A program to adjust the settings of a WSPRlite device ( https://www.sotabeams.co.uk/wsprlite ).
License: GPLv3+
Instructions and compiled executables can be found at https://dxplorer.net/wsprlite/
You may need to install the "CP210x USB to UART Bridge VCP" driver manually. Download drivers here.
The config program as published on dxplorer.net is statically linked, so should not need any extra DLLs.
If the config program runs but cannot communicate with the WSPRlite, you may need to add yourself to a specific group (e.g. dialout or uucp) so that you can access the USB device. See doc/linux-serial.md for details.
- cmake
- g++
- git-core
- wxWidgets (v3.1.4 or later) - package name is usually something like libwxgtk3.2-dev on Linux
- libserialport (v0.1.1 or later).
git clone https://github.com/SOTAbeams/WSPRliteConfig.git
cd WSPRliteConfig
git submodule update --init
mkdir build
cd build
cmake ..
make
Remember to run git submodule update --init first.
This program uses some modern C++ features. This means it might or might not successfully compile in Visual Studio.
- libserialport - GNU LGPLv3+
- wxWidgets - wxWindows Library Licence
- CRC++ - 3-clause BSD license
- cppcodec - MIT/Expat license
CRC++ and cppcodec are header only libraries and are set up as git submodules in this repository, so should not need to be installed in order to compile the config program. libserialport and wxWidgets (and their development packages if applicable) need to be installed to compile the program.