2020 aplic cam mount

printer_mods/techprolet/README.md

@@ -0,0 +1,39 @@
+## 2020 Aplic Cam Mount
+
+![2020 Aplic Cam Mount installation example](img/2020_aplic_cam_mount.jpg)
+
+2020 Aplic Cam Mount is a 3D printed part that is used to mount a cheapo aplic hd camera to the 2020 frame at bed level. The mount is designed to be held in place with a M3 screw and a M3 nut. Additionaly, you need 4 M3 heat inserts, 4 M3 spacers and 4 M3x6 screws for mounting the camera on the mount (pun intended).
+
+
+### Files
+* `aplic_cam_mount_voron_2_4_300x300.stl` - The mount STL, angled for the Voron 2.4 300x300mm geometry.
+* `aplic_cam_mount.scad` - The OpenSCAD file for the mount (you can play modify the parameters for your own printer's geometry).
+
+### Parts
+The mount is designed to be used with the following parts: 
+```
+- 1x 3d printed 2020 Aplic Cam Mount
+- 1x Aplic Webcam - 1920x1080P 
+- 1x M3x10 screw
+- 2x M3 nut
+- 4x M3 heat insert
+- 4x M3 spacer
+- 4x M3x6 screws
+```
+### Printing
+The mount is printed in the orientation that it is in the STL file. The mount is printed should be printed with the recommended Voron settings (40% infill and 4 perimeters) in ABS/ASA. That said, I've printed mine PETG and it still holds. No supports or mount needed
+
+
+
+### Credits and license
+The mount was designed around the **2020 Cable Clamp** by ed_419522  https://www.printables.com/model/307909-2020-cable-clamp
+
+Copyright 2024, Pavlos Iliopoulos.
+
+    2020 Aplic Cam Mount is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.
+
+    2020 Aplic Cam Mount is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License along with this program. If not, see <https://www.gnu.org/licenses/>. 
+
+The author does not hold any copyright or has any affiliation with aplic and/or its products.

printer_mods/techprolet/aplic_cam_mount.scad

@@ -0,0 +1,156 @@
+/*
+Copyright 2024, Pavlos Iliopoulos.
+
+    2020 Aplic Cam Mount is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.
+
+    2020 Aplic Cam Mount is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License along with this program. If not, see <https://www.gnu.org/licenses/>. 
+
+The author does not hold any copyright or has any affiliation with aplic and/or its products.
+    */
+
+
+
+$fn = 64;
+
+// Wall thickness
+wall_thickness = 3;
+
+// Dimensions of the anchor
+anchor_l = 15;
+anchor_w = 12;
+anchor_h = 6;
+
+// Hole distances
+hole_distance_x = 54;
+hole_distance_y = 17;
+corrective_hole_x_offset = 0.8;
+
+// Dimensions of the wall
+wall_l = hole_distance_x + 3 * wall_thickness;
+wall_w = hole_distance_y + 3 * wall_thickness;
+
+// Camera elevation
+cam_elevation = 25;
+
+// Screw dimensions
+screw_length = 10;
+screw_receiver_d = 6;
+
+// Hex hole dimensions
+hex_hole_y = -7;
+hex_hole_d = 6;
+
+// Support dimensions
+support_w = anchor_l - 2 * wall_thickness;
+support_x_offset = (anchor_w - wall_thickness) / 2;
+
+// Heat insert dimensions
+heat_insert_d = 4.4;
+heat_insert_thickness = 13;
+
+// Calculate the camera viewing angle
+cam_viewing_angle_x = atan(74 / 148); // arctan( (distance between 2 rods/2) / (distance from back + stage side/2) )
+echo("CAM VIEWING ANGLE x:", cam_viewing_angle_x);
+
+// Define the solid anchor module
+module solid_anchor() {
+    anchor_l = 15;
+    anchor_w = 12;
+    anchor_h = 6;
+
+    tie_w = 4;
+    tie_offset_y = 9;
+    border_w = 0.5;
+
+    // Length is 15mm, width is 12mm
+    union() {
+        import("./M3_CABLE_ANCHOR.STL");
+        translate([border_w, tie_offset_y, 0]) {
+            cube([anchor_w - 2 * border_w, tie_w, anchor_h]);
+        }
+    }
+}
+
+// Define the back panel module
+module back_panel() {
+    hull() {
+        translate([0, wall_thickness / 2, anchor_h / 2]) {
+            cube([anchor_w, wall_thickness, anchor_h], center = true);
+        }
+        translate([0, wall_thickness / 2, wall_w / 2 + anchor_h + cam_elevation]) {
+            cube([wall_l, wall_thickness, wall_w], center = true);
+        }
+    }
+}
+
+// Define the inserts module
+module inserts() {
+    translate([0, 0, wall_w / 2 + anchor_h + cam_elevation]) {
+        translate([wall_thickness, -(wall_l * sin(cam_viewing_angle_x) / 2), 0]) {
+            rotate([0, 0, cam_viewing_angle_x]) {
+                for (x = [-1, 1]) {
+                    for (y = [-1, 1]) {
+                        translate([corrective_hole_x_offset + x * hole_distance_x / 2, heat_insert_thickness / 2, y * hole_distance_y / 2]) {
+                            rotate([90, 0, 0]) {
+                                cylinder(h = heat_insert_thickness, d = heat_insert_d);
+                            }
+                        }
+                    }
+                }
+            }
+        }
+    }
+}
+
+module rotated_wall() {
+    translate([wall_thickness, -(wall_l * sin(cam_viewing_angle_x) / 2), 0]) {
+        rotate([0, 0, cam_viewing_angle_x]) {
+            cube([wall_l, wall_thickness, wall_w], center = true);
+        }
+    }
+}
+
+module cam_mount() {
+    difference() {
+        translate([0, wall_thickness / 2, wall_w / 2 + anchor_h + cam_elevation]) {
+            hull() {
+                #cube([wall_l, wall_thickness, wall_w], center=true);
+                #rotated_wall();
+            }
+        }
+
+        #translate([0, hex_hole_y, 0]) {
+        cylinder(h = anchor_h + cam_elevation + wall_w, d = hex_hole_d);
+        }
+    }
+}
+
+module supports() {
+    for (i = [-1, 1]) {
+        translate([i * support_x_offset, -support_w / 2, (cam_elevation + anchor_h) / 2]) {
+            cube([wall_thickness, support_w, cam_elevation + anchor_h], center = true);
+        }
+    }
+}
+
+module aplic_complete_mount() {
+    translate([-anchor_w / 2, wall_thickness - anchor_l, 0]) {
+        solid_anchor();
+    }
+    difference() {
+        union() {
+            back_panel();
+            cam_mount();
+        }
+
+        #inserts ();
+    }
+
+    supports();
+}
+
+rotate([270, 0, 0]){
+    aplic_complete_mount();
+}