diff --git a/examples/ad4080_examples/ad4080_m2k_filter_sweep.py b/examples/ad4080_examples/ad4080_m2k_filter_sweep.py
new file mode 100644
index 000000000..978bc83af
--- /dev/null
+++ b/examples/ad4080_examples/ad4080_m2k_filter_sweep.py
@@ -0,0 +1,149 @@
+# Copyright (C) 2022-2024 Analog Devices, Inc.
+#
+# SPDX short identifier: ADIBSD
+
+import sys
+import libm2k
+from sine_gen import *
+from time import sleep
+
+from scipy import signal
+
+import matplotlib.pyplot as plt
+import numpy as np
+from adi import ad4080
+
+# Optionally pass URI as command line argument,
+# else use default ip:analog.local
+my_uri = sys.argv[1] if len(sys.argv) >= 2 else "ip:analog.local"
+
+my_uri = "serial:COM5,230400,8n1n"
+
+print("uri: " + str(my_uri))
+
+my_adc = ad4080(uri=my_uri, device_name="ad4080")
+
+# print("Sampling frequency: ", my_adc.sampling_frequency)
+
+
+
+print("sinc_dec_rate_available: ", my_adc.sinc_dec_rate_available)
+print("filter_sel_available: ", my_adc.filter_sel_available)
+
+print("Setting filter to SINC5, decimation 128")
+my_adc.sinc_dec_rate = 128
+# my_adc.filter_sel = "sinc5_plus_compensation"
+my_adc.filter_sel = "sinc5"
+print("Verifying...")
+print("sinc_dec_rate: ", my_adc.sinc_dec_rate)
+print("filter_sel: ", my_adc.filter_sel)
+
+
+
+print("Scale: ", my_adc.scale)
+
+print(dir(my_adc))
+
+plt.figure(1)
+plt.clf()
+# Collect data
+data = my_adc.rx()
+
+
+
+plt.plot(range(0, len(data)), data, label="channel0")
+plt.xlabel("Data Point")
+plt.ylabel("ADC counts")
+plt.legend(
+    bbox_to_anchor=(0.0, 1.02, 1.0, 0.102),
+    loc="lower left",
+    ncol=4,
+    mode="expand",
+    borderaxespad=0.0,
+)
+
+plt.show()
+
+
+# Set up m2k
+
+ctx=libm2k.m2kOpen()
+ctx.calibrateADC()
+ctx.calibrateDAC()
+
+siggen=ctx.getAnalogOut()
+
+
+fs = []
+amps = []
+vref = 5.0
+
+for f in range(10000, 1000000, 10000): # Sweep 3kHz to 300kHz in 1kHz steps
+
+    #call buffer generator, returns sample rate and buffer
+    samp0,buffer0 = sine_buffer_generator(0,f,0.5,1.5,180)
+    samp1,buffer1 = sine_buffer_generator(1,f,0.5,1.5,0)
+    
+    siggen.enableChannel(0, True)
+    siggen.enableChannel(1, True)
+    
+    siggen.setSampleRate(0, samp0)
+    siggen.setSampleRate(1, samp1)
+    
+    siggen.push([buffer0,buffer1])
+    
+    sleep(0.25)
+    
+    #print("Sample Rate: ", my_adc.sampling_frequency)
+    print("Frequency: ", f)
+    
+    data = my_adc.rx()
+    data = my_adc.rx()
+        
+    x = np.arange(0, len(data))
+    voltage = data * 2.0 * vref / (2 ** 20)
+    dc = np.average(voltage)  # Extract DC component
+    ac = voltage - dc  # Extract AC component
+    rms = np.std(ac)
+    
+    fs.append(f)
+    amps.append(rms)
+    
+
+
+amps_db = 20*np.log10(amps/np.sqrt(4.0)) # 4V is p-p amplitude
+
+plt.figure(2)
+plt.clf()
+plt.title("AD4020 Time Domain Data")
+plt.plot(x, voltage)
+plt.xlabel("Data Point")
+plt.ylabel("Voltage (V)")
+plt.show()
+
+f, Pxx_spec = signal.periodogram(
+    ac, my_adc.sampling_frequency, window="flattop", scaling="spectrum"
+)
+Pxx_abs = np.sqrt(Pxx_spec)
+
+plt.figure(3)
+plt.clf()
+plt.title("AD4020 Spectrum (Volts absolute)")
+plt.semilogy(f, Pxx_abs)
+plt.ylim([1e-6, 4])
+plt.xlabel("frequency [Hz]")
+plt.ylabel("Voltage (V)")
+plt.draw()
+plt.pause(0.05)
+
+plt.figure(4)
+plt.title("input filter freq. response")
+plt.semilogx(fs, amps_db, linestyle="dashed", marker="o", ms=2)
+#plt.ylim([1e-6, 4])
+plt.xlabel("frequency [Hz]")
+plt.ylabel("response (dB)")
+plt.draw()
+
+siggen.stop()
+libm2k.contextClose(ctx)
+del my_adc