Commit
This commit does not belong to any branch on this repository, and may belong to a fork outside of the repository.
gpio: Assign gpio_irq_chip::parents to non-stack pointer
gpiochip_set_cascaded_irqchip() is passed 'parent_irq' as an argument and then the address of that argument is assigned to the gpio chips gpio_irq_chip 'parents' pointer shortly thereafter. This can't ever work, because we've just assigned some stack address to a pointer that we plan to dereference later in gpiochip_irq_map(). I ran into this issue with the KASAN report below when gpiochip_irq_map() tried to setup the parent irq with a total junk pointer for the 'parents' array. BUG: KASAN: stack-out-of-bounds in gpiochip_irq_map+0x228/0x248 Read of size 4 at addr ffffffc0dde472e0 by task swapper/0/1 CPU: 7 PID: 1 Comm: swapper/0 Not tainted 4.14.72 #34 Call trace: [<ffffff9008093638>] dump_backtrace+0x0/0x718 [<ffffff9008093da4>] show_stack+0x20/0x2c [<ffffff90096b9224>] __dump_stack+0x20/0x28 [<ffffff90096b91c8>] dump_stack+0x80/0xbc [<ffffff900845a350>] print_address_description+0x70/0x238 [<ffffff900845a8e4>] kasan_report+0x1cc/0x260 [<ffffff900845aa14>] __asan_report_load4_noabort+0x2c/0x38 [<ffffff900897e098>] gpiochip_irq_map+0x228/0x248 [<ffffff900820cc08>] irq_domain_associate+0x114/0x2ec [<ffffff900820d13c>] irq_create_mapping+0x120/0x234 [<ffffff900820da78>] irq_create_fwspec_mapping+0x4c8/0x88c [<ffffff900820e2d8>] irq_create_of_mapping+0x180/0x210 [<ffffff900917114c>] of_irq_get+0x138/0x198 [<ffffff9008dc70ac>] spi_drv_probe+0x94/0x178 [<ffffff9008ca5168>] driver_probe_device+0x51c/0x824 [<ffffff9008ca6538>] __device_attach_driver+0x148/0x20c [<ffffff9008ca14cc>] bus_for_each_drv+0x120/0x188 [<ffffff9008ca570c>] __device_attach+0x19c/0x2dc [<ffffff9008ca586c>] device_initial_probe+0x20/0x2c [<ffffff9008ca18bc>] bus_probe_device+0x80/0x154 [<ffffff9008c9b9b4>] device_add+0x9b8/0xbdc [<ffffff9008dc7640>] spi_add_device+0x1b8/0x380 [<ffffff9008dcbaf0>] spi_register_controller+0x111c/0x1378 [<ffffff9008dd6b10>] spi_geni_probe+0x4dc/0x6f8 [<ffffff9008cab058>] platform_drv_probe+0xdc/0x130 [<ffffff9008ca5168>] driver_probe_device+0x51c/0x824 [<ffffff9008ca59cc>] __driver_attach+0x100/0x194 [<ffffff9008ca0ea8>] bus_for_each_dev+0x104/0x16c [<ffffff9008ca58c0>] driver_attach+0x48/0x54 [<ffffff9008ca1edc>] bus_add_driver+0x274/0x498 [<ffffff9008ca8448>] driver_register+0x1ac/0x230 [<ffffff9008caaf6c>] __platform_driver_register+0xcc/0xdc [<ffffff9009c4b33c>] spi_geni_driver_init+0x1c/0x24 [<ffffff9008084cb8>] do_one_initcall+0x240/0x3dc [<ffffff9009c017d0>] kernel_init_freeable+0x378/0x468 [<ffffff90096e8240>] kernel_init+0x14/0x110 [<ffffff9008086fcc>] ret_from_fork+0x10/0x18 The buggy address belongs to the page: page:ffffffbf037791c0 count:0 mapcount:0 mapping: (null) index:0x0 flags: 0x4000000000000000() raw: 4000000000000000 0000000000000000 0000000000000000 00000000ffffffff raw: ffffffbf037791e0 ffffffbf037791e0 0000000000000000 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffffffc0dde47180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffffffc0dde47200: f1 f1 f1 f1 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f2 f2 >ffffffc0dde47280: f2 f2 00 00 00 00 00 00 00 00 00 00 f3 f3 f3 f3 ^ ffffffc0dde47300: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffffffc0dde47380: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Let's leave around one unsigned int in the gpio_irq_chip struct for the single parent irq case and repoint the 'parents' array at it. This way code is left mostly intact to setup parents and we waste an extra few bytes per structure of which there should be only a handful in a system. Cc: Evan Green <[email protected]> Cc: Thierry Reding <[email protected]> Cc: Grygorii Strashko <[email protected]> Fixes: e0d8972 ("gpio: Implement tighter IRQ chip integration") Signed-off-by: Stephen Boyd <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
- Loading branch information