Update intervall

[lynntryanderror]

Hello,

first of all thanks very much for the integration!

I wanted to change the update intervall for pulling the data. Were in the code can i change that?

Kind regards
Lynn

[gdwa]

/config/custom_components/solarman/const.py

MIN_TIME_BETWEEN_UPDATES = timedelta(seconds=120)

[lynntryanderror]

Thanks very much

[speedster-pta]

I've changed this to seconds=0 and it was updating at about 30 seconds intervals. I see now it is back to between one and two minutes, although I haven't changed anything. What would cause the delay in updates?

[PV-Joe]

Same here. I set it to 30 seconds. I did. work for a while and the update interval for my Deye 8K Hybrid is back to one minute.

I would still like to speed it up.

Any other solutions to increase the interval?

[speedster-pta]

My problem was that for some reason the logger was disconnecting from the wifi intermittently. This has since resolved itself and updates are consistent at 30 secs

[PV-Joe]

I checked it and my configuration for the Deye 8K Hybrid inverter was:

MIN_TIME_BETWEEN_UPDATES = timedelta(seconds=30)

The only entity that is updating with the 30 seconds interval is the production.

[PV-Joe]

After a couple of days my Solarman update Intervall for the production is back to 1 minute.

I didn’t change anything and it is still set to 30 seconds.

I don’t know what is going on and don’t understand this behavior 🤔

[gdwa]

The stick is not reliable at all.
I ask for a 2 minutes refresh to give it some relief. When looking at up-time , it's rebooting every 5 to 10 minutes. It's a crap device. It's only a feeling but the less I stress it, the most chances to receive an update I get.

I keep an eye on the last update time stamp and put some notifications towards my iPhone when no update for 30 min. Very rarely happening.

[PV-Joe]

These values are updating every minute and working absolutely reliable since 9 months.