */ + if (ep->doublebuffer == 0) + { + /*Set RX buffer count*/ + PCD_SET_EP_RX_CNT(hpcd->Instance, ep->num, len); + } + else + { + /*Set the Double buffer counter*/ + PCD_SET_EP_DBUF_CNT(hpcd->Instance, ep->num, ep->is_in, len); + } + + PCD_SET_EP_RX_STATUS(hpcd->Instance, ep->num, USB_EP_RX_VALID); + + __HAL_UNLOCK(hpcd); + + return HAL_OK; +} + +/** + * @brief Get Received Data Size + * @param hpcd: PCD handle + * @param ep_addr: endpoint address + * @retval Data Size + */ +uint16_t HAL_PCD_EP_GetRxCount(PCD_HandleTypeDef *hpcd, uint8_t ep_addr) +{ + return hpcd->OUT_ep[ep_addr & 0x7F].xfer_count; +} +/** + * @brief Send an amount of data + * @param hpcd: PCD handle + * @param ep_addr: endpoint address + * @param pBuf: pointer to the transmission buffer + * @param len: amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_EP_Transmit(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len) +{ + PCD_EPTypeDef *ep; + uint16_t pmabuffer = 0; + + ep = &hpcd->IN_ep[ep_addr & 0x7F]; + + /*setup and start the Xfer */ + ep->xfer_buff = pBuf; + ep->xfer_len = len; + ep->xfer_count = 0; + ep->is_in = 1; + ep->num = ep_addr & 0x7F; + + __HAL_LOCK(hpcd); + + /*Multi packet transfer*/ + if (ep->xfer_len > ep->maxpacket) + { + len=ep->maxpacket; + ep->xfer_len-=len; + } + else + { + len=ep->xfer_len; + ep->xfer_len =0; + } + + /* configure and validate Tx endpoint */ + if (ep->doublebuffer == 0) + { + PCD_WritePMA(hpcd->Instance, ep->xfer_buff, ep->pmaadress, len); + PCD_SET_EP_TX_CNT(hpcd->Instance, ep->num, len); + } + else + { + /*Set the Double buffer counter */ + PCD_SET_EP_DBUF_CNT(hpcd->Instance, ep->num, ep->is_in, len); + + /*Write the data to the USB endpoint*/ + if (PCD_GET_ENDPOINT(hpcd->Instance, ep->num)& USB_EP_DTOG_TX) + { + pmabuffer = ep->pmaaddr1; + } + else + { + pmabuffer = ep->pmaaddr0; + } + + PCD_WritePMA(hpcd->Instance, ep->xfer_buff, pmabuffer, len); + PCD_FreeUserBuffer(hpcd->Instance, ep->num, ep->is_in); + } + + PCD_SET_EP_TX_STATUS(hpcd->Instance, ep->num, USB_EP_TX_VALID); + + __HAL_UNLOCK(hpcd); + + return HAL_OK; +} + +/** + * @brief Set a STALL condition over an endpoint + * @param hpcd: PCD handle + * @param ep_addr: endpoint address + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_EP_SetStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr) +{ + PCD_EPTypeDef *ep; + + __HAL_LOCK(hpcd); + + if ((0x80 & ep_addr) == 0x80) + { + ep = &hpcd->IN_ep[ep_addr & 0x7F]; + } + else + { + ep = &hpcd->OUT_ep[ep_addr]; + } + + ep->is_stall = 1; + ep->num = ep_addr & 0x7F; + ep->is_in = ((ep_addr & 0x80) == 0x80); + + if (ep->num == 0) + { + /* This macro sets STALL status for RX & TX*/ + PCD_SET_EP_TXRX_STATUS(hpcd->Instance, ep->num, USB_EP_RX_STALL, USB_EP_TX_STALL); + } + else + { + if (ep->is_in) + { + PCD_SET_EP_TX_STATUS(hpcd->Instance, ep->num , USB_EP_TX_STALL); + } + else + { + PCD_SET_EP_RX_STATUS(hpcd->Instance, ep->num , USB_EP_RX_STALL); + } + } + __HAL_UNLOCK(hpcd); + + return HAL_OK; +} + +/** + * @brief Clear a STALL condition over in an endpoint + * @param hpcd: PCD handle + * @param ep_addr: endpoint address + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_EP_ClrStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr) +{ + PCD_EPTypeDef *ep; + + if ((0x80 & ep_addr) == 0x80) + { + ep = &hpcd->IN_ep[ep_addr & 0x7F]; + } + else + { + ep = &hpcd->OUT_ep[ep_addr]; + } + + ep->is_stall = 0; + ep->num = ep_addr & 0x7F; + ep->is_in = ((ep_addr & 0x80) == 0x80); + + __HAL_LOCK(hpcd); + + if (ep->is_in) + { + PCD_CLEAR_TX_DTOG(hpcd->Instance, ep->num); + PCD_SET_EP_TX_STATUS(hpcd->Instance, ep->num, USB_EP_TX_VALID); + } + else + { + PCD_CLEAR_RX_DTOG(hpcd->Instance, ep->num); + PCD_SET_EP_RX_STATUS(hpcd->Instance, ep->num, USB_EP_RX_VALID); + } + __HAL_UNLOCK(hpcd); + + return HAL_OK; +} + +/** + * @brief Flush an endpoint + * @param hpcd: PCD handle + * @param ep_addr: endpoint address + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_EP_Flush(PCD_HandleTypeDef *hpcd, uint8_t ep_addr) +{ + return HAL_OK; +} + +/** + * @brief HAL_PCD_ActivateRemoteWakeup : active remote wakeup signalling + * @param hpcd: PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_ActivateRemoteWakeup(PCD_HandleTypeDef *hpcd) +{ + hpcd->Instance->CNTR |= USB_CNTR_RESUME; + return HAL_OK; +} + +/** + * @brief HAL_PCD_DeActivateRemoteWakeup : de-active remote wakeup signalling + * @param hpcd: PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_DeActivateRemoteWakeup(PCD_HandleTypeDef *hpcd) +{ + hpcd->Instance->CNTR &= ~(USB_CNTR_RESUME); + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup PCD_Exported_Functions_Group4 Peripheral State functions + * @brief Peripheral State functions + * +@verbatim + =============================================================================== + ##### Peripheral State functions ##### + =============================================================================== + [..] + This subsection permits to get in run-time the status of the peripheral + and the data flow. + +@endverbatim + * @{ + */ + + +/** + * @brief Return the PCD state + * @param hpcd : PCD handle + * @retval HAL state + */ +PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd) +{ + return hpcd->State; +} + + +/** + * @brief Software Device Connection + * @param hpcd: PCD handle + * @param state: Device state + * @retval None + */ + __weak void HAL_PCDEx_SetConnectionState(PCD_HandleTypeDef *hpcd, uint8_t state) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + UNUSED(state); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCDEx_SetConnectionState could be implenetd in the user file + */ +} + +/** + * @} + */ + +/** + * @} + */ + + +#endif /* HAL_PCD_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_pcd_ex.c b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_pcd_ex.c new file mode 100755 index 0000000..1e081d3 --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_pcd_ex.c @@ -0,0 +1,154 @@ +/** + ****************************************************************************** + * @file stm32l1xx_hal_pcd_ex.c + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief Extended PCD HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the USB Peripheral Controller: + * + Configururation of the PMA for EP + * + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_hal.h" + +/** @addtogroup STM32L1xx_HAL_Driver + * @{ + */ + +/** @defgroup PCDEx PCDEx + * @brief PCDEx HAL module driver + * @{ + */ + +#ifdef HAL_PCD_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + + +/** @defgroup PCDEx_Exported_Functions PCDEx Exported Functions + * @{ + */ + +/** @defgroup PCDEx_Exported_Functions_Group2 Extended Peripheral Control functions + * @brief Extended Peripheral Control functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Configure PMA for the EndPoint + +@endverbatim + * @{ + */ + +/** + * @brief Configure PMA for EP + * @param hpcd : Device instance + * @param ep_addr: endpoint address + * @param ep_kind: endpoint Kind + * USB_SNG_BUF: Single Buffer used + * USB_DBL_BUF: Double Buffer used + * @param pmaadress: EP address in The PMA: In case of single buffer endpoint + * this parameter is 16-bit value providing the address + * in PMA allocated to endpoint. + * In case of double buffer endpoint this parameter + * is a 32-bit value providing the endpoint buffer 0 address + * in the LSB part of 32-bit value and endpoint buffer 1 address + * in the MSB part of 32-bit value. + * @retval : status + */ + +HAL_StatusTypeDef HAL_PCDEx_PMAConfig(PCD_HandleTypeDef *hpcd, + uint16_t ep_addr, + uint16_t ep_kind, + uint32_t pmaadress) + +{ + PCD_EPTypeDef *ep; + + /* initialize ep structure*/ + if ((0x80 & ep_addr) == 0x80) + { + ep = &hpcd->IN_ep[ep_addr & 0x7F]; + } + else + { + ep = &hpcd->OUT_ep[ep_addr]; + } + + /* Here we check if the endpoint is single or double Buffer*/ + if (ep_kind == PCD_SNG_BUF) + { + /*Single Buffer*/ + ep->doublebuffer = 0; + /*Configure te PMA*/ + ep->pmaadress = (uint16_t)pmaadress; + } + else /*USB_DBL_BUF*/ + { + /*Double Buffer Endpoint*/ + ep->doublebuffer = 1; + /*Configure the PMA*/ + ep->pmaaddr0 = pmaadress & 0xFFFF; + ep->pmaaddr1 = (pmaadress & 0xFFFF0000U) >> 16; + } + + return HAL_OK; +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_PCD_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_pwr.c b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_pwr.c new file mode 100755 index 0000000..0de18fb --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_pwr.c @@ -0,0 +1,668 @@ +/** + ****************************************************************************** + * @file stm32l1xx_hal_pwr.c + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief PWR HAL module driver. + * + * This file provides firmware functions to manage the following + * functionalities of the Power Controller (PWR) peripheral: + * + Initialization/de-initialization functions + * + Peripheral Control functions + * + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_hal.h" + +/** @addtogroup STM32L1xx_HAL_Driver + * @{ + */ + +/** @defgroup PWR PWR + * @brief PWR HAL module driver + * @{ + */ + +#ifdef HAL_PWR_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +#define PVD_MODE_IT ((uint32_t)0x00010000) +#define PVD_MODE_EVT ((uint32_t)0x00020000) +#define PVD_RISING_EDGE ((uint32_t)0x00000001) +#define PVD_FALLING_EDGE ((uint32_t)0x00000002) + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup PWR_Exported_Functions PWR Exported Functions + * @{ + */ + +/** @defgroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and de-initialization functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] + After reset, the backup domain (RTC registers, RTC backup data + registers) is protected against possible unwanted + write accesses. + To enable access to the RTC Domain and RTC registers, proceed as follows: + (+) Enable the Power Controller (PWR) APB1 interface clock using the + __HAL_RCC_PWR_CLK_ENABLE() macro. + (+) Enable access to RTC domain using the HAL_PWR_EnableBkUpAccess() function. + +@endverbatim + * @{ + */ + +/** + * @brief Deinitializes the PWR peripheral registers to their default reset values. + * @note Before calling this function, the VOS[1:0] bits should be configured + * to "10" and the system frequency has to be configured accordingly. + * To configure the VOS[1:0] bits, use the PWR_VoltageScalingConfig() + * function. + * @note ULP and FWU bits are not reset by this function. + * @retval None + */ +void HAL_PWR_DeInit(void) +{ + __HAL_RCC_PWR_FORCE_RESET(); + __HAL_RCC_PWR_RELEASE_RESET(); +} + +/** + * @brief Enables access to the backup domain (RTC registers, RTC + * backup data registers ). + * @note If the HSE divided by 2, 4, 8 or 16 is used as the RTC clock, the + * Backup Domain Access should be kept enabled. + * @retval None + */ +void HAL_PWR_EnableBkUpAccess(void) +{ + /* Enable access to RTC and backup registers */ + *(__IO uint32_t *) CR_DBP_BB = (uint32_t)ENABLE; +} + +/** + * @brief Disables access to the backup domain (RTC registers, RTC + * backup data registers). + * @note If the HSE divided by 2, 4, 8 or 16 is used as the RTC clock, the + * Backup Domain Access should be kept enabled. + * @retval None + */ +void HAL_PWR_DisableBkUpAccess(void) +{ + /* Disable access to RTC and backup registers */ + *(__IO uint32_t *) CR_DBP_BB = (uint32_t)DISABLE; +} + +/** + * @} + */ + +/** @defgroup PWR_Exported_Functions_Group2 Peripheral Control functions + * @brief Low Power modes configuration functions + * +@verbatim + + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + + *** PVD configuration *** + ========================= + [..] + (+) The PVD is used to monitor the VDD power supply by comparing it to a + threshold selected by the PVD Level (PLS[2:0] bits in the PWR_CR). + (+) The PVD can use an external input analog voltage (PVD_IN) which is compared + internally to VREFINT. The PVD_IN (PB7) has to be configured in Analog mode + when PWR_PVDLevel_7 is selected (PLS[2:0] = 111). + + (+) A PVDO flag is available to indicate if VDD/VDDA is higher or lower + than the PVD threshold. This event is internally connected to the EXTI + line16 and can generate an interrupt if enabled. This is done through + __HAL_PWR_PVD_EXTI_ENABLE_IT() macro. + (+) The PVD is stopped in Standby mode. + + *** WakeUp pin configuration *** + ================================ + [..] + (+) WakeUp pin is used to wake up the system from Standby mode. This pin is + forced in input pull-down configuration and is active on rising edges. + (+) There are two or three WakeUp pins: + WakeUp Pin 1 on PA.00. + WakeUp Pin 2 on PC.13. + WakeUp Pin 3 on PE.06. : Only on product with GPIOE available + + [..] + *** Main and Backup Regulators configuration *** + ================================================ + + (+) The main internal regulator can be configured to have a tradeoff between + performance and power consumption when the device does not operate at + the maximum frequency. This is done through __HAL_PWR_VOLTAGESCALING_CONFIG() + macro which configure VOS bit in PWR_CR register: + (++) When this bit is set (Regulator voltage output Scale 1 mode selected) + the System frequency can go up to 32 MHz. + (++) When this bit is reset (Regulator voltage output Scale 2 mode selected) + the System frequency can go up to 16 MHz. + (++) When this bit is reset (Regulator voltage output Scale 3 mode selected) + the System frequency can go up to 4.2 MHz. + + Refer to the datasheets for more details. + + *** Low Power modes configuration *** + ===================================== + [..] + The device features 5 low-power modes: + (+) Low power run mode: regulator in low power mode, limited clock frequency, + limited number of peripherals running. + (+) Sleep mode: Cortex-M3 core stopped, peripherals kept running. + (+) Low power sleep mode: Cortex-M3 core stopped, limited clock frequency, + limited number of peripherals running, regulator in low power mode. + (+) Stop mode: All clocks are stopped, regulator running, regulator in low power mode. + (+) Standby mode: VCORE domain powered off + + *** Low power run mode *** + ========================= + [..] + To further reduce the consumption when the system is in Run mode, the regulator can be + configured in low power mode. In this mode, the system frequency should not exceed + MSI frequency range1. + In Low power run mode, all I/O pins keep the same state as in Run mode. + + (+) Entry: + (++) VCORE in range2 + (++) Decrease the system frequency tonot exceed the frequency of MSI frequency range1. + (++) The regulator is forced in low power mode using the HAL_PWREx_EnableLowPowerRunMode() + function. + (+) Exit: + (++) The regulator is forced in Main regulator mode using the HAL_PWREx_DisableLowPowerRunMode() + function. + (++) Increase the system frequency if needed. + + *** Sleep mode *** + ================== + [..] + (+) Entry: + The Sleep mode is entered by using the HAL_PWR_EnterSLEEPMode(PWR_MAINREGULATOR_ON, PWR_SLEEPENTRY_WFx) + functions with + (++) PWR_SLEEPENTRY_WFI: enter SLEEP mode with WFI instruction + (++) PWR_SLEEPENTRY_WFE: enter SLEEP mode with WFE instruction + + (+) Exit: + (++) Any peripheral interrupt acknowledged by the nested vectored interrupt + controller (NVIC) can wake up the device from Sleep mode. + + *** Low power sleep mode *** + ============================ + [..] + (+) Entry: + The Low power sleep mode is entered by using the HAL_PWR_EnterSLEEPMode(PWR_LOWPOWERREGULATOR_ON, PWR_SLEEPENTRY_WFx) + functions with + (++) PWR_SLEEPENTRY_WFI: enter SLEEP mode with WFI instruction + (++) PWR_SLEEPENTRY_WFE: enter SLEEP mode with WFE instruction + (+) The Flash memory can be switched off by using the control bits (SLEEP_PD in the FLASH_ACR register. + This reduces power consumption but increases the wake-up time. + + (+) Exit: + (++) If the WFI instruction was used to enter Low power sleep mode, any peripheral interrupt + acknowledged by the nested vectored interrupt controller (NVIC) can wake up the device + from Low power sleep mode. If the WFE instruction was used to enter Low power sleep mode, + the MCU exits Sleep mode as soon as an event occurs. + + *** Stop mode *** + ================= + [..] + The Stop mode is based on the Cortex-M3 deepsleep mode combined with peripheral + clock gating. The voltage regulator can be configured either in normal or low-power mode. + In Stop mode, all clocks in the VCORE domain are stopped, the PLL, the MSI, the HSI and + the HSE RC oscillators are disabled. Internal SRAM and register contents are preserved. + To get the lowest consumption in Stop mode, the internal Flash memory also enters low + power mode. When the Flash memory is in power-down mode, an additional startup delay is + incurred when waking up from Stop mode. + To minimize the consumption In Stop mode, VREFINT, the BOR, PVD, and temperature + sensor can be switched off before entering Stop mode. They can be switched on again by + software after exiting Stop mode using the ULP bit in the PWR_CR register. + In Stop mode, all I/O pins keep the same state as in Run mode. + + (+) Entry: + The Stop mode is entered using the HAL_PWR_EnterSTOPMode(PWR_MAINREGULATOR_ON, PWR_SLEEPENTRY_WFI ) + function with: + (++) Main regulator ON. + (++) Low Power regulator ON. + (++) PWR_SLEEPENTRY_WFI: enter SLEEP mode with WFI instruction + (++) PWR_SLEEPENTRY_WFE: enter SLEEP mode with WFE instruction + (+) Exit: + (++) By issuing an interrupt or a wakeup event, the MSI RC oscillator is selected as system clock. + + *** Standby mode *** + ==================== + [..] + The Standby mode allows to achieve the lowest power consumption. It is based on the + Cortex-M3 deepsleep mode, with the voltage regulator disabled. The VCORE domain is + consequently powered off. The PLL, the MSI, the HSI oscillator and the HSE oscillator are + also switched off. SRAM and register contents are lost except for the RTC registers, RTC + backup registers and Standby circuitry. + + To minimize the consumption In Standby mode, VREFINT, the BOR, PVD, and temperature + sensor can be switched off before entering the Standby mode. They can be switched + on again by software after exiting the Standby mode. + function. + + (+) Entry: + (++) The Standby mode is entered using the HAL_PWR_EnterSTANDBYMode() function. + (+) Exit: + (++) WKUP pin rising edge, RTC alarm (Alarm A and Alarm B), RTC wakeup, + tamper event, time-stamp event, external reset in NRST pin, IWDG reset. + + *** Auto-wakeup (AWU) from low-power mode *** + ============================================= + [..] + The MCU can be woken up from low-power mode by an RTC Alarm event, an RTC + Wakeup event, a tamper event, a time-stamp event, or a comparator event, + without depending on an external interrupt (Auto-wakeup mode). + + (+) RTC auto-wakeup (AWU) from the Stop mode + (++) To wake up from the Stop mode with an RTC alarm event, it is necessary to: + (+++) Configure the EXTI Line 17 to be sensitive to rising edges (Interrupt + or Event modes) and Enable the RTC Alarm Interrupt using the HAL_RTC_SetAlarm_IT() + function + (+++) Configure the RTC to generate the RTC alarm using the HAL_RTC_Init() + and HAL_RTC_SetTime() functions. + (++) To wake up from the Stop mode with an RTC Tamper or time stamp event, it + is necessary to: + (+++) Configure the EXTI Line 19 to be sensitive to rising edges (Interrupt or Event modes) and + Enable the RTC Tamper or time stamp Interrupt using the HAL_RTCEx_SetTamper_IT() + or HAL_RTCEx_SetTimeStamp_IT() functions. + (++) To wake up from the Stop mode with an RTC WakeUp event, it is necessary to: + (+++) Configure the EXTI Line 20 to be sensitive to rising edges (Interrupt or Event modes) and + Enable the RTC WakeUp Interrupt using the HAL_RTCEx_SetWakeUpTimer_IT() function. + (+++) Configure the RTC to generate the RTC WakeUp event using the HAL_RTCEx_SetWakeUpTimer() + function. + + (+) RTC auto-wakeup (AWU) from the Standby mode + (++) To wake up from the Standby mode with an RTC alarm event, it is necessary to: + (+++) Enable the RTC Alarm Interrupt using the HAL_RTC_SetAlarm_IT() function. + (+++) Configure the RTC to generate the RTC alarm using the HAL_RTC_Init() + and HAL_RTC_SetTime() functions. + (++) To wake up from the Standby mode with an RTC Tamper or time stamp event, it + is necessary to: + (+++) Enable the RTC Tamper or time stamp Interrupt and Configure the RTC to + detect the tamper or time stamp event using the HAL_RTCEx_SetTimeStamp_IT() + or HAL_RTCEx_SetTamper_IT()functions. + (++) To wake up from the Standby mode with an RTC WakeUp event, it is necessary to: + (+++) Enable the RTC WakeUp Interrupt and Configure the RTC to generate the RTC WakeUp event + using the HAL_RTCEx_SetWakeUpTimer_IT() and HAL_RTCEx_SetWakeUpTimer() functions. + + (+) Comparator auto-wakeup (AWU) from the Stop mode + (++) To wake up from the Stop mode with an comparator 1 or comparator 2 wakeup + event, it is necessary to: + (+++) Configure the EXTI Line 21 or EXTI Line 22 for comparator to be sensitive to to the + selected edges (falling, rising or falling and rising) (Interrupt or Event modes) using + the COMP functions. + (+++) Configure the comparator to generate the event. + + + +@endverbatim + * @{ + */ + +/** + * @brief Configures the voltage threshold detected by the Power Voltage Detector(PVD). + * @param sConfigPVD: pointer to an PWR_PVDTypeDef structure that contains the configuration + * information for the PVD. + * @note Refer to the electrical characteristics of your device datasheet for + * more details about the voltage threshold corresponding to each + * detection level. + * @retval None + */ +void HAL_PWR_ConfigPVD(PWR_PVDTypeDef *sConfigPVD) +{ + /* Check the parameters */ + assert_param(IS_PWR_PVD_LEVEL(sConfigPVD->PVDLevel)); + assert_param(IS_PWR_PVD_MODE(sConfigPVD->Mode)); + + /* Set PLS[7:5] bits according to PVDLevel value */ + MODIFY_REG(PWR->CR, PWR_CR_PLS, sConfigPVD->PVDLevel); + + /* Clear any previous config. Keep it clear if no event or IT mode is selected */ + __HAL_PWR_PVD_EXTI_DISABLE_EVENT(); + __HAL_PWR_PVD_EXTI_DISABLE_IT(); + __HAL_PWR_PVD_EXTI_DISABLE_RISING_FALLING_EDGE(); + + /* Configure interrupt mode */ + if((sConfigPVD->Mode & PVD_MODE_IT) == PVD_MODE_IT) + { + __HAL_PWR_PVD_EXTI_ENABLE_IT(); + } + + /* Configure event mode */ + if((sConfigPVD->Mode & PVD_MODE_EVT) == PVD_MODE_EVT) + { + __HAL_PWR_PVD_EXTI_ENABLE_EVENT(); + } + + /* Configure the edge */ + if((sConfigPVD->Mode & PVD_RISING_EDGE) == PVD_RISING_EDGE) + { + __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE(); + } + + if((sConfigPVD->Mode & PVD_FALLING_EDGE) == PVD_FALLING_EDGE) + { + __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE(); + } +} + +/** + * @brief Enables the Power Voltage Detector(PVD). + * @retval None + */ +void HAL_PWR_EnablePVD(void) +{ + /* Enable the power voltage detector */ + *(__IO uint32_t *) CR_PVDE_BB = (uint32_t)ENABLE; +} + +/** + * @brief Disables the Power Voltage Detector(PVD). + * @retval None + */ +void HAL_PWR_DisablePVD(void) +{ + /* Disable the power voltage detector */ + *(__IO uint32_t *) CR_PVDE_BB = (uint32_t)DISABLE; +} + +/** + * @brief Enables the WakeUp PINx functionality. + * @param WakeUpPinx: Specifies the Power Wake-Up pin to enable. + * This parameter can be one of the following values: + * @arg PWR_WAKEUP_PIN1 + * @arg PWR_WAKEUP_PIN2 + * @arg PWR_WAKEUP_PIN3: Only on product with GPIOE available + * @retval None + */ +void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinx) +{ + /* Check the parameter */ + assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinx)); + /* Enable the EWUPx pin */ + *(__IO uint32_t *) CSR_EWUP_BB(WakeUpPinx) = (uint32_t)ENABLE; +} + +/** + * @brief Disables the WakeUp PINx functionality. + * @param WakeUpPinx: Specifies the Power Wake-Up pin to disable. + * This parameter can be one of the following values: + * @arg PWR_WAKEUP_PIN1 + * @arg PWR_WAKEUP_PIN2 + * @arg PWR_WAKEUP_PIN3: Only on product with GPIOE available + * @retval None + */ +void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx) +{ + /* Check the parameter */ + assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinx)); + /* Disable the EWUPx pin */ + *(__IO uint32_t *) CSR_EWUP_BB(WakeUpPinx) = (uint32_t)DISABLE; +} + +/** + * @brief Enters Sleep mode. + * @note In Sleep mode, all I/O pins keep the same state as in Run mode. + * @param Regulator: Specifies the regulator state in SLEEP mode. + * This parameter can be one of the following values: + * @arg PWR_MAINREGULATOR_ON: SLEEP mode with regulator ON + * @arg PWR_LOWPOWERREGULATOR_ON: SLEEP mode with low power regulator ON + * @param SLEEPEntry: Specifies if SLEEP mode is entered with WFI or WFE instruction. + * When WFI entry is used, tick interrupt have to be disabled if not desired as + * the interrupt wake up source. + * This parameter can be one of the following values: + * @arg PWR_SLEEPENTRY_WFI: enter SLEEP mode with WFI instruction + * @arg PWR_SLEEPENTRY_WFE: enter SLEEP mode with WFE instruction + * @retval None + */ +void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry) +{ + /* Check the parameters */ + assert_param(IS_PWR_REGULATOR(Regulator)); + assert_param(IS_PWR_SLEEP_ENTRY(SLEEPEntry)); + + /* Select the regulator state in Sleep mode: Set PDDS and LPSDSR bit according to PWR_Regulator value */ + MODIFY_REG(PWR->CR, (PWR_CR_PDDS | PWR_CR_LPSDSR), Regulator); + + /* Clear SLEEPDEEP bit of Cortex System Control Register */ + CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); + + /* Select SLEEP mode entry -------------------------------------------------*/ + if(SLEEPEntry == PWR_SLEEPENTRY_WFI) + { + /* Request Wait For Interrupt */ + __WFI(); + } + else + { + /* Request Wait For Event */ + __SEV(); + __WFE(); + __WFE(); + } +} + +/** + * @brief Enters Stop mode. + * @note In Stop mode, all I/O pins keep the same state as in Run mode. + * @note When exiting Stop mode by using an interrupt or a wakeup event, + * MSI RC oscillator is selected as system clock. + * @note When the voltage regulator operates in low power mode, an additional + * startup delay is incurred when waking up from Stop mode. + * By keeping the internal regulator ON during Stop mode, the consumption + * is higher although the startup time is reduced. + * @param Regulator: Specifies the regulator state in Stop mode. + * This parameter can be one of the following values: + * @arg PWR_MAINREGULATOR_ON: Stop mode with regulator ON + * @arg PWR_LOWPOWERREGULATOR_ON: Stop mode with low power regulator ON + * @param STOPEntry: Specifies if Stop mode in entered with WFI or WFE instruction. + * This parameter can be one of the following values: + * @arg PWR_STOPENTRY_WFI: Enter Stop mode with WFI instruction + * @arg PWR_STOPENTRY_WFE: Enter Stop mode with WFE instruction + * @retval None + */ +void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry) +{ + /* Check the parameters */ + assert_param(IS_PWR_REGULATOR(Regulator)); + assert_param(IS_PWR_STOP_ENTRY(STOPEntry)); + + /* Select the regulator state in Stop mode: Set PDDS and LPSDSR bit according to PWR_Regulator value */ + MODIFY_REG(PWR->CR, (PWR_CR_PDDS | PWR_CR_LPSDSR), Regulator); + + /* Set SLEEPDEEP bit of Cortex System Control Register */ + SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); + + /* Select Stop mode entry --------------------------------------------------*/ + if(STOPEntry == PWR_STOPENTRY_WFI) + { + /* Request Wait For Interrupt */ + __WFI(); + } + else + { + /* Request Wait For Event */ + __SEV(); + __WFE(); + __WFE(); + } + /* Reset SLEEPDEEP bit of Cortex System Control Register */ + CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); +} + +/** + * @brief Enters Standby mode. + * @note In Standby mode, all I/O pins are high impedance except for: + * - Reset pad (still available) + * - RTC_AF1 pin (PC13) if configured for tamper, time-stamp, RTC + * Alarm out, or RTC clock calibration out. + * - WKUP pin 1 (PA0) if enabled. + * - WKUP pin 2 (PC13) if enabled. + * - WKUP pin 3 (PE6) if enabled. + * @retval None + */ +void HAL_PWR_EnterSTANDBYMode(void) +{ + /* Select Standby mode */ + SET_BIT(PWR->CR, PWR_CR_PDDS); + + /* Set SLEEPDEEP bit of Cortex System Control Register */ + SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); + + /* This option is used to ensure that store operations are completed */ +#if defined ( __CC_ARM) + __force_stores(); +#endif + /* Request Wait For Interrupt */ + __WFI(); +} + + +/** + * @brief Indicates Sleep-On-Exit when returning from Handler mode to Thread mode. + * @note Set SLEEPONEXIT bit of SCR register. When this bit is set, the processor + * re-enters SLEEP mode when an interruption handling is over. + * Setting this bit is useful when the processor is expected to run only on + * interruptions handling. + * @retval None + */ +void HAL_PWR_EnableSleepOnExit(void) +{ + /* Set SLEEPONEXIT bit of Cortex System Control Register */ + SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk)); +} + + +/** + * @brief Disables Sleep-On-Exit feature when returning from Handler mode to Thread mode. + * @note Clears SLEEPONEXIT bit of SCR register. When this bit is set, the processor + * re-enters SLEEP mode when an interruption handling is over. + * @retval None + */ +void HAL_PWR_DisableSleepOnExit(void) +{ + /* Clear SLEEPONEXIT bit of Cortex System Control Register */ + CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk)); +} + + +/** + * @brief Enables CORTEX M3 SEVONPEND bit. + * @note Sets SEVONPEND bit of SCR register. When this bit is set, this causes + * WFE to wake up when an interrupt moves from inactive to pended. + * @retval None + */ +void HAL_PWR_EnableSEVOnPend(void) +{ + /* Set SEVONPEND bit of Cortex System Control Register */ + SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk)); +} + + +/** + * @brief Disables CORTEX M3 SEVONPEND bit. + * @note Clears SEVONPEND bit of SCR register. When this bit is set, this causes + * WFE to wake up when an interrupt moves from inactive to pended. + * @retval None + */ +void HAL_PWR_DisableSEVOnPend(void) +{ + /* Clear SEVONPEND bit of Cortex System Control Register */ + CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk)); +} + + + +/** + * @brief This function handles the PWR PVD interrupt request. + * @note This API should be called under the PVD_IRQHandler(). + * @retval None + */ +void HAL_PWR_PVD_IRQHandler(void) +{ + /* Check PWR exti flag */ + if(__HAL_PWR_PVD_EXTI_GET_FLAG() != RESET) + { + /* PWR PVD interrupt user callback */ + HAL_PWR_PVDCallback(); + + /* Clear PWR Exti pending bit */ + __HAL_PWR_PVD_EXTI_CLEAR_FLAG(); + } +} + +/** + * @brief PWR PVD interrupt callback + * @retval None + */ +__weak void HAL_PWR_PVDCallback(void) +{ + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_PWR_PVDCallback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_PWR_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_pwr_ex.c b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_pwr_ex.c new file mode 100755 index 0000000..ab7989a --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_pwr_ex.c @@ -0,0 +1,179 @@ +/** + ****************************************************************************** + * @file stm32l1xx_hal_pwr_ex.c + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief Extended PWR HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Power Controller (PWR) peripheral: + * + Extended Initialization and de-initialization functions + * + Extended Peripheral Control functions + * + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_hal.h" + +/** @addtogroup STM32L1xx_HAL_Driver + * @{ + */ + +/** @defgroup PWREx PWREx + * @brief PWR HAL module driver + * @{ + */ + +#ifdef HAL_PWR_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup PWREx_Exported_Functions PWREx Exported Functions + * @{ + */ + +/** @defgroup PWREx_Exported_Functions_Group1 Peripheral Extended Features Functions + * @brief Low Power modes configuration functions + * +@verbatim + + =============================================================================== + ##### Peripheral extended features functions ##### + =============================================================================== +@endverbatim + * @{ + */ + +/** + * @brief Return Voltage Scaling Range. + * @retval VOS bit field (PWR_REGULATOR_VOLTAGE_SCALE1, PWR_REGULATOR_VOLTAGE_SCALE2 or PWR_REGULATOR_VOLTAGE_SCALE3) + */ +uint32_t HAL_PWREx_GetVoltageRange(void) +{ + return (PWR->CR & PWR_CR_VOS); +} + + +/** + * @brief Enables the Fast WakeUp from Ultra Low Power mode. + * @note This bit works in conjunction with ULP bit. + * Means, when ULP = 1 and FWU = 1 :VREFINT startup time is ignored when + * exiting from low power mode. + * @retval None + */ +void HAL_PWREx_EnableFastWakeUp(void) +{ + /* Enable the fast wake up */ + *(__IO uint32_t *) CR_FWU_BB = (uint32_t)ENABLE; +} + +/** + * @brief Disables the Fast WakeUp from Ultra Low Power mode. + * @retval None + */ +void HAL_PWREx_DisableFastWakeUp(void) +{ + /* Disable the fast wake up */ + *(__IO uint32_t *) CR_FWU_BB = (uint32_t)DISABLE; +} + +/** + * @brief Enables the Ultra Low Power mode + * @retval None + */ +void HAL_PWREx_EnableUltraLowPower(void) +{ + /* Enable the Ultra Low Power mode */ + *(__IO uint32_t *) CR_ULP_BB = (uint32_t)ENABLE; +} + +/** + * @brief Disables the Ultra Low Power mode + * @retval None + */ +void HAL_PWREx_DisableUltraLowPower(void) +{ + /* Disable the Ultra Low Power mode */ + *(__IO uint32_t *) CR_ULP_BB = (uint32_t)DISABLE; +} + +/** + * @brief Enters the Low Power Run mode. + * @note Low power run mode can only be entered when VCORE is in range 2. + * In addition, the dynamic voltage scaling must not be used when Low + * power run mode is selected. Only Stop and Sleep modes with regulator + * configured in Low power mode is allowed when Low power run mode is + * selected. + * @note In Low power run mode, all I/O pins keep the same state as in Run mode. + * @retval None + */ +void HAL_PWREx_EnableLowPowerRunMode(void) +{ + /* Enters the Low Power Run mode */ + *(__IO uint32_t *) CR_LPSDSR_BB = (uint32_t)ENABLE; + *(__IO uint32_t *) CR_LPRUN_BB = (uint32_t)ENABLE; +} + +/** + * @brief Exits the Low Power Run mode. + * @retval None + */ +HAL_StatusTypeDef HAL_PWREx_DisableLowPowerRunMode(void) +{ + /* Exits the Low Power Run mode */ + *(__IO uint32_t *) CR_LPRUN_BB = (uint32_t)DISABLE; + *(__IO uint32_t *) CR_LPSDSR_BB = (uint32_t)DISABLE; + return HAL_OK; +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_PWR_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_rcc.c b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_rcc.c new file mode 100755 index 0000000..4f7b47f --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_rcc.c @@ -0,0 +1,1344 @@ +/** + ****************************************************************************** + * @file stm32l1xx_hal_rcc.c + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief RCC HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Reset and Clock Control (RCC) peripheral: + * + Initialization and de-initialization functions + * + Peripheral Control functions + * + @verbatim + ============================================================================== + ##### RCC specific features ##### + ============================================================================== + [..] + After reset the device is running from multispeed internal oscillator clock + (MSI 2.097MHz) with Flash 0 wait state and Flash prefetch buffer is disabled, + and all peripherals are off except internal SRAM, Flash and JTAG. + (+) There is no prescaler on High speed (AHB) and Low speed (APB) buses; + all peripherals mapped on these buses are running at MSI speed. + (+) The clock for all peripherals is switched off, except the SRAM and FLASH. + (+) All GPIOs are in input floating state, except the JTAG pins which + are assigned to be used for debug purpose. + [..] Once the device started from reset, the user application has to: + (+) Configure the clock source to be used to drive the System clock + (if the application needs higher frequency/performance) + (+) Configure the System clock frequency and Flash settings + (+) Configure the AHB and APB buses prescalers + (+) Enable the clock for the peripheral(s) to be used + (+) Configure the clock source(s) for peripherals whose clocks are not + derived from the System clock (I2S, RTC, ADC, USB OTG FS/SDIO/RNG) + (*) SDIO only for STM32L1xxxD devices + + ##### RCC Limitations ##### + ============================================================================== + [..] + A delay between an RCC peripheral clock enable and the effective peripheral + enabling should be taken into account in order to manage the peripheral read/write + from/to registers. + (+) This delay depends on the peripheral mapping. + (++) AHB & APB peripherals, 1 dummy read is necessary + + [..] + Workarounds: + (#) For AHB & APB peripherals, a dummy read to the peripheral register has been + inserted in each __HAL_RCC_PPP_CLK_ENABLE() macro. + + @endverbatim + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** +*/ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_hal.h" + +/** @addtogroup STM32L1xx_HAL_Driver + * @{ + */ + +/** @defgroup RCC RCC +* @brief RCC HAL module driver + * @{ + */ + +#ifdef HAL_RCC_MODULE_ENABLED + +extern const uint8_t AHBPrescTable[16]; +extern const uint8_t APBPrescTable[8]; + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup RCC_Private_Constants RCC Private Constants + * @{ + */ +/* Bits position in in the CFGR register */ +#define RCC_CFGR_PLLMUL_BITNUMBER POSITION_VAL(RCC_CFGR_PLLMUL) +#define RCC_CFGR_PLLDIV_BITNUMBER POSITION_VAL(RCC_CFGR_PLLDIV) +#define RCC_CFGR_HPRE_BITNUMBER POSITION_VAL(RCC_CFGR_HPRE) +#define RCC_CFGR_PPRE1_BITNUMBER POSITION_VAL(RCC_CFGR_PPRE1) +#define RCC_CFGR_PPRE2_BITNUMBER POSITION_VAL(RCC_CFGR_PPRE2) +/* Bits position in in the ICSCR register */ +#define RCC_ICSCR_MSIRANGE_BITNUMBER POSITION_VAL(RCC_ICSCR_MSIRANGE) +#define RCC_ICSCR_MSITRIM_BITNUMBER POSITION_VAL(RCC_ICSCR_MSITRIM) +/** + * @} + */ +/* Private macro -------------------------------------------------------------*/ +/** @defgroup RCC_Private_Macros RCC Private Macros + * @{ + */ + +#define MCO1_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE() +#define MCO1_GPIO_PORT GPIOA +#define MCO1_PIN GPIO_PIN_8 + +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +/** @defgroup RCC_Private_Variables RCC Private Variables + * @{ + */ +extern const uint8_t PLLMulTable[]; /* Defined in CMSIS (system_stm32l0xx.c)*/ +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup RCC_Private_Functions RCC Private Functions + * @{ + */ +static HAL_StatusTypeDef RCC_SetFlashLatencyFromMSIRange(uint32_t MSIrange); +/** + * @} + */ + +/* Exported functions ---------------------------------------------------------*/ + +/** @defgroup RCC_Exported_Functions RCC Exported Functions + * @{ + */ + +/** @defgroup RCC_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * + @verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] + This section provides functions allowing to configure the internal/external oscillators + (MSI, HSE, HSI, LSE, LSI, PLL, CSS and MCO) and the System buses clocks (SYSCLK, AHB, APB1 + and APB2). + + [..] Internal/external clock and PLL configuration + (#) MSI (Multispeed internal), Seven frequency ranges are available: 65.536 kHz, + 131.072 kHz, 262.144 kHz, 524.288 kHz, 1.048 MHz, 2.097 MHz (default value) and 4.194 MHz. + + (#) HSI (high-speed internal), 16 MHz factory-trimmed RC used directly or through + the PLL as System clock source. + (#) LSI (low-speed internal), ~37 KHz low consumption RC used as IWDG and/or RTC + clock source. + + (#) HSE (high-speed external), 1 to 24 MHz crystal oscillator used directly or + through the PLL as System clock source. Can be used also as RTC clock source. + + (#) LSE (low-speed external), 32 KHz oscillator used as RTC clock source. + + (#) PLL (clocked by HSI or HSE), featuring different output clocks: + (++) The first output is used to generate the high speed system clock (up to 32 MHz) + (++) The second output is used to generate the clock for the USB OTG FS (48 MHz) + + (#) CSS (Clock security system), once enable using the macro __HAL_RCC_CSS_ENABLE() + and if a HSE clock failure occurs(HSE used directly or through PLL as System + clock source), the System clocks automatically switched to MSI and an interrupt + is generated if enabled. The interrupt is linked to the Cortex-M3 NMI + (Non-Maskable Interrupt) exception vector. + + (#) MCO1 (microcontroller clock output), used to output SYSCLK, HSI, LSI, MSI, LSE, + HSE or PLL clock (through a configurable prescaler) on PA8 pin. + + [..] System, AHB and APB buses clocks configuration + (#) Several clock sources can be used to drive the System clock (SYSCLK): MSI, HSI, + HSE and PLL. + The AHB clock (HCLK) is derived from System clock through configurable + prescaler and used to clock the CPU, memory and peripherals mapped + on AHB bus (DMA, GPIO...). APB1 (PCLK1) and APB2 (PCLK2) clocks are derived + from AHB clock through configurable prescalers and used to clock + the peripherals mapped on these buses. You can use + "@ref HAL_RCC_GetSysClockFreq()" function to retrieve the frequencies of these clocks. + + -@- All the peripheral clocks are derived from the System clock (SYSCLK) except: + (+@) RTC: RTC clock can be derived either from the LSI, LSE or HSE clock + divided by 2 to 16. You have to use @ref __HAL_RCC_RTC_CONFIG() and @ref __HAL_RCC_RTC_ENABLE() + macros to configure this clock. + (+@) LCD: LCD clock can be derived either from the LSI, LSE or HSE clock + divided by 2 to 16. You have to use @ref __HAL_RCC_LCD_CONFIG() + macros to configure this clock. + (+@) USB OTG FS: USB OTG FS require a frequency equal to 48 MHz + to work correctly. This clock is derived of the main PLL through PLL Multiplier. + + (+@) IWDG clock which is always the LSI clock. + + (#) The maximum frequency of the SYSCLK and HCLK is 32 MHz, PCLK2 32 MHz + and PCLK1 32 MHz. Depending on the device voltage range, the maximum + frequency should be adapted accordingly. + @endverbatim + * @{ + */ + +/* + Additional consideration on the HCLK based on Latency settings: + +----------------------------------------------------------------------+ + | Latency | HCLK clock frequency (MHz) | + | |------------------------------------------------------| + | | voltage range 1 | voltage range 2 | voltage range 3 | + | | 1.8 V | 1.5 V | 1.2 V | + |---------------|------------------|-----------------|-----------------| + |0WS(1CPU cycle)| 0 < HCLK <= 16 | 0 < HCLK <= 8 | 0 < HCLK <= 2 | + |---------------|------------------|-----------------|-----------------| + |1WS(2CPU cycle)| 16 < HCLK <= 32 | 8 < HCLK <= 16 | 2 < HCLK <= 4 | + +----------------------------------------------------------------------+ + + The following table gives the different clock source frequencies depending on the product + voltage range: + +------------------------------------------------------------------------------------------+ + | Product voltage | Clock frequency | + | |------------------|-----------------------------|-----------------------| + | range | MSI | HSI | HSE | PLL | + |-----------------|---------|--------|-----------------------------|-----------------------| + | Range 1 (1.8 V) | 4.2 MHz | 16 MHz | HSE 32 MHz (external clock) | 32 MHz | + | | | | or 24 MHz (crystal) | (PLLVCO max = 96 MHz) | + |-----------------|---------|--------|-----------------------------|-----------------------| + | Range 2 (1.5 V) | 4.2 MHz | 16 MHz | 16 MHz | 16 MHz | + | | | | | (PLLVCO max = 48 MHz) | + |-----------------|---------|--------|-----------------------------|-----------------------| + | Range 3 (1.2 V) | 4.2 MHz | NA | 8 MHz | 4 MHz | + | | | | | (PLLVCO max = 24 MHz) | + +------------------------------------------------------------------------------------------+ + */ + +/** + * @brief Resets the RCC clock configuration to the default reset state. + * @note The default reset state of the clock configuration is given below: + * - MSI ON and used as system clock source + * - HSI, HSE and PLL OFF + * - AHB, APB1 and APB2 prescaler set to 1. + * - CSS and MCO1 OFF + * - All interrupts disabled + * @note This function does not modify the configuration of the + * - Peripheral clocks + * - LSI, LSE and RTC clocks + * @retval None + */ +void HAL_RCC_DeInit(void) +{ + /* Set MSION bit */ + SET_BIT(RCC->CR, RCC_CR_MSION); + + /* Switch SYSCLK to MSI*/ + CLEAR_BIT(RCC->CFGR, RCC_CFGR_SW); + + /* Reset HSION, HSEON, CSSON, HSEBYP & PLLON bits */ + CLEAR_BIT(RCC->CR, RCC_CR_HSION | RCC_CR_HSEON | RCC_CR_CSSON | RCC_CR_PLLON | RCC_CR_HSEBYP); + /* Reset CFGR register */ + CLEAR_REG(RCC->CFGR); + + /* Set MSIClockRange & MSITRIM[4:0] bits to the reset value */ + MODIFY_REG(RCC->ICSCR, (RCC_ICSCR_MSIRANGE | RCC_ICSCR_MSITRIM), (((uint32_t)0 << RCC_ICSCR_MSITRIM_BITNUMBER) | RCC_ICSCR_MSIRANGE_5)); + + /* Set HSITRIM bits to the reset value */ + MODIFY_REG(RCC->ICSCR, RCC_ICSCR_HSITRIM, ((uint32_t)0x10 << POSITION_VAL(RCC_ICSCR_HSITRIM))); + + /* Disable all interrupts */ + CLEAR_REG(RCC->CIR); + + /* Update the SystemCoreClock global variable */ + SystemCoreClock = MSI_VALUE; +} + +/** + * @brief Initializes the RCC Oscillators according to the specified parameters in the + * RCC_OscInitTypeDef. + * @param RCC_OscInitStruct pointer to an RCC_OscInitTypeDef structure that + * contains the configuration information for the RCC Oscillators. + * @note The PLL is not disabled when used as system clock. + * @note Transitions LSE Bypass to LSE On and LSE On to LSE Bypass are not + * supported by this macro. User should request a transition to LSE Off + * first and then LSE On or LSE Bypass. + * @note Transition HSE Bypass to HSE On and HSE On to HSE Bypass are not + * supported by this macro. User should request a transition to HSE Off + * first and then HSE On or HSE Bypass. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct) +{ + uint32_t tickstart = 0U; + + /* Check the parameters */ + assert_param(RCC_OscInitStruct != NULL); + assert_param(IS_RCC_OSCILLATORTYPE(RCC_OscInitStruct->OscillatorType)); + + /*------------------------------- HSE Configuration ------------------------*/ + if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSE) == RCC_OSCILLATORTYPE_HSE) + { + /* Check the parameters */ + assert_param(IS_RCC_HSE(RCC_OscInitStruct->HSEState)); + + /* When the HSE is used as system clock or clock source for PLL in these cases it is not allowed to be disabled */ + if((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_HSE) + || ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_PLLCLK) && (__HAL_RCC_GET_PLL_OSCSOURCE() == RCC_PLLSOURCE_HSE))) + { + if((__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET) && (RCC_OscInitStruct->HSEState == RCC_HSE_OFF)) + { + return HAL_ERROR; + } + } + else + { + /* Set the new HSE configuration ---------------------------------------*/ + __HAL_RCC_HSE_CONFIG(RCC_OscInitStruct->HSEState); + + + /* Check the HSE State */ + if(RCC_OscInitStruct->HSEState != RCC_HSE_OFF) + { + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Wait till HSE is ready */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) == RESET) + { + if((HAL_GetTick() - tickstart ) > HSE_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + else + { + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Wait till HSE is disabled */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET) + { + if((HAL_GetTick() - tickstart ) > HSE_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + } + /*----------------------------- HSI Configuration --------------------------*/ + if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSI) == RCC_OSCILLATORTYPE_HSI) + { + /* Check the parameters */ + assert_param(IS_RCC_HSI(RCC_OscInitStruct->HSIState)); + assert_param(IS_RCC_CALIBRATION_VALUE(RCC_OscInitStruct->HSICalibrationValue)); + + /* Check if HSI is used as system clock or as PLL source when PLL is selected as system clock */ + if((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_HSI) + || ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_PLLCLK) && (__HAL_RCC_GET_PLL_OSCSOURCE() == RCC_PLLSOURCE_HSI))) + { + /* When HSI is used as system clock it will not disabled */ + if((__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET) && (RCC_OscInitStruct->HSIState != RCC_HSI_ON)) + { + return HAL_ERROR; + } + /* Otherwise, just the calibration is allowed */ + else + { + /* Adjusts the Internal High Speed oscillator (HSI) calibration value.*/ + __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue); + } + } + else + { + /* Check the HSI State */ + if(RCC_OscInitStruct->HSIState != RCC_HSI_OFF) + { + /* Enable the Internal High Speed oscillator (HSI). */ + __HAL_RCC_HSI_ENABLE(); + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Wait till HSI is ready */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) == RESET) + { + if((HAL_GetTick() - tickstart ) > HSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Adjusts the Internal High Speed oscillator (HSI) calibration value.*/ + __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue); + } + else + { + /* Disable the Internal High Speed oscillator (HSI). */ + __HAL_RCC_HSI_DISABLE(); + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Wait till HSI is disabled */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET) + { + if((HAL_GetTick() - tickstart ) > HSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + } + /*----------------------------- MSI Configuration --------------------------*/ + if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_MSI) == RCC_OSCILLATORTYPE_MSI) + { + /* When the MSI is used as system clock it will not be disabled */ + if((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_MSI) ) + { + if((__HAL_RCC_GET_FLAG(RCC_FLAG_MSIRDY) != RESET) && (RCC_OscInitStruct->MSIState == RCC_MSI_OFF)) + { + return HAL_ERROR; + } + /* Otherwise, just the calibration and MSI range change are allowed */ + else + { + /* Check MSICalibrationValue and MSIClockRange input parameters */ + assert_param(IS_RCC_MSICALIBRATION_VALUE(RCC_OscInitStruct->MSICalibrationValue)); + assert_param(IS_RCC_MSI_CLOCK_RANGE(RCC_OscInitStruct->MSIClockRange)); + + /* To correctly read data from FLASH memory, the number of wait states (LATENCY) + must be correctly programmed according to the frequency of the CPU clock + (HCLK) and the supply voltage of the device. */ + if(RCC_OscInitStruct->MSIClockRange > __HAL_RCC_GET_MSI_RANGE()) + { + /* First increase number of wait states update if necessary */ + if(RCC_SetFlashLatencyFromMSIRange(RCC_OscInitStruct->MSIClockRange) != HAL_OK) + { + return HAL_ERROR; + } + + /* Selects the Multiple Speed oscillator (MSI) clock range .*/ + __HAL_RCC_MSI_RANGE_CONFIG(RCC_OscInitStruct->MSIClockRange); + /* Adjusts the Multiple Speed oscillator (MSI) calibration value.*/ + __HAL_RCC_MSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->MSICalibrationValue); + } + else + { + /* Else, keep current flash latency while decreasing applies */ + /* Selects the Multiple Speed oscillator (MSI) clock range .*/ + __HAL_RCC_MSI_RANGE_CONFIG(RCC_OscInitStruct->MSIClockRange); + /* Adjusts the Multiple Speed oscillator (MSI) calibration value.*/ + __HAL_RCC_MSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->MSICalibrationValue); + + /* Decrease number of wait states update if necessary */ + if(RCC_SetFlashLatencyFromMSIRange(RCC_OscInitStruct->MSIClockRange) != HAL_OK) + { + return HAL_ERROR; + } + } + + /* Update the SystemCoreClock global variable */ + SystemCoreClock = (32768U * (1U << ((RCC_OscInitStruct->MSIClockRange >> RCC_ICSCR_MSIRANGE_BITNUMBER) + 1U))) + >> AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> RCC_CFGR_HPRE_BITNUMBER)]; + + /* Configure the source of time base considering new system clocks settings*/ + HAL_InitTick (TICK_INT_PRIORITY); + } + } + else + { + /* Check MSI State */ + assert_param(IS_RCC_MSI(RCC_OscInitStruct->MSIState)); + + /* Check the MSI State */ + if(RCC_OscInitStruct->MSIState != RCC_MSI_OFF) + { + /* Enable the Multi Speed oscillator (MSI). */ + __HAL_RCC_MSI_ENABLE(); + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Wait till MSI is ready */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_MSIRDY) == RESET) + { + if((HAL_GetTick() - tickstart) > MSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + /* Check MSICalibrationValue and MSIClockRange input parameters */ + assert_param(IS_RCC_MSICALIBRATION_VALUE(RCC_OscInitStruct->MSICalibrationValue)); + assert_param(IS_RCC_MSI_CLOCK_RANGE(RCC_OscInitStruct->MSIClockRange)); + + /* Selects the Multiple Speed oscillator (MSI) clock range .*/ + __HAL_RCC_MSI_RANGE_CONFIG(RCC_OscInitStruct->MSIClockRange); + /* Adjusts the Multiple Speed oscillator (MSI) calibration value.*/ + __HAL_RCC_MSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->MSICalibrationValue); + + } + else + { + /* Disable the Multi Speed oscillator (MSI). */ + __HAL_RCC_MSI_DISABLE(); + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Wait till MSI is ready */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_MSIRDY) != RESET) + { + if((HAL_GetTick() - tickstart) > MSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + } + /*------------------------------ LSI Configuration -------------------------*/ + if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSI) == RCC_OSCILLATORTYPE_LSI) + { + /* Check the parameters */ + assert_param(IS_RCC_LSI(RCC_OscInitStruct->LSIState)); + + /* Check the LSI State */ + if(RCC_OscInitStruct->LSIState != RCC_LSI_OFF) + { + /* Enable the Internal Low Speed oscillator (LSI). */ + __HAL_RCC_LSI_ENABLE(); + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Wait till LSI is ready */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) == RESET) + { + if((HAL_GetTick() - tickstart ) > LSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + else + { + /* Disable the Internal Low Speed oscillator (LSI). */ + __HAL_RCC_LSI_DISABLE(); + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Wait till LSI is disabled */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) != RESET) + { + if((HAL_GetTick() - tickstart ) > LSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + /*------------------------------ LSE Configuration -------------------------*/ + if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSE) == RCC_OSCILLATORTYPE_LSE) + { + FlagStatus pwrclkchanged = RESET; + + /* Check the parameters */ + assert_param(IS_RCC_LSE(RCC_OscInitStruct->LSEState)); + + /* Update LSE configuration in Backup Domain control register */ + /* Requires to enable write access to Backup Domain of necessary */ + if(__HAL_RCC_PWR_IS_CLK_DISABLED()) + { + __HAL_RCC_PWR_CLK_ENABLE(); + pwrclkchanged = SET; + } + + if(HAL_IS_BIT_CLR(PWR->CR, PWR_CR_DBP)) + { + /* Enable write access to Backup domain */ + SET_BIT(PWR->CR, PWR_CR_DBP); + + /* Wait for Backup domain Write protection disable */ + tickstart = HAL_GetTick(); + + while(HAL_IS_BIT_CLR(PWR->CR, PWR_CR_DBP)) + { + if((HAL_GetTick() - tickstart) > RCC_DBP_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + + /* Set the new LSE configuration -----------------------------------------*/ + __HAL_RCC_LSE_CONFIG(RCC_OscInitStruct->LSEState); + /* Check the LSE State */ + if(RCC_OscInitStruct->LSEState != RCC_LSE_OFF) + { + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Wait till LSE is ready */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET) + { + if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + else + { + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Wait till LSE is disabled */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) != RESET) + { + if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + + /* Require to disable power clock if necessary */ + if(pwrclkchanged == SET) + { + __HAL_RCC_PWR_CLK_DISABLE(); + } + } + + /*-------------------------------- PLL Configuration -----------------------*/ + /* Check the parameters */ + assert_param(IS_RCC_PLL(RCC_OscInitStruct->PLL.PLLState)); + if ((RCC_OscInitStruct->PLL.PLLState) != RCC_PLL_NONE) + { + /* Check if the PLL is used as system clock or not */ + if(__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_SYSCLKSOURCE_STATUS_PLLCLK) + { + if((RCC_OscInitStruct->PLL.PLLState) == RCC_PLL_ON) + { + /* Check the parameters */ + assert_param(IS_RCC_PLLSOURCE(RCC_OscInitStruct->PLL.PLLSource)); + assert_param(IS_RCC_PLL_MUL(RCC_OscInitStruct->PLL.PLLMUL)); + assert_param(IS_RCC_PLL_DIV(RCC_OscInitStruct->PLL.PLLDIV)); + + /* Disable the main PLL. */ + __HAL_RCC_PLL_DISABLE(); + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Wait till PLL is disabled */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET) + { + if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Configure the main PLL clock source, multiplication and division factors. */ + __HAL_RCC_PLL_CONFIG(RCC_OscInitStruct->PLL.PLLSource, + RCC_OscInitStruct->PLL.PLLMUL, + RCC_OscInitStruct->PLL.PLLDIV); + /* Enable the main PLL. */ + __HAL_RCC_PLL_ENABLE(); + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Wait till PLL is ready */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET) + { + if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + else + { + /* Disable the main PLL. */ + __HAL_RCC_PLL_DISABLE(); + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Wait till PLL is disabled */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET) + { + if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + else + { + return HAL_ERROR; + } + } + + return HAL_OK; +} + +/** + * @brief Initializes the CPU, AHB and APB buses clocks according to the specified + * parameters in the RCC_ClkInitStruct. + * @param RCC_ClkInitStruct pointer to an RCC_OscInitTypeDef structure that + * contains the configuration information for the RCC peripheral. + * @param FLatency FLASH Latency + * The value of this parameter depend on device used within the same series + * @note The SystemCoreClock CMSIS variable is used to store System Clock Frequency + * and updated by @ref HAL_RCC_GetHCLKFreq() function called within this function + * + * @note The MSI is used (enabled by hardware) as system clock source after + * start-up from Reset, wake-up from STOP and STANDBY mode, or in case + * of failure of the HSE used directly or indirectly as system clock + * (if the Clock Security System CSS is enabled). + * + * @note A switch from one clock source to another occurs only if the target + * clock source is ready (clock stable after start-up delay or PLL locked). + * If a clock source which is not yet ready is selected, the switch will + * occur when the clock source will be ready. + * You can use @ref HAL_RCC_GetClockConfig() function to know which clock is + * currently used as system clock source. + * @note Depending on the device voltage range, the software has to set correctly + * HPRE[3:0] bits to ensure that HCLK not exceed the maximum allowed frequency + * (for more details refer to section above "Initialization/de-initialization functions") + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t FLatency) +{ + uint32_t tickstart = 0U; + + /* Check the parameters */ + assert_param(RCC_ClkInitStruct != NULL); + assert_param(IS_RCC_CLOCKTYPE(RCC_ClkInitStruct->ClockType)); + assert_param(IS_FLASH_LATENCY(FLatency)); + + /* To correctly read data from FLASH memory, the number of wait states (LATENCY) + must be correctly programmed according to the frequency of the CPU clock + (HCLK) and the supply voltage of the device. */ + + /* Increasing the number of wait states because of higher CPU frequency */ + if(FLatency > (FLASH->ACR & FLASH_ACR_LATENCY)) + { + /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */ + __HAL_FLASH_SET_LATENCY(FLatency); + + /* Check that the new number of wait states is taken into account to access the Flash + memory by reading the FLASH_ACR register */ + if((FLASH->ACR & FLASH_ACR_LATENCY) != FLatency) + { + return HAL_ERROR; + } + } + + /*-------------------------- HCLK Configuration --------------------------*/ + if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_HCLK) == RCC_CLOCKTYPE_HCLK) + { + assert_param(IS_RCC_HCLK(RCC_ClkInitStruct->AHBCLKDivider)); + MODIFY_REG(RCC->CFGR, RCC_CFGR_HPRE, RCC_ClkInitStruct->AHBCLKDivider); + } + + /*------------------------- SYSCLK Configuration ---------------------------*/ + if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_SYSCLK) == RCC_CLOCKTYPE_SYSCLK) + { + assert_param(IS_RCC_SYSCLKSOURCE(RCC_ClkInitStruct->SYSCLKSource)); + + /* HSE is selected as System Clock Source */ + if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_HSE) + { + /* Check the HSE ready flag */ + if(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) == RESET) + { + return HAL_ERROR; + } + } + /* PLL is selected as System Clock Source */ + else if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_PLLCLK) + { + /* Check the PLL ready flag */ + if(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET) + { + return HAL_ERROR; + } + } + /* HSI is selected as System Clock Source */ + else if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_HSI) + { + /* Check the HSI ready flag */ + if(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) == RESET) + { + return HAL_ERROR; + } + } + /* MSI is selected as System Clock Source */ + else + { + /* Check the MSI ready flag */ + if(__HAL_RCC_GET_FLAG(RCC_FLAG_MSIRDY) == RESET) + { + return HAL_ERROR; + } + } + __HAL_RCC_SYSCLK_CONFIG(RCC_ClkInitStruct->SYSCLKSource); + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_HSE) + { + while (__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_SYSCLKSOURCE_STATUS_HSE) + { + if((HAL_GetTick() - tickstart ) > CLOCKSWITCH_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + else if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_PLLCLK) + { + while (__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_SYSCLKSOURCE_STATUS_PLLCLK) + { + if((HAL_GetTick() - tickstart ) > CLOCKSWITCH_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + else if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_HSI) + { + while (__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_SYSCLKSOURCE_STATUS_HSI) + { + if((HAL_GetTick() - tickstart ) > CLOCKSWITCH_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + else + { + while(__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_SYSCLKSOURCE_STATUS_MSI) + { + if((HAL_GetTick() - tickstart ) > CLOCKSWITCH_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + /* Decreasing the number of wait states because of lower CPU frequency */ + if(FLatency < (FLASH->ACR & FLASH_ACR_LATENCY)) + { + /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */ + __HAL_FLASH_SET_LATENCY(FLatency); + + /* Check that the new number of wait states is taken into account to access the Flash + memory by reading the FLASH_ACR register */ + if((FLASH->ACR & FLASH_ACR_LATENCY) != FLatency) + { + return HAL_ERROR; + } + } + + /*-------------------------- PCLK1 Configuration ---------------------------*/ + if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK1) == RCC_CLOCKTYPE_PCLK1) + { + assert_param(IS_RCC_PCLK(RCC_ClkInitStruct->APB1CLKDivider)); + MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE1, RCC_ClkInitStruct->APB1CLKDivider); + } + + /*-------------------------- PCLK2 Configuration ---------------------------*/ + if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK2) == RCC_CLOCKTYPE_PCLK2) + { + assert_param(IS_RCC_PCLK(RCC_ClkInitStruct->APB2CLKDivider)); + MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE2, ((RCC_ClkInitStruct->APB2CLKDivider) << 3)); + } + + /* Update the SystemCoreClock global variable */ + SystemCoreClock = HAL_RCC_GetSysClockFreq() >> AHBPrescTable[(RCC->CFGR & RCC_CFGR_HPRE)>> RCC_CFGR_HPRE_BITNUMBER]; + + /* Configure the source of time base considering new system clocks settings*/ + HAL_InitTick (TICK_INT_PRIORITY); + + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup RCC_Exported_Functions_Group2 Peripheral Control functions + * @brief RCC clocks control functions + * + @verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the RCC Clocks + frequencies. + + @endverbatim + * @{ + */ + +/** + * @brief Selects the clock source to output on MCO pin. + * @note MCO pin should be configured in alternate function mode. + * @param RCC_MCOx specifies the output direction for the clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_MCO1 Clock source to output on MCO1 pin(PA8). + * @param RCC_MCOSource specifies the clock source to output. + * This parameter can be one of the following values: + * @arg @ref RCC_MCO1SOURCE_NOCLOCK No clock selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_SYSCLK System clock selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_HSI HSI selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_HSE HSE selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_MSI MSI oscillator clock selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_PLLCLK PLL clock selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_LSI LSI clock selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_LSE LSE clock selected as MCO clock + * @param RCC_MCODiv specifies the MCO DIV. + * This parameter can be one of the following values: + * @arg @ref RCC_MCODIV_1 no division applied to MCO clock + * @arg @ref RCC_MCODIV_2 division by 2 applied to MCO clock + * @arg @ref RCC_MCODIV_4 division by 4 applied to MCO clock + * @arg @ref RCC_MCODIV_8 division by 8 applied to MCO clock + * @arg @ref RCC_MCODIV_16 division by 16 applied to MCO clock + * @retval None + */ +void HAL_RCC_MCOConfig(uint32_t RCC_MCOx, uint32_t RCC_MCOSource, uint32_t RCC_MCODiv) +{ + GPIO_InitTypeDef gpio = {0}; + + /* Check the parameters */ + assert_param(IS_RCC_MCO(RCC_MCOx)); + assert_param(IS_RCC_MCODIV(RCC_MCODiv)); + assert_param(IS_RCC_MCO1SOURCE(RCC_MCOSource)); + + /* Configure the MCO1 pin in alternate function mode */ + gpio.Mode = GPIO_MODE_AF_PP; + gpio.Speed = GPIO_SPEED_FREQ_HIGH; + gpio.Pull = GPIO_NOPULL; + gpio.Pin = MCO1_PIN; + gpio.Alternate = GPIO_AF0_MCO; + + /* MCO1 Clock Enable */ + MCO1_CLK_ENABLE(); + + HAL_GPIO_Init(MCO1_GPIO_PORT, &gpio); + + /* Configure the MCO clock source */ + __HAL_RCC_MCO1_CONFIG(RCC_MCOSource, RCC_MCODiv); +} + +/** + * @brief Enables the Clock Security System. + * @note If a failure is detected on the HSE oscillator clock, this oscillator + * is automatically disabled and an interrupt is generated to inform the + * software about the failure (Clock Security System Interrupt, CSSI), + * allowing the MCU to perform rescue operations. The CSSI is linked to + * the Cortex-M3 NMI (Non-Maskable Interrupt) exception vector. + * @retval None + */ +void HAL_RCC_EnableCSS(void) +{ + *(__IO uint32_t *) RCC_CR_CSSON_BB = (uint32_t)ENABLE; +} + +/** + * @brief Disables the Clock Security System. + * @retval None + */ +void HAL_RCC_DisableCSS(void) +{ + *(__IO uint32_t *) RCC_CR_CSSON_BB = (uint32_t)DISABLE; +} + +/** + * @brief Returns the SYSCLK frequency + * @note The system frequency computed by this function is not the real + * frequency in the chip. It is calculated based on the predefined + * constant and the selected clock source: + * @note If SYSCLK source is MSI, function returns a value based on MSI + * Value as defined by the MSI range. + * @note If SYSCLK source is HSI, function returns values based on HSI_VALUE(*) + * @note If SYSCLK source is HSE, function returns a value based on HSE_VALUE(**) + * @note If SYSCLK source is PLL, function returns a value based on HSE_VALUE(**) + * or HSI_VALUE(*) multiplied/divided by the PLL factors. + * @note (*) HSI_VALUE is a constant defined in stm32l1xx_hal_conf.h file (default value + * 16 MHz) but the real value may vary depending on the variations + * in voltage and temperature. + * @note (**) HSE_VALUE is a constant defined in stm32l1xx_hal_conf.h file (default value + * 8 MHz), user has to ensure that HSE_VALUE is same as the real + * frequency of the crystal used. Otherwise, this function may + * have wrong result. + * + * @note The result of this function could be not correct when using fractional + * value for HSE crystal. + * + * @note This function can be used by the user application to compute the + * baud-rate for the communication peripherals or configure other parameters. + * + * @note Each time SYSCLK changes, this function must be called to update the + * right SYSCLK value. Otherwise, any configuration based on this function will be incorrect. + * + * @retval SYSCLK frequency + */ +uint32_t HAL_RCC_GetSysClockFreq(void) +{ + uint32_t tmpreg = 0, pllm = 0, plld = 0, pllvco = 0, msiclkrange = 0; + uint32_t sysclockfreq = 0; + + tmpreg = RCC->CFGR; + + /* Get SYSCLK source -------------------------------------------------------*/ + switch (tmpreg & RCC_CFGR_SWS) + { + case RCC_SYSCLKSOURCE_STATUS_HSI: /* HSI used as system clock source */ + { + sysclockfreq = HSI_VALUE; + break; + } + case RCC_SYSCLKSOURCE_STATUS_HSE: /* HSE used as system clock */ + { + sysclockfreq = HSE_VALUE; + break; + } + case RCC_SYSCLKSOURCE_STATUS_PLLCLK: /* PLL used as system clock */ + { + pllm = PLLMulTable[(uint32_t)(tmpreg & RCC_CFGR_PLLMUL) >> RCC_CFGR_PLLMUL_BITNUMBER]; + plld = ((uint32_t)(tmpreg & RCC_CFGR_PLLDIV) >> RCC_CFGR_PLLDIV_BITNUMBER) + 1; + if (__HAL_RCC_GET_PLL_OSCSOURCE() != RCC_PLLSOURCE_HSI) + { + /* HSE used as PLL clock source */ + pllvco = (HSE_VALUE * pllm) / plld; + } + else + { + /* HSI used as PLL clock source */ + pllvco = (HSI_VALUE * pllm) / plld; + } + sysclockfreq = pllvco; + break; + } + case RCC_SYSCLKSOURCE_STATUS_MSI: /* MSI used as system clock source */ + default: /* MSI used as system clock */ + { + msiclkrange = (RCC->ICSCR & RCC_ICSCR_MSIRANGE ) >> RCC_ICSCR_MSIRANGE_BITNUMBER; + sysclockfreq = (32768 * (1 << (msiclkrange + 1))); + break; + } + } + return sysclockfreq; +} + +/** + * @brief Returns the HCLK frequency + * @note Each time HCLK changes, this function must be called to update the + * right HCLK value. Otherwise, any configuration based on this function will be incorrect. + * + * @note The SystemCoreClock CMSIS variable is used to store System Clock Frequency + * and updated within this function + * @retval HCLK frequency + */ +uint32_t HAL_RCC_GetHCLKFreq(void) +{ + return SystemCoreClock; +} + +/** + * @brief Returns the PCLK1 frequency + * @note Each time PCLK1 changes, this function must be called to update the + * right PCLK1 value. Otherwise, any configuration based on this function will be incorrect. + * @retval PCLK1 frequency + */ +uint32_t HAL_RCC_GetPCLK1Freq(void) +{ + /* Get HCLK source and Compute PCLK1 frequency ---------------------------*/ + return (HAL_RCC_GetHCLKFreq() >> APBPrescTable[(RCC->CFGR & RCC_CFGR_PPRE1) >> RCC_CFGR_PPRE1_BITNUMBER]); +} + +/** + * @brief Returns the PCLK2 frequency + * @note Each time PCLK2 changes, this function must be called to update the + * right PCLK2 value. Otherwise, any configuration based on this function will be incorrect. + * @retval PCLK2 frequency + */ +uint32_t HAL_RCC_GetPCLK2Freq(void) +{ + /* Get HCLK source and Compute PCLK2 frequency ---------------------------*/ + return (HAL_RCC_GetHCLKFreq()>> APBPrescTable[(RCC->CFGR & RCC_CFGR_PPRE2) >> RCC_CFGR_PPRE2_BITNUMBER]); +} + +/** + * @brief Configures the RCC_OscInitStruct according to the internal + * RCC configuration registers. + * @param RCC_OscInitStruct pointer to an RCC_OscInitTypeDef structure that + * will be configured. + * @retval None + */ +void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct) +{ + /* Check the parameters */ + assert_param(RCC_OscInitStruct != NULL); + + /* Set all possible values for the Oscillator type parameter ---------------*/ + RCC_OscInitStruct->OscillatorType = RCC_OSCILLATORTYPE_HSE | RCC_OSCILLATORTYPE_HSI \ + | RCC_OSCILLATORTYPE_LSE | RCC_OSCILLATORTYPE_LSI | RCC_OSCILLATORTYPE_MSI; + + + /* Get the HSE configuration -----------------------------------------------*/ + if((RCC->CR &RCC_CR_HSEBYP) == RCC_CR_HSEBYP) + { + RCC_OscInitStruct->HSEState = RCC_HSE_BYPASS; + } + else if((RCC->CR &RCC_CR_HSEON) == RCC_CR_HSEON) + { + RCC_OscInitStruct->HSEState = RCC_HSE_ON; + } + else + { + RCC_OscInitStruct->HSEState = RCC_HSE_OFF; + } + + /* Get the HSI configuration -----------------------------------------------*/ + if((RCC->CR &RCC_CR_HSION) == RCC_CR_HSION) + { + RCC_OscInitStruct->HSIState = RCC_HSI_ON; + } + else + { + RCC_OscInitStruct->HSIState = RCC_HSI_OFF; + } + + RCC_OscInitStruct->HSICalibrationValue = (uint32_t)((RCC->ICSCR & RCC_ICSCR_HSITRIM) >> POSITION_VAL(RCC_ICSCR_HSITRIM)); + + /* Get the MSI configuration -----------------------------------------------*/ + if((RCC->CR &RCC_CR_MSION) == RCC_CR_MSION) + { + RCC_OscInitStruct->MSIState = RCC_MSI_ON; + } + else + { + RCC_OscInitStruct->MSIState = RCC_MSI_OFF; + } + + RCC_OscInitStruct->MSICalibrationValue = (uint32_t)((RCC->ICSCR & RCC_ICSCR_MSITRIM) >> RCC_ICSCR_MSITRIM_BITNUMBER); + RCC_OscInitStruct->MSIClockRange = (uint32_t)((RCC->ICSCR & RCC_ICSCR_MSIRANGE)); + + /* Get the LSE configuration -----------------------------------------------*/ + if((RCC->CSR &RCC_CSR_LSEBYP) == RCC_CSR_LSEBYP) + { + RCC_OscInitStruct->LSEState = RCC_LSE_BYPASS; + } + else if((RCC->CSR &RCC_CSR_LSEON) == RCC_CSR_LSEON) + { + RCC_OscInitStruct->LSEState = RCC_LSE_ON; + } + else + { + RCC_OscInitStruct->LSEState = RCC_LSE_OFF; + } + + /* Get the LSI configuration -----------------------------------------------*/ + if((RCC->CSR &RCC_CSR_LSION) == RCC_CSR_LSION) + { + RCC_OscInitStruct->LSIState = RCC_LSI_ON; + } + else + { + RCC_OscInitStruct->LSIState = RCC_LSI_OFF; + } + + + /* Get the PLL configuration -----------------------------------------------*/ + if((RCC->CR &RCC_CR_PLLON) == RCC_CR_PLLON) + { + RCC_OscInitStruct->PLL.PLLState = RCC_PLL_ON; + } + else + { + RCC_OscInitStruct->PLL.PLLState = RCC_PLL_OFF; + } + RCC_OscInitStruct->PLL.PLLSource = (uint32_t)(RCC->CFGR & RCC_CFGR_PLLSRC); + RCC_OscInitStruct->PLL.PLLMUL = (uint32_t)(RCC->CFGR & RCC_CFGR_PLLMUL); + RCC_OscInitStruct->PLL.PLLDIV = (uint32_t)(RCC->CFGR & RCC_CFGR_PLLDIV); +} + +/** + * @brief Get the RCC_ClkInitStruct according to the internal + * RCC configuration registers. + * @param RCC_ClkInitStruct pointer to an RCC_ClkInitTypeDef structure that + * contains the current clock configuration. + * @param pFLatency Pointer on the Flash Latency. + * @retval None + */ +void HAL_RCC_GetClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t *pFLatency) +{ + /* Check the parameters */ + assert_param(RCC_ClkInitStruct != NULL); + assert_param(pFLatency != NULL); + + /* Set all possible values for the Clock type parameter --------------------*/ + RCC_ClkInitStruct->ClockType = RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2; + + /* Get the SYSCLK configuration --------------------------------------------*/ + RCC_ClkInitStruct->SYSCLKSource = (uint32_t)(RCC->CFGR & RCC_CFGR_SW); + + /* Get the HCLK configuration ----------------------------------------------*/ + RCC_ClkInitStruct->AHBCLKDivider = (uint32_t)(RCC->CFGR & RCC_CFGR_HPRE); + + /* Get the APB1 configuration ----------------------------------------------*/ + RCC_ClkInitStruct->APB1CLKDivider = (uint32_t)(RCC->CFGR & RCC_CFGR_PPRE1); + + /* Get the APB2 configuration ----------------------------------------------*/ + RCC_ClkInitStruct->APB2CLKDivider = (uint32_t)((RCC->CFGR & RCC_CFGR_PPRE2) >> 3); + + /* Get the Flash Wait State (Latency) configuration ------------------------*/ + *pFLatency = (uint32_t)(FLASH->ACR & FLASH_ACR_LATENCY); +} + +/** + * @brief This function handles the RCC CSS interrupt request. + * @note This API should be called under the NMI_Handler(). + * @retval None + */ +void HAL_RCC_NMI_IRQHandler(void) +{ + /* Check RCC CSSF flag */ + if(__HAL_RCC_GET_IT(RCC_IT_CSS)) + { + /* RCC Clock Security System interrupt user callback */ + HAL_RCC_CSSCallback(); + + /* Clear RCC CSS pending bit */ + __HAL_RCC_CLEAR_IT(RCC_IT_CSS); + } +} + +/** + * @brief RCC Clock Security System interrupt callback + * @retval none + */ +__weak void HAL_RCC_CSSCallback(void) +{ + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_RCC_CSSCallback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ +/** @addtogroup RCC_Private_Functions + * @{ + */ +/** + * @brief Update number of Flash wait states in line with MSI range and current + voltage range + * @param MSIrange MSI range value from RCC_MSIRANGE_0 to RCC_MSIRANGE_6 + * @retval HAL status + */ +static HAL_StatusTypeDef RCC_SetFlashLatencyFromMSIRange(uint32_t MSIrange) +{ + uint32_t vos = 0; + uint32_t latency = FLASH_LATENCY_0; /* default value 0WS */ + + /* HCLK can reach 4 MHz only if AHB prescaler = 1 */ + if (READ_BIT(RCC->CFGR, RCC_CFGR_HPRE) == RCC_SYSCLK_DIV1) + { + if(__HAL_RCC_PWR_IS_CLK_ENABLED()) + { + vos = HAL_PWREx_GetVoltageRange(); + } + else + { + __HAL_RCC_PWR_CLK_ENABLE(); + vos = HAL_PWREx_GetVoltageRange(); + __HAL_RCC_PWR_CLK_DISABLE(); + } + + /* Check if need to set latency 1 only for Range 3 & HCLK = 4MHz */ + if((vos == PWR_REGULATOR_VOLTAGE_SCALE3) && (MSIrange == RCC_MSIRANGE_6)) + { + latency = FLASH_LATENCY_1; /* 1WS */ + } + } + + __HAL_FLASH_SET_LATENCY(latency); + + /* Check that the new number of wait states is taken into account to access the Flash + memory by reading the FLASH_ACR register */ + if((FLASH->ACR & FLASH_ACR_LATENCY) != latency) + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @} + */ + +#endif /* HAL_RCC_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_rcc_ex.c b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_rcc_ex.c new file mode 100755 index 0000000..6597ed4 --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_rcc_ex.c @@ -0,0 +1,452 @@ +/** + ****************************************************************************** + * @file stm32l1xx_hal_rcc_ex.c + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief Extended RCC HAL module driver. + * This file provides firmware functions to manage the following + * functionalities RCC extension peripheral: + * + Extended Peripheral Control functions + * + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_hal.h" + +/** @addtogroup STM32L1xx_HAL_Driver + * @{ + */ + +#ifdef HAL_RCC_MODULE_ENABLED + +/** @defgroup RCCEx RCCEx + * @brief RCC Extension HAL module driver + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup RCCEx_Private_Constants RCCEx Private Constants + * @{ + */ +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/** @defgroup RCCEx_Private_Macros RCCEx Private Macros + * @{ + */ +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup RCCEx_Exported_Functions RCCEx Exported Functions + * @{ + */ + +/** @defgroup RCCEx_Exported_Functions_Group1 Extended Peripheral Control functions + * @brief Extended Peripheral Control functions + * +@verbatim + =============================================================================== + ##### Extended Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the RCC Clocks + frequencies. + [..] + (@) Important note: Care must be taken when HAL_RCCEx_PeriphCLKConfig() is used to + select the RTC clock source; in this case the Backup domain will be reset in + order to modify the RTC Clock source, as consequence RTC registers (including + the backup registers) are set to their reset values. + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the RCC extended peripherals clocks according to the specified + * parameters in the RCC_PeriphCLKInitTypeDef. + * @param PeriphClkInit pointer to an RCC_PeriphCLKInitTypeDef structure that + * contains the configuration information for the Extended Peripherals clocks(RTC/LCD clock). + * @retval HAL status + * @note If HAL_ERROR returned, first switch-OFF HSE clock oscillator with @ref HAL_RCC_OscConfig() + * to possibly update HSE divider. + */ +HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) +{ + uint32_t tickstart = 0U; + uint32_t temp_reg = 0U; + + /* Check the parameters */ + assert_param(IS_RCC_PERIPHCLOCK(PeriphClkInit->PeriphClockSelection)); + + /*------------------------------- RTC/LCD Configuration ------------------------*/ + if ((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) +#if defined(LCD) + || (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LCD) == RCC_PERIPHCLK_LCD) +#endif /* LCD */ + ) + { + /* check for RTC Parameters used to output RTCCLK */ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) + { + assert_param(IS_RCC_RTCCLKSOURCE(PeriphClkInit->RTCClockSelection)); + } + +#if defined(LCD) + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LCD) == RCC_PERIPHCLK_LCD) + { + assert_param(IS_RCC_RTCCLKSOURCE(PeriphClkInit->LCDClockSelection)); + } +#endif /* LCD */ + + FlagStatus pwrclkchanged = RESET; + + /* As soon as function is called to change RTC clock source, activation of the + power domain is done. */ + /* Requires to enable write access to Backup Domain of necessary */ + if(__HAL_RCC_PWR_IS_CLK_DISABLED()) + { + __HAL_RCC_PWR_CLK_ENABLE(); + pwrclkchanged = SET; + } + + if(HAL_IS_BIT_CLR(PWR->CR, PWR_CR_DBP)) + { + /* Enable write access to Backup domain */ + SET_BIT(PWR->CR, PWR_CR_DBP); + + /* Wait for Backup domain Write protection disable */ + tickstart = HAL_GetTick(); + + while(HAL_IS_BIT_CLR(PWR->CR, PWR_CR_DBP)) + { + if((HAL_GetTick() - tickstart) > RCC_DBP_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + + /* Check if user wants to change HSE RTC prescaler whereas HSE is enabled */ + temp_reg = (RCC->CR & RCC_CR_RTCPRE); + if ((temp_reg != (PeriphClkInit->RTCClockSelection & RCC_CR_RTCPRE)) +#if defined (LCD) + || (temp_reg != (PeriphClkInit->LCDClockSelection & RCC_CR_RTCPRE)) +#endif /* LCD */ + ) + { /* Check HSE State */ + if (((PeriphClkInit->RTCClockSelection & RCC_CSR_RTCSEL) == RCC_CSR_RTCSEL_HSE) && HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSERDY)) + { + /* To update HSE divider, first switch-OFF HSE clock oscillator*/ + return HAL_ERROR; + } + } + + /* Reset the Backup domain only if the RTC Clock source selection is modified from reset value */ + temp_reg = (RCC->CSR & RCC_CSR_RTCSEL); + + if((temp_reg != 0x00000000U) && (((temp_reg != (PeriphClkInit->RTCClockSelection & RCC_CSR_RTCSEL)) \ + && (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC)) +#if defined(LCD) + || ((temp_reg != (PeriphClkInit->LCDClockSelection & RCC_CSR_RTCSEL)) \ + && (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LCD) == RCC_PERIPHCLK_LCD)) +#endif /* LCD */ + )) + { + /* Store the content of CSR register before the reset of Backup Domain */ + temp_reg = (RCC->CSR & ~(RCC_CSR_RTCSEL)); + + /* RTC Clock selection can be changed only if the Backup Domain is reset */ + __HAL_RCC_BACKUPRESET_FORCE(); + __HAL_RCC_BACKUPRESET_RELEASE(); + + /* Restore the Content of CSR register */ + RCC->CSR = temp_reg; + + /* Wait for LSERDY if LSE was enabled */ + if (HAL_IS_BIT_SET(temp_reg, RCC_CSR_LSEON)) + { + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Wait till LSE is ready */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET) + { + if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + __HAL_RCC_RTC_CONFIG(PeriphClkInit->RTCClockSelection); + + /* Require to disable power clock if necessary */ + if(pwrclkchanged == SET) + { + __HAL_RCC_PWR_CLK_DISABLE(); + } + } + + return HAL_OK; +} + +/** + * @brief Get the PeriphClkInit according to the internal RCC configuration registers. + * @param PeriphClkInit pointer to an RCC_PeriphCLKInitTypeDef structure that + * returns the configuration information for the Extended Peripherals clocks(RTC/LCD clocks). + * @retval None + */ +void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) +{ + uint32_t srcclk = 0; + + /* Set all possible values for the extended clock type parameter------------*/ + PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_RTC; +#if defined(LCD) + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_LCD; +#endif /* LCD */ + + /* Get the RTC/LCD configuration -----------------------------------------------*/ + srcclk = __HAL_RCC_GET_RTC_SOURCE(); + if (srcclk != RCC_RTCCLKSOURCE_HSE_DIV2) + { + /* Source clock is LSE or LSI*/ + PeriphClkInit->RTCClockSelection = srcclk; + } + else + { + /* Source clock is HSE. Need to get the prescaler value*/ + PeriphClkInit->RTCClockSelection = srcclk | (READ_BIT(RCC->CR, RCC_CR_RTCPRE)); + } +#if defined(LCD) + PeriphClkInit->LCDClockSelection = PeriphClkInit->RTCClockSelection; +#endif /* LCD */ +} + +/** + * @brief Return the peripheral clock frequency + * @note Return 0 if peripheral clock is unknown + * @param PeriphClk Peripheral clock identifier + * This parameter can be one of the following values: + * @arg @ref RCC_PERIPHCLK_RTC RTC peripheral clock + * @arg @ref RCC_PERIPHCLK_LCD LCD peripheral clock (*) + * @note (*) means that this peripheral is not present on all the devices + * @retval Frequency in Hz (0: means that no available frequency for the peripheral) + */ +uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk) +{ + uint32_t temp_reg = 0U, clkprediv = 0U, frequency = 0U; + uint32_t srcclk = 0U; + + /* Check the parameters */ + assert_param(IS_RCC_PERIPHCLOCK(PeriphClk)); + + switch (PeriphClk) + { + case RCC_PERIPHCLK_RTC: +#if defined(LCD) + case RCC_PERIPHCLK_LCD: +#endif /* LCD */ + { + /* Get RCC CSR configuration ------------------------------------------------------*/ + temp_reg = RCC->CSR; + + /* Get the current RTC source */ + srcclk = __HAL_RCC_GET_RTC_SOURCE(); + + /* Check if LSE is ready if RTC clock selection is LSE */ + if ((srcclk == RCC_RTCCLKSOURCE_LSE) && (HAL_IS_BIT_SET(temp_reg, RCC_CSR_LSERDY))) + { + frequency = LSE_VALUE; + } + /* Check if LSI is ready if RTC clock selection is LSI */ + else if ((srcclk == RCC_RTCCLKSOURCE_LSI) && (HAL_IS_BIT_SET(temp_reg, RCC_CSR_LSIRDY))) + { + frequency = LSI_VALUE; + } + /* Check if HSE is ready and if RTC clock selection is HSE */ + else if ((srcclk == RCC_RTCCLKSOURCE_HSE_DIVX) && (HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSERDY))) + { + /* Get the current HSE clock divider */ + clkprediv = __HAL_RCC_GET_RTC_HSE_PRESCALER(); + + switch (clkprediv) + { + case RCC_RTC_HSE_DIV_16: /* HSE DIV16 has been selected */ + { + frequency = HSE_VALUE / 16U; + break; + } + case RCC_RTC_HSE_DIV_8: /* HSE DIV8 has been selected */ + { + frequency = HSE_VALUE / 8U; + break; + } + case RCC_RTC_HSE_DIV_4: /* HSE DIV4 has been selected */ + { + frequency = HSE_VALUE / 4U; + break; + } + default: /* HSE DIV2 has been selected */ + { + frequency = HSE_VALUE / 2U; + break; + } + } + } + /* Clock not enabled for RTC */ + else + { + frequency = 0U; + } + break; + } + default: + { + break; + } + } + return(frequency); +} + +#if defined(RCC_LSECSS_SUPPORT) +/** + * @brief Enables the LSE Clock Security System. + * @note If a failure is detected on the external 32 kHz oscillator, the LSE clock is no longer supplied + * to the RTC but no hardware action is made to the registers. + * In Standby mode a wakeup is generated. In other modes an interrupt can be sent to wakeup + * the software (see Section 5.3.4: Clock interrupt register (RCC_CIR) on page 104). + * The software MUST then disable the LSECSSON bit, stop the defective 32 kHz oscillator + * (disabling LSEON), and can change the RTC clock source (no clock or LSI or HSE, with + * RTCSEL), or take any required action to secure the application. + * @note LSE CSS available only for high density and medium+ devices + * @retval None + */ +void HAL_RCCEx_EnableLSECSS(void) +{ + *(__IO uint32_t *) CSR_LSECSSON_BB = (uint32_t)ENABLE; +} + +/** + * @brief Disables the LSE Clock Security System. + * @note Once enabled this bit cannot be disabled, except after an LSE failure detection + * (LSECSSD=1). In that case the software MUST disable the LSECSSON bit. + * Reset by power on reset and RTC software reset (RTCRST bit). + * @note LSE CSS available only for high density and medium+ devices + * @retval None + */ +void HAL_RCCEx_DisableLSECSS(void) +{ + /* Disable LSE CSS */ + *(__IO uint32_t *) CSR_LSECSSON_BB = (uint32_t)DISABLE; + + /* Disable LSE CSS IT */ + __HAL_RCC_DISABLE_IT(RCC_IT_LSECSS); +} + +/** + * @brief Enable the LSE Clock Security System IT & corresponding EXTI line. + * @note LSE Clock Security System IT is mapped on RTC EXTI line 19 + * @retval None + */ +void HAL_RCCEx_EnableLSECSS_IT(void) +{ + /* Enable LSE CSS */ + *(__IO uint32_t *) CSR_LSECSSON_BB = (uint32_t)ENABLE; + + /* Enable LSE CSS IT */ + __HAL_RCC_ENABLE_IT(RCC_IT_LSECSS); + + /* Enable IT on EXTI Line 19 */ + __HAL_RCC_LSECSS_EXTI_ENABLE_IT(); + __HAL_RCC_LSECSS_EXTI_ENABLE_RISING_EDGE(); +} + +/** + * @brief Handle the RCC LSE Clock Security System interrupt request. + * @retval None + */ +void HAL_RCCEx_LSECSS_IRQHandler(void) +{ + /* Check RCC LSE CSSF flag */ + if(__HAL_RCC_GET_IT(RCC_IT_LSECSS)) + { + /* RCC LSE Clock Security System interrupt user callback */ + HAL_RCCEx_LSECSS_Callback(); + + /* Clear RCC LSE CSS pending bit */ + __HAL_RCC_CLEAR_IT(RCC_IT_LSECSS); + } +} + +/** + * @brief RCCEx LSE Clock Security System interrupt callback. + * @retval none + */ +__weak void HAL_RCCEx_LSECSS_Callback(void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the @ref HAL_RCCEx_LSECSS_Callback should be implemented in the user file + */ +} +#endif /* RCC_LSECSS_SUPPORT */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_RCC_MODULE_ENABLED */ +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_rtc.c b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_rtc.c new file mode 100755 index 0000000..43c90f0 --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_rtc.c @@ -0,0 +1,922 @@ +/** + ****************************************************************************** + * @file stm32l1xx_hal_rtc.c + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief RTC HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Real Time Clock (RTC) peripheral: + * + Initialization and de-initialization functions + * + RTC Time and Date functions + * + RTC Alarm functions + * + Peripheral Control functions + * + Peripheral State functions + * + @verbatim + ============================================================================== + ##### Backup Domain Operating Condition ##### + ============================================================================== + [..] The real-time clock (RTC) and the RTC backup registers can be powered + from the VBAT voltage when the main VDD supply is powered off. + To retain the content of the RTC backup registers and supply the RTC + when VDD is turned off, VBAT pin can be connected to an optional + standby voltage supplied by a battery or by another source. + + [..] To allow the RTC operating even when the main digital supply (VDD) is turned + off, the VBAT pin powers the following blocks: + (#) The RTC + (#) The LSE oscillator + (#) PC13 to PC15 I/Os (when available) + + [..] When the backup domain is supplied by VDD (analog switch connected to VDD), + the following pins are available: + (#) PC14 and PC15 can be used as either GPIO or LSE pins + (#) PC13 can be used as a GPIO or as the RTC_AF1 pin + + [..] When the backup domain is supplied by VBAT (analog switch connected to VBAT + because VDD is not present), the following pins are available: + (#) PC14 and PC15 can be used as LSE pins only + (#) PC13 can be used as the RTC_AF1 pin + + ##### Backup Domain Reset ##### + ================================================================== + [..] The backup domain reset sets all RTC registers and the RCC_BDCR register + to their reset values. + [..] A backup domain reset is generated when one of the following events occurs: + (#) Software reset, triggered by setting the BDRST bit in the + RCC Backup domain control register (RCC_BDCR). + (#) VDD or VBAT power on, if both supplies have previously been powered off. + + ##### Backup Domain Access ##### + ================================================================== + [..] After reset, the backup domain (RTC registers, RTC backup data + registers and backup SRAM) is protected against possible unwanted write + accesses. + [..] To enable access to the RTC Domain and RTC registers, proceed as follows: + (+) Enable the Power Controller (PWR) APB1 interface clock using the + __HAL_RCC_PWR_CLK_ENABLE() function. + (+) Enable access to RTC domain using the HAL_PWR_EnableBkUpAccess() function. + (+) Select the RTC clock source using the __HAL_RCC_RTC_CONFIG() function. + (+) Enable RTC Clock using the __HAL_RCC_RTC_ENABLE() function. + + + ##### How to use this driver ##### + ================================================================== + [..] + (+) Enable the RTC domain access (see description in the section above). + (+) Configure the RTC Prescaler (Asynchronous and Synchronous) and RTC hour + format using the HAL_RTC_Init() function. + + *** Time and Date configuration *** + =================================== + [..] + (+) To configure the RTC Calendar (Time and Date) use the HAL_RTC_SetTime() + and HAL_RTC_SetDate() functions. + (+) To read the RTC Calendar, use the HAL_RTC_GetTime() and HAL_RTC_GetDate() functions. + + *** Alarm configuration *** + =========================== + [..] + (+) To configure the RTC Alarm use the HAL_RTC_SetAlarm() function. + You can also configure the RTC Alarm with interrupt mode using the HAL_RTC_SetAlarm_IT() function. + (+) To read the RTC Alarm, use the HAL_RTC_GetAlarm() function. + + ##### RTC and low power modes ##### + ================================================================== + [..] The MCU can be woken up from a low power mode by an RTC alternate + function. + [..] The RTC alternate functions are the RTC alarms (Alarm A and Alarm B), + RTC wakeup, RTC tamper event detection and RTC time stamp event detection. + These RTC alternate functions can wake up the system from the Stop and + Standby low power modes. + [..] The system can also wake up from low power modes without depending + on an external interrupt (Auto-wakeup mode), by using the RTC alarm + or the RTC wakeup events. + [..] The RTC provides a programmable time base for waking up from the + Stop or Standby mode at regular intervals. + Wakeup from STOP and STANDBY modes is possible only when the RTC clock source + is LSE or LSI. + + @endverbatim + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_hal.h" + +/** @addtogroup STM32L1xx_HAL_Driver + * @{ + */ + +/** @defgroup RTC RTC + * @brief RTC HAL module driver + * @{ + */ + +#ifdef HAL_RTC_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ +/** @defgroup RTC_Exported_Functions RTC Exported Functions + * @{ + */ + +/** @defgroup RTC_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] This section provides functions allowing to initialize and configure the + RTC Prescaler (Synchronous and Asynchronous), RTC Hour format, disable + RTC registers Write protection, enter and exit the RTC initialization mode, + RTC registers synchronization check and reference clock detection enable. + (#) The RTC Prescaler is programmed to generate the RTC 1Hz time base. + It is split into 2 programmable prescalers to minimize power consumption. + (++) A 7-bit asynchronous prescaler and a 13-bit synchronous prescaler. + (++) When both prescalers are used, it is recommended to configure the + asynchronous prescaler to a high value to minimize power consumption. + (#) All RTC registers are Write protected. Writing to the RTC registers + is enabled by writing a key into the Write Protection register, RTC_WPR. + (#) To configure the RTC Calendar, user application should enter + initialization mode. In this mode, the calendar counter is stopped + and its value can be updated. When the initialization sequence is + complete, the calendar restarts counting after 4 RTCCLK cycles. + (#) To read the calendar through the shadow registers after Calendar + initialization, calendar update or after wakeup from low power modes + the software must first clear the RSF flag. The software must then + wait until it is set again before reading the calendar, which means + that the calendar registers have been correctly copied into the + RTC_TR and RTC_DR shadow registers.The HAL_RTC_WaitForSynchro() function + implements the above software sequence (RSF clear and RSF check). + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the RTC peripheral + * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTC_Init(RTC_HandleTypeDef *hrtc) +{ + /* Check the RTC peripheral state */ + if(hrtc == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_RTC_ALL_INSTANCE(hrtc->Instance)); + assert_param(IS_RTC_HOUR_FORMAT(hrtc->Init.HourFormat)); + assert_param(IS_RTC_ASYNCH_PREDIV(hrtc->Init.AsynchPrediv)); + assert_param(IS_RTC_SYNCH_PREDIV(hrtc->Init.SynchPrediv)); + assert_param(IS_RTC_OUTPUT(hrtc->Init.OutPut)); + assert_param(IS_RTC_OUTPUT_POL(hrtc->Init.OutPutPolarity)); + assert_param(IS_RTC_OUTPUT_TYPE(hrtc->Init.OutPutType)); + + if(hrtc->State == HAL_RTC_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hrtc->Lock = HAL_UNLOCKED; + + /* Initialize RTC MSP */ + HAL_RTC_MspInit(hrtc); + } + + /* Set RTC state */ + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* Set Initialization mode */ + if(RTC_EnterInitMode(hrtc) != HAL_OK) + { + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + /* Set RTC state */ + hrtc->State = HAL_RTC_STATE_ERROR; + + return HAL_ERROR; + } + else + { + /* Clear RTC_CR FMT, OSEL and POL Bits */ + hrtc->Instance->CR &= ((uint32_t)~(RTC_CR_FMT | RTC_CR_OSEL | RTC_CR_POL)); + /* Set RTC_CR register */ + hrtc->Instance->CR |= (uint32_t)(hrtc->Init.HourFormat | hrtc->Init.OutPut | hrtc->Init.OutPutPolarity); + + /* Configure the RTC PRER */ + hrtc->Instance->PRER = (uint32_t)(hrtc->Init.SynchPrediv); + hrtc->Instance->PRER |= (uint32_t)(hrtc->Init.AsynchPrediv << 16); + + /* Exit Initialization mode */ + hrtc->Instance->ISR &= (uint32_t)~RTC_ISR_INIT; + + hrtc->Instance->TAFCR &= (uint32_t)~RTC_TAFCR_ALARMOUTTYPE; + hrtc->Instance->TAFCR |= (uint32_t)(hrtc->Init.OutPutType); + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + /* Set RTC state */ + hrtc->State = HAL_RTC_STATE_READY; + + return HAL_OK; + } +} + +/** + * @brief DeInitializes the RTC peripheral + * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @note This function doesn't reset the RTC Backup Data registers. + * @retval HAL status + */ +__weak HAL_StatusTypeDef HAL_RTC_DeInit(RTC_HandleTypeDef *hrtc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + /* Note : This function is defined into this file for library reference. */ + /* Function content is located into file stm32l1xx_hal_rtc_ex.c */ + + /* Return function status */ + return HAL_ERROR; +} + +/** + * @brief Initializes the RTC MSP. + * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @retval None + */ +__weak void HAL_RTC_MspInit(RTC_HandleTypeDef* hrtc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_RTC_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes the RTC MSP. + * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @retval None + */ +__weak void HAL_RTC_MspDeInit(RTC_HandleTypeDef* hrtc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_RTC_MspDeInit could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup RTC_Exported_Functions_Group2 RTC Time and Date functions + * @brief RTC Time and Date functions + * +@verbatim + =============================================================================== + ##### RTC Time and Date functions ##### + =============================================================================== + + [..] This section provides functions allowing to configure Time and Date features + +@endverbatim + * @{ + */ + +/** + * @brief Sets RTC current time. + * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @param sTime: Pointer to Time structure + * @param Format: Specifies the format of the entered parameters. + * This parameter can be one of the following values: + * @arg RTC_FORMAT_BIN: Binary data format + * @arg RTC_FORMAT_BCD: BCD data format + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTC_SetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_RTC_FORMAT(Format)); + assert_param(IS_RTC_DAYLIGHT_SAVING(sTime->DayLightSaving)); + assert_param(IS_RTC_STORE_OPERATION(sTime->StoreOperation)); + + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + if(Format == RTC_FORMAT_BIN) + { + if((hrtc->Instance->CR & RTC_CR_FMT) != (uint32_t)RESET) + { + assert_param(IS_RTC_HOUR12(sTime->Hours)); + assert_param(IS_RTC_HOURFORMAT12(sTime->TimeFormat)); + } + else + { + sTime->TimeFormat = 0x00; + assert_param(IS_RTC_HOUR24(sTime->Hours)); + } + assert_param(IS_RTC_MINUTES(sTime->Minutes)); + assert_param(IS_RTC_SECONDS(sTime->Seconds)); + + tmpreg = (uint32_t)(((uint32_t)RTC_ByteToBcd2(sTime->Hours) << 16) | \ + ((uint32_t)RTC_ByteToBcd2(sTime->Minutes) << 8) | \ + ((uint32_t)RTC_ByteToBcd2(sTime->Seconds)) | \ + (((uint32_t)sTime->TimeFormat) << 16)); + } + else + { + if((hrtc->Instance->CR & RTC_CR_FMT) != (uint32_t)RESET) + { + tmpreg = RTC_Bcd2ToByte(sTime->Hours); + assert_param(IS_RTC_HOUR12(tmpreg)); + assert_param(IS_RTC_HOURFORMAT12(sTime->TimeFormat)); + } + else + { + sTime->TimeFormat = 0x00; + assert_param(IS_RTC_HOUR24(RTC_Bcd2ToByte(sTime->Hours))); + } + assert_param(IS_RTC_MINUTES(RTC_Bcd2ToByte(sTime->Minutes))); + assert_param(IS_RTC_SECONDS(RTC_Bcd2ToByte(sTime->Seconds))); + tmpreg = (((uint32_t)(sTime->Hours) << 16) | \ + ((uint32_t)(sTime->Minutes) << 8) | \ + ((uint32_t)sTime->Seconds) | \ + ((uint32_t)(sTime->TimeFormat) << 16)); + } + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* Set Initialization mode */ + if(RTC_EnterInitMode(hrtc) != HAL_OK) + { + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + /* Set RTC state */ + hrtc->State = HAL_RTC_STATE_ERROR; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_ERROR; + } + else + { + /* Set the RTC_TR register */ + hrtc->Instance->TR = (uint32_t)(tmpreg & RTC_TR_RESERVED_MASK); + + /* Clear the bits to be configured */ + hrtc->Instance->CR &= (uint32_t)~RTC_CR_BCK; + + /* Configure the RTC_CR register */ + hrtc->Instance->CR |= (uint32_t)(sTime->DayLightSaving | sTime->StoreOperation); + + /* Exit Initialization mode */ + hrtc->Instance->ISR &= (uint32_t)~RTC_ISR_INIT; + + /* Wait for synchro */ + if(HAL_RTC_WaitForSynchro(hrtc) != HAL_OK) + { + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + hrtc->State = HAL_RTC_STATE_ERROR; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_ERROR; + } + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + hrtc->State = HAL_RTC_STATE_READY; + + __HAL_UNLOCK(hrtc); + + return HAL_OK; + } +} + + +/** + * @brief Sets RTC current date. + * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @param sDate: Pointer to date structure + * @param Format: specifies the format of the entered parameters. + * This parameter can be one of the following values: + * @arg RTC_FORMAT_BIN: Binary data format + * @arg RTC_FORMAT_BCD: BCD data format + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTC_SetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format) +{ + uint32_t datetmpreg = 0; + + /* Check the parameters */ + assert_param(IS_RTC_FORMAT(Format)); + + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + if((Format == RTC_FORMAT_BIN) && ((sDate->Month & 0x10) == 0x10)) + { + sDate->Month = (uint8_t)((sDate->Month & (uint8_t)~(0x10)) + (uint8_t)0x0A); + } + + assert_param(IS_RTC_WEEKDAY(sDate->WeekDay)); + + if(Format == RTC_FORMAT_BIN) + { + assert_param(IS_RTC_YEAR(sDate->Year)); + assert_param(IS_RTC_MONTH(sDate->Month)); + assert_param(IS_RTC_DATE(sDate->Date)); + + datetmpreg = (((uint32_t)RTC_ByteToBcd2(sDate->Year) << 16) | \ + ((uint32_t)RTC_ByteToBcd2(sDate->Month) << 8) | \ + ((uint32_t)RTC_ByteToBcd2(sDate->Date)) | \ + ((uint32_t)sDate->WeekDay << 13)); + } + else + { + assert_param(IS_RTC_YEAR(RTC_Bcd2ToByte(sDate->Year))); + datetmpreg = RTC_Bcd2ToByte(sDate->Month); + assert_param(IS_RTC_MONTH(datetmpreg)); + datetmpreg = RTC_Bcd2ToByte(sDate->Date); + assert_param(IS_RTC_DATE(datetmpreg)); + + datetmpreg = ((((uint32_t)sDate->Year) << 16) | \ + (((uint32_t)sDate->Month) << 8) | \ + ((uint32_t)sDate->Date) | \ + (((uint32_t)sDate->WeekDay) << 13)); + } + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* Set Initialization mode */ + if(RTC_EnterInitMode(hrtc) != HAL_OK) + { + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + /* Set RTC state*/ + hrtc->State = HAL_RTC_STATE_ERROR; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_ERROR; + } + else + { + /* Set the RTC_DR register */ + hrtc->Instance->DR = (uint32_t)(datetmpreg & RTC_DR_RESERVED_MASK); + + /* Exit Initialization mode */ + hrtc->Instance->ISR &= (uint32_t)~RTC_ISR_INIT; + + /* Wait for synchro */ + if(HAL_RTC_WaitForSynchro(hrtc) != HAL_OK) + { + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + hrtc->State = HAL_RTC_STATE_ERROR; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_ERROR; + } + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + hrtc->State = HAL_RTC_STATE_READY ; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; + } +} + +/** + * @brief Gets RTC current date. + * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @param sDate: Pointer to Date structure + * @param Format: Specifies the format of the entered parameters. + * This parameter can be one of the following values: + * @arg RTC_FORMAT_BIN: Binary data format + * @arg RTC_FORMAT_BCD: BCD data format + * @note You must call HAL_RTC_GetDate() after HAL_RTC_GetTime() to unlock the values + * in the higher-order calendar shadow registers to ensure consistency between the time and date values. + * Reading RTC current time locks the values in calendar shadow registers until Current date is read. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTC_GetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format) +{ + uint32_t datetmpreg = 0; + + /* Check the parameters */ + assert_param(IS_RTC_FORMAT(Format)); + + /* Get the DR register */ + datetmpreg = (uint32_t)(hrtc->Instance->DR & RTC_DR_RESERVED_MASK); + + /* Fill the structure fields with the read parameters */ + sDate->Year = (uint8_t)((datetmpreg & (RTC_DR_YT | RTC_DR_YU)) >> 16); + sDate->Month = (uint8_t)((datetmpreg & (RTC_DR_MT | RTC_DR_MU)) >> 8); + sDate->Date = (uint8_t)(datetmpreg & (RTC_DR_DT | RTC_DR_DU)); + sDate->WeekDay = (uint8_t)((datetmpreg & (RTC_DR_WDU)) >> 13); + + /* Check the input parameters format */ + if(Format == RTC_FORMAT_BIN) + { + /* Convert the date structure parameters to Binary format */ + sDate->Year = (uint8_t)RTC_Bcd2ToByte(sDate->Year); + sDate->Month = (uint8_t)RTC_Bcd2ToByte(sDate->Month); + sDate->Date = (uint8_t)RTC_Bcd2ToByte(sDate->Date); + } + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup RTC_Exported_Functions_Group3 RTC Alarm functions + * @brief RTC Alarm functions + * +@verbatim + =============================================================================== + ##### RTC Alarm functions ##### + =============================================================================== + + [..] This section provides functions allowing to configure Alarm feature + +@endverbatim + * @{ + */ + +/** + * @brief Deactive the specified RTC Alarm + * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @param Alarm: Specifies the Alarm. + * This parameter can be one of the following values: + * @arg RTC_ALARM_A: AlarmA + * @arg RTC_ALARM_B: AlarmB + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTC_DeactivateAlarm(RTC_HandleTypeDef *hrtc, uint32_t Alarm) +{ + uint32_t tickstart = 0; + + /* Check the parameters */ + assert_param(IS_RTC_ALARM(Alarm)); + + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + if(Alarm == RTC_ALARM_A) + { + /* AlarmA */ + __HAL_RTC_ALARMA_DISABLE(hrtc); + + /* In case of interrupt mode is used, the interrupt source must disabled */ + __HAL_RTC_ALARM_DISABLE_IT(hrtc, RTC_IT_ALRA); + + tickstart = HAL_GetTick(); + + /* Wait till RTC ALRxWF flag is set and if Time out is reached exit */ + while(__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRAWF) == RESET) + { + if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE) + { + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + hrtc->State = HAL_RTC_STATE_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_TIMEOUT; + } + } + } + else + { + /* AlarmB */ + __HAL_RTC_ALARMB_DISABLE(hrtc); + + /* In case of interrupt mode is used, the interrupt source must disabled */ + __HAL_RTC_ALARM_DISABLE_IT(hrtc,RTC_IT_ALRB); + + tickstart = HAL_GetTick(); + + /* Wait till RTC ALRxWF flag is set and if Time out is reached exit */ + while(__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRBWF) == RESET) + { + if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE) + { + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + hrtc->State = HAL_RTC_STATE_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_TIMEOUT; + } + } + } + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief This function handles Alarm interrupt request. + * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @retval None + */ +void HAL_RTC_AlarmIRQHandler(RTC_HandleTypeDef* hrtc) +{ + /* Get the AlarmA interrupt source enable status */ + if(__HAL_RTC_ALARM_GET_IT_SOURCE(hrtc, RTC_IT_ALRA) != RESET) + { + /* Get the pending status of the AlarmA Interrupt */ + if(__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRAF) != RESET) + { + /* AlarmA callback */ + HAL_RTC_AlarmAEventCallback(hrtc); + + /* Clear the AlarmA interrupt pending bit */ + __HAL_RTC_ALARM_CLEAR_FLAG(hrtc, RTC_FLAG_ALRAF); + } + } + + /* Get the AlarmB interrupt source enable status */ + if(__HAL_RTC_ALARM_GET_IT_SOURCE(hrtc, RTC_IT_ALRB) != RESET) + { + /* Get the pending status of the AlarmB Interrupt */ + if(__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRBF) != RESET) + { + /* AlarmB callback */ + HAL_RTCEx_AlarmBEventCallback(hrtc); + + /* Clear the AlarmB interrupt pending bit */ + __HAL_RTC_ALARM_CLEAR_FLAG(hrtc, RTC_FLAG_ALRBF); + } + } + + /* Clear the EXTI's line Flag for RTC Alarm */ + __HAL_RTC_ALARM_EXTI_CLEAR_FLAG(); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; +} + +/** + * @brief Alarm A callback. + * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @retval None + */ +__weak void HAL_RTC_AlarmAEventCallback(RTC_HandleTypeDef *hrtc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_RTC_AlarmAEventCallback could be implemented in the user file + */ +} + +/** + * @brief This function handles AlarmA Polling request. + * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @param Timeout: Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTC_PollForAlarmAEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout) +{ + + uint32_t tickstart = HAL_GetTick(); + + while(__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRAF) == RESET) + { + if(Timeout != HAL_MAX_DELAY) + { + if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout)) + { + hrtc->State = HAL_RTC_STATE_TIMEOUT; + return HAL_TIMEOUT; + } + } + } + + /* Clear the Alarm interrupt pending bit */ + __HAL_RTC_ALARM_CLEAR_FLAG(hrtc, RTC_FLAG_ALRAF); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; + + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup RTC_Exported_Functions_Group5 Peripheral State functions + * @brief Peripheral State functions + * +@verbatim + =============================================================================== + ##### Peripheral State functions ##### + =============================================================================== + [..] + This subsection provides functions allowing to + (+) Get RTC state + +@endverbatim + * @{ + */ +/** + * @brief Returns the RTC state. + * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @retval HAL state + */ +HAL_RTCStateTypeDef HAL_RTC_GetState(RTC_HandleTypeDef* hrtc) +{ + return hrtc->State; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup RTC_Internal_Functions RTC Internal function + * @{ + */ + +/** + * @brief Enters the RTC Initialization mode. + * @note The RTC Initialization mode is write protected, use the + * __HAL_RTC_WRITEPROTECTION_DISABLE() before calling this function. + * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @retval HAL status + */ +HAL_StatusTypeDef RTC_EnterInitMode(RTC_HandleTypeDef* hrtc) +{ + uint32_t tickstart = 0; + + /* Check if the Initialization mode is set */ + if((hrtc->Instance->ISR & RTC_ISR_INITF) == (uint32_t)RESET) + { + /* Set the Initialization mode */ + hrtc->Instance->ISR = (uint32_t)RTC_INIT_MASK; + + tickstart = HAL_GetTick(); + /* Wait till RTC is in INIT state and if Time out is reached exit */ + while((hrtc->Instance->ISR & RTC_ISR_INITF) == (uint32_t)RESET) + { + if((HAL_GetTick() - tickstart) > RTC_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + + return HAL_OK; +} + +/** + * @brief Converts a 2 digit decimal to BCD format. + * @param Value: Byte to be converted + * @retval Converted byte + */ +uint8_t RTC_ByteToBcd2(uint8_t Value) +{ + uint32_t bcdhigh = 0; + + while(Value >= 10) + { + bcdhigh++; + Value -= 10; + } + + return ((uint8_t)(bcdhigh << 4) | Value); +} + +/** + * @brief Converts from 2 digit BCD to Binary. + * @param Value: BCD value to be converted + * @retval Converted word + */ +uint8_t RTC_Bcd2ToByte(uint8_t Value) +{ + uint32_t tmp = 0; + tmp = ((uint8_t)(Value & (uint8_t)0xF0) >> (uint8_t)0x4) * 10; + return (tmp + (Value & (uint8_t)0x0F)); +} + + +/** + * @} + */ + +#endif /* HAL_RTC_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_rtc_ex.c b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_rtc_ex.c new file mode 100755 index 0000000..f759d1c --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_rtc_ex.c @@ -0,0 +1,2557 @@ +/** + ****************************************************************************** + * @file stm32l1xx_hal_rtc_ex.c + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief Extended RTC HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Real Time Clock (RTC) Extension peripheral: + * + RTC Time Stamp functions + * + RTC Tamper functions + * + RTC Wake-up functions + * + Extension Control functions + * + Extension RTC features functions + * + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + (+) Enable the RTC domain access. + (+) Configure the RTC Prescaler (Asynchronous and Synchronous) and RTC hour + format using the HAL_RTC_Init() function. + + *** RTC Wakeup configuration *** + ================================ + [..] + (+) To configure the RTC Wakeup Clock source and Counter use the HAL_RTCEx_SetWakeUpTimer() + function. You can also configure the RTC Wakeup timer with interrupt mode + using the HAL_RTCEx_SetWakeUpTimer_IT() function. + (+) To read the RTC WakeUp Counter register, use the HAL_RTCEx_GetWakeUpTimer() + function. + + *** TimeStamp configuration *** + =============================== + [..] + (+) Configure the RTC_AFx trigger and enable the RTC TimeStamp using the + HAL_RTCEx_SetTimeStamp() function. You can also configure the RTC TimeStamp with + interrupt mode using the HAL_RTCEx_SetTimeStamp_IT() function. + (+) To read the RTC TimeStamp Time and Date register, use the HAL_RTCEx_GetTimeStamp() + function. + (+) The TIMESTAMP alternate function can be mapped to RTC_AF1 (PC13). + + *** Tamper configuration *** + ============================ + [..] + (+) Enable the RTC Tamper and configure the Tamper filter count, trigger Edge + or Level according to the Tamper filter (if equal to 0 Edge else Level) + value, sampling frequency, precharge or discharge and Pull-UP using the + HAL_RTCEx_SetTamper() function. You can configure RTC Tamper with interrupt + mode using HAL_RTCEx_SetTamper_IT() function. + (+) The TAMPER1 alternate function can be mapped to RTC_AF1 (PC13). + + *** Backup Data Registers configuration *** + =========================================== + [..] + (+) To write to the RTC Backup Data registers, use the HAL_RTCEx_BKUPWrite() + function. + (+) To read the RTC Backup Data registers, use the HAL_RTCEx_BKUPRead() + function. + + @endverbatim + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_hal.h" + +/** @addtogroup STM32L1xx_HAL_Driver + * @{ + */ + +/** @addtogroup RTC + * @{ + */ + +#ifdef HAL_RTC_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @addtogroup RTC_Exported_Functions + * @{ + */ + + +/** @addtogroup RTC_Exported_Functions_Group1 + * @{ + */ + +/** + * @brief DeInitializes the RTC peripheral + * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @note This function does not reset the RTC Backup Data registers. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTC_DeInit(RTC_HandleTypeDef *hrtc) +{ + uint32_t tickstart = 0; + + /* Check the parameters */ + assert_param(IS_RTC_ALL_INSTANCE(hrtc->Instance)); + + /* Set RTC state */ + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* Set Initialization mode */ + if(RTC_EnterInitMode(hrtc) != HAL_OK) + { + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + /* Set RTC state */ + hrtc->State = HAL_RTC_STATE_ERROR; + + return HAL_ERROR; + } + else + { + /* Reset TR, DR and CR registers */ + hrtc->Instance->TR = (uint32_t)0x00000000; + hrtc->Instance->DR = (uint32_t)0x00002101; + /* Reset All CR bits except CR[2:0] */ + hrtc->Instance->CR &= (uint32_t)0x00000007; + + tickstart = HAL_GetTick(); + + /* Wait till WUTWF flag is set and if Time out is reached exit */ + while(((hrtc->Instance->ISR) & RTC_ISR_WUTWF) == (uint32_t)RESET) + { + if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE) + { + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + /* Set RTC state */ + hrtc->State = HAL_RTC_STATE_TIMEOUT; + + return HAL_TIMEOUT; + } + } + + /* Reset all RTC CR register bits */ + hrtc->Instance->CR &= (uint32_t)0x00000000; + hrtc->Instance->WUTR = (uint32_t)0x0000FFFF; + hrtc->Instance->PRER = (uint32_t)0x007F00FF; + hrtc->Instance->CALIBR = (uint32_t)0x00000000; + hrtc->Instance->ALRMAR = (uint32_t)0x00000000; + hrtc->Instance->ALRMBR = (uint32_t)0x00000000; +#if defined(STM32L100xBA) || defined (STM32L151xBA) || defined (STM32L152xBA) || defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) + hrtc->Instance->SHIFTR = (uint32_t)0x00000000; + hrtc->Instance->CALR = (uint32_t)0x00000000; + hrtc->Instance->ALRMASSR = (uint32_t)0x00000000; + hrtc->Instance->ALRMBSSR = (uint32_t)0x00000000; +#endif /* STM32L100xBA || STM32L151xBA || STM32L152xBA || STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ + /* Reset ISR register and exit initialization mode */ + hrtc->Instance->ISR = (uint32_t)0x00000000; + + /* Reset Tamper and alternate functions configuration register */ + hrtc->Instance->TAFCR = 0x00000000; + + /* Wait for synchro */ + if(HAL_RTC_WaitForSynchro(hrtc) != HAL_OK) + { + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + hrtc->State = HAL_RTC_STATE_ERROR; + + return HAL_ERROR; + } + } + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + /* De-Initialize RTC MSP */ + HAL_RTC_MspDeInit(hrtc); + + hrtc->State = HAL_RTC_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @} + */ + +/** @addtogroup RTC_Exported_Functions_Group2 + * @{ + */ + +/** + * @brief Get RTC current time. + * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @param sTime: Pointer to Time structure with Hours, Minutes and Seconds fields returned + * with input format (BIN or BCD), also SubSeconds field (if availabale) returning the + * RTC_SSR register content and SecondFraction field the Synchronous pre-scaler + * factor to be used for second fraction ratio computation. + * @param Format: Specifies the format of the entered parameters. + * This parameter can be one of the following values: + * @arg RTC_FORMAT_BIN: Binary data format + * @arg RTC_FORMAT_BCD: BCD data format + * @note If available, you can use SubSeconds and SecondFraction (sTime structure fields returned) to convert SubSeconds + * value in second fraction ratio with time unit following generic formula: + * Second fraction ratio * time_unit= [(SecondFraction-SubSeconds)/(SecondFraction+1)] * time_unit + * This conversion can be performed only if no shift operation is pending (ie. SHFP=0) when PREDIV_S >= SS + * @note You must call HAL_RTC_GetDate() after HAL_RTC_GetTime() to unlock the values + * in the higher-order calendar shadow registers to ensure consistency between the time and date values. + * Reading RTC current time locks the values in calendar shadow registers until Current date is read + * to ensure consistency between the time and date values. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTC_GetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_RTC_FORMAT(Format)); + +#if defined(STM32L100xBA) || defined (STM32L151xBA) || defined (STM32L152xBA) || defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) + /* Get subseconds structure field from the corresponding register*/ + sTime->SubSeconds = (uint32_t)((hrtc->Instance->SSR) & RTC_SSR_SS); + + /* Get SecondFraction structure field from the corresponding register field*/ + sTime->SecondFraction = (uint32_t)(hrtc->Instance->PRER & RTC_PRER_PREDIV_S); +#endif /* STM32L100xBA || STM32L151xBA || STM32L152xBA || STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ + + /* Get the TR register */ + tmpreg = (uint32_t)(hrtc->Instance->TR & RTC_TR_RESERVED_MASK); + + /* Fill the structure fields with the read parameters */ + sTime->Hours = (uint8_t)((tmpreg & (RTC_TR_HT | RTC_TR_HU)) >> 16); + sTime->Minutes = (uint8_t)((tmpreg & (RTC_TR_MNT | RTC_TR_MNU)) >>8); + sTime->Seconds = (uint8_t)(tmpreg & (RTC_TR_ST | RTC_TR_SU)); + sTime->TimeFormat = (uint8_t)((tmpreg & (RTC_TR_PM)) >> 16); + + /* Check the input parameters format */ + if(Format == RTC_FORMAT_BIN) + { + /* Convert the time structure parameters to Binary format */ + sTime->Hours = (uint8_t)RTC_Bcd2ToByte(sTime->Hours); + sTime->Minutes = (uint8_t)RTC_Bcd2ToByte(sTime->Minutes); + sTime->Seconds = (uint8_t)RTC_Bcd2ToByte(sTime->Seconds); + } + + return HAL_OK; +} + +/** + * @} + */ + +/** @addtogroup RTC_Exported_Functions_Group3 + * @{ + */ + +/** + * @brief Sets the specified RTC Alarm. + * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @param sAlarm: Pointer to Alarm structure + * @param Format: Specifies the format of the entered parameters. + * This parameter can be one of the following values: + * @arg RTC_FORMAT_BIN: Binary data format + * @arg RTC_FORMAT_BCD: BCD data format + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTC_SetAlarm(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Format) +{ + uint32_t tickstart = 0; + uint32_t tmpreg = 0; + +#if defined(STM32L100xBA) || defined (STM32L151xBA) || defined (STM32L152xBA) || defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) + uint32_t subsecondtmpreg = 0; +#endif /* STM32L100xBA || STM32L151xBA || STM32L152xBA || STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ + + /* Check the parameters */ + assert_param(IS_RTC_FORMAT(Format)); + assert_param(IS_RTC_ALARM(sAlarm->Alarm)); + assert_param(IS_RTC_ALARM_MASK(sAlarm->AlarmMask)); + assert_param(IS_RTC_ALARM_DATE_WEEKDAY_SEL(sAlarm->AlarmDateWeekDaySel)); +#if defined(STM32L100xBA) || defined (STM32L151xBA) || defined (STM32L152xBA) || defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) + assert_param(IS_RTC_ALARM_SUB_SECOND_VALUE(sAlarm->AlarmTime.SubSeconds)); + assert_param(IS_RTC_ALARM_SUB_SECOND_MASK(sAlarm->AlarmSubSecondMask)); +#endif /* STM32L100xBA || STM32L151xBA || STM32L152xBA || STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ + + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + if(Format == RTC_FORMAT_BIN) + { + if((hrtc->Instance->CR & RTC_CR_FMT) != (uint32_t)RESET) + { + assert_param(IS_RTC_HOUR12(sAlarm->AlarmTime.Hours)); + assert_param(IS_RTC_HOURFORMAT12(sAlarm->AlarmTime.TimeFormat)); + } + else + { + sAlarm->AlarmTime.TimeFormat = 0x00; + assert_param(IS_RTC_HOUR24(sAlarm->AlarmTime.Hours)); + } + assert_param(IS_RTC_MINUTES(sAlarm->AlarmTime.Minutes)); + assert_param(IS_RTC_SECONDS(sAlarm->AlarmTime.Seconds)); + + if(sAlarm->AlarmDateWeekDaySel == RTC_ALARMDATEWEEKDAYSEL_DATE) + { + assert_param(IS_RTC_ALARM_DATE_WEEKDAY_DATE(sAlarm->AlarmDateWeekDay)); + } + else + { + assert_param(IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(sAlarm->AlarmDateWeekDay)); + } + + tmpreg = (((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Hours) << 16) | \ + ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Minutes) << 8) | \ + ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Seconds)) | \ + ((uint32_t)(sAlarm->AlarmTime.TimeFormat) << 16) | \ + ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmDateWeekDay) << 24) | \ + ((uint32_t)sAlarm->AlarmDateWeekDaySel) | \ + ((uint32_t)sAlarm->AlarmMask)); + } + else + { + if((hrtc->Instance->CR & RTC_CR_FMT) != (uint32_t)RESET) + { + tmpreg = RTC_Bcd2ToByte(sAlarm->AlarmTime.Hours); + assert_param(IS_RTC_HOUR12(tmpreg)); + assert_param(IS_RTC_HOURFORMAT12(sAlarm->AlarmTime.TimeFormat)); + } + else + { + sAlarm->AlarmTime.TimeFormat = 0x00; + assert_param(IS_RTC_HOUR24(RTC_Bcd2ToByte(sAlarm->AlarmTime.Hours))); + } + + assert_param(IS_RTC_MINUTES(RTC_Bcd2ToByte(sAlarm->AlarmTime.Minutes))); + assert_param(IS_RTC_SECONDS(RTC_Bcd2ToByte(sAlarm->AlarmTime.Seconds))); + + if(sAlarm->AlarmDateWeekDaySel == RTC_ALARMDATEWEEKDAYSEL_DATE) + { + tmpreg = RTC_Bcd2ToByte(sAlarm->AlarmDateWeekDay); + assert_param(IS_RTC_ALARM_DATE_WEEKDAY_DATE(tmpreg)); + } + else + { + tmpreg = RTC_Bcd2ToByte(sAlarm->AlarmDateWeekDay); + assert_param(IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(tmpreg)); + } + + tmpreg = (((uint32_t)(sAlarm->AlarmTime.Hours) << 16) | \ + ((uint32_t)(sAlarm->AlarmTime.Minutes) << 8) | \ + ((uint32_t) sAlarm->AlarmTime.Seconds) | \ + ((uint32_t)(sAlarm->AlarmTime.TimeFormat) << 16) | \ + ((uint32_t)(sAlarm->AlarmDateWeekDay) << 24) | \ + ((uint32_t)sAlarm->AlarmDateWeekDaySel) | \ + ((uint32_t)sAlarm->AlarmMask)); + } + +#if defined(STM32L100xBA) || defined (STM32L151xBA) || defined (STM32L152xBA) || defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) + /* Configure the Alarm A or Alarm B Sub Second registers */ + subsecondtmpreg = (uint32_t)((uint32_t)(sAlarm->AlarmTime.SubSeconds) | (uint32_t)(sAlarm->AlarmSubSecondMask)); +#endif /* STM32L100xBA || STM32L151xBA || STM32L152xBA || STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* Configure the Alarm register */ + if(sAlarm->Alarm == RTC_ALARM_A) + { + /* Disable the Alarm A interrupt */ + __HAL_RTC_ALARMA_DISABLE(hrtc); + + /* In case of interrupt mode is used, the interrupt source must disabled */ + __HAL_RTC_ALARM_DISABLE_IT(hrtc, RTC_IT_ALRA); + + tickstart = HAL_GetTick(); + /* Wait till RTC ALRAWF flag is set and if Time out is reached exit */ + while(__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRAWF) == RESET) + { + if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE) + { + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + hrtc->State = HAL_RTC_STATE_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_TIMEOUT; + } + } + + hrtc->Instance->ALRMAR = (uint32_t)tmpreg; +#if defined(STM32L100xBA) || defined (STM32L151xBA) || defined (STM32L152xBA) || defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) + /* Configure the Alarm A Sub Second register */ + hrtc->Instance->ALRMASSR = subsecondtmpreg; +#endif /* STM32L100xBA || STM32L151xBA || STM32L152xBA || STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ + /* Configure the Alarm state: Enable Alarm */ + __HAL_RTC_ALARMA_ENABLE(hrtc); + } + else + { + /* Disable the Alarm B interrupt */ + __HAL_RTC_ALARMB_DISABLE(hrtc); + + /* In case of interrupt mode is used, the interrupt source must disabled */ + __HAL_RTC_ALARM_DISABLE_IT(hrtc, RTC_IT_ALRB); + + tickstart = HAL_GetTick(); + /* Wait till RTC ALRBWF flag is set and if Time out is reached exit */ + while(__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRBWF) == RESET) + { + if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE) + { + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + hrtc->State = HAL_RTC_STATE_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_TIMEOUT; + } + } + + hrtc->Instance->ALRMBR = (uint32_t)tmpreg; +#if defined(STM32L100xBA) || defined (STM32L151xBA) || defined (STM32L152xBA) || defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) + /* Configure the Alarm B Sub Second register */ + hrtc->Instance->ALRMBSSR = subsecondtmpreg; +#endif /* STM32L100xBA || STM32L151xBA || STM32L152xBA || STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ + /* Configure the Alarm state: Enable Alarm */ + __HAL_RTC_ALARMB_ENABLE(hrtc); + } + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Sets the specified RTC Alarm with Interrupt + * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @param sAlarm: Pointer to Alarm structure + * @param Format: Specifies the format of the entered parameters. + * This parameter can be one of the following values: + * @arg RTC_FORMAT_BIN: Binary data format + * @arg RTC_FORMAT_BCD: BCD data format + * @note The Alarm register can only be written when the corresponding Alarm + * is disabled (Use the HAL_RTC_DeactivateAlarm()). + * @note The HAL_RTC_SetTime() must be called before enabling the Alarm feature. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTC_SetAlarm_IT(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Format) +{ + uint32_t tickstart = 0; + uint32_t tmpreg = 0; +#if defined(STM32L100xBA) || defined (STM32L151xBA) || defined (STM32L152xBA) || defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) + uint32_t subsecondtmpreg = 0; +#endif /* STM32L100xBA || STM32L151xBA || STM32L152xBA || STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ + + /* Check the parameters */ + assert_param(IS_RTC_FORMAT(Format)); + assert_param(IS_RTC_ALARM(sAlarm->Alarm)); + assert_param(IS_RTC_ALARM_MASK(sAlarm->AlarmMask)); + assert_param(IS_RTC_ALARM_DATE_WEEKDAY_SEL(sAlarm->AlarmDateWeekDaySel)); +#if defined(STM32L100xBA) || defined (STM32L151xBA) || defined (STM32L152xBA) || defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) + assert_param(IS_RTC_ALARM_SUB_SECOND_VALUE(sAlarm->AlarmTime.SubSeconds)); + assert_param(IS_RTC_ALARM_SUB_SECOND_MASK(sAlarm->AlarmSubSecondMask)); +#endif /* STM32L100xBA || STM32L151xBA || STM32L152xBA || STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ + + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + if(Format == RTC_FORMAT_BIN) + { + if((hrtc->Instance->CR & RTC_CR_FMT) != (uint32_t)RESET) + { + assert_param(IS_RTC_HOUR12(sAlarm->AlarmTime.Hours)); + assert_param(IS_RTC_HOURFORMAT12(sAlarm->AlarmTime.TimeFormat)); + } + else + { + sAlarm->AlarmTime.TimeFormat = 0x00; + assert_param(IS_RTC_HOUR24(sAlarm->AlarmTime.Hours)); + } + assert_param(IS_RTC_MINUTES(sAlarm->AlarmTime.Minutes)); + assert_param(IS_RTC_SECONDS(sAlarm->AlarmTime.Seconds)); + + if(sAlarm->AlarmDateWeekDaySel == RTC_ALARMDATEWEEKDAYSEL_DATE) + { + assert_param(IS_RTC_ALARM_DATE_WEEKDAY_DATE(sAlarm->AlarmDateWeekDay)); + } + else + { + assert_param(IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(sAlarm->AlarmDateWeekDay)); + } + tmpreg = (((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Hours) << 16) | \ + ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Minutes) << 8) | \ + ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Seconds)) | \ + ((uint32_t)(sAlarm->AlarmTime.TimeFormat) << 16) | \ + ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmDateWeekDay) << 24) | \ + ((uint32_t)sAlarm->AlarmDateWeekDaySel) | \ + ((uint32_t)sAlarm->AlarmMask)); + } + else + { + if((hrtc->Instance->CR & RTC_CR_FMT) != (uint32_t)RESET) + { + tmpreg = RTC_Bcd2ToByte(sAlarm->AlarmTime.Hours); + assert_param(IS_RTC_HOUR12(tmpreg)); + assert_param(IS_RTC_HOURFORMAT12(sAlarm->AlarmTime.TimeFormat)); + } + else + { + sAlarm->AlarmTime.TimeFormat = 0x00; + assert_param(IS_RTC_HOUR24(RTC_Bcd2ToByte(sAlarm->AlarmTime.Hours))); + } + + assert_param(IS_RTC_MINUTES(RTC_Bcd2ToByte(sAlarm->AlarmTime.Minutes))); + assert_param(IS_RTC_SECONDS(RTC_Bcd2ToByte(sAlarm->AlarmTime.Seconds))); + + if(sAlarm->AlarmDateWeekDaySel == RTC_ALARMDATEWEEKDAYSEL_DATE) + { + tmpreg = RTC_Bcd2ToByte(sAlarm->AlarmDateWeekDay); + assert_param(IS_RTC_ALARM_DATE_WEEKDAY_DATE(tmpreg)); + } + else + { + tmpreg = RTC_Bcd2ToByte(sAlarm->AlarmDateWeekDay); + assert_param(IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(tmpreg)); + } + tmpreg = (((uint32_t)(sAlarm->AlarmTime.Hours) << 16) | \ + ((uint32_t)(sAlarm->AlarmTime.Minutes) << 8) | \ + ((uint32_t) sAlarm->AlarmTime.Seconds) | \ + ((uint32_t)(sAlarm->AlarmTime.TimeFormat) << 16) | \ + ((uint32_t)(sAlarm->AlarmDateWeekDay) << 24) | \ + ((uint32_t)sAlarm->AlarmDateWeekDaySel) | \ + ((uint32_t)sAlarm->AlarmMask)); + } +#if defined(STM32L100xBA) || defined (STM32L151xBA) || defined (STM32L152xBA) || defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) + /* Configure the Alarm A or Alarm B Sub Second registers */ + subsecondtmpreg = (uint32_t)((uint32_t)(sAlarm->AlarmTime.SubSeconds) | (uint32_t)(sAlarm->AlarmSubSecondMask)); +#endif /* STM32L100xBA || STM32L151xBA || STM32L152xBA || STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* Configure the Alarm register */ + if(sAlarm->Alarm == RTC_ALARM_A) + { + /* Disable the Alarm A interrupt */ + __HAL_RTC_ALARMA_DISABLE(hrtc); + + /* Clear flag alarm A */ + __HAL_RTC_ALARM_CLEAR_FLAG(hrtc, RTC_FLAG_ALRAF); + + tickstart = HAL_GetTick(); + /* Wait till RTC ALRAWF flag is set and if Time out is reached exit */ + while(__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRAWF) == RESET) + { + if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE) + { + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + hrtc->State = HAL_RTC_STATE_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_TIMEOUT; + } + } + + hrtc->Instance->ALRMAR = (uint32_t)tmpreg; +#if defined(STM32L100xBA) || defined (STM32L151xBA) || defined (STM32L152xBA) || defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) + /* Configure the Alarm A Sub Second register */ + hrtc->Instance->ALRMASSR = subsecondtmpreg; +#endif /* STM32L100xBA || STM32L151xBA || STM32L152xBA || STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ + /* Configure the Alarm state: Enable Alarm */ + __HAL_RTC_ALARMA_ENABLE(hrtc); + /* Configure the Alarm interrupt */ + __HAL_RTC_ALARM_ENABLE_IT(hrtc,RTC_IT_ALRA); + } + else + { + /* Disable the Alarm B interrupt */ + __HAL_RTC_ALARMB_DISABLE(hrtc); + + /* Clear flag alarm B */ + __HAL_RTC_ALARM_CLEAR_FLAG(hrtc, RTC_FLAG_ALRBF); + + tickstart = HAL_GetTick(); + /* Wait till RTC ALRBWF flag is set and if Time out is reached exit */ + while(__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRBWF) == RESET) + { + if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE) + { + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + hrtc->State = HAL_RTC_STATE_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_TIMEOUT; + } + } + + hrtc->Instance->ALRMBR = (uint32_t)tmpreg; +#if defined(STM32L100xBA) || defined (STM32L151xBA) || defined (STM32L152xBA) || defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) + /* Configure the Alarm B Sub Second register */ + hrtc->Instance->ALRMBSSR = subsecondtmpreg; +#endif /* STM32L100xBA || STM32L151xBA || STM32L152xBA || STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ + /* Configure the Alarm state: Enable Alarm */ + __HAL_RTC_ALARMB_ENABLE(hrtc); + /* Configure the Alarm interrupt */ + __HAL_RTC_ALARM_ENABLE_IT(hrtc, RTC_IT_ALRB); + } + + /* RTC Alarm Interrupt Configuration: EXTI configuration */ + __HAL_RTC_ALARM_EXTI_ENABLE_IT(); + + __HAL_RTC_ALARM_EXTI_ENABLE_RISING_EDGE(); + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Gets the RTC Alarm value and masks. + * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @param sAlarm: Pointer to Date structure + * @param Alarm: Specifies the Alarm. + * This parameter can be one of the following values: + * @arg RTC_ALARM_A: AlarmA + * @arg RTC_ALARM_B: AlarmB + * @param Format: Specifies the format of the entered parameters. + * This parameter can be one of the following values: + * @arg RTC_FORMAT_BIN: Binary data format + * @arg RTC_FORMAT_BCD: BCD data format + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTC_GetAlarm(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Alarm, uint32_t Format) +{ + uint32_t tmpreg = 0; +#if defined(STM32L100xBA) || defined (STM32L151xBA) || defined (STM32L152xBA) || defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) + uint32_t subsecondtmpreg = 0; +#endif /* STM32L100xBA || STM32L151xBA || STM32L152xBA || STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ + + /* Check the parameters */ + assert_param(IS_RTC_FORMAT(Format)); + assert_param(IS_RTC_ALARM(Alarm)); + + if(Alarm == RTC_ALARM_A) + { + /* AlarmA */ + sAlarm->Alarm = RTC_ALARM_A; + + tmpreg = (uint32_t)(hrtc->Instance->ALRMAR); +#if defined(STM32L100xBA) || defined (STM32L151xBA) || defined (STM32L152xBA) || defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) + subsecondtmpreg = (uint32_t)((hrtc->Instance->ALRMASSR) & RTC_ALRMASSR_SS); +#endif /* STM32L100xBA || STM32L151xBA || STM32L152xBA || STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ + } + else + { + sAlarm->Alarm = RTC_ALARM_B; + + tmpreg = (uint32_t)(hrtc->Instance->ALRMBR); +#if defined(STM32L100xBA) || defined (STM32L151xBA) || defined (STM32L152xBA) || defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) + subsecondtmpreg = (uint32_t)((hrtc->Instance->ALRMBSSR) & RTC_ALRMBSSR_SS); +#endif /* STM32L100xBA || STM32L151xBA || STM32L152xBA || STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ + } + + /* Fill the structure with the read parameters */ + sAlarm->AlarmTime.Hours = (uint32_t)((tmpreg & (RTC_ALRMAR_HT | RTC_ALRMAR_HU)) >> 16); + sAlarm->AlarmTime.Minutes = (uint32_t)((tmpreg & (RTC_ALRMAR_MNT | RTC_ALRMAR_MNU)) >> 8); + sAlarm->AlarmTime.Seconds = (uint32_t)(tmpreg & (RTC_ALRMAR_ST | RTC_ALRMAR_SU)); + sAlarm->AlarmTime.TimeFormat = (uint32_t)((tmpreg & RTC_ALRMAR_PM) >> 16); +#if defined(STM32L100xBA) || defined (STM32L151xBA) || defined (STM32L152xBA) || defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) + sAlarm->AlarmTime.SubSeconds = (uint32_t) subsecondtmpreg; +#endif /* STM32L100xBA || STM32L151xBA || STM32L152xBA || STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ + sAlarm->AlarmDateWeekDay = (uint32_t)((tmpreg & (RTC_ALRMAR_DT | RTC_ALRMAR_DU)) >> 24); + sAlarm->AlarmDateWeekDaySel = (uint32_t)(tmpreg & RTC_ALRMAR_WDSEL); + sAlarm->AlarmMask = (uint32_t)(tmpreg & RTC_ALARMMASK_ALL); + + if(Format == RTC_FORMAT_BIN) + { + sAlarm->AlarmTime.Hours = RTC_Bcd2ToByte(sAlarm->AlarmTime.Hours); + sAlarm->AlarmTime.Minutes = RTC_Bcd2ToByte(sAlarm->AlarmTime.Minutes); + sAlarm->AlarmTime.Seconds = RTC_Bcd2ToByte(sAlarm->AlarmTime.Seconds); + sAlarm->AlarmDateWeekDay = RTC_Bcd2ToByte(sAlarm->AlarmDateWeekDay); + } + + return HAL_OK; +} + +/** + * @} + */ + + +/** @defgroup RTC_Exported_Functions_Group6 Peripheral Control functions + * @brief Peripheral Control functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides functions allowing to + (+) Wait for RTC Time and Date Synchronization + +@endverbatim + * @{ + */ + +/** + * @brief Waits until the RTC Time and Date registers (RTC_TR and RTC_DR) are + * synchronized with RTC APB clock. + * @note The RTC Resynchronization mode is write protected, use the + * __HAL_RTC_WRITEPROTECTION_DISABLE() before calling this function. + * @note To read the calendar through the shadow registers after Calendar + * initialization, calendar update or after wakeup from low power modes + * the software must first clear the RSF flag. + * The software must then wait until it is set again before reading + * the calendar, which means that the calendar registers have been + * correctly copied into the RTC_TR and RTC_DR shadow registers. + * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTC_WaitForSynchro(RTC_HandleTypeDef* hrtc) +{ + uint32_t tickstart = 0; + +#if defined(STM32L100xBA) || defined (STM32L151xBA) || defined (STM32L152xBA) || defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) + /* If RTC_CR_BYPSHAD bit = 0, wait for synchro else this check is not needed */ + if((hrtc->Instance->CR & RTC_CR_BYPSHAD) == RESET) +#endif /* STM32L100xBA || STM32L151xBA || STM32L152xBA || STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ + { + /* Clear RSF flag */ + hrtc->Instance->ISR &= (uint32_t)RTC_RSF_MASK; + + tickstart = HAL_GetTick(); + + /* Wait the registers to be synchronised */ + while((hrtc->Instance->ISR & RTC_ISR_RSF) == (uint32_t)RESET) + { + if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + + return HAL_OK; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup RTCEx RTCEx + * @brief RTC Extended HAL module driver + * @{ + */ + +/** @defgroup RTCEx_Exported_Functions RTCEx Exported Functions + * @{ + */ + +/** @defgroup RTCEx_Exported_Functions_Group4 RTC TimeStamp and Tamper functions + * @brief RTC TimeStamp and Tamper functions + * +@verbatim + =============================================================================== + ##### RTC TimeStamp and Tamper functions ##### + =============================================================================== + + [..] This section provides functions allowing to configure TimeStamp feature + +@endverbatim + * @{ + */ + +/** + * @brief Sets TimeStamp. + * @note This API must be called before enabling the TimeStamp feature. + * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @param TimeStampEdge: Specifies the pin edge on which the TimeStamp is + * activated. + * This parameter can be one of the following values: + * @arg RTC_TIMESTAMPEDGE_RISING: the Time stamp event occurs on the + * rising edge of the related pin. + * @arg RTC_TIMESTAMPEDGE_FALLING: the Time stamp event occurs on the + * falling edge of the related pin. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_TIMESTAMP_EDGE(TimeStampEdge)); + + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Get the RTC_CR register and clear the bits to be configured */ + tmpreg = (uint32_t)(hrtc->Instance->CR & (uint32_t)~(RTC_CR_TSEDGE | RTC_CR_TSE)); + + tmpreg|= TimeStampEdge; + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* Configure the Time Stamp TSEDGE and Enable bits */ + hrtc->Instance->CR = (uint32_t)tmpreg; + + __HAL_RTC_TIMESTAMP_ENABLE(hrtc); + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Sets TimeStamp with Interrupt. + * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @note This API must be called before enabling the TimeStamp feature. + * @param TimeStampEdge: Specifies the pin edge on which the TimeStamp is + * activated. + * This parameter can be one of the following values: + * @arg RTC_TIMESTAMPEDGE_RISING: the Time stamp event occurs on the + * rising edge of the related pin. + * @arg RTC_TIMESTAMPEDGE_FALLING: the Time stamp event occurs on the + * falling edge of the related pin. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp_IT(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_TIMESTAMP_EDGE(TimeStampEdge)); + + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Get the RTC_CR register and clear the bits to be configured */ + tmpreg = (uint32_t)(hrtc->Instance->CR & (uint32_t)~(RTC_CR_TSEDGE | RTC_CR_TSE)); + + tmpreg |= TimeStampEdge; + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* Configure the Time Stamp TSEDGE and Enable bits */ + hrtc->Instance->CR = (uint32_t)tmpreg; + + __HAL_RTC_TIMESTAMP_ENABLE(hrtc); + + /* Enable IT timestamp */ + __HAL_RTC_TIMESTAMP_ENABLE_IT(hrtc,RTC_IT_TS); + + /* RTC timestamp Interrupt Configuration: EXTI configuration */ + __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT(); + + __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_EDGE(); + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Deactivates TimeStamp. + * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_DeactivateTimeStamp(RTC_HandleTypeDef *hrtc) +{ + uint32_t tmpreg = 0; + + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* In case of interrupt mode is used, the interrupt source must disabled */ + __HAL_RTC_TIMESTAMP_DISABLE_IT(hrtc, RTC_IT_TS); + + /* Get the RTC_CR register and clear the bits to be configured */ + tmpreg = (uint32_t)(hrtc->Instance->CR & (uint32_t)~(RTC_CR_TSEDGE | RTC_CR_TSE)); + + /* Configure the Time Stamp TSEDGE and Enable bits */ + hrtc->Instance->CR = (uint32_t)tmpreg; + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Gets the RTC TimeStamp value. + * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @param sTimeStamp: Pointer to Time structure + * @param sTimeStampDate: Pointer to Date structure + * @param Format: specifies the format of the entered parameters. + * This parameter can be one of the following values: + * RTC_FORMAT_BIN: Binary data format + * RTC_FORMAT_BCD: BCD data format + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_GetTimeStamp(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef* sTimeStamp, RTC_DateTypeDef* sTimeStampDate, uint32_t Format) +{ + uint32_t tmptime = 0, tmpdate = 0; + + /* Check the parameters */ + assert_param(IS_RTC_FORMAT(Format)); + + /* Get the TimeStamp time and date registers values */ + tmptime = (uint32_t)(hrtc->Instance->TSTR & RTC_TR_RESERVED_MASK); + tmpdate = (uint32_t)(hrtc->Instance->TSDR & RTC_DR_RESERVED_MASK); + + /* Fill the Time structure fields with the read parameters */ + sTimeStamp->Hours = (uint8_t)((tmptime & (RTC_TR_HT | RTC_TR_HU)) >> 16); + sTimeStamp->Minutes = (uint8_t)((tmptime & (RTC_TR_MNT | RTC_TR_MNU)) >> 8); + sTimeStamp->Seconds = (uint8_t)(tmptime & (RTC_TR_ST | RTC_TR_SU)); + sTimeStamp->TimeFormat = (uint8_t)((tmptime & (RTC_TR_PM)) >> 16); +#if defined(STM32L100xBA) || defined (STM32L151xBA) || defined (STM32L152xBA) || defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) + sTimeStamp->SubSeconds = (uint32_t)((hrtc->Instance->TSSSR) & RTC_TSSSR_SS); +#endif /* STM32L100xBA || STM32L151xBA || STM32L152xBA || STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ + + /* Fill the Date structure fields with the read parameters */ + sTimeStampDate->Year = 0; + sTimeStampDate->Month = (uint8_t)((tmpdate & (RTC_DR_MT | RTC_DR_MU)) >> 8); + sTimeStampDate->Date = (uint8_t)(tmpdate & (RTC_DR_DT | RTC_DR_DU)); + sTimeStampDate->WeekDay = (uint8_t)((tmpdate & (RTC_DR_WDU)) >> 13); + + /* Check the input parameters format */ + if(Format == RTC_FORMAT_BIN) + { + /* Convert the TimeStamp structure parameters to Binary format */ + sTimeStamp->Hours = (uint8_t)RTC_Bcd2ToByte(sTimeStamp->Hours); + sTimeStamp->Minutes = (uint8_t)RTC_Bcd2ToByte(sTimeStamp->Minutes); + sTimeStamp->Seconds = (uint8_t)RTC_Bcd2ToByte(sTimeStamp->Seconds); + + /* Convert the DateTimeStamp structure parameters to Binary format */ + sTimeStampDate->Month = (uint8_t)RTC_Bcd2ToByte(sTimeStampDate->Month); + sTimeStampDate->Date = (uint8_t)RTC_Bcd2ToByte(sTimeStampDate->Date); + sTimeStampDate->WeekDay = (uint8_t)RTC_Bcd2ToByte(sTimeStampDate->WeekDay); + } + + /* Clear the TIMESTAMP Flag */ + __HAL_RTC_TIMESTAMP_CLEAR_FLAG(hrtc, RTC_FLAG_TSF); + + return HAL_OK; +} + +/** + * @brief Sets Tamper + * @note By calling this API we disable the tamper interrupt for all tampers. + * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @param sTamper: Pointer to Tamper Structure. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_SetTamper(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef* sTamper) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_RTC_TAMPER(sTamper->Tamper)); + assert_param(IS_RTC_TAMPER_TRIGGER(sTamper->Trigger)); +#if defined(STM32L100xBA) || defined (STM32L151xBA) || defined (STM32L152xBA) || defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) + assert_param(IS_RTC_TAMPER_FILTER(sTamper->Filter)); + assert_param(IS_RTC_TAMPER_SAMPLING_FREQ(sTamper->SamplingFrequency)); + assert_param(IS_RTC_TAMPER_PRECHARGE_DURATION(sTamper->PrechargeDuration)); + assert_param(IS_RTC_TAMPER_PULLUP_STATE(sTamper->TamperPullUp)); + assert_param(IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION(sTamper->TimeStampOnTamperDetection)); +#endif /* STM32L100xBA || STM32L151xBA || STM32L152xBA || STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ + + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + +#if defined(STM32L100xBA) || defined (STM32L151xBA) || defined (STM32L152xBA) || defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) + if((sTamper->Trigger == RTC_TAMPERTRIGGER_RISINGEDGE)) + { + /* Configure the RTC_TAFCR register */ + sTamper->Trigger = RTC_TAMPERTRIGGER_RISINGEDGE; + } + else + { + sTamper->Trigger = (uint32_t)(sTamper->Tamper << 1); + } + + tmpreg = ((uint32_t)sTamper->Tamper | (uint32_t)sTamper->Trigger | (uint32_t)sTamper->Filter |\ + (uint32_t)sTamper->SamplingFrequency | (uint32_t)sTamper->PrechargeDuration |\ + (uint32_t)sTamper->TamperPullUp | sTamper->TimeStampOnTamperDetection); + + hrtc->Instance->TAFCR &= (uint32_t)~((uint32_t)sTamper->Tamper | (uint32_t)(sTamper->Tamper << 1) | (uint32_t)RTC_TAFCR_TAMPTS |\ + (uint32_t)RTC_TAFCR_TAMPFREQ | (uint32_t)RTC_TAFCR_TAMPFLT | (uint32_t)RTC_TAFCR_TAMPPRCH |\ + (uint32_t)RTC_TAFCR_TAMPPUDIS | (uint32_t)RTC_TAFCR_TAMPIE); +#else + tmpreg = ((uint32_t)sTamper->Tamper | (uint32_t)(sTamper->Trigger)); + + hrtc->Instance->TAFCR &= (uint32_t)~((uint32_t)RTC_TAFCR_TAMP1E | (uint32_t)RTC_TAFCR_TAMP1TRG); + +#endif /* STM32L100xBA || STM32L151xBA || STM32L152xBA || STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ + hrtc->Instance->TAFCR |= tmpreg; + + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Sets Tamper with interrupt. + * @note By calling this API we force the tamper interrupt for all tampers. + * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @param sTamper: Pointer to RTC Tamper. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_SetTamper_IT(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef* sTamper) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_RTC_TAMPER(sTamper->Tamper)); + assert_param(IS_RTC_TAMPER_TRIGGER(sTamper->Trigger)); +#if defined(STM32L100xBA) || defined (STM32L151xBA) || defined (STM32L152xBA) || defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) + assert_param(IS_RTC_TAMPER_FILTER(sTamper->Filter)); + assert_param(IS_RTC_TAMPER_SAMPLING_FREQ(sTamper->SamplingFrequency)); + assert_param(IS_RTC_TAMPER_PRECHARGE_DURATION(sTamper->PrechargeDuration)); + assert_param(IS_RTC_TAMPER_PULLUP_STATE(sTamper->TamperPullUp)); + assert_param(IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION(sTamper->TimeStampOnTamperDetection)); +#endif /* STM32L100xBA || STM32L151xBA || STM32L152xBA || STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ + + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + +#if defined(STM32L100xBA) || defined (STM32L151xBA) || defined (STM32L152xBA) || defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) + /* Configure the tamper trigger */ + if((sTamper->Trigger == RTC_TAMPERTRIGGER_RISINGEDGE)) + { + sTamper->Trigger = RTC_TAMPERTRIGGER_RISINGEDGE; + } + else + { + sTamper->Trigger = (uint32_t) (sTamper->Tamper<<1); + } + + tmpreg = ((uint32_t)sTamper->Tamper | (uint32_t)sTamper->Trigger | (uint32_t)sTamper->Filter |\ + (uint32_t)sTamper->SamplingFrequency | (uint32_t)sTamper->PrechargeDuration |\ + (uint32_t)sTamper->TamperPullUp | sTamper->TimeStampOnTamperDetection); + + hrtc->Instance->TAFCR &= (uint32_t)~((uint32_t)sTamper->Tamper | (uint32_t)(sTamper->Tamper << 1) | (uint32_t)RTC_TAFCR_TAMPTS |\ + (uint32_t)RTC_TAFCR_TAMPFREQ | (uint32_t)RTC_TAFCR_TAMPFLT | (uint32_t)RTC_TAFCR_TAMPPRCH |\ + (uint32_t)RTC_TAFCR_TAMPPUDIS); +#else + tmpreg = ((uint32_t)sTamper->Tamper | (uint32_t)sTamper->Trigger); + + hrtc->Instance->TAFCR &= (uint32_t)~((uint32_t)RTC_TAFCR_TAMP1E | (uint32_t)RTC_TAFCR_TAMP1TRG | (uint32_t)RTC_TAFCR_TAMPIE); +#endif /* STM32L100xBA || STM32L151xBA || STM32L152xBA || STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ + hrtc->Instance->TAFCR |= tmpreg; + + /* Configure the Tamper Interrupt in the RTC_TAFCR */ + hrtc->Instance->TAFCR |= (uint32_t)RTC_TAFCR_TAMPIE; + + /* RTC Tamper Interrupt Configuration: EXTI configuration */ + __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT(); + + __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_EDGE(); + + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Deactivates Tamper. + * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @param Tamper: Selected tamper pin. + * This parameter can be a value of @ref RTCEx_Tamper_Pins_Definitions + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_DeactivateTamper(RTC_HandleTypeDef *hrtc, uint32_t Tamper) +{ + assert_param(IS_RTC_TAMPER(Tamper)); + + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Disable the selected Tamper pin */ + hrtc->Instance->TAFCR &= (uint32_t)~Tamper; + + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief This function handles TimeStamp interrupt request. + * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @retval None + */ +void HAL_RTCEx_TamperTimeStampIRQHandler(RTC_HandleTypeDef *hrtc) +{ + /* Get the TimeStamp interrupt source enable status */ + if(__HAL_RTC_TIMESTAMP_GET_IT_SOURCE(hrtc, RTC_IT_TS) != RESET) + { + /* Get the pending status of the TIMESTAMP Interrupt */ + if(__HAL_RTC_TIMESTAMP_GET_FLAG(hrtc, RTC_FLAG_TSF) != RESET) + { + /* TIMESTAMP callback */ + HAL_RTCEx_TimeStampEventCallback(hrtc); + + /* Clear the TIMESTAMP interrupt pending bit */ + __HAL_RTC_TIMESTAMP_CLEAR_FLAG(hrtc, RTC_FLAG_TSF); + } + } + + /* Get the Tamper1 interrupts source enable status */ + if(__HAL_RTC_TAMPER_GET_IT_SOURCE(hrtc, RTC_IT_TAMP | RTC_IT_TAMP1) != RESET) + { + /* Get the pending status of the Tamper1 Interrupt */ + if(__HAL_RTC_TAMPER_GET_FLAG(hrtc, RTC_FLAG_TAMP1F) != RESET) + { + /* Tamper1 callback */ + HAL_RTCEx_Tamper1EventCallback(hrtc); + + /* Clear the Tamper1 interrupt pending bit */ + __HAL_RTC_TAMPER_CLEAR_FLAG(hrtc, RTC_FLAG_TAMP1F); + } + } + +#if defined(STM32L100xBA) || defined (STM32L151xBA) || defined (STM32L152xBA) || defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) + /* Get the Tamper2 interrupts source enable status */ + if(__HAL_RTC_TAMPER_GET_IT_SOURCE(hrtc, RTC_IT_TAMP | RTC_IT_TAMP2) != RESET) + { + /* Get the pending status of the Tamper2 Interrupt */ + if(__HAL_RTC_TAMPER_GET_FLAG(hrtc, RTC_FLAG_TAMP2F) != RESET) + { + /* Tamper2 callback */ + HAL_RTCEx_Tamper2EventCallback(hrtc); + + /* Clear the Tamper2 interrupt pending bit */ + __HAL_RTC_TAMPER_CLEAR_FLAG(hrtc, RTC_FLAG_TAMP2F); + } + } + + /* Get the Tamper3 interrupts source enable status */ + if(__HAL_RTC_TAMPER_GET_IT_SOURCE(hrtc, RTC_IT_TAMP | RTC_IT_TAMP3) != RESET) + { + /* Get the pending status of the Tamper3 Interrupt */ + if(__HAL_RTC_TAMPER_GET_FLAG(hrtc, RTC_FLAG_TAMP3F) != RESET) + { + /* Tamper3 callback */ + HAL_RTCEx_Tamper3EventCallback(hrtc); + + /* Clear the Tamper3 interrupt pending bit */ + __HAL_RTC_TAMPER_CLEAR_FLAG(hrtc, RTC_FLAG_TAMP3F); + } + } +#endif /* STM32L100xBA || STM32L151xBA || STM32L152xBA || STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ + + /* Clear the EXTI's Flag for RTC TimeStamp and Tamper */ + __HAL_RTC_TAMPER_TIMESTAMP_EXTI_CLEAR_FLAG(); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; +} + +/** + * @brief TimeStamp callback. + * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @retval None + */ +__weak void HAL_RTCEx_TimeStampEventCallback(RTC_HandleTypeDef *hrtc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_RTCEx_TimeStampEventCallback could be implemented in the user file + */ +} + +/** + * @brief Tamper 1 callback. + * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @retval None + */ +__weak void HAL_RTCEx_Tamper1EventCallback(RTC_HandleTypeDef *hrtc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_RTCEx_Tamper1EventCallback could be implemented in the user file + */ +} + +#if defined(STM32L100xBA) || defined (STM32L151xBA) || defined (STM32L152xBA) || defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) +/** + * @brief Tamper 2 callback. + * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @retval None + */ +__weak void HAL_RTCEx_Tamper2EventCallback(RTC_HandleTypeDef *hrtc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_RTCEx_Tamper2EventCallback could be implemented in the user file + */ +} + +/** + * @brief Tamper 3 callback. + * @param hrtc: RTC handle + * @retval None + */ +__weak void HAL_RTCEx_Tamper3EventCallback(RTC_HandleTypeDef *hrtc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_RTCEx_Tamper3EventCallback could be implemented in the user file + */ +} +#endif /* STM32L100xBA || STM32L151xBA || STM32L152xBA || STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ + +/** + * @brief This function handles TimeStamp polling request. + * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @param Timeout: Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_PollForTimeStampEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout) +{ + uint32_t tickstart = HAL_GetTick(); + + while(__HAL_RTC_TIMESTAMP_GET_FLAG(hrtc, RTC_FLAG_TSF) == RESET) + { + if(__HAL_RTC_TIMESTAMP_GET_FLAG(hrtc, RTC_FLAG_TSOVF) != RESET) + { + /* Clear the TIMESTAMP OverRun Flag */ + __HAL_RTC_TIMESTAMP_CLEAR_FLAG(hrtc, RTC_FLAG_TSOVF); + + /* Change TIMESTAMP state */ + hrtc->State = HAL_RTC_STATE_ERROR; + + return HAL_ERROR; + } + + if(Timeout != HAL_MAX_DELAY) + { + if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout)) + { + hrtc->State = HAL_RTC_STATE_TIMEOUT; + return HAL_TIMEOUT; + } + } + } + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; + + return HAL_OK; +} + +/** + * @brief This function handles Tamper1 Polling. + * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @param Timeout: Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_PollForTamper1Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout) +{ + uint32_t tickstart = HAL_GetTick(); + + /* Get the status of the Interrupt */ + while(__HAL_RTC_TAMPER_GET_FLAG(hrtc,RTC_FLAG_TAMP1F)== RESET) + { + if(Timeout != HAL_MAX_DELAY) + { + if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout)) + { + hrtc->State = HAL_RTC_STATE_TIMEOUT; + return HAL_TIMEOUT; + } + } + } + + /* Clear the Tamper Flag */ + __HAL_RTC_TAMPER_CLEAR_FLAG(hrtc,RTC_FLAG_TAMP1F); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; + + return HAL_OK; +} + +#if defined(STM32L100xBA) || defined (STM32L151xBA) || defined (STM32L152xBA) || defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) +/** + * @brief This function handles Tamper2 Polling. + * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @param Timeout: Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_PollForTamper2Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout) +{ + uint32_t tickstart = HAL_GetTick(); + + /* Get the status of the Interrupt */ + while(__HAL_RTC_TAMPER_GET_FLAG(hrtc,RTC_FLAG_TAMP2F) == RESET) + { + if(Timeout != HAL_MAX_DELAY) + { + if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout)) + { + hrtc->State = HAL_RTC_STATE_TIMEOUT; + return HAL_TIMEOUT; + } + } + } + + /* Clear the Tamper Flag */ + __HAL_RTC_TAMPER_CLEAR_FLAG(hrtc,RTC_FLAG_TAMP2F); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; + + return HAL_OK; +} + +/** + * @brief This function handles Tamper3 Polling. + * @param hrtc: RTC handle + * @param Timeout: Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_PollForTamper3Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout) +{ + uint32_t tickstart = HAL_GetTick(); + + /* Get the status of the Interrupt */ + while(__HAL_RTC_TAMPER_GET_FLAG(hrtc,RTC_FLAG_TAMP3F) == RESET) + { + if(Timeout != HAL_MAX_DELAY) + { + if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout)) + { + hrtc->State = HAL_RTC_STATE_TIMEOUT; + return HAL_TIMEOUT; + } + } + } + + /* Clear the Tamper Flag */ + __HAL_RTC_TAMPER_CLEAR_FLAG(hrtc,RTC_FLAG_TAMP3F); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; + + return HAL_OK; +} +#endif /* STM32L100xBA || STM32L151xBA || STM32L152xBA || STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ + +/** + * @} + */ + +/** @defgroup RTCEx_Exported_Functions_Group5 RTC Wake-up functions + * @brief RTC Wake-up functions + * +@verbatim + =============================================================================== + ##### RTC Wake-up functions ##### + =============================================================================== + + [..] This section provides functions allowing to configure Wake-up feature + +@endverbatim + * @{ + */ + +/** + * @brief Set wake up timer. + * @param hrtc: RTC handle + * @param WakeUpCounter: Wake up counter + * @param WakeUpClock: Wake up clock + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock) +{ + uint32_t tickstart = 0; + + /* Check the parameters */ + assert_param(IS_RTC_WAKEUP_CLOCK(WakeUpClock)); + assert_param(IS_RTC_WAKEUP_COUNTER(WakeUpCounter)); + + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /*Check RTC WUTWF flag is reset only when wake up timer enabled*/ + if((hrtc->Instance->CR & RTC_CR_WUTE) != RESET){ + tickstart = HAL_GetTick(); + + /* Wait till RTC WUTWF flag is reset and if Time out is reached exit */ + while(__HAL_RTC_WAKEUPTIMER_GET_FLAG(hrtc, RTC_FLAG_WUTWF) == SET) + { + if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE) + { + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + hrtc->State = HAL_RTC_STATE_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_TIMEOUT; + } + } + } + + __HAL_RTC_WAKEUPTIMER_DISABLE(hrtc); + + tickstart = HAL_GetTick(); + + /* Wait till RTC WUTWF flag is set and if Time out is reached exit */ + while(__HAL_RTC_WAKEUPTIMER_GET_FLAG(hrtc, RTC_FLAG_WUTWF) == RESET) + { + if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE) + { + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + hrtc->State = HAL_RTC_STATE_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_TIMEOUT; + } + } + + /* Clear the Wakeup Timer clock source bits in CR register */ + hrtc->Instance->CR &= (uint32_t)~RTC_CR_WUCKSEL; + + /* Configure the clock source */ + hrtc->Instance->CR |= (uint32_t)WakeUpClock; + + /* Configure the Wakeup Timer counter */ + hrtc->Instance->WUTR = (uint32_t)WakeUpCounter; + + /* Enable the Wakeup Timer */ + __HAL_RTC_WAKEUPTIMER_ENABLE(hrtc); + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Set wake up timer with interrupt. + * @param hrtc: RTC handle + * @param WakeUpCounter: Wake up counter + * @param WakeUpClock: Wake up clock + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer_IT(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock) +{ + uint32_t tickstart = 0; + + /* Check the parameters */ + assert_param(IS_RTC_WAKEUP_CLOCK(WakeUpClock)); + assert_param(IS_RTC_WAKEUP_COUNTER(WakeUpCounter)); + + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /*Check RTC WUTWF flag is reset only when wake up timer enabled*/ + if((hrtc->Instance->CR & RTC_CR_WUTE) != RESET){ + tickstart = HAL_GetTick(); + + /* Wait till RTC WUTWF flag is reset and if Time out is reached exit */ + while(__HAL_RTC_WAKEUPTIMER_GET_FLAG(hrtc, RTC_FLAG_WUTWF) == SET) + { + if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE) + { + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + hrtc->State = HAL_RTC_STATE_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_TIMEOUT; + } + } + } + + /* Disable the Wake-Up timer */ + __HAL_RTC_WAKEUPTIMER_DISABLE(hrtc); + + /* Clear flag Wake-Up */ + __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(hrtc, RTC_FLAG_WUTF); + + tickstart = HAL_GetTick(); + + /* Wait till RTC WUTWF flag is set and if Time out is reached exit */ + while(__HAL_RTC_WAKEUPTIMER_GET_FLAG(hrtc, RTC_FLAG_WUTWF) == RESET) + { + if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE) + { + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + hrtc->State = HAL_RTC_STATE_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_TIMEOUT; + } + } + + /* Configure the Wakeup Timer counter */ + hrtc->Instance->WUTR = (uint32_t)WakeUpCounter; + + /* Clear the Wakeup Timer clock source bits in CR register */ + hrtc->Instance->CR &= (uint32_t)~RTC_CR_WUCKSEL; + + /* Configure the clock source */ + hrtc->Instance->CR |= (uint32_t)WakeUpClock; + + /* RTC WakeUpTimer Interrupt Configuration: EXTI configuration */ + __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT(); + + __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE(); + + /* Configure the Interrupt in the RTC_CR register */ + __HAL_RTC_WAKEUPTIMER_ENABLE_IT(hrtc,RTC_IT_WUT); + + /* Enable the Wakeup Timer */ + __HAL_RTC_WAKEUPTIMER_ENABLE(hrtc); + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Deactivates wake up timer counter. + * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @retval HAL status + */ +uint32_t HAL_RTCEx_DeactivateWakeUpTimer(RTC_HandleTypeDef *hrtc) +{ + uint32_t tickstart = 0; + + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* Disable the Wakeup Timer */ + __HAL_RTC_WAKEUPTIMER_DISABLE(hrtc); + + /* In case of interrupt mode is used, the interrupt source must disabled */ + __HAL_RTC_WAKEUPTIMER_DISABLE_IT(hrtc,RTC_IT_WUT); + + tickstart = HAL_GetTick(); + /* Wait till RTC WUTWF flag is set and if Time out is reached exit */ + while(__HAL_RTC_WAKEUPTIMER_GET_FLAG(hrtc, RTC_FLAG_WUTWF) == RESET) + { + if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE) + { + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + hrtc->State = HAL_RTC_STATE_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_TIMEOUT; + } + } + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Gets wake up timer counter. + * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @retval Counter value + */ +uint32_t HAL_RTCEx_GetWakeUpTimer(RTC_HandleTypeDef *hrtc) +{ + /* Get the counter value */ + return ((uint32_t)(hrtc->Instance->WUTR & RTC_WUTR_WUT)); +} + +/** + * @brief This function handles Wake Up Timer interrupt request. + * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @retval None + */ +void HAL_RTCEx_WakeUpTimerIRQHandler(RTC_HandleTypeDef *hrtc) +{ + /* Get the pending status of the WAKEUPTIMER Interrupt */ + if(__HAL_RTC_WAKEUPTIMER_GET_FLAG(hrtc, RTC_FLAG_WUTF) != RESET) + { + /* WAKEUPTIMER callback */ + HAL_RTCEx_WakeUpTimerEventCallback(hrtc); + + /* Clear the WAKEUPTIMER interrupt pending bit */ + __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(hrtc, RTC_FLAG_WUTF); + } + + + /* Clear the EXTI's line Flag for RTC WakeUpTimer */ + __HAL_RTC_WAKEUPTIMER_EXTI_CLEAR_FLAG(); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; +} + +/** + * @brief Wake Up Timer callback. + * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @retval None + */ +__weak void HAL_RTCEx_WakeUpTimerEventCallback(RTC_HandleTypeDef *hrtc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_RTCEx_WakeUpTimerEventCallback could be implemented in the user file + */ +} + +/** + * @brief This function handles Wake Up Timer Polling. + * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @param Timeout: Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_PollForWakeUpTimerEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout) +{ + uint32_t tickstart = HAL_GetTick(); + + while(__HAL_RTC_WAKEUPTIMER_GET_FLAG(hrtc, RTC_FLAG_WUTF) == RESET) + { + if(Timeout != HAL_MAX_DELAY) + { + if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout)) + { + hrtc->State = HAL_RTC_STATE_TIMEOUT; + + return HAL_TIMEOUT; + } + } + } + + /* Clear the WAKEUPTIMER Flag */ + __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(hrtc, RTC_FLAG_WUTF); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; + + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup RTCEx_Exported_Functions_Group7 Extended Peripheral Control functions + * @brief Extended Peripheral Control functions + * +@verbatim + =============================================================================== + ##### Extension Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides functions allowing to + (+) Writes a data in a specified RTC Backup data register + (+) Read a data in a specified RTC Backup data register + (+) Sets the Coarse calibration parameters. + (+) Deactivates the Coarse calibration parameters + (+) Sets the Smooth calibration parameters. + (+) Configures the Synchronization Shift Control Settings. + (+) Configures the Calibration Pinout (RTC_CALIB) Selection (1Hz or 512Hz). + (+) Deactivates the Calibration Pinout (RTC_CALIB) Selection (1Hz or 512Hz). + (+) Enables the RTC reference clock detection. + (+) Disable the RTC reference clock detection. + (+) Enables the Bypass Shadow feature. + (+) Disables the Bypass Shadow feature. + +@endverbatim + * @{ + */ + +/** + * @brief Writes a data in a specified RTC Backup data register. + * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @param BackupRegister: RTC Backup data Register number. + * This parameter can be: RTC_BKP_DRx where x can be from 0 to 19 to + * specify the register. + * @param Data: Data to be written in the specified RTC Backup data register. + * @retval None + */ +void HAL_RTCEx_BKUPWrite(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister, uint32_t Data) +{ + uint32_t tmp = 0; + + /* Check the parameters */ + assert_param(IS_RTC_BKP(BackupRegister)); + + tmp = (uint32_t)&(hrtc->Instance->BKP0R); + tmp += (BackupRegister * 4); + + /* Write the specified register */ + *(__IO uint32_t *)tmp = (uint32_t)Data; +} + +/** + * @brief Reads data from the specified RTC Backup data Register. + * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @param BackupRegister: RTC Backup data Register number. + * This parameter can be: RTC_BKP_DRx where x can be from 0 to 19 to + * specify the register. + * @retval Read value + */ +uint32_t HAL_RTCEx_BKUPRead(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister) +{ + uint32_t tmp = 0; + + /* Check the parameters */ + assert_param(IS_RTC_BKP(BackupRegister)); + + tmp = (uint32_t)&(hrtc->Instance->BKP0R); + tmp += (BackupRegister * 4); + + /* Read the specified register */ + return (*(__IO uint32_t *)tmp); +} + +/** + * @brief Sets the Coarse calibration parameters. + * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @param CalibSign: Specifies the sign of the coarse calibration value. + * This parameter can be one of the following values : + * @arg RTC_CALIBSIGN_POSITIVE: The value sign is positive + * @arg RTC_CALIBSIGN_NEGATIVE: The value sign is negative + * @param Value: value of coarse calibration expressed in ppm (coded on 5 bits). + * + * @note This Calibration value should be between 0 and 63 when using negative + * sign with a 2-ppm step. + * + * @note This Calibration value should be between 0 and 126 when using positive + * sign with a 4-ppm step. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_SetCoarseCalib(RTC_HandleTypeDef* hrtc, uint32_t CalibSign, uint32_t Value) +{ + /* Check the parameters */ + assert_param(IS_RTC_CALIB_SIGN(CalibSign)); + assert_param(IS_RTC_CALIB_VALUE(Value)); + + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* Set Initialization mode */ + if(RTC_EnterInitMode(hrtc) != HAL_OK) + { + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + /* Set RTC state*/ + hrtc->State = HAL_RTC_STATE_ERROR; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_ERROR; + } + else + { + /* Enable the Coarse Calibration */ + __HAL_RTC_COARSE_CALIB_ENABLE(hrtc); + + /* Set the coarse calibration value */ + hrtc->Instance->CALIBR = (uint32_t)(CalibSign|Value); + + /* Exit Initialization mode */ + hrtc->Instance->ISR &= (uint32_t)~RTC_ISR_INIT; + } + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + /* Change state */ + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Deactivates the Coarse calibration parameters. + * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_DeactivateCoarseCalib(RTC_HandleTypeDef* hrtc) +{ + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* Set Initialization mode */ + if(RTC_EnterInitMode(hrtc) != HAL_OK) + { + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + /* Set RTC state*/ + hrtc->State = HAL_RTC_STATE_ERROR; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_ERROR; + } + else + { + /* Enable the Coarse Calibration */ + __HAL_RTC_COARSE_CALIB_DISABLE(hrtc); + + /* Exit Initialization mode */ + hrtc->Instance->ISR &= (uint32_t)~RTC_ISR_INIT; + } + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + /* Change state */ + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +#if defined(STM32L100xBA) || defined (STM32L151xBA) || defined (STM32L152xBA) || defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) +/** + * @brief Sets the Smooth calibration parameters. + * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @param SmoothCalibPeriod: Select the Smooth Calibration Period. + * This parameter can be can be one of the following values : + * @arg RTC_SMOOTHCALIB_PERIOD_32SEC: The smooth calibration periode is 32s. + * @arg RTC_SMOOTHCALIB_PERIOD_16SEC: The smooth calibration periode is 16s. + * @arg RTC_SMOOTHCALIB_PERIOD_8SEC: The smooth calibartion periode is 8s. + * @param SmoothCalibPlusPulses: Select to Set or reset the CALP bit. + * This parameter can be one of the following values: + * @arg RTC_SMOOTHCALIB_PLUSPULSES_SET: Add one RTCCLK puls every 2*11 pulses. + * @arg RTC_SMOOTHCALIB_PLUSPULSES_RESET: No RTCCLK pulses are added. + * @param SmoothCalibMinusPulsesValue: Select the value of CALM[8:0] bits. + * This parameter can be one any value from 0 to 0x000001FF. + * @note To deactivate the smooth calibration, the field SmoothCalibPlusPulses + * must be equal to SMOOTHCALIB_PLUSPULSES_RESET and the field + * SmoothCalibMinusPulsesValue mut be equal to 0. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_SetSmoothCalib(RTC_HandleTypeDef* hrtc, uint32_t SmoothCalibPeriod, uint32_t SmoothCalibPlusPulses, uint32_t SmoothCalibMinusPulsesValue) +{ + uint32_t tickstart = 0; + + /* Check the parameters */ + assert_param(IS_RTC_SMOOTH_CALIB_PERIOD(SmoothCalibPeriod)); + assert_param(IS_RTC_SMOOTH_CALIB_PLUS(SmoothCalibPlusPulses)); + assert_param(IS_RTC_SMOOTH_CALIB_MINUS(SmoothCalibMinusPulsesValue)); + + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* check if a calibration is pending*/ + if((hrtc->Instance->ISR & RTC_ISR_RECALPF) != RESET) + { + tickstart = HAL_GetTick(); + + /* check if a calibration is pending*/ + while((hrtc->Instance->ISR & RTC_ISR_RECALPF) != RESET) + { + if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE) + { + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_TIMEOUT; + } + } + } + + /* Configure the Smooth calibration settings */ + hrtc->Instance->CALR = (uint32_t)((uint32_t)SmoothCalibPeriod | (uint32_t)SmoothCalibPlusPulses | (uint32_t)SmoothCalibMinusPulsesValue); + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Configures the Synchronization Shift Control Settings. + * @note When REFCKON is set, firmware must not write to Shift control register. + * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @param ShiftAdd1S: Select to add or not 1 second to the time calendar. + * This parameter can be one of the following values : + * @arg RTC_SHIFTADD1S_SET: Add one second to the clock calendar. + * @arg RTC_SHIFTADD1S_RESET: No effect. + * @param ShiftSubFS: Select the number of Second Fractions to substitute. + * This parameter can be one any value from 0 to 0x7FFF. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_SetSynchroShift(RTC_HandleTypeDef* hrtc, uint32_t ShiftAdd1S, uint32_t ShiftSubFS) +{ + uint32_t tickstart = 0; + + /* Check the parameters */ + assert_param(IS_RTC_SHIFT_ADD1S(ShiftAdd1S)); + assert_param(IS_RTC_SHIFT_SUBFS(ShiftSubFS)); + + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + tickstart = HAL_GetTick(); + + /* Wait until the shift is completed*/ + while((hrtc->Instance->ISR & RTC_ISR_SHPF) != RESET) + { + if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE) + { + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + hrtc->State = HAL_RTC_STATE_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_TIMEOUT; + } + } + + /* Check if the reference clock detection is disabled */ + if((hrtc->Instance->CR & RTC_CR_REFCKON) == RESET) + { + /* Configure the Shift settings */ + hrtc->Instance->SHIFTR = (uint32_t)(uint32_t)(ShiftSubFS) | (uint32_t)(ShiftAdd1S); + + /* Wait for synchro */ + if(HAL_RTC_WaitForSynchro(hrtc) != HAL_OK) + { + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + hrtc->State = HAL_RTC_STATE_ERROR; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_ERROR; + } + } + else + { + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_ERROR; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_ERROR; + } + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} +#endif /* STM32L100xBA || STM32L151xBA || STM32L152xBA || STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ + + +#if defined(STM32L100xBA) || defined (STM32L151xBA) || defined (STM32L152xBA) || defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) +/** + * @brief Configures the Calibration Pinout (RTC_CALIB) Selection (1Hz or 512Hz). + * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @param CalibOutput : Select the Calibration output Selection . + * This parameter can be one of the following values: + * @arg RTC_CALIBOUTPUT_512HZ: A signal has a regular waveform at 512Hz. + * @arg RTC_CALIBOUTPUT_1HZ: A signal has a regular waveform at 1Hz. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_SetCalibrationOutPut(RTC_HandleTypeDef* hrtc, uint32_t CalibOutput) +#else +/** + * @brief Configure the Calibration Pinout (RTC_CALIB). + * @param hrtc : RTC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_SetCalibrationOutPut(RTC_HandleTypeDef* hrtc) +#endif /* STM32L100xBA || STM32L151xBA || STM32L152xBA || STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ +{ +#if defined(STM32L100xBA) || defined (STM32L151xBA) || defined (STM32L152xBA) || defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) + /* Check the parameters */ + assert_param(IS_RTC_CALIB_OUTPUT(CalibOutput)); +#endif /* STM32L100xBA || STM32L151xBA || STM32L152xBA || STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ + + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + +#if defined(STM32L100xBA) || defined (STM32L151xBA) || defined (STM32L152xBA) || defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) + /* Clear flags before config */ + hrtc->Instance->CR &= (uint32_t)~RTC_CR_COSEL; + + /* Configure the RTC_CR register */ + hrtc->Instance->CR |= (uint32_t)CalibOutput; +#endif /* STM32L100xBA || STM32L151xBA || STM32L152xBA || STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ + + __HAL_RTC_CALIBRATION_OUTPUT_ENABLE(hrtc); + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Deactivates the Calibration Pinout (RTC_CALIB) Selection (1Hz or 512Hz). + * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_DeactivateCalibrationOutPut(RTC_HandleTypeDef* hrtc) +{ + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + __HAL_RTC_CALIBRATION_OUTPUT_DISABLE(hrtc); + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Enables the RTC reference clock detection. + * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_SetRefClock(RTC_HandleTypeDef* hrtc) +{ + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* Set Initialization mode */ + if(RTC_EnterInitMode(hrtc) != HAL_OK) + { + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + /* Set RTC state*/ + hrtc->State = HAL_RTC_STATE_ERROR; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_ERROR; + } + else + { + __HAL_RTC_CLOCKREF_DETECTION_ENABLE(hrtc); + + /* Exit Initialization mode */ + hrtc->Instance->ISR &= (uint32_t)~RTC_ISR_INIT; + } + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Disable the RTC reference clock detection. + * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_DeactivateRefClock(RTC_HandleTypeDef* hrtc) +{ + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* Set Initialization mode */ + if(RTC_EnterInitMode(hrtc) != HAL_OK) + { + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + /* Set RTC state*/ + hrtc->State = HAL_RTC_STATE_ERROR; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_ERROR; + } + else + { + __HAL_RTC_CLOCKREF_DETECTION_DISABLE(hrtc); + + /* Exit Initialization mode */ + hrtc->Instance->ISR &= (uint32_t)~RTC_ISR_INIT; + } + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +#if defined(STM32L100xBA) || defined (STM32L151xBA) || defined (STM32L152xBA) || defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) +/** + * @brief Enables the Bypass Shadow feature. + * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @note When the Bypass Shadow is enabled the calendar value are taken + * directly from the Calendar counter. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_EnableBypassShadow(RTC_HandleTypeDef* hrtc) +{ + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* Set the BYPSHAD bit */ + hrtc->Instance->CR |= (uint8_t)RTC_CR_BYPSHAD; + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Disables the Bypass Shadow feature. + * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @note When the Bypass Shadow is enabled the calendar value are taken + * directly from the Calendar counter. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_DisableBypassShadow(RTC_HandleTypeDef* hrtc) +{ + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* Reset the BYPSHAD bit */ + hrtc->Instance->CR &= (uint8_t)~RTC_CR_BYPSHAD; + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} +#endif /* STM32L100xBA || STM32L151xBA || STM32L152xBA || STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */ + +/** + * @} + */ + +/** @defgroup RTCEx_Exported_Functions_Group8 Extended features functions + * @brief Extended features functions + * +@verbatim + =============================================================================== + ##### Extended features functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) RTC Alram B callback + (+) RTC Poll for Alarm B request + +@endverbatim + * @{ + */ + +/** + * @brief Alarm B callback. + * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @retval None + */ +__weak void HAL_RTCEx_AlarmBEventCallback(RTC_HandleTypeDef *hrtc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_RTCEx_AlarmBEventCallback could be implemented in the user file + */ +} + +/** + * @brief This function handles AlarmB Polling request. + * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @param Timeout: Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_PollForAlarmBEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout) +{ + uint32_t tickstart = HAL_GetTick(); + + while(__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRBF) == RESET) + { + if(Timeout != HAL_MAX_DELAY) + { + if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout)) + { + hrtc->State = HAL_RTC_STATE_TIMEOUT; + return HAL_TIMEOUT; + } + } + } + + /* Clear the Alarm Flag */ + __HAL_RTC_ALARM_CLEAR_FLAG(hrtc, RTC_FLAG_ALRBF); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; + + return HAL_OK; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_RTC_MODULE_ENABLED */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_sd.c b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_sd.c new file mode 100755 index 0000000..6fc9e92 --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_sd.c @@ -0,0 +1,3472 @@ +/** + ****************************************************************************** + * @file stm32l1xx_hal_sd.c + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief SD card HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Secure Digital (SD) peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral Control functions + * + Peripheral State functions + * + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + This driver implements a high level communication layer for read and write from/to + this memory. The needed STM32 hardware resources (SDIO and GPIO) are performed by + the user in HAL_SD_MspInit() function (MSP layer). + Basically, the MSP layer configuration should be the same as we provide in the + examples. + You can easily tailor this configuration according to hardware resources. + + [..] + This driver is a generic layered driver for SDIO memories which uses the HAL + SDIO driver functions to interface with SD and uSD cards devices. + It is used as follows: + + (#)Initialize the SDIO low level resources by implement the HAL_SD_MspInit() API: + (##) Enable the SDIO interface clock using __HAL_RCC_SDIO_CLK_ENABLE(); + (##) SDIO pins configuration for SD card + (+++) Enable the clock for the SDIO GPIOs using the functions __HAL_RCC_GPIOx_CLK_ENABLE(); + (+++) Configure these SDIO pins as alternate function pull-up using HAL_GPIO_Init() + and according to your pin assignment; + (##) DMA Configuration if you need to use DMA process (HAL_SD_ReadBlocks_DMA() + and HAL_SD_WriteBlocks_DMA() APIs). + (+++) Enable the DMAx interface clock using __HAL_RCC_DMAx_CLK_ENABLE(); + (+++) Configure the DMA using the function HAL_DMA_Init() with predeclared and filled. + (##) NVIC configuration if you need to use interrupt process when using DMA transfer. + (+++) Configure the SDIO and DMA interrupt priorities using functions + HAL_NVIC_SetPriority(); DMA priority is superior to SDIO's priority + (+++) Enable the NVIC DMA and SDIO IRQs using function HAL_NVIC_EnableIRQ() + (+++) SDIO interrupts are managed using the macros __HAL_SD_SDIO_ENABLE_IT() + and __HAL_SD_SDIO_DISABLE_IT() inside the communication process. + (+++) SDIO interrupts pending bits are managed using the macros __HAL_SD_SDIO_GET_IT() + and __HAL_SD_SDIO_CLEAR_IT() + (#) At this stage, you can perform SD read/write/erase operations after SD card initialization + + + *** SD Card Initialization and configuration *** + ================================================ + [..] + To initialize the SD Card, use the HAL_SD_Init() function. It Initializes + the SD Card and put it into Standby State (Ready for data transfer). + This function provide the following operations: + + (#) Apply the SD Card initialization process at 400KHz and check the SD Card + type (Standard Capacity or High Capacity). You can change or adapt this + frequency by adjusting the "ClockDiv" field. + The SD Card frequency (SDIO_CK) is computed as follows: + + SDIO_CK = SDIOCLK / (ClockDiv + 2) + + In initialization mode and according to the SD Card standard, + make sure that the SDIO_CK frequency doesn't exceed 400KHz. + + (#) Get the SD CID and CSD data. All these information are managed by the SDCardInfo + structure. This structure provide also ready computed SD Card capacity + and Block size. + + -@- These information are stored in SD handle structure in case of future use. + + (#) Configure the SD Card Data transfer frequency. By Default, the card transfer + frequency is set to 48MHz / (SDIO_TRANSFER_CLK_DIV + 2) = 8MHz. You can change or adapt this frequency by adjusting + the "ClockDiv" field. + The SD Card frequency (SDIO_CK) is computed as follows: + + SDIO_CK = SDIOCLK / (ClockDiv + 2) + + In transfer mode and according to the SD Card standard, make sure that the + SDIO_CK frequency doesn't exceed 25MHz and 50MHz in High-speed mode switch. + To be able to use a frequency higher than 24MHz, you should use the SDIO + peripheral in bypass mode. Refer to the corresponding reference manual + for more details. + + (#) Select the corresponding SD Card according to the address read with the step 2. + + (#) Configure the SD Card in wide bus mode: 4-bits data. + + *** SD Card Read operation *** + ============================== + [..] + (+) You can read from SD card in polling mode by using function HAL_SD_ReadBlocks(). + This function support only 512-bytes block length (the block size should be + chosen as 512 bytes). + You can choose either one block read operation or multiple block read operation + by adjusting the "NumberOfBlocks" parameter. + + (+) You can read from SD card in DMA mode by using function HAL_SD_ReadBlocks_DMA(). + This function support only 512-bytes block length (the block size should be + chosen as 512 bytes). + You can choose either one block read operation or multiple block read operation + by adjusting the "NumberOfBlocks" parameter. + After this, you have to call the function HAL_SD_CheckReadOperation(), to insure + that the read transfer is done correctly in both DMA and SD sides. + + *** SD Card Write operation *** + =============================== + [..] + (+) You can write to SD card in polling mode by using function HAL_SD_WriteBlocks(). + This function support only 512-bytes block length (the block size should be + chosen as 512 bytes). + You can choose either one block read operation or multiple block read operation + by adjusting the "NumberOfBlocks" parameter. + + (+) You can write to SD card in DMA mode by using function HAL_SD_WriteBlocks_DMA(). + This function support only 512-bytes block length (the block size should be + chosen as 512 byte). + You can choose either one block read operation or multiple block read operation + by adjusting the "NumberOfBlocks" parameter. + After this, you have to call the function HAL_SD_CheckWriteOperation(), to insure + that the write transfer is done correctly in both DMA and SD sides. + + *** SD card status *** + ====================== + [..] + (+) At any time, you can check the SD Card status and get the SD card state + by using the HAL_SD_GetStatus() function. This function checks first if the + SD card is still connected and then get the internal SD Card transfer state. + (+) You can also get the SD card SD Status register by using the HAL_SD_SendSDStatus() + function. + + *** SD HAL driver macros list *** + ================================== + [..] + Below the list of most used macros in SD HAL driver. + + (+) __HAL_SD_SDIO_ENABLE : Enable the SD device + (+) __HAL_SD_SDIO_DISABLE : Disable the SD device + (+) __HAL_SD_SDIO_DMA_ENABLE: Enable the SDIO DMA transfer + (+) __HAL_SD_SDIO_DMA_DISABLE: Disable the SDIO DMA transfer + (+) __HAL_SD_SDIO_ENABLE_IT: Enable the SD device interrupt + (+) __HAL_SD_SDIO_DISABLE_IT: Disable the SD device interrupt + (+) __HAL_SD_SDIO_GET_FLAG:Check whether the specified SD flag is set or not + (+) __HAL_SD_SDIO_CLEAR_FLAG: Clear the SD's pending flags + + (@) You can refer to the SD HAL driver header file for more useful macros + + @endverbatim + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_hal.h" + +#ifdef HAL_SD_MODULE_ENABLED + +/** @addtogroup STM32L1xx_HAL_Driver + * @{ + */ + +/** @addtogroup SD + * @{ + */ + +#if defined(STM32L151xD) || defined(STM32L152xD) || defined(STM32L162xD) + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @addtogroup SD_Private_Defines + * @{ + */ +/** + * @brief SDIO Data block size + */ +#define DATA_BLOCK_SIZE ((uint32_t)(9 << 4)) +/** + * @brief SDIO Static flags, Timeout, FIFO Address + */ +#define SDIO_STATIC_FLAGS ((uint32_t)(SDIO_FLAG_CCRCFAIL | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_CTIMEOUT |\ + SDIO_FLAG_DTIMEOUT | SDIO_FLAG_TXUNDERR | SDIO_FLAG_RXOVERR |\ + SDIO_FLAG_CMDREND | SDIO_FLAG_CMDSENT | SDIO_FLAG_DATAEND |\ + SDIO_FLAG_DBCKEND)) + +#define SDIO_CMD0TIMEOUT (0x00010000U) + +/** + * @brief Mask for errors Card Status R1 (OCR Register) + */ +#define SD_OCR_ADDR_OUT_OF_RANGE (0x80000000U) +#define SD_OCR_ADDR_MISALIGNED (0x40000000U) +#define SD_OCR_BLOCK_LEN_ERR (0x20000000U) +#define SD_OCR_ERASE_SEQ_ERR (0x10000000U) +#define SD_OCR_BAD_ERASE_PARAM (0x08000000U) +#define SD_OCR_WRITE_PROT_VIOLATION (0x04000000U) +#define SD_OCR_LOCK_UNLOCK_FAILED (0x01000000U) +#define SD_OCR_COM_CRC_FAILED (0x00800000U) +#define SD_OCR_ILLEGAL_CMD (0x00400000U) +#define SD_OCR_CARD_ECC_FAILED (0x00200000U) +#define SD_OCR_CC_ERROR (0x00100000U) +#define SD_OCR_GENERAL_UNKNOWN_ERROR (0x00080000U) +#define SD_OCR_STREAM_READ_UNDERRUN (0x00040000U) +#define SD_OCR_STREAM_WRITE_OVERRUN (0x00020000U) +#define SD_OCR_CID_CSD_OVERWRITE (0x00010000U) +#define SD_OCR_WP_ERASE_SKIP (0x00008000U) +#define SD_OCR_CARD_ECC_DISABLED (0x00004000U) +#define SD_OCR_ERASE_RESET (0x00002000U) +#define SD_OCR_AKE_SEQ_ERROR (0x00000008U) +#define SD_OCR_ERRORBITS (0xFDFFE008U) + +/** + * @brief Masks for R6 Response + */ +#define SD_R6_GENERAL_UNKNOWN_ERROR (0x00002000U) +#define SD_R6_ILLEGAL_CMD (0x00004000U) +#define SD_R6_COM_CRC_FAILED (0x00008000U) + +#define SD_VOLTAGE_WINDOW_SD (0x80100000U) +#define SD_HIGH_CAPACITY (0x40000000U) +#define SD_STD_CAPACITY (0x00000000U) +#define SD_CHECK_PATTERN (0x000001AAU) + +#define SD_MAX_VOLT_TRIAL (0x0000FFFFU) +#define SD_ALLZERO (0x00000000U) + +#define SD_WIDE_BUS_SUPPORT (0x00040000U) +#define SD_SINGLE_BUS_SUPPORT (0x00010000U) +#define SD_CARD_LOCKED (0x02000000U) + +#define SD_DATATIMEOUT (0xFFFFFFFFU) +#define SD_0TO7BITS (0x000000FFU) +#define SD_8TO15BITS (0x0000FF00U) +#define SD_16TO23BITS (0x00FF0000U) +#define SD_24TO31BITS (0xFF000000U) +#define SD_MAX_DATA_LENGTH (0x01FFFFFFU) + +#define SD_HALFFIFO (0x00000008U) +#define SD_HALFFIFOBYTES (0x00000020U) + +/** + * @brief Command Class Supported + */ +#define SD_CCCC_LOCK_UNLOCK (0x00000080U) +#define SD_CCCC_WRITE_PROT (0x00000040U) +#define SD_CCCC_ERASE (0x00000020U) + +/** + * @brief Following commands are SD Card Specific commands. + * SDIO_APP_CMD should be sent before sending these commands. + */ +#define SD_SDIO_SEND_IF_COND ((uint32_t)SD_CMD_HS_SEND_EXT_CSD) + +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @addtogroup SD_Private_Functions_Prototypes + * @{ + */ +static HAL_SD_ErrorTypedef SD_Initialize_Cards(SD_HandleTypeDef *hsd); +static HAL_SD_ErrorTypedef SD_Select_Deselect(SD_HandleTypeDef *hsd, uint64_t addr); +static HAL_SD_ErrorTypedef SD_PowerON(SD_HandleTypeDef *hsd); +static HAL_SD_ErrorTypedef SD_PowerOFF(SD_HandleTypeDef *hsd); +static HAL_SD_ErrorTypedef SD_SendStatus(SD_HandleTypeDef *hsd, uint32_t *pCardStatus); +static HAL_SD_CardStateTypedef SD_GetState(SD_HandleTypeDef *hsd); +static HAL_SD_ErrorTypedef SD_IsCardProgramming(SD_HandleTypeDef *hsd, uint8_t *pStatus); +static HAL_SD_ErrorTypedef SD_CmdError(SD_HandleTypeDef *hsd); +static HAL_SD_ErrorTypedef SD_CmdResp1Error(SD_HandleTypeDef *hsd, uint8_t SD_CMD); +static HAL_SD_ErrorTypedef SD_CmdResp7Error(SD_HandleTypeDef *hsd); +static HAL_SD_ErrorTypedef SD_CmdResp3Error(SD_HandleTypeDef *hsd); +static HAL_SD_ErrorTypedef SD_CmdResp2Error(SD_HandleTypeDef *hsd); +static HAL_SD_ErrorTypedef SD_CmdResp6Error(SD_HandleTypeDef *hsd, uint8_t SD_CMD, uint16_t *pRCA); +static HAL_SD_ErrorTypedef SD_WideBus_Enable(SD_HandleTypeDef *hsd); +static HAL_SD_ErrorTypedef SD_WideBus_Disable(SD_HandleTypeDef *hsd); +static HAL_SD_ErrorTypedef SD_FindSCR(SD_HandleTypeDef *hsd, uint32_t *pSCR); +static void SD_DMA_RxCplt(DMA_HandleTypeDef *hdma); +static void SD_DMA_RxError(DMA_HandleTypeDef *hdma); +static void SD_DMA_TxCplt(DMA_HandleTypeDef *hdma); +static void SD_DMA_TxError(DMA_HandleTypeDef *hdma); +/** + * @} + */ +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup SD_Exported_Functions + * @{ + */ + +/** @addtogroup SD_Exported_Functions_Group1 + * @brief Initialization and de-initialization functions + * +@verbatim + ============================================================================== + ##### Initialization and de-initialization functions ##### + ============================================================================== + [..] + This section provides functions allowing to initialize/de-initialize the SD + card device to be ready for use. + + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the SD card according to the specified parameters in the + SD_HandleTypeDef and create the associated handle. + * @param hsd: SD handle + * @param SDCardInfo: HAL_SD_CardInfoTypedef structure for SD card information + * @retval HAL SD error state + */ +HAL_SD_ErrorTypedef HAL_SD_Init(SD_HandleTypeDef *hsd, HAL_SD_CardInfoTypedef *SDCardInfo) +{ + __IO HAL_SD_ErrorTypedef errorstate = SD_OK; + SD_InitTypeDef tmpinit; + + /* Initialize the low level hardware (MSP) */ + HAL_SD_MspInit(hsd); + + /* Default SDIO peripheral configuration for SD card initialization */ + tmpinit.ClockEdge = SDIO_CLOCK_EDGE_RISING; + tmpinit.ClockBypass = SDIO_CLOCK_BYPASS_DISABLE; + tmpinit.ClockPowerSave = SDIO_CLOCK_POWER_SAVE_DISABLE; + tmpinit.BusWide = SDIO_BUS_WIDE_1B; + tmpinit.HardwareFlowControl = SDIO_HARDWARE_FLOW_CONTROL_DISABLE; + tmpinit.ClockDiv = SDIO_INIT_CLK_DIV; + + /* Initialize SDIO peripheral interface with default configuration */ + SDIO_Init(hsd->Instance, tmpinit); + + /* Identify card operating voltage */ + errorstate = SD_PowerON(hsd); + + if(errorstate != SD_OK) + { + return errorstate; + } + + /* Initialize the present SDIO card(s) and put them in idle state */ + errorstate = SD_Initialize_Cards(hsd); + + if (errorstate != SD_OK) + { + return errorstate; + } + + /* Read CSD/CID MSD registers */ + errorstate = HAL_SD_Get_CardInfo(hsd, SDCardInfo); + + if (errorstate == SD_OK) + { + /* Select the Card */ + errorstate = SD_Select_Deselect(hsd, (uint32_t)(((uint32_t)SDCardInfo->RCA) << 16)); + } + + /* Configure SDIO peripheral interface */ + SDIO_Init(hsd->Instance, hsd->Init); + + return errorstate; +} + +/** + * @brief De-Initializes the SD card. + * @param hsd: SD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SD_DeInit(SD_HandleTypeDef *hsd) +{ + + /* Set SD power state to off */ + SD_PowerOFF(hsd); + + /* De-Initialize the MSP layer */ + HAL_SD_MspDeInit(hsd); + + return HAL_OK; +} + + +/** + * @brief Initializes the SD MSP. + * @param hsd: SD handle + * @retval None + */ +__weak void HAL_SD_MspInit(SD_HandleTypeDef *hsd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsd); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_SD_MspInit could be implemented in the user file + */ +} + +/** + * @brief De-Initialize SD MSP. + * @param hsd: SD handle + * @retval None + */ +__weak void HAL_SD_MspDeInit(SD_HandleTypeDef *hsd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsd); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_SD_MspDeInit could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @addtogroup SD_Exported_Functions_Group2 + * @brief Data transfer functions + * +@verbatim + ============================================================================== + ##### IO operation functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to manage the data + transfer from/to SD card. + +@endverbatim + * @{ + */ + +/** + * @brief Reads block(s) from a specified address in a card. The Data transfer + * is managed by polling mode. + * @param hsd: SD handle + * @param pReadBuffer: pointer to the buffer that will contain the received data + * @param ReadAddr: Address from where data is to be read + * @param BlockSize: SD card Data block size + * @note BlockSize must be 512 bytes. + * @param NumberOfBlocks: Number of SD blocks to read + * @retval SD Card error state + */ +HAL_SD_ErrorTypedef HAL_SD_ReadBlocks(SD_HandleTypeDef *hsd, uint32_t *pReadBuffer, uint64_t ReadAddr, uint32_t BlockSize, uint32_t NumberOfBlocks) +{ + SDIO_CmdInitTypeDef sdio_cmdinitstructure; + SDIO_DataInitTypeDef sdio_datainitstructure; + HAL_SD_ErrorTypedef errorstate = SD_OK; + uint32_t count = 0, *tempbuff = (uint32_t *)pReadBuffer; + + /* Initialize data control register */ + hsd->Instance->DCTRL = 0; + + if (hsd->CardType == HIGH_CAPACITY_SD_CARD) + { + BlockSize = 512; + ReadAddr /= 512; + } + + /* Set Block Size for Card */ + sdio_cmdinitstructure.Argument = (uint32_t) BlockSize; + sdio_cmdinitstructure.CmdIndex = SD_CMD_SET_BLOCKLEN; + sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT; + sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO; + sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE; + SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure); + + /* Check for error conditions */ + errorstate = SD_CmdResp1Error(hsd, SD_CMD_SET_BLOCKLEN); + + if (errorstate != SD_OK) + { + return errorstate; + } + + /* Configure the SD DPSM (Data Path State Machine) */ + sdio_datainitstructure.DataTimeOut = SD_DATATIMEOUT; + sdio_datainitstructure.DataLength = NumberOfBlocks * BlockSize; + sdio_datainitstructure.DataBlockSize = DATA_BLOCK_SIZE; + sdio_datainitstructure.TransferDir = SDIO_TRANSFER_DIR_TO_SDIO; + sdio_datainitstructure.TransferMode = SDIO_TRANSFER_MODE_BLOCK; + sdio_datainitstructure.DPSM = SDIO_DPSM_ENABLE; + SDIO_DataConfig(hsd->Instance, &sdio_datainitstructure); + + if(NumberOfBlocks > 1) + { + /* Send CMD18 READ_MULT_BLOCK with argument data address */ + sdio_cmdinitstructure.CmdIndex = SD_CMD_READ_MULT_BLOCK; + } + else + { + /* Send CMD17 READ_SINGLE_BLOCK */ + sdio_cmdinitstructure.CmdIndex = SD_CMD_READ_SINGLE_BLOCK; + } + + sdio_cmdinitstructure.Argument = (uint32_t)ReadAddr; + SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure); + + /* Read block(s) in polling mode */ + if(NumberOfBlocks > 1) + { + /* Check for error conditions */ + errorstate = SD_CmdResp1Error(hsd, SD_CMD_READ_MULT_BLOCK); + + if (errorstate != SD_OK) + { + return errorstate; + } + + /* Poll on SDIO flags */ + while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXOVERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DATAEND | SDIO_FLAG_STBITERR)) + { + if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXFIFOHF)) + { + /* Read data from SDIO Rx FIFO */ + for (count = 0; count < 8; count++) + { + *(tempbuff + count) = SDIO_ReadFIFO(hsd->Instance); + } + + tempbuff += 8; + } + } + } + else + { + /* Check for error conditions */ + errorstate = SD_CmdResp1Error(hsd, SD_CMD_READ_SINGLE_BLOCK); + + if (errorstate != SD_OK) + { + return errorstate; + } + + /* In case of single block transfer, no need of stop transfer at all */ + while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXOVERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DBCKEND | SDIO_FLAG_STBITERR)) + { + if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXFIFOHF)) + { + /* Read data from SDIO Rx FIFO */ + for (count = 0; count < 8; count++) + { + *(tempbuff + count) = SDIO_ReadFIFO(hsd->Instance); + } + + tempbuff += 8; + } + } + } + + /* Send stop transmission command in case of multiblock read */ + if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_DATAEND) && (NumberOfBlocks > 1)) + { + if ((hsd->CardType == STD_CAPACITY_SD_CARD_V1_1) ||\ + (hsd->CardType == STD_CAPACITY_SD_CARD_V2_0) ||\ + (hsd->CardType == HIGH_CAPACITY_SD_CARD)) + { + /* Send stop transmission command */ + errorstate = HAL_SD_StopTransfer(hsd); + } + } + + /* Get error state */ + if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_DTIMEOUT)) + { + __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_DTIMEOUT); + + errorstate = SD_DATA_TIMEOUT; + + return errorstate; + } + else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_DCRCFAIL)) + { + __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_DCRCFAIL); + + errorstate = SD_DATA_CRC_FAIL; + + return errorstate; + } + else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXOVERR)) + { + __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_RXOVERR); + + errorstate = SD_RX_OVERRUN; + + return errorstate; + } + else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_STBITERR)) + { + __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_STBITERR); + + errorstate = SD_START_BIT_ERR; + + return errorstate; + } + else + { + /* No error flag set */ + } + + count = SD_DATATIMEOUT; + + /* Empty FIFO if there is still any data */ + while ((__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXDAVL)) && (count > 0)) + { + *tempbuff = SDIO_ReadFIFO(hsd->Instance); + tempbuff++; + count--; + } + + /* Clear all the static flags */ + __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS); + + return errorstate; +} + +/** + * @brief Allows to write block(s) to a specified address in a card. The Data + * transfer is managed by polling mode. + * @param hsd: SD handle + * @param pWriteBuffer: pointer to the buffer that will contain the data to transmit + * @param WriteAddr: Address from where data is to be written + * @param BlockSize: SD card Data block size + * @note BlockSize must be 512 bytes. + * @param NumberOfBlocks: Number of SD blocks to write + * @retval SD Card error state + */ +HAL_SD_ErrorTypedef HAL_SD_WriteBlocks(SD_HandleTypeDef *hsd, uint32_t *pWriteBuffer, uint64_t WriteAddr, uint32_t BlockSize, uint32_t NumberOfBlocks) +{ + SDIO_CmdInitTypeDef sdio_cmdinitstructure; + SDIO_DataInitTypeDef sdio_datainitstructure; + HAL_SD_ErrorTypedef errorstate = SD_OK; + uint32_t totalnumberofbytes = 0, bytestransferred = 0, count = 0, restwords = 0; + uint32_t *tempbuff = (uint32_t *)pWriteBuffer; + uint8_t cardstate = 0; + + /* Initialize data control register */ + hsd->Instance->DCTRL = 0; + + if (hsd->CardType == HIGH_CAPACITY_SD_CARD) + { + BlockSize = 512; + WriteAddr /= 512; + } + + /* Set Block Size for Card */ + sdio_cmdinitstructure.Argument = (uint32_t)BlockSize; + sdio_cmdinitstructure.CmdIndex = SD_CMD_SET_BLOCKLEN; + sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT; + sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO; + sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE; + SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure); + + /* Check for error conditions */ + errorstate = SD_CmdResp1Error(hsd, SD_CMD_SET_BLOCKLEN); + + if (errorstate != SD_OK) + { + return errorstate; + } + + if(NumberOfBlocks > 1) + { + /* Send CMD25 WRITE_MULT_BLOCK with argument data address */ + sdio_cmdinitstructure.CmdIndex = SD_CMD_WRITE_MULT_BLOCK; + } + else + { + /* Send CMD24 WRITE_SINGLE_BLOCK */ + sdio_cmdinitstructure.CmdIndex = SD_CMD_WRITE_SINGLE_BLOCK; + } + + sdio_cmdinitstructure.Argument = (uint32_t)WriteAddr; + SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure); + + /* Check for error conditions */ + if(NumberOfBlocks > 1) + { + errorstate = SD_CmdResp1Error(hsd, SD_CMD_WRITE_MULT_BLOCK); + } + else + { + errorstate = SD_CmdResp1Error(hsd, SD_CMD_WRITE_SINGLE_BLOCK); + } + + if (errorstate != SD_OK) + { + return errorstate; + } + + /* Set total number of bytes to write */ + totalnumberofbytes = NumberOfBlocks * BlockSize; + + /* Configure the SD DPSM (Data Path State Machine) */ + sdio_datainitstructure.DataTimeOut = SD_DATATIMEOUT; + sdio_datainitstructure.DataLength = NumberOfBlocks * BlockSize; + sdio_datainitstructure.DataBlockSize = SDIO_DATABLOCK_SIZE_512B; + sdio_datainitstructure.TransferDir = SDIO_TRANSFER_DIR_TO_CARD; + sdio_datainitstructure.TransferMode = SDIO_TRANSFER_MODE_BLOCK; + sdio_datainitstructure.DPSM = SDIO_DPSM_ENABLE; + SDIO_DataConfig(hsd->Instance, &sdio_datainitstructure); + + /* Write block(s) in polling mode */ + if(NumberOfBlocks > 1) + { + while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_TXUNDERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DATAEND | SDIO_FLAG_STBITERR)) + { + if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_TXFIFOHE)) + { + if ((totalnumberofbytes - bytestransferred) < 32) + { + restwords = ((totalnumberofbytes - bytestransferred) % 4 == 0) ? ((totalnumberofbytes - bytestransferred) / 4) : (( totalnumberofbytes - bytestransferred) / 4 + 1); + + /* Write data to SDIO Tx FIFO */ + for (count = 0; count < restwords; count++) + { + SDIO_WriteFIFO(hsd->Instance, tempbuff); + tempbuff++; + bytestransferred += 4; + } + } + else + { + /* Write data to SDIO Tx FIFO */ + for (count = 0; count < 8; count++) + { + SDIO_WriteFIFO(hsd->Instance, (tempbuff + count)); + } + + tempbuff += 8; + bytestransferred += 32; + } + } + } + } + else + { + /* In case of single data block transfer no need of stop command at all */ + while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_TXUNDERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DBCKEND | SDIO_FLAG_STBITERR)) + { + if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_TXFIFOHE)) + { + if ((totalnumberofbytes - bytestransferred) < 32) + { + restwords = ((totalnumberofbytes - bytestransferred) % 4 == 0) ? ((totalnumberofbytes - bytestransferred) / 4) : (( totalnumberofbytes - bytestransferred) / 4 + 1); + + /* Write data to SDIO Tx FIFO */ + for (count = 0; count < restwords; count++) + { + SDIO_WriteFIFO(hsd->Instance, tempbuff); + tempbuff++; + bytestransferred += 4; + } + } + else + { + /* Write data to SDIO Tx FIFO */ + for (count = 0; count < 8; count++) + { + SDIO_WriteFIFO(hsd->Instance, (tempbuff + count)); + } + + tempbuff += 8; + bytestransferred += 32; + } + } + } + } + + /* Send stop transmission command in case of multiblock write */ + if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_DATAEND) && (NumberOfBlocks > 1)) + { + if ((hsd->CardType == STD_CAPACITY_SD_CARD_V1_1) || (hsd->CardType == STD_CAPACITY_SD_CARD_V2_0) ||\ + (hsd->CardType == HIGH_CAPACITY_SD_CARD)) + { + /* Send stop transmission command */ + errorstate = HAL_SD_StopTransfer(hsd); + } + } + + /* Get error state */ + if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_DTIMEOUT)) + { + __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_DTIMEOUT); + + errorstate = SD_DATA_TIMEOUT; + + return errorstate; + } + else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_DCRCFAIL)) + { + __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_DCRCFAIL); + + errorstate = SD_DATA_CRC_FAIL; + + return errorstate; + } + else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_TXUNDERR)) + { + __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_TXUNDERR); + + errorstate = SD_TX_UNDERRUN; + + return errorstate; + } + else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_STBITERR)) + { + __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_STBITERR); + + errorstate = SD_START_BIT_ERR; + + return errorstate; + } + else + { + /* No error flag set */ + } + + /* Clear all the static flags */ + __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS); + + /* Wait till the card is in programming state */ + errorstate = SD_IsCardProgramming(hsd, &cardstate); + + while ((errorstate == SD_OK) && ((cardstate == SD_CARD_PROGRAMMING) || (cardstate == SD_CARD_RECEIVING))) + { + errorstate = SD_IsCardProgramming(hsd, &cardstate); + } + + return errorstate; +} + +/** + * @brief Reads block(s) from a specified address in a card. The Data transfer + * is managed by DMA mode. + * @note This API should be followed by the function HAL_SD_CheckReadOperation() + * to check the completion of the read process + * @param hsd: SD handle + * @param pReadBuffer: Pointer to the buffer that will contain the received data + * @param ReadAddr: Address from where data is to be read + * @param BlockSize: SD card Data block size + * @note BlockSize must be 512 bytes. + * @param NumberOfBlocks: Number of blocks to read. + * @retval SD Card error state + */ +HAL_SD_ErrorTypedef HAL_SD_ReadBlocks_DMA(SD_HandleTypeDef *hsd, uint32_t *pReadBuffer, uint64_t ReadAddr, uint32_t BlockSize, uint32_t NumberOfBlocks) +{ + SDIO_CmdInitTypeDef sdio_cmdinitstructure; + SDIO_DataInitTypeDef sdio_datainitstructure; + HAL_SD_ErrorTypedef errorstate = SD_OK; + + /* Initialize data control register */ + hsd->Instance->DCTRL = 0; + + /* Initialize handle flags */ + hsd->SdTransferCplt = 0; + hsd->DmaTransferCplt = 0; + hsd->SdTransferErr = SD_OK; + + /* Initialize SD Read operation */ + if(NumberOfBlocks > 1) + { + hsd->SdOperation = SD_READ_MULTIPLE_BLOCK; + } + else + { + hsd->SdOperation = SD_READ_SINGLE_BLOCK; + } + + /* Enable transfer interrupts */ + __HAL_SD_SDIO_ENABLE_IT(hsd, (SDIO_IT_DCRCFAIL |\ + SDIO_IT_DTIMEOUT |\ + SDIO_IT_DATAEND |\ + SDIO_IT_RXOVERR |\ + SDIO_IT_STBITERR)); + + /* Enable SDIO DMA transfer */ + __HAL_SD_SDIO_DMA_ENABLE(); + + /* Configure DMA user callbacks */ + hsd->hdmarx->XferCpltCallback = SD_DMA_RxCplt; + hsd->hdmarx->XferErrorCallback = SD_DMA_RxError; + + /* Enable the DMA Stream */ + HAL_DMA_Start_IT(hsd->hdmarx, (uint32_t)&hsd->Instance->FIFO, (uint32_t)pReadBuffer, (uint32_t)(BlockSize * NumberOfBlocks)/4); + + if (hsd->CardType == HIGH_CAPACITY_SD_CARD) + { + BlockSize = 512; + ReadAddr /= 512; + } + + /* Set Block Size for Card */ + sdio_cmdinitstructure.Argument = (uint32_t)BlockSize; + sdio_cmdinitstructure.CmdIndex = SD_CMD_SET_BLOCKLEN; + sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT; + sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO; + sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE; + SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure); + + /* Check for error conditions */ + errorstate = SD_CmdResp1Error(hsd, SD_CMD_SET_BLOCKLEN); + + if (errorstate != SD_OK) + { + return errorstate; + } + + /* Configure the SD DPSM (Data Path State Machine) */ + sdio_datainitstructure.DataTimeOut = SD_DATATIMEOUT; + sdio_datainitstructure.DataLength = BlockSize * NumberOfBlocks; + sdio_datainitstructure.DataBlockSize = SDIO_DATABLOCK_SIZE_512B; + sdio_datainitstructure.TransferDir = SDIO_TRANSFER_DIR_TO_SDIO; + sdio_datainitstructure.TransferMode = SDIO_TRANSFER_MODE_BLOCK; + sdio_datainitstructure.DPSM = SDIO_DPSM_ENABLE; + SDIO_DataConfig(hsd->Instance, &sdio_datainitstructure); + + /* Check number of blocks command */ + if(NumberOfBlocks > 1) + { + /* Send CMD18 READ_MULT_BLOCK with argument data address */ + sdio_cmdinitstructure.CmdIndex = SD_CMD_READ_MULT_BLOCK; + } + else + { + /* Send CMD17 READ_SINGLE_BLOCK */ + sdio_cmdinitstructure.CmdIndex = SD_CMD_READ_SINGLE_BLOCK; + } + + sdio_cmdinitstructure.Argument = (uint32_t)ReadAddr; + SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure); + + /* Check for error conditions */ + if(NumberOfBlocks > 1) + { + errorstate = SD_CmdResp1Error(hsd, SD_CMD_READ_MULT_BLOCK); + } + else + { + errorstate = SD_CmdResp1Error(hsd, SD_CMD_READ_SINGLE_BLOCK); + } + + /* Update the SD transfer error in SD handle */ + hsd->SdTransferErr = errorstate; + + return errorstate; +} + + +/** + * @brief Writes block(s) to a specified address in a card. The Data transfer + * is managed by DMA mode. + * @note This API should be followed by the function HAL_SD_CheckWriteOperation() + * to check the completion of the write process (by SD current status polling). + * @param hsd: SD handle + * @param pWriteBuffer: pointer to the buffer that will contain the data to transmit + * @param WriteAddr: Address from where data is to be read + * @param BlockSize: the SD card Data block size + * @note BlockSize must be 512 bytes. + * @param NumberOfBlocks: Number of blocks to write + * @retval SD Card error state + */ +HAL_SD_ErrorTypedef HAL_SD_WriteBlocks_DMA(SD_HandleTypeDef *hsd, uint32_t *pWriteBuffer, uint64_t WriteAddr, uint32_t BlockSize, uint32_t NumberOfBlocks) +{ + SDIO_CmdInitTypeDef sdio_cmdinitstructure; + SDIO_DataInitTypeDef sdio_datainitstructure; + HAL_SD_ErrorTypedef errorstate = SD_OK; + + /* Initialize data control register */ + hsd->Instance->DCTRL = 0; + + /* Initialize handle flags */ + hsd->SdTransferCplt = 0; + hsd->DmaTransferCplt = 0; + hsd->SdTransferErr = SD_OK; + + /* Initialize SD Write operation */ + if(NumberOfBlocks > 1) + { + hsd->SdOperation = SD_WRITE_MULTIPLE_BLOCK; + } + else + { + hsd->SdOperation = SD_WRITE_SINGLE_BLOCK; + } + + /* Enable transfer interrupts */ + __HAL_SD_SDIO_ENABLE_IT(hsd, (SDIO_IT_DCRCFAIL |\ + SDIO_IT_DTIMEOUT |\ + SDIO_IT_DATAEND |\ + SDIO_IT_TXUNDERR |\ + SDIO_IT_STBITERR)); + + /* Configure DMA user callbacks */ + hsd->hdmatx->XferCpltCallback = SD_DMA_TxCplt; + hsd->hdmatx->XferErrorCallback = SD_DMA_TxError; + + /* Enable the DMA Stream */ + HAL_DMA_Start_IT(hsd->hdmatx, (uint32_t)pWriteBuffer, (uint32_t)&hsd->Instance->FIFO, (uint32_t)(BlockSize * NumberOfBlocks)/4); + + /* Enable SDIO DMA transfer */ + __HAL_SD_SDIO_DMA_ENABLE(); + + if (hsd->CardType == HIGH_CAPACITY_SD_CARD) + { + BlockSize = 512; + WriteAddr /= 512; + } + + /* Set Block Size for Card */ + sdio_cmdinitstructure.Argument = (uint32_t)BlockSize; + sdio_cmdinitstructure.CmdIndex = SD_CMD_SET_BLOCKLEN; + sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT; + sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO; + sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE; + SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure); + + /* Check for error conditions */ + errorstate = SD_CmdResp1Error(hsd, SD_CMD_SET_BLOCKLEN); + + if (errorstate != SD_OK) + { + return errorstate; + } + + /* Check number of blocks command */ + if(NumberOfBlocks <= 1) + { + /* Send CMD24 WRITE_SINGLE_BLOCK */ + sdio_cmdinitstructure.CmdIndex = SD_CMD_WRITE_SINGLE_BLOCK; + } + else + { + /* Send CMD25 WRITE_MULT_BLOCK with argument data address */ + sdio_cmdinitstructure.CmdIndex = SD_CMD_WRITE_MULT_BLOCK; + } + + sdio_cmdinitstructure.Argument = (uint32_t)WriteAddr; + SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure); + + /* Check for error conditions */ + if(NumberOfBlocks > 1) + { + errorstate = SD_CmdResp1Error(hsd, SD_CMD_WRITE_MULT_BLOCK); + } + else + { + errorstate = SD_CmdResp1Error(hsd, SD_CMD_WRITE_SINGLE_BLOCK); + } + + if (errorstate != SD_OK) + { + return errorstate; + } + + /* Configure the SD DPSM (Data Path State Machine) */ + sdio_datainitstructure.DataTimeOut = SD_DATATIMEOUT; + sdio_datainitstructure.DataLength = BlockSize * NumberOfBlocks; + sdio_datainitstructure.DataBlockSize = SDIO_DATABLOCK_SIZE_512B; + sdio_datainitstructure.TransferDir = SDIO_TRANSFER_DIR_TO_CARD; + sdio_datainitstructure.TransferMode = SDIO_TRANSFER_MODE_BLOCK; + sdio_datainitstructure.DPSM = SDIO_DPSM_ENABLE; + SDIO_DataConfig(hsd->Instance, &sdio_datainitstructure); + + hsd->SdTransferErr = errorstate; + + return errorstate; +} + +/** + * @brief This function waits until the SD DMA data read transfer is finished. + * This API should be called after HAL_SD_ReadBlocks_DMA() function + * to insure that all data sent by the card is already transferred by the + * DMA controller. + * @param hsd: SD handle + * @param Timeout: Timeout duration + * @retval SD Card error state + */ +HAL_SD_ErrorTypedef HAL_SD_CheckReadOperation(SD_HandleTypeDef *hsd, uint32_t Timeout) +{ + HAL_SD_ErrorTypedef errorstate = SD_OK; + uint32_t timeout = Timeout; + uint32_t tmp1, tmp2; + HAL_SD_ErrorTypedef tmp3; + + /* Wait for DMA/SD transfer end or SD error variables to be in SD handle */ + tmp1 = hsd->DmaTransferCplt; + tmp2 = hsd->SdTransferCplt; + tmp3 = (HAL_SD_ErrorTypedef)hsd->SdTransferErr; + + while ((tmp1 == 0) && (tmp2 == 0) && (tmp3 == SD_OK) && (timeout > 0)) + { + tmp1 = hsd->DmaTransferCplt; + tmp2 = hsd->SdTransferCplt; + tmp3 = (HAL_SD_ErrorTypedef)hsd->SdTransferErr; + timeout--; + } + + timeout = Timeout; + + /* Wait until the Rx transfer is no longer active */ + while((__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXACT)) && (timeout > 0)) + { + timeout--; + } + + /* Send stop command in multiblock read */ + if (hsd->SdOperation == SD_READ_MULTIPLE_BLOCK) + { + errorstate = HAL_SD_StopTransfer(hsd); + } + + if ((timeout == 0) && (errorstate == SD_OK)) + { + errorstate = SD_DATA_TIMEOUT; + } + + /* Clear all the static flags */ + __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS); + + /* Return error state */ + if (hsd->SdTransferErr != SD_OK) + { + return (HAL_SD_ErrorTypedef)(hsd->SdTransferErr); + } + + return errorstate; +} + +/** + * @brief This function waits until the SD DMA data write transfer is finished. + * This API should be called after HAL_SD_WriteBlocks_DMA() function + * to insure that all data sent by the card is already transferred by the + * DMA controller. + * @param hsd: SD handle + * @param Timeout: Timeout duration + * @retval SD Card error state + */ +HAL_SD_ErrorTypedef HAL_SD_CheckWriteOperation(SD_HandleTypeDef *hsd, uint32_t Timeout) +{ + HAL_SD_ErrorTypedef errorstate = SD_OK; + uint32_t timeout = Timeout; + uint32_t tmp1, tmp2; + HAL_SD_ErrorTypedef tmp3; + + /* Wait for DMA/SD transfer end or SD error variables to be in SD handle */ + tmp1 = hsd->DmaTransferCplt; + tmp2 = hsd->SdTransferCplt; + tmp3 = (HAL_SD_ErrorTypedef)hsd->SdTransferErr; + + while ((tmp1 == 0) && (tmp2 == 0) && (tmp3 == SD_OK) && (timeout > 0)) + { + tmp1 = hsd->DmaTransferCplt; + tmp2 = hsd->SdTransferCplt; + tmp3 = (HAL_SD_ErrorTypedef)hsd->SdTransferErr; + timeout--; + } + + timeout = Timeout; + + /* Wait until the Tx transfer is no longer active */ + while((__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_TXACT)) && (timeout > 0)) + { + timeout--; + } + + /* Send stop command in multiblock write */ + if (hsd->SdOperation == SD_WRITE_MULTIPLE_BLOCK) + { + errorstate = HAL_SD_StopTransfer(hsd); + } + + if ((timeout == 0) && (errorstate == SD_OK)) + { + errorstate = SD_DATA_TIMEOUT; + } + + /* Clear all the static flags */ + __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS); + + /* Return error state */ + if (hsd->SdTransferErr != SD_OK) + { + return (HAL_SD_ErrorTypedef)(hsd->SdTransferErr); + } + + /* Wait until write is complete */ + while(HAL_SD_GetStatus(hsd) != SD_TRANSFER_OK) + { + } + + return errorstate; +} + +/** + * @brief Erases the specified memory area of the given SD card. + * @param hsd: SD handle + * @param startaddr: Start byte address + * @param endaddr: End byte address + * @retval SD Card error state + */ +HAL_SD_ErrorTypedef HAL_SD_Erase(SD_HandleTypeDef *hsd, uint64_t startaddr, uint64_t endaddr) +{ + HAL_SD_ErrorTypedef errorstate = SD_OK; + SDIO_CmdInitTypeDef sdio_cmdinitstructure; + + uint32_t delay = 0; + __IO uint32_t maxdelay = 0; + uint8_t cardstate = 0; + + /* Check if the card command class supports erase command */ + if (((hsd->CSD[1] >> 20) & SD_CCCC_ERASE) == 0) + { + errorstate = SD_REQUEST_NOT_APPLICABLE; + + return errorstate; + } + + /* Get max delay value */ + maxdelay = 120000 / (((hsd->Instance->CLKCR) & 0xFF) + 2); + + if((SDIO_GetResponse(SDIO_RESP1) & SD_CARD_LOCKED) == SD_CARD_LOCKED) + { + errorstate = SD_LOCK_UNLOCK_FAILED; + + return errorstate; + } + + /* Get start and end block for high capacity cards */ + if (hsd->CardType == HIGH_CAPACITY_SD_CARD) + { + startaddr /= 512; + endaddr /= 512; + } + + /* According to sd-card spec 1.0 ERASE_GROUP_START (CMD32) and erase_group_end(CMD33) */ + if ((hsd->CardType == STD_CAPACITY_SD_CARD_V1_1) || (hsd->CardType == STD_CAPACITY_SD_CARD_V2_0) ||\ + (hsd->CardType == HIGH_CAPACITY_SD_CARD)) + { + /* Send CMD32 SD_ERASE_GRP_START with argument as addr */ + sdio_cmdinitstructure.Argument =(uint32_t)startaddr; + sdio_cmdinitstructure.CmdIndex = SD_CMD_SD_ERASE_GRP_START; + sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT; + sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO; + sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE; + SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure); + + /* Check for error conditions */ + errorstate = SD_CmdResp1Error(hsd, SD_CMD_SD_ERASE_GRP_START); + + if (errorstate != SD_OK) + { + return errorstate; + } + + /* Send CMD33 SD_ERASE_GRP_END with argument as addr */ + sdio_cmdinitstructure.Argument = (uint32_t)endaddr; + sdio_cmdinitstructure.CmdIndex = SD_CMD_SD_ERASE_GRP_END; + SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure); + + /* Check for error conditions */ + errorstate = SD_CmdResp1Error(hsd, SD_CMD_SD_ERASE_GRP_END); + + if (errorstate != SD_OK) + { + return errorstate; + } + } + + /* Send CMD38 ERASE */ + sdio_cmdinitstructure.Argument = 0; + sdio_cmdinitstructure.CmdIndex = SD_CMD_ERASE; + SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure); + + /* Check for error conditions */ + errorstate = SD_CmdResp1Error(hsd, SD_CMD_ERASE); + + if (errorstate != SD_OK) + { + return errorstate; + } + + for (; delay < maxdelay; delay++) + { + } + + /* Wait until the card is in programming state */ + errorstate = SD_IsCardProgramming(hsd, &cardstate); + + delay = SD_DATATIMEOUT; + + while ((delay > 0) && (errorstate == SD_OK) && ((cardstate == SD_CARD_PROGRAMMING) || (cardstate == SD_CARD_RECEIVING))) + { + errorstate = SD_IsCardProgramming(hsd, &cardstate); + delay--; + } + + return errorstate; +} + +/** + * @brief This function handles SD card interrupt request. + * @param hsd: SD handle + * @retval None + */ +void HAL_SD_IRQHandler(SD_HandleTypeDef *hsd) +{ + /* Check for SDIO interrupt flags */ + if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_IT_DATAEND)) + { + __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_IT_DATAEND); + + /* SD transfer is complete */ + hsd->SdTransferCplt = 1; + + /* No transfer error */ + hsd->SdTransferErr = SD_OK; + + HAL_SD_XferCpltCallback(hsd); + } + else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_IT_DCRCFAIL)) + { + __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_DCRCFAIL); + + hsd->SdTransferErr = SD_DATA_CRC_FAIL; + + HAL_SD_XferErrorCallback(hsd); + + } + else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_IT_DTIMEOUT)) + { + __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_DTIMEOUT); + + hsd->SdTransferErr = SD_DATA_TIMEOUT; + + HAL_SD_XferErrorCallback(hsd); + } + else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_IT_RXOVERR)) + { + __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_RXOVERR); + + hsd->SdTransferErr = SD_RX_OVERRUN; + + HAL_SD_XferErrorCallback(hsd); + } + else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_IT_TXUNDERR)) + { + __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_TXUNDERR); + + hsd->SdTransferErr = SD_TX_UNDERRUN; + + HAL_SD_XferErrorCallback(hsd); + } + else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_IT_STBITERR)) + { + __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_STBITERR); + + hsd->SdTransferErr = SD_START_BIT_ERR; + + HAL_SD_XferErrorCallback(hsd); + } + else + { + /* No error flag set */ + } + + /* Disable all SDIO peripheral interrupt sources */ + __HAL_SD_SDIO_DISABLE_IT(hsd, SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT | SDIO_IT_DATAEND |\ + SDIO_IT_TXFIFOHE | SDIO_IT_RXFIFOHF | SDIO_IT_TXUNDERR |\ + SDIO_IT_RXOVERR | SDIO_IT_STBITERR); +} + + +/** + * @brief SD end of transfer callback. + * @param hsd: SD handle + * @retval None + */ +__weak void HAL_SD_XferCpltCallback(SD_HandleTypeDef *hsd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsd); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_SD_XferCpltCallback could be implemented in the user file + */ +} + +/** + * @brief SD Transfer Error callback. + * @param hsd: SD handle + * @retval None + */ +__weak void HAL_SD_XferErrorCallback(SD_HandleTypeDef *hsd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsd); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_SD_XferErrorCallback could be implemented in the user file + */ +} + +/** + * @brief SD Transfer complete Rx callback in non blocking mode. + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +__weak void HAL_SD_DMA_RxCpltCallback(DMA_HandleTypeDef *hdma) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hdma); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_SD_DMA_RxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief SD DMA transfer complete Rx error callback. + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +__weak void HAL_SD_DMA_RxErrorCallback(DMA_HandleTypeDef *hdma) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hdma); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_SD_DMA_RxErrorCallback could be implemented in the user file + */ +} + +/** + * @brief SD Transfer complete Tx callback in non blocking mode. + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +__weak void HAL_SD_DMA_TxCpltCallback(DMA_HandleTypeDef *hdma) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hdma); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_SD_DMA_TxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief SD DMA transfer complete error Tx callback. + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +__weak void HAL_SD_DMA_TxErrorCallback(DMA_HandleTypeDef *hdma) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hdma); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_SD_DMA_TxErrorCallback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @addtogroup SD_Exported_Functions_Group3 + * @brief management functions + * +@verbatim + ============================================================================== + ##### Peripheral Control functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to control the SD card + operations. + +@endverbatim + * @{ + */ + +/** + * @brief Returns information about specific card. + * @param hsd: SD handle + * @param pCardInfo: Pointer to a HAL_SD_CardInfoTypedef structure that + * contains all SD cardinformation + * @retval SD Card error state + */ +HAL_SD_ErrorTypedef HAL_SD_Get_CardInfo(SD_HandleTypeDef *hsd, HAL_SD_CardInfoTypedef *pCardInfo) +{ + HAL_SD_ErrorTypedef errorstate = SD_OK; + uint32_t tmp = 0; + + pCardInfo->CardType = (uint8_t)(hsd->CardType); + pCardInfo->RCA = (uint16_t)(hsd->RCA); + + /* Byte 0 */ + tmp = (hsd->CSD[0] & 0xFF000000U) >> 24; + pCardInfo->SD_csd.CSDStruct = (uint8_t)((tmp & 0xC0) >> 6); + pCardInfo->SD_csd.SysSpecVersion = (uint8_t)((tmp & 0x3C) >> 2); + pCardInfo->SD_csd.Reserved1 = tmp & 0x03; + + /* Byte 1 */ + tmp = (hsd->CSD[0] & 0x00FF0000U) >> 16; + pCardInfo->SD_csd.TAAC = (uint8_t)tmp; + + /* Byte 2 */ + tmp = (hsd->CSD[0] & 0x0000FF00U) >> 8; + pCardInfo->SD_csd.NSAC = (uint8_t)tmp; + + /* Byte 3 */ + tmp = hsd->CSD[0] & 0x000000FFU; + pCardInfo->SD_csd.MaxBusClkFrec = (uint8_t)tmp; + + /* Byte 4 */ + tmp = (hsd->CSD[1] & 0xFF000000U) >> 24; + pCardInfo->SD_csd.CardComdClasses = (uint16_t)(tmp << 4); + + /* Byte 5 */ + tmp = (hsd->CSD[1] & 0x00FF0000U) >> 16; + pCardInfo->SD_csd.CardComdClasses |= (uint16_t)((tmp & 0xF0) >> 4); + pCardInfo->SD_csd.RdBlockLen = (uint8_t)(tmp & 0x0F); + + /* Byte 6 */ + tmp = (hsd->CSD[1] & 0x0000FF00U) >> 8; + pCardInfo->SD_csd.PartBlockRead = (uint8_t)((tmp & 0x80) >> 7); + pCardInfo->SD_csd.WrBlockMisalign = (uint8_t)((tmp & 0x40) >> 6); + pCardInfo->SD_csd.RdBlockMisalign = (uint8_t)((tmp & 0x20) >> 5); + pCardInfo->SD_csd.DSRImpl = (uint8_t)((tmp & 0x10) >> 4); + pCardInfo->SD_csd.Reserved2 = 0; /*!< Reserved */ + + if ((hsd->CardType == STD_CAPACITY_SD_CARD_V1_1) || (hsd->CardType == STD_CAPACITY_SD_CARD_V2_0)) + { + pCardInfo->SD_csd.DeviceSize = (tmp & 0x03) << 10; + + /* Byte 7 */ + tmp = (uint8_t)(hsd->CSD[1] & 0x000000FFU); + pCardInfo->SD_csd.DeviceSize |= (tmp) << 2; + + /* Byte 8 */ + tmp = (uint8_t)((hsd->CSD[2] & 0xFF000000U) >> 24); + pCardInfo->SD_csd.DeviceSize |= (tmp & 0xC0) >> 6; + + pCardInfo->SD_csd.MaxRdCurrentVDDMin = (tmp & 0x38) >> 3; + pCardInfo->SD_csd.MaxRdCurrentVDDMax = (tmp & 0x07); + + /* Byte 9 */ + tmp = (uint8_t)((hsd->CSD[2] & 0x00FF0000U) >> 16); + pCardInfo->SD_csd.MaxWrCurrentVDDMin = (tmp & 0xE0) >> 5; + pCardInfo->SD_csd.MaxWrCurrentVDDMax = (tmp & 0x1C) >> 2; + pCardInfo->SD_csd.DeviceSizeMul = (tmp & 0x03) << 1; + /* Byte 10 */ + tmp = (uint8_t)((hsd->CSD[2] & 0x0000FF00U) >> 8); + pCardInfo->SD_csd.DeviceSizeMul |= (tmp & 0x80) >> 7; + + pCardInfo->CardCapacity = (pCardInfo->SD_csd.DeviceSize + 1) ; + pCardInfo->CardCapacity *= (1 << (pCardInfo->SD_csd.DeviceSizeMul + 2)); + pCardInfo->CardBlockSize = 1 << (pCardInfo->SD_csd.RdBlockLen); + pCardInfo->CardCapacity *= pCardInfo->CardBlockSize; + } + else if (hsd->CardType == HIGH_CAPACITY_SD_CARD) + { + /* Byte 7 */ + tmp = (uint8_t)(hsd->CSD[1] & 0x000000FFU); + pCardInfo->SD_csd.DeviceSize = (tmp & 0x3F) << 16; + + /* Byte 8 */ + tmp = (uint8_t)((hsd->CSD[2] & 0xFF000000U) >> 24); + + pCardInfo->SD_csd.DeviceSize |= (tmp << 8); + + /* Byte 9 */ + tmp = (uint8_t)((hsd->CSD[2] & 0x00FF0000U) >> 16); + + pCardInfo->SD_csd.DeviceSize |= (tmp); + + /* Byte 10 */ + tmp = (uint8_t)((hsd->CSD[2] & 0x0000FF00U) >> 8); + + pCardInfo->CardCapacity = (uint64_t)((((uint64_t)pCardInfo->SD_csd.DeviceSize + 1)) * 512 * 1024); + pCardInfo->CardBlockSize = 512; + } + else + { + /* Not supported card type */ + errorstate = SD_ERROR; + } + + pCardInfo->SD_csd.EraseGrSize = (tmp & 0x40) >> 6; + pCardInfo->SD_csd.EraseGrMul = (tmp & 0x3F) << 1; + + /* Byte 11 */ + tmp = (uint8_t)(hsd->CSD[2] & 0x000000FFU); + pCardInfo->SD_csd.EraseGrMul |= (tmp & 0x80) >> 7; + pCardInfo->SD_csd.WrProtectGrSize = (tmp & 0x7F); + + /* Byte 12 */ + tmp = (uint8_t)((hsd->CSD[3] & 0xFF000000U) >> 24); + pCardInfo->SD_csd.WrProtectGrEnable = (tmp & 0x80) >> 7; + pCardInfo->SD_csd.ManDeflECC = (tmp & 0x60) >> 5; + pCardInfo->SD_csd.WrSpeedFact = (tmp & 0x1C) >> 2; + pCardInfo->SD_csd.MaxWrBlockLen = (tmp & 0x03) << 2; + + /* Byte 13 */ + tmp = (uint8_t)((hsd->CSD[3] & 0x00FF0000U) >> 16); + pCardInfo->SD_csd.MaxWrBlockLen |= (tmp & 0xC0) >> 6; + pCardInfo->SD_csd.WriteBlockPaPartial = (tmp & 0x20) >> 5; + pCardInfo->SD_csd.Reserved3 = 0; + pCardInfo->SD_csd.ContentProtectAppli = (tmp & 0x01); + + /* Byte 14 */ + tmp = (uint8_t)((hsd->CSD[3] & 0x0000FF00U) >> 8); + pCardInfo->SD_csd.FileFormatGrouop = (tmp & 0x80) >> 7; + pCardInfo->SD_csd.CopyFlag = (tmp & 0x40) >> 6; + pCardInfo->SD_csd.PermWrProtect = (tmp & 0x20) >> 5; + pCardInfo->SD_csd.TempWrProtect = (tmp & 0x10) >> 4; + pCardInfo->SD_csd.FileFormat = (tmp & 0x0C) >> 2; + pCardInfo->SD_csd.ECC = (tmp & 0x03); + + /* Byte 15 */ + tmp = (uint8_t)(hsd->CSD[3] & 0x000000FFU); + pCardInfo->SD_csd.CSD_CRC = (tmp & 0xFE) >> 1; + pCardInfo->SD_csd.Reserved4 = 1; + + /* Byte 0 */ + tmp = (uint8_t)((hsd->CID[0] & 0xFF000000U) >> 24); + pCardInfo->SD_cid.ManufacturerID = tmp; + + /* Byte 1 */ + tmp = (uint8_t)((hsd->CID[0] & 0x00FF0000U) >> 16); + pCardInfo->SD_cid.OEM_AppliID = tmp << 8; + + /* Byte 2 */ + tmp = (uint8_t)((hsd->CID[0] & 0x000000FF00U) >> 8); + pCardInfo->SD_cid.OEM_AppliID |= tmp; + + /* Byte 3 */ + tmp = (uint8_t)(hsd->CID[0] & 0x000000FFU); + pCardInfo->SD_cid.ProdName1 = tmp << 24; + + /* Byte 4 */ + tmp = (uint8_t)((hsd->CID[1] & 0xFF000000U) >> 24); + pCardInfo->SD_cid.ProdName1 |= tmp << 16; + + /* Byte 5 */ + tmp = (uint8_t)((hsd->CID[1] & 0x00FF0000U) >> 16); + pCardInfo->SD_cid.ProdName1 |= tmp << 8; + + /* Byte 6 */ + tmp = (uint8_t)((hsd->CID[1] & 0x0000FF00U) >> 8); + pCardInfo->SD_cid.ProdName1 |= tmp; + + /* Byte 7 */ + tmp = (uint8_t)(hsd->CID[1] & 0x000000FFU); + pCardInfo->SD_cid.ProdName2 = tmp; + + /* Byte 8 */ + tmp = (uint8_t)((hsd->CID[2] & 0xFF000000U) >> 24); + pCardInfo->SD_cid.ProdRev = tmp; + + /* Byte 9 */ + tmp = (uint8_t)((hsd->CID[2] & 0x00FF0000U) >> 16); + pCardInfo->SD_cid.ProdSN = tmp << 24; + + /* Byte 10 */ + tmp = (uint8_t)((hsd->CID[2] & 0x0000FF00U) >> 8); + pCardInfo->SD_cid.ProdSN |= tmp << 16; + + /* Byte 11 */ + tmp = (uint8_t)(hsd->CID[2] & 0x000000FFU); + pCardInfo->SD_cid.ProdSN |= tmp << 8; + + /* Byte 12 */ + tmp = (uint8_t)((hsd->CID[3] & 0xFF000000U) >> 24); + pCardInfo->SD_cid.ProdSN |= tmp; + + /* Byte 13 */ + tmp = (uint8_t)((hsd->CID[3] & 0x00FF0000U) >> 16); + pCardInfo->SD_cid.Reserved1 |= (tmp & 0xF0) >> 4; + pCardInfo->SD_cid.ManufactDate = (tmp & 0x0F) << 8; + + /* Byte 14 */ + tmp = (uint8_t)((hsd->CID[3] & 0x0000FF00U) >> 8); + pCardInfo->SD_cid.ManufactDate |= tmp; + + /* Byte 15 */ + tmp = (uint8_t)(hsd->CID[3] & 0x000000FFU); + pCardInfo->SD_cid.CID_CRC = (tmp & 0xFE) >> 1; + pCardInfo->SD_cid.Reserved2 = 1; + + return errorstate; +} + +/** + * @brief Enables wide bus operation for the requested card if supported by + * card. + * @param hsd: SD handle + * @param WideMode: Specifies the SD card wide bus mode + * This parameter can be one of the following values: + * @arg SDIO_BUS_WIDE_8B: 8-bit data transfer (Only for MMC) + * @arg SDIO_BUS_WIDE_4B: 4-bit data transfer + * @arg SDIO_BUS_WIDE_1B: 1-bit data transfer + * @retval SD Card error state + */ +HAL_SD_ErrorTypedef HAL_SD_WideBusOperation_Config(SD_HandleTypeDef *hsd, uint32_t WideMode) +{ + HAL_SD_ErrorTypedef errorstate = SD_OK; + SDIO_InitTypeDef tmpinit; + + /* MMC Card does not support this feature */ + if (hsd->CardType == MULTIMEDIA_CARD) + { + errorstate = SD_UNSUPPORTED_FEATURE; + } + else if ((hsd->CardType == STD_CAPACITY_SD_CARD_V1_1) || (hsd->CardType == STD_CAPACITY_SD_CARD_V2_0) ||\ + (hsd->CardType == HIGH_CAPACITY_SD_CARD)) + { + if (WideMode == SDIO_BUS_WIDE_8B) + { + errorstate = SD_UNSUPPORTED_FEATURE; + } + else if (WideMode == SDIO_BUS_WIDE_4B) + { + errorstate = SD_WideBus_Enable(hsd); + } + else if (WideMode == SDIO_BUS_WIDE_1B) + { + errorstate = SD_WideBus_Disable(hsd); + } + else + { + /* WideMode is not a valid argument*/ + errorstate = SD_INVALID_PARAMETER; + } + + if (errorstate == SD_OK) + { + /* Configure the SDIO peripheral */ + tmpinit.ClockEdge = hsd->Init.ClockEdge; + tmpinit.ClockBypass = hsd->Init.ClockBypass; + tmpinit.ClockPowerSave = hsd->Init.ClockPowerSave; + tmpinit.BusWide = WideMode; + tmpinit.HardwareFlowControl = hsd->Init.HardwareFlowControl; + tmpinit.ClockDiv = hsd->Init.ClockDiv; + + /* Configure SDIO peripheral interface */ + SDIO_Init(hsd->Instance, tmpinit); + } + else + { + /* An error occured while enabling/disabling the wide bus*/ + } + } + else + { + /* Not supported card type */ + errorstate = SD_ERROR; + } + + return errorstate; +} + +/** + * @brief Aborts an ongoing data transfer. + * @param hsd: SD handle + * @retval SD Card error state + */ +HAL_SD_ErrorTypedef HAL_SD_StopTransfer(SD_HandleTypeDef *hsd) +{ + SDIO_CmdInitTypeDef sdio_cmdinitstructure; + HAL_SD_ErrorTypedef errorstate = SD_OK; + + /* Send CMD12 STOP_TRANSMISSION */ + sdio_cmdinitstructure.Argument = 0; + sdio_cmdinitstructure.CmdIndex = SD_CMD_STOP_TRANSMISSION; + sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT; + sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO; + sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE; + SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure); + + /* Check for error conditions */ + errorstate = SD_CmdResp1Error(hsd, SD_CMD_STOP_TRANSMISSION); + + return errorstate; +} + +/** + * @brief Switches the SD card to High Speed mode. + * This API must be used after "Transfer State" + * @note This operation should be followed by the configuration + * of PLL to have SDIOCK clock between 67 and 75 MHz + * @param hsd: SD handle + * @retval SD Card error state + */ +HAL_SD_ErrorTypedef HAL_SD_HighSpeed (SD_HandleTypeDef *hsd) +{ + HAL_SD_ErrorTypedef errorstate = SD_OK; + SDIO_CmdInitTypeDef sdio_cmdinitstructure; + SDIO_DataInitTypeDef sdio_datainitstructure; + + uint8_t SD_hs[64] = {0}; + uint32_t SD_scr[2] = {0, 0}; + uint32_t SD_SPEC = 0 ; + uint32_t count = 0, *tempbuff = (uint32_t *)SD_hs; + + /* Initialize the Data control register */ + hsd->Instance->DCTRL = 0; + + /* Get SCR Register */ + errorstate = SD_FindSCR(hsd, SD_scr); + + if (errorstate != SD_OK) + { + return errorstate; + } + + /* Test the Version supported by the card*/ + SD_SPEC = (SD_scr[1] & 0x01000000U) | (SD_scr[1] & 0x02000000U); + + if (SD_SPEC != SD_ALLZERO) + { + /* Set Block Size for Card */ + sdio_cmdinitstructure.Argument = (uint32_t)64; + sdio_cmdinitstructure.CmdIndex = SD_CMD_SET_BLOCKLEN; + sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT; + sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO; + sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE; + SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure); + + /* Check for error conditions */ + errorstate = SD_CmdResp1Error(hsd, SD_CMD_SET_BLOCKLEN); + + if (errorstate != SD_OK) + { + return errorstate; + } + + /* Configure the SD DPSM (Data Path State Machine) */ + sdio_datainitstructure.DataTimeOut = SD_DATATIMEOUT; + sdio_datainitstructure.DataLength = 64; + sdio_datainitstructure.DataBlockSize = SDIO_DATABLOCK_SIZE_64B ; + sdio_datainitstructure.TransferDir = SDIO_TRANSFER_DIR_TO_SDIO; + sdio_datainitstructure.TransferMode = SDIO_TRANSFER_MODE_BLOCK; + sdio_datainitstructure.DPSM = SDIO_DPSM_ENABLE; + SDIO_DataConfig(hsd->Instance, &sdio_datainitstructure); + + /* Send CMD6 switch mode */ + sdio_cmdinitstructure.Argument = 0x80FFFF01U; + sdio_cmdinitstructure.CmdIndex = SD_CMD_HS_SWITCH; + SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure); + + /* Check for error conditions */ + errorstate = SD_CmdResp1Error(hsd, SD_CMD_HS_SWITCH); + + if (errorstate != SD_OK) + { + return errorstate; + } + + while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXOVERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DBCKEND | SDIO_FLAG_STBITERR)) + { + if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXFIFOHF)) + { + for (count = 0; count < 8; count++) + { + *(tempbuff + count) = SDIO_ReadFIFO(hsd->Instance); + } + + tempbuff += 8; + } + } + + if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_DTIMEOUT)) + { + __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_DTIMEOUT); + + errorstate = SD_DATA_TIMEOUT; + + return errorstate; + } + else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_DCRCFAIL)) + { + __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_DCRCFAIL); + + errorstate = SD_DATA_CRC_FAIL; + + return errorstate; + } + else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXOVERR)) + { + __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_RXOVERR); + + errorstate = SD_RX_OVERRUN; + + return errorstate; + } + else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_STBITERR)) + { + __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_STBITERR); + + errorstate = SD_START_BIT_ERR; + + return errorstate; + } + else + { + /* No error flag set */ + } + + count = SD_DATATIMEOUT; + + while ((__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXDAVL)) && (count > 0)) + { + *tempbuff = SDIO_ReadFIFO(hsd->Instance); + tempbuff++; + count--; + } + + /* Clear all the static flags */ + __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS); + + /* Test if the switch mode HS is ok */ + if ((SD_hs[13]& 2) != 2) + { + errorstate = SD_UNSUPPORTED_FEATURE; + } + } + + return errorstate; +} + +/** + * @} + */ + +/** @addtogroup SD_Exported_Functions_Group4 + * @brief Peripheral State functions + * +@verbatim + ============================================================================== + ##### Peripheral State functions ##### + ============================================================================== + [..] + This subsection permits to get in runtime the status of the peripheral + and the data flow. + +@endverbatim + * @{ + */ + +/** + * @brief Returns the current SD card's status. + * @param hsd: SD handle + * @param pSDstatus: Pointer to the buffer that will contain the SD card status + * SD Status register) + * @retval SD Card error state + */ +HAL_SD_ErrorTypedef HAL_SD_SendSDStatus(SD_HandleTypeDef *hsd, uint32_t *pSDstatus) +{ + SDIO_CmdInitTypeDef sdio_cmdinitstructure; + SDIO_DataInitTypeDef sdio_datainitstructure; + HAL_SD_ErrorTypedef errorstate = SD_OK; + uint32_t count = 0; + + /* Check SD response */ + if ((SDIO_GetResponse(SDIO_RESP1) & SD_CARD_LOCKED) == SD_CARD_LOCKED) + { + errorstate = SD_LOCK_UNLOCK_FAILED; + + return errorstate; + } + + /* Set block size for card if it is not equal to current block size for card */ + sdio_cmdinitstructure.Argument = 64; + sdio_cmdinitstructure.CmdIndex = SD_CMD_SET_BLOCKLEN; + sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT; + sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO; + sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE; + SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure); + + /* Check for error conditions */ + errorstate = SD_CmdResp1Error(hsd, SD_CMD_SET_BLOCKLEN); + + if (errorstate != SD_OK) + { + return errorstate; + } + + /* Send CMD55 */ + sdio_cmdinitstructure.Argument = (uint32_t)(hsd->RCA << 16); + sdio_cmdinitstructure.CmdIndex = SD_CMD_APP_CMD; + SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure); + + /* Check for error conditions */ + errorstate = SD_CmdResp1Error(hsd, SD_CMD_APP_CMD); + + if (errorstate != SD_OK) + { + return errorstate; + } + + /* Configure the SD DPSM (Data Path State Machine) */ + sdio_datainitstructure.DataTimeOut = SD_DATATIMEOUT; + sdio_datainitstructure.DataLength = 64; + sdio_datainitstructure.DataBlockSize = SDIO_DATABLOCK_SIZE_64B; + sdio_datainitstructure.TransferDir = SDIO_TRANSFER_DIR_TO_SDIO; + sdio_datainitstructure.TransferMode = SDIO_TRANSFER_MODE_BLOCK; + sdio_datainitstructure.DPSM = SDIO_DPSM_ENABLE; + SDIO_DataConfig(hsd->Instance, &sdio_datainitstructure); + + /* Send ACMD13 (SD_APP_STATUS) with argument as card's RCA */ + sdio_cmdinitstructure.Argument = 0; + sdio_cmdinitstructure.CmdIndex = SD_CMD_SD_APP_STATUS; + SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure); + + /* Check for error conditions */ + errorstate = SD_CmdResp1Error(hsd, SD_CMD_SD_APP_STATUS); + + if (errorstate != SD_OK) + { + return errorstate; + } + + /* Get status data */ + while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXOVERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DBCKEND | SDIO_FLAG_STBITERR)) + { + if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXFIFOHF)) + { + for (count = 0; count < 8; count++) + { + *(pSDstatus + count) = SDIO_ReadFIFO(hsd->Instance); + } + + pSDstatus += 8; + } + } + + if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_DTIMEOUT)) + { + __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_DTIMEOUT); + + errorstate = SD_DATA_TIMEOUT; + + return errorstate; + } + else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_DCRCFAIL)) + { + __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_DCRCFAIL); + + errorstate = SD_DATA_CRC_FAIL; + + return errorstate; + } + else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXOVERR)) + { + __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_RXOVERR); + + errorstate = SD_RX_OVERRUN; + + return errorstate; + } + else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_STBITERR)) + { + __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_STBITERR); + + errorstate = SD_START_BIT_ERR; + + return errorstate; + } + else + { + /* No error flag set */ + } + + count = SD_DATATIMEOUT; + while ((__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXDAVL)) && (count > 0)) + { + *pSDstatus = SDIO_ReadFIFO(hsd->Instance); + pSDstatus++; + count--; + } + + /* Clear all the static status flags*/ + __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS); + + return errorstate; +} + +/** + * @brief Gets the current sd card data status. + * @param hsd: SD handle + * @retval Data Transfer state + */ +HAL_SD_TransferStateTypedef HAL_SD_GetStatus(SD_HandleTypeDef *hsd) +{ + HAL_SD_CardStateTypedef cardstate = SD_CARD_TRANSFER; + + /* Get SD card state */ + cardstate = SD_GetState(hsd); + + /* Find SD status according to card state*/ + if (cardstate == SD_CARD_TRANSFER) + { + return SD_TRANSFER_OK; + } + else if(cardstate == SD_CARD_ERROR) + { + return SD_TRANSFER_ERROR; + } + else + { + return SD_TRANSFER_BUSY; + } +} + +/** + * @brief Gets the SD card status. + * @param hsd: SD handle + * @param pCardStatus: Pointer to the HAL_SD_CardStatusTypedef structure that + * will contain the SD card status information + * @retval SD Card error state + */ +HAL_SD_ErrorTypedef HAL_SD_GetCardStatus(SD_HandleTypeDef *hsd, HAL_SD_CardStatusTypedef *pCardStatus) +{ + HAL_SD_ErrorTypedef errorstate = SD_OK; + uint32_t tmp = 0; + uint32_t sd_status[16]; + + errorstate = HAL_SD_SendSDStatus(hsd, sd_status); + + if (errorstate != SD_OK) + { + return errorstate; + } + + /* Byte 0 */ + tmp = (sd_status[0] & 0xC0) >> 6; + pCardStatus->DAT_BUS_WIDTH = (uint8_t)tmp; + + /* Byte 0 */ + tmp = (sd_status[0] & 0x20) >> 5; + pCardStatus->SECURED_MODE = (uint8_t)tmp; + + /* Byte 2 */ + tmp = (sd_status[2] & 0xFF); + pCardStatus->SD_CARD_TYPE = (uint8_t)(tmp << 8); + + /* Byte 3 */ + tmp = (sd_status[3] & 0xFF); + pCardStatus->SD_CARD_TYPE |= (uint8_t)tmp; + + /* Byte 4 */ + tmp = (sd_status[4] & 0xFF); + pCardStatus->SIZE_OF_PROTECTED_AREA = (uint8_t)(tmp << 24); + + /* Byte 5 */ + tmp = (sd_status[5] & 0xFF); + pCardStatus->SIZE_OF_PROTECTED_AREA |= (uint8_t)(tmp << 16); + + /* Byte 6 */ + tmp = (sd_status[6] & 0xFF); + pCardStatus->SIZE_OF_PROTECTED_AREA |= (uint8_t)(tmp << 8); + + /* Byte 7 */ + tmp = (sd_status[7] & 0xFF); + pCardStatus->SIZE_OF_PROTECTED_AREA |= (uint8_t)tmp; + + /* Byte 8 */ + tmp = (sd_status[8] & 0xFF); + pCardStatus->SPEED_CLASS = (uint8_t)tmp; + + /* Byte 9 */ + tmp = (sd_status[9] & 0xFF); + pCardStatus->PERFORMANCE_MOVE = (uint8_t)tmp; + + /* Byte 10 */ + tmp = (sd_status[10] & 0xF0) >> 4; + pCardStatus->AU_SIZE = (uint8_t)tmp; + + /* Byte 11 */ + tmp = (sd_status[11] & 0xFF); + pCardStatus->ERASE_SIZE = (uint8_t)(tmp << 8); + + /* Byte 12 */ + tmp = (sd_status[12] & 0xFF); + pCardStatus->ERASE_SIZE |= (uint8_t)tmp; + + /* Byte 13 */ + tmp = (sd_status[13] & 0xFC) >> 2; + pCardStatus->ERASE_TIMEOUT = (uint8_t)tmp; + + /* Byte 13 */ + tmp = (sd_status[13] & 0x3); + pCardStatus->ERASE_OFFSET = (uint8_t)tmp; + + return errorstate; +} + +/** + * @} + */ + +/** + * @} + */ + +/* Private function ----------------------------------------------------------*/ +/** @addtogroup SD_Private_Functions + * @{ + */ + +/** + * @brief SD DMA transfer complete Rx callback. + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void SD_DMA_RxCplt(DMA_HandleTypeDef *hdma) +{ + SD_HandleTypeDef *hsd = (SD_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent; + + /* DMA transfer is complete */ + hsd->DmaTransferCplt = 1; + + /* Wait until SD transfer is complete */ + while(hsd->SdTransferCplt == 0) + { + } + + /* Disable the DMA channel */ + HAL_DMA_Abort(hdma); + + /* Transfer complete user callback */ + HAL_SD_DMA_RxCpltCallback(hsd->hdmarx); +} + +/** + * @brief SD DMA transfer Error Rx callback. + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void SD_DMA_RxError(DMA_HandleTypeDef *hdma) +{ + SD_HandleTypeDef *hsd = (SD_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent; + + /* Transfer complete user callback */ + HAL_SD_DMA_RxErrorCallback(hsd->hdmarx); +} + +/** + * @brief SD DMA transfer complete Tx callback. + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void SD_DMA_TxCplt(DMA_HandleTypeDef *hdma) +{ + SD_HandleTypeDef *hsd = (SD_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent; + + /* DMA transfer is complete */ + hsd->DmaTransferCplt = 1; + + /* Wait until SD transfer is complete */ + while(hsd->SdTransferCplt == 0) + { + } + + /* Disable the DMA channel */ + HAL_DMA_Abort(hdma); + + /* Transfer complete user callback */ + HAL_SD_DMA_TxCpltCallback(hsd->hdmatx); +} + +/** + * @brief SD DMA transfer Error Tx callback. + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void SD_DMA_TxError(DMA_HandleTypeDef *hdma) +{ + SD_HandleTypeDef *hsd = ( SD_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; + + /* Transfer complete user callback */ + HAL_SD_DMA_TxErrorCallback(hsd->hdmatx); +} + +/** + * @brief Returns the SD current state. + * @param hsd: SD handle + * @retval SD card current state + */ +static HAL_SD_CardStateTypedef SD_GetState(SD_HandleTypeDef *hsd) +{ + uint32_t resp1 = 0; + + if (SD_SendStatus(hsd, &resp1) != SD_OK) + { + return SD_CARD_ERROR; + } + else + { + return (HAL_SD_CardStateTypedef)((resp1 >> 9) & 0x0F); + } +} + +/** + * @brief Initializes all cards or single card as the case may be Card(s) come + * into standby state. + * @param hsd: SD handle + * @retval SD Card error state + */ +static HAL_SD_ErrorTypedef SD_Initialize_Cards(SD_HandleTypeDef *hsd) +{ + SDIO_CmdInitTypeDef sdio_cmdinitstructure; + HAL_SD_ErrorTypedef errorstate = SD_OK; + uint16_t sd_rca = 1; + + if(SDIO_GetPowerState(hsd->Instance) == 0) /* Power off */ + { + errorstate = SD_REQUEST_NOT_APPLICABLE; + + return errorstate; + } + + if(hsd->CardType != SECURE_DIGITAL_IO_CARD) + { + /* Send CMD2 ALL_SEND_CID */ + sdio_cmdinitstructure.Argument = 0; + sdio_cmdinitstructure.CmdIndex = SD_CMD_ALL_SEND_CID; + sdio_cmdinitstructure.Response = SDIO_RESPONSE_LONG; + sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO; + sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE; + SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure); + + /* Check for error conditions */ + errorstate = SD_CmdResp2Error(hsd); + + if(errorstate != SD_OK) + { + return errorstate; + } + + /* Get Card identification number data */ + hsd->CID[0] = SDIO_GetResponse(SDIO_RESP1); + hsd->CID[1] = SDIO_GetResponse(SDIO_RESP2); + hsd->CID[2] = SDIO_GetResponse(SDIO_RESP3); + hsd->CID[3] = SDIO_GetResponse(SDIO_RESP4); + } + + if((hsd->CardType == STD_CAPACITY_SD_CARD_V1_1) || (hsd->CardType == STD_CAPACITY_SD_CARD_V2_0) ||\ + (hsd->CardType == SECURE_DIGITAL_IO_COMBO_CARD) || (hsd->CardType == HIGH_CAPACITY_SD_CARD)) + { + /* Send CMD3 SET_REL_ADDR with argument 0 */ + /* SD Card publishes its RCA. */ + sdio_cmdinitstructure.CmdIndex = SD_CMD_SET_REL_ADDR; + sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT; + SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure); + + /* Check for error conditions */ + errorstate = SD_CmdResp6Error(hsd, SD_CMD_SET_REL_ADDR, &sd_rca); + + if(errorstate != SD_OK) + { + return errorstate; + } + } + + if (hsd->CardType != SECURE_DIGITAL_IO_CARD) + { + /* Get the SD card RCA */ + hsd->RCA = sd_rca; + + /* Send CMD9 SEND_CSD with argument as card's RCA */ + sdio_cmdinitstructure.Argument = (uint32_t)(hsd->RCA << 16); + sdio_cmdinitstructure.CmdIndex = SD_CMD_SEND_CSD; + sdio_cmdinitstructure.Response = SDIO_RESPONSE_LONG; + SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure); + + /* Check for error conditions */ + errorstate = SD_CmdResp2Error(hsd); + + if(errorstate != SD_OK) + { + return errorstate; + } + + /* Get Card Specific Data */ + hsd->CSD[0] = SDIO_GetResponse(SDIO_RESP1); + hsd->CSD[1] = SDIO_GetResponse(SDIO_RESP2); + hsd->CSD[2] = SDIO_GetResponse(SDIO_RESP3); + hsd->CSD[3] = SDIO_GetResponse(SDIO_RESP4); + } + + /* All cards are initialized */ + return errorstate; +} + +/** + * @brief Selects of Deselects the corresponding card. + * @param hsd: SD handle + * @param addr: Address of the card to be selected + * @retval SD Card error state + */ +static HAL_SD_ErrorTypedef SD_Select_Deselect(SD_HandleTypeDef *hsd, uint64_t addr) +{ + SDIO_CmdInitTypeDef sdio_cmdinitstructure; + HAL_SD_ErrorTypedef errorstate = SD_OK; + + /* Send CMD7 SDIO_SEL_DESEL_CARD */ + sdio_cmdinitstructure.Argument = (uint32_t)addr; + sdio_cmdinitstructure.CmdIndex = SD_CMD_SEL_DESEL_CARD; + sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT; + sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO; + sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE; + SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure); + + /* Check for error conditions */ + errorstate = SD_CmdResp1Error(hsd, SD_CMD_SEL_DESEL_CARD); + + return errorstate; +} + +/** + * @brief Enquires cards about their operating voltage and configures clock + * controls and stores SD information that will be needed in future + * in the SD handle. + * @param hsd: SD handle + * @retval SD Card error state + */ +static HAL_SD_ErrorTypedef SD_PowerON(SD_HandleTypeDef *hsd) +{ + SDIO_CmdInitTypeDef sdio_cmdinitstructure; + __IO HAL_SD_ErrorTypedef errorstate = SD_OK; + uint32_t response = 0, count = 0, validvoltage = 0; + uint32_t sdtype = SD_STD_CAPACITY; + + /* Power ON Sequence -------------------------------------------------------*/ + /* Disable SDIO Clock */ + __HAL_SD_SDIO_DISABLE(); + + /* Set Power State to ON */ + SDIO_PowerState_ON(hsd->Instance); + + /* 1ms: required power up waiting time before starting the SD initialization + sequence */ + HAL_Delay(1); + + /* Enable SDIO Clock */ + __HAL_SD_SDIO_ENABLE(); + + /* CMD0: GO_IDLE_STATE -----------------------------------------------------*/ + /* No CMD response required */ + sdio_cmdinitstructure.Argument = 0; + sdio_cmdinitstructure.CmdIndex = SD_CMD_GO_IDLE_STATE; + sdio_cmdinitstructure.Response = SDIO_RESPONSE_NO; + sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO; + sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE; + SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure); + + /* Check for error conditions */ + errorstate = SD_CmdError(hsd); + + if(errorstate != SD_OK) + { + /* CMD Response Timeout (wait for CMDSENT flag) */ + return errorstate; + } + + /* CMD8: SEND_IF_COND ------------------------------------------------------*/ + /* Send CMD8 to verify SD card interface operating condition */ + /* Argument: - [31:12]: Reserved (shall be set to '0') + - [11:8]: Supply Voltage (VHS) 0x1 (Range: 2.7-3.6 V) + - [7:0]: Check Pattern (recommended 0xAA) */ + /* CMD Response: R7 */ + sdio_cmdinitstructure.Argument = SD_CHECK_PATTERN; + sdio_cmdinitstructure.CmdIndex = SD_SDIO_SEND_IF_COND; + sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT; + SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure); + + /* Check for error conditions */ + errorstate = SD_CmdResp7Error(hsd); + + if (errorstate == SD_OK) + { + /* SD Card 2.0 */ + hsd->CardType = STD_CAPACITY_SD_CARD_V2_0; + sdtype = SD_HIGH_CAPACITY; + } + + /* Send CMD55 */ + sdio_cmdinitstructure.Argument = 0; + sdio_cmdinitstructure.CmdIndex = SD_CMD_APP_CMD; + SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure); + + /* Check for error conditions */ + errorstate = SD_CmdResp1Error(hsd, SD_CMD_APP_CMD); + + /* If errorstate is Command Timeout, it is a MMC card */ + /* If errorstate is SD_OK it is a SD card: SD card 2.0 (voltage range mismatch) + or SD card 1.x */ + if(errorstate == SD_OK) + { + /* SD CARD */ + /* Send ACMD41 SD_APP_OP_COND with Argument 0x80100000 */ + while((!validvoltage) && (count < SD_MAX_VOLT_TRIAL)) + { + + /* SEND CMD55 APP_CMD with RCA as 0 */ + sdio_cmdinitstructure.Argument = 0; + sdio_cmdinitstructure.CmdIndex = SD_CMD_APP_CMD; + sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT; + sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO; + sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE; + SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure); + + /* Check for error conditions */ + errorstate = SD_CmdResp1Error(hsd, SD_CMD_APP_CMD); + + if(errorstate != SD_OK) + { + return errorstate; + } + + /* Send CMD41 */ + sdio_cmdinitstructure.Argument = SD_VOLTAGE_WINDOW_SD | sdtype; + sdio_cmdinitstructure.CmdIndex = SD_CMD_SD_APP_OP_COND; + sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT; + sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO; + sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE; + SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure); + + /* Check for error conditions */ + errorstate = SD_CmdResp3Error(hsd); + + if(errorstate != SD_OK) + { + return errorstate; + } + + /* Get command response */ + response = SDIO_GetResponse(SDIO_RESP1); + + /* Get operating voltage*/ + validvoltage = (((response >> 31) == 1) ? 1 : 0); + + count++; + } + + if(count >= SD_MAX_VOLT_TRIAL) + { + errorstate = SD_INVALID_VOLTRANGE; + + return errorstate; + } + + if((response & SD_HIGH_CAPACITY) == SD_HIGH_CAPACITY) /* (response &= SD_HIGH_CAPACITY) */ + { + hsd->CardType = HIGH_CAPACITY_SD_CARD; + } + + } /* else MMC Card */ + + return errorstate; +} + +/** + * @brief Turns the SDIO output signals off. + * @param hsd: SD handle + * @retval SD Card error state + */ +static HAL_SD_ErrorTypedef SD_PowerOFF(SD_HandleTypeDef *hsd) +{ + HAL_SD_ErrorTypedef errorstate = SD_OK; + + /* Set Power State to OFF */ + SDIO_PowerState_OFF(hsd->Instance); + + return errorstate; +} + +/** + * @brief Returns the current card's status. + * @param hsd: SD handle + * @param pCardStatus: pointer to the buffer that will contain the SD card + * status (Card Status register) + * @retval SD Card error state + */ +static HAL_SD_ErrorTypedef SD_SendStatus(SD_HandleTypeDef *hsd, uint32_t *pCardStatus) +{ + SDIO_CmdInitTypeDef sdio_cmdinitstructure; + HAL_SD_ErrorTypedef errorstate = SD_OK; + + if(pCardStatus == NULL) + { + errorstate = SD_INVALID_PARAMETER; + + return errorstate; + } + + /* Send Status command */ + sdio_cmdinitstructure.Argument = (uint32_t)(hsd->RCA << 16); + sdio_cmdinitstructure.CmdIndex = SD_CMD_SEND_STATUS; + sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT; + sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO; + sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE; + SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure); + + /* Check for error conditions */ + errorstate = SD_CmdResp1Error(hsd, SD_CMD_SEND_STATUS); + + if(errorstate != SD_OK) + { + return errorstate; + } + + /* Get SD card status */ + *pCardStatus = SDIO_GetResponse(SDIO_RESP1); + + return errorstate; +} + +/** + * @brief Checks for error conditions for CMD0. + * @param hsd: SD handle + * @retval SD Card error state + */ +static HAL_SD_ErrorTypedef SD_CmdError(SD_HandleTypeDef *hsd) +{ + HAL_SD_ErrorTypedef errorstate = SD_OK; + uint32_t timeout, tmp; + + timeout = SDIO_CMD0TIMEOUT; + + tmp = __HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CMDSENT); + + while((timeout > 0) && (!tmp)) + { + tmp = __HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CMDSENT); + timeout--; + } + + if(timeout == 0) + { + errorstate = SD_CMD_RSP_TIMEOUT; + return errorstate; + } + + /* Clear all the static flags */ + __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS); + + return errorstate; +} + +/** + * @brief Checks for error conditions for R7 response. + * @param hsd: SD handle + * @retval SD Card error state + */ +static HAL_SD_ErrorTypedef SD_CmdResp7Error(SD_HandleTypeDef *hsd) +{ + HAL_SD_ErrorTypedef errorstate = SD_ERROR; + uint32_t timeout = SDIO_CMD0TIMEOUT, tmp; + + tmp = __HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CCRCFAIL | SDIO_FLAG_CMDREND | SDIO_FLAG_CTIMEOUT); + + while((!tmp) && (timeout > 0)) + { + tmp = __HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CCRCFAIL | SDIO_FLAG_CMDREND | SDIO_FLAG_CTIMEOUT); + timeout--; + } + + tmp = __HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CTIMEOUT); + + if((timeout == 0) || tmp) + { + /* Card is not V2.0 compliant or card does not support the set voltage range */ + errorstate = SD_CMD_RSP_TIMEOUT; + + __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_CTIMEOUT); + + return errorstate; + } + + if(__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CMDREND)) + { + /* Card is SD V2.0 compliant */ + errorstate = SD_OK; + + __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_CMDREND); + + return errorstate; + } + + return errorstate; +} + +/** + * @brief Checks for error conditions for R1 response. + * @param hsd: SD handle + * @param SD_CMD: The sent command index + * @retval SD Card error state + */ +static HAL_SD_ErrorTypedef SD_CmdResp1Error(SD_HandleTypeDef *hsd, uint8_t SD_CMD) +{ + HAL_SD_ErrorTypedef errorstate = SD_OK; + uint32_t response_r1; + + while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CCRCFAIL | SDIO_FLAG_CMDREND | SDIO_FLAG_CTIMEOUT)) + { + } + + if(__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CTIMEOUT)) + { + errorstate = SD_CMD_RSP_TIMEOUT; + + __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_CTIMEOUT); + + return errorstate; + } + else if(__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CCRCFAIL)) + { + errorstate = SD_CMD_CRC_FAIL; + + __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_CCRCFAIL); + + return errorstate; + } + else + { + /* No error flag set */ + } + + /* Check response received is of desired command */ + if(SDIO_GetCommandResponse(hsd->Instance) != SD_CMD) + { + errorstate = SD_ILLEGAL_CMD; + + return errorstate; + } + + /* Clear all the static flags */ + __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS); + + /* We have received response, retrieve it for analysis */ + response_r1 = SDIO_GetResponse(SDIO_RESP1); + + if((response_r1 & SD_OCR_ERRORBITS) == SD_ALLZERO) + { + return errorstate; + } + + if((response_r1 & SD_OCR_ADDR_OUT_OF_RANGE) == SD_OCR_ADDR_OUT_OF_RANGE) + { + return(SD_ADDR_OUT_OF_RANGE); + } + + if((response_r1 & SD_OCR_ADDR_MISALIGNED) == SD_OCR_ADDR_MISALIGNED) + { + return(SD_ADDR_MISALIGNED); + } + + if((response_r1 & SD_OCR_BLOCK_LEN_ERR) == SD_OCR_BLOCK_LEN_ERR) + { + return(SD_BLOCK_LEN_ERR); + } + + if((response_r1 & SD_OCR_ERASE_SEQ_ERR) == SD_OCR_ERASE_SEQ_ERR) + { + return(SD_ERASE_SEQ_ERR); + } + + if((response_r1 & SD_OCR_BAD_ERASE_PARAM) == SD_OCR_BAD_ERASE_PARAM) + { + return(SD_BAD_ERASE_PARAM); + } + + if((response_r1 & SD_OCR_WRITE_PROT_VIOLATION) == SD_OCR_WRITE_PROT_VIOLATION) + { + return(SD_WRITE_PROT_VIOLATION); + } + + if((response_r1 & SD_OCR_LOCK_UNLOCK_FAILED) == SD_OCR_LOCK_UNLOCK_FAILED) + { + return(SD_LOCK_UNLOCK_FAILED); + } + + if((response_r1 & SD_OCR_COM_CRC_FAILED) == SD_OCR_COM_CRC_FAILED) + { + return(SD_COM_CRC_FAILED); + } + + if((response_r1 & SD_OCR_ILLEGAL_CMD) == SD_OCR_ILLEGAL_CMD) + { + return(SD_ILLEGAL_CMD); + } + + if((response_r1 & SD_OCR_CARD_ECC_FAILED) == SD_OCR_CARD_ECC_FAILED) + { + return(SD_CARD_ECC_FAILED); + } + + if((response_r1 & SD_OCR_CC_ERROR) == SD_OCR_CC_ERROR) + { + return(SD_CC_ERROR); + } + + if((response_r1 & SD_OCR_GENERAL_UNKNOWN_ERROR) == SD_OCR_GENERAL_UNKNOWN_ERROR) + { + return(SD_GENERAL_UNKNOWN_ERROR); + } + + if((response_r1 & SD_OCR_STREAM_READ_UNDERRUN) == SD_OCR_STREAM_READ_UNDERRUN) + { + return(SD_STREAM_READ_UNDERRUN); + } + + if((response_r1 & SD_OCR_STREAM_WRITE_OVERRUN) == SD_OCR_STREAM_WRITE_OVERRUN) + { + return(SD_STREAM_WRITE_OVERRUN); + } + + if((response_r1 & SD_OCR_CID_CSD_OVERWRITE) == SD_OCR_CID_CSD_OVERWRITE) + { + return(SD_CID_CSD_OVERWRITE); + } + + if((response_r1 & SD_OCR_WP_ERASE_SKIP) == SD_OCR_WP_ERASE_SKIP) + { + return(SD_WP_ERASE_SKIP); + } + + if((response_r1 & SD_OCR_CARD_ECC_DISABLED) == SD_OCR_CARD_ECC_DISABLED) + { + return(SD_CARD_ECC_DISABLED); + } + + if((response_r1 & SD_OCR_ERASE_RESET) == SD_OCR_ERASE_RESET) + { + return(SD_ERASE_RESET); + } + + if((response_r1 & SD_OCR_AKE_SEQ_ERROR) == SD_OCR_AKE_SEQ_ERROR) + { + return(SD_AKE_SEQ_ERROR); + } + + return errorstate; +} + +/** + * @brief Checks for error conditions for R3 (OCR) response. + * @param hsd: SD handle + * @retval SD Card error state + */ +static HAL_SD_ErrorTypedef SD_CmdResp3Error(SD_HandleTypeDef *hsd) +{ + HAL_SD_ErrorTypedef errorstate = SD_OK; + + while (!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CCRCFAIL | SDIO_FLAG_CMDREND | SDIO_FLAG_CTIMEOUT)) + { + } + + if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CTIMEOUT)) + { + errorstate = SD_CMD_RSP_TIMEOUT; + + __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_CTIMEOUT); + + return errorstate; + } + + /* Clear all the static flags */ + __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS); + + return errorstate; +} + +/** + * @brief Checks for error conditions for R2 (CID or CSD) response. + * @param hsd: SD handle + * @retval SD Card error state + */ +static HAL_SD_ErrorTypedef SD_CmdResp2Error(SD_HandleTypeDef *hsd) +{ + HAL_SD_ErrorTypedef errorstate = SD_OK; + + while (!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CCRCFAIL | SDIO_FLAG_CMDREND | SDIO_FLAG_CTIMEOUT)) + { + } + + if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CTIMEOUT)) + { + errorstate = SD_CMD_RSP_TIMEOUT; + + __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_CTIMEOUT); + + return errorstate; + } + else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CCRCFAIL)) + { + errorstate = SD_CMD_CRC_FAIL; + + __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_CCRCFAIL); + + return errorstate; + } + else + { + /* No error flag set */ + } + + /* Clear all the static flags */ + __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS); + + return errorstate; +} + +/** + * @brief Checks for error conditions for R6 (RCA) response. + * @param hsd: SD handle + * @param SD_CMD: The sent command index + * @param pRCA: Pointer to the variable that will contain the SD card relative + * address RCA + * @retval SD Card error state + */ +static HAL_SD_ErrorTypedef SD_CmdResp6Error(SD_HandleTypeDef *hsd, uint8_t SD_CMD, uint16_t *pRCA) +{ + HAL_SD_ErrorTypedef errorstate = SD_OK; + uint32_t response_r1; + + while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CCRCFAIL | SDIO_FLAG_CMDREND | SDIO_FLAG_CTIMEOUT)) + { + } + + if(__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CTIMEOUT)) + { + errorstate = SD_CMD_RSP_TIMEOUT; + + __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_CTIMEOUT); + + return errorstate; + } + else if(__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CCRCFAIL)) + { + errorstate = SD_CMD_CRC_FAIL; + + __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_CCRCFAIL); + + return errorstate; + } + else + { + /* No error flag set */ + } + + /* Check response received is of desired command */ + if(SDIO_GetCommandResponse(hsd->Instance) != SD_CMD) + { + errorstate = SD_ILLEGAL_CMD; + + return errorstate; + } + + /* Clear all the static flags */ + __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS); + + /* We have received response, retrieve it. */ + response_r1 = SDIO_GetResponse(SDIO_RESP1); + + if((response_r1 & (SD_R6_GENERAL_UNKNOWN_ERROR | SD_R6_ILLEGAL_CMD | SD_R6_COM_CRC_FAILED)) == SD_ALLZERO) + { + *pRCA = (uint16_t) (response_r1 >> 16); + + return errorstate; + } + + if((response_r1 & SD_R6_GENERAL_UNKNOWN_ERROR) == SD_R6_GENERAL_UNKNOWN_ERROR) + { + return(SD_GENERAL_UNKNOWN_ERROR); + } + + if((response_r1 & SD_R6_ILLEGAL_CMD) == SD_R6_ILLEGAL_CMD) + { + return(SD_ILLEGAL_CMD); + } + + if((response_r1 & SD_R6_COM_CRC_FAILED) == SD_R6_COM_CRC_FAILED) + { + return(SD_COM_CRC_FAILED); + } + + return errorstate; +} + +/** + * @brief Enables the SDIO wide bus mode. + * @param hsd: SD handle + * @retval SD Card error state + */ +static HAL_SD_ErrorTypedef SD_WideBus_Enable(SD_HandleTypeDef *hsd) +{ + SDIO_CmdInitTypeDef sdio_cmdinitstructure; + HAL_SD_ErrorTypedef errorstate = SD_OK; + + uint32_t scr[2] = {0, 0}; + + if((SDIO_GetResponse(SDIO_RESP1) & SD_CARD_LOCKED) == SD_CARD_LOCKED) + { + errorstate = SD_LOCK_UNLOCK_FAILED; + + return errorstate; + } + + /* Get SCR Register */ + errorstate = SD_FindSCR(hsd, scr); + + if(errorstate != SD_OK) + { + return errorstate; + } + + /* If requested card supports wide bus operation */ + if((scr[1] & SD_WIDE_BUS_SUPPORT) != SD_ALLZERO) + { + /* Send CMD55 APP_CMD with argument as card's RCA.*/ + sdio_cmdinitstructure.Argument = (uint32_t)(hsd->RCA << 16); + sdio_cmdinitstructure.CmdIndex = SD_CMD_APP_CMD; + sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT; + sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO; + sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE; + SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure); + + /* Check for error conditions */ + errorstate = SD_CmdResp1Error(hsd, SD_CMD_APP_CMD); + + if(errorstate != SD_OK) + { + return errorstate; + } + + /* Send ACMD6 APP_CMD with argument as 2 for wide bus mode */ + sdio_cmdinitstructure.Argument = 2; + sdio_cmdinitstructure.CmdIndex = SD_CMD_APP_SD_SET_BUSWIDTH; + SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure); + + /* Check for error conditions */ + errorstate = SD_CmdResp1Error(hsd, SD_CMD_APP_SD_SET_BUSWIDTH); + + if(errorstate != SD_OK) + { + return errorstate; + } + + return errorstate; + } + else + { + errorstate = SD_REQUEST_NOT_APPLICABLE; + + return errorstate; + } +} + +/** + * @brief Disables the SDIO wide bus mode. + * @param hsd: SD handle + * @retval SD Card error state + */ +static HAL_SD_ErrorTypedef SD_WideBus_Disable(SD_HandleTypeDef *hsd) +{ + SDIO_CmdInitTypeDef sdio_cmdinitstructure; + HAL_SD_ErrorTypedef errorstate = SD_OK; + + uint32_t scr[2] = {0, 0}; + + if((SDIO_GetResponse(SDIO_RESP1) & SD_CARD_LOCKED) == SD_CARD_LOCKED) + { + errorstate = SD_LOCK_UNLOCK_FAILED; + + return errorstate; + } + + /* Get SCR Register */ + errorstate = SD_FindSCR(hsd, scr); + + if(errorstate != SD_OK) + { + return errorstate; + } + + /* If requested card supports 1 bit mode operation */ + if((scr[1] & SD_SINGLE_BUS_SUPPORT) != SD_ALLZERO) + { + /* Send CMD55 APP_CMD with argument as card's RCA */ + sdio_cmdinitstructure.Argument = (uint32_t)(hsd->RCA << 16); + sdio_cmdinitstructure.CmdIndex = SD_CMD_APP_CMD; + sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT; + sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO; + sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE; + SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure); + + /* Check for error conditions */ + errorstate = SD_CmdResp1Error(hsd, SD_CMD_APP_CMD); + + if(errorstate != SD_OK) + { + return errorstate; + } + + /* Send ACMD6 APP_CMD with argument as 0 for single bus mode */ + sdio_cmdinitstructure.Argument = 0; + sdio_cmdinitstructure.CmdIndex = SD_CMD_APP_SD_SET_BUSWIDTH; + SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure); + + /* Check for error conditions */ + errorstate = SD_CmdResp1Error(hsd, SD_CMD_APP_SD_SET_BUSWIDTH); + + if(errorstate != SD_OK) + { + return errorstate; + } + + return errorstate; + } + else + { + errorstate = SD_REQUEST_NOT_APPLICABLE; + + return errorstate; + } +} + + +/** + * @brief Finds the SD card SCR register value. + * @param hsd: SD handle + * @param pSCR: pointer to the buffer that will contain the SCR value + * @retval SD Card error state + */ +static HAL_SD_ErrorTypedef SD_FindSCR(SD_HandleTypeDef *hsd, uint32_t *pSCR) +{ + SDIO_CmdInitTypeDef sdio_cmdinitstructure; + SDIO_DataInitTypeDef sdio_datainitstructure; + HAL_SD_ErrorTypedef errorstate = SD_OK; + uint32_t index = 0; + uint32_t tempscr[2] = {0, 0}; + + /* Set Block Size To 8 Bytes */ + /* Send CMD55 APP_CMD with argument as card's RCA */ + sdio_cmdinitstructure.Argument = (uint32_t)8; + sdio_cmdinitstructure.CmdIndex = SD_CMD_SET_BLOCKLEN; + sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT; + sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO; + sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE; + SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure); + + /* Check for error conditions */ + errorstate = SD_CmdResp1Error(hsd, SD_CMD_SET_BLOCKLEN); + + if(errorstate != SD_OK) + { + return errorstate; + } + + /* Send CMD55 APP_CMD with argument as card's RCA */ + sdio_cmdinitstructure.Argument = (uint32_t)((hsd->RCA) << 16); + sdio_cmdinitstructure.CmdIndex = SD_CMD_APP_CMD; + SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure); + + /* Check for error conditions */ + errorstate = SD_CmdResp1Error(hsd, SD_CMD_APP_CMD); + + if(errorstate != SD_OK) + { + return errorstate; + } + sdio_datainitstructure.DataTimeOut = SD_DATATIMEOUT; + sdio_datainitstructure.DataLength = 8; + sdio_datainitstructure.DataBlockSize = SDIO_DATABLOCK_SIZE_8B; + sdio_datainitstructure.TransferDir = SDIO_TRANSFER_DIR_TO_SDIO; + sdio_datainitstructure.TransferMode = SDIO_TRANSFER_MODE_BLOCK; + sdio_datainitstructure.DPSM = SDIO_DPSM_ENABLE; + SDIO_DataConfig(hsd->Instance, &sdio_datainitstructure); + + /* Send ACMD51 SD_APP_SEND_SCR with argument as 0 */ + sdio_cmdinitstructure.Argument = 0; + sdio_cmdinitstructure.CmdIndex = SD_CMD_SD_APP_SEND_SCR; + SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure); + + /* Check for error conditions */ + errorstate = SD_CmdResp1Error(hsd, SD_CMD_SD_APP_SEND_SCR); + + if(errorstate != SD_OK) + { + return errorstate; + } + + while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXOVERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DBCKEND | SDIO_FLAG_STBITERR)) + { + if(__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXDAVL)) + { + *(tempscr + index) = SDIO_ReadFIFO(hsd->Instance); + index++; + } + } + + if(__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_DTIMEOUT)) + { + __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_DTIMEOUT); + + errorstate = SD_DATA_TIMEOUT; + + return errorstate; + } + else if(__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_DCRCFAIL)) + { + __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_DCRCFAIL); + + errorstate = SD_DATA_CRC_FAIL; + + return errorstate; + } + else if(__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXOVERR)) + { + __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_RXOVERR); + + errorstate = SD_RX_OVERRUN; + + return errorstate; + } + else if(__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_STBITERR)) + { + __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_STBITERR); + + errorstate = SD_START_BIT_ERR; + + return errorstate; + } + else + { + /* No error flag set */ + } + + /* Clear all the static flags */ + __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS); + + *(pSCR + 1) = ((tempscr[0] & SD_0TO7BITS) << 24) | ((tempscr[0] & SD_8TO15BITS) << 8) |\ + ((tempscr[0] & SD_16TO23BITS) >> 8) | ((tempscr[0] & SD_24TO31BITS) >> 24); + + *(pSCR) = ((tempscr[1] & SD_0TO7BITS) << 24) | ((tempscr[1] & SD_8TO15BITS) << 8) |\ + ((tempscr[1] & SD_16TO23BITS) >> 8) | ((tempscr[1] & SD_24TO31BITS) >> 24); + + return errorstate; +} + +/** + * @brief Checks if the SD card is in programming state. + * @param hsd: SD handle + * @param pStatus: pointer to the variable that will contain the SD card state + * @retval SD Card error state + */ +static HAL_SD_ErrorTypedef SD_IsCardProgramming(SD_HandleTypeDef *hsd, uint8_t *pStatus) +{ + SDIO_CmdInitTypeDef sdio_cmdinitstructure; + HAL_SD_ErrorTypedef errorstate = SD_OK; + __IO uint32_t responseR1 = 0; + + sdio_cmdinitstructure.Argument = (uint32_t)(hsd->RCA << 16); + sdio_cmdinitstructure.CmdIndex = SD_CMD_SEND_STATUS; + sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT; + sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO; + sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE; + SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure); + + while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CCRCFAIL | SDIO_FLAG_CMDREND | SDIO_FLAG_CTIMEOUT)) + { + } + + if(__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CTIMEOUT)) + { + errorstate = SD_CMD_RSP_TIMEOUT; + + __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_CTIMEOUT); + + return errorstate; + } + else if(__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CCRCFAIL)) + { + errorstate = SD_CMD_CRC_FAIL; + + __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_CCRCFAIL); + + return errorstate; + } + else + { + /* No error flag set */ + } + + /* Check response received is of desired command */ + if((uint32_t)SDIO_GetCommandResponse(hsd->Instance) != SD_CMD_SEND_STATUS) + { + errorstate = SD_ILLEGAL_CMD; + + return errorstate; + } + + /* Clear all the static flags */ + __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS); + + + /* We have received response, retrieve it for analysis */ + responseR1 = SDIO_GetResponse(SDIO_RESP1); + + /* Find out card status */ + *pStatus = (uint8_t)((responseR1 >> 9) & 0x0000000F); + + if((responseR1 & SD_OCR_ERRORBITS) == SD_ALLZERO) + { + return errorstate; + } + + if((responseR1 & SD_OCR_ADDR_OUT_OF_RANGE) == SD_OCR_ADDR_OUT_OF_RANGE) + { + return(SD_ADDR_OUT_OF_RANGE); + } + + if((responseR1 & SD_OCR_ADDR_MISALIGNED) == SD_OCR_ADDR_MISALIGNED) + { + return(SD_ADDR_MISALIGNED); + } + + if((responseR1 & SD_OCR_BLOCK_LEN_ERR) == SD_OCR_BLOCK_LEN_ERR) + { + return(SD_BLOCK_LEN_ERR); + } + + if((responseR1 & SD_OCR_ERASE_SEQ_ERR) == SD_OCR_ERASE_SEQ_ERR) + { + return(SD_ERASE_SEQ_ERR); + } + + if((responseR1 & SD_OCR_BAD_ERASE_PARAM) == SD_OCR_BAD_ERASE_PARAM) + { + return(SD_BAD_ERASE_PARAM); + } + + if((responseR1 & SD_OCR_WRITE_PROT_VIOLATION) == SD_OCR_WRITE_PROT_VIOLATION) + { + return(SD_WRITE_PROT_VIOLATION); + } + + if((responseR1 & SD_OCR_LOCK_UNLOCK_FAILED) == SD_OCR_LOCK_UNLOCK_FAILED) + { + return(SD_LOCK_UNLOCK_FAILED); + } + + if((responseR1 & SD_OCR_COM_CRC_FAILED) == SD_OCR_COM_CRC_FAILED) + { + return(SD_COM_CRC_FAILED); + } + + if((responseR1 & SD_OCR_ILLEGAL_CMD) == SD_OCR_ILLEGAL_CMD) + { + return(SD_ILLEGAL_CMD); + } + + if((responseR1 & SD_OCR_CARD_ECC_FAILED) == SD_OCR_CARD_ECC_FAILED) + { + return(SD_CARD_ECC_FAILED); + } + + if((responseR1 & SD_OCR_CC_ERROR) == SD_OCR_CC_ERROR) + { + return(SD_CC_ERROR); + } + + if((responseR1 & SD_OCR_GENERAL_UNKNOWN_ERROR) == SD_OCR_GENERAL_UNKNOWN_ERROR) + { + return(SD_GENERAL_UNKNOWN_ERROR); + } + + if((responseR1 & SD_OCR_STREAM_READ_UNDERRUN) == SD_OCR_STREAM_READ_UNDERRUN) + { + return(SD_STREAM_READ_UNDERRUN); + } + + if((responseR1 & SD_OCR_STREAM_WRITE_OVERRUN) == SD_OCR_STREAM_WRITE_OVERRUN) + { + return(SD_STREAM_WRITE_OVERRUN); + } + + if((responseR1 & SD_OCR_CID_CSD_OVERWRITE) == SD_OCR_CID_CSD_OVERWRITE) + { + return(SD_CID_CSD_OVERWRITE); + } + + if((responseR1 & SD_OCR_WP_ERASE_SKIP) == SD_OCR_WP_ERASE_SKIP) + { + return(SD_WP_ERASE_SKIP); + } + + if((responseR1 & SD_OCR_CARD_ECC_DISABLED) == SD_OCR_CARD_ECC_DISABLED) + { + return(SD_CARD_ECC_DISABLED); + } + + if((responseR1 & SD_OCR_ERASE_RESET) == SD_OCR_ERASE_RESET) + { + return(SD_ERASE_RESET); + } + + if((responseR1 & SD_OCR_AKE_SEQ_ERROR) == SD_OCR_AKE_SEQ_ERROR) + { + return(SD_AKE_SEQ_ERROR); + } + + return errorstate; +} + +/** + * @} + */ + +#endif /* STM32L151xD || STM32L152xD || STM32L162xD */ +#endif /* HAL_SD_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_smartcard.c b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_smartcard.c new file mode 100755 index 0000000..6c759e9 --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_smartcard.c @@ -0,0 +1,1323 @@ +/** + ****************************************************************************** + * @file stm32l1xx_hal_smartcard.c + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief SMARTCARD HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the SMARTCARD peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral State and Errors functions + * + Peripheral Control functions + * + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The SMARTCARD HAL driver can be used as follows: + + (#) Declare a SMARTCARD_HandleTypeDef handle structure. + (#) Initialize the SMARTCARD low level resources by implementing the HAL_SMARTCARD_MspInit() API: + (##) Enable the interface clock of the USARTx associated to the SMARTCARD. + (##) SMARTCARD pins configuration: + (+++) Enable the clock for the SMARTCARD GPIOs. + (+++) Configure the SMARTCARD pins as alternate function pull-up. + (##) NVIC configuration if you need to use interrupt process (HAL_SMARTCARD_Transmit_IT() + and HAL_SMARTCARD_Receive_IT() APIs): + (+++) Configure the USARTx interrupt priority. + (+++) Enable the NVIC USART IRQ handle. + (##) DMA Configuration if you need to use DMA process (HAL_SMARTCARD_Transmit_DMA() + and HAL_SMARTCARD_Receive_DMA() APIs): + (+++) Declare a DMA handle structure for the Tx/Rx channel. + (+++) Enable the DMAx interface clock. + (+++) Configure the declared DMA handle structure with the required Tx/Rx parameters. + (+++) Configure the DMA Tx/Rx channel. + (+++) Associate the initilalized DMA handle to the SMARTCARD DMA Tx/Rx handle. + (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the DMA Tx/Rx channel. + (+++) Configure the USARTx interrupt priority and enable the NVIC USART IRQ handle + (used for last byte sending completion detection in DMA non circular mode) + + (#) Program the Baud Rate, Word Length , Stop Bit, Parity, Hardware + flow control and Mode(Receiver/Transmitter) in the SMARTCARD Init structure. + + (#) Initialize the SMARTCARD registers by calling the HAL_SMARTCARD_Init() API: + (++) This API configures also the low level Hardware GPIO, CLOCK, CORTEX...etc) + by calling the customed HAL_SMARTCARD_MspInit(&hsc) API. + + -@@- The specific SMARTCARD interrupts (Transmission complete interrupt, + RXNE interrupt and Error Interrupts) will be managed using the macros + __HAL_SMARTCARD_ENABLE_IT() and __HAL_SMARTCARD_DISABLE_IT() inside the transmit and receive process. + + (#) Three operation modes are available within this driver : + + *** Polling mode IO operation *** + ================================= + [..] + (+) Send an amount of data in blocking mode using HAL_SMARTCARD_Transmit() + (+) Receive an amount of data in blocking mode using HAL_SMARTCARD_Receive() + + *** Interrupt mode IO operation *** + =================================== + [..] + (+) Send an amount of data in non blocking mode using HAL_SMARTCARD_Transmit_IT() + (+) At transmission end of transfer HAL_SMARTCARD_TxCpltCallback is executed and user can + add his own code by customization of function pointer HAL_SMARTCARD_TxCpltCallback + (+) Receive an amount of data in non blocking mode using HAL_SMARTCARD_Receive_IT() + (+) At reception end of transfer HAL_SMARTCARD_RxCpltCallback is executed and user can + add his own code by customization of function pointer HAL_SMARTCARD_RxCpltCallback + (+) In case of transfer Error, HAL_SMARTCARD_ErrorCallback() function is executed and user can + add his own code by customization of function pointer HAL_SMARTCARD_ErrorCallback + + *** DMA mode IO operation *** + ============================== + [..] + (+) Send an amount of data in non blocking mode (DMA) using HAL_SMARTCARD_Transmit_DMA() + (+) At transmission end of transfer HAL_SMARTCARD_TxCpltCallback is executed and user can + add his own code by customization of function pointer HAL_SMARTCARD_TxCpltCallback + (+) Receive an amount of data in non blocking mode (DMA) using HAL_SMARTCARD_Receive_DMA() + (+) At reception end of transfer HAL_SMARTCARD_RxCpltCallback is executed and user can + add his own code by customization of function pointer HAL_SMARTCARD_RxCpltCallback + (+) In case of transfer Error, HAL_SMARTCARD_ErrorCallback() function is executed and user can + add his own code by customization of function pointer HAL_SMARTCARD_ErrorCallback + + *** SMARTCARD HAL driver macros list *** + ======================================== + [..] + Below the list of most used macros in SMARTCARD HAL driver. + + (+) __HAL_SMARTCARD_ENABLE: Enable the SMARTCARD peripheral + (+) __HAL_SMARTCARD_DISABLE: Disable the SMARTCARD peripheral + (+) __HAL_SMARTCARD_GET_FLAG : Check whether the specified SMARTCARD flag is set or not + (+) __HAL_SMARTCARD_CLEAR_FLAG : Clear the specified SMARTCARD pending flag + (+) __HAL_SMARTCARD_ENABLE_IT: Enable the specified SMARTCARD interrupt + (+) __HAL_SMARTCARD_DISABLE_IT: Disable the specified SMARTCARD interrupt + (+) __HAL_SMARTCARD_GET_IT_SOURCE: Check whether the specified SMARTCARD interrupt has occurred or not + + [..] + (@) You can refer to the SMARTCARD HAL driver header file for more useful macros + + @endverbatim + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_hal.h" + +/** @addtogroup STM32L1xx_HAL_Driver + * @{ + */ + +/** @defgroup SMARTCARD SMARTCARD + * @brief HAL SMARTCARD module driver + * @{ + */ + +#ifdef HAL_SMARTCARD_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macros --------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @addtogroup SMARTCARD_Private_Functions SMARTCARD Private Functions + * @{ + */ +static HAL_StatusTypeDef SMARTCARD_Transmit_IT(SMARTCARD_HandleTypeDef *hsc); +static HAL_StatusTypeDef SMARTCARD_EndTransmit_IT(SMARTCARD_HandleTypeDef *hsmartcard); +static HAL_StatusTypeDef SMARTCARD_Receive_IT(SMARTCARD_HandleTypeDef *hsc); +static void SMARTCARD_SetConfig (SMARTCARD_HandleTypeDef *hsc); +static void SMARTCARD_DMATransmitCplt(DMA_HandleTypeDef *hdma); +static void SMARTCARD_DMAReceiveCplt(DMA_HandleTypeDef *hdma); +static void SMARTCARD_DMAError(DMA_HandleTypeDef *hdma); +static HAL_StatusTypeDef SMARTCARD_WaitOnFlagUntilTimeout(SMARTCARD_HandleTypeDef *hsc, uint32_t Flag, FlagStatus Status, uint32_t Timeout); +/** + * @} + */ + +/* Exported functions ---------------------------------------------------------*/ + +/** @defgroup SMARTCARD_Exported_Functions SMARTCARD Exported Functions + * @{ + */ + +/** @defgroup SMARTCARD_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + + ============================================================================== + ##### Initialization and Configuration functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to initialize the USART + in Smartcard mode. + [..] + The Smartcard interface is designed to support asynchronous protocol Smartcards as + defined in the ISO 7816-3 standard. + [..] + The USART can provide a clock to the smartcard through the SCLK output. + In smartcard mode, SCLK is not associated to the communication but is simply derived + from the internal peripheral input clock through a 5-bit prescaler. + [..] + (+) For the Smartcard mode only these parameters can be configured: + (++) Baud Rate + (++) Word Length => Should be 9 bits (8 bits + parity) + (++) Stop Bit + (++) Parity: => Should be enabled + (++) USART polarity + (++) USART phase + (++) USART LastBit + (++) Receiver/transmitter modes + (++) Prescaler + (++) GuardTime + (++) NACKState: The Smartcard NACK state + + (+) Recommended SmartCard interface configuration to get the Answer to Reset from the Card: + (++) Word Length = 9 Bits + (++) 1.5 Stop Bit + (++) Even parity + (++) BaudRate = 12096 baud + (++) Tx and Rx enabled + [..] + Please refer to the ISO 7816-3 specification for more details. + + (@) It is also possible to choose 0.5 stop bit for receiving but it is recommended + to use 1.5 stop bits for both transmitting and receiving to avoid switching + between the two configurations. + [..] + The HAL_SMARTCARD_Init() function follows the USART SmartCard configuration + procedure (details for the procedure are available in reference manual (RM0038)). + +@endverbatim + * @{ + */ + +/* + Additionnal remark on the smartcard frame: + +-------------------------------------------------------------+ + | M bit | PCE bit | SMARTCARD frame | + |---------------------|---------------------------------------| + | 1 | 1 | | SB | 8 bit data | PB | STB | | + +-------------------------------------------------------------+ +*/ + +/** + * @brief Initializes the SmartCard mode according to the specified + * parameters in the SMARTCARD_HandleTypeDef and create the associated handle. + * @param hsc: Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARD_Init(SMARTCARD_HandleTypeDef *hsc) +{ + /* Check the SMARTCARD handle allocation */ + if(hsc == NULL) + { + return HAL_ERROR; + } + + /* Check Wordlength, Parity and Stop bits parameters */ + if ( (!(IS_SMARTCARD_WORD_LENGTH(hsc->Init.WordLength))) + ||(!(IS_SMARTCARD_STOPBITS(hsc->Init.StopBits))) + ||(!(IS_SMARTCARD_PARITY(hsc->Init.Parity))) ) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_SMARTCARD_INSTANCE(hsc->Instance)); + assert_param(IS_SMARTCARD_NACK_STATE(hsc->Init.NACKState)); + assert_param(IS_SMARTCARD_PRESCALER(hsc->Init.Prescaler)); + + if(hsc->State == HAL_SMARTCARD_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hsc->Lock = HAL_UNLOCKED; + + /* Init the low level hardware */ + HAL_SMARTCARD_MspInit(hsc); + } + + hsc->State = HAL_SMARTCARD_STATE_BUSY; + + /* Disable the Peripheral */ + __HAL_SMARTCARD_DISABLE(hsc); + + /* Set the Prescaler */ + MODIFY_REG(hsc->Instance->GTPR, USART_GTPR_PSC, hsc->Init.Prescaler); + + /* Set the Guard Time */ + MODIFY_REG(hsc->Instance->GTPR, USART_GTPR_GT, ((hsc->Init.GuardTime)<<8)); + + /* Set the Smartcard Communication parameters */ + SMARTCARD_SetConfig(hsc); + + /* In SmartCard mode, the following bits must be kept cleared: + - LINEN bit in the USART_CR2 register + - HDSEL and IREN bits in the USART_CR3 register.*/ + CLEAR_BIT(hsc->Instance->CR2, USART_CR2_LINEN); + CLEAR_BIT(hsc->Instance->CR3, (USART_CR3_IREN | USART_CR3_HDSEL)); + + /* Enable the Peripharal */ + __HAL_SMARTCARD_ENABLE(hsc); + + /* Configure the Smartcard NACK state */ + MODIFY_REG(hsc->Instance->CR3, USART_CR3_NACK, hsc->Init.NACKState); + + /* Enable the SC mode by setting the SCEN bit in the CR3 register */ + SET_BIT(hsc->Instance->CR3, USART_CR3_SCEN); + + /* Initialize the SMARTCARD state*/ + hsc->ErrorCode = HAL_SMARTCARD_ERROR_NONE; + hsc->State= HAL_SMARTCARD_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the SMARTCARD peripheral + * @param hsc: Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARD_DeInit(SMARTCARD_HandleTypeDef *hsc) +{ + /* Check the SMARTCARD handle allocation */ + if(hsc == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_SMARTCARD_INSTANCE(hsc->Instance)); + + hsc->State = HAL_SMARTCARD_STATE_BUSY; + + /* Disable the Peripheral */ + __HAL_SMARTCARD_DISABLE(hsc); + + hsc->Instance->CR1 = 0x0; + hsc->Instance->CR2 = 0x0; + hsc->Instance->CR3 = 0x0; + hsc->Instance->BRR = 0x0; + hsc->Instance->GTPR = 0x0; + + /* DeInit the low level hardware */ + HAL_SMARTCARD_MspDeInit(hsc); + + hsc->ErrorCode = HAL_SMARTCARD_ERROR_NONE; + hsc->State = HAL_SMARTCARD_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(hsc); + + return HAL_OK; +} + +/** + * @brief SMARTCARD MSP Init. + * @param hsc: Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ +__weak void HAL_SMARTCARD_MspInit(SMARTCARD_HandleTypeDef *hsc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsc); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_SMARTCARD_MspInit can be implemented in the user file + */ +} + +/** + * @brief SMARTCARD MSP DeInit. + * @param hsc: Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ +__weak void HAL_SMARTCARD_MspDeInit(SMARTCARD_HandleTypeDef *hsc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsc); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_SMARTCARD_MspDeInit can be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup SMARTCARD_Exported_Functions_Group2 IO operation functions + * @brief SMARTCARD Transmit and Receive functions + * +@verbatim + ============================================================================== + ##### IO operation functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to manage the SMARTCARD data transfers. + + [..] + (#) Smartcard is a single wire half duplex communication protocol. + The Smartcard interface is designed to support asynchronous protocol Smartcards as + defined in the ISO 7816-3 standard. + (#) The USART should be configured as: + (++) 8 bits plus parity: where M=1 and PCE=1 in the USART_CR1 register + (++) 1.5 stop bits when transmitting and receiving: where STOP=11 in the USART_CR2 register. + + (#) There are two modes of transfer: + (++) Blocking mode: The communication is performed in polling mode. + The HAL status of all data processing is returned by the same function + after finishing transfer. + (++) No-Blocking mode: The communication is performed using Interrupts + or DMA, the relevant API's return the HAL status. + The end of the data processing will be indicated through the + dedicated SMARTCARD IRQ when using Interrupt mode or the DMA IRQ when + using DMA mode. + The HAL_SMARTCARD_TxCpltCallback(), HAL_SMARTCARD_RxCpltCallback() user callbacks + will be executed respectively at the end of the Transmit or Receive process + The HAL_SMARTCARD_ErrorCallback() user callback will be executed when a communication + error is detected. + + (#) Blocking mode APIs are : + (++) HAL_SMARTCARD_Transmit() + (++) HAL_SMARTCARD_Receive() + + (#) Non Blocking mode APIs with Interrupt are : + (++) HAL_SMARTCARD_Transmit_IT() + (++) HAL_SMARTCARD_Receive_IT() + (++) HAL_SMARTCARD_IRQHandler() + + (#) Non Blocking mode functions with DMA are : + (++) HAL_SMARTCARD_Transmit_DMA() + (++) HAL_SMARTCARD_Receive_DMA() + + (#) A set of Transfer Complete Callbacks are provided in non Blocking mode: + (++) HAL_SMARTCARD_TxCpltCallback() + (++) HAL_SMARTCARD_RxCpltCallback() + (++) HAL_SMARTCARD_ErrorCallback() + +@endverbatim + * @{ + */ + +/** + * @brief Sends an amount of data in blocking mode. + * @param hsc: Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @param pData: Pointer to data buffer + * @param Size: Amount of data to be sent + * @param Timeout: Specify timeout value + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARD_Transmit(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + uint32_t tmp_state = 0; + + tmp_state = hsc->State; + if((tmp_state == HAL_SMARTCARD_STATE_READY) || (tmp_state == HAL_SMARTCARD_STATE_BUSY_RX)) + { + if((pData == NULL) || (Size == 0)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hsc); + + hsc->ErrorCode = HAL_SMARTCARD_ERROR_NONE; + /* Check if a non-blocking receive process is ongoing or not */ + if(hsc->State == HAL_SMARTCARD_STATE_BUSY_RX) + { + hsc->State = HAL_SMARTCARD_STATE_BUSY_TX_RX; + } + else + { + hsc->State = HAL_SMARTCARD_STATE_BUSY_TX; + } + + hsc->TxXferSize = Size; + hsc->TxXferCount = Size; + while(hsc->TxXferCount > 0) + { + if(SMARTCARD_WaitOnFlagUntilTimeout(hsc, SMARTCARD_FLAG_TXE, RESET, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + WRITE_REG(hsc->Instance->DR, (*pData++ & (uint8_t)0xFF)); + hsc->TxXferCount--; + } + + if(SMARTCARD_WaitOnFlagUntilTimeout(hsc, SMARTCARD_FLAG_TC, RESET, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + + /* Check if a non-blocking receive process is ongoing or not */ + if(hsc->State == HAL_SMARTCARD_STATE_BUSY_TX_RX) + { + hsc->State = HAL_SMARTCARD_STATE_BUSY_RX; + } + else + { + hsc->State = HAL_SMARTCARD_STATE_READY; + } + /* Process Unlocked */ + __HAL_UNLOCK(hsc); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in blocking mode. + * @param hsc: Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @param pData: Pointer to data buffer + * @param Size: Amount of data to be received + * @param Timeout: Specify timeout value + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARD_Receive(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + uint32_t tmp_state = 0; + + tmp_state = hsc->State; + if((tmp_state == HAL_SMARTCARD_STATE_READY) || (tmp_state == HAL_SMARTCARD_STATE_BUSY_TX)) + { + if((pData == NULL) || (Size == 0)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hsc); + + hsc->ErrorCode = HAL_SMARTCARD_ERROR_NONE; + + /* Check if a non-blocking transmit process is ongoing or not */ + if(hsc->State == HAL_SMARTCARD_STATE_BUSY_TX) + { + hsc->State = HAL_SMARTCARD_STATE_BUSY_TX_RX; + } + else + { + hsc->State = HAL_SMARTCARD_STATE_BUSY_RX; + } + + hsc->RxXferSize = Size; + hsc->RxXferCount = Size; + /* Check the remain data to be received */ + while(hsc->RxXferCount > 0) + { + if(SMARTCARD_WaitOnFlagUntilTimeout(hsc, SMARTCARD_FLAG_RXNE, RESET, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + *pData++ = (uint8_t)(hsc->Instance->DR & (uint8_t)0x00FF); + hsc->RxXferCount--; + } + + /* Check if a non-blocking transmit process is ongoing or not */ + if(hsc->State == HAL_SMARTCARD_STATE_BUSY_TX_RX) + { + hsc->State = HAL_SMARTCARD_STATE_BUSY_TX; + } + else + { + hsc->State = HAL_SMARTCARD_STATE_READY; + } + + /* Process Unlocked */ + __HAL_UNLOCK(hsc); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Sends an amount of data in non-blocking mode. + * @param hsc: Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @param pData: Pointer to data buffer + * @param Size: Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARD_Transmit_IT(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size) +{ + uint32_t tmp_state = 0; + + tmp_state = hsc->State; + if((tmp_state == HAL_SMARTCARD_STATE_READY) || (tmp_state == HAL_SMARTCARD_STATE_BUSY_RX)) + { + if((pData == NULL) || (Size == 0)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hsc); + + hsc->pTxBuffPtr = pData; + hsc->TxXferSize = Size; + hsc->TxXferCount = Size; + + hsc->ErrorCode = HAL_SMARTCARD_ERROR_NONE; + /* Check if a non-blocking receive process is ongoing or not */ + if(hsc->State == HAL_SMARTCARD_STATE_BUSY_RX) + { + hsc->State = HAL_SMARTCARD_STATE_BUSY_TX_RX; + } + else + { + hsc->State = HAL_SMARTCARD_STATE_BUSY_TX; + } + + /* Process Unlocked */ + __HAL_UNLOCK(hsc); + + /* Enable the SMARTCARD Error Interrupt: (Frame error, noise error, overrun error) */ + __HAL_SMARTCARD_ENABLE_IT(hsc, SMARTCARD_IT_ERR); + + /* Enable the SMARTCARD Transmit data register empty Interrupt */ + __HAL_SMARTCARD_ENABLE_IT(hsc, SMARTCARD_IT_TXE); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receives an amount of data in non-blocking mode. + * @param hsc: Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @param pData: Pointer to data buffer + * @param Size: Amount of data to be received + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARD_Receive_IT(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size) +{ + uint32_t tmp_state = 0; + + tmp_state = hsc->State; + if((tmp_state == HAL_SMARTCARD_STATE_READY) || (tmp_state == HAL_SMARTCARD_STATE_BUSY_TX)) + { + if((pData == NULL) || (Size == 0)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hsc); + + hsc->pRxBuffPtr = pData; + hsc->RxXferSize = Size; + hsc->RxXferCount = Size; + + hsc->ErrorCode = HAL_SMARTCARD_ERROR_NONE; + /* Check if a non-blocking transmit process is ongoing or not */ + if(hsc->State == HAL_SMARTCARD_STATE_BUSY_TX) + { + hsc->State = HAL_SMARTCARD_STATE_BUSY_TX_RX; + } + else + { + hsc->State = HAL_SMARTCARD_STATE_BUSY_RX; + } + + /* Process Unlocked */ + __HAL_UNLOCK(hsc); + + /* Enable the SMARTCARD Data Register not empty Interrupt */ + __HAL_SMARTCARD_ENABLE_IT(hsc, SMARTCARD_IT_RXNE); + + /* Enable the SMARTCARD Parity Error Interrupt */ + __HAL_SMARTCARD_ENABLE_IT(hsc, SMARTCARD_IT_PE); + + /* Enable the SMARTCARD Error Interrupt: (Frame error, noise error, overrun error) */ + __HAL_SMARTCARD_ENABLE_IT(hsc, SMARTCARD_IT_ERR); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Sends an amount of data in non-blocking mode. + * @param hsc: Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @param pData: Pointer to data buffer + * @param Size: Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARD_Transmit_DMA(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size) +{ + uint32_t *tmp = 0; + uint32_t tmp_state = 0; + + tmp_state = hsc->State; + if((tmp_state == HAL_SMARTCARD_STATE_READY) || (tmp_state == HAL_SMARTCARD_STATE_BUSY_RX)) + { + if((pData == NULL) || (Size == 0)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hsc); + + hsc->pTxBuffPtr = pData; + hsc->TxXferSize = Size; + hsc->TxXferCount = Size; + + hsc->ErrorCode = HAL_SMARTCARD_ERROR_NONE; + /* Check if a non-blocking receive process is ongoing or not */ + if(hsc->State == HAL_SMARTCARD_STATE_BUSY_RX) + { + hsc->State = HAL_SMARTCARD_STATE_BUSY_TX_RX; + } + else + { + hsc->State = HAL_SMARTCARD_STATE_BUSY_TX; + } + + /* Set the SMARTCARD DMA transfer complete callback */ + hsc->hdmatx->XferCpltCallback = SMARTCARD_DMATransmitCplt; + + /* Set the DMA error callback */ + hsc->hdmatx->XferErrorCallback = SMARTCARD_DMAError; + + /* Enable the SMARTCARD transmit DMA channel */ + tmp = (uint32_t*)&pData; + HAL_DMA_Start_IT(hsc->hdmatx, *(uint32_t*)tmp, (uint32_t)&hsc->Instance->DR, Size); + + /* Clear the TC flag in the SR register by writing 0 to it */ + __HAL_SMARTCARD_CLEAR_FLAG(hsc, SMARTCARD_FLAG_TC); + + /* Enable the DMA transfer for transmit request by setting the DMAT bit + in the SMARTCARD CR3 register */ + SET_BIT(hsc->Instance->CR3,USART_CR3_DMAT); + + /* Process Unlocked */ + __HAL_UNLOCK(hsc); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in non-blocking mode. + * @param hsc: Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @param pData: Pointer to data buffer + * @param Size: Amount of data to be received + * @note When the SMARTCARD parity is enabled (PCE = 1) the data received contain the parity bit. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARD_Receive_DMA(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size) +{ + uint32_t *tmp = 0; + uint32_t tmp_state = 0; + + tmp_state = hsc->State; + if((tmp_state == HAL_SMARTCARD_STATE_READY) || (tmp_state == HAL_SMARTCARD_STATE_BUSY_TX)) + { + if((pData == NULL) || (Size == 0)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hsc); + + hsc->pRxBuffPtr = pData; + hsc->RxXferSize = Size; + + hsc->ErrorCode = HAL_SMARTCARD_ERROR_NONE; + /* Check if a non-blocking transmit process is ongoing or not */ + if(hsc->State == HAL_SMARTCARD_STATE_BUSY_TX) + { + hsc->State = HAL_SMARTCARD_STATE_BUSY_TX_RX; + } + else + { + hsc->State = HAL_SMARTCARD_STATE_BUSY_RX; + } + + /* Set the SMARTCARD DMA transfer complete callback */ + hsc->hdmarx->XferCpltCallback = SMARTCARD_DMAReceiveCplt; + + /* Set the DMA error callback */ + hsc->hdmarx->XferErrorCallback = SMARTCARD_DMAError; + + /* Enable the DMA channel */ + tmp = (uint32_t*)&pData; + HAL_DMA_Start_IT(hsc->hdmarx, (uint32_t)&hsc->Instance->DR, *(uint32_t*)tmp, Size); + + /* Enable the DMA transfer for the receiver request by setting the DMAR bit + in the SMARTCARD CR3 register */ + SET_BIT(hsc->Instance->CR3,USART_CR3_DMAR); + + /* Process Unlocked */ + __HAL_UNLOCK(hsc); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief This function handles SMARTCARD interrupt request. + * @param hsc: Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ +void HAL_SMARTCARD_IRQHandler(SMARTCARD_HandleTypeDef *hsc) +{ + uint32_t tmp_flag = 0, tmp_it_source = 0; + + tmp_flag = __HAL_SMARTCARD_GET_FLAG(hsc, SMARTCARD_FLAG_PE); + tmp_it_source = __HAL_SMARTCARD_GET_IT_SOURCE(hsc, SMARTCARD_IT_PE); + /* SMARTCARD parity error interrupt occurred -----------------------------------*/ + if((tmp_flag != RESET) && (tmp_it_source != RESET)) + { + hsc->ErrorCode |= HAL_SMARTCARD_ERROR_PE; + } + + tmp_flag = __HAL_SMARTCARD_GET_FLAG(hsc, SMARTCARD_FLAG_FE); + tmp_it_source = __HAL_SMARTCARD_GET_IT_SOURCE(hsc, SMARTCARD_IT_ERR); + /* SMARTCARD frame error interrupt occurred ------------------------------------*/ + if((tmp_flag != RESET) && (tmp_it_source != RESET)) + { + hsc->ErrorCode |= HAL_SMARTCARD_ERROR_FE; + } + + tmp_flag = __HAL_SMARTCARD_GET_FLAG(hsc, SMARTCARD_FLAG_NE); + /* SMARTCARD noise error interrupt occurred ------------------------------------*/ + if((tmp_flag != RESET) && (tmp_it_source != RESET)) + { + hsc->ErrorCode |= HAL_SMARTCARD_ERROR_NE; + } + + tmp_flag = __HAL_SMARTCARD_GET_FLAG(hsc, SMARTCARD_FLAG_ORE); + /* SMARTCARD Over-Run interrupt occurred ---------------------------------------*/ + if((tmp_flag != RESET) && (tmp_it_source != RESET)) + { + hsc->ErrorCode |= HAL_SMARTCARD_ERROR_ORE; + } + + tmp_flag = __HAL_SMARTCARD_GET_FLAG(hsc, SMARTCARD_FLAG_RXNE); + tmp_it_source = __HAL_SMARTCARD_GET_IT_SOURCE(hsc, SMARTCARD_IT_RXNE); + /* SMARTCARD in mode Receiver --------------------------------------------------*/ + if((tmp_flag != RESET) && (tmp_it_source != RESET)) + { + SMARTCARD_Receive_IT(hsc); + } + + tmp_flag = __HAL_SMARTCARD_GET_FLAG(hsc, SMARTCARD_FLAG_TXE); + tmp_it_source = __HAL_SMARTCARD_GET_IT_SOURCE(hsc, SMARTCARD_IT_TXE); + /* SMARTCARD in mode Transmitter -----------------------------------------------*/ + if((tmp_flag != RESET) && (tmp_it_source != RESET)) + { + SMARTCARD_Transmit_IT(hsc); + } + + tmp_flag = __HAL_SMARTCARD_GET_FLAG(hsc, SMARTCARD_FLAG_TC); + tmp_it_source = __HAL_SMARTCARD_GET_IT_SOURCE(hsc, SMARTCARD_IT_TC); + /* SMARTCARD in mode Transmitter (transmission end) ------------------------*/ + if((tmp_flag != RESET) && (tmp_it_source != RESET)) + { + SMARTCARD_EndTransmit_IT(hsc); + } + + /* Call the Error call Back in case of Errors */ + if(hsc->ErrorCode != HAL_SMARTCARD_ERROR_NONE) + { + /* Clear all the error flag at once */ + __HAL_SMARTCARD_CLEAR_PEFLAG(hsc); + + /* Set the SMARTCARD state ready to be able to start again the process */ + hsc->State= HAL_SMARTCARD_STATE_READY; + HAL_SMARTCARD_ErrorCallback(hsc); + } +} + +/** + * @brief Tx Transfer completed callback. + * @param hsc: Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ + __weak void HAL_SMARTCARD_TxCpltCallback(SMARTCARD_HandleTypeDef *hsc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsc); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_SMARTCARD_TxCpltCallback can be implemented in the user file + */ +} + +/** + * @brief Rx Transfer completed callback. + * @param hsc: Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ +__weak void HAL_SMARTCARD_RxCpltCallback(SMARTCARD_HandleTypeDef *hsc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsc); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_SMARTCARD_RxCpltCallback can be implemented in the user file + */ +} + +/** + * @brief SMARTCARD error callback. + * @param hsc: Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ + __weak void HAL_SMARTCARD_ErrorCallback(SMARTCARD_HandleTypeDef *hsc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsc); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_SMARTCARD_ErrorCallback can be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup SMARTCARD_Exported_Functions_Group3 Peripheral State and Errors functions + * @brief SMARTCARD State and Errors functions + * +@verbatim + ============================================================================== + ##### Peripheral State and Errors functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to return the State of SmartCard + communication process and also return Peripheral Errors occurred during communication process + (+) HAL_SMARTCARD_GetState() API can be helpful to check in run-time the state + of the SMARTCARD peripheral. + (+) HAL_SMARTCARD_GetError() check in run-time errors that could be occurred during + communication. + +@endverbatim + * @{ + */ + +/** + * @brief Returns the SMARTCARD state. + * @param hsc: Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval HAL state + */ +HAL_SMARTCARD_StateTypeDef HAL_SMARTCARD_GetState(SMARTCARD_HandleTypeDef *hsc) +{ + return hsc->State; +} + +/** + * @brief Return the SMARTCARD error code + * @param hsc: Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval SMARTCARD Error Code + */ +uint32_t HAL_SMARTCARD_GetError(SMARTCARD_HandleTypeDef *hsc) +{ + return hsc->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup SMARTCARD_Private_Functions SMARTCARD Private Functions + * @brief SMARTCARD Private functions + * @{ + */ +/** + * @brief DMA SMARTCARD transmit process complete callback. + * @param hdma: Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void SMARTCARD_DMATransmitCplt(DMA_HandleTypeDef *hdma) +{ + SMARTCARD_HandleTypeDef* hsc = ( SMARTCARD_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; + + hsc->TxXferCount = 0; + + /* Disable the DMA transfer for transmit request by setting the DMAT bit + in the SMARTCARD CR3 register */ + CLEAR_BIT(hsc->Instance->CR3, USART_CR3_DMAT); + + /* Enable the SMARTCARD Transmit Complete Interrupt */ + __HAL_SMARTCARD_ENABLE_IT(hsc, SMARTCARD_IT_TC); +} + +/** + * @brief DMA SMARTCARD receive process complete callback. + * @param hdma: Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void SMARTCARD_DMAReceiveCplt(DMA_HandleTypeDef *hdma) +{ + SMARTCARD_HandleTypeDef* hsc = ( SMARTCARD_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; + + hsc->RxXferCount = 0; + + /* Disable the DMA transfer for the receiver request by setting the DMAR bit + in the USART CR3 register */ + CLEAR_BIT(hsc->Instance->CR3, USART_CR3_DMAR); + + /* Check if a non-blocking transmit process is ongoing or not */ + if(hsc->State == HAL_SMARTCARD_STATE_BUSY_TX_RX) + { + hsc->State = HAL_SMARTCARD_STATE_BUSY_TX; + } + else + { + hsc->State = HAL_SMARTCARD_STATE_READY; + } + + HAL_SMARTCARD_RxCpltCallback(hsc); +} + +/** + * @brief DMA SMARTCARD communication error callback. + * @param hdma: Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void SMARTCARD_DMAError(DMA_HandleTypeDef *hdma) +{ + SMARTCARD_HandleTypeDef* hsc = ( SMARTCARD_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; + + hsc->RxXferCount = 0; + hsc->TxXferCount = 0; + hsc->ErrorCode = HAL_SMARTCARD_ERROR_DMA; + hsc->State= HAL_SMARTCARD_STATE_READY; + + HAL_SMARTCARD_ErrorCallback(hsc); +} + +/** + * @brief This function handles SMARTCARD Communication Timeout. + * @param hsc: Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @param Flag: specifies the SMARTCARD flag to check. + * @param Status: The new Flag status (SET or RESET). + * @param Timeout: Timeout duration + * @retval HAL status + */ +static HAL_StatusTypeDef SMARTCARD_WaitOnFlagUntilTimeout(SMARTCARD_HandleTypeDef *hsc, uint32_t Flag, FlagStatus Status, uint32_t Timeout) +{ + uint32_t tickstart = 0; + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Wait until flag is set */ + if(Status == RESET) + { + while(__HAL_SMARTCARD_GET_FLAG(hsc, Flag) == RESET) + { + /* Check for the Timeout */ + if(Timeout != HAL_MAX_DELAY) + { + if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout)) + { + /* Disable TXE and RXNE interrupts for the interrupt process */ + __HAL_SMARTCARD_DISABLE_IT(hsc, SMARTCARD_IT_TXE); + __HAL_SMARTCARD_DISABLE_IT(hsc, SMARTCARD_IT_RXNE); + + hsc->State= HAL_SMARTCARD_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsc); + + return HAL_TIMEOUT; + } + } + } + } + else + { + while(__HAL_SMARTCARD_GET_FLAG(hsc, Flag) != RESET) + { + /* Check for the Timeout */ + if(Timeout != HAL_MAX_DELAY) + { + if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout)) + { + /* Disable TXE and RXNE interrupts for the interrupt process */ + __HAL_SMARTCARD_DISABLE_IT(hsc, SMARTCARD_IT_TXE); + __HAL_SMARTCARD_DISABLE_IT(hsc, SMARTCARD_IT_RXNE); + + hsc->State= HAL_SMARTCARD_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsc); + + return HAL_TIMEOUT; + } + } + } + } + return HAL_OK; +} + +/** + * @brief Send an amount of data in non-blocking mode. + * @param hsc: Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * Function called under interruption only, once + * interruptions have been enabled by HAL_SMARTCARD_Transmit_IT() + * @retval HAL status + */ +static HAL_StatusTypeDef SMARTCARD_Transmit_IT(SMARTCARD_HandleTypeDef *hsc) +{ + uint32_t tmp_state = 0; + + tmp_state = hsc->State; + if((tmp_state == HAL_SMARTCARD_STATE_BUSY_TX) || (tmp_state == HAL_SMARTCARD_STATE_BUSY_TX_RX)) + { + WRITE_REG(hsc->Instance->DR, (*hsc->pTxBuffPtr++ & (uint8_t)0xFF)); + + if(--hsc->TxXferCount == 0) + { + /* Disable the SMARTCARD Transmit Data Register Empty Interrupt */ + __HAL_SMARTCARD_DISABLE_IT(hsc, SMARTCARD_IT_TXE); + + /* Enable the SMARTCARD Transmit Complete Interrupt */ + __HAL_SMARTCARD_ENABLE_IT(hsc, SMARTCARD_IT_TC); + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + + +/** + * @brief Wraps up transmission in non blocking mode. + * @param hsmartcard: pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval HAL status + */ +static HAL_StatusTypeDef SMARTCARD_EndTransmit_IT(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Disable the SMARTCARD Transmit Complete Interrupt */ + __HAL_SMARTCARD_DISABLE_IT(hsmartcard, SMARTCARD_IT_TC); + + /* Check if a receive process is ongoing or not */ + if(hsmartcard->State == HAL_SMARTCARD_STATE_BUSY_TX_RX) + { + hsmartcard->State = HAL_SMARTCARD_STATE_BUSY_RX; + } + else + { + /* Disable the SMARTCARD Error Interrupt: (Frame error, noise error, overrun error) */ + __HAL_SMARTCARD_DISABLE_IT(hsmartcard, SMARTCARD_IT_ERR); + + hsmartcard->State = HAL_SMARTCARD_STATE_READY; + } + + HAL_SMARTCARD_TxCpltCallback(hsmartcard); + + return HAL_OK; +} + + +/** + * @brief Receive an amount of data in non-blocking mode. + * @param hsc: Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval HAL status + */ +static HAL_StatusTypeDef SMARTCARD_Receive_IT(SMARTCARD_HandleTypeDef *hsc) +{ + uint32_t tmp_state = 0; + + tmp_state = hsc->State; + if((tmp_state == HAL_SMARTCARD_STATE_BUSY_RX) || (tmp_state == HAL_SMARTCARD_STATE_BUSY_TX_RX)) + { + *hsc->pRxBuffPtr++ = (uint8_t)(hsc->Instance->DR & (uint8_t)0xFF); + + if(--hsc->RxXferCount == 0) + { + __HAL_SMARTCARD_DISABLE_IT(hsc, SMARTCARD_IT_RXNE); + + /* Disable the SMARTCARD Parity Error Interrupt */ + __HAL_SMARTCARD_DISABLE_IT(hsc, SMARTCARD_IT_PE); + + /* Disable the SMARTCARD Error Interrupt: (Frame error, noise error, overrun error) */ + __HAL_SMARTCARD_DISABLE_IT(hsc, SMARTCARD_IT_ERR); + + /* Check if a non-blocking transmit process is ongoing or not */ + if(hsc->State == HAL_SMARTCARD_STATE_BUSY_TX_RX) + { + hsc->State = HAL_SMARTCARD_STATE_BUSY_TX; + } + else + { + hsc->State = HAL_SMARTCARD_STATE_READY; + } + + HAL_SMARTCARD_RxCpltCallback(hsc); + + return HAL_OK; + } + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Configures the SMARTCARD peripheral. + * @param hsc: Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ +static void SMARTCARD_SetConfig(SMARTCARD_HandleTypeDef *hsc) +{ + /* Check the parameters */ + assert_param(IS_SMARTCARD_POLARITY(hsc->Init.CLKPolarity)); + assert_param(IS_SMARTCARD_PHASE(hsc->Init.CLKPhase)); + assert_param(IS_SMARTCARD_LASTBIT(hsc->Init.CLKLastBit)); + assert_param(IS_SMARTCARD_BAUDRATE(hsc->Init.BaudRate)); + assert_param(IS_SMARTCARD_WORD_LENGTH(hsc->Init.WordLength)); + assert_param(IS_SMARTCARD_STOPBITS(hsc->Init.StopBits)); + assert_param(IS_SMARTCARD_PARITY(hsc->Init.Parity)); + assert_param(IS_SMARTCARD_MODE(hsc->Init.Mode)); + assert_param(IS_SMARTCARD_NACK_STATE(hsc->Init.NACKState)); + + /* The LBCL, CPOL and CPHA bits have to be selected when both the transmitter and the + receiver are disabled (TE=RE=0) to ensure that the clock pulses function correctly. */ + CLEAR_BIT(hsc->Instance->CR1, (uint32_t)(USART_CR1_TE | USART_CR1_RE)); + + /*------ SMARTCARD-associated USART registers setting : CR2 Configuration ------*/ + /* Clear CLKEN, CPOL, CPHA and LBCL bits */ + /* Configure the SMARTCARD Clock, CPOL, CPHA and LastBit -----------------------*/ + /* Set CPOL bit according to hsc->Init.CLKPolarity value */ + /* Set CPHA bit according to hsc->Init.CLKPhase value */ + /* Set LBCL bit according to hsc->Init.CLKLastBit value */ + MODIFY_REG(hsc->Instance->CR2, + ((uint32_t)(USART_CR2_CPHA | USART_CR2_CPOL | USART_CR2_CLKEN | USART_CR2_LBCL)), + ((uint32_t)(USART_CR2_CLKEN | hsc->Init.CLKPolarity | hsc->Init.CLKPhase| hsc->Init.CLKLastBit)) ); + + /* Set Stop Bits: Set STOP[13:12] bits according to hsc->Init.StopBits value */ + MODIFY_REG(hsc->Instance->CR2, USART_CR2_STOP,(uint32_t)(hsc->Init.StopBits)); + + /*------ SMARTCARD-associated USART registers setting : CR1 Configuration ------*/ + /* Clear M, PCE, PS, TE and RE bits */ + /* Configure the SMARTCARD Word Length, Parity and mode: + Set the M according to hsc->Init.WordLength value (forced to 1 as 9B data frame should be selected) + Set PCE and PS bits according to hsc->Init.Parity value (PCE bit forced to 1 as parity control should always be enabled) + Set TE and RE bits according to hsc->Init.Mode value */ + MODIFY_REG(hsc->Instance->CR1, + ((uint32_t)(USART_CR1_M | USART_CR1_PCE | USART_CR1_PS | USART_CR1_TE | USART_CR1_RE)), + ((uint32_t)(USART_CR1_M | USART_CR1_PCE | hsc->Init.Parity | hsc->Init.Mode)) ); + + /*------ SMARTCARD-associated USART registers setting : CR3 Configuration ------*/ + /* Clear CTSE and RTSE bits */ + CLEAR_BIT(hsc->Instance->CR3, (USART_CR3_RTSE | USART_CR3_CTSE)); + + /*------ SMARTCARD-associated USART registers setting : BRR Configuration ------*/ + if(hsc->Instance == USART1) + { + hsc->Instance->BRR = SMARTCARD_BRR(HAL_RCC_GetPCLK2Freq(), hsc->Init.BaudRate); + } + else + { + hsc->Instance->BRR = SMARTCARD_BRR(HAL_RCC_GetPCLK1Freq(), hsc->Init.BaudRate); + } +} + +/** + * @} + */ + +#endif /* HAL_SMARTCARD_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_spi.c b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_spi.c new file mode 100755 index 0000000..8eeebc0 --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_spi.c @@ -0,0 +1,2269 @@ +/** + ****************************************************************************** + * @file stm32l1xx_hal_spi.c + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief SPI HAL module driver. + * + * This file provides firmware functions to manage the following + * functionalities of the Serial Peripheral Interface (SPI) peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral Control functions + * + Peripheral State functions + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The SPI HAL driver can be used as follows: + + (#) Declare a SPI_HandleTypeDef handle structure, for example: + SPI_HandleTypeDef hspi; + + (#)Initialize the SPI low level resources by implementing the HAL_SPI_MspInit ()API: + (##) Enable the SPIx interface clock + (##) SPI pins configuration + (+++) Enable the clock for the SPI GPIOs + (+++) Configure these SPI pins as alternate function push-pull + (##) NVIC configuration if you need to use interrupt process + (+++) Configure the SPIx interrupt priority + (+++) Enable the NVIC SPI IRQ handle + (##) DMA Configuration if you need to use DMA process + (+++) Declare a DMA_HandleTypeDef handle structure for the transmit or receive Channel + (+++) Enable the DMAx clock + (+++) Configure the DMA handle parameters + (+++) Configure the DMA Tx or Rx Channel + (+++) Associate the initilalized hdma_tx(or _rx) handle to the hspi DMA Tx (or Rx) handle + (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the DMA Tx or Rx Channel + + (#) Program the Mode, Direction , Data size, Baudrate Prescaler, NSS + management, Clock polarity and phase, FirstBit and CRC configuration in the hspi Init structure. + + (#) Initialize the SPI registers by calling the HAL_SPI_Init() API: + (++) This API configures also the low level Hardware GPIO, CLOCK, CORTEX...etc) + by calling the customed HAL_SPI_MspInit() API. + [..] + Circular mode restriction: + (#) The DMA circular mode cannot be used when the SPI is configured in these modes: + (##) Master 2Lines RxOnly + (##) Master 1Line Rx + (#) The CRC feature is not managed when the DMA circular mode is enabled + (#) When the SPI DMA Pause/Stop features are used, we must use the following APIs + the HAL_SPI_DMAPause()/ HAL_SPI_DMAStop() only under the SPI callbacks + + + + @endverbatim + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_hal.h" + +/** @addtogroup STM32L1xx_HAL_Driver + * @{ + */ + +/** @defgroup SPI SPI + * @brief SPI HAL module driver + * @{ + */ + +#ifdef HAL_SPI_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup SPI_Private_Constants SPI Private Constants + * @{ + */ +#define SPI_TIMEOUT_VALUE 10 +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup SPI_Private_Functions SPI Private Functions + * @{ + */ + +static void SPI_TxCloseIRQHandler(struct __SPI_HandleTypeDef *hspi); +static void SPI_TxISR(struct __SPI_HandleTypeDef *hspi); +static void SPI_RxCloseIRQHandler(struct __SPI_HandleTypeDef *hspi); +static void SPI_2LinesRxISR(struct __SPI_HandleTypeDef *hspi); +static void SPI_RxISR(struct __SPI_HandleTypeDef *hspi); +static void SPI_DMATransmitCplt(struct __DMA_HandleTypeDef *hdma); +static void SPI_DMAReceiveCplt(struct __DMA_HandleTypeDef *hdma); +static void SPI_DMATransmitReceiveCplt(struct __DMA_HandleTypeDef *hdma); +static void SPI_DMAHalfTransmitCplt(struct __DMA_HandleTypeDef *hdma); +static void SPI_DMAHalfReceiveCplt(struct __DMA_HandleTypeDef *hdma); +static void SPI_DMAHalfTransmitReceiveCplt(struct __DMA_HandleTypeDef *hdma); +static void SPI_DMAError(struct __DMA_HandleTypeDef *hdma); +static HAL_StatusTypeDef SPI_WaitOnFlagUntilTimeout(struct __SPI_HandleTypeDef *hspi, uint32_t Flag, FlagStatus Status, uint32_t Timeout); +/** + * @} + */ + +/* Exported functions ---------------------------------------------------------*/ + +/** @defgroup SPI_Exported_Functions SPI Exported Functions + * @{ + */ + +/** @defgroup SPI_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] This subsection provides a set of functions allowing to initialize and + de-initialiaze the SPIx peripheral: + + (+) User must implement HAL_SPI_MspInit() function in which he configures + all related peripherals resources (CLOCK, GPIO, DMA, IT and NVIC ). + + (+) Call the function HAL_SPI_Init() to configure the selected device with + the selected configuration: + (++) Mode + (++) Direction + (++) Data Size + (++) Clock Polarity and Phase + (++) NSS Management + (++) BaudRate Prescaler + (++) FirstBit + (++) TIMode + (++) CRC Calculation + (++) CRC Polynomial if CRC enabled + + (+) Call the function HAL_SPI_DeInit() to restore the default configuration + of the selected SPIx periperal. + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the SPI according to the specified parameters + * in the SPI_InitTypeDef and create the associated handle. + * @param hspi: pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval HAL status + */ +__weak HAL_StatusTypeDef HAL_SPI_Init(SPI_HandleTypeDef *hspi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hspi); + + return HAL_ERROR; +} + +/** + * @brief DeInitializes the SPI peripheral + * @param hspi: pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_DeInit(SPI_HandleTypeDef *hspi) +{ + /* Check the SPI handle allocation */ + if(hspi == NULL) + { + return HAL_ERROR; + } + + /* Disable the SPI Peripheral Clock */ + __HAL_SPI_DISABLE(hspi); + + /* DeInit the low level hardware: GPIO, CLOCK, NVIC... */ + HAL_SPI_MspDeInit(hspi); + + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + hspi->State = HAL_SPI_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(hspi); + + return HAL_OK; +} + +/** + * @brief SPI MSP Init + * @param hspi: pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ + __weak void HAL_SPI_MspInit(SPI_HandleTypeDef *hspi) + { + /* Prevent unused argument(s) compilation warning */ + UNUSED(hspi); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_SPI_MspInit could be implenetd in the user file + */ +} + +/** + * @brief SPI MSP DeInit + * @param hspi: pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ + __weak void HAL_SPI_MspDeInit(SPI_HandleTypeDef *hspi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hspi); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_SPI_MspDeInit could be implenetd in the user file + */ +} + +/** + * @} + */ + +/** @defgroup SPI_Exported_Functions_Group2 IO operation functions + * @brief Data transfers functions + * +@verbatim + ============================================================================== + ##### IO operation functions ##### + =============================================================================== + This subsection provides a set of functions allowing to manage the SPI + data transfers. + + [..] The SPI supports master and slave mode : + + (#) There are two modes of transfer: + (++) Blocking mode: The communication is performed in polling mode. + The HAL status of all data processing is returned by the same function + after finishing transfer. + (++) No-Blocking mode: The communication is performed using Interrupts + or DMA, These APIs return the HAL status. + The end of the data processing will be indicated through the + dedicated SPI IRQ when using Interrupt mode or the DMA IRQ when + using DMA mode. + The HAL_SPI_TxCpltCallback(), HAL_SPI_RxCpltCallback() and HAL_SPI_TxRxCpltCallback() user callbacks + will be executed respectivelly at the end of the transmit or Receive process + The HAL_SPI_ErrorCallback()user callback will be executed when a communication error is detected + + (#) APIs provided for these 2 transfer modes (Blocking mode or Non blocking mode using either Interrupt or DMA) + exist for 1Line (simplex) and 2Lines (full duplex) modes. + +@endverbatim + * @{ + */ + +/** + * @brief Transmit an amount of data in blocking mode + * @param hspi: pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @param pData: pointer to data buffer + * @param Size: amount of data to be sent + * @param Timeout: Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_Transmit(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + + if(hspi->State == HAL_SPI_STATE_READY) + { + if((pData == NULL ) || (Size == 0)) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_SPI_DIRECTION_2LINES_OR_1LINE(hspi->Init.Direction)); + + /* Process Locked */ + __HAL_LOCK(hspi); + + /* Configure communication */ + hspi->State = HAL_SPI_STATE_BUSY_TX; + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + + hspi->pTxBuffPtr = pData; + hspi->TxXferSize = Size; + hspi->TxXferCount = Size; + + /*Init field not used in handle to zero */ + hspi->TxISR = 0; + hspi->RxISR = 0; + hspi->pRxBuffPtr = NULL; + hspi->RxXferSize = 0; + hspi->RxXferCount = 0; + + /* Reset CRC Calculation */ + if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + SPI_RESET_CRC(hspi); + } + + if(hspi->Init.Direction == SPI_DIRECTION_1LINE) + { + /* Configure communication direction : 1Line */ + SPI_1LINE_TX(hspi); + } + + /* Check if the SPI is already enabled */ + if((hspi->Instance->CR1 &SPI_CR1_SPE) != SPI_CR1_SPE) + { + /* Enable SPI peripheral */ + __HAL_SPI_ENABLE(hspi); + } + + /* Transmit data in 8 Bit mode */ + if(hspi->Init.DataSize == SPI_DATASIZE_8BIT) + { + if((hspi->Init.Mode == SPI_MODE_SLAVE)|| (hspi->TxXferCount == 0x01)) + { + hspi->Instance->DR = (*hspi->pTxBuffPtr++); + hspi->TxXferCount--; + } + while(hspi->TxXferCount > 0) + { + /* Wait until TXE flag is set to send data */ + if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_TXE, RESET, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + hspi->Instance->DR = (*hspi->pTxBuffPtr++); + hspi->TxXferCount--; + } + /* Enable CRC Transmission */ + if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); + } + } + /* Transmit data in 16 Bit mode */ + else + { + if((hspi->Init.Mode == SPI_MODE_SLAVE) || (hspi->TxXferCount == 0x01)) + { + hspi->Instance->DR = *((uint16_t*)hspi->pTxBuffPtr); + hspi->pTxBuffPtr+=2; + hspi->TxXferCount--; + } + while(hspi->TxXferCount > 0) + { + /* Wait until TXE flag is set to send data */ + if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_TXE, RESET, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + hspi->Instance->DR = *((uint16_t*)hspi->pTxBuffPtr); + hspi->pTxBuffPtr+=2; + hspi->TxXferCount--; + } + /* Enable CRC Transmission */ + if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); + } + } + + /* Wait until TXE flag is set to send data */ + if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_TXE, RESET, Timeout) != HAL_OK) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); + return HAL_TIMEOUT; + } + + /* Wait until Busy flag is reset before disabling SPI */ + if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_BSY, SET, Timeout) != HAL_OK) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); + return HAL_TIMEOUT; + } + + /* Clear OVERUN flag in 2 Lines communication mode because received is not read */ + if(hspi->Init.Direction == SPI_DIRECTION_2LINES) + { + __HAL_SPI_CLEAR_OVRFLAG(hspi); + } + + hspi->State = HAL_SPI_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hspi); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in blocking mode + * @param hspi: pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @param pData: pointer to data buffer + * @param Size: amount of data to be sent + * @param Timeout: Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_Receive(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + __IO uint16_t tmpreg = 0; + + if(hspi->State == HAL_SPI_STATE_READY) + { + if((pData == NULL ) || (Size == 0)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hspi); + + /* Configure communication */ + hspi->State = HAL_SPI_STATE_BUSY_RX; + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + + hspi->pRxBuffPtr = pData; + hspi->RxXferSize = Size; + hspi->RxXferCount = Size; + + /*Init field not used in handle to zero */ + hspi->RxISR = 0; + hspi->TxISR = 0; + hspi->pTxBuffPtr = NULL; + hspi->TxXferSize = 0; + hspi->TxXferCount = 0; + + /* Configure communication direction : 1Line */ + if(hspi->Init.Direction == SPI_DIRECTION_1LINE) + { + SPI_1LINE_RX(hspi); + } + + /* Reset CRC Calculation */ + if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + SPI_RESET_CRC(hspi); + } + + if((hspi->Init.Mode == SPI_MODE_MASTER) && (hspi->Init.Direction == SPI_DIRECTION_2LINES)) + { + /* Process Unlocked */ + __HAL_UNLOCK(hspi); + + /* Call transmit-receive function to send Dummy data on Tx line and generate clock on CLK line */ + return HAL_SPI_TransmitReceive(hspi, pData, pData, Size, Timeout); + } + + /* Check if the SPI is already enabled */ + if((hspi->Instance->CR1 &SPI_CR1_SPE) != SPI_CR1_SPE) + { + /* Enable SPI peripheral */ + __HAL_SPI_ENABLE(hspi); + } + + /* Receive data in 8 Bit mode */ + if(hspi->Init.DataSize == SPI_DATASIZE_8BIT) + { + while(hspi->RxXferCount > 1) + { + /* Wait until RXNE flag is set */ + if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_RXNE, RESET, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + + (*hspi->pRxBuffPtr++) = hspi->Instance->DR; + hspi->RxXferCount--; + } + /* Enable CRC Transmission */ + if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); + } + } + /* Receive data in 16 Bit mode */ + else + { + while(hspi->RxXferCount > 1) + { + /* Wait until RXNE flag is set to read data */ + if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_RXNE, RESET, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + + *((uint16_t*)hspi->pRxBuffPtr) = hspi->Instance->DR; + hspi->pRxBuffPtr+=2; + hspi->RxXferCount--; + } + /* Enable CRC Transmission */ + if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); + } + } + + /* Wait until RXNE flag is set */ + if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_RXNE, RESET, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + + /* Receive last data in 8 Bit mode */ + if(hspi->Init.DataSize == SPI_DATASIZE_8BIT) + { + (*hspi->pRxBuffPtr++) = hspi->Instance->DR; + } + /* Receive last data in 16 Bit mode */ + else + { + *((uint16_t*)hspi->pRxBuffPtr) = hspi->Instance->DR; + hspi->pRxBuffPtr+=2; + } + hspi->RxXferCount--; + + /* Wait until RXNE flag is set: CRC Received */ + if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_RXNE, RESET, Timeout) != HAL_OK) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + return HAL_TIMEOUT; + } + + /* Read CRC to Flush RXNE flag */ + tmpreg = hspi->Instance->DR; + UNUSED(tmpreg); + } + + if((hspi->Init.Mode == SPI_MODE_MASTER)&&((hspi->Init.Direction == SPI_DIRECTION_1LINE)||(hspi->Init.Direction == SPI_DIRECTION_2LINES_RXONLY))) + { + /* Disable SPI peripheral */ + __HAL_SPI_DISABLE(hspi); + } + + hspi->State = HAL_SPI_STATE_READY; + + /* Check if CRC error occurred */ + if((hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) && (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR) != RESET)) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + + /* Reset CRC Calculation */ + SPI_RESET_CRC(hspi); + + /* Process Unlocked */ + __HAL_UNLOCK(hspi); + + return HAL_ERROR; + } + + /* Process Unlocked */ + __HAL_UNLOCK(hspi); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Transmit and Receive an amount of data in blocking mode + * @param hspi: pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @param pTxData: pointer to transmission data buffer + * @param pRxData: pointer to reception data buffer to be + * @param Size: amount of data to be sent + * @param Timeout: Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_TransmitReceive(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size, uint32_t Timeout) +{ + __IO uint16_t tmpreg = 0; + + if((hspi->State == HAL_SPI_STATE_READY) || (hspi->State == HAL_SPI_STATE_BUSY_RX)) + { + if((pTxData == NULL ) || (pRxData == NULL ) || (Size == 0)) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_SPI_DIRECTION_2LINES(hspi->Init.Direction)); + + /* Process Locked */ + __HAL_LOCK(hspi); + + /* Don't overwrite in case of HAL_SPI_STATE_BUSY_RX */ + if(hspi->State == HAL_SPI_STATE_READY) + { + hspi->State = HAL_SPI_STATE_BUSY_TX_RX; + } + + /* Configure communication */ + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + + hspi->pRxBuffPtr = pRxData; + hspi->RxXferSize = Size; + hspi->RxXferCount = Size; + + hspi->pTxBuffPtr = pTxData; + hspi->TxXferSize = Size; + hspi->TxXferCount = Size; + + /*Init field not used in handle to zero */ + hspi->RxISR = 0; + hspi->TxISR = 0; + + /* Reset CRC Calculation */ + if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + SPI_RESET_CRC(hspi); + } + + /* Check if the SPI is already enabled */ + if((hspi->Instance->CR1 &SPI_CR1_SPE) != SPI_CR1_SPE) + { + /* Enable SPI peripheral */ + __HAL_SPI_ENABLE(hspi); + } + + /* Transmit and Receive data in 16 Bit mode */ + if(hspi->Init.DataSize == SPI_DATASIZE_16BIT) + { + if((hspi->Init.Mode == SPI_MODE_SLAVE) || ((hspi->Init.Mode == SPI_MODE_MASTER) && (hspi->TxXferCount == 0x01))) + { + hspi->Instance->DR = *((uint16_t*)hspi->pTxBuffPtr); + hspi->pTxBuffPtr+=2; + hspi->TxXferCount--; + } + if(hspi->TxXferCount == 0) + { + /* Enable CRC Transmission */ + if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); + } + + /* Wait until RXNE flag is set */ + if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_RXNE, RESET, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + + *((uint16_t*)hspi->pRxBuffPtr) = hspi->Instance->DR; + hspi->pRxBuffPtr+=2; + hspi->RxXferCount--; + } + else + { + while(hspi->TxXferCount > 0) + { + /* Wait until TXE flag is set to send data */ + if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_TXE, RESET, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + + hspi->Instance->DR = *((uint16_t*)hspi->pTxBuffPtr); + hspi->pTxBuffPtr+=2; + hspi->TxXferCount--; + + /* Enable CRC Transmission */ + if((hspi->TxXferCount == 0) && (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)) + { + SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); + } + + /* Wait until RXNE flag is set */ + if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_RXNE, RESET, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + + *((uint16_t*)hspi->pRxBuffPtr) = hspi->Instance->DR; + hspi->pRxBuffPtr+=2; + hspi->RxXferCount--; + } + /* Receive the last byte */ + if(hspi->Init.Mode == SPI_MODE_SLAVE) + { + /* Wait until RXNE flag is set */ + if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_RXNE, RESET, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + + *((uint16_t*)hspi->pRxBuffPtr) = hspi->Instance->DR; + hspi->pRxBuffPtr+=2; + hspi->RxXferCount--; + } + } + } + /* Transmit and Receive data in 8 Bit mode */ + else + { + if((hspi->Init.Mode == SPI_MODE_SLAVE) || ((hspi->Init.Mode == SPI_MODE_MASTER) && (hspi->TxXferCount == 0x01))) + { + hspi->Instance->DR = (*hspi->pTxBuffPtr++); + hspi->TxXferCount--; + } + if(hspi->TxXferCount == 0) + { + /* Enable CRC Transmission */ + if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); + } + + /* Wait until RXNE flag is set */ + if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_RXNE, RESET, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + + (*hspi->pRxBuffPtr) = hspi->Instance->DR; + hspi->RxXferCount--; + } + else + { + while(hspi->TxXferCount > 0) + { + /* Wait until TXE flag is set to send data */ + if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_TXE, RESET, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + + hspi->Instance->DR = (*hspi->pTxBuffPtr++); + hspi->TxXferCount--; + + /* Enable CRC Transmission */ + if((hspi->TxXferCount == 0) && (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)) + { + SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); + } + + /* Wait until RXNE flag is set */ + if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_RXNE, RESET, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + + (*hspi->pRxBuffPtr++) = hspi->Instance->DR; + hspi->RxXferCount--; + } + if(hspi->Init.Mode == SPI_MODE_SLAVE) + { + /* Wait until RXNE flag is set */ + if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_RXNE, RESET, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + + (*hspi->pRxBuffPtr++) = hspi->Instance->DR; + hspi->RxXferCount--; + } + } + } + + /* Read CRC from DR to close CRC calculation process */ + if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + /* Wait until RXNE flag is set */ + if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_RXNE, RESET, Timeout) != HAL_OK) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + return HAL_TIMEOUT; + } + /* Read CRC */ + tmpreg = hspi->Instance->DR; + UNUSED(tmpreg); + } + + /* Wait until Busy flag is reset before disabling SPI */ + if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_BSY, SET, Timeout) != HAL_OK) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); + return HAL_TIMEOUT; + } + + hspi->State = HAL_SPI_STATE_READY; + + /* Check if CRC error occurred */ + if((hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) && (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR) != RESET)) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + + /* Reset CRC Calculation */ + if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + SPI_RESET_CRC(hspi); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hspi); + + return HAL_ERROR; + } + + /* Process Unlocked */ + __HAL_UNLOCK(hspi); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Transmit an amount of data in no-blocking mode with Interrupt + * @param hspi: pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @param pData: pointer to data buffer + * @param Size: amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_Transmit_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size) +{ + if(hspi->State == HAL_SPI_STATE_READY) + { + if((pData == NULL) || (Size == 0)) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_SPI_DIRECTION_2LINES_OR_1LINE(hspi->Init.Direction)); + + /* Process Locked */ + __HAL_LOCK(hspi); + + /* Configure communication */ + hspi->State = HAL_SPI_STATE_BUSY_TX; + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + + hspi->TxISR = &SPI_TxISR; + hspi->pTxBuffPtr = pData; + hspi->TxXferSize = Size; + hspi->TxXferCount = Size; + + /*Init field not used in handle to zero */ + hspi->RxISR = 0; + hspi->pRxBuffPtr = NULL; + hspi->RxXferSize = 0; + hspi->RxXferCount = 0; + + /* Configure communication direction : 1Line */ + if(hspi->Init.Direction == SPI_DIRECTION_1LINE) + { + SPI_1LINE_TX(hspi); + } + + /* Reset CRC Calculation */ + if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + SPI_RESET_CRC(hspi); + } + + if (hspi->Init.Direction == SPI_DIRECTION_2LINES) + { + __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_TXE)); + }else + { + /* Enable TXE and ERR interrupt */ + __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_TXE | SPI_IT_ERR)); + } + /* Process Unlocked */ + __HAL_UNLOCK(hspi); + + /* Check if the SPI is already enabled */ + if((hspi->Instance->CR1 &SPI_CR1_SPE) != SPI_CR1_SPE) + { + /* Enable SPI peripheral */ + __HAL_SPI_ENABLE(hspi); + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in no-blocking mode with Interrupt + * @param hspi: pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @param pData: pointer to data buffer + * @param Size: amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_Receive_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size) +{ + if(hspi->State == HAL_SPI_STATE_READY) + { + if((pData == NULL) || (Size == 0)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hspi); + + /* Configure communication */ + hspi->State = HAL_SPI_STATE_BUSY_RX; + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + + hspi->RxISR = &SPI_RxISR; + hspi->pRxBuffPtr = pData; + hspi->RxXferSize = Size; + hspi->RxXferCount = Size ; + + /*Init field not used in handle to zero */ + hspi->TxISR = 0; + hspi->pTxBuffPtr = NULL; + hspi->TxXferSize = 0; + hspi->TxXferCount = 0; + + /* Configure communication direction : 1Line */ + if(hspi->Init.Direction == SPI_DIRECTION_1LINE) + { + SPI_1LINE_RX(hspi); + } + else if((hspi->Init.Direction == SPI_DIRECTION_2LINES) && (hspi->Init.Mode == SPI_MODE_MASTER)) + { + /* Process Unlocked */ + __HAL_UNLOCK(hspi); + + /* Call transmit-receive function to send Dummy data on Tx line and generate clock on CLK line */ + return HAL_SPI_TransmitReceive_IT(hspi, pData, pData, Size); + } + + /* Reset CRC Calculation */ + if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + SPI_RESET_CRC(hspi); + } + + /* Enable TXE and ERR interrupt */ + __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_RXNE | SPI_IT_ERR)); + + /* Process Unlocked */ + __HAL_UNLOCK(hspi); + + /* Note : The SPI must be enabled after unlocking current process + to avoid the risk of SPI interrupt handle execution before current + process unlock */ + + /* Check if the SPI is already enabled */ + if((hspi->Instance->CR1 &SPI_CR1_SPE) != SPI_CR1_SPE) + { + /* Enable SPI peripheral */ + __HAL_SPI_ENABLE(hspi); + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Transmit and Receive an amount of data in no-blocking mode with Interrupt + * @param hspi: pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @param pTxData: pointer to transmission data buffer + * @param pRxData: pointer to reception data buffer to be + * @param Size: amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_TransmitReceive_IT(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size) +{ + + if((hspi->State == HAL_SPI_STATE_READY) || \ + ((hspi->Init.Mode == SPI_MODE_MASTER) && (hspi->Init.Direction == SPI_DIRECTION_2LINES) && (hspi->State == HAL_SPI_STATE_BUSY_RX))) + { + if((pTxData == NULL ) || (pRxData == NULL ) || (Size == 0)) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_SPI_DIRECTION_2LINES(hspi->Init.Direction)); + + /* Process locked */ + __HAL_LOCK(hspi); + + /* Don't overwrite in case of HAL_SPI_STATE_BUSY_RX */ + if(hspi->State != HAL_SPI_STATE_BUSY_RX) + { + hspi->State = HAL_SPI_STATE_BUSY_TX_RX; + } + + /* Configure communication */ + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + + hspi->TxISR = &SPI_TxISR; + hspi->pTxBuffPtr = pTxData; + hspi->TxXferSize = Size; + hspi->TxXferCount = Size; + + hspi->RxISR = &SPI_2LinesRxISR; + hspi->pRxBuffPtr = pRxData; + hspi->RxXferSize = Size; + hspi->RxXferCount = Size; + + /* Reset CRC Calculation */ + if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + SPI_RESET_CRC(hspi); + } + + /* Enable TXE, RXNE and ERR interrupt */ + __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_TXE | SPI_IT_RXNE | SPI_IT_ERR)); + + /* Process Unlocked */ + __HAL_UNLOCK(hspi); + + /* Check if the SPI is already enabled */ + if((hspi->Instance->CR1 &SPI_CR1_SPE) != SPI_CR1_SPE) + { + /* Enable SPI peripheral */ + __HAL_SPI_ENABLE(hspi); + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Transmit an amount of data in no-blocking mode with DMA + * @param hspi: pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @param pData: pointer to data buffer + * @param Size: amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_Transmit_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size) +{ + if(hspi->State == HAL_SPI_STATE_READY) + { + if((pData == NULL) || (Size == 0)) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_SPI_DIRECTION_2LINES_OR_1LINE(hspi->Init.Direction)); + + /* Process Locked */ + __HAL_LOCK(hspi); + + /* Configure communication */ + hspi->State = HAL_SPI_STATE_BUSY_TX; + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + + hspi->pTxBuffPtr = pData; + hspi->TxXferSize = Size; + hspi->TxXferCount = Size; + + /*Init field not used in handle to zero */ + hspi->TxISR = 0; + hspi->RxISR = 0; + hspi->pRxBuffPtr = NULL; + hspi->RxXferSize = 0; + hspi->RxXferCount = 0; + + /* Configure communication direction : 1Line */ + if(hspi->Init.Direction == SPI_DIRECTION_1LINE) + { + SPI_1LINE_TX(hspi); + } + + /* Reset CRC Calculation */ + if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + SPI_RESET_CRC(hspi); + } + + /* Set the SPI TxDMA Half transfer complete callback */ + hspi->hdmatx->XferHalfCpltCallback = SPI_DMAHalfTransmitCplt; + + /* Set the SPI TxDMA transfer complete callback */ + hspi->hdmatx->XferCpltCallback = SPI_DMATransmitCplt; + + /* Set the DMA error callback */ + hspi->hdmatx->XferErrorCallback = SPI_DMAError; + + /* Enable the Tx DMA Channel */ + HAL_DMA_Start_IT(hspi->hdmatx, (uint32_t)hspi->pTxBuffPtr, (uint32_t)&hspi->Instance->DR, hspi->TxXferCount); + + /* Enable Tx DMA Request */ + SET_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN); + + /* Process Unlocked */ + __HAL_UNLOCK(hspi); + + /* Check if the SPI is already enabled */ + if((hspi->Instance->CR1 &SPI_CR1_SPE) != SPI_CR1_SPE) + { + /* Enable SPI peripheral */ + __HAL_SPI_ENABLE(hspi); + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in no-blocking mode with DMA + * @param hspi: pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @param pData: pointer to data buffer + * @note When the CRC feature is enabled the pData Length must be Size + 1. + * @param Size: amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_Receive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size) +{ + if(hspi->State == HAL_SPI_STATE_READY) + { + if((pData == NULL) || (Size == 0)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hspi); + + /* Configure communication */ + hspi->State = HAL_SPI_STATE_BUSY_RX; + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + + hspi->pRxBuffPtr = pData; + hspi->RxXferSize = Size; + hspi->RxXferCount = Size; + + /*Init field not used in handle to zero */ + hspi->RxISR = 0; + hspi->TxISR = 0; + hspi->pTxBuffPtr = NULL; + hspi->TxXferSize = 0; + hspi->TxXferCount = 0; + + /* Configure communication direction : 1Line */ + if(hspi->Init.Direction == SPI_DIRECTION_1LINE) + { + SPI_1LINE_RX(hspi); + } + else if((hspi->Init.Direction == SPI_DIRECTION_2LINES)&&(hspi->Init.Mode == SPI_MODE_MASTER)) + { + /* Process Unlocked */ + __HAL_UNLOCK(hspi); + + /* Call transmit-receive function to send Dummy data on Tx line and generate clock on CLK line */ + return HAL_SPI_TransmitReceive_DMA(hspi, pData, pData, Size); + } + + /* Reset CRC Calculation */ + if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + SPI_RESET_CRC(hspi); + } + + /* Set the SPI RxDMA Half transfer complete callback */ + hspi->hdmarx->XferHalfCpltCallback = SPI_DMAHalfReceiveCplt; + + /* Set the SPI Rx DMA transfer complete callback */ + hspi->hdmarx->XferCpltCallback = SPI_DMAReceiveCplt; + + /* Set the DMA error callback */ + hspi->hdmarx->XferErrorCallback = SPI_DMAError; + + /* Enable the Rx DMA Channel */ + HAL_DMA_Start_IT(hspi->hdmarx, (uint32_t)&hspi->Instance->DR, (uint32_t)hspi->pRxBuffPtr, hspi->RxXferCount); + + /* Enable Rx DMA Request */ + SET_BIT(hspi->Instance->CR2, SPI_CR2_RXDMAEN); + + /* Process Unlocked */ + __HAL_UNLOCK(hspi); + + /* Check if the SPI is already enabled */ + if((hspi->Instance->CR1 &SPI_CR1_SPE) != SPI_CR1_SPE) + { + /* Enable SPI peripheral */ + __HAL_SPI_ENABLE(hspi); + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Transmit and Receive an amount of data in no-blocking mode with DMA + * @param hspi: pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @param pTxData: pointer to transmission data buffer + * @param pRxData: pointer to reception data buffer + * @note When the CRC feature is enabled the pRxData Length must be Size + 1 + * @param Size: amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_TransmitReceive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size) +{ + if((hspi->State == HAL_SPI_STATE_READY) || \ + ((hspi->Init.Mode == SPI_MODE_MASTER) && (hspi->Init.Direction == SPI_DIRECTION_2LINES) && (hspi->State == HAL_SPI_STATE_BUSY_RX))) + { + if((pTxData == NULL ) || (pRxData == NULL ) || (Size == 0)) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_SPI_DIRECTION_2LINES(hspi->Init.Direction)); + + /* Process locked */ + __HAL_LOCK(hspi); + + /* Don't overwrite in case of HAL_SPI_STATE_BUSY_RX */ + if(hspi->State != HAL_SPI_STATE_BUSY_RX) + { + hspi->State = HAL_SPI_STATE_BUSY_TX_RX; + } + + /* Configure communication */ + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + + hspi->pTxBuffPtr = (uint8_t*)pTxData; + hspi->TxXferSize = Size; + hspi->TxXferCount = Size; + + hspi->pRxBuffPtr = (uint8_t*)pRxData; + hspi->RxXferSize = Size; + hspi->RxXferCount = Size; + + /*Init field not used in handle to zero */ + hspi->RxISR = 0; + hspi->TxISR = 0; + + /* Reset CRC Calculation */ + if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + SPI_RESET_CRC(hspi); + } + + /* Check if we are in Rx only or in Rx/Tx Mode and configure the DMA transfer complete callback */ + if(hspi->State == HAL_SPI_STATE_BUSY_RX) + { + /* Set the SPI Rx DMA Half transfer complete callback */ + hspi->hdmarx->XferHalfCpltCallback = SPI_DMAHalfReceiveCplt; + + hspi->hdmarx->XferCpltCallback = SPI_DMAReceiveCplt; + } + else + { + /* Set the SPI Tx/Rx DMA Half transfer complete callback */ + hspi->hdmarx->XferHalfCpltCallback = SPI_DMAHalfTransmitReceiveCplt; + + hspi->hdmarx->XferCpltCallback = SPI_DMATransmitReceiveCplt; + } + + /* Set the DMA error callback */ + hspi->hdmarx->XferErrorCallback = SPI_DMAError; + + /* Enable the Rx DMA Channel */ + HAL_DMA_Start_IT(hspi->hdmarx, (uint32_t)&hspi->Instance->DR, (uint32_t)hspi->pRxBuffPtr, hspi->RxXferCount); + + /* Enable Rx DMA Request */ + SET_BIT(hspi->Instance->CR2, SPI_CR2_RXDMAEN); + + /* Set the SPI Tx DMA transfer complete callback as NULL because the communication closing + is performed in DMA reception complete callback */ + if(hspi->State == HAL_SPI_STATE_BUSY_TX_RX) + { + /* Set the DMA error callback */ + hspi->hdmatx->XferErrorCallback = SPI_DMAError; + } + else + { + hspi->hdmatx->XferErrorCallback = NULL; + } + + /* Enable the Tx DMA Channel */ + HAL_DMA_Start_IT(hspi->hdmatx, (uint32_t)hspi->pTxBuffPtr, (uint32_t)&hspi->Instance->DR, hspi->TxXferCount); + + /* Check if the SPI is already enabled */ + if((hspi->Instance->CR1 &SPI_CR1_SPE) != SPI_CR1_SPE) + { + /* Enable SPI peripheral */ + __HAL_SPI_ENABLE(hspi); + } + + /* Enable Tx DMA Request */ + SET_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN); + + /* Process Unlocked */ + __HAL_UNLOCK(hspi); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + + +/** + * @brief Pauses the DMA Transfer. + * @param hspi: pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for the specified SPI module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_DMAPause(SPI_HandleTypeDef *hspi) +{ + /* Process Locked */ + __HAL_LOCK(hspi); + + /* Disable the SPI DMA Tx & Rx requests */ + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN); + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_RXDMAEN); + + /* Process Unlocked */ + __HAL_UNLOCK(hspi); + + return HAL_OK; +} + +/** + * @brief Resumes the DMA Transfer. + * @param hspi: pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for the specified SPI module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_DMAResume(SPI_HandleTypeDef *hspi) +{ + /* Process Locked */ + __HAL_LOCK(hspi); + + /* Enable the SPI DMA Tx & Rx requests */ + SET_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN); + SET_BIT(hspi->Instance->CR2, SPI_CR2_RXDMAEN); + + /* Process Unlocked */ + __HAL_UNLOCK(hspi); + + return HAL_OK; +} + +/** + * @brief Stops the DMA Transfer. + * @param hspi: pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_DMAStop(SPI_HandleTypeDef *hspi) +{ + /* The Lock is not implemented on this API to allow the user application + to call the HAL SPI API under callbacks HAL_SPI_TxCpltCallback() or HAL_SPI_RxCpltCallback() or HAL_SPI_TxRxCpltCallback(): + when calling HAL_DMA_Abort() API the DMA TX/RX Transfer complete interrupt is generated + and the correspond call back is executed HAL_SPI_TxCpltCallback() or HAL_SPI_RxCpltCallback() or HAL_SPI_TxRxCpltCallback() + */ + + /* Abort the SPI DMA tx Channel */ + if(hspi->hdmatx != NULL) + { + HAL_DMA_Abort(hspi->hdmatx); + } + /* Abort the SPI DMA rx Channel */ + if(hspi->hdmarx != NULL) + { + HAL_DMA_Abort(hspi->hdmarx); + } + + /* Disable the SPI DMA Tx & Rx requests */ + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN); + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_RXDMAEN); + + hspi->State = HAL_SPI_STATE_READY; + + return HAL_OK; +} + +/** + * @brief This function handles SPI interrupt request. + * @param hspi: pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval HAL status + */ +void HAL_SPI_IRQHandler(SPI_HandleTypeDef *hspi) +{ + /* SPI in mode Receiver and Overrun not occurred ---------------------------*/ + if((__HAL_SPI_GET_IT_SOURCE(hspi, SPI_IT_RXNE) != RESET) && (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_RXNE) != RESET) && (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_OVR) == RESET)) + { + hspi->RxISR(hspi); + return; + } + + /* SPI in mode Tramitter ---------------------------------------------------*/ + if((__HAL_SPI_GET_IT_SOURCE(hspi, SPI_IT_TXE) != RESET) && (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_TXE) != RESET)) + { + hspi->TxISR(hspi); + return; + } + + if(__HAL_SPI_GET_IT_SOURCE(hspi, SPI_IT_ERR) != RESET) + { + /* SPI CRC error interrupt occurred ---------------------------------------*/ + if(__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR) != RESET) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + __HAL_SPI_CLEAR_CRCERRFLAG(hspi); + } + /* SPI Mode Fault error interrupt occurred --------------------------------*/ + if(__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_MODF) != RESET) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_MODF); + __HAL_SPI_CLEAR_MODFFLAG(hspi); + } + + /* SPI Overrun error interrupt occurred -----------------------------------*/ + if(__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_OVR) != RESET) + { + if(hspi->State != HAL_SPI_STATE_BUSY_TX) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_OVR); + __HAL_SPI_CLEAR_OVRFLAG(hspi); + } + } + + /* SPI Frame error interrupt occurred -------------------------------------*/ + if(__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_FRE) != RESET) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FRE); + __HAL_SPI_CLEAR_FREFLAG(hspi); + } + + /* Call the Error call Back in case of Errors */ + if(hspi->ErrorCode!=HAL_SPI_ERROR_NONE) + { + __HAL_SPI_DISABLE_IT(hspi, SPI_IT_RXNE | SPI_IT_TXE | SPI_IT_ERR); + hspi->State = HAL_SPI_STATE_READY; + HAL_SPI_ErrorCallback(hspi); + } + } +} + +/** + * @brief Tx Transfer completed callbacks + * @param hspi: pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +__weak void HAL_SPI_TxCpltCallback(SPI_HandleTypeDef *hspi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hspi); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_SPI_TxCpltCallback could be implenetd in the user file + */ +} + +/** + * @brief Rx Transfer completed callbacks + * @param hspi: pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +__weak void HAL_SPI_RxCpltCallback(SPI_HandleTypeDef *hspi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hspi); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_SPI_RxCpltCallback() could be implenetd in the user file + */ +} + +/** + * @brief Tx and Rx Transfer completed callbacks + * @param hspi: pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +__weak void HAL_SPI_TxRxCpltCallback(SPI_HandleTypeDef *hspi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hspi); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_SPI_TxRxCpltCallback() could be implenetd in the user file + */ +} + +/** + * @brief Tx Half Transfer completed callbacks + * @param hspi: pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +__weak void HAL_SPI_TxHalfCpltCallback(SPI_HandleTypeDef *hspi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hspi); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_SPI_TxHalfCpltCallback could be implenetd in the user file + */ +} + +/** + * @brief Rx Half Transfer completed callbacks + * @param hspi: pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +__weak void HAL_SPI_RxHalfCpltCallback(SPI_HandleTypeDef *hspi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hspi); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_SPI_RxHalfCpltCallback() could be implenetd in the user file + */ +} + +/** + * @brief Tx and Rx Transfer completed callbacks + * @param hspi: pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +__weak void HAL_SPI_TxRxHalfCpltCallback(SPI_HandleTypeDef *hspi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hspi); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_SPI_TxRxHalfCpltCallback() could be implenetd in the user file + */ +} + +/** + * @brief SPI error callbacks + * @param hspi: pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ + __weak void HAL_SPI_ErrorCallback(SPI_HandleTypeDef *hspi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hspi); + + /* NOTE : - This function Should not be modified, when the callback is needed, + the HAL_SPI_ErrorCallback() could be implenetd in the user file. + - The ErrorCode parameter in the hspi handle is updated by the SPI processes + and user can use HAL_SPI_GetError() API to check the latest error occurred. + */ +} + +/** + * @} + */ + +/** @defgroup SPI_Exported_Functions_Group3 Peripheral State and Errors functions + * @brief SPI control functions + * +@verbatim + =============================================================================== + ##### Peripheral State and Errors functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the SPI. + (+) HAL_SPI_GetState() API can be helpful to check in run-time the state of the SPI peripheral + (+) HAL_SPI_GetError() check in run-time Errors occurring during communication +@endverbatim + * @{ + */ + +/** + * @brief Return the SPI state + * @param hspi: pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval HAL state + */ +HAL_SPI_StateTypeDef HAL_SPI_GetState(SPI_HandleTypeDef *hspi) +{ + return hspi->State; +} + +/** + * @brief Return the SPI error code + * @param hspi: pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval SPI Error Code + */ +uint32_t HAL_SPI_GetError(SPI_HandleTypeDef *hspi) +{ + return hspi->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + + + +/** @addtogroup SPI_Private_Functions + * @{ + */ + + + /** + * @brief Interrupt Handler to close Tx transfer + * @param hspi: pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval void + */ +static void SPI_TxCloseIRQHandler(struct __SPI_HandleTypeDef *hspi) +{ + /* Wait until TXE flag is set to send data */ + if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_TXE, RESET, SPI_TIMEOUT_VALUE) != HAL_OK) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); + } + + /* Disable TXE interrupt */ + __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_TXE )); + + /* Disable ERR interrupt if Receive process is finished */ + if(__HAL_SPI_GET_IT_SOURCE(hspi, SPI_IT_RXNE) == RESET) + { + __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_ERR)); + + /* Wait until Busy flag is reset before disabling SPI */ + if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_BSY, SET, SPI_TIMEOUT_VALUE) != HAL_OK) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); + } + + /* Clear OVERUN flag in 2 Lines communication mode because received is not read */ + if(hspi->Init.Direction == SPI_DIRECTION_2LINES) + { + __HAL_SPI_CLEAR_OVRFLAG(hspi); + } + + /* Check if Errors has been detected during transfer */ + if(hspi->ErrorCode == HAL_SPI_ERROR_NONE) + { + /* Check if we are in Tx or in Rx/Tx Mode */ + if(hspi->State == HAL_SPI_STATE_BUSY_TX_RX) + { + /* Set state to READY before run the Callback Complete */ + hspi->State = HAL_SPI_STATE_READY; + HAL_SPI_TxRxCpltCallback(hspi); + } + else + { + /* Set state to READY before run the Callback Complete */ + hspi->State = HAL_SPI_STATE_READY; + HAL_SPI_TxCpltCallback(hspi); + } + } + else + { + /* Set state to READY before run the Callback Complete */ + hspi->State = HAL_SPI_STATE_READY; + /* Call Error call back in case of Error */ + HAL_SPI_ErrorCallback(hspi); + } + } +} + +/** + * @brief Interrupt Handler to transmit amount of data in no-blocking mode + * @param hspi: pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval void + */ +static void SPI_TxISR(struct __SPI_HandleTypeDef *hspi) +{ + /* Transmit data in 8 Bit mode */ + if(hspi->Init.DataSize == SPI_DATASIZE_8BIT) + { + hspi->Instance->DR = (*hspi->pTxBuffPtr++); + } + /* Transmit data in 16 Bit mode */ + else + { + hspi->Instance->DR = *((uint16_t*)hspi->pTxBuffPtr); + hspi->pTxBuffPtr+=2; + } + hspi->TxXferCount--; + + if(hspi->TxXferCount == 0) + { + if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + /* calculate and transfer CRC on Tx line */ + SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); + } + SPI_TxCloseIRQHandler(hspi); + } +} + +/** + * @brief Interrupt Handler to close Rx transfer + * @param hspi: pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval void + */ +static void SPI_RxCloseIRQHandler(struct __SPI_HandleTypeDef *hspi) +{ + __IO uint16_t tmpreg = 0; + + if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + /* Wait until RXNE flag is set to send data */ + if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_RXNE, RESET, SPI_TIMEOUT_VALUE) != HAL_OK) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); + } + + /* Read CRC to reset RXNE flag */ + tmpreg = hspi->Instance->DR; + UNUSED(tmpreg); + + /* Wait until RXNE flag is set to send data */ + if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_RXNE, SET, SPI_TIMEOUT_VALUE) != HAL_OK) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); + } + + /* Check if CRC error occurred */ + if(__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR) != RESET) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + + /* Reset CRC Calculation */ + SPI_RESET_CRC(hspi); + } + } + + /* Disable RXNE interrupt */ + __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_RXNE)); + + /* if Transmit process is finished */ + if(__HAL_SPI_GET_IT_SOURCE(hspi, SPI_IT_TXE) == RESET) + { + /* Disable ERR interrupt */ + __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_ERR)); + + if((hspi->Init.Mode == SPI_MODE_MASTER)&&((hspi->Init.Direction == SPI_DIRECTION_1LINE)||(hspi->Init.Direction == SPI_DIRECTION_2LINES_RXONLY))) + { + /* Disable SPI peripheral */ + __HAL_SPI_DISABLE(hspi); + } + + /* Check if Errors has been detected during transfer */ + if(hspi->ErrorCode == HAL_SPI_ERROR_NONE) + { + /* Check if we are in Rx or in Rx/Tx Mode */ + if(hspi->State == HAL_SPI_STATE_BUSY_TX_RX) + { + /* Set state to READY before run the Callback Complete */ + hspi->State = HAL_SPI_STATE_READY; + HAL_SPI_TxRxCpltCallback(hspi); + } + else + { + /* Set state to READY before run the Callback Complete */ + hspi->State = HAL_SPI_STATE_READY; + HAL_SPI_RxCpltCallback(hspi); + } + } + else + { + /* Set state to READY before run the Callback Complete */ + hspi->State = HAL_SPI_STATE_READY; + /* Call Error call back in case of Error */ + HAL_SPI_ErrorCallback(hspi); + } + } +} + +/** + * @brief Interrupt Handler to receive amount of data in 2Lines mode + * @param hspi: pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval void + */ +static void SPI_2LinesRxISR(struct __SPI_HandleTypeDef *hspi) +{ + /* Receive data in 8 Bit mode */ + if(hspi->Init.DataSize == SPI_DATASIZE_8BIT) + { + (*hspi->pRxBuffPtr++) = hspi->Instance->DR; + } + /* Receive data in 16 Bit mode */ + else + { + *((uint16_t*)hspi->pRxBuffPtr) = hspi->Instance->DR; + hspi->pRxBuffPtr+=2; + } + hspi->RxXferCount--; + + if(hspi->RxXferCount==0) + { + SPI_RxCloseIRQHandler(hspi); + } +} + +/** + * @brief Interrupt Handler to receive amount of data in no-blocking mode + * @param hspi: pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval void + */ +static void SPI_RxISR(struct __SPI_HandleTypeDef *hspi) +{ + /* Receive data in 8 Bit mode */ + if(hspi->Init.DataSize == SPI_DATASIZE_8BIT) + { + (*hspi->pRxBuffPtr++) = hspi->Instance->DR; + } + /* Receive data in 16 Bit mode */ + else + { + *((uint16_t*)hspi->pRxBuffPtr) = hspi->Instance->DR; + hspi->pRxBuffPtr+=2; + } + hspi->RxXferCount--; + + /* Enable CRC Transmission */ + if((hspi->RxXferCount == 1) && (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)) + { + /* Set CRC Next to calculate CRC on Rx side */ + SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); + } + + if(hspi->RxXferCount == 0) + { + SPI_RxCloseIRQHandler(hspi); + } +} + +/** + * @brief DMA SPI transmit process complete callback + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void SPI_DMATransmitCplt(struct __DMA_HandleTypeDef *hdma) +{ + SPI_HandleTypeDef* hspi = ( SPI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; + + /* DMA Normal Mode */ + if((hdma->Instance->CCR & DMA_CIRCULAR) == 0) + { + /* Wait until TXE flag is set to send data */ + if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_TXE, RESET, SPI_TIMEOUT_VALUE) != HAL_OK) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); + } + + /* Disable Tx DMA Request */ + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN); + + /* Wait until Busy flag is reset before disabling SPI */ + if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_BSY, SET, SPI_TIMEOUT_VALUE) != HAL_OK) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); + } + + hspi->TxXferCount = 0; + hspi->State = HAL_SPI_STATE_READY; + } + + /* Clear OVERUN flag in 2 Lines communication mode because received is not read */ + if(hspi->Init.Direction == SPI_DIRECTION_2LINES) + { + __HAL_SPI_CLEAR_OVRFLAG(hspi); + } + + /* Check if Errors has been detected during transfer */ + if(hspi->ErrorCode != HAL_SPI_ERROR_NONE) + { + HAL_SPI_ErrorCallback(hspi); + } + else + { + HAL_SPI_TxCpltCallback(hspi); + } +} + +/** + * @brief DMA SPI receive process complete callback + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void SPI_DMAReceiveCplt(struct __DMA_HandleTypeDef *hdma) +{ + __IO uint16_t tmpreg = 0; + + SPI_HandleTypeDef* hspi = ( SPI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; + + /* DMA Normal mode */ + if((hdma->Instance->CCR & DMA_CIRCULAR) == 0) + { + if((hspi->Init.Mode == SPI_MODE_MASTER)&&((hspi->Init.Direction == SPI_DIRECTION_1LINE)||(hspi->Init.Direction == SPI_DIRECTION_2LINES_RXONLY))) + { + /* Disable SPI peripheral */ + __HAL_SPI_DISABLE(hspi); + } + + /* Disable Rx DMA Request */ + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_RXDMAEN); + + /* Disable Tx DMA Request (done by default to handle the case Master RX direction 2 lines) */ + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN); + + /* Reset CRC Calculation */ + if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + /* Wait until RXNE flag is set to send data */ + if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_RXNE, RESET, SPI_TIMEOUT_VALUE) != HAL_OK) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); + } + + /* Read CRC */ + tmpreg = hspi->Instance->DR; + UNUSED(tmpreg); + + /* Wait until RXNE flag is set */ + if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_RXNE, SET, SPI_TIMEOUT_VALUE) != HAL_OK) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); + } + + /* Check if CRC error occurred */ + if(__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR) != RESET) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + __HAL_SPI_CLEAR_CRCERRFLAG(hspi); + } + } + + hspi->RxXferCount = 0; + hspi->State = HAL_SPI_STATE_READY; + + /* Check if Errors has been detected during transfer */ + if(hspi->ErrorCode != HAL_SPI_ERROR_NONE) + { + HAL_SPI_ErrorCallback(hspi); + } + else + { + HAL_SPI_RxCpltCallback(hspi); + } + } + else + { + HAL_SPI_RxCpltCallback(hspi); + } +} + +/** + * @brief DMA SPI transmit receive process complete callback + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void SPI_DMATransmitReceiveCplt(struct __DMA_HandleTypeDef *hdma) +{ + __IO uint16_t tmpreg = 0; + + SPI_HandleTypeDef* hspi = ( SPI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; + + if((hdma->Instance->CCR & DMA_CIRCULAR) == 0) + { + /* Reset CRC Calculation */ + if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + /* Check if CRC is done on going (RXNE flag set) */ + if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_RXNE, SET, SPI_TIMEOUT_VALUE) == HAL_OK) + { + /* Wait until RXNE flag is set to send data */ + if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_RXNE, RESET, SPI_TIMEOUT_VALUE) != HAL_OK) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); + } + } + /* Read CRC */ + tmpreg = hspi->Instance->DR; + UNUSED(tmpreg); + + /* Check if CRC error occurred */ + if(__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR) != RESET) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + __HAL_SPI_CLEAR_CRCERRFLAG(hspi); + } + } + + /* Wait until TXE flag is set to send data */ + if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_TXE, RESET, SPI_TIMEOUT_VALUE) != HAL_OK) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); + } + + /* Disable Tx DMA Request */ + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN); + + /* Wait until Busy flag is reset before disabling SPI */ + if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_BSY, SET, SPI_TIMEOUT_VALUE) != HAL_OK) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); + } + + /* Disable Rx DMA Request */ + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_RXDMAEN); + + hspi->TxXferCount = 0; + hspi->RxXferCount = 0; + + hspi->State = HAL_SPI_STATE_READY; + + /* Check if Errors has been detected during transfer */ + if(hspi->ErrorCode != HAL_SPI_ERROR_NONE) + { + HAL_SPI_ErrorCallback(hspi); + } + else + { + HAL_SPI_TxRxCpltCallback(hspi); + } + } + else + { + HAL_SPI_TxRxCpltCallback(hspi); + } +} + +/** + * @brief DMA SPI half transmit process complete callback + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void SPI_DMAHalfTransmitCplt(struct __DMA_HandleTypeDef *hdma) +{ + SPI_HandleTypeDef* hspi = ( SPI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; + + HAL_SPI_TxHalfCpltCallback(hspi); +} + +/** + * @brief DMA SPI half receive process complete callback + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void SPI_DMAHalfReceiveCplt(struct __DMA_HandleTypeDef *hdma) +{ + SPI_HandleTypeDef* hspi = ( SPI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; + + HAL_SPI_RxHalfCpltCallback(hspi); +} + +/** + * @brief DMA SPI Half transmit receive process complete callback + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void SPI_DMAHalfTransmitReceiveCplt(struct __DMA_HandleTypeDef *hdma) +{ + SPI_HandleTypeDef* hspi = ( SPI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; + + HAL_SPI_TxRxHalfCpltCallback(hspi); +} + +/** + * @brief DMA SPI communication error callback + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void SPI_DMAError(struct __DMA_HandleTypeDef *hdma) +{ + SPI_HandleTypeDef* hspi = (SPI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; + hspi->TxXferCount = 0; + hspi->RxXferCount = 0; + hspi->State= HAL_SPI_STATE_READY; + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_DMA); + HAL_SPI_ErrorCallback(hspi); +} + +/** + * @brief This function handles SPI Communication Timeout. + * @param hspi: pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @param Flag: SPI flag to check + * @param Status: Flag status to check: RESET or set + * @param Timeout: Timeout duration + * @retval HAL status + */ +static HAL_StatusTypeDef SPI_WaitOnFlagUntilTimeout(struct __SPI_HandleTypeDef *hspi, uint32_t Flag, FlagStatus Status, uint32_t Timeout) +{ + uint32_t tickstart = 0; + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Wait until flag is set */ + if(Status == RESET) + { + while(__HAL_SPI_GET_FLAG(hspi, Flag) == RESET) + { + if(Timeout != HAL_MAX_DELAY) + { + if((Timeout == 0) || ((HAL_GetTick() - tickstart ) > Timeout)) + { + /* Disable the SPI and reset the CRC: the CRC value should be cleared + on both master and slave sides in order to resynchronize the master + and slave for their respective CRC calculation */ + + /* Disable TXE, RXNE and ERR interrupts for the interrupt process */ + __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_TXE | SPI_IT_RXNE | SPI_IT_ERR)); + + /* Disable SPI peripheral */ + __HAL_SPI_DISABLE(hspi); + + /* Reset CRC Calculation */ + if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + SPI_RESET_CRC(hspi); + } + + hspi->State= HAL_SPI_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hspi); + + return HAL_TIMEOUT; + } + } + } + } + else + { + while(__HAL_SPI_GET_FLAG(hspi, Flag) != RESET) + { + if(Timeout != HAL_MAX_DELAY) + { + if((Timeout == 0) || ((HAL_GetTick() - tickstart ) > Timeout)) + { + /* Disable the SPI and reset the CRC: the CRC value should be cleared + on both master and slave sides in order to resynchronize the master + and slave for their respective CRC calculation */ + + /* Disable TXE, RXNE and ERR interrupts for the interrupt process */ + __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_TXE | SPI_IT_RXNE | SPI_IT_ERR)); + + /* Disable SPI peripheral */ + __HAL_SPI_DISABLE(hspi); + + /* Reset CRC Calculation */ + if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + SPI_RESET_CRC(hspi); + } + + hspi->State= HAL_SPI_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hspi); + + return HAL_TIMEOUT; + } + } + } + } + return HAL_OK; +} +/** + * @} + */ + +#endif /* HAL_SPI_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_spi_ex.c b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_spi_ex.c new file mode 100755 index 0000000..34790c7 --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_spi_ex.c @@ -0,0 +1,156 @@ +/** + ****************************************************************************** + * @file stm32l1xx_hal_spi_ex.c + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief Extended SPI HAL module driver. + * + * This file provides firmware functions to manage the following + * functionalities SPI extension peripheral: + * + Extended Peripheral Control functions + * + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_hal.h" + +/** @addtogroup STM32L1xx_HAL_Driver + * @{ + */ + +/** @addtogroup SPI + * @{ + */ +#ifdef HAL_SPI_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @addtogroup SPI_Exported_Functions + * @{ + */ + +/** @addtogroup SPI_Exported_Functions_Group1 + * + * @{ + */ + +/** + * @brief Initializes the SPI according to the specified parameters + * in the SPI_InitTypeDef and create the associated handle. + * @param hspi: pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_Init(SPI_HandleTypeDef *hspi) +{ + /* Check the SPI handle allocation */ + if(hspi == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_SPI_ALL_INSTANCE(hspi->Instance)); + assert_param(IS_SPI_MODE(hspi->Init.Mode)); + assert_param(IS_SPI_DIRECTION_MODE(hspi->Init.Direction)); + assert_param(IS_SPI_DATASIZE(hspi->Init.DataSize)); + assert_param(IS_SPI_CPOL(hspi->Init.CLKPolarity)); + assert_param(IS_SPI_CPHA(hspi->Init.CLKPhase)); + assert_param(IS_SPI_NSS(hspi->Init.NSS)); + assert_param(IS_SPI_BAUDRATE_PRESCALER(hspi->Init.BaudRatePrescaler)); + assert_param(IS_SPI_FIRST_BIT(hspi->Init.FirstBit)); + assert_param(IS_SPI_TIMODE(hspi->Init.TIMode)); + assert_param(IS_SPI_CRC_CALCULATION(hspi->Init.CRCCalculation)); + assert_param(IS_SPI_CRC_POLYNOMIAL(hspi->Init.CRCPolynomial)); + + if(hspi->State == HAL_SPI_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hspi->Lock = HAL_UNLOCKED; + + /* Init the low level hardware : GPIO, CLOCK, NVIC... */ + HAL_SPI_MspInit(hspi); + } + + hspi->State = HAL_SPI_STATE_BUSY; + + /* Disble the selected SPI peripheral */ + __HAL_SPI_DISABLE(hspi); + + /*----------------------- SPIx CR1 & CR2 Configuration ---------------------*/ + /* Configure : SPI Mode, Communication Mode, Data size, Clock polarity and phase, NSS management, + Communication speed, First bit and CRC calculation state */ + hspi->Instance->CR1 = (hspi->Init.Mode | hspi->Init.Direction | hspi->Init.DataSize | + hspi->Init.CLKPolarity | hspi->Init.CLKPhase | (hspi->Init.NSS & SPI_CR1_SSM) | + hspi->Init.BaudRatePrescaler | hspi->Init.FirstBit | hspi->Init.CRCCalculation); + + /* Configure : NSS management */ + hspi->Instance->CR2 = (((hspi->Init.NSS >> 16) & SPI_CR2_SSOE) | hspi->Init.TIMode); + + /*---------------------------- SPIx CRCPOLY Configuration ------------------*/ + /* Configure : CRC Polynomial */ + hspi->Instance->CRCPR = hspi->Init.CRCPolynomial; + +#if defined (STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined (STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined (STM32L151xE) || defined (STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) + /* Activate the SPI mode (Make sure that I2SMOD bit in I2SCFGR register is reset) */ + CLEAR_BIT(hspi->Instance->I2SCFGR, SPI_I2SCFGR_I2SMOD); +#endif + + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + hspi->State = HAL_SPI_STATE_READY; + + return HAL_OK; +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_SPI_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_sram.c b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_sram.c new file mode 100755 index 0000000..280364a --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_sram.c @@ -0,0 +1,696 @@ +/** + ****************************************************************************** + * @file stm32l1xx_hal_sram.c + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief SRAM HAL module driver. + * This file provides a generic firmware to drive SRAM memories + * mounted as external device. + * + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + This driver is a generic layered driver which contains a set of APIs used to + control SRAM memories. It uses the FSMC layer functions to interface + with SRAM devices. + The following sequence should be followed to configure the FSMC to interface + with SRAM/PSRAM memories: + + (#) Declare a SRAM_HandleTypeDef handle structure, for example: + SRAM_HandleTypeDef hsram; and: + + (++) Fill the SRAM_HandleTypeDef handle "Init" field with the allowed + values of the structure member. + + (++) Fill the SRAM_HandleTypeDef handle "Instance" field with a predefined + base register instance for NOR or SRAM device + + (++) Fill the SRAM_HandleTypeDef handle "Extended" field with a predefined + base register instance for NOR or SRAM extended mode + + (#) Declare two FSMC_NORSRAM_TimingTypeDef structures, for both normal and extended + mode timings; for example: + FSMC_NORSRAM_TimingTypeDef Timing and FSMC_NORSRAM_TimingTypeDef ExTiming; + and fill its fields with the allowed values of the structure member. + + (#) Initialize the SRAM Controller by calling the function HAL_SRAM_Init(). This function + performs the following sequence: + + (##) MSP hardware layer configuration using the function HAL_SRAM_MspInit() + (##) Control register configuration using the FSMC NORSRAM interface function + FSMC_NORSRAM_Init() + (##) Timing register configuration using the FSMC NORSRAM interface function + FSMC_NORSRAM_Timing_Init() + (##) Extended mode Timing register configuration using the FSMC NORSRAM interface function + FSMC_NORSRAM_Extended_Timing_Init() + (##) Enable the SRAM device using the macro __FSMC_NORSRAM_ENABLE() + + (#) At this stage you can perform read/write accesses from/to the memory connected + to the NOR/SRAM Bank. You can perform either polling or DMA transfer using the + following APIs: + (++) HAL_SRAM_Read()/HAL_SRAM_Write() for polling read/write access + (++) HAL_SRAM_Read_DMA()/HAL_SRAM_Write_DMA() for DMA read/write transfer + + (#) You can also control the SRAM device by calling the control APIs HAL_SRAM_WriteOperation_Enable()/ + HAL_SRAM_WriteOperation_Disable() to respectively enable/disable the SRAM write operation + + (#) You can continuously monitor the SRAM device HAL state by calling the function + HAL_SRAM_GetState() + + @endverbatim + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_hal.h" + +/** @addtogroup STM32L1xx_HAL_Driver + * @{ + */ + +#ifdef HAL_SRAM_MODULE_ENABLED + +#if defined (STM32L151xD) || defined (STM32L152xD) || defined (STM32L162xD) + +/** @defgroup SRAM SRAM + * @brief SRAM driver modules + * @{ + */ +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup SRAM_Exported_Functions SRAM Exported Functions + * @{ + */ + +/** @defgroup SRAM_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions. + * + @verbatim + ============================================================================== + ##### SRAM Initialization and de_initialization functions ##### + ============================================================================== + [..] This section provides functions allowing to initialize/de-initialize + the SRAM memory + +@endverbatim + * @{ + */ + +/** + * @brief Performs the SRAM device initialization sequence + * @param hsram: pointer to a SRAM_HandleTypeDef structure that contains + * the configuration information for SRAM module. + * @param Timing: Pointer to SRAM control timing structure + * @param ExtTiming: Pointer to SRAM extended mode timing structure + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SRAM_Init(SRAM_HandleTypeDef *hsram, FSMC_NORSRAM_TimingTypeDef *Timing, FSMC_NORSRAM_TimingTypeDef *ExtTiming) +{ + /* Check the SRAM handle parameter */ + if(hsram == NULL) + { + return HAL_ERROR; + } + + if(hsram->State == HAL_SRAM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hsram->Lock = HAL_UNLOCKED; + + /* Initialize the low level hardware (MSP) */ + HAL_SRAM_MspInit(hsram); + } + + /* Initialize SRAM control Interface */ + FSMC_NORSRAM_Init(hsram->Instance, &(hsram->Init)); + + /* Initialize SRAM timing Interface */ + FSMC_NORSRAM_Timing_Init(hsram->Instance, Timing, hsram->Init.NSBank); + + /* Initialize SRAM extended mode timing Interface */ + FSMC_NORSRAM_Extended_Timing_Init(hsram->Extended, ExtTiming, hsram->Init.NSBank, hsram->Init.ExtendedMode); + + /* Enable the NORSRAM device */ + __FSMC_NORSRAM_ENABLE(hsram->Instance, hsram->Init.NSBank); + + return HAL_OK; +} + +/** + * @brief Performs the SRAM device De-initialization sequence. + * @param hsram: pointer to a SRAM_HandleTypeDef structure that contains + * the configuration information for SRAM module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SRAM_DeInit(SRAM_HandleTypeDef *hsram) +{ + /* De-Initialize the low level hardware (MSP) */ + HAL_SRAM_MspDeInit(hsram); + + /* Configure the SRAM registers with their reset values */ + FSMC_NORSRAM_DeInit(hsram->Instance, hsram->Extended, hsram->Init.NSBank); + + hsram->State = HAL_SRAM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(hsram); + + return HAL_OK; +} + +/** + * @brief SRAM MSP Init. + * @param hsram: pointer to a SRAM_HandleTypeDef structure that contains + * the configuration information for SRAM module. + * @retval None + */ +__weak void HAL_SRAM_MspInit(SRAM_HandleTypeDef *hsram) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsram); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_SRAM_MspInit could be implemented in the user file + */ +} + +/** + * @brief SRAM MSP DeInit. + * @param hsram: pointer to a SRAM_HandleTypeDef structure that contains + * the configuration information for SRAM module. + * @retval None + */ +__weak void HAL_SRAM_MspDeInit(SRAM_HandleTypeDef *hsram) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsram); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_SRAM_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief DMA transfer complete callback. + * @param hdma: pointer to a SRAM_HandleTypeDef structure that contains + * the configuration information for SRAM module. + * @retval None + */ +__weak void HAL_SRAM_DMA_XferCpltCallback(DMA_HandleTypeDef *hdma) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hdma); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_SRAM_DMA_XferCpltCallback could be implemented in the user file + */ +} + +/** + * @brief DMA transfer complete error callback. + * @param hdma: pointer to a SRAM_HandleTypeDef structure that contains + * the configuration information for SRAM module. + * @retval None + */ +__weak void HAL_SRAM_DMA_XferErrorCallback(DMA_HandleTypeDef *hdma) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hdma); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_SRAM_DMA_XferErrorCallback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup SRAM_Exported_Functions_Group2 Input Output and memory control functions + * @brief Input Output and memory control functions + * + @verbatim + ============================================================================== + ##### SRAM Input and Output functions ##### + ============================================================================== + [..] + This section provides functions allowing to use and control the SRAM memory + +@endverbatim + * @{ + */ + +/** + * @brief Reads 8-bit buffer from SRAM memory. + * @param hsram: pointer to a SRAM_HandleTypeDef structure that contains + * the configuration information for SRAM module. + * @param pAddress: Pointer to read start address + * @param pDstBuffer: Pointer to destination buffer + * @param BufferSize: Size of the buffer to read from memory + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SRAM_Read_8b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint8_t *pDstBuffer, uint32_t BufferSize) +{ + __IO uint8_t * psramaddress = (uint8_t *)pAddress; + + /* Process Locked */ + __HAL_LOCK(hsram); + + /* Update the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_BUSY; + + /* Read data from memory */ + for(; BufferSize != 0; BufferSize--) + { + *pDstBuffer = *(__IO uint8_t *)psramaddress; + pDstBuffer++; + psramaddress++; + } + + /* Update the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hsram); + + return HAL_OK; +} + +/** + * @brief Writes 8-bit buffer to SRAM memory. + * @param hsram: pointer to a SRAM_HandleTypeDef structure that contains + * the configuration information for SRAM module. + * @param pAddress: Pointer to write start address + * @param pSrcBuffer: Pointer to source buffer to write + * @param BufferSize: Size of the buffer to write to memory + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SRAM_Write_8b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint8_t *pSrcBuffer, uint32_t BufferSize) +{ + __IO uint8_t * psramaddress = (uint8_t *)pAddress; + + /* Check the SRAM controller state */ + if(hsram->State == HAL_SRAM_STATE_PROTECTED) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hsram); + + /* Update the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_BUSY; + + /* Write data to memory */ + for(; BufferSize != 0; BufferSize--) + { + *(__IO uint8_t *)psramaddress = *pSrcBuffer; + pSrcBuffer++; + psramaddress++; + } + + /* Update the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hsram); + + return HAL_OK; +} + +/** + * @brief Reads 16-bit buffer from SRAM memory. + * @param hsram: pointer to a SRAM_HandleTypeDef structure that contains + * the configuration information for SRAM module. + * @param pAddress: Pointer to read start address + * @param pDstBuffer: Pointer to destination buffer + * @param BufferSize: Size of the buffer to read from memory + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SRAM_Read_16b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint16_t *pDstBuffer, uint32_t BufferSize) +{ + __IO uint16_t * psramaddress = (uint16_t *)pAddress; + + /* Process Locked */ + __HAL_LOCK(hsram); + + /* Update the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_BUSY; + + /* Read data from memory */ + for(; BufferSize != 0; BufferSize--) + { + *pDstBuffer = *(__IO uint16_t *)psramaddress; + pDstBuffer++; + psramaddress++; + } + + /* Update the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hsram); + + return HAL_OK; +} + +/** + * @brief Writes 16-bit buffer to SRAM memory. + * @param hsram: pointer to a SRAM_HandleTypeDef structure that contains + * the configuration information for SRAM module. + * @param pAddress: Pointer to write start address + * @param pSrcBuffer: Pointer to source buffer to write + * @param BufferSize: Size of the buffer to write to memory + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SRAM_Write_16b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint16_t *pSrcBuffer, uint32_t BufferSize) +{ + __IO uint16_t * psramaddress = (uint16_t *)pAddress; + + /* Check the SRAM controller state */ + if(hsram->State == HAL_SRAM_STATE_PROTECTED) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hsram); + + /* Update the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_BUSY; + + /* Write data to memory */ + for(; BufferSize != 0; BufferSize--) + { + *(__IO uint16_t *)psramaddress = *pSrcBuffer; + pSrcBuffer++; + psramaddress++; + } + + /* Update the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hsram); + + return HAL_OK; +} + +/** + * @brief Reads 32-bit buffer from SRAM memory. + * @param hsram: pointer to a SRAM_HandleTypeDef structure that contains + * the configuration information for SRAM module. + * @param pAddress: Pointer to read start address + * @param pDstBuffer: Pointer to destination buffer + * @param BufferSize: Size of the buffer to read from memory + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SRAM_Read_32b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pDstBuffer, uint32_t BufferSize) +{ + /* Process Locked */ + __HAL_LOCK(hsram); + + /* Update the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_BUSY; + + /* Read data from memory */ + for(; BufferSize != 0; BufferSize--) + { + *pDstBuffer = *(__IO uint32_t *)pAddress; + pDstBuffer++; + pAddress++; + } + + /* Update the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hsram); + + return HAL_OK; +} + +/** + * @brief Writes 32-bit buffer to SRAM memory. + * @param hsram: pointer to a SRAM_HandleTypeDef structure that contains + * the configuration information for SRAM module. + * @param pAddress: Pointer to write start address + * @param pSrcBuffer: Pointer to source buffer to write + * @param BufferSize: Size of the buffer to write to memory + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SRAM_Write_32b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pSrcBuffer, uint32_t BufferSize) +{ + /* Check the SRAM controller state */ + if(hsram->State == HAL_SRAM_STATE_PROTECTED) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hsram); + + /* Update the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_BUSY; + + /* Write data to memory */ + for(; BufferSize != 0; BufferSize--) + { + *(__IO uint32_t *)pAddress = *pSrcBuffer; + pSrcBuffer++; + pAddress++; + } + + /* Update the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hsram); + + return HAL_OK; +} + +/** + * @brief Reads a Words data from the SRAM memory using DMA transfer. + * @param hsram: pointer to a SRAM_HandleTypeDef structure that contains + * the configuration information for SRAM module. + * @param pAddress: Pointer to read start address + * @param pDstBuffer: Pointer to destination buffer + * @param BufferSize: Size of the buffer to read from memory + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SRAM_Read_DMA(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pDstBuffer, uint32_t BufferSize) +{ + /* Process Locked */ + __HAL_LOCK(hsram); + + /* Update the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_BUSY; + + /* Configure DMA user callbacks */ + hsram->hdma->XferCpltCallback = HAL_SRAM_DMA_XferCpltCallback; + hsram->hdma->XferErrorCallback = HAL_SRAM_DMA_XferErrorCallback; + + /* Enable the DMA Channel */ + HAL_DMA_Start_IT(hsram->hdma, (uint32_t)pAddress, (uint32_t)pDstBuffer, (uint32_t)BufferSize); + + /* Update the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hsram); + + return HAL_OK; +} + +/** + * @brief Writes a Words data buffer to SRAM memory using DMA transfer. + * @param hsram: pointer to a SRAM_HandleTypeDef structure that contains + * the configuration information for SRAM module. + * @param pAddress: Pointer to write start address + * @param pSrcBuffer: Pointer to source buffer to write + * @param BufferSize: Size of the buffer to write to memory + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SRAM_Write_DMA(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pSrcBuffer, uint32_t BufferSize) +{ + /* Check the SRAM controller state */ + if(hsram->State == HAL_SRAM_STATE_PROTECTED) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hsram); + + /* Update the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_BUSY; + + /* Configure DMA user callbacks */ + hsram->hdma->XferCpltCallback = HAL_SRAM_DMA_XferCpltCallback; + hsram->hdma->XferErrorCallback = HAL_SRAM_DMA_XferErrorCallback; + + /* Enable the DMA Channel */ + HAL_DMA_Start_IT(hsram->hdma, (uint32_t)pSrcBuffer, (uint32_t)pAddress, (uint32_t)BufferSize); + + /* Update the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hsram); + + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup SRAM_Exported_Functions_Group3 Control functions + * @brief Control functions + * +@verbatim + ============================================================================== + ##### SRAM Control functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to control dynamically + the SRAM interface. + +@endverbatim + * @{ + */ + +/** + * @brief Enables dynamically SRAM write operation. + * @param hsram: pointer to a SRAM_HandleTypeDef structure that contains + * the configuration information for SRAM module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SRAM_WriteOperation_Enable(SRAM_HandleTypeDef *hsram) +{ + /* Process Locked */ + __HAL_LOCK(hsram); + + /* Enable write operation */ + FSMC_NORSRAM_WriteOperation_Enable(hsram->Instance, hsram->Init.NSBank); + + /* Update the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hsram); + + return HAL_OK; +} + +/** + * @brief Disables dynamically SRAM write operation. + * @param hsram: pointer to a SRAM_HandleTypeDef structure that contains + * the configuration information for SRAM module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SRAM_WriteOperation_Disable(SRAM_HandleTypeDef *hsram) +{ + /* Process Locked */ + __HAL_LOCK(hsram); + + /* Update the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_BUSY; + + /* Disable write operation */ + FSMC_NORSRAM_WriteOperation_Disable(hsram->Instance, hsram->Init.NSBank); + + /* Update the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_PROTECTED; + + /* Process unlocked */ + __HAL_UNLOCK(hsram); + + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup SRAM_Exported_Functions_Group4 Peripheral State functions + * @brief Peripheral State functions + * +@verbatim + ============================================================================== + ##### SRAM State functions ##### + ============================================================================== + [..] + This subsection permits to get in run-time the status of the SRAM controller + and the data flow. + +@endverbatim + * @{ + */ + +/** + * @brief Returns the SRAM controller state + * @param hsram: pointer to a SRAM_HandleTypeDef structure that contains + * the configuration information for SRAM module. + * @retval HAL state + */ +HAL_SRAM_StateTypeDef HAL_SRAM_GetState(SRAM_HandleTypeDef *hsram) +{ + return hsram->State; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +#endif /* STM32L151xD || STM32L152xD || STM32L162xD */ +#endif /* HAL_SRAM_MODULE_ENABLED */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_tim.c b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_tim.c new file mode 100755 index 0000000..beeb1ef --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_tim.c @@ -0,0 +1,5184 @@ +/** + ****************************************************************************** + * @file stm32l1xx_hal_tim.c + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief TIM HAL module driver + * This file provides firmware functions to manage the following + * functionalities of the Timer (TIM) peripheral: + * + Time Base Initialization + * + Time Base Start + * + Time Base Start Interruption + * + Time Base Start DMA + * + Time Output Compare/PWM Initialization + * + Time Output Compare/PWM Channel Configuration + * + Time Output Compare/PWM Start + * + Time Output Compare/PWM Start Interruption + * + Time Output Compare/PWM Start DMA + * + Time Input Capture Initialization + * + Time Input Capture Channel Configuration + * + Time Input Capture Start + * + Time Input Capture Start Interruption + * + Time Input Capture Start DMA + * + Time One Pulse Initialization + * + Time One Pulse Channel Configuration + * + Time One Pulse Start + * + Time Encoder Interface Initialization + * + Time Encoder Interface Start + * + Time Encoder Interface Start Interruption + * + Time Encoder Interface Start DMA + * + Commutation Event configuration with Interruption and DMA + * + Time OCRef clear configuration + * + Time External Clock configuration + * + Time Master and Slave synchronization configuration + @verbatim + ============================================================================== + ##### TIMER Generic features ##### + ============================================================================== + [..] The Timer features include: + (#) 16-bit up, down, up/down auto-reload counter. + (#) 16-bit programmable prescaler allowing dividing (also on the fly) the + counter clock frequency either by any factor between 1 and 65536. + (#) Up to 4 independent channels for: + (++) Input Capture + (++) Output Compare + (++) PWM generation (Edge and Center-aligned Mode) + (++) One-pulse mode output + (#) Synchronization circuit to control the timer with external signals and to interconnect + several timers together. + (#) Supports incremental (quadrature) encoder + + ##### How to use this driver ##### +================================================================================ + [..] + (#) Initialize the TIM low level resources by implementing the following functions + depending from feature used : + (++) Time Base : HAL_TIM_Base_MspInit() + (++) Input Capture : HAL_TIM_IC_MspInit() + (++) Output Compare : HAL_TIM_OC_MspInit() + (++) PWM generation : HAL_TIM_PWM_MspInit() + (++) One-pulse mode output : HAL_TIM_OnePulse_MspInit() + (++) Encoder mode output : HAL_TIM_Encoder_MspInit() + + (#) Initialize the TIM low level resources : + (##) Enable the TIM interface clock using __HAL_RCC_TIMx_CLK_ENABLE(); + (##) TIM pins configuration + (+++) Enable the clock for the TIM GPIOs using the following function: + __HAL_RCC_GPIOx_CLK_ENABLE(); + (+++) Configure these TIM pins in Alternate function mode using HAL_GPIO_Init(); + + (#) The external Clock can be configured, if needed (the default clock is the + internal clock from the APBx), using the following function: + HAL_TIM_ConfigClockSource, the clock configuration should be done before + any start function. + + (#) Configure the TIM in the desired functioning mode using one of the + Initialization function of this driver: + (++) HAL_TIM_Base_Init: to use the Timer to generate a simple time base + (++) HAL_TIM_OC_Init and HAL_TIM_OC_ConfigChannel: to use the Timer to generate an + Output Compare signal. + (++) HAL_TIM_PWM_Init and HAL_TIM_PWM_ConfigChannel: to use the Timer to generate a + PWM signal. + (++) HAL_TIM_IC_Init and HAL_TIM_IC_ConfigChannel: to use the Timer to measure an + external signal. + (++) HAL_TIM_OnePulse_Init and HAL_TIM_OnePulse_ConfigChannel: to use the Timer + in One Pulse Mode. + (++) HAL_TIM_Encoder_Init: to use the Timer Encoder Interface. + + (#) Activate the TIM peripheral using one of the start functions depending from the feature used: + (++) Time Base : HAL_TIM_Base_Start(), HAL_TIM_Base_Start_DMA(), HAL_TIM_Base_Start_IT() + (++) Input Capture : HAL_TIM_IC_Start(), HAL_TIM_IC_Start_DMA(), HAL_TIM_IC_Start_IT() + (++) Output Compare : HAL_TIM_OC_Start(), HAL_TIM_OC_Start_DMA(), HAL_TIM_OC_Start_IT() + (++) PWM generation : HAL_TIM_PWM_Start(), HAL_TIM_PWM_Start_DMA(), HAL_TIM_PWM_Start_IT() + (++) One-pulse mode output : HAL_TIM_OnePulse_Start(), HAL_TIM_OnePulse_Start_IT() + (++) Encoder mode output : HAL_TIM_Encoder_Start(), HAL_TIM_Encoder_Start_DMA(), HAL_TIM_Encoder_Start_IT(). + + (#) The DMA Burst is managed with the two following functions: + HAL_TIM_DMABurst_WriteStart() + HAL_TIM_DMABurst_ReadStart() + + @endverbatim + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_hal.h" + +/** @addtogroup STM32L1xx_HAL_Driver + * @{ + */ + +/** @defgroup TIM TIM + * @brief TIM HAL module driver + * @{ + */ + +#ifdef HAL_TIM_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup TIM_Private_Functions TIM Private Functions + * @{ + */ +static void TIM_Base_SetConfig(TIM_TypeDef *TIMx, TIM_Base_InitTypeDef *Structure); +static void TIM_OC1_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config); +static void TIM_OC2_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config); +static void TIM_OC3_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config); +static void TIM_OC4_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config); +static void TIM_TI1_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, uint32_t TIM_ICFilter); +static void TIM_TI1_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter); +static void TIM_TI2_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, uint32_t TIM_ICFilter); +static void TIM_TI2_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter); +static void TIM_TI3_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, uint32_t TIM_ICFilter); +static void TIM_TI4_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, uint32_t TIM_ICFilter); +static void TIM_ETR_SetConfig(TIM_TypeDef* TIMx, uint32_t TIM_ExtTRGPrescaler, uint32_t TIM_ExtTRGPolarity, uint32_t ExtTRGFilter); +static void TIM_ITRx_SetConfig(TIM_TypeDef* TIMx, uint16_t InputTriggerSource); +static void TIM_CCxChannelCmd(TIM_TypeDef* TIMx, uint32_t Channel, uint32_t ChannelState); +static void TIM_DMAPeriodElapsedCplt(DMA_HandleTypeDef *hdma); +static void TIM_DMATriggerCplt(DMA_HandleTypeDef *hdma); +static void TIM_SlaveTimer_SetConfig(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef * sSlaveConfig); + +/** + * @} + */ + +/* Exported functions ---------------------------------------------------------*/ + +/** @defgroup TIM_Exported_Functions TIM Exported Functions + * @{ + */ + +/** @defgroup TIM_Exported_Functions_Group1 Time Base functions + * @brief Time Base functions + * +@verbatim + ============================================================================== + ##### Time Base functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the TIM base. + (+) De-initialize the TIM base. + (+) Start the Time Base. + (+) Stop the Time Base. + (+) Start the Time Base and enable interrupt. + (+) Stop the Time Base and disable interrupt. + (+) Start the Time Base and enable DMA transfer. + (+) Stop the Time Base and disable DMA transfer. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the TIM Time base Unit according to the specified + * parameters in the TIM_HandleTypeDef and create the associated handle. + * @param htim: TIM Base handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_Init(TIM_HandleTypeDef *htim) +{ + /* Check the TIM handle allocation */ + if(htim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); + assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + + if(htim->State == HAL_TIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + htim->Lock = HAL_UNLOCKED; + + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + HAL_TIM_Base_MspInit(htim); + } + + /* Set the TIM state */ + htim->State= HAL_TIM_STATE_BUSY; + + /* Set the Time Base configuration */ + TIM_Base_SetConfig(htim->Instance, &htim->Init); + + /* Initialize the TIM state*/ + htim->State= HAL_TIM_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the TIM Base peripheral + * @param htim: TIM Base handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_DeInit(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Disable the TIM Peripheral Clock */ + __HAL_TIM_DISABLE(htim); + + /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ + HAL_TIM_Base_MspDeInit(htim); + + /* Change TIM state */ + htim->State = HAL_TIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM Base MSP. + * @param htim: TIM handle + * @retval None + */ +__weak void HAL_TIM_Base_MspInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_TIM_Base_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes TIM Base MSP. + * @param htim: TIM handle + * @retval None + */ +__weak void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_TIM_Base_MspDeInit could be implemented in the user file + */ +} + + +/** + * @brief Starts the TIM Base generation. + * @param htim : TIM handle + * @retval HAL status +*/ +HAL_StatusTypeDef HAL_TIM_Base_Start(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + /* Set the TIM state */ + htim->State= HAL_TIM_STATE_BUSY; + + /* Enable the Peripheral */ + __HAL_TIM_ENABLE(htim); + + /* Change the TIM state*/ + htim->State= HAL_TIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Base generation. + * @param htim : TIM handle + * @retval HAL status +*/ +HAL_StatusTypeDef HAL_TIM_Base_Stop(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + /* Set the TIM state */ + htim->State= HAL_TIM_STATE_BUSY; + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Change the TIM state*/ + htim->State= HAL_TIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Base generation in interrupt mode. + * @param htim : TIM handle + * @retval HAL status +*/ +HAL_StatusTypeDef HAL_TIM_Base_Start_IT(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + /* Enable the TIM Update interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_UPDATE); + + /* Enable the Peripheral */ + __HAL_TIM_ENABLE(htim); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Base generation in interrupt mode. + * @param htim : TIM handle + * @retval HAL status +*/ +HAL_StatusTypeDef HAL_TIM_Base_Stop_IT(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + /* Disable the TIM Update interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_UPDATE); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Base generation in DMA mode. + * @param htim : TIM handle + * @param pData: The source Buffer address. + * @param Length: The length of data to be transferred from memory to peripheral. + * @retval HAL status +*/ +HAL_StatusTypeDef HAL_TIM_Base_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length) +{ + /* Check the parameters */ + assert_param(IS_TIM_DMA_INSTANCE(htim->Instance)); + + if((htim->State == HAL_TIM_STATE_BUSY)) + { + return HAL_BUSY; + } + else if((htim->State == HAL_TIM_STATE_READY)) + { + if((pData == 0 ) && (Length > 0)) + { + return HAL_ERROR; + } + else + { + htim->State = HAL_TIM_STATE_BUSY; + } + } + else + { + return HAL_ERROR; + } + + /* Set the DMA Period elapsed callback */ + htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)pData, (uint32_t)&htim->Instance->ARR, Length); + + /* Enable the TIM Update DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_UPDATE); + + /* Enable the Peripheral */ + __HAL_TIM_ENABLE(htim); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Base generation in DMA mode. + * @param htim : TIM handle + * @retval HAL status +*/ +HAL_StatusTypeDef HAL_TIM_Base_Stop_DMA(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_DMA_INSTANCE(htim->Instance)); + + /* Disable the TIM Update DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_UPDATE); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Change the htim state */ + htim->State = HAL_TIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group2 Time Output Compare functions + * @brief Time Output Compare functions + * +@verbatim + ============================================================================== + ##### Time Output Compare functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the TIM Output Compare. + (+) De-initialize the TIM Output Compare. + (+) Start the Time Output Compare. + (+) Stop the Time Output Compare. + (+) Start the Time Output Compare and enable interrupt. + (+) Stop the Time Output Compare and disable interrupt. + (+) Start the Time Output Compare and enable DMA transfer. + (+) Stop the Time Output Compare and disable DMA transfer. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the TIM Output Compare according to the specified + * parameters in the TIM_HandleTypeDef and create the associated handle. + * @param htim: TIM Output Compare handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_Init(TIM_HandleTypeDef* htim) +{ + /* Check the TIM handle allocation */ + if(htim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); + assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + + if(htim->State == HAL_TIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + htim->Lock = HAL_UNLOCKED; + + /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_OC_MspInit(htim); + } + + /* Set the TIM state */ + htim->State= HAL_TIM_STATE_BUSY; + + /* Init the base time for the Output Compare */ + TIM_Base_SetConfig(htim->Instance, &htim->Init); + + /* Initialize the TIM state*/ + htim->State= HAL_TIM_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the TIM peripheral + * @param htim: TIM Output Compare handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_DeInit(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Disable the TIM Peripheral Clock */ + __HAL_TIM_DISABLE(htim); + + /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_OC_MspDeInit(htim); + + /* Change TIM state */ + htim->State = HAL_TIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM Output Compare MSP. + * @param htim: TIM handle + * @retval None + */ +__weak void HAL_TIM_OC_MspInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_TIM_OC_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes TIM Output Compare MSP. + * @param htim: TIM handle + * @retval None + */ +__weak void HAL_TIM_OC_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_TIM_OC_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief Starts the TIM Output Compare signal generation. + * @param htim : TIM Output Compare handle + * @param Channel : TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status +*/ +HAL_StatusTypeDef HAL_TIM_OC_Start(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Enable the Output compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + /* Enable the Peripheral */ + __HAL_TIM_ENABLE(htim); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Output Compare signal generation. + * @param htim : TIM handle + * @param Channel : TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status +*/ +HAL_StatusTypeDef HAL_TIM_OC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Disable the Output compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Output Compare signal generation in interrupt mode. + * @param htim : TIM OC handle + * @param Channel : TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status +*/ +HAL_StatusTypeDef HAL_TIM_OC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Enable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + } + break; + + case TIM_CHANNEL_2: + { + /* Enable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + } + break; + + case TIM_CHANNEL_3: + { + /* Enable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3); + } + break; + + case TIM_CHANNEL_4: + { + /* Enable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4); + } + break; + + default: + break; + } + + /* Enable the Output compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + /* Enable the Peripheral */ + __HAL_TIM_ENABLE(htim); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Output Compare signal generation in interrupt mode. + * @param htim : TIM Output Compare handle + * @param Channel : TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status +*/ +HAL_StatusTypeDef HAL_TIM_OC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + } + break; + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + } + break; + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3); + } + break; + + case TIM_CHANNEL_4: + { + /* Disable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4); + } + break; + + default: + break; + } + + /* Disable the Output compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Output Compare signal generation in DMA mode. + * @param htim : TIM Output Compare handle + * @param Channel : TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @param pData: The source Buffer address. + * @param Length: The length of data to be transferred from memory to TIM peripheral + * @retval HAL status +*/ +HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + if((htim->State == HAL_TIM_STATE_BUSY)) + { + return HAL_BUSY; + } + else if((htim->State == HAL_TIM_STATE_READY)) + { + if(((uint32_t)pData == 0 ) && (Length > 0)) + { + return HAL_ERROR; + } + else + { + htim->State = HAL_TIM_STATE_BUSY; + } + } + else + { + return HAL_ERROR; + } + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Set the DMA Period elapsed callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length); + + /* Enable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + } + break; + + case TIM_CHANNEL_2: + { + /* Set the DMA Period elapsed callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length); + + /* Enable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + } + break; + + case TIM_CHANNEL_3: + { + /* Set the DMA Period elapsed callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3,Length); + + /* Enable the TIM Capture/Compare 3 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3); + } + break; + + case TIM_CHANNEL_4: + { + /* Set the DMA Period elapsed callback */ + htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, Length); + + /* Enable the TIM Capture/Compare 4 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4); + } + break; + + default: + break; + } + + /* Enable the Output compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + /* Enable the Peripheral */ + __HAL_TIM_ENABLE(htim); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Output Compare signal generation in DMA mode. + * @param htim : TIM Output Compare handle + * @param Channel : TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status +*/ +HAL_StatusTypeDef HAL_TIM_OC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + } + break; + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); + } + break; + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3); + } + break; + + case TIM_CHANNEL_4: + { + /* Disable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4); + } + break; + + default: + break; + } + + /* Disable the Output compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Change the htim state */ + htim->State = HAL_TIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group3 Time PWM functions + * @brief Time PWM functions + * +@verbatim + ============================================================================== + ##### Time PWM functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the TIM PWM. + (+) De-initialize the TIM PWM. + (+) Start the Time PWM. + (+) Stop the Time PWM. + (+) Start the Time PWM and enable interrupt. + (+) Stop the Time PWM and disable interrupt. + (+) Start the Time PWM and enable DMA transfer. + (+) Stop the Time PWM and disable DMA transfer. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the TIM PWM Time Base according to the specified + * parameters in the TIM_HandleTypeDef and create the associated handle. + * @param htim: TIM handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_Init(TIM_HandleTypeDef *htim) +{ + /* Check the TIM handle allocation */ + if(htim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); + assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + + if(htim->State == HAL_TIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + htim->Lock = HAL_UNLOCKED; + + /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_PWM_MspInit(htim); + } + + /* Set the TIM state */ + htim->State= HAL_TIM_STATE_BUSY; + + /* Init the base time for the PWM */ + TIM_Base_SetConfig(htim->Instance, &htim->Init); + + /* Initialize the TIM state*/ + htim->State= HAL_TIM_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the TIM peripheral + * @param htim: TIM handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_DeInit(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Disable the TIM Peripheral Clock */ + __HAL_TIM_DISABLE(htim); + + /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_PWM_MspDeInit(htim); + + /* Change TIM state */ + htim->State = HAL_TIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM PWM MSP. + * @param htim: TIM handle + * @retval None + */ +__weak void HAL_TIM_PWM_MspInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_TIM_PWM_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes TIM PWM MSP. + * @param htim: TIM handle + * @retval None + */ +__weak void HAL_TIM_PWM_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_TIM_PWM_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief Starts the PWM signal generation. + * @param htim : TIM handle + * @param Channel : TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status +*/ +HAL_StatusTypeDef HAL_TIM_PWM_Start(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Enable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + /* Enable the Peripheral */ + __HAL_TIM_ENABLE(htim); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the PWM signal generation. + * @param htim : TIM handle + * @param Channel : TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status +*/ +HAL_StatusTypeDef HAL_TIM_PWM_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Disable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Change the htim state */ + htim->State = HAL_TIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the PWM signal generation in interrupt mode. + * @param htim : TIM handle + * @param Channel : TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status +*/ +HAL_StatusTypeDef HAL_TIM_PWM_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Enable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + } + break; + + case TIM_CHANNEL_2: + { + /* Enable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + } + break; + + case TIM_CHANNEL_3: + { + /* Enable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3); + } + break; + + case TIM_CHANNEL_4: + { + /* Enable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4); + } + break; + + default: + break; + } + + /* Enable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + /* Enable the Peripheral */ + __HAL_TIM_ENABLE(htim); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the PWM signal generation in interrupt mode. + * @param htim : TIM handle + * @param Channel : TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status +*/ +HAL_StatusTypeDef HAL_TIM_PWM_Stop_IT (TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + } + break; + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + } + break; + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3); + } + break; + + case TIM_CHANNEL_4: + { + /* Disable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4); + } + break; + + default: + break; + } + + /* Disable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM PWM signal generation in DMA mode. + * @param htim : TIM handle + * @param Channel : TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @param pData: The source Buffer address. + * @param Length: The length of data to be transferred from memory to TIM peripheral + * @retval HAL status +*/ +HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + if((htim->State == HAL_TIM_STATE_BUSY)) + { + return HAL_BUSY; + } + else if((htim->State == HAL_TIM_STATE_READY)) + { + if(((uint32_t)pData == 0 ) && (Length > 0)) + { + return HAL_ERROR; + } + else + { + htim->State = HAL_TIM_STATE_BUSY; + } + } + else + { + return HAL_ERROR; + } + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Set the DMA Period elapsed callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length); + + /* Enable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + } + break; + + case TIM_CHANNEL_2: + { + /* Set the DMA Period elapsed callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length); + + /* Enable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + } + break; + + case TIM_CHANNEL_3: + { + /* Set the DMA Period elapsed callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3,Length); + + /* Enable the TIM Output Capture/Compare 3 request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3); + } + break; + + case TIM_CHANNEL_4: + { + /* Set the DMA Period elapsed callback */ + htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, Length); + + /* Enable the TIM Capture/Compare 4 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4); + } + break; + + default: + break; + } + + /* Enable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + /* Enable the Peripheral */ + __HAL_TIM_ENABLE(htim); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM PWM signal generation in DMA mode. + * @param htim : TIM handle + * @param Channel : TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status +*/ +HAL_StatusTypeDef HAL_TIM_PWM_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + } + break; + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); + } + break; + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3); + } + break; + + case TIM_CHANNEL_4: + { + /* Disable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4); + } + break; + + default: + break; + } + + /* Disable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Change the htim state */ + htim->State = HAL_TIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group4 Time Input Capture functions + * @brief Time Input Capture functions + * +@verbatim + ============================================================================== + ##### Time Input Capture functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the TIM Input Capture. + (+) De-initialize the TIM Input Capture. + (+) Start the Time Input Capture. + (+) Stop the Time Input Capture. + (+) Start the Time Input Capture and enable interrupt. + (+) Stop the Time Input Capture and disable interrupt. + (+) Start the Time Input Capture and enable DMA transfer. + (+) Stop the Time Input Capture and disable DMA transfer. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the TIM Input Capture Time base according to the specified + * parameters in the TIM_HandleTypeDef and create the associated handle. + * @param htim: TIM Input Capture handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_Init(TIM_HandleTypeDef *htim) +{ + /* Check the TIM handle allocation */ + if(htim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); + assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + + if(htim->State == HAL_TIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + htim->Lock = HAL_UNLOCKED; + + /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_IC_MspInit(htim); + } + + /* Set the TIM state */ + htim->State= HAL_TIM_STATE_BUSY; + + /* Init the base time for the input capture */ + TIM_Base_SetConfig(htim->Instance, &htim->Init); + + /* Initialize the TIM state*/ + htim->State= HAL_TIM_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the TIM peripheral + * @param htim: TIM Input Capture handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_DeInit(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Disable the TIM Peripheral Clock */ + __HAL_TIM_DISABLE(htim); + + /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_IC_MspDeInit(htim); + + /* Change TIM state */ + htim->State = HAL_TIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM Input Capture MSP. + * @param htim: TIM handle + * @retval None + */ +__weak void HAL_TIM_IC_MspInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_TIM_IC_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes TIM Input Capture MSP. + * @param htim: TIM handle + * @retval None + */ +__weak void HAL_TIM_IC_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_TIM_IC_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief Starts the TIM Input Capture measurement. + * @param htim : TIM Input Capture handle + * @param Channel : TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status +*/ +HAL_StatusTypeDef HAL_TIM_IC_Start (TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Enable the Input Capture channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + /* Enable the Peripheral */ + __HAL_TIM_ENABLE(htim); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Input Capture measurement. + * @param htim : TIM handle + * @param Channel : TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status +*/ +HAL_StatusTypeDef HAL_TIM_IC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Disable the Input Capture channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Input Capture measurement in interrupt mode. + * @param htim : TIM Input Capture handle + * @param Channel : TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status +*/ +HAL_StatusTypeDef HAL_TIM_IC_Start_IT (TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Enable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + } + break; + + case TIM_CHANNEL_2: + { + /* Enable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + } + break; + + case TIM_CHANNEL_3: + { + /* Enable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3); + } + break; + + case TIM_CHANNEL_4: + { + /* Enable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4); + } + break; + + default: + break; + } + /* Enable the Input Capture channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + /* Enable the Peripheral */ + __HAL_TIM_ENABLE(htim); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Input Capture measurement in interrupt mode. + * @param htim : TIM handle + * @param Channel : TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status +*/ +HAL_StatusTypeDef HAL_TIM_IC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + } + break; + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + } + break; + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3); + } + break; + + case TIM_CHANNEL_4: + { + /* Disable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4); + } + break; + + default: + break; + } + + /* Disable the Input Capture channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Input Capture measurement in DMA mode. + * @param htim : TIM Input Capture handle + * @param Channel : TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @param pData: The destination Buffer address. + * @param Length: The length of data to be transferred from TIM peripheral to memory. + * @retval HAL status +*/ +HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance)); + + if((htim->State == HAL_TIM_STATE_BUSY)) + { + return HAL_BUSY; + } + else if((htim->State == HAL_TIM_STATE_READY)) + { + if((pData == 0 ) && (Length > 0)) + { + return HAL_ERROR; + } + else + { + htim->State = HAL_TIM_STATE_BUSY; + } + } + else + { + return HAL_ERROR; + } + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Set the DMA Period elapsed callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData, Length); + + /* Enable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + } + break; + + case TIM_CHANNEL_2: + { + /* Set the DMA Period elapsed callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData, Length); + + /* Enable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + } + break; + + case TIM_CHANNEL_3: + { + /* Set the DMA Period elapsed callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMACaptureCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)&htim->Instance->CCR3, (uint32_t)pData, Length); + + /* Enable the TIM Capture/Compare 3 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3); + } + break; + + case TIM_CHANNEL_4: + { + /* Set the DMA Period elapsed callback */ + htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMACaptureCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)&htim->Instance->CCR4, (uint32_t)pData, Length); + + /* Enable the TIM Capture/Compare 4 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4); + } + break; + + default: + break; + } + + /* Enable the Input Capture channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + /* Enable the Peripheral */ + __HAL_TIM_ENABLE(htim); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Input Capture measurement in DMA mode. + * @param htim : TIM Input Capture handle + * @param Channel : TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status +*/ +HAL_StatusTypeDef HAL_TIM_IC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + } + break; + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); + } + break; + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3); + } + break; + + case TIM_CHANNEL_4: + { + /* Disable the TIM Capture/Compare 4 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4); + } + break; + + default: + break; + } + + /* Disable the Input Capture channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Change the htim state */ + htim->State = HAL_TIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group5 Time One Pulse functions + * @brief Time One Pulse functions + * +@verbatim + ============================================================================== + ##### Time One Pulse functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the TIM One Pulse. + (+) De-initialize the TIM One Pulse. + (+) Start the Time One Pulse. + (+) Stop the Time One Pulse. + (+) Start the Time One Pulse and enable interrupt. + (+) Stop the Time One Pulse and disable interrupt. + (+) Start the Time One Pulse and enable DMA transfer. + (+) Stop the Time One Pulse and disable DMA transfer. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the TIM One Pulse Time Base according to the specified + * parameters in the TIM_HandleTypeDef and create the associated handle. + * @param htim: TIM OnePulse handle + * @param OnePulseMode: Select the One pulse mode. + * This parameter can be one of the following values: + * @arg TIM_OPMODE_SINGLE: Only one pulse will be generated. + * @arg TIM_OPMODE_REPETITIVE: Repetitive pulses wil be generated. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OnePulse_Init(TIM_HandleTypeDef *htim, uint32_t OnePulseMode) +{ + /* Check the TIM handle allocation */ + if(htim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); + assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + assert_param(IS_TIM_OPM_MODE(OnePulseMode)); + + if(htim->State == HAL_TIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + htim->Lock = HAL_UNLOCKED; + + /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_OnePulse_MspInit(htim); + } + + /* Set the TIM state */ + htim->State= HAL_TIM_STATE_BUSY; + + /* Configure the Time base in the One Pulse Mode */ + TIM_Base_SetConfig(htim->Instance, &htim->Init); + + /* Reset the OPM Bit */ + htim->Instance->CR1 &= ~TIM_CR1_OPM; + + /* Configure the OPM Mode */ + htim->Instance->CR1 |= OnePulseMode; + + /* Initialize the TIM state*/ + htim->State= HAL_TIM_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the TIM One Pulse + * @param htim: TIM One Pulse handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OnePulse_DeInit(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Disable the TIM Peripheral Clock */ + __HAL_TIM_DISABLE(htim); + + /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ + HAL_TIM_OnePulse_MspDeInit(htim); + + /* Change TIM state */ + htim->State = HAL_TIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM One Pulse MSP. + * @param htim: TIM handle + * @retval None + */ +__weak void HAL_TIM_OnePulse_MspInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_TIM_OnePulse_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes TIM One Pulse MSP. + * @param htim: TIM handle + * @retval None + */ +__weak void HAL_TIM_OnePulse_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_TIM_OnePulse_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief Starts the TIM One Pulse signal generation. + * @param htim : TIM One Pulse handle + * @param OutputChannel : TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @retval HAL status +*/ +HAL_StatusTypeDef HAL_TIM_OnePulse_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + /* Enable the Capture compare and the Input Capture channels + (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) + if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and + if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output + in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be enabled together + + No need to enable the counter, it's enabled automatically by hardware + (the counter starts in response to a stimulus and generate a pulse */ + + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM One Pulse signal generation. + * @param htim : TIM One Pulse handle + * @param OutputChannel : TIM Channels to be disable + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @retval HAL status +*/ +HAL_StatusTypeDef HAL_TIM_OnePulse_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + /* Disable the Capture compare and the Input Capture channels + (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) + if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and + if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output + in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be disabled together */ + + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM One Pulse signal generation in interrupt mode. + * @param htim : TIM One Pulse handle + * @param OutputChannel : TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @retval HAL status +*/ +HAL_StatusTypeDef HAL_TIM_OnePulse_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + /* Enable the Capture compare and the Input Capture channels + (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) + if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and + if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output + in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be enabled together + + No need to enable the counter, it's enabled automatically by hardware + (the counter starts in response to a stimulus and generate a pulse */ + + /* Enable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + + /* Enable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM One Pulse signal generation in interrupt mode. + * @param htim : TIM One Pulse handle + * @param OutputChannel : TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @retval HAL status +*/ +HAL_StatusTypeDef HAL_TIM_OnePulse_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + /* Disable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + + /* Disable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + + /* Disable the Capture compare and the Input Capture channels + (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) + if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and + if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output + in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be disabled together */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group6 Time Encoder functions + * @brief Time Encoder functions + * +@verbatim + ============================================================================== + ##### Time Encoder functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the TIM Encoder. + (+) De-initialize the TIM Encoder. + (+) Start the Time Encoder. + (+) Stop the Time Encoder. + (+) Start the Time Encoder and enable interrupt. + (+) Stop the Time Encoder and disable interrupt. + (+) Start the Time Encoder and enable DMA transfer. + (+) Stop the Time Encoder and disable DMA transfer. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the TIM Encoder Interface and create the associated handle. + * @param htim: TIM Encoder Interface handle + * @param sConfig: TIM Encoder Interface configuration structure + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_Init(TIM_HandleTypeDef *htim, TIM_Encoder_InitTypeDef* sConfig) +{ + uint32_t tmpsmcr = 0; + uint32_t tmpccmr1 = 0; + uint32_t tmpccer = 0; + + /* Check the TIM handle allocation */ + if(htim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + assert_param(IS_TIM_ENCODER_MODE(sConfig->EncoderMode)); + assert_param(IS_TIM_IC_SELECTION(sConfig->IC1Selection)); + assert_param(IS_TIM_IC_SELECTION(sConfig->IC2Selection)); + assert_param(IS_TIM_IC_POLARITY(sConfig->IC1Polarity)); + assert_param(IS_TIM_IC_POLARITY(sConfig->IC2Polarity)); + assert_param(IS_TIM_IC_PRESCALER(sConfig->IC1Prescaler)); + assert_param(IS_TIM_IC_PRESCALER(sConfig->IC2Prescaler)); + assert_param(IS_TIM_IC_FILTER(sConfig->IC1Filter)); + assert_param(IS_TIM_IC_FILTER(sConfig->IC2Filter)); + + if(htim->State == HAL_TIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + htim->Lock = HAL_UNLOCKED; + + /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_Encoder_MspInit(htim); + } + + /* Set the TIM state */ + htim->State= HAL_TIM_STATE_BUSY; + + /* Reset the SMS bits */ + htim->Instance->SMCR &= ~TIM_SMCR_SMS; + + /* Configure the Time base in the Encoder Mode */ + TIM_Base_SetConfig(htim->Instance, &htim->Init); + + /* Get the TIMx SMCR register value */ + tmpsmcr = htim->Instance->SMCR; + + /* Get the TIMx CCMR1 register value */ + tmpccmr1 = htim->Instance->CCMR1; + + /* Get the TIMx CCER register value */ + tmpccer = htim->Instance->CCER; + + /* Set the encoder Mode */ + tmpsmcr |= sConfig->EncoderMode; + + /* Select the Capture Compare 1 and the Capture Compare 2 as input */ + tmpccmr1 &= ~(TIM_CCMR1_CC1S | TIM_CCMR1_CC2S); + tmpccmr1 |= (sConfig->IC1Selection | (sConfig->IC2Selection << 8)); + + /* Set the the Capture Compare 1 and the Capture Compare 2 prescalers and filters */ + tmpccmr1 &= ~(TIM_CCMR1_IC1PSC | TIM_CCMR1_IC2PSC); + tmpccmr1 &= ~(TIM_CCMR1_IC1F | TIM_CCMR1_IC2F); + tmpccmr1 |= sConfig->IC1Prescaler | (sConfig->IC2Prescaler << 8); + tmpccmr1 |= (sConfig->IC1Filter << 4) | (sConfig->IC2Filter << 12); + + /* Set the TI1 and the TI2 Polarities */ + tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC2P); + tmpccer &= ~(TIM_CCER_CC1NP | TIM_CCER_CC2NP); + tmpccer |= sConfig->IC1Polarity | (sConfig->IC2Polarity << 4); + + /* Write to TIMx SMCR */ + htim->Instance->SMCR = tmpsmcr; + + /* Write to TIMx CCMR1 */ + htim->Instance->CCMR1 = tmpccmr1; + + /* Write to TIMx CCER */ + htim->Instance->CCER = tmpccer; + + /* Initialize the TIM state*/ + htim->State= HAL_TIM_STATE_READY; + + return HAL_OK; +} + + +/** + * @brief DeInitializes the TIM Encoder interface + * @param htim: TIM Encoder handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_DeInit(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Disable the TIM Peripheral Clock */ + __HAL_TIM_DISABLE(htim); + + /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ + HAL_TIM_Encoder_MspDeInit(htim); + + /* Change TIM state */ + htim->State = HAL_TIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM Encoder Interface MSP. + * @param htim: TIM handle + * @retval None + */ +__weak void HAL_TIM_Encoder_MspInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_TIM_Encoder_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes TIM Encoder Interface MSP. + * @param htim: TIM handle + * @retval None + */ +__weak void HAL_TIM_Encoder_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_TIM_Encoder_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief Starts the TIM Encoder Interface. + * @param htim : TIM Encoder Interface handle + * @param Channel : TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected + * @retval HAL status +*/ +HAL_StatusTypeDef HAL_TIM_Encoder_Start(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + + /* Enable the encoder interface channels */ + switch (Channel) + { + case TIM_CHANNEL_1: + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + break; + } + case TIM_CHANNEL_2: + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + break; + } + default : + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + break; + } + } + /* Enable the Peripheral */ + __HAL_TIM_ENABLE(htim); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Encoder Interface. + * @param htim : TIM Encoder Interface handle + * @param Channel : TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected + * @retval HAL status +*/ +HAL_StatusTypeDef HAL_TIM_Encoder_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + + /* Disable the Input Capture channels 1 and 2 + (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */ + switch (Channel) + { + case TIM_CHANNEL_1: + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + break; + } + case TIM_CHANNEL_2: + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + break; + } + default : + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + break; + } + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Encoder Interface in interrupt mode. + * @param htim : TIM Encoder Interface handle + * @param Channel : TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected + * @retval HAL status +*/ +HAL_StatusTypeDef HAL_TIM_Encoder_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + + /* Enable the encoder interface channels */ + /* Enable the capture compare Interrupts 1 and/or 2 */ + switch (Channel) + { + case TIM_CHANNEL_1: + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + break; + } + case TIM_CHANNEL_2: + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + break; + } + default : + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + break; + } + } + + /* Enable the Peripheral */ + __HAL_TIM_ENABLE(htim); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Encoder Interface in interrupt mode. + * @param htim : TIM Encoder Interface handle + * @param Channel : TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected + * @retval HAL status +*/ +HAL_StatusTypeDef HAL_TIM_Encoder_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + + /* Disable the Input Capture channels 1 and 2 + (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */ + if(Channel == TIM_CHANNEL_1) + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + + /* Disable the capture compare Interrupts 1 */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + } + else if(Channel == TIM_CHANNEL_2) + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + + /* Disable the capture compare Interrupts 2 */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + } + else + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + + /* Disable the capture compare Interrupts 1 and 2 */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Change the htim state */ + htim->State = HAL_TIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Encoder Interface in DMA mode. + * @param htim : TIM Encoder Interface handle + * @param Channel : TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected + * @param pData1: The destination Buffer address for IC1. + * @param pData2: The destination Buffer address for IC2. + * @param Length: The length of data to be transferred from TIM peripheral to memory. + * @retval HAL status +*/ +HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData1, uint32_t *pData2, uint16_t Length) +{ + /* Check the parameters */ + assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance)); + + if((htim->State == HAL_TIM_STATE_BUSY)) + { + return HAL_BUSY; + } + else if((htim->State == HAL_TIM_STATE_READY)) + { + if((((pData1 == 0) || (pData2 == 0) )) && (Length > 0)) + { + return HAL_ERROR; + } + else + { + htim->State = HAL_TIM_STATE_BUSY; + } + } + else + { + return HAL_ERROR; + } + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Set the DMA Period elapsed callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t )pData1, Length); + + /* Enable the TIM Input Capture DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + + /* Enable the Peripheral */ + __HAL_TIM_ENABLE(htim); + + /* Enable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + } + break; + + case TIM_CHANNEL_2: + { + /* Set the DMA Period elapsed callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError; + /* Enable the DMA channel */ + HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData2, Length); + + /* Enable the TIM Input Capture DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + + /* Enable the Peripheral */ + __HAL_TIM_ENABLE(htim); + + /* Enable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + } + break; + + case TIM_CHANNEL_ALL: + { + /* Set the DMA Period elapsed callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData1, Length); + + /* Set the DMA Period elapsed callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData2, Length); + + /* Enable the Peripheral */ + __HAL_TIM_ENABLE(htim); + + /* Enable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + + /* Enable the TIM Input Capture DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + /* Enable the TIM Input Capture DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + } + break; + + default: + break; + } + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Encoder Interface in DMA mode. + * @param htim : TIM Encoder Interface handle + * @param Channel : TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected + * @retval HAL status +*/ +HAL_StatusTypeDef HAL_TIM_Encoder_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance)); + + /* Disable the Input Capture channels 1 and 2 + (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */ + if(Channel == TIM_CHANNEL_1) + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + + /* Disable the capture compare DMA Request 1 */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + } + else if(Channel == TIM_CHANNEL_2) + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + + /* Disable the capture compare DMA Request 2 */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); + } + else + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + + /* Disable the capture compare DMA Request 1 and 2 */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Change the htim state */ + htim->State = HAL_TIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ +/** @defgroup TIM_Exported_Functions_Group7 TIM IRQ handler management + * @brief IRQ handler management + * +@verbatim + ============================================================================== + ##### IRQ handler management ##### + ============================================================================== + [..] + This section provides Timer IRQ handler function. + +@endverbatim + * @{ + */ +/** + * @brief This function handles TIM interrupts requests. + * @param htim: TIM handle + * @retval None + */ +void HAL_TIM_IRQHandler(TIM_HandleTypeDef *htim) +{ + /* Capture compare 1 event */ + if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC1) != RESET) + { + if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC1) !=RESET) + { + { + __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC1); + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + + /* Input capture event */ + if((htim->Instance->CCMR1 & TIM_CCMR1_CC1S) != 0x00) + { + HAL_TIM_IC_CaptureCallback(htim); + } + /* Output compare event */ + else + { + HAL_TIM_OC_DelayElapsedCallback(htim); + HAL_TIM_PWM_PulseFinishedCallback(htim); + } + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; + } + } + } + /* Capture compare 2 event */ + if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC2) != RESET) + { + if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC2) !=RESET) + { + __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC2); + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + /* Input capture event */ + if((htim->Instance->CCMR1 & TIM_CCMR1_CC2S) != 0x00) + { + HAL_TIM_IC_CaptureCallback(htim); + } + /* Output compare event */ + else + { + HAL_TIM_OC_DelayElapsedCallback(htim); + HAL_TIM_PWM_PulseFinishedCallback(htim); + } + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; + } + } + /* Capture compare 3 event */ + if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC3) != RESET) + { + if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC3) !=RESET) + { + __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC3); + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + /* Input capture event */ + if((htim->Instance->CCMR2 & TIM_CCMR2_CC3S) != 0x00) + { + HAL_TIM_IC_CaptureCallback(htim); + } + /* Output compare event */ + else + { + HAL_TIM_OC_DelayElapsedCallback(htim); + HAL_TIM_PWM_PulseFinishedCallback(htim); + } + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; + } + } + /* Capture compare 4 event */ + if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC4) != RESET) + { + if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC4) !=RESET) + { + __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC4); + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; + /* Input capture event */ + if((htim->Instance->CCMR2 & TIM_CCMR2_CC4S) != 0x00) + { + HAL_TIM_IC_CaptureCallback(htim); + } + /* Output compare event */ + else + { + HAL_TIM_OC_DelayElapsedCallback(htim); + HAL_TIM_PWM_PulseFinishedCallback(htim); + } + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; + } + } + /* TIM Update event */ + if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_UPDATE) != RESET) + { + if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_UPDATE) !=RESET) + { + __HAL_TIM_CLEAR_IT(htim, TIM_IT_UPDATE); + HAL_TIM_PeriodElapsedCallback(htim); + } + } + /* TIM Trigger detection event */ + if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_TRIGGER) != RESET) + { + if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_TRIGGER) !=RESET) + { + __HAL_TIM_CLEAR_IT(htim, TIM_IT_TRIGGER); + HAL_TIM_TriggerCallback(htim); + } + } +} + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group8 Peripheral Control functions + * @brief Peripheral Control functions + * +@verbatim + ============================================================================== + ##### Peripheral Control functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Configure The Input Output channels for OC, PWM, IC or One Pulse mode. + (+) Configure External Clock source. + (+) Configure Complementary channels, break features and dead time. + (+) Configure Master and the Slave synchronization. + (+) Configure the DMA Burst Mode. + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the TIM Output Compare Channels according to the specified + * parameters in the TIM_OC_InitTypeDef. + * @param htim: TIM Output Compare handle + * @param sConfig: TIM Output Compare configuration structure + * @param Channel : TIM Channels to configure + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef* sConfig, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CHANNELS(Channel)); + assert_param(IS_TIM_OC_MODE(sConfig->OCMode)); + assert_param(IS_TIM_OC_POLARITY(sConfig->OCPolarity)); + + /* Check input state */ + __HAL_LOCK(htim); + + htim->State = HAL_TIM_STATE_BUSY; + + switch (Channel) + { + case TIM_CHANNEL_1: + { + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + /* Configure the TIM Channel 1 in Output Compare */ + TIM_OC1_SetConfig(htim->Instance, sConfig); + } + break; + + case TIM_CHANNEL_2: + { + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + /* Configure the TIM Channel 2 in Output Compare */ + TIM_OC2_SetConfig(htim->Instance, sConfig); + } + break; + + case TIM_CHANNEL_3: + { + assert_param(IS_TIM_CC3_INSTANCE(htim->Instance)); + /* Configure the TIM Channel 3 in Output Compare */ + TIM_OC3_SetConfig(htim->Instance, sConfig); + } + break; + + case TIM_CHANNEL_4: + { + assert_param(IS_TIM_CC4_INSTANCE(htim->Instance)); + /* Configure the TIM Channel 4 in Output Compare */ + TIM_OC4_SetConfig(htim->Instance, sConfig); + } + break; + + default: + break; + } + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM Input Capture Channels according to the specified + * parameters in the TIM_IC_InitTypeDef. + * @param htim: TIM IC handle + * @param sConfig: TIM Input Capture configuration structure + * @param Channel : TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_IC_InitTypeDef* sConfig, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + assert_param(IS_TIM_IC_POLARITY(sConfig->ICPolarity)); + assert_param(IS_TIM_IC_SELECTION(sConfig->ICSelection)); + assert_param(IS_TIM_IC_PRESCALER(sConfig->ICPrescaler)); + assert_param(IS_TIM_IC_FILTER(sConfig->ICFilter)); + + __HAL_LOCK(htim); + + htim->State = HAL_TIM_STATE_BUSY; + + if (Channel == TIM_CHANNEL_1) + { + /* TI1 Configuration */ + TIM_TI1_SetConfig(htim->Instance, + sConfig->ICPolarity, + sConfig->ICSelection, + sConfig->ICFilter); + + /* Reset the IC1PSC Bits */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC; + + /* Set the IC1PSC value */ + htim->Instance->CCMR1 |= sConfig->ICPrescaler; + } + else if (Channel == TIM_CHANNEL_2) + { + /* TI2 Configuration */ + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + + TIM_TI2_SetConfig(htim->Instance, + sConfig->ICPolarity, + sConfig->ICSelection, + sConfig->ICFilter); + + /* Reset the IC2PSC Bits */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC; + + /* Set the IC2PSC value */ + htim->Instance->CCMR1 |= (sConfig->ICPrescaler << 8); + } + else if (Channel == TIM_CHANNEL_3) + { + /* TI3 Configuration */ + assert_param(IS_TIM_CC3_INSTANCE(htim->Instance)); + + TIM_TI3_SetConfig(htim->Instance, + sConfig->ICPolarity, + sConfig->ICSelection, + sConfig->ICFilter); + + /* Reset the IC3PSC Bits */ + htim->Instance->CCMR2 &= ~TIM_CCMR2_IC3PSC; + + /* Set the IC3PSC value */ + htim->Instance->CCMR2 |= sConfig->ICPrescaler; + } + else + { + /* TI4 Configuration */ + assert_param(IS_TIM_CC4_INSTANCE(htim->Instance)); + + TIM_TI4_SetConfig(htim->Instance, + sConfig->ICPolarity, + sConfig->ICSelection, + sConfig->ICFilter); + + /* Reset the IC4PSC Bits */ + htim->Instance->CCMR2 &= ~TIM_CCMR2_IC4PSC; + + /* Set the IC4PSC value */ + htim->Instance->CCMR2 |= (sConfig->ICPrescaler << 8); + } + + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM PWM channels according to the specified + * parameters in the TIM_OC_InitTypeDef. + * @param htim: TIM PWM handle + * @param sConfig: TIM PWM configuration structure + * @param Channel : TIM Channels to be configured + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef* sConfig, uint32_t Channel) +{ + __HAL_LOCK(htim); + + /* Check the parameters */ + assert_param(IS_TIM_CHANNELS(Channel)); + assert_param(IS_TIM_PWM_MODE(sConfig->OCMode)); + assert_param(IS_TIM_OC_POLARITY(sConfig->OCPolarity)); + assert_param(IS_TIM_FAST_STATE(sConfig->OCFastMode)); + + htim->State = HAL_TIM_STATE_BUSY; + + switch (Channel) + { + case TIM_CHANNEL_1: + { + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + /* Configure the Channel 1 in PWM mode */ + TIM_OC1_SetConfig(htim->Instance, sConfig); + + /* Set the Preload enable bit for channel1 */ + htim->Instance->CCMR1 |= TIM_CCMR1_OC1PE; + + /* Configure the Output Fast mode */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_OC1FE; + htim->Instance->CCMR1 |= sConfig->OCFastMode; + } + break; + + case TIM_CHANNEL_2: + { + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + /* Configure the Channel 2 in PWM mode */ + TIM_OC2_SetConfig(htim->Instance, sConfig); + + /* Set the Preload enable bit for channel2 */ + htim->Instance->CCMR1 |= TIM_CCMR1_OC2PE; + + /* Configure the Output Fast mode */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_OC2FE; + htim->Instance->CCMR1 |= sConfig->OCFastMode << 8; + } + break; + + case TIM_CHANNEL_3: + { + assert_param(IS_TIM_CC3_INSTANCE(htim->Instance)); + /* Configure the Channel 3 in PWM mode */ + TIM_OC3_SetConfig(htim->Instance, sConfig); + + /* Set the Preload enable bit for channel3 */ + htim->Instance->CCMR2 |= TIM_CCMR2_OC3PE; + + /* Configure the Output Fast mode */ + htim->Instance->CCMR2 &= ~TIM_CCMR2_OC3FE; + htim->Instance->CCMR2 |= sConfig->OCFastMode; + } + break; + + case TIM_CHANNEL_4: + { + assert_param(IS_TIM_CC4_INSTANCE(htim->Instance)); + /* Configure the Channel 4 in PWM mode */ + TIM_OC4_SetConfig(htim->Instance, sConfig); + + /* Set the Preload enable bit for channel4 */ + htim->Instance->CCMR2 |= TIM_CCMR2_OC4PE; + + /* Configure the Output Fast mode */ + htim->Instance->CCMR2 &= ~TIM_CCMR2_OC4FE; + htim->Instance->CCMR2 |= sConfig->OCFastMode << 8; + } + break; + + default: + break; + } + + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM One Pulse Channels according to the specified + * parameters in the TIM_OnePulse_InitTypeDef. + * @param htim: TIM One Pulse handle + * @param sConfig: TIM One Pulse configuration structure + * @param OutputChannel : TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @param InputChannel : TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OnePulse_InitTypeDef* sConfig, uint32_t OutputChannel, uint32_t InputChannel) +{ + TIM_OC_InitTypeDef temp1; + + /* Check the parameters */ + assert_param(IS_TIM_OPM_CHANNELS(OutputChannel)); + assert_param(IS_TIM_OPM_CHANNELS(InputChannel)); + + if(OutputChannel != InputChannel) + { + __HAL_LOCK(htim); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Extract the Ouput compare configuration from sConfig structure */ + temp1.OCMode = sConfig->OCMode; + temp1.Pulse = sConfig->Pulse; + temp1.OCPolarity = sConfig->OCPolarity; + temp1.OCIdleState = sConfig->OCIdleState; + + switch (OutputChannel) + { + case TIM_CHANNEL_1: + { + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + + TIM_OC1_SetConfig(htim->Instance, &temp1); + } + break; + case TIM_CHANNEL_2: + { + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + + TIM_OC2_SetConfig(htim->Instance, &temp1); + } + break; + default: + break; + } + switch (InputChannel) + { + case TIM_CHANNEL_1: + { + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + + TIM_TI1_SetConfig(htim->Instance, sConfig->ICPolarity, + sConfig->ICSelection, sConfig->ICFilter); + + /* Reset the IC1PSC Bits */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC; + + /* Select the Trigger source */ + htim->Instance->SMCR &= ~TIM_SMCR_TS; + htim->Instance->SMCR |= TIM_TS_TI1FP1; + + /* Select the Slave Mode */ + htim->Instance->SMCR &= ~TIM_SMCR_SMS; + htim->Instance->SMCR |= TIM_SLAVEMODE_TRIGGER; + } + break; + case TIM_CHANNEL_2: + { + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + + TIM_TI2_SetConfig(htim->Instance, sConfig->ICPolarity, + sConfig->ICSelection, sConfig->ICFilter); + + /* Reset the IC2PSC Bits */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC; + + /* Select the Trigger source */ + htim->Instance->SMCR &= ~TIM_SMCR_TS; + htim->Instance->SMCR |= TIM_TS_TI2FP2; + + /* Select the Slave Mode */ + htim->Instance->SMCR &= ~TIM_SMCR_SMS; + htim->Instance->SMCR |= TIM_SLAVEMODE_TRIGGER; + } + break; + + default: + break; + } + + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + else + { + return HAL_ERROR; + } +} + +/** + * @brief Configure the DMA Burst to transfer Data from the memory to the TIM peripheral + * @param htim: TIM handle + * @param BurstBaseAddress : TIM Base address from where the DMA will start the Data write + * This parameter can be one of the following values: + * @arg TIM_DMABASE_CR1 + * @arg TIM_DMABASE_CR2 + * @arg TIM_DMABASE_SMCR + * @arg TIM_DMABASE_DIER + * @arg TIM_DMABASE_SR + * @arg TIM_DMABASE_EGR + * @arg TIM_DMABASE_CCMR1 + * @arg TIM_DMABASE_CCMR2 + * @arg TIM_DMABASE_CCER + * @arg TIM_DMABASE_CNT + * @arg TIM_DMABASE_PSC + * @arg TIM_DMABASE_ARR + * @arg TIM_DMABASE_CCR1 + * @arg TIM_DMABASE_CCR2 + * @arg TIM_DMABASE_CCR3 + * @arg TIM_DMABASE_CCR4 + * @arg TIM_DMABASE_DCR + * @param BurstRequestSrc: TIM DMA Request sources + * This parameter can be one of the following values: + * @arg TIM_DMA_UPDATE: TIM update Interrupt source + * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source + * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source + * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source + * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source + * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source + * @param BurstBuffer: The Buffer address. + * @param BurstLength: DMA Burst length. This parameter can be one value + * between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc, + uint32_t* BurstBuffer, uint32_t BurstLength) +{ + /* Check the parameters */ + assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance)); + assert_param(IS_TIM_DMA_BASE(BurstBaseAddress)); + assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc)); + assert_param(IS_TIM_DMA_LENGTH(BurstLength)); + + if((htim->State == HAL_TIM_STATE_BUSY)) + { + return HAL_BUSY; + } + else if((htim->State == HAL_TIM_STATE_READY)) + { + if((BurstBuffer == 0 ) && (BurstLength > 0)) + { + return HAL_ERROR; + } + else + { + htim->State = HAL_TIM_STATE_BUSY; + } + } + else + { + return HAL_ERROR; + } + + switch(BurstRequestSrc) + { + case TIM_DMA_UPDATE: + { + /* Set the DMA Period elapsed callback */ + htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8) + 1); + } + break; + case TIM_DMA_CC1: + { + /* Set the DMA Period elapsed callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8) + 1); + } + break; + case TIM_DMA_CC2: + { + /* Set the DMA Period elapsed callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8) + 1); + } + break; + case TIM_DMA_CC3: + { + /* Set the DMA Period elapsed callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8) + 1); + } + break; + case TIM_DMA_CC4: + { + /* Set the DMA Period elapsed callback */ + htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8) + 1); + } + break; + case TIM_DMA_TRIGGER: + { + /* Set the DMA Period elapsed callback */ + htim->hdma[TIM_DMA_ID_TRIGGER]->XferCpltCallback = TIM_DMATriggerCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_TRIGGER]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_TRIGGER], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8) + 1); + } + break; + default: + break; + } + /* configure the DMA Burst Mode */ + htim->Instance->DCR = BurstBaseAddress | BurstLength; + + /* Enable the TIM DMA Request */ + __HAL_TIM_ENABLE_DMA(htim, BurstRequestSrc); + + htim->State = HAL_TIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM DMA Burst mode + * @param htim: TIM handle + * @param BurstRequestSrc: TIM DMA Request sources to disable + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc) +{ + /* Check the parameters */ + assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc)); + + /* Abort the DMA transfer (at least disable the DMA channel) */ + switch(BurstRequestSrc) + { + case TIM_DMA_UPDATE: + { + HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_UPDATE]); + } + break; + case TIM_DMA_CC1: + { + HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC1]); + } + break; + case TIM_DMA_CC2: + { + HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC2]); + } + break; + case TIM_DMA_CC3: + { + HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC3]); + } + break; + case TIM_DMA_CC4: + { + HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC4]); + } + break; + case TIM_DMA_TRIGGER: + { + HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_TRIGGER]); + } + break; + default: + break; + } + + /* Disable the TIM Update DMA request */ + __HAL_TIM_DISABLE_DMA(htim, BurstRequestSrc); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Configure the DMA Burst to transfer Data from the TIM peripheral to the memory + * @param htim: TIM handle + * @param BurstBaseAddress : TIM Base address from where the DMA will starts the Data read + * This parameter can be one of the following values: + * @arg TIM_DMABASE_CR1 + * @arg TIM_DMABASE_CR2 + * @arg TIM_DMABASE_SMCR + * @arg TIM_DMABASE_DIER + * @arg TIM_DMABASE_SR + * @arg TIM_DMABASE_EGR + * @arg TIM_DMABASE_CCMR1 + * @arg TIM_DMABASE_CCMR2 + * @arg TIM_DMABASE_CCER + * @arg TIM_DMABASE_CNT + * @arg TIM_DMABASE_PSC + * @arg TIM_DMABASE_ARR + * @arg TIM_DMABASE_CCR1 + * @arg TIM_DMABASE_CCR2 + * @arg TIM_DMABASE_CCR3 + * @arg TIM_DMABASE_CCR4 + * @arg TIM_DMABASE_DCR + * @param BurstRequestSrc: TIM DMA Request sources + * This parameter can be one of the following values: + * @arg TIM_DMA_UPDATE: TIM update Interrupt source + * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source + * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source + * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source + * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source + * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source + * @param BurstBuffer: The Buffer address. + * @param BurstLength: DMA Burst length. This parameter can be one value + * between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc, + uint32_t *BurstBuffer, uint32_t BurstLength) +{ + /* Check the parameters */ + assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance)); + assert_param(IS_TIM_DMA_BASE(BurstBaseAddress)); + assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc)); + assert_param(IS_TIM_DMA_LENGTH(BurstLength)); + + if((htim->State == HAL_TIM_STATE_BUSY)) + { + return HAL_BUSY; + } + else if((htim->State == HAL_TIM_STATE_READY)) + { + if((BurstBuffer == 0 ) && (BurstLength > 0)) + { + return HAL_ERROR; + } + else + { + htim->State = HAL_TIM_STATE_BUSY; + } + } + else + { + return HAL_ERROR; + } + + switch(BurstRequestSrc) + { + case TIM_DMA_UPDATE: + { + /* Set the DMA Period elapsed callback */ + htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8) + 1); + } + break; + case TIM_DMA_CC1: + { + /* Set the DMA Period elapsed callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8) + 1); + } + break; + case TIM_DMA_CC2: + { + /* Set the DMA Period elapsed callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8) + 1); + } + break; + case TIM_DMA_CC3: + { + /* Set the DMA Period elapsed callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMACaptureCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8) + 1); + } + break; + case TIM_DMA_CC4: + { + /* Set the DMA Period elapsed callback */ + htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMACaptureCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8) + 1); + } + break; + case TIM_DMA_TRIGGER: + { + /* Set the DMA Period elapsed callback */ + htim->hdma[TIM_DMA_ID_TRIGGER]->XferCpltCallback = TIM_DMATriggerCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_TRIGGER]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_TRIGGER], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8) + 1); + } + break; + default: + break; + } + + /* configure the DMA Burst Mode */ + htim->Instance->DCR = BurstBaseAddress | BurstLength; + + /* Enable the TIM DMA Request */ + __HAL_TIM_ENABLE_DMA(htim, BurstRequestSrc); + + htim->State = HAL_TIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stop the DMA burst reading + * @param htim: TIM handle + * @param BurstRequestSrc: TIM DMA Request sources to disable. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc) +{ + /* Check the parameters */ + assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc)); + + /* Abort the DMA transfer (at least disable the DMA channel) */ + switch(BurstRequestSrc) + { + case TIM_DMA_UPDATE: + { + HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_UPDATE]); + } + break; + case TIM_DMA_CC1: + { + HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC1]); + } + break; + case TIM_DMA_CC2: + { + HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC2]); + } + break; + case TIM_DMA_CC3: + { + HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC3]); + } + break; + case TIM_DMA_CC4: + { + HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC4]); + } + break; + case TIM_DMA_TRIGGER: + { + HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_TRIGGER]); + } + break; + default: + break; + } + + /* Disable the TIM Update DMA request */ + __HAL_TIM_DISABLE_DMA(htim, BurstRequestSrc); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Generate a software event + * @param htim: TIM handle + * @param EventSource: specifies the event source. + * This parameter can be one of the following values: + * @arg TIM_EVENTSOURCE_UPDATE: Timer update Event source + * @arg TIM_EVENTSOURCE_CC1: Timer Capture Compare 1 Event source + * @arg TIM_EVENTSOURCE_CC2: Timer Capture Compare 2 Event source + * @arg TIM_EVENTSOURCE_CC3: Timer Capture Compare 3 Event source + * @arg TIM_EVENTSOURCE_CC4: Timer Capture Compare 4 Event source + * @arg TIM_EVENTSOURCE_TRIGGER: Timer Trigger Event source + * @note TIM6 and TIM7 can only generate an update event. + * @retval HAL status + */ + +HAL_StatusTypeDef HAL_TIM_GenerateEvent(TIM_HandleTypeDef *htim, uint32_t EventSource) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + assert_param(IS_TIM_EVENT_SOURCE(EventSource)); + + /* Process Locked */ + __HAL_LOCK(htim); + + /* Change the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Set the event sources */ + htim->Instance->EGR = EventSource; + + /* Change the TIM state */ + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Configures the OCRef clear feature + * @param htim: TIM handle + * @param sClearInputConfig: pointer to a TIM_ClearInputConfigTypeDef structure that + * contains the OCREF clear feature and parameters for the TIM peripheral. + * @param Channel: specifies the TIM Channel + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 + * @arg TIM_CHANNEL_2: TIM Channel 2 + * @arg TIM_CHANNEL_3: TIM Channel 3 + * @arg TIM_CHANNEL_4: TIM Channel 4 + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef *htim, TIM_ClearInputConfigTypeDef * sClearInputConfig, uint32_t Channel) +{ + + /* Check the parameters */ + assert_param(IS_TIM_OCXREF_CLEAR_INSTANCE(htim->Instance)); + assert_param(IS_TIM_CLEARINPUT_SOURCE(sClearInputConfig->ClearInputSource)); + assert_param(IS_TIM_CLEARINPUT_POLARITY(sClearInputConfig->ClearInputPolarity)); + assert_param(IS_TIM_CLEARINPUT_PRESCALER(sClearInputConfig->ClearInputPrescaler)); + assert_param(IS_TIM_CLEARINPUT_FILTER(sClearInputConfig->ClearInputFilter)); + + /* Process Locked */ + __HAL_LOCK(htim); + + htim->State = HAL_TIM_STATE_BUSY; + + switch (sClearInputConfig->ClearInputSource) + { + case TIM_CLEARINPUTSOURCE_NONE: + { + /* Clear the OCREF clear selection bit */ + CLEAR_BIT(htim->Instance->SMCR, TIM_SMCR_OCCS); + + /* Clear the ETR Bits */ + CLEAR_BIT(htim->Instance->SMCR, (TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP)); + + } + break; + + case TIM_CLEARINPUTSOURCE_OCREFCLR: + { + /* Clear the OCREF clear selection bit */ + CLEAR_BIT(htim->Instance->SMCR, TIM_SMCR_OCCS); + } + break; + + case TIM_CLEARINPUTSOURCE_ETR: + { + TIM_ETR_SetConfig(htim->Instance, + sClearInputConfig->ClearInputPrescaler, + sClearInputConfig->ClearInputPolarity, + sClearInputConfig->ClearInputFilter); + + /* Set the OCREF clear selection bit */ + SET_BIT(htim->Instance->SMCR, TIM_SMCR_OCCS); + } + break; + + default: + break; + + } + + switch (Channel) + { + case TIM_CHANNEL_1: + { + if(sClearInputConfig->ClearInputState != RESET) + { + /* Enable the Ocref clear feature for Channel 1 */ + htim->Instance->CCMR1 |= TIM_CCMR1_OC1CE; + } + else + { + /* Disable the Ocref clear feature for Channel 1 */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_OC1CE; + } + } + break; + case TIM_CHANNEL_2: + { + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + if(sClearInputConfig->ClearInputState != RESET) + { + /* Enable the Ocref clear feature for Channel 2 */ + htim->Instance->CCMR1 |= TIM_CCMR1_OC2CE; + } + else + { + /* Disable the Ocref clear feature for Channel 2 */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_OC2CE; + } + } + break; + case TIM_CHANNEL_3: + { + assert_param(IS_TIM_CC3_INSTANCE(htim->Instance)); + if(sClearInputConfig->ClearInputState != RESET) + { + /* Enable the Ocref clear feature for Channel 3 */ + htim->Instance->CCMR2 |= TIM_CCMR2_OC3CE; + } + else + { + /* Disable the Ocref clear feature for Channel 3 */ + htim->Instance->CCMR2 &= ~TIM_CCMR2_OC3CE; + } + } + break; + case TIM_CHANNEL_4: + { + assert_param(IS_TIM_CC4_INSTANCE(htim->Instance)); + if(sClearInputConfig->ClearInputState != RESET) + { + /* Enable the Ocref clear feature for Channel 4 */ + htim->Instance->CCMR2 |= TIM_CCMR2_OC4CE; + } + else + { + /* Disable the Ocref clear feature for Channel 4 */ + htim->Instance->CCMR2 &= ~TIM_CCMR2_OC4CE; + } + } + break; + default: + break; + } + + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Configures the clock source to be used + * @param htim: TIM handle + * @param sClockSourceConfig: pointer to a TIM_ClockConfigTypeDef structure that + * contains the clock source information for the TIM peripheral. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_ConfigClockSource(TIM_HandleTypeDef *htim, TIM_ClockConfigTypeDef * sClockSourceConfig) +{ + uint32_t tmpsmcr = 0; + + /* Process Locked */ + __HAL_LOCK(htim); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Check the parameters */ + assert_param(IS_TIM_CLOCKSOURCE(sClockSourceConfig->ClockSource)); + + /* Reset the SMS, TS, ECE, ETPS and ETRF bits */ + tmpsmcr = htim->Instance->SMCR; + tmpsmcr &= ~(TIM_SMCR_SMS | TIM_SMCR_TS); + tmpsmcr &= ~(TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP); + htim->Instance->SMCR = tmpsmcr; + + switch (sClockSourceConfig->ClockSource) + { + case TIM_CLOCKSOURCE_INTERNAL: + { + assert_param(IS_TIM_INSTANCE(htim->Instance)); + /* Disable slave mode to clock the prescaler directly with the internal clock */ + htim->Instance->SMCR &= ~TIM_SMCR_SMS; + } + break; + + case TIM_CLOCKSOURCE_ETRMODE1: + { + /* Check whether or not the timer instance supports external trigger input mode 1 (ETRF)*/ + assert_param(IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(htim->Instance)); + + /* Check ETR input conditioning related parameters */ + assert_param(IS_TIM_CLOCKPRESCALER(sClockSourceConfig->ClockPrescaler)); + assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity)); + assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter)); + + /* Configure the ETR Clock source */ + TIM_ETR_SetConfig(htim->Instance, + sClockSourceConfig->ClockPrescaler, + sClockSourceConfig->ClockPolarity, + sClockSourceConfig->ClockFilter); + /* Get the TIMx SMCR register value */ + tmpsmcr = htim->Instance->SMCR; + /* Reset the SMS and TS Bits */ + tmpsmcr &= ~(TIM_SMCR_SMS | TIM_SMCR_TS); + /* Select the External clock mode1 and the ETRF trigger */ + tmpsmcr |= (TIM_SLAVEMODE_EXTERNAL1 | TIM_CLOCKSOURCE_ETRMODE1); + /* Write to TIMx SMCR */ + htim->Instance->SMCR = tmpsmcr; + } + break; + + case TIM_CLOCKSOURCE_ETRMODE2: + { + /* Check whether or not the timer instance supports external trigger input mode 2 (ETRF)*/ + assert_param(IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(htim->Instance)); + + /* Check ETR input conditioning related parameters */ + assert_param(IS_TIM_CLOCKPRESCALER(sClockSourceConfig->ClockPrescaler)); + assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity)); + assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter)); + + /* Configure the ETR Clock source */ + TIM_ETR_SetConfig(htim->Instance, + sClockSourceConfig->ClockPrescaler, + sClockSourceConfig->ClockPolarity, + sClockSourceConfig->ClockFilter); + /* Enable the External clock mode2 */ + htim->Instance->SMCR |= TIM_SMCR_ECE; + } + break; + + case TIM_CLOCKSOURCE_TI1: + { + /* Check whether or not the timer instance supports external clock mode 1 */ + assert_param(IS_TIM_CLOCKSOURCE_TIX_INSTANCE(htim->Instance)); + + /* Check TI1 input conditioning related parameters */ + assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity)); + assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter)); + + TIM_TI1_ConfigInputStage(htim->Instance, + sClockSourceConfig->ClockPolarity, + sClockSourceConfig->ClockFilter); + TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI1); + } + break; + case TIM_CLOCKSOURCE_TI2: + { + /* Check whether or not the timer instance supports external clock mode 1 (ETRF)*/ + assert_param(IS_TIM_CLOCKSOURCE_TIX_INSTANCE(htim->Instance)); + + /* Check TI2 input conditioning related parameters */ + assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity)); + assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter)); + + TIM_TI2_ConfigInputStage(htim->Instance, + sClockSourceConfig->ClockPolarity, + sClockSourceConfig->ClockFilter); + TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI2); + } + break; + case TIM_CLOCKSOURCE_TI1ED: + { + /* Check whether or not the timer instance supports external clock mode 1 */ + assert_param(IS_TIM_CLOCKSOURCE_TIX_INSTANCE(htim->Instance)); + + /* Check TI1 input conditioning related parameters */ + assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity)); + assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter)); + + TIM_TI1_ConfigInputStage(htim->Instance, + sClockSourceConfig->ClockPolarity, + sClockSourceConfig->ClockFilter); + TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI1ED); + } + break; + case TIM_CLOCKSOURCE_ITR0: + { + /* Check whether or not the timer instance supports external clock mode 1 */ + assert_param(IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(htim->Instance)); + + TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_ITR0); + } + break; + case TIM_CLOCKSOURCE_ITR1: + { + /* Check whether or not the timer instance supports external clock mode 1 */ + assert_param(IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(htim->Instance)); + + TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_ITR1); + } + break; + case TIM_CLOCKSOURCE_ITR2: + { + /* Check whether or not the timer instance supports external clock mode 1 */ + assert_param(IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(htim->Instance)); + + TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_ITR2); + } + break; + case TIM_CLOCKSOURCE_ITR3: + { + /* Check whether or not the timer instance supports external clock mode 1 */ + assert_param(IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(htim->Instance)); + + TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_ITR3); + } + break; + + default: + break; + } + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Selects the signal connected to the TI1 input: direct from CH1_input + * or a XOR combination between CH1_input, CH2_input & CH3_input + * @param htim: TIM handle. + * @param TI1_Selection: Indicate whether or not channel 1 is connected to the + * output of a XOR gate. + * This parameter can be one of the following values: + * @arg TIM_TI1SELECTION_CH1: The TIMx_CH1 pin is connected to TI1 input + * @arg TIM_TI1SELECTION_XORCOMBINATION: The TIMx_CH1, CH2 and CH3 + * pins are connected to the TI1 input (XOR combination) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_ConfigTI1Input(TIM_HandleTypeDef *htim, uint32_t TI1_Selection) +{ + uint32_t tmpcr2 = 0; + + /* Check the parameters */ + assert_param(IS_TIM_XOR_INSTANCE(htim->Instance)); + assert_param(IS_TIM_TI1SELECTION(TI1_Selection)); + + /* Get the TIMx CR2 register value */ + tmpcr2 = htim->Instance->CR2; + + /* Reset the TI1 selection */ + tmpcr2 &= ~TIM_CR2_TI1S; + + /* Set the the TI1 selection */ + tmpcr2 |= TI1_Selection; + + /* Write to TIMxCR2 */ + htim->Instance->CR2 = tmpcr2; + + return HAL_OK; +} + +/** + * @brief Configures the TIM in Slave mode + * @param htim : TIM handle. + * @param sSlaveConfig: pointer to a TIM_SlaveConfigTypeDef structure that + * contains the selected trigger (internal trigger input, filtered + * timer input or external trigger input) and the ) and the Slave + * mode (Disable, Reset, Gated, Trigger, External clock mode 1). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchronization(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef * sSlaveConfig) +{ + /* Check the parameters */ + assert_param(IS_TIM_SLAVE_INSTANCE(htim->Instance)); + assert_param(IS_TIM_SLAVE_MODE(sSlaveConfig->SlaveMode)); + assert_param(IS_TIM_TRIGGER_SELECTION(sSlaveConfig->InputTrigger)); + + __HAL_LOCK(htim); + + htim->State = HAL_TIM_STATE_BUSY; + + TIM_SlaveTimer_SetConfig(htim, sSlaveConfig); + + /* Disable Trigger Interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_TRIGGER); + + /* Disable Trigger DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_TRIGGER); + + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Configures the TIM in Slave mode in interrupt mode + * @param htim: TIM handle. + * @param sSlaveConfig: pointer to a TIM_SlaveConfigTypeDef structure that + * contains the selected trigger (internal trigger input, filtered + * timer input or external trigger input) and the ) and the Slave + * mode (Disable, Reset, Gated, Trigger, External clock mode 1). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchronization_IT(TIM_HandleTypeDef *htim, + TIM_SlaveConfigTypeDef * sSlaveConfig) +{ + /* Check the parameters */ + assert_param(IS_TIM_SLAVE_INSTANCE(htim->Instance)); + assert_param(IS_TIM_SLAVE_MODE(sSlaveConfig->SlaveMode)); + assert_param(IS_TIM_TRIGGER_SELECTION(sSlaveConfig->InputTrigger)); + + __HAL_LOCK(htim); + + htim->State = HAL_TIM_STATE_BUSY; + + TIM_SlaveTimer_SetConfig(htim, sSlaveConfig); + + /* Enable Trigger Interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_TRIGGER); + + /* Disable Trigger DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_TRIGGER); + + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Read the captured value from Capture Compare unit + * @param htim: TIM handle. + * @param Channel : TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval Captured value + */ +uint32_t HAL_TIM_ReadCapturedValue(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpreg = 0; + + __HAL_LOCK(htim); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + + /* Return the capture 1 value */ + tmpreg = htim->Instance->CCR1; + + break; + } + case TIM_CHANNEL_2: + { + /* Check the parameters */ + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + + /* Return the capture 2 value */ + tmpreg = htim->Instance->CCR2; + + break; + } + + case TIM_CHANNEL_3: + { + /* Check the parameters */ + assert_param(IS_TIM_CC3_INSTANCE(htim->Instance)); + + /* Return the capture 3 value */ + tmpreg = htim->Instance->CCR3; + + break; + } + + case TIM_CHANNEL_4: + { + /* Check the parameters */ + assert_param(IS_TIM_CC4_INSTANCE(htim->Instance)); + + /* Return the capture 4 value */ + tmpreg = htim->Instance->CCR4; + + break; + } + + default: + break; + } + + __HAL_UNLOCK(htim); + return tmpreg; +} + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group9 TIM Callbacks functions + * @brief TIM Callbacks functions + * +@verbatim + ============================================================================== + ##### TIM Callbacks functions ##### + ============================================================================== + [..] + This section provides TIM callback functions: + (+) Timer Period elapsed callback + (+) Timer Output Compare callback + (+) Timer Input capture callback + (+) Timer Trigger callback + (+) Timer Error callback + +@endverbatim + * @{ + */ + +/** + * @brief Period elapsed callback in non blocking mode + * @param htim : TIM handle + * @retval None + */ +__weak void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function Should not be modified, when the callback is needed, + the __HAL_TIM_PeriodElapsedCallback could be implemented in the user file + */ + +} +/** + * @brief Output Compare callback in non blocking mode + * @param htim : TIM OC handle + * @retval None + */ +__weak void HAL_TIM_OC_DelayElapsedCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function Should not be modified, when the callback is needed, + the __HAL_TIM_OC_DelayElapsedCallback could be implemented in the user file + */ +} +/** + * @brief Input Capture callback in non blocking mode + * @param htim : TIM IC handle + * @retval None + */ +__weak void HAL_TIM_IC_CaptureCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function Should not be modified, when the callback is needed, + the __HAL_TIM_IC_CaptureCallback could be implemented in the user file + */ +} + +/** + * @brief PWM Pulse finished callback in non blocking mode + * @param htim : TIM handle + * @retval None + */ +__weak void HAL_TIM_PWM_PulseFinishedCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function Should not be modified, when the callback is needed, + the __HAL_TIM_PWM_PulseFinishedCallback could be implemented in the user file + */ +} + +/** + * @brief Hall Trigger detection callback in non blocking mode + * @param htim : TIM handle + * @retval None + */ +__weak void HAL_TIM_TriggerCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_TIM_TriggerCallback could be implemented in the user file + */ +} + +/** + * @brief Timer error callback in non blocking mode + * @param htim : TIM handle + * @retval None + */ +__weak void HAL_TIM_ErrorCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_TIM_ErrorCallback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group10 Peripheral State functions + * @brief Peripheral State functions + * +@verbatim + ============================================================================== + ##### Peripheral State functions ##### + ============================================================================== + [..] + This subsection permit to get in run-time the status of the peripheral + and the data flow. + +@endverbatim + * @{ + */ + +/** + * @brief Return the TIM Base state + * @param htim: TIM Base handle + * @retval HAL state + */ +HAL_TIM_StateTypeDef HAL_TIM_Base_GetState(TIM_HandleTypeDef *htim) +{ + return htim->State; +} + +/** + * @brief Return the TIM OC state + * @param htim: TIM Ouput Compare handle + * @retval HAL state + */ +HAL_TIM_StateTypeDef HAL_TIM_OC_GetState(TIM_HandleTypeDef *htim) +{ + return htim->State; +} + +/** + * @brief Return the TIM PWM state + * @param htim: TIM handle + * @retval HAL state + */ +HAL_TIM_StateTypeDef HAL_TIM_PWM_GetState(TIM_HandleTypeDef *htim) +{ + return htim->State; +} + +/** + * @brief Return the TIM Input Capture state + * @param htim: TIM IC handle + * @retval HAL state + */ +HAL_TIM_StateTypeDef HAL_TIM_IC_GetState(TIM_HandleTypeDef *htim) +{ + return htim->State; +} + +/** + * @brief Return the TIM One Pulse Mode state + * @param htim: TIM OPM handle + * @retval HAL state + */ +HAL_TIM_StateTypeDef HAL_TIM_OnePulse_GetState(TIM_HandleTypeDef *htim) +{ + return htim->State; +} + +/** + * @brief Return the TIM Encoder Mode state + * @param htim: TIM Encoder handle + * @retval HAL state + */ +HAL_TIM_StateTypeDef HAL_TIM_Encoder_GetState(TIM_HandleTypeDef *htim) +{ + return htim->State; +} + +/** + * @brief TIM DMA error callback + * @param hdma : pointer to DMA handle. + * @retval None + */ +void TIM_DMAError(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef* htim = ( TIM_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; + + htim->State= HAL_TIM_STATE_READY; + + HAL_TIM_ErrorCallback(htim); +} + +/** + * @brief TIM DMA Delay Pulse complete callback. + * @param hdma : pointer to DMA handle. + * @retval None + */ +void TIM_DMADelayPulseCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef* htim = ( TIM_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; + + htim->State= HAL_TIM_STATE_READY; + + if (hdma == htim->hdma[TIM_DMA_ID_CC1]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; + } + + HAL_TIM_PWM_PulseFinishedCallback(htim); + + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @brief TIM DMA Capture complete callback. + * @param hdma : pointer to DMA handle. + * @retval None + */ +void TIM_DMACaptureCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef* htim = ( TIM_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; + + htim->State= HAL_TIM_STATE_READY; + + if (hdma == htim->hdma[TIM_DMA_ID_CC1]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; + } + + HAL_TIM_IC_CaptureCallback(htim); + + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @} + */ + +/** + * @} + */ + + +/** @addtogroup TIM_Private_Functions + * @{ + */ + +/** + * @brief TIM DMA Period Elapse complete callback. + * @param hdma : pointer to DMA handle. + * @retval None + */ +static void TIM_DMAPeriodElapsedCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef* htim = ( TIM_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; + + htim->State= HAL_TIM_STATE_READY; + + HAL_TIM_PeriodElapsedCallback(htim); +} + +/** + * @brief TIM DMA Trigger callback. + * @param hdma : pointer to DMA handle. + * @retval None + */ +static void TIM_DMATriggerCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef* htim = ( TIM_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; + + htim->State= HAL_TIM_STATE_READY; + + HAL_TIM_TriggerCallback(htim); +} + +/** + * @brief Time Base configuration + * @param TIMx: TIM periheral + * @param Structure: TIM Base configuration structure + * @retval None + */ +static void TIM_Base_SetConfig(TIM_TypeDef *TIMx, TIM_Base_InitTypeDef *Structure) +{ + uint32_t tmpcr1 = 0; + tmpcr1 = TIMx->CR1; + + /* Set TIM Time Base Unit parameters ---------------------------------------*/ + if (IS_TIM_COUNTER_MODE_SELECT_INSTANCE(TIMx)) + { + /* Select the Counter Mode */ + tmpcr1 &= ~(TIM_CR1_DIR | TIM_CR1_CMS); + tmpcr1 |= Structure->CounterMode; + } + + if(IS_TIM_CLOCK_DIVISION_INSTANCE(TIMx)) + { + /* Set the clock division */ + tmpcr1 &= ~TIM_CR1_CKD; + tmpcr1 |= (uint32_t)Structure->ClockDivision; + } + + TIMx->CR1 = tmpcr1; + + /* Set the Autoreload value */ + TIMx->ARR = (uint32_t)Structure->Period ; + + /* Set the Prescaler value */ + TIMx->PSC = (uint32_t)Structure->Prescaler; + + /* Generate an update event to reload the Prescaler */ + TIMx->EGR = TIM_EGR_UG; +} + +/** + * @brief Time Ouput Compare 1 configuration + * @param TIMx to select the TIM peripheral + * @param OC_Config: The ouput configuration structure + * @retval None + */ +static void TIM_OC1_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config) +{ + uint32_t tmpccmrx = 0; + uint32_t tmpccer = 0; + uint32_t tmpcr2 = 0; + + /* Disable the Channel 1: Reset the CC1E Bit */ + TIMx->CCER &= ~TIM_CCER_CC1E; + + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + /* Get the TIMx CR2 register value */ + tmpcr2 = TIMx->CR2; + + /* Get the TIMx CCMR1 register value */ + tmpccmrx = TIMx->CCMR1; + + /* Reset the Output Compare Mode Bits */ + tmpccmrx &= ~TIM_CCMR1_OC1M; + tmpccmrx &= ~TIM_CCMR1_CC1S; + /* Select the Output Compare Mode */ + tmpccmrx |= OC_Config->OCMode; + + /* Reset the Output Polarity level */ + tmpccer &= ~TIM_CCER_CC1P; + /* Set the Output Compare Polarity */ + tmpccer |= OC_Config->OCPolarity; + + /* Write to TIMx CR2 */ + TIMx->CR2 = tmpcr2; + + /* Write to TIMx CCMR1 */ + TIMx->CCMR1 = tmpccmrx; + + /* Set the Capture Compare Register value */ + TIMx->CCR1 = OC_Config->Pulse; + + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Time Ouput Compare 2 configuration + * @param TIMx to select the TIM peripheral + * @param OC_Config: The ouput configuration structure + * @retval None + */ +static void TIM_OC2_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config) +{ + uint32_t tmpccmrx = 0; + uint32_t tmpccer = 0; + uint32_t tmpcr2 = 0; + + /* Disable the Channel 2: Reset the CC2E Bit */ + TIMx->CCER &= ~TIM_CCER_CC2E; + + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + /* Get the TIMx CR2 register value */ + tmpcr2 = TIMx->CR2; + + /* Get the TIMx CCMR1 register value */ + tmpccmrx = TIMx->CCMR1; + + /* Reset the Output Compare mode and Capture/Compare selection Bits */ + tmpccmrx &= ~TIM_CCMR1_OC2M; + tmpccmrx &= ~TIM_CCMR1_CC2S; + + /* Select the Output Compare Mode */ + tmpccmrx |= (OC_Config->OCMode << 8); + + /* Reset the Output Polarity level */ + tmpccer &= ~TIM_CCER_CC2P; + /* Set the Output Compare Polarity */ + tmpccer |= (OC_Config->OCPolarity << 4); + + /* Write to TIMx CR2 */ + TIMx->CR2 = tmpcr2; + + /* Write to TIMx CCMR1 */ + TIMx->CCMR1 = tmpccmrx; + + /* Set the Capture Compare Register value */ + TIMx->CCR2 = OC_Config->Pulse; + + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Time Ouput Compare 3 configuration + * @param TIMx to select the TIM peripheral + * @param OC_Config: The ouput configuration structure + * @retval None + */ +static void TIM_OC3_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config) +{ + uint32_t tmpccmrx = 0; + uint32_t tmpccer = 0; + uint32_t tmpcr2 = 0; + + /* Disable the Channel 3: Reset the CC2E Bit */ + TIMx->CCER &= ~TIM_CCER_CC3E; + + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + /* Get the TIMx CR2 register value */ + tmpcr2 = TIMx->CR2; + + /* Get the TIMx CCMR2 register value */ + tmpccmrx = TIMx->CCMR2; + + /* Reset the Output Compare mode and Capture/Compare selection Bits */ + tmpccmrx &= ~TIM_CCMR2_OC3M; + tmpccmrx &= ~TIM_CCMR2_CC3S; + /* Select the Output Compare Mode */ + tmpccmrx |= OC_Config->OCMode; + + /* Reset the Output Polarity level */ + tmpccer &= ~TIM_CCER_CC3P; + /* Set the Output Compare Polarity */ + tmpccer |= (OC_Config->OCPolarity << 8); + + /* Write to TIMx CR2 */ + TIMx->CR2 = tmpcr2; + + /* Write to TIMx CCMR2 */ + TIMx->CCMR2 = tmpccmrx; + + /* Set the Capture Compare Register value */ + TIMx->CCR3 = OC_Config->Pulse; + + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Time Ouput Compare 4 configuration + * @param TIMx to select the TIM peripheral + * @param OC_Config: The ouput configuration structure + * @retval None + */ +static void TIM_OC4_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config) +{ + uint32_t tmpccmrx = 0; + uint32_t tmpccer = 0; + uint32_t tmpcr2 = 0; + + /* Disable the Channel 4: Reset the CC4E Bit */ + TIMx->CCER &= ~TIM_CCER_CC4E; + + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + /* Get the TIMx CR2 register value */ + tmpcr2 = TIMx->CR2; + + /* Get the TIMx CCMR2 register value */ + tmpccmrx = TIMx->CCMR2; + + /* Reset the Output Compare mode and Capture/Compare selection Bits */ + tmpccmrx &= ~TIM_CCMR2_OC4M; + tmpccmrx &= ~TIM_CCMR2_CC4S; + + /* Select the Output Compare Mode */ + tmpccmrx |= (OC_Config->OCMode << 8); + + /* Reset the Output Polarity level */ + tmpccer &= ~TIM_CCER_CC4P; + /* Set the Output Compare Polarity */ + tmpccer |= (OC_Config->OCPolarity << 12); + + /* Write to TIMx CR2 */ + TIMx->CR2 = tmpcr2; + + /* Write to TIMx CCMR2 */ + TIMx->CCMR2 = tmpccmrx; + + /* Set the Capture Compare Register value */ + TIMx->CCR4 = OC_Config->Pulse; + + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + + +/** + * @brief Time Slave configuration + * @param htim: pointer to a TIM_HandleTypeDef structure that contains + * the configuration information for TIM module. + * @param sSlaveConfig: The slave configuration structure + * @retval None + */ +static void TIM_SlaveTimer_SetConfig(TIM_HandleTypeDef *htim, + TIM_SlaveConfigTypeDef * sSlaveConfig) +{ + uint32_t tmpsmcr = 0; + uint32_t tmpccmr1 = 0; + uint32_t tmpccer = 0; + + /* Get the TIMx SMCR register value */ + tmpsmcr = htim->Instance->SMCR; + + /* Reset the Trigger Selection Bits */ + tmpsmcr &= ~TIM_SMCR_TS; + /* Set the Input Trigger source */ + tmpsmcr |= sSlaveConfig->InputTrigger; + + /* Reset the slave mode Bits */ + tmpsmcr &= ~TIM_SMCR_SMS; + /* Set the slave mode */ + tmpsmcr |= sSlaveConfig->SlaveMode; + + /* Write to TIMx SMCR */ + htim->Instance->SMCR = tmpsmcr; + + /* Configure the trigger prescaler, filter, and polarity */ + switch (sSlaveConfig->InputTrigger) + { + case TIM_TS_ETRF: + { + /* Check the parameters */ + assert_param(IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(htim->Instance)); + assert_param(IS_TIM_TRIGGERPRESCALER(sSlaveConfig->TriggerPrescaler)); + assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity)); + assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter)); + /* Configure the ETR Trigger source */ + TIM_ETR_SetConfig(htim->Instance, + sSlaveConfig->TriggerPrescaler, + sSlaveConfig->TriggerPolarity, + sSlaveConfig->TriggerFilter); + } + break; + + case TIM_TS_TI1F_ED: + { + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter)); + + /* Disable the Channel 1: Reset the CC1E Bit */ + tmpccer = htim->Instance->CCER; + htim->Instance->CCER &= ~TIM_CCER_CC1E; + tmpccmr1 = htim->Instance->CCMR1; + + /* Set the filter */ + tmpccmr1 &= ~TIM_CCMR1_IC1F; + tmpccmr1 |= ((sSlaveConfig->TriggerFilter) << 4); + + /* Write to TIMx CCMR1 and CCER registers */ + htim->Instance->CCMR1 = tmpccmr1; + htim->Instance->CCER = tmpccer; + + } + break; + + case TIM_TS_TI1FP1: + { + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity)); + assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter)); + + /* Configure TI1 Filter and Polarity */ + TIM_TI1_ConfigInputStage(htim->Instance, + sSlaveConfig->TriggerPolarity, + sSlaveConfig->TriggerFilter); + } + break; + + case TIM_TS_TI2FP2: + { + /* Check the parameters */ + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity)); + assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter)); + + /* Configure TI2 Filter and Polarity */ + TIM_TI2_ConfigInputStage(htim->Instance, + sSlaveConfig->TriggerPolarity, + sSlaveConfig->TriggerFilter); + } + break; + + case TIM_TS_ITR0: + { + /* Check the parameter */ + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + } + break; + + case TIM_TS_ITR1: + { + /* Check the parameter */ + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + } + break; + + case TIM_TS_ITR2: + { + /* Check the parameter */ + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + } + break; + + case TIM_TS_ITR3: + { + /* Check the parameter */ + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + } + break; + + default: + break; + } +} + +/** + * @brief Configure the TI1 as Input. + * @param TIMx to select the TIM peripheral. + * @param TIM_ICPolarity : The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPOLARITY_RISING + * @arg TIM_ICPOLARITY_FALLING + * @arg TIM_ICPOLARITY_BOTHEDGE + * @param TIM_ICSelection: specifies the input to be used. + * This parameter can be one of the following values: + * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 1 is selected to be connected to IC1. + * @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 1 is selected to be connected to IC2. + * @arg TIM_ICSELECTION_TRC: TIM Input 1 is selected to be connected to TRC. + * @param TIM_ICFilter: Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @retval None + * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI2FP1 + * (on channel2 path) is used as the input signal. Therefore CCMR1 must be + * protected against un-initialized filter and polarity values. + */ +static void TIM_TI1_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, + uint32_t TIM_ICFilter) +{ + uint32_t tmpccmr1 = 0; + uint32_t tmpccer = 0; + + /* Disable the Channel 1: Reset the CC1E Bit */ + TIMx->CCER &= ~TIM_CCER_CC1E; + tmpccmr1 = TIMx->CCMR1; + tmpccer = TIMx->CCER; + + /* Select the Input */ + if(IS_TIM_CC2_INSTANCE(TIMx) != RESET) + { + tmpccmr1 &= ~TIM_CCMR1_CC1S; + tmpccmr1 |= TIM_ICSelection; + } + else + { + tmpccmr1 |= TIM_CCMR1_CC1S_0; + } + + /* Set the filter */ + tmpccmr1 &= ~TIM_CCMR1_IC1F; + tmpccmr1 |= ((TIM_ICFilter << 4) & TIM_CCMR1_IC1F); + + /* Select the Polarity and set the CC1E Bit */ + tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC1NP); + tmpccer |= (TIM_ICPolarity & (TIM_CCER_CC1P | TIM_CCER_CC1NP)); + + /* Write to TIMx CCMR1 and CCER registers */ + TIMx->CCMR1 = tmpccmr1; + TIMx->CCER = tmpccer; +} + +/** + * @brief Configure the Polarity and Filter for TI1. + * @param TIMx to select the TIM peripheral. + * @param TIM_ICPolarity : The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPOLARITY_RISING + * @arg TIM_ICPOLARITY_FALLING + * @arg TIM_ICPOLARITY_BOTHEDGE + * @param TIM_ICFilter: Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @retval None + */ +static void TIM_TI1_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter) +{ + uint32_t tmpccmr1 = 0; + uint32_t tmpccer = 0; + + /* Disable the Channel 1: Reset the CC1E Bit */ + tmpccer = TIMx->CCER; + TIMx->CCER &= ~TIM_CCER_CC1E; + tmpccmr1 = TIMx->CCMR1; + + /* Set the filter */ + tmpccmr1 &= ~TIM_CCMR1_IC1F; + tmpccmr1 |= (TIM_ICFilter << 4); + + /* Select the Polarity and set the CC1E Bit */ + tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC1NP); + tmpccer |= TIM_ICPolarity; + + /* Write to TIMx CCMR1 and CCER registers */ + TIMx->CCMR1 = tmpccmr1; + TIMx->CCER = tmpccer; +} + +/** + * @brief Configure the TI2 as Input. + * @param TIMx to select the TIM peripheral + * @param TIM_ICPolarity : The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPOLARITY_RISING + * @arg TIM_ICPOLARITY_FALLING + * @arg TIM_ICPOLARITY_BOTHEDGE + * @param TIM_ICSelection: specifies the input to be used. + * This parameter can be one of the following values: + * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 2 is selected to be connected to IC2. + * @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 2 is selected to be connected to IC1. + * @arg TIM_ICSELECTION_TRC: TIM Input 2 is selected to be connected to TRC. + * @param TIM_ICFilter: Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @retval None + * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI1FP2 + * (on channel1 path) is used as the input signal. Therefore CCMR1 must be + * protected against un-initialized filter and polarity values. + */ +static void TIM_TI2_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, + uint32_t TIM_ICFilter) +{ + uint32_t tmpccmr1 = 0; + uint32_t tmpccer = 0; + + /* Disable the Channel 2: Reset the CC2E Bit */ + TIMx->CCER &= ~TIM_CCER_CC2E; + tmpccmr1 = TIMx->CCMR1; + tmpccer = TIMx->CCER; + + /* Select the Input */ + tmpccmr1 &= ~TIM_CCMR1_CC2S; + tmpccmr1 |= (TIM_ICSelection << 8); + + /* Set the filter */ + tmpccmr1 &= ~TIM_CCMR1_IC2F; + tmpccmr1 |= ((TIM_ICFilter << 12) & TIM_CCMR1_IC2F); + + /* Select the Polarity and set the CC2E Bit */ + tmpccer &= ~(TIM_CCER_CC2P | TIM_CCER_CC2NP); + tmpccer |= ((TIM_ICPolarity << 4) & (TIM_CCER_CC2P | TIM_CCER_CC2NP)); + + /* Write to TIMx CCMR1 and CCER registers */ + TIMx->CCMR1 = tmpccmr1 ; + TIMx->CCER = tmpccer; +} + +/** + * @brief Configure the Polarity and Filter for TI2. + * @param TIMx to select the TIM peripheral. + * @param TIM_ICPolarity : The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPOLARITY_RISING + * @arg TIM_ICPOLARITY_FALLING + * @arg TIM_ICPOLARITY_BOTHEDGE + * @param TIM_ICFilter: Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @retval None + */ +static void TIM_TI2_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter) +{ + uint32_t tmpccmr1 = 0; + uint32_t tmpccer = 0; + + /* Disable the Channel 2: Reset the CC2E Bit */ + TIMx->CCER &= ~TIM_CCER_CC2E; + tmpccmr1 = TIMx->CCMR1; + tmpccer = TIMx->CCER; + + /* Set the filter */ + tmpccmr1 &= ~TIM_CCMR1_IC2F; + tmpccmr1 |= (TIM_ICFilter << 12); + + /* Select the Polarity and set the CC2E Bit */ + tmpccer &= ~(TIM_CCER_CC2P | TIM_CCER_CC2NP); + tmpccer |= (TIM_ICPolarity << 4); + + /* Write to TIMx CCMR1 and CCER registers */ + TIMx->CCMR1 = tmpccmr1 ; + TIMx->CCER = tmpccer; +} + +/** + * @brief Configure the TI3 as Input. + * @param TIMx to select the TIM peripheral + * @param TIM_ICPolarity : The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPOLARITY_RISING + * @arg TIM_ICPOLARITY_FALLING + * @arg TIM_ICPOLARITY_BOTHEDGE + * @param TIM_ICSelection: specifies the input to be used. + * This parameter can be one of the following values: + * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 3 is selected to be connected to IC3. + * @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 3 is selected to be connected to IC4. + * @arg TIM_ICSELECTION_TRC: TIM Input 3 is selected to be connected to TRC. + * @param TIM_ICFilter: Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @retval None + * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI3FP4 + * (on channel1 path) is used as the input signal. Therefore CCMR2 must be + * protected against un-initialized filter and polarity values. + */ +static void TIM_TI3_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, + uint32_t TIM_ICFilter) +{ + uint32_t tmpccmr2 = 0; + uint32_t tmpccer = 0; + + /* Disable the Channel 3: Reset the CC3E Bit */ + TIMx->CCER &= ~TIM_CCER_CC3E; + tmpccmr2 = TIMx->CCMR2; + tmpccer = TIMx->CCER; + + /* Select the Input */ + tmpccmr2 &= ~TIM_CCMR2_CC3S; + tmpccmr2 |= TIM_ICSelection; + + /* Set the filter */ + tmpccmr2 &= ~TIM_CCMR2_IC3F; + tmpccmr2 |= ((TIM_ICFilter << 4) & TIM_CCMR2_IC3F); + + /* Select the Polarity and set the CC3E Bit */ + tmpccer &= ~(TIM_CCER_CC3P | TIM_CCER_CC3NP); + tmpccer |= ((TIM_ICPolarity << 8) & (TIM_CCER_CC3P | TIM_CCER_CC3NP)); + + /* Write to TIMx CCMR2 and CCER registers */ + TIMx->CCMR2 = tmpccmr2; + TIMx->CCER = tmpccer; +} + +/** + * @brief Configure the TI4 as Input. + * @param TIMx to select the TIM peripheral + * @param TIM_ICPolarity : The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPOLARITY_RISING + * @arg TIM_ICPOLARITY_FALLING + * @arg TIM_ICPOLARITY_BOTHEDGE + * @param TIM_ICSelection: specifies the input to be used. + * This parameter can be one of the following values: + * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 4 is selected to be connected to IC4. + * @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 4 is selected to be connected to IC3. + * @arg TIM_ICSELECTION_TRC: TIM Input 4 is selected to be connected to TRC. + * @param TIM_ICFilter: Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @retval None + * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI4FP3 + * (on channel1 path) is used as the input signal. Therefore CCMR2 must be + * protected against un-initialized filter and polarity values. + */ +static void TIM_TI4_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, + uint32_t TIM_ICFilter) +{ + uint32_t tmpccmr2 = 0; + uint32_t tmpccer = 0; + + /* Disable the Channel 4: Reset the CC4E Bit */ + TIMx->CCER &= ~TIM_CCER_CC4E; + tmpccmr2 = TIMx->CCMR2; + tmpccer = TIMx->CCER; + + /* Select the Input */ + tmpccmr2 &= ~TIM_CCMR2_CC4S; + tmpccmr2 |= (TIM_ICSelection << 8); + + /* Set the filter */ + tmpccmr2 &= ~TIM_CCMR2_IC4F; + tmpccmr2 |= ((TIM_ICFilter << 12) & TIM_CCMR2_IC4F); + + /* Select the Polarity and set the CC4E Bit */ + tmpccer &= ~(TIM_CCER_CC4P | TIM_CCER_CC4NP); + tmpccer |= ((TIM_ICPolarity << 12) & (TIM_CCER_CC4P | TIM_CCER_CC4NP)); + + /* Write to TIMx CCMR2 and CCER registers */ + TIMx->CCMR2 = tmpccmr2; + TIMx->CCER = tmpccer ; +} + +/** + * @brief Selects the Input Trigger source + * @param TIMx to select the TIM peripheral + * @param InputTriggerSource: The Input Trigger source. + * This parameter can be one of the following values: + * @arg TIM_TS_ITR0: Internal Trigger 0 + * @arg TIM_TS_ITR1: Internal Trigger 1 + * @arg TIM_TS_ITR2: Internal Trigger 2 + * @arg TIM_TS_ITR3: Internal Trigger 3 + * @arg TIM_TS_TI1F_ED: TI1 Edge Detector + * @arg TIM_TS_TI1FP1: Filtered Timer Input 1 + * @arg TIM_TS_TI2FP2: Filtered Timer Input 2 + * @arg TIM_TS_ETRF: External Trigger input + * @retval None + */ +static void TIM_ITRx_SetConfig(TIM_TypeDef *TIMx, uint16_t InputTriggerSource) +{ + uint32_t tmpsmcr = 0; + + /* Get the TIMx SMCR register value */ + tmpsmcr = TIMx->SMCR; + /* Reset the TS Bits */ + tmpsmcr &= ~TIM_SMCR_TS; + /* Set the Input Trigger source and the slave mode*/ + tmpsmcr |= InputTriggerSource | TIM_SLAVEMODE_EXTERNAL1; + /* Write to TIMx SMCR */ + TIMx->SMCR = tmpsmcr; +} +/** + * @brief Configures the TIMx External Trigger (ETR). + * @param TIMx to select the TIM peripheral + * @param TIM_ExtTRGPrescaler: The external Trigger Prescaler. + * This parameter can be one of the following values: + * @arg TIM_ETRPRESCALER_DIV1: ETRP Prescaler OFF. + * @arg TIM_ETRPRESCALER_DIV2: ETRP frequency divided by 2. + * @arg TIM_ETRPRESCALER_DIV4: ETRP frequency divided by 4. + * @arg TIM_ETRPRESCALER_DIV8: ETRP frequency divided by 8. + * @param TIM_ExtTRGPolarity: The external Trigger Polarity. + * This parameter can be one of the following values: + * @arg TIM_ETRPOLARITY_INVERTED: active low or falling edge active. + * @arg TIM_ETRPOLARITY_NONINVERTED: active high or rising edge active. + * @param ExtTRGFilter: External Trigger Filter. + * This parameter must be a value between 0x00 and 0x0F + * @retval None + */ +static void TIM_ETR_SetConfig(TIM_TypeDef* TIMx, uint32_t TIM_ExtTRGPrescaler, + uint32_t TIM_ExtTRGPolarity, uint32_t ExtTRGFilter) +{ + uint32_t tmpsmcr = 0; + + tmpsmcr = TIMx->SMCR; + + /* Reset the ETR Bits */ + tmpsmcr &= (uint32_t)(~(TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP)); + + /* Set the Prescaler, the Filter value and the Polarity */ + tmpsmcr |= (uint32_t)(TIM_ExtTRGPrescaler | (TIM_ExtTRGPolarity | (ExtTRGFilter << 8))); + + /* Write to TIMx SMCR */ + TIMx->SMCR = tmpsmcr; +} + +/** + * @brief Enables or disables the TIM Capture Compare Channel x. + * @param TIMx to select the TIM peripheral + * @param Channel: specifies the TIM Channel + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 + * @arg TIM_CHANNEL_2: TIM Channel 2 + * @arg TIM_CHANNEL_3: TIM Channel 3 + * @arg TIM_CHANNEL_4: TIM Channel 4 + * @param ChannelState: specifies the TIM Channel CCxE bit new state. + * This parameter can be: TIM_CCx_ENABLE or TIM_CCx_Disable. + * @retval None + */ +static void TIM_CCxChannelCmd(TIM_TypeDef* TIMx, uint32_t Channel, uint32_t ChannelState) +{ + uint32_t tmp = 0; + + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(TIMx)); + assert_param(IS_TIM_CHANNELS(Channel)); + + tmp = TIM_CCER_CC1E << Channel; + + /* Reset the CCxE Bit */ + TIMx->CCER &= ~tmp; + + /* Set or reset the CCxE Bit */ + TIMx->CCER |= (uint32_t)(ChannelState << Channel); +} + +/** + * @} + */ + +#endif /* HAL_TIM_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_tim_ex.c b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_tim_ex.c new file mode 100755 index 0000000..e7ec6f1 --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_tim_ex.c @@ -0,0 +1,219 @@ +/** + ****************************************************************************** + * @file stm32l1xx_hal_tim_ex.c + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief TIM HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Timer extension peripheral: + * + Time Master and Slave synchronization configuration + * + Timer remapping capabilities configuration + @verbatim + ============================================================================== + ##### TIMER Extended features ##### + ============================================================================== + [..] + The Timer Extension features include: + (#) Synchronization circuit to control the timer with external signals and to + interconnect several timers together. + (#) Timer remapping capabilities configuration + + @endverbatim + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** +*/ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_hal.h" + +/** @addtogroup STM32L1xx_HAL_Driver + * @{ + */ + +/** @defgroup TIMEx TIMEx + * @brief TIM Extended HAL module driver + * @{ + */ + +#ifdef HAL_TIM_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/* Exported functions ---------------------------------------------------------*/ + +/** @defgroup TIMEx_Exported_Functions TIMEx Exported Functions + * @{ + */ + +/** @defgroup TIMEx_Exported_Functions_Group1 Peripheral Control functions + * @brief Peripheral Control functions + * +@verbatim + ============================================================================== + ##### Peripheral Control functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+)Configure Master synchronization. + (+) Configure timer remapping capabilities. + +@endverbatim + * @{ + */ + +/** + * @brief Configures the TIM in master mode. + * @param htim: TIM handle. + * @param sMasterConfig: pointer to a TIM_MasterConfigTypeDef structure that + * contains the selected trigger output (TRGO) and the Master/Slave + * mode. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim, TIM_MasterConfigTypeDef * sMasterConfig) +{ + /* Check the parameters */ + assert_param(IS_TIM_MASTER_INSTANCE(htim->Instance)); + assert_param(IS_TIM_TRGO_SOURCE(sMasterConfig->MasterOutputTrigger)); + assert_param(IS_TIM_MSM_STATE(sMasterConfig->MasterSlaveMode)); + + __HAL_LOCK(htim); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Reset the MMS Bits */ + htim->Instance->CR2 &= ~TIM_CR2_MMS; + /* Select the TRGO source */ + htim->Instance->CR2 |= sMasterConfig->MasterOutputTrigger; + + /* Reset the MSM Bit */ + htim->Instance->SMCR &= ~TIM_SMCR_MSM; + /* Set or Reset the MSM Bit */ + htim->Instance->SMCR |= sMasterConfig->MasterSlaveMode; + + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Configures the TIM2/TIM3/TIM9/TIM10/TIM11 Remapping input capabilities. + * @param htim: TIM handle. + * @param Remap: specifies the TIM remapping source. + * This parameter is a combination of the following values depending on TIM instance. + * @retval HAL status + * + * @note For TIM2, the parameter can have the following values: + * @arg TIM_TIM2_ITR1_TIM10_OC: TIM2 ITR1 input is connected to TIM10 OC + * @arg TIM_TIM2_ITR1_TIM5_TGO: TIM2 ITR1 input is connected to TIM5 TGO + * + * @note For TIM3, the parameter can have the following values: + * @arg TIM_TIM3_ITR2_TIM11_OC: TIM3 ITR2 input is connected to TIM11 OC + * @arg TIM_TIM3_ITR2_TIM5_TGO: TIM3 ITR2 input is connected to TIM5 TGO + * + * @note For TIM9, the parameter is a combination of 2 fields (field1 | field2): + * @note For TIM9, the field1 can have the following values: + * @arg TIM_TIM9_ITR1_TIM3_TGO: TIM9 ITR1 input is connected to TIM3 TGO + * @arg TIM_TIM9_ITR1_TS: TIM9 ITR1 input is connected to touch sensing I/O + * @note For TIM9, the field2 can have the following values: + * @arg TIM_TIM9_GPIO: TIM9 Channel1 is connected to GPIO + * @arg TIM_TIM9_LSE: TIM9 Channel1 is connected to LSE internal clock + * @arg TIM_TIM9_GPIO1: TIM9 Channel1 is connected to GPIO + * @arg TIM_TIM9_GPIO2: TIM9 Channel1 is connected to GPIO + * + * @note For TIM10, the parameter is a combination of 3 fields (field1 | field2 | field3): + * @note For TIM10, the field1 can have the following values: + * @arg TIM_TIM10_TI1RMP: TIM10 Channel 1 depends on TI1_RMP + * @arg TIM_TIM10_RI: TIM10 Channel 1 is connected to RI + * @note For TIM10, the field2 can have the following values: + * @arg TIM_TIM10_ETR_LSE: TIM10 ETR input is connected to LSE clock + * @arg TIM_TIM10_ETR_TIM9_TGO: TIM10 ETR input is connected to TIM9 TGO + * @note For TIM10, the field3 can have the following values: + * @arg TIM_TIM10_GPIO: TIM10 Channel1 is connected to GPIO + * @arg TIM_TIM10_LSI: TIM10 Channel1 is connected to LSI internal clock + * @arg TIM_TIM10_LSE: TIM10 Channel1 is connected to LSE internal clock + * @arg TIM_TIM10_RTC: TIM10 Channel1 is connected to RTC wakeup interrupt + * + * @note For TIM11, the parameter is a combination of 3 fields (field1 | field2 | field3): + * @note For TIM11, the field1 can have the following values: + * @arg TIM_TIM11_TI1RMP: TIM11 Channel 1 depends on TI1_RMP + * @arg TIM_TIM11_RI: TIM11 Channel 1 is connected to RI + * @note For TIM11, the field2 can have the following values: + * @arg TIM_TIM11_ETR_LSE: TIM11 ETR input is connected to LSE clock + * @arg TIM_TIM11_ETR_TIM9_TGO: TIM11 ETR input is connected to TIM9 TGO + * @note For TIM11, the field3 can have the following values: + * @arg TIM_TIM11_GPIO: TIM11 Channel1 is connected to GPIO + * @arg TIM_TIM11_MSI: TIM11 Channel1 is connected to MSI internal clock + * @arg TIM_TIM11_HSE_RTC: TIM11 Channel1 is connected to HSE_RTC clock + * @arg TIM_TIM11_GPIO1: TIM11 Channel1 is connected to GPIO + * + */ +HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap) +{ + __HAL_LOCK(htim); + + /* Check parameters */ + assert_param(IS_TIM_REMAP_INSTANCE(htim->Instance)); + assert_param(IS_TIM_REMAP(htim->Instance,Remap)); + + /* Set the Timer remapping configuration */ + htim->Instance->OR = Remap; + + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @} + */ + +#endif /* HAL_TIM_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_uart.c b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_uart.c new file mode 100755 index 0000000..a56f358 --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_uart.c @@ -0,0 +1,1944 @@ +/** + ****************************************************************************** + * @file stm32l1xx_hal_uart.c + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief UART HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Universal Asynchronous Receiver Transmitter (UART) peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral Control functions + * + Peripheral State and Errors functions + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The UART HAL driver can be used as follows: + + (#) Declare a UART_HandleTypeDef handle structure. + + (#) Initialize the UART low level resources by implementing the HAL_UART_MspInit() API: + (##) Enable the USARTx interface clock. + (##) UART pins configuration: + (+++) Enable the clock for the UART GPIOs. + (+++) Configure the UART pins as alternate function pull-up. + (##) NVIC configuration if you need to use interrupt process (HAL_UART_Transmit_IT() + and HAL_UART_Receive_IT() APIs): + (+++) Configure the USARTx interrupt priority. + (+++) Enable the NVIC USART IRQ handle. + (##) DMA Configuration if you need to use DMA process (HAL_UART_Transmit_DMA() + and HAL_UART_Receive_DMA() APIs): + (+++) Declare a DMA handle structure for the Tx/Rx channel. + (+++) Enable the DMAx interface clock. + (+++) Configure the declared DMA handle structure with the required + Tx/Rx parameters. + (+++) Configure the DMA Tx/Rx channel. + (+++) Associate the initialized DMA handle to the UART DMA Tx/Rx handle. + (+++) Configure the priority and enable the NVIC for the transfer complete + interrupt on the DMA Tx/Rx channel. + (+++) Configure the USARTx interrupt priority and enable the NVIC USART IRQ handle + (used for last byte sending completion detection in DMA non circular mode) + + (#) Program the Baud Rate, Word Length, Stop Bit, Parity, Hardware + flow control and Mode(Receiver/Transmitter) in the huart Init structure. + + (#) For the UART asynchronous mode, initialize the UART registers by calling + the HAL_UART_Init() API. + + (#) For the UART Half duplex mode, initialize the UART registers by calling + the HAL_HalfDuplex_Init() API. + + (#) For the LIN mode, initialize the UART registers by calling the HAL_LIN_Init() API. + + (#) For the Multi-Processor mode, initialize the UART registers by calling + the HAL_MultiProcessor_Init() API. + + [..] + (@) The specific UART interrupts (Transmission complete interrupt, + RXNE interrupt and Error Interrupts) will be managed using the macros + __HAL_UART_ENABLE_IT() and __HAL_UART_DISABLE_IT() inside the transmit + and receive process. + + [..] + (@) These APIs (HAL_UART_Init() and HAL_HalfDuplex_Init()) configure also the + low level Hardware GPIO, CLOCK, CORTEX...etc) by calling the customed + HAL_UART_MspInit() API. + + [..] + Three operation modes are available within this driver : + + *** Polling mode IO operation *** + ================================= + [..] + (+) Send an amount of data in blocking mode using HAL_UART_Transmit() + (+) Receive an amount of data in blocking mode using HAL_UART_Receive() + + *** Interrupt mode IO operation *** + =================================== + [..] + (+) Send an amount of data in non blocking mode using HAL_UART_Transmit_IT() + (+) At transmission end of transfer HAL_UART_TxCpltCallback is executed and user can + add his own code by customization of function pointer HAL_UART_TxCpltCallback + (+) Receive an amount of data in non blocking mode using HAL_UART_Receive_IT() + (+) At reception end of transfer HAL_UART_RxCpltCallback is executed and user can + add his own code by customization of function pointer HAL_UART_RxCpltCallback + (+) In case of transfer Error, HAL_UART_ErrorCallback() function is executed and user can + add his own code by customization of function pointer HAL_UART_ErrorCallback + + *** DMA mode IO operation *** + ============================== + [..] + (+) Send an amount of data in non blocking mode (DMA) using HAL_UART_Transmit_DMA() + (+) At transmission end of half transfer HAL_UART_TxHalfCpltCallback is executed and user can + add his own code by customization of function pointer HAL_UART_TxHalfCpltCallback + (+) At transmission end of transfer HAL_UART_TxCpltCallback is executed and user can + add his own code by customization of function pointer HAL_UART_TxCpltCallback + (+) Receive an amount of data in non blocking mode (DMA) using HAL_UART_Receive_DMA() + (+) At reception end of half transfer HAL_UART_RxHalfCpltCallback is executed and user can + add his own code by customization of function pointer HAL_UART_RxHalfCpltCallback + (+) At reception end of transfer HAL_UART_RxCpltCallback is executed and user can + add his own code by customization of function pointer HAL_UART_RxCpltCallback + (+) In case of transfer Error, HAL_UART_ErrorCallback() function is executed and user can + add his own code by customization of function pointer HAL_UART_ErrorCallback + (+) Pause the DMA Transfer using HAL_UART_DMAPause() + (+) Resume the DMA Transfer using HAL_UART_DMAResume() + (+) Stop the DMA Transfer using HAL_UART_DMAStop() + + *** UART HAL driver macros list *** + ============================================= + [..] + Below the list of most used macros in UART HAL driver. + + (+) __HAL_UART_ENABLE: Enable the UART peripheral + (+) __HAL_UART_DISABLE: Disable the UART peripheral + (+) __HAL_UART_GET_FLAG : Check whether the specified UART flag is set or not + (+) __HAL_UART_CLEAR_FLAG : Clear the specified UART pending flag + (+) __HAL_UART_ENABLE_IT: Enable the specified UART interrupt + (+) __HAL_UART_DISABLE_IT: Disable the specified UART interrupt + (+) __HAL_UART_GET_IT_SOURCE: Check whether the specified UART interrupt has occurred or not + + [..] + (@) You can refer to the UART HAL driver header file for more useful macros + + @endverbatim + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_hal.h" + +/** @addtogroup STM32L1xx_HAL_Driver + * @{ + */ + +/** @defgroup UART UART + * @brief HAL UART module driver + * @{ + */ +#ifdef HAL_UART_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @addtogroup UART_Private_Functions UART Private Functions + * @{ + */ +static void UART_SetConfig (UART_HandleTypeDef *huart); +static HAL_StatusTypeDef UART_Transmit_IT(UART_HandleTypeDef *huart); +static HAL_StatusTypeDef UART_EndTransmit_IT(UART_HandleTypeDef *huart); +static HAL_StatusTypeDef UART_Receive_IT(UART_HandleTypeDef *huart); +static void UART_DMATransmitCplt(DMA_HandleTypeDef *hdma); +static void UART_DMATxHalfCplt(DMA_HandleTypeDef *hdma); +static void UART_DMAReceiveCplt(DMA_HandleTypeDef *hdma); +static void UART_DMARxHalfCplt(DMA_HandleTypeDef *hdma); +static void UART_DMAError(DMA_HandleTypeDef *hdma); +static HAL_StatusTypeDef UART_WaitOnFlagUntilTimeout(UART_HandleTypeDef *huart, uint32_t Flag, FlagStatus Status, uint32_t Timeout); +/** + * @} + */ + +/* Exported functions ---------------------------------------------------------*/ + +/** @defgroup UART_Exported_Functions UART Exported Functions + * @{ + */ + +/** @defgroup UART_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim +=============================================================================== + ##### Initialization and Configuration functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to initialize the USARTx or the UARTy + in asynchronous mode. + (+) For the asynchronous mode only these parameters can be configured: + (++) Baud Rate + (++) Word Length + (++) Stop Bit + (++) Parity + (++) Hardware flow control + (++) Receiver/transmitter modes + (++) Over Sampling Methode + [..] + The HAL_UART_Init(), HAL_HalfDuplex_Init(), HAL_LIN_Init() and HAL_MultiProcessor_Init() APIs + follow respectively the UART asynchronous, UART Half duplex, LIN and Multi-Processor + configuration procedures (details for the procedures are available in reference manual (RM0038)). + +@endverbatim + * @{ + */ + +/* + Additionnal remark: If the parity is enabled, then the MSB bit of the data written + in the data register is transmitted but is changed by the parity bit. + Depending on the frame length defined by the M bit (8-bits or 9-bits), + the possible UART frame formats are as listed in the following table: + +-------------------------------------------------------------+ + | M bit | PCE bit | UART frame | + |---------------------|---------------------------------------| + | 0 | 0 | | SB | 8 bit data | STB | | + |---------|-----------|---------------------------------------| + | 0 | 1 | | SB | 7 bit data | PB | STB | | + |---------|-----------|---------------------------------------| + | 1 | 0 | | SB | 9 bit data | STB | | + |---------|-----------|---------------------------------------| + | 1 | 1 | | SB | 8 bit data | PB | STB | | + +-------------------------------------------------------------+ +*/ + +/** + * @brief Initializes the UART mode according to the specified parameters in + * the UART_InitTypeDef and create the associated handle. + * @param huart: Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Init(UART_HandleTypeDef *huart) +{ + /* Check the UART handle allocation */ + if(huart == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + if(huart->Init.HwFlowCtl != UART_HWCONTROL_NONE) + { + /* The hardware flow control is available only for USART1, USART2, USART3 */ + assert_param(IS_UART_HWFLOW_INSTANCE(huart->Instance)); + assert_param(IS_UART_HARDWARE_FLOW_CONTROL(huart->Init.HwFlowCtl)); + } + else + { + assert_param(IS_UART_INSTANCE(huart->Instance)); + } + assert_param(IS_UART_WORD_LENGTH(huart->Init.WordLength)); + assert_param(IS_UART_OVERSAMPLING(huart->Init.OverSampling)); + + if(huart->State == HAL_UART_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + huart->Lock = HAL_UNLOCKED; + + /* Init the low level hardware */ + HAL_UART_MspInit(huart); + } + + huart->State = HAL_UART_STATE_BUSY; + + /* Disable the peripheral */ + __HAL_UART_DISABLE(huart); + + /* Set the UART Communication parameters */ + UART_SetConfig(huart); + + /* In asynchronous mode, the following bits must be kept cleared: + - LINEN and CLKEN bits in the USART_CR2 register, + - SCEN, HDSEL and IREN bits in the USART_CR3 register.*/ + CLEAR_BIT(huart->Instance->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); + CLEAR_BIT(huart->Instance->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL | USART_CR3_IREN)); + + /* Enable the peripheral */ + __HAL_UART_ENABLE(huart); + + /* Initialize the UART state */ + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->State= HAL_UART_STATE_READY; + + return HAL_OK; +} + +/** + * @brief Initializes the half-duplex mode according to the specified + * parameters in the UART_InitTypeDef and create the associated handle. + * @param huart: Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_HalfDuplex_Init(UART_HandleTypeDef *huart) +{ + /* Check the UART handle allocation */ + if(huart == NULL) + { + return HAL_ERROR; + } + + /* Check UART instance */ + assert_param(IS_UART_HALFDUPLEX_INSTANCE(huart->Instance)); + assert_param(IS_UART_WORD_LENGTH(huart->Init.WordLength)); + assert_param(IS_UART_OVERSAMPLING(huart->Init.OverSampling)); + + if(huart->State == HAL_UART_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + huart->Lock = HAL_UNLOCKED; + + /* Init the low level hardware */ + HAL_UART_MspInit(huart); + } + + huart->State = HAL_UART_STATE_BUSY; + + /* Disable the peripheral */ + __HAL_UART_DISABLE(huart); + + /* Set the UART Communication parameters */ + UART_SetConfig(huart); + + /* In half-duplex mode, the following bits must be kept cleared: + - LINEN and CLKEN bits in the USART_CR2 register, + - SCEN and IREN bits in the USART_CR3 register.*/ + CLEAR_BIT(huart->Instance->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); + CLEAR_BIT(huart->Instance->CR3, (USART_CR3_IREN | USART_CR3_SCEN)); + + /* Enable the Half-Duplex mode by setting the HDSEL bit in the CR3 register */ + SET_BIT(huart->Instance->CR3, USART_CR3_HDSEL); + + /* Enable the peripheral */ + __HAL_UART_ENABLE(huart); + + /* Initialize the UART state*/ + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->State= HAL_UART_STATE_READY; + + return HAL_OK; +} + +/** + * @brief Initializes the LIN mode according to the specified + * parameters in the UART_InitTypeDef and create the associated handle. + * @param huart: Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @param BreakDetectLength: Specifies the LIN break detection length. + * This parameter can be one of the following values: + * @arg UART_LINBREAKDETECTLENGTH_10B: 10-bit break detection + * @arg UART_LINBREAKDETECTLENGTH_11B: 11-bit break detection + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLength) +{ + /* Check the UART handle allocation */ + if(huart == NULL) + { + return HAL_ERROR; + } + + /* Check the LIN UART instance */ + assert_param(IS_UART_LIN_INSTANCE(huart->Instance)); + /* Check the Break detection length parameter */ + assert_param(IS_UART_LIN_BREAK_DETECT_LENGTH(BreakDetectLength)); + assert_param(IS_UART_LIN_WORD_LENGTH(huart->Init.WordLength)); + assert_param(IS_UART_LIN_OVERSAMPLING(huart->Init.OverSampling)); + + if(huart->State == HAL_UART_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + huart->Lock = HAL_UNLOCKED; + + /* Init the low level hardware */ + HAL_UART_MspInit(huart); + } + + huart->State = HAL_UART_STATE_BUSY; + + /* Disable the peripheral */ + __HAL_UART_DISABLE(huart); + + /* Set the UART Communication parameters */ + UART_SetConfig(huart); + + /* In LIN mode, the following bits must be kept cleared: + - CLKEN bits in the USART_CR2 register, + - SCEN and IREN bits in the USART_CR3 register.*/ + CLEAR_BIT(huart->Instance->CR2, USART_CR2_CLKEN); + CLEAR_BIT(huart->Instance->CR3, (USART_CR3_HDSEL | USART_CR3_IREN | USART_CR3_SCEN)); + + /* Enable the LIN mode by setting the LINEN bit in the CR2 register */ + SET_BIT(huart->Instance->CR2, USART_CR2_LINEN); + + /* Set the USART LIN Break detection length. */ + MODIFY_REG(huart->Instance->CR2, USART_CR2_LBDL, BreakDetectLength); + + /* Enable the peripheral */ + __HAL_UART_ENABLE(huart); + + /* Initialize the UART state*/ + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->State= HAL_UART_STATE_READY; + + return HAL_OK; +} + +/** + * @brief Initializes the Multi-Processor mode according to the specified + * parameters in the UART_InitTypeDef and create the associated handle. + * @param huart: Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @param Address: UART node address + * @param WakeUpMethod: specifies the UART wakeup method. + * This parameter can be one of the following values: + * @arg UART_WAKEUPMETHOD_IDLELINE: Wakeup by an idle line detection + * @arg UART_WAKEUPMETHOD_ADDRESSMARK: Wakeup by an address mark + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MultiProcessor_Init(UART_HandleTypeDef *huart, uint8_t Address, uint32_t WakeUpMethod) +{ + /* Check the UART handle allocation */ + if(huart == NULL) + { + return HAL_ERROR; + } + + /* Check UART instance capabilities */ + assert_param(IS_UART_MULTIPROCESSOR_INSTANCE(huart->Instance)); + + /* Check the Address & wake up method parameters */ + assert_param(IS_UART_WAKEUPMETHOD(WakeUpMethod)); + assert_param(IS_UART_ADDRESS(Address)); + assert_param(IS_UART_WORD_LENGTH(huart->Init.WordLength)); + assert_param(IS_UART_OVERSAMPLING(huart->Init.OverSampling)); + + if(huart->State == HAL_UART_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + huart->Lock = HAL_UNLOCKED; + + /* Init the low level hardware */ + HAL_UART_MspInit(huart); + } + + huart->State = HAL_UART_STATE_BUSY; + + /* Disable the peripheral */ + __HAL_UART_DISABLE(huart); + + /* Set the UART Communication parameters */ + UART_SetConfig(huart); + + /* In Multi-Processor mode, the following bits must be kept cleared: + - LINEN and CLKEN bits in the USART_CR2 register, + - SCEN, HDSEL and IREN bits in the USART_CR3 register */ + CLEAR_BIT(huart->Instance->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); + CLEAR_BIT(huart->Instance->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL | USART_CR3_IREN)); + + /* Set the USART address node */ + MODIFY_REG(huart->Instance->CR2, USART_CR2_ADD, Address); + + /* Set the wake up method by setting the WAKE bit in the CR1 register */ + MODIFY_REG(huart->Instance->CR1, USART_CR1_WAKE, WakeUpMethod); + + /* Enable the peripheral */ + __HAL_UART_ENABLE(huart); + + /* Initialize the UART state */ + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->State= HAL_UART_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the UART peripheral. + * @param huart: Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_DeInit(UART_HandleTypeDef *huart) +{ + /* Check the UART handle allocation */ + if(huart == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_UART_INSTANCE(huart->Instance)); + + huart->State = HAL_UART_STATE_BUSY; + + /* Disable the Peripheral */ + __HAL_UART_DISABLE(huart); + + huart->Instance->CR1 = 0x0; + huart->Instance->CR2 = 0x0; + huart->Instance->CR3 = 0x0; + + /* DeInit the low level hardware */ + HAL_UART_MspDeInit(huart); + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->State = HAL_UART_STATE_RESET; + + /* Process Unlock */ + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief UART MSP Init. + * @param huart: Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval None + */ + __weak void HAL_UART_MspInit(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_UART_MspInit can be implemented in the user file + */ +} + +/** + * @brief UART MSP DeInit. + * @param huart: Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval None + */ + __weak void HAL_UART_MspDeInit(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_UART_MspDeInit can be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup UART_Exported_Functions_Group2 IO operation functions + * @brief UART Transmit and Receive functions + * +@verbatim + ============================================================================== + ##### IO operation functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to manage the UART asynchronous + and Half duplex data transfers. + + (#) There are two modes of transfer: + (++) Blocking mode: The communication is performed in polling mode. + The HAL status of all data processing is returned by the same function + after finishing transfer. + (++) Non blocking mode: The communication is performed using Interrupts + or DMA, these APIs return the HAL status. + The end of the data processing will be indicated through the + dedicated UART IRQ when using Interrupt mode or the DMA IRQ when + using DMA mode. + The HAL_UART_TxCpltCallback(), HAL_UART_RxCpltCallback() user callbacks + will be executed respectively at the end of the transmit or receive process. + The HAL_UART_ErrorCallback() user callback will be executed when + a communication error is detected. + + (#) Blocking mode APIs are: + (++) HAL_UART_Transmit() + (++) HAL_UART_Receive() + + (#) Non Blocking mode APIs with Interrupt are: + (++) HAL_UART_Transmit_IT() + (++) HAL_UART_Receive_IT() + (++) HAL_UART_IRQHandler() + + (#) Non Blocking mode functions with DMA are: + (++) HAL_UART_Transmit_DMA() + (++) HAL_UART_Receive_DMA() + (++) HAL_UART_DMAPause() + (++) HAL_UART_DMAResume() + (++) HAL_UART_DMAStop() + + (#) A set of Transfer Complete Callbacks are provided in non blocking mode: + (++) HAL_UART_TxHalfCpltCallback() + (++) HAL_UART_TxCpltCallback() + (++) HAL_UART_RxHalfCpltCallback() + (++) HAL_UART_RxCpltCallback() + (++) HAL_UART_ErrorCallback() + + [..] + (@) In the Half duplex communication, it is forbidden to run the transmit + and receive process in parallel, the UART state HAL_UART_STATE_BUSY_TX_RX + can't be useful. + +@endverbatim + * @{ + */ + +/** + * @brief Sends an amount of data in blocking mode. + * @param huart: Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @param pData: Pointer to data buffer + * @param Size: Amount of data to be sent + * @param Timeout: Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + uint16_t* tmp; + uint32_t tmp_state = 0; + + tmp_state = huart->State; + if((tmp_state == HAL_UART_STATE_READY) || (tmp_state == HAL_UART_STATE_BUSY_RX)) + { + if((pData == NULL) || (Size == 0)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(huart); + + huart->ErrorCode = HAL_UART_ERROR_NONE; + /* Check if a non-blocking receive process is ongoing or not */ + if(huart->State == HAL_UART_STATE_BUSY_RX) + { + huart->State = HAL_UART_STATE_BUSY_TX_RX; + } + else + { + huart->State = HAL_UART_STATE_BUSY_TX; + } + + huart->TxXferSize = Size; + huart->TxXferCount = Size; + while(huart->TxXferCount > 0) + { + huart->TxXferCount--; + if(huart->Init.WordLength == UART_WORDLENGTH_9B) + { + if(UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_TXE, RESET, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + tmp = (uint16_t*) pData; + huart->Instance->DR = (*tmp & (uint16_t)0x01FF); + if(huart->Init.Parity == UART_PARITY_NONE) + { + pData +=2; + } + else + { + pData +=1; + } + } + else + { + if(UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_TXE, RESET, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + huart->Instance->DR = (*pData++ & (uint8_t)0xFF); + } + } + + if(UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_TC, RESET, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + + /* Check if a non-blocking receive process is ongoing or not */ + if(huart->State == HAL_UART_STATE_BUSY_TX_RX) + { + huart->State = HAL_UART_STATE_BUSY_RX; + } + else + { + huart->State = HAL_UART_STATE_READY; + } + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receives an amount of data in blocking mode. + * @param huart: Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @param pData: Pointer to data buffer + * @param Size: Amount of data to be received + * @param Timeout: Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Receive(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + uint16_t* tmp; + uint32_t tmp_state = 0; + + tmp_state = huart->State; + if((tmp_state == HAL_UART_STATE_READY) || (tmp_state == HAL_UART_STATE_BUSY_TX)) + { + if((pData == NULL ) || (Size == 0)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(huart); + + huart->ErrorCode = HAL_UART_ERROR_NONE; + /* Check if a non-blocking transmit process is ongoing or not */ + if(huart->State == HAL_UART_STATE_BUSY_TX) + { + huart->State = HAL_UART_STATE_BUSY_TX_RX; + } + else + { + huart->State = HAL_UART_STATE_BUSY_RX; + } + + huart->RxXferSize = Size; + huart->RxXferCount = Size; + + /* Check the remain data to be received */ + while(huart->RxXferCount > 0) + { + huart->RxXferCount--; + if(huart->Init.WordLength == UART_WORDLENGTH_9B) + { + if(UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_RXNE, RESET, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + tmp = (uint16_t*) pData ; + if(huart->Init.Parity == UART_PARITY_NONE) + { + *tmp = (uint16_t)(huart->Instance->DR & (uint16_t)0x01FF); + pData +=2; + } + else + { + *tmp = (uint16_t)(huart->Instance->DR & (uint16_t)0x00FF); + pData +=1; + } + + } + else + { + if(UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_RXNE, RESET, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + if(huart->Init.Parity == UART_PARITY_NONE) + { + *pData++ = (uint8_t)(huart->Instance->DR & (uint8_t)0x00FF); + } + else + { + *pData++ = (uint8_t)(huart->Instance->DR & (uint8_t)0x007F); + } + + } + } + + /* Check if a non-blocking transmit process is ongoing or not */ + if(huart->State == HAL_UART_STATE_BUSY_TX_RX) + { + huart->State = HAL_UART_STATE_BUSY_TX; + } + else + { + huart->State = HAL_UART_STATE_READY; + } + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Sends an amount of data in non blocking mode. + * @param huart: Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @param pData: Pointer to data buffer + * @param Size: Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) +{ + uint32_t tmp_state = 0; + + tmp_state = huart->State; + if((tmp_state == HAL_UART_STATE_READY) || (tmp_state == HAL_UART_STATE_BUSY_RX)) + { + if((pData == NULL ) || (Size == 0)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(huart); + + huart->pTxBuffPtr = pData; + huart->TxXferSize = Size; + huart->TxXferCount = Size; + + huart->ErrorCode = HAL_UART_ERROR_NONE; + /* Check if a receive process is ongoing or not */ + if(huart->State == HAL_UART_STATE_BUSY_RX) + { + huart->State = HAL_UART_STATE_BUSY_TX_RX; + } + else + { + huart->State = HAL_UART_STATE_BUSY_TX; + } + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + /* Enable the UART Transmit data register empty Interrupt */ + __HAL_UART_ENABLE_IT(huart, UART_IT_TXE); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receives an amount of data in non blocking mode + * @param huart: Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @param pData: Pointer to data buffer + * @param Size: Amount of data to be received + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) +{ + uint32_t tmp_state = 0; + + tmp_state = huart->State; + if((tmp_state == HAL_UART_STATE_READY) || (tmp_state == HAL_UART_STATE_BUSY_TX)) + { + if((pData == NULL ) || (Size == 0)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(huart); + + huart->pRxBuffPtr = pData; + huart->RxXferSize = Size; + huart->RxXferCount = Size; + + huart->ErrorCode = HAL_UART_ERROR_NONE; + /* Check if a transmit process is ongoing or not */ + if(huart->State == HAL_UART_STATE_BUSY_TX) + { + huart->State = HAL_UART_STATE_BUSY_TX_RX; + } + else + { + huart->State = HAL_UART_STATE_BUSY_RX; + } + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + /* Enable the UART Parity Error Interrupt */ + __HAL_UART_ENABLE_IT(huart, UART_IT_PE); + + /* Enable the UART Error Interrupt: (Frame error, noise error, overrun error) */ + __HAL_UART_ENABLE_IT(huart, UART_IT_ERR); + + /* Enable the UART Data Register not empty Interrupt */ + __HAL_UART_ENABLE_IT(huart, UART_IT_RXNE); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Sends an amount of data in non blocking mode. + * @param huart: Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @param pData: Pointer to data buffer + * @param Size: Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) +{ + uint32_t *tmp; + uint32_t tmp_state = 0; + + tmp_state = huart->State; + if((tmp_state == HAL_UART_STATE_READY) || (tmp_state == HAL_UART_STATE_BUSY_RX)) + { + if((pData == NULL ) || (Size == 0)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(huart); + + huart->pTxBuffPtr = pData; + huart->TxXferSize = Size; + huart->TxXferCount = Size; + + huart->ErrorCode = HAL_UART_ERROR_NONE; + /* Check if a receive process is ongoing or not */ + if(huart->State == HAL_UART_STATE_BUSY_RX) + { + huart->State = HAL_UART_STATE_BUSY_TX_RX; + } + else + { + huart->State = HAL_UART_STATE_BUSY_TX; + } + + /* Set the UART DMA transfer complete callback */ + huart->hdmatx->XferCpltCallback = UART_DMATransmitCplt; + + /* Set the UART DMA Half transfer complete callback */ + huart->hdmatx->XferHalfCpltCallback = UART_DMATxHalfCplt; + + /* Set the DMA error callback */ + huart->hdmatx->XferErrorCallback = UART_DMAError; + + /* Enable the UART transmit DMA channel */ + tmp = (uint32_t*)&pData; + HAL_DMA_Start_IT(huart->hdmatx, *(uint32_t*)tmp, (uint32_t)&huart->Instance->DR, Size); + + /* Clear the TC flag in the SR register by writing 0 to it */ + __HAL_UART_CLEAR_FLAG(huart, UART_FLAG_TC); + + /* Enable the DMA transfer for transmit request by setting the DMAT bit + in the UART CR3 register */ + SET_BIT(huart->Instance->CR3, USART_CR3_DMAT); + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receives an amount of data in non blocking mode. + * @param huart: Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @param pData: Pointer to data buffer + * @param Size: Amount of data to be received + * @note When the UART parity is enabled (PCE = 1), the received data contain + * the parity bit (MSB position) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) +{ + uint32_t *tmp; + uint32_t tmp_state = 0; + + tmp_state = huart->State; + if((tmp_state == HAL_UART_STATE_READY) || (tmp_state == HAL_UART_STATE_BUSY_TX)) + { + if((pData == NULL ) || (Size == 0)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(huart); + + huart->pRxBuffPtr = pData; + huart->RxXferSize = Size; + + huart->ErrorCode = HAL_UART_ERROR_NONE; + /* Check if a transmit process is ongoing or not */ + if(huart->State == HAL_UART_STATE_BUSY_TX) + { + huart->State = HAL_UART_STATE_BUSY_TX_RX; + } + else + { + huart->State = HAL_UART_STATE_BUSY_RX; + } + + /* Set the UART DMA transfer complete callback */ + huart->hdmarx->XferCpltCallback = UART_DMAReceiveCplt; + + /* Set the UART DMA Half transfer complete callback */ + huart->hdmarx->XferHalfCpltCallback = UART_DMARxHalfCplt; + + /* Set the DMA error callback */ + huart->hdmarx->XferErrorCallback = UART_DMAError; + + /* Enable the DMA channel */ + tmp = (uint32_t*)&pData; + HAL_DMA_Start_IT(huart->hdmarx, (uint32_t)&huart->Instance->DR, *(uint32_t*)tmp, Size); + + /* Enable the DMA transfer for the receiver request by setting the DMAR bit + in the UART CR3 register */ + SET_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Pauses the DMA Transfer. + * @param huart: Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_DMAPause(UART_HandleTypeDef *huart) +{ + /* Process Locked */ + __HAL_LOCK(huart); + + if(huart->State == HAL_UART_STATE_BUSY_TX) + { + /* Disable the UART DMA Tx request */ + CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); + } + else if(huart->State == HAL_UART_STATE_BUSY_RX) + { + /* Disable the UART DMA Rx request */ + CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + } + else if (huart->State == HAL_UART_STATE_BUSY_TX_RX) + { + /* Disable the UART DMA Tx & Rx requests */ + CLEAR_BIT(huart->Instance->CR3, (USART_CR3_DMAT | USART_CR3_DMAR)); + } + else + { + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_ERROR; + } + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Resumes the DMA Transfer. + * @param huart: Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_DMAResume(UART_HandleTypeDef *huart) +{ + /* Process Locked */ + __HAL_LOCK(huart); + + if(huart->State == HAL_UART_STATE_BUSY_TX) + { + /* Enable the UART DMA Tx request */ + SET_BIT(huart->Instance->CR3, USART_CR3_DMAT); + } + else if(huart->State == HAL_UART_STATE_BUSY_RX) + { + /* Clear the Overrun flag before resumming the Rx transfer*/ + __HAL_UART_CLEAR_OREFLAG(huart); + /* Enable the UART DMA Rx request */ + SET_BIT(huart->Instance->CR3, USART_CR3_DMAR); + } + else if(huart->State == HAL_UART_STATE_BUSY_TX_RX) + { + /* Clear the Overrun flag before resumming the Rx transfer*/ + __HAL_UART_CLEAR_OREFLAG(huart); + /* Enable the UART DMA Tx & Rx request */ + SET_BIT(huart->Instance->CR3, (USART_CR3_DMAT | USART_CR3_DMAR)); + } + else + { + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_ERROR; + } + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Stops the DMA Transfer. + * @param huart: Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_DMAStop(UART_HandleTypeDef *huart) +{ + /* The Lock is not implemented on this API to allow the user application + to call the HAL UART API under callbacks HAL_UART_TxCpltCallback() / HAL_UART_RxCpltCallback(): + when calling HAL_DMA_Abort() API the DMA TX/RX Transfer complete interrupt is generated + and the correspond call back is executed HAL_UART_TxCpltCallback() / HAL_UART_RxCpltCallback() + */ + + /* Disable the UART Tx/Rx DMA requests */ + CLEAR_BIT(huart->Instance->CR3, (USART_CR3_DMAT | USART_CR3_DMAR)); + + /* Abort the UART DMA tx channel */ + if(huart->hdmatx != NULL) + { + HAL_DMA_Abort(huart->hdmatx); + } + /* Abort the UART DMA rx channel */ + if(huart->hdmarx != NULL) + { + HAL_DMA_Abort(huart->hdmarx); + } + + huart->State = HAL_UART_STATE_READY; + + return HAL_OK; +} + +/** + * @brief This function handles UART interrupt request. + * @param huart: Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval None + */ +void HAL_UART_IRQHandler(UART_HandleTypeDef *huart) +{ + uint32_t tmp_flag = 0, tmp_it_source = 0; + + tmp_flag = __HAL_UART_GET_FLAG(huart, UART_FLAG_PE); + tmp_it_source = __HAL_UART_GET_IT_SOURCE(huart, UART_IT_PE); + /* UART parity error interrupt occurred ------------------------------------*/ + if((tmp_flag != RESET) && (tmp_it_source != RESET)) + { + huart->ErrorCode |= HAL_UART_ERROR_PE; + } + + tmp_flag = __HAL_UART_GET_FLAG(huart, UART_FLAG_FE); + tmp_it_source = __HAL_UART_GET_IT_SOURCE(huart, UART_IT_ERR); + /* UART frame error interrupt occurred -------------------------------------*/ + if((tmp_flag != RESET) && (tmp_it_source != RESET)) + { + huart->ErrorCode |= HAL_UART_ERROR_FE; + } + + tmp_flag = __HAL_UART_GET_FLAG(huart, UART_FLAG_NE); + /* UART noise error interrupt occurred -------------------------------------*/ + if((tmp_flag != RESET) && (tmp_it_source != RESET)) + { + huart->ErrorCode |= HAL_UART_ERROR_NE; + } + + tmp_flag = __HAL_UART_GET_FLAG(huart, UART_FLAG_ORE); + /* UART Over-Run interrupt occurred ----------------------------------------*/ + if((tmp_flag != RESET) && (tmp_it_source != RESET)) + { + huart->ErrorCode |= HAL_UART_ERROR_ORE; + } + + tmp_flag = __HAL_UART_GET_FLAG(huart, UART_FLAG_RXNE); + tmp_it_source = __HAL_UART_GET_IT_SOURCE(huart, UART_IT_RXNE); + /* UART in mode Receiver ---------------------------------------------------*/ + if((tmp_flag != RESET) && (tmp_it_source != RESET)) + { + UART_Receive_IT(huart); + } + + tmp_flag = __HAL_UART_GET_FLAG(huart, UART_FLAG_TXE); + tmp_it_source = __HAL_UART_GET_IT_SOURCE(huart, UART_IT_TXE); + /* UART in mode Transmitter ------------------------------------------------*/ + if((tmp_flag != RESET) && (tmp_it_source != RESET)) + { + UART_Transmit_IT(huart); + } + + tmp_flag = __HAL_UART_GET_FLAG(huart, UART_FLAG_TC); + tmp_it_source = __HAL_UART_GET_IT_SOURCE(huart, UART_IT_TC); + /* UART in mode Transmitter end --------------------------------------------*/ + if((tmp_flag != RESET) && (tmp_it_source != RESET)) + { + UART_EndTransmit_IT(huart); + } + + if(huart->ErrorCode != HAL_UART_ERROR_NONE) + { + /* Clear all the error flag at once */ + __HAL_UART_CLEAR_PEFLAG(huart); + + /* Set the UART state ready to be able to start again the process */ + huart->State = HAL_UART_STATE_READY; + + HAL_UART_ErrorCallback(huart); + } +} + +/** + * @brief Tx Transfer completed callbacks. + * @param huart: Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval None + */ + __weak void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_UART_TxCpltCallback can be implemented in the user file + */ +} + +/** + * @brief Tx Half Transfer completed callbacks. + * @param huart: Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval None + */ + __weak void HAL_UART_TxHalfCpltCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_UART_TxHalfCpltCallback can be implemented in the user file + */ +} + +/** + * @brief Rx Transfer completed callbacks. + * @param huart: Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval None + */ +__weak void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_UART_RxCpltCallback can be implemented in the user file + */ +} + +/** + * @brief Rx Half Transfer completed callbacks. + * @param huart: Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval None + */ +__weak void HAL_UART_RxHalfCpltCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_UART_RxHalfCpltCallback can be implemented in the user file + */ +} + +/** + * @brief UART error callbacks. + * @param huart: Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval None + */ + __weak void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_UART_ErrorCallback can be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup UART_Exported_Functions_Group3 Peripheral Control functions + * @brief UART control functions + * +@verbatim + ============================================================================== + ##### Peripheral Control functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to control the UART: + (+) HAL_LIN_SendBreak() API can be helpful to transmit the break character. + (+) HAL_MultiProcessor_EnterMuteMode() API can be helpful to enter the UART in mute mode. + (+) HAL_MultiProcessor_ExitMuteMode() API can be helpful to exit the UART mute mode by software. + (+) HAL_HalfDuplex_EnableTransmitter() API to enable the UART transmitter and disables the UART receiver in Half Duplex mode + (+) HAL_HalfDuplex_EnableReceiver() API to enable the UART receiver and disables the UART transmitter in Half Duplex mode + +@endverbatim + * @{ + */ + +/** + * @brief Transmits break characters. + * @param huart: Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart) +{ + /* Check the parameters */ + assert_param(IS_UART_LIN_INSTANCE(huart->Instance)); + + /* Process Locked */ + __HAL_LOCK(huart); + + huart->State = HAL_UART_STATE_BUSY; + + /* Send break characters */ + SET_BIT(huart->Instance->CR1, USART_CR1_SBK); + + huart->State = HAL_UART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Enters the UART in mute mode. + * @param huart: Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MultiProcessor_EnterMuteMode(UART_HandleTypeDef *huart) +{ + /* Check the parameters */ + assert_param(IS_UART_INSTANCE(huart->Instance)); + + /* Process Locked */ + __HAL_LOCK(huart); + + huart->State = HAL_UART_STATE_BUSY; + + /* Enable the USART mute mode by setting the RWU bit in the CR1 register */ + SET_BIT(huart->Instance->CR1, USART_CR1_RWU); + + huart->State = HAL_UART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Exits the UART mute mode: wake up software. + * @param huart: Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MultiProcessor_ExitMuteMode(UART_HandleTypeDef *huart) +{ + /* Check the parameters */ + assert_param(IS_UART_INSTANCE(huart->Instance)); + + /* Process Locked */ + __HAL_LOCK(huart); + + huart->State = HAL_UART_STATE_BUSY; + + /* Disable the USART mute mode by clearing the RWU bit in the CR1 register */ + CLEAR_BIT(huart->Instance->CR1, USART_CR1_RWU); + + huart->State = HAL_UART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Enables the UART transmitter and disables the UART receiver. + * @param huart: Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_HalfDuplex_EnableTransmitter(UART_HandleTypeDef *huart) +{ + /* Process Locked */ + __HAL_LOCK(huart); + + huart->State = HAL_UART_STATE_BUSY; + + /*-------------------------- USART CR1 Configuration -----------------------*/ + /* Clear TE and RE bits */ + /* Enable the USART's transmit interface by setting the TE bit in the USART CR1 register */ + MODIFY_REG(huart->Instance->CR1, (uint32_t)(USART_CR1_TE | USART_CR1_RE), USART_CR1_TE); + + huart->State = HAL_UART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Enables the UART receiver and disables the UART transmitter. + * @param huart: Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_HalfDuplex_EnableReceiver(UART_HandleTypeDef *huart) +{ + /* Process Locked */ + __HAL_LOCK(huart); + + huart->State = HAL_UART_STATE_BUSY; + + /*-------------------------- USART CR1 Configuration -----------------------*/ + /* Clear TE and RE bits */ + /* Enable the USART's receive interface by setting the RE bit in the USART CR1 register */ + MODIFY_REG(huart->Instance->CR1, (uint32_t)(USART_CR1_TE | USART_CR1_RE), USART_CR1_RE); + + huart->State = HAL_UART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup UART_Exported_Functions_Group4 Peripheral State and Errors functions + * @brief UART State and Errors functions + * +@verbatim + ============================================================================== + ##### Peripheral State and Errors functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to return the State of + UART communication process, return Peripheral Errors occurred during communication + process + (+) HAL_UART_GetState() API can be helpful to check in run-time the state of the UART peripheral. + (+) HAL_UART_GetError() check in run-time errors that could be occurred during communication. + +@endverbatim + * @{ + */ + +/** + * @brief Returns the UART state. + * @param huart: Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval HAL state + */ +HAL_UART_StateTypeDef HAL_UART_GetState(UART_HandleTypeDef *huart) +{ + return huart->State; +} + +/** +* @brief Return the UART error code +* @param huart: Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART. +* @retval UART Error Code +*/ +uint32_t HAL_UART_GetError(UART_HandleTypeDef *huart) +{ + return huart->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup UART_Private_Functions UART Private Functions + * @brief UART Private functions + * @{ + */ +/** + * @brief DMA UART transmit process complete callback. + * @param hdma: Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void UART_DMATransmitCplt(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef* huart = ( UART_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; + /* DMA Normal mode*/ + if ( HAL_IS_BIT_CLR(hdma->Instance->CCR, DMA_CCR_CIRC) ) + { + huart->TxXferCount = 0; + + /* Disable the DMA transfer for transmit request by setting the DMAT bit + in the UART CR3 register */ + CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); + + /* Enable the UART Transmit Complete Interrupt */ + __HAL_UART_ENABLE_IT(huart, UART_IT_TC); + } + /* DMA Circular mode */ + else + { + HAL_UART_TxCpltCallback(huart); + } +} + +/** + * @brief DMA UART transmit process half complete callback + * @param hdma: Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void UART_DMATxHalfCplt(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef* huart = (UART_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent; + + HAL_UART_TxHalfCpltCallback(huart); +} + +/** + * @brief DMA UART receive process complete callback. + * @param hdma: Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void UART_DMAReceiveCplt(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef* huart = ( UART_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; + /* DMA Normal mode*/ + if ( HAL_IS_BIT_CLR(hdma->Instance->CCR, DMA_CCR_CIRC) ) + { + huart->RxXferCount = 0; + + /* Disable the DMA transfer for the receiver request by setting the DMAR bit + in the UART CR3 register */ + CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* Check if a transmit process is ongoing or not */ + if(huart->State == HAL_UART_STATE_BUSY_TX_RX) + { + huart->State = HAL_UART_STATE_BUSY_TX; + } + else + { + huart->State = HAL_UART_STATE_READY; + } + } + HAL_UART_RxCpltCallback(huart); +} + +/** + * @brief DMA UART receive process half complete callback + * @param hdma: Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void UART_DMARxHalfCplt(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef* huart = (UART_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent; + + HAL_UART_RxHalfCpltCallback(huart); +} + +/** + * @brief DMA UART communication error callback. + * @param hdma: Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void UART_DMAError(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef* huart = ( UART_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; + huart->RxXferCount = 0; + huart->TxXferCount = 0; + huart->State= HAL_UART_STATE_READY; + huart->ErrorCode |= HAL_UART_ERROR_DMA; + HAL_UART_ErrorCallback(huart); +} + +/** + * @brief This function handles UART Communication Timeout. + * @param huart: Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @param Flag: specifies the UART flag to check. + * @param Status: The new Flag status (SET or RESET). + * @param Timeout: Timeout duration + * @retval HAL status + */ +static HAL_StatusTypeDef UART_WaitOnFlagUntilTimeout(UART_HandleTypeDef *huart, uint32_t Flag, FlagStatus Status, uint32_t Timeout) +{ + uint32_t tickstart = 0; + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Wait until flag is set */ + if(Status == RESET) + { + while(__HAL_UART_GET_FLAG(huart, Flag) == RESET) + { + /* Check for the Timeout */ + if(Timeout != HAL_MAX_DELAY) + { + if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout)) + { + /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */ + __HAL_UART_DISABLE_IT(huart, UART_IT_TXE); + __HAL_UART_DISABLE_IT(huart, UART_IT_RXNE); + __HAL_UART_DISABLE_IT(huart, UART_IT_PE); + __HAL_UART_DISABLE_IT(huart, UART_IT_ERR); + + huart->State= HAL_UART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_TIMEOUT; + } + } + } + } + else + { + while(__HAL_UART_GET_FLAG(huart, Flag) != RESET) + { + /* Check for the Timeout */ + if(Timeout != HAL_MAX_DELAY) + { + if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout)) + { + /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */ + __HAL_UART_DISABLE_IT(huart, UART_IT_TXE); + __HAL_UART_DISABLE_IT(huart, UART_IT_RXNE); + __HAL_UART_DISABLE_IT(huart, UART_IT_PE); + __HAL_UART_DISABLE_IT(huart, UART_IT_ERR); + + huart->State= HAL_UART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_TIMEOUT; + } + } + } + } + return HAL_OK; +} + +/** + * @brief Sends an amount of data in non blocking mode. + * @param huart: Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval HAL status + */ +static HAL_StatusTypeDef UART_Transmit_IT(UART_HandleTypeDef *huart) +{ + uint16_t* tmp; + uint32_t tmp_state = 0; + + tmp_state = huart->State; + if((tmp_state == HAL_UART_STATE_BUSY_TX) || (tmp_state == HAL_UART_STATE_BUSY_TX_RX)) + { + if(huart->Init.WordLength == UART_WORDLENGTH_9B) + { + tmp = (uint16_t*) huart->pTxBuffPtr; + huart->Instance->DR = (uint16_t)(*tmp & (uint16_t)0x01FF); + if(huart->Init.Parity == UART_PARITY_NONE) + { + huart->pTxBuffPtr += 2; + } + else + { + huart->pTxBuffPtr += 1; + } + } + else + { + huart->Instance->DR = (uint8_t)(*huart->pTxBuffPtr++ & (uint8_t)0x00FF); + } + + if(--huart->TxXferCount == 0) + { + /* Disable the UART Transmit Complete Interrupt */ + __HAL_UART_DISABLE_IT(huart, UART_IT_TXE); + + /* Enable the UART Transmit Complete Interrupt */ + __HAL_UART_ENABLE_IT(huart, UART_IT_TC); + } + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + + +/** + * @brief Wraps up transmission in non blocking mode. + * @param huart: pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval HAL status + */ +static HAL_StatusTypeDef UART_EndTransmit_IT(UART_HandleTypeDef *huart) +{ + /* Disable the UART Transmit Complete Interrupt */ + __HAL_UART_DISABLE_IT(huart, UART_IT_TC); + + /* Check if a receive process is ongoing or not */ + if(huart->State == HAL_UART_STATE_BUSY_TX_RX) + { + huart->State = HAL_UART_STATE_BUSY_RX; + } + else + { + huart->State = HAL_UART_STATE_READY; + } + + HAL_UART_TxCpltCallback(huart); + + return HAL_OK; +} + +/** + * @brief Receives an amount of data in non blocking mode + * @param huart: Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval HAL status + */ +static HAL_StatusTypeDef UART_Receive_IT(UART_HandleTypeDef *huart) +{ + uint16_t* tmp; + uint32_t tmp_state = 0; + + tmp_state = huart->State; + if((tmp_state == HAL_UART_STATE_BUSY_RX) || (tmp_state == HAL_UART_STATE_BUSY_TX_RX)) + { + if(huart->Init.WordLength == UART_WORDLENGTH_9B) + { + tmp = (uint16_t*) huart->pRxBuffPtr; + if(huart->Init.Parity == UART_PARITY_NONE) + { + *tmp = (uint16_t)(huart->Instance->DR & (uint16_t)0x01FF); + huart->pRxBuffPtr += 2; + } + else + { + *tmp = (uint16_t)(huart->Instance->DR & (uint16_t)0x00FF); + huart->pRxBuffPtr += 1; + } + } + else + { + if(huart->Init.Parity == UART_PARITY_NONE) + { + *huart->pRxBuffPtr++ = (uint8_t)(huart->Instance->DR & (uint8_t)0x00FF); + } + else + { + *huart->pRxBuffPtr++ = (uint8_t)(huart->Instance->DR & (uint8_t)0x007F); + } + } + + if(--huart->RxXferCount == 0) + { + __HAL_UART_DISABLE_IT(huart, UART_IT_RXNE); + + /* Check if a transmit process is ongoing or not */ + if(huart->State == HAL_UART_STATE_BUSY_TX_RX) + { + huart->State = HAL_UART_STATE_BUSY_TX; + } + else + { + /* Disable the UART Parity Error Interrupt */ + __HAL_UART_DISABLE_IT(huart, UART_IT_PE); + + /* Disable the UART Error Interrupt: (Frame error, noise error, overrun error) */ + __HAL_UART_DISABLE_IT(huart, UART_IT_ERR); + + huart->State = HAL_UART_STATE_READY; + } + HAL_UART_RxCpltCallback(huart); + + return HAL_OK; + } + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Configures the UART peripheral. + * @param huart: Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval None + */ +static void UART_SetConfig(UART_HandleTypeDef *huart) +{ + uint32_t tmpreg = 0x00; + + /* Check the parameters */ + assert_param(IS_UART_BAUDRATE(huart->Init.BaudRate)); + assert_param(IS_UART_STOPBITS(huart->Init.StopBits)); + assert_param(IS_UART_PARITY(huart->Init.Parity)); + assert_param(IS_UART_MODE(huart->Init.Mode)); + + /*------- UART-associated USART registers setting : CR2 Configuration ------*/ + /* Configure the UART Stop Bits: Set STOP[13:12] bits according + * to huart->Init.StopBits value */ + MODIFY_REG(huart->Instance->CR2, USART_CR2_STOP, huart->Init.StopBits); + + /*------- UART-associated USART registers setting : CR1 Configuration ------*/ + /* Configure the UART Word Length, Parity and mode: + Set the M bits according to huart->Init.WordLength value + Set PCE and PS bits according to huart->Init.Parity value + Set TE and RE bits according to huart->Init.Mode value + Set OVER8 bit according to huart->Init.OverSampling value */ + tmpreg = (uint32_t)huart->Init.WordLength | huart->Init.Parity | huart->Init.Mode | huart->Init.OverSampling; + MODIFY_REG(huart->Instance->CR1, + (uint32_t)(USART_CR1_M | USART_CR1_PCE | USART_CR1_PS | USART_CR1_TE | USART_CR1_RE | USART_CR1_OVER8), + tmpreg); + + /*------- UART-associated USART registers setting : CR3 Configuration ------*/ + /* Configure the UART HFC: Set CTSE and RTSE bits according to huart->Init.HwFlowCtl value */ + MODIFY_REG(huart->Instance->CR3, (USART_CR3_RTSE | USART_CR3_CTSE), huart->Init.HwFlowCtl); + + /* Check the Over Sampling */ + if(huart->Init.OverSampling == UART_OVERSAMPLING_8) + { + /*------- UART-associated USART registers setting : BRR Configuration ------*/ + if((huart->Instance == USART1)) + { + huart->Instance->BRR = UART_BRR_SAMPLING8(HAL_RCC_GetPCLK2Freq(), huart->Init.BaudRate); + } + else + { + huart->Instance->BRR = UART_BRR_SAMPLING8(HAL_RCC_GetPCLK1Freq(), huart->Init.BaudRate); + } + } + else + { + /*------- UART-associated USART registers setting : BRR Configuration ------*/ + if((huart->Instance == USART1)) + { + huart->Instance->BRR = UART_BRR_SAMPLING16(HAL_RCC_GetPCLK2Freq(), huart->Init.BaudRate); + } + else + { + huart->Instance->BRR = UART_BRR_SAMPLING16(HAL_RCC_GetPCLK1Freq(), huart->Init.BaudRate); + } + } +} +/** + * @} + */ + +#endif /* HAL_UART_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_usart.c b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_usart.c new file mode 100755 index 0000000..7bb0be3 --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_usart.c @@ -0,0 +1,1901 @@ +/** + ****************************************************************************** + * @file stm32l1xx_hal_usart.c + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief USART HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Universal Synchronous Asynchronous Receiver Transmitter (USART) peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral Control functions + * + Peripheral State and Errors functions + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The USART HAL driver can be used as follows: + + (#) Declare a USART_HandleTypeDef handle structure. + (#) Initialize the USART low level resources by implementing the HAL_USART_MspInit() API: + (##) Enable the USARTx interface clock. + (##) USART pins configuration: + (+++) Enable the clock for the USART GPIOs. + (+++) Configure the USART pins as alternate function pull-up. + (##) NVIC configuration if you need to use interrupt process (HAL_USART_Transmit_IT(), + HAL_USART_Receive_IT() and HAL_USART_TransmitReceive_IT() APIs): + (+++) Configure the USARTx interrupt priority. + (+++) Enable the NVIC USART IRQ handle. + (##) DMA Configuration if you need to use DMA process (HAL_USART_Transmit_DMA() + HAL_USART_Receive_DMA() and HAL_USART_TransmitReceive_DMA() APIs): + (+++) Declare a DMA handle structure for the Tx/Rx channel. + (+++) Enable the DMAx interface clock. + (+++) Configure the declared DMA handle structure with the required Tx/Rx parameters. + (+++) Configure the DMA Tx/Rx channel. + (+++) Associate the initilalized DMA handle to the USART DMA Tx/Rx handle. + (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the DMA Tx/Rx channel. + (+++) Configure the USARTx interrupt priority and enable the NVIC USART IRQ handle + (used for last byte sending completion detection in DMA non circular mode) + + (#) Program the Baud Rate, Word Length, Stop Bit, Parity, Hardware + flow control and Mode(Receiver/Transmitter) in the husart Init structure. + + (#) Initialize the USART registers by calling the HAL_USART_Init() API: + (++) These APIs configures also the low level Hardware GPIO, CLOCK, CORTEX...etc) + by calling the customed HAL_USART_MspInit(&husart) API. + + -@@- The specific USART interrupts (Transmission complete interrupt, + RXNE interrupt and Error Interrupts) will be managed using the macros + __HAL_USART_ENABLE_IT() and __HAL_USART_DISABLE_IT() inside the transmit and receive process. + + (#) Three operation modes are available within this driver : + + *** Polling mode IO operation *** + ================================= + [..] + (+) Send an amount of data in blocking mode using HAL_USART_Transmit() + (+) Receive an amount of data in blocking mode using HAL_USART_Receive() + + *** Interrupt mode IO operation *** + =================================== + [..] + (+) Send an amount of data in non blocking mode using HAL_USART_Transmit_IT() + (+) At transmission end of transfer HAL_USART_TxCpltCallback is executed and user can + add his own code by customization of function pointer HAL_USART_TxCpltCallback + (+) Receive an amount of data in non blocking mode using HAL_USART_Receive_IT() + (+) At reception end of transfer HAL_USART_RxCpltCallback is executed and user can + add his own code by customization of function pointer HAL_USART_RxCpltCallback + (+) In case of transfer Error, HAL_USART_ErrorCallback() function is executed and user can + add his own code by customization of function pointer HAL_USART_ErrorCallback + + *** DMA mode IO operation *** + ============================== + [..] + (+) Send an amount of data in non blocking mode (DMA) using HAL_USART_Transmit_DMA() + (+) At transmission end of half transfer HAL_USART_TxHalfCpltCallback is executed and user can + add his own code by customization of function pointer HAL_USART_TxHalfCpltCallback + (+) At transmission end of transfer HAL_USART_TxCpltCallback is executed and user can + add his own code by customization of function pointer HAL_USART_TxCpltCallback + (+) Receive an amount of data in non blocking mode (DMA) using HAL_USART_Receive_DMA() + (+) At reception end of half transfer HAL_USART_RxHalfCpltCallback is executed and user can + add his own code by customization of function pointer HAL_USART_RxHalfCpltCallback + (+) At reception end of transfer HAL_USART_RxCpltCallback is executed and user can + add his own code by customization of function pointer HAL_USART_RxCpltCallback + (+) In case of transfer Error, HAL_USART_ErrorCallback() function is executed and user can + add his own code by customization of function pointer HAL_USART_ErrorCallback + (+) Pause the DMA Transfer using HAL_USART_DMAPause() + (+) Resume the DMA Transfer using HAL_USART_DMAResume() + (+) Stop the DMA Transfer using HAL_USART_DMAStop() + + *** USART HAL driver macros list *** + ============================================= + [..] + Below the list of most used macros in USART HAL driver. + + (+) __HAL_USART_ENABLE: Enable the USART peripheral + (+) __HAL_USART_DISABLE: Disable the USART peripheral + (+) __HAL_USART_GET_FLAG : Check whether the specified USART flag is set or not + (+) __HAL_USART_CLEAR_FLAG : Clear the specified USART pending flag + (+) __HAL_USART_ENABLE_IT: Enable the specified USART interrupt + (+) __HAL_USART_DISABLE_IT: Disable the specified USART interrupt + (+) __HAL_USART_GET_IT_SOURCE: Check whether the specified USART interrupt has occurred or not + + [..] + (@) You can refer to the USART HAL driver header file for more useful macros + + @endverbatim + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_hal.h" + +/** @addtogroup STM32L1xx_HAL_Driver + * @{ + */ + +/** @defgroup USART USART + * @brief HAL USART Synchronous module driver + * @{ + */ +#ifdef HAL_USART_MODULE_ENABLED +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup USART_Private_Constants USART Private Constants + * @{ + */ +#define DUMMY_DATA 0xFFFF +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @addtogroup USART_Private_Functions USART Private Functions + * @{ + */ +static HAL_StatusTypeDef USART_Transmit_IT(USART_HandleTypeDef *husart); +static HAL_StatusTypeDef USART_EndTransmit_IT(USART_HandleTypeDef *husart); +static HAL_StatusTypeDef USART_Receive_IT(USART_HandleTypeDef *husart); +static HAL_StatusTypeDef USART_TransmitReceive_IT(USART_HandleTypeDef *husart); +static void USART_SetConfig (USART_HandleTypeDef *husart); +static void USART_DMATransmitCplt(DMA_HandleTypeDef *hdma); +static void USART_DMATxHalfCplt(DMA_HandleTypeDef *hdma); +static void USART_DMAReceiveCplt(DMA_HandleTypeDef *hdma); +static void USART_DMARxHalfCplt(DMA_HandleTypeDef *hdma); +static void USART_DMAError(DMA_HandleTypeDef *hdma); +static HAL_StatusTypeDef USART_WaitOnFlagUntilTimeout(USART_HandleTypeDef *husart, uint32_t Flag, FlagStatus Status, uint32_t Timeout); +/** + * @} + */ + +/* Exported functions ---------------------------------------------------------*/ + + +/** @defgroup USART_Exported_Functions USART Exported Functions + * @{ + */ + +/** @defgroup USART_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + ============================================================================== + ##### Initialization and Configuration functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to initialize the USART + in asynchronous and in synchronous modes. + (+) For the asynchronous mode only these parameters can be configured: + (++) Baud Rate + (++) Word Length + (++) Stop Bit + (++) Parity + (++) USART polarity + (++) USART phase + (++) USART LastBit + (++) Receiver/transmitter modes + + [..] + The HAL_USART_Init() function follows the USART synchronous configuration + procedure (details for the procedure are available in reference manual (RM0038)). + +@endverbatim + * @{ + */ + +/* + Additionnal remark: If the parity is enabled, then the MSB bit of the data written + in the data register is transmitted but is changed by the parity bit. + Depending on the frame length defined by the M bit (8-bits or 9-bits), + the possible USART frame formats are as listed in the following table: + +-------------------------------------------------------------+ + | M bit | PCE bit | USART frame | + |---------------------|---------------------------------------| + | 0 | 0 | | SB | 8 bit data | STB | | + |---------|-----------|---------------------------------------| + | 0 | 1 | | SB | 7 bit data | PB | STB | | + |---------|-----------|---------------------------------------| + | 1 | 0 | | SB | 9 bit data | STB | | + |---------|-----------|---------------------------------------| + | 1 | 1 | | SB | 8 bit data | PB | STB | | + +-------------------------------------------------------------+ +*/ + +/** + * @brief Initializes the USART mode according to the specified + * parameters in the USART_InitTypeDef and create the associated handle. + * @param husart: Pointer to a USART_HandleTypeDef structure that contains + * the configuration information for the specified USART module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_Init(USART_HandleTypeDef *husart) +{ + /* Check the USART handle allocation */ + if(husart == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_USART_INSTANCE(husart->Instance)); + + if(husart->State == HAL_USART_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + husart->Lock = HAL_UNLOCKED; + + /* Init the low level hardware */ + HAL_USART_MspInit(husart); + } + + husart->State = HAL_USART_STATE_BUSY; + + /* Set the USART Communication parameters */ + USART_SetConfig(husart); + + /* In USART mode, the following bits must be kept cleared: + - LINEN bit in the USART_CR2 register + - HDSEL, SCEN and IREN bits in the USART_CR3 register */ + CLEAR_BIT(husart->Instance->CR2, USART_CR2_LINEN); + CLEAR_BIT(husart->Instance->CR3, (USART_CR3_IREN | USART_CR3_SCEN | USART_CR3_HDSEL)); + + /* Enable the Peripheral */ + __HAL_USART_ENABLE(husart); + + /* Initialize the USART state */ + husart->ErrorCode = HAL_USART_ERROR_NONE; + husart->State= HAL_USART_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the USART peripheral. + * @param husart: Pointer to a USART_HandleTypeDef structure that contains + * the configuration information for the specified USART module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_DeInit(USART_HandleTypeDef *husart) +{ + /* Check the USART handle allocation */ + if(husart == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_USART_INSTANCE(husart->Instance)); + + husart->State = HAL_USART_STATE_BUSY; + + /* Disable the Peripheral */ + __HAL_USART_DISABLE(husart); + + /* DeInit the low level hardware */ + HAL_USART_MspDeInit(husart); + + husart->ErrorCode = HAL_USART_ERROR_NONE; + husart->State = HAL_USART_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(husart); + + return HAL_OK; +} + +/** + * @brief USART MSP Init. + * @param husart: Pointer to a USART_HandleTypeDef structure that contains + * the configuration information for the specified USART module. + * @retval None + */ + __weak void HAL_USART_MspInit(USART_HandleTypeDef *husart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(husart); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_USART_MspInit can be implemented in the user file + */ +} + +/** + * @brief USART MSP DeInit. + * @param husart: Pointer to a USART_HandleTypeDef structure that contains + * the configuration information for the specified USART module. + * @retval None + */ + __weak void HAL_USART_MspDeInit(USART_HandleTypeDef *husart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(husart); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_USART_MspDeInit can be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup USART_Exported_Functions_Group2 IO operation functions + * @brief USART Transmit and Receive functions + * +@verbatim + ============================================================================== + ##### IO operation functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to manage the USART synchronous + data transfers. + + [..] + The USART supports master mode only: it cannot receive or send data related to an input + clock (SCLK is always an output). + + (#) There are two modes of transfer: + (++) Blocking mode: The communication is performed in polling mode. + The HAL status of all data processing is returned by the same function + after finishing transfer. + (++) No-Blocking mode: The communication is performed using Interrupts + or DMA, These API's return the HAL status. + The end of the data processing will be indicated through the + dedicated USART IRQ when using Interrupt mode or the DMA IRQ when + using DMA mode. + The HAL_USART_TxCpltCallback(), HAL_USART_RxCpltCallback() and HAL_USART_TxRxCpltCallback() + user callbacks + will be executed respectively at the end of the transmit or Receive process + The HAL_USART_ErrorCallback() user callback will be executed when a communication + error is detected + + (#) Blocking mode APIs are : + (++) HAL_USART_Transmit() in simplex mode + (++) HAL_USART_Receive() in full duplex receive only + (++) HAL_USART_TransmitReceive() in full duplex mode + + (#) Non Blocking mode APIs with Interrupt are : + (++) HAL_USART_Transmit_IT()in simplex mode + (++) HAL_USART_Receive_IT() in full duplex receive only + (++) HAL_USART_TransmitReceive_IT() in full duplex mode + (++) HAL_USART_IRQHandler() + + (#) Non Blocking mode functions with DMA are : + (++) HAL_USART_Transmit_DMA()in simplex mode + (++) HAL_USART_Receive_DMA() in full duplex receive only + (++) HAL_USART_TransmitReceive_DMA() in full duplex mode + (++) HAL_USART_DMAPause() + (++) HAL_USART_DMAResume() + (++) HAL_USART_DMAStop() + + (#) A set of Transfer Complete Callbacks are provided in non Blocking mode: + (++) HAL_USART_TxHalfCpltCallback() + (++) HAL_USART_TxCpltCallback() + (++) HAL_USART_RxHalfCpltCallback() + (++) HAL_USART_RxCpltCallback() + (++) HAL_USART_ErrorCallback() + (++) HAL_USART_TxRxCpltCallback() + +@endverbatim + * @{ + */ + +/** + * @brief Simplex Send an amount of data in blocking mode. + * @param husart: Pointer to a USART_HandleTypeDef structure that contains + * the configuration information for the specified USART module. + * @param pTxData: Pointer to data buffer + * @param Size: Amount of data to be sent + * @param Timeout: Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_Transmit(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size, uint32_t Timeout) +{ + uint16_t* tmp=0; + + if(husart->State == HAL_USART_STATE_READY) + { + if((pTxData == NULL) || (Size == 0)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(husart); + + husart->ErrorCode = HAL_USART_ERROR_NONE; + husart->State = HAL_USART_STATE_BUSY_TX; + + husart->TxXferSize = Size; + husart->TxXferCount = Size; + while(husart->TxXferCount > 0) + { + husart->TxXferCount--; + if(husart->Init.WordLength == USART_WORDLENGTH_9B) + { + /* Wait for TC flag in order to write data in DR */ + if(USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_TXE, RESET, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + tmp = (uint16_t*) pTxData; + WRITE_REG(husart->Instance->DR, (*tmp & (uint16_t)0x01FF)); + if(husart->Init.Parity == USART_PARITY_NONE) + { + pTxData += 2; + } + else + { + pTxData += 1; + } + } + else + { + if(USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_TXE, RESET, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + WRITE_REG(husart->Instance->DR, (*pTxData++ & (uint8_t)0xFF)); + } + } + + if(USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_TC, RESET, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + + husart->State = HAL_USART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Full-Duplex Receive an amount of data in blocking mode. + * @param husart: Pointer to a USART_HandleTypeDef structure that contains + * the configuration information for the specified USART module. + * @param pRxData: Pointer to data buffer + * @param Size: Amount of data to be received + * @param Timeout: Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_Receive(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size, uint32_t Timeout) +{ + uint16_t* tmp=0; + + if(husart->State == HAL_USART_STATE_READY) + { + if((pRxData == NULL) || (Size == 0)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(husart); + + husart->ErrorCode = HAL_USART_ERROR_NONE; + husart->State = HAL_USART_STATE_BUSY_RX; + + husart->RxXferSize = Size; + husart->RxXferCount = Size; + /* Check the remain data to be received */ + while(husart->RxXferCount > 0) + { + husart->RxXferCount--; + if(husart->Init.WordLength == USART_WORDLENGTH_9B) + { + /* Wait until TXE flag is set to send dummy byte in order to generate the clock for the slave to send data */ + if(USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_TXE, RESET, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + /* Send dummy byte in order to generate clock */ + WRITE_REG(husart->Instance->DR, (DUMMY_DATA & (uint16_t)0x01FF)); + + /* Wait for RXNE Flag */ + if(USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_RXNE, RESET, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + tmp = (uint16_t*) pRxData ; + if(husart->Init.Parity == USART_PARITY_NONE) + { + *tmp = (uint16_t)(husart->Instance->DR & (uint16_t)0x01FF); + pRxData +=2; + } + else + { + *tmp = (uint16_t)(husart->Instance->DR & (uint16_t)0x00FF); + pRxData +=1; + } + } + else + { + /* Wait until TXE flag is set to send dummy byte in order to generate the clock for the slave to send data */ + if(USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_TXE, RESET, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + + /* Send Dummy Byte in order to generate clock */ + WRITE_REG(husart->Instance->DR, (DUMMY_DATA & (uint16_t)0x00FF)); + + /* Wait until RXNE flag is set to receive the byte */ + if(USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_RXNE, RESET, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + if(husart->Init.Parity == USART_PARITY_NONE) + { + /* Receive data */ + *pRxData++ = (uint8_t)(husart->Instance->DR & (uint8_t)0x00FF); + } + else + { + /* Receive data */ + *pRxData++ = (uint8_t)(husart->Instance->DR & (uint8_t)0x007F); + } + + } + } + + husart->State = HAL_USART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Full-Duplex Send receive an amount of data in full-duplex mode (blocking mode). + * @param husart: Pointer to a USART_HandleTypeDef structure that contains + * the configuration information for the specified USART module. + * @param pTxData: Pointer to data transmitted buffer + * @param pRxData: Pointer to data received buffer + * @param Size: Amount of data to be sent + * @param Timeout: Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_TransmitReceive(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size, uint32_t Timeout) +{ + uint16_t* tmp=0; + + if(husart->State == HAL_USART_STATE_READY) + { + if((pTxData == NULL) || (pRxData == NULL) || (Size == 0)) + { + return HAL_ERROR; + } + /* Process Locked */ + __HAL_LOCK(husart); + + husart->ErrorCode = HAL_USART_ERROR_NONE; + husart->State = HAL_USART_STATE_BUSY_RX; + + husart->RxXferSize = Size; + husart->TxXferSize = Size; + husart->TxXferCount = Size; + husart->RxXferCount = Size; + + /* Check the remain data to be received */ + while(husart->TxXferCount > 0) + { + husart->TxXferCount--; + husart->RxXferCount--; + if(husart->Init.WordLength == USART_WORDLENGTH_9B) + { + /* Wait for TC flag in order to write data in DR */ + if(USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_TXE, RESET, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + tmp = (uint16_t*) pTxData; + WRITE_REG(husart->Instance->DR, (*tmp & (uint16_t)0x01FF)); + if(husart->Init.Parity == USART_PARITY_NONE) + { + pTxData += 2; + } + else + { + pTxData += 1; + } + + /* Wait for RXNE Flag */ + if(USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_RXNE, RESET, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + tmp = (uint16_t*) pRxData ; + if(husart->Init.Parity == USART_PARITY_NONE) + { + *tmp = (uint16_t)(husart->Instance->DR & (uint16_t)0x01FF); + pRxData += 2; + } + else + { + *tmp = (uint16_t)(husart->Instance->DR & (uint16_t)0x00FF); + pRxData += 1; + } + } + else + { + /* Wait for TC flag in order to write data in DR */ + if(USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_TXE, RESET, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + WRITE_REG(husart->Instance->DR, (*pTxData++ & (uint8_t)0x00FF)); + + /* Wait for RXNE Flag */ + if(USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_RXNE, RESET, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + if(husart->Init.Parity == USART_PARITY_NONE) + { + /* Receive data */ + *pRxData++ = (uint8_t)(husart->Instance->DR & (uint8_t)0x00FF); + } + else + { + /* Receive data */ + *pRxData++ = (uint8_t)(husart->Instance->DR & (uint8_t)0x007F); + } + } + } + + husart->State = HAL_USART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Simplex Send an amount of data in non-blocking mode. + * @param husart: Pointer to a USART_HandleTypeDef structure that contains + * the configuration information for the specified USART module. + * @param pTxData: Pointer to data buffer + * @param Size: Amount of data to be sent + * @retval HAL status + * @note The USART errors are not managed to avoid the overrun error. + */ +HAL_StatusTypeDef HAL_USART_Transmit_IT(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size) +{ + if(husart->State == HAL_USART_STATE_READY) + { + if((pTxData == NULL) || (Size == 0)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(husart); + + husart->pTxBuffPtr = pTxData; + husart->TxXferSize = Size; + husart->TxXferCount = Size; + + husart->ErrorCode = HAL_USART_ERROR_NONE; + husart->State = HAL_USART_STATE_BUSY_TX; + + /* The USART Error Interrupts: (Frame error, Noise error, Overrun error) + are not managed by the USART transmit process to avoid the overrun interrupt + when the USART mode is configured for transmit and receive "USART_MODE_TX_RX" + to benefit for the frame error and noise interrupts the USART mode should be + configured only for transmit "USART_MODE_TX" + The __HAL_USART_ENABLE_IT(husart, USART_IT_ERR) can be used to enable the Frame error, + Noise error interrupt */ + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + /* Enable the USART Transmit Data Register Empty Interrupt */ + __HAL_USART_ENABLE_IT(husart, USART_IT_TXE); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Simplex Receive an amount of data in non-blocking mode. + * @param husart: Pointer to a USART_HandleTypeDef structure that contains + * the configuration information for the specified USART module. + * @param pRxData: Pointer to data buffer + * @param Size: Amount of data to be received + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_Receive_IT(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size) +{ + if(husart->State == HAL_USART_STATE_READY) + { + if((pRxData == NULL) || (Size == 0)) + { + return HAL_ERROR; + } + /* Process Locked */ + __HAL_LOCK(husart); + + husart->pRxBuffPtr = pRxData; + husart->RxXferSize = Size; + husart->RxXferCount = Size; + + husart->ErrorCode = HAL_USART_ERROR_NONE; + husart->State = HAL_USART_STATE_BUSY_RX; + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + /* Enable the USART Data Register not empty Interrupt */ + __HAL_USART_ENABLE_IT(husart, USART_IT_RXNE); + + /* Enable the USART Parity Error Interrupt */ + __HAL_USART_ENABLE_IT(husart, USART_IT_PE); + + /* Enable the USART Error Interrupt: (Frame error, noise error, overrun error) */ + __HAL_USART_ENABLE_IT(husart, USART_IT_ERR); + + /* Send dummy byte in order to generate the clock for the slave to send data */ + WRITE_REG(husart->Instance->DR, (DUMMY_DATA & (uint16_t)0x01FF)); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Full-Duplex Send receive an amount of data in full-duplex mode (non-blocking). + * @param husart: Pointer to a USART_HandleTypeDef structure that contains + * the configuration information for the specified USART module. + * @param pTxData: Pointer to data transmitted buffer + * @param pRxData: Pointer to data received buffer + * @param Size: Amount of data to be received + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_TransmitReceive_IT(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size) +{ + if(husart->State == HAL_USART_STATE_READY) + { + if((pTxData == NULL) || (pRxData == NULL) || (Size == 0)) + { + return HAL_ERROR; + } + /* Process Locked */ + __HAL_LOCK(husart); + + husart->pRxBuffPtr = pRxData; + husart->RxXferSize = Size; + husart->RxXferCount = Size; + husart->pTxBuffPtr = pTxData; + husart->TxXferSize = Size; + husart->TxXferCount = Size; + + husart->ErrorCode = HAL_USART_ERROR_NONE; + husart->State = HAL_USART_STATE_BUSY_TX_RX; + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + /* Enable the USART Data Register not empty Interrupt */ + __HAL_USART_ENABLE_IT(husart, USART_IT_RXNE); + + /* Enable the USART Parity Error Interrupt */ + __HAL_USART_ENABLE_IT(husart, USART_IT_PE); + + /* Enable the USART Error Interrupt: (Frame error, noise error, overrun error) */ + __HAL_USART_ENABLE_IT(husart, USART_IT_ERR); + + /* Enable the USART Transmit Data Register Empty Interrupt */ + __HAL_USART_ENABLE_IT(husart, USART_IT_TXE); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Simplex Send an amount of data in non-blocking mode. + * @param husart: Pointer to a USART_HandleTypeDef structure that contains + * the configuration information for the specified USART module. + * @param pTxData: Pointer to data buffer + * @param Size: Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_Transmit_DMA(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size) +{ + uint32_t *tmp=0; + + if(husart->State == HAL_USART_STATE_READY) + { + if((pTxData == NULL) || (Size == 0)) + { + return HAL_ERROR; + } + /* Process Locked */ + __HAL_LOCK(husart); + + husart->pTxBuffPtr = pTxData; + husart->TxXferSize = Size; + husart->TxXferCount = Size; + + husart->ErrorCode = HAL_USART_ERROR_NONE; + husart->State = HAL_USART_STATE_BUSY_TX; + + /* Set the USART DMA transfer complete callback */ + husart->hdmatx->XferCpltCallback = USART_DMATransmitCplt; + + /* Set the USART DMA Half transfer complete callback */ + husart->hdmatx->XferHalfCpltCallback = USART_DMATxHalfCplt; + + /* Set the DMA error callback */ + husart->hdmatx->XferErrorCallback = USART_DMAError; + + /* Enable the USART transmit DMA channel */ + tmp = (uint32_t*)&pTxData; + HAL_DMA_Start_IT(husart->hdmatx, *(uint32_t*)tmp, (uint32_t)&husart->Instance->DR, Size); + + /* Clear the TC flag in the SR register by writing 0 to it */ + __HAL_USART_CLEAR_FLAG(husart, USART_FLAG_TC); + + /* Enable the DMA transfer for transmit request by setting the DMAT bit + in the USART CR3 register */ + SET_BIT(husart->Instance->CR3, USART_CR3_DMAT); + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Full-Duplex Receive an amount of data in non-blocking mode. + * @param husart: Pointer to a USART_HandleTypeDef structure that contains + * the configuration information for the specified USART module. + * @param pRxData: Pointer to data buffer + * @param Size: Amount of data to be received + * @retval HAL status + * @note The USART DMA transmit channel must be configured in order to generate the clock for the slave. + * @note When the USART parity is enabled (PCE = 1) the data received contain the parity bit. + */ +HAL_StatusTypeDef HAL_USART_Receive_DMA(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size) +{ + uint32_t *tmp=0; + + if(husart->State == HAL_USART_STATE_READY) + { + if((pRxData == NULL) || (Size == 0)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(husart); + + husart->pRxBuffPtr = pRxData; + husart->RxXferSize = Size; + husart->pTxBuffPtr = pRxData; + husart->TxXferSize = Size; + + husart->ErrorCode = HAL_USART_ERROR_NONE; + husart->State = HAL_USART_STATE_BUSY_RX; + + /* Set the USART DMA Rx transfer complete callback */ + husart->hdmarx->XferCpltCallback = USART_DMAReceiveCplt; + + /* Set the USART DMA Half transfer complete callback */ + husart->hdmarx->XferHalfCpltCallback = USART_DMARxHalfCplt; + + /* Set the USART DMA Rx transfer error callback */ + husart->hdmarx->XferErrorCallback = USART_DMAError; + + /* Enable the USART receive DMA channel */ + tmp = (uint32_t*)&pRxData; + HAL_DMA_Start_IT(husart->hdmarx, (uint32_t)&husart->Instance->DR, *(uint32_t*)tmp, Size); + + /* Enable the USART transmit DMA channel: the transmit channel is used in order + to generate in the non-blocking mode the clock to the slave device, + this mode isn't a simplex receive mode but a full-duplex receive one */ + HAL_DMA_Start_IT(husart->hdmatx, *(uint32_t*)tmp, (uint32_t)&husart->Instance->DR, Size); + + /* Clear the Overrun flag just before enabling the DMA Rx request: mandatory for the second transfer + when using the USART in circular mode */ + __HAL_USART_CLEAR_OREFLAG(husart); + + /* Enable the DMA transfer for the receiver request by setting the DMAR bit + in the USART CR3 register */ + SET_BIT(husart->Instance->CR3, USART_CR3_DMAR); + + /* Enable the DMA transfer for transmit request by setting the DMAT bit + in the USART CR3 register */ + SET_BIT(husart->Instance->CR3, USART_CR3_DMAT); + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Full-Duplex Transmit Receive an amount of data in non-blocking mode. + * @param husart: Pointer to a USART_HandleTypeDef structure that contains + * the configuration information for the specified USART module. + * @param pTxData: Pointer to data transmitted buffer + * @param pRxData: Pointer to data received buffer + * @param Size: Amount of data to be received + * @note When the USART parity is enabled (PCE = 1) the data received contain the parity bit. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_TransmitReceive_DMA(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size) +{ + uint32_t *tmp=0; + + if(husart->State == HAL_USART_STATE_READY) + { + if((pTxData == NULL) || (pRxData == NULL) || (Size == 0)) + { + return HAL_ERROR; + } + /* Process Locked */ + __HAL_LOCK(husart); + + husart->pRxBuffPtr = pRxData; + husart->RxXferSize = Size; + husart->pTxBuffPtr = pTxData; + husart->TxXferSize = Size; + + husart->ErrorCode = HAL_USART_ERROR_NONE; + husart->State = HAL_USART_STATE_BUSY_TX_RX; + + /* Set the USART DMA Rx transfer complete callback */ + husart->hdmarx->XferCpltCallback = USART_DMAReceiveCplt; + + /* Set the USART DMA Half transfer complete callback */ + husart->hdmarx->XferHalfCpltCallback = USART_DMARxHalfCplt; + + /* Set the USART DMA Tx transfer complete callback */ + husart->hdmatx->XferCpltCallback = USART_DMATransmitCplt; + + /* Set the USART DMA Half transfer complete callback */ + husart->hdmatx->XferHalfCpltCallback = USART_DMATxHalfCplt; + + /* Set the USART DMA Tx transfer error callback */ + husart->hdmatx->XferErrorCallback = USART_DMAError; + + /* Set the USART DMA Rx transfer error callback */ + husart->hdmarx->XferErrorCallback = USART_DMAError; + + /* Enable the USART receive DMA channel */ + tmp = (uint32_t*)&pRxData; + HAL_DMA_Start_IT(husart->hdmarx, (uint32_t)&husart->Instance->DR, *(uint32_t*)tmp, Size); + + /* Enable the USART transmit DMA channel */ + tmp = (uint32_t*)&pTxData; + HAL_DMA_Start_IT(husart->hdmatx, *(uint32_t*)tmp, (uint32_t)&husart->Instance->DR, Size); + + /* Clear the TC flag in the SR register by writing 0 to it */ + __HAL_USART_CLEAR_FLAG(husart, USART_FLAG_TC); + + /* Clear the Overrun flag: mandatory for the second transfer in circular mode */ + __HAL_USART_CLEAR_OREFLAG(husart); + + /* Enable the DMA transfer for the receiver request by setting the DMAR bit + in the USART CR3 register */ + SET_BIT(husart->Instance->CR3, USART_CR3_DMAR); + + /* Enable the DMA transfer for transmit request by setting the DMAT bit + in the USART CR3 register */ + SET_BIT(husart->Instance->CR3, USART_CR3_DMAT); + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Pauses the DMA Transfer. + * @param husart: Pointer to a USART_HandleTypeDef structure that contains + * the configuration information for the specified USART module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_DMAPause(USART_HandleTypeDef *husart) +{ + /* Process Locked */ + __HAL_LOCK(husart); + + /* Disable the USART DMA Tx request */ + CLEAR_BIT(husart->Instance->CR3, (uint32_t)(USART_CR3_DMAT)); + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + return HAL_OK; +} + +/** + * @brief Resumes the DMA Transfer. + * @param husart: Pointer to a USART_HandleTypeDef structure that contains + * the configuration information for the specified USART module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_DMAResume(USART_HandleTypeDef *husart) +{ + /* Process Locked */ + __HAL_LOCK(husart); + + /* Enable the USART DMA Tx request */ + SET_BIT(husart->Instance->CR3, USART_CR3_DMAT); + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + return HAL_OK; +} + +/** + * @brief Stops the DMA Transfer. + * @param husart: Pointer to a USART_HandleTypeDef structure that contains + * the configuration information for the specified USART module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_DMAStop(USART_HandleTypeDef *husart) +{ + /* The Lock is not implemented on this API to allow the user application + to call the HAL USART API under callbacks HAL_USART_TxCpltCallback() / HAL_USART_RxCpltCallback(): + when calling HAL_DMA_Abort() API the DMA TX/RX Transfer complete interrupt is generated + and the correspond call back is executed HAL_USART_TxCpltCallback() / HAL_USART_RxCpltCallback() + */ + + /* Abort the USART DMA Tx channel */ + if(husart->hdmatx != NULL) + { + HAL_DMA_Abort(husart->hdmatx); + } + /* Abort the USART DMA Rx channel */ + if(husart->hdmarx != NULL) + { + HAL_DMA_Abort(husart->hdmarx); + } + + /* Disable the USART Tx/Rx DMA requests */ + CLEAR_BIT(husart->Instance->CR3, (USART_CR3_DMAT | USART_CR3_DMAR)); + + husart->State = HAL_USART_STATE_READY; + + return HAL_OK; +} + +/** + * @brief This function handles USART interrupt request. + * @param husart: Pointer to a USART_HandleTypeDef structure that contains + * the configuration information for the specified USART module. + * @retval None + */ +void HAL_USART_IRQHandler(USART_HandleTypeDef *husart) +{ + uint32_t tmp_flag = 0, tmp_it_source = 0; + + tmp_flag = __HAL_USART_GET_FLAG(husart, USART_FLAG_PE); + tmp_it_source = __HAL_USART_GET_IT_SOURCE(husart, USART_IT_PE); + /* USART parity error interrupt occurred -----------------------------------*/ + if((tmp_flag != RESET) && (tmp_it_source != RESET)) + { + husart->ErrorCode |= HAL_USART_ERROR_PE; + } + + tmp_flag = __HAL_USART_GET_FLAG(husart, USART_FLAG_FE); + tmp_it_source = __HAL_USART_GET_IT_SOURCE(husart, USART_IT_ERR); + /* USART frame error interrupt occurred ------------------------------------*/ + if((tmp_flag != RESET) && (tmp_it_source != RESET)) + { + husart->ErrorCode |= HAL_USART_ERROR_FE; + } + + tmp_flag = __HAL_USART_GET_FLAG(husart, USART_FLAG_NE); + /* USART noise error interrupt occurred ------------------------------------*/ + if((tmp_flag != RESET) && (tmp_it_source != RESET)) + { + husart->ErrorCode |= HAL_USART_ERROR_NE; + } + + tmp_flag = __HAL_USART_GET_FLAG(husart, USART_FLAG_ORE); + /* USART Over-Run interrupt occurred ---------------------------------------*/ + if((tmp_flag != RESET) && (tmp_it_source != RESET)) + { + husart->ErrorCode |= HAL_USART_ERROR_ORE; + } + + if(husart->ErrorCode != HAL_USART_ERROR_NONE) + { + /* Clear all the error flag at once */ + __HAL_USART_CLEAR_PEFLAG(husart); + + /* Set the USART state ready to be able to start again the process */ + husart->State = HAL_USART_STATE_READY; + + HAL_USART_ErrorCallback(husart); + } + + tmp_flag = __HAL_USART_GET_FLAG(husart, USART_FLAG_RXNE); + tmp_it_source = __HAL_USART_GET_IT_SOURCE(husart, USART_IT_RXNE); + /* USART in mode Receiver --------------------------------------------------*/ + if((tmp_flag != RESET) && (tmp_it_source != RESET)) + { + if(husart->State == HAL_USART_STATE_BUSY_RX) + { + USART_Receive_IT(husart); + } + else + { + USART_TransmitReceive_IT(husart); + } + } + + tmp_flag = __HAL_USART_GET_FLAG(husart, USART_FLAG_TXE); + tmp_it_source = __HAL_USART_GET_IT_SOURCE(husart, USART_IT_TXE); + /* USART in mode Transmitter -----------------------------------------------*/ + if((tmp_flag != RESET) && (tmp_it_source != RESET)) + { + if(husart->State == HAL_USART_STATE_BUSY_TX) + { + USART_Transmit_IT(husart); + } + else + { + USART_TransmitReceive_IT(husart); + } + } + + tmp_flag = __HAL_USART_GET_FLAG(husart, USART_FLAG_TC); + tmp_it_source = __HAL_USART_GET_IT_SOURCE(husart, USART_IT_TC); + /* USART in mode Transmitter (transmission end) -----------------------------*/ + if((tmp_flag != RESET) && (tmp_it_source != RESET)) + { + USART_EndTransmit_IT(husart); + } + +} + + +/** + * @brief Tx Transfer completed callbacks. + * @param husart: Pointer to a USART_HandleTypeDef structure that contains + * the configuration information for the specified USART module. + * @retval None + */ + __weak void HAL_USART_TxCpltCallback(USART_HandleTypeDef *husart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(husart); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_USART_TxCpltCallback can be implemented in the user file + */ +} + +/** + * @brief Tx Half Transfer completed callbacks. + * @param husart: Pointer to a USART_HandleTypeDef structure that contains + * the configuration information for the specified USART module. + * @retval None + */ + __weak void HAL_USART_TxHalfCpltCallback(USART_HandleTypeDef *husart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(husart); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_USART_TxHalfCpltCallback can be implemented in the user file + */ +} + +/** + * @brief Rx Transfer completed callbacks. + * @param husart: Pointer to a USART_HandleTypeDef structure that contains + * the configuration information for the specified USART module. + * @retval None + */ +__weak void HAL_USART_RxCpltCallback(USART_HandleTypeDef *husart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(husart); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_USART_RxCpltCallback can be implemented in the user file + */ +} + +/** + * @brief Rx Half Transfer completed callbacks. + * @param husart: Pointer to a USART_HandleTypeDef structure that contains + * the configuration information for the specified USART module. + * @retval None + */ +__weak void HAL_USART_RxHalfCpltCallback(USART_HandleTypeDef *husart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(husart); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_USART_RxHalfCpltCallback can be implemented in the user file + */ +} + +/** + * @brief Tx/Rx Transfers completed callback for the non-blocking process. + * @param husart: Pointer to a USART_HandleTypeDef structure that contains + * the configuration information for the specified USART module. + * @retval None + */ +__weak void HAL_USART_TxRxCpltCallback(USART_HandleTypeDef *husart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(husart); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_USART_TxRxCpltCallback can be implemented in the user file + */ +} + +/** + * @brief USART error callbacks. + * @param husart: Pointer to a USART_HandleTypeDef structure that contains + * the configuration information for the specified USART module. + * @retval None + */ + __weak void HAL_USART_ErrorCallback(USART_HandleTypeDef *husart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(husart); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_USART_ErrorCallback can be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup USART_Exported_Functions_Group3 Peripheral State and Errors functions + * @brief USART State and Errors functions + * +@verbatim + ============================================================================== + ##### Peripheral State and Errors functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to return the State of + USART communication + process, return Peripheral Errors occurred during communication process + (+) HAL_USART_GetState() API can be helpful to check in run-time the state + of the USART peripheral. + (+) HAL_USART_GetError() check in run-time errors that could be occurred during + communication. +@endverbatim + * @{ + */ + +/** + * @brief Returns the USART state. + * @param husart: Pointer to a USART_HandleTypeDef structure that contains + * the configuration information for the specified USART module. + * @retval HAL state + */ +HAL_USART_StateTypeDef HAL_USART_GetState(USART_HandleTypeDef *husart) +{ + return husart->State; +} + +/** + * @brief Return the USART error code + * @param husart : pointer to a USART_HandleTypeDef structure that contains + * the configuration information for the specified USART. + * @retval USART Error Code + */ +uint32_t HAL_USART_GetError(USART_HandleTypeDef *husart) +{ + return husart->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup USART_Private_Functions USART Private Functions + * @brief USART Private functions + * @{ + */ +/** + * @brief DMA USART transmit process complete callback. + * @param hdma: Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void USART_DMATransmitCplt(DMA_HandleTypeDef *hdma) +{ + USART_HandleTypeDef* husart = ( USART_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; + + /* DMA Normal mode */ + if ( HAL_IS_BIT_CLR(hdma->Instance->CCR, DMA_CCR_CIRC) ) + { + husart->TxXferCount = 0; + + if(husart->State == HAL_USART_STATE_BUSY_TX) + { + /* Disable the DMA transfer for transmit request by resetting the DMAT bit + in the USART CR3 register */ + CLEAR_BIT(husart->Instance->CR3, USART_CR3_DMAT); + + /* Enable the USART Transmit Complete Interrupt */ + __HAL_USART_ENABLE_IT(husart, USART_IT_TC); + } + } + /* DMA Circular mode */ + else + { + if(husart->State == HAL_USART_STATE_BUSY_TX) + { + HAL_USART_TxCpltCallback(husart); + } + } +} + +/** + * @brief DMA USART transmit process half complete callback + * @param hdma: Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void USART_DMATxHalfCplt(DMA_HandleTypeDef *hdma) +{ + USART_HandleTypeDef* husart = (USART_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent; + + HAL_USART_TxHalfCpltCallback(husart); +} + +/** + * @brief DMA USART receive process complete callback. + * @param hdma: Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void USART_DMAReceiveCplt(DMA_HandleTypeDef *hdma) +{ + USART_HandleTypeDef* husart = ( USART_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; + + /* DMA Normal mode */ + if ( HAL_IS_BIT_CLR(hdma->Instance->CCR, DMA_CCR_CIRC) ) + { + husart->RxXferCount = 0; + if(husart->State == HAL_USART_STATE_BUSY_RX) + { + /* Disable the DMA transfer for the receiver requests by setting the DMAR bit + in the USART CR3 register */ + CLEAR_BIT(husart->Instance->CR3, USART_CR3_DMAR); + + husart->State= HAL_USART_STATE_READY; + HAL_USART_RxCpltCallback(husart); + } + /* the usart state is HAL_USART_STATE_BUSY_TX_RX*/ + else + { + /* Disable the DMA transfer for the Transmit/receiver requests by setting the DMAT/DMAR bit + in the USART CR3 register */ + CLEAR_BIT(husart->Instance->CR3, (USART_CR3_DMAT | USART_CR3_DMAR)); + + husart->State= HAL_USART_STATE_READY; + HAL_USART_TxRxCpltCallback(husart); + } + } + /* DMA circular mode */ + else + { + if(husart->State == HAL_USART_STATE_BUSY_RX) + { + HAL_USART_RxCpltCallback(husart); + } + /* the usart state is HAL_USART_STATE_BUSY_TX_RX*/ + else + { + HAL_USART_TxRxCpltCallback(husart); + } + } +} + +/** + * @brief DMA USART receive process half complete callback + * @param hdma: Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void USART_DMARxHalfCplt(DMA_HandleTypeDef *hdma) +{ + USART_HandleTypeDef* husart = (USART_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent; + + HAL_USART_RxHalfCpltCallback(husart); +} + +/** + * @brief DMA USART communication error callback. + * @param hdma: Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void USART_DMAError(DMA_HandleTypeDef *hdma) +{ + USART_HandleTypeDef* husart = ( USART_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; + + husart->RxXferCount = 0; + husart->TxXferCount = 0; + husart->ErrorCode |= HAL_USART_ERROR_DMA; + husart->State= HAL_USART_STATE_READY; + + HAL_USART_ErrorCallback(husart); +} + +/** + * @brief This function handles USART Communication Timeout. + * @param husart: Pointer to a USART_HandleTypeDef structure that contains + * the configuration information for the specified USART module. + * @param Flag: specifies the USART flag to check. + * @param Status: The new Flag status (SET or RESET). + * @param Timeout: Timeout duration + * @retval HAL status + */ +static HAL_StatusTypeDef USART_WaitOnFlagUntilTimeout(USART_HandleTypeDef *husart, uint32_t Flag, FlagStatus Status, uint32_t Timeout) +{ + uint32_t tickstart = 0; + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Wait until flag is set */ + if(Status == RESET) + { + while(__HAL_USART_GET_FLAG(husart, Flag) == RESET) + { + /* Check for the Timeout */ + if(Timeout != HAL_MAX_DELAY) + { + if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout)) + { + /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */ + __HAL_USART_DISABLE_IT(husart, USART_IT_TXE); + __HAL_USART_DISABLE_IT(husart, USART_IT_RXNE); + __HAL_USART_DISABLE_IT(husart, USART_IT_PE); + __HAL_USART_DISABLE_IT(husart, USART_IT_ERR); + + husart->State= HAL_USART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + return HAL_TIMEOUT; + } + } + } + } + else + { + while(__HAL_USART_GET_FLAG(husart, Flag) != RESET) + { + /* Check for the Timeout */ + if(Timeout != HAL_MAX_DELAY) + { + if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout)) + { + /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */ + __HAL_USART_DISABLE_IT(husart, USART_IT_TXE); + __HAL_USART_DISABLE_IT(husart, USART_IT_RXNE); + __HAL_USART_DISABLE_IT(husart, USART_IT_PE); + __HAL_USART_DISABLE_IT(husart, USART_IT_ERR); + + husart->State= HAL_USART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + return HAL_TIMEOUT; + } + } + } + } + return HAL_OK; +} + +/** + * @brief Simplex Send an amount of data in non-blocking mode. + * @param husart: Pointer to a USART_HandleTypeDef structure that contains + * the configuration information for the specified USART module. + * @retval HAL status + * @note The USART errors are not managed to avoid the overrun error. + */ +static HAL_StatusTypeDef USART_Transmit_IT(USART_HandleTypeDef *husart) +{ + uint16_t* tmp=0; + + if(husart->State == HAL_USART_STATE_BUSY_TX) + { + if(husart->Init.WordLength == USART_WORDLENGTH_9B) + { + tmp = (uint16_t*) husart->pTxBuffPtr; + WRITE_REG(husart->Instance->DR, (uint16_t)(*tmp & (uint16_t)0x01FF)); + if(husart->Init.Parity == USART_PARITY_NONE) + { + husart->pTxBuffPtr += 2; + } + else + { + husart->pTxBuffPtr += 1; + } + } + else + { + WRITE_REG(husart->Instance->DR, (uint8_t)(*husart->pTxBuffPtr++ & (uint8_t)0x00FF)); + } + + if(--husart->TxXferCount == 0) + { + /* Disable the USART Transmit data register empty Interrupt */ + __HAL_USART_DISABLE_IT(husart, USART_IT_TXE); + + /* Enable the USART Transmit Complete Interrupt */ + __HAL_USART_ENABLE_IT(husart, USART_IT_TC); + } + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + + +/** + * @brief Wraps up transmission in non blocking mode. + * @param husart: pointer to a USART_HandleTypeDef structure that contains + * the configuration information for the specified USART module. + * @retval HAL status + */ +static HAL_StatusTypeDef USART_EndTransmit_IT(USART_HandleTypeDef *husart) +{ + /* Disable the USART Transmit Complete Interrupt */ + __HAL_USART_DISABLE_IT(husart, USART_IT_TC); + + /* Disable the USART Error Interrupt: (Frame error, noise error, overrun error) */ + __HAL_USART_DISABLE_IT(husart, USART_IT_ERR); + + husart->State = HAL_USART_STATE_READY; + + HAL_USART_TxCpltCallback(husart); + + return HAL_OK; +} + + +/** + * @brief Simplex Receive an amount of data in non-blocking mode. + * @param husart: Pointer to a USART_HandleTypeDef structure that contains + * the configuration information for the specified USART module. + * @retval HAL status + */ +static HAL_StatusTypeDef USART_Receive_IT(USART_HandleTypeDef *husart) +{ + uint16_t* tmp=0; + if(husart->State == HAL_USART_STATE_BUSY_RX) + { + if(husart->Init.WordLength == USART_WORDLENGTH_9B) + { + tmp = (uint16_t*) husart->pRxBuffPtr; + if(husart->Init.Parity == USART_PARITY_NONE) + { + *tmp = (uint16_t)(husart->Instance->DR & (uint16_t)0x01FF); + husart->pRxBuffPtr += 2; + } + else + { + *tmp = (uint16_t)(husart->Instance->DR & (uint16_t)0x00FF); + husart->pRxBuffPtr += 1; + } + if(--husart->RxXferCount != 0x00) + { + /* Send dummy byte in order to generate the clock for the slave to send the next data */ + WRITE_REG(husart->Instance->DR, (DUMMY_DATA & (uint16_t)0x01FF)); + } + } + else + { + if(husart->Init.Parity == USART_PARITY_NONE) + { + *husart->pRxBuffPtr++ = (uint8_t)(husart->Instance->DR & (uint8_t)0x00FF); + } + else + { + *husart->pRxBuffPtr++ = (uint8_t)(husart->Instance->DR & (uint8_t)0x007F); + } + + if(--husart->RxXferCount != 0x00) + { + /* Send dummy byte in order to generate the clock for the slave to send the next data */ + WRITE_REG(husart->Instance->DR, (DUMMY_DATA & (uint16_t)0x00FF)); + } + } + + if(husart->RxXferCount == 0) + { + /* Disable the USART RXNE Interrupt */ + __HAL_USART_DISABLE_IT(husart, USART_IT_RXNE); + + /* Disable the USART Parity Error Interrupt */ + __HAL_USART_DISABLE_IT(husart, USART_IT_PE); + + /* Disable the USART Error Interrupt: (Frame error, noise error, overrun error) */ + __HAL_USART_DISABLE_IT(husart, USART_IT_ERR); + + husart->State = HAL_USART_STATE_READY; + HAL_USART_RxCpltCallback(husart); + + return HAL_OK; + } + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Full-Duplex Send receive an amount of data in full-duplex mode (non-blocking). + * @param husart: Pointer to a USART_HandleTypeDef structure that contains + * the configuration information for the specified USART module. + * @retval HAL status + */ +static HAL_StatusTypeDef USART_TransmitReceive_IT(USART_HandleTypeDef *husart) +{ + uint16_t* tmp=0; + + if(husart->State == HAL_USART_STATE_BUSY_TX_RX) + { + if(husart->TxXferCount != 0x00) + { + if(__HAL_USART_GET_FLAG(husart, USART_FLAG_TXE) != RESET) + { + if(husart->Init.WordLength == USART_WORDLENGTH_9B) + { + tmp = (uint16_t*) husart->pTxBuffPtr; + WRITE_REG(husart->Instance->DR, (uint16_t)(*tmp & (uint16_t)0x01FF)); + if(husart->Init.Parity == USART_PARITY_NONE) + { + husart->pTxBuffPtr += 2; + } + else + { + husart->pTxBuffPtr += 1; + } + } + else + { + WRITE_REG(husart->Instance->DR, (uint8_t)(*husart->pTxBuffPtr++ & (uint8_t)0x00FF)); + } + husart->TxXferCount--; + + /* Check the latest data transmitted */ + if(husart->TxXferCount == 0) + { + __HAL_USART_DISABLE_IT(husart, USART_IT_TXE); + } + } + } + + if(husart->RxXferCount != 0x00) + { + if(__HAL_USART_GET_FLAG(husart, USART_FLAG_RXNE) != RESET) + { + if(husart->Init.WordLength == USART_WORDLENGTH_9B) + { + tmp = (uint16_t*) husart->pRxBuffPtr; + if(husart->Init.Parity == USART_PARITY_NONE) + { + *tmp = (uint16_t)(husart->Instance->DR & (uint16_t)0x01FF); + husart->pRxBuffPtr += 2; + } + else + { + *tmp = (uint16_t)(husart->Instance->DR & (uint16_t)0x00FF); + husart->pRxBuffPtr += 1; + } + } + else + { + if(husart->Init.Parity == USART_PARITY_NONE) + { + *husart->pRxBuffPtr++ = (uint8_t)(husart->Instance->DR & (uint8_t)0x00FF); + } + else + { + *husart->pRxBuffPtr++ = (uint8_t)(husart->Instance->DR & (uint8_t)0x007F); + } + } + husart->RxXferCount--; + } + } + + /* Check the latest data received */ + if(husart->RxXferCount == 0) + { + __HAL_USART_DISABLE_IT(husart, USART_IT_RXNE); + + /* Disable the USART Parity Error Interrupt */ + __HAL_USART_DISABLE_IT(husart, USART_IT_PE); + + /* Disable the USART Error Interrupt: (Frame error, noise error, overrun error) */ + __HAL_USART_DISABLE_IT(husart, USART_IT_ERR); + + husart->State = HAL_USART_STATE_READY; + + HAL_USART_TxRxCpltCallback(husart); + + return HAL_OK; + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Configures the USART peripheral. + * @param husart: Pointer to a USART_HandleTypeDef structure that contains + * the configuration information for the specified USART module. + * @retval None + */ +static void USART_SetConfig(USART_HandleTypeDef *husart) +{ + /* Check the parameters */ + assert_param(IS_USART_POLARITY(husart->Init.CLKPolarity)); + assert_param(IS_USART_PHASE(husart->Init.CLKPhase)); + assert_param(IS_USART_LASTBIT(husart->Init.CLKLastBit)); + assert_param(IS_USART_BAUDRATE(husart->Init.BaudRate)); + assert_param(IS_USART_WORD_LENGTH(husart->Init.WordLength)); + assert_param(IS_USART_STOPBITS(husart->Init.StopBits)); + assert_param(IS_USART_PARITY(husart->Init.Parity)); + assert_param(IS_USART_MODE(husart->Init.Mode)); + + /* The LBCL, CPOL and CPHA bits have to be selected when both the transmitter and the + receiver are disabled (TE=RE=0) to ensure that the clock pulses function correctly. */ + CLEAR_BIT(husart->Instance->CR1, ((uint32_t)(USART_CR1_TE | USART_CR1_RE))); + + /*---------------------------- USART CR2 Configuration ---------------------*/ + /* Configure the USART Clock, CPOL, CPHA and LastBit -----------------------*/ + /* Set CPOL bit according to husart->Init.CLKPolarity value */ + /* Set CPHA bit according to husart->Init.CLKPhase value */ + /* Set LBCL bit according to husart->Init.CLKLastBit value */ + /* Set Stop Bits: Set STOP[13:12] bits according to husart->Init.StopBits value */ + /* Write to USART CR2 */ + MODIFY_REG(husart->Instance->CR2, + (uint32_t)(USART_CR2_CPHA | USART_CR2_CPOL | USART_CR2_CLKEN | USART_CR2_LBCL | USART_CR2_STOP), + ((uint32_t)(USART_CLOCK_ENABLE| husart->Init.CLKPolarity | husart->Init.CLKPhase| husart->Init.CLKLastBit | husart->Init.StopBits))); + + /*-------------------------- USART CR1 Configuration -----------------------*/ + /* Configure the USART Word Length, Parity and mode: + Set the M bits according to husart->Init.WordLength value + Set PCE and PS bits according to husart->Init.Parity value + Set TE and RE bits according to husart->Init.Mode value + Force OVER8 bit to 1 in order to reach the max USART frequencies */ + MODIFY_REG(husart->Instance->CR1, + (uint32_t)(USART_CR1_M | USART_CR1_PCE | USART_CR1_PS | USART_CR1_TE | USART_CR1_RE | USART_CR1_OVER8), + (uint32_t)husart->Init.WordLength | husart->Init.Parity | husart->Init.Mode | USART_CR1_OVER8); + + /*-------------------------- USART CR3 Configuration -----------------------*/ + /* Clear CTSE and RTSE bits */ + CLEAR_BIT(husart->Instance->CR3, (uint32_t)(USART_CR3_RTSE | USART_CR3_CTSE)); + + /*-------------------------- USART BRR Configuration -----------------------*/ + if((husart->Instance == USART1)) + { + husart->Instance->BRR = USART_BRR(HAL_RCC_GetPCLK2Freq(), husart->Init.BaudRate); + } + else + { + husart->Instance->BRR = USART_BRR(HAL_RCC_GetPCLK1Freq(), husart->Init.BaudRate); + } +} + +/** + * @} + */ + +#endif /* HAL_USART_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_wwdg.c b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_wwdg.c new file mode 100755 index 0000000..78b4af9 --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_wwdg.c @@ -0,0 +1,322 @@ +/** + ****************************************************************************** + * @file stm32l1xx_hal_wwdg.c + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief WWDG HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Window Watchdog (WWDG) peripheral: + * + Initialization and Configuration function + * + IO operation functions + @verbatim + ============================================================================== + ##### WWDG specific features ##### + ============================================================================== + [..] + Once enabled the WWDG generates a system reset on expiry of a programmed + time period, unless the program refreshes the counter (T[6;0] downcounter) + before reaching 0x3F value (i.e. a reset is generated when the counter + value rolls over from 0x40 to 0x3F). + + (+) An MCU reset is also generated if the counter value is refreshed + before the counter has reached the refresh window value. This + implies that the counter must be refreshed in a limited window. + + (+) Once enabled the WWDG cannot be disabled except by a system reset. + + (+) WWDGRST flag in RCC_CSR register informs when a WWDG reset has + occurred (check available with __HAL_RCC_GET_FLAG(RCC_FLAG_WWDGRST)). + + (+) The WWDG downcounter input clock is derived from the APB clock divided + by a programmable prescaler. + + (+) WWDG downcounter clock (Hz) = PCLK1 / (4096 * Prescaler) + + (+) WWDG timeout (ms) = (1000 * (T[5;0] + 1)) / (WWDG downcounter clock) + where T[5;0] are the lowest 6 bits of downcounter. + + (+) WWDG Counter refresh is allowed between the following limits : + (++) min time (ms) = (1000 * (T[5;0] - Window)) / (WWDG downcounter clock) + (++) max time (ms) = (1000 * (T[5;0] - 0x40)) / (WWDG downcounter clock) + + (+) Min-max timeout value @80 MHz(PCLK1): ~51.2 us / ~26.22 ms + + (+) The Early Wakeup Interrupt (EWI) can be used if specific safety + operations or data logging must be performed before the actual reset is + generated. When the downcounter reaches the value 0x40, an EWI interrupt + is generated and the corresponding interrupt service routine (ISR) can + be used to trigger specific actions (such as communications or data + logging), before resetting the device. + In some applications, the EWI interrupt can be used to manage a software + system check and/or system recovery/graceful degradation, without + generating a WWDG reset. In this case, the corresponding interrupt + service routine (ISR) should reload the WWDG counter to avoid the WWDG + reset, then trigger the required actions. + Note:When the EWI interrupt cannot be served, e.g. due to a system lock + in a higher priority task, the WWDG reset will eventually be generated. + + (+) Debug mode : When the microcontroller enters debug mode (core halted), + the WWDG counter either continues to work normally or stops, depending + on DBG_WWDG_STOP configuration bit in DBG module, accessible through + __HAL_DBGMCU_FREEZE_WWDG() and __HAL_DBGMCU_UNFREEZE_WWDG() macros + + ##### How to use this driver ##### + ============================================================================== + [..] + (+) Enable WWDG APB1 clock using __HAL_RCC_WWDG_CLK_ENABLE(). + + (+) Set the WWDG prescaler, refresh window, counter value and Early Wakeup + Interrupt mode using using HAL_WWDG_Init() function. + This enables WWDG peripheral and the downcounter starts downcounting + from given counter value. + Init function can be called again to modify all watchdog parameters, + however if EWI mode has been set once, it can't be clear until next + reset. + + (+) The application program must refresh the WWDG counter at regular + intervals during normal operation to prevent an MCU reset using + HAL_WWDG_Refresh() function. This operation must occur only when + the counter is lower than the window value already programmed. + + (+) if Early Wakeup Interrupt mode is enable an interrupt is generated when + the counter reaches 0x40. User can add his own code in weak function + HAL_WWDG_EarlyWakeupCallback(). + + *** WWDG HAL driver macros list *** + ================================== + [..] + Below the list of most used macros in WWDG HAL driver. + + (+) __HAL_WWDG_GET_IT_SOURCE: Check the selected WWDG's interrupt source. + (+) __HAL_WWDG_GET_FLAG: Get the selected WWDG's flag status. + (+) __HAL_WWDG_CLEAR_FLAG: Clear the WWDG's pending flags. + + @endverbatim + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_hal.h" + +/** @addtogroup STM32L1xx_HAL_Driver + * @{ + */ + +#ifdef HAL_WWDG_MODULE_ENABLED +/** @defgroup WWDG WWDG + * @brief WWDG HAL module driver. + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup WWDG_Exported_Functions WWDG Exported Functions + * @{ + */ + +/** @defgroup WWDG_Exported_Functions_Group1 Initialization and Configuration functions + * @brief Initialization and Configuration functions. + * +@verbatim + ============================================================================== + ##### Initialization and Configuration functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and start the WWDG according to the specified parameters + in the WWDG_InitTypeDef of associated handle. + (+) Initialize the WWDG MSP. + +@endverbatim + * @{ + */ + +/** + * @brief Initialize the WWDG according to the specified. + * parameters in the WWDG_InitTypeDef of associated handle. + * @param hwwdg pointer to a WWDG_HandleTypeDef structure that contains + * the configuration information for the specified WWDG module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_WWDG_Init(WWDG_HandleTypeDef *hwwdg) +{ + /* Check the WWDG handle allocation */ + if(hwwdg == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_WWDG_ALL_INSTANCE(hwwdg->Instance)); + assert_param(IS_WWDG_PRESCALER(hwwdg->Init.Prescaler)); + assert_param(IS_WWDG_WINDOW(hwwdg->Init.Window)); + assert_param(IS_WWDG_COUNTER(hwwdg->Init.Counter)); + assert_param(IS_WWDG_EWI_MODE(hwwdg->Init.EWIMode)); + + /* Init the low level hardware */ + HAL_WWDG_MspInit(hwwdg); + + /* Set WWDG Counter */ + WRITE_REG(hwwdg->Instance->CR, (WWDG_CR_WDGA | hwwdg->Init.Counter)); + + /* Set WWDG Prescaler and Window */ + WRITE_REG(hwwdg->Instance->CFR, (hwwdg->Init.EWIMode | hwwdg->Init.Prescaler | hwwdg->Init.Window)); + + /* Return function status */ + return HAL_OK; +} + + +/** + * @brief Initialize the WWDG MSP. + * @param hwwdg pointer to a WWDG_HandleTypeDef structure that contains + * the configuration information for the specified WWDG module. + * @note When rewriting this function in user file, mechanism may be added + * to avoid multiple initialize when HAL_WWDG_Init function is called + * again to change parameters. + * @retval None + */ +__weak void HAL_WWDG_MspInit(WWDG_HandleTypeDef *hwwdg) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hwwdg); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_WWDG_MspInit could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup WWDG_Exported_Functions_Group2 IO operation functions + * @brief IO operation functions + * +@verbatim + ============================================================================== + ##### IO operation functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Refresh the WWDG. + (+) Handle WWDG interrupt request and associated function callback. + +@endverbatim + * @{ + */ + +/** + * @brief Refresh the WWDG. + * @param hwwdg pointer to a WWDG_HandleTypeDef structure that contains + * the configuration information for the specified WWDG module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_WWDG_Refresh(WWDG_HandleTypeDef *hwwdg) +{ + /* Write to WWDG CR the WWDG Counter value to refresh with */ + WRITE_REG(hwwdg->Instance->CR, (hwwdg->Init.Counter)); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Handle WWDG interrupt request. + * @note The Early Wakeup Interrupt (EWI) can be used if specific safety operations + * or data logging must be performed before the actual reset is generated. + * The EWI interrupt is enabled by calling HAL_WWDG_Init function with + * EWIMode set to WWDG_EWI_ENABLE. + * When the downcounter reaches the value 0x40, and EWI interrupt is + * generated and the corresponding Interrupt Service Routine (ISR) can + * be used to trigger specific actions (such as communications or data + * logging), before resetting the device. + * @param hwwdg pointer to a WWDG_HandleTypeDef structure that contains + * the configuration information for the specified WWDG module. + * @retval None + */ +void HAL_WWDG_IRQHandler(WWDG_HandleTypeDef *hwwdg) +{ + /* Check if Early Wakeup Interrupt is enable */ + if(__HAL_WWDG_GET_IT_SOURCE(hwwdg, WWDG_IT_EWI) != RESET) + { + /* Check if WWDG Early Wakeup Interrupt occurred */ + if(__HAL_WWDG_GET_FLAG(hwwdg, WWDG_FLAG_EWIF) != RESET) + { + /* Clear the WWDG Early Wakeup flag */ + __HAL_WWDG_CLEAR_FLAG(hwwdg, WWDG_FLAG_EWIF); + + /* Early Wakeup callback */ + HAL_WWDG_EarlyWakeupCallback(hwwdg); + } + } +} + + +/** + * @brief WWDG Early Wakeup callback. + * @param hwwdg pointer to a WWDG_HandleTypeDef structure that contains + * the configuration information for the specified WWDG module. + * @retval None + */ +__weak void HAL_WWDG_EarlyWakeupCallback(WWDG_HandleTypeDef* hwwdg) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hwwdg); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_WWDG_EarlyWakeupCallback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_WWDG_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_ll_adc.c b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_ll_adc.c new file mode 100755 index 0000000..41326bd --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_ll_adc.c @@ -0,0 +1,896 @@ +/** + ****************************************************************************** + * @file stm32l1xx_ll_adc.c + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief ADC LL module driver + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ +#if defined(USE_FULL_LL_DRIVER) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_ll_adc.h" +#include "stm32l1xx_ll_bus.h" + +#ifdef USE_FULL_ASSERT + #include "stm32_assert.h" +#else + #define assert_param(expr) ((void)0U) +#endif + +/** @addtogroup STM32L1xx_LL_Driver + * @{ + */ + +#if defined (ADC1) + +/** @addtogroup ADC_LL ADC + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ + +/** @addtogroup ADC_LL_Private_Macros + * @{ + */ + +/* Check of parameters for configuration of ADC hierarchical scope: */ +/* common to several ADC instances. */ +#define IS_LL_ADC_COMMON_CLOCK(__CLOCK__) \ + ( ((__CLOCK__) == LL_ADC_CLOCK_ASYNC_DIV1) \ + || ((__CLOCK__) == LL_ADC_CLOCK_ASYNC_DIV2) \ + || ((__CLOCK__) == LL_ADC_CLOCK_ASYNC_DIV4) \ + ) + +/* Check of parameters for configuration of ADC hierarchical scope: */ +/* ADC instance. */ +#define IS_LL_ADC_RESOLUTION(__RESOLUTION__) \ + ( ((__RESOLUTION__) == LL_ADC_RESOLUTION_12B) \ + || ((__RESOLUTION__) == LL_ADC_RESOLUTION_10B) \ + || ((__RESOLUTION__) == LL_ADC_RESOLUTION_8B) \ + || ((__RESOLUTION__) == LL_ADC_RESOLUTION_6B) \ + ) + +#define IS_LL_ADC_DATA_ALIGN(__DATA_ALIGN__) \ + ( ((__DATA_ALIGN__) == LL_ADC_DATA_ALIGN_RIGHT) \ + || ((__DATA_ALIGN__) == LL_ADC_DATA_ALIGN_LEFT) \ + ) + +#define IS_LL_ADC_LOW_POWER_AUTOWAIT(__LOW_POWER__) \ + ( ((__LOW_POWER__) == LL_ADC_LP_AUTOWAIT_NONE) \ + || ((__LOW_POWER__) == LL_ADC_LP_AUTOWAIT) \ + || ((__LOW_POWER__) == LL_ADC_LP_AUTOWAIT_7_APBCLOCKCYCLES) \ + || ((__LOW_POWER__) == LL_ADC_LP_AUTOWAIT_15_APBCLOCKCYCLES) \ + || ((__LOW_POWER__) == LL_ADC_LP_AUTOWAIT_31_APBCLOCKCYCLES) \ + || ((__LOW_POWER__) == LL_ADC_LP_AUTOWAIT_63_APBCLOCKCYCLES) \ + || ((__LOW_POWER__) == LL_ADC_LP_AUTOWAIT_127_APBCLOCKCYCLES) \ + || ((__LOW_POWER__) == LL_ADC_LP_AUTOWAIT_255_APBCLOCKCYCLES) \ + ) + +#define IS_LL_ADC_LOW_POWER_AUTOPOWEROFF(__LOW_POWER__) \ + ( ((__LOW_POWER__) == LL_ADC_LP_AUTOPOWEROFF_NONE) \ + || ((__LOW_POWER__) == LL_ADC_LP_AUTOPOWEROFF_IDLE_PHASE) \ + || ((__LOW_POWER__) == LL_ADC_LP_AUTOPOWEROFF_AUTOWAIT_PHASE) \ + || ((__LOW_POWER__) == LL_ADC_LP_AUTOPOWEROFF_IDLE_AUTOWAIT_PHASES) \ + ) + +#define IS_LL_ADC_SCAN_SELECTION(__SCAN_SELECTION__) \ + ( ((__SCAN_SELECTION__) == LL_ADC_SEQ_SCAN_DISABLE) \ + || ((__SCAN_SELECTION__) == LL_ADC_SEQ_SCAN_ENABLE) \ + ) + +#define IS_LL_ADC_SEQ_SCAN_MODE(__SEQ_SCAN_MODE__) \ + ( ((__SCAN_MODE__) == LL_ADC_SEQ_SCAN_DISABLE) \ + || ((__SCAN_MODE__) == LL_ADC_SEQ_SCAN_ENABLE) \ + ) + +#define IS_LL_ADC_CHANNELS_BANK(__CHANNELS_BANK__) \ + ( ((__CHANNELS_BANK__) == LL_ADC_CHANNELS_BANK_A) \ + || ((__CHANNELS_BANK__) == LL_ADC_CHANNELS_BANK_B) \ + ) + +/* Check of parameters for configuration of ADC hierarchical scope: */ +/* ADC group regular */ +#define IS_LL_ADC_REG_TRIG_SOURCE(__REG_TRIG_SOURCE__) \ + ( ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_SOFTWARE) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM2_TRGO) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM2_CH3) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM3_TRGO) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM2_CH2) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM3_CH1) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM3_CH3) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM4_TRGO) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM4_CH4) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM6_TRGO) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM9_CH2) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM9_TRGO) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_EXTI_LINE11) \ + ) + +#define IS_LL_ADC_REG_CONTINUOUS_MODE(__REG_CONTINUOUS_MODE__) \ + ( ((__REG_CONTINUOUS_MODE__) == LL_ADC_REG_CONV_SINGLE) \ + || ((__REG_CONTINUOUS_MODE__) == LL_ADC_REG_CONV_CONTINUOUS) \ + ) + +#define IS_LL_ADC_REG_DMA_TRANSFER(__REG_DMA_TRANSFER__) \ + ( ((__REG_DMA_TRANSFER__) == LL_ADC_REG_DMA_TRANSFER_NONE) \ + || ((__REG_DMA_TRANSFER__) == LL_ADC_REG_DMA_TRANSFER_LIMITED) \ + || ((__REG_DMA_TRANSFER__) == LL_ADC_REG_DMA_TRANSFER_UNLIMITED) \ + ) + +#define IS_LL_ADC_REG_FLAG_EOC_SELECTION(__REG_FLAG_EOC_SELECTION__) \ + ( ((__REG_FLAG_EOC_SELECTION__) == LL_ADC_REG_FLAG_EOC_SEQUENCE_CONV) \ + || ((__REG_FLAG_EOC_SELECTION__) == LL_ADC_REG_FLAG_EOC_UNITARY_CONV) \ + ) + +#define IS_LL_ADC_REG_SEQ_SCAN_LENGTH(__REG_SEQ_SCAN_LENGTH__) \ + ( ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_DISABLE) \ + || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_2RANKS) \ + || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_3RANKS) \ + || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_4RANKS) \ + || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_5RANKS) \ + || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_6RANKS) \ + || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_7RANKS) \ + || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_8RANKS) \ + || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_9RANKS) \ + || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_10RANKS) \ + || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_11RANKS) \ + || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_12RANKS) \ + || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_13RANKS) \ + || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_14RANKS) \ + || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_15RANKS) \ + || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_16RANKS) \ + ) + +#define IS_LL_ADC_REG_SEQ_SCAN_DISCONT_MODE(__REG_SEQ_DISCONT_MODE__) \ + ( ((__REG_SEQ_DISCONT_MODE__) == LL_ADC_REG_SEQ_DISCONT_DISABLE) \ + || ((__REG_SEQ_DISCONT_MODE__) == LL_ADC_REG_SEQ_DISCONT_1RANK) \ + || ((__REG_SEQ_DISCONT_MODE__) == LL_ADC_REG_SEQ_DISCONT_2RANKS) \ + || ((__REG_SEQ_DISCONT_MODE__) == LL_ADC_REG_SEQ_DISCONT_3RANKS) \ + || ((__REG_SEQ_DISCONT_MODE__) == LL_ADC_REG_SEQ_DISCONT_4RANKS) \ + || ((__REG_SEQ_DISCONT_MODE__) == LL_ADC_REG_SEQ_DISCONT_5RANKS) \ + || ((__REG_SEQ_DISCONT_MODE__) == LL_ADC_REG_SEQ_DISCONT_6RANKS) \ + || ((__REG_SEQ_DISCONT_MODE__) == LL_ADC_REG_SEQ_DISCONT_7RANKS) \ + || ((__REG_SEQ_DISCONT_MODE__) == LL_ADC_REG_SEQ_DISCONT_8RANKS) \ + ) + +/* Check of parameters for configuration of ADC hierarchical scope: */ +/* ADC group injected */ +#define IS_LL_ADC_INJ_TRIG_SOURCE(__INJ_TRIG_SOURCE__) \ + ( ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_SOFTWARE) \ + || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM9_CH1) \ + || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM9_TRGO) \ + || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM2_TRGO) \ + || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM2_CH1) \ + || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM3_CH4) \ + || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM4_TRGO) \ + || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM4_CH1) \ + || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM4_CH2) \ + || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM4_CH3) \ + || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM10_CH1) \ + || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM7_TRGO) \ + || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_EXTI_LINE15) \ + ) + +#define IS_LL_ADC_INJ_TRIG_EXT_EDGE(__INJ_TRIG_EXT_EDGE__) \ + ( ((__INJ_TRIG_EXT_EDGE__) == LL_ADC_INJ_TRIG_EXT_RISING) \ + || ((__INJ_TRIG_EXT_EDGE__) == LL_ADC_INJ_TRIG_EXT_FALLING) \ + || ((__INJ_TRIG_EXT_EDGE__) == LL_ADC_INJ_TRIG_EXT_RISINGFALLING) \ + ) + +#define IS_LL_ADC_INJ_TRIG_AUTO(__INJ_TRIG_AUTO__) \ + ( ((__INJ_TRIG_AUTO__) == LL_ADC_INJ_TRIG_INDEPENDENT) \ + || ((__INJ_TRIG_AUTO__) == LL_ADC_INJ_TRIG_FROM_GRP_REGULAR) \ + ) + +#define IS_LL_ADC_INJ_SEQ_SCAN_LENGTH(__INJ_SEQ_SCAN_LENGTH__) \ + ( ((__INJ_SEQ_SCAN_LENGTH__) == LL_ADC_INJ_SEQ_SCAN_DISABLE) \ + || ((__INJ_SEQ_SCAN_LENGTH__) == LL_ADC_INJ_SEQ_SCAN_ENABLE_2RANKS) \ + || ((__INJ_SEQ_SCAN_LENGTH__) == LL_ADC_INJ_SEQ_SCAN_ENABLE_3RANKS) \ + || ((__INJ_SEQ_SCAN_LENGTH__) == LL_ADC_INJ_SEQ_SCAN_ENABLE_4RANKS) \ + ) + +#define IS_LL_ADC_INJ_SEQ_SCAN_DISCONT_MODE(__INJ_SEQ_DISCONT_MODE__) \ + ( ((__INJ_SEQ_DISCONT_MODE__) == LL_ADC_INJ_SEQ_DISCONT_DISABLE) \ + || ((__INJ_SEQ_DISCONT_MODE__) == LL_ADC_INJ_SEQ_DISCONT_1RANK) \ + ) + +/** + * @} + */ + + +/* Private function prototypes -----------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup ADC_LL_Exported_Functions + * @{ + */ + +/** @addtogroup ADC_LL_EF_Init + * @{ + */ + +/** + * @brief De-initialize registers of all ADC instances belonging to + * the same ADC common instance to their default reset values. + * @param ADCxy_COMMON ADC common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) + * @retval An ErrorStatus enumeration value: + * - SUCCESS: ADC common registers are de-initialized + * - ERROR: not applicable + */ +ErrorStatus LL_ADC_CommonDeInit(ADC_Common_TypeDef *ADCxy_COMMON) +{ + /* Check the parameters */ + assert_param(IS_ADC_COMMON_INSTANCE(ADCxy_COMMON)); + + /* Force reset of ADC clock (core clock) */ + LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_ADC1); + + /* Release reset of ADC clock (core clock) */ + LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_ADC1); + + return SUCCESS; +} + +/** + * @brief Initialize some features of ADC common parameters + * (all ADC instances belonging to the same ADC common instance) + * and multimode (for devices with several ADC instances available). + * @note The setting of ADC common parameters is conditioned to + * ADC instances state: + * All ADC instances belonging to the same ADC common instance + * must be disabled. + * @param ADCxy_COMMON ADC common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) + * @param ADC_CommonInitStruct Pointer to a @ref LL_ADC_CommonInitTypeDef structure + * @retval An ErrorStatus enumeration value: + * - SUCCESS: ADC common registers are initialized + * - ERROR: ADC common registers are not initialized + */ +ErrorStatus LL_ADC_CommonInit(ADC_Common_TypeDef *ADCxy_COMMON, LL_ADC_CommonInitTypeDef *ADC_CommonInitStruct) +{ + ErrorStatus status = SUCCESS; + + /* Check the parameters */ + assert_param(IS_ADC_COMMON_INSTANCE(ADCxy_COMMON)); + assert_param(IS_LL_ADC_COMMON_CLOCK(ADC_CommonInitStruct->CommonClock)); + + /* Note: Hardware constraint (refer to description of functions */ + /* "LL_ADC_SetCommonXXX()": */ + /* On this STM32 serie, setting of these features is conditioned to */ + /* ADC state: */ + /* All ADC instances of the ADC common group must be disabled. */ + if(__LL_ADC_IS_ENABLED_ALL_COMMON_INSTANCE(ADCxy_COMMON) == 0U) + { + /* Configuration of ADC hierarchical scope: */ + /* - common to several ADC */ + /* (all ADC instances belonging to the same ADC common instance) */ + /* - Set ADC clock (conversion clock) */ + LL_ADC_SetCommonClock(ADCxy_COMMON, ADC_CommonInitStruct->CommonClock); + } + else + { + /* Initialization error: One or several ADC instances belonging to */ + /* the same ADC common instance are not disabled. */ + status = ERROR; + } + + return status; +} + +/** + * @brief Set each @ref LL_ADC_CommonInitTypeDef field to default value. + * @param ADC_CommonInitStruct Pointer to a @ref LL_ADC_CommonInitTypeDef structure + * whose fields will be set to default values. + * @retval None + */ +void LL_ADC_CommonStructInit(LL_ADC_CommonInitTypeDef *ADC_CommonInitStruct) +{ + /* Set ADC_CommonInitStruct fields to default values */ + /* Set fields of ADC common */ + /* (all ADC instances belonging to the same ADC common instance) */ + ADC_CommonInitStruct->CommonClock = LL_ADC_CLOCK_ASYNC_DIV2; + +} + +/** + * @brief De-initialize registers of the selected ADC instance + * to their default reset values. + * @note To reset all ADC instances quickly (perform a hard reset), + * use function @ref LL_ADC_CommonDeInit(). + * @param ADCx ADC instance + * @retval An ErrorStatus enumeration value: + * - SUCCESS: ADC registers are de-initialized + * - ERROR: ADC registers are not de-initialized + */ +ErrorStatus LL_ADC_DeInit(ADC_TypeDef *ADCx) +{ + ErrorStatus status = SUCCESS; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(ADCx)); + + /* Disable ADC instance if not already disabled. */ + if(LL_ADC_IsEnabled(ADCx) == 1U) + { + /* Set ADC group regular trigger source to SW start to ensure to not */ + /* have an external trigger event occurring during the conversion stop */ + /* ADC disable process. */ + LL_ADC_REG_SetTriggerSource(ADCx, LL_ADC_REG_TRIG_SOFTWARE); + + /* Set ADC group injected trigger source to SW start to ensure to not */ + /* have an external trigger event occurring during the conversion stop */ + /* ADC disable process. */ + LL_ADC_INJ_SetTriggerSource(ADCx, LL_ADC_INJ_TRIG_SOFTWARE); + + /* Disable the ADC instance */ + LL_ADC_Disable(ADCx); + } + + /* Check whether ADC state is compliant with expected state */ + /* (hardware requirements of bits state to reset registers below) */ + if(READ_BIT(ADCx->CR2, ADC_CR2_ADON) == 0U) + { + /* ========== Reset ADC registers ========== */ + /* Reset register SR */ + CLEAR_BIT(ADCx->SR, + ( LL_ADC_FLAG_STRT + | LL_ADC_FLAG_JSTRT + | LL_ADC_FLAG_EOCS + | LL_ADC_FLAG_OVR + | LL_ADC_FLAG_JEOS + | LL_ADC_FLAG_AWD1 ) + ); + + /* Reset register CR1 */ + CLEAR_BIT(ADCx->CR1, + ( ADC_CR1_OVRIE | ADC_CR1_RES | ADC_CR1_AWDEN + | ADC_CR1_JAWDEN | ADC_CR1_PDI | ADC_CR1_PDD + | ADC_CR1_DISCNUM | ADC_CR1_JDISCEN | ADC_CR1_DISCEN + | ADC_CR1_JAUTO | ADC_CR1_AWDSGL | ADC_CR1_SCAN + | ADC_CR1_JEOCIE | ADC_CR1_AWDIE | ADC_CR1_EOCIE + | ADC_CR1_AWDCH ) + ); + + /* Reset register CR2 */ + #if defined(ADC_CR2_CFG) + CLEAR_BIT(ADCx->CR2, + ( ADC_CR2_SWSTART | ADC_CR2_EXTEN | ADC_CR2_EXTSEL + | ADC_CR2_JSWSTART | ADC_CR2_JEXTEN | ADC_CR2_JEXTSEL + | ADC_CR2_ALIGN | ADC_CR2_EOCS + | ADC_CR2_DDS | ADC_CR2_DMA | ADC_CR2_DELS + | ADC_CR2_CFG | ADC_CR2_CONT | ADC_CR2_ADON ) + ); + #else + CLEAR_BIT(ADCx->CR2, + ( ADC_CR2_SWSTART | ADC_CR2_EXTEN | ADC_CR2_EXTSEL + | ADC_CR2_JSWSTART | ADC_CR2_JEXTEN | ADC_CR2_JEXTSEL + | ADC_CR2_ALIGN | ADC_CR2_EOCS + | ADC_CR2_DDS | ADC_CR2_DMA | ADC_CR2_DELS + | ADC_CR2_CONT | ADC_CR2_ADON ) + ); + #endif /* ADC_CR2_CFG */ + + /* Reset register SMPR1 */ + /* Note: On STM32L1, ADC channels 27, 28, 29, 30, 31 are not available */ + /* on all devices: only on STM32L1 Cat.4 and Cat.5. */ + #if defined(ADC_SMPR0_SMP31) + CLEAR_BIT(ADCx->SMPR1, + ( ADC_SMPR1_SMP29 | ADC_SMPR1_SMP28 | ADC_SMPR1_SMP27 + | ADC_SMPR1_SMP26 | ADC_SMPR1_SMP25 | ADC_SMPR1_SMP24 + | ADC_SMPR1_SMP23 | ADC_SMPR1_SMP22 | ADC_SMPR1_SMP21 + | ADC_SMPR1_SMP20 ) + ); + #else + CLEAR_BIT(ADCx->SMPR1, + ( ADC_SMPR1_SMP26 | ADC_SMPR1_SMP25 | ADC_SMPR1_SMP24 + | ADC_SMPR1_SMP23 | ADC_SMPR1_SMP22 | ADC_SMPR1_SMP21 + | ADC_SMPR1_SMP20 ) + ); + #endif /* ADC_SMPR0_SMP31 */ + + /* Reset register SMPR2 */ + CLEAR_BIT(ADCx->SMPR2, + ( ADC_SMPR2_SMP19 | ADC_SMPR2_SMP18 | ADC_SMPR2_SMP17 + | ADC_SMPR2_SMP16 | ADC_SMPR2_SMP15 | ADC_SMPR2_SMP14 + | ADC_SMPR2_SMP13 | ADC_SMPR2_SMP12 | ADC_SMPR2_SMP11 + | ADC_SMPR2_SMP10 ) + ); + + /* Reset register SMPR3 */ + CLEAR_BIT(ADCx->SMPR3, + ( ADC_SMPR3_SMP9 | ADC_SMPR3_SMP8 | ADC_SMPR3_SMP7 + | ADC_SMPR3_SMP6 | ADC_SMPR3_SMP5 | ADC_SMPR3_SMP4 + | ADC_SMPR3_SMP3 | ADC_SMPR3_SMP2 | ADC_SMPR3_SMP1 + | ADC_SMPR3_SMP0 ) + ); + + #if defined(ADC_SMPR0_SMP31) + /* Reset register SMPR0 */ + CLEAR_BIT(ADCx->SMPR0, (ADC_SMPR0_SMP31 | ADC_SMPR0_SMP30)); + #endif /* ADC_SMPR0_SMP31 */ + + /* Reset register JOFR1 */ + CLEAR_BIT(ADCx->JOFR1, ADC_JOFR1_JOFFSET1); + /* Reset register JOFR2 */ + CLEAR_BIT(ADCx->JOFR2, ADC_JOFR2_JOFFSET2); + /* Reset register JOFR3 */ + CLEAR_BIT(ADCx->JOFR3, ADC_JOFR3_JOFFSET3); + /* Reset register JOFR4 */ + CLEAR_BIT(ADCx->JOFR4, ADC_JOFR4_JOFFSET4); + + /* Reset register HTR */ + SET_BIT(ADCx->HTR, ADC_HTR_HT); + /* Reset register LTR */ + CLEAR_BIT(ADCx->LTR, ADC_LTR_LT); + + /* Reset register SQR1 */ + CLEAR_BIT(ADCx->SQR1, + ( ADC_SQR1_L + #if defined(ADC_SQR1_SQ28) + | ADC_SQR1_SQ28 | ADC_SQR1_SQ27 + #endif + | ADC_SQR1_SQ26 | ADC_SQR1_SQ25) + ); + + /* Reset register SQR2 */ + CLEAR_BIT(ADCx->SQR2, + ( ADC_SQR2_SQ24 | ADC_SQR2_SQ23 | ADC_SQR2_SQ22 + | ADC_SQR2_SQ21 | ADC_SQR2_SQ20 | ADC_SQR2_SQ19) + ); + + /* Reset register SQR3 */ + CLEAR_BIT(ADCx->SQR3, + ( ADC_SQR3_SQ18 | ADC_SQR3_SQ17 | ADC_SQR3_SQ16 + | ADC_SQR3_SQ15 | ADC_SQR3_SQ14 | ADC_SQR3_SQ13) + ); + + /* Reset register SQR4 */ + CLEAR_BIT(ADCx->SQR4, + ( ADC_SQR4_SQ12 | ADC_SQR4_SQ11 | ADC_SQR4_SQ10 + | ADC_SQR4_SQ9 | ADC_SQR4_SQ8 | ADC_SQR4_SQ7 ) + ); + + /* Reset register SQR5 */ + CLEAR_BIT(ADCx->SQR5, + ( ADC_SQR5_SQ6 | ADC_SQR5_SQ5 | ADC_SQR5_SQ4 + | ADC_SQR5_SQ3 | ADC_SQR5_SQ2 | ADC_SQR5_SQ1 ) + ); + + + /* Reset register JSQR */ + CLEAR_BIT(ADCx->JSQR, + ( ADC_JSQR_JL + | ADC_JSQR_JSQ4 | ADC_JSQR_JSQ3 + | ADC_JSQR_JSQ2 | ADC_JSQR_JSQ1 ) + ); + + /* Reset register DR */ + /* bits in access mode read only, no direct reset applicable */ + + /* Reset registers JDR1, JDR2, JDR3, JDR4 */ + /* bits in access mode read only, no direct reset applicable */ + + /* Reset register CCR */ + CLEAR_BIT(ADC->CCR, ADC_CCR_TSVREFE | ADC_CCR_ADCPRE); + } + + return status; +} + +/** + * @brief Initialize some features of ADC instance. + * @note These parameters have an impact on ADC scope: ADC instance. + * Affects both group regular and group injected (availability + * of ADC group injected depends on STM32 families). + * Refer to corresponding unitary functions into + * @ref ADC_LL_EF_Configuration_ADC_Instance . + * @note The setting of these parameters by function @ref LL_ADC_Init() + * is conditioned to ADC state: + * ADC instance must be disabled. + * This condition is applied to all ADC features, for efficiency + * and compatibility over all STM32 families. However, the different + * features can be set under different ADC state conditions + * (setting possible with ADC enabled without conversion on going, + * ADC enabled with conversion on going, ...) + * Each feature can be updated afterwards with a unitary function + * and potentially with ADC in a different state than disabled, + * refer to description of each function for setting + * conditioned to ADC state. + * @note After using this function, some other features must be configured + * using LL unitary functions. + * The minimum configuration remaining to be done is: + * - Set ADC group regular or group injected sequencer: + * map channel on the selected sequencer rank. + * Refer to function @ref LL_ADC_REG_SetSequencerRanks(). + * - Set ADC channel sampling time + * Refer to function LL_ADC_SetChannelSamplingTime(); + * @param ADCx ADC instance + * @param ADC_InitStruct Pointer to a @ref LL_ADC_REG_InitTypeDef structure + * @retval An ErrorStatus enumeration value: + * - SUCCESS: ADC registers are initialized + * - ERROR: ADC registers are not initialized + */ +ErrorStatus LL_ADC_Init(ADC_TypeDef *ADCx, LL_ADC_InitTypeDef *ADC_InitStruct) +{ + ErrorStatus status = SUCCESS; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(ADCx)); + + assert_param(IS_LL_ADC_RESOLUTION(ADC_InitStruct->Resolution)); + assert_param(IS_LL_ADC_DATA_ALIGN(ADC_InitStruct->DataAlignment)); + /* Note: On STM32L1, low power feature is set by concatenating */ + /* values of @ref ADC_LL_EC_LP_MODE_AUTOWAIT */ + /* and @ref ADC_LL_EC_LP_MODE_AUTOPOWEROFF. */ + /* Check of the parameter is done for each of group of values, */ + /* by excluding the other group of values. */ + assert_param(IS_LL_ADC_LOW_POWER_AUTOWAIT(ADC_InitStruct->LowPowerMode & ~(ADC_CR1_PDI | ADC_CR1_PDD))); + assert_param(IS_LL_ADC_LOW_POWER_AUTOPOWEROFF(ADC_InitStruct->LowPowerMode & ~(ADC_CR2_DELS))); + assert_param(IS_LL_ADC_SCAN_SELECTION(ADC_InitStruct->SequencersScanMode)); + + /* Note: Hardware constraint (refer to description of this function): */ + /* ADC instance must be disabled. */ + if(LL_ADC_IsEnabled(ADCx) == 0U) + { + /* Configuration of ADC hierarchical scope: */ + /* - ADC instance */ + /* - Set ADC data resolution */ + /* - Set ADC conversion data alignment */ + /* - Set ADC low power mode */ + MODIFY_REG(ADCx->CR1, + ADC_CR1_RES + | ADC_CR1_PDI + | ADC_CR1_PDD + | ADC_CR1_SCAN + , + ADC_InitStruct->Resolution + | (ADC_InitStruct->LowPowerMode & (ADC_CR1_PDI | ADC_CR1_PDD)) + | ADC_InitStruct->SequencersScanMode + ); + + MODIFY_REG(ADCx->CR2, + ADC_CR2_ALIGN + | ADC_CR2_DELS + , + ADC_InitStruct->DataAlignment + | (ADC_InitStruct->LowPowerMode & ADC_CR2_DELS) + ); + + } + else + { + /* Initialization error: ADC instance is not disabled. */ + status = ERROR; + } + return status; +} + +/** + * @brief Set each @ref LL_ADC_InitTypeDef field to default value. + * @param ADC_InitStruct Pointer to a @ref LL_ADC_InitTypeDef structure + * whose fields will be set to default values. + * @retval None + */ +void LL_ADC_StructInit(LL_ADC_InitTypeDef *ADC_InitStruct) +{ + /* Set ADC_InitStruct fields to default values */ + /* Set fields of ADC instance */ + ADC_InitStruct->Resolution = LL_ADC_RESOLUTION_12B; + ADC_InitStruct->DataAlignment = LL_ADC_DATA_ALIGN_RIGHT; + ADC_InitStruct->LowPowerMode = (LL_ADC_LP_AUTOWAIT_NONE | LL_ADC_LP_AUTOPOWEROFF_NONE); + + /* Enable scan mode to have a generic behavior with ADC of other */ + /* STM32 families, without this setting available: */ + /* ADC group regular sequencer and ADC group injected sequencer depend */ + /* only of their own configuration. */ + ADC_InitStruct->SequencersScanMode = LL_ADC_SEQ_SCAN_ENABLE; + +} + +/** + * @brief Initialize some features of ADC group regular. + * @note These parameters have an impact on ADC scope: ADC group regular. + * Refer to corresponding unitary functions into + * @ref ADC_LL_EF_Configuration_ADC_Group_Regular + * (functions with prefix "REG"). + * @note The setting of these parameters by function @ref LL_ADC_Init() + * is conditioned to ADC state: + * ADC instance must be disabled. + * This condition is applied to all ADC features, for efficiency + * and compatibility over all STM32 families. However, the different + * features can be set under different ADC state conditions + * (setting possible with ADC enabled without conversion on going, + * ADC enabled with conversion on going, ...) + * Each feature can be updated afterwards with a unitary function + * and potentially with ADC in a different state than disabled, + * refer to description of each function for setting + * conditioned to ADC state. + * @note After using this function, other features must be configured + * using LL unitary functions. + * The minimum configuration remaining to be done is: + * - Set ADC group regular or group injected sequencer: + * map channel on the selected sequencer rank. + * Refer to function @ref LL_ADC_REG_SetSequencerRanks(). + * - Set ADC channel sampling time + * Refer to function LL_ADC_SetChannelSamplingTime(); + * @param ADCx ADC instance + * @param ADC_REG_InitStruct Pointer to a @ref LL_ADC_REG_InitTypeDef structure + * @retval An ErrorStatus enumeration value: + * - SUCCESS: ADC registers are initialized + * - ERROR: ADC registers are not initialized + */ +ErrorStatus LL_ADC_REG_Init(ADC_TypeDef *ADCx, LL_ADC_REG_InitTypeDef *ADC_REG_InitStruct) +{ + ErrorStatus status = SUCCESS; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(ADCx)); + assert_param(IS_LL_ADC_REG_TRIG_SOURCE(ADC_REG_InitStruct->TriggerSource)); + assert_param(IS_LL_ADC_REG_SEQ_SCAN_LENGTH(ADC_REG_InitStruct->SequencerLength)); + if(ADC_REG_InitStruct->SequencerLength != LL_ADC_REG_SEQ_SCAN_DISABLE) + { + assert_param(IS_LL_ADC_REG_SEQ_SCAN_DISCONT_MODE(ADC_REG_InitStruct->SequencerDiscont)); + } + assert_param(IS_LL_ADC_REG_CONTINUOUS_MODE(ADC_REG_InitStruct->ContinuousMode)); + assert_param(IS_LL_ADC_REG_DMA_TRANSFER(ADC_REG_InitStruct->DMATransfer)); + + /* Note: Hardware constraint (refer to description of this function): */ + /* ADC instance must be disabled. */ + if(LL_ADC_IsEnabled(ADCx) == 0U) + { + /* Configuration of ADC hierarchical scope: */ + /* - ADC group regular */ + /* - Set ADC group regular trigger source */ + /* - Set ADC group regular sequencer length */ + /* - Set ADC group regular sequencer discontinuous mode */ + /* - Set ADC group regular continuous mode */ + /* - Set ADC group regular conversion data transfer: no transfer or */ + /* transfer by DMA, and DMA requests mode */ + /* Note: On this STM32 serie, ADC trigger edge is set when starting */ + /* ADC conversion. */ + /* Refer to function @ref LL_ADC_REG_StartConversionExtTrig(). */ + if(ADC_REG_InitStruct->SequencerLength != LL_ADC_REG_SEQ_SCAN_DISABLE) + { + MODIFY_REG(ADCx->CR1, + ADC_CR1_DISCEN + | ADC_CR1_DISCNUM + , + ADC_REG_InitStruct->SequencerLength + | ADC_REG_InitStruct->SequencerDiscont + ); + } + else + { + MODIFY_REG(ADCx->CR1, + ADC_CR1_DISCEN + | ADC_CR1_DISCNUM + , + ADC_REG_InitStruct->SequencerLength + | LL_ADC_REG_SEQ_DISCONT_DISABLE + ); + } + + MODIFY_REG(ADCx->CR2, + ADC_CR2_EXTSEL + | ADC_CR2_EXTEN + | ADC_CR2_CONT + | ADC_CR2_DMA + | ADC_CR2_DDS + , + (ADC_REG_InitStruct->TriggerSource & ADC_CR2_EXTSEL) + | ADC_REG_InitStruct->ContinuousMode + | ADC_REG_InitStruct->DMATransfer + ); + + /* Set ADC group regular sequencer length and scan direction */ + /* Note: Hardware constraint (refer to description of this function): */ + /* Note: If ADC instance feature scan mode is disabled */ + /* (refer to ADC instance initialization structure */ + /* parameter @ref SequencersScanMode */ + /* or function @ref LL_ADC_SetSequencersScanMode() ), */ + /* this parameter is discarded. */ + LL_ADC_REG_SetSequencerLength(ADCx, ADC_REG_InitStruct->SequencerLength); + } + else + { + /* Initialization error: ADC instance is not disabled. */ + status = ERROR; + } + return status; +} + +/** + * @brief Set each @ref LL_ADC_REG_InitTypeDef field to default value. + * @param ADC_REG_InitStruct Pointer to a @ref LL_ADC_REG_InitTypeDef structure + * whose fields will be set to default values. + * @retval None + */ +void LL_ADC_REG_StructInit(LL_ADC_REG_InitTypeDef *ADC_REG_InitStruct) +{ + /* Set ADC_REG_InitStruct fields to default values */ + /* Set fields of ADC group regular */ + /* Note: On this STM32 serie, ADC trigger edge is set when starting */ + /* ADC conversion. */ + /* Refer to function @ref LL_ADC_REG_StartConversionExtTrig(). */ + ADC_REG_InitStruct->TriggerSource = LL_ADC_REG_TRIG_SOFTWARE; + ADC_REG_InitStruct->SequencerLength = LL_ADC_REG_SEQ_SCAN_DISABLE; + ADC_REG_InitStruct->SequencerDiscont = LL_ADC_REG_SEQ_DISCONT_DISABLE; + ADC_REG_InitStruct->ContinuousMode = LL_ADC_REG_CONV_SINGLE; + ADC_REG_InitStruct->DMATransfer = LL_ADC_REG_DMA_TRANSFER_NONE; +} + +/** + * @brief Initialize some features of ADC group injected. + * @note These parameters have an impact on ADC scope: ADC group injected. + * Refer to corresponding unitary functions into + * @ref ADC_LL_EF_Configuration_ADC_Group_Regular + * (functions with prefix "INJ"). + * @note The setting of these parameters by function @ref LL_ADC_Init() + * is conditioned to ADC state: + * ADC instance must be disabled. + * This condition is applied to all ADC features, for efficiency + * and compatibility over all STM32 families. However, the different + * features can be set under different ADC state conditions + * (setting possible with ADC enabled without conversion on going, + * ADC enabled with conversion on going, ...) + * Each feature can be updated afterwards with a unitary function + * and potentially with ADC in a different state than disabled, + * refer to description of each function for setting + * conditioned to ADC state. + * @note After using this function, other features must be configured + * using LL unitary functions. + * The minimum configuration remaining to be done is: + * - Set ADC group injected sequencer: + * map channel on the selected sequencer rank. + * Refer to function @ref LL_ADC_INJ_SetSequencerRanks(). + * - Set ADC channel sampling time + * Refer to function LL_ADC_SetChannelSamplingTime(); + * @param ADCx ADC instance + * @param ADC_INJ_InitStruct Pointer to a @ref LL_ADC_INJ_InitTypeDef structure + * @retval An ErrorStatus enumeration value: + * - SUCCESS: ADC registers are initialized + * - ERROR: ADC registers are not initialized + */ +ErrorStatus LL_ADC_INJ_Init(ADC_TypeDef *ADCx, LL_ADC_INJ_InitTypeDef *ADC_INJ_InitStruct) +{ + ErrorStatus status = SUCCESS; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(ADCx)); + assert_param(IS_LL_ADC_INJ_TRIG_SOURCE(ADC_INJ_InitStruct->TriggerSource)); + assert_param(IS_LL_ADC_INJ_SEQ_SCAN_LENGTH(ADC_INJ_InitStruct->SequencerLength)); + if(ADC_INJ_InitStruct->SequencerLength != LL_ADC_INJ_SEQ_SCAN_DISABLE) + { + assert_param(IS_LL_ADC_INJ_SEQ_SCAN_DISCONT_MODE(ADC_INJ_InitStruct->SequencerDiscont)); + } + assert_param(IS_LL_ADC_INJ_TRIG_AUTO(ADC_INJ_InitStruct->TrigAuto)); + + /* Note: Hardware constraint (refer to description of this function): */ + /* ADC instance must be disabled. */ + if(LL_ADC_IsEnabled(ADCx) == 0U) + { + /* Configuration of ADC hierarchical scope: */ + /* - ADC group injected */ + /* - Set ADC group injected trigger source */ + /* - Set ADC group injected sequencer length */ + /* - Set ADC group injected sequencer discontinuous mode */ + /* - Set ADC group injected conversion trigger: independent or */ + /* from ADC group regular */ + /* Note: On this STM32 serie, ADC trigger edge is set when starting */ + /* ADC conversion. */ + /* Refer to function @ref LL_ADC_INJ_StartConversionExtTrig(). */ + if(ADC_INJ_InitStruct->SequencerLength != LL_ADC_REG_SEQ_SCAN_DISABLE) + { + MODIFY_REG(ADCx->CR1, + ADC_CR1_JDISCEN + | ADC_CR1_JAUTO + , + ADC_INJ_InitStruct->SequencerDiscont + | ADC_INJ_InitStruct->TrigAuto + ); + } + else + { + MODIFY_REG(ADCx->CR1, + ADC_CR1_JDISCEN + | ADC_CR1_JAUTO + , + LL_ADC_REG_SEQ_DISCONT_DISABLE + | ADC_INJ_InitStruct->TrigAuto + ); + } + + MODIFY_REG(ADCx->CR2, + ADC_CR2_JEXTSEL + | ADC_CR2_JEXTEN + , + (ADC_INJ_InitStruct->TriggerSource & ADC_CR2_JEXTSEL) + ); + + /* Note: Hardware constraint (refer to description of this function): */ + /* Note: If ADC instance feature scan mode is disabled */ + /* (refer to ADC instance initialization structure */ + /* parameter @ref SequencersScanMode */ + /* or function @ref LL_ADC_SetSequencersScanMode() ), */ + /* this parameter is discarded. */ + LL_ADC_INJ_SetSequencerLength(ADCx, ADC_INJ_InitStruct->SequencerLength); + } + else + { + /* Initialization error: ADC instance is not disabled. */ + status = ERROR; + } + return status; +} + +/** + * @brief Set each @ref LL_ADC_INJ_InitTypeDef field to default value. + * @param ADC_INJ_InitStruct Pointer to a @ref LL_ADC_INJ_InitTypeDef structure + * whose fields will be set to default values. + * @retval None + */ +void LL_ADC_INJ_StructInit(LL_ADC_INJ_InitTypeDef *ADC_INJ_InitStruct) +{ + /* Set ADC_INJ_InitStruct fields to default values */ + /* Set fields of ADC group injected */ + ADC_INJ_InitStruct->TriggerSource = LL_ADC_INJ_TRIG_SOFTWARE; + ADC_INJ_InitStruct->SequencerLength = LL_ADC_INJ_SEQ_SCAN_DISABLE; + ADC_INJ_InitStruct->SequencerDiscont = LL_ADC_INJ_SEQ_DISCONT_DISABLE; + ADC_INJ_InitStruct->TrigAuto = LL_ADC_INJ_TRIG_INDEPENDENT; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* ADC1 */ + +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_ll_comp.c b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_ll_comp.c new file mode 100755 index 0000000..8250a89 --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_ll_comp.c @@ -0,0 +1,348 @@ +/** + ****************************************************************************** + * @file stm32l1xx_ll_comp.c + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief COMP LL module driver + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ +#if defined(USE_FULL_LL_DRIVER) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_ll_comp.h" + +#ifdef USE_FULL_ASSERT + #include "stm32_assert.h" +#else + #define assert_param(expr) ((void)0U) +#endif + +/** @addtogroup STM32L1xx_LL_Driver + * @{ + */ + +#if defined (COMP1) || defined (COMP2) + +/** @addtogroup COMP_LL COMP + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ + +/** @addtogroup COMP_LL_Private_Macros + * @{ + */ + +/* Check of parameters for configuration of COMP hierarchical scope: */ +/* COMP instance. */ + +#define IS_LL_COMP_POWER_MODE(__POWER_MODE__) \ + ( ((__POWER_MODE__) == LL_COMP_POWERMODE_MEDIUMSPEED) \ + || ((__POWER_MODE__) == LL_COMP_POWERMODE_ULTRALOWPOWER) \ + ) + +/* Note: On this STM32 serie, comparator input plus parameters are */ +/* the different depending on COMP instances. */ +#if defined(RI_ASCR1_CH_31) +#define IS_LL_COMP_INPUT_PLUS(__COMP_INSTANCE__, __INPUT_PLUS__) \ + (((__COMP_INSTANCE__) == COMP1) \ + ? ( \ + ((__INPUT_PLUS__) == LL_COMP_INPUT_PLUS_IO5) \ + || ((__INPUT_PLUS__) == LL_COMP_INPUT_PLUS_IO6) \ + || ((__INPUT_PLUS__) == LL_COMP_INPUT_PLUS_IO7) \ + || ((__INPUT_PLUS__) == LL_COMP_INPUT_PLUS_IO8) \ + || ((__INPUT_PLUS__) == LL_COMP_INPUT_PLUS_IO9) \ + || ((__INPUT_PLUS__) == LL_COMP_INPUT_PLUS_IO10) \ + || ((__INPUT_PLUS__) == LL_COMP_INPUT_PLUS_IO11) \ + || ((__INPUT_PLUS__) == LL_COMP_INPUT_PLUS_IO12) \ + || ((__INPUT_PLUS__) == LL_COMP_INPUT_PLUS_IO13) \ + || ((__INPUT_PLUS__) == LL_COMP_INPUT_PLUS_IO14) \ + || ((__INPUT_PLUS__) == LL_COMP_INPUT_PLUS_IO15) \ + || ((__INPUT_PLUS__) == LL_COMP_INPUT_PLUS_IO16) \ + || ((__INPUT_PLUS__) == LL_COMP_INPUT_PLUS_IO17) \ + || ((__INPUT_PLUS__) == LL_COMP_INPUT_PLUS_IO18) \ + || ((__INPUT_PLUS__) == LL_COMP_INPUT_PLUS_IO19) \ + || ((__INPUT_PLUS__) == LL_COMP_INPUT_PLUS_IO20) \ + || ((__INPUT_PLUS__) == LL_COMP_INPUT_PLUS_IO21) \ + || ((__INPUT_PLUS__) == LL_COMP_INPUT_PLUS_IO22) \ + || ((__INPUT_PLUS__) == LL_COMP_INPUT_PLUS_IO23) \ + || ((__INPUT_PLUS__) == LL_COMP_INPUT_PLUS_IO24) \ + || ((__INPUT_PLUS__) == LL_COMP_INPUT_PLUS_IO25) \ + || ((__INPUT_PLUS__) == LL_COMP_INPUT_PLUS_IO26) \ + || ((__INPUT_PLUS__) == LL_COMP_INPUT_PLUS_IO27) \ + || ((__INPUT_PLUS__) == LL_COMP_INPUT_PLUS_IO28) \ + || ((__INPUT_PLUS__) == LL_COMP_INPUT_PLUS_IO29) \ + || ((__INPUT_PLUS__) == LL_COMP_INPUT_PLUS_IO30) \ + || ((__INPUT_PLUS__) == LL_COMP_INPUT_PLUS_IO31) \ + || ((__INPUT_PLUS__) == LL_COMP_INPUT_PLUS_IO32) \ + || ((__INPUT_PLUS__) == LL_COMP_INPUT_PLUS_IO33) \ + ) \ + : \ + ( \ + ((__INPUT_PLUS__) == LL_COMP_INPUT_PLUS_IO1) \ + || ((__INPUT_PLUS__) == LL_COMP_INPUT_PLUS_IO2) \ + || ((__INPUT_PLUS__) == LL_COMP_INPUT_PLUS_IO3) \ + || ((__INPUT_PLUS__) == LL_COMP_INPUT_PLUS_IO4) \ + ) \ + ) +#else +#define IS_LL_COMP_INPUT_PLUS(__COMP_INSTANCE__, __INPUT_PLUS__) \ + (((__COMP_INSTANCE__) == COMP1) \ + ? ( \ + ((__INPUT_PLUS__) == LL_COMP_INPUT_PLUS_IO5) \ + || ((__INPUT_PLUS__) == LL_COMP_INPUT_PLUS_IO6) \ + || ((__INPUT_PLUS__) == LL_COMP_INPUT_PLUS_IO7) \ + || ((__INPUT_PLUS__) == LL_COMP_INPUT_PLUS_IO8) \ + || ((__INPUT_PLUS__) == LL_COMP_INPUT_PLUS_IO9) \ + || ((__INPUT_PLUS__) == LL_COMP_INPUT_PLUS_IO10) \ + || ((__INPUT_PLUS__) == LL_COMP_INPUT_PLUS_IO11) \ + || ((__INPUT_PLUS__) == LL_COMP_INPUT_PLUS_IO12) \ + || ((__INPUT_PLUS__) == LL_COMP_INPUT_PLUS_IO13) \ + || ((__INPUT_PLUS__) == LL_COMP_INPUT_PLUS_IO14) \ + || ((__INPUT_PLUS__) == LL_COMP_INPUT_PLUS_IO15) \ + || ((__INPUT_PLUS__) == LL_COMP_INPUT_PLUS_IO16) \ + || ((__INPUT_PLUS__) == LL_COMP_INPUT_PLUS_IO17) \ + || ((__INPUT_PLUS__) == LL_COMP_INPUT_PLUS_IO18) \ + || ((__INPUT_PLUS__) == LL_COMP_INPUT_PLUS_IO19) \ + || ((__INPUT_PLUS__) == LL_COMP_INPUT_PLUS_IO20) \ + || ((__INPUT_PLUS__) == LL_COMP_INPUT_PLUS_IO21) \ + || ((__INPUT_PLUS__) == LL_COMP_INPUT_PLUS_IO22) \ + || ((__INPUT_PLUS__) == LL_COMP_INPUT_PLUS_IO23) \ + || ((__INPUT_PLUS__) == LL_COMP_INPUT_PLUS_IO24) \ + || ((__INPUT_PLUS__) == LL_COMP_INPUT_PLUS_IO25) \ + || ((__INPUT_PLUS__) == LL_COMP_INPUT_PLUS_IO26) \ + || ((__INPUT_PLUS__) == LL_COMP_INPUT_PLUS_IO27) \ + || ((__INPUT_PLUS__) == LL_COMP_INPUT_PLUS_IO28) \ + ) \ + : \ + ( \ + ((__INPUT_PLUS__) == LL_COMP_INPUT_PLUS_IO1) \ + || ((__INPUT_PLUS__) == LL_COMP_INPUT_PLUS_IO2) \ + ) \ + ) +#endif + +/* Note: On this STM32 serie, comparator input minus parameters are */ +/* the different depending on COMP instances. */ +#define IS_LL_COMP_INPUT_MINUS(__COMP_INSTANCE__, __INPUT_MINUS__) \ + (((__COMP_INSTANCE__) == COMP1) \ + ? ( \ + ((__INPUT_MINUS__) == LL_COMP_INPUT_MINUS_VREFINT) \ + ) \ + : \ + ( \ + ((__INPUT_MINUS__) == LL_COMP_INPUT_MINUS_1_4VREFINT) \ + || ((__INPUT_MINUS__) == LL_COMP_INPUT_MINUS_1_2VREFINT) \ + || ((__INPUT_MINUS__) == LL_COMP_INPUT_MINUS_3_4VREFINT) \ + || ((__INPUT_MINUS__) == LL_COMP_INPUT_MINUS_VREFINT) \ + || ((__INPUT_MINUS__) == LL_COMP_INPUT_MINUS_DAC1_CH1) \ + || ((__INPUT_MINUS__) == LL_COMP_INPUT_MINUS_DAC1_CH2) \ + || ((__INPUT_MINUS__) == LL_COMP_INPUT_MINUS_IO1) \ + ) \ + ) + +#define IS_LL_COMP_OUTPUT_SELECTION(__OUTPUT_SELECTION__) \ + ( ((__OUTPUT_SELECTION__) == LL_COMP_OUTPUT_NONE) \ + || ((__OUTPUT_SELECTION__) == LL_COMP_OUTPUT_TIM2_IC4) \ + || ((__OUTPUT_SELECTION__) == LL_COMP_OUTPUT_TIM2_OCREFCLR) \ + || ((__OUTPUT_SELECTION__) == LL_COMP_OUTPUT_TIM3_IC4) \ + || ((__OUTPUT_SELECTION__) == LL_COMP_OUTPUT_TIM3_OCREFCLR) \ + || ((__OUTPUT_SELECTION__) == LL_COMP_OUTPUT_TIM4_IC4) \ + || ((__OUTPUT_SELECTION__) == LL_COMP_OUTPUT_TIM4_OCREFCLR) \ + || ((__OUTPUT_SELECTION__) == LL_COMP_OUTPUT_TIM10_IC1) \ + ) + +/** + * @} + */ + + +/* Private function prototypes -----------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup COMP_LL_Exported_Functions + * @{ + */ + +/** @addtogroup COMP_LL_EF_Init + * @{ + */ + +/** + * @brief De-initialize registers of the selected COMP instance + * to their default reset values. + * @note If comparator is locked, de-initialization by software is + * not possible. + * The only way to unlock the comparator is a device hardware reset. + * @param COMPx COMP instance + * @retval An ErrorStatus enumeration value: + * - SUCCESS: COMP registers are de-initialized + * - ERROR: COMP registers are not de-initialized + */ +ErrorStatus LL_COMP_DeInit(COMP_TypeDef *COMPx) +{ + ErrorStatus status = SUCCESS; + + /* Check the parameters */ + assert_param(IS_COMP_ALL_INSTANCE(COMPx)); + + /* Note: On this STM32 serie, only COMP instance COMP2 has */ + /* features settables: power mode, input minus selection */ + /* and output selection. */ + /* Note: On this STM32 serie, setting COMP instance COMP2 input minus */ + /* is enabling the comparator. */ + /* Reset COMP2 input minus also disable the comparator. */ + /* Note: In case of de-initialization of COMP instance COMP1: */ + /* Switch COMP_CSR_SW1 is not modified because can be used */ + /* to connect OPAMP3 to ADC. */ + /* Switches RI_ASCR1_VCOMP, RI_ASCR1_SCM are reset: let routing */ + /* interface under control of ADC. */ + if(COMPx == COMP1) + { + CLEAR_BIT(COMP->CSR, + ( COMP_CSR_CMP1EN + | COMP_CSR_10KPU + | COMP_CSR_400KPU + | COMP_CSR_10KPD + | COMP_CSR_400KPD + ) + ); + } + else + { + CLEAR_BIT(COMP->CSR, + ( COMP_CSR_SPEED + | COMP_CSR_INSEL + | COMP_CSR_OUTSEL + ) + ); + } + + /* Set comparator input plus */ + LL_COMP_SetInputPlus(COMPx, LL_COMP_INPUT_PLUS_NONE); + + return status; +} + +/** + * @brief Initialize some features of COMP instance. + * @note This function configures features of the selected COMP instance. + * Some features are also available at scope COMP common instance + * (common to several COMP instances). + * Refer to functions having argument "COMPxy_COMMON" as parameter. + * @param COMPx COMP instance + * @param COMP_InitStruct Pointer to a @ref LL_COMP_InitTypeDef structure + * @retval An ErrorStatus enumeration value: + * - SUCCESS: COMP registers are initialized + * - ERROR: COMP registers are not initialized + */ +ErrorStatus LL_COMP_Init(COMP_TypeDef *COMPx, LL_COMP_InitTypeDef *COMP_InitStruct) +{ + ErrorStatus status = SUCCESS; + + /* Check the parameters */ + assert_param(IS_COMP_ALL_INSTANCE(COMPx)); + if(COMPx == COMP2) + { + assert_param(IS_LL_COMP_POWER_MODE(COMP_InitStruct->PowerMode)); + assert_param(IS_LL_COMP_INPUT_MINUS(COMPx, COMP_InitStruct->InputMinus)); + assert_param(IS_LL_COMP_OUTPUT_SELECTION(COMP_InitStruct->OutputSelection)); + } + assert_param(IS_LL_COMP_INPUT_PLUS(COMPx, COMP_InitStruct->InputPlus)); + + /* Configuration of comparator instance : */ + /* - PowerMode */ + /* - InputPlus */ + /* - InputMinus */ + /* - OutputSelection */ + /* Note: On this STM32 serie, only COMP instance COMP2 has */ + /* features settables: power mode, input minus selection */ + /* and output selection. */ + /* Note: On this STM32 serie, setting COMP instance COMP2 input minus */ + /* is enabling the comparator. */ + if(COMPx == COMP2) + { + MODIFY_REG(COMP->CSR, + COMP_CSR_SPEED + | COMP_CSR_INSEL + | COMP_CSR_OUTSEL + , + COMP_InitStruct->PowerMode + | COMP_InitStruct->InputMinus + | COMP_InitStruct->OutputSelection + ); + } + + /* Set comparator input plus */ + LL_COMP_SetInputPlus(COMPx, COMP_InitStruct->InputPlus); + + return status; +} + +/** + * @brief Set each @ref LL_COMP_InitTypeDef field to default value. + * @param COMP_InitStruct: pointer to a @ref LL_COMP_InitTypeDef structure + * whose fields will be set to default values. + * @retval None + */ +void LL_COMP_StructInit(LL_COMP_InitTypeDef *COMP_InitStruct) +{ + /* Set COMP_InitStruct fields to default values */ + COMP_InitStruct->PowerMode = LL_COMP_POWERMODE_ULTRALOWPOWER; + COMP_InitStruct->InputPlus = LL_COMP_INPUT_PLUS_IO1; + COMP_InitStruct->InputMinus = LL_COMP_INPUT_MINUS_VREFINT; + COMP_InitStruct->OutputSelection = LL_COMP_OUTPUT_NONE; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* COMP1 || COMP2 */ + +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_ll_crc.c b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_ll_crc.c new file mode 100755 index 0000000..3edc9b0 --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_ll_crc.c @@ -0,0 +1,125 @@ +/** + ****************************************************************************** + * @file stm32l1xx_ll_crc.c + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief CRC LL module driver. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ +#if defined(USE_FULL_LL_DRIVER) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_ll_crc.h" +#include "stm32l1xx_ll_bus.h" + +#ifdef USE_FULL_ASSERT +#include "stm32_assert.h" +#else +#define assert_param(expr) ((void)0U) +#endif + +/** @addtogroup STM32L1xx_LL_Driver + * @{ + */ + +#if defined (CRC) + +/** @addtogroup CRC_LL + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup CRC_LL_Exported_Functions + * @{ + */ + +/** @addtogroup CRC_LL_EF_Init + * @{ + */ + +/** + * @brief De-initialize CRC registers (Registers restored to their default values). + * @param CRCx CRC Instance + * @retval An ErrorStatus enumeration value: + * - SUCCESS: CRC registers are de-initialized + * - ERROR: CRC registers are not de-initialized + */ +ErrorStatus LL_CRC_DeInit(CRC_TypeDef *CRCx) +{ + ErrorStatus status = SUCCESS; + + /* Check the parameters */ + assert_param(IS_CRC_ALL_INSTANCE(CRCx)); + + if (CRCx == CRC) + { + /* Force CRC reset */ + LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_CRC); + + /* Release CRC reset */ + LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_CRC); + } + else + { + status = ERROR; + } + + return (status); +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined (CRC) */ + +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_ll_dac.c b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_ll_dac.c new file mode 100755 index 0000000..6bc8196 --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_ll_dac.c @@ -0,0 +1,273 @@ +/** + ****************************************************************************** + * @file stm32l1xx_ll_dac.c + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief DAC LL module driver + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ +#if defined(USE_FULL_LL_DRIVER) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_ll_dac.h" +#include "stm32l1xx_ll_bus.h" + +#ifdef USE_FULL_ASSERT + #include "stm32_assert.h" +#else + #define assert_param(expr) ((void)0U) +#endif + +/** @addtogroup STM32L1xx_LL_Driver + * @{ + */ + +#if defined (DAC1) + +/** @addtogroup DAC_LL DAC + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ + +/** @addtogroup DAC_LL_Private_Macros + * @{ + */ + +#define IS_LL_DAC_CHANNEL(__DACX__, __DAC_CHANNEL__) \ + ( \ + ((__DAC_CHANNEL__) == LL_DAC_CHANNEL_1) \ + || ((__DAC_CHANNEL__) == LL_DAC_CHANNEL_2) \ + ) + +#define IS_LL_DAC_TRIGGER_SOURCE(__TRIGGER_SOURCE__) \ + ( ((__TRIGGER_SOURCE__) == LL_DAC_TRIG_SOFTWARE) \ + || ((__TRIGGER_SOURCE__) == LL_DAC_TRIG_EXT_TIM2_TRGO) \ + || ((__TRIGGER_SOURCE__) == LL_DAC_TRIG_EXT_TIM4_TRGO) \ + || ((__TRIGGER_SOURCE__) == LL_DAC_TRIG_EXT_TIM6_TRGO) \ + || ((__TRIGGER_SOURCE__) == LL_DAC_TRIG_EXT_TIM7_TRGO) \ + || ((__TRIGGER_SOURCE__) == LL_DAC_TRIG_EXT_TIM9_TRGO) \ + || ((__TRIGGER_SOURCE__) == LL_DAC_TRIG_EXT_EXTI_LINE9) \ + ) + +#define IS_LL_DAC_WAVE_AUTO_GENER_MODE(__WAVE_AUTO_GENERATION_MODE__) \ + ( ((__WAVE_AUTO_GENERATION_MODE__) == LL_DAC_WAVE_AUTO_GENERATION_NONE) \ + || ((__WAVE_AUTO_GENERATION_MODE__) == LL_DAC_WAVE_AUTO_GENERATION_NOISE) \ + || ((__WAVE_AUTO_GENERATION_MODE__) == LL_DAC_WAVE_AUTO_GENERATION_TRIANGLE) \ + ) + +#define IS_LL_DAC_WAVE_AUTO_GENER_CONFIG(__WAVE_AUTO_GENERATION_CONFIG__) \ + ( ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_NOISE_LFSR_UNMASK_BIT0) \ + || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_NOISE_LFSR_UNMASK_BITS1_0) \ + || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_NOISE_LFSR_UNMASK_BITS2_0) \ + || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_NOISE_LFSR_UNMASK_BITS3_0) \ + || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_NOISE_LFSR_UNMASK_BITS4_0) \ + || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_NOISE_LFSR_UNMASK_BITS5_0) \ + || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_NOISE_LFSR_UNMASK_BITS6_0) \ + || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_NOISE_LFSR_UNMASK_BITS7_0) \ + || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_NOISE_LFSR_UNMASK_BITS8_0) \ + || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_NOISE_LFSR_UNMASK_BITS9_0) \ + || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_NOISE_LFSR_UNMASK_BITS10_0) \ + || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_NOISE_LFSR_UNMASK_BITS11_0) \ + || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_TRIANGLE_AMPLITUDE_1) \ + || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_TRIANGLE_AMPLITUDE_3) \ + || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_TRIANGLE_AMPLITUDE_7) \ + || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_TRIANGLE_AMPLITUDE_15) \ + || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_TRIANGLE_AMPLITUDE_31) \ + || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_TRIANGLE_AMPLITUDE_63) \ + || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_TRIANGLE_AMPLITUDE_127) \ + || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_TRIANGLE_AMPLITUDE_255) \ + || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_TRIANGLE_AMPLITUDE_511) \ + || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_TRIANGLE_AMPLITUDE_1023) \ + || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_TRIANGLE_AMPLITUDE_2047) \ + || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_TRIANGLE_AMPLITUDE_4095) \ + ) + +#define IS_LL_DAC_OUTPUT_BUFFER(__OUTPUT_BUFFER__) \ + ( ((__OUTPUT_BUFFER__) == LL_DAC_OUTPUT_BUFFER_ENABLE) \ + || ((__OUTPUT_BUFFER__) == LL_DAC_OUTPUT_BUFFER_DISABLE) \ + ) + +/** + * @} + */ + + +/* Private function prototypes -----------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup DAC_LL_Exported_Functions + * @{ + */ + +/** @addtogroup DAC_LL_EF_Init + * @{ + */ + +/** + * @brief De-initialize registers of the selected DAC instance + * to their default reset values. + * @param DACx DAC instance + * @retval An ErrorStatus enumeration value: + * - SUCCESS: DAC registers are de-initialized + * - ERROR: not applicable + */ +ErrorStatus LL_DAC_DeInit(DAC_TypeDef *DACx) +{ + /* Check the parameters */ + assert_param(IS_DAC_ALL_INSTANCE(DACx)); + + /* Force reset of DAC clock */ + LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_DAC1); + + /* Release reset of DAC clock */ + LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_DAC1); + + return SUCCESS; +} + +/** + * @brief Initialize some features of DAC instance. + * @note The setting of these parameters by function @ref LL_DAC_Init() + * is conditioned to DAC state: + * DAC instance must be disabled. + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 + * @param DAC_InitStruct Pointer to a @ref LL_DAC_InitTypeDef structure + * @retval An ErrorStatus enumeration value: + * - SUCCESS: DAC registers are initialized + * - ERROR: DAC registers are not initialized + */ +ErrorStatus LL_DAC_Init(DAC_TypeDef *DACx, uint32_t DAC_Channel, LL_DAC_InitTypeDef *DAC_InitStruct) +{ + ErrorStatus status = SUCCESS; + + /* Check the parameters */ + assert_param(IS_DAC_ALL_INSTANCE(DACx)); + assert_param(IS_LL_DAC_CHANNEL(DACx, DAC_Channel)); + assert_param(IS_LL_DAC_TRIGGER_SOURCE(DAC_InitStruct->TriggerSource)); + assert_param(IS_LL_DAC_OUTPUT_BUFFER(DAC_InitStruct->OutputBuffer)); + assert_param(IS_LL_DAC_WAVE_AUTO_GENER_MODE(DAC_InitStruct->WaveAutoGeneration)); + if (DAC_InitStruct->WaveAutoGeneration != LL_DAC_WAVE_AUTO_GENERATION_NONE) + { + assert_param(IS_LL_DAC_WAVE_AUTO_GENER_CONFIG(DAC_InitStruct->WaveAutoGenerationConfig)); + } + + /* Note: Hardware constraint (refer to description of this function) */ + /* DAC instance must be disabled. */ + if(LL_DAC_IsEnabled(DACx, DAC_Channel) == 0U) + { + /* Configuration of DAC channel: */ + /* - TriggerSource */ + /* - WaveAutoGeneration */ + /* - OutputBuffer */ + if (DAC_InitStruct->WaveAutoGeneration != LL_DAC_WAVE_AUTO_GENERATION_NONE) + { + MODIFY_REG(DACx->CR, + ( DAC_CR_TSEL1 + | DAC_CR_WAVE1 + | DAC_CR_MAMP1 + | DAC_CR_BOFF1 + ) << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK) + , + ( DAC_InitStruct->TriggerSource + | DAC_InitStruct->WaveAutoGeneration + | DAC_InitStruct->WaveAutoGenerationConfig + | DAC_InitStruct->OutputBuffer + ) << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK) + ); + } + else + { + MODIFY_REG(DACx->CR, + ( DAC_CR_TSEL1 + | DAC_CR_WAVE1 + | DAC_CR_BOFF1 + ) << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK) + , + ( DAC_InitStruct->TriggerSource + | LL_DAC_WAVE_AUTO_GENERATION_NONE + | DAC_InitStruct->OutputBuffer + ) << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK) + ); + } + } + else + { + /* Initialization error: DAC instance is not disabled. */ + status = ERROR; + } + return status; +} + +/** + * @brief Set each @ref LL_DAC_InitTypeDef field to default value. + * @param DAC_InitStruct pointer to a @ref LL_DAC_InitTypeDef structure + * whose fields will be set to default values. + * @retval None + */ +void LL_DAC_StructInit(LL_DAC_InitTypeDef *DAC_InitStruct) +{ + /* Set DAC_InitStruct fields to default values */ + DAC_InitStruct->TriggerSource = LL_DAC_TRIG_SOFTWARE; + DAC_InitStruct->WaveAutoGeneration = LL_DAC_WAVE_AUTO_GENERATION_NONE; + /* Note: Parameter discarded if wave auto generation is disabled, */ + /* set anyway to its default value. */ + DAC_InitStruct->WaveAutoGenerationConfig = LL_DAC_NOISE_LFSR_UNMASK_BIT0; + DAC_InitStruct->OutputBuffer = LL_DAC_OUTPUT_BUFFER_ENABLE; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* DAC1 */ + +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_ll_dma.c b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_ll_dma.c new file mode 100755 index 0000000..deca4b7 --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_ll_dma.c @@ -0,0 +1,383 @@ +/** + ****************************************************************************** + * @file stm32l1xx_ll_dma.c + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief DMA LL module driver. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ +#if defined(USE_FULL_LL_DRIVER) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_ll_dma.h" +#include "stm32l1xx_ll_bus.h" +#ifdef USE_FULL_ASSERT +#include "stm32_assert.h" +#else +#define assert_param(expr) ((void)0U) +#endif + +/** @addtogroup STM32L1xx_LL_Driver + * @{ + */ + +#if defined (DMA1) || defined (DMA2) + +/** @defgroup DMA_LL DMA + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/** @addtogroup DMA_LL_Private_Macros + * @{ + */ +#define IS_LL_DMA_DIRECTION(__VALUE__) (((__VALUE__) == LL_DMA_DIRECTION_PERIPH_TO_MEMORY) || \ + ((__VALUE__) == LL_DMA_DIRECTION_MEMORY_TO_PERIPH) || \ + ((__VALUE__) == LL_DMA_DIRECTION_MEMORY_TO_MEMORY)) + +#define IS_LL_DMA_MODE(__VALUE__) (((__VALUE__) == LL_DMA_MODE_NORMAL) || \ + ((__VALUE__) == LL_DMA_MODE_CIRCULAR)) + +#define IS_LL_DMA_PERIPHINCMODE(__VALUE__) (((__VALUE__) == LL_DMA_PERIPH_INCREMENT) || \ + ((__VALUE__) == LL_DMA_PERIPH_NOINCREMENT)) + +#define IS_LL_DMA_MEMORYINCMODE(__VALUE__) (((__VALUE__) == LL_DMA_MEMORY_INCREMENT) || \ + ((__VALUE__) == LL_DMA_MEMORY_NOINCREMENT)) + +#define IS_LL_DMA_PERIPHDATASIZE(__VALUE__) (((__VALUE__) == LL_DMA_PDATAALIGN_BYTE) || \ + ((__VALUE__) == LL_DMA_PDATAALIGN_HALFWORD) || \ + ((__VALUE__) == LL_DMA_PDATAALIGN_WORD)) + +#define IS_LL_DMA_MEMORYDATASIZE(__VALUE__) (((__VALUE__) == LL_DMA_MDATAALIGN_BYTE) || \ + ((__VALUE__) == LL_DMA_MDATAALIGN_HALFWORD) || \ + ((__VALUE__) == LL_DMA_MDATAALIGN_WORD)) + +#define IS_LL_DMA_NBDATA(__VALUE__) ((__VALUE__) <= (uint32_t)0x0000FFFFU) + + +#define IS_LL_DMA_PRIORITY(__VALUE__) (((__VALUE__) == LL_DMA_PRIORITY_LOW) || \ + ((__VALUE__) == LL_DMA_PRIORITY_MEDIUM) || \ + ((__VALUE__) == LL_DMA_PRIORITY_HIGH) || \ + ((__VALUE__) == LL_DMA_PRIORITY_VERYHIGH)) + +#if defined (DMA2) +#if defined (DMA2_Channel6) && defined (DMA2_Channel7) +#define IS_LL_DMA_ALL_CHANNEL_INSTANCE(INSTANCE, CHANNEL) ((((INSTANCE) == DMA1) && \ + (((CHANNEL) == LL_DMA_CHANNEL_1) || \ + ((CHANNEL) == LL_DMA_CHANNEL_2) || \ + ((CHANNEL) == LL_DMA_CHANNEL_3) || \ + ((CHANNEL) == LL_DMA_CHANNEL_4) || \ + ((CHANNEL) == LL_DMA_CHANNEL_5) || \ + ((CHANNEL) == LL_DMA_CHANNEL_6) || \ + ((CHANNEL) == LL_DMA_CHANNEL_7))) || \ + (((INSTANCE) == DMA2) && \ + (((CHANNEL) == LL_DMA_CHANNEL_1) || \ + ((CHANNEL) == LL_DMA_CHANNEL_2) || \ + ((CHANNEL) == LL_DMA_CHANNEL_3) || \ + ((CHANNEL) == LL_DMA_CHANNEL_4) || \ + ((CHANNEL) == LL_DMA_CHANNEL_5) || \ + ((CHANNEL) == LL_DMA_CHANNEL_6) || \ + ((CHANNEL) == LL_DMA_CHANNEL_7)))) +#else +#define IS_LL_DMA_ALL_CHANNEL_INSTANCE(INSTANCE, CHANNEL) ((((INSTANCE) == DMA1) && \ + (((CHANNEL) == LL_DMA_CHANNEL_1) || \ + ((CHANNEL) == LL_DMA_CHANNEL_2) || \ + ((CHANNEL) == LL_DMA_CHANNEL_3) || \ + ((CHANNEL) == LL_DMA_CHANNEL_4) || \ + ((CHANNEL) == LL_DMA_CHANNEL_5) || \ + ((CHANNEL) == LL_DMA_CHANNEL_6) || \ + ((CHANNEL) == LL_DMA_CHANNEL_7))) || \ + (((INSTANCE) == DMA2) && \ + (((CHANNEL) == LL_DMA_CHANNEL_1) || \ + ((CHANNEL) == LL_DMA_CHANNEL_2) || \ + ((CHANNEL) == LL_DMA_CHANNEL_3) || \ + ((CHANNEL) == LL_DMA_CHANNEL_4) || \ + ((CHANNEL) == LL_DMA_CHANNEL_5)))) +#endif +#else +#define IS_LL_DMA_ALL_CHANNEL_INSTANCE(INSTANCE, CHANNEL) ((((INSTANCE) == DMA1) && \ + (((CHANNEL) == LL_DMA_CHANNEL_1)|| \ + ((CHANNEL) == LL_DMA_CHANNEL_2) || \ + ((CHANNEL) == LL_DMA_CHANNEL_3) || \ + ((CHANNEL) == LL_DMA_CHANNEL_4) || \ + ((CHANNEL) == LL_DMA_CHANNEL_5) || \ + ((CHANNEL) == LL_DMA_CHANNEL_6) || \ + ((CHANNEL) == LL_DMA_CHANNEL_7)))) +#endif +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup DMA_LL_Exported_Functions + * @{ + */ + +/** @addtogroup DMA_LL_EF_Init + * @{ + */ + +/** + * @brief De-initialize the DMA registers to their default reset values. + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_ALL + * @retval An ErrorStatus enumeration value: + * - SUCCESS: DMA registers are de-initialized + * - ERROR: DMA registers are not de-initialized + */ +uint32_t LL_DMA_DeInit(DMA_TypeDef *DMAx, uint32_t Channel) +{ + DMA_Channel_TypeDef *tmp = (DMA_Channel_TypeDef *)DMA1_Channel1; + ErrorStatus status = SUCCESS; + + /* Check the DMA Instance DMAx and Channel parameters*/ + assert_param(IS_LL_DMA_ALL_CHANNEL_INSTANCE(DMAx, Channel) || (Channel == LL_DMA_CHANNEL_ALL)); + + if (Channel == LL_DMA_CHANNEL_ALL) + { + if (DMAx == DMA1) + { + /* Force reset of DMA clock */ + LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_DMA1); + + /* Release reset of DMA clock */ + LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_DMA1); + } +#if defined(DMA2) + else if (DMAx == DMA2) + { + /* Force reset of DMA clock */ + LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_DMA2); + + /* Release reset of DMA clock */ + LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_DMA2); + } +#endif + else + { + status = ERROR; + } + } + else + { + tmp = (DMA_Channel_TypeDef *)(__LL_DMA_GET_CHANNEL_INSTANCE(DMAx, Channel)); + + /* Disable the selected DMAx_Channely */ + CLEAR_BIT(tmp->CCR, DMA_CCR_EN); + + /* Reset DMAx_Channely control register */ + LL_DMA_WriteReg(tmp, CCR, 0U); + + /* Reset DMAx_Channely remaining bytes register */ + LL_DMA_WriteReg(tmp, CNDTR, 0U); + + /* Reset DMAx_Channely peripheral address register */ + LL_DMA_WriteReg(tmp, CPAR, 0U); + + /* Reset DMAx_Channely memory address register */ + LL_DMA_WriteReg(tmp, CMAR, 0U); + + + if (Channel == LL_DMA_CHANNEL_1) + { + /* Reset interrupt pending bits for DMAx Channel1 */ + LL_DMA_ClearFlag_GI1(DMAx); + } + else if (Channel == LL_DMA_CHANNEL_2) + { + /* Reset interrupt pending bits for DMAx Channel2 */ + LL_DMA_ClearFlag_GI2(DMAx); + } + else if (Channel == LL_DMA_CHANNEL_3) + { + /* Reset interrupt pending bits for DMAx Channel3 */ + LL_DMA_ClearFlag_GI3(DMAx); + } + else if (Channel == LL_DMA_CHANNEL_4) + { + /* Reset interrupt pending bits for DMAx Channel4 */ + LL_DMA_ClearFlag_GI4(DMAx); + } + else if (Channel == LL_DMA_CHANNEL_5) + { + /* Reset interrupt pending bits for DMAx Channel5 */ + LL_DMA_ClearFlag_GI5(DMAx); + } + + else if (Channel == LL_DMA_CHANNEL_6) + { + /* Reset interrupt pending bits for DMAx Channel6 */ + LL_DMA_ClearFlag_GI6(DMAx); + } + else if (Channel == LL_DMA_CHANNEL_7) + { + /* Reset interrupt pending bits for DMAx Channel7 */ + LL_DMA_ClearFlag_GI7(DMAx); + } + else + { + status = ERROR; + } + } + + return status; +} + +/** + * @brief Initialize the DMA registers according to the specified parameters in DMA_InitStruct. + * @note To convert DMAx_Channely Instance to DMAx Instance and Channely, use helper macros : + * @arg @ref __LL_DMA_GET_INSTANCE + * @arg @ref __LL_DMA_GET_CHANNEL + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param DMA_InitStruct pointer to a @ref LL_DMA_InitTypeDef structure. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: DMA registers are initialized + * - ERROR: Not applicable + */ +uint32_t LL_DMA_Init(DMA_TypeDef *DMAx, uint32_t Channel, LL_DMA_InitTypeDef *DMA_InitStruct) +{ + /* Check the DMA Instance DMAx and Channel parameters*/ + assert_param(IS_LL_DMA_ALL_CHANNEL_INSTANCE(DMAx, Channel)); + + /* Check the DMA parameters from DMA_InitStruct */ + assert_param(IS_LL_DMA_DIRECTION(DMA_InitStruct->Direction)); + assert_param(IS_LL_DMA_MODE(DMA_InitStruct->Mode)); + assert_param(IS_LL_DMA_PERIPHINCMODE(DMA_InitStruct->PeriphOrM2MSrcIncMode)); + assert_param(IS_LL_DMA_MEMORYINCMODE(DMA_InitStruct->MemoryOrM2MDstIncMode)); + assert_param(IS_LL_DMA_PERIPHDATASIZE(DMA_InitStruct->PeriphOrM2MSrcDataSize)); + assert_param(IS_LL_DMA_MEMORYDATASIZE(DMA_InitStruct->MemoryOrM2MDstDataSize)); + assert_param(IS_LL_DMA_NBDATA(DMA_InitStruct->NbData)); + assert_param(IS_LL_DMA_PRIORITY(DMA_InitStruct->Priority)); + + /*---------------------------- DMAx CCR Configuration ------------------------ + * Configure DMAx_Channely: data transfer direction, data transfer mode, + * peripheral and memory increment mode, + * data size alignment and priority level with parameters : + * - Direction: DMA_CCR_DIR and DMA_CCR_MEM2MEM bits + * - Mode: DMA_CCR_CIRC bit + * - PeriphOrM2MSrcIncMode: DMA_CCR_PINC bit + * - MemoryOrM2MDstIncMode: DMA_CCR_MINC bit + * - PeriphOrM2MSrcDataSize: DMA_CCR_PSIZE[1:0] bits + * - MemoryOrM2MDstDataSize: DMA_CCR_MSIZE[1:0] bits + * - Priority: DMA_CCR_PL[1:0] bits + */ + LL_DMA_ConfigTransfer(DMAx, Channel, DMA_InitStruct->Direction | \ + DMA_InitStruct->Mode | \ + DMA_InitStruct->PeriphOrM2MSrcIncMode | \ + DMA_InitStruct->MemoryOrM2MDstIncMode | \ + DMA_InitStruct->PeriphOrM2MSrcDataSize | \ + DMA_InitStruct->MemoryOrM2MDstDataSize | \ + DMA_InitStruct->Priority); + + /*-------------------------- DMAx CMAR Configuration ------------------------- + * Configure the memory or destination base address with parameter : + * - MemoryOrM2MDstAddress: DMA_CMAR_MA[31:0] bits + */ + LL_DMA_SetMemoryAddress(DMAx, Channel, DMA_InitStruct->MemoryOrM2MDstAddress); + + /*-------------------------- DMAx CPAR Configuration ------------------------- + * Configure the peripheral or source base address with parameter : + * - PeriphOrM2MSrcAddress: DMA_CPAR_PA[31:0] bits + */ + LL_DMA_SetPeriphAddress(DMAx, Channel, DMA_InitStruct->PeriphOrM2MSrcAddress); + + /*--------------------------- DMAx CNDTR Configuration ----------------------- + * Configure the peripheral base address with parameter : + * - NbData: DMA_CNDTR_NDT[15:0] bits + */ + LL_DMA_SetDataLength(DMAx, Channel, DMA_InitStruct->NbData); + + + return SUCCESS; +} + +/** + * @brief Set each @ref LL_DMA_InitTypeDef field to default value. + * @param DMA_InitStruct Pointer to a @ref LL_DMA_InitTypeDef structure. + * @retval None + */ +void LL_DMA_StructInit(LL_DMA_InitTypeDef *DMA_InitStruct) +{ + /* Set DMA_InitStruct fields to default values */ + DMA_InitStruct->PeriphOrM2MSrcAddress = (uint32_t)0x00000000U; + DMA_InitStruct->MemoryOrM2MDstAddress = (uint32_t)0x00000000U; + DMA_InitStruct->Direction = LL_DMA_DIRECTION_PERIPH_TO_MEMORY; + DMA_InitStruct->Mode = LL_DMA_MODE_NORMAL; + DMA_InitStruct->PeriphOrM2MSrcIncMode = LL_DMA_PERIPH_NOINCREMENT; + DMA_InitStruct->MemoryOrM2MDstIncMode = LL_DMA_MEMORY_NOINCREMENT; + DMA_InitStruct->PeriphOrM2MSrcDataSize = LL_DMA_PDATAALIGN_BYTE; + DMA_InitStruct->MemoryOrM2MDstDataSize = LL_DMA_MDATAALIGN_BYTE; + DMA_InitStruct->NbData = (uint32_t)0x00000000U; + DMA_InitStruct->Priority = LL_DMA_PRIORITY_LOW; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* DMA1 || DMA2 */ + +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_ll_exti.c b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_ll_exti.c new file mode 100755 index 0000000..15953db --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_ll_exti.c @@ -0,0 +1,232 @@ +/** + ****************************************************************************** + * @file stm32l1xx_ll_exti.c + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief EXTI LL module driver. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ +#if defined(USE_FULL_LL_DRIVER) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_ll_exti.h" +#ifdef USE_FULL_ASSERT +#include "stm32_assert.h" +#else +#define assert_param(expr) ((void)0U) +#endif + +/** @addtogroup STM32L1xx_LL_Driver + * @{ + */ + +#if defined (EXTI) + +/** @defgroup EXTI_LL EXTI + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/** @addtogroup EXTI_LL_Private_Macros + * @{ + */ + +#define IS_LL_EXTI_LINE_0_31(__VALUE__) (((__VALUE__) & ~LL_EXTI_LINE_ALL_0_31) == 0x00000000U) + +#define IS_LL_EXTI_MODE(__VALUE__) (((__VALUE__) == LL_EXTI_MODE_IT) \ + || ((__VALUE__) == LL_EXTI_MODE_EVENT) \ + || ((__VALUE__) == LL_EXTI_MODE_IT_EVENT)) + + +#define IS_LL_EXTI_TRIGGER(__VALUE__) (((__VALUE__) == LL_EXTI_TRIGGER_NONE) \ + || ((__VALUE__) == LL_EXTI_TRIGGER_RISING) \ + || ((__VALUE__) == LL_EXTI_TRIGGER_FALLING) \ + || ((__VALUE__) == LL_EXTI_TRIGGER_RISING_FALLING)) + +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup EXTI_LL_Exported_Functions + * @{ + */ + +/** @addtogroup EXTI_LL_EF_Init + * @{ + */ + +/** + * @brief De-initialize the EXTI registers to their default reset values. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: EXTI registers are de-initialized + * - ERROR: not applicable + */ +uint32_t LL_EXTI_DeInit(void) +{ + /* Interrupt mask register set to default reset values */ + LL_EXTI_WriteReg(IMR, 0x00000000U); + /* Event mask register set to default reset values */ + LL_EXTI_WriteReg(EMR, 0x00000000U); + /* Rising Trigger selection register set to default reset values */ + LL_EXTI_WriteReg(RTSR, 0x00000000U); + /* Falling Trigger selection register set to default reset values */ + LL_EXTI_WriteReg(FTSR, 0x00000000U); + /* Software interrupt event register set to default reset values */ + LL_EXTI_WriteReg(SWIER, 0x00000000U); + /* Pending register set to default reset values */ + LL_EXTI_WriteReg(PR, 0x00FFFFFFU); + + return SUCCESS; +} + +/** + * @brief Initialize the EXTI registers according to the specified parameters in EXTI_InitStruct. + * @param EXTI_InitStruct pointer to a @ref LL_EXTI_InitTypeDef structure. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: EXTI registers are initialized + * - ERROR: not applicable + */ +uint32_t LL_EXTI_Init(LL_EXTI_InitTypeDef *EXTI_InitStruct) +{ + ErrorStatus status = SUCCESS; + /* Check the parameters */ + assert_param(IS_LL_EXTI_LINE_0_31(EXTI_InitStruct->Line_0_31)); + assert_param(IS_FUNCTIONAL_STATE(EXTI_InitStruct->LineCommand)); + assert_param(IS_LL_EXTI_MODE(EXTI_InitStruct->Mode)); + + /* ENABLE LineCommand */ + if (EXTI_InitStruct->LineCommand != DISABLE) + { + assert_param(IS_LL_EXTI_TRIGGER(EXTI_InitStruct->Trigger)); + + /* Configure EXTI Lines in range from 0 to 31 */ + if (EXTI_InitStruct->Line_0_31 != LL_EXTI_LINE_NONE) + { + switch (EXTI_InitStruct->Mode) + { + case LL_EXTI_MODE_IT: + /* First Disable Event on provided Lines */ + LL_EXTI_DisableEvent_0_31(EXTI_InitStruct->Line_0_31); + /* Then Enable IT on provided Lines */ + LL_EXTI_EnableIT_0_31(EXTI_InitStruct->Line_0_31); + break; + case LL_EXTI_MODE_EVENT: + /* First Disable IT on provided Lines */ + LL_EXTI_DisableIT_0_31(EXTI_InitStruct->Line_0_31); + /* Then Enable Event on provided Lines */ + LL_EXTI_EnableEvent_0_31(EXTI_InitStruct->Line_0_31); + break; + case LL_EXTI_MODE_IT_EVENT: + /* Directly Enable IT & Event on provided Lines */ + LL_EXTI_EnableIT_0_31(EXTI_InitStruct->Line_0_31); + LL_EXTI_EnableEvent_0_31(EXTI_InitStruct->Line_0_31); + break; + default: + status = ERROR; + break; + } + if (EXTI_InitStruct->Trigger != LL_EXTI_TRIGGER_NONE) + { + switch (EXTI_InitStruct->Trigger) + { + case LL_EXTI_TRIGGER_RISING: + /* First Disable Falling Trigger on provided Lines */ + LL_EXTI_DisableFallingTrig_0_31(EXTI_InitStruct->Line_0_31); + /* Then Enable Rising Trigger on provided Lines */ + LL_EXTI_EnableRisingTrig_0_31(EXTI_InitStruct->Line_0_31); + break; + case LL_EXTI_TRIGGER_FALLING: + /* First Disable Rising Trigger on provided Lines */ + LL_EXTI_DisableRisingTrig_0_31(EXTI_InitStruct->Line_0_31); + /* Then Enable Falling Trigger on provided Lines */ + LL_EXTI_EnableFallingTrig_0_31(EXTI_InitStruct->Line_0_31); + break; + case LL_EXTI_TRIGGER_RISING_FALLING: + LL_EXTI_EnableRisingTrig_0_31(EXTI_InitStruct->Line_0_31); + LL_EXTI_EnableFallingTrig_0_31(EXTI_InitStruct->Line_0_31); + break; + default: + status = ERROR; + break; + } + } + } + } + /* DISABLE LineCommand */ + else + { + /* De-configure EXTI Lines in range from 0 to 31 */ + LL_EXTI_DisableIT_0_31(EXTI_InitStruct->Line_0_31); + LL_EXTI_DisableEvent_0_31(EXTI_InitStruct->Line_0_31); + } + return status; +} + +/** + * @brief Set each @ref LL_EXTI_InitTypeDef field to default value. + * @param EXTI_InitStruct Pointer to a @ref LL_EXTI_InitTypeDef structure. + * @retval None + */ +void LL_EXTI_StructInit(LL_EXTI_InitTypeDef *EXTI_InitStruct) +{ + EXTI_InitStruct->Line_0_31 = LL_EXTI_LINE_NONE; + EXTI_InitStruct->LineCommand = DISABLE; + EXTI_InitStruct->Mode = LL_EXTI_MODE_IT; + EXTI_InitStruct->Trigger = LL_EXTI_TRIGGER_FALLING; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined (EXTI) */ + +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_ll_fsmc.c b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_ll_fsmc.c new file mode 100755 index 0000000..0ef84e2 --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_ll_fsmc.c @@ -0,0 +1,444 @@ +/** + ****************************************************************************** + * @file stm32l1xx_ll_fsmc.c + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief FSMC Low Layer HAL module driver. + * + * This file provides firmware functions to manage the following + * functionalities of the Flexible Static Memory Controller (FSMC) peripheral memories: + * + Initialization/de-initialization functions + * + Peripheral Control functions + * + Peripheral State functions + * + @verbatim + ============================================================================= + ##### FSMC peripheral features ##### + ============================================================================= + [..] The Flexible static memory controller (FSMC) includes following memory controllers: + (+) The NOR/PSRAM memory controller + + [..] The FSMC functional block makes the interface with synchronous and asynchronous static + memories. Its main purposes are: + (+) to translate AHB transactions into the appropriate external device protocol. + (+) to meet the access time requirements of the external memory devices. + + [..] All external memories share the addresses, data and control signals with the controller. + Each external device is accessed by means of a unique Chip Select. The FSMC performs + only one access at a time to an external device. + The main features of the FSMC controller are the following: + (+) Interface with static-memory mapped devices including: + (++) Static random access memory (SRAM). + (++) NOR Flash memory. + (++) PSRAM (4 memory banks). + (+) Independent Chip Select control for each memory bank + (+) Independent configuration for each memory bank + + @endverbatim + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_hal.h" + +/** @addtogroup STM32L1xx_HAL_Driver + * @{ + */ + +#if defined(FSMC_BANK1) + +#if defined(HAL_SRAM_MODULE_ENABLED) || defined(HAL_NOR_MODULE_ENABLED) + +/** @defgroup FSMC_LL FSMC Low Layer + * @brief FSMC driver modules + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup FSMC_LL_Private_Constants FSMC Low Layer Private Constants + * @{ + */ + +/* ----------------------- FSMC registers bit mask --------------------------- */ +/* --- BCR Register ---*/ +/* BCR register clear mask */ +#define BCR_CLEAR_MASK ((uint32_t)(FSMC_BCRx_FACCEN | FSMC_BCRx_MUXEN | \ + FSMC_BCRx_MTYP | FSMC_BCRx_MWID | \ + FSMC_BCRx_BURSTEN | FSMC_BCRx_WAITPOL | \ + FSMC_BCRx_WRAPMOD | FSMC_BCRx_WAITCFG | \ + FSMC_BCRx_WREN | FSMC_BCRx_WAITEN | \ + FSMC_BCRx_EXTMOD | FSMC_BCRx_ASYNCWAIT | \ + FSMC_BCRx_CBURSTRW)) +/* --- BTR Register ---*/ +/* BTR register clear mask */ +#define BTR_CLEAR_MASK ((uint32_t)(FSMC_BTRx_ADDSET | FSMC_BTRx_ADDHLD |\ + FSMC_BTRx_DATAST | FSMC_BTRx_BUSTURN |\ + FSMC_BTRx_CLKDIV | FSMC_BTRx_DATLAT |\ + FSMC_BTRx_ACCMOD)) + +/* --- BWTR Register ---*/ +/* BWTR register clear mask */ +#define BWTR_CLEAR_MASK ((uint32_t)(FSMC_BWTRx_ADDSET | FSMC_BWTRx_ADDHLD | \ + FSMC_BWTRx_DATAST | FSMC_BWTRx_ACCMOD | \ + FSMC_BWTRx_BUSTURN)) + +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/** @defgroup FSMC_LL_Private_Macros FSMC Low Layer Private Macros + * @{ + */ + +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup FSMC_LL_Exported_Functions FSMC Low Layer Exported Functions + * @{ + */ + +/** @defgroup FSMC_NORSRAM FSMC NORSRAM Controller functions + * @brief NORSRAM Controller functions + * + @verbatim + ============================================================================== + ##### How to use NORSRAM device driver ##### + ============================================================================== + + [..] + This driver contains a set of APIs to interface with the FSMC NORSRAM banks in order + to run the NORSRAM external devices. + + (+) FSMC NORSRAM bank reset using the function FSMC_NORSRAM_DeInit() + (+) FSMC NORSRAM bank control configuration using the function FSMC_NORSRAM_Init() + (+) FSMC NORSRAM bank timing configuration using the function FSMC_NORSRAM_Timing_Init() + (+) FSMC NORSRAM bank extended timing configuration using the function + FSMC_NORSRAM_Extended_Timing_Init() + (+) FSMC NORSRAM bank enable/disable write operation using the functions + FSMC_NORSRAM_WriteOperation_Enable()/FSMC_NORSRAM_WriteOperation_Disable() + + +@endverbatim + * @{ + */ + +/** @defgroup FSMC_NORSRAM_Group1 Initialization/de-initialization functions + * @brief Initialization and Configuration functions + * + @verbatim + ============================================================================== + ##### Initialization and de_initialization functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the FSMC NORSRAM interface + (+) De-initialize the FSMC NORSRAM interface + (+) Configure the FSMC clock and associated GPIOs + +@endverbatim + * @{ + */ + +/** + * @brief Initialize the FSMC_NORSRAM device according to the specified + * control parameters in the FSMC_NORSRAM_InitTypeDef + * @param Device Pointer to NORSRAM device instance + * @param Init Pointer to NORSRAM Initialization structure + * @retval HAL status + */ +HAL_StatusTypeDef FSMC_NORSRAM_Init(FSMC_NORSRAM_TypeDef *Device, FSMC_NORSRAM_InitTypeDef *Init) +{ + /* Check the parameters */ + assert_param(IS_FSMC_NORSRAM_DEVICE(Device)); + assert_param(IS_FSMC_NORSRAM_BANK(Init->NSBank)); + assert_param(IS_FSMC_MUX(Init->DataAddressMux)); + assert_param(IS_FSMC_MEMORY(Init->MemoryType)); + assert_param(IS_FSMC_NORSRAM_MEMORY_WIDTH(Init->MemoryDataWidth)); + assert_param(IS_FSMC_BURSTMODE(Init->BurstAccessMode)); + assert_param(IS_FSMC_WAIT_POLARITY(Init->WaitSignalPolarity)); + assert_param(IS_FSMC_WRAP_MODE(Init->WrapMode)); + assert_param(IS_FSMC_WAIT_SIGNAL_ACTIVE(Init->WaitSignalActive)); + assert_param(IS_FSMC_WRITE_OPERATION(Init->WriteOperation)); + assert_param(IS_FSMC_WAITE_SIGNAL(Init->WaitSignal)); + assert_param(IS_FSMC_EXTENDED_MODE(Init->ExtendedMode)); + assert_param(IS_FSMC_ASYNWAIT(Init->AsynchronousWait)); + assert_param(IS_FSMC_WRITE_BURST(Init->WriteBurst)); + + /* Disable NORSRAM Device */ + __FSMC_NORSRAM_DISABLE(Device, Init->NSBank); + + /* Set NORSRAM device control parameters */ + if (Init->MemoryType == FSMC_MEMORY_TYPE_NOR) + { + MODIFY_REG(Device->BTCR[Init->NSBank], BCR_CLEAR_MASK, (uint32_t)(FSMC_NORSRAM_FLASH_ACCESS_ENABLE + | Init->DataAddressMux + | Init->MemoryType + | Init->MemoryDataWidth + | Init->BurstAccessMode + | Init->WaitSignalPolarity + | Init->WrapMode + | Init->WaitSignalActive + | Init->WriteOperation + | Init->WaitSignal + | Init->ExtendedMode + | Init->AsynchronousWait + | Init->WriteBurst + ) + ); + } + else + { + MODIFY_REG(Device->BTCR[Init->NSBank], BCR_CLEAR_MASK, (uint32_t)(FSMC_NORSRAM_FLASH_ACCESS_DISABLE + | Init->DataAddressMux + | Init->MemoryType + | Init->MemoryDataWidth + | Init->BurstAccessMode + | Init->WaitSignalPolarity + | Init->WrapMode + | Init->WaitSignalActive + | Init->WriteOperation + | Init->WaitSignal + | Init->ExtendedMode + | Init->AsynchronousWait + | Init->WriteBurst + ) + ); + } + + return HAL_OK; +} + + +/** + * @brief DeInitialize the FSMC_NORSRAM peripheral + * @param Device Pointer to NORSRAM device instance + * @param ExDevice Pointer to NORSRAM extended mode device instance + * @param Bank NORSRAM bank number + * @retval HAL status + */ +HAL_StatusTypeDef FSMC_NORSRAM_DeInit(FSMC_NORSRAM_TypeDef *Device, FSMC_NORSRAM_EXTENDED_TypeDef *ExDevice, uint32_t Bank) +{ + /* Check the parameters */ + assert_param(IS_FSMC_NORSRAM_DEVICE(Device)); + assert_param(IS_FSMC_NORSRAM_EXTENDED_DEVICE(ExDevice)); + assert_param(IS_FSMC_NORSRAM_BANK(Bank)); + + /* Disable the FSMC_NORSRAM device */ + __FSMC_NORSRAM_DISABLE(Device, Bank); + + /* De-initialize the FSMC_NORSRAM device */ + /* FSMC_NORSRAM_BANK1 */ + if (Bank == FSMC_NORSRAM_BANK1) + { + Device->BTCR[Bank] = 0x000030DB; + } + /* FSMC_NORSRAM_BANK2, FSMC_NORSRAM_BANK3 or FSMC_NORSRAM_BANK4 */ + else + { + Device->BTCR[Bank] = 0x000030D2; + } + + Device->BTCR[Bank + 1] = 0x0FFFFFFF; + ExDevice->BWTR[Bank] = 0x0FFFFFFF; + + return HAL_OK; +} + + +/** + * @brief Initialize the FSMC_NORSRAM Timing according to the specified + * parameters in the FSMC_NORSRAM_TimingTypeDef + * @param Device Pointer to NORSRAM device instance + * @param Timing Pointer to NORSRAM Timing structure + * @param Bank NORSRAM bank number + * @retval HAL status + */ +HAL_StatusTypeDef FSMC_NORSRAM_Timing_Init(FSMC_NORSRAM_TypeDef *Device, FSMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank) +{ + /* Check the parameters */ + assert_param(IS_FSMC_NORSRAM_DEVICE(Device)); + assert_param(IS_FSMC_ADDRESS_SETUP_TIME(Timing->AddressSetupTime)); + assert_param(IS_FSMC_ADDRESS_HOLD_TIME(Timing->AddressHoldTime)); + assert_param(IS_FSMC_DATASETUP_TIME(Timing->DataSetupTime)); + assert_param(IS_FSMC_TURNAROUND_TIME(Timing->BusTurnAroundDuration)); + assert_param(IS_FSMC_CLK_DIV(Timing->CLKDivision)); + assert_param(IS_FSMC_DATA_LATENCY(Timing->DataLatency)); + assert_param(IS_FSMC_ACCESS_MODE(Timing->AccessMode)); + assert_param(IS_FSMC_NORSRAM_BANK(Bank)); + + /* Set FSMC_NORSRAM device timing parameters */ + MODIFY_REG(Device->BTCR[Bank + 1], \ + BTR_CLEAR_MASK, \ + (uint32_t)(Timing->AddressSetupTime | \ + ((Timing->AddressHoldTime) << POSITION_VAL(FSMC_BTRx_ADDHLD)) | \ + ((Timing->DataSetupTime) << POSITION_VAL(FSMC_BTRx_DATAST)) | \ + ((Timing->BusTurnAroundDuration) << POSITION_VAL(FSMC_BTRx_BUSTURN)) | \ + (((Timing->CLKDivision) - 1) << POSITION_VAL(FSMC_BTRx_CLKDIV)) | \ + (((Timing->DataLatency) - 2) << POSITION_VAL(FSMC_BTRx_DATLAT)) | \ + (Timing->AccessMode))); + + return HAL_OK; +} + +/** + * @brief Initialize the FSMC_NORSRAM Extended mode Timing according to the specified + * parameters in the FSMC_NORSRAM_TimingTypeDef + * @param Device Pointer to NORSRAM device instance + * @param Timing Pointer to NORSRAM Timing structure + * @param Bank NORSRAM bank number + * @param ExtendedMode FSMC Extended Mode + * This parameter can be one of the following values: + * @arg FSMC_EXTENDED_MODE_DISABLE + * @arg FSMC_EXTENDED_MODE_ENABLE + * @retval HAL status + */ +HAL_StatusTypeDef FSMC_NORSRAM_Extended_Timing_Init(FSMC_NORSRAM_EXTENDED_TypeDef *Device, FSMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank, uint32_t ExtendedMode) +{ + /* Check the parameters */ + assert_param(IS_FSMC_EXTENDED_MODE(ExtendedMode)); + + /* Set NORSRAM device timing register for write configuration, if extended mode is used */ + if (ExtendedMode == FSMC_EXTENDED_MODE_ENABLE) + { + /* Check the parameters */ + assert_param(IS_FSMC_NORSRAM_EXTENDED_DEVICE(Device)); + assert_param(IS_FSMC_ADDRESS_SETUP_TIME(Timing->AddressSetupTime)); + assert_param(IS_FSMC_ADDRESS_HOLD_TIME(Timing->AddressHoldTime)); + assert_param(IS_FSMC_DATASETUP_TIME(Timing->DataSetupTime)); + assert_param(IS_FSMC_TURNAROUND_TIME(Timing->BusTurnAroundDuration)); + assert_param(IS_FSMC_ACCESS_MODE(Timing->AccessMode)); + assert_param(IS_FSMC_NORSRAM_BANK(Bank)); + + /* Set NORSRAM device timing register for write configuration, if extended mode is used */ + MODIFY_REG(Device->BWTR[Bank], \ + BWTR_CLEAR_MASK, \ + (uint32_t)(Timing->AddressSetupTime | \ + ((Timing->AddressHoldTime) << POSITION_VAL(FSMC_BWTRx_ADDHLD)) | \ + ((Timing->DataSetupTime) << POSITION_VAL(FSMC_BWTRx_DATAST)) | \ + Timing->AccessMode | \ + ((Timing->BusTurnAroundDuration) << POSITION_VAL(FSMC_BWTRx_BUSTURN)))); + } + else + { + Device->BWTR[Bank] = 0x0FFFFFFF; + } + + return HAL_OK; +} + + +/** + * @} + */ + + +/** @defgroup FSMC_NORSRAM_Group2 Control functions + * @brief management functions + * +@verbatim + ============================================================================== + ##### FSMC_NORSRAM Control functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to control dynamically + the FSMC NORSRAM interface. + +@endverbatim + * @{ + */ + +/** + * @brief Enables dynamically FSMC_NORSRAM write operation. + * @param Device Pointer to NORSRAM device instance + * @param Bank NORSRAM bank number + * @retval HAL status + */ +HAL_StatusTypeDef FSMC_NORSRAM_WriteOperation_Enable(FSMC_NORSRAM_TypeDef *Device, uint32_t Bank) +{ + /* Check the parameters */ + assert_param(IS_FSMC_NORSRAM_DEVICE(Device)); + assert_param(IS_FSMC_NORSRAM_BANK(Bank)); + + /* Enable write operation */ + SET_BIT(Device->BTCR[Bank], FSMC_WRITE_OPERATION_ENABLE); + + return HAL_OK; +} + +/** + * @brief Disables dynamically FSMC_NORSRAM write operation. + * @param Device Pointer to NORSRAM device instance + * @param Bank NORSRAM bank number + * @retval HAL status + */ +HAL_StatusTypeDef FSMC_NORSRAM_WriteOperation_Disable(FSMC_NORSRAM_TypeDef *Device, uint32_t Bank) +{ + /* Check the parameters */ + assert_param(IS_FSMC_NORSRAM_DEVICE(Device)); + assert_param(IS_FSMC_NORSRAM_BANK(Bank)); + + /* Disable write operation */ + CLEAR_BIT(Device->BTCR[Bank], FSMC_WRITE_OPERATION_ENABLE); + + return HAL_OK; +} + +/** + * @} + */ + +/** + * @} + */ +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined(HAL_SRAM_MODULE_ENABLED) || defined(HAL_NOR_MODULE_ENABLED) */ + +#endif /* FSMC_BANK1 */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_ll_gpio.c b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_ll_gpio.c new file mode 100755 index 0000000..4f6efe5 --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_ll_gpio.c @@ -0,0 +1,305 @@ +/** + ****************************************************************************** + * @file stm32l1xx_ll_gpio.c + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief GPIO LL module driver. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ +#if defined(USE_FULL_LL_DRIVER) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_ll_gpio.h" +#include "stm32l1xx_ll_bus.h" +#ifdef USE_FULL_ASSERT +#include "stm32_assert.h" +#else +#define assert_param(expr) ((void)0U) +#endif + +/** @addtogroup STM32L1xx_LL_Driver + * @{ + */ + +#if defined (GPIOA) || defined (GPIOB) || defined (GPIOC) || defined (GPIOD) || defined (GPIOE) || defined (GPIOF) || defined (GPIOG) || defined (GPIOH) + +/** @addtogroup GPIO_LL + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/** @addtogroup GPIO_LL_Private_Macros + * @{ + */ +#define IS_LL_GPIO_PIN(__VALUE__) ((((uint32_t)0x00000000U) < (__VALUE__)) && ((__VALUE__) <= (LL_GPIO_PIN_ALL))) + +#define IS_LL_GPIO_MODE(__VALUE__) (((__VALUE__) == LL_GPIO_MODE_INPUT) ||\ + ((__VALUE__) == LL_GPIO_MODE_OUTPUT) ||\ + ((__VALUE__) == LL_GPIO_MODE_ALTERNATE) ||\ + ((__VALUE__) == LL_GPIO_MODE_ANALOG)) + +#define IS_LL_GPIO_OUTPUT_TYPE(__VALUE__) (((__VALUE__) == LL_GPIO_OUTPUT_PUSHPULL) ||\ + ((__VALUE__) == LL_GPIO_OUTPUT_OPENDRAIN)) + +#define IS_LL_GPIO_SPEED(__VALUE__) (((__VALUE__) == LL_GPIO_SPEED_FREQ_LOW) ||\ + ((__VALUE__) == LL_GPIO_SPEED_FREQ_MEDIUM) ||\ + ((__VALUE__) == LL_GPIO_SPEED_FREQ_HIGH) ||\ + ((__VALUE__) == LL_GPIO_SPEED_FREQ_VERY_HIGH)) + +#define IS_LL_GPIO_PULL(__VALUE__) (((__VALUE__) == LL_GPIO_PULL_NO) ||\ + ((__VALUE__) == LL_GPIO_PULL_UP) ||\ + ((__VALUE__) == LL_GPIO_PULL_DOWN)) + +#define IS_LL_GPIO_ALTERNATE(__VALUE__) (((__VALUE__) == LL_GPIO_AF_0 ) ||\ + ((__VALUE__) == LL_GPIO_AF_1 ) ||\ + ((__VALUE__) == LL_GPIO_AF_2 ) ||\ + ((__VALUE__) == LL_GPIO_AF_3 ) ||\ + ((__VALUE__) == LL_GPIO_AF_4 ) ||\ + ((__VALUE__) == LL_GPIO_AF_5 ) ||\ + ((__VALUE__) == LL_GPIO_AF_6 ) ||\ + ((__VALUE__) == LL_GPIO_AF_7 ) ||\ + ((__VALUE__) == LL_GPIO_AF_8 ) ||\ + ((__VALUE__) == LL_GPIO_AF_9 ) ||\ + ((__VALUE__) == LL_GPIO_AF_10 ) ||\ + ((__VALUE__) == LL_GPIO_AF_11 ) ||\ + ((__VALUE__) == LL_GPIO_AF_12 ) ||\ + ((__VALUE__) == LL_GPIO_AF_13 ) ||\ + ((__VALUE__) == LL_GPIO_AF_14 ) ||\ + ((__VALUE__) == LL_GPIO_AF_15 )) +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup GPIO_LL_Exported_Functions + * @{ + */ + +/** @addtogroup GPIO_LL_EF_Init + * @{ + */ + +/** + * @brief De-initialize GPIO registers (Registers restored to their default values). + * @param GPIOx GPIO Port + * @retval An ErrorStatus enumeration value: + * - SUCCESS: GPIO registers are de-initialized + * - ERROR: Wrong GPIO Port + */ +ErrorStatus LL_GPIO_DeInit(GPIO_TypeDef *GPIOx) +{ + ErrorStatus status = SUCCESS; + + /* Check the parameters */ + assert_param(IS_GPIO_ALL_INSTANCE(GPIOx)); + + /* Force and Release reset on clock of GPIOx Port */ + if (GPIOx == GPIOA) + { + LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_GPIOA); + LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_GPIOA); + } + else if (GPIOx == GPIOB) + { + LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_GPIOB); + LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_GPIOB); + } + else if (GPIOx == GPIOC) + { + LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_GPIOC); + LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_GPIOC); + } +#if defined(GPIOD) + else if (GPIOx == GPIOD) + { + LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_GPIOD); + LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_GPIOD); + } +#endif /* GPIOD */ +#if defined(GPIOE) + else if (GPIOx == GPIOE) + { + LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_GPIOE); + LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_GPIOE); + } +#endif /* GPIOE */ +#if defined(GPIOF) + else if (GPIOx == GPIOF) + { + LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_GPIOF); + LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_GPIOF); + } +#endif /* GPIOF */ +#if defined(GPIOG) + else if (GPIOx == GPIOG) + { + LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_GPIOG); + LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_GPIOG); + } +#endif /* GPIOG */ +#if defined(GPIOH) + else if (GPIOx == GPIOH) + { + LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_GPIOH); + LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_GPIOH); + } +#endif /* GPIOH */ + else + { + status = ERROR; + } + + return (status); +} + +/** + * @brief Initialize GPIO registers according to the specified parameters in GPIO_InitStruct. + * @param GPIOx GPIO Port + * @param GPIO_InitStruct: pointer to a @ref LL_GPIO_InitTypeDef structure + * that contains the configuration information for the specified GPIO peripheral. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: GPIO registers are initialized according to GPIO_InitStruct content + * - ERROR: Not applicable + */ +ErrorStatus LL_GPIO_Init(GPIO_TypeDef *GPIOx, LL_GPIO_InitTypeDef *GPIO_InitStruct) +{ + uint32_t pinpos = 0x00000000U; + uint32_t currentpin = 0x00000000U; + + /* Check the parameters */ + assert_param(IS_GPIO_ALL_INSTANCE(GPIOx)); + assert_param(IS_LL_GPIO_PIN(GPIO_InitStruct->Pin)); + assert_param(IS_LL_GPIO_MODE(GPIO_InitStruct->Mode)); + assert_param(IS_LL_GPIO_PULL(GPIO_InitStruct->Pull)); + + /* ------------------------- Configure the port pins ---------------- */ + /* Initialize pinpos on first pin set */ + pinpos = POSITION_VAL(GPIO_InitStruct->Pin); + + /* Configure the port pins */ + while (((GPIO_InitStruct->Pin) >> pinpos) != 0x00000000U) + { + /* Get current io position */ + currentpin = (GPIO_InitStruct->Pin) & (0x00000001U << pinpos); + + if (currentpin) + { + /* Pin Mode configuration */ + LL_GPIO_SetPinMode(GPIOx, currentpin, GPIO_InitStruct->Mode); + + if ((GPIO_InitStruct->Mode == LL_GPIO_MODE_OUTPUT) || (GPIO_InitStruct->Mode == LL_GPIO_MODE_ALTERNATE)) + { + /* Check Speed mode parameters */ + assert_param(IS_LL_GPIO_SPEED(GPIO_InitStruct->Speed)); + + /* Speed mode configuration */ + LL_GPIO_SetPinSpeed(GPIOx, currentpin, GPIO_InitStruct->Speed); + } + + /* Pull-up Pull down resistor configuration*/ + LL_GPIO_SetPinPull(GPIOx, currentpin, GPIO_InitStruct->Pull); + + if (GPIO_InitStruct->Mode == LL_GPIO_MODE_ALTERNATE) + { + /* Check Alternate parameter */ + assert_param(IS_LL_GPIO_ALTERNATE(GPIO_InitStruct->Alternate)); + + /* Speed mode configuration */ + if (POSITION_VAL(currentpin) < 0x00000008U) + { + LL_GPIO_SetAFPin_0_7(GPIOx, currentpin, GPIO_InitStruct->Alternate); + } + else + { + LL_GPIO_SetAFPin_8_15(GPIOx, currentpin, GPIO_InitStruct->Alternate); + } + } + } + pinpos++; + } + + if ((GPIO_InitStruct->Mode == LL_GPIO_MODE_OUTPUT) || (GPIO_InitStruct->Mode == LL_GPIO_MODE_ALTERNATE)) + { + /* Check Output mode parameters */ + assert_param(IS_LL_GPIO_OUTPUT_TYPE(GPIO_InitStruct->OutputType)); + + /* Output mode configuration*/ + LL_GPIO_SetPinOutputType(GPIOx, GPIO_InitStruct->Pin, GPIO_InitStruct->OutputType); + + } + return (SUCCESS); +} + +/** + * @brief Set each @ref LL_GPIO_InitTypeDef field to default value. + * @param GPIO_InitStruct: pointer to a @ref LL_GPIO_InitTypeDef structure + * whose fields will be set to default values. + * @retval None + */ + +void LL_GPIO_StructInit(LL_GPIO_InitTypeDef *GPIO_InitStruct) +{ + /* Reset GPIO init structure parameters values */ + GPIO_InitStruct->Pin = LL_GPIO_PIN_ALL; + GPIO_InitStruct->Mode = LL_GPIO_MODE_ANALOG; + GPIO_InitStruct->Speed = LL_GPIO_SPEED_FREQ_LOW; + GPIO_InitStruct->OutputType = LL_GPIO_OUTPUT_PUSHPULL; + GPIO_InitStruct->Pull = LL_GPIO_PULL_NO; + GPIO_InitStruct->Alternate = LL_GPIO_AF_0; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined (GPIOA) || defined (GPIOB) || defined (GPIOC) || defined (GPIOD) || defined (GPIOE) || defined (GPIOF) || defined (GPIOG) || defined (GPIOH) */ + +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_ll_i2c.c b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_ll_i2c.c new file mode 100755 index 0000000..9638f43 --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_ll_i2c.c @@ -0,0 +1,237 @@ +/** + ****************************************************************************** + * @file stm32l1xx_ll_i2c.c + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief I2C LL module driver. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ +#if defined(USE_FULL_LL_DRIVER) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_ll_i2c.h" +#include "stm32l1xx_ll_bus.h" +#include "stm32l1xx_ll_rcc.h" +#ifdef USE_FULL_ASSERT +#include "stm32_assert.h" +#else +#define assert_param(expr) ((void)0U) +#endif + +/** @addtogroup STM32L1xx_LL_Driver + * @{ + */ + +#if defined (I2C1) || defined (I2C2) + +/** @defgroup I2C_LL I2C + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/** @addtogroup I2C_LL_Private_Macros + * @{ + */ + +#define IS_LL_I2C_PERIPHERAL_MODE(__VALUE__) (((__VALUE__) == LL_I2C_MODE_I2C) || \ + ((__VALUE__) == LL_I2C_MODE_SMBUS_HOST) || \ + ((__VALUE__) == LL_I2C_MODE_SMBUS_DEVICE) || \ + ((__VALUE__) == LL_I2C_MODE_SMBUS_DEVICE_ARP)) + +#define IS_I2C_CLOCK_SPEED(__VALUE__) (((__VALUE__) > 0) && ((__VALUE__) <= LL_I2C_MAX_SPEED_FAST)) + +#define IS_I2C_DUTY_CYCLE(__VALUE__) (((__VALUE__) == LL_I2C_DUTYCYCLE_2) || \ + ((__VALUE__) == LL_I2C_DUTYCYCLE_16_9)) + +#define IS_LL_I2C_OWN_ADDRESS1(__VALUE__) ((__VALUE__) <= (uint32_t)0x000003FFU) + +#define IS_LL_I2C_TYPE_ACKNOWLEDGE(__VALUE__) (((__VALUE__) == LL_I2C_ACK) || \ + ((__VALUE__) == LL_I2C_NACK)) + +#define IS_LL_I2C_OWN_ADDRSIZE(__VALUE__) (((__VALUE__) == LL_I2C_OWNADDRESS1_7BIT) || \ + ((__VALUE__) == LL_I2C_OWNADDRESS1_10BIT)) +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup I2C_LL_Exported_Functions + * @{ + */ + +/** @addtogroup I2C_LL_EF_Init + * @{ + */ + +/** + * @brief De-initialize the I2C registers to their default reset values. + * @param I2Cx I2C Instance. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: I2C registers are de-initialized + * - ERROR: I2C registers are not de-initialized + */ +uint32_t LL_I2C_DeInit(I2C_TypeDef *I2Cx) +{ + ErrorStatus status = SUCCESS; + + /* Check the I2C Instance I2Cx */ + assert_param(IS_I2C_ALL_INSTANCE(I2Cx)); + + if (I2Cx == I2C1) + { + /* Force reset of I2C clock */ + LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_I2C1); + + /* Release reset of I2C clock */ + LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_I2C1); + } + else if (I2Cx == I2C2) + { + /* Force reset of I2C clock */ + LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_I2C2); + + /* Release reset of I2C clock */ + LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_I2C2); + + } + else + { + status = ERROR; + } + + return status; +} + +/** + * @brief Initialize the I2C registers according to the specified parameters in I2C_InitStruct. + * @param I2Cx I2C Instance. + * @param I2C_InitStruct pointer to a @ref LL_I2C_InitTypeDef structure. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: I2C registers are initialized + * - ERROR: Not applicable + */ +uint32_t LL_I2C_Init(I2C_TypeDef *I2Cx, LL_I2C_InitTypeDef *I2C_InitStruct) +{ + LL_RCC_ClocksTypeDef rcc_clocks; + + /* Check the I2C Instance I2Cx */ + assert_param(IS_I2C_ALL_INSTANCE(I2Cx)); + + /* Check the I2C parameters from I2C_InitStruct */ + assert_param(IS_LL_I2C_PERIPHERAL_MODE(I2C_InitStruct->PeripheralMode)); + assert_param(IS_I2C_CLOCK_SPEED(I2C_InitStruct->ClockSpeed)); + assert_param(IS_I2C_DUTY_CYCLE(I2C_InitStruct->DutyCycle)); + assert_param(IS_LL_I2C_OWN_ADDRESS1(I2C_InitStruct->OwnAddress1)); + assert_param(IS_LL_I2C_TYPE_ACKNOWLEDGE(I2C_InitStruct->TypeAcknowledge)); + assert_param(IS_LL_I2C_OWN_ADDRSIZE(I2C_InitStruct->OwnAddrSize)); + + /* Disable the selected I2Cx Peripheral */ + LL_I2C_Disable(I2Cx); + + /* Retrieve Clock frequencies */ + LL_RCC_GetSystemClocksFreq(&rcc_clocks); + + /*---------------------------- I2Cx SCL Clock Speed Configuration ------------ + * Configure the SCL speed : + * - ClockSpeed: I2C_CR2_FREQ[5:0], I2C_TRISE_TRISE[5:0], I2C_CCR_FS, + * and I2C_CCR_CCR[11:0] bits + * - DutyCycle: I2C_CCR_DUTY[7:0] bits + */ + LL_I2C_ConfigSpeed(I2Cx, rcc_clocks.PCLK1_Frequency, I2C_InitStruct->ClockSpeed, I2C_InitStruct->DutyCycle); + + /*---------------------------- I2Cx OAR1 Configuration ----------------------- + * Disable, Configure and Enable I2Cx device own address 1 with parameters : + * - OwnAddress1: I2C_OAR1_ADD[9:8], I2C_OAR1_ADD[7:1] and I2C_OAR1_ADD0 bits + * - OwnAddrSize: I2C_OAR1_ADDMODE bit + */ + LL_I2C_SetOwnAddress1(I2Cx, I2C_InitStruct->OwnAddress1, I2C_InitStruct->OwnAddrSize); + + /*---------------------------- I2Cx MODE Configuration ----------------------- + * Configure I2Cx peripheral mode with parameter : + * - PeripheralMode: I2C_CR1_SMBUS, I2C_CR1_SMBTYPE and I2C_CR1_ENARP bits + */ + LL_I2C_SetMode(I2Cx, I2C_InitStruct->PeripheralMode); + + /* Enable the selected I2Cx Peripheral */ + LL_I2C_Enable(I2Cx); + + /*---------------------------- I2Cx CR2 Configuration ------------------------ + * Configure the ACKnowledge or Non ACKnowledge condition + * after the address receive match code or next received byte with parameter : + * - TypeAcknowledge: I2C_CR2_NACK bit + */ + LL_I2C_AcknowledgeNextData(I2Cx, I2C_InitStruct->TypeAcknowledge); + + return SUCCESS; +} + +/** + * @brief Set each @ref LL_I2C_InitTypeDef field to default value. + * @param I2C_InitStruct Pointer to a @ref LL_I2C_InitTypeDef structure. + * @retval None + */ +void LL_I2C_StructInit(LL_I2C_InitTypeDef *I2C_InitStruct) +{ + /* Set I2C_InitStruct fields to default values */ + I2C_InitStruct->PeripheralMode = LL_I2C_MODE_I2C; + I2C_InitStruct->ClockSpeed = 5000U; + I2C_InitStruct->DutyCycle = LL_I2C_DUTYCYCLE_2; + I2C_InitStruct->OwnAddress1 = 0U; + I2C_InitStruct->TypeAcknowledge = LL_I2C_NACK; + I2C_InitStruct->OwnAddrSize = LL_I2C_OWNADDRESS1_7BIT; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* I2C1 || I2C2 */ + +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_ll_opamp.c b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_ll_opamp.c new file mode 100755 index 0000000..6b05af5 --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_ll_opamp.c @@ -0,0 +1,298 @@ +/** + ****************************************************************************** + * @file stm32l1xx_ll_opamp.c + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief OPAMP LL module driver + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ +#if defined(USE_FULL_LL_DRIVER) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_ll_opamp.h" + +#ifdef USE_FULL_ASSERT + #include "stm32_assert.h" +#else + #define assert_param(expr) ((void)0U) +#endif + +/** @addtogroup STM32L1xx_LL_Driver + * @{ + */ + +#if defined (OPAMP1) || defined (OPAMP2) || defined (OPAMP3) + +/** @addtogroup OPAMP_LL OPAMP + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ + +/** @addtogroup OPAMP_LL_Private_Macros + * @{ + */ + +/* Check of parameters for configuration of OPAMP hierarchical scope: */ +/* OPAMP instance. */ + +#define IS_LL_OPAMP_POWER_MODE(__POWER_MODE__) \ + ( ((__POWER_MODE__) == LL_OPAMP_POWERMODE_NORMAL) \ + || ((__POWER_MODE__) == LL_OPAMP_POWERMODE_LOWPOWER)) + +#define IS_LL_OPAMP_FUNCTIONAL_MODE(__FUNCTIONAL_MODE__) \ + ( ((__FUNCTIONAL_MODE__) == LL_OPAMP_MODE_STANDALONE) \ + || ((__FUNCTIONAL_MODE__) == LL_OPAMP_MODE_FOLLOWER) \ + ) + +/* Note: Comparator non-inverting inputs parameters are different */ +/* depending on OPAMP instance. */ +#if defined(OPAMP3) +#define IS_LL_OPAMP_INPUT_NONINVERTING(__OPAMPX__, __INPUT_NONINVERTING__) \ + (((__OPAMPX__) == OPAMP1) \ + ? ( \ + ((__INPUT_NONINVERTING__) == LL_OPAMP_INPUT_NONINVERT_IO0) \ + || ((__INPUT_NONINVERTING__) == LL_OPAMP_INPUT_NONINV_DAC1_CH1) \ + ) \ + : \ + (((__OPAMPX__) == OPAMP2) \ + ? ( \ + ((__INPUT_NONINVERTING__) == LL_OPAMP_INPUT_NONINVERT_IO0) \ + || ((__INPUT_NONINVERTING__) == LL_OPAMP_INPUT_NONINV_DAC1_CH1) \ + || ((__INPUT_NONINVERTING__) == LL_OPAMP_INPUT_NONINV_DAC1_CH2) \ + ) \ + : \ + ( \ + ((__INPUT_NONINVERTING__) == LL_OPAMP_INPUT_NONINVERT_IO0) \ + || ((__INPUT_NONINVERTING__) == LL_OPAMP_INPUT_NONINV_DAC1_CH2_OPAMP3) \ + ) \ + ) \ + ) +#else +#define IS_LL_OPAMP_INPUT_NONINVERTING(__OPAMPX__, __INPUT_NONINVERTING__) \ + (((__OPAMPX__) == OPAMP1) \ + ? ( \ + ((__INPUT_NONINVERTING__) == LL_OPAMP_INPUT_NONINVERT_IO0) \ + || ((__INPUT_NONINVERTING__) == LL_OPAMP_INPUT_NONINV_DAC1_CH1) \ + ) \ + : \ + ( \ + ((__INPUT_NONINVERTING__) == LL_OPAMP_INPUT_NONINVERT_IO0) \ + || ((__INPUT_NONINVERTING__) == LL_OPAMP_INPUT_NONINV_DAC1_CH1) \ + || ((__INPUT_NONINVERTING__) == LL_OPAMP_INPUT_NONINV_DAC1_CH2) \ + ) \ + ) +#endif + +/* Note: Comparator non-inverting inputs parameters are the same on all */ +/* OPAMP instances. */ +/* However, comparator instance kept as macro parameter for */ +/* compatibility with other STM32 families. */ +#define IS_LL_OPAMP_INPUT_INVERTING(__OPAMPX__, __INPUT_INVERTING__) \ + ( ((__INPUT_INVERTING__) == LL_OPAMP_INPUT_INVERT_IO0) \ + || ((__INPUT_INVERTING__) == LL_OPAMP_INPUT_INVERT_IO1) \ + || ((__INPUT_INVERTING__) == LL_OPAMP_INPUT_INVERT_CONNECT_NO) \ + ) + +/** + * @} + */ + + +/* Private function prototypes -----------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup OPAMP_LL_Exported_Functions + * @{ + */ + +/** @addtogroup OPAMP_LL_EF_Init + * @{ + */ + +/** + * @brief De-initialize registers of the selected OPAMP instance + * to their default reset values. + * @param OPAMPx OPAMP instance + * @retval An ErrorStatus enumeration value: + * - SUCCESS: OPAMP registers are de-initialized + * - ERROR: OPAMP registers are not de-initialized + */ +ErrorStatus LL_OPAMP_DeInit(OPAMP_TypeDef* OPAMPx) +{ + ErrorStatus status = SUCCESS; + + /* Check the parameters */ + assert_param(IS_OPAMP_ALL_INSTANCE(OPAMPx)); + + MODIFY_REG(OPAMP->CSR, + (OPAMP_CSR_S3SEL1 | OPAMP_CSR_S4SEL1 | OPAMP_CSR_S5SEL1 | OPAMP_CSR_S6SEL1 | OPAMP_CSR_OPA1CAL_L | OPAMP_CSR_OPA1CAL_H | OPAMP_CSR_OPA1LPM) << __OPAMP_INSTANCE_BITOFFSET(OPAMPx) + | (OPAMP_CSR_ANAWSEL1) << __OPAMP_INSTANCE_DECIMAL(OPAMPx) + | (OPAMP_CSR_S7SEL2 * __OPAMP_IS_INSTANCE_OPAMP2(OPAMPx)) , + (OPAMP_CSR_OPA1PD) << __OPAMP_INSTANCE_BITOFFSET(OPAMPx) + ); + return status; +} + +/** + * @brief Initialize some features of OPAMP instance. + * @note This function reset bit of calibration mode to ensure + * to be in functional mode, in order to have OPAMP parameters + * (inputs selection, ...) set with the corresponding OPAMP mode + * to be effective. + * @note This function configures features of the selected OPAMP instance. + * Some features are also available at scope OPAMP common instance + * (common to several OPAMP instances). + * Refer to functions having argument "OPAMPxy_COMMON" as parameter. + * @param OPAMPx OPAMP instance + * @param OPAMP_InitStruct Pointer to a @ref LL_OPAMP_InitTypeDef structure + * @retval An ErrorStatus enumeration value: + * - SUCCESS: OPAMP registers are initialized + * - ERROR: OPAMP registers are not initialized + */ +ErrorStatus LL_OPAMP_Init(OPAMP_TypeDef *OPAMPx, LL_OPAMP_InitTypeDef *OPAMP_InitStruct) +{ + /* Check the parameters */ + assert_param(IS_OPAMP_ALL_INSTANCE(OPAMPx)); + assert_param(IS_LL_OPAMP_POWER_MODE(OPAMP_InitStruct->PowerMode)); + assert_param(IS_LL_OPAMP_FUNCTIONAL_MODE(OPAMP_InitStruct->FunctionalMode)); + assert_param(IS_LL_OPAMP_INPUT_NONINVERTING(OPAMPx, OPAMP_InitStruct->InputNonInverting)); + + /* Note: OPAMP inverting input can be used with OPAMP in mode standalone. */ + /* Otherwise (OPAMP in mode follower), OPAMP inverting input is */ + /* not used (not connected to GPIO pin). */ + if(OPAMP_InitStruct->FunctionalMode != LL_OPAMP_MODE_FOLLOWER) + { + assert_param(IS_LL_OPAMP_INPUT_INVERTING(OPAMPx, OPAMP_InitStruct->InputInverting)); + } + + /* Configuration of OPAMP instance : */ + /* - PowerMode */ + /* - Functional mode */ + /* - Input non-inverting */ + /* - Input inverting */ + /* Note: Bits OPAMP_CSR_OPAxCAL_y reset to ensure to be in functional mode */ + if(OPAMP_InitStruct->FunctionalMode != LL_OPAMP_MODE_FOLLOWER) + { + MODIFY_REG(OPAMP->CSR, + (( + OPAMP_CSR_OPA1LPM + | OPAMP_CSR_S3SEL1 + | OPAMP_CSR_OPA1CAL_H + | OPAMP_CSR_OPA1CAL_L + | OPAMP_CSR_S5SEL1 + | OPAMP_CSR_S6SEL1 + | OPAMP_CSR_S4SEL1 + ) << __OPAMP_INSTANCE_BITOFFSET(OPAMPx) + ) + | ((OPAMP_CSR_ANAWSEL1) << __OPAMP_INSTANCE_DECIMAL(OPAMPx)) + | (OPAMP_CSR_S7SEL2 * __OPAMP_IS_INSTANCE_OPAMP2(OPAMPx)) + , + (( + (OPAMP_InitStruct->PowerMode & OPAMP_POWERMODE_CSR_BIT_MASK) + | OPAMP_InitStruct->FunctionalMode + | OPAMP_InitStruct->InputNonInverting + | (OPAMP_InitStruct->InputInverting & OPAMP_CSR_S4SEL1) + ) << __OPAMP_INSTANCE_BITOFFSET(OPAMPx) + ) + | ((OPAMP_InitStruct->InputInverting & OPAMP_CSR_ANAWSEL1) << __OPAMP_INSTANCE_DECIMAL(OPAMPx)) + | ((OPAMP_InitStruct->InputNonInverting & OPAMP_CSR_S7SEL2) * __OPAMP_IS_INSTANCE_OPAMP2(OPAMPx)) + ); + } + else + { + MODIFY_REG(OPAMP->CSR, + (( + OPAMP_CSR_OPA1LPM + | OPAMP_CSR_OPA1CAL_H + | OPAMP_CSR_OPA1CAL_L + | OPAMP_CSR_S5SEL1 + | OPAMP_CSR_S6SEL1 + | OPAMP_CSR_S4SEL1 + ) << __OPAMP_INSTANCE_BITOFFSET(OPAMPx) + ) + | ((OPAMP_CSR_ANAWSEL1) << __OPAMP_INSTANCE_DECIMAL(OPAMPx)) + | (OPAMP_CSR_S7SEL2 * __OPAMP_IS_INSTANCE_OPAMP2(OPAMPx)) + , + (( + (OPAMP_InitStruct->PowerMode & OPAMP_POWERMODE_CSR_BIT_MASK) + | OPAMP_InitStruct->FunctionalMode + | OPAMP_InitStruct->InputNonInverting + | OPAMP_CSR_S3SEL1 + ) << __OPAMP_INSTANCE_BITOFFSET(OPAMPx) + ) + | ((OPAMP_InitStruct->InputNonInverting & OPAMP_CSR_S7SEL2) * __OPAMP_IS_INSTANCE_OPAMP2(OPAMPx)) + ); + } + return SUCCESS; +} + +/** + * @brief Set each @ref LL_OPAMP_InitTypeDef field to default value. + * @param OPAMP_InitStruct pointer to a @ref LL_OPAMP_InitTypeDef structure + * whose fields will be set to default values. + * @retval None + */ +void LL_OPAMP_StructInit(LL_OPAMP_InitTypeDef *OPAMP_InitStruct) +{ + /* Set OPAMP_InitStruct fields to default values */ + OPAMP_InitStruct->PowerMode = LL_OPAMP_POWERMODE_NORMAL; + OPAMP_InitStruct->FunctionalMode = LL_OPAMP_MODE_FOLLOWER; + OPAMP_InitStruct->InputNonInverting = LL_OPAMP_INPUT_NONINVERT_IO0; + /* Note: Parameter discarded if OPAMP in functional mode follower, */ + /* set anyway to its default value. */ + OPAMP_InitStruct->InputInverting = LL_OPAMP_INPUT_INVERT_CONNECT_NO; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* OPAMP1 || OPAMP2 || OPAMP3 */ + +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_ll_pwr.c b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_ll_pwr.c new file mode 100755 index 0000000..6744508 --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_ll_pwr.c @@ -0,0 +1,103 @@ +/** + ****************************************************************************** + * @file stm32l1xx_ll_pwr.c + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief PWR LL module driver. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ +#if defined(USE_FULL_LL_DRIVER) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_ll_pwr.h" +#include "stm32l1xx_ll_bus.h" + +/** @addtogroup STM32L1xx_LL_Driver + * @{ + */ + +#if defined(PWR) + +/** @defgroup PWR_LL PWR + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup PWR_LL_Exported_Functions + * @{ + */ + +/** @addtogroup PWR_LL_EF_Init + * @{ + */ + +/** + * @brief De-initialize the PWR registers to their default reset values. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: PWR registers are de-initialized + * - ERROR: not applicable + */ +ErrorStatus LL_PWR_DeInit(void) +{ + /* Force reset of PWR clock */ + LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_PWR); + + /* Release reset of PWR clock */ + LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_PWR); + + return SUCCESS; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +#endif /* defined(PWR) */ +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_ll_rcc.c b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_ll_rcc.c new file mode 100755 index 0000000..8337696 --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_ll_rcc.c @@ -0,0 +1,320 @@ +/** + ****************************************************************************** + * @file stm32l1xx_ll_rcc.c + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief RCC LL module driver. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ +#if defined(USE_FULL_LL_DRIVER) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_ll_rcc.h" +/** @addtogroup STM32L1xx_LL_Driver + * @{ + */ + +#if defined(RCC) + +/** @defgroup RCC_LL RCC + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup RCC_LL_Private_Functions RCC Private functions + * @{ + */ +uint32_t RCC_GetSystemClockFreq(void); +uint32_t RCC_GetHCLKClockFreq(uint32_t SYSCLK_Frequency); +uint32_t RCC_GetPCLK1ClockFreq(uint32_t HCLK_Frequency); +uint32_t RCC_GetPCLK2ClockFreq(uint32_t HCLK_Frequency); +uint32_t RCC_PLL_GetFreqDomain_SYS(void); +/** + * @} + */ + + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup RCC_LL_Exported_Functions + * @{ + */ + +/** @addtogroup RCC_LL_EF_Init + * @{ + */ + +/** + * @brief Reset the RCC clock configuration to the default reset state. + * @note The default reset state of the clock configuration is given below: + * - MSI ON and used as system clock source + * - HSE, HSI and PLL OFF + * - AHB, APB1 and APB2 prescaler set to 1. + * - CSS, MCO OFF + * - All interrupts disabled + * @note This function doesn't modify the configuration of the + * - Peripheral clocks + * - LSI, LSE and RTC clocks + * @retval An ErrorStatus enumeration value: + * - SUCCESS: RCC registers are de-initialized + * - ERROR: not applicable + */ +ErrorStatus LL_RCC_DeInit(void) +{ + uint32_t vl_mask = 0U; + + /* Set MSION bit */ + LL_RCC_MSI_Enable(); + + /* Insure MSIRDY bit is set before writing default MSIRANGE value */ + while (LL_RCC_MSI_IsReady() == 0U) + { + __NOP(); + } + + /* Set MSIRANGE default value */ + LL_RCC_MSI_SetRange(LL_RCC_MSIRANGE_5); + /* Set MSITRIM bits to the reset value*/ + LL_RCC_MSI_SetCalibTrimming(0U); + + /* Set HSITRIM bits to the reset value*/ + LL_RCC_HSI_SetCalibTrimming(0x10U); + + /* Reset SW, HPRE, PPRE and MCOSEL bits */ + vl_mask = 0xFFFFFFFFU; + CLEAR_BIT(vl_mask, (RCC_CFGR_SW | RCC_CFGR_HPRE | RCC_CFGR_PPRE1 | RCC_CFGR_PPRE2 | RCC_CFGR_MCOSEL)); + LL_RCC_WriteReg(CFGR, vl_mask); + + /* Reset HSION, HSEON, CSSON, PLLON bits */ + vl_mask = 0xFFFFFFFFU; + CLEAR_BIT(vl_mask, (RCC_CR_PLLON | RCC_CR_CSSON | RCC_CR_HSEON | RCC_CR_HSION)); + LL_RCC_WriteReg(CR, vl_mask); + + /* Reset HSEBYP bit */ + LL_RCC_HSE_DisableBypass(); + + /* Reset CFGR register */ + LL_RCC_WriteReg(CFGR, 0x00000000U); + + + /* Clear pending flags */ +#if defined(RCC_LSECSS_SUPPORT) + vl_mask = (LL_RCC_CIR_LSIRDYC | LL_RCC_CIR_LSERDYC | LL_RCC_CIR_HSIRDYC | LL_RCC_CIR_HSERDYC | LL_RCC_CIR_PLLRDYC | LL_RCC_CIR_MSIRDYC | LL_RCC_CIR_LSECSSC | LL_RCC_CIR_CSSC); +#else + vl_mask = (LL_RCC_CIR_LSIRDYC | LL_RCC_CIR_LSERDYC | LL_RCC_CIR_HSIRDYC | LL_RCC_CIR_HSERDYC | LL_RCC_CIR_PLLRDYC | LL_RCC_CIR_MSIRDYC | LL_RCC_CIR_CSSC); +#endif /* RCC_LSECSS_SUPPORT */ + SET_BIT(RCC->CIR, vl_mask); + + /* Disable all interrupts */ + LL_RCC_WriteReg(CIR, 0x00000000U); + + return SUCCESS; +} + +/** + * @} + */ + +/** @addtogroup RCC_LL_EF_Get_Freq + * @brief Return the frequencies of different on chip clocks; System, AHB, APB1 and APB2 buses clocks + * and different peripheral clocks available on the device. + * @note If SYSCLK source is MSI, function returns values based on MSI clock(*) + * @note If SYSCLK source is HSI, function returns values based on HSI_VALUE(**) + * @note If SYSCLK source is HSE, function returns values based on HSE_VALUE(***) + * @note If SYSCLK source is PLL, function returns values based on + * HSI_VALUE(**) or HSE_VALUE(***) multiplied/divided by the PLL factors. + * @note (*) MSI clock depends on the selected MSI range but the real value + * may vary depending on the variations in voltage and temperature. + * @note (**) HSI_VALUE is a defined constant but the real value may vary + * depending on the variations in voltage and temperature. + * @note (***) HSE_VALUE is a defined constant, user has to ensure that + * HSE_VALUE is same as the real frequency of the crystal used. + * Otherwise, this function may have wrong result. + * @note The result of this function could be incorrect when using fractional + * value for HSE crystal. + * @note This function can be used by the user application to compute the + * baud-rate for the communication peripherals or configure other parameters. + * @{ + */ + +/** + * @brief Return the frequencies of different on chip clocks; System, AHB, APB1 and APB2 buses clocks + * @note Each time SYSCLK, HCLK, PCLK1 and/or PCLK2 clock changes, this function + * must be called to update structure fields. Otherwise, any + * configuration based on this function will be incorrect. + * @param RCC_Clocks pointer to a @ref LL_RCC_ClocksTypeDef structure which will hold the clocks frequencies + * @retval None + */ +void LL_RCC_GetSystemClocksFreq(LL_RCC_ClocksTypeDef *RCC_Clocks) +{ + /* Get SYSCLK frequency */ + RCC_Clocks->SYSCLK_Frequency = RCC_GetSystemClockFreq(); + + /* HCLK clock frequency */ + RCC_Clocks->HCLK_Frequency = RCC_GetHCLKClockFreq(RCC_Clocks->SYSCLK_Frequency); + + /* PCLK1 clock frequency */ + RCC_Clocks->PCLK1_Frequency = RCC_GetPCLK1ClockFreq(RCC_Clocks->HCLK_Frequency); + + /* PCLK2 clock frequency */ + RCC_Clocks->PCLK2_Frequency = RCC_GetPCLK2ClockFreq(RCC_Clocks->HCLK_Frequency); +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup RCC_LL_Private_Functions + * @{ + */ + +/** + * @brief Return SYSTEM clock frequency + * @retval SYSTEM clock frequency (in Hz) + */ +uint32_t RCC_GetSystemClockFreq(void) +{ + uint32_t frequency = 0U; + + /* Get SYSCLK source -------------------------------------------------------*/ + switch (LL_RCC_GetSysClkSource()) + { + case LL_RCC_SYS_CLKSOURCE_STATUS_MSI: /* MSI used as system clock source */ + frequency = __LL_RCC_CALC_MSI_FREQ(LL_RCC_MSI_GetRange()); + break; + + case LL_RCC_SYS_CLKSOURCE_STATUS_HSI: /* HSI used as system clock source */ + frequency = HSI_VALUE; + break; + + case LL_RCC_SYS_CLKSOURCE_STATUS_HSE: /* HSE used as system clock source */ + frequency = HSE_VALUE; + break; + + case LL_RCC_SYS_CLKSOURCE_STATUS_PLL: /* PLL used as system clock source */ + frequency = RCC_PLL_GetFreqDomain_SYS(); + break; + + default: + frequency = __LL_RCC_CALC_MSI_FREQ(LL_RCC_MSI_GetRange()); + break; + } + + return frequency; +} + +/** + * @brief Return HCLK clock frequency + * @param SYSCLK_Frequency SYSCLK clock frequency + * @retval HCLK clock frequency (in Hz) + */ +uint32_t RCC_GetHCLKClockFreq(uint32_t SYSCLK_Frequency) +{ + /* HCLK clock frequency */ + return __LL_RCC_CALC_HCLK_FREQ(SYSCLK_Frequency, LL_RCC_GetAHBPrescaler()); +} + +/** + * @brief Return PCLK1 clock frequency + * @param HCLK_Frequency HCLK clock frequency + * @retval PCLK1 clock frequency (in Hz) + */ +uint32_t RCC_GetPCLK1ClockFreq(uint32_t HCLK_Frequency) +{ + /* PCLK1 clock frequency */ + return __LL_RCC_CALC_PCLK1_FREQ(HCLK_Frequency, LL_RCC_GetAPB1Prescaler()); +} + +/** + * @brief Return PCLK2 clock frequency + * @param HCLK_Frequency HCLK clock frequency + * @retval PCLK2 clock frequency (in Hz) + */ +uint32_t RCC_GetPCLK2ClockFreq(uint32_t HCLK_Frequency) +{ + /* PCLK2 clock frequency */ + return __LL_RCC_CALC_PCLK2_FREQ(HCLK_Frequency, LL_RCC_GetAPB2Prescaler()); +} + +/** + * @brief Return PLL clock frequency used for system domain + * @retval PLL clock frequency (in Hz) + */ +uint32_t RCC_PLL_GetFreqDomain_SYS(void) +{ + uint32_t pllinputfreq = 0U, pllsource = 0U; + + /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLL divider) * PLL Multiplicator */ + + /* Get PLL source */ + pllsource = LL_RCC_PLL_GetMainSource(); + + switch (pllsource) + { + case LL_RCC_PLLSOURCE_HSI: /* HSI used as PLL clock source */ + pllinputfreq = HSI_VALUE; + break; + + case LL_RCC_PLLSOURCE_HSE: /* HSE used as PLL clock source */ + pllinputfreq = HSE_VALUE; + break; + + default: + pllinputfreq = HSI_VALUE; + break; + } + return __LL_RCC_CALC_PLLCLK_FREQ(pllinputfreq, LL_RCC_PLL_GetMultiplicator(), LL_RCC_PLL_GetDivider()); +} +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined(RCC) */ + +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_ll_rtc.c b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_ll_rtc.c new file mode 100755 index 0000000..1dabc60 --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_ll_rtc.c @@ -0,0 +1,908 @@ +/** + ****************************************************************************** + * @file stm32l1xx_ll_rtc.c + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief RTC LL module driver. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ +#if defined(USE_FULL_LL_DRIVER) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_ll_rtc.h" +#include "stm32l1xx_ll_cortex.h" +#ifdef USE_FULL_ASSERT +#include "stm32_assert.h" +#else +#define assert_param(expr) ((void)0U) +#endif + +/** @addtogroup STM32L1xx_LL_Driver + * @{ + */ + +#if defined(RTC) + +/** @addtogroup RTC_LL + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @addtogroup RTC_LL_Private_Constants + * @{ + */ +/* Default values used for prescaler */ +#define RTC_ASYNCH_PRESC_DEFAULT ((uint32_t) 0x0000007FU) +#define RTC_SYNCH_PRESC_DEFAULT ((uint32_t) 0x000000FFU) + +/* Values used for timeout */ +#define RTC_INITMODE_TIMEOUT ((uint32_t) 1000U) /* 1s when tick set to 1ms */ +#define RTC_SYNCHRO_TIMEOUT ((uint32_t) 1000U) /* 1s when tick set to 1ms */ +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @addtogroup RTC_LL_Private_Macros + * @{ + */ + +#define IS_LL_RTC_HOURFORMAT(__VALUE__) (((__VALUE__) == LL_RTC_HOURFORMAT_24HOUR) \ + || ((__VALUE__) == LL_RTC_HOURFORMAT_AMPM)) + +#define IS_LL_RTC_ASYNCH_PREDIV(__VALUE__) ((__VALUE__) <= (uint32_t)0x7FU) + +#define IS_LL_RTC_SYNCH_PREDIV(__VALUE__) ((__VALUE__) <= (uint32_t)0x7FFFU) + +#define IS_LL_RTC_FORMAT(__VALUE__) (((__VALUE__) == LL_RTC_FORMAT_BIN) \ + || ((__VALUE__) == LL_RTC_FORMAT_BCD)) + +#define IS_LL_RTC_TIME_FORMAT(__VALUE__) (((__VALUE__) == LL_RTC_TIME_FORMAT_AM_OR_24) \ + || ((__VALUE__) == LL_RTC_TIME_FORMAT_PM)) + +#define IS_LL_RTC_HOUR12(__HOUR__) (((__HOUR__) > 0U) && ((__HOUR__) <= 12U)) +#define IS_LL_RTC_HOUR24(__HOUR__) ((__HOUR__) <= 23U) +#define IS_LL_RTC_MINUTES(__MINUTES__) ((__MINUTES__) <= 59U) +#define IS_LL_RTC_SECONDS(__SECONDS__) ((__SECONDS__) <= 59U) + +#define IS_LL_RTC_WEEKDAY(__VALUE__) (((__VALUE__) == LL_RTC_WEEKDAY_MONDAY) \ + || ((__VALUE__) == LL_RTC_WEEKDAY_TUESDAY) \ + || ((__VALUE__) == LL_RTC_WEEKDAY_WEDNESDAY) \ + || ((__VALUE__) == LL_RTC_WEEKDAY_THURSDAY) \ + || ((__VALUE__) == LL_RTC_WEEKDAY_FRIDAY) \ + || ((__VALUE__) == LL_RTC_WEEKDAY_SATURDAY) \ + || ((__VALUE__) == LL_RTC_WEEKDAY_SUNDAY)) + +#define IS_LL_RTC_DAY(__DAY__) (((__DAY__) >= (uint32_t)1U) && ((__DAY__) <= (uint32_t)31U)) + +#define IS_LL_RTC_MONTH(__VALUE__) (((__VALUE__) == LL_RTC_MONTH_JANUARY) \ + || ((__VALUE__) == LL_RTC_MONTH_FEBRUARY) \ + || ((__VALUE__) == LL_RTC_MONTH_MARCH) \ + || ((__VALUE__) == LL_RTC_MONTH_APRIL) \ + || ((__VALUE__) == LL_RTC_MONTH_MAY) \ + || ((__VALUE__) == LL_RTC_MONTH_JUNE) \ + || ((__VALUE__) == LL_RTC_MONTH_JULY) \ + || ((__VALUE__) == LL_RTC_MONTH_AUGUST) \ + || ((__VALUE__) == LL_RTC_MONTH_SEPTEMBER) \ + || ((__VALUE__) == LL_RTC_MONTH_OCTOBER) \ + || ((__VALUE__) == LL_RTC_MONTH_NOVEMBER) \ + || ((__VALUE__) == LL_RTC_MONTH_DECEMBER)) + +#define IS_LL_RTC_YEAR(__YEAR__) ((__YEAR__) <= 99U) + +#define IS_LL_RTC_ALMA_MASK(__VALUE__) (((__VALUE__) == LL_RTC_ALMA_MASK_NONE) \ + || ((__VALUE__) == LL_RTC_ALMA_MASK_DATEWEEKDAY) \ + || ((__VALUE__) == LL_RTC_ALMA_MASK_HOURS) \ + || ((__VALUE__) == LL_RTC_ALMA_MASK_MINUTES) \ + || ((__VALUE__) == LL_RTC_ALMA_MASK_SECONDS) \ + || ((__VALUE__) == LL_RTC_ALMA_MASK_ALL)) + +#define IS_LL_RTC_ALMB_MASK(__VALUE__) (((__VALUE__) == LL_RTC_ALMB_MASK_NONE) \ + || ((__VALUE__) == LL_RTC_ALMB_MASK_DATEWEEKDAY) \ + || ((__VALUE__) == LL_RTC_ALMB_MASK_HOURS) \ + || ((__VALUE__) == LL_RTC_ALMB_MASK_MINUTES) \ + || ((__VALUE__) == LL_RTC_ALMB_MASK_SECONDS) \ + || ((__VALUE__) == LL_RTC_ALMB_MASK_ALL)) + + +#define IS_LL_RTC_ALMA_DATE_WEEKDAY_SEL(__SEL__) (((__SEL__) == LL_RTC_ALMA_DATEWEEKDAYSEL_DATE) || \ + ((__SEL__) == LL_RTC_ALMA_DATEWEEKDAYSEL_WEEKDAY)) + +#define IS_LL_RTC_ALMB_DATE_WEEKDAY_SEL(__SEL__) (((__SEL__) == LL_RTC_ALMB_DATEWEEKDAYSEL_DATE) || \ + ((__SEL__) == LL_RTC_ALMB_DATEWEEKDAYSEL_WEEKDAY)) + + +/** + * @} + */ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup RTC_LL_Exported_Functions + * @{ + */ + +/** @addtogroup RTC_LL_EF_Init + * @{ + */ + +/** + * @brief De-Initializes the RTC registers to their default reset values. + * @note This function doesn't reset the RTC Clock source and RTC Backup Data + * registers. + * @param RTCx RTC Instance + * @retval An ErrorStatus enumeration value: + * - SUCCESS: RTC registers are de-initialized + * - ERROR: RTC registers are not de-initialized + */ +ErrorStatus LL_RTC_DeInit(RTC_TypeDef *RTCx) +{ + ErrorStatus status = ERROR; + + /* Check the parameter */ + assert_param(IS_RTC_ALL_INSTANCE(RTCx)); + + /* Disable the write protection for RTC registers */ + LL_RTC_DisableWriteProtection(RTCx); + + /* Set Initialization mode */ + if (LL_RTC_EnterInitMode(RTCx) != ERROR) + { + /* Reset TR, DR and CR registers */ + LL_RTC_WriteReg(RTCx, TR, 0x00000000U); +#if defined(RTC_WAKEUP_SUPPORT) + LL_RTC_WriteReg(RTCx, WUTR, RTC_WUTR_WUT); +#endif /* RTC_WAKEUP_SUPPORT */ + LL_RTC_WriteReg(RTCx, DR , (RTC_DR_WDU_0 | RTC_DR_MU_0 | RTC_DR_DU_0)); + /* Reset All CR bits except CR[2:0] */ +#if defined(RTC_WAKEUP_SUPPORT) + LL_RTC_WriteReg(RTCx, CR, (LL_RTC_ReadReg(RTCx, CR) & RTC_CR_WUCKSEL)); +#else + LL_RTC_WriteReg(RTCx, CR, 0x00000000U); +#endif /* RTC_WAKEUP_SUPPORT */ + LL_RTC_WriteReg(RTCx, PRER, (RTC_PRER_PREDIV_A | RTC_SYNCH_PRESC_DEFAULT)); + LL_RTC_WriteReg(RTCx, ALRMAR, 0x00000000U); + LL_RTC_WriteReg(RTCx, ALRMBR, 0x00000000U); +#if defined(RTC_SHIFTR_ADD1S) + LL_RTC_WriteReg(RTCx, SHIFTR, 0x00000000U); +#endif /* RTC_SHIFTR_ADD1S */ +#if defined(RTC_SMOOTHCALIB_SUPPORT) + LL_RTC_WriteReg(RTCx, CALR, 0x00000000U); +#endif /* RTC_SMOOTHCALIB_SUPPORT */ +#if defined(RTC_SUBSECOND_SUPPORT) + LL_RTC_WriteReg(RTCx, ALRMASSR, 0x00000000U); + LL_RTC_WriteReg(RTCx, ALRMBSSR, 0x00000000U); +#endif /* RTC_SUBSECOND_SUPPORT */ + + /* Reset ISR register and exit initialization mode */ + LL_RTC_WriteReg(RTCx, ISR, 0x00000000U); + + /* Reset Tamper and alternate functions configuration register */ + LL_RTC_WriteReg(RTCx, TAFCR, 0x00000000U); + + /* Wait till the RTC RSF flag is set */ + status = LL_RTC_WaitForSynchro(RTCx); + } + + /* Enable the write protection for RTC registers */ + LL_RTC_EnableWriteProtection(RTCx); + + return status; +} + +/** + * @brief Initializes the RTC registers according to the specified parameters + * in RTC_InitStruct. + * @param RTCx RTC Instance + * @param RTC_InitStruct pointer to a @ref LL_RTC_InitTypeDef structure that contains + * the configuration information for the RTC peripheral. + * @note The RTC Prescaler register is write protected and can be written in + * initialization mode only. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: RTC registers are initialized + * - ERROR: RTC registers are not initialized + */ +ErrorStatus LL_RTC_Init(RTC_TypeDef *RTCx, LL_RTC_InitTypeDef *RTC_InitStruct) +{ + ErrorStatus status = ERROR; + + /* Check the parameters */ + assert_param(IS_RTC_ALL_INSTANCE(RTCx)); + assert_param(IS_LL_RTC_HOURFORMAT(RTC_InitStruct->HourFormat)); + assert_param(IS_LL_RTC_ASYNCH_PREDIV(RTC_InitStruct->AsynchPrescaler)); + assert_param(IS_LL_RTC_SYNCH_PREDIV(RTC_InitStruct->SynchPrescaler)); + + /* Disable the write protection for RTC registers */ + LL_RTC_DisableWriteProtection(RTCx); + + /* Set Initialization mode */ + if (LL_RTC_EnterInitMode(RTCx) != ERROR) + { + /* Set Hour Format */ + LL_RTC_SetHourFormat(RTCx, RTC_InitStruct->HourFormat); + + /* Configure Synchronous and Asynchronous prescaler factor */ + LL_RTC_SetSynchPrescaler(RTCx, RTC_InitStruct->SynchPrescaler); + LL_RTC_SetAsynchPrescaler(RTCx, RTC_InitStruct->AsynchPrescaler); + + /* Exit Initialization mode */ + LL_RTC_DisableInitMode(RTCx); + + status = SUCCESS; + } + /* Enable the write protection for RTC registers */ + LL_RTC_EnableWriteProtection(RTCx); + + return status; +} + +/** + * @brief Set each @ref LL_RTC_InitTypeDef field to default value. + * @param RTC_InitStruct pointer to a @ref LL_RTC_InitTypeDef structure which will be initialized. + * @retval None + */ +void LL_RTC_StructInit(LL_RTC_InitTypeDef *RTC_InitStruct) +{ + /* Set RTC_InitStruct fields to default values */ + RTC_InitStruct->HourFormat = LL_RTC_HOURFORMAT_24HOUR; + RTC_InitStruct->AsynchPrescaler = RTC_ASYNCH_PRESC_DEFAULT; + RTC_InitStruct->SynchPrescaler = RTC_SYNCH_PRESC_DEFAULT; +} + +/** + * @brief Set the RTC current time. + * @param RTCx RTC Instance + * @param RTC_Format This parameter can be one of the following values: + * @arg @ref LL_RTC_FORMAT_BIN + * @arg @ref LL_RTC_FORMAT_BCD + * @param RTC_TimeStruct pointer to a RTC_TimeTypeDef structure that contains + * the time configuration information for the RTC. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: RTC Time register is configured + * - ERROR: RTC Time register is not configured + */ +ErrorStatus LL_RTC_TIME_Init(RTC_TypeDef *RTCx, uint32_t RTC_Format, LL_RTC_TimeTypeDef *RTC_TimeStruct) +{ + ErrorStatus status = ERROR; + + /* Check the parameters */ + assert_param(IS_RTC_ALL_INSTANCE(RTCx)); + assert_param(IS_LL_RTC_FORMAT(RTC_Format)); + + if (RTC_Format == LL_RTC_FORMAT_BIN) + { + if (LL_RTC_GetHourFormat(RTCx) != LL_RTC_HOURFORMAT_24HOUR) + { + assert_param(IS_LL_RTC_HOUR12(RTC_TimeStruct->Hours)); + assert_param(IS_LL_RTC_TIME_FORMAT(RTC_TimeStruct->TimeFormat)); + } + else + { + RTC_TimeStruct->TimeFormat = 0x00U; + assert_param(IS_LL_RTC_HOUR24(RTC_TimeStruct->Hours)); + } + assert_param(IS_LL_RTC_MINUTES(RTC_TimeStruct->Minutes)); + assert_param(IS_LL_RTC_SECONDS(RTC_TimeStruct->Seconds)); + } + else + { + if (LL_RTC_GetHourFormat(RTCx) != LL_RTC_HOURFORMAT_24HOUR) + { + assert_param(IS_LL_RTC_HOUR12(__LL_RTC_CONVERT_BCD2BIN(RTC_TimeStruct->Hours))); + assert_param(IS_LL_RTC_TIME_FORMAT(RTC_TimeStruct->TimeFormat)); + } + else + { + RTC_TimeStruct->TimeFormat = 0x00U; + assert_param(IS_LL_RTC_HOUR24(__LL_RTC_CONVERT_BCD2BIN(RTC_TimeStruct->Hours))); + } + assert_param(IS_LL_RTC_MINUTES(__LL_RTC_CONVERT_BCD2BIN(RTC_TimeStruct->Minutes))); + assert_param(IS_LL_RTC_SECONDS(__LL_RTC_CONVERT_BCD2BIN(RTC_TimeStruct->Seconds))); + } + + /* Disable the write protection for RTC registers */ + LL_RTC_DisableWriteProtection(RTCx); + + /* Set Initialization mode */ + if (LL_RTC_EnterInitMode(RTCx) != ERROR) + { + /* Check the input parameters format */ + if (RTC_Format != LL_RTC_FORMAT_BIN) + { + LL_RTC_TIME_Config(RTCx, RTC_TimeStruct->TimeFormat, RTC_TimeStruct->Hours, + RTC_TimeStruct->Minutes, RTC_TimeStruct->Seconds); + } + else + { + LL_RTC_TIME_Config(RTCx, RTC_TimeStruct->TimeFormat, __LL_RTC_CONVERT_BIN2BCD(RTC_TimeStruct->Hours), + __LL_RTC_CONVERT_BIN2BCD(RTC_TimeStruct->Minutes), + __LL_RTC_CONVERT_BIN2BCD(RTC_TimeStruct->Seconds)); + } + + /* Exit Initialization mode */ + LL_RTC_DisableInitMode(RTC); + +#if defined(RTC_CR_BYPSHAD) + /* If RTC_CR_BYPSHAD bit = 0, wait for synchro else this check is not needed */ + if (LL_RTC_IsShadowRegBypassEnabled(RTCx) == 0U) + { + status = LL_RTC_WaitForSynchro(RTCx); + } + else + { + status = SUCCESS; + } +#else + status = SUCCESS; +#endif /* RTC_CR_BYPSHAD */ + } + /* Enable the write protection for RTC registers */ + LL_RTC_EnableWriteProtection(RTCx); + + return status; +} + +/** + * @brief Set each @ref LL_RTC_TimeTypeDef field to default value (Time = 00h:00min:00sec). + * @param RTC_TimeStruct pointer to a @ref LL_RTC_TimeTypeDef structure which will be initialized. + * @retval None + */ +void LL_RTC_TIME_StructInit(LL_RTC_TimeTypeDef *RTC_TimeStruct) +{ + /* Time = 00h:00min:00sec */ + RTC_TimeStruct->TimeFormat = LL_RTC_TIME_FORMAT_AM_OR_24; + RTC_TimeStruct->Hours = 0U; + RTC_TimeStruct->Minutes = 0U; + RTC_TimeStruct->Seconds = 0U; +} + +/** + * @brief Set the RTC current date. + * @param RTCx RTC Instance + * @param RTC_Format This parameter can be one of the following values: + * @arg @ref LL_RTC_FORMAT_BIN + * @arg @ref LL_RTC_FORMAT_BCD + * @param RTC_DateStruct: pointer to a RTC_DateTypeDef structure that contains + * the date configuration information for the RTC. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: RTC Day register is configured + * - ERROR: RTC Day register is not configured + */ +ErrorStatus LL_RTC_DATE_Init(RTC_TypeDef *RTCx, uint32_t RTC_Format, LL_RTC_DateTypeDef *RTC_DateStruct) +{ + ErrorStatus status = ERROR; + + /* Check the parameters */ + assert_param(IS_RTC_ALL_INSTANCE(RTCx)); + assert_param(IS_LL_RTC_FORMAT(RTC_Format)); + + if ((RTC_Format == LL_RTC_FORMAT_BIN) && ((RTC_DateStruct->Month & 0x10U) == 0x10U)) + { + RTC_DateStruct->Month = (RTC_DateStruct->Month & (uint32_t)~(0x10U)) + 0x0AU; + } + if (RTC_Format == LL_RTC_FORMAT_BIN) + { + assert_param(IS_LL_RTC_YEAR(RTC_DateStruct->Year)); + assert_param(IS_LL_RTC_MONTH(RTC_DateStruct->Month)); + assert_param(IS_LL_RTC_DAY(RTC_DateStruct->Day)); + } + else + { + assert_param(IS_LL_RTC_YEAR(__LL_RTC_CONVERT_BCD2BIN(RTC_DateStruct->Year))); + assert_param(IS_LL_RTC_MONTH(__LL_RTC_CONVERT_BCD2BIN(RTC_DateStruct->Month))); + assert_param(IS_LL_RTC_DAY(__LL_RTC_CONVERT_BCD2BIN(RTC_DateStruct->Day))); + } + assert_param(IS_LL_RTC_WEEKDAY(RTC_DateStruct->WeekDay)); + + /* Disable the write protection for RTC registers */ + LL_RTC_DisableWriteProtection(RTCx); + + /* Set Initialization mode */ + if (LL_RTC_EnterInitMode(RTCx) != ERROR) + { + /* Check the input parameters format */ + if (RTC_Format != LL_RTC_FORMAT_BIN) + { + LL_RTC_DATE_Config(RTCx, RTC_DateStruct->WeekDay, RTC_DateStruct->Day, RTC_DateStruct->Month, RTC_DateStruct->Year); + } + else + { + LL_RTC_DATE_Config(RTCx, RTC_DateStruct->WeekDay, __LL_RTC_CONVERT_BIN2BCD(RTC_DateStruct->Day), + __LL_RTC_CONVERT_BIN2BCD(RTC_DateStruct->Month), __LL_RTC_CONVERT_BIN2BCD(RTC_DateStruct->Year)); + } + + /* Exit Initialization mode */ + LL_RTC_DisableInitMode(RTC); + +#if defined(RTC_CR_BYPSHAD) + /* If RTC_CR_BYPSHAD bit = 0, wait for synchro else this check is not needed */ + if (LL_RTC_IsShadowRegBypassEnabled(RTCx) == 0U) + { + status = LL_RTC_WaitForSynchro(RTCx); + } + else + { + status = SUCCESS; + } +#else + status = SUCCESS; +#endif /* RTC_CR_BYPSHAD */ + } + /* Enable the write protection for RTC registers */ + LL_RTC_EnableWriteProtection(RTCx); + + return status; +} + +/** + * @brief Set each @ref LL_RTC_DateTypeDef field to default value (date = Monday, January 01 xx00) + * @param RTC_DateStruct pointer to a @ref LL_RTC_DateTypeDef structure which will be initialized. + * @retval None + */ +void LL_RTC_DATE_StructInit(LL_RTC_DateTypeDef *RTC_DateStruct) +{ + /* Monday, January 01 xx00 */ + RTC_DateStruct->WeekDay = LL_RTC_WEEKDAY_MONDAY; + RTC_DateStruct->Day = 1U; + RTC_DateStruct->Month = LL_RTC_MONTH_JANUARY; + RTC_DateStruct->Year = 0U; +} + +/** + * @brief Set the RTC Alarm A. + * @note The Alarm register can only be written when the corresponding Alarm + * is disabled (Use @ref LL_RTC_ALMA_Disable function). + * @param RTCx RTC Instance + * @param RTC_Format This parameter can be one of the following values: + * @arg @ref LL_RTC_FORMAT_BIN + * @arg @ref LL_RTC_FORMAT_BCD + * @param RTC_AlarmStruct pointer to a @ref LL_RTC_AlarmTypeDef structure that + * contains the alarm configuration parameters. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: ALARMA registers are configured + * - ERROR: ALARMA registers are not configured + */ +ErrorStatus LL_RTC_ALMA_Init(RTC_TypeDef *RTCx, uint32_t RTC_Format, LL_RTC_AlarmTypeDef *RTC_AlarmStruct) +{ + /* Check the parameters */ + assert_param(IS_RTC_ALL_INSTANCE(RTCx)); + assert_param(IS_LL_RTC_FORMAT(RTC_Format)); + assert_param(IS_LL_RTC_ALMA_MASK(RTC_AlarmStruct->AlarmMask)); + assert_param(IS_LL_RTC_ALMA_DATE_WEEKDAY_SEL(RTC_AlarmStruct->AlarmDateWeekDaySel)); + + if (RTC_Format == LL_RTC_FORMAT_BIN) + { + if (LL_RTC_GetHourFormat(RTCx) != LL_RTC_HOURFORMAT_24HOUR) + { + assert_param(IS_LL_RTC_HOUR12(RTC_AlarmStruct->AlarmTime.Hours)); + assert_param(IS_LL_RTC_TIME_FORMAT(RTC_AlarmStruct->AlarmTime.TimeFormat)); + } + else + { + RTC_AlarmStruct->AlarmTime.TimeFormat = 0x00U; + assert_param(IS_LL_RTC_HOUR24(RTC_AlarmStruct->AlarmTime.Hours)); + } + assert_param(IS_LL_RTC_MINUTES(RTC_AlarmStruct->AlarmTime.Minutes)); + assert_param(IS_LL_RTC_SECONDS(RTC_AlarmStruct->AlarmTime.Seconds)); + + if (RTC_AlarmStruct->AlarmDateWeekDaySel == LL_RTC_ALMA_DATEWEEKDAYSEL_DATE) + { + assert_param(IS_LL_RTC_DAY(RTC_AlarmStruct->AlarmDateWeekDay)); + } + else + { + assert_param(IS_LL_RTC_WEEKDAY(RTC_AlarmStruct->AlarmDateWeekDay)); + } + } + else + { + if (LL_RTC_GetHourFormat(RTCx) != LL_RTC_HOURFORMAT_24HOUR) + { + assert_param(IS_LL_RTC_HOUR12(__LL_RTC_CONVERT_BCD2BIN(RTC_AlarmStruct->AlarmTime.Hours))); + assert_param(IS_LL_RTC_TIME_FORMAT(RTC_AlarmStruct->AlarmTime.TimeFormat)); + } + else + { + RTC_AlarmStruct->AlarmTime.TimeFormat = 0x00U; + assert_param(IS_LL_RTC_HOUR24(__LL_RTC_CONVERT_BCD2BIN(RTC_AlarmStruct->AlarmTime.Hours))); + } + + assert_param(IS_LL_RTC_MINUTES(__LL_RTC_CONVERT_BCD2BIN(RTC_AlarmStruct->AlarmTime.Minutes))); + assert_param(IS_LL_RTC_SECONDS(__LL_RTC_CONVERT_BCD2BIN(RTC_AlarmStruct->AlarmTime.Seconds))); + + if (RTC_AlarmStruct->AlarmDateWeekDaySel == LL_RTC_ALMA_DATEWEEKDAYSEL_DATE) + { + assert_param(IS_LL_RTC_DAY(__LL_RTC_CONVERT_BCD2BIN(RTC_AlarmStruct->AlarmDateWeekDay))); + } + else + { + assert_param(IS_LL_RTC_WEEKDAY(__LL_RTC_CONVERT_BCD2BIN(RTC_AlarmStruct->AlarmDateWeekDay))); + } + } + + /* Disable the write protection for RTC registers */ + LL_RTC_DisableWriteProtection(RTCx); + + /* Select weekday selection */ + if (RTC_AlarmStruct->AlarmDateWeekDaySel == LL_RTC_ALMA_DATEWEEKDAYSEL_DATE) + { + /* Set the date for ALARM */ + LL_RTC_ALMA_DisableWeekday(RTCx); + if (RTC_Format != LL_RTC_FORMAT_BIN) + { + LL_RTC_ALMA_SetDay(RTCx, RTC_AlarmStruct->AlarmDateWeekDay); + } + else + { + LL_RTC_ALMA_SetDay(RTCx, __LL_RTC_CONVERT_BIN2BCD(RTC_AlarmStruct->AlarmDateWeekDay)); + } + } + else + { + /* Set the week day for ALARM */ + LL_RTC_ALMA_EnableWeekday(RTCx); + LL_RTC_ALMA_SetWeekDay(RTCx, RTC_AlarmStruct->AlarmDateWeekDay); + } + + /* Configure the Alarm register */ + if (RTC_Format != LL_RTC_FORMAT_BIN) + { + LL_RTC_ALMA_ConfigTime(RTCx, RTC_AlarmStruct->AlarmTime.TimeFormat, RTC_AlarmStruct->AlarmTime.Hours, + RTC_AlarmStruct->AlarmTime.Minutes, RTC_AlarmStruct->AlarmTime.Seconds); + } + else + { + LL_RTC_ALMA_ConfigTime(RTCx, RTC_AlarmStruct->AlarmTime.TimeFormat, + __LL_RTC_CONVERT_BIN2BCD(RTC_AlarmStruct->AlarmTime.Hours), + __LL_RTC_CONVERT_BIN2BCD(RTC_AlarmStruct->AlarmTime.Minutes), + __LL_RTC_CONVERT_BIN2BCD(RTC_AlarmStruct->AlarmTime.Seconds)); + } + /* Set ALARM mask */ + LL_RTC_ALMA_SetMask(RTCx, RTC_AlarmStruct->AlarmMask); + + /* Enable the write protection for RTC registers */ + LL_RTC_EnableWriteProtection(RTCx); + + return SUCCESS; +} + +/** + * @brief Set the RTC Alarm B. + * @note The Alarm register can only be written when the corresponding Alarm + * is disabled (@ref LL_RTC_ALMB_Disable function). + * @param RTCx RTC Instance + * @param RTC_Format This parameter can be one of the following values: + * @arg @ref LL_RTC_FORMAT_BIN + * @arg @ref LL_RTC_FORMAT_BCD + * @param RTC_AlarmStruct pointer to a @ref LL_RTC_AlarmTypeDef structure that + * contains the alarm configuration parameters. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: ALARMB registers are configured + * - ERROR: ALARMB registers are not configured + */ +ErrorStatus LL_RTC_ALMB_Init(RTC_TypeDef *RTCx, uint32_t RTC_Format, LL_RTC_AlarmTypeDef *RTC_AlarmStruct) +{ + /* Check the parameters */ + assert_param(IS_RTC_ALL_INSTANCE(RTCx)); + assert_param(IS_LL_RTC_FORMAT(RTC_Format)); + assert_param(IS_LL_RTC_ALMB_MASK(RTC_AlarmStruct->AlarmMask)); + assert_param(IS_LL_RTC_ALMB_DATE_WEEKDAY_SEL(RTC_AlarmStruct->AlarmDateWeekDaySel)); + + if (RTC_Format == LL_RTC_FORMAT_BIN) + { + if (LL_RTC_GetHourFormat(RTCx) != LL_RTC_HOURFORMAT_24HOUR) + { + assert_param(IS_LL_RTC_HOUR12(RTC_AlarmStruct->AlarmTime.Hours)); + assert_param(IS_LL_RTC_TIME_FORMAT(RTC_AlarmStruct->AlarmTime.TimeFormat)); + } + else + { + RTC_AlarmStruct->AlarmTime.TimeFormat = 0x00U; + assert_param(IS_LL_RTC_HOUR24(RTC_AlarmStruct->AlarmTime.Hours)); + } + assert_param(IS_LL_RTC_MINUTES(RTC_AlarmStruct->AlarmTime.Minutes)); + assert_param(IS_LL_RTC_SECONDS(RTC_AlarmStruct->AlarmTime.Seconds)); + + if (RTC_AlarmStruct->AlarmDateWeekDaySel == LL_RTC_ALMB_DATEWEEKDAYSEL_DATE) + { + assert_param(IS_LL_RTC_DAY(RTC_AlarmStruct->AlarmDateWeekDay)); + } + else + { + assert_param(IS_LL_RTC_WEEKDAY(RTC_AlarmStruct->AlarmDateWeekDay)); + } + } + else + { + if (LL_RTC_GetHourFormat(RTCx) != LL_RTC_HOURFORMAT_24HOUR) + { + assert_param(IS_LL_RTC_HOUR12(__LL_RTC_CONVERT_BCD2BIN(RTC_AlarmStruct->AlarmTime.Hours))); + assert_param(IS_LL_RTC_TIME_FORMAT(RTC_AlarmStruct->AlarmTime.TimeFormat)); + } + else + { + RTC_AlarmStruct->AlarmTime.TimeFormat = 0x00U; + assert_param(IS_LL_RTC_HOUR24(__LL_RTC_CONVERT_BCD2BIN(RTC_AlarmStruct->AlarmTime.Hours))); + } + + assert_param(IS_LL_RTC_MINUTES(__LL_RTC_CONVERT_BCD2BIN(RTC_AlarmStruct->AlarmTime.Minutes))); + assert_param(IS_LL_RTC_SECONDS(__LL_RTC_CONVERT_BCD2BIN(RTC_AlarmStruct->AlarmTime.Seconds))); + + if (RTC_AlarmStruct->AlarmDateWeekDaySel == LL_RTC_ALMB_DATEWEEKDAYSEL_DATE) + { + assert_param(IS_LL_RTC_DAY(__LL_RTC_CONVERT_BCD2BIN(RTC_AlarmStruct->AlarmDateWeekDay))); + } + else + { + assert_param(IS_LL_RTC_WEEKDAY(__LL_RTC_CONVERT_BCD2BIN(RTC_AlarmStruct->AlarmDateWeekDay))); + } + } + + /* Disable the write protection for RTC registers */ + LL_RTC_DisableWriteProtection(RTCx); + + /* Select weekday selection */ + if (RTC_AlarmStruct->AlarmDateWeekDaySel == LL_RTC_ALMB_DATEWEEKDAYSEL_DATE) + { + /* Set the date for ALARM */ + LL_RTC_ALMB_DisableWeekday(RTCx); + if (RTC_Format != LL_RTC_FORMAT_BIN) + { + LL_RTC_ALMB_SetDay(RTCx, RTC_AlarmStruct->AlarmDateWeekDay); + } + else + { + LL_RTC_ALMB_SetDay(RTCx, __LL_RTC_CONVERT_BIN2BCD(RTC_AlarmStruct->AlarmDateWeekDay)); + } + } + else + { + /* Set the week day for ALARM */ + LL_RTC_ALMB_EnableWeekday(RTCx); + LL_RTC_ALMB_SetWeekDay(RTCx, RTC_AlarmStruct->AlarmDateWeekDay); + } + + /* Configure the Alarm register */ + if (RTC_Format != LL_RTC_FORMAT_BIN) + { + LL_RTC_ALMB_ConfigTime(RTCx, RTC_AlarmStruct->AlarmTime.TimeFormat, RTC_AlarmStruct->AlarmTime.Hours, + RTC_AlarmStruct->AlarmTime.Minutes, RTC_AlarmStruct->AlarmTime.Seconds); + } + else + { + LL_RTC_ALMB_ConfigTime(RTCx, RTC_AlarmStruct->AlarmTime.TimeFormat, + __LL_RTC_CONVERT_BIN2BCD(RTC_AlarmStruct->AlarmTime.Hours), + __LL_RTC_CONVERT_BIN2BCD(RTC_AlarmStruct->AlarmTime.Minutes), + __LL_RTC_CONVERT_BIN2BCD(RTC_AlarmStruct->AlarmTime.Seconds)); + } + /* Set ALARM mask */ + LL_RTC_ALMB_SetMask(RTCx, RTC_AlarmStruct->AlarmMask); + + /* Enable the write protection for RTC registers */ + LL_RTC_EnableWriteProtection(RTCx); + + return SUCCESS; +} + +/** + * @brief Set each @ref LL_RTC_AlarmTypeDef of ALARMA field to default value (Time = 00h:00mn:00sec / + * Day = 1st day of the month/Mask = all fields are masked). + * @param RTC_AlarmStruct pointer to a @ref LL_RTC_AlarmTypeDef structure which will be initialized. + * @retval None + */ +void LL_RTC_ALMA_StructInit(LL_RTC_AlarmTypeDef *RTC_AlarmStruct) +{ + /* Alarm Time Settings : Time = 00h:00mn:00sec */ + RTC_AlarmStruct->AlarmTime.TimeFormat = LL_RTC_ALMA_TIME_FORMAT_AM; + RTC_AlarmStruct->AlarmTime.Hours = 0U; + RTC_AlarmStruct->AlarmTime.Minutes = 0U; + RTC_AlarmStruct->AlarmTime.Seconds = 0U; + + /* Alarm Day Settings : Day = 1st day of the month */ + RTC_AlarmStruct->AlarmDateWeekDaySel = LL_RTC_ALMA_DATEWEEKDAYSEL_DATE; + RTC_AlarmStruct->AlarmDateWeekDay = 1U; + + /* Alarm Masks Settings : Mask = all fields are not masked */ + RTC_AlarmStruct->AlarmMask = LL_RTC_ALMA_MASK_NONE; +} + +/** + * @brief Set each @ref LL_RTC_AlarmTypeDef of ALARMA field to default value (Time = 00h:00mn:00sec / + * Day = 1st day of the month/Mask = all fields are masked). + * @param RTC_AlarmStruct pointer to a @ref LL_RTC_AlarmTypeDef structure which will be initialized. + * @retval None + */ +void LL_RTC_ALMB_StructInit(LL_RTC_AlarmTypeDef *RTC_AlarmStruct) +{ + /* Alarm Time Settings : Time = 00h:00mn:00sec */ + RTC_AlarmStruct->AlarmTime.TimeFormat = LL_RTC_ALMB_TIME_FORMAT_AM; + RTC_AlarmStruct->AlarmTime.Hours = 0U; + RTC_AlarmStruct->AlarmTime.Minutes = 0U; + RTC_AlarmStruct->AlarmTime.Seconds = 0U; + + /* Alarm Day Settings : Day = 1st day of the month */ + RTC_AlarmStruct->AlarmDateWeekDaySel = LL_RTC_ALMB_DATEWEEKDAYSEL_DATE; + RTC_AlarmStruct->AlarmDateWeekDay = 1U; + + /* Alarm Masks Settings : Mask = all fields are not masked */ + RTC_AlarmStruct->AlarmMask = LL_RTC_ALMB_MASK_NONE; +} + +/** + * @brief Enters the RTC Initialization mode. + * @note The RTC Initialization mode is write protected, use the + * @ref LL_RTC_DisableWriteProtection before calling this function. + * @param RTCx RTC Instance + * @retval An ErrorStatus enumeration value: + * - SUCCESS: RTC is in Init mode + * - ERROR: RTC is not in Init mode + */ +ErrorStatus LL_RTC_EnterInitMode(RTC_TypeDef *RTCx) +{ + __IO uint32_t timeout = RTC_INITMODE_TIMEOUT; + ErrorStatus status = SUCCESS; + uint32_t tmp = 0U; + + /* Check the parameter */ + assert_param(IS_RTC_ALL_INSTANCE(RTCx)); + + /* Check if the Initialization mode is set */ + if (LL_RTC_IsActiveFlag_INIT(RTCx) == 0U) + { + /* Set the Initialization mode */ + LL_RTC_EnableInitMode(RTCx); + + /* Wait till RTC is in INIT state and if Time out is reached exit */ + tmp = LL_RTC_IsActiveFlag_INIT(RTCx); + while ((timeout != 0U) && (tmp != 1U)) + { + if (LL_SYSTICK_IsActiveCounterFlag() == 1U) + { + timeout --; + } + tmp = LL_RTC_IsActiveFlag_INIT(RTCx); + if (timeout == 0U) + { + status = ERROR; + } + } + } + return status; +} + +/** + * @brief Exit the RTC Initialization mode. + * @note When the initialization sequence is complete, the calendar restarts + * counting after 4 RTCCLK cycles. + * @note The RTC Initialization mode is write protected, use the + * @ref LL_RTC_DisableWriteProtection before calling this function. + * @param RTCx RTC Instance + * @retval An ErrorStatus enumeration value: + * - SUCCESS: RTC exited from in Init mode + * - ERROR: Not applicable + */ +ErrorStatus LL_RTC_ExitInitMode(RTC_TypeDef *RTCx) +{ + /* Check the parameter */ + assert_param(IS_RTC_ALL_INSTANCE(RTCx)); + + /* Disable initialization mode */ + LL_RTC_DisableInitMode(RTCx); + + return SUCCESS; +} + +/** + * @brief Waits until the RTC Time and Day registers (RTC_TR and RTC_DR) are + * synchronized with RTC APB clock. + * @note The RTC Resynchronization mode is write protected, use the + * @ref LL_RTC_DisableWriteProtection before calling this function. + * @note To read the calendar through the shadow registers after Calendar + * initialization, calendar update or after wakeup from low power modes + * the software must first clear the RSF flag. + * The software must then wait until it is set again before reading + * the calendar, which means that the calendar registers have been + * correctly copied into the RTC_TR and RTC_DR shadow registers. + * @param RTCx RTC Instance + * @retval An ErrorStatus enumeration value: + * - SUCCESS: RTC registers are synchronised + * - ERROR: RTC registers are not synchronised + */ +ErrorStatus LL_RTC_WaitForSynchro(RTC_TypeDef *RTCx) +{ + __IO uint32_t timeout = RTC_SYNCHRO_TIMEOUT; + ErrorStatus status = SUCCESS; + uint32_t tmp = 0U; + + /* Check the parameter */ + assert_param(IS_RTC_ALL_INSTANCE(RTCx)); + + /* Clear RSF flag */ + LL_RTC_ClearFlag_RS(RTCx); + + /* Wait the registers to be synchronised */ + tmp = LL_RTC_IsActiveFlag_RS(RTCx); + while ((timeout != 0U) && (tmp != 0U)) + { + if (LL_SYSTICK_IsActiveCounterFlag() == 1U) + { + timeout--; + } + tmp = LL_RTC_IsActiveFlag_RS(RTCx); + if (timeout == 0U) + { + status = ERROR; + } + } + + if (status != ERROR) + { + timeout = RTC_SYNCHRO_TIMEOUT; + tmp = LL_RTC_IsActiveFlag_RS(RTCx); + while ((timeout != 0U) && (tmp != 1U)) + { + if (LL_SYSTICK_IsActiveCounterFlag() == 1U) + { + timeout--; + } + tmp = LL_RTC_IsActiveFlag_RS(RTCx); + if (timeout == 0U) + { + status = ERROR; + } + } + } + + return (status); +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined(RTC) */ + +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_ll_sdmmc.c b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_ll_sdmmc.c new file mode 100755 index 0000000..8a0ad4d --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_ll_sdmmc.c @@ -0,0 +1,508 @@ +/** + ****************************************************************************** + * @file stm32l1xx_ll_sdmmc.c + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief SDMMC Low Layer HAL module driver. + * + * This file provides firmware functions to manage the following + * functionalities of the SDMMC peripheral: + * + Initialization/de-initialization functions + * + I/O operation functions + * + Peripheral Control functions + * + Peripheral State functions + * + @verbatim + ============================================================================== + ##### SDMMC peripheral features ##### + ============================================================================== + [..] The SD/SDIO MMC card host interface (SDIO) provides an interface between the APB2 + peripheral bus and MultiMedia cards (MMCs), SD memory cards, SDIO cards and CE-ATA + devices. + + [..] The SDIO features include the following: + (+) Full compliance with MultiMedia Card System Specification Version 4.2. Card support + for three different databus modes: 1-bit (default), 4-bit and 8-bit + (+) Full compatibility with previous versions of MultiMedia Cards (forward compatibility) + (+) Full compliance with SD Memory Card Specifications Version 2.0 + (+) Full compliance with SD I/O Card Specification Version 2.0: card support for two + different data bus modes: 1-bit (default) and 4-bit + (+) Full support of the CE-ATA features (full compliance with CE-ATA digital protocol + Rev1.1) + (+) Data transfer up to 48 MHz for the 8 bit mode + (+) Data and command output enable signals to control external bidirectional drivers. + + + ##### How to use this driver ##### + ============================================================================== + [..] + This driver is a considered as a driver of service for external devices drivers + that interfaces with the SDIO peripheral. + According to the device used (SD card/ MMC card / SDIO card ...), a set of APIs + is used in the device's driver to perform SDIO operations and functionalities. + + This driver is almost transparent for the final user, it is only used to implement other + functionalities of the external device. + + [..] + (+) The SDIO clock (SDIOCLK = 48 MHz) is coming from the PLL. Before start working with SDIO peripheral make sure that the + PLL is well configured. + The SDIO peripheral uses two clock signals: + (++) SDIO adapter clock (SDIOCLK = 48 MHz) + (++) APB2 bus clock (PCLK2) + + -@@- PCLK2 and SDIO_CK clock frequencies must respect the following condition: + Frequency(PCLK2) >= (3 / 8 x Frequency(SDIO_CK)) + + (+) Enable/Disable peripheral clock using RCC peripheral macros related to SDIO + peripheral. + + (+) Enable the Power ON State using the SDIO_PowerState_ON(SDIOx) + function and disable it using the function SDIO_PowerState_OFF(SDIOx). + + (+) Enable/Disable the clock using the __SDIO_ENABLE()/__SDIO_DISABLE() macros. + + (+) Enable/Disable the peripheral interrupts using the macros __SDIO_ENABLE_IT(hsdio, IT) + and __SDIO_DISABLE_IT(hsdio, IT) if you need to use interrupt mode. + + (+) When using the DMA mode + (++) Configure the DMA in the MSP layer of the external device + (++) Active the needed channel Request + (++) Enable the DMA using __SDIO_DMA_ENABLE() macro or Disable it using the macro + __SDIO_DMA_DISABLE(). + + (+) To control the CPSM (Command Path State Machine) and send + commands to the card use the SDIO_SendCommand(SDIOx), + SDIO_GetCommandResponse() and SDIO_GetResponse() functions. First, user has + to fill the command structure (pointer to SDIO_CmdInitTypeDef) according + to the selected command to be sent. + The parameters that should be filled are: + (++) Command Argument + (++) Command Index + (++) Command Response type + (++) Command Wait + (++) CPSM Status (Enable or Disable). + + -@@- To check if the command is well received, read the SDIO_CMDRESP + register using the SDIO_GetCommandResponse(). + The SDIO responses registers (SDIO_RESP1 to SDIO_RESP2), use the + SDIO_GetResponse() function. + + (+) To control the DPSM (Data Path State Machine) and send/receive + data to/from the card use the SDIO_DataConfig(), SDIO_GetDataCounter(), + SDIO_ReadFIFO(), SDIO_WriteFIFO() and SDIO_GetFIFOCount() functions. + + *** Read Operations *** + ======================= + [..] + (#) First, user has to fill the data structure (pointer to + SDIO_DataInitTypeDef) according to the selected data type to be received. + The parameters that should be filled are: + (++) Data Timeout + (++) Data Length + (++) Data Block size + (++) Data Transfer direction: should be from card (To SDIO) + (++) Data Transfer mode + (++) DPSM Status (Enable or Disable) + + (#) Configure the SDIO resources to receive the data from the card + according to selected transfer mode. + + (#) Send the selected Read command. + + (#) Use the SDIO flags/interrupts to check the transfer status. + + *** Write Operations *** + ======================== + [..] + (#) First, user has to fill the data structure (pointer to + SDIO_DataInitTypeDef) according to the selected data type to be received. + The parameters that should be filled are: + (++) Data Timeout + (++) Data Length + (++) Data Block size + (++) Data Transfer direction: should be to card (To CARD) + (++) Data Transfer mode + (++) DPSM Status (Enable or Disable) + + (#) Configure the SDIO resources to send the data to the card according to + selected transfer mode. + + (#) Send the selected Write command. + + (#) Use the SDIO flags/interrupts to check the transfer status. + + @endverbatim + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_hal.h" + +/** @addtogroup STM32L1xx_HAL_Driver + * @{ + */ + +/** @defgroup SDMMC_LL SDMMC_LL + * @brief Low layer module for SD and MMC driver + * @{ + */ + +#if defined (HAL_SD_MODULE_ENABLED) || defined(HAL_MMC_MODULE_ENABLED) + +#if defined(STM32L151xD) || defined(STM32L152xD) || defined(STM32L162xD) + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup SDMMC_LL_Exported_Functions SDMMC_LL Exported Functions + * @{ + */ + +/** @defgroup HAL_SDMMC_LL_Group1 Initialization/de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization/de-initialization functions ##### + =============================================================================== + [..] This section provides functions allowing to: + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the SDIO according to the specified + * parameters in the SDIO_InitTypeDef and create the associated handle. + * @param SDIOx: Pointer to SDIO register base + * @param Init: SDIO initialization structure + * @retval HAL status + */ +HAL_StatusTypeDef SDIO_Init(SDIO_TypeDef *SDIOx, SDIO_InitTypeDef Init) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_SDIO_ALL_INSTANCE(SDIOx)); + assert_param(IS_SDIO_CLOCK_EDGE(Init.ClockEdge)); + assert_param(IS_SDIO_CLOCK_BYPASS(Init.ClockBypass)); + assert_param(IS_SDIO_CLOCK_POWER_SAVE(Init.ClockPowerSave)); + assert_param(IS_SDIO_BUS_WIDE(Init.BusWide)); + assert_param(IS_SDIO_HARDWARE_FLOW_CONTROL(Init.HardwareFlowControl)); + assert_param(IS_SDIO_CLKDIV(Init.ClockDiv)); + + /* Set SDIO configuration parameters */ + tmpreg |= (Init.ClockEdge |\ + Init.ClockBypass |\ + Init.ClockPowerSave |\ + Init.BusWide |\ + Init.HardwareFlowControl |\ + Init.ClockDiv + ); + + /* Write to SDIO CLKCR */ + MODIFY_REG(SDIOx->CLKCR, CLKCR_CLEAR_MASK, tmpreg); + + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup HAL_SDMMC_LL_Group2 I/O operation functions + * @brief Data transfers functions + * +@verbatim + =============================================================================== + ##### I/O operation functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to manage the SDIO data + transfers. + +@endverbatim + * @{ + */ + +/** + * @brief Read data (word) from Rx FIFO in blocking mode (polling) + * @param SDIOx: Pointer to SDIO register base + * @retval HAL status + */ +uint32_t SDIO_ReadFIFO(SDIO_TypeDef *SDIOx) +{ + /* Read data from Rx FIFO */ + return (SDIOx->FIFO); +} + +/** + * @brief Write data (word) to Tx FIFO in blocking mode (polling) + * @param SDIOx: Pointer to SDIO register base + * @param pWriteData: pointer to data to write + * @retval HAL status + */ +HAL_StatusTypeDef SDIO_WriteFIFO(SDIO_TypeDef *SDIOx, uint32_t *pWriteData) +{ + /* Write data to FIFO */ + SDIOx->FIFO = *pWriteData; + + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup HAL_SDMMC_LL_Group3 Peripheral Control functions + * @brief management functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the SDIO data + transfers. + +@endverbatim + * @{ + */ + +/** + * @brief Set SDIO Power state to ON. + * @param SDIOx: Pointer to SDIO register base + * @retval HAL status + */ +HAL_StatusTypeDef SDIO_PowerState_ON(SDIO_TypeDef *SDIOx) +{ + /* Set power state to ON */ + SDIOx->POWER = SDIO_POWER_PWRCTRL; + + return HAL_OK; +} + +/** + * @brief Set SDIO Power state to OFF. + * @param SDIOx: Pointer to SDIO register base + * @retval HAL status + */ +HAL_StatusTypeDef SDIO_PowerState_OFF(SDIO_TypeDef *SDIOx) +{ + /* Set power state to OFF */ + SDIOx->POWER = (uint32_t)0x00000000; + + return HAL_OK; +} + +/** + * @brief Get SDIO Power state. + * @param SDIOx: Pointer to SDIO register base + * @retval Power status of the controller. The returned value can be one of the + * following values: + * - 0x00: Power OFF + * - 0x02: Power UP + * - 0x03: Power ON + */ +uint32_t SDIO_GetPowerState(SDIO_TypeDef *SDIOx) +{ + return (SDIOx->POWER & SDIO_POWER_PWRCTRL); +} + +/** + * @brief Configure the SDIO command path according to the specified parameters in + * SDIO_CmdInitTypeDef structure and send the command + * @param SDIOx: Pointer to SDIO register base + * @param SDIO_CmdInitStruct: pointer to a SDIO_CmdInitTypeDef structure that contains + * the configuration information for the SDIO command + * @retval HAL status + */ +HAL_StatusTypeDef SDIO_SendCommand(SDIO_TypeDef *SDIOx, SDIO_CmdInitTypeDef *SDIO_CmdInitStruct) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_SDIO_CMD_INDEX(SDIO_CmdInitStruct->CmdIndex)); + assert_param(IS_SDIO_RESPONSE(SDIO_CmdInitStruct->Response)); + assert_param(IS_SDIO_WAIT(SDIO_CmdInitStruct->WaitForInterrupt)); + assert_param(IS_SDIO_CPSM(SDIO_CmdInitStruct->CPSM)); + + /* Set the SDIO Argument value */ + SDIOx->ARG = SDIO_CmdInitStruct->Argument; + + /* Set SDIO command parameters */ + tmpreg |= (uint32_t)(SDIO_CmdInitStruct->CmdIndex |\ + SDIO_CmdInitStruct->Response |\ + SDIO_CmdInitStruct->WaitForInterrupt |\ + SDIO_CmdInitStruct->CPSM); + + /* Write to SDIO CMD register */ + MODIFY_REG(SDIOx->CMD, CMD_CLEAR_MASK, tmpreg); + + return HAL_OK; +} + +/** + * @brief Return the command index of last command for which response received + * @param SDIOx: Pointer to SDIO register base + * @retval Command index of the last command response received + */ +uint8_t SDIO_GetCommandResponse(SDIO_TypeDef *SDIOx) +{ + return (uint8_t)(SDIOx->RESPCMD); +} + + +/** + * @brief Return the response received from the card for the last command + * @param SDIO_RESP: Specifies the SDIO response register. + * This parameter can be one of the following values: + * @arg SDIO_RESP1: Response Register 1 + * @arg SDIO_RESP2: Response Register 2 + * @arg SDIO_RESP3: Response Register 3 + * @arg SDIO_RESP4: Response Register 4 + * @retval The Corresponding response register value + */ +uint32_t SDIO_GetResponse(uint32_t SDIO_RESP) +{ + __IO uint32_t tmp = 0; + + /* Check the parameters */ + assert_param(IS_SDIO_RESP(SDIO_RESP)); + + /* Get the response */ + tmp = SDIO_RESP_ADDR + SDIO_RESP; + + return (*(__IO uint32_t *) tmp); +} + +/** + * @brief Configure the SDIO data path according to the specified + * parameters in the SDIO_DataInitTypeDef. + * @param SDIOx: Pointer to SDIO register base + * @param SDIO_DataInitStruct : pointer to a SDIO_DataInitTypeDef structure + * that contains the configuration information for the SDIO command. + * @retval HAL status + */ +HAL_StatusTypeDef SDIO_DataConfig(SDIO_TypeDef *SDIOx, SDIO_DataInitTypeDef* SDIO_DataInitStruct) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_SDIO_DATA_LENGTH(SDIO_DataInitStruct->DataLength)); + assert_param(IS_SDIO_BLOCK_SIZE(SDIO_DataInitStruct->DataBlockSize)); + assert_param(IS_SDIO_TRANSFER_DIR(SDIO_DataInitStruct->TransferDir)); + assert_param(IS_SDIO_TRANSFER_MODE(SDIO_DataInitStruct->TransferMode)); + assert_param(IS_SDIO_DPSM(SDIO_DataInitStruct->DPSM)); + + /* Set the SDIO Data Timeout value */ + SDIOx->DTIMER = SDIO_DataInitStruct->DataTimeOut; + + /* Set the SDIO DataLength value */ + SDIOx->DLEN = SDIO_DataInitStruct->DataLength; + + /* Set the SDIO data configuration parameters */ + tmpreg |= (uint32_t)(SDIO_DataInitStruct->DataBlockSize |\ + SDIO_DataInitStruct->TransferDir |\ + SDIO_DataInitStruct->TransferMode |\ + SDIO_DataInitStruct->DPSM); + + /* Write to SDIO DCTRL */ + MODIFY_REG(SDIOx->DCTRL, DCTRL_CLEAR_MASK, tmpreg); + + return HAL_OK; + +} + +/** + * @brief Returns number of remaining data bytes to be transferred. + * @param SDIOx: Pointer to SDIO register base + * @retval Number of remaining data bytes to be transferred + */ +uint32_t SDIO_GetDataCounter(SDIO_TypeDef *SDIOx) +{ + return (SDIOx->DCOUNT); +} + +/** + * @brief Get the FIFO data + * @param SDIOx: Pointer to SDIO register base + * @retval Data received + */ +uint32_t SDIO_GetFIFOCount(SDIO_TypeDef *SDIOx) +{ + return (SDIOx->FIFO); +} + + +/** + * @brief Sets one of the two options of inserting read wait interval. + * @param SDIO_ReadWaitMode: SD I/O Read Wait operation mode. + * This parameter can be: + * @arg SDIO_READ_WAIT_MODE_CLK: Read Wait control by stopping SDIOCLK + * @arg SDIO_READ_WAIT_MODE_DATA2: Read Wait control using SDIO_DATA2 + * @retval None + */ +HAL_StatusTypeDef SDIO_SetSDIOReadWaitMode(uint32_t SDIO_ReadWaitMode) +{ + /* Check the parameters */ + assert_param(IS_SDIO_READWAIT_MODE(SDIO_ReadWaitMode)); + + *(__IO uint32_t *)DCTRL_RWMOD_BB = SDIO_ReadWaitMode; + + return HAL_OK; +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* STM32L151xD || STM32L152xD || STM32L162xD */ + +#endif /* (HAL_SD_MODULE_ENABLED) || (HAL_MMC_MODULE_ENABLED) */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_ll_spi.c b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_ll_spi.c new file mode 100755 index 0000000..03c6894 --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_ll_spi.c @@ -0,0 +1,553 @@ +/** + ****************************************************************************** + * @file stm32l1xx_ll_spi.c + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief SPI LL module driver. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ +#if defined(USE_FULL_LL_DRIVER) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_ll_spi.h" +#include "stm32l1xx_ll_bus.h" +#include "stm32l1xx_ll_rcc.h" + +#ifdef USE_FULL_ASSERT +#include "stm32_assert.h" +#else +#define assert_param(expr) ((void)0U) +#endif + +/** @addtogroup STM32L1xx_LL_Driver + * @{ + */ + +#if defined (SPI1) || defined (SPI2) || defined (SPI3) + +/** @addtogroup SPI_LL + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup SPI_LL_Private_Constants SPI Private Constants + * @{ + */ +/* SPI registers Masks */ +#define SPI_CR1_CLEAR_MASK (SPI_CR1_CPHA | SPI_CR1_CPOL | SPI_CR1_MSTR | \ + SPI_CR1_BR | SPI_CR1_LSBFIRST | SPI_CR1_SSI | \ + SPI_CR1_SSM | SPI_CR1_RXONLY | SPI_CR1_DFF | \ + SPI_CR1_CRCNEXT | SPI_CR1_CRCEN | SPI_CR1_BIDIOE | \ + SPI_CR1_BIDIMODE) +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup SPI_LL_Private_Macros SPI Private Macros + * @{ + */ +#define IS_LL_SPI_TRANSFER_DIRECTION(__VALUE__) (((__VALUE__) == LL_SPI_FULL_DUPLEX) \ + || ((__VALUE__) == LL_SPI_SIMPLEX_RX) \ + || ((__VALUE__) == LL_SPI_HALF_DUPLEX_RX) \ + || ((__VALUE__) == LL_SPI_HALF_DUPLEX_TX)) + +#define IS_LL_SPI_MODE(__VALUE__) (((__VALUE__) == LL_SPI_MODE_MASTER) \ + || ((__VALUE__) == LL_SPI_MODE_SLAVE)) + +#define IS_LL_SPI_DATAWIDTH(__VALUE__) (((__VALUE__) == LL_SPI_DATAWIDTH_8BIT) \ + || ((__VALUE__) == LL_SPI_DATAWIDTH_16BIT)) + +#define IS_LL_SPI_POLARITY(__VALUE__) (((__VALUE__) == LL_SPI_POLARITY_LOW) \ + || ((__VALUE__) == LL_SPI_POLARITY_HIGH)) + +#define IS_LL_SPI_PHASE(__VALUE__) (((__VALUE__) == LL_SPI_PHASE_1EDGE) \ + || ((__VALUE__) == LL_SPI_PHASE_2EDGE)) + +#define IS_LL_SPI_NSS(__VALUE__) (((__VALUE__) == LL_SPI_NSS_SOFT) \ + || ((__VALUE__) == LL_SPI_NSS_HARD_INPUT) \ + || ((__VALUE__) == LL_SPI_NSS_HARD_OUTPUT)) + +#define IS_LL_SPI_BAUDRATE(__VALUE__) (((__VALUE__) == LL_SPI_BAUDRATEPRESCALER_DIV2) \ + || ((__VALUE__) == LL_SPI_BAUDRATEPRESCALER_DIV4) \ + || ((__VALUE__) == LL_SPI_BAUDRATEPRESCALER_DIV8) \ + || ((__VALUE__) == LL_SPI_BAUDRATEPRESCALER_DIV16) \ + || ((__VALUE__) == LL_SPI_BAUDRATEPRESCALER_DIV32) \ + || ((__VALUE__) == LL_SPI_BAUDRATEPRESCALER_DIV64) \ + || ((__VALUE__) == LL_SPI_BAUDRATEPRESCALER_DIV128) \ + || ((__VALUE__) == LL_SPI_BAUDRATEPRESCALER_DIV256)) + +#define IS_LL_SPI_BITORDER(__VALUE__) (((__VALUE__) == LL_SPI_LSB_FIRST) \ + || ((__VALUE__) == LL_SPI_MSB_FIRST)) + +#define IS_LL_SPI_CRCCALCULATION(__VALUE__) (((__VALUE__) == LL_SPI_CRCCALCULATION_ENABLE) \ + || ((__VALUE__) == LL_SPI_CRCCALCULATION_DISABLE)) + +#define IS_LL_SPI_CRC_POLYNOMIAL(__VALUE__) ((__VALUE__) >= 0x1U) + +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup SPI_LL_Exported_Functions + * @{ + */ + +/** @addtogroup SPI_LL_EF_Init + * @{ + */ + +/** + * @brief De-initialize the SPI registers to their default reset values. + * @param SPIx SPI Instance + * @retval An ErrorStatus enumeration value: + * - SUCCESS: SPI registers are de-initialized + * - ERROR: SPI registers are not de-initialized + */ +ErrorStatus LL_SPI_DeInit(SPI_TypeDef *SPIx) +{ + ErrorStatus status = ERROR; + + /* Check the parameters */ + assert_param(IS_SPI_ALL_INSTANCE(SPIx)); + +#if defined(SPI1) + if (SPIx == SPI1) + { + /* Force reset of SPI clock */ + LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_SPI1); + + /* Release reset of SPI clock */ + LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_SPI1); + + status = SUCCESS; + } +#endif /* SPI1 */ +#if defined(SPI2) + if (SPIx == SPI2) + { + /* Force reset of SPI clock */ + LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_SPI2); + + /* Release reset of SPI clock */ + LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_SPI2); + + status = SUCCESS; + } +#endif /* SPI2 */ +#if defined(SPI3) + if (SPIx == SPI3) + { + /* Force reset of SPI clock */ + LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_SPI3); + + /* Release reset of SPI clock */ + LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_SPI3); + + status = SUCCESS; + } +#endif /* SPI3 */ + + return status; +} + +/** + * @brief Initialize the SPI registers according to the specified parameters in SPI_InitStruct. + * @note As some bits in SPI configuration registers can only be written when the SPI is disabled (SPI_CR1_SPE bit =0), + * SPI IP should be in disabled state prior calling this function. Otherwise, ERROR result will be returned. + * @param SPIx SPI Instance + * @param SPI_InitStruct pointer to a @ref LL_SPI_InitTypeDef structure + * @retval An ErrorStatus enumeration value. (Return always SUCCESS) + */ +ErrorStatus LL_SPI_Init(SPI_TypeDef *SPIx, LL_SPI_InitTypeDef *SPI_InitStruct) +{ + ErrorStatus status = ERROR; + + /* Check the SPI Instance SPIx*/ + assert_param(IS_SPI_ALL_INSTANCE(SPIx)); + + /* Check the SPI parameters from SPI_InitStruct*/ + assert_param(IS_LL_SPI_TRANSFER_DIRECTION(SPI_InitStruct->TransferDirection)); + assert_param(IS_LL_SPI_MODE(SPI_InitStruct->Mode)); + assert_param(IS_LL_SPI_DATAWIDTH(SPI_InitStruct->DataWidth)); + assert_param(IS_LL_SPI_POLARITY(SPI_InitStruct->ClockPolarity)); + assert_param(IS_LL_SPI_PHASE(SPI_InitStruct->ClockPhase)); + assert_param(IS_LL_SPI_NSS(SPI_InitStruct->NSS)); + assert_param(IS_LL_SPI_BAUDRATE(SPI_InitStruct->BaudRate)); + assert_param(IS_LL_SPI_BITORDER(SPI_InitStruct->BitOrder)); + assert_param(IS_LL_SPI_CRCCALCULATION(SPI_InitStruct->CRCCalculation)); + + if (LL_SPI_IsEnabled(SPIx) == 0x00000000U) + { + /*---------------------------- SPIx CR1 Configuration ------------------------ + * Configure SPIx CR1 with parameters: + * - TransferDirection: SPI_CR1_BIDIMODE, SPI_CR1_BIDIOE and SPI_CR1_RXONLY bits + * - Master/Slave Mode: SPI_CR1_MSTR bit + * - DataWidth: SPI_CR1_DFF bit + * - ClockPolarity: SPI_CR1_CPOL bit + * - ClockPhase: SPI_CR1_CPHA bit + * - NSS management: SPI_CR1_SSM bit + * - BaudRate prescaler: SPI_CR1_BR[2:0] bits + * - BitOrder: SPI_CR1_LSBFIRST bit + * - CRCCalculation: SPI_CR1_CRCEN bit + */ + MODIFY_REG(SPIx->CR1, + SPI_CR1_CLEAR_MASK, + SPI_InitStruct->TransferDirection | SPI_InitStruct->Mode | SPI_InitStruct->DataWidth | + SPI_InitStruct->ClockPolarity | SPI_InitStruct->ClockPhase | + SPI_InitStruct->NSS | SPI_InitStruct->BaudRate | + SPI_InitStruct->BitOrder | SPI_InitStruct->CRCCalculation); + + /*---------------------------- SPIx CR2 Configuration ------------------------ + * Configure SPIx CR2 with parameters: + * - NSS management: SSOE bit + */ + MODIFY_REG(SPIx->CR2, SPI_CR2_SSOE, (SPI_InitStruct->NSS >> 16U)); + + /*---------------------------- SPIx CRCPR Configuration ---------------------- + * Configure SPIx CRCPR with parameters: + * - CRCPoly: CRCPOLY[15:0] bits + */ + if (SPI_InitStruct->CRCCalculation == LL_SPI_CRCCALCULATION_ENABLE) + { + assert_param(IS_LL_SPI_CRC_POLYNOMIAL(SPI_InitStruct->CRCPoly)); + LL_SPI_SetCRCPolynomial(SPIx, SPI_InitStruct->CRCPoly); + } + status = SUCCESS; + } + +#if defined (SPI_I2S_SUPPORT) + /* Activate the SPI mode (Reset I2SMOD bit in I2SCFGR register) */ + CLEAR_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_I2SMOD); +#endif /* SPI_I2S_SUPPORT */ + return status; +} + +/** + * @brief Set each @ref LL_SPI_InitTypeDef field to default value. + * @param SPI_InitStruct pointer to a @ref LL_SPI_InitTypeDef structure + * whose fields will be set to default values. + * @retval None + */ +void LL_SPI_StructInit(LL_SPI_InitTypeDef *SPI_InitStruct) +{ + /* Set SPI_InitStruct fields to default values */ + SPI_InitStruct->TransferDirection = LL_SPI_FULL_DUPLEX; + SPI_InitStruct->Mode = LL_SPI_MODE_SLAVE; + SPI_InitStruct->DataWidth = LL_SPI_DATAWIDTH_8BIT; + SPI_InitStruct->ClockPolarity = LL_SPI_POLARITY_LOW; + SPI_InitStruct->ClockPhase = LL_SPI_PHASE_1EDGE; + SPI_InitStruct->NSS = LL_SPI_NSS_HARD_INPUT; + SPI_InitStruct->BaudRate = LL_SPI_BAUDRATEPRESCALER_DIV2; + SPI_InitStruct->BitOrder = LL_SPI_MSB_FIRST; + SPI_InitStruct->CRCCalculation = LL_SPI_CRCCALCULATION_DISABLE; + SPI_InitStruct->CRCPoly = 7U; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#if defined(SPI_I2S_SUPPORT) +/** @addtogroup I2S_LL + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @defgroup I2S_LL_Private_Constants I2S Private Constants + * @{ + */ +/* I2S registers Masks */ +#define I2S_I2SCFGR_CLEAR_MASK (SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN | \ + SPI_I2SCFGR_CKPOL | SPI_I2SCFGR_I2SSTD | \ + SPI_I2SCFGR_I2SCFG | SPI_I2SCFGR_I2SMOD ) + +#define I2S_I2SPR_CLEAR_MASK 0x0002U +/** + * @} + */ +/* Private macros ------------------------------------------------------------*/ +/** @defgroup I2S_LL_Private_Macros I2S Private Macros + * @{ + */ + +#define IS_LL_I2S_DATAFORMAT(__VALUE__) (((__VALUE__) == LL_I2S_DATAFORMAT_16B) \ + || ((__VALUE__) == LL_I2S_DATAFORMAT_16B_EXTENDED) \ + || ((__VALUE__) == LL_I2S_DATAFORMAT_24B) \ + || ((__VALUE__) == LL_I2S_DATAFORMAT_32B)) + +#define IS_LL_I2S_CPOL(__VALUE__) (((__VALUE__) == LL_I2S_POLARITY_LOW) \ + || ((__VALUE__) == LL_I2S_POLARITY_HIGH)) + +#define IS_LL_I2S_STANDARD(__VALUE__) (((__VALUE__) == LL_I2S_STANDARD_PHILIPS) \ + || ((__VALUE__) == LL_I2S_STANDARD_MSB) \ + || ((__VALUE__) == LL_I2S_STANDARD_LSB) \ + || ((__VALUE__) == LL_I2S_STANDARD_PCM_SHORT) \ + || ((__VALUE__) == LL_I2S_STANDARD_PCM_LONG)) + +#define IS_LL_I2S_MODE(__VALUE__) (((__VALUE__) == LL_I2S_MODE_SLAVE_TX) \ + || ((__VALUE__) == LL_I2S_MODE_SLAVE_RX) \ + || ((__VALUE__) == LL_I2S_MODE_MASTER_TX) \ + || ((__VALUE__) == LL_I2S_MODE_MASTER_RX)) + +#define IS_LL_I2S_MCLK_OUTPUT(__VALUE__) (((__VALUE__) == LL_I2S_MCLK_OUTPUT_ENABLE) \ + || ((__VALUE__) == LL_I2S_MCLK_OUTPUT_DISABLE)) + +#define IS_LL_I2S_AUDIO_FREQ(__VALUE__) ((((__VALUE__) >= LL_I2S_AUDIOFREQ_8K) \ + && ((__VALUE__) <= LL_I2S_AUDIOFREQ_192K)) \ + || ((__VALUE__) == LL_I2S_AUDIOFREQ_DEFAULT)) + +#define IS_LL_I2S_PRESCALER_LINEAR(__VALUE__) ((__VALUE__) >= 0x2U) + +#define IS_LL_I2S_PRESCALER_PARITY(__VALUE__) (((__VALUE__) == LL_I2S_PRESCALER_PARITY_EVEN) \ + || ((__VALUE__) == LL_I2S_PRESCALER_PARITY_ODD)) +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup I2S_LL_Exported_Functions + * @{ + */ + +/** @addtogroup I2S_LL_EF_Init + * @{ + */ + +/** + * @brief De-initialize the SPI/I2S registers to their default reset values. + * @param SPIx SPI Instance + * @retval An ErrorStatus enumeration value: + * - SUCCESS: SPI registers are de-initialized + * - ERROR: SPI registers are not de-initialized + */ +ErrorStatus LL_I2S_DeInit(SPI_TypeDef *SPIx) +{ + return LL_SPI_DeInit(SPIx); +} + +/** + * @brief Initializes the SPI/I2S registers according to the specified parameters in I2S_InitStruct. + * @note As some bits in SPI configuration registers can only be written when the SPI is disabled (SPI_CR1_SPE bit =0), + * SPI IP should be in disabled state prior calling this function. Otherwise, ERROR result will be returned. + * @param SPIx SPI Instance + * @param I2S_InitStruct pointer to a @ref LL_I2S_InitTypeDef structure + * @retval An ErrorStatus enumeration value: + * - SUCCESS: SPI registers are Initialized + * - ERROR: SPI registers are not Initialized + */ +ErrorStatus LL_I2S_Init(SPI_TypeDef *SPIx, LL_I2S_InitTypeDef *I2S_InitStruct) +{ + uint16_t i2sdiv = 2U, i2sodd = 0U, packetlength = 1U; + uint32_t tmp = 0U; + LL_RCC_ClocksTypeDef rcc_clocks; + uint32_t sourceclock = 0U; + ErrorStatus status = ERROR; + + /* Check the I2S parameters */ + assert_param(IS_I2S_ALL_INSTANCE(SPIx)); + assert_param(IS_LL_I2S_MODE(I2S_InitStruct->Mode)); + assert_param(IS_LL_I2S_STANDARD(I2S_InitStruct->Standard)); + assert_param(IS_LL_I2S_DATAFORMAT(I2S_InitStruct->DataFormat)); + assert_param(IS_LL_I2S_MCLK_OUTPUT(I2S_InitStruct->MCLKOutput)); + assert_param(IS_LL_I2S_AUDIO_FREQ(I2S_InitStruct->AudioFreq)); + assert_param(IS_LL_I2S_CPOL(I2S_InitStruct->ClockPolarity)); + + if (LL_I2S_IsEnabled(SPIx) == 0x00000000U) + { + /*---------------------------- SPIx I2SCFGR Configuration -------------------- + * Configure SPIx I2SCFGR with parameters: + * - Mode: SPI_I2SCFGR_I2SCFG[1:0] bit + * - Standard: SPI_I2SCFGR_I2SSTD[1:0] and SPI_I2SCFGR_PCMSYNC bits + * - DataFormat: SPI_I2SCFGR_CHLEN and SPI_I2SCFGR_DATLEN bits + * - ClockPolarity: SPI_I2SCFGR_CKPOL bit + */ + + /* Write to SPIx I2SCFGR */ + MODIFY_REG(SPIx->I2SCFGR, + I2S_I2SCFGR_CLEAR_MASK, + I2S_InitStruct->Mode | I2S_InitStruct->Standard | + I2S_InitStruct->DataFormat | I2S_InitStruct->ClockPolarity | + SPI_I2SCFGR_I2SMOD); + + /*---------------------------- SPIx I2SPR Configuration ---------------------- + * Configure SPIx I2SPR with parameters: + * - MCLKOutput: SPI_I2SPR_MCKOE bit + * - AudioFreq: SPI_I2SPR_I2SDIV[7:0] and SPI_I2SPR_ODD bits + */ + + /* If the default value has to be written, reinitialize i2sdiv and i2sodd*/ + if (I2S_InitStruct->AudioFreq == LL_I2S_AUDIOFREQ_DEFAULT) + { + i2sodd = 0U; + i2sdiv = 2U; + } + /* If the requested audio frequency is not the default, compute the prescaler */ + else + { + /* Check the frame length (For the Prescaler computing) */ + if (I2S_InitStruct->DataFormat == LL_I2S_DATAFORMAT_16B) + { + /* Packet length is 16 bits */ + packetlength = 1U; + } + else + { + /* Packet length is 32 bits */ + packetlength = 2U; + } + + /* I2S Clock source is System clock: Get System Clock frequency */ + LL_RCC_GetSystemClocksFreq(&rcc_clocks); + + /* Get the source clock value: based on System Clock value */ + sourceclock = rcc_clocks.SYSCLK_Frequency; + + /* Compute the Real divider depending on the MCLK output state with a floating point */ + if (I2S_InitStruct->MCLKOutput == LL_I2S_MCLK_OUTPUT_ENABLE) + { + /* MCLK output is enabled */ + tmp = (uint16_t)(((((sourceclock / 256U) * 10U) / I2S_InitStruct->AudioFreq)) + 5U); + } + else + { + /* MCLK output is disabled */ + tmp = (uint16_t)(((((sourceclock / (32U * packetlength)) * 10U) / I2S_InitStruct->AudioFreq)) + 5U); + } + + /* Remove the floating point */ + tmp = tmp / 10U; + + /* Check the parity of the divider */ + i2sodd = (uint16_t)(tmp & (uint16_t)0x0001U); + + /* Compute the i2sdiv prescaler */ + i2sdiv = (uint16_t)((tmp - i2sodd) / 2U); + + /* Get the Mask for the Odd bit (SPI_I2SPR[8]) register */ + i2sodd = (uint16_t)(i2sodd << 8U); + } + + /* Test if the divider is 1 or 0 or greater than 0xFF */ + if ((i2sdiv < 2U) || (i2sdiv > 0xFFU)) + { + /* Set the default values */ + i2sdiv = 2U; + i2sodd = 0U; + } + + /* Write to SPIx I2SPR register the computed value */ + WRITE_REG(SPIx->I2SPR, i2sdiv | i2sodd | I2S_InitStruct->MCLKOutput); + + status = SUCCESS; + } + return status; +} + +/** + * @brief Set each @ref LL_I2S_InitTypeDef field to default value. + * @param I2S_InitStruct pointer to a @ref LL_I2S_InitTypeDef structure + * whose fields will be set to default values. + * @retval None + */ +void LL_I2S_StructInit(LL_I2S_InitTypeDef *I2S_InitStruct) +{ + /*--------------- Reset I2S init structure parameters values -----------------*/ + I2S_InitStruct->Mode = LL_I2S_MODE_SLAVE_TX; + I2S_InitStruct->Standard = LL_I2S_STANDARD_PHILIPS; + I2S_InitStruct->DataFormat = LL_I2S_DATAFORMAT_16B; + I2S_InitStruct->MCLKOutput = LL_I2S_MCLK_OUTPUT_DISABLE; + I2S_InitStruct->AudioFreq = LL_I2S_AUDIOFREQ_DEFAULT; + I2S_InitStruct->ClockPolarity = LL_I2S_POLARITY_LOW; +} + +/** + * @brief Set linear and parity prescaler. + * @note To calculate value of PrescalerLinear(I2SDIV[7:0] bits) and PrescalerParity(ODD bit)\n + * Check Audio frequency table and formulas inside Reference Manual (SPI/I2S). + * @param SPIx SPI Instance + * @param PrescalerLinear value: Min_Data=0x02 and Max_Data=0xFF. + * @param PrescalerParity This parameter can be one of the following values: + * @arg @ref LL_I2S_PRESCALER_PARITY_EVEN + * @arg @ref LL_I2S_PRESCALER_PARITY_ODD + * @retval None + */ +void LL_I2S_ConfigPrescaler(SPI_TypeDef *SPIx, uint32_t PrescalerLinear, uint32_t PrescalerParity) +{ + /* Check the I2S parameters */ + assert_param(IS_I2S_ALL_INSTANCE(SPIx)); + assert_param(IS_LL_I2S_PRESCALER_LINEAR(PrescalerLinear)); + assert_param(IS_LL_I2S_PRESCALER_PARITY(PrescalerParity)); + + /* Write to SPIx I2SPR */ + MODIFY_REG(SPIx->I2SPR, SPI_I2SPR_I2SDIV | SPI_I2SPR_ODD, PrescalerLinear | (PrescalerParity << 8U)); +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +#endif /* SPI_I2S_SUPPORT */ + +#endif /* defined (SPI1) || defined (SPI2) || defined (SPI3) */ + +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_ll_tim.c b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_ll_tim.c new file mode 100755 index 0000000..6a62139 --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_ll_tim.c @@ -0,0 +1,889 @@ +/** + ****************************************************************************** + * @file stm32l1xx_ll_tim.c + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief TIM LL module driver. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ +#if defined(USE_FULL_LL_DRIVER) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_ll_tim.h" +#include "stm32l1xx_ll_bus.h" + +#ifdef USE_FULL_ASSERT +#include "stm32_assert.h" +#else +#define assert_param(expr) ((void)0U) +#endif + +/** @addtogroup STM32L1xx_LL_Driver + * @{ + */ + +#if defined (TIM2) || defined (TIM3) || defined (TIM4) || defined (TIM5) || defined (TIM9) || defined (TIM10) || defined (TIM11) || defined (TIM6) || defined (TIM7) + +/** @addtogroup TIM_LL + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/** @addtogroup TIM_LL_Private_Macros + * @{ + */ +#define IS_LL_TIM_COUNTERMODE(__VALUE__) (((__VALUE__) == LL_TIM_COUNTERMODE_UP) \ + || ((__VALUE__) == LL_TIM_COUNTERMODE_DOWN) \ + || ((__VALUE__) == LL_TIM_COUNTERMODE_CENTER_UP) \ + || ((__VALUE__) == LL_TIM_COUNTERMODE_CENTER_DOWN) \ + || ((__VALUE__) == LL_TIM_COUNTERMODE_CENTER_UP_DOWN)) + +#define IS_LL_TIM_CLOCKDIVISION(__VALUE__) (((__VALUE__) == LL_TIM_CLOCKDIVISION_DIV1) \ + || ((__VALUE__) == LL_TIM_CLOCKDIVISION_DIV2) \ + || ((__VALUE__) == LL_TIM_CLOCKDIVISION_DIV4)) + +#define IS_LL_TIM_OCMODE(__VALUE__) (((__VALUE__) == LL_TIM_OCMODE_FROZEN) \ + || ((__VALUE__) == LL_TIM_OCMODE_ACTIVE) \ + || ((__VALUE__) == LL_TIM_OCMODE_INACTIVE) \ + || ((__VALUE__) == LL_TIM_OCMODE_TOGGLE) \ + || ((__VALUE__) == LL_TIM_OCMODE_FORCED_INACTIVE) \ + || ((__VALUE__) == LL_TIM_OCMODE_FORCED_ACTIVE) \ + || ((__VALUE__) == LL_TIM_OCMODE_PWM1) \ + || ((__VALUE__) == LL_TIM_OCMODE_PWM2)) + +#define IS_LL_TIM_OCSTATE(__VALUE__) (((__VALUE__) == LL_TIM_OCSTATE_DISABLE) \ + || ((__VALUE__) == LL_TIM_OCSTATE_ENABLE)) + +#define IS_LL_TIM_OCPOLARITY(__VALUE__) (((__VALUE__) == LL_TIM_OCPOLARITY_HIGH) \ + || ((__VALUE__) == LL_TIM_OCPOLARITY_LOW)) + +#define IS_LL_TIM_ACTIVEINPUT(__VALUE__) (((__VALUE__) == LL_TIM_ACTIVEINPUT_DIRECTTI) \ + || ((__VALUE__) == LL_TIM_ACTIVEINPUT_INDIRECTTI) \ + || ((__VALUE__) == LL_TIM_ACTIVEINPUT_TRC)) + +#define IS_LL_TIM_ICPSC(__VALUE__) (((__VALUE__) == LL_TIM_ICPSC_DIV1) \ + || ((__VALUE__) == LL_TIM_ICPSC_DIV2) \ + || ((__VALUE__) == LL_TIM_ICPSC_DIV4) \ + || ((__VALUE__) == LL_TIM_ICPSC_DIV8)) + +#define IS_LL_TIM_IC_FILTER(__VALUE__) (((__VALUE__) == LL_TIM_IC_FILTER_FDIV1) \ + || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV1_N2) \ + || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV1_N4) \ + || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV1_N8) \ + || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV2_N6) \ + || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV2_N8) \ + || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV4_N6) \ + || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV4_N8) \ + || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV8_N6) \ + || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV8_N8) \ + || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV16_N5) \ + || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV16_N6) \ + || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV16_N8) \ + || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV32_N5) \ + || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV32_N6) \ + || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV32_N8)) + +#define IS_LL_TIM_IC_POLARITY(__VALUE__) (((__VALUE__) == LL_TIM_IC_POLARITY_RISING) \ + || ((__VALUE__) == LL_TIM_IC_POLARITY_FALLING) \ + || ((__VALUE__) == LL_TIM_IC_POLARITY_BOTHEDGE)) + +#define IS_LL_TIM_ENCODERMODE(__VALUE__) (((__VALUE__) == LL_TIM_ENCODERMODE_X2_TI1) \ + || ((__VALUE__) == LL_TIM_ENCODERMODE_X2_TI2) \ + || ((__VALUE__) == LL_TIM_ENCODERMODE_X4_TI12)) + +#define IS_LL_TIM_IC_POLARITY_ENCODER(__VALUE__) (((__VALUE__) == LL_TIM_IC_POLARITY_RISING) \ + || ((__VALUE__) == LL_TIM_IC_POLARITY_FALLING)) +/** + * @} + */ + + +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup TIM_LL_Private_Functions TIM Private Functions + * @{ + */ +static ErrorStatus OC1Config(TIM_TypeDef *TIMx, LL_TIM_OC_InitTypeDef *TIM_OCInitStruct); +static ErrorStatus OC2Config(TIM_TypeDef *TIMx, LL_TIM_OC_InitTypeDef *TIM_OCInitStruct); +static ErrorStatus OC3Config(TIM_TypeDef *TIMx, LL_TIM_OC_InitTypeDef *TIM_OCInitStruct); +static ErrorStatus OC4Config(TIM_TypeDef *TIMx, LL_TIM_OC_InitTypeDef *TIM_OCInitStruct); +static ErrorStatus IC1Config(TIM_TypeDef *TIMx, LL_TIM_IC_InitTypeDef *TIM_ICInitStruct); +static ErrorStatus IC2Config(TIM_TypeDef *TIMx, LL_TIM_IC_InitTypeDef *TIM_ICInitStruct); +static ErrorStatus IC3Config(TIM_TypeDef *TIMx, LL_TIM_IC_InitTypeDef *TIM_ICInitStruct); +static ErrorStatus IC4Config(TIM_TypeDef *TIMx, LL_TIM_IC_InitTypeDef *TIM_ICInitStruct); +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup TIM_LL_Exported_Functions + * @{ + */ + +/** @addtogroup TIM_LL_EF_Init + * @{ + */ + +/** + * @brief Set TIMx registers to their reset values. + * @param TIMx Timer instance + * @retval An ErrorStatus enumeration value: + * - SUCCESS: TIMx registers are de-initialized + * - ERROR: invalid TIMx instance + */ +ErrorStatus LL_TIM_DeInit(TIM_TypeDef *TIMx) +{ + ErrorStatus result = SUCCESS; + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(TIMx)); + + if (TIMx == TIM2) + { + LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_TIM2); + LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_TIM2); + } +#if defined(TIM3) + else if (TIMx == TIM3) + { + LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_TIM3); + LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_TIM3); + } +#endif /* TIM3 */ +#if defined(TIM4) + else if (TIMx == TIM4) + { + LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_TIM4); + LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_TIM4); + } +#endif /* TIM4 */ +#if defined(TIM5) + else if (TIMx == TIM5) + { + LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_TIM5); + LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_TIM5); + } +#endif /* TIM5 */ +#if defined(TIM6) + else if (TIMx == TIM6) + { + LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_TIM6); + LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_TIM6); + } +#endif /* TIM6 */ +#if defined(TIM7) + else if (TIMx == TIM7) + { + LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_TIM7); + LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_TIM7); + } +#endif /* TIM7 */ +#if defined(TIM9) + else if (TIMx == TIM9) + { + LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_TIM9); + LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_TIM9); + } +#endif /* TIM9 */ +#if defined(TIM10) + else if (TIMx == TIM10) + { + LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_TIM10); + LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_TIM10); + } +#endif /* TIM10 */ +#if defined(TIM11) + else if (TIMx == TIM11) + { + LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_TIM11); + LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_TIM11); + } +#endif /* TIM11 */ + else + { + result = ERROR; + } + + return result; +} + +/** + * @brief Set the fields of the time base unit configuration data structure + * to their default values. + * @param TIM_InitStruct pointer to a @ref LL_TIM_InitTypeDef structure (time base unit configuration data structure) + * @retval None + */ +void LL_TIM_StructInit(LL_TIM_InitTypeDef *TIM_InitStruct) +{ + /* Set the default configuration */ + TIM_InitStruct->Prescaler = (uint16_t)0x0000U; + TIM_InitStruct->CounterMode = LL_TIM_COUNTERMODE_UP; + TIM_InitStruct->Autoreload = (uint32_t)0xFFFFFFFFU; + TIM_InitStruct->ClockDivision = LL_TIM_CLOCKDIVISION_DIV1; +} + +/** + * @brief Configure the TIMx time base unit. + * @param TIMx Timer Instance + * @param TIM_InitStruct pointer to a @ref LL_TIM_InitTypeDef structure (TIMx time base unit configuration data structure) + * @retval An ErrorStatus enumeration value: + * - SUCCESS: TIMx registers are de-initialized + * - ERROR: not applicable + */ +ErrorStatus LL_TIM_Init(TIM_TypeDef *TIMx, LL_TIM_InitTypeDef *TIM_InitStruct) +{ + uint32_t tmpcr1 = 0U; + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(TIMx)); + assert_param(IS_LL_TIM_COUNTERMODE(TIM_InitStruct->CounterMode)); + assert_param(IS_LL_TIM_CLOCKDIVISION(TIM_InitStruct->ClockDivision)); + + tmpcr1 = LL_TIM_ReadReg(TIMx, CR1); + + if (IS_TIM_COUNTER_MODE_SELECT_INSTANCE(TIMx)) + { + /* Select the Counter Mode */ + MODIFY_REG(tmpcr1, (TIM_CR1_DIR | TIM_CR1_CMS), TIM_InitStruct->CounterMode); + } + + if (IS_TIM_CLOCK_DIVISION_INSTANCE(TIMx)) + { + /* Set the clock division */ + MODIFY_REG(tmpcr1, TIM_CR1_CKD, TIM_InitStruct->ClockDivision); + } + + /* Write to TIMx CR1 */ + LL_TIM_WriteReg(TIMx, CR1, tmpcr1); + + /* Set the Autoreload value */ + LL_TIM_SetAutoReload(TIMx, TIM_InitStruct->Autoreload); + + /* Set the Prescaler value */ + LL_TIM_SetPrescaler(TIMx, TIM_InitStruct->Prescaler); + /* Generate an update event to reload the Prescaler + and the repetition counter value (if applicable) immediately */ + LL_TIM_GenerateEvent_UPDATE(TIMx); + + return SUCCESS; +} + +/** + * @brief Set the fields of the TIMx output channel configuration data + * structure to their default values. + * @param TIM_OC_InitStruct pointer to a @ref LL_TIM_OC_InitTypeDef structure (the output channel configuration data structure) + * @retval None + */ +void LL_TIM_OC_StructInit(LL_TIM_OC_InitTypeDef *TIM_OC_InitStruct) +{ + /* Set the default configuration */ + TIM_OC_InitStruct->OCMode = LL_TIM_OCMODE_FROZEN; + TIM_OC_InitStruct->OCState = LL_TIM_OCSTATE_DISABLE; + TIM_OC_InitStruct->CompareValue = (uint32_t)0x00000000U; + TIM_OC_InitStruct->OCPolarity = LL_TIM_OCPOLARITY_HIGH; +} + +/** + * @brief Configure the TIMx output channel. + * @param TIMx Timer Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @param TIM_OC_InitStruct pointer to a @ref LL_TIM_OC_InitTypeDef structure (TIMx output channel configuration data structure) + * @retval An ErrorStatus enumeration value: + * - SUCCESS: TIMx output channel is initialized + * - ERROR: TIMx output channel is not initialized + */ +ErrorStatus LL_TIM_OC_Init(TIM_TypeDef *TIMx, uint32_t Channel, LL_TIM_OC_InitTypeDef *TIM_OC_InitStruct) +{ + ErrorStatus result = ERROR; + + switch (Channel) + { + case LL_TIM_CHANNEL_CH1: + result = OC1Config(TIMx, TIM_OC_InitStruct); + break; + case LL_TIM_CHANNEL_CH2: + result = OC2Config(TIMx, TIM_OC_InitStruct); + break; + case LL_TIM_CHANNEL_CH3: + result = OC3Config(TIMx, TIM_OC_InitStruct); + break; + case LL_TIM_CHANNEL_CH4: + result = OC4Config(TIMx, TIM_OC_InitStruct); + break; + default: + break; + } + + return result; +} + +/** + * @brief Set the fields of the TIMx input channel configuration data + * structure to their default values. + * @param TIM_ICInitStruct pointer to a @ref LL_TIM_IC_InitTypeDef structure (the input channel configuration data structure) + * @retval None + */ +void LL_TIM_IC_StructInit(LL_TIM_IC_InitTypeDef *TIM_ICInitStruct) +{ + /* Set the default configuration */ + TIM_ICInitStruct->ICPolarity = LL_TIM_IC_POLARITY_RISING; + TIM_ICInitStruct->ICActiveInput = LL_TIM_ACTIVEINPUT_DIRECTTI; + TIM_ICInitStruct->ICPrescaler = LL_TIM_ICPSC_DIV1; + TIM_ICInitStruct->ICFilter = LL_TIM_IC_FILTER_FDIV1; +} + +/** + * @brief Configure the TIMx input channel. + * @param TIMx Timer Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @param TIM_IC_InitStruct pointer to a @ref LL_TIM_IC_InitTypeDef structure (TIMx input channel configuration data structure) + * @retval An ErrorStatus enumeration value: + * - SUCCESS: TIMx output channel is initialized + * - ERROR: TIMx output channel is not initialized + */ +ErrorStatus LL_TIM_IC_Init(TIM_TypeDef *TIMx, uint32_t Channel, LL_TIM_IC_InitTypeDef *TIM_IC_InitStruct) +{ + ErrorStatus result = ERROR; + + switch (Channel) + { + case LL_TIM_CHANNEL_CH1: + result = IC1Config(TIMx, TIM_IC_InitStruct); + break; + case LL_TIM_CHANNEL_CH2: + result = IC2Config(TIMx, TIM_IC_InitStruct); + break; + case LL_TIM_CHANNEL_CH3: + result = IC3Config(TIMx, TIM_IC_InitStruct); + break; + case LL_TIM_CHANNEL_CH4: + result = IC4Config(TIMx, TIM_IC_InitStruct); + break; + default: + break; + } + + return result; +} + +/** + * @brief Fills each TIM_EncoderInitStruct field with its default value + * @param TIM_EncoderInitStruct pointer to a @ref LL_TIM_ENCODER_InitTypeDef structure (encoder interface configuration data structure) + * @retval None + */ +void LL_TIM_ENCODER_StructInit(LL_TIM_ENCODER_InitTypeDef *TIM_EncoderInitStruct) +{ + /* Set the default configuration */ + TIM_EncoderInitStruct->EncoderMode = LL_TIM_ENCODERMODE_X2_TI1; + TIM_EncoderInitStruct->IC1Polarity = LL_TIM_IC_POLARITY_RISING; + TIM_EncoderInitStruct->IC1ActiveInput = LL_TIM_ACTIVEINPUT_DIRECTTI; + TIM_EncoderInitStruct->IC1Prescaler = LL_TIM_ICPSC_DIV1; + TIM_EncoderInitStruct->IC1Filter = LL_TIM_IC_FILTER_FDIV1; + TIM_EncoderInitStruct->IC2Polarity = LL_TIM_IC_POLARITY_RISING; + TIM_EncoderInitStruct->IC2ActiveInput = LL_TIM_ACTIVEINPUT_DIRECTTI; + TIM_EncoderInitStruct->IC2Prescaler = LL_TIM_ICPSC_DIV1; + TIM_EncoderInitStruct->IC2Filter = LL_TIM_IC_FILTER_FDIV1; +} + +/** + * @brief Configure the encoder interface of the timer instance. + * @param TIMx Timer Instance + * @param TIM_EncoderInitStruct pointer to a @ref LL_TIM_ENCODER_InitTypeDef structure (TIMx encoder interface configuration data structure) + * @retval An ErrorStatus enumeration value: + * - SUCCESS: TIMx registers are de-initialized + * - ERROR: not applicable + */ +ErrorStatus LL_TIM_ENCODER_Init(TIM_TypeDef *TIMx, LL_TIM_ENCODER_InitTypeDef *TIM_EncoderInitStruct) +{ + uint32_t tmpccmr1 = 0U; + uint32_t tmpccer = 0U; + + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(TIMx)); + assert_param(IS_LL_TIM_ENCODERMODE(TIM_EncoderInitStruct->EncoderMode)); + assert_param(IS_LL_TIM_IC_POLARITY_ENCODER(TIM_EncoderInitStruct->IC1Polarity)); + assert_param(IS_LL_TIM_ACTIVEINPUT(TIM_EncoderInitStruct->IC1ActiveInput)); + assert_param(IS_LL_TIM_ICPSC(TIM_EncoderInitStruct->IC1Prescaler)); + assert_param(IS_LL_TIM_IC_FILTER(TIM_EncoderInitStruct->IC1Filter)); + assert_param(IS_LL_TIM_IC_POLARITY_ENCODER(TIM_EncoderInitStruct->IC2Polarity)); + assert_param(IS_LL_TIM_ACTIVEINPUT(TIM_EncoderInitStruct->IC2ActiveInput)); + assert_param(IS_LL_TIM_ICPSC(TIM_EncoderInitStruct->IC2Prescaler)); + assert_param(IS_LL_TIM_IC_FILTER(TIM_EncoderInitStruct->IC2Filter)); + + /* Disable the CC1 and CC2: Reset the CC1E and CC2E Bits */ + TIMx->CCER &= (uint32_t)~(TIM_CCER_CC1E | TIM_CCER_CC2E); + + /* Get the TIMx CCMR1 register value */ + tmpccmr1 = LL_TIM_ReadReg(TIMx, CCMR1); + + /* Get the TIMx CCER register value */ + tmpccer = LL_TIM_ReadReg(TIMx, CCER); + + /* Configure TI1 */ + tmpccmr1 &= (uint32_t)~(TIM_CCMR1_CC1S | TIM_CCMR1_IC1F | TIM_CCMR1_IC1PSC); + tmpccmr1 |= (uint32_t)(TIM_EncoderInitStruct->IC1ActiveInput >> 16U); + tmpccmr1 |= (uint32_t)(TIM_EncoderInitStruct->IC1Filter >> 16U); + tmpccmr1 |= (uint32_t)(TIM_EncoderInitStruct->IC1Prescaler >> 16U); + + /* Configure TI2 */ + tmpccmr1 &= (uint32_t)~(TIM_CCMR1_CC2S | TIM_CCMR1_IC2F | TIM_CCMR1_IC2PSC); + tmpccmr1 |= (uint32_t)(TIM_EncoderInitStruct->IC2ActiveInput >> 8U); + tmpccmr1 |= (uint32_t)(TIM_EncoderInitStruct->IC2Filter >> 8U); + tmpccmr1 |= (uint32_t)(TIM_EncoderInitStruct->IC2Prescaler >> 8U); + + /* Set TI1 and TI2 polarity and enable TI1 and TI2 */ + tmpccer &= (uint32_t)~(TIM_CCER_CC1P | TIM_CCER_CC1NP | TIM_CCER_CC2P | TIM_CCER_CC2NP); + tmpccer |= (uint32_t)(TIM_EncoderInitStruct->IC1Polarity); + tmpccer |= (uint32_t)(TIM_EncoderInitStruct->IC2Polarity << 4U); + tmpccer |= (uint32_t)(TIM_CCER_CC1E | TIM_CCER_CC2E); + + /* Set encoder mode */ + LL_TIM_SetEncoderMode(TIMx, TIM_EncoderInitStruct->EncoderMode); + + /* Write to TIMx CCMR1 */ + LL_TIM_WriteReg(TIMx, CCMR1, tmpccmr1); + + /* Write to TIMx CCER */ + LL_TIM_WriteReg(TIMx, CCER, tmpccer); + + return SUCCESS; +} + + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup TIM_LL_Private_Functions TIM Private Functions + * @brief Private functions + * @{ + */ +/** + * @brief Configure the TIMx output channel 1. + * @param TIMx Timer Instance + * @param TIM_OCInitStruct pointer to the the TIMx output channel 1 configuration data structure + * @retval An ErrorStatus enumeration value: + * - SUCCESS: TIMx registers are de-initialized + * - ERROR: not applicable + */ +static ErrorStatus OC1Config(TIM_TypeDef *TIMx, LL_TIM_OC_InitTypeDef *TIM_OCInitStruct) +{ + uint32_t tmpccmr1 = 0U; + uint32_t tmpccer = 0U; + uint32_t tmpcr2 = 0U; + + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(TIMx)); + assert_param(IS_LL_TIM_OCMODE(TIM_OCInitStruct->OCMode)); + assert_param(IS_LL_TIM_OCSTATE(TIM_OCInitStruct->OCState)); + assert_param(IS_LL_TIM_OCPOLARITY(TIM_OCInitStruct->OCPolarity)); + + /* Disable the Channel 1: Reset the CC1E Bit */ + CLEAR_BIT(TIMx->CCER, TIM_CCER_CC1E); + + /* Get the TIMx CCER register value */ + tmpccer = LL_TIM_ReadReg(TIMx, CCER); + + /* Get the TIMx CR2 register value */ + tmpcr2 = LL_TIM_ReadReg(TIMx, CR2); + + /* Get the TIMx CCMR1 register value */ + tmpccmr1 = LL_TIM_ReadReg(TIMx, CCMR1); + + /* Reset Capture/Compare selection Bits */ + CLEAR_BIT(tmpccmr1, TIM_CCMR1_CC1S); + + /* Set the Output Compare Mode */ + MODIFY_REG(tmpccmr1, TIM_CCMR1_OC1M, TIM_OCInitStruct->OCMode); + + /* Set the Output Compare Polarity */ + MODIFY_REG(tmpccer, TIM_CCER_CC1P, TIM_OCInitStruct->OCPolarity); + + /* Set the Output State */ + MODIFY_REG(tmpccer, TIM_CCER_CC1E, TIM_OCInitStruct->OCState); + + /* Write to TIMx CR2 */ + LL_TIM_WriteReg(TIMx, CR2, tmpcr2); + + /* Write to TIMx CCMR1 */ + LL_TIM_WriteReg(TIMx, CCMR1, tmpccmr1); + + /* Set the Capture Compare Register value */ + LL_TIM_OC_SetCompareCH1(TIMx, TIM_OCInitStruct->CompareValue); + + /* Write to TIMx CCER */ + LL_TIM_WriteReg(TIMx, CCER, tmpccer); + + return SUCCESS; +} + +/** + * @brief Configure the TIMx output channel 2. + * @param TIMx Timer Instance + * @param TIM_OCInitStruct pointer to the the TIMx output channel 2 configuration data structure + * @retval An ErrorStatus enumeration value: + * - SUCCESS: TIMx registers are de-initialized + * - ERROR: not applicable + */ +static ErrorStatus OC2Config(TIM_TypeDef *TIMx, LL_TIM_OC_InitTypeDef *TIM_OCInitStruct) +{ + uint32_t tmpccmr1 = 0U; + uint32_t tmpccer = 0U; + uint32_t tmpcr2 = 0U; + + /* Check the parameters */ + assert_param(IS_TIM_CC2_INSTANCE(TIMx)); + assert_param(IS_LL_TIM_OCMODE(TIM_OCInitStruct->OCMode)); + assert_param(IS_LL_TIM_OCSTATE(TIM_OCInitStruct->OCState)); + assert_param(IS_LL_TIM_OCPOLARITY(TIM_OCInitStruct->OCPolarity)); + + /* Disable the Channel 2: Reset the CC2E Bit */ + CLEAR_BIT(TIMx->CCER, TIM_CCER_CC2E); + + /* Get the TIMx CCER register value */ + tmpccer = LL_TIM_ReadReg(TIMx, CCER); + + /* Get the TIMx CR2 register value */ + tmpcr2 = LL_TIM_ReadReg(TIMx, CR2); + + /* Get the TIMx CCMR1 register value */ + tmpccmr1 = LL_TIM_ReadReg(TIMx, CCMR1); + + /* Reset Capture/Compare selection Bits */ + CLEAR_BIT(tmpccmr1, TIM_CCMR1_CC2S); + + /* Select the Output Compare Mode */ + MODIFY_REG(tmpccmr1, TIM_CCMR1_OC2M, TIM_OCInitStruct->OCMode << 8U); + + /* Set the Output Compare Polarity */ + MODIFY_REG(tmpccer, TIM_CCER_CC2P, TIM_OCInitStruct->OCPolarity << 4U); + + /* Set the Output State */ + MODIFY_REG(tmpccer, TIM_CCER_CC2E, TIM_OCInitStruct->OCState << 4U); + + /* Write to TIMx CR2 */ + LL_TIM_WriteReg(TIMx, CR2, tmpcr2); + + /* Write to TIMx CCMR1 */ + LL_TIM_WriteReg(TIMx, CCMR1, tmpccmr1); + + /* Set the Capture Compare Register value */ + LL_TIM_OC_SetCompareCH2(TIMx, TIM_OCInitStruct->CompareValue); + + /* Write to TIMx CCER */ + LL_TIM_WriteReg(TIMx, CCER, tmpccer); + + return SUCCESS; +} + +/** + * @brief Configure the TIMx output channel 3. + * @param TIMx Timer Instance + * @param TIM_OCInitStruct pointer to the the TIMx output channel 3 configuration data structure + * @retval An ErrorStatus enumeration value: + * - SUCCESS: TIMx registers are de-initialized + * - ERROR: not applicable + */ +static ErrorStatus OC3Config(TIM_TypeDef *TIMx, LL_TIM_OC_InitTypeDef *TIM_OCInitStruct) +{ + uint32_t tmpccmr2 = 0U; + uint32_t tmpccer = 0U; + uint32_t tmpcr2 = 0U; + + /* Check the parameters */ + assert_param(IS_TIM_CC3_INSTANCE(TIMx)); + assert_param(IS_LL_TIM_OCMODE(TIM_OCInitStruct->OCMode)); + assert_param(IS_LL_TIM_OCSTATE(TIM_OCInitStruct->OCState)); + assert_param(IS_LL_TIM_OCPOLARITY(TIM_OCInitStruct->OCPolarity)); + + /* Disable the Channel 3: Reset the CC3E Bit */ + CLEAR_BIT(TIMx->CCER, TIM_CCER_CC3E); + + /* Get the TIMx CCER register value */ + tmpccer = LL_TIM_ReadReg(TIMx, CCER); + + /* Get the TIMx CR2 register value */ + tmpcr2 = LL_TIM_ReadReg(TIMx, CR2); + + /* Get the TIMx CCMR2 register value */ + tmpccmr2 = LL_TIM_ReadReg(TIMx, CCMR2); + + /* Reset Capture/Compare selection Bits */ + CLEAR_BIT(tmpccmr2, TIM_CCMR2_CC3S); + + /* Select the Output Compare Mode */ + MODIFY_REG(tmpccmr2, TIM_CCMR2_OC3M, TIM_OCInitStruct->OCMode); + + /* Set the Output Compare Polarity */ + MODIFY_REG(tmpccer, TIM_CCER_CC3P, TIM_OCInitStruct->OCPolarity << 8U); + + /* Set the Output State */ + MODIFY_REG(tmpccer, TIM_CCER_CC3E, TIM_OCInitStruct->OCState << 8U); + + /* Write to TIMx CR2 */ + LL_TIM_WriteReg(TIMx, CR2, tmpcr2); + + /* Write to TIMx CCMR2 */ + LL_TIM_WriteReg(TIMx, CCMR2, tmpccmr2); + + /* Set the Capture Compare Register value */ + LL_TIM_OC_SetCompareCH3(TIMx, TIM_OCInitStruct->CompareValue); + + /* Write to TIMx CCER */ + LL_TIM_WriteReg(TIMx, CCER, tmpccer); + + return SUCCESS; +} + +/** + * @brief Configure the TIMx output channel 4. + * @param TIMx Timer Instance + * @param TIM_OCInitStruct pointer to the the TIMx output channel 4 configuration data structure + * @retval An ErrorStatus enumeration value: + * - SUCCESS: TIMx registers are de-initialized + * - ERROR: not applicable + */ +static ErrorStatus OC4Config(TIM_TypeDef *TIMx, LL_TIM_OC_InitTypeDef *TIM_OCInitStruct) +{ + uint32_t tmpccmr2 = 0U; + uint32_t tmpccer = 0U; + uint32_t tmpcr2 = 0U; + + /* Check the parameters */ + assert_param(IS_TIM_CC4_INSTANCE(TIMx)); + assert_param(IS_LL_TIM_OCMODE(TIM_OCInitStruct->OCMode)); + assert_param(IS_LL_TIM_OCSTATE(TIM_OCInitStruct->OCState)); + assert_param(IS_LL_TIM_OCPOLARITY(TIM_OCInitStruct->OCPolarity)); + + /* Disable the Channel 4: Reset the CC4E Bit */ + CLEAR_BIT(TIMx->CCER, TIM_CCER_CC4E); + + /* Get the TIMx CCER register value */ + tmpccer = LL_TIM_ReadReg(TIMx, CCER); + + /* Get the TIMx CR2 register value */ + tmpcr2 = LL_TIM_ReadReg(TIMx, CR2); + + /* Get the TIMx CCMR2 register value */ + tmpccmr2 = LL_TIM_ReadReg(TIMx, CCMR2); + + /* Reset Capture/Compare selection Bits */ + CLEAR_BIT(tmpccmr2, TIM_CCMR2_CC4S); + + /* Select the Output Compare Mode */ + MODIFY_REG(tmpccmr2, TIM_CCMR2_OC4M, TIM_OCInitStruct->OCMode << 8U); + + /* Set the Output Compare Polarity */ + MODIFY_REG(tmpccer, TIM_CCER_CC4P, TIM_OCInitStruct->OCPolarity << 12U); + + /* Set the Output State */ + MODIFY_REG(tmpccer, TIM_CCER_CC4E, TIM_OCInitStruct->OCState << 12U); + + /* Write to TIMx CR2 */ + LL_TIM_WriteReg(TIMx, CR2, tmpcr2); + + /* Write to TIMx CCMR2 */ + LL_TIM_WriteReg(TIMx, CCMR2, tmpccmr2); + + /* Set the Capture Compare Register value */ + LL_TIM_OC_SetCompareCH4(TIMx, TIM_OCInitStruct->CompareValue); + + /* Write to TIMx CCER */ + LL_TIM_WriteReg(TIMx, CCER, tmpccer); + + return SUCCESS; +} + + +/** + * @brief Configure the TIMx input channel 1. + * @param TIMx Timer Instance + * @param TIM_ICInitStruct pointer to the the TIMx input channel 1 configuration data structure + * @retval An ErrorStatus enumeration value: + * - SUCCESS: TIMx registers are de-initialized + * - ERROR: not applicable + */ +static ErrorStatus IC1Config(TIM_TypeDef *TIMx, LL_TIM_IC_InitTypeDef *TIM_ICInitStruct) +{ + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(TIMx)); + assert_param(IS_LL_TIM_IC_POLARITY(TIM_ICInitStruct->ICPolarity)); + assert_param(IS_LL_TIM_ACTIVEINPUT(TIM_ICInitStruct->ICActiveInput)); + assert_param(IS_LL_TIM_ICPSC(TIM_ICInitStruct->ICPrescaler)); + assert_param(IS_LL_TIM_IC_FILTER(TIM_ICInitStruct->ICFilter)); + + /* Disable the Channel 1: Reset the CC1E Bit */ + TIMx->CCER &= (uint32_t)~TIM_CCER_CC1E; + + /* Select the Input and set the filter and the prescaler value */ + MODIFY_REG(TIMx->CCMR1, + (TIM_CCMR1_CC1S | TIM_CCMR1_IC1F | TIM_CCMR1_IC1PSC), + (TIM_ICInitStruct->ICActiveInput | TIM_ICInitStruct->ICFilter | TIM_ICInitStruct->ICPrescaler) >> 16U); + + /* Select the Polarity and set the CC1E Bit */ + MODIFY_REG(TIMx->CCER, + (TIM_CCER_CC1P | TIM_CCER_CC1NP), + (TIM_ICInitStruct->ICPolarity | TIM_CCER_CC1E)); + + return SUCCESS; +} + +/** + * @brief Configure the TIMx input channel 2. + * @param TIMx Timer Instance + * @param TIM_ICInitStruct pointer to the the TIMx input channel 2 configuration data structure + * @retval An ErrorStatus enumeration value: + * - SUCCESS: TIMx registers are de-initialized + * - ERROR: not applicable + */ +static ErrorStatus IC2Config(TIM_TypeDef *TIMx, LL_TIM_IC_InitTypeDef *TIM_ICInitStruct) +{ + /* Check the parameters */ + assert_param(IS_TIM_CC2_INSTANCE(TIMx)); + assert_param(IS_LL_TIM_IC_POLARITY(TIM_ICInitStruct->ICPolarity)); + assert_param(IS_LL_TIM_ACTIVEINPUT(TIM_ICInitStruct->ICActiveInput)); + assert_param(IS_LL_TIM_ICPSC(TIM_ICInitStruct->ICPrescaler)); + assert_param(IS_LL_TIM_IC_FILTER(TIM_ICInitStruct->ICFilter)); + + /* Disable the Channel 2: Reset the CC2E Bit */ + TIMx->CCER &= (uint32_t)~TIM_CCER_CC2E; + + /* Select the Input and set the filter and the prescaler value */ + MODIFY_REG(TIMx->CCMR1, + (TIM_CCMR1_CC2S | TIM_CCMR1_IC2F | TIM_CCMR1_IC2PSC), + (TIM_ICInitStruct->ICActiveInput | TIM_ICInitStruct->ICFilter | TIM_ICInitStruct->ICPrescaler) >> 8U); + + /* Select the Polarity and set the CC2E Bit */ + MODIFY_REG(TIMx->CCER, + (TIM_CCER_CC2P | TIM_CCER_CC2NP), + ((TIM_ICInitStruct->ICPolarity << 4U) | TIM_CCER_CC2E)); + + return SUCCESS; +} + +/** + * @brief Configure the TIMx input channel 3. + * @param TIMx Timer Instance + * @param TIM_ICInitStruct pointer to the the TIMx input channel 3 configuration data structure + * @retval An ErrorStatus enumeration value: + * - SUCCESS: TIMx registers are de-initialized + * - ERROR: not applicable + */ +static ErrorStatus IC3Config(TIM_TypeDef *TIMx, LL_TIM_IC_InitTypeDef *TIM_ICInitStruct) +{ + /* Check the parameters */ + assert_param(IS_TIM_CC3_INSTANCE(TIMx)); + assert_param(IS_LL_TIM_IC_POLARITY(TIM_ICInitStruct->ICPolarity)); + assert_param(IS_LL_TIM_ACTIVEINPUT(TIM_ICInitStruct->ICActiveInput)); + assert_param(IS_LL_TIM_ICPSC(TIM_ICInitStruct->ICPrescaler)); + assert_param(IS_LL_TIM_IC_FILTER(TIM_ICInitStruct->ICFilter)); + + /* Disable the Channel 3: Reset the CC3E Bit */ + TIMx->CCER &= (uint32_t)~TIM_CCER_CC3E; + + /* Select the Input and set the filter and the prescaler value */ + MODIFY_REG(TIMx->CCMR2, + (TIM_CCMR2_CC3S | TIM_CCMR2_IC3F | TIM_CCMR2_IC3PSC), + (TIM_ICInitStruct->ICActiveInput | TIM_ICInitStruct->ICFilter | TIM_ICInitStruct->ICPrescaler) >> 16U); + + /* Select the Polarity and set the CC3E Bit */ + MODIFY_REG(TIMx->CCER, + (TIM_CCER_CC3P | TIM_CCER_CC3NP), + ((TIM_ICInitStruct->ICPolarity << 8U) | TIM_CCER_CC3E)); + + return SUCCESS; +} + +/** + * @brief Configure the TIMx input channel 4. + * @param TIMx Timer Instance + * @param TIM_ICInitStruct pointer to the the TIMx input channel 4 configuration data structure + * @retval An ErrorStatus enumeration value: + * - SUCCESS: TIMx registers are de-initialized + * - ERROR: not applicable + */ +static ErrorStatus IC4Config(TIM_TypeDef *TIMx, LL_TIM_IC_InitTypeDef *TIM_ICInitStruct) +{ + /* Check the parameters */ + assert_param(IS_TIM_CC4_INSTANCE(TIMx)); + assert_param(IS_LL_TIM_IC_POLARITY(TIM_ICInitStruct->ICPolarity)); + assert_param(IS_LL_TIM_ACTIVEINPUT(TIM_ICInitStruct->ICActiveInput)); + assert_param(IS_LL_TIM_ICPSC(TIM_ICInitStruct->ICPrescaler)); + assert_param(IS_LL_TIM_IC_FILTER(TIM_ICInitStruct->ICFilter)); + + /* Disable the Channel 4: Reset the CC4E Bit */ + TIMx->CCER &= (uint32_t)~TIM_CCER_CC4E; + + /* Select the Input and set the filter and the prescaler value */ + MODIFY_REG(TIMx->CCMR2, + (TIM_CCMR2_CC4S | TIM_CCMR2_IC4F | TIM_CCMR2_IC4PSC), + (TIM_ICInitStruct->ICActiveInput | TIM_ICInitStruct->ICFilter | TIM_ICInitStruct->ICPrescaler) >> 8U); + + /* Select the Polarity and set the CC2E Bit */ + MODIFY_REG(TIMx->CCER, + (TIM_CCER_CC4P | TIM_CCER_CC4NP), + ((TIM_ICInitStruct->ICPolarity << 12U) | TIM_CCER_CC4E)); + + return SUCCESS; +} + + +/** + * @} + */ + +/** + * @} + */ + +#endif /* TIM2 || TIM3 || TIM4 || TIM5 || TIM9 || TIM10 || TIM11 TIM6 || TIM7 */ + +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_ll_usart.c b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_ll_usart.c new file mode 100755 index 0000000..e896508 --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_ll_usart.c @@ -0,0 +1,429 @@ +/** + ****************************************************************************** + * @file stm32l1xx_ll_usart.c + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief USART LL module driver. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ +#if defined(USE_FULL_LL_DRIVER) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_ll_usart.h" +#include "stm32l1xx_ll_rcc.h" +#include "stm32l1xx_ll_bus.h" +#ifdef USE_FULL_ASSERT +#include "stm32_assert.h" +#else +#define assert_param(expr) ((void)0U) +#endif + +/** @addtogroup STM32L1xx_LL_Driver + * @{ + */ + +#if defined (USART1) || defined (USART2) || defined (USART3) || defined (UART4) || defined (UART5) + +/** @addtogroup USART_LL + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @addtogroup USART_LL_Private_Constants + * @{ + */ + +/** + * @} + */ + + +/* Private macros ------------------------------------------------------------*/ +/** @addtogroup USART_LL_Private_Macros + * @{ + */ + +/* __BAUDRATE__ The maximum Baud Rate is derived from the maximum clock available + * divided by the smallest oversampling used on the USART (i.e. 8) */ +#define IS_LL_USART_BAUDRATE(__BAUDRATE__) ((__BAUDRATE__) <= 10000000U) + +#define IS_LL_USART_DIRECTION(__VALUE__) (((__VALUE__) == LL_USART_DIRECTION_NONE) \ + || ((__VALUE__) == LL_USART_DIRECTION_RX) \ + || ((__VALUE__) == LL_USART_DIRECTION_TX) \ + || ((__VALUE__) == LL_USART_DIRECTION_TX_RX)) + +#define IS_LL_USART_PARITY(__VALUE__) (((__VALUE__) == LL_USART_PARITY_NONE) \ + || ((__VALUE__) == LL_USART_PARITY_EVEN) \ + || ((__VALUE__) == LL_USART_PARITY_ODD)) + +#define IS_LL_USART_DATAWIDTH(__VALUE__) (((__VALUE__) == LL_USART_DATAWIDTH_8B) \ + || ((__VALUE__) == LL_USART_DATAWIDTH_9B)) + +#define IS_LL_USART_OVERSAMPLING(__VALUE__) (((__VALUE__) == LL_USART_OVERSAMPLING_16) \ + || ((__VALUE__) == LL_USART_OVERSAMPLING_8)) + +#define IS_LL_USART_LASTBITCLKOUTPUT(__VALUE__) (((__VALUE__) == LL_USART_LASTCLKPULSE_NO_OUTPUT) \ + || ((__VALUE__) == LL_USART_LASTCLKPULSE_OUTPUT)) + +#define IS_LL_USART_CLOCKPHASE(__VALUE__) (((__VALUE__) == LL_USART_PHASE_1EDGE) \ + || ((__VALUE__) == LL_USART_PHASE_2EDGE)) + +#define IS_LL_USART_CLOCKPOLARITY(__VALUE__) (((__VALUE__) == LL_USART_POLARITY_LOW) \ + || ((__VALUE__) == LL_USART_POLARITY_HIGH)) + +#define IS_LL_USART_CLOCKOUTPUT(__VALUE__) (((__VALUE__) == LL_USART_CLOCK_DISABLE) \ + || ((__VALUE__) == LL_USART_CLOCK_ENABLE)) + +#define IS_LL_USART_STOPBITS(__VALUE__) (((__VALUE__) == LL_USART_STOPBITS_0_5) \ + || ((__VALUE__) == LL_USART_STOPBITS_1) \ + || ((__VALUE__) == LL_USART_STOPBITS_1_5) \ + || ((__VALUE__) == LL_USART_STOPBITS_2)) + +#define IS_LL_USART_HWCONTROL(__VALUE__) (((__VALUE__) == LL_USART_HWCONTROL_NONE) \ + || ((__VALUE__) == LL_USART_HWCONTROL_RTS) \ + || ((__VALUE__) == LL_USART_HWCONTROL_CTS) \ + || ((__VALUE__) == LL_USART_HWCONTROL_RTS_CTS)) + +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup USART_LL_Exported_Functions + * @{ + */ + +/** @addtogroup USART_LL_EF_Init + * @{ + */ + +/** + * @brief De-initialize USART registers (Registers restored to their default values). + * @param USARTx USART Instance + * @retval An ErrorStatus enumeration value: + * - SUCCESS: USART registers are de-initialized + * - ERROR: USART registers are not de-initialized + */ +ErrorStatus LL_USART_DeInit(USART_TypeDef *USARTx) +{ + ErrorStatus status = SUCCESS; + + /* Check the parameters */ + assert_param(IS_UART_INSTANCE(USARTx)); + + if (USARTx == USART1) + { + /* Force reset of USART clock */ + LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_USART1); + + /* Release reset of USART clock */ + LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_USART1); + } + else if (USARTx == USART2) + { + /* Force reset of USART clock */ + LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_USART2); + + /* Release reset of USART clock */ + LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_USART2); + } + else if (USARTx == USART3) + { + /* Force reset of USART clock */ + LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_USART3); + + /* Release reset of USART clock */ + LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_USART3); + } +#if defined(UART4) + else if (USARTx == UART4) + { + /* Force reset of UART clock */ + LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_UART4); + + /* Release reset of UART clock */ + LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_UART4); + } +#endif /* UART4 */ +#if defined(UART5) + else if (USARTx == UART5) + { + /* Force reset of UART clock */ + LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_UART5); + + /* Release reset of UART clock */ + LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_UART5); + } +#endif /* UART5 */ + else + { + status = ERROR; + } + + return (status); +} + +/** + * @brief Initialize USART registers according to the specified + * parameters in USART_InitStruct. + * @note As some bits in USART configuration registers can only be written when the USART is disabled (USART_CR1_UE bit =0), + * USART IP should be in disabled state prior calling this function. Otherwise, ERROR result will be returned. + * @note Baud rate value stored in USART_InitStruct BaudRate field, should be valid (different from 0). + * @param USARTx USART Instance + * @param USART_InitStruct: pointer to a LL_USART_InitTypeDef structure + * that contains the configuration information for the specified USART peripheral. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: USART registers are initialized according to USART_InitStruct content + * - ERROR: Problem occurred during USART Registers initialization + */ +ErrorStatus LL_USART_Init(USART_TypeDef *USARTx, LL_USART_InitTypeDef *USART_InitStruct) +{ + ErrorStatus status = ERROR; + uint32_t periphclk = LL_RCC_PERIPH_FREQUENCY_NO; + LL_RCC_ClocksTypeDef rcc_clocks; + + /* Check the parameters */ + assert_param(IS_UART_INSTANCE(USARTx)); + assert_param(IS_LL_USART_BAUDRATE(USART_InitStruct->BaudRate)); + assert_param(IS_LL_USART_DATAWIDTH(USART_InitStruct->DataWidth)); + assert_param(IS_LL_USART_STOPBITS(USART_InitStruct->StopBits)); + assert_param(IS_LL_USART_PARITY(USART_InitStruct->Parity)); + assert_param(IS_LL_USART_DIRECTION(USART_InitStruct->TransferDirection)); + assert_param(IS_LL_USART_HWCONTROL(USART_InitStruct->HardwareFlowControl)); + assert_param(IS_LL_USART_OVERSAMPLING(USART_InitStruct->OverSampling)); + + /* USART needs to be in disabled state, in order to be able to configure some bits in + CRx registers */ + if (LL_USART_IsEnabled(USARTx) == 0U) + { + /*---------------------------- USART CR1 Configuration ----------------------- + * Configure USARTx CR1 (USART Word Length, Parity, Mode and Oversampling bits) with parameters: + * - DataWidth: USART_CR1_M bits according to USART_InitStruct->DataWidth value + * - Parity: USART_CR1_PCE, USART_CR1_PS bits according to USART_InitStruct->Parity value + * - TransferDirection: USART_CR1_TE, USART_CR1_RE bits according to USART_InitStruct->TransferDirection value + * - Oversampling: USART_CR1_OVER8 bit according to USART_InitStruct->OverSampling value. + */ + MODIFY_REG(USARTx->CR1, + (USART_CR1_M | USART_CR1_PCE | USART_CR1_PS | + USART_CR1_TE | USART_CR1_RE | USART_CR1_OVER8), + (USART_InitStruct->DataWidth | USART_InitStruct->Parity | + USART_InitStruct->TransferDirection | USART_InitStruct->OverSampling)); + + /*---------------------------- USART CR2 Configuration ----------------------- + * Configure USARTx CR2 (Stop bits) with parameters: + * - Stop Bits: USART_CR2_STOP bits according to USART_InitStruct->StopBits value. + * - CLKEN, CPOL, CPHA and LBCL bits are to be configured using LL_USART_ClockInit(). + */ + LL_USART_SetStopBitsLength(USARTx, USART_InitStruct->StopBits); + + /*---------------------------- USART CR3 Configuration ----------------------- + * Configure USARTx CR3 (Hardware Flow Control) with parameters: + * - HardwareFlowControl: USART_CR3_RTSE, USART_CR3_CTSE bits according to USART_InitStruct->HardwareFlowControl value. + */ + LL_USART_SetHWFlowCtrl(USARTx, USART_InitStruct->HardwareFlowControl); + + /*---------------------------- USART BRR Configuration ----------------------- + * Retrieve Clock frequency used for USART Peripheral + */ + LL_RCC_GetSystemClocksFreq(&rcc_clocks); + if (USARTx == USART1) + { + periphclk = rcc_clocks.PCLK2_Frequency; + } + else if (USARTx == USART2) + { + periphclk = rcc_clocks.PCLK1_Frequency; + } + else if (USARTx == USART3) + { + periphclk = rcc_clocks.PCLK1_Frequency; + } +#if defined(UART4) + else if (USARTx == UART4) + { + periphclk = rcc_clocks.PCLK1_Frequency; + } +#endif /* UART4 */ +#if defined(UART5) + else if (USARTx == UART5) + { + periphclk = rcc_clocks.PCLK1_Frequency; + } +#endif /* UART5 */ + else + { + /* Nothing to do, as error code is already assigned to ERROR value */ + } + + /* Configure the USART Baud Rate : + - valid baud rate value (different from 0) is required + - Peripheral clock as returned by RCC service, should be valid (different from 0). + */ + if ((periphclk != LL_RCC_PERIPH_FREQUENCY_NO) + && (USART_InitStruct->BaudRate != 0U)) + { + status = SUCCESS; + LL_USART_SetBaudRate(USARTx, + periphclk, + USART_InitStruct->OverSampling, + USART_InitStruct->BaudRate); + } + } + /* Endif (=> USART not in Disabled state => return ERROR) */ + + return (status); +} + +/** + * @brief Set each @ref LL_USART_InitTypeDef field to default value. + * @param USART_InitStruct: pointer to a @ref LL_USART_InitTypeDef structure + * whose fields will be set to default values. + * @retval None + */ + +void LL_USART_StructInit(LL_USART_InitTypeDef *USART_InitStruct) +{ + /* Set USART_InitStruct fields to default values */ + USART_InitStruct->BaudRate = 9600U; + USART_InitStruct->DataWidth = LL_USART_DATAWIDTH_8B; + USART_InitStruct->StopBits = LL_USART_STOPBITS_1; + USART_InitStruct->Parity = LL_USART_PARITY_NONE ; + USART_InitStruct->TransferDirection = LL_USART_DIRECTION_TX_RX; + USART_InitStruct->HardwareFlowControl = LL_USART_HWCONTROL_NONE; + USART_InitStruct->OverSampling = LL_USART_OVERSAMPLING_16; +} + +/** + * @brief Initialize USART Clock related settings according to the + * specified parameters in the USART_ClockInitStruct. + * @note As some bits in USART configuration registers can only be written when the USART is disabled (USART_CR1_UE bit =0), + * USART IP should be in disabled state prior calling this function. Otherwise, ERROR result will be returned. + * @param USARTx USART Instance + * @param USART_ClockInitStruct: pointer to a @ref LL_USART_ClockInitTypeDef structure + * that contains the Clock configuration information for the specified USART peripheral. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: USART registers related to Clock settings are initialized according to USART_ClockInitStruct content + * - ERROR: Problem occurred during USART Registers initialization + */ +ErrorStatus LL_USART_ClockInit(USART_TypeDef *USARTx, LL_USART_ClockInitTypeDef *USART_ClockInitStruct) +{ + ErrorStatus status = SUCCESS; + + /* Check USART Instance and Clock signal output parameters */ + assert_param(IS_UART_INSTANCE(USARTx)); + assert_param(IS_LL_USART_CLOCKOUTPUT(USART_ClockInitStruct->ClockOutput)); + + /* USART needs to be in disabled state, in order to be able to configure some bits in + CRx registers */ + if (LL_USART_IsEnabled(USARTx) == 0U) + { + /*---------------------------- USART CR2 Configuration -----------------------*/ + /* If Clock signal has to be output */ + if (USART_ClockInitStruct->ClockOutput == LL_USART_CLOCK_DISABLE) + { + /* Deactivate Clock signal delivery : + * - Disable Clock Output: USART_CR2_CLKEN cleared + */ + LL_USART_DisableSCLKOutput(USARTx); + } + else + { + /* Ensure USART instance is USART capable */ + assert_param(IS_USART_INSTANCE(USARTx)); + + /* Check clock related parameters */ + assert_param(IS_LL_USART_CLOCKPOLARITY(USART_ClockInitStruct->ClockPolarity)); + assert_param(IS_LL_USART_CLOCKPHASE(USART_ClockInitStruct->ClockPhase)); + assert_param(IS_LL_USART_LASTBITCLKOUTPUT(USART_ClockInitStruct->LastBitClockPulse)); + + /*---------------------------- USART CR2 Configuration ----------------------- + * Configure USARTx CR2 (Clock signal related bits) with parameters: + * - Enable Clock Output: USART_CR2_CLKEN set + * - Clock Polarity: USART_CR2_CPOL bit according to USART_ClockInitStruct->ClockPolarity value + * - Clock Phase: USART_CR2_CPHA bit according to USART_ClockInitStruct->ClockPhase value + * - Last Bit Clock Pulse Output: USART_CR2_LBCL bit according to USART_ClockInitStruct->LastBitClockPulse value. + */ + MODIFY_REG(USARTx->CR2, + USART_CR2_CLKEN | USART_CR2_CPHA | USART_CR2_CPOL | USART_CR2_LBCL, + USART_CR2_CLKEN | USART_ClockInitStruct->ClockPolarity | + USART_ClockInitStruct->ClockPhase | USART_ClockInitStruct->LastBitClockPulse); + } + } + /* Else (USART not in Disabled state => return ERROR */ + else + { + status = ERROR; + } + + return (status); +} + +/** + * @brief Set each field of a @ref LL_USART_ClockInitTypeDef type structure to default value. + * @param USART_ClockInitStruct: pointer to a @ref LL_USART_ClockInitTypeDef structure + * whose fields will be set to default values. + * @retval None + */ +void LL_USART_ClockStructInit(LL_USART_ClockInitTypeDef *USART_ClockInitStruct) +{ + /* Set LL_USART_ClockInitStruct fields with default values */ + USART_ClockInitStruct->ClockOutput = LL_USART_CLOCK_DISABLE; + USART_ClockInitStruct->ClockPolarity = LL_USART_POLARITY_LOW; /* Not relevant when ClockOutput = LL_USART_CLOCK_DISABLE */ + USART_ClockInitStruct->ClockPhase = LL_USART_PHASE_1EDGE; /* Not relevant when ClockOutput = LL_USART_CLOCK_DISABLE */ + USART_ClockInitStruct->LastBitClockPulse = LL_USART_LASTCLKPULSE_NO_OUTPUT; /* Not relevant when ClockOutput = LL_USART_CLOCK_DISABLE */ +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* USART1 || USART2|| USART3 || UART4 || UART5 */ + +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_ll_utils.c b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_ll_utils.c new file mode 100755 index 0000000..664e64b --- /dev/null +++ b/src/boards/mcu/stm32/STM32L1xx_HAL_Driver/Src/stm32l1xx_ll_utils.c @@ -0,0 +1,594 @@ +/** + ****************************************************************************** + * @file stm32l1xx_ll_utils.c + * @author MCD Application Team + * @version V1.2.0 + * @date 01-July-2016 + * @brief UTILS LL module driver. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_ll_rcc.h" +#include "stm32l1xx_ll_utils.h" +#include "stm32l1xx_ll_system.h" +#include "stm32l1xx_ll_pwr.h" +#ifdef USE_FULL_ASSERT +#include "stm32_assert.h" +#else +#define assert_param(expr) ((void)0U) +#endif + +/** @addtogroup STM32L1xx_LL_Driver + * @{ + */ + +/** @addtogroup UTILS_LL + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @addtogroup UTILS_LL_Private_Constants + * @{ + */ +#define UTILS_MAX_FREQUENCY_SCALE1 ((uint32_t)32000000U) /*!< Maximum frequency for system clock at power scale1, in Hz */ +#define UTILS_MAX_FREQUENCY_SCALE2 ((uint32_t)16000000U) /*!< Maximum frequency for system clock at power scale2, in Hz */ +#define UTILS_MAX_FREQUENCY_SCALE3 ((uint32_t)4000000U) /*!< Maximum frequency for system clock at power scale3, in Hz */ + +/* Defines used for PLL range */ +#define UTILS_PLLVCO_OUTPUT_SCALE1 ((uint32_t)96000000U) /*!< Frequency max for PLLVCO output at power scale1, in Hz */ +#define UTILS_PLLVCO_OUTPUT_SCALE2 ((uint32_t)48000000U) /*!< Frequency max for PLLVCO output at power scale2, in Hz */ +#define UTILS_PLLVCO_OUTPUT_SCALE3 ((uint32_t)24000000U) /*!< Frequency max for PLLVCO output at power scale3, in Hz */ + +/* Defines used for HSE range */ +#define UTILS_HSE_FREQUENCY_MIN ((uint32_t)1000000U) /*!< Frequency min for HSE frequency, in Hz */ +#define UTILS_HSE_FREQUENCY_MAX ((uint32_t)24000000U) /*!< Frequency max for HSE frequency, in Hz */ + +/* Defines used for FLASH latency according to HCLK Frequency */ +#define UTILS_SCALE1_LATENCY1_FREQ ((uint32_t)16000000U) /*!< HCLK frequency to set FLASH latency 1 in power scale 1 */ +#define UTILS_SCALE2_LATENCY1_FREQ ((uint32_t)8000000U) /*!< HCLK frequency to set FLASH latency 1 in power scale 2 */ +#define UTILS_SCALE3_LATENCY1_FREQ ((uint32_t)2000000U) /*!< HCLK frequency to set FLASH latency 1 in power scale 3 */ +/** + * @} + */ +/* Private macros ------------------------------------------------------------*/ +/** @addtogroup UTILS_LL_Private_Macros + * @{ + */ +#define IS_LL_UTILS_SYSCLK_DIV(__VALUE__) (((__VALUE__) == LL_RCC_SYSCLK_DIV_1) \ + || ((__VALUE__) == LL_RCC_SYSCLK_DIV_2) \ + || ((__VALUE__) == LL_RCC_SYSCLK_DIV_4) \ + || ((__VALUE__) == LL_RCC_SYSCLK_DIV_8) \ + || ((__VALUE__) == LL_RCC_SYSCLK_DIV_16) \ + || ((__VALUE__) == LL_RCC_SYSCLK_DIV_64) \ + || ((__VALUE__) == LL_RCC_SYSCLK_DIV_128) \ + || ((__VALUE__) == LL_RCC_SYSCLK_DIV_256) \ + || ((__VALUE__) == LL_RCC_SYSCLK_DIV_512)) + +#define IS_LL_UTILS_APB1_DIV(__VALUE__) (((__VALUE__) == LL_RCC_APB1_DIV_1) \ + || ((__VALUE__) == LL_RCC_APB1_DIV_2) \ + || ((__VALUE__) == LL_RCC_APB1_DIV_4) \ + || ((__VALUE__) == LL_RCC_APB1_DIV_8) \ + || ((__VALUE__) == LL_RCC_APB1_DIV_16)) + +#define IS_LL_UTILS_APB2_DIV(__VALUE__) (((__VALUE__) == LL_RCC_APB2_DIV_1) \ + || ((__VALUE__) == LL_RCC_APB2_DIV_2) \ + || ((__VALUE__) == LL_RCC_APB2_DIV_4) \ + || ((__VALUE__) == LL_RCC_APB2_DIV_8) \ + || ((__VALUE__) == LL_RCC_APB2_DIV_16)) + +#define IS_LL_UTILS_PLLMUL_VALUE(__VALUE__) (((__VALUE__) == LL_RCC_PLL_MUL_3) \ + || ((__VALUE__) == LL_RCC_PLL_MUL_4) \ + || ((__VALUE__) == LL_RCC_PLL_MUL_6) \ + || ((__VALUE__) == LL_RCC_PLL_MUL_8) \ + || ((__VALUE__) == LL_RCC_PLL_MUL_12) \ + || ((__VALUE__) == LL_RCC_PLL_MUL_16) \ + || ((__VALUE__) == LL_RCC_PLL_MUL_24) \ + || ((__VALUE__) == LL_RCC_PLL_MUL_32) \ + || ((__VALUE__) == LL_RCC_PLL_MUL_48)) + +#define IS_LL_UTILS_PLLDIV_VALUE(__VALUE__) (((__VALUE__) == LL_RCC_PLL_DIV_2) || ((__VALUE__) == LL_RCC_PLL_DIV_3) || \ + ((__VALUE__) == LL_RCC_PLL_DIV_4)) + +#define IS_LL_UTILS_PLLVCO_OUTPUT(__VALUE__) ((LL_PWR_GetRegulVoltageScaling() == LL_PWR_REGU_VOLTAGE_SCALE1) ? ((__VALUE__) <= UTILS_PLLVCO_OUTPUT_SCALE1) : \ + ((LL_PWR_GetRegulVoltageScaling() == LL_PWR_REGU_VOLTAGE_SCALE2) ? ((__VALUE__) <= UTILS_PLLVCO_OUTPUT_SCALE2) : \ + ((__VALUE__) <= UTILS_PLLVCO_OUTPUT_SCALE3))) + +#define IS_LL_UTILS_PLL_FREQUENCY(__VALUE__) ((LL_PWR_GetRegulVoltageScaling() == LL_PWR_REGU_VOLTAGE_SCALE1) ? ((__VALUE__) <= UTILS_MAX_FREQUENCY_SCALE1) : \ + ((LL_PWR_GetRegulVoltageScaling() == LL_PWR_REGU_VOLTAGE_SCALE2) ? ((__VALUE__) <= UTILS_MAX_FREQUENCY_SCALE2) : \ + ((__VALUE__) <= UTILS_MAX_FREQUENCY_SCALE3))) + +#define IS_LL_UTILS_HSE_BYPASS(__STATE__) (((__STATE__) == LL_UTILS_HSEBYPASS_ON) \ + || ((__STATE__) == LL_UTILS_HSEBYPASS_OFF)) + +#define IS_LL_UTILS_HSE_FREQUENCY(__FREQUENCY__) (((__FREQUENCY__) >= UTILS_HSE_FREQUENCY_MIN) && ((__FREQUENCY__) <= UTILS_HSE_FREQUENCY_MAX)) +/** + * @} + */ +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup UTILS_LL_Private_Functions UTILS Private functions + * @{ + */ +static uint32_t UTILS_GetPLLOutputFrequency(uint32_t PLL_InputFrequency, + LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct); +static ErrorStatus UTILS_SetFlashLatency(uint32_t Frequency); +static ErrorStatus UTILS_EnablePLLAndSwitchSystem(uint32_t SYSCLK_Frequency, LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct); +static ErrorStatus UTILS_PLL_IsBusy(void); +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup UTILS_LL_Exported_Functions + * @{ + */ + +/** @addtogroup UTILS_LL_EF_DELAY + * @{ + */ + +/** + * @brief This function configures the Cortex-M SysTick source to have 1ms time base. + * @note When a RTOS is used, it is recommended to avoid changing the Systick + * configuration by calling this function, for a delay use rather osDelay RTOS service. + * @param HCLKFrequency HCLK frequency in Hz + * @note HCLK frequency can be calculated thanks to RCC helper macro or function @ref LL_RCC_GetSystemClocksFreq + * @retval None + */ +void LL_Init1msTick(uint32_t HCLKFrequency) +{ + /* Use frequency provided in argument */ + LL_InitTick(HCLKFrequency, 1000U); +} + +/** + * @brief This function provides accurate delay (in milliseconds) based + * on SysTick counter flag + * @note When a RTOS is used, it is recommended to avoid using blocking delay + * and use rather osDelay service. + * @note To respect 1ms timebase, user should call @ref LL_Init1msTick function which + * will configure Systick to 1ms + * @param Delay specifies the delay time length, in milliseconds. + * @retval None + */ +void LL_mDelay(uint32_t Delay) +{ + __IO uint32_t tmp = SysTick->CTRL; /* Clear the COUNTFLAG first */ + /* Add this code to indicate that local variable is not used */ + ((void)tmp); + + /* Add a period to guaranty minimum wait */ + if (Delay < LL_MAX_DELAY) + { + Delay++; + } + + while (Delay) + { + if ((SysTick->CTRL & SysTick_CTRL_COUNTFLAG_Msk) != 0U) + { + Delay--; + } + } +} + +/** + * @} + */ + +/** @addtogroup UTILS_EF_SYSTEM + * @brief System Configuration functions + * + @verbatim + =============================================================================== + ##### System Configuration functions ##### + =============================================================================== + [..] + System, AHB and APB buses clocks configuration + + (+) The maximum frequency of the SYSCLK, HCLK, PCLK1 and PCLK2 is 32000000 Hz. + @endverbatim + @internal + Depending on the device voltage range, the maximum frequency should be + adapted accordingly: + (++) +----------------------------------------------------------------+ + (++) | Wait states | HCLK clock frequency (MHz) | + (++) | |------------------------------------------------| + (++) | (Latency) | voltage range | voltage range | + (++) | | 1.65 V - 3.6 V | 2.0 V - 3.6 V | + (++) | |----------------|---------------|---------------| + (++) | | VCORE = 1.2 V | VCORE = 1.5 V | VCORE = 1.8 V | + (++) |-------------- |----------------|---------------|---------------| + (++) |0WS(1CPU cycle)|0 < HCLK <= 2 |0 < HCLK <= 8 |0 < HCLK <= 16 | + (++) |---------------|----------------|---------------|---------------| + (++) |1WS(2CPU cycle)|2 < HCLK <= 4 |8 < HCLK <= 16 |16 < HCLK <= 32| + (++) +----------------------------------------------------------------+ + @endinternal + * @{ + */ + +/** + * @brief This function sets directly SystemCoreClock CMSIS variable. + * @note Variable can be calculated also through SystemCoreClockUpdate function. + * @param HCLKFrequency HCLK frequency in Hz (can be calculated thanks to RCC helper macro) + * @retval None + */ +void LL_SetSystemCoreClock(uint32_t HCLKFrequency) +{ + /* HCLK clock frequency */ + SystemCoreClock = HCLKFrequency; +} + +/** + * @brief This function configures system clock with HSI as clock source of the PLL + * @note The application need to ensure that PLL is disabled. + * @note Function is based on the following formula: + * - PLL output frequency = ((HSI frequency * PLLMul) / PLLDiv) + * - PLLMul: The application software must set correctly the PLL multiplication factor to avoid exceeding + * - 96 MHz as PLLVCO when the product is in range 1, + * - 48 MHz as PLLVCO when the product is in range 2, + * - 24 MHz when the product is in range 3 + * @note FLASH latency can be modified through this function. + * @note If this latency increases to 1WS, FLASH 64-bit access will be automatically enabled. + * A decrease of FLASH latency to 0WS will not disable 64-bit access. If needed, user should call + * the following function @ref LL_FLASH_Disable64bitAccess. + * @param UTILS_PLLInitStruct pointer to a @ref LL_UTILS_PLLInitTypeDef structure that contains + * the configuration information for the PLL. + * @param UTILS_ClkInitStruct pointer to a @ref LL_UTILS_ClkInitTypeDef structure that contains + * the configuration information for the BUS prescalers. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: Max frequency configuration done + * - ERROR: Max frequency configuration not done + */ +ErrorStatus LL_PLL_ConfigSystemClock_HSI(LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct, + LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct) +{ + ErrorStatus status = SUCCESS; + uint32_t pllfreq = 0U; + + /* Check if one of the PLL is enabled */ + if (UTILS_PLL_IsBusy() == SUCCESS) + { + /* Calculate the new PLL output frequency */ + pllfreq = UTILS_GetPLLOutputFrequency(HSI_VALUE, UTILS_PLLInitStruct); + + /* Enable HSI if not enabled */ + if (LL_RCC_HSI_IsReady() != 1U) + { + LL_RCC_HSI_Enable(); + while (LL_RCC_HSI_IsReady() != 1U) + { + /* Wait for HSI ready */ + } + } + + /* Configure PLL */ + LL_RCC_PLL_ConfigDomain_SYS(LL_RCC_PLLSOURCE_HSI, UTILS_PLLInitStruct->PLLMul, UTILS_PLLInitStruct->PLLDiv); + + /* Enable PLL and switch system clock to PLL */ + status = UTILS_EnablePLLAndSwitchSystem(pllfreq, UTILS_ClkInitStruct); + } + else + { + /* Current PLL configuration cannot be modified */ + status = ERROR; + } + + return status; +} + +/** + * @brief This function configures system clock with HSE as clock source of the PLL + * @note The application need to ensure that PLL is disabled. + * @note Function is based on the following formula: + * - PLL output frequency = ((HSE frequency * PLLMul) / PLLDiv) + * - PLLMul: The application software must set correctly the PLL multiplication factor to avoid exceeding + * - 96 MHz as PLLVCO when the product is in range 1, + * - 48 MHz as PLLVCO when the product is in range 2, + * - 24 MHz when the product is in range 3 + * @note FLASH latency can be modified through this function. + * @note If this latency increases to 1WS, FLASH 64-bit access will be automatically enabled. + * A decrease of FLASH latency to 0WS will not disable 64-bit access. If needed, user should call + * the following function @ref LL_FLASH_Disable64bitAccess. + * @param HSEFrequency Value between Min_Data = 1000000 and Max_Data = 24000000 + * @param HSEBypass This parameter can be one of the following values: + * @arg @ref LL_UTILS_HSEBYPASS_ON + * @arg @ref LL_UTILS_HSEBYPASS_OFF + * @param UTILS_PLLInitStruct pointer to a @ref LL_UTILS_PLLInitTypeDef structure that contains + * the configuration information for the PLL. + * @param UTILS_ClkInitStruct pointer to a @ref LL_UTILS_ClkInitTypeDef structure that contains + * the configuration information for the BUS prescalers. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: Max frequency configuration done + * - ERROR: Max frequency configuration not done + */ +ErrorStatus LL_PLL_ConfigSystemClock_HSE(uint32_t HSEFrequency, uint32_t HSEBypass, + LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct, LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct) +{ + ErrorStatus status = SUCCESS; + uint32_t pllfreq = 0U; + + /* Check the parameters */ + assert_param(IS_LL_UTILS_HSE_FREQUENCY(HSEFrequency)); + assert_param(IS_LL_UTILS_HSE_BYPASS(HSEBypass)); + + /* Check if one of the PLL is enabled */ + if (UTILS_PLL_IsBusy() == SUCCESS) + { + /* Calculate the new PLL output frequency */ + pllfreq = UTILS_GetPLLOutputFrequency(HSEFrequency, UTILS_PLLInitStruct); + + /* Enable HSE if not enabled */ + if (LL_RCC_HSE_IsReady() != 1U) + { + /* Check if need to enable HSE bypass feature or not */ + if (HSEBypass == LL_UTILS_HSEBYPASS_ON) + { + LL_RCC_HSE_EnableBypass(); + } + else + { + LL_RCC_HSE_DisableBypass(); + } + + /* Enable HSE */ + LL_RCC_HSE_Enable(); + while (LL_RCC_HSE_IsReady() != 1U) + { + /* Wait for HSE ready */ + } + } + + /* Configure PLL */ + LL_RCC_PLL_ConfigDomain_SYS(LL_RCC_PLLSOURCE_HSE, UTILS_PLLInitStruct->PLLMul, UTILS_PLLInitStruct->PLLDiv); + + /* Enable PLL and switch system clock to PLL */ + status = UTILS_EnablePLLAndSwitchSystem(pllfreq, UTILS_ClkInitStruct); + } + else + { + /* Current PLL configuration cannot be modified */ + status = ERROR; + } + + return status; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup UTILS_LL_Private_Functions + * @{ + */ +/** + * @brief Update number of Flash wait states in line with new frequency and current + voltage range. + * @param Frequency HCLK frequency + * @retval An ErrorStatus enumeration value: + * - SUCCESS: Latency has been modified + * - ERROR: Latency cannot be modified + */ +static ErrorStatus UTILS_SetFlashLatency(uint32_t Frequency) +{ + ErrorStatus status = SUCCESS; + + uint32_t latency = LL_FLASH_LATENCY_0; /* default value 0WS */ + + /* Frequency cannot be equal to 0 */ + if (Frequency == 0U) + { + status = ERROR; + } + else + { + if (LL_PWR_GetRegulVoltageScaling() == LL_PWR_REGU_VOLTAGE_SCALE1) + { + if (Frequency > UTILS_SCALE1_LATENCY1_FREQ) + { + /* 16 < HCLK <= 32 => 1WS (2 CPU cycles) */ + latency = LL_FLASH_LATENCY_1; + } + /* else HCLK < 16MHz default LL_FLASH_LATENCY_0 0WS */ + } + else if (LL_PWR_GetRegulVoltageScaling() == LL_PWR_REGU_VOLTAGE_SCALE2) + { + if (Frequency > UTILS_SCALE2_LATENCY1_FREQ) + { + /* 8 < HCLK <= 16 => 1WS (2 CPU cycles) */ + latency = LL_FLASH_LATENCY_1; + } + /* else HCLK < 8MHz default LL_FLASH_LATENCY_0 0WS */ + } + else + { + if (Frequency > UTILS_SCALE3_LATENCY1_FREQ) + { + /* 2 < HCLK <= 4 => 1WS (2 CPU cycles) */ + latency = LL_FLASH_LATENCY_1; + } + /* else HCLK < 4MHz default LL_FLASH_LATENCY_0 0WS */ + } + + /* Latency cannot be set to 1WS only if 64-bit access bit is enabled */ + if (latency == LL_FLASH_LATENCY_1) + { + LL_FLASH_Enable64bitAccess(); + } + + LL_FLASH_SetLatency(latency); + + /* Check that the new number of wait states is taken into account to access the Flash + memory by reading the FLASH_ACR register */ + if (LL_FLASH_GetLatency() != latency) + { + status = ERROR; + } + } + return status; +} + +/** + * @brief Function to check that PLL can be modified + * @param PLL_InputFrequency PLL input frequency (in Hz) + * @param UTILS_PLLInitStruct pointer to a @ref LL_UTILS_PLLInitTypeDef structure that contains + * the configuration information for the PLL. + * @retval PLL output frequency (in Hz) + */ +static uint32_t UTILS_GetPLLOutputFrequency(uint32_t PLL_InputFrequency, LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct) +{ + uint32_t pllfreq = 0U; + + /* Check the parameters */ + assert_param(IS_LL_UTILS_PLLMUL_VALUE(UTILS_PLLInitStruct->PLLMul)); + assert_param(IS_LL_UTILS_PLLDIV_VALUE(UTILS_PLLInitStruct->PLLDiv)); + + /* Check different PLL parameters according to RM */ + /* The application software must set correctly the PLL multiplication factor to avoid exceeding + 96 MHz as PLLVCO when the product is in range 1, + 48 MHz as PLLVCO when the product is in range 2, + 24 MHz when the product is in range 3. */ + pllfreq = PLL_InputFrequency * (PLLMulTable[UTILS_PLLInitStruct->PLLMul >> RCC_POSITION_PLLMUL]); + assert_param(IS_LL_UTILS_PLLVCO_OUTPUT(pllfreq)); + + /* The application software must set correctly the PLL multiplication factor to avoid exceeding + maximum frequency 32000000 in range 1 */ + pllfreq = pllfreq / ((UTILS_PLLInitStruct->PLLDiv >> RCC_POSITION_PLLDIV)+1U); + assert_param(IS_LL_UTILS_PLL_FREQUENCY(pllfreq)); + + return pllfreq; +} + +/** + * @brief Function to check that PLL can be modified + * @retval An ErrorStatus enumeration value: + * - SUCCESS: PLL modification can be done + * - ERROR: PLL is busy + */ +static ErrorStatus UTILS_PLL_IsBusy(void) +{ + ErrorStatus status = SUCCESS; + + /* Check if PLL is busy*/ + if (LL_RCC_PLL_IsReady() != 0U) + { + /* PLL configuration cannot be modified */ + status = ERROR; + } + + + return status; +} + +/** + * @brief Function to enable PLL and switch system clock to PLL + * @param SYSCLK_Frequency SYSCLK frequency + * @param UTILS_ClkInitStruct pointer to a @ref LL_UTILS_ClkInitTypeDef structure that contains + * the configuration information for the BUS prescalers. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: No problem to switch system to PLL + * - ERROR: Problem to switch system to PLL + */ +static ErrorStatus UTILS_EnablePLLAndSwitchSystem(uint32_t SYSCLK_Frequency, LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct) +{ + ErrorStatus status = SUCCESS; + uint32_t hclk_frequency = 0U; + + assert_param(IS_LL_UTILS_SYSCLK_DIV(UTILS_ClkInitStruct->AHBCLKDivider)); + assert_param(IS_LL_UTILS_APB1_DIV(UTILS_ClkInitStruct->APB1CLKDivider)); + assert_param(IS_LL_UTILS_APB2_DIV(UTILS_ClkInitStruct->APB2CLKDivider)); + + /* Calculate HCLK frequency */ + hclk_frequency = __LL_RCC_CALC_HCLK_FREQ(SYSCLK_Frequency, UTILS_ClkInitStruct->AHBCLKDivider); + + /* Increasing the number of wait states because of higher CPU frequency */ + if (SystemCoreClock < hclk_frequency) + { + /* Set FLASH latency to highest latency */ + status = UTILS_SetFlashLatency(hclk_frequency); + } + + /* Update system clock configuration */ + if (status == SUCCESS) + { + /* Enable PLL */ + LL_RCC_PLL_Enable(); + while (LL_RCC_PLL_IsReady() != 1U) + { + /* Wait for PLL ready */ + } + + /* Sysclk activation on the main PLL */ + LL_RCC_SetAHBPrescaler(UTILS_ClkInitStruct->AHBCLKDivider); + LL_RCC_SetSysClkSource(LL_RCC_SYS_CLKSOURCE_PLL); + while (LL_RCC_GetSysClkSource() != LL_RCC_SYS_CLKSOURCE_STATUS_PLL) + { + /* Wait for system clock switch to PLL */ + } + + /* Set APB1 & APB2 prescaler*/ + LL_RCC_SetAPB1Prescaler(UTILS_ClkInitStruct->APB1CLKDivider); + LL_RCC_SetAPB2Prescaler(UTILS_ClkInitStruct->APB2CLKDivider); + } + + /* Decreasing the number of wait states because of lower CPU frequency */ + if (SystemCoreClock > hclk_frequency) + { + /* Set FLASH latency to lowest latency */ + status = UTILS_SetFlashLatency(hclk_frequency); + } + + /* Update SystemCoreClock variable */ + if (status == SUCCESS) + { + LL_SetSystemCoreClock(hclk_frequency); + } + + return status; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32_USB_Device_Library/Class/CDC/Inc/usbd_cdc.h b/src/boards/mcu/stm32/STM32_USB_Device_Library/Class/CDC/Inc/usbd_cdc.h new file mode 100755 index 0000000..31397d2 --- /dev/null +++ b/src/boards/mcu/stm32/STM32_USB_Device_Library/Class/CDC/Inc/usbd_cdc.h @@ -0,0 +1,179 @@ +/** + ****************************************************************************** + * @file usbd_cdc.h + * @author MCD Application Team + * @version V2.4.2 + * @date 11-December-2015 + * @brief header file for the usbd_cdc.c file. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT 2015 STMicroelectronics

+ * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __USB_CDC_H +#define __USB_CDC_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "usbd_ioreq.h" + +/** @addtogroup STM32_USB_DEVICE_LIBRARY + * @{ + */ + +/** @defgroup usbd_cdc + * @brief This file is the Header file for usbd_cdc.c + * @{ + */ + + +/** @defgroup usbd_cdc_Exported_Defines + * @{ + */ +#define CDC_IN_EP 0x81 /* EP1 for data IN */ +#define CDC_OUT_EP 0x01 /* EP1 for data OUT */ +#define CDC_CMD_EP 0x82 /* EP2 for CDC commands */ + +/* CDC Endpoints parameters: you can fine tune these values depending on the needed baudrates and performance. */ +#define CDC_DATA_HS_MAX_PACKET_SIZE 512 /* Endpoint IN & OUT Packet size */ +#define CDC_DATA_FS_MAX_PACKET_SIZE 64 /* Endpoint IN & OUT Packet size */ +#define CDC_CMD_PACKET_SIZE 8 /* Control Endpoint Packet size */ + +#define USB_CDC_CONFIG_DESC_SIZ 67 +#define CDC_DATA_HS_IN_PACKET_SIZE CDC_DATA_HS_MAX_PACKET_SIZE +#define CDC_DATA_HS_OUT_PACKET_SIZE CDC_DATA_HS_MAX_PACKET_SIZE + +#define CDC_DATA_FS_IN_PACKET_SIZE CDC_DATA_FS_MAX_PACKET_SIZE +#define CDC_DATA_FS_OUT_PACKET_SIZE CDC_DATA_FS_MAX_PACKET_SIZE + +/*---------------------------------------------------------------------*/ +/* CDC definitions */ +/*---------------------------------------------------------------------*/ +#define CDC_SEND_ENCAPSULATED_COMMAND 0x00 +#define CDC_GET_ENCAPSULATED_RESPONSE 0x01 +#define CDC_SET_COMM_FEATURE 0x02 +#define CDC_GET_COMM_FEATURE 0x03 +#define CDC_CLEAR_COMM_FEATURE 0x04 +#define CDC_SET_LINE_CODING 0x20 +#define CDC_GET_LINE_CODING 0x21 +#define CDC_SET_CONTROL_LINE_STATE 0x22 +#define CDC_SEND_BREAK 0x23 + +/** + * @} + */ + + +/** @defgroup USBD_CORE_Exported_TypesDefinitions + * @{ + */ + +/** + * @} + */ +typedef struct +{ + uint32_t bitrate; + uint8_t format; + uint8_t paritytype; + uint8_t datatype; +}USBD_CDC_LineCodingTypeDef; + +typedef struct _USBD_CDC_Itf +{ + int8_t (* Init) (void); + int8_t (* DeInit) (void); + int8_t (* Control) (uint8_t, uint8_t * , uint16_t); + int8_t (* Receive) (uint8_t *, uint32_t *); + +}USBD_CDC_ItfTypeDef; + + +typedef struct +{ + uint32_t data[CDC_DATA_HS_MAX_PACKET_SIZE/4]; /* Force 32bits alignment */ + uint8_t CmdOpCode; + uint8_t CmdLength; + uint8_t *RxBuffer; + uint8_t *TxBuffer; + uint32_t RxLength; + uint32_t TxLength; + + __IO uint32_t TxState; + __IO uint32_t RxState; +} +USBD_CDC_HandleTypeDef; + + + +/** @defgroup USBD_CORE_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup USBD_CORE_Exported_Variables + * @{ + */ + +extern USBD_ClassTypeDef USBD_CDC; +#define USBD_CDC_CLASS &USBD_CDC +/** + * @} + */ + +/** @defgroup USB_CORE_Exported_Functions + * @{ + */ +uint8_t USBD_CDC_RegisterInterface (USBD_HandleTypeDef *pdev, + USBD_CDC_ItfTypeDef *fops); + +uint8_t USBD_CDC_SetTxBuffer (USBD_HandleTypeDef *pdev, + uint8_t *pbuff, + uint16_t length); + +uint8_t USBD_CDC_SetRxBuffer (USBD_HandleTypeDef *pdev, + uint8_t *pbuff); + +uint8_t USBD_CDC_ReceivePacket (USBD_HandleTypeDef *pdev); + +uint8_t USBD_CDC_TransmitPacket (USBD_HandleTypeDef *pdev); +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __USB_CDC_H */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.c b/src/boards/mcu/stm32/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.c new file mode 100755 index 0000000..06b3fc8 --- /dev/null +++ b/src/boards/mcu/stm32/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.c @@ -0,0 +1,925 @@ +/** + ****************************************************************************** + * @file usbd_cdc.c + * @author MCD Application Team + * @version V2.4.2 + * @date 11-December-2015 + * @brief This file provides the high layer firmware functions to manage the + * following functionalities of the USB CDC Class: + * - Initialization and Configuration of high and low layer + * - Enumeration as CDC Device (and enumeration for each implemented memory interface) + * - OUT/IN data transfer + * - Command IN transfer (class requests management) + * - Error management + * + * @verbatim + * + * =================================================================== + * CDC Class Driver Description + * =================================================================== + * This driver manages the "Universal Serial Bus Class Definitions for Communications Devices + * Revision 1.2 November 16, 2007" and the sub-protocol specification of "Universal Serial Bus + * Communications Class Subclass Specification for PSTN Devices Revision 1.2 February 9, 2007" + * This driver implements the following aspects of the specification: + * - Device descriptor management + * - Configuration descriptor management + * - Enumeration as CDC device with 2 data endpoints (IN and OUT) and 1 command endpoint (IN) + * - Requests management (as described in section 6.2 in specification) + * - Abstract Control Model compliant + * - Union Functional collection (using 1 IN endpoint for control) + * - Data interface class + * + * These aspects may be enriched or modified for a specific user application. + * + * This driver doesn't implement the following aspects of the specification + * (but it is possible to manage these features with some modifications on this driver): + * - Any class-specific aspect relative to communication classes should be managed by user application. + * - All communication classes other than PSTN are not managed + * + * @endverbatim + * + ****************************************************************************** + * @attention + * + *

© COPYRIGHT 2015 STMicroelectronics

+ * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "usbd_cdc.h" +#include "usbd_desc.h" +#include "usbd_ctlreq.h" + + +/** @addtogroup STM32_USB_DEVICE_LIBRARY + * @{ + */ + + +/** @defgroup USBD_CDC + * @brief usbd core module + * @{ + */ + +/** @defgroup USBD_CDC_Private_TypesDefinitions + * @{ + */ +/** + * @} + */ + + +/** @defgroup USBD_CDC_Private_Defines + * @{ + */ +/** + * @} + */ + + +/** @defgroup USBD_CDC_Private_Macros + * @{ + */ + +/** + * @} + */ + + +/** @defgroup USBD_CDC_Private_FunctionPrototypes + * @{ + */ + + +static uint8_t USBD_CDC_Init (USBD_HandleTypeDef *pdev, + uint8_t cfgidx); + +static uint8_t USBD_CDC_DeInit (USBD_HandleTypeDef *pdev, + uint8_t cfgidx); + +static uint8_t USBD_CDC_Setup (USBD_HandleTypeDef *pdev, + USBD_SetupReqTypedef *req); + +static uint8_t USBD_CDC_DataIn (USBD_HandleTypeDef *pdev, + uint8_t epnum); + +static uint8_t USBD_CDC_DataOut (USBD_HandleTypeDef *pdev, + uint8_t epnum); + +static uint8_t USBD_CDC_EP0_RxReady (USBD_HandleTypeDef *pdev); + +static uint8_t *USBD_CDC_GetFSCfgDesc (uint16_t *length); + +static uint8_t *USBD_CDC_GetHSCfgDesc (uint16_t *length); + +static uint8_t *USBD_CDC_GetOtherSpeedCfgDesc (uint16_t *length); + +static uint8_t *USBD_CDC_GetOtherSpeedCfgDesc (uint16_t *length); + +uint8_t *USBD_CDC_GetDeviceQualifierDescriptor (uint16_t *length); + +/* USB Standard Device Descriptor */ +__ALIGN_BEGIN static uint8_t USBD_CDC_DeviceQualifierDesc[USB_LEN_DEV_QUALIFIER_DESC] __ALIGN_END = +{ + USB_LEN_DEV_QUALIFIER_DESC, + USB_DESC_TYPE_DEVICE_QUALIFIER, + 0x00, + 0x02, + 0x00, + 0x00, + 0x00, + 0x40, + 0x01, + 0x00, +}; + +/** + * @} + */ + +/** @defgroup USBD_CDC_Private_Variables + * @{ + */ + + +/* CDC interface class callbacks structure */ +USBD_ClassTypeDef USBD_CDC = +{ + USBD_CDC_Init, + USBD_CDC_DeInit, + USBD_CDC_Setup, + NULL, /* EP0_TxSent, */ + USBD_CDC_EP0_RxReady, + USBD_CDC_DataIn, + USBD_CDC_DataOut, + NULL, + NULL, + NULL, + USBD_CDC_GetHSCfgDesc, + USBD_CDC_GetFSCfgDesc, + USBD_CDC_GetOtherSpeedCfgDesc, + USBD_CDC_GetDeviceQualifierDescriptor, +}; + +/* USB CDC device Configuration Descriptor */ +__ALIGN_BEGIN uint8_t USBD_CDC_CfgHSDesc[USB_CDC_CONFIG_DESC_SIZ] __ALIGN_END = +{ + /*Configuration Descriptor*/ + 0x09, /* bLength: Configuration Descriptor size */ + USB_DESC_TYPE_CONFIGURATION, /* bDescriptorType: Configuration */ + USB_CDC_CONFIG_DESC_SIZ, /* wTotalLength:no of returned bytes */ + 0x00, + 0x02, /* bNumInterfaces: 2 interface */ + 0x01, /* bConfigurationValue: Configuration value */ + 0x00, /* iConfiguration: Index of string descriptor describing the configuration */ + 0xC0, /* bmAttributes: self powered */ + 0x32, /* MaxPower 0 mA */ + + /*---------------------------------------------------------------------------*/ + + /*Interface Descriptor */ + 0x09, /* bLength: Interface Descriptor size */ + USB_DESC_TYPE_INTERFACE, /* bDescriptorType: Interface */ + /* Interface descriptor type */ + 0x00, /* bInterfaceNumber: Number of Interface */ + 0x00, /* bAlternateSetting: Alternate setting */ + 0x01, /* bNumEndpoints: One endpoints used */ + 0x02, /* bInterfaceClass: Communication Interface Class */ + 0x02, /* bInterfaceSubClass: Abstract Control Model */ + 0x01, /* bInterfaceProtocol: Common AT commands */ + 0x00, /* iInterface: */ + + /*Header Functional Descriptor*/ + 0x05, /* bLength: Endpoint Descriptor size */ + 0x24, /* bDescriptorType: CS_INTERFACE */ + 0x00, /* bDescriptorSubtype: Header Func Desc */ + 0x10, /* bcdCDC: spec release number */ + 0x01, + + /*Call Management Functional Descriptor*/ + 0x05, /* bFunctionLength */ + 0x24, /* bDescriptorType: CS_INTERFACE */ + 0x01, /* bDescriptorSubtype: Call Management Func Desc */ + 0x00, /* bmCapabilities: D0+D1 */ + 0x01, /* bDataInterface: 1 */ + + /*ACM Functional Descriptor*/ + 0x04, /* bFunctionLength */ + 0x24, /* bDescriptorType: CS_INTERFACE */ + 0x02, /* bDescriptorSubtype: Abstract Control Management desc */ + 0x02, /* bmCapabilities */ + + /*Union Functional Descriptor*/ + 0x05, /* bFunctionLength */ + 0x24, /* bDescriptorType: CS_INTERFACE */ + 0x06, /* bDescriptorSubtype: Union func desc */ + 0x00, /* bMasterInterface: Communication class interface */ + 0x01, /* bSlaveInterface0: Data Class Interface */ + + /*Endpoint 2 Descriptor*/ + 0x07, /* bLength: Endpoint Descriptor size */ + USB_DESC_TYPE_ENDPOINT, /* bDescriptorType: Endpoint */ + CDC_CMD_EP, /* bEndpointAddress */ + 0x03, /* bmAttributes: Interrupt */ + LOBYTE(CDC_CMD_PACKET_SIZE), /* wMaxPacketSize: */ + HIBYTE(CDC_CMD_PACKET_SIZE), + 0x10, /* bInterval: */ + /*---------------------------------------------------------------------------*/ + + /*Data class interface descriptor*/ + 0x09, /* bLength: Endpoint Descriptor size */ + USB_DESC_TYPE_INTERFACE, /* bDescriptorType: */ + 0x01, /* bInterfaceNumber: Number of Interface */ + 0x00, /* bAlternateSetting: Alternate setting */ + 0x02, /* bNumEndpoints: Two endpoints used */ + 0x0A, /* bInterfaceClass: CDC */ + 0x00, /* bInterfaceSubClass: */ + 0x00, /* bInterfaceProtocol: */ + 0x00, /* iInterface: */ + + /*Endpoint OUT Descriptor*/ + 0x07, /* bLength: Endpoint Descriptor size */ + USB_DESC_TYPE_ENDPOINT, /* bDescriptorType: Endpoint */ + CDC_OUT_EP, /* bEndpointAddress */ + 0x02, /* bmAttributes: Bulk */ + LOBYTE(CDC_DATA_HS_MAX_PACKET_SIZE), /* wMaxPacketSize: */ + HIBYTE(CDC_DATA_HS_MAX_PACKET_SIZE), + 0x00, /* bInterval: ignore for Bulk transfer */ + + /*Endpoint IN Descriptor*/ + 0x07, /* bLength: Endpoint Descriptor size */ + USB_DESC_TYPE_ENDPOINT, /* bDescriptorType: Endpoint */ + CDC_IN_EP, /* bEndpointAddress */ + 0x02, /* bmAttributes: Bulk */ + LOBYTE(CDC_DATA_HS_MAX_PACKET_SIZE), /* wMaxPacketSize: */ + HIBYTE(CDC_DATA_HS_MAX_PACKET_SIZE), + 0x00 /* bInterval: ignore for Bulk transfer */ +} ; + + +/* USB CDC device Configuration Descriptor */ +__ALIGN_BEGIN uint8_t USBD_CDC_CfgFSDesc[USB_CDC_CONFIG_DESC_SIZ] __ALIGN_END = +{ + /*Configuration Descriptor*/ + 0x09, /* bLength: Configuration Descriptor size */ + USB_DESC_TYPE_CONFIGURATION, /* bDescriptorType: Configuration */ + USB_CDC_CONFIG_DESC_SIZ, /* wTotalLength:no of returned bytes */ + 0x00, + 0x02, /* bNumInterfaces: 2 interface */ + 0x01, /* bConfigurationValue: Configuration value */ + 0x00, /* iConfiguration: Index of string descriptor describing the configuration */ + 0xC0, /* bmAttributes: self powered */ + 0x32, /* MaxPower 0 mA */ + + /*---------------------------------------------------------------------------*/ + + /*Interface Descriptor */ + 0x09, /* bLength: Interface Descriptor size */ + USB_DESC_TYPE_INTERFACE, /* bDescriptorType: Interface */ + /* Interface descriptor type */ + 0x00, /* bInterfaceNumber: Number of Interface */ + 0x00, /* bAlternateSetting: Alternate setting */ + 0x01, /* bNumEndpoints: One endpoints used */ + 0x02, /* bInterfaceClass: Communication Interface Class */ + 0x02, /* bInterfaceSubClass: Abstract Control Model */ + 0x01, /* bInterfaceProtocol: Common AT commands */ + 0x00, /* iInterface: */ + + /*Header Functional Descriptor*/ + 0x05, /* bLength: Endpoint Descriptor size */ + 0x24, /* bDescriptorType: CS_INTERFACE */ + 0x00, /* bDescriptorSubtype: Header Func Desc */ + 0x10, /* bcdCDC: spec release number */ + 0x01, + + /*Call Management Functional Descriptor*/ + 0x05, /* bFunctionLength */ + 0x24, /* bDescriptorType: CS_INTERFACE */ + 0x01, /* bDescriptorSubtype: Call Management Func Desc */ + 0x00, /* bmCapabilities: D0+D1 */ + 0x01, /* bDataInterface: 1 */ + + /*ACM Functional Descriptor*/ + 0x04, /* bFunctionLength */ + 0x24, /* bDescriptorType: CS_INTERFACE */ + 0x02, /* bDescriptorSubtype: Abstract Control Management desc */ + 0x02, /* bmCapabilities */ + + /*Union Functional Descriptor*/ + 0x05, /* bFunctionLength */ + 0x24, /* bDescriptorType: CS_INTERFACE */ + 0x06, /* bDescriptorSubtype: Union func desc */ + 0x00, /* bMasterInterface: Communication class interface */ + 0x01, /* bSlaveInterface0: Data Class Interface */ + + /*Endpoint 2 Descriptor*/ + 0x07, /* bLength: Endpoint Descriptor size */ + USB_DESC_TYPE_ENDPOINT, /* bDescriptorType: Endpoint */ + CDC_CMD_EP, /* bEndpointAddress */ + 0x03, /* bmAttributes: Interrupt */ + LOBYTE(CDC_CMD_PACKET_SIZE), /* wMaxPacketSize: */ + HIBYTE(CDC_CMD_PACKET_SIZE), + 0x10, /* bInterval: */ + /*---------------------------------------------------------------------------*/ + + /*Data class interface descriptor*/ + 0x09, /* bLength: Endpoint Descriptor size */ + USB_DESC_TYPE_INTERFACE, /* bDescriptorType: */ + 0x01, /* bInterfaceNumber: Number of Interface */ + 0x00, /* bAlternateSetting: Alternate setting */ + 0x02, /* bNumEndpoints: Two endpoints used */ + 0x0A, /* bInterfaceClass: CDC */ + 0x00, /* bInterfaceSubClass: */ + 0x00, /* bInterfaceProtocol: */ + 0x00, /* iInterface: */ + + /*Endpoint OUT Descriptor*/ + 0x07, /* bLength: Endpoint Descriptor size */ + USB_DESC_TYPE_ENDPOINT, /* bDescriptorType: Endpoint */ + CDC_OUT_EP, /* bEndpointAddress */ + 0x02, /* bmAttributes: Bulk */ + LOBYTE(CDC_DATA_FS_MAX_PACKET_SIZE), /* wMaxPacketSize: */ + HIBYTE(CDC_DATA_FS_MAX_PACKET_SIZE), + 0x00, /* bInterval: ignore for Bulk transfer */ + + /*Endpoint IN Descriptor*/ + 0x07, /* bLength: Endpoint Descriptor size */ + USB_DESC_TYPE_ENDPOINT, /* bDescriptorType: Endpoint */ + CDC_IN_EP, /* bEndpointAddress */ + 0x02, /* bmAttributes: Bulk */ + LOBYTE(CDC_DATA_FS_MAX_PACKET_SIZE), /* wMaxPacketSize: */ + HIBYTE(CDC_DATA_FS_MAX_PACKET_SIZE), + 0x00 /* bInterval: ignore for Bulk transfer */ +} ; + +__ALIGN_BEGIN uint8_t USBD_CDC_OtherSpeedCfgDesc[USB_CDC_CONFIG_DESC_SIZ] __ALIGN_END = +{ + 0x09, /* bLength: Configuation Descriptor size */ + USB_DESC_TYPE_OTHER_SPEED_CONFIGURATION, + USB_CDC_CONFIG_DESC_SIZ, + 0x00, + 0x02, /* bNumInterfaces: 2 interfaces */ + 0x01, /* bConfigurationValue: */ + 0x04, /* iConfiguration: */ + 0xC0, /* bmAttributes: */ + 0x32, /* MaxPower 100 mA */ + + /*Interface Descriptor */ + 0x09, /* bLength: Interface Descriptor size */ + USB_DESC_TYPE_INTERFACE, /* bDescriptorType: Interface */ + /* Interface descriptor type */ + 0x00, /* bInterfaceNumber: Number of Interface */ + 0x00, /* bAlternateSetting: Alternate setting */ + 0x01, /* bNumEndpoints: One endpoints used */ + 0x02, /* bInterfaceClass: Communication Interface Class */ + 0x02, /* bInterfaceSubClass: Abstract Control Model */ + 0x01, /* bInterfaceProtocol: Common AT commands */ + 0x00, /* iInterface: */ + + /*Header Functional Descriptor*/ + 0x05, /* bLength: Endpoint Descriptor size */ + 0x24, /* bDescriptorType: CS_INTERFACE */ + 0x00, /* bDescriptorSubtype: Header Func Desc */ + 0x10, /* bcdCDC: spec release number */ + 0x01, + + /*Call Management Functional Descriptor*/ + 0x05, /* bFunctionLength */ + 0x24, /* bDescriptorType: CS_INTERFACE */ + 0x01, /* bDescriptorSubtype: Call Management Func Desc */ + 0x00, /* bmCapabilities: D0+D1 */ + 0x01, /* bDataInterface: 1 */ + + /*ACM Functional Descriptor*/ + 0x04, /* bFunctionLength */ + 0x24, /* bDescriptorType: CS_INTERFACE */ + 0x02, /* bDescriptorSubtype: Abstract Control Management desc */ + 0x02, /* bmCapabilities */ + + /*Union Functional Descriptor*/ + 0x05, /* bFunctionLength */ + 0x24, /* bDescriptorType: CS_INTERFACE */ + 0x06, /* bDescriptorSubtype: Union func desc */ + 0x00, /* bMasterInterface: Communication class interface */ + 0x01, /* bSlaveInterface0: Data Class Interface */ + + /*Endpoint 2 Descriptor*/ + 0x07, /* bLength: Endpoint Descriptor size */ + USB_DESC_TYPE_ENDPOINT , /* bDescriptorType: Endpoint */ + CDC_CMD_EP, /* bEndpointAddress */ + 0x03, /* bmAttributes: Interrupt */ + LOBYTE(CDC_CMD_PACKET_SIZE), /* wMaxPacketSize: */ + HIBYTE(CDC_CMD_PACKET_SIZE), + 0xFF, /* bInterval: */ + + /*---------------------------------------------------------------------------*/ + + /*Data class interface descriptor*/ + 0x09, /* bLength: Endpoint Descriptor size */ + USB_DESC_TYPE_INTERFACE, /* bDescriptorType: */ + 0x01, /* bInterfaceNumber: Number of Interface */ + 0x00, /* bAlternateSetting: Alternate setting */ + 0x02, /* bNumEndpoints: Two endpoints used */ + 0x0A, /* bInterfaceClass: CDC */ + 0x00, /* bInterfaceSubClass: */ + 0x00, /* bInterfaceProtocol: */ + 0x00, /* iInterface: */ + + /*Endpoint OUT Descriptor*/ + 0x07, /* bLength: Endpoint Descriptor size */ + USB_DESC_TYPE_ENDPOINT, /* bDescriptorType: Endpoint */ + CDC_OUT_EP, /* bEndpointAddress */ + 0x02, /* bmAttributes: Bulk */ + 0x40, /* wMaxPacketSize: */ + 0x00, + 0x00, /* bInterval: ignore for Bulk transfer */ + + /*Endpoint IN Descriptor*/ + 0x07, /* bLength: Endpoint Descriptor size */ + USB_DESC_TYPE_ENDPOINT, /* bDescriptorType: Endpoint */ + CDC_IN_EP, /* bEndpointAddress */ + 0x02, /* bmAttributes: Bulk */ + 0x40, /* wMaxPacketSize: */ + 0x00, + 0x00 /* bInterval */ +}; + +/** + * @} + */ + +/** @defgroup USBD_CDC_Private_Functions + * @{ + */ + +/** + * @brief USBD_CDC_Init + * Initialize the CDC interface + * @param pdev: device instance + * @param cfgidx: Configuration index + * @retval status + */ +static uint8_t USBD_CDC_Init (USBD_HandleTypeDef *pdev, + uint8_t cfgidx) +{ + uint8_t ret = 0; + USBD_CDC_HandleTypeDef *hcdc; + + if(pdev->dev_speed == USBD_SPEED_HIGH ) + { + /* Open EP IN */ + USBD_LL_OpenEP(pdev, + CDC_IN_EP, + USBD_EP_TYPE_BULK, + CDC_DATA_HS_IN_PACKET_SIZE); + + /* Open EP OUT */ + USBD_LL_OpenEP(pdev, + CDC_OUT_EP, + USBD_EP_TYPE_BULK, + CDC_DATA_HS_OUT_PACKET_SIZE); + + } + else + { + /* Open EP IN */ + USBD_LL_OpenEP(pdev, + CDC_IN_EP, + USBD_EP_TYPE_BULK, + CDC_DATA_FS_IN_PACKET_SIZE); + + /* Open EP OUT */ + USBD_LL_OpenEP(pdev, + CDC_OUT_EP, + USBD_EP_TYPE_BULK, + CDC_DATA_FS_OUT_PACKET_SIZE); + } + /* Open Command IN EP */ + USBD_LL_OpenEP(pdev, + CDC_CMD_EP, + USBD_EP_TYPE_INTR, + CDC_CMD_PACKET_SIZE); + + + pdev->pClassData = USBD_malloc(sizeof (USBD_CDC_HandleTypeDef)); + + if(pdev->pClassData == NULL) + { + ret = 1; + } + else + { + hcdc = (USBD_CDC_HandleTypeDef*) pdev->pClassData; + + /* Init physical Interface components */ + ((USBD_CDC_ItfTypeDef *)pdev->pUserData)->Init(); + + /* Init Xfer states */ + hcdc->TxState =0; + hcdc->RxState =0; + + if(pdev->dev_speed == USBD_SPEED_HIGH ) + { + /* Prepare Out endpoint to receive next packet */ + USBD_LL_PrepareReceive(pdev, + CDC_OUT_EP, + hcdc->RxBuffer, + CDC_DATA_HS_OUT_PACKET_SIZE); + } + else + { + /* Prepare Out endpoint to receive next packet */ + USBD_LL_PrepareReceive(pdev, + CDC_OUT_EP, + hcdc->RxBuffer, + CDC_DATA_FS_OUT_PACKET_SIZE); + } + + + } + return ret; +} + +/** + * @brief USBD_CDC_Init + * DeInitialize the CDC layer + * @param pdev: device instance + * @param cfgidx: Configuration index + * @retval status + */ +static uint8_t USBD_CDC_DeInit (USBD_HandleTypeDef *pdev, + uint8_t cfgidx) +{ + uint8_t ret = 0; + + /* Open EP IN */ + USBD_LL_CloseEP(pdev, + CDC_IN_EP); + + /* Open EP OUT */ + USBD_LL_CloseEP(pdev, + CDC_OUT_EP); + + /* Open Command IN EP */ + USBD_LL_CloseEP(pdev, + CDC_CMD_EP); + + + /* DeInit physical Interface components */ + if(pdev->pClassData != NULL) + { + ((USBD_CDC_ItfTypeDef *)pdev->pUserData)->DeInit(); + USBD_free(pdev->pClassData); + pdev->pClassData = NULL; + } + + return ret; +} + +/** + * @brief USBD_CDC_Setup + * Handle the CDC specific requests + * @param pdev: instance + * @param req: usb requests + * @retval status + */ +static uint8_t USBD_CDC_Setup (USBD_HandleTypeDef *pdev, + USBD_SetupReqTypedef *req) +{ + USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef*) pdev->pClassData; + static uint8_t ifalt = 0; + + switch (req->bmRequest & USB_REQ_TYPE_MASK) + { + case USB_REQ_TYPE_CLASS : + if (req->wLength) + { + if (req->bmRequest & 0x80) + { + ((USBD_CDC_ItfTypeDef *)pdev->pUserData)->Control(req->bRequest, + (uint8_t *)hcdc->data, + req->wLength); + USBD_CtlSendData (pdev, + (uint8_t *)hcdc->data, + req->wLength); + } + else + { + hcdc->CmdOpCode = req->bRequest; + hcdc->CmdLength = req->wLength; + + USBD_CtlPrepareRx (pdev, + (uint8_t *)hcdc->data, + req->wLength); + } + + } + else + { + ((USBD_CDC_ItfTypeDef *)pdev->pUserData)->Control(req->bRequest, + (uint8_t*)req, + 0); + } + break; + + case USB_REQ_TYPE_STANDARD: + switch (req->bRequest) + { + case USB_REQ_GET_INTERFACE : + USBD_CtlSendData (pdev, + &ifalt, + 1); + break; + + case USB_REQ_SET_INTERFACE : + break; + } + + default: + break; + } + return USBD_OK; +} + +/** + * @brief USBD_CDC_DataIn + * Data sent on non-control IN endpoint + * @param pdev: device instance + * @param epnum: endpoint number + * @retval status + */ +static uint8_t USBD_CDC_DataIn (USBD_HandleTypeDef *pdev, uint8_t epnum) +{ + USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef*) pdev->pClassData; + + if(pdev->pClassData != NULL) + { + + hcdc->TxState = 0; + + return USBD_OK; + } + else + { + return USBD_FAIL; + } +} + +/** + * @brief USBD_CDC_DataOut + * Data received on non-control Out endpoint + * @param pdev: device instance + * @param epnum: endpoint number + * @retval status + */ +static uint8_t USBD_CDC_DataOut (USBD_HandleTypeDef *pdev, uint8_t epnum) +{ + USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef*) pdev->pClassData; + + /* Get the received data length */ + hcdc->RxLength = USBD_LL_GetRxDataSize (pdev, epnum); + + /* USB data will be immediately processed, this allow next USB traffic being + NAKed till the end of the application Xfer */ + if(pdev->pClassData != NULL) + { + ((USBD_CDC_ItfTypeDef *)pdev->pUserData)->Receive(hcdc->RxBuffer, &hcdc->RxLength); + + return USBD_OK; + } + else + { + return USBD_FAIL; + } +} + + + +/** + * @brief USBD_CDC_DataOut + * Data received on non-control Out endpoint + * @param pdev: device instance + * @param epnum: endpoint number + * @retval status + */ +static uint8_t USBD_CDC_EP0_RxReady (USBD_HandleTypeDef *pdev) +{ + USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef*) pdev->pClassData; + + if((pdev->pUserData != NULL) && (hcdc->CmdOpCode != 0xFF)) + { + ((USBD_CDC_ItfTypeDef *)pdev->pUserData)->Control(hcdc->CmdOpCode, + (uint8_t *)hcdc->data, + hcdc->CmdLength); + hcdc->CmdOpCode = 0xFF; + + } + return USBD_OK; +} + +/** + * @brief USBD_CDC_GetFSCfgDesc + * Return configuration descriptor + * @param speed : current device speed + * @param length : pointer data length + * @retval pointer to descriptor buffer + */ +static uint8_t *USBD_CDC_GetFSCfgDesc (uint16_t *length) +{ + *length = sizeof (USBD_CDC_CfgFSDesc); + return USBD_CDC_CfgFSDesc; +} + +/** + * @brief USBD_CDC_GetHSCfgDesc + * Return configuration descriptor + * @param speed : current device speed + * @param length : pointer data length + * @retval pointer to descriptor buffer + */ +static uint8_t *USBD_CDC_GetHSCfgDesc (uint16_t *length) +{ + *length = sizeof (USBD_CDC_CfgHSDesc); + return USBD_CDC_CfgHSDesc; +} + +/** + * @brief USBD_CDC_GetCfgDesc + * Return configuration descriptor + * @param speed : current device speed + * @param length : pointer data length + * @retval pointer to descriptor buffer + */ +static uint8_t *USBD_CDC_GetOtherSpeedCfgDesc (uint16_t *length) +{ + *length = sizeof (USBD_CDC_OtherSpeedCfgDesc); + return USBD_CDC_OtherSpeedCfgDesc; +} + +/** +* @brief DeviceQualifierDescriptor +* return Device Qualifier descriptor +* @param length : pointer data length +* @retval pointer to descriptor buffer +*/ +uint8_t *USBD_CDC_GetDeviceQualifierDescriptor (uint16_t *length) +{ + *length = sizeof (USBD_CDC_DeviceQualifierDesc); + return USBD_CDC_DeviceQualifierDesc; +} + +/** +* @brief USBD_CDC_RegisterInterface + * @param pdev: device instance + * @param fops: CD Interface callback + * @retval status + */ +uint8_t USBD_CDC_RegisterInterface (USBD_HandleTypeDef *pdev, + USBD_CDC_ItfTypeDef *fops) +{ + uint8_t ret = USBD_FAIL; + + if(fops != NULL) + { + pdev->pUserData= fops; + ret = USBD_OK; + } + + return ret; +} + +/** + * @brief USBD_CDC_SetTxBuffer + * @param pdev: device instance + * @param pbuff: Tx Buffer + * @retval status + */ +uint8_t USBD_CDC_SetTxBuffer (USBD_HandleTypeDef *pdev, + uint8_t *pbuff, + uint16_t length) +{ + USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef*) pdev->pClassData; + + hcdc->TxBuffer = pbuff; + hcdc->TxLength = length; + + return USBD_OK; +} + + +/** + * @brief USBD_CDC_SetRxBuffer + * @param pdev: device instance + * @param pbuff: Rx Buffer + * @retval status + */ +uint8_t USBD_CDC_SetRxBuffer (USBD_HandleTypeDef *pdev, + uint8_t *pbuff) +{ + USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef*) pdev->pClassData; + + hcdc->RxBuffer = pbuff; + + return USBD_OK; +} + +/** + * @brief USBD_CDC_DataOut + * Data received on non-control Out endpoint + * @param pdev: device instance + * @param epnum: endpoint number + * @retval status + */ +uint8_t USBD_CDC_TransmitPacket(USBD_HandleTypeDef *pdev) +{ + USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef*) pdev->pClassData; + + if(pdev->pClassData != NULL) + { + if(hcdc->TxState == 0) + { + /* Tx Transfer in progress */ + hcdc->TxState = 1; + + /* Transmit next packet */ + USBD_LL_Transmit(pdev, + CDC_IN_EP, + hcdc->TxBuffer, + hcdc->TxLength); + + return USBD_OK; + } + else + { + return USBD_BUSY; + } + } + else + { + return USBD_FAIL; + } +} + + +/** + * @brief USBD_CDC_ReceivePacket + * prepare OUT Endpoint for reception + * @param pdev: device instance + * @retval status + */ +uint8_t USBD_CDC_ReceivePacket(USBD_HandleTypeDef *pdev) +{ + USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef*) pdev->pClassData; + + /* Suspend or Resume USB Out process */ + if(pdev->pClassData != NULL) + { + if(pdev->dev_speed == USBD_SPEED_HIGH ) + { + /* Prepare Out endpoint to receive next packet */ + USBD_LL_PrepareReceive(pdev, + CDC_OUT_EP, + hcdc->RxBuffer, + CDC_DATA_HS_OUT_PACKET_SIZE); + } + else + { + /* Prepare Out endpoint to receive next packet */ + USBD_LL_PrepareReceive(pdev, + CDC_OUT_EP, + hcdc->RxBuffer, + CDC_DATA_FS_OUT_PACKET_SIZE); + } + return USBD_OK; + } + else + { + return USBD_FAIL; + } +} +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32_USB_Device_Library/Class/DFU/Inc/usbd_dfu.h b/src/boards/mcu/stm32/STM32_USB_Device_Library/Class/DFU/Inc/usbd_dfu.h new file mode 100755 index 0000000..fb2d560 --- /dev/null +++ b/src/boards/mcu/stm32/STM32_USB_Device_Library/Class/DFU/Inc/usbd_dfu.h @@ -0,0 +1,235 @@ +/** + ****************************************************************************** + * @file usbd_dfu.h + * @author MCD Application Team + * @version V2.4.2 + * @date 11-December-2015 + * @brief Header file for the usbd_dfu.c file. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT 2015 STMicroelectronics

+ * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __USB_DFU_H +#define __USB_DFU_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "usbd_ioreq.h" + +/** @addtogroup STM32_USB_DEVICE_LIBRARY + * @{ + */ + +/** @defgroup USBD_DFU + * @brief This file is the Header file for usbd_dfu.c + * @{ + */ + + +/** @defgroup USBD_DFU_Exported_Defines + * @{ + */ + +#define USB_DFU_CONFIG_DESC_SIZ (18 + (9 * USBD_DFU_MAX_ITF_NUM)) +#define USB_DFU_DESC_SIZ 9 + +#define DFU_DESCRIPTOR_TYPE 0x21 + + +/**************************************************/ +/* DFU Requests DFU states */ +/**************************************************/ +#define APP_STATE_IDLE 0 +#define APP_STATE_DETACH 1 +#define DFU_STATE_IDLE 2 +#define DFU_STATE_DNLOAD_SYNC 3 +#define DFU_STATE_DNLOAD_BUSY 4 +#define DFU_STATE_DNLOAD_IDLE 5 +#define DFU_STATE_MANIFEST_SYNC 6 +#define DFU_STATE_MANIFEST 7 +#define DFU_STATE_MANIFEST_WAIT_RESET 8 +#define DFU_STATE_UPLOAD_IDLE 9 +#define DFU_STATE_ERROR 10 + +/**************************************************/ +/* DFU errors */ +/**************************************************/ +#define DFU_ERROR_NONE 0x00 +#define DFU_ERROR_TARGET 0x01 +#define DFU_ERROR_FILE 0x02 +#define DFU_ERROR_WRITE 0x03 +#define DFU_ERROR_ERASE 0x04 +#define DFU_ERROR_CHECK_ERASED 0x05 +#define DFU_ERROR_PROG 0x06 +#define DFU_ERROR_VERIFY 0x07 +#define DFU_ERROR_ADDRESS 0x08 +#define DFU_ERROR_NOTDONE 0x09 +#define DFU_ERROR_FIRMWARE 0x0A +#define DFU_ERROR_VENDOR 0x0B +#define DFU_ERROR_USB 0x0C +#define DFU_ERROR_POR 0x0D +#define DFU_ERROR_UNKNOWN 0x0E +#define DFU_ERROR_STALLEDPKT 0x0F + +/**************************************************/ +/* DFU Manifestation State */ +/**************************************************/ +#define DFU_MANIFEST_COMPLETE 0x00 +#define DFU_MANIFEST_IN_PROGRESS 0x01 + + +/**************************************************/ +/* Special Commands with Download Request */ +/**************************************************/ +#define DFU_CMD_GETCOMMANDS 0x00 +#define DFU_CMD_SETADDRESSPOINTER 0x21 +#define DFU_CMD_ERASE 0x41 + +#define DFU_MEDIA_ERASE 0x00 +#define DFU_MEDIA_PROGRAM 0x01 + +/**************************************************/ +/* Other defines */ +/**************************************************/ +/* Bit Detach capable = bit 3 in bmAttributes field */ +#define DFU_DETACH_MASK (uint8_t)(1 << 4) +#define DFU_STATUS_DEPTH (6) + +typedef enum +{ + DFU_DETACH = 0, + DFU_DNLOAD , + DFU_UPLOAD, + DFU_GETSTATUS, + DFU_CLRSTATUS, + DFU_GETSTATE, + DFU_ABORT +} DFU_RequestTypeDef; + +typedef void (*pFunction)(void); + + +/********** Descriptor of DFU interface 0 Alternate setting n ****************/ +#define USBD_DFU_IF_DESC(n) 0x09, /* bLength: Interface Descriptor size */ \ + USB_DESC_TYPE_INTERFACE, /* bDescriptorType */ \ + 0x00, /* bInterfaceNumber: Number of Interface */ \ + (n), /* bAlternateSetting: Alternate setting */ \ + 0x00, /* bNumEndpoints*/ \ + 0xFE, /* bInterfaceClass: Application Specific Class Code */ \ + 0x01, /* bInterfaceSubClass : Device Firmware Upgrade Code */ \ + 0x02, /* nInterfaceProtocol: DFU mode protocol */ \ + USBD_IDX_INTERFACE_STR + (n) + 1 /* iInterface: Index of string descriptor */ \ + +#define TRANSFER_SIZE_BYTES(size) ((uint8_t)(size)), /* XFERSIZEB0 */\ + ((uint8_t)(size >> 8)) /* XFERSIZEB1 */ + +#define IS_PROTECTED_AREA(add) (uint8_t)(((add >= 0x08000000) && (add < (APP_DEFAULT_ADD)))? 1:0) + +/** + * @} + */ + + +/** @defgroup USBD_CORE_Exported_TypesDefinitions + * @{ + */ + +typedef struct +{ + union + { + uint32_t d32[USBD_DFU_XFER_SIZE/4]; + uint8_t d8[USBD_DFU_XFER_SIZE]; + }buffer; + + uint8_t dev_state; + uint8_t dev_status[DFU_STATUS_DEPTH]; + uint8_t manif_state; + + uint32_t wblock_num; + uint32_t wlength; + uint32_t data_ptr; + __IO uint32_t alt_setting; + +} +USBD_DFU_HandleTypeDef; + + +typedef struct +{ + const uint8_t* pStrDesc; + uint16_t (* Init) (void); + uint16_t (* DeInit) (void); + uint16_t (* Erase) (uint32_t Add); + uint16_t (* Write) (uint8_t *src, uint8_t *dest, uint32_t Len); + uint8_t* (* Read) (uint8_t *src, uint8_t *dest, uint32_t Len); + uint16_t (* GetStatus)(uint32_t Add, uint8_t cmd, uint8_t *buff); +} +USBD_DFU_MediaTypeDef; +/** + * @} + */ + + + +/** @defgroup USBD_CORE_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup USBD_CORE_Exported_Variables + * @{ + */ + +extern USBD_ClassTypeDef USBD_DFU; +#define USBD_DFU_CLASS &USBD_DFU +/** + * @} + */ + +/** @defgroup USB_CORE_Exported_Functions + * @{ + */ +uint8_t USBD_DFU_RegisterMedia (USBD_HandleTypeDef *pdev, + USBD_DFU_MediaTypeDef *fops); +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __USB_DFU_H */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32_USB_Device_Library/Class/DFU/Src/usbd_dfu.c b/src/boards/mcu/stm32/STM32_USB_Device_Library/Class/DFU/Src/usbd_dfu.c new file mode 100755 index 0000000..82d5799 --- /dev/null +++ b/src/boards/mcu/stm32/STM32_USB_Device_Library/Class/DFU/Src/usbd_dfu.c @@ -0,0 +1,1109 @@ +#if 0 +/** + ****************************************************************************** + * @file usbd_dfu.c + * @author MCD Application Team + * @version V2.4.2 + * @date 11-December-2015 + * @brief This file provides the DFU core functions. + * + * @verbatim + * + * =================================================================== + * DFU Class Driver Description + * =================================================================== + * This driver manages the DFU class V1.1 following the "Device Class Specification for + * Device Firmware Upgrade Version 1.1 Aug 5, 2004". + * This driver implements the following aspects of the specification: + * - Device descriptor management + * - Configuration descriptor management + * - Enumeration as DFU device (in DFU mode only) + * - Requests management (supporting ST DFU sub-protocol) + * - Memory operations management (Download/Upload/Erase/Detach/GetState/GetStatus) + * - DFU state machine implementation. + * + * @note + * ST DFU sub-protocol is compliant with DFU protocol and use sub-requests to manage + * memory addressing, commands processing, specific memories operations (ie. Erase) ... + * As required by the DFU specification, only endpoint 0 is used in this application. + * Other endpoints and functions may be added to the application (ie. DFU ...) + * + * These aspects may be enriched or modified for a specific user application. + * + * This driver doesn't implement the following aspects of the specification + * (but it is possible to manage these features with some modifications on this driver): + * - Manifestation Tolerant mode + * + * @endverbatim + * + ****************************************************************************** + * @attention + * + *

© COPYRIGHT 2015 STMicroelectronics

+ * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "usbd_dfu.h" +#include "usbd_desc.h" +#include "usbd_ctlreq.h" + + +/** @addtogroup STM32_USB_DEVICE_LIBRARY + * @{ + */ + + +/** @defgroup USBD_DFU + * @brief usbd core module + * @{ + */ + +/** @defgroup USBD_DFU_Private_TypesDefinitions + * @{ + */ +/** + * @} + */ + + +/** @defgroup USBD_DFU_Private_Defines + * @{ + */ + +/** + * @} + */ + + +/** @defgroup USBD_DFU_Private_Macros + * @{ + */ +#define DFU_SAMPLE_FREQ(frq) (uint8_t)(frq), (uint8_t)((frq >> 8)), (uint8_t)((frq >> 16)) + +#define DFU_PACKET_SZE(frq) (uint8_t)(((frq * 2 * 2)/1000) & 0xFF), \ + (uint8_t)((((frq * 2 * 2)/1000) >> 8) & 0xFF) + +/** + * @} + */ + + + + +/** @defgroup USBD_DFU_Private_FunctionPrototypes + * @{ + */ + + +static uint8_t USBD_DFU_Init (USBD_HandleTypeDef *pdev, + uint8_t cfgidx); + +static uint8_t USBD_DFU_DeInit (USBD_HandleTypeDef *pdev, + uint8_t cfgidx); + +static uint8_t USBD_DFU_Setup (USBD_HandleTypeDef *pdev, + USBD_SetupReqTypedef *req); + +static uint8_t *USBD_DFU_GetCfgDesc (uint16_t *length); + +static uint8_t *USBD_DFU_GetDeviceQualifierDesc (uint16_t *length); + +static uint8_t USBD_DFU_DataIn (USBD_HandleTypeDef *pdev, uint8_t epnum); + +static uint8_t USBD_DFU_DataOut (USBD_HandleTypeDef *pdev, uint8_t epnum); + +static uint8_t USBD_DFU_EP0_RxReady (USBD_HandleTypeDef *pdev); + +static uint8_t USBD_DFU_EP0_TxReady (USBD_HandleTypeDef *pdev); + +static uint8_t USBD_DFU_SOF (USBD_HandleTypeDef *pdev); + +static uint8_t USBD_DFU_IsoINIncomplete (USBD_HandleTypeDef *pdev, uint8_t epnum); + +static uint8_t USBD_DFU_IsoOutIncomplete (USBD_HandleTypeDef *pdev, uint8_t epnum); + +#if (USBD_SUPPORT_USER_STRING == 1) +static uint8_t* USBD_DFU_GetUsrStringDesc ( USBD_HandleTypeDef *pdev, uint8_t index , uint16_t *length); +#endif + +static void DFU_Detach (USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req); + +static void DFU_Download (USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req); + +static void DFU_Upload (USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req); + +static void DFU_GetStatus (USBD_HandleTypeDef *pdev); + +static void DFU_ClearStatus (USBD_HandleTypeDef *pdev); + +static void DFU_GetState (USBD_HandleTypeDef *pdev); + +static void DFU_Abort (USBD_HandleTypeDef *pdev); + +static void DFU_Leave (USBD_HandleTypeDef *pdev); + + +/** + * @} + */ + +/** @defgroup USBD_DFU_Private_Variables + * @{ + */ + +USBD_ClassTypeDef USBD_DFU = +{ + USBD_DFU_Init, + USBD_DFU_DeInit, + USBD_DFU_Setup, + USBD_DFU_EP0_TxReady, + USBD_DFU_EP0_RxReady, + USBD_DFU_DataIn, + USBD_DFU_DataOut, + USBD_DFU_SOF, + USBD_DFU_IsoINIncomplete, + USBD_DFU_IsoOutIncomplete, + USBD_DFU_GetCfgDesc, + USBD_DFU_GetCfgDesc, + USBD_DFU_GetCfgDesc, + USBD_DFU_GetDeviceQualifierDesc, +#if (USBD_SUPPORT_USER_STRING == 1) + USBD_DFU_GetUsrStringDesc +#endif +}; + +/* USB DFU device Configuration Descriptor */ +__ALIGN_BEGIN static uint8_t USBD_DFU_CfgDesc[USB_DFU_CONFIG_DESC_SIZ] __ALIGN_END = +{ + 0x09, /* bLength: Configuation Descriptor size */ + USB_DESC_TYPE_CONFIGURATION, /* bDescriptorType: Configuration */ + USB_DFU_CONFIG_DESC_SIZ, + /* wTotalLength: Bytes returned */ + 0x00, + 0x01, /*bNumInterfaces: 1 interface*/ + 0x01, /*bConfigurationValue: Configuration value*/ + 0x02, /*iConfiguration: Index of string descriptor describing the configuration*/ + 0xC0, /*bmAttributes: bus powered and Supprts Remote Wakeup */ + 0x32, /*MaxPower 100 mA: this current is used for detecting Vbus*/ + /* 09 */ + + /********** Descriptor of DFU interface 0 Alternate setting 0 **************/ + USBD_DFU_IF_DESC(0), /* This interface is mandatory for all devices */ + +#if (USBD_DFU_MAX_ITF_NUM > 1) + /********** Descriptor of DFU interface 0 Alternate setting 1 **************/ + USBD_DFU_IF_DESC(1), +#endif /* (USBD_DFU_MAX_ITF_NUM > 1) */ + +#if (USBD_DFU_MAX_ITF_NUM > 2) + /********** Descriptor of DFU interface 0 Alternate setting 2 **************/ + USBD_DFU_IF_DESC(2), +#endif /* (USBD_DFU_MAX_ITF_NUM > 2) */ + +#if (USBD_DFU_MAX_ITF_NUM > 3) + /********** Descriptor of DFU interface 0 Alternate setting 3 **************/ + USBD_DFU_IF_DESC(3), +#endif /* (USBD_DFU_MAX_ITF_NUM > 3) */ + +#if (USBD_DFU_MAX_ITF_NUM > 4) + /********** Descriptor of DFU interface 0 Alternate setting 4 **************/ + USBD_DFU_IF_DESC(4), +#endif /* (USBD_DFU_MAX_ITF_NUM > 4) */ + +#if (USBD_DFU_MAX_ITF_NUM > 5) + /********** Descriptor of DFU interface 0 Alternate setting 5 **************/ + USBD_DFU_IF_DESC(5), +#endif /* (USBD_DFU_MAX_ITF_NUM > 5) */ + +#if (USBD_DFU_MAX_ITF_NUM > 6) +#error "ERROR: usbd_dfu_core.c: Modify the file to support more descriptors!" +#endif /* (USBD_DFU_MAX_ITF_NUM > 6) */ + + /******************** DFU Functional Descriptor********************/ + 0x09, /*blength = 9 Bytes*/ + DFU_DESCRIPTOR_TYPE, /* DFU Functional Descriptor*/ + 0x0B, /*bmAttribute + bitCanDnload = 1 (bit 0) + bitCanUpload = 1 (bit 1) + bitManifestationTolerant = 0 (bit 2) + bitWillDetach = 1 (bit 3) + Reserved (bit4-6) + bitAcceleratedST = 0 (bit 7)*/ + 0xFF, /*DetachTimeOut= 255 ms*/ + 0x00, + /*WARNING: In DMA mode the multiple MPS packets feature is still not supported + ==> In this case, when using DMA USBD_DFU_XFER_SIZE should be set to 64 in usbd_conf.h */ + TRANSFER_SIZE_BYTES(USBD_DFU_XFER_SIZE), /* TransferSize = 1024 Byte*/ + 0x1A, /* bcdDFUVersion*/ + 0x01 + /***********************************************************/ + /* 9*/ +}; + +/* USB Standard Device Descriptor */ +__ALIGN_BEGIN static uint8_t USBD_DFU_DeviceQualifierDesc[USB_LEN_DEV_QUALIFIER_DESC] __ALIGN_END = +{ + USB_LEN_DEV_QUALIFIER_DESC, + USB_DESC_TYPE_DEVICE_QUALIFIER, + 0x00, + 0x02, + 0x00, + 0x00, + 0x00, + 0x40, + 0x01, + 0x00, +}; + +/** + * @} + */ + +/** @defgroup USBD_DFU_Private_Functions + * @{ + */ + +/** + * @brief USBD_DFU_Init + * Initialize the DFU interface + * @param pdev: device instance + * @param cfgidx: Configuration index + * @retval status + */ +static uint8_t USBD_DFU_Init (USBD_HandleTypeDef *pdev, + uint8_t cfgidx) +{ + USBD_DFU_HandleTypeDef *hdfu; + + /* Allocate Audio structure */ + pdev->pClassData = USBD_malloc(sizeof (USBD_DFU_HandleTypeDef)); + + if(pdev->pClassData == NULL) + { + return USBD_FAIL; + } + else + { + hdfu = (USBD_DFU_HandleTypeDef*) pdev->pClassData; + + hdfu->alt_setting = 0; + hdfu->data_ptr = USBD_DFU_APP_DEFAULT_ADD; + hdfu->wblock_num = 0; + hdfu->wlength = 0; + + hdfu->manif_state = DFU_MANIFEST_COMPLETE; + hdfu->dev_state = DFU_STATE_IDLE; + + hdfu->dev_status[0] = DFU_ERROR_NONE; + hdfu->dev_status[1] = 0; + hdfu->dev_status[2] = 0; + hdfu->dev_status[3] = 0; + hdfu->dev_status[4] = DFU_STATE_IDLE; + hdfu->dev_status[5] = 0; + + /* Initialize Hardware layer */ + if (((USBD_DFU_MediaTypeDef *)pdev->pUserData)->Init() != USBD_OK) + { + return USBD_FAIL; + } + } + return USBD_OK; +} + +/** + * @brief USBD_DFU_Init + * De-Initialize the DFU layer + * @param pdev: device instance + * @param cfgidx: Configuration index + * @retval status + */ +static uint8_t USBD_DFU_DeInit (USBD_HandleTypeDef *pdev, + uint8_t cfgidx) +{ + USBD_DFU_HandleTypeDef *hdfu; + hdfu = (USBD_DFU_HandleTypeDef*) pdev->pClassData; + + hdfu->wblock_num = 0; + hdfu->wlength = 0; + + hdfu->dev_state = DFU_STATE_IDLE; + hdfu->dev_status[0] = DFU_ERROR_NONE; + hdfu->dev_status[4] = DFU_STATE_IDLE; + + /* DeInit physical Interface components */ + if(pdev->pClassData != NULL) + { + /* De-Initialize Hardware layer */ + ((USBD_DFU_MediaTypeDef *)pdev->pUserData)->DeInit(); + USBD_free(pdev->pClassData); + pdev->pClassData = NULL; + } + + return USBD_OK; +} + +/** + * @brief USBD_DFU_Setup + * Handle the DFU specific requests + * @param pdev: instance + * @param req: usb requests + * @retval status + */ +static uint8_t USBD_DFU_Setup (USBD_HandleTypeDef *pdev, + USBD_SetupReqTypedef *req) +{ + uint8_t *pbuf = 0; + uint16_t len = 0; + uint8_t ret = USBD_OK; + USBD_DFU_HandleTypeDef *hdfu; + + hdfu = (USBD_DFU_HandleTypeDef*) pdev->pClassData; + + switch (req->bmRequest & USB_REQ_TYPE_MASK) + { + case USB_REQ_TYPE_CLASS : + switch (req->bRequest) + { + case DFU_DNLOAD: + DFU_Download(pdev, req); + break; + + case DFU_UPLOAD: + DFU_Upload(pdev, req); + break; + + case DFU_GETSTATUS: + DFU_GetStatus(pdev); + break; + + case DFU_CLRSTATUS: + DFU_ClearStatus(pdev); + break; + + case DFU_GETSTATE: + DFU_GetState(pdev); + break; + + case DFU_ABORT: + DFU_Abort(pdev); + break; + + case DFU_DETACH: + DFU_Detach(pdev, req); + break; + + + default: + USBD_CtlError (pdev, req); + ret = USBD_FAIL; + } + break; + + case USB_REQ_TYPE_STANDARD: + switch (req->bRequest) + { + case USB_REQ_GET_DESCRIPTOR: + if( (req->wValue >> 8) == DFU_DESCRIPTOR_TYPE) + { + pbuf = USBD_DFU_CfgDesc + (9 * (USBD_DFU_MAX_ITF_NUM + 1)); + len = MIN(USB_DFU_DESC_SIZ , req->wLength); + } + + USBD_CtlSendData (pdev, + pbuf, + len); + break; + + case USB_REQ_GET_INTERFACE : + USBD_CtlSendData (pdev, + (uint8_t *)&hdfu->alt_setting, + 1); + break; + + case USB_REQ_SET_INTERFACE : + if ((uint8_t)(req->wValue) < USBD_DFU_MAX_ITF_NUM) + { + hdfu->alt_setting = (uint8_t)(req->wValue); + } + else + { + /* Call the error management function (command will be nacked */ + USBD_CtlError (pdev, req); + ret = USBD_FAIL; + } + break; + + default: + USBD_CtlError (pdev, req); + ret = USBD_FAIL; + } + } + return ret; +} + + +/** + * @brief USBD_DFU_GetCfgDesc + * return configuration descriptor + * @param speed : current device speed + * @param length : pointer data length + * @retval pointer to descriptor buffer + */ +static uint8_t *USBD_DFU_GetCfgDesc (uint16_t *length) +{ + *length = sizeof (USBD_DFU_CfgDesc); + return USBD_DFU_CfgDesc; +} + +/** + * @brief USBD_DFU_DataIn + * handle data IN Stage + * @param pdev: device instance + * @param epnum: endpoint index + * @retval status + */ +static uint8_t USBD_DFU_DataIn (USBD_HandleTypeDef *pdev, + uint8_t epnum) +{ + + return USBD_OK; +} + +/** + * @brief USBD_DFU_EP0_RxReady + * handle EP0 Rx Ready event + * @param pdev: device instance + * @retval status + */ +static uint8_t USBD_DFU_EP0_RxReady (USBD_HandleTypeDef *pdev) +{ + + return USBD_OK; +} +/** + * @brief USBD_DFU_EP0_TxReady + * handle EP0 TRx Ready event + * @param pdev: device instance + * @retval status + */ +static uint8_t USBD_DFU_EP0_TxReady (USBD_HandleTypeDef *pdev) +{ + uint32_t addr; + USBD_SetupReqTypedef req; + USBD_DFU_HandleTypeDef *hdfu; + + hdfu = (USBD_DFU_HandleTypeDef*) pdev->pClassData; + + if (hdfu->dev_state == DFU_STATE_DNLOAD_BUSY) + { + /* Decode the Special Command*/ + if (hdfu->wblock_num == 0) + { + if ((hdfu->buffer.d8[0] == DFU_CMD_GETCOMMANDS) && (hdfu->wlength == 1)) + { + + } + else if (( hdfu->buffer.d8[0] == DFU_CMD_SETADDRESSPOINTER ) && (hdfu->wlength == 5)) + { + hdfu->data_ptr = hdfu->buffer.d8[1]; + hdfu->data_ptr += hdfu->buffer.d8[2] << 8; + hdfu->data_ptr += hdfu->buffer.d8[3] << 16; + hdfu->data_ptr += hdfu->buffer.d8[4] << 24; + } + else if (( hdfu->buffer.d8[0] == DFU_CMD_ERASE ) && (hdfu->wlength == 5)) + { + hdfu->data_ptr = hdfu->buffer.d8[1]; + hdfu->data_ptr += hdfu->buffer.d8[2] << 8; + hdfu->data_ptr += hdfu->buffer.d8[3] << 16; + hdfu->data_ptr += hdfu->buffer.d8[4] << 24; + + if (((USBD_DFU_MediaTypeDef *)pdev->pUserData)->Erase(hdfu->data_ptr) != USBD_OK) + { + return USBD_FAIL; + } + } + else + { + /* Reset the global length and block number */ + hdfu->wlength = 0; + hdfu->wblock_num = 0; + /* Call the error management function (command will be nacked) */ + req.bmRequest = 0; + req.wLength = 1; + USBD_CtlError (pdev, &req); + } + } + /* Regular Download Command */ + else if (hdfu->wblock_num > 1) + { + /* Decode the required address */ + addr = ((hdfu->wblock_num - 2) * USBD_DFU_XFER_SIZE) + hdfu->data_ptr; + + /* Preform the write operation */ + if (((USBD_DFU_MediaTypeDef *)pdev->pUserData)->Write(hdfu->buffer.d8, (uint8_t *)addr, hdfu->wlength) != USBD_OK) + { + return USBD_FAIL; + } + } + /* Reset the global length and block number */ + hdfu->wlength = 0; + hdfu->wblock_num = 0; + + /* Update the state machine */ + hdfu->dev_state = DFU_STATE_DNLOAD_SYNC; + + hdfu->dev_status[1] = 0; + hdfu->dev_status[2] = 0; + hdfu->dev_status[3] = 0; + hdfu->dev_status[4] = hdfu->dev_state; + return USBD_OK; + } + else if (hdfu->dev_state == DFU_STATE_MANIFEST)/* Manifestation in progress*/ + { + /* Start leaving DFU mode */ + DFU_Leave(pdev); + } + + return USBD_OK; +} +/** + * @brief USBD_DFU_SOF + * handle SOF event + * @param pdev: device instance + * @retval status + */ +static uint8_t USBD_DFU_SOF (USBD_HandleTypeDef *pdev) +{ + + return USBD_OK; +} +/** + * @brief USBD_DFU_IsoINIncomplete + * handle data ISO IN Incomplete event + * @param pdev: device instance + * @param epnum: endpoint index + * @retval status + */ +static uint8_t USBD_DFU_IsoINIncomplete (USBD_HandleTypeDef *pdev, uint8_t epnum) +{ + + return USBD_OK; +} +/** + * @brief USBD_DFU_IsoOutIncomplete + * handle data ISO OUT Incomplete event + * @param pdev: device instance + * @param epnum: endpoint index + * @retval status + */ +static uint8_t USBD_DFU_IsoOutIncomplete (USBD_HandleTypeDef *pdev, uint8_t epnum) +{ + + return USBD_OK; +} +/** + * @brief USBD_DFU_DataOut + * handle data OUT Stage + * @param pdev: device instance + * @param epnum: endpoint index + * @retval status + */ +static uint8_t USBD_DFU_DataOut (USBD_HandleTypeDef *pdev, + uint8_t epnum) +{ + + return USBD_OK; +} + +/** +* @brief DeviceQualifierDescriptor +* return Device Qualifier descriptor +* @param length : pointer data length +* @retval pointer to descriptor buffer +*/ +static uint8_t *USBD_DFU_GetDeviceQualifierDesc (uint16_t *length) +{ + *length = sizeof (USBD_DFU_DeviceQualifierDesc); + return USBD_DFU_DeviceQualifierDesc; +} + +/** + * @brief USBD_DFU_GetUsrStringDesc + * Manages the transfer of memory interfaces string descriptors. + * @param speed : current device speed + * @param index: desciptor index + * @param length : pointer data length + * @retval pointer to the descriptor table or NULL if the descriptor is not supported. + */ +#if (USBD_SUPPORT_USER_STRING == 1) +static uint8_t* USBD_DFU_GetUsrStringDesc (USBD_HandleTypeDef *pdev, uint8_t index , uint16_t *length) +{ + static uint8_t USBD_StrDesc[255]; + /* Check if the requested string interface is supported */ + if (index <= (USBD_IDX_INTERFACE_STR + USBD_DFU_MAX_ITF_NUM)) + { + USBD_GetString ((uint8_t *)((USBD_DFU_MediaTypeDef *)pdev->pUserData)->pStrDesc, USBD_StrDesc, length); + return USBD_StrDesc; + } + /* Not supported Interface Descriptor index */ + else + { + return NULL; + } +} +#endif + +/** +* @brief USBD_MSC_RegisterStorage +* @param fops: storage callback +* @retval status +*/ +uint8_t USBD_DFU_RegisterMedia (USBD_HandleTypeDef *pdev, + USBD_DFU_MediaTypeDef *fops) +{ + if(fops != NULL) + { + pdev->pUserData= fops; + } + return 0; +} + +/****************************************************************************** + DFU Class requests management +******************************************************************************/ +/** + * @brief DFU_Detach + * Handles the DFU DETACH request. + * @param pdev: device instance + * @param req: pointer to the request structure. + * @retval None. + */ +static void DFU_Detach(USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req) +{ + USBD_DFU_HandleTypeDef *hdfu; + + hdfu = (USBD_DFU_HandleTypeDef*) pdev->pClassData; + + if (hdfu->dev_state == DFU_STATE_IDLE || hdfu->dev_state == DFU_STATE_DNLOAD_SYNC + || hdfu->dev_state == DFU_STATE_DNLOAD_IDLE || hdfu->dev_state == DFU_STATE_MANIFEST_SYNC + || hdfu->dev_state == DFU_STATE_UPLOAD_IDLE ) + { + /* Update the state machine */ + hdfu->dev_state = DFU_STATE_IDLE; + hdfu->dev_status[0] = DFU_ERROR_NONE; + hdfu->dev_status[1] = 0; + hdfu->dev_status[2] = 0; + hdfu->dev_status[3] = 0; /*bwPollTimeout=0ms*/ + hdfu->dev_status[4] = hdfu->dev_state; + hdfu->dev_status[5] = 0; /*iString*/ + hdfu->wblock_num = 0; + hdfu->wlength = 0; + } + + /* Check the detach capability in the DFU functional descriptor */ + if ((USBD_DFU_CfgDesc[12 + (9 * USBD_DFU_MAX_ITF_NUM)]) & DFU_DETACH_MASK) + { + /* Perform an Attach-Detach operation on USB bus */ + USBD_Stop (pdev); + USBD_Start (pdev); + } + else + { + /* Wait for the period of time specified in Detach request */ + USBD_Delay (req->wValue); + } +} + +/** + * @brief DFU_Download + * Handles the DFU DNLOAD request. + * @param pdev: device instance + * @param req: pointer to the request structure + * @retval None + */ +static void DFU_Download(USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req) +{ + USBD_DFU_HandleTypeDef *hdfu; + + hdfu = (USBD_DFU_HandleTypeDef*) pdev->pClassData; + + /* Data setup request */ + if (req->wLength > 0) + { + if ((hdfu->dev_state == DFU_STATE_IDLE) || (hdfu->dev_state == DFU_STATE_DNLOAD_IDLE)) + { + /* Update the global length and block number */ + hdfu->wblock_num = req->wValue; + hdfu->wlength = req->wLength; + + /* Update the state machine */ + hdfu->dev_state = DFU_STATE_DNLOAD_SYNC; + hdfu->dev_status[4] = hdfu->dev_state; + + /* Prepare the reception of the buffer over EP0 */ + USBD_CtlPrepareRx (pdev, + (uint8_t*)hdfu->buffer.d8, + hdfu->wlength); + } + /* Unsupported state */ + else + { + /* Call the error management function (command will be nacked */ + USBD_CtlError (pdev, req); + } + } + /* 0 Data DNLOAD request */ + else + { + /* End of DNLOAD operation*/ + if (hdfu->dev_state == DFU_STATE_DNLOAD_IDLE || hdfu->dev_state == DFU_STATE_IDLE ) + { + hdfu->manif_state = DFU_MANIFEST_IN_PROGRESS; + hdfu->dev_state = DFU_STATE_MANIFEST_SYNC; + hdfu->dev_status[1] = 0; + hdfu->dev_status[2] = 0; + hdfu->dev_status[3] = 0; + hdfu->dev_status[4] = hdfu->dev_state; + } + else + { + /* Call the error management function (command will be nacked */ + USBD_CtlError (pdev, req); + } + } +} + +/** + * @brief DFU_Upload + * Handles the DFU UPLOAD request. + * @param pdev: instance + * @param req: pointer to the request structure + * @retval status + */ +static void DFU_Upload(USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req) +{ + USBD_DFU_HandleTypeDef *hdfu; + + hdfu = (USBD_DFU_HandleTypeDef*) pdev->pClassData; + + uint8_t *phaddr = NULL; + uint32_t addr = 0; + + /* Data setup request */ + if (req->wLength > 0) + { + if ((hdfu->dev_state == DFU_STATE_IDLE) || (hdfu->dev_state == DFU_STATE_UPLOAD_IDLE)) + { + /* Update the global length and block number */ + hdfu->wblock_num = req->wValue; + hdfu->wlength = req->wLength; + + /* DFU Get Command */ + if (hdfu->wblock_num == 0) + { + /* Update the state machine */ + hdfu->dev_state = (hdfu->wlength > 3)? DFU_STATE_IDLE:DFU_STATE_UPLOAD_IDLE; + + hdfu->dev_status[1] = 0; + hdfu->dev_status[2] = 0; + hdfu->dev_status[3] = 0; + hdfu->dev_status[4] = hdfu->dev_state; + + /* Store the values of all supported commands */ + hdfu->buffer.d8[0] = DFU_CMD_GETCOMMANDS; + hdfu->buffer.d8[1] = DFU_CMD_SETADDRESSPOINTER; + hdfu->buffer.d8[2] = DFU_CMD_ERASE; + + /* Send the status data over EP0 */ + USBD_CtlSendData (pdev, + (uint8_t *)(&(hdfu->buffer.d8[0])), + 3); + } + else if (hdfu->wblock_num > 1) + { + hdfu->dev_state = DFU_STATE_UPLOAD_IDLE ; + + hdfu->dev_status[1] = 0; + hdfu->dev_status[2] = 0; + hdfu->dev_status[3] = 0; + hdfu->dev_status[4] = hdfu->dev_state; + + addr = ((hdfu->wblock_num - 2) * USBD_DFU_XFER_SIZE) + hdfu->data_ptr; /* Change is Accelerated*/ + + /* Return the physical address where data are stored */ + phaddr = ((USBD_DFU_MediaTypeDef *)pdev->pUserData)->Read((uint8_t *)addr, hdfu->buffer.d8, hdfu->wlength); + + /* Send the status data over EP0 */ + USBD_CtlSendData (pdev, + phaddr, + hdfu->wlength); + } + else /* unsupported hdfu->wblock_num */ + { + hdfu->dev_state = DFU_ERROR_STALLEDPKT; + + hdfu->dev_status[1] = 0; + hdfu->dev_status[2] = 0; + hdfu->dev_status[3] = 0; + hdfu->dev_status[4] = hdfu->dev_state; + + /* Call the error management function (command will be nacked */ + USBD_CtlError (pdev, req); + } + } + /* Unsupported state */ + else + { + hdfu->wlength = 0; + hdfu->wblock_num = 0; + /* Call the error management function (command will be nacked */ + USBD_CtlError (pdev, req); + } + } + /* No Data setup request */ + else + { + hdfu->dev_state = DFU_STATE_IDLE; + + hdfu->dev_status[1] = 0; + hdfu->dev_status[2] = 0; + hdfu->dev_status[3] = 0; + hdfu->dev_status[4] = hdfu->dev_state; + } +} + +/** + * @brief DFU_GetStatus + * Handles the DFU GETSTATUS request. + * @param pdev: instance + * @retval status + */ +static void DFU_GetStatus(USBD_HandleTypeDef *pdev) +{ + USBD_DFU_HandleTypeDef *hdfu; + + hdfu = (USBD_DFU_HandleTypeDef*) pdev->pClassData; + + switch (hdfu->dev_state) + { + case DFU_STATE_DNLOAD_SYNC: + if (hdfu->wlength != 0) + { + hdfu->dev_state = DFU_STATE_DNLOAD_BUSY; + + hdfu->dev_status[1] = 0; + hdfu->dev_status[2] = 0; + hdfu->dev_status[3] = 0; + hdfu->dev_status[4] = hdfu->dev_state; + + if ((hdfu->wblock_num == 0) && (hdfu->buffer.d8[0] == DFU_CMD_ERASE)) + { + ((USBD_DFU_MediaTypeDef *)pdev->pUserData)->GetStatus(hdfu->data_ptr, DFU_MEDIA_ERASE, hdfu->dev_status); + } + else + { + ((USBD_DFU_MediaTypeDef *)pdev->pUserData)->GetStatus(hdfu->data_ptr, DFU_MEDIA_PROGRAM, hdfu->dev_status); + } + } + else /* (hdfu->wlength==0)*/ + { + hdfu->dev_state = DFU_STATE_DNLOAD_IDLE; + + hdfu->dev_status[1] = 0; + hdfu->dev_status[2] = 0; + hdfu->dev_status[3] = 0; + hdfu->dev_status[4] = hdfu->dev_state; + } + break; + + case DFU_STATE_MANIFEST_SYNC : + if (hdfu->manif_state == DFU_MANIFEST_IN_PROGRESS) + { + hdfu->dev_state = DFU_STATE_MANIFEST; + + hdfu->dev_status[1] = 1; /*bwPollTimeout = 1ms*/ + hdfu->dev_status[2] = 0; + hdfu->dev_status[3] = 0; + hdfu->dev_status[4] = hdfu->dev_state; + } + else if ((hdfu->manif_state == DFU_MANIFEST_COMPLETE) && \ + ((USBD_DFU_CfgDesc[(11 + (9 * USBD_DFU_MAX_ITF_NUM))]) & 0x04)) + { + hdfu->dev_state = DFU_STATE_IDLE; + + hdfu->dev_status[1] = 0; + hdfu->dev_status[2] = 0; + hdfu->dev_status[3] = 0; + hdfu->dev_status[4] = hdfu->dev_state; + } + break; + + default : + break; + } + + /* Send the status data over EP0 */ + USBD_CtlSendData (pdev, + (uint8_t *)(&(hdfu->dev_status[0])), + 6); +} + +/** + * @brief DFU_ClearStatus + * Handles the DFU CLRSTATUS request. + * @param pdev: device instance + * @retval status + */ +static void DFU_ClearStatus(USBD_HandleTypeDef *pdev) +{ + USBD_DFU_HandleTypeDef *hdfu; + + hdfu = (USBD_DFU_HandleTypeDef*) pdev->pClassData; + + if (hdfu->dev_state == DFU_STATE_ERROR) + { + hdfu->dev_state = DFU_STATE_IDLE; + hdfu->dev_status[0] = DFU_ERROR_NONE;/*bStatus*/ + hdfu->dev_status[1] = 0; + hdfu->dev_status[2] = 0; + hdfu->dev_status[3] = 0; /*bwPollTimeout=0ms*/ + hdfu->dev_status[4] = hdfu->dev_state;/*bState*/ + hdfu->dev_status[5] = 0;/*iString*/ + } + else + { /*State Error*/ + hdfu->dev_state = DFU_STATE_ERROR; + hdfu->dev_status[0] = DFU_ERROR_UNKNOWN;/*bStatus*/ + hdfu->dev_status[1] = 0; + hdfu->dev_status[2] = 0; + hdfu->dev_status[3] = 0; /*bwPollTimeout=0ms*/ + hdfu->dev_status[4] = hdfu->dev_state;/*bState*/ + hdfu->dev_status[5] = 0;/*iString*/ + } +} + +/** + * @brief DFU_GetState + * Handles the DFU GETSTATE request. + * @param pdev: device instance + * @retval None + */ +static void DFU_GetState(USBD_HandleTypeDef *pdev) +{ + USBD_DFU_HandleTypeDef *hdfu; + + hdfu = (USBD_DFU_HandleTypeDef*) pdev->pClassData; + + /* Return the current state of the DFU interface */ + USBD_CtlSendData (pdev, + &hdfu->dev_state, + 1); +} + +/** + * @brief DFU_Abort + * Handles the DFU ABORT request. + * @param pdev: device instance + * @retval None + */ +static void DFU_Abort(USBD_HandleTypeDef *pdev) +{ + USBD_DFU_HandleTypeDef *hdfu; + + hdfu = (USBD_DFU_HandleTypeDef*) pdev->pClassData; + + if (hdfu->dev_state == DFU_STATE_IDLE || hdfu->dev_state == DFU_STATE_DNLOAD_SYNC + || hdfu->dev_state == DFU_STATE_DNLOAD_IDLE || hdfu->dev_state == DFU_STATE_MANIFEST_SYNC + || hdfu->dev_state == DFU_STATE_UPLOAD_IDLE ) + { + hdfu->dev_state = DFU_STATE_IDLE; + hdfu->dev_status[0] = DFU_ERROR_NONE; + hdfu->dev_status[1] = 0; + hdfu->dev_status[2] = 0; + hdfu->dev_status[3] = 0; /*bwPollTimeout=0ms*/ + hdfu->dev_status[4] = hdfu->dev_state; + hdfu->dev_status[5] = 0; /*iString*/ + hdfu->wblock_num = 0; + hdfu->wlength = 0; + } +} + +/** + * @brief DFU_Leave + * Handles the sub-protocol DFU leave DFU mode request (leaves DFU mode + * and resets device to jump to user loaded code). + * @param pdev: device instance + * @retval None + */ +void DFU_Leave(USBD_HandleTypeDef *pdev) +{ + USBD_DFU_HandleTypeDef *hdfu; + + hdfu = (USBD_DFU_HandleTypeDef*) pdev->pClassData; + + hdfu->manif_state = DFU_MANIFEST_COMPLETE; + + if ((USBD_DFU_CfgDesc[(11 + (9 * USBD_DFU_MAX_ITF_NUM))]) & 0x04) + { + hdfu->dev_state = DFU_STATE_MANIFEST_SYNC; + + hdfu->dev_status[1] = 0; + hdfu->dev_status[2] = 0; + hdfu->dev_status[3] = 0; + hdfu->dev_status[4] = hdfu->dev_state; + return; + } + else + { + + hdfu->dev_state = DFU_STATE_MANIFEST_WAIT_RESET; + + hdfu->dev_status[1] = 0; + hdfu->dev_status[2] = 0; + hdfu->dev_status[3] = 0; + hdfu->dev_status[4] = hdfu->dev_state; + + /* Disconnect the USB device */ + USBD_Stop (pdev); + + /* DeInitilialize the MAL(Media Access Layer) */ + ((USBD_DFU_MediaTypeDef *)pdev->pUserData)->DeInit(); + + /* Generate system reset to allow jumping to the user code */ + NVIC_SystemReset(); + + /* This instruction will not be reached (system reset) */ + for(;;); + } +} + +/** + * @} + */ + + +/** + * @} + */ + + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ +#endif \ No newline at end of file diff --git a/src/boards/mcu/stm32/STM32_USB_Device_Library/Core/Inc/usbd_core.h b/src/boards/mcu/stm32/STM32_USB_Device_Library/Core/Inc/usbd_core.h new file mode 100755 index 0000000..6550cd7 --- /dev/null +++ b/src/boards/mcu/stm32/STM32_USB_Device_Library/Core/Inc/usbd_core.h @@ -0,0 +1,167 @@ +/** + ****************************************************************************** + * @file usbd_core.h + * @author MCD Application Team + * @version V2.4.2 + * @date 11-December-2015 + * @brief Header file for usbd_core.c file + ****************************************************************************** + * @attention + * + *

© COPYRIGHT 2015 STMicroelectronics

+ * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __USBD_CORE_H +#define __USBD_CORE_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "usbd_conf.h" +#include "usbd_def.h" +#include "usbd_ioreq.h" +#include "usbd_ctlreq.h" + +/** @addtogroup STM32_USB_DEVICE_LIBRARY + * @{ + */ + +/** @defgroup USBD_CORE + * @brief This file is the Header file for usbd_core.c file + * @{ + */ + + +/** @defgroup USBD_CORE_Exported_Defines + * @{ + */ + +/** + * @} + */ + + +/** @defgroup USBD_CORE_Exported_TypesDefinitions + * @{ + */ + + +/** + * @} + */ + + + +/** @defgroup USBD_CORE_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup USBD_CORE_Exported_Variables + * @{ + */ +#define USBD_SOF USBD_LL_SOF +/** + * @} + */ + +/** @defgroup USBD_CORE_Exported_FunctionsPrototype + * @{ + */ +USBD_StatusTypeDef USBD_Init(USBD_HandleTypeDef *pdev, USBD_DescriptorsTypeDef *pdesc, uint8_t id); +USBD_StatusTypeDef USBD_DeInit(USBD_HandleTypeDef *pdev); +USBD_StatusTypeDef USBD_Start (USBD_HandleTypeDef *pdev); +USBD_StatusTypeDef USBD_Stop (USBD_HandleTypeDef *pdev); +USBD_StatusTypeDef USBD_RegisterClass(USBD_HandleTypeDef *pdev, USBD_ClassTypeDef *pclass); + +USBD_StatusTypeDef USBD_RunTestMode (USBD_HandleTypeDef *pdev); +USBD_StatusTypeDef USBD_SetClassConfig(USBD_HandleTypeDef *pdev, uint8_t cfgidx); +USBD_StatusTypeDef USBD_ClrClassConfig(USBD_HandleTypeDef *pdev, uint8_t cfgidx); + +USBD_StatusTypeDef USBD_LL_SetupStage(USBD_HandleTypeDef *pdev, uint8_t *psetup); +USBD_StatusTypeDef USBD_LL_DataOutStage(USBD_HandleTypeDef *pdev , uint8_t epnum, uint8_t *pdata); +USBD_StatusTypeDef USBD_LL_DataInStage(USBD_HandleTypeDef *pdev , uint8_t epnum, uint8_t *pdata); + +USBD_StatusTypeDef USBD_LL_Reset(USBD_HandleTypeDef *pdev); +USBD_StatusTypeDef USBD_LL_SetSpeed(USBD_HandleTypeDef *pdev, USBD_SpeedTypeDef speed); +USBD_StatusTypeDef USBD_LL_Suspend(USBD_HandleTypeDef *pdev); +USBD_StatusTypeDef USBD_LL_Resume(USBD_HandleTypeDef *pdev); + +USBD_StatusTypeDef USBD_LL_SOF(USBD_HandleTypeDef *pdev); +USBD_StatusTypeDef USBD_LL_IsoINIncomplete(USBD_HandleTypeDef *pdev, uint8_t epnum); +USBD_StatusTypeDef USBD_LL_IsoOUTIncomplete(USBD_HandleTypeDef *pdev, uint8_t epnum); + +USBD_StatusTypeDef USBD_LL_DevConnected(USBD_HandleTypeDef *pdev); +USBD_StatusTypeDef USBD_LL_DevDisconnected(USBD_HandleTypeDef *pdev); + +/* USBD Low Level Driver */ +USBD_StatusTypeDef USBD_LL_Init (USBD_HandleTypeDef *pdev); +USBD_StatusTypeDef USBD_LL_DeInit (USBD_HandleTypeDef *pdev); +USBD_StatusTypeDef USBD_LL_Start(USBD_HandleTypeDef *pdev); +USBD_StatusTypeDef USBD_LL_Stop (USBD_HandleTypeDef *pdev); +USBD_StatusTypeDef USBD_LL_OpenEP (USBD_HandleTypeDef *pdev, + uint8_t ep_addr, + uint8_t ep_type, + uint16_t ep_mps); + +USBD_StatusTypeDef USBD_LL_CloseEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr); +USBD_StatusTypeDef USBD_LL_FlushEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr); +USBD_StatusTypeDef USBD_LL_StallEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr); +USBD_StatusTypeDef USBD_LL_ClearStallEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr); +uint8_t USBD_LL_IsStallEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr); +USBD_StatusTypeDef USBD_LL_SetUSBAddress (USBD_HandleTypeDef *pdev, uint8_t dev_addr); +USBD_StatusTypeDef USBD_LL_Transmit (USBD_HandleTypeDef *pdev, + uint8_t ep_addr, + uint8_t *pbuf, + uint16_t size); + +USBD_StatusTypeDef USBD_LL_PrepareReceive(USBD_HandleTypeDef *pdev, + uint8_t ep_addr, + uint8_t *pbuf, + uint16_t size); + +uint32_t USBD_LL_GetRxDataSize (USBD_HandleTypeDef *pdev, uint8_t ep_addr); +void USBD_LL_Delay (uint32_t Delay); + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __USBD_CORE_H */ + +/** + * @} + */ + +/** +* @} +*/ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + + + diff --git a/src/boards/mcu/stm32/STM32_USB_Device_Library/Core/Inc/usbd_ctlreq.h b/src/boards/mcu/stm32/STM32_USB_Device_Library/Core/Inc/usbd_ctlreq.h new file mode 100755 index 0000000..66380fd --- /dev/null +++ b/src/boards/mcu/stm32/STM32_USB_Device_Library/Core/Inc/usbd_ctlreq.h @@ -0,0 +1,113 @@ +/** + ****************************************************************************** + * @file usbd_req.h + * @author MCD Application Team + * @version V2.4.2 + * @date 11-December-2015 + * @brief Header file for the usbd_req.c file + ****************************************************************************** + * @attention + * + *

© COPYRIGHT 2015 STMicroelectronics

+ * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __USB_REQUEST_H +#define __USB_REQUEST_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "usbd_def.h" + + +/** @addtogroup STM32_USB_DEVICE_LIBRARY + * @{ + */ + +/** @defgroup USBD_REQ + * @brief header file for the usbd_req.c file + * @{ + */ + +/** @defgroup USBD_REQ_Exported_Defines + * @{ + */ +/** + * @} + */ + + +/** @defgroup USBD_REQ_Exported_Types + * @{ + */ +/** + * @} + */ + + + +/** @defgroup USBD_REQ_Exported_Macros + * @{ + */ +/** + * @} + */ + +/** @defgroup USBD_REQ_Exported_Variables + * @{ + */ +/** + * @} + */ + +/** @defgroup USBD_REQ_Exported_FunctionsPrototype + * @{ + */ + +USBD_StatusTypeDef USBD_StdDevReq (USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req); +USBD_StatusTypeDef USBD_StdItfReq (USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req); +USBD_StatusTypeDef USBD_StdEPReq (USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req); + + +void USBD_CtlError (USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req); + +void USBD_ParseSetupRequest (USBD_SetupReqTypedef *req, uint8_t *pdata); + +void USBD_GetString (uint8_t *desc, uint8_t *unicode, uint16_t *len); +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __USB_REQUEST_H */ + +/** + * @} + */ + +/** +* @} +*/ + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32_USB_Device_Library/Core/Inc/usbd_def.h b/src/boards/mcu/stm32/STM32_USB_Device_Library/Core/Inc/usbd_def.h new file mode 100755 index 0000000..1c5256c --- /dev/null +++ b/src/boards/mcu/stm32/STM32_USB_Device_Library/Core/Inc/usbd_def.h @@ -0,0 +1,333 @@ +/** + ****************************************************************************** + * @file usbd_def.h + * @author MCD Application Team + * @version V2.4.2 + * @date 11-December-2015 + * @brief General defines for the usb device library + ****************************************************************************** + * @attention + * + *

© COPYRIGHT 2015 STMicroelectronics

+ * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __USBD_DEF_H +#define __USBD_DEF_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "usbd_conf.h" + +/** @addtogroup STM32_USBD_DEVICE_LIBRARY + * @{ + */ + +/** @defgroup USB_DEF + * @brief general defines for the usb device library file + * @{ + */ + +/** @defgroup USB_DEF_Exported_Defines + * @{ + */ + +#ifndef NULL +#define NULL 0 +#endif + + +#define USB_LEN_DEV_QUALIFIER_DESC 0x0A +#define USB_LEN_DEV_DESC 0x12 +#define USB_LEN_CFG_DESC 0x09 +#define USB_LEN_IF_DESC 0x09 +#define USB_LEN_EP_DESC 0x07 +#define USB_LEN_OTG_DESC 0x03 +#define USB_LEN_LANGID_STR_DESC 0x04 +#define USB_LEN_OTHER_SPEED_DESC_SIZ 0x09 + +#define USBD_IDX_LANGID_STR 0x00 +#define USBD_IDX_MFC_STR 0x01 +#define USBD_IDX_PRODUCT_STR 0x02 +#define USBD_IDX_SERIAL_STR 0x03 +#define USBD_IDX_CONFIG_STR 0x04 +#define USBD_IDX_INTERFACE_STR 0x05 + +#define USB_REQ_TYPE_STANDARD 0x00 +#define USB_REQ_TYPE_CLASS 0x20 +#define USB_REQ_TYPE_VENDOR 0x40 +#define USB_REQ_TYPE_MASK 0x60 + +#define USB_REQ_RECIPIENT_DEVICE 0x00 +#define USB_REQ_RECIPIENT_INTERFACE 0x01 +#define USB_REQ_RECIPIENT_ENDPOINT 0x02 +#define USB_REQ_RECIPIENT_MASK 0x03 + +#define USB_REQ_GET_STATUS 0x00 +#define USB_REQ_CLEAR_FEATURE 0x01 +#define USB_REQ_SET_FEATURE 0x03 +#define USB_REQ_SET_ADDRESS 0x05 +#define USB_REQ_GET_DESCRIPTOR 0x06 +#define USB_REQ_SET_DESCRIPTOR 0x07 +#define USB_REQ_GET_CONFIGURATION 0x08 +#define USB_REQ_SET_CONFIGURATION 0x09 +#define USB_REQ_GET_INTERFACE 0x0A +#define USB_REQ_SET_INTERFACE 0x0B +#define USB_REQ_SYNCH_FRAME 0x0C + +#define USB_DESC_TYPE_DEVICE 1 +#define USB_DESC_TYPE_CONFIGURATION 2 +#define USB_DESC_TYPE_STRING 3 +#define USB_DESC_TYPE_INTERFACE 4 +#define USB_DESC_TYPE_ENDPOINT 5 +#define USB_DESC_TYPE_DEVICE_QUALIFIER 6 +#define USB_DESC_TYPE_OTHER_SPEED_CONFIGURATION 7 +#define USB_DESC_TYPE_BOS 0x0F + +#define USB_CONFIG_REMOTE_WAKEUP 2 +#define USB_CONFIG_SELF_POWERED 1 + +#define USB_FEATURE_EP_HALT 0 +#define USB_FEATURE_REMOTE_WAKEUP 1 +#define USB_FEATURE_TEST_MODE 2 + +#define USB_DEVICE_CAPABITY_TYPE 0x10 + +#define USB_HS_MAX_PACKET_SIZE 512 +#define USB_FS_MAX_PACKET_SIZE 64 +#define USB_MAX_EP0_SIZE 64 + +/* Device Status */ +#define USBD_STATE_DEFAULT 1 +#define USBD_STATE_ADDRESSED 2 +#define USBD_STATE_CONFIGURED 3 +#define USBD_STATE_SUSPENDED 4 + + +/* EP0 State */ +#define USBD_EP0_IDLE 0 +#define USBD_EP0_SETUP 1 +#define USBD_EP0_DATA_IN 2 +#define USBD_EP0_DATA_OUT 3 +#define USBD_EP0_STATUS_IN 4 +#define USBD_EP0_STATUS_OUT 5 +#define USBD_EP0_STALL 6 + +#define USBD_EP_TYPE_CTRL 0 +#define USBD_EP_TYPE_ISOC 1 +#define USBD_EP_TYPE_BULK 2 +#define USBD_EP_TYPE_INTR 3 + + +/** + * @} + */ + + +/** @defgroup USBD_DEF_Exported_TypesDefinitions + * @{ + */ + +typedef struct usb_setup_req +{ + + uint8_t bmRequest; + uint8_t bRequest; + uint16_t wValue; + uint16_t wIndex; + uint16_t wLength; +}USBD_SetupReqTypedef; + +struct _USBD_HandleTypeDef; + +typedef struct _Device_cb +{ + uint8_t (*Init) (struct _USBD_HandleTypeDef *pdev , uint8_t cfgidx); + uint8_t (*DeInit) (struct _USBD_HandleTypeDef *pdev , uint8_t cfgidx); + /* Control Endpoints*/ + uint8_t (*Setup) (struct _USBD_HandleTypeDef *pdev , USBD_SetupReqTypedef *req); + uint8_t (*EP0_TxSent) (struct _USBD_HandleTypeDef *pdev ); + uint8_t (*EP0_RxReady) (struct _USBD_HandleTypeDef *pdev ); + /* Class Specific Endpoints*/ + uint8_t (*DataIn) (struct _USBD_HandleTypeDef *pdev , uint8_t epnum); + uint8_t (*DataOut) (struct _USBD_HandleTypeDef *pdev , uint8_t epnum); + uint8_t (*SOF) (struct _USBD_HandleTypeDef *pdev); + uint8_t (*IsoINIncomplete) (struct _USBD_HandleTypeDef *pdev , uint8_t epnum); + uint8_t (*IsoOUTIncomplete) (struct _USBD_HandleTypeDef *pdev , uint8_t epnum); + + uint8_t *(*GetHSConfigDescriptor)(uint16_t *length); + uint8_t *(*GetFSConfigDescriptor)(uint16_t *length); + uint8_t *(*GetOtherSpeedConfigDescriptor)(uint16_t *length); + uint8_t *(*GetDeviceQualifierDescriptor)(uint16_t *length); +#if (USBD_SUPPORT_USER_STRING == 1) + uint8_t *(*GetUsrStrDescriptor)(struct _USBD_HandleTypeDef *pdev ,uint8_t index, uint16_t *length); +#endif + +} USBD_ClassTypeDef; + +/* Following USB Device Speed */ +typedef enum +{ + USBD_SPEED_HIGH = 0, + USBD_SPEED_FULL = 1, + USBD_SPEED_LOW = 2, +}USBD_SpeedTypeDef; + +/* Following USB Device status */ +typedef enum { + USBD_OK = 0, + USBD_BUSY, + USBD_FAIL, +}USBD_StatusTypeDef; + +/* USB Device descriptors structure */ +typedef struct +{ + uint8_t *(*GetDeviceDescriptor)( USBD_SpeedTypeDef speed , uint16_t *length); + uint8_t *(*GetLangIDStrDescriptor)( USBD_SpeedTypeDef speed , uint16_t *length); + uint8_t *(*GetManufacturerStrDescriptor)( USBD_SpeedTypeDef speed , uint16_t *length); + uint8_t *(*GetProductStrDescriptor)( USBD_SpeedTypeDef speed , uint16_t *length); + uint8_t *(*GetSerialStrDescriptor)( USBD_SpeedTypeDef speed , uint16_t *length); + uint8_t *(*GetConfigurationStrDescriptor)( USBD_SpeedTypeDef speed , uint16_t *length); + uint8_t *(*GetInterfaceStrDescriptor)( USBD_SpeedTypeDef speed , uint16_t *length); +#if (USBD_LPM_ENABLED == 1) + uint8_t *(*GetBOSDescriptor)( USBD_SpeedTypeDef speed , uint16_t *length); +#endif +} USBD_DescriptorsTypeDef; + +/* USB Device handle structure */ +typedef struct +{ + uint32_t status; + uint32_t total_length; + uint32_t rem_length; + uint32_t maxpacket; +} USBD_EndpointTypeDef; + +/* USB Device handle structure */ +typedef struct _USBD_HandleTypeDef +{ + uint8_t id; + uint32_t dev_config; + uint32_t dev_default_config; + uint32_t dev_config_status; + USBD_SpeedTypeDef dev_speed; + USBD_EndpointTypeDef ep_in[15]; + USBD_EndpointTypeDef ep_out[15]; + uint32_t ep0_state; + uint32_t ep0_data_len; + uint8_t dev_state; + uint8_t dev_old_state; + uint8_t dev_address; + uint8_t dev_connection_status; + uint8_t dev_test_mode; + uint32_t dev_remote_wakeup; + + USBD_SetupReqTypedef request; + USBD_DescriptorsTypeDef *pDesc; + USBD_ClassTypeDef *pClass; + void *pClassData; + void *pUserData; + void *pData; +} USBD_HandleTypeDef; + +/** + * @} + */ + + + +/** @defgroup USBD_DEF_Exported_Macros + * @{ + */ +#define SWAPBYTE(addr) (((uint16_t)(*((uint8_t *)(addr)))) + \ + (((uint16_t)(*(((uint8_t *)(addr)) + 1))) << 8)) + +#define LOBYTE(x) ((uint8_t)(x & 0x00FF)) +#define HIBYTE(x) ((uint8_t)((x & 0xFF00) >>8)) +#ifndef MIN +#define MIN(a, b) (((a) < (b)) ? (a) : (b)) +#endif +#ifndef MAX +#define MAX(a, b) (((a) > (b)) ? (a) : (b)) +#endif + +#if defined ( __GNUC__ ) + #ifndef __weak + #define __weak __attribute__((weak)) + #endif /* __weak */ + #ifndef __packed + #define __packed __attribute__((__packed__)) + #endif /* __packed */ +#endif /* __GNUC__ */ + + +/* In HS mode and when the DMA is used, all variables and data structures dealing + with the DMA during the transaction process should be 4-bytes aligned */ + +#if defined (__GNUC__) /* GNU Compiler */ + #define __ALIGN_END __attribute__ ((aligned (4))) + #define __ALIGN_BEGIN +#else + #define __ALIGN_END + #if defined (__CC_ARM) /* ARM Compiler */ + #define __ALIGN_BEGIN __align(4) + #elif defined (__ICCARM__) /* IAR Compiler */ + #define __ALIGN_BEGIN + #elif defined (__TASKING__) /* TASKING Compiler */ + #define __ALIGN_BEGIN __align(4) + #endif /* __CC_ARM */ +#endif /* __GNUC__ */ + + +/** + * @} + */ + +/** @defgroup USBD_DEF_Exported_Variables + * @{ + */ + +/** + * @} + */ + +/** @defgroup USBD_DEF_Exported_FunctionsPrototype + * @{ + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __USBD_DEF_H */ + +/** + * @} + */ + +/** +* @} +*/ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32_USB_Device_Library/Core/Inc/usbd_ioreq.h b/src/boards/mcu/stm32/STM32_USB_Device_Library/Core/Inc/usbd_ioreq.h new file mode 100755 index 0000000..dbf8ca1 --- /dev/null +++ b/src/boards/mcu/stm32/STM32_USB_Device_Library/Core/Inc/usbd_ioreq.h @@ -0,0 +1,128 @@ +/** + ****************************************************************************** + * @file usbd_ioreq.h + * @author MCD Application Team + * @version V2.4.2 + * @date 11-December-2015 + * @brief Header file for the usbd_ioreq.c file + ****************************************************************************** + * @attention + * + *

© COPYRIGHT 2015 STMicroelectronics

+ * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __USBD_IOREQ_H +#define __USBD_IOREQ_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "usbd_def.h" +#include "usbd_core.h" + +/** @addtogroup STM32_USB_DEVICE_LIBRARY + * @{ + */ + +/** @defgroup USBD_IOREQ + * @brief header file for the usbd_ioreq.c file + * @{ + */ + +/** @defgroup USBD_IOREQ_Exported_Defines + * @{ + */ +/** + * @} + */ + + +/** @defgroup USBD_IOREQ_Exported_Types + * @{ + */ + + +/** + * @} + */ + + + +/** @defgroup USBD_IOREQ_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup USBD_IOREQ_Exported_Variables + * @{ + */ + +/** + * @} + */ + +/** @defgroup USBD_IOREQ_Exported_FunctionsPrototype + * @{ + */ + +USBD_StatusTypeDef USBD_CtlSendData (USBD_HandleTypeDef *pdev, + uint8_t *buf, + uint16_t len); + +USBD_StatusTypeDef USBD_CtlContinueSendData (USBD_HandleTypeDef *pdev, + uint8_t *pbuf, + uint16_t len); + +USBD_StatusTypeDef USBD_CtlPrepareRx (USBD_HandleTypeDef *pdev, + uint8_t *pbuf, + uint16_t len); + +USBD_StatusTypeDef USBD_CtlContinueRx (USBD_HandleTypeDef *pdev, + uint8_t *pbuf, + uint16_t len); + +USBD_StatusTypeDef USBD_CtlSendStatus (USBD_HandleTypeDef *pdev); + +USBD_StatusTypeDef USBD_CtlReceiveStatus (USBD_HandleTypeDef *pdev); + +uint16_t USBD_GetRxCount (USBD_HandleTypeDef *pdev , + uint8_t epnum); + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __USBD_IOREQ_H */ + +/** + * @} + */ + +/** +* @} +*/ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32_USB_Device_Library/Core/Src/usbd_core.c b/src/boards/mcu/stm32/STM32_USB_Device_Library/Core/Src/usbd_core.c new file mode 100755 index 0000000..86fc2de --- /dev/null +++ b/src/boards/mcu/stm32/STM32_USB_Device_Library/Core/Src/usbd_core.c @@ -0,0 +1,565 @@ +/** + ****************************************************************************** + * @file usbd_core.c + * @author MCD Application Team + * @version V2.4.2 + * @date 11-December-2015 + * @brief This file provides all the USBD core functions. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT 2015 STMicroelectronics

+ * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "usbd_core.h" + +/** @addtogroup STM32_USBD_DEVICE_LIBRARY +* @{ +*/ + + +/** @defgroup USBD_CORE +* @brief usbd core module +* @{ +*/ + +/** @defgroup USBD_CORE_Private_TypesDefinitions +* @{ +*/ +/** +* @} +*/ + + +/** @defgroup USBD_CORE_Private_Defines +* @{ +*/ + +/** +* @} +*/ + + +/** @defgroup USBD_CORE_Private_Macros +* @{ +*/ +/** +* @} +*/ + + + + +/** @defgroup USBD_CORE_Private_FunctionPrototypes +* @{ +*/ + +/** +* @} +*/ + +/** @defgroup USBD_CORE_Private_Variables +* @{ +*/ + +/** +* @} +*/ + +/** @defgroup USBD_CORE_Private_Functions +* @{ +*/ + +/** +* @brief USBD_Init +* Initializes the device stack and load the class driver +* @param pdev: device instance +* @param pdesc: Descriptor structure address +* @param id: Low level core index +* @retval None +*/ +USBD_StatusTypeDef USBD_Init(USBD_HandleTypeDef *pdev, USBD_DescriptorsTypeDef *pdesc, uint8_t id) +{ + /* Check whether the USB Host handle is valid */ + if(pdev == NULL) + { + USBD_ErrLog("Invalid Device handle"); + return USBD_FAIL; + } + + /* Unlink previous class*/ + if(pdev->pClass != NULL) + { + pdev->pClass = NULL; + } + + /* Assign USBD Descriptors */ + if(pdesc != NULL) + { + pdev->pDesc = pdesc; + } + + /* Set Device initial State */ + pdev->dev_state = USBD_STATE_DEFAULT; + pdev->id = id; + /* Initialize low level driver */ + USBD_LL_Init(pdev); + + return USBD_OK; +} + +/** +* @brief USBD_DeInit +* Re-Initialize th device library +* @param pdev: device instance +* @retval status: status +*/ +USBD_StatusTypeDef USBD_DeInit(USBD_HandleTypeDef *pdev) +{ + /* Set Default State */ + pdev->dev_state = USBD_STATE_DEFAULT; + + /* Free Class Resources */ + pdev->pClass->DeInit(pdev, pdev->dev_config); + + /* Stop the low level driver */ + USBD_LL_Stop(pdev); + + /* Initialize low level driver */ + USBD_LL_DeInit(pdev); + + return USBD_OK; +} + + +/** + * @brief USBD_RegisterClass + * Link class driver to Device Core. + * @param pDevice : Device Handle + * @param pclass: Class handle + * @retval USBD Status + */ +USBD_StatusTypeDef USBD_RegisterClass(USBD_HandleTypeDef *pdev, USBD_ClassTypeDef *pclass) +{ + USBD_StatusTypeDef status = USBD_OK; + if(pclass != 0) + { + /* link the class to the USB Device handle */ + pdev->pClass = pclass; + status = USBD_OK; + } + else + { + USBD_ErrLog("Invalid Class handle"); + status = USBD_FAIL; + } + + return status; +} + +/** + * @brief USBD_Start + * Start the USB Device Core. + * @param pdev: Device Handle + * @retval USBD Status + */ +USBD_StatusTypeDef USBD_Start (USBD_HandleTypeDef *pdev) +{ + + /* Start the low level driver */ + USBD_LL_Start(pdev); + + return USBD_OK; +} + +/** + * @brief USBD_Stop + * Stop the USB Device Core. + * @param pdev: Device Handle + * @retval USBD Status + */ +USBD_StatusTypeDef USBD_Stop (USBD_HandleTypeDef *pdev) +{ + /* Free Class Resources */ + pdev->pClass->DeInit(pdev, pdev->dev_config); + + /* Stop the low level driver */ + USBD_LL_Stop(pdev); + + return USBD_OK; +} + +/** +* @brief USBD_RunTestMode +* Launch test mode process +* @param pdev: device instance +* @retval status +*/ +USBD_StatusTypeDef USBD_RunTestMode (USBD_HandleTypeDef *pdev) +{ + return USBD_OK; +} + + +/** +* @brief USBD_SetClassConfig +* Configure device and start the interface +* @param pdev: device instance +* @param cfgidx: configuration index +* @retval status +*/ + +USBD_StatusTypeDef USBD_SetClassConfig(USBD_HandleTypeDef *pdev, uint8_t cfgidx) +{ + USBD_StatusTypeDef ret = USBD_FAIL; + + if(pdev->pClass != NULL) + { + /* Set configuration and Start the Class*/ + if(pdev->pClass->Init(pdev, cfgidx) == 0) + { + ret = USBD_OK; + } + } + return ret; +} + +/** +* @brief USBD_ClrClassConfig +* Clear current configuration +* @param pdev: device instance +* @param cfgidx: configuration index +* @retval status: USBD_StatusTypeDef +*/ +USBD_StatusTypeDef USBD_ClrClassConfig(USBD_HandleTypeDef *pdev, uint8_t cfgidx) +{ + /* Clear configuration and De-initialize the Class process*/ + pdev->pClass->DeInit(pdev, cfgidx); + return USBD_OK; +} + + +/** +* @brief USBD_SetupStage +* Handle the setup stage +* @param pdev: device instance +* @retval status +*/ +USBD_StatusTypeDef USBD_LL_SetupStage(USBD_HandleTypeDef *pdev, uint8_t *psetup) +{ + + USBD_ParseSetupRequest(&pdev->request, psetup); + + pdev->ep0_state = USBD_EP0_SETUP; + pdev->ep0_data_len = pdev->request.wLength; + + switch (pdev->request.bmRequest & 0x1F) + { + case USB_REQ_RECIPIENT_DEVICE: + USBD_StdDevReq (pdev, &pdev->request); + break; + + case USB_REQ_RECIPIENT_INTERFACE: + USBD_StdItfReq(pdev, &pdev->request); + break; + + case USB_REQ_RECIPIENT_ENDPOINT: + USBD_StdEPReq(pdev, &pdev->request); + break; + + default: + USBD_LL_StallEP(pdev , pdev->request.bmRequest & 0x80); + break; + } + return USBD_OK; +} + +/** +* @brief USBD_DataOutStage +* Handle data OUT stage +* @param pdev: device instance +* @param epnum: endpoint index +* @retval status +*/ +USBD_StatusTypeDef USBD_LL_DataOutStage(USBD_HandleTypeDef *pdev , uint8_t epnum, uint8_t *pdata) +{ + USBD_EndpointTypeDef *pep; + + if(epnum == 0) + { + pep = &pdev->ep_out[0]; + + if ( pdev->ep0_state == USBD_EP0_DATA_OUT) + { + if(pep->rem_length > pep->maxpacket) + { + pep->rem_length -= pep->maxpacket; + + USBD_CtlContinueRx (pdev, + pdata, + MIN(pep->rem_length ,pep->maxpacket)); + } + else + { + if((pdev->pClass->EP0_RxReady != NULL)&& + (pdev->dev_state == USBD_STATE_CONFIGURED)) + { + pdev->pClass->EP0_RxReady(pdev); + } + USBD_CtlSendStatus(pdev); + } + } + } + else if((pdev->pClass->DataOut != NULL)&& + (pdev->dev_state == USBD_STATE_CONFIGURED)) + { + pdev->pClass->DataOut(pdev, epnum); + } + return USBD_OK; +} + +/** +* @brief USBD_DataInStage +* Handle data in stage +* @param pdev: device instance +* @param epnum: endpoint index +* @retval status +*/ +USBD_StatusTypeDef USBD_LL_DataInStage(USBD_HandleTypeDef *pdev ,uint8_t epnum, uint8_t *pdata) +{ + USBD_EndpointTypeDef *pep; + + if(epnum == 0) + { + pep = &pdev->ep_in[0]; + + if ( pdev->ep0_state == USBD_EP0_DATA_IN) + { + if(pep->rem_length > pep->maxpacket) + { + pep->rem_length -= pep->maxpacket; + + USBD_CtlContinueSendData (pdev, + pdata, + pep->rem_length); + + /* Prepare endpoint for premature end of transfer */ + USBD_LL_PrepareReceive (pdev, + 0, + NULL, + 0); + } + else + { /* last packet is MPS multiple, so send ZLP packet */ + if((pep->total_length % pep->maxpacket == 0) && + (pep->total_length >= pep->maxpacket) && + (pep->total_length < pdev->ep0_data_len )) + { + + USBD_CtlContinueSendData(pdev , NULL, 0); + pdev->ep0_data_len = 0; + + /* Prepare endpoint for premature end of transfer */ + USBD_LL_PrepareReceive (pdev, + 0, + NULL, + 0); + } + else + { + if((pdev->pClass->EP0_TxSent != NULL)&& + (pdev->dev_state == USBD_STATE_CONFIGURED)) + { + pdev->pClass->EP0_TxSent(pdev); + } + USBD_CtlReceiveStatus(pdev); + } + } + } + if (pdev->dev_test_mode == 1) + { + USBD_RunTestMode(pdev); + pdev->dev_test_mode = 0; + } + } + else if((pdev->pClass->DataIn != NULL)&& + (pdev->dev_state == USBD_STATE_CONFIGURED)) + { + pdev->pClass->DataIn(pdev, epnum); + } + return USBD_OK; +} + +/** +* @brief USBD_LL_Reset +* Handle Reset event +* @param pdev: device instance +* @retval status +*/ + +USBD_StatusTypeDef USBD_LL_Reset(USBD_HandleTypeDef *pdev) +{ + /* Open EP0 OUT */ + USBD_LL_OpenEP(pdev, + 0x00, + USBD_EP_TYPE_CTRL, + USB_MAX_EP0_SIZE); + + pdev->ep_out[0].maxpacket = USB_MAX_EP0_SIZE; + + /* Open EP0 IN */ + USBD_LL_OpenEP(pdev, + 0x80, + USBD_EP_TYPE_CTRL, + USB_MAX_EP0_SIZE); + + pdev->ep_in[0].maxpacket = USB_MAX_EP0_SIZE; + /* Upon Reset call user call back */ + pdev->dev_state = USBD_STATE_DEFAULT; + + if (pdev->pClassData) + pdev->pClass->DeInit(pdev, pdev->dev_config); + + + return USBD_OK; +} + + + + +/** +* @brief USBD_LL_Reset +* Handle Reset event +* @param pdev: device instance +* @retval status +*/ +USBD_StatusTypeDef USBD_LL_SetSpeed(USBD_HandleTypeDef *pdev, USBD_SpeedTypeDef speed) +{ + pdev->dev_speed = speed; + return USBD_OK; +} + +/** +* @brief USBD_Suspend +* Handle Suspend event +* @param pdev: device instance +* @retval status +*/ + +USBD_StatusTypeDef USBD_LL_Suspend(USBD_HandleTypeDef *pdev) +{ + pdev->dev_old_state = pdev->dev_state; + pdev->dev_state = USBD_STATE_SUSPENDED; + return USBD_OK; +} + +/** +* @brief USBD_Resume +* Handle Resume event +* @param pdev: device instance +* @retval status +*/ + +USBD_StatusTypeDef USBD_LL_Resume(USBD_HandleTypeDef *pdev) +{ + pdev->dev_state = pdev->dev_old_state; + return USBD_OK; +} + +/** +* @brief USBD_SOF +* Handle SOF event +* @param pdev: device instance +* @retval status +*/ + +USBD_StatusTypeDef USBD_LL_SOF(USBD_HandleTypeDef *pdev) +{ + if(pdev->dev_state == USBD_STATE_CONFIGURED) + { + if(pdev->pClass->SOF != NULL) + { + pdev->pClass->SOF(pdev); + } + } + return USBD_OK; +} + +/** +* @brief USBD_IsoINIncomplete +* Handle iso in incomplete event +* @param pdev: device instance +* @retval status +*/ +USBD_StatusTypeDef USBD_LL_IsoINIncomplete(USBD_HandleTypeDef *pdev, uint8_t epnum) +{ + return USBD_OK; +} + +/** +* @brief USBD_IsoOUTIncomplete +* Handle iso out incomplete event +* @param pdev: device instance +* @retval status +*/ +USBD_StatusTypeDef USBD_LL_IsoOUTIncomplete(USBD_HandleTypeDef *pdev, uint8_t epnum) +{ + return USBD_OK; +} + +/** +* @brief USBD_DevConnected +* Handle device connection event +* @param pdev: device instance +* @retval status +*/ +USBD_StatusTypeDef USBD_LL_DevConnected(USBD_HandleTypeDef *pdev) +{ + return USBD_OK; +} + +/** +* @brief USBD_DevDisconnected +* Handle device disconnection event +* @param pdev: device instance +* @retval status +*/ +USBD_StatusTypeDef USBD_LL_DevDisconnected(USBD_HandleTypeDef *pdev) +{ + /* Free Class Resources */ + pdev->dev_state = USBD_STATE_DEFAULT; + pdev->pClass->DeInit(pdev, pdev->dev_config); + + return USBD_OK; +} +/** +* @} +*/ + + +/** +* @} +*/ + + +/** +* @} +*/ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/src/boards/mcu/stm32/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.c b/src/boards/mcu/stm32/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.c new file mode 100755 index 0000000..7701a6d --- /dev/null +++ b/src/boards/mcu/stm32/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.c @@ -0,0 +1,782 @@ +/** + ****************************************************************************** + * @file usbd_req.c + * @author MCD Application Team + * @version V2.4.2 + * @date 11-December-2015 + * @brief This file provides the standard USB requests following chapter 9. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT 2015 STMicroelectronics

+ * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "usbd_ctlreq.h" +#include "usbd_ioreq.h" + + +/** @addtogroup STM32_USBD_STATE_DEVICE_LIBRARY + * @{ + */ + + +/** @defgroup USBD_REQ + * @brief USB standard requests module + * @{ + */ + +/** @defgroup USBD_REQ_Private_TypesDefinitions + * @{ + */ +/** + * @} + */ + + +/** @defgroup USBD_REQ_Private_Defines + * @{ + */ + +/** + * @} + */ + + +/** @defgroup USBD_REQ_Private_Macros + * @{ + */ +/** + * @} + */ + + +/** @defgroup USBD_REQ_Private_Variables + * @{ + */ +/** + * @} + */ + + +/** @defgroup USBD_REQ_Private_FunctionPrototypes + * @{ + */ +static void USBD_GetDescriptor(USBD_HandleTypeDef *pdev , + USBD_SetupReqTypedef *req); + +static void USBD_SetAddress(USBD_HandleTypeDef *pdev , + USBD_SetupReqTypedef *req); + +static void USBD_SetConfig(USBD_HandleTypeDef *pdev , + USBD_SetupReqTypedef *req); + +static void USBD_GetConfig(USBD_HandleTypeDef *pdev , + USBD_SetupReqTypedef *req); + +static void USBD_GetStatus(USBD_HandleTypeDef *pdev , + USBD_SetupReqTypedef *req); + +static void USBD_SetFeature(USBD_HandleTypeDef *pdev , + USBD_SetupReqTypedef *req); + +static void USBD_ClrFeature(USBD_HandleTypeDef *pdev , + USBD_SetupReqTypedef *req); + +static uint8_t USBD_GetLen(uint8_t *buf); + +/** + * @} + */ + + +/** @defgroup USBD_REQ_Private_Functions + * @{ + */ + + +/** +* @brief USBD_StdDevReq +* Handle standard usb device requests +* @param pdev: device instance +* @param req: usb request +* @retval status +*/ +USBD_StatusTypeDef USBD_StdDevReq (USBD_HandleTypeDef *pdev , USBD_SetupReqTypedef *req) +{ + USBD_StatusTypeDef ret = USBD_OK; + + switch (req->bRequest) + { + case USB_REQ_GET_DESCRIPTOR: + + USBD_GetDescriptor (pdev, req) ; + break; + + case USB_REQ_SET_ADDRESS: + USBD_SetAddress(pdev, req); + break; + + case USB_REQ_SET_CONFIGURATION: + USBD_SetConfig (pdev , req); + break; + + case USB_REQ_GET_CONFIGURATION: + USBD_GetConfig (pdev , req); + break; + + case USB_REQ_GET_STATUS: + USBD_GetStatus (pdev , req); + break; + + + case USB_REQ_SET_FEATURE: + USBD_SetFeature (pdev , req); + break; + + case USB_REQ_CLEAR_FEATURE: + USBD_ClrFeature (pdev , req); + break; + + default: + USBD_CtlError(pdev , req); + break; + } + + return ret; +} + +/** +* @brief USBD_StdItfReq +* Handle standard usb interface requests +* @param pdev: device instance +* @param req: usb request +* @retval status +*/ +USBD_StatusTypeDef USBD_StdItfReq (USBD_HandleTypeDef *pdev , USBD_SetupReqTypedef *req) +{ + USBD_StatusTypeDef ret = USBD_OK; + + switch (pdev->dev_state) + { + case USBD_STATE_CONFIGURED: + + if (LOBYTE(req->wIndex) <= USBD_MAX_NUM_INTERFACES) + { + pdev->pClass->Setup (pdev, req); + + if((req->wLength == 0)&& (ret == USBD_OK)) + { + USBD_CtlSendStatus(pdev); + } + } + else + { + USBD_CtlError(pdev , req); + } + break; + + default: + USBD_CtlError(pdev , req); + break; + } + return USBD_OK; +} + +/** +* @brief USBD_StdEPReq +* Handle standard usb endpoint requests +* @param pdev: device instance +* @param req: usb request +* @retval status +*/ +USBD_StatusTypeDef USBD_StdEPReq (USBD_HandleTypeDef *pdev , USBD_SetupReqTypedef *req) +{ + + uint8_t ep_addr; + USBD_StatusTypeDef ret = USBD_OK; + USBD_EndpointTypeDef *pep; + ep_addr = LOBYTE(req->wIndex); + + /* Check if it is a class request */ + if ((req->bmRequest & 0x60) == 0x20) + { + pdev->pClass->Setup (pdev, req); + + return USBD_OK; + } + + switch (req->bRequest) + { + + case USB_REQ_SET_FEATURE : + + switch (pdev->dev_state) + { + case USBD_STATE_ADDRESSED: + if ((ep_addr != 0x00) && (ep_addr != 0x80)) + { + USBD_LL_StallEP(pdev , ep_addr); + } + break; + + case USBD_STATE_CONFIGURED: + if (req->wValue == USB_FEATURE_EP_HALT) + { + if ((ep_addr != 0x00) && (ep_addr != 0x80)) + { + USBD_LL_StallEP(pdev , ep_addr); + + } + } + pdev->pClass->Setup (pdev, req); + USBD_CtlSendStatus(pdev); + + break; + + default: + USBD_CtlError(pdev , req); + break; + } + break; + + case USB_REQ_CLEAR_FEATURE : + + switch (pdev->dev_state) + { + case USBD_STATE_ADDRESSED: + if ((ep_addr != 0x00) && (ep_addr != 0x80)) + { + USBD_LL_StallEP(pdev , ep_addr); + } + break; + + case USBD_STATE_CONFIGURED: + if (req->wValue == USB_FEATURE_EP_HALT) + { + if ((ep_addr & 0x7F) != 0x00) + { + USBD_LL_ClearStallEP(pdev , ep_addr); + pdev->pClass->Setup (pdev, req); + } + USBD_CtlSendStatus(pdev); + } + break; + + default: + USBD_CtlError(pdev , req); + break; + } + break; + + case USB_REQ_GET_STATUS: + switch (pdev->dev_state) + { + case USBD_STATE_ADDRESSED: + if ((ep_addr & 0x7F) != 0x00) + { + USBD_LL_StallEP(pdev , ep_addr); + } + break; + + case USBD_STATE_CONFIGURED: + pep = ((ep_addr & 0x80) == 0x80) ? &pdev->ep_in[ep_addr & 0x7F]:\ + &pdev->ep_out[ep_addr & 0x7F]; + if(USBD_LL_IsStallEP(pdev, ep_addr)) + { + pep->status = 0x0001; + } + else + { + pep->status = 0x0000; + } + + USBD_CtlSendData (pdev, + (uint8_t *)&pep->status, + 2); + break; + + default: + USBD_CtlError(pdev , req); + break; + } + break; + + default: + break; + } + return ret; +} +/** +* @brief USBD_GetDescriptor +* Handle Get Descriptor requests +* @param pdev: device instance +* @param req: usb request +* @retval status +*/ +static void USBD_GetDescriptor(USBD_HandleTypeDef *pdev , + USBD_SetupReqTypedef *req) +{ + uint16_t len; + uint8_t *pbuf; + + + switch (req->wValue >> 8) + { +#if (USBD_LPM_ENABLED == 1) + case USB_DESC_TYPE_BOS: + pbuf = pdev->pDesc->GetBOSDescriptor(pdev->dev_speed, &len); + break; +#endif + case USB_DESC_TYPE_DEVICE: + pbuf = pdev->pDesc->GetDeviceDescriptor(pdev->dev_speed, &len); + break; + + case USB_DESC_TYPE_CONFIGURATION: + if(pdev->dev_speed == USBD_SPEED_HIGH ) + { + pbuf = (uint8_t *)pdev->pClass->GetHSConfigDescriptor(&len); + pbuf[1] = USB_DESC_TYPE_CONFIGURATION; + } + else + { + pbuf = (uint8_t *)pdev->pClass->GetFSConfigDescriptor(&len); + pbuf[1] = USB_DESC_TYPE_CONFIGURATION; + } + break; + + case USB_DESC_TYPE_STRING: + switch ((uint8_t)(req->wValue)) + { + case USBD_IDX_LANGID_STR: + pbuf = pdev->pDesc->GetLangIDStrDescriptor(pdev->dev_speed, &len); + break; + + case USBD_IDX_MFC_STR: + pbuf = pdev->pDesc->GetManufacturerStrDescriptor(pdev->dev_speed, &len); + break; + + case USBD_IDX_PRODUCT_STR: + pbuf = pdev->pDesc->GetProductStrDescriptor(pdev->dev_speed, &len); + break; + + case USBD_IDX_SERIAL_STR: + pbuf = pdev->pDesc->GetSerialStrDescriptor(pdev->dev_speed, &len); + break; + + case USBD_IDX_CONFIG_STR: + pbuf = pdev->pDesc->GetConfigurationStrDescriptor(pdev->dev_speed, &len); + break; + + case USBD_IDX_INTERFACE_STR: + pbuf = pdev->pDesc->GetInterfaceStrDescriptor(pdev->dev_speed, &len); + break; + + default: +#if (USBD_SUPPORT_USER_STRING == 1) + pbuf = pdev->pClass->GetUsrStrDescriptor(pdev, (req->wValue) , &len); + break; +#else + USBD_CtlError(pdev , req); + return; +#endif + } + break; + case USB_DESC_TYPE_DEVICE_QUALIFIER: + + if(pdev->dev_speed == USBD_SPEED_HIGH ) + { + pbuf = (uint8_t *)pdev->pClass->GetDeviceQualifierDescriptor(&len); + break; + } + else + { + USBD_CtlError(pdev , req); + return; + } + + case USB_DESC_TYPE_OTHER_SPEED_CONFIGURATION: + if(pdev->dev_speed == USBD_SPEED_HIGH ) + { + pbuf = (uint8_t *)pdev->pClass->GetOtherSpeedConfigDescriptor(&len); + pbuf[1] = USB_DESC_TYPE_OTHER_SPEED_CONFIGURATION; + break; + } + else + { + USBD_CtlError(pdev , req); + return; + } + + default: + USBD_CtlError(pdev , req); + return; + } + + if((len != 0)&& (req->wLength != 0)) + { + + len = MIN(len , req->wLength); + + USBD_CtlSendData (pdev, + pbuf, + len); + } + +} + +/** +* @brief USBD_SetAddress +* Set device address +* @param pdev: device instance +* @param req: usb request +* @retval status +*/ +static void USBD_SetAddress(USBD_HandleTypeDef *pdev , + USBD_SetupReqTypedef *req) +{ + uint8_t dev_addr; + + if ((req->wIndex == 0) && (req->wLength == 0)) + { + dev_addr = (uint8_t)(req->wValue) & 0x7F; + + if (pdev->dev_state == USBD_STATE_CONFIGURED) + { + USBD_CtlError(pdev , req); + } + else + { + pdev->dev_address = dev_addr; + USBD_LL_SetUSBAddress(pdev, dev_addr); + USBD_CtlSendStatus(pdev); + + if (dev_addr != 0) + { + pdev->dev_state = USBD_STATE_ADDRESSED; + } + else + { + pdev->dev_state = USBD_STATE_DEFAULT; + } + } + } + else + { + USBD_CtlError(pdev , req); + } +} + +/** +* @brief USBD_SetConfig +* Handle Set device configuration request +* @param pdev: device instance +* @param req: usb request +* @retval status +*/ +static void USBD_SetConfig(USBD_HandleTypeDef *pdev , + USBD_SetupReqTypedef *req) +{ + + static uint8_t cfgidx; + + cfgidx = (uint8_t)(req->wValue); + + if (cfgidx > USBD_MAX_NUM_CONFIGURATION ) + { + USBD_CtlError(pdev , req); + } + else + { + switch (pdev->dev_state) + { + case USBD_STATE_ADDRESSED: + if (cfgidx) + { + pdev->dev_config = cfgidx; + pdev->dev_state = USBD_STATE_CONFIGURED; + if(USBD_SetClassConfig(pdev , cfgidx) == USBD_FAIL) + { + USBD_CtlError(pdev , req); + return; + } + USBD_CtlSendStatus(pdev); + } + else + { + USBD_CtlSendStatus(pdev); + } + break; + + case USBD_STATE_CONFIGURED: + if (cfgidx == 0) + { + pdev->dev_state = USBD_STATE_ADDRESSED; + pdev->dev_config = cfgidx; + USBD_ClrClassConfig(pdev , cfgidx); + USBD_CtlSendStatus(pdev); + + } + else if (cfgidx != pdev->dev_config) + { + /* Clear old configuration */ + USBD_ClrClassConfig(pdev , pdev->dev_config); + + /* set new configuration */ + pdev->dev_config = cfgidx; + if(USBD_SetClassConfig(pdev , cfgidx) == USBD_FAIL) + { + USBD_CtlError(pdev , req); + return; + } + USBD_CtlSendStatus(pdev); + } + else + { + USBD_CtlSendStatus(pdev); + } + break; + + default: + USBD_CtlError(pdev , req); + break; + } + } +} + +/** +* @brief USBD_GetConfig +* Handle Get device configuration request +* @param pdev: device instance +* @param req: usb request +* @retval status +*/ +static void USBD_GetConfig(USBD_HandleTypeDef *pdev , + USBD_SetupReqTypedef *req) +{ + + if (req->wLength != 1) + { + USBD_CtlError(pdev , req); + } + else + { + switch (pdev->dev_state ) + { + case USBD_STATE_ADDRESSED: + pdev->dev_default_config = 0; + USBD_CtlSendData (pdev, + (uint8_t *)&pdev->dev_default_config, + 1); + break; + + case USBD_STATE_CONFIGURED: + + USBD_CtlSendData (pdev, + (uint8_t *)&pdev->dev_config, + 1); + break; + + default: + USBD_CtlError(pdev , req); + break; + } + } +} + +/** +* @brief USBD_GetStatus +* Handle Get Status request +* @param pdev: device instance +* @param req: usb request +* @retval status +*/ +static void USBD_GetStatus(USBD_HandleTypeDef *pdev , + USBD_SetupReqTypedef *req) +{ + + + switch (pdev->dev_state) + { + case USBD_STATE_ADDRESSED: + case USBD_STATE_CONFIGURED: + +#if ( USBD_SELF_POWERED == 1) + pdev->dev_config_status = USB_CONFIG_SELF_POWERED; +#else + pdev->dev_config_status = 0; +#endif + + if (pdev->dev_remote_wakeup) + { + pdev->dev_config_status |= USB_CONFIG_REMOTE_WAKEUP; + } + + USBD_CtlSendData (pdev, + (uint8_t *)& pdev->dev_config_status, + 2); + break; + + default : + USBD_CtlError(pdev , req); + break; + } +} + + +/** +* @brief USBD_SetFeature +* Handle Set device feature request +* @param pdev: device instance +* @param req: usb request +* @retval status +*/ +static void USBD_SetFeature(USBD_HandleTypeDef *pdev , + USBD_SetupReqTypedef *req) +{ + + if (req->wValue == USB_FEATURE_REMOTE_WAKEUP) + { + pdev->dev_remote_wakeup = 1; + pdev->pClass->Setup (pdev, req); + USBD_CtlSendStatus(pdev); + } + +} + + +/** +* @brief USBD_ClrFeature +* Handle clear device feature request +* @param pdev: device instance +* @param req: usb request +* @retval status +*/ +static void USBD_ClrFeature(USBD_HandleTypeDef *pdev , + USBD_SetupReqTypedef *req) +{ + switch (pdev->dev_state) + { + case USBD_STATE_ADDRESSED: + case USBD_STATE_CONFIGURED: + if (req->wValue == USB_FEATURE_REMOTE_WAKEUP) + { + pdev->dev_remote_wakeup = 0; + pdev->pClass->Setup (pdev, req); + USBD_CtlSendStatus(pdev); + } + break; + + default : + USBD_CtlError(pdev , req); + break; + } +} + +/** +* @brief USBD_ParseSetupRequest +* Copy buffer into setup structure +* @param pdev: device instance +* @param req: usb request +* @retval None +*/ + +void USBD_ParseSetupRequest(USBD_SetupReqTypedef *req, uint8_t *pdata) +{ + req->bmRequest = *(uint8_t *) (pdata); + req->bRequest = *(uint8_t *) (pdata + 1); + req->wValue = SWAPBYTE (pdata + 2); + req->wIndex = SWAPBYTE (pdata + 4); + req->wLength = SWAPBYTE (pdata + 6); + +} + +/** +* @brief USBD_CtlError +* Handle USB low level Error +* @param pdev: device instance +* @param req: usb request +* @retval None +*/ + +void USBD_CtlError( USBD_HandleTypeDef *pdev , + USBD_SetupReqTypedef *req) +{ + USBD_LL_StallEP(pdev , 0x80); + USBD_LL_StallEP(pdev , 0); +} + + +/** + * @brief USBD_GetString + * Convert Ascii string into unicode one + * @param desc : descriptor buffer + * @param unicode : Formatted string buffer (unicode) + * @param len : descriptor length + * @retval None + */ +void USBD_GetString(uint8_t *desc, uint8_t *unicode, uint16_t *len) +{ + uint8_t idx = 0; + + if (desc != NULL) + { + *len = USBD_GetLen(desc) * 2 + 2; + unicode[idx++] = *len; + unicode[idx++] = USB_DESC_TYPE_STRING; + + while (*desc != '\0') + { + unicode[idx++] = *desc++; + unicode[idx++] = 0x00; + } + } +} + +/** + * @brief USBD_GetLen + * return the string length + * @param buf : pointer to the ascii string buffer + * @retval string length + */ +static uint8_t USBD_GetLen(uint8_t *buf) +{ + uint8_t len = 0; + + while (*buf != '\0') + { + len++; + buf++; + } + + return len; +} +/** + * @} + */ + + +/** + * @} + */ + + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/STM32_USB_Device_Library/Core/Src/usbd_ioreq.c b/src/boards/mcu/stm32/STM32_USB_Device_Library/Core/Src/usbd_ioreq.c new file mode 100755 index 0000000..d66d777 --- /dev/null +++ b/src/boards/mcu/stm32/STM32_USB_Device_Library/Core/Src/usbd_ioreq.c @@ -0,0 +1,236 @@ +/** + ****************************************************************************** + * @file usbd_ioreq.c + * @author MCD Application Team + * @version V2.4.2 + * @date 11-December-2015 + * @brief This file provides the IO requests APIs for control endpoints. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT 2015 STMicroelectronics

+ * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "usbd_ioreq.h" + +/** @addtogroup STM32_USB_DEVICE_LIBRARY + * @{ + */ + + +/** @defgroup USBD_IOREQ + * @brief control I/O requests module + * @{ + */ + +/** @defgroup USBD_IOREQ_Private_TypesDefinitions + * @{ + */ +/** + * @} + */ + + +/** @defgroup USBD_IOREQ_Private_Defines + * @{ + */ + +/** + * @} + */ + + +/** @defgroup USBD_IOREQ_Private_Macros + * @{ + */ +/** + * @} + */ + + +/** @defgroup USBD_IOREQ_Private_Variables + * @{ + */ + +/** + * @} + */ + + +/** @defgroup USBD_IOREQ_Private_FunctionPrototypes + * @{ + */ +/** + * @} + */ + + +/** @defgroup USBD_IOREQ_Private_Functions + * @{ + */ + +/** +* @brief USBD_CtlSendData +* send data on the ctl pipe +* @param pdev: device instance +* @param buff: pointer to data buffer +* @param len: length of data to be sent +* @retval status +*/ +USBD_StatusTypeDef USBD_CtlSendData (USBD_HandleTypeDef *pdev, + uint8_t *pbuf, + uint16_t len) +{ + /* Set EP0 State */ + pdev->ep0_state = USBD_EP0_DATA_IN; + pdev->ep_in[0].total_length = len; + pdev->ep_in[0].rem_length = len; + /* Start the transfer */ + USBD_LL_Transmit (pdev, 0x00, pbuf, len); + + return USBD_OK; +} + +/** +* @brief USBD_CtlContinueSendData +* continue sending data on the ctl pipe +* @param pdev: device instance +* @param buff: pointer to data buffer +* @param len: length of data to be sent +* @retval status +*/ +USBD_StatusTypeDef USBD_CtlContinueSendData (USBD_HandleTypeDef *pdev, + uint8_t *pbuf, + uint16_t len) +{ + /* Start the next transfer */ + USBD_LL_Transmit (pdev, 0x00, pbuf, len); + + return USBD_OK; +} + +/** +* @brief USBD_CtlPrepareRx +* receive data on the ctl pipe +* @param pdev: device instance +* @param buff: pointer to data buffer +* @param len: length of data to be received +* @retval status +*/ +USBD_StatusTypeDef USBD_CtlPrepareRx (USBD_HandleTypeDef *pdev, + uint8_t *pbuf, + uint16_t len) +{ + /* Set EP0 State */ + pdev->ep0_state = USBD_EP0_DATA_OUT; + pdev->ep_out[0].total_length = len; + pdev->ep_out[0].rem_length = len; + /* Start the transfer */ + USBD_LL_PrepareReceive (pdev, + 0, + pbuf, + len); + + return USBD_OK; +} + +/** +* @brief USBD_CtlContinueRx +* continue receive data on the ctl pipe +* @param pdev: device instance +* @param buff: pointer to data buffer +* @param len: length of data to be received +* @retval status +*/ +USBD_StatusTypeDef USBD_CtlContinueRx (USBD_HandleTypeDef *pdev, + uint8_t *pbuf, + uint16_t len) +{ + + USBD_LL_PrepareReceive (pdev, + 0, + pbuf, + len); + return USBD_OK; +} +/** +* @brief USBD_CtlSendStatus +* send zero lzngth packet on the ctl pipe +* @param pdev: device instance +* @retval status +*/ +USBD_StatusTypeDef USBD_CtlSendStatus (USBD_HandleTypeDef *pdev) +{ + + /* Set EP0 State */ + pdev->ep0_state = USBD_EP0_STATUS_IN; + + /* Start the transfer */ + USBD_LL_Transmit (pdev, 0x00, NULL, 0); + + return USBD_OK; +} + +/** +* @brief USBD_CtlReceiveStatus +* receive zero lzngth packet on the ctl pipe +* @param pdev: device instance +* @retval status +*/ +USBD_StatusTypeDef USBD_CtlReceiveStatus (USBD_HandleTypeDef *pdev) +{ + /* Set EP0 State */ + pdev->ep0_state = USBD_EP0_STATUS_OUT; + + /* Start the transfer */ + USBD_LL_PrepareReceive ( pdev, + 0, + NULL, + 0); + + return USBD_OK; +} + + +/** +* @brief USBD_GetRxCount +* returns the received data length +* @param pdev: device instance +* @param ep_addr: endpoint address +* @retval Rx Data blength +*/ +uint16_t USBD_GetRxCount (USBD_HandleTypeDef *pdev , uint8_t ep_addr) +{ + return USBD_LL_GetRxDataSize(pdev, ep_addr); +} + +/** + * @} + */ + + +/** + * @} + */ + + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/boards/mcu/stm32/cmsis/arm_common_tables.h b/src/boards/mcu/stm32/cmsis/arm_common_tables.h new file mode 100755 index 0000000..d5d7241 --- /dev/null +++ b/src/boards/mcu/stm32/cmsis/arm_common_tables.h @@ -0,0 +1,136 @@ +/* ---------------------------------------------------------------------- +* Copyright (C) 2010-2014 ARM Limited. All rights reserved. +* +* $Date: 19. October 2015 +* $Revision: V.1.4.5 a +* +* Project: CMSIS DSP Library +* Title: arm_common_tables.h +* +* Description: This file has extern declaration for common tables like Bitreverse, reciprocal etc which are used across different functions +* +* Target Processor: Cortex-M4/Cortex-M3 +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* - Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* - Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in +* the documentation and/or other materials provided with the +* distribution. +* - Neither the name of ARM LIMITED nor the names of its contributors +* may be used to endorse or promote products derived from this +* software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER +* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +* POSSIBILITY OF SUCH DAMAGE. +* -------------------------------------------------------------------- */ + +#ifndef _ARM_COMMON_TABLES_H +#define _ARM_COMMON_TABLES_H + +#include "arm_math.h" + +extern const uint16_t armBitRevTable[1024]; +extern const q15_t armRecipTableQ15[64]; +extern const q31_t armRecipTableQ31[64]; +/* extern const q31_t realCoefAQ31[1024]; */ +/* extern const q31_t realCoefBQ31[1024]; */ +extern const float32_t twiddleCoef_16[32]; +extern const float32_t twiddleCoef_32[64]; +extern const float32_t twiddleCoef_64[128]; +extern const float32_t twiddleCoef_128[256]; +extern const float32_t twiddleCoef_256[512]; +extern const float32_t twiddleCoef_512[1024]; +extern const float32_t twiddleCoef_1024[2048]; +extern const float32_t twiddleCoef_2048[4096]; +extern const float32_t twiddleCoef_4096[8192]; +#define twiddleCoef twiddleCoef_4096 +extern const q31_t twiddleCoef_16_q31[24]; +extern const q31_t twiddleCoef_32_q31[48]; +extern const q31_t twiddleCoef_64_q31[96]; +extern const q31_t twiddleCoef_128_q31[192]; +extern const q31_t twiddleCoef_256_q31[384]; +extern const q31_t twiddleCoef_512_q31[768]; +extern const q31_t twiddleCoef_1024_q31[1536]; +extern const q31_t twiddleCoef_2048_q31[3072]; +extern const q31_t twiddleCoef_4096_q31[6144]; +extern const q15_t twiddleCoef_16_q15[24]; +extern const q15_t twiddleCoef_32_q15[48]; +extern const q15_t twiddleCoef_64_q15[96]; +extern const q15_t twiddleCoef_128_q15[192]; +extern const q15_t twiddleCoef_256_q15[384]; +extern const q15_t twiddleCoef_512_q15[768]; +extern const q15_t twiddleCoef_1024_q15[1536]; +extern const q15_t twiddleCoef_2048_q15[3072]; +extern const q15_t twiddleCoef_4096_q15[6144]; +extern const float32_t twiddleCoef_rfft_32[32]; +extern const float32_t twiddleCoef_rfft_64[64]; +extern const float32_t twiddleCoef_rfft_128[128]; +extern const float32_t twiddleCoef_rfft_256[256]; +extern const float32_t twiddleCoef_rfft_512[512]; +extern const float32_t twiddleCoef_rfft_1024[1024]; +extern const float32_t twiddleCoef_rfft_2048[2048]; +extern const float32_t twiddleCoef_rfft_4096[4096]; + + +/* floating-point bit reversal tables */ +#define ARMBITREVINDEXTABLE__16_TABLE_LENGTH ((uint16_t)20 ) +#define ARMBITREVINDEXTABLE__32_TABLE_LENGTH ((uint16_t)48 ) +#define ARMBITREVINDEXTABLE__64_TABLE_LENGTH ((uint16_t)56 ) +#define ARMBITREVINDEXTABLE_128_TABLE_LENGTH ((uint16_t)208 ) +#define ARMBITREVINDEXTABLE_256_TABLE_LENGTH ((uint16_t)440 ) +#define ARMBITREVINDEXTABLE_512_TABLE_LENGTH ((uint16_t)448 ) +#define ARMBITREVINDEXTABLE1024_TABLE_LENGTH ((uint16_t)1800) +#define ARMBITREVINDEXTABLE2048_TABLE_LENGTH ((uint16_t)3808) +#define ARMBITREVINDEXTABLE4096_TABLE_LENGTH ((uint16_t)4032) + +extern const uint16_t armBitRevIndexTable16[ARMBITREVINDEXTABLE__16_TABLE_LENGTH]; +extern const uint16_t armBitRevIndexTable32[ARMBITREVINDEXTABLE__32_TABLE_LENGTH]; +extern const uint16_t armBitRevIndexTable64[ARMBITREVINDEXTABLE__64_TABLE_LENGTH]; +extern const uint16_t armBitRevIndexTable128[ARMBITREVINDEXTABLE_128_TABLE_LENGTH]; +extern const uint16_t armBitRevIndexTable256[ARMBITREVINDEXTABLE_256_TABLE_LENGTH]; +extern const uint16_t armBitRevIndexTable512[ARMBITREVINDEXTABLE_512_TABLE_LENGTH]; +extern const uint16_t armBitRevIndexTable1024[ARMBITREVINDEXTABLE1024_TABLE_LENGTH]; +extern const uint16_t armBitRevIndexTable2048[ARMBITREVINDEXTABLE2048_TABLE_LENGTH]; +extern const uint16_t armBitRevIndexTable4096[ARMBITREVINDEXTABLE4096_TABLE_LENGTH]; + +/* fixed-point bit reversal tables */ +#define ARMBITREVINDEXTABLE_FIXED___16_TABLE_LENGTH ((uint16_t)12 ) +#define ARMBITREVINDEXTABLE_FIXED___32_TABLE_LENGTH ((uint16_t)24 ) +#define ARMBITREVINDEXTABLE_FIXED___64_TABLE_LENGTH ((uint16_t)56 ) +#define ARMBITREVINDEXTABLE_FIXED__128_TABLE_LENGTH ((uint16_t)112 ) +#define ARMBITREVINDEXTABLE_FIXED__256_TABLE_LENGTH ((uint16_t)240 ) +#define ARMBITREVINDEXTABLE_FIXED__512_TABLE_LENGTH ((uint16_t)480 ) +#define ARMBITREVINDEXTABLE_FIXED_1024_TABLE_LENGTH ((uint16_t)992 ) +#define ARMBITREVINDEXTABLE_FIXED_2048_TABLE_LENGTH ((uint16_t)1984) +#define ARMBITREVINDEXTABLE_FIXED_4096_TABLE_LENGTH ((uint16_t)4032) + +extern const uint16_t armBitRevIndexTable_fixed_16[ARMBITREVINDEXTABLE_FIXED___16_TABLE_LENGTH]; +extern const uint16_t armBitRevIndexTable_fixed_32[ARMBITREVINDEXTABLE_FIXED___32_TABLE_LENGTH]; +extern const uint16_t armBitRevIndexTable_fixed_64[ARMBITREVINDEXTABLE_FIXED___64_TABLE_LENGTH]; +extern const uint16_t armBitRevIndexTable_fixed_128[ARMBITREVINDEXTABLE_FIXED__128_TABLE_LENGTH]; +extern const uint16_t armBitRevIndexTable_fixed_256[ARMBITREVINDEXTABLE_FIXED__256_TABLE_LENGTH]; +extern const uint16_t armBitRevIndexTable_fixed_512[ARMBITREVINDEXTABLE_FIXED__512_TABLE_LENGTH]; +extern const uint16_t armBitRevIndexTable_fixed_1024[ARMBITREVINDEXTABLE_FIXED_1024_TABLE_LENGTH]; +extern const uint16_t armBitRevIndexTable_fixed_2048[ARMBITREVINDEXTABLE_FIXED_2048_TABLE_LENGTH]; +extern const uint16_t armBitRevIndexTable_fixed_4096[ARMBITREVINDEXTABLE_FIXED_4096_TABLE_LENGTH]; + +/* Tables for Fast Math Sine and Cosine */ +extern const float32_t sinTable_f32[FAST_MATH_TABLE_SIZE + 1]; +extern const q31_t sinTable_q31[FAST_MATH_TABLE_SIZE + 1]; +extern const q15_t sinTable_q15[FAST_MATH_TABLE_SIZE + 1]; + +#endif /* ARM_COMMON_TABLES_H */ diff --git a/src/boards/mcu/stm32/cmsis/arm_const_structs.h b/src/boards/mcu/stm32/cmsis/arm_const_structs.h new file mode 100755 index 0000000..54595f5 --- /dev/null +++ b/src/boards/mcu/stm32/cmsis/arm_const_structs.h @@ -0,0 +1,79 @@ +/* ---------------------------------------------------------------------- +* Copyright (C) 2010-2014 ARM Limited. All rights reserved. +* +* $Date: 19. March 2015 +* $Revision: V.1.4.5 +* +* Project: CMSIS DSP Library +* Title: arm_const_structs.h +* +* Description: This file has constant structs that are initialized for +* user convenience. For example, some can be given as +* arguments to the arm_cfft_f32() function. +* +* Target Processor: Cortex-M4/Cortex-M3 +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* - Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* - Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in +* the documentation and/or other materials provided with the +* distribution. +* - Neither the name of ARM LIMITED nor the names of its contributors +* may be used to endorse or promote products derived from this +* software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER +* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +* POSSIBILITY OF SUCH DAMAGE. +* -------------------------------------------------------------------- */ + +#ifndef _ARM_CONST_STRUCTS_H +#define _ARM_CONST_STRUCTS_H + +#include "arm_math.h" +#include "arm_common_tables.h" + + extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len16; + extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len32; + extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len64; + extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len128; + extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len256; + extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len512; + extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len1024; + extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len2048; + extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len4096; + + extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len16; + extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len32; + extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len64; + extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len128; + extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len256; + extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len512; + extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len1024; + extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len2048; + extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len4096; + + extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len16; + extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len32; + extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len64; + extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len128; + extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len256; + extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len512; + extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len1024; + extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len2048; + extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len4096; + +#endif diff --git a/src/boards/mcu/stm32/cmsis/arm_math.h b/src/boards/mcu/stm32/cmsis/arm_math.h new file mode 100755 index 0000000..580cbbd --- /dev/null +++ b/src/boards/mcu/stm32/cmsis/arm_math.h @@ -0,0 +1,7154 @@ +/* ---------------------------------------------------------------------- +* Copyright (C) 2010-2015 ARM Limited. All rights reserved. +* +* $Date: 20. October 2015 +* $Revision: V1.4.5 b +* +* Project: CMSIS DSP Library +* Title: arm_math.h +* +* Description: Public header file for CMSIS DSP Library +* +* Target Processor: Cortex-M7/Cortex-M4/Cortex-M3/Cortex-M0 +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* - Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* - Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in +* the documentation and/or other materials provided with the +* distribution. +* - Neither the name of ARM LIMITED nor the names of its contributors +* may be used to endorse or promote products derived from this +* software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER +* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +* POSSIBILITY OF SUCH DAMAGE. + * -------------------------------------------------------------------- */ + +/** + \mainpage CMSIS DSP Software Library + * + * Introduction + * ------------ + * + * This user manual describes the CMSIS DSP software library, + * a suite of common signal processing functions for use on Cortex-M processor based devices. + * + * The library is divided into a number of functions each covering a specific category: + * - Basic math functions + * - Fast math functions + * - Complex math functions + * - Filters + * - Matrix functions + * - Transforms + * - Motor control functions + * - Statistical functions + * - Support functions + * - Interpolation functions + * + * The library has separate functions for operating on 8-bit integers, 16-bit integers, + * 32-bit integer and 32-bit floating-point values. + * + * Using the Library + * ------------ + * + * The library installer contains prebuilt versions of the libraries in the Lib folder. + * - arm_cortexM7lfdp_math.lib (Little endian and Double Precision Floating Point Unit on Cortex-M7) + * - arm_cortexM7bfdp_math.lib (Big endian and Double Precision Floating Point Unit on Cortex-M7) + * - arm_cortexM7lfsp_math.lib (Little endian and Single Precision Floating Point Unit on Cortex-M7) + * - arm_cortexM7bfsp_math.lib (Big endian and Single Precision Floating Point Unit on Cortex-M7) + * - arm_cortexM7l_math.lib (Little endian on Cortex-M7) + * - arm_cortexM7b_math.lib (Big endian on Cortex-M7) + * - arm_cortexM4lf_math.lib (Little endian and Floating Point Unit on Cortex-M4) + * - arm_cortexM4bf_math.lib (Big endian and Floating Point Unit on Cortex-M4) + * - arm_cortexM4l_math.lib (Little endian on Cortex-M4) + * - arm_cortexM4b_math.lib (Big endian on Cortex-M4) + * - arm_cortexM3l_math.lib (Little endian on Cortex-M3) + * - arm_cortexM3b_math.lib (Big endian on Cortex-M3) + * - arm_cortexM0l_math.lib (Little endian on Cortex-M0 / CortexM0+) + * - arm_cortexM0b_math.lib (Big endian on Cortex-M0 / CortexM0+) + * + * The library functions are declared in the public file arm_math.h which is placed in the Include folder. + * Simply include this file and link the appropriate library in the application and begin calling the library functions. The Library supports single + * public header file arm_math.h for Cortex-M7/M4/M3/M0/M0+ with little endian and big endian. Same header file will be used for floating point unit(FPU) variants. + * Define the appropriate pre processor MACRO ARM_MATH_CM7 or ARM_MATH_CM4 or ARM_MATH_CM3 or + * ARM_MATH_CM0 or ARM_MATH_CM0PLUS depending on the target processor in the application. + * + * Examples + * -------- + * + * The library ships with a number of examples which demonstrate how to use the library functions. + * + * Toolchain Support + * ------------ + * + * The library has been developed and tested with MDK-ARM version 5.14.0.0 + * The library is being tested in GCC and IAR toolchains and updates on this activity will be made available shortly. + * + * Building the Library + * ------------ + * + * The library installer contains a project file to re build libraries on MDK-ARM Tool chain in the CMSIS\\DSP_Lib\\Source\\ARM folder. + * - arm_cortexM_math.uvprojx + * + * + * The libraries can be built by opening the arm_cortexM_math.uvprojx project in MDK-ARM, selecting a specific target, and defining the optional pre processor MACROs detailed above. + * + * Pre-processor Macros + * ------------ + * + * Each library project have differant pre-processor macros. + * + * - UNALIGNED_SUPPORT_DISABLE: + * + * Define macro UNALIGNED_SUPPORT_DISABLE, If the silicon does not support unaligned memory access + * + * - ARM_MATH_BIG_ENDIAN: + * + * Define macro ARM_MATH_BIG_ENDIAN to build the library for big endian targets. By default library builds for little endian targets. + * + * - ARM_MATH_MATRIX_CHECK: + * + * Define macro ARM_MATH_MATRIX_CHECK for checking on the input and output sizes of matrices + * + * - ARM_MATH_ROUNDING: + * + * Define macro ARM_MATH_ROUNDING for rounding on support functions + * + * - ARM_MATH_CMx: + * + * Define macro ARM_MATH_CM4 for building the library on Cortex-M4 target, ARM_MATH_CM3 for building library on Cortex-M3 target + * and ARM_MATH_CM0 for building library on Cortex-M0 target, ARM_MATH_CM0PLUS for building library on Cortex-M0+ target, and + * ARM_MATH_CM7 for building the library on cortex-M7. + * + * - __FPU_PRESENT: + * + * Initialize macro __FPU_PRESENT = 1 when building on FPU supported Targets. Enable this macro for M4bf and M4lf libraries + * + *
+ * CMSIS-DSP in ARM::CMSIS Pack + * ----------------------------- + * + * The following files relevant to CMSIS-DSP are present in the ARM::CMSIS Pack directories: + * |File/Folder |Content | + * |------------------------------|------------------------------------------------------------------------| + * |\b CMSIS\\Documentation\\DSP | This documentation | + * |\b CMSIS\\DSP_Lib | Software license agreement (license.txt) | + * |\b CMSIS\\DSP_Lib\\Examples | Example projects demonstrating the usage of the library functions | + * |\b CMSIS\\DSP_Lib\\Source | Source files for rebuilding the library | + * + *
+ * Revision History of CMSIS-DSP + * ------------ + * Please refer to \ref ChangeLog_pg. + * + * Copyright Notice + * ------------ + * + * Copyright (C) 2010-2015 ARM Limited. All rights reserved. + */ + + +/** + * @defgroup groupMath Basic Math Functions + */ + +/** + * @defgroup groupFastMath Fast Math Functions + * This set of functions provides a fast approximation to sine, cosine, and square root. + * As compared to most of the other functions in the CMSIS math library, the fast math functions + * operate on individual values and not arrays. + * There are separate functions for Q15, Q31, and floating-point data. + * + */ + +/** + * @defgroup groupCmplxMath Complex Math Functions + * This set of functions operates on complex data vectors. + * The data in the complex arrays is stored in an interleaved fashion + * (real, imag, real, imag, ...). + * In the API functions, the number of samples in a complex array refers + * to the number of complex values; the array contains twice this number of + * real values. + */ + +/** + * @defgroup groupFilters Filtering Functions + */ + +/** + * @defgroup groupMatrix Matrix Functions + * + * This set of functions provides basic matrix math operations. + * The functions operate on matrix data structures. For example, + * the type + * definition for the floating-point matrix structure is shown + * below: + * 
+ *     typedef struct
+ *     {
+ *       uint16_t numRows;     // number of rows of the matrix.
+ *       uint16_t numCols;     // number of columns of the matrix.
+ *       float32_t *pData;     // points to the data of the matrix.
+ *     } arm_matrix_instance_f32;
+ *
+ * There are similar definitions for Q15 and Q31 data types. + * + * The structure specifies the size of the matrix and then points to + * an array of data. The array is of size numRows X numCols + * and the values are arranged in row order. That is, the + * matrix element (i, j) is stored at: + * 
+ *     pData[i*numCols + j]
+ *
+ * + * \par Init Functions + * There is an associated initialization function for each type of matrix + * data structure. + * The initialization function sets the values of the internal structure fields. + * Refer to the function arm_mat_init_f32(), arm_mat_init_q31() + * and arm_mat_init_q15() for floating-point, Q31 and Q15 types, respectively. + * + * \par + * Use of the initialization function is optional. However, if initialization function is used + * then the instance structure cannot be placed into a const data section. + * To place the instance structure in a const data + * section, manually initialize the data structure. For example: + * 
+ * arm_matrix_instance_f32 S = {nRows, nColumns, pData};
+ * arm_matrix_instance_q31 S = {nRows, nColumns, pData};
+ * arm_matrix_instance_q15 S = {nRows, nColumns, pData};
+ *
+ * where nRows specifies the number of rows, nColumns + * specifies the number of columns, and pData points to the + * data array. + * + * \par Size Checking + * By default all of the matrix functions perform size checking on the input and + * output matrices. For example, the matrix addition function verifies that the + * two input matrices and the output matrix all have the same number of rows and + * columns. If the size check fails the functions return: + * 
+ *     ARM_MATH_SIZE_MISMATCH
+ *
+ * Otherwise the functions return + * 
+ *     ARM_MATH_SUCCESS
+ *
+ * There is some overhead associated with this matrix size checking. + * The matrix size checking is enabled via the \#define + * 
+ *     ARM_MATH_MATRIX_CHECK
+ *
+ * within the library project settings. By default this macro is defined + * and size checking is enabled. By changing the project settings and + * undefining this macro size checking is eliminated and the functions + * run a bit faster. With size checking disabled the functions always + * return ARM_MATH_SUCCESS. + */ + +/** + * @defgroup groupTransforms Transform Functions + */ + +/** + * @defgroup groupController Controller Functions + */ + +/** + * @defgroup groupStats Statistics Functions + */ +/** + * @defgroup groupSupport Support Functions + */ + +/** + * @defgroup groupInterpolation Interpolation Functions + * These functions perform 1- and 2-dimensional interpolation of data. + * Linear interpolation is used for 1-dimensional data and + * bilinear interpolation is used for 2-dimensional data. + */ + +/** + * @defgroup groupExamples Examples + */ +#ifndef _ARM_MATH_H +#define _ARM_MATH_H + +/* ignore some GCC warnings */ +#if defined ( __GNUC__ ) +#pragma GCC diagnostic push +#pragma GCC diagnostic ignored "-Wsign-conversion" +#pragma GCC diagnostic ignored "-Wconversion" +#pragma GCC diagnostic ignored "-Wunused-parameter" +#endif + +#define __CMSIS_GENERIC /* disable NVIC and Systick functions */ + +#if defined(ARM_MATH_CM7) + #include "core_cm7.h" +#elif defined (ARM_MATH_CM4) + #include "core_cm4.h" +#elif defined (ARM_MATH_CM3) + #include "core_cm3.h" +#elif defined (ARM_MATH_CM0) + #include "core_cm0.h" + #define ARM_MATH_CM0_FAMILY +#elif defined (ARM_MATH_CM0PLUS) + #include "core_cm0plus.h" + #define ARM_MATH_CM0_FAMILY +#else + #error "Define according the used Cortex core ARM_MATH_CM7, ARM_MATH_CM4, ARM_MATH_CM3, ARM_MATH_CM0PLUS or ARM_MATH_CM0" +#endif + +#undef __CMSIS_GENERIC /* enable NVIC and Systick functions */ +#include "string.h" +#include "math.h" +#ifdef __cplusplus +extern "C" +{ +#endif + + + /** + * @brief Macros required for reciprocal calculation in Normalized LMS + */ + +#define DELTA_Q31 (0x100) +#define DELTA_Q15 0x5 +#define INDEX_MASK 0x0000003F +#ifndef PI +#define PI 3.14159265358979f +#endif + + /** + * @brief Macros required for SINE and COSINE Fast math approximations + */ + +#define FAST_MATH_TABLE_SIZE 512 +#define FAST_MATH_Q31_SHIFT (32 - 10) +#define FAST_MATH_Q15_SHIFT (16 - 10) +#define CONTROLLER_Q31_SHIFT (32 - 9) +#define TABLE_SIZE 256 +#define TABLE_SPACING_Q31 0x400000 +#define TABLE_SPACING_Q15 0x80 + + /** + * @brief Macros required for SINE and COSINE Controller functions + */ + /* 1.31(q31) Fixed value of 2/360 */ + /* -1 to +1 is divided into 360 values so total spacing is (2/360) */ +#define INPUT_SPACING 0xB60B61 + + /** + * @brief Macro for Unaligned Support + */ +#ifndef UNALIGNED_SUPPORT_DISABLE + #define ALIGN4 +#else + #if defined (__GNUC__) + #define ALIGN4 __attribute__((aligned(4))) + #else + #define ALIGN4 __align(4) + #endif +#endif /* #ifndef UNALIGNED_SUPPORT_DISABLE */ + + /** + * @brief Error status returned by some functions in the library. + */ + + typedef enum + { + ARM_MATH_SUCCESS = 0, /**< No error */ + ARM_MATH_ARGUMENT_ERROR = -1, /**< One or more arguments are incorrect */ + ARM_MATH_LENGTH_ERROR = -2, /**< Length of data buffer is incorrect */ + ARM_MATH_SIZE_MISMATCH = -3, /**< Size of matrices is not compatible with the operation. */ + ARM_MATH_NANINF = -4, /**< Not-a-number (NaN) or infinity is generated */ + ARM_MATH_SINGULAR = -5, /**< Generated by matrix inversion if the input matrix is singular and cannot be inverted. */ + ARM_MATH_TEST_FAILURE = -6 /**< Test Failed */ + } arm_status; + + /** + * @brief 8-bit fractional data type in 1.7 format. + */ + typedef int8_t q7_t; + + /** + * @brief 16-bit fractional data type in 1.15 format. + */ + typedef int16_t q15_t; + + /** + * @brief 32-bit fractional data type in 1.31 format. + */ + typedef int32_t q31_t; + + /** + * @brief 64-bit fractional data type in 1.63 format. + */ + typedef int64_t q63_t; + + /** + * @brief 32-bit floating-point type definition. + */ + typedef float float32_t; + + /** + * @brief 64-bit floating-point type definition. + */ + typedef double float64_t; + + /** + * @brief definition to read/write two 16 bit values. + */ +#if defined __CC_ARM + #define __SIMD32_TYPE int32_t __packed + #define CMSIS_UNUSED __attribute__((unused)) + +#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #define __SIMD32_TYPE int32_t + #define CMSIS_UNUSED __attribute__((unused)) + +#elif defined __GNUC__ + #define __SIMD32_TYPE int32_t + #define CMSIS_UNUSED __attribute__((unused)) + +#elif defined __ICCARM__ + #define __SIMD32_TYPE int32_t __packed + #define CMSIS_UNUSED + +#elif defined __CSMC__ + #define __SIMD32_TYPE int32_t + #define CMSIS_UNUSED + +#elif defined __TASKING__ + #define __SIMD32_TYPE __unaligned int32_t + #define CMSIS_UNUSED + +#else + #error Unknown compiler +#endif + +#define __SIMD32(addr) (*(__SIMD32_TYPE **) & (addr)) +#define __SIMD32_CONST(addr) ((__SIMD32_TYPE *)(addr)) +#define _SIMD32_OFFSET(addr) (*(__SIMD32_TYPE *) (addr)) +#define __SIMD64(addr) (*(int64_t **) & (addr)) + +#if defined (ARM_MATH_CM3) || defined (ARM_MATH_CM0_FAMILY) + /** + * @brief definition to pack two 16 bit values. + */ +#define __PKHBT(ARG1, ARG2, ARG3) ( (((int32_t)(ARG1) << 0) & (int32_t)0x0000FFFF) | \ + (((int32_t)(ARG2) << ARG3) & (int32_t)0xFFFF0000) ) +#define __PKHTB(ARG1, ARG2, ARG3) ( (((int32_t)(ARG1) << 0) & (int32_t)0xFFFF0000) | \ + (((int32_t)(ARG2) >> ARG3) & (int32_t)0x0000FFFF) ) + +#endif + + + /** + * @brief definition to pack four 8 bit values. + */ +#ifndef ARM_MATH_BIG_ENDIAN + +#define __PACKq7(v0,v1,v2,v3) ( (((int32_t)(v0) << 0) & (int32_t)0x000000FF) | \ + (((int32_t)(v1) << 8) & (int32_t)0x0000FF00) | \ + (((int32_t)(v2) << 16) & (int32_t)0x00FF0000) | \ + (((int32_t)(v3) << 24) & (int32_t)0xFF000000) ) +#else + +#define __PACKq7(v0,v1,v2,v3) ( (((int32_t)(v3) << 0) & (int32_t)0x000000FF) | \ + (((int32_t)(v2) << 8) & (int32_t)0x0000FF00) | \ + (((int32_t)(v1) << 16) & (int32_t)0x00FF0000) | \ + (((int32_t)(v0) << 24) & (int32_t)0xFF000000) ) + +#endif + + + /** + * @brief Clips Q63 to Q31 values. + */ + static __INLINE q31_t clip_q63_to_q31( + q63_t x) + { + return ((q31_t) (x >> 32) != ((q31_t) x >> 31)) ? + ((0x7FFFFFFF ^ ((q31_t) (x >> 63)))) : (q31_t) x; + } + + /** + * @brief Clips Q63 to Q15 values. + */ + static __INLINE q15_t clip_q63_to_q15( + q63_t x) + { + return ((q31_t) (x >> 32) != ((q31_t) x >> 31)) ? + ((0x7FFF ^ ((q15_t) (x >> 63)))) : (q15_t) (x >> 15); + } + + /** + * @brief Clips Q31 to Q7 values. + */ + static __INLINE q7_t clip_q31_to_q7( + q31_t x) + { + return ((q31_t) (x >> 24) != ((q31_t) x >> 23)) ? + ((0x7F ^ ((q7_t) (x >> 31)))) : (q7_t) x; + } + + /** + * @brief Clips Q31 to Q15 values. + */ + static __INLINE q15_t clip_q31_to_q15( + q31_t x) + { + return ((q31_t) (x >> 16) != ((q31_t) x >> 15)) ? + ((0x7FFF ^ ((q15_t) (x >> 31)))) : (q15_t) x; + } + + /** + * @brief Multiplies 32 X 64 and returns 32 bit result in 2.30 format. + */ + + static __INLINE q63_t mult32x64( + q63_t x, + q31_t y) + { + return ((((q63_t) (x & 0x00000000FFFFFFFF) * y) >> 32) + + (((q63_t) (x >> 32) * y))); + } + +/* + #if defined (ARM_MATH_CM0_FAMILY) && defined ( __CC_ARM ) + #define __CLZ __clz + #endif + */ +/* note: function can be removed when all toolchain support __CLZ for Cortex-M0 */ +#if defined (ARM_MATH_CM0_FAMILY) && ((defined (__ICCARM__)) ) + static __INLINE uint32_t __CLZ( + q31_t data); + + static __INLINE uint32_t __CLZ( + q31_t data) + { + uint32_t count = 0; + uint32_t mask = 0x80000000; + + while((data & mask) == 0) + { + count += 1u; + mask = mask >> 1u; + } + + return (count); + } +#endif + + /** + * @brief Function to Calculates 1/in (reciprocal) value of Q31 Data type. + */ + + static __INLINE uint32_t arm_recip_q31( + q31_t in, + q31_t * dst, + q31_t * pRecipTable) + { + q31_t out; + uint32_t tempVal; + uint32_t index, i; + uint32_t signBits; + + if(in > 0) + { + signBits = ((uint32_t) (__CLZ( in) - 1)); + } + else + { + signBits = ((uint32_t) (__CLZ(-in) - 1)); + } + + /* Convert input sample to 1.31 format */ + in = (in << signBits); + + /* calculation of index for initial approximated Val */ + index = (uint32_t)(in >> 24); + index = (index & INDEX_MASK); + + /* 1.31 with exp 1 */ + out = pRecipTable[index]; + + /* calculation of reciprocal value */ + /* running approximation for two iterations */ + for (i = 0u; i < 2u; i++) + { + tempVal = (uint32_t) (((q63_t) in * out) >> 31); + tempVal = 0x7FFFFFFFu - tempVal; + /* 1.31 with exp 1 */ + /* out = (q31_t) (((q63_t) out * tempVal) >> 30); */ + out = clip_q63_to_q31(((q63_t) out * tempVal) >> 30); + } + + /* write output */ + *dst = out; + + /* return num of signbits of out = 1/in value */ + return (signBits + 1u); + } + + + /** + * @brief Function to Calculates 1/in (reciprocal) value of Q15 Data type. + */ + static __INLINE uint32_t arm_recip_q15( + q15_t in, + q15_t * dst, + q15_t * pRecipTable) + { + q15_t out = 0; + uint32_t tempVal = 0; + uint32_t index = 0, i = 0; + uint32_t signBits = 0; + + if(in > 0) + { + signBits = ((uint32_t)(__CLZ( in) - 17)); + } + else + { + signBits = ((uint32_t)(__CLZ(-in) - 17)); + } + + /* Convert input sample to 1.15 format */ + in = (in << signBits); + + /* calculation of index for initial approximated Val */ + index = (uint32_t)(in >> 8); + index = (index & INDEX_MASK); + + /* 1.15 with exp 1 */ + out = pRecipTable[index]; + + /* calculation of reciprocal value */ + /* running approximation for two iterations */ + for (i = 0u; i < 2u; i++) + { + tempVal = (uint32_t) (((q31_t) in * out) >> 15); + tempVal = 0x7FFFu - tempVal; + /* 1.15 with exp 1 */ + out = (q15_t) (((q31_t) out * tempVal) >> 14); + /* out = clip_q31_to_q15(((q31_t) out * tempVal) >> 14); */ + } + + /* write output */ + *dst = out; + + /* return num of signbits of out = 1/in value */ + return (signBits + 1); + } + + + /* + * @brief C custom defined intrinisic function for only M0 processors + */ +#if defined(ARM_MATH_CM0_FAMILY) + static __INLINE q31_t __SSAT( + q31_t x, + uint32_t y) + { + int32_t posMax, negMin; + uint32_t i; + + posMax = 1; + for (i = 0; i < (y - 1); i++) + { + posMax = posMax * 2; + } + + if(x > 0) + { + posMax = (posMax - 1); + + if(x > posMax) + { + x = posMax; + } + } + else + { + negMin = -posMax; + + if(x < negMin) + { + x = negMin; + } + } + return (x); + } +#endif /* end of ARM_MATH_CM0_FAMILY */ + + + /* + * @brief C custom defined intrinsic function for M3 and M0 processors + */ +#if defined (ARM_MATH_CM3) || defined (ARM_MATH_CM0_FAMILY) + + /* + * @brief C custom defined QADD8 for M3 and M0 processors + */ + static __INLINE uint32_t __QADD8( + uint32_t x, + uint32_t y) + { + q31_t r, s, t, u; + + r = __SSAT(((((q31_t)x << 24) >> 24) + (((q31_t)y << 24) >> 24)), 8) & (int32_t)0x000000FF; + s = __SSAT(((((q31_t)x << 16) >> 24) + (((q31_t)y << 16) >> 24)), 8) & (int32_t)0x000000FF; + t = __SSAT(((((q31_t)x << 8) >> 24) + (((q31_t)y << 8) >> 24)), 8) & (int32_t)0x000000FF; + u = __SSAT(((((q31_t)x ) >> 24) + (((q31_t)y ) >> 24)), 8) & (int32_t)0x000000FF; + + return ((uint32_t)((u << 24) | (t << 16) | (s << 8) | (r ))); + } + + + /* + * @brief C custom defined QSUB8 for M3 and M0 processors + */ + static __INLINE uint32_t __QSUB8( + uint32_t x, + uint32_t y) + { + q31_t r, s, t, u; + + r = __SSAT(((((q31_t)x << 24) >> 24) - (((q31_t)y << 24) >> 24)), 8) & (int32_t)0x000000FF; + s = __SSAT(((((q31_t)x << 16) >> 24) - (((q31_t)y << 16) >> 24)), 8) & (int32_t)0x000000FF; + t = __SSAT(((((q31_t)x << 8) >> 24) - (((q31_t)y << 8) >> 24)), 8) & (int32_t)0x000000FF; + u = __SSAT(((((q31_t)x ) >> 24) - (((q31_t)y ) >> 24)), 8) & (int32_t)0x000000FF; + + return ((uint32_t)((u << 24) | (t << 16) | (s << 8) | (r ))); + } + + + /* + * @brief C custom defined QADD16 for M3 and M0 processors + */ + static __INLINE uint32_t __QADD16( + uint32_t x, + uint32_t y) + { +/* q31_t r, s; without initialisation 'arm_offset_q15 test' fails but 'intrinsic' tests pass! for armCC */ + q31_t r = 0, s = 0; + + r = __SSAT(((((q31_t)x << 16) >> 16) + (((q31_t)y << 16) >> 16)), 16) & (int32_t)0x0000FFFF; + s = __SSAT(((((q31_t)x ) >> 16) + (((q31_t)y ) >> 16)), 16) & (int32_t)0x0000FFFF; + + return ((uint32_t)((s << 16) | (r ))); + } + + + /* + * @brief C custom defined SHADD16 for M3 and M0 processors + */ + static __INLINE uint32_t __SHADD16( + uint32_t x, + uint32_t y) + { + q31_t r, s; + + r = (((((q31_t)x << 16) >> 16) + (((q31_t)y << 16) >> 16)) >> 1) & (int32_t)0x0000FFFF; + s = (((((q31_t)x ) >> 16) + (((q31_t)y ) >> 16)) >> 1) & (int32_t)0x0000FFFF; + + return ((uint32_t)((s << 16) | (r ))); + } + + + /* + * @brief C custom defined QSUB16 for M3 and M0 processors + */ + static __INLINE uint32_t __QSUB16( + uint32_t x, + uint32_t y) + { + q31_t r, s; + + r = __SSAT(((((q31_t)x << 16) >> 16) - (((q31_t)y << 16) >> 16)), 16) & (int32_t)0x0000FFFF; + s = __SSAT(((((q31_t)x ) >> 16) - (((q31_t)y ) >> 16)), 16) & (int32_t)0x0000FFFF; + + return ((uint32_t)((s << 16) | (r ))); + } + + + /* + * @brief C custom defined SHSUB16 for M3 and M0 processors + */ + static __INLINE uint32_t __SHSUB16( + uint32_t x, + uint32_t y) + { + q31_t r, s; + + r = (((((q31_t)x << 16) >> 16) - (((q31_t)y << 16) >> 16)) >> 1) & (int32_t)0x0000FFFF; + s = (((((q31_t)x ) >> 16) - (((q31_t)y ) >> 16)) >> 1) & (int32_t)0x0000FFFF; + + return ((uint32_t)((s << 16) | (r ))); + } + + + /* + * @brief C custom defined QASX for M3 and M0 processors + */ + static __INLINE uint32_t __QASX( + uint32_t x, + uint32_t y) + { + q31_t r, s; + + r = __SSAT(((((q31_t)x << 16) >> 16) - (((q31_t)y ) >> 16)), 16) & (int32_t)0x0000FFFF; + s = __SSAT(((((q31_t)x ) >> 16) + (((q31_t)y << 16) >> 16)), 16) & (int32_t)0x0000FFFF; + + return ((uint32_t)((s << 16) | (r ))); + } + + + /* + * @brief C custom defined SHASX for M3 and M0 processors + */ + static __INLINE uint32_t __SHASX( + uint32_t x, + uint32_t y) + { + q31_t r, s; + + r = (((((q31_t)x << 16) >> 16) - (((q31_t)y ) >> 16)) >> 1) & (int32_t)0x0000FFFF; + s = (((((q31_t)x ) >> 16) + (((q31_t)y << 16) >> 16)) >> 1) & (int32_t)0x0000FFFF; + + return ((uint32_t)((s << 16) | (r ))); + } + + + /* + * @brief C custom defined QSAX for M3 and M0 processors + */ + static __INLINE uint32_t __QSAX( + uint32_t x, + uint32_t y) + { + q31_t r, s; + + r = __SSAT(((((q31_t)x << 16) >> 16) + (((q31_t)y ) >> 16)), 16) & (int32_t)0x0000FFFF; + s = __SSAT(((((q31_t)x ) >> 16) - (((q31_t)y << 16) >> 16)), 16) & (int32_t)0x0000FFFF; + + return ((uint32_t)((s << 16) | (r ))); + } + + + /* + * @brief C custom defined SHSAX for M3 and M0 processors + */ + static __INLINE uint32_t __SHSAX( + uint32_t x, + uint32_t y) + { + q31_t r, s; + + r = (((((q31_t)x << 16) >> 16) + (((q31_t)y ) >> 16)) >> 1) & (int32_t)0x0000FFFF; + s = (((((q31_t)x ) >> 16) - (((q31_t)y << 16) >> 16)) >> 1) & (int32_t)0x0000FFFF; + + return ((uint32_t)((s << 16) | (r ))); + } + + + /* + * @brief C custom defined SMUSDX for M3 and M0 processors + */ + static __INLINE uint32_t __SMUSDX( + uint32_t x, + uint32_t y) + { + return ((uint32_t)(((((q31_t)x << 16) >> 16) * (((q31_t)y ) >> 16)) - + ((((q31_t)x ) >> 16) * (((q31_t)y << 16) >> 16)) )); + } + + /* + * @brief C custom defined SMUADX for M3 and M0 processors + */ + static __INLINE uint32_t __SMUADX( + uint32_t x, + uint32_t y) + { + return ((uint32_t)(((((q31_t)x << 16) >> 16) * (((q31_t)y ) >> 16)) + + ((((q31_t)x ) >> 16) * (((q31_t)y << 16) >> 16)) )); + } + + + /* + * @brief C custom defined QADD for M3 and M0 processors + */ + static __INLINE int32_t __QADD( + int32_t x, + int32_t y) + { + return ((int32_t)(clip_q63_to_q31((q63_t)x + (q31_t)y))); + } + + + /* + * @brief C custom defined QSUB for M3 and M0 processors + */ + static __INLINE int32_t __QSUB( + int32_t x, + int32_t y) + { + return ((int32_t)(clip_q63_to_q31((q63_t)x - (q31_t)y))); + } + + + /* + * @brief C custom defined SMLAD for M3 and M0 processors + */ + static __INLINE uint32_t __SMLAD( + uint32_t x, + uint32_t y, + uint32_t sum) + { + return ((uint32_t)(((((q31_t)x << 16) >> 16) * (((q31_t)y << 16) >> 16)) + + ((((q31_t)x ) >> 16) * (((q31_t)y ) >> 16)) + + ( ((q31_t)sum ) ) )); + } + + + /* + * @brief C custom defined SMLADX for M3 and M0 processors + */ + static __INLINE uint32_t __SMLADX( + uint32_t x, + uint32_t y, + uint32_t sum) + { + return ((uint32_t)(((((q31_t)x << 16) >> 16) * (((q31_t)y ) >> 16)) + + ((((q31_t)x ) >> 16) * (((q31_t)y << 16) >> 16)) + + ( ((q31_t)sum ) ) )); + } + + + /* + * @brief C custom defined SMLSDX for M3 and M0 processors + */ + static __INLINE uint32_t __SMLSDX( + uint32_t x, + uint32_t y, + uint32_t sum) + { + return ((uint32_t)(((((q31_t)x << 16) >> 16) * (((q31_t)y ) >> 16)) - + ((((q31_t)x ) >> 16) * (((q31_t)y << 16) >> 16)) + + ( ((q31_t)sum ) ) )); + } + + + /* + * @brief C custom defined SMLALD for M3 and M0 processors + */ + static __INLINE uint64_t __SMLALD( + uint32_t x, + uint32_t y, + uint64_t sum) + { +/* return (sum + ((q15_t) (x >> 16) * (q15_t) (y >> 16)) + ((q15_t) x * (q15_t) y)); */ + return ((uint64_t)(((((q31_t)x << 16) >> 16) * (((q31_t)y << 16) >> 16)) + + ((((q31_t)x ) >> 16) * (((q31_t)y ) >> 16)) + + ( ((q63_t)sum ) ) )); + } + + + /* + * @brief C custom defined SMLALDX for M3 and M0 processors + */ + static __INLINE uint64_t __SMLALDX( + uint32_t x, + uint32_t y, + uint64_t sum) + { +/* return (sum + ((q15_t) (x >> 16) * (q15_t) y)) + ((q15_t) x * (q15_t) (y >> 16)); */ + return ((uint64_t)(((((q31_t)x << 16) >> 16) * (((q31_t)y ) >> 16)) + + ((((q31_t)x ) >> 16) * (((q31_t)y << 16) >> 16)) + + ( ((q63_t)sum ) ) )); + } + + + /* + * @brief C custom defined SMUAD for M3 and M0 processors + */ + static __INLINE uint32_t __SMUAD( + uint32_t x, + uint32_t y) + { + return ((uint32_t)(((((q31_t)x << 16) >> 16) * (((q31_t)y << 16) >> 16)) + + ((((q31_t)x ) >> 16) * (((q31_t)y ) >> 16)) )); + } + + + /* + * @brief C custom defined SMUSD for M3 and M0 processors + */ + static __INLINE uint32_t __SMUSD( + uint32_t x, + uint32_t y) + { + return ((uint32_t)(((((q31_t)x << 16) >> 16) * (((q31_t)y << 16) >> 16)) - + ((((q31_t)x ) >> 16) * (((q31_t)y ) >> 16)) )); + } + + + /* + * @brief C custom defined SXTB16 for M3 and M0 processors + */ + static __INLINE uint32_t __SXTB16( + uint32_t x) + { + return ((uint32_t)(((((q31_t)x << 24) >> 24) & (q31_t)0x0000FFFF) | + ((((q31_t)x << 8) >> 8) & (q31_t)0xFFFF0000) )); + } + +#endif /* defined (ARM_MATH_CM3) || defined (ARM_MATH_CM0_FAMILY) */ + + + /** + * @brief Instance structure for the Q7 FIR filter. + */ + typedef struct + { + uint16_t numTaps; /**< number of filter coefficients in the filter. */ + q7_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */ + q7_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/ + } arm_fir_instance_q7; + + /** + * @brief Instance structure for the Q15 FIR filter. + */ + typedef struct + { + uint16_t numTaps; /**< number of filter coefficients in the filter. */ + q15_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */ + q15_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/ + } arm_fir_instance_q15; + + /** + * @brief Instance structure for the Q31 FIR filter. + */ + typedef struct + { + uint16_t numTaps; /**< number of filter coefficients in the filter. */ + q31_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */ + q31_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */ + } arm_fir_instance_q31; + + /** + * @brief Instance structure for the floating-point FIR filter. + */ + typedef struct + { + uint16_t numTaps; /**< number of filter coefficients in the filter. */ + float32_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */ + float32_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */ + } arm_fir_instance_f32; + + + /** + * @brief Processing function for the Q7 FIR filter. + * @param[in] S points to an instance of the Q7 FIR filter structure. + * @param[in] pSrc points to the block of input data. + * @param[out] pDst points to the block of output data. + * @param[in] blockSize number of samples to process. + */ + void arm_fir_q7( + const arm_fir_instance_q7 * S, + q7_t * pSrc, + q7_t * pDst, + uint32_t blockSize); + + + /** + * @brief Initialization function for the Q7 FIR filter. + * @param[in,out] S points to an instance of the Q7 FIR structure. + * @param[in] numTaps Number of filter coefficients in the filter. + * @param[in] pCoeffs points to the filter coefficients. + * @param[in] pState points to the state buffer. + * @param[in] blockSize number of samples that are processed. + */ + void arm_fir_init_q7( + arm_fir_instance_q7 * S, + uint16_t numTaps, + q7_t * pCoeffs, + q7_t * pState, + uint32_t blockSize); + + + /** + * @brief Processing function for the Q15 FIR filter. + * @param[in] S points to an instance of the Q15 FIR structure. + * @param[in] pSrc points to the block of input data. + * @param[out] pDst points to the block of output data. + * @param[in] blockSize number of samples to process. + */ + void arm_fir_q15( + const arm_fir_instance_q15 * S, + q15_t * pSrc, + q15_t * pDst, + uint32_t blockSize); + + + /** + * @brief Processing function for the fast Q15 FIR filter for Cortex-M3 and Cortex-M4. + * @param[in] S points to an instance of the Q15 FIR filter structure. + * @param[in] pSrc points to the block of input data. + * @param[out] pDst points to the block of output data. + * @param[in] blockSize number of samples to process. + */ + void arm_fir_fast_q15( + const arm_fir_instance_q15 * S, + q15_t * pSrc, + q15_t * pDst, + uint32_t blockSize); + + + /** + * @brief Initialization function for the Q15 FIR filter. + * @param[in,out] S points to an instance of the Q15 FIR filter structure. + * @param[in] numTaps Number of filter coefficients in the filter. Must be even and greater than or equal to 4. + * @param[in] pCoeffs points to the filter coefficients. + * @param[in] pState points to the state buffer. + * @param[in] blockSize number of samples that are processed at a time. + * @return The function returns ARM_MATH_SUCCESS if initialization was successful or ARM_MATH_ARGUMENT_ERROR if + * numTaps is not a supported value. + */ + arm_status arm_fir_init_q15( + arm_fir_instance_q15 * S, + uint16_t numTaps, + q15_t * pCoeffs, + q15_t * pState, + uint32_t blockSize); + + + /** + * @brief Processing function for the Q31 FIR filter. + * @param[in] S points to an instance of the Q31 FIR filter structure. + * @param[in] pSrc points to the block of input data. + * @param[out] pDst points to the block of output data. + * @param[in] blockSize number of samples to process. + */ + void arm_fir_q31( + const arm_fir_instance_q31 * S, + q31_t * pSrc, + q31_t * pDst, + uint32_t blockSize); + + + /** + * @brief Processing function for the fast Q31 FIR filter for Cortex-M3 and Cortex-M4. + * @param[in] S points to an instance of the Q31 FIR structure. + * @param[in] pSrc points to the block of input data. + * @param[out] pDst points to the block of output data. + * @param[in] blockSize number of samples to process. + */ + void arm_fir_fast_q31( + const arm_fir_instance_q31 * S, + q31_t * pSrc, + q31_t * pDst, + uint32_t blockSize); + + + /** + * @brief Initialization function for the Q31 FIR filter. + * @param[in,out] S points to an instance of the Q31 FIR structure. + * @param[in] numTaps Number of filter coefficients in the filter. + * @param[in] pCoeffs points to the filter coefficients. + * @param[in] pState points to the state buffer. + * @param[in] blockSize number of samples that are processed at a time. + */ + void arm_fir_init_q31( + arm_fir_instance_q31 * S, + uint16_t numTaps, + q31_t * pCoeffs, + q31_t * pState, + uint32_t blockSize); + + + /** + * @brief Processing function for the floating-point FIR filter. + * @param[in] S points to an instance of the floating-point FIR structure. + * @param[in] pSrc points to the block of input data. + * @param[out] pDst points to the block of output data. + * @param[in] blockSize number of samples to process. + */ + void arm_fir_f32( + const arm_fir_instance_f32 * S, + float32_t * pSrc, + float32_t * pDst, + uint32_t blockSize); + + + /** + * @brief Initialization function for the floating-point FIR filter. + * @param[in,out] S points to an instance of the floating-point FIR filter structure. + * @param[in] numTaps Number of filter coefficients in the filter. + * @param[in] pCoeffs points to the filter coefficients. + * @param[in] pState points to the state buffer. + * @param[in] blockSize number of samples that are processed at a time. + */ + void arm_fir_init_f32( + arm_fir_instance_f32 * S, + uint16_t numTaps, + float32_t * pCoeffs, + float32_t * pState, + uint32_t blockSize); + + + /** + * @brief Instance structure for the Q15 Biquad cascade filter. + */ + typedef struct + { + int8_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */ + q15_t *pState; /**< Points to the array of state coefficients. The array is of length 4*numStages. */ + q15_t *pCoeffs; /**< Points to the array of coefficients. The array is of length 5*numStages. */ + int8_t postShift; /**< Additional shift, in bits, applied to each output sample. */ + } arm_biquad_casd_df1_inst_q15; + + /** + * @brief Instance structure for the Q31 Biquad cascade filter. + */ + typedef struct + { + uint32_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */ + q31_t *pState; /**< Points to the array of state coefficients. The array is of length 4*numStages. */ + q31_t *pCoeffs; /**< Points to the array of coefficients. The array is of length 5*numStages. */ + uint8_t postShift; /**< Additional shift, in bits, applied to each output sample. */ + } arm_biquad_casd_df1_inst_q31; + + /** + * @brief Instance structure for the floating-point Biquad cascade filter. + */ + typedef struct + { + uint32_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */ + float32_t *pState; /**< Points to the array of state coefficients. The array is of length 4*numStages. */ + float32_t *pCoeffs; /**< Points to the array of coefficients. The array is of length 5*numStages. */ + } arm_biquad_casd_df1_inst_f32; + + + /** + * @brief Processing function for the Q15 Biquad cascade filter. + * @param[in] S points to an instance of the Q15 Biquad cascade structure. + * @param[in] pSrc points to the block of input data. + * @param[out] pDst points to the block of output data. + * @param[in] blockSize number of samples to process. + */ + void arm_biquad_cascade_df1_q15( + const arm_biquad_casd_df1_inst_q15 * S, + q15_t * pSrc, + q15_t * pDst, + uint32_t blockSize); + + + /** + * @brief Initialization function for the Q15 Biquad cascade filter. + * @param[in,out] S points to an instance of the Q15 Biquad cascade structure. + * @param[in] numStages number of 2nd order stages in the filter. + * @param[in] pCoeffs points to the filter coefficients. + * @param[in] pState points to the state buffer. + * @param[in] postShift Shift to be applied to the output. Varies according to the coefficients format + */ + void arm_biquad_cascade_df1_init_q15( + arm_biquad_casd_df1_inst_q15 * S, + uint8_t numStages, + q15_t * pCoeffs, + q15_t * pState, + int8_t postShift); + + + /** + * @brief Fast but less precise processing function for the Q15 Biquad cascade filter for Cortex-M3 and Cortex-M4. + * @param[in] S points to an instance of the Q15 Biquad cascade structure. + * @param[in] pSrc points to the block of input data. + * @param[out] pDst points to the block of output data. + * @param[in] blockSize number of samples to process. + */ + void arm_biquad_cascade_df1_fast_q15( + const arm_biquad_casd_df1_inst_q15 * S, + q15_t * pSrc, + q15_t * pDst, + uint32_t blockSize); + + + /** + * @brief Processing function for the Q31 Biquad cascade filter + * @param[in] S points to an instance of the Q31 Biquad cascade structure. + * @param[in] pSrc points to the block of input data. + * @param[out] pDst points to the block of output data. + * @param[in] blockSize number of samples to process. + */ + void arm_biquad_cascade_df1_q31( + const arm_biquad_casd_df1_inst_q31 * S, + q31_t * pSrc, + q31_t * pDst, + uint32_t blockSize); + + + /** + * @brief Fast but less precise processing function for the Q31 Biquad cascade filter for Cortex-M3 and Cortex-M4. + * @param[in] S points to an instance of the Q31 Biquad cascade structure. + * @param[in] pSrc points to the block of input data. + * @param[out] pDst points to the block of output data. + * @param[in] blockSize number of samples to process. + */ + void arm_biquad_cascade_df1_fast_q31( + const arm_biquad_casd_df1_inst_q31 * S, + q31_t * pSrc, + q31_t * pDst, + uint32_t blockSize); + + + /** + * @brief Initialization function for the Q31 Biquad cascade filter. + * @param[in,out] S points to an instance of the Q31 Biquad cascade structure. + * @param[in] numStages number of 2nd order stages in the filter. + * @param[in] pCoeffs points to the filter coefficients. + * @param[in] pState points to the state buffer. + * @param[in] postShift Shift to be applied to the output. Varies according to the coefficients format + */ + void arm_biquad_cascade_df1_init_q31( + arm_biquad_casd_df1_inst_q31 * S, + uint8_t numStages, + q31_t * pCoeffs, + q31_t * pState, + int8_t postShift); + + + /** + * @brief Processing function for the floating-point Biquad cascade filter. + * @param[in] S points to an instance of the floating-point Biquad cascade structure. + * @param[in] pSrc points to the block of input data. + * @param[out] pDst points to the block of output data. + * @param[in] blockSize number of samples to process. + */ + void arm_biquad_cascade_df1_f32( + const arm_biquad_casd_df1_inst_f32 * S, + float32_t * pSrc, + float32_t * pDst, + uint32_t blockSize); + + + /** + * @brief Initialization function for the floating-point Biquad cascade filter. + * @param[in,out] S points to an instance of the floating-point Biquad cascade structure. + * @param[in] numStages number of 2nd order stages in the filter. + * @param[in] pCoeffs points to the filter coefficients. + * @param[in] pState points to the state buffer. + */ + void arm_biquad_cascade_df1_init_f32( + arm_biquad_casd_df1_inst_f32 * S, + uint8_t numStages, + float32_t * pCoeffs, + float32_t * pState); + + + /** + * @brief Instance structure for the floating-point matrix structure. + */ + typedef struct + { + uint16_t numRows; /**< number of rows of the matrix. */ + uint16_t numCols; /**< number of columns of the matrix. */ + float32_t *pData; /**< points to the data of the matrix. */ + } arm_matrix_instance_f32; + + + /** + * @brief Instance structure for the floating-point matrix structure. + */ + typedef struct + { + uint16_t numRows; /**< number of rows of the matrix. */ + uint16_t numCols; /**< number of columns of the matrix. */ + float64_t *pData; /**< points to the data of the matrix. */ + } arm_matrix_instance_f64; + + /** + * @brief Instance structure for the Q15 matrix structure. + */ + typedef struct + { + uint16_t numRows; /**< number of rows of the matrix. */ + uint16_t numCols; /**< number of columns of the matrix. */ + q15_t *pData; /**< points to the data of the matrix. */ + } arm_matrix_instance_q15; + + /** + * @brief Instance structure for the Q31 matrix structure. + */ + typedef struct + { + uint16_t numRows; /**< number of rows of the matrix. */ + uint16_t numCols; /**< number of columns of the matrix. */ + q31_t *pData; /**< points to the data of the matrix. */ + } arm_matrix_instance_q31; + + + /** + * @brief Floating-point matrix addition. + * @param[in] pSrcA points to the first input matrix structure + * @param[in] pSrcB points to the second input matrix structure + * @param[out] pDst points to output matrix structure + * @return The function returns either + * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking. + */ + arm_status arm_mat_add_f32( + const arm_matrix_instance_f32 * pSrcA, + const arm_matrix_instance_f32 * pSrcB, + arm_matrix_instance_f32 * pDst); + + + /** + * @brief Q15 matrix addition. + * @param[in] pSrcA points to the first input matrix structure + * @param[in] pSrcB points to the second input matrix structure + * @param[out] pDst points to output matrix structure + * @return The function returns either + * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking. + */ + arm_status arm_mat_add_q15( + const arm_matrix_instance_q15 * pSrcA, + const arm_matrix_instance_q15 * pSrcB, + arm_matrix_instance_q15 * pDst); + + + /** + * @brief Q31 matrix addition. + * @param[in] pSrcA points to the first input matrix structure + * @param[in] pSrcB points to the second input matrix structure + * @param[out] pDst points to output matrix structure + * @return The function returns either + * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking. + */ + arm_status arm_mat_add_q31( + const arm_matrix_instance_q31 * pSrcA, + const arm_matrix_instance_q31 * pSrcB, + arm_matrix_instance_q31 * pDst); + + + /** + * @brief Floating-point, complex, matrix multiplication. + * @param[in] pSrcA points to the first input matrix structure + * @param[in] pSrcB points to the second input matrix structure + * @param[out] pDst points to output matrix structure + * @return The function returns either + * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking. + */ + arm_status arm_mat_cmplx_mult_f32( + const arm_matrix_instance_f32 * pSrcA, + const arm_matrix_instance_f32 * pSrcB, + arm_matrix_instance_f32 * pDst); + + + /** + * @brief Q15, complex, matrix multiplication. + * @param[in] pSrcA points to the first input matrix structure + * @param[in] pSrcB points to the second input matrix structure + * @param[out] pDst points to output matrix structure + * @return The function returns either + * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking. + */ + arm_status arm_mat_cmplx_mult_q15( + const arm_matrix_instance_q15 * pSrcA, + const arm_matrix_instance_q15 * pSrcB, + arm_matrix_instance_q15 * pDst, + q15_t * pScratch); + + + /** + * @brief Q31, complex, matrix multiplication. + * @param[in] pSrcA points to the first input matrix structure + * @param[in] pSrcB points to the second input matrix structure + * @param[out] pDst points to output matrix structure + * @return The function returns either + * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking. + */ + arm_status arm_mat_cmplx_mult_q31( + const arm_matrix_instance_q31 * pSrcA, + const arm_matrix_instance_q31 * pSrcB, + arm_matrix_instance_q31 * pDst); + + + /** + * @brief Floating-point matrix transpose. + * @param[in] pSrc points to the input matrix + * @param[out] pDst points to the output matrix + * @return The function returns either ARM_MATH_SIZE_MISMATCH + * or ARM_MATH_SUCCESS based on the outcome of size checking. + */ + arm_status arm_mat_trans_f32( + const arm_matrix_instance_f32 * pSrc, + arm_matrix_instance_f32 * pDst); + + + /** + * @brief Q15 matrix transpose. + * @param[in] pSrc points to the input matrix + * @param[out] pDst points to the output matrix + * @return The function returns either ARM_MATH_SIZE_MISMATCH + * or ARM_MATH_SUCCESS based on the outcome of size checking. + */ + arm_status arm_mat_trans_q15( + const arm_matrix_instance_q15 * pSrc, + arm_matrix_instance_q15 * pDst); + + + /** + * @brief Q31 matrix transpose. + * @param[in] pSrc points to the input matrix + * @param[out] pDst points to the output matrix + * @return The function returns either ARM_MATH_SIZE_MISMATCH + * or ARM_MATH_SUCCESS based on the outcome of size checking. + */ + arm_status arm_mat_trans_q31( + const arm_matrix_instance_q31 * pSrc, + arm_matrix_instance_q31 * pDst); + + + /** + * @brief Floating-point matrix multiplication + * @param[in] pSrcA points to the first input matrix structure + * @param[in] pSrcB points to the second input matrix structure + * @param[out] pDst points to output matrix structure + * @return The function returns either + * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking. + */ + arm_status arm_mat_mult_f32( + const arm_matrix_instance_f32 * pSrcA, + const arm_matrix_instance_f32 * pSrcB, + arm_matrix_instance_f32 * pDst); + + + /** + * @brief Q15 matrix multiplication + * @param[in] pSrcA points to the first input matrix structure + * @param[in] pSrcB points to the second input matrix structure + * @param[out] pDst points to output matrix structure + * @param[in] pState points to the array for storing intermediate results + * @return The function returns either + * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking. + */ + arm_status arm_mat_mult_q15( + const arm_matrix_instance_q15 * pSrcA, + const arm_matrix_instance_q15 * pSrcB, + arm_matrix_instance_q15 * pDst, + q15_t * pState); + + + /** + * @brief Q15 matrix multiplication (fast variant) for Cortex-M3 and Cortex-M4 + * @param[in] pSrcA points to the first input matrix structure + * @param[in] pSrcB points to the second input matrix structure + * @param[out] pDst points to output matrix structure + * @param[in] pState points to the array for storing intermediate results + * @return The function returns either + * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking. + */ + arm_status arm_mat_mult_fast_q15( + const arm_matrix_instance_q15 * pSrcA, + const arm_matrix_instance_q15 * pSrcB, + arm_matrix_instance_q15 * pDst, + q15_t * pState); + + + /** + * @brief Q31 matrix multiplication + * @param[in] pSrcA points to the first input matrix structure + * @param[in] pSrcB points to the second input matrix structure + * @param[out] pDst points to output matrix structure + * @return The function returns either + * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking. + */ + arm_status arm_mat_mult_q31( + const arm_matrix_instance_q31 * pSrcA, + const arm_matrix_instance_q31 * pSrcB, + arm_matrix_instance_q31 * pDst); + + + /** + * @brief Q31 matrix multiplication (fast variant) for Cortex-M3 and Cortex-M4 + * @param[in] pSrcA points to the first input matrix structure + * @param[in] pSrcB points to the second input matrix structure + * @param[out] pDst points to output matrix structure + * @return The function returns either + * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking. + */ + arm_status arm_mat_mult_fast_q31( + const arm_matrix_instance_q31 * pSrcA, + const arm_matrix_instance_q31 * pSrcB, + arm_matrix_instance_q31 * pDst); + + + /** + * @brief Floating-point matrix subtraction + * @param[in] pSrcA points to the first input matrix structure + * @param[in] pSrcB points to the second input matrix structure + * @param[out] pDst points to output matrix structure + * @return The function returns either + * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking. + */ + arm_status arm_mat_sub_f32( + const arm_matrix_instance_f32 * pSrcA, + const arm_matrix_instance_f32 * pSrcB, + arm_matrix_instance_f32 * pDst); + + + /** + * @brief Q15 matrix subtraction + * @param[in] pSrcA points to the first input matrix structure + * @param[in] pSrcB points to the second input matrix structure + * @param[out] pDst points to output matrix structure + * @return The function returns either + * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking. + */ + arm_status arm_mat_sub_q15( + const arm_matrix_instance_q15 * pSrcA, + const arm_matrix_instance_q15 * pSrcB, + arm_matrix_instance_q15 * pDst); + + + /** + * @brief Q31 matrix subtraction + * @param[in] pSrcA points to the first input matrix structure + * @param[in] pSrcB points to the second input matrix structure + * @param[out] pDst points to output matrix structure + * @return The function returns either + * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking. + */ + arm_status arm_mat_sub_q31( + const arm_matrix_instance_q31 * pSrcA, + const arm_matrix_instance_q31 * pSrcB, + arm_matrix_instance_q31 * pDst); + + + /** + * @brief Floating-point matrix scaling. + * @param[in] pSrc points to the input matrix + * @param[in] scale scale factor + * @param[out] pDst points to the output matrix + * @return The function returns either + * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking. + */ + arm_status arm_mat_scale_f32( + const arm_matrix_instance_f32 * pSrc, + float32_t scale, + arm_matrix_instance_f32 * pDst); + + + /** + * @brief Q15 matrix scaling. + * @param[in] pSrc points to input matrix + * @param[in] scaleFract fractional portion of the scale factor + * @param[in] shift number of bits to shift the result by + * @param[out] pDst points to output matrix + * @return The function returns either + * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking. + */ + arm_status arm_mat_scale_q15( + const arm_matrix_instance_q15 * pSrc, + q15_t scaleFract, + int32_t shift, + arm_matrix_instance_q15 * pDst); + + + /** + * @brief Q31 matrix scaling. + * @param[in] pSrc points to input matrix + * @param[in] scaleFract fractional portion of the scale factor + * @param[in] shift number of bits to shift the result by + * @param[out] pDst points to output matrix structure + * @return The function returns either + * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking. + */ + arm_status arm_mat_scale_q31( + const arm_matrix_instance_q31 * pSrc, + q31_t scaleFract, + int32_t shift, + arm_matrix_instance_q31 * pDst); + + + /** + * @brief Q31 matrix initialization. + * @param[in,out] S points to an instance of the floating-point matrix structure. + * @param[in] nRows number of rows in the matrix. + * @param[in] nColumns number of columns in the matrix. + * @param[in] pData points to the matrix data array. + */ + void arm_mat_init_q31( + arm_matrix_instance_q31 * S, + uint16_t nRows, + uint16_t nColumns, + q31_t * pData); + + + /** + * @brief Q15 matrix initialization. + * @param[in,out] S points to an instance of the floating-point matrix structure. + * @param[in] nRows number of rows in the matrix. + * @param[in] nColumns number of columns in the matrix. + * @param[in] pData points to the matrix data array. + */ + void arm_mat_init_q15( + arm_matrix_instance_q15 * S, + uint16_t nRows, + uint16_t nColumns, + q15_t * pData); + + + /** + * @brief Floating-point matrix initialization. + * @param[in,out] S points to an instance of the floating-point matrix structure. + * @param[in] nRows number of rows in the matrix. + * @param[in] nColumns number of columns in the matrix. + * @param[in] pData points to the matrix data array. + */ + void arm_mat_init_f32( + arm_matrix_instance_f32 * S, + uint16_t nRows, + uint16_t nColumns, + float32_t * pData); + + + + /** + * @brief Instance structure for the Q15 PID Control. + */ + typedef struct + { + q15_t A0; /**< The derived gain, A0 = Kp + Ki + Kd . */ +#ifdef ARM_MATH_CM0_FAMILY + q15_t A1; + q15_t A2; +#else + q31_t A1; /**< The derived gain A1 = -Kp - 2Kd | Kd.*/ +#endif + q15_t state[3]; /**< The state array of length 3. */ + q15_t Kp; /**< The proportional gain. */ + q15_t Ki; /**< The integral gain. */ + q15_t Kd; /**< The derivative gain. */ + } arm_pid_instance_q15; + + /** + * @brief Instance structure for the Q31 PID Control. + */ + typedef struct + { + q31_t A0; /**< The derived gain, A0 = Kp + Ki + Kd . */ + q31_t A1; /**< The derived gain, A1 = -Kp - 2Kd. */ + q31_t A2; /**< The derived gain, A2 = Kd . */ + q31_t state[3]; /**< The state array of length 3. */ + q31_t Kp; /**< The proportional gain. */ + q31_t Ki; /**< The integral gain. */ + q31_t Kd; /**< The derivative gain. */ + } arm_pid_instance_q31; + + /** + * @brief Instance structure for the floating-point PID Control. + */ + typedef struct + { + float32_t A0; /**< The derived gain, A0 = Kp + Ki + Kd . */ + float32_t A1; /**< The derived gain, A1 = -Kp - 2Kd. */ + float32_t A2; /**< The derived gain, A2 = Kd . */ + float32_t state[3]; /**< The state array of length 3. */ + float32_t Kp; /**< The proportional gain. */ + float32_t Ki; /**< The integral gain. */ + float32_t Kd; /**< The derivative gain. */ + } arm_pid_instance_f32; + + + + /** + * @brief Initialization function for the floating-point PID Control. + * @param[in,out] S points to an instance of the PID structure. + * @param[in] resetStateFlag flag to reset the state. 0 = no change in state 1 = reset the state. + */ + void arm_pid_init_f32( + arm_pid_instance_f32 * S, + int32_t resetStateFlag); + + + /** + * @brief Reset function for the floating-point PID Control. + * @param[in,out] S is an instance of the floating-point PID Control structure + */ + void arm_pid_reset_f32( + arm_pid_instance_f32 * S); + + + /** + * @brief Initialization function for the Q31 PID Control. + * @param[in,out] S points to an instance of the Q15 PID structure. + * @param[in] resetStateFlag flag to reset the state. 0 = no change in state 1 = reset the state. + */ + void arm_pid_init_q31( + arm_pid_instance_q31 * S, + int32_t resetStateFlag); + + + /** + * @brief Reset function for the Q31 PID Control. + * @param[in,out] S points to an instance of the Q31 PID Control structure + */ + + void arm_pid_reset_q31( + arm_pid_instance_q31 * S); + + + /** + * @brief Initialization function for the Q15 PID Control. + * @param[in,out] S points to an instance of the Q15 PID structure. + * @param[in] resetStateFlag flag to reset the state. 0 = no change in state 1 = reset the state. + */ + void arm_pid_init_q15( + arm_pid_instance_q15 * S, + int32_t resetStateFlag); + + + /** + * @brief Reset function for the Q15 PID Control. + * @param[in,out] S points to an instance of the q15 PID Control structure + */ + void arm_pid_reset_q15( + arm_pid_instance_q15 * S); + + + /** + * @brief Instance structure for the floating-point Linear Interpolate function. + */ + typedef struct + { + uint32_t nValues; /**< nValues */ + float32_t x1; /**< x1 */ + float32_t xSpacing; /**< xSpacing */ + float32_t *pYData; /**< pointer to the table of Y values */ + } arm_linear_interp_instance_f32; + + /** + * @brief Instance structure for the floating-point bilinear interpolation function. + */ + typedef struct + { + uint16_t numRows; /**< number of rows in the data table. */ + uint16_t numCols; /**< number of columns in the data table. */ + float32_t *pData; /**< points to the data table. */ + } arm_bilinear_interp_instance_f32; + + /** + * @brief Instance structure for the Q31 bilinear interpolation function. + */ + typedef struct + { + uint16_t numRows; /**< number of rows in the data table. */ + uint16_t numCols; /**< number of columns in the data table. */ + q31_t *pData; /**< points to the data table. */ + } arm_bilinear_interp_instance_q31; + + /** + * @brief Instance structure for the Q15 bilinear interpolation function. + */ + typedef struct + { + uint16_t numRows; /**< number of rows in the data table. */ + uint16_t numCols; /**< number of columns in the data table. */ + q15_t *pData; /**< points to the data table. */ + } arm_bilinear_interp_instance_q15; + + /** + * @brief Instance structure for the Q15 bilinear interpolation function. + */ + typedef struct + { + uint16_t numRows; /**< number of rows in the data table. */ + uint16_t numCols; /**< number of columns in the data table. */ + q7_t *pData; /**< points to the data table. */ + } arm_bilinear_interp_instance_q7; + + + /** + * @brief Q7 vector multiplication. + * @param[in] pSrcA points to the first input vector + * @param[in] pSrcB points to the second input vector + * @param[out] pDst points to the output vector + * @param[in] blockSize number of samples in each vector + */ + void arm_mult_q7( + q7_t * pSrcA, + q7_t * pSrcB, + q7_t * pDst, + uint32_t blockSize); + + + /** + * @brief Q15 vector multiplication. + * @param[in] pSrcA points to the first input vector + * @param[in] pSrcB points to the second input vector + * @param[out] pDst points to the output vector + * @param[in] blockSize number of samples in each vector + */ + void arm_mult_q15( + q15_t * pSrcA, + q15_t * pSrcB, + q15_t * pDst, + uint32_t blockSize); + + + /** + * @brief Q31 vector multiplication. + * @param[in] pSrcA points to the first input vector + * @param[in] pSrcB points to the second input vector + * @param[out] pDst points to the output vector + * @param[in] blockSize number of samples in each vector + */ + void arm_mult_q31( + q31_t * pSrcA, + q31_t * pSrcB, + q31_t * pDst, + uint32_t blockSize); + + + /** + * @brief Floating-point vector multiplication. + * @param[in] pSrcA points to the first input vector + * @param[in] pSrcB points to the second input vector + * @param[out] pDst points to the output vector + * @param[in] blockSize number of samples in each vector + */ + void arm_mult_f32( + float32_t * pSrcA, + float32_t * pSrcB, + float32_t * pDst, + uint32_t blockSize); + + + /** + * @brief Instance structure for the Q15 CFFT/CIFFT function. + */ + typedef struct + { + uint16_t fftLen; /**< length of the FFT. */ + uint8_t ifftFlag; /**< flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. */ + uint8_t bitReverseFlag; /**< flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. */ + q15_t *pTwiddle; /**< points to the Sin twiddle factor table. */ + uint16_t *pBitRevTable; /**< points to the bit reversal table. */ + uint16_t twidCoefModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */ + uint16_t bitRevFactor; /**< bit reversal modifier that supports different size FFTs with the same bit reversal table. */ + } arm_cfft_radix2_instance_q15; + +/* Deprecated */ + arm_status arm_cfft_radix2_init_q15( + arm_cfft_radix2_instance_q15 * S, + uint16_t fftLen, + uint8_t ifftFlag, + uint8_t bitReverseFlag); + +/* Deprecated */ + void arm_cfft_radix2_q15( + const arm_cfft_radix2_instance_q15 * S, + q15_t * pSrc); + + + /** + * @brief Instance structure for the Q15 CFFT/CIFFT function. + */ + typedef struct + { + uint16_t fftLen; /**< length of the FFT. */ + uint8_t ifftFlag; /**< flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. */ + uint8_t bitReverseFlag; /**< flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. */ + q15_t *pTwiddle; /**< points to the twiddle factor table. */ + uint16_t *pBitRevTable; /**< points to the bit reversal table. */ + uint16_t twidCoefModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */ + uint16_t bitRevFactor; /**< bit reversal modifier that supports different size FFTs with the same bit reversal table. */ + } arm_cfft_radix4_instance_q15; + +/* Deprecated */ + arm_status arm_cfft_radix4_init_q15( + arm_cfft_radix4_instance_q15 * S, + uint16_t fftLen, + uint8_t ifftFlag, + uint8_t bitReverseFlag); + +/* Deprecated */ + void arm_cfft_radix4_q15( + const arm_cfft_radix4_instance_q15 * S, + q15_t * pSrc); + + /** + * @brief Instance structure for the Radix-2 Q31 CFFT/CIFFT function. + */ + typedef struct + { + uint16_t fftLen; /**< length of the FFT. */ + uint8_t ifftFlag; /**< flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. */ + uint8_t bitReverseFlag; /**< flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. */ + q31_t *pTwiddle; /**< points to the Twiddle factor table. */ + uint16_t *pBitRevTable; /**< points to the bit reversal table. */ + uint16_t twidCoefModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */ + uint16_t bitRevFactor; /**< bit reversal modifier that supports different size FFTs with the same bit reversal table. */ + } arm_cfft_radix2_instance_q31; + +/* Deprecated */ + arm_status arm_cfft_radix2_init_q31( + arm_cfft_radix2_instance_q31 * S, + uint16_t fftLen, + uint8_t ifftFlag, + uint8_t bitReverseFlag); + +/* Deprecated */ + void arm_cfft_radix2_q31( + const arm_cfft_radix2_instance_q31 * S, + q31_t * pSrc); + + /** + * @brief Instance structure for the Q31 CFFT/CIFFT function. + */ + typedef struct + { + uint16_t fftLen; /**< length of the FFT. */ + uint8_t ifftFlag; /**< flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. */ + uint8_t bitReverseFlag; /**< flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. */ + q31_t *pTwiddle; /**< points to the twiddle factor table. */ + uint16_t *pBitRevTable; /**< points to the bit reversal table. */ + uint16_t twidCoefModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */ + uint16_t bitRevFactor; /**< bit reversal modifier that supports different size FFTs with the same bit reversal table. */ + } arm_cfft_radix4_instance_q31; + +/* Deprecated */ + void arm_cfft_radix4_q31( + const arm_cfft_radix4_instance_q31 * S, + q31_t * pSrc); + +/* Deprecated */ + arm_status arm_cfft_radix4_init_q31( + arm_cfft_radix4_instance_q31 * S, + uint16_t fftLen, + uint8_t ifftFlag, + uint8_t bitReverseFlag); + + /** + * @brief Instance structure for the floating-point CFFT/CIFFT function. + */ + typedef struct + { + uint16_t fftLen; /**< length of the FFT. */ + uint8_t ifftFlag; /**< flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. */ + uint8_t bitReverseFlag; /**< flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. */ + float32_t *pTwiddle; /**< points to the Twiddle factor table. */ + uint16_t *pBitRevTable; /**< points to the bit reversal table. */ + uint16_t twidCoefModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */ + uint16_t bitRevFactor; /**< bit reversal modifier that supports different size FFTs with the same bit reversal table. */ + float32_t onebyfftLen; /**< value of 1/fftLen. */ + } arm_cfft_radix2_instance_f32; + +/* Deprecated */ + arm_status arm_cfft_radix2_init_f32( + arm_cfft_radix2_instance_f32 * S, + uint16_t fftLen, + uint8_t ifftFlag, + uint8_t bitReverseFlag); + +/* Deprecated */ + void arm_cfft_radix2_f32( + const arm_cfft_radix2_instance_f32 * S, + float32_t * pSrc); + + /** + * @brief Instance structure for the floating-point CFFT/CIFFT function. + */ + typedef struct + { + uint16_t fftLen; /**< length of the FFT. */ + uint8_t ifftFlag; /**< flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. */ + uint8_t bitReverseFlag; /**< flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. */ + float32_t *pTwiddle; /**< points to the Twiddle factor table. */ + uint16_t *pBitRevTable; /**< points to the bit reversal table. */ + uint16_t twidCoefModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */ + uint16_t bitRevFactor; /**< bit reversal modifier that supports different size FFTs with the same bit reversal table. */ + float32_t onebyfftLen; /**< value of 1/fftLen. */ + } arm_cfft_radix4_instance_f32; + +/* Deprecated */ + arm_status arm_cfft_radix4_init_f32( + arm_cfft_radix4_instance_f32 * S, + uint16_t fftLen, + uint8_t ifftFlag, + uint8_t bitReverseFlag); + +/* Deprecated */ + void arm_cfft_radix4_f32( + const arm_cfft_radix4_instance_f32 * S, + float32_t * pSrc); + + /** + * @brief Instance structure for the fixed-point CFFT/CIFFT function. + */ + typedef struct + { + uint16_t fftLen; /**< length of the FFT. */ + const q15_t *pTwiddle; /**< points to the Twiddle factor table. */ + const uint16_t *pBitRevTable; /**< points to the bit reversal table. */ + uint16_t bitRevLength; /**< bit reversal table length. */ + } arm_cfft_instance_q15; + +void arm_cfft_q15( + const arm_cfft_instance_q15 * S, + q15_t * p1, + uint8_t ifftFlag, + uint8_t bitReverseFlag); + + /** + * @brief Instance structure for the fixed-point CFFT/CIFFT function. + */ + typedef struct + { + uint16_t fftLen; /**< length of the FFT. */ + const q31_t *pTwiddle; /**< points to the Twiddle factor table. */ + const uint16_t *pBitRevTable; /**< points to the bit reversal table. */ + uint16_t bitRevLength; /**< bit reversal table length. */ + } arm_cfft_instance_q31; + +void arm_cfft_q31( + const arm_cfft_instance_q31 * S, + q31_t * p1, + uint8_t ifftFlag, + uint8_t bitReverseFlag); + + /** + * @brief Instance structure for the floating-point CFFT/CIFFT function. + */ + typedef struct + { + uint16_t fftLen; /**< length of the FFT. */ + const float32_t *pTwiddle; /**< points to the Twiddle factor table. */ + const uint16_t *pBitRevTable; /**< points to the bit reversal table. */ + uint16_t bitRevLength; /**< bit reversal table length. */ + } arm_cfft_instance_f32; + + void arm_cfft_f32( + const arm_cfft_instance_f32 * S, + float32_t * p1, + uint8_t ifftFlag, + uint8_t bitReverseFlag); + + /** + * @brief Instance structure for the Q15 RFFT/RIFFT function. + */ + typedef struct + { + uint32_t fftLenReal; /**< length of the real FFT. */ + uint8_t ifftFlagR; /**< flag that selects forward (ifftFlagR=0) or inverse (ifftFlagR=1) transform. */ + uint8_t bitReverseFlagR; /**< flag that enables (bitReverseFlagR=1) or disables (bitReverseFlagR=0) bit reversal of output. */ + uint32_t twidCoefRModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */ + q15_t *pTwiddleAReal; /**< points to the real twiddle factor table. */ + q15_t *pTwiddleBReal; /**< points to the imag twiddle factor table. */ + const arm_cfft_instance_q15 *pCfft; /**< points to the complex FFT instance. */ + } arm_rfft_instance_q15; + + arm_status arm_rfft_init_q15( + arm_rfft_instance_q15 * S, + uint32_t fftLenReal, + uint32_t ifftFlagR, + uint32_t bitReverseFlag); + + void arm_rfft_q15( + const arm_rfft_instance_q15 * S, + q15_t * pSrc, + q15_t * pDst); + + /** + * @brief Instance structure for the Q31 RFFT/RIFFT function. + */ + typedef struct + { + uint32_t fftLenReal; /**< length of the real FFT. */ + uint8_t ifftFlagR; /**< flag that selects forward (ifftFlagR=0) or inverse (ifftFlagR=1) transform. */ + uint8_t bitReverseFlagR; /**< flag that enables (bitReverseFlagR=1) or disables (bitReverseFlagR=0) bit reversal of output. */ + uint32_t twidCoefRModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */ + q31_t *pTwiddleAReal; /**< points to the real twiddle factor table. */ + q31_t *pTwiddleBReal; /**< points to the imag twiddle factor table. */ + const arm_cfft_instance_q31 *pCfft; /**< points to the complex FFT instance. */ + } arm_rfft_instance_q31; + + arm_status arm_rfft_init_q31( + arm_rfft_instance_q31 * S, + uint32_t fftLenReal, + uint32_t ifftFlagR, + uint32_t bitReverseFlag); + + void arm_rfft_q31( + const arm_rfft_instance_q31 * S, + q31_t * pSrc, + q31_t * pDst); + + /** + * @brief Instance structure for the floating-point RFFT/RIFFT function. + */ + typedef struct + { + uint32_t fftLenReal; /**< length of the real FFT. */ + uint16_t fftLenBy2; /**< length of the complex FFT. */ + uint8_t ifftFlagR; /**< flag that selects forward (ifftFlagR=0) or inverse (ifftFlagR=1) transform. */ + uint8_t bitReverseFlagR; /**< flag that enables (bitReverseFlagR=1) or disables (bitReverseFlagR=0) bit reversal of output. */ + uint32_t twidCoefRModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */ + float32_t *pTwiddleAReal; /**< points to the real twiddle factor table. */ + float32_t *pTwiddleBReal; /**< points to the imag twiddle factor table. */ + arm_cfft_radix4_instance_f32 *pCfft; /**< points to the complex FFT instance. */ + } arm_rfft_instance_f32; + + arm_status arm_rfft_init_f32( + arm_rfft_instance_f32 * S, + arm_cfft_radix4_instance_f32 * S_CFFT, + uint32_t fftLenReal, + uint32_t ifftFlagR, + uint32_t bitReverseFlag); + + void arm_rfft_f32( + const arm_rfft_instance_f32 * S, + float32_t * pSrc, + float32_t * pDst); + + /** + * @brief Instance structure for the floating-point RFFT/RIFFT function. + */ +typedef struct + { + arm_cfft_instance_f32 Sint; /**< Internal CFFT structure. */ + uint16_t fftLenRFFT; /**< length of the real sequence */ + float32_t * pTwiddleRFFT; /**< Twiddle factors real stage */ + } arm_rfft_fast_instance_f32 ; + +arm_status arm_rfft_fast_init_f32 ( + arm_rfft_fast_instance_f32 * S, + uint16_t fftLen); + +void arm_rfft_fast_f32( + arm_rfft_fast_instance_f32 * S, + float32_t * p, float32_t * pOut, + uint8_t ifftFlag); + + /** + * @brief Instance structure for the floating-point DCT4/IDCT4 function. + */ + typedef struct + { + uint16_t N; /**< length of the DCT4. */ + uint16_t Nby2; /**< half of the length of the DCT4. */ + float32_t normalize; /**< normalizing factor. */ + float32_t *pTwiddle; /**< points to the twiddle factor table. */ + float32_t *pCosFactor; /**< points to the cosFactor table. */ + arm_rfft_instance_f32 *pRfft; /**< points to the real FFT instance. */ + arm_cfft_radix4_instance_f32 *pCfft; /**< points to the complex FFT instance. */ + } arm_dct4_instance_f32; + + + /** + * @brief Initialization function for the floating-point DCT4/IDCT4. + * @param[in,out] S points to an instance of floating-point DCT4/IDCT4 structure. + * @param[in] S_RFFT points to an instance of floating-point RFFT/RIFFT structure. + * @param[in] S_CFFT points to an instance of floating-point CFFT/CIFFT structure. + * @param[in] N length of the DCT4. + * @param[in] Nby2 half of the length of the DCT4. + * @param[in] normalize normalizing factor. + * @return arm_status function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_ARGUMENT_ERROR if fftLenReal is not a supported transform length. + */ + arm_status arm_dct4_init_f32( + arm_dct4_instance_f32 * S, + arm_rfft_instance_f32 * S_RFFT, + arm_cfft_radix4_instance_f32 * S_CFFT, + uint16_t N, + uint16_t Nby2, + float32_t normalize); + + + /** + * @brief Processing function for the floating-point DCT4/IDCT4. + * @param[in] S points to an instance of the floating-point DCT4/IDCT4 structure. + * @param[in] pState points to state buffer. + * @param[in,out] pInlineBuffer points to the in-place input and output buffer. + */ + void arm_dct4_f32( + const arm_dct4_instance_f32 * S, + float32_t * pState, + float32_t * pInlineBuffer); + + + /** + * @brief Instance structure for the Q31 DCT4/IDCT4 function. + */ + typedef struct + { + uint16_t N; /**< length of the DCT4. */ + uint16_t Nby2; /**< half of the length of the DCT4. */ + q31_t normalize; /**< normalizing factor. */ + q31_t *pTwiddle; /**< points to the twiddle factor table. */ + q31_t *pCosFactor; /**< points to the cosFactor table. */ + arm_rfft_instance_q31 *pRfft; /**< points to the real FFT instance. */ + arm_cfft_radix4_instance_q31 *pCfft; /**< points to the complex FFT instance. */ + } arm_dct4_instance_q31; + + + /** + * @brief Initialization function for the Q31 DCT4/IDCT4. + * @param[in,out] S points to an instance of Q31 DCT4/IDCT4 structure. + * @param[in] S_RFFT points to an instance of Q31 RFFT/RIFFT structure + * @param[in] S_CFFT points to an instance of Q31 CFFT/CIFFT structure + * @param[in] N length of the DCT4. + * @param[in] Nby2 half of the length of the DCT4. + * @param[in] normalize normalizing factor. + * @return arm_status function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_ARGUMENT_ERROR if N is not a supported transform length. + */ + arm_status arm_dct4_init_q31( + arm_dct4_instance_q31 * S, + arm_rfft_instance_q31 * S_RFFT, + arm_cfft_radix4_instance_q31 * S_CFFT, + uint16_t N, + uint16_t Nby2, + q31_t normalize); + + + /** + * @brief Processing function for the Q31 DCT4/IDCT4. + * @param[in] S points to an instance of the Q31 DCT4 structure. + * @param[in] pState points to state buffer. + * @param[in,out] pInlineBuffer points to the in-place input and output buffer. + */ + void arm_dct4_q31( + const arm_dct4_instance_q31 * S, + q31_t * pState, + q31_t * pInlineBuffer); + + + /** + * @brief Instance structure for the Q15 DCT4/IDCT4 function. + */ + typedef struct + { + uint16_t N; /**< length of the DCT4. */ + uint16_t Nby2; /**< half of the length of the DCT4. */ + q15_t normalize; /**< normalizing factor. */ + q15_t *pTwiddle; /**< points to the twiddle factor table. */ + q15_t *pCosFactor; /**< points to the cosFactor table. */ + arm_rfft_instance_q15 *pRfft; /**< points to the real FFT instance. */ + arm_cfft_radix4_instance_q15 *pCfft; /**< points to the complex FFT instance. */ + } arm_dct4_instance_q15; + + + /** + * @brief Initialization function for the Q15 DCT4/IDCT4. + * @param[in,out] S points to an instance of Q15 DCT4/IDCT4 structure. + * @param[in] S_RFFT points to an instance of Q15 RFFT/RIFFT structure. + * @param[in] S_CFFT points to an instance of Q15 CFFT/CIFFT structure. + * @param[in] N length of the DCT4. + * @param[in] Nby2 half of the length of the DCT4. + * @param[in] normalize normalizing factor. + * @return arm_status function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_ARGUMENT_ERROR if N is not a supported transform length. + */ + arm_status arm_dct4_init_q15( + arm_dct4_instance_q15 * S, + arm_rfft_instance_q15 * S_RFFT, + arm_cfft_radix4_instance_q15 * S_CFFT, + uint16_t N, + uint16_t Nby2, + q15_t normalize); + + + /** + * @brief Processing function for the Q15 DCT4/IDCT4. + * @param[in] S points to an instance of the Q15 DCT4 structure. + * @param[in] pState points to state buffer. + * @param[in,out] pInlineBuffer points to the in-place input and output buffer. + */ + void arm_dct4_q15( + const arm_dct4_instance_q15 * S, + q15_t * pState, + q15_t * pInlineBuffer); + + + /** + * @brief Floating-point vector addition. + * @param[in] pSrcA points to the first input vector + * @param[in] pSrcB points to the second input vector + * @param[out] pDst points to the output vector + * @param[in] blockSize number of samples in each vector + */ + void arm_add_f32( + float32_t * pSrcA, + float32_t * pSrcB, + float32_t * pDst, + uint32_t blockSize); + + + /** + * @brief Q7 vector addition. + * @param[in] pSrcA points to the first input vector + * @param[in] pSrcB points to the second input vector + * @param[out] pDst points to the output vector + * @param[in] blockSize number of samples in each vector + */ + void arm_add_q7( + q7_t * pSrcA, + q7_t * pSrcB, + q7_t * pDst, + uint32_t blockSize); + + + /** + * @brief Q15 vector addition. + * @param[in] pSrcA points to the first input vector + * @param[in] pSrcB points to the second input vector + * @param[out] pDst points to the output vector + * @param[in] blockSize number of samples in each vector + */ + void arm_add_q15( + q15_t * pSrcA, + q15_t * pSrcB, + q15_t * pDst, + uint32_t blockSize); + + + /** + * @brief Q31 vector addition. + * @param[in] pSrcA points to the first input vector + * @param[in] pSrcB points to the second input vector + * @param[out] pDst points to the output vector + * @param[in] blockSize number of samples in each vector + */ + void arm_add_q31( + q31_t * pSrcA, + q31_t * pSrcB, + q31_t * pDst, + uint32_t blockSize); + + + /** + * @brief Floating-point vector subtraction. + * @param[in] pSrcA points to the first input vector + * @param[in] pSrcB points to the second input vector + * @param[out] pDst points to the output vector + * @param[in] blockSize number of samples in each vector + */ + void arm_sub_f32( + float32_t * pSrcA, + float32_t * pSrcB, + float32_t * pDst, + uint32_t blockSize); + + + /** + * @brief Q7 vector subtraction. + * @param[in] pSrcA points to the first input vector + * @param[in] pSrcB points to the second input vector + * @param[out] pDst points to the output vector + * @param[in] blockSize number of samples in each vector + */ + void arm_sub_q7( + q7_t * pSrcA, + q7_t * pSrcB, + q7_t * pDst, + uint32_t blockSize); + + + /** + * @brief Q15 vector subtraction. + * @param[in] pSrcA points to the first input vector + * @param[in] pSrcB points to the second input vector + * @param[out] pDst points to the output vector + * @param[in] blockSize number of samples in each vector + */ + void arm_sub_q15( + q15_t * pSrcA, + q15_t * pSrcB, + q15_t * pDst, + uint32_t blockSize); + + + /** + * @brief Q31 vector subtraction. + * @param[in] pSrcA points to the first input vector + * @param[in] pSrcB points to the second input vector + * @param[out] pDst points to the output vector + * @param[in] blockSize number of samples in each vector + */ + void arm_sub_q31( + q31_t * pSrcA, + q31_t * pSrcB, + q31_t * pDst, + uint32_t blockSize); + + + /** + * @brief Multiplies a floating-point vector by a scalar. + * @param[in] pSrc points to the input vector + * @param[in] scale scale factor to be applied + * @param[out] pDst points to the output vector + * @param[in] blockSize number of samples in the vector + */ + void arm_scale_f32( + float32_t * pSrc, + float32_t scale, + float32_t * pDst, + uint32_t blockSize); + + + /** + * @brief Multiplies a Q7 vector by a scalar. + * @param[in] pSrc points to the input vector + * @param[in] scaleFract fractional portion of the scale value + * @param[in] shift number of bits to shift the result by + * @param[out] pDst points to the output vector + * @param[in] blockSize number of samples in the vector + */ + void arm_scale_q7( + q7_t * pSrc, + q7_t scaleFract, + int8_t shift, + q7_t * pDst, + uint32_t blockSize); + + + /** + * @brief Multiplies a Q15 vector by a scalar. + * @param[in] pSrc points to the input vector + * @param[in] scaleFract fractional portion of the scale value + * @param[in] shift number of bits to shift the result by + * @param[out] pDst points to the output vector + * @param[in] blockSize number of samples in the vector + */ + void arm_scale_q15( + q15_t * pSrc, + q15_t scaleFract, + int8_t shift, + q15_t * pDst, + uint32_t blockSize); + + + /** + * @brief Multiplies a Q31 vector by a scalar. + * @param[in] pSrc points to the input vector + * @param[in] scaleFract fractional portion of the scale value + * @param[in] shift number of bits to shift the result by + * @param[out] pDst points to the output vector + * @param[in] blockSize number of samples in the vector + */ + void arm_scale_q31( + q31_t * pSrc, + q31_t scaleFract, + int8_t shift, + q31_t * pDst, + uint32_t blockSize); + + + /** + * @brief Q7 vector absolute value. + * @param[in] pSrc points to the input buffer + * @param[out] pDst points to the output buffer + * @param[in] blockSize number of samples in each vector + */ + void arm_abs_q7( + q7_t * pSrc, + q7_t * pDst, + uint32_t blockSize); + + + /** + * @brief Floating-point vector absolute value. + * @param[in] pSrc points to the input buffer + * @param[out] pDst points to the output buffer + * @param[in] blockSize number of samples in each vector + */ + void arm_abs_f32( + float32_t * pSrc, + float32_t * pDst, + uint32_t blockSize); + + + /** + * @brief Q15 vector absolute value. + * @param[in] pSrc points to the input buffer + * @param[out] pDst points to the output buffer + * @param[in] blockSize number of samples in each vector + */ + void arm_abs_q15( + q15_t * pSrc, + q15_t * pDst, + uint32_t blockSize); + + + /** + * @brief Q31 vector absolute value. + * @param[in] pSrc points to the input buffer + * @param[out] pDst points to the output buffer + * @param[in] blockSize number of samples in each vector + */ + void arm_abs_q31( + q31_t * pSrc, + q31_t * pDst, + uint32_t blockSize); + + + /** + * @brief Dot product of floating-point vectors. + * @param[in] pSrcA points to the first input vector + * @param[in] pSrcB points to the second input vector + * @param[in] blockSize number of samples in each vector + * @param[out] result output result returned here + */ + void arm_dot_prod_f32( + float32_t * pSrcA, + float32_t * pSrcB, + uint32_t blockSize, + float32_t * result); + + + /** + * @brief Dot product of Q7 vectors. + * @param[in] pSrcA points to the first input vector + * @param[in] pSrcB points to the second input vector + * @param[in] blockSize number of samples in each vector + * @param[out] result output result returned here + */ + void arm_dot_prod_q7( + q7_t * pSrcA, + q7_t * pSrcB, + uint32_t blockSize, + q31_t * result); + + + /** + * @brief Dot product of Q15 vectors. + * @param[in] pSrcA points to the first input vector + * @param[in] pSrcB points to the second input vector + * @param[in] blockSize number of samples in each vector + * @param[out] result output result returned here + */ + void arm_dot_prod_q15( + q15_t * pSrcA, + q15_t * pSrcB, + uint32_t blockSize, + q63_t * result); + + + /** + * @brief Dot product of Q31 vectors. + * @param[in] pSrcA points to the first input vector + * @param[in] pSrcB points to the second input vector + * @param[in] blockSize number of samples in each vector + * @param[out] result output result returned here + */ + void arm_dot_prod_q31( + q31_t * pSrcA, + q31_t * pSrcB, + uint32_t blockSize, + q63_t * result); + + + /** + * @brief Shifts the elements of a Q7 vector a specified number of bits. + * @param[in] pSrc points to the input vector + * @param[in] shiftBits number of bits to shift. A positive value shifts left; a negative value shifts right. + * @param[out] pDst points to the output vector + * @param[in] blockSize number of samples in the vector + */ + void arm_shift_q7( + q7_t * pSrc, + int8_t shiftBits, + q7_t * pDst, + uint32_t blockSize); + + + /** + * @brief Shifts the elements of a Q15 vector a specified number of bits. + * @param[in] pSrc points to the input vector + * @param[in] shiftBits number of bits to shift. A positive value shifts left; a negative value shifts right. + * @param[out] pDst points to the output vector + * @param[in] blockSize number of samples in the vector + */ + void arm_shift_q15( + q15_t * pSrc, + int8_t shiftBits, + q15_t * pDst, + uint32_t blockSize); + + + /** + * @brief Shifts the elements of a Q31 vector a specified number of bits. + * @param[in] pSrc points to the input vector + * @param[in] shiftBits number of bits to shift. A positive value shifts left; a negative value shifts right. + * @param[out] pDst points to the output vector + * @param[in] blockSize number of samples in the vector + */ + void arm_shift_q31( + q31_t * pSrc, + int8_t shiftBits, + q31_t * pDst, + uint32_t blockSize); + + + /** + * @brief Adds a constant offset to a floating-point vector. + * @param[in] pSrc points to the input vector + * @param[in] offset is the offset to be added + * @param[out] pDst points to the output vector + * @param[in] blockSize number of samples in the vector + */ + void arm_offset_f32( + float32_t * pSrc, + float32_t offset, + float32_t * pDst, + uint32_t blockSize); + + + /** + * @brief Adds a constant offset to a Q7 vector. + * @param[in] pSrc points to the input vector + * @param[in] offset is the offset to be added + * @param[out] pDst points to the output vector + * @param[in] blockSize number of samples in the vector + */ + void arm_offset_q7( + q7_t * pSrc, + q7_t offset, + q7_t * pDst, + uint32_t blockSize); + + + /** + * @brief Adds a constant offset to a Q15 vector. + * @param[in] pSrc points to the input vector + * @param[in] offset is the offset to be added + * @param[out] pDst points to the output vector + * @param[in] blockSize number of samples in the vector + */ + void arm_offset_q15( + q15_t * pSrc, + q15_t offset, + q15_t * pDst, + uint32_t blockSize); + + + /** + * @brief Adds a constant offset to a Q31 vector. + * @param[in] pSrc points to the input vector + * @param[in] offset is the offset to be added + * @param[out] pDst points to the output vector + * @param[in] blockSize number of samples in the vector + */ + void arm_offset_q31( + q31_t * pSrc, + q31_t offset, + q31_t * pDst, + uint32_t blockSize); + + + /** + * @brief Negates the elements of a floating-point vector. + * @param[in] pSrc points to the input vector + * @param[out] pDst points to the output vector + * @param[in] blockSize number of samples in the vector + */ + void arm_negate_f32( + float32_t * pSrc, + float32_t * pDst, + uint32_t blockSize); + + + /** + * @brief Negates the elements of a Q7 vector. + * @param[in] pSrc points to the input vector + * @param[out] pDst points to the output vector + * @param[in] blockSize number of samples in the vector + */ + void arm_negate_q7( + q7_t * pSrc, + q7_t * pDst, + uint32_t blockSize); + + + /** + * @brief Negates the elements of a Q15 vector. + * @param[in] pSrc points to the input vector + * @param[out] pDst points to the output vector + * @param[in] blockSize number of samples in the vector + */ + void arm_negate_q15( + q15_t * pSrc, + q15_t * pDst, + uint32_t blockSize); + + + /** + * @brief Negates the elements of a Q31 vector. + * @param[in] pSrc points to the input vector + * @param[out] pDst points to the output vector + * @param[in] blockSize number of samples in the vector + */ + void arm_negate_q31( + q31_t * pSrc, + q31_t * pDst, + uint32_t blockSize); + + + /** + * @brief Copies the elements of a floating-point vector. + * @param[in] pSrc input pointer + * @param[out] pDst output pointer + * @param[in] blockSize number of samples to process + */ + void arm_copy_f32( + float32_t * pSrc, + float32_t * pDst, + uint32_t blockSize); + + + /** + * @brief Copies the elements of a Q7 vector. + * @param[in] pSrc input pointer + * @param[out] pDst output pointer + * @param[in] blockSize number of samples to process + */ + void arm_copy_q7( + q7_t * pSrc, + q7_t * pDst, + uint32_t blockSize); + + + /** + * @brief Copies the elements of a Q15 vector. + * @param[in] pSrc input pointer + * @param[out] pDst output pointer + * @param[in] blockSize number of samples to process + */ + void arm_copy_q15( + q15_t * pSrc, + q15_t * pDst, + uint32_t blockSize); + + + /** + * @brief Copies the elements of a Q31 vector. + * @param[in] pSrc input pointer + * @param[out] pDst output pointer + * @param[in] blockSize number of samples to process + */ + void arm_copy_q31( + q31_t * pSrc, + q31_t * pDst, + uint32_t blockSize); + + + /** + * @brief Fills a constant value into a floating-point vector. + * @param[in] value input value to be filled + * @param[out] pDst output pointer + * @param[in] blockSize number of samples to process + */ + void arm_fill_f32( + float32_t value, + float32_t * pDst, + uint32_t blockSize); + + + /** + * @brief Fills a constant value into a Q7 vector. + * @param[in] value input value to be filled + * @param[out] pDst output pointer + * @param[in] blockSize number of samples to process + */ + void arm_fill_q7( + q7_t value, + q7_t * pDst, + uint32_t blockSize); + + + /** + * @brief Fills a constant value into a Q15 vector. + * @param[in] value input value to be filled + * @param[out] pDst output pointer + * @param[in] blockSize number of samples to process + */ + void arm_fill_q15( + q15_t value, + q15_t * pDst, + uint32_t blockSize); + + + /** + * @brief Fills a constant value into a Q31 vector. + * @param[in] value input value to be filled + * @param[out] pDst output pointer + * @param[in] blockSize number of samples to process + */ + void arm_fill_q31( + q31_t value, + q31_t * pDst, + uint32_t blockSize); + + +/** + * @brief Convolution of floating-point sequences. + * @param[in] pSrcA points to the first input sequence. + * @param[in] srcALen length of the first input sequence. + * @param[in] pSrcB points to the second input sequence. + * @param[in] srcBLen length of the second input sequence. + * @param[out] pDst points to the location where the output result is written. Length srcALen+srcBLen-1. + */ + void arm_conv_f32( + float32_t * pSrcA, + uint32_t srcALen, + float32_t * pSrcB, + uint32_t srcBLen, + float32_t * pDst); + + + /** + * @brief Convolution of Q15 sequences. + * @param[in] pSrcA points to the first input sequence. + * @param[in] srcALen length of the first input sequence. + * @param[in] pSrcB points to the second input sequence. + * @param[in] srcBLen length of the second input sequence. + * @param[out] pDst points to the block of output data Length srcALen+srcBLen-1. + * @param[in] pScratch1 points to scratch buffer of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2. + * @param[in] pScratch2 points to scratch buffer of size min(srcALen, srcBLen). + */ + void arm_conv_opt_q15( + q15_t * pSrcA, + uint32_t srcALen, + q15_t * pSrcB, + uint32_t srcBLen, + q15_t * pDst, + q15_t * pScratch1, + q15_t * pScratch2); + + +/** + * @brief Convolution of Q15 sequences. + * @param[in] pSrcA points to the first input sequence. + * @param[in] srcALen length of the first input sequence. + * @param[in] pSrcB points to the second input sequence. + * @param[in] srcBLen length of the second input sequence. + * @param[out] pDst points to the location where the output result is written. Length srcALen+srcBLen-1. + */ + void arm_conv_q15( + q15_t * pSrcA, + uint32_t srcALen, + q15_t * pSrcB, + uint32_t srcBLen, + q15_t * pDst); + + + /** + * @brief Convolution of Q15 sequences (fast version) for Cortex-M3 and Cortex-M4 + * @param[in] pSrcA points to the first input sequence. + * @param[in] srcALen length of the first input sequence. + * @param[in] pSrcB points to the second input sequence. + * @param[in] srcBLen length of the second input sequence. + * @param[out] pDst points to the block of output data Length srcALen+srcBLen-1. + */ + void arm_conv_fast_q15( + q15_t * pSrcA, + uint32_t srcALen, + q15_t * pSrcB, + uint32_t srcBLen, + q15_t * pDst); + + + /** + * @brief Convolution of Q15 sequences (fast version) for Cortex-M3 and Cortex-M4 + * @param[in] pSrcA points to the first input sequence. + * @param[in] srcALen length of the first input sequence. + * @param[in] pSrcB points to the second input sequence. + * @param[in] srcBLen length of the second input sequence. + * @param[out] pDst points to the block of output data Length srcALen+srcBLen-1. + * @param[in] pScratch1 points to scratch buffer of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2. + * @param[in] pScratch2 points to scratch buffer of size min(srcALen, srcBLen). + */ + void arm_conv_fast_opt_q15( + q15_t * pSrcA, + uint32_t srcALen, + q15_t * pSrcB, + uint32_t srcBLen, + q15_t * pDst, + q15_t * pScratch1, + q15_t * pScratch2); + + + /** + * @brief Convolution of Q31 sequences. + * @param[in] pSrcA points to the first input sequence. + * @param[in] srcALen length of the first input sequence. + * @param[in] pSrcB points to the second input sequence. + * @param[in] srcBLen length of the second input sequence. + * @param[out] pDst points to the block of output data Length srcALen+srcBLen-1. + */ + void arm_conv_q31( + q31_t * pSrcA, + uint32_t srcALen, + q31_t * pSrcB, + uint32_t srcBLen, + q31_t * pDst); + + + /** + * @brief Convolution of Q31 sequences (fast version) for Cortex-M3 and Cortex-M4 + * @param[in] pSrcA points to the first input sequence. + * @param[in] srcALen length of the first input sequence. + * @param[in] pSrcB points to the second input sequence. + * @param[in] srcBLen length of the second input sequence. + * @param[out] pDst points to the block of output data Length srcALen+srcBLen-1. + */ + void arm_conv_fast_q31( + q31_t * pSrcA, + uint32_t srcALen, + q31_t * pSrcB, + uint32_t srcBLen, + q31_t * pDst); + + + /** + * @brief Convolution of Q7 sequences. + * @param[in] pSrcA points to the first input sequence. + * @param[in] srcALen length of the first input sequence. + * @param[in] pSrcB points to the second input sequence. + * @param[in] srcBLen length of the second input sequence. + * @param[out] pDst points to the block of output data Length srcALen+srcBLen-1. + * @param[in] pScratch1 points to scratch buffer(of type q15_t) of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2. + * @param[in] pScratch2 points to scratch buffer (of type q15_t) of size min(srcALen, srcBLen). + */ + void arm_conv_opt_q7( + q7_t * pSrcA, + uint32_t srcALen, + q7_t * pSrcB, + uint32_t srcBLen, + q7_t * pDst, + q15_t * pScratch1, + q15_t * pScratch2); + + + /** + * @brief Convolution of Q7 sequences. + * @param[in] pSrcA points to the first input sequence. + * @param[in] srcALen length of the first input sequence. + * @param[in] pSrcB points to the second input sequence. + * @param[in] srcBLen length of the second input sequence. + * @param[out] pDst points to the block of output data Length srcALen+srcBLen-1. + */ + void arm_conv_q7( + q7_t * pSrcA, + uint32_t srcALen, + q7_t * pSrcB, + uint32_t srcBLen, + q7_t * pDst); + + + /** + * @brief Partial convolution of floating-point sequences. + * @param[in] pSrcA points to the first input sequence. + * @param[in] srcALen length of the first input sequence. + * @param[in] pSrcB points to the second input sequence. + * @param[in] srcBLen length of the second input sequence. + * @param[out] pDst points to the block of output data + * @param[in] firstIndex is the first output sample to start with. + * @param[in] numPoints is the number of output points to be computed. + * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2]. + */ + arm_status arm_conv_partial_f32( + float32_t * pSrcA, + uint32_t srcALen, + float32_t * pSrcB, + uint32_t srcBLen, + float32_t * pDst, + uint32_t firstIndex, + uint32_t numPoints); + + + /** + * @brief Partial convolution of Q15 sequences. + * @param[in] pSrcA points to the first input sequence. + * @param[in] srcALen length of the first input sequence. + * @param[in] pSrcB points to the second input sequence. + * @param[in] srcBLen length of the second input sequence. + * @param[out] pDst points to the block of output data + * @param[in] firstIndex is the first output sample to start with. + * @param[in] numPoints is the number of output points to be computed. + * @param[in] pScratch1 points to scratch buffer of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2. + * @param[in] pScratch2 points to scratch buffer of size min(srcALen, srcBLen). + * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2]. + */ + arm_status arm_conv_partial_opt_q15( + q15_t * pSrcA, + uint32_t srcALen, + q15_t * pSrcB, + uint32_t srcBLen, + q15_t * pDst, + uint32_t firstIndex, + uint32_t numPoints, + q15_t * pScratch1, + q15_t * pScratch2); + + + /** + * @brief Partial convolution of Q15 sequences. + * @param[in] pSrcA points to the first input sequence. + * @param[in] srcALen length of the first input sequence. + * @param[in] pSrcB points to the second input sequence. + * @param[in] srcBLen length of the second input sequence. + * @param[out] pDst points to the block of output data + * @param[in] firstIndex is the first output sample to start with. + * @param[in] numPoints is the number of output points to be computed. + * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2]. + */ + arm_status arm_conv_partial_q15( + q15_t * pSrcA, + uint32_t srcALen, + q15_t * pSrcB, + uint32_t srcBLen, + q15_t * pDst, + uint32_t firstIndex, + uint32_t numPoints); + + + /** + * @brief Partial convolution of Q15 sequences (fast version) for Cortex-M3 and Cortex-M4 + * @param[in] pSrcA points to the first input sequence. + * @param[in] srcALen length of the first input sequence. + * @param[in] pSrcB points to the second input sequence. + * @param[in] srcBLen length of the second input sequence. + * @param[out] pDst points to the block of output data + * @param[in] firstIndex is the first output sample to start with. + * @param[in] numPoints is the number of output points to be computed. + * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2]. + */ + arm_status arm_conv_partial_fast_q15( + q15_t * pSrcA, + uint32_t srcALen, + q15_t * pSrcB, + uint32_t srcBLen, + q15_t * pDst, + uint32_t firstIndex, + uint32_t numPoints); + + + /** + * @brief Partial convolution of Q15 sequences (fast version) for Cortex-M3 and Cortex-M4 + * @param[in] pSrcA points to the first input sequence. + * @param[in] srcALen length of the first input sequence. + * @param[in] pSrcB points to the second input sequence. + * @param[in] srcBLen length of the second input sequence. + * @param[out] pDst points to the block of output data + * @param[in] firstIndex is the first output sample to start with. + * @param[in] numPoints is the number of output points to be computed. + * @param[in] pScratch1 points to scratch buffer of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2. + * @param[in] pScratch2 points to scratch buffer of size min(srcALen, srcBLen). + * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2]. + */ + arm_status arm_conv_partial_fast_opt_q15( + q15_t * pSrcA, + uint32_t srcALen, + q15_t * pSrcB, + uint32_t srcBLen, + q15_t * pDst, + uint32_t firstIndex, + uint32_t numPoints, + q15_t * pScratch1, + q15_t * pScratch2); + + + /** + * @brief Partial convolution of Q31 sequences. + * @param[in] pSrcA points to the first input sequence. + * @param[in] srcALen length of the first input sequence. + * @param[in] pSrcB points to the second input sequence. + * @param[in] srcBLen length of the second input sequence. + * @param[out] pDst points to the block of output data + * @param[in] firstIndex is the first output sample to start with. + * @param[in] numPoints is the number of output points to be computed. + * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2]. + */ + arm_status arm_conv_partial_q31( + q31_t * pSrcA, + uint32_t srcALen, + q31_t * pSrcB, + uint32_t srcBLen, + q31_t * pDst, + uint32_t firstIndex, + uint32_t numPoints); + + + /** + * @brief Partial convolution of Q31 sequences (fast version) for Cortex-M3 and Cortex-M4 + * @param[in] pSrcA points to the first input sequence. + * @param[in] srcALen length of the first input sequence. + * @param[in] pSrcB points to the second input sequence. + * @param[in] srcBLen length of the second input sequence. + * @param[out] pDst points to the block of output data + * @param[in] firstIndex is the first output sample to start with. + * @param[in] numPoints is the number of output points to be computed. + * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2]. + */ + arm_status arm_conv_partial_fast_q31( + q31_t * pSrcA, + uint32_t srcALen, + q31_t * pSrcB, + uint32_t srcBLen, + q31_t * pDst, + uint32_t firstIndex, + uint32_t numPoints); + + + /** + * @brief Partial convolution of Q7 sequences + * @param[in] pSrcA points to the first input sequence. + * @param[in] srcALen length of the first input sequence. + * @param[in] pSrcB points to the second input sequence. + * @param[in] srcBLen length of the second input sequence. + * @param[out] pDst points to the block of output data + * @param[in] firstIndex is the first output sample to start with. + * @param[in] numPoints is the number of output points to be computed. + * @param[in] pScratch1 points to scratch buffer(of type q15_t) of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2. + * @param[in] pScratch2 points to scratch buffer (of type q15_t) of size min(srcALen, srcBLen). + * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2]. + */ + arm_status arm_conv_partial_opt_q7( + q7_t * pSrcA, + uint32_t srcALen, + q7_t * pSrcB, + uint32_t srcBLen, + q7_t * pDst, + uint32_t firstIndex, + uint32_t numPoints, + q15_t * pScratch1, + q15_t * pScratch2); + + +/** + * @brief Partial convolution of Q7 sequences. + * @param[in] pSrcA points to the first input sequence. + * @param[in] srcALen length of the first input sequence. + * @param[in] pSrcB points to the second input sequence. + * @param[in] srcBLen length of the second input sequence. + * @param[out] pDst points to the block of output data + * @param[in] firstIndex is the first output sample to start with. + * @param[in] numPoints is the number of output points to be computed. + * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2]. + */ + arm_status arm_conv_partial_q7( + q7_t * pSrcA, + uint32_t srcALen, + q7_t * pSrcB, + uint32_t srcBLen, + q7_t * pDst, + uint32_t firstIndex, + uint32_t numPoints); + + + /** + * @brief Instance structure for the Q15 FIR decimator. + */ + typedef struct + { + uint8_t M; /**< decimation factor. */ + uint16_t numTaps; /**< number of coefficients in the filter. */ + q15_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/ + q15_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */ + } arm_fir_decimate_instance_q15; + + /** + * @brief Instance structure for the Q31 FIR decimator. + */ + typedef struct + { + uint8_t M; /**< decimation factor. */ + uint16_t numTaps; /**< number of coefficients in the filter. */ + q31_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/ + q31_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */ + } arm_fir_decimate_instance_q31; + + /** + * @brief Instance structure for the floating-point FIR decimator. + */ + typedef struct + { + uint8_t M; /**< decimation factor. */ + uint16_t numTaps; /**< number of coefficients in the filter. */ + float32_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/ + float32_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */ + } arm_fir_decimate_instance_f32; + + + /** + * @brief Processing function for the floating-point FIR decimator. + * @param[in] S points to an instance of the floating-point FIR decimator structure. + * @param[in] pSrc points to the block of input data. + * @param[out] pDst points to the block of output data + * @param[in] blockSize number of input samples to process per call. + */ + void arm_fir_decimate_f32( + const arm_fir_decimate_instance_f32 * S, + float32_t * pSrc, + float32_t * pDst, + uint32_t blockSize); + + + /** + * @brief Initialization function for the floating-point FIR decimator. + * @param[in,out] S points to an instance of the floating-point FIR decimator structure. + * @param[in] numTaps number of coefficients in the filter. + * @param[in] M decimation factor. + * @param[in] pCoeffs points to the filter coefficients. + * @param[in] pState points to the state buffer. + * @param[in] blockSize number of input samples to process per call. + * @return The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_LENGTH_ERROR if + * blockSize is not a multiple of M. + */ + arm_status arm_fir_decimate_init_f32( + arm_fir_decimate_instance_f32 * S, + uint16_t numTaps, + uint8_t M, + float32_t * pCoeffs, + float32_t * pState, + uint32_t blockSize); + + + /** + * @brief Processing function for the Q15 FIR decimator. + * @param[in] S points to an instance of the Q15 FIR decimator structure. + * @param[in] pSrc points to the block of input data. + * @param[out] pDst points to the block of output data + * @param[in] blockSize number of input samples to process per call. + */ + void arm_fir_decimate_q15( + const arm_fir_decimate_instance_q15 * S, + q15_t * pSrc, + q15_t * pDst, + uint32_t blockSize); + + + /** + * @brief Processing function for the Q15 FIR decimator (fast variant) for Cortex-M3 and Cortex-M4. + * @param[in] S points to an instance of the Q15 FIR decimator structure. + * @param[in] pSrc points to the block of input data. + * @param[out] pDst points to the block of output data + * @param[in] blockSize number of input samples to process per call. + */ + void arm_fir_decimate_fast_q15( + const arm_fir_decimate_instance_q15 * S, + q15_t * pSrc, + q15_t * pDst, + uint32_t blockSize); + + + /** + * @brief Initialization function for the Q15 FIR decimator. + * @param[in,out] S points to an instance of the Q15 FIR decimator structure. + * @param[in] numTaps number of coefficients in the filter. + * @param[in] M decimation factor. + * @param[in] pCoeffs points to the filter coefficients. + * @param[in] pState points to the state buffer. + * @param[in] blockSize number of input samples to process per call. + * @return The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_LENGTH_ERROR if + * blockSize is not a multiple of M. + */ + arm_status arm_fir_decimate_init_q15( + arm_fir_decimate_instance_q15 * S, + uint16_t numTaps, + uint8_t M, + q15_t * pCoeffs, + q15_t * pState, + uint32_t blockSize); + + + /** + * @brief Processing function for the Q31 FIR decimator. + * @param[in] S points to an instance of the Q31 FIR decimator structure. + * @param[in] pSrc points to the block of input data. + * @param[out] pDst points to the block of output data + * @param[in] blockSize number of input samples to process per call. + */ + void arm_fir_decimate_q31( + const arm_fir_decimate_instance_q31 * S, + q31_t * pSrc, + q31_t * pDst, + uint32_t blockSize); + + /** + * @brief Processing function for the Q31 FIR decimator (fast variant) for Cortex-M3 and Cortex-M4. + * @param[in] S points to an instance of the Q31 FIR decimator structure. + * @param[in] pSrc points to the block of input data. + * @param[out] pDst points to the block of output data + * @param[in] blockSize number of input samples to process per call. + */ + void arm_fir_decimate_fast_q31( + arm_fir_decimate_instance_q31 * S, + q31_t * pSrc, + q31_t * pDst, + uint32_t blockSize); + + + /** + * @brief Initialization function for the Q31 FIR decimator. + * @param[in,out] S points to an instance of the Q31 FIR decimator structure. + * @param[in] numTaps number of coefficients in the filter. + * @param[in] M decimation factor. + * @param[in] pCoeffs points to the filter coefficients. + * @param[in] pState points to the state buffer. + * @param[in] blockSize number of input samples to process per call. + * @return The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_LENGTH_ERROR if + * blockSize is not a multiple of M. + */ + arm_status arm_fir_decimate_init_q31( + arm_fir_decimate_instance_q31 * S, + uint16_t numTaps, + uint8_t M, + q31_t * pCoeffs, + q31_t * pState, + uint32_t blockSize); + + + /** + * @brief Instance structure for the Q15 FIR interpolator. + */ + typedef struct + { + uint8_t L; /**< upsample factor. */ + uint16_t phaseLength; /**< length of each polyphase filter component. */ + q15_t *pCoeffs; /**< points to the coefficient array. The array is of length L*phaseLength. */ + q15_t *pState; /**< points to the state variable array. The array is of length blockSize+phaseLength-1. */ + } arm_fir_interpolate_instance_q15; + + /** + * @brief Instance structure for the Q31 FIR interpolator. + */ + typedef struct + { + uint8_t L; /**< upsample factor. */ + uint16_t phaseLength; /**< length of each polyphase filter component. */ + q31_t *pCoeffs; /**< points to the coefficient array. The array is of length L*phaseLength. */ + q31_t *pState; /**< points to the state variable array. The array is of length blockSize+phaseLength-1. */ + } arm_fir_interpolate_instance_q31; + + /** + * @brief Instance structure for the floating-point FIR interpolator. + */ + typedef struct + { + uint8_t L; /**< upsample factor. */ + uint16_t phaseLength; /**< length of each polyphase filter component. */ + float32_t *pCoeffs; /**< points to the coefficient array. The array is of length L*phaseLength. */ + float32_t *pState; /**< points to the state variable array. The array is of length phaseLength+numTaps-1. */ + } arm_fir_interpolate_instance_f32; + + + /** + * @brief Processing function for the Q15 FIR interpolator. + * @param[in] S points to an instance of the Q15 FIR interpolator structure. + * @param[in] pSrc points to the block of input data. + * @param[out] pDst points to the block of output data. + * @param[in] blockSize number of input samples to process per call. + */ + void arm_fir_interpolate_q15( + const arm_fir_interpolate_instance_q15 * S, + q15_t * pSrc, + q15_t * pDst, + uint32_t blockSize); + + + /** + * @brief Initialization function for the Q15 FIR interpolator. + * @param[in,out] S points to an instance of the Q15 FIR interpolator structure. + * @param[in] L upsample factor. + * @param[in] numTaps number of filter coefficients in the filter. + * @param[in] pCoeffs points to the filter coefficient buffer. + * @param[in] pState points to the state buffer. + * @param[in] blockSize number of input samples to process per call. + * @return The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_LENGTH_ERROR if + * the filter length numTaps is not a multiple of the interpolation factor L. + */ + arm_status arm_fir_interpolate_init_q15( + arm_fir_interpolate_instance_q15 * S, + uint8_t L, + uint16_t numTaps, + q15_t * pCoeffs, + q15_t * pState, + uint32_t blockSize); + + + /** + * @brief Processing function for the Q31 FIR interpolator. + * @param[in] S points to an instance of the Q15 FIR interpolator structure. + * @param[in] pSrc points to the block of input data. + * @param[out] pDst points to the block of output data. + * @param[in] blockSize number of input samples to process per call. + */ + void arm_fir_interpolate_q31( + const arm_fir_interpolate_instance_q31 * S, + q31_t * pSrc, + q31_t * pDst, + uint32_t blockSize); + + + /** + * @brief Initialization function for the Q31 FIR interpolator. + * @param[in,out] S points to an instance of the Q31 FIR interpolator structure. + * @param[in] L upsample factor. + * @param[in] numTaps number of filter coefficients in the filter. + * @param[in] pCoeffs points to the filter coefficient buffer. + * @param[in] pState points to the state buffer. + * @param[in] blockSize number of input samples to process per call. + * @return The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_LENGTH_ERROR if + * the filter length numTaps is not a multiple of the interpolation factor L. + */ + arm_status arm_fir_interpolate_init_q31( + arm_fir_interpolate_instance_q31 * S, + uint8_t L, + uint16_t numTaps, + q31_t * pCoeffs, + q31_t * pState, + uint32_t blockSize); + + + /** + * @brief Processing function for the floating-point FIR interpolator. + * @param[in] S points to an instance of the floating-point FIR interpolator structure. + * @param[in] pSrc points to the block of input data. + * @param[out] pDst points to the block of output data. + * @param[in] blockSize number of input samples to process per call. + */ + void arm_fir_interpolate_f32( + const arm_fir_interpolate_instance_f32 * S, + float32_t * pSrc, + float32_t * pDst, + uint32_t blockSize); + + + /** + * @brief Initialization function for the floating-point FIR interpolator. + * @param[in,out] S points to an instance of the floating-point FIR interpolator structure. + * @param[in] L upsample factor. + * @param[in] numTaps number of filter coefficients in the filter. + * @param[in] pCoeffs points to the filter coefficient buffer. + * @param[in] pState points to the state buffer. + * @param[in] blockSize number of input samples to process per call. + * @return The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_LENGTH_ERROR if + * the filter length numTaps is not a multiple of the interpolation factor L. + */ + arm_status arm_fir_interpolate_init_f32( + arm_fir_interpolate_instance_f32 * S, + uint8_t L, + uint16_t numTaps, + float32_t * pCoeffs, + float32_t * pState, + uint32_t blockSize); + + + /** + * @brief Instance structure for the high precision Q31 Biquad cascade filter. + */ + typedef struct + { + uint8_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */ + q63_t *pState; /**< points to the array of state coefficients. The array is of length 4*numStages. */ + q31_t *pCoeffs; /**< points to the array of coefficients. The array is of length 5*numStages. */ + uint8_t postShift; /**< additional shift, in bits, applied to each output sample. */ + } arm_biquad_cas_df1_32x64_ins_q31; + + + /** + * @param[in] S points to an instance of the high precision Q31 Biquad cascade filter structure. + * @param[in] pSrc points to the block of input data. + * @param[out] pDst points to the block of output data + * @param[in] blockSize number of samples to process. + */ + void arm_biquad_cas_df1_32x64_q31( + const arm_biquad_cas_df1_32x64_ins_q31 * S, + q31_t * pSrc, + q31_t * pDst, + uint32_t blockSize); + + + /** + * @param[in,out] S points to an instance of the high precision Q31 Biquad cascade filter structure. + * @param[in] numStages number of 2nd order stages in the filter. + * @param[in] pCoeffs points to the filter coefficients. + * @param[in] pState points to the state buffer. + * @param[in] postShift shift to be applied to the output. Varies according to the coefficients format + */ + void arm_biquad_cas_df1_32x64_init_q31( + arm_biquad_cas_df1_32x64_ins_q31 * S, + uint8_t numStages, + q31_t * pCoeffs, + q63_t * pState, + uint8_t postShift); + + + /** + * @brief Instance structure for the floating-point transposed direct form II Biquad cascade filter. + */ + typedef struct + { + uint8_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */ + float32_t *pState; /**< points to the array of state coefficients. The array is of length 2*numStages. */ + float32_t *pCoeffs; /**< points to the array of coefficients. The array is of length 5*numStages. */ + } arm_biquad_cascade_df2T_instance_f32; + + /** + * @brief Instance structure for the floating-point transposed direct form II Biquad cascade filter. + */ + typedef struct + { + uint8_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */ + float32_t *pState; /**< points to the array of state coefficients. The array is of length 4*numStages. */ + float32_t *pCoeffs; /**< points to the array of coefficients. The array is of length 5*numStages. */ + } arm_biquad_cascade_stereo_df2T_instance_f32; + + /** + * @brief Instance structure for the floating-point transposed direct form II Biquad cascade filter. + */ + typedef struct + { + uint8_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */ + float64_t *pState; /**< points to the array of state coefficients. The array is of length 2*numStages. */ + float64_t *pCoeffs; /**< points to the array of coefficients. The array is of length 5*numStages. */ + } arm_biquad_cascade_df2T_instance_f64; + + + /** + * @brief Processing function for the floating-point transposed direct form II Biquad cascade filter. + * @param[in] S points to an instance of the filter data structure. + * @param[in] pSrc points to the block of input data. + * @param[out] pDst points to the block of output data + * @param[in] blockSize number of samples to process. + */ + void arm_biquad_cascade_df2T_f32( + const arm_biquad_cascade_df2T_instance_f32 * S, + float32_t * pSrc, + float32_t * pDst, + uint32_t blockSize); + + + /** + * @brief Processing function for the floating-point transposed direct form II Biquad cascade filter. 2 channels + * @param[in] S points to an instance of the filter data structure. + * @param[in] pSrc points to the block of input data. + * @param[out] pDst points to the block of output data + * @param[in] blockSize number of samples to process. + */ + void arm_biquad_cascade_stereo_df2T_f32( + const arm_biquad_cascade_stereo_df2T_instance_f32 * S, + float32_t * pSrc, + float32_t * pDst, + uint32_t blockSize); + + + /** + * @brief Processing function for the floating-point transposed direct form II Biquad cascade filter. + * @param[in] S points to an instance of the filter data structure. + * @param[in] pSrc points to the block of input data. + * @param[out] pDst points to the block of output data + * @param[in] blockSize number of samples to process. + */ + void arm_biquad_cascade_df2T_f64( + const arm_biquad_cascade_df2T_instance_f64 * S, + float64_t * pSrc, + float64_t * pDst, + uint32_t blockSize); + + + /** + * @brief Initialization function for the floating-point transposed direct form II Biquad cascade filter. + * @param[in,out] S points to an instance of the filter data structure. + * @param[in] numStages number of 2nd order stages in the filter. + * @param[in] pCoeffs points to the filter coefficients. + * @param[in] pState points to the state buffer. + */ + void arm_biquad_cascade_df2T_init_f32( + arm_biquad_cascade_df2T_instance_f32 * S, + uint8_t numStages, + float32_t * pCoeffs, + float32_t * pState); + + + /** + * @brief Initialization function for the floating-point transposed direct form II Biquad cascade filter. + * @param[in,out] S points to an instance of the filter data structure. + * @param[in] numStages number of 2nd order stages in the filter. + * @param[in] pCoeffs points to the filter coefficients. + * @param[in] pState points to the state buffer. + */ + void arm_biquad_cascade_stereo_df2T_init_f32( + arm_biquad_cascade_stereo_df2T_instance_f32 * S, + uint8_t numStages, + float32_t * pCoeffs, + float32_t * pState); + + + /** + * @brief Initialization function for the floating-point transposed direct form II Biquad cascade filter. + * @param[in,out] S points to an instance of the filter data structure. + * @param[in] numStages number of 2nd order stages in the filter. + * @param[in] pCoeffs points to the filter coefficients. + * @param[in] pState points to the state buffer. + */ + void arm_biquad_cascade_df2T_init_f64( + arm_biquad_cascade_df2T_instance_f64 * S, + uint8_t numStages, + float64_t * pCoeffs, + float64_t * pState); + + + /** + * @brief Instance structure for the Q15 FIR lattice filter. + */ + typedef struct + { + uint16_t numStages; /**< number of filter stages. */ + q15_t *pState; /**< points to the state variable array. The array is of length numStages. */ + q15_t *pCoeffs; /**< points to the coefficient array. The array is of length numStages. */ + } arm_fir_lattice_instance_q15; + + /** + * @brief Instance structure for the Q31 FIR lattice filter. + */ + typedef struct + { + uint16_t numStages; /**< number of filter stages. */ + q31_t *pState; /**< points to the state variable array. The array is of length numStages. */ + q31_t *pCoeffs; /**< points to the coefficient array. The array is of length numStages. */ + } arm_fir_lattice_instance_q31; + + /** + * @brief Instance structure for the floating-point FIR lattice filter. + */ + typedef struct + { + uint16_t numStages; /**< number of filter stages. */ + float32_t *pState; /**< points to the state variable array. The array is of length numStages. */ + float32_t *pCoeffs; /**< points to the coefficient array. The array is of length numStages. */ + } arm_fir_lattice_instance_f32; + + + /** + * @brief Initialization function for the Q15 FIR lattice filter. + * @param[in] S points to an instance of the Q15 FIR lattice structure. + * @param[in] numStages number of filter stages. + * @param[in] pCoeffs points to the coefficient buffer. The array is of length numStages. + * @param[in] pState points to the state buffer. The array is of length numStages. + */ + void arm_fir_lattice_init_q15( + arm_fir_lattice_instance_q15 * S, + uint16_t numStages, + q15_t * pCoeffs, + q15_t * pState); + + + /** + * @brief Processing function for the Q15 FIR lattice filter. + * @param[in] S points to an instance of the Q15 FIR lattice structure. + * @param[in] pSrc points to the block of input data. + * @param[out] pDst points to the block of output data. + * @param[in] blockSize number of samples to process. + */ + void arm_fir_lattice_q15( + const arm_fir_lattice_instance_q15 * S, + q15_t * pSrc, + q15_t * pDst, + uint32_t blockSize); + + + /** + * @brief Initialization function for the Q31 FIR lattice filter. + * @param[in] S points to an instance of the Q31 FIR lattice structure. + * @param[in] numStages number of filter stages. + * @param[in] pCoeffs points to the coefficient buffer. The array is of length numStages. + * @param[in] pState points to the state buffer. The array is of length numStages. + */ + void arm_fir_lattice_init_q31( + arm_fir_lattice_instance_q31 * S, + uint16_t numStages, + q31_t * pCoeffs, + q31_t * pState); + + + /** + * @brief Processing function for the Q31 FIR lattice filter. + * @param[in] S points to an instance of the Q31 FIR lattice structure. + * @param[in] pSrc points to the block of input data. + * @param[out] pDst points to the block of output data + * @param[in] blockSize number of samples to process. + */ + void arm_fir_lattice_q31( + const arm_fir_lattice_instance_q31 * S, + q31_t * pSrc, + q31_t * pDst, + uint32_t blockSize); + + +/** + * @brief Initialization function for the floating-point FIR lattice filter. + * @param[in] S points to an instance of the floating-point FIR lattice structure. + * @param[in] numStages number of filter stages. + * @param[in] pCoeffs points to the coefficient buffer. The array is of length numStages. + * @param[in] pState points to the state buffer. The array is of length numStages. + */ + void arm_fir_lattice_init_f32( + arm_fir_lattice_instance_f32 * S, + uint16_t numStages, + float32_t * pCoeffs, + float32_t * pState); + + + /** + * @brief Processing function for the floating-point FIR lattice filter. + * @param[in] S points to an instance of the floating-point FIR lattice structure. + * @param[in] pSrc points to the block of input data. + * @param[out] pDst points to the block of output data + * @param[in] blockSize number of samples to process. + */ + void arm_fir_lattice_f32( + const arm_fir_lattice_instance_f32 * S, + float32_t * pSrc, + float32_t * pDst, + uint32_t blockSize); + + + /** + * @brief Instance structure for the Q15 IIR lattice filter. + */ + typedef struct + { + uint16_t numStages; /**< number of stages in the filter. */ + q15_t *pState; /**< points to the state variable array. The array is of length numStages+blockSize. */ + q15_t *pkCoeffs; /**< points to the reflection coefficient array. The array is of length numStages. */ + q15_t *pvCoeffs; /**< points to the ladder coefficient array. The array is of length numStages+1. */ + } arm_iir_lattice_instance_q15; + + /** + * @brief Instance structure for the Q31 IIR lattice filter. + */ + typedef struct + { + uint16_t numStages; /**< number of stages in the filter. */ + q31_t *pState; /**< points to the state variable array. The array is of length numStages+blockSize. */ + q31_t *pkCoeffs; /**< points to the reflection coefficient array. The array is of length numStages. */ + q31_t *pvCoeffs; /**< points to the ladder coefficient array. The array is of length numStages+1. */ + } arm_iir_lattice_instance_q31; + + /** + * @brief Instance structure for the floating-point IIR lattice filter. + */ + typedef struct + { + uint16_t numStages; /**< number of stages in the filter. */ + float32_t *pState; /**< points to the state variable array. The array is of length numStages+blockSize. */ + float32_t *pkCoeffs; /**< points to the reflection coefficient array. The array is of length numStages. */ + float32_t *pvCoeffs; /**< points to the ladder coefficient array. The array is of length numStages+1. */ + } arm_iir_lattice_instance_f32; + + + /** + * @brief Processing function for the floating-point IIR lattice filter. + * @param[in] S points to an instance of the floating-point IIR lattice structure. + * @param[in] pSrc points to the block of input data. + * @param[out] pDst points to the block of output data. + * @param[in] blockSize number of samples to process. + */ + void arm_iir_lattice_f32( + const arm_iir_lattice_instance_f32 * S, + float32_t * pSrc, + float32_t * pDst, + uint32_t blockSize); + + + /** + * @brief Initialization function for the floating-point IIR lattice filter. + * @param[in] S points to an instance of the floating-point IIR lattice structure. + * @param[in] numStages number of stages in the filter. + * @param[in] pkCoeffs points to the reflection coefficient buffer. The array is of length numStages. + * @param[in] pvCoeffs points to the ladder coefficient buffer. The array is of length numStages+1. + * @param[in] pState points to the state buffer. The array is of length numStages+blockSize-1. + * @param[in] blockSize number of samples to process. + */ + void arm_iir_lattice_init_f32( + arm_iir_lattice_instance_f32 * S, + uint16_t numStages, + float32_t * pkCoeffs, + float32_t * pvCoeffs, + float32_t * pState, + uint32_t blockSize); + + + /** + * @brief Processing function for the Q31 IIR lattice filter. + * @param[in] S points to an instance of the Q31 IIR lattice structure. + * @param[in] pSrc points to the block of input data. + * @param[out] pDst points to the block of output data. + * @param[in] blockSize number of samples to process. + */ + void arm_iir_lattice_q31( + const arm_iir_lattice_instance_q31 * S, + q31_t * pSrc, + q31_t * pDst, + uint32_t blockSize); + + + /** + * @brief Initialization function for the Q31 IIR lattice filter. + * @param[in] S points to an instance of the Q31 IIR lattice structure. + * @param[in] numStages number of stages in the filter. + * @param[in] pkCoeffs points to the reflection coefficient buffer. The array is of length numStages. + * @param[in] pvCoeffs points to the ladder coefficient buffer. The array is of length numStages+1. + * @param[in] pState points to the state buffer. The array is of length numStages+blockSize. + * @param[in] blockSize number of samples to process. + */ + void arm_iir_lattice_init_q31( + arm_iir_lattice_instance_q31 * S, + uint16_t numStages, + q31_t * pkCoeffs, + q31_t * pvCoeffs, + q31_t * pState, + uint32_t blockSize); + + + /** + * @brief Processing function for the Q15 IIR lattice filter. + * @param[in] S points to an instance of the Q15 IIR lattice structure. + * @param[in] pSrc points to the block of input data. + * @param[out] pDst points to the block of output data. + * @param[in] blockSize number of samples to process. + */ + void arm_iir_lattice_q15( + const arm_iir_lattice_instance_q15 * S, + q15_t * pSrc, + q15_t * pDst, + uint32_t blockSize); + + +/** + * @brief Initialization function for the Q15 IIR lattice filter. + * @param[in] S points to an instance of the fixed-point Q15 IIR lattice structure. + * @param[in] numStages number of stages in the filter. + * @param[in] pkCoeffs points to reflection coefficient buffer. The array is of length numStages. + * @param[in] pvCoeffs points to ladder coefficient buffer. The array is of length numStages+1. + * @param[in] pState points to state buffer. The array is of length numStages+blockSize. + * @param[in] blockSize number of samples to process per call. + */ + void arm_iir_lattice_init_q15( + arm_iir_lattice_instance_q15 * S, + uint16_t numStages, + q15_t * pkCoeffs, + q15_t * pvCoeffs, + q15_t * pState, + uint32_t blockSize); + + + /** + * @brief Instance structure for the floating-point LMS filter. + */ + typedef struct + { + uint16_t numTaps; /**< number of coefficients in the filter. */ + float32_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */ + float32_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */ + float32_t mu; /**< step size that controls filter coefficient updates. */ + } arm_lms_instance_f32; + + + /** + * @brief Processing function for floating-point LMS filter. + * @param[in] S points to an instance of the floating-point LMS filter structure. + * @param[in] pSrc points to the block of input data. + * @param[in] pRef points to the block of reference data. + * @param[out] pOut points to the block of output data. + * @param[out] pErr points to the block of error data. + * @param[in] blockSize number of samples to process. + */ + void arm_lms_f32( + const arm_lms_instance_f32 * S, + float32_t * pSrc, + float32_t * pRef, + float32_t * pOut, + float32_t * pErr, + uint32_t blockSize); + + + /** + * @brief Initialization function for floating-point LMS filter. + * @param[in] S points to an instance of the floating-point LMS filter structure. + * @param[in] numTaps number of filter coefficients. + * @param[in] pCoeffs points to the coefficient buffer. + * @param[in] pState points to state buffer. + * @param[in] mu step size that controls filter coefficient updates. + * @param[in] blockSize number of samples to process. + */ + void arm_lms_init_f32( + arm_lms_instance_f32 * S, + uint16_t numTaps, + float32_t * pCoeffs, + float32_t * pState, + float32_t mu, + uint32_t blockSize); + + + /** + * @brief Instance structure for the Q15 LMS filter. + */ + typedef struct + { + uint16_t numTaps; /**< number of coefficients in the filter. */ + q15_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */ + q15_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */ + q15_t mu; /**< step size that controls filter coefficient updates. */ + uint32_t postShift; /**< bit shift applied to coefficients. */ + } arm_lms_instance_q15; + + + /** + * @brief Initialization function for the Q15 LMS filter. + * @param[in] S points to an instance of the Q15 LMS filter structure. + * @param[in] numTaps number of filter coefficients. + * @param[in] pCoeffs points to the coefficient buffer. + * @param[in] pState points to the state buffer. + * @param[in] mu step size that controls filter coefficient updates. + * @param[in] blockSize number of samples to process. + * @param[in] postShift bit shift applied to coefficients. + */ + void arm_lms_init_q15( + arm_lms_instance_q15 * S, + uint16_t numTaps, + q15_t * pCoeffs, + q15_t * pState, + q15_t mu, + uint32_t blockSize, + uint32_t postShift); + + + /** + * @brief Processing function for Q15 LMS filter. + * @param[in] S points to an instance of the Q15 LMS filter structure. + * @param[in] pSrc points to the block of input data. + * @param[in] pRef points to the block of reference data. + * @param[out] pOut points to the block of output data. + * @param[out] pErr points to the block of error data. + * @param[in] blockSize number of samples to process. + */ + void arm_lms_q15( + const arm_lms_instance_q15 * S, + q15_t * pSrc, + q15_t * pRef, + q15_t * pOut, + q15_t * pErr, + uint32_t blockSize); + + + /** + * @brief Instance structure for the Q31 LMS filter. + */ + typedef struct + { + uint16_t numTaps; /**< number of coefficients in the filter. */ + q31_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */ + q31_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */ + q31_t mu; /**< step size that controls filter coefficient updates. */ + uint32_t postShift; /**< bit shift applied to coefficients. */ + } arm_lms_instance_q31; + + + /** + * @brief Processing function for Q31 LMS filter. + * @param[in] S points to an instance of the Q15 LMS filter structure. + * @param[in] pSrc points to the block of input data. + * @param[in] pRef points to the block of reference data. + * @param[out] pOut points to the block of output data. + * @param[out] pErr points to the block of error data. + * @param[in] blockSize number of samples to process. + */ + void arm_lms_q31( + const arm_lms_instance_q31 * S, + q31_t * pSrc, + q31_t * pRef, + q31_t * pOut, + q31_t * pErr, + uint32_t blockSize); + + + /** + * @brief Initialization function for Q31 LMS filter. + * @param[in] S points to an instance of the Q31 LMS filter structure. + * @param[in] numTaps number of filter coefficients. + * @param[in] pCoeffs points to coefficient buffer. + * @param[in] pState points to state buffer. + * @param[in] mu step size that controls filter coefficient updates. + * @param[in] blockSize number of samples to process. + * @param[in] postShift bit shift applied to coefficients. + */ + void arm_lms_init_q31( + arm_lms_instance_q31 * S, + uint16_t numTaps, + q31_t * pCoeffs, + q31_t * pState, + q31_t mu, + uint32_t blockSize, + uint32_t postShift); + + + /** + * @brief Instance structure for the floating-point normalized LMS filter. + */ + typedef struct + { + uint16_t numTaps; /**< number of coefficients in the filter. */ + float32_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */ + float32_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */ + float32_t mu; /**< step size that control filter coefficient updates. */ + float32_t energy; /**< saves previous frame energy. */ + float32_t x0; /**< saves previous input sample. */ + } arm_lms_norm_instance_f32; + + + /** + * @brief Processing function for floating-point normalized LMS filter. + * @param[in] S points to an instance of the floating-point normalized LMS filter structure. + * @param[in] pSrc points to the block of input data. + * @param[in] pRef points to the block of reference data. + * @param[out] pOut points to the block of output data. + * @param[out] pErr points to the block of error data. + * @param[in] blockSize number of samples to process. + */ + void arm_lms_norm_f32( + arm_lms_norm_instance_f32 * S, + float32_t * pSrc, + float32_t * pRef, + float32_t * pOut, + float32_t * pErr, + uint32_t blockSize); + + + /** + * @brief Initialization function for floating-point normalized LMS filter. + * @param[in] S points to an instance of the floating-point LMS filter structure. + * @param[in] numTaps number of filter coefficients. + * @param[in] pCoeffs points to coefficient buffer. + * @param[in] pState points to state buffer. + * @param[in] mu step size that controls filter coefficient updates. + * @param[in] blockSize number of samples to process. + */ + void arm_lms_norm_init_f32( + arm_lms_norm_instance_f32 * S, + uint16_t numTaps, + float32_t * pCoeffs, + float32_t * pState, + float32_t mu, + uint32_t blockSize); + + + /** + * @brief Instance structure for the Q31 normalized LMS filter. + */ + typedef struct + { + uint16_t numTaps; /**< number of coefficients in the filter. */ + q31_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */ + q31_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */ + q31_t mu; /**< step size that controls filter coefficient updates. */ + uint8_t postShift; /**< bit shift applied to coefficients. */ + q31_t *recipTable; /**< points to the reciprocal initial value table. */ + q31_t energy; /**< saves previous frame energy. */ + q31_t x0; /**< saves previous input sample. */ + } arm_lms_norm_instance_q31; + + + /** + * @brief Processing function for Q31 normalized LMS filter. + * @param[in] S points to an instance of the Q31 normalized LMS filter structure. + * @param[in] pSrc points to the block of input data. + * @param[in] pRef points to the block of reference data. + * @param[out] pOut points to the block of output data. + * @param[out] pErr points to the block of error data. + * @param[in] blockSize number of samples to process. + */ + void arm_lms_norm_q31( + arm_lms_norm_instance_q31 * S, + q31_t * pSrc, + q31_t * pRef, + q31_t * pOut, + q31_t * pErr, + uint32_t blockSize); + + + /** + * @brief Initialization function for Q31 normalized LMS filter. + * @param[in] S points to an instance of the Q31 normalized LMS filter structure. + * @param[in] numTaps number of filter coefficients. + * @param[in] pCoeffs points to coefficient buffer. + * @param[in] pState points to state buffer. + * @param[in] mu step size that controls filter coefficient updates. + * @param[in] blockSize number of samples to process. + * @param[in] postShift bit shift applied to coefficients. + */ + void arm_lms_norm_init_q31( + arm_lms_norm_instance_q31 * S, + uint16_t numTaps, + q31_t * pCoeffs, + q31_t * pState, + q31_t mu, + uint32_t blockSize, + uint8_t postShift); + + + /** + * @brief Instance structure for the Q15 normalized LMS filter. + */ + typedef struct + { + uint16_t numTaps; /**< Number of coefficients in the filter. */ + q15_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */ + q15_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */ + q15_t mu; /**< step size that controls filter coefficient updates. */ + uint8_t postShift; /**< bit shift applied to coefficients. */ + q15_t *recipTable; /**< Points to the reciprocal initial value table. */ + q15_t energy; /**< saves previous frame energy. */ + q15_t x0; /**< saves previous input sample. */ + } arm_lms_norm_instance_q15; + + + /** + * @brief Processing function for Q15 normalized LMS filter. + * @param[in] S points to an instance of the Q15 normalized LMS filter structure. + * @param[in] pSrc points to the block of input data. + * @param[in] pRef points to the block of reference data. + * @param[out] pOut points to the block of output data. + * @param[out] pErr points to the block of error data. + * @param[in] blockSize number of samples to process. + */ + void arm_lms_norm_q15( + arm_lms_norm_instance_q15 * S, + q15_t * pSrc, + q15_t * pRef, + q15_t * pOut, + q15_t * pErr, + uint32_t blockSize); + + + /** + * @brief Initialization function for Q15 normalized LMS filter. + * @param[in] S points to an instance of the Q15 normalized LMS filter structure. + * @param[in] numTaps number of filter coefficients. + * @param[in] pCoeffs points to coefficient buffer. + * @param[in] pState points to state buffer. + * @param[in] mu step size that controls filter coefficient updates. + * @param[in] blockSize number of samples to process. + * @param[in] postShift bit shift applied to coefficients. + */ + void arm_lms_norm_init_q15( + arm_lms_norm_instance_q15 * S, + uint16_t numTaps, + q15_t * pCoeffs, + q15_t * pState, + q15_t mu, + uint32_t blockSize, + uint8_t postShift); + + + /** + * @brief Correlation of floating-point sequences. + * @param[in] pSrcA points to the first input sequence. + * @param[in] srcALen length of the first input sequence. + * @param[in] pSrcB points to the second input sequence. + * @param[in] srcBLen length of the second input sequence. + * @param[out] pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1. + */ + void arm_correlate_f32( + float32_t * pSrcA, + uint32_t srcALen, + float32_t * pSrcB, + uint32_t srcBLen, + float32_t * pDst); + + + /** + * @brief Correlation of Q15 sequences + * @param[in] pSrcA points to the first input sequence. + * @param[in] srcALen length of the first input sequence. + * @param[in] pSrcB points to the second input sequence. + * @param[in] srcBLen length of the second input sequence. + * @param[out] pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1. + * @param[in] pScratch points to scratch buffer of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2. + */ + void arm_correlate_opt_q15( + q15_t * pSrcA, + uint32_t srcALen, + q15_t * pSrcB, + uint32_t srcBLen, + q15_t * pDst, + q15_t * pScratch); + + + /** + * @brief Correlation of Q15 sequences. + * @param[in] pSrcA points to the first input sequence. + * @param[in] srcALen length of the first input sequence. + * @param[in] pSrcB points to the second input sequence. + * @param[in] srcBLen length of the second input sequence. + * @param[out] pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1. + */ + + void arm_correlate_q15( + q15_t * pSrcA, + uint32_t srcALen, + q15_t * pSrcB, + uint32_t srcBLen, + q15_t * pDst); + + + /** + * @brief Correlation of Q15 sequences (fast version) for Cortex-M3 and Cortex-M4. + * @param[in] pSrcA points to the first input sequence. + * @param[in] srcALen length of the first input sequence. + * @param[in] pSrcB points to the second input sequence. + * @param[in] srcBLen length of the second input sequence. + * @param[out] pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1. + */ + + void arm_correlate_fast_q15( + q15_t * pSrcA, + uint32_t srcALen, + q15_t * pSrcB, + uint32_t srcBLen, + q15_t * pDst); + + + /** + * @brief Correlation of Q15 sequences (fast version) for Cortex-M3 and Cortex-M4. + * @param[in] pSrcA points to the first input sequence. + * @param[in] srcALen length of the first input sequence. + * @param[in] pSrcB points to the second input sequence. + * @param[in] srcBLen length of the second input sequence. + * @param[out] pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1. + * @param[in] pScratch points to scratch buffer of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2. + */ + void arm_correlate_fast_opt_q15( + q15_t * pSrcA, + uint32_t srcALen, + q15_t * pSrcB, + uint32_t srcBLen, + q15_t * pDst, + q15_t * pScratch); + + + /** + * @brief Correlation of Q31 sequences. + * @param[in] pSrcA points to the first input sequence. + * @param[in] srcALen length of the first input sequence. + * @param[in] pSrcB points to the second input sequence. + * @param[in] srcBLen length of the second input sequence. + * @param[out] pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1. + */ + void arm_correlate_q31( + q31_t * pSrcA, + uint32_t srcALen, + q31_t * pSrcB, + uint32_t srcBLen, + q31_t * pDst); + + + /** + * @brief Correlation of Q31 sequences (fast version) for Cortex-M3 and Cortex-M4 + * @param[in] pSrcA points to the first input sequence. + * @param[in] srcALen length of the first input sequence. + * @param[in] pSrcB points to the second input sequence. + * @param[in] srcBLen length of the second input sequence. + * @param[out] pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1. + */ + void arm_correlate_fast_q31( + q31_t * pSrcA, + uint32_t srcALen, + q31_t * pSrcB, + uint32_t srcBLen, + q31_t * pDst); + + + /** + * @brief Correlation of Q7 sequences. + * @param[in] pSrcA points to the first input sequence. + * @param[in] srcALen length of the first input sequence. + * @param[in] pSrcB points to the second input sequence. + * @param[in] srcBLen length of the second input sequence. + * @param[out] pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1. + * @param[in] pScratch1 points to scratch buffer(of type q15_t) of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2. + * @param[in] pScratch2 points to scratch buffer (of type q15_t) of size min(srcALen, srcBLen). + */ + void arm_correlate_opt_q7( + q7_t * pSrcA, + uint32_t srcALen, + q7_t * pSrcB, + uint32_t srcBLen, + q7_t * pDst, + q15_t * pScratch1, + q15_t * pScratch2); + + + /** + * @brief Correlation of Q7 sequences. + * @param[in] pSrcA points to the first input sequence. + * @param[in] srcALen length of the first input sequence. + * @param[in] pSrcB points to the second input sequence. + * @param[in] srcBLen length of the second input sequence. + * @param[out] pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1. + */ + void arm_correlate_q7( + q7_t * pSrcA, + uint32_t srcALen, + q7_t * pSrcB, + uint32_t srcBLen, + q7_t * pDst); + + + /** + * @brief Instance structure for the floating-point sparse FIR filter. + */ + typedef struct + { + uint16_t numTaps; /**< number of coefficients in the filter. */ + uint16_t stateIndex; /**< state buffer index. Points to the oldest sample in the state buffer. */ + float32_t *pState; /**< points to the state buffer array. The array is of length maxDelay+blockSize-1. */ + float32_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/ + uint16_t maxDelay; /**< maximum offset specified by the pTapDelay array. */ + int32_t *pTapDelay; /**< points to the array of delay values. The array is of length numTaps. */ + } arm_fir_sparse_instance_f32; + + /** + * @brief Instance structure for the Q31 sparse FIR filter. + */ + typedef struct + { + uint16_t numTaps; /**< number of coefficients in the filter. */ + uint16_t stateIndex; /**< state buffer index. Points to the oldest sample in the state buffer. */ + q31_t *pState; /**< points to the state buffer array. The array is of length maxDelay+blockSize-1. */ + q31_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/ + uint16_t maxDelay; /**< maximum offset specified by the pTapDelay array. */ + int32_t *pTapDelay; /**< points to the array of delay values. The array is of length numTaps. */ + } arm_fir_sparse_instance_q31; + + /** + * @brief Instance structure for the Q15 sparse FIR filter. + */ + typedef struct + { + uint16_t numTaps; /**< number of coefficients in the filter. */ + uint16_t stateIndex; /**< state buffer index. Points to the oldest sample in the state buffer. */ + q15_t *pState; /**< points to the state buffer array. The array is of length maxDelay+blockSize-1. */ + q15_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/ + uint16_t maxDelay; /**< maximum offset specified by the pTapDelay array. */ + int32_t *pTapDelay; /**< points to the array of delay values. The array is of length numTaps. */ + } arm_fir_sparse_instance_q15; + + /** + * @brief Instance structure for the Q7 sparse FIR filter. + */ + typedef struct + { + uint16_t numTaps; /**< number of coefficients in the filter. */ + uint16_t stateIndex; /**< state buffer index. Points to the oldest sample in the state buffer. */ + q7_t *pState; /**< points to the state buffer array. The array is of length maxDelay+blockSize-1. */ + q7_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/ + uint16_t maxDelay; /**< maximum offset specified by the pTapDelay array. */ + int32_t *pTapDelay; /**< points to the array of delay values. The array is of length numTaps. */ + } arm_fir_sparse_instance_q7; + + + /** + * @brief Processing function for the floating-point sparse FIR filter. + * @param[in] S points to an instance of the floating-point sparse FIR structure. + * @param[in] pSrc points to the block of input data. + * @param[out] pDst points to the block of output data + * @param[in] pScratchIn points to a temporary buffer of size blockSize. + * @param[in] blockSize number of input samples to process per call. + */ + void arm_fir_sparse_f32( + arm_fir_sparse_instance_f32 * S, + float32_t * pSrc, + float32_t * pDst, + float32_t * pScratchIn, + uint32_t blockSize); + + + /** + * @brief Initialization function for the floating-point sparse FIR filter. + * @param[in,out] S points to an instance of the floating-point sparse FIR structure. + * @param[in] numTaps number of nonzero coefficients in the filter. + * @param[in] pCoeffs points to the array of filter coefficients. + * @param[in] pState points to the state buffer. + * @param[in] pTapDelay points to the array of offset times. + * @param[in] maxDelay maximum offset time supported. + * @param[in] blockSize number of samples that will be processed per block. + */ + void arm_fir_sparse_init_f32( + arm_fir_sparse_instance_f32 * S, + uint16_t numTaps, + float32_t * pCoeffs, + float32_t * pState, + int32_t * pTapDelay, + uint16_t maxDelay, + uint32_t blockSize); + + + /** + * @brief Processing function for the Q31 sparse FIR filter. + * @param[in] S points to an instance of the Q31 sparse FIR structure. + * @param[in] pSrc points to the block of input data. + * @param[out] pDst points to the block of output data + * @param[in] pScratchIn points to a temporary buffer of size blockSize. + * @param[in] blockSize number of input samples to process per call. + */ + void arm_fir_sparse_q31( + arm_fir_sparse_instance_q31 * S, + q31_t * pSrc, + q31_t * pDst, + q31_t * pScratchIn, + uint32_t blockSize); + + + /** + * @brief Initialization function for the Q31 sparse FIR filter. + * @param[in,out] S points to an instance of the Q31 sparse FIR structure. + * @param[in] numTaps number of nonzero coefficients in the filter. + * @param[in] pCoeffs points to the array of filter coefficients. + * @param[in] pState points to the state buffer. + * @param[in] pTapDelay points to the array of offset times. + * @param[in] maxDelay maximum offset time supported. + * @param[in] blockSize number of samples that will be processed per block. + */ + void arm_fir_sparse_init_q31( + arm_fir_sparse_instance_q31 * S, + uint16_t numTaps, + q31_t * pCoeffs, + q31_t * pState, + int32_t * pTapDelay, + uint16_t maxDelay, + uint32_t blockSize); + + + /** + * @brief Processing function for the Q15 sparse FIR filter. + * @param[in] S points to an instance of the Q15 sparse FIR structure. + * @param[in] pSrc points to the block of input data. + * @param[out] pDst points to the block of output data + * @param[in] pScratchIn points to a temporary buffer of size blockSize. + * @param[in] pScratchOut points to a temporary buffer of size blockSize. + * @param[in] blockSize number of input samples to process per call. + */ + void arm_fir_sparse_q15( + arm_fir_sparse_instance_q15 * S, + q15_t * pSrc, + q15_t * pDst, + q15_t * pScratchIn, + q31_t * pScratchOut, + uint32_t blockSize); + + + /** + * @brief Initialization function for the Q15 sparse FIR filter. + * @param[in,out] S points to an instance of the Q15 sparse FIR structure. + * @param[in] numTaps number of nonzero coefficients in the filter. + * @param[in] pCoeffs points to the array of filter coefficients. + * @param[in] pState points to the state buffer. + * @param[in] pTapDelay points to the array of offset times. + * @param[in] maxDelay maximum offset time supported. + * @param[in] blockSize number of samples that will be processed per block. + */ + void arm_fir_sparse_init_q15( + arm_fir_sparse_instance_q15 * S, + uint16_t numTaps, + q15_t * pCoeffs, + q15_t * pState, + int32_t * pTapDelay, + uint16_t maxDelay, + uint32_t blockSize); + + + /** + * @brief Processing function for the Q7 sparse FIR filter. + * @param[in] S points to an instance of the Q7 sparse FIR structure. + * @param[in] pSrc points to the block of input data. + * @param[out] pDst points to the block of output data + * @param[in] pScratchIn points to a temporary buffer of size blockSize. + * @param[in] pScratchOut points to a temporary buffer of size blockSize. + * @param[in] blockSize number of input samples to process per call. + */ + void arm_fir_sparse_q7( + arm_fir_sparse_instance_q7 * S, + q7_t * pSrc, + q7_t * pDst, + q7_t * pScratchIn, + q31_t * pScratchOut, + uint32_t blockSize); + + + /** + * @brief Initialization function for the Q7 sparse FIR filter. + * @param[in,out] S points to an instance of the Q7 sparse FIR structure. + * @param[in] numTaps number of nonzero coefficients in the filter. + * @param[in] pCoeffs points to the array of filter coefficients. + * @param[in] pState points to the state buffer. + * @param[in] pTapDelay points to the array of offset times. + * @param[in] maxDelay maximum offset time supported. + * @param[in] blockSize number of samples that will be processed per block. + */ + void arm_fir_sparse_init_q7( + arm_fir_sparse_instance_q7 * S, + uint16_t numTaps, + q7_t * pCoeffs, + q7_t * pState, + int32_t * pTapDelay, + uint16_t maxDelay, + uint32_t blockSize); + + + /** + * @brief Floating-point sin_cos function. + * @param[in] theta input value in degrees + * @param[out] pSinVal points to the processed sine output. + * @param[out] pCosVal points to the processed cos output. + */ + void arm_sin_cos_f32( + float32_t theta, + float32_t * pSinVal, + float32_t * pCosVal); + + + /** + * @brief Q31 sin_cos function. + * @param[in] theta scaled input value in degrees + * @param[out] pSinVal points to the processed sine output. + * @param[out] pCosVal points to the processed cosine output. + */ + void arm_sin_cos_q31( + q31_t theta, + q31_t * pSinVal, + q31_t * pCosVal); + + + /** + * @brief Floating-point complex conjugate. + * @param[in] pSrc points to the input vector + * @param[out] pDst points to the output vector + * @param[in] numSamples number of complex samples in each vector + */ + void arm_cmplx_conj_f32( + float32_t * pSrc, + float32_t * pDst, + uint32_t numSamples); + + /** + * @brief Q31 complex conjugate. + * @param[in] pSrc points to the input vector + * @param[out] pDst points to the output vector + * @param[in] numSamples number of complex samples in each vector + */ + void arm_cmplx_conj_q31( + q31_t * pSrc, + q31_t * pDst, + uint32_t numSamples); + + + /** + * @brief Q15 complex conjugate. + * @param[in] pSrc points to the input vector + * @param[out] pDst points to the output vector + * @param[in] numSamples number of complex samples in each vector + */ + void arm_cmplx_conj_q15( + q15_t * pSrc, + q15_t * pDst, + uint32_t numSamples); + + + /** + * @brief Floating-point complex magnitude squared + * @param[in] pSrc points to the complex input vector + * @param[out] pDst points to the real output vector + * @param[in] numSamples number of complex samples in the input vector + */ + void arm_cmplx_mag_squared_f32( + float32_t * pSrc, + float32_t * pDst, + uint32_t numSamples); + + + /** + * @brief Q31 complex magnitude squared + * @param[in] pSrc points to the complex input vector + * @param[out] pDst points to the real output vector + * @param[in] numSamples number of complex samples in the input vector + */ + void arm_cmplx_mag_squared_q31( + q31_t * pSrc, + q31_t * pDst, + uint32_t numSamples); + + + /** + * @brief Q15 complex magnitude squared + * @param[in] pSrc points to the complex input vector + * @param[out] pDst points to the real output vector + * @param[in] numSamples number of complex samples in the input vector + */ + void arm_cmplx_mag_squared_q15( + q15_t * pSrc, + q15_t * pDst, + uint32_t numSamples); + + + /** + * @ingroup groupController + */ + + /** + * @defgroup PID PID Motor Control + * + * A Proportional Integral Derivative (PID) controller is a generic feedback control + * loop mechanism widely used in industrial control systems. + * A PID controller is the most commonly used type of feedback controller. + * + * This set of functions implements (PID) controllers + * for Q15, Q31, and floating-point data types. The functions operate on a single sample + * of data and each call to the function returns a single processed value. + * S points to an instance of the PID control data structure. in + * is the input sample value. The functions return the output value. + * + * \par Algorithm: + * 
+   *    y[n] = y[n-1] + A0 * x[n] + A1 * x[n-1] + A2 * x[n-2]
+   *    A0 = Kp + Ki + Kd
+   *    A1 = (-Kp ) - (2 * Kd )
+   *    A2 = Kd
+ * + * \par + * where \c Kp is proportional constant, \c Ki is Integral constant and \c Kd is Derivative constant + * + * \par + * \image html PID.gif "Proportional Integral Derivative Controller" + * + * \par + * The PID controller calculates an "error" value as the difference between + * the measured output and the reference input. + * The controller attempts to minimize the error by adjusting the process control inputs. + * The proportional value determines the reaction to the current error, + * the integral value determines the reaction based on the sum of recent errors, + * and the derivative value determines the reaction based on the rate at which the error has been changing. + * + * \par Instance Structure + * The Gains A0, A1, A2 and state variables for a PID controller are stored together in an instance data structure. + * A separate instance structure must be defined for each PID Controller. + * There are separate instance structure declarations for each of the 3 supported data types. + * + * \par Reset Functions + * There is also an associated reset function for each data type which clears the state array. + * + * \par Initialization Functions + * There is also an associated initialization function for each data type. + * The initialization function performs the following operations: + * - Initializes the Gains A0, A1, A2 from Kp,Ki, Kd gains. + * - Zeros out the values in the state buffer. + * + * \par + * Instance structure cannot be placed into a const data section and it is recommended to use the initialization function. + * + * \par Fixed-Point Behavior + * Care must be taken when using the fixed-point versions of the PID Controller functions. + * In particular, the overflow and saturation behavior of the accumulator used in each function must be considered. + * Refer to the function specific documentation below for usage guidelines. + */ + + /** + * @addtogroup PID + * @{ + */ + + /** + * @brief Process function for the floating-point PID Control. + * @param[in,out] S is an instance of the floating-point PID Control structure + * @param[in] in input sample to process + * @return out processed output sample. + */ + static __INLINE float32_t arm_pid_f32( + arm_pid_instance_f32 * S, + float32_t in) + { + float32_t out; + + /* y[n] = y[n-1] + A0 * x[n] + A1 * x[n-1] + A2 * x[n-2] */ + out = (S->A0 * in) + + (S->A1 * S->state[0]) + (S->A2 * S->state[1]) + (S->state[2]); + + /* Update state */ + S->state[1] = S->state[0]; + S->state[0] = in; + S->state[2] = out; + + /* return to application */ + return (out); + + } + + /** + * @brief Process function for the Q31 PID Control. + * @param[in,out] S points to an instance of the Q31 PID Control structure + * @param[in] in input sample to process + * @return out processed output sample. + * + * Scaling and Overflow Behavior: + * \par + * The function is implemented using an internal 64-bit accumulator. + * The accumulator has a 2.62 format and maintains full precision of the intermediate multiplication results but provides only a single guard bit. + * Thus, if the accumulator result overflows it wraps around rather than clip. + * In order to avoid overflows completely the input signal must be scaled down by 2 bits as there are four additions. + * After all multiply-accumulates are performed, the 2.62 accumulator is truncated to 1.32 format and then saturated to 1.31 format. + */ + static __INLINE q31_t arm_pid_q31( + arm_pid_instance_q31 * S, + q31_t in) + { + q63_t acc; + q31_t out; + + /* acc = A0 * x[n] */ + acc = (q63_t) S->A0 * in; + + /* acc += A1 * x[n-1] */ + acc += (q63_t) S->A1 * S->state[0]; + + /* acc += A2 * x[n-2] */ + acc += (q63_t) S->A2 * S->state[1]; + + /* convert output to 1.31 format to add y[n-1] */ + out = (q31_t) (acc >> 31u); + + /* out += y[n-1] */ + out += S->state[2]; + + /* Update state */ + S->state[1] = S->state[0]; + S->state[0] = in; + S->state[2] = out; + + /* return to application */ + return (out); + } + + + /** + * @brief Process function for the Q15 PID Control. + * @param[in,out] S points to an instance of the Q15 PID Control structure + * @param[in] in input sample to process + * @return out processed output sample. + * + * Scaling and Overflow Behavior: + * \par + * The function is implemented using a 64-bit internal accumulator. + * Both Gains and state variables are represented in 1.15 format and multiplications yield a 2.30 result. + * The 2.30 intermediate results are accumulated in a 64-bit accumulator in 34.30 format. + * There is no risk of internal overflow with this approach and the full precision of intermediate multiplications is preserved. + * After all additions have been performed, the accumulator is truncated to 34.15 format by discarding low 15 bits. + * Lastly, the accumulator is saturated to yield a result in 1.15 format. + */ + static __INLINE q15_t arm_pid_q15( + arm_pid_instance_q15 * S, + q15_t in) + { + q63_t acc; + q15_t out; + +#ifndef ARM_MATH_CM0_FAMILY + __SIMD32_TYPE *vstate; + + /* Implementation of PID controller */ + + /* acc = A0 * x[n] */ + acc = (q31_t) __SMUAD((uint32_t)S->A0, (uint32_t)in); + + /* acc += A1 * x[n-1] + A2 * x[n-2] */ + vstate = __SIMD32_CONST(S->state); + acc = (q63_t)__SMLALD((uint32_t)S->A1, (uint32_t)*vstate, (uint64_t)acc); +#else + /* acc = A0 * x[n] */ + acc = ((q31_t) S->A0) * in; + + /* acc += A1 * x[n-1] + A2 * x[n-2] */ + acc += (q31_t) S->A1 * S->state[0]; + acc += (q31_t) S->A2 * S->state[1]; +#endif + + /* acc += y[n-1] */ + acc += (q31_t) S->state[2] << 15; + + /* saturate the output */ + out = (q15_t) (__SSAT((acc >> 15), 16)); + + /* Update state */ + S->state[1] = S->state[0]; + S->state[0] = in; + S->state[2] = out; + + /* return to application */ + return (out); + } + + /** + * @} end of PID group + */ + + + /** + * @brief Floating-point matrix inverse. + * @param[in] src points to the instance of the input floating-point matrix structure. + * @param[out] dst points to the instance of the output floating-point matrix structure. + * @return The function returns ARM_MATH_SIZE_MISMATCH, if the dimensions do not match. + * If the input matrix is singular (does not have an inverse), then the algorithm terminates and returns error status ARM_MATH_SINGULAR. + */ + arm_status arm_mat_inverse_f32( + const arm_matrix_instance_f32 * src, + arm_matrix_instance_f32 * dst); + + + /** + * @brief Floating-point matrix inverse. + * @param[in] src points to the instance of the input floating-point matrix structure. + * @param[out] dst points to the instance of the output floating-point matrix structure. + * @return The function returns ARM_MATH_SIZE_MISMATCH, if the dimensions do not match. + * If the input matrix is singular (does not have an inverse), then the algorithm terminates and returns error status ARM_MATH_SINGULAR. + */ + arm_status arm_mat_inverse_f64( + const arm_matrix_instance_f64 * src, + arm_matrix_instance_f64 * dst); + + + + /** + * @ingroup groupController + */ + + /** + * @defgroup clarke Vector Clarke Transform + * Forward Clarke transform converts the instantaneous stator phases into a two-coordinate time invariant vector. + * Generally the Clarke transform uses three-phase currents Ia, Ib and Ic to calculate currents + * in the two-phase orthogonal stator axis Ialpha and Ibeta. + * When Ialpha is superposed with Ia as shown in the figure below + * \image html clarke.gif Stator current space vector and its components in (a,b). + * and Ia + Ib + Ic = 0, in this condition Ialpha and Ibeta + * can be calculated using only Ia and Ib. + * + * The function operates on a single sample of data and each call to the function returns the processed output. + * The library provides separate functions for Q31 and floating-point data types. + * \par Algorithm + * \image html clarkeFormula.gif + * where Ia and Ib are the instantaneous stator phases and + * pIalpha and pIbeta are the two coordinates of time invariant vector. + * \par Fixed-Point Behavior + * Care must be taken when using the Q31 version of the Clarke transform. + * In particular, the overflow and saturation behavior of the accumulator used must be considered. + * Refer to the function specific documentation below for usage guidelines. + */ + + /** + * @addtogroup clarke + * @{ + */ + + /** + * + * @brief Floating-point Clarke transform + * @param[in] Ia input three-phase coordinate a + * @param[in] Ib input three-phase coordinate b + * @param[out] pIalpha points to output two-phase orthogonal vector axis alpha + * @param[out] pIbeta points to output two-phase orthogonal vector axis beta + */ + static __INLINE void arm_clarke_f32( + float32_t Ia, + float32_t Ib, + float32_t * pIalpha, + float32_t * pIbeta) + { + /* Calculate pIalpha using the equation, pIalpha = Ia */ + *pIalpha = Ia; + + /* Calculate pIbeta using the equation, pIbeta = (1/sqrt(3)) * Ia + (2/sqrt(3)) * Ib */ + *pIbeta = ((float32_t) 0.57735026919 * Ia + (float32_t) 1.15470053838 * Ib); + } + + + /** + * @brief Clarke transform for Q31 version + * @param[in] Ia input three-phase coordinate a + * @param[in] Ib input three-phase coordinate b + * @param[out] pIalpha points to output two-phase orthogonal vector axis alpha + * @param[out] pIbeta points to output two-phase orthogonal vector axis beta + * + * Scaling and Overflow Behavior: + * \par + * The function is implemented using an internal 32-bit accumulator. + * The accumulator maintains 1.31 format by truncating lower 31 bits of the intermediate multiplication in 2.62 format. + * There is saturation on the addition, hence there is no risk of overflow. + */ + static __INLINE void arm_clarke_q31( + q31_t Ia, + q31_t Ib, + q31_t * pIalpha, + q31_t * pIbeta) + { + q31_t product1, product2; /* Temporary variables used to store intermediate results */ + + /* Calculating pIalpha from Ia by equation pIalpha = Ia */ + *pIalpha = Ia; + + /* Intermediate product is calculated by (1/(sqrt(3)) * Ia) */ + product1 = (q31_t) (((q63_t) Ia * 0x24F34E8B) >> 30); + + /* Intermediate product is calculated by (2/sqrt(3) * Ib) */ + product2 = (q31_t) (((q63_t) Ib * 0x49E69D16) >> 30); + + /* pIbeta is calculated by adding the intermediate products */ + *pIbeta = __QADD(product1, product2); + } + + /** + * @} end of clarke group + */ + + /** + * @brief Converts the elements of the Q7 vector to Q31 vector. + * @param[in] pSrc input pointer + * @param[out] pDst output pointer + * @param[in] blockSize number of samples to process + */ + void arm_q7_to_q31( + q7_t * pSrc, + q31_t * pDst, + uint32_t blockSize); + + + + /** + * @ingroup groupController + */ + + /** + * @defgroup inv_clarke Vector Inverse Clarke Transform + * Inverse Clarke transform converts the two-coordinate time invariant vector into instantaneous stator phases. + * + * The function operates on a single sample of data and each call to the function returns the processed output. + * The library provides separate functions for Q31 and floating-point data types. + * \par Algorithm + * \image html clarkeInvFormula.gif + * where pIa and pIb are the instantaneous stator phases and + * Ialpha and Ibeta are the two coordinates of time invariant vector. + * \par Fixed-Point Behavior + * Care must be taken when using the Q31 version of the Clarke transform. + * In particular, the overflow and saturation behavior of the accumulator used must be considered. + * Refer to the function specific documentation below for usage guidelines. + */ + + /** + * @addtogroup inv_clarke + * @{ + */ + + /** + * @brief Floating-point Inverse Clarke transform + * @param[in] Ialpha input two-phase orthogonal vector axis alpha + * @param[in] Ibeta input two-phase orthogonal vector axis beta + * @param[out] pIa points to output three-phase coordinate a + * @param[out] pIb points to output three-phase coordinate b + */ + static __INLINE void arm_inv_clarke_f32( + float32_t Ialpha, + float32_t Ibeta, + float32_t * pIa, + float32_t * pIb) + { + /* Calculating pIa from Ialpha by equation pIa = Ialpha */ + *pIa = Ialpha; + + /* Calculating pIb from Ialpha and Ibeta by equation pIb = -(1/2) * Ialpha + (sqrt(3)/2) * Ibeta */ + *pIb = -0.5f * Ialpha + 0.8660254039f * Ibeta; + } + + + /** + * @brief Inverse Clarke transform for Q31 version + * @param[in] Ialpha input two-phase orthogonal vector axis alpha + * @param[in] Ibeta input two-phase orthogonal vector axis beta + * @param[out] pIa points to output three-phase coordinate a + * @param[out] pIb points to output three-phase coordinate b + * + * Scaling and Overflow Behavior: + * \par + * The function is implemented using an internal 32-bit accumulator. + * The accumulator maintains 1.31 format by truncating lower 31 bits of the intermediate multiplication in 2.62 format. + * There is saturation on the subtraction, hence there is no risk of overflow. + */ + static __INLINE void arm_inv_clarke_q31( + q31_t Ialpha, + q31_t Ibeta, + q31_t * pIa, + q31_t * pIb) + { + q31_t product1, product2; /* Temporary variables used to store intermediate results */ + + /* Calculating pIa from Ialpha by equation pIa = Ialpha */ + *pIa = Ialpha; + + /* Intermediate product is calculated by (1/(2*sqrt(3)) * Ia) */ + product1 = (q31_t) (((q63_t) (Ialpha) * (0x40000000)) >> 31); + + /* Intermediate product is calculated by (1/sqrt(3) * pIb) */ + product2 = (q31_t) (((q63_t) (Ibeta) * (0x6ED9EBA1)) >> 31); + + /* pIb is calculated by subtracting the products */ + *pIb = __QSUB(product2, product1); + } + + /** + * @} end of inv_clarke group + */ + + /** + * @brief Converts the elements of the Q7 vector to Q15 vector. + * @param[in] pSrc input pointer + * @param[out] pDst output pointer + * @param[in] blockSize number of samples to process + */ + void arm_q7_to_q15( + q7_t * pSrc, + q15_t * pDst, + uint32_t blockSize); + + + + /** + * @ingroup groupController + */ + + /** + * @defgroup park Vector Park Transform + * + * Forward Park transform converts the input two-coordinate vector to flux and torque components. + * The Park transform can be used to realize the transformation of the Ialpha and the Ibeta currents + * from the stationary to the moving reference frame and control the spatial relationship between + * the stator vector current and rotor flux vector. + * If we consider the d axis aligned with the rotor flux, the diagram below shows the + * current vector and the relationship from the two reference frames: + * \image html park.gif "Stator current space vector and its component in (a,b) and in the d,q rotating reference frame" + * + * The function operates on a single sample of data and each call to the function returns the processed output. + * The library provides separate functions for Q31 and floating-point data types. + * \par Algorithm + * \image html parkFormula.gif + * where Ialpha and Ibeta are the stator vector components, + * pId and pIq are rotor vector components and cosVal and sinVal are the + * cosine and sine values of theta (rotor flux position). + * \par Fixed-Point Behavior + * Care must be taken when using the Q31 version of the Park transform. + * In particular, the overflow and saturation behavior of the accumulator used must be considered. + * Refer to the function specific documentation below for usage guidelines. + */ + + /** + * @addtogroup park + * @{ + */ + + /** + * @brief Floating-point Park transform + * @param[in] Ialpha input two-phase vector coordinate alpha + * @param[in] Ibeta input two-phase vector coordinate beta + * @param[out] pId points to output rotor reference frame d + * @param[out] pIq points to output rotor reference frame q + * @param[in] sinVal sine value of rotation angle theta + * @param[in] cosVal cosine value of rotation angle theta + * + * The function implements the forward Park transform. + * + */ + static __INLINE void arm_park_f32( + float32_t Ialpha, + float32_t Ibeta, + float32_t * pId, + float32_t * pIq, + float32_t sinVal, + float32_t cosVal) + { + /* Calculate pId using the equation, pId = Ialpha * cosVal + Ibeta * sinVal */ + *pId = Ialpha * cosVal + Ibeta * sinVal; + + /* Calculate pIq using the equation, pIq = - Ialpha * sinVal + Ibeta * cosVal */ + *pIq = -Ialpha * sinVal + Ibeta * cosVal; + } + + + /** + * @brief Park transform for Q31 version + * @param[in] Ialpha input two-phase vector coordinate alpha + * @param[in] Ibeta input two-phase vector coordinate beta + * @param[out] pId points to output rotor reference frame d + * @param[out] pIq points to output rotor reference frame q + * @param[in] sinVal sine value of rotation angle theta + * @param[in] cosVal cosine value of rotation angle theta + * + * Scaling and Overflow Behavior: + * \par + * The function is implemented using an internal 32-bit accumulator. + * The accumulator maintains 1.31 format by truncating lower 31 bits of the intermediate multiplication in 2.62 format. + * There is saturation on the addition and subtraction, hence there is no risk of overflow. + */ + static __INLINE void arm_park_q31( + q31_t Ialpha, + q31_t Ibeta, + q31_t * pId, + q31_t * pIq, + q31_t sinVal, + q31_t cosVal) + { + q31_t product1, product2; /* Temporary variables used to store intermediate results */ + q31_t product3, product4; /* Temporary variables used to store intermediate results */ + + /* Intermediate product is calculated by (Ialpha * cosVal) */ + product1 = (q31_t) (((q63_t) (Ialpha) * (cosVal)) >> 31); + + /* Intermediate product is calculated by (Ibeta * sinVal) */ + product2 = (q31_t) (((q63_t) (Ibeta) * (sinVal)) >> 31); + + + /* Intermediate product is calculated by (Ialpha * sinVal) */ + product3 = (q31_t) (((q63_t) (Ialpha) * (sinVal)) >> 31); + + /* Intermediate product is calculated by (Ibeta * cosVal) */ + product4 = (q31_t) (((q63_t) (Ibeta) * (cosVal)) >> 31); + + /* Calculate pId by adding the two intermediate products 1 and 2 */ + *pId = __QADD(product1, product2); + + /* Calculate pIq by subtracting the two intermediate products 3 from 4 */ + *pIq = __QSUB(product4, product3); + } + + /** + * @} end of park group + */ + + /** + * @brief Converts the elements of the Q7 vector to floating-point vector. + * @param[in] pSrc is input pointer + * @param[out] pDst is output pointer + * @param[in] blockSize is the number of samples to process + */ + void arm_q7_to_float( + q7_t * pSrc, + float32_t * pDst, + uint32_t blockSize); + + + /** + * @ingroup groupController + */ + + /** + * @defgroup inv_park Vector Inverse Park transform + * Inverse Park transform converts the input flux and torque components to two-coordinate vector. + * + * The function operates on a single sample of data and each call to the function returns the processed output. + * The library provides separate functions for Q31 and floating-point data types. + * \par Algorithm + * \image html parkInvFormula.gif + * where pIalpha and pIbeta are the stator vector components, + * Id and Iq are rotor vector components and cosVal and sinVal are the + * cosine and sine values of theta (rotor flux position). + * \par Fixed-Point Behavior + * Care must be taken when using the Q31 version of the Park transform. + * In particular, the overflow and saturation behavior of the accumulator used must be considered. + * Refer to the function specific documentation below for usage guidelines. + */ + + /** + * @addtogroup inv_park + * @{ + */ + + /** + * @brief Floating-point Inverse Park transform + * @param[in] Id input coordinate of rotor reference frame d + * @param[in] Iq input coordinate of rotor reference frame q + * @param[out] pIalpha points to output two-phase orthogonal vector axis alpha + * @param[out] pIbeta points to output two-phase orthogonal vector axis beta + * @param[in] sinVal sine value of rotation angle theta + * @param[in] cosVal cosine value of rotation angle theta + */ + static __INLINE void arm_inv_park_f32( + float32_t Id, + float32_t Iq, + float32_t * pIalpha, + float32_t * pIbeta, + float32_t sinVal, + float32_t cosVal) + { + /* Calculate pIalpha using the equation, pIalpha = Id * cosVal - Iq * sinVal */ + *pIalpha = Id * cosVal - Iq * sinVal; + + /* Calculate pIbeta using the equation, pIbeta = Id * sinVal + Iq * cosVal */ + *pIbeta = Id * sinVal + Iq * cosVal; + } + + + /** + * @brief Inverse Park transform for Q31 version + * @param[in] Id input coordinate of rotor reference frame d + * @param[in] Iq input coordinate of rotor reference frame q + * @param[out] pIalpha points to output two-phase orthogonal vector axis alpha + * @param[out] pIbeta points to output two-phase orthogonal vector axis beta + * @param[in] sinVal sine value of rotation angle theta + * @param[in] cosVal cosine value of rotation angle theta + * + * Scaling and Overflow Behavior: + * \par + * The function is implemented using an internal 32-bit accumulator. + * The accumulator maintains 1.31 format by truncating lower 31 bits of the intermediate multiplication in 2.62 format. + * There is saturation on the addition, hence there is no risk of overflow. + */ + static __INLINE void arm_inv_park_q31( + q31_t Id, + q31_t Iq, + q31_t * pIalpha, + q31_t * pIbeta, + q31_t sinVal, + q31_t cosVal) + { + q31_t product1, product2; /* Temporary variables used to store intermediate results */ + q31_t product3, product4; /* Temporary variables used to store intermediate results */ + + /* Intermediate product is calculated by (Id * cosVal) */ + product1 = (q31_t) (((q63_t) (Id) * (cosVal)) >> 31); + + /* Intermediate product is calculated by (Iq * sinVal) */ + product2 = (q31_t) (((q63_t) (Iq) * (sinVal)) >> 31); + + + /* Intermediate product is calculated by (Id * sinVal) */ + product3 = (q31_t) (((q63_t) (Id) * (sinVal)) >> 31); + + /* Intermediate product is calculated by (Iq * cosVal) */ + product4 = (q31_t) (((q63_t) (Iq) * (cosVal)) >> 31); + + /* Calculate pIalpha by using the two intermediate products 1 and 2 */ + *pIalpha = __QSUB(product1, product2); + + /* Calculate pIbeta by using the two intermediate products 3 and 4 */ + *pIbeta = __QADD(product4, product3); + } + + /** + * @} end of Inverse park group + */ + + + /** + * @brief Converts the elements of the Q31 vector to floating-point vector. + * @param[in] pSrc is input pointer + * @param[out] pDst is output pointer + * @param[in] blockSize is the number of samples to process + */ + void arm_q31_to_float( + q31_t * pSrc, + float32_t * pDst, + uint32_t blockSize); + + /** + * @ingroup groupInterpolation + */ + + /** + * @defgroup LinearInterpolate Linear Interpolation + * + * Linear interpolation is a method of curve fitting using linear polynomials. + * Linear interpolation works by effectively drawing a straight line between two neighboring samples and returning the appropriate point along that line + * + * \par + * \image html LinearInterp.gif "Linear interpolation" + * + * \par + * A Linear Interpolate function calculates an output value(y), for the input(x) + * using linear interpolation of the input values x0, x1( nearest input values) and the output values y0 and y1(nearest output values) + * + * \par Algorithm: + * 
+   *       y = y0 + (x - x0) * ((y1 - y0)/(x1-x0))
+   *       where x0, x1 are nearest values of input x
+   *             y0, y1 are nearest values to output y
+   *
+ * + * \par + * This set of functions implements Linear interpolation process + * for Q7, Q15, Q31, and floating-point data types. The functions operate on a single + * sample of data and each call to the function returns a single processed value. + * S points to an instance of the Linear Interpolate function data structure. + * x is the input sample value. The functions returns the output value. + * + * \par + * if x is outside of the table boundary, Linear interpolation returns first value of the table + * if x is below input range and returns last value of table if x is above range. + */ + + /** + * @addtogroup LinearInterpolate + * @{ + */ + + /** + * @brief Process function for the floating-point Linear Interpolation Function. + * @param[in,out] S is an instance of the floating-point Linear Interpolation structure + * @param[in] x input sample to process + * @return y processed output sample. + * + */ + static __INLINE float32_t arm_linear_interp_f32( + arm_linear_interp_instance_f32 * S, + float32_t x) + { + float32_t y; + float32_t x0, x1; /* Nearest input values */ + float32_t y0, y1; /* Nearest output values */ + float32_t xSpacing = S->xSpacing; /* spacing between input values */ + int32_t i; /* Index variable */ + float32_t *pYData = S->pYData; /* pointer to output table */ + + /* Calculation of index */ + i = (int32_t) ((x - S->x1) / xSpacing); + + if(i < 0) + { + /* Iniatilize output for below specified range as least output value of table */ + y = pYData[0]; + } + else if((uint32_t)i >= S->nValues) + { + /* Iniatilize output for above specified range as last output value of table */ + y = pYData[S->nValues - 1]; + } + else + { + /* Calculation of nearest input values */ + x0 = S->x1 + i * xSpacing; + x1 = S->x1 + (i + 1) * xSpacing; + + /* Read of nearest output values */ + y0 = pYData[i]; + y1 = pYData[i + 1]; + + /* Calculation of output */ + y = y0 + (x - x0) * ((y1 - y0) / (x1 - x0)); + + } + + /* returns output value */ + return (y); + } + + + /** + * + * @brief Process function for the Q31 Linear Interpolation Function. + * @param[in] pYData pointer to Q31 Linear Interpolation table + * @param[in] x input sample to process + * @param[in] nValues number of table values + * @return y processed output sample. + * + * \par + * Input sample x is in 12.20 format which contains 12 bits for table index and 20 bits for fractional part. + * This function can support maximum of table size 2^12. + * + */ + static __INLINE q31_t arm_linear_interp_q31( + q31_t * pYData, + q31_t x, + uint32_t nValues) + { + q31_t y; /* output */ + q31_t y0, y1; /* Nearest output values */ + q31_t fract; /* fractional part */ + int32_t index; /* Index to read nearest output values */ + + /* Input is in 12.20 format */ + /* 12 bits for the table index */ + /* Index value calculation */ + index = ((x & (q31_t)0xFFF00000) >> 20); + + if(index >= (int32_t)(nValues - 1)) + { + return (pYData[nValues - 1]); + } + else if(index < 0) + { + return (pYData[0]); + } + else + { + /* 20 bits for the fractional part */ + /* shift left by 11 to keep fract in 1.31 format */ + fract = (x & 0x000FFFFF) << 11; + + /* Read two nearest output values from the index in 1.31(q31) format */ + y0 = pYData[index]; + y1 = pYData[index + 1]; + + /* Calculation of y0 * (1-fract) and y is in 2.30 format */ + y = ((q31_t) ((q63_t) y0 * (0x7FFFFFFF - fract) >> 32)); + + /* Calculation of y0 * (1-fract) + y1 *fract and y is in 2.30 format */ + y += ((q31_t) (((q63_t) y1 * fract) >> 32)); + + /* Convert y to 1.31 format */ + return (y << 1u); + } + } + + + /** + * + * @brief Process function for the Q15 Linear Interpolation Function. + * @param[in] pYData pointer to Q15 Linear Interpolation table + * @param[in] x input sample to process + * @param[in] nValues number of table values + * @return y processed output sample. + * + * \par + * Input sample x is in 12.20 format which contains 12 bits for table index and 20 bits for fractional part. + * This function can support maximum of table size 2^12. + * + */ + static __INLINE q15_t arm_linear_interp_q15( + q15_t * pYData, + q31_t x, + uint32_t nValues) + { + q63_t y; /* output */ + q15_t y0, y1; /* Nearest output values */ + q31_t fract; /* fractional part */ + int32_t index; /* Index to read nearest output values */ + + /* Input is in 12.20 format */ + /* 12 bits for the table index */ + /* Index value calculation */ + index = ((x & (int32_t)0xFFF00000) >> 20); + + if(index >= (int32_t)(nValues - 1)) + { + return (pYData[nValues - 1]); + } + else if(index < 0) + { + return (pYData[0]); + } + else + { + /* 20 bits for the fractional part */ + /* fract is in 12.20 format */ + fract = (x & 0x000FFFFF); + + /* Read two nearest output values from the index */ + y0 = pYData[index]; + y1 = pYData[index + 1]; + + /* Calculation of y0 * (1-fract) and y is in 13.35 format */ + y = ((q63_t) y0 * (0xFFFFF - fract)); + + /* Calculation of (y0 * (1-fract) + y1 * fract) and y is in 13.35 format */ + y += ((q63_t) y1 * (fract)); + + /* convert y to 1.15 format */ + return (q15_t) (y >> 20); + } + } + + + /** + * + * @brief Process function for the Q7 Linear Interpolation Function. + * @param[in] pYData pointer to Q7 Linear Interpolation table + * @param[in] x input sample to process + * @param[in] nValues number of table values + * @return y processed output sample. + * + * \par + * Input sample x is in 12.20 format which contains 12 bits for table index and 20 bits for fractional part. + * This function can support maximum of table size 2^12. + */ + static __INLINE q7_t arm_linear_interp_q7( + q7_t * pYData, + q31_t x, + uint32_t nValues) + { + q31_t y; /* output */ + q7_t y0, y1; /* Nearest output values */ + q31_t fract; /* fractional part */ + uint32_t index; /* Index to read nearest output values */ + + /* Input is in 12.20 format */ + /* 12 bits for the table index */ + /* Index value calculation */ + if (x < 0) + { + return (pYData[0]); + } + index = (x >> 20) & 0xfff; + + if(index >= (nValues - 1)) + { + return (pYData[nValues - 1]); + } + else + { + /* 20 bits for the fractional part */ + /* fract is in 12.20 format */ + fract = (x & 0x000FFFFF); + + /* Read two nearest output values from the index and are in 1.7(q7) format */ + y0 = pYData[index]; + y1 = pYData[index + 1]; + + /* Calculation of y0 * (1-fract ) and y is in 13.27(q27) format */ + y = ((y0 * (0xFFFFF - fract))); + + /* Calculation of y1 * fract + y0 * (1-fract) and y is in 13.27(q27) format */ + y += (y1 * fract); + + /* convert y to 1.7(q7) format */ + return (q7_t) (y >> 20); + } + } + + /** + * @} end of LinearInterpolate group + */ + + /** + * @brief Fast approximation to the trigonometric sine function for floating-point data. + * @param[in] x input value in radians. + * @return sin(x). + */ + float32_t arm_sin_f32( + float32_t x); + + + /** + * @brief Fast approximation to the trigonometric sine function for Q31 data. + * @param[in] x Scaled input value in radians. + * @return sin(x). + */ + q31_t arm_sin_q31( + q31_t x); + + + /** + * @brief Fast approximation to the trigonometric sine function for Q15 data. + * @param[in] x Scaled input value in radians. + * @return sin(x). + */ + q15_t arm_sin_q15( + q15_t x); + + + /** + * @brief Fast approximation to the trigonometric cosine function for floating-point data. + * @param[in] x input value in radians. + * @return cos(x). + */ + float32_t arm_cos_f32( + float32_t x); + + + /** + * @brief Fast approximation to the trigonometric cosine function for Q31 data. + * @param[in] x Scaled input value in radians. + * @return cos(x). + */ + q31_t arm_cos_q31( + q31_t x); + + + /** + * @brief Fast approximation to the trigonometric cosine function for Q15 data. + * @param[in] x Scaled input value in radians. + * @return cos(x). + */ + q15_t arm_cos_q15( + q15_t x); + + + /** + * @ingroup groupFastMath + */ + + + /** + * @defgroup SQRT Square Root + * + * Computes the square root of a number. + * There are separate functions for Q15, Q31, and floating-point data types. + * The square root function is computed using the Newton-Raphson algorithm. + * This is an iterative algorithm of the form: + * 
+   *      x1 = x0 - f(x0)/f'(x0)
+   *
+ * where x1 is the current estimate, + * x0 is the previous estimate, and + * f'(x0) is the derivative of f() evaluated at x0. + * For the square root function, the algorithm reduces to: + * 
+   *     x0 = in/2                         [initial guess]
+   *     x1 = 1/2 * ( x0 + in / x0)        [each iteration]
+   *
+ */ + + + /** + * @addtogroup SQRT + * @{ + */ + + /** + * @brief Floating-point square root function. + * @param[in] in input value. + * @param[out] pOut square root of input value. + * @return The function returns ARM_MATH_SUCCESS if input value is positive value or ARM_MATH_ARGUMENT_ERROR if + * in is negative value and returns zero output for negative values. + */ + static __INLINE arm_status arm_sqrt_f32( + float32_t in, + float32_t * pOut) + { + if(in >= 0.0f) + { + +#if (__FPU_USED == 1) && defined ( __CC_ARM ) + *pOut = __sqrtf(in); +#elif (__FPU_USED == 1) && (defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)) + *pOut = __builtin_sqrtf(in); +#elif (__FPU_USED == 1) && defined(__GNUC__) + *pOut = __builtin_sqrtf(in); +#elif (__FPU_USED == 1) && defined ( __ICCARM__ ) && (__VER__ >= 6040000) + __ASM("VSQRT.F32 %0,%1" : "=t"(*pOut) : "t"(in)); +#else + *pOut = sqrtf(in); +#endif + + return (ARM_MATH_SUCCESS); + } + else + { + *pOut = 0.0f; + return (ARM_MATH_ARGUMENT_ERROR); + } + } + + + /** + * @brief Q31 square root function. + * @param[in] in input value. The range of the input value is [0 +1) or 0x00000000 to 0x7FFFFFFF. + * @param[out] pOut square root of input value. + * @return The function returns ARM_MATH_SUCCESS if input value is positive value or ARM_MATH_ARGUMENT_ERROR if + * in is negative value and returns zero output for negative values. + */ + arm_status arm_sqrt_q31( + q31_t in, + q31_t * pOut); + + + /** + * @brief Q15 square root function. + * @param[in] in input value. The range of the input value is [0 +1) or 0x0000 to 0x7FFF. + * @param[out] pOut square root of input value. + * @return The function returns ARM_MATH_SUCCESS if input value is positive value or ARM_MATH_ARGUMENT_ERROR if + * in is negative value and returns zero output for negative values. + */ + arm_status arm_sqrt_q15( + q15_t in, + q15_t * pOut); + + /** + * @} end of SQRT group + */ + + + /** + * @brief floating-point Circular write function. + */ + static __INLINE void arm_circularWrite_f32( + int32_t * circBuffer, + int32_t L, + uint16_t * writeOffset, + int32_t bufferInc, + const int32_t * src, + int32_t srcInc, + uint32_t blockSize) + { + uint32_t i = 0u; + int32_t wOffset; + + /* Copy the value of Index pointer that points + * to the current location where the input samples to be copied */ + wOffset = *writeOffset; + + /* Loop over the blockSize */ + i = blockSize; + + while(i > 0u) + { + /* copy the input sample to the circular buffer */ + circBuffer[wOffset] = *src; + + /* Update the input pointer */ + src += srcInc; + + /* Circularly update wOffset. Watch out for positive and negative value */ + wOffset += bufferInc; + if(wOffset >= L) + wOffset -= L; + + /* Decrement the loop counter */ + i--; + } + + /* Update the index pointer */ + *writeOffset = (uint16_t)wOffset; + } + + + + /** + * @brief floating-point Circular Read function. + */ + static __INLINE void arm_circularRead_f32( + int32_t * circBuffer, + int32_t L, + int32_t * readOffset, + int32_t bufferInc, + int32_t * dst, + int32_t * dst_base, + int32_t dst_length, + int32_t dstInc, + uint32_t blockSize) + { + uint32_t i = 0u; + int32_t rOffset, dst_end; + + /* Copy the value of Index pointer that points + * to the current location from where the input samples to be read */ + rOffset = *readOffset; + dst_end = (int32_t) (dst_base + dst_length); + + /* Loop over the blockSize */ + i = blockSize; + + while(i > 0u) + { + /* copy the sample from the circular buffer to the destination buffer */ + *dst = circBuffer[rOffset]; + + /* Update the input pointer */ + dst += dstInc; + + if(dst == (int32_t *) dst_end) + { + dst = dst_base; + } + + /* Circularly update rOffset. Watch out for positive and negative value */ + rOffset += bufferInc; + + if(rOffset >= L) + { + rOffset -= L; + } + + /* Decrement the loop counter */ + i--; + } + + /* Update the index pointer */ + *readOffset = rOffset; + } + + + /** + * @brief Q15 Circular write function. + */ + static __INLINE void arm_circularWrite_q15( + q15_t * circBuffer, + int32_t L, + uint16_t * writeOffset, + int32_t bufferInc, + const q15_t * src, + int32_t srcInc, + uint32_t blockSize) + { + uint32_t i = 0u; + int32_t wOffset; + + /* Copy the value of Index pointer that points + * to the current location where the input samples to be copied */ + wOffset = *writeOffset; + + /* Loop over the blockSize */ + i = blockSize; + + while(i > 0u) + { + /* copy the input sample to the circular buffer */ + circBuffer[wOffset] = *src; + + /* Update the input pointer */ + src += srcInc; + + /* Circularly update wOffset. Watch out for positive and negative value */ + wOffset += bufferInc; + if(wOffset >= L) + wOffset -= L; + + /* Decrement the loop counter */ + i--; + } + + /* Update the index pointer */ + *writeOffset = (uint16_t)wOffset; + } + + + /** + * @brief Q15 Circular Read function. + */ + static __INLINE void arm_circularRead_q15( + q15_t * circBuffer, + int32_t L, + int32_t * readOffset, + int32_t bufferInc, + q15_t * dst, + q15_t * dst_base, + int32_t dst_length, + int32_t dstInc, + uint32_t blockSize) + { + uint32_t i = 0; + int32_t rOffset, dst_end; + + /* Copy the value of Index pointer that points + * to the current location from where the input samples to be read */ + rOffset = *readOffset; + + dst_end = (int32_t) (dst_base + dst_length); + + /* Loop over the blockSize */ + i = blockSize; + + while(i > 0u) + { + /* copy the sample from the circular buffer to the destination buffer */ + *dst = circBuffer[rOffset]; + + /* Update the input pointer */ + dst += dstInc; + + if(dst == (q15_t *) dst_end) + { + dst = dst_base; + } + + /* Circularly update wOffset. Watch out for positive and negative value */ + rOffset += bufferInc; + + if(rOffset >= L) + { + rOffset -= L; + } + + /* Decrement the loop counter */ + i--; + } + + /* Update the index pointer */ + *readOffset = rOffset; + } + + + /** + * @brief Q7 Circular write function. + */ + static __INLINE void arm_circularWrite_q7( + q7_t * circBuffer, + int32_t L, + uint16_t * writeOffset, + int32_t bufferInc, + const q7_t * src, + int32_t srcInc, + uint32_t blockSize) + { + uint32_t i = 0u; + int32_t wOffset; + + /* Copy the value of Index pointer that points + * to the current location where the input samples to be copied */ + wOffset = *writeOffset; + + /* Loop over the blockSize */ + i = blockSize; + + while(i > 0u) + { + /* copy the input sample to the circular buffer */ + circBuffer[wOffset] = *src; + + /* Update the input pointer */ + src += srcInc; + + /* Circularly update wOffset. Watch out for positive and negative value */ + wOffset += bufferInc; + if(wOffset >= L) + wOffset -= L; + + /* Decrement the loop counter */ + i--; + } + + /* Update the index pointer */ + *writeOffset = (uint16_t)wOffset; + } + + + /** + * @brief Q7 Circular Read function. + */ + static __INLINE void arm_circularRead_q7( + q7_t * circBuffer, + int32_t L, + int32_t * readOffset, + int32_t bufferInc, + q7_t * dst, + q7_t * dst_base, + int32_t dst_length, + int32_t dstInc, + uint32_t blockSize) + { + uint32_t i = 0; + int32_t rOffset, dst_end; + + /* Copy the value of Index pointer that points + * to the current location from where the input samples to be read */ + rOffset = *readOffset; + + dst_end = (int32_t) (dst_base + dst_length); + + /* Loop over the blockSize */ + i = blockSize; + + while(i > 0u) + { + /* copy the sample from the circular buffer to the destination buffer */ + *dst = circBuffer[rOffset]; + + /* Update the input pointer */ + dst += dstInc; + + if(dst == (q7_t *) dst_end) + { + dst = dst_base; + } + + /* Circularly update rOffset. Watch out for positive and negative value */ + rOffset += bufferInc; + + if(rOffset >= L) + { + rOffset -= L; + } + + /* Decrement the loop counter */ + i--; + } + + /* Update the index pointer */ + *readOffset = rOffset; + } + + + /** + * @brief Sum of the squares of the elements of a Q31 vector. + * @param[in] pSrc is input pointer + * @param[in] blockSize is the number of samples to process + * @param[out] pResult is output value. + */ + void arm_power_q31( + q31_t * pSrc, + uint32_t blockSize, + q63_t * pResult); + + + /** + * @brief Sum of the squares of the elements of a floating-point vector. + * @param[in] pSrc is input pointer + * @param[in] blockSize is the number of samples to process + * @param[out] pResult is output value. + */ + void arm_power_f32( + float32_t * pSrc, + uint32_t blockSize, + float32_t * pResult); + + + /** + * @brief Sum of the squares of the elements of a Q15 vector. + * @param[in] pSrc is input pointer + * @param[in] blockSize is the number of samples to process + * @param[out] pResult is output value. + */ + void arm_power_q15( + q15_t * pSrc, + uint32_t blockSize, + q63_t * pResult); + + + /** + * @brief Sum of the squares of the elements of a Q7 vector. + * @param[in] pSrc is input pointer + * @param[in] blockSize is the number of samples to process + * @param[out] pResult is output value. + */ + void arm_power_q7( + q7_t * pSrc, + uint32_t blockSize, + q31_t * pResult); + + + /** + * @brief Mean value of a Q7 vector. + * @param[in] pSrc is input pointer + * @param[in] blockSize is the number of samples to process + * @param[out] pResult is output value. + */ + void arm_mean_q7( + q7_t * pSrc, + uint32_t blockSize, + q7_t * pResult); + + + /** + * @brief Mean value of a Q15 vector. + * @param[in] pSrc is input pointer + * @param[in] blockSize is the number of samples to process + * @param[out] pResult is output value. + */ + void arm_mean_q15( + q15_t * pSrc, + uint32_t blockSize, + q15_t * pResult); + + + /** + * @brief Mean value of a Q31 vector. + * @param[in] pSrc is input pointer + * @param[in] blockSize is the number of samples to process + * @param[out] pResult is output value. + */ + void arm_mean_q31( + q31_t * pSrc, + uint32_t blockSize, + q31_t * pResult); + + + /** + * @brief Mean value of a floating-point vector. + * @param[in] pSrc is input pointer + * @param[in] blockSize is the number of samples to process + * @param[out] pResult is output value. + */ + void arm_mean_f32( + float32_t * pSrc, + uint32_t blockSize, + float32_t * pResult); + + + /** + * @brief Variance of the elements of a floating-point vector. + * @param[in] pSrc is input pointer + * @param[in] blockSize is the number of samples to process + * @param[out] pResult is output value. + */ + void arm_var_f32( + float32_t * pSrc, + uint32_t blockSize, + float32_t * pResult); + + + /** + * @brief Variance of the elements of a Q31 vector. + * @param[in] pSrc is input pointer + * @param[in] blockSize is the number of samples to process + * @param[out] pResult is output value. + */ + void arm_var_q31( + q31_t * pSrc, + uint32_t blockSize, + q31_t * pResult); + + + /** + * @brief Variance of the elements of a Q15 vector. + * @param[in] pSrc is input pointer + * @param[in] blockSize is the number of samples to process + * @param[out] pResult is output value. + */ + void arm_var_q15( + q15_t * pSrc, + uint32_t blockSize, + q15_t * pResult); + + + /** + * @brief Root Mean Square of the elements of a floating-point vector. + * @param[in] pSrc is input pointer + * @param[in] blockSize is the number of samples to process + * @param[out] pResult is output value. + */ + void arm_rms_f32( + float32_t * pSrc, + uint32_t blockSize, + float32_t * pResult); + + + /** + * @brief Root Mean Square of the elements of a Q31 vector. + * @param[in] pSrc is input pointer + * @param[in] blockSize is the number of samples to process + * @param[out] pResult is output value. + */ + void arm_rms_q31( + q31_t * pSrc, + uint32_t blockSize, + q31_t * pResult); + + + /** + * @brief Root Mean Square of the elements of a Q15 vector. + * @param[in] pSrc is input pointer + * @param[in] blockSize is the number of samples to process + * @param[out] pResult is output value. + */ + void arm_rms_q15( + q15_t * pSrc, + uint32_t blockSize, + q15_t * pResult); + + + /** + * @brief Standard deviation of the elements of a floating-point vector. + * @param[in] pSrc is input pointer + * @param[in] blockSize is the number of samples to process + * @param[out] pResult is output value. + */ + void arm_std_f32( + float32_t * pSrc, + uint32_t blockSize, + float32_t * pResult); + + + /** + * @brief Standard deviation of the elements of a Q31 vector. + * @param[in] pSrc is input pointer + * @param[in] blockSize is the number of samples to process + * @param[out] pResult is output value. + */ + void arm_std_q31( + q31_t * pSrc, + uint32_t blockSize, + q31_t * pResult); + + + /** + * @brief Standard deviation of the elements of a Q15 vector. + * @param[in] pSrc is input pointer + * @param[in] blockSize is the number of samples to process + * @param[out] pResult is output value. + */ + void arm_std_q15( + q15_t * pSrc, + uint32_t blockSize, + q15_t * pResult); + + + /** + * @brief Floating-point complex magnitude + * @param[in] pSrc points to the complex input vector + * @param[out] pDst points to the real output vector + * @param[in] numSamples number of complex samples in the input vector + */ + void arm_cmplx_mag_f32( + float32_t * pSrc, + float32_t * pDst, + uint32_t numSamples); + + + /** + * @brief Q31 complex magnitude + * @param[in] pSrc points to the complex input vector + * @param[out] pDst points to the real output vector + * @param[in] numSamples number of complex samples in the input vector + */ + void arm_cmplx_mag_q31( + q31_t * pSrc, + q31_t * pDst, + uint32_t numSamples); + + + /** + * @brief Q15 complex magnitude + * @param[in] pSrc points to the complex input vector + * @param[out] pDst points to the real output vector + * @param[in] numSamples number of complex samples in the input vector + */ + void arm_cmplx_mag_q15( + q15_t * pSrc, + q15_t * pDst, + uint32_t numSamples); + + + /** + * @brief Q15 complex dot product + * @param[in] pSrcA points to the first input vector + * @param[in] pSrcB points to the second input vector + * @param[in] numSamples number of complex samples in each vector + * @param[out] realResult real part of the result returned here + * @param[out] imagResult imaginary part of the result returned here + */ + void arm_cmplx_dot_prod_q15( + q15_t * pSrcA, + q15_t * pSrcB, + uint32_t numSamples, + q31_t * realResult, + q31_t * imagResult); + + + /** + * @brief Q31 complex dot product + * @param[in] pSrcA points to the first input vector + * @param[in] pSrcB points to the second input vector + * @param[in] numSamples number of complex samples in each vector + * @param[out] realResult real part of the result returned here + * @param[out] imagResult imaginary part of the result returned here + */ + void arm_cmplx_dot_prod_q31( + q31_t * pSrcA, + q31_t * pSrcB, + uint32_t numSamples, + q63_t * realResult, + q63_t * imagResult); + + + /** + * @brief Floating-point complex dot product + * @param[in] pSrcA points to the first input vector + * @param[in] pSrcB points to the second input vector + * @param[in] numSamples number of complex samples in each vector + * @param[out] realResult real part of the result returned here + * @param[out] imagResult imaginary part of the result returned here + */ + void arm_cmplx_dot_prod_f32( + float32_t * pSrcA, + float32_t * pSrcB, + uint32_t numSamples, + float32_t * realResult, + float32_t * imagResult); + + + /** + * @brief Q15 complex-by-real multiplication + * @param[in] pSrcCmplx points to the complex input vector + * @param[in] pSrcReal points to the real input vector + * @param[out] pCmplxDst points to the complex output vector + * @param[in] numSamples number of samples in each vector + */ + void arm_cmplx_mult_real_q15( + q15_t * pSrcCmplx, + q15_t * pSrcReal, + q15_t * pCmplxDst, + uint32_t numSamples); + + + /** + * @brief Q31 complex-by-real multiplication + * @param[in] pSrcCmplx points to the complex input vector + * @param[in] pSrcReal points to the real input vector + * @param[out] pCmplxDst points to the complex output vector + * @param[in] numSamples number of samples in each vector + */ + void arm_cmplx_mult_real_q31( + q31_t * pSrcCmplx, + q31_t * pSrcReal, + q31_t * pCmplxDst, + uint32_t numSamples); + + + /** + * @brief Floating-point complex-by-real multiplication + * @param[in] pSrcCmplx points to the complex input vector + * @param[in] pSrcReal points to the real input vector + * @param[out] pCmplxDst points to the complex output vector + * @param[in] numSamples number of samples in each vector + */ + void arm_cmplx_mult_real_f32( + float32_t * pSrcCmplx, + float32_t * pSrcReal, + float32_t * pCmplxDst, + uint32_t numSamples); + + + /** + * @brief Minimum value of a Q7 vector. + * @param[in] pSrc is input pointer + * @param[in] blockSize is the number of samples to process + * @param[out] result is output pointer + * @param[in] index is the array index of the minimum value in the input buffer. + */ + void arm_min_q7( + q7_t * pSrc, + uint32_t blockSize, + q7_t * result, + uint32_t * index); + + + /** + * @brief Minimum value of a Q15 vector. + * @param[in] pSrc is input pointer + * @param[in] blockSize is the number of samples to process + * @param[out] pResult is output pointer + * @param[in] pIndex is the array index of the minimum value in the input buffer. + */ + void arm_min_q15( + q15_t * pSrc, + uint32_t blockSize, + q15_t * pResult, + uint32_t * pIndex); + + + /** + * @brief Minimum value of a Q31 vector. + * @param[in] pSrc is input pointer + * @param[in] blockSize is the number of samples to process + * @param[out] pResult is output pointer + * @param[out] pIndex is the array index of the minimum value in the input buffer. + */ + void arm_min_q31( + q31_t * pSrc, + uint32_t blockSize, + q31_t * pResult, + uint32_t * pIndex); + + + /** + * @brief Minimum value of a floating-point vector. + * @param[in] pSrc is input pointer + * @param[in] blockSize is the number of samples to process + * @param[out] pResult is output pointer + * @param[out] pIndex is the array index of the minimum value in the input buffer. + */ + void arm_min_f32( + float32_t * pSrc, + uint32_t blockSize, + float32_t * pResult, + uint32_t * pIndex); + + +/** + * @brief Maximum value of a Q7 vector. + * @param[in] pSrc points to the input buffer + * @param[in] blockSize length of the input vector + * @param[out] pResult maximum value returned here + * @param[out] pIndex index of maximum value returned here + */ + void arm_max_q7( + q7_t * pSrc, + uint32_t blockSize, + q7_t * pResult, + uint32_t * pIndex); + + +/** + * @brief Maximum value of a Q15 vector. + * @param[in] pSrc points to the input buffer + * @param[in] blockSize length of the input vector + * @param[out] pResult maximum value returned here + * @param[out] pIndex index of maximum value returned here + */ + void arm_max_q15( + q15_t * pSrc, + uint32_t blockSize, + q15_t * pResult, + uint32_t * pIndex); + + +/** + * @brief Maximum value of a Q31 vector. + * @param[in] pSrc points to the input buffer + * @param[in] blockSize length of the input vector + * @param[out] pResult maximum value returned here + * @param[out] pIndex index of maximum value returned here + */ + void arm_max_q31( + q31_t * pSrc, + uint32_t blockSize, + q31_t * pResult, + uint32_t * pIndex); + + +/** + * @brief Maximum value of a floating-point vector. + * @param[in] pSrc points to the input buffer + * @param[in] blockSize length of the input vector + * @param[out] pResult maximum value returned here + * @param[out] pIndex index of maximum value returned here + */ + void arm_max_f32( + float32_t * pSrc, + uint32_t blockSize, + float32_t * pResult, + uint32_t * pIndex); + + + /** + * @brief Q15 complex-by-complex multiplication + * @param[in] pSrcA points to the first input vector + * @param[in] pSrcB points to the second input vector + * @param[out] pDst points to the output vector + * @param[in] numSamples number of complex samples in each vector + */ + void arm_cmplx_mult_cmplx_q15( + q15_t * pSrcA, + q15_t * pSrcB, + q15_t * pDst, + uint32_t numSamples); + + + /** + * @brief Q31 complex-by-complex multiplication + * @param[in] pSrcA points to the first input vector + * @param[in] pSrcB points to the second input vector + * @param[out] pDst points to the output vector + * @param[in] numSamples number of complex samples in each vector + */ + void arm_cmplx_mult_cmplx_q31( + q31_t * pSrcA, + q31_t * pSrcB, + q31_t * pDst, + uint32_t numSamples); + + + /** + * @brief Floating-point complex-by-complex multiplication + * @param[in] pSrcA points to the first input vector + * @param[in] pSrcB points to the second input vector + * @param[out] pDst points to the output vector + * @param[in] numSamples number of complex samples in each vector + */ + void arm_cmplx_mult_cmplx_f32( + float32_t * pSrcA, + float32_t * pSrcB, + float32_t * pDst, + uint32_t numSamples); + + + /** + * @brief Converts the elements of the floating-point vector to Q31 vector. + * @param[in] pSrc points to the floating-point input vector + * @param[out] pDst points to the Q31 output vector + * @param[in] blockSize length of the input vector + */ + void arm_float_to_q31( + float32_t * pSrc, + q31_t * pDst, + uint32_t blockSize); + + + /** + * @brief Converts the elements of the floating-point vector to Q15 vector. + * @param[in] pSrc points to the floating-point input vector + * @param[out] pDst points to the Q15 output vector + * @param[in] blockSize length of the input vector + */ + void arm_float_to_q15( + float32_t * pSrc, + q15_t * pDst, + uint32_t blockSize); + + + /** + * @brief Converts the elements of the floating-point vector to Q7 vector. + * @param[in] pSrc points to the floating-point input vector + * @param[out] pDst points to the Q7 output vector + * @param[in] blockSize length of the input vector + */ + void arm_float_to_q7( + float32_t * pSrc, + q7_t * pDst, + uint32_t blockSize); + + + /** + * @brief Converts the elements of the Q31 vector to Q15 vector. + * @param[in] pSrc is input pointer + * @param[out] pDst is output pointer + * @param[in] blockSize is the number of samples to process + */ + void arm_q31_to_q15( + q31_t * pSrc, + q15_t * pDst, + uint32_t blockSize); + + + /** + * @brief Converts the elements of the Q31 vector to Q7 vector. + * @param[in] pSrc is input pointer + * @param[out] pDst is output pointer + * @param[in] blockSize is the number of samples to process + */ + void arm_q31_to_q7( + q31_t * pSrc, + q7_t * pDst, + uint32_t blockSize); + + + /** + * @brief Converts the elements of the Q15 vector to floating-point vector. + * @param[in] pSrc is input pointer + * @param[out] pDst is output pointer + * @param[in] blockSize is the number of samples to process + */ + void arm_q15_to_float( + q15_t * pSrc, + float32_t * pDst, + uint32_t blockSize); + + + /** + * @brief Converts the elements of the Q15 vector to Q31 vector. + * @param[in] pSrc is input pointer + * @param[out] pDst is output pointer + * @param[in] blockSize is the number of samples to process + */ + void arm_q15_to_q31( + q15_t * pSrc, + q31_t * pDst, + uint32_t blockSize); + + + /** + * @brief Converts the elements of the Q15 vector to Q7 vector. + * @param[in] pSrc is input pointer + * @param[out] pDst is output pointer + * @param[in] blockSize is the number of samples to process + */ + void arm_q15_to_q7( + q15_t * pSrc, + q7_t * pDst, + uint32_t blockSize); + + + /** + * @ingroup groupInterpolation + */ + + /** + * @defgroup BilinearInterpolate Bilinear Interpolation + * + * Bilinear interpolation is an extension of linear interpolation applied to a two dimensional grid. + * The underlying function f(x, y) is sampled on a regular grid and the interpolation process + * determines values between the grid points. + * Bilinear interpolation is equivalent to two step linear interpolation, first in the x-dimension and then in the y-dimension. + * Bilinear interpolation is often used in image processing to rescale images. + * The CMSIS DSP library provides bilinear interpolation functions for Q7, Q15, Q31, and floating-point data types. + * + * Algorithm + * \par + * The instance structure used by the bilinear interpolation functions describes a two dimensional data table. + * For floating-point, the instance structure is defined as: + * 
+   *   typedef struct
+   *   {
+   *     uint16_t numRows;
+   *     uint16_t numCols;
+   *     float32_t *pData;
+   * } arm_bilinear_interp_instance_f32;
+   *
+ * + * \par + * where numRows specifies the number of rows in the table; + * numCols specifies the number of columns in the table; + * and pData points to an array of size numRows*numCols values. + * The data table pTable is organized in row order and the supplied data values fall on integer indexes. + * That is, table element (x,y) is located at pTable[x + y*numCols] where x and y are integers. + * + * \par + * Let (x, y) specify the desired interpolation point. Then define: + * 
+   *     XF = floor(x)
+   *     YF = floor(y)
+   *
+ * \par + * The interpolated output point is computed as: + * 
+   *  f(x, y) = f(XF, YF) * (1-(x-XF)) * (1-(y-YF))
+   *           + f(XF+1, YF) * (x-XF)*(1-(y-YF))
+   *           + f(XF, YF+1) * (1-(x-XF))*(y-YF)
+   *           + f(XF+1, YF+1) * (x-XF)*(y-YF)
+   *
+ * Note that the coordinates (x, y) contain integer and fractional components. + * The integer components specify which portion of the table to use while the + * fractional components control the interpolation processor. + * + * \par + * if (x,y) are outside of the table boundary, Bilinear interpolation returns zero output. + */ + + /** + * @addtogroup BilinearInterpolate + * @{ + */ + + + /** + * + * @brief Floating-point bilinear interpolation. + * @param[in,out] S points to an instance of the interpolation structure. + * @param[in] X interpolation coordinate. + * @param[in] Y interpolation coordinate. + * @return out interpolated value. + */ + static __INLINE float32_t arm_bilinear_interp_f32( + const arm_bilinear_interp_instance_f32 * S, + float32_t X, + float32_t Y) + { + float32_t out; + float32_t f00, f01, f10, f11; + float32_t *pData = S->pData; + int32_t xIndex, yIndex, index; + float32_t xdiff, ydiff; + float32_t b1, b2, b3, b4; + + xIndex = (int32_t) X; + yIndex = (int32_t) Y; + + /* Care taken for table outside boundary */ + /* Returns zero output when values are outside table boundary */ + if(xIndex < 0 || xIndex > (S->numRows - 1) || yIndex < 0 || yIndex > (S->numCols - 1)) + { + return (0); + } + + /* Calculation of index for two nearest points in X-direction */ + index = (xIndex - 1) + (yIndex - 1) * S->numCols; + + + /* Read two nearest points in X-direction */ + f00 = pData[index]; + f01 = pData[index + 1]; + + /* Calculation of index for two nearest points in Y-direction */ + index = (xIndex - 1) + (yIndex) * S->numCols; + + + /* Read two nearest points in Y-direction */ + f10 = pData[index]; + f11 = pData[index + 1]; + + /* Calculation of intermediate values */ + b1 = f00; + b2 = f01 - f00; + b3 = f10 - f00; + b4 = f00 - f01 - f10 + f11; + + /* Calculation of fractional part in X */ + xdiff = X - xIndex; + + /* Calculation of fractional part in Y */ + ydiff = Y - yIndex; + + /* Calculation of bi-linear interpolated output */ + out = b1 + b2 * xdiff + b3 * ydiff + b4 * xdiff * ydiff; + + /* return to application */ + return (out); + } + + + /** + * + * @brief Q31 bilinear interpolation. + * @param[in,out] S points to an instance of the interpolation structure. + * @param[in] X interpolation coordinate in 12.20 format. + * @param[in] Y interpolation coordinate in 12.20 format. + * @return out interpolated value. + */ + static __INLINE q31_t arm_bilinear_interp_q31( + arm_bilinear_interp_instance_q31 * S, + q31_t X, + q31_t Y) + { + q31_t out; /* Temporary output */ + q31_t acc = 0; /* output */ + q31_t xfract, yfract; /* X, Y fractional parts */ + q31_t x1, x2, y1, y2; /* Nearest output values */ + int32_t rI, cI; /* Row and column indices */ + q31_t *pYData = S->pData; /* pointer to output table values */ + uint32_t nCols = S->numCols; /* num of rows */ + + /* Input is in 12.20 format */ + /* 12 bits for the table index */ + /* Index value calculation */ + rI = ((X & (q31_t)0xFFF00000) >> 20); + + /* Input is in 12.20 format */ + /* 12 bits for the table index */ + /* Index value calculation */ + cI = ((Y & (q31_t)0xFFF00000) >> 20); + + /* Care taken for table outside boundary */ + /* Returns zero output when values are outside table boundary */ + if(rI < 0 || rI > (S->numRows - 1) || cI < 0 || cI > (S->numCols - 1)) + { + return (0); + } + + /* 20 bits for the fractional part */ + /* shift left xfract by 11 to keep 1.31 format */ + xfract = (X & 0x000FFFFF) << 11u; + + /* Read two nearest output values from the index */ + x1 = pYData[(rI) + (int32_t)nCols * (cI) ]; + x2 = pYData[(rI) + (int32_t)nCols * (cI) + 1]; + + /* 20 bits for the fractional part */ + /* shift left yfract by 11 to keep 1.31 format */ + yfract = (Y & 0x000FFFFF) << 11u; + + /* Read two nearest output values from the index */ + y1 = pYData[(rI) + (int32_t)nCols * (cI + 1) ]; + y2 = pYData[(rI) + (int32_t)nCols * (cI + 1) + 1]; + + /* Calculation of x1 * (1-xfract ) * (1-yfract) and acc is in 3.29(q29) format */ + out = ((q31_t) (((q63_t) x1 * (0x7FFFFFFF - xfract)) >> 32)); + acc = ((q31_t) (((q63_t) out * (0x7FFFFFFF - yfract)) >> 32)); + + /* x2 * (xfract) * (1-yfract) in 3.29(q29) and adding to acc */ + out = ((q31_t) ((q63_t) x2 * (0x7FFFFFFF - yfract) >> 32)); + acc += ((q31_t) ((q63_t) out * (xfract) >> 32)); + + /* y1 * (1 - xfract) * (yfract) in 3.29(q29) and adding to acc */ + out = ((q31_t) ((q63_t) y1 * (0x7FFFFFFF - xfract) >> 32)); + acc += ((q31_t) ((q63_t) out * (yfract) >> 32)); + + /* y2 * (xfract) * (yfract) in 3.29(q29) and adding to acc */ + out = ((q31_t) ((q63_t) y2 * (xfract) >> 32)); + acc += ((q31_t) ((q63_t) out * (yfract) >> 32)); + + /* Convert acc to 1.31(q31) format */ + return ((q31_t)(acc << 2)); + } + + + /** + * @brief Q15 bilinear interpolation. + * @param[in,out] S points to an instance of the interpolation structure. + * @param[in] X interpolation coordinate in 12.20 format. + * @param[in] Y interpolation coordinate in 12.20 format. + * @return out interpolated value. + */ + static __INLINE q15_t arm_bilinear_interp_q15( + arm_bilinear_interp_instance_q15 * S, + q31_t X, + q31_t Y) + { + q63_t acc = 0; /* output */ + q31_t out; /* Temporary output */ + q15_t x1, x2, y1, y2; /* Nearest output values */ + q31_t xfract, yfract; /* X, Y fractional parts */ + int32_t rI, cI; /* Row and column indices */ + q15_t *pYData = S->pData; /* pointer to output table values */ + uint32_t nCols = S->numCols; /* num of rows */ + + /* Input is in 12.20 format */ + /* 12 bits for the table index */ + /* Index value calculation */ + rI = ((X & (q31_t)0xFFF00000) >> 20); + + /* Input is in 12.20 format */ + /* 12 bits for the table index */ + /* Index value calculation */ + cI = ((Y & (q31_t)0xFFF00000) >> 20); + + /* Care taken for table outside boundary */ + /* Returns zero output when values are outside table boundary */ + if(rI < 0 || rI > (S->numRows - 1) || cI < 0 || cI > (S->numCols - 1)) + { + return (0); + } + + /* 20 bits for the fractional part */ + /* xfract should be in 12.20 format */ + xfract = (X & 0x000FFFFF); + + /* Read two nearest output values from the index */ + x1 = pYData[((uint32_t)rI) + nCols * ((uint32_t)cI) ]; + x2 = pYData[((uint32_t)rI) + nCols * ((uint32_t)cI) + 1]; + + /* 20 bits for the fractional part */ + /* yfract should be in 12.20 format */ + yfract = (Y & 0x000FFFFF); + + /* Read two nearest output values from the index */ + y1 = pYData[((uint32_t)rI) + nCols * ((uint32_t)cI + 1) ]; + y2 = pYData[((uint32_t)rI) + nCols * ((uint32_t)cI + 1) + 1]; + + /* Calculation of x1 * (1-xfract ) * (1-yfract) and acc is in 13.51 format */ + + /* x1 is in 1.15(q15), xfract in 12.20 format and out is in 13.35 format */ + /* convert 13.35 to 13.31 by right shifting and out is in 1.31 */ + out = (q31_t) (((q63_t) x1 * (0xFFFFF - xfract)) >> 4u); + acc = ((q63_t) out * (0xFFFFF - yfract)); + + /* x2 * (xfract) * (1-yfract) in 1.51 and adding to acc */ + out = (q31_t) (((q63_t) x2 * (0xFFFFF - yfract)) >> 4u); + acc += ((q63_t) out * (xfract)); + + /* y1 * (1 - xfract) * (yfract) in 1.51 and adding to acc */ + out = (q31_t) (((q63_t) y1 * (0xFFFFF - xfract)) >> 4u); + acc += ((q63_t) out * (yfract)); + + /* y2 * (xfract) * (yfract) in 1.51 and adding to acc */ + out = (q31_t) (((q63_t) y2 * (xfract)) >> 4u); + acc += ((q63_t) out * (yfract)); + + /* acc is in 13.51 format and down shift acc by 36 times */ + /* Convert out to 1.15 format */ + return ((q15_t)(acc >> 36)); + } + + + /** + * @brief Q7 bilinear interpolation. + * @param[in,out] S points to an instance of the interpolation structure. + * @param[in] X interpolation coordinate in 12.20 format. + * @param[in] Y interpolation coordinate in 12.20 format. + * @return out interpolated value. + */ + static __INLINE q7_t arm_bilinear_interp_q7( + arm_bilinear_interp_instance_q7 * S, + q31_t X, + q31_t Y) + { + q63_t acc = 0; /* output */ + q31_t out; /* Temporary output */ + q31_t xfract, yfract; /* X, Y fractional parts */ + q7_t x1, x2, y1, y2; /* Nearest output values */ + int32_t rI, cI; /* Row and column indices */ + q7_t *pYData = S->pData; /* pointer to output table values */ + uint32_t nCols = S->numCols; /* num of rows */ + + /* Input is in 12.20 format */ + /* 12 bits for the table index */ + /* Index value calculation */ + rI = ((X & (q31_t)0xFFF00000) >> 20); + + /* Input is in 12.20 format */ + /* 12 bits for the table index */ + /* Index value calculation */ + cI = ((Y & (q31_t)0xFFF00000) >> 20); + + /* Care taken for table outside boundary */ + /* Returns zero output when values are outside table boundary */ + if(rI < 0 || rI > (S->numRows - 1) || cI < 0 || cI > (S->numCols - 1)) + { + return (0); + } + + /* 20 bits for the fractional part */ + /* xfract should be in 12.20 format */ + xfract = (X & (q31_t)0x000FFFFF); + + /* Read two nearest output values from the index */ + x1 = pYData[((uint32_t)rI) + nCols * ((uint32_t)cI) ]; + x2 = pYData[((uint32_t)rI) + nCols * ((uint32_t)cI) + 1]; + + /* 20 bits for the fractional part */ + /* yfract should be in 12.20 format */ + yfract = (Y & (q31_t)0x000FFFFF); + + /* Read two nearest output values from the index */ + y1 = pYData[((uint32_t)rI) + nCols * ((uint32_t)cI + 1) ]; + y2 = pYData[((uint32_t)rI) + nCols * ((uint32_t)cI + 1) + 1]; + + /* Calculation of x1 * (1-xfract ) * (1-yfract) and acc is in 16.47 format */ + out = ((x1 * (0xFFFFF - xfract))); + acc = (((q63_t) out * (0xFFFFF - yfract))); + + /* x2 * (xfract) * (1-yfract) in 2.22 and adding to acc */ + out = ((x2 * (0xFFFFF - yfract))); + acc += (((q63_t) out * (xfract))); + + /* y1 * (1 - xfract) * (yfract) in 2.22 and adding to acc */ + out = ((y1 * (0xFFFFF - xfract))); + acc += (((q63_t) out * (yfract))); + + /* y2 * (xfract) * (yfract) in 2.22 and adding to acc */ + out = ((y2 * (yfract))); + acc += (((q63_t) out * (xfract))); + + /* acc in 16.47 format and down shift by 40 to convert to 1.7 format */ + return ((q7_t)(acc >> 40)); + } + + /** + * @} end of BilinearInterpolate group + */ + + +/* SMMLAR */ +#define multAcc_32x32_keep32_R(a, x, y) \ + a = (q31_t) (((((q63_t) a) << 32) + ((q63_t) x * y) + 0x80000000LL ) >> 32) + +/* SMMLSR */ +#define multSub_32x32_keep32_R(a, x, y) \ + a = (q31_t) (((((q63_t) a) << 32) - ((q63_t) x * y) + 0x80000000LL ) >> 32) + +/* SMMULR */ +#define mult_32x32_keep32_R(a, x, y) \ + a = (q31_t) (((q63_t) x * y + 0x80000000LL ) >> 32) + +/* SMMLA */ +#define multAcc_32x32_keep32(a, x, y) \ + a += (q31_t) (((q63_t) x * y) >> 32) + +/* SMMLS */ +#define multSub_32x32_keep32(a, x, y) \ + a -= (q31_t) (((q63_t) x * y) >> 32) + +/* SMMUL */ +#define mult_32x32_keep32(a, x, y) \ + a = (q31_t) (((q63_t) x * y ) >> 32) + + +#if defined ( __CC_ARM ) + /* Enter low optimization region - place directly above function definition */ + #if defined( ARM_MATH_CM4 ) || defined( ARM_MATH_CM7) + #define LOW_OPTIMIZATION_ENTER \ + _Pragma ("push") \ + _Pragma ("O1") + #else + #define LOW_OPTIMIZATION_ENTER + #endif + + /* Exit low optimization region - place directly after end of function definition */ + #if defined( ARM_MATH_CM4 ) || defined( ARM_MATH_CM7) + #define LOW_OPTIMIZATION_EXIT \ + _Pragma ("pop") + #else + #define LOW_OPTIMIZATION_EXIT + #endif + + /* Enter low optimization region - place directly above function definition */ + #define IAR_ONLY_LOW_OPTIMIZATION_ENTER + + /* Exit low optimization region - place directly after end of function definition */ + #define IAR_ONLY_LOW_OPTIMIZATION_EXIT + +#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #define LOW_OPTIMIZATION_ENTER + #define LOW_OPTIMIZATION_EXIT + #define IAR_ONLY_LOW_OPTIMIZATION_ENTER + #define IAR_ONLY_LOW_OPTIMIZATION_EXIT + +#elif defined(__GNUC__) + #define LOW_OPTIMIZATION_ENTER __attribute__(( optimize("-O1") )) + #define LOW_OPTIMIZATION_EXIT + #define IAR_ONLY_LOW_OPTIMIZATION_ENTER + #define IAR_ONLY_LOW_OPTIMIZATION_EXIT + +#elif defined(__ICCARM__) + /* Enter low optimization region - place directly above function definition */ + #if defined( ARM_MATH_CM4 ) || defined( ARM_MATH_CM7) + #define LOW_OPTIMIZATION_ENTER \ + _Pragma ("optimize=low") + #else + #define LOW_OPTIMIZATION_ENTER + #endif + + /* Exit low optimization region - place directly after end of function definition */ + #define LOW_OPTIMIZATION_EXIT + + /* Enter low optimization region - place directly above function definition */ + #if defined( ARM_MATH_CM4 ) || defined( ARM_MATH_CM7) + #define IAR_ONLY_LOW_OPTIMIZATION_ENTER \ + _Pragma ("optimize=low") + #else + #define IAR_ONLY_LOW_OPTIMIZATION_ENTER + #endif + + /* Exit low optimization region - place directly after end of function definition */ + #define IAR_ONLY_LOW_OPTIMIZATION_EXIT + +#elif defined(__CSMC__) + #define LOW_OPTIMIZATION_ENTER + #define LOW_OPTIMIZATION_EXIT + #define IAR_ONLY_LOW_OPTIMIZATION_ENTER + #define IAR_ONLY_LOW_OPTIMIZATION_EXIT + +#elif defined(__TASKING__) + #define LOW_OPTIMIZATION_ENTER + #define LOW_OPTIMIZATION_EXIT + #define IAR_ONLY_LOW_OPTIMIZATION_ENTER + #define IAR_ONLY_LOW_OPTIMIZATION_EXIT + +#endif + + +#ifdef __cplusplus +} +#endif + + +#if defined ( __GNUC__ ) +#pragma GCC diagnostic pop +#endif + +#endif /* _ARM_MATH_H */ + +/** + * + * End of file. + */ diff --git a/src/boards/mcu/stm32/cmsis/cmsis_armcc.h b/src/boards/mcu/stm32/cmsis/cmsis_armcc.h new file mode 100755 index 0000000..f2bb66a --- /dev/null +++ b/src/boards/mcu/stm32/cmsis/cmsis_armcc.h @@ -0,0 +1,734 @@ +/**************************************************************************//** + * @file cmsis_armcc.h + * @brief CMSIS Cortex-M Core Function/Instruction Header File + * @version V4.30 + * @date 20. October 2015 + ******************************************************************************/ +/* Copyright (c) 2009 - 2015 ARM LIMITED + + All rights reserved. + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are met: + - Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + - Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + - Neither the name of ARM nor the names of its contributors may be used + to endorse or promote products derived from this software without + specific prior written permission. + * + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + POSSIBILITY OF SUCH DAMAGE. + ---------------------------------------------------------------------------*/ + + +#ifndef __CMSIS_ARMCC_H +#define __CMSIS_ARMCC_H + + +#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 400677) + #error "Please use ARM Compiler Toolchain V4.0.677 or later!" +#endif + +/* ########################### Core Function Access ########################### */ +/** \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions + @{ + */ + +/* intrinsic void __enable_irq(); */ +/* intrinsic void __disable_irq(); */ + +/** + \brief Get Control Register + \details Returns the content of the Control Register. + \return Control Register value + */ +__STATIC_INLINE uint32_t __get_CONTROL(void) +{ + register uint32_t __regControl __ASM("control"); + return(__regControl); +} + + +/** + \brief Set Control Register + \details Writes the given value to the Control Register. + \param [in] control Control Register value to set + */ +__STATIC_INLINE void __set_CONTROL(uint32_t control) +{ + register uint32_t __regControl __ASM("control"); + __regControl = control; +} + + +/** + \brief Get IPSR Register + \details Returns the content of the IPSR Register. + \return IPSR Register value + */ +__STATIC_INLINE uint32_t __get_IPSR(void) +{ + register uint32_t __regIPSR __ASM("ipsr"); + return(__regIPSR); +} + + +/** + \brief Get APSR Register + \details Returns the content of the APSR Register. + \return APSR Register value + */ +__STATIC_INLINE uint32_t __get_APSR(void) +{ + register uint32_t __regAPSR __ASM("apsr"); + return(__regAPSR); +} + + +/** + \brief Get xPSR Register + \details Returns the content of the xPSR Register. + \return xPSR Register value + */ +__STATIC_INLINE uint32_t __get_xPSR(void) +{ + register uint32_t __regXPSR __ASM("xpsr"); + return(__regXPSR); +} + + +/** + \brief Get Process Stack Pointer + \details Returns the current value of the Process Stack Pointer (PSP). + \return PSP Register value + */ +__STATIC_INLINE uint32_t __get_PSP(void) +{ + register uint32_t __regProcessStackPointer __ASM("psp"); + return(__regProcessStackPointer); +} + + +/** + \brief Set Process Stack Pointer + \details Assigns the given value to the Process Stack Pointer (PSP). + \param [in] topOfProcStack Process Stack Pointer value to set + */ +__STATIC_INLINE void __set_PSP(uint32_t topOfProcStack) +{ + register uint32_t __regProcessStackPointer __ASM("psp"); + __regProcessStackPointer = topOfProcStack; +} + + +/** + \brief Get Main Stack Pointer + \details Returns the current value of the Main Stack Pointer (MSP). + \return MSP Register value + */ +__STATIC_INLINE uint32_t __get_MSP(void) +{ + register uint32_t __regMainStackPointer __ASM("msp"); + return(__regMainStackPointer); +} + + +/** + \brief Set Main Stack Pointer + \details Assigns the given value to the Main Stack Pointer (MSP). + \param [in] topOfMainStack Main Stack Pointer value to set + */ +__STATIC_INLINE void __set_MSP(uint32_t topOfMainStack) +{ + register uint32_t __regMainStackPointer __ASM("msp"); + __regMainStackPointer = topOfMainStack; +} + + +/** + \brief Get Priority Mask + \details Returns the current state of the priority mask bit from the Priority Mask Register. + \return Priority Mask value + */ +__STATIC_INLINE uint32_t __get_PRIMASK(void) +{ + register uint32_t __regPriMask __ASM("primask"); + return(__regPriMask); +} + + +/** + \brief Set Priority Mask + \details Assigns the given value to the Priority Mask Register. + \param [in] priMask Priority Mask + */ +__STATIC_INLINE void __set_PRIMASK(uint32_t priMask) +{ + register uint32_t __regPriMask __ASM("primask"); + __regPriMask = (priMask); +} + + +#if (__CORTEX_M >= 0x03U) || (__CORTEX_SC >= 300U) + +/** + \brief Enable FIQ + \details Enables FIQ interrupts by clearing the F-bit in the CPSR. + Can only be executed in Privileged modes. + */ +#define __enable_fault_irq __enable_fiq + + +/** + \brief Disable FIQ + \details Disables FIQ interrupts by setting the F-bit in the CPSR. + Can only be executed in Privileged modes. + */ +#define __disable_fault_irq __disable_fiq + + +/** + \brief Get Base Priority + \details Returns the current value of the Base Priority register. + \return Base Priority register value + */ +__STATIC_INLINE uint32_t __get_BASEPRI(void) +{ + register uint32_t __regBasePri __ASM("basepri"); + return(__regBasePri); +} + + +/** + \brief Set Base Priority + \details Assigns the given value to the Base Priority register. + \param [in] basePri Base Priority value to set + */ +__STATIC_INLINE void __set_BASEPRI(uint32_t basePri) +{ + register uint32_t __regBasePri __ASM("basepri"); + __regBasePri = (basePri & 0xFFU); +} + + +/** + \brief Set Base Priority with condition + \details Assigns the given value to the Base Priority register only if BASEPRI masking is disabled, + or the new value increases the BASEPRI priority level. + \param [in] basePri Base Priority value to set + */ +__STATIC_INLINE void __set_BASEPRI_MAX(uint32_t basePri) +{ + register uint32_t __regBasePriMax __ASM("basepri_max"); + __regBasePriMax = (basePri & 0xFFU); +} + + +/** + \brief Get Fault Mask + \details Returns the current value of the Fault Mask register. + \return Fault Mask register value + */ +__STATIC_INLINE uint32_t __get_FAULTMASK(void) +{ + register uint32_t __regFaultMask __ASM("faultmask"); + return(__regFaultMask); +} + + +/** + \brief Set Fault Mask + \details Assigns the given value to the Fault Mask register. + \param [in] faultMask Fault Mask value to set + */ +__STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask) +{ + register uint32_t __regFaultMask __ASM("faultmask"); + __regFaultMask = (faultMask & (uint32_t)1); +} + +#endif /* (__CORTEX_M >= 0x03U) || (__CORTEX_SC >= 300U) */ + + +#if (__CORTEX_M == 0x04U) || (__CORTEX_M == 0x07U) + +/** + \brief Get FPSCR + \details Returns the current value of the Floating Point Status/Control register. + \return Floating Point Status/Control register value + */ +__STATIC_INLINE uint32_t __get_FPSCR(void) +{ +#if (__FPU_PRESENT == 1U) && (__FPU_USED == 1U) + register uint32_t __regfpscr __ASM("fpscr"); + return(__regfpscr); +#else + return(0U); +#endif +} + + +/** + \brief Set FPSCR + \details Assigns the given value to the Floating Point Status/Control register. + \param [in] fpscr Floating Point Status/Control value to set + */ +__STATIC_INLINE void __set_FPSCR(uint32_t fpscr) +{ +#if (__FPU_PRESENT == 1U) && (__FPU_USED == 1U) + register uint32_t __regfpscr __ASM("fpscr"); + __regfpscr = (fpscr); +#endif +} + +#endif /* (__CORTEX_M == 0x04U) || (__CORTEX_M == 0x07U) */ + + + +/*@} end of CMSIS_Core_RegAccFunctions */ + + +/* ########################## Core Instruction Access ######################### */ +/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface + Access to dedicated instructions + @{ +*/ + +/** + \brief No Operation + \details No Operation does nothing. This instruction can be used for code alignment purposes. + */ +#define __NOP __nop + + +/** + \brief Wait For Interrupt + \details Wait For Interrupt is a hint instruction that suspends execution until one of a number of events occurs. + */ +#define __WFI __wfi + + +/** + \brief Wait For Event + \details Wait For Event is a hint instruction that permits the processor to enter + a low-power state until one of a number of events occurs. + */ +#define __WFE __wfe + + +/** + \brief Send Event + \details Send Event is a hint instruction. It causes an event to be signaled to the CPU. + */ +#define __SEV __sev + + +/** + \brief Instruction Synchronization Barrier + \details Instruction Synchronization Barrier flushes the pipeline in the processor, + so that all instructions following the ISB are fetched from cache or memory, + after the instruction has been completed. + */ +#define __ISB() do {\ + __schedule_barrier();\ + __isb(0xF);\ + __schedule_barrier();\ + } while (0U) + +/** + \brief Data Synchronization Barrier + \details Acts as a special kind of Data Memory Barrier. + It completes when all explicit memory accesses before this instruction complete. + */ +#define __DSB() do {\ + __schedule_barrier();\ + __dsb(0xF);\ + __schedule_barrier();\ + } while (0U) + +/** + \brief Data Memory Barrier + \details Ensures the apparent order of the explicit memory operations before + and after the instruction, without ensuring their completion. + */ +#define __DMB() do {\ + __schedule_barrier();\ + __dmb(0xF);\ + __schedule_barrier();\ + } while (0U) + +/** + \brief Reverse byte order (32 bit) + \details Reverses the byte order in integer value. + \param [in] value Value to reverse + \return Reversed value + */ +#define __REV __rev + + +/** + \brief Reverse byte order (16 bit) + \details Reverses the byte order in two unsigned short values. + \param [in] value Value to reverse + \return Reversed value + */ +#ifndef __NO_EMBEDDED_ASM +__attribute__((section(".rev16_text"))) __STATIC_INLINE __ASM uint32_t __REV16(uint32_t value) +{ + rev16 r0, r0 + bx lr +} +#endif + +/** + \brief Reverse byte order in signed short value + \details Reverses the byte order in a signed short value with sign extension to integer. + \param [in] value Value to reverse + \return Reversed value + */ +#ifndef __NO_EMBEDDED_ASM +__attribute__((section(".revsh_text"))) __STATIC_INLINE __ASM int32_t __REVSH(int32_t value) +{ + revsh r0, r0 + bx lr +} +#endif + + +/** + \brief Rotate Right in unsigned value (32 bit) + \details Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits. + \param [in] value Value to rotate + \param [in] value Number of Bits to rotate + \return Rotated value + */ +#define __ROR __ror + + +/** + \brief Breakpoint + \details Causes the processor to enter Debug state. + Debug tools can use this to investigate system state when the instruction at a particular address is reached. + \param [in] value is ignored by the processor. + If required, a debugger can use it to store additional information about the breakpoint. + */ +#define __BKPT(value) __breakpoint(value) + + +/** + \brief Reverse bit order of value + \details Reverses the bit order of the given value. + \param [in] value Value to reverse + \return Reversed value + */ +#if (__CORTEX_M >= 0x03U) || (__CORTEX_SC >= 300U) + #define __RBIT __rbit +#else +__attribute__((always_inline)) __STATIC_INLINE uint32_t __RBIT(uint32_t value) +{ + uint32_t result; + int32_t s = 4 /*sizeof(v)*/ * 8 - 1; /* extra shift needed at end */ + + result = value; /* r will be reversed bits of v; first get LSB of v */ + for (value >>= 1U; value; value >>= 1U) + { + result <<= 1U; + result |= value & 1U; + s--; + } + result <<= s; /* shift when v's highest bits are zero */ + return(result); +} +#endif + + +/** + \brief Count leading zeros + \details Counts the number of leading zeros of a data value. + \param [in] value Value to count the leading zeros + \return number of leading zeros in value + */ +#define __CLZ __clz + + +#if (__CORTEX_M >= 0x03U) || (__CORTEX_SC >= 300U) + +/** + \brief LDR Exclusive (8 bit) + \details Executes a exclusive LDR instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020) + #define __LDREXB(ptr) ((uint8_t ) __ldrex(ptr)) +#else + #define __LDREXB(ptr) _Pragma("push") _Pragma("diag_suppress 3731") ((uint8_t ) __ldrex(ptr)) _Pragma("pop") +#endif + + +/** + \brief LDR Exclusive (16 bit) + \details Executes a exclusive LDR instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020) + #define __LDREXH(ptr) ((uint16_t) __ldrex(ptr)) +#else + #define __LDREXH(ptr) _Pragma("push") _Pragma("diag_suppress 3731") ((uint16_t) __ldrex(ptr)) _Pragma("pop") +#endif + + +/** + \brief LDR Exclusive (32 bit) + \details Executes a exclusive LDR instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020) + #define __LDREXW(ptr) ((uint32_t ) __ldrex(ptr)) +#else + #define __LDREXW(ptr) _Pragma("push") _Pragma("diag_suppress 3731") ((uint32_t ) __ldrex(ptr)) _Pragma("pop") +#endif + + +/** + \brief STR Exclusive (8 bit) + \details Executes a exclusive STR instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020) + #define __STREXB(value, ptr) __strex(value, ptr) +#else + #define __STREXB(value, ptr) _Pragma("push") _Pragma("diag_suppress 3731") __strex(value, ptr) _Pragma("pop") +#endif + + +/** + \brief STR Exclusive (16 bit) + \details Executes a exclusive STR instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020) + #define __STREXH(value, ptr) __strex(value, ptr) +#else + #define __STREXH(value, ptr) _Pragma("push") _Pragma("diag_suppress 3731") __strex(value, ptr) _Pragma("pop") +#endif + + +/** + \brief STR Exclusive (32 bit) + \details Executes a exclusive STR instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020) + #define __STREXW(value, ptr) __strex(value, ptr) +#else + #define __STREXW(value, ptr) _Pragma("push") _Pragma("diag_suppress 3731") __strex(value, ptr) _Pragma("pop") +#endif + + +/** + \brief Remove the exclusive lock + \details Removes the exclusive lock which is created by LDREX. + */ +#define __CLREX __clrex + + +/** + \brief Signed Saturate + \details Saturates a signed value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (1..32) + \return Saturated value + */ +#define __SSAT __ssat + + +/** + \brief Unsigned Saturate + \details Saturates an unsigned value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (0..31) + \return Saturated value + */ +#define __USAT __usat + + +/** + \brief Rotate Right with Extend (32 bit) + \details Moves each bit of a bitstring right by one bit. + The carry input is shifted in at the left end of the bitstring. + \param [in] value Value to rotate + \return Rotated value + */ +#ifndef __NO_EMBEDDED_ASM +__attribute__((section(".rrx_text"))) __STATIC_INLINE __ASM uint32_t __RRX(uint32_t value) +{ + rrx r0, r0 + bx lr +} +#endif + + +/** + \brief LDRT Unprivileged (8 bit) + \details Executes a Unprivileged LDRT instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +#define __LDRBT(ptr) ((uint8_t ) __ldrt(ptr)) + + +/** + \brief LDRT Unprivileged (16 bit) + \details Executes a Unprivileged LDRT instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +#define __LDRHT(ptr) ((uint16_t) __ldrt(ptr)) + + +/** + \brief LDRT Unprivileged (32 bit) + \details Executes a Unprivileged LDRT instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +#define __LDRT(ptr) ((uint32_t ) __ldrt(ptr)) + + +/** + \brief STRT Unprivileged (8 bit) + \details Executes a Unprivileged STRT instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +#define __STRBT(value, ptr) __strt(value, ptr) + + +/** + \brief STRT Unprivileged (16 bit) + \details Executes a Unprivileged STRT instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +#define __STRHT(value, ptr) __strt(value, ptr) + + +/** + \brief STRT Unprivileged (32 bit) + \details Executes a Unprivileged STRT instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +#define __STRT(value, ptr) __strt(value, ptr) + +#endif /* (__CORTEX_M >= 0x03U) || (__CORTEX_SC >= 300U) */ + +/*@}*/ /* end of group CMSIS_Core_InstructionInterface */ + + +/* ################### Compiler specific Intrinsics ########################### */ +/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics + Access to dedicated SIMD instructions + @{ +*/ + +#if (__CORTEX_M >= 0x04U) /* only for Cortex-M4 and above */ + +#define __SADD8 __sadd8 +#define __QADD8 __qadd8 +#define __SHADD8 __shadd8 +#define __UADD8 __uadd8 +#define __UQADD8 __uqadd8 +#define __UHADD8 __uhadd8 +#define __SSUB8 __ssub8 +#define __QSUB8 __qsub8 +#define __SHSUB8 __shsub8 +#define __USUB8 __usub8 +#define __UQSUB8 __uqsub8 +#define __UHSUB8 __uhsub8 +#define __SADD16 __sadd16 +#define __QADD16 __qadd16 +#define __SHADD16 __shadd16 +#define __UADD16 __uadd16 +#define __UQADD16 __uqadd16 +#define __UHADD16 __uhadd16 +#define __SSUB16 __ssub16 +#define __QSUB16 __qsub16 +#define __SHSUB16 __shsub16 +#define __USUB16 __usub16 +#define __UQSUB16 __uqsub16 +#define __UHSUB16 __uhsub16 +#define __SASX __sasx +#define __QASX __qasx +#define __SHASX __shasx +#define __UASX __uasx +#define __UQASX __uqasx +#define __UHASX __uhasx +#define __SSAX __ssax +#define __QSAX __qsax +#define __SHSAX __shsax +#define __USAX __usax +#define __UQSAX __uqsax +#define __UHSAX __uhsax +#define __USAD8 __usad8 +#define __USADA8 __usada8 +#define __SSAT16 __ssat16 +#define __USAT16 __usat16 +#define __UXTB16 __uxtb16 +#define __UXTAB16 __uxtab16 +#define __SXTB16 __sxtb16 +#define __SXTAB16 __sxtab16 +#define __SMUAD __smuad +#define __SMUADX __smuadx +#define __SMLAD __smlad +#define __SMLADX __smladx +#define __SMLALD __smlald +#define __SMLALDX __smlaldx +#define __SMUSD __smusd +#define __SMUSDX __smusdx +#define __SMLSD __smlsd +#define __SMLSDX __smlsdx +#define __SMLSLD __smlsld +#define __SMLSLDX __smlsldx +#define __SEL __sel +#define __QADD __qadd +#define __QSUB __qsub + +#define __PKHBT(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0x0000FFFFUL) | \ + ((((uint32_t)(ARG2)) << (ARG3)) & 0xFFFF0000UL) ) + +#define __PKHTB(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0xFFFF0000UL) | \ + ((((uint32_t)(ARG2)) >> (ARG3)) & 0x0000FFFFUL) ) + +#define __SMMLA(ARG1,ARG2,ARG3) ( (int32_t)((((int64_t)(ARG1) * (ARG2)) + \ + ((int64_t)(ARG3) << 32U) ) >> 32U)) + +#endif /* (__CORTEX_M >= 0x04) */ +/*@} end of group CMSIS_SIMD_intrinsics */ + + +#endif /* __CMSIS_ARMCC_H */ diff --git a/src/boards/mcu/stm32/cmsis/cmsis_armcc_V6.h b/src/boards/mcu/stm32/cmsis/cmsis_armcc_V6.h new file mode 100755 index 0000000..d714e9b --- /dev/null +++ b/src/boards/mcu/stm32/cmsis/cmsis_armcc_V6.h @@ -0,0 +1,1800 @@ +/**************************************************************************//** + * @file cmsis_armcc_V6.h + * @brief CMSIS Cortex-M Core Function/Instruction Header File + * @version V4.30 + * @date 20. October 2015 + ******************************************************************************/ +/* Copyright (c) 2009 - 2015 ARM LIMITED + + All rights reserved. + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are met: + - Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + - Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + - Neither the name of ARM nor the names of its contributors may be used + to endorse or promote products derived from this software without + specific prior written permission. + * + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + POSSIBILITY OF SUCH DAMAGE. + ---------------------------------------------------------------------------*/ + + +#ifndef __CMSIS_ARMCC_V6_H +#define __CMSIS_ARMCC_V6_H + + +/* ########################### Core Function Access ########################### */ +/** \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions + @{ + */ + +/** + \brief Enable IRQ Interrupts + \details Enables IRQ interrupts by clearing the I-bit in the CPSR. + Can only be executed in Privileged modes. + */ +__attribute__((always_inline)) __STATIC_INLINE void __enable_irq(void) +{ + __ASM volatile ("cpsie i" : : : "memory"); +} + + +/** + \brief Disable IRQ Interrupts + \details Disables IRQ interrupts by setting the I-bit in the CPSR. + Can only be executed in Privileged modes. + */ +__attribute__((always_inline)) __STATIC_INLINE void __disable_irq(void) +{ + __ASM volatile ("cpsid i" : : : "memory"); +} + + +/** + \brief Get Control Register + \details Returns the content of the Control Register. + \return Control Register value + */ +__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_CONTROL(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, control" : "=r" (result) ); + return(result); +} + + +#if (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get Control Register (non-secure) + \details Returns the content of the non-secure Control Register when in secure mode. + \return non-secure Control Register value + */ +__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_CONTROL_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, control_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Control Register + \details Writes the given value to the Control Register. + \param [in] control Control Register value to set + */ +__attribute__((always_inline)) __STATIC_INLINE void __set_CONTROL(uint32_t control) +{ + __ASM volatile ("MSR control, %0" : : "r" (control) : "memory"); +} + + +#if (__ARM_FEATURE_CMSE == 3U) +/** + \brief Set Control Register (non-secure) + \details Writes the given value to the non-secure Control Register when in secure state. + \param [in] control Control Register value to set + */ +__attribute__((always_inline)) __STATIC_INLINE void __TZ_set_CONTROL_NS(uint32_t control) +{ + __ASM volatile ("MSR control_ns, %0" : : "r" (control) : "memory"); +} +#endif + + +/** + \brief Get IPSR Register + \details Returns the content of the IPSR Register. + \return IPSR Register value + */ +__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_IPSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, ipsr" : "=r" (result) ); + return(result); +} + + +#if (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get IPSR Register (non-secure) + \details Returns the content of the non-secure IPSR Register when in secure state. + \return IPSR Register value + */ +__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_IPSR_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, ipsr_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Get APSR Register + \details Returns the content of the APSR Register. + \return APSR Register value + */ +__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_APSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, apsr" : "=r" (result) ); + return(result); +} + + +#if (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get APSR Register (non-secure) + \details Returns the content of the non-secure APSR Register when in secure state. + \return APSR Register value + */ +__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_APSR_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, apsr_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Get xPSR Register + \details Returns the content of the xPSR Register. + \return xPSR Register value + */ +__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_xPSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, xpsr" : "=r" (result) ); + return(result); +} + + +#if (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get xPSR Register (non-secure) + \details Returns the content of the non-secure xPSR Register when in secure state. + \return xPSR Register value + */ +__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_xPSR_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, xpsr_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Get Process Stack Pointer + \details Returns the current value of the Process Stack Pointer (PSP). + \return PSP Register value + */ +__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_PSP(void) +{ + register uint32_t result; + + __ASM volatile ("MRS %0, psp" : "=r" (result) ); + return(result); +} + + +#if (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get Process Stack Pointer (non-secure) + \details Returns the current value of the non-secure Process Stack Pointer (PSP) when in secure state. + \return PSP Register value + */ +__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_PSP_NS(void) +{ + register uint32_t result; + + __ASM volatile ("MRS %0, psp_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Process Stack Pointer + \details Assigns the given value to the Process Stack Pointer (PSP). + \param [in] topOfProcStack Process Stack Pointer value to set + */ +__attribute__((always_inline)) __STATIC_INLINE void __set_PSP(uint32_t topOfProcStack) +{ + __ASM volatile ("MSR psp, %0" : : "r" (topOfProcStack) : "sp"); +} + + +#if (__ARM_FEATURE_CMSE == 3U) +/** + \brief Set Process Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Process Stack Pointer (PSP) when in secure state. + \param [in] topOfProcStack Process Stack Pointer value to set + */ +__attribute__((always_inline)) __STATIC_INLINE void __TZ_set_PSP_NS(uint32_t topOfProcStack) +{ + __ASM volatile ("MSR psp_ns, %0" : : "r" (topOfProcStack) : "sp"); +} +#endif + + +/** + \brief Get Main Stack Pointer + \details Returns the current value of the Main Stack Pointer (MSP). + \return MSP Register value + */ +__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_MSP(void) +{ + register uint32_t result; + + __ASM volatile ("MRS %0, msp" : "=r" (result) ); + return(result); +} + + +#if (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get Main Stack Pointer (non-secure) + \details Returns the current value of the non-secure Main Stack Pointer (MSP) when in secure state. + \return MSP Register value + */ +__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_MSP_NS(void) +{ + register uint32_t result; + + __ASM volatile ("MRS %0, msp_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Main Stack Pointer + \details Assigns the given value to the Main Stack Pointer (MSP). + \param [in] topOfMainStack Main Stack Pointer value to set + */ +__attribute__((always_inline)) __STATIC_INLINE void __set_MSP(uint32_t topOfMainStack) +{ + __ASM volatile ("MSR msp, %0" : : "r" (topOfMainStack) : "sp"); +} + + +#if (__ARM_FEATURE_CMSE == 3U) +/** + \brief Set Main Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Main Stack Pointer (MSP) when in secure state. + \param [in] topOfMainStack Main Stack Pointer value to set + */ +__attribute__((always_inline)) __STATIC_INLINE void __TZ_set_MSP_NS(uint32_t topOfMainStack) +{ + __ASM volatile ("MSR msp_ns, %0" : : "r" (topOfMainStack) : "sp"); +} +#endif + + +/** + \brief Get Priority Mask + \details Returns the current state of the priority mask bit from the Priority Mask Register. + \return Priority Mask value + */ +__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_PRIMASK(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, primask" : "=r" (result) ); + return(result); +} + + +#if (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get Priority Mask (non-secure) + \details Returns the current state of the non-secure priority mask bit from the Priority Mask Register when in secure state. + \return Priority Mask value + */ +__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_PRIMASK_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, primask_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Priority Mask + \details Assigns the given value to the Priority Mask Register. + \param [in] priMask Priority Mask + */ +__attribute__((always_inline)) __STATIC_INLINE void __set_PRIMASK(uint32_t priMask) +{ + __ASM volatile ("MSR primask, %0" : : "r" (priMask) : "memory"); +} + + +#if (__ARM_FEATURE_CMSE == 3U) +/** + \brief Set Priority Mask (non-secure) + \details Assigns the given value to the non-secure Priority Mask Register when in secure state. + \param [in] priMask Priority Mask + */ +__attribute__((always_inline)) __STATIC_INLINE void __TZ_set_PRIMASK_NS(uint32_t priMask) +{ + __ASM volatile ("MSR primask_ns, %0" : : "r" (priMask) : "memory"); +} +#endif + + +#if ((__ARM_ARCH_7M__ == 1U) || (__ARM_ARCH_7EM__ == 1U) || (__ARM_ARCH_8M__ == 1U)) /* ToDo: ARMCC_V6: check if this is ok for cortex >=3 */ + +/** + \brief Enable FIQ + \details Enables FIQ interrupts by clearing the F-bit in the CPSR. + Can only be executed in Privileged modes. + */ +__attribute__((always_inline)) __STATIC_INLINE void __enable_fault_irq(void) +{ + __ASM volatile ("cpsie f" : : : "memory"); +} + + +/** + \brief Disable FIQ + \details Disables FIQ interrupts by setting the F-bit in the CPSR. + Can only be executed in Privileged modes. + */ +__attribute__((always_inline)) __STATIC_INLINE void __disable_fault_irq(void) +{ + __ASM volatile ("cpsid f" : : : "memory"); +} + + +/** + \brief Get Base Priority + \details Returns the current value of the Base Priority register. + \return Base Priority register value + */ +__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_BASEPRI(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, basepri" : "=r" (result) ); + return(result); +} + + +#if (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get Base Priority (non-secure) + \details Returns the current value of the non-secure Base Priority register when in secure state. + \return Base Priority register value + */ +__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_BASEPRI_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, basepri_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Base Priority + \details Assigns the given value to the Base Priority register. + \param [in] basePri Base Priority value to set + */ +__attribute__((always_inline)) __STATIC_INLINE void __set_BASEPRI(uint32_t value) +{ + __ASM volatile ("MSR basepri, %0" : : "r" (value) : "memory"); +} + + +#if (__ARM_FEATURE_CMSE == 3U) +/** + \brief Set Base Priority (non-secure) + \details Assigns the given value to the non-secure Base Priority register when in secure state. + \param [in] basePri Base Priority value to set + */ +__attribute__((always_inline)) __STATIC_INLINE void __TZ_set_BASEPRI_NS(uint32_t value) +{ + __ASM volatile ("MSR basepri_ns, %0" : : "r" (value) : "memory"); +} +#endif + + +/** + \brief Set Base Priority with condition + \details Assigns the given value to the Base Priority register only if BASEPRI masking is disabled, + or the new value increases the BASEPRI priority level. + \param [in] basePri Base Priority value to set + */ +__attribute__((always_inline)) __STATIC_INLINE void __set_BASEPRI_MAX(uint32_t value) +{ + __ASM volatile ("MSR basepri_max, %0" : : "r" (value) : "memory"); +} + + +#if (__ARM_FEATURE_CMSE == 3U) +/** + \brief Set Base Priority with condition (non_secure) + \details Assigns the given value to the non-secure Base Priority register when in secure state only if BASEPRI masking is disabled, + or the new value increases the BASEPRI priority level. + \param [in] basePri Base Priority value to set + */ +__attribute__((always_inline)) __STATIC_INLINE void __TZ_set_BASEPRI_MAX_NS(uint32_t value) +{ + __ASM volatile ("MSR basepri_max_ns, %0" : : "r" (value) : "memory"); +} +#endif + + +/** + \brief Get Fault Mask + \details Returns the current value of the Fault Mask register. + \return Fault Mask register value + */ +__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_FAULTMASK(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, faultmask" : "=r" (result) ); + return(result); +} + + +#if (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get Fault Mask (non-secure) + \details Returns the current value of the non-secure Fault Mask register when in secure state. + \return Fault Mask register value + */ +__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_FAULTMASK_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, faultmask_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Fault Mask + \details Assigns the given value to the Fault Mask register. + \param [in] faultMask Fault Mask value to set + */ +__attribute__((always_inline)) __STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask) +{ + __ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) : "memory"); +} + + +#if (__ARM_FEATURE_CMSE == 3U) +/** + \brief Set Fault Mask (non-secure) + \details Assigns the given value to the non-secure Fault Mask register when in secure state. + \param [in] faultMask Fault Mask value to set + */ +__attribute__((always_inline)) __STATIC_INLINE void __TZ_set_FAULTMASK_NS(uint32_t faultMask) +{ + __ASM volatile ("MSR faultmask_ns, %0" : : "r" (faultMask) : "memory"); +} +#endif + + +#endif /* ((__ARM_ARCH_7M__ == 1U) || (__ARM_ARCH_8M__ == 1U)) */ + + +#if (__ARM_ARCH_8M__ == 1U) + +/** + \brief Get Process Stack Pointer Limit + \details Returns the current value of the Process Stack Pointer Limit (PSPLIM). + \return PSPLIM Register value + */ +__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_PSPLIM(void) +{ + register uint32_t result; + + __ASM volatile ("MRS %0, psplim" : "=r" (result) ); + return(result); +} + + +#if (__ARM_FEATURE_CMSE == 3U) && (__ARM_ARCH_PROFILE == 'M') /* ToDo: ARMCC_V6: check predefined macro for mainline */ +/** + \brief Get Process Stack Pointer Limit (non-secure) + \details Returns the current value of the non-secure Process Stack Pointer Limit (PSPLIM) when in secure state. + \return PSPLIM Register value + */ +__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_PSPLIM_NS(void) +{ + register uint32_t result; + + __ASM volatile ("MRS %0, psplim_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Process Stack Pointer Limit + \details Assigns the given value to the Process Stack Pointer Limit (PSPLIM). + \param [in] ProcStackPtrLimit Process Stack Pointer Limit value to set + */ +__attribute__((always_inline)) __STATIC_INLINE void __set_PSPLIM(uint32_t ProcStackPtrLimit) +{ + __ASM volatile ("MSR psplim, %0" : : "r" (ProcStackPtrLimit)); +} + + +#if (__ARM_FEATURE_CMSE == 3U) && (__ARM_ARCH_PROFILE == 'M') /* ToDo: ARMCC_V6: check predefined macro for mainline */ +/** + \brief Set Process Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Process Stack Pointer Limit (PSPLIM) when in secure state. + \param [in] ProcStackPtrLimit Process Stack Pointer Limit value to set + */ +__attribute__((always_inline)) __STATIC_INLINE void __TZ_set_PSPLIM_NS(uint32_t ProcStackPtrLimit) +{ + __ASM volatile ("MSR psplim_ns, %0\n" : : "r" (ProcStackPtrLimit)); +} +#endif + + +/** + \brief Get Main Stack Pointer Limit + \details Returns the current value of the Main Stack Pointer Limit (MSPLIM). + \return MSPLIM Register value + */ +__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_MSPLIM(void) +{ + register uint32_t result; + + __ASM volatile ("MRS %0, msplim" : "=r" (result) ); + + return(result); +} + + +#if (__ARM_FEATURE_CMSE == 3U) && (__ARM_ARCH_PROFILE == 'M') /* ToDo: ARMCC_V6: check predefined macro for mainline */ +/** + \brief Get Main Stack Pointer Limit (non-secure) + \details Returns the current value of the non-secure Main Stack Pointer Limit(MSPLIM) when in secure state. + \return MSPLIM Register value + */ +__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_MSPLIM_NS(void) +{ + register uint32_t result; + + __ASM volatile ("MRS %0, msplim_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Main Stack Pointer Limit + \details Assigns the given value to the Main Stack Pointer Limit (MSPLIM). + \param [in] MainStackPtrLimit Main Stack Pointer Limit value to set + */ +__attribute__((always_inline)) __STATIC_INLINE void __set_MSPLIM(uint32_t MainStackPtrLimit) +{ + __ASM volatile ("MSR msplim, %0" : : "r" (MainStackPtrLimit)); +} + + +#if (__ARM_FEATURE_CMSE == 3U) && (__ARM_ARCH_PROFILE == 'M') /* ToDo: ARMCC_V6: check predefined macro for mainline */ +/** + \brief Set Main Stack Pointer Limit (non-secure) + \details Assigns the given value to the non-secure Main Stack Pointer Limit (MSPLIM) when in secure state. + \param [in] MainStackPtrLimit Main Stack Pointer value to set + */ +__attribute__((always_inline)) __STATIC_INLINE void __TZ_set_MSPLIM_NS(uint32_t MainStackPtrLimit) +{ + __ASM volatile ("MSR msplim_ns, %0" : : "r" (MainStackPtrLimit)); +} +#endif + +#endif /* (__ARM_ARCH_8M__ == 1U) */ + + +#if ((__ARM_ARCH_7EM__ == 1U) || (__ARM_ARCH_8M__ == 1U)) /* ToDo: ARMCC_V6: check if this is ok for cortex >=4 */ + +/** + \brief Get FPSCR + \details eturns the current value of the Floating Point Status/Control register. + \return Floating Point Status/Control register value + */ +#define __get_FPSCR __builtin_arm_get_fpscr +#if 0 +__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_FPSCR(void) +{ +#if (__FPU_PRESENT == 1U) && (__FPU_USED == 1U) + uint32_t result; + + __ASM volatile (""); /* Empty asm statement works as a scheduling barrier */ + __ASM volatile ("VMRS %0, fpscr" : "=r" (result) ); + __ASM volatile (""); + return(result); +#else + return(0); +#endif +} +#endif + +#if (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get FPSCR (non-secure) + \details Returns the current value of the non-secure Floating Point Status/Control register when in secure state. + \return Floating Point Status/Control register value + */ +__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_FPSCR_NS(void) +{ +#if (__FPU_PRESENT == 1U) && (__FPU_USED == 1U) + uint32_t result; + + __ASM volatile (""); /* Empty asm statement works as a scheduling barrier */ + __ASM volatile ("VMRS %0, fpscr_ns" : "=r" (result) ); + __ASM volatile (""); + return(result); +#else + return(0); +#endif +} +#endif + + +/** + \brief Set FPSCR + \details Assigns the given value to the Floating Point Status/Control register. + \param [in] fpscr Floating Point Status/Control value to set + */ +#define __set_FPSCR __builtin_arm_set_fpscr +#if 0 +__attribute__((always_inline)) __STATIC_INLINE void __set_FPSCR(uint32_t fpscr) +{ +#if (__FPU_PRESENT == 1U) && (__FPU_USED == 1U) + __ASM volatile (""); /* Empty asm statement works as a scheduling barrier */ + __ASM volatile ("VMSR fpscr, %0" : : "r" (fpscr) : "vfpcc"); + __ASM volatile (""); +#endif +} +#endif + +#if (__ARM_FEATURE_CMSE == 3U) +/** + \brief Set FPSCR (non-secure) + \details Assigns the given value to the non-secure Floating Point Status/Control register when in secure state. + \param [in] fpscr Floating Point Status/Control value to set + */ +__attribute__((always_inline)) __STATIC_INLINE void __TZ_set_FPSCR_NS(uint32_t fpscr) +{ +#if (__FPU_PRESENT == 1U) && (__FPU_USED == 1U) + __ASM volatile (""); /* Empty asm statement works as a scheduling barrier */ + __ASM volatile ("VMSR fpscr_ns, %0" : : "r" (fpscr) : "vfpcc"); + __ASM volatile (""); +#endif +} +#endif + +#endif /* ((__ARM_ARCH_7EM__ == 1U) || (__ARM_ARCH_8M__ == 1U)) */ + + + +/*@} end of CMSIS_Core_RegAccFunctions */ + + +/* ########################## Core Instruction Access ######################### */ +/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface + Access to dedicated instructions + @{ +*/ + +/* Define macros for porting to both thumb1 and thumb2. + * For thumb1, use low register (r0-r7), specified by constraint "l" + * Otherwise, use general registers, specified by constraint "r" */ +#if defined (__thumb__) && !defined (__thumb2__) +#define __CMSIS_GCC_OUT_REG(r) "=l" (r) +#define __CMSIS_GCC_USE_REG(r) "l" (r) +#else +#define __CMSIS_GCC_OUT_REG(r) "=r" (r) +#define __CMSIS_GCC_USE_REG(r) "r" (r) +#endif + +/** + \brief No Operation + \details No Operation does nothing. This instruction can be used for code alignment purposes. + */ +#define __NOP __builtin_arm_nop + +/** + \brief Wait For Interrupt + \details Wait For Interrupt is a hint instruction that suspends execution until one of a number of events occurs. + */ +#define __WFI __builtin_arm_wfi + + +/** + \brief Wait For Event + \details Wait For Event is a hint instruction that permits the processor to enter + a low-power state until one of a number of events occurs. + */ +#define __WFE __builtin_arm_wfe + + +/** + \brief Send Event + \details Send Event is a hint instruction. It causes an event to be signaled to the CPU. + */ +#define __SEV __builtin_arm_sev + + +/** + \brief Instruction Synchronization Barrier + \details Instruction Synchronization Barrier flushes the pipeline in the processor, + so that all instructions following the ISB are fetched from cache or memory, + after the instruction has been completed. + */ +#define __ISB() __builtin_arm_isb(0xF); + +/** + \brief Data Synchronization Barrier + \details Acts as a special kind of Data Memory Barrier. + It completes when all explicit memory accesses before this instruction complete. + */ +#define __DSB() __builtin_arm_dsb(0xF); + + +/** + \brief Data Memory Barrier + \details Ensures the apparent order of the explicit memory operations before + and after the instruction, without ensuring their completion. + */ +#define __DMB() __builtin_arm_dmb(0xF); + + +/** + \brief Reverse byte order (32 bit) + \details Reverses the byte order in integer value. + \param [in] value Value to reverse + \return Reversed value + */ +#define __REV __builtin_bswap32 + + +/** + \brief Reverse byte order (16 bit) + \details Reverses the byte order in two unsigned short values. + \param [in] value Value to reverse + \return Reversed value + */ +#define __REV16 __builtin_bswap16 /* ToDo: ARMCC_V6: check if __builtin_bswap16 could be used */ +#if 0 +__attribute__((always_inline)) __STATIC_INLINE uint32_t __REV16(uint32_t value) +{ + uint32_t result; + + __ASM volatile ("rev16 %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); + return(result); +} +#endif + + +/** + \brief Reverse byte order in signed short value + \details Reverses the byte order in a signed short value with sign extension to integer. + \param [in] value Value to reverse + \return Reversed value + */ + /* ToDo: ARMCC_V6: check if __builtin_bswap16 could be used */ +__attribute__((always_inline)) __STATIC_INLINE int32_t __REVSH(int32_t value) +{ + int32_t result; + + __ASM volatile ("revsh %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); + return(result); +} + + +/** + \brief Rotate Right in unsigned value (32 bit) + \details Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits. + \param [in] op1 Value to rotate + \param [in] op2 Number of Bits to rotate + \return Rotated value + */ +__attribute__((always_inline)) __STATIC_INLINE uint32_t __ROR(uint32_t op1, uint32_t op2) +{ + return (op1 >> op2) | (op1 << (32U - op2)); +} + + +/** + \brief Breakpoint + \details Causes the processor to enter Debug state. + Debug tools can use this to investigate system state when the instruction at a particular address is reached. + \param [in] value is ignored by the processor. + If required, a debugger can use it to store additional information about the breakpoint. + */ +#define __BKPT(value) __ASM volatile ("bkpt "#value) + + +/** + \brief Reverse bit order of value + \details Reverses the bit order of the given value. + \param [in] value Value to reverse + \return Reversed value + */ + /* ToDo: ARMCC_V6: check if __builtin_arm_rbit is supported */ +__attribute__((always_inline)) __STATIC_INLINE uint32_t __RBIT(uint32_t value) +{ + uint32_t result; + +#if ((__ARM_ARCH_7M__ == 1U) || (__ARM_ARCH_7EM__ == 1U) || (__ARM_ARCH_8M__ == 1U)) /* ToDo: ARMCC_V6: check if this is ok for cortex >=3 */ + __ASM volatile ("rbit %0, %1" : "=r" (result) : "r" (value) ); +#else + int32_t s = 4 /*sizeof(v)*/ * 8 - 1; /* extra shift needed at end */ + + result = value; /* r will be reversed bits of v; first get LSB of v */ + for (value >>= 1U; value; value >>= 1U) + { + result <<= 1U; + result |= value & 1U; + s--; + } + result <<= s; /* shift when v's highest bits are zero */ +#endif + return(result); +} + + +/** + \brief Count leading zeros + \details Counts the number of leading zeros of a data value. + \param [in] value Value to count the leading zeros + \return number of leading zeros in value + */ +#define __CLZ __builtin_clz + + +#if ((__ARM_ARCH_7M__ == 1U) || (__ARM_ARCH_7EM__ == 1U) || (__ARM_ARCH_8M__ == 1U)) /* ToDo: ARMCC_V6: check if this is ok for cortex >=3 */ + +/** + \brief LDR Exclusive (8 bit) + \details Executes a exclusive LDR instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +#define __LDREXB (uint8_t)__builtin_arm_ldrex + + +/** + \brief LDR Exclusive (16 bit) + \details Executes a exclusive LDR instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +#define __LDREXH (uint16_t)__builtin_arm_ldrex + + +/** + \brief LDR Exclusive (32 bit) + \details Executes a exclusive LDR instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +#define __LDREXW (uint32_t)__builtin_arm_ldrex + + +/** + \brief STR Exclusive (8 bit) + \details Executes a exclusive STR instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STREXB (uint32_t)__builtin_arm_strex + + +/** + \brief STR Exclusive (16 bit) + \details Executes a exclusive STR instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STREXH (uint32_t)__builtin_arm_strex + + +/** + \brief STR Exclusive (32 bit) + \details Executes a exclusive STR instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STREXW (uint32_t)__builtin_arm_strex + + +/** + \brief Remove the exclusive lock + \details Removes the exclusive lock which is created by LDREX. + */ +#define __CLREX __builtin_arm_clrex + + +/** + \brief Signed Saturate + \details Saturates a signed value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (1..32) + \return Saturated value + */ +/*#define __SSAT __builtin_arm_ssat*/ +#define __SSAT(ARG1,ARG2) \ +({ \ + int32_t __RES, __ARG1 = (ARG1); \ + __ASM ("ssat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ + __RES; \ + }) + + +/** + \brief Unsigned Saturate + \details Saturates an unsigned value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (0..31) + \return Saturated value + */ +#define __USAT __builtin_arm_usat +#if 0 +#define __USAT(ARG1,ARG2) \ +({ \ + uint32_t __RES, __ARG1 = (ARG1); \ + __ASM ("usat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ + __RES; \ + }) +#endif + + +/** + \brief Rotate Right with Extend (32 bit) + \details Moves each bit of a bitstring right by one bit. + The carry input is shifted in at the left end of the bitstring. + \param [in] value Value to rotate + \return Rotated value + */ +__attribute__((always_inline)) __STATIC_INLINE uint32_t __RRX(uint32_t value) +{ + uint32_t result; + + __ASM volatile ("rrx %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); + return(result); +} + + +/** + \brief LDRT Unprivileged (8 bit) + \details Executes a Unprivileged LDRT instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__attribute__((always_inline)) __STATIC_INLINE uint8_t __LDRBT(volatile uint8_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldrbt %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint8_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDRT Unprivileged (16 bit) + \details Executes a Unprivileged LDRT instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__attribute__((always_inline)) __STATIC_INLINE uint16_t __LDRHT(volatile uint16_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldrht %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint16_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDRT Unprivileged (32 bit) + \details Executes a Unprivileged LDRT instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__attribute__((always_inline)) __STATIC_INLINE uint32_t __LDRT(volatile uint32_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldrt %0, %1" : "=r" (result) : "Q" (*ptr) ); + return(result); +} + + +/** + \brief STRT Unprivileged (8 bit) + \details Executes a Unprivileged STRT instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__attribute__((always_inline)) __STATIC_INLINE void __STRBT(uint8_t value, volatile uint8_t *ptr) +{ + __ASM volatile ("strbt %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief STRT Unprivileged (16 bit) + \details Executes a Unprivileged STRT instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__attribute__((always_inline)) __STATIC_INLINE void __STRHT(uint16_t value, volatile uint16_t *ptr) +{ + __ASM volatile ("strht %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief STRT Unprivileged (32 bit) + \details Executes a Unprivileged STRT instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__attribute__((always_inline)) __STATIC_INLINE void __STRT(uint32_t value, volatile uint32_t *ptr) +{ + __ASM volatile ("strt %1, %0" : "=Q" (*ptr) : "r" (value) ); +} + +#endif /* ((__ARM_ARCH_7M__ == 1U) || (__ARM_ARCH_7EM__ == 1U) || (__ARM_ARCH_8M__ == 1U)) */ + + +#if (__ARM_ARCH_8M__ == 1U) + +/** + \brief Load-Acquire (8 bit) + \details Executes a LDAB instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__attribute__((always_inline)) __STATIC_INLINE uint8_t __LDAB(volatile uint8_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldab %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint8_t) result); +} + + +/** + \brief Load-Acquire (16 bit) + \details Executes a LDAH instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__attribute__((always_inline)) __STATIC_INLINE uint16_t __LDAH(volatile uint16_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldah %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint16_t) result); +} + + +/** + \brief Load-Acquire (32 bit) + \details Executes a LDA instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__attribute__((always_inline)) __STATIC_INLINE uint32_t __LDA(volatile uint32_t *ptr) +{ + uint32_t result; + + __ASM volatile ("lda %0, %1" : "=r" (result) : "Q" (*ptr) ); + return(result); +} + + +/** + \brief Store-Release (8 bit) + \details Executes a STLB instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__attribute__((always_inline)) __STATIC_INLINE void __STLB(uint8_t value, volatile uint8_t *ptr) +{ + __ASM volatile ("stlb %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief Store-Release (16 bit) + \details Executes a STLH instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__attribute__((always_inline)) __STATIC_INLINE void __STLH(uint16_t value, volatile uint16_t *ptr) +{ + __ASM volatile ("stlh %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief Store-Release (32 bit) + \details Executes a STL instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__attribute__((always_inline)) __STATIC_INLINE void __STL(uint32_t value, volatile uint32_t *ptr) +{ + __ASM volatile ("stl %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief Load-Acquire Exclusive (8 bit) + \details Executes a LDAB exclusive instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +#define __LDAEXB (uint8_t)__builtin_arm_ldaex + + +/** + \brief Load-Acquire Exclusive (16 bit) + \details Executes a LDAH exclusive instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +#define __LDAEXH (uint16_t)__builtin_arm_ldaex + + +/** + \brief Load-Acquire Exclusive (32 bit) + \details Executes a LDA exclusive instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +#define __LDAEX (uint32_t)__builtin_arm_ldaex + + +/** + \brief Store-Release Exclusive (8 bit) + \details Executes a STLB exclusive instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STLEXB (uint32_t)__builtin_arm_stlex + + +/** + \brief Store-Release Exclusive (16 bit) + \details Executes a STLH exclusive instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STLEXH (uint32_t)__builtin_arm_stlex + + +/** + \brief Store-Release Exclusive (32 bit) + \details Executes a STL exclusive instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STLEX (uint32_t)__builtin_arm_stlex + +#endif /* (__ARM_ARCH_8M__ == 1U) */ + +/*@}*/ /* end of group CMSIS_Core_InstructionInterface */ + + +/* ################### Compiler specific Intrinsics ########################### */ +/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics + Access to dedicated SIMD instructions + @{ +*/ + +#if (__ARM_FEATURE_DSP == 1U) /* ToDo: ARMCC_V6: This should be ARCH >= ARMv7-M + SIMD */ + +__attribute__((always_inline)) __STATIC_INLINE uint32_t __SADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__((always_inline)) __STATIC_INLINE uint32_t __QADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__((always_inline)) __STATIC_INLINE uint32_t __SHADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__((always_inline)) __STATIC_INLINE uint32_t __UADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__((always_inline)) __STATIC_INLINE uint32_t __UQADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__((always_inline)) __STATIC_INLINE uint32_t __UHADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + + +__attribute__((always_inline)) __STATIC_INLINE uint32_t __SSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("ssub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__((always_inline)) __STATIC_INLINE uint32_t __QSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__((always_inline)) __STATIC_INLINE uint32_t __SHSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__((always_inline)) __STATIC_INLINE uint32_t __USUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__((always_inline)) __STATIC_INLINE uint32_t __UQSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__((always_inline)) __STATIC_INLINE uint32_t __UHSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + + +__attribute__((always_inline)) __STATIC_INLINE uint32_t __SADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__((always_inline)) __STATIC_INLINE uint32_t __QADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__((always_inline)) __STATIC_INLINE uint32_t __SHADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__((always_inline)) __STATIC_INLINE uint32_t __UADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__((always_inline)) __STATIC_INLINE uint32_t __UQADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__((always_inline)) __STATIC_INLINE uint32_t __UHADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__((always_inline)) __STATIC_INLINE uint32_t __SSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("ssub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__((always_inline)) __STATIC_INLINE uint32_t __QSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__((always_inline)) __STATIC_INLINE uint32_t __SHSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__((always_inline)) __STATIC_INLINE uint32_t __USUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__((always_inline)) __STATIC_INLINE uint32_t __UQSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__((always_inline)) __STATIC_INLINE uint32_t __UHSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__((always_inline)) __STATIC_INLINE uint32_t __SASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__((always_inline)) __STATIC_INLINE uint32_t __QASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__((always_inline)) __STATIC_INLINE uint32_t __SHASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__((always_inline)) __STATIC_INLINE uint32_t __UASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__((always_inline)) __STATIC_INLINE uint32_t __UQASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__((always_inline)) __STATIC_INLINE uint32_t __UHASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__((always_inline)) __STATIC_INLINE uint32_t __SSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("ssax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__((always_inline)) __STATIC_INLINE uint32_t __QSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__((always_inline)) __STATIC_INLINE uint32_t __SHSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__((always_inline)) __STATIC_INLINE uint32_t __USAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__((always_inline)) __STATIC_INLINE uint32_t __UQSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__((always_inline)) __STATIC_INLINE uint32_t __UHSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__((always_inline)) __STATIC_INLINE uint32_t __USAD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usad8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__((always_inline)) __STATIC_INLINE uint32_t __USADA8(uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("usada8 %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +#define __SSAT16(ARG1,ARG2) \ +({ \ + uint32_t __RES, __ARG1 = (ARG1); \ + __ASM ("ssat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ + __RES; \ + }) + +#define __USAT16(ARG1,ARG2) \ +({ \ + uint32_t __RES, __ARG1 = (ARG1); \ + __ASM ("usat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ + __RES; \ + }) + +__attribute__((always_inline)) __STATIC_INLINE uint32_t __UXTB16(uint32_t op1) +{ + uint32_t result; + + __ASM volatile ("uxtb16 %0, %1" : "=r" (result) : "r" (op1)); + return(result); +} + +__attribute__((always_inline)) __STATIC_INLINE uint32_t __UXTAB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__((always_inline)) __STATIC_INLINE uint32_t __SXTB16(uint32_t op1) +{ + uint32_t result; + + __ASM volatile ("sxtb16 %0, %1" : "=r" (result) : "r" (op1)); + return(result); +} + +__attribute__((always_inline)) __STATIC_INLINE uint32_t __SXTAB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__((always_inline)) __STATIC_INLINE uint32_t __SMUAD (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smuad %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__((always_inline)) __STATIC_INLINE uint32_t __SMUADX (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smuadx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__((always_inline)) __STATIC_INLINE uint32_t __SMLAD (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smlad %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__attribute__((always_inline)) __STATIC_INLINE uint32_t __SMLADX (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smladx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__attribute__((always_inline)) __STATIC_INLINE uint64_t __SMLALD (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__attribute__((always_inline)) __STATIC_INLINE uint64_t __SMLALDX (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__attribute__((always_inline)) __STATIC_INLINE uint32_t __SMUSD (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smusd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__((always_inline)) __STATIC_INLINE uint32_t __SMUSDX (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smusdx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__((always_inline)) __STATIC_INLINE uint32_t __SMLSD (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smlsd %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__attribute__((always_inline)) __STATIC_INLINE uint32_t __SMLSDX (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smlsdx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__attribute__((always_inline)) __STATIC_INLINE uint64_t __SMLSLD (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__attribute__((always_inline)) __STATIC_INLINE uint64_t __SMLSLDX (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__attribute__((always_inline)) __STATIC_INLINE uint32_t __SEL (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sel %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__((always_inline)) __STATIC_INLINE int32_t __QADD( int32_t op1, int32_t op2) +{ + int32_t result; + + __ASM volatile ("qadd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__((always_inline)) __STATIC_INLINE int32_t __QSUB( int32_t op1, int32_t op2) +{ + int32_t result; + + __ASM volatile ("qsub %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +#define __PKHBT(ARG1,ARG2,ARG3) \ +({ \ + uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \ + __ASM ("pkhbt %0, %1, %2, lsl %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \ + __RES; \ + }) + +#define __PKHTB(ARG1,ARG2,ARG3) \ +({ \ + uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \ + if (ARG3 == 0) \ + __ASM ("pkhtb %0, %1, %2" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2) ); \ + else \ + __ASM ("pkhtb %0, %1, %2, asr %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \ + __RES; \ + }) + +__attribute__((always_inline)) __STATIC_INLINE uint32_t __SMMLA (int32_t op1, int32_t op2, int32_t op3) +{ + int32_t result; + + __ASM volatile ("smmla %0, %1, %2, %3" : "=r" (result): "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +#endif /* (__ARM_FEATURE_DSP == 1U) */ +/*@} end of group CMSIS_SIMD_intrinsics */ + + +#endif /* __CMSIS_ARMCC_V6_H */ diff --git a/src/boards/mcu/stm32/cmsis/cmsis_gcc.h b/src/boards/mcu/stm32/cmsis/cmsis_gcc.h new file mode 100755 index 0000000..d868f2e --- /dev/null +++ b/src/boards/mcu/stm32/cmsis/cmsis_gcc.h @@ -0,0 +1,1373 @@ +/**************************************************************************//** + * @file cmsis_gcc.h + * @brief CMSIS Cortex-M Core Function/Instruction Header File + * @version V4.30 + * @date 20. October 2015 + ******************************************************************************/ +/* Copyright (c) 2009 - 2015 ARM LIMITED + + All rights reserved. + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are met: + - Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + - Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + - Neither the name of ARM nor the names of its contributors may be used + to endorse or promote products derived from this software without + specific prior written permission. + * + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + POSSIBILITY OF SUCH DAMAGE. + ---------------------------------------------------------------------------*/ + + +#ifndef __CMSIS_GCC_H +#define __CMSIS_GCC_H + +/* ignore some GCC warnings */ +#if defined ( __GNUC__ ) +#pragma GCC diagnostic push +#pragma GCC diagnostic ignored "-Wsign-conversion" +#pragma GCC diagnostic ignored "-Wconversion" +#pragma GCC diagnostic ignored "-Wunused-parameter" +#endif + + +/* ########################### Core Function Access ########################### */ +/** \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions + @{ + */ + +/** + \brief Enable IRQ Interrupts + \details Enables IRQ interrupts by clearing the I-bit in the CPSR. + Can only be executed in Privileged modes. + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_irq(void) +{ + __ASM volatile ("cpsie i" : : : "memory"); +} + + +/** + \brief Disable IRQ Interrupts + \details Disables IRQ interrupts by setting the I-bit in the CPSR. + Can only be executed in Privileged modes. + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_irq(void) +{ + __ASM volatile ("cpsid i" : : : "memory"); +} + + +/** + \brief Get Control Register + \details Returns the content of the Control Register. + \return Control Register value + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_CONTROL(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, control" : "=r" (result) ); + return(result); +} + + +/** + \brief Set Control Register + \details Writes the given value to the Control Register. + \param [in] control Control Register value to set + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_CONTROL(uint32_t control) +{ + __ASM volatile ("MSR control, %0" : : "r" (control) : "memory"); +} + + +/** + \brief Get IPSR Register + \details Returns the content of the IPSR Register. + \return IPSR Register value + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_IPSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, ipsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get APSR Register + \details Returns the content of the APSR Register. + \return APSR Register value + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_APSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, apsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get xPSR Register + \details Returns the content of the xPSR Register. + + \return xPSR Register value + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_xPSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, xpsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get Process Stack Pointer + \details Returns the current value of the Process Stack Pointer (PSP). + \return PSP Register value + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_PSP(void) +{ + register uint32_t result; + + __ASM volatile ("MRS %0, psp\n" : "=r" (result) ); + return(result); +} + + +/** + \brief Set Process Stack Pointer + \details Assigns the given value to the Process Stack Pointer (PSP). + \param [in] topOfProcStack Process Stack Pointer value to set + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_PSP(uint32_t topOfProcStack) +{ + __ASM volatile ("MSR psp, %0\n" : : "r" (topOfProcStack) : "sp"); +} + + +/** + \brief Get Main Stack Pointer + \details Returns the current value of the Main Stack Pointer (MSP). + \return MSP Register value + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_MSP(void) +{ + register uint32_t result; + + __ASM volatile ("MRS %0, msp\n" : "=r" (result) ); + return(result); +} + + +/** + \brief Set Main Stack Pointer + \details Assigns the given value to the Main Stack Pointer (MSP). + + \param [in] topOfMainStack Main Stack Pointer value to set + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_MSP(uint32_t topOfMainStack) +{ + __ASM volatile ("MSR msp, %0\n" : : "r" (topOfMainStack) : "sp"); +} + + +/** + \brief Get Priority Mask + \details Returns the current state of the priority mask bit from the Priority Mask Register. + \return Priority Mask value + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_PRIMASK(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, primask" : "=r" (result) ); + return(result); +} + + +/** + \brief Set Priority Mask + \details Assigns the given value to the Priority Mask Register. + \param [in] priMask Priority Mask + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_PRIMASK(uint32_t priMask) +{ + __ASM volatile ("MSR primask, %0" : : "r" (priMask) : "memory"); +} + + +#if (__CORTEX_M >= 0x03U) + +/** + \brief Enable FIQ + \details Enables FIQ interrupts by clearing the F-bit in the CPSR. + Can only be executed in Privileged modes. + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_fault_irq(void) +{ + __ASM volatile ("cpsie f" : : : "memory"); +} + + +/** + \brief Disable FIQ + \details Disables FIQ interrupts by setting the F-bit in the CPSR. + Can only be executed in Privileged modes. + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_fault_irq(void) +{ + __ASM volatile ("cpsid f" : : : "memory"); +} + + +/** + \brief Get Base Priority + \details Returns the current value of the Base Priority register. + \return Base Priority register value + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_BASEPRI(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, basepri" : "=r" (result) ); + return(result); +} + + +/** + \brief Set Base Priority + \details Assigns the given value to the Base Priority register. + \param [in] basePri Base Priority value to set + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_BASEPRI(uint32_t value) +{ + __ASM volatile ("MSR basepri, %0" : : "r" (value) : "memory"); +} + + +/** + \brief Set Base Priority with condition + \details Assigns the given value to the Base Priority register only if BASEPRI masking is disabled, + or the new value increases the BASEPRI priority level. + \param [in] basePri Base Priority value to set + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_BASEPRI_MAX(uint32_t value) +{ + __ASM volatile ("MSR basepri_max, %0" : : "r" (value) : "memory"); +} + + +/** + \brief Get Fault Mask + \details Returns the current value of the Fault Mask register. + \return Fault Mask register value + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_FAULTMASK(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, faultmask" : "=r" (result) ); + return(result); +} + + +/** + \brief Set Fault Mask + \details Assigns the given value to the Fault Mask register. + \param [in] faultMask Fault Mask value to set + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask) +{ + __ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) : "memory"); +} + +#endif /* (__CORTEX_M >= 0x03U) */ + + +#if (__CORTEX_M == 0x04U) || (__CORTEX_M == 0x07U) + +/** + \brief Get FPSCR + \details Returns the current value of the Floating Point Status/Control register. + \return Floating Point Status/Control register value + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_FPSCR(void) +{ +#if (__FPU_PRESENT == 1U) && (__FPU_USED == 1U) + uint32_t result; + + /* Empty asm statement works as a scheduling barrier */ + __ASM volatile (""); + __ASM volatile ("VMRS %0, fpscr" : "=r" (result) ); + __ASM volatile (""); + return(result); +#else + return(0); +#endif +} + + +/** + \brief Set FPSCR + \details Assigns the given value to the Floating Point Status/Control register. + \param [in] fpscr Floating Point Status/Control value to set + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_FPSCR(uint32_t fpscr) +{ +#if (__FPU_PRESENT == 1U) && (__FPU_USED == 1U) + /* Empty asm statement works as a scheduling barrier */ + __ASM volatile (""); + __ASM volatile ("VMSR fpscr, %0" : : "r" (fpscr) : "vfpcc"); + __ASM volatile (""); +#endif +} + +#endif /* (__CORTEX_M == 0x04U) || (__CORTEX_M == 0x07U) */ + + + +/*@} end of CMSIS_Core_RegAccFunctions */ + + +/* ########################## Core Instruction Access ######################### */ +/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface + Access to dedicated instructions + @{ +*/ + +/* Define macros for porting to both thumb1 and thumb2. + * For thumb1, use low register (r0-r7), specified by constraint "l" + * Otherwise, use general registers, specified by constraint "r" */ +#if defined (__thumb__) && !defined (__thumb2__) +#define __CMSIS_GCC_OUT_REG(r) "=l" (r) +#define __CMSIS_GCC_USE_REG(r) "l" (r) +#else +#define __CMSIS_GCC_OUT_REG(r) "=r" (r) +#define __CMSIS_GCC_USE_REG(r) "r" (r) +#endif + +/** + \brief No Operation + \details No Operation does nothing. This instruction can be used for code alignment purposes. + */ +__attribute__((always_inline)) __STATIC_INLINE void __NOP(void) +{ + __ASM volatile ("nop"); +} + + +/** + \brief Wait For Interrupt + \details Wait For Interrupt is a hint instruction that suspends execution until one of a number of events occurs. + */ +__attribute__((always_inline)) __STATIC_INLINE void __WFI(void) +{ + __ASM volatile ("wfi"); +} + + +/** + \brief Wait For Event + \details Wait For Event is a hint instruction that permits the processor to enter + a low-power state until one of a number of events occurs. + */ +__attribute__((always_inline)) __STATIC_INLINE void __WFE(void) +{ + __ASM volatile ("wfe"); +} + + +/** + \brief Send Event + \details Send Event is a hint instruction. It causes an event to be signaled to the CPU. + */ +__attribute__((always_inline)) __STATIC_INLINE void __SEV(void) +{ + __ASM volatile ("sev"); +} + + +/** + \brief Instruction Synchronization Barrier + \details Instruction Synchronization Barrier flushes the pipeline in the processor, + so that all instructions following the ISB are fetched from cache or memory, + after the instruction has been completed. + */ +__attribute__((always_inline)) __STATIC_INLINE void __ISB(void) +{ + __ASM volatile ("isb 0xF":::"memory"); +} + + +/** + \brief Data Synchronization Barrier + \details Acts as a special kind of Data Memory Barrier. + It completes when all explicit memory accesses before this instruction complete. + */ +__attribute__((always_inline)) __STATIC_INLINE void __DSB(void) +{ + __ASM volatile ("dsb 0xF":::"memory"); +} + + +/** + \brief Data Memory Barrier + \details Ensures the apparent order of the explicit memory operations before + and after the instruction, without ensuring their completion. + */ +__attribute__((always_inline)) __STATIC_INLINE void __DMB(void) +{ + __ASM volatile ("dmb 0xF":::"memory"); +} + + +/** + \brief Reverse byte order (32 bit) + \details Reverses the byte order in integer value. + \param [in] value Value to reverse + \return Reversed value + */ +__attribute__((always_inline)) __STATIC_INLINE uint32_t __REV(uint32_t value) +{ +#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 5) + return __builtin_bswap32(value); +#else + uint32_t result; + + __ASM volatile ("rev %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); + return(result); +#endif +} + + +/** + \brief Reverse byte order (16 bit) + \details Reverses the byte order in two unsigned short values. + \param [in] value Value to reverse + \return Reversed value + */ +__attribute__((always_inline)) __STATIC_INLINE uint32_t __REV16(uint32_t value) +{ + uint32_t result; + + __ASM volatile ("rev16 %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); + return(result); +} + + +/** + \brief Reverse byte order in signed short value + \details Reverses the byte order in a signed short value with sign extension to integer. + \param [in] value Value to reverse + \return Reversed value + */ +__attribute__((always_inline)) __STATIC_INLINE int32_t __REVSH(int32_t value) +{ +#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) + return (short)__builtin_bswap16(value); +#else + int32_t result; + + __ASM volatile ("revsh %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); + return(result); +#endif +} + + +/** + \brief Rotate Right in unsigned value (32 bit) + \details Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits. + \param [in] value Value to rotate + \param [in] value Number of Bits to rotate + \return Rotated value + */ +__attribute__((always_inline)) __STATIC_INLINE uint32_t __ROR(uint32_t op1, uint32_t op2) +{ + return (op1 >> op2) | (op1 << (32U - op2)); +} + + +/** + \brief Breakpoint + \details Causes the processor to enter Debug state. + Debug tools can use this to investigate system state when the instruction at a particular address is reached. + \param [in] value is ignored by the processor. + If required, a debugger can use it to store additional information about the breakpoint. + */ +#define __BKPT(value) __ASM volatile ("bkpt "#value) + + +/** + \brief Reverse bit order of value + \details Reverses the bit order of the given value. + \param [in] value Value to reverse + \return Reversed value + */ +__attribute__((always_inline)) __STATIC_INLINE uint32_t __RBIT(uint32_t value) +{ + uint32_t result; + +#if (__CORTEX_M >= 0x03U) || (__CORTEX_SC >= 300U) + __ASM volatile ("rbit %0, %1" : "=r" (result) : "r" (value) ); +#else + int32_t s = 4 /*sizeof(v)*/ * 8 - 1; /* extra shift needed at end */ + + result = value; /* r will be reversed bits of v; first get LSB of v */ + for (value >>= 1U; value; value >>= 1U) + { + result <<= 1U; + result |= value & 1U; + s--; + } + result <<= s; /* shift when v's highest bits are zero */ +#endif + return(result); +} + + +/** + \brief Count leading zeros + \details Counts the number of leading zeros of a data value. + \param [in] value Value to count the leading zeros + \return number of leading zeros in value + */ +#define __CLZ __builtin_clz + + +#if (__CORTEX_M >= 0x03U) || (__CORTEX_SC >= 300U) + +/** + \brief LDR Exclusive (8 bit) + \details Executes a exclusive LDR instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__attribute__((always_inline)) __STATIC_INLINE uint8_t __LDREXB(volatile uint8_t *addr) +{ + uint32_t result; + +#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) + __ASM volatile ("ldrexb %0, %1" : "=r" (result) : "Q" (*addr) ); +#else + /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not + accepted by assembler. So has to use following less efficient pattern. + */ + __ASM volatile ("ldrexb %0, [%1]" : "=r" (result) : "r" (addr) : "memory" ); +#endif + return ((uint8_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDR Exclusive (16 bit) + \details Executes a exclusive LDR instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__attribute__((always_inline)) __STATIC_INLINE uint16_t __LDREXH(volatile uint16_t *addr) +{ + uint32_t result; + +#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) + __ASM volatile ("ldrexh %0, %1" : "=r" (result) : "Q" (*addr) ); +#else + /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not + accepted by assembler. So has to use following less efficient pattern. + */ + __ASM volatile ("ldrexh %0, [%1]" : "=r" (result) : "r" (addr) : "memory" ); +#endif + return ((uint16_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDR Exclusive (32 bit) + \details Executes a exclusive LDR instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__attribute__((always_inline)) __STATIC_INLINE uint32_t __LDREXW(volatile uint32_t *addr) +{ + uint32_t result; + + __ASM volatile ("ldrex %0, %1" : "=r" (result) : "Q" (*addr) ); + return(result); +} + + +/** + \brief STR Exclusive (8 bit) + \details Executes a exclusive STR instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +__attribute__((always_inline)) __STATIC_INLINE uint32_t __STREXB(uint8_t value, volatile uint8_t *addr) +{ + uint32_t result; + + __ASM volatile ("strexb %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" ((uint32_t)value) ); + return(result); +} + + +/** + \brief STR Exclusive (16 bit) + \details Executes a exclusive STR instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +__attribute__((always_inline)) __STATIC_INLINE uint32_t __STREXH(uint16_t value, volatile uint16_t *addr) +{ + uint32_t result; + + __ASM volatile ("strexh %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" ((uint32_t)value) ); + return(result); +} + + +/** + \brief STR Exclusive (32 bit) + \details Executes a exclusive STR instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +__attribute__((always_inline)) __STATIC_INLINE uint32_t __STREXW(uint32_t value, volatile uint32_t *addr) +{ + uint32_t result; + + __ASM volatile ("strex %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) ); + return(result); +} + + +/** + \brief Remove the exclusive lock + \details Removes the exclusive lock which is created by LDREX. + */ +__attribute__((always_inline)) __STATIC_INLINE void __CLREX(void) +{ + __ASM volatile ("clrex" ::: "memory"); +} + + +/** + \brief Signed Saturate + \details Saturates a signed value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (1..32) + \return Saturated value + */ +#define __SSAT(ARG1,ARG2) \ +({ \ + uint32_t __RES, __ARG1 = (ARG1); \ + __ASM ("ssat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ + __RES; \ + }) + + +/** + \brief Unsigned Saturate + \details Saturates an unsigned value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (0..31) + \return Saturated value + */ +#define __USAT(ARG1,ARG2) \ +({ \ + uint32_t __RES, __ARG1 = (ARG1); \ + __ASM ("usat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ + __RES; \ + }) + + +/** + \brief Rotate Right with Extend (32 bit) + \details Moves each bit of a bitstring right by one bit. + The carry input is shifted in at the left end of the bitstring. + \param [in] value Value to rotate + \return Rotated value + */ +__attribute__((always_inline)) __STATIC_INLINE uint32_t __RRX(uint32_t value) +{ + uint32_t result; + + __ASM volatile ("rrx %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); + return(result); +} + + +/** + \brief LDRT Unprivileged (8 bit) + \details Executes a Unprivileged LDRT instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__attribute__((always_inline)) __STATIC_INLINE uint8_t __LDRBT(volatile uint8_t *addr) +{ + uint32_t result; + +#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) + __ASM volatile ("ldrbt %0, %1" : "=r" (result) : "Q" (*addr) ); +#else + /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not + accepted by assembler. So has to use following less efficient pattern. + */ + __ASM volatile ("ldrbt %0, [%1]" : "=r" (result) : "r" (addr) : "memory" ); +#endif + return ((uint8_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDRT Unprivileged (16 bit) + \details Executes a Unprivileged LDRT instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__attribute__((always_inline)) __STATIC_INLINE uint16_t __LDRHT(volatile uint16_t *addr) +{ + uint32_t result; + +#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) + __ASM volatile ("ldrht %0, %1" : "=r" (result) : "Q" (*addr) ); +#else + /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not + accepted by assembler. So has to use following less efficient pattern. + */ + __ASM volatile ("ldrht %0, [%1]" : "=r" (result) : "r" (addr) : "memory" ); +#endif + return ((uint16_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDRT Unprivileged (32 bit) + \details Executes a Unprivileged LDRT instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__attribute__((always_inline)) __STATIC_INLINE uint32_t __LDRT(volatile uint32_t *addr) +{ + uint32_t result; + + __ASM volatile ("ldrt %0, %1" : "=r" (result) : "Q" (*addr) ); + return(result); +} + + +/** + \brief STRT Unprivileged (8 bit) + \details Executes a Unprivileged STRT instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__attribute__((always_inline)) __STATIC_INLINE void __STRBT(uint8_t value, volatile uint8_t *addr) +{ + __ASM volatile ("strbt %1, %0" : "=Q" (*addr) : "r" ((uint32_t)value) ); +} + + +/** + \brief STRT Unprivileged (16 bit) + \details Executes a Unprivileged STRT instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__attribute__((always_inline)) __STATIC_INLINE void __STRHT(uint16_t value, volatile uint16_t *addr) +{ + __ASM volatile ("strht %1, %0" : "=Q" (*addr) : "r" ((uint32_t)value) ); +} + + +/** + \brief STRT Unprivileged (32 bit) + \details Executes a Unprivileged STRT instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__attribute__((always_inline)) __STATIC_INLINE void __STRT(uint32_t value, volatile uint32_t *addr) +{ + __ASM volatile ("strt %1, %0" : "=Q" (*addr) : "r" (value) ); +} + +#endif /* (__CORTEX_M >= 0x03U) || (__CORTEX_SC >= 300U) */ + +/*@}*/ /* end of group CMSIS_Core_InstructionInterface */ + + +/* ################### Compiler specific Intrinsics ########################### */ +/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics + Access to dedicated SIMD instructions + @{ +*/ + +#if (__CORTEX_M >= 0x04U) /* only for Cortex-M4 and above */ + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("ssub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("ssub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("ssax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USAD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usad8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USADA8(uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("usada8 %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +#define __SSAT16(ARG1,ARG2) \ +({ \ + int32_t __RES, __ARG1 = (ARG1); \ + __ASM ("ssat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ + __RES; \ + }) + +#define __USAT16(ARG1,ARG2) \ +({ \ + uint32_t __RES, __ARG1 = (ARG1); \ + __ASM ("usat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ + __RES; \ + }) + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UXTB16(uint32_t op1) +{ + uint32_t result; + + __ASM volatile ("uxtb16 %0, %1" : "=r" (result) : "r" (op1)); + return(result); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UXTAB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SXTB16(uint32_t op1) +{ + uint32_t result; + + __ASM volatile ("sxtb16 %0, %1" : "=r" (result) : "r" (op1)); + return(result); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SXTAB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUAD (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smuad %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUADX (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smuadx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLAD (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smlad %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLADX (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smladx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint64_t __SMLALD (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint64_t __SMLALDX (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUSD (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smusd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUSDX (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smusdx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLSD (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smlsd %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLSDX (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smlsdx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint64_t __SMLSLD (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint64_t __SMLSLDX (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SEL (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sel %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE int32_t __QADD( int32_t op1, int32_t op2) +{ + int32_t result; + + __ASM volatile ("qadd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE int32_t __QSUB( int32_t op1, int32_t op2) +{ + int32_t result; + + __ASM volatile ("qsub %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +#define __PKHBT(ARG1,ARG2,ARG3) \ +({ \ + uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \ + __ASM ("pkhbt %0, %1, %2, lsl %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \ + __RES; \ + }) + +#define __PKHTB(ARG1,ARG2,ARG3) \ +({ \ + uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \ + if (ARG3 == 0) \ + __ASM ("pkhtb %0, %1, %2" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2) ); \ + else \ + __ASM ("pkhtb %0, %1, %2, asr %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \ + __RES; \ + }) + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMMLA (int32_t op1, int32_t op2, int32_t op3) +{ + int32_t result; + + __ASM volatile ("smmla %0, %1, %2, %3" : "=r" (result): "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +#endif /* (__CORTEX_M >= 0x04) */ +/*@} end of group CMSIS_SIMD_intrinsics */ + + +#if defined ( __GNUC__ ) +#pragma GCC diagnostic pop +#endif + +#endif /* __CMSIS_GCC_H */ diff --git a/src/boards/mcu/stm32/cmsis/core_cm0.h b/src/boards/mcu/stm32/cmsis/core_cm0.h new file mode 100755 index 0000000..fdee521 --- /dev/null +++ b/src/boards/mcu/stm32/cmsis/core_cm0.h @@ -0,0 +1,798 @@ +/**************************************************************************//** + * @file core_cm0.h + * @brief CMSIS Cortex-M0 Core Peripheral Access Layer Header File + * @version V4.30 + * @date 20. October 2015 + ******************************************************************************/ +/* Copyright (c) 2009 - 2015 ARM LIMITED + + All rights reserved. + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are met: + - Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + - Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + - Neither the name of ARM nor the names of its contributors may be used + to endorse or promote products derived from this software without + specific prior written permission. + * + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + POSSIBILITY OF SUCH DAMAGE. + ---------------------------------------------------------------------------*/ + + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_CM0_H_GENERIC +#define __CORE_CM0_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_M0 + @{ + */ + +/* CMSIS CM0 definitions */ +#define __CM0_CMSIS_VERSION_MAIN (0x04U) /*!< [31:16] CMSIS HAL main version */ +#define __CM0_CMSIS_VERSION_SUB (0x1EU) /*!< [15:0] CMSIS HAL sub version */ +#define __CM0_CMSIS_VERSION ((__CM0_CMSIS_VERSION_MAIN << 16U) | \ + __CM0_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */ + +#define __CORTEX_M (0x00U) /*!< Cortex-M Core */ + + +#if defined ( __CC_ARM ) + #define __ASM __asm /*!< asm keyword for ARM Compiler */ + #define __INLINE __inline /*!< inline keyword for ARM Compiler */ + #define __STATIC_INLINE static __inline + +#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #define __ASM __asm /*!< asm keyword for ARM Compiler */ + #define __INLINE __inline /*!< inline keyword for ARM Compiler */ + #define __STATIC_INLINE static __inline + +#elif defined ( __GNUC__ ) + #define __ASM __asm /*!< asm keyword for GNU Compiler */ + #define __INLINE inline /*!< inline keyword for GNU Compiler */ + #define __STATIC_INLINE static inline + +#elif defined ( __ICCARM__ ) + #define __ASM __asm /*!< asm keyword for IAR Compiler */ + #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */ + #define __STATIC_INLINE static inline + +#elif defined ( __TMS470__ ) + #define __ASM __asm /*!< asm keyword for TI CCS Compiler */ + #define __STATIC_INLINE static inline + +#elif defined ( __TASKING__ ) + #define __ASM __asm /*!< asm keyword for TASKING Compiler */ + #define __INLINE inline /*!< inline keyword for TASKING Compiler */ + #define __STATIC_INLINE static inline + +#elif defined ( __CSMC__ ) + #define __packed + #define __ASM _asm /*!< asm keyword for COSMIC Compiler */ + #define __INLINE inline /*!< inline keyword for COSMIC Compiler. Use -pc99 on compile line */ + #define __STATIC_INLINE static inline + +#else + #error Unknown compiler +#endif + +/** __FPU_USED indicates whether an FPU is used or not. + This core does not support an FPU at all +*/ +#define __FPU_USED 0U + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_PCS_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TMS470__ ) + #if defined __TI_VFP_SUPPORT__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#endif + +#include "core_cmInstr.h" /* Core Instruction Access */ +#include "core_cmFunc.h" /* Core Function Access */ + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM0_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM0_H_DEPENDANT +#define __CORE_CM0_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM0_REV + #define __CM0_REV 0x0000U + #warning "__CM0_REV not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 2U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex_M0 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t _reserved0:1; /*!< bit: 0 Reserved */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[1U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[31U]; + __IOM uint32_t ICER[1U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[31U]; + __IOM uint32_t ISPR[1U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[31U]; + __IOM uint32_t ICPR[1U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[31U]; + uint32_t RESERVED4[64U]; + __IOM uint32_t IP[8U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */ +} NVIC_Type; + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + uint32_t RESERVED0; + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + uint32_t RESERVED1; + __IOM uint32_t SHP[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Cortex-M0 Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor. + Therefore they are not covered by the Cortex-M0 header file. + @{ + */ +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) ((value << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) ((value & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Cortex-M0 Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +/* Interrupt Priorities are WORD accessible only under ARMv6M */ +/* The following MACROS handle generation of the register offset and byte masks */ +#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL) +#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) ) +#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) ) + + +/** + \brief Enable External Interrupt + \details Enables a device-specific interrupt in the NVIC interrupt controller. + \param [in] IRQn External interrupt number. Value cannot be negative. + */ +__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn) +{ + NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL)); +} + + +/** + \brief Disable External Interrupt + \details Disables a device-specific interrupt in the NVIC interrupt controller. + \param [in] IRQn External interrupt number. Value cannot be negative. + */ +__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn) +{ + NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL)); +} + + +/** + \brief Get Pending Interrupt + \details Reads the pending register in the NVIC and returns the pending bit for the specified interrupt. + \param [in] IRQn Interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + */ +__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of an external interrupt. + \param [in] IRQn Interrupt number. Value cannot be negative. + */ +__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL)); +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of an external interrupt. + \param [in] IRQn External interrupt number. Value cannot be negative. + */ +__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL)); +} + + +/** + \brief Set Interrupt Priority + \details Sets the priority of an interrupt. + \note The priority cannot be set for every core interrupt. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + */ +__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) < 0) + { + SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } + else + { + NVIC->IP[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of an interrupt. + The interrupt number can be positive to specify an external (device specific) interrupt, + or negative to specify an internal (core) interrupt. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) < 0) + { + return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__STATIC_INLINE void NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + SCB_AIRCR_SYSRESETREQ_Msk); + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +/*@} end of CMSIS_Core_NVICFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM0_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/src/boards/mcu/stm32/cmsis/core_cm0plus.h b/src/boards/mcu/stm32/cmsis/core_cm0plus.h new file mode 100755 index 0000000..7614450 --- /dev/null +++ b/src/boards/mcu/stm32/cmsis/core_cm0plus.h @@ -0,0 +1,914 @@ +/**************************************************************************//** + * @file core_cm0plus.h + * @brief CMSIS Cortex-M0+ Core Peripheral Access Layer Header File + * @version V4.30 + * @date 20. October 2015 + ******************************************************************************/ +/* Copyright (c) 2009 - 2015 ARM LIMITED + + All rights reserved. + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are met: + - Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + - Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + - Neither the name of ARM nor the names of its contributors may be used + to endorse or promote products derived from this software without + specific prior written permission. + * + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + POSSIBILITY OF SUCH DAMAGE. + ---------------------------------------------------------------------------*/ + + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_CM0PLUS_H_GENERIC +#define __CORE_CM0PLUS_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex-M0+ + @{ + */ + +/* CMSIS CM0+ definitions */ +#define __CM0PLUS_CMSIS_VERSION_MAIN (0x04U) /*!< [31:16] CMSIS HAL main version */ +#define __CM0PLUS_CMSIS_VERSION_SUB (0x1EU) /*!< [15:0] CMSIS HAL sub version */ +#define __CM0PLUS_CMSIS_VERSION ((__CM0PLUS_CMSIS_VERSION_MAIN << 16U) | \ + __CM0PLUS_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */ + +#define __CORTEX_M (0x00U) /*!< Cortex-M Core */ + + +#if defined ( __CC_ARM ) + #define __ASM __asm /*!< asm keyword for ARM Compiler */ + #define __INLINE __inline /*!< inline keyword for ARM Compiler */ + #define __STATIC_INLINE static __inline + +#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #define __ASM __asm /*!< asm keyword for ARM Compiler */ + #define __INLINE __inline /*!< inline keyword for ARM Compiler */ + #define __STATIC_INLINE static __inline + +#elif defined ( __GNUC__ ) + #define __ASM __asm /*!< asm keyword for GNU Compiler */ + #define __INLINE inline /*!< inline keyword for GNU Compiler */ + #define __STATIC_INLINE static inline + +#elif defined ( __ICCARM__ ) + #define __ASM __asm /*!< asm keyword for IAR Compiler */ + #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */ + #define __STATIC_INLINE static inline + +#elif defined ( __TMS470__ ) + #define __ASM __asm /*!< asm keyword for TI CCS Compiler */ + #define __STATIC_INLINE static inline + +#elif defined ( __TASKING__ ) + #define __ASM __asm /*!< asm keyword for TASKING Compiler */ + #define __INLINE inline /*!< inline keyword for TASKING Compiler */ + #define __STATIC_INLINE static inline + +#elif defined ( __CSMC__ ) + #define __packed + #define __ASM _asm /*!< asm keyword for COSMIC Compiler */ + #define __INLINE inline /*!< inline keyword for COSMIC Compiler. Use -pc99 on compile line */ + #define __STATIC_INLINE static inline + +#else + #error Unknown compiler +#endif + +/** __FPU_USED indicates whether an FPU is used or not. + This core does not support an FPU at all +*/ +#define __FPU_USED 0U + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_PCS_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TMS470__ ) + #if defined __TI_VFP_SUPPORT__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#endif + +#include "core_cmInstr.h" /* Core Instruction Access */ +#include "core_cmFunc.h" /* Core Function Access */ + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM0PLUS_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM0PLUS_H_DEPENDANT +#define __CORE_CM0PLUS_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM0PLUS_REV + #define __CM0PLUS_REV 0x0000U + #warning "__CM0PLUS_REV not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __VTOR_PRESENT + #define __VTOR_PRESENT 0U + #warning "__VTOR_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 2U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex-M0+ */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core MPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[1U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[31U]; + __IOM uint32_t ICER[1U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[31U]; + __IOM uint32_t ISPR[1U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[31U]; + __IOM uint32_t ICPR[1U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[31U]; + uint32_t RESERVED4[64U]; + __IOM uint32_t IP[8U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */ +} NVIC_Type; + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ +#if (__VTOR_PRESENT == 1U) + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ +#else + uint32_t RESERVED0; +#endif + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + uint32_t RESERVED1; + __IOM uint32_t SHP[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +#if (__VTOR_PRESENT == 1U) +/* SCB Interrupt Control State Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 8U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0xFFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ +#endif + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + +#if (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ +} MPU_Type; + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_ADDR_Pos 8U /*!< MPU RBAR: ADDR Position */ +#define MPU_RBAR_ADDR_Msk (0xFFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ + +#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */ +#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ + +#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */ +#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */ + +/* MPU Region Attribute and Size Register Definitions */ +#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */ +#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ + +#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */ +#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ + +#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */ +#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ + +#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */ +#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ + +#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */ +#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ + +#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */ +#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ + +#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */ +#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ + +#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */ +#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ + +#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */ +#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ + +#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */ +#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Cortex-M0+ Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor. + Therefore they are not covered by the Cortex-M0+ header file. + @{ + */ +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) ((value << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) ((value & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Cortex-M0+ Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + +#if (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ +#endif + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +/* Interrupt Priorities are WORD accessible only under ARMv6M */ +/* The following MACROS handle generation of the register offset and byte masks */ +#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL) +#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) ) +#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) ) + + +/** + \brief Enable External Interrupt + \details Enables a device-specific interrupt in the NVIC interrupt controller. + \param [in] IRQn External interrupt number. Value cannot be negative. + */ +__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn) +{ + NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL)); +} + + +/** + \brief Disable External Interrupt + \details Disables a device-specific interrupt in the NVIC interrupt controller. + \param [in] IRQn External interrupt number. Value cannot be negative. + */ +__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn) +{ + NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL)); +} + + +/** + \brief Get Pending Interrupt + \details Reads the pending register in the NVIC and returns the pending bit for the specified interrupt. + \param [in] IRQn Interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + */ +__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of an external interrupt. + \param [in] IRQn Interrupt number. Value cannot be negative. + */ +__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL)); +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of an external interrupt. + \param [in] IRQn External interrupt number. Value cannot be negative. + */ +__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL)); +} + + +/** + \brief Set Interrupt Priority + \details Sets the priority of an interrupt. + \note The priority cannot be set for every core interrupt. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + */ +__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) < 0) + { + SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } + else + { + NVIC->IP[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of an interrupt. + The interrupt number can be positive to specify an external (device specific) interrupt, + or negative to specify an internal (core) interrupt. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) < 0) + { + return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__STATIC_INLINE void NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + SCB_AIRCR_SYSRESETREQ_Msk); + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +/*@} end of CMSIS_Core_NVICFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM0PLUS_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/src/boards/mcu/stm32/cmsis/core_cm3.h b/src/boards/mcu/stm32/cmsis/core_cm3.h new file mode 100755 index 0000000..34ed84c --- /dev/null +++ b/src/boards/mcu/stm32/cmsis/core_cm3.h @@ -0,0 +1,1763 @@ +/**************************************************************************//** + * @file core_cm3.h + * @brief CMSIS Cortex-M3 Core Peripheral Access Layer Header File + * @version V4.30 + * @date 20. October 2015 + ******************************************************************************/ +/* Copyright (c) 2009 - 2015 ARM LIMITED + + All rights reserved. + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are met: + - Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + - Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + - Neither the name of ARM nor the names of its contributors may be used + to endorse or promote products derived from this software without + specific prior written permission. + * + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + POSSIBILITY OF SUCH DAMAGE. + ---------------------------------------------------------------------------*/ + + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_CM3_H_GENERIC +#define __CORE_CM3_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_M3 + @{ + */ + +/* CMSIS CM3 definitions */ +#define __CM3_CMSIS_VERSION_MAIN (0x04U) /*!< [31:16] CMSIS HAL main version */ +#define __CM3_CMSIS_VERSION_SUB (0x1EU) /*!< [15:0] CMSIS HAL sub version */ +#define __CM3_CMSIS_VERSION ((__CM3_CMSIS_VERSION_MAIN << 16U) | \ + __CM3_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */ + +#define __CORTEX_M (0x03U) /*!< Cortex-M Core */ + + +#if defined ( __CC_ARM ) + #define __ASM __asm /*!< asm keyword for ARM Compiler */ + #define __INLINE __inline /*!< inline keyword for ARM Compiler */ + #define __STATIC_INLINE static __inline + +#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #define __ASM __asm /*!< asm keyword for ARM Compiler */ + #define __INLINE __inline /*!< inline keyword for ARM Compiler */ + #define __STATIC_INLINE static __inline + +#elif defined ( __GNUC__ ) + #define __ASM __asm /*!< asm keyword for GNU Compiler */ + #define __INLINE inline /*!< inline keyword for GNU Compiler */ + #define __STATIC_INLINE static inline + +#elif defined ( __ICCARM__ ) + #define __ASM __asm /*!< asm keyword for IAR Compiler */ + #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */ + #define __STATIC_INLINE static inline + +#elif defined ( __TMS470__ ) + #define __ASM __asm /*!< asm keyword for TI CCS Compiler */ + #define __STATIC_INLINE static inline + +#elif defined ( __TASKING__ ) + #define __ASM __asm /*!< asm keyword for TASKING Compiler */ + #define __INLINE inline /*!< inline keyword for TASKING Compiler */ + #define __STATIC_INLINE static inline + +#elif defined ( __CSMC__ ) + #define __packed + #define __ASM _asm /*!< asm keyword for COSMIC Compiler */ + #define __INLINE inline /*!< inline keyword for COSMIC Compiler. Use -pc99 on compile line */ + #define __STATIC_INLINE static inline + +#else + #error Unknown compiler +#endif + +/** __FPU_USED indicates whether an FPU is used or not. + This core does not support an FPU at all +*/ +#define __FPU_USED 0U + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_PCS_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TMS470__ ) + #if defined __TI_VFP_SUPPORT__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#endif + +#include "core_cmInstr.h" /* Core Instruction Access */ +#include "core_cmFunc.h" /* Core Function Access */ + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM3_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM3_H_DEPENDANT +#define __CORE_CM3_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM3_REV + #define __CM3_REV 0x0200U + #warning "__CM3_REV not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 4U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex_M3 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + +#define APSR_Q_Pos 27U /*!< APSR: Q Position */ +#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ +#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ + +#define xPSR_IT_Pos 25U /*!< xPSR: IT Position */ +#define xPSR_IT_Msk (3UL << xPSR_IT_Pos) /*!< xPSR: IT Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[8U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[24U]; + __IOM uint32_t ICER[8U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[24U]; + __IOM uint32_t ISPR[8U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[24U]; + __IOM uint32_t ICPR[8U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[24U]; + __IOM uint32_t IABR[8U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[56U]; + __IOM uint8_t IP[240U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED5[644U]; + __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IOM uint8_t SHP[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __IM uint32_t PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __IM uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __IM uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __IM uint32_t MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __IM uint32_t ISAR[5U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + uint32_t RESERVED0[5U]; + __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#if (__CM3_REV < 0x0201U) /* core r2p1 */ +#define SCB_VTOR_TBLBASE_Pos 29U /*!< SCB VTOR: TBLBASE Position */ +#define SCB_VTOR_TBLBASE_Msk (1UL << SCB_VTOR_TBLBASE_Pos) /*!< SCB VTOR: TBLBASE Mask */ + +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x3FFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ +#else +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ +#endif + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +#define SCB_AIRCR_VECTRESET_Pos 0U /*!< SCB AIRCR: VECTRESET Position */ +#define SCB_AIRCR_VECTRESET_Msk (1UL /*<< SCB_AIRCR_VECTRESET_Pos*/) /*!< SCB AIRCR: VECTRESET Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +#define SCB_CCR_NONBASETHRDENA_Pos 0U /*!< SCB CCR: NONBASETHRDENA Position */ +#define SCB_CCR_NONBASETHRDENA_Msk (1UL /*<< SCB_CCR_NONBASETHRDENA_Pos*/) /*!< SCB CCR: NONBASETHRDENA Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Register Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* SCB Hard Fault Status Register Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ +#if ((defined __CM3_REV) && (__CM3_REV >= 0x200U)) + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ +#else + uint32_t RESERVED1[1U]; +#endif +} SCnSCB_Type; + +/* Interrupt Controller Type Register Definitions */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ + +/* Auxiliary Control Register Definitions */ + +#define SCnSCB_ACTLR_DISFOLD_Pos 2U /*!< ACTLR: DISFOLD Position */ +#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */ + +#define SCnSCB_ACTLR_DISDEFWBUF_Pos 1U /*!< ACTLR: DISDEFWBUF Position */ +#define SCnSCB_ACTLR_DISDEFWBUF_Msk (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos) /*!< ACTLR: DISDEFWBUF Mask */ + +#define SCnSCB_ACTLR_DISMCYCINT_Pos 0U /*!< ACTLR: DISMCYCINT Position */ +#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/) /*!< ACTLR: DISMCYCINT Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) + \brief Type definitions for the Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** + \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __OM union + { + __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864U]; + __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15U]; + __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15U]; + __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[29U]; + __OM uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */ + __IM uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */ + __IOM uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */ + uint32_t RESERVED4[43U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[6U]; + __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TraceBusID_Pos 16U /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPrescale_Pos 8U /*!< ITM TCR: TSPrescale Position */ +#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */ + +#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Integration Write Register Definitions */ +#define ITM_IWR_ATVALIDM_Pos 0U /*!< ITM IWR: ATVALIDM Position */ +#define ITM_IWR_ATVALIDM_Msk (1UL /*<< ITM_IWR_ATVALIDM_Pos*/) /*!< ITM IWR: ATVALIDM Mask */ + +/* ITM Integration Read Register Definitions */ +#define ITM_IRR_ATREADYM_Pos 0U /*!< ITM IRR: ATREADYM Position */ +#define ITM_IRR_ATREADYM_Msk (1UL /*<< ITM_IRR_ATREADYM_Pos*/) /*!< ITM IRR: ATREADYM Mask */ + +/* ITM Integration Mode Control Register Definitions */ +#define ITM_IMCR_INTEGRATION_Pos 0U /*!< ITM IMCR: INTEGRATION Position */ +#define ITM_IMCR_INTEGRATION_Msk (1UL /*<< ITM_IMCR_INTEGRATION_Pos*/) /*!< ITM IMCR: INTEGRATION Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + __IOM uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */ + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED0[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + __IOM uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */ + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + __IOM uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */ + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + __IOM uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */ + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ + +#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ + +#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ + +#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ + +#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ + +#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ + +#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ + +#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ + +#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ + +#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ + +#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ + +#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ + +#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ + +/* DWT CPI Count Register Definitions */ +#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ + +/* DWT Exception Overhead Count Register Definitions */ +#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ + +/* DWT Sleep Count Register Definitions */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ + +/* DWT LSU Count Register Definitions */ +#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ + +/* DWT Folded-instruction Count Register Definitions */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ + +/* DWT Comparator Mask Register Definitions */ +#define DWT_MASK_MASK_Pos 0U /*!< DWT MASK: MASK Position */ +#define DWT_MASK_MASK_Msk (0x1FUL /*<< DWT_MASK_MASK_Pos*/) /*!< DWT MASK: MASK Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVADDR1_Pos 16U /*!< DWT FUNCTION: DATAVADDR1 Position */ +#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */ + +#define DWT_FUNCTION_DATAVADDR0_Pos 12U /*!< DWT FUNCTION: DATAVADDR0 Position */ +#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_LNK1ENA_Pos 9U /*!< DWT FUNCTION: LNK1ENA Position */ +#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */ + +#define DWT_FUNCTION_DATAVMATCH_Pos 8U /*!< DWT FUNCTION: DATAVMATCH Position */ +#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */ + +#define DWT_FUNCTION_CYCMATCH_Pos 7U /*!< DWT FUNCTION: CYCMATCH Position */ +#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */ + +#define DWT_FUNCTION_EMITRANGE_Pos 5U /*!< DWT FUNCTION: EMITRANGE Position */ +#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */ + +#define DWT_FUNCTION_FUNCTION_Pos 0U /*!< DWT FUNCTION: FUNCTION Position */ +#define DWT_FUNCTION_FUNCTION_Msk (0xFUL /*<< DWT_FUNCTION_FUNCTION_Pos*/) /*!< DWT FUNCTION: FUNCTION Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IOM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IM uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */ + uint32_t RESERVED3[759U]; + __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER */ + __IM uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */ + __IM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */ + uint32_t RESERVED4[1U]; + __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */ + __IM uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */ + __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ + uint32_t RESERVED5[39U]; + __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ + __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ + uint32_t RESERVED7[8U]; + __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ +#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI TRIGGER Register Definitions */ +#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ +#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ + +/* TPI Integration ETM Data Register Definitions (FIFO0) */ +#define TPI_FIFO0_ITM_ATVALID_Pos 29U /*!< TPI FIFO0: ITM_ATVALID Position */ +#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */ + +#define TPI_FIFO0_ITM_bytecount_Pos 27U /*!< TPI FIFO0: ITM_bytecount Position */ +#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */ + +#define TPI_FIFO0_ETM_ATVALID_Pos 26U /*!< TPI FIFO0: ETM_ATVALID Position */ +#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */ + +#define TPI_FIFO0_ETM_bytecount_Pos 24U /*!< TPI FIFO0: ETM_bytecount Position */ +#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */ + +#define TPI_FIFO0_ETM2_Pos 16U /*!< TPI FIFO0: ETM2 Position */ +#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */ + +#define TPI_FIFO0_ETM1_Pos 8U /*!< TPI FIFO0: ETM1 Position */ +#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */ + +#define TPI_FIFO0_ETM0_Pos 0U /*!< TPI FIFO0: ETM0 Position */ +#define TPI_FIFO0_ETM0_Msk (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/) /*!< TPI FIFO0: ETM0 Mask */ + +/* TPI ITATBCTR2 Register Definitions */ +#define TPI_ITATBCTR2_ATREADY_Pos 0U /*!< TPI ITATBCTR2: ATREADY Position */ +#define TPI_ITATBCTR2_ATREADY_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY_Pos*/) /*!< TPI ITATBCTR2: ATREADY Mask */ + +/* TPI Integration ITM Data Register Definitions (FIFO1) */ +#define TPI_FIFO1_ITM_ATVALID_Pos 29U /*!< TPI FIFO1: ITM_ATVALID Position */ +#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */ + +#define TPI_FIFO1_ITM_bytecount_Pos 27U /*!< TPI FIFO1: ITM_bytecount Position */ +#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */ + +#define TPI_FIFO1_ETM_ATVALID_Pos 26U /*!< TPI FIFO1: ETM_ATVALID Position */ +#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */ + +#define TPI_FIFO1_ETM_bytecount_Pos 24U /*!< TPI FIFO1: ETM_bytecount Position */ +#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */ + +#define TPI_FIFO1_ITM2_Pos 16U /*!< TPI FIFO1: ITM2 Position */ +#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */ + +#define TPI_FIFO1_ITM1_Pos 8U /*!< TPI FIFO1: ITM1 Position */ +#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */ + +#define TPI_FIFO1_ITM0_Pos 0U /*!< TPI FIFO1: ITM0 Position */ +#define TPI_FIFO1_ITM0_Msk (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/) /*!< TPI FIFO1: ITM0 Mask */ + +/* TPI ITATBCTR0 Register Definitions */ +#define TPI_ITATBCTR0_ATREADY_Pos 0U /*!< TPI ITATBCTR0: ATREADY Position */ +#define TPI_ITATBCTR0_ATREADY_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY_Pos*/) /*!< TPI ITATBCTR0: ATREADY Mask */ + +/* TPI Integration Mode Control Register Definitions */ +#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ +#define TPI_ITCTRL_Mode_Msk (0x1UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_MinBufSz_Pos 6U /*!< TPI DEVID: MinBufSz Position */ +#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */ + +#define TPI_DEVID_AsynClkIn_Pos 5U /*!< TPI DEVID: AsynClkIn Position */ +#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */ + +#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ +#define TPI_DEVID_NrTraceInput_Msk (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_MajorType_Pos 4U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +#define TPI_DEVTYPE_SubType_Pos 0U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ + __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */ + __IOM uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */ + __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */ + __IOM uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */ + __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */ + __IOM uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */ +} MPU_Type; + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_ADDR_Pos 5U /*!< MPU RBAR: ADDR Position */ +#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ + +#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */ +#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ + +#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */ +#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */ + +/* MPU Region Attribute and Size Register Definitions */ +#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */ +#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ + +#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */ +#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ + +#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */ +#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ + +#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */ +#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ + +#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */ +#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ + +#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */ +#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ + +#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */ +#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ + +#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */ +#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ + +#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */ +#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ + +#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */ +#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register Definitions */ +#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) ((value << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) ((value & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Cortex-M3 Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ +#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ +#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ +#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ +#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ +#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ +#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ +#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */ + +#if (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ +#endif + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +/** + \brief Set Priority Grouping + \details Sets the priority grouping field using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << 8U) ); /* Insert write key and priorty group */ + SCB->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping + \details Reads the priority grouping field from the NVIC Interrupt Controller. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t NVIC_GetPriorityGrouping(void) +{ + return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable External Interrupt + \details Enables a device-specific interrupt in the NVIC interrupt controller. + \param [in] IRQn External interrupt number. Value cannot be negative. + */ +__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn) +{ + NVIC->ISER[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL)); +} + + +/** + \brief Disable External Interrupt + \details Disables a device-specific interrupt in the NVIC interrupt controller. + \param [in] IRQn External interrupt number. Value cannot be negative. + */ +__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn) +{ + NVIC->ICER[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL)); +} + + +/** + \brief Get Pending Interrupt + \details Reads the pending register in the NVIC and returns the pending bit for the specified interrupt. + \param [in] IRQn Interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + */ +__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + return((uint32_t)(((NVIC->ISPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of an external interrupt. + \param [in] IRQn Interrupt number. Value cannot be negative. + */ +__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + NVIC->ISPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL)); +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of an external interrupt. + \param [in] IRQn External interrupt number. Value cannot be negative. + */ +__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + NVIC->ICPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL)); +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in NVIC and returns the active bit. + \param [in] IRQn Interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + */ +__STATIC_INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn) +{ + return((uint32_t)(((NVIC->IABR[(((uint32_t)(int32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); +} + + +/** + \brief Set Interrupt Priority + \details Sets the priority of an interrupt. + \note The priority cannot be set for every core interrupt. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + */ +__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) < 0) + { + SCB->SHP[(((uint32_t)(int32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + NVIC->IP[((uint32_t)(int32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of an interrupt. + The interrupt number can be positive to specify an external (device specific) interrupt, + or negative to specify an internal (core) interrupt. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) < 0) + { + return(((uint32_t)SCB->SHP[(((uint32_t)(int32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)NVIC->IP[((uint32_t)(int32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__STATIC_INLINE void NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +/*@} end of CMSIS_Core_NVICFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions ITM Functions + \brief Functions that access the ITM debug interface. + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY 0x5AA55AA5U /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + + +/** + \brief ITM Send Character + \details Transmits a character via the ITM channel 0, and + \li Just returns when no debugger is connected that has booked the output. + \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. + \param [in] ch Character to transmit. + \returns Character to transmit. + */ +__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ + ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0U].u32 == 0UL) + { + __NOP(); + } + ITM->PORT[0U].u8 = (uint8_t)ch; + } + return (ch); +} + + +/** + \brief ITM Receive Character + \details Inputs a character via the external variable \ref ITM_RxBuffer. + \return Received character. + \return -1 No character pending. + */ +__STATIC_INLINE int32_t ITM_ReceiveChar (void) +{ + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) + { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + \brief ITM Check Character + \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. + \return 0 No character available. + \return 1 Character available. + */ +__STATIC_INLINE int32_t ITM_CheckChar (void) +{ + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) + { + return (0); /* no character available */ + } + else + { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM3_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/src/boards/mcu/stm32/cmsis/core_cm4.h b/src/boards/mcu/stm32/cmsis/core_cm4.h new file mode 100755 index 0000000..01cb73b --- /dev/null +++ b/src/boards/mcu/stm32/cmsis/core_cm4.h @@ -0,0 +1,1937 @@ +/**************************************************************************//** + * @file core_cm4.h + * @brief CMSIS Cortex-M4 Core Peripheral Access Layer Header File + * @version V4.30 + * @date 20. October 2015 + ******************************************************************************/ +/* Copyright (c) 2009 - 2015 ARM LIMITED + + All rights reserved. + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are met: + - Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + - Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + - Neither the name of ARM nor the names of its contributors may be used + to endorse or promote products derived from this software without + specific prior written permission. + * + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + POSSIBILITY OF SUCH DAMAGE. + ---------------------------------------------------------------------------*/ + + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_CM4_H_GENERIC +#define __CORE_CM4_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_M4 + @{ + */ + +/* CMSIS CM4 definitions */ +#define __CM4_CMSIS_VERSION_MAIN (0x04U) /*!< [31:16] CMSIS HAL main version */ +#define __CM4_CMSIS_VERSION_SUB (0x1EU) /*!< [15:0] CMSIS HAL sub version */ +#define __CM4_CMSIS_VERSION ((__CM4_CMSIS_VERSION_MAIN << 16U) | \ + __CM4_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */ + +#define __CORTEX_M (0x04U) /*!< Cortex-M Core */ + + +#if defined ( __CC_ARM ) + #define __ASM __asm /*!< asm keyword for ARM Compiler */ + #define __INLINE __inline /*!< inline keyword for ARM Compiler */ + #define __STATIC_INLINE static __inline + +#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #define __ASM __asm /*!< asm keyword for ARM Compiler */ + #define __INLINE __inline /*!< inline keyword for ARM Compiler */ + #define __STATIC_INLINE static __inline + +#elif defined ( __GNUC__ ) + #define __ASM __asm /*!< asm keyword for GNU Compiler */ + #define __INLINE inline /*!< inline keyword for GNU Compiler */ + #define __STATIC_INLINE static inline + +#elif defined ( __ICCARM__ ) + #define __ASM __asm /*!< asm keyword for IAR Compiler */ + #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */ + #define __STATIC_INLINE static inline + +#elif defined ( __TMS470__ ) + #define __ASM __asm /*!< asm keyword for TI CCS Compiler */ + #define __STATIC_INLINE static inline + +#elif defined ( __TASKING__ ) + #define __ASM __asm /*!< asm keyword for TASKING Compiler */ + #define __INLINE inline /*!< inline keyword for TASKING Compiler */ + #define __STATIC_INLINE static inline + +#elif defined ( __CSMC__ ) + #define __packed + #define __ASM _asm /*!< asm keyword for COSMIC Compiler */ + #define __INLINE inline /*!< inline keyword for COSMIC Compiler. Use -pc99 on compile line */ + #define __STATIC_INLINE static inline + +#else + #error Unknown compiler +#endif + +/** __FPU_USED indicates whether an FPU is used or not. + For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions. +*/ +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #if (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_PCS_VFP + #if (__FPU_PRESENT == 1) + #define __FPU_USED 1U + #else + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #if (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #if (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __TMS470__ ) + #if defined __TI_VFP_SUPPORT__ + #if (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #if (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #if (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#endif + +#include "core_cmInstr.h" /* Core Instruction Access */ +#include "core_cmFunc.h" /* Core Function Access */ +#include "core_cmSimd.h" /* Compiler specific SIMD Intrinsics */ + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM4_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM4_H_DEPENDANT +#define __CORE_CM4_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM4_REV + #define __CM4_REV 0x0000U + #warning "__CM4_REV not defined in device header file; using default!" + #endif + + #ifndef __FPU_PRESENT + #define __FPU_PRESENT 0U + #warning "__FPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 4U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex_M4 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + - Core FPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + +#define APSR_Q_Pos 27U /*!< APSR: Q Position */ +#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ + +#define APSR_GE_Pos 16U /*!< APSR: GE Position */ +#define APSR_GE_Msk (0xFUL << APSR_GE_Pos) /*!< APSR: GE Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ +#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ + +#define xPSR_IT_Pos 25U /*!< xPSR: IT Position */ +#define xPSR_IT_Msk (3UL << xPSR_IT_Pos) /*!< xPSR: IT Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_GE_Pos 16U /*!< xPSR: GE Position */ +#define xPSR_GE_Msk (0xFUL << xPSR_GE_Pos) /*!< xPSR: GE Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */ + uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_FPCA_Pos 2U /*!< CONTROL: FPCA Position */ +#define CONTROL_FPCA_Msk (1UL << CONTROL_FPCA_Pos) /*!< CONTROL: FPCA Mask */ + +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[8U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[24U]; + __IOM uint32_t ICER[8U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[24U]; + __IOM uint32_t ISPR[8U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[24U]; + __IOM uint32_t ICPR[8U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[24U]; + __IOM uint32_t IABR[8U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[56U]; + __IOM uint8_t IP[240U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED5[644U]; + __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IOM uint8_t SHP[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __IM uint32_t PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __IM uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __IM uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __IM uint32_t MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __IM uint32_t ISAR[5U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + uint32_t RESERVED0[5U]; + __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +#define SCB_AIRCR_VECTRESET_Pos 0U /*!< SCB AIRCR: VECTRESET Position */ +#define SCB_AIRCR_VECTRESET_Msk (1UL /*<< SCB_AIRCR_VECTRESET_Pos*/) /*!< SCB AIRCR: VECTRESET Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +#define SCB_CCR_NONBASETHRDENA_Pos 0U /*!< SCB CCR: NONBASETHRDENA Position */ +#define SCB_CCR_NONBASETHRDENA_Msk (1UL /*<< SCB_CCR_NONBASETHRDENA_Pos*/) /*!< SCB CCR: NONBASETHRDENA Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Register Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* SCB Hard Fault Status Register Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ +} SCnSCB_Type; + +/* Interrupt Controller Type Register Definitions */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ + +/* Auxiliary Control Register Definitions */ +#define SCnSCB_ACTLR_DISOOFP_Pos 9U /*!< ACTLR: DISOOFP Position */ +#define SCnSCB_ACTLR_DISOOFP_Msk (1UL << SCnSCB_ACTLR_DISOOFP_Pos) /*!< ACTLR: DISOOFP Mask */ + +#define SCnSCB_ACTLR_DISFPCA_Pos 8U /*!< ACTLR: DISFPCA Position */ +#define SCnSCB_ACTLR_DISFPCA_Msk (1UL << SCnSCB_ACTLR_DISFPCA_Pos) /*!< ACTLR: DISFPCA Mask */ + +#define SCnSCB_ACTLR_DISFOLD_Pos 2U /*!< ACTLR: DISFOLD Position */ +#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */ + +#define SCnSCB_ACTLR_DISDEFWBUF_Pos 1U /*!< ACTLR: DISDEFWBUF Position */ +#define SCnSCB_ACTLR_DISDEFWBUF_Msk (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos) /*!< ACTLR: DISDEFWBUF Mask */ + +#define SCnSCB_ACTLR_DISMCYCINT_Pos 0U /*!< ACTLR: DISMCYCINT Position */ +#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/) /*!< ACTLR: DISMCYCINT Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) + \brief Type definitions for the Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** + \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __OM union + { + __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864U]; + __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15U]; + __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15U]; + __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[29U]; + __OM uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */ + __IM uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */ + __IOM uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */ + uint32_t RESERVED4[43U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[6U]; + __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TraceBusID_Pos 16U /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPrescale_Pos 8U /*!< ITM TCR: TSPrescale Position */ +#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */ + +#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Integration Write Register Definitions */ +#define ITM_IWR_ATVALIDM_Pos 0U /*!< ITM IWR: ATVALIDM Position */ +#define ITM_IWR_ATVALIDM_Msk (1UL /*<< ITM_IWR_ATVALIDM_Pos*/) /*!< ITM IWR: ATVALIDM Mask */ + +/* ITM Integration Read Register Definitions */ +#define ITM_IRR_ATREADYM_Pos 0U /*!< ITM IRR: ATREADYM Position */ +#define ITM_IRR_ATREADYM_Msk (1UL /*<< ITM_IRR_ATREADYM_Pos*/) /*!< ITM IRR: ATREADYM Mask */ + +/* ITM Integration Mode Control Register Definitions */ +#define ITM_IMCR_INTEGRATION_Pos 0U /*!< ITM IMCR: INTEGRATION Position */ +#define ITM_IMCR_INTEGRATION_Msk (1UL /*<< ITM_IMCR_INTEGRATION_Pos*/) /*!< ITM IMCR: INTEGRATION Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + __IOM uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */ + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED0[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + __IOM uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */ + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + __IOM uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */ + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + __IOM uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */ + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ + +#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ + +#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ + +#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ + +#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ + +#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ + +#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ + +#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ + +#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ + +#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ + +#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ + +#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ + +#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ + +/* DWT CPI Count Register Definitions */ +#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ + +/* DWT Exception Overhead Count Register Definitions */ +#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ + +/* DWT Sleep Count Register Definitions */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ + +/* DWT LSU Count Register Definitions */ +#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ + +/* DWT Folded-instruction Count Register Definitions */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ + +/* DWT Comparator Mask Register Definitions */ +#define DWT_MASK_MASK_Pos 0U /*!< DWT MASK: MASK Position */ +#define DWT_MASK_MASK_Msk (0x1FUL /*<< DWT_MASK_MASK_Pos*/) /*!< DWT MASK: MASK Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVADDR1_Pos 16U /*!< DWT FUNCTION: DATAVADDR1 Position */ +#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */ + +#define DWT_FUNCTION_DATAVADDR0_Pos 12U /*!< DWT FUNCTION: DATAVADDR0 Position */ +#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_LNK1ENA_Pos 9U /*!< DWT FUNCTION: LNK1ENA Position */ +#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */ + +#define DWT_FUNCTION_DATAVMATCH_Pos 8U /*!< DWT FUNCTION: DATAVMATCH Position */ +#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */ + +#define DWT_FUNCTION_CYCMATCH_Pos 7U /*!< DWT FUNCTION: CYCMATCH Position */ +#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */ + +#define DWT_FUNCTION_EMITRANGE_Pos 5U /*!< DWT FUNCTION: EMITRANGE Position */ +#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */ + +#define DWT_FUNCTION_FUNCTION_Pos 0U /*!< DWT FUNCTION: FUNCTION Position */ +#define DWT_FUNCTION_FUNCTION_Msk (0xFUL /*<< DWT_FUNCTION_FUNCTION_Pos*/) /*!< DWT FUNCTION: FUNCTION Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IOM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IM uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */ + uint32_t RESERVED3[759U]; + __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER */ + __IM uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */ + __IM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */ + uint32_t RESERVED4[1U]; + __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */ + __IM uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */ + __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ + uint32_t RESERVED5[39U]; + __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ + __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ + uint32_t RESERVED7[8U]; + __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ +#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI TRIGGER Register Definitions */ +#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ +#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ + +/* TPI Integration ETM Data Register Definitions (FIFO0) */ +#define TPI_FIFO0_ITM_ATVALID_Pos 29U /*!< TPI FIFO0: ITM_ATVALID Position */ +#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */ + +#define TPI_FIFO0_ITM_bytecount_Pos 27U /*!< TPI FIFO0: ITM_bytecount Position */ +#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */ + +#define TPI_FIFO0_ETM_ATVALID_Pos 26U /*!< TPI FIFO0: ETM_ATVALID Position */ +#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */ + +#define TPI_FIFO0_ETM_bytecount_Pos 24U /*!< TPI FIFO0: ETM_bytecount Position */ +#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */ + +#define TPI_FIFO0_ETM2_Pos 16U /*!< TPI FIFO0: ETM2 Position */ +#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */ + +#define TPI_FIFO0_ETM1_Pos 8U /*!< TPI FIFO0: ETM1 Position */ +#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */ + +#define TPI_FIFO0_ETM0_Pos 0U /*!< TPI FIFO0: ETM0 Position */ +#define TPI_FIFO0_ETM0_Msk (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/) /*!< TPI FIFO0: ETM0 Mask */ + +/* TPI ITATBCTR2 Register Definitions */ +#define TPI_ITATBCTR2_ATREADY_Pos 0U /*!< TPI ITATBCTR2: ATREADY Position */ +#define TPI_ITATBCTR2_ATREADY_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY_Pos*/) /*!< TPI ITATBCTR2: ATREADY Mask */ + +/* TPI Integration ITM Data Register Definitions (FIFO1) */ +#define TPI_FIFO1_ITM_ATVALID_Pos 29U /*!< TPI FIFO1: ITM_ATVALID Position */ +#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */ + +#define TPI_FIFO1_ITM_bytecount_Pos 27U /*!< TPI FIFO1: ITM_bytecount Position */ +#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */ + +#define TPI_FIFO1_ETM_ATVALID_Pos 26U /*!< TPI FIFO1: ETM_ATVALID Position */ +#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */ + +#define TPI_FIFO1_ETM_bytecount_Pos 24U /*!< TPI FIFO1: ETM_bytecount Position */ +#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */ + +#define TPI_FIFO1_ITM2_Pos 16U /*!< TPI FIFO1: ITM2 Position */ +#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */ + +#define TPI_FIFO1_ITM1_Pos 8U /*!< TPI FIFO1: ITM1 Position */ +#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */ + +#define TPI_FIFO1_ITM0_Pos 0U /*!< TPI FIFO1: ITM0 Position */ +#define TPI_FIFO1_ITM0_Msk (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/) /*!< TPI FIFO1: ITM0 Mask */ + +/* TPI ITATBCTR0 Register Definitions */ +#define TPI_ITATBCTR0_ATREADY_Pos 0U /*!< TPI ITATBCTR0: ATREADY Position */ +#define TPI_ITATBCTR0_ATREADY_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY_Pos*/) /*!< TPI ITATBCTR0: ATREADY Mask */ + +/* TPI Integration Mode Control Register Definitions */ +#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ +#define TPI_ITCTRL_Mode_Msk (0x1UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_MinBufSz_Pos 6U /*!< TPI DEVID: MinBufSz Position */ +#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */ + +#define TPI_DEVID_AsynClkIn_Pos 5U /*!< TPI DEVID: AsynClkIn Position */ +#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */ + +#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ +#define TPI_DEVID_NrTraceInput_Msk (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_MajorType_Pos 4U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +#define TPI_DEVTYPE_SubType_Pos 0U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ + __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */ + __IOM uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */ + __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */ + __IOM uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */ + __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */ + __IOM uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */ +} MPU_Type; + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_ADDR_Pos 5U /*!< MPU RBAR: ADDR Position */ +#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ + +#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */ +#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ + +#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */ +#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */ + +/* MPU Region Attribute and Size Register Definitions */ +#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */ +#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ + +#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */ +#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ + +#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */ +#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ + +#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */ +#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ + +#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */ +#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ + +#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */ +#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ + +#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */ +#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ + +#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */ +#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ + +#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */ +#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ + +#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */ +#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +#if (__FPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_FPU Floating Point Unit (FPU) + \brief Type definitions for the Floating Point Unit (FPU) + @{ + */ + +/** + \brief Structure type to access the Floating Point Unit (FPU). + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IOM uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */ + __IOM uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */ + __IOM uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */ + __IM uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */ +} FPU_Type; + +/* Floating-Point Context Control Register Definitions */ +#define FPU_FPCCR_ASPEN_Pos 31U /*!< FPCCR: ASPEN bit Position */ +#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */ + +#define FPU_FPCCR_LSPEN_Pos 30U /*!< FPCCR: LSPEN Position */ +#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */ + +#define FPU_FPCCR_MONRDY_Pos 8U /*!< FPCCR: MONRDY Position */ +#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */ + +#define FPU_FPCCR_BFRDY_Pos 6U /*!< FPCCR: BFRDY Position */ +#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */ + +#define FPU_FPCCR_MMRDY_Pos 5U /*!< FPCCR: MMRDY Position */ +#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */ + +#define FPU_FPCCR_HFRDY_Pos 4U /*!< FPCCR: HFRDY Position */ +#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */ + +#define FPU_FPCCR_THREAD_Pos 3U /*!< FPCCR: processor mode bit Position */ +#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */ + +#define FPU_FPCCR_USER_Pos 1U /*!< FPCCR: privilege level bit Position */ +#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */ + +#define FPU_FPCCR_LSPACT_Pos 0U /*!< FPCCR: Lazy state preservation active bit Position */ +#define FPU_FPCCR_LSPACT_Msk (1UL /*<< FPU_FPCCR_LSPACT_Pos*/) /*!< FPCCR: Lazy state preservation active bit Mask */ + +/* Floating-Point Context Address Register Definitions */ +#define FPU_FPCAR_ADDRESS_Pos 3U /*!< FPCAR: ADDRESS bit Position */ +#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */ + +/* Floating-Point Default Status Control Register Definitions */ +#define FPU_FPDSCR_AHP_Pos 26U /*!< FPDSCR: AHP bit Position */ +#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */ + +#define FPU_FPDSCR_DN_Pos 25U /*!< FPDSCR: DN bit Position */ +#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */ + +#define FPU_FPDSCR_FZ_Pos 24U /*!< FPDSCR: FZ bit Position */ +#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */ + +#define FPU_FPDSCR_RMode_Pos 22U /*!< FPDSCR: RMode bit Position */ +#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */ + +/* Media and FP Feature Register 0 Definitions */ +#define FPU_MVFR0_FP_rounding_modes_Pos 28U /*!< MVFR0: FP rounding modes bits Position */ +#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */ + +#define FPU_MVFR0_Short_vectors_Pos 24U /*!< MVFR0: Short vectors bits Position */ +#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */ + +#define FPU_MVFR0_Square_root_Pos 20U /*!< MVFR0: Square root bits Position */ +#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */ + +#define FPU_MVFR0_Divide_Pos 16U /*!< MVFR0: Divide bits Position */ +#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */ + +#define FPU_MVFR0_FP_excep_trapping_Pos 12U /*!< MVFR0: FP exception trapping bits Position */ +#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */ + +#define FPU_MVFR0_Double_precision_Pos 8U /*!< MVFR0: Double-precision bits Position */ +#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */ + +#define FPU_MVFR0_Single_precision_Pos 4U /*!< MVFR0: Single-precision bits Position */ +#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */ + +#define FPU_MVFR0_A_SIMD_registers_Pos 0U /*!< MVFR0: A_SIMD registers bits Position */ +#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL /*<< FPU_MVFR0_A_SIMD_registers_Pos*/) /*!< MVFR0: A_SIMD registers bits Mask */ + +/* Media and FP Feature Register 1 Definitions */ +#define FPU_MVFR1_FP_fused_MAC_Pos 28U /*!< MVFR1: FP fused MAC bits Position */ +#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */ + +#define FPU_MVFR1_FP_HPFP_Pos 24U /*!< MVFR1: FP HPFP bits Position */ +#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */ + +#define FPU_MVFR1_D_NaN_mode_Pos 4U /*!< MVFR1: D_NaN mode bits Position */ +#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */ + +#define FPU_MVFR1_FtZ_mode_Pos 0U /*!< MVFR1: FtZ mode bits Position */ +#define FPU_MVFR1_FtZ_mode_Msk (0xFUL /*<< FPU_MVFR1_FtZ_mode_Pos*/) /*!< MVFR1: FtZ mode bits Mask */ + +/*@} end of group CMSIS_FPU */ +#endif + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register Definitions */ +#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) ((value << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) ((value & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Cortex-M4 Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ +#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ +#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ +#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ +#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ +#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ +#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ +#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */ + +#if (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ +#endif + +#if (__FPU_PRESENT == 1U) + #define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */ + #define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */ +#endif + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +/** + \brief Set Priority Grouping + \details Sets the priority grouping field using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << 8U) ); /* Insert write key and priorty group */ + SCB->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping + \details Reads the priority grouping field from the NVIC Interrupt Controller. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t NVIC_GetPriorityGrouping(void) +{ + return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable External Interrupt + \details Enables a device-specific interrupt in the NVIC interrupt controller. + \param [in] IRQn External interrupt number. Value cannot be negative. + */ +__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn) +{ + NVIC->ISER[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL)); +} + + +/** + \brief Disable External Interrupt + \details Disables a device-specific interrupt in the NVIC interrupt controller. + \param [in] IRQn External interrupt number. Value cannot be negative. + */ +__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn) +{ + NVIC->ICER[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL)); +} + + +/** + \brief Get Pending Interrupt + \details Reads the pending register in the NVIC and returns the pending bit for the specified interrupt. + \param [in] IRQn Interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + */ +__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + return((uint32_t)(((NVIC->ISPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of an external interrupt. + \param [in] IRQn Interrupt number. Value cannot be negative. + */ +__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + NVIC->ISPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL)); +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of an external interrupt. + \param [in] IRQn External interrupt number. Value cannot be negative. + */ +__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + NVIC->ICPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL)); +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in NVIC and returns the active bit. + \param [in] IRQn Interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + */ +__STATIC_INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn) +{ + return((uint32_t)(((NVIC->IABR[(((uint32_t)(int32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); +} + + +/** + \brief Set Interrupt Priority + \details Sets the priority of an interrupt. + \note The priority cannot be set for every core interrupt. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + */ +__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) < 0) + { + SCB->SHP[(((uint32_t)(int32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + NVIC->IP[((uint32_t)(int32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of an interrupt. + The interrupt number can be positive to specify an external (device specific) interrupt, + or negative to specify an internal (core) interrupt. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) < 0) + { + return(((uint32_t)SCB->SHP[(((uint32_t)(int32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)NVIC->IP[((uint32_t)(int32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__STATIC_INLINE void NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +/*@} end of CMSIS_Core_NVICFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions ITM Functions + \brief Functions that access the ITM debug interface. + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY 0x5AA55AA5U /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + + +/** + \brief ITM Send Character + \details Transmits a character via the ITM channel 0, and + \li Just returns when no debugger is connected that has booked the output. + \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. + \param [in] ch Character to transmit. + \returns Character to transmit. + */ +__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ + ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0U].u32 == 0UL) + { + __NOP(); + } + ITM->PORT[0U].u8 = (uint8_t)ch; + } + return (ch); +} + + +/** + \brief ITM Receive Character + \details Inputs a character via the external variable \ref ITM_RxBuffer. + \return Received character. + \return -1 No character pending. + */ +__STATIC_INLINE int32_t ITM_ReceiveChar (void) +{ + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) + { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + \brief ITM Check Character + \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. + \return 0 No character available. + \return 1 Character available. + */ +__STATIC_INLINE int32_t ITM_CheckChar (void) +{ + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) + { + return (0); /* no character available */ + } + else + { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM4_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/src/boards/mcu/stm32/cmsis/core_cm7.h b/src/boards/mcu/stm32/cmsis/core_cm7.h new file mode 100755 index 0000000..20963c1 --- /dev/null +++ b/src/boards/mcu/stm32/cmsis/core_cm7.h @@ -0,0 +1,2512 @@ +/**************************************************************************//** + * @file core_cm7.h + * @brief CMSIS Cortex-M7 Core Peripheral Access Layer Header File + * @version V4.30 + * @date 20. October 2015 + ******************************************************************************/ +/* Copyright (c) 2009 - 2015 ARM LIMITED + + All rights reserved. + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are met: + - Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + - Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + - Neither the name of ARM nor the names of its contributors may be used + to endorse or promote products derived from this software without + specific prior written permission. + * + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + POSSIBILITY OF SUCH DAMAGE. + ---------------------------------------------------------------------------*/ + + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_CM7_H_GENERIC +#define __CORE_CM7_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_M7 + @{ + */ + +/* CMSIS CM7 definitions */ +#define __CM7_CMSIS_VERSION_MAIN (0x04U) /*!< [31:16] CMSIS HAL main version */ +#define __CM7_CMSIS_VERSION_SUB (0x1EU) /*!< [15:0] CMSIS HAL sub version */ +#define __CM7_CMSIS_VERSION ((__CM7_CMSIS_VERSION_MAIN << 16U) | \ + __CM7_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */ + +#define __CORTEX_M (0x07U) /*!< Cortex-M Core */ + + +#if defined ( __CC_ARM ) + #define __ASM __asm /*!< asm keyword for ARM Compiler */ + #define __INLINE __inline /*!< inline keyword for ARM Compiler */ + #define __STATIC_INLINE static __inline + +#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #define __ASM __asm /*!< asm keyword for ARM Compiler */ + #define __INLINE __inline /*!< inline keyword for ARM Compiler */ + #define __STATIC_INLINE static __inline + +#elif defined ( __GNUC__ ) + #define __ASM __asm /*!< asm keyword for GNU Compiler */ + #define __INLINE inline /*!< inline keyword for GNU Compiler */ + #define __STATIC_INLINE static inline + +#elif defined ( __ICCARM__ ) + #define __ASM __asm /*!< asm keyword for IAR Compiler */ + #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */ + #define __STATIC_INLINE static inline + +#elif defined ( __TMS470__ ) + #define __ASM __asm /*!< asm keyword for TI CCS Compiler */ + #define __STATIC_INLINE static inline + +#elif defined ( __TASKING__ ) + #define __ASM __asm /*!< asm keyword for TASKING Compiler */ + #define __INLINE inline /*!< inline keyword for TASKING Compiler */ + #define __STATIC_INLINE static inline + +#elif defined ( __CSMC__ ) + #define __packed + #define __ASM _asm /*!< asm keyword for COSMIC Compiler */ + #define __INLINE inline /*!< inline keyword for COSMIC Compiler. Use -pc99 on compile line */ + #define __STATIC_INLINE static inline + +#else + #error Unknown compiler +#endif + +/** __FPU_USED indicates whether an FPU is used or not. + For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions. +*/ +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #if (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_PCS_VFP + #if (__FPU_PRESENT == 1) + #define __FPU_USED 1U + #else + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #if (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #if (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __TMS470__ ) + #if defined __TI_VFP_SUPPORT__ + #if (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #if (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #if (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#endif + +#include "core_cmInstr.h" /* Core Instruction Access */ +#include "core_cmFunc.h" /* Core Function Access */ +#include "core_cmSimd.h" /* Compiler specific SIMD Intrinsics */ + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM7_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM7_H_DEPENDANT +#define __CORE_CM7_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM7_REV + #define __CM7_REV 0x0000U + #warning "__CM7_REV not defined in device header file; using default!" + #endif + + #ifndef __FPU_PRESENT + #define __FPU_PRESENT 0U + #warning "__FPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __ICACHE_PRESENT + #define __ICACHE_PRESENT 0U + #warning "__ICACHE_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __DCACHE_PRESENT + #define __DCACHE_PRESENT 0U + #warning "__DCACHE_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __DTCM_PRESENT + #define __DTCM_PRESENT 0U + #warning "__DTCM_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 3U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex_M7 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + - Core FPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + +#define APSR_Q_Pos 27U /*!< APSR: Q Position */ +#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ + +#define APSR_GE_Pos 16U /*!< APSR: GE Position */ +#define APSR_GE_Msk (0xFUL << APSR_GE_Pos) /*!< APSR: GE Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ +#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ + +#define xPSR_IT_Pos 25U /*!< xPSR: IT Position */ +#define xPSR_IT_Msk (3UL << xPSR_IT_Pos) /*!< xPSR: IT Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_GE_Pos 16U /*!< xPSR: GE Position */ +#define xPSR_GE_Msk (0xFUL << xPSR_GE_Pos) /*!< xPSR: GE Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */ + uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_FPCA_Pos 2U /*!< CONTROL: FPCA Position */ +#define CONTROL_FPCA_Msk (1UL << CONTROL_FPCA_Pos) /*!< CONTROL: FPCA Mask */ + +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[8U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[24U]; + __IOM uint32_t ICER[8U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[24U]; + __IOM uint32_t ISPR[8U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[24U]; + __IOM uint32_t ICPR[8U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[24U]; + __IOM uint32_t IABR[8U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[56U]; + __IOM uint8_t IP[240U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED5[644U]; + __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IOM uint8_t SHPR[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __IM uint32_t ID_PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __IM uint32_t ID_DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __IM uint32_t ID_AFR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __IM uint32_t ID_MFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __IM uint32_t ID_ISAR[5U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + uint32_t RESERVED0[1U]; + __IM uint32_t CLIDR; /*!< Offset: 0x078 (R/ ) Cache Level ID register */ + __IM uint32_t CTR; /*!< Offset: 0x07C (R/ ) Cache Type register */ + __IM uint32_t CCSIDR; /*!< Offset: 0x080 (R/ ) Cache Size ID Register */ + __IOM uint32_t CSSELR; /*!< Offset: 0x084 (R/W) Cache Size Selection Register */ + __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ + uint32_t RESERVED3[93U]; + __OM uint32_t STIR; /*!< Offset: 0x200 ( /W) Software Triggered Interrupt Register */ + uint32_t RESERVED4[15U]; + __IM uint32_t MVFR0; /*!< Offset: 0x240 (R/ ) Media and VFP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x244 (R/ ) Media and VFP Feature Register 1 */ + __IM uint32_t MVFR2; /*!< Offset: 0x248 (R/ ) Media and VFP Feature Register 1 */ + uint32_t RESERVED5[1U]; + __OM uint32_t ICIALLU; /*!< Offset: 0x250 ( /W) I-Cache Invalidate All to PoU */ + uint32_t RESERVED6[1U]; + __OM uint32_t ICIMVAU; /*!< Offset: 0x258 ( /W) I-Cache Invalidate by MVA to PoU */ + __OM uint32_t DCIMVAC; /*!< Offset: 0x25C ( /W) D-Cache Invalidate by MVA to PoC */ + __OM uint32_t DCISW; /*!< Offset: 0x260 ( /W) D-Cache Invalidate by Set-way */ + __OM uint32_t DCCMVAU; /*!< Offset: 0x264 ( /W) D-Cache Clean by MVA to PoU */ + __OM uint32_t DCCMVAC; /*!< Offset: 0x268 ( /W) D-Cache Clean by MVA to PoC */ + __OM uint32_t DCCSW; /*!< Offset: 0x26C ( /W) D-Cache Clean by Set-way */ + __OM uint32_t DCCIMVAC; /*!< Offset: 0x270 ( /W) D-Cache Clean and Invalidate by MVA to PoC */ + __OM uint32_t DCCISW; /*!< Offset: 0x274 ( /W) D-Cache Clean and Invalidate by Set-way */ + uint32_t RESERVED7[6U]; + __IOM uint32_t ITCMCR; /*!< Offset: 0x290 (R/W) Instruction Tightly-Coupled Memory Control Register */ + __IOM uint32_t DTCMCR; /*!< Offset: 0x294 (R/W) Data Tightly-Coupled Memory Control Registers */ + __IOM uint32_t AHBPCR; /*!< Offset: 0x298 (R/W) AHBP Control Register */ + __IOM uint32_t CACR; /*!< Offset: 0x29C (R/W) L1 Cache Control Register */ + __IOM uint32_t AHBSCR; /*!< Offset: 0x2A0 (R/W) AHB Slave Control Register */ + uint32_t RESERVED8[1U]; + __IOM uint32_t ABFSR; /*!< Offset: 0x2A8 (R/W) Auxiliary Bus Fault Status Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +#define SCB_AIRCR_VECTRESET_Pos 0U /*!< SCB AIRCR: VECTRESET Position */ +#define SCB_AIRCR_VECTRESET_Msk (1UL /*<< SCB_AIRCR_VECTRESET_Pos*/) /*!< SCB AIRCR: VECTRESET Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_BP_Pos 18U /*!< SCB CCR: Branch prediction enable bit Position */ +#define SCB_CCR_BP_Msk (1UL << SCB_CCR_BP_Pos) /*!< SCB CCR: Branch prediction enable bit Mask */ + +#define SCB_CCR_IC_Pos 17U /*!< SCB CCR: Instruction cache enable bit Position */ +#define SCB_CCR_IC_Msk (1UL << SCB_CCR_IC_Pos) /*!< SCB CCR: Instruction cache enable bit Mask */ + +#define SCB_CCR_DC_Pos 16U /*!< SCB CCR: Cache enable bit Position */ +#define SCB_CCR_DC_Msk (1UL << SCB_CCR_DC_Pos) /*!< SCB CCR: Cache enable bit Mask */ + +#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +#define SCB_CCR_NONBASETHRDENA_Pos 0U /*!< SCB CCR: NONBASETHRDENA Position */ +#define SCB_CCR_NONBASETHRDENA_Msk (1UL /*<< SCB_CCR_NONBASETHRDENA_Pos*/) /*!< SCB CCR: NONBASETHRDENA Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Register Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* SCB Hard Fault Status Register Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ + +/* SCB Cache Level ID Register Definitions */ +#define SCB_CLIDR_LOUU_Pos 27U /*!< SCB CLIDR: LoUU Position */ +#define SCB_CLIDR_LOUU_Msk (7UL << SCB_CLIDR_LOUU_Pos) /*!< SCB CLIDR: LoUU Mask */ + +#define SCB_CLIDR_LOC_Pos 24U /*!< SCB CLIDR: LoC Position */ +#define SCB_CLIDR_LOC_Msk (7UL << SCB_CLIDR_LOC_Pos) /*!< SCB CLIDR: LoC Mask */ + +/* SCB Cache Type Register Definitions */ +#define SCB_CTR_FORMAT_Pos 29U /*!< SCB CTR: Format Position */ +#define SCB_CTR_FORMAT_Msk (7UL << SCB_CTR_FORMAT_Pos) /*!< SCB CTR: Format Mask */ + +#define SCB_CTR_CWG_Pos 24U /*!< SCB CTR: CWG Position */ +#define SCB_CTR_CWG_Msk (0xFUL << SCB_CTR_CWG_Pos) /*!< SCB CTR: CWG Mask */ + +#define SCB_CTR_ERG_Pos 20U /*!< SCB CTR: ERG Position */ +#define SCB_CTR_ERG_Msk (0xFUL << SCB_CTR_ERG_Pos) /*!< SCB CTR: ERG Mask */ + +#define SCB_CTR_DMINLINE_Pos 16U /*!< SCB CTR: DminLine Position */ +#define SCB_CTR_DMINLINE_Msk (0xFUL << SCB_CTR_DMINLINE_Pos) /*!< SCB CTR: DminLine Mask */ + +#define SCB_CTR_IMINLINE_Pos 0U /*!< SCB CTR: ImInLine Position */ +#define SCB_CTR_IMINLINE_Msk (0xFUL /*<< SCB_CTR_IMINLINE_Pos*/) /*!< SCB CTR: ImInLine Mask */ + +/* SCB Cache Size ID Register Definitions */ +#define SCB_CCSIDR_WT_Pos 31U /*!< SCB CCSIDR: WT Position */ +#define SCB_CCSIDR_WT_Msk (1UL << SCB_CCSIDR_WT_Pos) /*!< SCB CCSIDR: WT Mask */ + +#define SCB_CCSIDR_WB_Pos 30U /*!< SCB CCSIDR: WB Position */ +#define SCB_CCSIDR_WB_Msk (1UL << SCB_CCSIDR_WB_Pos) /*!< SCB CCSIDR: WB Mask */ + +#define SCB_CCSIDR_RA_Pos 29U /*!< SCB CCSIDR: RA Position */ +#define SCB_CCSIDR_RA_Msk (1UL << SCB_CCSIDR_RA_Pos) /*!< SCB CCSIDR: RA Mask */ + +#define SCB_CCSIDR_WA_Pos 28U /*!< SCB CCSIDR: WA Position */ +#define SCB_CCSIDR_WA_Msk (1UL << SCB_CCSIDR_WA_Pos) /*!< SCB CCSIDR: WA Mask */ + +#define SCB_CCSIDR_NUMSETS_Pos 13U /*!< SCB CCSIDR: NumSets Position */ +#define SCB_CCSIDR_NUMSETS_Msk (0x7FFFUL << SCB_CCSIDR_NUMSETS_Pos) /*!< SCB CCSIDR: NumSets Mask */ + +#define SCB_CCSIDR_ASSOCIATIVITY_Pos 3U /*!< SCB CCSIDR: Associativity Position */ +#define SCB_CCSIDR_ASSOCIATIVITY_Msk (0x3FFUL << SCB_CCSIDR_ASSOCIATIVITY_Pos) /*!< SCB CCSIDR: Associativity Mask */ + +#define SCB_CCSIDR_LINESIZE_Pos 0U /*!< SCB CCSIDR: LineSize Position */ +#define SCB_CCSIDR_LINESIZE_Msk (7UL /*<< SCB_CCSIDR_LINESIZE_Pos*/) /*!< SCB CCSIDR: LineSize Mask */ + +/* SCB Cache Size Selection Register Definitions */ +#define SCB_CSSELR_LEVEL_Pos 1U /*!< SCB CSSELR: Level Position */ +#define SCB_CSSELR_LEVEL_Msk (7UL << SCB_CSSELR_LEVEL_Pos) /*!< SCB CSSELR: Level Mask */ + +#define SCB_CSSELR_IND_Pos 0U /*!< SCB CSSELR: InD Position */ +#define SCB_CSSELR_IND_Msk (1UL /*<< SCB_CSSELR_IND_Pos*/) /*!< SCB CSSELR: InD Mask */ + +/* SCB Software Triggered Interrupt Register Definitions */ +#define SCB_STIR_INTID_Pos 0U /*!< SCB STIR: INTID Position */ +#define SCB_STIR_INTID_Msk (0x1FFUL /*<< SCB_STIR_INTID_Pos*/) /*!< SCB STIR: INTID Mask */ + +/* SCB D-Cache Invalidate by Set-way Register Definitions */ +#define SCB_DCISW_WAY_Pos 30U /*!< SCB DCISW: Way Position */ +#define SCB_DCISW_WAY_Msk (3UL << SCB_DCISW_WAY_Pos) /*!< SCB DCISW: Way Mask */ + +#define SCB_DCISW_SET_Pos 5U /*!< SCB DCISW: Set Position */ +#define SCB_DCISW_SET_Msk (0x1FFUL << SCB_DCISW_SET_Pos) /*!< SCB DCISW: Set Mask */ + +/* SCB D-Cache Clean by Set-way Register Definitions */ +#define SCB_DCCSW_WAY_Pos 30U /*!< SCB DCCSW: Way Position */ +#define SCB_DCCSW_WAY_Msk (3UL << SCB_DCCSW_WAY_Pos) /*!< SCB DCCSW: Way Mask */ + +#define SCB_DCCSW_SET_Pos 5U /*!< SCB DCCSW: Set Position */ +#define SCB_DCCSW_SET_Msk (0x1FFUL << SCB_DCCSW_SET_Pos) /*!< SCB DCCSW: Set Mask */ + +/* SCB D-Cache Clean and Invalidate by Set-way Register Definitions */ +#define SCB_DCCISW_WAY_Pos 30U /*!< SCB DCCISW: Way Position */ +#define SCB_DCCISW_WAY_Msk (3UL << SCB_DCCISW_WAY_Pos) /*!< SCB DCCISW: Way Mask */ + +#define SCB_DCCISW_SET_Pos 5U /*!< SCB DCCISW: Set Position */ +#define SCB_DCCISW_SET_Msk (0x1FFUL << SCB_DCCISW_SET_Pos) /*!< SCB DCCISW: Set Mask */ + +/* Instruction Tightly-Coupled Memory Control Register Definitions */ +#define SCB_ITCMCR_SZ_Pos 3U /*!< SCB ITCMCR: SZ Position */ +#define SCB_ITCMCR_SZ_Msk (0xFUL << SCB_ITCMCR_SZ_Pos) /*!< SCB ITCMCR: SZ Mask */ + +#define SCB_ITCMCR_RETEN_Pos 2U /*!< SCB ITCMCR: RETEN Position */ +#define SCB_ITCMCR_RETEN_Msk (1UL << SCB_ITCMCR_RETEN_Pos) /*!< SCB ITCMCR: RETEN Mask */ + +#define SCB_ITCMCR_RMW_Pos 1U /*!< SCB ITCMCR: RMW Position */ +#define SCB_ITCMCR_RMW_Msk (1UL << SCB_ITCMCR_RMW_Pos) /*!< SCB ITCMCR: RMW Mask */ + +#define SCB_ITCMCR_EN_Pos 0U /*!< SCB ITCMCR: EN Position */ +#define SCB_ITCMCR_EN_Msk (1UL /*<< SCB_ITCMCR_EN_Pos*/) /*!< SCB ITCMCR: EN Mask */ + +/* Data Tightly-Coupled Memory Control Register Definitions */ +#define SCB_DTCMCR_SZ_Pos 3U /*!< SCB DTCMCR: SZ Position */ +#define SCB_DTCMCR_SZ_Msk (0xFUL << SCB_DTCMCR_SZ_Pos) /*!< SCB DTCMCR: SZ Mask */ + +#define SCB_DTCMCR_RETEN_Pos 2U /*!< SCB DTCMCR: RETEN Position */ +#define SCB_DTCMCR_RETEN_Msk (1UL << SCB_DTCMCR_RETEN_Pos) /*!< SCB DTCMCR: RETEN Mask */ + +#define SCB_DTCMCR_RMW_Pos 1U /*!< SCB DTCMCR: RMW Position */ +#define SCB_DTCMCR_RMW_Msk (1UL << SCB_DTCMCR_RMW_Pos) /*!< SCB DTCMCR: RMW Mask */ + +#define SCB_DTCMCR_EN_Pos 0U /*!< SCB DTCMCR: EN Position */ +#define SCB_DTCMCR_EN_Msk (1UL /*<< SCB_DTCMCR_EN_Pos*/) /*!< SCB DTCMCR: EN Mask */ + +/* AHBP Control Register Definitions */ +#define SCB_AHBPCR_SZ_Pos 1U /*!< SCB AHBPCR: SZ Position */ +#define SCB_AHBPCR_SZ_Msk (7UL << SCB_AHBPCR_SZ_Pos) /*!< SCB AHBPCR: SZ Mask */ + +#define SCB_AHBPCR_EN_Pos 0U /*!< SCB AHBPCR: EN Position */ +#define SCB_AHBPCR_EN_Msk (1UL /*<< SCB_AHBPCR_EN_Pos*/) /*!< SCB AHBPCR: EN Mask */ + +/* L1 Cache Control Register Definitions */ +#define SCB_CACR_FORCEWT_Pos 2U /*!< SCB CACR: FORCEWT Position */ +#define SCB_CACR_FORCEWT_Msk (1UL << SCB_CACR_FORCEWT_Pos) /*!< SCB CACR: FORCEWT Mask */ + +#define SCB_CACR_ECCEN_Pos 1U /*!< SCB CACR: ECCEN Position */ +#define SCB_CACR_ECCEN_Msk (1UL << SCB_CACR_ECCEN_Pos) /*!< SCB CACR: ECCEN Mask */ + +#define SCB_CACR_SIWT_Pos 0U /*!< SCB CACR: SIWT Position */ +#define SCB_CACR_SIWT_Msk (1UL /*<< SCB_CACR_SIWT_Pos*/) /*!< SCB CACR: SIWT Mask */ + +/* AHBS Control Register Definitions */ +#define SCB_AHBSCR_INITCOUNT_Pos 11U /*!< SCB AHBSCR: INITCOUNT Position */ +#define SCB_AHBSCR_INITCOUNT_Msk (0x1FUL << SCB_AHBPCR_INITCOUNT_Pos) /*!< SCB AHBSCR: INITCOUNT Mask */ + +#define SCB_AHBSCR_TPRI_Pos 2U /*!< SCB AHBSCR: TPRI Position */ +#define SCB_AHBSCR_TPRI_Msk (0x1FFUL << SCB_AHBPCR_TPRI_Pos) /*!< SCB AHBSCR: TPRI Mask */ + +#define SCB_AHBSCR_CTL_Pos 0U /*!< SCB AHBSCR: CTL Position*/ +#define SCB_AHBSCR_CTL_Msk (3UL /*<< SCB_AHBPCR_CTL_Pos*/) /*!< SCB AHBSCR: CTL Mask */ + +/* Auxiliary Bus Fault Status Register Definitions */ +#define SCB_ABFSR_AXIMTYPE_Pos 8U /*!< SCB ABFSR: AXIMTYPE Position*/ +#define SCB_ABFSR_AXIMTYPE_Msk (3UL << SCB_ABFSR_AXIMTYPE_Pos) /*!< SCB ABFSR: AXIMTYPE Mask */ + +#define SCB_ABFSR_EPPB_Pos 4U /*!< SCB ABFSR: EPPB Position*/ +#define SCB_ABFSR_EPPB_Msk (1UL << SCB_ABFSR_EPPB_Pos) /*!< SCB ABFSR: EPPB Mask */ + +#define SCB_ABFSR_AXIM_Pos 3U /*!< SCB ABFSR: AXIM Position*/ +#define SCB_ABFSR_AXIM_Msk (1UL << SCB_ABFSR_AXIM_Pos) /*!< SCB ABFSR: AXIM Mask */ + +#define SCB_ABFSR_AHBP_Pos 2U /*!< SCB ABFSR: AHBP Position*/ +#define SCB_ABFSR_AHBP_Msk (1UL << SCB_ABFSR_AHBP_Pos) /*!< SCB ABFSR: AHBP Mask */ + +#define SCB_ABFSR_DTCM_Pos 1U /*!< SCB ABFSR: DTCM Position*/ +#define SCB_ABFSR_DTCM_Msk (1UL << SCB_ABFSR_DTCM_Pos) /*!< SCB ABFSR: DTCM Mask */ + +#define SCB_ABFSR_ITCM_Pos 0U /*!< SCB ABFSR: ITCM Position*/ +#define SCB_ABFSR_ITCM_Msk (1UL /*<< SCB_ABFSR_ITCM_Pos*/) /*!< SCB ABFSR: ITCM Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ +} SCnSCB_Type; + +/* Interrupt Controller Type Register Definitions */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ + +/* Auxiliary Control Register Definitions */ +#define SCnSCB_ACTLR_DISITMATBFLUSH_Pos 12U /*!< ACTLR: DISITMATBFLUSH Position */ +#define SCnSCB_ACTLR_DISITMATBFLUSH_Msk (1UL << SCnSCB_ACTLR_DISITMATBFLUSH_Pos) /*!< ACTLR: DISITMATBFLUSH Mask */ + +#define SCnSCB_ACTLR_DISRAMODE_Pos 11U /*!< ACTLR: DISRAMODE Position */ +#define SCnSCB_ACTLR_DISRAMODE_Msk (1UL << SCnSCB_ACTLR_DISRAMODE_Pos) /*!< ACTLR: DISRAMODE Mask */ + +#define SCnSCB_ACTLR_FPEXCODIS_Pos 10U /*!< ACTLR: FPEXCODIS Position */ +#define SCnSCB_ACTLR_FPEXCODIS_Msk (1UL << SCnSCB_ACTLR_FPEXCODIS_Pos) /*!< ACTLR: FPEXCODIS Mask */ + +#define SCnSCB_ACTLR_DISFOLD_Pos 2U /*!< ACTLR: DISFOLD Position */ +#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */ + +#define SCnSCB_ACTLR_DISMCYCINT_Pos 0U /*!< ACTLR: DISMCYCINT Position */ +#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/) /*!< ACTLR: DISMCYCINT Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) + \brief Type definitions for the Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** + \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __OM union + { + __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864U]; + __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15U]; + __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15U]; + __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[29U]; + __OM uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */ + __IM uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */ + __IOM uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */ + uint32_t RESERVED4[43U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[6U]; + __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TraceBusID_Pos 16U /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPrescale_Pos 8U /*!< ITM TCR: TSPrescale Position */ +#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */ + +#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Integration Write Register Definitions */ +#define ITM_IWR_ATVALIDM_Pos 0U /*!< ITM IWR: ATVALIDM Position */ +#define ITM_IWR_ATVALIDM_Msk (1UL /*<< ITM_IWR_ATVALIDM_Pos*/) /*!< ITM IWR: ATVALIDM Mask */ + +/* ITM Integration Read Register Definitions */ +#define ITM_IRR_ATREADYM_Pos 0U /*!< ITM IRR: ATREADYM Position */ +#define ITM_IRR_ATREADYM_Msk (1UL /*<< ITM_IRR_ATREADYM_Pos*/) /*!< ITM IRR: ATREADYM Mask */ + +/* ITM Integration Mode Control Register Definitions */ +#define ITM_IMCR_INTEGRATION_Pos 0U /*!< ITM IMCR: INTEGRATION Position */ +#define ITM_IMCR_INTEGRATION_Msk (1UL /*<< ITM_IMCR_INTEGRATION_Pos*/) /*!< ITM IMCR: INTEGRATION Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + __IOM uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */ + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED0[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + __IOM uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */ + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + __IOM uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */ + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + __IOM uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */ + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ + uint32_t RESERVED3[981U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( W) Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R ) Lock Status Register */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ + +#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ + +#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ + +#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ + +#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ + +#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ + +#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ + +#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ + +#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ + +#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ + +#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ + +#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ + +#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ + +/* DWT CPI Count Register Definitions */ +#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ + +/* DWT Exception Overhead Count Register Definitions */ +#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ + +/* DWT Sleep Count Register Definitions */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ + +/* DWT LSU Count Register Definitions */ +#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ + +/* DWT Folded-instruction Count Register Definitions */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ + +/* DWT Comparator Mask Register Definitions */ +#define DWT_MASK_MASK_Pos 0U /*!< DWT MASK: MASK Position */ +#define DWT_MASK_MASK_Msk (0x1FUL /*<< DWT_MASK_MASK_Pos*/) /*!< DWT MASK: MASK Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVADDR1_Pos 16U /*!< DWT FUNCTION: DATAVADDR1 Position */ +#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */ + +#define DWT_FUNCTION_DATAVADDR0_Pos 12U /*!< DWT FUNCTION: DATAVADDR0 Position */ +#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_LNK1ENA_Pos 9U /*!< DWT FUNCTION: LNK1ENA Position */ +#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */ + +#define DWT_FUNCTION_DATAVMATCH_Pos 8U /*!< DWT FUNCTION: DATAVMATCH Position */ +#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */ + +#define DWT_FUNCTION_CYCMATCH_Pos 7U /*!< DWT FUNCTION: CYCMATCH Position */ +#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */ + +#define DWT_FUNCTION_EMITRANGE_Pos 5U /*!< DWT FUNCTION: EMITRANGE Position */ +#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */ + +#define DWT_FUNCTION_FUNCTION_Pos 0U /*!< DWT FUNCTION: FUNCTION Position */ +#define DWT_FUNCTION_FUNCTION_Msk (0xFUL /*<< DWT_FUNCTION_FUNCTION_Pos*/) /*!< DWT FUNCTION: FUNCTION Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IOM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IM uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */ + uint32_t RESERVED3[759U]; + __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER */ + __IM uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */ + __IM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */ + uint32_t RESERVED4[1U]; + __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */ + __IM uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */ + __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ + uint32_t RESERVED5[39U]; + __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ + __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ + uint32_t RESERVED7[8U]; + __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ +#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI TRIGGER Register Definitions */ +#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ +#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ + +/* TPI Integration ETM Data Register Definitions (FIFO0) */ +#define TPI_FIFO0_ITM_ATVALID_Pos 29U /*!< TPI FIFO0: ITM_ATVALID Position */ +#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */ + +#define TPI_FIFO0_ITM_bytecount_Pos 27U /*!< TPI FIFO0: ITM_bytecount Position */ +#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */ + +#define TPI_FIFO0_ETM_ATVALID_Pos 26U /*!< TPI FIFO0: ETM_ATVALID Position */ +#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */ + +#define TPI_FIFO0_ETM_bytecount_Pos 24U /*!< TPI FIFO0: ETM_bytecount Position */ +#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */ + +#define TPI_FIFO0_ETM2_Pos 16U /*!< TPI FIFO0: ETM2 Position */ +#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */ + +#define TPI_FIFO0_ETM1_Pos 8U /*!< TPI FIFO0: ETM1 Position */ +#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */ + +#define TPI_FIFO0_ETM0_Pos 0U /*!< TPI FIFO0: ETM0 Position */ +#define TPI_FIFO0_ETM0_Msk (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/) /*!< TPI FIFO0: ETM0 Mask */ + +/* TPI ITATBCTR2 Register Definitions */ +#define TPI_ITATBCTR2_ATREADY_Pos 0U /*!< TPI ITATBCTR2: ATREADY Position */ +#define TPI_ITATBCTR2_ATREADY_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY_Pos*/) /*!< TPI ITATBCTR2: ATREADY Mask */ + +/* TPI Integration ITM Data Register Definitions (FIFO1) */ +#define TPI_FIFO1_ITM_ATVALID_Pos 29U /*!< TPI FIFO1: ITM_ATVALID Position */ +#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */ + +#define TPI_FIFO1_ITM_bytecount_Pos 27U /*!< TPI FIFO1: ITM_bytecount Position */ +#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */ + +#define TPI_FIFO1_ETM_ATVALID_Pos 26U /*!< TPI FIFO1: ETM_ATVALID Position */ +#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */ + +#define TPI_FIFO1_ETM_bytecount_Pos 24U /*!< TPI FIFO1: ETM_bytecount Position */ +#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */ + +#define TPI_FIFO1_ITM2_Pos 16U /*!< TPI FIFO1: ITM2 Position */ +#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */ + +#define TPI_FIFO1_ITM1_Pos 8U /*!< TPI FIFO1: ITM1 Position */ +#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */ + +#define TPI_FIFO1_ITM0_Pos 0U /*!< TPI FIFO1: ITM0 Position */ +#define TPI_FIFO1_ITM0_Msk (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/) /*!< TPI FIFO1: ITM0 Mask */ + +/* TPI ITATBCTR0 Register Definitions */ +#define TPI_ITATBCTR0_ATREADY_Pos 0U /*!< TPI ITATBCTR0: ATREADY Position */ +#define TPI_ITATBCTR0_ATREADY_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY_Pos*/) /*!< TPI ITATBCTR0: ATREADY Mask */ + +/* TPI Integration Mode Control Register Definitions */ +#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ +#define TPI_ITCTRL_Mode_Msk (0x1UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_MinBufSz_Pos 6U /*!< TPI DEVID: MinBufSz Position */ +#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */ + +#define TPI_DEVID_AsynClkIn_Pos 5U /*!< TPI DEVID: AsynClkIn Position */ +#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */ + +#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ +#define TPI_DEVID_NrTraceInput_Msk (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_MajorType_Pos 4U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +#define TPI_DEVTYPE_SubType_Pos 0U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ + __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */ + __IOM uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */ + __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */ + __IOM uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */ + __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */ + __IOM uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */ +} MPU_Type; + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_ADDR_Pos 5U /*!< MPU RBAR: ADDR Position */ +#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ + +#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */ +#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ + +#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */ +#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */ + +/* MPU Region Attribute and Size Register Definitions */ +#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */ +#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ + +#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */ +#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ + +#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */ +#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ + +#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */ +#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ + +#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */ +#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ + +#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */ +#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ + +#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */ +#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ + +#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */ +#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ + +#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */ +#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ + +#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */ +#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +#if (__FPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_FPU Floating Point Unit (FPU) + \brief Type definitions for the Floating Point Unit (FPU) + @{ + */ + +/** + \brief Structure type to access the Floating Point Unit (FPU). + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IOM uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */ + __IOM uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */ + __IOM uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */ + __IM uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */ + __IM uint32_t MVFR2; /*!< Offset: 0x018 (R/ ) Media and FP Feature Register 2 */ +} FPU_Type; + +/* Floating-Point Context Control Register Definitions */ +#define FPU_FPCCR_ASPEN_Pos 31U /*!< FPCCR: ASPEN bit Position */ +#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */ + +#define FPU_FPCCR_LSPEN_Pos 30U /*!< FPCCR: LSPEN Position */ +#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */ + +#define FPU_FPCCR_MONRDY_Pos 8U /*!< FPCCR: MONRDY Position */ +#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */ + +#define FPU_FPCCR_BFRDY_Pos 6U /*!< FPCCR: BFRDY Position */ +#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */ + +#define FPU_FPCCR_MMRDY_Pos 5U /*!< FPCCR: MMRDY Position */ +#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */ + +#define FPU_FPCCR_HFRDY_Pos 4U /*!< FPCCR: HFRDY Position */ +#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */ + +#define FPU_FPCCR_THREAD_Pos 3U /*!< FPCCR: processor mode bit Position */ +#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */ + +#define FPU_FPCCR_USER_Pos 1U /*!< FPCCR: privilege level bit Position */ +#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */ + +#define FPU_FPCCR_LSPACT_Pos 0U /*!< FPCCR: Lazy state preservation active bit Position */ +#define FPU_FPCCR_LSPACT_Msk (1UL /*<< FPU_FPCCR_LSPACT_Pos*/) /*!< FPCCR: Lazy state preservation active bit Mask */ + +/* Floating-Point Context Address Register Definitions */ +#define FPU_FPCAR_ADDRESS_Pos 3U /*!< FPCAR: ADDRESS bit Position */ +#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */ + +/* Floating-Point Default Status Control Register Definitions */ +#define FPU_FPDSCR_AHP_Pos 26U /*!< FPDSCR: AHP bit Position */ +#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */ + +#define FPU_FPDSCR_DN_Pos 25U /*!< FPDSCR: DN bit Position */ +#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */ + +#define FPU_FPDSCR_FZ_Pos 24U /*!< FPDSCR: FZ bit Position */ +#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */ + +#define FPU_FPDSCR_RMode_Pos 22U /*!< FPDSCR: RMode bit Position */ +#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */ + +/* Media and FP Feature Register 0 Definitions */ +#define FPU_MVFR0_FP_rounding_modes_Pos 28U /*!< MVFR0: FP rounding modes bits Position */ +#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */ + +#define FPU_MVFR0_Short_vectors_Pos 24U /*!< MVFR0: Short vectors bits Position */ +#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */ + +#define FPU_MVFR0_Square_root_Pos 20U /*!< MVFR0: Square root bits Position */ +#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */ + +#define FPU_MVFR0_Divide_Pos 16U /*!< MVFR0: Divide bits Position */ +#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */ + +#define FPU_MVFR0_FP_excep_trapping_Pos 12U /*!< MVFR0: FP exception trapping bits Position */ +#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */ + +#define FPU_MVFR0_Double_precision_Pos 8U /*!< MVFR0: Double-precision bits Position */ +#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */ + +#define FPU_MVFR0_Single_precision_Pos 4U /*!< MVFR0: Single-precision bits Position */ +#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */ + +#define FPU_MVFR0_A_SIMD_registers_Pos 0U /*!< MVFR0: A_SIMD registers bits Position */ +#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL /*<< FPU_MVFR0_A_SIMD_registers_Pos*/) /*!< MVFR0: A_SIMD registers bits Mask */ + +/* Media and FP Feature Register 1 Definitions */ +#define FPU_MVFR1_FP_fused_MAC_Pos 28U /*!< MVFR1: FP fused MAC bits Position */ +#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */ + +#define FPU_MVFR1_FP_HPFP_Pos 24U /*!< MVFR1: FP HPFP bits Position */ +#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */ + +#define FPU_MVFR1_D_NaN_mode_Pos 4U /*!< MVFR1: D_NaN mode bits Position */ +#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */ + +#define FPU_MVFR1_FtZ_mode_Pos 0U /*!< MVFR1: FtZ mode bits Position */ +#define FPU_MVFR1_FtZ_mode_Msk (0xFUL /*<< FPU_MVFR1_FtZ_mode_Pos*/) /*!< MVFR1: FtZ mode bits Mask */ + +/* Media and FP Feature Register 2 Definitions */ + +/*@} end of group CMSIS_FPU */ +#endif + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register Definitions */ +#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) ((value << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) ((value & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Cortex-M4 Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ +#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ +#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ +#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ +#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ +#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ +#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ +#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */ + +#if (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ +#endif + +#if (__FPU_PRESENT == 1U) + #define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */ + #define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */ +#endif + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +/** + \brief Set Priority Grouping + \details Sets the priority grouping field using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << 8U) ); /* Insert write key and priorty group */ + SCB->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping + \details Reads the priority grouping field from the NVIC Interrupt Controller. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t NVIC_GetPriorityGrouping(void) +{ + return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable External Interrupt + \details Enables a device-specific interrupt in the NVIC interrupt controller. + \param [in] IRQn External interrupt number. Value cannot be negative. + */ +__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn) +{ + NVIC->ISER[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL)); +} + + +/** + \brief Disable External Interrupt + \details Disables a device-specific interrupt in the NVIC interrupt controller. + \param [in] IRQn External interrupt number. Value cannot be negative. + */ +__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn) +{ + NVIC->ICER[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL)); +} + + +/** + \brief Get Pending Interrupt + \details Reads the pending register in the NVIC and returns the pending bit for the specified interrupt. + \param [in] IRQn Interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + */ +__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + return((uint32_t)(((NVIC->ISPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of an external interrupt. + \param [in] IRQn Interrupt number. Value cannot be negative. + */ +__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + NVIC->ISPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL)); +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of an external interrupt. + \param [in] IRQn External interrupt number. Value cannot be negative. + */ +__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + NVIC->ICPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL)); +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in NVIC and returns the active bit. + \param [in] IRQn Interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + */ +__STATIC_INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn) +{ + return((uint32_t)(((NVIC->IABR[(((uint32_t)(int32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); +} + + +/** + \brief Set Interrupt Priority + \details Sets the priority of an interrupt. + \note The priority cannot be set for every core interrupt. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + */ +__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) < 0) + { + SCB->SHPR[(((uint32_t)(int32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + NVIC->IP[((uint32_t)(int32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of an interrupt. + The interrupt number can be positive to specify an external (device specific) interrupt, + or negative to specify an internal (core) interrupt. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) < 0) + { + return(((uint32_t)SCB->SHPR[(((uint32_t)(int32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)NVIC->IP[((uint32_t)(int32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__STATIC_INLINE void NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +/*@} end of CMSIS_Core_NVICFunctions */ + + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + uint32_t mvfr0; + + mvfr0 = SCB->MVFR0; + if ((mvfr0 & 0x00000FF0UL) == 0x220UL) + { + return 2UL; /* Double + Single precision FPU */ + } + else if ((mvfr0 & 0x00000FF0UL) == 0x020UL) + { + return 1UL; /* Single precision FPU */ + } + else + { + return 0UL; /* No FPU */ + } +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ########################## Cache functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_CacheFunctions Cache Functions + \brief Functions that configure Instruction and Data cache. + @{ + */ + +/* Cache Size ID Register Macros */ +#define CCSIDR_WAYS(x) (((x) & SCB_CCSIDR_ASSOCIATIVITY_Msk) >> SCB_CCSIDR_ASSOCIATIVITY_Pos) +#define CCSIDR_SETS(x) (((x) & SCB_CCSIDR_NUMSETS_Msk ) >> SCB_CCSIDR_NUMSETS_Pos ) + + +/** + \brief Enable I-Cache + \details Turns on I-Cache + */ +__STATIC_INLINE void SCB_EnableICache (void) +{ + #if (__ICACHE_PRESENT == 1U) + __DSB(); + __ISB(); + SCB->ICIALLU = 0UL; /* invalidate I-Cache */ + SCB->CCR |= (uint32_t)SCB_CCR_IC_Msk; /* enable I-Cache */ + __DSB(); + __ISB(); + #endif +} + + +/** + \brief Disable I-Cache + \details Turns off I-Cache + */ +__STATIC_INLINE void SCB_DisableICache (void) +{ + #if (__ICACHE_PRESENT == 1U) + __DSB(); + __ISB(); + SCB->CCR &= ~(uint32_t)SCB_CCR_IC_Msk; /* disable I-Cache */ + SCB->ICIALLU = 0UL; /* invalidate I-Cache */ + __DSB(); + __ISB(); + #endif +} + + +/** + \brief Invalidate I-Cache + \details Invalidates I-Cache + */ +__STATIC_INLINE void SCB_InvalidateICache (void) +{ + #if (__ICACHE_PRESENT == 1U) + __DSB(); + __ISB(); + SCB->ICIALLU = 0UL; + __DSB(); + __ISB(); + #endif +} + + +/** + \brief Enable D-Cache + \details Turns on D-Cache + */ +__STATIC_INLINE void SCB_EnableDCache (void) +{ + #if (__DCACHE_PRESENT == 1U) + uint32_t ccsidr; + uint32_t sets; + uint32_t ways; + + SCB->CSSELR = (0U << 1U) | 0U; /* Level 1 data cache */ + __DSB(); + + ccsidr = SCB->CCSIDR; + + /* invalidate D-Cache */ + sets = (uint32_t)(CCSIDR_SETS(ccsidr)); + do { + ways = (uint32_t)(CCSIDR_WAYS(ccsidr)); + do { + SCB->DCISW = (((sets << SCB_DCISW_SET_Pos) & SCB_DCISW_SET_Msk) | + ((ways << SCB_DCISW_WAY_Pos) & SCB_DCISW_WAY_Msk) ); + #if defined ( __CC_ARM ) + __schedule_barrier(); + #endif + } while (ways--); + } while(sets--); + __DSB(); + + SCB->CCR |= (uint32_t)SCB_CCR_DC_Msk; /* enable D-Cache */ + + __DSB(); + __ISB(); + #endif +} + + +/** + \brief Disable D-Cache + \details Turns off D-Cache + */ +__STATIC_INLINE void SCB_DisableDCache (void) +{ + #if (__DCACHE_PRESENT == 1U) + uint32_t ccsidr; + uint32_t sets; + uint32_t ways; + + SCB->CSSELR = (0U << 1U) | 0U; /* Level 1 data cache */ + __DSB(); + + ccsidr = SCB->CCSIDR; + + SCB->CCR &= ~(uint32_t)SCB_CCR_DC_Msk; /* disable D-Cache */ + + /* clean & invalidate D-Cache */ + sets = (uint32_t)(CCSIDR_SETS(ccsidr)); + do { + ways = (uint32_t)(CCSIDR_WAYS(ccsidr)); + do { + SCB->DCCISW = (((sets << SCB_DCCISW_SET_Pos) & SCB_DCCISW_SET_Msk) | + ((ways << SCB_DCCISW_WAY_Pos) & SCB_DCCISW_WAY_Msk) ); + #if defined ( __CC_ARM ) + __schedule_barrier(); + #endif + } while (ways--); + } while(sets--); + + __DSB(); + __ISB(); + #endif +} + + +/** + \brief Invalidate D-Cache + \details Invalidates D-Cache + */ +__STATIC_INLINE void SCB_InvalidateDCache (void) +{ + #if (__DCACHE_PRESENT == 1U) + uint32_t ccsidr; + uint32_t sets; + uint32_t ways; + + SCB->CSSELR = (0U << 1U) | 0U; /* Level 1 data cache */ + __DSB(); + + ccsidr = SCB->CCSIDR; + + /* invalidate D-Cache */ + sets = (uint32_t)(CCSIDR_SETS(ccsidr)); + do { + ways = (uint32_t)(CCSIDR_WAYS(ccsidr)); + do { + SCB->DCISW = (((sets << SCB_DCISW_SET_Pos) & SCB_DCISW_SET_Msk) | + ((ways << SCB_DCISW_WAY_Pos) & SCB_DCISW_WAY_Msk) ); + #if defined ( __CC_ARM ) + __schedule_barrier(); + #endif + } while (ways--); + } while(sets--); + + __DSB(); + __ISB(); + #endif +} + + +/** + \brief Clean D-Cache + \details Cleans D-Cache + */ +__STATIC_INLINE void SCB_CleanDCache (void) +{ + #if (__DCACHE_PRESENT == 1U) + uint32_t ccsidr; + uint32_t sets; + uint32_t ways; + + SCB->CSSELR = (0U << 1U) | 0U; /* Level 1 data cache */ + __DSB(); + + ccsidr = SCB->CCSIDR; + + /* clean D-Cache */ + sets = (uint32_t)(CCSIDR_SETS(ccsidr)); + do { + ways = (uint32_t)(CCSIDR_WAYS(ccsidr)); + do { + SCB->DCCSW = (((sets << SCB_DCCSW_SET_Pos) & SCB_DCCSW_SET_Msk) | + ((ways << SCB_DCCSW_WAY_Pos) & SCB_DCCSW_WAY_Msk) ); + #if defined ( __CC_ARM ) + __schedule_barrier(); + #endif + } while (ways--); + } while(sets--); + + __DSB(); + __ISB(); + #endif +} + + +/** + \brief Clean & Invalidate D-Cache + \details Cleans and Invalidates D-Cache + */ +__STATIC_INLINE void SCB_CleanInvalidateDCache (void) +{ + #if (__DCACHE_PRESENT == 1U) + uint32_t ccsidr; + uint32_t sets; + uint32_t ways; + + SCB->CSSELR = (0U << 1U) | 0U; /* Level 1 data cache */ + __DSB(); + + ccsidr = SCB->CCSIDR; + + /* clean & invalidate D-Cache */ + sets = (uint32_t)(CCSIDR_SETS(ccsidr)); + do { + ways = (uint32_t)(CCSIDR_WAYS(ccsidr)); + do { + SCB->DCCISW = (((sets << SCB_DCCISW_SET_Pos) & SCB_DCCISW_SET_Msk) | + ((ways << SCB_DCCISW_WAY_Pos) & SCB_DCCISW_WAY_Msk) ); + #if defined ( __CC_ARM ) + __schedule_barrier(); + #endif + } while (ways--); + } while(sets--); + + __DSB(); + __ISB(); + #endif +} + + +/** + \brief D-Cache Invalidate by address + \details Invalidates D-Cache for the given address + \param[in] addr address (aligned to 32-byte boundary) + \param[in] dsize size of memory block (in number of bytes) +*/ +__STATIC_INLINE void SCB_InvalidateDCache_by_Addr (uint32_t *addr, int32_t dsize) +{ + #if (__DCACHE_PRESENT == 1U) + int32_t op_size = dsize; + uint32_t op_addr = (uint32_t)addr; + int32_t linesize = 32U; /* in Cortex-M7 size of cache line is fixed to 8 words (32 bytes) */ + + __DSB(); + + while (op_size > 0) { + SCB->DCIMVAC = op_addr; + op_addr += linesize; + op_size -= linesize; + } + + __DSB(); + __ISB(); + #endif +} + + +/** + \brief D-Cache Clean by address + \details Cleans D-Cache for the given address + \param[in] addr address (aligned to 32-byte boundary) + \param[in] dsize size of memory block (in number of bytes) +*/ +__STATIC_INLINE void SCB_CleanDCache_by_Addr (uint32_t *addr, int32_t dsize) +{ + #if (__DCACHE_PRESENT == 1) + int32_t op_size = dsize; + uint32_t op_addr = (uint32_t) addr; + int32_t linesize = 32U; /* in Cortex-M7 size of cache line is fixed to 8 words (32 bytes) */ + + __DSB(); + + while (op_size > 0) { + SCB->DCCMVAC = op_addr; + op_addr += linesize; + op_size -= linesize; + } + + __DSB(); + __ISB(); + #endif +} + + +/** + \brief D-Cache Clean and Invalidate by address + \details Cleans and invalidates D_Cache for the given address + \param[in] addr address (aligned to 32-byte boundary) + \param[in] dsize size of memory block (in number of bytes) +*/ +__STATIC_INLINE void SCB_CleanInvalidateDCache_by_Addr (uint32_t *addr, int32_t dsize) +{ + #if (__DCACHE_PRESENT == 1U) + int32_t op_size = dsize; + uint32_t op_addr = (uint32_t) addr; + int32_t linesize = 32U; /* in Cortex-M7 size of cache line is fixed to 8 words (32 bytes) */ + + __DSB(); + + while (op_size > 0) { + SCB->DCCIMVAC = op_addr; + op_addr += linesize; + op_size -= linesize; + } + + __DSB(); + __ISB(); + #endif +} + + +/*@} end of CMSIS_Core_CacheFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions ITM Functions + \brief Functions that access the ITM debug interface. + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY 0x5AA55AA5U /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + + +/** + \brief ITM Send Character + \details Transmits a character via the ITM channel 0, and + \li Just returns when no debugger is connected that has booked the output. + \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. + \param [in] ch Character to transmit. + \returns Character to transmit. + */ +__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ + ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0U].u32 == 0UL) + { + __NOP(); + } + ITM->PORT[0U].u8 = (uint8_t)ch; + } + return (ch); +} + + +/** + \brief ITM Receive Character + \details Inputs a character via the external variable \ref ITM_RxBuffer. + \return Received character. + \return -1 No character pending. + */ +__STATIC_INLINE int32_t ITM_ReceiveChar (void) +{ + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) + { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + \brief ITM Check Character + \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. + \return 0 No character available. + \return 1 Character available. + */ +__STATIC_INLINE int32_t ITM_CheckChar (void) +{ + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) + { + return (0); /* no character available */ + } + else + { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM7_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/src/boards/mcu/stm32/cmsis/core_cmFunc.h b/src/boards/mcu/stm32/cmsis/core_cmFunc.h new file mode 100755 index 0000000..ca319a5 --- /dev/null +++ b/src/boards/mcu/stm32/cmsis/core_cmFunc.h @@ -0,0 +1,87 @@ +/**************************************************************************//** + * @file core_cmFunc.h + * @brief CMSIS Cortex-M Core Function Access Header File + * @version V4.30 + * @date 20. October 2015 + ******************************************************************************/ +/* Copyright (c) 2009 - 2015 ARM LIMITED + + All rights reserved. + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are met: + - Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + - Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + - Neither the name of ARM nor the names of its contributors may be used + to endorse or promote products derived from this software without + specific prior written permission. + * + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + POSSIBILITY OF SUCH DAMAGE. + ---------------------------------------------------------------------------*/ + + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_CMFUNC_H +#define __CORE_CMFUNC_H + + +/* ########################### Core Function Access ########################### */ +/** \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions + @{ +*/ + +/*------------------ RealView Compiler -----------------*/ +#if defined ( __CC_ARM ) + #include "cmsis_armcc.h" + +/*------------------ ARM Compiler V6 -------------------*/ +#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #include "cmsis_armcc_V6.h" + +/*------------------ GNU Compiler ----------------------*/ +#elif defined ( __GNUC__ ) + #include "cmsis_gcc.h" + +/*------------------ ICC Compiler ----------------------*/ +#elif defined ( __ICCARM__ ) + #include + +/*------------------ TI CCS Compiler -------------------*/ +#elif defined ( __TMS470__ ) + #include + +/*------------------ TASKING Compiler ------------------*/ +#elif defined ( __TASKING__ ) + /* + * The CMSIS functions have been implemented as intrinsics in the compiler. + * Please use "carm -?i" to get an up to date list of all intrinsics, + * Including the CMSIS ones. + */ + +/*------------------ COSMIC Compiler -------------------*/ +#elif defined ( __CSMC__ ) + #include + +#endif + +/*@} end of CMSIS_Core_RegAccFunctions */ + +#endif /* __CORE_CMFUNC_H */ diff --git a/src/boards/mcu/stm32/cmsis/core_cmInstr.h b/src/boards/mcu/stm32/cmsis/core_cmInstr.h new file mode 100755 index 0000000..a0a5064 --- /dev/null +++ b/src/boards/mcu/stm32/cmsis/core_cmInstr.h @@ -0,0 +1,87 @@ +/**************************************************************************//** + * @file core_cmInstr.h + * @brief CMSIS Cortex-M Core Instruction Access Header File + * @version V4.30 + * @date 20. October 2015 + ******************************************************************************/ +/* Copyright (c) 2009 - 2015 ARM LIMITED + + All rights reserved. + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are met: + - Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + - Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + - Neither the name of ARM nor the names of its contributors may be used + to endorse or promote products derived from this software without + specific prior written permission. + * + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + POSSIBILITY OF SUCH DAMAGE. + ---------------------------------------------------------------------------*/ + + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_CMINSTR_H +#define __CORE_CMINSTR_H + + +/* ########################## Core Instruction Access ######################### */ +/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface + Access to dedicated instructions + @{ +*/ + +/*------------------ RealView Compiler -----------------*/ +#if defined ( __CC_ARM ) + #include "cmsis_armcc.h" + +/*------------------ ARM Compiler V6 -------------------*/ +#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #include "cmsis_armcc_V6.h" + +/*------------------ GNU Compiler ----------------------*/ +#elif defined ( __GNUC__ ) + #include "cmsis_gcc.h" + +/*------------------ ICC Compiler ----------------------*/ +#elif defined ( __ICCARM__ ) + #include + +/*------------------ TI CCS Compiler -------------------*/ +#elif defined ( __TMS470__ ) + #include + +/*------------------ TASKING Compiler ------------------*/ +#elif defined ( __TASKING__ ) + /* + * The CMSIS functions have been implemented as intrinsics in the compiler. + * Please use "carm -?i" to get an up to date list of all intrinsics, + * Including the CMSIS ones. + */ + +/*------------------ COSMIC Compiler -------------------*/ +#elif defined ( __CSMC__ ) + #include + +#endif + +/*@}*/ /* end of group CMSIS_Core_InstructionInterface */ + +#endif /* __CORE_CMINSTR_H */ diff --git a/src/boards/mcu/stm32/cmsis/core_cmSimd.h b/src/boards/mcu/stm32/cmsis/core_cmSimd.h new file mode 100755 index 0000000..4d76bf9 --- /dev/null +++ b/src/boards/mcu/stm32/cmsis/core_cmSimd.h @@ -0,0 +1,96 @@ +/**************************************************************************//** + * @file core_cmSimd.h + * @brief CMSIS Cortex-M SIMD Header File + * @version V4.30 + * @date 20. October 2015 + ******************************************************************************/ +/* Copyright (c) 2009 - 2015 ARM LIMITED + + All rights reserved. + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are met: + - Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + - Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + - Neither the name of ARM nor the names of its contributors may be used + to endorse or promote products derived from this software without + specific prior written permission. + * + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + POSSIBILITY OF SUCH DAMAGE. + ---------------------------------------------------------------------------*/ + + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_CMSIMD_H +#define __CORE_CMSIMD_H + +#ifdef __cplusplus + extern "C" { +#endif + + +/* ################### Compiler specific Intrinsics ########################### */ +/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics + Access to dedicated SIMD instructions + @{ +*/ + +/*------------------ RealView Compiler -----------------*/ +#if defined ( __CC_ARM ) + #include "cmsis_armcc.h" + +/*------------------ ARM Compiler V6 -------------------*/ +#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #include "cmsis_armcc_V6.h" + +/*------------------ GNU Compiler ----------------------*/ +#elif defined ( __GNUC__ ) + #include "cmsis_gcc.h" + +/*------------------ ICC Compiler ----------------------*/ +#elif defined ( __ICCARM__ ) + #include + +/*------------------ TI CCS Compiler -------------------*/ +#elif defined ( __TMS470__ ) + #include + +/*------------------ TASKING Compiler ------------------*/ +#elif defined ( __TASKING__ ) + /* + * The CMSIS functions have been implemented as intrinsics in the compiler. + * Please use "carm -?i" to get an up to date list of all intrinsics, + * Including the CMSIS ones. + */ + +/*------------------ COSMIC Compiler -------------------*/ +#elif defined ( __CSMC__ ) + #include + +#endif + +/*@} end of group CMSIS_SIMD_intrinsics */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CMSIMD_H */ diff --git a/src/boards/mcu/stm32/cmsis/core_sc000.h b/src/boards/mcu/stm32/cmsis/core_sc000.h new file mode 100755 index 0000000..ea16bf3 --- /dev/null +++ b/src/boards/mcu/stm32/cmsis/core_sc000.h @@ -0,0 +1,926 @@ +/**************************************************************************//** + * @file core_sc000.h + * @brief CMSIS SC000 Core Peripheral Access Layer Header File + * @version V4.30 + * @date 20. October 2015 + ******************************************************************************/ +/* Copyright (c) 2009 - 2015 ARM LIMITED + + All rights reserved. + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are met: + - Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + - Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + - Neither the name of ARM nor the names of its contributors may be used + to endorse or promote products derived from this software without + specific prior written permission. + * + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + POSSIBILITY OF SUCH DAMAGE. + ---------------------------------------------------------------------------*/ + + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_SC000_H_GENERIC +#define __CORE_SC000_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup SC000 + @{ + */ + +/* CMSIS SC000 definitions */ +#define __SC000_CMSIS_VERSION_MAIN (0x04U) /*!< [31:16] CMSIS HAL main version */ +#define __SC000_CMSIS_VERSION_SUB (0x1EU) /*!< [15:0] CMSIS HAL sub version */ +#define __SC000_CMSIS_VERSION ((__SC000_CMSIS_VERSION_MAIN << 16U) | \ + __SC000_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */ + +#define __CORTEX_SC (000U) /*!< Cortex secure core */ + + +#if defined ( __CC_ARM ) + #define __ASM __asm /*!< asm keyword for ARM Compiler */ + #define __INLINE __inline /*!< inline keyword for ARM Compiler */ + #define __STATIC_INLINE static __inline + +#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #define __ASM __asm /*!< asm keyword for ARM Compiler */ + #define __INLINE __inline /*!< inline keyword for ARM Compiler */ + #define __STATIC_INLINE static __inline + +#elif defined ( __GNUC__ ) + #define __ASM __asm /*!< asm keyword for GNU Compiler */ + #define __INLINE inline /*!< inline keyword for GNU Compiler */ + #define __STATIC_INLINE static inline + +#elif defined ( __ICCARM__ ) + #define __ASM __asm /*!< asm keyword for IAR Compiler */ + #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */ + #define __STATIC_INLINE static inline + +#elif defined ( __TMS470__ ) + #define __ASM __asm /*!< asm keyword for TI CCS Compiler */ + #define __STATIC_INLINE static inline + +#elif defined ( __TASKING__ ) + #define __ASM __asm /*!< asm keyword for TASKING Compiler */ + #define __INLINE inline /*!< inline keyword for TASKING Compiler */ + #define __STATIC_INLINE static inline + +#elif defined ( __CSMC__ ) + #define __packed + #define __ASM _asm /*!< asm keyword for COSMIC Compiler */ + #define __INLINE inline /*!< inline keyword for COSMIC Compiler. Use -pc99 on compile line */ + #define __STATIC_INLINE static inline + +#else + #error Unknown compiler +#endif + +/** __FPU_USED indicates whether an FPU is used or not. + This core does not support an FPU at all +*/ +#define __FPU_USED 0U + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_PCS_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TMS470__ ) + #if defined __TI_VFP_SUPPORT__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#endif + +#include "core_cmInstr.h" /* Core Instruction Access */ +#include "core_cmFunc.h" /* Core Function Access */ + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_SC000_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_SC000_H_DEPENDANT +#define __CORE_SC000_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __SC000_REV + #define __SC000_REV 0x0000U + #warning "__SC000_REV not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 2U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group SC000 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core MPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t _reserved0:1; /*!< bit: 0 Reserved */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[1U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[31U]; + __IOM uint32_t ICER[1U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[31U]; + __IOM uint32_t ISPR[1U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[31U]; + __IOM uint32_t ICPR[1U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[31U]; + uint32_t RESERVED4[64U]; + __IOM uint32_t IP[8U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */ +} NVIC_Type; + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + uint32_t RESERVED0[1U]; + __IOM uint32_t SHP[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + uint32_t RESERVED1[154U]; + __IOM uint32_t SFCR; /*!< Offset: 0x290 (R/W) Security Features Control Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ +} SCnSCB_Type; + +/* Auxiliary Control Register Definitions */ +#define SCnSCB_ACTLR_DISMCYCINT_Pos 0U /*!< ACTLR: DISMCYCINT Position */ +#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/) /*!< ACTLR: DISMCYCINT Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + +#if (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ +} MPU_Type; + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_ADDR_Pos 8U /*!< MPU RBAR: ADDR Position */ +#define MPU_RBAR_ADDR_Msk (0xFFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ + +#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */ +#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ + +#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */ +#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */ + +/* MPU Region Attribute and Size Register Definitions */ +#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */ +#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ + +#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */ +#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ + +#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */ +#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ + +#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */ +#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ + +#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */ +#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ + +#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */ +#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ + +#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */ +#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ + +#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */ +#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ + +#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */ +#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ + +#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */ +#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief SC000 Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor. + Therefore they are not covered by the SC000 header file. + @{ + */ +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) ((value << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) ((value & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of SC000 Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + +#if (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ +#endif + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +/* Interrupt Priorities are WORD accessible only under ARMv6M */ +/* The following MACROS handle generation of the register offset and byte masks */ +#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL) +#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) ) +#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) ) + + +/** + \brief Enable External Interrupt + \details Enables a device-specific interrupt in the NVIC interrupt controller. + \param [in] IRQn External interrupt number. Value cannot be negative. + */ +__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn) +{ + NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL)); +} + + +/** + \brief Disable External Interrupt + \details Disables a device-specific interrupt in the NVIC interrupt controller. + \param [in] IRQn External interrupt number. Value cannot be negative. + */ +__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn) +{ + NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL)); +} + + +/** + \brief Get Pending Interrupt + \details Reads the pending register in the NVIC and returns the pending bit for the specified interrupt. + \param [in] IRQn Interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + */ +__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of an external interrupt. + \param [in] IRQn Interrupt number. Value cannot be negative. + */ +__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL)); +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of an external interrupt. + \param [in] IRQn External interrupt number. Value cannot be negative. + */ +__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL)); +} + + +/** + \brief Set Interrupt Priority + \details Sets the priority of an interrupt. + \note The priority cannot be set for every core interrupt. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + */ +__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) < 0) + { + SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } + else + { + NVIC->IP[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of an interrupt. + The interrupt number can be positive to specify an external (device specific) interrupt, + or negative to specify an internal (core) interrupt. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) < 0) + { + return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__STATIC_INLINE void NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + SCB_AIRCR_SYSRESETREQ_Msk); + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +/*@} end of CMSIS_Core_NVICFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_SC000_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/src/boards/mcu/stm32/cmsis/core_sc300.h b/src/boards/mcu/stm32/cmsis/core_sc300.h new file mode 100755 index 0000000..820cef4 --- /dev/null +++ b/src/boards/mcu/stm32/cmsis/core_sc300.h @@ -0,0 +1,1745 @@ +/**************************************************************************//** + * @file core_sc300.h + * @brief CMSIS SC300 Core Peripheral Access Layer Header File + * @version V4.30 + * @date 20. October 2015 + ******************************************************************************/ +/* Copyright (c) 2009 - 2015 ARM LIMITED + + All rights reserved. + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are met: + - Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + - Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + - Neither the name of ARM nor the names of its contributors may be used + to endorse or promote products derived from this software without + specific prior written permission. + * + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + POSSIBILITY OF SUCH DAMAGE. + ---------------------------------------------------------------------------*/ + + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_SC300_H_GENERIC +#define __CORE_SC300_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup SC3000 + @{ + */ + +/* CMSIS SC300 definitions */ +#define __SC300_CMSIS_VERSION_MAIN (0x04U) /*!< [31:16] CMSIS HAL main version */ +#define __SC300_CMSIS_VERSION_SUB (0x1EU) /*!< [15:0] CMSIS HAL sub version */ +#define __SC300_CMSIS_VERSION ((__SC300_CMSIS_VERSION_MAIN << 16U) | \ + __SC300_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */ + +#define __CORTEX_SC (300U) /*!< Cortex secure core */ + + +#if defined ( __CC_ARM ) + #define __ASM __asm /*!< asm keyword for ARM Compiler */ + #define __INLINE __inline /*!< inline keyword for ARM Compiler */ + #define __STATIC_INLINE static __inline + +#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #define __ASM __asm /*!< asm keyword for ARM Compiler */ + #define __INLINE __inline /*!< inline keyword for ARM Compiler */ + #define __STATIC_INLINE static __inline + +#elif defined ( __GNUC__ ) + #define __ASM __asm /*!< asm keyword for GNU Compiler */ + #define __INLINE inline /*!< inline keyword for GNU Compiler */ + #define __STATIC_INLINE static inline + +#elif defined ( __ICCARM__ ) + #define __ASM __asm /*!< asm keyword for IAR Compiler */ + #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */ + #define __STATIC_INLINE static inline + +#elif defined ( __TMS470__ ) + #define __ASM __asm /*!< asm keyword for TI CCS Compiler */ + #define __STATIC_INLINE static inline + +#elif defined ( __TASKING__ ) + #define __ASM __asm /*!< asm keyword for TASKING Compiler */ + #define __INLINE inline /*!< inline keyword for TASKING Compiler */ + #define __STATIC_INLINE static inline + +#elif defined ( __CSMC__ ) + #define __packed + #define __ASM _asm /*!< asm keyword for COSMIC Compiler */ + #define __INLINE inline /*!< inline keyword for COSMIC Compiler. Use -pc99 on compile line */ + #define __STATIC_INLINE static inline + +#else + #error Unknown compiler +#endif + +/** __FPU_USED indicates whether an FPU is used or not. + This core does not support an FPU at all +*/ +#define __FPU_USED 0U + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_PCS_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TMS470__ ) + #if defined __TI_VFP_SUPPORT__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#endif + +#include "core_cmInstr.h" /* Core Instruction Access */ +#include "core_cmFunc.h" /* Core Function Access */ + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_SC300_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_SC300_H_DEPENDANT +#define __CORE_SC300_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __SC300_REV + #define __SC300_REV 0x0000U + #warning "__SC300_REV not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 4U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group SC300 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + +#define APSR_Q_Pos 27U /*!< APSR: Q Position */ +#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ +#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ + +#define xPSR_IT_Pos 25U /*!< xPSR: IT Position */ +#define xPSR_IT_Msk (3UL << xPSR_IT_Pos) /*!< xPSR: IT Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[8U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[24U]; + __IOM uint32_t ICER[8U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[24U]; + __IOM uint32_t ISPR[8U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[24U]; + __IOM uint32_t ICPR[8U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[24U]; + __IOM uint32_t IABR[8U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[56U]; + __IOM uint8_t IP[240U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED5[644U]; + __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IOM uint8_t SHP[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __IM uint32_t PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __IM uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __IM uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __IM uint32_t MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __IM uint32_t ISAR[5U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + uint32_t RESERVED0[5U]; + __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ + uint32_t RESERVED1[129U]; + __IOM uint32_t SFCR; /*!< Offset: 0x290 (R/W) Security Features Control Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLBASE_Pos 29U /*!< SCB VTOR: TBLBASE Position */ +#define SCB_VTOR_TBLBASE_Msk (1UL << SCB_VTOR_TBLBASE_Pos) /*!< SCB VTOR: TBLBASE Mask */ + +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x3FFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +#define SCB_AIRCR_VECTRESET_Pos 0U /*!< SCB AIRCR: VECTRESET Position */ +#define SCB_AIRCR_VECTRESET_Msk (1UL /*<< SCB_AIRCR_VECTRESET_Pos*/) /*!< SCB AIRCR: VECTRESET Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +#define SCB_CCR_NONBASETHRDENA_Pos 0U /*!< SCB CCR: NONBASETHRDENA Position */ +#define SCB_CCR_NONBASETHRDENA_Msk (1UL /*<< SCB_CCR_NONBASETHRDENA_Pos*/) /*!< SCB CCR: NONBASETHRDENA Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Register Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* SCB Hard Fault Status Register Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ + uint32_t RESERVED1[1U]; +} SCnSCB_Type; + +/* Interrupt Controller Type Register Definitions */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) + \brief Type definitions for the Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** + \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __OM union + { + __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864U]; + __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15U]; + __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15U]; + __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[29U]; + __OM uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */ + __IM uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */ + __IOM uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */ + uint32_t RESERVED4[43U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[6U]; + __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TraceBusID_Pos 16U /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPrescale_Pos 8U /*!< ITM TCR: TSPrescale Position */ +#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */ + +#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Integration Write Register Definitions */ +#define ITM_IWR_ATVALIDM_Pos 0U /*!< ITM IWR: ATVALIDM Position */ +#define ITM_IWR_ATVALIDM_Msk (1UL /*<< ITM_IWR_ATVALIDM_Pos*/) /*!< ITM IWR: ATVALIDM Mask */ + +/* ITM Integration Read Register Definitions */ +#define ITM_IRR_ATREADYM_Pos 0U /*!< ITM IRR: ATREADYM Position */ +#define ITM_IRR_ATREADYM_Msk (1UL /*<< ITM_IRR_ATREADYM_Pos*/) /*!< ITM IRR: ATREADYM Mask */ + +/* ITM Integration Mode Control Register Definitions */ +#define ITM_IMCR_INTEGRATION_Pos 0U /*!< ITM IMCR: INTEGRATION Position */ +#define ITM_IMCR_INTEGRATION_Msk (1UL /*<< ITM_IMCR_INTEGRATION_Pos*/) /*!< ITM IMCR: INTEGRATION Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + __IOM uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */ + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED0[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + __IOM uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */ + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + __IOM uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */ + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + __IOM uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */ + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ + +#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ + +#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ + +#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ + +#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ + +#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ + +#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ + +#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ + +#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ + +#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ + +#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ + +#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ + +#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ + +/* DWT CPI Count Register Definitions */ +#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ + +/* DWT Exception Overhead Count Register Definitions */ +#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ + +/* DWT Sleep Count Register Definitions */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ + +/* DWT LSU Count Register Definitions */ +#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ + +/* DWT Folded-instruction Count Register Definitions */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ + +/* DWT Comparator Mask Register Definitions */ +#define DWT_MASK_MASK_Pos 0U /*!< DWT MASK: MASK Position */ +#define DWT_MASK_MASK_Msk (0x1FUL /*<< DWT_MASK_MASK_Pos*/) /*!< DWT MASK: MASK Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVADDR1_Pos 16U /*!< DWT FUNCTION: DATAVADDR1 Position */ +#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */ + +#define DWT_FUNCTION_DATAVADDR0_Pos 12U /*!< DWT FUNCTION: DATAVADDR0 Position */ +#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_LNK1ENA_Pos 9U /*!< DWT FUNCTION: LNK1ENA Position */ +#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */ + +#define DWT_FUNCTION_DATAVMATCH_Pos 8U /*!< DWT FUNCTION: DATAVMATCH Position */ +#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */ + +#define DWT_FUNCTION_CYCMATCH_Pos 7U /*!< DWT FUNCTION: CYCMATCH Position */ +#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */ + +#define DWT_FUNCTION_EMITRANGE_Pos 5U /*!< DWT FUNCTION: EMITRANGE Position */ +#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */ + +#define DWT_FUNCTION_FUNCTION_Pos 0U /*!< DWT FUNCTION: FUNCTION Position */ +#define DWT_FUNCTION_FUNCTION_Msk (0xFUL /*<< DWT_FUNCTION_FUNCTION_Pos*/) /*!< DWT FUNCTION: FUNCTION Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IOM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IM uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */ + uint32_t RESERVED3[759U]; + __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER */ + __IM uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */ + __IM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */ + uint32_t RESERVED4[1U]; + __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */ + __IM uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */ + __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ + uint32_t RESERVED5[39U]; + __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ + __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ + uint32_t RESERVED7[8U]; + __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ +#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI TRIGGER Register Definitions */ +#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ +#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ + +/* TPI Integration ETM Data Register Definitions (FIFO0) */ +#define TPI_FIFO0_ITM_ATVALID_Pos 29U /*!< TPI FIFO0: ITM_ATVALID Position */ +#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */ + +#define TPI_FIFO0_ITM_bytecount_Pos 27U /*!< TPI FIFO0: ITM_bytecount Position */ +#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */ + +#define TPI_FIFO0_ETM_ATVALID_Pos 26U /*!< TPI FIFO0: ETM_ATVALID Position */ +#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */ + +#define TPI_FIFO0_ETM_bytecount_Pos 24U /*!< TPI FIFO0: ETM_bytecount Position */ +#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */ + +#define TPI_FIFO0_ETM2_Pos 16U /*!< TPI FIFO0: ETM2 Position */ +#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */ + +#define TPI_FIFO0_ETM1_Pos 8U /*!< TPI FIFO0: ETM1 Position */ +#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */ + +#define TPI_FIFO0_ETM0_Pos 0U /*!< TPI FIFO0: ETM0 Position */ +#define TPI_FIFO0_ETM0_Msk (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/) /*!< TPI FIFO0: ETM0 Mask */ + +/* TPI ITATBCTR2 Register Definitions */ +#define TPI_ITATBCTR2_ATREADY_Pos 0U /*!< TPI ITATBCTR2: ATREADY Position */ +#define TPI_ITATBCTR2_ATREADY_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY_Pos*/) /*!< TPI ITATBCTR2: ATREADY Mask */ + +/* TPI Integration ITM Data Register Definitions (FIFO1) */ +#define TPI_FIFO1_ITM_ATVALID_Pos 29U /*!< TPI FIFO1: ITM_ATVALID Position */ +#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */ + +#define TPI_FIFO1_ITM_bytecount_Pos 27U /*!< TPI FIFO1: ITM_bytecount Position */ +#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */ + +#define TPI_FIFO1_ETM_ATVALID_Pos 26U /*!< TPI FIFO1: ETM_ATVALID Position */ +#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */ + +#define TPI_FIFO1_ETM_bytecount_Pos 24U /*!< TPI FIFO1: ETM_bytecount Position */ +#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */ + +#define TPI_FIFO1_ITM2_Pos 16U /*!< TPI FIFO1: ITM2 Position */ +#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */ + +#define TPI_FIFO1_ITM1_Pos 8U /*!< TPI FIFO1: ITM1 Position */ +#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */ + +#define TPI_FIFO1_ITM0_Pos 0U /*!< TPI FIFO1: ITM0 Position */ +#define TPI_FIFO1_ITM0_Msk (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/) /*!< TPI FIFO1: ITM0 Mask */ + +/* TPI ITATBCTR0 Register Definitions */ +#define TPI_ITATBCTR0_ATREADY_Pos 0U /*!< TPI ITATBCTR0: ATREADY Position */ +#define TPI_ITATBCTR0_ATREADY_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY_Pos*/) /*!< TPI ITATBCTR0: ATREADY Mask */ + +/* TPI Integration Mode Control Register Definitions */ +#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ +#define TPI_ITCTRL_Mode_Msk (0x1UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_MinBufSz_Pos 6U /*!< TPI DEVID: MinBufSz Position */ +#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */ + +#define TPI_DEVID_AsynClkIn_Pos 5U /*!< TPI DEVID: AsynClkIn Position */ +#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */ + +#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ +#define TPI_DEVID_NrTraceInput_Msk (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_MajorType_Pos 4U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +#define TPI_DEVTYPE_SubType_Pos 0U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ + __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */ + __IOM uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */ + __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */ + __IOM uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */ + __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */ + __IOM uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */ +} MPU_Type; + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_ADDR_Pos 5U /*!< MPU RBAR: ADDR Position */ +#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ + +#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */ +#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ + +#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */ +#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */ + +/* MPU Region Attribute and Size Register Definitions */ +#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */ +#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ + +#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */ +#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ + +#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */ +#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ + +#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */ +#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ + +#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */ +#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ + +#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */ +#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ + +#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */ +#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ + +#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */ +#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ + +#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */ +#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ + +#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */ +#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register Definitions */ +#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) ((value << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) ((value & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Cortex-M3 Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ +#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ +#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ +#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ +#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ +#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ +#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ +#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */ + +#if (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ +#endif + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +/** + \brief Set Priority Grouping + \details Sets the priority grouping field using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << 8U) ); /* Insert write key and priorty group */ + SCB->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping + \details Reads the priority grouping field from the NVIC Interrupt Controller. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t NVIC_GetPriorityGrouping(void) +{ + return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable External Interrupt + \details Enables a device-specific interrupt in the NVIC interrupt controller. + \param [in] IRQn External interrupt number. Value cannot be negative. + */ +__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn) +{ + NVIC->ISER[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL)); +} + + +/** + \brief Disable External Interrupt + \details Disables a device-specific interrupt in the NVIC interrupt controller. + \param [in] IRQn External interrupt number. Value cannot be negative. + */ +__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn) +{ + NVIC->ICER[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL)); +} + + +/** + \brief Get Pending Interrupt + \details Reads the pending register in the NVIC and returns the pending bit for the specified interrupt. + \param [in] IRQn Interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + */ +__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + return((uint32_t)(((NVIC->ISPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of an external interrupt. + \param [in] IRQn Interrupt number. Value cannot be negative. + */ +__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + NVIC->ISPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL)); +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of an external interrupt. + \param [in] IRQn External interrupt number. Value cannot be negative. + */ +__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + NVIC->ICPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL)); +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in NVIC and returns the active bit. + \param [in] IRQn Interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + */ +__STATIC_INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn) +{ + return((uint32_t)(((NVIC->IABR[(((uint32_t)(int32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); +} + + +/** + \brief Set Interrupt Priority + \details Sets the priority of an interrupt. + \note The priority cannot be set for every core interrupt. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + */ +__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) < 0) + { + SCB->SHP[(((uint32_t)(int32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + NVIC->IP[((uint32_t)(int32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of an interrupt. + The interrupt number can be positive to specify an external (device specific) interrupt, + or negative to specify an internal (core) interrupt. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) < 0) + { + return(((uint32_t)SCB->SHP[(((uint32_t)(int32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)NVIC->IP[((uint32_t)(int32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__STATIC_INLINE void NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +/*@} end of CMSIS_Core_NVICFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions ITM Functions + \brief Functions that access the ITM debug interface. + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY 0x5AA55AA5U /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + + +/** + \brief ITM Send Character + \details Transmits a character via the ITM channel 0, and + \li Just returns when no debugger is connected that has booked the output. + \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. + \param [in] ch Character to transmit. + \returns Character to transmit. + */ +__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ + ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0U].u32 == 0UL) + { + __NOP(); + } + ITM->PORT[0U].u8 = (uint8_t)ch; + } + return (ch); +} + + +/** + \brief ITM Receive Character + \details Inputs a character via the external variable \ref ITM_RxBuffer. + \return Received character. + \return -1 No character pending. + */ +__STATIC_INLINE int32_t ITM_ReceiveChar (void) +{ + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) + { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + \brief ITM Check Character + \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. + \return 0 No character available. + \return 1 Character available. + */ +__STATIC_INLINE int32_t ITM_CheckChar (void) +{ + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) + { + return (0); /* no character available */ + } + else + { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_SC300_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/src/boards/mcu/stm32/sysIrqHandlers.c b/src/boards/mcu/stm32/sysIrqHandlers.c new file mode 100755 index 0000000..0b019be --- /dev/null +++ b/src/boards/mcu/stm32/sysIrqHandlers.c @@ -0,0 +1,145 @@ +/* + / _____) _ | | +( (____ _____ ____ _| |_ _____ ____| |__ + \____ \| ___ | (_ _) ___ |/ ___) _ \ + _____) ) ____| | | || |_| ____( (___| | | | +(______/|_____)_|_|_| \__)_____)\____)_| |_| + (C)2013 Semtech + +Description: Default IRQ handlers + +License: Revised BSD License, see LICENSE.TXT file include in the project + +Maintainer: Miguel Luis and Gregory Cristian +*/ +#include "board.h" + +/*! + * \brief This function handles NMI exception. + * \param None + * \retval None + */ +void NMI_Handler( void ) +{ +} + +/*! + * \brief This function handles Hard Fault exception. + * \param None + * \retval None + */ +#if defined( HARD_FAULT_HANDLER_ENABLED ) +void HardFault_Handler_C( unsigned int *args ) +{ + volatile unsigned int stacked_r0; + volatile unsigned int stacked_r1; + volatile unsigned int stacked_r2; + volatile unsigned int stacked_r3; + volatile unsigned int stacked_r12; + volatile unsigned int stacked_lr; + volatile unsigned int stacked_pc; + volatile unsigned int stacked_psr; + + stacked_r0 = ( ( unsigned long) args[0] ); + stacked_r1 = ( ( unsigned long) args[1] ); + stacked_r2 = ( ( unsigned long) args[2] ); + stacked_r3 = ( ( unsigned long) args[3] ); + + stacked_r12 = ( ( unsigned long) args[4] ); + stacked_lr = ( ( unsigned long) args[5] ); + stacked_pc = ( ( unsigned long) args[6] ); + stacked_psr = ( ( unsigned long) args[7] ); + + ( void )stacked_r0; + ( void )stacked_r1; + ( void )stacked_r2; + ( void )stacked_r3; + + ( void )stacked_r12; + ( void )stacked_lr ; + ( void )stacked_pc ; + ( void )stacked_psr; + + while( 1 ); +} + +#if defined(__CC_ARM) +__asm void HardFault_Handler(void) +{ + TST LR, #4 + ITE EQ + MRSEQ r0, MSP + MRSNE r0, PSP + B __cpp(HardFault_Handler_C) +} +#elif defined(__ICCARM__) +void HardFault_Handler(void) +{ + __asm("TST LR, #4"); + __asm("ITE EQ"); + __asm("MRSEQ r0, MSP"); + __asm("MRSNE r0, PSP"); + __asm("B HardFault_Handler_C"); +} +#elif defined(__GNUC__) +void HardFault_Handler(void) +{ + __asm volatile( "TST LR, #4" ); + __asm volatile( "ITE EQ" ); + __asm volatile( "MRSEQ R0, MSP" ); + __asm volatile( "MRSNE R0, PSP" ); + __asm volatile( "B HardFault_Handler_C" ); +} +#else + #warning Not supported compiler type +#endif + +#endif + +/*! + * \brief This function handles Memory Manage exception. + * \param None + * \retval None + */ +void MemManage_Handler( void ) +{ + /* Go to infinite loop when Memory Manage exception occurs */ + while ( 1 ) + { + } +} + +/*! + * \brief This function handles Bus Fault exception. + * \param None + * \retval None + */ +void BusFault_Handler( void ) +{ + /* Go to infinite loop when Bus Fault exception occurs */ + while ( 1 ) + { + } +} + +/*! + * \brief This function handles Usage Fault exception. + * \param None + * \retval None + */ +void UsageFault_Handler( void ) +{ + /* Go to infinite loop when Usage Fault exception occurs */ + while ( 1 ) + { + } +} + +/*! + * \brief This function handles Debug Monitor exception. + * \param None + * \retval None + */ +void DebugMon_Handler( void ) +{ +} diff --git a/src/boards/mcu/stm32/utilities.c b/src/boards/mcu/stm32/utilities.c new file mode 100755 index 0000000..8861235 --- /dev/null +++ b/src/boards/mcu/stm32/utilities.c @@ -0,0 +1,85 @@ +/* + / _____) _ | | +( (____ _____ ____ _| |_ _____ ____| |__ + \____ \| ___ | (_ _) ___ |/ ___) _ \ + _____) ) ____| | | || |_| ____( (___| | | | +(______/|_____)_|_|_| \__)_____)\____)_| |_| + (C)2013 Semtech + +Description: Helper functions implementation + +License: Revised BSD License, see LICENSE.TXT file include in the project + +Maintainer: Miguel Luis and Gregory Cristian +*/ +#include +#include +#include "board.h" +#include "utilities.h" + +/*! + * Redefinition of rand() and srand() standard C functions. + * These functions are redefined in order to get the same behavior across + * different compiler toolchains implementations. + */ +// Standard random functions redefinition start +#define RAND_LOCAL_MAX 2147483647L + +static uint32_t next = 1; + +int32_t rand1( void ) +{ + return ( ( next = next * 1103515245L + 12345L ) % RAND_LOCAL_MAX ); +} + +void srand1( uint32_t seed ) +{ + next = seed; +} +// Standard random functions redefinition end + +int32_t randr( int32_t min, int32_t max ) +{ + return ( int32_t )rand1( ) % ( max - min + 1 ) + min; +} + +void memcpy1( uint8_t *dst, const uint8_t *src, uint16_t size ) +{ + while( size-- ) + { + *dst++ = *src++; + } +} + +void memcpyr( uint8_t *dst, const uint8_t *src, uint16_t size ) +{ + dst = dst + ( size - 1 ); + while( size-- ) + { + *dst-- = *src++; + } +} + +void memset1( uint8_t *dst, uint8_t value, uint16_t size ) +{ + while( size-- ) + { + *dst++ = value; + } +} + +int8_t Nibble2HexChar( uint8_t a ) +{ + if( a < 10 ) + { + return '0' + a; + } + else if( a < 16 ) + { + return 'A' + ( a - 10 ); + } + else + { + return '?'; + } +} diff --git a/src/boards/mcu/stm32/utilities.h b/src/boards/mcu/stm32/utilities.h new file mode 100755 index 0000000..cc5e7e9 --- /dev/null +++ b/src/boards/mcu/stm32/utilities.h @@ -0,0 +1,99 @@ +/* + / _____) _ | | +( (____ _____ ____ _| |_ _____ ____| |__ + \____ \| ___ | (_ _) ___ |/ ___) _ \ + _____) ) ____| | | || |_| ____( (___| | | | +(______/|_____)_|_|_| \__)_____)\____)_| |_| + (C)2013 Semtech + +Description: Helper functions implementation + +License: Revised BSD License, see LICENSE.TXT file include in the project + +Maintainer: Miguel Luis and Gregory Cristian +*/ +#ifndef __UTILITIES_H__ +#define __UTILITIES_H__ + +/*! + * \brief Returns the minimum value between a and b + * + * \param [IN] a 1st value + * \param [IN] b 2nd value + * \retval minValue Minimum value + */ +#define MIN( a, b ) ( ( ( a ) < ( b ) ) ? ( a ) : ( b ) ) + +/*! + * \brief Returns the maximum value between a and b + * + * \param [IN] a 1st value + * \param [IN] b 2nd value + * \retval maxValue Maximum value + */ +#define MAX( a, b ) ( ( ( a ) > ( b ) ) ? ( a ) : ( b ) ) + +/*! + * \brief Returns 2 raised to the power of n + * + * \param [IN] n power value + * \retval result of raising 2 to the power n + */ +#define POW2( n ) ( 1 << n ) + +/*! + * \brief Initializes the pseudo random generator initial value + * + * \param [IN] seed Pseudo random generator initial value + */ +void srand1( uint32_t seed ); + +/*! + * \brief Computes a random number between min and max + * + * \param [IN] min range minimum value + * \param [IN] max range maximum value + * \retval random random value in range min..max + */ +int32_t randr( int32_t min, int32_t max ); + +/*! + * \brief Copies size elements of src array to dst array + * + * \remark STM32 Standard memcpy function only works on pointers that are aligned + * + * \param [OUT] dst Destination array + * \param [IN] src Source array + * \param [IN] size Number of bytes to be copied + */ +void memcpy1( uint8_t *dst, const uint8_t *src, uint16_t size ); + +/*! + * \brief Copies size elements of src array to dst array reversing the byte order + * + * \param [OUT] dst Destination array + * \param [IN] src Source array + * \param [IN] size Number of bytes to be copied + */ +void memcpyr( uint8_t *dst, const uint8_t *src, uint16_t size ); + +/*! + * \brief Set size elements of dst array with value + * + * \remark STM32 Standard memset function only works on pointers that are aligned + * + * \param [OUT] dst Destination array + * \param [IN] value Default value + * \param [IN] size Number of bytes to be copied + */ +void memset1( uint8_t *dst, uint8_t value, uint16_t size ); + +/*! + * \brief Converts a nibble to an hexadecimal character + * + * \param [IN] a Nibble to be converted + * \retval hexChar Converted hexadecimal character + */ +int8_t Nibble2HexChar( uint8_t a ); + +#endif // __UTILITIES_H__ diff --git a/src/mac/LoRaMac.c b/src/mac/LoRaMac.c new file mode 100755 index 0000000..ce6ae23 --- /dev/null +++ b/src/mac/LoRaMac.c @@ -0,0 +1,3369 @@ +/* + / _____) _ | | +( (____ _____ ____ _| |_ _____ ____| |__ + \____ \| ___ | (_ _) ___ |/ ___) _ \ + _____) ) ____| | | || |_| ____( (___| | | | +(______/|_____)_|_|_| \__)_____)\____)_| |_| + (C)2013 Semtech + ___ _____ _ ___ _ _____ ___ ___ ___ ___ +/ __|_ _/_\ / __| |/ / __/ _ \| _ \/ __| __| +\__ \ | |/ _ \ (__| ' <| _| (_) | / (__| _| +|___/ |_/_/ \_\___|_|\_\_| \___/|_|_\\___|___| +embedded.connectivity.solutions=============== + +Description: LoRa MAC layer implementation + +License: Revised BSD License, see LICENSE.TXT file include in the project + +Maintainer: Miguel Luis ( Semtech ), Gregory Cristian ( Semtech ) and Daniel Jaeckle ( STACKFORCE ) +*/ +#include "board.h" + +#include "LoRaMac.h" +#include "region/Region.h" +#include "LoRaMacCrypto.h" +#include "LoRaMacTest.h" + + + +/*! + * Maximum PHY layer payload size + */ +#define LORAMAC_PHY_MAXPAYLOAD 255 + +/*! + * Maximum MAC commands buffer size + */ +#define LORA_MAC_COMMAND_MAX_LENGTH 128 + +/*! + * Maximum length of the fOpts field + */ +#define LORA_MAC_COMMAND_MAX_FOPTS_LENGTH 15 + +/*! + * LoRaMac region. + */ +static LoRaMacRegion_t LoRaMacRegion; + +/*! + * LoRaMac duty cycle for the back-off procedure during the first hour. + */ +#define BACKOFF_DC_1_HOUR 100 + +/*! + * LoRaMac duty cycle for the back-off procedure during the next 10 hours. + */ +#define BACKOFF_DC_10_HOURS 1000 + +/*! + * LoRaMac duty cycle for the back-off procedure during the next 24 hours. + */ +#define BACKOFF_DC_24_HOURS 10000 + +/*! + * Device IEEE EUI + */ +static uint8_t *LoRaMacDevEui; + +/*! + * Application IEEE EUI + */ +static uint8_t *LoRaMacAppEui; + +/*! + * AES encryption/decryption cipher application key + */ +static uint8_t *LoRaMacAppKey; + +/*! + * AES encryption/decryption cipher network session key + */ +static uint8_t LoRaMacNwkSKey[] = +{ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 +}; + +/*! + * AES encryption/decryption cipher application session key + */ +static uint8_t LoRaMacAppSKey[] = +{ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 +}; + +/*! + * Device nonce is a random value extracted by issuing a sequence of RSSI + * measurements + */ +static uint16_t LoRaMacDevNonce; + +/*! + * Network ID ( 3 bytes ) + */ +static uint32_t LoRaMacNetID; + +/*! + * Mote Address + */ +static uint32_t LoRaMacDevAddr; + +/*! + * Multicast channels linked list + */ +static MulticastParams_t *MulticastChannels = NULL; + +/*! + * Actual device class + */ +static DeviceClass_t LoRaMacDeviceClass; + +/*! + * Indicates if the node is connected to a private or public network + */ +static bool PublicNetwork; + +/*! + * Indicates if the node supports repeaters + */ +static bool RepeaterSupport; + +/*! + * Buffer containing the data to be sent or received. + */ +static uint8_t LoRaMacBuffer[LORAMAC_PHY_MAXPAYLOAD]; + +/*! + * Length of packet in LoRaMacBuffer + */ +static uint16_t LoRaMacBufferPktLen = 0; + +/*! + * Length of the payload in LoRaMacBuffer + */ +static uint8_t LoRaMacTxPayloadLen = 0; + +/*! + * Buffer containing the upper layer data. + */ +static uint8_t LoRaMacRxPayload[LORAMAC_PHY_MAXPAYLOAD]; + +/*! + * LoRaMAC frame counter. Each time a packet is sent the counter is incremented. + * Only the 16 LSB bits are sent + */ +static uint32_t UpLinkCounter = 0; + +/*! + * LoRaMAC frame counter. Each time a packet is received the counter is incremented. + * Only the 16 LSB bits are received + */ +static uint32_t DownLinkCounter = 0; + +/*! + * IsPacketCounterFixed enables the MIC field tests by fixing the + * UpLinkCounter value + */ +static bool IsUpLinkCounterFixed = false; + +/*! + * Used for test purposes. Disables the opening of the reception windows. + */ +static bool IsRxWindowsEnabled = true; + +/*! + * Indicates if the MAC layer has already joined a network. + */ +static bool IsLoRaMacNetworkJoined = false; + +/*! + * LoRaMac ADR control status + */ +static bool AdrCtrlOn = false; + +/*! + * Counts the number of missed ADR acknowledgements + */ +static uint32_t AdrAckCounter = 0; + +/*! + * If the node has sent a FRAME_TYPE_DATA_CONFIRMED_UP this variable indicates + * if the nodes needs to manage the server acknowledgement. + */ +static bool NodeAckRequested = false; + +/*! + * If the server has sent a FRAME_TYPE_DATA_CONFIRMED_DOWN this variable indicates + * if the ACK bit must be set for the next transmission + */ +static bool SrvAckRequested = false; + +/*! + * Indicates if the MAC layer wants to send MAC commands + */ +static bool MacCommandsInNextTx = false; + +/*! + * Contains the current MacCommandsBuffer index + */ +static uint8_t MacCommandsBufferIndex = 0; + +/*! + * Contains the current MacCommandsBuffer index for MAC commands to repeat + */ +static uint8_t MacCommandsBufferToRepeatIndex = 0; + +/*! + * Buffer containing the MAC layer commands + */ +static uint8_t MacCommandsBuffer[LORA_MAC_COMMAND_MAX_LENGTH]; + +/*! + * Buffer containing the MAC layer commands which must be repeated + */ +static uint8_t MacCommandsBufferToRepeat[LORA_MAC_COMMAND_MAX_LENGTH]; + +/*! + * LoRaMac parameters + */ +LoRaMacParams_t LoRaMacParams; + +/*! + * LoRaMac default parameters + */ +LoRaMacParams_t LoRaMacParamsDefaults; + +/*! + * Uplink messages repetitions counter + */ +static uint8_t ChannelsNbRepCounter = 0; + +/*! + * Maximum duty cycle + * \remark Possibility to shutdown the device. + */ +static uint8_t MaxDCycle = 0; + +/*! + * Aggregated duty cycle management + */ +static uint16_t AggregatedDCycle; +static TimerTime_t AggregatedLastTxDoneTime; +static TimerTime_t AggregatedTimeOff; + +/*! + * Enables/Disables duty cycle management (Test only) + */ +static bool DutyCycleOn; + +/*! + * Current channel index + */ +static uint8_t Channel; + +/*! + * Current channel index + */ +static uint8_t LastTxChannel; + +/*! + * Set to true, if the last uplink was a join request + */ +static bool LastTxIsJoinRequest; + +/*! + * Stores the time at LoRaMac initialization. + * + * \remark Used for the BACKOFF_DC computation. + */ +static TimerTime_t LoRaMacInitializationTime = 0; + +/*! + * LoRaMac internal states + */ +enum eLoRaMacState +{ + LORAMAC_IDLE = 0x00000000, + LORAMAC_TX_RUNNING = 0x00000001, + LORAMAC_RX = 0x00000002, + LORAMAC_ACK_REQ = 0x00000004, + LORAMAC_ACK_RETRY = 0x00000008, + LORAMAC_TX_DELAYED = 0x00000010, + LORAMAC_TX_CONFIG = 0x00000020, + LORAMAC_RX_ABORT = 0x00000040, +}; + +/*! + * LoRaMac internal state + */ +uint32_t LoRaMacState = LORAMAC_IDLE; + +/*! + * LoRaMac timer used to check the LoRaMacState (runs every second) + */ +static TimerEvent_t MacStateCheckTimer; + +/*! + * LoRaMac upper layer event functions + */ +static LoRaMacPrimitives_t *LoRaMacPrimitives; + +/*! + * LoRaMac upper layer callback functions + */ +static LoRaMacCallback_t *LoRaMacCallbacks; + +/*! + * Radio events function pointer + */ +static RadioEvents_t RadioEvents; + +/*! + * LoRaMac duty cycle delayed Tx timer + */ +static TimerEvent_t TxDelayedTimer; + +/*! + * LoRaMac reception windows timers + */ +static TimerEvent_t RxWindowTimer1; +static TimerEvent_t RxWindowTimer2; + +/*! + * LoRaMac reception windows delay + * \remark normal frame: RxWindowXDelay = ReceiveDelayX - RADIO_WAKEUP_TIME + * join frame : RxWindowXDelay = JoinAcceptDelayX - RADIO_WAKEUP_TIME + */ +static uint32_t RxWindow1Delay; +static uint32_t RxWindow2Delay; + +/*! + * LoRaMac Rx windows configuration + */ +static RxConfigParams_t RxWindow1Config; +static RxConfigParams_t RxWindow2Config; + +/*! + * Acknowledge timeout timer. Used for packet retransmissions. + */ +static TimerEvent_t AckTimeoutTimer; + +/*! + * Number of trials to get a frame acknowledged + */ +static uint8_t AckTimeoutRetries = 1; + +/*! + * Number of trials to get a frame acknowledged + */ +static uint8_t AckTimeoutRetriesCounter = 1; + +/*! + * Indicates if the AckTimeout timer has expired or not + */ +static bool AckTimeoutRetry = false; + +/*! + * Last transmission time on air + */ +TimerTime_t TxTimeOnAir = 0; + +/*! + * Number of trials for the Join Request + */ +static uint8_t JoinRequestTrials; + +/*! + * Maximum number of trials for the Join Request + */ +static uint8_t MaxJoinRequestTrials; + +/*! + * Structure to hold an MCPS indication data. + */ +static McpsIndication_t McpsIndication; + +/*! + * Structure to hold MCPS confirm data. + */ +static McpsConfirm_t McpsConfirm; + +/*! + * Structure to hold MLME confirm data. + */ +static MlmeConfirm_t MlmeConfirm; + +/*! + * Holds the current rx window slot + */ +static uint8_t RxSlot = 0; + +/*! + * LoRaMac tx/rx operation state + */ +LoRaMacFlags_t LoRaMacFlags; + +/*! + * \brief Function to be executed on Radio Tx Done event + */ +static void OnRadioTxDone( void ); + +/*! + * \brief This function prepares the MAC to abort the execution of function + * OnRadioRxDone in case of a reception error. + */ +static void PrepareRxDoneAbort( void ); + +/*! + * \brief Function to be executed on Radio Rx Done event + */ +static void OnRadioRxDone( uint8_t *payload, uint16_t size, int16_t rssi, int8_t snr ); + +/*! + * \brief Function executed on Radio Tx Timeout event + */ +static void OnRadioTxTimeout( void ); + +/*! + * \brief Function executed on Radio Rx error event + */ +static void OnRadioRxError( void ); + +/*! + * \brief Function executed on Radio Rx Timeout event + */ +static void OnRadioRxTimeout( void ); + +/*! + * \brief Function executed on Resend Frame timer event. + */ +static void OnMacStateCheckTimerEvent( void ); + +/*! + * \brief Function executed on duty cycle delayed Tx timer event + */ +static void OnTxDelayedTimerEvent( void ); + +/*! + * \brief Function executed on first Rx window timer event + */ +static void OnRxWindow1TimerEvent( void ); + +/*! + * \brief Function executed on second Rx window timer event + */ +static void OnRxWindow2TimerEvent( void ); + +/*! + * \brief Function executed on AckTimeout timer event + */ +static void OnAckTimeoutTimerEvent( void ); + +/*! + * \brief Initializes and opens the reception window + * + * \param [IN] rxContinuous Set to true, if the RX is in continuous mode + * \param [IN] maxRxWindow Maximum RX window timeout + */ +static void RxWindowSetup( bool rxContinuous, uint32_t maxRxWindow ); + +/*! + * \brief Adds a new MAC command to be sent. + * + * \Remark MAC layer internal function + * + * \param [in] cmd MAC command to be added + * [MOTE_MAC_LINK_CHECK_REQ, + * MOTE_MAC_LINK_ADR_ANS, + * MOTE_MAC_DUTY_CYCLE_ANS, + * MOTE_MAC_RX2_PARAM_SET_ANS, + * MOTE_MAC_DEV_STATUS_ANS + * MOTE_MAC_NEW_CHANNEL_ANS] + * \param [in] p1 1st parameter ( optional depends on the command ) + * \param [in] p2 2nd parameter ( optional depends on the command ) + * + * \retval status Function status [0: OK, 1: Unknown command, 2: Buffer full] + */ +static LoRaMacStatus_t AddMacCommand( uint8_t cmd, uint8_t p1, uint8_t p2 ); + +/*! + * \brief Parses the MAC commands which must be repeated. + * + * \Remark MAC layer internal function + * + * \param [IN] cmdBufIn Buffer which stores the MAC commands to send + * \param [IN] length Length of the input buffer to parse + * \param [OUT] cmdBufOut Buffer which stores the MAC commands which must be + * repeated. + * + * \retval Size of the MAC commands to repeat. + */ +static uint8_t ParseMacCommandsToRepeat( uint8_t* cmdBufIn, uint8_t length, uint8_t* cmdBufOut ); + +/*! + * \brief Validates if the payload fits into the frame, taking the datarate + * into account. + * + * \details Refer to chapter 4.3.2 of the LoRaWAN specification, v1.0 + * + * \param lenN Length of the application payload. The length depends on the + * datarate and is region specific + * + * \param datarate Current datarate + * + * \param fOptsLen Length of the fOpts field + * + * \retval [false: payload does not fit into the frame, true: payload fits into + * the frame] + */ +static bool ValidatePayloadLength( uint8_t lenN, int8_t datarate, uint8_t fOptsLen ); + +/*! + * \brief Decodes MAC commands in the fOpts field and in the payload + */ +static void ProcessMacCommands( uint8_t *payload, uint8_t macIndex, uint8_t commandsSize, uint8_t snr ); + +/*! + * \brief LoRaMAC layer generic send frame + * + * \param [IN] macHdr MAC header field + * \param [IN] fPort MAC payload port + * \param [IN] fBuffer MAC data buffer to be sent + * \param [IN] fBufferSize MAC data buffer size + * \retval status Status of the operation. + */ +LoRaMacStatus_t Send( LoRaMacHeader_t *macHdr, uint8_t fPort, void *fBuffer, uint16_t fBufferSize ); + +/*! + * \brief LoRaMAC layer frame buffer initialization + * + * \param [IN] macHdr MAC header field + * \param [IN] fCtrl MAC frame control field + * \param [IN] fOpts MAC commands buffer + * \param [IN] fPort MAC payload port + * \param [IN] fBuffer MAC data buffer to be sent + * \param [IN] fBufferSize MAC data buffer size + * \retval status Status of the operation. + */ +LoRaMacStatus_t PrepareFrame( LoRaMacHeader_t *macHdr, LoRaMacFrameCtrl_t *fCtrl, uint8_t fPort, void *fBuffer, uint16_t fBufferSize ); + +/* + * \brief Schedules the frame according to the duty cycle + * + * \retval Status of the operation + */ +static LoRaMacStatus_t ScheduleTx( void ); + +/* + * \brief Calculates the back-off time for the band of a channel. + * + * \param [IN] channel The last Tx channel index + */ +static void CalculateBackOff( uint8_t channel ); + +/*! + * \brief LoRaMAC layer prepared frame buffer transmission with channel specification + * + * \remark PrepareFrame must be called at least once before calling this + * function. + * + * \param [IN] channel Channel to transmit on + * \retval status Status of the operation. + */ +LoRaMacStatus_t SendFrameOnChannel( uint8_t channel ); + +/*! + * \brief Sets the radio in continuous transmission mode + * + * \remark Uses the radio parameters set on the previous transmission. + * + * \param [IN] timeout Time in seconds while the radio is kept in continuous wave mode + * \retval status Status of the operation. + */ +LoRaMacStatus_t SetTxContinuousWave( uint16_t timeout ); + +/*! + * \brief Sets the radio in continuous transmission mode + * + * \remark Uses the radio parameters set on the previous transmission. + * + * \param [IN] timeout Time in seconds while the radio is kept in continuous wave mode + * \param [IN] frequency RF frequency to be set. + * \param [IN] power RF output power to be set. + * \retval status Status of the operation. + */ +LoRaMacStatus_t SetTxContinuousWave1( uint16_t timeout, uint32_t frequency, uint8_t power ); + +/*! + * \brief Resets MAC specific parameters to default + */ +static void ResetMacParameters( void ); + +static void OnRadioTxDone( void ) +{ + GetPhyParams_t getPhy; + PhyParam_t phyParam; + SetBandTxDoneParams_t txDone; + TimerTime_t curTime = TimerGetCurrentTime( ); + + if( LoRaMacDeviceClass != CLASS_C ) + { + Radio.Sleep( ); + } + else + { + OnRxWindow2TimerEvent( ); + } + + // Setup timers + if( IsRxWindowsEnabled == true ) + { + TimerSetValue( &RxWindowTimer1, RxWindow1Delay ); + TimerStart( &RxWindowTimer1 ); + if( LoRaMacDeviceClass != CLASS_C ) + { + TimerSetValue( &RxWindowTimer2, RxWindow2Delay ); + TimerStart( &RxWindowTimer2 ); + } + if( ( LoRaMacDeviceClass == CLASS_C ) || ( NodeAckRequested == true ) ) + { + getPhy.Attribute = PHY_ACK_TIMEOUT; + phyParam = RegionGetPhyParam( LoRaMacRegion, &getPhy ); + TimerSetValue( &AckTimeoutTimer, RxWindow2Delay + phyParam.Value ); + TimerStart( &AckTimeoutTimer ); + } + } + else + { + McpsConfirm.Status = LORAMAC_EVENT_INFO_STATUS_OK; + MlmeConfirm.Status = LORAMAC_EVENT_INFO_STATUS_RX2_TIMEOUT; + + if( LoRaMacFlags.Value == 0 ) + { + LoRaMacFlags.Bits.McpsReq = 1; + } + LoRaMacFlags.Bits.MacDone = 1; + } + + // Verify if the last uplink was a join request + if( ( LoRaMacFlags.Bits.MlmeReq == 1 ) && ( MlmeConfirm.MlmeRequest == MLME_JOIN ) ) + { + LastTxIsJoinRequest = true; + } + else + { + LastTxIsJoinRequest = false; + } + + // Store last Tx channel + LastTxChannel = Channel; + // Update last tx done time for the current channel + txDone.Channel = Channel; + txDone.Joined = IsLoRaMacNetworkJoined; + txDone.LastTxDoneTime = curTime; + RegionSetBandTxDone( LoRaMacRegion, &txDone ); + // Update Aggregated last tx done time + AggregatedLastTxDoneTime = curTime; + + if( NodeAckRequested == false ) + { + McpsConfirm.Status = LORAMAC_EVENT_INFO_STATUS_OK; + ChannelsNbRepCounter++; + } + DPRINTF("TDn\r\n"); +} + +static void PrepareRxDoneAbort( void ) +{ + LoRaMacState |= LORAMAC_RX_ABORT; + + if( NodeAckRequested ) + { + OnAckTimeoutTimerEvent( ); + } + + LoRaMacFlags.Bits.McpsInd = 1; + LoRaMacFlags.Bits.MacDone = 1; + + // Trig OnMacCheckTimerEvent call as soon as possible + TimerSetValue( &MacStateCheckTimer, 1 ); + TimerStart( &MacStateCheckTimer ); +} + +static void OnRadioRxDone( uint8_t *payload, uint16_t size, int16_t rssi, int8_t snr ) +{ + LoRaMacHeader_t macHdr; + LoRaMacFrameCtrl_t fCtrl; + ApplyCFListParams_t applyCFList; + GetPhyParams_t getPhy; + PhyParam_t phyParam; + bool skipIndication = false; + + uint8_t pktHeaderLen = 0; + uint32_t address = 0; + uint8_t appPayloadStartIndex = 0; + uint8_t port = 0xFF; + uint8_t frameLen = 0; + uint32_t mic = 0; + uint32_t micRx = 0; + + uint16_t sequenceCounter = 0; + uint16_t sequenceCounterPrev = 0; + uint16_t sequenceCounterDiff = 0; + uint32_t downLinkCounter = 0; + + MulticastParams_t *curMulticastParams = NULL; + uint8_t *nwkSKey = LoRaMacNwkSKey; + uint8_t *appSKey = LoRaMacAppSKey; + + uint8_t multicast = 0; + + bool isMicOk = false; + + McpsConfirm.AckReceived = false; + McpsIndication.Rssi = rssi; + McpsIndication.Snr = snr; + McpsIndication.RxSlot = RxSlot; + McpsIndication.Port = 0; + McpsIndication.Multicast = 0; + McpsIndication.FramePending = 0; + McpsIndication.Buffer = NULL; + McpsIndication.BufferSize = 0; + McpsIndication.RxData = false; + McpsIndication.AckReceived = false; + McpsIndication.DownLinkCounter = 0; + McpsIndication.McpsIndication = MCPS_UNCONFIRMED; + + Radio.Sleep( ); + TimerStop( &RxWindowTimer2 ); + + macHdr.Value = payload[pktHeaderLen++]; + DPRINTF("MType=%d\r\n", macHdr.Bits.MType); + switch( macHdr.Bits.MType ) + { + case FRAME_TYPE_JOIN_ACCEPT: + if( IsLoRaMacNetworkJoined == true ) + { + McpsIndication.Status = LORAMAC_EVENT_INFO_STATUS_ERROR; + PrepareRxDoneAbort( ); + return; + } + LoRaMacJoinDecrypt( payload + 1, size - 1, LoRaMacAppKey, LoRaMacRxPayload + 1 ); + + LoRaMacRxPayload[0] = macHdr.Value; + + LoRaMacJoinComputeMic( LoRaMacRxPayload, size - LORAMAC_MFR_LEN, LoRaMacAppKey, &mic ); + + micRx |= ( uint32_t )LoRaMacRxPayload[size - LORAMAC_MFR_LEN]; + micRx |= ( ( uint32_t )LoRaMacRxPayload[size - LORAMAC_MFR_LEN + 1] << 8 ); + micRx |= ( ( uint32_t )LoRaMacRxPayload[size - LORAMAC_MFR_LEN + 2] << 16 ); + micRx |= ( ( uint32_t )LoRaMacRxPayload[size - LORAMAC_MFR_LEN + 3] << 24 ); + + if( micRx == mic ) + { + LoRaMacJoinComputeSKeys( LoRaMacAppKey, LoRaMacRxPayload + 1, LoRaMacDevNonce, LoRaMacNwkSKey, LoRaMacAppSKey ); + + LoRaMacNetID = ( uint32_t )LoRaMacRxPayload[4]; + LoRaMacNetID |= ( ( uint32_t )LoRaMacRxPayload[5] << 8 ); + LoRaMacNetID |= ( ( uint32_t )LoRaMacRxPayload[6] << 16 ); + + LoRaMacDevAddr = ( uint32_t )LoRaMacRxPayload[7]; + LoRaMacDevAddr |= ( ( uint32_t )LoRaMacRxPayload[8] << 8 ); + LoRaMacDevAddr |= ( ( uint32_t )LoRaMacRxPayload[9] << 16 ); + LoRaMacDevAddr |= ( ( uint32_t )LoRaMacRxPayload[10] << 24 ); + + // DLSettings + LoRaMacParams.Rx1DrOffset = ( LoRaMacRxPayload[11] >> 4 ) & 0x07; + LoRaMacParams.Rx2Channel.Datarate = LoRaMacRxPayload[11] & 0x0F; + + // RxDelay + LoRaMacParams.ReceiveDelay1 = ( LoRaMacRxPayload[12] & 0x0F ); + if( LoRaMacParams.ReceiveDelay1 == 0 ) + { + LoRaMacParams.ReceiveDelay1 = 1; + } + LoRaMacParams.ReceiveDelay1 *= 1000; + LoRaMacParams.ReceiveDelay2 = LoRaMacParams.ReceiveDelay1 + 1000; + + // Apply CF list + applyCFList.Payload = &LoRaMacRxPayload[13]; + // Size of the regular payload is 12. Plus 1 byte MHDR and 4 bytes MIC + applyCFList.Size = size - 17; + + RegionApplyCFList( LoRaMacRegion, &applyCFList ); + + MlmeConfirm.Status = LORAMAC_EVENT_INFO_STATUS_OK; + IsLoRaMacNetworkJoined = true; + LoRaMacParams.ChannelsDatarate = LoRaMacParamsDefaults.ChannelsDatarate; + } + else + { + MlmeConfirm.Status = LORAMAC_EVENT_INFO_STATUS_JOIN_FAIL; + } + break; + case FRAME_TYPE_DATA_CONFIRMED_DOWN: + case FRAME_TYPE_DATA_UNCONFIRMED_DOWN: + { + // Check if the received payload size is valid + getPhy.UplinkDwellTime = LoRaMacParams.DownlinkDwellTime; + getPhy.Datarate = McpsIndication.RxDatarate; + getPhy.Attribute = PHY_MAX_PAYLOAD; + + // Get the maximum payload length + if( RepeaterSupport == true ) + { + getPhy.Attribute = PHY_MAX_PAYLOAD_REPEATER; + } + phyParam = RegionGetPhyParam( LoRaMacRegion, &getPhy ); + if( MAX( 0, ( int16_t )( ( int16_t )size - ( int16_t )LORA_MAC_FRMPAYLOAD_OVERHEAD ) ) > phyParam.Value ) + { + McpsIndication.Status = LORAMAC_EVENT_INFO_STATUS_ERROR; + PrepareRxDoneAbort( ); + return; + } + + address = payload[pktHeaderLen++]; + address |= ( (uint32_t)payload[pktHeaderLen++] << 8 ); + address |= ( (uint32_t)payload[pktHeaderLen++] << 16 ); + address |= ( (uint32_t)payload[pktHeaderLen++] << 24 ); + + if( address != LoRaMacDevAddr ) + { + curMulticastParams = MulticastChannels; + while( curMulticastParams != NULL ) + { + if( address == curMulticastParams->Address ) + { + multicast = 1; + nwkSKey = curMulticastParams->NwkSKey; + appSKey = curMulticastParams->AppSKey; + downLinkCounter = curMulticastParams->DownLinkCounter; + break; + } + curMulticastParams = curMulticastParams->Next; + } + if( multicast == 0 ) + { + // We are not the destination of this frame. + McpsIndication.Status = LORAMAC_EVENT_INFO_STATUS_ADDRESS_FAIL; + PrepareRxDoneAbort( ); + return; + } + } + else + { + multicast = 0; + nwkSKey = LoRaMacNwkSKey; + appSKey = LoRaMacAppSKey; + downLinkCounter = DownLinkCounter; + } + + fCtrl.Value = payload[pktHeaderLen++]; + + sequenceCounter = ( uint16_t )payload[pktHeaderLen++]; + sequenceCounter |= ( uint16_t )payload[pktHeaderLen++] << 8; + + appPayloadStartIndex = 8 + fCtrl.Bits.FOptsLen; + + micRx |= ( uint32_t )payload[size - LORAMAC_MFR_LEN]; + micRx |= ( ( uint32_t )payload[size - LORAMAC_MFR_LEN + 1] << 8 ); + micRx |= ( ( uint32_t )payload[size - LORAMAC_MFR_LEN + 2] << 16 ); + micRx |= ( ( uint32_t )payload[size - LORAMAC_MFR_LEN + 3] << 24 ); + + sequenceCounterPrev = ( uint16_t )downLinkCounter; + sequenceCounterDiff = ( sequenceCounter - sequenceCounterPrev ); + + if( sequenceCounterDiff < ( 1 << 15 ) ) + { + downLinkCounter += sequenceCounterDiff; + LoRaMacComputeMic( payload, size - LORAMAC_MFR_LEN, nwkSKey, address, DOWN_LINK, downLinkCounter, &mic ); + if( micRx == mic ) + { + isMicOk = true; + } + } + else + { + // check for sequence roll-over + uint32_t downLinkCounterTmp = downLinkCounter + 0x10000 + ( int16_t )sequenceCounterDiff; + LoRaMacComputeMic( payload, size - LORAMAC_MFR_LEN, nwkSKey, address, DOWN_LINK, downLinkCounterTmp, &mic ); + if( micRx == mic ) + { + isMicOk = true; + downLinkCounter = downLinkCounterTmp; + } + } + + // Check for a the maximum allowed counter difference + getPhy.Attribute = PHY_MAX_FCNT_GAP; + phyParam = RegionGetPhyParam( LoRaMacRegion, &getPhy ); + if( sequenceCounterDiff >= phyParam.Value ) + { + McpsIndication.Status = LORAMAC_EVENT_INFO_STATUS_DOWNLINK_TOO_MANY_FRAMES_LOSS; + McpsIndication.DownLinkCounter = downLinkCounter; + PrepareRxDoneAbort( ); + return; + } + + if( isMicOk == true ) + { + McpsIndication.Status = LORAMAC_EVENT_INFO_STATUS_OK; + McpsIndication.Multicast = multicast; + McpsIndication.FramePending = fCtrl.Bits.FPending; + McpsIndication.Buffer = NULL; + McpsIndication.BufferSize = 0; + McpsIndication.DownLinkCounter = downLinkCounter; + + McpsConfirm.Status = LORAMAC_EVENT_INFO_STATUS_OK; + + AdrAckCounter = 0; + MacCommandsBufferToRepeatIndex = 0; + + // Update 32 bits downlink counter + if( multicast == 1 ) + { + McpsIndication.McpsIndication = MCPS_MULTICAST; + + if( ( curMulticastParams->DownLinkCounter == downLinkCounter ) && + ( curMulticastParams->DownLinkCounter != 0 ) ) + { + McpsIndication.Status = LORAMAC_EVENT_INFO_STATUS_DOWNLINK_REPEATED; + McpsIndication.DownLinkCounter = downLinkCounter; + PrepareRxDoneAbort( ); + return; + } + curMulticastParams->DownLinkCounter = downLinkCounter; + } + else + { + if( macHdr.Bits.MType == FRAME_TYPE_DATA_CONFIRMED_DOWN ) + { + SrvAckRequested = true; + McpsIndication.McpsIndication = MCPS_CONFIRMED; + + if( ( DownLinkCounter == downLinkCounter ) && + ( DownLinkCounter != 0 ) ) + { + // Duplicated confirmed downlink. Skip indication. + // In this case, the MAC layer shall accept the MAC commands + // which are included in the downlink retransmission. + // It should not provide the same frame to the application + // layer again. + skipIndication = true; + } + } + else + { + SrvAckRequested = false; + McpsIndication.McpsIndication = MCPS_UNCONFIRMED; + + if( ( DownLinkCounter == downLinkCounter ) && + ( DownLinkCounter != 0 ) ) + { + McpsIndication.Status = LORAMAC_EVENT_INFO_STATUS_DOWNLINK_REPEATED; + McpsIndication.DownLinkCounter = downLinkCounter; + PrepareRxDoneAbort( ); + return; + } + } + DownLinkCounter = downLinkCounter; + } + + // This must be done before parsing the payload and the MAC commands. + // We need to reset the MacCommandsBufferIndex here, since we need + // to take retransmissions and repetitions into account. Error cases + // will be handled in function OnMacStateCheckTimerEvent. + if( McpsConfirm.McpsRequest == MCPS_CONFIRMED ) + { + if( fCtrl.Bits.Ack == 1 ) + {// Reset MacCommandsBufferIndex when we have received an ACK. + MacCommandsBufferIndex = 0; + } + } + else + {// Reset the variable if we have received any valid frame. + MacCommandsBufferIndex = 0; + } + + // Process payload and MAC commands + if( ( ( size - 4 ) - appPayloadStartIndex ) > 0 ) + { + port = payload[appPayloadStartIndex++]; + frameLen = ( size - 4 ) - appPayloadStartIndex; + + McpsIndication.Port = port; + + if( port == 0 ) + { + // Only allow frames which do not have fOpts + if( fCtrl.Bits.FOptsLen == 0 ) + { + LoRaMacPayloadDecrypt( payload + appPayloadStartIndex, + frameLen, + nwkSKey, + address, + DOWN_LINK, + downLinkCounter, + LoRaMacRxPayload ); + + // Decode frame payload MAC commands + ProcessMacCommands( LoRaMacRxPayload, 0, frameLen, snr ); + } + else + { + skipIndication = true; + } + } + else + { + if( fCtrl.Bits.FOptsLen > 0 ) + { + // Decode Options field MAC commands. Omit the fPort. + ProcessMacCommands( payload, 8, appPayloadStartIndex - 1, snr ); + } + + LoRaMacPayloadDecrypt( payload + appPayloadStartIndex, + frameLen, + appSKey, + address, + DOWN_LINK, + downLinkCounter, + LoRaMacRxPayload ); + + if( skipIndication == false ) + { + McpsIndication.Buffer = LoRaMacRxPayload; + McpsIndication.BufferSize = frameLen; + McpsIndication.RxData = true; + } + } + } + else + { + if( fCtrl.Bits.FOptsLen > 0 ) + { + // Decode Options field MAC commands + ProcessMacCommands( payload, 8, appPayloadStartIndex, snr ); + } + } + + if( skipIndication == false ) + { + // Check if the frame is an acknowledgement + if( fCtrl.Bits.Ack == 1 ) + { + McpsConfirm.AckReceived = true; + McpsIndication.AckReceived = true; + + // Stop the AckTimeout timer as no more retransmissions + // are needed. + TimerStop( &AckTimeoutTimer ); + } + else + { + McpsConfirm.AckReceived = false; + + if( AckTimeoutRetriesCounter > AckTimeoutRetries ) + { + // Stop the AckTimeout timer as no more retransmissions + // are needed. + TimerStop( &AckTimeoutTimer ); + } + } + } + // Provide always an indication, skip the callback to the user application, + // in case of a confirmed downlink retransmission. + LoRaMacFlags.Bits.McpsInd = 1; + LoRaMacFlags.Bits.McpsIndSkip = skipIndication; + } + else + { + McpsIndication.Status = LORAMAC_EVENT_INFO_STATUS_MIC_FAIL; + + PrepareRxDoneAbort( ); + return; + } + } + break; + case FRAME_TYPE_PROPRIETARY: + { + memcpy1( LoRaMacRxPayload, &payload[pktHeaderLen], size ); + + McpsIndication.McpsIndication = MCPS_PROPRIETARY; + McpsIndication.Status = LORAMAC_EVENT_INFO_STATUS_OK; + McpsIndication.Buffer = LoRaMacRxPayload; + McpsIndication.BufferSize = size - pktHeaderLen; + + LoRaMacFlags.Bits.McpsInd = 1; + break; + } + default: + McpsIndication.Status = LORAMAC_EVENT_INFO_STATUS_ERROR; + PrepareRxDoneAbort( ); + break; + } + LoRaMacFlags.Bits.MacDone = 1; + + // Trig OnMacCheckTimerEvent call as soon as possible + TimerSetValue( &MacStateCheckTimer, 1 ); + TimerStart( &MacStateCheckTimer ); +} + +static void OnRadioTxTimeout( void ) +{ + if( LoRaMacDeviceClass != CLASS_C ) + { + Radio.Sleep( ); + } + else + { + OnRxWindow2TimerEvent( ); + } + + McpsConfirm.Status = LORAMAC_EVENT_INFO_STATUS_TX_TIMEOUT; + MlmeConfirm.Status = LORAMAC_EVENT_INFO_STATUS_TX_TIMEOUT; + LoRaMacFlags.Bits.MacDone = 1; +} + +static void OnRadioRxError( void ) +{ + if( LoRaMacDeviceClass != CLASS_C ) + { + Radio.Sleep( ); + } + else + { + OnRxWindow2TimerEvent( ); + } + + if( RxSlot == 0 ) + { + if( NodeAckRequested == true ) + { + McpsConfirm.Status = LORAMAC_EVENT_INFO_STATUS_RX1_ERROR; + } + MlmeConfirm.Status = LORAMAC_EVENT_INFO_STATUS_RX1_ERROR; + + if( TimerGetElapsedTime( AggregatedLastTxDoneTime ) >= RxWindow2Delay ) + { + LoRaMacFlags.Bits.MacDone = 1; + } + } + else + { + if( NodeAckRequested == true ) + { + McpsConfirm.Status = LORAMAC_EVENT_INFO_STATUS_RX2_ERROR; + } + MlmeConfirm.Status = LORAMAC_EVENT_INFO_STATUS_RX2_ERROR; + LoRaMacFlags.Bits.MacDone = 1; + } +} + +static void OnRadioRxTimeout( void ) +{ + if( LoRaMacDeviceClass != CLASS_C ) + { + Radio.Sleep( ); + } + else + { + OnRxWindow2TimerEvent( ); + } + + if( RxSlot == 0 ) + { + if( NodeAckRequested == true ) + { + McpsConfirm.Status = LORAMAC_EVENT_INFO_STATUS_RX1_TIMEOUT; + } + MlmeConfirm.Status = LORAMAC_EVENT_INFO_STATUS_RX1_TIMEOUT; + + if( TimerGetElapsedTime( AggregatedLastTxDoneTime ) >= RxWindow2Delay ) + { + LoRaMacFlags.Bits.MacDone = 1; + } + } + else + { + if( NodeAckRequested == true ) + { + McpsConfirm.Status = LORAMAC_EVENT_INFO_STATUS_RX2_TIMEOUT; + } + MlmeConfirm.Status = LORAMAC_EVENT_INFO_STATUS_RX2_TIMEOUT; + + if( LoRaMacDeviceClass != CLASS_C ) + { + LoRaMacFlags.Bits.MacDone = 1; + } + } + DPRINTF("RxTo\r\n"); +} + +static void OnMacStateCheckTimerEvent( void ) +{ + GetPhyParams_t getPhy; + PhyParam_t phyParam; + bool txTimeout = false; + + TimerStop( &MacStateCheckTimer ); + + if( LoRaMacFlags.Bits.MacDone == 1 ) + { + if( ( LoRaMacState & LORAMAC_RX_ABORT ) == LORAMAC_RX_ABORT ) + { + LoRaMacState &= ~LORAMAC_RX_ABORT; + LoRaMacState &= ~LORAMAC_TX_RUNNING; + } + + if( ( LoRaMacFlags.Bits.MlmeReq == 1 ) || ( ( LoRaMacFlags.Bits.McpsReq == 1 ) ) ) + { + if( ( McpsConfirm.Status == LORAMAC_EVENT_INFO_STATUS_TX_TIMEOUT ) || + ( MlmeConfirm.Status == LORAMAC_EVENT_INFO_STATUS_TX_TIMEOUT ) ) + { + // Stop transmit cycle due to tx timeout. + LoRaMacState &= ~LORAMAC_TX_RUNNING; + MacCommandsBufferIndex = 0; + McpsConfirm.NbRetries = AckTimeoutRetriesCounter; + McpsConfirm.AckReceived = false; + McpsConfirm.TxTimeOnAir = 0; + txTimeout = true; + } + } + + if( ( NodeAckRequested == false ) && ( txTimeout == false ) ) + { + if( ( LoRaMacFlags.Bits.MlmeReq == 1 ) || ( ( LoRaMacFlags.Bits.McpsReq == 1 ) ) ) + { + if( ( LoRaMacFlags.Bits.MlmeReq == 1 ) && ( MlmeConfirm.MlmeRequest == MLME_JOIN ) ) + {// Procedure for the join request + MlmeConfirm.NbRetries = JoinRequestTrials; + + if( MlmeConfirm.Status == LORAMAC_EVENT_INFO_STATUS_OK ) + {// Node joined successfully + UpLinkCounter = 0; + ChannelsNbRepCounter = 0; + LoRaMacState &= ~LORAMAC_TX_RUNNING; + } + else + { + if( JoinRequestTrials >= MaxJoinRequestTrials ) + { + LoRaMacState &= ~LORAMAC_TX_RUNNING; + } + else + { + LoRaMacFlags.Bits.MacDone = 0; + // Sends the same frame again + OnTxDelayedTimerEvent( ); + } + } + } + else + {// Procedure for all other frames + if( ( ChannelsNbRepCounter >= LoRaMacParams.ChannelsNbRep ) || ( LoRaMacFlags.Bits.McpsInd == 1 ) ) + { + if( LoRaMacFlags.Bits.McpsInd == 0 ) + { // Maximum repetitions without downlink. Reset MacCommandsBufferIndex. Increase ADR Ack counter. + // Only process the case when the MAC did not receive a downlink. + MacCommandsBufferIndex = 0; + AdrAckCounter++; + } + + ChannelsNbRepCounter = 0; + + if( IsUpLinkCounterFixed == false ) + { + UpLinkCounter++; + } + + LoRaMacState &= ~LORAMAC_TX_RUNNING; + } + else + { + LoRaMacFlags.Bits.MacDone = 0; + // Sends the same frame again + OnTxDelayedTimerEvent( ); + } + } + } + } + + if( LoRaMacFlags.Bits.McpsInd == 1 ) + {// Procedure if we received a frame + if( ( McpsConfirm.AckReceived == true ) || ( AckTimeoutRetriesCounter > AckTimeoutRetries ) ) + { + AckTimeoutRetry = false; + NodeAckRequested = false; + if( IsUpLinkCounterFixed == false ) + { + UpLinkCounter++; + } + McpsConfirm.NbRetries = AckTimeoutRetriesCounter; + + LoRaMacState &= ~LORAMAC_TX_RUNNING; + } + } + + if( ( AckTimeoutRetry == true ) && ( ( LoRaMacState & LORAMAC_TX_DELAYED ) == 0 ) ) + {// Retransmissions procedure for confirmed uplinks + AckTimeoutRetry = false; + if( ( AckTimeoutRetriesCounter < AckTimeoutRetries ) && ( AckTimeoutRetriesCounter <= MAX_ACK_RETRIES ) ) + { + AckTimeoutRetriesCounter++; + + if( ( AckTimeoutRetriesCounter % 2 ) == 1 ) + { + getPhy.Attribute = PHY_NEXT_LOWER_TX_DR; + getPhy.UplinkDwellTime = LoRaMacParams.UplinkDwellTime; + getPhy.Datarate = LoRaMacParams.ChannelsDatarate; + phyParam = RegionGetPhyParam( LoRaMacRegion, &getPhy ); + LoRaMacParams.ChannelsDatarate = phyParam.Value; + } + // Try to send the frame again + if( ScheduleTx( ) == LORAMAC_STATUS_OK ) + { + LoRaMacFlags.Bits.MacDone = 0; + } + else + { + // The DR is not applicable for the payload size + McpsConfirm.Status = LORAMAC_EVENT_INFO_STATUS_TX_DR_PAYLOAD_SIZE_ERROR; + + MacCommandsBufferIndex = 0; + LoRaMacState &= ~LORAMAC_TX_RUNNING; + NodeAckRequested = false; + McpsConfirm.AckReceived = false; + McpsConfirm.NbRetries = AckTimeoutRetriesCounter; + McpsConfirm.Datarate = LoRaMacParams.ChannelsDatarate; + if( IsUpLinkCounterFixed == false ) + { + UpLinkCounter++; + } + } + } + else + { + RegionInitDefaults( LoRaMacRegion, INIT_TYPE_RESTORE ); + + LoRaMacState &= ~LORAMAC_TX_RUNNING; + + MacCommandsBufferIndex = 0; + NodeAckRequested = false; + McpsConfirm.AckReceived = false; + McpsConfirm.NbRetries = AckTimeoutRetriesCounter; + if( IsUpLinkCounterFixed == false ) + { + UpLinkCounter++; + } + } + } + } + // Handle reception for Class B and Class C + if( ( LoRaMacState & LORAMAC_RX ) == LORAMAC_RX ) + { + LoRaMacState &= ~LORAMAC_RX; + } + if( LoRaMacState == LORAMAC_IDLE ) + { + if( LoRaMacFlags.Bits.McpsReq == 1 ) + { + LoRaMacPrimitives->MacMcpsConfirm( &McpsConfirm ); + LoRaMacFlags.Bits.McpsReq = 0; + } + + if( LoRaMacFlags.Bits.MlmeReq == 1 ) + { + LoRaMacPrimitives->MacMlmeConfirm( &MlmeConfirm ); + LoRaMacFlags.Bits.MlmeReq = 0; + } + + // Procedure done. Reset variables. + LoRaMacFlags.Bits.MacDone = 0; + } + else + { + // Operation not finished restart timer + TimerSetValue( &MacStateCheckTimer, MAC_STATE_CHECK_TIMEOUT ); + TimerStart( &MacStateCheckTimer ); + } + + if( LoRaMacFlags.Bits.McpsInd == 1 ) + { + if( LoRaMacDeviceClass == CLASS_C ) + {// Activate RX2 window for Class C + OnRxWindow2TimerEvent( ); + } + if( LoRaMacFlags.Bits.McpsIndSkip == 0 ) + { + LoRaMacPrimitives->MacMcpsIndication( &McpsIndication ); + } + LoRaMacFlags.Bits.McpsIndSkip = 0; + LoRaMacFlags.Bits.McpsInd = 0; + } +} + +static void OnTxDelayedTimerEvent( void ) +{ + LoRaMacHeader_t macHdr; + LoRaMacFrameCtrl_t fCtrl; + AlternateDrParams_t altDr; + + TimerStop( &TxDelayedTimer ); + LoRaMacState &= ~LORAMAC_TX_DELAYED; + + if( ( LoRaMacFlags.Bits.MlmeReq == 1 ) && ( MlmeConfirm.MlmeRequest == MLME_JOIN ) ) + { + ResetMacParameters( ); + + altDr.NbTrials = JoinRequestTrials + 1; + LoRaMacParams.ChannelsDatarate = RegionAlternateDr( LoRaMacRegion, &altDr ); + + macHdr.Value = 0; + macHdr.Bits.MType = FRAME_TYPE_JOIN_REQ; + + fCtrl.Value = 0; + fCtrl.Bits.Adr = AdrCtrlOn; + + /* In case of join request retransmissions, the stack must prepare + * the frame again, because the network server keeps track of the random + * LoRaMacDevNonce values to prevent reply attacks. */ + PrepareFrame( &macHdr, &fCtrl, 0, NULL, 0 ); + } + + ScheduleTx( ); +} + +static void OnRxWindow1TimerEvent( void ) +{ + TimerStop( &RxWindowTimer1 ); + RxSlot = 0; + + RxWindow1Config.Channel = Channel; + RxWindow1Config.DrOffset = LoRaMacParams.Rx1DrOffset; + RxWindow1Config.DownlinkDwellTime = LoRaMacParams.DownlinkDwellTime; + RxWindow1Config.RepeaterSupport = RepeaterSupport; + RxWindow1Config.RxContinuous = false; + RxWindow1Config.Window = RxSlot; + + if( LoRaMacDeviceClass == CLASS_C ) + { + Radio.Standby( ); + } + + RegionRxConfig( LoRaMacRegion, &RxWindow1Config, ( int8_t* )&McpsIndication.RxDatarate ); + RxWindowSetup( RxWindow1Config.RxContinuous, LoRaMacParams.MaxRxWindow ); + DPRINTF("\r\nRx1_Freq=%d, Dr_tb[%d] \r\n", RxWindow1Config.Frequency, RxWindow1Config.Datarate); +} + +static void OnRxWindow2TimerEvent( void ) +{ + TimerStop( &RxWindowTimer2 ); + + RxWindow2Config.Channel = Channel; + RxWindow2Config.Frequency = LoRaMacParams.Rx2Channel.Frequency; + RxWindow2Config.DownlinkDwellTime = LoRaMacParams.DownlinkDwellTime; + RxWindow2Config.RepeaterSupport = RepeaterSupport; + RxWindow2Config.Window = 1; + + if( LoRaMacDeviceClass != CLASS_C ) + { + RxWindow2Config.RxContinuous = false; + } + else + { + RxWindow2Config.RxContinuous = true; + } + + if( RegionRxConfig( LoRaMacRegion, &RxWindow2Config, ( int8_t* )&McpsIndication.RxDatarate ) == true ) + { + RxWindowSetup( RxWindow2Config.RxContinuous, LoRaMacParams.MaxRxWindow ); + RxSlot = RxWindow2Config.Window; + DPRINTF("\r\nRx2_Freq=%d, Dr_tb[%d] \r\n", RxWindow2Config.Frequency, RxWindow2Config.Datarate); + } + +} + +static void OnAckTimeoutTimerEvent( void ) +{ + TimerStop( &AckTimeoutTimer ); + + if( NodeAckRequested == true ) + { + AckTimeoutRetry = true; + LoRaMacState &= ~LORAMAC_ACK_REQ; + } + if( LoRaMacDeviceClass == CLASS_C ) + { + LoRaMacFlags.Bits.MacDone = 1; + } +} + +static void RxWindowSetup( bool rxContinuous, uint32_t maxRxWindow ) +{ + if( rxContinuous == false ) + { + Radio.Rx( maxRxWindow ); + } + else + { + Radio.Rx( 0 ); // Continuous mode + } +} + +static bool ValidatePayloadLength( uint8_t lenN, int8_t datarate, uint8_t fOptsLen ) +{ + GetPhyParams_t getPhy; + PhyParam_t phyParam; + uint16_t maxN = 0; + uint16_t payloadSize = 0; + + // Setup PHY request + getPhy.UplinkDwellTime = LoRaMacParams.UplinkDwellTime; + getPhy.Datarate = datarate; + getPhy.Attribute = PHY_MAX_PAYLOAD; + + // Get the maximum payload length + if( RepeaterSupport == true ) + { + getPhy.Attribute = PHY_MAX_PAYLOAD_REPEATER; + } + phyParam = RegionGetPhyParam( LoRaMacRegion, &getPhy ); + maxN = phyParam.Value; + + // Calculate the resulting payload size + payloadSize = ( lenN + fOptsLen ); + + // Validation of the application payload size + if( ( payloadSize <= maxN ) && ( payloadSize <= LORAMAC_PHY_MAXPAYLOAD ) ) + { + return true; + } + return false; +} + +static LoRaMacStatus_t AddMacCommand( uint8_t cmd, uint8_t p1, uint8_t p2 ) +{ + LoRaMacStatus_t status = LORAMAC_STATUS_BUSY; + // The maximum buffer length must take MAC commands to re-send into account. + uint8_t bufLen = LORA_MAC_COMMAND_MAX_LENGTH - MacCommandsBufferToRepeatIndex; + + switch( cmd ) + { + case MOTE_MAC_LINK_CHECK_REQ: + if( MacCommandsBufferIndex < bufLen ) + { + MacCommandsBuffer[MacCommandsBufferIndex++] = cmd; + // No payload for this command + status = LORAMAC_STATUS_OK; + } + break; + case MOTE_MAC_LINK_ADR_ANS: + if( MacCommandsBufferIndex < ( bufLen - 1 ) ) + { + MacCommandsBuffer[MacCommandsBufferIndex++] = cmd; + // Margin + MacCommandsBuffer[MacCommandsBufferIndex++] = p1; + status = LORAMAC_STATUS_OK; + } + break; + case MOTE_MAC_DUTY_CYCLE_ANS: + if( MacCommandsBufferIndex < bufLen ) + { + MacCommandsBuffer[MacCommandsBufferIndex++] = cmd; + // No payload for this answer + status = LORAMAC_STATUS_OK; + } + break; + case MOTE_MAC_RX_PARAM_SETUP_ANS: + if( MacCommandsBufferIndex < ( bufLen - 1 ) ) + { + MacCommandsBuffer[MacCommandsBufferIndex++] = cmd; + // Status: Datarate ACK, Channel ACK + MacCommandsBuffer[MacCommandsBufferIndex++] = p1; + status = LORAMAC_STATUS_OK; + } + break; + case MOTE_MAC_DEV_STATUS_ANS: + if( MacCommandsBufferIndex < ( bufLen - 2 ) ) + { + MacCommandsBuffer[MacCommandsBufferIndex++] = cmd; + // 1st byte Battery + // 2nd byte Margin + MacCommandsBuffer[MacCommandsBufferIndex++] = p1; + MacCommandsBuffer[MacCommandsBufferIndex++] = p2; + status = LORAMAC_STATUS_OK; + } + break; + case MOTE_MAC_NEW_CHANNEL_ANS: + if( MacCommandsBufferIndex < ( bufLen - 1 ) ) + { + MacCommandsBuffer[MacCommandsBufferIndex++] = cmd; + // Status: Datarate range OK, Channel frequency OK + MacCommandsBuffer[MacCommandsBufferIndex++] = p1; + status = LORAMAC_STATUS_OK; + } + break; + case MOTE_MAC_RX_TIMING_SETUP_ANS: + if( MacCommandsBufferIndex < bufLen ) + { + MacCommandsBuffer[MacCommandsBufferIndex++] = cmd; + // No payload for this answer + status = LORAMAC_STATUS_OK; + } + break; + case MOTE_MAC_TX_PARAM_SETUP_ANS: + if( MacCommandsBufferIndex < bufLen ) + { + MacCommandsBuffer[MacCommandsBufferIndex++] = cmd; + // No payload for this answer + status = LORAMAC_STATUS_OK; + } + break; + case MOTE_MAC_DL_CHANNEL_ANS: + if( MacCommandsBufferIndex < bufLen ) + { + MacCommandsBuffer[MacCommandsBufferIndex++] = cmd; + // Status: Uplink frequency exists, Channel frequency OK + MacCommandsBuffer[MacCommandsBufferIndex++] = p1; + status = LORAMAC_STATUS_OK; + } + break; + default: + return LORAMAC_STATUS_SERVICE_UNKNOWN; + } + if( status == LORAMAC_STATUS_OK ) + { + MacCommandsInNextTx = true; + } + return status; +} + +static uint8_t ParseMacCommandsToRepeat( uint8_t* cmdBufIn, uint8_t length, uint8_t* cmdBufOut ) +{ + uint8_t i = 0; + uint8_t cmdCount = 0; + + if( ( cmdBufIn == NULL ) || ( cmdBufOut == NULL ) ) + { + return 0; + } + + for( i = 0; i < length; i++ ) + { + switch( cmdBufIn[i] ) + { + // STICKY + case MOTE_MAC_DL_CHANNEL_ANS: + case MOTE_MAC_RX_PARAM_SETUP_ANS: + { // 1 byte payload + cmdBufOut[cmdCount++] = cmdBufIn[i++]; + cmdBufOut[cmdCount++] = cmdBufIn[i]; + break; + } + case MOTE_MAC_RX_TIMING_SETUP_ANS: + { // 0 byte payload + cmdBufOut[cmdCount++] = cmdBufIn[i]; + break; + } + // NON-STICKY + case MOTE_MAC_DEV_STATUS_ANS: + { // 2 bytes payload + i += 2; + break; + } + case MOTE_MAC_LINK_ADR_ANS: + case MOTE_MAC_NEW_CHANNEL_ANS: + { // 1 byte payload + i++; + break; + } + case MOTE_MAC_TX_PARAM_SETUP_ANS: + case MOTE_MAC_DUTY_CYCLE_ANS: + case MOTE_MAC_LINK_CHECK_REQ: + { // 0 byte payload + break; + } + default: + break; + } + } + + return cmdCount; +} + +static void ProcessMacCommands( uint8_t *payload, uint8_t macIndex, uint8_t commandsSize, uint8_t snr ) +{ + uint8_t status = 0; + + while( macIndex < commandsSize ) + { + // Decode Frame MAC commands + DPRINTF("Mac=%d\r\n", payload[macIndex]); + switch( payload[macIndex++] ) + { + case SRV_MAC_LINK_CHECK_ANS: + MlmeConfirm.Status = LORAMAC_EVENT_INFO_STATUS_OK; + MlmeConfirm.DemodMargin = payload[macIndex++]; + MlmeConfirm.NbGateways = payload[macIndex++]; + break; + case SRV_MAC_LINK_ADR_REQ: + { + LinkAdrReqParams_t linkAdrReq; + int8_t linkAdrDatarate = DR_0; + int8_t linkAdrTxPower = TX_POWER_0; + uint8_t linkAdrNbRep = 0; + uint8_t linkAdrNbBytesParsed = 0; + + // Fill parameter structure + linkAdrReq.Payload = &payload[macIndex - 1]; + linkAdrReq.PayloadSize = commandsSize - ( macIndex - 1 ); + linkAdrReq.AdrEnabled = AdrCtrlOn; + linkAdrReq.UplinkDwellTime = LoRaMacParams.UplinkDwellTime; + linkAdrReq.CurrentDatarate = LoRaMacParams.ChannelsDatarate; + linkAdrReq.CurrentTxPower = LoRaMacParams.ChannelsTxPower; + linkAdrReq.CurrentNbRep = LoRaMacParams.ChannelsNbRep; + + // Process the ADR requests + status = RegionLinkAdrReq( LoRaMacRegion, &linkAdrReq, &linkAdrDatarate, + &linkAdrTxPower, &linkAdrNbRep, &linkAdrNbBytesParsed ); + + if( ( status & 0x07 ) == 0x07 ) + { + LoRaMacParams.ChannelsDatarate = linkAdrDatarate; + LoRaMacParams.ChannelsTxPower = linkAdrTxPower; + LoRaMacParams.ChannelsNbRep = linkAdrNbRep; + } + + // Add the answers to the buffer + for( uint8_t i = 0; i < ( linkAdrNbBytesParsed / 5 ); i++ ) + { + AddMacCommand( MOTE_MAC_LINK_ADR_ANS, status, 0 ); + } + // Update MAC index + macIndex += linkAdrNbBytesParsed - 1; + } + break; + case SRV_MAC_DUTY_CYCLE_REQ: + MaxDCycle = payload[macIndex++]; + AggregatedDCycle = 1 << MaxDCycle; + AddMacCommand( MOTE_MAC_DUTY_CYCLE_ANS, 0, 0 ); + break; + case SRV_MAC_RX_PARAM_SETUP_REQ: + { + RxParamSetupReqParams_t rxParamSetupReq; + status = 0x07; + + rxParamSetupReq.DrOffset = ( payload[macIndex] >> 4 ) & 0x07; + rxParamSetupReq.Datarate = payload[macIndex] & 0x0F; + macIndex++; + + rxParamSetupReq.Frequency = ( uint32_t )payload[macIndex++]; + rxParamSetupReq.Frequency |= ( uint32_t )payload[macIndex++] << 8; + rxParamSetupReq.Frequency |= ( uint32_t )payload[macIndex++] << 16; + rxParamSetupReq.Frequency *= 100; + + // Perform request on region + status = RegionRxParamSetupReq( LoRaMacRegion, &rxParamSetupReq ); + + if( ( status & 0x07 ) == 0x07 ) + { + LoRaMacParams.Rx2Channel.Datarate = rxParamSetupReq.Datarate; + LoRaMacParams.Rx2Channel.Frequency = rxParamSetupReq.Frequency; + LoRaMacParams.Rx1DrOffset = rxParamSetupReq.DrOffset; + } + AddMacCommand( MOTE_MAC_RX_PARAM_SETUP_ANS, status, 0 ); + } + break; + case SRV_MAC_DEV_STATUS_REQ: + { + uint8_t batteryLevel = BAT_LEVEL_NO_MEASURE; + if( ( LoRaMacCallbacks != NULL ) && ( LoRaMacCallbacks->GetBatteryLevel != NULL ) ) + { + batteryLevel = LoRaMacCallbacks->GetBatteryLevel( ); + } + AddMacCommand( MOTE_MAC_DEV_STATUS_ANS, batteryLevel, snr ); + break; + } + case SRV_MAC_NEW_CHANNEL_REQ: + { + NewChannelReqParams_t newChannelReq; + ChannelParams_t chParam; + status = 0x03; + + newChannelReq.ChannelId = payload[macIndex++]; + newChannelReq.NewChannel = &chParam; + + chParam.Frequency = ( uint32_t )payload[macIndex++]; + chParam.Frequency |= ( uint32_t )payload[macIndex++] << 8; + chParam.Frequency |= ( uint32_t )payload[macIndex++] << 16; + chParam.Frequency *= 100; + chParam.Rx1Frequency = 0; + chParam.DrRange.Value = payload[macIndex++]; + + status = RegionNewChannelReq( LoRaMacRegion, &newChannelReq ); + + AddMacCommand( MOTE_MAC_NEW_CHANNEL_ANS, status, 0 ); + } + break; + case SRV_MAC_RX_TIMING_SETUP_REQ: + { + uint8_t delay = payload[macIndex++] & 0x0F; + + if( delay == 0 ) + { + delay++; + } + LoRaMacParams.ReceiveDelay1 = delay * 1000; + LoRaMacParams.ReceiveDelay2 = LoRaMacParams.ReceiveDelay1 + 1000; + AddMacCommand( MOTE_MAC_RX_TIMING_SETUP_ANS, 0, 0 ); + } + break; + case SRV_MAC_TX_PARAM_SETUP_REQ: + { + TxParamSetupReqParams_t txParamSetupReq; + uint8_t eirpDwellTime = payload[macIndex++]; + + txParamSetupReq.UplinkDwellTime = 0; + txParamSetupReq.DownlinkDwellTime = 0; + + if( ( eirpDwellTime & 0x20 ) == 0x20 ) + { + txParamSetupReq.DownlinkDwellTime = 1; + } + if( ( eirpDwellTime & 0x10 ) == 0x10 ) + { + txParamSetupReq.UplinkDwellTime = 1; + } + txParamSetupReq.MaxEirp = eirpDwellTime & 0x0F; + + // Check the status for correctness + if( RegionTxParamSetupReq( LoRaMacRegion, &txParamSetupReq ) != -1 ) + { + // Accept command + LoRaMacParams.UplinkDwellTime = txParamSetupReq.UplinkDwellTime; + LoRaMacParams.DownlinkDwellTime = txParamSetupReq.DownlinkDwellTime; + LoRaMacParams.MaxEirp = LoRaMacMaxEirpTable[txParamSetupReq.MaxEirp]; + // Add command response + AddMacCommand( MOTE_MAC_TX_PARAM_SETUP_ANS, 0, 0 ); + } + } + break; + case SRV_MAC_DL_CHANNEL_REQ: + { + DlChannelReqParams_t dlChannelReq; + status = 0x03; + + dlChannelReq.ChannelId = payload[macIndex++]; + dlChannelReq.Rx1Frequency = ( uint32_t )payload[macIndex++]; + dlChannelReq.Rx1Frequency |= ( uint32_t )payload[macIndex++] << 8; + dlChannelReq.Rx1Frequency |= ( uint32_t )payload[macIndex++] << 16; + dlChannelReq.Rx1Frequency *= 100; + + status = RegionDlChannelReq( LoRaMacRegion, &dlChannelReq ); + + AddMacCommand( MOTE_MAC_DL_CHANNEL_ANS, status, 0 ); + } + break; + default: + // Unknown command. ABORT MAC commands processing + return; + } + } +} + +LoRaMacStatus_t Send( LoRaMacHeader_t *macHdr, uint8_t fPort, void *fBuffer, uint16_t fBufferSize ) +{ + LoRaMacFrameCtrl_t fCtrl; + LoRaMacStatus_t status = LORAMAC_STATUS_PARAMETER_INVALID; + + fCtrl.Value = 0; + fCtrl.Bits.FOptsLen = 0; + fCtrl.Bits.FPending = 0; + fCtrl.Bits.Ack = false; + fCtrl.Bits.AdrAckReq = false; + fCtrl.Bits.Adr = AdrCtrlOn; + + // Prepare the frame + status = PrepareFrame( macHdr, &fCtrl, fPort, fBuffer, fBufferSize ); + + // Validate status + if( status != LORAMAC_STATUS_OK ) + { + return status; + } + + // Reset confirm parameters + McpsConfirm.NbRetries = 0; + McpsConfirm.AckReceived = false; + McpsConfirm.UpLinkCounter = UpLinkCounter; + + status = ScheduleTx( ); + + return status; +} + +static LoRaMacStatus_t ScheduleTx( void ) +{ + TimerTime_t dutyCycleTimeOff = 0; + NextChanParams_t nextChan; + + // Check if the device is off + if( MaxDCycle == 255 ) + { + return LORAMAC_STATUS_DEVICE_OFF; + } + if( MaxDCycle == 0 ) + { + AggregatedTimeOff = 0; + } + + // Update Backoff + CalculateBackOff( LastTxChannel ); + + nextChan.AggrTimeOff = AggregatedTimeOff; + nextChan.Datarate = LoRaMacParams.ChannelsDatarate; + nextChan.DutyCycleEnabled = DutyCycleOn; + nextChan.Joined = IsLoRaMacNetworkJoined; + nextChan.LastAggrTx = AggregatedLastTxDoneTime; + + // Select channel + while( RegionNextChannel( LoRaMacRegion, &nextChan, &Channel, &dutyCycleTimeOff, &AggregatedTimeOff ) == false ) + { + // Set the default datarate + LoRaMacParams.ChannelsDatarate = LoRaMacParamsDefaults.ChannelsDatarate; + // Update datarate in the function parameters + nextChan.Datarate = LoRaMacParams.ChannelsDatarate; + } + + // Compute Rx1 windows parameters + RegionComputeRxWindowParameters( LoRaMacRegion, + RegionApplyDrOffset( LoRaMacRegion, LoRaMacParams.DownlinkDwellTime, LoRaMacParams.ChannelsDatarate, LoRaMacParams.Rx1DrOffset ), + LoRaMacParams.MinRxSymbols, + LoRaMacParams.SystemMaxRxError, + &RxWindow1Config ); + // Compute Rx2 windows parameters + RegionComputeRxWindowParameters( LoRaMacRegion, + LoRaMacParams.Rx2Channel.Datarate, + LoRaMacParams.MinRxSymbols, + LoRaMacParams.SystemMaxRxError, + &RxWindow2Config ); + + if( IsLoRaMacNetworkJoined == false ) + { + RxWindow1Delay = LoRaMacParams.JoinAcceptDelay1 + RxWindow1Config.WindowOffset; + RxWindow2Delay = LoRaMacParams.JoinAcceptDelay2 + RxWindow2Config.WindowOffset; + } + else + { + if( ValidatePayloadLength( LoRaMacTxPayloadLen, LoRaMacParams.ChannelsDatarate, MacCommandsBufferIndex ) == false ) + { + return LORAMAC_STATUS_LENGTH_ERROR; + } + RxWindow1Delay = LoRaMacParams.ReceiveDelay1 + RxWindow1Config.WindowOffset; + RxWindow2Delay = LoRaMacParams.ReceiveDelay2 + RxWindow2Config.WindowOffset; + } + + // Schedule transmission of frame + if( dutyCycleTimeOff == 0 ) + { + // Try to send now + return SendFrameOnChannel( Channel ); + } + else + { + // Send later - prepare timer + LoRaMacState |= LORAMAC_TX_DELAYED; + TimerSetValue( &TxDelayedTimer, dutyCycleTimeOff ); + TimerStart( &TxDelayedTimer ); + + return LORAMAC_STATUS_OK; + } +} + +static void CalculateBackOff( uint8_t channel ) +{ + CalcBackOffParams_t calcBackOff; + + calcBackOff.Joined = IsLoRaMacNetworkJoined; + calcBackOff.DutyCycleEnabled = DutyCycleOn; + calcBackOff.Channel = channel; + calcBackOff.ElapsedTime = TimerGetElapsedTime( LoRaMacInitializationTime ); + calcBackOff.TxTimeOnAir = TxTimeOnAir; + calcBackOff.LastTxIsJoinRequest = LastTxIsJoinRequest; + + // Update regional back-off + RegionCalcBackOff( LoRaMacRegion, &calcBackOff ); + + // Update aggregated time-off + AggregatedTimeOff = AggregatedTimeOff + ( TxTimeOnAir * AggregatedDCycle - TxTimeOnAir ); +} + +static void ResetMacParameters( void ) +{ + IsLoRaMacNetworkJoined = false; + + // Counters + UpLinkCounter = 0; + DownLinkCounter = 0; + AdrAckCounter = 0; + + ChannelsNbRepCounter = 0; + + AckTimeoutRetries = 1; + AckTimeoutRetriesCounter = 1; + AckTimeoutRetry = false; + + MaxDCycle = 0; + AggregatedDCycle = 1; + + MacCommandsBufferIndex = 0; + MacCommandsBufferToRepeatIndex = 0; + + IsRxWindowsEnabled = true; + + LoRaMacParams.ChannelsTxPower = LoRaMacParamsDefaults.ChannelsTxPower; + LoRaMacParams.ChannelsDatarate = LoRaMacParamsDefaults.ChannelsDatarate; + LoRaMacParams.Rx1DrOffset = LoRaMacParamsDefaults.Rx1DrOffset; + LoRaMacParams.Rx2Channel = LoRaMacParamsDefaults.Rx2Channel; + LoRaMacParams.UplinkDwellTime = LoRaMacParamsDefaults.UplinkDwellTime; + LoRaMacParams.DownlinkDwellTime = LoRaMacParamsDefaults.DownlinkDwellTime; + LoRaMacParams.MaxEirp = LoRaMacParamsDefaults.MaxEirp; + LoRaMacParams.AntennaGain = LoRaMacParamsDefaults.AntennaGain; + + NodeAckRequested = false; + SrvAckRequested = false; + MacCommandsInNextTx = false; + + // Reset Multicast downlink counters + MulticastParams_t *cur = MulticastChannels; + while( cur != NULL ) + { + cur->DownLinkCounter = 0; + cur = cur->Next; + } + + // Initialize channel index. + Channel = 0; + LastTxChannel = Channel; +} + +LoRaMacStatus_t PrepareFrame( LoRaMacHeader_t *macHdr, LoRaMacFrameCtrl_t *fCtrl, uint8_t fPort, void *fBuffer, uint16_t fBufferSize ) +{ + AdrNextParams_t adrNext; + uint16_t i; + uint8_t pktHeaderLen = 0; + uint32_t mic = 0; + const void* payload = fBuffer; + uint8_t framePort = fPort; + + LoRaMacBufferPktLen = 0; + + NodeAckRequested = false; + + if( fBuffer == NULL ) + { + fBufferSize = 0; + } + + LoRaMacTxPayloadLen = fBufferSize; + + LoRaMacBuffer[pktHeaderLen++] = macHdr->Value; + + switch( macHdr->Bits.MType ) + { + case FRAME_TYPE_JOIN_REQ: + LoRaMacBufferPktLen = pktHeaderLen; + + memcpyr( LoRaMacBuffer + LoRaMacBufferPktLen, LoRaMacAppEui, 8 ); + LoRaMacBufferPktLen += 8; + memcpyr( LoRaMacBuffer + LoRaMacBufferPktLen, LoRaMacDevEui, 8 ); + LoRaMacBufferPktLen += 8; + + LoRaMacDevNonce = Radio.Random( ); + + LoRaMacBuffer[LoRaMacBufferPktLen++] = LoRaMacDevNonce & 0xFF; + LoRaMacBuffer[LoRaMacBufferPktLen++] = ( LoRaMacDevNonce >> 8 ) & 0xFF; + + LoRaMacJoinComputeMic( LoRaMacBuffer, LoRaMacBufferPktLen & 0xFF, LoRaMacAppKey, &mic ); + + LoRaMacBuffer[LoRaMacBufferPktLen++] = mic & 0xFF; + LoRaMacBuffer[LoRaMacBufferPktLen++] = ( mic >> 8 ) & 0xFF; + LoRaMacBuffer[LoRaMacBufferPktLen++] = ( mic >> 16 ) & 0xFF; + LoRaMacBuffer[LoRaMacBufferPktLen++] = ( mic >> 24 ) & 0xFF; + + break; + case FRAME_TYPE_DATA_CONFIRMED_UP: + NodeAckRequested = true; + //Intentional fallthrough + case FRAME_TYPE_DATA_UNCONFIRMED_UP: + if( IsLoRaMacNetworkJoined == false ) + { + return LORAMAC_STATUS_NO_NETWORK_JOINED; // No network has been joined yet + } + + // Adr next request + adrNext.UpdateChanMask = true; + adrNext.AdrEnabled = fCtrl->Bits.Adr; + adrNext.AdrAckCounter = AdrAckCounter; + adrNext.Datarate = LoRaMacParams.ChannelsDatarate; + adrNext.TxPower = LoRaMacParams.ChannelsTxPower; + adrNext.UplinkDwellTime = LoRaMacParams.UplinkDwellTime; + + fCtrl->Bits.AdrAckReq = RegionAdrNext( LoRaMacRegion, &adrNext, + &LoRaMacParams.ChannelsDatarate, &LoRaMacParams.ChannelsTxPower, &AdrAckCounter ); + + if( SrvAckRequested == true ) + { + SrvAckRequested = false; + fCtrl->Bits.Ack = 1; + } + + LoRaMacBuffer[pktHeaderLen++] = ( LoRaMacDevAddr ) & 0xFF; + LoRaMacBuffer[pktHeaderLen++] = ( LoRaMacDevAddr >> 8 ) & 0xFF; + LoRaMacBuffer[pktHeaderLen++] = ( LoRaMacDevAddr >> 16 ) & 0xFF; + LoRaMacBuffer[pktHeaderLen++] = ( LoRaMacDevAddr >> 24 ) & 0xFF; + + LoRaMacBuffer[pktHeaderLen++] = fCtrl->Value; + + LoRaMacBuffer[pktHeaderLen++] = UpLinkCounter & 0xFF; + LoRaMacBuffer[pktHeaderLen++] = ( UpLinkCounter >> 8 ) & 0xFF; + + // Copy the MAC commands which must be re-send into the MAC command buffer + memcpy1( &MacCommandsBuffer[MacCommandsBufferIndex], MacCommandsBufferToRepeat, MacCommandsBufferToRepeatIndex ); + MacCommandsBufferIndex += MacCommandsBufferToRepeatIndex; + + if( ( payload != NULL ) && ( LoRaMacTxPayloadLen > 0 ) ) + { + if( MacCommandsInNextTx == true ) + { + if( MacCommandsBufferIndex <= LORA_MAC_COMMAND_MAX_FOPTS_LENGTH ) + { + fCtrl->Bits.FOptsLen += MacCommandsBufferIndex; + + // Update FCtrl field with new value of OptionsLength + LoRaMacBuffer[0x05] = fCtrl->Value; + for( i = 0; i < MacCommandsBufferIndex; i++ ) + { + LoRaMacBuffer[pktHeaderLen++] = MacCommandsBuffer[i]; + } + } + else + { + LoRaMacTxPayloadLen = MacCommandsBufferIndex; + payload = MacCommandsBuffer; + framePort = 0; + } + } + } + else + { + if( ( MacCommandsBufferIndex > 0 ) && ( MacCommandsInNextTx == true ) ) + { + LoRaMacTxPayloadLen = MacCommandsBufferIndex; + payload = MacCommandsBuffer; + framePort = 0; + } + } + MacCommandsInNextTx = false; + // Store MAC commands which must be re-send in case the device does not receive a downlink anymore + MacCommandsBufferToRepeatIndex = ParseMacCommandsToRepeat( MacCommandsBuffer, MacCommandsBufferIndex, MacCommandsBufferToRepeat ); + if( MacCommandsBufferToRepeatIndex > 0 ) + { + MacCommandsInNextTx = true; + } + + if( ( payload != NULL ) && ( LoRaMacTxPayloadLen > 0 ) ) + { + LoRaMacBuffer[pktHeaderLen++] = framePort; + + if( framePort == 0 ) + { + // Reset buffer index as the mac commands are being sent on port 0 + MacCommandsBufferIndex = 0; + LoRaMacPayloadEncrypt( (uint8_t* ) payload, LoRaMacTxPayloadLen, LoRaMacNwkSKey, LoRaMacDevAddr, UP_LINK, UpLinkCounter, &LoRaMacBuffer[pktHeaderLen] ); + } + else + { + LoRaMacPayloadEncrypt( (uint8_t* ) payload, LoRaMacTxPayloadLen, LoRaMacAppSKey, LoRaMacDevAddr, UP_LINK, UpLinkCounter, &LoRaMacBuffer[pktHeaderLen] ); + } + } + LoRaMacBufferPktLen = pktHeaderLen + LoRaMacTxPayloadLen; + + LoRaMacComputeMic( LoRaMacBuffer, LoRaMacBufferPktLen, LoRaMacNwkSKey, LoRaMacDevAddr, UP_LINK, UpLinkCounter, &mic ); + + LoRaMacBuffer[LoRaMacBufferPktLen + 0] = mic & 0xFF; + LoRaMacBuffer[LoRaMacBufferPktLen + 1] = ( mic >> 8 ) & 0xFF; + LoRaMacBuffer[LoRaMacBufferPktLen + 2] = ( mic >> 16 ) & 0xFF; + LoRaMacBuffer[LoRaMacBufferPktLen + 3] = ( mic >> 24 ) & 0xFF; + + LoRaMacBufferPktLen += LORAMAC_MFR_LEN; + + break; + case FRAME_TYPE_PROPRIETARY: + if( ( fBuffer != NULL ) && ( LoRaMacTxPayloadLen > 0 ) ) + { + memcpy1( LoRaMacBuffer + pktHeaderLen, ( uint8_t* ) fBuffer, LoRaMacTxPayloadLen ); + LoRaMacBufferPktLen = pktHeaderLen + LoRaMacTxPayloadLen; + } + break; + default: + return LORAMAC_STATUS_SERVICE_UNKNOWN; + } + + return LORAMAC_STATUS_OK; +} + +LoRaMacStatus_t SendFrameOnChannel( uint8_t channel ) +{ + TxConfigParams_t txConfig; + int8_t txPower = 0; + + txConfig.Channel = channel; + txConfig.Datarate = LoRaMacParams.ChannelsDatarate; + txConfig.TxPower = LoRaMacParams.ChannelsTxPower; + txConfig.MaxEirp = LoRaMacParams.MaxEirp; + txConfig.AntennaGain = LoRaMacParams.AntennaGain; + txConfig.PktLen = LoRaMacBufferPktLen; + + RegionTxConfig( LoRaMacRegion, &txConfig, &txPower, &TxTimeOnAir ); + + MlmeConfirm.Status = LORAMAC_EVENT_INFO_STATUS_ERROR; + McpsConfirm.Status = LORAMAC_EVENT_INFO_STATUS_ERROR; + McpsConfirm.Datarate = LoRaMacParams.ChannelsDatarate; + McpsConfirm.TxPower = txPower; + + // Store the time on air + McpsConfirm.TxTimeOnAir = TxTimeOnAir; + MlmeConfirm.TxTimeOnAir = TxTimeOnAir; + + // Starts the MAC layer status check timer + TimerSetValue( &MacStateCheckTimer, MAC_STATE_CHECK_TIMEOUT ); + TimerStart( &MacStateCheckTimer ); + + if( IsLoRaMacNetworkJoined == false ) + { + JoinRequestTrials++; + } + + // Send now + Radio.Send( LoRaMacBuffer, LoRaMacBufferPktLen ); + + LoRaMacState |= LORAMAC_TX_RUNNING; + + return LORAMAC_STATUS_OK; +} + +LoRaMacStatus_t SetTxContinuousWave( uint16_t timeout ) +{ + ContinuousWaveParams_t continuousWave; + + continuousWave.Channel = Channel; + continuousWave.Datarate = LoRaMacParams.ChannelsDatarate; + continuousWave.TxPower = LoRaMacParams.ChannelsTxPower; + continuousWave.MaxEirp = LoRaMacParams.MaxEirp; + continuousWave.AntennaGain = LoRaMacParams.AntennaGain; + continuousWave.Timeout = timeout; + + RegionSetContinuousWave( LoRaMacRegion, &continuousWave ); + + // Starts the MAC layer status check timer + TimerSetValue( &MacStateCheckTimer, MAC_STATE_CHECK_TIMEOUT ); + TimerStart( &MacStateCheckTimer ); + + LoRaMacState |= LORAMAC_TX_RUNNING; + + return LORAMAC_STATUS_OK; +} + +LoRaMacStatus_t SetTxContinuousWave1( uint16_t timeout, uint32_t frequency, uint8_t power ) +{ + Radio.SetTxContinuousWave( frequency, power, timeout ); + + // Starts the MAC layer status check timer + TimerSetValue( &MacStateCheckTimer, MAC_STATE_CHECK_TIMEOUT ); + TimerStart( &MacStateCheckTimer ); + + LoRaMacState |= LORAMAC_TX_RUNNING; + + return LORAMAC_STATUS_OK; +} + +char* rw_Region2Str(LoRaMacRegion_t region) +{ + switch(region) { + case LORAMAC_REGION_AS923: return "AS923"; + case LORAMAC_REGION_AU915: return "AU915"; + case LORAMAC_REGION_CN470: return "CN470"; + case LORAMAC_REGION_CN779: return "CN779"; + case LORAMAC_REGION_EU433: return "EU433"; + case LORAMAC_REGION_EU868: return "EU868"; + case LORAMAC_REGION_KR920: return "KR920"; + case LORAMAC_REGION_IN865: return "IN865"; + case LORAMAC_REGION_US915: return "US915"; + case LORAMAC_REGION_US915_HYBRID: return "US915_H"; + default: + return ""; + } +} + +LoRaMacStatus_t LoRaMacInitialization( LoRaMacPrimitives_t *primitives, LoRaMacCallback_t *callbacks, LoRaMacRegion_t region ) +{ + GetPhyParams_t getPhy; + PhyParam_t phyParam; + + if( primitives == NULL ) + { + return LORAMAC_STATUS_PARAMETER_INVALID; + } + + if( ( primitives->MacMcpsConfirm == NULL ) || + ( primitives->MacMcpsIndication == NULL ) || + ( primitives->MacMlmeConfirm == NULL ) ) + { + return LORAMAC_STATUS_PARAMETER_INVALID; + } + // Verify if the region is supported + printf("\r\nSelected LoraWAN 1.0.2 Region: %s \r\n\r\n", rw_Region2Str(region)); + if( RegionIsActive( region ) == false ) + { + return LORAMAC_STATUS_REGION_NOT_SUPPORTED; + } + + LoRaMacPrimitives = primitives; + LoRaMacCallbacks = callbacks; + LoRaMacRegion = region; + + LoRaMacFlags.Value = 0; + + LoRaMacDeviceClass = CLASS_A; + LoRaMacState = LORAMAC_IDLE; + + JoinRequestTrials = 0; + MaxJoinRequestTrials = 1; + RepeaterSupport = false; + + // Reset duty cycle times + AggregatedLastTxDoneTime = 0; + AggregatedTimeOff = 0; + + // Reset to defaults + getPhy.Attribute = PHY_DUTY_CYCLE; + phyParam = RegionGetPhyParam( LoRaMacRegion, &getPhy ); + DutyCycleOn = ( bool ) phyParam.Value; + + getPhy.Attribute = PHY_DEF_TX_POWER; + phyParam = RegionGetPhyParam( LoRaMacRegion, &getPhy ); + LoRaMacParamsDefaults.ChannelsTxPower = phyParam.Value; + + getPhy.Attribute = PHY_DEF_TX_DR; + phyParam = RegionGetPhyParam( LoRaMacRegion, &getPhy ); + LoRaMacParamsDefaults.ChannelsDatarate = phyParam.Value; + + getPhy.Attribute = PHY_MAX_RX_WINDOW; + phyParam = RegionGetPhyParam( LoRaMacRegion, &getPhy ); + LoRaMacParamsDefaults.MaxRxWindow = phyParam.Value; + + getPhy.Attribute = PHY_RECEIVE_DELAY1; + phyParam = RegionGetPhyParam( LoRaMacRegion, &getPhy ); + LoRaMacParamsDefaults.ReceiveDelay1 = phyParam.Value; + + getPhy.Attribute = PHY_RECEIVE_DELAY2; + phyParam = RegionGetPhyParam( LoRaMacRegion, &getPhy ); + LoRaMacParamsDefaults.ReceiveDelay2 = phyParam.Value; + + getPhy.Attribute = PHY_JOIN_ACCEPT_DELAY1; + phyParam = RegionGetPhyParam( LoRaMacRegion, &getPhy ); + LoRaMacParamsDefaults.JoinAcceptDelay1 = phyParam.Value; + + getPhy.Attribute = PHY_JOIN_ACCEPT_DELAY2; + phyParam = RegionGetPhyParam( LoRaMacRegion, &getPhy ); + LoRaMacParamsDefaults.JoinAcceptDelay2 = phyParam.Value; + + getPhy.Attribute = PHY_DEF_DR1_OFFSET; + phyParam = RegionGetPhyParam( LoRaMacRegion, &getPhy ); + LoRaMacParamsDefaults.Rx1DrOffset = phyParam.Value; + + getPhy.Attribute = PHY_DEF_RX2_FREQUENCY; + phyParam = RegionGetPhyParam( LoRaMacRegion, &getPhy ); + LoRaMacParamsDefaults.Rx2Channel.Frequency = phyParam.Value; + + getPhy.Attribute = PHY_DEF_RX2_DR; + phyParam = RegionGetPhyParam( LoRaMacRegion, &getPhy ); + LoRaMacParamsDefaults.Rx2Channel.Datarate = phyParam.Value; + + getPhy.Attribute = PHY_DEF_UPLINK_DWELL_TIME; + phyParam = RegionGetPhyParam( LoRaMacRegion, &getPhy ); + LoRaMacParamsDefaults.UplinkDwellTime = phyParam.Value; + + getPhy.Attribute = PHY_DEF_DOWNLINK_DWELL_TIME; + phyParam = RegionGetPhyParam( LoRaMacRegion, &getPhy ); + LoRaMacParamsDefaults.DownlinkDwellTime = phyParam.Value; + + getPhy.Attribute = PHY_DEF_MAX_EIRP; + phyParam = RegionGetPhyParam( LoRaMacRegion, &getPhy ); + LoRaMacParamsDefaults.MaxEirp = phyParam.fValue; + + getPhy.Attribute = PHY_DEF_ANTENNA_GAIN; + phyParam = RegionGetPhyParam( LoRaMacRegion, &getPhy ); + LoRaMacParamsDefaults.AntennaGain = phyParam.fValue; + + RegionInitDefaults( LoRaMacRegion, INIT_TYPE_INIT ); + + // Init parameters which are not set in function ResetMacParameters + LoRaMacParamsDefaults.ChannelsNbRep = 1; + LoRaMacParamsDefaults.SystemMaxRxError = 10; + LoRaMacParamsDefaults.MinRxSymbols = 6; + + LoRaMacParams.SystemMaxRxError = LoRaMacParamsDefaults.SystemMaxRxError; + LoRaMacParams.MinRxSymbols = LoRaMacParamsDefaults.MinRxSymbols; + LoRaMacParams.MaxRxWindow = LoRaMacParamsDefaults.MaxRxWindow; + LoRaMacParams.ReceiveDelay1 = LoRaMacParamsDefaults.ReceiveDelay1; + LoRaMacParams.ReceiveDelay2 = LoRaMacParamsDefaults.ReceiveDelay2; + LoRaMacParams.JoinAcceptDelay1 = LoRaMacParamsDefaults.JoinAcceptDelay1; + LoRaMacParams.JoinAcceptDelay2 = LoRaMacParamsDefaults.JoinAcceptDelay2; + LoRaMacParams.ChannelsNbRep = LoRaMacParamsDefaults.ChannelsNbRep; + + ResetMacParameters( ); + + // Initialize timers + TimerInit( &MacStateCheckTimer, OnMacStateCheckTimerEvent ); + TimerSetValue( &MacStateCheckTimer, MAC_STATE_CHECK_TIMEOUT ); + + TimerInit( &TxDelayedTimer, OnTxDelayedTimerEvent ); + TimerInit( &RxWindowTimer1, OnRxWindow1TimerEvent ); + TimerInit( &RxWindowTimer2, OnRxWindow2TimerEvent ); + TimerInit( &AckTimeoutTimer, OnAckTimeoutTimerEvent ); + + // Store the current initialization time + LoRaMacInitializationTime = TimerGetCurrentTime( ); + + // Initialize Radio driver + RadioEvents.TxDone = OnRadioTxDone; + RadioEvents.RxDone = OnRadioRxDone; + RadioEvents.RxError = OnRadioRxError; + RadioEvents.TxTimeout = OnRadioTxTimeout; + RadioEvents.RxTimeout = OnRadioRxTimeout; + Radio.Init( &RadioEvents ); + + // Random seed initialization + srand1( Radio.Random( ) ); + + PublicNetwork = true; + Radio.SetPublicNetwork( PublicNetwork ); + Radio.Sleep( ); + + return LORAMAC_STATUS_OK; +} + +LoRaMacStatus_t LoRaMacQueryTxPossible( uint8_t size, LoRaMacTxInfo_t* txInfo ) +{ + AdrNextParams_t adrNext; + GetPhyParams_t getPhy; + PhyParam_t phyParam; + int8_t datarate = LoRaMacParamsDefaults.ChannelsDatarate; + int8_t txPower = LoRaMacParamsDefaults.ChannelsTxPower; + uint8_t fOptLen = MacCommandsBufferIndex + MacCommandsBufferToRepeatIndex; + + if( txInfo == NULL ) + { + return LORAMAC_STATUS_PARAMETER_INVALID; + } + + // Setup ADR request + adrNext.UpdateChanMask = false; + adrNext.AdrEnabled = AdrCtrlOn; + adrNext.AdrAckCounter = AdrAckCounter; + adrNext.Datarate = LoRaMacParams.ChannelsDatarate; + adrNext.TxPower = LoRaMacParams.ChannelsTxPower; + adrNext.UplinkDwellTime = LoRaMacParams.UplinkDwellTime; + + // We call the function for information purposes only. We don't want to + // apply the datarate, the tx power and the ADR ack counter. + RegionAdrNext( LoRaMacRegion, &adrNext, &datarate, &txPower, &AdrAckCounter ); + + // Setup PHY request + getPhy.UplinkDwellTime = LoRaMacParams.UplinkDwellTime; + getPhy.Datarate = datarate; + getPhy.Attribute = PHY_MAX_PAYLOAD; + + // Change request in case repeater is supported + if( RepeaterSupport == true ) + { + getPhy.Attribute = PHY_MAX_PAYLOAD_REPEATER; + } + phyParam = RegionGetPhyParam( LoRaMacRegion, &getPhy ); + txInfo->CurrentPayloadSize = phyParam.Value; + + // Verify if the fOpts fit into the maximum payload + if( txInfo->CurrentPayloadSize >= fOptLen ) + { + txInfo->MaxPossiblePayload = txInfo->CurrentPayloadSize - fOptLen; + } + else + { + txInfo->MaxPossiblePayload = txInfo->CurrentPayloadSize; + // The fOpts don't fit into the maximum payload. Omit the MAC commands to + // ensure that another uplink is possible. + fOptLen = 0; + MacCommandsBufferIndex = 0; + MacCommandsBufferToRepeatIndex = 0; + } + + // Verify if the fOpts and the payload fit into the maximum payload + if( ValidatePayloadLength( size, datarate, fOptLen ) == false ) + { + return LORAMAC_STATUS_LENGTH_ERROR; + } + return LORAMAC_STATUS_OK; +} + +LoRaMacStatus_t LoRaMacMibGetRequestConfirm( MibRequestConfirm_t *mibGet ) +{ + LoRaMacStatus_t status = LORAMAC_STATUS_OK; + GetPhyParams_t getPhy; + PhyParam_t phyParam; + + if( mibGet == NULL ) + { + return LORAMAC_STATUS_PARAMETER_INVALID; + } + + switch( mibGet->Type ) + { + case MIB_DEVICE_CLASS: + { + mibGet->Param.Class = LoRaMacDeviceClass; + break; + } + case MIB_NETWORK_JOINED: + { + mibGet->Param.IsNetworkJoined = IsLoRaMacNetworkJoined; + break; + } + case MIB_ADR: + { + mibGet->Param.AdrEnable = AdrCtrlOn; + break; + } + case MIB_NET_ID: + { + mibGet->Param.NetID = LoRaMacNetID; + break; + } + case MIB_DEV_ADDR: + { + mibGet->Param.DevAddr = LoRaMacDevAddr; + break; + } + case MIB_NWK_SKEY: + { + mibGet->Param.NwkSKey = LoRaMacNwkSKey; + break; + } + case MIB_APP_SKEY: + { + mibGet->Param.AppSKey = LoRaMacAppSKey; + break; + } + case MIB_PUBLIC_NETWORK: + { + mibGet->Param.EnablePublicNetwork = PublicNetwork; + break; + } + case MIB_REPEATER_SUPPORT: + { + mibGet->Param.EnableRepeaterSupport = RepeaterSupport; + break; + } + case MIB_CHANNELS: + { + getPhy.Attribute = PHY_CHANNELS; + phyParam = RegionGetPhyParam( LoRaMacRegion, &getPhy ); + + mibGet->Param.ChannelList = phyParam.Channels; + break; + } + case MIB_RX2_CHANNEL: + { + mibGet->Param.Rx2Channel = LoRaMacParams.Rx2Channel; + break; + } + case MIB_RX2_DEFAULT_CHANNEL: + { + mibGet->Param.Rx2Channel = LoRaMacParamsDefaults.Rx2Channel; + break; + } + case MIB_CHANNELS_DEFAULT_MASK: + { + getPhy.Attribute = PHY_CHANNELS_DEFAULT_MASK; + phyParam = RegionGetPhyParam( LoRaMacRegion, &getPhy ); + + mibGet->Param.ChannelsDefaultMask = phyParam.ChannelsMask; + break; + } + case MIB_CHANNELS_MASK: + { + getPhy.Attribute = PHY_CHANNELS_MASK; + phyParam = RegionGetPhyParam( LoRaMacRegion, &getPhy ); + + mibGet->Param.ChannelsMask = phyParam.ChannelsMask; + break; + } + case MIB_CHANNELS_NB_REP: + { + mibGet->Param.ChannelNbRep = LoRaMacParams.ChannelsNbRep; + break; + } + case MIB_MAX_RX_WINDOW_DURATION: + { + mibGet->Param.MaxRxWindow = LoRaMacParams.MaxRxWindow; + break; + } + case MIB_RECEIVE_DELAY_1: + { + mibGet->Param.ReceiveDelay1 = LoRaMacParams.ReceiveDelay1; + break; + } + case MIB_RECEIVE_DELAY_2: + { + mibGet->Param.ReceiveDelay2 = LoRaMacParams.ReceiveDelay2; + break; + } + case MIB_JOIN_ACCEPT_DELAY_1: + { + mibGet->Param.JoinAcceptDelay1 = LoRaMacParams.JoinAcceptDelay1; + break; + } + case MIB_JOIN_ACCEPT_DELAY_2: + { + mibGet->Param.JoinAcceptDelay2 = LoRaMacParams.JoinAcceptDelay2; + break; + } + case MIB_CHANNELS_DEFAULT_DATARATE: + { + mibGet->Param.ChannelsDefaultDatarate = LoRaMacParamsDefaults.ChannelsDatarate; + break; + } + case MIB_CHANNELS_DATARATE: + { + mibGet->Param.ChannelsDatarate = LoRaMacParams.ChannelsDatarate; + break; + } + case MIB_CHANNELS_DEFAULT_TX_POWER: + { + mibGet->Param.ChannelsDefaultTxPower = LoRaMacParamsDefaults.ChannelsTxPower; + break; + } + case MIB_CHANNELS_TX_POWER: + { + mibGet->Param.ChannelsTxPower = LoRaMacParams.ChannelsTxPower; + break; + } + case MIB_UPLINK_COUNTER: + { + mibGet->Param.UpLinkCounter = UpLinkCounter; + break; + } + case MIB_DOWNLINK_COUNTER: + { + mibGet->Param.DownLinkCounter = DownLinkCounter; + break; + } + case MIB_MULTICAST_CHANNEL: + { + mibGet->Param.MulticastList = MulticastChannels; + break; + } + case MIB_SYSTEM_MAX_RX_ERROR: + { + mibGet->Param.SystemMaxRxError = LoRaMacParams.SystemMaxRxError; + break; + } + case MIB_MIN_RX_SYMBOLS: + { + mibGet->Param.MinRxSymbols = LoRaMacParams.MinRxSymbols; + break; + } + case MIB_ANTENNA_GAIN: + { + mibGet->Param.AntennaGain = LoRaMacParams.AntennaGain; + break; + } + default: + status = LORAMAC_STATUS_SERVICE_UNKNOWN; + break; + } + + return status; +} + +LoRaMacStatus_t LoRaMacMibSetRequestConfirm( MibRequestConfirm_t *mibSet ) +{ + LoRaMacStatus_t status = LORAMAC_STATUS_OK; + ChanMaskSetParams_t chanMaskSet; + VerifyParams_t verify; + + if( mibSet == NULL ) + { + return LORAMAC_STATUS_PARAMETER_INVALID; + } + if( ( LoRaMacState & LORAMAC_TX_RUNNING ) == LORAMAC_TX_RUNNING ) + { + return LORAMAC_STATUS_BUSY; + } + + switch( mibSet->Type ) + { + case MIB_DEVICE_CLASS: + { + LoRaMacDeviceClass = mibSet->Param.Class; + switch( LoRaMacDeviceClass ) + { + case CLASS_A: + { + // Set the radio into sleep to setup a defined state + Radio.Sleep( ); + break; + } + case CLASS_B: + { + break; + } + case CLASS_C: + { + // Set the NodeAckRequested indicator to default + NodeAckRequested = false; + OnRxWindow2TimerEvent( ); + break; + } + } + break; + } + case MIB_NETWORK_JOINED: + { + IsLoRaMacNetworkJoined = mibSet->Param.IsNetworkJoined; + break; + } + case MIB_ADR: + { + AdrCtrlOn = mibSet->Param.AdrEnable; + break; + } + case MIB_NET_ID: + { + LoRaMacNetID = mibSet->Param.NetID; + break; + } + case MIB_DEV_ADDR: + { + LoRaMacDevAddr = mibSet->Param.DevAddr; + break; + } + case MIB_NWK_SKEY: + { + if( mibSet->Param.NwkSKey != NULL ) + { + memcpy1( LoRaMacNwkSKey, mibSet->Param.NwkSKey, + sizeof( LoRaMacNwkSKey ) ); + } + else + { + status = LORAMAC_STATUS_PARAMETER_INVALID; + } + break; + } + case MIB_APP_SKEY: + { + if( mibSet->Param.AppSKey != NULL ) + { + memcpy1( LoRaMacAppSKey, mibSet->Param.AppSKey, + sizeof( LoRaMacAppSKey ) ); + } + else + { + status = LORAMAC_STATUS_PARAMETER_INVALID; + } + break; + } + case MIB_PUBLIC_NETWORK: + { + PublicNetwork = mibSet->Param.EnablePublicNetwork; + Radio.SetPublicNetwork( PublicNetwork ); + break; + } + case MIB_REPEATER_SUPPORT: + { + RepeaterSupport = mibSet->Param.EnableRepeaterSupport; + break; + } + case MIB_RX2_CHANNEL: + { + verify.DatarateParams.Datarate = mibSet->Param.Rx2Channel.Datarate; + verify.DatarateParams.DownlinkDwellTime = LoRaMacParams.DownlinkDwellTime; + + if( RegionVerify( LoRaMacRegion, &verify, PHY_RX_DR ) == true ) + { + LoRaMacParams.Rx2Channel = mibSet->Param.Rx2Channel; + + if( ( LoRaMacDeviceClass == CLASS_C ) && ( IsLoRaMacNetworkJoined == true ) ) + { + // Compute Rx2 windows parameters + RegionComputeRxWindowParameters( LoRaMacRegion, + LoRaMacParams.Rx2Channel.Datarate, + LoRaMacParams.MinRxSymbols, + LoRaMacParams.SystemMaxRxError, + &RxWindow2Config ); + + RxWindow2Config.Channel = Channel; + RxWindow2Config.Frequency = LoRaMacParams.Rx2Channel.Frequency; + RxWindow2Config.DownlinkDwellTime = LoRaMacParams.DownlinkDwellTime; + RxWindow2Config.RepeaterSupport = RepeaterSupport; + RxWindow2Config.Window = 1; + RxWindow2Config.RxContinuous = true; + + if( RegionRxConfig( LoRaMacRegion, &RxWindow2Config, ( int8_t* )&McpsIndication.RxDatarate ) == true ) + { + RxWindowSetup( RxWindow2Config.RxContinuous, LoRaMacParams.MaxRxWindow ); + RxSlot = RxWindow2Config.Window; + } + else + { + status = LORAMAC_STATUS_PARAMETER_INVALID; + } + } + } + else + { + status = LORAMAC_STATUS_PARAMETER_INVALID; + } + break; + } + case MIB_RX2_DEFAULT_CHANNEL: + { + verify.DatarateParams.Datarate = mibSet->Param.Rx2Channel.Datarate; + verify.DatarateParams.DownlinkDwellTime = LoRaMacParams.DownlinkDwellTime; + + if( RegionVerify( LoRaMacRegion, &verify, PHY_RX_DR ) == true ) + { + LoRaMacParamsDefaults.Rx2Channel = mibSet->Param.Rx2DefaultChannel; + } + else + { + status = LORAMAC_STATUS_PARAMETER_INVALID; + } + break; + } + case MIB_CHANNELS_DEFAULT_MASK: + { + chanMaskSet.ChannelsMaskIn = mibSet->Param.ChannelsMask; + chanMaskSet.ChannelsMaskType = CHANNELS_DEFAULT_MASK; + + if( RegionChanMaskSet( LoRaMacRegion, &chanMaskSet ) == false ) + { + status = LORAMAC_STATUS_PARAMETER_INVALID; + } + break; + } + case MIB_CHANNELS_MASK: + { + chanMaskSet.ChannelsMaskIn = mibSet->Param.ChannelsMask; + chanMaskSet.ChannelsMaskType = CHANNELS_MASK; + + if( RegionChanMaskSet( LoRaMacRegion, &chanMaskSet ) == false ) + { + status = LORAMAC_STATUS_PARAMETER_INVALID; + } + break; + } + case MIB_CHANNELS_NB_REP: + { + if( ( mibSet->Param.ChannelNbRep >= 1 ) && + ( mibSet->Param.ChannelNbRep <= 15 ) ) + { + LoRaMacParams.ChannelsNbRep = mibSet->Param.ChannelNbRep; + } + else + { + status = LORAMAC_STATUS_PARAMETER_INVALID; + } + break; + } + case MIB_MAX_RX_WINDOW_DURATION: + { + LoRaMacParams.MaxRxWindow = mibSet->Param.MaxRxWindow; + break; + } + case MIB_RECEIVE_DELAY_1: + { + LoRaMacParams.ReceiveDelay1 = mibSet->Param.ReceiveDelay1; + break; + } + case MIB_RECEIVE_DELAY_2: + { + LoRaMacParams.ReceiveDelay2 = mibSet->Param.ReceiveDelay2; + break; + } + case MIB_JOIN_ACCEPT_DELAY_1: + { + LoRaMacParams.JoinAcceptDelay1 = mibSet->Param.JoinAcceptDelay1; + break; + } + case MIB_JOIN_ACCEPT_DELAY_2: + { + LoRaMacParams.JoinAcceptDelay2 = mibSet->Param.JoinAcceptDelay2; + break; + } + case MIB_CHANNELS_DEFAULT_DATARATE: + { + verify.DatarateParams.Datarate = mibSet->Param.ChannelsDefaultDatarate; + + if( RegionVerify( LoRaMacRegion, &verify, PHY_DEF_TX_DR ) == true ) + { + LoRaMacParamsDefaults.ChannelsDatarate = verify.DatarateParams.Datarate; + } + else + { + status = LORAMAC_STATUS_PARAMETER_INVALID; + } + break; + } + case MIB_CHANNELS_DATARATE: + { + verify.DatarateParams.Datarate = mibSet->Param.ChannelsDatarate; + + if( RegionVerify( LoRaMacRegion, &verify, PHY_TX_DR ) == true ) + { + LoRaMacParams.ChannelsDatarate = verify.DatarateParams.Datarate; + } + else + { + status = LORAMAC_STATUS_PARAMETER_INVALID; + } + break; + } + case MIB_CHANNELS_DEFAULT_TX_POWER: + { + verify.TxPower = mibSet->Param.ChannelsDefaultTxPower; + + if( RegionVerify( LoRaMacRegion, &verify, PHY_DEF_TX_POWER ) == true ) + { + LoRaMacParamsDefaults.ChannelsTxPower = verify.TxPower; + } + else + { + status = LORAMAC_STATUS_PARAMETER_INVALID; + } + break; + } + case MIB_CHANNELS_TX_POWER: + { + verify.TxPower = mibSet->Param.ChannelsTxPower; + + if( RegionVerify( LoRaMacRegion, &verify, PHY_TX_POWER ) == true ) + { + LoRaMacParams.ChannelsTxPower = verify.TxPower; + } + else + { + status = LORAMAC_STATUS_PARAMETER_INVALID; + } + break; + } + case MIB_UPLINK_COUNTER: + { + UpLinkCounter = mibSet->Param.UpLinkCounter; + break; + } + case MIB_DOWNLINK_COUNTER: + { + DownLinkCounter = mibSet->Param.DownLinkCounter; + break; + } + case MIB_SYSTEM_MAX_RX_ERROR: + { + LoRaMacParams.SystemMaxRxError = LoRaMacParamsDefaults.SystemMaxRxError = mibSet->Param.SystemMaxRxError; + break; + } + case MIB_MIN_RX_SYMBOLS: + { + LoRaMacParams.MinRxSymbols = LoRaMacParamsDefaults.MinRxSymbols = mibSet->Param.MinRxSymbols; + break; + } + case MIB_ANTENNA_GAIN: + { + LoRaMacParams.AntennaGain = mibSet->Param.AntennaGain; + break; + } + default: + status = LORAMAC_STATUS_SERVICE_UNKNOWN; + break; + } + + return status; +} + +LoRaMacStatus_t LoRaMacChannelAdd( uint8_t id, ChannelParams_t params ) +{ + ChannelAddParams_t channelAdd; + + // Validate if the MAC is in a correct state + if( ( LoRaMacState & LORAMAC_TX_RUNNING ) == LORAMAC_TX_RUNNING ) + { + if( ( LoRaMacState & LORAMAC_TX_CONFIG ) != LORAMAC_TX_CONFIG ) + { + return LORAMAC_STATUS_BUSY; + } + } + + channelAdd.NewChannel = ¶ms; + channelAdd.ChannelId = id; + + return RegionChannelAdd( LoRaMacRegion, &channelAdd ); +} + +LoRaMacStatus_t LoRaMacChannelRemove( uint8_t id ) +{ + ChannelRemoveParams_t channelRemove; + + if( ( LoRaMacState & LORAMAC_TX_RUNNING ) == LORAMAC_TX_RUNNING ) + { + if( ( LoRaMacState & LORAMAC_TX_CONFIG ) != LORAMAC_TX_CONFIG ) + { + return LORAMAC_STATUS_BUSY; + } + } + + channelRemove.ChannelId = id; + + if( RegionChannelsRemove( LoRaMacRegion, &channelRemove ) == false ) + { + return LORAMAC_STATUS_PARAMETER_INVALID; + } + return LORAMAC_STATUS_OK; +} + +LoRaMacStatus_t LoRaMacMulticastChannelLink( MulticastParams_t *channelParam ) +{ + if( channelParam == NULL ) + { + return LORAMAC_STATUS_PARAMETER_INVALID; + } + if( ( LoRaMacState & LORAMAC_TX_RUNNING ) == LORAMAC_TX_RUNNING ) + { + return LORAMAC_STATUS_BUSY; + } + + // Reset downlink counter + channelParam->DownLinkCounter = 0; + + if( MulticastChannels == NULL ) + { + // New node is the fist element + MulticastChannels = channelParam; + } + else + { + MulticastParams_t *cur = MulticastChannels; + + // Search the last node in the list + while( cur->Next != NULL ) + { + cur = cur->Next; + } + // This function always finds the last node + cur->Next = channelParam; + } + + return LORAMAC_STATUS_OK; +} + +LoRaMacStatus_t LoRaMacMulticastChannelUnlink( MulticastParams_t *channelParam ) +{ + if( channelParam == NULL ) + { + return LORAMAC_STATUS_PARAMETER_INVALID; + } + if( ( LoRaMacState & LORAMAC_TX_RUNNING ) == LORAMAC_TX_RUNNING ) + { + return LORAMAC_STATUS_BUSY; + } + + if( MulticastChannels != NULL ) + { + if( MulticastChannels == channelParam ) + { + // First element + MulticastChannels = channelParam->Next; + } + else + { + MulticastParams_t *cur = MulticastChannels; + + // Search the node in the list + while( cur->Next && cur->Next != channelParam ) + { + cur = cur->Next; + } + // If we found the node, remove it + if( cur->Next ) + { + cur->Next = channelParam->Next; + } + } + channelParam->Next = NULL; + } + + return LORAMAC_STATUS_OK; +} + +LoRaMacStatus_t LoRaMacMlmeRequest( MlmeReq_t *mlmeRequest ) +{ + LoRaMacStatus_t status = LORAMAC_STATUS_SERVICE_UNKNOWN; + LoRaMacHeader_t macHdr; + AlternateDrParams_t altDr; + VerifyParams_t verify; + GetPhyParams_t getPhy; + PhyParam_t phyParam; + + if( mlmeRequest == NULL ) + { + return LORAMAC_STATUS_PARAMETER_INVALID; + } + if( ( LoRaMacState & LORAMAC_TX_RUNNING ) == LORAMAC_TX_RUNNING ) + { + return LORAMAC_STATUS_BUSY; + } + + memset1( ( uint8_t* ) &MlmeConfirm, 0, sizeof( MlmeConfirm ) ); + + MlmeConfirm.Status = LORAMAC_EVENT_INFO_STATUS_ERROR; + + switch( mlmeRequest->Type ) + { + case MLME_JOIN: + { + if( ( LoRaMacState & LORAMAC_TX_DELAYED ) == LORAMAC_TX_DELAYED ) + { + return LORAMAC_STATUS_BUSY; + } + + if( ( mlmeRequest->Req.Join.DevEui == NULL ) || + ( mlmeRequest->Req.Join.AppEui == NULL ) || + ( mlmeRequest->Req.Join.AppKey == NULL ) || + ( mlmeRequest->Req.Join.NbTrials == 0 ) ) + { + return LORAMAC_STATUS_PARAMETER_INVALID; + } + + // Verify the parameter NbTrials for the join procedure + verify.NbJoinTrials = mlmeRequest->Req.Join.NbTrials; + + if( RegionVerify( LoRaMacRegion, &verify, PHY_NB_JOIN_TRIALS ) == false ) + { + // Value not supported, get default + getPhy.Attribute = PHY_DEF_NB_JOIN_TRIALS; + phyParam = RegionGetPhyParam( LoRaMacRegion, &getPhy ); + mlmeRequest->Req.Join.NbTrials = ( uint8_t ) phyParam.Value; + } + + LoRaMacFlags.Bits.MlmeReq = 1; + MlmeConfirm.MlmeRequest = mlmeRequest->Type; + + LoRaMacDevEui = mlmeRequest->Req.Join.DevEui; + LoRaMacAppEui = mlmeRequest->Req.Join.AppEui; + LoRaMacAppKey = mlmeRequest->Req.Join.AppKey; + MaxJoinRequestTrials = mlmeRequest->Req.Join.NbTrials; + + // Reset variable JoinRequestTrials + JoinRequestTrials = 0; + + // Setup header information + macHdr.Value = 0; + macHdr.Bits.MType = FRAME_TYPE_JOIN_REQ; + + ResetMacParameters( ); + + altDr.NbTrials = JoinRequestTrials + 1; + + LoRaMacParams.ChannelsDatarate = RegionAlternateDr( LoRaMacRegion, &altDr ); + + status = Send( &macHdr, 0, NULL, 0 ); + break; + } + case MLME_LINK_CHECK: + { + LoRaMacFlags.Bits.MlmeReq = 1; + // LoRaMac will send this command piggy-pack + MlmeConfirm.MlmeRequest = mlmeRequest->Type; + + status = AddMacCommand( MOTE_MAC_LINK_CHECK_REQ, 0, 0 ); + break; + } + case MLME_TXCW: + { + MlmeConfirm.MlmeRequest = mlmeRequest->Type; + LoRaMacFlags.Bits.MlmeReq = 1; + status = SetTxContinuousWave( mlmeRequest->Req.TxCw.Timeout ); + break; + } + case MLME_TXCW_1: + { + MlmeConfirm.MlmeRequest = mlmeRequest->Type; + LoRaMacFlags.Bits.MlmeReq = 1; + status = SetTxContinuousWave1( mlmeRequest->Req.TxCw.Timeout, mlmeRequest->Req.TxCw.Frequency, mlmeRequest->Req.TxCw.Power ); + break; + } + default: + break; + } + + if( status != LORAMAC_STATUS_OK ) + { + NodeAckRequested = false; + LoRaMacFlags.Bits.MlmeReq = 0; + } + + return status; +} + +LoRaMacStatus_t LoRaMacMcpsRequest( McpsReq_t *mcpsRequest ) +{ + GetPhyParams_t getPhy; + PhyParam_t phyParam; + LoRaMacStatus_t status = LORAMAC_STATUS_SERVICE_UNKNOWN; + LoRaMacHeader_t macHdr; + VerifyParams_t verify; + uint8_t fPort = 0; + void *fBuffer; + uint16_t fBufferSize; + int8_t datarate; + bool readyToSend = false; + + if( mcpsRequest == NULL ) + { + return LORAMAC_STATUS_PARAMETER_INVALID; + } + if( ( ( LoRaMacState & LORAMAC_TX_RUNNING ) == LORAMAC_TX_RUNNING ) || + ( ( LoRaMacState & LORAMAC_TX_DELAYED ) == LORAMAC_TX_DELAYED ) ) + { + return LORAMAC_STATUS_BUSY; + } + + macHdr.Value = 0; + memset1 ( ( uint8_t* ) &McpsConfirm, 0, sizeof( McpsConfirm ) ); + McpsConfirm.Status = LORAMAC_EVENT_INFO_STATUS_ERROR; + + // AckTimeoutRetriesCounter must be reset every time a new request (unconfirmed or confirmed) is performed. + AckTimeoutRetriesCounter = 1; + + switch( mcpsRequest->Type ) + { + case MCPS_UNCONFIRMED: + { + readyToSend = true; + AckTimeoutRetries = 1; + + macHdr.Bits.MType = FRAME_TYPE_DATA_UNCONFIRMED_UP; + fPort = mcpsRequest->Req.Unconfirmed.fPort; + fBuffer = mcpsRequest->Req.Unconfirmed.fBuffer; + fBufferSize = mcpsRequest->Req.Unconfirmed.fBufferSize; + datarate = mcpsRequest->Req.Unconfirmed.Datarate; + break; + } + case MCPS_CONFIRMED: + { + readyToSend = true; + AckTimeoutRetries = mcpsRequest->Req.Confirmed.NbTrials; + + macHdr.Bits.MType = FRAME_TYPE_DATA_CONFIRMED_UP; + fPort = mcpsRequest->Req.Confirmed.fPort; + fBuffer = mcpsRequest->Req.Confirmed.fBuffer; + fBufferSize = mcpsRequest->Req.Confirmed.fBufferSize; + datarate = mcpsRequest->Req.Confirmed.Datarate; + break; + } + case MCPS_PROPRIETARY: + { + readyToSend = true; + AckTimeoutRetries = 1; + + macHdr.Bits.MType = FRAME_TYPE_PROPRIETARY; + fBuffer = mcpsRequest->Req.Proprietary.fBuffer; + fBufferSize = mcpsRequest->Req.Proprietary.fBufferSize; + datarate = mcpsRequest->Req.Proprietary.Datarate; + break; + } + default: + break; + } + + // Get the minimum possible datarate + getPhy.Attribute = PHY_MIN_TX_DR; + getPhy.UplinkDwellTime = LoRaMacParams.UplinkDwellTime; + phyParam = RegionGetPhyParam( LoRaMacRegion, &getPhy ); + // Apply the minimum possible datarate. + // Some regions have limitations for the minimum datarate. + datarate = MAX( datarate, phyParam.Value ); + + if( readyToSend == true ) + { + if( AdrCtrlOn == false ) + { + verify.DatarateParams.Datarate = datarate; + verify.DatarateParams.UplinkDwellTime = LoRaMacParams.UplinkDwellTime; + + if( RegionVerify( LoRaMacRegion, &verify, PHY_TX_DR ) == true ) + { + LoRaMacParams.ChannelsDatarate = verify.DatarateParams.Datarate; + } + else + { + return LORAMAC_STATUS_PARAMETER_INVALID; + } + } + + status = Send( &macHdr, fPort, fBuffer, fBufferSize ); + if( status == LORAMAC_STATUS_OK ) + { + McpsConfirm.McpsRequest = mcpsRequest->Type; + LoRaMacFlags.Bits.McpsReq = 1; + } + else + { + NodeAckRequested = false; + } + } + + return status; +} + +void LoRaMacTestRxWindowsOn( bool enable ) +{ + IsRxWindowsEnabled = enable; +} + +void LoRaMacTestSetMic( uint16_t txPacketCounter ) +{ + UpLinkCounter = txPacketCounter; + IsUpLinkCounterFixed = true; +} + +void LoRaMacTestSetDutyCycleOn( bool enable ) +{ + VerifyParams_t verify; + + verify.DutyCycle = enable; + + if( RegionVerify( LoRaMacRegion, &verify, PHY_DUTY_CYCLE ) == true ) + { + DutyCycleOn = enable; + } +} + +void LoRaMacTestSetChannel( uint8_t channel ) +{ + Channel = channel; +} diff --git a/src/mac/LoRaMac.h b/src/mac/LoRaMac.h new file mode 100755 index 0000000..8e479d2 --- /dev/null +++ b/src/mac/LoRaMac.h @@ -0,0 +1,1961 @@ +/*! + * \file LoRaMac.h + * + * \brief LoRa MAC layer implementation + * + * \copyright Revised BSD License, see section \ref LICENSE. + * + * \code + * ______ _ + * / _____) _ | | + * ( (____ _____ ____ _| |_ _____ ____| |__ + * \____ \| ___ | (_ _) ___ |/ ___) _ \ + * _____) ) ____| | | || |_| ____( (___| | | | + * (______/|_____)_|_|_| \__)_____)\____)_| |_| + * (C)2013 Semtech + * + * ___ _____ _ ___ _ _____ ___ ___ ___ ___ + * / __|_ _/_\ / __| |/ / __/ _ \| _ \/ __| __| + * \__ \ | |/ _ \ (__| ' <| _| (_) | / (__| _| + * |___/ |_/_/ \_\___|_|\_\_| \___/|_|_\\___|___| + * embedded.connectivity.solutions=============== + * + * \endcode + * + * \author Miguel Luis ( Semtech ) + * + * \author Gregory Cristian ( Semtech ) + * + * \author Daniel Jaeckle ( STACKFORCE ) + * + * \defgroup LORAMAC LoRa MAC layer implementation + * This module specifies the API implementation of the LoRaMAC layer. + * This is a placeholder for a detailed description of the LoRaMac + * layer and the supported features. + * \{ + * + * \example classA/LoRaMote/main.c + * LoRaWAN class A application example for the LoRaMote. + * + * \example classB/LoRaMote/main.c + * LoRaWAN class B application example for the LoRaMote. + * + * \example classC/LoRaMote/main.c + * LoRaWAN class C application example for the LoRaMote. + * + * \example classA/MoteII/main.c + * LoRaWAN class A application example for the MoteII. + * + * \example classB/MoteII/main.c + * LoRaWAN class B application example for the MoteII. + * + * \example classC/MoteII/main.c + * LoRaWAN class C application example for the MoteII. + * + * \example classA/NAMote72/main.c + * LoRaWAN class A application example for the NAMote72. + * + * \example classB/NAMote72/main.c + * LoRaWAN class B application example for the NAMote72. + * + * \example classC/NAMote72/main.c + * LoRaWAN class C application example for the NAMote72. + * + * \example classA/SensorNode/main.c + * LoRaWAN class A application example for the SensorNode. + * + * \example classB/SensorNode/main.c + * LoRaWAN class B application example for the SensorNode. + * + * \example classC/SensorNode/main.c + * LoRaWAN class C application example for the SensorNode. + * + * \example classA/SK-iM880A/main.c + * LoRaWAN class A application example for the SK-iM880A. + * + * \example classB/SK-iM880A/main.c + * LoRaWAN class B application example for the SK-iM880A. + * + * \example classC/SK-iM880A/main.c + * LoRaWAN class C application example for the SK-iM880A. + */ +#ifndef __LORAMAC_H__ +#define __LORAMAC_H__ + +/*! + * Check the Mac layer state every MAC_STATE_CHECK_TIMEOUT in ms + */ +#define MAC_STATE_CHECK_TIMEOUT 1000 + +/*! + * Maximum number of times the MAC layer tries to get an acknowledge. + */ +#define MAX_ACK_RETRIES 8 + +/*! + * Frame direction definition for up-link communications + */ +#define UP_LINK 0 + +/*! + * Frame direction definition for down-link communications + */ +#define DOWN_LINK 1 + +/*! + * Sets the length of the LoRaMAC footer field. + * Mainly indicates the MIC field length + */ +#define LORAMAC_MFR_LEN 4 + +/*! + * FRMPayload overhead to be used when setting the Radio.SetMaxPayloadLength + * in RxWindowSetup function. + * Maximum PHYPayload = MaxPayloadOfDatarate/MaxPayloadOfDatarateRepeater + LORA_MAC_FRMPAYLOAD_OVERHEAD + */ +#define LORA_MAC_FRMPAYLOAD_OVERHEAD 13 // MHDR(1) + FHDR(7) + Port(1) + MIC(4) + +/*! + * LoRaWAN devices classes definition + * + * LoRaWAN Specification V1.0.2, chapter 2.1 + */ +typedef enum eDeviceClass +{ + /*! + * LoRaWAN device class A + * + * LoRaWAN Specification V1.0.2, chapter 3 + */ + CLASS_A, + /*! + * LoRaWAN device class B + * + * LoRaWAN Specification V1.0.2, chapter 8 + */ + CLASS_B, + /*! + * LoRaWAN device class C + * + * LoRaWAN Specification V1.0.2, chapter 17 + */ + CLASS_C, +}DeviceClass_t; + +/*! + * LoRaMAC channels parameters definition + */ +typedef union uDrRange +{ + /*! + * Byte-access to the bits + */ + int8_t Value; + /*! + * Structure to store the minimum and the maximum datarate + */ + struct sFields + { + /*! + * Minimum data rate + * + * LoRaWAN Regional Parameters V1.0.2rB + * + * The allowed ranges are region specific. Please refer to \ref DR_0 to \ref DR_15 for details. + */ + int8_t Min : 4; + /*! + * Maximum data rate + * + * LoRaWAN Regional Parameters V1.0.2rB + * + * The allowed ranges are region specific. Please refer to \ref DR_0 to \ref DR_15 for details. + */ + int8_t Max : 4; + }Fields; +}DrRange_t; + +/*! + * LoRaMAC band parameters definition + */ +typedef struct sBand +{ + /*! + * Duty cycle + */ + uint16_t DCycle; + /*! + * Maximum Tx power + */ + int8_t TxMaxPower; + /*! + * Time stamp of the last JoinReq Tx frame. + */ + TimerTime_t LastJoinTxDoneTime; + /*! + * Time stamp of the last Tx frame + */ + TimerTime_t LastTxDoneTime; + /*! + * Holds the time where the device is off + */ + TimerTime_t TimeOff; +}Band_t; + +/*! + * LoRaMAC channel definition + */ +typedef struct sChannelParams +{ + /*! + * Frequency in Hz + */ + uint32_t Frequency; + /*! + * Alternative frequency for RX window 1 + */ + uint32_t Rx1Frequency; + /*! + * Data rate definition + */ + DrRange_t DrRange; + /*! + * Band index + */ + uint8_t Band; +}ChannelParams_t; + +/*! + * LoRaMAC receive window 2 channel parameters + */ +typedef struct sRx2ChannelParams +{ + /*! + * Frequency in Hz + */ + uint32_t Frequency; + /*! + * Data rate + * + * LoRaWAN Regional Parameters V1.0.2rB + * + * The allowed ranges are region specific. Please refer to \ref DR_0 to \ref DR_15 for details. + */ + uint8_t Datarate; +}Rx2ChannelParams_t; + +/*! + * Global MAC layer parameters + */ +typedef struct sLoRaMacParams +{ + /*! + * Channels TX power + */ + int8_t ChannelsTxPower; + /*! + * Channels data rate + */ + int8_t ChannelsDatarate; + /*! + * System overall timing error in milliseconds. + * [-SystemMaxRxError : +SystemMaxRxError] + * Default: +/-10 ms + */ + uint32_t SystemMaxRxError; + /*! + * Minimum required number of symbols to detect an Rx frame + * Default: 6 symbols + */ + uint8_t MinRxSymbols; + /*! + * LoRaMac maximum time a reception window stays open + */ + uint32_t MaxRxWindow; + /*! + * Receive delay 1 + */ + uint32_t ReceiveDelay1; + /*! + * Receive delay 2 + */ + uint32_t ReceiveDelay2; + /*! + * Join accept delay 1 + */ + uint32_t JoinAcceptDelay1; + /*! + * Join accept delay 1 + */ + uint32_t JoinAcceptDelay2; + /*! + * Number of uplink messages repetitions [1:15] (unconfirmed messages only) + */ + uint8_t ChannelsNbRep; + /*! + * Datarate offset between uplink and downlink on first window + */ + uint8_t Rx1DrOffset; + /*! + * LoRaMAC 2nd reception window settings + */ + Rx2ChannelParams_t Rx2Channel; + /*! + * Uplink dwell time configuration. 0: No limit, 1: 400ms + */ + uint8_t UplinkDwellTime; + /*! + * Downlink dwell time configuration. 0: No limit, 1: 400ms + */ + uint8_t DownlinkDwellTime; + /*! + * Maximum possible EIRP + */ + float MaxEirp; + /*! + * Antenna gain of the node + */ + float AntennaGain; +}LoRaMacParams_t; + +/*! + * LoRaMAC multicast channel parameter + */ +typedef struct sMulticastParams +{ + /*! + * Address + */ + uint32_t Address; + /*! + * Network session key + */ + uint8_t NwkSKey[16]; + /*! + * Application session key + */ + uint8_t AppSKey[16]; + /*! + * Downlink counter + */ + uint32_t DownLinkCounter; + /*! + * Reference pointer to the next multicast channel parameters in the list + */ + struct sMulticastParams *Next; +}MulticastParams_t; + +/*! + * LoRaMAC frame types + * + * LoRaWAN Specification V1.0.2, chapter 4.2.1, table 1 + */ +typedef enum eLoRaMacFrameType +{ + /*! + * LoRaMAC join request frame + */ + FRAME_TYPE_JOIN_REQ = 0x00, + /*! + * LoRaMAC join accept frame + */ + FRAME_TYPE_JOIN_ACCEPT = 0x01, + /*! + * LoRaMAC unconfirmed up-link frame + */ + FRAME_TYPE_DATA_UNCONFIRMED_UP = 0x02, + /*! + * LoRaMAC unconfirmed down-link frame + */ + FRAME_TYPE_DATA_UNCONFIRMED_DOWN = 0x03, + /*! + * LoRaMAC confirmed up-link frame + */ + FRAME_TYPE_DATA_CONFIRMED_UP = 0x04, + /*! + * LoRaMAC confirmed down-link frame + */ + FRAME_TYPE_DATA_CONFIRMED_DOWN = 0x05, + /*! + * LoRaMAC RFU frame + */ + FRAME_TYPE_RFU = 0x06, + /*! + * LoRaMAC proprietary frame + */ + FRAME_TYPE_PROPRIETARY = 0x07, +}LoRaMacFrameType_t; + +/*! + * LoRaMAC mote MAC commands + * + * LoRaWAN Specification V1.0.2, chapter 5, table 4 + */ +typedef enum eLoRaMacMoteCmd +{ + /*! + * LinkCheckReq + */ + MOTE_MAC_LINK_CHECK_REQ = 0x02, + /*! + * LinkADRAns + */ + MOTE_MAC_LINK_ADR_ANS = 0x03, + /*! + * DutyCycleAns + */ + MOTE_MAC_DUTY_CYCLE_ANS = 0x04, + /*! + * RXParamSetupAns + */ + MOTE_MAC_RX_PARAM_SETUP_ANS = 0x05, + /*! + * DevStatusAns + */ + MOTE_MAC_DEV_STATUS_ANS = 0x06, + /*! + * NewChannelAns + */ + MOTE_MAC_NEW_CHANNEL_ANS = 0x07, + /*! + * RXTimingSetupAns + */ + MOTE_MAC_RX_TIMING_SETUP_ANS = 0x08, + /*! + * TXParamSetupAns + */ + MOTE_MAC_TX_PARAM_SETUP_ANS = 0x09, + /*! + * DlChannelAns + */ + MOTE_MAC_DL_CHANNEL_ANS = 0x0A +}LoRaMacMoteCmd_t; + +/*! + * LoRaMAC server MAC commands + * + * LoRaWAN Specification V1.0.2 chapter 5, table 4 + */ +typedef enum eLoRaMacSrvCmd +{ + /*! + * LinkCheckAns + */ + SRV_MAC_LINK_CHECK_ANS = 0x02, + /*! + * LinkADRReq + */ + SRV_MAC_LINK_ADR_REQ = 0x03, + /*! + * DutyCycleReq + */ + SRV_MAC_DUTY_CYCLE_REQ = 0x04, + /*! + * RXParamSetupReq + */ + SRV_MAC_RX_PARAM_SETUP_REQ = 0x05, + /*! + * DevStatusReq + */ + SRV_MAC_DEV_STATUS_REQ = 0x06, + /*! + * NewChannelReq + */ + SRV_MAC_NEW_CHANNEL_REQ = 0x07, + /*! + * RXTimingSetupReq + */ + SRV_MAC_RX_TIMING_SETUP_REQ = 0x08, + /*! + * NewChannelReq + */ + SRV_MAC_TX_PARAM_SETUP_REQ = 0x09, + /*! + * DlChannelReq + */ + SRV_MAC_DL_CHANNEL_REQ = 0x0A, +}LoRaMacSrvCmd_t; + +/*! + * LoRaMAC Battery level indicator + */ +typedef enum eLoRaMacBatteryLevel +{ + /*! + * External power source + */ + BAT_LEVEL_EXT_SRC = 0x00, + /*! + * Battery level empty + */ + BAT_LEVEL_EMPTY = 0x01, + /*! + * Battery level full + */ + BAT_LEVEL_FULL = 0xFE, + /*! + * Battery level - no measurement available + */ + BAT_LEVEL_NO_MEASURE = 0xFF, +}LoRaMacBatteryLevel_t; + +/*! + * LoRaMAC header field definition (MHDR field) + * + * LoRaWAN Specification V1.0.2, chapter 4.2 + */ +typedef union uLoRaMacHeader +{ + /*! + * Byte-access to the bits + */ + uint8_t Value; + /*! + * Structure containing single access to header bits + */ + struct sHdrBits + { + /*! + * Major version + */ + uint8_t Major : 2; + /*! + * RFU + */ + uint8_t RFU : 3; + /*! + * Message type + */ + uint8_t MType : 3; + }Bits; +}LoRaMacHeader_t; + +/*! + * LoRaMAC frame control field definition (FCtrl) + * + * LoRaWAN Specification V1.0.2, chapter 4.3.1 + */ +typedef union uLoRaMacFrameCtrl +{ + /*! + * Byte-access to the bits + */ + uint8_t Value; + /*! + * Structure containing single access to bits + */ + struct sCtrlBits + { + /*! + * Frame options length + */ + uint8_t FOptsLen : 4; + /*! + * Frame pending bit + */ + uint8_t FPending : 1; + /*! + * Message acknowledge bit + */ + uint8_t Ack : 1; + /*! + * ADR acknowledgment request bit + */ + uint8_t AdrAckReq : 1; + /*! + * ADR control in frame header + */ + uint8_t Adr : 1; + }Bits; +}LoRaMacFrameCtrl_t; + +/*! + * Enumeration containing the status of the operation of a MAC service + */ +typedef enum eLoRaMacEventInfoStatus +{ + /*! + * Service performed successfully + */ + LORAMAC_EVENT_INFO_STATUS_OK = 0, + /*! + * An error occurred during the execution of the service + */ + LORAMAC_EVENT_INFO_STATUS_ERROR, + /*! + * A Tx timeout occurred + */ + LORAMAC_EVENT_INFO_STATUS_TX_TIMEOUT, + /*! + * An Rx timeout occurred on receive window 1 + */ + LORAMAC_EVENT_INFO_STATUS_RX1_TIMEOUT, + /*! + * An Rx timeout occurred on receive window 2 + */ + LORAMAC_EVENT_INFO_STATUS_RX2_TIMEOUT, + /*! + * An Rx error occurred on receive window 1 + */ + LORAMAC_EVENT_INFO_STATUS_RX1_ERROR, + /*! + * An Rx error occurred on receive window 2 + */ + LORAMAC_EVENT_INFO_STATUS_RX2_ERROR, + /*! + * An error occurred in the join procedure + */ + LORAMAC_EVENT_INFO_STATUS_JOIN_FAIL, + /*! + * A frame with an invalid downlink counter was received. The + * downlink counter of the frame was equal to the local copy + * of the downlink counter of the node. + */ + LORAMAC_EVENT_INFO_STATUS_DOWNLINK_REPEATED, + /*! + * The MAC could not retransmit a frame since the MAC decreased the datarate. The + * payload size is not applicable for the datarate. + */ + LORAMAC_EVENT_INFO_STATUS_TX_DR_PAYLOAD_SIZE_ERROR, + /*! + * The node has lost MAX_FCNT_GAP or more frames. + */ + LORAMAC_EVENT_INFO_STATUS_DOWNLINK_TOO_MANY_FRAMES_LOSS, + /*! + * An address error occurred + */ + LORAMAC_EVENT_INFO_STATUS_ADDRESS_FAIL, + /*! + * message integrity check failure + */ + LORAMAC_EVENT_INFO_STATUS_MIC_FAIL, +}LoRaMacEventInfoStatus_t; + +/*! + * LoRaMac tx/rx operation state + */ +typedef union eLoRaMacFlags_t +{ + /*! + * Byte-access to the bits + */ + uint8_t Value; + /*! + * Structure containing single access to bits + */ + struct sMacFlagBits + { + /*! + * MCPS-Req pending + */ + uint8_t McpsReq : 1; + /*! + * MCPS-Ind pending + */ + uint8_t McpsInd : 1; + /*! + * MCPS-Ind pending. Skip indication to the application layer + */ + uint8_t McpsIndSkip : 1; + /*! + * MLME-Req pending + */ + uint8_t MlmeReq : 1; + /*! + * MAC cycle done + */ + uint8_t MacDone : 1; + }Bits; +}LoRaMacFlags_t; + +/*! + * + * \brief LoRaMAC data services + * + * \details The following table list the primitives which are supported by the + * specific MAC data service: + * + * Name | Request | Indication | Response | Confirm + * --------------------- | :-----: | :--------: | :------: | :-----: + * \ref MCPS_UNCONFIRMED | YES | YES | NO | YES + * \ref MCPS_CONFIRMED | YES | YES | NO | YES + * \ref MCPS_MULTICAST | NO | YES | NO | NO + * \ref MCPS_PROPRIETARY | YES | YES | NO | YES + * + * The following table provides links to the function implementations of the + * related MCPS primitives: + * + * Primitive | Function + * ---------------- | :---------------------: + * MCPS-Request | \ref LoRaMacMlmeRequest + * MCPS-Confirm | MacMcpsConfirm in \ref LoRaMacPrimitives_t + * MCPS-Indication | MacMcpsIndication in \ref LoRaMacPrimitives_t + */ +typedef enum eMcps +{ + /*! + * Unconfirmed LoRaMAC frame + */ + MCPS_UNCONFIRMED, + /*! + * Confirmed LoRaMAC frame + */ + MCPS_CONFIRMED, + /*! + * Multicast LoRaMAC frame + */ + MCPS_MULTICAST, + /*! + * Proprietary frame + */ + MCPS_PROPRIETARY, +}Mcps_t; + +/*! + * LoRaMAC MCPS-Request for an unconfirmed frame + */ +typedef struct sMcpsReqUnconfirmed +{ + /*! + * Frame port field. Must be set if the payload is not empty. Use the + * application specific frame port values: [1...223] + * + * LoRaWAN Specification V1.0.2, chapter 4.3.2 + */ + uint8_t fPort; + /*! + * Pointer to the buffer of the frame payload + */ + void *fBuffer; + /*! + * Size of the frame payload + */ + uint16_t fBufferSize; + /*! + * Uplink datarate, if ADR is off + */ + int8_t Datarate; +}McpsReqUnconfirmed_t; + +/*! + * LoRaMAC MCPS-Request for a confirmed frame + */ +typedef struct sMcpsReqConfirmed +{ + /*! + * Frame port field. Must be set if the payload is not empty. Use the + * application specific frame port values: [1...223] + * + * LoRaWAN Specification V1.0.2, chapter 4.3.2 + */ + uint8_t fPort; + /*! + * Pointer to the buffer of the frame payload + */ + void *fBuffer; + /*! + * Size of the frame payload + */ + uint16_t fBufferSize; + /*! + * Uplink datarate, if ADR is off + */ + int8_t Datarate; + /*! + * Number of trials to transmit the frame, if the LoRaMAC layer did not + * receive an acknowledgment. The MAC performs a datarate adaptation, + * according to the LoRaWAN Specification V1.0.2, chapter 18.4, according + * to the following table: + * + * Transmission nb | Data Rate + * ----------------|----------- + * 1 (first) | DR + * 2 | DR + * 3 | max(DR-1,0) + * 4 | max(DR-1,0) + * 5 | max(DR-2,0) + * 6 | max(DR-2,0) + * 7 | max(DR-3,0) + * 8 | max(DR-3,0) + * + * Note, that if NbTrials is set to 1 or 2, the MAC will not decrease + * the datarate, in case the LoRaMAC layer did not receive an acknowledgment + */ + uint8_t NbTrials; +}McpsReqConfirmed_t; + +/*! + * LoRaMAC MCPS-Request for a proprietary frame + */ +typedef struct sMcpsReqProprietary +{ + /*! + * Pointer to the buffer of the frame payload + */ + void *fBuffer; + /*! + * Size of the frame payload + */ + uint16_t fBufferSize; + /*! + * Uplink datarate, if ADR is off + */ + int8_t Datarate; +}McpsReqProprietary_t; + +/*! + * LoRaMAC MCPS-Request structure + */ +typedef struct sMcpsReq +{ + /*! + * MCPS-Request type + */ + Mcps_t Type; + + /*! + * MCPS-Request parameters + */ + union uMcpsParam + { + /*! + * MCPS-Request parameters for an unconfirmed frame + */ + McpsReqUnconfirmed_t Unconfirmed; + /*! + * MCPS-Request parameters for a confirmed frame + */ + McpsReqConfirmed_t Confirmed; + /*! + * MCPS-Request parameters for a proprietary frame + */ + McpsReqProprietary_t Proprietary; + }Req; +}McpsReq_t; + +/*! + * LoRaMAC MCPS-Confirm + */ +typedef struct sMcpsConfirm +{ + /*! + * Holds the previously performed MCPS-Request + */ + Mcps_t McpsRequest; + /*! + * Status of the operation + */ + LoRaMacEventInfoStatus_t Status; + /*! + * Uplink datarate + */ + uint8_t Datarate; + /*! + * Transmission power + */ + int8_t TxPower; + /*! + * Set if an acknowledgement was received + */ + bool AckReceived; + /*! + * Provides the number of retransmissions + */ + uint8_t NbRetries; + /*! + * The transmission time on air of the frame + */ + TimerTime_t TxTimeOnAir; + /*! + * The uplink counter value related to the frame + */ + uint32_t UpLinkCounter; + /*! + * The uplink frequency related to the frame + */ + uint32_t UpLinkFrequency; +}McpsConfirm_t; + +/*! + * LoRaMAC MCPS-Indication primitive + */ +typedef struct sMcpsIndication +{ + /*! + * MCPS-Indication type + */ + Mcps_t McpsIndication; + /*! + * Status of the operation + */ + LoRaMacEventInfoStatus_t Status; + /*! + * Multicast + */ + uint8_t Multicast; + /*! + * Application port + */ + uint8_t Port; + /*! + * Downlink datarate + */ + uint8_t RxDatarate; + /*! + * Frame pending status + */ + uint8_t FramePending; + /*! + * Pointer to the received data stream + */ + uint8_t *Buffer; + /*! + * Size of the received data stream + */ + uint8_t BufferSize; + /*! + * Indicates, if data is available + */ + bool RxData; + /*! + * Rssi of the received packet + */ + int16_t Rssi; + /*! + * Snr of the received packet + */ + uint8_t Snr; + /*! + * Receive window + * + * [0: Rx window 1, 1: Rx window 2] + */ + uint8_t RxSlot; + /*! + * Set if an acknowledgement was received + */ + bool AckReceived; + /*! + * The downlink counter value for the received frame + */ + uint32_t DownLinkCounter; +}McpsIndication_t; + +/*! + * \brief LoRaMAC management services + * + * \details The following table list the primitives which are supported by the + * specific MAC management service: + * + * Name | Request | Indication | Response | Confirm + * --------------------- | :-----: | :--------: | :------: | :-----: + * \ref MLME_JOIN | YES | NO | NO | YES + * \ref MLME_LINK_CHECK | YES | NO | NO | YES + * \ref MLME_TXCW | YES | NO | NO | YES + * + * The following table provides links to the function implementations of the + * related MLME primitives. + * + * Primitive | Function + * ---------------- | :---------------------: + * MLME-Request | \ref LoRaMacMlmeRequest + * MLME-Confirm | MacMlmeConfirm in \ref LoRaMacPrimitives_t + */ +typedef enum eMlme +{ + /*! + * Initiates the Over-the-Air activation + * + * LoRaWAN Specification V1.0.2, chapter 6.2 + */ + MLME_JOIN, + /*! + * LinkCheckReq - Connectivity validation + * + * LoRaWAN Specification V1.0.2, chapter 5, table 4 + */ + MLME_LINK_CHECK, + /*! + * Sets Tx continuous wave mode + * + * LoRaWAN end-device certification + */ + MLME_TXCW, + /*! + * Sets Tx continuous wave mode (new LoRa-Alliance CC definition) + * + * LoRaWAN end-device certification + */ + MLME_TXCW_1, +}Mlme_t; + +/*! + * LoRaMAC MLME-Request for the join service + */ +typedef struct sMlmeReqJoin +{ + /*! + * Globally unique end-device identifier + * + * LoRaWAN Specification V1.0.2, chapter 6.2.1 + */ + uint8_t *DevEui; + /*! + * Application identifier + * + * LoRaWAN Specification V1.0.2, chapter 6.1.2 + */ + uint8_t *AppEui; + /*! + * AES-128 application key + * + * LoRaWAN Specification V1.0.2, chapter 6.2.2 + */ + uint8_t *AppKey; + /*! + * Number of trials for the join request. + */ + uint8_t NbTrials; +}MlmeReqJoin_t; + +/*! + * LoRaMAC MLME-Request for Tx continuous wave mode + */ +typedef struct sMlmeReqTxCw +{ + /*! + * Time in seconds while the radio is kept in continuous wave mode + */ + uint16_t Timeout; + /*! + * RF frequency to set (Only used with new way) + */ + uint32_t Frequency; + /*! + * RF output power to set (Only used with new way) + */ + uint8_t Power; +}MlmeReqTxCw_t; + +/*! + * LoRaMAC MLME-Request structure + */ +typedef struct sMlmeReq +{ + /*! + * MLME-Request type + */ + Mlme_t Type; + + /*! + * MLME-Request parameters + */ + union uMlmeParam + { + /*! + * MLME-Request parameters for a join request + */ + MlmeReqJoin_t Join; + /*! + * MLME-Request parameters for Tx continuous mode request + */ + MlmeReqTxCw_t TxCw; + }Req; +}MlmeReq_t; + +/*! + * LoRaMAC MLME-Confirm primitive + */ +typedef struct sMlmeConfirm +{ + /*! + * Holds the previously performed MLME-Request + */ + Mlme_t MlmeRequest; + /*! + * Status of the operation + */ + LoRaMacEventInfoStatus_t Status; + /*! + * The transmission time on air of the frame + */ + TimerTime_t TxTimeOnAir; + /*! + * Demodulation margin. Contains the link margin [dB] of the last + * successfully received LinkCheckReq + */ + uint8_t DemodMargin; + /*! + * Number of gateways which received the last LinkCheckReq + */ + uint8_t NbGateways; + /*! + * Provides the number of retransmissions + */ + uint8_t NbRetries; +}MlmeConfirm_t; + +/*! + * LoRa Mac Information Base (MIB) + * + * The following table lists the MIB parameters and the related attributes: + * + * Attribute | Get | Set + * --------------------------------- | :-: | :-: + * \ref MIB_DEVICE_CLASS | YES | YES + * \ref MIB_NETWORK_JOINED | YES | YES + * \ref MIB_ADR | YES | YES + * \ref MIB_NET_ID | YES | YES + * \ref MIB_DEV_ADDR | YES | YES + * \ref MIB_NWK_SKEY | YES | YES + * \ref MIB_APP_SKEY | YES | YES + * \ref MIB_PUBLIC_NETWORK | YES | YES + * \ref MIB_REPEATER_SUPPORT | YES | YES + * \ref MIB_CHANNELS | YES | NO + * \ref MIB_RX2_CHANNEL | YES | YES + * \ref MIB_CHANNELS_MASK | YES | YES + * \ref MIB_CHANNELS_DEFAULT_MASK | YES | YES + * \ref MIB_CHANNELS_NB_REP | YES | YES + * \ref MIB_MAX_RX_WINDOW_DURATION | YES | YES + * \ref MIB_RECEIVE_DELAY_1 | YES | YES + * \ref MIB_RECEIVE_DELAY_2 | YES | YES + * \ref MIB_JOIN_ACCEPT_DELAY_1 | YES | YES + * \ref MIB_JOIN_ACCEPT_DELAY_2 | YES | YES + * \ref MIB_CHANNELS_DATARATE | YES | YES + * \ref MIB_CHANNELS_DEFAULT_DATARATE| YES | YES + * \ref MIB_CHANNELS_TX_POWER | YES | YES + * \ref MIB_CHANNELS_DEFAULT_TX_POWER| YES | YES + * \ref MIB_UPLINK_COUNTER | YES | YES + * \ref MIB_DOWNLINK_COUNTER | YES | YES + * \ref MIB_MULTICAST_CHANNEL | YES | NO + * \ref MIB_SYSTEM_MAX_RX_ERROR | YES | YES + * \ref MIB_MIN_RX_SYMBOLS | YES | YES + * \ref MIB_ANTENNA_GAIN | YES | YES + * + * The following table provides links to the function implementations of the + * related MIB primitives: + * + * Primitive | Function + * ---------------- | :---------------------: + * MIB-Set | \ref LoRaMacMibSetRequestConfirm + * MIB-Get | \ref LoRaMacMibGetRequestConfirm + */ +typedef enum eMib +{ + /*! + * LoRaWAN device class + * + * LoRaWAN Specification V1.0.2 + */ + MIB_DEVICE_CLASS, + /*! + * LoRaWAN Network joined attribute + * + * LoRaWAN Specification V1.0.2 + */ + MIB_NETWORK_JOINED, + /*! + * Adaptive data rate + * + * LoRaWAN Specification V1.0.2, chapter 4.3.1.1 + * + * [true: ADR enabled, false: ADR disabled] + */ + MIB_ADR, + /*! + * Network identifier + * + * LoRaWAN Specification V1.0.2, chapter 6.1.1 + */ + MIB_NET_ID, + /*! + * End-device address + * + * LoRaWAN Specification V1.0.2, chapter 6.1.1 + */ + MIB_DEV_ADDR, + /*! + * Network session key + * + * LoRaWAN Specification V1.0.2, chapter 6.1.3 + */ + MIB_NWK_SKEY, + /*! + * Application session key + * + * LoRaWAN Specification V1.0.2, chapter 6.1.4 + */ + MIB_APP_SKEY, + /*! + * Set the network type to public or private + * + * LoRaWAN Regional Parameters V1.0.2rB + * + * [true: public network, false: private network] + */ + MIB_PUBLIC_NETWORK, + /*! + * Support the operation with repeaters + * + * LoRaWAN Regional Parameters V1.0.2rB + * + * [true: repeater support enabled, false: repeater support disabled] + */ + MIB_REPEATER_SUPPORT, + /*! + * Communication channels. A get request will return a + * pointer which references the first entry of the channel list. The + * list is of size LORA_MAX_NB_CHANNELS + * + * LoRaWAN Regional Parameters V1.0.2rB + */ + MIB_CHANNELS, + /*! + * Set receive window 2 channel + * + * LoRaWAN Specification V1.0.2, chapter 3.3.1 + */ + MIB_RX2_CHANNEL, + /*! + * Set receive window 2 channel + * + * LoRaWAN Specification V1.0.2, chapter 3.3.2 + */ + MIB_RX2_DEFAULT_CHANNEL, + /*! + * LoRaWAN channels mask + * + * LoRaWAN Regional Parameters V1.0.2rB + */ + MIB_CHANNELS_MASK, + /*! + * LoRaWAN default channels mask + * + * LoRaWAN Regional Parameters V1.0.2rB + */ + MIB_CHANNELS_DEFAULT_MASK, + /*! + * Set the number of repetitions on a channel + * + * LoRaWAN Specification V1.0.2, chapter 5.2 + */ + MIB_CHANNELS_NB_REP, + /*! + * Maximum receive window duration in [ms] + * + * LoRaWAN Specification V1.0.2, chapter 3.3.3 + */ + MIB_MAX_RX_WINDOW_DURATION, + /*! + * Receive delay 1 in [ms] + * + * LoRaWAN Regional Parameters V1.0.2rB + */ + MIB_RECEIVE_DELAY_1, + /*! + * Receive delay 2 in [ms] + * + * LoRaWAN Regional Parameters V1.0.2rB + */ + MIB_RECEIVE_DELAY_2, + /*! + * Join accept delay 1 in [ms] + * + * LoRaWAN Regional Parameters V1.0.2rB + */ + MIB_JOIN_ACCEPT_DELAY_1, + /*! + * Join accept delay 2 in [ms] + * + * LoRaWAN Regional Parameters V1.0.2rB + */ + MIB_JOIN_ACCEPT_DELAY_2, + /*! + * Default Data rate of a channel + * + * LoRaWAN Regional Parameters V1.0.2rB + * + * The allowed ranges are region specific. Please refer to \ref DR_0 to \ref DR_15 for details. + */ + MIB_CHANNELS_DEFAULT_DATARATE, + /*! + * Data rate of a channel + * + * LoRaWAN Regional Parameters V1.0.2rB + * + * The allowed ranges are region specific. Please refer to \ref DR_0 to \ref DR_15 for details. + */ + MIB_CHANNELS_DATARATE, + /*! + * Transmission power of a channel + * + * LoRaWAN Regional Parameters V1.0.2rB + * + * The allowed ranges are region specific. Please refer to \ref TX_POWER_0 to \ref TX_POWER_15 for details. + */ + MIB_CHANNELS_TX_POWER, + /*! + * Transmission power of a channel + * + * LoRaWAN Regional Parameters V1.0.2rB + * + * The allowed ranges are region specific. Please refer to \ref TX_POWER_0 to \ref TX_POWER_15 for details. + */ + MIB_CHANNELS_DEFAULT_TX_POWER, + /*! + * LoRaWAN Up-link counter + * + * LoRaWAN Specification V1.0.2, chapter 4.3.1.5 + */ + MIB_UPLINK_COUNTER, + /*! + * LoRaWAN Down-link counter + * + * LoRaWAN Specification V1.0.2, chapter 4.3.1.5 + */ + MIB_DOWNLINK_COUNTER, + /*! + * Multicast channels. A get request will return a pointer to the first + * entry of the multicast channel linked list. If the pointer is equal to + * NULL, the list is empty. + */ + MIB_MULTICAST_CHANNEL, + /*! + * System overall timing error in milliseconds. + * [-SystemMaxRxError : +SystemMaxRxError] + * Default: +/-10 ms + */ + MIB_SYSTEM_MAX_RX_ERROR, + /*! + * Minimum required number of symbols to detect an Rx frame + * Default: 6 symbols + */ + MIB_MIN_RX_SYMBOLS, + /*! + * Antenna gain of the node. Default value is region specific. + * The antenna gain is used to calculate the TX power of the node. + * The formula is: + * radioTxPower = ( int8_t )floor( maxEirp - antennaGain ) + */ + MIB_ANTENNA_GAIN +}Mib_t; + +/*! + * LoRaMAC MIB parameters + */ +typedef union uMibParam +{ + /*! + * LoRaWAN device class + * + * Related MIB type: \ref MIB_DEVICE_CLASS + */ + DeviceClass_t Class; + /*! + * LoRaWAN network joined attribute + * + * Related MIB type: \ref MIB_NETWORK_JOINED + */ + bool IsNetworkJoined; + /*! + * Activation state of ADR + * + * Related MIB type: \ref MIB_ADR + */ + bool AdrEnable; + /*! + * Network identifier + * + * Related MIB type: \ref MIB_NET_ID + */ + uint32_t NetID; + /*! + * End-device address + * + * Related MIB type: \ref MIB_DEV_ADDR + */ + uint32_t DevAddr; + /*! + * Network session key + * + * Related MIB type: \ref MIB_NWK_SKEY + */ + uint8_t *NwkSKey; + /*! + * Application session key + * + * Related MIB type: \ref MIB_APP_SKEY + */ + uint8_t *AppSKey; + /*! + * Enable or disable a public network + * + * Related MIB type: \ref MIB_PUBLIC_NETWORK + */ + bool EnablePublicNetwork; + /*! + * Enable or disable repeater support + * + * Related MIB type: \ref MIB_REPEATER_SUPPORT + */ + bool EnableRepeaterSupport; + /*! + * LoRaWAN Channel + * + * Related MIB type: \ref MIB_CHANNELS + */ + ChannelParams_t* ChannelList; + /*! + * Channel for the receive window 2 + * + * Related MIB type: \ref MIB_RX2_CHANNEL + */ + Rx2ChannelParams_t Rx2Channel; + /*! + * Channel for the receive window 2 + * + * Related MIB type: \ref MIB_RX2_DEFAULT_CHANNEL + */ + Rx2ChannelParams_t Rx2DefaultChannel; + /*! + * Channel mask + * + * Related MIB type: \ref MIB_CHANNELS_MASK + */ + uint16_t* ChannelsMask; + /*! + * Default channel mask + * + * Related MIB type: \ref MIB_CHANNELS_DEFAULT_MASK + */ + uint16_t* ChannelsDefaultMask; + /*! + * Number of frame repetitions + * + * Related MIB type: \ref MIB_CHANNELS_NB_REP + */ + uint8_t ChannelNbRep; + /*! + * Maximum receive window duration + * + * Related MIB type: \ref MIB_MAX_RX_WINDOW_DURATION + */ + uint32_t MaxRxWindow; + /*! + * Receive delay 1 + * + * Related MIB type: \ref MIB_RECEIVE_DELAY_1 + */ + uint32_t ReceiveDelay1; + /*! + * Receive delay 2 + * + * Related MIB type: \ref MIB_RECEIVE_DELAY_2 + */ + uint32_t ReceiveDelay2; + /*! + * Join accept delay 1 + * + * Related MIB type: \ref MIB_JOIN_ACCEPT_DELAY_1 + */ + uint32_t JoinAcceptDelay1; + /*! + * Join accept delay 2 + * + * Related MIB type: \ref MIB_JOIN_ACCEPT_DELAY_2 + */ + uint32_t JoinAcceptDelay2; + /*! + * Channels data rate + * + * Related MIB type: \ref MIB_CHANNELS_DEFAULT_DATARATE + */ + int8_t ChannelsDefaultDatarate; + /*! + * Channels data rate + * + * Related MIB type: \ref MIB_CHANNELS_DATARATE + */ + int8_t ChannelsDatarate; + /*! + * Channels TX power + * + * Related MIB type: \ref MIB_CHANNELS_DEFAULT_TX_POWER + */ + int8_t ChannelsDefaultTxPower; + /*! + * Channels TX power + * + * Related MIB type: \ref MIB_CHANNELS_TX_POWER + */ + int8_t ChannelsTxPower; + /*! + * LoRaWAN Up-link counter + * + * Related MIB type: \ref MIB_UPLINK_COUNTER + */ + uint32_t UpLinkCounter; + /*! + * LoRaWAN Down-link counter + * + * Related MIB type: \ref MIB_DOWNLINK_COUNTER + */ + uint32_t DownLinkCounter; + /*! + * Multicast channel + * + * Related MIB type: \ref MIB_MULTICAST_CHANNEL + */ + MulticastParams_t* MulticastList; + /*! + * System overall timing error in milliseconds. + * + * Related MIB type: \ref MIB_SYSTEM_MAX_RX_ERROR + */ + uint32_t SystemMaxRxError; + /*! + * Minimum required number of symbols to detect an Rx frame + * + * Related MIB type: \ref MIB_MIN_RX_SYMBOLS + */ + uint8_t MinRxSymbols; + /*! + * Antenna gain + * + * Related MIB type: \ref MIB_ANTENNA_GAIN + */ + float AntennaGain; +}MibParam_t; + +/*! + * LoRaMAC MIB-RequestConfirm structure + */ +typedef struct eMibRequestConfirm +{ + /*! + * MIB-Request type + */ + Mib_t Type; + + /*! + * MLME-RequestConfirm parameters + */ + MibParam_t Param; +}MibRequestConfirm_t; + +/*! + * LoRaMAC tx information + */ +typedef struct sLoRaMacTxInfo +{ + /*! + * Defines the size of the applicative payload which can be processed + */ + uint8_t MaxPossiblePayload; + /*! + * The current payload size, dependent on the current datarate + */ + uint8_t CurrentPayloadSize; +}LoRaMacTxInfo_t; + +/*! + * LoRaMAC Status + */ +typedef enum eLoRaMacStatus +{ + /*! + * Service started successfully + */ + LORAMAC_STATUS_OK, + /*! + * Service not started - LoRaMAC is busy + */ + LORAMAC_STATUS_BUSY, + /*! + * Service unknown + */ + LORAMAC_STATUS_SERVICE_UNKNOWN, + /*! + * Service not started - invalid parameter + */ + LORAMAC_STATUS_PARAMETER_INVALID, + /*! + * Service not started - invalid frequency + */ + LORAMAC_STATUS_FREQUENCY_INVALID, + /*! + * Service not started - invalid datarate + */ + LORAMAC_STATUS_DATARATE_INVALID, + /*! + * Service not started - invalid frequency and datarate + */ + LORAMAC_STATUS_FREQ_AND_DR_INVALID, + /*! + * Service not started - the device is not in a LoRaWAN + */ + LORAMAC_STATUS_NO_NETWORK_JOINED, + /*! + * Service not started - payload length error + */ + LORAMAC_STATUS_LENGTH_ERROR, + /*! + * Service not started - the device is switched off + */ + LORAMAC_STATUS_DEVICE_OFF, + /*! + * Service not started - the specified region is not supported + * or not activated with preprocessor definitions. + */ + LORAMAC_STATUS_REGION_NOT_SUPPORTED +}LoRaMacStatus_t; + +/*! + * LoRaMAC region enumeration + */ +typedef enum eLoRaMacRegion_t +{ + /*! + * AS band on 923MHz + */ + LORAMAC_REGION_AS923, + /*! + * Australian band on 915MHz + */ + LORAMAC_REGION_AU915, + /*! + * Chinese band on 470MHz + */ + LORAMAC_REGION_CN470, + /*! + * Chinese band on 779MHz + */ + LORAMAC_REGION_CN779, + /*! + * European band on 433MHz + */ + LORAMAC_REGION_EU433, + /*! + * European band on 868MHz + */ + LORAMAC_REGION_EU868, + /*! + * South korean band on 920MHz + */ + LORAMAC_REGION_KR920, + /*! + * India band on 865MHz + */ + LORAMAC_REGION_IN865, + /*! + * North american band on 915MHz + */ + LORAMAC_REGION_US915, + /*! + * North american band on 915MHz with a maximum of 16 channels + */ + LORAMAC_REGION_US915_HYBRID, +}LoRaMacRegion_t; + +/*! + * LoRaMAC events structure + * Used to notify upper layers of MAC events + */ +typedef struct sLoRaMacPrimitives +{ + /*! + * \brief MCPS-Confirm primitive + * + * \param [OUT] MCPS-Confirm parameters + */ + void ( *MacMcpsConfirm )( McpsConfirm_t *McpsConfirm ); + /*! + * \brief MCPS-Indication primitive + * + * \param [OUT] MCPS-Indication parameters + */ + void ( *MacMcpsIndication )( McpsIndication_t *McpsIndication ); + /*! + * \brief MLME-Confirm primitive + * + * \param [OUT] MLME-Confirm parameters + */ + void ( *MacMlmeConfirm )( MlmeConfirm_t *MlmeConfirm ); +}LoRaMacPrimitives_t; + +/*! + * LoRaMAC callback structure + */ +typedef struct sLoRaMacCallback +{ + /*! + * \brief Measures the battery level + * + * \retval Battery level [0: node is connected to an external + * power source, 1..254: battery level, where 1 is the minimum + * and 254 is the maximum value, 255: the node was not able + * to measure the battery level] + */ + uint8_t ( *GetBatteryLevel )( void ); +}LoRaMacCallback_t; + +/*! + * LoRaMAC Max EIRP (dBm) table + */ +static const uint8_t LoRaMacMaxEirpTable[] = { 8, 10, 12, 13, 14, 16, 18, 20, 21, 24, 26, 27, 29, 30, 33, 36 }; + + + +/*! + * \brief LoRaMAC layer initialization + * + * \details In addition to the initialization of the LoRaMAC layer, this + * function initializes the callback primitives of the MCPS and + * MLME services. Every data field of \ref LoRaMacPrimitives_t must be + * set to a valid callback function. + * + * \param [IN] primitives - Pointer to a structure defining the LoRaMAC + * event functions. Refer to \ref LoRaMacPrimitives_t. + * + * \param [IN] events - Pointer to a structure defining the LoRaMAC + * callback functions. Refer to \ref LoRaMacCallback_t. + * + * \param [IN] region - The region to start. + * + * \retval LoRaMacStatus_t Status of the operation. Possible returns are: + * returns are: + * \ref LORAMAC_STATUS_OK, + * \ref LORAMAC_STATUS_PARAMETER_INVALID, + * \ref LORAMAC_STATUS_REGION_NOT_SUPPORTED. + */ +LoRaMacStatus_t LoRaMacInitialization( LoRaMacPrimitives_t *primitives, LoRaMacCallback_t *callbacks, LoRaMacRegion_t region ); + +/*! + * \brief Queries the LoRaMAC if it is possible to send the next frame with + * a given payload size. The LoRaMAC takes scheduled MAC commands into + * account and reports, when the frame can be send or not. + * + * \param [IN] size - Size of applicative payload to be send next + * + * \param [OUT] txInfo - The structure \ref LoRaMacTxInfo_t contains + * information about the actual maximum payload possible + * ( according to the configured datarate or the next + * datarate according to ADR ), and the maximum frame + * size, taking the scheduled MAC commands into account. + * + * \retval LoRaMacStatus_t Status of the operation. When the parameters are + * not valid, the function returns \ref LORAMAC_STATUS_PARAMETER_INVALID. + * In case of a length error caused by the applicative payload in combination + * with the MAC commands, the function returns \ref LORAMAC_STATUS_LENGTH_ERROR. + * Please note that if the size of the MAC commands which are in the queue do + * not fit into the payload size on the related datarate, the LoRaMAC will + * omit the MAC commands. + * In case the query is valid, and the LoRaMAC is able to send the frame, + * the function returns \ref LORAMAC_STATUS_OK. + */ +LoRaMacStatus_t LoRaMacQueryTxPossible( uint8_t size, LoRaMacTxInfo_t* txInfo ); + +/*! + * \brief LoRaMAC channel add service + * + * \details Adds a new channel to the channel list and activates the id in + * the channel mask. Please note that this functionality is not available + * on all regions. Information about allowed ranges are available at the LoRaWAN Regional Parameters V1.0.2rB + * + * \param [IN] id - Id of the channel. + * + * \param [IN] params - Channel parameters to set. + * + * \retval LoRaMacStatus_t Status of the operation. Possible returns are: + * \ref LORAMAC_STATUS_OK, + * \ref LORAMAC_STATUS_BUSY, + * \ref LORAMAC_STATUS_PARAMETER_INVALID. + */ +LoRaMacStatus_t LoRaMacChannelAdd( uint8_t id, ChannelParams_t params ); + +/*! + * \brief LoRaMAC channel remove service + * + * \details Deactivates the id in the channel mask. + * + * \param [IN] id - Id of the channel. + * + * \retval LoRaMacStatus_t Status of the operation. Possible returns are: + * \ref LORAMAC_STATUS_OK, + * \ref LORAMAC_STATUS_BUSY, + * \ref LORAMAC_STATUS_PARAMETER_INVALID. + */ +LoRaMacStatus_t LoRaMacChannelRemove( uint8_t id ); + +/*! + * \brief LoRaMAC multicast channel link service + * + * \details Links a multicast channel into the linked list. + * + * \param [IN] channelParam - Multicast channel parameters to link. + * + * \retval LoRaMacStatus_t Status of the operation. Possible returns are: + * \ref LORAMAC_STATUS_OK, + * \ref LORAMAC_STATUS_BUSY, + * \ref LORAMAC_STATUS_PARAMETER_INVALID. + */ +LoRaMacStatus_t LoRaMacMulticastChannelLink( MulticastParams_t *channelParam ); + +/*! + * \brief LoRaMAC multicast channel unlink service + * + * \details Unlinks a multicast channel from the linked list. + * + * \param [IN] channelParam - Multicast channel parameters to unlink. + * + * \retval LoRaMacStatus_t Status of the operation. Possible returns are: + * \ref LORAMAC_STATUS_OK, + * \ref LORAMAC_STATUS_BUSY, + * \ref LORAMAC_STATUS_PARAMETER_INVALID. + */ +LoRaMacStatus_t LoRaMacMulticastChannelUnlink( MulticastParams_t *channelParam ); + +/*! + * \brief LoRaMAC MIB-Get + * + * \details The mac information base service to get attributes of the LoRaMac + * layer. + * + * The following code-snippet shows how to use the API to get the + * parameter AdrEnable, defined by the enumeration type + * \ref MIB_ADR. + * \code + * MibRequestConfirm_t mibReq; + * mibReq.Type = MIB_ADR; + * + * if( LoRaMacMibGetRequestConfirm( &mibReq ) == LORAMAC_STATUS_OK ) + * { + * // LoRaMAC updated the parameter mibParam.AdrEnable + * } + * \endcode + * + * \param [IN] mibRequest - MIB-GET-Request to perform. Refer to \ref MibRequestConfirm_t. + * + * \retval LoRaMacStatus_t Status of the operation. Possible returns are: + * \ref LORAMAC_STATUS_OK, + * \ref LORAMAC_STATUS_SERVICE_UNKNOWN, + * \ref LORAMAC_STATUS_PARAMETER_INVALID. + */ +LoRaMacStatus_t LoRaMacMibGetRequestConfirm( MibRequestConfirm_t *mibGet ); + +/*! + * \brief LoRaMAC MIB-Set + * + * \details The mac information base service to set attributes of the LoRaMac + * layer. + * + * The following code-snippet shows how to use the API to set the + * parameter AdrEnable, defined by the enumeration type + * \ref MIB_ADR. + * + * \code + * MibRequestConfirm_t mibReq; + * mibReq.Type = MIB_ADR; + * mibReq.Param.AdrEnable = true; + * + * if( LoRaMacMibGetRequestConfirm( &mibReq ) == LORAMAC_STATUS_OK ) + * { + * // LoRaMAC updated the parameter + * } + * \endcode + * + * \param [IN] mibRequest - MIB-SET-Request to perform. Refer to \ref MibRequestConfirm_t. + * + * \retval LoRaMacStatus_t Status of the operation. Possible returns are: + * \ref LORAMAC_STATUS_OK, + * \ref LORAMAC_STATUS_BUSY, + * \ref LORAMAC_STATUS_SERVICE_UNKNOWN, + * \ref LORAMAC_STATUS_PARAMETER_INVALID. + */ +LoRaMacStatus_t LoRaMacMibSetRequestConfirm( MibRequestConfirm_t *mibSet ); + +/*! + * \brief LoRaMAC MLME-Request + * + * \details The Mac layer management entity handles management services. The + * following code-snippet shows how to use the API to perform a + * network join request. + * + * \code + * static uint8_t DevEui[] = + * { + * 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 + * }; + * static uint8_t AppEui[] = + * { + * 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 + * }; + * static uint8_t AppKey[] = + * { + * 0x2B, 0x7E, 0x15, 0x16, 0x28, 0xAE, 0xD2, 0xA6, + * 0xAB, 0xF7, 0x15, 0x88, 0x09, 0xCF, 0x4F, 0x3C + * }; + * + * MlmeReq_t mlmeReq; + * mlmeReq.Type = MLME_JOIN; + * mlmeReq.Req.Join.DevEui = DevEui; + * mlmeReq.Req.Join.AppEui = AppEui; + * mlmeReq.Req.Join.AppKey = AppKey; + * + * if( LoRaMacMlmeRequest( &mlmeReq ) == LORAMAC_STATUS_OK ) + * { + * // Service started successfully. Waiting for the Mlme-Confirm event + * } + * \endcode + * + * \param [IN] mlmeRequest - MLME-Request to perform. Refer to \ref MlmeReq_t. + * + * \retval LoRaMacStatus_t Status of the operation. Possible returns are: + * \ref LORAMAC_STATUS_OK, + * \ref LORAMAC_STATUS_BUSY, + * \ref LORAMAC_STATUS_SERVICE_UNKNOWN, + * \ref LORAMAC_STATUS_PARAMETER_INVALID, + * \ref LORAMAC_STATUS_NO_NETWORK_JOINED, + * \ref LORAMAC_STATUS_LENGTH_ERROR, + * \ref LORAMAC_STATUS_DEVICE_OFF. + */ +LoRaMacStatus_t LoRaMacMlmeRequest( MlmeReq_t *mlmeRequest ); + +/*! + * \brief LoRaMAC MCPS-Request + * + * \details The Mac Common Part Sublayer handles data services. The following + * code-snippet shows how to use the API to send an unconfirmed + * LoRaMAC frame. + * + * \code + * uint8_t myBuffer[] = { 1, 2, 3 }; + * + * McpsReq_t mcpsReq; + * mcpsReq.Type = MCPS_UNCONFIRMED; + * mcpsReq.Req.Unconfirmed.fPort = 1; + * mcpsReq.Req.Unconfirmed.fBuffer = myBuffer; + * mcpsReq.Req.Unconfirmed.fBufferSize = sizeof( myBuffer ); + * + * if( LoRaMacMcpsRequest( &mcpsReq ) == LORAMAC_STATUS_OK ) + * { + * // Service started successfully. Waiting for the MCPS-Confirm event + * } + * \endcode + * + * \param [IN] mcpsRequest - MCPS-Request to perform. Refer to \ref McpsReq_t. + * + * \retval LoRaMacStatus_t Status of the operation. Possible returns are: + * \ref LORAMAC_STATUS_OK, + * \ref LORAMAC_STATUS_BUSY, + * \ref LORAMAC_STATUS_SERVICE_UNKNOWN, + * \ref LORAMAC_STATUS_PARAMETER_INVALID, + * \ref LORAMAC_STATUS_NO_NETWORK_JOINED, + * \ref LORAMAC_STATUS_LENGTH_ERROR, + * \ref LORAMAC_STATUS_DEVICE_OFF. + */ +LoRaMacStatus_t LoRaMacMcpsRequest( McpsReq_t *mcpsRequest ); + +/*! \} defgroup LORAMAC */ + +#endif // __LORAMAC_H__ diff --git a/src/mac/LoRaMacCrypto.c b/src/mac/LoRaMacCrypto.c new file mode 100755 index 0000000..94026c4 --- /dev/null +++ b/src/mac/LoRaMacCrypto.c @@ -0,0 +1,202 @@ +/* + / _____) _ | | +( (____ _____ ____ _| |_ _____ ____| |__ + \____ \| ___ | (_ _) ___ |/ ___) _ \ + _____) ) ____| | | || |_| ____( (___| | | | +(______/|_____)_|_|_| \__)_____)\____)_| |_| + (C)2013 Semtech + ___ _____ _ ___ _ _____ ___ ___ ___ ___ +/ __|_ _/_\ / __| |/ / __/ _ \| _ \/ __| __| +\__ \ | |/ _ \ (__| ' <| _| (_) | / (__| _| +|___/ |_/_/ \_\___|_|\_\_| \___/|_|_\\___|___| +embedded.connectivity.solutions=============== + +Description: LoRa MAC layer implementation + +License: Revised BSD License, see LICENSE.TXT file include in the project + +Maintainer: Miguel Luis ( Semtech ), Gregory Cristian ( Semtech ) and Daniel Jaeckle ( STACKFORCE ) +*/ +#include +#include +#include "utilities.h" + +#include "aes.h" +#include "cmac.h" + +#include "LoRaMacCrypto.h" + +/*! + * CMAC/AES Message Integrity Code (MIC) Block B0 size + */ +#define LORAMAC_MIC_BLOCK_B0_SIZE 16 + +/*! + * MIC field computation initial data + */ +static uint8_t MicBlockB0[] = { 0x49, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 + }; + +/*! + * Contains the computed MIC field. + * + * \remark Only the 4 first bytes are used + */ +static uint8_t Mic[16]; + +/*! + * Encryption aBlock and sBlock + */ +static uint8_t aBlock[] = { 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 + }; +static uint8_t sBlock[] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 + }; + +/*! + * AES computation context variable + */ +static aes_context AesContext; + +/*! + * CMAC computation context variable + */ +static AES_CMAC_CTX AesCmacCtx[1]; + +/*! + * \brief Computes the LoRaMAC frame MIC field + * + * \param [IN] buffer Data buffer + * \param [IN] size Data buffer size + * \param [IN] key AES key to be used + * \param [IN] address Frame address + * \param [IN] dir Frame direction [0: uplink, 1: downlink] + * \param [IN] sequenceCounter Frame sequence counter + * \param [OUT] mic Computed MIC field + */ +void LoRaMacComputeMic( const uint8_t *buffer, uint16_t size, const uint8_t *key, uint32_t address, uint8_t dir, uint32_t sequenceCounter, uint32_t *mic ) +{ + MicBlockB0[5] = dir; + + MicBlockB0[6] = ( address ) & 0xFF; + MicBlockB0[7] = ( address >> 8 ) & 0xFF; + MicBlockB0[8] = ( address >> 16 ) & 0xFF; + MicBlockB0[9] = ( address >> 24 ) & 0xFF; + + MicBlockB0[10] = ( sequenceCounter ) & 0xFF; + MicBlockB0[11] = ( sequenceCounter >> 8 ) & 0xFF; + MicBlockB0[12] = ( sequenceCounter >> 16 ) & 0xFF; + MicBlockB0[13] = ( sequenceCounter >> 24 ) & 0xFF; + + MicBlockB0[15] = size & 0xFF; + + AES_CMAC_Init( AesCmacCtx ); + + AES_CMAC_SetKey( AesCmacCtx, key ); + + AES_CMAC_Update( AesCmacCtx, MicBlockB0, LORAMAC_MIC_BLOCK_B0_SIZE ); + + AES_CMAC_Update( AesCmacCtx, buffer, size & 0xFF ); + + AES_CMAC_Final( Mic, AesCmacCtx ); + + *mic = ( uint32_t )( ( uint32_t )Mic[3] << 24 | ( uint32_t )Mic[2] << 16 | ( uint32_t )Mic[1] << 8 | ( uint32_t )Mic[0] ); +} + +void LoRaMacPayloadEncrypt( const uint8_t *buffer, uint16_t size, const uint8_t *key, uint32_t address, uint8_t dir, uint32_t sequenceCounter, uint8_t *encBuffer ) +{ + uint16_t i; + uint8_t bufferIndex = 0; + uint16_t ctr = 1; + + memset1( AesContext.ksch, '\0', 240 ); + aes_set_key( key, 16, &AesContext ); + + aBlock[5] = dir; + + aBlock[6] = ( address ) & 0xFF; + aBlock[7] = ( address >> 8 ) & 0xFF; + aBlock[8] = ( address >> 16 ) & 0xFF; + aBlock[9] = ( address >> 24 ) & 0xFF; + + aBlock[10] = ( sequenceCounter ) & 0xFF; + aBlock[11] = ( sequenceCounter >> 8 ) & 0xFF; + aBlock[12] = ( sequenceCounter >> 16 ) & 0xFF; + aBlock[13] = ( sequenceCounter >> 24 ) & 0xFF; + + while( size >= 16 ) + { + aBlock[15] = ( ( ctr ) & 0xFF ); + ctr++; + aes_encrypt( aBlock, sBlock, &AesContext ); + for( i = 0; i < 16; i++ ) + { + encBuffer[bufferIndex + i] = buffer[bufferIndex + i] ^ sBlock[i]; + } + size -= 16; + bufferIndex += 16; + } + + if( size > 0 ) + { + aBlock[15] = ( ( ctr ) & 0xFF ); + aes_encrypt( aBlock, sBlock, &AesContext ); + for( i = 0; i < size; i++ ) + { + encBuffer[bufferIndex + i] = buffer[bufferIndex + i] ^ sBlock[i]; + } + } +} + +void LoRaMacPayloadDecrypt( const uint8_t *buffer, uint16_t size, const uint8_t *key, uint32_t address, uint8_t dir, uint32_t sequenceCounter, uint8_t *decBuffer ) +{ + LoRaMacPayloadEncrypt( buffer, size, key, address, dir, sequenceCounter, decBuffer ); +} + +void LoRaMacJoinComputeMic( const uint8_t *buffer, uint16_t size, const uint8_t *key, uint32_t *mic ) +{ + AES_CMAC_Init( AesCmacCtx ); + + AES_CMAC_SetKey( AesCmacCtx, key ); + + AES_CMAC_Update( AesCmacCtx, buffer, size & 0xFF ); + + AES_CMAC_Final( Mic, AesCmacCtx ); + + *mic = ( uint32_t )( ( uint32_t )Mic[3] << 24 | ( uint32_t )Mic[2] << 16 | ( uint32_t )Mic[1] << 8 | ( uint32_t )Mic[0] ); +} + +void LoRaMacJoinDecrypt( const uint8_t *buffer, uint16_t size, const uint8_t *key, uint8_t *decBuffer ) +{ + memset1( AesContext.ksch, '\0', 240 ); + aes_set_key( key, 16, &AesContext ); + aes_encrypt( buffer, decBuffer, &AesContext ); + // Check if optional CFList is included + if( size >= 16 ) + { + aes_encrypt( buffer + 16, decBuffer + 16, &AesContext ); + } +} + +void LoRaMacJoinComputeSKeys( const uint8_t *key, const uint8_t *appNonce, uint16_t devNonce, uint8_t *nwkSKey, uint8_t *appSKey ) +{ + uint8_t nonce[16]; + uint8_t *pDevNonce = ( uint8_t * )&devNonce; + + memset1( AesContext.ksch, '\0', 240 ); + aes_set_key( key, 16, &AesContext ); + + memset1( nonce, 0, sizeof( nonce ) ); + nonce[0] = 0x01; + memcpy1( nonce + 1, appNonce, 6 ); + memcpy1( nonce + 7, pDevNonce, 2 ); + aes_encrypt( nonce, nwkSKey, &AesContext ); + + memset1( nonce, 0, sizeof( nonce ) ); + nonce[0] = 0x02; + memcpy1( nonce + 1, appNonce, 6 ); + memcpy1( nonce + 7, pDevNonce, 2 ); + aes_encrypt( nonce, appSKey, &AesContext ); +} diff --git a/src/mac/LoRaMacCrypto.h b/src/mac/LoRaMacCrypto.h new file mode 100755 index 0000000..b4780ce --- /dev/null +++ b/src/mac/LoRaMacCrypto.h @@ -0,0 +1,111 @@ +/*! + * \file LoRaMacCrypto.h + * + * \brief LoRa MAC layer cryptography implementation + * + * \copyright Revised BSD License, see section \ref LICENSE. + * + * \code + * ______ _ + * / _____) _ | | + * ( (____ _____ ____ _| |_ _____ ____| |__ + * \____ \| ___ | (_ _) ___ |/ ___) _ \ + * _____) ) ____| | | || |_| ____( (___| | | | + * (______/|_____)_|_|_| \__)_____)\____)_| |_| + * (C)2013 Semtech + * + * ___ _____ _ ___ _ _____ ___ ___ ___ ___ + * / __|_ _/_\ / __| |/ / __/ _ \| _ \/ __| __| + * \__ \ | |/ _ \ (__| ' <| _| (_) | / (__| _| + * |___/ |_/_/ \_\___|_|\_\_| \___/|_|_\\___|___| + * embedded.connectivity.solutions=============== + * + * \endcode + * + * \author Miguel Luis ( Semtech ) + * + * \author Gregory Cristian ( Semtech ) + * + * \author Daniel Jaeckle ( STACKFORCE ) + * + * \defgroup LORAMAC_CRYPTO LoRa MAC layer cryptography implementation + * This module covers the implementation of cryptographic functions + * of the LoRaMAC layer. + * \{ + */ +#ifndef __LORAMAC_CRYPTO_H__ +#define __LORAMAC_CRYPTO_H__ + +/*! + * Computes the LoRaMAC frame MIC field + * + * \param [IN] buffer - Data buffer + * \param [IN] size - Data buffer size + * \param [IN] key - AES key to be used + * \param [IN] address - Frame address + * \param [IN] dir - Frame direction [0: uplink, 1: downlink] + * \param [IN] sequenceCounter - Frame sequence counter + * \param [OUT] mic - Computed MIC field + */ +void LoRaMacComputeMic( const uint8_t *buffer, uint16_t size, const uint8_t *key, uint32_t address, uint8_t dir, uint32_t sequenceCounter, uint32_t *mic ); + +/*! + * Computes the LoRaMAC payload encryption + * + * \param [IN] buffer - Data buffer + * \param [IN] size - Data buffer size + * \param [IN] key - AES key to be used + * \param [IN] address - Frame address + * \param [IN] dir - Frame direction [0: uplink, 1: downlink] + * \param [IN] sequenceCounter - Frame sequence counter + * \param [OUT] encBuffer - Encrypted buffer + */ +void LoRaMacPayloadEncrypt( const uint8_t *buffer, uint16_t size, const uint8_t *key, uint32_t address, uint8_t dir, uint32_t sequenceCounter, uint8_t *encBuffer ); + +/*! + * Computes the LoRaMAC payload decryption + * + * \param [IN] buffer - Data buffer + * \param [IN] size - Data buffer size + * \param [IN] key - AES key to be used + * \param [IN] address - Frame address + * \param [IN] dir - Frame direction [0: uplink, 1: downlink] + * \param [IN] sequenceCounter - Frame sequence counter + * \param [OUT] decBuffer - Decrypted buffer + */ +void LoRaMacPayloadDecrypt( const uint8_t *buffer, uint16_t size, const uint8_t *key, uint32_t address, uint8_t dir, uint32_t sequenceCounter, uint8_t *decBuffer ); + +/*! + * Computes the LoRaMAC Join Request frame MIC field + * + * \param [IN] buffer - Data buffer + * \param [IN] size - Data buffer size + * \param [IN] key - AES key to be used + * \param [OUT] mic - Computed MIC field + */ +void LoRaMacJoinComputeMic( const uint8_t *buffer, uint16_t size, const uint8_t *key, uint32_t *mic ); + +/*! + * Computes the LoRaMAC join frame decryption + * + * \param [IN] buffer - Data buffer + * \param [IN] size - Data buffer size + * \param [IN] key - AES key to be used + * \param [OUT] decBuffer - Decrypted buffer + */ +void LoRaMacJoinDecrypt( const uint8_t *buffer, uint16_t size, const uint8_t *key, uint8_t *decBuffer ); + +/*! + * Computes the LoRaMAC join frame decryption + * + * \param [IN] key - AES key to be used + * \param [IN] appNonce - Application nonce + * \param [IN] devNonce - Device nonce + * \param [OUT] nwkSKey - Network session key + * \param [OUT] appSKey - Application session key + */ +void LoRaMacJoinComputeSKeys( const uint8_t *key, const uint8_t *appNonce, uint16_t devNonce, uint8_t *nwkSKey, uint8_t *appSKey ); + +/*! \} defgroup LORAMAC */ + +#endif // __LORAMAC_CRYPTO_H__ diff --git a/src/mac/LoRaMacTest.h b/src/mac/LoRaMacTest.h new file mode 100755 index 0000000..e1a04c4 --- /dev/null +++ b/src/mac/LoRaMacTest.h @@ -0,0 +1,81 @@ +/*! + * \file LoRaMacTest.h + * + * \brief LoRa MAC layer test function implementation + * + * \copyright Revised BSD License, see section \ref LICENSE. + * + * \code + * ______ _ + * / _____) _ | | + * ( (____ _____ ____ _| |_ _____ ____| |__ + * \____ \| ___ | (_ _) ___ |/ ___) _ \ + * _____) ) ____| | | || |_| ____( (___| | | | + * (______/|_____)_|_|_| \__)_____)\____)_| |_| + * (C)2013 Semtech + * + * ___ _____ _ ___ _ _____ ___ ___ ___ ___ + * / __|_ _/_\ / __| |/ / __/ _ \| _ \/ __| __| + * \__ \ | |/ _ \ (__| ' <| _| (_) | / (__| _| + * |___/ |_/_/ \_\___|_|\_\_| \___/|_|_\\___|___| + * embedded.connectivity.solutions=============== + * + * \endcode + * + * \author Miguel Luis ( Semtech ) + * + * \author Gregory Cristian ( Semtech ) + * + * \author Daniel Jaeckle ( STACKFORCE ) + * + * \defgroup LORAMACTEST LoRa MAC layer test function implementation + * This module specifies the API implementation of test function of the LoRaMAC layer. + * The functions in this file are only for testing purposes only. + * \{ + */ +#ifndef __LORAMACTEST_H__ +#define __LORAMACTEST_H__ + +/*! + * \brief Enabled or disables the reception windows + * + * \details This is a test function. It shall be used for testing purposes only. + * Changing this attribute may lead to a non-conformance LoRaMac operation. + * + * \param [IN] enable - Enabled or disables the reception windows + */ +void LoRaMacTestRxWindowsOn( bool enable ); + +/*! + * \brief Enables the MIC field test + * + * \details This is a test function. It shall be used for testing purposes only. + * Changing this attribute may lead to a non-conformance LoRaMac operation. + * + * \param [IN] txPacketCounter - Fixed Tx packet counter value + */ +void LoRaMacTestSetMic( uint16_t txPacketCounter ); + +/*! + * \brief Enabled or disables the duty cycle + * + * \details This is a test function. It shall be used for testing purposes only. + * Changing this attribute may lead to a non-conformance LoRaMac operation. + * + * \param [IN] enable - Enabled or disables the duty cycle + */ +void LoRaMacTestSetDutyCycleOn( bool enable ); + +/*! + * \brief Sets the channel index + * + * \details This is a test function. It shall be used for testing purposes only. + * Changing this attribute may lead to a non-conformance LoRaMac operation. + * + * \param [IN] channel - Channel index + */ +void LoRaMacTestSetChannel( uint8_t channel ); + +/*! \} defgroup LORAMACTEST */ + +#endif // __LORAMACTEST_H__ diff --git a/src/mac/region/Region.c b/src/mac/region/Region.c new file mode 100755 index 0000000..1d0be81 --- /dev/null +++ b/src/mac/region/Region.c @@ -0,0 +1,1037 @@ +/* + / _____) _ | | +( (____ _____ ____ _| |_ _____ ____| |__ + \____ \| ___ | (_ _) ___ |/ ___) _ \ + _____) ) ____| | | || |_| ____( (___| | | | +(______/|_____)_|_|_| \__)_____)\____)_| |_| + (C)2013 Semtech + ___ _____ _ ___ _ _____ ___ ___ ___ ___ +/ __|_ _/_\ / __| |/ / __/ _ \| _ \/ __| __| +\__ \ | |/ _ \ (__| ' <| _| (_) | / (__| _| +|___/ |_/_/ \_\___|_|\_\_| \___/|_|_\\___|___| +embedded.connectivity.solutions=============== + +Description: LoRa MAC region implementation + +License: Revised BSD License, see LICENSE.TXT file include in the project + +Maintainer: Miguel Luis ( Semtech ), Gregory Cristian ( Semtech ) and Daniel Jaeckle ( STACKFORCE ) +*/ +#include +#include +#include + +#include "timer.h" +#include "LoRaMac.h" + + + +// Regional includes +#include "Region.h" + + + +// Setup regions +#ifdef REGION_AS923 +#include "RegionAS923.h" +#define AS923_CASE case LORAMAC_REGION_AS923: +#define AS923_IS_ACTIVE( ) AS923_CASE { return true; } +#define AS923_GET_PHY_PARAM( ) AS923_CASE { return RegionAS923GetPhyParam( getPhy ); } +#define AS923_SET_BAND_TX_DONE( ) AS923_CASE { RegionAS923SetBandTxDone( txDone ); break; } +#define AS923_INIT_DEFAULTS( ) AS923_CASE { RegionAS923InitDefaults( type ); break; } +#define AS923_VERIFY( ) AS923_CASE { return RegionAS923Verify( verify, phyAttribute ); } +#define AS923_APPLY_CF_LIST( ) AS923_CASE { RegionAS923ApplyCFList( applyCFList ); break; } +#define AS923_CHAN_MASK_SET( ) AS923_CASE { return RegionAS923ChanMaskSet( chanMaskSet ); } +#define AS923_ADR_NEXT( ) AS923_CASE { return RegionAS923AdrNext( adrNext, drOut, txPowOut, adrAckCounter ); } +#define AS923_COMPUTE_RX_WINDOW_PARAMETERS( ) AS923_CASE { RegionAS923ComputeRxWindowParameters( datarate, minRxSymbols, rxError, rxConfigParams ); break; } +#define AS923_RX_CONFIG( ) AS923_CASE { return RegionAS923RxConfig( rxConfig, datarate ); } +#define AS923_TX_CONFIG( ) AS923_CASE { return RegionAS923TxConfig( txConfig, txPower, txTimeOnAir ); } +#define AS923_LINK_ADR_REQ( ) AS923_CASE { return RegionAS923LinkAdrReq( linkAdrReq, drOut, txPowOut, nbRepOut, nbBytesParsed ); } +#define AS923_RX_PARAM_SETUP_REQ( ) AS923_CASE { return RegionAS923RxParamSetupReq( rxParamSetupReq ); } +#define AS923_NEW_CHANNEL_REQ( ) AS923_CASE { return RegionAS923NewChannelReq( newChannelReq ); } +#define AS923_TX_PARAM_SETUP_REQ( ) AS923_CASE { return RegionAS923TxParamSetupReq( txParamSetupReq ); } +#define AS923_DL_CHANNEL_REQ( ) AS923_CASE { return RegionAS923DlChannelReq( dlChannelReq ); } +#define AS923_ALTERNATE_DR( ) AS923_CASE { return RegionAS923AlternateDr( alternateDr ); } +#define AS923_CALC_BACKOFF( ) AS923_CASE { RegionAS923CalcBackOff( calcBackOff ); break; } +#define AS923_NEXT_CHANNEL( ) AS923_CASE { return RegionAS923NextChannel( nextChanParams, channel, time, aggregatedTimeOff ); } +#define AS923_CHANNEL_ADD( ) AS923_CASE { return RegionAS923ChannelAdd( channelAdd ); } +#define AS923_CHANNEL_REMOVE( ) AS923_CASE { return RegionAS923ChannelsRemove( channelRemove ); } +#define AS923_SET_CONTINUOUS_WAVE( ) AS923_CASE { RegionAS923SetContinuousWave( continuousWave ); break; } +#define AS923_APPLY_DR_OFFSET( ) AS923_CASE { return RegionAS923ApplyDrOffset( downlinkDwellTime, dr, drOffset ); } +#else +#define AS923_IS_ACTIVE( ) +#define AS923_GET_PHY_PARAM( ) +#define AS923_SET_BAND_TX_DONE( ) +#define AS923_INIT_DEFAULTS( ) +#define AS923_VERIFY( ) +#define AS923_APPLY_CF_LIST( ) +#define AS923_CHAN_MASK_SET( ) +#define AS923_ADR_NEXT( ) +#define AS923_COMPUTE_RX_WINDOW_PARAMETERS( ) +#define AS923_RX_CONFIG( ) +#define AS923_TX_CONFIG( ) +#define AS923_LINK_ADR_REQ( ) +#define AS923_RX_PARAM_SETUP_REQ( ) +#define AS923_NEW_CHANNEL_REQ( ) +#define AS923_TX_PARAM_SETUP_REQ( ) +#define AS923_DL_CHANNEL_REQ( ) +#define AS923_ALTERNATE_DR( ) +#define AS923_CALC_BACKOFF( ) +#define AS923_NEXT_CHANNEL( ) +#define AS923_CHANNEL_ADD( ) +#define AS923_CHANNEL_REMOVE( ) +#define AS923_SET_CONTINUOUS_WAVE( ) +#define AS923_APPLY_DR_OFFSET( ) +#endif + +#ifdef REGION_AU915 +#include "RegionAU915.h" +#define AU915_CASE case LORAMAC_REGION_AU915: +#define AU915_IS_ACTIVE( ) AU915_CASE { return true; } +#define AU915_GET_PHY_PARAM( ) AU915_CASE { return RegionAU915GetPhyParam( getPhy ); } +#define AU915_SET_BAND_TX_DONE( ) AU915_CASE { RegionAU915SetBandTxDone( txDone ); break; } +#define AU915_INIT_DEFAULTS( ) AU915_CASE { RegionAU915InitDefaults( type ); break; } +#define AU915_VERIFY( ) AU915_CASE { return RegionAU915Verify( verify, phyAttribute ); } +#define AU915_APPLY_CF_LIST( ) AU915_CASE { RegionAU915ApplyCFList( applyCFList ); break; } +#define AU915_CHAN_MASK_SET( ) AU915_CASE { return RegionAU915ChanMaskSet( chanMaskSet ); } +#define AU915_ADR_NEXT( ) AU915_CASE { return RegionAU915AdrNext( adrNext, drOut, txPowOut, adrAckCounter ); } +#define AU915_COMPUTE_RX_WINDOW_PARAMETERS( ) AU915_CASE { RegionAU915ComputeRxWindowParameters( datarate, minRxSymbols, rxError, rxConfigParams ); break; } +#define AU915_RX_CONFIG( ) AU915_CASE { return RegionAU915RxConfig( rxConfig, datarate ); } +#define AU915_TX_CONFIG( ) AU915_CASE { return RegionAU915TxConfig( txConfig, txPower, txTimeOnAir ); } +#define AU915_LINK_ADR_REQ( ) AU915_CASE { return RegionAU915LinkAdrReq( linkAdrReq, drOut, txPowOut, nbRepOut, nbBytesParsed ); } +#define AU915_RX_PARAM_SETUP_REQ( ) AU915_CASE { return RegionAU915RxParamSetupReq( rxParamSetupReq ); } +#define AU915_NEW_CHANNEL_REQ( ) AU915_CASE { return RegionAU915NewChannelReq( newChannelReq ); } +#define AU915_TX_PARAM_SETUP_REQ( ) AU915_CASE { return RegionAU915TxParamSetupReq( txParamSetupReq ); } +#define AU915_DL_CHANNEL_REQ( ) AU915_CASE { return RegionAU915DlChannelReq( dlChannelReq ); } +#define AU915_ALTERNATE_DR( ) AU915_CASE { return RegionAU915AlternateDr( alternateDr ); } +#define AU915_CALC_BACKOFF( ) AU915_CASE { RegionAU915CalcBackOff( calcBackOff ); break; } +#define AU915_NEXT_CHANNEL( ) AU915_CASE { return RegionAU915NextChannel( nextChanParams, channel, time, aggregatedTimeOff ); } +#define AU915_CHANNEL_ADD( ) AU915_CASE { return RegionAU915ChannelAdd( channelAdd ); } +#define AU915_CHANNEL_REMOVE( ) AU915_CASE { return RegionAU915ChannelsRemove( channelRemove ); } +#define AU915_SET_CONTINUOUS_WAVE( ) AU915_CASE { RegionAU915SetContinuousWave( continuousWave ); break; } +#define AU915_APPLY_DR_OFFSET( ) AU915_CASE { return RegionAU915ApplyDrOffset( downlinkDwellTime, dr, drOffset ); } +#else +#define AU915_IS_ACTIVE( ) +#define AU915_GET_PHY_PARAM( ) +#define AU915_SET_BAND_TX_DONE( ) +#define AU915_INIT_DEFAULTS( ) +#define AU915_VERIFY( ) +#define AU915_APPLY_CF_LIST( ) +#define AU915_CHAN_MASK_SET( ) +#define AU915_ADR_NEXT( ) +#define AU915_COMPUTE_RX_WINDOW_PARAMETERS( ) +#define AU915_RX_CONFIG( ) +#define AU915_TX_CONFIG( ) +#define AU915_LINK_ADR_REQ( ) +#define AU915_RX_PARAM_SETUP_REQ( ) +#define AU915_NEW_CHANNEL_REQ( ) +#define AU915_TX_PARAM_SETUP_REQ( ) +#define AU915_DL_CHANNEL_REQ( ) +#define AU915_ALTERNATE_DR( ) +#define AU915_CALC_BACKOFF( ) +#define AU915_NEXT_CHANNEL( ) +#define AU915_CHANNEL_ADD( ) +#define AU915_CHANNEL_REMOVE( ) +#define AU915_SET_CONTINUOUS_WAVE( ) +#define AU915_APPLY_DR_OFFSET( ) +#endif + +#ifdef REGION_CN470 +#include "RegionCN470.h" +#define CN470_CASE case LORAMAC_REGION_CN470: +#define CN470_IS_ACTIVE( ) CN470_CASE { return true; } +#define CN470_GET_PHY_PARAM( ) CN470_CASE { return RegionCN470GetPhyParam( getPhy ); } +#define CN470_SET_BAND_TX_DONE( ) CN470_CASE { RegionCN470SetBandTxDone( txDone ); break; } +#define CN470_INIT_DEFAULTS( ) CN470_CASE { RegionCN470InitDefaults( type ); break; } +#define CN470_VERIFY( ) CN470_CASE { return RegionCN470Verify( verify, phyAttribute ); } +#define CN470_APPLY_CF_LIST( ) CN470_CASE { RegionCN470ApplyCFList( applyCFList ); break; } +#define CN470_CHAN_MASK_SET( ) CN470_CASE { return RegionCN470ChanMaskSet( chanMaskSet ); } +#define CN470_ADR_NEXT( ) CN470_CASE { return RegionCN470AdrNext( adrNext, drOut, txPowOut, adrAckCounter ); } +#define CN470_COMPUTE_RX_WINDOW_PARAMETERS( ) CN470_CASE { RegionCN470ComputeRxWindowParameters( datarate, minRxSymbols, rxError, rxConfigParams ); break; } +#define CN470_RX_CONFIG( ) CN470_CASE { return RegionCN470RxConfig( rxConfig, datarate ); } +#define CN470_TX_CONFIG( ) CN470_CASE { return RegionCN470TxConfig( txConfig, txPower, txTimeOnAir ); } +#define CN470_LINK_ADR_REQ( ) CN470_CASE { return RegionCN470LinkAdrReq( linkAdrReq, drOut, txPowOut, nbRepOut, nbBytesParsed ); } +#define CN470_RX_PARAM_SETUP_REQ( ) CN470_CASE { return RegionCN470RxParamSetupReq( rxParamSetupReq ); } +#define CN470_NEW_CHANNEL_REQ( ) CN470_CASE { return RegionCN470NewChannelReq( newChannelReq ); } +#define CN470_TX_PARAM_SETUP_REQ( ) CN470_CASE { return RegionCN470TxParamSetupReq( txParamSetupReq ); } +#define CN470_DL_CHANNEL_REQ( ) CN470_CASE { return RegionCN470DlChannelReq( dlChannelReq ); } +#define CN470_ALTERNATE_DR( ) CN470_CASE { return RegionCN470AlternateDr( alternateDr ); } +#define CN470_CALC_BACKOFF( ) CN470_CASE { RegionCN470CalcBackOff( calcBackOff ); break; } +#define CN470_NEXT_CHANNEL( ) CN470_CASE { return RegionCN470NextChannel( nextChanParams, channel, time, aggregatedTimeOff ); } +#define CN470_CHANNEL_ADD( ) CN470_CASE { return RegionCN470ChannelAdd( channelAdd ); } +#define CN470_CHANNEL_REMOVE( ) CN470_CASE { return RegionCN470ChannelsRemove( channelRemove ); } +#define CN470_SET_CONTINUOUS_WAVE( ) CN470_CASE { RegionCN470SetContinuousWave( continuousWave ); break; } +#define CN470_APPLY_DR_OFFSET( ) CN470_CASE { return RegionCN470ApplyDrOffset( downlinkDwellTime, dr, drOffset ); } +#else +#define CN470_IS_ACTIVE( ) +#define CN470_GET_PHY_PARAM( ) +#define CN470_SET_BAND_TX_DONE( ) +#define CN470_INIT_DEFAULTS( ) +#define CN470_VERIFY( ) +#define CN470_APPLY_CF_LIST( ) +#define CN470_CHAN_MASK_SET( ) +#define CN470_ADR_NEXT( ) +#define CN470_COMPUTE_RX_WINDOW_PARAMETERS( ) +#define CN470_RX_CONFIG( ) +#define CN470_TX_CONFIG( ) +#define CN470_LINK_ADR_REQ( ) +#define CN470_RX_PARAM_SETUP_REQ( ) +#define CN470_NEW_CHANNEL_REQ( ) +#define CN470_TX_PARAM_SETUP_REQ( ) +#define CN470_DL_CHANNEL_REQ( ) +#define CN470_ALTERNATE_DR( ) +#define CN470_CALC_BACKOFF( ) +#define CN470_NEXT_CHANNEL( ) +#define CN470_CHANNEL_ADD( ) +#define CN470_CHANNEL_REMOVE( ) +#define CN470_SET_CONTINUOUS_WAVE( ) +#define CN470_APPLY_DR_OFFSET( ) +#endif + +#ifdef REGION_CN779 +#include "RegionCN779.h" +#define CN779_CASE case LORAMAC_REGION_CN779: +#define CN779_IS_ACTIVE( ) CN779_CASE { return true; } +#define CN779_GET_PHY_PARAM( ) CN779_CASE { return RegionCN779GetPhyParam( getPhy ); } +#define CN779_SET_BAND_TX_DONE( ) CN779_CASE { RegionCN779SetBandTxDone( txDone ); break; } +#define CN779_INIT_DEFAULTS( ) CN779_CASE { RegionCN779InitDefaults( type ); break; } +#define CN779_VERIFY( ) CN779_CASE { return RegionCN779Verify( verify, phyAttribute ); } +#define CN779_APPLY_CF_LIST( ) CN779_CASE { RegionCN779ApplyCFList( applyCFList ); break; } +#define CN779_CHAN_MASK_SET( ) CN779_CASE { return RegionCN779ChanMaskSet( chanMaskSet ); } +#define CN779_ADR_NEXT( ) CN779_CASE { return RegionCN779AdrNext( adrNext, drOut, txPowOut, adrAckCounter ); } +#define CN779_COMPUTE_RX_WINDOW_PARAMETERS( ) CN779_CASE { RegionCN779ComputeRxWindowParameters( datarate, minRxSymbols, rxError, rxConfigParams ); break; } +#define CN779_RX_CONFIG( ) CN779_CASE { return RegionCN779RxConfig( rxConfig, datarate ); } +#define CN779_TX_CONFIG( ) CN779_CASE { return RegionCN779TxConfig( txConfig, txPower, txTimeOnAir ); } +#define CN779_LINK_ADR_REQ( ) CN779_CASE { return RegionCN779LinkAdrReq( linkAdrReq, drOut, txPowOut, nbRepOut, nbBytesParsed ); } +#define CN779_RX_PARAM_SETUP_REQ( ) CN779_CASE { return RegionCN779RxParamSetupReq( rxParamSetupReq ); } +#define CN779_NEW_CHANNEL_REQ( ) CN779_CASE { return RegionCN779NewChannelReq( newChannelReq ); } +#define CN779_TX_PARAM_SETUP_REQ( ) CN779_CASE { return RegionCN779TxParamSetupReq( txParamSetupReq ); } +#define CN779_DL_CHANNEL_REQ( ) CN779_CASE { return RegionCN779DlChannelReq( dlChannelReq ); } +#define CN779_ALTERNATE_DR( ) CN779_CASE { return RegionCN779AlternateDr( alternateDr ); } +#define CN779_CALC_BACKOFF( ) CN779_CASE { RegionCN779CalcBackOff( calcBackOff ); break; } +#define CN779_NEXT_CHANNEL( ) CN779_CASE { return RegionCN779NextChannel( nextChanParams, channel, time, aggregatedTimeOff ); } +#define CN779_CHANNEL_ADD( ) CN779_CASE { return RegionCN779ChannelAdd( channelAdd ); } +#define CN779_CHANNEL_REMOVE( ) CN779_CASE { return RegionCN779ChannelsRemove( channelRemove ); } +#define CN779_SET_CONTINUOUS_WAVE( ) CN779_CASE { RegionCN779SetContinuousWave( continuousWave ); break; } +#define CN779_APPLY_DR_OFFSET( ) CN779_CASE { return RegionCN779ApplyDrOffset( downlinkDwellTime, dr, drOffset ); } +#else +#define CN779_IS_ACTIVE( ) +#define CN779_GET_PHY_PARAM( ) +#define CN779_SET_BAND_TX_DONE( ) +#define CN779_INIT_DEFAULTS( ) +#define CN779_VERIFY( ) +#define CN779_APPLY_CF_LIST( ) +#define CN779_CHAN_MASK_SET( ) +#define CN779_ADR_NEXT( ) +#define CN779_COMPUTE_RX_WINDOW_PARAMETERS( ) +#define CN779_RX_CONFIG( ) +#define CN779_TX_CONFIG( ) +#define CN779_LINK_ADR_REQ( ) +#define CN779_RX_PARAM_SETUP_REQ( ) +#define CN779_NEW_CHANNEL_REQ( ) +#define CN779_TX_PARAM_SETUP_REQ( ) +#define CN779_DL_CHANNEL_REQ( ) +#define CN779_ALTERNATE_DR( ) +#define CN779_CALC_BACKOFF( ) +#define CN779_NEXT_CHANNEL( ) +#define CN779_CHANNEL_ADD( ) +#define CN779_CHANNEL_REMOVE( ) +#define CN779_SET_CONTINUOUS_WAVE( ) +#define CN779_APPLY_DR_OFFSET( ) +#endif + +#ifdef REGION_EU433 +#include "RegionEU433.h" +#define EU433_CASE case LORAMAC_REGION_EU433: +#define EU433_IS_ACTIVE( ) EU433_CASE { return true; } +#define EU433_GET_PHY_PARAM( ) EU433_CASE { return RegionEU433GetPhyParam( getPhy ); } +#define EU433_SET_BAND_TX_DONE( ) EU433_CASE { RegionEU433SetBandTxDone( txDone ); break; } +#define EU433_INIT_DEFAULTS( ) EU433_CASE { RegionEU433InitDefaults( type ); break; } +#define EU433_VERIFY( ) EU433_CASE { return RegionEU433Verify( verify, phyAttribute ); } +#define EU433_APPLY_CF_LIST( ) EU433_CASE { RegionEU433ApplyCFList( applyCFList ); break; } +#define EU433_CHAN_MASK_SET( ) EU433_CASE { return RegionEU433ChanMaskSet( chanMaskSet ); } +#define EU433_ADR_NEXT( ) EU433_CASE { return RegionEU433AdrNext( adrNext, drOut, txPowOut, adrAckCounter ); } +#define EU433_COMPUTE_RX_WINDOW_PARAMETERS( ) EU433_CASE { RegionEU433ComputeRxWindowParameters( datarate, minRxSymbols, rxError, rxConfigParams ); break; } +#define EU433_RX_CONFIG( ) EU433_CASE { return RegionEU433RxConfig( rxConfig, datarate ); } +#define EU433_TX_CONFIG( ) EU433_CASE { return RegionEU433TxConfig( txConfig, txPower, txTimeOnAir ); } +#define EU433_LINK_ADR_REQ( ) EU433_CASE { return RegionEU433LinkAdrReq( linkAdrReq, drOut, txPowOut, nbRepOut, nbBytesParsed ); } +#define EU433_RX_PARAM_SETUP_REQ( ) EU433_CASE { return RegionEU433RxParamSetupReq( rxParamSetupReq ); } +#define EU433_NEW_CHANNEL_REQ( ) EU433_CASE { return RegionEU433NewChannelReq( newChannelReq ); } +#define EU433_TX_PARAM_SETUP_REQ( ) EU433_CASE { return RegionEU433TxParamSetupReq( txParamSetupReq ); } +#define EU433_DL_CHANNEL_REQ( ) EU433_CASE { return RegionEU433DlChannelReq( dlChannelReq ); } +#define EU433_ALTERNATE_DR( ) EU433_CASE { return RegionEU433AlternateDr( alternateDr ); } +#define EU433_CALC_BACKOFF( ) EU433_CASE { RegionEU433CalcBackOff( calcBackOff ); break; } +#define EU433_NEXT_CHANNEL( ) EU433_CASE { return RegionEU433NextChannel( nextChanParams, channel, time, aggregatedTimeOff ); } +#define EU433_CHANNEL_ADD( ) EU433_CASE { return RegionEU433ChannelAdd( channelAdd ); } +#define EU433_CHANNEL_REMOVE( ) EU433_CASE { return RegionEU433ChannelsRemove( channelRemove ); } +#define EU433_SET_CONTINUOUS_WAVE( ) EU433_CASE { RegionEU433SetContinuousWave( continuousWave ); break; } +#define EU433_APPLY_DR_OFFSET( ) EU433_CASE { return RegionEU433ApplyDrOffset( downlinkDwellTime, dr, drOffset ); } +#else +#define EU433_IS_ACTIVE( ) +#define EU433_GET_PHY_PARAM( ) +#define EU433_SET_BAND_TX_DONE( ) +#define EU433_INIT_DEFAULTS( ) +#define EU433_VERIFY( ) +#define EU433_APPLY_CF_LIST( ) +#define EU433_CHAN_MASK_SET( ) +#define EU433_ADR_NEXT( ) +#define EU433_COMPUTE_RX_WINDOW_PARAMETERS( ) +#define EU433_RX_CONFIG( ) +#define EU433_TX_CONFIG( ) +#define EU433_LINK_ADR_REQ( ) +#define EU433_RX_PARAM_SETUP_REQ( ) +#define EU433_NEW_CHANNEL_REQ( ) +#define EU433_TX_PARAM_SETUP_REQ( ) +#define EU433_DL_CHANNEL_REQ( ) +#define EU433_ALTERNATE_DR( ) +#define EU433_CALC_BACKOFF( ) +#define EU433_NEXT_CHANNEL( ) +#define EU433_CHANNEL_ADD( ) +#define EU433_CHANNEL_REMOVE( ) +#define EU433_SET_CONTINUOUS_WAVE( ) +#define EU433_APPLY_DR_OFFSET( ) +#endif + +#ifdef REGION_EU868 +#include "RegionEU868.h" +#define EU868_CASE case LORAMAC_REGION_EU868: +#define EU868_IS_ACTIVE( ) EU868_CASE { return true; } +#define EU868_GET_PHY_PARAM( ) EU868_CASE { return RegionEU868GetPhyParam( getPhy ); } +#define EU868_SET_BAND_TX_DONE( ) EU868_CASE { RegionEU868SetBandTxDone( txDone ); break; } +#define EU868_INIT_DEFAULTS( ) EU868_CASE { RegionEU868InitDefaults( type ); break; } +#define EU868_VERIFY( ) EU868_CASE { return RegionEU868Verify( verify, phyAttribute ); } +#define EU868_APPLY_CF_LIST( ) EU868_CASE { RegionEU868ApplyCFList( applyCFList ); break; } +#define EU868_CHAN_MASK_SET( ) EU868_CASE { return RegionEU868ChanMaskSet( chanMaskSet ); } +#define EU868_ADR_NEXT( ) EU868_CASE { return RegionEU868AdrNext( adrNext, drOut, txPowOut, adrAckCounter ); } +#define EU868_COMPUTE_RX_WINDOW_PARAMETERS( ) EU868_CASE { RegionEU868ComputeRxWindowParameters( datarate, minRxSymbols, rxError, rxConfigParams ); break; } +#define EU868_RX_CONFIG( ) EU868_CASE { return RegionEU868RxConfig( rxConfig, datarate ); } +#define EU868_TX_CONFIG( ) EU868_CASE { return RegionEU868TxConfig( txConfig, txPower, txTimeOnAir ); } +#define EU868_LINK_ADR_REQ( ) EU868_CASE { return RegionEU868LinkAdrReq( linkAdrReq, drOut, txPowOut, nbRepOut, nbBytesParsed ); } +#define EU868_RX_PARAM_SETUP_REQ( ) EU868_CASE { return RegionEU868RxParamSetupReq( rxParamSetupReq ); } +#define EU868_NEW_CHANNEL_REQ( ) EU868_CASE { return RegionEU868NewChannelReq( newChannelReq ); } +#define EU868_TX_PARAM_SETUP_REQ( ) EU868_CASE { return RegionEU868TxParamSetupReq( txParamSetupReq ); } +#define EU868_DL_CHANNEL_REQ( ) EU868_CASE { return RegionEU868DlChannelReq( dlChannelReq ); } +#define EU868_ALTERNATE_DR( ) EU868_CASE { return RegionEU868AlternateDr( alternateDr ); } +#define EU868_CALC_BACKOFF( ) EU868_CASE { RegionEU868CalcBackOff( calcBackOff ); break; } +#define EU868_NEXT_CHANNEL( ) EU868_CASE { return RegionEU868NextChannel( nextChanParams, channel, time, aggregatedTimeOff ); } +#define EU868_CHANNEL_ADD( ) EU868_CASE { return RegionEU868ChannelAdd( channelAdd ); } +#define EU868_CHANNEL_REMOVE( ) EU868_CASE { return RegionEU868ChannelsRemove( channelRemove ); } +#define EU868_SET_CONTINUOUS_WAVE( ) EU868_CASE { RegionEU868SetContinuousWave( continuousWave ); break; } +#define EU868_APPLY_DR_OFFSET( ) EU868_CASE { return RegionEU868ApplyDrOffset( downlinkDwellTime, dr, drOffset ); } +#else +#define EU868_IS_ACTIVE( ) +#define EU868_GET_PHY_PARAM( ) +#define EU868_SET_BAND_TX_DONE( ) +#define EU868_INIT_DEFAULTS( ) +#define EU868_VERIFY( ) +#define EU868_APPLY_CF_LIST( ) +#define EU868_CHAN_MASK_SET( ) +#define EU868_ADR_NEXT( ) +#define EU868_COMPUTE_RX_WINDOW_PARAMETERS( ) +#define EU868_RX_CONFIG( ) +#define EU868_TX_CONFIG( ) +#define EU868_LINK_ADR_REQ( ) +#define EU868_RX_PARAM_SETUP_REQ( ) +#define EU868_NEW_CHANNEL_REQ( ) +#define EU868_TX_PARAM_SETUP_REQ( ) +#define EU868_DL_CHANNEL_REQ( ) +#define EU868_ALTERNATE_DR( ) +#define EU868_CALC_BACKOFF( ) +#define EU868_NEXT_CHANNEL( ) +#define EU868_CHANNEL_ADD( ) +#define EU868_CHANNEL_REMOVE( ) +#define EU868_SET_CONTINUOUS_WAVE( ) +#define EU868_APPLY_DR_OFFSET( ) +#endif + +#ifdef REGION_KR920 +#include "RegionKR920.h" +#define KR920_CASE case LORAMAC_REGION_KR920: +#define KR920_IS_ACTIVE( ) KR920_CASE { return true; } +#define KR920_GET_PHY_PARAM( ) KR920_CASE { return RegionKR920GetPhyParam( getPhy ); } +#define KR920_SET_BAND_TX_DONE( ) KR920_CASE { RegionKR920SetBandTxDone( txDone ); break; } +#define KR920_INIT_DEFAULTS( ) KR920_CASE { RegionKR920InitDefaults( type ); break; } +#define KR920_VERIFY( ) KR920_CASE { return RegionKR920Verify( verify, phyAttribute ); } +#define KR920_APPLY_CF_LIST( ) KR920_CASE { RegionKR920ApplyCFList( applyCFList ); break; } +#define KR920_CHAN_MASK_SET( ) KR920_CASE { return RegionKR920ChanMaskSet( chanMaskSet ); } +#define KR920_ADR_NEXT( ) KR920_CASE { return RegionKR920AdrNext( adrNext, drOut, txPowOut, adrAckCounter ); } +#define KR920_COMPUTE_RX_WINDOW_PARAMETERS( ) KR920_CASE { RegionKR920ComputeRxWindowParameters( datarate, minRxSymbols, rxError, rxConfigParams ); break; } +#define KR920_RX_CONFIG( ) KR920_CASE { return RegionKR920RxConfig( rxConfig, datarate ); } +#define KR920_TX_CONFIG( ) KR920_CASE { return RegionKR920TxConfig( txConfig, txPower, txTimeOnAir ); } +#define KR920_LINK_ADR_REQ( ) KR920_CASE { return RegionKR920LinkAdrReq( linkAdrReq, drOut, txPowOut, nbRepOut, nbBytesParsed ); } +#define KR920_RX_PARAM_SETUP_REQ( ) KR920_CASE { return RegionKR920RxParamSetupReq( rxParamSetupReq ); } +#define KR920_NEW_CHANNEL_REQ( ) KR920_CASE { return RegionKR920NewChannelReq( newChannelReq ); } +#define KR920_TX_PARAM_SETUP_REQ( ) KR920_CASE { return RegionKR920TxParamSetupReq( txParamSetupReq ); } +#define KR920_DL_CHANNEL_REQ( ) KR920_CASE { return RegionKR920DlChannelReq( dlChannelReq ); } +#define KR920_ALTERNATE_DR( ) KR920_CASE { return RegionKR920AlternateDr( alternateDr ); } +#define KR920_CALC_BACKOFF( ) KR920_CASE { RegionKR920CalcBackOff( calcBackOff ); break; } +#define KR920_NEXT_CHANNEL( ) KR920_CASE { return RegionKR920NextChannel( nextChanParams, channel, time, aggregatedTimeOff ); } +#define KR920_CHANNEL_ADD( ) KR920_CASE { return RegionKR920ChannelAdd( channelAdd ); } +#define KR920_CHANNEL_REMOVE( ) KR920_CASE { return RegionKR920ChannelsRemove( channelRemove ); } +#define KR920_SET_CONTINUOUS_WAVE( ) KR920_CASE { RegionKR920SetContinuousWave( continuousWave ); break; } +#define KR920_APPLY_DR_OFFSET( ) KR920_CASE { return RegionKR920ApplyDrOffset( downlinkDwellTime, dr, drOffset ); } +#else +#define KR920_IS_ACTIVE( ) +#define KR920_GET_PHY_PARAM( ) +#define KR920_SET_BAND_TX_DONE( ) +#define KR920_INIT_DEFAULTS( ) +#define KR920_VERIFY( ) +#define KR920_APPLY_CF_LIST( ) +#define KR920_CHAN_MASK_SET( ) +#define KR920_ADR_NEXT( ) +#define KR920_COMPUTE_RX_WINDOW_PARAMETERS( ) +#define KR920_RX_CONFIG( ) +#define KR920_TX_CONFIG( ) +#define KR920_LINK_ADR_REQ( ) +#define KR920_RX_PARAM_SETUP_REQ( ) +#define KR920_NEW_CHANNEL_REQ( ) +#define KR920_TX_PARAM_SETUP_REQ( ) +#define KR920_DL_CHANNEL_REQ( ) +#define KR920_ALTERNATE_DR( ) +#define KR920_CALC_BACKOFF( ) +#define KR920_NEXT_CHANNEL( ) +#define KR920_CHANNEL_ADD( ) +#define KR920_CHANNEL_REMOVE( ) +#define KR920_SET_CONTINUOUS_WAVE( ) +#define KR920_APPLY_DR_OFFSET( ) +#endif + +#ifdef REGION_IN865 +#include "RegionIN865.h" +#define IN865_CASE case LORAMAC_REGION_IN865: +#define IN865_IS_ACTIVE( ) IN865_CASE { return true; } +#define IN865_GET_PHY_PARAM( ) IN865_CASE { return RegionIN865GetPhyParam( getPhy ); } +#define IN865_SET_BAND_TX_DONE( ) IN865_CASE { RegionIN865SetBandTxDone( txDone ); break; } +#define IN865_INIT_DEFAULTS( ) IN865_CASE { RegionIN865InitDefaults( type ); break; } +#define IN865_VERIFY( ) IN865_CASE { return RegionIN865Verify( verify, phyAttribute ); } +#define IN865_APPLY_CF_LIST( ) IN865_CASE { RegionIN865ApplyCFList( applyCFList ); break; } +#define IN865_CHAN_MASK_SET( ) IN865_CASE { return RegionIN865ChanMaskSet( chanMaskSet ); } +#define IN865_ADR_NEXT( ) IN865_CASE { return RegionIN865AdrNext( adrNext, drOut, txPowOut, adrAckCounter ); } +#define IN865_COMPUTE_RX_WINDOW_PARAMETERS( ) IN865_CASE { RegionIN865ComputeRxWindowParameters( datarate, minRxSymbols, rxError, rxConfigParams ); break; } +#define IN865_RX_CONFIG( ) IN865_CASE { return RegionIN865RxConfig( rxConfig, datarate ); } +#define IN865_TX_CONFIG( ) IN865_CASE { return RegionIN865TxConfig( txConfig, txPower, txTimeOnAir ); } +#define IN865_LINK_ADR_REQ( ) IN865_CASE { return RegionIN865LinkAdrReq( linkAdrReq, drOut, txPowOut, nbRepOut, nbBytesParsed ); } +#define IN865_RX_PARAM_SETUP_REQ( ) IN865_CASE { return RegionIN865RxParamSetupReq( rxParamSetupReq ); } +#define IN865_NEW_CHANNEL_REQ( ) IN865_CASE { return RegionIN865NewChannelReq( newChannelReq ); } +#define IN865_TX_PARAM_SETUP_REQ( ) IN865_CASE { return RegionIN865TxParamSetupReq( txParamSetupReq ); } +#define IN865_DL_CHANNEL_REQ( ) IN865_CASE { return RegionIN865DlChannelReq( dlChannelReq ); } +#define IN865_ALTERNATE_DR( ) IN865_CASE { return RegionIN865AlternateDr( alternateDr ); } +#define IN865_CALC_BACKOFF( ) IN865_CASE { RegionIN865CalcBackOff( calcBackOff ); break; } +#define IN865_NEXT_CHANNEL( ) IN865_CASE { return RegionIN865NextChannel( nextChanParams, channel, time, aggregatedTimeOff ); } +#define IN865_CHANNEL_ADD( ) IN865_CASE { return RegionIN865ChannelAdd( channelAdd ); } +#define IN865_CHANNEL_REMOVE( ) IN865_CASE { return RegionIN865ChannelsRemove( channelRemove ); } +#define IN865_SET_CONTINUOUS_WAVE( ) IN865_CASE { RegionIN865SetContinuousWave( continuousWave ); break; } +#define IN865_APPLY_DR_OFFSET( ) IN865_CASE { return RegionIN865ApplyDrOffset( downlinkDwellTime, dr, drOffset ); } +#else +#define IN865_IS_ACTIVE( ) +#define IN865_GET_PHY_PARAM( ) +#define IN865_SET_BAND_TX_DONE( ) +#define IN865_INIT_DEFAULTS( ) +#define IN865_VERIFY( ) +#define IN865_APPLY_CF_LIST( ) +#define IN865_CHAN_MASK_SET( ) +#define IN865_ADR_NEXT( ) +#define IN865_COMPUTE_RX_WINDOW_PARAMETERS( ) +#define IN865_RX_CONFIG( ) +#define IN865_TX_CONFIG( ) +#define IN865_LINK_ADR_REQ( ) +#define IN865_RX_PARAM_SETUP_REQ( ) +#define IN865_NEW_CHANNEL_REQ( ) +#define IN865_TX_PARAM_SETUP_REQ( ) +#define IN865_DL_CHANNEL_REQ( ) +#define IN865_ALTERNATE_DR( ) +#define IN865_CALC_BACKOFF( ) +#define IN865_NEXT_CHANNEL( ) +#define IN865_CHANNEL_ADD( ) +#define IN865_CHANNEL_REMOVE( ) +#define IN865_SET_CONTINUOUS_WAVE( ) +#define IN865_APPLY_DR_OFFSET( ) +#endif + +#ifdef REGION_US915 +#include "RegionUS915.h" +#define US915_CASE case LORAMAC_REGION_US915: +#define US915_IS_ACTIVE( ) US915_CASE { return true; } +#define US915_GET_PHY_PARAM( ) US915_CASE { return RegionUS915GetPhyParam( getPhy ); } +#define US915_SET_BAND_TX_DONE( ) US915_CASE { RegionUS915SetBandTxDone( txDone ); break; } +#define US915_INIT_DEFAULTS( ) US915_CASE { RegionUS915InitDefaults( type ); break; } +#define US915_VERIFY( ) US915_CASE { return RegionUS915Verify( verify, phyAttribute ); } +#define US915_APPLY_CF_LIST( ) US915_CASE { RegionUS915ApplyCFList( applyCFList ); break; } +#define US915_CHAN_MASK_SET( ) US915_CASE { return RegionUS915ChanMaskSet( chanMaskSet ); } +#define US915_ADR_NEXT( ) US915_CASE { return RegionUS915AdrNext( adrNext, drOut, txPowOut, adrAckCounter ); } +#define US915_COMPUTE_RX_WINDOW_PARAMETERS( ) US915_CASE { RegionUS915ComputeRxWindowParameters( datarate, minRxSymbols, rxError, rxConfigParams ); break; } +#define US915_RX_CONFIG( ) US915_CASE { return RegionUS915RxConfig( rxConfig, datarate ); } +#define US915_TX_CONFIG( ) US915_CASE { return RegionUS915TxConfig( txConfig, txPower, txTimeOnAir ); } +#define US915_LINK_ADR_REQ( ) US915_CASE { return RegionUS915LinkAdrReq( linkAdrReq, drOut, txPowOut, nbRepOut, nbBytesParsed ); } +#define US915_RX_PARAM_SETUP_REQ( ) US915_CASE { return RegionUS915RxParamSetupReq( rxParamSetupReq ); } +#define US915_NEW_CHANNEL_REQ( ) US915_CASE { return RegionUS915NewChannelReq( newChannelReq ); } +#define US915_TX_PARAM_SETUP_REQ( ) US915_CASE { return RegionUS915TxParamSetupReq( txParamSetupReq ); } +#define US915_DL_CHANNEL_REQ( ) US915_CASE { return RegionUS915DlChannelReq( dlChannelReq ); } +#define US915_ALTERNATE_DR( ) US915_CASE { return RegionUS915AlternateDr( alternateDr ); } +#define US915_CALC_BACKOFF( ) US915_CASE { RegionUS915CalcBackOff( calcBackOff ); break; } +#define US915_NEXT_CHANNEL( ) US915_CASE { return RegionUS915NextChannel( nextChanParams, channel, time, aggregatedTimeOff ); } +#define US915_CHANNEL_ADD( ) US915_CASE { return RegionUS915ChannelAdd( channelAdd ); } +#define US915_CHANNEL_REMOVE( ) US915_CASE { return RegionUS915ChannelsRemove( channelRemove ); } +#define US915_SET_CONTINUOUS_WAVE( ) US915_CASE { RegionUS915SetContinuousWave( continuousWave ); break; } +#define US915_APPLY_DR_OFFSET( ) US915_CASE { return RegionUS915ApplyDrOffset( downlinkDwellTime, dr, drOffset ); } +#else +#define US915_IS_ACTIVE( ) +#define US915_GET_PHY_PARAM( ) +#define US915_SET_BAND_TX_DONE( ) +#define US915_INIT_DEFAULTS( ) +#define US915_VERIFY( ) +#define US915_APPLY_CF_LIST( ) +#define US915_CHAN_MASK_SET( ) +#define US915_ADR_NEXT( ) +#define US915_COMPUTE_RX_WINDOW_PARAMETERS( ) +#define US915_RX_CONFIG( ) +#define US915_TX_CONFIG( ) +#define US915_LINK_ADR_REQ( ) +#define US915_RX_PARAM_SETUP_REQ( ) +#define US915_NEW_CHANNEL_REQ( ) +#define US915_TX_PARAM_SETUP_REQ( ) +#define US915_DL_CHANNEL_REQ( ) +#define US915_ALTERNATE_DR( ) +#define US915_CALC_BACKOFF( ) +#define US915_NEXT_CHANNEL( ) +#define US915_CHANNEL_ADD( ) +#define US915_CHANNEL_REMOVE( ) +#define US915_SET_CONTINUOUS_WAVE( ) +#define US915_APPLY_DR_OFFSET( ) +#endif + +#ifdef REGION_US915_HYBRID +#include "RegionUS915-Hybrid.h" +#define US915_HYBRID_CASE case LORAMAC_REGION_US915_HYBRID: +#define US915_HYBRID_IS_ACTIVE( ) US915_HYBRID_CASE { return true; } +#define US915_HYBRID_GET_PHY_PARAM( ) US915_HYBRID_CASE { return RegionUS915HybridGetPhyParam( getPhy ); } +#define US915_HYBRID_SET_BAND_TX_DONE( ) US915_HYBRID_CASE { RegionUS915HybridSetBandTxDone( txDone ); break; } +#define US915_HYBRID_INIT_DEFAULTS( ) US915_HYBRID_CASE { RegionUS915HybridInitDefaults( type ); break; } +#define US915_HYBRID_VERIFY( ) US915_HYBRID_CASE { return RegionUS915HybridVerify( verify, phyAttribute ); } +#define US915_HYBRID_APPLY_CF_LIST( ) US915_HYBRID_CASE { RegionUS915HybridApplyCFList( applyCFList ); break; } +#define US915_HYBRID_CHAN_MASK_SET( ) US915_HYBRID_CASE { return RegionUS915HybridChanMaskSet( chanMaskSet ); } +#define US915_HYBRID_ADR_NEXT( ) US915_HYBRID_CASE { return RegionUS915HybridAdrNext( adrNext, drOut, txPowOut, adrAckCounter ); } +#define US915_HYBRID_COMPUTE_RX_WINDOW_PARAMETERS( ) US915_HYBRID_CASE { RegionUS915HybridComputeRxWindowParameters( datarate, minRxSymbols, rxError, rxConfigParams ); break; } +#define US915_HYBRID_RX_CONFIG( ) US915_HYBRID_CASE { return RegionUS915HybridRxConfig( rxConfig, datarate ); } +#define US915_HYBRID_TX_CONFIG( ) US915_HYBRID_CASE { return RegionUS915HybridTxConfig( txConfig, txPower, txTimeOnAir ); } +#define US915_HYBRID_LINK_ADR_REQ( ) US915_HYBRID_CASE { return RegionUS915HybridLinkAdrReq( linkAdrReq, drOut, txPowOut, nbRepOut, nbBytesParsed ); } +#define US915_HYBRID_RX_PARAM_SETUP_REQ( ) US915_HYBRID_CASE { return RegionUS915HybridRxParamSetupReq( rxParamSetupReq ); } +#define US915_HYBRID_NEW_CHANNEL_REQ( ) US915_HYBRID_CASE { return RegionUS915HybridNewChannelReq( newChannelReq ); } +#define US915_HYBRID_TX_PARAM_SETUP_REQ( ) US915_HYBRID_CASE { return RegionUS915HybridTxParamSetupReq( txParamSetupReq ); } +#define US915_HYBRID_DL_CHANNEL_REQ( ) US915_HYBRID_CASE { return RegionUS915HybridDlChannelReq( dlChannelReq ); } +#define US915_HYBRID_ALTERNATE_DR( ) US915_HYBRID_CASE { return RegionUS915HybridAlternateDr( alternateDr ); } +#define US915_HYBRID_CALC_BACKOFF( ) US915_HYBRID_CASE { RegionUS915HybridCalcBackOff( calcBackOff ); break; } +#define US915_HYBRID_NEXT_CHANNEL( ) US915_HYBRID_CASE { return RegionUS915HybridNextChannel( nextChanParams, channel, time, aggregatedTimeOff ); } +#define US915_HYBRID_CHANNEL_ADD( ) US915_HYBRID_CASE { return RegionUS915HybridChannelAdd( channelAdd ); } +#define US915_HYBRID_CHANNEL_REMOVE( ) US915_HYBRID_CASE { return RegionUS915HybridChannelsRemove( channelRemove ); } +#define US915_HYBRID_SET_CONTINUOUS_WAVE( ) US915_HYBRID_CASE { RegionUS915HybridSetContinuousWave( continuousWave ); break; } +#define US915_HYBRID_APPLY_DR_OFFSET( ) US915_HYBRID_CASE { return RegionUS915HybridApplyDrOffset( downlinkDwellTime, dr, drOffset ); } +#else +#define US915_HYBRID_IS_ACTIVE( ) +#define US915_HYBRID_GET_PHY_PARAM( ) +#define US915_HYBRID_SET_BAND_TX_DONE( ) +#define US915_HYBRID_INIT_DEFAULTS( ) +#define US915_HYBRID_VERIFY( ) +#define US915_HYBRID_APPLY_CF_LIST( ) +#define US915_HYBRID_CHAN_MASK_SET( ) +#define US915_HYBRID_ADR_NEXT( ) +#define US915_HYBRID_COMPUTE_RX_WINDOW_PARAMETERS( ) +#define US915_HYBRID_RX_CONFIG( ) +#define US915_HYBRID_TX_CONFIG( ) +#define US915_HYBRID_LINK_ADR_REQ( ) +#define US915_HYBRID_RX_PARAM_SETUP_REQ( ) +#define US915_HYBRID_NEW_CHANNEL_REQ( ) +#define US915_HYBRID_TX_PARAM_SETUP_REQ( ) +#define US915_HYBRID_DL_CHANNEL_REQ( ) +#define US915_HYBRID_ALTERNATE_DR( ) +#define US915_HYBRID_CALC_BACKOFF( ) +#define US915_HYBRID_NEXT_CHANNEL( ) +#define US915_HYBRID_CHANNEL_ADD( ) +#define US915_HYBRID_CHANNEL_REMOVE( ) +#define US915_HYBRID_SET_CONTINUOUS_WAVE( ) +#define US915_HYBRID_APPLY_DR_OFFSET( ) +#endif + +bool RegionIsActive( LoRaMacRegion_t region ) +{ + switch( region ) + { + AS923_IS_ACTIVE( ); + AU915_IS_ACTIVE( ); + CN470_IS_ACTIVE( ); + CN779_IS_ACTIVE( ); + EU433_IS_ACTIVE( ); + EU868_IS_ACTIVE( ); + KR920_IS_ACTIVE( ); + IN865_IS_ACTIVE( ); + US915_IS_ACTIVE( ); + US915_HYBRID_IS_ACTIVE( ); + default: + { + return false; + } + } +} + +PhyParam_t RegionGetPhyParam( LoRaMacRegion_t region, GetPhyParams_t* getPhy ) +{ + PhyParam_t phyParam = { 0 }; + switch( region ) + { + AS923_GET_PHY_PARAM( ); + AU915_GET_PHY_PARAM( ); + CN470_GET_PHY_PARAM( ); + CN779_GET_PHY_PARAM( ); + EU433_GET_PHY_PARAM( ); + EU868_GET_PHY_PARAM( ); + KR920_GET_PHY_PARAM( ); + IN865_GET_PHY_PARAM( ); + US915_GET_PHY_PARAM( ); + US915_HYBRID_GET_PHY_PARAM( ); + default: + { + return phyParam; + } + } +} + +void RegionSetBandTxDone( LoRaMacRegion_t region, SetBandTxDoneParams_t* txDone ) +{ + switch( region ) + { + AS923_SET_BAND_TX_DONE( ); + AU915_SET_BAND_TX_DONE( ); + CN470_SET_BAND_TX_DONE( ); + CN779_SET_BAND_TX_DONE( ); + EU433_SET_BAND_TX_DONE( ); + EU868_SET_BAND_TX_DONE( ); + KR920_SET_BAND_TX_DONE( ); + IN865_SET_BAND_TX_DONE( ); + US915_SET_BAND_TX_DONE( ); + US915_HYBRID_SET_BAND_TX_DONE( ); + default: + { + return; + } + } +} + +void RegionInitDefaults( LoRaMacRegion_t region, InitType_t type ) +{ + switch( region ) + { + AS923_INIT_DEFAULTS( ); + AU915_INIT_DEFAULTS( ); + CN470_INIT_DEFAULTS( ); + CN779_INIT_DEFAULTS( ); + EU433_INIT_DEFAULTS( ); + EU868_INIT_DEFAULTS( ); + KR920_INIT_DEFAULTS( ); + IN865_INIT_DEFAULTS( ); + US915_INIT_DEFAULTS( ); + US915_HYBRID_INIT_DEFAULTS( ); + default: + { + break; + } + } +} + +bool RegionVerify( LoRaMacRegion_t region, VerifyParams_t* verify, PhyAttribute_t phyAttribute ) +{ + switch( region ) + { + AS923_VERIFY( ); + AU915_VERIFY( ); + CN470_VERIFY( ); + CN779_VERIFY( ); + EU433_VERIFY( ); + EU868_VERIFY( ); + KR920_VERIFY( ); + IN865_VERIFY( ); + US915_VERIFY( ); + US915_HYBRID_VERIFY( ); + default: + { + return false; + } + } +} + +void RegionApplyCFList( LoRaMacRegion_t region, ApplyCFListParams_t* applyCFList ) +{ + switch( region ) + { + AS923_APPLY_CF_LIST( ); + AU915_APPLY_CF_LIST( ); + CN470_APPLY_CF_LIST( ); + CN779_APPLY_CF_LIST( ); + EU433_APPLY_CF_LIST( ); + EU868_APPLY_CF_LIST( ); + KR920_APPLY_CF_LIST( ); + IN865_APPLY_CF_LIST( ); + US915_APPLY_CF_LIST( ); + US915_HYBRID_APPLY_CF_LIST( ); + default: + { + break; + } + } +} + +bool RegionChanMaskSet( LoRaMacRegion_t region, ChanMaskSetParams_t* chanMaskSet ) +{ + switch( region ) + { + AS923_CHAN_MASK_SET( ); + AU915_CHAN_MASK_SET( ); + CN470_CHAN_MASK_SET( ); + CN779_CHAN_MASK_SET( ); + EU433_CHAN_MASK_SET( ); + EU868_CHAN_MASK_SET( ); + KR920_CHAN_MASK_SET( ); + IN865_CHAN_MASK_SET( ); + US915_CHAN_MASK_SET( ); + US915_HYBRID_CHAN_MASK_SET( ); + default: + { + return false; + } + } +} + +bool RegionAdrNext( LoRaMacRegion_t region, AdrNextParams_t* adrNext, int8_t* drOut, int8_t* txPowOut, uint32_t* adrAckCounter ) +{ + switch( region ) + { + AS923_ADR_NEXT( ); + AU915_ADR_NEXT( ); + CN470_ADR_NEXT( ); + CN779_ADR_NEXT( ); + EU433_ADR_NEXT( ); + EU868_ADR_NEXT( ); + KR920_ADR_NEXT( ); + IN865_ADR_NEXT( ); + US915_ADR_NEXT( ); + US915_HYBRID_ADR_NEXT( ); + default: + { + return false; + } + } +} + +void RegionComputeRxWindowParameters( LoRaMacRegion_t region, int8_t datarate, uint8_t minRxSymbols, uint32_t rxError, RxConfigParams_t *rxConfigParams ) +{ + switch( region ) + { + AS923_COMPUTE_RX_WINDOW_PARAMETERS( ); + AU915_COMPUTE_RX_WINDOW_PARAMETERS( ); + CN470_COMPUTE_RX_WINDOW_PARAMETERS( ); + CN779_COMPUTE_RX_WINDOW_PARAMETERS( ); + EU433_COMPUTE_RX_WINDOW_PARAMETERS( ); + EU868_COMPUTE_RX_WINDOW_PARAMETERS( ); + KR920_COMPUTE_RX_WINDOW_PARAMETERS( ); + IN865_COMPUTE_RX_WINDOW_PARAMETERS( ); + US915_COMPUTE_RX_WINDOW_PARAMETERS( ); + US915_HYBRID_COMPUTE_RX_WINDOW_PARAMETERS( ); + default: + { + break; + } + } +} + +bool RegionRxConfig( LoRaMacRegion_t region, RxConfigParams_t* rxConfig, int8_t* datarate ) +{ + switch( region ) + { + AS923_RX_CONFIG( ); + AU915_RX_CONFIG( ); + CN470_RX_CONFIG( ); + CN779_RX_CONFIG( ); + EU433_RX_CONFIG( ); + EU868_RX_CONFIG( ); + KR920_RX_CONFIG( ); + IN865_RX_CONFIG( ); + US915_RX_CONFIG( ); + US915_HYBRID_RX_CONFIG( ); + default: + { + return false; + } + } +} + +bool RegionTxConfig( LoRaMacRegion_t region, TxConfigParams_t* txConfig, int8_t* txPower, TimerTime_t* txTimeOnAir ) +{ + switch( region ) + { + AS923_TX_CONFIG( ); + AU915_TX_CONFIG( ); + CN470_TX_CONFIG( ); + CN779_TX_CONFIG( ); + EU433_TX_CONFIG( ); + EU868_TX_CONFIG( ); + KR920_TX_CONFIG( ); + IN865_TX_CONFIG( ); + US915_TX_CONFIG( ); + US915_HYBRID_TX_CONFIG( ); + default: + { + return false; + } + } +} + +uint8_t RegionLinkAdrReq( LoRaMacRegion_t region, LinkAdrReqParams_t* linkAdrReq, int8_t* drOut, int8_t* txPowOut, uint8_t* nbRepOut, uint8_t* nbBytesParsed ) +{ + switch( region ) + { + AS923_LINK_ADR_REQ( ); + AU915_LINK_ADR_REQ( ); + CN470_LINK_ADR_REQ( ); + CN779_LINK_ADR_REQ( ); + EU433_LINK_ADR_REQ( ); + EU868_LINK_ADR_REQ( ); + KR920_LINK_ADR_REQ( ); + IN865_LINK_ADR_REQ( ); + US915_LINK_ADR_REQ( ); + US915_HYBRID_LINK_ADR_REQ( ); + default: + { + return 0; + } + } +} + +uint8_t RegionRxParamSetupReq( LoRaMacRegion_t region, RxParamSetupReqParams_t* rxParamSetupReq ) +{ + switch( region ) + { + AS923_RX_PARAM_SETUP_REQ( ); + AU915_RX_PARAM_SETUP_REQ( ); + CN470_RX_PARAM_SETUP_REQ( ); + CN779_RX_PARAM_SETUP_REQ( ); + EU433_RX_PARAM_SETUP_REQ( ); + EU868_RX_PARAM_SETUP_REQ( ); + KR920_RX_PARAM_SETUP_REQ( ); + IN865_RX_PARAM_SETUP_REQ( ); + US915_RX_PARAM_SETUP_REQ( ); + US915_HYBRID_RX_PARAM_SETUP_REQ( ); + default: + { + return 0; + } + } +} + +uint8_t RegionNewChannelReq( LoRaMacRegion_t region, NewChannelReqParams_t* newChannelReq ) +{ + switch( region ) + { + AS923_NEW_CHANNEL_REQ( ); + AU915_NEW_CHANNEL_REQ( ); + CN470_NEW_CHANNEL_REQ( ); + CN779_NEW_CHANNEL_REQ( ); + EU433_NEW_CHANNEL_REQ( ); + EU868_NEW_CHANNEL_REQ( ); + KR920_NEW_CHANNEL_REQ( ); + IN865_NEW_CHANNEL_REQ( ); + US915_NEW_CHANNEL_REQ( ); + US915_HYBRID_NEW_CHANNEL_REQ( ); + default: + { + return 0; + } + } +} + +int8_t RegionTxParamSetupReq( LoRaMacRegion_t region, TxParamSetupReqParams_t* txParamSetupReq ) +{ + switch( region ) + { + AS923_TX_PARAM_SETUP_REQ( ); + AU915_TX_PARAM_SETUP_REQ( ); + CN470_TX_PARAM_SETUP_REQ( ); + CN779_TX_PARAM_SETUP_REQ( ); + EU433_TX_PARAM_SETUP_REQ( ); + EU868_TX_PARAM_SETUP_REQ( ); + KR920_TX_PARAM_SETUP_REQ( ); + IN865_TX_PARAM_SETUP_REQ( ); + US915_TX_PARAM_SETUP_REQ( ); + US915_HYBRID_TX_PARAM_SETUP_REQ( ); + default: + { + return 0; + } + } +} + +uint8_t RegionDlChannelReq( LoRaMacRegion_t region, DlChannelReqParams_t* dlChannelReq ) +{ + switch( region ) + { + AS923_DL_CHANNEL_REQ( ); + AU915_DL_CHANNEL_REQ( ); + CN470_DL_CHANNEL_REQ( ); + CN779_DL_CHANNEL_REQ( ); + EU433_DL_CHANNEL_REQ( ); + EU868_DL_CHANNEL_REQ( ); + KR920_DL_CHANNEL_REQ( ); + IN865_DL_CHANNEL_REQ( ); + US915_DL_CHANNEL_REQ( ); + US915_HYBRID_DL_CHANNEL_REQ( ); + default: + { + return 0; + } + } +} + +int8_t RegionAlternateDr( LoRaMacRegion_t region, AlternateDrParams_t* alternateDr ) +{ + switch( region ) + { + AS923_ALTERNATE_DR( ); + AU915_ALTERNATE_DR( ); + CN470_ALTERNATE_DR( ); + CN779_ALTERNATE_DR( ); + EU433_ALTERNATE_DR( ); + EU868_ALTERNATE_DR( ); + KR920_ALTERNATE_DR( ); + IN865_ALTERNATE_DR( ); + US915_ALTERNATE_DR( ); + US915_HYBRID_ALTERNATE_DR( ); + default: + { + return 0; + } + } +} + +void RegionCalcBackOff( LoRaMacRegion_t region, CalcBackOffParams_t* calcBackOff ) +{ + switch( region ) + { + AS923_CALC_BACKOFF( ); + AU915_CALC_BACKOFF( ); + CN470_CALC_BACKOFF( ); + CN779_CALC_BACKOFF( ); + EU433_CALC_BACKOFF( ); + EU868_CALC_BACKOFF( ); + KR920_CALC_BACKOFF( ); + IN865_CALC_BACKOFF( ); + US915_CALC_BACKOFF( ); + US915_HYBRID_CALC_BACKOFF( ); + default: + { + break; + } + } +} + +bool RegionNextChannel( LoRaMacRegion_t region, NextChanParams_t* nextChanParams, uint8_t* channel, TimerTime_t* time, TimerTime_t* aggregatedTimeOff ) +{ + switch( region ) + { + AS923_NEXT_CHANNEL( ); + AU915_NEXT_CHANNEL( ); + CN470_NEXT_CHANNEL( ); + CN779_NEXT_CHANNEL( ); + EU433_NEXT_CHANNEL( ); + EU868_NEXT_CHANNEL( ); + KR920_NEXT_CHANNEL( ); + IN865_NEXT_CHANNEL( ); + US915_NEXT_CHANNEL( ); + US915_HYBRID_NEXT_CHANNEL( ); + default: + { + return false; + } + } +} + +LoRaMacStatus_t RegionChannelAdd( LoRaMacRegion_t region, ChannelAddParams_t* channelAdd ) +{ + switch( region ) + { + AS923_CHANNEL_ADD( ); + AU915_CHANNEL_ADD( ); + CN470_CHANNEL_ADD( ); + CN779_CHANNEL_ADD( ); + EU433_CHANNEL_ADD( ); + EU868_CHANNEL_ADD( ); + KR920_CHANNEL_ADD( ); + IN865_CHANNEL_ADD( ); + US915_CHANNEL_ADD( ); + US915_HYBRID_CHANNEL_ADD( ); + default: + { + return LORAMAC_STATUS_PARAMETER_INVALID; + } + } +} + +bool RegionChannelsRemove( LoRaMacRegion_t region, ChannelRemoveParams_t* channelRemove ) +{ + switch( region ) + { + AS923_CHANNEL_REMOVE( ); + AU915_CHANNEL_REMOVE( ); + CN470_CHANNEL_REMOVE( ); + CN779_CHANNEL_REMOVE( ); + EU433_CHANNEL_REMOVE( ); + EU868_CHANNEL_REMOVE( ); + KR920_CHANNEL_REMOVE( ); + IN865_CHANNEL_REMOVE( ); + US915_CHANNEL_REMOVE( ); + US915_HYBRID_CHANNEL_REMOVE( ); + default: + { + return false; + } + } +} + +void RegionSetContinuousWave( LoRaMacRegion_t region, ContinuousWaveParams_t* continuousWave ) +{ + switch( region ) + { + AS923_SET_CONTINUOUS_WAVE( ); + AU915_SET_CONTINUOUS_WAVE( ); + CN470_SET_CONTINUOUS_WAVE( ); + CN779_SET_CONTINUOUS_WAVE( ); + EU433_SET_CONTINUOUS_WAVE( ); + EU868_SET_CONTINUOUS_WAVE( ); + KR920_SET_CONTINUOUS_WAVE( ); + IN865_SET_CONTINUOUS_WAVE( ); + US915_SET_CONTINUOUS_WAVE( ); + US915_HYBRID_SET_CONTINUOUS_WAVE( ); + default: + { + break; + } + } +} + +uint8_t RegionApplyDrOffset( LoRaMacRegion_t region, uint8_t downlinkDwellTime, int8_t dr, int8_t drOffset ) +{ + switch( region ) + { + AS923_APPLY_DR_OFFSET( ); + AU915_APPLY_DR_OFFSET( ); + CN470_APPLY_DR_OFFSET( ); + CN779_APPLY_DR_OFFSET( ); + EU433_APPLY_DR_OFFSET( ); + EU868_APPLY_DR_OFFSET( ); + KR920_APPLY_DR_OFFSET( ); + IN865_APPLY_DR_OFFSET( ); + US915_APPLY_DR_OFFSET( ); + US915_HYBRID_APPLY_DR_OFFSET( ); + default: + { + return dr; + } + } +} diff --git a/src/mac/region/Region.h b/src/mac/region/Region.h new file mode 100755 index 0000000..6560445 --- /dev/null +++ b/src/mac/region/Region.h @@ -0,0 +1,1492 @@ +/*! + * \file Region.h + * + * \brief Region implementation. + * + * \copyright Revised BSD License, see section \ref LICENSE. + * + * \code + * ______ _ + * / _____) _ | | + * ( (____ _____ ____ _| |_ _____ ____| |__ + * \____ \| ___ | (_ _) ___ |/ ___) _ \ + * _____) ) ____| | | || |_| ____( (___| | | | + * (______/|_____)_|_|_| \__)_____)\____)_| |_| + * (C)2013 Semtech + * + * ___ _____ _ ___ _ _____ ___ ___ ___ ___ + * / __|_ _/_\ / __| |/ / __/ _ \| _ \/ __| __| + * \__ \ | |/ _ \ (__| ' <| _| (_) | / (__| _| + * |___/ |_/_/ \_\___|_|\_\_| \___/|_|_\\___|___| + * embedded.connectivity.solutions=============== + * + * \endcode + * + * \author Miguel Luis ( Semtech ) + * + * \author Gregory Cristian ( Semtech ) + * + * \author Daniel Jaeckle ( STACKFORCE ) + * + * \defgroup REGION Region implementation + * This is the common API to access the specific + * regional implementations. + * + * Preprocessor options: + * - LoRaWAN regions can be activated by defining the related preprocessor + * definition. It is possible to define more than one region. + * The following regions are supported: + * - #define REGION_AS923 + * - #define REGION_AU915 + * - #define REGION_CN470 + * - #define REGION_CN779 + * - #define REGION_EU433 + * - #define REGION_EU868 + * - #define REGION_KR920 + * - #define REGION_IN865 + * - #define REGION_US915 + * - #define REGION_US915_HYBRID + * + * \{ + */ +#ifndef __REGION_H__ +#define __REGION_H__ + + + + +/*! + * Macro to compute bit of a channel index. + */ +#define LC( channelIndex ) ( uint16_t )( 1 << ( channelIndex - 1 ) ) + +/*! + * Region | SF + * ------------ | :-----: + * AS923 | SF12 - BW125 + * AU915 | SF10 - BW125 + * CN470 | SF12 - BW125 + * CN779 | SF12 - BW125 + * EU433 | SF12 - BW125 + * EU868 | SF12 - BW125 + * IN865 | SF12 - BW125 + * KR920 | SF12 - BW125 + * US915 | SF10 - BW125 + * US915_HYBRID | SF10 - BW125 + */ +#define DR_0 0 + +/*! + * Region | SF + * ------------ | :-----: + * AS923 | SF11 - BW125 + * AU915 | SF9 - BW125 + * CN470 | SF11 - BW125 + * CN779 | SF11 - BW125 + * EU433 | SF11 - BW125 + * EU868 | SF11 - BW125 + * IN865 | SF11 - BW125 + * KR920 | SF11 - BW125 + * US915 | SF9 - BW125 + * US915_HYBRID | SF9 - BW125 + */ +#define DR_1 1 + +/*! + * Region | SF + * ------------ | :-----: + * AS923 | SF10 - BW125 + * AU915 | SF8 - BW125 + * CN470 | SF10 - BW125 + * CN779 | SF10 - BW125 + * EU433 | SF10 - BW125 + * EU868 | SF10 - BW125 + * IN865 | SF10 - BW125 + * KR920 | SF10 - BW125 + * US915 | SF8 - BW125 + * US915_HYBRID | SF8 - BW125 + */ +#define DR_2 2 + +/*! + * Region | SF + * ------------ | :-----: + * AS923 | SF9 - BW125 + * AU915 | SF7 - BW125 + * CN470 | SF9 - BW125 + * CN779 | SF9 - BW125 + * EU433 | SF9 - BW125 + * EU868 | SF9 - BW125 + * IN865 | SF9 - BW125 + * KR920 | SF9 - BW125 + * US915 | SF7 - BW125 + * US915_HYBRID | SF7 - BW125 + */ +#define DR_3 3 + +/*! + * Region | SF + * ------------ | :-----: + * AS923 | SF8 - BW125 + * AU915 | SF8 - BW500 + * CN470 | SF8 - BW125 + * CN779 | SF8 - BW125 + * EU433 | SF8 - BW125 + * EU868 | SF8 - BW125 + * IN865 | SF8 - BW125 + * KR920 | SF8 - BW125 + * US915 | SF8 - BW500 + * US915_HYBRID | SF8 - BW500 + */ +#define DR_4 4 + +/*! + * Region | SF + * ------------ | :-----: + * AS923 | SF7 - BW125 + * AU915 | RFU + * CN470 | SF7 - BW125 + * CN779 | SF7 - BW125 + * EU433 | SF7 - BW125 + * EU868 | SF7 - BW125 + * IN865 | SF7 - BW125 + * KR920 | SF7 - BW125 + * US915 | RFU + * US915_HYBRID | RFU + */ +#define DR_5 5 + +/*! + * Region | SF + * ------------ | :-----: + * AS923 | SF7 - BW250 + * AU915 | RFU + * CN470 | SF12 - BW125 + * CN779 | SF7 - BW250 + * EU433 | SF7 - BW250 + * EU868 | SF7 - BW250 + * IN865 | SF7 - BW250 + * KR920 | RFU + * US915 | RFU + * US915_HYBRID | RFU + */ +#define DR_6 6 + +/*! + * Region | SF + * ------------ | :-----: + * AS923 | FSK + * AU915 | RFU + * CN470 | SF12 - BW125 + * CN779 | FSK + * EU433 | FSK + * EU868 | FSK + * IN865 | FSK + * KR920 | RFU + * US915 | RFU + * US915_HYBRID | RFU + */ +#define DR_7 7 + +/*! + * Region | SF + * ------------ | :-----: + * AS923 | RFU + * AU915 | SF12 - BW500 + * CN470 | RFU + * CN779 | RFU + * EU433 | RFU + * EU868 | RFU + * IN865 | RFU + * KR920 | RFU + * US915 | SF12 - BW500 + * US915_HYBRID | SF12 - BW500 + */ +#define DR_8 8 + +/*! + * Region | SF + * ------------ | :-----: + * AS923 | RFU + * AU915 | SF11 - BW500 + * CN470 | RFU + * CN779 | RFU + * EU433 | RFU + * EU868 | RFU + * IN865 | RFU + * KR920 | RFU + * US915 | SF11 - BW500 + * US915_HYBRID | SF11 - BW500 + */ +#define DR_9 9 + +/*! + * Region | SF + * ------------ | :-----: + * AS923 | RFU + * AU915 | SF10 - BW500 + * CN470 | RFU + * CN779 | RFU + * EU433 | RFU + * EU868 | RFU + * IN865 | RFU + * KR920 | RFU + * US915 | SF10 - BW500 + * US915_HYBRID | SF10 - BW500 + */ +#define DR_10 10 + +/*! + * Region | SF + * ------------ | :-----: + * AS923 | RFU + * AU915 | SF9 - BW500 + * CN470 | RFU + * CN779 | RFU + * EU433 | RFU + * EU868 | RFU + * IN865 | RFU + * KR920 | RFU + * US915 | SF9 - BW500 + * US915_HYBRID | SF9 - BW500 + */ +#define DR_11 11 + +/*! + * Region | SF + * ------------ | :-----: + * AS923 | RFU + * AU915 | SF8 - BW500 + * CN470 | RFU + * CN779 | RFU + * EU433 | RFU + * EU868 | RFU + * IN865 | RFU + * KR920 | RFU + * US915 | SF8 - BW500 + * US915_HYBRID | SF8 - BW500 + */ +#define DR_12 12 + +/*! + * Region | SF + * ------------ | :-----: + * AS923 | RFU + * AU915 | SF7 - BW500 + * CN470 | RFU + * CN779 | RFU + * EU433 | RFU + * EU868 | RFU + * IN865 | RFU + * KR920 | RFU + * US915 | SF7 - BW500 + * US915_HYBRID | SF7 - BW500 + */ +#define DR_13 13 + +/*! + * Region | SF + * ------------ | :-----: + * AS923 | RFU + * AU915 | RFU + * CN470 | RFU + * CN779 | RFU + * EU433 | RFU + * EU868 | RFU + * IN865 | RFU + * KR920 | RFU + * US915 | RFU + * US915_HYBRID | RFU + */ +#define DR_14 14 + +/*! + * Region | SF + * ------------ | :-----: + * AS923 | RFU + * AU915 | RFU + * CN470 | RFU + * CN779 | RFU + * EU433 | RFU + * EU868 | RFU + * IN865 | RFU + * KR920 | RFU + * US915 | RFU + * US915_HYBRID | RFU + */ +#define DR_15 15 + + + +/*! + * Region | dBM + * ------------ | :-----: + * AS923 | Max EIRP + * AU915 | Max EIRP + * CN470 | Max EIRP + * CN779 | Max EIRP + * EU433 | Max EIRP + * EU868 | Max EIRP + * IN865 | Max EIRP + * KR920 | Max EIRP + * US915 | Max ERP + * US915_HYBRID | Max ERP + */ +#define TX_POWER_0 0 + +/*! + * Region | dBM + * ------------ | :-----: + * AS923 | Max EIRP - 2 + * AU915 | Max EIRP - 2 + * CN470 | Max EIRP - 2 + * CN779 | Max EIRP - 2 + * EU433 | Max EIRP - 2 + * EU868 | Max EIRP - 2 + * IN865 | Max EIRP - 2 + * KR920 | Max EIRP - 2 + * US915 | Max ERP - 2 + * US915_HYBRID | Max ERP - 2 + */ +#define TX_POWER_1 1 + +/*! + * Region | dBM + * ------------ | :-----: + * AS923 | Max EIRP - 4 + * AU915 | Max EIRP - 4 + * CN470 | Max EIRP - 4 + * CN779 | Max EIRP - 4 + * EU433 | Max EIRP - 4 + * EU868 | Max EIRP - 4 + * IN865 | Max EIRP - 4 + * KR920 | Max EIRP - 4 + * US915 | Max ERP - 4 + * US915_HYBRID | Max ERP - 4 + */ +#define TX_POWER_2 2 + +/*! + * Region | dBM + * ------------ | :-----: + * AS923 | Max EIRP - 6 + * AU915 | Max EIRP - 6 + * CN470 | Max EIRP - 6 + * CN779 | Max EIRP - 6 + * EU433 | Max EIRP - 6 + * EU868 | Max EIRP - 6 + * IN865 | Max EIRP - 6 + * KR920 | Max EIRP - 6 + * US915 | Max ERP - 6 + * US915_HYBRID | Max ERP - 6 + */ +#define TX_POWER_3 3 + +/*! + * Region | dBM + * ------------ | :-----: + * AS923 | Max EIRP - 8 + * AU915 | Max EIRP - 8 + * CN470 | Max EIRP - 8 + * CN779 | Max EIRP - 8 + * EU433 | Max EIRP - 8 + * EU868 | Max EIRP - 8 + * IN865 | Max EIRP - 8 + * KR920 | Max EIRP - 8 + * US915 | Max ERP - 8 + * US915_HYBRID | Max ERP - 8 + */ +#define TX_POWER_4 4 + +/*! + * Region | dBM + * ------------ | :-----: + * AS923 | Max EIRP - 10 + * AU915 | Max EIRP - 10 + * CN470 | Max EIRP - 10 + * CN779 | Max EIRP - 10 + * EU433 | Max EIRP - 10 + * EU868 | Max EIRP - 10 + * IN865 | Max EIRP - 10 + * KR920 | Max EIRP - 10 + * US915 | Max ERP - 10 + * US915_HYBRID | Max ERP - 10 + */ +#define TX_POWER_5 5 + +/*! + * Region | dBM + * ------------ | :-----: + * AS923 | Max EIRP - 12 + * AU915 | Max EIRP - 12 + * CN470 | Max EIRP - 12 + * CN779 | - + * EU433 | - + * EU868 | Max EIRP - 12 + * IN865 | Max EIRP - 12 + * KR920 | Max EIRP - 12 + * US915 | Max ERP - 12 + * US915_HYBRID | Max ERP - 12 + */ +#define TX_POWER_6 6 + +/*! + * Region | dBM + * ------------ | :-----: + * AS923 | Max EIRP - 14 + * AU915 | Max EIRP - 14 + * CN470 | Max EIRP - 14 + * CN779 | - + * EU433 | - + * EU868 | Max EIRP - 14 + * IN865 | Max EIRP - 14 + * KR920 | Max EIRP - 14 + * US915 | Max ERP - 14 + * US915_HYBRID | Max ERP - 14 + */ +#define TX_POWER_7 7 + +/*! + * Region | dBM + * ------------ | :-----: + * AS923 | - + * AU915 | Max EIRP - 16 + * CN470 | - + * CN779 | - + * EU433 | - + * EU868 | - + * IN865 | Max EIRP - 16 + * KR920 | - + * US915 | Max ERP - 16 + * US915_HYBRID | Max ERP -16 + */ +#define TX_POWER_8 8 + +/*! + * Region | dBM + * ------------ | :-----: + * AS923 | - + * AU915 | Max EIRP - 18 + * CN470 | - + * CN779 | - + * EU433 | - + * EU868 | - + * IN865 | Max EIRP - 18 + * KR920 | - + * US915 | Max ERP - 16 + * US915_HYBRID | Max ERP - 16 + */ +#define TX_POWER_9 9 + +/*! + * Region | dBM + * ------------ | :-----: + * AS923 | - + * AU915 | Max EIRP - 20 + * CN470 | - + * CN779 | - + * EU433 | - + * EU868 | - + * IN865 | Max EIRP - 20 + * KR920 | - + * US915 | Max ERP - 10 + * US915_HYBRID | Max ERP - 10 + */ +#define TX_POWER_10 10 + +/*! + * RFU + */ +#define TX_POWER_11 11 + +/*! + * RFU + */ +#define TX_POWER_12 12 + +/*! + * RFU + */ +#define TX_POWER_13 13 + +/*! + * RFU + */ +#define TX_POWER_14 14 + +/*! + * RFU + */ +#define TX_POWER_15 15 + + + +/*! + * Enumeration of phy attributes. + */ +typedef enum ePhyAttribute +{ + /*! + * Minimum RX datarate. + */ + PHY_MIN_RX_DR, + /*! + * Minimum TX datarate. + */ + PHY_MIN_TX_DR, + /*! + * Maximum RX datarate. + */ + PHY_MAX_RX_DR, + /*! + * Maximum TX datarate. + */ + PHY_MAX_TX_DR, + /*! + * TX datarate. + */ + PHY_TX_DR, + /*! + * Default TX datarate. + */ + PHY_DEF_TX_DR, + /*! + * RX datarate. + */ + PHY_RX_DR, + /*! + * TX power. + */ + PHY_TX_POWER, + /*! + * Default TX power. + */ + PHY_DEF_TX_POWER, + /*! + * Maximum payload possible. + */ + PHY_MAX_PAYLOAD, + /*! + * Maximum payload possible when repeater support is enabled. + */ + PHY_MAX_PAYLOAD_REPEATER, + /*! + * Duty cycle. + */ + PHY_DUTY_CYCLE, + /*! + * Maximum receive window duration. + */ + PHY_MAX_RX_WINDOW, + /*! + * Receive delay for window 1. + */ + PHY_RECEIVE_DELAY1, + /*! + * Receive delay for window 2. + */ + PHY_RECEIVE_DELAY2, + /*! + * Join accept delay for window 1. + */ + PHY_JOIN_ACCEPT_DELAY1, + /*! + * Join accept delay for window 2. + */ + PHY_JOIN_ACCEPT_DELAY2, + /*! + * Maximum frame counter gap. + */ + PHY_MAX_FCNT_GAP, + /*! + * Acknowledgement time out. + */ + PHY_ACK_TIMEOUT, + /*! + * Default datarate offset for window 1. + */ + PHY_DEF_DR1_OFFSET, + /*! + * Default receive window 2 frequency. + */ + PHY_DEF_RX2_FREQUENCY, + /*! + * Default receive window 2 datarate. + */ + PHY_DEF_RX2_DR, + /*! + * Channels mask. + */ + PHY_CHANNELS_MASK, + /*! + * Channels default mask. + */ + PHY_CHANNELS_DEFAULT_MASK, + /*! + * Maximum number of supported channels + */ + PHY_MAX_NB_CHANNELS, + /*! + * Channels. + */ + PHY_CHANNELS, + /*! + * Default value of the uplink dwell time. + */ + PHY_DEF_UPLINK_DWELL_TIME, + /*! + * Default value of the downlink dwell time. + */ + PHY_DEF_DOWNLINK_DWELL_TIME, + /*! + * Default value of the MaxEIRP. + */ + PHY_DEF_MAX_EIRP, + /*! + * Default value of the antenna gain. + */ + PHY_DEF_ANTENNA_GAIN, + /*! + * Value for the number of join trials. + */ + PHY_NB_JOIN_TRIALS, + /*! + * Default value for the number of join trials. + */ + PHY_DEF_NB_JOIN_TRIALS, + /*! + * Next lower datarate. + */ + PHY_NEXT_LOWER_TX_DR +}PhyAttribute_t; + +/*! + * Enumeration of initialization types. + */ +typedef enum eInitType +{ + /*! + * Performs an initialization and overwrites all existing data. + */ + INIT_TYPE_INIT, + /*! + * Restores default channels only. + */ + INIT_TYPE_RESTORE +}InitType_t; + +typedef enum eChannelsMask +{ + /*! + * The channels mask. + */ + CHANNELS_MASK, + /*! + * The channels default mask. + */ + CHANNELS_DEFAULT_MASK +}ChannelsMask_t; + +/*! + * Union for the structure uGetPhyParams + */ +typedef union uPhyParam +{ + /*! + * A parameter value. + */ + uint32_t Value; + /*! + * A floating point value. + */ + float fValue; + /*! + * Pointer to the channels mask. + */ + uint16_t* ChannelsMask; + /*! + * Pointer to the channels. + */ + ChannelParams_t* Channels; +}PhyParam_t; + +/*! + * Parameter structure for the function RegionGetPhyParam. + */ +typedef struct sGetPhyParams +{ + /*! + * Setup the parameter to get. + */ + PhyAttribute_t Attribute; + /*! + * Datarate. + * The parameter is needed for the following queries: + * PHY_MAX_PAYLOAD, PHY_MAX_PAYLOAD_REPEATER, PHY_NEXT_LOWER_TX_DR. + */ + int8_t Datarate; + /*! + * Uplink dwell time. + * The parameter is needed for the following queries: + * PHY_MIN_TX_DR, PHY_MAX_PAYLOAD, PHY_MAX_PAYLOAD_REPEATER, PHY_NEXT_LOWER_TX_DR. + */ + uint8_t UplinkDwellTime; + /*! + * Downlink dwell time. + * The parameter is needed for the following queries: + * PHY_MIN_RX_DR, PHY_MAX_PAYLOAD, PHY_MAX_PAYLOAD_REPEATER. + */ + uint8_t DownlinkDwellTime; +}GetPhyParams_t; + +/*! + * Parameter structure for the function RegionSetBandTxDone. + */ +typedef struct sSetBandTxDoneParams +{ + /*! + * Channel to update. + */ + uint8_t Channel; + /*! + * Joined Set to true, if the node has joined the network + */ + bool Joined; + /*! + * Last TX done time. + */ + TimerTime_t LastTxDoneTime; +}SetBandTxDoneParams_t; + +/*! + * Parameter structure for the function RegionVerify. + */ +typedef union uVerifyParams +{ + /*! + * TX power to verify. + */ + int8_t TxPower; + /*! + * Set to true, if the duty cycle is enabled, otherwise false. + */ + bool DutyCycle; + /*! + * The number of join trials. + */ + uint8_t NbJoinTrials; + /*! + * Datarate to verify. + */ + struct sDatarateParams + { + /*! + * Datarate to verify. + */ + int8_t Datarate; + /*! + * The downlink dwell time. + */ + uint8_t DownlinkDwellTime; + /*! + * The up link dwell time. + */ + uint8_t UplinkDwellTime; + }DatarateParams; +}VerifyParams_t; + +/*! + * Parameter structure for the function RegionApplyCFList. + */ +typedef struct sApplyCFListParams +{ + /*! + * Payload which contains the CF list. + */ + uint8_t* Payload; + /*! + * Size of the payload. + */ + uint8_t Size; +}ApplyCFListParams_t; + +/*! + * Parameter structure for the function RegionChanMaskSet. + */ +typedef struct sChanMaskSetParams +{ + /*! + * Pointer to the channels mask which should be set. + */ + uint16_t* ChannelsMaskIn; + /*! + * Pointer to the channels mask which should be set. + */ + ChannelsMask_t ChannelsMaskType; +}ChanMaskSetParams_t; + +/*! + * Parameter structure for the function RegionAdrNext. + */ +typedef struct sAdrNextParams +{ + /*! + * Set to true, if the function should update the channels mask. + */ + bool UpdateChanMask; + /*! + * Set to true, if ADR is enabled. + */ + bool AdrEnabled; + /*! + * ADR ack counter. + */ + uint32_t AdrAckCounter; + /*! + * Datarate used currently. + */ + int8_t Datarate; + /*! + * TX power used currently. + */ + int8_t TxPower; + /*! + * UplinkDwellTime + */ + uint8_t UplinkDwellTime; +}AdrNextParams_t; + +/*! + * Parameter structure for the function RegionRxConfig. + */ +typedef struct sRxConfigParams +{ + /*! + * The RX channel. + */ + uint8_t Channel; + /*! + * RX datarate. + */ + int8_t Datarate; + /*! + * RX bandwidth. + */ + uint8_t Bandwidth; + /*! + * RX datarate offset. + */ + int8_t DrOffset; + /*! + * RX frequency. + */ + uint32_t Frequency; + /*! + * RX window timeout + */ + uint32_t WindowTimeout; + /*! + * RX window offset + */ + int32_t WindowOffset; + /*! + * Downlink dwell time. + */ + uint8_t DownlinkDwellTime; + /*! + * Set to true, if a repeater is supported. + */ + bool RepeaterSupport; + /*! + * Set to true, if RX should be continuous. + */ + bool RxContinuous; + /*! + * Sets the RX window. 0: RX window 1, 1: RX window 2. + */ + bool Window; +}RxConfigParams_t; + +/*! + * Parameter structure for the function RegionTxConfig. + */ +typedef struct sTxConfigParams +{ + /*! + * The TX channel. + */ + uint8_t Channel; + /*! + * The TX datarate. + */ + int8_t Datarate; + /*! + * The TX power. + */ + int8_t TxPower; + /*! + * The Max EIRP, if applicable. + */ + float MaxEirp; + /*! + * The antenna gain, if applicable. + */ + float AntennaGain; + /*! + * Frame length to setup. + */ + uint16_t PktLen; +}TxConfigParams_t; + +/*! + * Parameter structure for the function RegionLinkAdrReq. + */ +typedef struct sLinkAdrReqParams +{ + /*! + * Pointer to the payload which contains the MAC commands. + */ + uint8_t* Payload; + /*! + * Size of the payload. + */ + uint8_t PayloadSize; + /*! + * Uplink dwell time. + */ + uint8_t UplinkDwellTime; + /*! + * Set to true, if ADR is enabled. + */ + bool AdrEnabled; + /*! + * The current datarate. + */ + int8_t CurrentDatarate; + /*! + * The current TX power. + */ + int8_t CurrentTxPower; + /*! + * The current number of repetitions. + */ + uint8_t CurrentNbRep; +}LinkAdrReqParams_t; + +/*! + * Parameter structure for the function RegionRxParamSetupReq. + */ +typedef struct sRxParamSetupReqParams +{ + /*! + * The datarate to setup. + */ + int8_t Datarate; + /*! + * Datarate offset. + */ + int8_t DrOffset; + /*! + * The frequency to setup. + */ + uint32_t Frequency; +}RxParamSetupReqParams_t; + +/*! + * Parameter structure for the function RegionNewChannelReq. + */ +typedef struct sNewChannelReqParams +{ + /*! + * Pointer to the new channels. + */ + ChannelParams_t* NewChannel; + /*! + * Channel id. + */ + int8_t ChannelId; +}NewChannelReqParams_t; + +/*! + * Parameter structure for the function RegionTxParamSetupReq. + */ +typedef struct sTxParamSetupReqParams +{ + /*! + * Uplink dwell time. + */ + uint8_t UplinkDwellTime; + /*! + * Downlink dwell time. + */ + uint8_t DownlinkDwellTime; + /*! + * Max EIRP. + */ + uint8_t MaxEirp; +}TxParamSetupReqParams_t; + +/*! + * Parameter structure for the function RegionDlChannelReq. + */ +typedef struct sDlChannelReqParams +{ + /*! + * Channel Id to add the frequency. + */ + uint8_t ChannelId; + /*! + * Alternative frequency for the Rx1 window. + */ + uint32_t Rx1Frequency; +}DlChannelReqParams_t; + +/*! + * Parameter structure for the function RegionAlternateDr. + */ +typedef struct sAlternateDrParams +{ + /*! + * Number of trials. + */ + uint16_t NbTrials; +}AlternateDrParams_t; + +/*! + * Parameter structure for the function RegionCalcBackOff. + */ +typedef struct sCalcBackOffParams +{ + /*! + * Set to true, if the node has already joined a network, otherwise false. + */ + bool Joined; + /*! + * Joined Set to true, if the last uplink was a join request + */ + bool LastTxIsJoinRequest; + /*! + * Set to true, if the duty cycle is enabled, otherwise false. + */ + bool DutyCycleEnabled; + /*! + * Current channel index. + */ + uint8_t Channel; + /*! + * Elapsed time since the start of the node. + */ + TimerTime_t ElapsedTime; + /*! + * Time-on-air of the last transmission. + */ + TimerTime_t TxTimeOnAir; +}CalcBackOffParams_t; + +/*! + * Parameter structure for the function RegionNextChannel. + */ +typedef struct sNextChanParams +{ + /*! + * Aggregated time-off time. + */ + TimerTime_t AggrTimeOff; + /*! + * Time of the last aggregated TX. + */ + TimerTime_t LastAggrTx; + /*! + * Current datarate. + */ + int8_t Datarate; + /*! + * Set to true, if the node has already joined a network, otherwise false. + */ + bool Joined; + /*! + * Set to true, if the duty cycle is enabled, otherwise false. + */ + bool DutyCycleEnabled; +}NextChanParams_t; + +/*! + * Parameter structure for the function RegionChannelsAdd. + */ +typedef struct sChannelAddParams +{ + /*! + * Pointer to the new channel to add. + */ + ChannelParams_t* NewChannel; + /*! + * Channel id to add. + */ + uint8_t ChannelId; +}ChannelAddParams_t; + +/*! + * Parameter structure for the function RegionChannelsRemove. + */ +typedef struct sChannelRemoveParams +{ + /*! + * Channel id to remove. + */ + uint8_t ChannelId; +}ChannelRemoveParams_t; + +/*! + * Parameter structure for the function RegionContinuousWave. + */ +typedef struct sContinuousWaveParams +{ + /*! + * Current channel index. + */ + uint8_t Channel; + /*! + * Datarate. Used to limit the TX power. + */ + int8_t Datarate; + /*! + * The TX power to setup. + */ + int8_t TxPower; + /*! + * Max EIRP, if applicable. + */ + float MaxEirp; + /*! + * The antenna gain, if applicable. + */ + float AntennaGain; + /*! + * Specifies the time the radio will stay in CW mode. + */ + uint16_t Timeout; +}ContinuousWaveParams_t; + + + +/*! + * \brief The function verifies if a region is active or not. If a region + * is not active, it cannot be used. + * + * \param [IN] region LoRaWAN region. + * + * \retval Return true, if the region is supported. + */ +bool RegionIsActive( LoRaMacRegion_t region ); + +/*! + * \brief The function gets a value of a specific phy attribute. + * + * \param [IN] region LoRaWAN region. + * + * \param [IN] getPhy Pointer to the function parameters. + * + * \retval Returns a structure containing the PHY parameter. + */ +PhyParam_t RegionGetPhyParam( LoRaMacRegion_t region, GetPhyParams_t* getPhy ); + +/*! + * \brief Updates the last TX done parameters of the current channel. + * + * \param [IN] region LoRaWAN region. + * + * \param [IN] txDone Pointer to the function parameters. + */ +void RegionSetBandTxDone( LoRaMacRegion_t region, SetBandTxDoneParams_t* txDone ); + +/*! + * \brief Initializes the channels masks and the channels. + * + * \param [IN] region LoRaWAN region. + * + * \param [IN] type Sets the initialization type. + */ +void RegionInitDefaults( LoRaMacRegion_t region, InitType_t type ); + +/*! + * \brief Verifies a parameter. + * + * \param [IN] region LoRaWAN region. + * + * \param [IN] verify Pointer to the function parameters. + * + * \param [IN] type Sets the initialization type. + * + * \retval Returns true, if the parameter is valid. + */ +bool RegionVerify( LoRaMacRegion_t region, VerifyParams_t* verify, PhyAttribute_t phyAttribute ); + +/*! + * \brief The function parses the input buffer and sets up the channels of the + * CF list. + * + * \param [IN] region LoRaWAN region. + * + * \param [IN] applyCFList Pointer to the function parameters. + */ +void RegionApplyCFList( LoRaMacRegion_t region, ApplyCFListParams_t* applyCFList ); + +/*! + * \brief Sets a channels mask. + * + * \param [IN] region LoRaWAN region. + * + * \param [IN] chanMaskSet Pointer to the function parameters. + * + * \retval Returns true, if the channels mask could be set. + */ +bool RegionChanMaskSet( LoRaMacRegion_t region, ChanMaskSetParams_t* chanMaskSet ); + +/*! + * \brief Calculates the next datarate to set, when ADR is on or off. + * + * \param [IN] region LoRaWAN region. + * + * \param [IN] adrNext Pointer to the function parameters. + * + * \param [OUT] drOut The calculated datarate for the next TX. + * + * \param [OUT] txPowOut The TX power for the next TX. + * + * \param [OUT] adrAckCounter The calculated ADR acknowledgement counter. + * + * \retval Returns true, if an ADR request should be performed. + */ +bool RegionAdrNext( LoRaMacRegion_t region, AdrNextParams_t* adrNext, int8_t* drOut, int8_t* txPowOut, uint32_t* adrAckCounter ); + +/*! + * \brief Configuration of the RX windows. + * + * \param [IN] region LoRaWAN region. + * + * \param [IN] rxConfig Pointer to the function parameters. + * + * \param [OUT] datarate The datarate index which was set. + * + * \retval Returns true, if the configuration was applied successfully. + */ +bool RegionRxConfig( LoRaMacRegion_t region, RxConfigParams_t* rxConfig, int8_t* datarate ); + +/* + * Rx window precise timing + * + * For more details please consult the following document, chapter 3.1.2. + * http://www.semtech.com/images/datasheet/SX1272_settings_for_LoRaWAN_v2.0.pdf + * or + * http://www.semtech.com/images/datasheet/SX1276_settings_for_LoRaWAN_v2.0.pdf + * + * Downlink start: T = Tx + 1s (+/- 20 us) + * | + * TRxEarly | TRxLate + * | | | + * | | +---+---+---+---+---+---+---+---+ + * | | | Latest Rx window | + * | | +---+---+---+---+---+---+---+---+ + * | | | + * +---+---+---+---+---+---+---+---+ + * | Earliest Rx window | + * +---+---+---+---+---+---+---+---+ + * | + * +---+---+---+---+---+---+---+---+ + *Downlink preamble 8 symbols | | | | | | | | | + * +---+---+---+---+---+---+---+---+ + * + * Worst case Rx window timings + * + * TRxLate = DEFAULT_MIN_RX_SYMBOLS * tSymbol - RADIO_WAKEUP_TIME + * TRxEarly = 8 - DEFAULT_MIN_RX_SYMBOLS * tSymbol - RxWindowTimeout - RADIO_WAKEUP_TIME + * + * TRxLate - TRxEarly = 2 * DEFAULT_SYSTEM_MAX_RX_ERROR + * + * RxOffset = ( TRxLate + TRxEarly ) / 2 + * + * RxWindowTimeout = ( 2 * DEFAULT_MIN_RX_SYMBOLS - 8 ) * tSymbol + 2 * DEFAULT_SYSTEM_MAX_RX_ERROR + * RxOffset = 4 * tSymbol - RxWindowTimeout / 2 - RADIO_WAKE_UP_TIME + * + * Minimal value of RxWindowTimeout must be 5 symbols which implies that the system always tolerates at least an error of 1.5 * tSymbol + */ +/*! + * Computes the Rx window timeout and offset. + * + * \param [IN] region LoRaWAN region. + * + * \param [IN] datarate Rx window datarate index to be used + * + * \param [IN] minRxSymbols Minimum required number of symbols to detect an Rx frame. + * + * \param [IN] rxError System maximum timing error of the receiver. In milliseconds + * The receiver will turn on in a [-rxError : +rxError] ms + * interval around RxOffset + * + * \param [OUT]rxConfigParams Returns updated WindowTimeout and WindowOffset fields. + */ +void RegionComputeRxWindowParameters( LoRaMacRegion_t region, int8_t datarate, uint8_t minRxSymbols, uint32_t rxError, RxConfigParams_t *rxConfigParams ); + +/*! + * \brief TX configuration. + * + * \param [IN] region LoRaWAN region. + * + * \param [IN] txConfig Pointer to the function parameters. + * + * \param [OUT] txPower The tx power index which was set. + * + * \param [OUT] txTimeOnAir The time-on-air of the frame. + * + * \retval Returns true, if the configuration was applied successfully. + */ +bool RegionTxConfig( LoRaMacRegion_t region, TxConfigParams_t* txConfig, int8_t* txPower, TimerTime_t* txTimeOnAir ); + +/*! + * \brief The function processes a Link ADR Request. + * + * \param [IN] region LoRaWAN region. + * + * \param [IN] linkAdrReq Pointer to the function parameters. + * + * \param [OUT] drOut The datarate which was applied. + * + * \param [OUT] txPowOut The TX power which was applied. + * + * \param [OUT] nbRepOut The number of repetitions to apply. + * + * \param [OUT] nbBytesParsed The number bytes which were parsed. + * + * \retval Returns the status of the operation, according to the LoRaMAC specification. + */ +uint8_t RegionLinkAdrReq( LoRaMacRegion_t region, LinkAdrReqParams_t* linkAdrReq, int8_t* drOut, int8_t* txPowOut, uint8_t* nbRepOut, uint8_t* nbBytesParsed ); + +/*! + * \brief The function processes a RX Parameter Setup Request. + * + * \param [IN] region LoRaWAN region. + * + * \param [IN] rxParamSetupReq Pointer to the function parameters. + * + * \retval Returns the status of the operation, according to the LoRaMAC specification. + */ +uint8_t RegionRxParamSetupReq( LoRaMacRegion_t region, RxParamSetupReqParams_t* rxParamSetupReq ); + +/*! + * \brief The function processes a New Channel Request. + * + * \param [IN] region LoRaWAN region. + * + * \param [IN] newChannelReq Pointer to the function parameters. + * + * \retval Returns the status of the operation, according to the LoRaMAC specification. + */ +uint8_t RegionNewChannelReq( LoRaMacRegion_t region, NewChannelReqParams_t* newChannelReq ); + +/*! + * \brief The function processes a TX ParamSetup Request. + * + * \param [IN] region LoRaWAN region. + * + * \param [IN] txParamSetupReq Pointer to the function parameters. + * + * \retval Returns the status of the operation, according to the LoRaMAC specification. + * Returns -1, if the functionality is not implemented. In this case, the end node + * shall ignore the command. + */ +int8_t RegionTxParamSetupReq( LoRaMacRegion_t region, TxParamSetupReqParams_t* txParamSetupReq ); + +/*! + * \brief The function processes a DlChannel Request. + * + * \param [IN] region LoRaWAN region. + * + * \param [IN] dlChannelReq Pointer to the function parameters. + * + * \retval Returns the status of the operation, according to the LoRaMAC specification. + */ +uint8_t RegionDlChannelReq( LoRaMacRegion_t region, DlChannelReqParams_t* dlChannelReq ); + +/*! + * \brief Alternates the datarate of the channel for the join request. + * + * \param [IN] region LoRaWAN region. + * + * \param [IN] alternateDr Pointer to the function parameters. + * + * \retval Datarate to apply. + */ +int8_t RegionAlternateDr( LoRaMacRegion_t region, AlternateDrParams_t* alternateDr ); + +/*! + * \brief Calculates the back-off time. + * + * \param [IN] region LoRaWAN region. + * + * \param [IN] calcBackOff Pointer to the function parameters. + */ +void RegionCalcBackOff( LoRaMacRegion_t region, CalcBackOffParams_t* calcBackOff ); + +/*! + * \brief Searches and set the next random available channel + * + * \param [IN] region LoRaWAN region. + * + * \param [OUT] channel Next channel to use for TX. + * + * \param [OUT] time Time to wait for the next transmission according to the duty + * cycle. + * + * \param [OUT] aggregatedTimeOff Updates the aggregated time off. + * + * \retval Function status [1: OK, 0: Unable to find a channel on the current datarate]. + */ +bool RegionNextChannel( LoRaMacRegion_t region, NextChanParams_t* nextChanParams, uint8_t* channel, TimerTime_t* time, TimerTime_t* aggregatedTimeOff ); + +/*! + * \brief Adds a channel. + * + * \param [IN] region LoRaWAN region. + * + * \param [IN] channelAdd Pointer to the function parameters. + * + * \retval Status of the operation. + */ +LoRaMacStatus_t RegionChannelAdd( LoRaMacRegion_t region, ChannelAddParams_t* channelAdd ); + +/*! + * \brief Removes a channel. + * + * \param [IN] region LoRaWAN region. + * + * \param [IN] channelRemove Pointer to the function parameters. + * + * \retval Returns true, if the channel was removed successfully. + */ +bool RegionChannelsRemove( LoRaMacRegion_t region, ChannelRemoveParams_t* channelRemove ); + +/*! + * \brief Sets the radio into continuous wave mode. + * + * \param [IN] region LoRaWAN region. + * + * \param [IN] continuousWave Pointer to the function parameters. + */ +void RegionSetContinuousWave( LoRaMacRegion_t region, ContinuousWaveParams_t* continuousWave ); + +/*! + * \brief Computes new datarate according to the given offset + * + * \param [IN] downlinkDwellTime Downlink dwell time configuration. 0: No limit, 1: 400ms + * + * \param [IN] dr Current datarate + * + * \param [IN] drOffset Offset to be applied + * + * \retval newDr Computed datarate. + */ +uint8_t RegionApplyDrOffset( LoRaMacRegion_t region, uint8_t downlinkDwellTime, int8_t dr, int8_t drOffset ); + +/*! \} defgroup REGION */ + +#endif // __REGION_H__ diff --git a/src/mac/region/RegionAS923.c b/src/mac/region/RegionAS923.c new file mode 100755 index 0000000..ecaaf66 --- /dev/null +++ b/src/mac/region/RegionAS923.c @@ -0,0 +1,1102 @@ +/* + / _____) _ | | +( (____ _____ ____ _| |_ _____ ____| |__ + \____ \| ___ | (_ _) ___ |/ ___) _ \ + _____) ) ____| | | || |_| ____( (___| | | | +(______/|_____)_|_|_| \__)_____)\____)_| |_| + (C)2013 Semtech + ___ _____ _ ___ _ _____ ___ ___ ___ ___ +/ __|_ _/_\ / __| |/ / __/ _ \| _ \/ __| __| +\__ \ | |/ _ \ (__| ' <| _| (_) | / (__| _| +|___/ |_/_/ \_\___|_|\_\_| \___/|_|_\\___|___| +embedded.connectivity.solutions=============== + +Description: LoRa MAC region AS923 implementation + +License: Revised BSD License, see LICENSE.TXT file include in the project + +Maintainer: Miguel Luis ( Semtech ), Gregory Cristian ( Semtech ) and Daniel Jaeckle ( STACKFORCE ) +*/ +#include +#include +#include +#include + +#include "board.h" +#include "LoRaMac.h" + +#include "utilities.h" + +#include "Region.h" +#include "RegionCommon.h" +#include "RegionAS923.h" + +// Definitions +#define CHANNELS_MASK_SIZE 1 + +// Global attributes +/*! + * LoRaMAC channels + */ +static ChannelParams_t Channels[AS923_MAX_NB_CHANNELS]; + +/*! + * LoRaMac bands + */ +static Band_t Bands[AS923_MAX_NB_BANDS] = +{ + AS923_BAND0 +}; + +/*! + * LoRaMac channels mask + */ +static uint16_t ChannelsMask[CHANNELS_MASK_SIZE]; + +/*! + * LoRaMac channels default mask + */ +static uint16_t ChannelsDefaultMask[CHANNELS_MASK_SIZE]; + +// Static functions +static int8_t GetNextLowerTxDr( int8_t dr, int8_t minDr ) +{ + uint8_t nextLowerDr = 0; + + if( dr == minDr ) + { + nextLowerDr = minDr; + } + else + { + nextLowerDr = dr - 1; + } + return nextLowerDr; +} + +static uint32_t GetBandwidth( uint32_t drIndex ) +{ + switch( BandwidthsAS923[drIndex] ) + { + default: + case 125000: + return 0; + case 250000: + return 1; + case 500000: + return 2; + } +} + +static int8_t LimitTxPower( int8_t txPower, int8_t maxBandTxPower, int8_t datarate, uint16_t* channelsMask ) +{ + int8_t txPowerResult = txPower; + + // Limit tx power to the band max + txPowerResult = MAX( txPower, maxBandTxPower ); + + return txPowerResult; +} + +static bool VerifyTxFreq( uint32_t freq ) +{ + // Check radio driver support + if( Radio.CheckRfFrequency( freq ) == false ) + { + return false; + } + + if( ( freq < 915000000 ) || ( freq > 928000000 ) ) + { + return false; + } + return true; +} + +static uint8_t CountNbOfEnabledChannels( bool joined, uint8_t datarate, uint16_t* channelsMask, ChannelParams_t* channels, Band_t* bands, uint8_t* enabledChannels, uint8_t* delayTx ) +{ + uint8_t nbEnabledChannels = 0; + uint8_t delayTransmission = 0; + + for( uint8_t i = 0, k = 0; i < AS923_MAX_NB_CHANNELS; i += 16, k++ ) + { + for( uint8_t j = 0; j < 16; j++ ) + { + if( ( channelsMask[k] & ( 1 << j ) ) != 0 ) + { + if( channels[i + j].Frequency == 0 ) + { // Check if the channel is enabled + continue; + } + if( joined == false ) + { + if( ( AS923_JOIN_CHANNELS & ( 1 << j ) ) == 0 ) + { + continue; + } + } + if( RegionCommonValueInRange( datarate, channels[i + j].DrRange.Fields.Min, + channels[i + j].DrRange.Fields.Max ) == false ) + { // Check if the current channel selection supports the given datarate + continue; + } + if( bands[channels[i + j].Band].TimeOff > 0 ) + { // Check if the band is available for transmission + delayTransmission++; + continue; + } + enabledChannels[nbEnabledChannels++] = i + j; + } + } + } + + *delayTx = delayTransmission; + return nbEnabledChannels; +} + +PhyParam_t RegionAS923GetPhyParam( GetPhyParams_t* getPhy ) +{ + PhyParam_t phyParam = { 0 }; + + switch( getPhy->Attribute ) + { + case PHY_MIN_RX_DR: + { + if( getPhy->DownlinkDwellTime == 0 ) + { + phyParam.Value = AS923_RX_MIN_DATARATE; + } + else + { + phyParam.Value = AS923_DWELL_LIMIT_DATARATE; + } + break; + } + case PHY_MIN_TX_DR: + { + if( getPhy->UplinkDwellTime == 0 ) + { + phyParam.Value = AS923_TX_MIN_DATARATE; + } + else + { + phyParam.Value = AS923_DWELL_LIMIT_DATARATE; + } + break; + } + case PHY_DEF_TX_DR: + { + phyParam.Value = AS923_DEFAULT_DATARATE; + break; + } + case PHY_NEXT_LOWER_TX_DR: + { + if( getPhy->UplinkDwellTime == 0 ) + { + phyParam.Value = GetNextLowerTxDr( getPhy->Datarate, AS923_TX_MIN_DATARATE ); + } + else + { + phyParam.Value = GetNextLowerTxDr( getPhy->Datarate, AS923_DWELL_LIMIT_DATARATE ); + } + break; + } + case PHY_DEF_TX_POWER: + { + phyParam.Value = AS923_DEFAULT_TX_POWER; + break; + } + case PHY_MAX_PAYLOAD: + { + if( getPhy->UplinkDwellTime == 0 ) + { + phyParam.Value = MaxPayloadOfDatarateDwell0AS923[getPhy->Datarate]; + } + else + { + phyParam.Value = MaxPayloadOfDatarateDwell1UpAS923[getPhy->Datarate]; + } + break; + } + case PHY_MAX_PAYLOAD_REPEATER: + { + if( getPhy->UplinkDwellTime == 0 ) + { + phyParam.Value = MaxPayloadOfDatarateRepeaterDwell0AS923[getPhy->Datarate]; + } + else + { + phyParam.Value = MaxPayloadOfDatarateDwell1UpAS923[getPhy->Datarate]; + } + break; + } + case PHY_DUTY_CYCLE: + { + phyParam.Value = AS923_DUTY_CYCLE_ENABLED; + break; + } + case PHY_MAX_RX_WINDOW: + { + phyParam.Value = AS923_MAX_RX_WINDOW; + break; + } + case PHY_RECEIVE_DELAY1: + { + phyParam.Value = AS923_RECEIVE_DELAY1; + break; + } + case PHY_RECEIVE_DELAY2: + { + phyParam.Value = AS923_RECEIVE_DELAY2; + break; + } + case PHY_JOIN_ACCEPT_DELAY1: + { + phyParam.Value = AS923_JOIN_ACCEPT_DELAY1; + break; + } + case PHY_JOIN_ACCEPT_DELAY2: + { + phyParam.Value = AS923_JOIN_ACCEPT_DELAY2; + break; + } + case PHY_MAX_FCNT_GAP: + { + phyParam.Value = AS923_MAX_FCNT_GAP; + break; + } + case PHY_ACK_TIMEOUT: + { + phyParam.Value = ( AS923_ACKTIMEOUT + randr( -AS923_ACK_TIMEOUT_RND, AS923_ACK_TIMEOUT_RND ) ); + break; + } + case PHY_DEF_DR1_OFFSET: + { + phyParam.Value = AS923_DEFAULT_RX1_DR_OFFSET; + break; + } + case PHY_DEF_RX2_FREQUENCY: + { + phyParam.Value = AS923_RX_WND_2_FREQ; + break; + } + case PHY_DEF_RX2_DR: + { + phyParam.Value = AS923_RX_WND_2_DR; + break; + } + case PHY_CHANNELS_MASK: + { + phyParam.ChannelsMask = ChannelsMask; + break; + } + case PHY_CHANNELS_DEFAULT_MASK: + { + phyParam.ChannelsMask = ChannelsDefaultMask; + break; + } + case PHY_MAX_NB_CHANNELS: + { + phyParam.Value = AS923_MAX_NB_CHANNELS; + break; + } + case PHY_CHANNELS: + { + phyParam.Channels = Channels; + break; + } + case PHY_DEF_UPLINK_DWELL_TIME: + { + phyParam.Value = AS923_DEFAULT_UPLINK_DWELL_TIME; + break; + } + case PHY_DEF_DOWNLINK_DWELL_TIME: + { + phyParam.Value = AS923_DEFAULT_DOWNLINK_DWELL_TIME; + break; + } + case PHY_DEF_MAX_EIRP: + { + phyParam.fValue = AS923_DEFAULT_MAX_EIRP; + break; + } + case PHY_DEF_ANTENNA_GAIN: + { + phyParam.fValue = AS923_DEFAULT_ANTENNA_GAIN; + break; + } + case PHY_NB_JOIN_TRIALS: + case PHY_DEF_NB_JOIN_TRIALS: + { + phyParam.Value = 1; + break; + } + default: + { + break; + } + } + + return phyParam; +} + +void RegionAS923SetBandTxDone( SetBandTxDoneParams_t* txDone ) +{ + RegionCommonSetBandTxDone( txDone->Joined, &Bands[Channels[txDone->Channel].Band], txDone->LastTxDoneTime ); +} + +void RegionAS923InitDefaults( InitType_t type ) +{ + switch( type ) + { + case INIT_TYPE_INIT: + { + // Channels + Channels[0] = ( ChannelParams_t ) AS923_LC1; + Channels[1] = ( ChannelParams_t ) AS923_LC2; + + // Initialize the channels default mask + ChannelsDefaultMask[0] = LC( 1 ) + LC( 2 ); + // Update the channels mask + RegionCommonChanMaskCopy( ChannelsMask, ChannelsDefaultMask, 1 ); + break; + } + case INIT_TYPE_RESTORE: + { + // Restore channels default mask + ChannelsMask[0] |= ChannelsDefaultMask[0]; + break; + } + default: + { + break; + } + } +} + +bool RegionAS923Verify( VerifyParams_t* verify, PhyAttribute_t phyAttribute ) +{ + switch( phyAttribute ) + { + case PHY_TX_DR: + { + if( verify->DatarateParams.UplinkDwellTime == 0 ) + { + return RegionCommonValueInRange( verify->DatarateParams.Datarate, AS923_TX_MIN_DATARATE, AS923_TX_MAX_DATARATE ); + } + else + { + return RegionCommonValueInRange( verify->DatarateParams.Datarate, AS923_DWELL_LIMIT_DATARATE, AS923_TX_MAX_DATARATE ); + } + } + case PHY_DEF_TX_DR: + { + return RegionCommonValueInRange( verify->DatarateParams.Datarate, DR_0, DR_5 ); + } + case PHY_RX_DR: + { + if( verify->DatarateParams.DownlinkDwellTime == 0 ) + { + return RegionCommonValueInRange( verify->DatarateParams.Datarate, AS923_RX_MIN_DATARATE, AS923_RX_MAX_DATARATE ); + } + else + { + return RegionCommonValueInRange( verify->DatarateParams.Datarate, AS923_DWELL_LIMIT_DATARATE, AS923_RX_MAX_DATARATE ); + } + } + case PHY_DEF_TX_POWER: + case PHY_TX_POWER: + { + // Remark: switched min and max! + return RegionCommonValueInRange( verify->TxPower, AS923_MAX_TX_POWER, AS923_MIN_TX_POWER ); + } + case PHY_DUTY_CYCLE: + { + return AS923_DUTY_CYCLE_ENABLED; + } + case PHY_NB_JOIN_TRIALS: + { + return true; + } + default: + return false; + } +} + +void RegionAS923ApplyCFList( ApplyCFListParams_t* applyCFList ) +{ + ChannelParams_t newChannel; + ChannelAddParams_t channelAdd; + ChannelRemoveParams_t channelRemove; + + // Setup default datarate range + newChannel.DrRange.Value = ( DR_5 << 4 ) | DR_0; + + // Size of the optional CF list + if( applyCFList->Size != 16 ) + { + return; + } + + // Last byte is RFU, don't take it into account + for( uint8_t i = 0, chanIdx = AS923_NUMB_DEFAULT_CHANNELS; chanIdx < AS923_MAX_NB_CHANNELS; i+=3, chanIdx++ ) + { + if( chanIdx < ( AS923_NUMB_CHANNELS_CF_LIST + AS923_NUMB_DEFAULT_CHANNELS ) ) + { + // Channel frequency + newChannel.Frequency = (uint32_t) applyCFList->Payload[i]; + newChannel.Frequency |= ( (uint32_t) applyCFList->Payload[i + 1] << 8 ); + newChannel.Frequency |= ( (uint32_t) applyCFList->Payload[i + 2] << 16 ); + newChannel.Frequency *= 100; + + // Initialize alternative frequency to 0 + newChannel.Rx1Frequency = 0; + } + else + { + newChannel.Frequency = 0; + newChannel.DrRange.Value = 0; + newChannel.Rx1Frequency = 0; + } + + if( newChannel.Frequency != 0 ) + { + channelAdd.NewChannel = &newChannel; + channelAdd.ChannelId = chanIdx; + + // Try to add all channels + RegionAS923ChannelAdd( &channelAdd ); + } + else + { + channelRemove.ChannelId = chanIdx; + + RegionAS923ChannelsRemove( &channelRemove ); + } + } +} + +bool RegionAS923ChanMaskSet( ChanMaskSetParams_t* chanMaskSet ) +{ + switch( chanMaskSet->ChannelsMaskType ) + { + case CHANNELS_MASK: + { + RegionCommonChanMaskCopy( ChannelsMask, chanMaskSet->ChannelsMaskIn, 1 ); + break; + } + case CHANNELS_DEFAULT_MASK: + { + RegionCommonChanMaskCopy( ChannelsDefaultMask, chanMaskSet->ChannelsMaskIn, 1 ); + break; + } + default: + return false; + } + return true; +} + +bool RegionAS923AdrNext( AdrNextParams_t* adrNext, int8_t* drOut, int8_t* txPowOut, uint32_t* adrAckCounter ) +{ + bool adrAckReq = false; + int8_t datarate = adrNext->Datarate; + int8_t minTxDatarate = 0; + int8_t txPower = adrNext->TxPower; + GetPhyParams_t getPhy; + PhyParam_t phyParam; + + // Get the minimum possible datarate + getPhy.Attribute = PHY_MIN_TX_DR; + getPhy.UplinkDwellTime = adrNext->UplinkDwellTime; + phyParam = RegionAS923GetPhyParam( &getPhy ); + minTxDatarate = phyParam.Value; + + // Report back the adr ack counter + *adrAckCounter = adrNext->AdrAckCounter; + + // Apply the minimum possible datarate. + datarate = MAX( datarate, minTxDatarate ); + + if( adrNext->AdrEnabled == true ) + { + if( datarate == minTxDatarate ) + { + *adrAckCounter = 0; + adrAckReq = false; + } + else + { + if( adrNext->AdrAckCounter >= AS923_ADR_ACK_LIMIT ) + { + adrAckReq = true; + txPower = AS923_MAX_TX_POWER; + } + else + { + adrAckReq = false; + } + if( adrNext->AdrAckCounter >= ( AS923_ADR_ACK_LIMIT + AS923_ADR_ACK_DELAY ) ) + { + if( ( adrNext->AdrAckCounter % AS923_ADR_ACK_DELAY ) == 1 ) + { + // Decrease the datarate + getPhy.Attribute = PHY_NEXT_LOWER_TX_DR; + getPhy.Datarate = datarate; + getPhy.UplinkDwellTime = adrNext->UplinkDwellTime; + phyParam = RegionAS923GetPhyParam( &getPhy ); + datarate = phyParam.Value; + + if( datarate == minTxDatarate ) + { + // We must set adrAckReq to false as soon as we reach the lowest datarate + adrAckReq = false; + if( adrNext->UpdateChanMask == true ) + { + // Re-enable default channels + ChannelsMask[0] |= LC( 1 ) + LC( 2 ); + } + } + } + } + } + } + + *drOut = datarate; + *txPowOut = txPower; + return adrAckReq; +} + +void RegionAS923ComputeRxWindowParameters( int8_t datarate, uint8_t minRxSymbols, uint32_t rxError, RxConfigParams_t *rxConfigParams ) +{ + double tSymbol = 0.0; + + // Get the datarate, perform a boundary check + rxConfigParams->Datarate = MIN( datarate, AS923_RX_MAX_DATARATE ); + rxConfigParams->Bandwidth = GetBandwidth( rxConfigParams->Datarate ); + + if( rxConfigParams->Datarate == DR_7 ) + { // FSK + tSymbol = RegionCommonComputeSymbolTimeFsk( DataratesAS923[rxConfigParams->Datarate] ); + } + else + { // LoRa + tSymbol = RegionCommonComputeSymbolTimeLoRa( DataratesAS923[rxConfigParams->Datarate], BandwidthsAS923[rxConfigParams->Datarate] ); + } + + RegionCommonComputeRxWindowParameters( tSymbol, minRxSymbols, rxError, RADIO_WAKEUP_TIME, &rxConfigParams->WindowTimeout, &rxConfigParams->WindowOffset ); +} + +bool RegionAS923RxConfig( RxConfigParams_t* rxConfig, int8_t* datarate ) +{ + RadioModems_t modem; + int8_t dr = rxConfig->Datarate; + uint8_t maxPayload = 0; + int8_t phyDr = 0; + uint32_t frequency = rxConfig->Frequency; + + if( Radio.GetStatus( ) != RF_IDLE ) + { + return false; + } + + if( rxConfig->Window == 0 ) + { + // Apply window 1 frequency + frequency = Channels[rxConfig->Channel].Frequency; + // Apply the alternative RX 1 window frequency, if it is available + if( Channels[rxConfig->Channel].Rx1Frequency != 0 ) + { + frequency = Channels[rxConfig->Channel].Rx1Frequency; + } + // Add junhua ,return the selected frequency + rxConfig->Frequency = frequency; + } + + // Read the physical datarate from the datarates table + phyDr = DataratesAS923[dr]; + + Radio.SetChannel( frequency ); + + // Radio configuration + if( dr == DR_7 ) + { + modem = MODEM_FSK; + Radio.SetRxConfig( modem, 50000, phyDr * 1000, 0, 83333, 5, rxConfig->WindowTimeout, false, 0, true, 0, 0, false, rxConfig->RxContinuous ); + } + else + { + modem = MODEM_LORA; + Radio.SetRxConfig( modem, rxConfig->Bandwidth, phyDr, 1, 0, 8, rxConfig->WindowTimeout, false, 0, false, 0, 0, true, rxConfig->RxContinuous ); + } + + // Check for repeater support + if( rxConfig->RepeaterSupport == true ) + { + maxPayload = MaxPayloadOfDatarateRepeaterDwell0AS923[dr]; + } + else + { + maxPayload = MaxPayloadOfDatarateDwell0AS923[dr]; + } + + Radio.SetMaxPayloadLength( modem, maxPayload + LORA_MAC_FRMPAYLOAD_OVERHEAD ); + + *datarate = (uint8_t) dr; + + return true; +} + +bool RegionAS923TxConfig( TxConfigParams_t* txConfig, int8_t* txPower, TimerTime_t* txTimeOnAir ) +{ + RadioModems_t modem; + int8_t phyDr = DataratesAS923[txConfig->Datarate]; + int8_t txPowerLimited = LimitTxPower( txConfig->TxPower, Bands[Channels[txConfig->Channel].Band].TxMaxPower, txConfig->Datarate, ChannelsMask ); + uint32_t bandwidth = GetBandwidth( txConfig->Datarate ); + int8_t phyTxPower = 0; + + // Calculate physical TX power + phyTxPower = RegionCommonComputeTxPower( txPowerLimited, txConfig->MaxEirp, txConfig->AntennaGain ); + + // Setup the radio frequency + Radio.SetChannel( Channels[txConfig->Channel].Frequency ); + + if( txConfig->Datarate == DR_7 ) + { // High Speed FSK channel + modem = MODEM_FSK; + Radio.SetTxConfig( modem, phyTxPower, 25000, bandwidth, phyDr * 1000, 0, 5, false, true, 0, 0, false, 3000 ); + } + else + { + modem = MODEM_LORA; + Radio.SetTxConfig( modem, phyTxPower, 0, bandwidth, phyDr, 1, 8, false, true, 0, 0, false, 3000 ); + } + + // Setup maximum payload lenght of the radio driver + Radio.SetMaxPayloadLength( modem, txConfig->PktLen ); + // Get the time-on-air of the next tx frame + *txTimeOnAir = Radio.TimeOnAir( modem, txConfig->PktLen ); + + *txPower = txPowerLimited; + + DPRINTF("\r\nFreq=%d, txP=%d dbm, DR%d ,tm=%d\r\n", Channels[txConfig->Channel].Frequency, phyTxPower, txConfig->Datarate, *txTimeOnAir); + + return true; +} + +uint8_t RegionAS923LinkAdrReq( LinkAdrReqParams_t* linkAdrReq, int8_t* drOut, int8_t* txPowOut, uint8_t* nbRepOut, uint8_t* nbBytesParsed ) +{ + uint8_t status = 0x07; + RegionCommonLinkAdrParams_t linkAdrParams; + uint8_t nextIndex = 0; + uint8_t bytesProcessed = 0; + uint16_t chMask = 0; + GetPhyParams_t getPhy; + PhyParam_t phyParam; + RegionCommonLinkAdrReqVerifyParams_t linkAdrVerifyParams; + + while( bytesProcessed < linkAdrReq->PayloadSize ) + { + // Get ADR request parameters + nextIndex = RegionCommonParseLinkAdrReq( &( linkAdrReq->Payload[bytesProcessed] ), &linkAdrParams ); + + if( nextIndex == 0 ) + break; // break loop, since no more request has been found + + // Update bytes processed + bytesProcessed += nextIndex; + + // Revert status, as we only check the last ADR request for the channel mask KO + status = 0x07; + + // Setup temporary channels mask + chMask = linkAdrParams.ChMask; + + // Verify channels mask + if( ( linkAdrParams.ChMaskCtrl == 0 ) && ( chMask == 0 ) ) + { + status &= 0xFE; // Channel mask KO + } + else if( ( ( linkAdrParams.ChMaskCtrl >= 1 ) && ( linkAdrParams.ChMaskCtrl <= 5 )) || + ( linkAdrParams.ChMaskCtrl >= 7 ) ) + { + // RFU + status &= 0xFE; // Channel mask KO + } + else + { + for( uint8_t i = 0; i < AS923_MAX_NB_CHANNELS; i++ ) + { + if( linkAdrParams.ChMaskCtrl == 6 ) + { + if( Channels[i].Frequency != 0 ) + { + chMask |= 1 << i; + } + } + else + { + if( ( ( chMask & ( 1 << i ) ) != 0 ) && + ( Channels[i].Frequency == 0 ) ) + {// Trying to enable an undefined channel + status &= 0xFE; // Channel mask KO + } + } + } + } + } + + // Get the minimum possible datarate + getPhy.Attribute = PHY_MIN_TX_DR; + getPhy.UplinkDwellTime = linkAdrReq->UplinkDwellTime; + phyParam = RegionAS923GetPhyParam( &getPhy ); + + linkAdrVerifyParams.Status = status; + linkAdrVerifyParams.AdrEnabled = linkAdrReq->AdrEnabled; + linkAdrVerifyParams.Datarate = linkAdrParams.Datarate; + linkAdrVerifyParams.TxPower = linkAdrParams.TxPower; + linkAdrVerifyParams.NbRep = linkAdrParams.NbRep; + linkAdrVerifyParams.CurrentDatarate = linkAdrReq->CurrentDatarate; + linkAdrVerifyParams.CurrentTxPower = linkAdrReq->CurrentTxPower; + linkAdrVerifyParams.CurrentNbRep = linkAdrReq->CurrentNbRep; + linkAdrVerifyParams.NbChannels = AS923_MAX_NB_CHANNELS; + linkAdrVerifyParams.ChannelsMask = &chMask; + linkAdrVerifyParams.MinDatarate = ( int8_t )phyParam.Value; + linkAdrVerifyParams.MaxDatarate = AS923_TX_MAX_DATARATE; + linkAdrVerifyParams.Channels = Channels; + linkAdrVerifyParams.MinTxPower = AS923_MIN_TX_POWER; + linkAdrVerifyParams.MaxTxPower = AS923_MAX_TX_POWER; + + // Verify the parameters and update, if necessary + status = RegionCommonLinkAdrReqVerifyParams( &linkAdrVerifyParams, &linkAdrParams.Datarate, &linkAdrParams.TxPower, &linkAdrParams.NbRep ); + + // Update channelsMask if everything is correct + if( status == 0x07 ) + { + // Set the channels mask to a default value + memset( ChannelsMask, 0, sizeof( ChannelsMask ) ); + // Update the channels mask + ChannelsMask[0] = chMask; + } + + // Update status variables + *drOut = linkAdrParams.Datarate; + *txPowOut = linkAdrParams.TxPower; + *nbRepOut = linkAdrParams.NbRep; + *nbBytesParsed = bytesProcessed; + + return status; +} + +uint8_t RegionAS923RxParamSetupReq( RxParamSetupReqParams_t* rxParamSetupReq ) +{ + uint8_t status = 0x07; + + // Verify radio frequency + if( Radio.CheckRfFrequency( rxParamSetupReq->Frequency ) == false ) + { + status &= 0xFE; // Channel frequency KO + } + + // Verify datarate + if( RegionCommonValueInRange( rxParamSetupReq->Datarate, AS923_RX_MIN_DATARATE, AS923_RX_MAX_DATARATE ) == false ) + { + status &= 0xFD; // Datarate KO + } + + // Verify datarate offset + if( RegionCommonValueInRange( rxParamSetupReq->DrOffset, AS923_MIN_RX1_DR_OFFSET, AS923_MAX_RX1_DR_OFFSET ) == false ) + { + status &= 0xFB; // Rx1DrOffset range KO + } + + return status; +} + +uint8_t RegionAS923NewChannelReq( NewChannelReqParams_t* newChannelReq ) +{ + uint8_t status = 0x03; + ChannelAddParams_t channelAdd; + ChannelRemoveParams_t channelRemove; + + if( newChannelReq->NewChannel->Frequency == 0 ) + { + channelRemove.ChannelId = newChannelReq->ChannelId; + + // Remove + if( RegionAS923ChannelsRemove( &channelRemove ) == false ) + { + status &= 0xFC; + } + } + else + { + channelAdd.NewChannel = newChannelReq->NewChannel; + channelAdd.ChannelId = newChannelReq->ChannelId; + + switch( RegionAS923ChannelAdd( &channelAdd ) ) + { + case LORAMAC_STATUS_OK: + { + break; + } + case LORAMAC_STATUS_FREQUENCY_INVALID: + { + status &= 0xFE; + break; + } + case LORAMAC_STATUS_DATARATE_INVALID: + { + status &= 0xFD; + break; + } + case LORAMAC_STATUS_FREQ_AND_DR_INVALID: + { + status &= 0xFC; + break; + } + default: + { + status &= 0xFC; + break; + } + } + } + + return status; +} + +int8_t RegionAS923TxParamSetupReq( TxParamSetupReqParams_t* txParamSetupReq ) +{ + // Accept the request + return 0; +} + +uint8_t RegionAS923DlChannelReq( DlChannelReqParams_t* dlChannelReq ) +{ + uint8_t status = 0x03; + + // Verify if the frequency is supported + if( VerifyTxFreq( dlChannelReq->Rx1Frequency ) == false ) + { + status &= 0xFE; + } + + // Verify if an uplink frequency exists + if( Channels[dlChannelReq->ChannelId].Frequency == 0 ) + { + status &= 0xFD; + } + + // Apply Rx1 frequency, if the status is OK + if( status == 0x03 ) + { + Channels[dlChannelReq->ChannelId].Rx1Frequency = dlChannelReq->Rx1Frequency; + } + + return status; +} + +int8_t RegionAS923AlternateDr( AlternateDrParams_t* alternateDr ) +{ + // Only AS923_DWELL_LIMIT_DATARATE is supported + return AS923_DWELL_LIMIT_DATARATE; +} + +void RegionAS923CalcBackOff( CalcBackOffParams_t* calcBackOff ) +{ + RegionCommonCalcBackOffParams_t calcBackOffParams; + + calcBackOffParams.Channels = Channels; + calcBackOffParams.Bands = Bands; + calcBackOffParams.LastTxIsJoinRequest = calcBackOff->LastTxIsJoinRequest; + calcBackOffParams.Joined = calcBackOff->Joined; + calcBackOffParams.DutyCycleEnabled = calcBackOff->DutyCycleEnabled; + calcBackOffParams.Channel = calcBackOff->Channel; + calcBackOffParams.ElapsedTime = calcBackOff->ElapsedTime; + calcBackOffParams.TxTimeOnAir = calcBackOff->TxTimeOnAir; + + RegionCommonCalcBackOff( &calcBackOffParams ); +} + +bool RegionAS923NextChannel( NextChanParams_t* nextChanParams, uint8_t* channel, TimerTime_t* time, TimerTime_t* aggregatedTimeOff ) +{ + uint8_t channelNext = 0; + uint8_t nbEnabledChannels = 0; + uint8_t delayTx = 0; + uint8_t enabledChannels[AS923_MAX_NB_CHANNELS] = { 0 }; + TimerTime_t nextTxDelay = 0; + + if( RegionCommonCountChannels( ChannelsMask, 0, 1 ) == 0 ) + { // Reactivate default channels + ChannelsMask[0] |= LC( 1 ) + LC( 2 ); + } + + if( nextChanParams->AggrTimeOff <= TimerGetElapsedTime( nextChanParams->LastAggrTx ) ) + { + // Reset Aggregated time off + *aggregatedTimeOff = 0; + + // Update bands Time OFF + nextTxDelay = RegionCommonUpdateBandTimeOff( nextChanParams->Joined, nextChanParams->DutyCycleEnabled, Bands, AS923_MAX_NB_BANDS ); + + // Search how many channels are enabled + nbEnabledChannels = CountNbOfEnabledChannels( nextChanParams->Joined, nextChanParams->Datarate, + ChannelsMask, Channels, + Bands, enabledChannels, &delayTx ); + } + else + { + delayTx++; + nextTxDelay = nextChanParams->AggrTimeOff - TimerGetElapsedTime( nextChanParams->LastAggrTx ); + } + + if( nbEnabledChannels > 0 ) + { + for( uint8_t i = 0, j = randr( 0, nbEnabledChannels - 1 ); i < AS923_MAX_NB_CHANNELS; i++ ) + { + channelNext = enabledChannels[j]; + j = ( j + 1 ) % nbEnabledChannels; + + // Perform carrier sense for AS923_CARRIER_SENSE_TIME + // If the channel is free, we can stop the LBT mechanism + if( Radio.IsChannelFree( MODEM_LORA, Channels[channelNext].Frequency, AS923_RSSI_FREE_TH, AS923_CARRIER_SENSE_TIME ) == true ) + { + // Free channel found + *channel = channelNext; + *time = 0; + return true; + } + } + return false; + } + else + { + if( delayTx > 0 ) + { + // Delay transmission due to AggregatedTimeOff or to a band time off + *time = nextTxDelay; + return true; + } + // Datarate not supported by any channel, restore defaults + ChannelsMask[0] |= LC( 1 ) + LC( 2 ); + *time = 0; + return false; + } +} + +LoRaMacStatus_t RegionAS923ChannelAdd( ChannelAddParams_t* channelAdd ) +{ + uint8_t band = 0; + bool drInvalid = false; + bool freqInvalid = false; + uint8_t id = channelAdd->ChannelId; + + if( id >= AS923_MAX_NB_CHANNELS ) + { + return LORAMAC_STATUS_PARAMETER_INVALID; + } + + // Validate the datarate range + if( RegionCommonValueInRange( channelAdd->NewChannel->DrRange.Fields.Min, AS923_TX_MIN_DATARATE, AS923_TX_MAX_DATARATE ) == false ) + { + drInvalid = true; + } + if( RegionCommonValueInRange( channelAdd->NewChannel->DrRange.Fields.Max, AS923_TX_MIN_DATARATE, AS923_TX_MAX_DATARATE ) == false ) + { + drInvalid = true; + } + if( channelAdd->NewChannel->DrRange.Fields.Min > channelAdd->NewChannel->DrRange.Fields.Max ) + { + drInvalid = true; + } + + // Default channels don't accept all values + if( id < AS923_NUMB_DEFAULT_CHANNELS ) + { + // Validate the datarate range for min: must be DR_0 + if( channelAdd->NewChannel->DrRange.Fields.Min > DR_0 ) + { + drInvalid = true; + } + // Validate the datarate range for max: must be DR_5 <= Max <= TX_MAX_DATARATE + if( RegionCommonValueInRange( channelAdd->NewChannel->DrRange.Fields.Max, DR_5, AS923_TX_MAX_DATARATE ) == false ) + { + drInvalid = true; + } + // We are not allowed to change the frequency + if( channelAdd->NewChannel->Frequency != Channels[id].Frequency ) + { + freqInvalid = true; + } + } + + // Check frequency + if( freqInvalid == false ) + { + if( VerifyTxFreq( channelAdd->NewChannel->Frequency ) == false ) + { + freqInvalid = true; + } + } + + // Check status + if( ( drInvalid == true ) && ( freqInvalid == true ) ) + { + return LORAMAC_STATUS_FREQ_AND_DR_INVALID; + } + if( drInvalid == true ) + { + return LORAMAC_STATUS_DATARATE_INVALID; + } + if( freqInvalid == true ) + { + return LORAMAC_STATUS_FREQUENCY_INVALID; + } + + memcpy( &(Channels[id]), channelAdd->NewChannel, sizeof( Channels[id] ) ); + Channels[id].Band = band; + ChannelsMask[0] |= ( 1 << id ); + return LORAMAC_STATUS_OK; +} + +bool RegionAS923ChannelsRemove( ChannelRemoveParams_t* channelRemove ) +{ + uint8_t id = channelRemove->ChannelId; + + if( id < AS923_NUMB_DEFAULT_CHANNELS ) + { + return false; + } + + // Remove the channel from the list of channels + Channels[id] = ( ChannelParams_t ){ 0, 0, { 0 }, 0 }; + + return RegionCommonChanDisable( ChannelsMask, id, AS923_MAX_NB_CHANNELS ); +} + +void RegionAS923SetContinuousWave( ContinuousWaveParams_t* continuousWave ) +{ + int8_t txPowerLimited = LimitTxPower( continuousWave->TxPower, Bands[Channels[continuousWave->Channel].Band].TxMaxPower, continuousWave->Datarate, ChannelsMask ); + int8_t phyTxPower = 0; + uint32_t frequency = Channels[continuousWave->Channel].Frequency; + + // Calculate physical TX power + phyTxPower = RegionCommonComputeTxPower( txPowerLimited, continuousWave->MaxEirp, continuousWave->AntennaGain ); + + Radio.SetTxContinuousWave( frequency, phyTxPower, continuousWave->Timeout ); +} + +uint8_t RegionAS923ApplyDrOffset( uint8_t downlinkDwellTime, int8_t dr, int8_t drOffset ) +{ + // Initialize minDr for a downlink dwell time configuration of 0 + int8_t minDr = DR_0; + + // Update the minDR for a downlink dwell time configuration of 1 + if( downlinkDwellTime == 1 ) + { + minDr = AS923_DWELL_LIMIT_DATARATE; + } + + // Apply offset formula + return MIN( DR_5, MAX( minDr, dr - EffectiveRx1DrOffsetAS923[drOffset] ) ); +} diff --git a/src/mac/region/RegionAS923.h b/src/mac/region/RegionAS923.h new file mode 100755 index 0000000..ed4f9cc --- /dev/null +++ b/src/mac/region/RegionAS923.h @@ -0,0 +1,503 @@ +/*! + * \file RegionAS923.h + * + * \brief Region definition for AS923 + * + * \copyright Revised BSD License, see section \ref LICENSE. + * + * \code + * ______ _ + * / _____) _ | | + * ( (____ _____ ____ _| |_ _____ ____| |__ + * \____ \| ___ | (_ _) ___ |/ ___) _ \ + * _____) ) ____| | | || |_| ____( (___| | | | + * (______/|_____)_|_|_| \__)_____)\____)_| |_| + * (C)2013 Semtech + * + * ___ _____ _ ___ _ _____ ___ ___ ___ ___ + * / __|_ _/_\ / __| |/ / __/ _ \| _ \/ __| __| + * \__ \ | |/ _ \ (__| ' <| _| (_) | / (__| _| + * |___/ |_/_/ \_\___|_|\_\_| \___/|_|_\\___|___| + * embedded.connectivity.solutions=============== + * + * \endcode + * + * \author Miguel Luis ( Semtech ) + * + * \author Gregory Cristian ( Semtech ) + * + * \author Daniel Jaeckle ( STACKFORCE ) + * + * \defgroup REGIONAS923 Region AS923 + * Implementation according to LoRaWAN Specification v1.0.2. + * \{ + */ +#ifndef __REGION_AS923_H__ +#define __REGION_AS923_H__ + +/*! + * LoRaMac maximum number of channels + */ +#define AS923_MAX_NB_CHANNELS 16 + +/*! + * Number of default channels + */ +#define AS923_NUMB_DEFAULT_CHANNELS 2 + +/*! + * Number of channels to apply for the CF list + */ +#define AS923_NUMB_CHANNELS_CF_LIST 5 + +/*! + * Minimal datarate that can be used by the node + */ +#define AS923_TX_MIN_DATARATE DR_0 + +/*! + * Maximal datarate that can be used by the node + */ +#define AS923_TX_MAX_DATARATE DR_7 + +/*! + * Minimal datarate that can be used by the node + */ +#define AS923_RX_MIN_DATARATE DR_0 + +/*! + * Maximal datarate that can be used by the node + */ +#define AS923_RX_MAX_DATARATE DR_7 + +/*! + * Default datarate used by the node + */ +#define AS923_DEFAULT_DATARATE DR_2 + +/*! + * The minimum datarate which is used when the + * dwell time is limited. + */ +#define AS923_DWELL_LIMIT_DATARATE DR_2 + +/*! + * Minimal Rx1 receive datarate offset + */ +#define AS923_MIN_RX1_DR_OFFSET 0 + +/*! + * Maximal Rx1 receive datarate offset + */ +#define AS923_MAX_RX1_DR_OFFSET 7 + +/*! + * Default Rx1 receive datarate offset + */ +#define AS923_DEFAULT_RX1_DR_OFFSET 0 + +/*! + * Minimal Tx output power that can be used by the node + */ +#define AS923_MIN_TX_POWER TX_POWER_7 + +/*! + * Maximal Tx output power that can be used by the node + */ +#define AS923_MAX_TX_POWER TX_POWER_0 + +/*! + * Default Tx output power used by the node + */ +#define AS923_DEFAULT_TX_POWER TX_POWER_0 + +/*! + * Default uplink dwell time configuration + */ +#define AS923_DEFAULT_UPLINK_DWELL_TIME 1 + +/*! + * Default downlink dwell time configuration + */ +#define AS923_DEFAULT_DOWNLINK_DWELL_TIME 1 + +/*! + * Default Max EIRP + */ +#define AS923_DEFAULT_MAX_EIRP 16.0f + +/*! + * Default antenna gain + */ +#define AS923_DEFAULT_ANTENNA_GAIN 2.15f + +/*! + * ADR Ack limit + */ +#define AS923_ADR_ACK_LIMIT 64 + +/*! + * ADR Ack delay + */ +#define AS923_ADR_ACK_DELAY 32 + +/*! + * Enabled or disabled the duty cycle + */ +#define AS923_DUTY_CYCLE_ENABLED 0 + +/*! + * Maximum RX window duration + */ +#define AS923_MAX_RX_WINDOW 3000 + +/*! + * Receive delay 1 + */ +#define AS923_RECEIVE_DELAY1 1000 + +/*! + * Receive delay 2 + */ +#define AS923_RECEIVE_DELAY2 2000 + +/*! + * Join accept delay 1 + */ +#define AS923_JOIN_ACCEPT_DELAY1 5000 + +/*! + * Join accept delay 2 + */ +#define AS923_JOIN_ACCEPT_DELAY2 6000 + +/*! + * Maximum frame counter gap + */ +#define AS923_MAX_FCNT_GAP 16384 + +/*! + * Ack timeout + */ +#define AS923_ACKTIMEOUT 2000 + +/*! + * Random ack timeout limits + */ +#define AS923_ACK_TIMEOUT_RND 1000 + +#if ( AS923_DEFAULT_DATARATE > DR_5 ) +#error "A default DR higher than DR_5 may lead to connectivity loss." +#endif + +/*! + * Second reception window channel frequency definition. + */ +#define AS923_RX_WND_2_FREQ 923200000 + +/*! + * Second reception window channel datarate definition. + */ +#define AS923_RX_WND_2_DR DR_2 + +/*! + * Maximum number of bands + */ +#define AS923_MAX_NB_BANDS 1 + +/*! + * Band 0 definition + * { DutyCycle, TxMaxPower, LastTxDoneTime, TimeOff } + */ +#define AS923_BAND0 { 100, AS923_MAX_TX_POWER, 0, 0 } // 1.0 % + +/*! + * LoRaMac default channel 1 + * Channel = { Frequency [Hz], RX1 Frequency [Hz], { ( ( DrMax << 4 ) | DrMin ) }, Band } + */ +#define AS923_LC1 { 923200000, 0, { ( ( DR_5 << 4 ) | DR_0 ) }, 0 } + +/*! + * LoRaMac default channel 2 + * Channel = { Frequency [Hz], RX1 Frequency [Hz], { ( ( DrMax << 4 ) | DrMin ) }, Band } + */ +#define AS923_LC2 { 923400000, 0, { ( ( DR_5 << 4 ) | DR_0 ) }, 0 } + +/*! + * LoRaMac channels which are allowed for the join procedure + */ +#define AS923_JOIN_CHANNELS ( uint16_t )( LC( 1 ) | LC( 2 ) ) + +/*! + * RSSI threshold for a free channel [dBm] + */ +#define AS923_RSSI_FREE_TH -85 + +/*! + * Specifies the time the node performs a carrier sense + */ +#define AS923_CARRIER_SENSE_TIME 6 + +/*! + * Data rates table definition + */ +static const uint8_t DataratesAS923[] = { 12, 11, 10, 9, 8, 7, 7, 50 }; + +/*! + * Bandwidths table definition in Hz + */ +static const uint32_t BandwidthsAS923[] = { 125000, 125000, 125000, 125000, 125000, 125000, 250000, 0 }; + +/*! + * Maximum payload with respect to the datarate index. Cannot operate with repeater. + * The table is valid for the dwell time configuration of 0 for uplinks and downlinks. + */ +static const uint8_t MaxPayloadOfDatarateDwell0AS923[] = { 51, 51, 51, 115, 242, 242, 242, 242 }; + +/*! + * Maximum payload with respect to the datarate index. Can operate with repeater. + * The table is valid for the dwell time configuration of 0 for uplinks and downlinks. The table provides + * repeater support. + */ +static const uint8_t MaxPayloadOfDatarateRepeaterDwell0AS923[] = { 51, 51, 51, 115, 222, 222, 222, 222 }; + +/*! + * Maximum payload with respect to the datarate index. Can operate with and without repeater. + * The table proides repeater support. The table is only valid for uplinks. + */ +static const uint8_t MaxPayloadOfDatarateDwell1UpAS923[] = { 0, 0, 11, 53, 125, 242, 242, 242 }; + +/*! + * Maximum payload with respect to the datarate index. Can operate with and without repeater. + * The table proides repeater support. The table is only valid for downlinks. + */ +static const uint8_t MaxPayloadOfDatarateDwell1DownAS923[] = { 0, 0, 11, 53, 126, 242, 242, 242 }; + +/*! + * Effective datarate offsets for receive window 1. + */ +static const int8_t EffectiveRx1DrOffsetAS923[] = { 0, 1, 2, 3, 4, 5, -1, -2 }; + +/*! + * \brief The function gets a value of a specific phy attribute. + * + * \param [IN] getPhy Pointer to the function parameters. + * + * \retval Returns a structure containing the PHY parameter. + */ +PhyParam_t RegionAS923GetPhyParam( GetPhyParams_t* getPhy ); + +/*! + * \brief Updates the last TX done parameters of the current channel. + * + * \param [IN] txDone Pointer to the function parameters. + */ +void RegionAS923SetBandTxDone( SetBandTxDoneParams_t* txDone ); + +/*! + * \brief Initializes the channels masks and the channels. + * + * \param [IN] type Sets the initialization type. + */ +void RegionAS923InitDefaults( InitType_t type ); + +/*! + * \brief Verifies a parameter. + * + * \param [IN] verify Pointer to the function parameters. + * + * \param [IN] type Sets the initialization type. + * + * \retval Returns true, if the parameter is valid. + */ +bool RegionAS923Verify( VerifyParams_t* verify, PhyAttribute_t phyAttribute ); + +/*! + * \brief The function parses the input buffer and sets up the channels of the + * CF list. + * + * \param [IN] applyCFList Pointer to the function parameters. + */ +void RegionAS923ApplyCFList( ApplyCFListParams_t* applyCFList ); + +/*! + * \brief Sets a channels mask. + * + * \param [IN] chanMaskSet Pointer to the function parameters. + * + * \retval Returns true, if the channels mask could be set. + */ +bool RegionAS923ChanMaskSet( ChanMaskSetParams_t* chanMaskSet ); + +/*! + * \brief Calculates the next datarate to set, when ADR is on or off. + * + * \param [IN] adrNext Pointer to the function parameters. + * + * \param [OUT] drOut The calculated datarate for the next TX. + * + * \param [OUT] txPowOut The TX power for the next TX. + * + * \param [OUT] adrAckCounter The calculated ADR acknowledgement counter. + * + * \retval Returns true, if an ADR request should be performed. + */ +bool RegionAS923AdrNext( AdrNextParams_t* adrNext, int8_t* drOut, int8_t* txPowOut, uint32_t* adrAckCounter ); + +/*! + * Computes the Rx window timeout and offset. + * + * \param [IN] datarate Rx window datarate index to be used + * + * \param [IN] minRxSymbols Minimum required number of symbols to detect an Rx frame. + * + * \param [IN] rxError System maximum timing error of the receiver. In milliseconds + * The receiver will turn on in a [-rxError : +rxError] ms + * interval around RxOffset + * + * \param [OUT]rxConfigParams Returns updated WindowTimeout and WindowOffset fields. + */ +void RegionAS923ComputeRxWindowParameters( int8_t datarate, uint8_t minRxSymbols, uint32_t rxError, RxConfigParams_t *rxConfigParams ); + +/*! + * \brief Configuration of the RX windows. + * + * \param [IN] rxConfig Pointer to the function parameters. + * + * \param [OUT] datarate The datarate index which was set. + * + * \retval Returns true, if the configuration was applied successfully. + */ +bool RegionAS923RxConfig( RxConfigParams_t* rxConfig, int8_t* datarate ); + +/*! + * \brief TX configuration. + * + * \param [IN] txConfig Pointer to the function parameters. + * + * \param [OUT] txPower The tx power index which was set. + * + * \param [OUT] txTimeOnAir The time-on-air of the frame. + * + * \retval Returns true, if the configuration was applied successfully. + */ +bool RegionAS923TxConfig( TxConfigParams_t* txConfig, int8_t* txPower, TimerTime_t* txTimeOnAir ); + +/*! + * \brief The function processes a Link ADR Request. + * + * \param [IN] linkAdrReq Pointer to the function parameters. + * + * \retval Returns the status of the operation, according to the LoRaMAC specification. + */ +uint8_t RegionAS923LinkAdrReq( LinkAdrReqParams_t* linkAdrReq, int8_t* drOut, int8_t* txPowOut, uint8_t* nbRepOut, uint8_t* nbBytesParsed ); + +/*! + * \brief The function processes a RX Parameter Setup Request. + * + * \param [IN] rxParamSetupReq Pointer to the function parameters. + * + * \retval Returns the status of the operation, according to the LoRaMAC specification. + */ +uint8_t RegionAS923RxParamSetupReq( RxParamSetupReqParams_t* rxParamSetupReq ); + +/*! + * \brief The function processes a Channel Request. + * + * \param [IN] newChannelReq Pointer to the function parameters. + * + * \retval Returns the status of the operation, according to the LoRaMAC specification. + */ +uint8_t RegionAS923NewChannelReq( NewChannelReqParams_t* newChannelReq ); + +/*! + * \brief The function processes a TX ParamSetup Request. + * + * \param [IN] txParamSetupReq Pointer to the function parameters. + * + * \retval Returns the status of the operation, according to the LoRaMAC specification. + * Returns -1, if the functionality is not implemented. In this case, the end node + * shall not process the command. + */ +int8_t RegionAS923TxParamSetupReq( TxParamSetupReqParams_t* txParamSetupReq ); + +/*! + * \brief The function processes a DlChannel Request. + * + * \param [IN] dlChannelReq Pointer to the function parameters. + * + * \retval Returns the status of the operation, according to the LoRaMAC specification. + */ +uint8_t RegionAS923DlChannelReq( DlChannelReqParams_t* dlChannelReq ); + +/*! + * \brief Alternates the datarate of the channel for the join request. + * + * \param [IN] alternateDr Pointer to the function parameters. + * + * \retval Datarate to apply. + */ +int8_t RegionAS923AlternateDr( AlternateDrParams_t* alternateDr ); + +/*! + * \brief Calculates the back-off time. + * + * \param [IN] calcBackOff Pointer to the function parameters. + */ +void RegionAS923CalcBackOff( CalcBackOffParams_t* calcBackOff ); + +/*! + * \brief Searches and set the next random available channel + * + * \param [OUT] channel Next channel to use for TX. + * + * \param [OUT] time Time to wait for the next transmission according to the duty + * cycle. + * + * \param [OUT] aggregatedTimeOff Updates the aggregated time off. + * + * \retval Function status [1: OK, 0: Unable to find a channel on the current datarate] + */ +bool RegionAS923NextChannel( NextChanParams_t* nextChanParams, uint8_t* channel, TimerTime_t* time, TimerTime_t* aggregatedTimeOff ); + +/*! + * \brief Adds a channel. + * + * \param [IN] channelAdd Pointer to the function parameters. + * + * \retval Status of the operation. + */ +LoRaMacStatus_t RegionAS923ChannelAdd( ChannelAddParams_t* channelAdd ); + +/*! + * \brief Removes a channel. + * + * \param [IN] channelRemove Pointer to the function parameters. + * + * \retval Returns true, if the channel was removed successfully. + */ +bool RegionAS923ChannelsRemove( ChannelRemoveParams_t* channelRemove ); + +/*! + * \brief Sets the radio into continuous wave mode. + * + * \param [IN] continuousWave Pointer to the function parameters. + */ +void RegionAS923SetContinuousWave( ContinuousWaveParams_t* continuousWave ); + +/*! + * \brief Computes new datarate according to the given offset + * + * \param [IN] downlinkDwellTime Downlink dwell time configuration. 0: No limit, 1: 400ms + * + * \param [IN] dr Current datarate + * + * \param [IN] drOffset Offset to be applied + * + * \retval newDr Computed datarate. + */ +uint8_t RegionAS923ApplyDrOffset( uint8_t downlinkDwellTime, int8_t dr, int8_t drOffset ); + +/*! \} defgroup REGIONAS923 */ + +#endif // __REGION_AS923_H__ diff --git a/src/mac/region/RegionAU915.c b/src/mac/region/RegionAU915.c new file mode 100755 index 0000000..4c8fc33 --- /dev/null +++ b/src/mac/region/RegionAU915.c @@ -0,0 +1,857 @@ +/* + / _____) _ | | +( (____ _____ ____ _| |_ _____ ____| |__ + \____ \| ___ | (_ _) ___ |/ ___) _ \ + _____) ) ____| | | || |_| ____( (___| | | | +(______/|_____)_|_|_| \__)_____)\____)_| |_| + (C)2013 Semtech + ___ _____ _ ___ _ _____ ___ ___ ___ ___ +/ __|_ _/_\ / __| |/ / __/ _ \| _ \/ __| __| +\__ \ | |/ _ \ (__| ' <| _| (_) | / (__| _| +|___/ |_/_/ \_\___|_|\_\_| \___/|_|_\\___|___| +embedded.connectivity.solutions=============== + +Description: LoRa MAC region AU915 implementation + +License: Revised BSD License, see LICENSE.TXT file include in the project + +Maintainer: Miguel Luis ( Semtech ), Gregory Cristian ( Semtech ) and Daniel Jaeckle ( STACKFORCE ) +*/ +#include +#include +#include +#include + +#include "board.h" +#include "LoRaMac.h" + +#include "utilities.h" + +#include "Region.h" +#include "RegionCommon.h" +#include "RegionAU915.h" + +// Definitions +#define CHANNELS_MASK_SIZE 6 + +// Global attributes +/*! + * LoRaMAC channels + */ +static ChannelParams_t Channels[AU915_MAX_NB_CHANNELS]; + +/*! + * LoRaMac bands + */ +static Band_t Bands[AU915_MAX_NB_BANDS] = +{ + AU915_BAND0 +}; + +/*! + * LoRaMac channels mask + */ +static uint16_t ChannelsMask[CHANNELS_MASK_SIZE]; + +/*! + * LoRaMac channels remaining + */ +static uint16_t ChannelsMaskRemaining[CHANNELS_MASK_SIZE]; + +/*! + * LoRaMac channels default mask + */ +static uint16_t ChannelsDefaultMask[CHANNELS_MASK_SIZE]; + +// Static functions +static int8_t GetNextLowerTxDr( int8_t dr, int8_t minDr ) +{ + uint8_t nextLowerDr = 0; + + if( dr == minDr ) + { + nextLowerDr = minDr; + } + else + { + nextLowerDr = dr - 1; + } + return nextLowerDr; +} + +static uint32_t GetBandwidth( uint32_t drIndex ) +{ + switch( BandwidthsAU915[drIndex] ) + { + default: + case 125000: + return 0; + case 250000: + return 1; + case 500000: + return 2; + } +} + +static int8_t LimitTxPower( int8_t txPower, int8_t maxBandTxPower, int8_t datarate, uint16_t* channelsMask ) +{ + int8_t txPowerResult = txPower; + + // Limit tx power to the band max + txPowerResult = MAX( txPower, maxBandTxPower ); + + return txPowerResult; +} + +static uint8_t CountNbOfEnabledChannels( uint8_t datarate, uint16_t* channelsMask, ChannelParams_t* channels, Band_t* bands, uint8_t* enabledChannels, uint8_t* delayTx ) +{ + uint8_t nbEnabledChannels = 0; + uint8_t delayTransmission = 0; + + for( uint8_t i = 0, k = 0; i < AU915_MAX_NB_CHANNELS; i += 16, k++ ) + { + for( uint8_t j = 0; j < 16; j++ ) + { + if( ( channelsMask[k] & ( 1 << j ) ) != 0 ) + { + if( channels[i + j].Frequency == 0 ) + { // Check if the channel is enabled + continue; + } + if( RegionCommonValueInRange( datarate, channels[i + j].DrRange.Fields.Min, + channels[i + j].DrRange.Fields.Max ) == false ) + { // Check if the current channel selection supports the given datarate + continue; + } + if( bands[channels[i + j].Band].TimeOff > 0 ) + { // Check if the band is available for transmission + delayTransmission++; + continue; + } + enabledChannels[nbEnabledChannels++] = i + j; + } + } + } + + *delayTx = delayTransmission; + return nbEnabledChannels; +} + +PhyParam_t RegionAU915GetPhyParam( GetPhyParams_t* getPhy ) +{ + PhyParam_t phyParam = { 0 }; + + switch( getPhy->Attribute ) + { + case PHY_MIN_RX_DR: + { + phyParam.Value = AU915_RX_MIN_DATARATE; + break; + } + case PHY_MIN_TX_DR: + { + phyParam.Value = AU915_TX_MIN_DATARATE; + break; + } + case PHY_DEF_TX_DR: + { + phyParam.Value = AU915_DEFAULT_DATARATE; + break; + } + case PHY_NEXT_LOWER_TX_DR: + { + phyParam.Value = GetNextLowerTxDr( getPhy->Datarate, AU915_TX_MIN_DATARATE ); + break; + } + case PHY_DEF_TX_POWER: + { + phyParam.Value = AU915_DEFAULT_TX_POWER; + break; + } + case PHY_MAX_PAYLOAD: + { + phyParam.Value = MaxPayloadOfDatarateAU915[getPhy->Datarate]; + break; + } + case PHY_MAX_PAYLOAD_REPEATER: + { + phyParam.Value = MaxPayloadOfDatarateRepeaterAU915[getPhy->Datarate]; + break; + } + case PHY_DUTY_CYCLE: + { + phyParam.Value = AU915_DUTY_CYCLE_ENABLED; + break; + } + case PHY_MAX_RX_WINDOW: + { + phyParam.Value = AU915_MAX_RX_WINDOW; + break; + } + case PHY_RECEIVE_DELAY1: + { + phyParam.Value = AU915_RECEIVE_DELAY1; + break; + } + case PHY_RECEIVE_DELAY2: + { + phyParam.Value = AU915_RECEIVE_DELAY2; + break; + } + case PHY_JOIN_ACCEPT_DELAY1: + { + phyParam.Value = AU915_JOIN_ACCEPT_DELAY1; + break; + } + case PHY_JOIN_ACCEPT_DELAY2: + { + phyParam.Value = AU915_JOIN_ACCEPT_DELAY2; + break; + } + case PHY_MAX_FCNT_GAP: + { + phyParam.Value = AU915_MAX_FCNT_GAP; + break; + } + case PHY_ACK_TIMEOUT: + { + phyParam.Value = ( AU915_ACKTIMEOUT + randr( -AU915_ACK_TIMEOUT_RND, AU915_ACK_TIMEOUT_RND ) ); + break; + } + case PHY_DEF_DR1_OFFSET: + { + phyParam.Value = AU915_DEFAULT_RX1_DR_OFFSET; + break; + } + case PHY_DEF_RX2_FREQUENCY: + { + phyParam.Value = AU915_RX_WND_2_FREQ; + break; + } + case PHY_DEF_RX2_DR: + { + phyParam.Value = AU915_RX_WND_2_DR; + break; + } + case PHY_CHANNELS_MASK: + { + phyParam.ChannelsMask = ChannelsMask; + break; + } + case PHY_CHANNELS_DEFAULT_MASK: + { + phyParam.ChannelsMask = ChannelsDefaultMask; + break; + } + case PHY_MAX_NB_CHANNELS: + { + phyParam.Value = AU915_MAX_NB_CHANNELS; + break; + } + case PHY_CHANNELS: + { + phyParam.Channels = Channels; + break; + } + case PHY_DEF_UPLINK_DWELL_TIME: + case PHY_DEF_DOWNLINK_DWELL_TIME: + { + phyParam.Value = 0; + break; + } + case PHY_DEF_MAX_EIRP: + { + phyParam.fValue = AU915_DEFAULT_MAX_EIRP; + break; + } + case PHY_DEF_ANTENNA_GAIN: + { + phyParam.fValue = AU915_DEFAULT_ANTENNA_GAIN; + break; + } + case PHY_NB_JOIN_TRIALS: + case PHY_DEF_NB_JOIN_TRIALS: + { + phyParam.Value = 2; + break; + } + default: + { + break; + } + } + + return phyParam; +} + +void RegionAU915SetBandTxDone( SetBandTxDoneParams_t* txDone ) +{ + RegionCommonSetBandTxDone( txDone->Joined, &Bands[Channels[txDone->Channel].Band], txDone->LastTxDoneTime ); +} + +void RegionAU915InitDefaults( InitType_t type ) +{ + switch( type ) + { + case INIT_TYPE_INIT: + { + // Channels + // 125 kHz channels + for( uint8_t i = 0; i < AU915_MAX_NB_CHANNELS - 8; i++ ) + { + Channels[i].Frequency = 915200000 + i * 200000; + Channels[i].DrRange.Value = ( DR_5 << 4 ) | DR_0; + Channels[i].Band = 0; + } + // 500 kHz channels + for( uint8_t i = AU915_MAX_NB_CHANNELS - 8; i < AU915_MAX_NB_CHANNELS; i++ ) + { + Channels[i].Frequency = 915900000 + ( i - ( AU915_MAX_NB_CHANNELS - 8 ) ) * 1600000; + Channels[i].DrRange.Value = ( DR_6 << 4 ) | DR_6; + Channels[i].Band = 0; + } + + // Initialize channels default mask + ChannelsDefaultMask[0] = 0xFFFF; + ChannelsDefaultMask[1] = 0xFFFF; + ChannelsDefaultMask[2] = 0xFFFF; + ChannelsDefaultMask[3] = 0xFFFF; + ChannelsDefaultMask[4] = 0x00FF; + ChannelsDefaultMask[5] = 0x0000; + + // Copy channels default mask + RegionCommonChanMaskCopy( ChannelsMask, ChannelsDefaultMask, 6 ); + + // Copy into channels mask remaining + RegionCommonChanMaskCopy( ChannelsMaskRemaining, ChannelsMask, 6 ); + break; + } + case INIT_TYPE_RESTORE: + { + // Copy channels default mask + RegionCommonChanMaskCopy( ChannelsMask, ChannelsDefaultMask, 6 ); + + for( uint8_t i = 0; i < 6; i++ ) + { // Copy-And the channels mask + ChannelsMaskRemaining[i] &= ChannelsMask[i]; + } + break; + } + default: + { + break; + } + } +} + +bool RegionAU915Verify( VerifyParams_t* verify, PhyAttribute_t phyAttribute ) +{ + switch( phyAttribute ) + { + case PHY_TX_DR: + case PHY_DEF_TX_DR: + { + return RegionCommonValueInRange( verify->DatarateParams.Datarate, AU915_TX_MIN_DATARATE, AU915_TX_MAX_DATARATE ); + } + case PHY_RX_DR: + { + return RegionCommonValueInRange( verify->DatarateParams.Datarate, AU915_RX_MIN_DATARATE, AU915_RX_MAX_DATARATE ); + } + case PHY_DEF_TX_POWER: + case PHY_TX_POWER: + { + // Remark: switched min and max! + return RegionCommonValueInRange( verify->TxPower, AU915_MAX_TX_POWER, AU915_MIN_TX_POWER ); + } + case PHY_DUTY_CYCLE: + { + return AU915_DUTY_CYCLE_ENABLED; + } + case PHY_NB_JOIN_TRIALS: + { + if( verify->NbJoinTrials < 2 ) + { + return false; + } + break; + } + default: + return false; + } + return true; +} + +void RegionAU915ApplyCFList( ApplyCFListParams_t* applyCFList ) +{ + return; +} + +bool RegionAU915ChanMaskSet( ChanMaskSetParams_t* chanMaskSet ) +{ + uint8_t nbChannels = RegionCommonCountChannels( chanMaskSet->ChannelsMaskIn, 0, 4 ); + + // Check the number of active channels + // According to ACMA regulation, we require at least 20 125KHz channels, if + // the node shall utilize 125KHz channels. + if( ( nbChannels < 20 ) && + ( nbChannels > 0 ) ) + { + return false; + } + + switch( chanMaskSet->ChannelsMaskType ) + { + case CHANNELS_MASK: + { + RegionCommonChanMaskCopy( ChannelsMask, chanMaskSet->ChannelsMaskIn, 6 ); + + for( uint8_t i = 0; i < 6; i++ ) + { // Copy-And the channels mask + ChannelsMaskRemaining[i] &= ChannelsMask[i]; + } + break; + } + case CHANNELS_DEFAULT_MASK: + { + RegionCommonChanMaskCopy( ChannelsDefaultMask, chanMaskSet->ChannelsMaskIn, 6 ); + break; + } + default: + return false; + } + return true; +} + +bool RegionAU915AdrNext( AdrNextParams_t* adrNext, int8_t* drOut, int8_t* txPowOut, uint32_t* adrAckCounter ) +{ + bool adrAckReq = false; + int8_t datarate = adrNext->Datarate; + int8_t txPower = adrNext->TxPower; + GetPhyParams_t getPhy; + PhyParam_t phyParam; + + // Report back the adr ack counter + *adrAckCounter = adrNext->AdrAckCounter; + + if( adrNext->AdrEnabled == true ) + { + if( datarate == AU915_TX_MIN_DATARATE ) + { + *adrAckCounter = 0; + adrAckReq = false; + } + else + { + if( adrNext->AdrAckCounter >= AU915_ADR_ACK_LIMIT ) + { + adrAckReq = true; + txPower = AU915_MAX_TX_POWER; + } + else + { + adrAckReq = false; + } + if( adrNext->AdrAckCounter >= ( AU915_ADR_ACK_LIMIT + AU915_ADR_ACK_DELAY ) ) + { + if( ( adrNext->AdrAckCounter % AU915_ADR_ACK_DELAY ) == 1 ) + { + // Decrease the datarate + getPhy.Attribute = PHY_NEXT_LOWER_TX_DR; + getPhy.Datarate = datarate; + getPhy.UplinkDwellTime = adrNext->UplinkDwellTime; + phyParam = RegionAU915GetPhyParam( &getPhy ); + datarate = phyParam.Value; + + if( datarate == AU915_TX_MIN_DATARATE ) + { + // We must set adrAckReq to false as soon as we reach the lowest datarate + adrAckReq = false; + if( adrNext->UpdateChanMask == true ) + { + // Re-enable default channels + ChannelsMask[0] = 0xFFFF; + ChannelsMask[1] = 0xFFFF; + ChannelsMask[2] = 0xFFFF; + ChannelsMask[3] = 0xFFFF; + ChannelsMask[4] = 0x00FF; + ChannelsMask[5] = 0x0000; + } + } + } + } + } + } + + *drOut = datarate; + *txPowOut = txPower; + return adrAckReq; +} + +void RegionAU915ComputeRxWindowParameters( int8_t datarate, uint8_t minRxSymbols, uint32_t rxError, RxConfigParams_t *rxConfigParams ) +{ + double tSymbol = 0.0; + + // Get the datarate, perform a boundary check + rxConfigParams->Datarate = MIN( datarate, AU915_RX_MAX_DATARATE ); + rxConfigParams->Bandwidth = GetBandwidth( rxConfigParams->Datarate ); + + tSymbol = RegionCommonComputeSymbolTimeLoRa( DataratesAU915[rxConfigParams->Datarate], BandwidthsAU915[rxConfigParams->Datarate] ); + + RegionCommonComputeRxWindowParameters( tSymbol, minRxSymbols, rxError, RADIO_WAKEUP_TIME, &rxConfigParams->WindowTimeout, &rxConfigParams->WindowOffset ); +} + +bool RegionAU915RxConfig( RxConfigParams_t* rxConfig, int8_t* datarate ) +{ + int8_t dr = rxConfig->Datarate; + uint8_t maxPayload = 0; + int8_t phyDr = 0; + uint32_t frequency = rxConfig->Frequency; + + if( Radio.GetStatus( ) != RF_IDLE ) + { + return false; + } + + if( rxConfig->Window == 0 ) + { + // Apply window 1 frequency + frequency = AU915_FIRST_RX1_CHANNEL + ( rxConfig->Channel % 8 ) * AU915_STEPWIDTH_RX1_CHANNEL; + } + + // Read the physical datarate from the datarates table + phyDr = DataratesAU915[dr]; + + Radio.SetChannel( frequency ); + + // Radio configuration + Radio.SetRxConfig( MODEM_LORA, rxConfig->Bandwidth, phyDr, 1, 0, 8, rxConfig->WindowTimeout, false, 0, false, 0, 0, true, rxConfig->RxContinuous ); + + if( rxConfig->RepeaterSupport == true ) + { + maxPayload = MaxPayloadOfDatarateRepeaterAU915[dr]; + } + else + { + maxPayload = MaxPayloadOfDatarateAU915[dr]; + } + Radio.SetMaxPayloadLength( MODEM_LORA, maxPayload + LORA_MAC_FRMPAYLOAD_OVERHEAD ); + + *datarate = (uint8_t) dr; + return true; +} + +bool RegionAU915TxConfig( TxConfigParams_t* txConfig, int8_t* txPower, TimerTime_t* txTimeOnAir ) +{ + int8_t phyDr = DataratesAU915[txConfig->Datarate]; + int8_t txPowerLimited = LimitTxPower( txConfig->TxPower, Bands[Channels[txConfig->Channel].Band].TxMaxPower, txConfig->Datarate, ChannelsMask ); + uint32_t bandwidth = GetBandwidth( txConfig->Datarate ); + int8_t phyTxPower = 0; + + // Calculate physical TX power + phyTxPower = RegionCommonComputeTxPower( txPowerLimited, txConfig->MaxEirp, txConfig->AntennaGain ); + + // Setup the radio frequency + Radio.SetChannel( Channels[txConfig->Channel].Frequency ); + + Radio.SetTxConfig( MODEM_LORA, phyTxPower, 0, bandwidth, phyDr, 1, 8, false, true, 0, 0, false, 3000 ); + + // Setup maximum payload lenght of the radio driver + Radio.SetMaxPayloadLength( MODEM_LORA, txConfig->PktLen ); + + *txTimeOnAir = Radio.TimeOnAir( MODEM_LORA, txConfig->PktLen ); + *txPower = txPowerLimited; + + return true; +} + +uint8_t RegionAU915LinkAdrReq( LinkAdrReqParams_t* linkAdrReq, int8_t* drOut, int8_t* txPowOut, uint8_t* nbRepOut, uint8_t* nbBytesParsed ) +{ + uint8_t status = 0x07; + RegionCommonLinkAdrParams_t linkAdrParams; + uint8_t nextIndex = 0; + uint8_t bytesProcessed = 0; + uint16_t channelsMask[6] = { 0, 0, 0, 0, 0, 0 }; + GetPhyParams_t getPhy; + PhyParam_t phyParam; + RegionCommonLinkAdrReqVerifyParams_t linkAdrVerifyParams; + + // Initialize local copy of channels mask + RegionCommonChanMaskCopy( channelsMask, ChannelsMask, 6 ); + + while( bytesProcessed < linkAdrReq->PayloadSize ) + { + nextIndex = RegionCommonParseLinkAdrReq( &( linkAdrReq->Payload[bytesProcessed] ), &linkAdrParams ); + + if( nextIndex == 0 ) + break; // break loop, since no more request has been found + + // Update bytes processed + bytesProcessed += nextIndex; + + // Revert status, as we only check the last ADR request for the channel mask KO + status = 0x07; + + if( linkAdrParams.ChMaskCtrl == 6 ) + { + // Enable all 125 kHz channels + channelsMask[0] = 0xFFFF; + channelsMask[1] = 0xFFFF; + channelsMask[2] = 0xFFFF; + channelsMask[3] = 0xFFFF; + // Apply chMask to channels 64 to 71 + channelsMask[4] = linkAdrParams.ChMask; + } + else if( linkAdrParams.ChMaskCtrl == 7 ) + { + // Disable all 125 kHz channels + channelsMask[0] = 0x0000; + channelsMask[1] = 0x0000; + channelsMask[2] = 0x0000; + channelsMask[3] = 0x0000; + // Apply chMask to channels 64 to 71 + channelsMask[4] = linkAdrParams.ChMask; + } + else if( linkAdrParams.ChMaskCtrl == 5 ) + { + // RFU + status &= 0xFE; // Channel mask KO + } + else + { + channelsMask[linkAdrParams.ChMaskCtrl] = linkAdrParams.ChMask; + } + } + + // FCC 15.247 paragraph F mandates to hop on at least 2 125 kHz channels + if( ( linkAdrParams.Datarate < DR_6 ) && ( RegionCommonCountChannels( channelsMask, 0, 4 ) < 2 ) ) + { + status &= 0xFE; // Channel mask KO + } + + // Get the minimum possible datarate + getPhy.Attribute = PHY_MIN_TX_DR; + getPhy.UplinkDwellTime = linkAdrReq->UplinkDwellTime; + phyParam = RegionAU915GetPhyParam( &getPhy ); + + linkAdrVerifyParams.Status = status; + linkAdrVerifyParams.AdrEnabled = linkAdrReq->AdrEnabled; + linkAdrVerifyParams.Datarate = linkAdrParams.Datarate; + linkAdrVerifyParams.TxPower = linkAdrParams.TxPower; + linkAdrVerifyParams.NbRep = linkAdrParams.NbRep; + linkAdrVerifyParams.CurrentDatarate = linkAdrReq->CurrentDatarate; + linkAdrVerifyParams.CurrentTxPower = linkAdrReq->CurrentTxPower; + linkAdrVerifyParams.CurrentNbRep = linkAdrReq->CurrentNbRep; + linkAdrVerifyParams.NbChannels = AU915_MAX_NB_CHANNELS; + linkAdrVerifyParams.ChannelsMask = channelsMask; + linkAdrVerifyParams.MinDatarate = ( int8_t )phyParam.Value; + linkAdrVerifyParams.MaxDatarate = AU915_TX_MAX_DATARATE; + linkAdrVerifyParams.Channels = Channels; + linkAdrVerifyParams.MinTxPower = AU915_MIN_TX_POWER; + linkAdrVerifyParams.MaxTxPower = AU915_MAX_TX_POWER; + + // Verify the parameters and update, if necessary + status = RegionCommonLinkAdrReqVerifyParams( &linkAdrVerifyParams, &linkAdrParams.Datarate, &linkAdrParams.TxPower, &linkAdrParams.NbRep ); + + // Update channelsMask if everything is correct + if( status == 0x07 ) + { + // Copy Mask + RegionCommonChanMaskCopy( ChannelsMask, channelsMask, 6 ); + + ChannelsMaskRemaining[0] &= ChannelsMask[0]; + ChannelsMaskRemaining[1] &= ChannelsMask[1]; + ChannelsMaskRemaining[2] &= ChannelsMask[2]; + ChannelsMaskRemaining[3] &= ChannelsMask[3]; + ChannelsMaskRemaining[4] = ChannelsMask[4]; + ChannelsMaskRemaining[5] = ChannelsMask[5]; + } + + // Update status variables + *drOut = linkAdrParams.Datarate; + *txPowOut = linkAdrParams.TxPower; + *nbRepOut = linkAdrParams.NbRep; + *nbBytesParsed = bytesProcessed; + + return status; +} + +uint8_t RegionAU915RxParamSetupReq( RxParamSetupReqParams_t* rxParamSetupReq ) +{ + uint8_t status = 0x07; + uint32_t freq = rxParamSetupReq->Frequency; + + // Verify radio frequency + if( ( Radio.CheckRfFrequency( freq ) == false ) || + ( freq < AU915_FIRST_RX1_CHANNEL ) || + ( freq > AU915_LAST_RX1_CHANNEL ) || + ( ( ( freq - ( uint32_t ) AU915_FIRST_RX1_CHANNEL ) % ( uint32_t ) AU915_STEPWIDTH_RX1_CHANNEL ) != 0 ) ) + { + status &= 0xFE; // Channel frequency KO + } + + // Verify datarate + if( RegionCommonValueInRange( rxParamSetupReq->Datarate, AU915_RX_MIN_DATARATE, AU915_RX_MAX_DATARATE ) == false ) + { + status &= 0xFD; // Datarate KO + } + if( ( rxParamSetupReq->Datarate == DR_7 ) || + ( rxParamSetupReq->Datarate > DR_13 ) ) + { + status &= 0xFD; // Datarate KO + } + + // Verify datarate offset + if( RegionCommonValueInRange( rxParamSetupReq->DrOffset, AU915_MIN_RX1_DR_OFFSET, AU915_MAX_RX1_DR_OFFSET ) == false ) + { + status &= 0xFB; // Rx1DrOffset range KO + } + + return status; +} + +uint8_t RegionAU915NewChannelReq( NewChannelReqParams_t* newChannelReq ) +{ + // Datarate and frequency KO + return 0; +} + +int8_t RegionAU915TxParamSetupReq( TxParamSetupReqParams_t* txParamSetupReq ) +{ + return -1; +} + +uint8_t RegionAU915DlChannelReq( DlChannelReqParams_t* dlChannelReq ) +{ + return 0; +} + +int8_t RegionAU915AlternateDr( AlternateDrParams_t* alternateDr ) +{ + int8_t datarate = 0; + + // Re-enable 500 kHz default channels + ChannelsMask[4] = 0x00FF; + + if( ( alternateDr->NbTrials & 0x01 ) == 0x01 ) + { + datarate = DR_6; + } + else + { + datarate = DR_0; + } + return datarate; +} + +void RegionAU915CalcBackOff( CalcBackOffParams_t* calcBackOff ) +{ + RegionCommonCalcBackOffParams_t calcBackOffParams; + + calcBackOffParams.Channels = Channels; + calcBackOffParams.Bands = Bands; + calcBackOffParams.LastTxIsJoinRequest = calcBackOff->LastTxIsJoinRequest; + calcBackOffParams.Joined = calcBackOff->Joined; + calcBackOffParams.DutyCycleEnabled = calcBackOff->DutyCycleEnabled; + calcBackOffParams.Channel = calcBackOff->Channel; + calcBackOffParams.ElapsedTime = calcBackOff->ElapsedTime; + calcBackOffParams.TxTimeOnAir = calcBackOff->TxTimeOnAir; + + RegionCommonCalcBackOff( &calcBackOffParams ); +} + +bool RegionAU915NextChannel( NextChanParams_t* nextChanParams, uint8_t* channel, TimerTime_t* time, TimerTime_t* aggregatedTimeOff ) +{ + uint8_t nbEnabledChannels = 0; + uint8_t delayTx = 0; + uint8_t enabledChannels[AU915_MAX_NB_CHANNELS] = { 0 }; + TimerTime_t nextTxDelay = 0; + + // Count 125kHz channels + if( RegionCommonCountChannels( ChannelsMaskRemaining, 0, 4 ) == 0 ) + { // Reactivate default channels + RegionCommonChanMaskCopy( ChannelsMaskRemaining, ChannelsMask, 4 ); + } + // Check other channels + if( nextChanParams->Datarate >= DR_6 ) + { + if( ( ChannelsMaskRemaining[4] & 0x00FF ) == 0 ) + { + ChannelsMaskRemaining[4] = ChannelsMask[4]; + } + } + + if( nextChanParams->AggrTimeOff <= TimerGetElapsedTime( nextChanParams->LastAggrTx ) ) + { + // Reset Aggregated time off + *aggregatedTimeOff = 0; + + // Update bands Time OFF + nextTxDelay = RegionCommonUpdateBandTimeOff( nextChanParams->Joined, nextChanParams->DutyCycleEnabled, Bands, AU915_MAX_NB_BANDS ); + + // Search how many channels are enabled + nbEnabledChannels = CountNbOfEnabledChannels( nextChanParams->Datarate, + ChannelsMaskRemaining, Channels, + Bands, enabledChannels, &delayTx ); + } + else + { + delayTx++; + nextTxDelay = nextChanParams->AggrTimeOff - TimerGetElapsedTime( nextChanParams->LastAggrTx ); + } + + if( nbEnabledChannels > 0 ) + { + // We found a valid channel + *channel = enabledChannels[randr( 0, nbEnabledChannels - 1 )]; + // Disable the channel in the mask + RegionCommonChanDisable( ChannelsMaskRemaining, *channel, AU915_MAX_NB_CHANNELS - 8 ); + + *time = 0; + return true; + } + else + { + if( delayTx > 0 ) + { + // Delay transmission due to AggregatedTimeOff or to a band time off + *time = nextTxDelay; + return true; + } + // Datarate not supported by any channel + *time = 0; + return false; + } +} + +LoRaMacStatus_t RegionAU915ChannelAdd( ChannelAddParams_t* channelAdd ) +{ + return LORAMAC_STATUS_PARAMETER_INVALID; +} + +bool RegionAU915ChannelsRemove( ChannelRemoveParams_t* channelRemove ) +{ + return LORAMAC_STATUS_PARAMETER_INVALID; +} + +void RegionAU915SetContinuousWave( ContinuousWaveParams_t* continuousWave ) +{ + int8_t txPowerLimited = LimitTxPower( continuousWave->TxPower, Bands[Channels[continuousWave->Channel].Band].TxMaxPower, continuousWave->Datarate, ChannelsMask ); + int8_t phyTxPower = 0; + uint32_t frequency = Channels[continuousWave->Channel].Frequency; + + // Calculate physical TX power + phyTxPower = RegionCommonComputeTxPower( txPowerLimited, continuousWave->MaxEirp, continuousWave->AntennaGain ); + + Radio.SetTxContinuousWave( frequency, phyTxPower, continuousWave->Timeout ); +} + +uint8_t RegionAU915ApplyDrOffset( uint8_t downlinkDwellTime, int8_t dr, int8_t drOffset ) +{ + int8_t datarate = DatarateOffsetsAU915[dr][drOffset]; + + if( datarate < 0 ) + { + datarate = DR_0; + } + return datarate; +} diff --git a/src/mac/region/RegionAU915.h b/src/mac/region/RegionAU915.h new file mode 100755 index 0000000..b28dadc --- /dev/null +++ b/src/mac/region/RegionAU915.h @@ -0,0 +1,455 @@ +/*! + * \file RegionAU915.h + * + * \brief Region definition for AU915 + * + * \copyright Revised BSD License, see section \ref LICENSE. + * + * \code + * ______ _ + * / _____) _ | | + * ( (____ _____ ____ _| |_ _____ ____| |__ + * \____ \| ___ | (_ _) ___ |/ ___) _ \ + * _____) ) ____| | | || |_| ____( (___| | | | + * (______/|_____)_|_|_| \__)_____)\____)_| |_| + * (C)2013 Semtech + * + * ___ _____ _ ___ _ _____ ___ ___ ___ ___ + * / __|_ _/_\ / __| |/ / __/ _ \| _ \/ __| __| + * \__ \ | |/ _ \ (__| ' <| _| (_) | / (__| _| + * |___/ |_/_/ \_\___|_|\_\_| \___/|_|_\\___|___| + * embedded.connectivity.solutions=============== + * + * \endcode + * + * \author Miguel Luis ( Semtech ) + * + * \author Gregory Cristian ( Semtech ) + * + * \author Daniel Jaeckle ( STACKFORCE ) + * + * \defgroup REGIONAU915 Region AU915 + * Implementation according to LoRaWAN Specification v1.0.2. + * \{ + */ +#ifndef __REGION_AU915_H__ +#define __REGION_AU915_H__ + +/*! + * LoRaMac maximum number of channels + */ +#define AU915_MAX_NB_CHANNELS 72 + +/*! + * Minimal datarate that can be used by the node + */ +#define AU915_TX_MIN_DATARATE DR_0 + +/*! + * Maximal datarate that can be used by the node + */ +#define AU915_TX_MAX_DATARATE DR_6 + +/*! + * Minimal datarate that can be used by the node + */ +#define AU915_RX_MIN_DATARATE DR_8 + +/*! + * Maximal datarate that can be used by the node + */ +#define AU915_RX_MAX_DATARATE DR_13 + +/*! + * Default datarate used by the node + */ +#define AU915_DEFAULT_DATARATE DR_0 + +/*! + * Minimal Rx1 receive datarate offset + */ +#define AU915_MIN_RX1_DR_OFFSET 0 + +/*! + * Maximal Rx1 receive datarate offset + */ +#define AU915_MAX_RX1_DR_OFFSET 6 + +/*! + * Default Rx1 receive datarate offset + */ +#define AU915_DEFAULT_RX1_DR_OFFSET 0 + +/*! + * Minimal Tx output power that can be used by the node + */ +#define AU915_MIN_TX_POWER TX_POWER_10 + +/*! + * Maximal Tx output power that can be used by the node + */ +#define AU915_MAX_TX_POWER TX_POWER_0 + +/*! + * Default Tx output power used by the node + */ +#define AU915_DEFAULT_TX_POWER TX_POWER_0 + +/*! + * Default Max EIRP + */ +#define AU915_DEFAULT_MAX_EIRP 30.0f + +/*! + * Default antenna gain + */ +#define AU915_DEFAULT_ANTENNA_GAIN 2.15f + +/*! + * ADR Ack limit + */ +#define AU915_ADR_ACK_LIMIT 64 + +/*! + * ADR Ack delay + */ +#define AU915_ADR_ACK_DELAY 32 + +/*! + * Enabled or disabled the duty cycle + */ +#define AU915_DUTY_CYCLE_ENABLED 0 + +/*! + * Maximum RX window duration + */ +#define AU915_MAX_RX_WINDOW 3000 + +/*! + * Receive delay 1 + */ +#define AU915_RECEIVE_DELAY1 1000 + +/*! + * Receive delay 2 + */ +#define AU915_RECEIVE_DELAY2 2000 + +/*! + * Join accept delay 1 + */ +#define AU915_JOIN_ACCEPT_DELAY1 5000 + +/*! + * Join accept delay 2 + */ +#define AU915_JOIN_ACCEPT_DELAY2 6000 + +/*! + * Maximum frame counter gap + */ +#define AU915_MAX_FCNT_GAP 16384 + +/*! + * Ack timeout + */ +#define AU915_ACKTIMEOUT 2000 + +/*! + * Random ack timeout limits + */ +#define AU915_ACK_TIMEOUT_RND 1000 + +/*! + * Second reception window channel frequency definition. + */ +#define AU915_RX_WND_2_FREQ 923300000 + +/*! + * Second reception window channel datarate definition. + */ +#define AU915_RX_WND_2_DR DR_8 + +/*! + * LoRaMac maximum number of bands + */ +#define AU915_MAX_NB_BANDS 1 + +/*! + * Band 0 definition + * { DutyCycle, TxMaxPower, LastTxDoneTime, TimeOff } + */ +#define AU915_BAND0 { 1, AU915_MAX_TX_POWER, 0, 0 } // 100.0 % + +/*! + * Defines the first channel for RX window 1 for US band + */ +#define AU915_FIRST_RX1_CHANNEL ( (uint32_t) 923300000 ) + +/*! + * Defines the last channel for RX window 1 for US band + */ +#define AU915_LAST_RX1_CHANNEL ( (uint32_t) 927500000 ) + +/*! + * Defines the step width of the channels for RX window 1 + */ +#define AU915_STEPWIDTH_RX1_CHANNEL ( (uint32_t) 600000 ) + +/*! + * Data rates table definition + */ +static const uint8_t DataratesAU915[] = { 12, 11, 10, 9, 8, 7, 8, 0, 12, 11, 10, 9, 8, 7, 0, 0 }; + +/*! + * Bandwidths table definition in Hz + */ +static const uint32_t BandwidthsAU915[] = { 125000, 125000, 125000, 125000, 125000, 125000, 500000, 0, 500000, 500000, 500000, 500000, 500000, 500000, 0, 0 }; + +/*! + * Up/Down link data rates offset definition + */ +static const int8_t DatarateOffsetsAU915[7][6] = +{ + { DR_8 , DR_8 , DR_8 , DR_8 , DR_8 , DR_8 }, // DR_0 + { DR_9 , DR_8 , DR_8 , DR_8 , DR_8 , DR_8 }, // DR_1 + { DR_10, DR_9 , DR_8 , DR_8 , DR_8 , DR_8 }, // DR_2 + { DR_11, DR_10, DR_9 , DR_8 , DR_8 , DR_8 }, // DR_3 + { DR_12, DR_11, DR_10, DR_9 , DR_8 , DR_8 }, // DR_4 + { DR_13, DR_12, DR_11, DR_10, DR_9 , DR_8 }, // DR_5 + { DR_13, DR_13, DR_12, DR_11, DR_10, DR_9 }, // DR_6 +}; + +/*! + * Maximum payload with respect to the datarate index. Cannot operate with repeater. + */ +static const uint8_t MaxPayloadOfDatarateAU915[] = { 51, 51, 51, 115, 242, 242, 242, 0, 53, 129, 242, 242, 242, 242, 0, 0 }; + +/*! + * Maximum payload with respect to the datarate index. Can operate with repeater. + */ +static const uint8_t MaxPayloadOfDatarateRepeaterAU915[] = { 51, 51, 51, 115, 222, 222, 222, 0, 33, 109, 222, 222, 222, 222, 0, 0 }; + +/*! + * \brief The function gets a value of a specific phy attribute. + * + * \param [IN] getPhy Pointer to the function parameters. + * + * \retval Returns a structure containing the PHY parameter. + */ +PhyParam_t RegionAU915GetPhyParam( GetPhyParams_t* getPhy ); + +/*! + * \brief Updates the last TX done parameters of the current channel. + * + * \param [IN] txDone Pointer to the function parameters. + */ +void RegionAU915SetBandTxDone( SetBandTxDoneParams_t* txDone ); + +/*! + * \brief Initializes the channels masks and the channels. + * + * \param [IN] type Sets the initialization type. + */ +void RegionAU915InitDefaults( InitType_t type ); + +/*! + * \brief Verifies a parameter. + * + * \param [IN] verify Pointer to the function parameters. + * + * \param [IN] type Sets the initialization type. + * + * \retval Returns true, if the parameter is valid. + */ +bool RegionAU915Verify( VerifyParams_t* verify, PhyAttribute_t phyAttribute ); + +/*! + * \brief The function parses the input buffer and sets up the channels of the + * CF list. + * + * \param [IN] applyCFList Pointer to the function parameters. + */ +void RegionAU915ApplyCFList( ApplyCFListParams_t* applyCFList ); + +/*! + * \brief Sets a channels mask. + * + * \param [IN] chanMaskSet Pointer to the function parameters. + * + * \retval Returns true, if the channels mask could be set. + */ +bool RegionAU915ChanMaskSet( ChanMaskSetParams_t* chanMaskSet ); + +/*! + * \brief Calculates the next datarate to set, when ADR is on or off. + * + * \param [IN] adrNext Pointer to the function parameters. + * + * \param [OUT] drOut The calculated datarate for the next TX. + * + * \param [OUT] txPowOut The TX power for the next TX. + * + * \param [OUT] adrAckCounter The calculated ADR acknowledgement counter. + * + * \retval Returns true, if an ADR request should be performed. + */ +bool RegionAU915AdrNext( AdrNextParams_t* adrNext, int8_t* drOut, int8_t* txPowOut, uint32_t* adrAckCounter ); + +/*! + * Computes the Rx window timeout and offset. + * + * \param [IN] datarate Rx window datarate index to be used + * + * \param [IN] minRxSymbols Minimum required number of symbols to detect an Rx frame. + * + * \param [IN] rxError System maximum timing error of the receiver. In milliseconds + * The receiver will turn on in a [-rxError : +rxError] ms + * interval around RxOffset + * + * \param [OUT]rxConfigParams Returns updated WindowTimeout and WindowOffset fields. + */ +void RegionAU915ComputeRxWindowParameters( int8_t datarate, uint8_t minRxSymbols, uint32_t rxError, RxConfigParams_t *rxConfigParams ); + +/*! + * \brief Configuration of the RX windows. + * + * \param [IN] rxConfig Pointer to the function parameters. + * + * \param [OUT] datarate The datarate index which was set. + * + * \retval Returns true, if the configuration was applied successfully. + */ +bool RegionAU915RxConfig( RxConfigParams_t* rxConfig, int8_t* datarate ); + +/*! + * \brief TX configuration. + * + * \param [IN] txConfig Pointer to the function parameters. + * + * \param [OUT] txPower The tx power index which was set. + * + * \param [OUT] txTimeOnAir The time-on-air of the frame. + * + * \retval Returns true, if the configuration was applied successfully. + */ +bool RegionAU915TxConfig( TxConfigParams_t* txConfig, int8_t* txPower, TimerTime_t* txTimeOnAir ); + +/*! + * \brief The function processes a Link ADR Request. + * + * \param [IN] linkAdrReq Pointer to the function parameters. + * + * \retval Returns the status of the operation, according to the LoRaMAC specification. + */ +uint8_t RegionAU915LinkAdrReq( LinkAdrReqParams_t* linkAdrReq, int8_t* drOut, int8_t* txPowOut, uint8_t* nbRepOut, uint8_t* nbBytesParsed ); + +/*! + * \brief The function processes a RX Parameter Setup Request. + * + * \param [IN] rxParamSetupReq Pointer to the function parameters. + * + * \retval Returns the status of the operation, according to the LoRaMAC specification. + */ +uint8_t RegionAU915RxParamSetupReq( RxParamSetupReqParams_t* rxParamSetupReq ); + +/*! + * \brief The function processes a Channel Request. + * + * \param [IN] newChannelReq Pointer to the function parameters. + * + * \retval Returns the status of the operation, according to the LoRaMAC specification. + */ +uint8_t RegionAU915NewChannelReq( NewChannelReqParams_t* newChannelReq ); + +/*! + * \brief The function processes a TX ParamSetup Request. + * + * \param [IN] txParamSetupReq Pointer to the function parameters. + * + * \retval Returns the status of the operation, according to the LoRaMAC specification. + * Returns -1, if the functionality is not implemented. In this case, the end node + * shall not process the command. + */ +int8_t RegionAU915TxParamSetupReq( TxParamSetupReqParams_t* txParamSetupReq ); + +/*! + * \brief The function processes a DlChannel Request. + * + * \param [IN] dlChannelReq Pointer to the function parameters. + * + * \retval Returns the status of the operation, according to the LoRaMAC specification. + */ +uint8_t RegionAU915DlChannelReq( DlChannelReqParams_t* dlChannelReq ); + +/*! + * \brief Alternates the datarate of the channel for the join request. + * + * \param [IN] alternateDr Pointer to the function parameters. + * + * \retval Datarate to apply. + */ +int8_t RegionAU915AlternateDr( AlternateDrParams_t* alternateDr ); + +/*! + * \brief Calculates the back-off time. + * + * \param [IN] calcBackOff Pointer to the function parameters. + */ +void RegionAU915CalcBackOff( CalcBackOffParams_t* calcBackOff ); + +/*! + * \brief Searches and set the next random available channel + * + * \param [OUT] channel Next channel to use for TX. + * + * \param [OUT] time Time to wait for the next transmission according to the duty + * cycle. + * + * \param [OUT] aggregatedTimeOff Updates the aggregated time off. + * + * \retval Function status [1: OK, 0: Unable to find a channel on the current datarate] + */ +bool RegionAU915NextChannel( NextChanParams_t* nextChanParams, uint8_t* channel, TimerTime_t* time, TimerTime_t* aggregatedTimeOff ); + +/*! + * \brief Adds a channel. + * + * \param [IN] channelAdd Pointer to the function parameters. + * + * \retval Status of the operation. + */ +LoRaMacStatus_t RegionAU915ChannelAdd( ChannelAddParams_t* channelAdd ); + +/*! + * \brief Removes a channel. + * + * \param [IN] channelRemove Pointer to the function parameters. + * + * \retval Returns true, if the channel was removed successfully. + */ +bool RegionAU915ChannelsRemove( ChannelRemoveParams_t* channelRemove ); + +/*! + * \brief Sets the radio into continuous wave mode. + * + * \param [IN] continuousWave Pointer to the function parameters. + */ +void RegionAU915SetContinuousWave( ContinuousWaveParams_t* continuousWave ); + +/*! + * \brief Computes new datarate according to the given offset + * + * \param [IN] downlinkDwellTime Downlink dwell time configuration. 0: No limit, 1: 400ms + * + * \param [IN] dr Current datarate + * + * \param [IN] drOffset Offset to be applied + * + * \retval newDr Computed datarate. + */ +uint8_t RegionAU915ApplyDrOffset( uint8_t downlinkDwellTime, int8_t dr, int8_t drOffset ); + +/*! \} defgroup REGIONAU915 */ + +#endif // __REGION_AU915_H__ diff --git a/src/mac/region/RegionCN470.c b/src/mac/region/RegionCN470.c new file mode 100755 index 0000000..dbbc745 --- /dev/null +++ b/src/mac/region/RegionCN470.c @@ -0,0 +1,807 @@ +/* + / _____) _ | | +( (____ _____ ____ _| |_ _____ ____| |__ + \____ \| ___ | (_ _) ___ |/ ___) _ \ + _____) ) ____| | | || |_| ____( (___| | | | +(______/|_____)_|_|_| \__)_____)\____)_| |_| + (C)2013 Semtech + ___ _____ _ ___ _ _____ ___ ___ ___ ___ +/ __|_ _/_\ / __| |/ / __/ _ \| _ \/ __| __| +\__ \ | |/ _ \ (__| ' <| _| (_) | / (__| _| +|___/ |_/_/ \_\___|_|\_\_| \___/|_|_\\___|___| +embedded.connectivity.solutions=============== + +Description: LoRa MAC region CN470 implementation + +License: Revised BSD License, see LICENSE.TXT file include in the project + +Maintainer: Miguel Luis ( Semtech ), Gregory Cristian ( Semtech ) and Daniel Jaeckle ( STACKFORCE ) +*/ +#include +#include +#include +#include + +#include "board.h" +#include "LoRaMac.h" + +#include "utilities.h" + +#include "Region.h" +#include "RegionCommon.h" +#include "RegionCN470.h" + +// Definitions +#define CHANNELS_MASK_SIZE 6 + +// Global attributes +/*! + * LoRaMAC channels + */ +static ChannelParams_t Channels[CN470_MAX_NB_CHANNELS]; + +/*! + * LoRaMac bands + */ +static Band_t Bands[CN470_MAX_NB_BANDS] = +{ + CN470_BAND0 +}; + +/*! + * LoRaMac channels mask + */ +static uint16_t ChannelsMask[CHANNELS_MASK_SIZE]; + +/*! + * LoRaMac channels default mask + */ +static uint16_t ChannelsDefaultMask[CHANNELS_MASK_SIZE]; + +// Static functions +static int8_t GetNextLowerTxDr( int8_t dr, int8_t minDr ) +{ + uint8_t nextLowerDr = 0; + + if( dr == minDr ) + { + nextLowerDr = minDr; + } + else + { + nextLowerDr = dr - 1; + } + return nextLowerDr; +} + +static uint32_t GetBandwidth( uint32_t drIndex ) +{ + switch( BandwidthsCN470[drIndex] ) + { + default: + case 125000: + return 0; + case 250000: + return 1; + case 500000: + return 2; + } +} + +static int8_t LimitTxPower( int8_t txPower, int8_t maxBandTxPower, int8_t datarate, uint16_t* channelsMask ) +{ + int8_t txPowerResult = txPower; + + // Limit tx power to the band max + txPowerResult = MAX( txPower, maxBandTxPower ); + + return txPowerResult; +} + +static uint8_t CountNbOfEnabledChannels( uint8_t datarate, uint16_t* channelsMask, ChannelParams_t* channels, Band_t* bands, uint8_t* enabledChannels, uint8_t* delayTx ) +{ + uint8_t nbEnabledChannels = 0; + uint8_t delayTransmission = 0; + + for( uint8_t i = 0, k = 0; i < CN470_MAX_NB_CHANNELS; i += 16, k++ ) + { + for( uint8_t j = 0; j < 16; j++ ) + { + if( ( channelsMask[k] & ( 1 << j ) ) != 0 ) + { + if( channels[i + j].Frequency == 0 ) + { // Check if the channel is enabled + continue; + } + if( RegionCommonValueInRange( datarate, channels[i + j].DrRange.Fields.Min, + channels[i + j].DrRange.Fields.Max ) == false ) + { // Check if the current channel selection supports the given datarate + continue; + } + if( bands[channels[i + j].Band].TimeOff > 0 ) + { // Check if the band is available for transmission + delayTransmission++; + continue; + } + enabledChannels[nbEnabledChannels++] = i + j; + } + } + } + + *delayTx = delayTransmission; + return nbEnabledChannels; +} + +PhyParam_t RegionCN470GetPhyParam( GetPhyParams_t* getPhy ) +{ + PhyParam_t phyParam = { 0 }; + + switch( getPhy->Attribute ) + { + case PHY_MIN_RX_DR: + { + phyParam.Value = CN470_RX_MIN_DATARATE; + break; + } + case PHY_MIN_TX_DR: + { + phyParam.Value = CN470_TX_MIN_DATARATE; + break; + } + case PHY_DEF_TX_DR: + { + phyParam.Value = CN470_DEFAULT_DATARATE; + break; + } + case PHY_NEXT_LOWER_TX_DR: + { + phyParam.Value = GetNextLowerTxDr( getPhy->Datarate, CN470_TX_MIN_DATARATE ); + break; + } + case PHY_DEF_TX_POWER: + { + phyParam.Value = CN470_DEFAULT_TX_POWER; + break; + } + case PHY_MAX_PAYLOAD: + { + phyParam.Value = MaxPayloadOfDatarateCN470[getPhy->Datarate]; + break; + } + case PHY_MAX_PAYLOAD_REPEATER: + { + phyParam.Value = MaxPayloadOfDatarateRepeaterCN470[getPhy->Datarate]; + break; + } + case PHY_DUTY_CYCLE: + { + phyParam.Value = CN470_DUTY_CYCLE_ENABLED; + break; + } + case PHY_MAX_RX_WINDOW: + { + phyParam.Value = CN470_MAX_RX_WINDOW; + break; + } + case PHY_RECEIVE_DELAY1: + { + phyParam.Value = CN470_RECEIVE_DELAY1; + break; + } + case PHY_RECEIVE_DELAY2: + { + phyParam.Value = CN470_RECEIVE_DELAY2; + break; + } + case PHY_JOIN_ACCEPT_DELAY1: + { + phyParam.Value = CN470_JOIN_ACCEPT_DELAY1; + break; + } + case PHY_JOIN_ACCEPT_DELAY2: + { + phyParam.Value = CN470_JOIN_ACCEPT_DELAY2; + break; + } + case PHY_MAX_FCNT_GAP: + { + phyParam.Value = CN470_MAX_FCNT_GAP; + break; + } + case PHY_ACK_TIMEOUT: + { + phyParam.Value = ( CN470_ACKTIMEOUT + randr( -CN470_ACK_TIMEOUT_RND, CN470_ACK_TIMEOUT_RND ) ); + break; + } + case PHY_DEF_DR1_OFFSET: + { + phyParam.Value = CN470_DEFAULT_RX1_DR_OFFSET; + break; + } + case PHY_DEF_RX2_FREQUENCY: + { + phyParam.Value = CN470_RX_WND_2_FREQ; + break; + } + case PHY_DEF_RX2_DR: + { + phyParam.Value = CN470_RX_WND_2_DR; + break; + } + case PHY_CHANNELS_MASK: + { + phyParam.ChannelsMask = ChannelsMask; + break; + } + case PHY_CHANNELS_DEFAULT_MASK: + { + phyParam.ChannelsMask = ChannelsDefaultMask; + break; + } + case PHY_MAX_NB_CHANNELS: + { + phyParam.Value = CN470_MAX_NB_CHANNELS; + break; + } + case PHY_CHANNELS: + { + phyParam.Channels = Channels; + break; + } + case PHY_DEF_UPLINK_DWELL_TIME: + case PHY_DEF_DOWNLINK_DWELL_TIME: + { + phyParam.Value = 0; + break; + } + case PHY_DEF_MAX_EIRP: + { + phyParam.fValue = CN470_DEFAULT_MAX_EIRP; + break; + } + case PHY_DEF_ANTENNA_GAIN: + { + phyParam.fValue = CN470_DEFAULT_ANTENNA_GAIN; + break; + } + case PHY_NB_JOIN_TRIALS: + case PHY_DEF_NB_JOIN_TRIALS: + { + phyParam.Value = 48; + break; + } + default: + { + break; + } + } + + return phyParam; +} + +void RegionCN470SetBandTxDone( SetBandTxDoneParams_t* txDone ) +{ + RegionCommonSetBandTxDone( txDone->Joined, &Bands[Channels[txDone->Channel].Band], txDone->LastTxDoneTime ); +} + +void RegionCN470InitDefaults( InitType_t type ) +{ + switch( type ) + { + case INIT_TYPE_INIT: + { + // Channels + // 125 kHz channels + for( uint8_t i = 0; i < CN470_MAX_NB_CHANNELS; i++ ) + { + Channels[i].Frequency = 470300000 + i * 200000; + Channels[i].DrRange.Value = ( DR_5 << 4 ) | DR_0; + Channels[i].Band = 0; + } + + // Initialize the channels default mask + ChannelsDefaultMask[0] = 0xFFFF; + ChannelsDefaultMask[1] = 0xFFFF; + ChannelsDefaultMask[2] = 0xFFFF; + ChannelsDefaultMask[3] = 0xFFFF; + ChannelsDefaultMask[4] = 0xFFFF; + ChannelsDefaultMask[5] = 0xFFFF; + + // Update the channels mask + RegionCommonChanMaskCopy( ChannelsMask, ChannelsDefaultMask, 6 ); + break; + } + case INIT_TYPE_RESTORE: + { + // Restore channels default mask + RegionCommonChanMaskCopy( ChannelsMask, ChannelsDefaultMask, 6 ); + break; + } + default: + { + break; + } + } +} + +bool RegionCN470Verify( VerifyParams_t* verify, PhyAttribute_t phyAttribute ) +{ + switch( phyAttribute ) + { + case PHY_TX_DR: + case PHY_DEF_TX_DR: + { + return RegionCommonValueInRange( verify->DatarateParams.Datarate, CN470_TX_MIN_DATARATE, CN470_TX_MAX_DATARATE ); + } + case PHY_RX_DR: + { + return RegionCommonValueInRange( verify->DatarateParams.Datarate, CN470_RX_MIN_DATARATE, CN470_RX_MAX_DATARATE ); + } + case PHY_DEF_TX_POWER: + case PHY_TX_POWER: + { + // Remark: switched min and max! + return RegionCommonValueInRange( verify->TxPower, CN470_MAX_TX_POWER, CN470_MIN_TX_POWER ); + } + case PHY_DUTY_CYCLE: + { + return CN470_DUTY_CYCLE_ENABLED; + } + case PHY_NB_JOIN_TRIALS: + { + if( verify->NbJoinTrials < 48 ) + { + return false; + } + break; + } + default: + return false; + } + return true; +} + +void RegionCN470ApplyCFList( ApplyCFListParams_t* applyCFList ) +{ + return; +} + +bool RegionCN470ChanMaskSet( ChanMaskSetParams_t* chanMaskSet ) +{ + switch( chanMaskSet->ChannelsMaskType ) + { + case CHANNELS_MASK: + { + RegionCommonChanMaskCopy( ChannelsMask, chanMaskSet->ChannelsMaskIn, 6 ); + break; + } + case CHANNELS_DEFAULT_MASK: + { + RegionCommonChanMaskCopy( ChannelsDefaultMask, chanMaskSet->ChannelsMaskIn, 6 ); + break; + } + default: + return false; + } + return true; +} + +bool RegionCN470AdrNext( AdrNextParams_t* adrNext, int8_t* drOut, int8_t* txPowOut, uint32_t* adrAckCounter ) +{ + bool adrAckReq = false; + int8_t datarate = adrNext->Datarate; + int8_t txPower = adrNext->TxPower; + GetPhyParams_t getPhy; + PhyParam_t phyParam; + + // Report back the adr ack counter + *adrAckCounter = adrNext->AdrAckCounter; + + if( adrNext->AdrEnabled == true ) + { + if( datarate == CN470_TX_MIN_DATARATE ) + { + *adrAckCounter = 0; + adrAckReq = false; + } + else + { + if( adrNext->AdrAckCounter >= CN470_ADR_ACK_LIMIT ) + { + adrAckReq = true; + txPower = CN470_MAX_TX_POWER; + } + else + { + adrAckReq = false; + } + if( adrNext->AdrAckCounter >= ( CN470_ADR_ACK_LIMIT + CN470_ADR_ACK_DELAY ) ) + { + if( ( adrNext->AdrAckCounter % CN470_ADR_ACK_DELAY ) == 1 ) + { + // Decrease the datarate + getPhy.Attribute = PHY_NEXT_LOWER_TX_DR; + getPhy.Datarate = datarate; + getPhy.UplinkDwellTime = adrNext->UplinkDwellTime; + phyParam = RegionCN470GetPhyParam( &getPhy ); + datarate = phyParam.Value; + + if( datarate == CN470_TX_MIN_DATARATE ) + { + // We must set adrAckReq to false as soon as we reach the lowest datarate + adrAckReq = false; + if( adrNext->UpdateChanMask == true ) + { + // Re-enable default channels + ChannelsMask[0] = 0xFFFF; + ChannelsMask[1] = 0xFFFF; + ChannelsMask[2] = 0xFFFF; + ChannelsMask[3] = 0xFFFF; + ChannelsMask[4] = 0xFFFF; + ChannelsMask[5] = 0xFFFF; + } + } + } + } + } + } + + *drOut = datarate; + *txPowOut = txPower; + return adrAckReq; +} + +void RegionCN470ComputeRxWindowParameters( int8_t datarate, uint8_t minRxSymbols, uint32_t rxError, RxConfigParams_t *rxConfigParams ) +{ + double tSymbol = 0.0; + + // Get the datarate, perform a boundary check + rxConfigParams->Datarate = MIN( datarate, CN470_RX_MAX_DATARATE ); + rxConfigParams->Bandwidth = GetBandwidth( rxConfigParams->Datarate ); + + tSymbol = RegionCommonComputeSymbolTimeLoRa( DataratesCN470[rxConfigParams->Datarate], BandwidthsCN470[rxConfigParams->Datarate] ); + + RegionCommonComputeRxWindowParameters( tSymbol, minRxSymbols, rxError, RADIO_WAKEUP_TIME, &rxConfigParams->WindowTimeout, &rxConfigParams->WindowOffset ); +} + +bool RegionCN470RxConfig( RxConfigParams_t* rxConfig, int8_t* datarate ) +{ + int8_t dr = rxConfig->Datarate; + uint8_t maxPayload = 0; + int8_t phyDr = 0; + uint32_t frequency = rxConfig->Frequency; + + if( Radio.GetStatus( ) != RF_IDLE ) + { + return false; + } + + if( rxConfig->Window == 0 ) + { + // Apply window 1 frequency + frequency = CN470_FIRST_RX1_CHANNEL + ( rxConfig->Channel % 48 ) * CN470_STEPWIDTH_RX1_CHANNEL; + } + + // Read the physical datarate from the datarates table + phyDr = DataratesCN470[dr]; + + Radio.SetChannel( frequency ); + + // Radio configuration + Radio.SetRxConfig( MODEM_LORA, rxConfig->Bandwidth, phyDr, 1, 0, 8, rxConfig->WindowTimeout, false, 0, false, 0, 0, true, rxConfig->RxContinuous ); + + if( rxConfig->RepeaterSupport == true ) + { + maxPayload = MaxPayloadOfDatarateRepeaterCN470[dr]; + } + else + { + maxPayload = MaxPayloadOfDatarateCN470[dr]; + } + Radio.SetMaxPayloadLength( MODEM_LORA, maxPayload + LORA_MAC_FRMPAYLOAD_OVERHEAD ); + + *datarate = (uint8_t) dr; + return true; +} + +bool RegionCN470TxConfig( TxConfigParams_t* txConfig, int8_t* txPower, TimerTime_t* txTimeOnAir ) +{ + int8_t phyDr = DataratesCN470[txConfig->Datarate]; + int8_t txPowerLimited = LimitTxPower( txConfig->TxPower, Bands[Channels[txConfig->Channel].Band].TxMaxPower, txConfig->Datarate, ChannelsMask ); + int8_t phyTxPower = 0; + + // Calculate physical TX power + phyTxPower = RegionCommonComputeTxPower( txPowerLimited, txConfig->MaxEirp, txConfig->AntennaGain ); + + // Setup the radio frequency + Radio.SetChannel( Channels[txConfig->Channel].Frequency ); + + Radio.SetTxConfig( MODEM_LORA, phyTxPower, 0, 0, phyDr, 1, 8, false, true, 0, 0, false, 3000 ); + // Setup maximum payload lenght of the radio driver + Radio.SetMaxPayloadLength( MODEM_LORA, txConfig->PktLen ); + // Get the time-on-air of the next tx frame + *txTimeOnAir = Radio.TimeOnAir( MODEM_LORA, txConfig->PktLen ); + *txPower = txPowerLimited; + + return true; +} + +uint8_t RegionCN470LinkAdrReq( LinkAdrReqParams_t* linkAdrReq, int8_t* drOut, int8_t* txPowOut, uint8_t* nbRepOut, uint8_t* nbBytesParsed ) +{ + uint8_t status = 0x07; + RegionCommonLinkAdrParams_t linkAdrParams; + uint8_t nextIndex = 0; + uint8_t bytesProcessed = 0; + uint16_t channelsMask[6] = { 0, 0, 0, 0, 0, 0 }; + GetPhyParams_t getPhy; + PhyParam_t phyParam; + RegionCommonLinkAdrReqVerifyParams_t linkAdrVerifyParams; + + // Initialize local copy of channels mask + RegionCommonChanMaskCopy( channelsMask, ChannelsMask, 6 ); + + while( bytesProcessed < linkAdrReq->PayloadSize ) + { + // Get ADR request parameters + nextIndex = RegionCommonParseLinkAdrReq( &( linkAdrReq->Payload[bytesProcessed] ), &linkAdrParams ); + + if( nextIndex == 0 ) + break; // break loop, since no more request has been found + + // Update bytes processed + bytesProcessed += nextIndex; + + // Revert status, as we only check the last ADR request for the channel mask KO + status = 0x07; + + if( linkAdrParams.ChMaskCtrl == 6 ) + { + // Enable all 125 kHz channels + channelsMask[0] = 0xFFFF; + channelsMask[1] = 0xFFFF; + channelsMask[2] = 0xFFFF; + channelsMask[3] = 0xFFFF; + channelsMask[4] = 0xFFFF; + channelsMask[5] = 0xFFFF; + } + else if( linkAdrParams.ChMaskCtrl == 7 ) + { + status &= 0xFE; // Channel mask KO + } + else + { + for( uint8_t i = 0; i < 16; i++ ) + { + if( ( ( linkAdrParams.ChMask & ( 1 << i ) ) != 0 ) && + ( Channels[linkAdrParams.ChMaskCtrl * 16 + i].Frequency == 0 ) ) + {// Trying to enable an undefined channel + status &= 0xFE; // Channel mask KO + } + } + channelsMask[linkAdrParams.ChMaskCtrl] = linkAdrParams.ChMask; + } + } + + // Get the minimum possible datarate + getPhy.Attribute = PHY_MIN_TX_DR; + getPhy.UplinkDwellTime = linkAdrReq->UplinkDwellTime; + phyParam = RegionCN470GetPhyParam( &getPhy ); + + linkAdrVerifyParams.Status = status; + linkAdrVerifyParams.AdrEnabled = linkAdrReq->AdrEnabled; + linkAdrVerifyParams.Datarate = linkAdrParams.Datarate; + linkAdrVerifyParams.TxPower = linkAdrParams.TxPower; + linkAdrVerifyParams.NbRep = linkAdrParams.NbRep; + linkAdrVerifyParams.CurrentDatarate = linkAdrReq->CurrentDatarate; + linkAdrVerifyParams.CurrentTxPower = linkAdrReq->CurrentTxPower; + linkAdrVerifyParams.CurrentNbRep = linkAdrReq->CurrentNbRep; + linkAdrVerifyParams.NbChannels = CN470_MAX_NB_CHANNELS; + linkAdrVerifyParams.ChannelsMask = channelsMask; + linkAdrVerifyParams.MinDatarate = ( int8_t )phyParam.Value; + linkAdrVerifyParams.MaxDatarate = CN470_TX_MAX_DATARATE; + linkAdrVerifyParams.Channels = Channels; + linkAdrVerifyParams.MinTxPower = CN470_MIN_TX_POWER; + linkAdrVerifyParams.MaxTxPower = CN470_MAX_TX_POWER; + + // Verify the parameters and update, if necessary + status = RegionCommonLinkAdrReqVerifyParams( &linkAdrVerifyParams, &linkAdrParams.Datarate, &linkAdrParams.TxPower, &linkAdrParams.NbRep ); + + // Update channelsMask if everything is correct + if( status == 0x07 ) + { + // Copy Mask + RegionCommonChanMaskCopy( ChannelsMask, channelsMask, 6 ); + } + + // Update status variables + *drOut = linkAdrParams.Datarate; + *txPowOut = linkAdrParams.TxPower; + *nbRepOut = linkAdrParams.NbRep; + *nbBytesParsed = bytesProcessed; + + return status; +} + +uint8_t RegionCN470RxParamSetupReq( RxParamSetupReqParams_t* rxParamSetupReq ) +{ + uint8_t status = 0x07; + uint32_t freq = rxParamSetupReq->Frequency; + + // Verify radio frequency + if( ( Radio.CheckRfFrequency( freq ) == false ) || + ( freq < CN470_FIRST_RX1_CHANNEL ) || + ( freq > CN470_LAST_RX1_CHANNEL ) || + ( ( ( freq - ( uint32_t ) CN470_FIRST_RX1_CHANNEL ) % ( uint32_t ) CN470_STEPWIDTH_RX1_CHANNEL ) != 0 ) ) + { + status &= 0xFE; // Channel frequency KO + } + + // Verify datarate + if( RegionCommonValueInRange( rxParamSetupReq->Datarate, CN470_RX_MIN_DATARATE, CN470_RX_MAX_DATARATE ) == false ) + { + status &= 0xFD; // Datarate KO + } + + // Verify datarate offset + if( RegionCommonValueInRange( rxParamSetupReq->DrOffset, CN470_MIN_RX1_DR_OFFSET, CN470_MAX_RX1_DR_OFFSET ) == false ) + { + status &= 0xFB; // Rx1DrOffset range KO + } + + return status; +} + +uint8_t RegionCN470NewChannelReq( NewChannelReqParams_t* newChannelReq ) +{ + // Datarate and frequency KO + return 0; +} + +int8_t RegionCN470TxParamSetupReq( TxParamSetupReqParams_t* txParamSetupReq ) +{ + return -1; +} + +uint8_t RegionCN470DlChannelReq( DlChannelReqParams_t* dlChannelReq ) +{ + return 0; +} + +int8_t RegionCN470AlternateDr( AlternateDrParams_t* alternateDr ) +{ + int8_t datarate = 0; + + if( ( alternateDr->NbTrials % 48 ) == 0 ) + { + datarate = DR_0; + } + else if( ( alternateDr->NbTrials % 32 ) == 0 ) + { + datarate = DR_1; + } + else if( ( alternateDr->NbTrials % 24 ) == 0 ) + { + datarate = DR_2; + } + else if( ( alternateDr->NbTrials % 16 ) == 0 ) + { + datarate = DR_3; + } + else if( ( alternateDr->NbTrials % 8 ) == 0 ) + { + datarate = DR_4; + } + else + { + datarate = DR_5; + } + return datarate; +} + +void RegionCN470CalcBackOff( CalcBackOffParams_t* calcBackOff ) +{ + RegionCommonCalcBackOffParams_t calcBackOffParams; + + calcBackOffParams.Channels = Channels; + calcBackOffParams.Bands = Bands; + calcBackOffParams.LastTxIsJoinRequest = calcBackOff->LastTxIsJoinRequest; + calcBackOffParams.Joined = calcBackOff->Joined; + calcBackOffParams.DutyCycleEnabled = calcBackOff->DutyCycleEnabled; + calcBackOffParams.Channel = calcBackOff->Channel; + calcBackOffParams.ElapsedTime = calcBackOff->ElapsedTime; + calcBackOffParams.TxTimeOnAir = calcBackOff->TxTimeOnAir; + + RegionCommonCalcBackOff( &calcBackOffParams ); +} + +bool RegionCN470NextChannel( NextChanParams_t* nextChanParams, uint8_t* channel, TimerTime_t* time, TimerTime_t* aggregatedTimeOff ) +{ + uint8_t nbEnabledChannels = 0; + uint8_t delayTx = 0; + uint8_t enabledChannels[CN470_MAX_NB_CHANNELS] = { 0 }; + TimerTime_t nextTxDelay = 0; + + // Count 125kHz channels + if( RegionCommonCountChannels( ChannelsMask, 0, 6 ) == 0 ) + { // Reactivate default channels + ChannelsMask[0] = 0xFFFF; + ChannelsMask[1] = 0xFFFF; + ChannelsMask[2] = 0xFFFF; + ChannelsMask[3] = 0xFFFF; + ChannelsMask[4] = 0xFFFF; + ChannelsMask[5] = 0xFFFF; + } + + if( nextChanParams->AggrTimeOff <= TimerGetElapsedTime( nextChanParams->LastAggrTx ) ) + { + // Reset Aggregated time off + *aggregatedTimeOff = 0; + + // Update bands Time OFF + nextTxDelay = RegionCommonUpdateBandTimeOff( nextChanParams->Joined, nextChanParams->DutyCycleEnabled, Bands, CN470_MAX_NB_BANDS ); + + // Search how many channels are enabled + nbEnabledChannels = CountNbOfEnabledChannels( nextChanParams->Datarate, + ChannelsMask, Channels, + Bands, enabledChannels, &delayTx ); + } + else + { + delayTx++; + nextTxDelay = nextChanParams->AggrTimeOff - TimerGetElapsedTime( nextChanParams->LastAggrTx ); + } + + if( nbEnabledChannels > 0 ) + { + // We found a valid channel + *channel = enabledChannels[randr( 0, nbEnabledChannels - 1 )]; + + *time = 0; + return true; + } + else + { + if( delayTx > 0 ) + { + // Delay transmission due to AggregatedTimeOff or to a band time off + *time = nextTxDelay; + return true; + } + // Datarate not supported by any channel + *time = 0; + return false; + } +} + +LoRaMacStatus_t RegionCN470ChannelAdd( ChannelAddParams_t* channelAdd ) +{ + return LORAMAC_STATUS_PARAMETER_INVALID; +} + +bool RegionCN470ChannelsRemove( ChannelRemoveParams_t* channelRemove ) +{ + return LORAMAC_STATUS_PARAMETER_INVALID; +} + +void RegionCN470SetContinuousWave( ContinuousWaveParams_t* continuousWave ) +{ + int8_t txPowerLimited = LimitTxPower( continuousWave->TxPower, Bands[Channels[continuousWave->Channel].Band].TxMaxPower, continuousWave->Datarate, ChannelsMask ); + int8_t phyTxPower = 0; + uint32_t frequency = Channels[continuousWave->Channel].Frequency; + + // Calculate physical TX power + phyTxPower = RegionCommonComputeTxPower( txPowerLimited, continuousWave->MaxEirp, continuousWave->AntennaGain ); + + Radio.SetTxContinuousWave( frequency, phyTxPower, continuousWave->Timeout ); +} + +uint8_t RegionCN470ApplyDrOffset( uint8_t downlinkDwellTime, int8_t dr, int8_t drOffset ) +{ + int8_t datarate = dr - drOffset; + + if( datarate < 0 ) + { + datarate = DR_0; + } + return datarate; +} diff --git a/src/mac/region/RegionCN470.h b/src/mac/region/RegionCN470.h new file mode 100755 index 0000000..deaf6f8 --- /dev/null +++ b/src/mac/region/RegionCN470.h @@ -0,0 +1,441 @@ +/*! + * \file RegionCN470.h + * + * \brief Region definition for CN470 + * + * \copyright Revised BSD License, see section \ref LICENSE. + * + * \code + * ______ _ + * / _____) _ | | + * ( (____ _____ ____ _| |_ _____ ____| |__ + * \____ \| ___ | (_ _) ___ |/ ___) _ \ + * _____) ) ____| | | || |_| ____( (___| | | | + * (______/|_____)_|_|_| \__)_____)\____)_| |_| + * (C)2013 Semtech + * + * ___ _____ _ ___ _ _____ ___ ___ ___ ___ + * / __|_ _/_\ / __| |/ / __/ _ \| _ \/ __| __| + * \__ \ | |/ _ \ (__| ' <| _| (_) | / (__| _| + * |___/ |_/_/ \_\___|_|\_\_| \___/|_|_\\___|___| + * embedded.connectivity.solutions=============== + * + * \endcode + * + * \author Miguel Luis ( Semtech ) + * + * \author Gregory Cristian ( Semtech ) + * + * \author Daniel Jaeckle ( STACKFORCE ) + * + * \defgroup REGIONCN470 Region CN470 + * Implementation according to LoRaWAN Specification v1.0.2. + * \{ + */ +#ifndef __REGION_CN470_H__ +#define __REGION_CN470_H__ + +/*! + * LoRaMac maximum number of channels + */ +#define CN470_MAX_NB_CHANNELS 96 + +/*! + * Minimal datarate that can be used by the node + */ +#define CN470_TX_MIN_DATARATE DR_0 + +/*! + * Maximal datarate that can be used by the node + */ +#define CN470_TX_MAX_DATARATE DR_5 + +/*! + * Minimal datarate that can be used by the node + */ +#define CN470_RX_MIN_DATARATE DR_0 + +/*! + * Maximal datarate that can be used by the node + */ +#define CN470_RX_MAX_DATARATE DR_5 + +/*! + * Default datarate used by the node + */ +#define CN470_DEFAULT_DATARATE DR_0 + +/*! + * Minimal Rx1 receive datarate offset + */ +#define CN470_MIN_RX1_DR_OFFSET 0 + +/*! + * Maximal Rx1 receive datarate offset + */ +#define CN470_MAX_RX1_DR_OFFSET 3 + +/*! + * Default Rx1 receive datarate offset + */ +#define CN470_DEFAULT_RX1_DR_OFFSET 0 + +/*! + * Minimal Tx output power that can be used by the node + */ +#define CN470_MIN_TX_POWER TX_POWER_7 + +/*! + * Maximal Tx output power that can be used by the node + */ +#define CN470_MAX_TX_POWER TX_POWER_0 + +/*! + * Default Tx output power used by the node + */ +#define CN470_DEFAULT_TX_POWER TX_POWER_0 + +/*! + * Default Max EIRP + */ +#define CN470_DEFAULT_MAX_EIRP 19.15f + +/*! + * Default antenna gain + */ +#define CN470_DEFAULT_ANTENNA_GAIN 2.15f + +/*! + * ADR Ack limit + */ +#define CN470_ADR_ACK_LIMIT 64 + +/*! + * ADR Ack delay + */ +#define CN470_ADR_ACK_DELAY 32 + +/*! + * Enabled or disabled the duty cycle + */ +#define CN470_DUTY_CYCLE_ENABLED 0 + +/*! + * Maximum RX window duration + */ +#define CN470_MAX_RX_WINDOW 3000 + +/*! + * Receive delay 1 + */ +#define CN470_RECEIVE_DELAY1 1000 + +/*! + * Receive delay 2 + */ +#define CN470_RECEIVE_DELAY2 2000 + +/*! + * Join accept delay 1 + */ +#define CN470_JOIN_ACCEPT_DELAY1 5000 + +/*! + * Join accept delay 2 + */ +#define CN470_JOIN_ACCEPT_DELAY2 6000 + +/*! + * Maximum frame counter gap + */ +#define CN470_MAX_FCNT_GAP 16384 + +/*! + * Ack timeout + */ +#define CN470_ACKTIMEOUT 2000 + +/*! + * Random ack timeout limits + */ +#define CN470_ACK_TIMEOUT_RND 1000 + +/*! + * Second reception window channel frequency definition. + */ +#define CN470_RX_WND_2_FREQ 505300000 + +/*! + * Second reception window channel datarate definition. + */ +#define CN470_RX_WND_2_DR DR_0 + +/*! + * LoRaMac maximum number of bands + */ +#define CN470_MAX_NB_BANDS 1 + +/*! + * Band 0 definition + * { DutyCycle, TxMaxPower, LastTxDoneTime, TimeOff } + */ +#define CN470_BAND0 { 1, CN470_MAX_TX_POWER, 0, 0 } // 100.0 % + +/*! + * Defines the first channel for RX window 1 for CN470 band + */ +#define CN470_FIRST_RX1_CHANNEL ( (uint32_t) 500300000 ) + +/*! + * Defines the last channel for RX window 1 for CN470 band + */ +#define CN470_LAST_RX1_CHANNEL ( (uint32_t) 509700000 ) + +/*! + * Defines the step width of the channels for RX window 1 + */ +#define CN470_STEPWIDTH_RX1_CHANNEL ( (uint32_t) 200000 ) + +/*! + * Data rates table definition + */ +static const uint8_t DataratesCN470[] = { 12, 11, 10, 9, 8, 7 }; + +/*! + * Bandwidths table definition in Hz + */ +static const uint32_t BandwidthsCN470[] = { 125000, 125000, 125000, 125000, 125000, 125000 }; + +/*! + * Maximum payload with respect to the datarate index. Cannot operate with repeater. + */ +static const uint8_t MaxPayloadOfDatarateCN470[] = { 51, 51, 51, 115, 222, 222 }; + +/*! + * Maximum payload with respect to the datarate index. Can operate with repeater. + */ +static const uint8_t MaxPayloadOfDatarateRepeaterCN470[] = { 51, 51, 51, 115, 222, 222 }; + +/*! + * \brief The function gets a value of a specific phy attribute. + * + * \param [IN] getPhy Pointer to the function parameters. + * + * \retval Returns a structure containing the PHY parameter. + */ +PhyParam_t RegionCN470GetPhyParam( GetPhyParams_t* getPhy ); + +/*! + * \brief Updates the last TX done parameters of the current channel. + * + * \param [IN] txDone Pointer to the function parameters. + */ +void RegionCN470SetBandTxDone( SetBandTxDoneParams_t* txDone ); + +/*! + * \brief Initializes the channels masks and the channels. + * + * \param [IN] type Sets the initialization type. + */ +void RegionCN470InitDefaults( InitType_t type ); + +/*! + * \brief Verifies a parameter. + * + * \param [IN] verify Pointer to the function parameters. + * + * \param [IN] type Sets the initialization type. + * + * \retval Returns true, if the parameter is valid. + */ +bool RegionCN470Verify( VerifyParams_t* verify, PhyAttribute_t phyAttribute ); + +/*! + * \brief The function parses the input buffer and sets up the channels of the + * CF list. + * + * \param [IN] applyCFList Pointer to the function parameters. + */ +void RegionCN470ApplyCFList( ApplyCFListParams_t* applyCFList ); + +/*! + * \brief Sets a channels mask. + * + * \param [IN] chanMaskSet Pointer to the function parameters. + * + * \retval Returns true, if the channels mask could be set. + */ +bool RegionCN470ChanMaskSet( ChanMaskSetParams_t* chanMaskSet ); + +/*! + * \brief Calculates the next datarate to set, when ADR is on or off. + * + * \param [IN] adrNext Pointer to the function parameters. + * + * \param [OUT] drOut The calculated datarate for the next TX. + * + * \param [OUT] txPowOut The TX power for the next TX. + * + * \param [OUT] adrAckCounter The calculated ADR acknowledgement counter. + * + * \retval Returns true, if an ADR request should be performed. + */ +bool RegionCN470AdrNext( AdrNextParams_t* adrNext, int8_t* drOut, int8_t* txPowOut, uint32_t* adrAckCounter ); + +/*! + * Computes the Rx window timeout and offset. + * + * \param [IN] datarate Rx window datarate index to be used + * + * \param [IN] minRxSymbols Minimum required number of symbols to detect an Rx frame. + * + * \param [IN] rxError System maximum timing error of the receiver. In milliseconds + * The receiver will turn on in a [-rxError : +rxError] ms + * interval around RxOffset + * + * \param [OUT]rxConfigParams Returns updated WindowTimeout and WindowOffset fields. + */ +void RegionCN470ComputeRxWindowParameters( int8_t datarate, uint8_t minRxSymbols, uint32_t rxError, RxConfigParams_t *rxConfigParams ); + +/*! + * \brief Configuration of the RX windows. + * + * \param [IN] rxConfig Pointer to the function parameters. + * + * \param [OUT] datarate The datarate index which was set. + * + * \retval Returns true, if the configuration was applied successfully. + */ +bool RegionCN470RxConfig( RxConfigParams_t* rxConfig, int8_t* datarate ); + +/*! + * \brief TX configuration. + * + * \param [IN] txConfig Pointer to the function parameters. + * + * \param [OUT] txPower The tx power index which was set. + * + * \param [OUT] txTimeOnAir The time-on-air of the frame. + * + * \retval Returns true, if the configuration was applied successfully. + */ +bool RegionCN470TxConfig( TxConfigParams_t* txConfig, int8_t* txPower, TimerTime_t* txTimeOnAir ); + +/*! + * \brief The function processes a Link ADR Request. + * + * \param [IN] linkAdrReq Pointer to the function parameters. + * + * \retval Returns the status of the operation, according to the LoRaMAC specification. + */ +uint8_t RegionCN470LinkAdrReq( LinkAdrReqParams_t* linkAdrReq, int8_t* drOut, int8_t* txPowOut, uint8_t* nbRepOut, uint8_t* nbBytesParsed ); + +/*! + * \brief The function processes a RX Parameter Setup Request. + * + * \param [IN] rxParamSetupReq Pointer to the function parameters. + * + * \retval Returns the status of the operation, according to the LoRaMAC specification. + */ +uint8_t RegionCN470RxParamSetupReq( RxParamSetupReqParams_t* rxParamSetupReq ); + +/*! + * \brief The function processes a Channel Request. + * + * \param [IN] newChannelReq Pointer to the function parameters. + * + * \retval Returns the status of the operation, according to the LoRaMAC specification. + */ +uint8_t RegionCN470NewChannelReq( NewChannelReqParams_t* newChannelReq ); + +/*! + * \brief The function processes a TX ParamSetup Request. + * + * \param [IN] txParamSetupReq Pointer to the function parameters. + * + * \retval Returns the status of the operation, according to the LoRaMAC specification. + * Returns -1, if the functionality is not implemented. In this case, the end node + * shall not process the command. + */ +int8_t RegionCN470TxParamSetupReq( TxParamSetupReqParams_t* txParamSetupReq ); + +/*! + * \brief The function processes a DlChannel Request. + * + * \param [IN] dlChannelReq Pointer to the function parameters. + * + * \retval Returns the status of the operation, according to the LoRaMAC specification. + */ +uint8_t RegionCN470DlChannelReq( DlChannelReqParams_t* dlChannelReq ); + +/*! + * \brief Alternates the datarate of the channel for the join request. + * + * \param [IN] alternateDr Pointer to the function parameters. + * + * \retval Datarate to apply. + */ +int8_t RegionCN470AlternateDr( AlternateDrParams_t* alternateDr ); + +/*! + * \brief Calculates the back-off time. + * + * \param [IN] calcBackOff Pointer to the function parameters. + */ +void RegionCN470CalcBackOff( CalcBackOffParams_t* calcBackOff ); + +/*! + * \brief Searches and set the next random available channel + * + * \param [OUT] channel Next channel to use for TX. + * + * \param [OUT] time Time to wait for the next transmission according to the duty + * cycle. + * + * \param [OUT] aggregatedTimeOff Updates the aggregated time off. + * + * \retval Function status [1: OK, 0: Unable to find a channel on the current datarate] + */ +bool RegionCN470NextChannel( NextChanParams_t* nextChanParams, uint8_t* channel, TimerTime_t* time, TimerTime_t* aggregatedTimeOff ); + +/*! + * \brief Adds a channel. + * + * \param [IN] channelAdd Pointer to the function parameters. + * + * \retval Status of the operation. + */ +LoRaMacStatus_t RegionCN470ChannelAdd( ChannelAddParams_t* channelAdd ); + +/*! + * \brief Removes a channel. + * + * \param [IN] channelRemove Pointer to the function parameters. + * + * \retval Returns true, if the channel was removed successfully. + */ +bool RegionCN470ChannelsRemove( ChannelRemoveParams_t* channelRemove ); + +/*! + * \brief Sets the radio into continuous wave mode. + * + * \param [IN] continuousWave Pointer to the function parameters. + */ +void RegionCN470SetContinuousWave( ContinuousWaveParams_t* continuousWave ); + +/*! + * \brief Computes new datarate according to the given offset + * + * \param [IN] downlinkDwellTime Downlink dwell time configuration. 0: No limit, 1: 400ms + * + * \param [IN] dr Current datarate + * + * \param [IN] drOffset Offset to be applied + * + * \retval newDr Computed datarate. + */ +uint8_t RegionCN470ApplyDrOffset( uint8_t downlinkDwellTime, int8_t dr, int8_t drOffset ); + +/*! \} defgroup REGIONCN470 */ + +#endif // __REGION_CN470_H__ diff --git a/src/mac/region/RegionCN779.c b/src/mac/region/RegionCN779.c new file mode 100755 index 0000000..c5d9b7b --- /dev/null +++ b/src/mac/region/RegionCN779.c @@ -0,0 +1,1045 @@ +/* + / _____) _ | | +( (____ _____ ____ _| |_ _____ ____| |__ + \____ \| ___ | (_ _) ___ |/ ___) _ \ + _____) ) ____| | | || |_| ____( (___| | | | +(______/|_____)_|_|_| \__)_____)\____)_| |_| + (C)2013 Semtech + ___ _____ _ ___ _ _____ ___ ___ ___ ___ +/ __|_ _/_\ / __| |/ / __/ _ \| _ \/ __| __| +\__ \ | |/ _ \ (__| ' <| _| (_) | / (__| _| +|___/ |_/_/ \_\___|_|\_\_| \___/|_|_\\___|___| +embedded.connectivity.solutions=============== + +Description: LoRa MAC region CN779 implementation + +License: Revised BSD License, see LICENSE.TXT file include in the project + +Maintainer: Miguel Luis ( Semtech ), Gregory Cristian ( Semtech ) and Daniel Jaeckle ( STACKFORCE ) +*/ +#include +#include +#include +#include + +#include "board.h" +#include "LoRaMac.h" + +#include "utilities.h" + +#include "Region.h" +#include "RegionCommon.h" +#include "RegionCN779.h" + +// Definitions +#define CHANNELS_MASK_SIZE 1 + +// Global attributes +/*! + * LoRaMAC channels + */ +static ChannelParams_t Channels[CN779_MAX_NB_CHANNELS]; + +/*! + * LoRaMac bands + */ +static Band_t Bands[CN779_MAX_NB_BANDS] = +{ + CN779_BAND0 +}; + +/*! + * LoRaMac channels mask + */ +static uint16_t ChannelsMask[CHANNELS_MASK_SIZE]; + +/*! + * LoRaMac channels default mask + */ +static uint16_t ChannelsDefaultMask[CHANNELS_MASK_SIZE]; + +// Static functions +static int8_t GetNextLowerTxDr( int8_t dr, int8_t minDr ) +{ + uint8_t nextLowerDr = 0; + + if( dr == minDr ) + { + nextLowerDr = minDr; + } + else + { + nextLowerDr = dr - 1; + } + return nextLowerDr; +} + +static uint32_t GetBandwidth( uint32_t drIndex ) +{ + switch( BandwidthsCN779[drIndex] ) + { + default: + case 125000: + return 0; + case 250000: + return 1; + case 500000: + return 2; + } +} + +static int8_t LimitTxPower( int8_t txPower, int8_t maxBandTxPower, int8_t datarate, uint16_t* channelsMask ) +{ + int8_t txPowerResult = txPower; + + // Limit tx power to the band max + txPowerResult = MAX( txPower, maxBandTxPower ); + + return txPowerResult; +} + +static bool VerifyTxFreq( uint32_t freq ) +{ + // Check radio driver support + if( Radio.CheckRfFrequency( freq ) == false ) + { + return false; + } + + if( ( freq < 779500000 ) || ( freq > 786500000 ) ) + { + return false; + } + return true; +} + +static uint8_t CountNbOfEnabledChannels( bool joined, uint8_t datarate, uint16_t* channelsMask, ChannelParams_t* channels, Band_t* bands, uint8_t* enabledChannels, uint8_t* delayTx ) +{ + uint8_t nbEnabledChannels = 0; + uint8_t delayTransmission = 0; + + for( uint8_t i = 0, k = 0; i < CN779_MAX_NB_CHANNELS; i += 16, k++ ) + { + for( uint8_t j = 0; j < 16; j++ ) + { + if( ( channelsMask[k] & ( 1 << j ) ) != 0 ) + { + if( channels[i + j].Frequency == 0 ) + { // Check if the channel is enabled + continue; + } + if( joined == false ) + { + if( ( CN779_JOIN_CHANNELS & ( 1 << j ) ) == 0 ) + { + continue; + } + } + if( RegionCommonValueInRange( datarate, channels[i + j].DrRange.Fields.Min, + channels[i + j].DrRange.Fields.Max ) == false ) + { // Check if the current channel selection supports the given datarate + continue; + } + if( bands[channels[i + j].Band].TimeOff > 0 ) + { // Check if the band is available for transmission + delayTransmission++; + continue; + } + enabledChannels[nbEnabledChannels++] = i + j; + } + } + } + + *delayTx = delayTransmission; + return nbEnabledChannels; +} + +PhyParam_t RegionCN779GetPhyParam( GetPhyParams_t* getPhy ) +{ + PhyParam_t phyParam = { 0 }; + + switch( getPhy->Attribute ) + { + case PHY_MIN_RX_DR: + { + phyParam.Value = CN779_RX_MIN_DATARATE; + break; + } + case PHY_MIN_TX_DR: + { + phyParam.Value = CN779_TX_MIN_DATARATE; + break; + } + case PHY_DEF_TX_DR: + { + phyParam.Value = CN779_DEFAULT_DATARATE; + break; + } + case PHY_NEXT_LOWER_TX_DR: + { + phyParam.Value = GetNextLowerTxDr( getPhy->Datarate, CN779_TX_MIN_DATARATE ); + break; + } + case PHY_DEF_TX_POWER: + { + phyParam.Value = CN779_DEFAULT_TX_POWER; + break; + } + case PHY_MAX_PAYLOAD: + { + phyParam.Value = MaxPayloadOfDatarateCN779[getPhy->Datarate]; + break; + } + case PHY_MAX_PAYLOAD_REPEATER: + { + phyParam.Value = MaxPayloadOfDatarateRepeaterCN779[getPhy->Datarate]; + break; + } + case PHY_DUTY_CYCLE: + { + phyParam.Value = CN779_DUTY_CYCLE_ENABLED; + break; + } + case PHY_MAX_RX_WINDOW: + { + phyParam.Value = CN779_MAX_RX_WINDOW; + break; + } + case PHY_RECEIVE_DELAY1: + { + phyParam.Value = CN779_RECEIVE_DELAY1; + break; + } + case PHY_RECEIVE_DELAY2: + { + phyParam.Value = CN779_RECEIVE_DELAY2; + break; + } + case PHY_JOIN_ACCEPT_DELAY1: + { + phyParam.Value = CN779_JOIN_ACCEPT_DELAY1; + break; + } + case PHY_JOIN_ACCEPT_DELAY2: + { + phyParam.Value = CN779_JOIN_ACCEPT_DELAY2; + break; + } + case PHY_MAX_FCNT_GAP: + { + phyParam.Value = CN779_MAX_FCNT_GAP; + break; + } + case PHY_ACK_TIMEOUT: + { + phyParam.Value = ( CN779_ACKTIMEOUT + randr( -CN779_ACK_TIMEOUT_RND, CN779_ACK_TIMEOUT_RND ) ); + break; + } + case PHY_DEF_DR1_OFFSET: + { + phyParam.Value = CN779_DEFAULT_RX1_DR_OFFSET; + break; + } + case PHY_DEF_RX2_FREQUENCY: + { + phyParam.Value = CN779_RX_WND_2_FREQ; + break; + } + case PHY_DEF_RX2_DR: + { + phyParam.Value = CN779_RX_WND_2_DR; + break; + } + case PHY_CHANNELS_MASK: + { + phyParam.ChannelsMask = ChannelsMask; + break; + } + case PHY_CHANNELS_DEFAULT_MASK: + { + phyParam.ChannelsMask = ChannelsDefaultMask; + break; + } + case PHY_MAX_NB_CHANNELS: + { + phyParam.Value = CN779_MAX_NB_CHANNELS; + break; + } + case PHY_CHANNELS: + { + phyParam.Channels = Channels; + break; + } + case PHY_DEF_UPLINK_DWELL_TIME: + case PHY_DEF_DOWNLINK_DWELL_TIME: + { + phyParam.Value = 0; + break; + } + case PHY_DEF_MAX_EIRP: + { + phyParam.fValue = CN779_DEFAULT_MAX_EIRP; + break; + } + case PHY_DEF_ANTENNA_GAIN: + { + phyParam.fValue = CN779_DEFAULT_ANTENNA_GAIN; + break; + } + case PHY_NB_JOIN_TRIALS: + case PHY_DEF_NB_JOIN_TRIALS: + { + phyParam.Value = 48; + break; + } + default: + { + break; + } + } + + return phyParam; +} + +void RegionCN779SetBandTxDone( SetBandTxDoneParams_t* txDone ) +{ + RegionCommonSetBandTxDone( txDone->Joined, &Bands[Channels[txDone->Channel].Band], txDone->LastTxDoneTime ); +} + +void RegionCN779InitDefaults( InitType_t type ) +{ + switch( type ) + { + case INIT_TYPE_INIT: + { + // Channels + Channels[0] = ( ChannelParams_t ) CN779_LC1; + Channels[1] = ( ChannelParams_t ) CN779_LC2; + Channels[2] = ( ChannelParams_t ) CN779_LC3; + + // Initialize the channels default mask + ChannelsDefaultMask[0] = LC( 1 ) + LC( 2 ) + LC( 3 ); + // Update the channels mask + RegionCommonChanMaskCopy( ChannelsMask, ChannelsDefaultMask, 1 ); + break; + } + case INIT_TYPE_RESTORE: + { + // Restore channels default mask + ChannelsMask[0] |= ChannelsDefaultMask[0]; + break; + } + default: + { + break; + } + } +} + +bool RegionCN779Verify( VerifyParams_t* verify, PhyAttribute_t phyAttribute ) +{ + switch( phyAttribute ) + { + case PHY_TX_DR: + { + return RegionCommonValueInRange( verify->DatarateParams.Datarate, CN779_TX_MIN_DATARATE, CN779_TX_MAX_DATARATE ); + } + case PHY_DEF_TX_DR: + { + return RegionCommonValueInRange( verify->DatarateParams.Datarate, DR_0, DR_5 ); + } + case PHY_RX_DR: + { + return RegionCommonValueInRange( verify->DatarateParams.Datarate, CN779_RX_MIN_DATARATE, CN779_RX_MAX_DATARATE ); + } + case PHY_DEF_TX_POWER: + case PHY_TX_POWER: + { + // Remark: switched min and max! + return RegionCommonValueInRange( verify->TxPower, CN779_MAX_TX_POWER, CN779_MIN_TX_POWER ); + } + case PHY_DUTY_CYCLE: + { + return CN779_DUTY_CYCLE_ENABLED; + } + case PHY_NB_JOIN_TRIALS: + { + if( verify->NbJoinTrials < 48 ) + { + return false; + } + break; + } + default: + return false; + } + return true; +} + +void RegionCN779ApplyCFList( ApplyCFListParams_t* applyCFList ) +{ + ChannelParams_t newChannel; + ChannelAddParams_t channelAdd; + ChannelRemoveParams_t channelRemove; + + // Setup default datarate range + newChannel.DrRange.Value = ( DR_5 << 4 ) | DR_0; + + // Size of the optional CF list + if( applyCFList->Size != 16 ) + { + return; + } + + // Last byte is RFU, don't take it into account + for( uint8_t i = 0, chanIdx = CN779_NUMB_DEFAULT_CHANNELS; chanIdx < CN779_MAX_NB_CHANNELS; i+=3, chanIdx++ ) + { + if( chanIdx < ( CN779_NUMB_CHANNELS_CF_LIST + CN779_NUMB_DEFAULT_CHANNELS ) ) + { + // Channel frequency + newChannel.Frequency = (uint32_t) applyCFList->Payload[i]; + newChannel.Frequency |= ( (uint32_t) applyCFList->Payload[i + 1] << 8 ); + newChannel.Frequency |= ( (uint32_t) applyCFList->Payload[i + 2] << 16 ); + newChannel.Frequency *= 100; + + // Initialize alternative frequency to 0 + newChannel.Rx1Frequency = 0; + } + else + { + newChannel.Frequency = 0; + newChannel.DrRange.Value = 0; + newChannel.Rx1Frequency = 0; + } + + if( newChannel.Frequency != 0 ) + { + channelAdd.NewChannel = &newChannel; + channelAdd.ChannelId = chanIdx; + + // Try to add all channels + RegionCN779ChannelAdd( &channelAdd ); + } + else + { + channelRemove.ChannelId = chanIdx; + + RegionCN779ChannelsRemove( &channelRemove ); + } + } +} + +bool RegionCN779ChanMaskSet( ChanMaskSetParams_t* chanMaskSet ) +{ + switch( chanMaskSet->ChannelsMaskType ) + { + case CHANNELS_MASK: + { + RegionCommonChanMaskCopy( ChannelsMask, chanMaskSet->ChannelsMaskIn, 1 ); + break; + } + case CHANNELS_DEFAULT_MASK: + { + RegionCommonChanMaskCopy( ChannelsDefaultMask, chanMaskSet->ChannelsMaskIn, 1 ); + break; + } + default: + return false; + } + return true; +} + +bool RegionCN779AdrNext( AdrNextParams_t* adrNext, int8_t* drOut, int8_t* txPowOut, uint32_t* adrAckCounter ) +{ + bool adrAckReq = false; + int8_t datarate = adrNext->Datarate; + int8_t txPower = adrNext->TxPower; + GetPhyParams_t getPhy; + PhyParam_t phyParam; + + // Report back the adr ack counter + *adrAckCounter = adrNext->AdrAckCounter; + + if( adrNext->AdrEnabled == true ) + { + if( datarate == CN779_TX_MIN_DATARATE ) + { + *adrAckCounter = 0; + adrAckReq = false; + } + else + { + if( adrNext->AdrAckCounter >= CN779_ADR_ACK_LIMIT ) + { + adrAckReq = true; + txPower = CN779_MAX_TX_POWER; + } + else + { + adrAckReq = false; + } + if( adrNext->AdrAckCounter >= ( CN779_ADR_ACK_LIMIT + CN779_ADR_ACK_DELAY ) ) + { + if( ( adrNext->AdrAckCounter % CN779_ADR_ACK_DELAY ) == 1 ) + { + // Decrease the datarate + getPhy.Attribute = PHY_NEXT_LOWER_TX_DR; + getPhy.Datarate = datarate; + getPhy.UplinkDwellTime = adrNext->UplinkDwellTime; + phyParam = RegionCN779GetPhyParam( &getPhy ); + datarate = phyParam.Value; + + if( datarate == CN779_TX_MIN_DATARATE ) + { + // We must set adrAckReq to false as soon as we reach the lowest datarate + adrAckReq = false; + if( adrNext->UpdateChanMask == true ) + { + // Re-enable default channels + ChannelsMask[0] |= LC( 1 ) + LC( 2 ) + LC( 3 ); + } + } + } + } + } + } + + *drOut = datarate; + *txPowOut = txPower; + return adrAckReq; +} + +void RegionCN779ComputeRxWindowParameters( int8_t datarate, uint8_t minRxSymbols, uint32_t rxError, RxConfigParams_t *rxConfigParams ) +{ + double tSymbol = 0.0; + + // Get the datarate, perform a boundary check + rxConfigParams->Datarate = MIN( datarate, CN779_RX_MAX_DATARATE ); + rxConfigParams->Bandwidth = GetBandwidth( rxConfigParams->Datarate ); + + if( rxConfigParams->Datarate == DR_7 ) + { // FSK + tSymbol = RegionCommonComputeSymbolTimeFsk( DataratesCN779[rxConfigParams->Datarate] ); + } + else + { // LoRa + tSymbol = RegionCommonComputeSymbolTimeLoRa( DataratesCN779[rxConfigParams->Datarate], BandwidthsCN779[rxConfigParams->Datarate] ); + } + + RegionCommonComputeRxWindowParameters( tSymbol, minRxSymbols, rxError, RADIO_WAKEUP_TIME, &rxConfigParams->WindowTimeout, &rxConfigParams->WindowOffset ); +} + +bool RegionCN779RxConfig( RxConfigParams_t* rxConfig, int8_t* datarate ) +{ + RadioModems_t modem; + int8_t dr = rxConfig->Datarate; + uint8_t maxPayload = 0; + int8_t phyDr = 0; + uint32_t frequency = rxConfig->Frequency; + + if( Radio.GetStatus( ) != RF_IDLE ) + { + return false; + } + + if( rxConfig->Window == 0 ) + { + // Apply window 1 frequency + frequency = Channels[rxConfig->Channel].Frequency; + // Apply the alternative RX 1 window frequency, if it is available + if( Channels[rxConfig->Channel].Rx1Frequency != 0 ) + { + frequency = Channels[rxConfig->Channel].Rx1Frequency; + } + } + + // Read the physical datarate from the datarates table + phyDr = DataratesCN779[dr]; + + Radio.SetChannel( frequency ); + + // Radio configuration + if( dr == DR_7 ) + { + modem = MODEM_FSK; + Radio.SetRxConfig( modem, 50000, phyDr * 1000, 0, 83333, 5, rxConfig->WindowTimeout, false, 0, true, 0, 0, false, rxConfig->RxContinuous ); + } + else + { + modem = MODEM_LORA; + Radio.SetRxConfig( modem, rxConfig->Bandwidth, phyDr, 1, 0, 8, rxConfig->WindowTimeout, false, 0, false, 0, 0, true, rxConfig->RxContinuous ); + } + + if( rxConfig->RepeaterSupport == true ) + { + maxPayload = MaxPayloadOfDatarateRepeaterCN779[dr]; + } + else + { + maxPayload = MaxPayloadOfDatarateCN779[dr]; + } + Radio.SetMaxPayloadLength( modem, maxPayload + LORA_MAC_FRMPAYLOAD_OVERHEAD ); + + *datarate = (uint8_t) dr; + return true; +} + +bool RegionCN779TxConfig( TxConfigParams_t* txConfig, int8_t* txPower, TimerTime_t* txTimeOnAir ) +{ + RadioModems_t modem; + int8_t phyDr = DataratesCN779[txConfig->Datarate]; + int8_t txPowerLimited = LimitTxPower( txConfig->TxPower, Bands[Channels[txConfig->Channel].Band].TxMaxPower, txConfig->Datarate, ChannelsMask ); + uint32_t bandwidth = GetBandwidth( txConfig->Datarate ); + int8_t phyTxPower = 0; + + // Calculate physical TX power + phyTxPower = RegionCommonComputeTxPower( txPowerLimited, txConfig->MaxEirp, txConfig->AntennaGain ); + + // Setup the radio frequency + Radio.SetChannel( Channels[txConfig->Channel].Frequency ); + + if( txConfig->Datarate == DR_7 ) + { // High Speed FSK channel + modem = MODEM_FSK; + Radio.SetTxConfig( modem, phyTxPower, 25000, bandwidth, phyDr * 1000, 0, 5, false, true, 0, 0, false, 3000 ); + } + else + { + modem = MODEM_LORA; + Radio.SetTxConfig( modem, phyTxPower, 0, bandwidth, phyDr, 1, 8, false, true, 0, 0, false, 3000 ); + } + + // Setup maximum payload lenght of the radio driver + Radio.SetMaxPayloadLength( modem, txConfig->PktLen ); + // Get the time-on-air of the next tx frame + *txTimeOnAir = Radio.TimeOnAir( modem, txConfig->PktLen ); + + *txPower = txPowerLimited; + return true; +} + +uint8_t RegionCN779LinkAdrReq( LinkAdrReqParams_t* linkAdrReq, int8_t* drOut, int8_t* txPowOut, uint8_t* nbRepOut, uint8_t* nbBytesParsed ) +{ + uint8_t status = 0x07; + RegionCommonLinkAdrParams_t linkAdrParams; + uint8_t nextIndex = 0; + uint8_t bytesProcessed = 0; + uint16_t chMask = 0; + GetPhyParams_t getPhy; + PhyParam_t phyParam; + RegionCommonLinkAdrReqVerifyParams_t linkAdrVerifyParams; + + while( bytesProcessed < linkAdrReq->PayloadSize ) + { + // Get ADR request parameters + nextIndex = RegionCommonParseLinkAdrReq( &( linkAdrReq->Payload[bytesProcessed] ), &linkAdrParams ); + + if( nextIndex == 0 ) + break; // break loop, since no more request has been found + + // Update bytes processed + bytesProcessed += nextIndex; + + // Revert status, as we only check the last ADR request for the channel mask KO + status = 0x07; + + // Setup temporary channels mask + chMask = linkAdrParams.ChMask; + + // Verify channels mask + if( ( linkAdrParams.ChMaskCtrl == 0 ) && ( chMask == 0 ) ) + { + status &= 0xFE; // Channel mask KO + } + else if( ( ( linkAdrParams.ChMaskCtrl >= 1 ) && ( linkAdrParams.ChMaskCtrl <= 5 )) || + ( linkAdrParams.ChMaskCtrl >= 7 ) ) + { + // RFU + status &= 0xFE; // Channel mask KO + } + else + { + for( uint8_t i = 0; i < CN779_MAX_NB_CHANNELS; i++ ) + { + if( linkAdrParams.ChMaskCtrl == 6 ) + { + if( Channels[i].Frequency != 0 ) + { + chMask |= 1 << i; + } + } + else + { + if( ( ( chMask & ( 1 << i ) ) != 0 ) && + ( Channels[i].Frequency == 0 ) ) + {// Trying to enable an undefined channel + status &= 0xFE; // Channel mask KO + } + } + } + } + } + + // Get the minimum possible datarate + getPhy.Attribute = PHY_MIN_TX_DR; + getPhy.UplinkDwellTime = linkAdrReq->UplinkDwellTime; + phyParam = RegionCN779GetPhyParam( &getPhy ); + + linkAdrVerifyParams.Status = status; + linkAdrVerifyParams.AdrEnabled = linkAdrReq->AdrEnabled; + linkAdrVerifyParams.Datarate = linkAdrParams.Datarate; + linkAdrVerifyParams.TxPower = linkAdrParams.TxPower; + linkAdrVerifyParams.NbRep = linkAdrParams.NbRep; + linkAdrVerifyParams.CurrentDatarate = linkAdrReq->CurrentDatarate; + linkAdrVerifyParams.CurrentTxPower = linkAdrReq->CurrentTxPower; + linkAdrVerifyParams.CurrentNbRep = linkAdrReq->CurrentNbRep; + linkAdrVerifyParams.NbChannels = CN779_MAX_NB_CHANNELS; + linkAdrVerifyParams.ChannelsMask = &chMask; + linkAdrVerifyParams.MinDatarate = ( int8_t )phyParam.Value; + linkAdrVerifyParams.MaxDatarate = CN779_TX_MAX_DATARATE; + linkAdrVerifyParams.Channels = Channels; + linkAdrVerifyParams.MinTxPower = CN779_MIN_TX_POWER; + linkAdrVerifyParams.MaxTxPower = CN779_MAX_TX_POWER; + + // Verify the parameters and update, if necessary + status = RegionCommonLinkAdrReqVerifyParams( &linkAdrVerifyParams, &linkAdrParams.Datarate, &linkAdrParams.TxPower, &linkAdrParams.NbRep ); + + // Update channelsMask if everything is correct + if( status == 0x07 ) + { + // Set the channels mask to a default value + memset( ChannelsMask, 0, sizeof( ChannelsMask ) ); + // Update the channels mask + ChannelsMask[0] = chMask; + } + + // Update status variables + *drOut = linkAdrParams.Datarate; + *txPowOut = linkAdrParams.TxPower; + *nbRepOut = linkAdrParams.NbRep; + *nbBytesParsed = bytesProcessed; + + return status; +} + +uint8_t RegionCN779RxParamSetupReq( RxParamSetupReqParams_t* rxParamSetupReq ) +{ + uint8_t status = 0x07; + + // Verify radio frequency + if( Radio.CheckRfFrequency( rxParamSetupReq->Frequency ) == false ) + { + status &= 0xFE; // Channel frequency KO + } + + // Verify datarate + if( RegionCommonValueInRange( rxParamSetupReq->Datarate, CN779_RX_MIN_DATARATE, CN779_RX_MAX_DATARATE ) == false ) + { + status &= 0xFD; // Datarate KO + } + + // Verify datarate offset + if( RegionCommonValueInRange( rxParamSetupReq->DrOffset, CN779_MIN_RX1_DR_OFFSET, CN779_MAX_RX1_DR_OFFSET ) == false ) + { + status &= 0xFB; // Rx1DrOffset range KO + } + + return status; +} + +uint8_t RegionCN779NewChannelReq( NewChannelReqParams_t* newChannelReq ) +{ + uint8_t status = 0x03; + ChannelAddParams_t channelAdd; + ChannelRemoveParams_t channelRemove; + + if( newChannelReq->NewChannel->Frequency == 0 ) + { + channelRemove.ChannelId = newChannelReq->ChannelId; + + // Remove + if( RegionCN779ChannelsRemove( &channelRemove ) == false ) + { + status &= 0xFC; + } + } + else + { + channelAdd.NewChannel = newChannelReq->NewChannel; + channelAdd.ChannelId = newChannelReq->ChannelId; + + switch( RegionCN779ChannelAdd( &channelAdd ) ) + { + case LORAMAC_STATUS_OK: + { + break; + } + case LORAMAC_STATUS_FREQUENCY_INVALID: + { + status &= 0xFE; + break; + } + case LORAMAC_STATUS_DATARATE_INVALID: + { + status &= 0xFD; + break; + } + case LORAMAC_STATUS_FREQ_AND_DR_INVALID: + { + status &= 0xFC; + break; + } + default: + { + status &= 0xFC; + break; + } + } + } + + return status; +} + +int8_t RegionCN779TxParamSetupReq( TxParamSetupReqParams_t* txParamSetupReq ) +{ + return -1; +} + +uint8_t RegionCN779DlChannelReq( DlChannelReqParams_t* dlChannelReq ) +{ + uint8_t status = 0x03; + + // Verify if the frequency is supported + if( VerifyTxFreq( dlChannelReq->Rx1Frequency ) == false ) + { + status &= 0xFE; + } + + // Verify if an uplink frequency exists + if( Channels[dlChannelReq->ChannelId].Frequency == 0 ) + { + status &= 0xFD; + } + + // Apply Rx1 frequency, if the status is OK + if( status == 0x03 ) + { + Channels[dlChannelReq->ChannelId].Rx1Frequency = dlChannelReq->Rx1Frequency; + } + + return status; +} + +int8_t RegionCN779AlternateDr( AlternateDrParams_t* alternateDr ) +{ + int8_t datarate = 0; + + if( ( alternateDr->NbTrials % 48 ) == 0 ) + { + datarate = DR_0; + } + else if( ( alternateDr->NbTrials % 32 ) == 0 ) + { + datarate = DR_1; + } + else if( ( alternateDr->NbTrials % 24 ) == 0 ) + { + datarate = DR_2; + } + else if( ( alternateDr->NbTrials % 16 ) == 0 ) + { + datarate = DR_3; + } + else if( ( alternateDr->NbTrials % 8 ) == 0 ) + { + datarate = DR_4; + } + else + { + datarate = DR_5; + } + return datarate; +} + +void RegionCN779CalcBackOff( CalcBackOffParams_t* calcBackOff ) +{ + RegionCommonCalcBackOffParams_t calcBackOffParams; + + calcBackOffParams.Channels = Channels; + calcBackOffParams.Bands = Bands; + calcBackOffParams.LastTxIsJoinRequest = calcBackOff->LastTxIsJoinRequest; + calcBackOffParams.Joined = calcBackOff->Joined; + calcBackOffParams.DutyCycleEnabled = calcBackOff->DutyCycleEnabled; + calcBackOffParams.Channel = calcBackOff->Channel; + calcBackOffParams.ElapsedTime = calcBackOff->ElapsedTime; + calcBackOffParams.TxTimeOnAir = calcBackOff->TxTimeOnAir; + + RegionCommonCalcBackOff( &calcBackOffParams ); +} + +bool RegionCN779NextChannel( NextChanParams_t* nextChanParams, uint8_t* channel, TimerTime_t* time, TimerTime_t* aggregatedTimeOff ) +{ + uint8_t nbEnabledChannels = 0; + uint8_t delayTx = 0; + uint8_t enabledChannels[CN779_MAX_NB_CHANNELS] = { 0 }; + TimerTime_t nextTxDelay = 0; + + if( RegionCommonCountChannels( ChannelsMask, 0, 1 ) == 0 ) + { // Reactivate default channels + ChannelsMask[0] |= LC( 1 ) + LC( 2 ) + LC( 3 ); + } + + if( nextChanParams->AggrTimeOff <= TimerGetElapsedTime( nextChanParams->LastAggrTx ) ) + { + // Reset Aggregated time off + *aggregatedTimeOff = 0; + + // Update bands Time OFF + nextTxDelay = RegionCommonUpdateBandTimeOff( nextChanParams->Joined, nextChanParams->DutyCycleEnabled, Bands, CN779_MAX_NB_BANDS ); + + // Search how many channels are enabled + nbEnabledChannels = CountNbOfEnabledChannels( nextChanParams->Joined, nextChanParams->Datarate, + ChannelsMask, Channels, + Bands, enabledChannels, &delayTx ); + } + else + { + delayTx++; + nextTxDelay = nextChanParams->AggrTimeOff - TimerGetElapsedTime( nextChanParams->LastAggrTx ); + } + + if( nbEnabledChannels > 0 ) + { + // We found a valid channel + *channel = enabledChannels[randr( 0, nbEnabledChannels - 1 )]; + + *time = 0; + return true; + } + else + { + if( delayTx > 0 ) + { + // Delay transmission due to AggregatedTimeOff or to a band time off + *time = nextTxDelay; + return true; + } + // Datarate not supported by any channel, restore defaults + ChannelsMask[0] |= LC( 1 ) + LC( 2 ) + LC( 3 ); + *time = 0; + return false; + } +} + +LoRaMacStatus_t RegionCN779ChannelAdd( ChannelAddParams_t* channelAdd ) +{ + uint8_t band = 0; + bool drInvalid = false; + bool freqInvalid = false; + uint8_t id = channelAdd->ChannelId; + + if( id >= CN779_MAX_NB_CHANNELS ) + { + return LORAMAC_STATUS_PARAMETER_INVALID; + } + + // Validate the datarate range + if( RegionCommonValueInRange( channelAdd->NewChannel->DrRange.Fields.Min, CN779_TX_MIN_DATARATE, CN779_TX_MAX_DATARATE ) == false ) + { + drInvalid = true; + } + if( RegionCommonValueInRange( channelAdd->NewChannel->DrRange.Fields.Max, CN779_TX_MIN_DATARATE, CN779_TX_MAX_DATARATE ) == false ) + { + drInvalid = true; + } + if( channelAdd->NewChannel->DrRange.Fields.Min > channelAdd->NewChannel->DrRange.Fields.Max ) + { + drInvalid = true; + } + + // Default channels don't accept all values + if( id < CN779_NUMB_DEFAULT_CHANNELS ) + { + // Validate the datarate range for min: must be DR_0 + if( channelAdd->NewChannel->DrRange.Fields.Min > DR_0 ) + { + drInvalid = true; + } + // Validate the datarate range for max: must be DR_5 <= Max <= TX_MAX_DATARATE + if( RegionCommonValueInRange( channelAdd->NewChannel->DrRange.Fields.Max, DR_5, CN779_TX_MAX_DATARATE ) == false ) + { + drInvalid = true; + } + // We are not allowed to change the frequency + if( channelAdd->NewChannel->Frequency != Channels[id].Frequency ) + { + freqInvalid = true; + } + } + + // Check frequency + if( freqInvalid == false ) + { + if( VerifyTxFreq( channelAdd->NewChannel->Frequency ) == false ) + { + freqInvalid = true; + } + } + + // Check status + if( ( drInvalid == true ) && ( freqInvalid == true ) ) + { + return LORAMAC_STATUS_FREQ_AND_DR_INVALID; + } + if( drInvalid == true ) + { + return LORAMAC_STATUS_DATARATE_INVALID; + } + if( freqInvalid == true ) + { + return LORAMAC_STATUS_FREQUENCY_INVALID; + } + + memcpy( &(Channels[id]), channelAdd->NewChannel, sizeof( Channels[id] ) ); + Channels[id].Band = band; + ChannelsMask[0] |= ( 1 << id ); + return LORAMAC_STATUS_OK; +} + +bool RegionCN779ChannelsRemove( ChannelRemoveParams_t* channelRemove ) +{ + uint8_t id = channelRemove->ChannelId; + + if( id < CN779_NUMB_DEFAULT_CHANNELS ) + { + return false; + } + + // Remove the channel from the list of channels + Channels[id] = ( ChannelParams_t ){ 0, 0, { 0 }, 0 }; + + return RegionCommonChanDisable( ChannelsMask, id, CN779_MAX_NB_CHANNELS ); +} + +void RegionCN779SetContinuousWave( ContinuousWaveParams_t* continuousWave ) +{ + int8_t txPowerLimited = LimitTxPower( continuousWave->TxPower, Bands[Channels[continuousWave->Channel].Band].TxMaxPower, continuousWave->Datarate, ChannelsMask ); + int8_t phyTxPower = 0; + uint32_t frequency = Channels[continuousWave->Channel].Frequency; + + // Calculate physical TX power + phyTxPower = RegionCommonComputeTxPower( txPowerLimited, continuousWave->MaxEirp, continuousWave->AntennaGain ); + + Radio.SetTxContinuousWave( frequency, phyTxPower, continuousWave->Timeout ); +} + +uint8_t RegionCN779ApplyDrOffset( uint8_t downlinkDwellTime, int8_t dr, int8_t drOffset ) +{ + int8_t datarate = dr - drOffset; + + if( datarate < 0 ) + { + datarate = DR_0; + } + return datarate; +} diff --git a/src/mac/region/RegionCN779.h b/src/mac/region/RegionCN779.h new file mode 100755 index 0000000..2183535 --- /dev/null +++ b/src/mac/region/RegionCN779.h @@ -0,0 +1,465 @@ +/*! + * \file RegionCN779.h + * + * \brief Region definition for CN779 + * + * \copyright Revised BSD License, see section \ref LICENSE. + * + * \code + * ______ _ + * / _____) _ | | + * ( (____ _____ ____ _| |_ _____ ____| |__ + * \____ \| ___ | (_ _) ___ |/ ___) _ \ + * _____) ) ____| | | || |_| ____( (___| | | | + * (______/|_____)_|_|_| \__)_____)\____)_| |_| + * (C)2013 Semtech + * + * ___ _____ _ ___ _ _____ ___ ___ ___ ___ + * / __|_ _/_\ / __| |/ / __/ _ \| _ \/ __| __| + * \__ \ | |/ _ \ (__| ' <| _| (_) | / (__| _| + * |___/ |_/_/ \_\___|_|\_\_| \___/|_|_\\___|___| + * embedded.connectivity.solutions=============== + * + * \endcode + * + * \author Miguel Luis ( Semtech ) + * + * \author Gregory Cristian ( Semtech ) + * + * \author Daniel Jaeckle ( STACKFORCE ) + * + * \defgroup REGIONCN779 Region CN779 + * Implementation according to LoRaWAN Specification v1.0.2. + * \{ + */ +#ifndef __REGION_CN779_H__ +#define __REGION_CN779_H__ + +/*! + * LoRaMac maximum number of channels + */ +#define CN779_MAX_NB_CHANNELS 16 + +/*! + * Number of default channels + */ +#define CN779_NUMB_DEFAULT_CHANNELS 3 + +/*! + * Number of channels to apply for the CF list + */ +#define CN779_NUMB_CHANNELS_CF_LIST 5 + +/*! + * Minimal datarate that can be used by the node + */ +#define CN779_TX_MIN_DATARATE DR_0 + +/*! + * Maximal datarate that can be used by the node + */ +#define CN779_TX_MAX_DATARATE DR_7 + +/*! + * Minimal datarate that can be used by the node + */ +#define CN779_RX_MIN_DATARATE DR_0 + +/*! + * Maximal datarate that can be used by the node + */ +#define CN779_RX_MAX_DATARATE DR_7 + +/*! + * Default datarate used by the node + */ +#define CN779_DEFAULT_DATARATE DR_0 + +/*! + * Minimal Rx1 receive datarate offset + */ +#define CN779_MIN_RX1_DR_OFFSET 0 + +/*! + * Maximal Rx1 receive datarate offset + */ +#define CN779_MAX_RX1_DR_OFFSET 5 + +/*! + * Default Rx1 receive datarate offset + */ +#define CN779_DEFAULT_RX1_DR_OFFSET 0 + +/*! + * Minimal Tx output power that can be used by the node + */ +#define CN779_MIN_TX_POWER TX_POWER_5 + +/*! + * Maximal Tx output power that can be used by the node + */ +#define CN779_MAX_TX_POWER TX_POWER_0 + +/*! + * Default Tx output power used by the node + */ +#define CN779_DEFAULT_TX_POWER TX_POWER_0 + +/*! + * Default Max EIRP + */ +#define CN779_DEFAULT_MAX_EIRP 12.15f + +/*! + * Default antenna gain + */ +#define CN779_DEFAULT_ANTENNA_GAIN 2.15f + +/*! + * ADR Ack limit + */ +#define CN779_ADR_ACK_LIMIT 64 + +/*! + * ADR Ack delay + */ +#define CN779_ADR_ACK_DELAY 32 + +/*! + * Enabled or disabled the duty cycle + */ +#define CN779_DUTY_CYCLE_ENABLED 1 + +/*! + * Maximum RX window duration + */ +#define CN779_MAX_RX_WINDOW 3000 + +/*! + * Receive delay 1 + */ +#define CN779_RECEIVE_DELAY1 1000 + +/*! + * Receive delay 2 + */ +#define CN779_RECEIVE_DELAY2 2000 + +/*! + * Join accept delay 1 + */ +#define CN779_JOIN_ACCEPT_DELAY1 5000 + +/*! + * Join accept delay 2 + */ +#define CN779_JOIN_ACCEPT_DELAY2 6000 + +/*! + * Maximum frame counter gap + */ +#define CN779_MAX_FCNT_GAP 16384 + +/*! + * Ack timeout + */ +#define CN779_ACKTIMEOUT 2000 + +/*! + * Random ack timeout limits + */ +#define CN779_ACK_TIMEOUT_RND 1000 + +/*! + * Verification of default datarate + */ +#if ( CN779_DEFAULT_DATARATE > DR_5 ) +#error "A default DR higher than DR_5 may lead to connectivity loss." +#endif + +/*! + * Second reception window channel frequency definition. + */ +#define CN779_RX_WND_2_FREQ 786000000 + +/*! + * Second reception window channel datarate definition. + */ +#define CN779_RX_WND_2_DR DR_0 + +/*! + * LoRaMac maximum number of bands + */ +#define CN779_MAX_NB_BANDS 1 + +/*! + * Band 0 definition + * { DutyCycle, TxMaxPower, LastTxDoneTime, TimeOff } + */ +#define CN779_BAND0 { 100, CN779_MAX_TX_POWER, 0, 0 } // 1.0 % + +/*! + * LoRaMac default channel 1 + * Channel = { Frequency [Hz], RX1 Frequency [Hz], { ( ( DrMax << 4 ) | DrMin ) }, Band } + */ +#define CN779_LC1 { 779500000, 0, { ( ( DR_5 << 4 ) | DR_0 ) }, 0 } +/*! + * LoRaMac default channel 2 + * Channel = { Frequency [Hz], RX1 Frequency [Hz], { ( ( DrMax << 4 ) | DrMin ) }, Band } + */ +#define CN779_LC2 { 779700000, 0, { ( ( DR_5 << 4 ) | DR_0 ) }, 0 } + +/*! + * LoRaMac default channel 3 + * Channel = { Frequency [Hz], RX1 Frequency [Hz], { ( ( DrMax << 4 ) | DrMin ) }, Band } + */ +#define CN779_LC3 { 779900000, 0, { ( ( DR_5 << 4 ) | DR_0 ) }, 0 } + +/*! + * LoRaMac channels which are allowed for the join procedure + */ +#define CN779_JOIN_CHANNELS ( uint16_t )( LC( 1 ) | LC( 2 ) | LC( 3 ) ) + +/*! + * Data rates table definition + */ +static const uint8_t DataratesCN779[] = { 12, 11, 10, 9, 8, 7, 7, 50 }; + +/*! + * Bandwidths table definition in Hz + */ +static const uint32_t BandwidthsCN779[] = { 125000, 125000, 125000, 125000, 125000, 125000, 250000, 0 }; + +/*! + * Maximum payload with respect to the datarate index. Cannot operate with repeater. + */ +static const uint8_t MaxPayloadOfDatarateCN779[] = { 51, 51, 51, 115, 242, 242, 242, 242 }; + +/*! + * Maximum payload with respect to the datarate index. Can operate with repeater. + */ +static const uint8_t MaxPayloadOfDatarateRepeaterCN779[] = { 51, 51, 51, 115, 222, 222, 222, 222 }; + +/*! + * \brief The function gets a value of a specific phy attribute. + * + * \param [IN] getPhy Pointer to the function parameters. + * + * \retval Returns a structure containing the PHY parameter. + */ +PhyParam_t RegionCN779GetPhyParam( GetPhyParams_t* getPhy ); + +/*! + * \brief Updates the last TX done parameters of the current channel. + * + * \param [IN] txDone Pointer to the function parameters. + */ +void RegionCN779SetBandTxDone( SetBandTxDoneParams_t* txDone ); + +/*! + * \brief Initializes the channels masks and the channels. + * + * \param [IN] type Sets the initialization type. + */ +void RegionCN779InitDefaults( InitType_t type ); + +/*! + * \brief Verifies a parameter. + * + * \param [IN] verify Pointer to the function parameters. + * + * \param [IN] type Sets the initialization type. + * + * \retval Returns true, if the parameter is valid. + */ +bool RegionCN779Verify( VerifyParams_t* verify, PhyAttribute_t phyAttribute ); + +/*! + * \brief The function parses the input buffer and sets up the channels of the + * CF list. + * + * \param [IN] applyCFList Pointer to the function parameters. + */ +void RegionCN779ApplyCFList( ApplyCFListParams_t* applyCFList ); + +/*! + * \brief Sets a channels mask. + * + * \param [IN] chanMaskSet Pointer to the function parameters. + * + * \retval Returns true, if the channels mask could be set. + */ +bool RegionCN779ChanMaskSet( ChanMaskSetParams_t* chanMaskSet ); + +/*! + * \brief Calculates the next datarate to set, when ADR is on or off. + * + * \param [IN] adrNext Pointer to the function parameters. + * + * \param [OUT] drOut The calculated datarate for the next TX. + * + * \param [OUT] txPowOut The TX power for the next TX. + * + * \param [OUT] adrAckCounter The calculated ADR acknowledgement counter. + * + * \retval Returns true, if an ADR request should be performed. + */ +bool RegionCN779AdrNext( AdrNextParams_t* adrNext, int8_t* drOut, int8_t* txPowOut, uint32_t* adrAckCounter ); + +/*! + * Computes the Rx window timeout and offset. + * + * \param [IN] datarate Rx window datarate index to be used + * + * \param [IN] minRxSymbols Minimum required number of symbols to detect an Rx frame. + * + * \param [IN] rxError System maximum timing error of the receiver. In milliseconds + * The receiver will turn on in a [-rxError : +rxError] ms + * interval around RxOffset + * + * \param [OUT]rxConfigParams Returns updated WindowTimeout and WindowOffset fields. + */ +void RegionCN779ComputeRxWindowParameters( int8_t datarate, uint8_t minRxSymbols, uint32_t rxError, RxConfigParams_t *rxConfigParams ); + +/*! + * \brief Configuration of the RX windows. + * + * \param [IN] rxConfig Pointer to the function parameters. + * + * \param [OUT] datarate The datarate index which was set. + * + * \retval Returns true, if the configuration was applied successfully. + */ +bool RegionCN779RxConfig( RxConfigParams_t* rxConfig, int8_t* datarate ); + +/*! + * \brief TX configuration. + * + * \param [IN] txConfig Pointer to the function parameters. + * + * \param [OUT] txPower The tx power index which was set. + * + * \param [OUT] txTimeOnAir The time-on-air of the frame. + * + * \retval Returns true, if the configuration was applied successfully. + */ +bool RegionCN779TxConfig( TxConfigParams_t* txConfig, int8_t* txPower, TimerTime_t* txTimeOnAir ); + +/*! + * \brief The function processes a Link ADR Request. + * + * \param [IN] linkAdrReq Pointer to the function parameters. + * + * \retval Returns the status of the operation, according to the LoRaMAC specification. + */ +uint8_t RegionCN779LinkAdrReq( LinkAdrReqParams_t* linkAdrReq, int8_t* drOut, int8_t* txPowOut, uint8_t* nbRepOut, uint8_t* nbBytesParsed ); + +/*! + * \brief The function processes a RX Parameter Setup Request. + * + * \param [IN] rxParamSetupReq Pointer to the function parameters. + * + * \retval Returns the status of the operation, according to the LoRaMAC specification. + */ +uint8_t RegionCN779RxParamSetupReq( RxParamSetupReqParams_t* rxParamSetupReq ); + +/*! + * \brief The function processes a Channel Request. + * + * \param [IN] newChannelReq Pointer to the function parameters. + * + * \retval Returns the status of the operation, according to the LoRaMAC specification. + */ +uint8_t RegionCN779NewChannelReq( NewChannelReqParams_t* newChannelReq ); + +/*! + * \brief The function processes a TX ParamSetup Request. + * + * \param [IN] txParamSetupReq Pointer to the function parameters. + * + * \retval Returns the status of the operation, according to the LoRaMAC specification. + * Returns -1, if the functionality is not implemented. In this case, the end node + * shall not process the command. + */ +int8_t RegionCN779TxParamSetupReq( TxParamSetupReqParams_t* txParamSetupReq ); + +/*! + * \brief The function processes a DlChannel Request. + * + * \param [IN] dlChannelReq Pointer to the function parameters. + * + * \retval Returns the status of the operation, according to the LoRaMAC specification. + */ +uint8_t RegionCN779DlChannelReq( DlChannelReqParams_t* dlChannelReq ); + +/*! + * \brief Alternates the datarate of the channel for the join request. + * + * \param [IN] alternateDr Pointer to the function parameters. + * + * \retval Datarate to apply. + */ +int8_t RegionCN779AlternateDr( AlternateDrParams_t* alternateDr ); + +/*! + * \brief Calculates the back-off time. + * + * \param [IN] calcBackOff Pointer to the function parameters. + */ +void RegionCN779CalcBackOff( CalcBackOffParams_t* calcBackOff ); + +/*! + * \brief Searches and set the next random available channel + * + * \param [OUT] channel Next channel to use for TX. + * + * \param [OUT] time Time to wait for the next transmission according to the duty + * cycle. + * + * \param [OUT] aggregatedTimeOff Updates the aggregated time off. + * + * \retval Function status [1: OK, 0: Unable to find a channel on the current datarate] + */ +bool RegionCN779NextChannel( NextChanParams_t* nextChanParams, uint8_t* channel, TimerTime_t* time, TimerTime_t* aggregatedTimeOff ); + +/*! + * \brief Adds a channel. + * + * \param [IN] channelAdd Pointer to the function parameters. + * + * \retval Status of the operation. + */ +LoRaMacStatus_t RegionCN779ChannelAdd( ChannelAddParams_t* channelAdd ); + +/*! + * \brief Removes a channel. + * + * \param [IN] channelRemove Pointer to the function parameters. + * + * \retval Returns true, if the channel was removed successfully. + */ +bool RegionCN779ChannelsRemove( ChannelRemoveParams_t* channelRemove ); + +/*! + * \brief Sets the radio into continuous wave mode. + * + * \param [IN] continuousWave Pointer to the function parameters. + */ +void RegionCN779SetContinuousWave( ContinuousWaveParams_t* continuousWave ); + +/*! + * \brief Computes new datarate according to the given offset + * + * \param [IN] downlinkDwellTime Downlink dwell time configuration. 0: No limit, 1: 400ms + * + * \param [IN] dr Current datarate + * + * \param [IN] drOffset Offset to be applied + * + * \retval newDr Computed datarate. + */ +uint8_t RegionCN779ApplyDrOffset( uint8_t downlinkDwellTime, int8_t dr, int8_t drOffset ); + +/*! \} defgroup REGIONCN779 */ + +#endif // __REGION_CN779_H__ diff --git a/src/mac/region/RegionCommon.c b/src/mac/region/RegionCommon.c new file mode 100755 index 0000000..fb0b139 --- /dev/null +++ b/src/mac/region/RegionCommon.c @@ -0,0 +1,362 @@ +/* + / _____) _ | | +( (____ _____ ____ _| |_ _____ ____| |__ + \____ \| ___ | (_ _) ___ |/ ___) _ \ + _____) ) ____| | | || |_| ____( (___| | | | +(______/|_____)_|_|_| \__)_____)\____)_| |_| + (C)2013 Semtech + ___ _____ _ ___ _ _____ ___ ___ ___ ___ +/ __|_ _/_\ / __| |/ / __/ _ \| _ \/ __| __| +\__ \ | |/ _ \ (__| ' <| _| (_) | / (__| _| +|___/ |_/_/ \_\___|_|\_\_| \___/|_|_\\___|___| +embedded.connectivity.solutions=============== + +Description: LoRa MAC common region implementation + +License: Revised BSD License, see LICENSE.TXT file include in the project + +Maintainer: Miguel Luis ( Semtech ), Gregory Cristian ( Semtech ) and Daniel Jaeckle ( STACKFORCE ) +*/ + +#include +#include +#include +#include + +#include "timer.h" +#include "utilities.h" +#include "LoRaMac.h" +#include "RegionCommon.h" + + + +#define BACKOFF_DC_1_HOUR 100 +#define BACKOFF_DC_10_HOURS 1000 +#define BACKOFF_DC_24_HOURS 10000 + + + +static uint8_t CountChannels( uint16_t mask, uint8_t nbBits ) +{ + uint8_t nbActiveBits = 0; + + for( uint8_t j = 0; j < nbBits; j++ ) + { + if( ( mask & ( 1 << j ) ) == ( 1 << j ) ) + { + nbActiveBits++; + } + } + return nbActiveBits; +} + + + +uint16_t RegionCommonGetJoinDc( TimerTime_t elapsedTime ) +{ + uint16_t dutyCycle = 0; + + if( elapsedTime < 3600000 ) + { + dutyCycle = BACKOFF_DC_1_HOUR; + } + else if( elapsedTime < ( 3600000 + 36000000 ) ) + { + dutyCycle = BACKOFF_DC_10_HOURS; + } + else + { + dutyCycle = BACKOFF_DC_24_HOURS; + } + return dutyCycle; +} + +bool RegionCommonChanVerifyDr( uint8_t nbChannels, uint16_t* channelsMask, int8_t dr, int8_t minDr, int8_t maxDr, ChannelParams_t* channels ) +{ + if( RegionCommonValueInRange( dr, minDr, maxDr ) == 0 ) + { + return false; + } + + for( uint8_t i = 0, k = 0; i < nbChannels; i += 16, k++ ) + { + for( uint8_t j = 0; j < 16; j++ ) + { + if( ( ( channelsMask[k] & ( 1 << j ) ) != 0 ) ) + {// Check datarate validity for enabled channels + if( RegionCommonValueInRange( dr, ( channels[i + j].DrRange.Fields.Min & 0x0F ), + ( channels[i + j].DrRange.Fields.Max & 0x0F ) ) == 1 ) + { + // At least 1 channel has been found we can return OK. + return true; + } + } + } + } + return false; +} + +uint8_t RegionCommonValueInRange( int8_t value, int8_t min, int8_t max ) +{ + if( ( value >= min ) && ( value <= max ) ) + { + return 1; + } + return 0; +} + +bool RegionCommonChanDisable( uint16_t* channelsMask, uint8_t id, uint8_t maxChannels ) +{ + uint8_t index = id / 16; + + if( ( index > ( maxChannels / 16 ) ) || ( id >= maxChannels ) ) + { + return false; + } + + // Deactivate channel + channelsMask[index] &= ~( 1 << ( id % 16 ) ); + + return true; +} + +uint8_t RegionCommonCountChannels( uint16_t* channelsMask, uint8_t startIdx, uint8_t stopIdx ) +{ + uint8_t nbChannels = 0; + + if( channelsMask == NULL ) + { + return 0; + } + + for( uint8_t i = startIdx; i < stopIdx; i++ ) + { + nbChannels += CountChannels( channelsMask[i], 16 ); + } + + return nbChannels; +} + +void RegionCommonChanMaskCopy( uint16_t* channelsMaskDest, uint16_t* channelsMaskSrc, uint8_t len ) +{ + if( ( channelsMaskDest != NULL ) && ( channelsMaskSrc != NULL ) ) + { + for( uint8_t i = 0; i < len; i++ ) + { + channelsMaskDest[i] = channelsMaskSrc[i]; + } + } +} + +void RegionCommonSetBandTxDone( bool joined, Band_t* band, TimerTime_t lastTxDone ) +{ + if( joined == true ) + { + band->LastTxDoneTime = lastTxDone; + } + else + { + band->LastTxDoneTime = lastTxDone; + band->LastJoinTxDoneTime = lastTxDone; + } +} + +TimerTime_t RegionCommonUpdateBandTimeOff( bool joined, bool dutyCycle, Band_t* bands, uint8_t nbBands ) +{ + TimerTime_t nextTxDelay = ( TimerTime_t )( -1 ); + + // Update bands Time OFF + for( uint8_t i = 0; i < nbBands; i++ ) + { + if( joined == false ) + { + uint32_t txDoneTime = MAX( TimerGetElapsedTime( bands[i].LastJoinTxDoneTime ), + ( dutyCycle == true ) ? TimerGetElapsedTime( bands[i].LastTxDoneTime ) : 0 ); + + if( bands[i].TimeOff <= txDoneTime ) + { + bands[i].TimeOff = 0; + } + if( bands[i].TimeOff != 0 ) + { + nextTxDelay = MIN( bands[i].TimeOff - txDoneTime, nextTxDelay ); + } + } + else + { + if( dutyCycle == true ) + { + if( bands[i].TimeOff <= TimerGetElapsedTime( bands[i].LastTxDoneTime ) ) + { + bands[i].TimeOff = 0; + } + if( bands[i].TimeOff != 0 ) + { + nextTxDelay = MIN( bands[i].TimeOff - TimerGetElapsedTime( bands[i].LastTxDoneTime ), + nextTxDelay ); + } + } + else + { + nextTxDelay = 0; + bands[i].TimeOff = 0; + } + } + } + return nextTxDelay; +} + +uint8_t RegionCommonParseLinkAdrReq( uint8_t* payload, RegionCommonLinkAdrParams_t* linkAdrParams ) +{ + uint8_t retIndex = 0; + + if( payload[0] == SRV_MAC_LINK_ADR_REQ ) + { + // Parse datarate and tx power + linkAdrParams->Datarate = payload[1]; + linkAdrParams->TxPower = linkAdrParams->Datarate & 0x0F; + linkAdrParams->Datarate = ( linkAdrParams->Datarate >> 4 ) & 0x0F; + // Parse ChMask + linkAdrParams->ChMask = ( uint16_t )payload[2]; + linkAdrParams->ChMask |= ( uint16_t )payload[3] << 8; + // Parse ChMaskCtrl and nbRep + linkAdrParams->NbRep = payload[4]; + linkAdrParams->ChMaskCtrl = ( linkAdrParams->NbRep >> 4 ) & 0x07; + linkAdrParams->NbRep &= 0x0F; + + // LinkAdrReq has 4 bytes length + 1 byte CMD + retIndex = 5; + } + return retIndex; +} + +uint8_t RegionCommonLinkAdrReqVerifyParams( RegionCommonLinkAdrReqVerifyParams_t* verifyParams, int8_t* dr, int8_t* txPow, uint8_t* nbRep ) +{ + uint8_t status = verifyParams->Status; + int8_t datarate = verifyParams->Datarate; + int8_t txPower = verifyParams->TxPower; + int8_t nbRepetitions = verifyParams->NbRep; + + // Handle the case when ADR is off. + if( verifyParams->AdrEnabled == false ) + { + // When ADR is off, we are allowed to change the channels mask and the NbRep, + // if the datarate and the TX power of the LinkAdrReq are set to 0x0F. + if( ( verifyParams->Datarate != 0x0F ) || ( verifyParams->TxPower != 0x0F ) ) + { + status = 0; + nbRepetitions = verifyParams->CurrentNbRep; + } + // Get the current datarate and tx power + datarate = verifyParams->CurrentDatarate; + txPower = verifyParams->CurrentTxPower; + } + + if( status != 0 ) + { + // Verify datarate. The variable phyParam. Value contains the minimum allowed datarate. + if( RegionCommonChanVerifyDr( verifyParams->NbChannels, verifyParams->ChannelsMask, datarate, + verifyParams->MinDatarate, verifyParams->MaxDatarate, verifyParams->Channels ) == false ) + { + status &= 0xFD; // Datarate KO + } + + // Verify tx power + if( RegionCommonValueInRange( txPower, verifyParams->MaxTxPower, verifyParams->MinTxPower ) == 0 ) + { + // Verify if the maximum TX power is exceeded + if( verifyParams->MaxTxPower > txPower ) + { // Apply maximum TX power. Accept TX power. + txPower = verifyParams->MaxTxPower; + } + else + { + status &= 0xFB; // TxPower KO + } + } + } + + // If the status is ok, verify the NbRep + if( status == 0x07 ) + { + if( nbRepetitions == 0 ) + { // Keep the current one + nbRepetitions = verifyParams->CurrentNbRep; + } + } + + // Apply changes + *dr = datarate; + *txPow = txPower; + *nbRep = nbRepetitions; + + return status; +} + +double RegionCommonComputeSymbolTimeLoRa( uint8_t phyDr, uint32_t bandwidth ) +{ + return ( ( double )( 1 << phyDr ) / ( double )bandwidth ) * 1000; +} + +double RegionCommonComputeSymbolTimeFsk( uint8_t phyDr ) +{ + return ( 8.0 / ( double )phyDr ); // 1 symbol equals 1 byte +} + +void RegionCommonComputeRxWindowParameters( double tSymbol, uint8_t minRxSymbols, uint32_t rxError, uint32_t wakeUpTime, uint32_t* windowTimeout, int32_t* windowOffset ) +{ + *windowTimeout = MAX( ( uint32_t )ceil( ( ( 2 * minRxSymbols - 8 ) * tSymbol + 2 * rxError ) / tSymbol ), minRxSymbols ); // Computed number of symbols + *windowOffset = ( int32_t )ceil( ( 4.0 * tSymbol ) - ( ( *windowTimeout * tSymbol ) / 2.0 ) - wakeUpTime ); +} + +int8_t RegionCommonComputeTxPower( int8_t txPowerIndex, float maxEirp, float antennaGain ) +{ + int8_t phyTxPower = 0; + + phyTxPower = ( int8_t )floor( ( maxEirp - ( txPowerIndex * 2U ) ) - antennaGain ); + + return phyTxPower; +} + +void RegionCommonCalcBackOff( RegionCommonCalcBackOffParams_t* calcBackOffParams ) +{ + uint8_t bandIdx = calcBackOffParams->Channels[calcBackOffParams->Channel].Band; + uint16_t dutyCycle = calcBackOffParams->Bands[bandIdx].DCycle; + uint16_t joinDutyCycle = 0; + + // Reset time-off to initial value. + calcBackOffParams->Bands[bandIdx].TimeOff = 0; + + if( calcBackOffParams->Joined == false ) + { + // Get the join duty cycle + joinDutyCycle = RegionCommonGetJoinDc( calcBackOffParams->ElapsedTime ); + // Apply the most restricting duty cycle + dutyCycle = MAX( dutyCycle, joinDutyCycle ); + // Reset the timeoff if the last frame was not a join request and when the duty cycle is not enabled + if( ( calcBackOffParams->DutyCycleEnabled == false ) && ( calcBackOffParams->LastTxIsJoinRequest == false ) ) + { + // This is the case when the duty cycle is off and the last uplink frame was not a join. + // This could happen in case of a rejoin, e.g. in compliance test mode. + // In this special case we have to set the time off to 0, since the join duty cycle shall only + // be applied after the first join request. + calcBackOffParams->Bands[bandIdx].TimeOff = 0; + } + else + { + // Apply band time-off. + calcBackOffParams->Bands[bandIdx].TimeOff = calcBackOffParams->TxTimeOnAir * dutyCycle - calcBackOffParams->TxTimeOnAir; + } + } + else + { + if( calcBackOffParams->DutyCycleEnabled == true ) + { + calcBackOffParams->Bands[bandIdx].TimeOff = calcBackOffParams->TxTimeOnAir * dutyCycle - calcBackOffParams->TxTimeOnAir; + } + else + { + calcBackOffParams->Bands[bandIdx].TimeOff = 0; + } + } +} diff --git a/src/mac/region/RegionCommon.h b/src/mac/region/RegionCommon.h new file mode 100755 index 0000000..1aeb381 --- /dev/null +++ b/src/mac/region/RegionCommon.h @@ -0,0 +1,367 @@ +/*! + * \file RegionCommon.h + * + * \brief Region independent implementations which are common to all regions. + * + * \copyright Revised BSD License, see section \ref LICENSE. + * + * \code + * ______ _ + * / _____) _ | | + * ( (____ _____ ____ _| |_ _____ ____| |__ + * \____ \| ___ | (_ _) ___ |/ ___) _ \ + * _____) ) ____| | | || |_| ____( (___| | | | + * (______/|_____)_|_|_| \__)_____)\____)_| |_| + * (C)2013 Semtech + * + * ___ _____ _ ___ _ _____ ___ ___ ___ ___ + * / __|_ _/_\ / __| |/ / __/ _ \| _ \/ __| __| + * \__ \ | |/ _ \ (__| ' <| _| (_) | / (__| _| + * |___/ |_/_/ \_\___|_|\_\_| \___/|_|_\\___|___| + * embedded.connectivity.solutions=============== + * + * \endcode + * + * \author Miguel Luis ( Semtech ) + * + * \author Gregory Cristian ( Semtech ) + * + * \author Daniel Jaeckle ( STACKFORCE ) + * + * \defgroup REGIONCOMMON Common region implementation + * Region independent implementations which are common to all regions. + * \{ + */ +#ifndef __REGIONCOMMON_H__ +#define __REGIONCOMMON_H__ + +typedef struct sRegionCommonLinkAdrParams +{ + /*! + * Number of repetitions. + */ + uint8_t NbRep; + /*! + * Datarate. + */ + int8_t Datarate; + /*! + * Tx power. + */ + int8_t TxPower; + /*! + * Channels mask control field. + */ + uint8_t ChMaskCtrl; + /*! + * Channels mask field. + */ + uint16_t ChMask; +}RegionCommonLinkAdrParams_t; + +typedef struct sRegionCommonLinkAdrReqVerifyParams +{ + /*! + * The current status of the AdrLinkRequest. + */ + uint8_t Status; + /*! + * Set to true, if ADR is enabled. + */ + bool AdrEnabled; + /*! + * The datarate the AdrLinkRequest wants to set. + */ + int8_t Datarate; + /*! + * The TX power the AdrLinkRequest wants to set. + */ + int8_t TxPower; + /*! + * The number of repetitions the AdrLinkRequest wants to set. + */ + uint8_t NbRep; + /*! + * The current datarate the node is using. + */ + int8_t CurrentDatarate; + /*! + * The current TX power the node is using. + */ + int8_t CurrentTxPower; + /*! + * The current number of repetitions the node is using. + */ + int8_t CurrentNbRep; + /*! + * The number of channels. + */ + uint8_t NbChannels; + /*! + * Pointer to the first element of the channels mask. + */ + uint16_t* ChannelsMask; + /*! + * The minimum possible datarate. + */ + int8_t MinDatarate; + /*! + * The maximum possible datarate. + */ + int8_t MaxDatarate; + /*! + * Pointer to the channels. + */ + ChannelParams_t* Channels; + /*! + * The minimum possible TX power. + */ + int8_t MinTxPower; + /*! + * The maximum possible TX power. + */ + int8_t MaxTxPower; +}RegionCommonLinkAdrReqVerifyParams_t; + +typedef struct sRegionCommonCalcBackOffParams +{ + /*! + * A pointer to region specific channels. + */ + ChannelParams_t* Channels; + /*! + * A pointer to region specific bands. + */ + Band_t* Bands; + /*! + * Set to true, if the last uplink was a join request. + */ + bool LastTxIsJoinRequest; + /*! + * Set to true, if the node is joined. + */ + bool Joined; + /*! + * Set to true, if the duty cycle is enabled. + */ + bool DutyCycleEnabled; + /*! + * The current channel. + */ + uint8_t Channel; + /*! + * The elapsed time since initialization. + */ + TimerTime_t ElapsedTime; + /*! + * The time on air of the last Tx frame. + */ + TimerTime_t TxTimeOnAir; +}RegionCommonCalcBackOffParams_t; + +/*! + * \brief Calculates the join duty cycle. + * This is a generic function and valid for all regions. + * + * \param [IN] elapsedTime Elapsed time since the start of the device. + * + * \retval Duty cycle restriction. + */ +uint16_t RegionCommonGetJoinDc( TimerTime_t elapsedTime ); + +/*! + * \brief Verifies, if a value is in a given range. + * This is a generic function and valid for all regions. + * + * \param [IN] value Value to verify, if it is in range. + * + * \param [IN] min Minimum possible value. + * + * \param [IN] max Maximum possible value. + * + * \retval Returns 1 if the value is in range, otherwise 0. + */ +uint8_t RegionCommonValueInRange( int8_t value, int8_t min, int8_t max ); + +/*! + * \brief Verifies, if a datarate is available on an active channel. + * This is a generic function and valid for all regions. + * + * \param [IN] nbChannels Number of channels. + * + * \param [IN] channelsMask The channels mask of the region. + * + * \param [IN] dr The datarate to verify. + * + * \param [IN] minDr Minimum datarate. + * + * \param [IN] maxDr Maximum datarate. + * + * \param [IN] channels The channels of the region. + * + * \retval Returns true if the datarate is supported, false if not. + */ +bool RegionCommonChanVerifyDr( uint8_t nbChannels, uint16_t* channelsMask, int8_t dr, + int8_t minDr, int8_t maxDr, ChannelParams_t* channels ); + +/*! + * \brief Disables a channel in a given channels mask. + * This is a generic function and valid for all regions. + * + * \param [IN] channelsMask The channels mask of the region. + * + * \param [IN] id The id of the channels mask to disable. + * + * \param [IN] maxChannels Maximum number of channels. + * + * \retval Returns true if the channel could be disabled, false if not. + */ +bool RegionCommonChanDisable( uint16_t* channelsMask, uint8_t id, uint8_t maxChannels ); + +/*! + * \brief Counts the number of active channels in a given channels mask. + * This is a generic function and valid for all regions. + * + * \param [IN] channelsMask The channels mask of the region. + * + * \param [IN] startIdx Start index. + * + * \param [IN] stopIdx Stop index ( the channels of this index will not be counted ). + * + * \retval Returns the number of active channels. + */ +uint8_t RegionCommonCountChannels( uint16_t* channelsMask, uint8_t startIdx, uint8_t stopIdx ); + +/*! + * \brief Copy a channels mask. + * This is a generic function and valid for all regions. + * + * \param [IN] channelsMaskDest The destination channels mask. + * + * \param [IN] channelsMaskSrc The source channels mask. + * + * \param [IN] len The index length to copy. + */ +void RegionCommonChanMaskCopy( uint16_t* channelsMaskDest, uint16_t* channelsMaskSrc, uint8_t len ); + +/*! + * \brief Sets the last tx done property. + * This is a generic function and valid for all regions. + * + * \param [IN] joined Set to true, if the node has joined the network + * + * \param [IN] band The band to be updated. + * + * \param [IN] lastTxDone The time of the last TX done. + */ +void RegionCommonSetBandTxDone( bool joined, Band_t* band, TimerTime_t lastTxDone ); + +/*! + * \brief Updates the time-offs of the bands. + * This is a generic function and valid for all regions. + * + * \param [IN] joined Set to true, if the node has joined the network + * + * \param [IN] dutyCycle Set to true, if the duty cycle is enabled. + * + * \param [IN] bands A pointer to the bands. + * + * \param [IN] nbBands The number of bands available. + * + * \retval Returns the time which must be waited to perform the next uplink. + */ +TimerTime_t RegionCommonUpdateBandTimeOff( bool joined, bool dutyCycle, Band_t* bands, uint8_t nbBands ); + +/*! + * \brief Parses the parameter of an LinkAdrRequest. + * This is a generic function and valid for all regions. + * + * \param [IN] payload Pointer to the payload containing the MAC commands. The payload + * must contain the CMD identifier, following by the parameters. + * + * \param [OUT] parseLinkAdr The function fills the structure with the ADR parameters. + * + * \retval Returns the length of the ADR request, if a request was found. Otherwise, the + * function returns 0. + */ +uint8_t RegionCommonParseLinkAdrReq( uint8_t* payload, RegionCommonLinkAdrParams_t* parseLinkAdr ); + +/*! + * \brief Verifies and updates the datarate, the TX power and the number of repetitions + * of a LinkAdrRequest. This depends on the configuration of ADR also. + * + * \param [IN] verifyParams Pointer to a structure containing input parameters. + * + * \param [OUT] dr The updated datarate. + * + * \param [OUT] txPow The updated TX power. + * + * \param [OUT] nbRep The updated number of repetitions. + * + * \retval Returns the status according to the LinkAdrRequest definition. + */ +uint8_t RegionCommonLinkAdrReqVerifyParams( RegionCommonLinkAdrReqVerifyParams_t* verifyParams, int8_t* dr, int8_t* txPow, uint8_t* nbRep ); + +/*! + * \brief Computes the symbol time for LoRa modulation. + * + * \param [IN] phyDr Physical datarate to use. + * + * \param [IN] bandwidth Bandwidth to use. + * + * \retval Returns the symbol time. + */ +double RegionCommonComputeSymbolTimeLoRa( uint8_t phyDr, uint32_t bandwidth ); + +/*! + * \brief Computes the symbol time for FSK modulation. + * + * \param [IN] phyDr Physical datarate to use. + * + * \param [IN] bandwidth Bandwidth to use. + * + * \retval Returns the symbol time. + */ +double RegionCommonComputeSymbolTimeFsk( uint8_t phyDr ); + +/*! + * \brief Computes the RX window timeout and the RX window offset. + * + * \param [IN] tSymbol Symbol timeout. + * + * \param [IN] minRxSymbols Minimum required number of symbols to detect an Rx frame. + * + * \param [IN] rxError System maximum timing error of the receiver. In milliseconds + * The receiver will turn on in a [-rxError : +rxError] ms interval around RxOffset. + * + * \param [IN] wakeUpTime Wakeup time of the system. + * + * \param [OUT] windowTimeout RX window timeout. + * + * \param [OUT] windowOffset RX window time offset to be applied to the RX delay. + */ +void RegionCommonComputeRxWindowParameters( double tSymbol, uint8_t minRxSymbols, uint32_t rxError, uint32_t wakeUpTime, uint32_t* windowTimeout, int32_t* windowOffset ); + +/*! + * \brief Computes the txPower, based on the max EIRP and the antenna gain. + * + * \param [IN] txPower TX power index. + * + * \param [IN] maxEirp Maximum EIRP. + * + * \param [IN] antennaGain Antenna gain. + * + * \retval Returns the physical TX power. + */ +int8_t RegionCommonComputeTxPower( int8_t txPowerIndex, float maxEirp, float antennaGain ); + +/*! + * \brief Calculates the duty cycle for the current band. + * + * \param [IN] calcBackOffParams A pointer to the input parameters. + */ +void RegionCommonCalcBackOff( RegionCommonCalcBackOffParams_t* calcBackOffParams ); + +/*! \} defgroup REGIONCOMMON */ + +#endif // __REGIONCOMMON_H__ diff --git a/src/mac/region/RegionEU433.c b/src/mac/region/RegionEU433.c new file mode 100755 index 0000000..5446c51 --- /dev/null +++ b/src/mac/region/RegionEU433.c @@ -0,0 +1,1045 @@ +/* + / _____) _ | | +( (____ _____ ____ _| |_ _____ ____| |__ + \____ \| ___ | (_ _) ___ |/ ___) _ \ + _____) ) ____| | | || |_| ____( (___| | | | +(______/|_____)_|_|_| \__)_____)\____)_| |_| + (C)2013 Semtech + ___ _____ _ ___ _ _____ ___ ___ ___ ___ +/ __|_ _/_\ / __| |/ / __/ _ \| _ \/ __| __| +\__ \ | |/ _ \ (__| ' <| _| (_) | / (__| _| +|___/ |_/_/ \_\___|_|\_\_| \___/|_|_\\___|___| +embedded.connectivity.solutions=============== + +Description: LoRa MAC region EU433 implementation + +License: Revised BSD License, see LICENSE.TXT file include in the project + +Maintainer: Miguel Luis ( Semtech ), Gregory Cristian ( Semtech ) and Daniel Jaeckle ( STACKFORCE ) +*/ +#include +#include +#include +#include + +#include "board.h" +#include "LoRaMac.h" + +#include "utilities.h" + +#include "Region.h" +#include "RegionCommon.h" +#include "RegionEU433.h" + +// Definitions +#define CHANNELS_MASK_SIZE 1 + +// Global attributes +/*! + * LoRaMAC channels + */ +static ChannelParams_t Channels[EU433_MAX_NB_CHANNELS]; + +/*! + * LoRaMac bands + */ +static Band_t Bands[EU433_MAX_NB_BANDS] = +{ + EU433_BAND0 +}; + +/*! + * LoRaMac channels mask + */ +static uint16_t ChannelsMask[CHANNELS_MASK_SIZE]; + +/*! + * LoRaMac channels default mask + */ +static uint16_t ChannelsDefaultMask[CHANNELS_MASK_SIZE]; + +// Static functions +static int8_t GetNextLowerTxDr( int8_t dr, int8_t minDr ) +{ + uint8_t nextLowerDr = 0; + + if( dr == minDr ) + { + nextLowerDr = minDr; + } + else + { + nextLowerDr = dr - 1; + } + return nextLowerDr; +} + +static uint32_t GetBandwidth( uint32_t drIndex ) +{ + switch( BandwidthsEU433[drIndex] ) + { + default: + case 125000: + return 0; + case 250000: + return 1; + case 500000: + return 2; + } +} + +static int8_t LimitTxPower( int8_t txPower, int8_t maxBandTxPower, int8_t datarate, uint16_t* channelsMask ) +{ + int8_t txPowerResult = txPower; + + // Limit tx power to the band max + txPowerResult = MAX( txPower, maxBandTxPower ); + + return txPowerResult; +} + +static bool VerifyTxFreq( uint32_t freq ) +{ + // Check radio driver support + if( Radio.CheckRfFrequency( freq ) == false ) + { + return false; + } + + if( ( freq < 433175000 ) || ( freq > 434665000 ) ) + { + return false; + } + return true; +} + +static uint8_t CountNbOfEnabledChannels( bool joined, uint8_t datarate, uint16_t* channelsMask, ChannelParams_t* channels, Band_t* bands, uint8_t* enabledChannels, uint8_t* delayTx ) +{ + uint8_t nbEnabledChannels = 0; + uint8_t delayTransmission = 0; + + for( uint8_t i = 0, k = 0; i < EU433_MAX_NB_CHANNELS; i += 16, k++ ) + { + for( uint8_t j = 0; j < 16; j++ ) + { + if( ( channelsMask[k] & ( 1 << j ) ) != 0 ) + { + if( channels[i + j].Frequency == 0 ) + { // Check if the channel is enabled + continue; + } + if( joined == false ) + { + if( ( EU433_JOIN_CHANNELS & ( 1 << j ) ) == 0 ) + { + continue; + } + } + if( RegionCommonValueInRange( datarate, channels[i + j].DrRange.Fields.Min, + channels[i + j].DrRange.Fields.Max ) == false ) + { // Check if the current channel selection supports the given datarate + continue; + } + if( bands[channels[i + j].Band].TimeOff > 0 ) + { // Check if the band is available for transmission + delayTransmission++; + continue; + } + enabledChannels[nbEnabledChannels++] = i + j; + } + } + } + + *delayTx = delayTransmission; + return nbEnabledChannels; +} + +PhyParam_t RegionEU433GetPhyParam( GetPhyParams_t* getPhy ) +{ + PhyParam_t phyParam = { 0 }; + + switch( getPhy->Attribute ) + { + case PHY_MIN_RX_DR: + { + phyParam.Value = EU433_RX_MIN_DATARATE; + break; + } + case PHY_MIN_TX_DR: + { + phyParam.Value = EU433_TX_MIN_DATARATE; + break; + } + case PHY_DEF_TX_DR: + { + phyParam.Value = EU433_DEFAULT_DATARATE; + break; + } + case PHY_NEXT_LOWER_TX_DR: + { + phyParam.Value = GetNextLowerTxDr( getPhy->Datarate, EU433_TX_MIN_DATARATE ); + break; + } + case PHY_DEF_TX_POWER: + { + phyParam.Value = EU433_DEFAULT_TX_POWER; + break; + } + case PHY_MAX_PAYLOAD: + { + phyParam.Value = MaxPayloadOfDatarateEU433[getPhy->Datarate]; + break; + } + case PHY_MAX_PAYLOAD_REPEATER: + { + phyParam.Value = MaxPayloadOfDatarateRepeaterEU433[getPhy->Datarate]; + break; + } + case PHY_DUTY_CYCLE: + { + phyParam.Value = EU433_DUTY_CYCLE_ENABLED; + break; + } + case PHY_MAX_RX_WINDOW: + { + phyParam.Value = EU433_MAX_RX_WINDOW; + break; + } + case PHY_RECEIVE_DELAY1: + { + phyParam.Value = EU433_RECEIVE_DELAY1; + break; + } + case PHY_RECEIVE_DELAY2: + { + phyParam.Value = EU433_RECEIVE_DELAY2; + break; + } + case PHY_JOIN_ACCEPT_DELAY1: + { + phyParam.Value = EU433_JOIN_ACCEPT_DELAY1; + break; + } + case PHY_JOIN_ACCEPT_DELAY2: + { + phyParam.Value = EU433_JOIN_ACCEPT_DELAY2; + break; + } + case PHY_MAX_FCNT_GAP: + { + phyParam.Value = EU433_MAX_FCNT_GAP; + break; + } + case PHY_ACK_TIMEOUT: + { + phyParam.Value = ( EU433_ACKTIMEOUT + randr( -EU433_ACK_TIMEOUT_RND, EU433_ACK_TIMEOUT_RND ) ); + break; + } + case PHY_DEF_DR1_OFFSET: + { + phyParam.Value = EU433_DEFAULT_RX1_DR_OFFSET; + break; + } + case PHY_DEF_RX2_FREQUENCY: + { + phyParam.Value = EU433_RX_WND_2_FREQ; + break; + } + case PHY_DEF_RX2_DR: + { + phyParam.Value = EU433_RX_WND_2_DR; + break; + } + case PHY_CHANNELS_MASK: + { + phyParam.ChannelsMask = ChannelsMask; + break; + } + case PHY_CHANNELS_DEFAULT_MASK: + { + phyParam.ChannelsMask = ChannelsDefaultMask; + break; + } + case PHY_MAX_NB_CHANNELS: + { + phyParam.Value = EU433_MAX_NB_CHANNELS; + break; + } + case PHY_CHANNELS: + { + phyParam.Channels = Channels; + break; + } + case PHY_DEF_UPLINK_DWELL_TIME: + case PHY_DEF_DOWNLINK_DWELL_TIME: + { + phyParam.Value = 0; + break; + } + case PHY_DEF_MAX_EIRP: + { + phyParam.fValue = EU433_DEFAULT_MAX_EIRP; + break; + } + case PHY_DEF_ANTENNA_GAIN: + { + phyParam.fValue = EU433_DEFAULT_ANTENNA_GAIN; + break; + } + case PHY_NB_JOIN_TRIALS: + case PHY_DEF_NB_JOIN_TRIALS: + { + phyParam.Value = 48; + break; + } + default: + { + break; + } + } + + return phyParam; +} + +void RegionEU433SetBandTxDone( SetBandTxDoneParams_t* txDone ) +{ + RegionCommonSetBandTxDone( txDone->Joined, &Bands[Channels[txDone->Channel].Band], txDone->LastTxDoneTime ); +} + +void RegionEU433InitDefaults( InitType_t type ) +{ + switch( type ) + { + case INIT_TYPE_INIT: + { + // Channels + Channels[0] = ( ChannelParams_t ) EU433_LC1; + Channels[1] = ( ChannelParams_t ) EU433_LC2; + Channels[2] = ( ChannelParams_t ) EU433_LC3; + + // Initialize the channels default mask + ChannelsDefaultMask[0] = LC( 1 ) + LC( 2 ) + LC( 3 ); + // Update the channels mask + RegionCommonChanMaskCopy( ChannelsMask, ChannelsDefaultMask, 1 ); + break; + } + case INIT_TYPE_RESTORE: + { + // Restore channels default mask + ChannelsMask[0] |= ChannelsDefaultMask[0]; + break; + } + default: + { + break; + } + } +} + +bool RegionEU433Verify( VerifyParams_t* verify, PhyAttribute_t phyAttribute ) +{ + switch( phyAttribute ) + { + case PHY_TX_DR: + { + return RegionCommonValueInRange( verify->DatarateParams.Datarate, EU433_TX_MIN_DATARATE, EU433_TX_MAX_DATARATE ); + } + case PHY_DEF_TX_DR: + { + return RegionCommonValueInRange( verify->DatarateParams.Datarate, DR_0, DR_5 ); + } + case PHY_RX_DR: + { + return RegionCommonValueInRange( verify->DatarateParams.Datarate, EU433_RX_MIN_DATARATE, EU433_RX_MAX_DATARATE ); + } + case PHY_DEF_TX_POWER: + case PHY_TX_POWER: + { + // Remark: switched min and max! + return RegionCommonValueInRange( verify->TxPower, EU433_MAX_TX_POWER, EU433_MIN_TX_POWER ); + } + case PHY_DUTY_CYCLE: + { + return EU433_DUTY_CYCLE_ENABLED; + } + case PHY_NB_JOIN_TRIALS: + { + if( verify->NbJoinTrials < 48 ) + { + return false; + } + break; + } + default: + return false; + } + return true; +} + +void RegionEU433ApplyCFList( ApplyCFListParams_t* applyCFList ) +{ + ChannelParams_t newChannel; + ChannelAddParams_t channelAdd; + ChannelRemoveParams_t channelRemove; + + // Setup default datarate range + newChannel.DrRange.Value = ( DR_5 << 4 ) | DR_0; + + // Size of the optional CF list + if( applyCFList->Size != 16 ) + { + return; + } + + // Last byte is RFU, don't take it into account + for( uint8_t i = 0, chanIdx = EU433_NUMB_DEFAULT_CHANNELS; chanIdx < EU433_MAX_NB_CHANNELS; i+=3, chanIdx++ ) + { + if( chanIdx < ( EU433_NUMB_CHANNELS_CF_LIST + EU433_NUMB_DEFAULT_CHANNELS ) ) + { + // Channel frequency + newChannel.Frequency = (uint32_t) applyCFList->Payload[i]; + newChannel.Frequency |= ( (uint32_t) applyCFList->Payload[i + 1] << 8 ); + newChannel.Frequency |= ( (uint32_t) applyCFList->Payload[i + 2] << 16 ); + newChannel.Frequency *= 100; + + // Initialize alternative frequency to 0 + newChannel.Rx1Frequency = 0; + } + else + { + newChannel.Frequency = 0; + newChannel.DrRange.Value = 0; + newChannel.Rx1Frequency = 0; + } + + if( newChannel.Frequency != 0 ) + { + channelAdd.NewChannel = &newChannel; + channelAdd.ChannelId = chanIdx; + + // Try to add all channels + RegionEU433ChannelAdd( &channelAdd ); + } + else + { + channelRemove.ChannelId = chanIdx; + + RegionEU433ChannelsRemove( &channelRemove ); + } + } +} + +bool RegionEU433ChanMaskSet( ChanMaskSetParams_t* chanMaskSet ) +{ + switch( chanMaskSet->ChannelsMaskType ) + { + case CHANNELS_MASK: + { + RegionCommonChanMaskCopy( ChannelsMask, chanMaskSet->ChannelsMaskIn, 1 ); + break; + } + case CHANNELS_DEFAULT_MASK: + { + RegionCommonChanMaskCopy( ChannelsDefaultMask, chanMaskSet->ChannelsMaskIn, 1 ); + break; + } + default: + return false; + } + return true; +} + +bool RegionEU433AdrNext( AdrNextParams_t* adrNext, int8_t* drOut, int8_t* txPowOut, uint32_t* adrAckCounter ) +{ + bool adrAckReq = false; + int8_t datarate = adrNext->Datarate; + int8_t txPower = adrNext->TxPower; + GetPhyParams_t getPhy; + PhyParam_t phyParam; + + // Report back the adr ack counter + *adrAckCounter = adrNext->AdrAckCounter; + + if( adrNext->AdrEnabled == true ) + { + if( datarate == EU433_TX_MIN_DATARATE ) + { + *adrAckCounter = 0; + adrAckReq = false; + } + else + { + if( adrNext->AdrAckCounter >= EU433_ADR_ACK_LIMIT ) + { + adrAckReq = true; + txPower = EU433_MAX_TX_POWER; + } + else + { + adrAckReq = false; + } + if( adrNext->AdrAckCounter >= ( EU433_ADR_ACK_LIMIT + EU433_ADR_ACK_DELAY ) ) + { + if( ( adrNext->AdrAckCounter % EU433_ADR_ACK_DELAY ) == 1 ) + { + // Decrease the datarate + getPhy.Attribute = PHY_NEXT_LOWER_TX_DR; + getPhy.Datarate = datarate; + getPhy.UplinkDwellTime = adrNext->UplinkDwellTime; + phyParam = RegionEU433GetPhyParam( &getPhy ); + datarate = phyParam.Value; + + if( datarate == EU433_TX_MIN_DATARATE ) + { + // We must set adrAckReq to false as soon as we reach the lowest datarate + adrAckReq = false; + if( adrNext->UpdateChanMask == true ) + { + // Re-enable default channels + ChannelsMask[0] |= LC( 1 ) + LC( 2 ) + LC( 3 ); + } + } + } + } + } + } + + *drOut = datarate; + *txPowOut = txPower; + return adrAckReq; +} + +void RegionEU433ComputeRxWindowParameters( int8_t datarate, uint8_t minRxSymbols, uint32_t rxError, RxConfigParams_t *rxConfigParams ) +{ + double tSymbol = 0.0; + + // Get the datarate, perform a boundary check + rxConfigParams->Datarate = MIN( datarate, EU433_RX_MAX_DATARATE ); + rxConfigParams->Bandwidth = GetBandwidth( rxConfigParams->Datarate ); + + if( rxConfigParams->Datarate == DR_7 ) + { // FSK + tSymbol = RegionCommonComputeSymbolTimeFsk( DataratesEU433[rxConfigParams->Datarate] ); + } + else + { // LoRa + tSymbol = RegionCommonComputeSymbolTimeLoRa( DataratesEU433[rxConfigParams->Datarate], BandwidthsEU433[rxConfigParams->Datarate] ); + } + + RegionCommonComputeRxWindowParameters( tSymbol, minRxSymbols, rxError, RADIO_WAKEUP_TIME, &rxConfigParams->WindowTimeout, &rxConfigParams->WindowOffset ); +} + +bool RegionEU433RxConfig( RxConfigParams_t* rxConfig, int8_t* datarate ) +{ + RadioModems_t modem; + int8_t dr = rxConfig->Datarate; + uint8_t maxPayload = 0; + int8_t phyDr = 0; + uint32_t frequency = rxConfig->Frequency; + + if( Radio.GetStatus( ) != RF_IDLE ) + { + return false; + } + + if( rxConfig->Window == 0 ) + { + // Apply window 1 frequency + frequency = Channels[rxConfig->Channel].Frequency; + // Apply the alternative RX 1 window frequency, if it is available + if( Channels[rxConfig->Channel].Rx1Frequency != 0 ) + { + frequency = Channels[rxConfig->Channel].Rx1Frequency; + } + } + + // Read the physical datarate from the datarates table + phyDr = DataratesEU433[dr]; + + Radio.SetChannel( frequency ); + + // Radio configuration + if( dr == DR_7 ) + { + modem = MODEM_FSK; + Radio.SetRxConfig( modem, 50000, phyDr * 1000, 0, 83333, 5, rxConfig->WindowTimeout, false, 0, true, 0, 0, false, rxConfig->RxContinuous ); + } + else + { + modem = MODEM_LORA; + Radio.SetRxConfig( modem, rxConfig->Bandwidth, phyDr, 1, 0, 8, rxConfig->WindowTimeout, false, 0, false, 0, 0, true, rxConfig->RxContinuous ); + } + + if( rxConfig->RepeaterSupport == true ) + { + maxPayload = MaxPayloadOfDatarateRepeaterEU433[dr]; + } + else + { + maxPayload = MaxPayloadOfDatarateEU433[dr]; + } + Radio.SetMaxPayloadLength( modem, maxPayload + LORA_MAC_FRMPAYLOAD_OVERHEAD ); + + *datarate = (uint8_t) dr; + return true; +} + +bool RegionEU433TxConfig( TxConfigParams_t* txConfig, int8_t* txPower, TimerTime_t* txTimeOnAir ) +{ + RadioModems_t modem; + int8_t phyDr = DataratesEU433[txConfig->Datarate]; + int8_t txPowerLimited = LimitTxPower( txConfig->TxPower, Bands[Channels[txConfig->Channel].Band].TxMaxPower, txConfig->Datarate, ChannelsMask ); + uint32_t bandwidth = GetBandwidth( txConfig->Datarate ); + int8_t phyTxPower = 0; + + // Calculate physical TX power + phyTxPower = RegionCommonComputeTxPower( txPowerLimited, txConfig->MaxEirp, txConfig->AntennaGain ); + + // Setup the radio frequency + Radio.SetChannel( Channels[txConfig->Channel].Frequency ); + + if( txConfig->Datarate == DR_7 ) + { // High Speed FSK channel + modem = MODEM_FSK; + Radio.SetTxConfig( modem, phyTxPower, 25000, bandwidth, phyDr * 1000, 0, 5, false, true, 0, 0, false, 3000 ); + } + else + { + modem = MODEM_LORA; + Radio.SetTxConfig( modem, phyTxPower, 0, bandwidth, phyDr, 1, 8, false, true, 0, 0, false, 3000 ); + } + + // Setup maximum payload lenght of the radio driver + Radio.SetMaxPayloadLength( modem, txConfig->PktLen ); + // Get the time-on-air of the next tx frame + *txTimeOnAir = Radio.TimeOnAir( modem, txConfig->PktLen ); + + *txPower = txPowerLimited; + return true; +} + +uint8_t RegionEU433LinkAdrReq( LinkAdrReqParams_t* linkAdrReq, int8_t* drOut, int8_t* txPowOut, uint8_t* nbRepOut, uint8_t* nbBytesParsed ) +{ + uint8_t status = 0x07; + RegionCommonLinkAdrParams_t linkAdrParams; + uint8_t nextIndex = 0; + uint8_t bytesProcessed = 0; + uint16_t chMask = 0; + GetPhyParams_t getPhy; + PhyParam_t phyParam; + RegionCommonLinkAdrReqVerifyParams_t linkAdrVerifyParams; + + while( bytesProcessed < linkAdrReq->PayloadSize ) + { + // Get ADR request parameters + nextIndex = RegionCommonParseLinkAdrReq( &( linkAdrReq->Payload[bytesProcessed] ), &linkAdrParams ); + + if( nextIndex == 0 ) + break; // break loop, since no more request has been found + + // Update bytes processed + bytesProcessed += nextIndex; + + // Revert status, as we only check the last ADR request for the channel mask KO + status = 0x07; + + // Setup temporary channels mask + chMask = linkAdrParams.ChMask; + + // Verify channels mask + if( ( linkAdrParams.ChMaskCtrl == 0 ) && ( chMask == 0 ) ) + { + status &= 0xFE; // Channel mask KO + } + else if( ( ( linkAdrParams.ChMaskCtrl >= 1 ) && ( linkAdrParams.ChMaskCtrl <= 5 )) || + ( linkAdrParams.ChMaskCtrl >= 7 ) ) + { + // RFU + status &= 0xFE; // Channel mask KO + } + else + { + for( uint8_t i = 0; i < EU433_MAX_NB_CHANNELS; i++ ) + { + if( linkAdrParams.ChMaskCtrl == 6 ) + { + if( Channels[i].Frequency != 0 ) + { + chMask |= 1 << i; + } + } + else + { + if( ( ( chMask & ( 1 << i ) ) != 0 ) && + ( Channels[i].Frequency == 0 ) ) + {// Trying to enable an undefined channel + status &= 0xFE; // Channel mask KO + } + } + } + } + } + + // Get the minimum possible datarate + getPhy.Attribute = PHY_MIN_TX_DR; + getPhy.UplinkDwellTime = linkAdrReq->UplinkDwellTime; + phyParam = RegionEU433GetPhyParam( &getPhy ); + + linkAdrVerifyParams.Status = status; + linkAdrVerifyParams.AdrEnabled = linkAdrReq->AdrEnabled; + linkAdrVerifyParams.Datarate = linkAdrParams.Datarate; + linkAdrVerifyParams.TxPower = linkAdrParams.TxPower; + linkAdrVerifyParams.NbRep = linkAdrParams.NbRep; + linkAdrVerifyParams.CurrentDatarate = linkAdrReq->CurrentDatarate; + linkAdrVerifyParams.CurrentTxPower = linkAdrReq->CurrentTxPower; + linkAdrVerifyParams.CurrentNbRep = linkAdrReq->CurrentNbRep; + linkAdrVerifyParams.NbChannels = EU433_MAX_NB_CHANNELS; + linkAdrVerifyParams.ChannelsMask = &chMask; + linkAdrVerifyParams.MinDatarate = ( int8_t )phyParam.Value; + linkAdrVerifyParams.MaxDatarate = EU433_TX_MAX_DATARATE; + linkAdrVerifyParams.Channels = Channels; + linkAdrVerifyParams.MinTxPower = EU433_MIN_TX_POWER; + linkAdrVerifyParams.MaxTxPower = EU433_MAX_TX_POWER; + + // Verify the parameters and update, if necessary + status = RegionCommonLinkAdrReqVerifyParams( &linkAdrVerifyParams, &linkAdrParams.Datarate, &linkAdrParams.TxPower, &linkAdrParams.NbRep ); + + // Update channelsMask if everything is correct + if( status == 0x07 ) + { + // Set the channels mask to a default value + memset( ChannelsMask, 0, sizeof( ChannelsMask ) ); + // Update the channels mask + ChannelsMask[0] = chMask; + } + + // Update status variables + *drOut = linkAdrParams.Datarate; + *txPowOut = linkAdrParams.TxPower; + *nbRepOut = linkAdrParams.NbRep; + *nbBytesParsed = bytesProcessed; + + return status; +} + +uint8_t RegionEU433RxParamSetupReq( RxParamSetupReqParams_t* rxParamSetupReq ) +{ + uint8_t status = 0x07; + + // Verify radio frequency + if( Radio.CheckRfFrequency( rxParamSetupReq->Frequency ) == false ) + { + status &= 0xFE; // Channel frequency KO + } + + // Verify datarate + if( RegionCommonValueInRange( rxParamSetupReq->Datarate, EU433_RX_MIN_DATARATE, EU433_RX_MAX_DATARATE ) == false ) + { + status &= 0xFD; // Datarate KO + } + + // Verify datarate offset + if( RegionCommonValueInRange( rxParamSetupReq->DrOffset, EU433_MIN_RX1_DR_OFFSET, EU433_MAX_RX1_DR_OFFSET ) == false ) + { + status &= 0xFB; // Rx1DrOffset range KO + } + + return status; +} + +uint8_t RegionEU433NewChannelReq( NewChannelReqParams_t* newChannelReq ) +{ + uint8_t status = 0x03; + ChannelAddParams_t channelAdd; + ChannelRemoveParams_t channelRemove; + + if( newChannelReq->NewChannel->Frequency == 0 ) + { + channelRemove.ChannelId = newChannelReq->ChannelId; + + // Remove + if( RegionEU433ChannelsRemove( &channelRemove ) == false ) + { + status &= 0xFC; + } + } + else + { + channelAdd.NewChannel = newChannelReq->NewChannel; + channelAdd.ChannelId = newChannelReq->ChannelId; + + switch( RegionEU433ChannelAdd( &channelAdd ) ) + { + case LORAMAC_STATUS_OK: + { + break; + } + case LORAMAC_STATUS_FREQUENCY_INVALID: + { + status &= 0xFE; + break; + } + case LORAMAC_STATUS_DATARATE_INVALID: + { + status &= 0xFD; + break; + } + case LORAMAC_STATUS_FREQ_AND_DR_INVALID: + { + status &= 0xFC; + break; + } + default: + { + status &= 0xFC; + break; + } + } + } + + return status; +} + +int8_t RegionEU433TxParamSetupReq( TxParamSetupReqParams_t* txParamSetupReq ) +{ + return -1; +} + +uint8_t RegionEU433DlChannelReq( DlChannelReqParams_t* dlChannelReq ) +{ + uint8_t status = 0x03; + + // Verify if the frequency is supported + if( VerifyTxFreq( dlChannelReq->Rx1Frequency ) == false ) + { + status &= 0xFE; + } + + // Verify if an uplink frequency exists + if( Channels[dlChannelReq->ChannelId].Frequency == 0 ) + { + status &= 0xFD; + } + + // Apply Rx1 frequency, if the status is OK + if( status == 0x03 ) + { + Channels[dlChannelReq->ChannelId].Rx1Frequency = dlChannelReq->Rx1Frequency; + } + + return status; +} + +int8_t RegionEU433AlternateDr( AlternateDrParams_t* alternateDr ) +{ + int8_t datarate = 0; + + if( ( alternateDr->NbTrials % 48 ) == 0 ) + { + datarate = DR_0; + } + else if( ( alternateDr->NbTrials % 32 ) == 0 ) + { + datarate = DR_1; + } + else if( ( alternateDr->NbTrials % 24 ) == 0 ) + { + datarate = DR_2; + } + else if( ( alternateDr->NbTrials % 16 ) == 0 ) + { + datarate = DR_3; + } + else if( ( alternateDr->NbTrials % 8 ) == 0 ) + { + datarate = DR_4; + } + else + { + datarate = DR_5; + } + return datarate; +} + +void RegionEU433CalcBackOff( CalcBackOffParams_t* calcBackOff ) +{ + RegionCommonCalcBackOffParams_t calcBackOffParams; + + calcBackOffParams.Channels = Channels; + calcBackOffParams.Bands = Bands; + calcBackOffParams.LastTxIsJoinRequest = calcBackOff->LastTxIsJoinRequest; + calcBackOffParams.Joined = calcBackOff->Joined; + calcBackOffParams.DutyCycleEnabled = calcBackOff->DutyCycleEnabled; + calcBackOffParams.Channel = calcBackOff->Channel; + calcBackOffParams.ElapsedTime = calcBackOff->ElapsedTime; + calcBackOffParams.TxTimeOnAir = calcBackOff->TxTimeOnAir; + + RegionCommonCalcBackOff( &calcBackOffParams ); +} + +bool RegionEU433NextChannel( NextChanParams_t* nextChanParams, uint8_t* channel, TimerTime_t* time, TimerTime_t* aggregatedTimeOff ) +{ + uint8_t nbEnabledChannels = 0; + uint8_t delayTx = 0; + uint8_t enabledChannels[EU433_MAX_NB_CHANNELS] = { 0 }; + TimerTime_t nextTxDelay = 0; + + if( RegionCommonCountChannels( ChannelsMask, 0, 1 ) == 0 ) + { // Reactivate default channels + ChannelsMask[0] |= LC( 1 ) + LC( 2 ) + LC( 3 ); + } + + if( nextChanParams->AggrTimeOff <= TimerGetElapsedTime( nextChanParams->LastAggrTx ) ) + { + // Reset Aggregated time off + *aggregatedTimeOff = 0; + + // Update bands Time OFF + nextTxDelay = RegionCommonUpdateBandTimeOff( nextChanParams->Joined, nextChanParams->DutyCycleEnabled, Bands, EU433_MAX_NB_BANDS ); + + // Search how many channels are enabled + nbEnabledChannels = CountNbOfEnabledChannels( nextChanParams->Joined, nextChanParams->Datarate, + ChannelsMask, Channels, + Bands, enabledChannels, &delayTx ); + } + else + { + delayTx++; + nextTxDelay = nextChanParams->AggrTimeOff - TimerGetElapsedTime( nextChanParams->LastAggrTx ); + } + + if( nbEnabledChannels > 0 ) + { + // We found a valid channel + *channel = enabledChannels[randr( 0, nbEnabledChannels - 1 )]; + + *time = 0; + return true; + } + else + { + if( delayTx > 0 ) + { + // Delay transmission due to AggregatedTimeOff or to a band time off + *time = nextTxDelay; + return true; + } + // Datarate not supported by any channel, restore defaults + ChannelsMask[0] |= LC( 1 ) + LC( 2 ) + LC( 3 ); + *time = 0; + return false; + } +} + +LoRaMacStatus_t RegionEU433ChannelAdd( ChannelAddParams_t* channelAdd ) +{ + uint8_t band = 0; + bool drInvalid = false; + bool freqInvalid = false; + uint8_t id = channelAdd->ChannelId; + + if( id >= EU433_MAX_NB_CHANNELS ) + { + return LORAMAC_STATUS_PARAMETER_INVALID; + } + + // Validate the datarate range + if( RegionCommonValueInRange( channelAdd->NewChannel->DrRange.Fields.Min, EU433_TX_MIN_DATARATE, EU433_TX_MAX_DATARATE ) == false ) + { + drInvalid = true; + } + if( RegionCommonValueInRange( channelAdd->NewChannel->DrRange.Fields.Max, EU433_TX_MIN_DATARATE, EU433_TX_MAX_DATARATE ) == false ) + { + drInvalid = true; + } + if( channelAdd->NewChannel->DrRange.Fields.Min > channelAdd->NewChannel->DrRange.Fields.Max ) + { + drInvalid = true; + } + + // Default channels don't accept all values + if( id < EU433_NUMB_DEFAULT_CHANNELS ) + { + // Validate the datarate range for min: must be DR_0 + if( channelAdd->NewChannel->DrRange.Fields.Min > DR_0 ) + { + drInvalid = true; + } + // Validate the datarate range for max: must be DR_5 <= Max <= TX_MAX_DATARATE + if( RegionCommonValueInRange( channelAdd->NewChannel->DrRange.Fields.Max, DR_5, EU433_TX_MAX_DATARATE ) == false ) + { + drInvalid = true; + } + // We are not allowed to change the frequency + if( channelAdd->NewChannel->Frequency != Channels[id].Frequency ) + { + freqInvalid = true; + } + } + + // Check frequency + if( freqInvalid == false ) + { + if( VerifyTxFreq( channelAdd->NewChannel->Frequency ) == false ) + { + freqInvalid = true; + } + } + + // Check status + if( ( drInvalid == true ) && ( freqInvalid == true ) ) + { + return LORAMAC_STATUS_FREQ_AND_DR_INVALID; + } + if( drInvalid == true ) + { + return LORAMAC_STATUS_DATARATE_INVALID; + } + if( freqInvalid == true ) + { + return LORAMAC_STATUS_FREQUENCY_INVALID; + } + + memcpy( &(Channels[id]), channelAdd->NewChannel, sizeof( Channels[id] ) ); + Channels[id].Band = band; + ChannelsMask[0] |= ( 1 << id ); + return LORAMAC_STATUS_OK; +} + +bool RegionEU433ChannelsRemove( ChannelRemoveParams_t* channelRemove ) +{ + uint8_t id = channelRemove->ChannelId; + + if( id < EU433_NUMB_DEFAULT_CHANNELS ) + { + return false; + } + + // Remove the channel from the list of channels + Channels[id] = ( ChannelParams_t ){ 0, 0, { 0 }, 0 }; + + return RegionCommonChanDisable( ChannelsMask, id, EU433_MAX_NB_CHANNELS ); +} + +void RegionEU433SetContinuousWave( ContinuousWaveParams_t* continuousWave ) +{ + int8_t txPowerLimited = LimitTxPower( continuousWave->TxPower, Bands[Channels[continuousWave->Channel].Band].TxMaxPower, continuousWave->Datarate, ChannelsMask ); + int8_t phyTxPower = 0; + uint32_t frequency = Channels[continuousWave->Channel].Frequency; + + // Calculate physical TX power + phyTxPower = RegionCommonComputeTxPower( txPowerLimited, continuousWave->MaxEirp, continuousWave->AntennaGain ); + + Radio.SetTxContinuousWave( frequency, phyTxPower, continuousWave->Timeout ); +} + +uint8_t RegionEU433ApplyDrOffset( uint8_t downlinkDwellTime, int8_t dr, int8_t drOffset ) +{ + int8_t datarate = dr - drOffset; + + if( datarate < 0 ) + { + datarate = DR_0; + } + return datarate; +} diff --git a/src/mac/region/RegionEU433.h b/src/mac/region/RegionEU433.h new file mode 100755 index 0000000..724d2de --- /dev/null +++ b/src/mac/region/RegionEU433.h @@ -0,0 +1,466 @@ +/*! + * \file RegionEU433.h + * + * \brief Region definition for EU433 + * + * \copyright Revised BSD License, see section \ref LICENSE. + * + * \code + * ______ _ + * / _____) _ | | + * ( (____ _____ ____ _| |_ _____ ____| |__ + * \____ \| ___ | (_ _) ___ |/ ___) _ \ + * _____) ) ____| | | || |_| ____( (___| | | | + * (______/|_____)_|_|_| \__)_____)\____)_| |_| + * (C)2013 Semtech + * + * ___ _____ _ ___ _ _____ ___ ___ ___ ___ + * / __|_ _/_\ / __| |/ / __/ _ \| _ \/ __| __| + * \__ \ | |/ _ \ (__| ' <| _| (_) | / (__| _| + * |___/ |_/_/ \_\___|_|\_\_| \___/|_|_\\___|___| + * embedded.connectivity.solutions=============== + * + * \endcode + * + * \author Miguel Luis ( Semtech ) + * + * \author Gregory Cristian ( Semtech ) + * + * \author Daniel Jaeckle ( STACKFORCE ) + * + * \defgroup REGIONEU433 Region EU433 + * Implementation according to LoRaWAN Specification v1.0.2. + * \{ + */ +#ifndef __REGION_EU433_H__ +#define __REGION_EU433_H__ + +/*! + * LoRaMac maximum number of channels + */ +#define EU433_MAX_NB_CHANNELS 16 + +/*! + * Number of default channels + */ +#define EU433_NUMB_DEFAULT_CHANNELS 3 + +/*! + * Number of channels to apply for the CF list + */ +#define EU433_NUMB_CHANNELS_CF_LIST 5 + +/*! + * Minimal datarate that can be used by the node + */ +#define EU433_TX_MIN_DATARATE DR_0 + +/*! + * Maximal datarate that can be used by the node + */ +#define EU433_TX_MAX_DATARATE DR_7 + +/*! + * Minimal datarate that can be used by the node + */ +#define EU433_RX_MIN_DATARATE DR_0 + +/*! + * Maximal datarate that can be used by the node + */ +#define EU433_RX_MAX_DATARATE DR_7 + +/*! + * Default datarate used by the node + */ +#define EU433_DEFAULT_DATARATE DR_0 + +/*! + * Minimal Rx1 receive datarate offset + */ +#define EU433_MIN_RX1_DR_OFFSET 0 + +/*! + * Maximal Rx1 receive datarate offset + */ +#define EU433_MAX_RX1_DR_OFFSET 5 + +/*! + * Default Rx1 receive datarate offset + */ +#define EU433_DEFAULT_RX1_DR_OFFSET 0 + +/*! + * Minimal Tx output power that can be used by the node + */ +#define EU433_MIN_TX_POWER TX_POWER_5 + +/*! + * Maximal Tx output power that can be used by the node + */ +#define EU433_MAX_TX_POWER TX_POWER_0 + +/*! + * Default Tx output power used by the node + */ +#define EU433_DEFAULT_TX_POWER TX_POWER_0 + +/*! + * Default Max EIRP + */ +#define EU433_DEFAULT_MAX_EIRP 12.15f + +/*! + * Default antenna gain + */ +#define EU433_DEFAULT_ANTENNA_GAIN 2.15f + +/*! + * ADR Ack limit + */ +#define EU433_ADR_ACK_LIMIT 64 + +/*! + * ADR Ack delay + */ +#define EU433_ADR_ACK_DELAY 32 + +/*! + * Enabled or disabled the duty cycle + */ +#define EU433_DUTY_CYCLE_ENABLED 1 + +/*! + * Maximum RX window duration + */ +#define EU433_MAX_RX_WINDOW 3000 + +/*! + * Receive delay 1 + */ +#define EU433_RECEIVE_DELAY1 1000 + +/*! + * Receive delay 2 + */ +#define EU433_RECEIVE_DELAY2 2000 + +/*! + * Join accept delay 1 + */ +#define EU433_JOIN_ACCEPT_DELAY1 5000 + +/*! + * Join accept delay 2 + */ +#define EU433_JOIN_ACCEPT_DELAY2 6000 + +/*! + * Maximum frame counter gap + */ +#define EU433_MAX_FCNT_GAP 16384 + +/*! + * Ack timeout + */ +#define EU433_ACKTIMEOUT 2000 + +/*! + * Random ack timeout limits + */ +#define EU433_ACK_TIMEOUT_RND 1000 + +/*! + * Verification of default datarate + */ +#if ( EU433_DEFAULT_DATARATE > DR_5 ) +#error "A default DR higher than DR_5 may lead to connectivity loss." +#endif + +/*! + * Second reception window channel frequency definition. + */ +#define EU433_RX_WND_2_FREQ 434665000 + +/*! + * Second reception window channel datarate definition. + */ +#define EU433_RX_WND_2_DR DR_0 + +/*! + * LoRaMac maximum number of bands + */ +#define EU433_MAX_NB_BANDS 1 + +/*! + * Band 0 definition + * { DutyCycle, TxMaxPower, LastTxDoneTime, TimeOff } + */ +#define EU433_BAND0 { 100, EU433_MAX_TX_POWER, 0, 0 } // 1.0 % + +/*! + * LoRaMac default channel 1 + * Channel = { Frequency [Hz], RX1 Frequency [Hz], { ( ( DrMax << 4 ) | DrMin ) }, Band } + */ +#define EU433_LC1 { 433175000, 0, { ( ( DR_5 << 4 ) | DR_0 ) }, 0 } + +/*! + * LoRaMac default channel 2 + * Channel = { Frequency [Hz], RX1 Frequency [Hz], { ( ( DrMax << 4 ) | DrMin ) }, Band } + */ +#define EU433_LC2 { 433375000, 0, { ( ( DR_5 << 4 ) | DR_0 ) }, 0 } + +/*! + * LoRaMac default channel 3 + * Channel = { Frequency [Hz], RX1 Frequency [Hz], { ( ( DrMax << 4 ) | DrMin ) }, Band } + */ +#define EU433_LC3 { 433575000, 0, { ( ( DR_5 << 4 ) | DR_0 ) }, 0 } + +/*! + * LoRaMac channels which are allowed for the join procedure + */ +#define EU433_JOIN_CHANNELS ( uint16_t )( LC( 1 ) | LC( 2 ) | LC( 3 ) ) + +/*! + * Data rates table definition + */ +static const uint8_t DataratesEU433[] = { 12, 11, 10, 9, 8, 7, 7, 50 }; + +/*! + * Bandwidths table definition in Hz + */ +static const uint32_t BandwidthsEU433[] = { 125000, 125000, 125000, 125000, 125000, 125000, 250000, 0 }; + +/*! + * Maximum payload with respect to the datarate index. Cannot operate with repeater. + */ +static const uint8_t MaxPayloadOfDatarateEU433[] = { 51, 51, 51, 115, 242, 242, 242, 242 }; + +/*! + * Maximum payload with respect to the datarate index. Can operate with repeater. + */ +static const uint8_t MaxPayloadOfDatarateRepeaterEU433[] = { 51, 51, 51, 115, 222, 222, 222, 222 }; + +/*! + * \brief The function gets a value of a specific phy attribute. + * + * \param [IN] getPhy Pointer to the function parameters. + * + * \retval Returns a structure containing the PHY parameter. + */ +PhyParam_t RegionEU433GetPhyParam( GetPhyParams_t* getPhy ); + +/*! + * \brief Updates the last TX done parameters of the current channel. + * + * \param [IN] txDone Pointer to the function parameters. + */ +void RegionEU433SetBandTxDone( SetBandTxDoneParams_t* txDone ); + +/*! + * \brief Initializes the channels masks and the channels. + * + * \param [IN] type Sets the initialization type. + */ +void RegionEU433InitDefaults( InitType_t type ); + +/*! + * \brief Verifies a parameter. + * + * \param [IN] verify Pointer to the function parameters. + * + * \param [IN] type Sets the initialization type. + * + * \retval Returns true, if the parameter is valid. + */ +bool RegionEU433Verify( VerifyParams_t* verify, PhyAttribute_t phyAttribute ); + +/*! + * \brief The function parses the input buffer and sets up the channels of the + * CF list. + * + * \param [IN] applyCFList Pointer to the function parameters. + */ +void RegionEU433ApplyCFList( ApplyCFListParams_t* applyCFList ); + +/*! + * \brief Sets a channels mask. + * + * \param [IN] chanMaskSet Pointer to the function parameters. + * + * \retval Returns true, if the channels mask could be set. + */ +bool RegionEU433ChanMaskSet( ChanMaskSetParams_t* chanMaskSet ); + +/*! + * \brief Calculates the next datarate to set, when ADR is on or off. + * + * \param [IN] adrNext Pointer to the function parameters. + * + * \param [OUT] drOut The calculated datarate for the next TX. + * + * \param [OUT] txPowOut The TX power for the next TX. + * + * \param [OUT] adrAckCounter The calculated ADR acknowledgement counter. + * + * \retval Returns true, if an ADR request should be performed. + */ +bool RegionEU433AdrNext( AdrNextParams_t* adrNext, int8_t* drOut, int8_t* txPowOut, uint32_t* adrAckCounter ); + +/*! + * Computes the Rx window timeout and offset. + * + * \param [IN] datarate Rx window datarate index to be used + * + * \param [IN] minRxSymbols Minimum required number of symbols to detect an Rx frame. + * + * \param [IN] rxError System maximum timing error of the receiver. In milliseconds + * The receiver will turn on in a [-rxError : +rxError] ms + * interval around RxOffset + * + * \param [OUT]rxConfigParams Returns updated WindowTimeout and WindowOffset fields. + */ +void RegionEU433ComputeRxWindowParameters( int8_t datarate, uint8_t minRxSymbols, uint32_t rxError, RxConfigParams_t *rxConfigParams ); + +/*! + * \brief Configuration of the RX windows. + * + * \param [IN] rxConfig Pointer to the function parameters. + * + * \param [OUT] datarate The datarate index which was set. + * + * \retval Returns true, if the configuration was applied successfully. + */ +bool RegionEU433RxConfig( RxConfigParams_t* rxConfig, int8_t* datarate ); + +/*! + * \brief TX configuration. + * + * \param [IN] txConfig Pointer to the function parameters. + * + * \param [OUT] txPower The tx power index which was set. + * + * \param [OUT] txTimeOnAir The time-on-air of the frame. + * + * \retval Returns true, if the configuration was applied successfully. + */ +bool RegionEU433TxConfig( TxConfigParams_t* txConfig, int8_t* txPower, TimerTime_t* txTimeOnAir ); + +/*! + * \brief The function processes a Link ADR Request. + * + * \param [IN] linkAdrReq Pointer to the function parameters. + * + * \retval Returns the status of the operation, according to the LoRaMAC specification. + */ +uint8_t RegionEU433LinkAdrReq( LinkAdrReqParams_t* linkAdrReq, int8_t* drOut, int8_t* txPowOut, uint8_t* nbRepOut, uint8_t* nbBytesParsed ); + +/*! + * \brief The function processes a RX Parameter Setup Request. + * + * \param [IN] rxParamSetupReq Pointer to the function parameters. + * + * \retval Returns the status of the operation, according to the LoRaMAC specification. + */ +uint8_t RegionEU433RxParamSetupReq( RxParamSetupReqParams_t* rxParamSetupReq ); + +/*! + * \brief The function processes a Channel Request. + * + * \param [IN] newChannelReq Pointer to the function parameters. + * + * \retval Returns the status of the operation, according to the LoRaMAC specification. + */ +uint8_t RegionEU433NewChannelReq( NewChannelReqParams_t* newChannelReq ); + +/*! + * \brief The function processes a TX ParamSetup Request. + * + * \param [IN] txParamSetupReq Pointer to the function parameters. + * + * \retval Returns the status of the operation, according to the LoRaMAC specification. + * Returns -1, if the functionality is not implemented. In this case, the end node + * shall not process the command. + */ +int8_t RegionEU433TxParamSetupReq( TxParamSetupReqParams_t* txParamSetupReq ); + +/*! + * \brief The function processes a DlChannel Request. + * + * \param [IN] dlChannelReq Pointer to the function parameters. + * + * \retval Returns the status of the operation, according to the LoRaMAC specification. + */ +uint8_t RegionEU433DlChannelReq( DlChannelReqParams_t* dlChannelReq ); + +/*! + * \brief Alternates the datarate of the channel for the join request. + * + * \param [IN] alternateDr Pointer to the function parameters. + * + * \retval Datarate to apply. + */ +int8_t RegionEU433AlternateDr( AlternateDrParams_t* alternateDr ); + +/*! + * \brief Calculates the back-off time. + * + * \param [IN] calcBackOff Pointer to the function parameters. + */ +void RegionEU433CalcBackOff( CalcBackOffParams_t* calcBackOff ); + +/*! + * \brief Searches and set the next random available channel + * + * \param [OUT] channel Next channel to use for TX. + * + * \param [OUT] time Time to wait for the next transmission according to the duty + * cycle. + * + * \param [OUT] aggregatedTimeOff Updates the aggregated time off. + * + * \retval Function status [1: OK, 0: Unable to find a channel on the current datarate] + */ +bool RegionEU433NextChannel( NextChanParams_t* nextChanParams, uint8_t* channel, TimerTime_t* time, TimerTime_t* aggregatedTimeOff ); + +/*! + * \brief Adds a channel. + * + * \param [IN] channelAdd Pointer to the function parameters. + * + * \retval Status of the operation. + */ +LoRaMacStatus_t RegionEU433ChannelAdd( ChannelAddParams_t* channelAdd ); + +/*! + * \brief Removes a channel. + * + * \param [IN] channelRemove Pointer to the function parameters. + * + * \retval Returns true, if the channel was removed successfully. + */ +bool RegionEU433ChannelsRemove( ChannelRemoveParams_t* channelRemove ); + +/*! + * \brief Sets the radio into continuous wave mode. + * + * \param [IN] continuousWave Pointer to the function parameters. + */ +void RegionEU433SetContinuousWave( ContinuousWaveParams_t* continuousWave ); + +/*! + * \brief Computes new datarate according to the given offset + * + * \param [IN] downlinkDwellTime Downlink dwell time configuration. 0: No limit, 1: 400ms + * + * \param [IN] dr Current datarate + * + * \param [IN] drOffset Offset to be applied + * + * \retval newDr Computed datarate. + */ +uint8_t RegionEU433ApplyDrOffset( uint8_t downlinkDwellTime, int8_t dr, int8_t drOffset ); + +/*! \} defgroup REGIONEU433 */ + +#endif // __REGION_EU433_H__ diff --git a/src/mac/region/RegionEU868.c b/src/mac/region/RegionEU868.c new file mode 100755 index 0000000..74fcb50 --- /dev/null +++ b/src/mac/region/RegionEU868.c @@ -0,0 +1,1081 @@ +/* + / _____) _ | | +( (____ _____ ____ _| |_ _____ ____| |__ + \____ \| ___ | (_ _) ___ |/ ___) _ \ + _____) ) ____| | | || |_| ____( (___| | | | +(______/|_____)_|_|_| \__)_____)\____)_| |_| + (C)2013 Semtech + ___ _____ _ ___ _ _____ ___ ___ ___ ___ +/ __|_ _/_\ / __| |/ / __/ _ \| _ \/ __| __| +\__ \ | |/ _ \ (__| ' <| _| (_) | / (__| _| +|___/ |_/_/ \_\___|_|\_\_| \___/|_|_\\___|___| +embedded.connectivity.solutions=============== + +Description: LoRa MAC region EU868 implementation + +License: Revised BSD License, see LICENSE.TXT file include in the project + +Maintainer: Miguel Luis ( Semtech ), Gregory Cristian ( Semtech ) and Daniel Jaeckle ( STACKFORCE ) +*/ +#include +#include +#include +#include + +#include "board.h" +#include "LoRaMac.h" + +#include "utilities.h" + +#include "Region.h" +#include "RegionCommon.h" +#include "RegionEU868.h" + +// Definitions +#define CHANNELS_MASK_SIZE 1 + +// Global attributes +/*! + * LoRaMAC channels + */ +static ChannelParams_t Channels[EU868_MAX_NB_CHANNELS]; + +/*! + * LoRaMac bands + */ +static Band_t Bands[EU868_MAX_NB_BANDS] = +{ + EU868_BAND0, + EU868_BAND1, + EU868_BAND2, + EU868_BAND3, + EU868_BAND4, +}; + +/*! + * LoRaMac channels mask + */ +static uint16_t ChannelsMask[CHANNELS_MASK_SIZE]; + +/*! + * LoRaMac channels default mask + */ +static uint16_t ChannelsDefaultMask[CHANNELS_MASK_SIZE]; + +// Static functions +static int8_t GetNextLowerTxDr( int8_t dr, int8_t minDr ) +{ + uint8_t nextLowerDr = 0; + + if( dr == minDr ) + { + nextLowerDr = minDr; + } + else + { + nextLowerDr = dr - 1; + } + return nextLowerDr; +} + +static uint32_t GetBandwidth( uint32_t drIndex ) +{ + switch( BandwidthsEU868[drIndex] ) + { + default: + case 125000: + return 0; + case 250000: + return 1; + case 500000: + return 2; + } +} + +static int8_t LimitTxPower( int8_t txPower, int8_t maxBandTxPower, int8_t datarate, uint16_t* channelsMask ) +{ + int8_t txPowerResult = txPower; + + // Limit tx power to the band max + txPowerResult = MAX( txPower, maxBandTxPower ); + + return txPowerResult; +} + +static bool VerifyTxFreq( uint32_t freq, uint8_t *band ) +{ + // Check radio driver support + if( Radio.CheckRfFrequency( freq ) == false ) + { + return false; + } + + // Check frequency bands + if( ( freq >= 863000000 ) && ( freq < 865000000 ) ) + { + *band = 2; + } + else if( ( freq >= 865000000 ) && ( freq <= 868000000 ) ) + { + *band = 0; + } + else if( ( freq > 868000000 ) && ( freq <= 868600000 ) ) + { + *band = 1; + } + else if( ( freq >= 868700000 ) && ( freq <= 869200000 ) ) + { + *band = 2; + } + else if( ( freq >= 869400000 ) && ( freq <= 869650000 ) ) + { + *band = 3; + } + else if( ( freq >= 869700000 ) && ( freq <= 870000000 ) ) + { + *band = 4; + } + else + { + return false; + } + return true; +} + +static uint8_t CountNbOfEnabledChannels( bool joined, uint8_t datarate, uint16_t* channelsMask, ChannelParams_t* channels, Band_t* bands, uint8_t* enabledChannels, uint8_t* delayTx ) +{ + uint8_t nbEnabledChannels = 0; + uint8_t delayTransmission = 0; + + for( uint8_t i = 0, k = 0; i < EU868_MAX_NB_CHANNELS; i += 16, k++ ) + { + for( uint8_t j = 0; j < 16; j++ ) + { + if( ( channelsMask[k] & ( 1 << j ) ) != 0 ) + { + if( channels[i + j].Frequency == 0 ) + { // Check if the channel is enabled + continue; + } + if( joined == false ) + { + if( ( EU868_JOIN_CHANNELS & ( 1 << j ) ) == 0 ) + { + continue; + } + } + if( RegionCommonValueInRange( datarate, channels[i + j].DrRange.Fields.Min, + channels[i + j].DrRange.Fields.Max ) == false ) + { // Check if the current channel selection supports the given datarate + continue; + } + if( bands[channels[i + j].Band].TimeOff > 0 ) + { // Check if the band is available for transmission + delayTransmission++; + continue; + } + enabledChannels[nbEnabledChannels++] = i + j; + } + } + } + + *delayTx = delayTransmission; + return nbEnabledChannels; +} + +PhyParam_t RegionEU868GetPhyParam( GetPhyParams_t* getPhy ) +{ + PhyParam_t phyParam = { 0 }; + + switch( getPhy->Attribute ) + { + case PHY_MIN_RX_DR: + { + phyParam.Value = EU868_RX_MIN_DATARATE; + break; + } + case PHY_MIN_TX_DR: + { + phyParam.Value = EU868_TX_MIN_DATARATE; + break; + } + case PHY_DEF_TX_DR: + { + phyParam.Value = EU868_DEFAULT_DATARATE; + break; + } + case PHY_NEXT_LOWER_TX_DR: + { + phyParam.Value = GetNextLowerTxDr( getPhy->Datarate, EU868_TX_MIN_DATARATE ); + break; + } + case PHY_DEF_TX_POWER: + { + phyParam.Value = EU868_DEFAULT_TX_POWER; + break; + } + case PHY_MAX_PAYLOAD: + { + phyParam.Value = MaxPayloadOfDatarateEU868[getPhy->Datarate]; + break; + } + case PHY_MAX_PAYLOAD_REPEATER: + { + phyParam.Value = MaxPayloadOfDatarateRepeaterEU868[getPhy->Datarate]; + break; + } + case PHY_DUTY_CYCLE: + { + phyParam.Value = EU868_DUTY_CYCLE_ENABLED; + break; + } + case PHY_MAX_RX_WINDOW: + { + phyParam.Value = EU868_MAX_RX_WINDOW; + break; + } + case PHY_RECEIVE_DELAY1: + { + phyParam.Value = EU868_RECEIVE_DELAY1; + break; + } + case PHY_RECEIVE_DELAY2: + { + phyParam.Value = EU868_RECEIVE_DELAY2; + break; + } + case PHY_JOIN_ACCEPT_DELAY1: + { + phyParam.Value = EU868_JOIN_ACCEPT_DELAY1; + break; + } + case PHY_JOIN_ACCEPT_DELAY2: + { + phyParam.Value = EU868_JOIN_ACCEPT_DELAY2; + break; + } + case PHY_MAX_FCNT_GAP: + { + phyParam.Value = EU868_MAX_FCNT_GAP; + break; + } + case PHY_ACK_TIMEOUT: + { + phyParam.Value = ( EU868_ACKTIMEOUT + randr( -EU868_ACK_TIMEOUT_RND, EU868_ACK_TIMEOUT_RND ) ); + break; + } + case PHY_DEF_DR1_OFFSET: + { + phyParam.Value = EU868_DEFAULT_RX1_DR_OFFSET; + break; + } + case PHY_DEF_RX2_FREQUENCY: + { + phyParam.Value = EU868_RX_WND_2_FREQ; + break; + } + case PHY_DEF_RX2_DR: + { + phyParam.Value = EU868_RX_WND_2_DR; + break; + } + case PHY_CHANNELS_MASK: + { + phyParam.ChannelsMask = ChannelsMask; + break; + } + case PHY_CHANNELS_DEFAULT_MASK: + { + phyParam.ChannelsMask = ChannelsDefaultMask; + break; + } + case PHY_MAX_NB_CHANNELS: + { + phyParam.Value = EU868_MAX_NB_CHANNELS; + break; + } + case PHY_CHANNELS: + { + phyParam.Channels = Channels; + break; + } + case PHY_DEF_UPLINK_DWELL_TIME: + case PHY_DEF_DOWNLINK_DWELL_TIME: + { + phyParam.Value = 0; + break; + } + case PHY_DEF_MAX_EIRP: + { + phyParam.fValue = EU868_DEFAULT_MAX_EIRP; + break; + } + case PHY_DEF_ANTENNA_GAIN: + { + phyParam.fValue = EU868_DEFAULT_ANTENNA_GAIN; + break; + } + case PHY_NB_JOIN_TRIALS: + case PHY_DEF_NB_JOIN_TRIALS: + { + phyParam.Value = 48; + break; + } + default: + { + break; + } + } + + return phyParam; +} + +void RegionEU868SetBandTxDone( SetBandTxDoneParams_t* txDone ) +{ + RegionCommonSetBandTxDone( txDone->Joined, &Bands[Channels[txDone->Channel].Band], txDone->LastTxDoneTime ); +} + +void RegionEU868InitDefaults( InitType_t type ) +{ + switch( type ) + { + case INIT_TYPE_INIT: + { + // Channels + Channels[0] = ( ChannelParams_t ) EU868_LC1; + Channels[1] = ( ChannelParams_t ) EU868_LC2; + Channels[2] = ( ChannelParams_t ) EU868_LC3; + + // Initialize the channels default mask + ChannelsDefaultMask[0] = LC( 1 ) + LC( 2 ) + LC( 3 ); + // Update the channels mask + RegionCommonChanMaskCopy( ChannelsMask, ChannelsDefaultMask, 1 ); + break; + } + case INIT_TYPE_RESTORE: + { + // Restore channels default mask + ChannelsMask[0] |= ChannelsDefaultMask[0]; + break; + } + default: + { + break; + } + } +} + +bool RegionEU868Verify( VerifyParams_t* verify, PhyAttribute_t phyAttribute ) +{ + switch( phyAttribute ) + { + case PHY_TX_DR: + { + return RegionCommonValueInRange( verify->DatarateParams.Datarate, EU868_TX_MIN_DATARATE, EU868_TX_MAX_DATARATE ); + } + case PHY_DEF_TX_DR: + { + return RegionCommonValueInRange( verify->DatarateParams.Datarate, DR_0, DR_5 ); + } + case PHY_RX_DR: + { + return RegionCommonValueInRange( verify->DatarateParams.Datarate, EU868_RX_MIN_DATARATE, EU868_RX_MAX_DATARATE ); + } + case PHY_DEF_TX_POWER: + case PHY_TX_POWER: + { + // Remark: switched min and max! + return RegionCommonValueInRange( verify->TxPower, EU868_MAX_TX_POWER, EU868_MIN_TX_POWER ); + } + case PHY_DUTY_CYCLE: + { + return EU868_DUTY_CYCLE_ENABLED; + } + case PHY_NB_JOIN_TRIALS: + { + if( verify->NbJoinTrials < 48 ) + { + return false; + } + break; + } + default: + return false; + } + return true; +} + +void RegionEU868ApplyCFList( ApplyCFListParams_t* applyCFList ) +{ + ChannelParams_t newChannel; + ChannelAddParams_t channelAdd; + ChannelRemoveParams_t channelRemove; + + // Setup default datarate range + newChannel.DrRange.Value = ( DR_5 << 4 ) | DR_0; + + // Size of the optional CF list + if( applyCFList->Size != 16 ) + { + return; + } + + // Last byte is RFU, don't take it into account + for( uint8_t i = 0, chanIdx = EU868_NUMB_DEFAULT_CHANNELS; chanIdx < EU868_MAX_NB_CHANNELS; i+=3, chanIdx++ ) + { + if( chanIdx < ( EU868_NUMB_CHANNELS_CF_LIST + EU868_NUMB_DEFAULT_CHANNELS ) ) + { + // Channel frequency + newChannel.Frequency = (uint32_t) applyCFList->Payload[i]; + newChannel.Frequency |= ( (uint32_t) applyCFList->Payload[i + 1] << 8 ); + newChannel.Frequency |= ( (uint32_t) applyCFList->Payload[i + 2] << 16 ); + newChannel.Frequency *= 100; + + // Initialize alternative frequency to 0 + newChannel.Rx1Frequency = 0; + } + else + { + newChannel.Frequency = 0; + newChannel.DrRange.Value = 0; + newChannel.Rx1Frequency = 0; + } + + if( newChannel.Frequency != 0 ) + { + channelAdd.NewChannel = &newChannel; + channelAdd.ChannelId = chanIdx; + + // Try to add all channels + RegionEU868ChannelAdd( &channelAdd ); + } + else + { + channelRemove.ChannelId = chanIdx; + + RegionEU868ChannelsRemove( &channelRemove ); + } + } +} + +bool RegionEU868ChanMaskSet( ChanMaskSetParams_t* chanMaskSet ) +{ + switch( chanMaskSet->ChannelsMaskType ) + { + case CHANNELS_MASK: + { + RegionCommonChanMaskCopy( ChannelsMask, chanMaskSet->ChannelsMaskIn, 1 ); + break; + } + case CHANNELS_DEFAULT_MASK: + { + RegionCommonChanMaskCopy( ChannelsDefaultMask, chanMaskSet->ChannelsMaskIn, 1 ); + break; + } + default: + return false; + } + return true; +} + +bool RegionEU868AdrNext( AdrNextParams_t* adrNext, int8_t* drOut, int8_t* txPowOut, uint32_t* adrAckCounter ) +{ + bool adrAckReq = false; + int8_t datarate = adrNext->Datarate; + int8_t txPower = adrNext->TxPower; + GetPhyParams_t getPhy; + PhyParam_t phyParam; + + // Report back the adr ack counter + *adrAckCounter = adrNext->AdrAckCounter; + + if( adrNext->AdrEnabled == true ) + { + if( datarate == EU868_TX_MIN_DATARATE ) + { + *adrAckCounter = 0; + adrAckReq = false; + } + else + { + if( adrNext->AdrAckCounter >= EU868_ADR_ACK_LIMIT ) + { + adrAckReq = true; + txPower = EU868_MAX_TX_POWER; + } + else + { + adrAckReq = false; + } + if( adrNext->AdrAckCounter >= ( EU868_ADR_ACK_LIMIT + EU868_ADR_ACK_DELAY ) ) + { + if( ( adrNext->AdrAckCounter % EU868_ADR_ACK_DELAY ) == 1 ) + { + // Decrease the datarate + getPhy.Attribute = PHY_NEXT_LOWER_TX_DR; + getPhy.Datarate = datarate; + getPhy.UplinkDwellTime = adrNext->UplinkDwellTime; + phyParam = RegionEU868GetPhyParam( &getPhy ); + datarate = phyParam.Value; + + if( datarate == EU868_TX_MIN_DATARATE ) + { + // We must set adrAckReq to false as soon as we reach the lowest datarate + adrAckReq = false; + if( adrNext->UpdateChanMask == true ) + { + // Re-enable default channels + ChannelsMask[0] |= LC( 1 ) + LC( 2 ) + LC( 3 ); + } + } + } + } + } + } + + *drOut = datarate; + *txPowOut = txPower; + return adrAckReq; +} + +void RegionEU868ComputeRxWindowParameters( int8_t datarate, uint8_t minRxSymbols, uint32_t rxError, RxConfigParams_t *rxConfigParams ) +{ + double tSymbol = 0.0; + + // Get the datarate, perform a boundary check + rxConfigParams->Datarate = MIN( datarate, EU868_RX_MAX_DATARATE ); + rxConfigParams->Bandwidth = GetBandwidth( rxConfigParams->Datarate ); + + if( rxConfigParams->Datarate == DR_7 ) + { // FSK + tSymbol = RegionCommonComputeSymbolTimeFsk( DataratesEU868[rxConfigParams->Datarate] ); + } + else + { // LoRa + tSymbol = RegionCommonComputeSymbolTimeLoRa( DataratesEU868[rxConfigParams->Datarate], BandwidthsEU868[rxConfigParams->Datarate] ); + } + + RegionCommonComputeRxWindowParameters( tSymbol, minRxSymbols, rxError, RADIO_WAKEUP_TIME, &rxConfigParams->WindowTimeout, &rxConfigParams->WindowOffset ); +} + +bool RegionEU868RxConfig( RxConfigParams_t* rxConfig, int8_t* datarate ) +{ + RadioModems_t modem; + int8_t dr = rxConfig->Datarate; + uint8_t maxPayload = 0; + int8_t phyDr = 0; + uint32_t frequency = rxConfig->Frequency; + + if( Radio.GetStatus( ) != RF_IDLE ) + { + return false; + } + + if( rxConfig->Window == 0 ) + { + // Apply window 1 frequency + frequency = Channels[rxConfig->Channel].Frequency; + // Apply the alternative RX 1 window frequency, if it is available + if( Channels[rxConfig->Channel].Rx1Frequency != 0 ) + { + frequency = Channels[rxConfig->Channel].Rx1Frequency; + } + // Add junhua ,return the selected frequency + rxConfig->Frequency = frequency; + } + + // Read the physical datarate from the datarates table + phyDr = DataratesEU868[dr]; + + Radio.SetChannel( frequency ); + + // Radio configuration + if( dr == DR_7 ) + { + modem = MODEM_FSK; + Radio.SetRxConfig( modem, 50000, phyDr * 1000, 0, 83333, 5, rxConfig->WindowTimeout, false, 0, true, 0, 0, false, rxConfig->RxContinuous ); + } + else + { + modem = MODEM_LORA; + Radio.SetRxConfig( modem, rxConfig->Bandwidth, phyDr, 1, 0, 8, rxConfig->WindowTimeout, false, 0, false, 0, 0, true, rxConfig->RxContinuous ); + } + + if( rxConfig->RepeaterSupport == true ) + { + maxPayload = MaxPayloadOfDatarateRepeaterEU868[dr]; + } + else + { + maxPayload = MaxPayloadOfDatarateEU868[dr]; + } + + Radio.SetMaxPayloadLength( modem, maxPayload + LORA_MAC_FRMPAYLOAD_OVERHEAD ); + + *datarate = (uint8_t) dr; + return true; +} + +bool RegionEU868TxConfig( TxConfigParams_t* txConfig, int8_t* txPower, TimerTime_t* txTimeOnAir ) +{ + RadioModems_t modem; + int8_t phyDr = DataratesEU868[txConfig->Datarate]; + int8_t txPowerLimited = LimitTxPower( txConfig->TxPower, Bands[Channels[txConfig->Channel].Band].TxMaxPower, txConfig->Datarate, ChannelsMask ); + uint32_t bandwidth = GetBandwidth( txConfig->Datarate ); + int8_t phyTxPower = 0; + + // Calculate physical TX power + phyTxPower = RegionCommonComputeTxPower( txPowerLimited, txConfig->MaxEirp, txConfig->AntennaGain ); + + // Setup the radio frequency + Radio.SetChannel( Channels[txConfig->Channel].Frequency ); + + if( txConfig->Datarate == DR_7 ) + { // High Speed FSK channel + modem = MODEM_FSK; + Radio.SetTxConfig( modem, phyTxPower, 25000, bandwidth, phyDr * 1000, 0, 5, false, true, 0, 0, false, 3000 ); + } + else + { + modem = MODEM_LORA; + Radio.SetTxConfig( modem, phyTxPower, 0, bandwidth, phyDr, 1, 8, false, true, 0, 0, false, 3000 ); + } + + // Setup maximum payload lenght of the radio driver + Radio.SetMaxPayloadLength( modem, txConfig->PktLen ); + // Get the time-on-air of the next tx frame + *txTimeOnAir = Radio.TimeOnAir( modem, txConfig->PktLen ); + + *txPower = txPowerLimited; + + DPRINTF("\r\nFreq=%d, txP=%d dbm, DR%d ,tm=%d\r\n", Channels[txConfig->Channel].Frequency, phyTxPower, txConfig->Datarate, *txTimeOnAir); + + return true; +} + +uint8_t RegionEU868LinkAdrReq( LinkAdrReqParams_t* linkAdrReq, int8_t* drOut, int8_t* txPowOut, uint8_t* nbRepOut, uint8_t* nbBytesParsed ) +{ + uint8_t status = 0x07; + RegionCommonLinkAdrParams_t linkAdrParams; + uint8_t nextIndex = 0; + uint8_t bytesProcessed = 0; + uint16_t chMask = 0; + GetPhyParams_t getPhy; + PhyParam_t phyParam; + RegionCommonLinkAdrReqVerifyParams_t linkAdrVerifyParams; + + while( bytesProcessed < linkAdrReq->PayloadSize ) + { + // Get ADR request parameters + nextIndex = RegionCommonParseLinkAdrReq( &( linkAdrReq->Payload[bytesProcessed] ), &linkAdrParams ); + + if( nextIndex == 0 ) + break; // break loop, since no more request has been found + + // Update bytes processed + bytesProcessed += nextIndex; + + // Revert status, as we only check the last ADR request for the channel mask KO + status = 0x07; + + // Setup temporary channels mask + chMask = linkAdrParams.ChMask; + + // Verify channels mask + if( ( linkAdrParams.ChMaskCtrl == 0 ) && ( chMask == 0 ) ) + { + status &= 0xFE; // Channel mask KO + } + else if( ( ( linkAdrParams.ChMaskCtrl >= 1 ) && ( linkAdrParams.ChMaskCtrl <= 5 )) || + ( linkAdrParams.ChMaskCtrl >= 7 ) ) + { + // RFU + status &= 0xFE; // Channel mask KO + } + else + { + for( uint8_t i = 0; i < EU868_MAX_NB_CHANNELS; i++ ) + { + if( linkAdrParams.ChMaskCtrl == 6 ) + { + if( Channels[i].Frequency != 0 ) + { + chMask |= 1 << i; + } + } + else + { + if( ( ( chMask & ( 1 << i ) ) != 0 ) && + ( Channels[i].Frequency == 0 ) ) + {// Trying to enable an undefined channel + status &= 0xFE; // Channel mask KO + } + } + } + } + } + + // Get the minimum possible datarate + getPhy.Attribute = PHY_MIN_TX_DR; + getPhy.UplinkDwellTime = linkAdrReq->UplinkDwellTime; + phyParam = RegionEU868GetPhyParam( &getPhy ); + + linkAdrVerifyParams.Status = status; + linkAdrVerifyParams.AdrEnabled = linkAdrReq->AdrEnabled; + linkAdrVerifyParams.Datarate = linkAdrParams.Datarate; + linkAdrVerifyParams.TxPower = linkAdrParams.TxPower; + linkAdrVerifyParams.NbRep = linkAdrParams.NbRep; + linkAdrVerifyParams.CurrentDatarate = linkAdrReq->CurrentDatarate; + linkAdrVerifyParams.CurrentTxPower = linkAdrReq->CurrentTxPower; + linkAdrVerifyParams.CurrentNbRep = linkAdrReq->CurrentNbRep; + linkAdrVerifyParams.NbChannels = EU868_MAX_NB_CHANNELS; + linkAdrVerifyParams.ChannelsMask = &chMask; + linkAdrVerifyParams.MinDatarate = ( int8_t )phyParam.Value; + linkAdrVerifyParams.MaxDatarate = EU868_TX_MAX_DATARATE; + linkAdrVerifyParams.Channels = Channels; + linkAdrVerifyParams.MinTxPower = EU868_MIN_TX_POWER; + linkAdrVerifyParams.MaxTxPower = EU868_MAX_TX_POWER; + + // Verify the parameters and update, if necessary + status = RegionCommonLinkAdrReqVerifyParams( &linkAdrVerifyParams, &linkAdrParams.Datarate, &linkAdrParams.TxPower, &linkAdrParams.NbRep ); + + // Update channelsMask if everything is correct + if( status == 0x07 ) + { + // Set the channels mask to a default value + memset( ChannelsMask, 0, sizeof( ChannelsMask ) ); + // Update the channels mask + ChannelsMask[0] = chMask; + } + + // Update status variables + *drOut = linkAdrParams.Datarate; + *txPowOut = linkAdrParams.TxPower; + *nbRepOut = linkAdrParams.NbRep; + *nbBytesParsed = bytesProcessed; + + return status; +} + +uint8_t RegionEU868RxParamSetupReq( RxParamSetupReqParams_t* rxParamSetupReq ) +{ + uint8_t status = 0x07; + + // Verify radio frequency + if( Radio.CheckRfFrequency( rxParamSetupReq->Frequency ) == false ) + { + status &= 0xFE; // Channel frequency KO + } + + // Verify datarate + if( RegionCommonValueInRange( rxParamSetupReq->Datarate, EU868_RX_MIN_DATARATE, EU868_RX_MAX_DATARATE ) == false ) + { + status &= 0xFD; // Datarate KO + } + + // Verify datarate offset + if( RegionCommonValueInRange( rxParamSetupReq->DrOffset, EU868_MIN_RX1_DR_OFFSET, EU868_MAX_RX1_DR_OFFSET ) == false ) + { + status &= 0xFB; // Rx1DrOffset range KO + } + + return status; +} + +uint8_t RegionEU868NewChannelReq( NewChannelReqParams_t* newChannelReq ) +{ + uint8_t status = 0x03; + ChannelAddParams_t channelAdd; + ChannelRemoveParams_t channelRemove; + + if( newChannelReq->NewChannel->Frequency == 0 ) + { + channelRemove.ChannelId = newChannelReq->ChannelId; + + // Remove + if( RegionEU868ChannelsRemove( &channelRemove ) == false ) + { + status &= 0xFC; + } + } + else + { + channelAdd.NewChannel = newChannelReq->NewChannel; + channelAdd.ChannelId = newChannelReq->ChannelId; + + switch( RegionEU868ChannelAdd( &channelAdd ) ) + { + case LORAMAC_STATUS_OK: + { + break; + } + case LORAMAC_STATUS_FREQUENCY_INVALID: + { + status &= 0xFE; + break; + } + case LORAMAC_STATUS_DATARATE_INVALID: + { + status &= 0xFD; + break; + } + case LORAMAC_STATUS_FREQ_AND_DR_INVALID: + { + status &= 0xFC; + break; + } + default: + { + status &= 0xFC; + break; + } + } + } + + return status; +} + +int8_t RegionEU868TxParamSetupReq( TxParamSetupReqParams_t* txParamSetupReq ) +{ + return -1; +} + +uint8_t RegionEU868DlChannelReq( DlChannelReqParams_t* dlChannelReq ) +{ + uint8_t status = 0x03; + uint8_t band = 0; + + // Verify if the frequency is supported + if( VerifyTxFreq( dlChannelReq->Rx1Frequency, &band ) == false ) + { + status &= 0xFE; + } + + // Verify if an uplink frequency exists + if( Channels[dlChannelReq->ChannelId].Frequency == 0 ) + { + status &= 0xFD; + } + + // Apply Rx1 frequency, if the status is OK + if( status == 0x03 ) + { + Channels[dlChannelReq->ChannelId].Rx1Frequency = dlChannelReq->Rx1Frequency; + } + + return status; +} + +int8_t RegionEU868AlternateDr( AlternateDrParams_t* alternateDr ) +{ + int8_t datarate = 0; + + if( ( alternateDr->NbTrials % 48 ) == 0 ) + { + datarate = DR_0; + } + else if( ( alternateDr->NbTrials % 32 ) == 0 ) + { + datarate = DR_1; + } + else if( ( alternateDr->NbTrials % 24 ) == 0 ) + { + datarate = DR_2; + } + else if( ( alternateDr->NbTrials % 16 ) == 0 ) + { + datarate = DR_3; + } + else if( ( alternateDr->NbTrials % 8 ) == 0 ) + { + datarate = DR_4; + } + else + { + datarate = DR_5; + } + return datarate; +} + +void RegionEU868CalcBackOff( CalcBackOffParams_t* calcBackOff ) +{ + RegionCommonCalcBackOffParams_t calcBackOffParams; + + calcBackOffParams.Channels = Channels; + calcBackOffParams.Bands = Bands; + calcBackOffParams.LastTxIsJoinRequest = calcBackOff->LastTxIsJoinRequest; + calcBackOffParams.Joined = calcBackOff->Joined; + calcBackOffParams.DutyCycleEnabled = calcBackOff->DutyCycleEnabled; + calcBackOffParams.Channel = calcBackOff->Channel; + calcBackOffParams.ElapsedTime = calcBackOff->ElapsedTime; + calcBackOffParams.TxTimeOnAir = calcBackOff->TxTimeOnAir; + + RegionCommonCalcBackOff( &calcBackOffParams ); +} + +bool RegionEU868NextChannel( NextChanParams_t* nextChanParams, uint8_t* channel, TimerTime_t* time, TimerTime_t* aggregatedTimeOff ) +{ + uint8_t nbEnabledChannels = 0; + uint8_t delayTx = 0; + uint8_t enabledChannels[EU868_MAX_NB_CHANNELS] = { 0 }; + TimerTime_t nextTxDelay = 0; + + if( RegionCommonCountChannels( ChannelsMask, 0, 1 ) == 0 ) + { // Reactivate default channels + ChannelsMask[0] |= LC( 1 ) + LC( 2 ) + LC( 3 ); + } + + if( nextChanParams->AggrTimeOff <= TimerGetElapsedTime( nextChanParams->LastAggrTx ) ) + { + // Reset Aggregated time off + *aggregatedTimeOff = 0; + + // Update bands Time OFF + nextTxDelay = RegionCommonUpdateBandTimeOff( nextChanParams->Joined, nextChanParams->DutyCycleEnabled, Bands, EU868_MAX_NB_BANDS ); + + // Search how many channels are enabled + nbEnabledChannels = CountNbOfEnabledChannels( nextChanParams->Joined, nextChanParams->Datarate, + ChannelsMask, Channels, + Bands, enabledChannels, &delayTx ); + } + else + { + delayTx++; + nextTxDelay = nextChanParams->AggrTimeOff - TimerGetElapsedTime( nextChanParams->LastAggrTx ); + } + + if( nbEnabledChannels > 0 ) + { + // We found a valid channel + *channel = enabledChannels[randr( 0, nbEnabledChannels - 1 )]; + + *time = 0; + return true; + } + else + { + if( delayTx > 0 ) + { + // Delay transmission due to AggregatedTimeOff or to a band time off + *time = nextTxDelay; + return true; + } + // Datarate not supported by any channel, restore defaults + ChannelsMask[0] |= LC( 1 ) + LC( 2 ) + LC( 3 ); + *time = 0; + return false; + } +} + +LoRaMacStatus_t RegionEU868ChannelAdd( ChannelAddParams_t* channelAdd ) +{ + uint8_t band = 0; + bool drInvalid = false; + bool freqInvalid = false; + uint8_t id = channelAdd->ChannelId; + + if( id >= EU868_MAX_NB_CHANNELS ) + { + return LORAMAC_STATUS_PARAMETER_INVALID; + } + + // Validate the datarate range + if( RegionCommonValueInRange( channelAdd->NewChannel->DrRange.Fields.Min, EU868_TX_MIN_DATARATE, EU868_TX_MAX_DATARATE ) == false ) + { + drInvalid = true; + } + if( RegionCommonValueInRange( channelAdd->NewChannel->DrRange.Fields.Max, EU868_TX_MIN_DATARATE, EU868_TX_MAX_DATARATE ) == false ) + { + drInvalid = true; + } + if( channelAdd->NewChannel->DrRange.Fields.Min > channelAdd->NewChannel->DrRange.Fields.Max ) + { + drInvalid = true; + } + + // Default channels don't accept all values + if( id < EU868_NUMB_DEFAULT_CHANNELS ) + { + // Validate the datarate range for min: must be DR_0 + if( channelAdd->NewChannel->DrRange.Fields.Min > DR_0 ) + { + drInvalid = true; + } + // Validate the datarate range for max: must be DR_5 <= Max <= TX_MAX_DATARATE + if( RegionCommonValueInRange( channelAdd->NewChannel->DrRange.Fields.Max, DR_5, EU868_TX_MAX_DATARATE ) == false ) + { + drInvalid = true; + } + // We are not allowed to change the frequency + if( channelAdd->NewChannel->Frequency != Channels[id].Frequency ) + { + freqInvalid = true; + } + } + + // Check frequency + if( freqInvalid == false ) + { + if( VerifyTxFreq( channelAdd->NewChannel->Frequency, &band ) == false ) + { + freqInvalid = true; + } + } + + // Check status + if( ( drInvalid == true ) && ( freqInvalid == true ) ) + { + return LORAMAC_STATUS_FREQ_AND_DR_INVALID; + } + if( drInvalid == true ) + { + return LORAMAC_STATUS_DATARATE_INVALID; + } + if( freqInvalid == true ) + { + return LORAMAC_STATUS_FREQUENCY_INVALID; + } + + memcpy( &(Channels[id]), channelAdd->NewChannel, sizeof( Channels[id] ) ); + Channels[id].Band = band; + ChannelsMask[0] |= ( 1 << id ); + return LORAMAC_STATUS_OK; +} + +bool RegionEU868ChannelsRemove( ChannelRemoveParams_t* channelRemove ) +{ + uint8_t id = channelRemove->ChannelId; + + if( id < EU868_NUMB_DEFAULT_CHANNELS ) + { + return false; + } + + // Remove the channel from the list of channels + Channels[id] = ( ChannelParams_t ){ 0, 0, { 0 }, 0 }; + + return RegionCommonChanDisable( ChannelsMask, id, EU868_MAX_NB_CHANNELS ); +} + +void RegionEU868SetContinuousWave( ContinuousWaveParams_t* continuousWave ) +{ + int8_t txPowerLimited = LimitTxPower( continuousWave->TxPower, Bands[Channels[continuousWave->Channel].Band].TxMaxPower, continuousWave->Datarate, ChannelsMask ); + int8_t phyTxPower = 0; + uint32_t frequency = Channels[continuousWave->Channel].Frequency; + + // Calculate physical TX power + phyTxPower = RegionCommonComputeTxPower( txPowerLimited, continuousWave->MaxEirp, continuousWave->AntennaGain ); + + Radio.SetTxContinuousWave( frequency, phyTxPower, continuousWave->Timeout ); +} + +uint8_t RegionEU868ApplyDrOffset( uint8_t downlinkDwellTime, int8_t dr, int8_t drOffset ) +{ + int8_t datarate = dr - drOffset; + + if( datarate < 0 ) + { + datarate = DR_0; + } + return datarate; +} diff --git a/src/mac/region/RegionEU868.h b/src/mac/region/RegionEU868.h new file mode 100755 index 0000000..279021a --- /dev/null +++ b/src/mac/region/RegionEU868.h @@ -0,0 +1,487 @@ +/*! + * \file RegionEU868.h + * + * \brief Region definition for EU868 + * + * \copyright Revised BSD License, see section \ref LICENSE. + * + * \code + * ______ _ + * / _____) _ | | + * ( (____ _____ ____ _| |_ _____ ____| |__ + * \____ \| ___ | (_ _) ___ |/ ___) _ \ + * _____) ) ____| | | || |_| ____( (___| | | | + * (______/|_____)_|_|_| \__)_____)\____)_| |_| + * (C)2013 Semtech + * + * ___ _____ _ ___ _ _____ ___ ___ ___ ___ + * / __|_ _/_\ / __| |/ / __/ _ \| _ \/ __| __| + * \__ \ | |/ _ \ (__| ' <| _| (_) | / (__| _| + * |___/ |_/_/ \_\___|_|\_\_| \___/|_|_\\___|___| + * embedded.connectivity.solutions=============== + * + * \endcode + * + * \author Miguel Luis ( Semtech ) + * + * \author Gregory Cristian ( Semtech ) + * + * \author Daniel Jaeckle ( STACKFORCE ) + * + * \defgroup REGIONEU868 Region EU868 + * Implementation according to LoRaWAN Specification v1.0.2. + * \{ + */ +#ifndef __REGION_EU868_H__ +#define __REGION_EU868_H__ + +/*! + * LoRaMac maximum number of channels + */ +#define EU868_MAX_NB_CHANNELS 16 + +/*! + * Number of default channels + */ +#define EU868_NUMB_DEFAULT_CHANNELS 3 + +/*! + * Number of channels to apply for the CF list + */ +#define EU868_NUMB_CHANNELS_CF_LIST 5 + +/*! + * Minimal datarate that can be used by the node + */ +#define EU868_TX_MIN_DATARATE DR_0 + +/*! + * Maximal datarate that can be used by the node + */ +#define EU868_TX_MAX_DATARATE DR_7 + +/*! + * Minimal datarate that can be used by the node + */ +#define EU868_RX_MIN_DATARATE DR_0 + +/*! + * Maximal datarate that can be used by the node + */ +#define EU868_RX_MAX_DATARATE DR_7 + +/*! + * Default datarate used by the node + */ +#define EU868_DEFAULT_DATARATE DR_0 + +/*! + * Minimal Rx1 receive datarate offset + */ +#define EU868_MIN_RX1_DR_OFFSET 0 + +/*! + * Maximal Rx1 receive datarate offset + */ +#define EU868_MAX_RX1_DR_OFFSET 5 + +/*! + * Default Rx1 receive datarate offset + */ +#define EU868_DEFAULT_RX1_DR_OFFSET 0 + +/*! + * Minimal Tx output power that can be used by the node + */ +#define EU868_MIN_TX_POWER TX_POWER_7 + +/*! + * Maximal Tx output power that can be used by the node + */ +#define EU868_MAX_TX_POWER TX_POWER_0 + +/*! + * Default Tx output power used by the node + */ +#define EU868_DEFAULT_TX_POWER TX_POWER_0 + +/*! + * Default Max EIRP + */ +#define EU868_DEFAULT_MAX_EIRP 16.0f + +/*! + * Default antenna gain + */ +#define EU868_DEFAULT_ANTENNA_GAIN 2.15f + +/*! + * ADR Ack limit + */ +#define EU868_ADR_ACK_LIMIT 64 + +/*! + * ADR Ack delay + */ +#define EU868_ADR_ACK_DELAY 32 + +/*! + * Enabled or disabled the duty cycle + */ +#define EU868_DUTY_CYCLE_ENABLED 1 + +/*! + * Maximum RX window duration + */ +#define EU868_MAX_RX_WINDOW 3000 + +/*! + * Receive delay 1 + */ +#define EU868_RECEIVE_DELAY1 1000 + +/*! + * Receive delay 2 + */ +#define EU868_RECEIVE_DELAY2 2000 + +/*! + * Join accept delay 1 + */ +#define EU868_JOIN_ACCEPT_DELAY1 5000 + +/*! + * Join accept delay 2 + */ +#define EU868_JOIN_ACCEPT_DELAY2 6000 + +/*! + * Maximum frame counter gap + */ +#define EU868_MAX_FCNT_GAP 16384 + +/*! + * Ack timeout + */ +#define EU868_ACKTIMEOUT 2000 + +/*! + * Random ack timeout limits + */ +#define EU868_ACK_TIMEOUT_RND 1000 + +#if ( EU868_DEFAULT_DATARATE > DR_5 ) +#error "A default DR higher than DR_5 may lead to connectivity loss." +#endif + +/*! + * Second reception window channel frequency definition. + */ +#define EU868_RX_WND_2_FREQ 869525000 + +/*! + * Second reception window channel datarate definition. + */ +#define EU868_RX_WND_2_DR DR_0 + +/*! + * Maximum number of bands + */ +#define EU868_MAX_NB_BANDS 5 + +/*! + * Band 0 definition + * { DutyCycle, TxMaxPower, LastTxDoneTime, TimeOff } + */ +#define EU868_BAND0 { 100 , EU868_MAX_TX_POWER, 0, 0 } // 1.0 % + +/*! + * Band 1 definition + * { DutyCycle, TxMaxPower, LastTxDoneTime, TimeOff } + */ +#define EU868_BAND1 { 100 , EU868_MAX_TX_POWER, 0, 0 } // 1.0 % + +/*! + * Band 2 definition + * Band = { DutyCycle, TxMaxPower, LastTxDoneTime, TimeOff } + */ +#define EU868_BAND2 { 1000, EU868_MAX_TX_POWER, 0, 0 } // 0.1 % + +/*! + * Band 2 definition + * Band = { DutyCycle, TxMaxPower, LastTxDoneTime, TimeOff } + */ +#define EU868_BAND3 { 10 , EU868_MAX_TX_POWER, 0, 0 } // 10.0 % + +/*! + * Band 2 definition + * Band = { DutyCycle, TxMaxPower, LastTxDoneTime, TimeOff } + */ +#define EU868_BAND4 { 100 , EU868_MAX_TX_POWER, 0, 0 } // 1.0 % + +/*! + * LoRaMac default channel 1 + * Channel = { Frequency [Hz], RX1 Frequency [Hz], { ( ( DrMax << 4 ) | DrMin ) }, Band } + */ +#define EU868_LC1 { 868100000, 0, { ( ( DR_5 << 4 ) | DR_0 ) }, 1 } + +/*! + * LoRaMac default channel 2 + * Channel = { Frequency [Hz], RX1 Frequency [Hz], { ( ( DrMax << 4 ) | DrMin ) }, Band } + */ +#define EU868_LC2 { 868300000, 0, { ( ( DR_5 << 4 ) | DR_0 ) }, 1 } + +/*! + * LoRaMac default channel 3 + * Channel = { Frequency [Hz], RX1 Frequency [Hz], { ( ( DrMax << 4 ) | DrMin ) }, Band } + */ +#define EU868_LC3 { 868500000, 0, { ( ( DR_5 << 4 ) | DR_0 ) }, 1 } + +/*! + * LoRaMac channels which are allowed for the join procedure + */ +#define EU868_JOIN_CHANNELS ( uint16_t )( LC( 1 ) | LC( 2 ) | LC( 3 ) ) + +/*! + * Data rates table definition + */ +static const uint8_t DataratesEU868[] = { 12, 11, 10, 9, 8, 7, 7, 50 }; + +/*! + * Bandwidths table definition in Hz + */ +static const uint32_t BandwidthsEU868[] = { 125000, 125000, 125000, 125000, 125000, 125000, 250000, 0 }; + +/*! + * Maximum payload with respect to the datarate index. Cannot operate with repeater. + */ +static const uint8_t MaxPayloadOfDatarateEU868[] = { 51, 51, 51, 115, 242, 242, 242, 242 }; + +/*! + * Maximum payload with respect to the datarate index. Can operate with repeater. + */ +static const uint8_t MaxPayloadOfDatarateRepeaterEU868[] = { 51, 51, 51, 115, 222, 222, 222, 222 }; + +/*! + * \brief The function gets a value of a specific phy attribute. + * + * \param [IN] getPhy Pointer to the function parameters. + * + * \retval Returns a structure containing the PHY parameter. + */ +PhyParam_t RegionEU868GetPhyParam( GetPhyParams_t* getPhy ); + +/*! + * \brief Updates the last TX done parameters of the current channel. + * + * \param [IN] txDone Pointer to the function parameters. + */ +void RegionEU868SetBandTxDone( SetBandTxDoneParams_t* txDone ); + +/*! + * \brief Initializes the channels masks and the channels. + * + * \param [IN] type Sets the initialization type. + */ +void RegionEU868InitDefaults( InitType_t type ); + +/*! + * \brief Verifies a parameter. + * + * \param [IN] verify Pointer to the function parameters. + * + * \param [IN] type Sets the initialization type. + * + * \retval Returns true, if the parameter is valid. + */ +bool RegionEU868Verify( VerifyParams_t* verify, PhyAttribute_t phyAttribute ); + +/*! + * \brief The function parses the input buffer and sets up the channels of the + * CF list. + * + * \param [IN] applyCFList Pointer to the function parameters. + */ +void RegionEU868ApplyCFList( ApplyCFListParams_t* applyCFList ); + +/*! + * \brief Sets a channels mask. + * + * \param [IN] chanMaskSet Pointer to the function parameters. + * + * \retval Returns true, if the channels mask could be set. + */ +bool RegionEU868ChanMaskSet( ChanMaskSetParams_t* chanMaskSet ); + +/*! + * \brief Calculates the next datarate to set, when ADR is on or off. + * + * \param [IN] adrNext Pointer to the function parameters. + * + * \param [OUT] drOut The calculated datarate for the next TX. + * + * \param [OUT] txPowOut The TX power for the next TX. + * + * \param [OUT] adrAckCounter The calculated ADR acknowledgement counter. + * + * \retval Returns true, if an ADR request should be performed. + */ +bool RegionEU868AdrNext( AdrNextParams_t* adrNext, int8_t* drOut, int8_t* txPowOut, uint32_t* adrAckCounter ); + +/*! + * Computes the Rx window timeout and offset. + * + * \param [IN] datarate Rx window datarate index to be used + * + * \param [IN] minRxSymbols Minimum required number of symbols to detect an Rx frame. + * + * \param [IN] rxError System maximum timing error of the receiver. In milliseconds + * The receiver will turn on in a [-rxError : +rxError] ms + * interval around RxOffset + * + * \param [OUT]rxConfigParams Returns updated WindowTimeout and WindowOffset fields. + */ +void RegionEU868ComputeRxWindowParameters( int8_t datarate, uint8_t minRxSymbols, uint32_t rxError, RxConfigParams_t *rxConfigParams ); + +/*! + * \brief Configuration of the RX windows. + * + * \param [IN] rxConfig Pointer to the function parameters. + * + * \param [OUT] datarate The datarate index which was set. + * + * \retval Returns true, if the configuration was applied successfully. + */ +bool RegionEU868RxConfig( RxConfigParams_t* rxConfig, int8_t* datarate ); + +/*! + * \brief TX configuration. + * + * \param [IN] txConfig Pointer to the function parameters. + * + * \param [OUT] txPower The tx power index which was set. + * + * \param [OUT] txTimeOnAir The time-on-air of the frame. + * + * \retval Returns true, if the configuration was applied successfully. + */ +bool RegionEU868TxConfig( TxConfigParams_t* txConfig, int8_t* txPower, TimerTime_t* txTimeOnAir ); + +/*! + * \brief The function processes a Link ADR Request. + * + * \param [IN] linkAdrReq Pointer to the function parameters. + * + * \retval Returns the status of the operation, according to the LoRaMAC specification. + */ +uint8_t RegionEU868LinkAdrReq( LinkAdrReqParams_t* linkAdrReq, int8_t* drOut, int8_t* txPowOut, uint8_t* nbRepOut, uint8_t* nbBytesParsed ); + +/*! + * \brief The function processes a RX Parameter Setup Request. + * + * \param [IN] rxParamSetupReq Pointer to the function parameters. + * + * \retval Returns the status of the operation, according to the LoRaMAC specification. + */ +uint8_t RegionEU868RxParamSetupReq( RxParamSetupReqParams_t* rxParamSetupReq ); + +/*! + * \brief The function processes a Channel Request. + * + * \param [IN] newChannelReq Pointer to the function parameters. + * + * \retval Returns the status of the operation, according to the LoRaMAC specification. + */ +uint8_t RegionEU868NewChannelReq( NewChannelReqParams_t* newChannelReq ); + +/*! + * \brief The function processes a TX ParamSetup Request. + * + * \param [IN] txParamSetupReq Pointer to the function parameters. + * + * \retval Returns the status of the operation, according to the LoRaMAC specification. + * Returns -1, if the functionality is not implemented. In this case, the end node + * shall not process the command. + */ +int8_t RegionEU868TxParamSetupReq( TxParamSetupReqParams_t* txParamSetupReq ); + +/*! + * \brief The function processes a DlChannel Request. + * + * \param [IN] dlChannelReq Pointer to the function parameters. + * + * \retval Returns the status of the operation, according to the LoRaMAC specification. + */ +uint8_t RegionEU868DlChannelReq( DlChannelReqParams_t* dlChannelReq ); + +/*! + * \brief Alternates the datarate of the channel for the join request. + * + * \param [IN] alternateDr Pointer to the function parameters. + * + * \retval Datarate to apply. + */ +int8_t RegionEU868AlternateDr( AlternateDrParams_t* alternateDr ); + +/*! + * \brief Calculates the back-off time. + * + * \param [IN] calcBackOff Pointer to the function parameters. + */ +void RegionEU868CalcBackOff( CalcBackOffParams_t* calcBackOff ); + +/*! + * \brief Searches and set the next random available channel + * + * \param [OUT] channel Next channel to use for TX. + * + * \param [OUT] time Time to wait for the next transmission according to the duty + * cycle. + * + * \param [OUT] aggregatedTimeOff Updates the aggregated time off. + * + * \retval Function status [1: OK, 0: Unable to find a channel on the current datarate] + */ +bool RegionEU868NextChannel( NextChanParams_t* nextChanParams, uint8_t* channel, TimerTime_t* time, TimerTime_t* aggregatedTimeOff ); + +/*! + * \brief Adds a channel. + * + * \param [IN] channelAdd Pointer to the function parameters. + * + * \retval Status of the operation. + */ +LoRaMacStatus_t RegionEU868ChannelAdd( ChannelAddParams_t* channelAdd ); + +/*! + * \brief Removes a channel. + * + * \param [IN] channelRemove Pointer to the function parameters. + * + * \retval Returns true, if the channel was removed successfully. + */ +bool RegionEU868ChannelsRemove( ChannelRemoveParams_t* channelRemove ); + +/*! + * \brief Sets the radio into continuous wave mode. + * + * \param [IN] continuousWave Pointer to the function parameters. + */ +void RegionEU868SetContinuousWave( ContinuousWaveParams_t* continuousWave ); + +/*! + * \brief Computes new datarate according to the given offset + * + * \param [IN] downlinkDwellTime Downlink dwell time configuration. 0: No limit, 1: 400ms + * + * \param [IN] dr Current datarate + * + * \param [IN] drOffset Offset to be applied + * + * \retval newDr Computed datarate. + */ +uint8_t RegionEU868ApplyDrOffset( uint8_t downlinkDwellTime, int8_t dr, int8_t drOffset ); + +/*! \} defgroup REGIONEU868 */ + +#endif // __REGION_EU868_H__ diff --git a/src/mac/region/RegionIN865.c b/src/mac/region/RegionIN865.c new file mode 100755 index 0000000..75e2a4b --- /dev/null +++ b/src/mac/region/RegionIN865.c @@ -0,0 +1,1045 @@ +/* + / _____) _ | | +( (____ _____ ____ _| |_ _____ ____| |__ + \____ \| ___ | (_ _) ___ |/ ___) _ \ + _____) ) ____| | | || |_| ____( (___| | | | +(______/|_____)_|_|_| \__)_____)\____)_| |_| + (C)2013 Semtech + ___ _____ _ ___ _ _____ ___ ___ ___ ___ +/ __|_ _/_\ / __| |/ / __/ _ \| _ \/ __| __| +\__ \ | |/ _ \ (__| ' <| _| (_) | / (__| _| +|___/ |_/_/ \_\___|_|\_\_| \___/|_|_\\___|___| +embedded.connectivity.solutions=============== + +Description: LoRa MAC region IN865 implementation + +License: Revised BSD License, see LICENSE.TXT file include in the project + +Maintainer: Miguel Luis ( Semtech ), Gregory Cristian ( Semtech ) and Daniel Jaeckle ( STACKFORCE ) +*/ +#include +#include +#include +#include + +#include "board.h" +#include "LoRaMac.h" + +#include "utilities.h" + +#include "Region.h" +#include "RegionCommon.h" +#include "RegionIN865.h" + +// Definitions +#define CHANNELS_MASK_SIZE 1 + +// Global attributes +/*! + * LoRaMAC channels + */ +static ChannelParams_t Channels[IN865_MAX_NB_CHANNELS]; + +/*! + * LoRaMac bands + */ +static Band_t Bands[IN865_MAX_NB_BANDS] = +{ + IN865_BAND0 +}; + +/*! + * LoRaMac channels mask + */ +static uint16_t ChannelsMask[CHANNELS_MASK_SIZE]; + +/*! + * LoRaMac channels default mask + */ +static uint16_t ChannelsDefaultMask[CHANNELS_MASK_SIZE]; + +// Static functions +static int8_t GetNextLowerTxDr( int8_t dr, int8_t minDr ) +{ + uint8_t nextLowerDr = 0; + + if( dr == minDr ) + { + nextLowerDr = minDr; + } + else if( dr == DR_7 ) + { + nextLowerDr = DR_5; + } + else + { + nextLowerDr = dr - 1; + } + return nextLowerDr; +} + +static uint32_t GetBandwidth( uint32_t drIndex ) +{ + switch( BandwidthsIN865[drIndex] ) + { + default: + case 125000: + return 0; + case 250000: + return 1; + case 500000: + return 2; + } +} + +static int8_t LimitTxPower( int8_t txPower, int8_t maxBandTxPower, int8_t datarate, uint16_t* channelsMask ) +{ + int8_t txPowerResult = txPower; + + // Limit tx power to the band max + txPowerResult = MAX( txPower, maxBandTxPower ); + + return txPowerResult; +} + +static bool VerifyTxFreq( uint32_t freq, uint8_t *band ) +{ + // Check radio driver support + if( Radio.CheckRfFrequency( freq ) == false ) + { + return false; + } + + if( ( freq < 865000000 ) || ( freq > 867000000 ) ) + { + return false; + } + return true; +} + +static uint8_t CountNbOfEnabledChannels( bool joined, uint8_t datarate, uint16_t* channelsMask, ChannelParams_t* channels, Band_t* bands, uint8_t* enabledChannels, uint8_t* delayTx ) +{ + uint8_t nbEnabledChannels = 0; + uint8_t delayTransmission = 0; + + for( uint8_t i = 0, k = 0; i < IN865_MAX_NB_CHANNELS; i += 16, k++ ) + { + for( uint8_t j = 0; j < 16; j++ ) + { + if( ( channelsMask[k] & ( 1 << j ) ) != 0 ) + { + if( channels[i + j].Frequency == 0 ) + { // Check if the channel is enabled + continue; + } + if( joined == false ) + { + if( ( IN865_JOIN_CHANNELS & ( 1 << j ) ) == 0 ) + { + continue; + } + } + if( RegionCommonValueInRange( datarate, channels[i + j].DrRange.Fields.Min, + channels[i + j].DrRange.Fields.Max ) == false ) + { // Check if the current channel selection supports the given datarate + continue; + } + if( bands[channels[i + j].Band].TimeOff > 0 ) + { // Check if the band is available for transmission + delayTransmission++; + continue; + } + enabledChannels[nbEnabledChannels++] = i + j; + } + } + } + + *delayTx = delayTransmission; + return nbEnabledChannels; +} + +PhyParam_t RegionIN865GetPhyParam( GetPhyParams_t* getPhy ) +{ + PhyParam_t phyParam = { 0 }; + + switch( getPhy->Attribute ) + { + case PHY_MIN_RX_DR: + { + phyParam.Value = IN865_RX_MIN_DATARATE; + break; + } + case PHY_MIN_TX_DR: + { + phyParam.Value = IN865_TX_MIN_DATARATE; + break; + } + case PHY_DEF_TX_DR: + { + phyParam.Value = IN865_DEFAULT_DATARATE; + break; + } + case PHY_NEXT_LOWER_TX_DR: + { + phyParam.Value = GetNextLowerTxDr( getPhy->Datarate, IN865_TX_MIN_DATARATE ); + break; + } + case PHY_DEF_TX_POWER: + { + phyParam.Value = IN865_DEFAULT_TX_POWER; + break; + } + case PHY_MAX_PAYLOAD: + { + phyParam.Value = MaxPayloadOfDatarateIN865[getPhy->Datarate]; + break; + } + case PHY_MAX_PAYLOAD_REPEATER: + { + phyParam.Value = MaxPayloadOfDatarateRepeaterIN865[getPhy->Datarate]; + break; + } + case PHY_DUTY_CYCLE: + { + phyParam.Value = IN865_DUTY_CYCLE_ENABLED; + break; + } + case PHY_MAX_RX_WINDOW: + { + phyParam.Value = IN865_MAX_RX_WINDOW; + break; + } + case PHY_RECEIVE_DELAY1: + { + phyParam.Value = IN865_RECEIVE_DELAY1; + break; + } + case PHY_RECEIVE_DELAY2: + { + phyParam.Value = IN865_RECEIVE_DELAY2; + break; + } + case PHY_JOIN_ACCEPT_DELAY1: + { + phyParam.Value = IN865_JOIN_ACCEPT_DELAY1; + break; + } + case PHY_JOIN_ACCEPT_DELAY2: + { + phyParam.Value = IN865_JOIN_ACCEPT_DELAY2; + break; + } + case PHY_MAX_FCNT_GAP: + { + phyParam.Value = IN865_MAX_FCNT_GAP; + break; + } + case PHY_ACK_TIMEOUT: + { + phyParam.Value = ( IN865_ACKTIMEOUT + randr( -IN865_ACK_TIMEOUT_RND, IN865_ACK_TIMEOUT_RND ) ); + break; + } + case PHY_DEF_DR1_OFFSET: + { + phyParam.Value = IN865_DEFAULT_RX1_DR_OFFSET; + break; + } + case PHY_DEF_RX2_FREQUENCY: + { + phyParam.Value = IN865_RX_WND_2_FREQ; + break; + } + case PHY_DEF_RX2_DR: + { + phyParam.Value = IN865_RX_WND_2_DR; + break; + } + case PHY_CHANNELS_MASK: + { + phyParam.ChannelsMask = ChannelsMask; + break; + } + case PHY_CHANNELS_DEFAULT_MASK: + { + phyParam.ChannelsMask = ChannelsDefaultMask; + break; + } + case PHY_MAX_NB_CHANNELS: + { + phyParam.Value = IN865_MAX_NB_CHANNELS; + break; + } + case PHY_CHANNELS: + { + phyParam.Channels = Channels; + break; + } + case PHY_DEF_UPLINK_DWELL_TIME: + case PHY_DEF_DOWNLINK_DWELL_TIME: + { + phyParam.Value = 0; + break; + } + case PHY_DEF_MAX_EIRP: + { + phyParam.fValue = IN865_DEFAULT_MAX_EIRP; + break; + } + case PHY_DEF_ANTENNA_GAIN: + { + phyParam.fValue = IN865_DEFAULT_ANTENNA_GAIN; + break; + } + case PHY_NB_JOIN_TRIALS: + case PHY_DEF_NB_JOIN_TRIALS: + { + phyParam.Value = 48; + break; + } + default: + { + break; + } + } + + return phyParam; +} + +void RegionIN865SetBandTxDone( SetBandTxDoneParams_t* txDone ) +{ + RegionCommonSetBandTxDone( txDone->Joined, &Bands[Channels[txDone->Channel].Band], txDone->LastTxDoneTime ); +} + +void RegionIN865InitDefaults( InitType_t type ) +{ + switch( type ) + { + case INIT_TYPE_INIT: + { + // Channels + Channels[0] = ( ChannelParams_t ) IN865_LC1; + Channels[1] = ( ChannelParams_t ) IN865_LC2; + Channels[2] = ( ChannelParams_t ) IN865_LC3; + + // Initialize the channels default mask + ChannelsDefaultMask[0] = LC( 1 ) + LC( 2 ) + LC( 3 ); + // Update the channels mask + RegionCommonChanMaskCopy( ChannelsMask, ChannelsDefaultMask, 1 ); + break; + } + case INIT_TYPE_RESTORE: + { + // Restore channels default mask + ChannelsMask[0] |= ChannelsDefaultMask[0]; + break; + } + default: + { + break; + } + } +} + +bool RegionIN865Verify( VerifyParams_t* verify, PhyAttribute_t phyAttribute ) +{ + switch( phyAttribute ) + { + case PHY_TX_DR: + { + return RegionCommonValueInRange( verify->DatarateParams.Datarate, IN865_TX_MIN_DATARATE, IN865_TX_MAX_DATARATE ); + } + case PHY_DEF_TX_DR: + { + return RegionCommonValueInRange( verify->DatarateParams.Datarate, DR_0, DR_5 ); + } + case PHY_RX_DR: + { + return RegionCommonValueInRange( verify->DatarateParams.Datarate, IN865_RX_MIN_DATARATE, IN865_RX_MAX_DATARATE ); + } + case PHY_DEF_TX_POWER: + case PHY_TX_POWER: + { + // Remark: switched min and max! + return RegionCommonValueInRange( verify->TxPower, IN865_MAX_TX_POWER, IN865_MIN_TX_POWER ); + } + case PHY_DUTY_CYCLE: + { + return IN865_DUTY_CYCLE_ENABLED; + } + case PHY_NB_JOIN_TRIALS: + { + if( verify->NbJoinTrials < 48 ) + { + return false; + } + break; + } + default: + return false; + } + return true; +} + +void RegionIN865ApplyCFList( ApplyCFListParams_t* applyCFList ) +{ + ChannelParams_t newChannel; + ChannelAddParams_t channelAdd; + ChannelRemoveParams_t channelRemove; + + // Setup default datarate range + newChannel.DrRange.Value = ( DR_5 << 4 ) | DR_0; + + // Size of the optional CF list + if( applyCFList->Size != 16 ) + { + return; + } + + // Last byte is RFU, don't take it into account + for( uint8_t i = 0, chanIdx = IN865_NUMB_DEFAULT_CHANNELS; chanIdx < IN865_MAX_NB_CHANNELS; i+=3, chanIdx++ ) + { + if( chanIdx < ( IN865_NUMB_CHANNELS_CF_LIST + IN865_NUMB_DEFAULT_CHANNELS ) ) + { + // Channel frequency + newChannel.Frequency = (uint32_t) applyCFList->Payload[i]; + newChannel.Frequency |= ( (uint32_t) applyCFList->Payload[i + 1] << 8 ); + newChannel.Frequency |= ( (uint32_t) applyCFList->Payload[i + 2] << 16 ); + newChannel.Frequency *= 100; + + // Initialize alternative frequency to 0 + newChannel.Rx1Frequency = 0; + } + else + { + newChannel.Frequency = 0; + newChannel.DrRange.Value = 0; + newChannel.Rx1Frequency = 0; + } + + if( newChannel.Frequency != 0 ) + { + channelAdd.NewChannel = &newChannel; + channelAdd.ChannelId = chanIdx; + + // Try to add all channels + RegionIN865ChannelAdd( &channelAdd ); + } + else + { + channelRemove.ChannelId = chanIdx; + + RegionIN865ChannelsRemove( &channelRemove ); + } + } +} + +bool RegionIN865ChanMaskSet( ChanMaskSetParams_t* chanMaskSet ) +{ + switch( chanMaskSet->ChannelsMaskType ) + { + case CHANNELS_MASK: + { + RegionCommonChanMaskCopy( ChannelsMask, chanMaskSet->ChannelsMaskIn, 1 ); + break; + } + case CHANNELS_DEFAULT_MASK: + { + RegionCommonChanMaskCopy( ChannelsDefaultMask, chanMaskSet->ChannelsMaskIn, 1 ); + break; + } + default: + return false; + } + return true; +} + +bool RegionIN865AdrNext( AdrNextParams_t* adrNext, int8_t* drOut, int8_t* txPowOut, uint32_t* adrAckCounter ) +{ + bool adrAckReq = false; + int8_t datarate = adrNext->Datarate; + int8_t txPower = adrNext->TxPower; + GetPhyParams_t getPhy; + PhyParam_t phyParam; + + // Report back the adr ack counter + *adrAckCounter = adrNext->AdrAckCounter; + + if( adrNext->AdrEnabled == true ) + { + if( datarate == IN865_TX_MIN_DATARATE ) + { + *adrAckCounter = 0; + adrAckReq = false; + } + else + { + if( adrNext->AdrAckCounter >= IN865_ADR_ACK_LIMIT ) + { + adrAckReq = true; + txPower = IN865_MAX_TX_POWER; + } + else + { + adrAckReq = false; + } + if( adrNext->AdrAckCounter >= ( IN865_ADR_ACK_LIMIT + IN865_ADR_ACK_DELAY ) ) + { + if( ( adrNext->AdrAckCounter % IN865_ADR_ACK_DELAY ) == 1 ) + { + // Decrease the datarate + getPhy.Attribute = PHY_NEXT_LOWER_TX_DR; + getPhy.Datarate = datarate; + getPhy.UplinkDwellTime = adrNext->UplinkDwellTime; + phyParam = RegionIN865GetPhyParam( &getPhy ); + datarate = phyParam.Value; + + if( datarate == IN865_TX_MIN_DATARATE ) + { + // We must set adrAckReq to false as soon as we reach the lowest datarate + adrAckReq = false; + if( adrNext->UpdateChanMask == true ) + { + // Re-enable default channels + ChannelsMask[0] |= LC( 1 ) + LC( 2 ) + LC( 3 ); + } + } + } + } + } + } + + *drOut = datarate; + *txPowOut = txPower; + return adrAckReq; +} + +void RegionIN865ComputeRxWindowParameters( int8_t datarate, uint8_t minRxSymbols, uint32_t rxError, RxConfigParams_t *rxConfigParams ) +{ + double tSymbol = 0.0; + + // Get the datarate, perform a boundary check + rxConfigParams->Datarate = MIN( datarate, IN865_RX_MAX_DATARATE ); + rxConfigParams->Bandwidth = GetBandwidth( rxConfigParams->Datarate ); + + if( rxConfigParams->Datarate == DR_7 ) + { // FSK + tSymbol = RegionCommonComputeSymbolTimeFsk( DataratesIN865[rxConfigParams->Datarate] ); + } + else + { // LoRa + tSymbol = RegionCommonComputeSymbolTimeLoRa( DataratesIN865[rxConfigParams->Datarate], BandwidthsIN865[rxConfigParams->Datarate] ); + } + + RegionCommonComputeRxWindowParameters( tSymbol, minRxSymbols, rxError, RADIO_WAKEUP_TIME, &rxConfigParams->WindowTimeout, &rxConfigParams->WindowOffset ); +} + +bool RegionIN865RxConfig( RxConfigParams_t* rxConfig, int8_t* datarate ) +{ + RadioModems_t modem; + int8_t dr = rxConfig->Datarate; + uint8_t maxPayload = 0; + int8_t phyDr = 0; + uint32_t frequency = rxConfig->Frequency; + + if( Radio.GetStatus( ) != RF_IDLE ) + { + return false; + } + + if( rxConfig->Window == 0 ) + { + // Apply window 1 frequency + frequency = Channels[rxConfig->Channel].Frequency; + // Apply the alternative RX 1 window frequency, if it is available + if( Channels[rxConfig->Channel].Rx1Frequency != 0 ) + { + frequency = Channels[rxConfig->Channel].Rx1Frequency; + } + } + + // Read the physical datarate from the datarates table + phyDr = DataratesIN865[dr]; + + Radio.SetChannel( frequency ); + + // Radio configuration + if( dr == DR_7 ) + { + modem = MODEM_FSK; + Radio.SetRxConfig( modem, 50000, phyDr * 1000, 0, 83333, 5, rxConfig->WindowTimeout, false, 0, true, 0, 0, false, rxConfig->RxContinuous ); + } + else + { + modem = MODEM_LORA; + Radio.SetRxConfig( modem, rxConfig->Bandwidth, phyDr, 1, 0, 8, rxConfig->WindowTimeout, false, 0, false, 0, 0, true, rxConfig->RxContinuous ); + } + + if( rxConfig->RepeaterSupport == true ) + { + maxPayload = MaxPayloadOfDatarateRepeaterIN865[dr]; + } + else + { + maxPayload = MaxPayloadOfDatarateIN865[dr]; + } + Radio.SetMaxPayloadLength( modem, maxPayload + LORA_MAC_FRMPAYLOAD_OVERHEAD ); + + *datarate = (uint8_t) dr; + return true; +} + +bool RegionIN865TxConfig( TxConfigParams_t* txConfig, int8_t* txPower, TimerTime_t* txTimeOnAir ) +{ + RadioModems_t modem; + int8_t phyDr = DataratesIN865[txConfig->Datarate]; + int8_t txPowerLimited = LimitTxPower( txConfig->TxPower, Bands[Channels[txConfig->Channel].Band].TxMaxPower, txConfig->Datarate, ChannelsMask ); + uint32_t bandwidth = GetBandwidth( txConfig->Datarate ); + int8_t phyTxPower = 0; + + // Calculate physical TX power + phyTxPower = RegionCommonComputeTxPower( txPowerLimited, txConfig->MaxEirp, txConfig->AntennaGain ); + + // Setup the radio frequency + Radio.SetChannel( Channels[txConfig->Channel].Frequency ); + + if( txConfig->Datarate == DR_7 ) + { // High Speed FSK channel + modem = MODEM_FSK; + Radio.SetTxConfig( modem, phyTxPower, 25000, bandwidth, phyDr * 1000, 0, 5, false, true, 0, 0, false, 3000 ); + } + else + { + modem = MODEM_LORA; + Radio.SetTxConfig( modem, phyTxPower, 0, bandwidth, phyDr, 1, 8, false, true, 0, 0, false, 3000 ); + } + + // Setup maximum payload lenght of the radio driver + Radio.SetMaxPayloadLength( modem, txConfig->PktLen ); + // Get the time-on-air of the next tx frame + *txTimeOnAir = Radio.TimeOnAir( modem, txConfig->PktLen ); + + *txPower = txPowerLimited; + return true; +} + +uint8_t RegionIN865LinkAdrReq( LinkAdrReqParams_t* linkAdrReq, int8_t* drOut, int8_t* txPowOut, uint8_t* nbRepOut, uint8_t* nbBytesParsed ) +{ + uint8_t status = 0x07; + RegionCommonLinkAdrParams_t linkAdrParams; + uint8_t nextIndex = 0; + uint8_t bytesProcessed = 0; + uint16_t chMask = 0; + GetPhyParams_t getPhy; + PhyParam_t phyParam; + RegionCommonLinkAdrReqVerifyParams_t linkAdrVerifyParams; + + while( bytesProcessed < linkAdrReq->PayloadSize ) + { + // Get ADR request parameters + nextIndex = RegionCommonParseLinkAdrReq( &( linkAdrReq->Payload[bytesProcessed] ), &linkAdrParams ); + + if( nextIndex == 0 ) + break; // break loop, since no more request has been found + + // Update bytes processed + bytesProcessed += nextIndex; + + // Revert status, as we only check the last ADR request for the channel mask KO + status = 0x07; + + // Setup temporary channels mask + chMask = linkAdrParams.ChMask; + + // Verify channels mask + if( ( linkAdrParams.ChMaskCtrl == 0 ) && ( chMask == 0 ) ) + { + status &= 0xFE; // Channel mask KO + } + else if( ( ( linkAdrParams.ChMaskCtrl >= 1 ) && ( linkAdrParams.ChMaskCtrl <= 5 )) || + ( linkAdrParams.ChMaskCtrl >= 7 ) ) + { + // RFU + status &= 0xFE; // Channel mask KO + } + else + { + for( uint8_t i = 0; i < IN865_MAX_NB_CHANNELS; i++ ) + { + if( linkAdrParams.ChMaskCtrl == 6 ) + { + if( Channels[i].Frequency != 0 ) + { + chMask |= 1 << i; + } + } + else + { + if( ( ( chMask & ( 1 << i ) ) != 0 ) && + ( Channels[i].Frequency == 0 ) ) + {// Trying to enable an undefined channel + status &= 0xFE; // Channel mask KO + } + } + } + } + } + + // Get the minimum possible datarate + getPhy.Attribute = PHY_MIN_TX_DR; + getPhy.UplinkDwellTime = linkAdrReq->UplinkDwellTime; + phyParam = RegionIN865GetPhyParam( &getPhy ); + + linkAdrVerifyParams.Status = status; + linkAdrVerifyParams.AdrEnabled = linkAdrReq->AdrEnabled; + linkAdrVerifyParams.Datarate = linkAdrParams.Datarate; + linkAdrVerifyParams.TxPower = linkAdrParams.TxPower; + linkAdrVerifyParams.NbRep = linkAdrParams.NbRep; + linkAdrVerifyParams.CurrentDatarate = linkAdrReq->CurrentDatarate; + linkAdrVerifyParams.CurrentTxPower = linkAdrReq->CurrentTxPower; + linkAdrVerifyParams.CurrentNbRep = linkAdrReq->CurrentNbRep; + linkAdrVerifyParams.NbChannels = IN865_MAX_NB_CHANNELS; + linkAdrVerifyParams.ChannelsMask = &chMask; + linkAdrVerifyParams.MinDatarate = ( int8_t )phyParam.Value; + linkAdrVerifyParams.MaxDatarate = IN865_TX_MAX_DATARATE; + linkAdrVerifyParams.Channels = Channels; + linkAdrVerifyParams.MinTxPower = IN865_MIN_TX_POWER; + linkAdrVerifyParams.MaxTxPower = IN865_MAX_TX_POWER; + + // Verify the parameters and update, if necessary + status = RegionCommonLinkAdrReqVerifyParams( &linkAdrVerifyParams, &linkAdrParams.Datarate, &linkAdrParams.TxPower, &linkAdrParams.NbRep ); + + // Update channelsMask if everything is correct + if( status == 0x07 ) + { + // Set the channels mask to a default value + memset( ChannelsMask, 0, sizeof( ChannelsMask ) ); + // Update the channels mask + ChannelsMask[0] = chMask; + } + + // Update status variables + *drOut = linkAdrParams.Datarate; + *txPowOut = linkAdrParams.TxPower; + *nbRepOut = linkAdrParams.NbRep; + *nbBytesParsed = bytesProcessed; + + return status; +} + +uint8_t RegionIN865RxParamSetupReq( RxParamSetupReqParams_t* rxParamSetupReq ) +{ + uint8_t status = 0x07; + + // Verify radio frequency + if( Radio.CheckRfFrequency( rxParamSetupReq->Frequency ) == false ) + { + status &= 0xFE; // Channel frequency KO + } + + // Verify datarate + if( RegionCommonValueInRange( rxParamSetupReq->Datarate, IN865_RX_MIN_DATARATE, IN865_RX_MAX_DATARATE ) == false ) + { + status &= 0xFD; // Datarate KO + } + + // Verify datarate offset + if( RegionCommonValueInRange( rxParamSetupReq->DrOffset, IN865_MIN_RX1_DR_OFFSET, IN865_MAX_RX1_DR_OFFSET ) == false ) + { + status &= 0xFB; // Rx1DrOffset range KO + } + + return status; +} + +uint8_t RegionIN865NewChannelReq( NewChannelReqParams_t* newChannelReq ) +{ + uint8_t status = 0x03; + ChannelAddParams_t channelAdd; + ChannelRemoveParams_t channelRemove; + + if( newChannelReq->NewChannel->Frequency == 0 ) + { + channelRemove.ChannelId = newChannelReq->ChannelId; + + // Remove + if( RegionIN865ChannelsRemove( &channelRemove ) == false ) + { + status &= 0xFC; + } + } + else + { + channelAdd.NewChannel = newChannelReq->NewChannel; + channelAdd.ChannelId = newChannelReq->ChannelId; + + switch( RegionIN865ChannelAdd( &channelAdd ) ) + { + case LORAMAC_STATUS_OK: + { + break; + } + case LORAMAC_STATUS_FREQUENCY_INVALID: + { + status &= 0xFE; + break; + } + case LORAMAC_STATUS_DATARATE_INVALID: + { + status &= 0xFD; + break; + } + case LORAMAC_STATUS_FREQ_AND_DR_INVALID: + { + status &= 0xFC; + break; + } + default: + { + status &= 0xFC; + break; + } + } + } + + return status; +} + +int8_t RegionIN865TxParamSetupReq( TxParamSetupReqParams_t* txParamSetupReq ) +{ + return -1; +} + +uint8_t RegionIN865DlChannelReq( DlChannelReqParams_t* dlChannelReq ) +{ + uint8_t status = 0x03; + uint8_t band = 0; + + // Verify if the frequency is supported + if( VerifyTxFreq( dlChannelReq->Rx1Frequency, &band ) == false ) + { + status &= 0xFE; + } + + // Verify if an uplink frequency exists + if( Channels[dlChannelReq->ChannelId].Frequency == 0 ) + { + status &= 0xFD; + } + + // Apply Rx1 frequency, if the status is OK + if( status == 0x03 ) + { + Channels[dlChannelReq->ChannelId].Rx1Frequency = dlChannelReq->Rx1Frequency; + } + + return status; +} + +int8_t RegionIN865AlternateDr( AlternateDrParams_t* alternateDr ) +{ + int8_t datarate = 0; + + if( ( alternateDr->NbTrials % 48 ) == 0 ) + { + datarate = DR_0; + } + else if( ( alternateDr->NbTrials % 32 ) == 0 ) + { + datarate = DR_1; + } + else if( ( alternateDr->NbTrials % 24 ) == 0 ) + { + datarate = DR_2; + } + else if( ( alternateDr->NbTrials % 16 ) == 0 ) + { + datarate = DR_3; + } + else if( ( alternateDr->NbTrials % 8 ) == 0 ) + { + datarate = DR_4; + } + else + { + datarate = DR_5; + } + return datarate; +} + +void RegionIN865CalcBackOff( CalcBackOffParams_t* calcBackOff ) +{ + RegionCommonCalcBackOffParams_t calcBackOffParams; + + calcBackOffParams.Channels = Channels; + calcBackOffParams.Bands = Bands; + calcBackOffParams.LastTxIsJoinRequest = calcBackOff->LastTxIsJoinRequest; + calcBackOffParams.Joined = calcBackOff->Joined; + calcBackOffParams.DutyCycleEnabled = calcBackOff->DutyCycleEnabled; + calcBackOffParams.Channel = calcBackOff->Channel; + calcBackOffParams.ElapsedTime = calcBackOff->ElapsedTime; + calcBackOffParams.TxTimeOnAir = calcBackOff->TxTimeOnAir; + + RegionCommonCalcBackOff( &calcBackOffParams ); +} + +bool RegionIN865NextChannel( NextChanParams_t* nextChanParams, uint8_t* channel, TimerTime_t* time, TimerTime_t* aggregatedTimeOff ) +{ + uint8_t nbEnabledChannels = 0; + uint8_t delayTx = 0; + uint8_t enabledChannels[IN865_MAX_NB_CHANNELS] = { 0 }; + TimerTime_t nextTxDelay = 0; + + if( RegionCommonCountChannels( ChannelsMask, 0, 1 ) == 0 ) + { // Reactivate default channels + ChannelsMask[0] |= LC( 1 ) + LC( 2 ) + LC( 3 ); + } + + if( nextChanParams->AggrTimeOff <= TimerGetElapsedTime( nextChanParams->LastAggrTx ) ) + { + // Reset Aggregated time off + *aggregatedTimeOff = 0; + + // Update bands Time OFF + nextTxDelay = RegionCommonUpdateBandTimeOff( nextChanParams->Joined, nextChanParams->DutyCycleEnabled, Bands, IN865_MAX_NB_BANDS ); + + // Search how many channels are enabled + nbEnabledChannels = CountNbOfEnabledChannels( nextChanParams->Joined, nextChanParams->Datarate, + ChannelsMask, Channels, + Bands, enabledChannels, &delayTx ); + } + else + { + delayTx++; + nextTxDelay = nextChanParams->AggrTimeOff - TimerGetElapsedTime( nextChanParams->LastAggrTx ); + } + + if( nbEnabledChannels > 0 ) + { + // We found a valid channel + *channel = enabledChannels[randr( 0, nbEnabledChannels - 1 )]; + + *time = 0; + return true; + } + else + { + if( delayTx > 0 ) + { + // Delay transmission due to AggregatedTimeOff or to a band time off + *time = nextTxDelay; + return true; + } + // Datarate not supported by any channel, restore defaults + ChannelsMask[0] |= LC( 1 ) + LC( 2 ) + LC( 3 ); + *time = 0; + return false; + } +} + +LoRaMacStatus_t RegionIN865ChannelAdd( ChannelAddParams_t* channelAdd ) +{ + uint8_t band = 0; + bool drInvalid = false; + bool freqInvalid = false; + uint8_t id = channelAdd->ChannelId; + + if( id >= IN865_MAX_NB_CHANNELS ) + { + return LORAMAC_STATUS_PARAMETER_INVALID; + } + + // Validate the datarate range + if( RegionCommonValueInRange( channelAdd->NewChannel->DrRange.Fields.Min, IN865_TX_MIN_DATARATE, IN865_TX_MAX_DATARATE ) == false ) + { + drInvalid = true; + } + if( RegionCommonValueInRange( channelAdd->NewChannel->DrRange.Fields.Max, IN865_TX_MIN_DATARATE, IN865_TX_MAX_DATARATE ) == false ) + { + drInvalid = true; + } + if( channelAdd->NewChannel->DrRange.Fields.Min > channelAdd->NewChannel->DrRange.Fields.Max ) + { + drInvalid = true; + } + + // Default channels don't accept all values + if( id < IN865_NUMB_DEFAULT_CHANNELS ) + { + // Validate the datarate range for min: must be DR_0 + if( channelAdd->NewChannel->DrRange.Fields.Min > DR_0 ) + { + drInvalid = true; + } + // Validate the datarate range for max: must be DR_5 <= Max <= TX_MAX_DATARATE + if( RegionCommonValueInRange( channelAdd->NewChannel->DrRange.Fields.Max, DR_5, IN865_TX_MAX_DATARATE ) == false ) + { + drInvalid = true; + } + // We are not allowed to change the frequency + if( channelAdd->NewChannel->Frequency != Channels[id].Frequency ) + { + freqInvalid = true; + } + } + + // Check frequency + if( freqInvalid == false ) + { + if( VerifyTxFreq( channelAdd->NewChannel->Frequency, &band ) == false ) + { + freqInvalid = true; + } + } + + // Check status + if( ( drInvalid == true ) && ( freqInvalid == true ) ) + { + return LORAMAC_STATUS_FREQ_AND_DR_INVALID; + } + if( drInvalid == true ) + { + return LORAMAC_STATUS_DATARATE_INVALID; + } + if( freqInvalid == true ) + { + return LORAMAC_STATUS_FREQUENCY_INVALID; + } + + memcpy( &(Channels[id]), channelAdd->NewChannel, sizeof( Channels[id] ) ); + Channels[id].Band = band; + ChannelsMask[0] |= ( 1 << id ); + return LORAMAC_STATUS_OK; +} + +bool RegionIN865ChannelsRemove( ChannelRemoveParams_t* channelRemove ) +{ + uint8_t id = channelRemove->ChannelId; + + if( id < IN865_NUMB_DEFAULT_CHANNELS ) + { + return false; + } + + // Remove the channel from the list of channels + Channels[id] = ( ChannelParams_t ){ 0, 0, { 0 }, 0 }; + + return RegionCommonChanDisable( ChannelsMask, id, IN865_MAX_NB_CHANNELS ); +} + +void RegionIN865SetContinuousWave( ContinuousWaveParams_t* continuousWave ) +{ + int8_t txPowerLimited = LimitTxPower( continuousWave->TxPower, Bands[Channels[continuousWave->Channel].Band].TxMaxPower, continuousWave->Datarate, ChannelsMask ); + int8_t phyTxPower = 0; + uint32_t frequency = Channels[continuousWave->Channel].Frequency; + + // Calculate physical TX power + phyTxPower = RegionCommonComputeTxPower( txPowerLimited, continuousWave->MaxEirp, continuousWave->AntennaGain ); + + Radio.SetTxContinuousWave( frequency, phyTxPower, continuousWave->Timeout ); +} + +uint8_t RegionIN865ApplyDrOffset( uint8_t downlinkDwellTime, int8_t dr, int8_t drOffset ) +{ + // Apply offset formula + return MIN( DR_5, MAX( DR_0, dr - EffectiveRx1DrOffsetIN865[drOffset] ) ); +} diff --git a/src/mac/region/RegionIN865.h b/src/mac/region/RegionIN865.h new file mode 100755 index 0000000..bfc88f5 --- /dev/null +++ b/src/mac/region/RegionIN865.h @@ -0,0 +1,468 @@ +/*! + * \file RegionIN865.h + * + * \brief Region definition for IN865 + * + * \copyright Revised BSD License, see section \ref LICENSE. + * + * \code + * ______ _ + * / _____) _ | | + * ( (____ _____ ____ _| |_ _____ ____| |__ + * \____ \| ___ | (_ _) ___ |/ ___) _ \ + * _____) ) ____| | | || |_| ____( (___| | | | + * (______/|_____)_|_|_| \__)_____)\____)_| |_| + * (C)2013 Semtech + * + * ___ _____ _ ___ _ _____ ___ ___ ___ ___ + * / __|_ _/_\ / __| |/ / __/ _ \| _ \/ __| __| + * \__ \ | |/ _ \ (__| ' <| _| (_) | / (__| _| + * |___/ |_/_/ \_\___|_|\_\_| \___/|_|_\\___|___| + * embedded.connectivity.solutions=============== + * + * \endcode + * + * \author Miguel Luis ( Semtech ) + * + * \author Gregory Cristian ( Semtech ) + * + * \author Daniel Jaeckle ( STACKFORCE ) + * + * \defgroup REGIONIN865 Region IN865 + * Implementation according to LoRaWAN Specification v1.0.2. + * \{ + */ +#ifndef __REGION_IN865_H__ +#define __REGION_IN865_H__ + +/*! + * LoRaMac maximum number of channels + */ +#define IN865_MAX_NB_CHANNELS 16 + +/*! + * Number of default channels + */ +#define IN865_NUMB_DEFAULT_CHANNELS 3 + +/*! + * Number of channels to apply for the CF list + */ +#define IN865_NUMB_CHANNELS_CF_LIST 5 + +/*! + * Minimal datarate that can be used by the node + */ +#define IN865_TX_MIN_DATARATE DR_0 + +/*! + * Maximal datarate that can be used by the node + */ +#define IN865_TX_MAX_DATARATE DR_7 + +/*! + * Minimal datarate that can be used by the node + */ +#define IN865_RX_MIN_DATARATE DR_0 + +/*! + * Maximal datarate that can be used by the node + */ +#define IN865_RX_MAX_DATARATE DR_7 + +/*! + * Default datarate used by the node + */ +#define IN865_DEFAULT_DATARATE DR_0 + +/*! + * Minimal Rx1 receive datarate offset + */ +#define IN865_MIN_RX1_DR_OFFSET 0 + +/*! + * Maximal Rx1 receive datarate offset + */ +#define IN865_MAX_RX1_DR_OFFSET 7 + +/*! + * Default Rx1 receive datarate offset + */ +#define IN865_DEFAULT_RX1_DR_OFFSET 0 + +/*! + * Minimal Tx output power that can be used by the node + */ +#define IN865_MIN_TX_POWER TX_POWER_10 + +/*! + * Maximal Tx output power that can be used by the node + */ +#define IN865_MAX_TX_POWER TX_POWER_0 + +/*! + * Default Tx output power used by the node + */ +#define IN865_DEFAULT_TX_POWER TX_POWER_0 + +/*! + * Default Max EIRP + */ +#define IN865_DEFAULT_MAX_EIRP 30.0f + +/*! + * Default antenna gain + */ +#define IN865_DEFAULT_ANTENNA_GAIN 2.15f + +/*! + * ADR Ack limit + */ +#define IN865_ADR_ACK_LIMIT 64 + +/*! + * ADR Ack delay + */ +#define IN865_ADR_ACK_DELAY 32 + +/*! + * Enabled or disabled the duty cycle + */ +#define IN865_DUTY_CYCLE_ENABLED 1 + +/*! + * Maximum RX window duration + */ +#define IN865_MAX_RX_WINDOW 3000 + +/*! + * Receive delay 1 + */ +#define IN865_RECEIVE_DELAY1 1000 + +/*! + * Receive delay 2 + */ +#define IN865_RECEIVE_DELAY2 2000 + +/*! + * Join accept delay 1 + */ +#define IN865_JOIN_ACCEPT_DELAY1 5000 + +/*! + * Join accept delay 2 + */ +#define IN865_JOIN_ACCEPT_DELAY2 6000 + +/*! + * Maximum frame counter gap + */ +#define IN865_MAX_FCNT_GAP 16384 + +/*! + * Ack timeout + */ +#define IN865_ACKTIMEOUT 2000 + +/*! + * Random ack timeout limits + */ +#define IN865_ACK_TIMEOUT_RND 1000 + +#if ( IN865_DEFAULT_DATARATE > DR_5 ) +#error "A default DR higher than DR_5 may lead to connectivity loss." +#endif + +/*! + * Second reception window channel frequency definition. + */ +#define IN865_RX_WND_2_FREQ 866550000 + +/*! + * Second reception window channel datarate definition. + */ +#define IN865_RX_WND_2_DR DR_2 + +/*! + * Maximum number of bands + */ +#define IN865_MAX_NB_BANDS 1 + +/*! + * Band 0 definition + * { DutyCycle, TxMaxPower, LastTxDoneTime, TimeOff } + */ +#define IN865_BAND0 { 1 , IN865_MAX_TX_POWER, 0, 0 } // 100.0 % + +/*! + * LoRaMac default channel 1 + * Channel = { Frequency [Hz], RX1 Frequency [Hz], { ( ( DrMax << 4 ) | DrMin ) }, Band } + */ +#define IN865_LC1 { 865062500, 0, { ( ( DR_5 << 4 ) | DR_0 ) }, 0 } + +/*! + * LoRaMac default channel 2 + * Channel = { Frequency [Hz], RX1 Frequency [Hz], { ( ( DrMax << 4 ) | DrMin ) }, Band } + */ +#define IN865_LC2 { 865402500, 0, { ( ( DR_5 << 4 ) | DR_0 ) }, 0 } + +/*! + * LoRaMac default channel 3 + * Channel = { Frequency [Hz], RX1 Frequency [Hz], { ( ( DrMax << 4 ) | DrMin ) }, Band } + */ +#define IN865_LC3 { 865985000, 0, { ( ( DR_5 << 4 ) | DR_0 ) }, 0 } + +/*! + * LoRaMac channels which are allowed for the join procedure + */ +#define IN865_JOIN_CHANNELS ( uint16_t )( LC( 1 ) | LC( 2 ) | LC( 3 ) ) + +/*! + * Data rates table definition + */ +static const uint8_t DataratesIN865[] = { 12, 11, 10, 9, 8, 7, 7, 50 }; + +/*! + * Bandwidths table definition in Hz + */ +static const uint32_t BandwidthsIN865[] = { 125000, 125000, 125000, 125000, 125000, 125000, 250000, 0 }; + +/*! + * Maximum payload with respect to the datarate index. Cannot operate with repeater. + */ +static const uint8_t MaxPayloadOfDatarateIN865[] = { 51, 51, 51, 115, 242, 242, 242, 242 }; + +/*! + * Maximum payload with respect to the datarate index. Can operate with repeater. + */ +static const uint8_t MaxPayloadOfDatarateRepeaterIN865[] = { 51, 51, 51, 115, 222, 222, 222, 222 }; + +/*! + * Effective datarate offsets for receive window 1. + */ +static const int8_t EffectiveRx1DrOffsetIN865[] = { 0, 1, 2, 3, 4, 5, -1, -2 }; + +/*! + * \brief The function gets a value of a specific phy attribute. + * + * \param [IN] getPhy Pointer to the function parameters. + * + * \retval Returns a structure containing the PHY parameter. + */ +PhyParam_t RegionIN865GetPhyParam( GetPhyParams_t* getPhy ); + +/*! + * \brief Updates the last TX done parameters of the current channel. + * + * \param [IN] txDone Pointer to the function parameters. + */ +void RegionIN865SetBandTxDone( SetBandTxDoneParams_t* txDone ); + +/*! + * \brief Initializes the channels masks and the channels. + * + * \param [IN] type Sets the initialization type. + */ +void RegionIN865InitDefaults( InitType_t type ); + +/*! + * \brief Verifies a parameter. + * + * \param [IN] verify Pointer to the function parameters. + * + * \param [IN] type Sets the initialization type. + * + * \retval Returns true, if the parameter is valid. + */ +bool RegionIN865Verify( VerifyParams_t* verify, PhyAttribute_t phyAttribute ); + +/*! + * \brief The function parses the input buffer and sets up the channels of the + * CF list. + * + * \param [IN] applyCFList Pointer to the function parameters. + */ +void RegionIN865ApplyCFList( ApplyCFListParams_t* applyCFList ); + +/*! + * \brief Sets a channels mask. + * + * \param [IN] chanMaskSet Pointer to the function parameters. + * + * \retval Returns true, if the channels mask could be set. + */ +bool RegionIN865ChanMaskSet( ChanMaskSetParams_t* chanMaskSet ); + +/*! + * \brief Calculates the next datarate to set, when ADR is on or off. + * + * \param [IN] adrNext Pointer to the function parameters. + * + * \param [OUT] drOut The calculated datarate for the next TX. + * + * \param [OUT] txPowOut The TX power for the next TX. + * + * \param [OUT] adrAckCounter The calculated ADR acknowledgement counter. + * + * \retval Returns true, if an ADR request should be performed. + */ +bool RegionIN865AdrNext( AdrNextParams_t* adrNext, int8_t* drOut, int8_t* txPowOut, uint32_t* adrAckCounter ); + +/*! + * Computes the Rx window timeout and offset. + * + * \param [IN] datarate Rx window datarate index to be used + * + * \param [IN] minRxSymbols Minimum required number of symbols to detect an Rx frame. + * + * \param [IN] rxError System maximum timing error of the receiver. In milliseconds + * The receiver will turn on in a [-rxError : +rxError] ms + * interval around RxOffset + * + * \param [OUT]rxConfigParams Returns updated WindowTimeout and WindowOffset fields. + */ +void RegionIN865ComputeRxWindowParameters( int8_t datarate, uint8_t minRxSymbols, uint32_t rxError, RxConfigParams_t *rxConfigParams ); + +/*! + * \brief Configuration of the RX windows. + * + * \param [IN] rxConfig Pointer to the function parameters. + * + * \param [OUT] datarate The datarate index which was set. + * + * \retval Returns true, if the configuration was applied successfully. + */ +bool RegionIN865RxConfig( RxConfigParams_t* rxConfig, int8_t* datarate ); + +/*! + * \brief TX configuration. + * + * \param [IN] txConfig Pointer to the function parameters. + * + * \param [OUT] txPower The tx power index which was set. + * + * \param [OUT] txTimeOnAir The time-on-air of the frame. + * + * \retval Returns true, if the configuration was applied successfully. + */ +bool RegionIN865TxConfig( TxConfigParams_t* txConfig, int8_t* txPower, TimerTime_t* txTimeOnAir ); + +/*! + * \brief The function processes a Link ADR Request. + * + * \param [IN] linkAdrReq Pointer to the function parameters. + * + * \retval Returns the status of the operation, according to the LoRaMAC specification. + */ +uint8_t RegionIN865LinkAdrReq( LinkAdrReqParams_t* linkAdrReq, int8_t* drOut, int8_t* txPowOut, uint8_t* nbRepOut, uint8_t* nbBytesParsed ); + +/*! + * \brief The function processes a RX Parameter Setup Request. + * + * \param [IN] rxParamSetupReq Pointer to the function parameters. + * + * \retval Returns the status of the operation, according to the LoRaMAC specification. + */ +uint8_t RegionIN865RxParamSetupReq( RxParamSetupReqParams_t* rxParamSetupReq ); + +/*! + * \brief The function processes a Channel Request. + * + * \param [IN] newChannelReq Pointer to the function parameters. + * + * \retval Returns the status of the operation, according to the LoRaMAC specification. + */ +uint8_t RegionIN865NewChannelReq( NewChannelReqParams_t* newChannelReq ); + +/*! + * \brief The function processes a TX ParamSetup Request. + * + * \param [IN] txParamSetupReq Pointer to the function parameters. + * + * \retval Returns the status of the operation, according to the LoRaMAC specification. + * Returns -1, if the functionality is not implemented. In this case, the end node + * shall not process the command. + */ +int8_t RegionIN865TxParamSetupReq( TxParamSetupReqParams_t* txParamSetupReq ); + +/*! + * \brief The function processes a DlChannel Request. + * + * \param [IN] dlChannelReq Pointer to the function parameters. + * + * \retval Returns the status of the operation, according to the LoRaMAC specification. + */ +uint8_t RegionIN865DlChannelReq( DlChannelReqParams_t* dlChannelReq ); + +/*! + * \brief Alternates the datarate of the channel for the join request. + * + * \param [IN] alternateDr Pointer to the function parameters. + * + * \retval Datarate to apply. + */ +int8_t RegionIN865AlternateDr( AlternateDrParams_t* alternateDr ); + +/*! + * \brief Calculates the back-off time. + * + * \param [IN] calcBackOff Pointer to the function parameters. + */ +void RegionIN865CalcBackOff( CalcBackOffParams_t* calcBackOff ); + +/*! + * \brief Searches and set the next random available channel + * + * \param [OUT] channel Next channel to use for TX. + * + * \param [OUT] time Time to wait for the next transmission according to the duty + * cycle. + * + * \param [OUT] aggregatedTimeOff Updates the aggregated time off. + * + * \retval Function status [1: OK, 0: Unable to find a channel on the current datarate] + */ +bool RegionIN865NextChannel( NextChanParams_t* nextChanParams, uint8_t* channel, TimerTime_t* time, TimerTime_t* aggregatedTimeOff ); + +/*! + * \brief Adds a channel. + * + * \param [IN] channelAdd Pointer to the function parameters. + * + * \retval Status of the operation. + */ +LoRaMacStatus_t RegionIN865ChannelAdd( ChannelAddParams_t* channelAdd ); + +/*! + * \brief Removes a channel. + * + * \param [IN] channelRemove Pointer to the function parameters. + * + * \retval Returns true, if the channel was removed successfully. + */ +bool RegionIN865ChannelsRemove( ChannelRemoveParams_t* channelRemove ); + +/*! + * \brief Sets the radio into continuous wave mode. + * + * \param [IN] continuousWave Pointer to the function parameters. + */ +void RegionIN865SetContinuousWave( ContinuousWaveParams_t* continuousWave ); + +/*! + * \brief Computes new datarate according to the given offset + * + * \param [IN] downlinkDwellTime Downlink dwell time configuration. 0: No limit, 1: 400ms + * + * \param [IN] dr Current datarate + * + * \param [IN] drOffset Offset to be applied + * + * \retval newDr Computed datarate. + */ +uint8_t RegionIN865ApplyDrOffset( uint8_t downlinkDwellTime, int8_t dr, int8_t drOffset ); + +/*! \} defgroup REGIONIN865 */ + +#endif // __REGION_IN865_H__ diff --git a/src/mac/region/RegionKR920.c b/src/mac/region/RegionKR920.c new file mode 100755 index 0000000..eda6652 --- /dev/null +++ b/src/mac/region/RegionKR920.c @@ -0,0 +1,1046 @@ +/* + / _____) _ | | +( (____ _____ ____ _| |_ _____ ____| |__ + \____ \| ___ | (_ _) ___ |/ ___) _ \ + _____) ) ____| | | || |_| ____( (___| | | | +(______/|_____)_|_|_| \__)_____)\____)_| |_| + (C)2013 Semtech + ___ _____ _ ___ _ _____ ___ ___ ___ ___ +/ __|_ _/_\ / __| |/ / __/ _ \| _ \/ __| __| +\__ \ | |/ _ \ (__| ' <| _| (_) | / (__| _| +|___/ |_/_/ \_\___|_|\_\_| \___/|_|_\\___|___| +embedded.connectivity.solutions=============== + +Description: LoRa MAC region KR920 implementation + +License: Revised BSD License, see LICENSE.TXT file include in the project + +Maintainer: Miguel Luis ( Semtech ), Gregory Cristian ( Semtech ) and Daniel Jaeckle ( STACKFORCE ) +*/ +#include +#include +#include +#include + +#include "board.h" +#include "LoRaMac.h" + +#include "utilities.h" + +#include "Region.h" +#include "RegionCommon.h" +#include "RegionKR920.h" + +// Definitions +#define CHANNELS_MASK_SIZE 1 + +// Global attributes +/*! + * LoRaMAC channels + */ +static ChannelParams_t Channels[KR920_MAX_NB_CHANNELS]; + +/*! + * LoRaMac bands + */ +static Band_t Bands[KR920_MAX_NB_BANDS] = +{ + KR920_BAND0 +}; + +/*! + * LoRaMac channels mask + */ +static uint16_t ChannelsMask[CHANNELS_MASK_SIZE]; + +/*! + * LoRaMac channels default mask + */ +static uint16_t ChannelsDefaultMask[CHANNELS_MASK_SIZE]; + +// Static functions +static int8_t GetNextLowerTxDr( int8_t dr, int8_t minDr ) +{ + uint8_t nextLowerDr = 0; + + if( dr == minDr ) + { + nextLowerDr = minDr; + } + else + { + nextLowerDr = dr - 1; + } + return nextLowerDr; +} + +static int8_t GetMaxEIRP( uint32_t freq ) +{ + if( freq >= 922100000 ) + {// Limit to 14dBm + return KR920_DEFAULT_MAX_EIRP_HIGH; + } + // Limit to 10dBm + return KR920_DEFAULT_MAX_EIRP_LOW; +} + +static uint32_t GetBandwidth( uint32_t drIndex ) +{ + switch( BandwidthsKR920[drIndex] ) + { + default: + case 125000: + return 0; + case 250000: + return 1; + case 500000: + return 2; + } +} + +static int8_t LimitTxPower( int8_t txPower, int8_t maxBandTxPower, int8_t datarate, uint16_t* channelsMask ) +{ + int8_t txPowerResult = txPower; + + // Limit tx power to the band max + txPowerResult = MAX( txPower, maxBandTxPower ); + + return txPowerResult; +} + +static bool VerifyTxFreq( uint32_t freq ) +{ + uint32_t tmpFreq = freq; + + // Check radio driver support + if( Radio.CheckRfFrequency( tmpFreq ) == false ) + { + return false; + } + + // Verify if the frequency is valid. The frequency must be in a specified + // range and can be set to specific values. + if( ( tmpFreq >= 920900000 ) && ( tmpFreq <=923300000 ) ) + { + // Range ok, check for specific value + tmpFreq -= 920900000; + if( ( tmpFreq % 200000 ) == 0 ) + { + return true; + } + } + return false; +} + +static uint8_t CountNbOfEnabledChannels( bool joined, uint8_t datarate, uint16_t* channelsMask, ChannelParams_t* channels, Band_t* bands, uint8_t* enabledChannels, uint8_t* delayTx ) +{ + uint8_t nbEnabledChannels = 0; + uint8_t delayTransmission = 0; + + for( uint8_t i = 0, k = 0; i < KR920_MAX_NB_CHANNELS; i += 16, k++ ) + { + for( uint8_t j = 0; j < 16; j++ ) + { + if( ( channelsMask[k] & ( 1 << j ) ) != 0 ) + { + if( channels[i + j].Frequency == 0 ) + { // Check if the channel is enabled + continue; + } + if( joined == false ) + { + if( ( KR920_JOIN_CHANNELS & ( 1 << j ) ) == 0 ) + { + continue; + } + } + if( RegionCommonValueInRange( datarate, channels[i + j].DrRange.Fields.Min, + channels[i + j].DrRange.Fields.Max ) == false ) + { // Check if the current channel selection supports the given datarate + continue; + } + if( bands[channels[i + j].Band].TimeOff > 0 ) + { // Check if the band is available for transmission + delayTransmission++; + continue; + } + enabledChannels[nbEnabledChannels++] = i + j; + } + } + } + + *delayTx = delayTransmission; + return nbEnabledChannels; +} + +PhyParam_t RegionKR920GetPhyParam( GetPhyParams_t* getPhy ) +{ + PhyParam_t phyParam = { 0 }; + + switch( getPhy->Attribute ) + { + case PHY_MIN_RX_DR: + { + phyParam.Value = KR920_RX_MIN_DATARATE; + break; + } + case PHY_MIN_TX_DR: + { + phyParam.Value = KR920_TX_MIN_DATARATE; + break; + } + case PHY_DEF_TX_DR: + { + phyParam.Value = KR920_DEFAULT_DATARATE; + break; + } + case PHY_NEXT_LOWER_TX_DR: + { + phyParam.Value = GetNextLowerTxDr( getPhy->Datarate, KR920_TX_MIN_DATARATE ); + break; + } + case PHY_DEF_TX_POWER: + { + phyParam.Value = KR920_DEFAULT_TX_POWER; + break; + } + case PHY_MAX_PAYLOAD: + { + phyParam.Value = MaxPayloadOfDatarateKR920[getPhy->Datarate]; + break; + } + case PHY_MAX_PAYLOAD_REPEATER: + { + phyParam.Value = MaxPayloadOfDatarateRepeaterKR920[getPhy->Datarate]; + break; + } + case PHY_DUTY_CYCLE: + { + phyParam.Value = KR920_DUTY_CYCLE_ENABLED; + break; + } + case PHY_MAX_RX_WINDOW: + { + phyParam.Value = KR920_MAX_RX_WINDOW; + break; + } + case PHY_RECEIVE_DELAY1: + { + phyParam.Value = KR920_RECEIVE_DELAY1; + break; + } + case PHY_RECEIVE_DELAY2: + { + phyParam.Value = KR920_RECEIVE_DELAY2; + break; + } + case PHY_JOIN_ACCEPT_DELAY1: + { + phyParam.Value = KR920_JOIN_ACCEPT_DELAY1; + break; + } + case PHY_JOIN_ACCEPT_DELAY2: + { + phyParam.Value = KR920_JOIN_ACCEPT_DELAY2; + break; + } + case PHY_MAX_FCNT_GAP: + { + phyParam.Value = KR920_MAX_FCNT_GAP; + break; + } + case PHY_ACK_TIMEOUT: + { + phyParam.Value = ( KR920_ACKTIMEOUT + randr( -KR920_ACK_TIMEOUT_RND, KR920_ACK_TIMEOUT_RND ) ); + break; + } + case PHY_DEF_DR1_OFFSET: + { + phyParam.Value = KR920_DEFAULT_RX1_DR_OFFSET; + break; + } + case PHY_DEF_RX2_FREQUENCY: + { + phyParam.Value = KR920_RX_WND_2_FREQ; + break; + } + case PHY_DEF_RX2_DR: + { + phyParam.Value = KR920_RX_WND_2_DR; + break; + } + case PHY_CHANNELS_MASK: + { + phyParam.ChannelsMask = ChannelsMask; + break; + } + case PHY_CHANNELS_DEFAULT_MASK: + { + phyParam.ChannelsMask = ChannelsDefaultMask; + break; + } + case PHY_MAX_NB_CHANNELS: + { + phyParam.Value = KR920_MAX_NB_CHANNELS; + break; + } + case PHY_CHANNELS: + { + phyParam.Channels = Channels; + break; + } + case PHY_DEF_UPLINK_DWELL_TIME: + case PHY_DEF_DOWNLINK_DWELL_TIME: + { + phyParam.Value = 0; + break; + } + case PHY_DEF_MAX_EIRP: + { + // We set the higher maximum EIRP as default value. + // The reason for this is, that the frequency may + // change during a channel selection for the next uplink. + // The value has to be recalculated in the TX configuration. + phyParam.fValue = KR920_DEFAULT_MAX_EIRP_HIGH; + break; + } + case PHY_DEF_ANTENNA_GAIN: + { + phyParam.fValue = KR920_DEFAULT_ANTENNA_GAIN; + break; + } + case PHY_NB_JOIN_TRIALS: + case PHY_DEF_NB_JOIN_TRIALS: + { + phyParam.Value = 48; + break; + } + default: + { + break; + } + } + + return phyParam; +} + +void RegionKR920SetBandTxDone( SetBandTxDoneParams_t* txDone ) +{ + RegionCommonSetBandTxDone( txDone->Joined, &Bands[Channels[txDone->Channel].Band], txDone->LastTxDoneTime ); +} + +void RegionKR920InitDefaults( InitType_t type ) +{ + switch( type ) + { + case INIT_TYPE_INIT: + { + // Channels + Channels[0] = ( ChannelParams_t ) KR920_LC1; + Channels[1] = ( ChannelParams_t ) KR920_LC2; + Channels[2] = ( ChannelParams_t ) KR920_LC3; + + // Initialize the channels default mask + ChannelsDefaultMask[0] = LC( 1 ) + LC( 2 ) + LC( 3 ); + // Update the channels mask + RegionCommonChanMaskCopy( ChannelsMask, ChannelsDefaultMask, 1 ); + break; + } + case INIT_TYPE_RESTORE: + { + // Restore channels default mask + ChannelsMask[0] |= ChannelsDefaultMask[0]; + break; + } + default: + { + break; + } + } +} + +bool RegionKR920Verify( VerifyParams_t* verify, PhyAttribute_t phyAttribute ) +{ + switch( phyAttribute ) + { + case PHY_TX_DR: + { + return RegionCommonValueInRange( verify->DatarateParams.Datarate, KR920_TX_MIN_DATARATE, KR920_TX_MAX_DATARATE ); + } + case PHY_DEF_TX_DR: + { + return RegionCommonValueInRange( verify->DatarateParams.Datarate, DR_0, DR_5 ); + } + case PHY_RX_DR: + { + return RegionCommonValueInRange( verify->DatarateParams.Datarate, KR920_RX_MIN_DATARATE, KR920_RX_MAX_DATARATE ); + } + case PHY_DEF_TX_POWER: + case PHY_TX_POWER: + { + // Remark: switched min and max! + return RegionCommonValueInRange( verify->TxPower, KR920_MAX_TX_POWER, KR920_MIN_TX_POWER ); + } + case PHY_DUTY_CYCLE: + { + return KR920_DUTY_CYCLE_ENABLED; + } + case PHY_NB_JOIN_TRIALS: + { + if( verify->NbJoinTrials < 48 ) + { + return false; + } + break; + } + default: + return false; + } + return true; +} + +void RegionKR920ApplyCFList( ApplyCFListParams_t* applyCFList ) +{ + ChannelParams_t newChannel; + ChannelAddParams_t channelAdd; + ChannelRemoveParams_t channelRemove; + + // Setup default datarate range + newChannel.DrRange.Value = ( DR_5 << 4 ) | DR_0; + + // Size of the optional CF list + if( applyCFList->Size != 16 ) + { + return; + } + + // Last byte is RFU, don't take it into account + for( uint8_t i = 0, chanIdx = KR920_NUMB_DEFAULT_CHANNELS; chanIdx < KR920_MAX_NB_CHANNELS; i+=3, chanIdx++ ) + { + if( chanIdx < ( KR920_NUMB_CHANNELS_CF_LIST + KR920_NUMB_DEFAULT_CHANNELS ) ) + { + // Channel frequency + newChannel.Frequency = (uint32_t) applyCFList->Payload[i]; + newChannel.Frequency |= ( (uint32_t) applyCFList->Payload[i + 1] << 8 ); + newChannel.Frequency |= ( (uint32_t) applyCFList->Payload[i + 2] << 16 ); + newChannel.Frequency *= 100; + + // Initialize alternative frequency to 0 + newChannel.Rx1Frequency = 0; + } + else + { + newChannel.Frequency = 0; + newChannel.DrRange.Value = 0; + newChannel.Rx1Frequency = 0; + } + + if( newChannel.Frequency != 0 ) + { + channelAdd.NewChannel = &newChannel; + channelAdd.ChannelId = chanIdx; + + // Try to add all channels + RegionKR920ChannelAdd( &channelAdd ); + } + else + { + channelRemove.ChannelId = chanIdx; + + RegionKR920ChannelsRemove( &channelRemove ); + } + } +} + +bool RegionKR920ChanMaskSet( ChanMaskSetParams_t* chanMaskSet ) +{ + switch( chanMaskSet->ChannelsMaskType ) + { + case CHANNELS_MASK: + { + RegionCommonChanMaskCopy( ChannelsMask, chanMaskSet->ChannelsMaskIn, 1 ); + break; + } + case CHANNELS_DEFAULT_MASK: + { + RegionCommonChanMaskCopy( ChannelsDefaultMask, chanMaskSet->ChannelsMaskIn, 1 ); + break; + } + default: + return false; + } + return true; +} + +bool RegionKR920AdrNext( AdrNextParams_t* adrNext, int8_t* drOut, int8_t* txPowOut, uint32_t* adrAckCounter ) +{ + bool adrAckReq = false; + int8_t datarate = adrNext->Datarate; + int8_t txPower = adrNext->TxPower; + GetPhyParams_t getPhy; + PhyParam_t phyParam; + + // Report back the adr ack counter + *adrAckCounter = adrNext->AdrAckCounter; + + if( adrNext->AdrEnabled == true ) + { + if( datarate == KR920_TX_MIN_DATARATE ) + { + *adrAckCounter = 0; + adrAckReq = false; + } + else + { + if( adrNext->AdrAckCounter >= KR920_ADR_ACK_LIMIT ) + { + adrAckReq = true; + txPower = KR920_MAX_TX_POWER; + } + else + { + adrAckReq = false; + } + if( adrNext->AdrAckCounter >= ( KR920_ADR_ACK_LIMIT + KR920_ADR_ACK_DELAY ) ) + { + if( ( adrNext->AdrAckCounter % KR920_ADR_ACK_DELAY ) == 1 ) + { + // Decrease the datarate + getPhy.Attribute = PHY_NEXT_LOWER_TX_DR; + getPhy.Datarate = datarate; + getPhy.UplinkDwellTime = adrNext->UplinkDwellTime; + phyParam = RegionKR920GetPhyParam( &getPhy ); + datarate = phyParam.Value; + + if( datarate == KR920_TX_MIN_DATARATE ) + { + // We must set adrAckReq to false as soon as we reach the lowest datarate + adrAckReq = false; + if( adrNext->UpdateChanMask == true ) + { + // Re-enable default channels + ChannelsMask[0] |= LC( 1 ) + LC( 2 ) + LC( 3 ); + } + } + } + } + } + } + + *drOut = datarate; + *txPowOut = txPower; + return adrAckReq; +} + +void RegionKR920ComputeRxWindowParameters( int8_t datarate, uint8_t minRxSymbols, uint32_t rxError, RxConfigParams_t *rxConfigParams ) +{ + double tSymbol = 0.0; + + // Get the datarate, perform a boundary check + rxConfigParams->Datarate = MIN( datarate, KR920_RX_MAX_DATARATE ); + rxConfigParams->Bandwidth = GetBandwidth( rxConfigParams->Datarate ); + + tSymbol = RegionCommonComputeSymbolTimeLoRa( DataratesKR920[rxConfigParams->Datarate], BandwidthsKR920[rxConfigParams->Datarate] ); + + RegionCommonComputeRxWindowParameters( tSymbol, minRxSymbols, rxError, RADIO_WAKEUP_TIME, &rxConfigParams->WindowTimeout, &rxConfigParams->WindowOffset ); +} + +bool RegionKR920RxConfig( RxConfigParams_t* rxConfig, int8_t* datarate ) +{ + int8_t dr = rxConfig->Datarate; + uint8_t maxPayload = 0; + int8_t phyDr = 0; + uint32_t frequency = rxConfig->Frequency; + + if( Radio.GetStatus( ) != RF_IDLE ) + { + return false; + } + + if( rxConfig->Window == 0 ) + { + // Apply window 1 frequency + frequency = Channels[rxConfig->Channel].Frequency; + // Apply the alternative RX 1 window frequency, if it is available + if( Channels[rxConfig->Channel].Rx1Frequency != 0 ) + { + frequency = Channels[rxConfig->Channel].Rx1Frequency; + } + } + + // Read the physical datarate from the datarates table + phyDr = DataratesKR920[dr]; + + Radio.SetChannel( frequency ); + + // Radio configuration + Radio.SetRxConfig( MODEM_LORA, rxConfig->Bandwidth, phyDr, 1, 0, 8, rxConfig->WindowTimeout, false, 0, false, 0, 0, true, rxConfig->RxContinuous ); + maxPayload = MaxPayloadOfDatarateKR920[dr]; + Radio.SetMaxPayloadLength( MODEM_LORA, maxPayload + LORA_MAC_FRMPAYLOAD_OVERHEAD ); + + *datarate = (uint8_t) dr; + return true; +} + +bool RegionKR920TxConfig( TxConfigParams_t* txConfig, int8_t* txPower, TimerTime_t* txTimeOnAir ) +{ + int8_t phyDr = DataratesKR920[txConfig->Datarate]; + int8_t txPowerLimited = LimitTxPower( txConfig->TxPower, Bands[Channels[txConfig->Channel].Band].TxMaxPower, txConfig->Datarate, ChannelsMask ); + uint32_t bandwidth = GetBandwidth( txConfig->Datarate ); + float maxEIRP = GetMaxEIRP( Channels[txConfig->Channel].Frequency ); + int8_t phyTxPower = 0; + + // Take the minimum between the maxEIRP and txConfig->MaxEirp. + // The value of txConfig->MaxEirp could have changed during runtime, e.g. due to a MAC command. + maxEIRP = MIN( txConfig->MaxEirp, maxEIRP ); + + // Calculate physical TX power + phyTxPower = RegionCommonComputeTxPower( txPowerLimited, maxEIRP, txConfig->AntennaGain ); + + // Setup the radio frequency + Radio.SetChannel( Channels[txConfig->Channel].Frequency ); + + Radio.SetTxConfig( MODEM_LORA, phyTxPower, 0, bandwidth, phyDr, 1, 8, false, true, 0, 0, false, 3000 ); + + // Setup maximum payload lenght of the radio driver + Radio.SetMaxPayloadLength( MODEM_LORA, txConfig->PktLen ); + // Get the time-on-air of the next tx frame + *txTimeOnAir = Radio.TimeOnAir( MODEM_LORA, txConfig->PktLen ); + + *txPower = txPowerLimited; + return true; +} + +uint8_t RegionKR920LinkAdrReq( LinkAdrReqParams_t* linkAdrReq, int8_t* drOut, int8_t* txPowOut, uint8_t* nbRepOut, uint8_t* nbBytesParsed ) +{ + uint8_t status = 0x07; + RegionCommonLinkAdrParams_t linkAdrParams; + uint8_t nextIndex = 0; + uint8_t bytesProcessed = 0; + uint16_t chMask = 0; + GetPhyParams_t getPhy; + PhyParam_t phyParam; + RegionCommonLinkAdrReqVerifyParams_t linkAdrVerifyParams; + + while( bytesProcessed < linkAdrReq->PayloadSize ) + { + // Get ADR request parameters + nextIndex = RegionCommonParseLinkAdrReq( &( linkAdrReq->Payload[bytesProcessed] ), &linkAdrParams ); + + if( nextIndex == 0 ) + break; // break loop, since no more request has been found + + // Update bytes processed + bytesProcessed += nextIndex; + + // Revert status, as we only check the last ADR request for the channel mask KO + status = 0x07; + + // Setup temporary channels mask + chMask = linkAdrParams.ChMask; + + // Verify channels mask + if( ( linkAdrParams.ChMaskCtrl == 0 ) && ( chMask == 0 ) ) + { + status &= 0xFE; // Channel mask KO + } + else if( ( ( linkAdrParams.ChMaskCtrl >= 1 ) && ( linkAdrParams.ChMaskCtrl <= 5 )) || + ( linkAdrParams.ChMaskCtrl >= 7 ) ) + { + // RFU + status &= 0xFE; // Channel mask KO + } + else + { + for( uint8_t i = 0; i < KR920_MAX_NB_CHANNELS; i++ ) + { + if( linkAdrParams.ChMaskCtrl == 6 ) + { + if( Channels[i].Frequency != 0 ) + { + chMask |= 1 << i; + } + } + else + { + if( ( ( chMask & ( 1 << i ) ) != 0 ) && + ( Channels[i].Frequency == 0 ) ) + {// Trying to enable an undefined channel + status &= 0xFE; // Channel mask KO + } + } + } + } + } + + // Get the minimum possible datarate + getPhy.Attribute = PHY_MIN_TX_DR; + getPhy.UplinkDwellTime = linkAdrReq->UplinkDwellTime; + phyParam = RegionKR920GetPhyParam( &getPhy ); + + linkAdrVerifyParams.Status = status; + linkAdrVerifyParams.AdrEnabled = linkAdrReq->AdrEnabled; + linkAdrVerifyParams.Datarate = linkAdrParams.Datarate; + linkAdrVerifyParams.TxPower = linkAdrParams.TxPower; + linkAdrVerifyParams.NbRep = linkAdrParams.NbRep; + linkAdrVerifyParams.CurrentDatarate = linkAdrReq->CurrentDatarate; + linkAdrVerifyParams.CurrentTxPower = linkAdrReq->CurrentTxPower; + linkAdrVerifyParams.CurrentNbRep = linkAdrReq->CurrentNbRep; + linkAdrVerifyParams.NbChannels = KR920_MAX_NB_CHANNELS; + linkAdrVerifyParams.ChannelsMask = &chMask; + linkAdrVerifyParams.MinDatarate = ( int8_t )phyParam.Value; + linkAdrVerifyParams.MaxDatarate = KR920_TX_MAX_DATARATE; + linkAdrVerifyParams.Channels = Channels; + linkAdrVerifyParams.MinTxPower = KR920_MIN_TX_POWER; + linkAdrVerifyParams.MaxTxPower = KR920_MAX_TX_POWER; + + // Verify the parameters and update, if necessary + status = RegionCommonLinkAdrReqVerifyParams( &linkAdrVerifyParams, &linkAdrParams.Datarate, &linkAdrParams.TxPower, &linkAdrParams.NbRep ); + + // Update channelsMask if everything is correct + if( status == 0x07 ) + { + // Set the channels mask to a default value + memset( ChannelsMask, 0, sizeof( ChannelsMask ) ); + // Update the channels mask + ChannelsMask[0] = chMask; + } + + // Update status variables + *drOut = linkAdrParams.Datarate; + *txPowOut = linkAdrParams.TxPower; + *nbRepOut = linkAdrParams.NbRep; + *nbBytesParsed = bytesProcessed; + + return status; +} + +uint8_t RegionKR920RxParamSetupReq( RxParamSetupReqParams_t* rxParamSetupReq ) +{ + uint8_t status = 0x07; + + // Verify radio frequency + if( Radio.CheckRfFrequency( rxParamSetupReq->Frequency ) == false ) + { + status &= 0xFE; // Channel frequency KO + } + + // Verify datarate + if( RegionCommonValueInRange( rxParamSetupReq->Datarate, KR920_RX_MIN_DATARATE, KR920_RX_MAX_DATARATE ) == false ) + { + status &= 0xFD; // Datarate KO + } + + // Verify datarate offset + if( RegionCommonValueInRange( rxParamSetupReq->DrOffset, KR920_MIN_RX1_DR_OFFSET, KR920_MAX_RX1_DR_OFFSET ) == false ) + { + status &= 0xFB; // Rx1DrOffset range KO + } + + return status; +} + +uint8_t RegionKR920NewChannelReq( NewChannelReqParams_t* newChannelReq ) +{ + uint8_t status = 0x03; + ChannelAddParams_t channelAdd; + ChannelRemoveParams_t channelRemove; + + if( newChannelReq->NewChannel->Frequency == 0 ) + { + channelRemove.ChannelId = newChannelReq->ChannelId; + + // Remove + if( RegionKR920ChannelsRemove( &channelRemove ) == false ) + { + status &= 0xFC; + } + } + else + { + channelAdd.NewChannel = newChannelReq->NewChannel; + channelAdd.ChannelId = newChannelReq->ChannelId; + + switch( RegionKR920ChannelAdd( &channelAdd ) ) + { + case LORAMAC_STATUS_OK: + { + break; + } + case LORAMAC_STATUS_FREQUENCY_INVALID: + { + status &= 0xFE; + break; + } + case LORAMAC_STATUS_DATARATE_INVALID: + { + status &= 0xFD; + break; + } + case LORAMAC_STATUS_FREQ_AND_DR_INVALID: + { + status &= 0xFC; + break; + } + default: + { + status &= 0xFC; + break; + } + } + } + + return status; +} + +int8_t RegionKR920TxParamSetupReq( TxParamSetupReqParams_t* txParamSetupReq ) +{ + return -1; +} + +uint8_t RegionKR920DlChannelReq( DlChannelReqParams_t* dlChannelReq ) +{ + uint8_t status = 0x03; + + // Verify if the frequency is supported + if( VerifyTxFreq( dlChannelReq->Rx1Frequency ) == false ) + { + status &= 0xFE; + } + + // Verify if an uplink frequency exists + if( Channels[dlChannelReq->ChannelId].Frequency == 0 ) + { + status &= 0xFD; + } + + // Apply Rx1 frequency, if the status is OK + if( status == 0x03 ) + { + Channels[dlChannelReq->ChannelId].Rx1Frequency = dlChannelReq->Rx1Frequency; + } + + return status; +} + +int8_t RegionKR920AlternateDr( AlternateDrParams_t* alternateDr ) +{ + int8_t datarate = 0; + + if( ( alternateDr->NbTrials % 48 ) == 0 ) + { + datarate = DR_0; + } + else if( ( alternateDr->NbTrials % 32 ) == 0 ) + { + datarate = DR_1; + } + else if( ( alternateDr->NbTrials % 24 ) == 0 ) + { + datarate = DR_2; + } + else if( ( alternateDr->NbTrials % 16 ) == 0 ) + { + datarate = DR_3; + } + else if( ( alternateDr->NbTrials % 8 ) == 0 ) + { + datarate = DR_4; + } + else + { + datarate = DR_5; + } + return datarate; +} + +void RegionKR920CalcBackOff( CalcBackOffParams_t* calcBackOff ) +{ + RegionCommonCalcBackOffParams_t calcBackOffParams; + + calcBackOffParams.Channels = Channels; + calcBackOffParams.Bands = Bands; + calcBackOffParams.LastTxIsJoinRequest = calcBackOff->LastTxIsJoinRequest; + calcBackOffParams.Joined = calcBackOff->Joined; + calcBackOffParams.DutyCycleEnabled = calcBackOff->DutyCycleEnabled; + calcBackOffParams.Channel = calcBackOff->Channel; + calcBackOffParams.ElapsedTime = calcBackOff->ElapsedTime; + calcBackOffParams.TxTimeOnAir = calcBackOff->TxTimeOnAir; + + RegionCommonCalcBackOff( &calcBackOffParams ); +} + +bool RegionKR920NextChannel( NextChanParams_t* nextChanParams, uint8_t* channel, TimerTime_t* time, TimerTime_t* aggregatedTimeOff ) +{ + uint8_t channelNext = 0; + uint8_t nbEnabledChannels = 0; + uint8_t delayTx = 0; + uint8_t enabledChannels[KR920_MAX_NB_CHANNELS] = { 0 }; + TimerTime_t nextTxDelay = 0; + + if( RegionCommonCountChannels( ChannelsMask, 0, 1 ) == 0 ) + { // Reactivate default channels + ChannelsMask[0] |= LC( 1 ) + LC( 2 ) + LC( 3 ); + } + + if( nextChanParams->AggrTimeOff <= TimerGetElapsedTime( nextChanParams->LastAggrTx ) ) + { + // Reset Aggregated time off + *aggregatedTimeOff = 0; + + // Update bands Time OFF + nextTxDelay = RegionCommonUpdateBandTimeOff( nextChanParams->Joined, nextChanParams->DutyCycleEnabled, Bands, KR920_MAX_NB_BANDS ); + + // Search how many channels are enabled + nbEnabledChannels = CountNbOfEnabledChannels( nextChanParams->Joined, nextChanParams->Datarate, + ChannelsMask, Channels, + Bands, enabledChannels, &delayTx ); + } + else + { + delayTx++; + nextTxDelay = nextChanParams->AggrTimeOff - TimerGetElapsedTime( nextChanParams->LastAggrTx ); + } + + if( nbEnabledChannels > 0 ) + { + for( uint8_t i = 0, j = randr( 0, nbEnabledChannels - 1 ); i < KR920_MAX_NB_CHANNELS; i++ ) + { + channelNext = enabledChannels[j]; + j = ( j + 1 ) % nbEnabledChannels; + + // Perform carrier sense for KR920_CARRIER_SENSE_TIME + // If the channel is free, we can stop the LBT mechanism + if( Radio.IsChannelFree( MODEM_LORA, Channels[channelNext].Frequency, KR920_RSSI_FREE_TH, KR920_CARRIER_SENSE_TIME ) == true ) + { + // Free channel found + *channel = channelNext; + *time = 0; + return true; + } + } + return false; + } + else + { + if( delayTx > 0 ) + { + // Delay transmission due to AggregatedTimeOff or to a band time off + *time = nextTxDelay; + return true; + } + // Datarate not supported by any channel, restore defaults + ChannelsMask[0] |= LC( 1 ) + LC( 2 ) + LC( 3 ); + *time = 0; + return false; + } +} + +LoRaMacStatus_t RegionKR920ChannelAdd( ChannelAddParams_t* channelAdd ) +{ + uint8_t band = 0; + bool drInvalid = false; + bool freqInvalid = false; + uint8_t id = channelAdd->ChannelId; + + if( id >= KR920_MAX_NB_CHANNELS ) + { + return LORAMAC_STATUS_PARAMETER_INVALID; + } + + // Validate the datarate range + if( RegionCommonValueInRange( channelAdd->NewChannel->DrRange.Fields.Min, KR920_TX_MIN_DATARATE, KR920_TX_MAX_DATARATE ) == false ) + { + drInvalid = true; + } + if( RegionCommonValueInRange( channelAdd->NewChannel->DrRange.Fields.Max, KR920_TX_MIN_DATARATE, KR920_TX_MAX_DATARATE ) == false ) + { + drInvalid = true; + } + if( channelAdd->NewChannel->DrRange.Fields.Min > channelAdd->NewChannel->DrRange.Fields.Max ) + { + drInvalid = true; + } + + // Default channels don't accept all values + if( id < KR920_NUMB_DEFAULT_CHANNELS ) + { + // All datarates are supported + // We are not allowed to change the frequency + if( channelAdd->NewChannel->Frequency != Channels[id].Frequency ) + { + freqInvalid = true; + } + } + + // Check frequency + if( freqInvalid == false ) + { + if( VerifyTxFreq( channelAdd->NewChannel->Frequency ) == false ) + { + freqInvalid = true; + } + } + + // Check status + if( ( drInvalid == true ) && ( freqInvalid == true ) ) + { + return LORAMAC_STATUS_FREQ_AND_DR_INVALID; + } + if( drInvalid == true ) + { + return LORAMAC_STATUS_DATARATE_INVALID; + } + if( freqInvalid == true ) + { + return LORAMAC_STATUS_FREQUENCY_INVALID; + } + + memcpy( &(Channels[id]), channelAdd->NewChannel, sizeof( Channels[id] ) ); + Channels[id].Band = band; + ChannelsMask[0] |= ( 1 << id ); + return LORAMAC_STATUS_OK; +} + +bool RegionKR920ChannelsRemove( ChannelRemoveParams_t* channelRemove ) +{ + uint8_t id = channelRemove->ChannelId; + + if( id < KR920_NUMB_DEFAULT_CHANNELS ) + { + return false; + } + + // Remove the channel from the list of channels + Channels[id] = ( ChannelParams_t ){ 0, 0, { 0 }, 0 }; + + return RegionCommonChanDisable( ChannelsMask, id, KR920_MAX_NB_CHANNELS ); +} + +void RegionKR920SetContinuousWave( ContinuousWaveParams_t* continuousWave ) +{ + int8_t txPowerLimited = LimitTxPower( continuousWave->TxPower, Bands[Channels[continuousWave->Channel].Band].TxMaxPower, continuousWave->Datarate, ChannelsMask ); + float maxEIRP = GetMaxEIRP( Channels[continuousWave->Channel].Frequency ); + int8_t phyTxPower = 0; + uint32_t frequency = Channels[continuousWave->Channel].Frequency; + + // Take the minimum between the maxEIRP and continuousWave->MaxEirp. + // The value of continuousWave->MaxEirp could have changed during runtime, e.g. due to a MAC command. + maxEIRP = MIN( continuousWave->MaxEirp, maxEIRP ); + + // Calculate physical TX power + phyTxPower = RegionCommonComputeTxPower( txPowerLimited, maxEIRP, continuousWave->AntennaGain ); + + Radio.SetTxContinuousWave( frequency, phyTxPower, continuousWave->Timeout ); +} + +uint8_t RegionKR920ApplyDrOffset( uint8_t downlinkDwellTime, int8_t dr, int8_t drOffset ) +{ + int8_t datarate = dr - drOffset; + + if( datarate < 0 ) + { + datarate = DR_0; + } + return datarate; +} diff --git a/src/mac/region/RegionKR920.h b/src/mac/region/RegionKR920.h new file mode 100755 index 0000000..8a61647 --- /dev/null +++ b/src/mac/region/RegionKR920.h @@ -0,0 +1,478 @@ +/*! + * \file RegionKR920.h + * + * \brief Region definition for KR920 + * + * \copyright Revised BSD License, see section \ref LICENSE. + * + * \code + * ______ _ + * / _____) _ | | + * ( (____ _____ ____ _| |_ _____ ____| |__ + * \____ \| ___ | (_ _) ___ |/ ___) _ \ + * _____) ) ____| | | || |_| ____( (___| | | | + * (______/|_____)_|_|_| \__)_____)\____)_| |_| + * (C)2013 Semtech + * + * ___ _____ _ ___ _ _____ ___ ___ ___ ___ + * / __|_ _/_\ / __| |/ / __/ _ \| _ \/ __| __| + * \__ \ | |/ _ \ (__| ' <| _| (_) | / (__| _| + * |___/ |_/_/ \_\___|_|\_\_| \___/|_|_\\___|___| + * embedded.connectivity.solutions=============== + * + * \endcode + * + * \author Miguel Luis ( Semtech ) + * + * \author Gregory Cristian ( Semtech ) + * + * \author Daniel Jaeckle ( STACKFORCE ) + * + * \defgroup REGIONKR920 Region KR920 + * Implementation according to LoRaWAN Specification v1.0.2. + * \{ + */ +#ifndef __REGION_KR920_H__ +#define __REGION_KR920_H__ + +/*! + * LoRaMac maximum number of channels + */ +#define KR920_MAX_NB_CHANNELS 16 + +/*! + * Number of default channels + */ +#define KR920_NUMB_DEFAULT_CHANNELS 3 + +/*! + * Number of channels to apply for the CF list + */ +#define KR920_NUMB_CHANNELS_CF_LIST 5 + +/*! + * Minimal datarate that can be used by the node + */ +#define KR920_TX_MIN_DATARATE DR_0 + +/*! + * Maximal datarate that can be used by the node + */ +#define KR920_TX_MAX_DATARATE DR_5 + +/*! + * Minimal datarate that can be used by the node + */ +#define KR920_RX_MIN_DATARATE DR_0 + +/*! + * Maximal datarate that can be used by the node + */ +#define KR920_RX_MAX_DATARATE DR_5 + +/*! + * Default datarate used by the node + */ +#define KR920_DEFAULT_DATARATE DR_0 + +/*! + * Minimal Rx1 receive datarate offset + */ +#define KR920_MIN_RX1_DR_OFFSET 0 + +/*! + * Maximal Rx1 receive datarate offset + */ +#define KR920_MAX_RX1_DR_OFFSET 5 + +/*! + * Default Rx1 receive datarate offset + */ +#define KR920_DEFAULT_RX1_DR_OFFSET 0 + +/*! + * Minimal Tx output power that can be used by the node + */ +#define KR920_MIN_TX_POWER TX_POWER_7 + +/*! + * Maximal Tx output power that can be used by the node + */ +#define KR920_MAX_TX_POWER TX_POWER_0 + +/*! + * Default Tx output power used by the node + */ +#define KR920_DEFAULT_TX_POWER TX_POWER_0 + +/*! + * Default Max EIRP for frequency 920.9 MHz - 921.9 MHz + */ +#define KR920_DEFAULT_MAX_EIRP_LOW 10.0f + +/*! + * Default Max EIRP for frequency 922.1 MHz - 923.3 MHz + */ +#define KR920_DEFAULT_MAX_EIRP_HIGH 14.0f + +/*! + * Default antenna gain + */ +#define KR920_DEFAULT_ANTENNA_GAIN 2.15f + +/*! + * ADR Ack limit + */ +#define KR920_ADR_ACK_LIMIT 64 + +/*! + * ADR Ack delay + */ +#define KR920_ADR_ACK_DELAY 32 + +/*! + * Enabled or disabled the duty cycle + */ +#define KR920_DUTY_CYCLE_ENABLED 0 + +/*! + * Maximum RX window duration + */ +#define KR920_MAX_RX_WINDOW 4000 + +/*! + * Receive delay 1 + */ +#define KR920_RECEIVE_DELAY1 1000 + +/*! + * Receive delay 2 + */ +#define KR920_RECEIVE_DELAY2 2000 + +/*! + * Join accept delay 1 + */ +#define KR920_JOIN_ACCEPT_DELAY1 5000 + +/*! + * Join accept delay 2 + */ +#define KR920_JOIN_ACCEPT_DELAY2 6000 + +/*! + * Maximum frame counter gap + */ +#define KR920_MAX_FCNT_GAP 16384 + +/*! + * Ack timeout + */ +#define KR920_ACKTIMEOUT 2000 + +/*! + * Random ack timeout limits + */ +#define KR920_ACK_TIMEOUT_RND 1000 + +#if ( KR920_DEFAULT_DATARATE > DR_5 ) +#error "A default DR higher than DR_5 may lead to connectivity loss." +#endif + +/*! + * Second reception window channel frequency definition. + */ +#define KR920_RX_WND_2_FREQ 921900000 + +/*! + * Second reception window channel datarate definition. + */ +#define KR920_RX_WND_2_DR DR_0 + +/*! + * Maximum number of bands + */ +#define KR920_MAX_NB_BANDS 1 + +/*! + * Band 0 definition + * { DutyCycle, TxMaxPower, LastTxDoneTime, TimeOff } + */ +#define KR920_BAND0 { 1 , KR920_MAX_TX_POWER, 0, 0 } // 100.0 % + +/*! + * LoRaMac default channel 1 + * Channel = { Frequency [Hz], RX1 Frequency [Hz], { ( ( DrMax << 4 ) | DrMin ) }, Band } + */ +#define KR920_LC1 { 922100000, 0, { ( ( DR_5 << 4 ) | DR_0 ) }, 0 } + +/*! + * LoRaMac default channel 2 + * Channel = { Frequency [Hz], RX1 Frequency [Hz], { ( ( DrMax << 4 ) | DrMin ) }, Band } + */ +#define KR920_LC2 { 922300000, 0, { ( ( DR_5 << 4 ) | DR_0 ) }, 0 } + +/*! + * LoRaMac default channel 3 + * Channel = { Frequency [Hz], RX1 Frequency [Hz], { ( ( DrMax << 4 ) | DrMin ) }, Band } + */ +#define KR920_LC3 { 922500000, 0, { ( ( DR_5 << 4 ) | DR_0 ) }, 0 } + +/*! + * LoRaMac channels which are allowed for the join procedure + */ +#define KR920_JOIN_CHANNELS ( uint16_t )( LC( 1 ) | LC( 2 ) | LC( 3 ) ) + +/*! + * RSSI threshold for a free channel [dBm] + */ +#define KR920_RSSI_FREE_TH -65 + +/*! + * Specifies the time the node performs a carrier sense + */ +#define KR920_CARRIER_SENSE_TIME 6 + +/*! + * Data rates table definition + */ +static const uint8_t DataratesKR920[] = { 12, 11, 10, 9, 8, 7 }; + +/*! + * Bandwidths table definition in Hz + */ +static const uint32_t BandwidthsKR920[] = { 125000, 125000, 125000, 125000, 125000, 125000 }; + +/*! + * Maximum payload with respect to the datarate index. Can operate with and without a repeater. + */ +static const uint8_t MaxPayloadOfDatarateKR920[] = { 51, 51, 51, 115, 242, 242 }; + +/*! + * Maximum payload with respect to the datarate index. Can operate with repeater. + */ +static const uint8_t MaxPayloadOfDatarateRepeaterKR920[] = { 51, 51, 51, 115, 222, 222 }; + +/*! + * \brief The function gets a value of a specific phy attribute. + * + * \param [IN] getPhy Pointer to the function parameters. + * + * \retval Returns a structure containing the PHY parameter. + */ +PhyParam_t RegionKR920GetPhyParam( GetPhyParams_t* getPhy ); + +/*! + * \brief Updates the last TX done parameters of the current channel. + * + * \param [IN] txDone Pointer to the function parameters. + */ +void RegionKR920SetBandTxDone( SetBandTxDoneParams_t* txDone ); + +/*! + * \brief Initializes the channels masks and the channels. + * + * \param [IN] type Sets the initialization type. + */ +void RegionKR920InitDefaults( InitType_t type ); + +/*! + * \brief Verifies a parameter. + * + * \param [IN] verify Pointer to the function parameters. + * + * \param [IN] type Sets the initialization type. + * + * \retval Returns true, if the parameter is valid. + */ +bool RegionKR920Verify( VerifyParams_t* verify, PhyAttribute_t phyAttribute ); + +/*! + * \brief The function parses the input buffer and sets up the channels of the + * CF list. + * + * \param [IN] applyCFList Pointer to the function parameters. + */ +void RegionKR920ApplyCFList( ApplyCFListParams_t* applyCFList ); + +/*! + * \brief Sets a channels mask. + * + * \param [IN] chanMaskSet Pointer to the function parameters. + * + * \retval Returns true, if the channels mask could be set. + */ +bool RegionKR920ChanMaskSet( ChanMaskSetParams_t* chanMaskSet ); + +/*! + * \brief Calculates the next datarate to set, when ADR is on or off. + * + * \param [IN] adrNext Pointer to the function parameters. + * + * \param [OUT] drOut The calculated datarate for the next TX. + * + * \param [OUT] txPowOut The TX power for the next TX. + * + * \param [OUT] adrAckCounter The calculated ADR acknowledgement counter. + * + * \retval Returns true, if an ADR request should be performed. + */ +bool RegionKR920AdrNext( AdrNextParams_t* adrNext, int8_t* drOut, int8_t* txPowOut, uint32_t* adrAckCounter ); + +/*! + * Computes the Rx window timeout and offset. + * + * \param [IN] datarate Rx window datarate index to be used + * + * \param [IN] minRxSymbols Minimum required number of symbols to detect an Rx frame. + * + * \param [IN] rxError System maximum timing error of the receiver. In milliseconds + * The receiver will turn on in a [-rxError : +rxError] ms + * interval around RxOffset + * + * \param [OUT]rxConfigParams Returns updated WindowTimeout and WindowOffset fields. + */ +void RegionKR920ComputeRxWindowParameters( int8_t datarate, uint8_t minRxSymbols, uint32_t rxError, RxConfigParams_t *rxConfigParams ); + +/*! + * \brief Configuration of the RX windows. + * + * \param [IN] rxConfig Pointer to the function parameters. + * + * \param [OUT] datarate The datarate index which was set. + * + * \retval Returns true, if the configuration was applied successfully. + */ +bool RegionKR920RxConfig( RxConfigParams_t* rxConfig, int8_t* datarate ); + +/*! + * \brief TX configuration. + * + * \param [IN] txConfig Pointer to the function parameters. + * + * \param [OUT] txPower The tx power index which was set. + * + * \param [OUT] txTimeOnAir The time-on-air of the frame. + * + * \retval Returns true, if the configuration was applied successfully. + */ +bool RegionKR920TxConfig( TxConfigParams_t* txConfig, int8_t* txPower, TimerTime_t* txTimeOnAir ); + +/*! + * \brief The function processes a Link ADR Request. + * + * \param [IN] linkAdrReq Pointer to the function parameters. + * + * \retval Returns the status of the operation, according to the LoRaMAC specification. + */ +uint8_t RegionKR920LinkAdrReq( LinkAdrReqParams_t* linkAdrReq, int8_t* drOut, int8_t* txPowOut, uint8_t* nbRepOut, uint8_t* nbBytesParsed ); + +/*! + * \brief The function processes a RX Parameter Setup Request. + * + * \param [IN] rxParamSetupReq Pointer to the function parameters. + * + * \retval Returns the status of the operation, according to the LoRaMAC specification. + */ +uint8_t RegionKR920RxParamSetupReq( RxParamSetupReqParams_t* rxParamSetupReq ); + +/*! + * \brief The function processes a Channel Request. + * + * \param [IN] newChannelReq Pointer to the function parameters. + * + * \retval Returns the status of the operation, according to the LoRaMAC specification. + */ +uint8_t RegionKR920NewChannelReq( NewChannelReqParams_t* newChannelReq ); + +/*! + * \brief The function processes a TX ParamSetup Request. + * + * \param [IN] txParamSetupReq Pointer to the function parameters. + * + * \retval Returns the status of the operation, according to the LoRaMAC specification. + * Returns -1, if the functionality is not implemented. In this case, the end node + * shall not process the command. + */ +int8_t RegionKR920TxParamSetupReq( TxParamSetupReqParams_t* txParamSetupReq ); + +/*! + * \brief The function processes a DlChannel Request. + * + * \param [IN] dlChannelReq Pointer to the function parameters. + * + * \retval Returns the status of the operation, according to the LoRaMAC specification. + */ +uint8_t RegionKR920DlChannelReq( DlChannelReqParams_t* dlChannelReq ); + +/*! + * \brief Alternates the datarate of the channel for the join request. + * + * \param [IN] alternateDr Pointer to the function parameters. + * + * \retval Datarate to apply. + */ +int8_t RegionKR920AlternateDr( AlternateDrParams_t* alternateDr ); + +/*! + * \brief Calculates the back-off time. + * + * \param [IN] calcBackOff Pointer to the function parameters. + */ +void RegionKR920CalcBackOff( CalcBackOffParams_t* calcBackOff ); + +/*! + * \brief Searches and set the next random available channel + * + * \param [OUT] channel Next channel to use for TX. + * + * \param [OUT] time Time to wait for the next transmission according to the duty + * cycle. + * + * \param [OUT] aggregatedTimeOff Updates the aggregated time off. + * + * \retval Function status [1: OK, 0: Unable to find a channel on the current datarate] + */ +bool RegionKR920NextChannel( NextChanParams_t* nextChanParams, uint8_t* channel, TimerTime_t* time, TimerTime_t* aggregatedTimeOff ); + +/*! + * \brief Adds a channel. + * + * \param [IN] channelAdd Pointer to the function parameters. + * + * \retval Status of the operation. + */ +LoRaMacStatus_t RegionKR920ChannelAdd( ChannelAddParams_t* channelAdd ); + +/*! + * \brief Removes a channel. + * + * \param [IN] channelRemove Pointer to the function parameters. + * + * \retval Returns true, if the channel was removed successfully. + */ +bool RegionKR920ChannelsRemove( ChannelRemoveParams_t* channelRemove ); + +/*! + * \brief Sets the radio into continuous wave mode. + * + * \param [IN] continuousWave Pointer to the function parameters. + */ +void RegionKR920SetContinuousWave( ContinuousWaveParams_t* continuousWave ); + +/*! + * \brief Computes new datarate according to the given offset + * + * \param [IN] downlinkDwellTime Downlink dwell time configuration. 0: No limit, 1: 400ms + * + * \param [IN] dr Current datarate + * + * \param [IN] drOffset Offset to be applied + * + * \retval newDr Computed datarate. + */ +uint8_t RegionKR920ApplyDrOffset( uint8_t downlinkDwellTime, int8_t dr, int8_t drOffset ); + +/*! \} defgroup REGIONKR920 */ + +#endif // __REGION_KR920_H__ diff --git a/src/mac/region/RegionUS915-Hybrid.c b/src/mac/region/RegionUS915-Hybrid.c new file mode 100755 index 0000000..426e40d --- /dev/null +++ b/src/mac/region/RegionUS915-Hybrid.c @@ -0,0 +1,958 @@ +/* + / _____) _ | | +( (____ _____ ____ _| |_ _____ ____| |__ + \____ \| ___ | (_ _) ___ |/ ___) _ \ + _____) ) ____| | | || |_| ____( (___| | | | +(______/|_____)_|_|_| \__)_____)\____)_| |_| + (C)2013 Semtech + ___ _____ _ ___ _ _____ ___ ___ ___ ___ +/ __|_ _/_\ / __| |/ / __/ _ \| _ \/ __| __| +\__ \ | |/ _ \ (__| ' <| _| (_) | / (__| _| +|___/ |_/_/ \_\___|_|\_\_| \___/|_|_\\___|___| +embedded.connectivity.solutions=============== + +Description: LoRa MAC region US915 Hybrid implementation + +License: Revised BSD License, see LICENSE.TXT file include in the project + +Maintainer: Miguel Luis ( Semtech ), Gregory Cristian ( Semtech ) and Daniel Jaeckle ( STACKFORCE ) +*/ +#include +#include +#include +#include + +#include "board.h" +#include "LoRaMac.h" + +#include "utilities.h" + +#include "Region.h" +#include "RegionCommon.h" +#include "RegionUS915-Hybrid.h" + +// Definitions +#define CHANNELS_MASK_SIZE 6 + +// Global attributes +/*! + * LoRaMAC channels + */ +static ChannelParams_t Channels[US915_HYBRID_MAX_NB_CHANNELS]; + +/*! + * LoRaMac bands + */ +static Band_t Bands[US915_HYBRID_MAX_NB_BANDS] = +{ + US915_HYBRID_BAND0 +}; + +/*! + * LoRaMac channels mask + */ +static uint16_t ChannelsMask[CHANNELS_MASK_SIZE]; + +/*! + * LoRaMac channels remaining + */ +static uint16_t ChannelsMaskRemaining[CHANNELS_MASK_SIZE]; + +/*! + * LoRaMac channels default mask + */ +static uint16_t ChannelsDefaultMask[CHANNELS_MASK_SIZE]; + +// Static functions +static int8_t GetNextLowerTxDr( int8_t dr, int8_t minDr ) +{ + uint8_t nextLowerDr = 0; + + if( dr == minDr ) + { + nextLowerDr = minDr; + } + else + { + nextLowerDr = dr - 1; + } + return nextLowerDr; +} + +static uint32_t GetBandwidth( uint32_t drIndex ) +{ + switch( BandwidthsUS915_HYBRID[drIndex] ) + { + default: + case 125000: + return 0; + case 250000: + return 1; + case 500000: + return 2; + } +} + +static void ReenableChannels( uint16_t mask, uint16_t* channelsMask ) +{ + uint16_t blockMask = mask; + + for( uint8_t i = 0, j = 0; i < 4; i++, j += 2 ) + { + channelsMask[i] = 0; + if( ( blockMask & ( 1 << j ) ) != 0 ) + { + channelsMask[i] |= 0x00FF; + } + if( ( blockMask & ( 1 << ( j + 1 ) ) ) != 0 ) + { + channelsMask[i] |= 0xFF00; + } + } + channelsMask[4] = blockMask; + channelsMask[5] = 0x0000; +} + +static uint8_t CountBits( uint16_t mask, uint8_t nbBits ) +{ + uint8_t nbActiveBits = 0; + + for( uint8_t j = 0; j < nbBits; j++ ) + { + if( ( mask & ( 1 << j ) ) == ( 1 << j ) ) + { + nbActiveBits++; + } + } + return nbActiveBits; +} + +static int8_t LimitTxPower( int8_t txPower, int8_t maxBandTxPower, int8_t datarate, uint16_t* channelsMask ) +{ + int8_t txPowerResult = txPower; + + // Limit tx power to the band max + txPowerResult = MAX( txPower, maxBandTxPower ); + + if( datarate == DR_4 ) + {// Limit tx power to max 26dBm + txPowerResult = MAX( txPower, TX_POWER_2 ); + } + else + { + if( RegionCommonCountChannels( channelsMask, 0, 4 ) < 50 ) + {// Limit tx power to max 21dBm + txPowerResult = MAX( txPower, TX_POWER_5 ); + } + } + return txPowerResult; +} + +static bool ValidateChannelsMask( uint16_t* channelsMask ) +{ + bool chanMaskState = false; + uint16_t block1 = 0; + uint16_t block2 = 0; + uint8_t index = 0; + uint16_t channelsMaskCpy[6]; + + // Copy channels mask to not change the input + for( uint8_t i = 0; i < 4; i++ ) + { + channelsMaskCpy[i] = channelsMask[i]; + } + + for( uint8_t i = 0; i < 4; i++ ) + { + block1 = channelsMaskCpy[i] & 0x00FF; + block2 = channelsMaskCpy[i] & 0xFF00; + + if( CountBits( block1, 16 ) > 5 ) + { + channelsMaskCpy[i] &= block1; + channelsMaskCpy[4] = 1 << ( i * 2 ); + chanMaskState = true; + index = i; + break; + } + else if( CountBits( block2, 16 ) > 5 ) + { + channelsMaskCpy[i] &= block2; + channelsMaskCpy[4] = 1 << ( i * 2 + 1 ); + chanMaskState = true; + index = i; + break; + } + } + + // Do only change the channel mask, if we have found a valid block. + if( chanMaskState == true ) + { + // Copy channels mask back again + for( uint8_t i = 0; i < 4; i++ ) + { + channelsMask[i] = channelsMaskCpy[i]; + + if( i != index ) + { + channelsMask[i] = 0; + } + } + channelsMask[4] = channelsMaskCpy[4]; + } + return chanMaskState; +} + +static uint8_t CountNbOfEnabledChannels( uint8_t datarate, uint16_t* channelsMask, ChannelParams_t* channels, Band_t* bands, uint8_t* enabledChannels, uint8_t* delayTx ) +{ + uint8_t nbEnabledChannels = 0; + uint8_t delayTransmission = 0; + + for( uint8_t i = 0, k = 0; i < US915_HYBRID_MAX_NB_CHANNELS; i += 16, k++ ) + { + for( uint8_t j = 0; j < 16; j++ ) + { + if( ( channelsMask[k] & ( 1 << j ) ) != 0 ) + { + if( channels[i + j].Frequency == 0 ) + { // Check if the channel is enabled + continue; + } + if( RegionCommonValueInRange( datarate, channels[i + j].DrRange.Fields.Min, + channels[i + j].DrRange.Fields.Max ) == false ) + { // Check if the current channel selection supports the given datarate + continue; + } + if( bands[channels[i + j].Band].TimeOff > 0 ) + { // Check if the band is available for transmission + delayTransmission++; + continue; + } + enabledChannels[nbEnabledChannels++] = i + j; + } + } + } + + *delayTx = delayTransmission; + return nbEnabledChannels; +} + +PhyParam_t RegionUS915HybridGetPhyParam( GetPhyParams_t* getPhy ) +{ + PhyParam_t phyParam = { 0 }; + + switch( getPhy->Attribute ) + { + case PHY_MIN_RX_DR: + { + phyParam.Value = US915_HYBRID_RX_MIN_DATARATE; + break; + } + case PHY_MIN_TX_DR: + { + phyParam.Value = US915_HYBRID_TX_MIN_DATARATE; + break; + } + case PHY_DEF_TX_DR: + { + phyParam.Value = US915_HYBRID_DEFAULT_DATARATE; + break; + } + case PHY_NEXT_LOWER_TX_DR: + { + phyParam.Value = GetNextLowerTxDr( getPhy->Datarate, US915_HYBRID_TX_MIN_DATARATE ); + break; + } + case PHY_DEF_TX_POWER: + { + phyParam.Value = US915_HYBRID_DEFAULT_TX_POWER; + break; + } + case PHY_MAX_PAYLOAD: + { + phyParam.Value = MaxPayloadOfDatarateUS915_HYBRID[getPhy->Datarate]; + break; + } + case PHY_MAX_PAYLOAD_REPEATER: + { + phyParam.Value = MaxPayloadOfDatarateRepeaterUS915_HYBRID[getPhy->Datarate]; + break; + } + case PHY_DUTY_CYCLE: + { + phyParam.Value = US915_HYBRID_DUTY_CYCLE_ENABLED; + break; + } + case PHY_MAX_RX_WINDOW: + { + phyParam.Value = US915_HYBRID_MAX_RX_WINDOW; + break; + } + case PHY_RECEIVE_DELAY1: + { + phyParam.Value = US915_HYBRID_RECEIVE_DELAY1; + break; + } + case PHY_RECEIVE_DELAY2: + { + phyParam.Value = US915_HYBRID_RECEIVE_DELAY2; + break; + } + case PHY_JOIN_ACCEPT_DELAY1: + { + phyParam.Value = US915_HYBRID_JOIN_ACCEPT_DELAY1; + break; + } + case PHY_JOIN_ACCEPT_DELAY2: + { + phyParam.Value = US915_HYBRID_JOIN_ACCEPT_DELAY2; + break; + } + case PHY_MAX_FCNT_GAP: + { + phyParam.Value = US915_HYBRID_MAX_FCNT_GAP; + break; + } + case PHY_ACK_TIMEOUT: + { + phyParam.Value = ( US915_HYBRID_ACKTIMEOUT + randr( -US915_HYBRID_ACK_TIMEOUT_RND, US915_HYBRID_ACK_TIMEOUT_RND ) ); + break; + } + case PHY_DEF_DR1_OFFSET: + { + phyParam.Value = US915_HYBRID_DEFAULT_RX1_DR_OFFSET; + break; + } + case PHY_DEF_RX2_FREQUENCY: + { + phyParam.Value = US915_HYBRID_RX_WND_2_FREQ; + break; + } + case PHY_DEF_RX2_DR: + { + phyParam.Value = US915_HYBRID_RX_WND_2_DR; + break; + } + case PHY_CHANNELS_MASK: + { + phyParam.ChannelsMask = ChannelsMask; + break; + } + case PHY_CHANNELS_DEFAULT_MASK: + { + phyParam.ChannelsMask = ChannelsDefaultMask; + break; + } + case PHY_MAX_NB_CHANNELS: + { + phyParam.Value = US915_HYBRID_MAX_NB_CHANNELS; + break; + } + case PHY_CHANNELS: + { + phyParam.Channels = Channels; + break; + } + case PHY_DEF_UPLINK_DWELL_TIME: + case PHY_DEF_DOWNLINK_DWELL_TIME: + { + phyParam.Value = 0; + break; + } + case PHY_DEF_MAX_EIRP: + case PHY_DEF_ANTENNA_GAIN: + { + phyParam.fValue = 0; + break; + } + case PHY_NB_JOIN_TRIALS: + case PHY_DEF_NB_JOIN_TRIALS: + { + phyParam.Value = 2; + break; + } + default: + { + break; + } + } + + return phyParam; +} + +void RegionUS915HybridSetBandTxDone( SetBandTxDoneParams_t* txDone ) +{ + RegionCommonSetBandTxDone( txDone->Joined, &Bands[Channels[txDone->Channel].Band], txDone->LastTxDoneTime ); +} + +void RegionUS915HybridInitDefaults( InitType_t type ) +{ + switch( type ) + { + case INIT_TYPE_INIT: + { + // Channels + // 125 kHz channels + for( uint8_t i = 0; i < US915_HYBRID_MAX_NB_CHANNELS - 8; i++ ) + { + Channels[i].Frequency = 902300000 + i * 200000; + Channels[i].DrRange.Value = ( DR_3 << 4 ) | DR_0; + Channels[i].Band = 0; + } + // 500 kHz channels + for( uint8_t i = US915_HYBRID_MAX_NB_CHANNELS - 8; i < US915_HYBRID_MAX_NB_CHANNELS; i++ ) + { + Channels[i].Frequency = 903000000 + ( i - ( US915_HYBRID_MAX_NB_CHANNELS - 8 ) ) * 1600000; + Channels[i].DrRange.Value = ( DR_4 << 4 ) | DR_4; + Channels[i].Band = 0; + } + + // ChannelsMask + ChannelsDefaultMask[0] = 0x00FF; + ChannelsDefaultMask[1] = 0x0000; + ChannelsDefaultMask[2] = 0x0000; + ChannelsDefaultMask[3] = 0x0000; + ChannelsDefaultMask[4] = 0x0001; + ChannelsDefaultMask[5] = 0x0000; + + // Copy channels default mask + RegionCommonChanMaskCopy( ChannelsMask, ChannelsDefaultMask, 6 ); + + // Copy into channels mask remaining + RegionCommonChanMaskCopy( ChannelsMaskRemaining, ChannelsMask, 6 ); + break; + } + case INIT_TYPE_RESTORE: + { + ReenableChannels( ChannelsDefaultMask[4], ChannelsMask ); + + for( uint8_t i = 0; i < 6; i++ ) + { // Copy-And the channels mask + ChannelsMaskRemaining[i] &= ChannelsMask[i]; + } + } + default: + { + break; + } + } +} + +bool RegionUS915HybridVerify( VerifyParams_t* verify, PhyAttribute_t phyAttribute ) +{ + switch( phyAttribute ) + { + case PHY_TX_DR: + { + return RegionCommonValueInRange( verify->DatarateParams.Datarate, US915_HYBRID_TX_MIN_DATARATE, US915_HYBRID_TX_MAX_DATARATE ); + } + case PHY_DEF_TX_DR: + { + return RegionCommonValueInRange( verify->DatarateParams.Datarate, DR_0, DR_5 ); + } + case PHY_RX_DR: + { + return RegionCommonValueInRange( verify->DatarateParams.Datarate, US915_HYBRID_RX_MIN_DATARATE, US915_HYBRID_RX_MAX_DATARATE ); + } + case PHY_DEF_TX_POWER: + case PHY_TX_POWER: + { + // Remark: switched min and max! + return RegionCommonValueInRange( verify->TxPower, US915_HYBRID_MAX_TX_POWER, US915_HYBRID_MIN_TX_POWER ); + } + case PHY_DUTY_CYCLE: + { + return US915_HYBRID_DUTY_CYCLE_ENABLED; + } + case PHY_NB_JOIN_TRIALS: + { + if( verify->NbJoinTrials < 2 ) + { + return false; + } + break; + } + default: + return false; + } + return true; +} + +void RegionUS915HybridApplyCFList( ApplyCFListParams_t* applyCFList ) +{ + return; +} + +bool RegionUS915HybridChanMaskSet( ChanMaskSetParams_t* chanMaskSet ) +{ + uint8_t nbChannels = RegionCommonCountChannels( chanMaskSet->ChannelsMaskIn, 0, 4 ); + + // Check the number of active channels + if( ( nbChannels < 2 ) && + ( nbChannels > 0 ) ) + { + return false; + } + + // Validate the channels mask + if( ValidateChannelsMask( chanMaskSet->ChannelsMaskIn ) == false ) + { + return false; + } + + switch( chanMaskSet->ChannelsMaskType ) + { + case CHANNELS_MASK: + { + RegionCommonChanMaskCopy( ChannelsMask, chanMaskSet->ChannelsMaskIn, 6 ); + + for( uint8_t i = 0; i < 6; i++ ) + { // Copy-And the channels mask + ChannelsMaskRemaining[i] &= ChannelsMask[i]; + } + break; + } + case CHANNELS_DEFAULT_MASK: + { + RegionCommonChanMaskCopy( ChannelsDefaultMask, chanMaskSet->ChannelsMaskIn, 6 ); + break; + } + default: + return false; + } + return true; +} + +bool RegionUS915HybridAdrNext( AdrNextParams_t* adrNext, int8_t* drOut, int8_t* txPowOut, uint32_t* adrAckCounter ) +{ + bool adrAckReq = false; + int8_t datarate = adrNext->Datarate; + int8_t txPower = adrNext->TxPower; + GetPhyParams_t getPhy; + PhyParam_t phyParam; + + // Report back the adr ack counter + *adrAckCounter = adrNext->AdrAckCounter; + + if( adrNext->AdrEnabled == true ) + { + if( datarate == US915_HYBRID_TX_MIN_DATARATE ) + { + *adrAckCounter = 0; + adrAckReq = false; + } + else + { + if( adrNext->AdrAckCounter >= US915_HYBRID_ADR_ACK_LIMIT ) + { + adrAckReq = true; + txPower = US915_HYBRID_MAX_TX_POWER; + } + else + { + adrAckReq = false; + } + if( adrNext->AdrAckCounter >= ( US915_HYBRID_ADR_ACK_LIMIT + US915_HYBRID_ADR_ACK_DELAY ) ) + { + if( ( adrNext->AdrAckCounter % US915_HYBRID_ADR_ACK_DELAY ) == 1 ) + { + // Decrease the datarate + getPhy.Attribute = PHY_NEXT_LOWER_TX_DR; + getPhy.Datarate = datarate; + getPhy.UplinkDwellTime = adrNext->UplinkDwellTime; + phyParam = RegionUS915HybridGetPhyParam( &getPhy ); + datarate = phyParam.Value; + + if( datarate == US915_HYBRID_TX_MIN_DATARATE ) + { + // We must set adrAckReq to false as soon as we reach the lowest datarate + adrAckReq = false; + if( adrNext->UpdateChanMask == true ) + { + // Re-enable default channels + ReenableChannels( ChannelsMask[4], ChannelsMask ); + } + } + } + } + } + } + + *drOut = datarate; + *txPowOut = txPower; + return adrAckReq; +} + +void RegionUS915HybridComputeRxWindowParameters( int8_t datarate, uint8_t minRxSymbols, uint32_t rxError, RxConfigParams_t *rxConfigParams ) +{ + double tSymbol = 0.0; + + // Get the datarate, perform a boundary check + rxConfigParams->Datarate = MIN( datarate, US915_HYBRID_RX_MAX_DATARATE ); + rxConfigParams->Bandwidth = GetBandwidth( rxConfigParams->Datarate ); + + tSymbol = RegionCommonComputeSymbolTimeLoRa( DataratesUS915_HYBRID[rxConfigParams->Datarate], BandwidthsUS915_HYBRID[rxConfigParams->Datarate] ); + + RegionCommonComputeRxWindowParameters( tSymbol, minRxSymbols, rxError, RADIO_WAKEUP_TIME, &rxConfigParams->WindowTimeout, &rxConfigParams->WindowOffset ); +} + +bool RegionUS915HybridRxConfig( RxConfigParams_t* rxConfig, int8_t* datarate ) +{ + int8_t dr = rxConfig->Datarate; + uint8_t maxPayload = 0; + int8_t phyDr = 0; + uint32_t frequency = rxConfig->Frequency; + + if( Radio.GetStatus( ) != RF_IDLE ) + { + return false; + } + + if( rxConfig->Window == 0 ) + { + // Apply window 1 frequency + frequency = US915_HYBRID_FIRST_RX1_CHANNEL + ( rxConfig->Channel % 8 ) * US915_HYBRID_STEPWIDTH_RX1_CHANNEL; + } + + // Read the physical datarate from the datarates table + phyDr = DataratesUS915_HYBRID[dr]; + + Radio.SetChannel( frequency ); + + // Radio configuration + Radio.SetRxConfig( MODEM_LORA, rxConfig->Bandwidth, phyDr, 1, 0, 8, rxConfig->WindowTimeout, false, 0, false, 0, 0, true, rxConfig->RxContinuous ); + + if( rxConfig->RepeaterSupport == true ) + { + maxPayload = MaxPayloadOfDatarateRepeaterUS915_HYBRID[dr]; + } + else + { + maxPayload = MaxPayloadOfDatarateUS915_HYBRID[dr]; + } + Radio.SetMaxPayloadLength( MODEM_LORA, maxPayload + LORA_MAC_FRMPAYLOAD_OVERHEAD ); + + *datarate = (uint8_t) dr; + return true; +} + +bool RegionUS915HybridTxConfig( TxConfigParams_t* txConfig, int8_t* txPower, TimerTime_t* txTimeOnAir ) +{ + int8_t phyDr = DataratesUS915_HYBRID[txConfig->Datarate]; + int8_t txPowerLimited = LimitTxPower( txConfig->TxPower, Bands[Channels[txConfig->Channel].Band].TxMaxPower, txConfig->Datarate, ChannelsMask ); + uint32_t bandwidth = GetBandwidth( txConfig->Datarate ); + int8_t phyTxPower = 0; + + // Calculate physical TX power + phyTxPower = RegionCommonComputeTxPower( txPowerLimited, US915_HYBRID_DEFAULT_MAX_ERP, 0 ); + + // Setup the radio frequency + Radio.SetChannel( Channels[txConfig->Channel].Frequency ); + + Radio.SetTxConfig( MODEM_LORA, phyTxPower, 0, bandwidth, phyDr, 1, 8, false, true, 0, 0, false, 3000 ); + + // Setup maximum payload lenght of the radio driver + Radio.SetMaxPayloadLength( MODEM_LORA, txConfig->PktLen ); + // Get the time-on-air of the next tx frame + *txTimeOnAir = Radio.TimeOnAir( MODEM_LORA, txConfig->PktLen ); + *txPower = txPowerLimited; + + return true; +} + +uint8_t RegionUS915HybridLinkAdrReq( LinkAdrReqParams_t* linkAdrReq, int8_t* drOut, int8_t* txPowOut, uint8_t* nbRepOut, uint8_t* nbBytesParsed ) +{ + uint8_t status = 0x07; + RegionCommonLinkAdrParams_t linkAdrParams; + uint8_t nextIndex = 0; + uint8_t bytesProcessed = 0; + uint16_t channelsMask[6] = { 0, 0, 0, 0, 0, 0 }; + GetPhyParams_t getPhy; + PhyParam_t phyParam; + RegionCommonLinkAdrReqVerifyParams_t linkAdrVerifyParams; + + // Initialize local copy of channels mask + RegionCommonChanMaskCopy( channelsMask, ChannelsMask, 6 ); + + while( bytesProcessed < linkAdrReq->PayloadSize ) + { + nextIndex = RegionCommonParseLinkAdrReq( &( linkAdrReq->Payload[bytesProcessed] ), &linkAdrParams ); + + if( nextIndex == 0 ) + break; // break loop, since no more request has been found + + // Update bytes processed + bytesProcessed += nextIndex; + + // Revert status, as we only check the last ADR request for the channel mask KO + status = 0x07; + + if( linkAdrParams.ChMaskCtrl == 6 ) + { + // Enable all 125 kHz channels + channelsMask[0] = 0xFFFF; + channelsMask[1] = 0xFFFF; + channelsMask[2] = 0xFFFF; + channelsMask[3] = 0xFFFF; + // Apply chMask to channels 64 to 71 + channelsMask[4] = linkAdrParams.ChMask; + } + else if( linkAdrParams.ChMaskCtrl == 7 ) + { + // Disable all 125 kHz channels + channelsMask[0] = 0x0000; + channelsMask[1] = 0x0000; + channelsMask[2] = 0x0000; + channelsMask[3] = 0x0000; + // Apply chMask to channels 64 to 71 + channelsMask[4] = linkAdrParams.ChMask; + } + else if( linkAdrParams.ChMaskCtrl == 5 ) + { + // RFU + status &= 0xFE; // Channel mask KO + } + else + { + channelsMask[linkAdrParams.ChMaskCtrl] = linkAdrParams.ChMask; + } + } + + // FCC 15.247 paragraph F mandates to hop on at least 2 125 kHz channels + if( ( linkAdrParams.Datarate < DR_4 ) && ( RegionCommonCountChannels( channelsMask, 0, 4 ) < 2 ) ) + { + status &= 0xFE; // Channel mask KO + } + + if( ValidateChannelsMask( channelsMask ) == false ) + { + status &= 0xFE; // Channel mask KO + } + + // Get the minimum possible datarate + getPhy.Attribute = PHY_MIN_TX_DR; + getPhy.UplinkDwellTime = linkAdrReq->UplinkDwellTime; + phyParam = RegionUS915HybridGetPhyParam( &getPhy ); + + linkAdrVerifyParams.Status = status; + linkAdrVerifyParams.AdrEnabled = linkAdrReq->AdrEnabled; + linkAdrVerifyParams.Datarate = linkAdrParams.Datarate; + linkAdrVerifyParams.TxPower = linkAdrParams.TxPower; + linkAdrVerifyParams.NbRep = linkAdrParams.NbRep; + linkAdrVerifyParams.CurrentDatarate = linkAdrReq->CurrentDatarate; + linkAdrVerifyParams.CurrentTxPower = linkAdrReq->CurrentTxPower; + linkAdrVerifyParams.CurrentNbRep = linkAdrReq->CurrentNbRep; + linkAdrVerifyParams.NbChannels = US915_HYBRID_MAX_NB_CHANNELS; + linkAdrVerifyParams.ChannelsMask = channelsMask; + linkAdrVerifyParams.MinDatarate = ( int8_t )phyParam.Value; + linkAdrVerifyParams.MaxDatarate = US915_HYBRID_TX_MAX_DATARATE; + linkAdrVerifyParams.Channels = Channels; + linkAdrVerifyParams.MinTxPower = US915_HYBRID_MIN_TX_POWER; + linkAdrVerifyParams.MaxTxPower = US915_HYBRID_MAX_TX_POWER; + + // Verify the parameters and update, if necessary + status = RegionCommonLinkAdrReqVerifyParams( &linkAdrVerifyParams, &linkAdrParams.Datarate, &linkAdrParams.TxPower, &linkAdrParams.NbRep ); + + // Update channelsMask if everything is correct + if( status == 0x07 ) + { + // Copy Mask + RegionCommonChanMaskCopy( ChannelsMask, channelsMask, 6 ); + + ChannelsMaskRemaining[0] &= ChannelsMask[0]; + ChannelsMaskRemaining[1] &= ChannelsMask[1]; + ChannelsMaskRemaining[2] &= ChannelsMask[2]; + ChannelsMaskRemaining[3] &= ChannelsMask[3]; + ChannelsMaskRemaining[4] = ChannelsMask[4]; + ChannelsMaskRemaining[5] = ChannelsMask[5]; + } + + // Update status variables + *drOut = linkAdrParams.Datarate; + *txPowOut = linkAdrParams.TxPower; + *nbRepOut = linkAdrParams.NbRep; + *nbBytesParsed = bytesProcessed; + + return status; +} + +uint8_t RegionUS915HybridRxParamSetupReq( RxParamSetupReqParams_t* rxParamSetupReq ) +{ + uint8_t status = 0x07; + uint32_t freq = rxParamSetupReq->Frequency; + + // Verify radio frequency + if( ( Radio.CheckRfFrequency( freq ) == false ) || + ( freq < US915_HYBRID_FIRST_RX1_CHANNEL ) || + ( freq > US915_HYBRID_LAST_RX1_CHANNEL ) || + ( ( ( freq - ( uint32_t ) US915_HYBRID_FIRST_RX1_CHANNEL ) % ( uint32_t ) US915_HYBRID_STEPWIDTH_RX1_CHANNEL ) != 0 ) ) + { + status &= 0xFE; // Channel frequency KO + } + + // Verify datarate + if( RegionCommonValueInRange( rxParamSetupReq->Datarate, US915_HYBRID_RX_MIN_DATARATE, US915_HYBRID_RX_MAX_DATARATE ) == false ) + { + status &= 0xFD; // Datarate KO + } + if( ( RegionCommonValueInRange( rxParamSetupReq->Datarate, DR_5, DR_7 ) == true ) || + ( rxParamSetupReq->Datarate > DR_13 ) ) + { + status &= 0xFD; // Datarate KO + } + + // Verify datarate offset + if( RegionCommonValueInRange( rxParamSetupReq->DrOffset, US915_HYBRID_MIN_RX1_DR_OFFSET, US915_HYBRID_MAX_RX1_DR_OFFSET ) == false ) + { + status &= 0xFB; // Rx1DrOffset range KO + } + + return status; +} + +uint8_t RegionUS915HybridNewChannelReq( NewChannelReqParams_t* newChannelReq ) +{ + // Datarate and frequency KO + return 0; +} + +int8_t RegionUS915HybridTxParamSetupReq( TxParamSetupReqParams_t* txParamSetupReq ) +{ + return -1; +} + +uint8_t RegionUS915HybridDlChannelReq( DlChannelReqParams_t* dlChannelReq ) +{ + return 0; +} + +int8_t RegionUS915HybridAlternateDr( AlternateDrParams_t* alternateDr ) +{ + int8_t datarate = 0; + + // Re-enable 500 kHz default channels + ReenableChannels( ChannelsMask[4], ChannelsMask ); + + if( ( alternateDr->NbTrials & 0x01 ) == 0x01 ) + { + datarate = DR_4; + } + else + { + datarate = DR_0; + } + return datarate; +} + +void RegionUS915HybridCalcBackOff( CalcBackOffParams_t* calcBackOff ) +{ + RegionCommonCalcBackOffParams_t calcBackOffParams; + + calcBackOffParams.Channels = Channels; + calcBackOffParams.Bands = Bands; + calcBackOffParams.LastTxIsJoinRequest = calcBackOff->LastTxIsJoinRequest; + calcBackOffParams.Joined = calcBackOff->Joined; + calcBackOffParams.DutyCycleEnabled = calcBackOff->DutyCycleEnabled; + calcBackOffParams.Channel = calcBackOff->Channel; + calcBackOffParams.ElapsedTime = calcBackOff->ElapsedTime; + calcBackOffParams.TxTimeOnAir = calcBackOff->TxTimeOnAir; + + RegionCommonCalcBackOff( &calcBackOffParams ); +} + +bool RegionUS915HybridNextChannel( NextChanParams_t* nextChanParams, uint8_t* channel, TimerTime_t* time, TimerTime_t* aggregatedTimeOff ) +{ + uint8_t nbEnabledChannels = 0; + uint8_t delayTx = 0; + uint8_t enabledChannels[US915_HYBRID_MAX_NB_CHANNELS] = { 0 }; + TimerTime_t nextTxDelay = 0; + + // Count 125kHz channels + if( RegionCommonCountChannels( ChannelsMaskRemaining, 0, 4 ) == 0 ) + { // Reactivate default channels + RegionCommonChanMaskCopy( ChannelsMaskRemaining, ChannelsMask, 4 ); + } + // Check other channels + if( nextChanParams->Datarate >= DR_4 ) + { + if( ( ChannelsMaskRemaining[4] & 0x00FF ) == 0 ) + { + ChannelsMaskRemaining[4] = ChannelsMask[4]; + } + } + + if( nextChanParams->AggrTimeOff <= TimerGetElapsedTime( nextChanParams->LastAggrTx ) ) + { + // Reset Aggregated time off + *aggregatedTimeOff = 0; + + // Update bands Time OFF + nextTxDelay = RegionCommonUpdateBandTimeOff( nextChanParams->Joined, nextChanParams->DutyCycleEnabled, Bands, US915_HYBRID_MAX_NB_BANDS ); + + // Search how many channels are enabled + nbEnabledChannels = CountNbOfEnabledChannels( nextChanParams->Datarate, + ChannelsMaskRemaining, Channels, + Bands, enabledChannels, &delayTx ); + } + else + { + delayTx++; + nextTxDelay = nextChanParams->AggrTimeOff - TimerGetElapsedTime( nextChanParams->LastAggrTx ); + } + + if( nbEnabledChannels > 0 ) + { + // We found a valid channel + *channel = enabledChannels[randr( 0, nbEnabledChannels - 1 )]; + // Disable the channel in the mask + RegionCommonChanDisable( ChannelsMaskRemaining, *channel, US915_HYBRID_MAX_NB_CHANNELS - 8 ); + + *time = 0; + return true; + } + else + { + if( delayTx > 0 ) + { + // Delay transmission due to AggregatedTimeOff or to a band time off + *time = nextTxDelay; + return true; + } + // Datarate not supported by any channel + *time = 0; + return false; + } +} + +LoRaMacStatus_t RegionUS915HybridChannelAdd( ChannelAddParams_t* channelAdd ) +{ + return LORAMAC_STATUS_PARAMETER_INVALID; +} + +bool RegionUS915HybridChannelsRemove( ChannelRemoveParams_t* channelRemove ) +{ + return LORAMAC_STATUS_PARAMETER_INVALID; +} + +void RegionUS915HybridSetContinuousWave( ContinuousWaveParams_t* continuousWave ) +{ + int8_t txPowerLimited = LimitTxPower( continuousWave->TxPower, Bands[Channels[continuousWave->Channel].Band].TxMaxPower, continuousWave->Datarate, ChannelsMask ); + int8_t phyTxPower = 0; + uint32_t frequency = Channels[continuousWave->Channel].Frequency; + + // Calculate physical TX power + phyTxPower = RegionCommonComputeTxPower( txPowerLimited, US915_HYBRID_DEFAULT_MAX_ERP, 0 ); + + Radio.SetTxContinuousWave( frequency, phyTxPower, continuousWave->Timeout ); +} + +uint8_t RegionUS915HybridApplyDrOffset( uint8_t downlinkDwellTime, int8_t dr, int8_t drOffset ) +{ + int8_t datarate = DatarateOffsetsUS915_HYBRID[dr][drOffset]; + + if( datarate < 0 ) + { + datarate = DR_0; + } + return datarate; +} diff --git a/src/mac/region/RegionUS915-Hybrid.h b/src/mac/region/RegionUS915-Hybrid.h new file mode 100755 index 0000000..15ac467 --- /dev/null +++ b/src/mac/region/RegionUS915-Hybrid.h @@ -0,0 +1,448 @@ +/*! + * \file RegionUS915Hybrid-Hybrid.h + * + * \brief Region definition for US915 + * + * \copyright Revised BSD License, see section \ref LICENSE. + * + * \code + * ______ _ + * / _____) _ | | + * ( (____ _____ ____ _| |_ _____ ____| |__ + * \____ \| ___ | (_ _) ___ |/ ___) _ \ + * _____) ) ____| | | || |_| ____( (___| | | | + * (______/|_____)_|_|_| \__)_____)\____)_| |_| + * (C)2013 Semtech + * + * ___ _____ _ ___ _ _____ ___ ___ ___ ___ + * / __|_ _/_\ / __| |/ / __/ _ \| _ \/ __| __| + * \__ \ | |/ _ \ (__| ' <| _| (_) | / (__| _| + * |___/ |_/_/ \_\___|_|\_\_| \___/|_|_\\___|___| + * embedded.connectivity.solutions=============== + * + * \endcode + * + * \author Miguel Luis ( Semtech ) + * + * \author Gregory Cristian ( Semtech ) + * + * \author Daniel Jaeckle ( STACKFORCE ) + * + * \defgroup REGIONUS915HYB Region US915 in hybrid mode + * This is a hybrid implementation for US915, supporting 16 uplink channels only. + * \{ + */ +#ifndef __REGION_US915_HYBRID_H__ +#define __REGION_US915_HYBRID_H__ + +/*! + * LoRaMac maximum number of channels + */ +#define US915_HYBRID_MAX_NB_CHANNELS 72 + +/*! + * Minimal datarate that can be used by the node + */ +#define US915_HYBRID_TX_MIN_DATARATE DR_0 + +/*! + * Maximal datarate that can be used by the node + */ +#define US915_HYBRID_TX_MAX_DATARATE DR_4 + +/*! + * Minimal datarate that can be used by the node + */ +#define US915_HYBRID_RX_MIN_DATARATE DR_8 + +/*! + * Maximal datarate that can be used by the node + */ +#define US915_HYBRID_RX_MAX_DATARATE DR_13 + +/*! + * Default datarate used by the node + */ +#define US915_HYBRID_DEFAULT_DATARATE DR_0 + +/*! + * Minimal Rx1 receive datarate offset + */ +#define US915_HYBRID_MIN_RX1_DR_OFFSET 0 + +/*! + * Maximal Rx1 receive datarate offset + */ +#define US915_HYBRID_MAX_RX1_DR_OFFSET 3 + +/*! + * Default Rx1 receive datarate offset + */ +#define US915_HYBRID_DEFAULT_RX1_DR_OFFSET 0 + +/*! + * Minimal Tx output power that can be used by the node + */ +#define US915_HYBRID_MIN_TX_POWER TX_POWER_10 + +/*! + * Maximal Tx output power that can be used by the node + */ +#define US915_HYBRID_MAX_TX_POWER TX_POWER_0 + +/*! + * Default Tx output power used by the node + */ +#define US915_HYBRID_DEFAULT_TX_POWER TX_POWER_0 + +/*! + * Default Max ERP + */ +#define US915_HYBRID_DEFAULT_MAX_ERP 30.0f + +/*! + * ADR Ack limit + */ +#define US915_HYBRID_ADR_ACK_LIMIT 64 + +/*! + * ADR Ack delay + */ +#define US915_HYBRID_ADR_ACK_DELAY 32 + +/*! + * Enabled or disabled the duty cycle + */ +#define US915_HYBRID_DUTY_CYCLE_ENABLED 0 + +/*! + * Maximum RX window duration + */ +#define US915_HYBRID_MAX_RX_WINDOW 3000 + +/*! + * Receive delay 1 + */ +#define US915_HYBRID_RECEIVE_DELAY1 1000 + +/*! + * Receive delay 2 + */ +#define US915_HYBRID_RECEIVE_DELAY2 2000 + +/*! + * Join accept delay 1 + */ +#define US915_HYBRID_JOIN_ACCEPT_DELAY1 5000 + +/*! + * Join accept delay 2 + */ +#define US915_HYBRID_JOIN_ACCEPT_DELAY2 6000 + +/*! + * Maximum frame counter gap + */ +#define US915_HYBRID_MAX_FCNT_GAP 16384 + +/*! + * Ack timeout + */ +#define US915_HYBRID_ACKTIMEOUT 2000 + +/*! + * Random ack timeout limits + */ +#define US915_HYBRID_ACK_TIMEOUT_RND 1000 + +/*! + * Second reception window channel frequency definition. + */ +#define US915_HYBRID_RX_WND_2_FREQ 923300000 + +/*! + * Second reception window channel datarate definition. + */ +#define US915_HYBRID_RX_WND_2_DR DR_8 + +/*! + * LoRaMac maximum number of bands + */ +#define US915_HYBRID_MAX_NB_BANDS 1 + +/*! + * Band 0 definition + * { DutyCycle, TxMaxPower, LastTxDoneTime, TimeOff } + */ +#define US915_HYBRID_BAND0 { 1, US915_HYBRID_MAX_TX_POWER, 0, 0 } // 100.0 % + +/*! + * Defines the first channel for RX window 1 for US band + */ +#define US915_HYBRID_FIRST_RX1_CHANNEL ( (uint32_t) 923300000 ) + +/*! + * Defines the last channel for RX window 1 for US band + */ +#define US915_HYBRID_LAST_RX1_CHANNEL ( (uint32_t) 927500000 ) + +/*! + * Defines the step width of the channels for RX window 1 + */ +#define US915_HYBRID_STEPWIDTH_RX1_CHANNEL ( (uint32_t) 600000 ) + +/*! + * Data rates table definition + */ +static const uint8_t DataratesUS915_HYBRID[] = { 10, 9, 8, 7, 8, 0, 0, 0, 12, 11, 10, 9, 8, 7, 0, 0 }; + +/*! + * Bandwidths table definition in Hz + */ +static const uint32_t BandwidthsUS915_HYBRID[] = { 125000, 125000, 125000, 125000, 500000, 0, 0, 0, 500000, 500000, 500000, 500000, 500000, 500000, 0, 0 }; + +/*! + * Up/Down link data rates offset definition + */ +static const int8_t DatarateOffsetsUS915_HYBRID[5][4] = +{ + { DR_10, DR_9 , DR_8 , DR_8 }, // DR_0 + { DR_11, DR_10, DR_9 , DR_8 }, // DR_1 + { DR_12, DR_11, DR_10, DR_9 }, // DR_2 + { DR_13, DR_12, DR_11, DR_10 }, // DR_3 + { DR_13, DR_13, DR_12, DR_11 }, // DR_4 +}; + +/*! + * Maximum payload with respect to the datarate index. Cannot operate with repeater. + */ +static const uint8_t MaxPayloadOfDatarateUS915_HYBRID[] = { 11, 53, 125, 242, 242, 0, 0, 0, 53, 129, 242, 242, 242, 242, 0, 0 }; + +/*! + * Maximum payload with respect to the datarate index. Can operate with repeater. + */ +static const uint8_t MaxPayloadOfDatarateRepeaterUS915_HYBRID[] = { 11, 53, 125, 242, 242, 0, 0, 0, 33, 109, 222, 222, 222, 222, 0, 0 }; + +/*! + * \brief The function gets a value of a specific phy attribute. + * + * \param [IN] getPhy Pointer to the function parameters. + * + * \retval Returns a structure containing the PHY parameter. + */ +PhyParam_t RegionUS915HybridGetPhyParam( GetPhyParams_t* getPhy ); + +/*! + * \brief Updates the last TX done parameters of the current channel. + * + * \param [IN] txDone Pointer to the function parameters. + */ +void RegionUS915HybridSetBandTxDone( SetBandTxDoneParams_t* txDone ); + +/*! + * \brief Initializes the channels masks and the channels. + * + * \param [IN] type Sets the initialization type. + */ +void RegionUS915HybridInitDefaults( InitType_t type ); + +/*! + * \brief Verifies a parameter. + * + * \param [IN] verify Pointer to the function parameters. + * + * \param [IN] type Sets the initialization type. + * + * \retval Returns true, if the parameter is valid. + */ +bool RegionUS915HybridVerify( VerifyParams_t* verify, PhyAttribute_t phyAttribute ); + +/*! + * \brief The function parses the input buffer and sets up the channels of the + * CF list. + * + * \param [IN] applyCFList Pointer to the function parameters. + */ +void RegionUS915HybridApplyCFList( ApplyCFListParams_t* applyCFList ); + +/*! + * \brief Sets a channels mask. + * + * \param [IN] chanMaskSet Pointer to the function parameters. + * + * \retval Returns true, if the channels mask could be set. + */ +bool RegionUS915HybridChanMaskSet( ChanMaskSetParams_t* chanMaskSet ); + +/*! + * \brief Calculates the next datarate to set, when ADR is on or off. + * + * \param [IN] adrNext Pointer to the function parameters. + * + * \param [OUT] drOut The calculated datarate for the next TX. + * + * \param [OUT] txPowOut The TX power for the next TX. + * + * \param [OUT] adrAckCounter The calculated ADR acknowledgement counter. + * + * \retval Returns true, if an ADR request should be performed. + */ +bool RegionUS915HybridAdrNext( AdrNextParams_t* adrNext, int8_t* drOut, int8_t* txPowOut, uint32_t* adrAckCounter ); + +/*! + * Computes the Rx window timeout and offset. + * + * \param [IN] datarate Rx window datarate index to be used + * + * \param [IN] minRxSymbols Minimum required number of symbols to detect an Rx frame. + * + * \param [IN] rxError System maximum timing error of the receiver. In milliseconds + * The receiver will turn on in a [-rxError : +rxError] ms + * interval around RxOffset + * + * \param [OUT]rxConfigParams Returns updated WindowTimeout and WindowOffset fields. + */ +void RegionUS915HybridComputeRxWindowParameters( int8_t datarate, uint8_t minRxSymbols, uint32_t rxError, RxConfigParams_t *rxConfigParams ); + +/*! + * \brief Configuration of the RX windows. + * + * \param [IN] rxConfig Pointer to the function parameters. + * + * \param [OUT] datarate The datarate index which was set. + * + * \retval Returns true, if the configuration was applied successfully. + */ +bool RegionUS915HybridRxConfig( RxConfigParams_t* rxConfig, int8_t* datarate ); + +/*! + * \brief TX configuration. + * + * \param [IN] txConfig Pointer to the function parameters. + * + * \param [OUT] txPower The tx power index which was set. + * + * \param [OUT] txTimeOnAir The time-on-air of the frame. + * + * \retval Returns true, if the configuration was applied successfully. + */ +bool RegionUS915HybridTxConfig( TxConfigParams_t* txConfig, int8_t* txPower, TimerTime_t* txTimeOnAir ); + +/*! + * \brief The function processes a Link ADR Request. + * + * \param [IN] linkAdrReq Pointer to the function parameters. + * + * \retval Returns the status of the operation, according to the LoRaMAC specification. + */ +uint8_t RegionUS915HybridLinkAdrReq( LinkAdrReqParams_t* linkAdrReq, int8_t* drOut, int8_t* txPowOut, uint8_t* nbRepOut, uint8_t* nbBytesParsed ); + +/*! + * \brief The function processes a RX Parameter Setup Request. + * + * \param [IN] rxParamSetupReq Pointer to the function parameters. + * + * \retval Returns the status of the operation, according to the LoRaMAC specification. + */ +uint8_t RegionUS915HybridRxParamSetupReq( RxParamSetupReqParams_t* rxParamSetupReq ); + +/*! + * \brief The function processes a Channel Request. + * + * \param [IN] newChannelReq Pointer to the function parameters. + * + * \retval Returns the status of the operation, according to the LoRaMAC specification. + */ +uint8_t RegionUS915HybridNewChannelReq( NewChannelReqParams_t* newChannelReq ); + +/*! + * \brief The function processes a TX ParamSetup Request. + * + * \param [IN] txParamSetupReq Pointer to the function parameters. + * + * \retval Returns the status of the operation, according to the LoRaMAC specification. + * Returns -1, if the functionality is not implemented. In this case, the end node + * shall not process the command. + */ +int8_t RegionUS915HybridTxParamSetupReq( TxParamSetupReqParams_t* txParamSetupReq ); + +/*! + * \brief The function processes a DlChannel Request. + * + * \param [IN] dlChannelReq Pointer to the function parameters. + * + * \retval Returns the status of the operation, according to the LoRaMAC specification. + */ +uint8_t RegionUS915HybridDlChannelReq( DlChannelReqParams_t* dlChannelReq ); + +/*! + * \brief Alternates the datarate of the channel for the join request. + * + * \param [IN] alternateDr Pointer to the function parameters. + * + * \retval Datarate to apply. + */ +int8_t RegionUS915HybridAlternateDr( AlternateDrParams_t* alternateDr ); + +/*! + * \brief Calculates the back-off time. + * + * \param [IN] calcBackOff Pointer to the function parameters. + */ +void RegionUS915HybridCalcBackOff( CalcBackOffParams_t* calcBackOff ); + +/*! + * \brief Searches and set the next random available channel + * + * \param [OUT] channel Next channel to use for TX. + * + * \param [OUT] time Time to wait for the next transmission according to the duty + * cycle. + * + * \param [OUT] aggregatedTimeOff Updates the aggregated time off. + * + * \retval Function status [1: OK, 0: Unable to find a channel on the current datarate] + */ +bool RegionUS915HybridNextChannel( NextChanParams_t* nextChanParams, uint8_t* channel, TimerTime_t* time, TimerTime_t* aggregatedTimeOff ); + +/*! + * \brief Adds a channel. + * + * \param [IN] channelAdd Pointer to the function parameters. + * + * \retval Status of the operation. + */ +LoRaMacStatus_t RegionUS915HybridChannelAdd( ChannelAddParams_t* channelAdd ); + +/*! + * \brief Removes a channel. + * + * \param [IN] channelRemove Pointer to the function parameters. + * + * \retval Returns true, if the channel was removed successfully. + */ +bool RegionUS915HybridChannelsRemove( ChannelRemoveParams_t* channelRemove ); + +/*! + * \brief Sets the radio into continuous wave mode. + * + * \param [IN] continuousWave Pointer to the function parameters. + */ +void RegionUS915HybridSetContinuousWave( ContinuousWaveParams_t* continuousWave ); + +/*! + * \brief Computes new datarate according to the given offset + * + * \param [IN] downlinkDwellTime Downlink dwell time configuration. 0: No limit, 1: 400ms + * + * \param [IN] dr Current datarate + * + * \param [IN] drOffset Offset to be applied + * + * \retval newDr Computed datarate. + */ +uint8_t RegionUS915HybridApplyDrOffset( uint8_t downlinkDwellTime, int8_t dr, int8_t drOffset ); + +/*! \} defgroup REGIONUS915HYB */ + +#endif // __REGION_US915_HYBRID_H__ diff --git a/src/mac/region/RegionUS915.c b/src/mac/region/RegionUS915.c new file mode 100755 index 0000000..6dc218f --- /dev/null +++ b/src/mac/region/RegionUS915.c @@ -0,0 +1,870 @@ +/* + / _____) _ | | +( (____ _____ ____ _| |_ _____ ____| |__ + \____ \| ___ | (_ _) ___ |/ ___) _ \ + _____) ) ____| | | || |_| ____( (___| | | | +(______/|_____)_|_|_| \__)_____)\____)_| |_| + (C)2013 Semtech + ___ _____ _ ___ _ _____ ___ ___ ___ ___ +/ __|_ _/_\ / __| |/ / __/ _ \| _ \/ __| __| +\__ \ | |/ _ \ (__| ' <| _| (_) | / (__| _| +|___/ |_/_/ \_\___|_|\_\_| \___/|_|_\\___|___| +embedded.connectivity.solutions=============== + +Description: LoRa MAC region US915 implementation + +License: Revised BSD License, see LICENSE.TXT file include in the project + +Maintainer: Miguel Luis ( Semtech ), Gregory Cristian ( Semtech ) and Daniel Jaeckle ( STACKFORCE ) +*/ +#include +#include +#include +#include + +#include "board.h" +#include "LoRaMac.h" + +#include "utilities.h" + +#include "Region.h" +#include "RegionCommon.h" +#include "RegionUS915.h" + +// Definitions +#define CHANNELS_MASK_SIZE 6 + +// Global attributes +/*! + * LoRaMAC channels + */ +static ChannelParams_t Channels[US915_MAX_NB_CHANNELS]; + +/*! + * LoRaMac bands + */ +static Band_t Bands[US915_MAX_NB_BANDS] = +{ + US915_BAND0 +}; + +/*! + * LoRaMac channels mask + */ +static uint16_t ChannelsMask[CHANNELS_MASK_SIZE]; + +/*! + * LoRaMac channels remaining + */ +static uint16_t ChannelsMaskRemaining[CHANNELS_MASK_SIZE]; + +/*! + * LoRaMac channels default mask + */ +static uint16_t ChannelsDefaultMask[CHANNELS_MASK_SIZE]; + +// Static functions +static int8_t GetNextLowerTxDr( int8_t dr, int8_t minDr ) +{ + uint8_t nextLowerDr = 0; + + if( dr == minDr ) + { + nextLowerDr = minDr; + } + else + { + nextLowerDr = dr - 1; + } + return nextLowerDr; +} + +static uint32_t GetBandwidth( uint32_t drIndex ) +{ + switch( BandwidthsUS915[drIndex] ) + { + default: + case 125000: + return 0; + case 250000: + return 1; + case 500000: + return 2; + } +} + +static int8_t LimitTxPower( int8_t txPower, int8_t maxBandTxPower, int8_t datarate, uint16_t* channelsMask ) +{ + int8_t txPowerResult = txPower; + + // Limit tx power to the band max + txPowerResult = MAX( txPower, maxBandTxPower ); + + if( datarate == DR_4 ) + {// Limit tx power to max 26dBm + txPowerResult = MAX( txPower, TX_POWER_2 ); + } + else + { + if( RegionCommonCountChannels( channelsMask, 0, 4 ) < 50 ) + {// Limit tx power to max 21dBm + txPowerResult = MAX( txPower, TX_POWER_5 ); + } + } + return txPowerResult; +} + +static uint8_t CountNbOfEnabledChannels( uint8_t datarate, uint16_t* channelsMask, ChannelParams_t* channels, Band_t* bands, uint8_t* enabledChannels, uint8_t* delayTx ) +{ + uint8_t nbEnabledChannels = 0; + uint8_t delayTransmission = 0; + + for( uint8_t i = 0, k = 0; i < US915_MAX_NB_CHANNELS; i += 16, k++ ) + { + for( uint8_t j = 0; j < 16; j++ ) + { + if( ( channelsMask[k] & ( 1 << j ) ) != 0 ) + { + if( channels[i + j].Frequency == 0 ) + { // Check if the channel is enabled + continue; + } + if( RegionCommonValueInRange( datarate, channels[i + j].DrRange.Fields.Min, + channels[i + j].DrRange.Fields.Max ) == false ) + { // Check if the current channel selection supports the given datarate + continue; + } + if( bands[channels[i + j].Band].TimeOff > 0 ) + { // Check if the band is available for transmission + delayTransmission++; + continue; + } + DPRINTF("enabledChannels[%i]=%d\r\n", nbEnabledChannels, i + j); + enabledChannels[nbEnabledChannels++] = i + j; + } + } + } + + *delayTx = delayTransmission; + return nbEnabledChannels; +} + +PhyParam_t RegionUS915GetPhyParam( GetPhyParams_t* getPhy ) +{ + PhyParam_t phyParam = { 0 }; + + switch( getPhy->Attribute ) + { + case PHY_MIN_RX_DR: + { + phyParam.Value = US915_RX_MIN_DATARATE; + break; + } + case PHY_MIN_TX_DR: + { + phyParam.Value = US915_TX_MIN_DATARATE; + break; + } + case PHY_DEF_TX_DR: + { + phyParam.Value = US915_DEFAULT_DATARATE; + break; + } + case PHY_NEXT_LOWER_TX_DR: + { + phyParam.Value = GetNextLowerTxDr( getPhy->Datarate, US915_TX_MIN_DATARATE ); + break; + } + case PHY_DEF_TX_POWER: + { + phyParam.Value = US915_DEFAULT_TX_POWER; + break; + } + case PHY_MAX_PAYLOAD: + { + phyParam.Value = MaxPayloadOfDatarateUS915[getPhy->Datarate]; + break; + } + case PHY_MAX_PAYLOAD_REPEATER: + { + phyParam.Value = MaxPayloadOfDatarateRepeaterUS915[getPhy->Datarate]; + break; + } + case PHY_DUTY_CYCLE: + { + phyParam.Value = US915_DUTY_CYCLE_ENABLED; + break; + } + case PHY_MAX_RX_WINDOW: + { + phyParam.Value = US915_MAX_RX_WINDOW; + break; + } + case PHY_RECEIVE_DELAY1: + { + phyParam.Value = US915_RECEIVE_DELAY1; + break; + } + case PHY_RECEIVE_DELAY2: + { + phyParam.Value = US915_RECEIVE_DELAY2; + break; + } + case PHY_JOIN_ACCEPT_DELAY1: + { + phyParam.Value = US915_JOIN_ACCEPT_DELAY1; + break; + } + case PHY_JOIN_ACCEPT_DELAY2: + { + phyParam.Value = US915_JOIN_ACCEPT_DELAY2; + break; + } + case PHY_MAX_FCNT_GAP: + { + phyParam.Value = US915_MAX_FCNT_GAP; + break; + } + case PHY_ACK_TIMEOUT: + { + phyParam.Value = ( US915_ACKTIMEOUT + randr( -US915_ACK_TIMEOUT_RND, US915_ACK_TIMEOUT_RND ) ); + break; + } + case PHY_DEF_DR1_OFFSET: + { + phyParam.Value = US915_DEFAULT_RX1_DR_OFFSET; + break; + } + case PHY_DEF_RX2_FREQUENCY: + { + phyParam.Value = US915_RX_WND_2_FREQ; + break; + } + case PHY_DEF_RX2_DR: + { + phyParam.Value = US915_RX_WND_2_DR; + break; + } + case PHY_CHANNELS_MASK: + { + phyParam.ChannelsMask = ChannelsMask; + break; + } + case PHY_CHANNELS_DEFAULT_MASK: + { + phyParam.ChannelsMask = ChannelsDefaultMask; + break; + } + case PHY_MAX_NB_CHANNELS: + { + phyParam.Value = US915_MAX_NB_CHANNELS; + break; + } + case PHY_CHANNELS: + { + phyParam.Channels = Channels; + break; + } + case PHY_DEF_UPLINK_DWELL_TIME: + case PHY_DEF_DOWNLINK_DWELL_TIME: + { + phyParam.Value = 0; + break; + } + case PHY_DEF_MAX_EIRP: + case PHY_DEF_ANTENNA_GAIN: + { + phyParam.fValue = 0; + break; + } + case PHY_NB_JOIN_TRIALS: + case PHY_DEF_NB_JOIN_TRIALS: + { + phyParam.Value = 2; + break; + } + default: + { + break; + } + } + + return phyParam; +} + +void RegionUS915SetBandTxDone( SetBandTxDoneParams_t* txDone ) +{ + RegionCommonSetBandTxDone( txDone->Joined, &Bands[Channels[txDone->Channel].Band], txDone->LastTxDoneTime ); +} + +void RegionUS915InitDefaults( InitType_t type ) +{ + switch( type ) + { + case INIT_TYPE_INIT: + { + // Channels + // 125 kHz channels + for( uint8_t i = 0; i < US915_MAX_NB_CHANNELS - 8; i++ ) + { + Channels[i].Frequency = 902300000 + i * 200000; + Channels[i].DrRange.Value = ( DR_3 << 4 ) | DR_0; + Channels[i].Band = 0; + } + // 500 kHz channels + for( uint8_t i = US915_MAX_NB_CHANNELS - 8; i < US915_MAX_NB_CHANNELS; i++ ) + { + Channels[i].Frequency = 903000000 + ( i - ( US915_MAX_NB_CHANNELS - 8 ) ) * 1600000; + Channels[i].DrRange.Value = ( DR_4 << 4 ) | DR_4; + Channels[i].Band = 0; + } + + // ChannelsMask + ChannelsDefaultMask[0] = 0xFFFF; + ChannelsDefaultMask[1] = 0xFFFF; + ChannelsDefaultMask[2] = 0xFFFF; + ChannelsDefaultMask[3] = 0xFFFF; + ChannelsDefaultMask[4] = 0x00FF; + ChannelsDefaultMask[5] = 0x0000; + + // Copy channels default mask + RegionCommonChanMaskCopy( ChannelsMask, ChannelsDefaultMask, 6 ); + + // Copy into channels mask remaining + RegionCommonChanMaskCopy( ChannelsMaskRemaining, ChannelsMask, 6 ); + break; + } + case INIT_TYPE_RESTORE: + { + // Copy channels default mask + RegionCommonChanMaskCopy( ChannelsMask, ChannelsDefaultMask, 6 ); + + for( uint8_t i = 0; i < 6; i++ ) + { // Copy-And the channels mask + ChannelsMaskRemaining[i] &= ChannelsMask[i]; + } + break; + } + default: + { + break; + } + } +} + +bool RegionUS915Verify( VerifyParams_t* verify, PhyAttribute_t phyAttribute ) +{ + switch( phyAttribute ) + { + case PHY_TX_DR: + { + return RegionCommonValueInRange( verify->DatarateParams.Datarate, US915_TX_MIN_DATARATE, US915_TX_MAX_DATARATE ); + } + case PHY_DEF_TX_DR: + { + return RegionCommonValueInRange( verify->DatarateParams.Datarate, DR_0, DR_5 ); + } + case PHY_RX_DR: + { + return RegionCommonValueInRange( verify->DatarateParams.Datarate, US915_RX_MIN_DATARATE, US915_RX_MAX_DATARATE ); + } + case PHY_DEF_TX_POWER: + case PHY_TX_POWER: + { + // Remark: switched min and max! + return RegionCommonValueInRange( verify->TxPower, US915_MAX_TX_POWER, US915_MIN_TX_POWER ); + } + case PHY_DUTY_CYCLE: + { + return US915_DUTY_CYCLE_ENABLED; + } + case PHY_NB_JOIN_TRIALS: + { + if( verify->NbJoinTrials < 2 ) + { + return false; + } + break; + } + default: + return false; + } + return true; +} + +void RegionUS915ApplyCFList( ApplyCFListParams_t* applyCFList ) +{ + return; +} + +bool RegionUS915ChanMaskSet( ChanMaskSetParams_t* chanMaskSet ) +{ + uint8_t nbChannels = RegionCommonCountChannels( chanMaskSet->ChannelsMaskIn, 0, 4 ); + + // Check the number of active channels + if( ( nbChannels < 2 ) && + ( nbChannels > 0 ) ) + { + return false; + } + + switch( chanMaskSet->ChannelsMaskType ) + { + case CHANNELS_MASK: + { + RegionCommonChanMaskCopy( ChannelsMask, chanMaskSet->ChannelsMaskIn, 6 ); + + for( uint8_t i = 0; i < 6; i++ ) + { // Copy-And the channels mask + ChannelsMaskRemaining[i] &= ChannelsMask[i]; + } + break; + } + case CHANNELS_DEFAULT_MASK: + { + RegionCommonChanMaskCopy( ChannelsDefaultMask, chanMaskSet->ChannelsMaskIn, 6 ); + break; + } + default: + return false; + } + return true; +} + +bool RegionUS915AdrNext( AdrNextParams_t* adrNext, int8_t* drOut, int8_t* txPowOut, uint32_t* adrAckCounter ) +{ + bool adrAckReq = false; + int8_t datarate = adrNext->Datarate; + int8_t txPower = adrNext->TxPower; + GetPhyParams_t getPhy; + PhyParam_t phyParam; + + // Report back the adr ack counter + *adrAckCounter = adrNext->AdrAckCounter; + + if( adrNext->AdrEnabled == true ) + { + if( datarate == US915_TX_MIN_DATARATE ) + { + *adrAckCounter = 0; + adrAckReq = false; + } + else + { + if( adrNext->AdrAckCounter >= US915_ADR_ACK_LIMIT ) + { + adrAckReq = true; + txPower = US915_MAX_TX_POWER; + } + else + { + adrAckReq = false; + } + if( adrNext->AdrAckCounter >= ( US915_ADR_ACK_LIMIT + US915_ADR_ACK_DELAY ) ) + { + if( ( adrNext->AdrAckCounter % US915_ADR_ACK_DELAY ) == 1 ) + { + // Decrease the datarate + getPhy.Attribute = PHY_NEXT_LOWER_TX_DR; + getPhy.Datarate = datarate; + getPhy.UplinkDwellTime = adrNext->UplinkDwellTime; + phyParam = RegionUS915GetPhyParam( &getPhy ); + datarate = phyParam.Value; + + if( datarate == US915_TX_MIN_DATARATE ) + { + // We must set adrAckReq to false as soon as we reach the lowest datarate + adrAckReq = false; + if( adrNext->UpdateChanMask == true ) + { + // Re-enable default channels + ChannelsMask[0] = 0xFFFF; + ChannelsMask[1] = 0xFFFF; + ChannelsMask[2] = 0xFFFF; + ChannelsMask[3] = 0xFFFF; + ChannelsMask[4] = 0x00FF; + ChannelsMask[5] = 0x0000; + } + } + } + } + } + } + + *drOut = datarate; + *txPowOut = txPower; + return adrAckReq; +} + +void RegionUS915ComputeRxWindowParameters( int8_t datarate, uint8_t minRxSymbols, uint32_t rxError, RxConfigParams_t *rxConfigParams ) +{ + double tSymbol = 0.0; + + // Get the datarate, perform a boundary check + rxConfigParams->Datarate = MIN( datarate, US915_RX_MAX_DATARATE ); + rxConfigParams->Bandwidth = GetBandwidth( rxConfigParams->Datarate ); + + tSymbol = RegionCommonComputeSymbolTimeLoRa( DataratesUS915[rxConfigParams->Datarate], BandwidthsUS915[rxConfigParams->Datarate] ); + + RegionCommonComputeRxWindowParameters( tSymbol, minRxSymbols, rxError, RADIO_WAKEUP_TIME, &rxConfigParams->WindowTimeout, &rxConfigParams->WindowOffset ); +} + +bool RegionUS915RxConfig( RxConfigParams_t* rxConfig, int8_t* datarate ) +{ + int8_t dr = rxConfig->Datarate; + uint8_t maxPayload = 0; + int8_t phyDr = 0; + uint32_t frequency = rxConfig->Frequency; + + if( Radio.GetStatus( ) != RF_IDLE ) + { + return false; + } + + if( rxConfig->Window == 0 ) + { + // Apply window 1 frequency + frequency = US915_FIRST_RX1_CHANNEL + ( rxConfig->Channel % 8 ) * US915_STEPWIDTH_RX1_CHANNEL; + // Add junhua ,return the selected frequency + rxConfig->Frequency = frequency; + } + + // Read the physical datarate from the datarates table + phyDr = DataratesUS915[dr]; + + Radio.SetChannel( frequency ); + + // Radio configuration + Radio.SetRxConfig( MODEM_LORA, rxConfig->Bandwidth, phyDr, 1, 0, 8, rxConfig->WindowTimeout, false, 0, false, 0, 0, true, rxConfig->RxContinuous ); + + if( rxConfig->RepeaterSupport == true ) + { + maxPayload = MaxPayloadOfDatarateRepeaterUS915[dr]; + } + else + { + maxPayload = MaxPayloadOfDatarateUS915[dr]; + } + Radio.SetMaxPayloadLength( MODEM_LORA, maxPayload + LORA_MAC_FRMPAYLOAD_OVERHEAD ); + + *datarate = (uint8_t) dr; + return true; +} + +bool RegionUS915TxConfig( TxConfigParams_t* txConfig, int8_t* txPower, TimerTime_t* txTimeOnAir ) +{ + int8_t phyDr = DataratesUS915[txConfig->Datarate]; + int8_t txPowerLimited = LimitTxPower( txConfig->TxPower, Bands[Channels[txConfig->Channel].Band].TxMaxPower, txConfig->Datarate, ChannelsMask ); + uint32_t bandwidth = GetBandwidth( txConfig->Datarate ); + int8_t phyTxPower = 0; + + // Calculate physical TX power + phyTxPower = RegionCommonComputeTxPower( txPowerLimited, US915_DEFAULT_MAX_ERP, 0 ); + + // Setup the radio frequency + Radio.SetChannel( Channels[txConfig->Channel].Frequency ); + + Radio.SetTxConfig( MODEM_LORA, phyTxPower, 0, bandwidth, phyDr, 1, 8, false, true, 0, 0, false, 3000 ); + + // Setup maximum payload lenght of the radio driver + Radio.SetMaxPayloadLength( MODEM_LORA, txConfig->PktLen ); + // Get the time-on-air of the next tx frame + *txTimeOnAir = Radio.TimeOnAir( MODEM_LORA, txConfig->PktLen ); + *txPower = txPowerLimited; + + DPRINTF("\r\nFreq=%d, txP=%d dbm, SF%d ,tm=%d\r\n", Channels[txConfig->Channel].Frequency, phyTxPower, phyDr, *txTimeOnAir); + + return true; +} + +uint8_t RegionUS915LinkAdrReq( LinkAdrReqParams_t* linkAdrReq, int8_t* drOut, int8_t* txPowOut, uint8_t* nbRepOut, uint8_t* nbBytesParsed ) +{ + uint8_t status = 0x07; + RegionCommonLinkAdrParams_t linkAdrParams; + uint8_t nextIndex = 0; + uint8_t bytesProcessed = 0; + uint16_t channelsMask[6] = { 0, 0, 0, 0, 0, 0 }; + GetPhyParams_t getPhy; + PhyParam_t phyParam; + RegionCommonLinkAdrReqVerifyParams_t linkAdrVerifyParams; + + // Initialize local copy of channels mask + RegionCommonChanMaskCopy( channelsMask, ChannelsMask, 6 ); + + while( bytesProcessed < linkAdrReq->PayloadSize ) + { + nextIndex = RegionCommonParseLinkAdrReq( &( linkAdrReq->Payload[bytesProcessed] ), &linkAdrParams ); + + if( nextIndex == 0 ) + break; // break loop, since no more request has been found + + // Update bytes processed + bytesProcessed += nextIndex; + + // Revert status, as we only check the last ADR request for the channel mask KO + status = 0x07; + + if( linkAdrParams.ChMaskCtrl == 6 ) + { + // Enable all 125 kHz channels + channelsMask[0] = 0xFFFF; + channelsMask[1] = 0xFFFF; + channelsMask[2] = 0xFFFF; + channelsMask[3] = 0xFFFF; + // Apply chMask to channels 64 to 71 + channelsMask[4] = linkAdrParams.ChMask; + } + else if( linkAdrParams.ChMaskCtrl == 7 ) + { + // Disable all 125 kHz channels + channelsMask[0] = 0x0000; + channelsMask[1] = 0x0000; + channelsMask[2] = 0x0000; + channelsMask[3] = 0x0000; + // Apply chMask to channels 64 to 71 + channelsMask[4] = linkAdrParams.ChMask; + } + else if( linkAdrParams.ChMaskCtrl == 5 ) + { + // RFU + status &= 0xFE; // Channel mask KO + } + else + { + channelsMask[linkAdrParams.ChMaskCtrl] = linkAdrParams.ChMask; + } + } + + // FCC 15.247 paragraph F mandates to hop on at least 2 125 kHz channels + if( ( linkAdrParams.Datarate < DR_4 ) && ( RegionCommonCountChannels( channelsMask, 0, 4 ) < 2 ) ) + { + status &= 0xFE; // Channel mask KO + } + + // Get the minimum possible datarate + getPhy.Attribute = PHY_MIN_TX_DR; + getPhy.UplinkDwellTime = linkAdrReq->UplinkDwellTime; + phyParam = RegionUS915GetPhyParam( &getPhy ); + + linkAdrVerifyParams.Status = status; + linkAdrVerifyParams.AdrEnabled = linkAdrReq->AdrEnabled; + linkAdrVerifyParams.Datarate = linkAdrParams.Datarate; + linkAdrVerifyParams.TxPower = linkAdrParams.TxPower; + linkAdrVerifyParams.NbRep = linkAdrParams.NbRep; + linkAdrVerifyParams.CurrentDatarate = linkAdrReq->CurrentDatarate; + linkAdrVerifyParams.CurrentTxPower = linkAdrReq->CurrentTxPower; + linkAdrVerifyParams.CurrentNbRep = linkAdrReq->CurrentNbRep; + linkAdrVerifyParams.NbChannels = US915_MAX_NB_CHANNELS; + linkAdrVerifyParams.ChannelsMask = channelsMask; + linkAdrVerifyParams.MinDatarate = ( int8_t )phyParam.Value; + linkAdrVerifyParams.MaxDatarate = US915_TX_MAX_DATARATE; + linkAdrVerifyParams.Channels = Channels; + linkAdrVerifyParams.MinTxPower = US915_MIN_TX_POWER; + linkAdrVerifyParams.MaxTxPower = US915_MAX_TX_POWER; + + // Verify the parameters and update, if necessary + status = RegionCommonLinkAdrReqVerifyParams( &linkAdrVerifyParams, &linkAdrParams.Datarate, &linkAdrParams.TxPower, &linkAdrParams.NbRep ); + + // Update channelsMask if everything is correct + if( status == 0x07 ) + { + // Copy Mask + RegionCommonChanMaskCopy( ChannelsMask, channelsMask, 6 ); + + ChannelsMaskRemaining[0] &= ChannelsMask[0]; + ChannelsMaskRemaining[1] &= ChannelsMask[1]; + ChannelsMaskRemaining[2] &= ChannelsMask[2]; + ChannelsMaskRemaining[3] &= ChannelsMask[3]; + ChannelsMaskRemaining[4] = ChannelsMask[4]; + ChannelsMaskRemaining[5] = ChannelsMask[5]; + } + + // Update status variables + *drOut = linkAdrParams.Datarate; + *txPowOut = linkAdrParams.TxPower; + *nbRepOut = linkAdrParams.NbRep; + *nbBytesParsed = bytesProcessed; + + return status; +} + +uint8_t RegionUS915RxParamSetupReq( RxParamSetupReqParams_t* rxParamSetupReq ) +{ + uint8_t status = 0x07; + uint32_t freq = rxParamSetupReq->Frequency; + + // Verify radio frequency + if( ( Radio.CheckRfFrequency( freq ) == false ) || + ( freq < US915_FIRST_RX1_CHANNEL ) || + ( freq > US915_LAST_RX1_CHANNEL ) || + ( ( ( freq - ( uint32_t ) US915_FIRST_RX1_CHANNEL ) % ( uint32_t ) US915_STEPWIDTH_RX1_CHANNEL ) != 0 ) ) + { + status &= 0xFE; // Channel frequency KO + } + + // Verify datarate + if( RegionCommonValueInRange( rxParamSetupReq->Datarate, US915_RX_MIN_DATARATE, US915_RX_MAX_DATARATE ) == false ) + { + status &= 0xFD; // Datarate KO + } + if( ( RegionCommonValueInRange( rxParamSetupReq->Datarate, DR_5, DR_7 ) == true ) || + ( rxParamSetupReq->Datarate > DR_13 ) ) + { + status &= 0xFD; // Datarate KO + } + + // Verify datarate offset + if( RegionCommonValueInRange( rxParamSetupReq->DrOffset, US915_MIN_RX1_DR_OFFSET, US915_MAX_RX1_DR_OFFSET ) == false ) + { + status &= 0xFB; // Rx1DrOffset range KO + } + + return status; +} + +uint8_t RegionUS915NewChannelReq( NewChannelReqParams_t* newChannelReq ) +{ + // Datarate and frequency KO + return 0; +} + +int8_t RegionUS915TxParamSetupReq( TxParamSetupReqParams_t* txParamSetupReq ) +{ + return -1; +} + +uint8_t RegionUS915DlChannelReq( DlChannelReqParams_t* dlChannelReq ) +{ + return 0; +} + +int8_t RegionUS915AlternateDr( AlternateDrParams_t* alternateDr ) +{ + int8_t datarate = 0; + + // Re-enable 500 kHz default channels + //ChannelsMask[4] = 0x00FF; //comment by junhua + + if( ( alternateDr->NbTrials & 0x01 ) == 0x01 ) + { + datarate = DR_4; + } + else + { + datarate = DR_0; + } + return datarate; +} + +void RegionUS915CalcBackOff( CalcBackOffParams_t* calcBackOff ) +{ + RegionCommonCalcBackOffParams_t calcBackOffParams; + + calcBackOffParams.Channels = Channels; + calcBackOffParams.Bands = Bands; + calcBackOffParams.LastTxIsJoinRequest = calcBackOff->LastTxIsJoinRequest; + calcBackOffParams.Joined = calcBackOff->Joined; + calcBackOffParams.DutyCycleEnabled = calcBackOff->DutyCycleEnabled; + calcBackOffParams.Channel = calcBackOff->Channel; + calcBackOffParams.ElapsedTime = calcBackOff->ElapsedTime; + calcBackOffParams.TxTimeOnAir = calcBackOff->TxTimeOnAir; + + RegionCommonCalcBackOff( &calcBackOffParams ); +} + +bool RegionUS915NextChannel( NextChanParams_t* nextChanParams, uint8_t* channel, TimerTime_t* time, TimerTime_t* aggregatedTimeOff ) +{ + uint8_t nbEnabledChannels = 0; + uint8_t delayTx = 0; + uint8_t enabledChannels[US915_MAX_NB_CHANNELS] = { 0 }; + TimerTime_t nextTxDelay = 0; + + // Count 125kHz channels + if( RegionCommonCountChannels( ChannelsMaskRemaining, 0, 4 ) == 0 ) + { // Reactivate default channels + RegionCommonChanMaskCopy( ChannelsMaskRemaining, ChannelsMask, 4 ); + } + // Check other channels + if( nextChanParams->Datarate >= DR_4 ) + { + if( ( ChannelsMaskRemaining[4] & 0x00FF ) == 0 ) + { + ChannelsMaskRemaining[4] = ChannelsMask[4]; + } + } + + if( nextChanParams->AggrTimeOff <= TimerGetElapsedTime( nextChanParams->LastAggrTx ) ) + { + // Reset Aggregated time off + *aggregatedTimeOff = 0; + + // Update bands Time OFF + nextTxDelay = RegionCommonUpdateBandTimeOff( nextChanParams->Joined, nextChanParams->DutyCycleEnabled, Bands, US915_MAX_NB_BANDS ); + + // Search how many channels are enabled + nbEnabledChannels = CountNbOfEnabledChannels( nextChanParams->Datarate, + ChannelsMaskRemaining, Channels, + Bands, enabledChannels, &delayTx ); + } + else + { + delayTx++; + nextTxDelay = nextChanParams->AggrTimeOff - TimerGetElapsedTime( nextChanParams->LastAggrTx ); + } + + if( nbEnabledChannels > 0 ) + { + // We found a valid channel + *channel = enabledChannels[randr( 0, nbEnabledChannels - 1 )]; + // Disable the channel in the mask + RegionCommonChanDisable( ChannelsMaskRemaining, *channel, US915_MAX_NB_CHANNELS - 8 ); + + *time = 0; + return true; + } + else + { + if( delayTx > 0 ) + { + // Delay transmission due to AggregatedTimeOff or to a band time off + *time = nextTxDelay; + return true; + } + // Datarate not supported by any channel + *time = 0; + return false; + } +} + +LoRaMacStatus_t RegionUS915ChannelAdd( ChannelAddParams_t* channelAdd ) +{ + return LORAMAC_STATUS_PARAMETER_INVALID; +} + +bool RegionUS915ChannelsRemove( ChannelRemoveParams_t* channelRemove ) +{ + return LORAMAC_STATUS_PARAMETER_INVALID; +} + +void RegionUS915SetContinuousWave( ContinuousWaveParams_t* continuousWave ) +{ + int8_t txPowerLimited = LimitTxPower( continuousWave->TxPower, Bands[Channels[continuousWave->Channel].Band].TxMaxPower, continuousWave->Datarate, ChannelsMask ); + int8_t phyTxPower = 0; + uint32_t frequency = Channels[continuousWave->Channel].Frequency; + + // Calculate physical TX power + phyTxPower = RegionCommonComputeTxPower( txPowerLimited, US915_DEFAULT_MAX_ERP, 0 ); + + Radio.SetTxContinuousWave( frequency, phyTxPower, continuousWave->Timeout ); +} + +uint8_t RegionUS915ApplyDrOffset( uint8_t downlinkDwellTime, int8_t dr, int8_t drOffset ) +{ + int8_t datarate = DatarateOffsetsUS915[dr][drOffset]; + + if( datarate < 0 ) + { + datarate = DR_0; + } + return datarate; +} diff --git a/src/mac/region/RegionUS915.h b/src/mac/region/RegionUS915.h new file mode 100755 index 0000000..8c4a1b2 --- /dev/null +++ b/src/mac/region/RegionUS915.h @@ -0,0 +1,448 @@ +/*! + * \file RegionUS915.h + * + * \brief Region definition for US915 + * + * \copyright Revised BSD License, see section \ref LICENSE. + * + * \code + * ______ _ + * / _____) _ | | + * ( (____ _____ ____ _| |_ _____ ____| |__ + * \____ \| ___ | (_ _) ___ |/ ___) _ \ + * _____) ) ____| | | || |_| ____( (___| | | | + * (______/|_____)_|_|_| \__)_____)\____)_| |_| + * (C)2013 Semtech + * + * ___ _____ _ ___ _ _____ ___ ___ ___ ___ + * / __|_ _/_\ / __| |/ / __/ _ \| _ \/ __| __| + * \__ \ | |/ _ \ (__| ' <| _| (_) | / (__| _| + * |___/ |_/_/ \_\___|_|\_\_| \___/|_|_\\___|___| + * embedded.connectivity.solutions=============== + * + * \endcode + * + * \author Miguel Luis ( Semtech ) + * + * \author Gregory Cristian ( Semtech ) + * + * \author Daniel Jaeckle ( STACKFORCE ) + * + * \defgroup REGIONUS915 Region US915 + * Implementation according to LoRaWAN Specification v1.0.2. + * \{ + */ +#ifndef __REGION_US915_H__ +#define __REGION_US915_H__ + +/*! + * LoRaMac maximum number of channels + */ +#define US915_MAX_NB_CHANNELS 72 + +/*! + * Minimal datarate that can be used by the node + */ +#define US915_TX_MIN_DATARATE DR_0 + +/*! + * Maximal datarate that can be used by the node + */ +#define US915_TX_MAX_DATARATE DR_4 + +/*! + * Minimal datarate that can be used by the node + */ +#define US915_RX_MIN_DATARATE DR_8 + +/*! + * Maximal datarate that can be used by the node + */ +#define US915_RX_MAX_DATARATE DR_13 + +/*! + * Default datarate used by the node + */ +#define US915_DEFAULT_DATARATE DR_0 + +/*! + * Minimal Rx1 receive datarate offset + */ +#define US915_MIN_RX1_DR_OFFSET 0 + +/*! + * Maximal Rx1 receive datarate offset + */ +#define US915_MAX_RX1_DR_OFFSET 3 + +/*! + * Default Rx1 receive datarate offset + */ +#define US915_DEFAULT_RX1_DR_OFFSET 0 + +/*! + * Minimal Tx output power that can be used by the node + */ +#define US915_MIN_TX_POWER TX_POWER_10 + +/*! + * Maximal Tx output power that can be used by the node + */ +#define US915_MAX_TX_POWER TX_POWER_0 + +/*! + * Default Tx output power used by the node + */ +#define US915_DEFAULT_TX_POWER TX_POWER_0 + +/*! + * Default Max ERP + */ +#define US915_DEFAULT_MAX_ERP 30.0f + +/*! + * ADR Ack limit + */ +#define US915_ADR_ACK_LIMIT 64 + +/*! + * ADR Ack delay + */ +#define US915_ADR_ACK_DELAY 32 + +/*! + * Enabled or disabled the duty cycle + */ +#define US915_DUTY_CYCLE_ENABLED 0 + +/*! + * Maximum RX window duration + */ +#define US915_MAX_RX_WINDOW 3000 + +/*! + * Receive delay 1 + */ +#define US915_RECEIVE_DELAY1 1000 + +/*! + * Receive delay 2 + */ +#define US915_RECEIVE_DELAY2 2000 + +/*! + * Join accept delay 1 + */ +#define US915_JOIN_ACCEPT_DELAY1 5000 + +/*! + * Join accept delay 2 + */ +#define US915_JOIN_ACCEPT_DELAY2 6000 + +/*! + * Maximum frame counter gap + */ +#define US915_MAX_FCNT_GAP 16384 + +/*! + * Ack timeout + */ +#define US915_ACKTIMEOUT 2000 + +/*! + * Random ack timeout limits + */ +#define US915_ACK_TIMEOUT_RND 1000 + +/*! + * Second reception window channel frequency definition. + */ +#define US915_RX_WND_2_FREQ 923300000 + +/*! + * Second reception window channel datarate definition. + */ +#define US915_RX_WND_2_DR DR_8 + +/*! + * LoRaMac maximum number of bands + */ +#define US915_MAX_NB_BANDS 1 + +/*! + * Band 0 definition + * { DutyCycle, TxMaxPower, LastTxDoneTime, TimeOff } + */ +#define US915_BAND0 { 1, US915_MAX_TX_POWER, 0, 0 } // 100.0 % + +/*! + * Defines the first channel for RX window 1 for US band + */ +#define US915_FIRST_RX1_CHANNEL ( (uint32_t) 923300000 ) + +/*! + * Defines the last channel for RX window 1 for US band + */ +#define US915_LAST_RX1_CHANNEL ( (uint32_t) 927500000 ) + +/*! + * Defines the step width of the channels for RX window 1 + */ +#define US915_STEPWIDTH_RX1_CHANNEL ( (uint32_t) 600000 ) + +/*! + * Data rates table definition + */ +static const uint8_t DataratesUS915[] = { 10, 9, 8, 7, 8, 0, 0, 0, 12, 11, 10, 9, 8, 7, 0, 0 }; + +/*! + * Bandwidths table definition in Hz + */ +static const uint32_t BandwidthsUS915[] = { 125000, 125000, 125000, 125000, 500000, 0, 0, 0, 500000, 500000, 500000, 500000, 500000, 500000, 0, 0 }; + +/*! + * Up/Down link data rates offset definition + */ +static const int8_t DatarateOffsetsUS915[5][4] = +{ + { DR_10, DR_9 , DR_8 , DR_8 }, // DR_0 + { DR_11, DR_10, DR_9 , DR_8 }, // DR_1 + { DR_12, DR_11, DR_10, DR_9 }, // DR_2 + { DR_13, DR_12, DR_11, DR_10 }, // DR_3 + { DR_13, DR_13, DR_12, DR_11 }, // DR_4 +}; + +/*! + * Maximum payload with respect to the datarate index. Cannot operate with repeater. + */ +static const uint8_t MaxPayloadOfDatarateUS915[] = { 11, 53, 125, 242, 242, 0, 0, 0, 53, 129, 242, 242, 242, 242, 0, 0 }; + +/*! + * Maximum payload with respect to the datarate index. Can operate with repeater. + */ +static const uint8_t MaxPayloadOfDatarateRepeaterUS915[] = { 11, 53, 125, 242, 242, 0, 0, 0, 33, 109, 222, 222, 222, 222, 0, 0 }; + +/*! + * \brief The function gets a value of a specific phy attribute. + * + * \param [IN] getPhy Pointer to the function parameters. + * + * \retval Returns a structure containing the PHY parameter. + */ +PhyParam_t RegionUS915GetPhyParam( GetPhyParams_t* getPhy ); + +/*! + * \brief Updates the last TX done parameters of the current channel. + * + * \param [IN] txDone Pointer to the function parameters. + */ +void RegionUS915SetBandTxDone( SetBandTxDoneParams_t* txDone ); + +/*! + * \brief Initializes the channels masks and the channels. + * + * \param [IN] type Sets the initialization type. + */ +void RegionUS915InitDefaults( InitType_t type ); + +/*! + * \brief Verifies a parameter. + * + * \param [IN] verify Pointer to the function parameters. + * + * \param [IN] type Sets the initialization type. + * + * \retval Returns true, if the parameter is valid. + */ +bool RegionUS915Verify( VerifyParams_t* verify, PhyAttribute_t phyAttribute ); + +/*! + * \brief The function parses the input buffer and sets up the channels of the + * CF list. + * + * \param [IN] applyCFList Pointer to the function parameters. + */ +void RegionUS915ApplyCFList( ApplyCFListParams_t* applyCFList ); + +/*! + * \brief Sets a channels mask. + * + * \param [IN] chanMaskSet Pointer to the function parameters. + * + * \retval Returns true, if the channels mask could be set. + */ +bool RegionUS915ChanMaskSet( ChanMaskSetParams_t* chanMaskSet ); + +/*! + * \brief Calculates the next datarate to set, when ADR is on or off. + * + * \param [IN] adrNext Pointer to the function parameters. + * + * \param [OUT] drOut The calculated datarate for the next TX. + * + * \param [OUT] txPowOut The TX power for the next TX. + * + * \param [OUT] adrAckCounter The calculated ADR acknowledgement counter. + * + * \retval Returns true, if an ADR request should be performed. + */ +bool RegionUS915AdrNext( AdrNextParams_t* adrNext, int8_t* drOut, int8_t* txPowOut, uint32_t* adrAckCounter ); + +/*! + * Computes the Rx window timeout and offset. + * + * \param [IN] datarate Rx window datarate index to be used + * + * \param [IN] minRxSymbols Minimum required number of symbols to detect an Rx frame. + * + * \param [IN] rxError System maximum timing error of the receiver. In milliseconds + * The receiver will turn on in a [-rxError : +rxError] ms + * interval around RxOffset + * + * \param [OUT]rxConfigParams Returns updated WindowTimeout and WindowOffset fields. + */ +void RegionUS915ComputeRxWindowParameters( int8_t datarate, uint8_t minRxSymbols, uint32_t rxError, RxConfigParams_t *rxConfigParams ); + +/*! + * \brief Configuration of the RX windows. + * + * \param [IN] rxConfig Pointer to the function parameters. + * + * \param [OUT] datarate The datarate index which was set. + * + * \retval Returns true, if the configuration was applied successfully. + */ +bool RegionUS915RxConfig( RxConfigParams_t* rxConfig, int8_t* datarate ); + +/*! + * \brief TX configuration. + * + * \param [IN] txConfig Pointer to the function parameters. + * + * \param [OUT] txPower The tx power index which was set. + * + * \param [OUT] txTimeOnAir The time-on-air of the frame. + * + * \retval Returns true, if the configuration was applied successfully. + */ +bool RegionUS915TxConfig( TxConfigParams_t* txConfig, int8_t* txPower, TimerTime_t* txTimeOnAir ); + +/*! + * \brief The function processes a Link ADR Request. + * + * \param [IN] linkAdrReq Pointer to the function parameters. + * + * \retval Returns the status of the operation, according to the LoRaMAC specification. + */ +uint8_t RegionUS915LinkAdrReq( LinkAdrReqParams_t* linkAdrReq, int8_t* drOut, int8_t* txPowOut, uint8_t* nbRepOut, uint8_t* nbBytesParsed ); + +/*! + * \brief The function processes a RX Parameter Setup Request. + * + * \param [IN] rxParamSetupReq Pointer to the function parameters. + * + * \retval Returns the status of the operation, according to the LoRaMAC specification. + */ +uint8_t RegionUS915RxParamSetupReq( RxParamSetupReqParams_t* rxParamSetupReq ); + +/*! + * \brief The function processes a Channel Request. + * + * \param [IN] newChannelReq Pointer to the function parameters. + * + * \retval Returns the status of the operation, according to the LoRaMAC specification. + */ +uint8_t RegionUS915NewChannelReq( NewChannelReqParams_t* newChannelReq ); + +/*! + * \brief The function processes a TX ParamSetup Request. + * + * \param [IN] txParamSetupReq Pointer to the function parameters. + * + * \retval Returns the status of the operation, according to the LoRaMAC specification. + * Returns -1, if the functionality is not implemented. In this case, the end node + * shall not process the command. + */ +int8_t RegionUS915TxParamSetupReq( TxParamSetupReqParams_t* txParamSetupReq ); + +/*! + * \brief The function processes a DlChannel Request. + * + * \param [IN] dlChannelReq Pointer to the function parameters. + * + * \retval Returns the status of the operation, according to the LoRaMAC specification. + */ +uint8_t RegionUS915DlChannelReq( DlChannelReqParams_t* dlChannelReq ); + +/*! + * \brief Alternates the datarate of the channel for the join request. + * + * \param [IN] alternateDr Pointer to the function parameters. + * + * \retval Datarate to apply. + */ +int8_t RegionUS915AlternateDr( AlternateDrParams_t* alternateDr ); + +/*! + * \brief Calculates the back-off time. + * + * \param [IN] calcBackOff Pointer to the function parameters. + */ +void RegionUS915CalcBackOff( CalcBackOffParams_t* calcBackOff ); + +/*! + * \brief Searches and set the next random available channel + * + * \param [OUT] channel Next channel to use for TX. + * + * \param [OUT] time Time to wait for the next transmission according to the duty + * cycle. + * + * \param [OUT] aggregatedTimeOff Updates the aggregated time off. + * + * \retval Function status [1: OK, 0: Unable to find a channel on the current datarate] + */ +bool RegionUS915NextChannel( NextChanParams_t* nextChanParams, uint8_t* channel, TimerTime_t* time, TimerTime_t* aggregatedTimeOff ); + +/*! + * \brief Adds a channel. + * + * \param [IN] channelAdd Pointer to the function parameters. + * + * \retval Status of the operation. + */ +LoRaMacStatus_t RegionUS915ChannelAdd( ChannelAddParams_t* channelAdd ); + +/*! + * \brief Removes a channel. + * + * \param [IN] channelRemove Pointer to the function parameters. + * + * \retval Returns true, if the channel was removed successfully. + */ +bool RegionUS915ChannelsRemove( ChannelRemoveParams_t* channelRemove ); + +/*! + * \brief Sets the radio into continuous wave mode. + * + * \param [IN] continuousWave Pointer to the function parameters. + */ +void RegionUS915SetContinuousWave( ContinuousWaveParams_t* continuousWave ); + +/*! + * \brief Computes new datarate according to the given offset + * + * \param [IN] downlinkDwellTime Downlink dwell time configuration. 0: No limit, 1: 400ms + * + * \param [IN] dr Current datarate + * + * \param [IN] drOffset Offset to be applied + * + * \retval newDr Computed datarate. + */ +uint8_t RegionUS915ApplyDrOffset( uint8_t downlinkDwellTime, int8_t dr, int8_t drOffset ); + +/*! \} defgroup REGIONUS915 */ + +#endif // __REGION_US915_H__ diff --git a/src/main.c b/src/main.c new file mode 100755 index 0000000..3c783a3 --- /dev/null +++ b/src/main.c @@ -0,0 +1,935 @@ +/* + / _____) _ | | + ( (____ _____ ____ _| |_ _____ ____| |__ + \____ \| ___ | (_ _) ___ |/ ___) _ \ + _____) ) ____| | | || |_| ____( (___| | | | + (______/|_____)_|_|_| \__)_____)\____)_| |_| + (C)2013 Semtech + + Description: LoRaMac classA device implementation + + License: Revised BSD License, see LICENSE.TXT file include in the project + + Maintainer: Miguel Luis and Gregory Cristian + */ + +/*! \file classA/SensorNode/main.c */ + +#include +#include +#include "board.h" + +#include "LoRaMac.h" +#include "Region.h" +#include "Commissioning.h" + +/*! + * Defines the application data transmission duty cycle. 5s, value in [ms]. + */ +#define APP_TX_DUTYCYCLE 20000 + +/*! + * Defines a random delay for application data transmission duty cycle. 1s, + * value in [ms]. + */ +#define APP_TX_DUTYCYCLE_RND 1000 + +/*! + * Default datarate + */ +#define LORAWAN_DEFAULT_DATARATE DR_0 + +/*! + * LoRaWAN confirmed messages + */ +#define LORAWAN_CONFIRMED_MSG_ON false + +/*! + * LoRaWAN Adaptive Data Rate + * + * \remark Please note that when ADR is enabled the end-device should be static + */ +#define LORAWAN_ADR_ON 1 + +#if defined( REGION_EU868 ) + +#include "LoRaMacTest.h" + +/*! + * LoRaWAN ETSI duty cycle control enable/disable + * + * \remark Please note that ETSI mandates duty cycled transmissions. Use only for test purposes + */ +#define LORAWAN_DUTYCYCLE_ON true + +//#define USE_SEMTECH_DEFAULT_CHANNEL_LINEUP 1 + +#if( USE_SEMTECH_DEFAULT_CHANNEL_LINEUP == 1 ) + +#define LC4 { 867100000, 0, { ( ( DR_5 << 4 ) | DR_0 ) }, 0 } +#define LC5 { 867300000, 0, { ( ( DR_5 << 4 ) | DR_0 ) }, 0 } +#define LC6 { 867500000, 0, { ( ( DR_5 << 4 ) | DR_0 ) }, 0 } +#define LC7 { 867700000, 0, { ( ( DR_5 << 4 ) | DR_0 ) }, 0 } +#define LC8 { 867900000, 0, { ( ( DR_5 << 4 ) | DR_0 ) }, 0 } +#define LC9 { 868800000, 0, { ( ( DR_7 << 4 ) | DR_7 ) }, 2 } +#define LC10 { 868300000, 0, { ( ( DR_6 << 4 ) | DR_6 ) }, 1 } + +#endif + +#endif + +/*! + * LoRaWAN application port + */ +#define LORAWAN_APP_PORT 2 + +/*! + * User application data buffer size + */ +#if defined( REGION_CN470 ) || defined( REGION_CN779 ) || defined( REGION_EU433 ) || defined( REGION_EU868 ) || defined( REGION_IN865 ) || defined( REGION_KR920 ) + +#define LORAWAN_APP_DATA_SIZE 16 + +#elif defined( REGION_AS923 ) || defined( REGION_AU915 ) || defined( REGION_US915 ) || defined( REGION_US915_HYBRID ) + +#define LORAWAN_APP_DATA_SIZE 11 + +#else + +#error "Please define a region in the compiler options." + +#endif + +static uint8_t DevEui[] = LORAWAN_DEVICE_EUI; +static uint8_t AppEui[] = LORAWAN_APPLICATION_EUI; +static uint8_t AppKey[] = LORAWAN_APPLICATION_KEY; + +#if( OVER_THE_AIR_ACTIVATION == 0 ) + +static uint8_t NwkSKey[] = LORAWAN_NWKSKEY; +static uint8_t AppSKey[] = LORAWAN_APPSKEY; + +/*! + * Device address + */ +static uint32_t DevAddr = LORAWAN_DEVICE_ADDRESS; + +#endif + +/*! + * Application port + */ +static uint8_t AppPort = LORAWAN_APP_PORT; + +/*! + * User application data size + */ +static uint8_t AppDataSize = LORAWAN_APP_DATA_SIZE; + +/*! + * User application data buffer size + */ +#define LORAWAN_APP_DATA_MAX_SIZE 242 + +/*! + * User application data + */ +static uint8_t AppData[LORAWAN_APP_DATA_MAX_SIZE]; + +/*! + * Indicates if the node is sending confirmed or unconfirmed messages + */ +static uint8_t IsTxConfirmed = LORAWAN_CONFIRMED_MSG_ON; + +/*! + * Defines the application data transmission duty cycle + */ +static uint32_t TxDutyCycleTime; + +/*! + * Timer to handle the application data transmission duty cycle + */ +static TimerEvent_t TxNextPacketTimer; + +/*! + * Specifies the state of the application LED + */ +static bool AppLedStateOn = false; + +/*! + * Timer to handle the state of LED1 + */ +static TimerEvent_t Led1Timer; + +/*! + * Timer to handle the state of LED2 + */ +static TimerEvent_t Led2Timer; + +/*! + * Indicates if a new packet can be sent + */ +static bool NextTx = true; + +/*! + * Device states + */ +static enum eDeviceState { + DEVICE_STATE_INIT, + DEVICE_STATE_JOIN, + DEVICE_STATE_SEND, + DEVICE_STATE_CYCLE, + DEVICE_STATE_SLEEP +} DeviceState; + +/*! + * LoRaWAN compliance tests support data + */ +struct ComplianceTest_s { + bool Running; + uint8_t State; + bool IsTxConfirmed; + uint8_t AppPort; + uint8_t AppDataSize; + uint8_t *AppDataBuffer; + uint16_t DownLinkCounter; + bool LinkCheck; + uint8_t DemodMargin; + uint8_t NbGateways; +} ComplianceTest; + +void dump_hex2str(uint8_t *buf, uint8_t len) { + for (uint8_t i = 0; i < len; i++) { + printf("%02X ", buf[i]); + } + printf("\r\n"); +} + +/*! + * \brief Prepares the payload of the frame + */ +void test_gps(void) { + double latitude, longitude = 0; + int16_t altitudeGps = 0xFFFF; + uint8_t ret; + ret = GpsGetLatestGpsPositionDouble(&latitude, &longitude); + altitudeGps = GpsGetLatestGpsAltitude(); // in m + // printf("[Debug]: latitude: %f, longitude: %f , altitudeGps: %d \n", latitude, longitude, altitudeGps); +} + +void test_temp(void) { + int8_t tempr = 25; + + LIS3DH_GetTempRaw(&tempr); //only tempr changed value + tempr = tempr + 20; // temprature should be calibration in a right temp for every device + printf("[Debug]: tempr: %d Bat: %dmv\r\n", tempr, + BoardBatteryMeasureVolage()); +} + +uint8_t GPS_GETFAIL = FAIL; + +static void PrepareTxFrame(uint8_t port) { + double latitude, longitude = 0; + int16_t altitudeGps = 0xFFFF; + int8_t tempr = 25; + uint8_t ret; + uint16_t bat; + + switch (port) { + //https://mydevices.com/cayenne/docs/lora/#lora-cayenne-low-power-payload + //cayenne LPP GPS + case 2: { + ret = GpsGetLatestGpsPositionDouble(&latitude, &longitude); + altitudeGps = GpsGetLatestGpsAltitude(); // in m + //printf("[Debug]: latitude: %f, longitude: %f , altitudeGps: %d \n", latitude, longitude, altitudeGps); + printf("GpsGetLatestGpsPositionDouble ret = %d\r\n", ret); + if (ret == SUCCESS) { + AppData[0] = 0x01; + AppData[1] = 0x88; + AppData[2] = ((int32_t) (latitude * 10000) >> 16) & 0xFF; + AppData[3] = ((int32_t) (latitude * 10000) >> 8) & 0xFF; + AppData[4] = ((int32_t) (latitude * 10000)) & 0xFF; + AppData[5] = ((int32_t) (longitude * 10000) >> 16) & 0xFF; + AppData[6] = ((int32_t) (longitude * 10000) >> 8) & 0xFF; + AppData[7] = ((int32_t) (longitude * 10000)) & 0xFF; + AppData[8] = ((altitudeGps * 100) >> 16) & 0xFF; + AppData[9] = ((altitudeGps * 100) >> 8) & 0xFF; + AppData[10] = (altitudeGps * 100) & 0xFF; + AppDataSize = 11; + } else { + AppDataSize = 0; + GPS_GETFAIL = SUCCESS; + } + } + break; + //cayenne LPP Temp + case 3: { + AppData[0] = 0x02; + AppData[1] = 0x67; +#if 1 + LIS3DH_GetTempRaw(&tempr); //only tempr changed value + tempr = tempr + 20; // temprature should be calibration in a right temp for every device +#else + tempr = randr( 15, 22); +#endif + AppData[2] = ((tempr * 10) >> 8) & 0xFF; + AppData[3] = (tempr * 10) & 0xFF; + + AppData[4] = 0x04; + AppData[5] = 0x03; //Analog Output + bat = BoardBatteryMeasureVolage(); + AppData[6] = ((bat / 10) >> 8) & 0xFF; + AppData[7] = (bat / 10) & 0xFF; + AppDataSize = 8; + printf("[Debug]: tempr: %d Bat: %dmv\r\n", tempr, bat); + } + break; + //cayenne LPP Acceleration + case 4: { + AppData[0] = 0x03; + AppData[1] = 0x71; + for (uint8_t index = 0; index < 6; index++) { + LIS3DH_ReadReg(LIS3DH_OUT_X_L + index, AppData + 2 + index); + DelayMs(2); + } + AppDataSize = 8; + printf("[Debug]: ACC X:%04X Y:%04X Z:%04X\r\n", + AppData[3] << 8 | AppData[2], AppData[5] << 8 | AppData[4], + AppData[7] << 8 | AppData[6]); + } + break; + case 224: + if (ComplianceTest.LinkCheck == true) { + ComplianceTest.LinkCheck = false; + AppDataSize = 3; + AppData[0] = 5; + AppData[1] = ComplianceTest.DemodMargin; + AppData[2] = ComplianceTest.NbGateways; + ComplianceTest.State = 1; + } else { + switch (ComplianceTest.State) { + case 4: + ComplianceTest.State = 1; + break; + case 1: + AppDataSize = 2; + AppData[0] = ComplianceTest.DownLinkCounter >> 8; + AppData[1] = ComplianceTest.DownLinkCounter; + break; + } + } + break; + default: + break; + } +} + +/*! + * \brief Prepares the payload of the frame + * + * \retval [0: frame could be send, 1: error] + */ +static bool SendFrame(void) { + McpsReq_t mcpsReq; + LoRaMacTxInfo_t txInfo; + + if (LoRaMacQueryTxPossible(AppDataSize, &txInfo) != LORAMAC_STATUS_OK) { + // Send empty frame in order to flush MAC commands + mcpsReq.Type = MCPS_UNCONFIRMED; + mcpsReq.Req.Unconfirmed.fBuffer = NULL; + mcpsReq.Req.Unconfirmed.fBufferSize = 0; + mcpsReq.Req.Unconfirmed.Datarate = LORAWAN_DEFAULT_DATARATE; + } else { + if (IsTxConfirmed == false) { + mcpsReq.Type = MCPS_UNCONFIRMED; + mcpsReq.Req.Unconfirmed.fPort = AppPort; + mcpsReq.Req.Unconfirmed.fBuffer = AppData; + mcpsReq.Req.Unconfirmed.fBufferSize = AppDataSize; + mcpsReq.Req.Unconfirmed.Datarate = LORAWAN_DEFAULT_DATARATE; + } else { + mcpsReq.Type = MCPS_CONFIRMED; + mcpsReq.Req.Confirmed.fPort = AppPort; + mcpsReq.Req.Confirmed.fBuffer = AppData; + mcpsReq.Req.Confirmed.fBufferSize = AppDataSize; + mcpsReq.Req.Confirmed.NbTrials = 8; + mcpsReq.Req.Confirmed.Datarate = LORAWAN_DEFAULT_DATARATE; + } + } + + if (LoRaMacMcpsRequest(&mcpsReq) == LORAMAC_STATUS_OK) { + return false; + } + return true; +} + +/*! + * \brief Function executed on TxNextPacket Timeout event + */ +static void OnTxNextPacketTimerEvent(void) { + MibRequestConfirm_t mibReq; + LoRaMacStatus_t status; + + TimerStop(&TxNextPacketTimer); + + mibReq.Type = MIB_NETWORK_JOINED; + status = LoRaMacMibGetRequestConfirm(&mibReq); + + if (status == LORAMAC_STATUS_OK) { + if (mibReq.Param.IsNetworkJoined == true) { + DeviceState = DEVICE_STATE_SEND; + NextTx = true; + } else { + DeviceState = DEVICE_STATE_JOIN; + } + } +} + +/*! + * \brief Function executed on Led 1 Timeout event + */ +static void OnLed1TimerEvent(void) { + TimerStop(&Led1Timer); + // Toggle LED 1 + GpioToggle(&Led1); + TimerStart(&Led1Timer); +} + +/*! + * \brief Function executed on Led 2 Timeout event + */ +static void OnLed2TimerEvent(void) { + TimerStop(&Led2Timer); + // Switch LED 2 OFF + GpioWrite(&Led2, 1); +} + +/*! + * \brief MCPS-Confirm event function + * + * \param [IN] mcpsConfirm - Pointer to the confirm structure, + * containing confirm attributes. + */ +static void McpsConfirm(McpsConfirm_t *mcpsConfirm) { + if (mcpsConfirm->Status == LORAMAC_EVENT_INFO_STATUS_OK) { + switch (mcpsConfirm->McpsRequest) { + case MCPS_UNCONFIRMED: { + // Check Datarate + // Check TxPower + break; + } + case MCPS_CONFIRMED: { + // Check Datarate + // Check TxPower + // Check AckReceived + // Check NbTrials + break; + } + case MCPS_PROPRIETARY: { + break; + } + default: + break; + } + + } + NextTx = true; +} + +/*! + * \brief MCPS-Indication event function + * + * \param [IN] mcpsIndication - Pointer to the indication structure, + * containing indication attributes. + */ +static void McpsIndication(McpsIndication_t *mcpsIndication) { + if (mcpsIndication->Status != LORAMAC_EVENT_INFO_STATUS_OK) { + return; + } + + switch (mcpsIndication->McpsIndication) { + case MCPS_UNCONFIRMED: { + break; + } + case MCPS_CONFIRMED: { + break; + } + case MCPS_PROPRIETARY: { + break; + } + case MCPS_MULTICAST: { + break; + } + default: + break; + } + + // Check Multicast + // Check Port + // Check Datarate + // Check FramePending + // Check Buffer + // Check BufferSize + // Check Rssi + // Check Snr + // Check RxSlot + + if (ComplianceTest.Running == true) { + ComplianceTest.DownLinkCounter++; + } + + if (mcpsIndication->RxData == true) { + switch (mcpsIndication->Port) { + case 1: // The application LED can be controlled on port 1 or 2 + case 2: + if (mcpsIndication->BufferSize == 1) { + AppLedStateOn = mcpsIndication->Buffer[0] & 0x01; + GpioWrite(&Led2, ((AppLedStateOn & 0x01) != 0) ? 0 : 1); + } + break; + case 224: + if (ComplianceTest.Running == false) { + // Check compliance test enable command (i) + if ((mcpsIndication->BufferSize == 4) + && (mcpsIndication->Buffer[0] == 0x01) + && (mcpsIndication->Buffer[1] == 0x01) + && (mcpsIndication->Buffer[2] == 0x01) + && (mcpsIndication->Buffer[3] == 0x01)) { + IsTxConfirmed = false; + AppPort = 224; + AppDataSize = 2; + ComplianceTest.DownLinkCounter = 0; + ComplianceTest.LinkCheck = false; + ComplianceTest.DemodMargin = 0; + ComplianceTest.NbGateways = 0; + ComplianceTest.Running = true; + ComplianceTest.State = 1; + + MibRequestConfirm_t mibReq; + mibReq.Type = MIB_ADR; + mibReq.Param.AdrEnable = true; + LoRaMacMibSetRequestConfirm(&mibReq); + +#if defined( REGION_EU868 ) + LoRaMacTestSetDutyCycleOn( false ); +#endif + GpsStop(); + } + } else { + ComplianceTest.State = mcpsIndication->Buffer[0]; + switch (ComplianceTest.State) { + case 0: // Check compliance test disable command (ii) + IsTxConfirmed = LORAWAN_CONFIRMED_MSG_ON; + AppPort = LORAWAN_APP_PORT; + AppDataSize = LORAWAN_APP_DATA_SIZE; + ComplianceTest.DownLinkCounter = 0; + ComplianceTest.Running = false; + + MibRequestConfirm_t mibReq; + mibReq.Type = MIB_ADR; + mibReq.Param.AdrEnable = LORAWAN_ADR_ON; + LoRaMacMibSetRequestConfirm(&mibReq); +#if defined( REGION_EU868 ) + LoRaMacTestSetDutyCycleOn( LORAWAN_DUTYCYCLE_ON ); +#endif + GpsStart(); + break; + case 1: // (iii, iv) + AppDataSize = 2; + break; + case 2: // Enable confirmed messages (v) + IsTxConfirmed = true; + ComplianceTest.State = 1; + break; + case 3: // Disable confirmed messages (vi) + IsTxConfirmed = false; + ComplianceTest.State = 1; + break; + case 4: // (vii) + AppDataSize = mcpsIndication->BufferSize; + + AppData[0] = 4; + for (uint8_t i = 1; + i < MIN(AppDataSize, LORAWAN_APP_DATA_MAX_SIZE); + i++) { + AppData[i] = mcpsIndication->Buffer[i] + 1; + } + break; + case 5: // (viii) + { + MlmeReq_t mlmeReq; + mlmeReq.Type = MLME_LINK_CHECK; + LoRaMacMlmeRequest(&mlmeReq); + } + break; + case 6: // (ix) + { + MlmeReq_t mlmeReq; + + // Disable TestMode and revert back to normal operation + IsTxConfirmed = LORAWAN_CONFIRMED_MSG_ON; + AppPort = LORAWAN_APP_PORT; + AppDataSize = LORAWAN_APP_DATA_SIZE; + ComplianceTest.DownLinkCounter = 0; + ComplianceTest.Running = false; + + MibRequestConfirm_t mibReq; + mibReq.Type = MIB_ADR; + mibReq.Param.AdrEnable = LORAWAN_ADR_ON; + LoRaMacMibSetRequestConfirm(&mibReq); +#if defined( REGION_EU868 ) + LoRaMacTestSetDutyCycleOn( LORAWAN_DUTYCYCLE_ON ); +#endif + GpsStart(); + + mlmeReq.Type = MLME_JOIN; + + mlmeReq.Req.Join.DevEui = DevEui; + mlmeReq.Req.Join.AppEui = AppEui; + mlmeReq.Req.Join.AppKey = AppKey; + mlmeReq.Req.Join.NbTrials = 3; + + LoRaMacMlmeRequest(&mlmeReq); + DeviceState = DEVICE_STATE_SLEEP; + } + break; + case 7: // (x) + { + if (mcpsIndication->BufferSize == 3) { + MlmeReq_t mlmeReq; + mlmeReq.Type = MLME_TXCW; + mlmeReq.Req.TxCw.Timeout = (uint16_t)( + (mcpsIndication->Buffer[1] << 8) + | mcpsIndication->Buffer[2]); + LoRaMacMlmeRequest(&mlmeReq); + } else if (mcpsIndication->BufferSize == 7) { + MlmeReq_t mlmeReq; + mlmeReq.Type = MLME_TXCW_1; + mlmeReq.Req.TxCw.Timeout = (uint16_t)( + (mcpsIndication->Buffer[1] << 8) + | mcpsIndication->Buffer[2]); + mlmeReq.Req.TxCw.Frequency = + (uint32_t) ((mcpsIndication->Buffer[3] << 16) + | (mcpsIndication->Buffer[4] << 8) + | mcpsIndication->Buffer[5]) * 100; + mlmeReq.Req.TxCw.Power = mcpsIndication->Buffer[6]; + LoRaMacMlmeRequest(&mlmeReq); + } + ComplianceTest.State = 1; + } + break; + default: + break; + } + } + break; + default: + break; + } + } + + // Switch LED 1 ON for each received downlink + GpioWrite(&Led1, 0); + TimerStart(&Led1Timer); +} + +/*! + * \brief MLME-Confirm event function + * + * \param [IN] mlmeConfirm - Pointer to the confirm structure, + * containing confirm attributes. + */ +static void MlmeConfirm(MlmeConfirm_t *mlmeConfirm) { + switch (mlmeConfirm->MlmeRequest) { + case MLME_JOIN: { + if (mlmeConfirm->Status == LORAMAC_EVENT_INFO_STATUS_OK) { + // Status is OK, node has joined the network + DeviceState = DEVICE_STATE_SEND; + printf("OTAA Join Success \r\n"); + // Switch LED 1 ON + GpioWrite(&Led1, 0); + TimerStart(&Led1Timer); + } else { + // Join was not successful. Try to join again + DeviceState = DEVICE_STATE_JOIN; + } + break; + } + case MLME_LINK_CHECK: { + if (mlmeConfirm->Status == LORAMAC_EVENT_INFO_STATUS_OK) { + // Check DemodMargin + // Check NbGateways + if (ComplianceTest.Running == true) { + ComplianceTest.LinkCheck = true; + ComplianceTest.DemodMargin = mlmeConfirm->DemodMargin; + ComplianceTest.NbGateways = mlmeConfirm->NbGateways; + } + } + break; + } + default: + break; + } + NextTx = true; +} + +/** + * Main application entry point. + */ +int main(void) { + LoRaMacPrimitives_t LoRaMacPrimitives; + LoRaMacCallback_t LoRaMacCallbacks; + MibRequestConfirm_t mibReq; + + BoardInitMcu(); + BoardInitPeriph(); + + DeviceState = DEVICE_STATE_INIT; + printf("RAK811 BreakBoard soft version: 1.0.2\r\n"); + + while (1) { + switch (DeviceState) { + case DEVICE_STATE_INIT: { + LoRaMacPrimitives.MacMcpsConfirm = McpsConfirm; + LoRaMacPrimitives.MacMcpsIndication = McpsIndication; + LoRaMacPrimitives.MacMlmeConfirm = MlmeConfirm; + LoRaMacCallbacks.GetBatteryLevel = BoardGetBatteryLevel; +#if defined( REGION_AS923 ) + LoRaMacInitialization( &LoRaMacPrimitives, &LoRaMacCallbacks, LORAMAC_REGION_AS923 ); +#elif defined( REGION_AU915 ) + LoRaMacInitialization( &LoRaMacPrimitives, &LoRaMacCallbacks, LORAMAC_REGION_AU915 ); +#elif defined( REGION_CN470 ) + LoRaMacInitialization( &LoRaMacPrimitives, &LoRaMacCallbacks, LORAMAC_REGION_CN470 ); +#elif defined( REGION_CN779 ) + LoRaMacInitialization( &LoRaMacPrimitives, &LoRaMacCallbacks, LORAMAC_REGION_CN779 ); +#elif defined( REGION_EU433 ) + LoRaMacInitialization( &LoRaMacPrimitives, &LoRaMacCallbacks, LORAMAC_REGION_EU433 ); +#elif defined( REGION_EU868 ) + LoRaMacInitialization( &LoRaMacPrimitives, &LoRaMacCallbacks, LORAMAC_REGION_EU868 ); +#elif defined( REGION_IN865 ) + LoRaMacInitialization( &LoRaMacPrimitives, &LoRaMacCallbacks, LORAMAC_REGION_IN865 ); +#elif defined( REGION_KR920 ) + LoRaMacInitialization( &LoRaMacPrimitives, &LoRaMacCallbacks, LORAMAC_REGION_KR920 ); +#elif defined( REGION_US915 ) + LoRaMacInitialization(&LoRaMacPrimitives, &LoRaMacCallbacks, + LORAMAC_REGION_US915); +#elif defined( REGION_US915_HYBRID ) + LoRaMacInitialization( &LoRaMacPrimitives, &LoRaMacCallbacks, LORAMAC_REGION_US915_HYBRID ); +#else +#error "Please define a region in the compiler options." +#endif + TimerInit(&TxNextPacketTimer, OnTxNextPacketTimerEvent); + + TimerInit(&Led1Timer, OnLed1TimerEvent); + TimerSetValue(&Led1Timer, 2000); + + TimerInit(&Led2Timer, OnLed2TimerEvent); + TimerSetValue(&Led2Timer, 50); + + mibReq.Type = MIB_ADR; + mibReq.Param.AdrEnable = LORAWAN_ADR_ON; + LoRaMacMibSetRequestConfirm(&mibReq); + + mibReq.Type = MIB_PUBLIC_NETWORK; + mibReq.Param.EnablePublicNetwork = LORAWAN_PUBLIC_NETWORK; + LoRaMacMibSetRequestConfirm(&mibReq); + + DeviceState = DEVICE_STATE_JOIN; + break; + } + case DEVICE_STATE_JOIN: { +#if( OVER_THE_AIR_ACTIVATION != 0 ) + MlmeReq_t mlmeReq; + + // Initialize LoRaMac device unique ID + //BoardGetUniqueId( DevEui ); + + printf("OTAA: \r\n"); + printf("Dev_EUI: "); + dump_hex2str(DevEui, 8); + printf("AppEui: "); + dump_hex2str(AppEui, 8); + printf("AppKey: "); + dump_hex2str(AppKey, 16); + + mlmeReq.Type = MLME_JOIN; + + mlmeReq.Req.Join.DevEui = DevEui; + mlmeReq.Req.Join.AppEui = AppEui; + mlmeReq.Req.Join.AppKey = AppKey; + mlmeReq.Req.Join.NbTrials = 3; + +#if defined ( REGION_US915 ) // Used in TTN US915 band. + uint16_t ch_mask[5]; + ch_mask[0] = 0xff00; + ch_mask[1] = 0x0000; + ch_mask[2] = 0x0000; + ch_mask[3] = 0x0000; + ch_mask[4] = 0x0000; + + mibReq.Type = MIB_CHANNELS_DEFAULT_MASK; + mibReq.Param.ChannelsDefaultMask = ch_mask; + LoRaMacMibSetRequestConfirm(&mibReq); + + mibReq.Type = MIB_CHANNELS_MASK; + mibReq.Param.ChannelsDefaultMask = ch_mask; + LoRaMacMibSetRequestConfirm(&mibReq); +#endif + + if (NextTx == true) { + LoRaMacMlmeRequest(&mlmeReq); + printf("OTAA Join Start... \r\n"); + } + DeviceState = DEVICE_STATE_SLEEP; + +#else + // Choose a random device address if not already defined in Commissioning.h + if( DevAddr == 0 ) + { + // Random seed initialization + srand1( BoardGetRandomSeed( ) ); + + // Choose a random device address + DevAddr = randr( 0, 0x01FFFFFF ); + } + + printf("ABP: \r\n"); + printf("Dev_EUI: "); + dump_hex2str(DevEui , 8); + printf("DevAddr: %08X\r\n", DevAddr); + printf("NwkSKey: "); + dump_hex2str(NwkSKey , 16); + printf("AppSKey: "); + dump_hex2str(AppSKey , 16); + + mibReq.Type = MIB_NET_ID; + mibReq.Param.NetID = LORAWAN_NETWORK_ID; + LoRaMacMibSetRequestConfirm( &mibReq ); + + mibReq.Type = MIB_DEV_ADDR; + mibReq.Param.DevAddr = DevAddr; + LoRaMacMibSetRequestConfirm( &mibReq ); + + mibReq.Type = MIB_NWK_SKEY; + mibReq.Param.NwkSKey = NwkSKey; + LoRaMacMibSetRequestConfirm( &mibReq ); + + mibReq.Type = MIB_APP_SKEY; + mibReq.Param.AppSKey = AppSKey; + LoRaMacMibSetRequestConfirm( &mibReq ); + + mibReq.Type = MIB_NETWORK_JOINED; + mibReq.Param.IsNetworkJoined = true; + LoRaMacMibSetRequestConfirm( &mibReq ); + + // Switch LED 1 ON + GpioWrite( &Led1, 0 ); + TimerStart( &Led1Timer ); + DeviceState = DEVICE_STATE_SEND; +#endif + break; + } + case DEVICE_STATE_SEND: { + if (NextTx == true) { + PrepareTxFrame(AppPort); + + if (GPS_GETFAIL == SUCCESS) { + GPS_GETFAIL = FAIL; + } else { + NextTx = SendFrame(); + } + + AppPort++; + if (AppPort >= 5) { + AppPort = 2; + } + } + if (ComplianceTest.Running == true) { + // Schedule next packet transmission + TxDutyCycleTime = 5000; // 5000 ms + } else { + // Schedule next packet transmission + TxDutyCycleTime = APP_TX_DUTYCYCLE + + randr(-APP_TX_DUTYCYCLE_RND, APP_TX_DUTYCYCLE_RND); + } + DeviceState = DEVICE_STATE_CYCLE; + break; + } + case DEVICE_STATE_CYCLE: { + DeviceState = DEVICE_STATE_SLEEP; + + // Schedule next packet transmission + TimerSetValue(&TxNextPacketTimer, TxDutyCycleTime); + TimerStart(&TxNextPacketTimer); + break; + } + case DEVICE_STATE_SLEEP: { + // Wake up through events + TimerLowPowerHandler(); + break; + } + default: { + DeviceState = DEVICE_STATE_INIT; + break; + } + } + if (GpsGetPpsDetectedState() == true) { + // Switch LED 2 ON + GpioWrite(&Led2, 0); + TimerStart(&Led2Timer); + } + if (Lis3dhGetIntState() == true) { + Lis3dh_IntEventClear(); + for (uint8_t index = 0; index < 6; index++) { + LIS3DH_ReadReg(LIS3DH_OUT_X_L + index, AppData + 2 + index); + DelayMs(1); + } + //printf("[Debug]: ACC X:%04X Y:%04X Z:%04X\r\n", AppData[3]<<8 | AppData[2], AppData[5]<<8 | AppData[4], AppData[7]<<8 | AppData[6]); + } + } +} + +#if 0 +#include "stm32l1xx_hal.h" + +#define LED1_PIN GPIO_PIN_12 +#define LED1_GPIO_PORT GPIOA +#define LED1_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE() + +#define LED2_PIN GPIO_PIN_4 +#define LED2_GPIO_PORT GPIOB +#define LED2_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE() +void LED_Init(); + +int main(void) { + HAL_Init(); + LED_Init(); + + while (1) + { + HAL_GPIO_TogglePin(LED1_GPIO_PORT, LED1_PIN); + HAL_Delay(1000); + HAL_GPIO_TogglePin(LED2_GPIO_PORT, LED2_PIN); + } +} + +void LED_Init() { + LED1_GPIO_CLK_ENABLE(); + GPIO_InitTypeDef GPIO_InitStruct; + GPIO_InitStruct.Pin = LED1_PIN; + GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; + GPIO_InitStruct.Pull = GPIO_PULLUP; + GPIO_InitStruct.Speed = GPIO_SPEED_HIGH; + HAL_GPIO_Init(LED1_GPIO_PORT, &GPIO_InitStruct); + + LED2_GPIO_CLK_ENABLE(); + GPIO_InitStruct.Pin = LED2_PIN; + GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; + GPIO_InitStruct.Pull = GPIO_PULLUP; + GPIO_InitStruct.Speed = GPIO_SPEED_HIGH; + HAL_GPIO_Init(LED2_GPIO_PORT, &GPIO_InitStruct); +} + +void SysTick_Handler(void) { + HAL_IncTick(); +} +#endif \ No newline at end of file diff --git a/src/peripherals/gpio-ioe.c b/src/peripherals/gpio-ioe.c new file mode 100755 index 0000000..c6b6706 --- /dev/null +++ b/src/peripherals/gpio-ioe.c @@ -0,0 +1,277 @@ +/* + / _____) _ | | +( (____ _____ ____ _| |_ _____ ____| |__ + \____ \| ___ | (_ _) ___ |/ ___) _ \ + _____) ) ____| | | || |_| ____( (___| | | | +(______/|_____)_|_|_| \__)_____)\____)_| |_| + (C)2013 Semtech + +Description: IO expander implementation (based on the sx1509) + +License: Revised BSD License, see LICENSE.TXT file include in the project + +Maintainer: Miguel Luis and Gregory Cristian +*/ +#include "board.h" +#include "gpio-ioe.h" +#include "sx1509.h" + +static GpioIoeIrqHandler *GpioIoeIrq[16]; + +void GpioIoeInit( Gpio_t *obj, PinNames pin, PinModes mode, PinConfigs config, PinTypes type, uint32_t value ) +{ + uint8_t regAdd = 0; + uint8_t regVal = 0; + uint8_t tempVal = 0; + + SX1509Init( ); + + obj->pin = pin; + obj->pinIndex = ( 0x01 << pin % 16 ); + + if( ( obj->pin % 16 ) > 0x07 ) + { + regAdd = RegDirB; + obj->pinIndex = ( obj->pinIndex >> 8 ) & 0x00FF; + } + else + { + regAdd = RegDirA; + obj->pinIndex = ( obj->pinIndex ) & 0x00FF; + } + + SX1509Read( regAdd, ®Val ); + + if( mode == PIN_OUTPUT ) + { + regVal = regVal & ~obj->pinIndex; + } + else + { + regVal = regVal | obj->pinIndex; + } + SX1509Write( regAdd, regVal ); + + + if( ( obj->pin % 16 ) > 0x07 ) + { + SX1509Read( RegOpenDrainB, &tempVal ); + if( config == PIN_OPEN_DRAIN ) + { + SX1509Write( RegOpenDrainB, tempVal | obj->pinIndex ); + } + else + { + SX1509Write( RegOpenDrainB, tempVal & ~obj->pinIndex ); + } + regAdd = RegDataB; + } + else + { + SX1509Read( RegOpenDrainA, &tempVal ); + if( config == PIN_OPEN_DRAIN ) + { + SX1509Write( RegOpenDrainA, tempVal | obj->pinIndex ); + } + else + { + SX1509Write( RegOpenDrainA, tempVal & ~obj->pinIndex ); + } + regAdd = RegDataA; + } + + SX1509Read( regAdd, ®Val ); + + // Sets initial output value + if( value == 0 ) + { + regVal = regVal & ~obj->pinIndex; + } + else + { + regVal = regVal | obj->pinIndex; + } + SX1509Write( regAdd, regVal ); + +} + +void GpioIoeSetInterrupt( Gpio_t *obj, IrqModes irqMode, IrqPriorities irqPriority, GpioIoeIrqHandler *irqHandler ) +{ + uint8_t regAdd = 0; + uint8_t regVal = 0; + uint8_t i = 0; + uint16_t tempVal = 0; + uint8_t val = 0; + + if( ( obj->pin % 16 ) > 0x07 ) + { + regAdd = RegInterruptMaskB; + } + else + { + regAdd = RegInterruptMaskA; + } + + SX1509Read( regAdd, ®Val ); + + regVal = regVal & ~( obj->pinIndex ); + SX1509Write( regAdd, regVal ); + + if( irqMode == IRQ_RISING_EDGE ) + { + val = 0x01; + } + else if( irqMode == IRQ_FALLING_EDGE ) + { + val = 0x02; + } + else // IRQ_RISING_FALLING_EDGE + { + val = 0x03; + } + + tempVal = 0x0000; + i = 0; + while( tempVal != obj->pinIndex ) + { + tempVal = 0x01 << i; + i++; + } + + if( i < 4 ) + { + regAdd = RegSenseLowA; + } + else if( i < 9 ) + { + regAdd = RegSenseHighA; + } + else if( i < 13 ) + { + regAdd = RegSenseLowB; + } + else + { + regAdd = RegSenseHighB; + } + SX1509Read( regAdd, ®Val ); + + switch( i ) + { + case 1: + case 5: + case 9: + case 13: + regVal = ( regVal & REG_SENSE_PIN_MASK_1 ) | val; + break; + + case 2: + case 6: + case 10: + case 14: + regVal = ( regVal & REG_SENSE_PIN_MASK_2 ) | ( val << 2 ); + break; + + case 3: + case 7: + case 11: + case 15: + regVal = ( regVal & REG_SENSE_PIN_MASK_3 ) | ( val << 4 ); + break; + + case 4: + case 8: + case 12: + case 16: + regVal = ( regVal & REG_SENSE_PIN_MASK_4 ) | ( val << 6 ); + break; + } + SX1509Write( regAdd, regVal ); + + GpioIoeIrq[obj->pin & 0x0F] = irqHandler; +} + +void GpioIoeWrite( Gpio_t *obj, uint32_t value ) +{ + uint8_t regAdd = 0; + uint8_t regVal = 0; + + if( ( obj->pin % 16 ) > 0x07 ) + { + regAdd = RegDataB; + } + else + { + regAdd = RegDataA; + } + + SX1509Read( regAdd, ®Val ); + + // Sets initial output value + if( value == 0 ) + { + regVal = regVal & ~obj->pinIndex; + } + else + { + regVal = regVal | obj->pinIndex; + } + SX1509Write( regAdd, regVal ); +} + +uint32_t GpioIoeRead( Gpio_t *obj ) +{ + uint8_t regAdd = 0; + uint8_t regVal = 0; + + if( ( obj->pin % 16 ) > 0x07 ) + { + regAdd = RegDataB; + } + else + { + regAdd = RegDataA; + } + + SX1509Read( regAdd, ®Val ); + + if( ( regVal & obj->pinIndex ) == 0x00 ) + { + return 0; + } + else + { + return 1; + } +} + +void GpioIoeInterruptHandler( void ) +{ + uint8_t irqLsb = 0; + uint8_t irqMsb = 0; + uint16_t irq = 0; + + SX1509Read( RegInterruptSourceA, &irqLsb ); + SX1509Read( RegInterruptSourceB, &irqMsb ); + + irq = ( irqMsb << 8 ) | irqLsb; + if( irq != 0x00 ) + { + for( uint16_t mask = 0x0001, pinIndex = 0; mask != 0x000; mask <<= 1, pinIndex++ ) + { + if( ( irq & mask ) != 0 ) + { + if( GpioIoeIrq[pinIndex] != NULL ) + { + GpioIoeIrq[pinIndex]( ); + } + } + } + } + + // Clear all interrupts/events + SX1509Write( RegInterruptSourceA, 0xFF ); + SX1509Write( RegInterruptSourceB, 0xFF ); + SX1509Write( RegEventStatusB, 0xFF ); + SX1509Write( RegEventStatusA, 0xFF ); +} diff --git a/src/peripherals/gpio-ioe.h b/src/peripherals/gpio-ioe.h new file mode 100755 index 0000000..8b8a4e6 --- /dev/null +++ b/src/peripherals/gpio-ioe.h @@ -0,0 +1,65 @@ +/* + / _____) _ | | +( (____ _____ ____ _| |_ _____ ____| |__ + \____ \| ___ | (_ _) ___ |/ ___) _ \ + _____) ) ____| | | || |_| ____( (___| | | | +(______/|_____)_|_|_| \__)_____)\____)_| |_| + (C)2013 Semtech + +Description: IO expander driver implementation + +License: Revised BSD License, see LICENSE.TXT file include in the project + +Maintainer: Miguel Luis and Gregory Cristian +*/ +#ifndef __GPIO_IOE_H__ +#define __GPIO_IOE_H__ + +/*! + * \brief Initializes the given GPIO object + * + * \param [IN] obj Pointer to the GPIO object to be initialized + * \param [IN] pin Pin name ( please look in pinName-board.h file ) + * \param [IN] mode Pin mode [PIN_INPUT, PIN_OUTPUT, + * PIN_ALTERNATE_FCT, PIN_ANALOGIC] + * \param [IN] config Pin config [PIN_PUSH_PULL, PIN_OPEN_DRAIN] + * \param [IN] type Pin type [PIN_NO_PULL, PIN_PULL_UP, PIN_PULL_DOWN] + * \param [IN] value Default output value at initialization + */ +void GpioIoeInit( Gpio_t *obj, PinNames pin, PinModes mode, PinConfigs config, PinTypes type, uint32_t value ); + +/*! + * \brief GPIO IRQ Initialization + * + * \param [IN] obj Pointer to the GPIO object to be initialized + * \param [IN] irqMode IRQ mode [NO_IRQ, IRQ_RISING_EDGE, + * IRQ_FALLING_EDGE, IRQ_RISING_FALLING_EDGE] + * \param [IN] irqPriority IRQ priority [IRQ_VERY_LOW_PRIORITY, IRQ_LOW_PRIORITY + * IRQ_MEDIUM_PRIORITY, IRQ_HIGH_PRIORITY + * IRQ_VERY_HIGH_PRIORITY] + * \param [IN] irqHandler Callback function pointer + */ +void GpioIoeSetInterrupt( Gpio_t *obj, IrqModes irqMode, IrqPriorities irqPriority, GpioIrqHandler *irqHandler ); + +/*! + * \brief Writes the given value to the GPIO output + * + * \param [IN] obj Pointer to the GPIO object + * \param [IN] value New GPIO output value + */ +void GpioIoeWrite( Gpio_t *obj, uint32_t value ); + +/*! + * \brief Reads the current GPIO input value + * + * \param [IN] obj Pointer to the GPIO object + * \retval value Current GPIO input value + */ +uint32_t GpioIoeRead( Gpio_t *obj ); + +/*! + * \brief GpioIoeInterruptHandler callback function. + */ +void GpioIoeInterruptHandler( void ); + +#endif // __GPIO_IOE_H__ diff --git a/src/peripherals/lis3dh.c b/src/peripherals/lis3dh.c new file mode 100755 index 0000000..5966e45 --- /dev/null +++ b/src/peripherals/lis3dh.c @@ -0,0 +1,1919 @@ +/* Copyright (c) [2014 Baidu]. All Rights Reserved. +* Licensed under the Apache License, Version 2.0 (the "License"); +* you may not use this file except in compliance with the License. +* You may obtain a copy of the License at + +http://www.apache.org/licenses/LICENSE-2.0 + +* Unless required by applicable law or agreed to in writing, software +* distributed under the License is distributed on an "AS IS" BASIS, +* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +* See the License for the specific language governing permissions and +* limitations under the License. +* +* File Name : +* Author : +* Version : $Revision:$ +* Date : $Date:$ +* Description : +* +* HISTORY: +* Date | Modification | Author +* 28/03/2014 | Initial Revision | + +*/ + +/* Includes ------------------------------------------------------------------*/ +#include "lis3dh.h" +#include "board.h" + +#define FIFO_STREAM_MODE +#define LIS3DH_ODR_FREQ LIS3DH_ODR_10Hz + +#define ASSERT(_cond_) + +I2c_t Lis3dh_i2c; +Gpio_t Lis3dh_int1; +Gpio_t Lis3dh_int2; + +bool IntDetected = false; + +/******************************************************************************* +* Function Name : LIS3DH_ReadReg +* Description : Generic Reading function. It must be fullfilled with either +* : I2C or SPI reading functions +* Input : Register Address +* Output : Data REad +* Return : None +*******************************************************************************/ +bool LIS3DH_ReadReg(uint8_t Reg, uint8_t* Data) +{ + int ret; + uint8_t Read_Reg = Reg | LIS3DH_READBIT; + //uint8_t Read_Reg = Reg ; + + ret = I2cReadBuffer( &Lis3dh_i2c, 0x32, Read_Reg, Data, 1 ); + if (ret !=SUCCESS) { + printf("LIS3DH no ack\r\n"); + } + + return true; +} + +/******************************************************************************* +* Function Name : LIS3DH_WriteReg +* Description : Generic Writing function. It must be fullfilled with either +* : I2C or SPI writing function +* Input : Register Address, Data to be written +* Output : None +* Return : None +*******************************************************************************/ +u8_t LIS3DH_WriteReg(uint8_t WriteAddr, uint8_t Data) +{ + int ret; + + ret = I2cWriteBuffer( &Lis3dh_i2c, 0x32, WriteAddr, (uint8_t *)&Data, 1 ); + if (ret !=SUCCESS) { + printf("LIS3DH no ack\r\n"); + } + + return true; +} + +void Lis3dh_Event( void ) +{ + IntDetected = true; +} + +void Lis3dh_IntEventClear( void ) +{ + u8_t src; + + LIS3DH_GetInt1Src(&src); + printf("Move Detected INT1 src:0x%02x\r\n", src); +} + +uint8_t Lis3dhGetIntState( void ) +{ +#if 0 + return (GpioRead( &Lis3dh_int1) == 0); +#else + bool state = false; + BoardDisableIrq( ); + state = IntDetected; + IntDetected = false; + BoardEnableIrq( ); + return state; +#endif +} + +uint8_t LIS3DH_Init(void) +{ + uint8_t whoami; + + I2cInit( &Lis3dh_i2c, I2C_SCL, I2C_SDA ); + + GpioInit( &Lis3dh_int1, LIS3DH_INT1_PIN, PIN_INPUT, PIN_PUSH_PULL, PIN_NO_PULL, 0 ); + GpioInit( &Lis3dh_int2, LIS3DH_INT2_PIN, PIN_INPUT, PIN_PUSH_PULL, PIN_NO_PULL, 0 ); + GpioSetInterrupt( &Lis3dh_int1, IRQ_FALLING_EDGE, IRQ_VERY_LOW_PRIORITY, &Lis3dh_Event ); + + DelayMs(10); + + /*¶ĂĂˆÂ¡WHO_AM_IÅöĂLIS3DHĂÇ·ñ´æÔà */ + LIS3DH_ReadReg(LIS3DH_WHO_AM_I,&whoami); + if(whoami != 0x33) + { + printf("LIS3DH is not found!\r\n"); + return 0; + } + + // Enable Temp + LIS3DH_SetTemperature(MEMS_ENABLE); + // ODR = 100 Hz and enable X, Y, and Z + LIS3DH_SetODR(LIS3DH_ODR_FREQ); + LIS3DH_SetAxis(LIS3DH_X_ENABLE | LIS3DH_Y_ENABLE | LIS3DH_Z_ENABLE); + // Normal mode + LIS3DH_SetMode(LIS3DH_LOW_POWER); + // High-pass filter enabled on interrupt activity 1 + LIS3DH_SetFilterDataSel(MEMS_ENABLE); + LIS3DH_HPFAOI1Enable(MEMS_ENABLE); + // Interrupt activity 1 driven to INT1 pad + LIS3DH_SetInt1Pin(LIS3DH_I1_INT1_ON_PIN_INT1_ENABLE); + // BDU set for temp, FS = 2g + LIS3DH_SetBDU(MEMS_ENABLE); + LIS3DH_SetFullScale(LIS3DH_FULLSCALE_2); + // Interrupt 1 pin latched + LIS3DH_Int1LatchEnable(MEMS_ENABLE); + // active-low + LIS3DH_SetInt2Pin(LIS3DH_INT_ACTIVE_LOW); + // Threshold = 125 mg + LIS3DH_SetInt1Threshold(0x08); + LIS3DH_SetInt1Duration(0x00); + // Enable XH and YH interrupt generation + LIS3DH_SetIntMode(LIS3DH_INT_MODE_6D_MOVEMENT); + LIS3DH_SetInt6D4DConfiguration(LIS3DH_INT1_6D_ENABLE); + LIS3DH_SetIntConfiguration(LIS3DH_INT1_ZHIE_ENABLE | LIS3DH_INT1_ZLIE_ENABLE | + LIS3DH_INT1_YHIE_ENABLE | LIS3DH_INT1_YLIE_ENABLE | + LIS3DH_INT1_XHIE_ENABLE | LIS3DH_INT1_XLIE_ENABLE); + +#ifdef FIFO_STREAM_MODE + //LIS3DH_FIFOModeEnable(LIS3DH_FIFO_STREAM_MODE); +#else + //LIS3DH_FIFOModeEnable(LIS3DH_FIFO_MODE); +#endif + + return true; +} +/******************************************************************************* +* Function Name : LIS3DH_GetStatusAUX +* Description : Read the AUX status register +* Input : Char to empty by status register buffer +* Output : None +* Return : Status [MEMS_ERROR, MEMS_SUCCESS] +*******************************************************************************/ +status_t LIS3DH_GetStatusAUX(u8_t* val) +{ + + if( !LIS3DH_ReadReg(LIS3DH_STATUS_AUX, val) ) + return MEMS_ERROR; + + return MEMS_SUCCESS; +} + +/******************************************************************************* +* Function Name : LIS3DH_GetStatusAUXBIT +* Description : Read the AUX status register BIT +* Input : LIS3DH_STATUS_AUX_321OR, LIS3DH_STATUS_AUX_3OR, LIS3DH_STATUS_AUX_2OR, LIS3DH_STATUS_AUX_1OR, +LIS3DH_STATUS_AUX_321DA, LIS3DH_STATUS_AUX_3DA, LIS3DH_STATUS_AUX_2DA, LIS3DH_STATUS_AUX_1DA +* Output : None +* Return : Status of BIT [MEMS_ERROR, MEMS_SUCCESS] +*******************************************************************************/ +status_t LIS3DH_GetStatusAUXBit(u8_t statusBIT, u8_t* val) +{ + u8_t value; + + if( !LIS3DH_ReadReg(LIS3DH_STATUS_AUX, &value) ) + return MEMS_ERROR; + + if(statusBIT == LIS3DH_STATUS_AUX_321OR) { + if(value &= LIS3DH_STATUS_AUX_321OR) { + *val = MEMS_SET; + return MEMS_SUCCESS; + } else { + *val = MEMS_RESET; + return MEMS_SUCCESS; + } + } + + if(statusBIT == LIS3DH_STATUS_AUX_3OR) { + if(value &= LIS3DH_STATUS_AUX_3OR) { + *val = MEMS_SET; + return MEMS_SUCCESS; + } else { + *val = MEMS_RESET; + return MEMS_SUCCESS; + } + } + + if(statusBIT == LIS3DH_STATUS_AUX_2OR) { + if(value &= LIS3DH_STATUS_AUX_2OR) { + *val = MEMS_SET; + return MEMS_SUCCESS; + } else { + *val = MEMS_RESET; + return MEMS_SUCCESS; + } + } + + if(statusBIT == LIS3DH_STATUS_AUX_1OR) { + if(value &= LIS3DH_STATUS_AUX_1OR) { + *val = MEMS_SET; + return MEMS_SUCCESS; + } else { + *val = MEMS_RESET; + return MEMS_SUCCESS; + } + } + + if(statusBIT == LIS3DH_STATUS_AUX_321DA) { + if(value &= LIS3DH_STATUS_AUX_321DA) { + *val = MEMS_SET; + return MEMS_SUCCESS; + } else { + *val = MEMS_RESET; + return MEMS_SUCCESS; + } + } + + if(statusBIT == LIS3DH_STATUS_AUX_3DA) { + if(value &= LIS3DH_STATUS_AUX_3DA) { + *val = MEMS_SET; + return MEMS_SUCCESS; + } else { + *val = MEMS_RESET; + return MEMS_SUCCESS; + } + } + + if(statusBIT == LIS3DH_STATUS_AUX_2DA) { + if(value &= LIS3DH_STATUS_AUX_2DA) { + *val = MEMS_SET; + return MEMS_SUCCESS; + } else { + *val = MEMS_RESET; + return MEMS_SUCCESS; + } + } + + if(statusBIT == LIS3DH_STATUS_AUX_1DA) { + if(value &= LIS3DH_STATUS_AUX_1DA) { + *val = MEMS_SET; + return MEMS_SUCCESS; + } else { + *val = MEMS_RESET; + return MEMS_SUCCESS; + } + } + return MEMS_ERROR; +} + + +/******************************************************************************* +* Function Name : LIS3DH_SetODR +* Description : Sets LIS3DH Output Data Rate +* Input : Output Data Rate +* Output : None +* Return : Status [MEMS_ERROR, MEMS_SUCCESS] +*******************************************************************************/ +status_t LIS3DH_SetODR(LIS3DH_ODR_t ov) +{ + u8_t value; + + if( !LIS3DH_ReadReg(LIS3DH_CTRL_REG1, &value) ) + return MEMS_ERROR; + + value &= 0x0f; + value |= ov<AUX_1 = (u16_t)( (valueH << 8) | valueL )/16; + + if( !LIS3DH_ReadReg(LIS3DH_OUT_2_L, &valueL) ) + return MEMS_ERROR; + + if( !LIS3DH_ReadReg(LIS3DH_OUT_2_H, &valueH) ) + return MEMS_ERROR; + + buff->AUX_2 = (u16_t)( (valueH << 8) | valueL )/16; + + if( !LIS3DH_ReadReg(LIS3DH_OUT_3_L, &valueL) ) + return MEMS_ERROR; + + if( !LIS3DH_ReadReg(LIS3DH_OUT_3_H, &valueH) ) + return MEMS_ERROR; + + buff->AUX_3 = (u16_t)( (valueH << 8) | valueL )/16; + + return MEMS_SUCCESS; +} + + +/******************************************************************************* +* Function Name : LIS3DH_GetTempRaw +* Description : Read the Temperature Values by AUX Output Registers OUT_3_H +* Input : Buffer to empty +* Output : Temperature Values Registers buffer +* Return : Status [MEMS_ERROR, MEMS_SUCCESS] +*******************************************************************************/ +status_t LIS3DH_GetTempRaw(i8_t* buff) +{ + u8_t valueL; + u8_t valueH; + + if( !LIS3DH_ReadReg(LIS3DH_OUT_3_L, &valueL) ) + return MEMS_ERROR; + + if( !LIS3DH_ReadReg(LIS3DH_OUT_3_H, &valueH) ) + return MEMS_ERROR; + + *buff = (i8_t)( valueH ); + + return MEMS_SUCCESS; +} + + +/******************************************************************************* +* Function Name : LIS3DH_SetMode +* Description : Sets LIS3DH Operating Mode +* Input : Modality (LIS3DH_NORMAL, LIS3DH_LOW_POWER, LIS3DH_POWER_DOWN) +* Output : None +* Return : Status [MEMS_ERROR, MEMS_SUCCESS] +*******************************************************************************/ +status_t LIS3DH_SetMode(LIS3DH_Mode_t md) +{ + u8_t value; + u8_t value2; + static u8_t ODR_old_value; + + if( !LIS3DH_ReadReg(LIS3DH_CTRL_REG1, &value) ) + return MEMS_ERROR; + + if( !LIS3DH_ReadReg(LIS3DH_CTRL_REG4, &value2) ) + return MEMS_ERROR; + + if((value & 0xF0)==0) + value = value | (ODR_old_value & 0xF0); //if it comes from POWERDOWN + + switch(md) { + + case LIS3DH_POWER_DOWN: + ODR_old_value = value; + value &= 0x0F; + break; + + case LIS3DH_NORMAL: + value &= 0xF7; + value |= (MEMS_RESET< 3) + return MEMS_ERROR; + + if( !LIS3DH_ReadReg(LIS3DH_CTRL_REG2, &value) ) + return MEMS_ERROR; + + value &= 0xCF; + value |= (hpf<127) + return MEMS_ERROR; + + if( !LIS3DH_WriteReg(LIS3DH_CLICK_THS, ths) ) + return MEMS_ERROR; + + return MEMS_SUCCESS; +} + + +/******************************************************************************* +* Function Name : LIS3DH_SetClickLIMIT +* Description : Set Click Interrupt Time Limit +* Input : Click-click Time Limit value [0-127] +* Output : None +* Return : Status [MEMS_ERROR, MEMS_SUCCESS] +*******************************************************************************/ +status_t LIS3DH_SetClickLIMIT(u8_t t_limit) +{ + + if(t_limit>127) + return MEMS_ERROR; + + if( !LIS3DH_WriteReg(LIS3DH_TIME_LIMIT, t_limit) ) + return MEMS_ERROR; + + return MEMS_SUCCESS; +} + + +/******************************************************************************* +* Function Name : LIS3DH_SetClickLATENCY +* Description : Set Click Interrupt Time Latency +* Input : Click-click Time Latency value [0-255] +* Output : None +* Return : Status [MEMS_ERROR, MEMS_SUCCESS] +*******************************************************************************/ +status_t LIS3DH_SetClickLATENCY(u8_t t_latency) +{ + + if( !LIS3DH_WriteReg(LIS3DH_TIME_LATENCY, t_latency) ) + return MEMS_ERROR; + + return MEMS_SUCCESS; +} + + +/******************************************************************************* +* Function Name : LIS3DH_SetClickWINDOW +* Description : Set Click Interrupt Time Window +* Input : Click-click Time Window value [0-255] +* Output : None +* Return : Status [MEMS_ERROR, MEMS_SUCCESS] +*******************************************************************************/ +status_t LIS3DH_SetClickWINDOW(u8_t t_window) +{ + + if( !LIS3DH_WriteReg(LIS3DH_TIME_WINDOW, t_window) ) + return MEMS_ERROR; + + return MEMS_SUCCESS; +} + + +/******************************************************************************* +* Function Name : LIS3DH_GetClickResponse +* Description : Get Click Interrupt Response by CLICK_SRC REGISTER +* Input : char to empty by Click Response Typedef +* Output : None +* Return : Status [MEMS_ERROR, MEMS_SUCCESS] +*******************************************************************************/ +status_t LIS3DH_GetClickResponse(u8_t* res) +{ + u8_t value; + + if( !LIS3DH_ReadReg(LIS3DH_CLICK_SRC, &value) ) + return MEMS_ERROR; + + value &= 0x7F; + + if((value & LIS3DH_IA)==0) { + *res = LIS3DH_NO_CLICK; + return MEMS_SUCCESS; + } else { + if (value & LIS3DH_DCLICK) { + if (value & LIS3DH_CLICK_SIGN) { + if (value & LIS3DH_CLICK_Z) { + *res = LIS3DH_DCLICK_Z_N; + return MEMS_SUCCESS; + } + if (value & LIS3DH_CLICK_Y) { + *res = LIS3DH_DCLICK_Y_N; + return MEMS_SUCCESS; + } + if (value & LIS3DH_CLICK_X) { + *res = LIS3DH_DCLICK_X_N; + return MEMS_SUCCESS; + } + } else { + if (value & LIS3DH_CLICK_Z) { + *res = LIS3DH_DCLICK_Z_P; + return MEMS_SUCCESS; + } + if (value & LIS3DH_CLICK_Y) { + *res = LIS3DH_DCLICK_Y_P; + return MEMS_SUCCESS; + } + if (value & LIS3DH_CLICK_X) { + *res = LIS3DH_DCLICK_X_P; + return MEMS_SUCCESS; + } + } + } else { + if (value & LIS3DH_CLICK_SIGN) { + if (value & LIS3DH_CLICK_Z) { + *res = LIS3DH_SCLICK_Z_N; + return MEMS_SUCCESS; + } + if (value & LIS3DH_CLICK_Y) { + *res = LIS3DH_SCLICK_Y_N; + return MEMS_SUCCESS; + } + if (value & LIS3DH_CLICK_X) { + *res = LIS3DH_SCLICK_X_N; + return MEMS_SUCCESS; + } + } else { + if (value & LIS3DH_CLICK_Z) { + *res = LIS3DH_SCLICK_Z_P; + return MEMS_SUCCESS; + } + if (value & LIS3DH_CLICK_Y) { + *res = LIS3DH_SCLICK_Y_P; + return MEMS_SUCCESS; + } + if (value & LIS3DH_CLICK_X) { + *res = LIS3DH_SCLICK_X_P; + return MEMS_SUCCESS; + } + } + } + } + return MEMS_ERROR; +} +/******************************************************************************* +* Function Name : LIS3DH_Int1LatchEnable +* Description : reboot sensor, reset mem registers function +* Input : ENABLE/DISABLE +* Output : None +* Return : Status [MEMS_ERROR, MEMS_SUCCESS] +*******************************************************************************/ +status_t LIS3DH_RESET_MEM(void) +{ + u8_t value; + + if( !LIS3DH_ReadReg(LIS3DH_CTRL_REG5, &value) ) + return MEMS_ERROR; + + value &= 0x7F; + value |= 1< 127) + return MEMS_ERROR; + + if( !LIS3DH_WriteReg(LIS3DH_INT1_THS, ths) ) + return MEMS_ERROR; + + return MEMS_SUCCESS; +} + + +/******************************************************************************* +* Function Name : LIS3DH_SetInt1Duration +* Description : Sets Interrupt 1 Duration +* Input : Duration value +* Output : None +* Return : Status [MEMS_ERROR, MEMS_SUCCESS] +*******************************************************************************/ +status_t LIS3DH_SetInt1Duration(LIS3DH_Int1Conf_t id) +{ + + if (id > 127) + return MEMS_ERROR; + + if( !LIS3DH_WriteReg(LIS3DH_INT1_DURATION, id) ) + return MEMS_ERROR; + + return MEMS_SUCCESS; +} + + +/******************************************************************************* +* Function Name : LIS3DH_FIFOModeEnable +* Description : Sets Fifo Modality +* Input : LIS3DH_FIFO_DISABLE, LIS3DH_FIFO_BYPASS_MODE, LIS3DH_FIFO_MODE, +LIS3DH_FIFO_STREAM_MODE, LIS3DH_FIFO_TRIGGER_MODE +* Output : None +* Return : Status [MEMS_ERROR, MEMS_SUCCESS] +*******************************************************************************/ +status_t LIS3DH_FIFOModeEnable(LIS3DH_FifoMode_t fm) +{ + u8_t value; + + if(fm == LIS3DH_FIFO_DISABLE) { + if( !LIS3DH_ReadReg(LIS3DH_FIFO_CTRL_REG, &value) ) + return MEMS_ERROR; + + value &= 0x1F; + value |= (LIS3DH_FIFO_BYPASS_MODE< 31) + return MEMS_ERROR; + + if( !LIS3DH_ReadReg(LIS3DH_FIFO_CTRL_REG, &value) ) + return MEMS_ERROR; + + value &= 0xE0; + value |= wtm; + + if( !LIS3DH_WriteReg(LIS3DH_FIFO_CTRL_REG, value) ) + return MEMS_ERROR; + + return MEMS_SUCCESS; +} + + +/******************************************************************************* +* Function Name : LIS3DH_GetStatusReg +* Description : Read the status register +* Input : char to empty by Status Reg Value +* Output : None +* Return : Status [MEMS_ERROR, MEMS_SUCCESS] +*******************************************************************************/ +status_t LIS3DH_GetStatusReg(u8_t* val) +{ + if( !LIS3DH_ReadReg(LIS3DH_STATUS_REG, val) ) + return MEMS_ERROR; + + return MEMS_SUCCESS; +} + + +/******************************************************************************* +* Function Name : LIS3DH_GetStatusBIT +* Description : Read the status register BIT +* Input : LIS3DH_STATUS_REG_ZYXOR, LIS3DH_STATUS_REG_ZOR, LIS3DH_STATUS_REG_YOR, LIS3DH_STATUS_REG_XOR, +LIS3DH_STATUS_REG_ZYXDA, LIS3DH_STATUS_REG_ZDA, LIS3DH_STATUS_REG_YDA, LIS3DH_STATUS_REG_XDA, +LIS3DH_DATAREADY_BIT +val: Byte to be filled with the status bit +* Output : status register BIT +* Return : Status [MEMS_ERROR, MEMS_SUCCESS] +*******************************************************************************/ +status_t LIS3DH_GetStatusBit(u8_t statusBIT, u8_t* val) +{ + u8_t value; + + if( !LIS3DH_ReadReg(LIS3DH_STATUS_REG, &value) ) + return MEMS_ERROR; + + switch (statusBIT) { + case LIS3DH_STATUS_REG_ZYXOR: + if(value &= LIS3DH_STATUS_REG_ZYXOR) { + *val = MEMS_SET; + return MEMS_SUCCESS; + } else { + *val = MEMS_RESET; + return MEMS_SUCCESS; + } + case LIS3DH_STATUS_REG_ZOR: + if(value &= LIS3DH_STATUS_REG_ZOR) { + *val = MEMS_SET; + return MEMS_SUCCESS; + } else { + *val = MEMS_RESET; + return MEMS_SUCCESS; + } + case LIS3DH_STATUS_REG_YOR: + if(value &= LIS3DH_STATUS_REG_YOR) { + *val = MEMS_SET; + return MEMS_SUCCESS; + } else { + *val = MEMS_RESET; + return MEMS_SUCCESS; + } + case LIS3DH_STATUS_REG_XOR: + if(value &= LIS3DH_STATUS_REG_XOR) { + *val = MEMS_SET; + return MEMS_SUCCESS; + } else { + *val = MEMS_RESET; + return MEMS_SUCCESS; + } + case LIS3DH_STATUS_REG_ZYXDA: + if(value &= LIS3DH_STATUS_REG_ZYXDA) { + *val = MEMS_SET; + return MEMS_SUCCESS; + } else { + *val = MEMS_RESET; + return MEMS_SUCCESS; + } + case LIS3DH_STATUS_REG_ZDA: + if(value &= LIS3DH_STATUS_REG_ZDA) { + *val = MEMS_SET; + return MEMS_SUCCESS; + } else { + *val = MEMS_RESET; + return MEMS_SUCCESS; + } + case LIS3DH_STATUS_REG_YDA: + if(value &= LIS3DH_STATUS_REG_YDA) { + *val = MEMS_SET; + return MEMS_SUCCESS; + } else { + *val = MEMS_RESET; + return MEMS_SUCCESS; + } + case LIS3DH_STATUS_REG_XDA: + if(value &= LIS3DH_STATUS_REG_XDA) { + *val = MEMS_SET; + return MEMS_SUCCESS; + } else { + *val = MEMS_RESET; + return MEMS_SUCCESS; + } + + } + return MEMS_ERROR; +} + +/******************************************************************************* +* Function Name : LIS3DH_GetAccAxesRaw +* Description : Read the Acceleration Values Output Registers +* Input : buffer to empity by AxesRaw_t Typedef +* Output : None +* Return : Status [MEMS_ERROR, MEMS_SUCCESS] +*******************************************************************************/ +status_t LIS3DH_GetAccAxesRaw(AxesRaw_t* buff) +{ + int16_t value; + u8_t *valueL = (u8_t *)(&value); + u8_t *valueH = ((u8_t *)(&value)+1); + + if( !LIS3DH_ReadReg(LIS3DH_OUT_X_L, valueL) ) + return MEMS_ERROR; + + if( !LIS3DH_ReadReg(LIS3DH_OUT_X_H, valueH) ) + return MEMS_ERROR; + + buff->AXIS_X = value; + + if( !LIS3DH_ReadReg(LIS3DH_OUT_Y_L, valueL) ) + return MEMS_ERROR; + + if( !LIS3DH_ReadReg(LIS3DH_OUT_Y_H, valueH) ) + return MEMS_ERROR; + + buff->AXIS_Y = value; + + if( !LIS3DH_ReadReg(LIS3DH_OUT_Z_L, valueL) ) + return MEMS_ERROR; + + if( !LIS3DH_ReadReg(LIS3DH_OUT_Z_H, valueH) ) + return MEMS_ERROR; + + buff->AXIS_Z = value; + + return MEMS_SUCCESS; + + + /* + if( !LIS3DH_ReadReg(LIS3DH_OUT_X_L, valueL) ) + return MEMS_ERROR; + + if( !LIS3DH_ReadReg(LIS3DH_OUT_X_H, valueH) ) + return MEMS_ERROR; + + buff->AXIS_X = value; + + if( !LIS3DH_ReadReg(LIS3DH_OUT_Y_L, valueL) ) + return MEMS_ERROR; + + if( !LIS3DH_ReadReg(LIS3DH_OUT_Y_H, valueH) ) + return MEMS_ERROR; + + buff->AXIS_Y = value; + + if( !LIS3DH_ReadReg(LIS3DH_OUT_Z_L, valueL) ) + return MEMS_ERROR; + + if( !LIS3DH_ReadReg(LIS3DH_OUT_Z_H, valueH) ) + return MEMS_ERROR; + + buff->AXIS_Z = value; + */ + +} + + +/******************************************************************************* +* Function Name : LIS3DH_GetInt1Src +* Description : Reset Interrupt 1 Latching function +* Input : Char to empty by Int1 source value +* Output : None +* Return : Status [MEMS_ERROR, MEMS_SUCCESS] +*******************************************************************************/ +status_t LIS3DH_GetInt1Src(u8_t* val) +{ + + if( !LIS3DH_ReadReg(LIS3DH_INT1_SRC, val) ) + return MEMS_ERROR; + + return MEMS_SUCCESS; +} + + +/******************************************************************************* +* Function Name : LIS3DH_GetInt1SrcBit +* Description : Reset Interrupt 1 Latching function +* Input : statusBIT: LIS3DH_INT_SRC_IA, LIS3DH_INT_SRC_ZH, LIS3DH_INT_SRC_ZL..... +* val: Byte to be filled with the status bit +* Output : None +* Return : Status of BIT [MEMS_ERROR, MEMS_SUCCESS] +*******************************************************************************/ +status_t LIS3DH_GetInt1SrcBit(u8_t statusBIT, u8_t* val) +{ + u8_t value; + + if( !LIS3DH_ReadReg(LIS3DH_INT1_SRC, &value) ) + return MEMS_ERROR; + + if(statusBIT == LIS3DH_INT1_SRC_IA) { + if(value &= LIS3DH_INT1_SRC_IA) { + *val = MEMS_SET; + return MEMS_SUCCESS; + } else { + *val = MEMS_RESET; + return MEMS_SUCCESS; + } + } + + if(statusBIT == LIS3DH_INT1_SRC_ZH) { + if(value &= LIS3DH_INT1_SRC_ZH) { + *val = MEMS_SET; + return MEMS_SUCCESS; + } else { + *val = MEMS_RESET; + return MEMS_SUCCESS; + } + } + + if(statusBIT == LIS3DH_INT1_SRC_ZL) { + if(value &= LIS3DH_INT1_SRC_ZL) { + *val = MEMS_SET; + return MEMS_SUCCESS; + } else { + *val = MEMS_RESET; + return MEMS_SUCCESS; + } + } + + if(statusBIT == LIS3DH_INT1_SRC_YH) { + if(value &= LIS3DH_INT1_SRC_YH) { + *val = MEMS_SET; + return MEMS_SUCCESS; + } else { + *val = MEMS_RESET; + return MEMS_SUCCESS; + } + } + + if(statusBIT == LIS3DH_INT1_SRC_YL) { + if(value &= LIS3DH_INT1_SRC_YL) { + *val = MEMS_SET; + return MEMS_SUCCESS; + } else { + *val = MEMS_RESET; + return MEMS_SUCCESS; + } + } + if(statusBIT == LIS3DH_INT1_SRC_XH) { + if(value &= LIS3DH_INT1_SRC_XH) { + *val = MEMS_SET; + return MEMS_SUCCESS; + } else { + *val = MEMS_RESET; + return MEMS_SUCCESS; + } + } + + if(statusBIT == LIS3DH_INT1_SRC_XL) { + if(value &= LIS3DH_INT1_SRC_XL) { + *val = MEMS_SET; + return MEMS_SUCCESS; + } else { + *val = MEMS_RESET; + return MEMS_SUCCESS; + } + } + return MEMS_ERROR; +} + + +/******************************************************************************* +* Function Name : LIS3DH_GetFifoSourceReg +* Description : Read Fifo source Register +* Input : Byte to empty by FIFO source register value +* Output : None +* Return : Status [MEMS_ERROR, MEMS_SUCCESS] +*******************************************************************************/ +status_t LIS3DH_GetFifoSourceReg(u8_t* val) +{ + + if( !LIS3DH_ReadReg(LIS3DH_FIFO_SRC_REG, val) ) + return MEMS_ERROR; + + return MEMS_SUCCESS; +} + + +/******************************************************************************* +* Function Name : LIS3DH_GetFifoSourceBit +* Description : Read Fifo WaterMark source bit +* Input : statusBIT: LIS3DH_FIFO_SRC_WTM, LIS3DH_FIFO_SRC_OVRUN, LIS3DH_FIFO_SRC_EMPTY +* val: Byte to fill with the bit value +* Output : None +* Return : Status of BIT [MEMS_ERROR, MEMS_SUCCESS] +*******************************************************************************/ +status_t LIS3DH_GetFifoSourceBit(u8_t statusBIT, u8_t* val) +{ + u8_t value; + + if( !LIS3DH_ReadReg(LIS3DH_FIFO_SRC_REG, &value) ) + return MEMS_ERROR; + + + if(statusBIT == LIS3DH_FIFO_SRC_WTM) { + if(value &= LIS3DH_FIFO_SRC_WTM) { + *val = MEMS_SET; + return MEMS_SUCCESS; + } else { + *val = MEMS_RESET; + return MEMS_SUCCESS; + } + } + + if(statusBIT == LIS3DH_FIFO_SRC_OVRUN) { + if(value &= LIS3DH_FIFO_SRC_OVRUN) { + *val = MEMS_SET; + return MEMS_SUCCESS; + } else { + *val = MEMS_RESET; + return MEMS_SUCCESS; + } + } + if(statusBIT == LIS3DH_FIFO_SRC_EMPTY) { + if(value &= statusBIT == LIS3DH_FIFO_SRC_EMPTY) { + *val = MEMS_SET; + return MEMS_SUCCESS; + } else { + *val = MEMS_RESET; + return MEMS_SUCCESS; + } + } + return MEMS_ERROR; +} + + +/******************************************************************************* +* Function Name : LIS3DH_GetFifoSourceFSS +* Description : Read current number of unread samples stored in FIFO +* Input : Byte to empty by FIFO unread sample value +* Output : None +* Return : Status [value of FSS] +*******************************************************************************/ +status_t LIS3DH_GetFifoSourceFSS(u8_t* val) +{ + u8_t value; + + if( !LIS3DH_ReadReg(LIS3DH_FIFO_SRC_REG, &value) ) + return MEMS_ERROR; + + value &= 0x1F; + + *val = value; + + return MEMS_SUCCESS; +} + +/******************************************************************************* +* Function Name : LIS3DH_SetSPIInterface +* Description : Set SPI mode: 3 Wire Interface OR 4 Wire Interface +* Input : LIS3DH_SPI_3_WIRE, LIS3DH_SPI_4_WIRE +* Output : None +* Return : Status [MEMS_ERROR, MEMS_SUCCESS] +*******************************************************************************/ +status_t LIS3DH_SetSPIInterface(LIS3DH_SPIMode_t spi) +{ + u8_t value; + + if( !LIS3DH_ReadReg(LIS3DH_CTRL_REG4, &value) ) + return MEMS_ERROR; + + value &= 0xFE; + value |= spi<g'range selection 00-->2g;01-->4g;10-->8g;11-->16g: + // HR = 1 --> high resolution + // SIM -->if ==1 serial interface mode is selected(SPI) + + /* Settings for CTRL_REG4 Enable block update and set range to +/-2G */ + ASSERT(LIS3DH_WriteReg(LIS3DH_CTRL_REG4, 0x08)); + + + // ASSERT(LIS3DH_WriteReg(LIS3DH_CTRL_REG5, 0x80)); + /* LIS3DH_CTRL_REG4_BLOCKDATAUPDATE Enable block update */ + // LIS3DH_CTRL_REG4_SCALE_2G)); /* +/-2G measurement range */ + +#ifdef TESTFIFO + // Settings for CTRL_REG5: + // ---------------------------------------------------------------------------------------- + //CTRL_REG5| 7 6 5 4 3 2 1 0 | + // | BOOT FIFO_EN -- -- LIR_INT1 D4D_INT1 0 0 | + // ---------------------------------------------------------------------------------------- + ASSERT(LIS3DH_WriteReg( LIS3DH_CTRL_REG5 , + BIT_6 | /*Enable FIFO*/ + BIT_3 /*lATCH INTERRUPT request on INT1_SRC register, with INT1_SRC register cleared by reading INT1_SRC itself*/ + + )); + + //---TESTING CLICK WITH CTRL_REG_6: + // Settings for CTRL_REG6: + // --------------------------------------------------------------------------------------------- + //CTRL_REG6| 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | + // | I2_CLICKen | I2_INT1 | 0 | BOOT_I1 | 0 | | H_L-ACTIVE | -- | + // --------------------------------------------------------------------------------------------- + + ASSERT(LIS3DH_WriteReg(LIS3DH_CTRL_REG6 , + BIT_7 | BIT_6)); /* enable tap and double tap interruppts on INT2 pin*/ + + // ---------------------------------------------------------------------------------------- + //CLICK_CFG| 7 6 5 4 3 2 1 0 | + // | -- -- ZD(DOUB) ZS(SING) YD YS XD XS | + // ---------------------------------------------------------------------------------------- + ASSERT(LIS3DH_WriteReg( LIS3DH_CLICK_CFG , + BIT_5));//Enable interrupt double CLICK-CLICK on Z axis enable interrupt request on measured accel. value higher than preset threshold + + //CLICK_THS + //Threshold for click detection (arbitary value) 1LSb = fullscale/128 + + ASSERT(LIS3DH_WriteReg( LIS3DH_CLICK_THS , 0x03 )); + + //TIME_LIMIT + //Time limit a short time frame where in which click is recognised when + //1.corresponding value in that axis exceeds threshold and + // 2.comes below threshold. + // To get detected both should happen in this time limit. + ASSERT(LIS3DH_WriteReg( LIS3DH_TIME_LIMIT , 0x33 )); + + ASSERT(LIS3DH_WriteReg( LIS3DH_TIME_LATENCY , 0xFF )); + + + + /* Enable FIFO */ + ASSERT(LIS3DH_WriteReg(LIS3DH_FIFO_CTRL_REG, + BIT_6 /* FIFO MODE, trigger signal on INT1 */ + )); + + /* Enable interrupt */ + ASSERT(LIS3DH_WriteReg(LIS3DH_INT1_CFG, + BIT_6 /* FIFO MODE, trigger signal on INT1 */ + )); +#endif + // Settings for INT1_CFG + // defaults + + // Settings for INT1_THS + // defaults + + // Settings for INT1_DUR + // Defaults + + return true; +} +/**************************************************************************/ +/*! +@brief Initialises the SPI block +1+196 bytes +197*8 = 1576bits +1576 /(8*1024*1024)=0.188ms + +*/ +/**************************************************************************/ +#define TESTFIFO 1 + +#if 0 +bool LIS3DH_test() +{ + uint8_t index; + uint8_t values[256]; + uint32_t pg_size; + //ASSERT(LIS3DH_WriteReg(LIS3DH_CTRL_REG2,0)); + while(1) { + //ASSERT(LIS3DH_WriteReg(LIS3DH_CTRL_REG2,ii)); + for(index = 0;index <20; index ++) { + ASSERT(LIS3DH_ReadReg(LIS3DH_CTRL_REG1+index,values+index)); + //simple_uart_put(values[index]); + } + for(pg_size = 0xfffff; pg_size > 0; pg_size --) + ; + /* + for(index = 0;index <6; index ++) + { + ASSERT(LIS3DH_ReadReg(LIS3DH_OUT_X_L+index,acc+index)); + for(pg_size = 0xffff; pg_size > 0; pg_size --); + } + simple_uart_put(0x55); + simple_uart_put(acc[1]); + simple_uart_put(acc[3]); + simple_uart_put(acc[5]); + */ + + } + return true; + +} +#endif +/******************* (C) COPYRIGHT 2013 Bidu *****END OF FILE****/ diff --git a/src/peripherals/lis3dh.h b/src/peripherals/lis3dh.h new file mode 100755 index 0000000..709a06d --- /dev/null +++ b/src/peripherals/lis3dh.h @@ -0,0 +1,588 @@ +/* Copyright (c) [2014 Baidu]. All Rights Reserved. + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * File Name : + * Author : + * Version : $Revision:$ + * Date : $Date:$ + * Description : + * + * HISTORY: + * Date | Modification | Author + * 28/03/2014 | Initial Revision | + + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __LIS3DH_DRIVER__H +#define __LIS3DH_DRIVER__H +#include +#include + +/* Includes ------------------------------------------------------------------*/ +/* Exported types ------------------------------------------------------------*/ + +//these could change accordingly with the architecture + +#ifndef __ARCHDEP__TYPES +#define __ARCHDEP__TYPES + +typedef unsigned char u8_t; +typedef unsigned short int u16_t; +typedef short int i16_t; +typedef signed char i8_t; + +#endif /*__ARCHDEP__TYPES*/ + +typedef u8_t LIS3DH_IntPinConf_t; +typedef u8_t LIS3DH_Axis_t; +typedef u8_t LIS3DH_Int1Conf_t; +#define LIS3DH_FULLSCALE LIS3DH_FULLSCALE_4 + +#define LIS3DH_READBIT (0x80) +#define LIS3DH_MSBIT (0x40) +#define BIT_0 0x01 /**< The value of bit 0 */ +#define BIT_1 0x02 /**< The value of bit 1 */ +#define BIT_2 0x04 /**< The value of bit 2 */ +#define BIT_3 0x08 /**< The value of bit 3 */ +#define BIT_4 0x10 /**< The value of bit 4 */ +#define BIT_5 0x20 /**< The value of bit 5 */ +#define BIT_6 0x40 /**< The value of bit 6 */ +#define BIT_7 0x80 /**< The value of bit 7 */ + +// Bit twiddling keys for use with different registers +enum +{ + LIS3DH_STATUS_REG_ZYXDA = 0x08, // STATUS_REG: XYZ - sample ready + LIS3DH_STATUS_REG_ZYXOR = 0x80, // STATUS_REG: XYZ - new set of data has overwritten the previous ones + LIS3DH_CTRL_REG1_XEN = 0x01, // CTRL_REG1: X enable + LIS3DH_CTRL_REG1_YEN = 0x02, // CTRL_REG1: Y enable + LIS3DH_CTRL_REG1_ZEN = 0x04, // CTRL_REG1: Z enable + LIS3DH_CTRL_REG1_XYZEN = 0x07, // CTRL_REG1: X+Y+Z enable + LIS3DH_CTRL_REG1_LPEN = 0x08, // CTRL_REG1: Low power enable + LIS3DH_CTRL_REG1_DATARATE_POWERDOWN = 0x00, // CTRL_REG1: 0000 xxxx + LIS3DH_CTRL_REG1_DATARATE_1HZ = 0x10, // CTRL_REG1: 0001 xxxx + LIS3DH_CTRL_REG1_DATARATE_10HZ = 0x20, // CTRL_REG1: 0010 xxxx + LIS3DH_CTRL_REG1_DATARATE_25HZ = 0x30, // CTRL_REG1: 0011 xxxx + LIS3DH_CTRL_REG1_DATARATE_50HZ = 0x40, // CTRL_REG1: 0100 xxxx + LIS3DH_CTRL_REG1_DATARATE_100HZ = 0x50, // CTRL_REG1: 0101 xxxx + LIS3DH_CTRL_REG1_DATARATE_200HZ = 0x60, // CTRL_REG1: 0110 xxxx + LIS3DH_CTRL_REG1_DATARATE_400HZ = 0x70, // CTRL_REG1: 0111 xxxx + LIS3DH_CTRL_REG1_DATARATE_1500HZ = 0x80, // CTRL_REG1: 1000 xxxx + LIS3DH_CTRL_REG1_DATARATE_5000HZ = 0x90, // CTRL_REG1: 1001 xxxx + LIS3DH_CTRL_REG4_BLOCKDATAUPDATE = 0x80, // CTRL_REG4: 1xxx xxxx + LIS3DH_CTRL_REG4_SCALE_2G = 0x00, // CTRL_REG4: xx00 xxxx + LIS3DH_CTRL_REG4_SCALE_4G = 0x10, // CTRL_REG4: xx01 xxxx + LIS3DH_CTRL_REG4_SCALE_8G = 0x20, // CTRL_REG4: xx10 xxxx + LIS3DH_CTRL_REG4_SCALE_16G = 0x30, // CTRL_REG4: xx11 xxxx +}; + +//define structure +#ifndef __SHARED__TYPES +#define __SHARED__TYPES + +typedef enum { + MEMS_SUCCESS = 0x01, + MEMS_ERROR = 0x00 +} status_t; + +typedef enum { + MEMS_ENABLE = 0x01, + MEMS_DISABLE = 0x00 +} State_t; + +typedef struct +{ + i16_t AXIS_X; + i16_t AXIS_Y; + i16_t AXIS_Z; +} +AxesRaw_t; + +#endif /*__SHARED__TYPES*/ + +typedef enum { + LIS3DH_ODR_1Hz = 0x01, + LIS3DH_ODR_10Hz = 0x02, + LIS3DH_ODR_25Hz = 0x03, + LIS3DH_ODR_50Hz = 0x04, + LIS3DH_ODR_100Hz = 0x05, + LIS3DH_ODR_200Hz = 0x06, + LIS3DH_ODR_400Hz = 0x07, + LIS3DH_ODR_1620Hz_LP = 0x08, + LIS3DH_ODR_1344Hz_NP_5367HZ_LP = 0x09 +} LIS3DH_ODR_t; + +typedef enum { + LIS3DH_POWER_DOWN = 0x00, + LIS3DH_LOW_POWER = 0x01, + LIS3DH_NORMAL = 0x02 +} LIS3DH_Mode_t; + +typedef enum { + LIS3DH_HPM_NORMAL_MODE_RES = 0x00, + LIS3DH_HPM_REF_SIGNAL = 0x01, + LIS3DH_HPM_NORMAL_MODE = 0x02, + LIS3DH_HPM_AUTORESET_INT = 0x03 +} LIS3DH_HPFMode_t; + +typedef enum { + LIS3DH_HPFCF_0 = 0x00, + LIS3DH_HPFCF_1 = 0x01, + LIS3DH_HPFCF_2 = 0x02, + LIS3DH_HPFCF_3 = 0x03 +} LIS3DH_HPFCutOffFreq_t; + +typedef struct +{ + u16_t AUX_1; + u16_t AUX_2; + u16_t AUX_3; +} +LIS3DH_Aux123Raw_t; + +typedef enum { + LIS3DH_FULLSCALE_2 = 0x00, + LIS3DH_FULLSCALE_4 = 0x01, + LIS3DH_FULLSCALE_8 = 0x02, + LIS3DH_FULLSCALE_16 = 0x03 +} LIS3DH_Fullscale_t; + +typedef enum { + LIS3DH_BLE_LSB = 0x00, + LIS3DH_BLE_MSB = 0x01 +} LIS3DH_Endianess_t; + +typedef enum { + LIS3DH_SELF_TEST_DISABLE = 0x00, + LIS3DH_SELF_TEST_0 = 0x01, + LIS3DH_SELF_TEST_1 = 0x02 +} LIS3DH_SelfTest_t; + +typedef enum { + LIS3DH_FIFO_BYPASS_MODE = 0x00, + LIS3DH_FIFO_MODE = 0x01, + LIS3DH_FIFO_STREAM_MODE = 0x02, + LIS3DH_FIFO_TRIGGER_MODE = 0x03, + LIS3DH_FIFO_DISABLE = 0x04 +} LIS3DH_FifoMode_t; + +typedef enum { + LIS3DH_TRIG_INT1 = 0x00, + LIS3DH_TRIG_INT2 = 0x01 +} LIS3DH_TrigInt_t; + +typedef enum { + LIS3DH_SPI_4_WIRE = 0x00, + LIS3DH_SPI_3_WIRE = 0x01 +} LIS3DH_SPIMode_t; + +typedef enum { + LIS3DH_X_ENABLE = 0x01, + LIS3DH_X_DISABLE = 0x00, + LIS3DH_Y_ENABLE = 0x02, + LIS3DH_Y_DISABLE = 0x00, + LIS3DH_Z_ENABLE = 0x04, + LIS3DH_Z_DISABLE = 0x00 +} LIS3DH_AXISenable_t; + +typedef enum { + LIS3DH_INT1_6D_4D_DISABLE = 0x00, + LIS3DH_INT1_6D_ENABLE = 0x01, + LIS3DH_INT1_4D_ENABLE = 0x02 +} LIS3DH_INT_6D_4D_t; + +typedef enum { + LIS3DH_UP_SX = 0x44, + LIS3DH_UP_DX = 0x42, + LIS3DH_DW_SX = 0x41, + LIS3DH_DW_DX = 0x48, + LIS3DH_TOP = 0x60, + LIS3DH_BOTTOM = 0x50 +} LIS3DH_POSITION_6D_t; + +typedef enum { + LIS3DH_INT_MODE_OR = 0x00, + LIS3DH_INT_MODE_6D_MOVEMENT = 0x01, + LIS3DH_INT_MODE_AND = 0x02, + LIS3DH_INT_MODE_6D_POSITION = 0x03 +} LIS3DH_Int1Mode_t; + + +//interrupt click response +// b7 = don't care b6 = IA b5 = DClick b4 = Sclick b3 = Sign +// b2 = z b1 = y b0 = x +typedef enum { + LIS3DH_DCLICK_Z_P = 0x24, + LIS3DH_DCLICK_Z_N = 0x2C, + LIS3DH_SCLICK_Z_P = 0x14, + LIS3DH_SCLICK_Z_N = 0x1C, + LIS3DH_DCLICK_Y_P = 0x22, + LIS3DH_DCLICK_Y_N = 0x2A, + LIS3DH_SCLICK_Y_P = 0x12, + LIS3DH_SCLICK_Y_N = 0x1A, + LIS3DH_DCLICK_X_P = 0x21, + LIS3DH_DCLICK_X_N = 0x29, + LIS3DH_SCLICK_X_P = 0x11, + LIS3DH_SCLICK_X_N = 0x19, + LIS3DH_NO_CLICK = 0x00 +} LIS3DH_Click_Response; + +//TODO: start from here and manage the shared macros etc before this + +/* Exported constants --------------------------------------------------------*/ + +#ifndef __SHARED__CONSTANTS +#define __SHARED__CONSTANTS + +#define MEMS_SET 0x01 +#define MEMS_RESET 0x00 + +#endif /*__SHARED__CONSTANTS*/ + + +//Register Definition +#define LIS3DH_WHO_AM_I 0x0F // device identification register + +// CONTROL REGISTER 1 +#define LIS3DH_CTRL_REG1 0x20 +#define LIS3DH_ODR_BIT BIT(4) +#define LIS3DH_LPEN BIT(3) +#define LIS3DH_ZEN BIT(2) +#define LIS3DH_YEN BIT(1) +#define LIS3DH_XEN BIT(0) + +//CONTROL REGISTER 2 +#define LIS3DH_CTRL_REG2 0x21 +#define LIS3DH_HPM BIT(6) +#define LIS3DH_HPCF BIT(4) +#define LIS3DH_FDS BIT(3) +#define LIS3DH_HPCLICK BIT(2) +#define LIS3DH_HPIS2 BIT(1) +#define LIS3DH_HPIS1 BIT(0) + +//CONTROL REGISTER 3 +#define LIS3DH_CTRL_REG3 0x22 +#define LIS3DH_I1_CLICK BIT(7) +#define LIS3DH_I1_AOI1 BIT(6) +#define LIS3DH_I1_AOI2 BIT(5) +#define LIS3DH_I1_DRDY1 BIT(4) +#define LIS3DH_I1_DRDY2 BIT(3) +#define LIS3DH_I1_WTM BIT(2) +#define LIS3DH_I1_ORUN BIT(1) + +//CONTROL REGISTER 6 +#define LIS3DH_CTRL_REG6 0x25 +#define LIS3DH_I2_CLICK BIT(7) +#define LIS3DH_I2_INT1 BIT(6) +#define LIS3DH_I2_BOOT BIT(4) +#define LIS3DH_H_LACTIVE BIT(1) + +//TEMPERATURE CONFIG REGISTER +#define LIS3DH_TEMP_CFG_REG 0x1F +#define LIS3DH_ADC_PD BIT(7) +#define LIS3DH_TEMP_EN BIT(6) + +//CONTROL REGISTER 4 +#define LIS3DH_CTRL_REG4 0x23 +#define LIS3DH_BDU BIT(7) +#define LIS3DH_BLE BIT(6) +#define LIS3DH_FS BIT(4) +#define LIS3DH_HR BIT(3) +#define LIS3DH_ST BIT(1) +#define LIS3DH_SIM BIT(0) + +//CONTROL REGISTER 5 +#define LIS3DH_CTRL_REG5 0x24 +#define LIS3DH_BOOT BIT(7) +#define LIS3DH_FIFO_EN BIT(6) +#define LIS3DH_LIR_INT1 BIT(3) +#define LIS3DH_D4D_INT1 BIT(2) + +//REFERENCE/DATA_CAPTURE +#define LIS3DH_REFERENCE_REG 0x26 +#define LIS3DH_REF BIT(0) + +//STATUS_REG_AXIES +#define LIS3DH_STATUS_REG 0x27 +#define LIS3DH_ZYXOR BIT(7) +#define LIS3DH_ZOR BIT(6) +#define LIS3DH_YOR BIT(5) +#define LIS3DH_XOR BIT(4) +#define LIS3DH_ZYXDA BIT(3) +#define LIS3DH_ZDA BIT(2) +#define LIS3DH_YDA BIT(1) +#define LIS3DH_XDA BIT(0) + +//STATUS_REG_AUX +#define LIS3DH_STATUS_AUX 0x07 + +//INTERRUPT 1 CONFIGURATION +#define LIS3DH_INT1_CFG 0x30 +#define LIS3DH_ANDOR BIT(7) +#define LIS3DH_INT_6D BIT(6) +#define LIS3DH_ZHIE BIT(5) +#define LIS3DH_ZLIE BIT(4) +#define LIS3DH_YHIE BIT(3) +#define LIS3DH_YLIE BIT(2) +#define LIS3DH_XHIE BIT(1) +#define LIS3DH_XLIE BIT(0) + +//FIFO CONTROL REGISTER +#define LIS3DH_FIFO_CTRL_REG 0x2E +#define LIS3DH_FM BIT(6) +#define LIS3DH_TR BIT(5) +#define LIS3DH_FTH BIT(0) + +//CONTROL REG3 bit mask +#define LIS3DH_CLICK_ON_PIN_INT1_ENABLE 0x80 +#define LIS3DH_CLICK_ON_PIN_INT1_DISABLE 0x00 +#define LIS3DH_I1_INT1_ON_PIN_INT1_ENABLE 0x40 +#define LIS3DH_I1_INT1_ON_PIN_INT1_DISABLE 0x00 +#define LIS3DH_I1_INT2_ON_PIN_INT1_ENABLE 0x20 +#define LIS3DH_I1_INT2_ON_PIN_INT1_DISABLE 0x00 +#define LIS3DH_I1_DRDY1_ON_INT1_ENABLE 0x10 +#define LIS3DH_I1_DRDY1_ON_INT1_DISABLE 0x00 +#define LIS3DH_I1_DRDY2_ON_INT1_ENABLE 0x08 +#define LIS3DH_I1_DRDY2_ON_INT1_DISABLE 0x00 +#define LIS3DH_WTM_ON_INT1_ENABLE 0x04 +#define LIS3DH_WTM_ON_INT1_DISABLE 0x00 +#define LIS3DH_INT1_OVERRUN_ENABLE 0x02 +#define LIS3DH_INT1_OVERRUN_DISABLE 0x00 + +//CONTROL REG6 bit mask +#define LIS3DH_CLICK_ON_PIN_INT2_ENABLE 0x80 +#define LIS3DH_CLICK_ON_PIN_INT2_DISABLE 0x00 +#define LIS3DH_I2_INT1_ON_PIN_INT2_ENABLE 0x40 +#define LIS3DH_I2_INT1_ON_PIN_INT2_DISABLE 0x00 +#define LIS3DH_I2_INT2_ON_PIN_INT2_ENABLE 0x20 +#define LIS3DH_I2_INT2_ON_PIN_INT2_DISABLE 0x00 +#define LIS3DH_I2_BOOT_ON_INT2_ENABLE 0x10 +#define LIS3DH_I2_BOOT_ON_INT2_DISABLE 0x00 +#define LIS3DH_INT_ACTIVE_HIGH 0x00 +#define LIS3DH_INT_ACTIVE_LOW 0x02 + +//INT1_CFG bit mask +#define LIS3DH_INT1_AND 0x80 +#define LIS3DH_INT1_OR 0x00 +#define LIS3DH_INT1_ZHIE_ENABLE 0x20 +#define LIS3DH_INT1_ZHIE_DISABLE 0x00 +#define LIS3DH_INT1_ZLIE_ENABLE 0x10 +#define LIS3DH_INT1_ZLIE_DISABLE 0x00 +#define LIS3DH_INT1_YHIE_ENABLE 0x08 +#define LIS3DH_INT1_YHIE_DISABLE 0x00 +#define LIS3DH_INT1_YLIE_ENABLE 0x04 +#define LIS3DH_INT1_YLIE_DISABLE 0x00 +#define LIS3DH_INT1_XHIE_ENABLE 0x02 +#define LIS3DH_INT1_XHIE_DISABLE 0x00 +#define LIS3DH_INT1_XLIE_ENABLE 0x01 +#define LIS3DH_INT1_XLIE_DISABLE 0x00 + +//INT1_SRC bit mask +#define LIS3DH_INT1_SRC_IA 0x40 +#define LIS3DH_INT1_SRC_ZH 0x20 +#define LIS3DH_INT1_SRC_ZL 0x10 +#define LIS3DH_INT1_SRC_YH 0x08 +#define LIS3DH_INT1_SRC_YL 0x04 +#define LIS3DH_INT1_SRC_XH 0x02 +#define LIS3DH_INT1_SRC_XL 0x01 + +//INT1 REGISTERS +#define LIS3DH_INT1_THS 0x32 +#define LIS3DH_INT1_DURATION 0x33 + +//INTERRUPT 1 SOURCE REGISTER +#define LIS3DH_INT1_SRC 0x31 + +//FIFO Source Register bit Mask +#define LIS3DH_FIFO_SRC_WTM 0x80 +#define LIS3DH_FIFO_SRC_OVRUN 0x40 +#define LIS3DH_FIFO_SRC_EMPTY 0x20 + +//INTERRUPT CLICK REGISTER +#define LIS3DH_CLICK_CFG 0x38 +//INTERRUPT CLICK CONFIGURATION bit mask +#define LIS3DH_ZD_ENABLE 0x20 +#define LIS3DH_ZD_DISABLE 0x00 +#define LIS3DH_ZS_ENABLE 0x10 +#define LIS3DH_ZS_DISABLE 0x00 +#define LIS3DH_YD_ENABLE 0x08 +#define LIS3DH_YD_DISABLE 0x00 +#define LIS3DH_YS_ENABLE 0x04 +#define LIS3DH_YS_DISABLE 0x00 +#define LIS3DH_XD_ENABLE 0x02 +#define LIS3DH_XD_DISABLE 0x00 +#define LIS3DH_XS_ENABLE 0x01 +#define LIS3DH_XS_DISABLE 0x00 + +//INTERRUPT CLICK SOURCE REGISTER +#define LIS3DH_CLICK_SRC 0x39 +//INTERRUPT CLICK SOURCE REGISTER bit mask +#define LIS3DH_IA 0x40 +#define LIS3DH_DCLICK 0x20 +#define LIS3DH_SCLICK 0x10 +#define LIS3DH_CLICK_SIGN 0x08 +#define LIS3DH_CLICK_Z 0x04 +#define LIS3DH_CLICK_Y 0x02 +#define LIS3DH_CLICK_X 0x01 + +//Click-click Register +#define LIS3DH_CLICK_THS 0x3A +#define LIS3DH_TIME_LIMIT 0x3B +#define LIS3DH_TIME_LATENCY 0x3C +#define LIS3DH_TIME_WINDOW 0x3D + +//OUTPUT REGISTER +#define LIS3DH_OUT_X_L 0x28 +#define LIS3DH_OUT_X_H 0x29 +#define LIS3DH_OUT_Y_L 0x2A +#define LIS3DH_OUT_Y_H 0x2B +#define LIS3DH_OUT_Z_L 0x2C +#define LIS3DH_OUT_Z_H 0x2D + +//AUX REGISTER +#define LIS3DH_OUT_1_L 0x08 +#define LIS3DH_OUT_1_H 0x09 +#define LIS3DH_OUT_2_L 0x0A +#define LIS3DH_OUT_2_H 0x0B +#define LIS3DH_OUT_3_L 0x0C +#define LIS3DH_OUT_3_H 0x0D + +//STATUS REGISTER bit mask +#define LIS3DH_STATUS_REG_ZYXOR 0x80 // 1 : new data set has over written the previous one +// 0 : no overrun has occurred (default) +#define LIS3DH_STATUS_REG_ZOR 0x40 // 0 : no overrun has occurred (default) +// 1 : new Z-axis data has over written the previous one +#define LIS3DH_STATUS_REG_YOR 0x20 // 0 : no overrun has occurred (default) +// 1 : new Y-axis data has over written the previous one +#define LIS3DH_STATUS_REG_XOR 0x10 // 0 : no overrun has occurred (default) +// 1 : new X-axis data has over written the previous one +#define LIS3DH_STATUS_REG_ZYXDA 0x08 // 0 : a new set of data is not yet avvious one +// 1 : a new set of data is available +#define LIS3DH_STATUS_REG_ZDA 0x04 // 0 : a new data for the Z-Axis is not availvious one +// 1 : a new data for the Z-Axis is available +#define LIS3DH_STATUS_REG_YDA 0x02 // 0 : a new data for the Y-Axis is not available +// 1 : a new data for the Y-Axis is available +#define LIS3DH_STATUS_REG_XDA 0x01 // 0 : a new data for the X-Axis is not available + +#define LIS3DH_DATAREADY_BIT LIS3DH_STATUS_REG_ZYXDA + + +//STATUS AUX REGISTER bit mask +#define LIS3DH_STATUS_AUX_321OR 0x80 +#define LIS3DH_STATUS_AUX_3OR 0x40 +#define LIS3DH_STATUS_AUX_2OR 0x20 +#define LIS3DH_STATUS_AUX_1OR 0x10 +#define LIS3DH_STATUS_AUX_321DA 0x08 +#define LIS3DH_STATUS_AUX_3DA 0x04 +#define LIS3DH_STATUS_AUX_2DA 0x02 +#define LIS3DH_STATUS_AUX_1DA 0x01 + +#define LIS3DH_MEMS_I2C_ADDRESS 0x33 + +//FIFO REGISTERS +#define LIS3DH_FIFO_CTRL_REG 0x2E +#define LIS3DH_FIFO_SRC_REG 0x2F + + +/* Exported macro ------------------------------------------------------------*/ + +#ifndef __SHARED__MACROS + +#define __SHARED__MACROS +#define ValBit(VAR,Place) (VAR & (1< +#include + +/* Includes ------------------------------------------------------------------*/ +/* Exported types ------------------------------------------------------------*/ + +//these could change accordingly with the architecture + +#ifndef __ARCHDEP__TYPES +#define __ARCHDEP__TYPES + +typedef unsigned char u8_t; +typedef unsigned short int u16_t; +typedef short int i16_t; +typedef signed char i8_t; + +#endif /*__ARCHDEP__TYPES*/ + +typedef u8_t LIS3DH_IntPinConf_t; +typedef u8_t LIS3DH_Axis_t; +typedef u8_t LIS3DH_Int1Conf_t; +#define LIS3DH_FULLSCALE LIS3DH_FULLSCALE_4 + +#define LIS3DH_READBIT (0x80) +#define LIS3DH_MSBIT (0x40) +#define BIT_0 0x01 /**< The value of bit 0 */ +#define BIT_1 0x02 /**< The value of bit 1 */ +#define BIT_2 0x04 /**< The value of bit 2 */ +#define BIT_3 0x08 /**< The value of bit 3 */ +#define BIT_4 0x10 /**< The value of bit 4 */ +#define BIT_5 0x20 /**< The value of bit 5 */ +#define BIT_6 0x40 /**< The value of bit 6 */ +#define BIT_7 0x80 /**< The value of bit 7 */ + +// Bit twiddling keys for use with different registers +enum +{ + LIS3DH_STATUS_REG_ZYXDA = 0x08, // STATUS_REG: XYZ - sample ready + LIS3DH_STATUS_REG_ZYXOR = 0x80, // STATUS_REG: XYZ - new set of data has overwritten the previous ones + LIS3DH_CTRL_REG1_XEN = 0x01, // CTRL_REG1: X enable + LIS3DH_CTRL_REG1_YEN = 0x02, // CTRL_REG1: Y enable + LIS3DH_CTRL_REG1_ZEN = 0x04, // CTRL_REG1: Z enable + LIS3DH_CTRL_REG1_XYZEN = 0x07, // CTRL_REG1: X+Y+Z enable + LIS3DH_CTRL_REG1_LPEN = 0x08, // CTRL_REG1: Low power enable + LIS3DH_CTRL_REG1_DATARATE_POWERDOWN = 0x00, // CTRL_REG1: 0000 xxxx + LIS3DH_CTRL_REG1_DATARATE_1HZ = 0x10, // CTRL_REG1: 0001 xxxx + LIS3DH_CTRL_REG1_DATARATE_10HZ = 0x20, // CTRL_REG1: 0010 xxxx + LIS3DH_CTRL_REG1_DATARATE_25HZ = 0x30, // CTRL_REG1: 0011 xxxx + LIS3DH_CTRL_REG1_DATARATE_50HZ = 0x40, // CTRL_REG1: 0100 xxxx + LIS3DH_CTRL_REG1_DATARATE_100HZ = 0x50, // CTRL_REG1: 0101 xxxx + LIS3DH_CTRL_REG1_DATARATE_200HZ = 0x60, // CTRL_REG1: 0110 xxxx + LIS3DH_CTRL_REG1_DATARATE_400HZ = 0x70, // CTRL_REG1: 0111 xxxx + LIS3DH_CTRL_REG1_DATARATE_1500HZ = 0x80, // CTRL_REG1: 1000 xxxx + LIS3DH_CTRL_REG1_DATARATE_5000HZ = 0x90, // CTRL_REG1: 1001 xxxx + LIS3DH_CTRL_REG4_BLOCKDATAUPDATE = 0x80, // CTRL_REG4: 1xxx xxxx + LIS3DH_CTRL_REG4_SCALE_2G = 0x00, // CTRL_REG4: xx00 xxxx + LIS3DH_CTRL_REG4_SCALE_4G = 0x10, // CTRL_REG4: xx01 xxxx + LIS3DH_CTRL_REG4_SCALE_8G = 0x20, // CTRL_REG4: xx10 xxxx + LIS3DH_CTRL_REG4_SCALE_16G = 0x30, // CTRL_REG4: xx11 xxxx +}; + +//define structure +#ifndef __SHARED__TYPES +#define __SHARED__TYPES + +typedef enum { + MEMS_SUCCESS = 0x01, + MEMS_ERROR = 0x00 +} status_t; + +typedef enum { + MEMS_ENABLE = 0x01, + MEMS_DISABLE = 0x00 +} State_t; + +typedef struct +{ + i16_t AXIS_X; + i16_t AXIS_Y; + i16_t AXIS_Z; +} +AxesRaw_t; + +#endif /*__SHARED__TYPES*/ + +typedef enum { + LIS3DH_ODR_1Hz = 0x01, + LIS3DH_ODR_10Hz = 0x02, + LIS3DH_ODR_25Hz = 0x03, + LIS3DH_ODR_50Hz = 0x04, + LIS3DH_ODR_100Hz = 0x05, + LIS3DH_ODR_200Hz = 0x06, + LIS3DH_ODR_400Hz = 0x07, + LIS3DH_ODR_1620Hz_LP = 0x08, + LIS3DH_ODR_1344Hz_NP_5367HZ_LP = 0x09 +} LIS3DH_ODR_t; + +typedef enum { + LIS3DH_POWER_DOWN = 0x00, + LIS3DH_LOW_POWER = 0x01, + LIS3DH_NORMAL = 0x02 +} LIS3DH_Mode_t; + +typedef enum { + LIS3DH_HPM_NORMAL_MODE_RES = 0x00, + LIS3DH_HPM_REF_SIGNAL = 0x01, + LIS3DH_HPM_NORMAL_MODE = 0x02, + LIS3DH_HPM_AUTORESET_INT = 0x03 +} LIS3DH_HPFMode_t; + +typedef enum { + LIS3DH_HPFCF_0 = 0x00, + LIS3DH_HPFCF_1 = 0x01, + LIS3DH_HPFCF_2 = 0x02, + LIS3DH_HPFCF_3 = 0x03 +} LIS3DH_HPFCutOffFreq_t; + +typedef struct +{ + u16_t AUX_1; + u16_t AUX_2; + u16_t AUX_3; +} +LIS3DH_Aux123Raw_t; + +typedef enum { + LIS3DH_FULLSCALE_2 = 0x00, + LIS3DH_FULLSCALE_4 = 0x01, + LIS3DH_FULLSCALE_8 = 0x02, + LIS3DH_FULLSCALE_16 = 0x03 +} LIS3DH_Fullscale_t; + +typedef enum { + LIS3DH_BLE_LSB = 0x00, + LIS3DH_BLE_MSB = 0x01 +} LIS3DH_Endianess_t; + +typedef enum { + LIS3DH_SELF_TEST_DISABLE = 0x00, + LIS3DH_SELF_TEST_0 = 0x01, + LIS3DH_SELF_TEST_1 = 0x02 +} LIS3DH_SelfTest_t; + +typedef enum { + LIS3DH_FIFO_BYPASS_MODE = 0x00, + LIS3DH_FIFO_MODE = 0x01, + LIS3DH_FIFO_STREAM_MODE = 0x02, + LIS3DH_FIFO_TRIGGER_MODE = 0x03, + LIS3DH_FIFO_DISABLE = 0x04 +} LIS3DH_FifoMode_t; + +typedef enum { + LIS3DH_TRIG_INT1 = 0x00, + LIS3DH_TRIG_INT2 = 0x01 +} LIS3DH_TrigInt_t; + +typedef enum { + LIS3DH_SPI_4_WIRE = 0x00, + LIS3DH_SPI_3_WIRE = 0x01 +} LIS3DH_SPIMode_t; + +typedef enum { + LIS3DH_X_ENABLE = 0x01, + LIS3DH_X_DISABLE = 0x00, + LIS3DH_Y_ENABLE = 0x02, + LIS3DH_Y_DISABLE = 0x00, + LIS3DH_Z_ENABLE = 0x04, + LIS3DH_Z_DISABLE = 0x00 +} LIS3DH_AXISenable_t; + +typedef enum { + LIS3DH_INT1_6D_4D_DISABLE = 0x00, + LIS3DH_INT1_6D_ENABLE = 0x01, + LIS3DH_INT1_4D_ENABLE = 0x02 +} LIS3DH_INT_6D_4D_t; + +typedef enum { + LIS3DH_UP_SX = 0x44, + LIS3DH_UP_DX = 0x42, + LIS3DH_DW_SX = 0x41, + LIS3DH_DW_DX = 0x48, + LIS3DH_TOP = 0x60, + LIS3DH_BOTTOM = 0x50 +} LIS3DH_POSITION_6D_t; + +typedef enum { + LIS3DH_INT_MODE_OR = 0x00, + LIS3DH_INT_MODE_6D_MOVEMENT = 0x01, + LIS3DH_INT_MODE_AND = 0x02, + LIS3DH_INT_MODE_6D_POSITION = 0x03 +} LIS3DH_Int1Mode_t; + + +//interrupt click response +// b7 = don't care b6 = IA b5 = DClick b4 = Sclick b3 = Sign +// b2 = z b1 = y b0 = x +typedef enum { + LIS3DH_DCLICK_Z_P = 0x24, + LIS3DH_DCLICK_Z_N = 0x2C, + LIS3DH_SCLICK_Z_P = 0x14, + LIS3DH_SCLICK_Z_N = 0x1C, + LIS3DH_DCLICK_Y_P = 0x22, + LIS3DH_DCLICK_Y_N = 0x2A, + LIS3DH_SCLICK_Y_P = 0x12, + LIS3DH_SCLICK_Y_N = 0x1A, + LIS3DH_DCLICK_X_P = 0x21, + LIS3DH_DCLICK_X_N = 0x29, + LIS3DH_SCLICK_X_P = 0x11, + LIS3DH_SCLICK_X_N = 0x19, + LIS3DH_NO_CLICK = 0x00 +} LIS3DH_Click_Response; + +//TODO: start from here and manage the shared macros etc before this + +/* Exported constants --------------------------------------------------------*/ + +#ifndef __SHARED__CONSTANTS +#define __SHARED__CONSTANTS + +#define MEMS_SET 0x01 +#define MEMS_RESET 0x00 + +#endif /*__SHARED__CONSTANTS*/ + + +//Register Definition +#define LIS3DH_WHO_AM_I 0x0F // device identification register + +// CONTROL REGISTER 1 +#define LIS3DH_CTRL_REG1 0x20 +#define LIS3DH_ODR_BIT BIT(4) +#define LIS3DH_LPEN BIT(3) +#define LIS3DH_ZEN BIT(2) +#define LIS3DH_YEN BIT(1) +#define LIS3DH_XEN BIT(0) + +//CONTROL REGISTER 2 +#define LIS3DH_CTRL_REG2 0x21 +#define LIS3DH_HPM BIT(6) +#define LIS3DH_HPCF BIT(4) +#define LIS3DH_FDS BIT(3) +#define LIS3DH_HPCLICK BIT(2) +#define LIS3DH_HPIS2 BIT(1) +#define LIS3DH_HPIS1 BIT(0) + +//CONTROL REGISTER 3 +#define LIS3DH_CTRL_REG3 0x22 +#define LIS3DH_I1_CLICK BIT(7) +#define LIS3DH_I1_AOI1 BIT(6) +#define LIS3DH_I1_AOI2 BIT(5) +#define LIS3DH_I1_DRDY1 BIT(4) +#define LIS3DH_I1_DRDY2 BIT(3) +#define LIS3DH_I1_WTM BIT(2) +#define LIS3DH_I1_ORUN BIT(1) + +//CONTROL REGISTER 6 +#define LIS3DH_CTRL_REG6 0x25 +#define LIS3DH_I2_CLICK BIT(7) +#define LIS3DH_I2_INT1 BIT(6) +#define LIS3DH_I2_BOOT BIT(4) +#define LIS3DH_H_LACTIVE BIT(1) + +//TEMPERATURE CONFIG REGISTER +#define LIS3DH_TEMP_CFG_REG 0x1F +#define LIS3DH_ADC_PD BIT(7) +#define LIS3DH_TEMP_EN BIT(6) + +//CONTROL REGISTER 4 +#define LIS3DH_CTRL_REG4 0x23 +#define LIS3DH_BDU BIT(7) +#define LIS3DH_BLE BIT(6) +#define LIS3DH_FS BIT(4) +#define LIS3DH_HR BIT(3) +#define LIS3DH_ST BIT(1) +#define LIS3DH_SIM BIT(0) + +//CONTROL REGISTER 5 +#define LIS3DH_CTRL_REG5 0x24 +#define LIS3DH_BOOT BIT(7) +#define LIS3DH_FIFO_EN BIT(6) +#define LIS3DH_LIR_INT1 BIT(3) +#define LIS3DH_D4D_INT1 BIT(2) + +//REFERENCE/DATA_CAPTURE +#define LIS3DH_REFERENCE_REG 0x26 +#define LIS3DH_REF BIT(0) + +//STATUS_REG_AXIES +#define LIS3DH_STATUS_REG 0x27 +#define LIS3DH_ZYXOR BIT(7) +#define LIS3DH_ZOR BIT(6) +#define LIS3DH_YOR BIT(5) +#define LIS3DH_XOR BIT(4) +#define LIS3DH_ZYXDA BIT(3) +#define LIS3DH_ZDA BIT(2) +#define LIS3DH_YDA BIT(1) +#define LIS3DH_XDA BIT(0) + +//STATUS_REG_AUX +#define LIS3DH_STATUS_AUX 0x07 + +//INTERRUPT 1 CONFIGURATION +#define LIS3DH_INT1_CFG 0x30 +#define LIS3DH_ANDOR BIT(7) +#define LIS3DH_INT_6D BIT(6) +#define LIS3DH_ZHIE BIT(5) +#define LIS3DH_ZLIE BIT(4) +#define LIS3DH_YHIE BIT(3) +#define LIS3DH_YLIE BIT(2) +#define LIS3DH_XHIE BIT(1) +#define LIS3DH_XLIE BIT(0) + +//FIFO CONTROL REGISTER +#define LIS3DH_FIFO_CTRL_REG 0x2E +#define LIS3DH_FM BIT(6) +#define LIS3DH_TR BIT(5) +#define LIS3DH_FTH BIT(0) + +//CONTROL REG3 bit mask +#define LIS3DH_CLICK_ON_PIN_INT1_ENABLE 0x80 +#define LIS3DH_CLICK_ON_PIN_INT1_DISABLE 0x00 +#define LIS3DH_I1_INT1_ON_PIN_INT1_ENABLE 0x40 +#define LIS3DH_I1_INT1_ON_PIN_INT1_DISABLE 0x00 +#define LIS3DH_I1_INT2_ON_PIN_INT1_ENABLE 0x20 +#define LIS3DH_I1_INT2_ON_PIN_INT1_DISABLE 0x00 +#define LIS3DH_I1_DRDY1_ON_INT1_ENABLE 0x10 +#define LIS3DH_I1_DRDY1_ON_INT1_DISABLE 0x00 +#define LIS3DH_I1_DRDY2_ON_INT1_ENABLE 0x08 +#define LIS3DH_I1_DRDY2_ON_INT1_DISABLE 0x00 +#define LIS3DH_WTM_ON_INT1_ENABLE 0x04 +#define LIS3DH_WTM_ON_INT1_DISABLE 0x00 +#define LIS3DH_INT1_OVERRUN_ENABLE 0x02 +#define LIS3DH_INT1_OVERRUN_DISABLE 0x00 + +//CONTROL REG6 bit mask +#define LIS3DH_CLICK_ON_PIN_INT2_ENABLE 0x80 +#define LIS3DH_CLICK_ON_PIN_INT2_DISABLE 0x00 +#define LIS3DH_I2_INT1_ON_PIN_INT2_ENABLE 0x40 +#define LIS3DH_I2_INT1_ON_PIN_INT2_DISABLE 0x00 +#define LIS3DH_I2_INT2_ON_PIN_INT2_ENABLE 0x20 +#define LIS3DH_I2_INT2_ON_PIN_INT2_DISABLE 0x00 +#define LIS3DH_I2_BOOT_ON_INT2_ENABLE 0x10 +#define LIS3DH_I2_BOOT_ON_INT2_DISABLE 0x00 +#define LIS3DH_INT_ACTIVE_HIGH 0x00 +#define LIS3DH_INT_ACTIVE_LOW 0x02 + +//INT1_CFG bit mask +#define LIS3DH_INT1_AND 0x80 +#define LIS3DH_INT1_OR 0x00 +#define LIS3DH_INT1_ZHIE_ENABLE 0x20 +#define LIS3DH_INT1_ZHIE_DISABLE 0x00 +#define LIS3DH_INT1_ZLIE_ENABLE 0x10 +#define LIS3DH_INT1_ZLIE_DISABLE 0x00 +#define LIS3DH_INT1_YHIE_ENABLE 0x08 +#define LIS3DH_INT1_YHIE_DISABLE 0x00 +#define LIS3DH_INT1_YLIE_ENABLE 0x04 +#define LIS3DH_INT1_YLIE_DISABLE 0x00 +#define LIS3DH_INT1_XHIE_ENABLE 0x02 +#define LIS3DH_INT1_XHIE_DISABLE 0x00 +#define LIS3DH_INT1_XLIE_ENABLE 0x01 +#define LIS3DH_INT1_XLIE_DISABLE 0x00 + +//INT1_SRC bit mask +#define LIS3DH_INT1_SRC_IA 0x40 +#define LIS3DH_INT1_SRC_ZH 0x20 +#define LIS3DH_INT1_SRC_ZL 0x10 +#define LIS3DH_INT1_SRC_YH 0x08 +#define LIS3DH_INT1_SRC_YL 0x04 +#define LIS3DH_INT1_SRC_XH 0x02 +#define LIS3DH_INT1_SRC_XL 0x01 + +//INT1 REGISTERS +#define LIS3DH_INT1_THS 0x32 +#define LIS3DH_INT1_DURATION 0x33 + +//INTERRUPT 1 SOURCE REGISTER +#define LIS3DH_INT1_SRC 0x31 + +//FIFO Source Register bit Mask +#define LIS3DH_FIFO_SRC_WTM 0x80 +#define LIS3DH_FIFO_SRC_OVRUN 0x40 +#define LIS3DH_FIFO_SRC_EMPTY 0x20 + +//INTERRUPT CLICK REGISTER +#define LIS3DH_CLICK_CFG 0x38 +//INTERRUPT CLICK CONFIGURATION bit mask +#define LIS3DH_ZD_ENABLE 0x20 +#define LIS3DH_ZD_DISABLE 0x00 +#define LIS3DH_ZS_ENABLE 0x10 +#define LIS3DH_ZS_DISABLE 0x00 +#define LIS3DH_YD_ENABLE 0x08 +#define LIS3DH_YD_DISABLE 0x00 +#define LIS3DH_YS_ENABLE 0x04 +#define LIS3DH_YS_DISABLE 0x00 +#define LIS3DH_XD_ENABLE 0x02 +#define LIS3DH_XD_DISABLE 0x00 +#define LIS3DH_XS_ENABLE 0x01 +#define LIS3DH_XS_DISABLE 0x00 + +//INTERRUPT CLICK SOURCE REGISTER +#define LIS3DH_CLICK_SRC 0x39 +//INTERRUPT CLICK SOURCE REGISTER bit mask +#define LIS3DH_IA 0x40 +#define LIS3DH_DCLICK 0x20 +#define LIS3DH_SCLICK 0x10 +#define LIS3DH_CLICK_SIGN 0x08 +#define LIS3DH_CLICK_Z 0x04 +#define LIS3DH_CLICK_Y 0x02 +#define LIS3DH_CLICK_X 0x01 + +//Click-click Register +#define LIS3DH_CLICK_THS 0x3A +#define LIS3DH_TIME_LIMIT 0x3B +#define LIS3DH_TIME_LATENCY 0x3C +#define LIS3DH_TIME_WINDOW 0x3D + +//OUTPUT REGISTER +#define LIS3DH_OUT_X_L 0x28 +#define LIS3DH_OUT_X_H 0x29 +#define LIS3DH_OUT_Y_L 0x2A +#define LIS3DH_OUT_Y_H 0x2B +#define LIS3DH_OUT_Z_L 0x2C +#define LIS3DH_OUT_Z_H 0x2D + +//AUX REGISTER +#define LIS3DH_OUT_1_L 0x08 +#define LIS3DH_OUT_1_H 0x09 +#define LIS3DH_OUT_2_L 0x0A +#define LIS3DH_OUT_2_H 0x0B +#define LIS3DH_OUT_3_L 0x0C +#define LIS3DH_OUT_3_H 0x0D + +//STATUS REGISTER bit mask +#define LIS3DH_STATUS_REG_ZYXOR 0x80 // 1 : new data set has over written the previous one +// 0 : no overrun has occurred (default) +#define LIS3DH_STATUS_REG_ZOR 0x40 // 0 : no overrun has occurred (default) +// 1 : new Z-axis data has over written the previous one +#define LIS3DH_STATUS_REG_YOR 0x20 // 0 : no overrun has occurred (default) +// 1 : new Y-axis data has over written the previous one +#define LIS3DH_STATUS_REG_XOR 0x10 // 0 : no overrun has occurred (default) +// 1 : new X-axis data has over written the previous one +#define LIS3DH_STATUS_REG_ZYXDA 0x08 // 0 : a new set of data is not yet avvious one +// 1 : a new set of data is available +#define LIS3DH_STATUS_REG_ZDA 0x04 // 0 : a new data for the Z-Axis is not availvious one +// 1 : a new data for the Z-Axis is available +#define LIS3DH_STATUS_REG_YDA 0x02 // 0 : a new data for the Y-Axis is not available +// 1 : a new data for the Y-Axis is available +#define LIS3DH_STATUS_REG_XDA 0x01 // 0 : a new data for the X-Axis is not available + +#define LIS3DH_DATAREADY_BIT LIS3DH_STATUS_REG_ZYXDA + + +//STATUS AUX REGISTER bit mask +#define LIS3DH_STATUS_AUX_321OR 0x80 +#define LIS3DH_STATUS_AUX_3OR 0x40 +#define LIS3DH_STATUS_AUX_2OR 0x20 +#define LIS3DH_STATUS_AUX_1OR 0x10 +#define LIS3DH_STATUS_AUX_321DA 0x08 +#define LIS3DH_STATUS_AUX_3DA 0x04 +#define LIS3DH_STATUS_AUX_2DA 0x02 +#define LIS3DH_STATUS_AUX_1DA 0x01 + +#define LIS3DH_MEMS_I2C_ADDRESS 0x33 + +//FIFO REGISTERS +#define LIS3DH_FIFO_CTRL_REG 0x2E +#define LIS3DH_FIFO_SRC_REG 0x2F + + +/* Exported macro ------------------------------------------------------------*/ + +#ifndef __SHARED__MACROS + +#define __SHARED__MACROS +#define ValBit(VAR,Place) (VAR & (1< 100 ms at 50 Hz + MMA8451Write( MMA8451_PL_COUNT, 0x05 ); + + // Set device in active mode + MMA8451Read( MMA8451_CTRL_REG1, &ctrlReg1 ); + MMA8451Write( MMA8451_CTRL_REG1, ctrlReg1 | 0x01 ); +} diff --git a/src/peripherals/mma8451.h b/src/peripherals/mma8451.h new file mode 100755 index 0000000..817148b --- /dev/null +++ b/src/peripherals/mma8451.h @@ -0,0 +1,76 @@ +/* + / _____) _ | | +( (____ _____ ____ _| |_ _____ ____| |__ + \____ \| ___ | (_ _) ___ |/ ___) _ \ + _____) ) ____| | | || |_| ____( (___| | | | +(______/|_____)_|_|_| \__)_____)\____)_| |_| + (C)2013 Semtech + +Description: Driver for the MMA8451 Accelerometer + +License: Revised BSD License, see LICENSE.TXT file include in the project + +Maintainer: Miguel Luis and Gregory Cristian +*/ +#ifndef __MMA8451_H__ +#define __MMA8451_H__ + +/* + * MMA8451 I2C address + */ +#define MMA8451_I2C_ADDRESS 0x1C + +/* + * MMA8451 Registers + */ +#define MMA8451_STATUS 0x00 // +#define MMA8451_OUT_X_MSB 0x01 // +#define MMA8451_SYSMOD 0x0B // +#define MMA8451_INT_SOURCE 0x0C // +#define MMA8451_ID 0x0D // +#define MMA8451_PL_STATUS 0x10 // +#define MMA8451_PL_CFG 0x11 // +#define MMA8451_PL_COUNT 0x12 // Orientation debounce +#define MMA8451_PL_BF_ZCOMP 0x13 // +#define MMA8451_PL_THS_REG 0x14 // +#define MMA8451_FF_MT_SRC 0x16 // +#define MMA8451_TRANSIENT_CFG 0x1D // Transient enable +#define MMA8451_TRANSIENT_SRC 0x1E // Transient read/clear interrupt +#define MMA8451_TRANSIENT_THS 0x1F // Transient threshold +#define MMA8451_TRANSIENT_COUNT 0x20 // Transient debounce +#define MMA8451_PULSE_SRC 0x22 // +#define MMA8451_CTRL_REG1 0x2A // +#define MMA8451_CTRL_REG2 0x2B // +#define MMA8451_CTRL_REG3 0x2C // Interrupt control +#define MMA8451_CTRL_REG4 0x2D // Interrupt enable +#define MMA8451_CTRL_REG5 0x2E // Interrupt pin selection + +/*! + * \brief Initializes the device + * + * \retval status [SUCCESS, FAIL] + */ +uint8_t MMA8451Init( void ); + +/*! + * \brief Resets the device + * + * \retval status [SUCCESS, FAIL] + */ +uint8_t MMA8451Reset( void ); + +/*! + * \brief Initializes the orientation detection + */ +void MMA8451OrientDetect( void ); + +/*! + * \brief Gets the orientation state. + * + * \retval orientation Bit 6 [1: Horizontal, 0: Vertical] + * Bit 0 [1: Face down, 0: Face up] + * Other bits don't care. + */ +uint8_t MMA8451GetOrientation( void ); + +#endif // __MMA8451_H__ diff --git a/src/peripherals/mpl3115.c b/src/peripherals/mpl3115.c new file mode 100755 index 0000000..d365459 --- /dev/null +++ b/src/peripherals/mpl3115.c @@ -0,0 +1,405 @@ +/* + / _____) _ | | +( (____ _____ ____ _| |_ _____ ____| |__ + \____ \| ___ | (_ _) ___ |/ ___) _ \ + _____) ) ____| | | || |_| ____( (___| | | | +(______/|_____)_|_|_| \__)_____)\____)_| |_| + (C)2013 Semtech + +Description: Driver for the MPL3115 Temperature, pressure and altitude sensor + +License: Revised BSD License, see LICENSE.TXT file include in the project + +Maintainer: Miguel Luis and Gregory Cristian +*/ +#include "board.h" +#include "mpl3115.h" + +/*! + * I2C device address + */ +static uint8_t I2cDeviceAddr = 0; + +/*! + * Indicates if the MPL3115 is initialized or not + */ +static bool MPL3115Initialized = false; + +/*! + * Defines the barometric reading types + */ +typedef enum +{ + PRESSURE, + ALTITUDE, +}BarometerReadingType_t; + +/*! + * \brief Writes a byte at specified address in the device + * + * \param [IN]: addr + * \param [IN]: data + * \retval status [SUCCESS, FAIL] + */ +uint8_t MPL3115Write( uint8_t addr, uint8_t data ); + +/*! + * \brief Writes a buffer at specified address in the device + * + * \param [IN]: addr + * \param [IN]: data + * \param [IN]: size + * \retval status [SUCCESS, FAIL] + */ +uint8_t MPL3115WriteBuffer( uint8_t addr, uint8_t *data, uint8_t size ); + +/*! + * \brief Reads a byte at specified address in the device + * + * \param [IN]: addr + * \param [OUT]: data + * \retval status [SUCCESS, FAIL] + */ +uint8_t MPL3115Read( uint8_t addr, uint8_t *data ); + +/*! + * \brief Reads a buffer at specified address in the device + * + * \param [IN]: addr + * \param [OUT]: data + * \param [IN]: size + * \retval status [SUCCESS, FAIL] + */ +uint8_t MPL3115ReadBuffer( uint8_t addr, uint8_t *data, uint8_t size ); + +/*! + * \brief Sets the I2C device slave address + * + * \param [IN]: addr + */ +void MPL3115SetDeviceAddr( uint8_t addr ); + +/*! + * \brief Gets the I2C device slave address + * + * \retval: addr Current device slave address + */ +uint8_t MPL3115GetDeviceAddr( void ); + +/*! + * \brief Sets the device in barometer Mode + */ +void MPL3115SetModeBarometer( void ); + +/*! + * \brief Sets the device in altimeter Mode + */ +void MPL3115SetModeAltimeter( void ); + +/*! + * \brief Sets the device in standby + */ +void MPL3115SetModeStandby( void ); + +/*! + * \brief Sets the device in active Mode + */ +void MPL3115SetModeActive( void ); + +/*! + * \brief Toggles the OST bit causing the sensor to immediately take another + * reading + */ +void MPL3115ToggleOneShot( void ); + +uint8_t MPL3115Init( void ) +{ + uint8_t regVal = 0; + + MPL3115SetDeviceAddr( MPL3115A_I2C_ADDRESS ); + + if( MPL3115Initialized == false ) + { + MPL3115Write( CTRL_REG1, RST ); + DelayMs( 50 ); + I2cResetBus( &I2c ); + + // Check MPL3115 ID + MPL3115Read( MPL3115_ID, ®Val ); + if( regVal != 0xC4 ) + { + return FAIL; + } + + MPL3115Write( PT_DATA_CFG_REG, DREM | PDEFE | TDEFE ); // Enable data ready flags for pressure and temperature ) + MPL3115Write( CTRL_REG1, ALT | OS_32 | SBYB ); // Set sensor to active state with oversampling ratio 128 (512 ms between samples) + MPL3115Initialized = true; + } + return SUCCESS; +} + +uint8_t MPL3115Reset( void ) +{ + // Reset all registers to POR values + if( MPL3115Write( CTRL_REG1, RST ) == SUCCESS ) + { + return SUCCESS; + } + return FAIL; +} + +uint8_t MPL3115Write( uint8_t addr, uint8_t data ) +{ + return MPL3115WriteBuffer( addr, &data, 1 ); +} + +uint8_t MPL3115WriteBuffer( uint8_t addr, uint8_t *data, uint8_t size ) +{ + return I2cWriteBuffer( &I2c, I2cDeviceAddr << 1, addr, data, size ); +} + +uint8_t MPL3115Read( uint8_t addr, uint8_t *data ) +{ + return MPL3115ReadBuffer( addr, data, 1 ); +} + +uint8_t MPL3115ReadBuffer( uint8_t addr, uint8_t *data, uint8_t size ) +{ + return I2cReadBuffer( &I2c, I2cDeviceAddr << 1, addr, data, size ); +} + +void MPL3115SetDeviceAddr( uint8_t addr ) +{ + I2cDeviceAddr = addr; +} + +uint8_t MPL3115GetDeviceAddr( void ) +{ + return I2cDeviceAddr; +} + +static float MPL3115ReadBarometer( BarometerReadingType_t type ) +{ + uint8_t counter = 0; + uint8_t tempBuf[3]; + uint8_t msb = 0, csb = 0, lsb = 0; + uint8_t status = 0; + + if( MPL3115Initialized == false ) + { + return 0; + } + + if( type == ALTITUDE ) + { + MPL3115SetModeAltimeter( ); + } + else + { + MPL3115SetModeBarometer( ); + } + + MPL3115ToggleOneShot( ); + + while( ( status & PDR ) != PDR ) + { + MPL3115Read( STATUS_REG, &status ); + DelayMs( 10 ); + counter++; + + if( counter > 20 ) + { + MPL3115Initialized = false; + MPL3115Init( ); + if( type == ALTITUDE ) + { + MPL3115SetModeAltimeter( ); + } + else + { + MPL3115SetModeBarometer( ); + } + MPL3115ToggleOneShot( ); + counter = 0; + + while( ( status & PDR ) != PDR ) + { + MPL3115Read( STATUS_REG, &status ); + DelayMs( 10 ); + counter++; + + if( counter > 20 ) + { + // Error out after max of 512 ms for a read + return 0; + } + } + } + } + + MPL3115ReadBuffer( OUT_P_MSB_REG, tempBuf, 3 ); //Read altitude data + + msb = tempBuf[0]; + csb = tempBuf[1]; + lsb = tempBuf[2]; + + if( type == ALTITUDE ) + { + float altitude = 0; + float decimal = ( ( float )( lsb >> 4 ) ) / 16.0; + altitude = ( float )( ( int16_t )( ( msb << 8 ) | csb ) ) + decimal; + return( altitude ); + } + else + { + float pressure = ( float )( ( msb << 16 | csb << 8 | lsb ) >> 6 ); + lsb &= 0x30; // Bits 5/4 represent the fractional component + lsb >>= 4; // Get it right aligned + float decimal = ( ( float )lsb ) / 4.0; + pressure = pressure + decimal; + return( pressure ); + } +} + +float MPL3115ReadAltitude( void ) +{ + return MPL3115ReadBarometer( ALTITUDE ); +} + +float MPL3115ReadPressure( void ) +{ + return MPL3115ReadBarometer( PRESSURE ); +} + +float MPL3115ReadTemperature( void ) +{ + uint8_t counter = 0; + uint8_t tempBuf[2]; + uint8_t msb = 0, lsb = 0; + bool negSign = false; + uint8_t val = 0; + float temperature = 0; + uint8_t status = 0; + + if( MPL3115Initialized == false ) + { + return 0; + } + + MPL3115ToggleOneShot( ); + + while( ( status & TDR ) != TDR ) + { + MPL3115Read( STATUS_REG, &status ); + DelayMs( 10 ); + counter++; + + if( counter > 20 ) + { + MPL3115Initialized = false; + MPL3115Init( ); + MPL3115ToggleOneShot( ); + counter = 0; + + while( ( status & TDR ) != TDR ) + { + MPL3115Read( STATUS_REG, &status ); + DelayMs( 10 ); + counter++; + + if( counter > 20 ) + { + // Error out after max of 512 ms for a read + return 0; + } + } + } + } + + MPL3115ReadBuffer( OUT_T_MSB_REG, tempBuf, 2 ); + + msb = tempBuf[0]; + lsb = tempBuf[1]; + + if( msb > 0x7F ) + { + val = ~( ( msb << 8 ) + lsb ) + 1; // 2’s complement + msb = val >> 8; + lsb = val & 0x00F0; + negSign = true; + } + + if( negSign == true ) + { + temperature = 0 - ( msb + ( float )( ( lsb >> 4 ) / 16.0 ) ); + } + else + { + temperature = msb + ( float )( ( lsb >> 4 ) / 16.0 ); + } + + MPL3115ToggleOneShot( ); + + return( temperature ); +} + +void MPL3115ToggleOneShot( void ) +{ + uint8_t ctrlReg = 0; + + MPL3115SetModeStandby( ); + + MPL3115Read( CTRL_REG1, &ctrlReg ); // Read current settings + ctrlReg &= ~OST; // Clear OST bit + MPL3115Write( CTRL_REG1, ctrlReg ); + + MPL3115Read( CTRL_REG1, &ctrlReg ); // Read current settings to be safe + ctrlReg |= OST; // Set OST bit + MPL3115Write( CTRL_REG1, ctrlReg ); + + MPL3115SetModeActive( ); +} + +void MPL3115SetModeBarometer( void ) +{ + uint8_t ctrlReg = 0; + + MPL3115SetModeStandby( ); + + MPL3115Read( CTRL_REG1, &ctrlReg ); // Read current settings + ctrlReg &= ~ALT; // Set ALT bit to zero + MPL3115Write( CTRL_REG1, ctrlReg ); + + MPL3115SetModeActive( ); +} + +void MPL3115SetModeAltimeter( void ) +{ + uint8_t ctrlReg = 0; + + MPL3115SetModeStandby( ); + + MPL3115Read( CTRL_REG1, &ctrlReg ); // Read current settings + ctrlReg |= ALT; // Set ALT bit to one + MPL3115Write( CTRL_REG1, ctrlReg ); + + MPL3115SetModeActive( ); +} + +void MPL3115SetModeStandby( void ) +{ + uint8_t ctrlReg = 0; + + MPL3115Read( CTRL_REG1, &ctrlReg ); + ctrlReg &= ~SBYB; // Clear SBYB bit for Standby mode + MPL3115Write( CTRL_REG1, ctrlReg ); +} + +void MPL3115SetModeActive( void ) +{ + uint8_t ctrlReg = 0; + + MPL3115Read( CTRL_REG1, &ctrlReg ); + ctrlReg |= SBYB; // Set SBYB bit for Active mode + MPL3115Write( CTRL_REG1, ctrlReg ); +} diff --git a/src/peripherals/mpl3115.h b/src/peripherals/mpl3115.h new file mode 100755 index 0000000..fddc322 --- /dev/null +++ b/src/peripherals/mpl3115.h @@ -0,0 +1,148 @@ +/* + / _____) _ | | +( (____ _____ ____ _| |_ _____ ____| |__ + \____ \| ___ | (_ _) ___ |/ ___) _ \ + _____) ) ____| | | || |_| ____( (___| | | | +(______/|_____)_|_|_| \__)_____)\____)_| |_| + (C)2013 Semtech + +Description: Driver for the MPL3115 Temperature, pressure and altitude sensor + +License: Revised BSD License, see LICENSE.TXT file include in the project + +Maintainer: Miguel Luis and Gregory Cristian +*/ +#ifndef __MPL3115_H__ +#define __MPL3115_H__ + +/* + * MPL3115A2 I2C address + */ +#define MPL3115A_I2C_ADDRESS 0x60 + +/* + * MPL3115A2 Registers + */ +#define STATUS_REG 0x00 // STATUS Register + +#define OUT_P_MSB_REG 0x01 // Bits 12-19 of 20-bit real-time Pressure sample +#define OUT_P_CSB_REG 0x02 // Bits 4-11 of 20-bit real-time Pressure sample +#define OUT_P_LSB_REG 0x03 // Bits 0-3 of 20-bit real-time Pressure sample +#define OUT_T_MSB_REG 0x04 // Bits 4-11 of 12-bit real-time Temperature sample +#define OUT_T_LSB_REG 0x05 // Bits 0-3 of 12-bit real-time Temperature sample + +#define DR_STATUS 0x06 // Data Ready status information + +#define OUT_P_DELTA_MSB_REG 0x07 // Bits 12-19 of 20-bit Pressure change data +#define OUT_P_DELTA_CSB_REG 0x08 // Bits 4-11 of 20-bit Pressure change data +#define OUT_P_DELTA_LSB_REG 0x09 // Bits 0-3 of 20-bit Pressure change data +#define OUT_T_DELTA_MSB_REG 0x0A // Bits 4-11 of 12-bit Temperature change data +#define OUT_T_DELTA_LSB_REG 0x0B // Bits 0-3 of 12-bit Temperature change data + +#define MPL3115_ID 0x0C // Fixed Device ID Number = 0xC4 + +#define F_STATUS_REG 0x0D // FIFO Status +#define F_DATA_REG 0x0E // FIFO 8-bit data access +#define F_SETUP_REG 0x0F // FIFO setup +#define TIME_DLY_REG 0x10 // Time since FIFO overflow + +#define SYSMOD_REG 0x11 // Current system mode +#define INT_SOURCE_REG 0x12 // Interrupt status +#define PT_DATA_CFG_REG 0x13 // Data event flag configuration + +#define BAR_IN_MSB_REG 0x14 // Barometric input for Altitude calculation bits 8-15 +#define BAR_IN_LSB_REG 0x15 // Barometric input for Altitude calculation bits 0-7 + +#define P_TGT_MSB_REG 0x16 // Pressure/Altitude target value bits 8-15 +#define P_TGT_LSB_REG 0x17 // Pressure/Altitude target value bits 0-7 +#define T_TGT_REG 0x18 // Temperature target value + +#define P_WND_MSB_REG 0x19 // Pressure/Altitude window value bits 8-15 +#define P_WND_LSB_REG 0x1A // Pressure/Altitude window value bits 0-7 +#define T_WND_REG 0x1B // Temperature window value + +#define P_MIN_MSB_REG 0x1C // Minimum Pressure/Altitude bits 12-19 +#define P_MIN_CSB_REG 0x1D // Minimum Pressure/Altitude bits 4-11 +#define P_MIN_LSB_REG 0x1E // Minimum Pressure/Altitude bits 0-3 +#define T_MIN_MSB_REG 0x1F // Minimum Temperature bits 8-15 +#define T_MIN_LSB_REG 0x20 // Minimum Temperature bits 0-7 + +#define P_MAX_MSB_REG 0x21 // Maximum Pressure/Altitude bits 12-19 +#define P_MAX_CSB_REG 0x22 // Maximum Pressure/Altitude bits 4-11 +#define P_MAX_LSB_REG 0x23 // Maximum Pressure/Altitude bits 0-3 +#define T_MAX_MSB_REG 0x24 // Maximum Pressure/Altitude bits 8-15 +#define T_MAX_LSB_REG 0x25 // Maximum Pressure/Altitude bits 0-7 + +#define CTRL_REG1 0x26 // CTRL_REG1 System Control 1 Register +#define CTRL_REG2 0x27 // CTRL_REG2 System Control 2 Register +#define CTRL_REG3 0x28 // CTRL_REG3 Interrupt Configuration Register +#define CTRL_REG4 0x29 // CTRL_REG4 Interrupt Enable Register +#define CTRL_REG5 0x2A // CTRL_REG5 Interrupt Output Pin Assignment Register + +#define OFF_P_REG 0x2B // Pressure data offset +#define OFF_T_REG 0x2C // Temperature data offset +#define OFF_H_REG 0x2D // Altitude data offset + + +/* + * MPL3115A2 Bit Field + */ +#define PTDR 0x08 +#define PDR 0x04 +#define TDR 0x02 +#define ALT 0x80 +#define RAW 0x40 +#define OS2 0x20 +#define OS1 0x10 +#define OS0 0x08 +#define RST 0x04 +#define OST 0x02 +#define SBYB 0x01 +#define OS_1 0x00 +#define OS_2 OS0 +#define OS_4 OS1 +#define OS_8 OS1 | OS0 +#define OS_16 OS2 +#define OS_32 OS2 | OS0 +#define OS_64 OS2 | OS1 +#define OS_128 OS2 | OS1 | OS0 +#define DREM 0x04 +#define PDEFE 0x02 +#define TDEFE 0x01 + +/*! + * \brief Initializes the device + * + * \retval status [SUCCESS, FAIL] + */ +uint8_t MPL3115Init( void ); + +/*! + * \brief Resets the device + * + * \retval status [SUCCESS, FAIL] + */ +uint8_t MPL3115Reset( void ); + +/*! + * \brief Reads the altitude from the MPL3115 + * + * \retval altitude Measured altitude + */ +float MPL3115ReadAltitude( void ); + +/*! + * \brief Reads the Pressure from the MPL3115 + * + * \retval pressure Measured pressure + */ +float MPL3115ReadPressure( void ); + +/*! + * \brief Reads the Temperature from the MPL3115 + * + * \retval temperature Measured temperature + */ +float MPL3115ReadTemperature( void ); + +#endif // __MPL3115_H__ diff --git a/src/peripherals/pam7q.c b/src/peripherals/pam7q.c new file mode 100755 index 0000000..3baeeb1 --- /dev/null +++ b/src/peripherals/pam7q.c @@ -0,0 +1,100 @@ +/* + / _____) _ | | +( (____ _____ ____ _| |_ _____ ____| |__ + \____ \| ___ | (_ _) ___ |/ ___) _ \ + _____) ) ____| | | || |_| ____( (___| | | | +(______/|_____)_|_|_| \__)_____)\____)_| |_| + (C)2016 Semtech + +Description: Driver for the SX1509 IO expander + +License: Revised BSD License, see LICENSE.TXT file include in the project + +Maintainer: Miguel Luis and Gregory Cristian +*/ +#include "board.h" +#include "pam7q.h" + +static uint8_t I2cDeviceAddr = 0; + +void PAM7QInit( void ) +{ + PAM7QSetDeviceAddr( PAM7Q_I2C_ADDRESS ); +} + +bool PAM7QGetGpsData( uint8_t *nmeaString, uint8_t *nmeaStringSize, uint16_t nmeaMaxStringSize ) +{ + uint8_t status; + uint16_t pendingBytes; + bool result = false; + + *nmeaStringSize = 0; + + status = PAM7QReadBuffer( MESSAGE_SIZE_1, nmeaString, 2 ); + + if( status == SUCCESS ) + { + // build a 16bit number + pendingBytes = ( uint16_t )( ( nmeaString[0] << 8 ) | nmeaString[1] ); + + // check for invalid length + if( pendingBytes == 0xFFFF ) + { + pendingBytes = 0; + } + // just to buffer size + if( pendingBytes > ( nmeaMaxStringSize - 1 ) ) + { + pendingBytes = nmeaMaxStringSize - 1; + } + + // read pending data from GPS module + status = PAM7QReadBuffer( PAYLOAD, nmeaString, pendingBytes ); + + // make sure the string is terminated + if( status == SUCCESS ) + { + nmeaString[pendingBytes] = 0x00; + + // copy length indication to argument + *nmeaStringSize = pendingBytes; + + // return success only if there is data to process + if( pendingBytes > 0 ) + { + result = true; + } + } + } + return result; +} + +uint8_t PAM7QGetDeviceAddr( void ) +{ + return I2cDeviceAddr; +} + +void PAM7QSetDeviceAddr( uint8_t addr ) +{ + I2cDeviceAddr = addr; +} + +uint8_t PAM7QWrite( uint8_t addr, uint8_t data ) +{ + return PAM7QWriteBuffer( addr, &data, 1 ); +} + +uint8_t PAM7QWriteBuffer( uint8_t addr, uint8_t *data, uint8_t size ) +{ + return I2cWriteBuffer( &I2c, I2cDeviceAddr << 1, addr, data, size ); +} + +uint8_t PAM7QRead( uint8_t addr, uint8_t *data ) +{ + return PAM7QReadBuffer( addr, data, 1 ); +} + +uint8_t PAM7QReadBuffer( uint8_t addr, uint8_t *data, uint8_t size ) +{ + return I2cReadBuffer( &I2c, I2cDeviceAddr << 1, addr, data, size ); +} diff --git a/src/peripherals/pam7q.h b/src/peripherals/pam7q.h new file mode 100755 index 0000000..369e472 --- /dev/null +++ b/src/peripherals/pam7q.h @@ -0,0 +1,48 @@ +/* + / _____) _ | | +( (____ _____ ____ _| |_ _____ ____| |__ + \____ \| ___ | (_ _) ___ |/ ___) _ \ + _____) ) ____| | | || |_| ____( (___| | | | +(______/|_____)_|_|_| \__)_____)\____)_| |_| + (C)2016 Semtech + +Description: Driver for the SX1509 IO expander + +License: Revised BSD License, see LICENSE.TXT file include in the project + +Maintainer: Miguel Luis and Gregory Cristian +*/ +#ifndef __PAM7Q_H__ +#define __PAM7Q_H__ + +void PAM7QInit( void ); + +uint8_t PAM7QGetDeviceAddr( void ); + +void PAM7QSetDeviceAddr( uint8_t addr ); + +bool PAM7QGetGpsData( uint8_t *nmeaString, uint8_t *nmeaStringSize, uint16_t nmeaMaxStringSize ); + +uint8_t PAM7QWrite( uint8_t addr, uint8_t data ); + +uint8_t PAM7QWriteBuffer( uint8_t addr, uint8_t *data, uint8_t size ); + +uint8_t PAM7QRead( uint8_t addr, uint8_t *data ); + +uint8_t PAM7QReadBuffer( uint8_t addr, uint8_t *data, uint8_t size ); + +void GpsMcuOnPpsSignal( void ); + +/* + * MPL3115A2 I2C address + */ +#define PAM7Q_I2C_ADDRESS 0x42 + +#define MESSAGE_SIZE_1 0xFD +#define MESSAGE_SIZE_2 0xFE + +#define PAYLOAD 0xFF + + +#endif // __PAM7Q_H__ + diff --git a/src/peripherals/selector.c b/src/peripherals/selector.c new file mode 100755 index 0000000..0f7aae5 --- /dev/null +++ b/src/peripherals/selector.c @@ -0,0 +1,59 @@ +/* + / _____) _ | | +( (____ _____ ____ _| |_ _____ ____| |__ + \____ \| ___ | (_ _) ___ |/ ___) _ \ + _____) ) ____| | | || |_| ____( (___| | | | +(______/|_____)_|_|_| \__)_____)\____)_| |_| + (C)2013 Semtech + +Description: Hex coder selector driver implementation + +License: Revised BSD License, see LICENSE.TXT file include in the project + +Maintainer: Miguel Luis and Gregory Cristian +*/ +#include "board.h" + +#include "selector.h" +#if 0 +uint8_t SelectorGetValue( void ) +{ + /*! + * Hex coder selector GPIO pins objects + */ + Gpio_t Sel1; + Gpio_t Sel2; + Gpio_t Sel3; + Gpio_t Sel4; + + uint8_t i = 0; + uint8_t j = 0; + uint8_t k = 255; + + // Active + GpioInit( &Sel1, SEL_1, PIN_INPUT, PIN_PUSH_PULL, PIN_PULL_UP, 0 ); + GpioInit( &Sel2, SEL_2, PIN_INPUT, PIN_PUSH_PULL, PIN_PULL_UP, 0 ); + GpioInit( &Sel3, SEL_3, PIN_INPUT, PIN_PUSH_PULL, PIN_PULL_UP, 0 ); + GpioInit( &Sel4, SEL_4, PIN_INPUT, PIN_PUSH_PULL, PIN_PULL_UP, 0 ); + + do + { + j = i; + k = j; + // 1 ms delay between checks + DelayMs( 1 ); + i = !GpioRead( &Sel1 ); + i += 2 * !GpioRead( &Sel2 ); + i += 4 * !GpioRead( &Sel3 ); + i += 8 * !GpioRead( &Sel4 ); + } while( ( i != j ) && ( i != k ) ); // Waits for 3 successive values to be equal + + // Sleep + GpioInit( &Sel1, SEL_1, PIN_OUTPUT, PIN_OPEN_DRAIN, PIN_NO_PULL, 0 ); + GpioInit( &Sel2, SEL_2, PIN_OUTPUT, PIN_OPEN_DRAIN, PIN_NO_PULL, 0 ); + GpioInit( &Sel3, SEL_3, PIN_OUTPUT, PIN_OPEN_DRAIN, PIN_NO_PULL, 0 ); + GpioInit( &Sel4, SEL_4, PIN_OUTPUT, PIN_OPEN_DRAIN, PIN_NO_PULL, 0 ); + + return i; +} +#endif \ No newline at end of file diff --git a/src/peripherals/selector.h b/src/peripherals/selector.h new file mode 100755 index 0000000..f102dbb --- /dev/null +++ b/src/peripherals/selector.h @@ -0,0 +1,25 @@ +/* + / _____) _ | | +( (____ _____ ____ _| |_ _____ ____| |__ + \____ \| ___ | (_ _) ___ |/ ___) _ \ + _____) ) ____| | | || |_| ____( (___| | | | +(______/|_____)_|_|_| \__)_____)\____)_| |_| + (C)2013 Semtech + +Description: Hex coder selector driver implementation + +License: Revised BSD License, see LICENSE.TXT file include in the project + +Maintainer: Miguel Luis and Gregory Cristian +*/ +#ifndef __SELECTOR_H__ +#define __SELECTOR_H__ + +/*! + * Gets the current hex coder selector position + * + * \retval position Hex coder current position ( On error position = 255 ) + */ +uint8_t SelectorGetValue( void ); + +#endif // __SELECTOR_H__ diff --git a/src/peripherals/sx1509.c b/src/peripherals/sx1509.c new file mode 100755 index 0000000..b2f9f5d --- /dev/null +++ b/src/peripherals/sx1509.c @@ -0,0 +1,73 @@ +/* + / _____) _ | | +( (____ _____ ____ _| |_ _____ ____| |__ + \____ \| ___ | (_ _) ___ |/ ___) _ \ + _____) ) ____| | | || |_| ____( (___| | | | +(______/|_____)_|_|_| \__)_____)\____)_| |_| + (C)2013 Semtech + +Description: Driver for the SX1509 IO expander + +License: Revised BSD License, see LICENSE.TXT file include in the project + +Maintainer: Miguel Luis and Gregory Cristian +*/ +#include "board.h" +#include "sx1509.h" + +static uint8_t I2cDeviceAddr = 0; + +static bool SX1509Initialized = false; + +void SX1509Init( void ) +{ + if( SX1509Initialized == false ) + { + SX1509SetDeviceAddr( SX1509_I2C_ADDRESS ); + SX1509Initialized = true; + + SX1509Reset( ); + } +} + +uint8_t SX1509Reset( ) +{ + if( SX1509Write( RegReset, 0x12 ) == SUCCESS ) + { + if( SX1509Write( RegReset, 0x34 ) == SUCCESS ) + { + return SUCCESS; + } + } + return FAIL; +} + +uint8_t SX1509Write( uint8_t addr, uint8_t data ) +{ + return SX1509WriteBuffer( addr, &data, 1 ); +} + +uint8_t SX1509WriteBuffer( uint8_t addr, uint8_t *data, uint8_t size ) +{ + return I2cWriteBuffer( &I2c, I2cDeviceAddr << 1, addr, data, size ); +} + +uint8_t SX1509Read( uint8_t addr, uint8_t *data ) +{ + return SX1509ReadBuffer( addr, data, 1 ); +} + +uint8_t SX1509ReadBuffer( uint8_t addr, uint8_t *data, uint8_t size ) +{ + return I2cReadBuffer( &I2c, I2cDeviceAddr << 1, addr, data, size ); +} + +void SX1509SetDeviceAddr( uint8_t addr ) +{ + I2cDeviceAddr = addr; +} + +uint8_t SX1509GetDeviceAddr( void ) +{ + return I2cDeviceAddr; +} diff --git a/src/peripherals/sx1509.h b/src/peripherals/sx1509.h new file mode 100755 index 0000000..4bfcc32 --- /dev/null +++ b/src/peripherals/sx1509.h @@ -0,0 +1,206 @@ +/* + / _____) _ | | +( (____ _____ ____ _| |_ _____ ____| |__ + \____ \| ___ | (_ _) ___ |/ ___) _ \ + _____) ) ____| | | || |_| ____( (___| | | | +(______/|_____)_|_|_| \__)_____)\____)_| |_| + (C)2013 Semtech + +Description: Driver for the SX1509 IO expander + +License: Revised BSD License, see LICENSE.TXT file include in the project + +Maintainer: Miguel Luis and Gregory Cristian +*/ +#ifndef __SX1509_H__ +#define __SX1509_H__ + + +#define SX1509_I2C_ADDRESS 0x3E + +/*! + * SX1509 registers addresses + */ +#define RegReset 0x7D + +#define RegInputDisableB 0x00 +#define RegInputDisableA 0x01 +#define RegLongSlewB 0x02 +#define RegLongSlewA 0x03 +#define RegLowDriveB 0x04 +#define RegLowDriveA 0x05 +#define RegPullUpB 0x06 +#define RegPullUpA 0x07 +#define RegPullDownB 0x08 +#define RegPullDownA 0x09 +#define RegOpenDrainB 0x0A +#define RegOpenDrainA 0x0B +#define RegPolarityB 0x0C +#define RegPolarityA 0x0D +#define RegDirB 0x0E +#define RegDirA 0x0F +#define RegDataB 0x10 +#define RegDataA 0x11 +#define RegInterruptMaskB 0x12 +#define RegInterruptMaskA 0x13 +#define RegSenseHighB 0x14 +#define RegSenseLowB 0x15 +#define RegSenseHighA 0x16 +#define RegSenseLowA 0x17 +#define RegInterruptSourceB 0x18 +#define RegInterruptSourceA 0x19 +#define RegEventStatusB 0x1A +#define RegEventStatusA 0x1B +#define RegLevelShifter1 0x1C +#define RegLevelShifter2 0x1D +#define RegClock 0x1E +#define RegMisc 0x1F +#define RegLEDDriverEnableB 0x20 +#define RegLEDDriverEnableA 0x21 +#define RegDebounceConfig 0x22 +#define RegDebounceEnableB 0x23 +#define RegDebounceEnableA 0x24 +#define RegKeyConfig1 0x25 +#define RegKeyConfig2 0x26 +#define RegKeyData1 0x27 +#define RegKeyData2 0x28 +#define RegTOn0 0x29 +#define RegIOn0 0x2A +#define RegOff0 0x2B +#define RegTOn1 0x2C +#define RegIOn1 0x2D +#define RegOff1 0x2E +#define RegTOn2 0x2F +#define RegIOn2 0x30 +#define RegOff2 0x31 +#define RegTOn3 0x32 +#define RegIOn3 0x33 +#define RegOff3 0x34 +#define RegTOn4 0x35 +#define RegIOn4 0x36 +#define RegOff4 0x37 +#define RegTRise4 0x38 +#define RegTFall4 0x39 +#define RegTOn5 0x3A +#define RegIOn5 0x3B +#define RegOff5 0x3C +#define RegTRise5 0x3D +#define RegTFall5 0x3E +#define RegTOn6 0x3F +#define RegIOn6 0x40 +#define RegOff6 0x41 +#define RegTRise6 0x42 +#define RegTFall6 0x43 +#define RegTOn7 0x44 +#define RegIOn7 0x45 +#define RegOff7 0x46 +#define RegTRise7 0x47 +#define RegTFall7 0x48 +#define RegTOn8 0x49 +#define RegIOn8 0x4A +#define RegOff8 0x4B +#define RegTOn9 0x4C +#define RegIOn9 0x4D +#define RegOff9 0x4E +#define RegTOn10 0x4F +#define RegIOn10 0x50 +#define RegOff10 0x51 +#define RegTOn11 0x52 +#define RegIOn11 0x53 +#define RegOff11 0x54 +#define RegTOn12 0x55 +#define RegIOn12 0x56 +#define RegOff12 0x57 +#define RegTRise12 0x58 +#define RegTFall12 0x59 +#define RegTOn13 0x5A +#define RegIOn13 0x5B +#define RegOff13 0x5C +#define RegTRise13 0x5D +#define RegTFall13 0x5E +#define RegTOn14 0x5F +#define RegIOn14 0x60 +#define RegOff14 0x61 +#define RegTRise14 0x62 +#define RegTFall14 0x63 +#define RegTOn15 0x64 +#define RegIOn15 0x65 +#define RegOff15 0x66 +#define RegTRise15 0x67 +#define RegTFall15 0x68 +#define RegHighInputB 0x69 +#define RegHighInputA 0x6A + +/*! + * \brief Mask to select correct data from the registers + */ +#define REG_SENSE_PIN_MASK_1 0xFC +#define REG_SENSE_PIN_MASK_2 0xF3 +#define REG_SENSE_PIN_MASK_3 0xCF +#define REG_SENSE_PIN_MASK_4 0x3F + +/*! + * \brief Initializes the device + */ +void SX1509Init( void ); + +/*! + * \brief Resets the device + * + * \retval status [SUCCESS, FAIL] + */ +uint8_t SX1509Reset( void ); + +/*! + * \brief Writes a byte at specified address in the device + * + * \param [IN]: addr + * \param [IN]: data + * \retval status [SUCCESS, FAIL] + */ +uint8_t SX1509Write( uint8_t addr, uint8_t data ); + +/*! + * \brief Writes a buffer at specified address in the device + * + * \param [IN]: addr + * \param [IN]: data + * \param [IN]: size + * \retval status [SUCCESS, FAIL] + */ +uint8_t SX1509WriteBuffer( uint8_t addr, uint8_t *data, uint8_t size ); + +/*! + * \brief Reads a byte at specified address in the device + * + * \param [IN]: addr + * \param [OUT]: data + * \retval status [SUCCESS, FAIL] + */ +uint8_t SX1509Read( uint8_t addr, uint8_t *data ); + +/*! + * \brief Reads a buffer at specified address in the device + * + * \param [IN]: addr + * \param [OUT]: data + * \param [IN]: size + * \retval status [SUCCESS, FAIL] + */ +uint8_t SX1509ReadBuffer( uint8_t addr, uint8_t *data, uint8_t size ); + +/*! + * \brief Sets the I2C device slave address + * + * \param [IN]: addr + */ +void SX1509SetDeviceAddr( uint8_t addr ); + +/*! + * \brief Gets the I2C device slave address + * + * \retval: addr Current device slave address + */ +uint8_t SX1509GetDeviceAddr( void ); + +#endif // __SX1509_H__ diff --git a/src/peripherals/sx9500.c b/src/peripherals/sx9500.c new file mode 100755 index 0000000..d4e29a3 --- /dev/null +++ b/src/peripherals/sx9500.c @@ -0,0 +1,110 @@ +/* + / _____) _ | | +( (____ _____ ____ _| |_ _____ ____| |__ + \____ \| ___ | (_ _) ___ |/ ___) _ \ + _____) ) ____| | | || |_| ____( (___| | | | +(______/|_____)_|_|_| \__)_____)\____)_| |_| + (C)2013 Semtech + +Description: Driver for the SX9500 proximity sensor + +License: Revised BSD License, see LICENSE.TXT file include in the project + +Maintainer: Miguel Luis and Gregory Cristian +*/ +#include "board.h" +#include "sx9500.h" + +static uint8_t I2cDeviceAddr = 0; + +static bool SX9500Initialized = false; + +uint8_t SX9500Init( void ) +{ + uint8_t regVal = 0; + + SX9500SetDeviceAddr( SX9500_I2C_ADDRESS ); + + if( SX9500Initialized == false ) + { + SX9500Initialized = true; + + SX9500Read( SX9500_REG_PROXCTRL0, ®Val ); + if( regVal != 0x0F ) + { + return FAIL; + } + + SX9500Reset( ); + } + return SUCCESS; +} + +uint8_t SX9500Reset( ) +{ + if( SX9500Write( SX9500_REG_RESET, SX9500_RESET_CMD ) == SUCCESS ) + { + return SUCCESS; + } + return FAIL; +} + +uint8_t SX9500Write( uint8_t addr, uint8_t data ) +{ + return SX9500WriteBuffer( addr, &data, 1 ); +} + +uint8_t SX9500WriteBuffer( uint8_t addr, uint8_t *data, uint8_t size ) +{ + return I2cWriteBuffer( &I2c, I2cDeviceAddr << 1, addr, data, size ); +} + +uint8_t SX9500Read( uint8_t addr, uint8_t *data ) +{ + return SX9500ReadBuffer( addr, data, 1 ); +} + +uint8_t SX9500ReadBuffer( uint8_t addr, uint8_t *data, uint8_t size ) +{ + return I2cReadBuffer( &I2c, I2cDeviceAddr << 1, addr, data, size ); +} + +void SX9500SetDeviceAddr( uint8_t addr ) +{ + I2cDeviceAddr = addr; +} + +uint8_t SX9500GetDeviceAddr( void ) +{ + return I2cDeviceAddr; +} + +void SX9500LockUntilDetection( void ) +{ + uint8_t val = 0; + + SX9500Write( SX9500_REG_RESET, SX9500_RESET_CMD ); + SX9500Read( SX9500_REG_IRQSRC, &val ); + SX9500Read( SX9500_REG_STAT, &val ); + + SX9500Write( SX9500_REG_PROXCTRL0, 0x0F ); + SX9500Write( SX9500_REG_PROXCTRL1, 0x43 ); + SX9500Write( SX9500_REG_PROXCTRL2, 0x77 ); + SX9500Write( SX9500_REG_PROXCTRL3, 0x01 ); + SX9500Write( SX9500_REG_PROXCTRL4, 0x30 ); + SX9500Write( SX9500_REG_PROXCTRL5, 0x0F ); + SX9500Write( SX9500_REG_PROXCTRL6, 0x04 ); + SX9500Write( SX9500_REG_PROXCTRL7, 0x40 ); + SX9500Write( SX9500_REG_PROXCTRL8, 0x00 ); + SX9500Write( SX9500_REG_IRQMSK, 0x60 ); + + val = 0; + + while( ( val & 0xF0 ) == 0x00 ) + { + SX9500Read( SX9500_REG_STAT, &val ); + } + + SX9500Read( SX9500_REG_STAT, &val ); + SX9500Read( SX9500_REG_IRQSRC, &val ); +} diff --git a/src/peripherals/sx9500.h b/src/peripherals/sx9500.h new file mode 100755 index 0000000..4d33258 --- /dev/null +++ b/src/peripherals/sx9500.h @@ -0,0 +1,111 @@ +/* + / _____) _ | | +( (____ _____ ____ _| |_ _____ ____| |__ + \____ \| ___ | (_ _) ___ |/ ___) _ \ + _____) ) ____| | | || |_| ____( (___| | | | +(______/|_____)_|_|_| \__)_____)\____)_| |_| + (C)2013 Semtech + +Description: Driver for the SX9500 proximity sensor + +License: Revised BSD License, see LICENSE.TXT file include in the project + +Maintainer: Miguel Luis and Gregory Cristian +*/ +#ifndef __SX9500_H__ +#define __SX9500_H__ + +#define SX9500_I2C_ADDRESS 0x28 + +#define SX9500_REG_IRQSRC 0x00 +#define SX9500_REG_STAT 0x01 +#define SX9500_REG_IRQMSK 0x03 +#define SX9500_REG_PROXCTRL0 0x06 +#define SX9500_REG_PROXCTRL1 0x07 +#define SX9500_REG_PROXCTRL2 0x08 +#define SX9500_REG_PROXCTRL3 0x09 +#define SX9500_REG_PROXCTRL4 0x0A +#define SX9500_REG_PROXCTRL5 0x0B +#define SX9500_REG_PROXCTRL6 0x0C +#define SX9500_REG_PROXCTRL7 0x0D +#define SX9500_REG_PROXCTRL8 0x0E +#define SX9500_REG_SENSORSEL 0x20 +#define SX9500_REG_USEMSB 0x21 +#define SX9500_REG_USELSB 0x22 +#define SX9500_REG_AVGMSB 0x23 +#define SX9500_REG_AVGLSB 0x24 +#define SX9500_REG_DIFFMSB 0x25 +#define SX9500_REG_DIFFLSB 0x26 +#define SX9500_REG_OFFSETMSB 0x27 +#define SX9500_REG_OFFSETLSB 0x28 +#define SX9500_REG_RESET 0x7F + +#define SX9500_RESET_CMD 0xDE + +uint8_t SX9500Init( void ); + +/*! + * \brief Resets the device + * + * \retval status [OK, ERROR, UNSUPPORTED] + */ +uint8_t SX9500Reset( void ); + +/*! + * \brief Writes a byte at specified address in the device + * + * \param [IN]: addr + * \param [IN]: data + * \retval status [OK, ERROR, UNSUPPORTED] + */ +uint8_t SX9500Write( uint8_t addr, uint8_t data ); + +/*! + * \brief Writes a buffer at specified address in the device + * + * \param [IN]: addr + * \param [IN]: data + * \param [IN]: size + * \retval status [OK, ERROR, UNSUPPORTED] + */ +uint8_t SX9500WriteBuffer( uint8_t addr, uint8_t *data, uint8_t size ); + +/*! + * \brief Reads a byte at specified address in the device + * + * \param [IN]: addr + * \param [OUT]: data + * \retval status [OK, ERROR, UNSUPPORTED] + */ +uint8_t SX9500Read( uint8_t addr, uint8_t *data ); + +/*! + * \brief Reads a buffer at specified address in the device + * + * \param [IN]: addr + * \param [OUT]: data + * \param [IN]: size + * \retval status [OK, ERROR, UNSUPPORTED] + */ +uint8_t SX9500ReadBuffer( uint8_t addr, uint8_t *data, uint8_t size ); + +/*! + * \brief Sets the I2C device slave address + * + * \param [IN]: addr + */ +void SX9500SetDeviceAddr( uint8_t addr ); + +/*! + * \brief Gets the I2C device slave address + * + * \retval: addr Current device slave address + */ +uint8_t SX9500GetDeviceAddr( void ); + +/*! + * \brief Goes into a loop until a successful capacitive proximity detection + */ +void SX9500LockUntilDetection( void ); + +#endif // __SX1509_H__ diff --git a/src/stm32l0xx.h b/src/stm32l0xx.h new file mode 100755 index 0000000..4fd6aa8 --- /dev/null +++ b/src/stm32l0xx.h @@ -0,0 +1,245 @@ +/** + ****************************************************************************** + * @file stm32l0xx.h + * @author MCD Application Team + * @version V1.4.0 + * @date 16-October-2015 + * @brief CMSIS Cortex-M0+ Device Peripheral Access Layer Header File. + * This file contains all the peripheral register's definitions, bits + * definitions and memory mapping for STM32L0xx devices. + * + * The file is the unique include file that the application programmer + * is using in the C source code, usually in main.c. This file contains: + * - Configuration section that allows to select: + * - The device used in the target application + * - To use or not the peripheral’s drivers in application code(i.e. + * code will be based on direct access to peripheral’s registers + * rather than drivers API), this option is controlled by + * "#define USE_HAL_DRIVER" + * + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2015 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32l0xx + * @{ + */ + +#ifndef __STM32L0xx_H +#define __STM32L0xx_H + +#ifdef __cplusplus + extern "C" { +#endif /* __cplusplus */ + +/** @addtogroup Library_configuration_section + * @{ + */ + +/** + * @brief STM32 Family + */ +#if !defined (STM32L0) +#define STM32L0 +#endif /* STM32L0 */ + +/* Uncomment the line below according to the target STM32 device used in your + application + */ + +#if !defined (STM32L011xx) && !defined (STM32L021xx) && \ + !defined (STM32L031xx) && !defined (STM32L041xx) && \ + !defined (STM32L051xx) && !defined (STM32L052xx) && !defined (STM32L053xx) && \ + !defined (STM32L061xx) && !defined (STM32L062xx) && !defined (STM32L063xx) && \ + !defined (STM32L071xx) && !defined (STM32L072xx) && !defined (STM32L073xx) && \ + !defined (STM32L081xx) && !defined (STM32L082xx) && !defined (STM32L083xx) \ + /* #define STM32L011xx */ + /* #define STM32L021xx */ + /* #define STM32L031xx */ /*!< STM32L031C6, STM32L031E6, STM32L031F6, STM32L031G6, STM32L031K6 Devices */ + /* #define STM32L041xx */ /*!< STM32L041C6, STM32L041E6, STM32L041F6, STM32L041G6, STM32L041K6 Devices */ + /* #define STM32L051xx */ /*!< STM32L051K8, STM32L051C6, STM32L051C8, STM32L051R6, STM32L051R8 Devices */ + /* #define STM32L052xx */ /*!< STM32L052K6, STM32L052K8, STM32L052C6, STM32L052C8, STM32L052R6, STM32L052R8 Devices */ + /* #define STM32L053xx */ /*!< STM32L053C6, STM32L053C8, STM32L053R6, STM32L053R8 Devices */ + /* #define STM32L061xx */ /*!< */ + /* #define STM32L062xx */ /*!< STM32L062K8 */ + /* #define STM32L063xx */ /*!< STM32L063C8, STM32L063R8 */ + /* #define STM32L071xx */ /*!< */ + /* #define STM32L072xx */ /*!< */ + /* #define STM32L073xx */ /*!< STM32L073V8, STM32L073VB, STM32L073RB, STM32L073VZ, STM32L073RZ Devices */ + /* #define STM32L081xx */ /*!< */ + /* #define STM32L082xx */ /*!< */ + /* #define STM32L083xx */ /*!< */ +#endif + +/* Tip: To avoid modifying this file each time you need to switch between these + devices, you can define the device in your toolchain compiler preprocessor. + */ +#if !defined (USE_HAL_DRIVER) +/** + * @brief Comment the line below if you will not use the peripherals drivers. + In this case, these drivers will not be included and the application code will + be based on direct access to peripherals registers + */ + /*#define USE_HAL_DRIVER */ +#endif /* USE_HAL_DRIVER */ + +/** + * @brief CMSIS Device version number V1.4.0 + */ +#define __STM32L0xx_CMSIS_DEVICE_VERSION_MAIN (0x01) /*!< [31:24] main version */ +#define __STM32L0xx_CMSIS_DEVICE_VERSION_SUB1 (0x04) /*!< [23:16] sub1 version */ +#define __STM32L0xx_CMSIS_DEVICE_VERSION_SUB2 (0x00) /*!< [15:8] sub2 version */ +#define __STM32L0xx_CMSIS_DEVICE_VERSION_RC (0x00) /*!< [7:0] release candidate */ +#define __STM32L0xx_CMSIS_DEVICE_VERSION ((__CMSIS_DEVICE_VERSION_MAIN << 24)\ + |(__CMSIS_DEVICE_HAL_VERSION_SUB1 << 16)\ + |(__CMSIS_DEVICE_HAL_VERSION_SUB2 << 8 )\ + |(__CMSIS_DEVICE_HAL_VERSION_RC)) + +/** + * @} + */ + +/** @addtogroup Device_Included + * @{ + */ +#if defined(STM32L011xx) + #include "stm32l011xx.h" +#elif defined(STM32L021xx) + #include "stm32l021xx.h" +#elif defined(STM32L031xx) + #include "stm32l031xx.h" +#elif defined(STM32L041xx) + #include "stm32l041xx.h" +#elif defined(STM32L051xx) + #include "stm32l051xx.h" +#elif defined(STM32L052xx) + #include "stm32l052xx.h" +#elif defined(STM32L053xx) + #include "stm32l053xx.h" +#elif defined(STM32L062xx) + #include "stm32l062xx.h" +#elif defined(STM32L063xx) + #include "stm32l063xx.h" +#elif defined(STM32L061xx) + #include "stm32l061xx.h" +#elif defined(STM32L071xx) + #include "stm32l071xx.h" +#elif defined(STM32L072xx) + #include "stm32l072xx.h" +#elif defined(STM32L073xx) + #include "stm32l073xx.h" +#elif defined(STM32L082xx) + #include "stm32l082xx.h" +#elif defined(STM32L083xx) + #include "stm32l083xx.h" +#elif defined(STM32L081xx) + #include "stm32l081xx.h" +#else + #error "Please select first the target STM32L0xx device used in your application (in stm32l0xx.h file)" +#endif + +/** + * @} + */ + +/** @addtogroup Exported_types + * @{ + */ +typedef enum +{ + RESET = 0, + SET = !RESET +} FlagStatus, ITStatus; + +typedef enum +{ + DISABLE = 0, + ENABLE = !DISABLE +} FunctionalState; +#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE)) + +typedef enum +{ + ERROR = 0, + SUCCESS = !ERROR +} ErrorStatus; + +/** + * @} + */ + + +/** @addtogroup Exported_macro + * @{ + */ +#define SET_BIT(REG, BIT) ((REG) |= (BIT)) + +#define CLEAR_BIT(REG, BIT) ((REG) &= ~(BIT)) + +#define READ_BIT(REG, BIT) ((REG) & (BIT)) + +#define CLEAR_REG(REG) ((REG) = (0x0)) + +#define WRITE_REG(REG, VAL) ((REG) = (VAL)) + +#define READ_REG(REG) ((REG)) + +#define MODIFY_REG(REG, CLEARMASK, SETMASK) WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK))) + +#define POSITION_VAL(VAL) (__CLZ(__RBIT(VAL))) + +/** + * @} + */ + +#if defined (USE_HAL_DRIVER) + #include "stm32l0xx_hal.h" +#endif /* USE_HAL_DRIVER */ + +#ifdef __cplusplus +} +#endif /* __cplusplus */ + +#endif /* __STM32L0xx_H */ +/** + * @} + */ + +/** + * @} + */ + + + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/stm32l0xx_hal_conf.h b/src/stm32l0xx_hal_conf.h new file mode 100755 index 0000000..0cc9565 --- /dev/null +++ b/src/stm32l0xx_hal_conf.h @@ -0,0 +1,313 @@ +/** + ****************************************************************************** + * @file stm32l0xx_hal_conf.h + * @author MCD Application Team + * @version V1.7.0 + * @date 31-May-2016 + * @brief HAL configuration file. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L0xx_HAL_CONF_H +#define __STM32L0xx_HAL_CONF_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/* ########################## Module Selection ############################## */ +/** + * @brief This is the list of modules to be used in the HAL driver + */ +#define HAL_MODULE_ENABLED +#define HAL_ADC_MODULE_ENABLED +#define HAL_COMP_MODULE_ENABLED +#define HAL_CRC_MODULE_ENABLED +#define HAL_CRYP_MODULE_ENABLED +#if !defined (TARGET_STM32L031K6) && !defined (TARGET_STM32L011K4) +#define HAL_DAC_MODULE_ENABLED +#endif /* !TARGET_STM32L031K6 && !TARGET_STM32L011K4 */ +#define HAL_DMA_MODULE_ENABLED +#if !defined (TARGET_STM32L031K6) && !defined (TARGET_STM32L011K4) +#define HAL_FIREWALL_MODULE_ENABLED +#endif /* !TARGET_STM32L031K6 && !TARGET_STM32L011K4 */ +#define HAL_FLASH_MODULE_ENABLED +#define HAL_GPIO_MODULE_ENABLED +#define HAL_I2C_MODULE_ENABLED +#if !defined (TARGET_STM32L031K6) && !defined (TARGET_STM32L011K4) +#define HAL_I2S_MODULE_ENABLED +#endif /* !TARGET_STM32L031K6 && !TARGET_STM32L011K4 */ +#define HAL_IWDG_MODULE_ENABLED +#define HAL_LCD_MODULE_ENABLED +#define HAL_LPTIM_MODULE_ENABLED +#define HAL_PWR_MODULE_ENABLED +#define HAL_RCC_MODULE_ENABLED +#define HAL_RNG_MODULE_ENABLED +#define HAL_RTC_MODULE_ENABLED +#define HAL_SPI_MODULE_ENABLED +#define HAL_TIM_MODULE_ENABLED +#if !defined (TARGET_STM32L031K6) && !defined (TARGET_STM32L011K4) +#define HAL_TSC_MODULE_ENABLED +#endif /* !TARGET_STM32L031K6 && !TARGET_STM32L011K4 */ +#define HAL_UART_MODULE_ENABLED +#define HAL_USART_MODULE_ENABLED +#define HAL_IRDA_MODULE_ENABLED +#define HAL_SMARTCARD_MODULE_ENABLED +#define HAL_SMBUS_MODULE_ENABLED +#define HAL_WWDG_MODULE_ENABLED +#define HAL_CORTEX_MODULE_ENABLED +#if !defined (TARGET_STM32L031K6) && !defined (TARGET_STM32L011K4) +#define HAL_PCD_MODULE_ENABLED +#endif /* !TARGET_STM32L031K6 && !TARGET_STM32L011K4 */ + +/* ########################## Oscillator Values adaptation ####################*/ +/** + * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSE is used as system clock source, directly or through the PLL). + */ +#if !defined (HSE_VALUE) + #define HSE_VALUE ((uint32_t)8000000U) /*!< Value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (HSE_STARTUP_TIMEOUT) + #define HSE_STARTUP_TIMEOUT ((uint32_t)200) /*!< Time out for HSE start up, in ms */ +#endif /* HSE_STARTUP_TIMEOUT */ + +/** + * @brief Internal Multiple Speed oscillator (MSI) default value. + * This value is the default MSI range value after Reset. + */ +#if !defined (MSI_VALUE) + #define MSI_VALUE ((uint32_t)2000000U) /*!< Value of the Internal oscillator in Hz*/ +#endif /* MSI_VALUE */ +/** + * @brief Internal High Speed oscillator (HSI) value. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSI is used as system clock source, directly or through the PLL). + */ +#if !defined (HSI_VALUE) + #define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +/** + * @brief Internal High Speed oscillator for USB (HSI48) value. + */ +#if !defined (HSI48_VALUE) +#define HSI48_VALUE ((uint32_t)48000000U) /*!< Value of the Internal High Speed oscillator for USB in Hz. + The real value may vary depending on the variations + in voltage and temperature. */ +#endif /* HSI48_VALUE */ + +/** + * @brief Internal Low Speed oscillator (LSI) value. + */ +#if !defined (LSI_VALUE) + #define LSI_VALUE ((uint32_t)37000U) /*!< LSI Typical Value in Hz*/ +#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz + The real value may vary depending on the variations + in voltage and temperature.*/ +/** + * @brief External Low Speed oscillator (LSE) value. + * This value is used by the UART, RTC HAL module to compute the system frequency + */ +#if !defined (LSE_VALUE) + #define LSE_VALUE ((uint32_t)32768U) /*!< Value of the External oscillator in Hz*/ +#endif /* LSE_VALUE */ + + +#if !defined (LSE_STARTUP_TIMEOUT) + #define LSE_STARTUP_TIMEOUT ((uint32_t)5000U) /*!< Time out for LSE start up, in ms */ +#endif /* HSE_STARTUP_TIMEOUT */ + + +/* Tip: To avoid modifying this file each time you need to use different HSE, + === you can define the HSE value in your toolchain compiler preprocessor. */ + +/* ########################### System Configuration ######################### */ +/** + * @brief This is the HAL system configuration section + */ +#define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */ +#define TICK_INT_PRIORITY (((uint32_t)1U<<__NVIC_PRIO_BITS) - 1U) /*!< tick interrupt priority */ +#define USE_RTOS 0U +#define PREFETCH_ENABLE 1U +#define PREREAD_ENABLE 0U +#define BUFFER_CACHE_DISABLE 0U + +/* ########################## Assert Selection ############################## */ +/** + * @brief Uncomment the line below to expanse the "assert_param" macro in the + * HAL drivers code + */ +/* #define USE_FULL_ASSERT 1 */ + +/* Includes ------------------------------------------------------------------*/ +/** + * @brief Include module's header file + */ + +#ifdef HAL_RCC_MODULE_ENABLED + #include "stm32l0xx_hal_rcc.h" +#endif /* HAL_RCC_MODULE_ENABLED */ + +#ifdef HAL_GPIO_MODULE_ENABLED + #include "stm32l0xx_hal_gpio.h" +#endif /* HAL_GPIO_MODULE_ENABLED */ + +#ifdef HAL_DMA_MODULE_ENABLED + #include "stm32l0xx_hal_dma.h" +#endif /* HAL_DMA_MODULE_ENABLED */ + +#ifdef HAL_CORTEX_MODULE_ENABLED + #include "stm32l0xx_hal_cortex.h" +#endif /* HAL_CORTEX_MODULE_ENABLED */ + +#ifdef HAL_ADC_MODULE_ENABLED + #include "stm32l0xx_hal_adc.h" +#endif /* HAL_ADC_MODULE_ENABLED */ + +#ifdef HAL_COMP_MODULE_ENABLED + #include "stm32l0xx_hal_comp.h" +#endif /* HAL_COMP_MODULE_ENABLED */ + +#ifdef HAL_CRC_MODULE_ENABLED + #include "stm32l0xx_hal_crc.h" +#endif /* HAL_CRC_MODULE_ENABLED */ + +#ifdef HAL_CRYP_MODULE_ENABLED + #include "stm32l0xx_hal_cryp.h" +#endif /* HAL_CRYP_MODULE_ENABLED */ + +#ifdef HAL_DAC_MODULE_ENABLED + #include "stm32l0xx_hal_dac.h" +#endif /* HAL_DAC_MODULE_ENABLED */ + +#ifdef HAL_FIREWALL_MODULE_ENABLED + #include "stm32l0xx_hal_firewall.h" +#endif /* HAL_FIREWALL_MODULE_ENABLED */ + +#ifdef HAL_FLASH_MODULE_ENABLED + #include "stm32l0xx_hal_flash.h" +#endif /* HAL_FLASH_MODULE_ENABLED */ + +#ifdef HAL_I2C_MODULE_ENABLED + #include "stm32l0xx_hal_i2c.h" +#endif /* HAL_I2C_MODULE_ENABLED */ + +#ifdef HAL_I2S_MODULE_ENABLED + #include "stm32l0xx_hal_i2s.h" +#endif /* HAL_I2S_MODULE_ENABLED */ + +#ifdef HAL_IWDG_MODULE_ENABLED + #include "stm32l0xx_hal_iwdg.h" +#endif /* HAL_IWDG_MODULE_ENABLED */ + +#ifdef HAL_LCD_MODULE_ENABLED + #include "stm32l0xx_hal_lcd.h" +#endif /* HAL_LCD_MODULE_ENABLED */ + +#ifdef HAL_LPTIM_MODULE_ENABLED +#include "stm32l0xx_hal_lptim.h" +#endif /* HAL_LPTIM_MODULE_ENABLED */ + +#ifdef HAL_PWR_MODULE_ENABLED + #include "stm32l0xx_hal_pwr.h" +#endif /* HAL_PWR_MODULE_ENABLED */ + +#ifdef HAL_RNG_MODULE_ENABLED + #include "stm32l0xx_hal_rng.h" +#endif /* HAL_RNG_MODULE_ENABLED */ + +#ifdef HAL_RTC_MODULE_ENABLED + #include "stm32l0xx_hal_rtc.h" +#endif /* HAL_RTC_MODULE_ENABLED */ + +#ifdef HAL_SPI_MODULE_ENABLED + #include "stm32l0xx_hal_spi.h" +#endif /* HAL_SPI_MODULE_ENABLED */ + +#ifdef HAL_TIM_MODULE_ENABLED + #include "stm32l0xx_hal_tim.h" +#endif /* HAL_TIM_MODULE_ENABLED */ + +#ifdef HAL_TSC_MODULE_ENABLED + #include "stm32l0xx_hal_tsc.h" +#endif /* HAL_TSC_MODULE_ENABLED */ + +#ifdef HAL_UART_MODULE_ENABLED + #include "stm32l0xx_hal_uart.h" +#endif /* HAL_UART_MODULE_ENABLED */ + +#ifdef HAL_USART_MODULE_ENABLED + #include "stm32l0xx_hal_usart.h" +#endif /* HAL_USART_MODULE_ENABLED */ + +#ifdef HAL_IRDA_MODULE_ENABLED + #include "stm32l0xx_hal_irda.h" +#endif /* HAL_IRDA_MODULE_ENABLED */ + +#ifdef HAL_SMARTCARD_MODULE_ENABLED + #include "stm32l0xx_hal_smartcard.h" +#endif /* HAL_SMARTCARD_MODULE_ENABLED */ + +#ifdef HAL_SMBUS_MODULE_ENABLED + #include "stm32l0xx_hal_smbus.h" +#endif /* HAL_SMBUS_MODULE_ENABLED */ + +#ifdef HAL_WWDG_MODULE_ENABLED + #include "stm32l0xx_hal_wwdg.h" +#endif /* HAL_WWDG_MODULE_ENABLED */ + +#ifdef HAL_PCD_MODULE_ENABLED + #include "stm32l0xx_hal_pcd.h" +#endif /* HAL_PCD_MODULE_ENABLED */ + +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT +/* ALL MBED targets use same stm32_assert.h */ +#include "stm32_assert.h" +#else + #define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32L0xx_HAL_CONF_H */ + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/src/usb/cdc/inc/usbd_cdc_if.h b/src/usb/cdc/inc/usbd_cdc_if.h new file mode 100755 index 0000000..0245dd5 --- /dev/null +++ b/src/usb/cdc/inc/usbd_cdc_if.h @@ -0,0 +1,123 @@ +/** + ****************************************************************************** + * @file : usbd_cdc_if.h + * @brief : Header for usbd_cdc_if file. + ****************************************************************************** + * COPYRIGHT(c) 2016 STMicroelectronics + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** +*/ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __USBD_CDC_IF_H +#define __USBD_CDC_IF_H + +#ifdef __cplusplus + extern "C" { +#endif +/* Includes ------------------------------------------------------------------*/ +#include "usbd_cdc.h" +/* USER CODE BEGIN INCLUDE */ +/* USER CODE END INCLUDE */ + +/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY + * @{ + */ + +/** @defgroup USBD_CDC_IF + * @brief header + * @{ + */ + +/** @defgroup USBD_CDC_IF_Exported_Defines + * @{ + */ +/* USER CODE BEGIN EXPORTED_DEFINES */ +/* USER CODE END EXPORTED_DEFINES */ + +/** + * @} + */ + +/** @defgroup USBD_CDC_IF_Exported_Types + * @{ + */ +/* USER CODE BEGIN EXPORTED_TYPES */ +/* USER CODE END EXPORTED_TYPES */ + +/** + * @} + */ + +/** @defgroup USBD_CDC_IF_Exported_Macros + * @{ + */ +/* USER CODE BEGIN EXPORTED_MACRO */ +/* USER CODE END EXPORTED_MACRO */ + +/** + * @} + */ + +/** @defgroup USBD_AUDIO_IF_Exported_Variables + * @{ + */ +extern USBD_CDC_ItfTypeDef USBD_Interface_fops_FS; + +/* USER CODE BEGIN EXPORTED_VARIABLES */ +/* USER CODE END EXPORTED_VARIABLES */ + +/** + * @} + */ + +/** @defgroup USBD_CDC_IF_Exported_FunctionsPrototype + * @{ + */ +void CDC_Set_Uart_Obj(Uart_t *obj); + +uint8_t CDC_Transmit_FS(uint8_t* Buf, uint16_t Len); + +/* USER CODE BEGIN EXPORTED_FUNCTIONS */ +/* USER CODE END EXPORTED_FUNCTIONS */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __USBD_CDC_IF_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/usb/cdc/inc/usbd_conf.h b/src/usb/cdc/inc/usbd_conf.h new file mode 100755 index 0000000..d09a5c3 --- /dev/null +++ b/src/usb/cdc/inc/usbd_conf.h @@ -0,0 +1,174 @@ +/** + ****************************************************************************** + * @file : usbd_conf.h + * @version : v1.0_Cube + * @brief : Header for usbd_conf file. + ****************************************************************************** + * COPYRIGHT(c) 2016 STMicroelectronics + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** +*/ +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __USBD_CONF__H__ +#define __USBD_CONF__H__ +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include +#include +#include +#include "stm32l1xx.h" +#include "stm32l1xx_hal.h" +#include "usbd_def.h" + +/** @addtogroup USBD_OTG_DRIVER + * @{ + */ + +/** @defgroup USBD_CONF + * @brief usb otg low level driver configuration file + * @{ + */ + +/** @defgroup USBD_CONF_Exported_Defines + * @{ + */ + +/*---------- -----------*/ +#define USBD_MAX_NUM_INTERFACES 1 +/*---------- -----------*/ +#define USBD_MAX_NUM_CONFIGURATION 1 +/*---------- -----------*/ +#define USBD_MAX_STR_DESC_SIZ 512 +/*---------- -----------*/ +#define USBD_SUPPORT_USER_STRING 0 +/*---------- -----------*/ +#define USBD_DEBUG_LEVEL 0 +/*---------- -----------*/ +#define USBD_SELF_POWERED 1 +/*---------- -----------*/ +#define USBD_CDC_INTERVAL 1000 +/****************************************/ +/* #define for FS and HS identification */ +#define DEVICE_FS 0 + +/** @defgroup USBD_Exported_Macros + * @{ + */ + +/* Memory management macros */ +#define USBD_malloc (uint32_t *)USBD_static_malloc +#define USBD_free USBD_static_free +#define USBD_memset /* Not used */ +#define USBD_memcpy /* Not used */ + +#define USBD_Delay HAL_Delay + +/* For footprint reasons and since only one allocation is handled in the HID class + driver, the malloc/free is changed into a static allocation method */ +void *USBD_static_malloc(uint32_t size); +void USBD_static_free(void *p); + +/* DEBUG macros */ +#if (USBD_DEBUG_LEVEL > 0) +#define USBD_UsrLog(...) printf(__VA_ARGS__);\ + printf("\n"); +#else +#define USBD_UsrLog(...) +#endif + + +#if (USBD_DEBUG_LEVEL > 1) + +#define USBD_ErrLog(...) printf("ERROR: ") ;\ + printf(__VA_ARGS__);\ + printf("\n"); +#else +#define USBD_ErrLog(...) +#endif + + +#if (USBD_DEBUG_LEVEL > 2) +#define USBD_DbgLog(...) printf("DEBUG : ") ;\ + printf(__VA_ARGS__);\ + printf("\n"); +#else +#define USBD_DbgLog(...) +#endif + +/** + * @} + */ + + + +/** + * @} + */ + +/** @defgroup USBD_CONF_Exported_Types + * @{ + */ +/** + * @} + */ + +/** @defgroup USBD_CONF_Exported_Macros + * @{ + */ +/** + * @} + */ + +/** @defgroup USBD_CONF_Exported_Variables + * @{ + */ +/** + * @} + */ + +/** @defgroup USBD_CONF_Exported_FunctionsPrototype + * @{ + */ +/** + * @} + */ +#ifdef __cplusplus +} +#endif + +#endif /*__USBD_CONF__H__*/ + +/** + * @} + */ + +/** + * @} + */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/src/usb/cdc/inc/usbd_desc.h b/src/usb/cdc/inc/usbd_desc.h new file mode 100755 index 0000000..9db5eb8 --- /dev/null +++ b/src/usb/cdc/inc/usbd_desc.h @@ -0,0 +1,103 @@ +/** + ****************************************************************************** + * @file : usbd_desc.h + * @version : v1.0_Cube + * @brief : Header for usbd_desc file. + ****************************************************************************** + * COPYRIGHT(c) 2016 STMicroelectronics + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** +*/ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __USBD_DESC__H__ +#define __USBD_DESC__H__ + +#ifdef __cplusplus + extern "C" { +#endif +/* Includes ------------------------------------------------------------------*/ +#include "usbd_def.h" + +/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY + * @{ + */ + +/** @defgroup USB_DESC + * @brief general defines for the usb device library file + * @{ + */ + +/** @defgroup USB_DESC_Exported_Defines + * @{ + */ + +/** + * @} + */ + +/** @defgroup USBD_DESC_Exported_TypesDefinitions + * @{ + */ +/** + * @} + */ + +/** @defgroup USBD_DESC_Exported_Macros + * @{ + */ +/** + * @} + */ + +/** @defgroup USBD_DESC_Exported_Variables + * @{ + */ +extern USBD_DescriptorsTypeDef FS_Desc; +/** + * @} + */ + +/** @defgroup USBD_DESC_Exported_FunctionsPrototype + * @{ + */ + +/** + * @} + */ +#ifdef __cplusplus +} +#endif + +#endif /* __USBD_DESC_H */ + +/** + * @} + */ + +/** +* @} +*/ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/usb/cdc/src/usbd_cdc_if.c b/src/usb/cdc/src/usbd_cdc_if.c new file mode 100755 index 0000000..1c5dd4b --- /dev/null +++ b/src/usb/cdc/src/usbd_cdc_if.c @@ -0,0 +1,349 @@ +/** + ****************************************************************************** + * @file : usbd_cdc_if.c + * @brief : + ****************************************************************************** + * COPYRIGHT(c) 2016 STMicroelectronics + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** +*/ + +/* Includes ------------------------------------------------------------------*/ +#include "board.h" +#include "usbd_cdc_if.h" +/* USER CODE BEGIN INCLUDE */ +/* USER CODE END INCLUDE */ + +/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY + * @{ + */ + +/** @defgroup USBD_CDC + * @brief usbd core module + * @{ + */ + +/** @defgroup USBD_CDC_Private_TypesDefinitions + * @{ + */ +/* USER CODE BEGIN PRIVATE_TYPES */ +/* USER CODE END PRIVATE_TYPES */ +/** + * @} + */ + +/** @defgroup USBD_CDC_Private_Defines + * @{ + */ +/* USER CODE BEGIN PRIVATE_DEFINES */ +/* Define size for the receive and transmit buffer over CDC */ +/* It's up to user to redefine and/or remove those define */ +#define APP_RX_DATA_SIZE 64 +#define APP_TX_DATA_SIZE 64 + +#define FIFO_RX_SIZE 1024 + +/* USER CODE END PRIVATE_DEFINES */ +/** + * @} + */ + +/** @defgroup USBD_CDC_Private_Macros + * @{ + */ +/* USER CODE BEGIN PRIVATE_MACRO */ +/* USER CODE END PRIVATE_MACRO */ + +/** + * @} + */ + +/** @defgroup USBD_CDC_Private_Variables + * @{ + */ +/* Create buffer for reception and transmission */ +/* It's up to user to redefine and/or remove those define */ +/* Received Data over USB are stored in this buffer */ +uint8_t UserRxBufferFS[APP_RX_DATA_SIZE]; + +/* Send Data over USB CDC are stored in this buffer */ +uint8_t UserTxBufferFS[APP_TX_DATA_SIZE]; + +uint8_t FifoRxBuffer[FIFO_RX_SIZE]; + +/* USB handler declaration */ +/* Handle for USB Full Speed IP */ +USBD_HandleTypeDef *hUsbDevice_0; +/* USER CODE BEGIN PRIVATE_VARIABLES */ +/* USER CODE END PRIVATE_VARIABLES */ + +/** + * @} + */ + +/** @defgroup USBD_CDC_IF_Exported_Variables + * @{ + */ +extern USBD_HandleTypeDef hUsbDeviceFS; +/* USER CODE BEGIN EXPORTED_VARIABLES */ +/* USER CODE END EXPORTED_VARIABLES */ + +/** + * @} + */ + +/** @defgroup USBD_CDC_Private_FunctionPrototypes + * @{ + */ +static int8_t CDC_Init_FS (void); +static int8_t CDC_DeInit_FS (void); +static int8_t CDC_Control_FS (uint8_t cmd, uint8_t* pbuf, uint16_t length); +static int8_t CDC_Receive_FS (uint8_t* pbuf, uint32_t *Len); + +/* USER CODE BEGIN PRIVATE_FUNCTIONS_DECLARATION */ +/* USER CODE END PRIVATE_FUNCTIONS_DECLARATION */ + +/** + * @} + */ + +USBD_CDC_ItfTypeDef USBD_Interface_fops_FS = +{ + CDC_Init_FS, + CDC_DeInit_FS, + CDC_Control_FS, + CDC_Receive_FS +}; + +USBD_CDC_LineCodingTypeDef linecoding = + { + 115200, /* baud rate*/ + 0x01, /* stop bits-1*/ + 0x00, /* parity - none*/ + 0x08 /* nb. of bits 8*/ + }; + +Uart_t *UartObj; + +void CDC_Set_Uart_Obj( Uart_t *obj ) +{ + UartObj = obj; + + FifoInit( &obj->FifoRx, FifoRxBuffer, FIFO_RX_SIZE ); +} + +/* Private functions ---------------------------------------------------------*/ +/** + * @brief CDC_Init_FS + * Initializes the CDC media low layer over the FS USB IP + * @param None + * @retval Result of the operation: USBD_OK if all operations are OK else USBD_FAIL + */ +static int8_t CDC_Init_FS( void ) +{ + hUsbDevice_0 = &hUsbDeviceFS; + /* USER CODE BEGIN 3 */ + /* Set Application Buffers */ + USBD_CDC_SetTxBuffer( hUsbDevice_0, UserTxBufferFS, 0 ); + USBD_CDC_SetRxBuffer( hUsbDevice_0, UserRxBufferFS ); + return (USBD_OK); + /* USER CODE END 3 */ +} + +/** + * @brief CDC_DeInit_FS + * DeInitializes the CDC media low layer + * @param None + * @retval Result of the operation: USBD_OK if all operations are OK else USBD_FAIL + */ +static int8_t CDC_DeInit_FS( void ) +{ + /* USER CODE BEGIN 4 */ + return (USBD_OK); + /* USER CODE END 4 */ +} + +/** + * @brief CDC_Control_FS + * Manage the CDC class requests + * @param cmd: Command code + * @param pbuf: Buffer containing command data (request parameters) + * @param length: Number of data to be sent (in bytes) + * @retval Result of the operation: USBD_OK if all operations are OK else USBD_FAIL + */ +static int8_t CDC_Control_FS (uint8_t cmd, uint8_t* pbuf, uint16_t length) +{ + /* USER CODE BEGIN 5 */ + switch (cmd) + { + case CDC_SEND_ENCAPSULATED_COMMAND: + break; + + case CDC_GET_ENCAPSULATED_RESPONSE: + break; + + case CDC_SET_COMM_FEATURE: + break; + + case CDC_GET_COMM_FEATURE: + break; + + case CDC_CLEAR_COMM_FEATURE: + break; + + /*******************************************************************************/ + /* Line Coding Structure */ + /*-----------------------------------------------------------------------------*/ + /* Offset | Field | Size | Value | Description */ + /* 0 | dwDTERate | 4 | Number |Data terminal rate, in bits per second*/ + /* 4 | bCharFormat | 1 | Number | Stop bits */ + /* 0 - 1 Stop bit */ + /* 1 - 1.5 Stop bits */ + /* 2 - 2 Stop bits */ + /* 5 | bParityType | 1 | Number | Parity */ + /* 0 - None */ + /* 1 - Odd */ + /* 2 - Even */ + /* 3 - Mark */ + /* 4 - Space */ + /* 6 | bDataBits | 1 | Number Data bits (5, 6, 7, 8 or 16). */ + /*******************************************************************************/ + case CDC_SET_LINE_CODING: + linecoding.bitrate = (uint32_t)(pbuf[0] | (pbuf[1] << 8) |\ + (pbuf[2] << 16) | (pbuf[3] << 24)); + linecoding.format = pbuf[4]; + linecoding.paritytype = pbuf[5]; + linecoding.datatype = pbuf[6]; + break; + + case CDC_GET_LINE_CODING: + pbuf[0] = (uint8_t)(linecoding.bitrate); + pbuf[1] = (uint8_t)(linecoding.bitrate >> 8); + pbuf[2] = (uint8_t)(linecoding.bitrate >> 16); + pbuf[3] = (uint8_t)(linecoding.bitrate >> 24); + pbuf[4] = linecoding.format; + pbuf[5] = linecoding.paritytype; + pbuf[6] = linecoding.datatype; + break; + + case CDC_SET_CONTROL_LINE_STATE: + break; + + case CDC_SEND_BREAK: + break; + + default: + break; + } + + return (USBD_OK); + /* USER CODE END 5 */ +} + +/** + * @brief CDC_Transmit_FS + * Data send over USB IN endpoint are sent over CDC interface + * through this function. + * @note + * + * + * @param Buf: Buffer of data to be send + * @param Len: Number of data to be send (in bytes) + * @retval Result of the operation: USBD_OK if all operations are OK else USBD_FAIL or USBD_BUSY + */ +uint8_t CDC_Transmit_FS(uint8_t* buffer, uint16_t size) +{ + /* USER CODE BEGIN 7 */ + + uint16_t idx = 0; + uint16_t usbBufferSize = APP_TX_DATA_SIZE - 1; + + while( size > usbBufferSize ) + { + USBD_CDC_SetTxBuffer( hUsbDevice_0, buffer + idx, usbBufferSize ); + size -= usbBufferSize; + idx += usbBufferSize; + while( USBD_CDC_TransmitPacket( hUsbDevice_0 ) != USBD_OK ); + } + + if( size != 0 ) + { + USBD_CDC_SetTxBuffer( hUsbDevice_0, buffer + idx, size ); + while( USBD_CDC_TransmitPacket( hUsbDevice_0 ) != USBD_OK ); + } + + /* USER CODE END 7 */ + return USBD_OK; +} + +/* USER CODE BEGIN PRIVATE_FUNCTIONS_IMPLEMENTATION */ +/* USER CODE END PRIVATE_FUNCTIONS_IMPLEMENTATION */ + +/** + * @brief CDC_Receive_FS + * Data received over USB OUT endpoint are sent over CDC interface + * through this function. + * + * @note + * This function will block any OUT packet reception on USB endpoint + * untill exiting this function. If you exit this function before transfer + * is complete on CDC interface (ie. using DMA controller) it will result + * in receiving more data while previous ones are still not sent. + * + * @param Buf: Buffer of data to be received + * @param Len: Number of data received (in bytes) + * @retval Result of the operation: USBD_OK if all operations are OK else USBD_FAIL + */ +int8_t CDC_Receive_FS (uint8_t* Buf, uint32_t *Len) +{ + uint8_t i; + + for( i = 0; i < *Len; i++ ) + { + if( IsFifoFull( &UartObj->FifoRx ) == false ) + { + // Read one byte from the receive data register + FifoPush( &UartObj->FifoRx, Buf[i] ); + } + } + if( UartObj->IrqNotify != NULL ) + { + UartObj->IrqNotify( UART_NOTIFY_RX ); + } + USBD_CDC_SetRxBuffer(hUsbDevice_0, Buf); + USBD_CDC_ReceivePacket(hUsbDevice_0); + return (USBD_OK); +} + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/src/usb/cdc/src/usbd_conf.c b/src/usb/cdc/src/usbd_conf.c new file mode 100755 index 0000000..90cc291 --- /dev/null +++ b/src/usb/cdc/src/usbd_conf.c @@ -0,0 +1,508 @@ +/** + ****************************************************************************** + * @file : usbd_conf.c + * @version : v1.0_Cube + * @brief : This file implements the board support package for the USB device library + ****************************************************************************** + * + * COPYRIGHT(c) 2016 STMicroelectronics + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** +*/ +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx.h" +#include "stm32l1xx_hal.h" +#include "usbd_def.h" +#include "usbd_core.h" +#include "usbd_cdc.h" +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +PCD_HandleTypeDef hpcd_USB_FS; + +/* USER CODE BEGIN 0 */ + +/* USER CODE END 0 */ + +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ +/* USER CODE BEGIN 1 */ + +/* USER CODE END 1 */ +void HAL_PCDEx_SetConnectionState(PCD_HandleTypeDef *hpcd, uint8_t state); + +/******************************************************************************* + LL Driver Callbacks (PCD -> USB Device Library) +*******************************************************************************/ +/* MSP Init */ + +void HAL_PCD_MspInit(PCD_HandleTypeDef* pcdHandle) +{ + if(pcdHandle->Instance==USB) + { + /* USER CODE BEGIN USB_MspInit 0 */ + + /* USER CODE END USB_MspInit 0 */ + /* Peripheral clock enable */ + __HAL_RCC_USB_CLK_ENABLE(); + + /* Peripheral interrupt init */ + HAL_NVIC_SetPriority(USB_LP_IRQn, 0, 0); + HAL_NVIC_EnableIRQ(USB_LP_IRQn); + /* USER CODE BEGIN USB_MspInit 1 */ + + /* USER CODE END USB_MspInit 1 */ + } +} + +void HAL_PCD_MspDeInit(PCD_HandleTypeDef* pcdHandle) +{ + if(pcdHandle->Instance==USB) + { + /* USER CODE BEGIN USB_MspDeInit 0 */ + + /* USER CODE END USB_MspDeInit 0 */ + /* Peripheral clock disable */ + __HAL_RCC_USB_CLK_DISABLE(); + + /* Peripheral interrupt Deinit*/ + HAL_NVIC_DisableIRQ(USB_LP_IRQn); + + /* USER CODE BEGIN USB_MspDeInit 1 */ + + /* USER CODE END USB_MspDeInit 1 */ + } +} + +/** + * @brief Setup stage callback + * @param hpcd: PCD handle + * @retval None + */ +void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd) +{ + USBD_LL_SetupStage((USBD_HandleTypeDef*)hpcd->pData, (uint8_t *)hpcd->Setup); +} + +/** + * @brief Data Out stage callback. + * @param hpcd: PCD handle + * @param epnum: Endpoint Number + * @retval None + */ +void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) +{ + USBD_LL_DataOutStage((USBD_HandleTypeDef*)hpcd->pData, epnum, hpcd->OUT_ep[epnum].xfer_buff); +} + +/** + * @brief Data In stage callback.. + * @param hpcd: PCD handle + * @param epnum: Endpoint Number + * @retval None + */ +void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) +{ + USBD_LL_DataInStage((USBD_HandleTypeDef*)hpcd->pData, epnum, hpcd->IN_ep[epnum].xfer_buff); +} + +/** + * @brief SOF callback. + * @param hpcd: PCD handle + * @retval None + */ +void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd) +{ + USBD_LL_SOF((USBD_HandleTypeDef*)hpcd->pData); +} + +/** + * @brief Reset callback. + * @param hpcd: PCD handle + * @retval None + */ +void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd) +{ + USBD_SpeedTypeDef speed = USBD_SPEED_FULL; + + /*Set USB Current Speed*/ + switch (hpcd->Init.speed) + { + case PCD_SPEED_FULL: + speed = USBD_SPEED_FULL; + break; + + default: + speed = USBD_SPEED_FULL; + break; + } + USBD_LL_SetSpeed((USBD_HandleTypeDef*)hpcd->pData, speed); + + /*Reset Device*/ + USBD_LL_Reset((USBD_HandleTypeDef*)hpcd->pData); +} + +/** + * @brief Suspend callback. + * When Low power mode is enabled the debug cannot be used (IAR, Keil doesn't support it) + * @param hpcd: PCD handle + * @retval None + */ +void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd) +{ + /* Inform USB library that core enters in suspend Mode */ + USBD_LL_Suspend((USBD_HandleTypeDef*)hpcd->pData); + /*Enter in STOP mode */ + /* USER CODE BEGIN 2 */ + if (hpcd->Init.low_power_enable) + { + /* Set SLEEPDEEP bit and SleepOnExit of Cortex System Control Register */ + SCB->SCR |= (uint32_t)((uint32_t)(SCB_SCR_SLEEPDEEP_Msk | SCB_SCR_SLEEPONEXIT_Msk)); + } + /* USER CODE END 2 */ +} + +/** + * @brief Resume callback. + * When Low power mode is enabled the debug cannot be used (IAR, Keil doesn't support it) + * @param hpcd: PCD handle + * @retval None + */ +void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd) +{ + /* USER CODE BEGIN 3 */ + + /* USER CODE END 3 */ + USBD_LL_Resume((USBD_HandleTypeDef*)hpcd->pData); + +} + +/** + * @brief ISOOUTIncomplete callback. + * @param hpcd: PCD handle + * @param epnum: Endpoint Number + * @retval None + */ +void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) +{ + USBD_LL_IsoOUTIncomplete((USBD_HandleTypeDef*)hpcd->pData, epnum); +} + +/** + * @brief ISOINIncomplete callback. + * @param hpcd: PCD handle + * @param epnum: Endpoint Number + * @retval None + */ +void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) +{ + USBD_LL_IsoINIncomplete((USBD_HandleTypeDef*)hpcd->pData, epnum); +} + +/** + * @brief ConnectCallback callback. + * @param hpcd: PCD handle + * @retval None + */ +void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd) +{ + USBD_LL_DevConnected((USBD_HandleTypeDef*)hpcd->pData); +} + +/** + * @brief Disconnect callback. + * @param hpcd: PCD handle + * @retval None + */ +void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd) +{ + USBD_LL_DevDisconnected((USBD_HandleTypeDef*)hpcd->pData); +} + +/******************************************************************************* + LL Driver Interface (USB Device Library --> PCD) +*******************************************************************************/ +/** + * @brief Initializes the Low Level portion of the Device driver. + * @param pdev: Device handle + * @retval USBD Status + */ +USBD_StatusTypeDef USBD_LL_Init (USBD_HandleTypeDef *pdev) +{ + /* Init USB_IP */ + /* Link The driver to the stack */ + hpcd_USB_FS.pData = pdev; + pdev->pData = &hpcd_USB_FS; + + hpcd_USB_FS.Instance = USB; + hpcd_USB_FS.Init.dev_endpoints = 8; + hpcd_USB_FS.Init.speed = PCD_SPEED_FULL; + hpcd_USB_FS.Init.ep0_mps = DEP0CTL_MPS_8; + hpcd_USB_FS.Init.phy_itface = PCD_PHY_EMBEDDED; + hpcd_USB_FS.Init.low_power_enable = DISABLE; + hpcd_USB_FS.Init.battery_charging_enable = DISABLE; + HAL_PCD_Init(&hpcd_USB_FS); + + HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , 0x00 , PCD_SNG_BUF, 0x18); + HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , 0x80 , PCD_SNG_BUF, 0x58); + HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , 0x81 , PCD_SNG_BUF, 0xC0); + HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , 0x01 , PCD_SNG_BUF, 0x110); + HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , 0x82 , PCD_SNG_BUF, 0x100); + return USBD_OK; +} + +/** + * @brief De-Initializes the Low Level portion of the Device driver. + * @param pdev: Device handle + * @retval USBD Status + */ +USBD_StatusTypeDef USBD_LL_DeInit (USBD_HandleTypeDef *pdev) +{ + HAL_PCD_DeInit((PCD_HandleTypeDef*)pdev->pData); + return USBD_OK; +} + +/** + * @brief Starts the Low Level portion of the Device driver. + * @param pdev: Device handle + * @retval USBD Status + */ +USBD_StatusTypeDef USBD_LL_Start(USBD_HandleTypeDef *pdev) +{ + HAL_PCD_Start((PCD_HandleTypeDef*)pdev->pData); + return USBD_OK; +} + +/** + * @brief Stops the Low Level portion of the Device driver. + * @param pdev: Device handle + * @retval USBD Status + */ +USBD_StatusTypeDef USBD_LL_Stop (USBD_HandleTypeDef *pdev) +{ + HAL_PCD_Stop((PCD_HandleTypeDef*) pdev->pData); + return USBD_OK; +} + +/** + * @brief Opens an endpoint of the Low Level Driver. + * @param pdev: Device handle + * @param ep_addr: Endpoint Number + * @param ep_type: Endpoint Type + * @param ep_mps: Endpoint Max Packet Size + * @retval USBD Status + */ +USBD_StatusTypeDef USBD_LL_OpenEP (USBD_HandleTypeDef *pdev, + uint8_t ep_addr, + uint8_t ep_type, + uint16_t ep_mps) +{ + HAL_PCD_EP_Open((PCD_HandleTypeDef*) pdev->pData, + ep_addr, + ep_mps, + ep_type); + + return USBD_OK; +} + +/** + * @brief Closes an endpoint of the Low Level Driver. + * @param pdev: Device handle + * @param ep_addr: Endpoint Number + * @retval USBD Status + */ +USBD_StatusTypeDef USBD_LL_CloseEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr) +{ + HAL_PCD_EP_Close((PCD_HandleTypeDef*) pdev->pData, ep_addr); + return USBD_OK; +} + +/** + * @brief Flushes an endpoint of the Low Level Driver. + * @param pdev: Device handle + * @param ep_addr: Endpoint Number + * @retval USBD Status + */ +USBD_StatusTypeDef USBD_LL_FlushEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr) +{ + HAL_PCD_EP_Flush((PCD_HandleTypeDef*) pdev->pData, ep_addr); + return USBD_OK; +} + +/** + * @brief Sets a Stall condition on an endpoint of the Low Level Driver. + * @param pdev: Device handle + * @param ep_addr: Endpoint Number + * @retval USBD Status + */ +USBD_StatusTypeDef USBD_LL_StallEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr) +{ + HAL_PCD_EP_SetStall((PCD_HandleTypeDef*) pdev->pData, ep_addr); + return USBD_OK; +} + +/** + * @brief Clears a Stall condition on an endpoint of the Low Level Driver. + * @param pdev: Device handle + * @param ep_addr: Endpoint Number + * @retval USBD Status + */ +USBD_StatusTypeDef USBD_LL_ClearStallEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr) +{ + HAL_PCD_EP_ClrStall((PCD_HandleTypeDef*) pdev->pData, ep_addr); + return USBD_OK; +} + +/** + * @brief Returns Stall condition. + * @param pdev: Device handle + * @param ep_addr: Endpoint Number + * @retval Stall (1: Yes, 0: No) + */ +uint8_t USBD_LL_IsStallEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr) +{ + PCD_HandleTypeDef *hpcd = (PCD_HandleTypeDef*) pdev->pData; + + if((ep_addr & 0x80) == 0x80) + { + return hpcd->IN_ep[ep_addr & 0x7F].is_stall; + } + else + { + return hpcd->OUT_ep[ep_addr & 0x7F].is_stall; + } +} +/** + * @brief Assigns a USB address to the device. + * @param pdev: Device handle + * @param ep_addr: Endpoint Number + * @retval USBD Status + */ +USBD_StatusTypeDef USBD_LL_SetUSBAddress (USBD_HandleTypeDef *pdev, uint8_t dev_addr) +{ + HAL_PCD_SetAddress((PCD_HandleTypeDef*) pdev->pData, dev_addr); + return USBD_OK; +} + +/** + * @brief Transmits data over an endpoint. + * @param pdev: Device handle + * @param ep_addr: Endpoint Number + * @param pbuf: Pointer to data to be sent + * @param size: Data size + * @retval USBD Status + */ +USBD_StatusTypeDef USBD_LL_Transmit (USBD_HandleTypeDef *pdev, + uint8_t ep_addr, + uint8_t *pbuf, + uint16_t size) +{ + HAL_PCD_EP_Transmit((PCD_HandleTypeDef*) pdev->pData, ep_addr, pbuf, size); + return USBD_OK; +} + +/** + * @brief Prepares an endpoint for reception. + * @param pdev: Device handle + * @param ep_addr: Endpoint Number + * @param pbuf: Pointer to data to be received + * @param size: Data size + * @retval USBD Status + */ +USBD_StatusTypeDef USBD_LL_PrepareReceive(USBD_HandleTypeDef *pdev, + uint8_t ep_addr, + uint8_t *pbuf, + uint16_t size) +{ + HAL_PCD_EP_Receive((PCD_HandleTypeDef*) pdev->pData, ep_addr, pbuf, size); + return USBD_OK; +} + +/** + * @brief Returns the last transfered packet size. + * @param pdev: Device handle + * @param ep_addr: Endpoint Number + * @retval Recived Data Size + */ +uint32_t USBD_LL_GetRxDataSize (USBD_HandleTypeDef *pdev, uint8_t ep_addr) +{ + return HAL_PCD_EP_GetRxCount((PCD_HandleTypeDef*) pdev->pData, ep_addr); +} + +/** + * @brief Delays routine for the USB Device Library. + * @param Delay: Delay in ms + * @retval None + */ +void USBD_LL_Delay (uint32_t Delay) +{ + HAL_Delay(Delay); +} + +/** + * @brief static single allocation. + * @param size: size of allocated memory + * @retval None + */ +void *USBD_static_malloc(uint32_t size) +{ + static uint32_t mem[(sizeof(USBD_CDC_HandleTypeDef)/4)+1];/* On 32-bit boundary */ + return mem; +} + +/** + * @brief Dummy memory free + * @param *p pointer to allocated memory address + * @retval None + */ +void USBD_static_free(void *p) +{ + +} + +/** +* @brief Software Device Connection +* @param hpcd: PCD handle +* @param state: connection state (0 : disconnected / 1: connected) +* @retval None +*/ +void HAL_PCDEx_SetConnectionState(PCD_HandleTypeDef *hpcd, uint8_t state) +{ +/* USER CODE BEGIN 5 */ + if (state == 1) + { + /* Configure Low Connection State */ + __HAL_SYSCFG_USBPULLUP_ENABLE(); + } + else + { + /* Configure High Connection State */ + __HAL_SYSCFG_USBPULLUP_DISABLE(); + } +/* USER CODE END 5 */ +} + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/usb/cdc/src/usbd_desc.c b/src/usb/cdc/src/usbd_desc.c new file mode 100755 index 0000000..d0575b2 --- /dev/null +++ b/src/usb/cdc/src/usbd_desc.c @@ -0,0 +1,297 @@ +/** + ****************************************************************************** + * @file : usbd_desc.c + * @version : v1.0_Cube + * @brief : This file implements the USB Device descriptors + ****************************************************************************** + * + * COPYRIGHT(c) 2016 STMicroelectronics + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** +*/ + +/* Includes ------------------------------------------------------------------*/ +#include "usbd_core.h" +#include "usbd_desc.h" +#include "usbd_conf.h" + +/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY + * @{ + */ + +/** @defgroup USBD_DESC + * @brief USBD descriptors module + * @{ + */ + +/** @defgroup USBD_DESC_Private_TypesDefinitions + * @{ + */ +/** + * @} + */ + +/** @defgroup USBD_DESC_Private_Defines + * @{ + */ +#define USBD_VID 1155 +#define USBD_LANGID_STRING 1033 +#define USBD_MANUFACTURER_STRING "STMicroelectronics" +#define USBD_PID_FS 22336 +#define USBD_PRODUCT_STRING_FS "STM32 Virtual ComPort" +#define USBD_SERIALNUMBER_STRING_FS "00000000001A" +#define USBD_CONFIGURATION_STRING_FS "CDC Config" +#define USBD_INTERFACE_STRING_FS "CDC Interface" + +/* USER CODE BEGIN 0 */ + +/* USER CODE END 0*/ +/** + * @} + */ + +/** @defgroup USBD_DESC_Private_Macros + * @{ + */ +/** + * @} + */ + +/** @defgroup USBD_DESC_Private_Variables + * @{ + */ +uint8_t * USBD_FS_DeviceDescriptor( USBD_SpeedTypeDef speed , uint16_t *length); +uint8_t * USBD_FS_LangIDStrDescriptor( USBD_SpeedTypeDef speed , uint16_t *length); +uint8_t * USBD_FS_ManufacturerStrDescriptor ( USBD_SpeedTypeDef speed , uint16_t *length); +uint8_t * USBD_FS_ProductStrDescriptor ( USBD_SpeedTypeDef speed , uint16_t *length); +uint8_t * USBD_FS_SerialStrDescriptor( USBD_SpeedTypeDef speed , uint16_t *length); +uint8_t * USBD_FS_ConfigStrDescriptor( USBD_SpeedTypeDef speed , uint16_t *length); +uint8_t * USBD_FS_InterfaceStrDescriptor( USBD_SpeedTypeDef speed , uint16_t *length); + +#ifdef USB_SUPPORT_USER_STRING_DESC +uint8_t * USBD_FS_USRStringDesc (USBD_SpeedTypeDef speed, uint8_t idx , uint16_t *length); +#endif /* USB_SUPPORT_USER_STRING_DESC */ + +USBD_DescriptorsTypeDef FS_Desc = +{ + USBD_FS_DeviceDescriptor, + USBD_FS_LangIDStrDescriptor, + USBD_FS_ManufacturerStrDescriptor, + USBD_FS_ProductStrDescriptor, + USBD_FS_SerialStrDescriptor, + USBD_FS_ConfigStrDescriptor, + USBD_FS_InterfaceStrDescriptor, +}; + +#if defined ( __ICCARM__ ) /*!< IAR Compiler */ + #pragma data_alignment=4 +#endif +/* USB Standard Device Descriptor */ +__ALIGN_BEGIN uint8_t USBD_FS_DeviceDesc[USB_LEN_DEV_DESC] __ALIGN_END = + { + 0x12, /*bLength */ + USB_DESC_TYPE_DEVICE, /*bDescriptorType*/ + 0x00, /* bcdUSB */ + 0x02, + 0x02, /*bDeviceClass*/ + 0x02, /*bDeviceSubClass*/ + 0x00, /*bDeviceProtocol*/ + USB_MAX_EP0_SIZE, /*bMaxPacketSize*/ + LOBYTE(USBD_VID), /*idVendor*/ + HIBYTE(USBD_VID), /*idVendor*/ + LOBYTE(USBD_PID_FS), /*idVendor*/ + HIBYTE(USBD_PID_FS), /*idVendor*/ + 0x00, /*bcdDevice rel. 2.00*/ + 0x02, + USBD_IDX_MFC_STR, /*Index of manufacturer string*/ + USBD_IDX_PRODUCT_STR, /*Index of product string*/ + USBD_IDX_SERIAL_STR, /*Index of serial number string*/ + USBD_MAX_NUM_CONFIGURATION /*bNumConfigurations*/ + } ; +/* USB_DeviceDescriptor */ + +#if defined ( __ICCARM__ ) /*!< IAR Compiler */ + #pragma data_alignment=4 +#endif + +/* USB Standard Device Descriptor */ +__ALIGN_BEGIN uint8_t USBD_LangIDDesc[USB_LEN_LANGID_STR_DESC] __ALIGN_END = +{ + USB_LEN_LANGID_STR_DESC, + USB_DESC_TYPE_STRING, + LOBYTE(USBD_LANGID_STRING), + HIBYTE(USBD_LANGID_STRING), +}; + +#if defined ( __ICCARM__ ) /*!< IAR Compiler */ + #pragma data_alignment=4 +#endif +__ALIGN_BEGIN uint8_t USBD_StrDesc[USBD_MAX_STR_DESC_SIZ] __ALIGN_END; +/** + * @} + */ + +/** @defgroup USBD_DESC_Private_FunctionPrototypes + * @{ + */ +/** + * @} + */ + +/** @defgroup USBD_DESC_Private_Functions + * @{ + */ + +/** +* @brief USBD_FS_DeviceDescriptor +* return the device descriptor +* @param speed : current device speed +* @param length : pointer to data length variable +* @retval pointer to descriptor buffer +*/ +uint8_t * USBD_FS_DeviceDescriptor( USBD_SpeedTypeDef speed , uint16_t *length) +{ + *length = sizeof(USBD_FS_DeviceDesc); + return USBD_FS_DeviceDesc; +} + +/** +* @brief USBD_FS_LangIDStrDescriptor +* return the LangID string descriptor +* @param speed : current device speed +* @param length : pointer to data length variable +* @retval pointer to descriptor buffer +*/ +uint8_t * USBD_FS_LangIDStrDescriptor( USBD_SpeedTypeDef speed , uint16_t *length) +{ + *length = sizeof(USBD_LangIDDesc); + return USBD_LangIDDesc; +} + +/** +* @brief USBD_FS_ProductStrDescriptor +* return the product string descriptor +* @param speed : current device speed +* @param length : pointer to data length variable +* @retval pointer to descriptor buffer +*/ +uint8_t * USBD_FS_ProductStrDescriptor( USBD_SpeedTypeDef speed , uint16_t *length) +{ + if(speed == 0) + { + USBD_GetString (USBD_PRODUCT_STRING_FS, USBD_StrDesc, length); + } + else + { + USBD_GetString (USBD_PRODUCT_STRING_FS, USBD_StrDesc, length); + } + return USBD_StrDesc; +} + +/** +* @brief USBD_FS_ManufacturerStrDescriptor +* return the manufacturer string descriptor +* @param speed : current device speed +* @param length : pointer to data length variable +* @retval pointer to descriptor buffer +*/ +uint8_t * USBD_FS_ManufacturerStrDescriptor( USBD_SpeedTypeDef speed , uint16_t *length) +{ + USBD_GetString (USBD_MANUFACTURER_STRING, USBD_StrDesc, length); + return USBD_StrDesc; +} + +/** +* @brief USBD_FS_SerialStrDescriptor +* return the serial number string descriptor +* @param speed : current device speed +* @param length : pointer to data length variable +* @retval pointer to descriptor buffer +*/ +uint8_t * USBD_FS_SerialStrDescriptor( USBD_SpeedTypeDef speed , uint16_t *length) +{ + if(speed == USBD_SPEED_HIGH) + { + USBD_GetString (USBD_SERIALNUMBER_STRING_FS, USBD_StrDesc, length); + } + else + { + USBD_GetString (USBD_SERIALNUMBER_STRING_FS, USBD_StrDesc, length); + } + return USBD_StrDesc; +} + +/** +* @brief USBD_FS_ConfigStrDescriptor +* return the configuration string descriptor +* @param speed : current device speed +* @param length : pointer to data length variable +* @retval pointer to descriptor buffer +*/ +uint8_t * USBD_FS_ConfigStrDescriptor( USBD_SpeedTypeDef speed , uint16_t *length) +{ + if(speed == USBD_SPEED_HIGH) + { + USBD_GetString (USBD_CONFIGURATION_STRING_FS, USBD_StrDesc, length); + } + else + { + USBD_GetString (USBD_CONFIGURATION_STRING_FS, USBD_StrDesc, length); + } + return USBD_StrDesc; +} + +/** +* @brief USBD_HS_InterfaceStrDescriptor +* return the interface string descriptor +* @param speed : current device speed +* @param length : pointer to data length variable +* @retval pointer to descriptor buffer +*/ +uint8_t * USBD_FS_InterfaceStrDescriptor( USBD_SpeedTypeDef speed , uint16_t *length) +{ + if(speed == 0) + { + USBD_GetString (USBD_INTERFACE_STRING_FS, USBD_StrDesc, length); + } + else + { + USBD_GetString (USBD_INTERFACE_STRING_FS, USBD_StrDesc, length); + } + return USBD_StrDesc; +} +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/usb/dfu/inc/usbd_conf.h b/src/usb/dfu/inc/usbd_conf.h new file mode 100755 index 0000000..5902e79 --- /dev/null +++ b/src/usb/dfu/inc/usbd_conf.h @@ -0,0 +1,121 @@ +/** + ****************************************************************************** + * @file USB_Device/DFU_Standalone/Inc/usbd_conf.h + * @author MCD Application Team + * @version V1.5.0 + * @date 04-March-2016 + * @brief General low level driver configuration + ****************************************************************************** + * @attention + * + *

© Copyright © 2016 STMicroelectronics International N.V. + * All rights reserved.

+ * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted, provided that the following conditions are met: + * + * 1. Redistribution of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of other + * contributors to this software may be used to endorse or promote products + * derived from this software without specific written permission. + * 4. This software, including modifications and/or derivative works of this + * software, must execute solely and exclusively on microcontroller or + * microprocessor devices manufactured by or for STMicroelectronics. + * 5. Redistribution and use of this software other than as permitted under + * this license is void and will automatically terminate your rights under + * this license. + * + * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A + * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY + * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT + * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, + * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, + * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __USBD_CONF_H +#define __USBD_CONF_H + +/* Includes ------------------------------------------------------------------*/ +#include +#include +#include +#include "stm32l1xx.h" +#include "stm32l1xx_hal.h" +#include "usbd_def.h" + + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/* Common Config */ +/* Maximum number of supported media : Flash */ +#define USBD_MAX_NUM_INTERFACES 1 +#define USBD_MAX_NUM_CONFIGURATION 1 +#define USBD_MAX_STR_DESC_SIZ 0x100 +#define USBD_SUPPORT_USER_STRING 1 +#define USBD_SELF_POWERED 1 +#define USBD_DEBUG_LEVEL 0 + +/* DFU Class Config */ +#define USBD_DFU_MAX_ITF_NUM 1 +#define USBD_DFU_XFER_SIZE 1024 /* Max DFU Packet Size = 1024 bytes */ +#define USBD_DFU_APP_DEFAULT_ADD 0x08007000 /*ADDR_FLASH_PAGE_14*/ +#define USBD_DFU_APP_END_ADD 0x08020000 /*ADDR_FLASH_PAGE_64*/ +/* Exported macro ------------------------------------------------------------*/ +/* Memory management macros */ +/* For footprint reasons and since only one allocation is handled in the DFU class + driver, the malloc/free is changed into a static allocation method */ + +void *USBD_static_malloc(uint32_t size); +void USBD_static_free(void *p); + +#define MAX_STATIC_ALLOC_SIZE 262 /*DFU Class Driver Structure size*/ + +#define USBD_malloc (uint32_t *)USBD_static_malloc +#define USBD_free USBD_static_free +#define USBD_memset /* Not used */ +#define USBD_memcpy /* Not used */ +#define USBD_Delay HAL_Delay + +/* DEBUG macros */ +#if (USBD_DEBUG_LEVEL > 0) +#define USBD_UsrLog(...) printf(__VA_ARGS__);\ + printf("\n"); +#else +#define USBD_UsrLog(...) +#endif + +#if (USBD_DEBUG_LEVEL > 1) + +#define USBD_ErrLog(...) printf("ERROR: ") ;\ + printf(__VA_ARGS__);\ + printf("\n"); +#else +#define USBD_ErrLog(...) +#endif + +#if (USBD_DEBUG_LEVEL > 2) +#define USBD_DbgLog(...) printf("DEBUG : ") ;\ + printf(__VA_ARGS__);\ + printf("\n"); +#else +#define USBD_DbgLog(...) +#endif +/* Exported functions ------------------------------------------------------- */ + +#endif /* __USBD_CONF_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/usb/dfu/inc/usbd_desc.h b/src/usb/dfu/inc/usbd_desc.h new file mode 100755 index 0000000..d5b49a9 --- /dev/null +++ b/src/usb/dfu/inc/usbd_desc.h @@ -0,0 +1,68 @@ +/** + ****************************************************************************** + * @file USB_Device/DFU_Standalone/Inc/usbd_desc.h + * @author MCD Application Team + * @version V1.5.0 + * @date 04-March-2016 + * @brief Header for usbd_desc.c module + ****************************************************************************** + * @attention + * + *

© Copyright © 2016 STMicroelectronics International N.V. + * All rights reserved.

+ * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted, provided that the following conditions are met: + * + * 1. Redistribution of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of other + * contributors to this software may be used to endorse or promote products + * derived from this software without specific written permission. + * 4. This software, including modifications and/or derivative works of this + * software, must execute solely and exclusively on microcontroller or + * microprocessor devices manufactured by or for STMicroelectronics. + * 5. Redistribution and use of this software other than as permitted under + * this license is void and will automatically terminate your rights under + * this license. + * + * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A + * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY + * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT + * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, + * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, + * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __USBD_DESC_H +#define __USBD_DESC_H + +/* Includes ------------------------------------------------------------------*/ +#include "usbd_def.h" + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +#define DEVICE_ID1 (0x1FF80050) +#define DEVICE_ID2 (0x1FF80054) +#define DEVICE_ID3 (0x1FF80064) + +#define USB_SIZ_STRING_SERIAL 0x1A +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions ------------------------------------------------------- */ +extern USBD_DescriptorsTypeDef DFU_Desc; + +#endif /* __USBD_DESC_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/usb/dfu/inc/usbd_dfu_flash.h b/src/usb/dfu/inc/usbd_dfu_flash.h new file mode 100755 index 0000000..c0dbc49 --- /dev/null +++ b/src/usb/dfu/inc/usbd_dfu_flash.h @@ -0,0 +1,66 @@ +/** + ****************************************************************************** + * @file usbd_dfu_flash.h + * @author MCD Application Team + * @version V1.5.0 + * @date 04-March-2016 + * @brief Header for usbd_dfu_flash.c file. + ****************************************************************************** + * @attention + * + *

© Copyright © 2016 STMicroelectronics International N.V. + * All rights reserved.

+ * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted, provided that the following conditions are met: + * + * 1. Redistribution of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of other + * contributors to this software may be used to endorse or promote products + * derived from this software without specific written permission. + * 4. This software, including modifications and/or derivative works of this + * software, must execute solely and exclusively on microcontroller or + * microprocessor devices manufactured by or for STMicroelectronics. + * 5. Redistribution and use of this software other than as permitted under + * this license is void and will automatically terminate your rights under + * this license. + * + * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A + * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY + * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT + * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, + * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, + * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ + +#ifndef __USBD_DFU_FLASH_H_ +#define __USBD_DFU_FLASH_H_ + +/* Includes ------------------------------------------------------------------*/ +#include "usbd_dfu.h" + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/* Exported macro ------------------------------------------------------------*/ + +extern USBD_DFU_MediaTypeDef USBD_DFU_Flash_fops; + +/* Exported functions ------------------------------------------------------- */ + +#endif /* __USBD_DFU_FLASH_H_ */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/usb/dfu/src/usbd_conf.c b/src/usb/dfu/src/usbd_conf.c new file mode 100755 index 0000000..8d4cde1 --- /dev/null +++ b/src/usb/dfu/src/usbd_conf.c @@ -0,0 +1,494 @@ +#if 0 +/** + ****************************************************************************** + * @file usbd_conf.c + * @author MCD Application Team + * @version V1.5.0 + * @date 04-March-2016 + * @brief This file implements the USB Device library callbacks and MSP + ****************************************************************************** + * @attention + * + *

© Copyright � 2016 STMicroelectronics International N.V. + * All rights reserved.

+ * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted, provided that the following conditions are met: + * + * 1. Redistribution of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of other + * contributors to this software may be used to endorse or promote products + * derived from this software without specific written permission. + * 4. This software, including modifications and/or derivative works of this + * software, must execute solely and exclusively on microcontroller or + * microprocessor devices manufactured by or for STMicroelectronics. + * 5. Redistribution and use of this software other than as permitted under + * this license is void and will automatically terminate your rights under + * this license. + * + * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A + * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY + * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT + * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, + * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, + * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx.h" +#include "stm32l1xx_hal.h" +#include "usbd_def.h" +#include "usbd_core.h" +#include "usbd_dfu.h" + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +PCD_HandleTypeDef hpcd; +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/******************************************************************************* + PCD BSP Routines +*******************************************************************************/ + +/** + * @brief Initializes the PCD MSP. + * @param hpcd: PCD handle + * @retval None + */ +void HAL_PCD_MspInit(PCD_HandleTypeDef *hpcd) +{ + GPIO_InitTypeDef GPIO_InitStruct; + + /* Enable the GPIOA clock */ + __HAL_RCC_GPIOA_CLK_ENABLE(); + + /* Configure USB DM/DP pin. This is optional, and maintained only for user guidance. + For the STM32L products there is no need to configure the PA12/PA11 pins couple + as Alternate Function */ + GPIO_InitStruct.Pin = (GPIO_PIN_11 | GPIO_PIN_12); + GPIO_InitStruct.Mode = GPIO_MODE_INPUT; + GPIO_InitStruct.Pull = GPIO_PULLUP; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + /* Enable USB Clock */ + __HAL_RCC_USB_CLK_ENABLE(); + + /* Enable SYSCFG Clock */ + __HAL_RCC_SYSCFG_CLK_ENABLE(); + + /* Set USB FS Interrupt priority */ + HAL_NVIC_SetPriority(USB_LP_IRQn, 5, 0); + + /* Enable USB Interrupt */ + HAL_NVIC_EnableIRQ(USB_LP_IRQn); +} + +/** + * @brief De-Initializes the PCD MSP. + * @param hpcd: PCD handle + * @retval None + */ +void HAL_PCD_MspDeInit(PCD_HandleTypeDef *hpcd) +{ + /* Disable USB FS Clock */ + __HAL_RCC_USB_CLK_DISABLE(); + + /* Disable SYSCFG Clock */ + __HAL_RCC_SYSCFG_CLK_DISABLE(); +} + +/******************************************************************************* + LL Driver Callbacks (PCD -> USB Device Library) +*******************************************************************************/ + +/** + * @brief SetupStage callback. + * @param hpcd: PCD handle + * @retval None + */ +void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd) +{ + USBD_LL_SetupStage(hpcd->pData, (uint8_t *)hpcd->Setup); +} + +/** + * @brief DataOut Stage callback. + * @param hpcd: PCD handle + * @param epnum: Endpoint Number + * @retval None + */ +void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) +{ + USBD_LL_DataOutStage(hpcd->pData, epnum, hpcd->OUT_ep[epnum].xfer_buff); +} + +/** + * @brief DataIn Stage callback. + * @param hpcd: PCD handle + * @param epnum: Endpoint Number + * @retval None + */ +void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) +{ + USBD_LL_DataInStage(hpcd->pData, epnum, hpcd->IN_ep[epnum].xfer_buff); +} + +/** + * @brief SOF callback. + * @param hpcd: PCD handle + * @retval None + */ +void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd) +{ + USBD_LL_SOF(hpcd->pData); +} + +/** + * @brief Reset callback. + * @param hpcd: PCD handle + * @retval None + */ +void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd) +{ + USBD_LL_SetSpeed(hpcd->pData, USBD_SPEED_FULL); + /* Reset Device */ + USBD_LL_Reset(hpcd->pData); +} + +/** + * @brief Suspend callback. + * @param hpcd: PCD handle + * @retval None + */ +void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd) +{ +} + +/** + * @brief Resume callback. + * @param hpcd: PCD handle + * @retval None + */ +void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd) +{ +} + +/** + * @brief ISOOUTIncomplete callback. + * @param hpcd: PCD handle + * @param epnum: Endpoint Number + * @retval None + */ +void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) +{ + USBD_LL_IsoOUTIncomplete(hpcd->pData, epnum); +} + +/** + * @brief ISOINIncomplete callback. + * @param hpcd: PCD handle + * @param epnum: Endpoint Number + * @retval None + */ +void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) +{ + USBD_LL_IsoINIncomplete(hpcd->pData, epnum); +} + +/** + * @brief ConnectCallback callback. + * @param hpcd: PCD handle + * @retval None + */ +void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd) +{ + USBD_LL_DevConnected(hpcd->pData); +} + +/** + * @brief Disconnect callback. + * @param hpcd: PCD handle + * @retval None + */ +void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd) +{ + USBD_LL_DevDisconnected(hpcd->pData); +} + +/******************************************************************************* + LL Driver Interface (USB Device Library --> PCD) +*******************************************************************************/ + +/** + * @brief Initializes the Low Level portion of the Device driver. + * @param pdev: Device handle + * @retval USBD Status + */ +USBD_StatusTypeDef USBD_LL_Init(USBD_HandleTypeDef *pdev) +{ + /* Set LL Driver parameters */ + hpcd.Instance = USB; + hpcd.Init.dev_endpoints = 8; + hpcd.Init.ep0_mps = PCD_EP0MPS_64; + hpcd.Init.phy_itface = PCD_PHY_EMBEDDED; + hpcd.Init.speed = PCD_SPEED_FULL; + hpcd.Init.low_power_enable = 0; + /* Link The driver to the stack */ + hpcd.pData = pdev; + pdev->pData = &hpcd; + /* Initialize LL Driver */ + HAL_PCD_Init(pdev->pData); + + HAL_PCDEx_PMAConfig(pdev->pData , 0x00 , PCD_SNG_BUF, 0x18); + HAL_PCDEx_PMAConfig(pdev->pData , 0x80 , PCD_SNG_BUF, 0x58); + + return USBD_OK; +} + +/** + * @brief De-Initializes the Low Level portion of the Device driver. + * @param pdev: Device handle + * @retval USBD Status + */ +USBD_StatusTypeDef USBD_LL_DeInit(USBD_HandleTypeDef *pdev) +{ + HAL_PCD_DeInit(pdev->pData); + return USBD_OK; +} + +/** + * @brief Starts the Low Level portion of the Device driver. + * @param pdev: Device handle + * @retval USBD Status + */ +USBD_StatusTypeDef USBD_LL_Start(USBD_HandleTypeDef *pdev) +{ + HAL_PCD_Start(pdev->pData); + return USBD_OK; +} + +/** + * @brief Stops the Low Level portion of the Device driver. + * @param pdev: Device handle + * @retval USBD Status + */ +USBD_StatusTypeDef USBD_LL_Stop(USBD_HandleTypeDef *pdev) +{ + HAL_PCD_Stop(pdev->pData); + return USBD_OK; +} + +/** + * @brief Opens an endpoint of the Low Level Driver. + * @param pdev: Device handle + * @param ep_addr: Endpoint Number + * @param ep_type: Endpoint Type + * @param ep_mps: Endpoint Max Packet Size + * @retval USBD Status + */ +USBD_StatusTypeDef USBD_LL_OpenEP(USBD_HandleTypeDef *pdev, + uint8_t ep_addr, + uint8_t ep_type, + uint16_t ep_mps) +{ + HAL_PCD_EP_Open(pdev->pData, + ep_addr, + ep_mps, + ep_type); + + return USBD_OK; +} + +/** + * @brief Closes an endpoint of the Low Level Driver. + * @param pdev: Device handle + * @param ep_addr: Endpoint Number + * @retval USBD Status + */ +USBD_StatusTypeDef USBD_LL_CloseEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr) +{ + HAL_PCD_EP_Close(pdev->pData, ep_addr); + return USBD_OK; +} + +/** + * @brief Flushes an endpoint of the Low Level Driver. + * @param pdev: Device handle + * @param ep_addr: Endpoint Number + * @retval USBD Status + */ +USBD_StatusTypeDef USBD_LL_FlushEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr) +{ + HAL_PCD_EP_Flush(pdev->pData, ep_addr); + return USBD_OK; +} + +/** + * @brief Sets a Stall condition on an endpoint of the Low Level Driver. + * @param pdev: Device handle + * @param ep_addr: Endpoint Number + * @retval USBD Status + */ +USBD_StatusTypeDef USBD_LL_StallEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr) +{ + HAL_PCD_EP_SetStall(pdev->pData, ep_addr); + return USBD_OK; +} + +/** + * @brief Clears a Stall condition on an endpoint of the Low Level Driver. + * @param pdev: Device handle + * @param ep_addr: Endpoint Number + * @retval USBD Status + */ +USBD_StatusTypeDef USBD_LL_ClearStallEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr) +{ + HAL_PCD_EP_ClrStall(pdev->pData, ep_addr); + return USBD_OK; +} + +/** + * @brief Returns Stall condition. + * @param pdev: Device handle + * @param ep_addr: Endpoint Number + * @retval Stall (1: Yes, 0: No) + */ +uint8_t USBD_LL_IsStallEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr) +{ + PCD_HandleTypeDef *hpcd = pdev->pData; + + if ((ep_addr & 0x80) == 0x80) + { + return hpcd->IN_ep[ep_addr & 0x7F].is_stall; + } + else + { + return hpcd->OUT_ep[ep_addr & 0x7F].is_stall; + } +} + +/** + * @brief Assigns a USB address to the device. + * @param pdev: Device handle + * @param ep_addr: Endpoint Number + * @retval USBD Status + */ +USBD_StatusTypeDef USBD_LL_SetUSBAddress(USBD_HandleTypeDef *pdev, uint8_t dev_addr) +{ + HAL_PCD_SetAddress(pdev->pData, dev_addr); + return USBD_OK; +} + +/** + * @brief Transmits data over an endpoint. + * @param pdev: Device handle + * @param ep_addr: Endpoint Number + * @param pbuf: Pointer to data to be sent + * @param size: Data size + * @retval USBD Status + */ +USBD_StatusTypeDef USBD_LL_Transmit(USBD_HandleTypeDef *pdev, + uint8_t ep_addr, + uint8_t *pbuf, + uint16_t size) +{ + HAL_PCD_EP_Transmit(pdev->pData, ep_addr, pbuf, size); + return USBD_OK; +} + +/** + * @brief Prepares an endpoint for reception. + * @param pdev: Device handle + * @param ep_addr: Endpoint Number + * @param pbuf: Pointer to data to be received + * @param size: Data size + * @retval USBD Status + */ +USBD_StatusTypeDef USBD_LL_PrepareReceive(USBD_HandleTypeDef *pdev, + uint8_t ep_addr, + uint8_t *pbuf, + uint16_t size) +{ + HAL_PCD_EP_Receive(pdev->pData, ep_addr, pbuf, size); + return USBD_OK; +} + +/** + * @brief Returns the last transfered packet size. + * @param pdev: Device handle + * @param ep_addr: Endpoint Number + * @retval Recived Data Size + */ +uint32_t USBD_LL_GetRxDataSize(USBD_HandleTypeDef *pdev, uint8_t ep_addr) +{ + return HAL_PCD_EP_GetRxCount(pdev->pData, ep_addr); +} + +/** + * @brief Delays routine for the USB Device Library. + * @param Delay: Delay in ms + * @retval None + */ +void USBD_LL_Delay(uint32_t Delay) +{ + HAL_Delay(Delay); +} + +/** + * @brief static single allocation. + * @param size: size of allocated memory + * @retval None + */ +void *USBD_static_malloc(uint32_t size) +{ + static uint32_t mem[MAX_STATIC_ALLOC_SIZE]; + return mem; +} + +/** + * @brief Dummy memory free + * @param *p pointer to allocated memory address + * @retval None + */ +void USBD_static_free(void *p) +{ +} + +/** + * @brief Software Device Connection + * @param hpcd: PCD handle + * @param state: connection state (0 : disconnected / 1: connected) + * @retval None + */ +void HAL_PCDEx_SetConnectionState(PCD_HandleTypeDef *hpcd, uint8_t state) +{ + if (state == 1) + { + /* DP Pull-Down is Internal */ + __HAL_SYSCFG_USBPULLUP_ENABLE(); + } + else + { + /* DP Pull-Down is Internal */ + __HAL_SYSCFG_USBPULLUP_DISABLE(); + } +} + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ +#endif \ No newline at end of file diff --git a/src/usb/dfu/src/usbd_desc.c b/src/usb/dfu/src/usbd_desc.c new file mode 100755 index 0000000..d1c07b2 --- /dev/null +++ b/src/usb/dfu/src/usbd_desc.c @@ -0,0 +1,266 @@ +#if 0 +/** + ****************************************************************************** + * @file USB_Device/DFU_Standalone/Src/usbd_desc.c + * @author MCD Application Team + * @version V1.5.0 + * @date 04-March-2016 + * @brief This file provides the USBD descriptors and string formating method. + ****************************************************************************** + * @attention + * + *

© Copyright � 2016 STMicroelectronics International N.V. + * All rights reserved.

+ * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted, provided that the following conditions are met: + * + * 1. Redistribution of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of other + * contributors to this software may be used to endorse or promote products + * derived from this software without specific written permission. + * 4. This software, including modifications and/or derivative works of this + * software, must execute solely and exclusively on microcontroller or + * microprocessor devices manufactured by or for STMicroelectronics. + * 5. Redistribution and use of this software other than as permitted under + * this license is void and will automatically terminate your rights under + * this license. + * + * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A + * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY + * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT + * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, + * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, + * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "usbd_core.h" +#include "usbd_desc.h" +#include "usbd_conf.h" + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +#define USBD_VID 0x0483 +#define USBD_PID 0xDF11 +#define USBD_LANGID_STRING 0x409 +#define USBD_MANUFACTURER_STRING "STMicroelectronics" +#define USBD_PRODUCT_FS_STRING "DFU in FS Mode" +#define USBD_CONFIGURATION_FS_STRING "DFU Config" +#define USBD_INTERFACE_FS_STRING "DFU Interface" + +/* Private macro -------------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +uint8_t *USBD_DFU_DeviceDescriptor(USBD_SpeedTypeDef speed, uint16_t *length); +uint8_t *USBD_DFU_LangIDStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length); +uint8_t *USBD_DFU_ManufacturerStrDescriptor (USBD_SpeedTypeDef speed, uint16_t *length); +uint8_t *USBD_DFU_ProductStrDescriptor (USBD_SpeedTypeDef speed, uint16_t *length); +uint8_t *USBD_DFU_SerialStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length); +uint8_t *USBD_DFU_ConfigStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length); +uint8_t *USBD_DFU_InterfaceStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length); +#ifdef USB_SUPPORT_USER_STRING_DESC +uint8_t *USBD_DFU_USRStringDesc (USBD_SpeedTypeDef speed, uint8_t idx, uint16_t *length); +#endif /* USB_SUPPORT_USER_STRING_DESC */ + +/* Private variables ---------------------------------------------------------*/ +USBD_DescriptorsTypeDef DFU_Desc = { + USBD_DFU_DeviceDescriptor, + USBD_DFU_LangIDStrDescriptor, + USBD_DFU_ManufacturerStrDescriptor, + USBD_DFU_ProductStrDescriptor, + USBD_DFU_SerialStrDescriptor, + USBD_DFU_ConfigStrDescriptor, + USBD_DFU_InterfaceStrDescriptor, +}; + +/* USB Standard Device Descriptor */ +const uint8_t hUSBDDeviceDesc[USB_LEN_DEV_DESC]= { + 0x12, /* bLength */ + USB_DESC_TYPE_DEVICE, /* bDescriptorType */ + 0x00, /* bcdUSB */ + 0x02, + 0x00, /* bDeviceClass */ + 0x00, /* bDeviceSubClass */ + 0x00, /* bDeviceProtocol */ + USB_MAX_EP0_SIZE, /* bMaxPacketSize */ + LOBYTE(USBD_VID), /* idVendor */ + HIBYTE(USBD_VID), /* idVendor */ + LOBYTE(USBD_PID), /* idVendor */ + HIBYTE(USBD_PID), /* idVendor */ + 0x00, /* bcdDevice rel. 2.00 */ + 0x02, + USBD_IDX_MFC_STR, /* Index of manufacturer string */ + USBD_IDX_PRODUCT_STR, /* Index of product string */ + USBD_IDX_SERIAL_STR, /* Index of serial number string */ + USBD_MAX_NUM_CONFIGURATION /* bNumConfigurations */ +}; /* USB_DeviceDescriptor */ + +const uint8_t USBD_LangIDDesc[USB_LEN_LANGID_STR_DESC]= { + USB_LEN_LANGID_STR_DESC, + USB_DESC_TYPE_STRING, + LOBYTE(USBD_LANGID_STRING), + HIBYTE(USBD_LANGID_STRING), +}; + +uint8_t USBD_StringSerial[USB_SIZ_STRING_SERIAL] = +{ + USB_SIZ_STRING_SERIAL, + USB_DESC_TYPE_STRING, +}; + +uint8_t USBD_StrDesc[USBD_MAX_STR_DESC_SIZ]; + +/* Private functions ---------------------------------------------------------*/ +static void IntToUnicode (uint32_t value , uint8_t *pbuf , uint8_t len); +static void Get_SerialNum(void); +/** + * @brief Returns the device descriptor. + * @param speed: Current device speed + * @param length: Pointer to data length variable + * @retval Pointer to descriptor buffer + */ +uint8_t *USBD_DFU_DeviceDescriptor(USBD_SpeedTypeDef speed, uint16_t *length) +{ + *length = sizeof(hUSBDDeviceDesc); + return (uint8_t*)hUSBDDeviceDesc; +} + +/** + * @brief Returns the LangID string descriptor. + * @param speed: Current device speed + * @param length: Pointer to data length variable + * @retval Pointer to descriptor buffer + */ +uint8_t *USBD_DFU_LangIDStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length) +{ + *length = sizeof(USBD_LangIDDesc); + return (uint8_t*)USBD_LangIDDesc; +} + +/** + * @brief Returns the product string descriptor. + * @param speed: Current device speed + * @param length: Pointer to data length variable + * @retval Pointer to descriptor buffer + */ +uint8_t *USBD_DFU_ProductStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length) +{ + USBD_GetString((uint8_t *)USBD_PRODUCT_FS_STRING, USBD_StrDesc, length); + return USBD_StrDesc; +} + +/** + * @brief Returns the manufacturer string descriptor. + * @param speed: Current device speed + * @param length: Pointer to data length variable + * @retval Pointer to descriptor buffer + */ +uint8_t *USBD_DFU_ManufacturerStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length) +{ + USBD_GetString((uint8_t *) USBD_MANUFACTURER_STRING, USBD_StrDesc, length); + return USBD_StrDesc; +} + +/** + * @brief Returns the serial number string descriptor. + * @param speed: Current device speed + * @param length: Pointer to data length variable + * @retval Pointer to descriptor buffer + */ +uint8_t *USBD_DFU_SerialStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length) +{ + *length = USB_SIZ_STRING_SERIAL; + + /* Update the serial number string descriptor with the data from the unique ID*/ + Get_SerialNum(); + + return USBD_StringSerial; +} + +/** + * @brief Returns the configuration string descriptor. + * @param speed: Current device speed + * @param length: Pointer to data length variable + * @retval Pointer to descriptor buffer + */ +uint8_t *USBD_DFU_ConfigStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length) +{ + USBD_GetString((uint8_t *)USBD_CONFIGURATION_FS_STRING, USBD_StrDesc, length); + return USBD_StrDesc; +} + +/** + * @brief Returns the interface string descriptor. + * @param speed: Current device speed + * @param length: Pointer to data length variable + * @retval Pointer to descriptor buffer + */ +uint8_t *USBD_DFU_InterfaceStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length) +{ + USBD_GetString((uint8_t *)USBD_INTERFACE_FS_STRING, USBD_StrDesc, length); + return USBD_StrDesc; +} + +/** + * @brief Create the serial number string descriptor + * @param None + * @retval None + */ +static void Get_SerialNum(void) +{ + uint32_t deviceserial0, deviceserial1, deviceserial2; + + deviceserial0 = *(uint32_t*)DEVICE_ID1; + deviceserial1 = *(uint32_t*)DEVICE_ID2; + deviceserial2 = *(uint32_t*)DEVICE_ID3; + + deviceserial0 += deviceserial2; + + if (deviceserial0 != 0) + { + IntToUnicode (deviceserial0, &USBD_StringSerial[2] ,8); + IntToUnicode (deviceserial1, &USBD_StringSerial[18] ,4); + } +} +/** + * @brief Convert Hex 32Bits value into char + * @param value: value to convert + * @param pbuf: pointer to the buffer + * @param len: buffer length + * @retval None + */ +static void IntToUnicode (uint32_t value , uint8_t *pbuf , uint8_t len) +{ + uint8_t idx = 0; + + for( idx = 0 ; idx < len ; idx ++) + { + if( ((value >> 28)) < 0xA ) + { + pbuf[ 2* idx] = (value >> 28) + '0'; + } + else + { + pbuf[2* idx] = (value >> 28) + 'A' - 10; + } + + value = value << 4; + + pbuf[ 2* idx + 1] = 0; + } +} + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ +#endif \ No newline at end of file diff --git a/src/usb/dfu/src/usbd_dfu_flash.c b/src/usb/dfu/src/usbd_dfu_flash.c new file mode 100755 index 0000000..e03be3a --- /dev/null +++ b/src/usb/dfu/src/usbd_dfu_flash.c @@ -0,0 +1,212 @@ +/** + ****************************************************************************** + * @file USB_Device/DFU_Standalone/Src/usbd_dfu_flash.c + * @author MCD Application Team + * @version V1.5.0 + * @date 04-March-2016 + * @brief Memory management layer + ****************************************************************************** + * @attention + * + *

© Copyright © 2016 STMicroelectronics International N.V. + * All rights reserved.

+ * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted, provided that the following conditions are met: + * + * 1. Redistribution of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of other + * contributors to this software may be used to endorse or promote products + * derived from this software without specific written permission. + * 4. This software, including modifications and/or derivative works of this + * software, must execute solely and exclusively on microcontroller or + * microprocessor devices manufactured by or for STMicroelectronics. + * 5. Redistribution and use of this software other than as permitted under + * this license is void and will automatically terminate your rights under + * this license. + * + * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A + * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY + * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT + * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, + * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, + * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "usbd_dfu_flash.h" +#include "stm32l1xx_hal.h" + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +#define FLASH_DESC_STR "@Internal Flash /0x08000000/48*256 a,464*256 g" +///*128 pages of 2 Kbytes*/ +//#define FLASH_DESC_STR "@Internal Flash /0x08000000/12*01Ka,84*01Kg" +#define FLASH_ERASE_TIME (uint16_t)50 +#define FLASH_PROGRAM_TIME (uint16_t)50 + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Extern function prototypes ------------------------------------------------*/ +uint16_t Flash_If_Init(void); +uint16_t Flash_If_Erase(uint32_t Add); +uint16_t Flash_If_Write(uint8_t *src, uint8_t *dest, uint32_t Len); +uint8_t *Flash_If_Read(uint8_t *src, uint8_t *dest, uint32_t Len); +uint16_t Flash_If_DeInit(void); +uint16_t Flash_If_GetStatus(uint32_t Add, uint8_t Cmd, uint8_t *buffer); + +USBD_DFU_MediaTypeDef USBD_DFU_Flash_fops= { + (uint8_t *)FLASH_DESC_STR, + Flash_If_Init, + Flash_If_DeInit, + Flash_If_Erase, + Flash_If_Write, + Flash_If_Read, + Flash_If_GetStatus, +}; + +/* Private functions ---------------------------------------------------------*/ +/** + * @brief Initializes Memory. + * @param None + * @retval 0 if operation is successeful, MAL_FAIL else. + */ +uint16_t Flash_If_Init(void) +{ + /* Unlock the internal flash */ + HAL_FLASH_Unlock(); + return 0; +} + +/** + * @brief De-Initializes Memory. + * @param None + * @retval 0 if operation is successeful, MAL_FAIL else. + */ +uint16_t Flash_If_DeInit(void) +{ + /* Lock the internal flash */ + HAL_FLASH_Lock(); + return 0; +} + +/** + * @brief Erases sector. + * @param Add: Address of sector to be erased. + * @retval 0 if operation is successeful, MAL_FAIL else. + */ +uint16_t Flash_If_Erase(uint32_t Add) +{ + uint32_t NbOfPages = 0; + uint32_t PageError = 0; + /* Variable contains Flash operation status */ + HAL_StatusTypeDef status; + FLASH_EraseInitTypeDef eraseinitstruct; + + /* Get the number of sector to erase from 1st sector*/ + NbOfPages = (USBD_DFU_APP_END_ADD - USBD_DFU_APP_DEFAULT_ADD) / FLASH_PAGE_SIZE; + eraseinitstruct.TypeErase = FLASH_TYPEERASE_PAGES; + eraseinitstruct.PageAddress = USBD_DFU_APP_DEFAULT_ADD; + eraseinitstruct.NbPages = NbOfPages; + status = HAL_FLASHEx_Erase(&eraseinitstruct, &PageError); + + if (status != HAL_OK) + { + return 1; + } + return 0; +} + +/** + * @brief Writes Data into Memory. + * @param src: Pointer to the source buffer. Address to be written to. + * @param dest: Pointer to the destination buffer. + * @param Len: Number of data to be written (in bytes). + * @retval 0 if operation is successeful, MAL_FAIL else. + */ +uint16_t Flash_If_Write(uint8_t *src, uint8_t *dest, uint32_t Len) +{ + uint32_t i = 0; + + for(i = 0; i < Len; i+=4) + { + /* Device voltage range supposed to be [2.7V to 3.6V], the operation will + be done by byte */ + if(HAL_FLASH_Program(FLASH_TYPEPROGRAM_WORD, (uint32_t)(dest+i), *(uint32_t*)(src+i)) == HAL_OK) + { + /* Check the written value */ + if(*(uint32_t *)(src + i) != *(uint32_t*)(dest+i)) + { + /* Flash content doesn't match SRAM content */ + return 2; + } + } + else + { + /* Error occurred while writing data in Flash memory */ + return 1; + } + } + return 0; +} + +/** + * @brief Reads Data into Memory. + * @param src: Pointer to the source buffer. Address to be written to. + * @param dest: Pointer to the destination buffer. + * @param Len: Number of data to be read (in bytes). + * @retval Pointer to the physical address where data should be read. + */ +uint8_t *Flash_If_Read(uint8_t *src, uint8_t *dest, uint32_t Len) +{ + uint32_t i = 0; + uint8_t *psrc = src; + + for(i = 0; i < Len; i++) + { + dest[i] = *psrc++; + } + /* Return a valid address to avoid HardFault */ + return (uint8_t*)(dest); +} + +/** + * @brief Gets Memory Status. + * @param Add: Address to be read from. + * @param Cmd: Number of data to be read (in bytes). + * @retval 0 if operation is successeful + */ +uint16_t Flash_If_GetStatus(uint32_t Add, uint8_t Cmd, uint8_t *buffer) +{ + switch(Cmd) + { + case DFU_MEDIA_PROGRAM: + buffer[1] = (uint8_t)FLASH_PROGRAM_TIME; + buffer[2] = (uint8_t)(FLASH_PROGRAM_TIME << 8); + buffer[3] = 0; + break; + + case DFU_MEDIA_ERASE: + default: + buffer[1] = (uint8_t)FLASH_ERASE_TIME; + buffer[2] = (uint8_t)(FLASH_ERASE_TIME << 8); + buffer[3] = 0; + break; + } + return 0; +} + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm32flash_src/AUTHORS b/stm32flash_src/AUTHORS new file mode 100644 index 0000000..7894bb9 --- /dev/null +++ b/stm32flash_src/AUTHORS @@ -0,0 +1,27 @@ +Authors ordered by first contribution. + +Geoffrey McRae +Bret Olmsted +Tormod Volden +Jakob Malm +Reuben Dowle +Matthias Kubisch +Paul Fertser +Daniel Strnad +JĂ©rĂ©mie Rapin +Christian Pointner +Mats Erik Andersson +Alexey Borovik +Antonio Borneo +Armin van der Togt +Brian Silverman +Georg Hofmann +Luis Rodrigues +Jeff Epler +Alexander O. Anisimov +Seth LaForge +Johan Hellman +Matthias Weisser +Tilman Sauerbeck +Mateusz SpychaÅ‚a +Ernst Schwab diff --git a/stm32flash_src/Android.mk b/stm32flash_src/Android.mk new file mode 100644 index 0000000..7be3d00 --- /dev/null +++ b/stm32flash_src/Android.mk @@ -0,0 +1,20 @@ +TOP_LOCAL_PATH := $(call my-dir) + +include $(call all-named-subdir-makefiles, parsers) + +LOCAL_PATH := $(TOP_LOCAL_PATH) + +include $(CLEAR_VARS) +LOCAL_MODULE := stm32flash +LOCAL_SRC_FILES := \ + dev_table.c \ + i2c.c \ + init.c \ + main.c \ + port.c \ + serial_common.c \ + serial_platform.c \ + stm32.c \ + utils.c +LOCAL_STATIC_LIBRARIES := libparsers +include $(BUILD_EXECUTABLE) diff --git a/stm32flash_src/HOWTO b/stm32flash_src/HOWTO new file mode 100644 index 0000000..d8f32eb --- /dev/null +++ b/stm32flash_src/HOWTO @@ -0,0 +1,35 @@ +Add new interfaces: +===================================================================== +Current version 0.4 supports the following interfaces: +- UART Windows (either "COMn" and "\\.\COMn"); +- UART posix/Linux (e.g. "/dev/ttyUSB0"); +- I2C Linux through standard driver "i2c-dev" (e.g. "/dev/i2c-n"). + +Starting from version 0.4, the back-end of stm32flash is modular and +ready to be expanded to support new interfaces. +I'm planning adding SPI on Linux through standard driver "spidev". +You are invited to contribute with more interfaces. + +To add a new interface you need to add a new file, populate the struct +port_interface (check at the end of files i2c.c, serial_posix.c and +serial_w32.c) and provide the relative functions to operate on the +interface: open/close, read/write, get_cfg_str and the optional gpio. +The include the new drive in Makefile and register the new struct +port_interface in file port.c in struct port_interface *ports[]. + +There are several USB-I2C adapter in the market, each providing its +own libraries to communicate with the I2C bus. +Could be interesting to provide as back-end a bridge between stm32flash +and such libraries (I have no plan on this item). + + +Add new STM32 devices: +===================================================================== +Add a new line in file dev_table.c, in table devices[]. +The fields of the table are listed in stm32.h, struct stm32_dev. + + +Cross compile on Linux host for Windows target with MinGW: +===================================================================== +I'm using a 64 bit Arch Linux machines, and I usually run: + make CC=x86_64-w64-mingw32-gcc AR=x86_64-w64-mingw32-ar diff --git a/stm32flash_src/I2C.txt b/stm32flash_src/I2C.txt new file mode 100644 index 0000000..4c05ff6 --- /dev/null +++ b/stm32flash_src/I2C.txt @@ -0,0 +1,94 @@ +About I2C back-end communication in stm32flash +========================================================================== + +Starting from version v0.4, beside the serial communication port, +stm32flash adds support for I2C port to talk with STM32 bootloader. + +The current I2C back-end supports only the API provided by Linux kernel +driver "i2c-dev", so only I2C controllers with Linux kernel driver can be +used. +In Linux source code, most of the drivers for I2C and SMBUS controllers +are in + ./drivers/i2c/busses/ +Only I2C is supported by STM32 bootloader, so check the section below +about SMBUS. +No I2C support for Windows is available in stm32flash v0.4. + +Thanks to the new modular back-end, stm32flash can be easily extended to +support new back-ends and API. Check HOWTO file in stm32flash source code +for details. + +In the market there are several USB-to-I2C dongles; most of them are not +supported by kernel drivers. Manufacturer provide proprietary userspace +libraries using not standardized API. +These API and dongles could be supported in feature versions. + +There are currently 3 versions of STM32 bootloader for I2C communications: +- v1.0 using I2C clock stretching synchronization between host and STM32; +- v1.1 superset of v1.0, adds non stretching commands; +- v1.2 superset of v1.1, adds CRC command and compatibility with i2cdetect. +Details in ST application note AN2606. +All the bootloaders above are tested and working with stm32flash. + + +SMBUS controllers +========================================================================== + +Almost 50% of the drivers in Linux source code folder + ./drivers/i2c/busses/ +are for controllers that "only" support SMBUS protocol. They can NOT +operate with STM32 bootloader. +To identify if your controller supports I2C, use command: + i2cdetect -F n +where "n" is the number of the I2C interface (e.g. n=3 for "/dev/i2c-3"). +Controllers that supports I2C will report + I2C yes +Controller that support both I2C and SMBUS are ok. + +If you are interested on details about SMBUS protocol, you can download +the current specs from + http://smbus.org/specs/smbus20.pdf +and you can read the files in Linux source code + ./Documentation/i2c/i2c-protocol + ./Documentation/i2c/smbus-protocol + + +About bootloader v1.0 +========================================================================== + +Version v1.0 can have issues with some I2C controllers due to use of clock +stretching during commands that require long operations, like flash erase +and programming. + +Clock stretching is a technique to synchronize host and I2C device. When +I2C device wants to force a delay in the communication, it push "low" the +I2C clock; the I2C controller detects it and waits until I2C clock returns +"high". +Most I2C controllers set a "timeout" for clock stretching, ranging from +few milli-seconds to seconds depending on specific HW or SW driver. + +It is possible that the timeout in your I2C controller is smaller than the +delay required for flash erase or programming. In this case the I2C +controller will timeout and report error to stm32flash. +There is no possibility for stm32flash to retry, so it can only signal the +error and exit. + +To by-pass the issue with bootloader v1.0 you can modify the kernel driver +of your I2C controller. Not an easy job, since every controller has its own +way to handle the timeout. + +In my case I'm using the I2C controller integrated in the VGA port of my +laptop HP EliteBook 8460p. I built the 0.25$ VGA-to-I2C adapter reported in + http://www.paintyourdragon.com/?p=43 +To change the timeout of the I2C controller I had to modify the kernel file + drivers/gpu/drm/radeon/radeon_i2c.c +line 969 +- i2c->bit.timeout = usecs_to_jiffies(2200); /* from VESA */ ++ i2c->bit.timeout = msecs_to_jiffies(5000); /* 5s for STM32 */ +and recompile it. +Then + $> modprobe i2c-dev + $> chmod 666 /dev/i2c-7 + #> stm32flash -a 0x39 /dev/i2c-7 + +2014-09-16 Antonio Borneo diff --git a/stm32flash_src/INSTALL b/stm32flash_src/INSTALL new file mode 100644 index 0000000..16dcc41 --- /dev/null +++ b/stm32flash_src/INSTALL @@ -0,0 +1,16 @@ + +Building stm32flash + +A set of static makefiles is provided that should work on most operating +systems with a standard build environment, for instance GNU make and gcc. + +1. Build executable + + make + +2. Install executable and manual page (optional) + + make install + + The install location base can be set with the PREFIX flag (default + is /usr/local), e.g. make install PREFIX=/opt diff --git a/stm32flash_src/Makefile b/stm32flash_src/Makefile new file mode 100644 index 0000000..a6c33b9 --- /dev/null +++ b/stm32flash_src/Makefile @@ -0,0 +1,40 @@ +PREFIX = /usr/local +CFLAGS += -Wall -Werror -g + +INSTALL = install + +OBJS = dev_table.o \ + i2c.o \ + init.o \ + main.o \ + port.o \ + serial_common.o \ + serial_platform.o \ + stm32.o \ + utils.o + +LIBOBJS = parsers/parsers.a + +all: stm32flash + +serial_platform.o: serial_posix.c serial_w32.c + +parsers/parsers.a: force + cd parsers && $(MAKE) parsers.a + +stm32flash: $(OBJS) $(LIBOBJS) + $(CC) $(LDFLAGS) -o $@ $(OBJS) $(LIBOBJS) + +clean: + rm -f $(OBJS) stm32flash + cd parsers && $(MAKE) $@ + +install: all + $(INSTALL) -d $(DESTDIR)$(PREFIX)/bin + $(INSTALL) -m 755 stm32flash $(DESTDIR)$(PREFIX)/bin + $(INSTALL) -d $(DESTDIR)$(PREFIX)/share/man/man1 + $(INSTALL) -m 644 stm32flash.1 $(DESTDIR)$(PREFIX)/share/man/man1 + +force: + +.PHONY: all clean install force diff --git a/stm32flash_src/README.md b/stm32flash_src/README.md new file mode 100644 index 0000000..97146d0 --- /dev/null +++ b/stm32flash_src/README.md @@ -0,0 +1,19 @@ +# stm32flash + +stm32flash (https://sourceforge.net/projects/stm32flash/) with some fixes, including: +* support for manually erasing more than 255 flash pages +* support for writing/reading EEPROM on STM32L0 and STM32L1 +* support for erasing necessary flash pages only with -E option + +From here, +https://github.com/unwireddevices/stm32flash + +I added the RAK811 STM32L device that I have in dev_table as it did not support page erase + +To program flash memory: +stm32flash -b 230400 -E -w file.hex COMxx + +To program EEPROM memory: +stm32flash -b 230400 -S 0x08080000 -w file.bin COMxx + +P.S. Default UART baud rate is 115200 bps. Speeds up to 921600 bps were tested with CP2102 based USB-UART adapter. Even higher 3000000 bps speed should be possible with FT232R, althought it is not guaranteed by AN3155 that speed over 115200 bps will work. diff --git a/stm32flash_src/TODO b/stm32flash_src/TODO new file mode 100644 index 0000000..09a1776 --- /dev/null +++ b/stm32flash_src/TODO @@ -0,0 +1,4 @@ + +AUTHORS: +- Add contributors from Geoffrey's commits + diff --git a/stm32flash_src/dev_table.c b/stm32flash_src/dev_table.c new file mode 100644 index 0000000..dacf4bb --- /dev/null +++ b/stm32flash_src/dev_table.c @@ -0,0 +1,110 @@ +/* + stm32flash - Open Source ST STM32 flash program for *nix + Copyright (C) 2010 Geoffrey McRae + Copyright (C) 2014-2015 Antonio Borneo + + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public License + as published by the Free Software Foundation; either version 2 + of the License, or (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. +*/ + +#include "stm32.h" + +#define SZ_128 0x00000080 +#define SZ_256 0x00000100 +#define SZ_1K 0x00000400 +#define SZ_2K 0x00000800 +#define SZ_16K 0x00004000 +#define SZ_32K 0x00008000 +#define SZ_64K 0x00010000 +#define SZ_128K 0x00020000 +#define SZ_256K 0x00040000 + +/* + * Page-size for page-by-page flash erase. + * Arrays are zero terminated; last non-zero value is automatically repeated + */ + +/* fixed size pages */ +static uint32_t p_128[] = { SZ_128, 0 }; +static uint32_t p_256[] = { SZ_256, 0 }; +static uint32_t p_1k[] = { SZ_1K, 0 }; +static uint32_t p_2k[] = { SZ_2K, 0 }; +/* F2 and F4 page size */ +static uint32_t f2f4[] = { SZ_16K, SZ_16K, SZ_16K, SZ_16K, SZ_64K, SZ_128K, 0 }; +/* F4 dual bank page size */ +static uint32_t f4db[] = { + SZ_16K, SZ_16K, SZ_16K, SZ_16K, SZ_64K, SZ_128K, SZ_128K, SZ_128K, + SZ_16K, SZ_16K, SZ_16K, SZ_16K, SZ_64K, SZ_128K, 0 +}; +/* F7 page size */ +static uint32_t f7[] = { SZ_32K, SZ_32K, SZ_32K, SZ_32K, SZ_128K, SZ_256K, 0 }; + +/* + * Device table, corresponds to the "Bootloader device-dependant parameters" + * table in ST document AN2606. + * Note that the option bytes upper range is inclusive! + */ +const stm32_dev_t devices[] = { + /* ID "name" SRAM-address-range FLASH-address-range PPS PSize Option-byte-addr-range System-mem-addr-range Flags */ + /* F0 */ + {0x440, "STM32F030x8/F05xxx" , 0x20000800, 0x20002000, 0x08000000, 0x08010000, 4, p_1k , 0x1FFFF800, 0x1FFFF80F, 0x1FFFEC00, 0x1FFFF800, 0, 0, 0}, + {0x442, "STM32F030xC/F09xxx" , 0x20001800, 0x20008000, 0x08000000, 0x08040000, 2, p_2k , 0x1FFFF800, 0x1FFFF80F, 0x1FFFC800, 0x1FFFF800, 0, 0, F_OBLL}, + {0x444, "STM32F03xx4/6" , 0x20000800, 0x20001000, 0x08000000, 0x08008000, 4, p_1k , 0x1FFFF800, 0x1FFFF80F, 0x1FFFEC00, 0x1FFFF800, 0, 0, 0}, + {0x445, "STM32F04xxx/F070x6" , 0x20001800, 0x20001800, 0x08000000, 0x08008000, 4, p_1k , 0x1FFFF800, 0x1FFFF80F, 0x1FFFC400, 0x1FFFF800, 0, 0, 0}, + {0x448, "STM32F070xB/F071xx/F72xx" , 0x20001800, 0x20004000, 0x08000000, 0x08020000, 2, p_2k , 0x1FFFF800, 0x1FFFF80F, 0x1FFFC800, 0x1FFFF800, 0, 0, 0}, + /* F1 */ + {0x412, "STM32F10xxx Low-density" , 0x20000200, 0x20002800, 0x08000000, 0x08008000, 4, p_1k , 0x1FFFF800, 0x1FFFF80F, 0x1FFFF000, 0x1FFFF800, 0, 0, 0}, + {0x410, "STM32F10xxx Medium-density" , 0x20000200, 0x20005000, 0x08000000, 0x08020000, 4, p_1k , 0x1FFFF800, 0x1FFFF80F, 0x1FFFF000, 0x1FFFF800, 0, 0, 0}, + {0x414, "STM32F10xxx High-density" , 0x20000200, 0x20010000, 0x08000000, 0x08080000, 2, p_2k , 0x1FFFF800, 0x1FFFF80F, 0x1FFFF000, 0x1FFFF800, 0, 0, 0}, + {0x420, "STM32F10xxx Medium-density VL" , 0x20000200, 0x20002000, 0x08000000, 0x08020000, 4, p_1k , 0x1FFFF800, 0x1FFFF80F, 0x1FFFF000, 0x1FFFF800, 0, 0, 0}, + {0x428, "STM32F10xxx High-density VL" , 0x20000200, 0x20008000, 0x08000000, 0x08080000, 2, p_2k , 0x1FFFF800, 0x1FFFF80F, 0x1FFFF000, 0x1FFFF800, 0, 0, 0}, + {0x418, "STM32F105xx/F107xx" , 0x20001000, 0x20010000, 0x08000000, 0x08040000, 2, p_2k , 0x1FFFF800, 0x1FFFF80F, 0x1FFFB000, 0x1FFFF800, 0, 0, 0}, + {0x430, "STM32F10xxx XL-density" , 0x20000800, 0x20018000, 0x08000000, 0x08100000, 2, p_2k , 0x1FFFF800, 0x1FFFF80F, 0x1FFFE000, 0x1FFFF800, 0, 0, 0}, + /* F2 */ + {0x411, "STM32F2xxxx" , 0x20002000, 0x20020000, 0x08000000, 0x08100000, 1, f2f4 , 0x1FFFC000, 0x1FFFC00F, 0x1FFF0000, 0x1FFF7800, 0, 0, 0}, + /* F3 */ + {0x432, "STM32F373xx/F378xx" , 0x20001400, 0x20008000, 0x08000000, 0x08040000, 2, p_2k , 0x1FFFF800, 0x1FFFF80F, 0x1FFFD800, 0x1FFFF800, 0, 0, 0}, + {0x422, "STM32F302xB(C)/F303xB(C)/F358xx" , 0x20001400, 0x2000A000, 0x08000000, 0x08040000, 2, p_2k , 0x1FFFF800, 0x1FFFF80F, 0x1FFFD800, 0x1FFFF800, 0, 0, 0}, + {0x439, "STM32F301xx/F302x4(6/8)/F318xx" , 0x20001800, 0x20004000, 0x08000000, 0x08010000, 2, p_2k , 0x1FFFF800, 0x1FFFF80F, 0x1FFFD800, 0x1FFFF800, 0, 0, 0}, + {0x438, "STM32F303x4(6/8)/F334xx/F328xx" , 0x20001800, 0x20003000, 0x08000000, 0x08010000, 2, p_2k , 0x1FFFF800, 0x1FFFF80F, 0x1FFFD800, 0x1FFFF800, 0, 0, 0}, + {0x446, "STM32F302xD(E)/F303xD(E)/F398xx" , 0x20001800, 0x20010000, 0x08000000, 0x08080000, 2, p_2k , 0x1FFFF800, 0x1FFFF80F, 0x1FFFD800, 0x1FFFF800, 0, 0, 0}, + /* F4 */ + {0x413, "STM32F40xxx/41xxx" , 0x20003000, 0x20020000, 0x08000000, 0x08100000, 1, f2f4 , 0x1FFFC000, 0x1FFFC00F, 0x1FFF0000, 0x1FFF7800, 0, 0, 0}, + {0x419, "STM32F42xxx/43xxx" , 0x20003000, 0x20030000, 0x08000000, 0x08200000, 1, f4db , 0x1FFEC000, 0x1FFFC00F, 0x1FFF0000, 0x1FFF7800, 0, 0, 0}, + {0x423, "STM32F401xB(C)" , 0x20003000, 0x20010000, 0x08000000, 0x08040000, 1, f2f4 , 0x1FFFC000, 0x1FFFC00F, 0x1FFF0000, 0x1FFF7800, 0, 0, 0}, + {0x433, "STM32F401xD(E)" , 0x20003000, 0x20018000, 0x08000000, 0x08080000, 1, f2f4 , 0x1FFFC000, 0x1FFFC00F, 0x1FFF0000, 0x1FFF7800, 0, 0, 0}, + {0x458, "STM32F410xx" , 0x20003000, 0x20008000, 0x08000000, 0x08020000, 1, f2f4 , 0x1FFFC000, 0x1FFFC00F, 0x1FFF0000, 0x1FFF7800, 0, 0, 0}, + {0x431, "STM32F411xx" , 0x20003000, 0x20020000, 0x08000000, 0x08080000, 1, f2f4 , 0x1FFFC000, 0x1FFFC00F, 0x1FFF0000, 0x1FFF7800, 0, 0, 0}, + {0x421, "STM32F446xx" , 0x20003000, 0x20020000, 0x08000000, 0x08080000, 1, f2f4 , 0x1FFFC000, 0x1FFFC00F, 0x1FFF0000, 0x1FFF7800, 0, 0, 0}, + {0x434, "STM32F469xx" , 0x20003000, 0x20060000, 0x08000000, 0x08200000, 1, f4db , 0x1FFEC000, 0x1FFFC00F, 0x1FFF0000, 0x1FFF7800, 0, 0, 0}, + /* F7 */ + {0x449, "STM32F74xxx/75xxx" , 0x20004000, 0x20050000, 0x08000000, 0x08100000, 1, f7 , 0x1FFF0000, 0x1FFF001F, 0x1FF00000, 0x1FF0EDC0, 0, 0, 0}, + /* L0 */ + {0x425, "STM32L031xx/041xx" , 0x20001000, 0x20002000, 0x08000000, 0x08008000, 32, p_128 , 0x1FF80000, 0x1FF8001F, 0x1FF00000, 0x1FF01000, 0x08080000, 0x080801FF, 0}, + {0x417, "STM32L05xxx/06xxx" , 0x20001000, 0x20002000, 0x08000000, 0x08010000, 32, p_128 , 0x1FF80000, 0x1FF8001F, 0x1FF00000, 0x1FF01000, 0x08080000, 0x080803FF, 0}, + {0x447, "STM32L07xxx/08xxx" , 0x20002000, 0x20005000, 0x08000000, 0x08030000, 32, p_128 , 0x1FF80000, 0x1FF8001F, 0x1FF00000, 0x1FF02000, 0x08080000, 0x080807FF, 0}, + /* L1 */ + {0x416, "STM32L1xxx6(8/B)" , 0x20000800, 0x20004000, 0x08000000, 0x08020000, 16, p_256 , 0x1FF80000, 0x1FF8001F, 0x1FF00000, 0x1FF01000, 0x08080000, 0x08080FFF, F_NO_ME}, + {0x429, "STM32L1xxx6(8/B)A" , 0x20001000, 0x20008000, 0x08000000, 0x08020000, 16, p_256 , 0x1FF80000, 0x1FF8001F, 0x1FF00000, 0x1FF01000, 0x08080000, 0x08080FFF,F_NO_ME}, + {0x427, "STM32L1xxxC" , 0x20001000, 0x20008000, 0x08000000, 0x08040000, 16, p_256 , 0x1FF80000, 0x1FF8001F, 0x1FF00000, 0x1FF02000, 0x08080000, 0x08081FFF, F_NO_ME}, + {0x436, "STM32L1xxxD" , 0x20001000, 0x2000C000, 0x08000000, 0x08060000, 16, p_256 , 0x1FF80000, 0x1FF8009F, 0x1FF00000, 0x1FF02000, 0x08080000, 0x08082FFF, 0}, + {0x437, "STM32L1xxxE" , 0x20001000, 0x20014000, 0x08000000, 0x08080000, 16, p_256 , 0x1FF80000, 0x1FF8009F, 0x1FF00000, 0x1FF02000, 0x08080000, 0x08083FFF, F_NO_ME}, + /* L4 */ + {0x415, "STM32L476xx/486xx" , 0x20003100, 0x20018000, 0x08000000, 0x08100000, 1, p_2k , 0x1FFF7800, 0x1FFFF80F, 0x1FFF0000, 0x1FFF7000, 0, 0, 0}, + /* These are not (yet) in AN2606: */ + {0x641, "Medium_Density PL" , 0x20000200, 0x20005000, 0x08000000, 0x08020000, 4, p_1k , 0x1FFFF800, 0x1FFFF80F, 0x1FFFF000, 0x1FFFF800, 0, 0, 0}, + {0x9a8, "STM32W-128K" , 0x20000200, 0x20002000, 0x08000000, 0x08020000, 4, p_1k , 0x08040800, 0x0804080F, 0x08040000, 0x08040800, 0, 0, 0}, + {0x9b0, "STM32W-256K" , 0x20000200, 0x20004000, 0x08000000, 0x08040000, 4, p_2k , 0x08040800, 0x0804080F, 0x08040000, 0x08040800, 0, 0, 0}, + {0x0} +}; diff --git a/stm32flash_src/file.flash b/stm32flash_src/file.flash new file mode 100644 index 0000000000000000000000000000000000000000..df010d213f08de6410a2e73d870865d4576accef GIT binary patch literal 131072 zcmc${dwf*Y)i=J+ncKPO~Lgx2fd(MOef z{o{qtnX@lzt-bczYp=cb8^X2Gy?DAcQYwvG?Q$fGl`w`Z#?o}9g|4U zM|i{Em^2aZ;hwhvmzu+*v3RE7xd_j2a9@{J3LIkL>tKegf{&)33@!Wb z(X=*Z#QK=V%66P!QWP?T+ zxj!kfefW=62Uf}BgfN@&Rk)}n&}3ILjDtN^zfE-(Fn5v4jIF&he1R6@>tfcLa=|>y)pL}Qei{s>(7aiJvapTBgk#fX%qugL6V#gnsA8ur*ATu6%U16*%7+}b+$6M(L2fQpr z_e#Ybts4l7;1r4SjW?L#f4#CqC=fe~1vdVxcH@meS&hMppKlKuO!;*?aqDUl4OXhK zg0{shzfH&xIf%PZBicd@e@y=<{Y^-r_2g*w z`8dczKw08_b9a>p2iN8@-OJbv@leqlOb(Qlg9|p1avmCIDOIHMj$$DaUe>UyL<~bd z#Wr31u-p&?L0^wwOXph^o`t|PI(|R%cz=0Nt?96^*32}Og;09&L~!z2r^xmc+dfoO zw;ED&)l^kfk*>H(%i5--zjM;b{&>>4ObjXGgplI7_0S(rj$lf6a6GH~u_`yPi63@a zoNGE$Q-!*3tF2v%SOE=K9J8zGYK8i3Rd|9Kt7EQCiB%S}Ne^~pE#KbJzHwZs(#D=x z{gUv6Fs;19v3%4KHome`6cR1$SpLCrR>E?NPX)7PtJ6U*9JB0g`O^3i@z~RzfaUok zSkCpua?Z1-*qE|Ti=cG;HSo&V+l#aG+aZ~Y?Tb2E?;`qxFtWVJDPnBwvSOmm>6SBN z*Y8=KPyl_J*w!hEYdZCftj?{Lcj%j5>tw95(<&Tqe*n61eLLyQ%65__WNEb;Y#~XK zJp$fSA-B?s4#E1}w&lpXz73LFvHzs=TQe3ucjDw+;SuN#;v=B%!7RwpQraCHA@qt1 zS+C{l?arS%7k1RFDC>COy61Wwe(}+rPFt^IM|sCjW>|aER!p&pPnLJsSC(~*zND#B zvfa_?NP95j#~EcEHDgLT9?1T6uPD6InJTR9WY+2Fr5$N=zMHeKGq>W9x=d|H-rFZf zSj#(7=ahDgyr#UvI$QX8X@}kNTvwV^e1!cR5`UQ)6HGZXS%92p9ygYnbzFivE*hz# zj!x9ExT3=*%55vqVJlVD|1sL^wJw%vL9Y;0wCheLmqQ|Ub-S9Oj~NeGhwWhY_%)q2i@o%!4k0bkW`qan zI{q1kbXj)W{T){JK!;6`N^Nbf@h=qHKNJesM7z!kz-OsQJwUw1HLlanuIiMQxjLP! z81g}ROPTR_^J5cPK^AoD=H`s1{h7fIJs>T7*TLM%i8-Y^zsz7x^aN%+(qq}nS~8lD zS}g8jZpbMsk@FzWk<`QfI0=r9-C@8vcKyw;edkh{9615njo3w0;I?$ zkp?Iy;&Vs~o+#lMEmZ0gCC{FiQ(`%?yo4FAMVTH_W|VfdDJ6jx!gYbd*?6vV@O~b3 zwS*K`3xj=ujZvI!`_qL}z751-Nr$lPO-XTNmBQ9T@`19VCTre?E@rhJhQt;sC2Knc zVPxJ$q}UGUQfrqkFIm%Rwfvw&+IN3R5ypc59sJ{f4{`WZRlw*W7YLJ5bazZV^<;_d zpapO5cq@KA3rFQW+a-uyM~YgYZ8y?L^JDdAYOQKlYgA>@c-^BGt7U2dTH?a!HR^ZN z)^WRvT?ez&9G*5hI&<7Doq|-3m>@GZGt#4DI$6rq#d6+rU4r%RM>KVoI!!GlEqhv? zW<4xl%3@*{wb3r+%`Vv@$1EqumWI$miCpk#Fn6E~?~`o=A?{M7(y@@0Jk5Uiy)p8o z#egX7&^Ow3gwBFN9m;m8nQ9OtD4RSoDqKIaff*O{Fu!s`tK+Ni^qFGY%$YfDYx5SX z^HmwOn$$C;VZQ&F5+VFflm$1~$_>$)`d6idc`QfMjVb+BU%dmoKd5#GZ~nZUd7_8X zja;OzN86rgXH$3Y3zR9jUMB6MktR^)dU=-U&Y* z3HLjowG^I>*eCs^>ZN$!9G^|Ji{p{~e}KcXfco*!UMzAOh&CMP|04Q-Jo4Hf;*nqf z!G4uvsa@CoiXm7Y`O?Aa%3O1QQ}WfpcqAHAm>~J^FfCAaIo{NN?pIkgn=(rMf$D_z zH>*V+q3y|r5jr$6RhUxkv9zs3%Ay9Rp5EY^=?Jqau0qNab*Yf)&O$bMFD$UFS7Nqa zdzUap=ya+1v0(I-Q^5u7V6#fFQ=zpvQReA9^g3*~tu3=*Z64ECsP9FY(u@>)Te|UH zpXe5R2l7z&r?n2d5^KNI!#*sUCmXU@JWV+GY}X~M7Cub55icU!_;8L3ePxv4un1v< zE}NERr}uP=j^A4aJlE&-gr_@fAF+wc^U^;;%4M;3f_!h>k8>^h2w)@adU&;eeWv8& zgXrJzOwk7mWk2(`o(#H-2H794>a0%5V#%Fqk9M>WRw3G%!_<$uwZC_liMtdwN3qNa!T+SD}F1&`ad zJHuGeSD@PVP-tWH$>>O^T9AF&K-8SNZBNRo#mx3XaqhQQm2`ZXWqUqrg_4`;IdS;O z=tP&-o|3T>Z?+FH7Bn7Yh_TW7{~7K_(UF47lNlzg6y174$Vypddp>*BG6msmD$nIP zdH4qX{{?SBH+XP?LwC&zo6ZKsh-)SHEzbLigI~`(a=A3EU0p)TDykK)U00WwsNIRf zY@e%uas{-)4ZQ{GR8`oWZoCjrw$bgqDSL}rT+kp&0VK;X*7P!&$~TZAV;*&VuZ!z# zI>s}X+oPr%uf+qftnp&9prcgcn0YR1qjzhUi|sD4ewYk1jFon^v5};Yv{@^2=7VBR zFXb04q*5s4@(2f;Fxs?y8L#=~8WpHiBME$z#V=X-;&?aL3rSB%;Zkbf0SR;uNWhPB zkHiYpD%B6nX^=n_(LsH~G1n!oD_k=VfBbyoe3jZI!+0kK-j=a_P3T|DEiBFo1j@Ff z3sV10S24@2R+=#mc%{HpK4RuanPG_rS_sC~#N1A;#<$;Byn6rYnl$J$Usa|nV%sngs8P8 zO)xGy?aNgfsJ~lOOMzPzLLOK@U*Fai@H$CQh@L!8RJLIjj5(Dogv5{~#0mvD6szyT zIM{XR;*zKv{aKbp_paD8JWVPU+zp++d@(!+rHlG(ZEg|s%WkpY$FXNmG{){fkyR=f z`J&*4@1Zb{-p2M#)nvdBr<1+%tTVjAwt!dR5kVG1cG(gV_T+=_lf8MMoUlvdy(zFv zz;ETd$JmyB8t z)I{X9^QhLn0Z62*gh3W0lSJFu&~}2y8m4xOM{b8EGr6yw+RbRPKwd)OYCyDh1=;?_ zy1W$6eINe)OJ>+cOuc03y8A;eEs+j=N3&N$3vySM&kL;79{3h3d`8#uR$P5? z_1==qqsz_Q3glKGcb=Mno)=iEZ3pZR^u;C}&4g3|sd75^fli4@M=^7+MDCSC=v>C> z+@ja!UBY2UAHB$godei8Ltu*ldxnD<+Wp{QF-n=rF|&?NF)<5)SvUxj=@;qq0x~aY zwm!k+c)STc7SLlk$CLEYX5L6MFB^H;Ja4p~$@4M~rJH%F$V(km%DjNYOAvHXHd@%e zQPi`pE(&yyvb4tGlX!8q4W!yHGnw}Z^a_X6Z* zAonihdJw+^xL!bA#-Xn1+1_aF+|DfS5JuDOjWYRBPgk>O{wC-bQ?6dbjBSftO%9a) z`DweBYV3(Sjn|{hZP8ZDV}{a4{1U8x1e5Q4#RADFxdN;Rd|b91^{`S(o&_oB_tmU< z^(%ogN{3CE6puU{AMcfd%qWSm<_q;4jnx*PxLAPCa=3re6dk>$cJC=|{m7%)134Lo zApP3;2qSt$ehFJ;h4CFk<9uX@)gU)=7YUD)0Vuw&)f^ zW087Ee~OWQni*@Nf}Un{M@9E2$m!bCJ`v_%&6?OVb;yqDr!GGt|q}~=o5^e;rRu% z?7sf?E1{oghw7bC#zyeB2;aq`WWl1P896;dh-|wUqCT-RDzGXw10jc@#GM4;O{vvN z9k6-II46Fkg%U=9D^cceQMUtl-pBJLp7-!<#q$Q9xA3@{Qb8xw?DVEW(*KHDs zA=K34!0#J9B=P%tM8Lr3Yjd?M1CG0zNvo_(E@~20Hj%tCVbXSGq#_jVP=15acvbHI zG%n258*58W9L`Z`E*veV`NS?YkFU8LgeObVT&A;0DtyZMQ5O^3&tP<@d&x7Fe9dd4 zGGomb>ldO&*DK6$AajM%Ha z3VvVi4dSH4T*OV-kXX- z^RS`{KQmA!V5Ah~SUdVaFOw(*n&ZyW33nC?l{i0^mT0-xM2ir%ev+fI&i#yS4wPxR z`x{41?Swbm4_qC%q;dZN9eb})&@1x(*toJWP&V^;Um1Bpqt$%%=yB&mc6o2-q3jx>`@b(R|@b4tY6;6xpQ%kRpeiZ$ip|yof{2;*eH$ z;Q*wSLryXwivT&DLr&q45-S{llsIIjK8fe&^L&|27|54-K6JWP3~i4(Lmxz4AyKx4 zMm1yiBQ!?0%oM{GgtB#UW=dGNPz+}yMkA>OusK1yPH9;@O`zYImT)omSl@|?dwhPu zcsR!PtwF1ZN-q2)X2m1nNy9TzR7lP{Am?=6D&+=~$_;zUm}VQ7v#%Cb9vm#xgpeH^ zh~W~11f72Cw}{}>5~@^;S{O>9GKJ^ixvp0JEOc4I!Jl~16w^1SdklxI&Fk6%Yh4t}MSQTRSs~W7x)PDLM+t2m|AWg=yT$niEndJ(=#*(c` zYw-D5Gu!t_5B7g@S+lE!`k!FDgcgXlC%n_MVFE23jR~md02SeDM#x7Y~v}Xo)B1ac6QY2NPJWd`4%Kh4!KioGE&X=88HQ^`h4`7InI? za^w7cmoxLk;a9yQ=1ceWM_T(nIG!fFgxGd6?roP81N^0i2%# z$BJ@lfg=e&A!^8}M$V6s!;o_?a;(C`$dQn9D{>w-bM8Qn2;QvVZGY^8<9384gkMKE z$#YYTBwVw&W{HgXa(`q+Z;84D)`#l$>liE83R+Htf8RS>y$tDT2>&crz1Z?*KpQbn z*>;TwYgh$$E!pU`{JB4JQSS!ikW^E3zm`^%lu(|Nz_$L#>0VZ_!pvdFN!I6@LG@XReXmT_%c)HSwf_NJny`q+3lKjH z8YQ4X_51HZc(ZsrT*l!h1MVHb%{SrR1zegim**8CuNirB%)B=S(a7YooW|iifcqsc zdoqttLHtSJO*HZ92jQLU`QUhlK=MC&JOl01*)w7B1i;zBBP>?IcoQdza1O$0g2MfD zBbI0rs!JF&l5P54Pc~XXLi>cG)7W*qh0>O!^A=hgOGTcGEZT#=7|CQzq7}xztuWEn==UI!q_PEeiV@f(X-@LHuFVX7Mo-mE-_x2wrk zFw#3p1LskH^9b**=nPlURN<)Lh81*6sL_kD3`j0Zw-uzr@9dAvjjn7?@p`uwPZh#v zpq_}?02Pn?=jnK44Qx=Tk4YiOxfW$Si?FLH9@*T(3R0J(@!G{>_OKJwa-*y<1@j#X z>~g#a90%i(^*uIiFYF%8qtF%$h{ijhwHxn*1!a?|woXpzPz-!b#%Tg$SFb~}9C!=X z!H)Oaco)GRIzxlxKy^>dvu5{LHET6SSj@xXk&Ak0CdAm@M7}H{l^Is-X(iG!nwUHm zX#)R+{03$mqcOjE1gmM3B4W=;2xTMX2ff)#Sb^xyM0m_;TJzD?Fk?$}{KRnuf;%1l z`r0VrB<4?}mkXFbIWRB!X*{FlTE^t-@D$mYd^w)^6PfgO0h1>2F^1*<8hmX?Es(;? zkWj`KeHg{~T9p-PG?$4-4r9JTbO@j5&>FHZV`jKY9fR`IqRQ(}Vg@q_Yx6Xl+2#=s zGZ~xI0i?PzHIc7;q%X+{q-!-R2+~RGtnM5&k&_c}AU#JFsPa753w1v4;pRRn^#{V9AR=#yXU$mdzh=X z#1Z!8daix4M?e@lCjSFFFdZ28$u7_w2{UNyTgi%18#xNKbUXx3Q#dt=$U>J-< z>$r!-cvPD;42HzZkcP#m)h-zZBT@H%A3IwEs2*Fj1;bz@%J|!`80)p-VK5S9v{*|7SSC^0hIv7oCG4>GweDd0(TW}r_LCSi!?scxR}8I z?2EHC!;TV1XoGv|SG;d0;NLw5o;Y-9(plxjBbiw5cJ306)gQA+6Dg*f|vB`}r=S z=686qKXm!oZE2g==3zb6mOtq?N_}bi=G*gZojYu4{@*Ba=}5o4_8MLDr*qiWThlgw zo=GX=0?IjjQM5kp`{41x8n$d z4cKv>?2ldkR)1Rc$RV&JhrsGS_+$GdKkbo7{w&XgFxG!*&xo})W1W%qXIT1GvX3A# z!)ZuKyJ~N5H+F-AOo7S`-4CXfoMt2(#Nve%1p1w)H1Rfd_3Z$xDU=o#+8{Hl`2WjC_;6mgJP!75AujW8}X) z`mhlUvS4OE$xKisfAID|S(Icp1wJX4TeL;4ay97d7}nE#x4JwGduaM?_3#Gdn-a7t zsl5z=-H6io&L6^w-83qDUsMN=SXA(A3hTGY-L(~oR`?d@Q7NkQOQp+!Sy`ncgjK^k zlY4ic-byEi-0P&$Gy8d!>nP1uN}O2QK02OGXVyv~2Yxmo^m=`jt@P8XdQfs#HDEnP zY;#u$Q*olRJGcQF=ax$CrTRL-Gdk>B=WCX4Rr1QaeZ|TB#99S<=d+hObRD`P4?4vF z>H4RlWr|9Z8iIL|;z6v|Cs)zRkJu(x2_6fT6cDfn1%DB#t}wN!Y(zKIuR~czbf9)2 zMF8Kz8k=rH1QM+t^uuRWc9%#vDS zsV6vocZrjqvao`aGtd^fy&e4f8MtJgV{P?SInC>hY-pk618uAUqrXwPhEnlbvv1w* zWPju=|vEb&=jm!=OCV_F_T~8YfSJ<_dPOTl>@NK3C)w$(~(2{Hg(7A zz&IgP)|M)q4z(85)Pwq=A57d07rYuDTQEn_6KPmKJtqyTuY=NNVLyx+GG@0Z)5z^%}+x_-~S>OSXM0I+=aT@vn@` z!X{;R>9vlpGSaJ>pwo%mMaa$ZU&|~!H+{3su-L9;l%L~U>KA58oT3fCSp#(I2H>w{ zANUEj&bQJp6g~?2>6_m^$wobjw3WV(2f^*+a36!F%?N(0sVjKnZDF=={?eKLMTTIz z0_57bx=-l6fp7$BYUZI(cm109L96fmZl+Rd2YJ@uL_&Ft-I)V)o6F>vsh2ZkR}dY z$97R%P)e#6DG7j|y!^iSVHy|FeA(@~&X$gMJw{g|vOK*3@f!MLk9~7O;eUQ@uVv=7=8$avgek z_hW$o?DCckbQ(*^b^BA+xs3$^EUaHzeHn+$_}J%H80Z+S7zM2!;X|uDQ%|OO^m@Oi z+2^O-HG+|l!#Z09p%YVS#L+ty!jmvcXa6r?VO7v0|6Fy|SMfV{;rt~==E{$bJ2*!v zez(z@;LZ2Zaf^#`AM$G_;g%){KG=yHML6mXg6c!Dq4Y{A$*-jSia+E|Z!_YEhd)NR^6owu15q|}oHwC}o z47|P-ofN!z$K#s5+P72QalN`6Yl<@MJKZH3+k1iy@@-a+9X%?c6?7i%Wt5$aS>zYn z<(+~jhsG(C5#(i1zJQZ?N)`PE@k>3Aa|DY{TomdNUEV2T936~jLY$WdW(&hoeiO7T zo(&%pC*#7?_=#T8V7*1)UWSA$@^>Jil{C^+?QdMYt|HgBIx8UWRPy8{PX8*(urz`Nwt7e9l@z4rFDK>!klYj+F~y7 z^VKn##(RGLh~#*F-1Fy5*OL-jA3GzVKOYn1caEJOi&_)sH<=IP?)juB?_{2B-SdB! z)c=I`Cp7c%W1{@iV~oY)80pUH1L@UiPf;IeJe}+V-wWFt#tf_fH9h}#`tLqV|8HJ> z%Z@A0)&3o#(GVR@`C>rq|$OgT|!F4*RGlKl{c8mN(d*wO}S|?Sb z)hY*TUQ({`s&@Jt5>QOPP#*>o(mep}PL%dxbokP4LTPJ;YAvrZ^;oh+iPl(-J?#qk zBh(%=7Kj>jicaOgE1_}0)nt*GQB7;Ih7ITZ#vnv%zcgOp{EXkU=chc_|0_Jra3ZfF zj~Q-2!N&kT(L`T0&(2vEm!_2Pv#pdK{FG5YHuFkSe$2!!z2MC#%fdb)cEpVvgM9Cm zO|cjc;ylxQd^a!$MErbc%;n)@4Pi17Eh$j+3C*cUhbt;k1U} zbjDI*&tn(Q*&!mF7DHNUYAmhyg)Y21EUAk-Qmt-PQ7y*xw1fC`f@g!y<~MsY}NBQV}aLtYQkn0`?b*_KCW(PsV>MhqHeGHSmrs=wp^Puk4k7=Q;*O zo>CS#!iy96-Kc(ZY`Ed)4h}C z!zss5STM<;oni~7*_ToFn`0TVB{~|!|5bv(z{E9Hky->9*9hYb$XUV8tfU&a-Rll zQdjOp3y2iVDFu_1 zY{OC7{kkCk0(1mU=iD>9mT1gXH3oZ)0zfq~;1s(68mOq<&G~SlF%so*8LO@)+Su;I&#z zxGRUi6}4Y!!leOjBH#oQZrTvI-1fO9oE31HI+Zwf2t;c8bQ6LBVhRs)efcDzFF3o% z^~FuCj<5`E@|4oa8?2?NN$nziId+V+!U|v95ym-Jcy_w)Q`CBdsV@@hB!%f*pWN-M za91fE`x!nC^fBY=D4pUH389A;%*}`k35wj9reo3-o*}&PLIg zA%Gg$G72-St488#+^KXX3$UM>u)bwjk6C_xSOa@)IQKUR zbKF8E7hXLJoTk~o_mcGjYny~84PKx{m$ggr%+rPL!07Vsz?h%LejRx=_F$x68DIYT z4d}u4@@~a(CUsM8_SF~r?cKqPCpTnY{oT@6db>|p^b9lP!j~o(HTI=keQ`cP`EWwi zSC+({9CMtyBUhO6suH!3H8FU-*d!RX@vkx$>c?&RfJNWj7J-}+T9ww;ZHCi4)5Bd9 z?heA%1{X{^PcQz`>@&xb+J2s1{2p0jPbvCx6lXk1Bc<>s92cWO(SLa**fg4<`I|rD zsWMW-JeBkaFf~ZKoH2tjs>^BGU64+F#@1=NTH&$95`f}*{ zFQSS$>by+-c^Dhjz^RG)@4lgSAGb{dy?a5KMzebc=+>Tx?$1oRkAD;0aMH>y3jfe- z8LP+H_Je^|x-494w$kp`hx-!25)PVWea|dwc&jEi=x7t_sTZ_w)UZMTnMW(iyQ2fT z@2;Yi&fB~x`I7HGJ>IVSjhBRhuOV*XK1+Y32eVGQ-XA#?r?0QbYS|%!;jHa@dGf+fkcUJ?%g%Y0ZY3#Wx~1k`7>@)KQrxfT5P*sUq$*N z40y9g%oftI9z+^*1jaC-G5`Excv-&B>o4l>YDEc;VOUv`#=JSGru)pAGCf_Fhn3VT zfS3#Ip*8vBnEtZK-7b^6odeuGbsp}1X>#|AZ{m*Y4~=(sgnd=J2lb(!!Vj$x_D6&E z{>Zn?a+eL1yZQ@d*nae&S?&&Au5#XQjXrL>7`+xJL#WSkzxUn&zqda!!7Oj=KzY;7 zQ{Js+c~#$39VxE)W4^%l)$@_1B*7a}7kG={7th2hp1=9>M9U!c zQl4s#EIt}p>iNhrH;Lz)H2^`S)5tP&0DIa%9!3^mQ>lTMaAFeNrReLx-`(IZF)tts zxa0HTX9YQ?Bu6JoJ@2gGZ*3QW=2f6B;jIm!eciCM)58L%ovK?0`9u6WF3bULBblDJ zv=73<1&;6<%?0nAW)YQM7oTtV))_B-SDV4-V`(hSv!%_qPV{WXu28vgrr%s^_M20E ziI(c>OZIBREjQXtGIjrx_JfDP_zD55CXA!YhdaG1=nRmu~tgUw6 zhxj~%B_C{yJ=uFNGP!6px%lk>7b)lAVv5N{;n#D~HV->#)QeE(K(Zf=MQO4N?QfQL z&p>G_&r@2OSsHz>@^y69(msUuFXeI_tchcY4GUdCYFU$!dfoqS>(T9?WdJ? zGco%=h8~uL5(YuBeXqBh--4i&)|0G=_Vfsg$rTNWFDWRF{?B~ftyud!fR#pqR0bdw z6Y_`gGmtWe#GJfHME|D}Y0ZfCm6CJV|D7DL8?tR`*pvon*7DLJnTmuop2B>dr11pi z^ItEG_qa3|<~bw{57tge!nB&3q{&R0n@pO4Z>0H*DPiSnCHzBvZk@hH9i!Ia48g0Y zla250)>jt!->$M^gk}K>+t$5((x%9Pw@=z-U%+N;WAy>7UNDxXBhBWM@50WOB3I(K zNcYj+KqhRp)tK2Q2Yh%>?ehid@hSK{m)=2AG{mx}KgaI6tKG#Oro zyC~$ej{|R=w8|?3R_xf+AzV_F6ZmfP$Dm>9`#7)??|ARZKpoz_y>$Uv(_0Xa^K*WQ z`mn+xKl5i2HQV`lzp)R1T1TQ*#c5RDSKL)T%u_3?5<55aTZ{gLvjI3wAyml^ z6?f3?55-!^Ub2L4GulCxk-k>OnTTgNwuF7^WJ$dD$S<_-i~oqPm(m%{#5W0S%4^t< zrQR*##1Ea%Jk!6g=64cc@0zg&oH&uc46uEkD%MQ1K@VheT`z9^@cI#2-s|na9U=%V zrBKS3)%f*#(3*=V?wbmZj{B7kL7K*Om}trkL}OZSP(4FiZYCTVX;z&=;}N2=n6;`J z*z%rg(4mkr^*;O#qI85^Kum z;_O%=CV3^kQa3~suu4bPmhH2*Ge-NYbOtu54@0z}W{@^C`?01%GZAZ;LjPvYB7flf z&0kXc$1GOTgR5hu9c&`$fj4F;^;DO3D3@gElyh;+p;G#6yuTdMo>S4D#h0AjelmK? z+?emI-a_k(#JM2vZ6AS;-V&!#2K5B=zL&7Ga7Oc~kDbAK6uTe8OQNxW2#Yj@dj(s&X3GiSITTCW$| z$8%|59>q0}Y(cH>ug3-QU$6t5up>ik1|*gDHImwXUP;{pogv#tV`e@b^iBEIH3J#@F2epKO<0P#p+SHp}SM6iVdrPP(fBDP6qH4_drVWtWlxr z&)eG-+$J0p46qor!CvQ#L{`cD0V3V#Smsf0W7HnMV z-NCyH8}b_TTNOiKI-Qs!F9>-`6=3YiJe+DW^MbZy8qNxuX{`fk(mL6Et&_fgDSpero_)P5E>ej)GrmbCUmjv~WDKDIVo_og_xt z`YP5yqt7GAP3XZqt_Ou&4}d}1$nD_)=#yl4iKi;LJEWk!F=i@NvM~+Xrt$GJVL1=@ zn5?f!l!&jj(c(pPifGbLqVpBpThNw06I|s=g`MMCwAbh&*-a!$)pw5E)T;knSB+__D;Jilh3b1QN=~+ zeUZ<4a7wU2kSlMkEkk~`V?ci>me8Mg zZLf6|WZo3EH6%`U;EEr#LsA-FK^oh+G)S7%J_TG3)Q+N_&D--=+mCJc==#G-p1!@_ zk9FP~M~0W+j6e`~)=0*6r|HDPhwT@t^J-g9O4Ld?TPQWZn46*Bo|~qhfh^&WE$yRl zixffW4>QlfBb2XjO0#+Xi|xe4Y;ZwmMu-cujnNtjPJa$LKhZw4wF_oU|Ay8cyZVXk zhqfnMJ5kF-YiAGF+VIg5t@<~V_7QC7JoHn##o(vCT63z_7l}vl-4JfJA#HDti+Z7q z?;N8xEq9)BtK4A0yZBaoc~wT|9Jra|<-PL`MAJ13I;wDZ*Q>tvb4O*;?nU|BNxdFUzCFEQ^OtxnKMJKyZ5 zmEk~(KX*6I#h#8_+DGSNGe42}X<-=}C_@A3gdOQZ;-rQ}J_e~L&fYN3;Wj4!_rMp? zV{j|QQGD?}Mh}4E1)!MKM|bhaN`AO zVyaH}hLQFSPGv}at>k@_tq+t) z3FOu`Oa{-d_G0c(k~)~<0Z0q(`TIZTm3bP$D@G!+6qx-^HTh(&V8eQN;KUpFT6?av zsdcDjZpSJBPA?3!%(<=7k!%$g^ZX}D`)r`JL|eZP8#=hH7jlaK+qP~6)kIq}w$-c! zR-dYa7)3E73CzY_UKmFxdwsB!Etu#U*&YxaJ2da?3NQF z4t*zqaoa_=ZqbS=LpWh+Zt;z7X6|QvB334X#n1Sd`%@o<+?C8-S@}%mrkN3&7p4( z=uS)eVv{`*k31juH4lzI8+SF+`bzWx0W<`BzsckXr-gB^c5!Wp_w&T4M)L@|8KpOJ z&1rXS!UAB$4&xo=xYb!W{q=5C0zFp?-Gh>gRAEmVQup!H+?Fae9kJJVEYeP2#VU<* zK#;rIX_T%~-N@a;bLX{CE`#l6AqvT*{Oux$w_;SrKfx_VL6*@pwjjrS0ltX6zn?}# z`i?jc_Y_UjdLy@-PNw7|WeQThdwMee>USc-9sN$ZH?p%&+>;5ax8nvziOs>+sQLAh zaWTG0&Oj}gQ56&MtHm7ny*ElJANSC21H#y4jw=X%#nb--vngi$k%v9-keQL)BjK0z zQ2Jka`p-CSe$N7=Y)1I~_U&2tx)o0!9`9NvUFE%I&O%MD+9=<#ev^Fj`n&E}>rTf- z6A1}T0$$D#2}Mi^DIISyy2S_5auL)lE+snadmP{Gk|r%Qf(}8R4sDo?d!%fT*a!V~ zRk%QGv!KQ;F}{1xh#!-OJJ!pUYi>p1iLzzX_YnUwH`zK-lx@XHJ1SE$TS!LPCwr)c z5@jcFCj$44A-LPl@a;A0LEE z`n+uheRu3?ajSDc`9F9r%|T9?x>^9r*O-*izC*OM02muMh5?L!@&0j!-fZNqK8Ic* z=uJNly+UAk2hmIPtRi4!a}4TPlMqYgF>pB}EBs{C%Fy$e0M4xVrbpo+hO}N&0{E_N z#)$s~9Gw|sp{>nBDH7eG)R6Bg0;kMxrHYDaG7*!hK)l;gjm zfien9O@8u``$)?K*smL+Qp?iyci$v0ylK--Yc}1qR`y=KVwSw|&NY`7RTmb`u7(|> zxwZr2BmKREqsLRegK;&Ks|BOBkf1)iL3SS4Ag4)p${E_7JMZ*358UZVlQw!Xw2gn+ zI8uv6PWKh7*?2ooy9zSBnFwW^K7spC(-BHJo$5`a6x_SnTFvY!-iP?Qxx?$_E9o|G z3f9u!MUSC1e***BZ!&S8Mh1=9eOL=7uV`d5dE0$8vOfp+AW04Qt`I4w+C6HD@flVy z=c~`vJB;IT+}mkr2hcvQe}pjejiWwBYg+bv1(_g-^0^aA$=RtYb#x5`Uaj} zf%MHpzjB0`j#CS$%R;1YM0!os%|@CzH}RZHkaHWAuzHl4ej`txj&xSHzwsvMfX6k? z%v;IxCLr%dPHhGoZ{{rHIWFXUo9E1Axn>T|DS!hDa+V`US~I~+UxaiE&iJs-1NIv2Vy zSGx$m7iqP4q{@pl4etYZ1pkFvZP^^JRux2lNihoHsT4s2F3@UjzX1H#md)@USQo@v z$FGj1JFmIvwnT@!YWr|`7mc?-`0Ji&A(Yj~<~594cifAM`LeTnx6JDAjmcO~L3^r7%Q z@SE^{A2>6&GwFTgU9=T{Pv?FnJp|aD4>0NF7?Yl){DHlfeB34+i)8oC!VQzLNPcfe zqg$muJh7MVh>S%%u@v5yC9^Nv&Ax2qeR-abW~Gds>BsTn?YP}L1GXjO>GZA~$tYm% zJWVpL>d#$Fw?a$Ci!m3{{0Now3(yeUPF65WP45zzWaRgYxF;>W%YpFNe%E3*Zef;; zTLv(u_KRm>*au;-e#_$d9OLSkME5k+yvA({-L*n>fr-`hILF57BNF ztqc4cvj`zH5+!OV@%_`drV3Uo%7)IAA|doh z)EfGg|JM&a(vwk9z+v=z=M91ho(1DF>EL$30XjNhZuU1GZOz>9JRqdqv z)o7z_U^V^m)M~oStKXLNZnX|4a{g$`# z=5^~g-gED^2Os#skACvgpFMpQmAGM-PF6|Yuv1^m-w)|t%)5QQ9Xg#f_xWmYD#z#h z9{;^pS2@f*I$11v!$y6qX~AHRP~XQ+lcn_eZqXNb!^cyEx3KF|sb4V=zFr?=!e7kc zzh}ai>!Z!|BA$MynO=$$S7gKF4Oi;ZVe5RpOLh2ORX*Rv`W$^SES}Fd3wJ&S@t&y{ z!0P#YQ+2ndfVV_d1S!Q*kl&%#4?gKQJE4Yd*3rRNadji(OJ zHr_@we$$QGZ-5)>6*Q`T)lO~py+oT$nSSA%ONy7QxNqh2|M}*TNN>E$`1im5`H#+y z`;LFvE^q!Fv;u1!yocD^L{Dnis=vVPtX;S1iBViI9_k~Wi$9e&{|fL|;QdRy=YRT~ z7e0gUqECOp-?KjT;TBj|!82N=UoyISnQkeZVx~RG)7p931mHgb{9Ul@b>O?UY$Q@1 zLyGHDd5h9WzQQADshQ|AHdrfR&o17Mvrg+T{ZPZ+Uv}&9l)pV#=;(3ys@hWc2R+H-twVV9bNs*ec^YmV;E~{e zg)`=2h%9d!6Zeo0Ama1`Yqk_V&U2WVLmq%=jNmyB>+)v7GwQIsIn$GUMBZG%N9_!p zSKFxHrr)Bk))(mI`V4)XK1z4#sk)tWw?S9Y4hMX<>kFwpaNR@+-dg2Nx`KCYWu<;4 zLgdV3#P7Aw0PmW6n}%7m~2Vm61^XhK|ILR@A-NPw8eAy%6Z(;+RQ zG0lW<0K&~7mYERvnu9}()!oD=`i{)sS$Zzsnr{?5l2l;hyv&`rJMT`L?xOTHXZp^L zV~mjPJaCHxIV&&wyWx_rLHS+^>poH?>t23#nJx@D~`q4ZhFxsx*u( z*J5mW3ab_?AP2d+2;<6)=rwm>Y`HgluRe4{I@(VCp&p*K4$oTNN}lz>c6sYgtoh^> zhf*C%hK zbS7VnUn}OvES@zjFzPT~W zk$E}1een0LaHnuY!EV1>m#cG-0}E%ujYh1#)^7X`x!KS_xf*M=fvkai{Dp)-!M*jh z&-m@eLBJ$N!$l2D&O{EaDpI|0dl7DvUkp1)ZTT?TgKQm*K|ws*@zmlWAB}u9YCme{ z#JZ=sMtMB_30hB0u21g#k~#1V8SWzP{}Fty8*AW){Dkj7%m}h6H1d;2ask@#jh-3s zNLH#2V?zIQud`0u@WTy7n2Qx*E>?uOSWVO!EbqvX58R1gMcRm8pSDqkrq)C=>z(kP z@?*i+_{9^v-0isY`o!U1!oS(kNM6o6 zjjowT4zZb|kEU}XHhv8cjfs2l zB>OFmg|vnM??_37Ph{ccO~KddxFIAkuZ48y0G{INZ#N6o?gnA1rOh(c5{A`)bxdfW zVE)aJrGRraJ&eBYtCkwl_PXHZP+zv8FWbBD zRi3Ym?|Dp@n-r7cTLH^j;seY(l0COami^v=v@I^ zQNA3%F8+&o)&PH4RRA>Bwg7!M=kK5Wy^)$8(s~!0t=U4ez4l$Ry^dWLw{^F$iRoAB zShGBBl`jB2oZ`FJg7%`Cx)@3R8GmB!k0>C&t`C-ejFw{!Sidt=^vx~sq zES0WxYo+#3y}t&dY_5x_9EATwyJ9rDk|$;Ux@it5^k!&wLMXZBEH|g&f zsCX~Lvk1>y=<^J336BfU)p+Rd9lQ^Cy1kv&j$wnL!ER`wuiD=%@_RwE>g`5qoViD# zoDX87P|p25bVh>a1nGd&n#pEE@57ni+Kuv-0~>u?B*=((#7-+oyoJgtUr}5vFJ51D zhkVUlYu4Pfk!IK6hyTq5;(_?4K7~CSCc?tBo)meQzD39Sn#Xa-=@^+|Ta25lE#vb) zT7erc9V0Tt#Uoa@T5@j79jC6a3R0oyHBg41C^CJ_C(0$#uPD2;)v& z(4L3;Wn+<O7ipdzx}}xo=-7e6v@Ow2xmZ6ug50q^M^G}(r(<9A zuC_x6)A>OKJJ|olxm4I+!6mE#IEJ6@Yva(ZOm6-QhZR_B!v|!`VNKrWZ&&yL#}wF~ zfC=k{`XHtHEw8o#y0D?vCro;qaOvLB8G$g(0a{PCVrJZIQe>W++FmhJeJ{O=koG#| zz3i=}wV&#hSPg##wDAO9G|PGc@x}UHKsBOQ)|S{0|Juxf&+ofJe-=3;-+JKSZ+-O7 z)qe&Hvm2v?%%0;I)}v%EaRv<=RzEdE^H5S9FrEf2CHF~QpT`mZIZE8{h zZ8E9fiL`A<6X3P2$D7W)qSeA%fJ^avIK_%Xw;?Qft~#;~ZzZ=1xl%RjY}?><)pr&P z!qib=8CJo{{N@;GXE*ba)rPfBKX622Za?{QN}~^b-)3AND{5Yjbdp~Ms9mn7$YeDW zHWS_>*Nr9M4t*T?Uaz!)=F{4S3ec^^-z>s@@#~mbqh1=Ia&^IdH7_TlAKoIz#vOma zCYyOBp823aKEAf07{78e!oWqUk35FN_x83h*4Kb5vKdGx525IF@)v2;s%W?baltD8X2Ms*Tm^LaJQZ9@fn4-ITAQPO+=hqNGsu4= z-+|UOsK1lXNb}`pJmf=?AF&tj-{AQi57`6q89u^8Ho*sc{Pnc*NBLjN!%l1{s6L?H zug2x{5R=nFsUbGS8A=IBAvU>2?bjTke$9>?TgV#fgOvNcW9kmnN@Pn#R-@bmaWErsVZU z-a0MkAEBI8j#3@JWgToved1l_OT2GMt$VQKK79ZD?h+O{sEM`ST-YUlf8@i{utj-n z^M67k-a|;)oZ`oK3G#c0zk_%%5m(+p{EvvYZhjk~R>IkmfZUJx8-$sND=mn>Mwp4X zuNm=|33CfZ3)ib&Q7_RIJ@6T=r2m$u)89F0;H%`%BhKzcobHjRgdXs3Tcyf9SiK?L z(n^1Arn6I90$Sx$xWzv!^judKcBgknHI}ufo@8lU2EXVjNK=p>g+4urJ_R$b*C9pJ z9k5SY;Ns74;t{=>)*eb2?9XOek0@s3^D1l?Z;^!0t1#D||3F+cO8PQURyt#i%tJR* zi+UoKiM#J?p9nH658CgG{=9Z2@fUHVQBk%x8TPDN(!r(=i7gotyA>A6|G=XBwvAd_ zl!Y?&PcX|^xd?w(1iF{fWo3>K#=6ia(Mdil@;o8>%bNedX;NFAzd2RDmY4pk{=Xk1 zU9EuLRzPnnHM{>zDI-E>!p?#4)K$(p@@kyWPNmVPEF}eT7W7awWU&t~!8>zOsTCCe%#b~^y(Uf{Ahr~Lm7JvowkrlH6LxFcl z)(7&%skP~Pa(#|$4%rM^L!dPX+7tLK!dhx#-uf`YAv}*z8f*{Q8nRI|$Dz3lt>Nv) zLpF)#J1Jo*p{PNUlRUqF+IH;EXw_-h%dKEG{7sRH{7lsQUU0)7=*8ZWvEj}1ZV+Ix zM(7PX&MhLJKRiDryaDgQbn8!l^2Ke~zoXHOZcRwYL2(r|z@q^!trp*mx13*(zk|&@ z6-SeQ$;q=S9j!;Ht&M4+?|9Se4g}KcKE^J6LO<%7zpW)(*#@ZV(Z*?y$0LQ&oVq_Y zGWRkq?FpP*fzLqP&O*IRz4Ay$3F7%KfxX!%Vc&uo|I@FYMavFa{gHS)qprSrfp)34 z)|XZ%ZN#3|#Nw2e z@9D9~BLR&T4~)hR*K?g%z1f&EKxq{6Y^ZxG$HpBa@UvY!m;6;)HKD&WU^9N%n}*-t z^s;@{FPfkmq-Ufnq;oXJl|jeIuT8Gu(>O@up{t3;VDccx^N|MgUaVo#SbU(FxS;vE zjrR(hJQ_S;&hEDvb+J*n#iX_*=itZzUa;;Kz{;YDW5Q1J>!vffW~^xmj!>PK?_*q9Q=Y;@O4#e4CgEN zAgwJV$|UKI)c-%$-UK{~D(f4+RlQX@TXzy5gb=C|0v!kt79qINS!g=RAVF|M0qr1Y z$7SpUbpp6FiyB48fanAqG`Ni5GLk4WMnwW{C^~N%aYi;R=AAJDj?-aDb$6Ej|IV%M z5O`<4|Mz{*mps+C>fC)h_uO;OIX5vH2a19St>^7&01Whh`~OY(M(i>Kthl{{Xe277 zqra31Ay~da`6l?U!U^S7=#{^Quf*?n;i){VseL-&(*ZdUF2wJ_a6vSU%XqvoxcP}V zzdFuG6$AMpv0+@f*qGv3olYZgXLuZb{}djqFgc&sWh{O{gVhzZY9o-&a7LrnqX5&| zU?jeXXGio`LGuW_rMC+52taA(4u?A&FmkDd>BLWS1tx5&#`z=a82Dvq2u|^d;v&jC z5qVPIJ2GKC$2+3GPv1n}9m7NCp469wOxRR5Kw@{vcniUW8>YjHiKVTXtojl{{hXMh_a#LlJf;)@d7di2E^)X~mZA z83Z4qyz1{s##>CnAgOHsJ-pT!{op^|;hU9I9#@ux5F+kJG=bZ10Jk6aJHtvkV^mif z%T$+5JPJCmkzh&1DlqoArW0UxygZbIQplC^`HMO&a6v_uSz^PQU_l^hd zNh&u-^IsWsHA^Ugk(Xe3uO8QifRmRK^jQ?}orJnn|GFEex&Vrq-d6 zQTR5;JMW8u7lTwrSl7Ufuhc>;@J3%6TA%JJ+lsMCXP`PzvULBUP)8DpRcAl5h=7n> zqX=H0Zac$m(WGlTV)u_|k9OoueNOZIC%Due)J|`~y&C&;LttZw_%e)nV2S)&*aNr5^X)nZVnid+&6d#{td* zFfe`ZDE_abvhxe@8NfH5^XN|E9B%~Yn2n@X+Ufk-c^Ws};PDz;Ee)s2ERB+PGh{Di zXI18xEgfa%`S=1AU(hVt?{3%It3kup`d>NmolEai%0y>MeSNx={T=X`G2rd{7I%6| zWTVJ;xa^y9&F@?8x1`U{{o3L84VQ&Dgf|H{xEyc^^{n2J`FTaU?|`d#KDY+;f*E(a zaA>;k)9BqUy4OF)4&Wo)5b<$D2RW17pz0~!`-rz2VRVgcXH9e`Of=rRF<8+B*xMY& zl7>3X^>Nq}4E4QLRzLsR6N3CYT7d0o#we0oO)|gN@2OJ2iGOCVYl|cP@au%V8$h!I z_oTD!2>WDkDEmET2Jx6P*h{XLDsIfwV_Xq00a9nZd3Elyk681FI{;j30*$s6`PhLM zWL&Ca_in-6Hd;$RiIxUW0op^RYzhhGj`t;RhW}F%t15flmfO0(m>Od+bx{J=)$G2Bg+3jPF zgZe_5r}}Aknrt6>%w9*~s75*=4|TxKzlM#LlsjDe7Hj2OggojpA8jEH!J~AGr?L!h z*CFNagY~N+?GT@=RPof~k1ye=oBWI6&gLOJJOq;$;_HU;>oH@mbK$1kK8jCeV0Q7i z#*d|P7PQacDdiv6^1iA}z~1A1_@tthXCY3ZOD-+J*kdHsZW9}3xSZuW&m^Slz}#Kb zovaif#1#WVOmkh05P8uM72QO6%cVIOr@HME2ZS5vnv8J6F>Xg-G_LBQ(Kx&u_^I9+ z9fiP47@5(pqEvkO_!mpEl*QG5o>@5`Sh}7Khut<`s`6kntyjz*e>}cS8XAY*ndmeI zcK4Wg{yKyKuU~%W2h3@?`G+Rp5n8KW#N)zw`Z~Bif`L|f0&YDXTBnHqj?w2tYZ1Nv zG9D)oBhgw!n}3S;Kf;aC{+3->Phh9c!9cUQX(f@G`_w;h4u(cE5{H#~LtEL1t~0vy zf!00)e%tzJogo}bwv>WhF$zwRt!F}%=3>$utH57P991otr_?7MY@wM&B_!|FF zMZd$iJ)~Y2UhNF2<3X{An{aEMfSwapHyuA|%rOK~dq~r2kzbJM^r0Scu2@IP?)M?K8^P}zRKAB@6Z7+7EhA zs?o`=nxMKTY;c<8XJCPwnO!K8_P)PH;v=6|2)WWTNN{GUkkTs;h04%L{7p{(7v6kbm>5_eONn?Y#D;_}9$HE2gV7AH_Fh4vA47ehQ+zqC~>j<`c>8CzJoY{|X1Exug7 zv+ADed+uGj4AOA7=F4~9{j1yhKjnP6>Q2pfmUlS~nG1;HaJF{PXA-?pO(35*PhV$ZI~Gi;5d{T@mr8VJf2J}xS1bZ!E?gZ^K^*_%KRM0TVNUW4|?& z#@;|VwuT^=#zz;)JpwaJ67C6{?u1oY_3a?|cMSI(OGGgl_}$}+<04m|oL9_x7KhiE2dM)TjY6mmYT>;(U=se%^PI08`#y_wRBMe1@Gs$G7IP(cab#H8Klvfff5hrPzRvH$}(Y71S=R1gEI`^ znXvj#*pf}-VPu3!;bH!GzU^k6f7f}(9Of5B;@mLbz;81m4Gye=bS}rwC1h9>#>qs# z6<6Hd*Uq(nptZ&A30^5WaNjp{r1W&dc8w8lmvsw)A$>w12i90s^~;Dp(8SN)78!7U z2dgns9AW)pCZNA8rENGj1T2;*8gT>8F6cs_q)LI);A~u3*qXl5-g+VAP$j+EQ!=#Lkr9h)Q5shg&+t;XUbzs9 zZZy|9CFfT|gwuoWg>G!xH$z0cjkCT|EF9f{hiqcR{Kr|hoi+>>a(6i<2h-f6P8ke2 z!L&-!IJY2`dCg_bz!l2Gpv94cr!-S(X((2YTBz;j&<(l`q?aAEH9eGtV6rA z{`=^i^|AZycNHH(4Ze!*6`zXU!%f=ZLtmeBs*H63Uwwspdu!OXP6=QCh-5p*LZeeJ zbg7}f*loaF>M!~gZ@n5>mPx;mt^C4!^Cq3pR?WcS#E*y|GK($xC(wUtQ44)beMD^=2Pg1@M*7 zJWkhp&DRKbmCi7D&hChpgMyZVW z_d?EW46J;C$57U#p6tV{z@O|uAKtvix!$<|VQz`|pal#Gov=C3rB+0YutQJ*_`yEN zB4>*gUFyOmwfzn8(*;uOe8S!}B6h&W1VZKr#Rb{C&L>Tv!O{SE9Q z8_O|*4=$BWiUDu1=#SM0cdMVVKu5^;^Hk=Wu}Fk|4fK7rv6)-9DI_*+3hCVPiaB9l zx4X{W+Jv2=2c|Q)BaBIQ@W1^SyO$GxgW!>&+de# z&r=q<2T)F}(~Zsa&#PP5QsJ$D+*Yz~J=~AZ>QXDbPuH#Yt*<`>t48{q^}f^<@!oj& zh^YtQQpk8vuF$r{sqN#)^Ko}Muq*ZCYOYbV1#KFc#zrnz=p5=QzX3SM<meh0?K7nNp)+q>Oiq<0w52mHMGty1;d#V<`}Z zm_PHeqlIYOzzaI(dPu!JjazAsuCDn@*Rc#T2X{Z-i(-0$q&^$755C1|uXCa-{|N4t?^ z8b|4J3lwSGkRz}Iu^1AEo4uLY9?K#+p{B2$u`h=X6sHapC-FD+4YW$>8YnHu$2Jx= z>$VH{k}9bc<^^>Md&a}(RUq@z7Ml5%abF%~dp_avRrMJqEo>}1!g9WCu>gNrc*zo6 zLPLTJI0!opFbVLR$eQq*#1#A{Gq*<%NigX8K?APBJ@IopxXM@&Ii4{2oK4sLSq1Bt#)D*1pW!#ctfDiAVY%40g1J_ z*iC3ST{q6;x788VrsFL^GVpdM*#e?EP&$-~TxYYdjtF3bWByN<)gmPw0P!yNve z$KT5o0r8xQqwC!Q)=*5cJ6_gsHQcb9HC(R13NheQ;d%j|1h~(^8pd-OA6Ky;4(DDbo0B{XQ zvPQ`GqFvYFk$(7kvO78-sExL4j>F#JabSux=uS`a=PAR=O<$N^H+_Ut*&RurC$$YJ zPndKNYwAYNS0@dkenXl|4|qZWMooEozmF&i8xmateA3}#!dVS?irMiPQ>|f1!A_>$ z1imD0*rf5vX?QbcH1=O86P1JJCzXq6()l5{lx#1cGmivar?}(_= zd)7GL!z#)AvlJuF%Rg-~7(#Yn37y*>%pQeW8whyi}y=5}mmk($0uW!kmn?<9k7@5QJ#h1$BbuKk$8@vYuI|wH+E-YlHdXfLqzD;)0 zc@_E?{8~+mdIYBxt@52}Y#e+eI z6uP&qbgwkz*vcd7;_lT>X}f+$R=I{(Z1Bmf7+S8XiO}vdE5v_rWVS)BhSJ!LG`5{) zal{KrJifhCK%MD4S-(SCRNw_`!!5`fuYlq)jF?X#JtWBIItb6w+D;sE3di=G0=}d+ zv*4ljL)~W4Y)W;%?<#OM%<{Apdci;MptAyM55nmW&lDKp z9>PIHtC?~W%iSL9?e()XyuK;KqN{HY$Mi(23(&Em_4q7@bQ|nW?`}$y;^)-qPM7G6 zvkj-$>K3jvz|~pZbxS;SM-M0*j{B)UGzyYdA}z-EL04M>kMn)76mPoJr$Zw43L;CY z=vIG&9S_UZT3(_)aThvCV=kgD3mKd*K4x^~IX}9iz}Yy9XilmdD2ExgWbI_bJGIPGmKYr>ZZ8*3z6XyP~;|3axQw*NLZ#MLVshYz)r4 z>u1rrn~8f(`C4N$Y%pRBn6Ohf;4Df=`3kpNqTg#IaDiCEaMwbo^UU^?x#-8tHaq%$ zh$8%tm=eVlzXGR^Vp|Z$?7R@ewkiQVY)22irBZ>P6H_al5>@VW97W7OA|wu?Y} zngWf7lnA_3&~7}Y9~a+l7?;*=9CxKZ6SQbAKw}bWq z1l7jFX%0OLt(Q&?)hINDLw^MH2iWAekj5bnKL+@b4nh95L#`{}a)w`b5PjH=umZRd zq_c}NbLc=D^7Y_8(Oqb;pt4(NyqNzKQE%_j)-Kq2cN%bK8_E~ms|>LIbW(cEkRR8- zS3!$5fDY`5S$-P0TZyP;y;=>mvHI`1WH_Vjr7?GbOEwsMGQFRyL`87_f|kO?=~fV@ z;1d2>M0NL(WlX}v7xTv=YBhW=aMoh`E<-+X*0g+nLp+25WzaZv5j80i%SnrMp=5@r z53}W$TfKPP10I~~jRlk**8e8h#*|xq!2W>JBiQorn}_pbaz{g>f39~_*#^+iYw%c| zITc@@jLX@JM+P+CBA2hh?{K`2Lx^#fVP$c5SZ^6xR(8i+*m4+(H2R-13HO~bThS8V z?F>3Z%r+Rl;6c|7g6o|{=bLnv8IvA?8DAyg=&7A+!3|2w&e&nzeqMd6 zduy<^DP#Mrm0N>epK%5CG27#Ft)3|ybb*?Gz_r>*+y((Qe1$ld^SpXx--_~;;9!Zu zd38oFakBJ*f(Z33`Ht(WEwAPLt@CODd?n83I(|~hIj?5p+bFQ?JNOysc~!=@C{%-s zeO_hYcrozYM1;EwTrWLRxA!dpUt0pFeCPRd4<#I>x2E&waKi`7UQ|K+v-9fpJ(P2t z!m@9OLjJ`e-pof@SoZuV?AE@Y562_S-01gl9)?aiMgRx1?20J-+PF3kzUxKyw-Uo*J7lY?{!|8+;zmLyb9Q(EwMbW zoX~Z|plt6<=Ov)hzT26Oa2Y$wR@~4`zjiLYvKRaQ4KP zsYkRgY0_K#g{U zIfpTMaWJjB*qFk4c61(`y@WX!_<|mcF$R-^Ed9I#lKu|Hu5r+~`#sjSEz$LD!%kY4 zzINK^bj5z9pLYCnLTS(_G+?By46~d$=X|y19T~2WdUs@Na17|oJj<2YVz+=dJ65Es zC3rV)4Q5&B9F2S!-ZEo8@vnoDKd*N8_`oAESDaTPI9<^P9)%PXjW+BZK$(d+5wvoO z^%j(m&NG1S7X|UiyrOgSm(HY9L=Fkum zZ~s@({za`&(1?zLVcj(DOc*Q9C?thL>M~6&TOpIPJD6sXO5ZI$j#JB_mK$)wHPix_ zT%SI$M-LNU$ef}~EwcvAmdnb8ZZU9PT@Ow*jji+QkB~!1bdpXiIHqWqAvpi6oY`?K zgE&x#H-^U>9gTN)f4ndMLp-#sjFz?RJuO)2{vx!kyzg{z>PM%=Y~i$+vNf1)ah!Q6 z=Y|sT^j^z()!CooOFTuEofNHYF|RGnL49CiuL))K_K+1tje2FQ(*9skVd{fLG(LQD z1x90p`hj%KSl#wkk~b0TR)3eOgoC()2RlFyoomraR#3gMH;6lQ1e@dxs`qf&!7B8h z8xJlBbR^^Sw7xj*a1zIo2H?d64QF~B8PM>BU;JTMEjS*l7f!3t=skK+V4i9i*+;b%Dp!n+AP*88sagB5o6O^f0zG z+zVMY@FODXpTSW#VrTLNPQKm%_WcCdS1$GLb`R_6V9bT^(Ah({_qd!2gHHS?K3AN; z`}O^IoM!jm^<;C|=wuHzg><$NuGQ|nZtU5rimFyuQTdn+yG79TPX={3-_~1<*y)Lk zY9I=!sKMJ2+WSf1PGH}N5N15_7TpH@25|j%kWHLXzf{VcW3lf!Xk~Ng*93C*bn^14pw__*7-=$WZKhVh{ z`iA&M-#I_%l`PuK{*k1QxAo+AY2)2Ci%R{4UoERNWgx2G_!2?VYfUAt^;l^ zdeQ}~Hxl0rJJdq7Roo68avaL=ieo8z#K{yMV8X@t8xGUpVlFyZZ2 z5z;D=@K#N4d`)cOC+bN&g_1#q(h+xp}{ zh*_|QeyU7R=p38qh|%!b1fQT#mRaxG8Pp3>snBp<{S5I$VJ-4A3M9P`{g;E+?Q35?qj2A;A$u5{MlO%9Y;$SJ( zfb-Txv*~x?Y*427B}#1`(X}=KXM41AEXKJr<*(63f8(h$xuWd&Negm5g6||@R#|g! z67pVvuq?a0;+(n*=Yz*jCLzT22$3LMjWj1(rQzq*%Xk}IjyBJ?Z3q@vS)OoQv@y`d zb2I9(5>G`M$_+!3E5-uKE)c>oW|o-W}H`tg?uRG z6{ztBtUa`0$_Af6XB2fnhF#8`2yuG4O}bP*|%F1FwaKlx4vEeTW4< z=*3;Py+|!k5`i>k;GG~FnWBKRE~J7J&H_L7;a#*;WRz~GqqmIGO2|rm)T5n@p8^Mq z1^xmXxN(q+!HmHC^MIGI;X@|P$AOIp&;5Ar1Z*ev)l}}xU4jg&V2~`QIcc$FV6J@? zLOR@vZan7lVAscmUFt{uFe_kI*SmnV_QQ05CAi)I?5%#78!(fr39wiCVdDT3U7G-V zE|j_Z@3H(FSdQqlz;8Hm{|!PDM$k$WZ%gO-ue}IrwWaV9)LjJCL0gB)aMwjpH*gA- zV#!6&aW<_S*GJ1i>x(X1u%)_kJYDK{VS2YfZ}Ap<{gr6J>S7^sIdLg&}uG6bFrIq018(ICgq$2k@R zR)PhL2mDW-IE-&}DRAJg{fCrqqL`=HKLa_9>d~y#vH;!iUDzIPyBe#*3*8pm47ksA zAHaC53++c7vryQ&A73?Sy^r~*idPbmf}sa1liub`MEJGcZ3vMWg3O<%u=zt;#jDes zKOlKESPx{jKSI_m&FTvdvNi=}JXzK&Pc#FoW(f=4e+#ZG6u$o^@-hl?t6+Nz<6hrm zR3;&pgWZDjRTss0rF>&BYvRVBY}=CIZ+Wr21#hoZw5PMc&)v^cT2@LYF5@|us1%%t zKVeenTPj`M@>|50t;3XOE=pkoPvIG!!dKnD8IZzyULuNF&tpP9J#Z%YaI`IOM$TJd zEubAitt}qvzR(uE;RoRJZ18@xg131Uetn+G=KEX?p}{sP<$csTIqN+4xth>2-v7}u zZz;BAKpfhi zuyI3=II*()#LCNvf_}MkD`TfeTI{7livum>w93%1eYqcY1&0k*rt>&gA&%4^M`)SM zeNFu_gq8^$l8W4ph6U$Xl+b0h;Oh{i+h7?HEio@l7I9qGJd6xAoYP-(vi|cUNG~yv z9h6b$I?}#EdoO5)y}nTC#GN6hjp9MZ-Sdbi!?kl3Rw1l^Hdu!f15(g}luoij%n-d_ z;_aFhCV%kLwULf^h0SLCGFXkGT>{Bp@(?_oAn+^U&=_7NTssQ*RZ77^aJ+m3;atnE zrO4$+oE6c$to7fgxOuKLFYoftQx?(46B=7@xbpd>}d2l^y>kDi1;2N~dwP>d- zYvq8EIvZiLh1JEW$15@e2TBl^=0MR!bKojI2d?HZD#Di! zNO>AB4b6cmJmydZ7C{4dM|`}M)&m!e=Pd*|YqZb={I;Qmpt0%Mj}{V@a=JqkEjddW z*Cx@4Q7)q7HOFs-{5dsfG8%`^I4ljLbwDi`CN}t3_pTuL_88Qz@ z+0zIQQ#d>PF{|-JEGz_}L?}Wv~wmYHOXLIs7 zTZ*u0pya0ei}5x{*#3SITIjnz!FDzL2U)Ec!OKI?aV;)tnGVQcYbGGKgYP~J?yaG6 z+}`JMo>QO4Zuy-06?jJH)JB|Vv+M#;8*g?KjdM=j+aox~xY~m0)&#_=2o=SRLRy*V zNov<=$Un_5@;=!c%t0@Bnr--nt=MMDZ89i|8T#RX6jjTh>$UoiR!A%EB*V?m_TjLs zl%)()te2#=B?yf@qy}Az{?rn9YP9Dbn3|TRCW}JtO7sQoE2vE^yGSQcYr#A}Q|t<1 zv>$`C8}v0Bc)6Datw?cyGv(*2-rkIzzGrncB(rBFD|#McevtNvj%MhUAcWjZyTsMi zv^yEtpOjx*e{N0n0!MU=p%562 zlug(VnE00*F1U_T{Gj;!QNbo6>yuWO~T_u6YWrUlk7X;4J35S%ESf52jh9_PVvkRZ^*K9K>uKfPrtMqrMW+nbkh`+!RaeQ4QM zz@aqua_GLOKxbe6MR?NAb8HVL%ylZc2sIreG|@j9bsrBtz=y_(&dJE}jlQ8a;u&o3 zOH{~DCO_uP)O@%04d=d_sa%#cC>HKMWz_Q|AN9H{0k z_CuJ$Q~9>_>Cqoo&ed9*K^EnHj(cf+%l=9nMuGvCiH<37%0z4Jq^(XB@cHFu)t|vUdUWW$2Ya& z;y$9tU>Vt#jW$1N(P0FQ;BT}}o@7n9qtLs17(pB{oSN2-dIuUcJ8+2q5I99NkKaf8 zIN<)Nx4>2e_wC+63Ja{`;qoXPxJtfg*jJ)qx51^bTY1^op8Xx#+@N}8wo(ay837*w z?zIuRnQBCYU?Nh30l-uGXlf7Axgn#rC*KVb6Uyr-5^%0K#Wo$O|EgD~r0}b(q!oTv?zb%~=9i?r(;1l| z907iqk_7)GEpBGaKMx!<7D()!h%&N39BO)@{9Ab+5lvU%FHkn)%RJYCn$-3JBcjv^ zn0wSCKlc;?iaTinR|DF{XC1Zr-+C?sd?Da7gvZfl+14yR!~W94Y>(jk;@#6BWi@i3 z*=^yo8}kJ-7;8}fEPk&?o8y1%(dPJg9wIi!U+>Z8_^Um4V}9C&IQy>;PDK905b7b6 zbRtT$895Vw?3tchqhXeEX*Wa4i2Ui!c?)i0F53k7KiqQ@^^~QkYt54S^a${LrBcd$ z>Uyr{KE++{h~(qyD~bBt(KDC(lyvE@C7&z$rbc~k>M7?wGtb-#4 zYwO8Jn_fOwqpA}9!}&@$xQBZ2sUFZ$(H>0fNl->`KZ*OThTn{+U!#RDiSCCUVMKGn=hFc^A-2P+5uP>CyM~|n~fV^h)J<}S87PnaA;pYj( z;rH$kB(b5bLjKeGFxufx##ua#Kf*7$;^W?xWRoxRx?jI-w8*NlC-zDjnURd0%j z;0_W!iZi^jv#KBG9k27V+_UNpT>qdFp(;4%jCh@A)oT#qC4`WKv*>l=&7D#RB@nx=#_w;;_|qoF*JbuBith_<_-`$UTl?seUEaNKSR3eNZjq8?{=XMlhE zOa4uJ#+ls{&AD)kx;tA&!M&`oNO|#nYTWF=0oX%VFa%)1qa5!Nk`YoRwG>$Z(C*$)C?Fsq1 zb_p_d3BZnmjdtb*R>Jz%^0(nA$vp7E9j6Qy2eeoUOWInfOv6#81K}+AmZB~=9y_In ze?8OLgi~WsA1zcCLcJRvg;3Bp3#h_X7-0oM(Wy3A3Zhh~rM5$}BO;8z+e_hzW*P1a z;m#Ht+~>k1H++MW*8FF};}Ms38diTP(u+fSeEr}pREiMm!bEEnT1Vpj!EoHTB)<*g z_a~OicmASnD&V!@rMAoA{wkcL#Ep}%XCdfq;fFZ%matCIamYn?xJXe4@QO#iy_=a3%s;BJeN1=H2%n!_r!5b3#Wk@I+)RpVPD=6hj_~ zu*jV#F|7p_td+DD{1~FOpbF5d0ijjk`w*=H3jmoR&`O_e9SKf_*80i*^Bn7Z6{579 z2s4>5el)Fpp(I7+{=2#VR7zuje+%rHvOQ$$gE%HSlyGK5hjc7Gv|h*R3jA^NTF7Se zd+|21N@H?i5^jLK5??a#6`5Xv=i79yMPQ3bh#E-V`G2klT9!fMa=?g!3uGv>LD&-1Y%8bL3Iw0W-M z^V}ACL%AL`8oBzyY@gRZ+mlh7iNJ__zHdmy*EDMyehaOb_q?vtd0nsk-tK9A1z zEBM>=i)PpYls-1YbPY7az79_8pJ87G2{SmsfdOW)CN~zH!jZ$NI6kj+96Nk~^ZE!* zVOStOiX9%0`Vv-nGe}rr6ns^Tv4L1Y$FaiJpoR-J2Q^&qOfWVhY5xye4>MA0vHGAk zBi9AB8QFvVVUW>`)cos$+Kj}VKNx$ve~i39^NDC>-?|5ji1sGA3Y-MtBzL7(-_6b! zV3b{kT`bA$lFXsWK+=OcNb$}&_iQD@`QvmaYe+|^*ZQajKSGXsq#{nQ6a@pE=DjM| z#Oc`S!8|9;+|PPrqh61%FM4UzKNIE>2diV_p6o}&XzIb>Qw&nVd@cR>5{=8y?KHDSj0C4@7mZmC4~^7DQ=r_Q`+51imSr+(cxGvE`<*!8l&E7$`Y zm5Gau{OkF!wgc|sJK%HbhkS4GKli_X;rm~bKcH5+2K$=`P9fuDk}asfmj(Rba-6Q0 zC0I^{f*SxndC!kLTQ`k)IT3IQ4bqyw^1pZe;zn*N+lI0lK&w71Exd@9e zGZ3;@J=)FeKebOq8`)S1ID!o!L577V3v7|r^{7k3r7crk&^h3@J=kCYouK8ta2xVC zjBbD^Y9Zb29`)+pQEfNL3SGq?x244c7c z=}E;1_#D{#whqSL!~XAMJS0O$@^$;+{sB)L9+J5u`MUe@kj*Kw`E(5L3LcWpdl64N zo*xm8?(XtM&vta9adHK2y&fi#l3DD{(*Gv+zk$ApT6fZO>rO($SV->(I~=$Lx?6o1 zI_5)~Nr$axH8dPy)kCTwuGfBdL=_-WTVE!O0@}Swh?BHh==HqfjL8kzz?vNXtOa$c74qNJI!w zpge?x5UJ5{!uF7QuA4?1Nqvw$)J&AaiKi6L$Drz>GBPsP=yK%p5g5n7|3bQE1}^0t zx`q+BgGG;Dl9)+jSrx)-;tp^tG2%MHf}DvFNe?V}!Pf59ke==LqW?YhZuFxE7PH(W zjSPL3z&G90v&Xur_q8$L$fO$(B$PbawdVF@SHmpgFFL??OvHFVn{rtk>h~s;_eVU` z*QB>kZA$iEXe|7MhvcxyUJdp42+VJ?B=#gYT&cW90t5FF-y%c$cL)uTb-6=qcr%#b zsKz}~RFnI{R7#v71lDweBNup#etAhq@(ff5NiE!HDZlXq(cGH-kIze*)DQU7AvG{b~p$y$+5%N5wpS3Bpz(U+DedhvpPCW)J zE0XTfGHDxq2S zuvTbw;3seyfg5p8u>oz( zax@Mi-AGJ5Ff2R}Ivr4If6GPCB0#DA4S)(rK_r_{{H9}S|8U5gxd3g;YPMC89E#|K z7AP!!M6kQM1M`^H%b`)o*vJxP#5lJfczQT5t7CFm-0=Q-IH(>ITo$b!j{Gvqg?c!& zdgT3wdi*K$@9Oc!MbKD1wgLJ->+$S=tVesF>5_VU)+gcq_K5l&-jgir@nvWL{(w%A)Bx@y;4aJ#v4QDf1qWZ(he#HR zX6nxF&T~}CKj3x)RecteN0*AT57;EB%<58K4i4rxh~G&KIX7t++cP>^!rTERWPB85 z4=5olOS%QyhVV9M7x@C2<;6kSg3*jI23Tivcy%XkEroSj_XwRo)itsZ6adb5sBdMP zn7uLl;+dB4nlsiCAuvKjIu6Of?BBObu1tiKX@`<&D9glM+iZ`H!!+r$TgxO!SxOi=bcO>gv1`1=LOdBs(;ydWf}a6>hFm#;CsYE3uwFX6gg z^|xF$uveW67^D^5#cr{7FYpniP53m)DY*=u+-BKRkYPvu_S)PkL6&QAV~Lx2z^@K^ zcT>87T?sf}VA(^ine3VBnOHrs)##Zz%;-)hyjGR1FD4{A@iFd|TPj4OM)O@v=dSwvBEM;R)z#epf=Y_MEk#u&=TD`j?Y7=DQ zu>yJ^vtF$Kmchmp&YaywTD<{d!v^zj2CKG!*P5ZbX&`ttRy+5PxYg)Kem;$r2lj$U z+7kbu+-Svd^Yb&d688MsVcnU>7b!#l@|=6xI<)qr^S*bZ~gDW;WCO79*DCv$z+;yW8!N(Nl6Q(Q|UE>?E!1p^+SgXaFi>vOl64 zV9$cqcjnm+3lKE=3?8la&S9|7gKwiphHYm3!HF0r5#S7+qP>|TXVq`P5B!4HpY|jM z>_0#0A!!>n>N1zfqerT&d3ftt^Ls*Lv}DQ^_xron1^^T_Het1!Atp+W{}zbmVB%4p}vYL<_C zYxbN~Z$V9e*FSeKXRzwYe4X6y-V~h9Aph*ome=8pq;tt7{N;u`8fpHck47PsJA1s) zK56{5xDjXPdEd>c{#S07s~xSf$AJ}AVs>BC?Y_*WB|{YsX`ycizO9N}UC2Z2ZF%wb zN`iPzJPdZbLJXoj>B#c6C=W~TYh{zMhF>UK3NKR-X6s%5O=Hr%Xsq0AYe z@JQB5Zdly2FXgsS=yJN%<* zpL2M(Aq1tbRFnPm`~7WYGUUYHh{TgAl<;zR`RLF;2 z3X6u1rSj@&ADd(oPPZ{F9okVFPdki|p}RCDQhV-F*#B>8CRR`iT~~MJi7xfl{}7wX zzTi?nVvK>HR)2= zB`N798B}NX~}f^n#SJ zzzJjX{q-CtB>T;`TVNAbVhOl&Q>spHm4FkZC2@)bTp%rh#rE6XaOFDk-~R;7`Tgq_ zv`QQw`4CHS(>u}d^iKFk?6=-Rc7ld;4e#@63nZ;ycz>+o$#lIvu9+mJ$@iPoWXu;$%N)-^Ud8*ye7|0jDL12!uo zJ05y_U1jSm(EW1)xpBpVoMnbiJ3FgZb|)!z=;6dc@`?OL!>_2U2q#=6-GYMA@d9+q zo5r`=Z>PPOWUHzIR{@rWe&pYJe47<;xn?jhZI$kf}mxedy@;NFUU zoSn_x<~BFlVaFMLpgZA4A3zG=1gKNChxpMH-c}W-5La49;j3&_v=eQEJERq9RV6CI z1kpcT+*TziV)PB?4LAcL7}CNim#RJzl%UPg*TJ$S8|fq-3e)e$VXZw3T)T#KIs^fB zj#c$l&`ghYQ2Wt5Xo7A7b1_Gg33k}Q{LyHfvuI;IT1>^cuA`OS&O$!e4$A3;AgxYk zfxiW;PTZyt-)|0v-ML)cEa`iH3f6p3*N#ciRUfMz-=mF>?KK@^2kteadoIn0Uj|tqvMe;w57|gET z9R8BqMIznHSBK7;sXrE(ARZGiOM6z64m0sjo@W{lB}!wugxg8#O#+w7yL-56U9sV7 z`V|j~vfVo#Hw6=9C_%o(Ucj3RnhTJ_^ecWV0Fnu7DHJA^Lnu}%c2WePU-4TVAZ8_* zLy|Z|4+tnP`O^+T{+QbU7IlS$8}ZT}~e-E%&h>bQoW{vO z=FO*=8Fa3G)-~S;GdDCjE1iSC`Jxj76beF(EO}9|OYO|Y8k3)EgI%4rlVS<+@b5kq zFP!T*(8<_$9VXm18Z?>Ovz?P+?XS$)sm|qA$-1AvtMwU6qcO}t-*;%!`F94b%ZS=;}n)}K5EWp zIcI1rbDKoTtsh)#IG_+xIlmC_r341njv@=)^t-(!9(U%Mk3Nz#@gs?7PDOUXjbz|(- z_PYZUbOm)yodsgtn8Du~wv+}$y?A7>KQcW%m==EdliIkeiQ`5zbjr-Pg`ca(-`xT$1-4c0mRd0*OnnH2k0dwhH9 zu?6;Dx5pi$JM?DSyV{-hbM3S28UC#&(v@56m$fgouV`O}ed04Gy!Peo(y`lMpR*bk z_kTqt#O(sRl;!sP_InY#&VEn(jm{yP8)n^=dGCpj&x)0zJq|Z)CAJ?9LKh5fq8qm- z#ocy-zE2I=dy-w-)j{uxzB3((-ayCDpne!QuNLBA3+$9rkaY@b`Z|r6Diiup5Dz6P z(3KYIovp>mM|?AbM>B$wh2@=tES3geT^x?Wy8MR5g-%clCL8$aL$*NQD{L=irzL|) znXTlVNK`U{LcCUDtVNP~a3RiiDP-!2Vg;jcBkFK1ay5%%q;{0!fNsp3Q$N+1+Y^;M z&6-#!aVzE)KY(qT0=#55%G@5PHDH8wIN+ymm@KWIv z0OgCjq&x;?1j?WvBlr^nkp!e7Wt;5ZcwujcJ-0Ss(ak$$)*0H96i2iqlClW%%-CMQ zzscT^nBCx{uo4ez_LINhUt%(RqlJOyzw}Vn0#G1Rnsg0G+r@@NWolEXW1iFPWLrAb zfAp<$>KfN95*r;^umkBud=~JFjm8~P2J4i~Zj<=U$aB6axQTM~_0WHL^)!rJ6Ge0y znqCct#-dV3hM_^x84ppv4B27;)_gl;C}pFKim?4gXWL?JtUZ)DYi8F`MVIi+g>Ww* zoL(uAW8;x+c4dLjmUsRbD1=6F^Np|+UzRCu&{6=-5^xiex%1ev6O6^#p~*UN(&Q zObI^6frI@PC$6x;O`(oZC{edD={f6WmVG>!(8QkBZ?v|q z$YiGl^PkWk`a^BdRp#*ykst^sI~b&7^_zuK z{f5_0W7aE0nMmRI<4*l%M+V)iLN&p?W+we1p|NtNaP+I7-bYwt4ig&_JLi~ocCtCS z?PGE0mDo5ZAcAR;aKurJn}7f@(L8JHR3GXsm?$=wg2Hf6rNVY#fHTLiGTZ;>j^98OH_{5`$OKm!vj|$Z{_*`| zIyP#LA2TRJ`Z3vEnX%fOI~JP{um3O(Lv<`384vNmh#QxMT~@tbf5@OrcgpfkVC|(@ zp>N1$X<+q*Fb&TAI^mmw(M*v?BlI^0r3g6k;?Np3mIuxo$;{H}N~DO+{RcUp2?lT{ z=@_i?9{A;l1g!D&wx^qHeUgQ+6I|Av!Zj6l9wWaUz3@w^MlLLn8qz5doS^X?smABw zR!`HMmht-b^zpiOc|7bN(vD$|0k~rw(uvT%?gh4I66h5w(fp9HGn4s@b52=2g4}l6 zZfR?waF;oS(Z5n&>C~Ikg66hYI(6h)Ug;Fcl|e0#TkuSGSJ>E{aU;<+L;Y^&_rZ6X zux>Oxe#(^aeQ-P8MN0-`1~P)IV9u$(X3Pl;i#K=2haW#R%M9r&Q;L#4-g5jxDwgCp z|Mx*J;w7{p9mK^w13_KEE2oVVo~6O^=i{dm%=)0AiD_lPw_wINh}Q?>0psNZOax4f z!g$#M(*dUAF#GVf7K3x<%-#@_leqTYlK68c_E|r}POD zWIh6`JJqIW+z-3QBd+fFoO3=4wyCANOJD(AnLK_!5BK}dG{S4sMu!vBD~n@sM}@U~ zo4PHCn|M5JytL=8%((VXJEt%K`pcMurA@_!fa#qdl+YNXJb!mDtH1K^(;g(cEfRq( z@?G(DX?3?abg-#AA8v_vecdLwYrO~R4#EA%8^0oL1^jC&R?LT6QnP-=Cb(;B4y-r? z_oJHlm1!&CUt6(qKHQSp^(!~QU0Zu#7?&%W((uE}dcx3Rf^ZsqDp0LI1awEg!;OuJ^erS^=r|%`@_7ikNltXbwPBTycXttedPbRulG=2r{e5pPFG|(>7$6Q zE_H5*HIf|y+N;;^JfltvolzeSG5KMfVLXi1DGBLMtl_5|+T9nrE4Ci^D|^gkXn4$J z#ACt(D}t~VVc4#!V?vLVJ?iSiIl1P3iPQaX)jB|)?p{|$?nmKCwl#3qchfEA*uCOc z!UBRj33|x3;y}nhdIWyc%8SacvEN_NdPY4K1nv#o-Fbrk+xjb=v!T3p-NTKCSvfaa^f8NKWWob-W z@hFqt6~R-hV-np}J{ztA*MT&PiYqUtYuZbf-FNfM>&hSu%l~A27cE^{i;G+e3Kzit znqS{BuVUE>?vF5Xk=NV*jXfy8|9m#wQap5@iwiE@PyZ=+1OF34yvQ+xW!Jo{^wNIp zFV$k5A~b=P*3!STF>9y7ln(ZwWdFmkH0lt6zcw{ubJnxHJEIkoBnf2gJW&3#cgtz=1-h5ey!)2CR8fDZ8U3NI=5Owc!f7QFVf9ISGg&6{x2B6iO^Eu6(UO@g zc^sl3R6?|5f+aT^%4o@nzQt=LTRt#UMt`WG{h@~NH}^&1wDK4&N&TS``CHRPq2i*x z#%RgnEh2{~%SQl5zuSxX(}xH22;`hRxR0`=P#2VW|n_Vj)qyt4_<&S4c~ ziF$B=%>g|ln%e`omB4(MWiJGES%i?wBEt@*C;@P>q=PJb9;k~vKo9p)T1ntg#lp>v zn7+N>Z|DAWzP#*gmH>L>Nuoord8KEM;56rDK$8ZN=cc&$#AIvgpdsca@2vQyo{og3 za7SWOup_Cdt0TGTT!*FUOoz28(2>&gb4O~^PaSDZr#gz}O`kLwsH5n*=@T!5TXM~m zX}}9`r%jsk6k9!mYS=`Xur%yQXj|g}-i|7LU6(1AE|4tjnm_vPkrb zEAU$*uEcMxxC+0^i|UF2EA|!xR$NmISaEHJ^V&tl%U9Q}0c?$zzSh*PUaK%~AEXiWpJlKN1ri?6%UA$p7JD&Q7-*VL_tyT-e( z?f~3me<2l~Oq$j_C`EWdkKSr28Gs%i)HsJq&dmM4j!|jB7 z0_pq{>FM-FDZ!F1Q{V7EK?KNzD|GNj?~*woG0BpWHYhz~*zhddNPsT|CB&QKB$H{9 z>qmk8yQiUD$CI8sdGhiz_#^i_{56gKkcJ4W6fh#E?CpP-i$CsvX9+nhF^eS~WEn7c z_!<;;+2|Bz-^=ngu`zpD!ME(Pr`Q!DSO%=9K*(|6ESdJq%k%a z?(fnWOM+XM#h4Lplbx|aa1WsY65$4}M0>+^%w-Hw*!C*MkQDCBVGI-u`}>QKxrAH! z5o7UiN1kJhYDac}Q{Xl|B7i9ddueD35pMo^ky+t75_OE)l-dH-Wy;f(8YGx1XU!_2 z-+9{aFY$iu>=G7J0VEDX;vav*z20gY=)}e3bsIVT&on_qWrdTkefpo1Zc4S2s3Yd&OVg z&in5P>*o2{Kjoh0g|{F0aC-SK7W`NHzh3JunLYX8nIZ9^$}3;kKKCWZQyaGyp8w#F zM{JhJ*@Istr2cgCZ%c=K{OW^OEnPfxxqJ1TW7%UG>YYEooA%vJ@kf&Iix0_008${`UHkG14>6 ztp(G}6Ou*_`~ItI9y*mWe8H5d$KF}^@_m1L;M(IirT)H^?REV3ia#ED^0wMdjXNKH z|C2fYd}Pb5*2hok`2Vz&wR7~S4V{A-<5s)#@YY+ z;@m9D-GTB&h1W0t?SXASUj1xUVzP37&6f>EHFMwXf2ba^`SQ_+Pmj$$xWhDg+?9hq zfAqD=S9CYTWi0#ay7o1BH)gHcepmi0>oz}`xVw3NrEbRqLzn!pW#(4Lqk~R=9{@`r)zvk>J^%l;Yws~R#c>?R&r{;`FrMnEXiJeUWOP-jKPpC%OGV1oG-3^@F_(;# z#&Q{H+SrV8Ns~)kCZ(Dv3|lE(@onfpS`dYn_rY_(!jNr zr)gn%dm}3wF18J^zOe7r$m-;nwc|eA47A#EWX$77J9nh`mY%88Qy89D(pqsK)HdJU zDA)N)?5@+7#->{OYd3A)|24t1-tore>p2?@?tH76DtLFrM^4wu&!wKuud(dTkN;CT zqUs@?8zgr`>>+Z$w=^5`wSx3IQXxuB`P*`#W~d<6N$c`=<}T7jC$w1*Z6eCDwC$#< z*xc&)3XRp)HvLn&HP$glKO1HQCblFcEA8WrP3+EBW@djePS!7<=cV#lr=wb`SUE+d zP<#4mY{Kjnlk}ZkN4Xt#SDO0=E6pQSO&VRLxzeG;C_GOswic+xj6${8Qlu7_7wg!G zx@KCfR1rY{0R#|0009ILKmY**5I_I{1Q0*~0R#|0009ILKmY**5I_I{1Q0*~0R#|0 z009ILKmY**5I_I{1Q0*~0R#|0009ILKmY**5I_I{1Q0*~0R#|0009ILKmY**5I_I{ z1Q0*~0R#|0009ILKmY**5I_I{1Q0*~0R#|0009ILKmY**5I_I{1Q0*~0R#|0009IL zKmY**5I_I{1Q0*~0R#|0009ILKmY**5I_I{1Q0*~0R#|0009ILKmY**5I_I{1Q0*~ z0R#|0009ILKmY**5I_I{1Q0*~0R#|0009ILKmY**5I_I{1Q0*~0R#|0009ILKmY** z5I_I{1Q0*~0R#|0009ILKmY**5csPCK>-W={^}0d*?%P28KiA|ZHG%*F2q1s}0tg_000IagfB*smP2fB2?VsoX literal 0 HcmV?d00001 diff --git a/stm32flash_src/firmware.bin b/stm32flash_src/firmware.bin new file mode 100755 index 0000000000000000000000000000000000000000..858717d5df1067327f81370aeffd34466c97f0df GIT binary patch literal 14776 zcmeHteRx#Wwf8aK+auja$?bH z-}jIE$9>-CCeLryIs0SnwfA0o?X}n0#7l&pIKor$gs)AQp!kd+U;Dc<9iNxmzFK}V z|G$!=2>+G*kk^$wC%gDfZA_M%EORBjGt39gZH7|YmfUvMmD0)|6ej8v+RtRk6f&iVWYIoT z5mEO?X?6K!fy^aD?T!-lg($WILjm)T?fn>Z0OeMu5Mc>CW7=`W+{Q`?t$UR{g@R=6 z$b+|{*46eVhtby*oM%YQ(?XwXS<=OTAmu?WnZrtRB{9sd&9c(!o0rYjxe^;pBeZ(t zGL|s6#g___78=yp;5?#*&T7OaNX_dFC8yULinoPjJB|cVmmedYZ-Oi$MTGe@;j!H* z5~HkXeM}Lg6q(AT)Kiz|N`lmJE>EOXf5+QOIvWgl+7cyJnkG@|{>#*jMqhTUghwQq zTIl0WPY1DrywGdx6=k2|H+MYmi1Q254uw*m9Y=1^I`B^FG%ai$Bla~JU-;>w37O*F zAe~d}gx~Jq+jyTd!|0V*d zEgTLwGO%UNr-i=IoEfY{19zf+G=^jQInsy9M7`SS{U&vCB1r&;|5=USP=We zCOey+0hAZ6b6q1fI?7bSy&o3HEMNcmcUhhzlpbHV7&h4)<=v`2ZNP7x_s~tz&Dp67&jHwp-jb=X- zOLdkkZ79$Oe33(6*d(Oo zn_<4px>Pu>*!TJ8LuD-Ja@LA;XwjyWsa(Qd_nyK6#Rq-Mne|4HBteg)t8=nCg*iF1 z5+Y2L*epTK4s)?^mGo{jfuhvjabi0eX1z($dm#IJVb*R_j4`djxq1&I0LoV>+0yaz z@jH%(`6dc10@XmNua8q!YA==7D<2P=TLj2A-gErCX-8c+PtZcYgH^zw4wPvjF*a9> z;%PgjurNwh%37tl71!^9@%73^1!jQyGicg`K5^Z{N{yVOkeoqZ3-l}iHlgF3N7OyD43f<-3kqhr)wwlSSek$)l(^`SB9yQ+U8 zzii|^50=>QWeH3n>Ut>ih5w_#--pfKE+1O0_Du^@ z>2_GDyCb2%6c>|M4*HP?e3t@W;CekH3sM+3pMrT~XNG~ZU8{01@-VE|N%)Y0*)zwBqc z&MOUgoga^bwZ$muv7WQQWndh8ejaoT#;X%$GnJUzQk1m(zYp`Z+Z~2(lQqtTBW97! z9bBMAaSL9n@!mR`@zSWP3Z;Nr%h?q zLT`_c!&t0@@@Sh-N6u^bg#Y*!1^q=D{!)+gL60$)bD7&36|R^oVi&Ipvt`QwwT>}A ztj|@AARGCd3|!K*Spx7z4gn4HB&vn}rgQvQL!F`2-@fUAy+aFa7&pT2`f-C~2U;;M zrZ+jpx;-6bBM)z0?bJe_q4$u<3>aN&S36g-3k^j^mm{swaj~1I31KaCDoV)eg#=g< z0rz|87fA$NcZ_&9S>&H7rjmHEQ3l;tx399QRI&x1N4!>x+z9lCbfZkH{W9xfOB!X= zbCO4krY>ze_5)hx&26;pxt4}V^N_7%sseQQP^4~{QD-rk5oY)lchkx8YNzTgFRv`G zetGoFA_ktpF6~WGY$ILe&Jj`t`@4;6;E(YQw9VX5HsZ~lioZ58I~gcpxc%|Zr8E%r z!?Eq{NjAEHv9a}rdSgA6N$+PMJ^yk`#H)&NsV(LXgY8s+2xBmJDCgBKd)u1o-7OB) zyJ}74+G@-4$=1Pc&7N#ON2a0uSj#rbifwwKP5!y~T~lN2?i$%d`IVS*)xV>qw9Tz z9vP@iaeg3U3hBIz^I8+)aQRjq{1WJ8%3}#*f4eB7@ zrA4|VMWJ$2V)L^f^qO*|fd@i5@j0c9g5C6@hPpJYQF}@H9?%~e#)=TGgwWjz85xjm zBLh|GY`V#*c2>chgI&3-vcw-I-oJ*oKl^w~UW6H;{RZ4Mo}p$xFQyH$ zM(R1D{?c2j%vR0uZv^S2>7egPiDiS`CUW5^69aqRM`2-Q+2GEE#7M&UoWaDzDQ-g~ zVYFZ{(eOveVdj(#I!%U%Y4md^?29d|$|NQX8lbdkJU*x`UNM-E_(qUQ>I##A>Ak)% zKk$DP190IYrbr3UE=U2tVSxJifY&|c!P7Ad^@}m{q1&nH|EWn$lERV zDEsK!V&!^dDz`X5=JW@sIlTdT&YuI!oRg>{EF}^`i>TjD_Z{N03Qr*o^G!y&R>syR z=-o|imQsV%3_7bOnS8{0RdIr1Qz<6JnIQ8D?t3dm2DG)R`V>j*(L#UKT1LC>9Q3!1 zie&-63AD+nvJ9+C>nDM#*y^pStg4<|J6h=XT2-|T)^Szk-vTHH>L8lC#0rx?HHPQJ4|g zxyK<6Icv4hPc@QN;jdAw)iy{?an{Ig@T0amb!#(p+T9>#s#_hHQwAmUboE7-n%Ss4 z8+j?%8mSH1s%cfFkBh4_Knmyk;-2C<@yT^bLbv#n66mW+!Zsxh zWb^Bk5c9U`s+5P8Q#mvJIf@hPU5>1U=8OZE8#w9vD|Sa-8D6B|@1!Ng@j1oaGFtw+ z7MeQVmHuAVXMK#&7hsO%C{XK0TZ~5zSX8eKd1;q9=_iq23}-9&dnK1%kj4&NzPLQW zV8rbM#8toJJ-m6KMN&n4Z)W376}0J!C^2fR<1P-ae~^eh59Jv;Nvw9neb*?z0v@-^9n(#cSXbl)}FI zvK#i4%?GikvDu)kUzO$B%P@-%e%qY&b16OlZ@T{?^qY!F+}HQT*~!+v+E(z=ziR6g z=*J__@4sBa(fh3LgR_-x%GO*w)C$~Uv$QO1wQHddFX8CD7#qD!HDA}&e$dtL0hePs zm;GPLvMg*9w9xCZ+RuDTZIt0=sQtWNd&k*rt~J#@a>GgLnl;svd-O8h;?RIyd8r`nOA*l%w<;J~*j`R)So2Wrg~do=rJcQv+>01gi#Gtf_&P zz5~xy*!t2-Ug@WiUk+E-;O|%0;P1ia&cD=jfhR=;pY_c+YsjgoiLF7X`68~t7&qk9 z7|=p#P%@4jb-dWeo^^mNWmFSm%DH8v@7Hv8nd;qK?w_1#@-@ARM$6Q1*Q-9xe)3hN zx%!i8^z#zHu3BqSoCo0C;oUsR@#~s;0y*Aql!WEaMfQPx!QU(UhBL4H8qSqbZ%ls< ze5!?xMp2jE?0ea)^Ori;Z{``(2jKaf&a?JYud&b(+jn5En^|mb+lgZWmf7Gl z0oZJ--%@1mK$MMml6BiN#Ef{%LWCZgRror+I9#gukVaV5AY zdzJH0R8`F#MPOmR+)akbh%EMsPTW1jJtCe%VlvDgA>_u5)H|@&D_!6#EwjMMoK`9N zNyik)-n~fqDJPyh$w?>Ig4d1dyB%HX&%KM3TVaoB_NH)L&+R1(-3@48%AJF6F%6(^ z&uJ@Ns&%jOrR=K8bc>}W-RpYAQdgRs1Sj78mxus9SS>Y|?)-7932ajGis|gRe&|gu%!?ZLm7NQH_g?Okp6g0Mr}LVj z9>Z9iFN0+M$YzC;=$xzk%`r{nb9O;|>)l9Kx>zs@yAn#oWYc)w*?b~EWt%!_8?>?c zj{znpL9c__y9IWk1F>2oeWwFdj#ot0YkBhy#p^6dv_c9N#K*<{7l+l-c<(v_7x)vWxGWdMwBfvE4^aOcY^Y7 z>NXq8%d4&|FPHzT@=0)#O^EH64DEok6Z#sDA%#}omiH>Bcm}1bVBjo`Gn0V+weCB$ z1ifX9lIY7Qsdps!=uvNFy@S&!1N0F`y<@t+1ZKg*U|HuN%}n!6h0@7-sYIQ|>!ppp zc*w=N$cyp64`U;4PH{5wPUU!If>KvW*__}xqCZJQVxmNdM$BfapAv0@EW=bX)lZ5R zCtYdo@DySUv#GT{e1n})H9EcB3pNzb60}WFwn1v<)mrF9jj|B|-^?A9V1~#qL|m;z z(L&vtRe@6oc$DCO!ueMV1v@d$S1TEmx0M|CTW*l7JjIz)QKu01pu#x&!l}eMGTp&A zt+1-mE?tmo+k0* z6b%p0qO_1jlYu8|UrSn|!xyzs@|EwgQhYR}>J(X&i#65~W+eO|_)z1qTEZ%*H57pu z(Zu@%m&sbqleOT4!z{_q%|9T6{y(9G-W&gRdEU5^6UcM$%J)gm|0K`Pzb4O5$BzUi z`tOAP@1JZBtoL2~5$ONL7^j)g|3;nvUhIEJ3+=k{eX_mH>C{C38CB)9kXLVQm)`p= z-&CjhA9a$LCC;s|QcM4Z95-Ld1LU~z%J*-PWA@kN$QXYE*LEHS>lJm(eyBeDoiFtg zBbum}R?y4u*t_A|fo+78cZ1b>ciaYAXmMLd>K&GfHEye#O|PlwhbRbH)erH9fhw#q zp}T}!4Y8$Xm8)HpYNAYY=l1^f9HnN#9|wpBn8;Nn7CB{LdPy`;uRN>lQl^!jV7i9u zL}A@+o#qmA$y>vq5E!h_LZaE2ULl32V;d3%^i-m%W2yf0#m3T)!CRgmUbL@lCV zSNe0TU$lt+BDrEuLHnh`caFzfSjkarhp!#uq3-CiVou6}rw^l)ln3;+=u(#;?{PT% z%&0eajT@pnjy2fN7`0U6yQMO{ni=srG5SJmRq}PfZ9Me-=z?P8v?01FgYi+Bc8RD@ zL~3HsS@2vNf%s*4vrKH))SZ@X6;&1M>jX$Y6tOCqu0{vvr>uf2Q?kfHQ3k|3onb?Z z+L7+s<46TrBDswq3t7}y(Fn32T?4X^MHr1?VCSJ5=)IKfXdoHNAA$1WSb48?qC8S8 z@3l^p_u7~SW-o1Pg0Xr8?KA*&f#ef$GQLQPh*%48lBzcd$!jx6`3m;p=?KY+_zWe@ zRQKxh%4#L9z3X6JN7pb^hkg7tj0d(EC6iR3VE=dOrGv@=C_lCR%)xcCr{kSro{a>s z?AA6es|>UPVn4|JOqZyn5 zHDGaN#L`(kon>$|&ID3jSH;qKJ)LK;*SS8^=ftf!k9wt?OI#{ln|5=$5Kbb&E6 z81{Ar;)=#YzW^WM*u)u~z<$UAcz_9D2BgyBpI{8lZSeIF`pu0|0;?vmP2k;N^wE`( zC}lo2-S^foW7b03w22txInDMYSHh@C48*MM>noZo3_&xKc7q^S$*;(t!bqvWvt`Uo zh*}9T{5p5O`}^&g=wHN65DeH<0vew=NYm&MT46Og=pL{JhS7&NHCEjK(vnUdV!~TsUhQo=TBu(!`_boyua(i+E~XShm^fu&W+94b$iQ;X(Q zyaE&c7T`SSNQQY^133>~Vlxwpw9uwYS&~heQgTQ2R5@9pWAcH8 zf*$nCaS*K$Nw;nzP+t7Dgz>q5p9yQ=6EcAEV?6n#%j2O>0B>E!IIS=%jygHZ*Wp;^qvqe@ zBQ_fAg?<}(B82tJAkK%ujcgB-n6q?V>Qsrig-=yfWKxYACWv)SpC-yNos zGvOPPx(qzW&Z9vt>D^)G+N=5;)wcL6wFjens5v`;Cl%ZaJSm!sX^*oqNBUiWu7;Ll zr*a)sXT0jalL%mI5`5tz-Ql;zgmSH}j`@-%A{xNI z?Fa81tew2N3iTJC;HwGfECVN?a<@~Znev$LIhocCo-NJ9BF?e3h^v_bJ{Bm2Wjt-u zO1HP1c2jfEi#%O%+Ra>pHWuwDtfX@0SBXVT1H0R>+xQc-d654rYz0g5MGQQlWi{K_ z-AuzonddI?EwJ*@|0V#ii+tO7r~p>|A2fbBUkY4r#a(d)L}niLjKk_RXA1BxT@KTg2VaO2d>;k{6BS9k zC`3$`=tyFybkJxbk;IY3rZ=NQW5*8C(HVb?i!zb2!PKInL6dZ_AinS7j5zp)>{aK~ z9xM=tthK)i(s4KE|KdWt@kn$?rK9G%Nt7AhcQAj@nBVM(>pL@p1hqw8HKDc{BCmWc zo%h{*l6l4=4#tUOekH8l+0f!VxhCf2?sRZ{Wd7|wlKJ?#WrW9-`2?)HAek$w&v*|x z=){Q4D)VA`+2B>Bvm#G~ zk3=sGnWD*e^KgsBW^xW1r50%I;tV>d<NBg$M8VTQ2HgV9StY}XW>YBk12nHi>{ z{8+AYrb!y4rPcx*>o|~rijB}y-c}gV9bWo7IG%AZo-sKp3DkM<;6x3S7sfO9`zKlp z?(3uTCQ6Ef)Usy+Zv_R;8sWk_#iBt5q~J!%22)lXj*gGbiqu_7jLyh^S`;8ZE^3Mt z4I25f!8A!4Wb0eHY?c;Grf)&G{s1x-=`Y zJzNB}_TiYMfh;%AJ+ZIgT973pALq0wO7GZr!DRYl!Q0Y@(zNbm-|ekOF2pnUUPv?= z!5)7g&T@VzUMFvqNhXe(Sqh!qA^qj7R4{nr=mk37eSt}&^3DW2(tiZfq-O%PQb%B_ z^k4w>CO^PS#sIze=KP!h+J?z*Qus~P({@Lz0lY19Yh4Y=`L3^OV=rguIXq^v=d_b+ z?2@OWdB@KT-|fkS*&=F5_;j^V%5D9`odvfNNY+tYPd7I2uo$f;Gi#Q$vOy8z9JDV> zx*R$KH;imm758Sg;@ijYR&^Iq?;Io6s*Nw#p5hXFnl=#iLWHPm$FLouW{!0RGJ*5u z(7W1y1Tc3X@>z`bM^GY?bIgDD#_1|$Z1rQVKN73g*$R0W?P)wXMViWarNt+!A(l_7 zNcMqR&&RJ-lX)dRh;to;TO~5w*$`4jysH#n_J%v5r*0*uW|bwO^+L@F3$dMdi&9fz ze#TN*No~M28&1Te>Ok!&)-7ktMJMOhKz(_}A%ose5oGnix4*0^n3LKC?jx*iDLvLLS^&02>E0f2HnLJbN1r^fW3PdO)VvNB?jC`s4!UqAupee2F@o>-#6?aAgjR!# zlF}gB;Ok^uY%zQdQ-9e$@%_FC_P5$BxVKmgciMs~_|vh!}H z!dX#QF+<|5>%dC?uLxJf74s#$OQ<|kQBnDF<>^W`xSCAd412$Q_X5JV14aSU;2sxp zOD!VmTVpTRMA{i4xtJYYviY6xxkc}U2dwXe&(NP#$qJhZ_X@Nog|f!MQ-?O7(AH#l zItsB9Ls2u#Cfr6-UuvJcf%bg+O4$3xP0{4Q#j;?i%IXULaBJK*+17;dUyx#^KNlsZdN&R;$@mKus@ z$09oI7vy#qTjMS5oqC4d;3u6R8WwNw$;E8<2k~m&nV)x#A^RjCqWgLs^}k!Zq=1 z_Nv~-I6C+pPJ^#ad4~69ynhFuSMMnE-Ku1&47Jm-=)^9i-VyR2SDNJ0^7HaLUvl6& zcPmTEnEVch=<{K(>2vbqGD`E?fW|TT97@0LuJpetO)$c5%k{Fo1WJ))MV1>JPs#1w z^If7e1GLnp9SWGGKLw_y6)S(>@=rdiF!?8tBY9tbR+fQdb09T)dM_PZ7n5_X;Z;~? zuR>27#2lwfW~7z?wqIIds`wPnTqwhnf!nf;y_N(zcwel}Mniqz;OMJcjlKPlwk4MK zkl{xGap<;{a38O?(L@J-7)yP`@Pk0v$fFNEI_DweN>#`ya#aB5aXa8Cn8$rEpYzX$ zo#xTJ2WR@WOPo{&x6U3=4lC4B^U3BN)KV&k?>jt}Xs2>nUnWE(x(bU2NnA|^8&udY z{5L9OLBL-GGZC(9l_sdCEonv4@(0t8n89|%$3+CEgK|E3dF68{o-OiuJVIwh>_MXRjwLm)y|r_st;<8SBZ9Up}6?e3Hzdi zf8u4fn-`iF51%kCGIZYxy?`6BOW4I@C)h>2?*y08IWD(3|*>}TdJ==;;bfi4|qDNL0Z>20tFa7)+*c0%GM8`zQAmz^2Jm)Bu~ z@8MBjj-1zl_p$JnS?gG$nW&G1NfvX;wt>mFtv7=g0N=pMn``l`f_4N;nas1K4-C^K zxVr@&L!z0s5i9NsuveQi!E1l1b_wi!m=p8#mJv1e=s)=17;fI-$Vlu&zD|I!9=T7n zJ^g4H;%sCNUpf^u+yeKl=77YmODJ(zmw1T`RPb9Cv3d$e&O!>9@uyn{B9CF>o>VQ z%KA+e_mZmn9=P`|0kfgxeGlAE2+4x;t^oJzZnYBrcEGcMR{#}&9|CTNyW$vo5TGmr zz}QH_pru&7B4{WGhzi9#11z@`@057>iR4OLB2-FMs zzZGy+Y{c<#Z*<@9uDI9z@Ot6)WvgzBC#x||3xBJ9+E#1>|1yn)S3oxuZPu6hn4ZrP z;Wa=i*i(G}@Ax;_hs4}J9k@Pu!`aXNVjv0s9R>X#nf_-4{y!c8^t&c~FZ93ab?gC( zXwtDCD56EjQJ{z}9q$1}_;mCFMGWXT2Na>|2m?hB;{<5Zy(Qy?hpy^cLV5luSw14XpxI0_WerQ;Z~s(y<>XqD9A1polIV z?*T>lbo2s64Cpuq6rt(}14R%xPaweCh`|gLk)}fcipbJo2a3qkAp%7d=~xLAv08@= c6rt$w07Y!kG2tuGq=F*+2Ac3ofugzlPc=3tmH+?% literal 0 HcmV?d00001 diff --git a/stm32flash_src/gpl-2.0.txt b/stm32flash_src/gpl-2.0.txt new file mode 100644 index 0000000..d159169 --- /dev/null +++ b/stm32flash_src/gpl-2.0.txt @@ -0,0 +1,339 @@ + GNU GENERAL PUBLIC LICENSE + Version 2, June 1991 + + Copyright (C) 1989, 1991 Free Software Foundation, Inc., + 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + + Preamble + + The licenses for most software are designed to take away your +freedom to share and change it. By contrast, the GNU General Public +License is intended to guarantee your freedom to share and change free +software--to make sure the software is free for all its users. This +General Public License applies to most of the Free Software +Foundation's software and to any other program whose authors commit to +using it. (Some other Free Software Foundation software is covered by +the GNU Lesser General Public License instead.) You can apply it to +your programs, too. + + When we speak of free software, we are referring to freedom, not +price. Our General Public Licenses are designed to make sure that you +have the freedom to distribute copies of free software (and charge for +this service if you wish), that you receive source code or can get it +if you want it, that you can change the software or use pieces of it +in new free programs; and that you know you can do these things. + + To protect your rights, we need to make restrictions that forbid +anyone to deny you these rights or to ask you to surrender the rights. +These restrictions translate to certain responsibilities for you if you +distribute copies of the software, or if you modify it. + + For example, if you distribute copies of such a program, whether +gratis or for a fee, you must give the recipients all the rights that +you have. You must make sure that they, too, receive or can get the +source code. And you must show them these terms so they know their +rights. + + We protect your rights with two steps: (1) copyright the software, and +(2) offer you this license which gives you legal permission to copy, +distribute and/or modify the software. + + Also, for each author's protection and ours, we want to make certain +that everyone understands that there is no warranty for this free +software. If the software is modified by someone else and passed on, we +want its recipients to know that what they have is not the original, so +that any problems introduced by others will not reflect on the original +authors' reputations. + + Finally, any free program is threatened constantly by software +patents. We wish to avoid the danger that redistributors of a free +program will individually obtain patent licenses, in effect making the +program proprietary. To prevent this, we have made it clear that any +patent must be licensed for everyone's free use or not licensed at all. + + The precise terms and conditions for copying, distribution and +modification follow. + + GNU GENERAL PUBLIC LICENSE + TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION + + 0. This License applies to any program or other work which contains +a notice placed by the copyright holder saying it may be distributed +under the terms of this General Public License. The "Program", below, +refers to any such program or work, and a "work based on the Program" +means either the Program or any derivative work under copyright law: +that is to say, a work containing the Program or a portion of it, +either verbatim or with modifications and/or translated into another +language. (Hereinafter, translation is included without limitation in +the term "modification".) Each licensee is addressed as "you". + +Activities other than copying, distribution and modification are not +covered by this License; they are outside its scope. The act of +running the Program is not restricted, and the output from the Program +is covered only if its contents constitute a work based on the +Program (independent of having been made by running the Program). +Whether that is true depends on what the Program does. + + 1. You may copy and distribute verbatim copies of the Program's +source code as you receive it, in any medium, provided that you +conspicuously and appropriately publish on each copy an appropriate +copyright notice and disclaimer of warranty; keep intact all the +notices that refer to this License and to the absence of any warranty; +and give any other recipients of the Program a copy of this License +along with the Program. + +You may charge a fee for the physical act of transferring a copy, and +you may at your option offer warranty protection in exchange for a fee. + + 2. You may modify your copy or copies of the Program or any portion +of it, thus forming a work based on the Program, and copy and +distribute such modifications or work under the terms of Section 1 +above, provided that you also meet all of these conditions: + + a) You must cause the modified files to carry prominent notices + stating that you changed the files and the date of any change. + + b) You must cause any work that you distribute or publish, that in + whole or in part contains or is derived from the Program or any + part thereof, to be licensed as a whole at no charge to all third + parties under the terms of this License. + + c) If the modified program normally reads commands interactively + when run, you must cause it, when started running for such + interactive use in the most ordinary way, to print or display an + announcement including an appropriate copyright notice and a + notice that there is no warranty (or else, saying that you provide + a warranty) and that users may redistribute the program under + these conditions, and telling the user how to view a copy of this + License. (Exception: if the Program itself is interactive but + does not normally print such an announcement, your work based on + the Program is not required to print an announcement.) + +These requirements apply to the modified work as a whole. If +identifiable sections of that work are not derived from the Program, +and can be reasonably considered independent and separate works in +themselves, then this License, and its terms, do not apply to those +sections when you distribute them as separate works. But when you +distribute the same sections as part of a whole which is a work based +on the Program, the distribution of the whole must be on the terms of +this License, whose permissions for other licensees extend to the +entire whole, and thus to each and every part regardless of who wrote it. + +Thus, it is not the intent of this section to claim rights or contest +your rights to work written entirely by you; rather, the intent is to +exercise the right to control the distribution of derivative or +collective works based on the Program. + +In addition, mere aggregation of another work not based on the Program +with the Program (or with a work based on the Program) on a volume of +a storage or distribution medium does not bring the other work under +the scope of this License. + + 3. You may copy and distribute the Program (or a work based on it, +under Section 2) in object code or executable form under the terms of +Sections 1 and 2 above provided that you also do one of the following: + + a) Accompany it with the complete corresponding machine-readable + source code, which must be distributed under the terms of Sections + 1 and 2 above on a medium customarily used for software interchange; or, + + b) Accompany it with a written offer, valid for at least three + years, to give any third party, for a charge no more than your + cost of physically performing source distribution, a complete + machine-readable copy of the corresponding source code, to be + distributed under the terms of Sections 1 and 2 above on a medium + customarily used for software interchange; or, + + c) Accompany it with the information you received as to the offer + to distribute corresponding source code. (This alternative is + allowed only for noncommercial distribution and only if you + received the program in object code or executable form with such + an offer, in accord with Subsection b above.) + +The source code for a work means the preferred form of the work for +making modifications to it. For an executable work, complete source +code means all the source code for all modules it contains, plus any +associated interface definition files, plus the scripts used to +control compilation and installation of the executable. However, as a +special exception, the source code distributed need not include +anything that is normally distributed (in either source or binary +form) with the major components (compiler, kernel, and so on) of the +operating system on which the executable runs, unless that component +itself accompanies the executable. + +If distribution of executable or object code is made by offering +access to copy from a designated place, then offering equivalent +access to copy the source code from the same place counts as +distribution of the source code, even though third parties are not +compelled to copy the source along with the object code. + + 4. You may not copy, modify, sublicense, or distribute the Program +except as expressly provided under this License. Any attempt +otherwise to copy, modify, sublicense or distribute the Program is +void, and will automatically terminate your rights under this License. +However, parties who have received copies, or rights, from you under +this License will not have their licenses terminated so long as such +parties remain in full compliance. + + 5. You are not required to accept this License, since you have not +signed it. However, nothing else grants you permission to modify or +distribute the Program or its derivative works. These actions are +prohibited by law if you do not accept this License. Therefore, by +modifying or distributing the Program (or any work based on the +Program), you indicate your acceptance of this License to do so, and +all its terms and conditions for copying, distributing or modifying +the Program or works based on it. + + 6. Each time you redistribute the Program (or any work based on the +Program), the recipient automatically receives a license from the +original licensor to copy, distribute or modify the Program subject to +these terms and conditions. You may not impose any further +restrictions on the recipients' exercise of the rights granted herein. +You are not responsible for enforcing compliance by third parties to +this License. + + 7. If, as a consequence of a court judgment or allegation of patent +infringement or for any other reason (not limited to patent issues), +conditions are imposed on you (whether by court order, agreement or +otherwise) that contradict the conditions of this License, they do not +excuse you from the conditions of this License. If you cannot +distribute so as to satisfy simultaneously your obligations under this +License and any other pertinent obligations, then as a consequence you +may not distribute the Program at all. For example, if a patent +license would not permit royalty-free redistribution of the Program by +all those who receive copies directly or indirectly through you, then +the only way you could satisfy both it and this License would be to +refrain entirely from distribution of the Program. + +If any portion of this section is held invalid or unenforceable under +any particular circumstance, the balance of the section is intended to +apply and the section as a whole is intended to apply in other +circumstances. + +It is not the purpose of this section to induce you to infringe any +patents or other property right claims or to contest validity of any +such claims; this section has the sole purpose of protecting the +integrity of the free software distribution system, which is +implemented by public license practices. Many people have made +generous contributions to the wide range of software distributed +through that system in reliance on consistent application of that +system; it is up to the author/donor to decide if he or she is willing +to distribute software through any other system and a licensee cannot +impose that choice. + +This section is intended to make thoroughly clear what is believed to +be a consequence of the rest of this License. + + 8. If the distribution and/or use of the Program is restricted in +certain countries either by patents or by copyrighted interfaces, the +original copyright holder who places the Program under this License +may add an explicit geographical distribution limitation excluding +those countries, so that distribution is permitted only in or among +countries not thus excluded. In such case, this License incorporates +the limitation as if written in the body of this License. + + 9. The Free Software Foundation may publish revised and/or new versions +of the General Public License from time to time. Such new versions will +be similar in spirit to the present version, but may differ in detail to +address new problems or concerns. + +Each version is given a distinguishing version number. If the Program +specifies a version number of this License which applies to it and "any +later version", you have the option of following the terms and conditions +either of that version or of any later version published by the Free +Software Foundation. If the Program does not specify a version number of +this License, you may choose any version ever published by the Free Software +Foundation. + + 10. If you wish to incorporate parts of the Program into other free +programs whose distribution conditions are different, write to the author +to ask for permission. For software which is copyrighted by the Free +Software Foundation, write to the Free Software Foundation; we sometimes +make exceptions for this. Our decision will be guided by the two goals +of preserving the free status of all derivatives of our free software and +of promoting the sharing and reuse of software generally. + + NO WARRANTY + + 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY +FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN +OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES +PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED +OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS +TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE +PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, +REPAIR OR CORRECTION. + + 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING +WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR +REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, +INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING +OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED +TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY +YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER +PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE +POSSIBILITY OF SUCH DAMAGES. + + END OF TERMS AND CONDITIONS + + How to Apply These Terms to Your New Programs + + If you develop a new program, and you want it to be of the greatest +possible use to the public, the best way to achieve this is to make it +free software which everyone can redistribute and change under these terms. + + To do so, attach the following notices to the program. It is safest +to attach them to the start of each source file to most effectively +convey the exclusion of warranty; and each file should have at least +the "copyright" line and a pointer to where the full notice is found. + + + Copyright (C) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License along + with this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + +Also add information on how to contact you by electronic and paper mail. + +If the program is interactive, make it output a short notice like this +when it starts in an interactive mode: + + Gnomovision version 69, Copyright (C) year name of author + Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'. + This is free software, and you are welcome to redistribute it + under certain conditions; type `show c' for details. + +The hypothetical commands `show w' and `show c' should show the appropriate +parts of the General Public License. Of course, the commands you use may +be called something other than `show w' and `show c'; they could even be +mouse-clicks or menu items--whatever suits your program. + +You should also get your employer (if you work as a programmer) or your +school, if any, to sign a "copyright disclaimer" for the program, if +necessary. Here is a sample; alter the names: + + Yoyodyne, Inc., hereby disclaims all copyright interest in the program + `Gnomovision' (which makes passes at compilers) written by James Hacker. + + , 1 April 1989 + Ty Coon, President of Vice + +This General Public License does not permit incorporating your program into +proprietary programs. If your program is a subroutine library, you may +consider it more useful to permit linking proprietary applications with the +library. If this is what you want to do, use the GNU Lesser General +Public License instead of this License. diff --git a/stm32flash_src/i2c.c b/stm32flash_src/i2c.c new file mode 100644 index 0000000..10e6bb1 --- /dev/null +++ b/stm32flash_src/i2c.c @@ -0,0 +1,209 @@ +/* + stm32flash - Open Source ST STM32 flash program for *nix + Copyright (C) 2014 Antonio Borneo + + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public License + as published by the Free Software Foundation; either version 2 + of the License, or (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. +*/ + + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "serial.h" +#include "port.h" + + +#if !defined(__linux__) + +static port_err_t i2c_open(struct port_interface *port, + struct port_options *ops) +{ + return PORT_ERR_NODEV; +} + +struct port_interface port_i2c = { + .name = "i2c", + .open = i2c_open, +}; + +#else + +#ifdef __ANDROID__ +#define I2C_SLAVE 0x0703 /* Use this slave address */ +#define I2C_FUNCS 0x0705 /* Get the adapter functionality mask */ +/* To determine what functionality is present */ +#define I2C_FUNC_I2C 0x00000001 +#else +#include +#include +#endif + +#include + +struct i2c_priv { + int fd; + int addr; +}; + +static port_err_t i2c_open(struct port_interface *port, + struct port_options *ops) +{ + struct i2c_priv *h; + int fd, addr, ret; + unsigned long funcs; + + /* 1. check device name match */ + if (strncmp(ops->device, "/dev/i2c-", strlen("/dev/i2c-"))) + return PORT_ERR_NODEV; + + /* 2. check options */ + addr = ops->bus_addr; + if (addr < 0x03 || addr > 0x77) { + fprintf(stderr, "I2C address out of range [0x03-0x77]\n"); + return PORT_ERR_UNKNOWN; + } + + /* 3. open it */ + h = calloc(sizeof(*h), 1); + if (h == NULL) { + fprintf(stderr, "End of memory\n"); + return PORT_ERR_UNKNOWN; + } + fd = open(ops->device, O_RDWR); + if (fd < 0) { + fprintf(stderr, "Unable to open special file \"%s\"\n", + ops->device); + free(h); + return PORT_ERR_UNKNOWN; + } + + /* 3.5. Check capabilities */ + ret = ioctl(fd, I2C_FUNCS, &funcs); + if (ret < 0) { + fprintf(stderr, "I2C ioctl(funcs) error %d\n", errno); + close(fd); + free(h); + return PORT_ERR_UNKNOWN; + } + if ((funcs & I2C_FUNC_I2C) == 0) { + fprintf(stderr, "Error: controller is not I2C, only SMBUS.\n"); + close(fd); + free(h); + return PORT_ERR_UNKNOWN; + } + + /* 4. set options */ + ret = ioctl(fd, I2C_SLAVE, addr); + if (ret < 0) { + fprintf(stderr, "I2C ioctl(slave) error %d\n", errno); + close(fd); + free(h); + return PORT_ERR_UNKNOWN; + } + + h->fd = fd; + h->addr = addr; + port->private = h; + return PORT_ERR_OK; +} + +static port_err_t i2c_close(struct port_interface *port) +{ + struct i2c_priv *h; + + h = (struct i2c_priv *)port->private; + if (h == NULL) + return PORT_ERR_UNKNOWN; + close(h->fd); + free(h); + port->private = NULL; + return PORT_ERR_OK; +} + +static port_err_t i2c_read(struct port_interface *port, void *buf, + size_t nbyte) +{ + struct i2c_priv *h; + int ret; + + h = (struct i2c_priv *)port->private; + if (h == NULL) + return PORT_ERR_UNKNOWN; + ret = read(h->fd, buf, nbyte); + if (ret != nbyte) + return PORT_ERR_UNKNOWN; + return PORT_ERR_OK; +} + +static port_err_t i2c_write(struct port_interface *port, void *buf, + size_t nbyte) +{ + struct i2c_priv *h; + int ret; + + h = (struct i2c_priv *)port->private; + if (h == NULL) + return PORT_ERR_UNKNOWN; + ret = write(h->fd, buf, nbyte); + if (ret != nbyte) + return PORT_ERR_UNKNOWN; + return PORT_ERR_OK; +} + +static port_err_t i2c_gpio(struct port_interface *port, serial_gpio_t n, + int level) +{ + return PORT_ERR_OK; +} + +static const char *i2c_get_cfg_str(struct port_interface *port) +{ + struct i2c_priv *h; + static char str[11]; + + h = (struct i2c_priv *)port->private; + if (h == NULL) + return "INVALID"; + snprintf(str, sizeof(str), "addr 0x%2x", h->addr); + return str; +} + +static struct varlen_cmd i2c_cmd_get_reply[] = { + {0x10, 11}, + {0x11, 17}, + {0x12, 18}, + { /* sentinel */ } +}; + +struct port_interface port_i2c = { + .name = "i2c", + .flags = PORT_STRETCH_W, + .open = i2c_open, + .close = i2c_close, + .read = i2c_read, + .write = i2c_write, + .gpio = i2c_gpio, + .cmd_get_reply = i2c_cmd_get_reply, + .get_cfg_str = i2c_get_cfg_str, +}; + +#endif diff --git a/stm32flash_src/init.c b/stm32flash_src/init.c new file mode 100644 index 0000000..2e72385 --- /dev/null +++ b/stm32flash_src/init.c @@ -0,0 +1,272 @@ +/* + stm32flash - Open Source ST STM32 flash program for *nix + Copyright (C) 2010 Geoffrey McRae + Copyright (C) 2013 Antonio Borneo + + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public License + as published by the Free Software Foundation; either version 2 + of the License, or (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. +*/ + + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "init.h" +#include "serial.h" +#include "stm32.h" +#include "port.h" + +struct gpio_list { + struct gpio_list *next; + int gpio; + int input; /* 1 if direction of gpio should be changed back to input. */ + int exported; /* 0 if gpio should be unexported. */ +}; + +static int write_to(const char *filename, const char *value) +{ + int fd, ret; + + fd = open(filename, O_WRONLY); + if (fd < 0) { + fprintf(stderr, "Cannot open file \"%s\"\n", filename); + return 0; + } + ret = write(fd, value, strlen(value)); + if (ret < 0) { + fprintf(stderr, "Error writing in file \"%s\"\n", filename); + close(fd); + return 0; + } + close(fd); + return 1; +} + +#if !defined(__linux__) +static int drive_gpio(int n, int level, struct gpio_list **gpio_to_release) +{ + fprintf(stderr, "GPIO control only available in Linux\n"); + return 0; +} +#else +static int read_from(const char *filename, char *buf, size_t len) +{ + int fd, ret; + ssize_t n = 0; + + fd = open(filename, O_RDONLY); + if (fd < 0) { + fprintf(stderr, "Cannot open file \"%s\"\n", filename); + return 0; + } + + do { + ret = read(fd, buf + n, len - n); + if (ret < 0) { + if (errno == EINTR || errno == EAGAIN || errno == EWOULDBLOCK) + continue; /* try again */ + fprintf(stderr, "Error reading in file \"%s\"\n", filename); + close(fd); + return 0; + } + n += ret; + } while (n < len && ret); + + close(fd); + return n; +} + +static int drive_gpio(int n, int level, struct gpio_list **gpio_to_release) +{ + char num[16]; /* sized to carry MAX_INT */ + char file[48]; /* sized to carry longest filename */ + char dir; + struct stat buf; + struct gpio_list *new; + int ret; + int exported = 1; + int input = 0; + + sprintf(file, "/sys/class/gpio/gpio%d/value", n); + ret = stat(file, &buf); + if (ret) { + /* file miss, GPIO not exported yet */ + sprintf(num, "%d", n); + ret = write_to("/sys/class/gpio/export", num); + if (!ret) + return 0; + ret = stat(file, &buf); + if (ret) { + fprintf(stderr, "GPIO %d not available\n", n); + return 0; + } + exported = 0; + } + + sprintf(file, "/sys/class/gpio/gpio%d/direction", n); + ret = stat(file, &buf); + if (!ret) + if (read_from(file, &dir, sizeof(dir))) + if (dir == 'i') + input = 1; + + if (exported == 0 || input == 1) { + new = (struct gpio_list *)malloc(sizeof(struct gpio_list)); + if (new == NULL) { + fprintf(stderr, "Out of memory\n"); + return 0; + } + new->gpio = n; + new->exported = exported; + new->input = input; + new->next = *gpio_to_release; + *gpio_to_release = new; + } + + return write_to(file, level ? "high" : "low"); +} +#endif + +static int release_gpio(int n, int input, int exported) +{ + char num[16]; /* sized to carry MAX_INT */ + char file[48]; /* sized to carry longest filename */ + + sprintf(num, "%d", n); + if (input) { + sprintf(file, "/sys/class/gpio/gpio%d/direction", n); + write_to(file, "in"); + } + if (!exported) + write_to("/sys/class/gpio/unexport", num); + + return 1; +} + +static int gpio_sequence(struct port_interface *port, const char *s, size_t l) +{ + struct gpio_list *gpio_to_release = NULL, *to_free; + int ret, level, gpio; + + ret = 1; + while (ret == 1 && *s && l > 0) { + if (*s == '-') { + level = 0; + s++; + l--; + } else + level = 1; + + if (isdigit(*s)) { + gpio = atoi(s); + while (isdigit(*s)) { + s++; + l--; + } + } else if (!strncmp(s, "rts", 3)) { + gpio = -GPIO_RTS; + s += 3; + l -= 3; + } else if (!strncmp(s, "dtr", 3)) { + gpio = -GPIO_DTR; + s += 3; + l -= 3; + } else if (!strncmp(s, "brk", 3)) { + gpio = -GPIO_BRK; + s += 3; + l -= 3; + } else { + fprintf(stderr, "Character \'%c\' is not a digit\n", *s); + ret = 0; + break; + } + + if (*s && (l > 0)) { + if (*s == ',') { + s++; + l--; + } else { + fprintf(stderr, "Character \'%c\' is not a separator\n", *s); + ret = 0; + break; + } + } + if (gpio < 0) + ret = (port->gpio(port, -gpio, level) == PORT_ERR_OK); + else + ret = drive_gpio(gpio, level, &gpio_to_release); + usleep(100000); + } + + while (gpio_to_release) { + release_gpio(gpio_to_release->gpio, gpio_to_release->input, gpio_to_release->exported); + to_free = gpio_to_release; + gpio_to_release = gpio_to_release->next; + free(to_free); + } + usleep(500000); + return ret; +} + +static int gpio_bl_entry(struct port_interface *port, const char *seq) +{ + char *s; + + if (seq == NULL || seq[0] == ':') + return 1; + + s = strchr(seq, ':'); + if (s == NULL) + return gpio_sequence(port, seq, strlen(seq)); + + return gpio_sequence(port, seq, s - seq); +} + +static int gpio_bl_exit(struct port_interface *port, const char *seq) +{ + char *s; + + if (seq == NULL) + return 1; + + s = strchr(seq, ':'); + if (s == NULL || s[1] == '\0') + return 1; + + return gpio_sequence(port, s + 1, strlen(s + 1)); +} + +int init_bl_entry(struct port_interface *port, const char *seq) +{ + if (seq) + return gpio_bl_entry(port, seq); + + return 1; +} + +int init_bl_exit(stm32_t *stm, struct port_interface *port, const char *seq) +{ + if (seq && strchr(seq, ':')) + return gpio_bl_exit(port, seq); + + if (stm32_reset_device(stm) != STM32_ERR_OK) + return 0; + return 1; +} diff --git a/stm32flash_src/init.h b/stm32flash_src/init.h new file mode 100644 index 0000000..6075b51 --- /dev/null +++ b/stm32flash_src/init.h @@ -0,0 +1,31 @@ +/* + stm32flash - Open Source ST STM32 flash program for *nix + Copyright (C) 2010 Geoffrey McRae + Copyright (C) 2013 Antonio Borneo + + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public License + as published by the Free Software Foundation; either version 2 + of the License, or (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. +*/ + + +#ifndef _INIT_H +#define _INIT_H + +#include "stm32.h" +#include "port.h" + +int init_bl_entry(struct port_interface *port, const char *seq); +int init_bl_exit(stm32_t *stm, struct port_interface *port, const char *seq); + +#endif diff --git a/stm32flash_src/main.c b/stm32flash_src/main.c new file mode 100644 index 0000000..1157d2e --- /dev/null +++ b/stm32flash_src/main.c @@ -0,0 +1,885 @@ +/* + stm32flash - Open Source ST STM32 flash program for *nix + Copyright 2010 Geoffrey McRae + Copyright 2011 Steve Markgraf + Copyright 2012-2016 Tormod Volden + Copyright 2013-2016 Antonio Borneo + + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public License + as published by the Free Software Foundation; either version 2 + of the License, or (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. +*/ + +#include +#include +#include +#include +#include +#include +#include + +#include "init.h" +#include "utils.h" +#include "serial.h" +#include "stm32.h" +#include "parsers/parser.h" +#include "port.h" + +#include "parsers/binary.h" +#include "parsers/hex.h" + +#define VERSION "0.5" + +/* device globals */ +stm32_t *stm = NULL; + +void *p_st = NULL; +parser_t *parser = NULL; + +/* settings */ +struct port_options port_opts = { + .device = NULL, + .baudRate = SERIAL_BAUD_115200, + .serial_mode = "8e1", + .bus_addr = 0, + .rx_frame_max = STM32_MAX_RX_FRAME, + .tx_frame_max = STM32_MAX_TX_FRAME, +}; + +enum actions { + ACT_NONE, + ACT_READ, + ACT_WRITE, + ACT_WRITE_UNPROTECT, + ACT_READ_PROTECT, + ACT_READ_UNPROTECT, + ACT_ERASE_ONLY, + ACT_CRC +}; + +enum actions action = ACT_NONE; +int npages = 0; +int spage = 0; +int no_erase = 0; +char verify = 0; +int retry = 10; +char exec_flag = 0; +uint32_t execute = 0; +char init_flag = 1; +char force_binary = 0; +char reset_flag = 0; +char *filename; +char *gpio_seq = NULL; +uint32_t start_addr = 0; +uint32_t readwrite_len = 0; +char erase_necessary = 0; + +/* functions */ +int parse_options(int argc, char *argv[]); +void show_help(char *name); + +static const char *action2str(enum actions act) +{ + switch (act) { + case ACT_READ: + return "memory read"; + case ACT_WRITE: + return "memory write"; + case ACT_WRITE_UNPROTECT: + return "write unprotect"; + case ACT_READ_PROTECT: + return "read protect"; + case ACT_READ_UNPROTECT: + return "read unprotect"; + case ACT_ERASE_ONLY: + return "flash erase"; + case ACT_CRC: + return "memory crc"; + default: + return ""; + }; +} + +static void err_multi_action(enum actions new) +{ + fprintf(stderr, + "ERROR: Invalid options !\n" + "\tCan't execute \"%s\" and \"%s\" at the same time.\n", + action2str(action), action2str(new)); +} + +static int is_addr_in_ram(uint32_t addr) +{ + return addr >= stm->dev->ram_start && addr < stm->dev->ram_end; +} + +static int is_addr_in_flash(uint32_t addr) +{ + return addr >= stm->dev->fl_start && addr < stm->dev->fl_end; +} + +static int is_addr_in_eeprom(uint32_t addr) +{ + return addr >= stm->dev->eeprom_start && addr < stm->dev->eeprom_end; +} + +/* returns the page that contains address "addr" */ +static int flash_addr_to_page_floor(uint32_t addr) +{ + int page; + uint32_t *psize; + + if (!is_addr_in_flash(addr)) + return 0; + + page = 0; + addr -= stm->dev->fl_start; + psize = stm->dev->fl_ps; + + while (addr >= psize[0]) { + addr -= psize[0]; + page++; + if (psize[1]) + psize++; + } + + return page; +} + +/* returns the first page whose start addr is >= "addr" */ +int flash_addr_to_page_ceil(uint32_t addr) +{ + int page; + uint32_t *psize; + + if (!(addr >= stm->dev->fl_start && addr <= stm->dev->fl_end)) + return 0; + + page = 0; + addr -= stm->dev->fl_start; + psize = stm->dev->fl_ps; + + while (addr >= psize[0]) { + addr -= psize[0]; + page++; + if (psize[1]) + psize++; + } + + return addr ? page + 1 : page; +} + +/* returns the lower address of flash page "page" */ +static uint32_t flash_page_to_addr(int page) +{ + int i; + uint32_t addr, *psize; + + addr = stm->dev->fl_start; + psize = stm->dev->fl_ps; + + for (i = 0; i < page; i++) { + addr += psize[0]; + if (psize[1]) + psize++; + } + + return addr; +} + +int main(int argc, char* argv[]) { + struct port_interface *port = NULL; + int ret = 1; + stm32_err_t s_err = 0; + parser_err_t perr = 0; + FILE *diag = stdout; + + fprintf(diag, "stm32flash " VERSION "\n\n"); + fprintf(diag, "http://stm32flash.sourceforge.net/\n\n"); + if (parse_options(argc, argv) != 0) + goto close; + + if ((action == ACT_READ) && filename[0] == '-') { + diag = stderr; + } + + if (action == ACT_WRITE) { + /* first try hex */ + if (!force_binary) { + parser = &PARSER_HEX; + p_st = parser->init(); + if (!p_st) { + fprintf(stderr, "%s Parser failed to initialize\n", parser->name); + goto close; + } + } + + if (force_binary || (perr = parser->open(p_st, filename, 0)) != PARSER_ERR_OK) { + if (force_binary || perr == PARSER_ERR_INVALID_FILE) { + if (!force_binary) { + parser->close(p_st); + p_st = NULL; + } + + /* now try binary */ + parser = &PARSER_BINARY; + p_st = parser->init(); + if (!p_st) { + fprintf(stderr, "%s Parser failed to initialize\n", parser->name); + goto close; + } + perr = parser->open(p_st, filename, 0); + } + + /* if still have an error, fail */ + if (perr != PARSER_ERR_OK) { + fprintf(stderr, "%s ERROR: %s\n", parser->name, parser_errstr(perr)); + if (perr == PARSER_ERR_SYSTEM) perror(filename); + goto close; + } + } + + fprintf(diag, "Using Parser : %s\n", parser->name); + } else { + parser = &PARSER_BINARY; + p_st = parser->init(); + if (!p_st) { + fprintf(stderr, "%s Parser failed to initialize\n", parser->name); + goto close; + } + } + + if (port_open(&port_opts, &port) != PORT_ERR_OK) { + fprintf(stderr, "Failed to open port: %s\n", port_opts.device); + goto close; + } + + fprintf(diag, "Interface %s: %s\n", port->name, port->get_cfg_str(port)); + if (init_flag && init_bl_entry(port, gpio_seq) == 0) + goto close; + stm = stm32_init(port, init_flag); + if (!stm) + goto close; + + fprintf(diag, "Version : 0x%02x\n", stm->bl_version); + if (port->flags & PORT_GVR_ETX) { + fprintf(diag, "Option 1 : 0x%02x\n", stm->option1); + fprintf(diag, "Option 2 : 0x%02x\n", stm->option2); + } + fprintf(diag, "Device ID : 0x%04x (%s)\n", stm->pid, stm->dev->name); + fprintf(diag, "- RAM : %dKiB (%db reserved by bootloader)\n", (stm->dev->ram_end - 0x20000000) / 1024, stm->dev->ram_start - 0x20000000); + fprintf(diag, "- Flash : %dKiB (size first sector: %dx%d)\n", (stm->dev->fl_end - stm->dev->fl_start ) / 1024, stm->dev->fl_pps, stm->dev->fl_ps[0]); + fprintf(diag, "- Option RAM : %db\n", stm->dev->opt_end - stm->dev->opt_start + 1); + fprintf(diag, "- System RAM : %dKiB\n", (stm->dev->mem_end - stm->dev->mem_start) / 1024); + + uint8_t buffer[256]; + uint32_t addr, start, end; + unsigned int len; + int failed = 0; + int first_page, num_pages; + + /* + * Cleanup addresses: + * + * Starting from options + * start_addr, readwrite_len, spage, npages + * and using device memory size, compute + * start, end, first_page, num_pages + */ + if (start_addr || readwrite_len) { + start = start_addr; + + if (is_addr_in_flash(start)) + end = stm->dev->fl_end; + else { + no_erase = 1; + if (is_addr_in_eeprom(start)) { + end = stm->dev->eeprom_end; + } else { + if (is_addr_in_ram(start)) { + end = stm->dev->ram_end; + } else { + printf("Error: address is not in flash nor RAM nor EEPROM\n"); + return -1; + /* end = start + sizeof(uint32_t); */ + } + } + } + + if (readwrite_len && (end > start + readwrite_len)) + end = start + readwrite_len; + + first_page = flash_addr_to_page_floor(start); + if (!first_page && end == stm->dev->fl_end) + num_pages = STM32_MASS_ERASE; + else + num_pages = flash_addr_to_page_ceil(end) - first_page; + } else if (!spage && !npages) { + start = stm->dev->fl_start; + end = stm->dev->fl_end; + first_page = 0; + num_pages = STM32_MASS_ERASE; + } else { + first_page = spage; + start = flash_page_to_addr(first_page); + if (start > stm->dev->fl_end) { + fprintf(stderr, "Address range exceeds flash size.\n"); + goto close; + } + + if (npages) { + num_pages = npages; + end = flash_page_to_addr(first_page + num_pages); + if (end > stm->dev->fl_end) + end = stm->dev->fl_end; + } else { + end = stm->dev->fl_end; + num_pages = flash_addr_to_page_ceil(end) - first_page; + } + + if (!first_page && end == stm->dev->fl_end) + num_pages = STM32_MASS_ERASE; + } + + if (action == ACT_READ) { + unsigned int max_len = port_opts.rx_frame_max; + + fprintf(diag, "Memory read\n"); + + perr = parser->open(p_st, filename, 1); + if (perr != PARSER_ERR_OK) { + fprintf(stderr, "%s ERROR: %s\n", parser->name, parser_errstr(perr)); + if (perr == PARSER_ERR_SYSTEM) + perror(filename); + goto close; + } + + fflush(diag); + addr = start; + while(addr < end) { + uint32_t left = end - addr; + len = max_len > left ? left : max_len; + s_err = stm32_read_memory(stm, addr, buffer, len); + if (s_err != STM32_ERR_OK) { + fprintf(stderr, "Failed to read memory at address 0x%08x, target write-protected?\n", addr); + goto close; + } + if (parser->write(p_st, buffer, len) != PARSER_ERR_OK) + { + fprintf(stderr, "Failed to write data to file\n"); + goto close; + } + addr += len; + + fprintf(diag, + "\rRead address 0x%08x (%.2f%%) ", + addr, + (100.0f / (float)(end - start)) * (float)(addr - start) + ); + fflush(diag); + } + fprintf(diag, "Done.\n"); + ret = 0; + goto close; + } else if (action == ACT_READ_PROTECT) { + fprintf(stdout, "Read-Protecting flash\n"); + /* the device automatically performs a reset after the sending the ACK */ + reset_flag = 0; + stm32_readprot_memory(stm); + fprintf(stdout, "Done.\n"); + } else if (action == ACT_READ_UNPROTECT) { + fprintf(stdout, "Read-UnProtecting flash\n"); + /* the device automatically performs a reset after the sending the ACK */ + reset_flag = 0; + stm32_runprot_memory(stm); + fprintf(stdout, "Done.\n"); + } else if (action == ACT_ERASE_ONLY) { + ret = 0; + fprintf(stdout, "Erasing flash\n"); + + if (num_pages != STM32_MASS_ERASE && + (start != flash_page_to_addr(first_page) + || end != flash_page_to_addr(first_page + num_pages))) { + fprintf(stderr, "Specified start & length are invalid (must be page aligned)\n"); + ret = 1; + goto close; + } + + s_err = stm32_erase_memory(stm, first_page, num_pages); + if (s_err != STM32_ERR_OK) { + fprintf(stderr, "Failed to erase memory\n"); + ret = 1; + goto close; + } + } else if (action == ACT_WRITE_UNPROTECT) { + fprintf(diag, "Write-unprotecting flash\n"); + /* the device automatically performs a reset after the sending the ACK */ + reset_flag = 0; + stm32_wunprot_memory(stm); + fprintf(diag, "Done.\n"); + + } else if (action == ACT_WRITE) { + fprintf(diag, "Write to memory\n"); + + off_t offset = 0; + ssize_t r; + unsigned int size; + unsigned int max_wlen, max_rlen; + + max_wlen = port_opts.tx_frame_max - 2; /* skip len and crc */ + max_wlen &= ~3; /* 32 bit aligned */ + + max_rlen = port_opts.rx_frame_max; + max_rlen = max_rlen < max_wlen ? max_rlen : max_wlen; + + /* Assume data from stdin is whole device */ + if (filename[0] == '-' && filename[1] == '\0') + size = end - start; + else + size = parser->size(p_st); + + printf("Data size: %d bytes\n", size); + if (erase_necessary) { + num_pages = size / stm->dev->fl_ps[0]; + if ((size % stm->dev->fl_ps[0]) != 0) { + num_pages++; + } + printf("%d flash memory pages to be erased\n", num_pages); + } + + // TODO: It is possible to write to non-page boundaries, by reading out flash + // from partial pages and combining with the input data + // if ((start % stm->dev->fl_ps[i]) != 0 || (end % stm->dev->fl_ps[i]) != 0) { + // fprintf(stderr, "Specified start & length are invalid (must be page aligned)\n"); + // goto close; + // } + + // TODO: If writes are not page aligned, we should probably read out existing flash + // contents first, so it can be preserved and combined with new data + if (!no_erase && num_pages) { + fprintf(diag, "Erasing memory\n"); + s_err = stm32_erase_memory(stm, first_page, num_pages); + if (s_err != STM32_ERR_OK) { + fprintf(stderr, "Failed to erase memory\n"); + goto close; + } + } + + fflush(diag); + addr = start; + + while(addr < end && offset < size) { + uint32_t left = end - addr; + len = max_wlen > left ? left : max_wlen; + len = len > size - offset ? size - offset : len; + + if (parser->read(p_st, buffer, &len) != PARSER_ERR_OK) + goto close; + + if (len == 0) { + if (filename[0] == '-') { + break; + } else { + fprintf(stderr, "Failed to read input file\n"); + goto close; + } + } + + again: + s_err = stm32_write_memory(stm, addr, buffer, len); + if (s_err != STM32_ERR_OK) { + fprintf(stderr, "Failed to write memory at address 0x%08x\n", addr); + goto close; + } + + if (verify) { + uint8_t compare[len]; + unsigned int offset, rlen; + + offset = 0; + while (offset < len) { + rlen = len - offset; + rlen = rlen < max_rlen ? rlen : max_rlen; + s_err = stm32_read_memory(stm, addr + offset, compare + offset, rlen); + if (s_err != STM32_ERR_OK) { + fprintf(stderr, "Failed to read memory at address 0x%08x\n", addr + offset); + goto close; + } + offset += rlen; + } + + for(r = 0; r < len; ++r) + if (buffer[r] != compare[r]) { + if (failed == retry) { + fprintf(stderr, "Failed to verify at address 0x%08x, expected 0x%02x and found 0x%02x\n", + (uint32_t)(addr + r), + buffer [r], + compare[r] + ); + goto close; + } + ++failed; + goto again; + } + + failed = 0; + } + + addr += len; + offset += len; + + fprintf(diag, + "\rWrote %saddress 0x%08x (%.2f%%) ", + verify ? "and verified " : "", + addr, + (100.0f / size) * offset + ); + fflush(diag); + + } + + fprintf(diag, "Done.\n"); + ret = 0; + goto close; + } else if (action == ACT_CRC) { + uint32_t crc_val = 0; + + fprintf(diag, "CRC computation\n"); + + s_err = stm32_crc_wrapper(stm, start, end - start, &crc_val); + if (s_err != STM32_ERR_OK) { + fprintf(stderr, "Failed to read CRC\n"); + goto close; + } + fprintf(diag, "CRC(0x%08x-0x%08x) = 0x%08x\n", start, end, + crc_val); + ret = 0; + goto close; + } else + ret = 0; + +close: + if (stm && exec_flag && ret == 0) { + if (execute == 0) + execute = stm->dev->fl_start; + + fprintf(diag, "\nStarting execution at address 0x%08x... ", execute); + fflush(diag); + if (stm32_go(stm, execute) == STM32_ERR_OK) { + reset_flag = 0; + fprintf(diag, "done.\n"); + } else + fprintf(diag, "failed.\n"); + } + + if (stm && reset_flag) { + fprintf(diag, "\nResetting device... "); + fflush(diag); + if (init_bl_exit(stm, port, gpio_seq)) + fprintf(diag, "done.\n"); + else fprintf(diag, "failed.\n"); + } + + if (p_st ) parser->close(p_st); + if (stm ) stm32_close (stm); + if (port) + port->close(port); + + fprintf(diag, "\n"); + return ret; +} + +int parse_options(int argc, char *argv[]) +{ + int c; + char *pLen; + + while ((c = getopt(argc, argv, "a:b:m:r:w:e:vn:g:EjkfcChuos:S:F:i:R")) != -1) { + switch(c) { + case 'a': + port_opts.bus_addr = strtoul(optarg, NULL, 0); + break; + + case 'b': + port_opts.baudRate = serial_get_baud(strtoul(optarg, NULL, 0)); + if (port_opts.baudRate == SERIAL_BAUD_INVALID) { + serial_baud_t baudrate; + fprintf(stderr, "Invalid baud rate, valid options are:\n"); + for (baudrate = SERIAL_BAUD_1200; baudrate != SERIAL_BAUD_INVALID; ++baudrate) + fprintf(stderr, " %d\n", serial_get_baud_int(baudrate)); + return 1; + } + break; + + case 'm': + if (strlen(optarg) != 3 + || serial_get_bits(optarg) == SERIAL_BITS_INVALID + || serial_get_parity(optarg) == SERIAL_PARITY_INVALID + || serial_get_stopbit(optarg) == SERIAL_STOPBIT_INVALID) { + fprintf(stderr, "Invalid serial mode\n"); + return 1; + } + port_opts.serial_mode = optarg; + break; + + case 'r': + case 'w': + if (action != ACT_NONE) { + err_multi_action((c == 'r') ? ACT_READ : ACT_WRITE); + return 1; + } + action = (c == 'r') ? ACT_READ : ACT_WRITE; + filename = optarg; + if (filename[0] == '-') { + force_binary = 1; + } + break; + case 'e': + if (readwrite_len || start_addr) { + fprintf(stderr, "ERROR: Invalid options, can't specify start page / num pages and start address/length\n"); + return 1; + } + npages = strtoul(optarg, NULL, 0); + /* + if (npages > 0xFF || npages < 0) { + fprintf(stderr, "ERROR: You need to specify a page count between 0 and 255"); + return 1; + } + */ + if (!npages) + no_erase = 1; + break; + case 'E': + /* erase necessary pages only */ + erase_necessary = 1; + break; + case 'u': + if (action != ACT_NONE) { + err_multi_action(ACT_WRITE_UNPROTECT); + return 1; + } + action = ACT_WRITE_UNPROTECT; + break; + + case 'j': + if (action != ACT_NONE) { + err_multi_action(ACT_READ_PROTECT); + return 1; + } + action = ACT_READ_PROTECT; + break; + + case 'k': + if (action != ACT_NONE) { + err_multi_action(ACT_READ_UNPROTECT); + return 1; + } + action = ACT_READ_UNPROTECT; + break; + + case 'o': + if (action != ACT_NONE) { + err_multi_action(ACT_ERASE_ONLY); + return 1; + } + action = ACT_ERASE_ONLY; + break; + + case 'v': + verify = 1; + break; + + case 'n': + retry = strtoul(optarg, NULL, 0); + break; + + case 'g': + exec_flag = 1; + execute = strtoul(optarg, NULL, 0); + if (execute % 4 != 0) { + fprintf(stderr, "ERROR: Execution address must be word-aligned\n"); + return 1; + } + break; + case 's': + if (readwrite_len || start_addr) { + fprintf(stderr, "ERROR: Invalid options, can't specify start page / num pages and start address/length\n"); + return 1; + } + spage = strtoul(optarg, NULL, 0); + break; + case 'S': + if (spage || npages) { + fprintf(stderr, "ERROR: Invalid options, can't specify start page / num pages and start address/length\n"); + return 1; + } else { + start_addr = strtoul(optarg, &pLen, 0); + if (*pLen == ':') { + pLen++; + readwrite_len = strtoul(pLen, NULL, 0); + if (readwrite_len == 0) { + fprintf(stderr, "ERROR: Invalid options, can't specify zero length\n"); + return 1; + } + } + } + break; + case 'F': + port_opts.rx_frame_max = strtoul(optarg, &pLen, 0); + if (*pLen == ':') { + pLen++; + port_opts.tx_frame_max = strtoul(pLen, NULL, 0); + } + if (port_opts.rx_frame_max < 0 + || port_opts.tx_frame_max < 0) { + fprintf(stderr, "ERROR: Invalid negative value for option -F\n"); + return 1; + } + if (port_opts.rx_frame_max == 0) + port_opts.rx_frame_max = STM32_MAX_RX_FRAME; + if (port_opts.tx_frame_max == 0) + port_opts.tx_frame_max = STM32_MAX_TX_FRAME; + if (port_opts.rx_frame_max < 20 + || port_opts.tx_frame_max < 6) { + fprintf(stderr, "ERROR: current code cannot work with small frames.\n"); + fprintf(stderr, "min(RX) = 20, min(TX) = 6\n"); + return 1; + } + if (port_opts.rx_frame_max > STM32_MAX_RX_FRAME) { + fprintf(stderr, "WARNING: Ignore RX length in option -F\n"); + port_opts.rx_frame_max = STM32_MAX_RX_FRAME; + } + if (port_opts.tx_frame_max > STM32_MAX_TX_FRAME) { + fprintf(stderr, "WARNING: Ignore TX length in option -F\n"); + port_opts.tx_frame_max = STM32_MAX_TX_FRAME; + } + break; + case 'f': + force_binary = 1; + break; + + case 'c': + init_flag = 0; + break; + + case 'h': + show_help(argv[0]); + exit(0); + + case 'i': + gpio_seq = optarg; + break; + + case 'R': + reset_flag = 1; + break; + + case 'C': + if (action != ACT_NONE) { + err_multi_action(ACT_CRC); + return 1; + } + action = ACT_CRC; + break; + } + } + + for (c = optind; c < argc; ++c) { + if (port_opts.device) { + fprintf(stderr, "ERROR: Invalid parameter specified\n"); + show_help(argv[0]); + return 1; + } + port_opts.device = argv[c]; + } + + if (port_opts.device == NULL) { + fprintf(stderr, "ERROR: Device not specified\n"); + show_help(argv[0]); + return 1; + } + + if ((action != ACT_WRITE) && verify) { + fprintf(stderr, "ERROR: Invalid usage, -v is only valid when writing\n"); + show_help(argv[0]); + return 1; + } + + return 0; +} + +void show_help(char *name) { + fprintf(stderr, + "Usage: %s [-bvngfhc] [-[rw] filename] [tty_device | i2c_device]\n" + " -a bus_address Bus address (e.g. for I2C port)\n" + " -b rate Baud rate (default 57600)\n" + " -m mode Serial port mode (default 8e1)\n" + " -r filename Read flash to file (or - stdout)\n" + " -w filename Write flash from file (or - stdout)\n" + " -C Compute CRC of flash content\n" + " -u Disable the flash write-protection\n" + " -j Enable the flash read-protection\n" + " -k Disable the flash read-protection\n" + " -o Erase only\n" + " -e n Only erase n pages before writing the flash\n" + " -E Erase necessary pages only\n" + " -v Verify writes\n" + " -n count Retry failed writes up to count times (default 10)\n" + " -g address Start execution at specified address (0 = flash start)\n" + " -S address[:length] Specify start address and optionally length for\n" + " read/write/erase operations\n" + " -F RX_length[:TX_length] Specify the max length of RX and TX frame\n" + " -s start_page Flash at specified page (0 = flash start)\n" + " -f Force binary parser\n" + " -h Show this help\n" + " -c Resume the connection (don't send initial INIT)\n" + " *Baud rate must be kept the same as the first init*\n" + " This is useful if the reset fails\n" + " -i GPIO_string GPIO sequence to enter/exit bootloader mode\n" + " GPIO_string=[entry_seq][:[exit_seq]]\n" + " sequence=[-]n[,sequence]\n" + " -R Reset device at exit.\n" + "\n" + "Examples:\n" + " Get device information:\n" + " %s /dev/ttyS0\n" + " or:\n" + " %s /dev/i2c-0\n" + "\n" + " Write with verify and then start execution:\n" + " %s -w filename -v -g 0x0 /dev/ttyS0\n" + "\n" + " Read flash to file:\n" + " %s -r filename /dev/ttyS0\n" + "\n" + " Read 100 bytes of flash from 0x1000 to stdout:\n" + " %s -r - -S 0x1000:100 /dev/ttyS0\n" + "\n" + " Start execution:\n" + " %s -g 0x0 /dev/ttyS0\n" + "\n" + " GPIO sequence:\n" + " - entry sequence: GPIO_3=low, GPIO_2=low, GPIO_2=high\n" + " - exit sequence: GPIO_3=high, GPIO_2=low, GPIO_2=high\n" + " %s -R -i -3,-2,2:3,-2,2 /dev/ttyS0\n", + name, + name, + name, + name, + name, + name, + name, + name + ); +} + diff --git a/stm32flash_src/parsers/Android.mk b/stm32flash_src/parsers/Android.mk new file mode 100644 index 0000000..afec18c --- /dev/null +++ b/stm32flash_src/parsers/Android.mk @@ -0,0 +1,6 @@ +LOCAL_PATH := $(call my-dir) + +include $(CLEAR_VARS) +LOCAL_MODULE := libparsers +LOCAL_SRC_FILES := binary.c hex.c +include $(BUILD_STATIC_LIBRARY) diff --git a/stm32flash_src/parsers/Makefile b/stm32flash_src/parsers/Makefile new file mode 100644 index 0000000..bb7df1e --- /dev/null +++ b/stm32flash_src/parsers/Makefile @@ -0,0 +1,12 @@ + +CFLAGS += -Wall -g + +all: parsers.a + +parsers.a: binary.o hex.o + $(AR) rc $@ binary.o hex.o + +clean: + rm -f *.o parsers.a + +.PHONY: all clean diff --git a/stm32flash_src/parsers/binary.c b/stm32flash_src/parsers/binary.c new file mode 100644 index 0000000..f491952 --- /dev/null +++ b/stm32flash_src/parsers/binary.c @@ -0,0 +1,140 @@ +/* + stm32flash - Open Source ST STM32 flash program for *nix + Copyright (C) 2010 Geoffrey McRae + + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public License + as published by the Free Software Foundation; either version 2 + of the License, or (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. +*/ + + +#include +#include +#include +#include +#include + +#include "binary.h" + +typedef struct { + int fd; + char write; + struct stat stat; +} binary_t; + +void* binary_init() { + return calloc(sizeof(binary_t), 1); +} + +parser_err_t binary_open(void *storage, const char *filename, const char write) { + binary_t *st = storage; + if (write) { + if (filename[0] == '-') + st->fd = 1; + else + st->fd = open( + filename, +#ifndef __WIN32__ + O_WRONLY | O_CREAT | O_TRUNC, +#else + O_WRONLY | O_CREAT | O_TRUNC | O_BINARY, +#endif +#ifndef __WIN32__ + S_IRUSR | S_IWUSR | S_IRGRP | S_IROTH +#else + 0 +#endif + ); + st->stat.st_size = 0; + } else { + if (filename[0] == '-') { + st->fd = 0; + } else { + if (stat(filename, &st->stat) != 0) + return PARSER_ERR_INVALID_FILE; + st->fd = open(filename, +#ifndef __WIN32__ + O_RDONLY +#else + O_RDONLY | O_BINARY +#endif + ); + } + } + + st->write = write; + return st->fd == -1 ? PARSER_ERR_SYSTEM : PARSER_ERR_OK; +} + +parser_err_t binary_close(void *storage) { + binary_t *st = storage; + + if (st->fd) close(st->fd); + free(st); + return PARSER_ERR_OK; +} + +unsigned int binary_size(void *storage) { + binary_t *st = storage; + return st->stat.st_size; +} + +parser_err_t binary_read(void *storage, void *data, unsigned int *len) { + binary_t *st = storage; + unsigned int left = *len; + if (st->write) return PARSER_ERR_WRONLY; + + ssize_t r; + while(left > 0) { + r = read(st->fd, data, left); + /* If there is no data to read at all, return OK, but with zero read */ + if (r == 0 && left == *len) { + *len = 0; + return PARSER_ERR_OK; + } + if (r <= 0) return PARSER_ERR_SYSTEM; + left -= r; + data += r; + } + + *len = *len - left; + return PARSER_ERR_OK; +} + +parser_err_t binary_write(void *storage, void *data, unsigned int len) { + binary_t *st = storage; + if (!st->write) return PARSER_ERR_RDONLY; + + ssize_t r; + while(len > 0) { + r = write(st->fd, data, len); + if (r < 1) return PARSER_ERR_SYSTEM; + st->stat.st_size += r; + + len -= r; + data += r; + } + + return PARSER_ERR_OK; +} + +parser_t PARSER_BINARY = { + "Raw BINARY", + binary_init, + binary_open, + binary_close, + binary_size, + binary_read, + binary_write +}; + diff --git a/stm32flash_src/parsers/binary.h b/stm32flash_src/parsers/binary.h new file mode 100644 index 0000000..d989acf --- /dev/null +++ b/stm32flash_src/parsers/binary.h @@ -0,0 +1,27 @@ +/* + stm32flash - Open Source ST STM32 flash program for *nix + Copyright (C) 2010 Geoffrey McRae + + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public License + as published by the Free Software Foundation; either version 2 + of the License, or (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. +*/ + + +#ifndef _PARSER_BINARY_H +#define _PARSER_BINARY_H + +#include "parser.h" + +extern parser_t PARSER_BINARY; +#endif diff --git a/stm32flash_src/parsers/hex.c b/stm32flash_src/parsers/hex.c new file mode 100644 index 0000000..1c92ea4 --- /dev/null +++ b/stm32flash_src/parsers/hex.c @@ -0,0 +1,229 @@ +/* + stm32flash - Open Source ST STM32 flash program for *nix + Copyright (C) 2010 Geoffrey McRae + + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public License + as published by the Free Software Foundation; either version 2 + of the License, or (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. +*/ + + +#include +#include +#include +#include +#include +#include +#include + +#include "hex.h" +#include "../utils.h" + +typedef struct { + size_t data_len, offset; + uint8_t *data; + uint32_t base; +} hex_t; + +void* hex_init() { + return calloc(sizeof(hex_t), 1); +} + +parser_err_t hex_open(void *storage, const char *filename, const char write) { + hex_t *st = storage; + if (write) { + return PARSER_ERR_RDONLY; + } else { + char mark; + int i, fd; + uint8_t checksum; + unsigned int c; + uint32_t base = 0; + unsigned int last_address = 0x0; + + fd = open(filename, O_RDONLY); + if (fd < 0) + return PARSER_ERR_SYSTEM; + + /* read in the file */ + + while(read(fd, &mark, 1) != 0) { + if (mark == '\n' || mark == '\r') continue; + if (mark != ':') + return PARSER_ERR_INVALID_FILE; + + char buffer[9]; + unsigned int reclen, address, type; + uint8_t *record = NULL; + + /* get the reclen, address, and type */ + buffer[8] = 0; + if (read(fd, &buffer, 8) != 8) return PARSER_ERR_INVALID_FILE; + if (sscanf(buffer, "%2x%4x%2x", &reclen, &address, &type) != 3) { + close(fd); + return PARSER_ERR_INVALID_FILE; + } + + /* setup the checksum */ + checksum = + reclen + + ((address & 0xFF00) >> 8) + + ((address & 0x00FF) >> 0) + + type; + + switch(type) { + /* data record */ + case 0: + c = address - last_address; + st->data = realloc(st->data, st->data_len + c + reclen); + + /* if there is a gap, set it to 0xff and increment the length */ + if (c > 0) { + memset(&st->data[st->data_len], 0xff, c); + st->data_len += c; + } + + last_address = address + reclen; + record = &st->data[st->data_len]; + st->data_len += reclen; + break; + + /* extended segment address record */ + case 2: + base = 0; + break; + + /* extended linear address record */ + case 4: + base = 0; + break; + } + + buffer[2] = 0; + for(i = 0; i < reclen; ++i) { + if (read(fd, &buffer, 2) != 2 || sscanf(buffer, "%2x", &c) != 1) { + close(fd); + return PARSER_ERR_INVALID_FILE; + } + + /* add the byte to the checksum */ + checksum += c; + + switch(type) { + case 0: + if (record != NULL) { + record[i] = c; + } else { + return PARSER_ERR_INVALID_FILE; + } + break; + + case 2: + case 4: + base = (base << 8) | c; + break; + } + } + + /* read, scan, and verify the checksum */ + if ( + read(fd, &buffer, 2 ) != 2 || + sscanf(buffer, "%2x", &c) != 1 || + (uint8_t)(checksum + c) != 0x00 + ) { + close(fd); + return PARSER_ERR_INVALID_FILE; + } + + switch(type) { + /* EOF */ + case 1: + close(fd); + return PARSER_ERR_OK; + + /* address record */ + case 4: base = base << 12; + case 2: base = base << 4; + /* Reset last_address since our base changed */ + last_address = 0; + + /* Only assign the program's base address once, and only + * do so if we haven't seen any data records yet. + * If there are any data records before address records, + * the program's base address must be zero. + */ + if (st->base == 0 && st->data_len == 0) { + st->base = base; + break; + } + + /* we cant cope with files out of order */ + if (base < st->base) { + close(fd); + return PARSER_ERR_INVALID_FILE; + } + + /* if there is a gap, enlarge and fill with 0xff */ + unsigned int len = base - st->base; + if (len > st->data_len) { + st->data = realloc(st->data, len); + memset(&st->data[st->data_len], 0xff, len - st->data_len); + st->data_len = len; + } + break; + } + } + + close(fd); + return PARSER_ERR_OK; + } +} + +parser_err_t hex_close(void *storage) { + hex_t *st = storage; + if (st) free(st->data); + free(st); + return PARSER_ERR_OK; +} + +unsigned int hex_size(void *storage) { + hex_t *st = storage; + return st->data_len; +} + +parser_err_t hex_read(void *storage, void *data, unsigned int *len) { + hex_t *st = storage; + unsigned int left = st->data_len - st->offset; + unsigned int get = left > *len ? *len : left; + + memcpy(data, &st->data[st->offset], get); + st->offset += get; + + *len = get; + return PARSER_ERR_OK; +} + +parser_err_t hex_write(void *storage, void *data, unsigned int len) { + return PARSER_ERR_RDONLY; +} + +parser_t PARSER_HEX = { + "Intel HEX", + hex_init, + hex_open, + hex_close, + hex_size, + hex_read, + hex_write +}; + diff --git a/stm32flash_src/parsers/hex.h b/stm32flash_src/parsers/hex.h new file mode 100644 index 0000000..02413c9 --- /dev/null +++ b/stm32flash_src/parsers/hex.h @@ -0,0 +1,27 @@ +/* + stm32flash - Open Source ST STM32 flash program for *nix + Copyright (C) 2010 Geoffrey McRae + + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public License + as published by the Free Software Foundation; either version 2 + of the License, or (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. +*/ + + +#ifndef _PARSER_HEX_H +#define _PARSER_HEX_H + +#include "parser.h" + +extern parser_t PARSER_HEX; +#endif diff --git a/stm32flash_src/parsers/parser.h b/stm32flash_src/parsers/parser.h new file mode 100644 index 0000000..c2fae3c --- /dev/null +++ b/stm32flash_src/parsers/parser.h @@ -0,0 +1,56 @@ +/* + stm32flash - Open Source ST STM32 flash program for *nix + Copyright (C) 2010 Geoffrey McRae + + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public License + as published by the Free Software Foundation; either version 2 + of the License, or (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. +*/ + + +#ifndef _H_PARSER +#define _H_PARSER + +enum parser_err { + PARSER_ERR_OK, + PARSER_ERR_SYSTEM, + PARSER_ERR_INVALID_FILE, + PARSER_ERR_WRONLY, + PARSER_ERR_RDONLY +}; +typedef enum parser_err parser_err_t; + +struct parser { + const char *name; + void* (*init )(); /* initialise the parser */ + parser_err_t (*open )(void *storage, const char *filename, const char write); /* open the file for read|write */ + parser_err_t (*close)(void *storage); /* close and free the parser */ + unsigned int (*size )(void *storage); /* get the total data size */ + parser_err_t (*read )(void *storage, void *data, unsigned int *len); /* read a block of data */ + parser_err_t (*write)(void *storage, void *data, unsigned int len); /* write a block of data */ +}; +typedef struct parser parser_t; + +static inline const char* parser_errstr(parser_err_t err) { + switch(err) { + case PARSER_ERR_OK : return "OK"; + case PARSER_ERR_SYSTEM : return "System Error"; + case PARSER_ERR_INVALID_FILE: return "Invalid File"; + case PARSER_ERR_WRONLY : return "Parser can only write"; + case PARSER_ERR_RDONLY : return "Parser can only read"; + default: + return "Unknown Error"; + } +} + +#endif diff --git a/stm32flash_src/port.c b/stm32flash_src/port.c new file mode 100644 index 0000000..08e58cc --- /dev/null +++ b/stm32flash_src/port.c @@ -0,0 +1,59 @@ +/* + stm32flash - Open Source ST STM32 flash program for *nix + Copyright (C) 2014 Antonio Borneo + + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public License + as published by the Free Software Foundation; either version 2 + of the License, or (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. +*/ + +#include +#include + +#include "serial.h" +#include "port.h" + + +extern struct port_interface port_serial; +extern struct port_interface port_i2c; + +static struct port_interface *ports[] = { + &port_serial, + &port_i2c, + NULL, +}; + + +port_err_t port_open(struct port_options *ops, struct port_interface **outport) +{ + int ret; + static struct port_interface **port; + + for (port = ports; *port; port++) { + ret = (*port)->open(*port, ops); + if (ret == PORT_ERR_NODEV) + continue; + if (ret == PORT_ERR_OK) + break; + fprintf(stderr, "Error probing interface \"%s\"\n", + (*port)->name); + } + if (*port == NULL) { + fprintf(stderr, "Cannot handle device \"%s\"\n", + ops->device); + return PORT_ERR_UNKNOWN; + } + + *outport = *port; + return PORT_ERR_OK; +} diff --git a/stm32flash_src/port.h b/stm32flash_src/port.h new file mode 100644 index 0000000..290f034 --- /dev/null +++ b/stm32flash_src/port.h @@ -0,0 +1,75 @@ +/* + stm32flash - Open Source ST STM32 flash program for *nix + Copyright (C) 2014 Antonio Borneo + + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public License + as published by the Free Software Foundation; either version 2 + of the License, or (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. +*/ + + +#ifndef _H_PORT +#define _H_PORT + +typedef enum { + PORT_ERR_OK = 0, + PORT_ERR_NODEV, /* No such device */ + PORT_ERR_TIMEDOUT, /* Operation timed out */ + PORT_ERR_UNKNOWN, +} port_err_t; + +/* flags */ +#define PORT_BYTE (1 << 0) /* byte (not frame) oriented */ +#define PORT_GVR_ETX (1 << 1) /* cmd GVR returns protection status */ +#define PORT_CMD_INIT (1 << 2) /* use INIT cmd to autodetect speed */ +#define PORT_RETRY (1 << 3) /* allowed read() retry after timeout */ +#define PORT_STRETCH_W (1 << 4) /* warning for no-stretching commands */ + +/* all options and flags used to open and configure an interface */ +struct port_options { + const char *device; + serial_baud_t baudRate; + const char *serial_mode; + int bus_addr; + int rx_frame_max; + int tx_frame_max; +}; + +/* + * Specify the length of reply for command GET + * This is helpful for frame-oriented protocols, e.g. i2c, to avoid time + * consuming try-fail-timeout-retry operation. + * On byte-oriented protocols, i.e. UART, this information would be skipped + * after read the first byte, so not needed. + */ +struct varlen_cmd { + uint8_t version; + uint8_t length; +}; + +struct port_interface { + const char *name; + unsigned flags; + port_err_t (*open)(struct port_interface *port, struct port_options *ops); + port_err_t (*close)(struct port_interface *port); + port_err_t (*read)(struct port_interface *port, void *buf, size_t nbyte); + port_err_t (*write)(struct port_interface *port, void *buf, size_t nbyte); + port_err_t (*gpio)(struct port_interface *port, serial_gpio_t n, int level); + const char *(*get_cfg_str)(struct port_interface *port); + struct varlen_cmd *cmd_get_reply; + void *private; +}; + +port_err_t port_open(struct port_options *ops, struct port_interface **outport); + +#endif diff --git a/stm32flash_src/protocol.txt b/stm32flash_src/protocol.txt new file mode 100644 index 0000000..0391099 --- /dev/null +++ b/stm32flash_src/protocol.txt @@ -0,0 +1,19 @@ +The communication protocol used by ST bootloader is documented in following ST +application notes, depending on communication port. + +In current version of stm32flash are supported only UART and I2C ports. + +* AN3154: CAN protocol used in the STM32 bootloader + http://www.st.com/web/en/resource/technical/document/application_note/CD00264321.pdf + +* AN3155: USART protocol used in the STM32(TM) bootloader + http://www.st.com/web/en/resource/technical/document/application_note/CD00264342.pdf + +* AN4221: I2C protocol used in the STM32 bootloader + http://www.st.com/web/en/resource/technical/document/application_note/DM00072315.pdf + +* AN4286: SPI protocol used in the STM32 bootloader + http://www.st.com/web/en/resource/technical/document/application_note/DM00081379.pdf + +Boot mode selection for STM32 is documented in ST application note AN2606, available in ST website: + http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf diff --git a/stm32flash_src/serial.h b/stm32flash_src/serial.h new file mode 100644 index 0000000..e8120c6 --- /dev/null +++ b/stm32flash_src/serial.h @@ -0,0 +1,91 @@ +/* + stm32flash - Open Source ST STM32 flash program for *nix + Copyright (C) 2010 Geoffrey McRae + + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public License + as published by the Free Software Foundation; either version 2 + of the License, or (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. +*/ + + +#ifndef _SERIAL_H +#define _SERIAL_H + +typedef struct serial serial_t; + +typedef enum { + SERIAL_PARITY_NONE, + SERIAL_PARITY_EVEN, + SERIAL_PARITY_ODD, + + SERIAL_PARITY_INVALID +} serial_parity_t; + +typedef enum { + SERIAL_BITS_5, + SERIAL_BITS_6, + SERIAL_BITS_7, + SERIAL_BITS_8, + + SERIAL_BITS_INVALID +} serial_bits_t; + +typedef enum { + SERIAL_BAUD_1200, + SERIAL_BAUD_1800, + SERIAL_BAUD_2400, + SERIAL_BAUD_4800, + SERIAL_BAUD_9600, + SERIAL_BAUD_19200, + SERIAL_BAUD_38400, + SERIAL_BAUD_57600, + SERIAL_BAUD_115200, + SERIAL_BAUD_128000, + SERIAL_BAUD_230400, + SERIAL_BAUD_256000, + SERIAL_BAUD_460800, + SERIAL_BAUD_500000, + SERIAL_BAUD_576000, + SERIAL_BAUD_921600, + SERIAL_BAUD_1000000, + SERIAL_BAUD_1500000, + SERIAL_BAUD_2000000, + SERIAL_BAUD_3000000, + + SERIAL_BAUD_INVALID +} serial_baud_t; + +typedef enum { + SERIAL_STOPBIT_1, + SERIAL_STOPBIT_2, + + SERIAL_STOPBIT_INVALID +} serial_stopbit_t; + +typedef enum { + GPIO_RTS = 1, + GPIO_DTR, + GPIO_BRK, +} serial_gpio_t; + +/* common helper functions */ +serial_baud_t serial_get_baud(const unsigned int baud); +unsigned int serial_get_baud_int(const serial_baud_t baud); +serial_bits_t serial_get_bits(const char *mode); +unsigned int serial_get_bits_int(const serial_bits_t bits); +serial_parity_t serial_get_parity(const char *mode); +char serial_get_parity_str(const serial_parity_t parity); +serial_stopbit_t serial_get_stopbit(const char *mode); +unsigned int serial_get_stopbit_int(const serial_stopbit_t stopbit); + +#endif diff --git a/stm32flash_src/serial_common.c b/stm32flash_src/serial_common.c new file mode 100644 index 0000000..43e48e1 --- /dev/null +++ b/stm32flash_src/serial_common.c @@ -0,0 +1,154 @@ +/* + stm32flash - Open Source ST STM32 flash program for *nix + Copyright (C) 2010 Geoffrey McRae + + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public License + as published by the Free Software Foundation; either version 2 + of the License, or (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. +*/ + +#include "serial.h" + +serial_baud_t serial_get_baud(const unsigned int baud) { + switch(baud) { + case 1200: return SERIAL_BAUD_1200 ; + case 1800: return SERIAL_BAUD_1800 ; + case 2400: return SERIAL_BAUD_2400 ; + case 4800: return SERIAL_BAUD_4800 ; + case 9600: return SERIAL_BAUD_9600 ; + case 19200: return SERIAL_BAUD_19200 ; + case 38400: return SERIAL_BAUD_38400 ; + case 57600: return SERIAL_BAUD_57600 ; + case 115200: return SERIAL_BAUD_115200; + case 128000: return SERIAL_BAUD_128000; + case 230400: return SERIAL_BAUD_230400; + case 256000: return SERIAL_BAUD_256000; + case 460800: return SERIAL_BAUD_460800; + case 500000: return SERIAL_BAUD_500000; + case 576000: return SERIAL_BAUD_576000; + case 921600: return SERIAL_BAUD_921600; + case 1000000: return SERIAL_BAUD_1000000; + case 1500000: return SERIAL_BAUD_1500000; + case 2000000: return SERIAL_BAUD_2000000; + + default: + return SERIAL_BAUD_INVALID; + } +} + +unsigned int serial_get_baud_int(const serial_baud_t baud) { + switch(baud) { + case SERIAL_BAUD_1200 : return 1200 ; + case SERIAL_BAUD_1800 : return 1800 ; + case SERIAL_BAUD_2400 : return 2400 ; + case SERIAL_BAUD_4800 : return 4800 ; + case SERIAL_BAUD_9600 : return 9600 ; + case SERIAL_BAUD_19200 : return 19200 ; + case SERIAL_BAUD_38400 : return 38400 ; + case SERIAL_BAUD_57600 : return 57600 ; + case SERIAL_BAUD_115200: return 115200; + case SERIAL_BAUD_128000: return 128000; + case SERIAL_BAUD_230400: return 230400; + case SERIAL_BAUD_256000: return 256000; + case SERIAL_BAUD_460800: return 460800; + case SERIAL_BAUD_500000: return 500000; + case SERIAL_BAUD_576000: return 576000; + case SERIAL_BAUD_921600: return 921600; + case SERIAL_BAUD_1000000: return 1000000; + case SERIAL_BAUD_1500000: return 1500000; + case SERIAL_BAUD_2000000: return 2000000; + + case SERIAL_BAUD_INVALID: + default: + return 0; + } +} + +serial_bits_t serial_get_bits(const char *mode) { + if (!mode) + return SERIAL_BITS_INVALID; + switch(mode[0]) { + case '5': return SERIAL_BITS_5; + case '6': return SERIAL_BITS_6; + case '7': return SERIAL_BITS_7; + case '8': return SERIAL_BITS_8; + + default: + return SERIAL_BITS_INVALID; + } +} + +unsigned int serial_get_bits_int(const serial_bits_t bits) { + switch(bits) { + case SERIAL_BITS_5: return 5; + case SERIAL_BITS_6: return 6; + case SERIAL_BITS_7: return 7; + case SERIAL_BITS_8: return 8; + + default: + return 0; + } +} + +serial_parity_t serial_get_parity(const char *mode) { + if (!mode || !mode[0]) + return SERIAL_PARITY_INVALID; + switch(mode[1]) { + case 'N': + case 'n': + return SERIAL_PARITY_NONE; + case 'E': + case 'e': + return SERIAL_PARITY_EVEN; + case 'O': + case 'o': + return SERIAL_PARITY_ODD; + + default: + return SERIAL_PARITY_INVALID; + } +} + +char serial_get_parity_str(const serial_parity_t parity) { + switch(parity) { + case SERIAL_PARITY_NONE: return 'N'; + case SERIAL_PARITY_EVEN: return 'E'; + case SERIAL_PARITY_ODD : return 'O'; + + default: + return ' '; + } +} + +serial_stopbit_t serial_get_stopbit(const char *mode) { + if (!mode || !mode[0] || !mode[1]) + return SERIAL_STOPBIT_INVALID; + switch(mode[2]) { + case '1': return SERIAL_STOPBIT_1; + case '2': return SERIAL_STOPBIT_2; + + default: + return SERIAL_STOPBIT_INVALID; + } +} + +unsigned int serial_get_stopbit_int(const serial_stopbit_t stopbit) { + switch(stopbit) { + case SERIAL_STOPBIT_1: return 1; + case SERIAL_STOPBIT_2: return 2; + + default: + return 0; + } +} + diff --git a/stm32flash_src/serial_platform.c b/stm32flash_src/serial_platform.c new file mode 100644 index 0000000..98e2569 --- /dev/null +++ b/stm32flash_src/serial_platform.c @@ -0,0 +1,5 @@ +#if defined(__WIN32__) || defined(__CYGWIN__) +# include "serial_w32.c" +#else +# include "serial_posix.c" +#endif diff --git a/stm32flash_src/serial_posix.c b/stm32flash_src/serial_posix.c new file mode 100644 index 0000000..ec6694f --- /dev/null +++ b/stm32flash_src/serial_posix.c @@ -0,0 +1,356 @@ +/* + stm32flash - Open Source ST STM32 flash program for *nix + Copyright (C) 2010 Geoffrey McRae + + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public License + as published by the Free Software Foundation; either version 2 + of the License, or (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. +*/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "serial.h" +#include "port.h" + +struct serial { + int fd; + struct termios oldtio; + struct termios newtio; + char setup_str[11]; +}; + +static serial_t *serial_open(const char *device) +{ + serial_t *h = calloc(sizeof(serial_t), 1); + + h->fd = open(device, O_RDWR | O_NOCTTY | O_NDELAY); + if (h->fd < 0) { + free(h); + return NULL; + } + fcntl(h->fd, F_SETFL, 0); + + tcgetattr(h->fd, &h->oldtio); + tcgetattr(h->fd, &h->newtio); + + return h; +} + +static void serial_flush(const serial_t *h) +{ + tcflush(h->fd, TCIFLUSH); +} + +static void serial_close(serial_t *h) +{ + serial_flush(h); + tcsetattr(h->fd, TCSANOW, &h->oldtio); + close(h->fd); + free(h); +} + +static port_err_t serial_setup(serial_t *h, const serial_baud_t baud, + const serial_bits_t bits, + const serial_parity_t parity, + const serial_stopbit_t stopbit) +{ + speed_t port_baud; + tcflag_t port_bits; + tcflag_t port_parity; + tcflag_t port_stop; + struct termios settings; + + switch (baud) { + case SERIAL_BAUD_1200: port_baud = B1200; break; + case SERIAL_BAUD_1800: port_baud = B1800; break; + case SERIAL_BAUD_2400: port_baud = B2400; break; + case SERIAL_BAUD_4800: port_baud = B4800; break; + case SERIAL_BAUD_9600: port_baud = B9600; break; + case SERIAL_BAUD_19200: port_baud = B19200; break; + case SERIAL_BAUD_38400: port_baud = B38400; break; + case SERIAL_BAUD_57600: port_baud = B57600; break; + case SERIAL_BAUD_115200: port_baud = B115200; break; + case SERIAL_BAUD_230400: port_baud = B230400; break; +#ifdef B460800 + case SERIAL_BAUD_460800: port_baud = B460800; break; +#endif /* B460800 */ +#ifdef B921600 + case SERIAL_BAUD_921600: port_baud = B921600; break; +#endif /* B921600 */ +#ifdef B500000 + case SERIAL_BAUD_500000: port_baud = B500000; break; +#endif /* B500000 */ +#ifdef B576000 + case SERIAL_BAUD_576000: port_baud = B576000; break; +#endif /* B576000 */ +#ifdef B1000000 + case SERIAL_BAUD_1000000: port_baud = B1000000; break; +#endif /* B1000000 */ +#ifdef B1500000 + case SERIAL_BAUD_1500000: port_baud = B1500000; break; +#endif /* B1500000 */ +#ifdef B2000000 + case SERIAL_BAUD_2000000: port_baud = B2000000; break; +#endif /* B2000000 */ + + case SERIAL_BAUD_INVALID: + default: + return PORT_ERR_UNKNOWN; + } + + switch (bits) { + case SERIAL_BITS_5: port_bits = CS5; break; + case SERIAL_BITS_6: port_bits = CS6; break; + case SERIAL_BITS_7: port_bits = CS7; break; + case SERIAL_BITS_8: port_bits = CS8; break; + + default: + return PORT_ERR_UNKNOWN; + } + + switch (parity) { + case SERIAL_PARITY_NONE: port_parity = 0; break; + case SERIAL_PARITY_EVEN: port_parity = INPCK | PARENB; break; + case SERIAL_PARITY_ODD: port_parity = INPCK | PARENB | PARODD; break; + + default: + return PORT_ERR_UNKNOWN; + } + + switch (stopbit) { + case SERIAL_STOPBIT_1: port_stop = 0; break; + case SERIAL_STOPBIT_2: port_stop = CSTOPB; break; + + default: + return PORT_ERR_UNKNOWN; + } + + /* reset the settings */ +#ifndef __sun /* Used by GNU and BSD. Ignore __SVR4 in test. */ + cfmakeraw(&h->newtio); +#else /* __sun */ + h->newtio.c_iflag &= ~(IGNBRK | BRKINT | PARMRK | ISTRIP | INLCR + | IGNCR | ICRNL | IXON); + h->newtio.c_oflag &= ~OPOST; + h->newtio.c_lflag &= ~(ECHO | ECHONL | ICANON | ISIG | IEXTEN); + h->newtio.c_cflag &= ~(CSIZE | PARENB); + h->newtio.c_cflag |= CS8; +#endif /* __sun */ +#ifdef __QNXNTO__ + h->newtio.c_cflag &= ~(CSIZE | IHFLOW | OHFLOW); +#else + h->newtio.c_cflag &= ~(CSIZE | CRTSCTS); +#endif + h->newtio.c_cflag &= ~(CSIZE | CRTSCTS); + h->newtio.c_iflag &= ~(IXON | IXOFF | IXANY | IGNPAR); + h->newtio.c_lflag &= ~(ECHOK | ECHOCTL | ECHOKE); + h->newtio.c_oflag &= ~(OPOST | ONLCR); + + /* setup the new settings */ + cfsetispeed(&h->newtio, port_baud); + cfsetospeed(&h->newtio, port_baud); + h->newtio.c_cflag |= + port_parity | + port_bits | + port_stop | + CLOCAL | + CREAD; + + h->newtio.c_cc[VMIN] = 0; + h->newtio.c_cc[VTIME] = 5; /* in units of 0.1 s */ + + /* set the settings */ + serial_flush(h); + if (tcsetattr(h->fd, TCSANOW, &h->newtio) != 0) + return PORT_ERR_UNKNOWN; + + /* confirm they were set */ + tcgetattr(h->fd, &settings); + if (settings.c_iflag != h->newtio.c_iflag || + settings.c_oflag != h->newtio.c_oflag || + settings.c_cflag != h->newtio.c_cflag || + settings.c_lflag != h->newtio.c_lflag) + return PORT_ERR_UNKNOWN; + + snprintf(h->setup_str, sizeof(h->setup_str), "%u %d%c%d", + serial_get_baud_int(baud), + serial_get_bits_int(bits), + serial_get_parity_str(parity), + serial_get_stopbit_int(stopbit)); + return PORT_ERR_OK; +} + +static port_err_t serial_posix_open(struct port_interface *port, + struct port_options *ops) +{ + serial_t *h; + + /* 1. check options */ + if (ops->baudRate == SERIAL_BAUD_INVALID) + return PORT_ERR_UNKNOWN; + if (serial_get_bits(ops->serial_mode) == SERIAL_BITS_INVALID) + return PORT_ERR_UNKNOWN; + if (serial_get_parity(ops->serial_mode) == SERIAL_PARITY_INVALID) + return PORT_ERR_UNKNOWN; + if (serial_get_stopbit(ops->serial_mode) == SERIAL_STOPBIT_INVALID) + return PORT_ERR_UNKNOWN; + + /* 2. open it */ + h = serial_open(ops->device); + if (h == NULL) + return PORT_ERR_UNKNOWN; + + /* 3. check for tty (but only warn) */ + if (!isatty(h->fd)) + fprintf(stderr, "Warning: Not a tty: %s\n", ops->device); + + /* 4. set options */ + if (serial_setup(h, ops->baudRate, + serial_get_bits(ops->serial_mode), + serial_get_parity(ops->serial_mode), + serial_get_stopbit(ops->serial_mode) + ) != PORT_ERR_OK) { + serial_close(h); + return PORT_ERR_UNKNOWN; + } + + port->private = h; + return PORT_ERR_OK; +} + +static port_err_t serial_posix_close(struct port_interface *port) +{ + serial_t *h; + + h = (serial_t *)port->private; + if (h == NULL) + return PORT_ERR_UNKNOWN; + + serial_close(h); + port->private = NULL; + return PORT_ERR_OK; +} + +static port_err_t serial_posix_read(struct port_interface *port, void *buf, + size_t nbyte) +{ + serial_t *h; + ssize_t r; + uint8_t *pos = (uint8_t *)buf; + + h = (serial_t *)port->private; + if (h == NULL) + return PORT_ERR_UNKNOWN; + + while (nbyte) { + r = read(h->fd, pos, nbyte); + if (r == 0) + return PORT_ERR_TIMEDOUT; + if (r < 0) + return PORT_ERR_UNKNOWN; + + nbyte -= r; + pos += r; + } + return PORT_ERR_OK; +} + +static port_err_t serial_posix_write(struct port_interface *port, void *buf, + size_t nbyte) +{ + serial_t *h; + ssize_t r; + const uint8_t *pos = (const uint8_t *)buf; + + h = (serial_t *)port->private; + if (h == NULL) + return PORT_ERR_UNKNOWN; + + while (nbyte) { + r = write(h->fd, pos, nbyte); + if (r < 1) + return PORT_ERR_UNKNOWN; + + nbyte -= r; + pos += r; + } + return PORT_ERR_OK; +} + +static port_err_t serial_posix_gpio(struct port_interface *port, + serial_gpio_t n, int level) +{ + serial_t *h; + int bit, lines; + + h = (serial_t *)port->private; + if (h == NULL) + return PORT_ERR_UNKNOWN; + + switch (n) { + case GPIO_RTS: + bit = TIOCM_RTS; + break; + + case GPIO_DTR: + bit = TIOCM_DTR; + break; + + case GPIO_BRK: + if (level == 0) + return PORT_ERR_OK; + if (tcsendbreak(h->fd, 1)) + return PORT_ERR_UNKNOWN; + return PORT_ERR_OK; + + default: + return PORT_ERR_UNKNOWN; + } + + /* handle RTS/DTR */ + if (ioctl(h->fd, TIOCMGET, &lines)) + return PORT_ERR_UNKNOWN; + lines = level ? lines | bit : lines & ~bit; + if (ioctl(h->fd, TIOCMSET, &lines)) + return PORT_ERR_UNKNOWN; + + return PORT_ERR_OK; +} + +static const char *serial_posix_get_cfg_str(struct port_interface *port) +{ + serial_t *h; + + h = (serial_t *)port->private; + return h ? h->setup_str : "INVALID"; +} + +struct port_interface port_serial = { + .name = "serial_posix", + .flags = PORT_BYTE | PORT_GVR_ETX | PORT_CMD_INIT | PORT_RETRY, + .open = serial_posix_open, + .close = serial_posix_close, + .read = serial_posix_read, + .write = serial_posix_write, + .gpio = serial_posix_gpio, + .get_cfg_str = serial_posix_get_cfg_str, +}; diff --git a/stm32flash_src/serial_w32.c b/stm32flash_src/serial_w32.c new file mode 100644 index 0000000..a40b625 --- /dev/null +++ b/stm32flash_src/serial_w32.c @@ -0,0 +1,350 @@ +/* + stm32flash - Open Source ST STM32 flash program for *nix + Copyright (C) 2010 Geoffrey McRae + Copyright (C) 2010 Gareth McMullin + + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public License + as published by the Free Software Foundation; either version 2 + of the License, or (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. +*/ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include "serial.h" +#include "port.h" + +struct serial { + HANDLE fd; + DCB oldtio; + DCB newtio; + char setup_str[11]; +}; + +static serial_t *serial_open(const char *device) +{ + serial_t *h = calloc(sizeof(serial_t), 1); + char *devName; + + /* timeout in ms */ + COMMTIMEOUTS timeouts = {MAXDWORD, MAXDWORD, 500, 0, 0}; + + /* Fix the device name if required */ + if (strlen(device) > 4 && device[0] != '\\') { + devName = calloc(1, strlen(device) + 5); + sprintf(devName, "\\\\.\\%s", device); + } else { + devName = (char *)device; + } + + /* Create file handle for port */ + h->fd = CreateFile(devName, GENERIC_READ | GENERIC_WRITE, + 0, /* Exclusive access */ + NULL, /* No security */ + OPEN_EXISTING, + 0, /* No overlap */ + NULL); + + if (devName != device) + free(devName); + + if (h->fd == INVALID_HANDLE_VALUE) { + if (GetLastError() == ERROR_FILE_NOT_FOUND) + fprintf(stderr, "File not found: %s\n", device); + free(h); + return NULL; + } + + SetupComm(h->fd, 4096, 4096); /* Set input and output buffer size */ + + SetCommTimeouts(h->fd, &timeouts); + + SetCommMask(h->fd, EV_ERR); /* Notify us of error events */ + + /* DCBlength should be initialized before calling GetCommState */ + h->oldtio.DCBlength = sizeof(DCB); + h->newtio.DCBlength = sizeof(DCB); + GetCommState(h->fd, &h->oldtio); /* Retrieve port parameters */ + GetCommState(h->fd, &h->newtio); /* Retrieve port parameters */ + + /* PurgeComm(h->fd, PURGE_RXABORT | PURGE_TXCLEAR | PURGE_TXABORT | PURGE_TXCLEAR); */ + + return h; +} + +static void serial_flush(const serial_t *h) +{ + /* We shouldn't need to flush in non-overlapping (blocking) mode */ + /* tcflush(h->fd, TCIFLUSH); */ +} + +static void serial_close(serial_t *h) +{ + serial_flush(h); + SetCommState(h->fd, &h->oldtio); + CloseHandle(h->fd); + free(h); +} + +static port_err_t serial_setup(serial_t *h, + const serial_baud_t baud, + const serial_bits_t bits, + const serial_parity_t parity, + const serial_stopbit_t stopbit) +{ + switch (baud) { + case SERIAL_BAUD_1200: h->newtio.BaudRate = CBR_1200; break; + /* case SERIAL_BAUD_1800: h->newtio.BaudRate = CBR_1800; break; */ + case SERIAL_BAUD_2400: h->newtio.BaudRate = CBR_2400; break; + case SERIAL_BAUD_4800: h->newtio.BaudRate = CBR_4800; break; + case SERIAL_BAUD_9600: h->newtio.BaudRate = CBR_9600; break; + case SERIAL_BAUD_19200: h->newtio.BaudRate = CBR_19200; break; + case SERIAL_BAUD_38400: h->newtio.BaudRate = CBR_38400; break; + case SERIAL_BAUD_57600: h->newtio.BaudRate = CBR_57600; break; + case SERIAL_BAUD_115200: h->newtio.BaudRate = CBR_115200; break; + case SERIAL_BAUD_128000: h->newtio.BaudRate = CBR_128000; break; + case SERIAL_BAUD_256000: h->newtio.BaudRate = CBR_256000; break; + /* These are not defined in WinBase.h and might work or not */ + case SERIAL_BAUD_230400: h->newtio.BaudRate = 230400; break; + case SERIAL_BAUD_460800: h->newtio.BaudRate = 460800; break; + case SERIAL_BAUD_500000: h->newtio.BaudRate = 500000; break; + case SERIAL_BAUD_576000: h->newtio.BaudRate = 576000; break; + case SERIAL_BAUD_921600: h->newtio.BaudRate = 921600; break; + case SERIAL_BAUD_1000000: h->newtio.BaudRate = 1000000; break; + case SERIAL_BAUD_1500000: h->newtio.BaudRate = 1500000; break; + case SERIAL_BAUD_2000000: h->newtio.BaudRate = 2000000; break; + case SERIAL_BAUD_3000000: h->newtio.BaudRate = 3000000; break; + case SERIAL_BAUD_INVALID: + + default: + return PORT_ERR_UNKNOWN; + } + + switch (bits) { + case SERIAL_BITS_5: h->newtio.ByteSize = 5; break; + case SERIAL_BITS_6: h->newtio.ByteSize = 6; break; + case SERIAL_BITS_7: h->newtio.ByteSize = 7; break; + case SERIAL_BITS_8: h->newtio.ByteSize = 8; break; + + default: + return PORT_ERR_UNKNOWN; + } + + switch (parity) { + case SERIAL_PARITY_NONE: h->newtio.Parity = NOPARITY; break; + case SERIAL_PARITY_EVEN: h->newtio.Parity = EVENPARITY; break; + case SERIAL_PARITY_ODD: h->newtio.Parity = ODDPARITY; break; + + default: + return PORT_ERR_UNKNOWN; + } + + switch (stopbit) { + case SERIAL_STOPBIT_1: h->newtio.StopBits = ONESTOPBIT; break; + case SERIAL_STOPBIT_2: h->newtio.StopBits = TWOSTOPBITS; break; + + default: + return PORT_ERR_UNKNOWN; + } + + /* reset the settings */ + h->newtio.fOutxCtsFlow = FALSE; + h->newtio.fOutxDsrFlow = FALSE; + h->newtio.fDtrControl = DTR_CONTROL_DISABLE; + h->newtio.fDsrSensitivity = FALSE; + h->newtio.fTXContinueOnXoff = FALSE; + h->newtio.fOutX = FALSE; + h->newtio.fInX = FALSE; + h->newtio.fErrorChar = FALSE; + h->newtio.fNull = FALSE; + h->newtio.fRtsControl = RTS_CONTROL_DISABLE; + h->newtio.fAbortOnError = FALSE; + + /* set the settings */ + serial_flush(h); + if (!SetCommState(h->fd, &h->newtio)) + return PORT_ERR_UNKNOWN; + + snprintf(h->setup_str, sizeof(h->setup_str), "%u %d%c%d", + serial_get_baud_int(baud), + serial_get_bits_int(bits), + serial_get_parity_str(parity), + serial_get_stopbit_int(stopbit) + ); + return PORT_ERR_OK; +} + +static port_err_t serial_w32_open(struct port_interface *port, + struct port_options *ops) +{ + serial_t *h; + + /* 1. check device name match */ + if (!(!strncmp(ops->device, "COM", 3) && isdigit(ops->device[3])) + && !(!strncmp(ops->device, "\\\\.\\COM", strlen("\\\\.\\COM")) + && isdigit(ops->device[strlen("\\\\.\\COM")]))) + return PORT_ERR_NODEV; + + /* 2. check options */ + if (ops->baudRate == SERIAL_BAUD_INVALID) + return PORT_ERR_UNKNOWN; + if (serial_get_bits(ops->serial_mode) == SERIAL_BITS_INVALID) + return PORT_ERR_UNKNOWN; + if (serial_get_parity(ops->serial_mode) == SERIAL_PARITY_INVALID) + return PORT_ERR_UNKNOWN; + if (serial_get_stopbit(ops->serial_mode) == SERIAL_STOPBIT_INVALID) + return PORT_ERR_UNKNOWN; + + /* 3. open it */ + h = serial_open(ops->device); + if (h == NULL) + return PORT_ERR_UNKNOWN; + + /* 4. set options */ + if (serial_setup(h, ops->baudRate, + serial_get_bits(ops->serial_mode), + serial_get_parity(ops->serial_mode), + serial_get_stopbit(ops->serial_mode) + ) != PORT_ERR_OK) { + serial_close(h); + return PORT_ERR_UNKNOWN; + } + + port->private = h; + return PORT_ERR_OK; +} + +static port_err_t serial_w32_close(struct port_interface *port) +{ + serial_t *h; + + h = (serial_t *)port->private; + if (h == NULL) + return PORT_ERR_UNKNOWN; + + serial_close(h); + port->private = NULL; + return PORT_ERR_OK; +} + +static port_err_t serial_w32_read(struct port_interface *port, void *buf, + size_t nbyte) +{ + serial_t *h; + DWORD r; + uint8_t *pos = (uint8_t *)buf; + + h = (serial_t *)port->private; + if (h == NULL) + return PORT_ERR_UNKNOWN; + + while (nbyte) { + ReadFile(h->fd, pos, nbyte, &r, NULL); + if (r == 0) + return PORT_ERR_TIMEDOUT; + if (r < 0) + return PORT_ERR_UNKNOWN; + + nbyte -= r; + pos += r; + } + return PORT_ERR_OK; +} + +static port_err_t serial_w32_write(struct port_interface *port, void *buf, + size_t nbyte) +{ + serial_t *h; + DWORD r; + uint8_t *pos = (uint8_t *)buf; + + h = (serial_t *)port->private; + if (h == NULL) + return PORT_ERR_UNKNOWN; + + while (nbyte) { + if (!WriteFile(h->fd, pos, nbyte, &r, NULL)) + return PORT_ERR_UNKNOWN; + if (r < 1) + return PORT_ERR_UNKNOWN; + + nbyte -= r; + pos += r; + } + return PORT_ERR_OK; +} + +static port_err_t serial_w32_gpio(struct port_interface *port, + serial_gpio_t n, int level) +{ + serial_t *h; + int bit; + + h = (serial_t *)port->private; + if (h == NULL) + return PORT_ERR_UNKNOWN; + + switch (n) { + case GPIO_RTS: + bit = level ? SETRTS : CLRRTS; + break; + + case GPIO_DTR: + bit = level ? SETDTR : CLRDTR; + break; + + case GPIO_BRK: + if (level == 0) + return PORT_ERR_OK; + if (EscapeCommFunction(h->fd, SETBREAK) == 0) + return PORT_ERR_UNKNOWN; + usleep(500000); + if (EscapeCommFunction(h->fd, CLRBREAK) == 0) + return PORT_ERR_UNKNOWN; + return PORT_ERR_OK; + + default: + return PORT_ERR_UNKNOWN; + } + + /* handle RTS/DTR */ + if (EscapeCommFunction(h->fd, bit) == 0) + return PORT_ERR_UNKNOWN; + + return PORT_ERR_OK; +} + +static const char *serial_w32_get_cfg_str(struct port_interface *port) +{ + serial_t *h; + + h = (serial_t *)port->private; + return h ? h->setup_str : "INVALID"; +} + +struct port_interface port_serial = { + .name = "serial_w32", + .flags = PORT_BYTE | PORT_GVR_ETX | PORT_CMD_INIT | PORT_RETRY, + .open = serial_w32_open, + .close = serial_w32_close, + .read = serial_w32_read, + .write = serial_w32_write, + .gpio = serial_w32_gpio, + .get_cfg_str = serial_w32_get_cfg_str, +}; diff --git a/stm32flash_src/stm32.c b/stm32flash_src/stm32.c new file mode 100644 index 0000000..36bdd2f --- /dev/null +++ b/stm32flash_src/stm32.c @@ -0,0 +1,1125 @@ +/* + stm32flash - Open Source ST STM32 flash program for *nix + Copyright 2010 Geoffrey McRae + Copyright 2012-2014 Tormod Volden + + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public License + as published by the Free Software Foundation; either version 2 + of the License, or (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. +*/ + +#include +#include +#include +#include +#include +#include + +#include "stm32.h" +#include "port.h" +#include "utils.h" + +#define STM32_ACK 0x79 +#define STM32_NACK 0x1F +#define STM32_BUSY 0x76 + +#define STM32_CMD_INIT 0x7F +#define STM32_CMD_GET 0x00 /* get the version and command supported */ +#define STM32_CMD_GVR 0x01 /* get version and read protection status */ +#define STM32_CMD_GID 0x02 /* get ID */ +#define STM32_CMD_RM 0x11 /* read memory */ +#define STM32_CMD_GO 0x21 /* go */ +#define STM32_CMD_WM 0x31 /* write memory */ +#define STM32_CMD_WM_NS 0x32 /* no-stretch write memory */ +#define STM32_CMD_ER 0x43 /* erase */ +#define STM32_CMD_EE 0x44 /* extended erase */ +#define STM32_CMD_EE_NS 0x45 /* extended erase no-stretch */ +#define STM32_CMD_WP 0x63 /* write protect */ +#define STM32_CMD_WP_NS 0x64 /* write protect no-stretch */ +#define STM32_CMD_UW 0x73 /* write unprotect */ +#define STM32_CMD_UW_NS 0x74 /* write unprotect no-stretch */ +#define STM32_CMD_RP 0x82 /* readout protect */ +#define STM32_CMD_RP_NS 0x83 /* readout protect no-stretch */ +#define STM32_CMD_UR 0x92 /* readout unprotect */ +#define STM32_CMD_UR_NS 0x93 /* readout unprotect no-stretch */ +#define STM32_CMD_CRC 0xA1 /* compute CRC */ +#define STM32_CMD_ERR 0xFF /* not a valid command */ + +#define STM32_RESYNC_TIMEOUT 35 /* seconds */ +#define STM32_MASSERASE_TIMEOUT 35 /* seconds */ +#define STM32_PAGEERASE_TIMEOUT 5 /* seconds */ +#define STM32_BLKWRITE_TIMEOUT 1 /* seconds */ +#define STM32_WUNPROT_TIMEOUT 1 /* seconds */ +#define STM32_WPROT_TIMEOUT 1 /* seconds */ +#define STM32_RPROT_TIMEOUT 1 /* seconds */ + +#define STM32_CMD_GET_LENGTH 17 /* bytes in the reply */ + +struct stm32_cmd { + uint8_t get; + uint8_t gvr; + uint8_t gid; + uint8_t rm; + uint8_t go; + uint8_t wm; + uint8_t er; /* this may be extended erase */ + uint8_t wp; + uint8_t uw; + uint8_t rp; + uint8_t ur; + uint8_t crc; +}; + +/* Reset code for ARMv7-M (Cortex-M3) and ARMv6-M (Cortex-M0) + * see ARMv7-M or ARMv6-M Architecture Reference Manual (table B3-8) + * or "The definitive guide to the ARM Cortex-M3", section 14.4. + */ +static const uint8_t stm_reset_code[] = { + 0x01, 0x49, // ldr r1, [pc, #4] ; () + 0x02, 0x4A, // ldr r2, [pc, #8] ; () + 0x0A, 0x60, // str r2, [r1, #0] + 0xfe, 0xe7, // endless: b endless + 0x0c, 0xed, 0x00, 0xe0, // .word 0xe000ed0c = NVIC AIRCR register address + 0x04, 0x00, 0xfa, 0x05 // .word 0x05fa0004 = VECTKEY | SYSRESETREQ +}; + +static const uint32_t stm_reset_code_length = sizeof(stm_reset_code); + +/* RM0360, Empty check + * On STM32F070x6 and STM32F030xC devices only, internal empty check flag is + * implemented to allow easy programming of the virgin devices by the boot loader. This flag is + * used when BOOT0 pin is defining Main Flash memory as the target boot space. When the + * flag is set, the device is considered as empty and System memory (boot loader) is selected + * instead of the Main Flash as a boot space to allow user to program the Flash memory. + * This flag is updated only during Option bytes loading: it is set when the content of the + * address 0x08000 0000 is read as 0xFFFF FFFF, otherwise it is cleared. It means a power + * on or setting of OBL_LAUNCH bit in FLASH_CR register is needed to clear this flag after + * programming of a virgin device to execute user code after System reset. + */ +static const uint8_t stm_obl_launch_code[] = { + 0x01, 0x49, // ldr r1, [pc, #4] ; () + 0x02, 0x4A, // ldr r2, [pc, #8] ; () + 0x0A, 0x60, // str r2, [r1, #0] + 0xfe, 0xe7, // endless: b endless + 0x10, 0x20, 0x02, 0x40, // address: FLASH_CR = 40022010 + 0x00, 0x20, 0x00, 0x00 // value: OBL_LAUNCH = 00002000 +}; + +static const uint32_t stm_obl_launch_code_length = sizeof(stm_obl_launch_code); + +extern const stm32_dev_t devices[]; + +int flash_addr_to_page_ceil(uint32_t addr); + +static void stm32_warn_stretching(const char *f) +{ + fprintf(stderr, "Attention !!!\n"); + fprintf(stderr, "\tThis %s error could be caused by your I2C\n", f); + fprintf(stderr, "\tcontroller not accepting \"clock stretching\"\n"); + fprintf(stderr, "\tas required by bootloader.\n"); + fprintf(stderr, "\tCheck \"I2C.txt\" in stm32flash source code.\n"); +} + +static stm32_err_t stm32_get_ack_timeout(const stm32_t *stm, time_t timeout) +{ + struct port_interface *port = stm->port; + uint8_t byte; + port_err_t p_err; + time_t t0, t1; + + if (!(port->flags & PORT_RETRY)) + timeout = 0; + + if (timeout) + time(&t0); + + do { + p_err = port->read(port, &byte, 1); + if (p_err == PORT_ERR_TIMEDOUT && timeout) { + time(&t1); + if (t1 < t0 + timeout) + continue; + } + + if (p_err != PORT_ERR_OK) { + fprintf(stderr, "Failed to read ACK byte\n"); + return STM32_ERR_UNKNOWN; + } + + if (byte == STM32_ACK) + return STM32_ERR_OK; + if (byte == STM32_NACK) + return STM32_ERR_NACK; + if (byte != STM32_BUSY) { + fprintf(stderr, "Got byte 0x%02x instead of ACK\n", + byte); + return STM32_ERR_UNKNOWN; + } + } while (1); +} + +static stm32_err_t stm32_get_ack(const stm32_t *stm) +{ + return stm32_get_ack_timeout(stm, 0); +} + +static stm32_err_t stm32_send_command_timeout(const stm32_t *stm, + const uint8_t cmd, + time_t timeout) +{ + struct port_interface *port = stm->port; + stm32_err_t s_err; + port_err_t p_err; + uint8_t buf[2]; + + buf[0] = cmd; + buf[1] = cmd ^ 0xFF; + p_err = port->write(port, buf, 2); + if (p_err != PORT_ERR_OK) { + fprintf(stderr, "Failed to send command\n"); + return STM32_ERR_UNKNOWN; + } + s_err = stm32_get_ack_timeout(stm, timeout); + if (s_err == STM32_ERR_OK) + return STM32_ERR_OK; + if (s_err == STM32_ERR_NACK) + fprintf(stderr, "Got NACK from device on command 0x%02x\n", cmd); + else + fprintf(stderr, "Unexpected reply from device on command 0x%02x\n", cmd); + return STM32_ERR_UNKNOWN; +} + +static stm32_err_t stm32_send_command(const stm32_t *stm, const uint8_t cmd) +{ + return stm32_send_command_timeout(stm, cmd, 0); +} + +/* if we have lost sync, send a wrong command and expect a NACK */ +static stm32_err_t stm32_resync(const stm32_t *stm) +{ + struct port_interface *port = stm->port; + port_err_t p_err; + uint8_t buf[2], ack; + time_t t0, t1; + + time(&t0); + t1 = t0; + + buf[0] = STM32_CMD_ERR; + buf[1] = STM32_CMD_ERR ^ 0xFF; + while (t1 < t0 + STM32_RESYNC_TIMEOUT) { + p_err = port->write(port, buf, 2); + if (p_err != PORT_ERR_OK) { + usleep(500000); + time(&t1); + continue; + } + p_err = port->read(port, &ack, 1); + if (p_err != PORT_ERR_OK) { + time(&t1); + continue; + } + if (ack == STM32_NACK) + return STM32_ERR_OK; + time(&t1); + } + return STM32_ERR_UNKNOWN; +} + +/* + * some command receive reply frame with variable length, and length is + * embedded in reply frame itself. + * We can guess the length, but if we guess wrong the protocol gets out + * of sync. + * Use resync for frame oriented interfaces (e.g. I2C) and byte-by-byte + * read for byte oriented interfaces (e.g. UART). + * + * to run safely, data buffer should be allocated for 256+1 bytes + * + * len is value of the first byte in the frame. + */ +static stm32_err_t stm32_guess_len_cmd(const stm32_t *stm, uint8_t cmd, + uint8_t *data, unsigned int len) +{ + struct port_interface *port = stm->port; + port_err_t p_err; + + if (stm32_send_command(stm, cmd) != STM32_ERR_OK) + return STM32_ERR_UNKNOWN; + if (port->flags & PORT_BYTE) { + /* interface is UART-like */ + p_err = port->read(port, data, 1); + if (p_err != PORT_ERR_OK) + return STM32_ERR_UNKNOWN; + len = data[0]; + p_err = port->read(port, data + 1, len + 1); + if (p_err != PORT_ERR_OK) + return STM32_ERR_UNKNOWN; + return STM32_ERR_OK; + } + + p_err = port->read(port, data, len + 2); + if (p_err == PORT_ERR_OK && len == data[0]) + return STM32_ERR_OK; + if (p_err != PORT_ERR_OK) { + /* restart with only one byte */ + if (stm32_resync(stm) != STM32_ERR_OK) + return STM32_ERR_UNKNOWN; + if (stm32_send_command(stm, cmd) != STM32_ERR_OK) + return STM32_ERR_UNKNOWN; + p_err = port->read(port, data, 1); + if (p_err != PORT_ERR_OK) + return STM32_ERR_UNKNOWN; + } + + fprintf(stderr, "Re sync (len = %d)\n", data[0]); + if (stm32_resync(stm) != STM32_ERR_OK) + return STM32_ERR_UNKNOWN; + + len = data[0]; + if (stm32_send_command(stm, cmd) != STM32_ERR_OK) + return STM32_ERR_UNKNOWN; + p_err = port->read(port, data, len + 2); + if (p_err != PORT_ERR_OK) + return STM32_ERR_UNKNOWN; + return STM32_ERR_OK; +} + +/* + * Some interface, e.g. UART, requires a specific init sequence to let STM32 + * autodetect the interface speed. + * The sequence is only required one time after reset. + * stm32flash has command line flag "-c" to prevent sending the init sequence + * in case it was already sent before. + * User can easily forget adding "-c". In this case the bootloader would + * interpret the init sequence as part of a command message, then waiting for + * the rest of the message blocking the interface. + * This function sends the init sequence and, in case of timeout, recovers + * the interface. + */ +static stm32_err_t stm32_send_init_seq(const stm32_t *stm) +{ + struct port_interface *port = stm->port; + port_err_t p_err; + uint8_t byte, cmd = STM32_CMD_INIT; + + p_err = port->write(port, &cmd, 1); + if (p_err != PORT_ERR_OK) { + fprintf(stderr, "Failed to send init to device\n"); + return STM32_ERR_UNKNOWN; + } + p_err = port->read(port, &byte, 1); + if (p_err == PORT_ERR_OK && byte == STM32_ACK) + return STM32_ERR_OK; + if (p_err == PORT_ERR_OK && byte == STM32_NACK) { + /* We could get error later, but let's continue, for now. */ + fprintf(stderr, + "Warning: the interface was not closed properly.\n"); + return STM32_ERR_OK; + } + if (p_err != PORT_ERR_TIMEDOUT) { + fprintf(stderr, "Failed to init device.\n"); + return STM32_ERR_UNKNOWN; + } + + /* + * Check if previous STM32_CMD_INIT was taken as first byte + * of a command. Send a new byte, we should get back a NACK. + */ + p_err = port->write(port, &cmd, 1); + if (p_err != PORT_ERR_OK) { + fprintf(stderr, "Failed to send init to device\n"); + return STM32_ERR_UNKNOWN; + } + p_err = port->read(port, &byte, 1); + if (p_err == PORT_ERR_OK && byte == STM32_NACK) + return STM32_ERR_OK; + fprintf(stderr, "Failed to init device.\n"); + return STM32_ERR_UNKNOWN; +} + +/* find newer command by higher code */ +#define newer(prev, a) (((prev) == STM32_CMD_ERR) \ + ? (a) \ + : (((prev) > (a)) ? (prev) : (a))) + +stm32_t *stm32_init(struct port_interface *port, const char init) +{ + uint8_t len, val, buf[257]; + stm32_t *stm; + int i, new_cmds; + + stm = calloc(sizeof(stm32_t), 1); + stm->cmd = malloc(sizeof(stm32_cmd_t)); + memset(stm->cmd, STM32_CMD_ERR, sizeof(stm32_cmd_t)); + stm->port = port; + + if ((port->flags & PORT_CMD_INIT) && init) { + uint8_t retr_counter = 0; + stm32_err_t ret_val; + do { + ret_val = stm32_send_init_seq(stm); + if (ret_val == STM32_ERR_OK) { + break; + } + retr_counter++; + } while (retr_counter < 3); + + if (ret_val != stm32_send_init_seq(stm)) { + return NULL; + } + } + + /* get the version and read protection status */ + if (stm32_send_command(stm, STM32_CMD_GVR) != STM32_ERR_OK) { + stm32_close(stm); + return NULL; + } + + /* From AN, only UART bootloader returns 3 bytes */ + len = (port->flags & PORT_GVR_ETX) ? 3 : 1; + if (port->read(port, buf, len) != PORT_ERR_OK) + return NULL; + stm->version = buf[0]; + stm->option1 = (port->flags & PORT_GVR_ETX) ? buf[1] : 0; + stm->option2 = (port->flags & PORT_GVR_ETX) ? buf[2] : 0; + if (stm32_get_ack(stm) != STM32_ERR_OK) { + stm32_close(stm); + return NULL; + } + + /* get the bootloader information */ + len = STM32_CMD_GET_LENGTH; + if (port->cmd_get_reply) + for (i = 0; port->cmd_get_reply[i].length; i++) + if (stm->version == port->cmd_get_reply[i].version) { + len = port->cmd_get_reply[i].length; + break; + } + if (stm32_guess_len_cmd(stm, STM32_CMD_GET, buf, len) != STM32_ERR_OK) + return NULL; + len = buf[0] + 1; + stm->bl_version = buf[1]; + new_cmds = 0; + for (i = 1; i < len; i++) { + val = buf[i + 1]; + switch (val) { + case STM32_CMD_GET: + stm->cmd->get = val; break; + case STM32_CMD_GVR: + stm->cmd->gvr = val; break; + case STM32_CMD_GID: + stm->cmd->gid = val; break; + case STM32_CMD_RM: + stm->cmd->rm = val; break; + case STM32_CMD_GO: + stm->cmd->go = val; break; + case STM32_CMD_WM: + case STM32_CMD_WM_NS: + stm->cmd->wm = newer(stm->cmd->wm, val); + break; + case STM32_CMD_ER: + case STM32_CMD_EE: + case STM32_CMD_EE_NS: + stm->cmd->er = newer(stm->cmd->er, val); + break; + case STM32_CMD_WP: + case STM32_CMD_WP_NS: + stm->cmd->wp = newer(stm->cmd->wp, val); + break; + case STM32_CMD_UW: + case STM32_CMD_UW_NS: + stm->cmd->uw = newer(stm->cmd->uw, val); + break; + case STM32_CMD_RP: + case STM32_CMD_RP_NS: + stm->cmd->rp = newer(stm->cmd->rp, val); + break; + case STM32_CMD_UR: + case STM32_CMD_UR_NS: + stm->cmd->ur = newer(stm->cmd->ur, val); + break; + case STM32_CMD_CRC: + stm->cmd->crc = newer(stm->cmd->crc, val); + break; + default: + if (new_cmds++ == 0) + fprintf(stderr, + "GET returns unknown commands (0x%2x", + val); + else + fprintf(stderr, ", 0x%2x", val); + } + } + if (new_cmds) + fprintf(stderr, ")\n"); + if (stm32_get_ack(stm) != STM32_ERR_OK) { + stm32_close(stm); + return NULL; + } + + if (stm->cmd->get == STM32_CMD_ERR + || stm->cmd->gvr == STM32_CMD_ERR + || stm->cmd->gid == STM32_CMD_ERR) { + fprintf(stderr, "Error: bootloader did not returned correct information from GET command\n"); + return NULL; + } + + /* get the device ID */ + if (stm32_guess_len_cmd(stm, stm->cmd->gid, buf, 1) != STM32_ERR_OK) { + stm32_close(stm); + return NULL; + } + len = buf[0] + 1; + if (len < 2) { + stm32_close(stm); + fprintf(stderr, "Only %d bytes sent in the PID, unknown/unsupported device\n", len); + return NULL; + } + stm->pid = (buf[1] << 8) | buf[2]; + if (len > 2) { + fprintf(stderr, "This bootloader returns %d extra bytes in PID:", len); + for (i = 2; i <= len ; i++) + fprintf(stderr, " %02x", buf[i]); + fprintf(stderr, "\n"); + } + if (stm32_get_ack(stm) != STM32_ERR_OK) { + stm32_close(stm); + return NULL; + } + + stm->dev = devices; + while (stm->dev->id != 0x00 && stm->dev->id != stm->pid) + ++stm->dev; + + if (!stm->dev->id) { + fprintf(stderr, "Unknown/unsupported device (Device ID: 0x%03x)\n", stm->pid); + stm32_close(stm); + return NULL; + } + + return stm; +} + +void stm32_close(stm32_t *stm) +{ + if (stm) + free(stm->cmd); + free(stm); +} + +stm32_err_t stm32_read_memory(const stm32_t *stm, uint32_t address, + uint8_t data[], unsigned int len) +{ + struct port_interface *port = stm->port; + uint8_t buf[5]; + + if (!len) + return STM32_ERR_OK; + + if (len > 256) { + fprintf(stderr, "Error: READ length limit at 256 bytes\n"); + return STM32_ERR_UNKNOWN; + } + + if (stm->cmd->rm == STM32_CMD_ERR) { + fprintf(stderr, "Error: READ command not implemented in bootloader.\n"); + return STM32_ERR_NO_CMD; + } + + if (stm32_send_command(stm, stm->cmd->rm) != STM32_ERR_OK) + return STM32_ERR_UNKNOWN; + + buf[0] = address >> 24; + buf[1] = (address >> 16) & 0xFF; + buf[2] = (address >> 8) & 0xFF; + buf[3] = address & 0xFF; + buf[4] = buf[0] ^ buf[1] ^ buf[2] ^ buf[3]; + if (port->write(port, buf, 5) != PORT_ERR_OK) + return STM32_ERR_UNKNOWN; + if (stm32_get_ack(stm) != STM32_ERR_OK) + return STM32_ERR_UNKNOWN; + + if (stm32_send_command(stm, len - 1) != STM32_ERR_OK) + return STM32_ERR_UNKNOWN; + + if (port->read(port, data, len) != PORT_ERR_OK) + return STM32_ERR_UNKNOWN; + + return STM32_ERR_OK; +} + +stm32_err_t stm32_write_memory(const stm32_t *stm, uint32_t address, + const uint8_t data[], unsigned int len) +{ + struct port_interface *port = stm->port; + uint8_t cs, buf[256 + 2]; + unsigned int i, aligned_len; + stm32_err_t s_err; + + if (!len) + return STM32_ERR_OK; + + if (len > 256) { + fprintf(stderr, "Error: WRITE length limit at 256 bytes\n"); + return STM32_ERR_UNKNOWN; + } + + /* must be 32bit aligned */ + if (address & 0x3) { + fprintf(stderr, "Error: WRITE address must be 4 byte aligned\n"); + return STM32_ERR_UNKNOWN; + } + + if (stm->cmd->wm == STM32_CMD_ERR) { + fprintf(stderr, "Error: WRITE command not implemented in bootloader.\n"); + return STM32_ERR_NO_CMD; + } + + /* send the address and checksum */ + if (stm32_send_command(stm, stm->cmd->wm) != STM32_ERR_OK) + return STM32_ERR_UNKNOWN; + + buf[0] = address >> 24; + buf[1] = (address >> 16) & 0xFF; + buf[2] = (address >> 8) & 0xFF; + buf[3] = address & 0xFF; + buf[4] = buf[0] ^ buf[1] ^ buf[2] ^ buf[3]; + if (port->write(port, buf, 5) != PORT_ERR_OK) + return STM32_ERR_UNKNOWN; + if (stm32_get_ack(stm) != STM32_ERR_OK) + return STM32_ERR_UNKNOWN; + + aligned_len = (len + 3) & ~3; + cs = aligned_len - 1; + buf[0] = aligned_len - 1; + for (i = 0; i < len; i++) { + cs ^= data[i]; + buf[i + 1] = data[i]; + } + /* padding data */ + for (i = len; i < aligned_len; i++) { + cs ^= 0xFF; + buf[i + 1] = 0xFF; + } + buf[aligned_len + 1] = cs; + if (port->write(port, buf, aligned_len + 2) != PORT_ERR_OK) + return STM32_ERR_UNKNOWN; + + s_err = stm32_get_ack_timeout(stm, STM32_BLKWRITE_TIMEOUT); + if (s_err != STM32_ERR_OK) { + if (port->flags & PORT_STRETCH_W + && stm->cmd->wm != STM32_CMD_WM_NS) + stm32_warn_stretching("write"); + return STM32_ERR_UNKNOWN; + } + return STM32_ERR_OK; +} + +stm32_err_t stm32_wunprot_memory(const stm32_t *stm) +{ + struct port_interface *port = stm->port; + stm32_err_t s_err; + + if (stm->cmd->uw == STM32_CMD_ERR) { + fprintf(stderr, "Error: WRITE UNPROTECT command not implemented in bootloader.\n"); + return STM32_ERR_NO_CMD; + } + + if (stm32_send_command(stm, stm->cmd->uw) != STM32_ERR_OK) + return STM32_ERR_UNKNOWN; + + s_err = stm32_get_ack_timeout(stm, STM32_WUNPROT_TIMEOUT); + if (s_err == STM32_ERR_NACK) { + fprintf(stderr, "Error: Failed to WRITE UNPROTECT\n"); + return STM32_ERR_UNKNOWN; + } + if (s_err != STM32_ERR_OK) { + if (port->flags & PORT_STRETCH_W + && stm->cmd->uw != STM32_CMD_UW_NS) + stm32_warn_stretching("WRITE UNPROTECT"); + return STM32_ERR_UNKNOWN; + } + return STM32_ERR_OK; +} + +stm32_err_t stm32_wprot_memory(const stm32_t *stm) +{ + struct port_interface *port = stm->port; + stm32_err_t s_err; + + if (stm->cmd->wp == STM32_CMD_ERR) { + fprintf(stderr, "Error: WRITE PROTECT command not implemented in bootloader.\n"); + return STM32_ERR_NO_CMD; + } + + if (stm32_send_command(stm, stm->cmd->wp) != STM32_ERR_OK) + return STM32_ERR_UNKNOWN; + + s_err = stm32_get_ack_timeout(stm, STM32_WPROT_TIMEOUT); + if (s_err == STM32_ERR_NACK) { + fprintf(stderr, "Error: Failed to WRITE PROTECT\n"); + return STM32_ERR_UNKNOWN; + } + if (s_err != STM32_ERR_OK) { + if (port->flags & PORT_STRETCH_W + && stm->cmd->wp != STM32_CMD_WP_NS) + stm32_warn_stretching("WRITE PROTECT"); + return STM32_ERR_UNKNOWN; + } + return STM32_ERR_OK; +} + +stm32_err_t stm32_runprot_memory(const stm32_t *stm) +{ + struct port_interface *port = stm->port; + stm32_err_t s_err; + + if (stm->cmd->ur == STM32_CMD_ERR) { + fprintf(stderr, "Error: READOUT UNPROTECT command not implemented in bootloader.\n"); + return STM32_ERR_NO_CMD; + } + + if (stm32_send_command(stm, stm->cmd->ur) != STM32_ERR_OK) + return STM32_ERR_UNKNOWN; + + s_err = stm32_get_ack_timeout(stm, STM32_MASSERASE_TIMEOUT); + if (s_err == STM32_ERR_NACK) { + fprintf(stderr, "Error: Failed to READOUT UNPROTECT\n"); + return STM32_ERR_UNKNOWN; + } + if (s_err != STM32_ERR_OK) { + if (port->flags & PORT_STRETCH_W + && stm->cmd->ur != STM32_CMD_UR_NS) + stm32_warn_stretching("READOUT UNPROTECT"); + return STM32_ERR_UNKNOWN; + } + return STM32_ERR_OK; +} + +stm32_err_t stm32_readprot_memory(const stm32_t *stm) +{ + struct port_interface *port = stm->port; + stm32_err_t s_err; + + if (stm->cmd->rp == STM32_CMD_ERR) { + fprintf(stderr, "Error: READOUT PROTECT command not implemented in bootloader.\n"); + return STM32_ERR_NO_CMD; + } + + if (stm32_send_command(stm, stm->cmd->rp) != STM32_ERR_OK) + return STM32_ERR_UNKNOWN; + + s_err = stm32_get_ack_timeout(stm, STM32_RPROT_TIMEOUT); + if (s_err == STM32_ERR_NACK) { + fprintf(stderr, "Error: Failed to READOUT PROTECT\n"); + return STM32_ERR_UNKNOWN; + } + if (s_err != STM32_ERR_OK) { + if (port->flags & PORT_STRETCH_W + && stm->cmd->rp != STM32_CMD_RP_NS) + stm32_warn_stretching("READOUT PROTECT"); + return STM32_ERR_UNKNOWN; + } + return STM32_ERR_OK; +} + +static stm32_err_t stm32_mass_erase(const stm32_t *stm) +{ + struct port_interface *port = stm->port; + stm32_err_t s_err; + uint8_t buf[3]; + + if (stm32_send_command(stm, stm->cmd->er) != STM32_ERR_OK) { + fprintf(stderr, "Can't initiate chip mass erase!\n"); + return STM32_ERR_UNKNOWN; + } + + /* regular erase (0x43) */ + if (stm->cmd->er == STM32_CMD_ER) { + s_err = stm32_send_command_timeout(stm, 0xFF, STM32_MASSERASE_TIMEOUT); + if (s_err != STM32_ERR_OK) { + if (port->flags & PORT_STRETCH_W) + stm32_warn_stretching("mass erase"); + return STM32_ERR_UNKNOWN; + } + return STM32_ERR_OK; + } + + /* extended erase */ + buf[0] = 0xFF; /* 0xFFFF the magic number for mass erase */ + buf[1] = 0xFF; + buf[2] = 0x00; /* checksum */ + if (port->write(port, buf, 3) != PORT_ERR_OK) { + fprintf(stderr, "Mass erase error.\n"); + return STM32_ERR_UNKNOWN; + } + s_err = stm32_get_ack_timeout(stm, STM32_MASSERASE_TIMEOUT); + if (s_err != STM32_ERR_OK) { + fprintf(stderr, "Mass erase failed. Try specifying the number of pages to be erased.\n"); + if (port->flags & PORT_STRETCH_W + && stm->cmd->er != STM32_CMD_EE_NS) { + stm32_warn_stretching("mass erase"); + } + return STM32_ERR_UNKNOWN; + } + return STM32_ERR_OK; +} + +static stm32_err_t stm32_pages_erase(const stm32_t *stm, uint32_t spage, uint32_t pages) +{ + struct port_interface *port = stm->port; + stm32_err_t s_err; + port_err_t p_err; + uint32_t pg_num; + uint8_t pg_byte; + uint8_t cs = 0; + uint8_t *buf; + int i = 0; + + /* The erase command reported by the bootloader is either 0x43, 0x44 or 0x45 */ + /* 0x44 is Extended Erase, a 2 byte based protocol and needs to be handled differently. */ + /* 0x45 is clock no-stretching version of Extended Erase for I2C port. */ + if (stm32_send_command(stm, stm->cmd->er) != STM32_ERR_OK) { + fprintf(stderr, "Can't initiate chip mass erase!\n"); + return STM32_ERR_UNKNOWN; + } + + /* regular erase (0x43) */ + if (stm->cmd->er == STM32_CMD_ER) { + buf = malloc(1 + pages + 1); + if (!buf) + return STM32_ERR_UNKNOWN; + + buf[i++] = pages - 1; + cs ^= (pages-1); + for (pg_num = spage; pg_num < (pages + spage); pg_num++) { + buf[i++] = pg_num; + cs ^= pg_num; + } + buf[i++] = cs; + p_err = port->write(port, buf, i); + free(buf); + if (p_err != PORT_ERR_OK) { + fprintf(stderr, "Erase failed.\n"); + return STM32_ERR_UNKNOWN; + } + s_err = stm32_get_ack_timeout(stm, pages * STM32_PAGEERASE_TIMEOUT); + if (s_err != STM32_ERR_OK) { + if (port->flags & PORT_STRETCH_W) + stm32_warn_stretching("erase"); + return STM32_ERR_UNKNOWN; + } + return STM32_ERR_OK; + } + + /* extended erase */ + buf = malloc(2 + 2 * pages + 1); + if (!buf) + return STM32_ERR_UNKNOWN; + + /* Number of pages to be erased - 1, two bytes, MSB first */ + pg_byte = (pages - 1) >> 8; + buf[i++] = pg_byte; + cs ^= pg_byte; + pg_byte = (pages - 1) & 0xFF; + buf[i++] = pg_byte; + cs ^= pg_byte; + + for (pg_num = spage; pg_num < spage + pages; pg_num++) { + pg_byte = pg_num >> 8; + cs ^= pg_byte; + buf[i++] = pg_byte; + pg_byte = pg_num & 0xFF; + cs ^= pg_byte; + buf[i++] = pg_byte; + } + buf[i++] = cs; + p_err = port->write(port, buf, i); + free(buf); + if (p_err != PORT_ERR_OK) { + fprintf(stderr, "Page-by-page erase error.\n"); + return STM32_ERR_UNKNOWN; + } + + s_err = stm32_get_ack_timeout(stm, pages * STM32_PAGEERASE_TIMEOUT); + if (s_err != STM32_ERR_OK) { + fprintf(stderr, "Page-by-page erase failed. Check the maximum pages your device supports.\n"); + if (port->flags & PORT_STRETCH_W + && stm->cmd->er != STM32_CMD_EE_NS) + stm32_warn_stretching("erase"); + return STM32_ERR_UNKNOWN; + } + + return STM32_ERR_OK; +} + +stm32_err_t stm32_erase_memory(const stm32_t *stm, uint32_t spage, uint32_t pages) +{ + uint32_t n; + stm32_err_t s_err; + + if (!pages || spage > STM32_MAX_PAGES || + ((pages != STM32_MASS_ERASE) && ((spage + pages) > STM32_MAX_PAGES))) + return STM32_ERR_OK; + + if (stm->cmd->er == STM32_CMD_ERR) { + fprintf(stderr, "Error: ERASE command not implemented in bootloader.\n"); + return STM32_ERR_NO_CMD; + } + + if (pages == STM32_MASS_ERASE) { + /* + * Not all chips support mass erase. + * Mass erase can be obtained executing a "readout protect" + * followed by "readout un-protect". This method is not + * suggested because can hang the target if a debug SWD/JTAG + * is connected. When the target enters in "readout + * protection" mode it will consider the debug connection as + * a tentative of intrusion and will hang. + * Erasing the flash page-by-page is the safer way to go. + */ + if (!(stm->dev->flags & F_NO_ME)) + return stm32_mass_erase(stm); + + pages = flash_addr_to_page_ceil(stm->dev->fl_end); + } + + /* + * Some device, like STM32L152, cannot erase more than 512 pages in + * one command. Split the call. + */ + while (pages) { + n = (pages <= 512) ? pages : 512; + s_err = stm32_pages_erase(stm, spage, n); + if (s_err != STM32_ERR_OK) + return s_err; + spage += n; + pages -= n; + } + return STM32_ERR_OK; +} + +static stm32_err_t stm32_run_raw_code(const stm32_t *stm, + uint32_t target_address, + const uint8_t *code, uint32_t code_size) +{ + uint32_t stack_le = le_u32(0x20002000); + uint32_t code_address_le = le_u32(target_address + 8 + 1); // thumb mode address (!) + uint32_t length = code_size + 8; + uint8_t *mem, *pos; + uint32_t address, w; + + /* Must be 32-bit aligned */ + if (target_address & 0x3) { + fprintf(stderr, "Error: code address must be 4 byte aligned\n"); + return STM32_ERR_UNKNOWN; + } + + mem = malloc(length); + if (!mem) + return STM32_ERR_UNKNOWN; + + memcpy(mem, &stack_le, sizeof(uint32_t)); + memcpy(mem + 4, &code_address_le, sizeof(uint32_t)); + memcpy(mem + 8, code, code_size); + + pos = mem; + address = target_address; + while (length > 0) { + w = length > 256 ? 256 : length; + if (stm32_write_memory(stm, address, pos, w) != STM32_ERR_OK) { + free(mem); + return STM32_ERR_UNKNOWN; + } + + address += w; + pos += w; + length -= w; + } + + free(mem); + return stm32_go(stm, target_address); +} + +stm32_err_t stm32_go(const stm32_t *stm, uint32_t address) +{ + struct port_interface *port = stm->port; + uint8_t buf[5]; + + if (stm->cmd->go == STM32_CMD_ERR) { + fprintf(stderr, "Error: GO command not implemented in bootloader.\n"); + return STM32_ERR_NO_CMD; + } + + if (stm32_send_command(stm, stm->cmd->go) != STM32_ERR_OK) + return STM32_ERR_UNKNOWN; + + buf[0] = address >> 24; + buf[1] = (address >> 16) & 0xFF; + buf[2] = (address >> 8) & 0xFF; + buf[3] = address & 0xFF; + buf[4] = buf[0] ^ buf[1] ^ buf[2] ^ buf[3]; + if (port->write(port, buf, 5) != PORT_ERR_OK) + return STM32_ERR_UNKNOWN; + + if (stm32_get_ack(stm) != STM32_ERR_OK) + return STM32_ERR_UNKNOWN; + return STM32_ERR_OK; +} + +stm32_err_t stm32_reset_device(const stm32_t *stm) +{ + uint32_t target_address = stm->dev->ram_start; + + if (stm->dev->flags & F_OBLL) { + /* set the OBL_LAUNCH bit to reset device (see RM0360, 2.5) */ + return stm32_run_raw_code(stm, target_address, stm_obl_launch_code, stm_obl_launch_code_length); + } else { + return stm32_run_raw_code(stm, target_address, stm_reset_code, stm_reset_code_length); + } +} + +stm32_err_t stm32_crc_memory(const stm32_t *stm, uint32_t address, + uint32_t length, uint32_t *crc) +{ + struct port_interface *port = stm->port; + uint8_t buf[5]; + + if (address & 0x3 || length & 0x3) { + fprintf(stderr, "Start and end addresses must be 4 byte aligned\n"); + return STM32_ERR_UNKNOWN; + } + + if (stm->cmd->crc == STM32_CMD_ERR) { + fprintf(stderr, "Error: CRC command not implemented in bootloader.\n"); + return STM32_ERR_NO_CMD; + } + + if (stm32_send_command(stm, stm->cmd->crc) != STM32_ERR_OK) + return STM32_ERR_UNKNOWN; + + buf[0] = address >> 24; + buf[1] = (address >> 16) & 0xFF; + buf[2] = (address >> 8) & 0xFF; + buf[3] = address & 0xFF; + buf[4] = buf[0] ^ buf[1] ^ buf[2] ^ buf[3]; + if (port->write(port, buf, 5) != PORT_ERR_OK) + return STM32_ERR_UNKNOWN; + + if (stm32_get_ack(stm) != STM32_ERR_OK) + return STM32_ERR_UNKNOWN; + + buf[0] = length >> 24; + buf[1] = (length >> 16) & 0xFF; + buf[2] = (length >> 8) & 0xFF; + buf[3] = length & 0xFF; + buf[4] = buf[0] ^ buf[1] ^ buf[2] ^ buf[3]; + if (port->write(port, buf, 5) != PORT_ERR_OK) + return STM32_ERR_UNKNOWN; + + if (stm32_get_ack(stm) != STM32_ERR_OK) + return STM32_ERR_UNKNOWN; + + if (stm32_get_ack(stm) != STM32_ERR_OK) + return STM32_ERR_UNKNOWN; + + if (port->read(port, buf, 5) != PORT_ERR_OK) + return STM32_ERR_UNKNOWN; + + if (buf[4] != (buf[0] ^ buf[1] ^ buf[2] ^ buf[3])) + return STM32_ERR_UNKNOWN; + + *crc = (buf[0] << 24) | (buf[1] << 16) | (buf[2] << 8) | buf[3]; + return STM32_ERR_OK; +} + +/* + * CRC computed by STM32 is similar to the standard crc32_be() + * implemented, for example, in Linux kernel in ./lib/crc32.c + * But STM32 computes it on units of 32 bits word and swaps the + * bytes of the word before the computation. + * Due to byte swap, I cannot use any CRC available in existing + * libraries, so here is a simple not optimized implementation. + */ +#define CRCPOLY_BE 0x04c11db7 +#define CRC_MSBMASK 0x80000000 +#define CRC_INIT_VALUE 0xFFFFFFFF +uint32_t stm32_sw_crc(uint32_t crc, uint8_t *buf, unsigned int len) +{ + int i; + uint32_t data; + + if (len & 0x3) { + fprintf(stderr, "Buffer length must be multiple of 4 bytes\n"); + return 0; + } + + while (len) { + data = *buf++; + data |= *buf++ << 8; + data |= *buf++ << 16; + data |= *buf++ << 24; + len -= 4; + + crc ^= data; + + for (i = 0; i < 32; i++) + if (crc & CRC_MSBMASK) + crc = (crc << 1) ^ CRCPOLY_BE; + else + crc = (crc << 1); + } + return crc; +} + +stm32_err_t stm32_crc_wrapper(const stm32_t *stm, uint32_t address, + uint32_t length, uint32_t *crc) +{ + uint8_t buf[256]; + uint32_t start, total_len, len, current_crc; + + if (address & 0x3 || length & 0x3) { + fprintf(stderr, "Start and end addresses must be 4 byte aligned\n"); + return STM32_ERR_UNKNOWN; + } + + if (stm->cmd->crc != STM32_CMD_ERR) + return stm32_crc_memory(stm, address, length, crc); + + start = address; + total_len = length; + current_crc = CRC_INIT_VALUE; + while (length) { + len = length > 256 ? 256 : length; + if (stm32_read_memory(stm, address, buf, len) != STM32_ERR_OK) { + fprintf(stderr, + "Failed to read memory at address 0x%08x, target write-protected?\n", + address); + return STM32_ERR_UNKNOWN; + } + current_crc = stm32_sw_crc(current_crc, buf, len); + length -= len; + address += len; + + fprintf(stderr, + "\rCRC address 0x%08x (%.2f%%) ", + address, + (100.0f / (float)total_len) * (float)(address - start) + ); + fflush(stderr); + } + fprintf(stderr, "Done.\n"); + *crc = current_crc; + return STM32_ERR_OK; +} diff --git a/stm32flash_src/stm32.h b/stm32flash_src/stm32.h new file mode 100644 index 0000000..c64064b --- /dev/null +++ b/stm32flash_src/stm32.h @@ -0,0 +1,94 @@ +/* + stm32flash - Open Source ST STM32 flash program for *nix + Copyright (C) 2010 Geoffrey McRae + + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public License + as published by the Free Software Foundation; either version 2 + of the License, or (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. +*/ + + +#ifndef _STM32_H +#define _STM32_H + +#include +#include "serial.h" + +#define STM32_MAX_RX_FRAME 256 /* cmd read memory */ +#define STM32_MAX_TX_FRAME (1 + 256 + 1) /* cmd write memory */ + +#define STM32_MAX_PAGES 0x0000ffff +#define STM32_MASS_ERASE 0x00100000 /* > 2 x max_pages */ + +typedef enum { + STM32_ERR_OK = 0, + STM32_ERR_UNKNOWN, /* Generic error */ + STM32_ERR_NACK, + STM32_ERR_NO_CMD, /* Command not available in bootloader */ +} stm32_err_t; + +typedef enum { + F_NO_ME = 1 << 0, /* Mass-Erase not supported */ + F_OBLL = 1 << 1, /* OBL_LAUNCH required */ +} flags_t; + +typedef struct stm32 stm32_t; +typedef struct stm32_cmd stm32_cmd_t; +typedef struct stm32_dev stm32_dev_t; + +struct stm32 { + const serial_t *serial; + struct port_interface *port; + uint8_t bl_version; + uint8_t version; + uint8_t option1, option2; + uint16_t pid; + stm32_cmd_t *cmd; + const stm32_dev_t *dev; +}; + +struct stm32_dev { + uint16_t id; + const char *name; + uint32_t ram_start, ram_end; + uint32_t fl_start, fl_end; + uint16_t fl_pps; // pages per sector + uint32_t *fl_ps; // page size + uint32_t opt_start, opt_end; + uint32_t mem_start, mem_end; + uint32_t eeprom_start, eeprom_end; + uint32_t flags; +}; + +stm32_t *stm32_init(struct port_interface *port, const char init); +void stm32_close(stm32_t *stm); +stm32_err_t stm32_read_memory(const stm32_t *stm, uint32_t address, + uint8_t data[], unsigned int len); +stm32_err_t stm32_write_memory(const stm32_t *stm, uint32_t address, + const uint8_t data[], unsigned int len); +stm32_err_t stm32_wunprot_memory(const stm32_t *stm); +stm32_err_t stm32_wprot_memory(const stm32_t *stm); +stm32_err_t stm32_erase_memory(const stm32_t *stm, uint32_t spage, + uint32_t pages); +stm32_err_t stm32_go(const stm32_t *stm, uint32_t address); +stm32_err_t stm32_reset_device(const stm32_t *stm); +stm32_err_t stm32_readprot_memory(const stm32_t *stm); +stm32_err_t stm32_runprot_memory(const stm32_t *stm); +stm32_err_t stm32_crc_memory(const stm32_t *stm, uint32_t address, + uint32_t length, uint32_t *crc); +stm32_err_t stm32_crc_wrapper(const stm32_t *stm, uint32_t address, + uint32_t length, uint32_t *crc); +uint32_t stm32_sw_crc(uint32_t crc, uint8_t *buf, unsigned int len); + +#endif + diff --git a/stm32flash_src/stm32flash.1 b/stm32flash_src/stm32flash.1 new file mode 100644 index 0000000..ca7acb7 --- /dev/null +++ b/stm32flash_src/stm32flash.1 @@ -0,0 +1,413 @@ +.TH STM32FLASH 1 "2015\-11\-25" STM32FLASH "User command" +.SH NAME +stm32flash \- flashing utility for STM32 through UART or I2C +.SH SYNOPSIS +.B stm32flash +.RB [ \-cfhjkouvCR ] +.RB [ \-a +.IR bus_address ] +.RB [ \-b +.IR baud_rate ] +.RB [ \-m +.IR serial_mode ] +.RB [ \-r +.IR filename ] +.RB [ \-w +.IR filename ] +.RB [ \-e +.IR num ] +.RB [ \-n +.IR count ] +.RB [ \-g +.IR address ] +.RB [ \-s +.IR start_page ] +.RB [ \-S +.IR address [: length ]] +.RB [ \-F +.IR RX_length [: TX_length ]] +.RB [ \-i +.IR GPIO_string ] +.RI [ tty_device +| +.IR i2c_device ] + +.SH DESCRIPTION +.B stm32flash +reads or writes the flash memory of STM32. + +It requires the STM32 to embed a bootloader compliant with ST +application note AN3155 or AN4221. +.B stm32flash +uses the serial port +.I tty_device +or the i2c port +.I i2c_device +to interact with the bootloader of STM32. + +.SH OPTIONS +.TP +.BI "\-a" " bus_address" +Specify address on bus for +.IR i2c_device . +This option is mandatory for I2C interface. + +.TP +.BI "\-b" " baud_rate" +Specify baud rate speed of +.IR tty_device . +Please notice that the ST bootloader can automatically detect the baud rate, +as explained in chapter 2 of AN3155. +This option could be required together with option +.B "\-c" +or if following interaction with bootloader is expected. +Default is +.IR 57600 . + +.TP +.BI "\-m" " mode" +Specify the format of UART data. +.I mode +is a three characters long string where each character specifies, in +this strict order, character size, parity and stop bits. +The only values currently used are +.I 8e1 +for standard STM32 bootloader and +.I 8n1 +for standard STM32W bootloader. +Default is +.IR 8e1 . + +.TP +.BI "\-r" " filename" +Specify to read the STM32 flash and write its content in +.I filename +in raw binary format (see below +.BR "FORMAT CONVERSION" ). + +.TP +.BI "\-w" " filename" +Specify to write the STM32 flash with the content of +.IR filename . +File format can be either raw binary or intel hex (see below +.BR "FORMAT CONVERSION" ). +The file format is automatically detected. +To by\-pass format detection and force binary mode (e.g. to +write an intel hex content in STM32 flash), use +.B \-f +option. + +.TP +.B \-u +Specify to disable write\-protection from STM32 flash. +The STM32 will be reset after this operation. + +.TP +.B \-j +Enable the flash read\-protection. + +.TP +.B \-k +Disable the flash read\-protection. + +.TP +.B \-o +Erase only. + +.TP +.BI "\-e" " num" +Specify to erase only +.I num +pages before writing the flash. Default is to erase the whole flash. With +.B \-e 0 +the flash would not be erased. + +.TP +.B \-v +Specify to verify flash content after write operation. + +.TP +.BI "\-n" " count" +Specify to retry failed writes up to +.I count +times. Default is 10 times. + +.TP +.BI "\-g" " address" +Specify address to start execution from (0 = flash start). + +.TP +.BI "\-s" " start_page" +Specify flash page offset (0 = flash start). + +.TP +.BI "\-S" " address" "[:" "length" "]" +Specify start address and optionally length for read/write/erase/crc operations. + +.TP +.BI "\-F" " RX_length" "[:" "TX_length" "]" +Specify the maximum frame size for the current interface. +Due to STM32 bootloader protocol, host will never handle frames bigger than +256 byte in RX or 258 byte in TX. +Due to current code, lowest limit in RX is 20 byte (to read a complete reply +of command GET). Minimum limit in TX is 5 byte, required by protocol. + +.TP +.B \-f +Force binary parser while reading file with +.BR "\-w" "." + +.TP +.B \-h +Show help. + +.TP +.B \-c +Specify to resume the existing UART connection and don't send initial +INIT sequence to detect baud rate. Baud rate must be kept the same as the +existing connection. This is useful if the reset fails. + +.TP +.BI "\-i" " GPIO_string" +Specify the GPIO sequences on the host to force STM32 to enter and +exit bootloader mode. GPIO can either be real GPIO connected from host to +STM32 beside the UART connection, or UART's modem signals used as +GPIO. (See below +.B BOOTLOADER GPIO SEQUENCE +for the format of +.I GPIO_string +and further explanation). + +.TP +.B \-C +Specify to compute CRC on memory content. +By default the CRC is computed on the whole flash content. +Use +.B "\-S" +to provide different memory address range. + +.TP +.B \-R +Specify to reset the device at exit. +This option is ignored if either +.BR "\-g" "," +.BR "\-j" "," +.B "\-k" +or +.B "\-u" +is also specified. + +.SH BOOTLOADER GPIO SEQUENCE +This feature is currently available on Linux host only. + +As explained in ST application note AN2606, after reset the STM32 will +execute either the application program in user flash or the bootloader, +depending on the level applied at specific pins of STM32 during reset. + +STM32 bootloader is automatically activated by configuring the pins +BOOT0="high" and BOOT1="low" and then by applying a reset. +Application program in user flash is activated by configuring the pin +BOOT0="low" (the level on BOOT1 is ignored) and then by applying a reset. + +When GPIO from host computer are connected to either configuration and +reset pins of STM32, +.B stm32flash +can control the host GPIO to reset STM32 and to force execution of +bootloader or execution of application program. + +The sequence of GPIO values to entry to and exit from bootloader mode is +provided with command line option +.B "\-i" +.IR "GPIO_string" . + +.PD 0 +The format of +.IR "GPIO_string" " is:" +.RS +GPIO_string = [entry sequence][:[exit sequence]] +.P +sequence = [\-]n[,sequence] +.RE +.PD +.P +In the above sequences, negative numbers correspond to GPIO at "low" level; +numbers without sign correspond to GPIO at "high" level. +The value "n" can either be the GPIO number on the host system or the +string "rts", "dtr" or "brk". The strings "rts" and "dtr" drive the +corresponding UART's modem lines RTS and DTR as GPIO. +The string "brk" forces the UART to send a BREAK sequence on TX line; +after BREAK the UART is returned in normal "non\-break" mode. +Note: the string "\-brk" has no effect and is ignored. +.PD + +.P +Note that the exit sequence is only executed if -R is specified. If -R is specified, but no exit sequence, a software-triggered reset will be performed. + +.PD 0 +As example, let's suppose the following connection between host and STM32: +.IP \(bu 2 +host GPIO_3 connected to reset pin of STM32; +.IP \(bu 2 +host GPIO_4 connected to STM32 pin BOOT0; +.IP \(bu 2 +host GPIO_5 connected to STM32 pin BOOT1. +.PD +.P + +In this case, the sequence to enter in bootloader mode is: first put +GPIO_4="high" and GPIO_5="low"; then send reset pulse by GPIO_3="low" +followed by GPIO_3="high". +The corresponding string for +.I GPIO_string +is "4,\-5,\-3,3". + +To exit from bootloader and run the application program, the sequence is: +put GPIO_4="low"; then send reset pulse. +The corresponding string for +.I GPIO_string +is "\-4,\-3,3". + +The complete command line flag is "\-R \-i 4,\-5,\-3,3:\-4,\-3,3". + +STM32W uses pad PA5 to select boot mode; if during reset PA5 is "low" then +STM32W will enter in bootloader mode; if PA5 is "high" it will execute the +program in flash. + +As example, supposing GPIO_3 connected to PA5 and GPIO_2 to STM32W's reset. +The command: +.PD 0 +.RS +stm32flash \-R \-i \-3,\-2,2:3,\-2,2 /dev/ttyS0 +.RE +provides: +.IP \(bu 2 +entry sequence: GPIO_3=low, GPIO_2=low, GPIO_2=high +.IP \(bu 2 +exit sequence: GPIO_3=high, GPIO_2=low, GPIO_2=high +.PD + +.SH EXAMPLES +Get device information: +.RS +.PD 0 +.P +stm32flash /dev/ttyS0 +.PD +.RE + +Write with verify and then start execution: +.RS +.PD 0 +.P +stm32flash \-w filename \-v \-g 0x0 /dev/ttyS0 +.PD +.RE + +Read flash to file: +.RS +.PD 0 +.P +stm32flash \-r filename /dev/ttyS0 +.PD +.RE + +Start execution: +.RS +.PD 0 +.P +stm32flash \-g 0x0 /dev/ttyS0 +.PD +.RE + +Specify: +.PD 0 +.IP \(bu 2 +entry sequence: RTS=low, DTR=low, DTR=high +.IP \(bu 2 +exit sequence: RTS=high, DTR=low, DTR=high +.P +.RS +stm32flash \-R \-i \-rts,\-dtr,dtr:rts,\-dtr,dtr /dev/ttyS0 +.PD +.RE + +.SH FORMAT CONVERSION +Flash images provided by ST or created with ST tools are often in file +format Motorola S\-Record. +Conversion between raw binary, intel hex and Motorola S\-Record can be +done through software package SRecord. + +.SH AUTHORS +The original software package +.B stm32flash +is written by +.I Geoffrey McRae +and is since 2012 maintained by +.IR "Tormod Volden " . + +Man page and extension to STM32W and I2C are written by +.IR "Antonio Borneo " . + +Please report any bugs at the project homepage +http://stm32flash.sourceforge.net . + +.SH SEE ALSO +.BR "srec_cat" "(1)," " srec_intel" "(5)," " srec_motorola" "(5)." + +The communication protocol used by ST bootloader is documented in +following ST application notes, depending on communication port. +The current version of +.B stm32flash +only supports +.I UART +and +.I I2C +ports. +.PD 0 +.P +.IP \(bu 2 +AN3154: CAN protocol used in the STM32 bootloader +.P +.RS +http://www.st.com/web/en/resource/technical/document/application_note/CD00264321.pdf +.RE + +.P +.IP \(bu 2 +AN3155: USART protocol used in the STM32(TM) bootloader +.P +.RS +http://www.st.com/web/en/resource/technical/document/application_note/CD00264342.pdf +.RE + +.P +.IP \(bu 2 +AN4221: I2C protocol used in the STM32 bootloader +.P +.RS +http://www.st.com/web/en/resource/technical/document/application_note/DM00072315.pdf +.RE + +.P +.IP \(bu 2 +AN4286: SPI protocol used in the STM32 bootloader +.P +.RS +http://www.st.com/web/en/resource/technical/document/application_note/DM00081379.pdf +.RE + +.PD + + +Boot mode selection for STM32 is documented in ST application note +AN2606, available from the ST website: +.PD 0 +.P +http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf +.PD + +.SH LICENSE +.B stm32flash +is distributed under GNU GENERAL PUBLIC LICENSE Version 2. +Copy of the license is available within the source code in the file +.IR "gpl\-2.0.txt" . diff --git a/stm32flash_src/utils.c b/stm32flash_src/utils.c new file mode 100644 index 0000000..271bb3e --- /dev/null +++ b/stm32flash_src/utils.c @@ -0,0 +1,45 @@ +/* + stm32flash - Open Source ST STM32 flash program for *nix + Copyright (C) 2010 Geoffrey McRae + + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public License + as published by the Free Software Foundation; either version 2 + of the License, or (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. +*/ + +#include +#include "utils.h" + +/* detect CPU endian */ +char cpu_le() { + const uint32_t cpu_le_test = 0x12345678; + return ((const unsigned char*)&cpu_le_test)[0] == 0x78; +} + +uint32_t be_u32(const uint32_t v) { + if (cpu_le()) + return ((v & 0xFF000000) >> 24) | + ((v & 0x00FF0000) >> 8) | + ((v & 0x0000FF00) << 8) | + ((v & 0x000000FF) << 24); + return v; +} + +uint32_t le_u32(const uint32_t v) { + if (!cpu_le()) + return ((v & 0xFF000000) >> 24) | + ((v & 0x00FF0000) >> 8) | + ((v & 0x0000FF00) << 8) | + ((v & 0x000000FF) << 24); + return v; +} diff --git a/stm32flash_src/utils.h b/stm32flash_src/utils.h new file mode 100644 index 0000000..a8d37d2 --- /dev/null +++ b/stm32flash_src/utils.h @@ -0,0 +1,30 @@ +/* + stm32flash - Open Source ST STM32 flash program for *nix + Copyright (C) 2010 Geoffrey McRae + + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public License + as published by the Free Software Foundation; either version 2 + of the License, or (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. +*/ + + +#ifndef _H_UTILS +#define _H_UTILS + +#include + +char cpu_le(); +uint32_t be_u32(const uint32_t v); +uint32_t le_u32(const uint32_t v); + +#endif