Display freezes after a few seconds

[butterrsoft]

Hi, i have an SSD1306 128x64 OLED display, and it freezes about 10 seconds the stick is plugged in. Hot-plugging the OLED makes it work for another ten seconds or so.

Also, after powering down the stick, if i plug it back in right away the display rarely comes up. Hot-plugging the OLED does nothing there.

I have a couple more OLEDs on order from another seller and will try to figure out if the display itself is the issue.

[TheTrainGoes]

Hi @butterrsoft ,

We have seen compatibility issues with various clone displays from vendors on AliExpress and the like. Please let us know if the replacement units exhibit the same behaviour. Also please let us know what firmware you are using on the Pico and also have you have your unit wired up.

As a note - This project is no longer maintained. Please check out the Community Edition project and post your issue there if it continues. The Community Edition issues section can be found here: https://github.com/OpenStickFoundation/GP2040-CE/issues