IMU.ino

void readIMU() {
  //Acceletometer
  ax = convertInt(IMU.accelerometer_x(IMU.readFromAccelerometer()), acc_overflow_value);
  ay = convertInt(IMU.accelerometer_y(IMU.readFromAccelerometer()), acc_overflow_value);
  az = convertInt(IMU.accelerometer_z(IMU.readFromAccelerometer()), acc_overflow_value);


  //Magnetometer
  cx = IMU.compass_x(IMU.readFromCompass());
  cy = IMU.compass_y(IMU.readFromCompass());
  cz = IMU.compass_z(IMU.readFromCompass());


  //  Gyrocope
  gx = convertInt(IMU.gyro_x(IMU.readGyro()), gyro_overflow_value);  //  gx -  Pitch rate
  gy = convertInt(IMU.gyro_y(IMU.readGyro()), gyro_overflow_value);  //  gy -  Roll rate
  gz = convertInt(IMU.gyro_z(IMU.readGyro()), gyro_overflow_value);  //  gz -  Yaw rate


  //Temperature sensor
  gt = IMU.temp(IMU.readGyro());


  // Pitch angle from accelerometer
  acc_pitch = -1 * atan2(ax, sqrt((pow(ay, 2) + pow(az, 2)))) * 180.0 / PI;


  //Pitch rate from gyroscope
  pitch_rate = -gy;


  //Complementary filter
  pitch = acc_pitch * (1 - alpha) + (((pitch_rate * dT_s) + pitch_prev) * alpha);
  pitch_prev = pitch;
}


int convertInt(int raw, int overflow_value_) {
  //For some reason the ints in the example behaves as unsigned int.. Maybe look at the .cpp code, might be something there, if not. This works OK.

  if (raw > (overflow_value_ / 2)) {
    return (raw - overflow_value_);
  }

  else {
    return raw;
  }
}