buildsCI.yaml

name: Build_CI

on:
  push:
    branches: ['**']
  pull_request:
    branches: ['**']
     
env:
  # Customize the CMake build type here (Release, Debug, RelWithDebInfo, etc.)  
  LRS_BUILD_CONFIG: Debug
  LRS_RUN_CONFIG: Release
  LRS_RUN_WITH_DEB_CONFIG: RelWithDebInfo
  PYTHON_PATH: C:\\hostedtoolcache\\windows\\Python\\3.8.1\\x64\\python.exe
  # GH-Actions Windows VM currently supply ~14 GB available on D drive, and ~80 GB on drive C.
  # Building LRS statically with third parties is too much for drive D so we clone to drive 'D' and build on drive 'C'
  WIN_BUILD_DIR: C:/lrs_build


jobs:


  #--------------------------------------------------------------------------------
  Win_SH_EX_CfU:  # Windows, shared, with Examples & Tools, and Check for Updates
    runs-on: windows-2019
    timeout-minutes: 60
    steps:
    - uses: actions/checkout@v3

    - name: Enable Long Paths
      shell: powershell
      run: |
       New-ItemProperty -Path "HKLM:\SYSTEM\CurrentControlSet\Control\FileSystem" -Name "LongPathsEnabled" -Value 1 -PropertyType DWORD -Force
    
    - name: Check_API
      shell: bash
      run: |
        cd scripts
        ./api_check.sh
        cd ..

    - name: PreBuild
      shell: bash
      run: |
       mkdir ${{env.WIN_BUILD_DIR}}
    
    - name: Configure CMake
      # Configure CMake in a 'build' subdirectory. `CMAKE_BUILD_TYPE` is only required if you are using a single-configuration generator such as make.
      # See https://cmake.org/cmake/help/latest/variable/CMAKE_BUILD_TYPE.html?highlight=cmake_build_type
      shell: bash
      run: |        
        LRS_SRC_DIR=$(pwd)
        cd ${{env.WIN_BUILD_DIR}}
        pwd
        ls        
        cmake ${LRS_SRC_DIR} -G "Visual Studio 16 2019" -DBUILD_SHARED_LIBS=true -DBUILD_EXAMPLES=true -DBUILD_TOOLS=true -DCHECK_FOR_UPDATES=true

    - name: Build
      # Build your program with the given configuration
      shell: bash
      run: |
        cd ${{env.WIN_BUILD_DIR}}
        cmake --build . --config ${{env.LRS_RUN_CONFIG}} -- -m

  #--------------------------------------------------------------------------------
  Win_SH_EX_No_Logs:  # Windows, shared, with Examples & Tools, no EasyLogging and no Check for Updates
    runs-on: windows-2019
    timeout-minutes: 60
    steps:
    - uses: actions/checkout@v3

    - name: Enable Long Paths
      shell: powershell
      run: |
       New-ItemProperty -Path "HKLM:\SYSTEM\CurrentControlSet\Control\FileSystem" -Name "LongPathsEnabled" -Value 1 -PropertyType DWORD -Force
    
    - name: Check_API
      shell: bash
      run: |
        cd scripts
        ./api_check.sh
        cd ..

    - name: PreBuild
      shell: bash
      run: |
       mkdir ${{env.WIN_BUILD_DIR}}
    
    - name: Configure CMake
      # Configure CMake in a 'build' subdirectory. `CMAKE_BUILD_TYPE` is only required if you are using a single-configuration generator such as make.
      # See https://cmake.org/cmake/help/latest/variable/CMAKE_BUILD_TYPE.html?highlight=cmake_build_type
      shell: bash
      run: |        
        LRS_SRC_DIR=$(pwd)
        cd ${{env.WIN_BUILD_DIR}}
        pwd
        ls        
        cmake ${LRS_SRC_DIR} -G "Visual Studio 16 2019" -DBUILD_SHARED_LIBS=true -DBUILD_EXAMPLES=true -DBUILD_TOOLS=true -DCHECK_FOR_UPDATES=false -DBUILD_EASYLOGGINGPP=false

    - name: Build
      # Build your program with the given configuration
      shell: bash
      run: |
        cd ${{env.WIN_BUILD_DIR}}
        cmake --build . --config ${{env.LRS_RUN_CONFIG}} -- -m    
        
  #--------------------------------------------------------------------------------
  Win_ST_Py_CI:  # Windows, Static, Python, Tools, libCI with executables
    runs-on: windows-2019
    timeout-minutes: 60
    steps:
    - uses: actions/checkout@v3
    - uses: actions/setup-python@v3
      with:
       python-version: '3.8.1'

    - name: Enable Long Paths
      shell: powershell
      run: |
       New-ItemProperty -Path "HKLM:\SYSTEM\CurrentControlSet\Control\FileSystem" -Name "LongPathsEnabled" -Value 1 -PropertyType DWORD -Force

    - name: Check_API
      shell: bash
      run: |
        cd scripts
        ./api_check.sh
        cd ..   

    - name: PreBuild
      shell: bash
      run: |
       mkdir ${{env.WIN_BUILD_DIR}}
       python3 -m pip install numpy

    - name: Configure CMake
      # Configure CMake in a 'build' subdirectory. `CMAKE_BUILD_TYPE` is only required if you are using a single-configuration generator such as make.
      # See https://cmake.org/cmake/help/latest/variable/CMAKE_BUILD_TYPE.html?highlight=cmake_build_type
      shell: bash
      run: |        
        LRS_SRC_DIR=$(pwd)   
        cd ${{env.WIN_BUILD_DIR}}
        cmake ${LRS_SRC_DIR} -G "Visual Studio 16 2019" -DBUILD_SHARED_LIBS=false -DBUILD_EXAMPLES=false -DBUILD_TOOLS=true -DBUILD_UNIT_TESTS=true -DUNIT_TESTS_ARGS="--not-live --context=windows" -DCHECK_FOR_UPDATES=false -DBUILD_WITH_DDS=false -DPYTHON_EXECUTABLE=${{env.PYTHON_PATH}} -DBUILD_PYTHON_BINDINGS=true 

    - name: Build
      # Build your program with the given configuration
      shell: bash
      run: |
        cd ${{env.WIN_BUILD_DIR}}
        cmake --build . --config ${{env.LRS_RUN_CONFIG}} -- -m

    - name: LibCI
      # Note: requires BUILD_UNIT_TESTS or the executable C++ unit-tests won't run (and it won't complain)
      shell: bash
      run: |
        python3 unit-tests/run-unit-tests.py --no-color --debug --stdout --not-live --context "windows" ${{env.WIN_BUILD_DIR}}/Release


  #--------------------------------------------------------------------------------
  Win_SH_Py_DDS_CI:  # Windows, Shared, Python, Tools, DDS, libCI without executables
    runs-on: windows-2019
    timeout-minutes: 60
    steps:
    - uses: actions/checkout@v3
    - uses: actions/setup-python@v3
      with:
       python-version: '3.8.1'

    - name: Enable Long Paths
      shell: powershell
      run: |
       New-ItemProperty -Path "HKLM:\SYSTEM\CurrentControlSet\Control\FileSystem" -Name "LongPathsEnabled" -Value 1 -PropertyType DWORD -Force
        
    - name: Check_API
      shell: bash
      run: |
        cd scripts
        ./api_check.sh
        cd ..   

    - name: PreBuild
      shell: bash
      run: |
       mkdir ${{env.WIN_BUILD_DIR}} 
       python3 -m pip install numpy

    - name: Configure CMake
      shell: bash
      run: |        
        LRS_SRC_DIR=$(pwd)   
        cd ${{env.WIN_BUILD_DIR}}
        cmake ${LRS_SRC_DIR} -G "Visual Studio 16 2019" -DBUILD_SHARED_LIBS=true -DBUILD_EXAMPLES=false -DBUILD_TOOLS=true -DBUILD_UNIT_TESTS=false -DCHECK_FOR_UPDATES=false -DBUILD_WITH_DDS=true -DPYTHON_EXECUTABLE=${{env.PYTHON_PATH}} -DBUILD_PYTHON_BINDINGS=true 

    - name: Build
      # Build your program with the given configuration
      shell: bash
      run: |
        cd ${{env.WIN_BUILD_DIR}}
        cmake --build . --config ${{env.LRS_RUN_CONFIG}} -- -m

    - name: LibCI
      # Note: we specifically disable BUILD_UNIT_TESTS so the executable C++ unit-tests won't run
      # This is to save time as DDS already lengthens the build...
      shell: bash
      run: |
        python3 unit-tests/run-unit-tests.py --no-color --debug --stdout --not-live --context "dds windows" ${{env.WIN_BUILD_DIR}}/Release


  #--------------------------------------------------------------------------------
  Win_SH_Py_RSUSB_Csharp:  # Windows, Shared, Python, RSUSB backend, C# bindings
    runs-on: windows-2019
    timeout-minutes: 60
      
    steps:
    - uses: actions/checkout@v3
    - uses: actions/setup-python@v3
      with:
       python-version: '3.8.1'

    - name: Enable Long Paths
      shell: powershell
      run: |
       New-ItemProperty -Path "HKLM:\SYSTEM\CurrentControlSet\Control\FileSystem" -Name "LongPathsEnabled" -Value 1 -PropertyType DWORD -Force

    - name: Check_API
      shell: bash
      run: |
        cd scripts
        ./api_check.sh
        cd ..   

    - name: PreBuild
      shell: bash
      run: |
       mkdir ${{env.WIN_BUILD_DIR}}

    - name: Configure CMake
      shell: bash
      run: |   
        LRS_SRC_DIR=$(pwd)
        cd ${{env.WIN_BUILD_DIR}}
        cmake ${LRS_SRC_DIR} -G "Visual Studio 16 2019" -DBUILD_SHARED_LIBS=true -DBUILD_EXAMPLES=false -DBUILD_TOOLS=false -DCHECK_FOR_UPDATES=false -DPYTHON_EXECUTABLE=${{env.PYTHON_PATH}} -DBUILD_PYTHON_BINDINGS=true -DFORCE_RSUSB_BACKEND=true -DBUILD_CSHARP_BINDINGS=true -DDOTNET_VERSION_LIBRARY="4.5" -DDOTNET_VERSION_EXAMPLES="4.5"

    - name: Build
      # Build your program with the given configuration
      shell: bash
      run: |
        cd ${{env.WIN_BUILD_DIR}}
        cmake --build . --config ${{env.LRS_BUILD_CONFIG}} -- -m    


  #--------------------------------------------------------------------------------
  U22_ST_Py_EX_CfU_LiveTest:  # Ubuntu 2022, Static, Python, Examples & Tools, Check for Updates, Legacy Live-Tests
    runs-on: ubuntu-22.04    
    timeout-minutes: 60
    steps:
    - uses: actions/checkout@v3
    
    - name: Prebuild
      shell: bash
      run: |
        cd scripts && ./api_check.sh && cd ..
        mkdir build && cd build
        export LRS_LOG_LEVEL="DEBUG";
        sudo apt-get update;
        sudo apt-get install -qq build-essential xorg-dev libgl1-mesa-dev libglu1-mesa-dev libglew-dev libglm-dev;
        sudo apt-get install -qq libusb-1.0-0-dev;
        sudo apt-get install -qq libgtk-3-dev;
        sudo apt-get install libglfw3-dev libglfw3;
    
    - name: Build
      shell: bash
      run: |
        cd build
        cmake .. -DCMAKE_BUILD_TYPE=${{env.LRS_RUN_CONFIG}} -DBUILD_SHARED_LIBS=false -DBUILD_EXAMPLES=true -DBUILD_TOOLS=true -DCHECK_FOR_UPDATES=true -DBUILD_LEGACY_LIVE_TEST=true -DBUILD_PYTHON_BINDINGS=true -DPYTHON_EXECUTABLE=$(which python3)
        cmake --build . -- -j4
        
    - name: Test
      shell: bash
      id: test-step
      # We set continue-on-error: true as a workaround for not skipping the upload log step on failure,
      # The final step will check the return value from the test step and decide if to fail/pass the job
      continue-on-error: true 
      run: |
        export LRS_LOG_LEVEL="DEBUG";
        cd build/${{env.LRS_RUN_CONFIG}}/
        ./live-test -d yes -i [software-device]        

    - name: Upload RS log artifact
      uses: actions/upload-artifact@v3
      with: 
        name: Log file - U22_ST_Py_EX_CfU_LiveTest
        path: build/*.log

    - name: Provide correct exit status for job 
      shell: bash
      run: |
        if [ ${{steps.test-step.outcome}} = "failure" ];then
           echo "Test step failed, please open it to view the reported issue"
           exit 1
        else
           exit 0
        fi


  #--------------------------------------------------------------------------------
  U20_SH_Py_CI:  # Ubuntu 2020, Shared, Python, LibCI with executables
    runs-on: ubuntu-20.04
    timeout-minutes: 60
    steps:
    - uses: actions/checkout@v3

    - name: Prebuild
      shell: bash
      run: |
        sudo apt-get update;
        sudo apt-get install -qq build-essential xorg-dev libgl1-mesa-dev libglu1-mesa-dev libglew-dev libglm-dev;
        sudo apt-get install -qq libusb-1.0-0-dev;
        sudo apt-get install -qq libgtk-3-dev;
        sudo apt-get install libglfw3-dev libglfw3;
        # We force compiling with GCC 7 because the default installed GCC 9 compiled with LTO and gives an internal compiler error
        sudo apt-get install gcc-7 g++-7;
        sudo update-alternatives --install /usr/bin/gcc gcc /usr/bin/gcc-7 60 --slave /usr/bin/g++ g++ /usr/bin/g++-7;
        python3 -m pip install numpy

    - name: Check_API
      shell: bash
      run: |
        cd scripts
        ./api_check.sh
        ./pr_check.sh
        cd ..
        mkdir build

    - name: Build
      shell: bash
      run: |
        cd build
        cmake .. -DCMAKE_BUILD_TYPE=${{env.LRS_RUN_CONFIG}} -DBUILD_SHARED_LIBS=true -DBUILD_EXAMPLES=false -DBUILD_TOOLS=true -DBUILD_UNIT_TESTS=true -DUNIT_TESTS_ARGS="--not-live --context=linux" -DCHECK_FOR_UPDATES=false -DBUILD_WITH_DDS=false -DBUILD_PYTHON_BINDINGS=true -DPYTHON_EXECUTABLE=$(which python3)
        cmake --build . -- -j4  

    - name: LibCI
      # Note: requires BUILD_UNIT_TESTS or the executable C++ unit-tests won't run (and it won't complain)
      shell: bash
      run: |
        python3 unit-tests/run-unit-tests.py --no-color --debug --stdout --not-live --context "linux"


  #--------------------------------------------------------------------------------
  U20_ST_Py_DDS_RSUSB_CI:  # Ubuntu 2020, Static, Python, DDS, RSUSB, LibCI without executables
    runs-on: ubuntu-20.04
    timeout-minutes: 60
    steps:
    - uses: actions/checkout@v3

    - name: Prebuild
      shell: bash
      run: |
        sudo apt-get update;
        sudo apt-get install -qq build-essential xorg-dev libgl1-mesa-dev libglu1-mesa-dev libglew-dev libglm-dev;
        sudo apt-get install -qq libusb-1.0-0-dev;
        sudo apt-get install -qq libgtk-3-dev;
        sudo apt-get install libglfw3-dev libglfw3;
        # We force compiling with GCC 7 because the default installed GCC 9 compiled with LTO and gives an internal compiler error
        sudo apt-get install gcc-7 g++-7;
        sudo update-alternatives --install /usr/bin/gcc gcc /usr/bin/gcc-7 60 --slave /usr/bin/g++ g++ /usr/bin/g++-7;
        python3 -m pip install numpy

    - name: Check_API
      shell: bash
      run: |
        cd scripts
        ./api_check.sh
        ./pr_check.sh
        cd ..
        mkdir build

    - name: Build
      # Note: we force RSUSB because, on Linux, the context creation will fail on GHA:
      #     (backend-v4l2.cpp:555) Cannot access /sys/class/video4linux)
      # And, well, we don't need any specific platform for DDS!
      shell: bash
      run: |
        cd build
        cmake .. -DCMAKE_BUILD_TYPE=${{env.LRS_RUN_CONFIG}} -DBUILD_SHARED_LIBS=false -DBUILD_EXAMPLES=false -DBUILD_TOOLS=false -DBUILD_UNIT_TESTS=false -DCHECK_FOR_UPDATES=false -DBUILD_WITH_DDS=true -DBUILD_PYTHON_BINDINGS=true -DPYTHON_EXECUTABLE=$(which python3) -DFORCE_RSUSB_BACKEND=true
        cmake --build . -- -j4  

    - name: LibCI
      # Note: we specifically disable BUILD_UNIT_TESTS so the executable C++ unit-tests won't run
      # This is to save time as DDS already lengthens the build...
      shell: bash
      run: |
        python3 unit-tests/run-unit-tests.py --no-color --debug --stdout --not-live --context "dds linux" --tag dds
  

  #--------------------------------------------------------------------------------
  U22_SH_RSUSB_LiveTest:  # Ubuntu 2022, Shared, Legacy live-tests
    runs-on: ubuntu-22.04     
    timeout-minutes: 60
    env: 
      LRS_BUILD_NODEJS: true
    steps:
    - uses: actions/checkout@v3   
          
    - name: Check_API
      shell: bash
      run: |
        cd scripts
        ./api_check.sh
        cd ..  
        
    - name: Prebuild
      shell: bash
      run: |
        set -x
        
        mkdir build
        sudo apt-get update;
        sudo apt-get install -qq build-essential xorg-dev libgl1-mesa-dev libglu1-mesa-dev libglew-dev libglm-dev;
        sudo apt-get install -qq libusb-1.0-0-dev;
        sudo apt-get install -qq libgtk-3-dev;
        sudo apt-get install libglfw3-dev libglfw3;

    - name: Build
      shell: bash
      run: | 
        cd build
        cmake .. -DCMAKE_BUILD_TYPE=${{env.LRS_BUILD_CONFIG}} -DBUILD_SHARED_LIBS=true -DBUILD_EXAMPLES=false -DBUILD_TOOLS=false -DCHECK_FOR_UPDATES=false -DFORCE_RSUSB_BACKEND=true -DBUILD_LEGACY_LIVE_TEST=true
        cmake --build . -- -j4

    - name: Test
      shell: bash
      id: test-step
      # We set continue-on-error: true as a workaround for not skipping the upload log step on failure,
      # The final step will check the return value from the test step and decide if to fail/pass the job
      continue-on-error: true 
      run: | 
        export LRS_LOG_LEVEL="DEBUG";
        cd build/${{env.LRS_BUILD_CONFIG}}/
        ./live-test -d yes -i [software-device]

    - name: Upload RS log artifact
      uses: actions/upload-artifact@v3
      with:
        name: Log file - U22_SH_RSUSB_LiveTest
        path: build/*.log

    - name: Provide correct exit status for job 
      shell: bash
      run: |
        if [ ${{steps.test-step.outcome}} = "failure" ];then
           echo "Test step failed, please open it to view the reported issue"
           exit 1
        else
           exit 0
        fi


  #--------------------------------------------------------------------------------
  Mac_cpp:
    runs-on: macos-11
    timeout-minutes: 60
    
    steps:
    - uses: actions/checkout@v3

    - name: Check_API
      shell: bash
      run: |
        cd scripts
        ./api_check.sh
        cd ..

    - name: Prebuild
      run: |
        mkdir build
        # install coreutils for greadlink use
        brew install coreutils
        brew install homebrew/core/glfw3;
        brew list libusb || brew install libusb;
        
    - name: Build
      run: |
        cd build
        # `OPENSSL_ROOT_DIR` setting is Used by libcurl for 'CHECK_FOR_UPDATES' capability
        # We use "greadlink -f" which is mac-os parallel command to "readlink -f" from Linux (-f to convert relative link to absolute link)
        export OPENSSL_ROOT_DIR=`greadlink -f /usr/local/opt/openssl@1.1`        
        echo "OPENSSL_ROOT_DIR = ${OPENSSL_ROOT_DIR}"
        cmake .. -DCMAKE_BUILD_TYPE=${{env.LRS_BUILD_CONFIG}} -DBUILD_EXAMPLES=true -DBUILD_WITH_OPENMP=false -DHWM_OVER_XU=false -DCHECK_FOR_UPDATES=true
        cmake --build . -- -j4
        ls


  #--------------------------------------------------------------------------------
  Android_cpp:
    runs-on: ubuntu-20.04   
    timeout-minutes: 60
    steps:
    - uses: actions/checkout@v3

    - name: Check_API
      shell: bash
      run: |
        cd scripts
        ./api_check.sh
        cd ..
    - name: Prebuild 
      shell: bash
      run: |
        mkdir build
        wget https://dl.google.com/android/repository/android-ndk-r20b-linux-x86_64.zip;
        unzip -q android-ndk-r20b-linux-x86_64.zip -d ./;
        sudo apt-get update;
        sudo apt-get install -qq build-essential xorg-dev libgl1-mesa-dev libglu1-mesa-dev libglew-dev libglm-dev;
        sudo apt-get install -qq libusb-1.0-0-dev;
        sudo apt-get install -qq libgtk-3-dev;
        sudo apt-get install libglfw3-dev libglfw3;
        # We force compiling with GCC 7 because the default installed GCC 9 compiled with LTO and gives an internal compiler error
        sudo apt-get install gcc-7 g++-7;
        sudo update-alternatives --install /usr/bin/gcc gcc /usr/bin/gcc-7 60 --slave /usr/bin/g++ g++ /usr/bin/g++-7;
        
        
    - name: Build
      run: |
       cd build
       cmake .. -DCMAKE_BUILD_TYPE=${{env.LRS_BUILD_CONFIG}} -DCMAKE_TOOLCHAIN_FILE=../android-ndk-r20b/build/cmake/android.toolchain.cmake -DFORCE_RSUSB_BACKEND=true
       cmake --build . -- -j4
       ls