Severe ISIS TED Inconsistency

[Hawkins-Sherpherd]

Description

I run ISIS on tunnels. ISIS run well on those tunnels, able to exchange ISIS packets normally. But when I try to implement MPLS-TE, ISIS TED go wrong.

I can see MPLS-TE enabled interfaces have complete information in "show isis database detail" and "show isis mpls-te interface", but in "show isis mpls-te database edge", I can only see partial MPLS-TE enabled interface has been learned. Even worse, every node learn different TED edges, totally inconsistent.

Outputs can be seen here:

• (show isis mpls-te interface)
• (show isis database detail)
• (show isis mpls-te database edge detail)

They are all running in a private experimental network. Nothing open.

Version

FRRouting 9.1
FRRouting 10.0

How to reproduce

1. Enable ISIS process
2. Enable MPLS-TE and Segment Routing for ISIS process
3. Configure loopback interface IPv6 address as MPLS-TE IPv6 router address
4. Add Segment Routing SID for IPv6 address on loopback interface
5. Assign unnumbered IPv4 address for interfaces
6. Assign ULA IPv6 address for interfaces
7. Add interfaces to ISIS process
8. Set "isis network point-to-point"
9. Add link-params for interfaces
10. See link-params added interfaces shown up in "show isis mpls-te interface" and "show isis database detail" with complete information

Expected behavior

TED have full synchronization with ISIS database.

Actual behavior

TED don't have full synchronization on any node. Only several random edge have learned from ISIS database.

Additional context

No response

Checklist

• I have searched the open issues for this bug.
• I have not included sensitive information in this report.

[Hawkins-Sherpherd]

Switching tunnel protocol to GRETAP, the inconsistency has decreased.

[pguibert6WIND]

Switching tunnel protocol to GRETAP, the inconsistency has decreased.

@Hawkins-Sherpherd , have you checked you are configured in point to point ? isis network point-to-point

[Hawkins-Sherpherd]

Switching tunnel protocol to GRETAP, the inconsistency has decreased.

@Hawkins-Sherpherd , have you checked you are configured in point to point ? isis network point-to-point

I'm sure they are configured point to point.

[odd22]

Can you send us the complete IS-IS and interface configuration you used as well as the output of "show isis database detail" and finally the output of "show isis mpls-te database detail"?
In particular, do you check that "link-params" are setup on each interfaces advertises by ISIS?

[github-actions]

This issue is stale because it has been open 180 days with no activity. Comment or remove the autoclose label in order to avoid having this issue closed.

[frrbot]

This issue will be automatically closed in the specified period unless there is further activity.