- Indicated broken tests in
"2w_dy_lead"
and"3-bus SOCConicUBF opf_bf"
by using@test_skip
- Added transformation
reduce_line_series!
which will reduce lines that consist of only buses with no additional connections to a single line. - Added function
solve_mn_mc_opf_oltc
for multi-networks - Fixed bug in
DssLine
parser wherec1
was being set toc0
- Fixed native pf unit tests, which assume no virtual branches from switches (applied
make_lossless!
before test) - Added
g_fr
,g_to
,b_fr
,b_to
to switches indss2eng
andeng2math
- Fixed bug in parsing of dss lines where
switch=y
actually impliesx1=1
,x0=1
,r1=1
,r0=1
,c1=1.1
,c0=1
,length=0.001
, andunits=none
- Added transformation to remove center-tap (distribution) transformers and replace them with equivalenced lines
- Fixed bug where filename vector was not being passed through from raw dss to eng data structs
- Fixed bug where controls for transformer banks with phases not starting with
1
would throw a parsing error due to the wrong conductor identifierc
- Fixed bug where
.
chars in dss object names would cause part of the name of the object to get dropped - Fixed bug where
var(pm, :p)
andvar(pm, :q)
in theIVRUPowerModel
formulation were being overwritten by transformer and switch variable functions - Rewrite of dss parser for increased robustness and to avoid edge cases. Instead of parsing raw dss into Dicts, we use vectors of string pairs to preserve the order of commands. This more closely replicates proper dss parsing (breaking)
- Rewrite of
dss2eng
transformation function to support new dss data model (breaking) - Added new
struct
s andabstract type
s for data models to support dss parser rewrite, including interfaces so that these new objects can be interacted with similarly to Dicts, to aid in transition to new dss data model
- Fixed failing unit test
capcontrol_fotr
onJulia 1 - macOS-latest - x64
- Add native power flow solver by using
compute_mc_pf(data_math)
- Fixed bug in
build_mc_pf
whereconstraint_mc_storage_power_setpoint_real
was being applied to all storage objects, and not just ones on PV buses - Fixed implementation of polynomial nonlinear (nl) costs above quadratic in
objective.jl
- Fixed bug in
_map_eng2math_voltage_source!
wherepg
andqg
were getting set to zero instead trying toget
them from theeng_obj
first - Fixed bug in LPUBFDiagModel
constraint_mc_load_power
where the format of the constraint would lead to infeasibilities - Fixed bug in dss parser that did not recognize
//
as token for inline comments
- Added loads/generator models (240V devices) connected between two secondary terminals of center-tapped transformers for SOC formulation
- Fixed bug with SOC and LinDist3Flow formulations where diagonal entries of matrix variables were defined with type
Vector{JuMP.VariableRef}
(no information about connections) instead ofJuMP.Containers.DenseAxisArray
, leading to errors when single- or two-phase nodes were present in network - Fixed bug in
_calc_bus_vm_ll_bounds
where default minvdmin_eps
was not being used, leading to invalidInf
bounds
- Fixed voltage_source impedance matrices, which were populating impedances outside of
1:nphases
with zeros instead of the defined mutual and self impedances #422 #376 - Added compat for SpecialFunctions
- Added support for computing line constants from WireData, LineGeometry, LineSpacing, TSData and CNData
- Added Julia library SpecialFunctions for
besselj0
implementation - Changed message that line is "being treated as superconducting" from
@info
to@debug
- Added support for WireData, LineGeometry, LineSpacing, TSData, and CNData dss objects
- Fixed bug in dss parser where when properties were assigned via
assign_property!
, theprop_order
was not updated - Updated CI workflows to used Nodejs v16 scripts
- Added UBF matrix power variables for switches #423
- Fixed bug in dss parser where properties assigned via
assign_property!
would fail if the object they applied to was not created in the same file #397 - Fixed bug in
get_defined_buses
to check if"bus"
property is aVector
instead of checking if it is aString
#416 - Fixed bug in
_map_eng2math_bus!()
regarding calculation of shunt element susceptance parameter - Added SOC transformer relaxations
- Fixed bugs in center-tap transformer modeling
- Add wye-connected CapControl for IVR and FOT (polar) formulations
- Fixed indexing issue for single-phase delta load models in linear formulations (LinDist3Flow, FOTP, FOTR, FBS)
- Added ZIP load model
- Updated documentation in
make_multiconductor!
to better indicate its unsupported nature - Added automatic detection of multinetwork data to
instantiate_mc_model
- Converted
::Float64
types in function signatures to::Real
- Fixed bug in
parse_file
in.dss
files with character UTF-8 0x09 (Tabulation) #394
- Fixed bug in
apply_voltage_bounds!
for multinetwork data - Added compat for JuMP v1
- Fixed bug in
_map_eng2math
where global keys were not being propagated in multinetwork - Fixed bug/typo in
_create_storage
wherekwhstored
was derived from:stored
instead ofSymbol("%stored")
- Fixed bug in function
_dss2eng_loadshape!()
whereqmult
data was overwritingpmult
data #386
- Fixed bug in dss parser where circuit was not being edited using the
edit
dss command - Fixed bug in eng2math functions where the voltage angle was being set incorrectly for generation assets that were set to isochronous control mode
- Fixed failing unit test "3-bus SOCConicUBF opf_bf" for Windows
- Updated minimum Julia requirement to v1.6 (LTS) #382
- Added compat for JuMP v0.23, Ipopt v1.0, SCS v1.1, PolyhedralRelaxations v0.3.3
- Dropped support for SCS 0.8 in Unit tests (0.9 no longer supports
eps
option) - Fixed bug in
remove_all_bounds!
where an||
was not enclosed in parentheses - Changed remaining instances of
Int64
toInt
for better compatibility #382 - Fixed bug in
create_solar
where kwargs were not being utilized #380 - Fixed bug in
create_storage
where datatypes were inconsistent with documentation #379 - Added check for missing
vbase
inapply_voltage_bounds!
transformation - Refactored
constraint_mc_power_balance_capc(pm::LPUBFDiagModel, ...)
to be more consistent with other versions, for easier debugging - Removed Cbc, Juniper from unit tests (not being utilized in tests)
- Removed explicit field copying from
voltage_source
math2eng solution conversion (now copies all fields) - Fixed bug in
_calc_branch_series_current_max
wherevmin_to
usedbus_fr
instead ofbus_to
#378
- Fix
variable_mc_capcontrol
keyword arguments
- Drop support for JuMP < v0.22
- Refactored functions to remove kwargs in many cases of constraints/variables
- Fixed bugs in NFAU constraints/variables
- Fixed bug where no solution would result in an error, instead of empty solution
- Fixed issue with looped edge components in ref (i.e., if f_bus==t_bus)
- Added linear relaxation of ampacity constraints (remove quadatric)
- Fixed on-off storage variable start value
- Fixed
1phase-pv
unit tests - Adjusted
sbase_default
, and added@info
if basemva from dss is the default value - Fixed storage model for powerflow validation (new test values are based directly on dss outputs)
- Added
con(pm, nw, :ohms_yt, f_idx)
to store ohms constraints - Added
constraint_mc_branch_flow
for effective zero impedance branches in Bus Injection models, includingcon(pm, nw, :branch_flow, i)
to store the constraints - Fixed broken
capcontrol
test - Fixed broken
storage
tests - Fixed
data model
unit tests - Updated to add InfrastructureModels v0.7
- Fixed wrong
kvar
instorage
dss struct - Updated default pg in solar object when parsing from dss to use pmpp and irradiance
- Fixed missing
solar
in 1-to-1 maps for eng2math - Fixed default
vad_lb
andvad_ub
increate_line
- Fixed bug in
create_voltage_source
where the voltage anglesva
were all zero - Updated storage parsing to use kva instead of kvar for qs_lb and qs_ub (storage in dss is defined to be able to handle any reactive power up to the thermal limit of the inverter)
- Fixed
make_lossless!
to adjust how switches are made lossless - Fixed voltage sqr variable start values
- Fixed p/q variable start values
- Added missing
temperature
on pvsystem - Added
configuration=WYE
to voltage sources - Fixed bug in voltage angle variable start values
- Fixed bug with case sensitive filenames by using
Glob.glob
withGlob.FilenameMatch
- Fixed bug in
constraint_mc_switch_current_limit
where voltage variables being used were wrong - Moved all
import
statements to rootPowerModelsDistribution
- Fixed bug in
_calc_transformer_current_max_frto
wheresm_ub
should have been divided byvmin
, NOTvmax
- Updates
LPUBFDiagModel
description in docs
- Fixed bug in
constraint_mc_theta_ref
where default va_ref was in wrong units - Fixed bug in call to
constraint_capacitor_on_off
wherenw
network id was not being passed - Refactored kwargs
kron_reduced
andphase_projected
to bekron_reduce
andphase_project
, respectively - Added more native support for multinetwork data structures
- Changed
"multiple references buses found"
warning to@debug
- Added multinetwork versions of data model transformation functions using
apply_pmd!
- Added
propagate_network_topology!
, a helper function to propagate the status of buses to connected components - Updated Documentation on Storage data model
- Added LPUBFDiag version of
constraint_mc_storage_thermal_limit
using PolyhedralRelaxations to relax the quadratic constraints - Fixed bug in reporting duals (typo in ampacity constraint functions) (#367)
- Changed multiconductor storage model parsing from opendss to be single values (instead of creating some multiconductor values, making assumptions about split between phases)
- Fixed
vm
,va
variable starts inACRU
andACPU
forms - Fixed boundless
LPUBFDiagModel
constraint_mc_transformer_power_yy
with controls - Fixed
ACPUPowerModel
vm
,va
variable starts - Updated
FOTPU
,FOTRU
andFBS
models for consistency with other formulations - Fixed bug in
make_lossless!
- Updated
correct_bus_types!
to be knowledgable about islands in the network data - Changed
warning
to@warn
- Added storage to
solve_mc_opf_oltc_capc
problems - Fixed bug in parsing of
null
values from JSON - Changed
cm_ub
on storage parsing tosm_ub
to be consistent with what the parsed value actually is - Fixed bug in
cm_ub
parsing on lines - Updated
constraint_mc_transformer_power_yy(pm::LPUBFDiagModel)
to be truly LP - Updated
ACRUPowerModel
voltage start value computation - Fixed bug in
dimensionalize_math
, wheresc_on
, andsd_on
were included under storage (non-dimensional values should not be scaled) - Removed
sm_ub_b
,cm_ub_b
,sm_ub_c
,cm_ub_c
from kron reduction (fields no longer exist) - Updated
make_lossless!
to make the model truly lossless, by including all line parameters - Added
adjust_transformer_limits!
to multiple transformer variable bounds - Added transformations
adjust_small_line_impedances!
,adjust_small_line_admittances!
,adjust_small_line_lengths!
, to help prune bad eng-model data - Fixed
set_time_elapsed!
multinetwork function to update"time"
and"mn_lookup"
- Added
"status"
to transformer decomposition functions - Updated
eng2math
functions to have consistent usage of"status"
from eng model - Updated
variable_mc_storage_power_mi
to have explicit kwargs - Updated
on_off
variable functions to ensure zeros are included in variable bounds - Changed
"multiple reference buses found"
warning to@info
- Added LP version of
constraint_storage_complementarity_nl
- Added PolyhedralRelaxations.jl as a dependency for relaxing quadratic and bivariate constraints
- Fixed voltage warm start in
FBSUBFModel
form - Added functions necessary for
capc
andoltc
in NFAUPowerModel - Fixed bug in
FBSUBFModel
formulation, where transformer variables were being created in their matrix form - Fixed bug in parsing of dss generator objects, which didn't take into account
pf
- Fixed
oltc
inLPUBFDiagPowerModel
, which was previously a@NLconstraint
to now use@constraint
- Fixed bug in
constraint_mc_power_balance_capc::AbstractUnbalancedACPModel
, where@smart_constraint
was failing due to missing variable - Fixed bug in
start
values for tap variables - Refactored
_calc_branch_power_max
and_calc_branch_current_max
to be more robust - Added
solve_mc_opf_oltc_capc
problem, which includes bothsolve_mc_opf_oltc
andsolve_mc_opf_capc
features - Added kwarg to
apply_voltage_bounds!
to exclude some buses - Added
adjust_line_limits!
transformation function - Added support for parsing
sm_ub
from dss to transformers (comes fromemerghkva
) - Fixed bug in
capc
problems where switches were not considered as a control element for capacitors - Fixed bug in
_create_xfmrcode
where:bus
was included in iteration - Added missing
constraint_mc_ampacity_from
andconstraint_mc_ampacity_to
constraints inopf_oltc
problems - Fixed bug in
NFAUPowerModel
formulation, wherevariable_mc_transformer_power_real
was incorrectly setting up transformer power variables - Fixed bug in
calc_voltage_bases
where if a transformer configuration was in xfmrcode, the function would error - Added data transformations
remove_line_limits!
andremove_transformer_limits!
, to remove current/power bounds on lines, linecodes, switches, and transformers - Fixed bug in
linecode
objects wherecm_ub
orsm_ub
were not being passed correctly to lines - Added capability to infer number of phases from supported dss objects
- Fixed bug in
calc_connected_components
where function signature was incorrect
- Fixed issue of missing
va
on reference buses which have been selected automatically - Fixed PVSystem fields and defaults based on latest version
- Added support for
action=normalize
on dss LoadShapes - Fixed bug in dss LoadShape where
useactual=yes
was the default, whereasuseactual=no
is the real default - Removed remaining PowerModels files / dependency from unit tests
- Changed
sbase_default
to1.0
by default, because often with default solver settings, constraints were ignored for being far too small - Changed to use emergamps from dss for
cm_ub
on lines by default (higher limit) - Fixed bug in transformer math2eng conversion where
tap
was not carried to the solution - Fixed wrong index in
constraint_mc_theta_ref
for ACRUPowerModel - Fixed Type collections; AbstractUBFModels do not necessarily have to have
w
variables, so these are explicity spelled out now - Added ampacity (current limit) constraints for branches and switches, which better reflect standard input data:
constraint_mc_ampacity_from
andconstraint_mc_ampacity_to
for branches, andconstraint_mc_switch_ampacity
for switches - Fixed bug in
bank_transformers!
function wherestatus
field was not being set correctly - Updated switch thermal constraints to store the constraints in
con(pm, nw, :mu_sm_switch, f_idx)
- Removed extraneous thermal limit constraints from power flow problem formulations
- Fixed the function signature for
variable_mc_capacitor_switch_state
andvariable_mc_capcontrol
to match conventions - Removed depreciated
run_
functions, which were replaced in withsolve_
functions in v0.10.2 - Fixed bug in
make_multinetwork!
where inferred time_elapsed was not being used - Fixed bug in
make_multinetwork!
for cases wherereplace=false
was used where we needed adeepcopy
- Added explicit neutral formulations
- Fix bug in
constraint_mc_switch_thermal_limit
where switch property name contained a typo - Fix bug in
constraint_mc_thermal_limit_from
whereInf
values inrate_a
would lead to an error - Fix bug in
correct_branch_directions!
wheref_connections
andt_connections
were not being swapped - Fix bug in
_rebase_pu_branch!
where current ratings were being non-dimensionalized with the power base instead of the current base, and added non-dimensionalization for power ratings - Fix bug in
_rebase_pu_switch!
where current ratings were being non-dimensionalized with the power base instead of the current base, and added non-dimensionalization for power ratings - The qualifier
t
was removed from the transformer solution properties, i.e.crt
->cr
, to be consistent with solution naming conventions where these qualifiers are omitted as they are contained in a transformer component dictionary, unlike the variables
- Fixed bug in eng2math conversion of buses, where the status was not correctly parsed, so
DISABLED
buses were not getting set tobus_type = 4
- Fixed bug in
apply_kron_reduction!
where not all transformers were getting kron reduced - Fixed typos in documentation
- Fixed bug in LPUBFDiagModel transformer variables
- Removed phase projection of only wye-connected transformers (left over), phase projection of delta components remains for now
- Updated time_series to affect upper real and reactive power bounds on solar objects in dss2eng parse
- Fixed bug in dss pvsystem struct where
temperature
,pmpp
, andirradiance
were the wrong type (Int
instead ofFloat64
) - Fixed bug in dss node structs, where daily was the wrong type (should be
String
, notVector{Float64}
) - Fixed bug in
_calc_branch_power_max
wherec_rating_b
was being used - Add support for storage to OPF_OLTC
- Add wye-connected CapControl for ACP, ACR, LinDist3Flow, FBS and FOT formulations
- Added storage to
correct_bus_types!
check - Updated start values for some variables to improve performance on some solvers
- Added ability for
comp_start_value
to sequentially check for a series of keys for a start value - Added FOT linear formulation in rectangular coordinate frame
- Fixed lower voltage magnitude limits for FBS linear formulation
- Fix bug where the lower and upper bound variables created in
variable_mx_hermitian
can be the wrong type - Fix bug in correct_bus_types! and eng2math functions where reference bus was being overwritten depending on the order generation objects were parsed
- Fix
calc_max_cost_index
to support multi-infrastructure data
- Fix voltage magnitude start values, by looking for
_start
values, thenvm
, thenvmin
, to ensure start values are feasible - Fix bug in
_biggest_generator
where if generator upper bound is missing,correct_bus_types!
would fail - Adds simple transformer bounds calculations in
_calc_transformer_power_ub_frto
and_calc_transformer_current_max_frto
- Updated usage of
control_mode
property on generation objects, such thatISOCHRONOUS
leads tobus_type=3
,FREQUENCYDROOP
leads tobus_type=2
, and status beingDISABLED
leads tobus_type=1
- Fixed bug in
make_solution_si
where an error would occur if the solution was empty - Fixed bug in
build_mn_mc_mld_simple(pm::AbstractUBFModel)
where call toconstraint_mc_switch_thermal_limit
was missing keyword argumentnw=n
- Added simplified linear formulation using first-order Taylor (FOT) approximation
- Added wye-connected RegControl for ACP, ACR, LinDist3Flow and FBS formulations
- Fixed typo in
transform_data_model
whereglobal_keys
should have beenglobal_keys=global_keys
- Added power variables
Pt
andQt
for transformers toAbstractUBFModels
- Updated
_add_gen_cost_model!
to have a defaultcost
vector that is[1.0, 0.0]
instead of including a redundant first0.0
- Fixed bug in eng2math functions where there was no check on generator or storage objects when assigning bus_type on their bus to see if the gen obj was enabled or disabled
- Fixed bug in
sol_data_model
for W-space models where if the optimizer allowed some small infeasibility, it was possible to have a negativew
value, which would crash when attempting to take the square-root - Added
build_solution_values
for data of typeLinearAlgebra.Symmetric{JuMP.VariableRef, Matrix{JuMP.VariableRef}}
- Fixed bug in solution builder where building a result dict would fail if there was no solution
- Added "root-level" eng2math_passthrough option
- Fixed bug where global keys were not getting passed to
_map_eng2math
function - Added support for parsing the results of dss command
export voltages
intovm_start
andva_start
values for warm starting bus voltages - Added simplified linear UBF formulation using a single iteration of forward-backward sweep (FBS)
- Added support for raw parsing of RegControl and CapControl objects from dss
- Added delta/voltage-dependent loads to LinDist3Flow formulation
- Fix bug in
_bank_transformers!
where "status" field was not being added to banked transformers - Fix bug in
identify_load_blocks
where even fixed OPEN switches were being included in a block - Fix eng2math conversion of switches, check for whether to create impedance branches was malformed
- Fix
_fix_nulls
data type conversion for vectors from JSON inputs - Fix which variables from switch impedance branches get pulled into eng solution (add series current)
- Add power variables to solution for IVRUPowerModel to switches, similar to how they're implemented for branches
- Fix missing branch variables
csr_fr
andcsi_fr
from ibase unit conversions - Fix
apply_kron_reduction!
to recalculate theconductor_ids
after the reduction - Fix bug in transformer tap variable creation, where report variable was over all transformers instead of just ones with unfixed taps
- Fix bug in current bounds calc for branches, where if c_rating_a was missing, calc would fail
- Fix bug in eng2math conversion where "is_kron_reduced" was being looked for in the wrong place
- Fix solar pg/qg bounds calculation in dss2eng parsing (needed to be
/ nphases
) - Add ability for
control_mode
on generation objects to get bus_type on connecting buses - Fix bug in function signature of
calc_voltage_bases
- Fix bug introduced when changing construction of vbases_default in settings
- Changed Gcap calculation in reactor object parsing to use own kv value, instead of system basekv
- Added control_mode and vg to gen object in vsource eng2math conversion
- Fixed bug in
apply_phase_projection_delta!
where some padding was out of order, which could pose a problem whenapply_voltage_bounds!
was used - Changed default angmin/angmax on virtual branches to +-10deg
- Fixed missing factor sqrt(nphases) from vg definition on generator and solar objects
- Fixed bug in voltage source vnom determination, and now uses basekv from vsources to populate vbases_default
- Fixed unit conversion bug in calculating the power rating of branches from current ratings, and uses emergamps first, if it exists
- Fixed typo in
_calc_connected_components_math
, where edge_type::String was used instead of edge_obj::Dict to check properties - Fixed bug in
constraint_mc_transformer_power
constraint template, wherenw
was missing from call toref
- Fixed
solve_
functions; they were missing make_pu_extensions kwargs - Fixed
_init_math_obj
, if an object is not defined in the built-in 1to1 map const, it would error - Fixed method for user-defining custom math2eng functions
- Fixed documentation for
transform_solution
- Added
iseng
andismath
helper functions - Added dss2eng_extensions, for custom user functions for dss2eng transformations
- Added eng2math_extensions, for custom user functions for eng2math transformations
- Added eng2math_passthrough, for easily passing through properties from eng2math
- Added make_pu_extensions, for custom user functions to convert additional properties to per-unit
- Added make_si_extensions, for custom user functions to convert additional variable results back to SI units
- Added dimensionalize_math_extensions, for easily specifying multiplicative factors on additional variable results for converting back to SI units
- Added global_keys, for users to easily add to global keys which making multinetworks
- Added documentation on how to add math2eng custom functions for transforming solutions back to ENGINEERING model
- Documentation overhaul, new organization, updated docstrings, Pluto notebook building
- Improve parse of ZIPV into array, and update "duty" on loads to better default
- Add support for parsing GrowthShape objects
- Miscellaneous code comment corrections
- Refactor to use Type[] instead of Vector{Type}([]) internally for easier reading of code
- Add section on
import_all
to beginners guide - Update default %cutin and %cutout to be 20.0 on pvsystem objects
- Fix
objective_mc_max_load_setpoint
to remove iteration over "conductor_ids" - Fix
constraint_mc_voltage_magnitude_bounds
to have default (0,Inf) bounds the length of "terminals", rather than 3 phases. - Updated UBF version of power flow problem to re-enable bounded=false of bus voltage variables
- Add more descriptive error message for islanded models when attempting to calculate voltage bases
- Add
check_enabled
toggle to calc_connected_components - Updated documentation to reflect correct definition of multiple buses in a vector on transformers using
bus
instead ofbuses
- Fixed bug for eng transformers in
calc_connected_components
- Removed PowerModels.jl as a dependency, porting over any remaining dependencies (breaking) [see PR #336 for complete list of functions]
- Rename the formulation type heiracrhy to include Unbalanced, or U in the names (breaking) [see PR #336 for complete list]
- Removed Memento.jl as a dependency, and added LoggingExtras, to assist in creating easy log filters for PMD via the Julia stdlib
- Added
silence!
,set_logging_level!
,reset_logging_level!
, andrestore_global_logger!
helper functions
- Added
- Upgraded to InfrastructureModels v0.6 to support multi-infrastructure models (breaking)
- Refactor multinetwork functionality, and added helper functions for better multinetwork data handling (breaking)
- Renames
build_multinetwork
kwarg tomultinetwork
- Exports
make_multinetwork
function to users - Adds
set_time_elapsed!
,sort_multinetwork!
helper functions - Updates
_pmd_eng_global_keys
and_pmd_math_global_keys
- Renames
- Refactor
ENGINEERING
data model to allow only dict typesDict{String,<:Any}
(breaking) - Refactor conductor ids types to allow only Int (breaking)
- Refactor JSON serialization to eliminate special serializers and create special data correction function for importing (breaking)
- Convert IJulia notebooks in examples to Pluto.jl notebooks for better interactivity
- Add
apply_voltage_angle_difference_bounds!
transformation function - Remove references to
dcline
- Fix
source_id
inMATHEMATICAL
model to originate fromENGINEERING
model, rather that be passed from dss
- Add wdgcurrents, core, rdcohms support on dss transformers
- Fix bug in definition of xcsarra datatype on dss transformers
- Fix bug in opendss2pmd line parser, which would error on reshape of rmatrix, xmatrix, cmatrix when explicitly grounded and those matrices defined on line and not linecode
- Fix bug in datatype guesser
_guess_dtype
- Add support for setbusxy dss command
- Fix parsing of dss matrices and arrays with mixed delimiters (i.e., mixing commas and spaces)
- Fix bug in dss parser to better support
object=
syntax - Add support for parsing of spectrum dss objects
- Docs updates
- Add support for filetype autodetection, will be slower for large files, and filetype is better to explicitly specify in those cases
- Fix overly restrictive type enforcement in parse_dss and parse_opendss from IOStream to IO
- Fix bug in parsing of properties starting with % on pvsystem and storage objects
- Fix bug in parsing of storage kva, kvar, and pf on storage objects
- Fix bug in parsing of storage power loss parameters, which were derived from values specified in percent, not decimal
- Add support for %stored to be used to derive kwhstored if not specified explicitly
- Fix bug in buscoords parser where comments at the end of the line were not stripped
- add
exclude
kwarg toremove_all_bounds!
transformation, to selectively exclude certain asset types - fix bug in IVR transformer current variables where bounds needed to be iterated over their connections to be applied
- fix bug in objective function for opf_pbs debugging problem, wrong iteration over bus terminals
- fix typo in
variable_mc_switch_current_imaginary
that overwrote real variables (crsw) - fix bug in
_map_eng2math_switch!
where vmin/vmax were taken from f_bus instead of t_bus - fix bug in
_build_eng_multinetwork
, where "dss_options" was missing from const_pmd_eng_global_keys
- change enums (SwitchState and Dispatchable) for switches to Reals, was causing problems in loops of OSW problems
- fix bug in
variable_mc_bus_voltage_magnitude_sqr
andvariable_mc_transformer_power_imaginary
where_start
values were not being iterated over per connection - depreciate
run_
functions in favor ofsolve_
- add support for
relax_integrality
(InfrastructureModels ~0.5.4) - fix bug in
variable_mx_real
constructor where it was indexing over terminals instead of enumerates - added storage variables to automatic unit conversion to si units on math2eng transformation
- Fix buspairs ref not getting built
- Fix bug in storage linear constraints and mixed integer variable instantiation
- Add support for ideal (lossless) switches
- Fix bug in handling of dss edit command
- Fix bug in correctly tracking current transformer winding
- Fixes bug in assignment of variables' start values over active conductors/connections
- Refactor variables, constraints, objectives to support iterating over arbitrary connections/terminals (breaking)
- Add
ref_add_connections!
that adds lists of connections to ref for each component (breaking) - Rename constraint and variable functions to better match PowerModels conventions (breaking)
- variable_mc_gen_power_setpoint -> variable_mc_generator_power
- variable_mc_gen_power_setpoint_on_off -> variable_mc_generator_power_on_off
- constraint_mc_gen_setpoint -> constraint_mc_generator_power
- constraint_mc_slack_power_balance -> constraint_mc_power_balance_slack
- constraint_mc_shed_power_balance -> constraint_mc_power_balance_shed
- constraint_mc_load_power_balance -> constraint_mc_power_balance
- variable_mc_load_setpoint -> variable_mc_load_power
- constraint_mc_load_setpoint -> constraint_mc_load_power
- Updates objective function for MLD problem (breaking)
- Add
correct_mc_voltage_angle_differences
,correct_mc_thermal_limits
- Removed support for JuMP < v0.21 (breaking)
- Overrides
_objective_min_fuel_cost_polynomial_linquad
from PowerModels to support arbitrary connections on generators - Updated solution building functions to automatically parse arbitrarily-sized vectors of variables into solutions
- Changed
Array{...,1}
toVector{...}
andArray{...,2}
toMatrix{...}
- Removes phase projection by default, but keeps phase projection for delta connected components for now (breaking)
- Adds
apply_phase_projection_delta!
to project phases of delta connected components - Fixes grounding logic for generator and solar objects
- Fixes bug in parsing of file paths on windows in redirect/compile dss commands
- Adds multiconductor version of the OPF objective function
objective_mc_min_fuel_cost
- Update publication in README
- Fixes bug in json parser (typo)
- Fixes bug in dss parser that skips some files with same names as previously parsed files
- Fix bug in buscoords parser to support more valid buscoords files
- Fix bug in parse_json(::String) which passed additional unused argument to parse_json(::IO)
- Add possibility to give vm_start in variable_mc_voltage for ivr and acr formulations
- Remove leftover code that was causing a warning on import, but was not breaking the implementation
- Add multinetwork MLD and OPF problem specifications
- Add support for storage components and mld problem in ACR formulation
- Add storage variables and constraints to OPF, PF, and MLD problems
- Fix bug in
con
mapping in power balance constraints where an array was expected - Fix bug in
constraint_mc_shed_power_balance
where Gt, Bt were not defined - Fix bug in the status of virtual branches created from switches where the status of the switch was not taken into account, only the state
- Fix bug in transformer parsing where
status
wasn't being included - Fix constraint for PV buses, which were attempting to be applied in places where
vm
was not specified - Fix bug in type enforcement of
map
argument intransform_solution
- Fix storage parsing including unit conversion and inclusion of time_elapsed from the root level
- Add wye-wye and delta-wye constraints to LPUBFDiagModel formulation
- Fix typo in ivr formulation line 548, was var(pm, nw, :crg_bus, id) now is var(pm, nw, :cig_bus, id)
- Fix missing / incorrect type of some properties on lines in opendss parser (#290)
- Fix connections-determining-code on solar and storage objects to generator object syntax (#291)
- Refactors Kron reduction and padding transformations out of eng2math into their own transformation functions (#287)
- Add functionality of run_mc_mld_bf to run_mc_mld via multiple dispatch
- Fixes inconsistency of connections on MATHEMATICAL components, in particular, virtual objects (#280)
- Add a transformation remove_all_bounds! that removes all fields ending in _ub and _lb (#278)
- Add missing connections for virtual generator at voltage source
- Fix pu conversion bus voltage bounds and add parsing for vm_pair_lb and vm_pair_ub
- Add CONTRIBUTING.md
- Add pull request template
- Add Pull Request Checks (Github Actions), to inform developers of potentially missing aspects of their PR
- Store references for power balance constraints
- Add
instantiate_mc_model
to aid in building JuMP model from ENGINEERING data model - SDP and SOC relaxations were broken but are fixed again (unit tests added)
- Remove
run_mc_opf_iv
,run_mc_opf_bf
,run_mc_opf_bf_lm
,run_mc_pf_bf
,run_mc_pf_iv
, these can be accessed by using the correct formulation withrun_mc_opf
andrun_mc_pf
- Add support for Memento 1.1
- Add support for PowerModels v0.17 (breaking)
- Add support for InfrastructureModels v0.5
- Updates JSON parser to handle enum (
"data_model"
values) - Adds some commonly used InfrastructureModels and PowerModels functions as exports
- Adds model building functions
add_{component}!
to aid in building simple models for testing (experimental) - Add
run_mc_model
(addsref_add_arcs_transformer!
to ref_extensions, and setsmulticonductor=true
by default) (breaking) - Rename
ref_add_arcs_trans
->ref_add_arcs_transformer
(breaking) - Update
count_nodes
, now counts source nodes as well, excludes _virtual objects - Change _PMs and _IMs to _PM, _IM, respectively
- Add example for PowerModelsDistribution usage (see Jupyter notebooks in
/examples
) - Update transformer mathematical model
- Introduce new data models: ENGINEERING, MATHEMATICAL (see data model documentation) (breaking)
- Update DSS parser to be more robust, and parse into new format (breaking)
- Updates DSS paser to parse more options/commands, moves these into
"options"
dict (breaking) - Updates how dss
like
is applied to better match opendss (almost all properties are copied with like) (breaking) - Add support for new OpenDSS components (loadshape, xfmrcode, xycurve)
- Add support for JuMP v0.22 (exports
optimizer_with_attributtes
by default) - Add support for PowerModels v0.16 (breaking)
- Add support for Memento v0.13, v1.0
- Update to support JuMP v0.21
- Makes bounds optional, turned on by default (#250)
- Updated transformer data model in the mathematical model (#250)
- Add automatic parsing of lon,lat from buscoords file into PowerModelsDistribution data structure (#245, #249)
- Updates virtual_sourcebus, which is intended to represent a voltage source, to have a fixed voltage magnitude (#246,#248)
- Add parsing of series data files into array fields in OpenDSS parser
- Add LoadShape parsing to OpenDSS parser (#247)
- The pf and opf problem specifications now contain delta connected, and voltage-dependent load models by default; pf_lm and opf_lm were removed.
- Generators can now also be connected in both delta and wye.
- The delta/voltage-dependent loads in the ACP power models were refactored to be consistent with the new ones.
- The non-linear formulations now support matrix shunts.
- A current-voltage (IVR) formulation was added, and supports all features that ACP supports as well.
- Several power balance constraints now require NLconstraints because the load power/current can contain a NLexpression. This might be optimized further in the future if it leads to performance issues.
- Update solution building infrastructure (PowerModels #77) (breaking). The reported solution is now consistent with the variable space of the formulation.
- Moved multi-conductor support from PowerModels into PowerModelsDistribution. (breaking)
- PowerModels.var no longer takes conductor as an argument
- Constraints have been (partially) re-written to use vectorized JuMP syntax where possible.
- Bugfixes: generator on-off and storage on-off constraints were incorrect
- Removal of SOCWRPowerModel
- Drop support for matpower format
- Possible regressions in MLD problem types
- Simplified linear UBF formulations. LPLinUBFModel and LPdiagUBFModel are equivalent, and are replaced by LPUBFDiagModel. The more popular name 'LinDist3FlowModel' was added as an alias for LPUBFDiagModel.
- The linearization by Gan & Low is also equivalent to LPUBFDiagModel, though it has redundudant variables and equations. LPfullUBFModel is now implemented as an alias of LPUBFDiagModel, 'LPUBFFullModel'.
- Updates function names for PowerModels v0.14 compatibility (breaking) (#194)
- Fixed bug with new default SCS settings causing tests to fail (#190)
- Changed unit test '5-bus independent radial different sdpubf opf_bf', testing vm instead of qg
- Added exponential load models, including convex relaxations
- Refactored branch flow relaxations
- Added helper functions for creating matrix variables
- Cleaned up the transformer/oltc methods, including ACP formulation
- added
rate_a
setting to virtual lines (#185, #186)
- Adds
count_nodes
function to count the number of nodes in a parsed network (#183) - Exports
find_bus
andfind_component
functions for better user experience (#183) - Fixed
solution_bf!
for branch flow solution building (#182) - Refactored problem definitions to remove any explicit loops over conductors (#181)
- Added data format documentation (#180)
- Moved storage to main MLD and OPF problems (#179)
- Refactor to remove dcline variables and constraints (#179)
- Refactor to genericize
constraint_mc_power_balance
(#179) - Fix bug in OpenDSS circuit initialization (vsource) (#178)
- Make current rating (c_rating_a|b|c) be the default on branches (breaking)
- Fix bug in transformer
ref
extension where all refs were not built for allnw
in multinetworks (#171) - Fix bug in OpenDSS parser where properties were not applied in the order they were received (#170)
- Rename "trans" in data and ref to
transformer
for component naming consistency (breaking) (#169) - Change internal variable and constraint functions to loop over phases internally (breaking) (#168)
- Fix bug in OpenDSS parser on Lines where the connected phases are listed out of order (#167)
- Add ability to "bank" single phase OpenDSS transformers into a single multiphase transformer (#166)
- Add virtual line to sourcebus to model source impedance (#165)
- Update to JuMP v0.20 / MOI v0.9 (#164)
- Fix bug in OpenDSS parser on Lines / Linecodes related to basefreq (#163)
- Fix bug in OpenDSS parser on Transformers (#162)
- Fix bug in OpenDSS parser on Lines where
switch=y
property is used (#161) - Update Formulation types to follow PowerModels v0.13 conventions (breaking) (#160)
- Fix bug in OpenDSS parser on Capacitors (#158)
- Add support for full matrix line shunts (#153)
- Add continuous load shedding problem (mld)
- Enforce function naming conventions (starts with
_
: internal function; ends with!
: transforms data;correct_
: corrects network data;check_
: warnings about network data) (breaking) - Update for PowerModels.jl v0.12 (breaking)
- Enforce constraint/variable naming conventions to include
_tp
(breaking) - Add automatic export of non-internal functions (all functions not prefixed with
_
) - Enforce function naming conventions (starts with
_
: internal function; ends with!
: transforms data;correct_
: corrects network data;check_
: warnings about network data)
- First version of PowerModelsDistribution.jl
- Final version of ThreePhasePowerModels.jl before name change to PowerModelsDistribution.jl (adds depreciation warnings)
- Allow for arbitrarily named sourcebus
- Add json parser
- Add support for additional load models (constant power, constant impedance, constant current; delta or wye connected) (#127)
- Fix bug in OpenDSS parse of Capacitors [zbase factor and wrong sign] (#138)
- Add voltage balance constraints (#129)
- Update to JuMP v0.19/MathOptInterface
- Add transformer support to active power only models
- Fix bug in source_ids of new components created for transformer support
- Add transformer to TPPM: wye and delta windings, vector group variations (indirectly) and variable taps per phase with bounds
- Add ACPForm for transformers
- Add transformer parsing to OpenDSS, including mapping of loss model
- Add voltage base calculation, and corresponding change of base
- Add AC rectangular formulation
- Remove support for Julia versions < 1.0
- Switch to using
import
instead ofusing
internally
- Minor fix to OpenDSS line parsing (length units mismatch with linecode)
- Update to PowerModels v0.9
- Add opf with multi-phase storage model
- Add support for parsing OpenDSS Storage objects
- Minor fix to branch parsing in matlab format
- Minor fix to OpenDSS parser (parsing ~ lines with preceeding whitespace)
- Fixed parsing OpenDSS files containing redirect/compile/buscoords on case-sensitive filesystems
- Add 'source_id' field to components parsed from OpenDSS, to help determine origin and active phases
- Add conversion of OpenDSS PVSystem objects into generators, using KVA for generator limits
- Add compatibility for Julia v0.7/v1.0
- Add support for network flow approximation formulation, NFAUPowerModel
- Updates to problem specifications
- Update tests for SCS v0.4
- Minor improvements to OpenDSS parser
- Added a variety of matrix-based branch flow formulations
- Updated LPLinUBFForm to more closely match published refrence model
- Update MINLP solvers used in testing
- Added basic docs setup
- Minor improvements to OpenDSS parser #29, #59, #62, #63, #64, #65
- Initial release