Skip to content

Latest commit

 

History

History
58 lines (36 loc) · 2.42 KB

File metadata and controls

58 lines (36 loc) · 2.42 KB

Lamborghini remeshing

Author: Vicente Mataix Ferrándiz

Kratos version: 7.1

Source files: Lamborghini (Please decompress the mdpa file)

Case Specification

In this test case we want to remesh anisotropically the geometry of Lamborghini, more complex that the previous bunny.

The following applications of Kratos are used:

  • FluidDynamicsApplication
  • MeshingApplication with the MMG module

The problem corresponds with the figures:

Lamborghini

Lamborghini

The challenge consists in meshing anisotropically the geometry using as error measure the gradient of the distance, measured previously with an octree mesher (GiD). The STL file used can be found here

The mesh corresponding before remeshing corresponds with:

Octree

Octree

Results

The results obtained after remeshing can be see in the following figure:

Solution

In detail:

Distance detail

References

Frédéric Alauzet. Metric-Based Anisotropic Mesh Adaptation. Course material, CEA-EDF-INRIA Schools. Numerical Analysis Summer School. https://www.rocq.inria.fr/gamma/Frederic.Alauzet/cours/cirm.pdf

Pascal Tremblay 2-D, 3-D and 4-D Anisotropic Mesh Adaptation for the Time-Continuous Space-Time Finite Element Method with Applications to the Incompressible Navier-Stokes Equations. PhD thesis Ottawa-Carleton Institute for Mechanical and Aerospace Engineering, Department of Mechanical Engineering, University of Ottawa. 2007. http://aix1.uottawa.ca/~ybourg/thesis/PhDThesis_Pascal_Tremblay_Final.pdf