Register with Julia Registry #14

TS-CUBED · 2023-01-08T13:37:42Z

JuliaRegistrator · 2023-01-08T13:37:48Z

Registration pull request created: JuliaRegistries/General/75321

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.3.0 -m "<description of version>" 518a796c4a40819d37887cdfa917632342d50e90
git push origin v0.3.0

Also, note the warning: This looks like a new registration that registers version 0.3.0.
Ideally, you should register an initial release with 0.0.1, 0.1.0 or 1.0.0 version numbers
This can be safely ignored. However, if you want to fix this you can do so. Call register() again after making the fix. This will update the Pull request.

briochemc · 2023-01-09T06:15:36Z

My 2 cents: "CirculationModels" sounds too general to me. For earth-system science peeps, circulation model means a model of the movement of air in the atmosphere or water in the ocean.

Maybe the name can be more specific? What does this package mean by "circulation model"?

TS-CUBED · 2023-01-09T10:48:09Z

My 2 cents: "CirculationModels" sounds too general to me. For earth-system science peeps, circulation model means a model of the movement of air in the atmosphere or water in the ocean.

You are right. We will change the name to CirculatorySystemModels.jl

TS-CUBED · 2023-01-09T22:22:37Z

@JuliaRegistrator register

JuliaRegistrator · 2023-01-09T22:22:46Z

Registration pull request created: JuliaRegistries/General/75423

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.1.0 -m "<description of version>" 9a683d071951a9b10e8f1429fb70bbe3d4989220
git push origin v0.1.0

TS-CUBED · 2023-07-31T20:43:28Z

@JuliaRegistrator register

JuliaRegistrator · 2023-07-31T20:43:37Z

Registration pull request created: JuliaRegistries/General/88739

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.1.1 -m "<description of version>" 3cb2a112527b7dd215d7878870b41b6d9944a70b
git push origin v0.1.1

TS-CUBED · 2023-08-03T14:23:24Z

@JuliaRegistrator register

JuliaRegistrator · 2023-08-03T14:23:33Z

Registration pull request created: JuliaRegistries/General/88947

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.1.2 -m "<description of version>" 57ad65a5951110e79b5ee260621cfe09ce0c625f
git push origin v0.1.2

TS-CUBED · 2023-08-03T16:44:20Z

@JuliaRegistrator register

JuliaRegistrator · 2023-08-03T16:44:28Z

Registration pull request created: JuliaRegistries/General/88963

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.1.3 -m "<description of version>" 77e713b976b7472c4396ed1c2db4a7516a299c3f
git push origin v0.1.3

TS-CUBED · 2023-08-03T21:53:55Z

@JuliaRegistrator register

JuliaRegistrator · 2023-08-03T21:54:04Z

Registration pull request created: JuliaRegistries/General/88990

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.1.4 -m "<description of version>" 4f1684228f2689d1076bcc06396977a0a061fe2e
git push origin v0.1.4

TS-CUBED · 2023-08-17T13:12:31Z

@JuliaRegistrator register

JuliaRegistrator · 2023-08-17T13:12:40Z

Registration pull request created: JuliaRegistries/General/89827

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.1.5 -m "<description of version>" 6fc79f2d465967f0c616a87f0a3a0d2f1f3b877f
git push origin v0.1.5

TS-CUBED · 2023-11-19T19:03:10Z

@JuliaRegistrator register

Release Notes:

Breaking changes:

The Double-Hill chamber DHChamber is now in terms of dV/dt rather than dp/dt which increases computation speed by an order of magnitude. The parameter Ev has been removed.

Please use the ventricular volume as an initial condition instead of the pressure. This can be calculated as $V = p/E_{min}$

JuliaRegistrator · 2023-11-19T19:03:21Z

Registration pull request created: JuliaRegistries/General/95607

Tip: Release Notes

Did you know you can add release notes too? Just add markdown formatted text underneath the comment after the text
"Release notes:" and it will be added to the registry PR, and if TagBot is installed it will also be added to the
release that TagBot creates. i.e.

@JuliaRegistrator register

Release notes:

## Breaking changes

- blah

To add them here just re-invoke and the PR will be updated.

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.2.0 -m "<description of version>" f1f69f7968c444fa57fbb4a9615a8529b02ff837
git push origin v0.2.0

JuliaRegistrator · 2023-11-19T19:09:43Z

Registration pull request updated: JuliaRegistries/General/95607

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.2.0 -m "<description of version>" f1f69f7968c444fa57fbb4a9615a8529b02ff837
git push origin v0.2.0

TS-CUBED · 2023-11-20T22:43:46Z

@JuliaRegistrator register

Release Notes:

Breaking changes:

The Double-Hill chamber DHChamber is now in terms of dV/dt rather than dp/dt which increases computation speed by an order of magnitude. The old form can be recovered using the inP argument. The parameter Ev has been removed. Please use the ventricular volume as an initial condition instead of the pressure. This can be calculated as $V = p/E_{min}$
Compliance and Elastance are now in terms of dV/dt. Use the new argument inP=true to recover the old form. Initial conditions need to be changed accordingly.
Compliance and Elastance have options for external pressure as parameter has_ep and as a connector pin to connect other pressures to has_variable_ep - the latter can take an equation like C.ep.p ~ LV.p * K.
Chamber has been deleted and replaced with VariableCompliance which can take a function for E(t) and has external pressure options like the other compliances and elastances.

JuliaRegistrator · 2023-11-20T22:43:57Z

Registration pull request created: JuliaRegistries/General/95670

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.3.0 -m "<description of version>" 637798f3e6e23887e099b8ba6273543256895c02
git push origin v0.3.0

TS-CUBED · 2023-11-22T11:38:04Z

@JuliaRegistrator register

Release Notes:

Breaking changes since version 0.1.X:

The Double-Hill chamber DHChamber is now in terms of dV/dt rather than dp/dt which increases computation speed by an order of magnitude. The old form can be recovered using the inP argument. The parameter Ev has been removed. Please use the ventricular volume as an initial condition instead of the pressure. This can be calculated as $V = p/E_{min}$
Compliance and Elastance are now in terms of dV/dt. Use the new argument inP=true to recover the old form. Initial conditions need to be changed accordingly.
Compliance and Elastance have options for external pressure as parameter has_ep and as a connector pin to connect other pressures to has_variable_ep - the latter can take an equation like C.ep.p ~ LV.p * K.
Chamber has been deleted and replaced with VariableCompliance which can take a function for E(t) and has external pressure options like the other compliances and elastances.
ShiChamber already was formulated in terms of dV/dt. It now has the argument inP=true to allow the dp/dt form. Initial conditions need to be changed accordingly.

NOTE: the use of inP is strongly discouraged, since it needs the first derivative of the Elastance function, is less stable, and an order of magnitude slower. If you want to define initial condtions in pressure, it is advised to calculate the corresponding initial volume.

JuliaRegistrator · 2023-11-22T11:38:18Z

Registration pull request created: JuliaRegistries/General/95784

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.3.1 -m "<description of version>" 0deb97dddbb0583a3316491d342c05911d31b8c5
git push origin v0.3.1

TS-CUBED · 2023-11-22T14:54:15Z

@JuliaRegistrator register

Release Notes:

Breaking changes since version 0.1.X:

The Double-Hill chamber DHChamber is now in terms of dV/dt rather than dp/dt which increases computation speed by an order of magnitude. The old form can be recovered using the inP argument. The parameter Ev has been removed. Please use the ventricular volume as an initial condition instead of the pressure. This can be calculated as $V = p/E_{min}$
Compliance and Elastance are now in terms of dV/dt. Use the new argument inP=true to recover the old form. Initial conditions need to be changed accordingly.
Compliance and Elastance have options for external pressure as parameter has_ep and as a connector pin to connect other pressures to has_variable_ep - the latter can take an equation like C.ep.p ~ LV.p * K.
Chamber has been deleted and replaced with VariableCompliance which can take a function for E(t) and has external pressure options like the other compliances and elastances.
ShiChamber already was formulated in terms of dV/dt. It now has the argument inP=true to allow the dp/dt form. Initial conditions need to be changed accordingly.

NOTE: the use of inP is strongly discouraged, since it needs the first derivative of the Elastance function, is less stable, and an order of magnitude slower. If you want to define initial condtions in pressure, it is advised to calculate the corresponding initial volume.

JuliaRegistrator · 2023-11-22T14:54:28Z

Registration pull request updated: JuliaRegistries/General/95784

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.3.1 -m "<description of version>" 0deb97dddbb0583a3316491d342c05911d31b8c5
git push origin v0.3.1

TS-CUBED · 2023-12-24T10:26:36Z

@JuliaRegistrator register

Release Notes:

Breaking changes since version 0.1.X:

The Double-Hill chamber DHChamber is now in terms of dV/dt rather than dp/dt which increases computation speed by an order of magnitude. The old form can be recovered using the inP argument. The parameter Ev has been removed. Please use the ventricular volume as an initial condition instead of the pressure. This can be calculated as $V = p/E_{min}$
Compliance and Elastance are now in terms of dV/dt. Use the new argument inP=true to recover the old form. Initial conditions need to be changed accordingly.
Compliance and Elastance have options for external pressure as parameter has_ep and as a connector pin to connect other pressures to has_variable_ep - the latter can take an equation like C.ep.p ~ LV.p * K.
Chamber has been deleted and replaced with VariableCompliance which can take a function for E(t) and has external pressure options like the other compliances and elastances.
ShiChamber already was formulated in terms of dV/dt. It now has the argument inP=true to allow the dp/dt form. Initial conditions need to be changed accordingly.

NOTE: the use of inP is strongly discouraged, since it needs the first derivative of the Elastance function, is less stable, and an order of magnitude slower. If you want to define initial condtions in pressure, it is advised to calculate the corresponding initial volume.

JuliaRegistrator · 2023-12-24T10:26:48Z

Registration pull request updated: JuliaRegistries/General/95784

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.3.1 -m "<description of version>" 0deb97dddbb0583a3316491d342c05911d31b8c5
git push origin v0.3.1

TS-CUBED · 2023-12-24T10:27:21Z

@JuliaRegistrator register

Release Notes:

Breaking changes since version 0.1.X:

The Double-Hill chamber DHChamber is now in terms of dV/dt rather than dp/dt which increases computation speed by an order of magnitude. The old form can be recovered using the inP argument. The parameter Ev has been removed. Please use the ventricular volume as an initial condition instead of the pressure. This can be calculated as $V = p/E_{min}$
Compliance and Elastance are now in terms of dV/dt. Use the new argument inP=true to recover the old form. Initial conditions need to be changed accordingly.
Compliance and Elastance have options for external pressure as parameter has_ep and as a connector pin to connect other pressures to has_variable_ep - the latter can take an equation like C.ep.p ~ LV.p * K.
Chamber has been deleted and replaced with VariableCompliance which can take a function for E(t) and has external pressure options like the other compliances and elastances.
ShiChamber already was formulated in terms of dV/dt. It now has the argument inP=true to allow the dp/dt form. Initial conditions need to be changed accordingly.

NOTE: the use of inP is strongly discouraged, since it needs the first derivative of the Elastance function, is less stable, and an order of magnitude slower. If you want to define initial condtions in pressure, it is advised to calculate the corresponding initial volume.

JuliaRegistrator · 2023-12-24T10:27:23Z

Registration pull request updated: JuliaRegistries/General/95784

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.3.1 -m "<description of version>" 0deb97dddbb0583a3316491d342c05911d31b8c5
git push origin v0.3.1

JuliaRegistrator · 2023-12-24T10:27:32Z

Registration pull request updated: JuliaRegistries/General/95784

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.3.1 -m "<description of version>" 0deb97dddbb0583a3316491d342c05911d31b8c5
git push origin v0.3.1

TS-CUBED · 2024-10-06T07:45:05Z

@JuliaRegistrator register

Changelog

Breaking changes

Moved the module to the new MTK syntax. Due to changes in MTK9 this release is no longer compatible with MTK8 and Julia 1.9.

What's Changed

Update the lib with @mtkmodel by @ven-k in Update the lib with @mtkmodel #29
CompatHelper: bump compat for ModelingToolkit to 9, (keep existing compat) by @github-actions in CompatHelper: bump compat for ModelingToolkit to 9, (keep existing compat) #30
Reduce compile time by @termi-official in Reduce compile time #31
Impedance typo by @termi-official in Impedance typo #32
Update by @TS-CUBED in Update #33
Fix mtk9 42 by @TS-CUBED in Fix mtk9 42 #34

New Contributors

@ven-k made their first contribution in Update the lib with @mtkmodel #29
@termi-official made their first contribution in Reduce compile time #31

Full Changelog: v0.3.1...v0.4.0

JuliaRegistrator · 2024-10-06T07:45:18Z

Registration pull request created: JuliaRegistries/General/116685

Tip: Release Notes

Did you know you can add release notes too? Just add markdown formatted text underneath the comment after the text
"Release notes:" and it will be added to the registry PR, and if TagBot is installed it will also be added to the
release that TagBot creates. i.e.

@JuliaRegistrator register

Release notes:

## Breaking changes

- blah

To add them here just re-invoke and the PR will be updated.

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.4.0 -m "<description of version>" 1452959372b07785f3712bf01b8b2950e3fdcfda
git push origin v0.4.0

TS-CUBED · 2024-10-29T22:45:58Z

@JuliaRegistrator register

What's Changed

Updated the Bjordalsbakke example to remove extra initial conditions, which are no longer allowed (and no longer necessary) in MTK9. Since MTK9 the initial condition map cannot be over-prescribed.

Full Changelog: v0.4.0...v0.4.1

JuliaRegistrator · 2024-10-29T22:46:11Z

Registration pull request created: JuliaRegistries/General/118338

Tip: Release Notes

Did you know you can add release notes too? Just add markdown formatted text underneath the comment after the text
"Release notes:" and it will be added to the registry PR, and if TagBot is installed it will also be added to the
release that TagBot creates. i.e.

@JuliaRegistrator register

Release notes:

## Breaking changes

- blah

To add them here just re-invoke and the PR will be updated.

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.4.1 -m "<description of version>" 1b7ac54d63f32fbd4342b5bd9cb1fda3c335cf25
git push origin v0.4.1

JuliaRegistrator mentioned this issue Jan 8, 2023

New package: CirculationModels v0.3.0 JuliaRegistries/General#75321

Closed

JuliaRegistrator mentioned this issue Jan 9, 2023

New package: CirculatorySystemModels v0.1.0 JuliaRegistries/General#75423

Merged

JuliaRegistrator mentioned this issue Jul 31, 2023

New version: CirculatorySystemModels v0.1.1 JuliaRegistries/General#88739

Merged

JuliaRegistrator mentioned this issue Aug 3, 2023

New version: CirculatorySystemModels v0.1.2 JuliaRegistries/General#88947

Merged

JuliaRegistrator mentioned this issue Aug 3, 2023

New version: CirculatorySystemModels v0.1.3 JuliaRegistries/General#88963

Merged

JuliaRegistrator mentioned this issue Aug 3, 2023

New version: CirculatorySystemModels v0.1.4 JuliaRegistries/General#88990

Merged

JuliaRegistrator mentioned this issue Aug 17, 2023

New version: CirculatorySystemModels v0.1.5 JuliaRegistries/General#89827

Merged

JuliaRegistrator mentioned this issue Nov 19, 2023

New version: CirculatorySystemModels v0.2.0 JuliaRegistries/General#95607

Merged

JuliaRegistrator mentioned this issue Nov 20, 2023

New version: CirculatorySystemModels v0.3.0 JuliaRegistries/General#95670

Merged

JuliaRegistrator mentioned this issue Nov 22, 2023

New version: CirculatorySystemModels v0.3.1 JuliaRegistries/General#95784

Merged

JuliaRegistrator mentioned this issue Oct 6, 2024

New version: CirculatorySystemModels v0.4.0 JuliaRegistries/General#116685

Merged

JuliaRegistrator mentioned this issue Oct 29, 2024

New version: CirculatorySystemModels v0.4.1 JuliaRegistries/General#118338

Merged

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Register with Julia Registry #14

Register with Julia Registry #14

TS-CUBED commented Jan 8, 2023

JuliaRegistrator commented Jan 8, 2023

briochemc commented Jan 9, 2023

TS-CUBED commented Jan 9, 2023

TS-CUBED commented Jan 9, 2023

JuliaRegistrator commented Jan 9, 2023

TS-CUBED commented Jul 31, 2023

JuliaRegistrator commented Jul 31, 2023

TS-CUBED commented Aug 3, 2023

JuliaRegistrator commented Aug 3, 2023

TS-CUBED commented Aug 3, 2023

JuliaRegistrator commented Aug 3, 2023

TS-CUBED commented Aug 3, 2023

JuliaRegistrator commented Aug 3, 2023

TS-CUBED commented Aug 17, 2023

JuliaRegistrator commented Aug 17, 2023

TS-CUBED commented Nov 19, 2023 •

edited

Loading

JuliaRegistrator commented Nov 19, 2023

JuliaRegistrator commented Nov 19, 2023

TS-CUBED commented Nov 20, 2023

JuliaRegistrator commented Nov 20, 2023

TS-CUBED commented Nov 22, 2023

JuliaRegistrator commented Nov 22, 2023

TS-CUBED commented Nov 22, 2023

JuliaRegistrator commented Nov 22, 2023

TS-CUBED commented Dec 24, 2023 •

edited

Loading

JuliaRegistrator commented Dec 24, 2023

TS-CUBED commented Dec 24, 2023

JuliaRegistrator commented Dec 24, 2023

JuliaRegistrator commented Dec 24, 2023

TS-CUBED commented Oct 6, 2024

JuliaRegistrator commented Oct 6, 2024

TS-CUBED commented Oct 29, 2024

JuliaRegistrator commented Oct 29, 2024

Register with Julia Registry #14

Register with Julia Registry #14

Comments

TS-CUBED commented Jan 8, 2023

JuliaRegistrator commented Jan 8, 2023

briochemc commented Jan 9, 2023

TS-CUBED commented Jan 9, 2023

TS-CUBED commented Jan 9, 2023

JuliaRegistrator commented Jan 9, 2023

TS-CUBED commented Jul 31, 2023

JuliaRegistrator commented Jul 31, 2023

TS-CUBED commented Aug 3, 2023

JuliaRegistrator commented Aug 3, 2023

TS-CUBED commented Aug 3, 2023

JuliaRegistrator commented Aug 3, 2023

TS-CUBED commented Aug 3, 2023

JuliaRegistrator commented Aug 3, 2023

TS-CUBED commented Aug 17, 2023

JuliaRegistrator commented Aug 17, 2023

TS-CUBED commented Nov 19, 2023 • edited Loading

Breaking changes:

JuliaRegistrator commented Nov 19, 2023

Tip: Release Notes

Tagging

JuliaRegistrator commented Nov 19, 2023

Tagging

TS-CUBED commented Nov 20, 2023

Breaking changes:

JuliaRegistrator commented Nov 20, 2023

Tagging

TS-CUBED commented Nov 22, 2023

Breaking changes since version 0.1.X:

JuliaRegistrator commented Nov 22, 2023

Tagging

TS-CUBED commented Nov 22, 2023

Breaking changes since version 0.1.X:

JuliaRegistrator commented Nov 22, 2023

Tagging

TS-CUBED commented Dec 24, 2023 • edited Loading

Breaking changes since version 0.1.X:

JuliaRegistrator commented Dec 24, 2023

Tagging

TS-CUBED commented Dec 24, 2023

Breaking changes since version 0.1.X:

JuliaRegistrator commented Dec 24, 2023

Tagging

JuliaRegistrator commented Dec 24, 2023

Tagging

TS-CUBED commented Oct 6, 2024

Changelog

Breaking changes

What's Changed

New Contributors

JuliaRegistrator commented Oct 6, 2024

Tip: Release Notes

Tagging

TS-CUBED commented Oct 29, 2024

What's Changed

JuliaRegistrator commented Oct 29, 2024

Tip: Release Notes

Tagging

TS-CUBED commented Nov 19, 2023 •

edited

Loading

TS-CUBED commented Dec 24, 2023 •

edited

Loading