x20rs s port

[stubugs]

ugraded x20rs to 1.6 and int module to 3.0.1 boot loader and system and luas etc
upgraded Tw r6 to 3.0.1
upgraded Tw sr8 to 3.0.1 performed reset
both working great with tx
but
Tw r6 picks up s port 150 amp current sensor all telemetry showing and lipo sensor
plug same 150 s port sensor in Tw sr6 all telemetry of rx comes on but no 150 amp current sensor showing also tried in tw sr6 lipo sensor sport witch does not register either tried another lead on rx too still not working but red led does light up on 150 and lipo sensor

[SmartTommy]

Hi, we have never produced "TWSR6" before,do you mean "TDSR6" or "TWGR6"?

[stubugs]

The frsky twin sr8 reciever
https://www.frsky-rc.com/tw-sr8/
It worked on previous firmware

[SmartTommy]

The frsky twin sr8 reciever https://www.frsky-rc.com/tw-sr8/ It worked on previous firmware

i test the firmware 3.0.1 TWSR8, connect s.port to the FAS150, it works well

[stubugs]

These are what I use but do not work i have 4 of them

[mawzthefinn]

You have the FAS150 connected to the 4-pin S.Port/FBus header on the TW SR8 and you have Telem. Mode set to S.Port in Receiver Options, right?

[stubugs]

Yes and I tried another 4pin to servo lead same result