Skip to content

1. Bill Of Materials

Jump to bottom
OmNomNomagon edited this page Apr 29, 2018 · 44 revisions

Total BOM is approx 100-150USD. However this is highly dependent on what you have laying around, where you source your parts from, what you want to carry over, and where in the world you are. A lot of my costs in Australia were shipping related.

I recommend Misumi for the core parts and will provide part numbers for each of those. Misumi regularly have a 30% off code for first time orders, which helps to keep costs down. For everything else cheap Ebay / Aliexpress parts will do. Many of the printed parts are designed around the Misumi plate bracket hole spacings. If you can’t source these parts (as misumi can be a pain to order from if you are outside of the US), I have another Thingiverse remix filled with tabbed printed brackets. These definitely won't be as strong or sturdy as the proper metal braces however.

Summarised Parts List:

Part Description Number Reqd
3030 Extrusion 355mm Z Axis - HFSLB6-3030-355 2
3030 Extrusion 350mm Y Axis HFSLB6-3030-350 2
3030 Extrusion 380mm X Axis Tower - HFSLB6-3030-380 2
3030 Extrusion 258mm X Axis Base HFSLB6-3030-258 2
30x30x35 Corner Brackets Tabbed on SINGLE Side only HBLFSNB6 14
Alluminium Flat bracket 4 mount holes HPTLS6. 8
LM8UU Bearings Std 8mm 15mm long bearings LMU8 4
M5 12mm Button head Screw 70
M5 16mm Button head Screw 10
M5 T-Nuts 3030 T-Nuts Drop in preferred 80
M5 20-25mm Low Profile Button head (less than 4.2mm) 1
M5 30-35mm Screw M5 1
M3 Heatserts Brass heat inserts M3 thread 22
M3 4-8mm Button Head Screw M5 8
M3 12mm Button Head Screw M5 6
M3 16mm Button Head Screw M5 6
M3 30mm Screw M3 3
M3 6-8mm Countersunk M3 4
M3 6-12mm Countersunk M3 8
M5 Nylock Nuts for Idlers 2
M3 Nylock Nut for part cooling and heat sert substitute 1 - 15
M5 Smooth Idler Pulley (Optional) 9mm wide replacement 2
M5 Fibrous Washers For idler Pulleys 3 - 10
GT2 Belt 6mm belt 1m
50mm Blower Part Cooling 1

In Depth Descriptions:

  • A Wanhao i3 Duh! (these parts will also allow you to upgrade most other prusa style printers, just adjust the lengths of your printer compared to the Wanhao’s smooth rods (X=320mm Z=320mm Y=380mm)

  • Various 3030 T-slot Aluminium Extrusions

    • 2x 380MM - Tower X - HFSLB6-3030-380
    • 2x 355MM - Tower Z - HFSLB6-3030-355
    • 2x 350MM - Base Y - HFSLB6-3030-350
    • 2x 258MM - Base X - HFSLB6-3030-258

  • 14x Corner Brackets 30x30x25 - Importantly these should be only be tabbed on one side! We are stacking two extrusions perpendicular on top of eachother. If they are tabbed on both sides they will NOT fit. HBLFSNB6

  • 8x Aluminium Corner plates with 4 mounting holes. The legs and printed corner parts are all based on the misumi hole spacing HPTLS6.

  • 4x LM8UU Bearings. These replace the stock Z bearings. It is also worthwhile purchasing some of the longer LM8LUU bearing to replace the X and Y axises if you are coming from a pre 2.1 wanhao. These misumi ones are much higher quality than the originals. LMU8, LMUW8.

  • 70x M5 12mm Button head screws

  • 10x M5 16mm Button head screws

  • 80 M5 T-Nuts. Drop in T-nuts are recommended as they are easier to work with.

  • 1x M5 20-25 mm Button Head screw (low profile) The head needs to be 4.2mm or less long as this sits between the idler part and the leadscrew.

  • 1x M5 30-35mm screw

  • 22x M3 Heat-sert Brass inserts (M3-UHBRHESF) W4.4mm x H5.8mm or similar. These are set into parts using a hot soldering iron and are great for making strong functional parts without having to worry about screw threads stripping over time. Proper thermal inserts are recommended, but the easier to source injection molding type ones should work almost as well.

  • 7x 4-8mm M3 Button head

  • 6x 12mm M3 Button head

  • 6x 16mm M3 Button head

  • 3x 30mm M3 screw

  • 4x 6-8mm M3 countersunk

  • 8x 6-12mm countersunk (for leadscrew nuts) you also may want to secure these with nylocks m3 x8

  • 2x M5 Nylock nut

  • 1x M3 Nylock for part cooling bracket. 6 more can be used as a substitute for the extruder assembly if Heat-serts cannot be found.

  • Some fasteners are carried across from the Wanhao. This includes the hotend screws, and the M4 x-carriage screws.

  • (Optional) 2x M5 Smooth Idler Pulleys. The original Wanhao pulleys are prone to failure over time and are 11mm wide. i recommend switching them out with new ones while doing this mod. Most replecement ones are 9mm wide which allows you to use the X Gantry Idler 9MM part instead of the X Gantry Idler 11mm (Stock idler) part. The 9mm version has thicker walls which should make it more durable over time.

  • 3-10 M5 washers (Steel or fibrous). Used to secure the X and Y idlers. Variable number required depending on their thickness and whether you are using stock idlers or the usually thinner aftermarket ones.

  • 1 Meter of GT2 6mm belt. The X carriage distances are increased and the stock belt may not be long enough. aprox 770mm is required.

  • 50mm Blower Fan. Hopefully you should already have one of these in your arsenal as they make a huge improvement to print quality

Fasteners required

Summarised Misumi Parts List

  • HFSLB6-3030-355 2
  • HFSLB6-3030-380 2
  • HFSLB6-3030-350 2
  • HFSLB6-3030-258 2
  • HPTLS6 8
  • HBLFSNB6 14
  • LMU8 4

Notes: Substitute with HFSL6-3030 if you would like non anodized silver HFS-3030 (Standard) or any other type of 3030 can be substituted instead.

Essential Tools

  • Set Square, ruler, measuring tape. - to ensure everything is a flush 90 degrees
  • Xacto Knife to clean prints, especially screw holes
  • soldering iron to insert the brass heat-serts

Thingiverse

Clone this wiki locally