Using prebuilt linuxsdk docker image #8

fanghuaqi · 2022-11-03T06:33:56Z

We have prepared a linuxsdk docker image located in https://hub.docker.com/repository/docker/nucleisoftware/linuxsdk, you can use the docker image there, if you don't want to step the environment by yourself.

If you don't want to use docker, please following #4 to download code

The following branches are enabled with docker support:
Available tags: https://hub.docker.com/repository/docker/nucleisoftware/linuxsdk/tags

dev_nuclei_next: nucleisoftware/linuxsdk:ci , later on it will be nucleisoftware/linuxsdk:dev_nuclei_next

dev_nuclei_5.10/dev_nuclei_5.10_v2/dev_nuclei_6.1/dev_nuclei_6.1_v2/dev_nuclei_6.6_v2: docker tag is the branch name, eg. for branch dev_nuclei_5.10, the docker image is nucleisoftware/linuxsdk:dev_nuclei_5.10

NOTE For evaluating optee, see #13 , this docker image is uploaded by @fanghuaqi manually, not ci generated.

Recommended docker tags: dev_nuclei_5.10_v2, dev_nuclei_6.1_v2, dev_nuclei_6.6_v2

NOTE: not work for upload freeloader, you need to copy the freeloader to out side of docker, and program to flash using openocd and gdb by yourself, see https://github.com/Nuclei-Software/nuclei-linux-sdk/wiki/Program-freeloader

Sample steps:

Make sure your docker is installed in your linux environment, see https://docs.docker.com/engine/install/ubuntu/
Make sure you have good connection to docker hub, otherwise use mirror of docker hub, search it by yourself
Use the docker image of linux sdk

# In Host
## if using docker hub mirror from dockerpull.org , you can run like this
# docker run -it dockerpull.org/nucleisoftware/linuxsdk:dev_nuclei_5.10_v2
# Here below just pull docker from official docker hub
docker run -it nucleisoftware/linuxsdk:dev_nuclei_5.10_v2
# In docker now, user/pwd: nuclei/riscv123
cd nuclei-linux-sdk
# build project just follow https://github.com/Nuclei-Software/nuclei-linux-sdk#show-help
# this linux sdk repo cloned in this docker image is not full clone
# if you want to update source code or checkout different branch, do it as you like

The text was updated successfully, but these errors were encountered:

fanghuaqi · 2022-11-03T06:35:42Z

In this docker image, SOC=demosoc CORE=ux600 is default prebuilt with freeloader and bootimages, you can directly use it, Nuclei QEMU is also installed, but Nuclei OpenOCD is not installed.

2023.11.24 -> For latest image, it use the default config in Makefile.

- #4 - #8

Not tested with dma device, only test boot with bit ux900_best_config_8c_vcu118_50M_a865d7fa5_ae96c6e3b_202306121521.bit OpenSBI v0.9 ____ _____ ____ _____ / __ \ / ____| _ \_ _| | | | |_ __ ___ _ __ | (___ | |_) || | | | | | '_ \ / _ \ '_ \ \___ \| _ < | | | |__| | |_) | __/ | | |____) | |_) || |_ \____/| .__/ \___|_| |_|_____/|____/_____| | | |_| Platform Name : Nuclei Evaluation SoC Platform Features : timer,mfdeleg Platform HART Count : 8 Firmware Base : 0xa0000000 Firmware Size : 156 KB Runtime SBI Version : 0.2 Domain0 Name : root Domain0 Boot HART : 0 Domain0 HARTs : 0*,1*,2*,3*,4*,5*,6*,7* Domain0 Region00 : 0x00000000a0000000-0x00000000a003ffff () Domain0 Region01 : 0x0000000000000000-0xffffffffffffffff (R,W,X) Domain0 Next Address : 0x00000000a0200000 Domain0 Next Arg1 : 0x00000000a8000000 Domain0 Next Mode : S-mode Domain0 SysReset : yes Boot HART ID : 0 Boot HART Domain : root Boot HART ISA : rv64imafdcbsu Boot HART Features : scounteren,mcounteren,time Boot HART PMP Count : 16 Boot HART PMP Granularity : 4096 Boot HART PMP Address Bits: 30 Boot HART MHPM Count : 0 Boot HART MHPM Count : 0 Boot HART MIDELEG : 0x0000000000000222 Boot HART MEDELEG : 0x000000000000b109 U-Boot 2021.01-00019-gb9162c6c8f (Jun 26 2023 - 10:38:33 +0800) CPU: rv64imafdc Model: nuclei,evalsoc DRAM: 1.5 GiB Board: Initialized MMC: Nuclei SPI version 0xee010102 spi@10034000:mmc@0: 0 In: serial@10013000 Out: serial@10013000 Err: serial@10013000 Net: No ethernet found. Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... Found U-Boot script /boot.scr 725 bytes read in 319 ms (2 KiB/s) Boot images located in . Loading kernel: ./uImage.lz4 3988041 bytes read in 18370 ms (211.9 KiB/s) Loading ramdisk: ./uInitrd.lz4 5487300 bytes read in 25156 ms (212.9 KiB/s) ./kernel.dtb not found, ignore it Starts booting from SD Image Name: Linux Image Type: RISC-V Linux Kernel Image (lz4 compressed) Data Size: 3987977 Bytes = 3.8 MiB Load Address: a0400000 Entry Point: a0400000 Verifying Checksum ... OK Image Name: Initrd Image Type: RISC-V Linux RAMDisk Image (lz4 compressed) Data Size: 5487236 Bytes = 5.2 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Booting using the fdt blob at 0xa8000000 Uncompressing Kernel Image Using Device Tree in place at 00000000a8000000, end 00000000a80046f9 Starting kernel ... [ 0.000000] Linux version 5.10.0+ ([email protected]) (riscv-nuclei-linux-gnu-gcc (GCC) 10.2.0, GNU ld (GNU Binutils) 2.36.1) #8 SMP Wed Ju3 [ 0.000000] OF: fdt: Ignoring memory range 0xa0000000 - 0xa0400000 [ 0.000000] earlycon: sbi0 at I/O port 0x0 (options '') [ 0.000000] printk: bootconsole [sbi0] enabled [ 0.000000] efi: UEFI not found. [ 0.000000] Initial ramdisk at: 0x(____ptrval____) (5488640 bytes) [ 0.000000] Zone ranges: [ 0.000000] DMA32 [mem 0x00000000a0400000-0x00000000fdffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00000000a0400000-0x00000000fdffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000a0400000-0x00000000fdffffff] [ 0.000000] software IO TLB: mapped [mem 0x00000000f8b75000-0x00000000fcb75000] (64MB) [ 0.000000] SBI specification v0.2 detected [ 0.000000] SBI implementation ID=0x1 Version=0x9 [ 0.000000] SBI v0.2 TIME extension detected [ 0.000000] SBI v0.2 IPI extension detected [ 0.000000] SBI v0.2 RFENCE extension detected [ 0.000000] SBI v0.2 HSM extension detected [ 0.000000] riscv: ISA extensions acdfim [ 0.000000] riscv: ELF capabilities acdfim [ 0.000000] ccm-block-size for hart 0 is 64 bytes [ 0.000000] ccm-block-size for hart 1 is 64 bytes [ 0.000000] ccm-block-size for hart 2 is 64 bytes [ 0.000000] ccm-block-size for hart 3 is 64 bytes [ 0.000000] ccm-block-size for hart 4 is 64 bytes [ 0.000000] ccm-block-size for hart 5 is 64 bytes [ 0.000000] ccm-block-size for hart 6 is 64 bytes [ 0.000000] ccm-block-size for hart 7 is 64 bytes [ 0.000000] percpu: Embedded 16 pages/cpu s25112 r8192 d32232 u65536 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 378750 [ 0.000000] Kernel command line: earlycon=sbi console=ttyNUC0 [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.000000] Sorting __ex_table... [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 1426756K/1536000K available (4680K kernel code, 4170K rwdata, 2048K rodata, 188K init, 328K bss, 109244K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] riscv-intc: 64 local interrupts mapped [ 0.000000] plic: interrupt-controller@1c000000: mapped 53 interrupts with 8 handlers for 16 contexts. [ 0.000000] random: get_random_bytes called from 0xffffffe00000296a with crng_init=0 [ 0.000000] riscv_timer_init_dt: Registering clocksource cpuid [0] hartid [0] [ 0.000000] clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x1ef4687b1, max_idle_ns: 112843571739654 ns [ 0.000091] sched_clock: 64 bits at 32kHz, resolution 30517ns, wraps every 70368744171142ns [ 0.009552] Calibrating delay loop (skipped), value calculated using timer frequency.. 0.06 BogoMIPS (lpj=327) [ 0.019287] pid_max: default: 32768 minimum: 301 [ 0.026458] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.034271] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.064056] rcu: Hierarchical SRCU implementation. [ 0.070983] EFI services will not be available. [ 0.082244] smp: Bringing up secondary CPUs ... [ 0.169860] smp: Brought up 1 node, 8 CPUs [ 0.182922] devtmpfs: initialized [ 0.208374] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.218017] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.229919] pinctrl core: initialized pinctrl subsystem [ 0.239105] NET: Registered protocol family 16 [ 0.249542] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations [ 0.260681] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.402984] clocksource: Switched to clocksource riscv_clocksource [ 0.423797] NET: Registered protocol family 2 [ 0.439056] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear) [ 0.448089] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.460571] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear) [ 0.476745] TCP: Hash tables configured (established 16384 bind 16384) [ 0.487182] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear) [ 0.494995] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear) [ 0.505981] NET: Registered protocol family 1 [ 0.516571] RPC: Registered named UNIX socket transport module. [ 0.521942] RPC: Registered udp transport module. [ 0.526916] RPC: Registered tcp transport module. [ 0.531463] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.540344] Trying to unpack rootfs image as initramfs... [ 4.281127] Freeing initrd memory: 5352K [ 4.295257] workingset: timestamp_bits=62 max_order=19 bucket_order=0 [ 4.378204] jffs2: version 2.2. (NAND) 2001-2006 Red Hat, Inc. [ 4.390380] JFS: nTxBlock = 8192, nTxLock = 65536 [ 5.575775] NET: Registered protocol family 38 [ 5.579864] io scheduler mq-deadline registered [ 5.584503] io scheduler kyber registered [ 6.147094] 10013000.serial: ttyNUC0 at MMIO 0x10013000 (irq = 1, base_baud = 3125000) is a Nuclei UART/USART [ 6.156890] printk: console [ttyNUC0] enabled [ 6.156890] printk: console [ttyNUC0] enabled [ 6.165344] printk: bootconsole [sbi0] disabled [ 6.165344] printk: bootconsole [sbi0] disabled [ 6.293090] brd: module loaded [ 6.401885] loop: module loaded [ 6.408660] nuclei_spi 10014000.spi: mapped; irq=2, cs=4 [ 6.420745] spi-nor spi0.0: w25q128 (16384 Kbytes) [ 6.474884] random: fast init done [ 7.360473] ftl_cs: FTL header not found. [ 7.374755] nuclei_spi 10034000.spi: mapped; irq=4, cs=4 [ 7.423553] mmc_spi spi1.0: SD/MMC host mmc0, no DMA, no WP, no poweroff, cd polling [ 7.436187] ipip: IPv4 and MPLS over IPv4 tunneling driver [ 7.454040] NET: Registered protocol family 10 [ 7.471221] Segment Routing with IPv6 [ 7.475402] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 7.488555] NET: Registered protocol family 17 [ 7.509246] Freeing unused kernel memory: 188K [ 7.535247] Run /init as init process [ 7.596862] mmc0: host does not support reading read-only switch, assuming write-enable [ 7.604522] mmc0: new SDHC card on SPI [ 7.623382] mmcblk0: mmc0:0000 SD32G 29.7 GiB [ 7.678588] mmcblk0: p1 Starting syslogd: OK Starting klogd: OK Running sysctl: OK Starting mdev... OK modprobe: can't change directory to '/lib/modules': No such file or directory Saving random seed: [ 13.721649] random: dd: uninitialized urandom read (512 bytes read) OK Welcome to Nuclei System Technology nucleisys login: root Password: processor : 0 hart : 0 isa : rv64imafdc mmu : sv39 processor : 1 hart : 1 isa : rv64imafdc mmu : sv39 processor : 2 hart : 2 isa : rv64imafdc mmu : sv39 processor : 3 hart : 3 isa : rv64imafdc mmu : sv39 processor : 4 hart : 4 isa : rv64imafdc mmu : sv39 processor : 5 hart : 5 isa : rv64imafdc mmu : sv39 processor : 6 hart : 6 isa : rv64imafdc mmu : sv39 processor : 7 hart : 7 isa : rv64imafdc mmu : sv39 Signed-off-by: Huaqi Fang <[email protected]>

fanghuaqi · 2023-11-23T03:13:15Z

Since 2023.11.23, branch dev_nuclei_5.10/dev_nuclei_5.10_v2/dev_nuclei_6.1/dev_nuclei_6.1_v2 are enabled with docker image support, docker tag is the branch name, eg. for branch dev_nuclei_5.10, the docker image is nucleisoftware/linuxsdk:dev_nuclei_5.10

fanghuaqi · 2023-11-27T01:54:06Z

Since 2023.11.27, the prebuilt docker image(ci generated) for branch dev_nuclei_5.10/dev_nuclei_5.10_v2/dev_nuclei_6.1/dev_nuclei_6.1_v2/dev_nuclei_next size decreased from near 8G to about 2G, this decrease is caused by the linux sdk source code in these images are shallow cloned(with --depth 10), if you want to pull the complete source code, you need to run git fetch --unshallow, but it will cost time and may fail depending on your network to github.

Note: now in these images, gitee remote is remoted due to gitee mirror is now not working, see #10 (comment)

fanghuaqi · 2023-12-20T03:17:28Z

Since 2023.12.20, the prebuilt docker image(ci generated) for branch dev_nuclei_6.6_v2 using gcc13 is pushed to https://hub.docker.com/r/nucleisoftware/linuxsdk , tag dev_nuclei_6.6_v2

fanghuaqi · 2023-12-22T12:41:27Z

Docker hub mirror see https://gist.github.com/y0ngb1n/7e8f16af3242c7815e7ca2f0833d3ea6

gist.github.com 无法访问问题，请自行百度解决

screenhost of above link content @ 2023.12.22

sunao2002002 · 2024-05-06T06:20:32Z

What is the password for nuclei when using the docker image?

fanghuaqi · 2024-05-06T06:23:40Z

What is the password for nuclei when using the docker image?

# In docker now, user/pwd: nuclei/riscv123

sunao2002002 · 2024-05-06T06:26:48Z

What is the password for nuclei when using the docker image?

# In docker now, user/pwd: nuclei/riscv123

Thanks for the answer. It works.

fanghuaqi added the documentation Improvements or additions to documentation label Nov 3, 2022

fanghuaqi self-assigned this Nov 3, 2022

fanghuaqi added a commit that referenced this issue Nov 3, 2022

doc: update doc about docker and prepared source

b401f53

- #4 - #8

fanghuaqi mentioned this issue Dec 27, 2022

how to do git clone clean source code 如何Clone下载干净的代码 #10

Open

This was referenced Jul 14, 2023

Common Questions 常见问题 #12

Open

如何下载最新的源码(无git) How to download latest source code without git #4

Open

fanghuaqi mentioned this issue Apr 30, 2024

OP-TEE build does not continue after OpenSBI #25

Closed

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Using prebuilt linuxsdk docker image #8

Using prebuilt linuxsdk docker image #8

fanghuaqi commented Nov 3, 2022 •

edited

Loading

fanghuaqi commented Nov 3, 2022 •

edited

Loading

fanghuaqi commented Nov 23, 2023 •

edited

Loading

fanghuaqi commented Nov 27, 2023 •

edited

Loading

fanghuaqi commented Dec 20, 2023

fanghuaqi commented Dec 22, 2023 •

edited

Loading

sunao2002002 commented May 6, 2024

fanghuaqi commented May 6, 2024

sunao2002002 commented May 6, 2024

Using prebuilt linuxsdk docker image #8

Using prebuilt linuxsdk docker image #8

Comments

fanghuaqi commented Nov 3, 2022 • edited Loading

fanghuaqi commented Nov 3, 2022 • edited Loading

fanghuaqi commented Nov 23, 2023 • edited Loading

fanghuaqi commented Nov 27, 2023 • edited Loading

fanghuaqi commented Dec 20, 2023

fanghuaqi commented Dec 22, 2023 • edited Loading

sunao2002002 commented May 6, 2024

fanghuaqi commented May 6, 2024

sunao2002002 commented May 6, 2024

fanghuaqi commented Nov 3, 2022 •

edited

Loading

fanghuaqi commented Nov 3, 2022 •

edited

Loading

fanghuaqi commented Nov 23, 2023 •

edited

Loading

fanghuaqi commented Nov 27, 2023 •

edited

Loading

fanghuaqi commented Dec 22, 2023 •

edited

Loading