diff --git a/website/docs/ThirdParty/ThinkPulse/ThinkPulse_Getting_Started.md b/website/docs/ThirdParty/ThinkPulse/ThinkPulse_Getting_Started.md index dd100e753..beb72fe29 100644 --- a/website/docs/ThirdParty/ThinkPulse/ThinkPulse_Getting_Started.md +++ b/website/docs/ThirdParty/ThinkPulse/ThinkPulse_Getting_Started.md @@ -18,16 +18,13 @@ This kit has been designed and its compatibility tested for the 8 and 16 channel

-## ThinkPulse Starter Kit $349.99 Contents +## ThinkPulse Starter Kit Contents
![ThinkPulse contents](../../assets/ThirdPartyImages/ThinkPulse_starter_kit_contents.png)
- -Note, the replacement set $99.99 is just for those who want backup electrode tips. The Starter Kit $349.99 includes the necessary electrodes and electrode tips. -

@@ -50,7 +47,6 @@ Below is the step-by-step tutorial by Conscious Labs on how to install the Think The assembly video shows how to install the power supply board to a post-2018 Cyton and a pre-2018 Cyton. Some early ThinkPulse units have a hardware bug. The fix is a straightforward, quick solder job. The first minute of the video explains how to do it. - ThinkPulse kits that shipped post-January 2021 are fixed and do not require soldering. If you need help or have any questions, email [support@openbci.com](mailto:support@openbci.com) @@ -65,7 +61,7 @@ If you need help or have any questions, email [support@openbci.com](mailto:suppo [![cable management](../../assets/ThirdPartyImages/ThinkPulse_assembly_step5.png)](https://youtu.be/J2ZVDfayahs) -## Using the ThinkPulse™ sensors with OpenBCI Cyton Board +## Troubleshooting the ThinkPulse™ sensors with OpenBCI Cyton Board The following information applies specifically to Cyton and Cyton+Daisy Boards. If you are seeing `RAILED` in the GUI, try the following tips: @@ -79,6 +75,12 @@ The following information applies specifically to Cyton and Cyton+Daisy Boards. ![ThinkPulse and Cyton Channel Setting Example](../../assets/ThirdPartyImages/ThinkPulse_Cyton_HardwareChannelSetting.png) +## How to replace ThinkPulse™ electrode prongs + +Removal: Insert a small flat screwdriver where the electrode prongs seat into the electrode body. Gently pull/twist until the prongs loosen. +
+Installation: To install replacement prongs, insert into the electrode body and twist until secure. + ## Technical Specs and Data Sheet **[Full Technical Information](https://drive.google.com/file/d/1Ri2UPmPH2SrTjYQ8Mj046ciWLGzRxCSl/view?usp=sharing)**