Description of what each Entity is for.

[wranglatang]

Good Morning,

Wondering if we could get a better description of what each entity does as its a little confusing for someone just picking it up. I have had a crack at it, but there are some im not sure on. It also doesnt help that i havent yet plugged a car into it to see how these things change. For reference I have the Single Phase, Tethered Charger plugged into my inverter to get meter readings.

Entity	Description	My Comments
number.solax_evc_max_charge_current_setting	Maximum Current used for Charging
number.solax_evc_smart_boost_energy	kWH used for Boost Function
select.solax_evc_boost_mode	Boost Mode Function *
select.solax_evc_charge_phase	Charging Phase **
select.solax_evc_charger_eco_mode_level	Current used for Eco Mode Charging
select.solax_evc_charger_green_mode_level	Current used for Green Mode Charging
select.solax_evc_charger_use_mode	Current Selected Mode ***
select.solax_evc_meter_setting	Meter Setting
select.solax_evc_start_charge_mode	Charge activation P&P or RFID
sensor.solax_evc_available_pv_power	When connected via Inverter - this reading is the power coming from the inverter (PV, Battery) and can also go negative for grid readings. When Connected Via CT - This reading is the current consumption or export to the grid.
sensor.solax_evc_boost_mode	Boost mode function selected*
sensor.solax_evc_charge_added	Charge Added	Unsure if this is today?
sensor.solax_evc_charge_added_total_energy	Lifetime Charge Added
sensor.solax_evc_charge_current	Current Amperage to Vehicle
sensor.solax_evc_charge_frequency	Current Frequency to Vehicle
sensor.solax_evc_charge_power	Current Power to Vehicle
sensor.solax_evc_charge_power_total	Current Power to Vehicle	Unsure the difference between this and the above
sensor.solax_evc_charge_start_time	Start time of the charge
sensor.solax_evc_charge_time	Lifetime Number of Charge Cycles
sensor.solax_evc_charge_voltage	Current Voltage to Vehicle
sensor.solax_evc_charger_temperature	Temperature of the EVC
sensor.solax_evc_charger_use_mode	Current Selected Mode ***
sensor.solax_evc_ct_meter_setting	Meter Setting
sensor.solax_evc_firmware_version	Firmware version
sensor.solax_evc_grid_current	Current Amperage of Grid
sensor.solax_evc_grid_power	Current Power of Grid
sensor.solax_evc_max_charge_current	Maximum Current used for Charging
sensor.solax_evc_run_mode	Run Mode
sensor.solax_evc_start_charge_mode	Charge activation P&P or RFID
time.solax_evc_smart_boost_end	End Time of Smart Boost
time.solax_evc_timed_boost_end	End Time of Timed Boost
time.solax_evc_timed_boost_start	Start Time of Timed Boost
* Boost Mode Functions	Normal
	Timer
	Smart
** Charging Phase	Three Phase
	L1
	L2
	L3
*** Use Modes	Stop
	Fast
	Eco
	Green

[PatrikTrestik]

Hi.

Unfortunately there is no better description. All we have is SolaX documentation. Work done here is pure reverse engineering.
Where it is known I name sensors as per SolaX application.
There are some sensors where only Modbus documentation exists and you can check there.

If you have some entity you think it is usefull, you can try investigate. I can start wiki here to compile documentation.
But till now all users ware able to map meaning to application and use it.

Regards,
Patrik

[wranglatang]

Yeah, i understand, Unfortunately SolaX documentation is lacking at best. I guess what i was getting at is writing someone up describing your interpretation of what these sensors are for? Im happy to assist in this wiki if useful :)