diff --git a/generic_abs.xml.fdm_material b/generic_abs.xml.fdm_material
index a45ef2b19..46c0aaf66 100644
--- a/generic_abs.xml.fdm_material
+++ b/generic_abs.xml.fdm_material
@@ -35,7 +35,6 @@ Generic ABS profile. The data in this file may not be correct for your specific
         <machine>
             <machine_identifier manufacturer="Ultimaker B.V." product="Ultimaker 3"/>
             <machine_identifier manufacturer="Ultimaker B.V." product="Ultimaker 3 Extended"/>
-            <setting key="print cooling">5</setting>
             <hotend id="BB 0.4" />
             <hotend id="BB 0.8" />
             <hotend id="AA 0.25">
@@ -46,6 +45,7 @@ Generic ABS profile. The data in this file may not be correct for your specific
             </hotend>
             <hotend id="AA 0.8">
                 <setting key="hardware compatible">yes</setting>
+                <setting key="heated bed temperature">90</setting>
             </hotend>
         </machine>
                 
diff --git a/generic_cpe.xml.fdm_material b/generic_cpe.xml.fdm_material
index 920bc9b02..b10007176 100644
--- a/generic_cpe.xml.fdm_material
+++ b/generic_cpe.xml.fdm_material
@@ -45,6 +45,7 @@ Generic CPE profile. The data in this file may not be correct for your specific
             </hotend>
             <hotend id="AA 0.8">
                 <setting key="hardware compatible">yes</setting>
+                <setting key="heated bed temperature">80</setting>
             </hotend>
         </machine>
     </settings>
diff --git a/generic_cpe_plus.xml.fdm_material b/generic_cpe_plus.xml.fdm_material
index 75a208225..3c58b3aca 100644
--- a/generic_cpe_plus.xml.fdm_material
+++ b/generic_cpe_plus.xml.fdm_material
@@ -42,6 +42,8 @@ Generic CPE+ profile. The data in this file may not be correct for your specific
             <hotend id="BB 0.4" />
             <hotend id="AA 0.4">
                 <setting key="hardware compatible">yes</setting>
+                <setting key="retraction amount">7</setting>
+                <setting key="print cooling">1</setting>
             </hotend>
             <hotend id="BB 0.8" />
             <hotend id="AA 0.8">
diff --git a/generic_nylon.xml.fdm_material b/generic_nylon.xml.fdm_material
index 6e1e1ee74..0c10944b9 100644
--- a/generic_nylon.xml.fdm_material
+++ b/generic_nylon.xml.fdm_material
@@ -38,6 +38,7 @@ Generic Nylon profile. The data in this file may not be correct for your specifi
             </hotend>
             <hotend id="AA 0.8">
                 <setting key="hardware compatible">yes</setting>
+                <setting key="retraction speed">45</setting>
             </hotend>
         </machine>
         <machine>
diff --git a/generic_pc.xml.fdm_material b/generic_pc.xml.fdm_material
index a6bdd1d72..2e933f00a 100644
--- a/generic_pc.xml.fdm_material
+++ b/generic_pc.xml.fdm_material
@@ -41,6 +41,9 @@ Generic PC profile. The data in this file may not be correct for your specific m
             <hotend id="BB 0.4" />
             <hotend id="AA 0.4">
                 <setting key="hardware compatible">yes</setting>
+                <setting key="print cooling">0</setting>
+                <setting key="retraction amount">8</setting>
+                <setting key="retraction speed">35</setting>
             </hotend>
             <hotend id="BB 0.8" />
             <hotend id="AA 0.8">
diff --git a/generic_tpu.xml.fdm_material b/generic_tpu.xml.fdm_material
index daf59db1c..d860b8ab9 100644
--- a/generic_tpu.xml.fdm_material
+++ b/generic_tpu.xml.fdm_material
@@ -42,11 +42,14 @@ Generic TPU 95A profile. The data in this file may not be correct for your speci
             <hotend id="BB 0.4" />
             <hotend id="AA 0.4">
                 <setting key="hardware compatible">yes</setting>
+                <setting key="print cooling">20</setting>
+                <setting key="retraction speed">35</setting>
             </hotend>
             <hotend id="BB 0.8" />
             <hotend id="AA 0.8">
                 <setting key="hardware compatible">yes</setting>
-            </hotend>			
-        </machine>		
+                <setting key="retraction speed">45</setting>
+            </hotend>
+        </machine>
     </settings>
 </fdmmaterial>
diff --git a/ultimaker_abs_black.xml.fdm_material b/ultimaker_abs_black.xml.fdm_material
index fc1fe49d7..7152c65d9 100644
--- a/ultimaker_abs_black.xml.fdm_material
+++ b/ultimaker_abs_black.xml.fdm_material
@@ -31,10 +31,10 @@ Automatically generated ABS profile. Data in this file may not be not correct.
             <hotend id="0.6 mm" />
             <hotend id="0.8 mm" />
         </machine>
+
         <machine>
             <machine_identifier manufacturer="Ultimaker B.V." product="Ultimaker 3"/>
             <machine_identifier manufacturer="Ultimaker B.V." product="Ultimaker 3 Extended"/>
-            <setting key="print cooling">5</setting>
             <hotend id="BB 0.4" />
             <hotend id="BB 0.8" />
             <hotend id="AA 0.25">
@@ -45,6 +45,7 @@ Automatically generated ABS profile. Data in this file may not be not correct.
             </hotend>
             <hotend id="AA 0.8">
                 <setting key="hardware compatible">yes</setting>
+                <setting key="heated bed temperature">90</setting>
             </hotend>
         </machine>
     </settings>
diff --git a/ultimaker_abs_blue.xml.fdm_material b/ultimaker_abs_blue.xml.fdm_material
index 59870b775..bb42f71f3 100644
--- a/ultimaker_abs_blue.xml.fdm_material
+++ b/ultimaker_abs_blue.xml.fdm_material
@@ -31,10 +31,10 @@ Automatically generated ABS profile. Data in this file may not be not correct.
             <hotend id="0.6 mm" />
             <hotend id="0.8 mm" />
         </machine>
+
         <machine>
             <machine_identifier manufacturer="Ultimaker B.V." product="Ultimaker 3"/>
             <machine_identifier manufacturer="Ultimaker B.V." product="Ultimaker 3 Extended"/>
-            <setting key="print cooling">5</setting>
             <hotend id="BB 0.4" />
             <hotend id="BB 0.8" />
             <hotend id="AA 0.25">
@@ -45,6 +45,7 @@ Automatically generated ABS profile. Data in this file may not be not correct.
             </hotend>
             <hotend id="AA 0.8">
                 <setting key="hardware compatible">yes</setting>
+                <setting key="heated bed temperature">90</setting>
             </hotend>
         </machine>
     </settings>
diff --git a/ultimaker_abs_green.xml.fdm_material b/ultimaker_abs_green.xml.fdm_material
index 9847b93e0..164b34992 100644
--- a/ultimaker_abs_green.xml.fdm_material
+++ b/ultimaker_abs_green.xml.fdm_material
@@ -31,10 +31,10 @@ Automatically generated ABS profile. Data in this file may not be not correct.
             <hotend id="0.6 mm" />
             <hotend id="0.8 mm" />
         </machine>
+
         <machine>
             <machine_identifier manufacturer="Ultimaker B.V." product="Ultimaker 3"/>
             <machine_identifier manufacturer="Ultimaker B.V." product="Ultimaker 3 Extended"/>
-            <setting key="print cooling">5</setting>
             <hotend id="BB 0.4" />
             <hotend id="BB 0.8" />
             <hotend id="AA 0.25">
@@ -45,6 +45,7 @@ Automatically generated ABS profile. Data in this file may not be not correct.
             </hotend>
             <hotend id="AA 0.8">
                 <setting key="hardware compatible">yes</setting>
+                <setting key="heated bed temperature">90</setting>
             </hotend>
         </machine>
     </settings>
diff --git a/ultimaker_abs_grey.xml.fdm_material b/ultimaker_abs_grey.xml.fdm_material
index 2802509bc..29ab3367c 100644
--- a/ultimaker_abs_grey.xml.fdm_material
+++ b/ultimaker_abs_grey.xml.fdm_material
@@ -31,10 +31,10 @@ Automatically generated ABS profile. Data in this file may not be not correct.
             <hotend id="0.6 mm" />
             <hotend id="0.8 mm" />
         </machine>
+
         <machine>
             <machine_identifier manufacturer="Ultimaker B.V." product="Ultimaker 3"/>
             <machine_identifier manufacturer="Ultimaker B.V." product="Ultimaker 3 Extended"/>
-            <setting key="print cooling">5</setting>
             <hotend id="BB 0.4" />
             <hotend id="BB 0.8" />
             <hotend id="AA 0.25">
@@ -45,6 +45,7 @@ Automatically generated ABS profile. Data in this file may not be not correct.
             </hotend>
             <hotend id="AA 0.8">
                 <setting key="hardware compatible">yes</setting>
+                <setting key="heated bed temperature">90</setting>
             </hotend>
         </machine>
     </settings>
diff --git a/ultimaker_abs_orange.xml.fdm_material b/ultimaker_abs_orange.xml.fdm_material
index ea9711eda..2ba1609ea 100644
--- a/ultimaker_abs_orange.xml.fdm_material
+++ b/ultimaker_abs_orange.xml.fdm_material
@@ -31,10 +31,10 @@ Automatically generated ABS profile. Data in this file may not be not correct.
             <hotend id="0.6 mm" />
             <hotend id="0.8 mm" />
         </machine>
+
         <machine>
             <machine_identifier manufacturer="Ultimaker B.V." product="Ultimaker 3"/>
             <machine_identifier manufacturer="Ultimaker B.V." product="Ultimaker 3 Extended"/>
-            <setting key="print cooling">5</setting>
             <hotend id="BB 0.4" />
             <hotend id="BB 0.8" />
             <hotend id="AA 0.25">
@@ -45,6 +45,7 @@ Automatically generated ABS profile. Data in this file may not be not correct.
             </hotend>
             <hotend id="AA 0.8">
                 <setting key="hardware compatible">yes</setting>
+                <setting key="heated bed temperature">90</setting>
             </hotend>
         </machine>
     </settings>
diff --git a/ultimaker_abs_pearl-gold.xml.fdm_material b/ultimaker_abs_pearl-gold.xml.fdm_material
index 7f77816d1..6c2f52ba0 100644
--- a/ultimaker_abs_pearl-gold.xml.fdm_material
+++ b/ultimaker_abs_pearl-gold.xml.fdm_material
@@ -31,10 +31,10 @@ Automatically generated ABS profile. Data in this file may not be not correct.
             <hotend id="0.6 mm" />
             <hotend id="0.8 mm" />
         </machine>
+
         <machine>
             <machine_identifier manufacturer="Ultimaker B.V." product="Ultimaker 3"/>
             <machine_identifier manufacturer="Ultimaker B.V." product="Ultimaker 3 Extended"/>
-            <setting key="print cooling">5</setting>
             <hotend id="BB 0.4" />
             <hotend id="BB 0.8" />
             <hotend id="AA 0.25">
@@ -45,6 +45,7 @@ Automatically generated ABS profile. Data in this file may not be not correct.
             </hotend>
             <hotend id="AA 0.8">
                 <setting key="hardware compatible">yes</setting>
+                <setting key="heated bed temperature">90</setting>
             </hotend>
         </machine>
     </settings>
diff --git a/ultimaker_abs_red.xml.fdm_material b/ultimaker_abs_red.xml.fdm_material
index b6d23c1d3..8ee1f12ee 100644
--- a/ultimaker_abs_red.xml.fdm_material
+++ b/ultimaker_abs_red.xml.fdm_material
@@ -31,10 +31,10 @@ Automatically generated ABS profile. Data in this file may not be not correct.
             <hotend id="0.6 mm" />
             <hotend id="0.8 mm" />
         </machine>
+
         <machine>
             <machine_identifier manufacturer="Ultimaker B.V." product="Ultimaker 3"/>
             <machine_identifier manufacturer="Ultimaker B.V." product="Ultimaker 3 Extended"/>
-            <setting key="print cooling">5</setting>
             <hotend id="BB 0.4" />
             <hotend id="BB 0.8" />
             <hotend id="AA 0.25">
@@ -45,6 +45,7 @@ Automatically generated ABS profile. Data in this file may not be not correct.
             </hotend>
             <hotend id="AA 0.8">
                 <setting key="hardware compatible">yes</setting>
+                <setting key="heated bed temperature">90</setting>
             </hotend>
         </machine>
     </settings>
diff --git a/ultimaker_abs_silver-metallic.xml.fdm_material b/ultimaker_abs_silver-metallic.xml.fdm_material
index 18357463c..ace6fd553 100644
--- a/ultimaker_abs_silver-metallic.xml.fdm_material
+++ b/ultimaker_abs_silver-metallic.xml.fdm_material
@@ -31,10 +31,10 @@ Automatically generated ABS profile. Data in this file may not be not correct.
             <hotend id="0.6 mm" />
             <hotend id="0.8 mm" />
         </machine>
+
         <machine>
             <machine_identifier manufacturer="Ultimaker B.V." product="Ultimaker 3"/>
             <machine_identifier manufacturer="Ultimaker B.V." product="Ultimaker 3 Extended"/>
-            <setting key="print cooling">5</setting>
             <hotend id="BB 0.4" />
             <hotend id="BB 0.8" />
             <hotend id="AA 0.25">
@@ -45,6 +45,7 @@ Automatically generated ABS profile. Data in this file may not be not correct.
             </hotend>
             <hotend id="AA 0.8">
                 <setting key="hardware compatible">yes</setting>
+                <setting key="heated bed temperature">90</setting>
             </hotend>
         </machine>
     </settings>
diff --git a/ultimaker_abs_white.xml.fdm_material b/ultimaker_abs_white.xml.fdm_material
index fbe1efabf..c588da248 100644
--- a/ultimaker_abs_white.xml.fdm_material
+++ b/ultimaker_abs_white.xml.fdm_material
@@ -31,10 +31,10 @@ Automatically generated ABS profile. Data in this file may not be not correct.
             <hotend id="0.6 mm" />
             <hotend id="0.8 mm" />
         </machine>
+
         <machine>
             <machine_identifier manufacturer="Ultimaker B.V." product="Ultimaker 3"/>
             <machine_identifier manufacturer="Ultimaker B.V." product="Ultimaker 3 Extended"/>
-            <setting key="print cooling">5</setting>
             <hotend id="BB 0.4" />
             <hotend id="BB 0.8" />
             <hotend id="AA 0.25">
@@ -45,6 +45,7 @@ Automatically generated ABS profile. Data in this file may not be not correct.
             </hotend>
             <hotend id="AA 0.8">
                 <setting key="hardware compatible">yes</setting>
+                <setting key="heated bed temperature">90</setting>
             </hotend>
         </machine>
     </settings>
diff --git a/ultimaker_abs_yellow.xml.fdm_material b/ultimaker_abs_yellow.xml.fdm_material
index baf50799f..2a1388138 100644
--- a/ultimaker_abs_yellow.xml.fdm_material
+++ b/ultimaker_abs_yellow.xml.fdm_material
@@ -31,6 +31,7 @@ Automatically generated ABS profile. Data in this file may not be not correct.
             <hotend id="0.6 mm" />
             <hotend id="0.8 mm" />
         </machine>
+
         <machine>
             <machine_identifier manufacturer="Ultimaker B.V." product="Ultimaker 3"/>
             <machine_identifier manufacturer="Ultimaker B.V." product="Ultimaker 3 Extended"/>
@@ -45,6 +46,7 @@ Automatically generated ABS profile. Data in this file may not be not correct.
             </hotend>
             <hotend id="AA 0.8">
                 <setting key="hardware compatible">yes</setting>
+                <setting key="heated bed temperature">90</setting>
             </hotend>
         </machine>
     </settings>
diff --git a/ultimaker_cpe_black.xml.fdm_material b/ultimaker_cpe_black.xml.fdm_material
index 54f9c4bfc..5e8d1587b 100644
--- a/ultimaker_cpe_black.xml.fdm_material
+++ b/ultimaker_cpe_black.xml.fdm_material
@@ -31,6 +31,7 @@ Automatically generated CPE profile. Data in this file may not be not correct.
             <hotend id="0.6 mm" />
             <hotend id="0.8 mm" />
         </machine>
+
         <machine>
             <machine_identifier manufacturer="Ultimaker B.V." product="Ultimaker 3"/>
             <machine_identifier manufacturer="Ultimaker B.V." product="Ultimaker 3 Extended"/>
@@ -44,6 +45,7 @@ Automatically generated CPE profile. Data in this file may not be not correct.
             </hotend>
             <hotend id="AA 0.8">
                 <setting key="hardware compatible">yes</setting>
+                <setting key="heated bed temperature">80</setting>
             </hotend>
         </machine>
     </settings>
diff --git a/ultimaker_cpe_blue.xml.fdm_material b/ultimaker_cpe_blue.xml.fdm_material
index 3d60aeba8..aa26bcf67 100644
--- a/ultimaker_cpe_blue.xml.fdm_material
+++ b/ultimaker_cpe_blue.xml.fdm_material
@@ -31,6 +31,7 @@ Automatically generated CPE profile. Data in this file may not be not correct.
             <hotend id="0.6 mm" />
             <hotend id="0.8 mm" />
         </machine>
+
         <machine>
             <machine_identifier manufacturer="Ultimaker B.V." product="Ultimaker 3"/>
             <machine_identifier manufacturer="Ultimaker B.V." product="Ultimaker 3 Extended"/>
@@ -44,6 +45,7 @@ Automatically generated CPE profile. Data in this file may not be not correct.
             </hotend>
             <hotend id="AA 0.8">
                 <setting key="hardware compatible">yes</setting>
+                <setting key="heated bed temperature">80</setting>
             </hotend>
         </machine>
     </settings>
diff --git a/ultimaker_cpe_dark-grey.xml.fdm_material b/ultimaker_cpe_dark-grey.xml.fdm_material
index 690d963dc..7f27795d6 100644
--- a/ultimaker_cpe_dark-grey.xml.fdm_material
+++ b/ultimaker_cpe_dark-grey.xml.fdm_material
@@ -31,6 +31,7 @@ Automatically generated CPE profile. Data in this file may not be not correct.
             <hotend id="0.6 mm" />
             <hotend id="0.8 mm" />
         </machine>
+
         <machine>
             <machine_identifier manufacturer="Ultimaker B.V." product="Ultimaker 3"/>
             <machine_identifier manufacturer="Ultimaker B.V." product="Ultimaker 3 Extended"/>
@@ -44,6 +45,7 @@ Automatically generated CPE profile. Data in this file may not be not correct.
             </hotend>
             <hotend id="AA 0.8">
                 <setting key="hardware compatible">yes</setting>
+                <setting key="heated bed temperature">80</setting>
             </hotend>
         </machine>
     </settings>
diff --git a/ultimaker_cpe_green.xml.fdm_material b/ultimaker_cpe_green.xml.fdm_material
index 9efa27f89..bb980b883 100644
--- a/ultimaker_cpe_green.xml.fdm_material
+++ b/ultimaker_cpe_green.xml.fdm_material
@@ -31,6 +31,7 @@ Automatically generated CPE profile. Data in this file may not be not correct.
             <hotend id="0.6 mm" />
             <hotend id="0.8 mm" />
         </machine>
+
         <machine>
             <machine_identifier manufacturer="Ultimaker B.V." product="Ultimaker 3"/>
             <machine_identifier manufacturer="Ultimaker B.V." product="Ultimaker 3 Extended"/>
@@ -44,6 +45,7 @@ Automatically generated CPE profile. Data in this file may not be not correct.
             </hotend>
             <hotend id="AA 0.8">
                 <setting key="hardware compatible">yes</setting>
+                <setting key="heated bed temperature">80</setting>
             </hotend>
         </machine>
     </settings>
diff --git a/ultimaker_cpe_light-grey.xml.fdm_material b/ultimaker_cpe_light-grey.xml.fdm_material
index 768aaa358..7de25e074 100644
--- a/ultimaker_cpe_light-grey.xml.fdm_material
+++ b/ultimaker_cpe_light-grey.xml.fdm_material
@@ -31,6 +31,7 @@ Automatically generated CPE profile. Data in this file may not be not correct.
             <hotend id="0.6 mm" />
             <hotend id="0.8 mm" />
         </machine>
+
         <machine>
             <machine_identifier manufacturer="Ultimaker B.V." product="Ultimaker 3"/>
             <machine_identifier manufacturer="Ultimaker B.V." product="Ultimaker 3 Extended"/>
@@ -44,6 +45,7 @@ Automatically generated CPE profile. Data in this file may not be not correct.
             </hotend>
             <hotend id="AA 0.8">
                 <setting key="hardware compatible">yes</setting>
+                <setting key="heated bed temperature">80</setting>
             </hotend>
         </machine>
     </settings>
diff --git a/ultimaker_cpe_plus_black.xml.fdm_material b/ultimaker_cpe_plus_black.xml.fdm_material
index 0b115427e..8a2b19d32 100755
--- a/ultimaker_cpe_plus_black.xml.fdm_material
+++ b/ultimaker_cpe_plus_black.xml.fdm_material
@@ -20,7 +20,7 @@ Generic CPE+ profile. Serves as an example file, data in this file is not correc
     <settings>
         <setting key="hardware compatible">no</setting><!-- This material is not supported on most printers due to high temperatures -->
         <setting key="print temperature">260</setting>
-        <setting key="heated bed temperature">110</setting>
+        <setting key="heated bed temperature">107</setting>
         <setting key="standby temperature">175</setting>
 
         <machine>
@@ -45,6 +45,8 @@ Generic CPE+ profile. Serves as an example file, data in this file is not correc
             </hotend>
             <hotend id="AA 0.4">
                 <setting key="hardware compatible">yes</setting>
+                <setting key="retraction amount">7</setting>
+                <setting key="print cooling">1</setting>
             </hotend>
             <hotend id="AA 0.8">
                 <setting key="hardware compatible">yes</setting>
diff --git a/ultimaker_cpe_plus_transparent.xml.fdm_material b/ultimaker_cpe_plus_transparent.xml.fdm_material
index b183ecdd4..2aeb48d4d 100644
--- a/ultimaker_cpe_plus_transparent.xml.fdm_material
+++ b/ultimaker_cpe_plus_transparent.xml.fdm_material
@@ -20,7 +20,7 @@ Generic CPE+ profile. Serves as an example file, data in this file is not correc
     <settings>
         <setting key="hardware compatible">no</setting><!-- This material is not supported on most printers due to high temperatures -->
         <setting key="print temperature">260</setting>
-        <setting key="heated bed temperature">110</setting>
+        <setting key="heated bed temperature">107</setting>
         <setting key="standby temperature">175</setting>
 
         <machine>
@@ -45,6 +45,8 @@ Generic CPE+ profile. Serves as an example file, data in this file is not correc
             </hotend>
             <hotend id="AA 0.4">
                 <setting key="hardware compatible">yes</setting>
+                <setting key="retraction amount">7</setting>
+                <setting key="print cooling">1</setting>
             </hotend>
             <hotend id="AA 0.8">
                 <setting key="hardware compatible">yes</setting>
diff --git a/ultimaker_cpe_plus_white.xml.fdm_material b/ultimaker_cpe_plus_white.xml.fdm_material
index 2b834aeed..15a8e9fb9 100644
--- a/ultimaker_cpe_plus_white.xml.fdm_material
+++ b/ultimaker_cpe_plus_white.xml.fdm_material
@@ -20,7 +20,7 @@ Generic CPE+ profile. Serves as an example file, data in this file is not correc
     <settings>
         <setting key="hardware compatible">no</setting><!-- This material is not supported on most printers due to high temperatures -->
         <setting key="print temperature">260</setting>
-        <setting key="heated bed temperature">110</setting>
+        <setting key="heated bed temperature">107</setting>
         <setting key="standby temperature">175</setting>
 
         <machine>
@@ -45,6 +45,8 @@ Generic CPE+ profile. Serves as an example file, data in this file is not correc
             </hotend>
             <hotend id="AA 0.4">
                 <setting key="hardware compatible">yes</setting>
+                <setting key="retraction amount">7</setting>
+                <setting key="print cooling">1</setting>
             </hotend>
             <hotend id="AA 0.8">
                 <setting key="hardware compatible">yes</setting>
diff --git a/ultimaker_nylon_black.xml.fdm_material b/ultimaker_nylon_black.xml.fdm_material
index 0216052e6..afed1bc04 100644
--- a/ultimaker_nylon_black.xml.fdm_material
+++ b/ultimaker_nylon_black.xml.fdm_material
@@ -33,6 +33,7 @@ Generic Nylon profile. Serves as an example file, data in this file is not corre
             <hotend id="0.6 mm" />
             <hotend id="0.8 mm" />
         </machine>
+
         <machine>
             <machine_identifier manufacturer="Ultimaker B.V." product="Ultimaker 3"/>
             <machine_identifier manufacturer="Ultimaker B.V." product="Ultimaker 3 Extended"/>
@@ -47,6 +48,7 @@ Generic Nylon profile. Serves as an example file, data in this file is not corre
             </hotend>
             <hotend id="AA 0.8">
                 <setting key="hardware compatible">yes</setting>
+                <setting key="retraction speed">45</setting>
             </hotend>
         </machine>
     </settings>
diff --git a/ultimaker_nylon_transparent.xml.fdm_material b/ultimaker_nylon_transparent.xml.fdm_material
index c7e5196e0..55a88a930 100644
--- a/ultimaker_nylon_transparent.xml.fdm_material
+++ b/ultimaker_nylon_transparent.xml.fdm_material
@@ -33,6 +33,7 @@ Generic Nylon profile. Serves as an example file, data in this file is not corre
             <hotend id="0.6 mm" />
             <hotend id="0.8 mm" />
         </machine>
+
         <machine>
             <machine_identifier manufacturer="Ultimaker B.V." product="Ultimaker 3"/>
             <machine_identifier manufacturer="Ultimaker B.V." product="Ultimaker 3 Extended"/>
@@ -47,6 +48,7 @@ Generic Nylon profile. Serves as an example file, data in this file is not corre
             </hotend>
             <hotend id="AA 0.8">
                 <setting key="hardware compatible">yes</setting>
+                <setting key="retraction speed">45</setting>
             </hotend>
         </machine>
     </settings>
diff --git a/ultimaker_pc_black.xml.fdm_material b/ultimaker_pc_black.xml.fdm_material
index 4a993b8ec..ea629883c 100755
--- a/ultimaker_pc_black.xml.fdm_material
+++ b/ultimaker_pc_black.xml.fdm_material
@@ -21,14 +21,15 @@ Generic PC profile. The data in this file may not be correct for your specific m
     </properties>
     <settings>
         <setting key="hardware compatible">no</setting><!-- This material is not supported on most printers due to high temperatures -->
-        <setting key="print temperature">260</setting>
-        <setting key="heated bed temperature">110</setting>
+        <setting key="print temperature">270</setting>
+        <setting key="heated bed temperature">107</setting>
         <setting key="standby temperature">175</setting>
 
         <machine>
             <machine_identifier manufacturer="Ultimaker" product="Ultimaker 2+"/>
             <machine_identifier manufacturer="Ultimaker" product="Ultimaker 2 Extended+"/>
             <setting key="hardware compatible">yes</setting>
+
             <hotend id="0.25 mm" />
             <hotend id="0.4 mm" />
             <hotend id="0.6 mm" />
@@ -41,6 +42,9 @@ Generic PC profile. The data in this file may not be correct for your specific m
             <hotend id="BB 0.4" />
             <hotend id="AA 0.4">
                 <setting key="hardware compatible">yes</setting>
+                <setting key="print cooling">0</setting>
+                <setting key="retraction amount">8</setting>
+                <setting key="retraction speed">35</setting>
             </hotend>
             <hotend id="BB 0.8" />
             <hotend id="AA 0.8">
diff --git a/ultimaker_pc_transparent.xml.fdm_material b/ultimaker_pc_transparent.xml.fdm_material
index 690ea02e2..7cffdfebd 100644
--- a/ultimaker_pc_transparent.xml.fdm_material
+++ b/ultimaker_pc_transparent.xml.fdm_material
@@ -21,14 +21,15 @@ Generic PC profile. The data in this file may not be correct for your specific m
     </properties>
     <settings>
         <setting key="hardware compatible">no</setting><!-- This material is not supported on most printers due to high temperatures -->
-        <setting key="print temperature">260</setting>
-        <setting key="heated bed temperature">110</setting>
+        <setting key="print temperature">270</setting>
+        <setting key="heated bed temperature">107</setting>
         <setting key="standby temperature">175</setting>
 
         <machine>
             <machine_identifier manufacturer="Ultimaker" product="Ultimaker 2+"/>
             <machine_identifier manufacturer="Ultimaker" product="Ultimaker 2 Extended+"/>
             <setting key="hardware compatible">yes</setting>
+
             <hotend id="0.25 mm" />
             <hotend id="0.4 mm" />
             <hotend id="0.6 mm" />
@@ -41,6 +42,9 @@ Generic PC profile. The data in this file may not be correct for your specific m
             <hotend id="BB 0.4" />
             <hotend id="AA 0.4">
                 <setting key="hardware compatible">yes</setting>
+                <setting key="print cooling">0</setting>
+                <setting key="retraction amount">8</setting>
+                <setting key="retraction speed">35</setting>
             </hotend>
             <hotend id="BB 0.8" />
             <hotend id="AA 0.8">
diff --git a/ultimaker_pc_white.xml.fdm_material b/ultimaker_pc_white.xml.fdm_material
index 724ef5baf..aaf966589 100755
--- a/ultimaker_pc_white.xml.fdm_material
+++ b/ultimaker_pc_white.xml.fdm_material
@@ -21,14 +21,15 @@ Generic PC profile. The data in this file may not be correct for your specific m
     </properties>
     <settings>
         <setting key="hardware compatible">no</setting><!-- This material is not supported on most printers due to high temperatures -->
-        <setting key="print temperature">260</setting>
-        <setting key="heated bed temperature">110</setting>
+        <setting key="print temperature">270</setting>
+        <setting key="heated bed temperature">107</setting>
         <setting key="standby temperature">175</setting>
 
         <machine>
             <machine_identifier manufacturer="Ultimaker" product="Ultimaker 2+"/>
             <machine_identifier manufacturer="Ultimaker" product="Ultimaker 2 Extended+"/>
             <setting key="hardware compatible">yes</setting>
+
             <hotend id="0.25 mm" />
             <hotend id="0.4 mm" />
             <hotend id="0.6 mm" />
@@ -41,6 +42,9 @@ Generic PC profile. The data in this file may not be correct for your specific m
             <hotend id="BB 0.4" />
             <hotend id="AA 0.4">
                 <setting key="hardware compatible">yes</setting>
+                <setting key="print cooling">0</setting>
+                <setting key="retraction amount">8</setting>
+                <setting key="retraction speed">35</setting>
             </hotend>
             <hotend id="BB 0.8" />
             <hotend id="AA 0.8">
diff --git a/ultimaker_tpu_black.xml.fdm_material b/ultimaker_tpu_black.xml.fdm_material
index 8f365008c..29a5b68fc 100755
--- a/ultimaker_tpu_black.xml.fdm_material
+++ b/ultimaker_tpu_black.xml.fdm_material
@@ -19,8 +19,8 @@ Generic TPU 95A profile. The data in this file may not be correct for your speci
     </properties>
     <settings>
         <setting key="hardware compatible">no</setting><!-- This material is not supported on most printers due to high temperatures -->
-        <setting key="print temperature">260</setting>
-        <setting key="heated bed temperature">110</setting>
+        <setting key="print temperature">228</setting>
+        <setting key="heated bed temperature">0</setting>
         <setting key="standby temperature">175</setting>
 
         <machine>
@@ -35,16 +35,20 @@ Generic TPU 95A profile. The data in this file may not be correct for your speci
                 <setting key="hardware compatible">no</setting>
             </hotend>
         </machine>
+
         <machine>
             <machine_identifier manufacturer="Ultimaker B.V." product="Ultimaker 3"/>
             <machine_identifier manufacturer="Ultimaker B.V." product="Ultimaker 3 Extended"/>
             <hotend id="BB 0.4" />
             <hotend id="AA 0.4">
                 <setting key="hardware compatible">yes</setting>
+                <setting key="print cooling">20</setting>
+                <setting key="retraction speed">35</setting>
             </hotend>
             <hotend id="BB 0.8" />
             <hotend id="AA 0.8">
                 <setting key="hardware compatible">yes</setting>
+                <setting key="retraction speed">45</setting>
             </hotend>
         </machine>
     </settings>
diff --git a/ultimaker_tpu_blue.xml.fdm_material b/ultimaker_tpu_blue.xml.fdm_material
index 310922b96..3dbc44c89 100644
--- a/ultimaker_tpu_blue.xml.fdm_material
+++ b/ultimaker_tpu_blue.xml.fdm_material
@@ -19,8 +19,8 @@ Generic TPU 95A profile. The data in this file may not be correct for your speci
     </properties>
     <settings>
         <setting key="hardware compatible">no</setting><!-- This material is not supported on most printers due to high temperatures -->
-        <setting key="print temperature">260</setting>
-        <setting key="heated bed temperature">110</setting>
+        <setting key="print temperature">228</setting>
+        <setting key="heated bed temperature">0</setting>
         <setting key="standby temperature">175</setting>
 
         <machine>
@@ -35,16 +35,20 @@ Generic TPU 95A profile. The data in this file may not be correct for your speci
                 <setting key="hardware compatible">no</setting>
             </hotend>
         </machine>
+
         <machine>
             <machine_identifier manufacturer="Ultimaker B.V." product="Ultimaker 3"/>
             <machine_identifier manufacturer="Ultimaker B.V." product="Ultimaker 3 Extended"/>
             <hotend id="BB 0.4" />
             <hotend id="AA 0.4">
                 <setting key="hardware compatible">yes</setting>
+                <setting key="print cooling">20</setting>
+                <setting key="retraction speed">35</setting>
             </hotend>
             <hotend id="BB 0.8" />
             <hotend id="AA 0.8">
                 <setting key="hardware compatible">yes</setting>
+                <setting key="retraction speed">45</setting>
             </hotend>
         </machine>
     </settings>
diff --git a/ultimaker_tpu_red.xml.fdm_material b/ultimaker_tpu_red.xml.fdm_material
index 0d3327711..f0c26cca4 100644
--- a/ultimaker_tpu_red.xml.fdm_material
+++ b/ultimaker_tpu_red.xml.fdm_material
@@ -19,8 +19,8 @@ Generic TPU 95A profile. The data in this file may not be correct for your speci
     </properties>
     <settings>
         <setting key="hardware compatible">no</setting><!-- This material is not supported on most printers due to high temperatures -->
-        <setting key="print temperature">260</setting>
-        <setting key="heated bed temperature">110</setting>
+        <setting key="print temperature">228</setting>
+        <setting key="heated bed temperature">0</setting>
         <setting key="standby temperature">175</setting>
 
         <machine>
@@ -35,16 +35,20 @@ Generic TPU 95A profile. The data in this file may not be correct for your speci
                 <setting key="hardware compatible">no</setting>
             </hotend>
         </machine>
+
         <machine>
             <machine_identifier manufacturer="Ultimaker B.V." product="Ultimaker 3"/>
             <machine_identifier manufacturer="Ultimaker B.V." product="Ultimaker 3 Extended"/>
             <hotend id="BB 0.4" />
             <hotend id="AA 0.4">
                 <setting key="hardware compatible">yes</setting>
+                <setting key="print cooling">20</setting>
+                <setting key="retraction speed">35</setting>
             </hotend>
             <hotend id="BB 0.8" />
             <hotend id="AA 0.8">
                 <setting key="hardware compatible">yes</setting>
+                <setting key="retraction speed">45</setting>
             </hotend>
         </machine>
     </settings>
diff --git a/ultimaker_tpu_white.xml.fdm_material b/ultimaker_tpu_white.xml.fdm_material
index 46526bbcc..a126e87d9 100644
--- a/ultimaker_tpu_white.xml.fdm_material
+++ b/ultimaker_tpu_white.xml.fdm_material
@@ -19,8 +19,8 @@ Generic TPU 95A profile. The data in this file may not be correct for your speci
     </properties>
     <settings>
         <setting key="hardware compatible">no</setting><!-- This material is not supported on most printers due to high temperatures -->
-        <setting key="print temperature">260</setting>
-        <setting key="heated bed temperature">110</setting>
+        <setting key="print temperature">228</setting>
+        <setting key="heated bed temperature">0</setting>
         <setting key="standby temperature">175</setting>
 
         <machine>
@@ -35,16 +35,20 @@ Generic TPU 95A profile. The data in this file may not be correct for your speci
                 <setting key="hardware compatible">no</setting>
             </hotend>
         </machine>
+
         <machine>
             <machine_identifier manufacturer="Ultimaker B.V." product="Ultimaker 3"/>
             <machine_identifier manufacturer="Ultimaker B.V." product="Ultimaker 3 Extended"/>
             <hotend id="BB 0.4" />
             <hotend id="AA 0.4">
                 <setting key="hardware compatible">yes</setting>
+                <setting key="print cooling">20</setting>
+                <setting key="retraction speed">35</setting>
             </hotend>
             <hotend id="BB 0.8" />
             <hotend id="AA 0.8">
                 <setting key="hardware compatible">yes</setting>
+                <setting key="retraction speed">45</setting>
             </hotend>
         </machine>
     </settings>