UHK80 Phantom Modules when keyboard halves connected in agent.

[Salivala]

With the keyboard halves connected I get these phantom registrations of the modules on the uhk80.
Possibly relevant:

Pogo pins seem to be barely connected when halves are together, could be a reason.

[ert78gb]

Which Agent version do you experience it? I think the https://github.com/UltimateHackingKeyboard/agent/releases/tag/v5.0.2 contains the fix

[pcooke9]

I experience this as well. Until I saw this post, I didn't realize that it also happens on the keymap page, but I originally saw a "Touchpad is detected" message flashing on the Firmware tab.

I mentioned it here:
#1057 (comment)

Something else I noticed; when the UHK80 has its halves joined, the info at the top of Agent's "Firmware" tab intermittently shows the message: "Touchpad is detected, and its firmware is implemented by the right keyboard half."

It shows in seemingly random intervals (between 4-30 seconds). Usually only appearing briefly, but sometimes the message remains for several seconds.

Obviously the touchpad is not connected when the UHK's halves are joined...

EDIT: To be clear, this randomly appearing touchpad message only happens with the UHK80, and only when in joined mode. When the module is connected, the "touchpad detected" message remains steadily visible, as it should.

And this was @kareltucek's response:
#1057 (comment)

[pcooke9]

Which Agent version do you experience it? I think the https://github.com/UltimateHackingKeyboard/agent/releases/tag/v5.0.2 contains the fix

I'm still having the issue with FW v12.2.0 and Agent v5.0.2.

[ert78gb]

I'm still having the issue with FW v12.2.0 and Agent v5.0.2.

thanks for the heads up.

[mondalaci]

Moving this to the firmware repo since, as it turns out, the root cause is the firmware.