Skip to content

Commit

Permalink
deploy: b880f9c
Browse files Browse the repository at this point in the history
  • Loading branch information
@EverythingSmartHome
EverythingSmartHome committed Oct 19, 2024
1 parent c622a7b commit 6764b1a
Show file tree
Hide file tree
Showing 2 changed files with 154 additions and 102 deletions.
60 changes: 3 additions & 57 deletions modules/carbon-dioxide.md
View file
Original file line number Diff line number Diff line change
Expand Up @@ -27,63 +27,9 @@ Grab your CO2 module and push it onto the pins, making sure to line up the 3.3v

## Software

You will need the ESPHome add-on installed in Home Assistant and the code for your Everything Presence One adopted (you should be automatically prompted to do this if you haven't already done so).

Once you have your config showing up in the ESPHome dashboard, hit edit on the config.

Then at the bottom of the config, add the following lines. These will differ depending on your Everything Presence One board revision. The board revision number is marked in the bottom left hand corner of the Everything Presence One board.

**If you have revision 1.3 or 1.4:**

```
i2c:
- id: bus_a
sda: GPIO26
scl: GPIO25
scan: True
- id: bus_b
sda: GPIO18
scl: GPIO19
scan: true
sensor:
- id: !extend illuminance_sensor
i2c_id: bus_a
- id: !extend shtc3_sensor
i2c_id: bus_a
- platform: scd4x
i2c_id: bus_b
co2:
name: "CO2"
```

**If you have revision 1.5:**

```
i2c:
- id: bus_a
sda: GPIO26
scl: GPIO25
scan: True
- id: bus_b
sda: GPIO18
scl: GPIO22
scan: true
sensor:
- id: !extend illuminance_sensor
i2c_id: bus_a
- id: !extend shtc3_sensor
i2c_id: bus_a
- platform: scd4x
i2c_id: bus_b
co2:
name: "CO2"
```

Then hit save and install to complete.
You will need to install the CO2 version of the firmware by heading over to the [update page](https://everythingsmarthome.github.io/everything-presence-one/updating.html), selecting Home Assistant, select your mmwave sensor, select CO2, select board revision and then choose between the Bluetooth or Non-Bluetooth versions of the firmware. Finally hit the Connect button and follow the instructions.

Once installed, the CO2 sensor should automatically show up in Home Assistant, nice!

{: .note }
If your ESPHome config produces an error when trying to install, try hitting the "clean build files" button on the config to clear your cache, then try again.
Expand Down
196 changes: 151 additions & 45 deletions updating.md
View file
Original file line number Diff line number Diff line change
Expand Up @@ -13,7 +13,7 @@ This page will help you to flash and update your Everything Presence One to the

## Everything Presence One ESPHome Firmware Install

Here you can install the latest [ESPHome](https://esphome.io) firmware on the Everything Presence One board for direct integration with [Home Assistant](https://home-assistant.io) or Samsung Smartthings (Beta).
Here you can install the latest firmware on the Everything Presence One for direct integration with [Home Assistant](https://home-assistant.io) or Samsung Smartthings (Beta).

First, make sure you have the EP1 connected to a USB port on your computer and select the platform you would like to install below. Hit the connect button, select the USB port from the list and then hit the install button to begin installing the latest software on your Everything Presence One.

Expand Down Expand Up @@ -50,6 +50,7 @@ After clicking the "Connect" button, if you do not see a "USB Serial" port liste
</label>
</div>

<!-- Sensor Model Options -->
<div id="sensorModelOptions" class="hidden">
<div class="question-prompt">Select Your mmWave Sensor Model:</div>
<div class="types">
Expand All @@ -76,6 +77,57 @@ After clicking the "Connect" button, if you do not see a "USB Serial" port liste
</div>
</div>

<!-- Add-on Module Options -->
<div id="addonModuleOptions" class="hidden">
<div class="question-prompt">Select Add-on Module:</div>
<div class="types">
<label>
<input type="radio" name="addonModule" value="No Add-on Module" />
<div class="option-content">
<div>
<div class="title">No Add-on Module</div>
<div class="description">Proceed without any add-on module.</div>
</div>
</div>
</label>
<label>
<input type="radio" name="addonModule" value="CO2 Module" />
<div class="option-content">
<div>
<div class="title">CO2 Module</div>
<div class="description">Select this if you are using the CO2 add-on module.</div>
</div>
</div>
</label>
</div>
</div>

<!-- Board Revision Options -->
<div id="boardRevisionOptions" class="hidden">
<div class="question-prompt">Select Board Revision:</div>
<div class="types">
<label>
<input type="radio" name="boardRevision" value="1.3/1.4" />
<div class="option-content">
<div>
<div class="title">Revision 1.3/1.4</div>
<div class="description">Select this if your board revision is 1.3 or 1.4.</div>
</div>
</div>
</label>
<label>
<input type="radio" name="boardRevision" value="1.5" />
<div class="option-content">
<div>
<div class="title">Revision 1.5</div>
<div class="description">Select this if your board revision is 1.5.</div>
</div>
</div>
</label>
</div>
</div>

<!-- Home Assistant Options -->
<div id="homeAssistantOptions" class="hidden">
<div class="question-prompt">Select Firmware Type:</div>
<div class="types">
Expand All @@ -98,6 +150,7 @@ After clicking the "Connect" button, if you do not see a "USB Serial" port liste
</div>
</div>

<!-- Firmware Version Options -->
<div id="firmwareVersionOptions" class="hidden">
<div class="question-prompt">Select Firmware Version:</div>
<div class="types">
Expand All @@ -120,6 +173,7 @@ After clicking the "Connect" button, if you do not see a "USB Serial" port liste
</div>
</div>

<!-- SmartThings Sensor Options -->
<div id="smartThingsSensorOptions" class="hidden">
<div class="question-prompt">Select Your mmWave Sensor Model for SmartThings:</div>
<div class="types">
Expand All @@ -146,11 +200,13 @@ After clicking the "Connect" button, if you do not see a "USB Serial" port liste
</div>
</div>


<!-- Summary and Install Button -->
<div id="summary" class="summary hidden">
<h3>You are flashing:</h3>
<p id="summaryPlatform"></p>
<p id="summarySensor"></p>
<p id="summaryAddonModule"></p>
<p id="summaryBoardRevision"></p>
<p id="summaryOption"></p>
</div>
<esp-web-install-button class="hidden"></esp-web-install-button>
Expand All @@ -172,6 +228,8 @@ With the EP1 fully updated and connected to WiFi, the final step is to connect i
document.addEventListener("DOMContentLoaded", function() {
const homeAssistantOptions = document.getElementById("homeAssistantOptions");
const sensorModelOptions = document.getElementById("sensorModelOptions");
const addonModuleOptions = document.getElementById("addonModuleOptions");
const boardRevisionOptions = document.getElementById("boardRevisionOptions");
const smartThingsSensorOptions = document.getElementById("smartThingsSensorOptions");
const firmwareVersionOptions = document.getElementById("firmwareVersionOptions");
const summary = document.getElementById("summary");
Expand All @@ -180,6 +238,8 @@ document.addEventListener("DOMContentLoaded", function() {
function clearAndHideOptions() {
homeAssistantOptions.classList.add("hidden");
sensorModelOptions.classList.add("hidden");
addonModuleOptions.classList.add("hidden");
boardRevisionOptions.classList.add("hidden");
smartThingsSensorOptions.classList.add("hidden");
firmwareVersionOptions.classList.add("hidden");
summary.classList.add("hidden");
Expand All @@ -194,7 +254,7 @@ document.addEventListener("DOMContentLoaded", function() {
}

document.querySelectorAll('input[name="platform"]').forEach(radio => {
radio.addEventListener("change", function() {
radio.addEventListener("change", function(event) {
handleRadioButtonChange(event, '.types');
clearAndHideOptions();
if (this.value === "Home Assistant") {
Expand All @@ -206,80 +266,126 @@ document.addEventListener("DOMContentLoaded", function() {
});

document.querySelectorAll('input[name="sensorModel"]').forEach(radio => {
radio.addEventListener("change", function() {
radio.addEventListener("change", function(event) {
handleRadioButtonChange(event, '#sensorModelOptions .types');
homeAssistantOptions.classList.remove("hidden");
addonModuleOptions.classList.remove("hidden");
});
});

document.querySelectorAll('input[name="stSensorModel"]').forEach(radio => {
radio.addEventListener("change", function() {
handleRadioButtonChange(event, '#smartThingsSensorOptions .types');
updateSummary("Smartthings", this.value, "Stable");
document.querySelectorAll('input[name="addonModule"]').forEach(radio => {
radio.addEventListener("change", function(event) {
handleRadioButtonChange(event, '#addonModuleOptions .types');
if (this.value === "CO2 Module") {
boardRevisionOptions.classList.remove("hidden");
} else {
boardRevisionOptions.classList.add("hidden");
homeAssistantOptions.classList.remove("hidden");
}
});
});

document.querySelectorAll('input[name="boardRevision"]').forEach(radio => {
radio.addEventListener("change", function(event) {
handleRadioButtonChange(event, '#boardRevisionOptions .types');
homeAssistantOptions.classList.remove("hidden");
});
});

document.querySelectorAll('input[name="haOption"]').forEach(radio => {
radio.addEventListener("change", function() {
radio.addEventListener("change", function(event) {
handleRadioButtonChange(event, '#homeAssistantOptions .types');
firmwareVersionOptions.classList.remove("hidden");
});
});

document.querySelectorAll('input[name="firmwareVersion"]').forEach(radio => {
radio.addEventListener("change", function() {
radio.addEventListener("change", function(event) {
handleRadioButtonChange(event, '#firmwareVersionOptions .types');
const selectedVersion = this.value;
const selectedOption = document.querySelector('input[name="haOption"]:checked').value;
const selectedSensorModel = document.querySelector('input[name="sensorModel"]:checked').value;
updateSummary("Home Assistant", selectedSensorModel, `${selectedOption} - ${selectedVersion}`);
const addonModule = document.querySelector('input[name="addonModule"]:checked') ? document.querySelector('input[name="addonModule"]:checked').value : "No Add-on Module";
const boardRevision = document.querySelector('input[name="boardRevision"]:checked') ? document.querySelector('input[name="boardRevision"]:checked').value : "";

updateSummary("Home Assistant", selectedSensorModel, `${selectedOption} - ${selectedVersion}`, addonModule, boardRevision);
});
});

function updateSummary(platform, sensorModel, firmware) {
document.querySelectorAll('input[name="stSensorModel"]').forEach(radio => {
radio.addEventListener("change", function(event) {
handleRadioButtonChange(event, '#smartThingsSensorOptions .types');
updateSummary("Smartthings", this.value, "Stable");
});
});

function updateSummary(platform, sensorModel, firmware, addonModule, boardRevision) {
document.getElementById("summaryPlatform").textContent = "Platform: " + platform;
document.getElementById("summarySensor").textContent = "Sensor Model: " + sensorModel;
document.getElementById("summaryOption").textContent = "Firmware: " + firmware;

if (addonModule && addonModule !== "No Add-on Module") {
document.getElementById("summaryAddonModule").textContent = "Add-on Module: " + addonModule;
} else {
document.getElementById("summaryAddonModule").textContent = "";
}

if (boardRevision) {
document.getElementById("summaryBoardRevision").textContent = "Board Revision: " + boardRevision;
} else {
document.getElementById("summaryBoardRevision").textContent = "";
}

summary.classList.remove("hidden");
installButton.classList.remove("hidden");

let manifestUrl = determineManifestUrl(platform, sensorModel, firmware);
installButton.setAttribute("manifest", manifestUrl);
let manifestUrl = determineManifestUrl(platform, sensorModel, firmware, addonModule, boardRevision);
if (manifestUrl) {
installButton.setAttribute("manifest", manifestUrl);
} else {
installButton.classList.add("hidden");
}
}

function determineManifestUrl(platform, sensorModel, firmware) {
let manifestUrl = "";
if (platform === "Home Assistant") {
if (sensorModel === "DFRobot SEN0395") {
if (firmware === "Bluetooth - Stable") {
manifestUrl = "https://everythingsmarthome.github.io/everything-presence-one/everything-presence-one-ble-manifest.json";
} else if (firmware === "Bluetooth - Beta") {
manifestUrl = "https://everythingsmarthome.github.io/everything-presence-one/everything-presence-one-ha-ble-beta-manifest.json";
} else if (firmware === "No-Bluetooth - Stable") {
manifestUrl = "https://everythingsmarthome.github.io/everything-presence-one/everything-presence-one-manifest.json";
} else if (firmware === "No-Bluetooth - Beta") {
manifestUrl = "https://everythingsmarthome.github.io/everything-presence-one/everything-presence-one-ha-beta-manifest.json";
function determineManifestUrl(platform, sensorModel, firmware, addonModule, boardRevision) {
let baseName = "";

if (platform === "Home Assistant") {
if (sensorModel === "DFRobot SEN0609") {
baseName = "everything-presence-one-sen0609";
} else {
baseName = "everything-presence-one";
}
} else if (sensorModel === "DFRobot SEN0609") {
if (firmware === "Bluetooth - Stable") {
manifestUrl = "https://everythingsmarthome.github.io/everything-presence-one/everything-presence-one-sen0609-ble-manifest.json";
} else if (firmware === "No-Bluetooth - Stable") {
manifestUrl = "https://everythingsmarthome.github.io/everything-presence-one/everything-presence-one-sen0609-manifest.json";
} else if (firmware === "Bluetooth - Beta") {
manifestUrl = "https://everythingsmarthome.github.io/everything-presence-one/everything-presence-one-sen0609-ble-manifest.json";
} else if (firmware === "No-Bluetooth - Beta") {
manifestUrl = "https://everythingsmarthome.github.io/everything-presence-one/everything-presence-one-sen0609-manifest.json";

if (sensorModel === "DFRobot SEN0609" && firmware.includes("Beta")) {
alert("Beta firmware is not available for DFRobot SEN0609 sensor model.");
return null;
}

if (firmware.includes("Beta") && sensorModel !== "DFRobot SEN0609") {
baseName += "-beta";
}

if (firmware.includes("Bluetooth")) {
baseName += "-ble";
}

if (addonModule === "CO2 Module") {
baseName += "-co2";
if (boardRevision === "1.3/1.4") {
baseName += "-rev1.3";
}
}

} else if (platform === "Smartthings") {
if (sensorModel === "DFRobot SEN0609") {
baseName = "everything-presence-one-st-sen0609";
} else {
baseName = "everything-presence-one-st";
}
}
} else if (platform === "Smartthings") {
if (sensorModel === "DFRobot SEN0395") {
manifestUrl = "https://everythingsmarthome.github.io/everything-presence-one/everything-presence-one-st-manifest.json";
} else if (sensorModel === "DFRobot SEN0609") {
manifestUrl = "https://everythingsmarthome.github.io/everything-presence-one/everything-presence-one-sen0609-st-manifest.json";
}
}
return manifestUrl;
}

let manifestUrl = `https://everythingsmarthome.github.io/everything-presence-one/${baseName}-manifest.json`;
return manifestUrl;
}
});
</script>

0 comments on commit 6764b1a

Please sign in to comment.