Slingbox password retrieval #459
Replies: 34 comments 30 replies
-
|
What kind of Slingbox is it? |
Beta Was this translation helpful? Give feedback.
-
|
Looks like it is a M1 model. He has not received it as yet - currently en route to him. |
Beta Was this translation helpful? Give feedback.
-
|
Just following up on this - I have 3 units (all 350s) working perfectly (using VLC as the client). They were all on my account originally, so I had the associated email in order to extract the hardware pwd using your curl procedure. Just received a M1 model the neighbor ordered off eBay. We do not have the email addr associated with this unit. It's being seen on the network fine by Slinger and this unit was clearly registered on their servers since it has a name in it. I can get everything I need from what dumps on the screen when I run slingbox_server, (finderID, port, IP, unit name) but, I obviously need the hardware password. Anyway to obtain that without having the email that was associated with the box? I do not want to reset it yet for fear of bricking it. |
Beta Was this translation helpful? Give feedback.
-
|
Hi
Again, fantastic job on making the old Slingboxes work again! I have been
looking all over for a solution to this. Frankly your sling server solution
is SUPERIOR to what Sling folks had thanks in large part to a) the ability
to serve out multiple streams per Slingbox, and your system seems to be FAR
more reliable than what Sling offered.
Any idea on the M1 Slingbox that's due to arrive at my neighbor with no
accompanying associated email addr? Should I tell him to send it back and
find one WITH an email?
Thanks again in advance.
Steve
…On Wed, Dec 28, 2022 at 1:06 AM GerryDazoo ***@***.***> wrote:
What kind of Slingbox is it?
—
Reply to this email directly, view it on GitHub
<#459 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/A47GZKMUOXQHRBRLGOTQGSLWPPKIBANCNFSM6AAAAAATK47L2E>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
there are a few on ebay where some ppl have jacked up the price for the password and login. However, you might not need it. This guy figured out that on a hard reset for the SB500 the password is "admin" and when you run the slinger you will find the finderid. https://www.youtube.com/watch?v=EUyQfpzHRkg The video is choppy but here are the steps on a hard reset:
I had to do it on my SB500 and followed the video (was a bit difficult to understand at first) - hopefully this breakdown should help as well. |
Beta Was this translation helpful? Give feedback.
-
|
Thanks for the feedback. The unit I am having the issue with is a M1 model. I did buy another SB350 from someone who had the Sling login credentials and I was able to extract the admin pwd for that one using Postman (have a total of 4 working now), except I cannot get the remote function to work on that last one as yet. Anyone know if the SB300 works with Slinger? Guy I bought the 350 from also has a 300 (the pwd for which also came back when I pulled down the data for the 350). If the SB300 works I will ask him to send me that one too. |
Beta Was this translation helpful? Give feedback.
-
|
Can you be a little more specific about "can't get the remote function to work"? I suspect the video source was previously configured for a different STB. |
Beta Was this translation helpful? Give feedback.
-
|
A bit more on the Remote control issue - the previous owner of the SB350 I'm having the remote issue with stated: "... I remember I had to find a driver for the remote on the Internet. Then I had to select the “other” option (or whatever Sling called it) to get it to load the remote driver. " I tried changing the video source from 1 to 0 in config.ini but that did not appear to make any difference. |
Beta Was this translation helpful? Give feedback.
-
|
Sorry about the vague description.
On the Slinger console, I can see the IR codes being received when I send
them from the browser Remote (http://slingerserver:portnum/Remote), but the
codes are not being transmitted to the STB. Have tried different IR
blasters to see if it was a bad blaster. The regular physical STB Remote
works so I know the STB IR receiver works - also if I put that STB beside
another STB/Slingbox that's connected to slinger, if I change channels on
the other STB with Slinger both STBs will change channel, so I know the STB
is working. Something weird in the setup of the Slingbox I presume as
Slinger seems to be doing exactly what it should be.
…On Wed, Jan 11, 2023 at 5:33 AM GerryDazoo ***@***.***> wrote:
Can you be a little more specific about "can't get the remote function to
work"? I suspect the video source was previously configured for a different
STB.
—
Reply to this email directly, view it on GitHub
<#459 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/A47GZKI4WQXYW3657SJJBMLWR2D7TANCNFSM6AAAAAATK47L2E>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
You neglected to mention if box STBs are identical. |
Beta Was this translation helpful? Give feedback.
-
|
They are all SB350s, but I have not checked to see if they are different
revisions. I am offsite at the moment but I can check to see if there are
any differences in SB revisions later today. Not sure how to check firmware
differences in them however.
I am running separate instances of Slinger on my Win10 box (I am not yet
using one consolidated config file). My config.ini between the 3 working
units and the one with the Remote issue are the same (with appropriate
changes for SB names, port nums etc).
…On Thu, Jan 12, 2023 at 10:59 AM GerryDazoo ***@***.***> wrote:
You neglected to mention if box STBs are identical.
—
Reply to this email directly, view it on GitHub
<#459 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/A47GZKMH6UOJDXIBW5BWT3LWSAS5XANCNFSM6AAAAAATK47L2E>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
You don't need separate instances of Slinger just put all your config files on the command line |
Beta Was this translation helpful? Give feedback.
-
|
Sorry re-read your question - yes all STBs are the same model. I misread
and thought you asked if all the SBs were identical.
…On Thu, Jan 12, 2023 at 10:59 AM GerryDazoo ***@***.***> wrote:
You neglected to mention if box STBs are identical.
—
Reply to this email directly, view it on GitHub
<#459 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/A47GZKMH6UOJDXIBW5BWT3LWSAS5XANCNFSM6AAAAAATK47L2E>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
SO I added a 5th Slingbox to my setup today, and both units I obtained from eBay work fine as far as video and audio, but, I have the same issue with the Remote not working. The client is sending the codes fine, and I can see them being received, and when I send the codes, the video and audio in the VLC client pause slightly, but the codes are clearly not making it out to the IR blaster. Have tried different STBs (I am using Frontier STBs, all the same type), have also tried different IR blasters. I am doing this testing with all other Sling streamers shutdown, so just testing the one that is offending. One thing I did note (and clearly this must have something to do with the issue) is when the client connects, the "Keycodes" echo to the console is empty - i.e Keycodes=[ ] I am using VLC as the client app to do this testing. Open to any suggestions - hopefully it is a implementation or finger error on my part that is reasonably easy to fix. |
Beta Was this translation helpful? Give feedback.
-
|
Keycodes = [] means you're using an unconfigured VideoSource. The slingbox does not know the info it needs to send out the IR data to the STB. You need to configure the VideoSource you're using. PS, Please next time post ALL the server output and and copy of your config file and please post the text and not a screen shot PPS. Comment out your FinderID in your config,ini. You obviously have not configured your router properly to allow remote access. |
Beta Was this translation helpful? Give feedback.
-
|
Yup - I figured that out last night, that the problem is the keycodes in
these boxes I got online do not have the correct keycodes defined for the
video source. External access for me works fine via a port forward, and I
did disable the finderids last night.
Trouble is I do not know how to define the keycodes; I tried using the
Sling Player Desktop (I found ver 2.0 on Cnet) to do this but of course
that will not let me get into Settings, since it appears to auth against
the now defunct Sling servers. Been reading your docs but I have not yet
found where/how to define key codes. Also been trying to get the
consolidated config.ini working, and I have it working to connect the
audio/video streams to all 5 of the Slingboxes I am testing, however I
cannot get the Remote web page to connect in that setting. So clearly I am
missing something basic in the Remote setup. I created a remote.txt, each
with a different name corresponding to each Slingbox definition in
config.ini, but all are the same (a copy of the standard remote.txt).
As mentioned, Remote worked fine under individual instances of
slingbox_server, but in the consolidated config either I'm entering the
incorrect URL, or my definition in the config.ini is wrong/missing an
entry. Slinbgboxes rp4 and rp5 are the ones that I cannot get to change
channels when running individual instances, but, as mentioned, I
complicated my world by attempting to get the consolidated config working
as well it looks like :-)
My config.ini
[SLINGBOXES]
sb1=rp1
sb2=rp2
sb3=rp3
sb4=rp4
sb5=rp5
[rp1]
sbtype="350/500/M1/M2"
password=E1:e25c62680d7636b0e50b5b874680c6xxxxx50914a914ac3da7104e0bd8166b06
ipaddress=192.168.1.47
port=5205
name=" RP1-FamRm"
Resolution=12
FrameRate=30
VideoBandwidth=2000
VideoSmoothness=63
IframeRate=5
VideoSource = 1
StartChannel=634
;RemoteLock=Yes
Remote=rp1_remote.txt
[rp2]
sbtype="350/500/M1/M2"
password=E1:446b004ee6891b9489b7fdc339a1xxxxx898521dfb73b6e3686b093a1b507885
ipaddress=192.168.1.100
port=5221
name=" RP2 - Office"
Resolution=12
FrameRate=30
VideoBandwidth=2000
VideoSmoothness=63
IframeRate=5
VideoSource = 1
StartChannel=600
;RemoteLock=Yes
Remote=rp2_remote.txt
[rp3]
sbtype="350/500/M1/M2"
password=E1:b7b1fa1f2dd916871xxxxxxe66c7cb06798d093ec8818f3b0206995a4a85bd9c
ipaddress=192.168.1.67
port=5223
name=" RP3 - Back"
Resolution=12
FrameRate=30
VideoBandwidth=2000
VideoSmoothness=63
IframeRate=5
VideoSource = 1
;StartChannel=600
;RemoteLock=Yes
Remote=rp3_remote.txt
[rp4]
sbtype="350/500/M1/M2"
password=PXxxxxxHGp3T5wAx
ipaddress=192.168.1.54
port=5201
name=" RP4 - Back"
Resolution=12
FrameRate=30
VideoBandwidth=2000
VideoSmoothness=63
IframeRate=5
VideoSource = 1
;StartChannel=600
;RemoteLock=Yes
Remote=rp4_remote.txt
[rp5]
sbtype="350/500/M1/M2"
password=E1:2120864a9c9fa98fdba51xxxxx07bd83d3474e55201329b3fdb5c19f8ba5ee7e
ipaddress=192.168.1.77
port=5212
name=" RP5 - MBR"
Resolution=12
FrameRate=30
VideoBandwidth=2000
VideoSmoothness=63
IframeRate=5
VideoSource = 1
;StartChannel=600
;RemoteLock=Yes
Remote=rp5_remote.txt
[SERVER]
;local port number for the server to listen on for connections
port=35400
maxstreams=10
maxremotestreams=5
enableremote=yes
URLbase=r
Console output with errors from one session
Version : 3.08f Running on Windows-10-10.0.22621-SP0 pid= 1156
C:\Slingbox\slingbox_server.exe
Using config file config.ini
Connection Manager Running on port 35400 with 10 max streams using URL r.
BOXES [('sb1', 'rp1'), ('sb2', 'rp2'), ('sb3', 'rp3'), ('sb4', 'rp4'),
('sb5', 'rp5')]
Streamer Running: 10 config.ini rp2 rp2 35400 8388608
Streamer Running: 10 config.ini rp3 rp3 35400 8388608
Streamer Running: 10 config.ini rp1 rp1 35400 8388608
Streamer Running: 10 config.ini rp4 rp4 35400 8388608
Checking for slingbox at ('192.168.1.100', 5221)
starting up on port 35400 8388608
Checking for slingbox at ('192.168.1.67', 5223)
Checking for slingbox at ('192.168.1.54', 5201)
Checking for slingbox at ('192.168.1.47', 5205)
('192.168.1.100', 5221) OK
Streamer Running: 10 config.ini rp5 rp5 35400 8388608
" RP2 - Office" Using slingbox at ('192.168.1.100', 5221)
('192.168.1.54', 5201) OK
('192.168.1.47', 5205) OK
('192.168.1.67', 5223) OK
Checking for slingbox at ('192.168.1.77', 5212)
" RP1-FamRm" Using slingbox at ('192.168.1.47', 5205)
" RP4 - Back" Using slingbox at ('192.168.1.54', 5201)
Streamer: " RP2 - Office" Waiting for first stream, flushing any IR
requests that arrive while not connected to slingbox
" RP3 - Back" Using slingbox at ('192.168.1.67', 5223)
('192.168.1.77', 5212) OK
Streamer: " RP1-FamRm" Waiting for first stream, flushing any IR requests
that arrive while not connected to slingbox
" RP5 - MBR" Using slingbox at ('192.168.1.77', 5212)
Streamer: " RP4 - Back" Waiting for first stream, flushing any IR requests
that arrive while not connected to slingbox
Streamer: " RP3 - Back" Waiting for first stream, flushing any IR requests
that arrive while not connected to slingbox
Streamer: " RP5 - MBR" Waiting for first stream, flushing any IR requests
that arrive while not connected to slingbox
Building page for rp1
Reading Custom Remote definition from rp1_remote.txt
Building page for rp2
Reading Custom Remote definition from rp2_remote.txt
Building page for rp3
Reading Custom Remote definition from rp3_remote.txt
Building page for rp4
Reading Custom Remote definition from rp4_remote.txt
Building page for rp5
Reading Custom Remote definition from rp5_remote.txt
* Serving Flask app 'slingbox_server' (lazy loading)
* Environment: production
WARNING: This is a development server. Do not use it in a production
deployment.
Use a production WSGI server instead.
* Debug mode: off
01/18/2023, 11:26:18.456 Streaming request from ('192.168.1.112', 52781)
Slinginfo "350/500/M1/M2" 12 30 192.168.1.47 5205 3072 10
" RP1-FamRm" Starting Stream for 192.168.1.112:52781
Connecting... ('192.168.1.47', 5205) Control
" RP1-FamRm" Using encrypted password:
E1:e25c62680d7xxxxxx50b5b874680c626fd950914a914ac3da7104e0bd8166b06
" RP1-FamRm" Selecting Video Source 1
Keycodes= [1, 4, 5, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 24, 25,
26, 27, 28, 29, 30, 31, 33, 35, 36, 38, 39, 40, 41, 42, 45, 46, 53, 62, 63,
72, 73, 74, 75, 76, 77, 78, 79, 80, 81]
VideoParameters: Resolution= 12 FrameRate= 30 VideoBandwidth= 2000
VideoSmoothness= 63 IframeRate= 5 AudioBitRate= 64
Connecting... ('192.168.1.47', 5205) Stream
" RP1-FamRm" Stream started at 01/18/2023, 11:26:21.331 749 0
01/18/2023, 11:26:21.331 " RP1-FamRm" Sending Start Channel 634
sending key 14 1
sending key 11 1
sending key 12 1
.01/18/2023, 11:26:31.565 Streaming request from ('192.168.1.171', 58603)
" RP1-FamRm" Got Streamer Control Message STREAM
" RP1-FamRm" New Stream Starting 0
01/18/2023, 11:26:34.471 " RP1-FamRm" Stream Terminated for
192.168.1.171:58603
01/18/2023, 11:26:41.14 Streaming request from ('192.168.1.171', 58605)
Error: Can't find streamer for 35400 in dict_keys(['rp1', 'rp2', 'rp3',
'rp4', 'rp5'])
01/18/2023, 11:26:41.14 Streaming request from ('192.168.1.171', 58606)
Error: Can't find streamer for 35400 in dict_keys(['rp1', 'rp2', 'rp3',
'rp4', 'rp5'])
01/18/2023, 11:26:41.14 Streaming request from ('192.168.1.171', 58607)
Error: Can't find streamer for 35400 in dict_keys(['rp1', 'rp2', 'rp3',
'rp4', 'rp5'])
.01/18/2023, 11:26:42.206 Streaming request from ('192.168.1.171', 58609)
Error: Can't find streamer for 35400 in dict_keys(['rp1', 'rp2', 'rp3',
'rp4', 'rp5'])
01/18/2023, 11:26:42.221 Streaming request from ('192.168.1.171', 58610)
Error: Can't find streamer for 35400 in dict_keys(['rp1', 'rp2', 'rp3',
'rp4', 'rp5'])
01/18/2023, 11:26:42.221 Streaming request from ('192.168.1.171', 58611)
Error: Can't find streamer for 35400 in dict_keys(['rp1', 'rp2', 'rp3',
'rp4', 'rp5'])
01/18/2023, 11:26:47.643 Streaming request from ('192.168.1.171', 58612)
Error: Can't find streamer for 35400 in dict_keys(['rp1', 'rp2', 'rp3',
'rp4', 'rp5'])
01/18/2023, 11:26:47.643 Streaming request from ('192.168.1.171', 58614)
Error: Can't find streamer for 35400 in dict_keys(['rp1', 'rp2', 'rp3',
'rp4', 'rp5'])
...01/18/2023, 11:27:18.065 Streaming request from ('192.168.1.171',
58617)
Error: Can't find streamer for 35400 in dict_keys(['rp1', 'rp2', 'rp3',
'rp4', 'rp5'])
01/18/2023, 11:27:18.065 Streaming request from ('192.168.1.171', 58619)
Error: Can't find streamer for 35400 in dict_keys(['rp1', 'rp2', 'rp3',
'rp4', 'rp5'])
....01/18/2023, 11:27:53.97 " RP1-FamRm" 1 Clients.192.168.1.112:52781
..01/18/2023, 11:28:18.143 Streaming request from ('192.168.1.171', 58622)
Error: Can't find streamer for 35400 in dict_keys(['rp1', 'rp2', 'rp3',
'rp4', 'rp5'])
.......01/18/2023, 11:29:26.034 " RP1-FamRm" 1 Clients.192.168.1.112:52781
.........01/18/2023, 11:30:58.018 " RP1-FamRm" 1
Clients.192.168.1.112:52781
.........01/18/2023, 11:32:30.84 " RP1-FamRm" 1 Clients.192.168.1.112:52781
....01/18/2023, 11:33:18.581 Streaming request from ('192.168.1.171',
58644)
Error: Can't find streamer for 35400 in dict_keys(['rp1', 'rp2', 'rp3',
'rp4', 'rp5'])
.....01/18/2023, 11:34:03.387 " RP1-FamRm" 1 Clients.192.168.1.112:52781
.........01/18/2023, 11:35:35.893 " RP1-FamRm" 1
Clients.192.168.1.112:52781
.........01/18/2023, 11:37:09.628 " RP1-FamRm" 1
Clients.192.168.1.112:52781
.........01/18/2023, 11:38:41.784 " RP1-FamRm" 1
Clients.192.168.1.112:52781
.......
…On Wed, Jan 18, 2023 at 5:22 AM GerryDazoo ***@***.***> wrote:
Keycodes = [] means you're using an unconfigured VideoSource. The slingbox
does not know the info it needs to send out the IR data to the STB. You
need to configure the VideoSource you're using.
PS, Please next time post ALL the server output and and copy of your
config file and please post the text and not a screen shot
PPS. Comment out your FinderID in your config,ini. You obviously have not
configured your router properly to allow remote access.
—
Reply to this email directly, view it on GitHub
<#459 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/A47GZKNZ427ZKMW5JK7YQGLWS674TANCNFSM6AAAAAATK47L2E>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
That all looks good. Where is that 35400 coming from? The remote URL should be http://serverip:35400/Remote/rp1 or rp2 ... |
Beta Was this translation helpful? Give feedback.
-
|
Weird. That is the URL I have been using, but when I surf to that URL the
browser starts downloading a file (stream presumably) called rp1 or
rp2...did not have this when I ran it as an individual instance (ie
separate coninstance and config for each sb).
The 35400 is just a random port number I picked.
…On Wed, Jan 18, 2023 at 12:46 PM GerryDazoo ***@***.***> wrote:
That all looks good. Where is that 35400 coming from?
The URL to give to your media player should be http://serverip:35400/r/rp1
or rp2 or rp3 .....
Where r = URLbase and rp1.. are the Slingbox ids.
—
Reply to this email directly, view it on GitHub
<#459 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/A47GZKJTFZBEDU7U76AOGADWTAT5TANCNFSM6AAAAAATK47L2E>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
What exactly are you putting into your browser. http://serverip:35400/Remote/rp1 |
Beta Was this translation helpful? Give feedback.
-
|
Also getting this now while running the consolidated (single) config.ini file - something I did not see in individual instances...still think has something to do with the Remote configuration...I think a few of the "streaming requests" listed had to do with my efforts to connect to the Remote since when I surfed there it started download an object by the name of the sb name definition (rp1) in the config.ini. ...............01/18/2023, 14:17:45.315 " RP5 - MBR" 1 Clients.192.168.1.112:52928 |
Beta Was this translation helpful? Give feedback.
-
|
What exactly are you putting into your browser. http://serverip:35400/Remote/rp1 Someone else reported something similar but he went on vacation and we never got to the bottom of it. We were going to run the python version so we could add in some debug to see what's going on. Or try this.. |
Beta Was this translation helpful? Give feedback.
-
|
I have tried both http://serverip:35400/r/rp1 and
http://serverip:35400/Remote/rp1
In both cases the browser commences a download of an object "rp1" as it
opens the file dialog to save the file.....
So what appears to be happening is when you surf to the Remote page it
causes Slinger to startup another stream rather than invoking the Remote
routine ?? as this is what I see on the console when I tried to open the
remote for rp2
Slinginfo "350/500/M1/M2" 12 30 192.168.1.100 5221 3072 10
" RP2 - Office" Starting Stream for 192.168.1.171:59898
Connecting... ('192.168.1.100', 5221) Control
" RP2 - Office" Using encrypted password:
E1:446b004ee6891b94xxxxxxfdc339a156806898521dfb73b6e3686b093a1b507885
" RP2 - Office" Selecting Video Source 1
Keycodes= [1, 4, 5, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 24, 25,
26, 27, 28, 29, 30, 31, 33, 35, 36, 38, 39, 40, 41, 42, 45, 46, 53, 62, 63,
72, 73, 74, 75, 76, 77, 78, 79, 80, 81]
VideoParameters: Resolution= 12 FrameRate= 30 VideoBandwidth= 2000
VideoSmoothness= 63 IframeRate= 5 AudioBitRate= 64
Connecting... ('192.168.1.100', 5221) Stream
" RP2 - Office" Stream started at 01/18/2023, 14:52:40.784 744 0
01/18/2023, 14:52:40.784 " RP2 - Office" Sending Start Channel 600
sending key 14 1
sending key 18 1
.sending key 18 1
..01/18/2023, 14:52:51.784 " RP2 - Office" Stream Terminated for
192.168.1.171:59898
" RP2 - Office" Shutting down connections
" RP2 - Office" Logging Out
Streamer: " RP2 - Office" Waiting for first stream, flushing any IR
requests that arrive while not connected to slingbox
......01/18/2023, 14:53:16.01 " RP5 - MBR" 1 Clients.192.168.1.171:59177
.01/18/2023, 14:53:24.362 " RP3 - Back" 1 Clients.192.168.1.171:59239
.............
…On Wed, Jan 18, 2023 at 2:45 PM GerryDazoo ***@***.***> wrote:
What exactly are you putting into your browser.
http://serverip:35400/Remote/rp1
—
Reply to this email directly, view it on GitHub
<#459 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/A47GZKNWHVKYC6WDOK64K3LWTBB6NANCNFSM6AAAAAATK47L2E>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
did you try the new exe i posted? |
Beta Was this translation helpful? Give feedback.
-
|
Currently running 3.08f - is there a later one? Do not see anything later
on Github.
I went back to trying to run just one instance, and when I try to connect
to the remote now on one that was working, I am getting this message on the
console...this started happening (seemingly) after my exploits messing with
the unified config.ini setup. I tried rebooting streaming computer as well
and still getting that error message.
" RP3 - Back " Stream started at 01/18/2023, 17:00:47.503 744 0
01/18/2023, 17:00:52.502 Streaming request from ('192.168.1.171', 60371)
Error: Can't find streamer for Remote in dict_keys(['35403'])
…On Wed, Jan 18, 2023 at 3:53 PM GerryDazoo ***@***.***> wrote:
did you try the new exe i posted?
—
Reply to this email directly, view it on GitHub
<#459 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/A47GZKO4WOELPSYOOOQXG23WTBJ5BANCNFSM6AAAAAATK47L2E>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
the new exe was posted in this thread slingbox_server.zip. PS> You neglected to post your config,ini and ALL server output and while you're at it, the URL you used to load the remote. |
Beta Was this translation helpful? Give feedback.
-
|
OK did that and now getting this error when I try to startup a stream with
the first sb - this new version has the fix that supports the E1 passwords?
Version : 4.0 Running on Windows-10-10.0.22621-SP0 pid= 4988
C:\Slingbox\slingbox_server.exe
Using config file config.ini
Connection Manager Running on port 35400 with 10 max streams using URL r.
BOXES [('sb1', 'rp1')]
BOX URL /r/rp1
Building page for rp1
Reading Custom Remote definition from rp1_remote.txt
Streamer Running: 10 config.ini rp1 rp1 35400 8388608
starting up on port 35400 8388608
" RP1-FamRm" Checking for slingbox at ('192.168.1.47', 5205) 0
" RP1-FamRm" ('192.168.1.47', 5205) OK
" RP1-FamRm" Using slingbox at ('192.168.1.47', 5205)
Streamer: " RP1-FamRm" Waiting for first stream, flushing any IR requests
that arrive while not connected to slingbox
* Serving Flask app 'slingbox_server'
* Debug mode: off
Broadcast Responder Running
Server IP address is 192.168.1.116
01/18/2023, 17:31:12.175 Streaming request from ('192.168.1.171', 60521)
/r/rp1
STREAM=192.168.1.171:60521:0
" RP1-FamRm" Using encrypted password:
E1:e25c62680d7636b0e50b5b874680c626fd950914a914ac3da7104e0bd8166b06
Bad E1: Password cannot decrypt. Missing/bad characters?
…On Wed, Jan 18, 2023 at 5:19 PM GerryDazoo ***@***.***> wrote:
the new exe was posted in this thread slingbox_server.zip.
THe server keeps no state info. You can swap ini files all day long.
Whatever is happening it's not because of anything you did in the unified
config. Again where did 35403 come from? your server pot was 35400.
You should go back to the unified config. To make it a littler easier to
debug just comment out a pile of the SB.s
[SLINGBOXES]
sb1=rp1
;sb2=rp2
;sb3=rp3
;sb4=rp4
;sb5=rp5
—
Reply to this email directly, view it on GitHub
<#459 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/A47GZKNZUCWG3WGQIWNG6MTWTBT5PANCNFSM6AAAAAATK47L2E>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
Yes it does. Let me investigate. Can you confirm it works with 3,08f? |
Beta Was this translation helpful? Give feedback.
-
|
Yup - just did exactly that - ran 3.08f and that connects using the E1 just
fine. Ver 4.0 returns an error with the sb pwd
01/18/2023, 19:21:57.979 Streaming request from ('192.168.1.171', 64590)
/r/rp1
STREAM=192.168.1.171:64590:0
" RP1-FamRm" Using encrypted password:
E1:e25c62680d7636b0e50b5b874680c626fd950914a914ac3da7104e0bd8166b06
Bad E1: Password cannot decrypt. Missing/bad characters?
…On Wed, Jan 18, 2023 at 7:20 PM GerryDazoo ***@***.***> wrote:
Yes it does. Let me investigate. Can you confirm it works with 3,08f?
—
Reply to this email directly, view it on GitHub
<#459 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/A47GZKICOOK4LQ6OBL35SSTWTCCDLANCNFSM6AAAAAATK47L2E>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
Thanks for finding that bug, This should work better. |
Beta Was this translation helpful? Give feedback.
-
|
and just to clarify - tersted 3.08f and 4.0 f using the same config.ini and
same sb pwd.
…On Wed, Jan 18, 2023 at 7:20 PM GerryDazoo ***@***.***> wrote:
Yes it does. Let me investigate. Can you confirm it works with 3,08f?
—
Reply to this email directly, view it on GitHub
<#459 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/A47GZKICOOK4LQ6OBL35SSTWTCCDLANCNFSM6AAAAAATK47L2E>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
This is a bug in the new exe I sent, I'll fix it soon. |
Beta Was this translation helpful? Give feedback.
-
|
Ok, thanks.
…On Thu, Jan 19, 2023 at 4:48 AM GerryDazoo ***@***.***> wrote:
This is a bug in the new exe I sent, I'll fix it soon.
—
Reply to this email directly, view it on GitHub
<#459 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/A47GZKJOHYUBCTIAF6OSS5TWTEEXNANCNFSM6AAAAAATK47L2E>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
Installed SBP 5.0.0.83 but says to Reconfigure I have to reset the box -
um, will that turn the SB into a brick?
…On Thu, Jan 19, 2023 at 9:54 AM GerryDazoo ***@***.***> wrote:
http://serverip:portnum/Remote/sbname is correct.
You need to use Sling Player Desktop 5.0.0.83 to reconfigure the Video
source.
—
Reply to this email directly, view it on GitHub
<#459 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/A47GZKPNXLVFRWPSQFFIH3TWTFIS5ANCNFSM6AAAAAATK47L2E>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
DO NOT do Factory reset. A simple power cycle might be all you need, |
Beta Was this translation helpful? Give feedback.
-
|
ok good to know - and exactly why I asked before proceeding. Thanks for
heads up!
…On Thu, Jan 19, 2023 at 10:33 AM GerryDazoo ***@***.***> wrote:
DO NOT do Factory reset. A simple power cycle might be all you need,
—
Reply to this email directly, view it on GitHub
<#459 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/A47GZKL5QB4IVE267YDTZDLWTFNGJANCNFSM6AAAAAATK47L2E>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
Tried cycling power but when I click the RECONFIGURE button associated with
the desired SB350 in SlingPlayer Desktop, it just spits back an Error page
advising to do a hard reset - Error code G-501. I presume there is some
other hack one needs to do? I searched the Discussion list and did not see
anything specific on how to do this.
…On Thu, Jan 19, 2023 at 10:33 AM GerryDazoo ***@***.***> wrote:
DO NOT do Factory reset. A simple power cycle might be all you need,
—
Reply to this email directly, view it on GitHub
<#459 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/A47GZKL5QB4IVE267YDTZDLWTFNGJANCNFSM6AAAAAATK47L2E>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
If you do a factory reset, I (we) don't know what will happen when a new password is assigned to the box.
|
Beta Was this translation helpful? Give feedback.
-
|
LOL - I do not plan to keep all working here. Have some friends and
neighbors who have expressed an interest in repeating their cable svc to a
remote location, or to multiple TVs within their home using a SB.
…On Thu, Jan 19, 2023 at 10:37 AM GerryDazoo ***@***.***> wrote:
I'm interested in what your use case is for 5 Slingboxes on your LAN.
—
Reply to this email directly, view it on GitHub
<#459 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/A47GZKJLA6MM24OADKFIMATWTFNUFANCNFSM6AAAAAATK47L2E>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
I have Shark here I can possibly setup to capture what is going on from a
test SB350 or M1 here when we reset it (unless someone has already done
this). I may have a SB350 and/or M1 here for which I have no admin pwds,
that I might be able to use as a guinea pig to see what the reset behavior
is. Not sure if that will be helpful.
…On Thu, Jan 19, 2023 at 11:00 AM GerryDazoo ***@***.***> wrote:
If you do a factory reset, I (we) don't know what will happen when a new
password is assigned to the box.
I *think* there are three possibilities.
1. The new password is assigned and Mr. Sling updates the password on
your account.
2. The new password is not applied if MR. Sling fails to update. I
think this is the default behavior because Remote SlingPlayers needed the
new password from you slingbox directory to operate
3. The Slingbox thinks it's updated MR. Sling but it didn't really
work because some back office stuff isn't working anymore. This I think is
the worst case because I'm not sure if it would be possible to recover the
new password. Maybe killing SPD after doing the VideoSource config and
before it completes, might leave the default password "admin" in place.
I haven't been brave enough to do this on one of my test boxes because
I need them for development.
—
Reply to this email directly, view it on GitHub
<#459 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/A47GZKKNKQ2EUUZRLG6STHLWTFQKDANCNFSM6AAAAAATK47L2E>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
The only capture I have is from a pre-N9 factory reset. So the 350 and M1 are basically not usable now because you don't have the admin passwords. In that case, a factory reset will be mandatory to get them going. You can give it a go and see what happens. You certainly can't make it any worse :-). We can grab a packet capture if needed if/when it doesn't work. |
Beta Was this translation helpful? Give feedback.
-
|
Yup - that's why I figured it may be worth a try since I do not have admin
pwd for those two units. Not much to lose in trying it with those. Anything
in particular (beyond IP/MAC addr) I should be filtering on with the
capture?
…On Thu, Jan 19, 2023 at 2:34 PM GerryDazoo ***@***.***> wrote:
The only capture I have is from a pre-N9 factory reset. So the 350 and M1
are basically not usable now because you don't have the admin passwords. In
that case, a factory reset will be mandatory to get them going. You can
give it a go and see what happens. You certainly can't make it any worse
:-). We can grab a packet capture if needed if/when it doesn't work.
—
Reply to this email directly, view it on GitHub
<#459 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/A47GZKLW5J3XMUIGBM4EXRLWTGJLFANCNFSM6AAAAAATK47L2E>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
Don't worry about the capture for now. You'll need a special setup so you can capture all the packets from SPD and the slingbox at the same time. |
Beta Was this translation helpful? Give feedback.
-
|
So I've tried to reset the M1 SB I got off eBay that came with no admin
pwd/original user credentials -
I did a factory reset on it and it allowed me to run through the initial
setup, it updated the firmware in the SB. But, the last part after you
select the videosource and remote setup is where it says "Configuring" on
the screen and that is where I think it fails - that is where Slingplayer
Desktop is likely trying to upload the details on this "new" slingbox into
my account, but the Sling server is likely not taking new registrations.
Therein lies the problem I suppose. When I did a subsequent query with
Postman to get details of slingboxes on my account, only the original 3 I
have are coming back in the response, not the "new" M1 I just configured
after resetting it. Eventually after it tries several times and fails with
its registration, you get an Error Msg saying "Your Slingbox has been
disconnected because of an internal error or poor internet connection.
Click on Reconnect to try again...." When it returns to the SB Directory
that one shows in the list but needs to be setup.
At some point during this setup routine, the SB MUST send that admin pwd
string across the wire, but, it likely is not decipherable.
…On Thu, Jan 19, 2023 at 2:49 PM GerryDazoo ***@***.***> wrote:
Don't worry about the capture for now. You'll need a special setup so you
can capture all the packets from SPD and the slingbox at the same time.
—
Reply to this email directly, view it on GitHub
<#459 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/A47GZKNIZJUELXPNSS7EMEDWTGLF5ANCNFSM6AAAAAATK47L2E>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
Yes it does as I mentioned in the 3 things that might happen. The password update goes over an HTTPS connection so yes you can't see it in the clear. |
Beta Was this translation helpful? Give feedback.
-
|
Hey sorry, after that reset of the M1, just tried adding it into the config
with the admin passwd of admin - works perfectly!
…On Thu, Jan 19, 2023 at 2:49 PM GerryDazoo ***@***.***> wrote:
Don't worry about the capture for now. You'll need a special setup so you
can capture all the packets from SPD and the slingbox at the same time.
—
Reply to this email directly, view it on GitHub
<#459 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/A47GZKNIZJUELXPNSS7EMEDWTGLF5ANCNFSM6AAAAAATK47L2E>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
That is very encouraging. And the remote works OK? |
Beta Was this translation helpful? Give feedback.
-
|
So - results of my testing with doing a factory reset on a SB M1 model and
SB350 model using Slingplayer Desktop 5.0.0.83. These were two units I got
from eBay for which I did not have the account credentials to extract the
admin passwords from Sling, so figuring they'd be useless and destined for
the trash, I decided to try factory resetting them anyway and see what
happens. Note that results might be different elsewhere given this test
involves a sample size of ONE for each of the two models I tested. I am
sure others will give it a try.
*SB M1*
I did a hard reset (holding in the reset button with a paperclip).It
allowed me to run through the entire setup, including selecting the STB
type, set video source etc. The last step where it presumably registers
this configuration at Sling fails since either the server is off the air,
or, they have their database configured to refuse any new inserts. The good
news is after doing this I was able to connect it to Slinger using the
admin password of "admin" and so far, it works perfectly including all the
Remote functions.
*SB350*
I did the hardware reset (holding in the reset button on the back for 10+
secs). Slingplayer Desktop recognized it in the list of locally connected
Slingboxes, and like the M1, showed the SETUP button. However, unlike the
M1, when I clicked SETUP it displayed "Initializing" and just sat there
spinning and spinning. So it never got to the stage where you walk through
the configuration. Convinced I had bricked the thing, I thought I would try
it on Slinger anyway. To my surprise, it connected to Slinger (using the
"admin" password), and it worked fine, reading the video coming off the
composite video (videosource=1). Of course the Remote does not work since I
never got to tell it what STB to use. It does connect to Slinger fine but
the Remote obviously does not work.
…On Thu, Jan 19, 2023 at 2:49 PM GerryDazoo ***@***.***> wrote:
Don't worry about the capture for now. You'll need a special setup so you
can capture all the packets from SPD and the slingbox at the same time.
—
Reply to this email directly, view it on GitHub
<#459 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/A47GZKNIZJUELXPNSS7EMEDWTGLF5ANCNFSM6AAAAAATK47L2E>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
With the M1 it does - not with the SB350 I reset.
…On Fri, Jan 20, 2023 at 9:34 AM GerryDazoo ***@***.***> wrote:
That is very encouraging. And the remote works OK?
—
Reply to this email directly, view it on GitHub
<#459 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/A47GZKKYKLJU6ZPFC67AKMLWTKPANANCNFSM6AAAAAATK47L2E>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
do you have all internet access blocked for the 350 or just port 5678? I think you mentioned parental controls, if it's like my router that block all traffic based on source MAC address. The box might need internet access to download required information. |
Beta Was this translation helpful? Give feedback.
-
|
I have three 350's and two ProHD's. The ProHD's and one 350 that I had before N9 all work fine including the HTML remote. I bought the other two 350's from eBay after N9 and one had the email account and password and the other did not. This is what I’ve found with my testing: I’m using SPD 5.0.0.83. I have port 5678 blocked for my 5 reserved IP’s for the SB’s (192.168.1.250-192.168.1.254) 350 with email / password: Initially, I could log onto the account and it showed the 350 in the directory. When I selected reconfigure, I got the “Initializing” screen that never goes away. After that, when I start SPD, I get a “Loading” screen, then a “Searching for Slingbox devices” screen for about 3-5 seconds, and then it goes directly into “initializing” screen without showing the directory. Video and audio work fine with Slinger and I can control it remotely using the Broadlink RM-4 Mini IR blaster. 350 without email / password: I did a hard reset and tried the approach of creating a new sling account that I saw in one of the discussions. The new “My Slingbox” with the password of “admin” showed in the directory with the setup button which I selected. I’m pretty sure that it went to the “initializing” screen and then hung there. After that, I tried Slinger and the video and audio worked fine. I can control it remotely using the Broadlink RM-4 Mini IR blaster. 350 in my account before N9. I am unable to use SPD to reconfigure the 350. It just goes into the “initializing” screen. I use the DirecTV HTML remote with this one. |
Beta Was this translation helpful? Give feedback.
-
|
Just wondering how long you waited at the initializing screen before giving up. Some of the network timeouts are quite long and there may be more than one. Just for fun can you let it spin overnight? |
Beta Was this translation helpful? Give feedback.
-
|
I'll leave it on tonight but I have let it go for at least 4 hours and it kept spinning. When I run SPD, I can see with TCPView that SPD opens about 15-20 local and remote ports that show some packet activity but all but 5 local ports close after about 3-5 minutes. After that, the 5 ports show no activity and remain open until SPD is aborted. |
Beta Was this translation helpful? Give feedback.
-
|
It did spin overnight. I'm not sure what to try next and am ok with using the Broadlink RM-4 Mini with 2 of the 350's. The single display interface with the HTML remote is a little better, but the Broadlink interface isn't too bad. Thanks again Gerry for saving our SB's. |
Beta Was this translation helpful? Give feedback.
-
|
OK will do - I think I have let it run for a few hours, but I can leave it
running longer. As far as the router/firewall configuration, is there a
specific port I need to open in order for it to initialize properly?
…On Fri, Jan 20, 2023 at 8:51 PM GerryDazoo ***@***.***> wrote:
Just wondering how long you waited at the initializing screen before
giving up. Some of the network timeouts are quite long and there may be
more than one. Just for fun can you let it spin overnight?
—
Reply to this email directly, view it on GitHub
<#459 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/A47GZKPNZFPT7ZONDCFJYF3WTM6IXANCNFSM6AAAAAATK47L2E>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
Actually I think it did run overnight last night - just looked at it here
and it is still running from yesterday.
…On Fri, Jan 20, 2023 at 10:04 PM tmcafee52 ***@***.***> wrote:
I'll leave it on tonight but I have let it go for at least 4 hours and it
kept spinning. When I run SPD, I can see with TCPView that SPD opens about
15-20 local and remote ports that show some packet activity but all but 5
local ports close after about 3-5 minutes. After that, the 5 ports show no
activity and remain open until SPD is aborted.
—
Reply to this email directly, view it on GitHub
<#459 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/A47GZKNJDQ24AWOG2LCTOQTWTNG4XANCNFSM6AAAAAATK47L2E>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
Similar results here as well.
Remind me again why we block 5678? I had not done that and so far have not
seen any issues, but I just added network service filters on my firewall to
block that port.
…On Fri, Jan 20, 2023 at 8:23 PM tmcafee52 ***@***.***> wrote:
I have three 350's and two ProHD's. The ProHD's and one 350 that I had
before N9 all work fine including the HTML remote. I bought the other two
350's from eBay after N9 and one had the email account and password and the
other did not.
This is what I’ve found with my testing:
I’m using SPD 5.0.0.83.
I have port 5678 blocked for my 5 reserved IP’s for the SB’s
(192.168.1.250-192.168.1.254)
350 with email / password: Initially, I could log onto the account and it
showed the 350 in the directory. When I selected reconfigure, I got the
“Initializing” screen that never goes away. After that, when I start SPD, I
get a “Loading” screen, then a “Searching for Slingbox devices” screen for
about 3-5 seconds, and then it goes directly into “initializing” screen
without showing the directory. Video and audio work fine with Slinger and I
can control it remotely using the Broadlink RM-4 Mini IR blaster.
350 without email / password: I did a hard reset and tried the approach of
creating a new sling account that I saw in one of the discussions. The new
“My Slingbox” with the password of “admin” showed in the directory with the
setup button which I selected. I’m pretty sure that it went to the
“initializing” screen and then hung there. After that, I tried Slinger and
the video and audio worked fine. I can control it remotely using the
Broadlink RM-4 Mini IR blaster.
350 in my account before N9. I am unable to use SPD to reconfigure the
350. It just goes into the “initializing” screen. I use the DirecTV HTML
remote with this one.
—
Reply to this email directly, view it on GitHub
<#459 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/A47GZKKAV4C3L3UIW2N3YGDWTM3A5ANCNFSM6AAAAAATK47L2E>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
Port 5678 was used by Mr. Sling to brick the Solo, Pro and ProHDs. The ProHD is recoverable. |
Beta Was this translation helpful? Give feedback.
-
|
Ok, thanks.
…On Sat, Jan 21, 2023, 9:21 AM GerryDazoo ***@***.***> wrote:
Port 5678 was used by Mr. Sling to brick the Solo, Pro and ProHDs. The
ProHD is recoverable.
So we're recommending blocking it just in case. But so far it looks like
Mr. Sling has left the 500/350/M1 unscathed.
—
Reply to this email directly, view it on GitHub
<#459 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/A47GZKNA3KVC6SOVGPA73ODWTPWFPANCNFSM6AAAAAATK47L2E>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
Just got this working today with my 3 Slingbox units under Windows 11. Awesome job on building this!! I now have a neighbor that wants me to set one up for him, but he did not have his own Slingbox. He bought a Slingbox on eBay. Of course it does not come with the associated email address. Is there any way to get the admin password without having the associated email of the Slingbox unit?
Beta Was this translation helpful? Give feedback.
All reactions