diff --git a/main_tests/synch/pieeprom-2021-07-06.bin b/main_tests/synch/pieeprom-2021-07-06.bin
deleted file mode 100644
index b547f05..0000000
Binary files a/main_tests/synch/pieeprom-2021-07-06.bin and /dev/null differ
diff --git a/synchrona/synch/pieeprom-new.bin b/main_tests/synch/pieeprom-new.bin
similarity index 100%
rename from synchrona/synch/pieeprom-new.bin
rename to main_tests/synch/pieeprom-new.bin
diff --git a/synchrona/lib/production.sh b/synchrona/lib/production.sh
deleted file mode 100644
index b7fedda..0000000
--- a/synchrona/lib/production.sh
+++ /dev/null
@@ -1,253 +0,0 @@
-#!/bin/bash
-
-source $SCRIPT_DIR/config.sh
-source $SCRIPT_DIR/print/print_basic.sh
-
-#----------------------------------#
-# Functions section                #
-#----------------------------------#
-
-show_ready_state() {
-	PROGRESS=0
-	READY=1
-}
-
-show_start_state() {
-	PASSED=0
-	READY=0
-	FAILED=0
-	PROGRESS=1
-	FAILED_NO=0
-}
-
-get_board_serial() {
-	IS_OKBOARD=1
-	while [ $IS_OKBOARD -ne 0 ]; do
-		echo "Please use the scanner to scan the QR/Barcode on your carrier"
-		read BOARD_SERIAL
-		echo $BOARD_SERIAL | grep "S[0-9][0-9]" | grep "SN" &>/dev/null
-		IS_OKBOARD=$?
-	done
-	
-	BOARD_SERIAL=$(echo $BOARD_SERIAL | xargs)
-	#BOARD_SERIAL=$(ssh_cmd "dmesg | grep SPI-NOR-UniqueID | cut -d' ' -f9 | tr -d '[:cntrl:]'") # to be updated with a serial number from carrier
-}
-
-get_fmcomms_serial() {
-	BOARD_SERIAL=$(ssh_cmd "fru-dump -i /sys/devices/platform/amba/ff030000.i2c/i2c-1/i2c-8/8-0052/eeprom -b | grep 'Serial Number' | cut -d' ' -f3 | tr -d '[:cntrl:]'")
-}
-
-dut_date_sync() {
-	CURR_DATE="@$(date +%s)"
-	ssh_cmd "sudo date -s '$CURR_DATE'"
-}
-
-handle_error_state() {
-	local serial="$1"
-	FAILED=1
-	inc_fail_stats "$serial"
-	console_ascii_failed
-	if [ $SYNCHRONIZATION -eq 0 ]; then 
-		cat "$LOGFILE" > "$LOGDIR/failed_${serial}_${RUN_TIMESTAMP}.log"
-		telemetry prod-synchrona-upload --tdir $LOGDIR
-	else
-		cat "$LOGFILE" > "$LOGDIR/no_date_failed_${serial}_${RUN_TIMESTAMP}.log"
-		telemetry prod-synchrona-upload --tdir $LOGDIR
-	fi
-	cat /dev/null > "$LOGFILE"
-}
-
-need_to_read_eeprom() {
-	[ "$FAILED" == "1" ] || ! have_eeprom_vars_loaded
-}
-
-inc_fail_stats() {
-	local serial="$1"
-	let FAILED_CNT='FAILED_CNT + 1'
-	echo "PASSED_CNT=$PASSED_CNT" > $STATSFILE
-	echo "FAILED_CNT=$FAILED_CNT" >> $STATSFILE
-	[ -z "$serial" ] || echo "FAILED $serial" >> $RESULTSFILE
-}
-
-inc_pass_stats() {
-	local serial="$1"
-	let PASSED_CNT='PASSED_CNT + 1'
-	echo "PASSED_CNT=$PASSED_CNT" > $STATSFILE
-	echo "FAILED_CNT=$FAILED_CNT" >> $STATSFILE
-	echo "PASSED $serial" >> $RESULTSFILE
-	console_ascii_passed
-}
-
-console_ascii_passed() {
-	echo_green "$(cat $SCRIPT_DIR/lib/passed.ascii)"
-}
-
-console_ascii_failed() {
-	echo_red "$(cat $SCRIPT_DIR/lib/failed.ascii)"
-	if [ $FAILED_TESTS -ne 255 ] && [ $FAILED_UART -ne 255 ] && [ $FAILED_SPI -ne 255 ] && [ $FAILED_MISC -ne 255 ]; then
-		FAILED_NO=$(( FAILED_TESTS + FAILED_UART + FAILED_SPI + FAILED_MISC ))
-		echo_red "$FAILED_NO TESTS FAILED"
-	fi
-}
-
-wait_for_eeprom_vars() {
-	DONT_SHOW_EEPROM_MESSAGES=1
-	if need_to_read_eeprom ; then
-		echo_green "Loading settings from EEPROM"
-		eeprom_cfg load || {
-			echo_red "Failed to load settings from EEPROM."
-			echo_red "Plug in a board with EEPROM vars configured to continue..."
-			echo
-		}
-		while ! eeprom_cfg load &> /dev/null ; do
-			sleep 1
-			continue
-		done
-		show_eeprom_vars
-	fi
-}
-
-wait_for_firmware_files() {
-	local target="$1"
-	local ver_file="$SCRIPT_DIR/release/$target/version"
-	FW_VERSION="$(cat $ver_file)"
-	if ! have_all_firmware_files "$target" || [ -z "$FW_VERSION" ] ; then
-		echo_red "Firmware files not found, please add them to continue..."
-		while ! have_all_firmware_files "$target" || [ ! -f "$ver_file" ]
-		do
-			sleep 1
-		done
-	fi
-	FW_VERSION="$(cat $ver_file)"
-}
-
-check_conn(){
-	while true; do
-		if ping -q -c3 -w50 analog.local &>/dev/null
-		then
-			echo_blue "Connection to DUT OK"
-			break
-		else
-			echo_red "Check ethernet connection to DUT"
-		fi
-	done
-}
-
-start_gps_spoofing(){
-	local GPSDIR=$SCRIPT_DIR/src/gps-sdr-sim/player
-	if ping -q -c2 pluto.local &>/dev/null
-	then
-		[ -d $GPSDIR ] || return 1
-		pushd $GPSDIR
-		./plutoplayer -t ../gpssim.bin -a -60 &>/dev/null &
-		popd
-	else
-		echo_red "Pluto GPS spoofer not connected to PI."
-		return 1
-	fi
-}
-
-stop_gps_spoofing(){
-	pkill plutoplayer &>/dev/null
-}
-
-#----------------------------------#
-# Main section                     #
-#----------------------------------#
-
-production() {
-        local TARGET="$1"
-        local MODE="$2"
-	local IIO_REMOTE=analog.local 
-
-        [ -n "$TARGET" ] || {
-                echo_red "No target specified"
-                return 1
-        }
-        local target_upper=$(toupper "$TARGET")
-
-        # State variables; are set during state transitions
-        local PASSED=0
-        local FAILED=0
-        local READY=0
-        local PROGRESS=0
-
-        # This will store in a `log` directory the following files:
-        # * _results.log - each device that has passed or failed with S/N
-        #    they will only show up here if they got a S/N, so this assumes
-        #    that flashing worked
-        # * _errors.log - all errors that don't yet have a S/N
-        # * _stats.log - number of PASSED & FAILED
-
-        local LOGDIR=$SCRIPT_DIR/log
-	# temp log to store stuff, before we know the S/N of device
-        local LOGFILE=$LOGDIR/temp.log
-	# errors that cannot be mapped to any device (because no S/N)
-        local ERRORSFILE=$LOGDIR/_errors.log
-	# stats ; how many passes/fails
-        local STATSFILE=$LOGDIR/_stats.log
-	 # format is "<BOARD S/N> = OK/FAILED"
-        local RESULTSFILE=$LOGDIR/_results.log
-
-        # Remove temp log file start (if it exists)
-        rm -f "$LOGFILE"
-
-        mkdir -p $LOGDIR
-        exec &> >(tee -a "$LOGFILE")
-
-	sync
-
-	# TBD ready state - connection, other settings
-
-	RUN_TIMESTAMP="$(date +"%Y-%m-%d_%H-%M-%S")"
-
-	timedatectl | grep "synchronized: yes"
-	SYNCHRONIZATION=$?
-	if [ $SYNCHRONIZATION -ne 0 ]; then
-		echo_red "Your time and date is not up-to-date. The times of the logs will be inaccurate. The corresponding log files will begin with \"no_date\""
-	fi
-
-	case $MODE in
-			"Synchrona Production Test")
-				ssh_cmd "sudo /home/analog/synch/synch_test.sh $BOARD_SERIAL"
-				FAILED_TESTS=$?
-				if [ $FAILED_TESTS -ne 255 ]; then
-					$SCRIPT_DIR/synch/uart_test.sh 
-					FAILED_UART=$?
-					if [ $FAILED_UART -ne 255 ]; then
-						$SCRIPT_DIR/synch/spi_test.sh
-						FAILED_SPI=$?
-						if [ $FAILED_SPI -ne 255 ]; then
-							$SCRIPT_DIR/synch/misc_test.sh
-							FAILED_MISC=$?
-						fi
-					fi
-				fi
-				if [ $FAILED_TESTS -ne 0 ] || [ $FAILED_UART -ne 0 ] || [ $FAILED_SPI -ne 0 ] || [ $FAILED_MISC -ne 0 ]; then
-						handle_error_state "$BOARD_SERIAL"
-				fi
-
-				BIN_PATH="/lib/firmware/raspberrypi/bootloader/stable/pieeprom-2021-07-06.bin" #latest rpi stable image
-				;;
-			*) echo "invalid option $MODE" ;;
-	esac
-
-	if [ -f "$STATSFILE" ] ; then
-			source $STATSFILE
-	fi
-
-	if [ "$FAILED" == "0" ] ; then
-			inc_pass_stats "$BOARD_SERIAL"
-			populate_label_fields $BOARD_SERIAL
-			print_label
-			if [ $SYNCHRONIZATION -eq 0 ]; then
-				cat "$LOGFILE" > "$LOGDIR/passed_${BOARD_SERIAL}_${RUN_TIMESTAMP}.log"
-				telemetry prod-synchrona-upload --tdir $LOGDIR
-			else
-				cat "$LOGFILE" > "$LOGDIR/no_date_passed_${BOARD_SERIAL}_${RUN_TIMESTAMP}.log"
-				telemetry prod-synchrona-upload --tdir $LOGDIR
-			fi
-			cat /dev/null > "$LOGFILE"
-	fi
-}
-