Skip to content

Submission for fabrication of silicon photonics for a SiEPIC openEBL run

License

Notifications You must be signed in to change notification settings

antonin-optech/openEBL-2024-07-Si-Heaters

 
 

Repository files navigation

openEBL Design Submissions

  • The Canadian Silicon Photonics Foundry, SiEPICfab, presents the open electron beam lithography (EBL) fabrication process, where former and current students of SiEPIC workshops and courses can submit their design for manufacturing and testing.
  • More details about openEBL.
  • The previous submission was in February 2024.
  • Submission deadline: July 14, 2024
  • The previous submission was in February 2024. You can look at this previous designs for inspiration.

Fabrication process: Passive Silicon + Heaters

Technical summary:

  • SOI wafer, 220 nm silicon
  • Baseline process:
    • Single full etch, using a negative resist (HSQ)
    • Oxide cladding
    • TiW metal heater, and Au metal bond pads
  • Details: Slides
    • design size: 470 µm height x 440 µm width
  • Process Design Kit: SiEPIC-EBeam-PDK

Layer table

Name Layer/datatype Description
Si 1/99 Layer to draw silicon geometries
M1_heater 11/0 Layer to draw metal heater, TiW
M2_router 12/0 Layer to draw metal routing, Au
Floorplan 99/0 Marks the layout design area
Text 10/0 Text labels for automated measurements
DevRec 68/0 Device recognition layer for component connectivity, netlist extraction, and verification
PinRec 1/10 Port/pins recognition layer for component connectivity, netlist extraction, and verification
Waveguide 1/99 Virtual layer, guiding shape for waveguides
SEM 200/0 Requests for SEM images. Rectangles in a 4:3 aspect

Submission instructions:

The submission involves several steps. First, you need to create your design(s) using the process design kit (PDK) for this specific fabrication run. Then you need to create a Fork of this repository, commit your design(s), ensure that it passes the checks, and create a pull request. Once your pull request is approved, your design(s) will be merged into the layout for fabrication. You should verify that your design is correctly merged. Once the designs are fabricated, they will be tested, and the measurement results will be posted in this repository.

Design software and PDK installation instructions:

  • Design tools and process design kit (SiEPIC-EBeam-PDK, KLayout implementation)installation instructions.
  • Automated measurement test routine is submitted as a YAML file that is created using the following utility:

pip install dreamcreator from dreamcreator import sequencecreator as sc sc.launch()

Submission via GitHub

  • Watch this video for a demonstration
  • Create an account on GitHub
  • Fork a copy of this GitHub repository into your own account: Create a new fork
  • Turn on the GitHub Actions on your forked repository: Actions (In your repository's page on GitHub, click on Actions in the top-menu bar, and Enable the workflows).
  • [Optional] Install GitHub Desktop (or git) on your computer, and Clone a local copy: Open with GitHub Desktop
  • Create your design, and ensure that the filename contains your edX.org username, and be formatted according to the course/workshop as follows:
  • Verify your design, using both:
    • Design Rule Check (DRC), to check for manufacturability. KLayout > SiEPIC > Verification > KLayout Design Rule Check (DRC) - EBeam, or press the "d" hotkey.
    • Functional Verification, to check for optical circuit connectivity, testability. KLayout > SiEPIC > Verification > Functional Layout Check, or press the "v" hotkey.
  • Create your YAML test routines file, following the same filename requirements as above, but ending with extension .yaml.
  • Ensure that your fork is up to date with the main SiEPIC repository. Click "Sync fork" image
  • Upload your design(s) into the "submissions" folder, as a binary file, namely a .gds (GDSII format) or .oas (OASIS format) file, and the YAML test routine file.
    • This can be done via the GitHub web page, by navigating to the submissions folder, then clicking on Add file, and Upload files.
    • Click Commit changes, and wait for the verification to complete
    • If there are errors, please review and correct the errors
  • Look for errors -- "All checks have failed" image
    • Click on Details
    • In the main, window expand the "Run layout verification"; see if there is a text description of the problem
    • Look for the Artifact file; download it and open it in KLayout
  • After fixing the errors, you should have a green check mark as follows: image
  • Alternatively upload your Python file, which will be compiled by a GitHub Action.
    • For KLayout designs, use the "submissions/KLayout Python" folder, namely a .py (Python format) file. e.g., EBeam_LukasChrostowski_MZI.py. The Python file should save a gds or oas file into the parent "submissions" folder. The Python script needs to be executable in non-GUI mode, namely using "import klayout SiEPIC SiEPIC-EBeam-PDK"
  • Check below for the merged design, and ensure that your design is correctly included
  • Create a Pull Request -- this will notify the team of your contribution, which we can aggregate into the main design file
  • Return to the main repository, and check for the merged design
image

Black-box cells (IP Replacement)

  • We perform IP replacement on several cells (grating couplers). We call these cells Black Box (BB), and you can identify them by _BB in the cell name, or the presence of the Blackbox layer 998/0 in the cell.
  • You must not change the name of the cell, the contents, nor cell origins. Otherwise, the replacement will not work correctly.

FYI – Automated GitHub Actions

The verification and merging is performed using GitHub actions. The repository implements the following:

  1. Running the files in the "submissions/KLayout Python" folder, to generate the designs
  2. Performing Manufacturing DRC verification on the designs in the "submissions" folder, and outputing the errors as an Artifact
  3. Performing Functional verification on the designs in the "submissions" folder, and outputing the errors as an Artifact
  4. Merging the designs from the "submissions" folder, and outputing merged layout as an Artifact

Latest Merge Layout File

https://github.com/SiEPIC/openEBL-2024-07-Si-Heaters/actions/runs/9943556617/artifacts/1702839721

About

Submission for fabrication of silicon photonics for a SiEPIC openEBL run

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • Python 100.0%