module_adapter_ipc4: Save and pre-parse base_cfg_ext data

The kernel-provided "base_cfg_ext" data wasn't being handled correctly
by the module adapter layer.  These structs (packed wire formats) only
ever lived in the IPC memory.  The module would set them on an
"init_data" before calling into driver init, and then clear that
poitner afterwards.  That's a critical problem, because the values in
that struct need to be used at pipeline setup time to configure buffer
formats!

Save the data correctly.  Also pre-parse it so users don't need to do
byte math on raw buffers and can just use "in/output_pins[]" arrays on
the module_config struct.

Signed-off-by: Andy Ross <[email protected]>

src/audio/module_adapter/module_adapter.c

@@ -1329,6 +1329,10 @@ int module_adapter_reset(struct comp_dev *dev)
 	rfree(mod->stream_params);
 	mod->stream_params = NULL;
 
+#if CONFIG_IPC_MAJOR_4
+	rfree(mod->priv.cfg.input_pins);
+#endif
+
 	comp_dbg(dev, "module_adapter_reset(): done");
 
 	return comp_set_state(dev, COMP_TRIGGER_RESET);

src/audio/module_adapter/module_adapter_ipc4.c

@@ -38,19 +38,39 @@ int module_adapter_init_data(struct comp_dev *dev,
 			     const struct comp_ipc_config *config,
 			     const void *spec)
 {
-	if (dev->drv->type == SOF_COMP_MODULE_ADAPTER) {
-		const struct ipc_config_process *ipc_module_adapter = spec;
+	const struct ipc_config_process *cp = spec;
+	const struct ipc4_base_module_extended_cfg *cfg = (void *)cp->data;
+	size_t cfgsz = cp->size;
 
-		dst->init_data = ipc_module_adapter->data;
-		dst->size = ipc_module_adapter->size;
-		dst->avail = true;
+	assert(dev->drv->type == SOF_COMP_MODULE_ADAPTER);
+	if (cp->size < sizeof(cfg->base_cfg))
+		return -EINVAL;
 
-		memcpy_s(&dst->base_cfg,  sizeof(dst->base_cfg), ipc_module_adapter->data,
-			 sizeof(dst->base_cfg));
-	} else {
-		dst->init_data = spec;
+	dst->base_cfg = cfg->base_cfg;
+	dst->size = cp->size;
+
+	if (cp->size >= sizeof(*cfg)) {
+		int ni = cfg->base_cfg_ext.nb_input_pins;
+		int no = cfg->base_cfg_ext.nb_output_pins;
+		size_t pinsz = (ni * sizeof(*dst->input_pins))
+			+ (no * sizeof(*dst->output_pins));
+
+		if (cp->size == (sizeof(*cfg) + pinsz)) {
+			dst->nb_input_pins = ni;
+			dst->nb_output_pins = no;
+			dst->input_pins = rmalloc(SOF_MEM_ZONE_RUNTIME_SHARED,
+						  0, SOF_MEM_CAPS_RAM, pinsz);
+			if (!dst->input_pins)
+				return -ENOMEM;
+
+			dst->output_pins = (void *) &dst->input_pins[ni];
+			memcpy_s(dst->input_pins, pinsz,
+				 &cfg->base_cfg_ext.pin_formats[0], pinsz);
+		}
 	}
 
+	dst->init_data = cp->data; /* legacy API */
+	dst->avail = true;
 	return 0;
 }
 

src/include/module/module/base.h

@@ -30,7 +30,12 @@ struct module_config {
 	const void *init_data; /**< Initial IPC configuration. */
 #if CONFIG_IPC_MAJOR_4
 	struct ipc4_base_module_cfg base_cfg;
-	struct ipc4_base_module_cfg_ext *basecfg_ext;
+	uint8_t nb_input_pins;
+	uint8_t nb_output_pins;
+	struct ipc4_input_pin_format *input_pins;
+	struct ipc4_output_pin_format *output_pins;
+	struct ipc4_base_module_cfg_ext *basecfg_ext; /* legacy API */
+
 #endif
 };