BACnet Driver

Table of Contents Requirements Configuring BACnet driver driver_config Registry Configuration Volttron Point Name Units BACnet Object Type Property Writable Index Notes Example

Requirements

Communicating with BACnet devices requires that the BACnet Proxy Agent is configured and running. All device communication happens through this agent. On some BACnet networks starting the Master Driver Agent before the BACnet Proxy may cause device communication to fail.

Configuring BACnet driver

The configuration is broken into two parts. The general driver configuration and the registry config. The general driver config can be found here.

driver_config

There are two valid arguments for the "driver_config" section of the general driver configuration.

• device_address - Address of the device. If the target device is behind an IP to MS/TP router then Remote Station addressing will probably be needed for the driver to find the device.
• proxy_address - (Optional) VIP address of the BACnet proxy. Defaults to "platform.bacnet_proxy". See BACnet Proxy Agent for details.

Registry Configuration

The device type specific configuration of the BACnet driver takes place in a CSV file specified in the driver configuration file. An example file can be found in the voltron repository at volttron/drivers/bacnet_example_config.csv

Most of the configuration file can be generated with the grab_bacnet_config.py utility. See AutoBacnetConfigGeneration.

If the device address is unknown then the bacnet_scan utility can be used to discover devices on a network.

Currently the driver provides no method to access array type properties even if the members of the array are of a supported type.

The CSV file should be comma delimited. An Excel spreadsheet converted to CSV should work fine, even with commas in the data.

The CSV file requires a header line with the following columns labeled in any order (without quotes):

Volttron Point Name

The name to used access the point. References to this point will use this name.

Units

Used for meta data when creating point information on the sMAP historian.

BACnet Object Type

A string representing what kind of BACnet standard object the point belongs to. Examples include:

• analogInput
• analogOutput
• analogValue
• binaryInput
• binaryOutput
• binaryValue
• multiStateValue

Property

A string representing the name of the property belonging to the object. Usually this will be "presentValue".

Writable

Either TRUE or FALSE. Determines if the point can be written to. If TRUE an actuation point will be created in addition to the normal point representing periodically scraped data. Only points labeled TRUE can be accessed through the ActuatorAgent. Incorrectly labeled points will cause an error to be returned if the user attempts to write to the point.

Currently there the BACnet Driver will write at priority 16 (the lowest possible) when write requests are made.

Index

Object ID of the BACnet object.

Notes

Additional notes for the point.

Example

Additional columns may be added at the user discretion as long as they are labeled differently.

The following is a simple example:

Point Name	Volttron Point Name	Units	Unit Details	BACnet Object Type	Property	Writable	Index	Notes
Building1/FCB.Local Application.DA1-P	SampleAnalogInput	inchesOfWater	-0.20 to 5.00	analogInput	presentValue	FALSE	3000108	Resolution: 0.001
Building1/FCB.Local Application.CLG-O	SampleAnalogOutput	percent	0.00 to 100.00 (default 0.0)	analogOutput	presentValue	TRUE	3000107	Resolution: 0.1
Building1/Energy.OAT	SampleAnalogValue	days	No limits. (default 70.0)	analogValue	presentValue	FALSE	3000019
Building1/FCB.Local Application.LT-A	SampleBinaryInput	Enum	0-1	binaryInput	presentValue	FALSE	3000115	BinaryPV: 0=inactive, 1=active
Building1/FCB.Local Application.GEF-C	SampleBinaryOutput	Enum	0-1 (default 0)	binaryOutput	presentValue	TRUE	3000114	BinaryPV: 0=inactive, 1=active
Building1/FCB.Local Application.TUNING-RESET	SampleBinaryValue	Enum	0-1 (default 0)	binaryValue	presentValue	TRUE	3000129	BinaryPV: 0=inactive, 1=active
Building1/FCB.Local Application.APP-MODE	SampleMultiStateValue	State	State count: 7 (default 7)	multiStateValue	presentValue	FALSE	3000128	1=Cool Only, 2=Heat Only, 3=Fan Only, 4=Water Flush, 5=Purge, 6=Vent, 7=Auto