Skip to content

Latest commit

 

History

History
61 lines (36 loc) · 1.97 KB

Readme.md

File metadata and controls

61 lines (36 loc) · 1.97 KB

Intel Stratix 10 Platform

Summary

This is a port of 64-bit Tiano Core UEFI for the Intel Stratix 10 platform based on Stratix 10 SX development board.

This UEFI port works with ATF + UEFI implementation for Intel Stratix 10 board, and will boot to Linux port of Stratix 10.

Status

This firmware has been validated to boot to Linux for Stratix 10 that can be obtained from https://github.com/altera-opensource/linux-socfpga.

The default boot is the UEFI shell. The UEFI shell will run startup.nsh by default, and you may change the startup.nsh to run commands on boot.

Building the firmware

  • Fetch the ATF, edk2, and edk2-platforms repositories into local host. Make all the repositories in the same ${BUILD_PATH}.

  • Install the AARCH64 GNU 4.8 toolchain.

  • Build UEFI using Stratix 10 platform as configuration

    . edksetup.sh

build -a AARCH64 -p Platform/Intel/Stratix10/Stratix10SoCPkg.dsc -t GCC5 -b RELEASE -y report.log -j build.log -Y PCD -Y LIBRARY -Y FLASH -Y DEPEX -Y BUILD_FLAGS -Y FIXED_ADDRESS

Note: Refer to build instructions from the top level edk2-platforms Readme.md for further details

  • Build ATF for Stratix 10 platform (commit id:2cbeee4d519bac0d79da98faae969fae9f9558f9 is tested and known working)

     make CROSS_COMPILE=aarch64-linux-gnu- device=s10

  • Build atf providing the previously generated UEFI as the BL33 image

    make CROSS_COMPILE=aarch64-linux-gnu- bl2 fip PLAT=stratix10
BL33=PEI.ROM

Install Procedure

  • dd fip.bin to a A2 partition on the MMC drive to be booted in Stratix 10 board.

  • Generate a SOF containing bl2

.. code:: bash aarch64-linux-gnu-objcopy -I binary -O ihex --change-addresses 0xffe00000 bl2.bin bl2.hex quartus_cpf --bootloader bl2.hex <quartus_generated_sof> <output_sof_with_bl2>

  • Configure SOF to board

.. code:: bash nios2-configure-sof <output_sof_with_bl2>