InitProcess.txt

#关回显
>   ATE0
<   ATE0
    OK
#我也不知道
>   AT+CGREG=1
<   OK

#开网络
>   AT$MYNETACT=0,1
<   OK
    $MYURCACT: 0,1,"10.98.28.136"
    /* IP地址不固定 */

#连接网络
>   AT$MYNETCREATE=0,0,0,"124.128.34.76",6666
#成功
<   CONNECT
#断开
>   NO CARRIER

/* 然后就可以进行数据透传了，发送数据会直接通过TCP发送到服务器 */


非透传模式：

set param for Data transfer

AT$MYNETSRV=0,0,0,0,"124.128.34.76:6666"

41 54 24 4D 59 4E 45 54 53 52 56 3D 30 2C 30 2C 30 2C 30 2C 22 31 32 34 2E 31 32 38 2E 33 34 2E 37 36 3A 36 36 36 36 22 0D 0A 

open the service

AT$MYNETOPEN=0

41 54 24 4D 59 4E 45 54 4F 50 45 4E 3D 30 0D 0A


write data to socket
>   AT$MYNETWRITE=0,10

41 54 24 4D 59 4E 45 54 57 52 49 54 45 3D 30 2C 31 30 0D 0A 

<   $MYNETWRITE: 0,10
>   00 08 01 02 03 04 05 06 07 08 0D 0A
<   OK

read data from socket
>   AT$MYNETREAD=0,2048

41 54 24 4D 59 4E 45 54 52 45 41 44 3D 30 2C 32 30 34 38 0D 0A 

<   "$MYNETREAD: 0,0"
<   "OK"

OR

>   AT$MYNETREAD=0,2048
<   $MYNETREAD: 0,10
<   1234567890
<   OK

close socket

>   AT$MYNETCLOSE=0
<   0K