uca.h

/*****************************************************************************
 *                                CACTI 7.0
 *                      SOFTWARE LICENSE AGREEMENT
 *            Copyright 2015 Hewlett-Packard Development Company, L.P.
 *                          All Rights Reserved
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are
 * met: redistributions of source code must retain the above copyright
 * notice, this list of conditions and the following disclaimer;
 * redistributions in binary form must reproduce the above copyright
 * notice, this list of conditions and the following disclaimer in the
 * documentation and/or other materials provided with the distribution;
 * neither the name of the copyright holders nor the names of its
 * contributors may be used to endorse or promote products derived from
 * this software without specific prior written permission.

 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.”
 *
 ***************************************************************************/



#ifndef __UCA_H__
#define __UCA_H__

#include "area.h"
#include "bank.h"
#include "component.h"
#include "parameter.h"
#include "htree2.h"
#include "memorybus.h"
#include "basic_circuit.h"
#include "cacti_interface.h"



class UCA : public Component
{
  public:
    UCA(const DynamicParameter & dyn_p);
    ~UCA();
    double compute_delays(double inrisetime);  // returns outrisetime
    void   compute_power_energy();

    DynamicParameter dp;
    Bank   bank;

    Htree2   * htree_in_add;
    Htree2   * htree_in_data;
    Htree2   * htree_out_data;
    Htree2   * htree_in_search;
    Htree2   * htree_out_search;

    Memorybus * membus_RAS;
    Memorybus * membus_CAS;
    Memorybus * membus_data;

    powerDef power_routing_to_bank;

    uint32_t nbanks;

    int   num_addr_b_bank;
    int   num_di_b_bank;
    int   num_do_b_bank;
    int   num_si_b_bank;
    int   num_so_b_bank;
    int   RWP, ERP, EWP,SCHP;
    double area_all_dataramcells;
    double total_area_per_die;

    double dyn_read_energy_from_closed_page;
    double dyn_read_energy_from_open_page;
    double dyn_read_energy_remaining_words_in_burst;

    double refresh_power;  // only for DRAM
    double activate_energy;
    double read_energy;
    double write_energy;
    double precharge_energy;
    double leak_power_subbank_closed_page;
    double leak_power_subbank_open_page;
    double leak_power_request_and_reply_networks;

    double delay_array_to_sa_mux_lev_1_decoder;
    double delay_array_to_sa_mux_lev_2_decoder;
    double delay_before_subarray_output_driver;
    double delay_from_subarray_out_drv_to_out;
    double access_time;
    double precharge_delay;
    double multisubbank_interleave_cycle_time;

    double t_RAS, t_CAS, t_RCD, t_RC, t_RP, t_RRD;
    double activate_power, read_power, write_power;

	double delay_TSV_tot, area_TSV_tot, dyn_pow_TSV_tot, dyn_pow_TSV_per_access;
	unsigned int num_TSV_tot;
	unsigned int comm_bits, row_add_bits, col_add_bits, data_bits;
	double area_lwl_drv, area_row_predec_dec, area_col_predec_dec,
	area_subarray, area_bus, area_address_bus, area_data_bus, area_data_drv, area_IOSA, area_sense_amp,
	area_per_bank;

};

#endif