This is a platform agnostic Rust driver for the MCP9808, based on the
embedded-hal traits.
The MCP9808 digital temperature sensor converts temperatures between -20°C and +100°C to a digital word with ±0.5°C (max.) accuracy.
The device has an I²C interface and user-selectable settings such as Shutdown or low-power modes and the specification of temperature Event and Critical output boundaries.
Details and datasheet: http://www.microchip.com/wwwproducts/en/en556182
Feature complete, but needs more testing.
- temperature register
- configuration register
- resolution register
- manufacturer ID and device ID
- temperature alert upper & lower
- critical temperature
Assuming you have a reference to the HAL's I2C bus:
let mut mcp9808 = MCP9808::new(i2c);
// how to read & write register
let mut conf = mcp9808.read_configuration().unwrap();
conf.set_shutdown_mode(ShutdownMode::Shutdown);
let _c = mcp9808.write_register(conf);
// read temperature register
let temp = mcp9808.read_temperature().unwrap();
temp.get_celsius(ResolutionVal::Deg_0_0625C)
Licensed under either of
- Apache License, Version 2.0 (LICENSE-APACHE or http://www.apache.org/licenses/LICENSE-2.0)
- MIT license (LICENSE-MIT or http://opensource.org/licenses/MIT) at your option.
Unless you explicitly state otherwise, any contribution intentionally submitted for inclusion in the work by you, as defined in the Apache-2.0 license, shall be dual licensed as above, without any additional terms or conditions.