Skip to content

Latest commit

 

History

History
186 lines (124 loc) · 3.87 KB

instructions_raspberry_pi.md

File metadata and controls

186 lines (124 loc) · 3.87 KB
Raw

Complete instructions raspberry pi

Install raspbian

See guide

Update the system

sudo apt-get clean
sudo apt-get update
sudo apt-get upgrade

Prepare system for Pong

Go to settings->pi-settings und set video memory to 512mb

Set cli as startup option to save memory.

Install Pong

Ether you can choose to compile the sourcecode yourself or install the binary

Install from binary

wget https://github.com/KAZOOSH/Pong/releases/download/0.1-preRelease/Pong_0.1-preRelease_raspbian.tar.gz
tar -xvkzf p.tar.gz

Compile form source

Clone repository

git clone https://github.com/KAZOOSH/Pong

Download and extract openFrameworks v0.9.3 in Pong repository

wget http://www.openframeworks.cc/versions/v0.9.3/of_v0.9.3_linuxarmv6l_release.tar.gz
tar -xvkzf of_v0.9.3_linuxarmv6l_release.tar.gz
mv -n of_v0.9.3_linuxarmv6l_release/* Pong/
mv -n of_v0.9.3_linuxarmv6l_release/addons/* Pong/addons
rm -R of_v0.9.3_linuxarmv6l_release

Prepare openFrameworks (see instructions pi).

Install dependencies

cd /home/pi/openFrameworks/scripts/linux/debian
sudo ./install_dependencies.sh

make

make Release -C /home/pi/openFrameworks/libs/openFrameworksCompiled/project -j4

compile Pong

cd /home/pi/openFrameworks/apps/Pong/pong
make
make run

Set USB controller as persistent device

We have to identify the two controllers first. With lsusb you get a list of the connected Serial Devices. Connect the Arduino for one controller and list the devices. You get a list like

~ # lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 011: ID 0403:6001 Arduino UNO R5
[...]

Enter /dev/tty and tab to get the device names. The Arduino should be named like ttyAM.... Then we get the details of the device by entering

udevadm info -a -n /dev/ttyUSB1 | grep '{serial}' | head -n1
udevadm info -a -n /dev/ttyUSB1 | grep '{idVendor}' | head -n1
udevadm info -a -n /dev/ttyUSB1 | grep '{idProduct}' | head -n1

Copy all this informations. Go to /etc/udev/rules.d Create a file named 99-usb-serial.rules:

cd /etc/udev/rules.d
sudo nano 99-usb-serial.rules

Enter the following line (of course, use your values):

SUBSYSTEM=="tty", ATTRS{idVendor}=="0403", ATTRS{idProduct}=="6001", ATTRS{serial}=="A6008isP", SYMLINK+="controllerLeft"

Do this for all the controllers. With this information you have to edit the settings.xml.

sudo nano /home/pi/openFrameworks/apps/Pong/pong/bin/data/settings.xml

Reset the port values and activate serial control

<isSerialControl>1</isSerialControl>
<portLeftPaddle>controllerLeft</portLeftPaddle>
<portRightPaddle> controllerRight</portRightPaddle>

More information on this at (persistent USB).

Install fadeCandy

To interface we need to install the fadeCandy-driver.

git clone git://github.com/scanlime/fadecandy

cd fadecandy/server
make submodules
make

Copy fcserver for autorun

sudo mv fcserver /usr/local/bin

Configure autostart

Copy Pong in local/bin

cd /usr/local/bin
sudo mkdir Pong
sudo cp -R /home/pi/openFrameworks/apps/Pong/pong/bin/* /usr/local/bin/Pong

edit rc.local

sudo nano /etc/rc.local

Before exit 0 set fcserver and Pong to start


#!/bin/sh -e
#
# rc.local
#
# This script is executed at the end of each multiuser runlevel.
# Make sure that the script will "exit 0" on success or any other
# value on error.
#
# In order to enable or disable this script just change the execution
# bits.
#
# By default this script does nothing.
  
/usr/local/bin/fcserver &    # start fcserver  
/usr/local/bin/Pong/pong     # start Pong
  
exit 0

Done!