Skip to content

Commit

Permalink
Move scarf seam and acceleration/deceleration to experimental
Browse files Browse the repository at this point in the history 
CURA-12077
  • Loading branch information
@wawanbreton
wawanbreton committed Oct 4, 2024
1 parent deda5b2 commit 1d28f7d
Showing 1 changed file with 105 additions and 105 deletions.
210 changes: 105 additions & 105 deletions resources/definitions/fdmprinter.def.json
View file
Original file line number Diff line number Diff line change
Expand Up @@ -1436,111 +1436,6 @@
"enabled": "z_seam_type == 'back'",
"limit_to_extruder": "wall_0_extruder_nr",
"settable_per_mesh": true
},
"scarf_joint_seam_length":
{
"label": "Scarf Seam Length",
"description": "When greater than 0, a scarf joint will be created on the Z seam to make it less visible.",
"type": "float",
"default_value": 0,
"minimum_value": "0",
"unit": "mm",
"limit_to_extruder": "wall_0_extruder_nr",
"settable_per_extruder": true,
"settable_per_mesh": true
},
"scarf_joint_seam_start_height_ratio":
{
"label": "Scarf Seam Start Height",
"description": "This is the ratio over the total layer height where the scarf joint seam will start.",
"type": "float",
"default_value": 0,
"minimum_value": 0,
"maximum_value": 100.0,
"unit": "%",
"limit_to_extruder": "wall_0_extruder_nr",
"settable_per_extruder": true,
"settable_per_mesh": true
},
"scarf_split_distance":
{
"label": "Scarf Seam Split Distance",
"description": "This is the maximum length of an extrusion path when splitting a longer path to apply the scarf seam. A smaller distance will create a more precise but also more verbose G-Code.",
"type": "float",
"default_value": 1.0,
"minimum_value": 0.1,
"maximum_value": 100.0,
"unit": "mm",
"limit_to_extruder": "wall_0_extruder_nr",
"settable_per_extruder": true,
"settable_per_mesh": true
},
"wall_0_start_speed_ratio":
{
"label": "Outer Wall Start Speed Ratio",
"description": "This is the ratio of the top speed to start with when printing an outer wall.",
"type": "float",
"default_value": 100.0,
"minimum_value": 0.0,
"maximum_value": 100.0,
"unit": "%",
"limit_to_extruder": "wall_0_extruder_nr",
"settable_per_extruder": true,
"settable_per_mesh": true
},
"wall_0_acceleration":
{
"label": "Outer Wall Acceleration",
"description": "This is the acceleration with which to reach the top speed when printing an outer wall.",
"enabled": "wall_0_start_speed_ratio < 100.0",
"type": "float",
"default_value": 20.0,
"minimum_value": 1.0,
"maximum_value": 1000.0,
"unit": "mm/s\u00b2",
"limit_to_extruder": "wall_0_extruder_nr",
"settable_per_extruder": true,
"settable_per_mesh": true
},
"wall_0_end_speed_ratio":
{
"label": "Outer Wall End Speed Ratio",
"description": "This is the ratio of the top speed to end with when printing an outer wall.",
"type": "float",
"default_value": 100.0,
"minimum_value": 0.0,
"maximum_value": 100.0,
"unit": "%",
"limit_to_extruder": "wall_0_extruder_nr",
"settable_per_extruder": true,
"settable_per_mesh": true
},
"wall_0_deceleration":
{
"label": "Outer Wall Deceleration",
"description": "This is the deceleration with which to end printing an outer wall.",
"enabled": "wall_0_end_speed_ratio < 100.0",
"type": "float",
"default_value": 20.0,
"minimum_value": 1.0,
"maximum_value": 1000.0,
"unit": "mm/s\u00b2",
"limit_to_extruder": "wall_0_extruder_nr",
"settable_per_extruder": true,
"settable_per_mesh": true
},
"wall_0_speed_split_distance":
{
"label": "Outer Wall Speed Split Distance",
"description": "This is the maximum length of an extrusion path when splitting a longer path to apply the outer wall acceleration/deceleration. A smaller distance will create a more precise but also more verbose G-Code.",
"type": "float",
"default_value": 1.0,
"minimum_value": 0.1,
"maximum_value": 100.0,
"unit": "mm",
"limit_to_extruder": "wall_0_extruder_nr",
"settable_per_extruder": true,
"settable_per_mesh": true
}
}
},
Expand Down Expand Up @@ -9028,6 +8923,111 @@
"type": "bool",
"default_value": true,
"settable_per_mesh": true
},
"scarf_joint_seam_length":
{
"label": "Scarf Seam Length",
"description": "When greater than 0, a scarf joint will be created on the Z seam to make it less visible.",
"type": "float",
"default_value": 0,
"minimum_value": "0",
"unit": "mm",
"limit_to_extruder": "wall_0_extruder_nr",
"settable_per_extruder": true,
"settable_per_mesh": true
},
"scarf_joint_seam_start_height_ratio":
{
"label": "Scarf Seam Start Height",
"description": "This is the ratio over the total layer height where the scarf joint seam will start.",
"type": "float",
"default_value": 0,
"minimum_value": 0,
"maximum_value": 100.0,
"unit": "%",
"limit_to_extruder": "wall_0_extruder_nr",
"settable_per_extruder": true,
"settable_per_mesh": true
},
"scarf_split_distance":
{
"label": "Scarf Seam Split Distance",
"description": "This is the maximum length of an extrusion path when splitting a longer path to apply the scarf seam. A smaller distance will create a more precise but also more verbose G-Code.",
"type": "float",
"default_value": 1.0,
"minimum_value": 0.1,
"maximum_value": 100.0,
"unit": "mm",
"limit_to_extruder": "wall_0_extruder_nr",
"settable_per_extruder": true,
"settable_per_mesh": true
},
"wall_0_start_speed_ratio":
{
"label": "Outer Wall Start Speed Ratio",
"description": "This is the ratio of the top speed to start with when printing an outer wall.",
"type": "float",
"default_value": 100.0,
"minimum_value": 0.0,
"maximum_value": 100.0,
"unit": "%",
"limit_to_extruder": "wall_0_extruder_nr",
"settable_per_extruder": true,
"settable_per_mesh": true
},
"wall_0_acceleration":
{
"label": "Outer Wall Acceleration",
"description": "This is the acceleration with which to reach the top speed when printing an outer wall.",
"enabled": "wall_0_start_speed_ratio < 100.0",
"type": "float",
"default_value": 20.0,
"minimum_value": 1.0,
"maximum_value": 1000.0,
"unit": "mm/s\u00b2",
"limit_to_extruder": "wall_0_extruder_nr",
"settable_per_extruder": true,
"settable_per_mesh": true
},
"wall_0_end_speed_ratio":
{
"label": "Outer Wall End Speed Ratio",
"description": "This is the ratio of the top speed to end with when printing an outer wall.",
"type": "float",
"default_value": 100.0,
"minimum_value": 0.0,
"maximum_value": 100.0,
"unit": "%",
"limit_to_extruder": "wall_0_extruder_nr",
"settable_per_extruder": true,
"settable_per_mesh": true
},
"wall_0_deceleration":
{
"label": "Outer Wall Deceleration",
"description": "This is the deceleration with which to end printing an outer wall.",
"enabled": "wall_0_end_speed_ratio < 100.0",
"type": "float",
"default_value": 20.0,
"minimum_value": 1.0,
"maximum_value": 1000.0,
"unit": "mm/s\u00b2",
"limit_to_extruder": "wall_0_extruder_nr",
"settable_per_extruder": true,
"settable_per_mesh": true
},
"wall_0_speed_split_distance":
{
"label": "Outer Wall Speed Split Distance",
"description": "This is the maximum length of an extrusion path when splitting a longer path to apply the outer wall acceleration/deceleration. A smaller distance will create a more precise but also more verbose G-Code.",
"type": "float",
"default_value": 1.0,
"minimum_value": 0.1,
"maximum_value": 100.0,
"unit": "mm",
"limit_to_extruder": "wall_0_extruder_nr",
"settable_per_extruder": true,
"settable_per_mesh": true
}
}
},
Expand Down

0 comments on commit 1d28f7d

Please sign in to comment.