diff --git a/resources/definitions/fdmprinter.def.json b/resources/definitions/fdmprinter.def.json index a6c4ab02d9a..50c47395b52 100644 --- a/resources/definitions/fdmprinter.def.json +++ b/resources/definitions/fdmprinter.def.json @@ -1436,111 +1436,6 @@ "enabled": "z_seam_type == 'back'", "limit_to_extruder": "wall_0_extruder_nr", "settable_per_mesh": true - }, - "scarf_joint_seam_length": - { - "label": "Scarf Seam Length", - "description": "When greater than 0, a scarf joint will be created on the Z seam to make it less visible.", - "type": "float", - "default_value": 0, - "minimum_value": "0", - "unit": "mm", - "limit_to_extruder": "wall_0_extruder_nr", - "settable_per_extruder": true, - "settable_per_mesh": true - }, - "scarf_joint_seam_start_height_ratio": - { - "label": "Scarf Seam Start Height", - "description": "This is the ratio over the total layer height where the scarf joint seam will start.", - "type": "float", - "default_value": 0, - "minimum_value": 0, - "maximum_value": 100.0, - "unit": "%", - "limit_to_extruder": "wall_0_extruder_nr", - "settable_per_extruder": true, - "settable_per_mesh": true - }, - "scarf_split_distance": - { - "label": "Scarf Seam Split Distance", - "description": "This is the maximum length of an extrusion path when splitting a longer path to apply the scarf seam. A smaller distance will create a more precise but also more verbose G-Code.", - "type": "float", - "default_value": 1.0, - "minimum_value": 0.1, - "maximum_value": 100.0, - "unit": "mm", - "limit_to_extruder": "wall_0_extruder_nr", - "settable_per_extruder": true, - "settable_per_mesh": true - }, - "wall_0_start_speed_ratio": - { - "label": "Outer Wall Start Speed Ratio", - "description": "This is the ratio of the top speed to start with when printing an outer wall.", - "type": "float", - "default_value": 100.0, - "minimum_value": 0.0, - "maximum_value": 100.0, - "unit": "%", - "limit_to_extruder": "wall_0_extruder_nr", - "settable_per_extruder": true, - "settable_per_mesh": true - }, - "wall_0_acceleration": - { - "label": "Outer Wall Acceleration", - "description": "This is the acceleration with which to reach the top speed when printing an outer wall.", - "enabled": "wall_0_start_speed_ratio < 100.0", - "type": "float", - "default_value": 20.0, - "minimum_value": 1.0, - "maximum_value": 1000.0, - "unit": "mm/s\u00b2", - "limit_to_extruder": "wall_0_extruder_nr", - "settable_per_extruder": true, - "settable_per_mesh": true - }, - "wall_0_end_speed_ratio": - { - "label": "Outer Wall End Speed Ratio", - "description": "This is the ratio of the top speed to end with when printing an outer wall.", - "type": "float", - "default_value": 100.0, - "minimum_value": 0.0, - "maximum_value": 100.0, - "unit": "%", - "limit_to_extruder": "wall_0_extruder_nr", - "settable_per_extruder": true, - "settable_per_mesh": true - }, - "wall_0_deceleration": - { - "label": "Outer Wall Deceleration", - "description": "This is the deceleration with which to end printing an outer wall.", - "enabled": "wall_0_end_speed_ratio < 100.0", - "type": "float", - "default_value": 20.0, - "minimum_value": 1.0, - "maximum_value": 1000.0, - "unit": "mm/s\u00b2", - "limit_to_extruder": "wall_0_extruder_nr", - "settable_per_extruder": true, - "settable_per_mesh": true - }, - "wall_0_speed_split_distance": - { - "label": "Outer Wall Speed Split Distance", - "description": "This is the maximum length of an extrusion path when splitting a longer path to apply the outer wall acceleration/deceleration. A smaller distance will create a more precise but also more verbose G-Code.", - "type": "float", - "default_value": 1.0, - "minimum_value": 0.1, - "maximum_value": 100.0, - "unit": "mm", - "limit_to_extruder": "wall_0_extruder_nr", - "settable_per_extruder": true, - "settable_per_mesh": true } } }, @@ -9028,6 +8923,111 @@ "type": "bool", "default_value": true, "settable_per_mesh": true + }, + "scarf_joint_seam_length": + { + "label": "Scarf Seam Length", + "description": "When greater than 0, a scarf joint will be created on the Z seam to make it less visible.", + "type": "float", + "default_value": 0, + "minimum_value": "0", + "unit": "mm", + "limit_to_extruder": "wall_0_extruder_nr", + "settable_per_extruder": true, + "settable_per_mesh": true + }, + "scarf_joint_seam_start_height_ratio": + { + "label": "Scarf Seam Start Height", + "description": "This is the ratio over the total layer height where the scarf joint seam will start.", + "type": "float", + "default_value": 0, + "minimum_value": 0, + "maximum_value": 100.0, + "unit": "%", + "limit_to_extruder": "wall_0_extruder_nr", + "settable_per_extruder": true, + "settable_per_mesh": true + }, + "scarf_split_distance": + { + "label": "Scarf Seam Split Distance", + "description": "This is the maximum length of an extrusion path when splitting a longer path to apply the scarf seam. A smaller distance will create a more precise but also more verbose G-Code.", + "type": "float", + "default_value": 1.0, + "minimum_value": 0.1, + "maximum_value": 100.0, + "unit": "mm", + "limit_to_extruder": "wall_0_extruder_nr", + "settable_per_extruder": true, + "settable_per_mesh": true + }, + "wall_0_start_speed_ratio": + { + "label": "Outer Wall Start Speed Ratio", + "description": "This is the ratio of the top speed to start with when printing an outer wall.", + "type": "float", + "default_value": 100.0, + "minimum_value": 0.0, + "maximum_value": 100.0, + "unit": "%", + "limit_to_extruder": "wall_0_extruder_nr", + "settable_per_extruder": true, + "settable_per_mesh": true + }, + "wall_0_acceleration": + { + "label": "Outer Wall Acceleration", + "description": "This is the acceleration with which to reach the top speed when printing an outer wall.", + "enabled": "wall_0_start_speed_ratio < 100.0", + "type": "float", + "default_value": 20.0, + "minimum_value": 1.0, + "maximum_value": 1000.0, + "unit": "mm/s\u00b2", + "limit_to_extruder": "wall_0_extruder_nr", + "settable_per_extruder": true, + "settable_per_mesh": true + }, + "wall_0_end_speed_ratio": + { + "label": "Outer Wall End Speed Ratio", + "description": "This is the ratio of the top speed to end with when printing an outer wall.", + "type": "float", + "default_value": 100.0, + "minimum_value": 0.0, + "maximum_value": 100.0, + "unit": "%", + "limit_to_extruder": "wall_0_extruder_nr", + "settable_per_extruder": true, + "settable_per_mesh": true + }, + "wall_0_deceleration": + { + "label": "Outer Wall Deceleration", + "description": "This is the deceleration with which to end printing an outer wall.", + "enabled": "wall_0_end_speed_ratio < 100.0", + "type": "float", + "default_value": 20.0, + "minimum_value": 1.0, + "maximum_value": 1000.0, + "unit": "mm/s\u00b2", + "limit_to_extruder": "wall_0_extruder_nr", + "settable_per_extruder": true, + "settable_per_mesh": true + }, + "wall_0_speed_split_distance": + { + "label": "Outer Wall Speed Split Distance", + "description": "This is the maximum length of an extrusion path when splitting a longer path to apply the outer wall acceleration/deceleration. A smaller distance will create a more precise but also more verbose G-Code.", + "type": "float", + "default_value": 1.0, + "minimum_value": 0.1, + "maximum_value": 100.0, + "unit": "mm", + "limit_to_extruder": "wall_0_extruder_nr", + "settable_per_extruder": true, + "settable_per_mesh": true } } },