diff --git a/docs/source/user_guide/project_commands/cmd_upload.rst b/docs/source/user_guide/project_commands/cmd_upload.rst
deleted file mode 100644
index 210ee528..00000000
--- a/docs/source/user_guide/project_commands/cmd_upload.rst
+++ /dev/null
@@ -1,104 +0,0 @@
-.. _cmd_upload:
-
-apio upload
-===========
-
-.. contents::
-
-Usage
------
-
-.. code::
-
-    apio upload [OPTIONS]
-
-Description
------------
-
-Upload the bitstream to the FPGA. It builds the project if required.
-
-It also performs an automatic discovery and validation of the FTDI chip depending on the selected board.
-
-Required packages: ``scons``, ``system``, ``icestorm``.
-
-.. note::
-
-  FTDI driver configuration must be done before upload. More information in :ref:`cmd_drivers`.
-
-Options
--------
-
-.. program:: apio upload
-
-.. option::
-    -b, --board
-
-Select a specific board.
-
-.. option::
-    --serial-port
-
-Select a specific serial port. You can check the available serial devices with the command ``apio system --lsserial``.
-
-.. option::
-    --ftdi-id
-
-Select a specific FTDI index. You can check the available FTDI indexes with the command ``apio system --lsftdi``.
-This numerical index is provided by **libftdi1**, that is different from *libftdi0*.
-
-.. option::
-    -s, --sram
-
-Perform SRAM programming. Only available for `iceprog` compatible boards.
-
-.. option::
-    -p, --project-dir
-
-Set the target directory for the project.
-
-.. option::
-    -v, --verbose
-
-Show the entire output of the command.
-
-.. option::
-    --verbose-yosys
-
-Show the yosys output of the command.
-
-.. option::
-    --verbose-arachne
-
-Show the arachne output of the command.
-
-.. note::
-
-  All available boards, FPGAs, sizes, types and packs are showed in :ref:`cmd_boards`
-
-Examples
---------
-
-1. Upload the *leds example*
-
-.. code::
-
-  $ apio upload
-  [] Processing icezum
-  ---------------------------------------------------------------------------------------------
-  [...]
-  iceprog -d i:0x0403:0x6010:0 hardware.bin
-  init..
-  cdone: high
-  reset..
-  cdone: low
-  flash ID: 0x20 0xBA 0x16 0x10 0x00 0x00 0x23 0x51 0x85 0x32 0x13 0x00 0x54 0x00 0x29 0x10 0x06 0x15 0x51 0x62
-  file size: 32220
-  erase 64kB sector at 0x000000..
-  programming..
-  reading..
-  VERIFY OK
-  cdone: high
-  Bye.
-  ================================== [SUCCESS] Took 1.96 seconds ==============================
-
-.. Executing: scons -Q upload fpga_type=hx fpga_pack=tq144 fpga_size=1k device=0 -f /path/to/SConstruct