Skip to content

Latest commit

 

History

History
2320 lines (1682 loc) · 73.8 KB

CHANGELOG.md

File metadata and controls

2320 lines (1682 loc) · 73.8 KB
Raw

Changelog

v11.0.0 - The one that auto-registers

Say hello to support for automatic passkey registration, support for valid conditional UI <input> elements stashed away in web components, and to the new WebAuthnCredential type that modernizes some logic within.

There are some breaking changes in this release! Please see Breaking Changes below for refactor guidance.

Packages

Changes

  • [browser] [server] A new useAutoRegister argument has been added to startRegistration() to support attempts to automatically register passkeys for users who just completed non-passkey auth. verifyRegistrationResponse() has gained a new requireUserPresence option that can be set to false when verifying responses from startRegistration({ useAutoRegister: true, ... }) (#623)
  • [browser] A new verifyBrowserAutofillInput argument has been added to startAuthentication() to disable throwing an error when a correctly configured <input> element cannot be found (but perhaps a valid one is present in a web component shadow's DOM) (#621)
  • [server] [types] The AuthenticatorDevice type has been renamed to WebAuthnCredential and has had its properties renamed. The return value out of verifyRegistrationResponse() and corresponding inputs into verifyAuthenticationResponse() have been updated accordingly. See Breaking Changes below for refactor guidance (#625)
  • [server] verifyRegistrationResponse() now verifies that the authenticator data AAGUID matches the leaf cert's id-fido-gen-ce-aaguid extension AAGUID when it is present (#609)
  • [server] TPM attestation verification recognizes the corrected TPM manufacturer identifier for IBM (#610)
  • [server] Types for the defunct authenticator extensions uvm and dpk have been removed (#611)

Breaking Changes

[browser] Positional arguments in startRegistration() and startAuthentication() have been replaced by a single object

Property names in the object match the names of the previously-positional arguments. To update existing implementations, wrap existing options in an object with corresponding properties:

Before:

startRegistration(options);
startAuthentication(options, true);

After:

startRegistration({ optionsJSON: options });
startAuthentication({ optionsJSON: options, useBrowserAutofill: true });

[server] [types] The AuthenticatorDevice type has been renamed to WebAuthnCredential

AuthenticatorDevice.credentialID and AuthenticatorDevice.credentialPublicKey have been shortened to WebAuthnCredential.id and WebAuthnCredential.publicKey respectively.

verifyRegistrationResponse() has been updated accordingly to return a new credential value of type WebAuthnCredential. Update code that stores credentialID, credentialPublicKey, and counter out of verifyRegistrationResponse() to store credential.id, credential.publicKey, and credential.counter instead:

Before:

const { registrationInfo } = await verifyRegistrationResponse({...});

storeInDatabase(
  registrationInfo.credentialID,
  registrationInfo.credentialPublicKey,
  registrationInfo.counter,
  body.response.transports,
);

After:

const { registrationInfo } = await verifyRegistrationResponse({...});

storeInDatabase(
  registrationInfo.credential.id,
  registrationInfo.credential.publicKey,
  registrationInfo.credential.counter,
  registrationInfo.credential.transports,
);

Update calls to verifyAuthenticationResponse() to match the new credential argument that replaces the authenticator argument:

Before:

import { AuthenticatorDevice } from '@simplewebauthn/types';

const authenticator: AuthenticatorDevice = {
  credentialID: ...,
  credentialPublicKey: ...,
  counter: 0,
  transports: [...],
};

const verification = await verifyAuthenticationResponse({
  // ...
  authenticator,
});

After:

import { WebAuthnCredential } from '@simplewebauthn/types';

const credential: WebAuthnCredential = {
  id: ...,
  publicKey: ...,
  counter: 0,
  transports: [...],
};

const verification = await verifyAuthenticationResponse({
  // ...
  credential,
});

v10.0.1

Packages

Changes

  • [server] isoCrypto.verify() now has better support for signature verification with ECC public keys using P-256, P-385, and P-521 curves (#594, with thanks to @nlordell)

v10.0.0 - The one that goes up to 20

Thanks for everything, Node 16 and Node 18, but it's time to move on! The headlining change of this release is the targeting of Node LTS v20+ as the minimum Node runtime. Additional developer-centric quality-of-life changes have also been made in the name of streamlining use of SimpleWebAuthn on both the back end and front end.

This release is packed with updates, so buckle up! Refactor advice for breaking changes is, as always, offered below.

Packages

Changes

  • [server] The minimum supported Node version has been raised to Node v20 (#531)
  • [server] user.displayName now defaults to an empty string if a value is not specified for userDisplayName when calling generateRegistrationOptions() (#538)
  • [browser] The browserSupportsWebAuthnAutofill() helper will no longer break in environments in which PublicKeyCredential is not present (#557, with thanks to @clarafitzgerald)

Breaking Changes

  • [server] The following breaking changes were made in PR #529:
    • generateRegistrationOptions() now expects Base64URLString for excluded credential IDs
    • generateAuthenticationOptions() now expects Base64URLString for allowed credential IDs
    • credentialID returned from response verification methods is now a Base64URLString
    • AuthenticatorDevice.credentialID is now a Base64URLString
    • isoBase64URL.isBase64url() is now called isoBase64URL.isBase64URL()
  • [browser, server] The following breaking changes were made in PR #552:
    • generateRegistrationOptions() now accepts an optional Uint8Array instead of a string for userID
    • isoBase64URL.toString() and isoBase64URL.fromString() have been renamed
    • generateRegistrationOptions() will now generate random user IDs
    • user.id is now treated like a base64url string in startRegistration()
    • userHandle is now treated like a base64url string in startAuthentication()
  • [server] rpID is now a required argument when calling generateAuthenticationOptions() (#555)

[server] generateRegistrationOptions() now expects Base64URLString for excluded credential IDs

The isoBase64URL helper can be used to massage Uint8Array credential IDs into base64url strings:

Before

const opts = await generateRegistrationOptions({
  // ...
  excludeCredentials: devices.map((dev) => ({
    id: dev.credentialID, // type: Uint8Array
    type: 'public-key',
    transports: dev.transports,
  })),
});

After

import { isoBase64URL } from '@simplewebauthn/server/helpers';

const opts = await generateRegistrationOptions({
  // ...
  excludeCredentials: devices.map((dev) => ({
    id: isoBase64URL.fromBuffer(dev.credentialID), // type: string
    transports: dev.transports,
  })),
});

The type argument is no longer needed either.

[server] generateAuthenticationOptions() now expects Base64URLString for allowed credential IDs

Similarly, the isoBase64URL helper can also be used during auth to massage Uint8Array credential IDs into base64url strings:

Before

const opts = await generateAuthenticationOptions({
  // ...
  allowCredentials: devices.map((dev) => ({
    id: dev.credentialID, // type: Uint8Array
    type: 'public-key',
    transports: dev.transports,
  })),
});

After

import { isoBase64URL } from '@simplewebauthn/server/helpers';

const opts = await generateAuthenticationOptions({
  // ...
  allowCredentials: devices.map((dev) => ({
    id: isoBase64URL.fromBuffer(dev.credentialID), // type: Base64URLString (a.k.a string)
    transports: dev.transports,
  })),
});

The type argument is no longer needed either.

[server] credentialID returned from response verification methods is now a Base64URLString

It is no longer necessary to manually stringify credentialID out of response verification methods:

Before

import { isoBase64URL } from '@simplewebauthn/server/helpers';

// Registration
const { verified, registrationInfo } = await verifyRegistrationResponse({ ... });
if (verified && registrationInfo) {
  const { credentialID } = registrationInfo;
  await storeInDatabase({ credIDString: isoBase64URL.fromBuffer(credentialID), ... });
}

// Authentication
const { verified, authenticationInfo } = await verifyAuthenticationResponse({ ... });
if (verified && authenticationInfo) {
  const { newCounter, credentialID } = authenticationInfo;
  dbAuthenticator.counter = authenticationInfo.newCounter;
  await updateCounterInDatabase({
    credIDString: isoBase64URL.fromBuffer(credentialID),
    newCounter,
  });
}

After

// Registration
const { verified, registrationInfo } = await verifyRegistrationResponse({ ... });
if (verified && registrationInfo) {
  const { credentialID } = registrationInfo;
  await storeInDatabase({ credIDString: credentialID, ... });
}

// Authentication
const { verified, authenticationInfo } = await verifyAuthenticationResponse({ ... });
if (verified && authenticationInfo) {
  const { newCounter, credentialID } = authenticationInfo;
  dbAuthenticator.counter = authenticationInfo.newCounter;
  await updateCounterInDatabase({ credIDString: credentialID, newCounter });
}

[server] AuthenticatorDevice.credentialID is now a Base64URLString

Calls to verifyAuthenticationResponse() will need to be updated to encode the credential ID to a base64url string:

Before

const verification = await verifyAuthenticationResponse({
  // ...
  authenticator: {
    // ...
    credentialID: credIDBytes,
  },
});

After

import { isoBase64URL } from '@simplewebauthn/server/helpers';

const verification = await verifyAuthenticationResponse({
  // ...
  authenticator: {
    // ...
    credentialID: isoBase64URL.fromBuffer(credIDBytes),
  },
});

[server] isoBase64URL.isBase64url() is now called isoBase64URL.isBase64URL()

Note the capitalization change from "url" to "URL" in the method name. Update calls to this method accordingly.

[server] generateRegistrationOptions() will now generate random user IDs

[browser] user.id is now treated like a base64url string in startRegistration()

[browser] userHandle is now treated like a base64url string in startAuthentication()

A random identifier will now be generated when a value is not provided for the now-optional userID argument when calling generateRegistrationOptions(). This identifier will be base64url-encoded string of 32 random bytes. RPs that wish to take advantage of this can simply omit this argument.

Additionally, startRegistration() will base64url-decode user.id before calling WebAuthn. During auth startAuthentication() will base64url-encode userHandle in the returned credential. This should be a transparent change for RP's that simply feed @simplewebauthn/server options output into the corresponding @simplewebauthn/browser methods.

However, RP's that wish to continue generating their own user identifiers will need to take additional steps to ensure they get back user IDs in the expected format after authentication.

Before (SimpleWebAuthn v9)

// @simplewebauthn/server v9.x
const opts = generateRegistrationOptions({
  // ...
  userID: 'randomUserID',
});
// @simplewebauthn/browser v9.x
const credential = await startAuthentication(...);
sendToServer(credential);
// @simplewebauthn/server v9.x
const credential = await receiveFromBrowser();
console.log(
  credential.response.userhandle, // 'randomUserID'
);

After (SimpleWebAuthn v10)

// @simplewebauthn/server v10.x
import { isoUint8Array } from '@simplewebauthn/server/helpers';

const opts = generateRegistrationOptions({
  // ...
  userID: isoUint8Array.fromUTF8String('randomUserID'),
});
// @simplewebauthn/browser v10.x
const credential = await startAuthentication(...);
sendToServer(credential);
// @simplewebauthn/server v10.x
import { isoBase64URL } from '@simplewebauthn/server/helpers';

const credential = await receiveFromBrowser();
console.log(
  isoBase64URL.toUTF8String(credential.response.userhandle), // 'randomUserID'
);

[server] isoBase64URL.toString() and isoBase64URL.fromString() have been renamed

The method names have been updated to reflect the use of UTF-8 string encoding:

Before:

const foo = isoBase64URL.toString('...');
const bar = isoBase64URL.fromString('...');

After:

const foo = isoBase64URL.toUTF8String('...');
const bar = isoBase64URL.fromUTF8String('...');

[server] rpID is now a required argument when calling generateAuthenticationOptions()

Update calls to this method to specify the same rpID as passed into generateRegistrationOptions():

Before

  generateRegistrationOptions({ rpID: 'example.com', ... });
generateAuthenticationOptions();

After

  generateRegistrationOptions({ rpID: 'example.com', ... });
generateAuthenticationOptions({ rpID: 'example.com' });

v9.0.3

Packages

Changes

  • [server] Fixed "Cannot find module 'cbor-x/index-no-eval' or its corresponding type declarations" build errors when transpiling TypeScript projects using @simplewebauthn/server (#521)

v9.0.2

Packages

Changes

  • [server] Improved support for Next.js Edge runtime (#518, with thanks to @balazsorban44)

v9.0.1

Packages

Changes

  • [server] Fixed an issue with use with CBOR handling in runtime environments that restrict use of eval() (#511, with thanks to @Maronato)
  • [browser, types] Monorepo version sync

v9.0.0 - The one in which 11 characters were saved

Packages

Changes

  • [types] The @simplewebauthn/typescript-types package has been renamed to @simplewebauthn/types (#508)

Breaking Changes

  • Any reference to @simplwebauthn/typescript-types will need to be replaced with the new package name @simplewebauthn/types:

Before:

import { ... } from '@simplwebauthn/typescript-types';

After:

$> npm uninstall @simplewebauthn/typescript-types
$> npm install -D @simplewebauthn/types
import { ... } from '@simplwebauthn/types';

v8.3.7

Packages

Changes

  • [browser] The WebAuthnError class can now be imported from @simplewebauthn/browser for simpler error detection and handling when calling startRegistration() and startAuthentication() (#505, with thanks to @zoontek)
  • [server] The COSEPublicKeyEC2, COSEPublicKeyOKP, and COSEPublicKeyRSA types can now be imported from @simplwebauthn/server/helpers to help type possible return values from decodeCredentialPublicKey() (#504, with thanks to @mmv08)
  • [server] Custom challenge strings passed to generateRegistrationOptions() will now be treated as UTF-8 strings to align with the existing behavior of generateAuthenticationOptions() (#507)

v8.3.6

Packages

Changes

  • [server] Updated dependencies to fix an issue with ASN.1 parsing when calling verifyAuthenticationResponse() (#499)

v8.3.5

Packages

Changes

  • [server] Use of the Web Crypto API in edge runtimes has been improved (#472)

v8.3.4

Packages

Changes

  • [server] The library will now try to use globalThis.crypto first before trying to import Node's node:crypto as a fallback (#468)
  • [browser, types] Version sync

v8.3.3

Packages

Changes

  • [server, types] deno vendor will no longer error out because typescript-types/src/dom.ts is missing (#466)
  • [server] Authenticator data will now be preserved after bad CBOR encoding is detected and temporarily fixed when handling security key responses from Firefox (#465)
  • [browser] Version sync due to changes in typescript-types

v8.3.2

Packages

Changes

  • [server] The cbor-x dependency is now used without pulling in the Node-specific stream API for better Web API environment compatibility (#455, with thanks to @Maronato)

v8.3.1

Packages

Changes

  • [browser] Calling startAuthentication(..., true) to set up conditional UI will now require the "webauthn" value in an input's autocomplete="..." be either the only value or the last value (#451)

v8.3.0

Packages

Changes

  • [browser] The WebAuthnAbortService singleton can now be imported, with a cancelCeremony() method that can be called to manually cancel any active WebAuthn ceremonies. This can be used by developers building projects that use client-side routing to better control the behavior of their UX in response to router navigation events. (#449)

v8.2.1

Packages

Changes

  • [browser] startRegistration() will visibly warn in the browser console when a WebAuthn API method call errors out in a way that is likely due to a browser extension intercepting the API (#447)

v8.2.0

Packages

Changes

  • [browser] startRegistration() will no longer error out on registration responses generated by the 1Password browser extension (#443, with thanks to @unix)
  • [browser] Helper methods base64URLStringToBuffer() and bufferToBase64URLString() are now exported from @simplewebauthn/browser (#444)
  • [server] verifyRegistrationResponse() and verifyAuthenticationResponse() now accept a new expectedType argument that can be used to, for example, verify Secure Payment Confirmation responses (#436, with thanks to @fabiancook)
  • [server] Responses containing malformed authenticator data returned from Firefox 117 will no longer raise an error (#441)

v8.1.1

Packages

Changes

  • [server] Debug logger output from MetadataService has been disabled (#434)

v8.1.0

Packages

Changes

  • [server] The expectedChallenge argument for verifyRegistrationResponse() and verifyAuthenticationResponse() methods now also accept asynchronous methods (#432, with thanks to @jordanbtucker)

v8.0.2

Packages

Changes

  • [browser] The NPM package now targets ES2021 for support in older browsers like Safari 13.1 (#429)

v8.0.1

Packages

Changes

  • [server] Node projects with "type": "module" in their package.json will no longer error out when trying to use methods that leverage the Crypto APIs (#428)

v8.0.0 - Around the (ESM) World

This major release marks the completion of a long journey that started with the release of v7.0.0: SimpleWebAuthn is now available for use in non-Node projects! 🎉

SimpleWebAuthn debuted in mid-2020 as a combination of libraries aiming to make WebAuthn simpler to use across browsers and "NodeJS + CommonJS" applications. Since then NodeJS has evolved to gain ESM support, and additional JavaScript and TypeScript runtimes have debuted that offer ESM-centric, TypeScript-first alternatives while also implementing Web APIs to offer a more consistent and capable execution environment for developers.

I've wanted to make this project available to developers using these Node alternatives to help them get past some of WebAuthn's rough spots. Today I'm happy to announce that this goal has been achieved! 😌

See the Changes below for more information, as well as additional information on breaking changes made in this release.

Packages

Changes

  • [server] [typescript-types] SimpleWebAuthn can now also be used in runtimes other than Node. Deno is now a first-class runtime for this project alongside Node (#425)
    • The following list of runtimes are officially supported:
    • The following list of runtimes are periodically tested but unofficially supported:
      • (New) CloudFlare Workers
      • (New) Bun
  • [browser] Version sync

Breaking Changes

  • [server] generateRegistrationOptions() and generateAuthenticationOptions() are now asynchronous methods. Refactor calls to these methods to handle the Promise that's now returned in whatever way is appropriate for your project.
  • [server] generateChallenge() (in @simplewebauthn/server/helpers) is now an asynchronous method. Refactor calls to this method to handle the Promise that's now returned in whatever way is appropriate for your project.

v7.4.0

Packages:

Changes:

  • [browser] [typescript-types] AuthenticatorAttestationResponseJSON now includes additional, optional publicKeyAlgorithm, publicKey, and authenticatorData convenience values that track JSON interface changes in WebAuthn L3 draft (#400)
  • [iso-crypto] Version sync
  • [server] verifyRegistrationResponse() and verifyAuthenticationResponse() now return the matched origin and RP ID in their to output to help RP's that use the same verification logic with multiple origins and RP ID's understand where a response was generated and for which RP (#415)
  • [typescript-types] "smart-card" is now a recognized value for AuthenticatorTransportFuture (#399)

v7.3.1

Packages:

Changes:

  • [server] The AttestationStatement.size property declaration is now more tolerant of older versions of TypeScript
  • [server] Declared minimum supported TypeScript version of 4.4+

v7.3.0

Packages:

Changes:

  • [server] Improved signature verification of the latest FIDO MDS JWTs (#390)

v7.2.0

Packages:

Changes:

  • [server] generateRegistrationOptions() defaults to -8, -7, and -257 for supported public key algorithms (#361)
  • [browser] [iso-webcrypto] [server] Users will no longer need to also npm install @simplewebauthn/typescript-types to pull in type definitions when using these libraries (#370)
  • [browser] Errors raised by startRegistration() and startAuthentication() now include a code property to help programmatically detect identified errors. A new cause property is also populated that will always include the original error raised by the WebAuthn API call (#367)
  • [browser] Aborting conditional UI (i.e. calling startAuthentication(..., true) and then subsequently calling startAuthentication() for modal UI) will now throw an AbortError instead of a string (#371)

v7.1.0

Packages:

Changes:

  • [browser] startRegistration() and startAuthentication() now pass through all NotAllowedError's without trying to interpret what caused them (#353)

v7.0.1

Packages:

Changes:

  • [server] Update dependencies for better deduping in projects using @simplewebauthn/server (#341)
  • [browser] Version sync
  • [iso-webcrypto] Version sync

v7.0.0 - The one that sets the library loose

The highlight of this release is the rearchitecture of @simplewebauthn/server to start allowing it to be used in more environments than Node. This was accomplished by refactoring the library completely away from Node's Buffer type and crypto package, and instead leveraging Uint8Array and the WebCrypto Web API for all cryptographic operations. This means that, hypothetically, this library can now also work in any non-Node environment that provides access to the WebCrypto API on the global crypto object.

Existing Node support is still first-class! In fact because @simplewebauth/server still builds to CommonJS it will continue to be tricky to incorporate the library in non-Node, ESM-only environments that do not support CommonJS modules (whether natively, via a bundler, etc...) A future update will attempt to fix this to offer better support for use in ESM-only projects with support for WebCrypto (e.g. Deno).

Please read all of the changes below! There are significant breaking changes in this update and additional information has been included to help adapt existing projects to the newest version of these libraries.

Packages:

Changes:

  • [server] A new "isomorphic" library architecture allows for use of this library in non-Node environments. In addition, the library now targets Node 16 and above (#299)
  • [server] @simplewebauthn/server/helpers now includes several new helpers for working with WebAuthn-related data types that should work in all run times:
    • isoCBOR for working with CBOR-encoded values
    • isoCrypto for leveraging the WebCrypto API when working with various WebAuthn/FIDO2 data structures
    • isoBase64URL for encoding and decoding values into base64url (with optional base64 support)
    • isoUint8Array for working with Uint8Arrays
    • cose for working with COSE-related methods and types
  • [server] Certificate chains using self-signed X.509 root certificates now validate more reliably (#310)
  • [server] Code execution times for some common use cases are approximately 60-90% faster (#311, #315)
  • [iso-webcrypto] This new library helps @simplewebauthn/server reference the WebCrypto API in more environments than Node. This package is available on NPM, but it is not officially supported for use outside of @simplewebauthn/server!

Breaking Changes

  • [server] The following values returned from verifyRegistrationResponse() are now a Uint8Array instead of a Buffer. They will need to be passed into Buffer.from(...) to convert them to Buffer if needed:
    • aaguid
    • authData
    • clientDataHash
    • credentialID
    • credentialPublicKey
    • rpIdHash
  • [server] The following values returned from verifyAuthenticationResponse() are now a Uint8Array instead of a Buffer. They will need to be passed into Buffer.from(...) to convert them to Buffer if needed:
    • credentialID
  • [server] The isBase64URLString() helper is now isoBase64URL.isBase64url()
  • [server] The decodeCborFirst() helper is now isoCBOR.decodeFirst()
  • [server] The convertPublicKeyToPEM() helper has been removed
  • [typescript-types] [server] [browser] New JSON-serialization-friendly data structures added to the WebAuthn L3 spec have been preemptively mapped into this project. Some types, values, and methods have been refactored or replaced accordingly (#320):
    • The RegistrationCredentialJSON type has been replaced by the RegistrationResponseJSON type
    • The AuthenticationCredentialJSON type has been replaced by the AuthenticationResponseJSON type
    • RegistrationCredentialJSON.transports has been relocated into RegistrationResponseJSON.response.transports to mirror response structure in the WebAuthn spec
    • The verifyRegistrationResponse() method has had its credential argument renamed to response
    • The verifyAuthenticationResponse() method has had its credential argument renamed to response
  • [server] generateRegistrationOptions() now marks user verification as "preferred" during registration and authentication (to reduce some user friction at the browser+authenticator level), and requires user verification during response verification. See below for refactor tips (#307)
Refactor Tips RP's implementing a second-factor flow with WebAuthn, where UV is not important (because username+password are provided before WebAuthn is leveraged for the second factor), should not require user verification when verifying responses:

verifyRegistrationResponse()

Before

const verification = await verifyRegistrationResponse({
  credential: attestationFIDOU2F,
  // ...
});

After

const verification = await verifyRegistrationResponse({
  credential: attestationFIDOU2F,
  // ...
  requireUserVerification: false,
});

verifyAuthenticationResponse()

Before

const verification = await verifyAuthenticationResponse({
  credential: assertionResponse,
  // ...
});

After

const verification = await verifyAuthenticationResponse({
  credential: assertionResponse,
  // ...
  requireUserVerification: false,
});
  • [server] generateRegistrationOptions() now defaults to preferring the creation of discoverable credentials. See below for refactor tips (#324)
Refactor Tips RP's that do not require support for discoverable credentials from authenticators will need to update their calls to `generateRegistrationOptions()` accordingly:

generateRegistrationOptions()

Before

const options = generateRegistrationOptions({
  rpName: 'SimpleWebAuthn',
  rpID: 'simplewebauthn.dev',
  userID: '1234',
  userName: 'usernameHere',
});

After

const options = generateRegistrationOptions({
  rpName: 'SimpleWebAuthn',
  rpID: 'simplewebauthn.dev',
  userID: '1234',
  userName: 'usernameHere',
  authenticatorSelection: {
    // See https://www.w3.org/TR/webauthn-2/#enumdef-residentkeyrequirement
    residentKey: 'discouraged',
  },
});

v6.2.2

Packages:

Changes:

  • [browser] browserSupportsWebAuthnAutofill() no longer supports the old Chrome Canary way of testing for conditional UI support (#298)
  • [server] Version sync

v6.2.1

Packages:

Changes:

  • [browser] Multiple calls to startRegistration() and startAuthentication() will now more reliably cancel the preceding call (#275)
  • [server] Version sync
  • [testing] Version sync
  • [typescript-types] Version sync

v6.2.0

Packages:

Changes:

  • [server] The value of the user verification flag is now returned from verifyAuthenticationResponse() as authenticationInfo.userVerified, similar to how verifyRegistrationResponse() currently returns this value (#263)

v6.1.0

Packages:

Changes:

  • [server] Improve support for requiring resident keys when targeting WebAuthn L1 (#259)
  • [server] Encourage authenticators to produce Ed25519 credential keypairs when supported (#261)

v6.0.0 - The one with Ed25519 Support

This release also marks the return of the library's ability to pass FIDO Conformance! Adding Ed25519 signature verification (see below) finally allowed the library to pass all required tests, and nearly all optional tests.

Packages:

Changes:

  • [server] Signatures can now be verified with OKP public keys that use the Ed25519 curve and EDDSA algorithm (#256)
  • [testing] Version sync
  • [typescript-types] Version sync

Breaking Changes

  • [server] verifyAuthenticationResponse() now returns Promise<VerifiedAuthenticationResponse> instead of VerifiedAuthenticationResponse (#256)

Update your existing calls to verifyAuthenticationResponse() to handle the values resolved by the promises, whether with .then() or await depending on your code structure:

Before:

const verification = verifyAuthenticationResponse({
  // ...
});

After:

const verification = await verifyAuthenticationResponse({
  // ...
});
  • [browser] browserSupportsWebauthn() has been renamed to browserSupportsWebAuthn() (#257)

Update calls to browserSupportsWebauthn() to capitalize the "A" in "WebAuthn":

Before:

if (browserSupportsWebauthn()) {
  // ...
}

After:

if (browserSupportsWebAuthn()) {
  // ...
}

v5.4.5

Packages:

Changes:

  • [server] Support FIDO Conformance user verification requirements (#254)

To leverage these requirements (as might be the case for RP's seeking FIDO certification), update your calls to verifyAuthenticationResponse() to replace requireUserVerification with the new advancedFIDOConfig.userVerification option:

Before:

const verification = verifyAuthenticationResponse({
  // ...
  requireUserVerification: true,
});

After

const verification = verifyAuthenticationResponse({
  // ...
  advancedFIDOConfig: {
    // UserVerificationRequirement: 'required' | 'preferred' | 'discouraged'
    userVerification: 'required',
  },
});

Setting advancedFIDOConfig.userVerification to 'required' will only require the uv flag to be true; up flag may be false. Setting it to 'preferred' or 'discouraged' will allow both up and uv to be false during verification.

  • [server] Rename the devicePublicKey property on the AuthenticationExtensionsAuthenticatorOutputs type to devicePubKey (#243; no one supports this yet so it's not a breaking change)

v5.4.4

Packages:

Changes:

  • [server] Enhance compliance with current FIDO conformance requirements (#249, #251)
  • [server] Minor performance improvements (#150)

v5.4.3

Packages:

Changes:

  • [server] Remove support for the following defunct FIDO metadata authentication algorithms: "rsa_emsa_pkcs1_sha256_raw", "rsa_emsa_pkcs1_sha256_der", "sm2_sm3_raw" (#245)
  • [server] Update remaining FIDO metadata constants to match v2.2 of the FIDO Registry of Predefined Values (#244)

v5.4.2

Packages:

Changes:

  • [server] Add support for "rsa_emsa_pkcs1_sha256_raw" and "rsa_emsa_pkcs1_sha256_der" authentication algorithms in FIDO MDS metadata statements (#241)

v5.4.1

Packages:

Changes:

  • [browser] "type": "module" has been added to package.json to appease modern front end tooling that expects this value to be present when using the ESM build (#237)
  • [server] TPM attestation statement verification now properly verifies statements with ECC public area type (#239)

v5.4.0

Packages:

Changes:

  • [server] verifyRegistrationResponse() and verifyAuthenticationResponse() now return authenticator extension data upon successful verification as the new authenticatorExtensionResults property (#230)
  • [browser] Code quality improvements
  • [typescript-types] Code quality improvements

v5.3.0

Packages:

Changes:

  • [browser] startAuthentication() now accepts a second useBrowserAutofill boolean argument that sets up support for credential selection via a browser's autofill prompt (a.k.a. Conditional UI). The new browserSupportsWebAuthnAutofill() helper method can be used independently to determine when this feature is supported by the browser (#214)
  • [browser] startRegistration() and startAuthentication() will return a new authenticatorAttachment value when present that captures whether a cross-platform or platform authenticator was just used (#221)
  • [typescript-types] A new PublicKeyCredentialFuture interface has been added to define new properties currently defined in the WebAuthn L3 spec draft. These new values support the above new functionality until official TypeScript types are updated accordingly (#214, #221)
  • [typescript-types] A new "hybrid" transport has been added to AuthenticatorTransportFuture while browsers migrate away from the existing "cable" transport for cross-device auth (#222)

v5.2.1

Packages:

Changes:

  • [server] generateRegistrationOptions() and generateAuthenticationOptions() will stop reporting typing errors for definitions of excludeCredentials and allowCredentials that were otherwise fine before v5.2.0 (#203)
  • [typescript-types] The new AuthenticatorTransportFuture and PublicKeyCredentialDescriptorFuture have been added to track changes to WebAuthn that outpace TypeScript's DOM lib typings
  • [browser] Version sync

v5.2.0

Packages:

Changes:

  • [browser, typescript-types] The new "cable" transport is now recognized as a potential value of the AuthenticatorTransport type (#198)
  • [server] verifyRegistrationResponse() and verifyAuthenticationResponse() now return credentialDeviceType and credentialBackedUp within authenticatorInfo as parsed values of two new flags being added to authenticator data. These response verification methods will also now throw an error when the invalid combination of these two flags (credentialDeviceType: "singleDevice", credentialBackedUp: true) is detected (#195)

v5.1.0

Packages:

Changes:

  • [browser] Custom errors raised when calling startRegistration() and startAuthentication() will now have the same name property as the original error (#191)
  • [server] Cleaned up code and added tests (#192, #193)

v5.0.0 The one with more insights

Packages:

Changes:

  • [browser] Most common WebAuthn errors that can occur when calling startRegistration() and startAuthentication() will now return descriptions with more specific insights into what went wrong (#184)
  • [testing] Version sync
  • [typescript-types] Version sync

Breaking Changes

  • [server] The fidoUserVerification argument to verifyAuthenticationResponse() has been replaced with the simpler requireUserVerification boolean (#181)

Previous values of "required" should specify true for this new argument; previous values of "preferred" or "discouraged" should specify false:

Before:

const verification = verifyAuthenticationResponse({
  // ...snip...
  fidoUserVerification: 'required',
});

After:

const verification = verifyAuthenticationResponse({
  // ...snip...
  requireUserVerification: true,
});

v4.4.0

Packages:

Changes:

  • [server] Attestation statement verification involving FIDO metadata now correctly validates the credential public keypair algorithm against possible algorithms defined in the metadata statement.
  • [server] The expired GlobalSign R2 root certificate for "android-safetynet" responses has been removed
  • [server] Certificate path validation errors will now identify which part of the chain and which certificate has an issue
  • [server] verifyAuthenticationResponse()'s expectedChallenge argument also accepts a function that accepts a Base64URL string and returns a boolean to run custom logic against the clientDataJSON.challenge returned by the authenticator (see v4.3.0 release notes for more info).

v4.3.0

Packages:

Changes:

  • [server] The expectedChallenge argument passed to verifyRegistrationResponse() can now be a function that accepts a Base64URL string and returns a boolean to run custom logic against the clientDataJSON.challenge returned by the authenticator. This allows for arbitrary data to be included in the challenge so it can be signed by the authenticator.

After generating registration options, the challenge can be augmented with additional data:

const options = generateRegistrationOptions(opts);

// Remember the plain challenge
inMemoryUserDeviceDB[loggedInUserId].currentChallenge = options.challenge;

// Add data to be signed
options.challenge = base64url(JSON.stringify({
  actualChallenge: options.challenge,
  arbitraryData: 'arbitraryDataForSigning',
}));

Then, when invoking verifyRegistrationResponse(), pass in a method for expectedChallenge to parse the challenge and return a boolean:

const expectedChallenge = inMemoryUserDeviceDB[loggedInUserId].currentChallenge;

const verification = await verifyRegistrationResponse({
  expectedChallenge: (challenge: string) => {
    const parsedChallenge = JSON.parse(base64url.decode(challenge));
    return parsedChallenge.actualChallenge === expectedChallenge;
  },
  // ...
});

To retrieve the arbitrary data afterwards, use decodeClientDataJSON() afterwards to get it out:

import { decodeClientDataJSON } from '@simplewebauthn/server/helpers';

const { challenge } = decodeClientDataJSON(response.clientDataJSON);
const parsedChallenge = JSON.parse(base64url.decode(challenge));
console.log(parsedChallenge.arbitraryData); // 'arbitraryDataForSigning'

v4.2.0

Packages:

Changes:

  • [server] The debug library has been incorporated to support logging output from the library's internal operations. Add the following environment variable to your application to view this output when using this library:
DEBUG=SimpleWebAuthn:*

The following logging scopes are defined in this release:

SimpleWebAuthn:MetadataService

See PR #159 for a preview of logging output.

v4.1.0

Packages:

Changes:

  • [browser] platformAuthenticatorIsAvailable() now checks that WebAuthn is supported at all before attempting to query for the status of an available platform authenticator.
  • [server] MetadataService.initialize() gained a new verificationMode option that can be set to "permissive" to allow registration response verification to continue when an unregistered AAGUID is encountered. Default behavior, that fails registration response verification, is represented by the alternative value "strict"; MetadataService continues to default to this more restrictive behavior.

v4.0.0 - The one with some new names

A lot has happened to me since I first launched SimpleWebAuthn back in May 2020. My understanding of WebAuthn has grown by leaps and bounds thanks in part to my representing Duo/Cisco in the W3C's WebAuth Adoption Working Group. I'm now in a point in my life in which it's no longer sufficient to think, "what's in SimpleWebAuthn's best interests?" Now, I have an opportunity to think bigger - "what's in the WebAuthn API's best interests?"

While early on I thought "attestation" and "assertion" were important names to WebAuthn, I've since come to better appreciate the spec's efforts to encourage the use of "registration" and "authentication" instead. To that end I decided it was time to rename all of the project's various public methods and types to get as much as possible to use "registration" and "authentication" instead.

This release is one of the more disruptive because it affects everyone who's used SimpleWebAuthn to date. The good news is that, while method and type names have changed, their capabilities remain the same. Updating your code to this version of SimpleWebAuthn should only involve renaming existing method calls and type annotations.

Please take the time to read the entire changelog for this release! There are a handful of new features also included that users with advanced use cases will find helpful. The simple use cases of the library remain unchanged - most new features are for power users who require extra scrutiny of authenticators that interact with their website and are otherwise opt-in as needed.

Packages:

Changes:

  • [browser] A new (asynchronous) helper method platformAuthenticatorIsAvailable() has been added for detecting when hardware-bound authenticators like Touch ID, Windows Hello, etc... are available for use. More info is available here.
  • [server] The new SettingsService can be used to configure aspects of SimpleWebAuthn like root certs for enhanced registration response verification or for validating FIDO MDS BLOBs with MetadataService. More info is available here.
  • [server] Known root certificates for the following attestation formats have been updated: 'android-key', 'android-safetynet', 'apple'
  • [server] A wide range of internal helper methods are now exported from '@simplewebauthn/server/helpers' (not a new package, but a subpath.) These methods can be used, for example, to process non-standard responses that are not officially part of the WebAuthn spec and thus unlikely to ever be supported by SimpleWebAuthn.
  • [server] MetadataService now supports FIDO Alliance Metadata Service version 3.0.

Breaking Changes

  • [browser, server, typescript-types] All methods and types that included "attestation" in the name have been renamed to use "registration" instead
  • [browser, server, typescript-types] All methods and types that included "assertion" in the name have been renamed to use "authentication" instead.

The quickest way to update your code is to try changing "attestation" to "registration" and "assertion" to "authentication" in the name of whatever method or type is no longer working and see if that fixes it (exceptions to this rule are called out with asterisks below.) If it doesn't, check out PR #147 to see all of the renamed methods and types and try to cross-reference the original to see what it was renamed to.

Examples:

  • generateAttestationOptions() -> generateRegistrationOptions()
  • GenerateAttestationOptionsOpts -> GenerateRegistrationOptionsOpts
  • verifyAssertionResponse() -> verifyAuthenticationResponse()
  • VerifiedAttestation -> VerifiedRegistrationResponse (*)
  • VerifiedAssertion -> VerifiedAuthenticationResponse (*)
  • startAttestation() -> startRegistration()
  • startAssertion() -> startAuthentication()

These examples are not a comprehensive list of all the renamed methods! Rather these are examples of how method names were changed to try and eliminate "attestation" and "assertion" from the public API of both @simplewebauthn/browser and @simplewebauthn/server.

  • [server] The opts argument for MetadataService.initialize() is now optional.
  • [server] The opts.mdsServers argument for MetadataService.initialize(opts) is now a simple array of URL strings to FIDO Alliance MDSv3-compatible servers. If no value is specified then MetadataService will query the official FIDO Alliance Metadata Service version 3.0.

See here for more information about the updated MetadataService.

  • [browser] supportsWebAuthn() has been renamed to browserSupportsWebAuthn() in an effort to make the method convey a clearer idea of what supports WebAuthn.

v3.1.0

Packages:

Changes:

  • [browser] The ES2018 bundle is now "main" in package.json. The tslib dependency for production is no longer necessary as transpilation to ES5 is now fully the responsibility of the framework implementing @simplewebauthn/browser.
    • The ES5 UMD build remains available for websites not leveraging a build pipeline.
  • [browser] Linking to this package via unpkg now defaults to the ES2018 build. See browser's README.md for information on how to link to the ES5 build instead.

v3.0.0 - The one with a legacy

This release is focused on updating @simplewebauthn/browser for better browser support out of the box. Most projects will now pull in its (slightly larger) ES5 bundle to ensure maximum browser compatibility, including older browsers in which WebAuthn will never be available. The ES2018 build is still available for projects that only need to target newer browsers, but bundler configuration changes must now be made to include it instead of the ES5 build.

Packages:

Changes:

  • [browser] Set default bundle to ES5 to support IE10+ and Edge Legacy
  • [browser] startAssertion() no longer Base64URL-encodes userHandle string
  • [server] Fix issue with Chrome (< v90) WebAuthn virtual authenticators
  • [server] Update jsrsasign to 10.2.0 (see GHSA-27fj-mc8w-j9wg)
  • [typescript-types] Update assertion JSON declarations as per startAssertion() fix

Breaking Changes

  • [browser] Projects targeting modern browsers may not wish to bundle the ES5 version due to its inclusion of various polyfills. See the updated "Building for Production" section of the README.md for more info on how to pull in the ES2018 version instead.
  • [browser] RPs with usernameless flows will no longer need to Base64URL-decode response.userHandle as returned from startAssertion().

v2.2.1

Packages:

Changes:

  • [browser] Adds support for older browsers (IE10/IE11, Edge Legacy, etc...) with additional build artifacts targeting ES5
    • See updated "Installation" and "Building for Production" sections of the README.md
  • [server] Internal code cleanup

v2.2.0

Packages:

Changes:

  • [server] Export more TypeScript types for options and verification method inputs and outputs:
// Newly exported types
import type {
  GenerateAssertionOptionsOpts,
  GenerateAttestationOptionsOpts,
  VerifiedAssertion,
  VerifiedAttestation,
  VerifyAssertionResponseOpts,
  VerifyAttestationResponseOpts,
} from '@simplewebauthn/server';

v2.1.0

Packages:

Changes:

  • [browser] startAttestation() and startAssertion() now include extension results as clientExtensionResults in their return value
  • [typescript-types] Updated PublicKeyCredentialCreationOptionsJSON and PublicKeyCredentialRequestOptionsJSON types with new optional extensions property to support specifying WebAuthn extensions when calling generateAttestationOptions() and generateAssertionOptions()
  • [typescript-types] Updated AttestationCredentialJSON and AssertionCredentialJSON types with new clientExtensionResults properties to contain output from WebAuthn's credential.getClientExtensionResults()
  • [server] Version sync

v2.0.0 - The one with -less and more Buffers

This major release includes improvements intended to make it easier to support passwordless and usernameless WebAuthn flows. Additional information returned from attestation verification can be used by RP's to further scrutinize the attestation now or in the future.

I also made the decision to reduce the amount of encoding from Buffer to Base64URL and decoding from Base64URL to Buffer throughout the library. Verification methods now return raw Buffers so that RP's are free to store and retrieve these values as they see fit without the library imposing any kind of encoding overhead that may complicate storage in a database, etc...

Packages:

Changes:

  • [server] See Breaking Changes below.
  • [typescript-types] See Breaking Changes below
  • [browser] Version sync
  • [testing] Version sync

Breaking Changes

  • [server] The method verifyAttestationResponse() now returns a different data structure with additional information that RP's can use to more easily support passwordless and usernameless WebAuthn flows.
    • Additionally, Buffer values are now returned in place of previously-base64url-encoded values. This is intended to offer more flexibility in how these values are persisted without imposing an encoding scheme that may introduce undesirable overhead.

Before:

type VerifiedAttestation = {
  verified: boolean;
  userVerified: boolean;
  authenticatorInfo?: {
    fmt: ATTESTATION_FORMAT;
    counter: number;
    base64PublicKey: string;
    base64CredentialID: string;
  };
};

After:

type VerifiedAttestation = {
  verified: boolean;
  attestationInfo?: {
    fmt: ATTESTATION_FORMAT;
    counter: number;
    aaguid: string;
    credentialPublicKey: Buffer;
    credentialID: Buffer;
    credentialType: string;
    userVerified: boolean;
    attestationObject: Buffer;
  };
};
  • [server] The method verifyAssertionResponse() now returns a different data structure to align with changes made to verifyAttestationResponse().

Before:

type VerifiedAssertion = {
  verified: boolean;
  authenticatorInfo: {
    counter: number;
    base64CredentialID: string;
  };
};

After:

type VerifiedAssertion = {
  verified: boolean;
  assertionInfo: {
    credentialID: Buffer;
    newCounter: number;
  };
};
  • [server] The excludeCredentials argument in generateAttestationOptions() now expects a Buffer type for a credential's id property. Previously id needed to be a string. Existing credential IDs stored in base64url encoding can be easily converted to Buffer with a library like base64url:

Before:

const options = generateAttestationOptions({
  // ...
  excludeCredentials: [{
    id: 'PPa1spYTB680cQq5q6qBtFuPLLdG1FQ73EastkT8n0o',
    // ...
  }],
  // ...
});

After:

const options = generateAttestationOptions({
  // ...
  excludeCredentials: [{
    id: base64url.toBuffer('PPa1spYTB680cQq5q6qBtFuPLLdG1FQ73EastkT8n0o'),
    // ...
  }],
  // ...
});
  • [server] The allowCredentials argument in generateAssertionOptions() now expects a Buffer type for a credential's id property. Previously id needed to be a string. Existing credential IDs stored in base64url encoding can be easily converted to Buffer with a library like base64url:

Before:

const options = generateAssertionOptions({
  // ...
  allowCredentials: [{
    id: 'PPa1spYTB680cQq5q6qBtFuPLLdG1FQ73EastkT8n0o',
    // ...
  }],
  // ...
});

After:

const options = generateAssertionOptions({
  // ...
  allowCredentials: [{
    id: base64url.toBuffer('PPa1spYTB680cQq5q6qBtFuPLLdG1FQ73EastkT8n0o'),
    // ...
  }],
  // ...
});
  • [typescript-types] The AuthenticatorDevice type has been updated to expect Buffer's for credential data. Naming of its properties have also been updated to help maintain consistency with naming in the WebAuthn spec:

Before:

type AuthenticatorDevice = {
  publicKey: Base64URLString;
  credentialID: Base64URLString;
  counter: number;
  transports?: AuthenticatorTransport[];
};

After:

type AuthenticatorDevice = {
  credentialPublicKey: Buffer;
  credentialID: Buffer;
  counter: number;
  transports?: AuthenticatorTransport[];
};

v1.0.0 - The one that gets things out of "Beta"

Packages:

Changes:

  • [server] Add support for multiple expected origins and RP IDs in verifyAttestationResponse() and verifyAssertionResponse()
  • [server] Update generateAttestationOptions() to force legacy authenticatorSelection.requireResidentKey to true when authenticatorSelection.residentKey is "required" (as per L2 of the WebAuthn spec)
  • [typescript-types] Update AuthenticatorDevice type with optional transports property
  • [browser] Version sync
  • [testing] Version sync

Breaking Changes

There are no breaking changes in this release. Several recent minor changes presented an opportunity to release a "v1.0". I'd received enough positive feedback about SimpleWebAuthn and noticed growing usage which granted me the confidence to take advantage of this opportunity.

And perhaps this will give the project more legitimacy in the eyes of larger organizations wishing to use it but waiting for the libraries to "get out of beta"...

v0.10.6

Packages:

Changes:

  • [browser] Refactor toUint8Array() for easier testing when integrated
  • [server] Fix an unexpected build issue
  • [testing] Publish package (stub)

v0.10.5

Packages:

Changes:

  • [server] Make allowCredentials in generateAssertionOptions() optional
  • [server] Support calling generateAssertionOptions() without any options
  • [browser] Ignore "empty" values for allowCredentials before starting assertion
  • [typescript-types] Unpin dependency versions

v0.10.4

Packages:

Changes:

  • [server] Unpin dependency versions
  • [server] Upgrade dependencies and devDependencies
  • [typescript-types] Pull in TypeScript DOM lib types on build
  • [docs] Upgrade TypeDoc for better API docs

v0.10.3

Packages:

Changes:

  • [server] Add optional rpID argument to generateAssertionOptions()

v0.10.2

Packages:

Changes:

  • [server] Update ASN.1 parsing libraries to latest releases

v0.10.1

Packages:

Changes:

  • [server] Pin third-party package versions

v0.10.0 - The one you can use your face with

Packages:

Changes:

  • [server] Add support for "apple" attestations to support iOS Face ID and Touch ID
  • [server] [browser] Enable specifying transports per credential for allowCredentials and excludeCredentials
  • [browser] Return authenticator's transports (when available) as transports in response from startAttestation()
  • [typescript-types] Add new AuthenticatorAttestationResponseFuture type for better typing of credential response methods (getTransports(), getAuthenticatorData(), etc...)

Breaking Changes

  • [server] Existing implementations of generateAttestationOptions() and generateAssertionOptions() must be updated to specify credentials with their own transports:

generateAttestationOptions()

// OLD
const options = generateAttestationOptions({
  excludedCredentialIDs: devices.map((dev) => dev.credentialID),
  suggestedTransports: ['usb', 'ble', 'nfc', 'internal'],
});

// NEW
const options = generateAttestationOptions({
  excludeCredentials: devices.map((dev) => ({
    id: dev.credentialID,
    type: 'public-key',
    transports: dev.transports,
  })),
});

generateAssertionOptions()

// OLD
const options = generateAssertionOptions({
  allowedCredentialIDs: user.devices.map((dev) => dev.credentialID),
  suggestedTransports: ['usb', 'ble', 'nfc', 'internal'],
});

// NEW
const options = generateAssertionOptions({
  allowCredentials: devices.map((dev) => ({
    id: dev.credentialID,
    type: 'public-key',
    transports: dev.transports,
  })),
});

v0.9.1

Packages:

Changes:

  • [server] Third-party package security update

v0.9.0 - The one that knows RSA from EC2

Packages:

Changes:

  • [server] Add support for attestations and assertions containing RSA public keys.
  • [browser] Version sync.
  • [typescript-types] Version sync.

Breaking Changes

  • [server] authenticatorInfo.base64PublicKey returned by verifyAttestationResponse() is now the entire public key buffer instead of a pared down form of it (it's still returned base64url-encoded). This helps ensure support for existing public keys, as well as future public key formats that may be introduced in the future. Public keys previously returned by this method must be upgraded via this "upgrader" script to work with future assertions.
  • [server] The serviceName argument for generateAttestationOptions() has been renamed to rpName. This brings it in line with the existing rpID argument and maps more obviously to its respective property within the returned options.

v0.8.2

Packages:

Changes:

  • [server] Return explicit defaults for authenticatorSelection in return value from generateAttestationOptions() for enhanced device compatibility.
  • [browser] Version sync.
  • [typescript-types] Version sync.

v0.8.1

Packages:

Changes:

  • [server] Stop filtering out algorithm ID's from supportedAlgorithmIDs when calling generateAttestationOptions()
  • [server] Fix a bug when verifying TPM attestation extensions

v0.8.0 - The one with better challenges

Packages:

Changes:

  • [server] The challenge parameter of generateAttestationOptions() and generateAssertionOptions() is now optional.
    • When undefined the library will generate a random challenge. This value will be base64url-encoded in preparation for transit to the front end.
    • When defined the value will be directly encoded to base64url in preparation for transit to the front end.
  • [browser] startAttestation() and startAssertion() now convert the base64url-encoded options.challenge to a buffer before passing it to the authenticator.

Breaking Changes

  • [server] verifyAttestationResponse() and verifyAssertionResponse() now require the base64url-encoded challenge to be passed in as expectedChallenge:

Before:

const challenge = 'someChallenge';

const opts = generateAttestationOptions({
  ...atteOpts,
  challenge,
});

const verification = verifyAttestationResponse({
  ...atteResp,
  // Raw original value
  expectedChallenge: challenge,
});

After:

const challenge = 'someChallenge';

const opts = generateAttestationOptions({
  ...atteOpts,
  // This is now optional
  challenge,
});

const verification = verifyAttestationResponse({
  ...atteResp,
  // Now expected to be the base64url-encoded `challenge` returned
  // by `generateAttestationOptions()`
  expectedChallenge: opts.challenge,
});

v0.7.4

Packages:

Changes:

  • [browser] Update dependencies
  • [server] Update dependencies

v0.7.3

Packages:

Changes:

  • [browser] Add support for UTF-8 values in server challenges
  • [server] Minor performance improvement

v0.7.2

Packages:

Changes:

  • [server] Added support for specifying a custom array of COSE algorithm identifiers when calling generateAttestationOptions() and verifyAttestationResponse()
  • [browser] Updated README.md with new doc URLs

v0.7.1

Packages:

Changes:

  • Fixed broken README and Homepage links in package listings on NPMJS.com

v0.7.0 - The one that passes FIDO conformance testing

Packages:

Changes:

  • [server] Add support for TPM attestations
  • [server] Add support for Android Key attestations
  • [server] Add support for authenticator metadata statements and the FIDO Metadata Service (MDS)

Breaking Changes

  • [server] The return type of verifyAttestationResponse() changed from boolean to Promise<boolean>. This was necessary to support querying FIDO MDS for an authenticator metadata statement during attestation verification.
  • [server] The optional requireUserVerification parameter of verifyAssertionResponse() has been replaced with the new optional fidoUserVerification parameter. This enables greater control over user verification when verifying assertions.

v0.6.1

Packages:

Changes:

  • [typescript-types] Update verifyAttestationResponse() options param description.

v0.6.0 - The one with better response verification

Packages:

Changes:

  • [server] (BREAKING) Server's verifyAttestationResponse() and verifyAssertionResponse() methods now take a single arguments object.
  • [server] These methods now include the ability to require user verification during attestation and assertion verification via the new requireUserVerification argument.

v0.5.1

Packages:

Changes:

  • [typescript-types] Re-export AuthenticatorAttestationResponseJSON and AuthenticatorAssertionResponseJSON

v0.5.0 - The one where browser returns more info

Packages:

Changes:

  • [browser] (BREAKING) Refactor startAttestation() and startAssertion() to return more of the output from the navigator.credentials calls
  • [browser] Replace base64-js dependency with internal functionality
  • [browser, server] Standardize on use of Base64URL encoding when converting to and from JSON
  • [server] (BREAKING) Remove references to "base64" from generateAttestationOptions() and generateAssertionOptions() by renaming the excludedBase64CredentialIDs and allowedBase64CredentialIDs to excludedCredentialIDs and allowedCredentialIDs respectively
  • [typescript-types] (BREAKING) Migrate some non-shared typings into server