Scripts: Custom Commands

IGEL OS

Disable Wifi (wlan0) when ethernat (eth0) is pluged

LX V10

system -> firmware customization -> custom commands -> base-> initialization:

echo '#!/bin/bash' >> /etc/NetworkManager/dispatcher.d/99-wlan
echo 'if [ "$1" = "eth0" ]; then' >> /etc/NetworkManager/dispatcher.d/99-wlan
echo 'case "$2" in' >> /etc/NetworkManager/dispatcher.d/99-wlan
echo 'up)' >> /etc/NetworkManager/dispatcher.d/99-wlan
echo 'nmcli radio wifi off' >> /etc/NetworkManager/dispatcher.d/99-wlan
echo ';;' >> /etc/NetworkManager/dispatcher.d/99-wlan
echo 'down)' >> /etc/NetworkManager/dispatcher.d/99-wlan
echo 'nmcli radio wifi on' >> /etc/NetworkManager/dispatcher.d/99-wlan
echo ';;' >> /etc/NetworkManager/dispatcher.d/99-wlan
echo 'esac' >> /etc/NetworkManager/dispatcher.d/99-wlan
echo 'fi' >> /etc/NetworkManager/dispatcher.d/99-wlan
chmod +x /etc/NetworkManager/dispatcher.d/99-wlan

LX V5

system -> firmware customization -> custom commands -> base-> initialization:

echo '#!/bin/bash' >> /etc/NetworkManager/dispatcher.d/99-wlan
echo 'if [ "$1" = "eth0" ]; then' >> /etc/NetworkManager/dispatcher.d/99-wlan
echo 'case "$2" in' >> /etc/NetworkManager/dispatcher.d/99-wlan
echo 'up)' >> /etc/NetworkManager/dispatcher.d/99-wlan
echo 'nmcli nm wifi off' >> /etc/NetworkManager/dispatcher.d/99-wlan
echo ';;' >> /etc/NetworkManager/dispatcher.d/99-wlan
echo 'down)' >> /etc/NetworkManager/dispatcher.d/99-wlan
echo 'nmcli nm wifi on' >> /etc/NetworkManager/dispatcher.d/99-wlan
echo ';;' >> /etc/NetworkManager/dispatcher.d/99-wlan
echo 'esac' >> /etc/NetworkManager/dispatcher.d/99-wlan
echo 'fi' >> /etc/NetworkManager/dispatcher.d/99-wlan
chmod +x /etc/NetworkManager/dispatcher.d/99-wlan

let network sleep for 10 seconds during boot

system -> firmware customization -> custom commands -> network -> network initialization:

sleep 10

This will set an IGEL Registry Parameter and reload the Config

#SET Variables
CONFIG="/config/bin/icaconfig"
#Command for Set the param
SET=setparam
#Command for Config Reload
SETUP=killwait_postsetupd
#What param should be filled
CONFIG1=ica.pnlogin.desktop_folder_farm
#Param Value
VAL1=true
#Starting script
#add everthing together
$SET $CONFIG1 $VAL1
$SETUP
$CONFIG

Use "E-Mail" as CommonName/SubjectAltName but fill it with DNS Name

#Put this line to custom commands, DNS Ready
sed -i 's/ SANAME=`get network.scepclient.cert${INST}.subjectaltname` /SANAME="`hostname`@domain.local"/' 
/usr/sbin/scep_mkrequest

Default Audio Output to HDMI or DP:

LX V10

put under Firmware Customization -> Custom Commands -> Desktop -> Final Desktop Command, following commands

XDG_RUNTIME_DIR=/run/user/777 su  -c "pacmd set-card-profile 0 output:hdmi-stereo" user;
XDG_RUNTIME_DIR=/run/user/777 su  -c "pacmd set-card-profile 1 off" user;
amixer -D pulse sset Master 100%

LX V5

This line is for UD3-LX 50. It greps the available sink for HDMI sound and sets the default sink to it.

su user -c 'pacmd set-default-sink "$(pacmd list-sinks | grep hdmi | grep name: | grep -o -P "(?<=<).*(?=>)")"'

This line is for UD6-LX 51. It sets the card profile to HDMI because there is no additinal sink for it.

su user -c "pacmd set-card-profile 0 output:hdmi-stereo-extra1"

This line is for UD5-LX 40 which has also a differen sound profile for HDMI.

su user -c "pacmd set-card-profile 0 output:hdmi-stereo"