Author: Vicente Mataix Ferrándiz
Kratos version: 7.1
Source files: Channel sphere 3D
In this test case,
The following applications of Kratos are used:
- FluidDynamicsApplication with the MMG module
- MeshingApplication with the MMG module
Adaptative remeshing of 3D fluid channel with sphere using Hessian of velocity as metric measure. It consists in a channel 3x1x1, a sphere of 0.5 diameter and with a velocity of 1 m/s in the inlet an zero pressure in the outlet. The total time of simulation is 1.2s with a time step of 0.01s. The remeshing is performed each 20 steps.
The mesh corresponding before remeshing corresponds with:
The results obtained corresponds with the following:
Frédéric Alauzet. Metric-Based Anisotropic Mesh Adaptation. Course material, CEA-EDF-INRIA Schools. Numerical Analysis Summer School. https://www.rocq.inria.fr/gamma/Frederic.Alauzet/cours/cirm.pdf
Pascal Tremblay 2-D, 3-D and 4-D Anisotropic Mesh Adaptation for the Time-Continuous Space-Time Finite Element Method with Applications to the Incompressible Navier-Stokes Equations. PhD thesis Ottawa-Carleton Institute for Mechanical and Aerospace Engineering, Department of Mechanical Engineering, University of Ottawa. 2007. http://aix1.uottawa.ca/~ybourg/thesis/PhDThesis_Pascal_Tremblay_Final.pdf