Helpers.md

You must create the following Helpers in HA. This is more of a manual process as there is no way to directly copy the code across, but should take no more than 5 minutes.

Installation

1. Click Settings > Devices & Services > Helpers > + "Create Helper"

2. Use the 3rd line of each of the items below to choose helpers (number, toggle or button). Name them exactly the same as specified in each title. Your max/min and step sizes will be dependant on your own needs, but my numbers here should serve as a suitable starting point for most (if not all) installations.

Base Load

• input_number.base_load
• Number
• Minimum Value: 0
• Maximum Value: 1
• Step Size: 0.01
• Unit of Measurement: kW

Battery Capacity

• input_number.battery_capacity
• Number
• Minimum Value: 1
• Maximum Value: 50
• Step Size: 1
• Unit of Measurement: kWh

Battery Heat

• input_button.battery_heat
• Button

Boost Charge

• input_number.boost_charge
• Number
• Minimum Value: 0
• Maximum Value: 15
• Step Size: 1
• Unit of Measurement: kWh

Cooling Fans

• input_button.cooling_fans
• Button

Expected Consumption

• input_number.expected_consumption
• Number
• Minimum Value: 0
• Maximum Value: 50
• Step Size: 0.5
• Unit of Measurement: kWh

Expected Consumption Tomorrow

• input_number.expected_consumption_tomorrow
• Number
• Minimum Value: 0
• Maximum Value: 50
• Step Size: 0.5
• Unit of Measurement: kWh

Flux Discharge

• input_boolean.flux_discharge
• Toggle

Force Charge SoC

• input_number.force_charge_soc
• Number
• Minimum Value: 0
• Maximum Value: 50
• Step Size: 1
• Unit of Measurement: %

Overdischarge SoC

• input_number.overdischarge_soc
• Number
• Minimum Value: 0
• Maximum Value: 50
• Step Size: 1
• Unit of Measurement: %

Reset Consumption Defaults

• input_button.reset_consumption_defaults
• Button

Target Usable SoC

• input_number.target_usable_soc
• Number
• Minimum Value: 0
• Maximum Value: 20
• Step Size: 1
• Unit of Measurement: kWh